10 CFR 26.167 - Quality assurance and quality control.

Code of Federal Regulations, 2010 CFR

2010-01-01

... be designed, implemented, and reviewed to monitor the conduct of each step of the testing process. (b... sample and the error is determined to be technical or methodological, the licensee or other entity shall...

10 CFR 26.167 - Quality assurance and quality control.

Code of Federal Regulations, 2013 CFR

2013-01-01

... be designed, implemented, and reviewed to monitor the conduct of each step of the testing process. (b... sample and the error is determined to be technical or methodological, the licensee or other entity shall...

A Proposed Defect Tracking Model for Classifying the Inserted Defect Reports to Enhance Software Quality Control

PubMed Central

Khedr, Ayman E.; Sayed, Mostafa

2013-01-01

CONFLICT OF INTEREST: NONE DECLARED Defect tracking systems play an important role in the software development organizations as they can store historical information about defects. There are many research in defect tracking models and systems to enhance their capabilities to be more specifically tracking, and were adopted with new technology. Furthermore, there are different studies in classifying bugs in a step by step method to have clear perception and applicable method in detecting such bugs. This paper shows a new proposed defect tracking model for the purpose of classifying the inserted defects reports in a step by step method for more enhancement of the software quality. PMID:24039334

Quality Control Pathways for Nucleus-Encoded Eukaryotic tRNA Biosynthesis and Subcellular Trafficking

PubMed Central

Huang, Hsiao-Yun

2015-01-01

tRNAs perform an essential role in translating the genetic code. They are long-lived RNAs that are generated via numerous posttranscriptional steps. Eukaryotic cells have evolved numerous layers of quality control mechanisms to ensure that the tRNAs are appropriately structured, processed, and modified. We describe the known tRNA quality control processes that check tRNAs and correct or destroy aberrant tRNAs. These mechanisms employ two types of exonucleases, CCA end addition, tRNA nuclear aminoacylation, and tRNA subcellular traffic. We arrange these processes in order of the steps that occur from generation of precursor tRNAs by RNA polymerase (Pol) III transcription to end maturation and modification in the nucleus to splicing and additional modifications in the cytoplasm. Finally, we discuss the tRNA retrograde pathway, which allows tRNA reimport into the nucleus for degradation or repair. PMID:25848089

The Allergic Rhinitis Control Test questionnaire is valuable in guiding step-down pharmacotherapy treatment of allergic rhinitis.

PubMed

Zhu, Rongfei; Wang, Jingru; Wu, Yuying; Yang, Yongshi; Huang, Nan; Yang, Yaqi; Zhang, Rui; Ma, Dongxia; Yang, Lin; Demoly, Pascal

2018-06-07

Allergic Rhinitis Control Test(ARCT) has been validated in allergic rhinitis(AR) step-up pharmacotherapy management approach. The aim of our study was to evaluate the potential of ARCT in AR step-down pharmacotherapy. In an open-labelled randomized controlled study, AR patients controlled with intranasal corticosteroid(INS) plus antihistamine(step 4) were included and randomized into an ARCT or a control group. In ARCT group, the patients were followed up every 15 days; if ARCT score was ≥20(controlled AR), the patient would step down to step 3(INS), step 2(daily antihistamine), step 1(antihistamine as needed) and step 0(no medication) consecutively; if ARCT score was strictly <20, the treatment would not be adjusted. In the control group, patients would be treated with step 4 medications during the whole study. Rhinitis Quality-of-Life Questionnaire(RQLQ), Morisky Questionnaire and Brief Illness-Perception-Questionnaire(B-IPQ) were completed at baseline and the end of the study. Medication use and side effects were recorded. A total of 255 AR patients were enrolled into the study, 27 patients dropped out. The control rates at D45 were 77.8% in ARCT group and 85.8% in control group(P>0.05). ARCT group had less mean medication use than control group(INS 1.27 vs. 2.22 bottle, antihistamines 35.9 vs. 61.4 tablets)(P<0.05). RQLQ, Morisky and B-IPQ score were significantly improved in both groups after treatment(P<0.05). Stepping down AR medications in controlled patients led to similar clinical outcomes at reduced cost compared with those who maintained their current treatment level. ARCT is an optimal tool for evaluating the step-down eligibility. Copyright © 2018. Published by Elsevier Inc.

Development, optimization and validation of gas chromatographic fingerprinting of Brazilian commercial diesel fuel for quality control.

PubMed

dos Santos, Bruno César Diniz Brito; Flumignan, Danilo Luiz; de Oliveira, José Eduardo

2012-10-01

A three-step development, optimization and validation strategy is described for gas chromatography (GC) fingerprints of Brazilian commercial diesel fuel. A suitable GC-flame ionization detection (FID) system was selected to assay a complex matrix such as diesel. The next step was to improve acceptable chromatographic resolution with reduced analysis time, which is recommended for routine applications. Full three-level factorial designs were performed to improve flow rate, oven ramps, injection volume and split ratio in the GC system. Finally, several validation parameters were performed. The GC fingerprinting can be coupled with pattern recognition and multivariate regressions analyses to determine fuel quality and fuel physicochemical parameters. This strategy can also be applied to develop fingerprints for quality control of other fuel types.

Preliminary Quality Control System Design for the Pell Grant Program.

ERIC Educational Resources Information Center

Advanced Technology, Inc., Reston, VA.

A preliminary design for a quality control (QC) system for the Pell Grant Program is proposed, based on the needs of the Office of Student Financial Assistance (OSFA). The applicability of the general design for other student aid programs administered by OSFA is also considered. The following steps included in a strategic approach to QC system…

Sequence verification as quality-control step for production of cDNA microarrays.

PubMed

Taylor, E; Cogdell, D; Coombes, K; Hu, L; Ramdas, L; Tabor, A; Hamilton, S; Zhang, W

2001-07-01

To generate cDNA arrays in our core laboratory, we amplified about 2300 PCR products from a human, sequence-verified cDNA clone library. As a quality-control step, we sequenced the PCR products immediately before printing. The sequence information was used to search the GenBank database to confirm the identities. Although these clones were previously sequence verified by the company, we found that only 79% of the clones matched the original database after handling. Our experience strongly indicates the necessity to sequence verify the clones at the final stage before printing on microarray slides and to modify the gene list accordingly.

[Company Wide Quality Control (total quality): methodological principles and intervention techniques for step-by-step improvement].

PubMed

Corbara, F; Di Cristofaro, E

1996-01-01

The concept of Quality is particularly up to date and not a new one for the Journal. The need for better Quality is a must also in Medical care. Quality doesn't mean additional costs and excessive burden for the co-workers. On the contrary, initial costs can be compensated for through a more rational utilisation of the resources. The consequent better service for the patient results in an ameliorated working environment, with high profits. Fundamental requirements for reaching concrete results are: 1) the convinced involvement in the idea of all levels (division, service, laboratory) in order to have the different groups act in synergism towards common goals; 2) the knowledge of appropriate methods. The Authors examine this last point with a deep analysis of the techniques involved in Company Wide Quality Control (C.W.Q.C.) or Total Quality. The improving process has to the continuous and proceed in small steps, each time being constituted by 4 different phases, represented by the PDCA cycle, or Demining wheel, where: P = PLAN, which means plan before acting; D = DO, perform what has been planned; C = CHECK, verify the results; A = ACT, standardize if the results are positive, repeat the process if negative. Each process of improvement implies a prior precise definition of a project, i.e. a problem whose solution has been planned. The project must always presume: a specific subject--a goal--one or more people to reach it--a limited time to work it out. The most effective way to ameliorate Quality is performing projects. Step by Step amelioration is synonymous of performance of many projects. A brilliant way to produce many projects remains their "industrialization", which can be reached by means of 6 basic criteria: 1) full involvement of the Direction; 2) potential co-working in the projects of all employees; 3) employment of simple instruments; 4) respect of a few procedural formalities; 5) rewarding of personnel; 6) continuous promotion of the concepts of quality and ongoing improvement. The Authors describe for each of the previous criteria approaching methods and best operative techniques, according C.W.Q.C.

PLC based automatic control of pasteurize mix in ice cream production

NASA Astrophysics Data System (ADS)

Yao, Xudong; Liang, Kai

2013-03-01

This paper describes the automatic control device of pasteurized mix in the ice cream production process.We design a scheme of control system using FBD program language and develop the programmer in the STEP 7-Micro/WIN software, check for any bugs before downloading into PLC .These developed devices will able to provide flexibility and accuracy to control the step of pasteurized mix. The operator just Input the duration and temperature of pasteurized mix through control panel. All the steps will finish automatically without any intervention in a preprogrammed sequence stored in programmable logic controller (PLC). With the help of this equipment we not only can control the quality of ice cream for various conditions, but also can simplify the production process. This control system is inexpensive and can be widely used in ice cream production industry.

Pulse-Flow Microencapsulation System

NASA Technical Reports Server (NTRS)

Morrison, Dennis R.

2006-01-01

The pulse-flow microencapsulation system (PFMS) is an automated system that continuously produces a stream of liquid-filled microcapsules for delivery of therapeutic agents to target tissues. Prior microencapsulation systems have relied on batch processes that involve transfer of batches between different apparatuses for different stages of production followed by sampling for acquisition of quality-control data, including measurements of size. In contrast, the PFMS is a single, microprocessor-controlled system that performs all processing steps, including acquisition of quality-control data. The quality-control data can be used as real-time feedback to ensure the production of large quantities of uniform microcapsules.

Linked Analysis of East Asia Emission Reduction Pathways

NASA Astrophysics Data System (ADS)

Kim, Y.; Woo, J. H.; Bu, C.; Lee, Y.; Kim, J.; Jang, Y.; Park, M.

2017-12-01

Air pollution and its impacts over the Northeast Asia are very severe because of the massive pollutant emissions and high population. Korea has been trying to improve air quality with the enhanced environmental legislation. The air quality over Korea, however, does not entirely dependent on its local emissions. Transboundary air pollution from China highly affects Korean atmosphere. The purpose of this research is to understand role of local and transbounday efforts to improve air quality changes over Korea. In this research, we have tried to set up the multiple emission scenario pathways for Korea and China using IIASA's GAINS (Greenhouse gas - Air pollution Interactions aNd Synergies) modeling framework. More up-to-date growth factors and control policy packets were made using regional socio-economic data and control policy information from local governments and international statistics. Four major scenario pathways, 1) Base (Baseline: current legislation), 2) OTB/OTB(On the book/On the way : existing control measure/planed control measure), 3) BOTW_GHG(Beyond on the way : OTW with GHG reduction plan), 4) BOTW_NH3 (OTW with additional NH3 reduction measure) were developed to represent air quality improvement pathways in consideration of both Korean and Chinese efforts. Strict ambient PM2.5 standards from Seoul metropolitan Air quality Improvement Plan(SAIP) seems too enthusiastic without linking air quality control efforts of China. Step-by-step emission controls and following air quality, control cost, health impact from each scenario will be presented at the conference. This subject is supported by Korea Ministry of Environment as "Climate Change Correspondence Program". And This work was supported under the framework of national strategy project on fine particulate matters by Ministry of Science, ICT and Future Planning.

Quality control tests of lab-reared Cydia pomonella and Cactoblastis cactorum field performance: Comparison of laboratory and field bioassays.

USDA-ARS?s Scientific Manuscript database

Research, operational, and commercial programs which rely on mass-reared insects of high quality and performance, need accurate methods for monitoring quality degradation during each step of production, handling and release. With continued interest in the use of the sterile insect technique (SIT) a...

An overview on STEP-NC compliant controller development

NASA Astrophysics Data System (ADS)

Othman, M. A.; Minhat, M.; Jamaludin, Z.

2017-10-01

The capabilities of conventional Computer Numerical Control (CNC) machine tools as termination organiser to fabricate high-quality parts promptly, economically and precisely are undeniable. To date, most CNCs follow the programming standard of ISO 6983, also called G & M code. However, in fluctuating shop floor environment, flexibility and interoperability of current CNC system to react dynamically and adaptively are believed still limited. This outdated programming language does not explicitly relate to each other to have control of arbitrary locations other than the motion of the block-by-block. To address this limitation, new standard known as STEP-NC was developed in late 1990s and is formalized as an ISO 14649. It adds intelligence to the CNC in term of interoperability, flexibility, adaptability and openness. This paper presents an overview of the research work that have been done in developing a STEP-NC controller standard and the capabilities of STEP-NC to overcome modern manufacturing demands. Reviews stated that most existing STEP-NC controller prototypes are based on type 1 and type 2 implementation levels. There are still lack of effort being done to develop type 3 and type 4 STEP-NC compliant controller.

Automatic Rotational Sky Quality Meter (R-SQM) Design and Software for Astronomical Observatories

NASA Astrophysics Data System (ADS)

Dogan, E.; Ozbaldan, E. E.; Shameoni, Niaei M.; Yesilyaprak, C.

2016-12-01

We have presented the new design of Sky Quality Meter (SQM) device that is an automatic rotational model of sky quality meter (R-SQM) carried out by DAG (Eastern Anatolia Observatory) Technical Team. R-SQM is required for determining the long-term changes of sky quality of an astronomical observatory and consists of four SQM devices mounted on a rotating shaft with different angles for scanning all sky. This system is controlled by a Raspberry Pi control card and a step motor with its driver and a special software.

pGlyco 2.0 enables precision N-glycoproteomics with comprehensive quality control and one-step mass spectrometry for intact glycopeptide identification.

PubMed

Liu, Ming-Qi; Zeng, Wen-Feng; Fang, Pan; Cao, Wei-Qian; Liu, Chao; Yan, Guo-Quan; Zhang, Yang; Peng, Chao; Wu, Jian-Qiang; Zhang, Xiao-Jin; Tu, Hui-Jun; Chi, Hao; Sun, Rui-Xiang; Cao, Yong; Dong, Meng-Qiu; Jiang, Bi-Yun; Huang, Jiang-Ming; Shen, Hua-Li; Wong, Catherine C L; He, Si-Min; Yang, Peng-Yuan

2017-09-05

The precise and large-scale identification of intact glycopeptides is a critical step in glycoproteomics. Owing to the complexity of glycosylation, the current overall throughput, data quality and accessibility of intact glycopeptide identification lack behind those in routine proteomic analyses. Here, we propose a workflow for the precise high-throughput identification of intact N-glycopeptides at the proteome scale using stepped-energy fragmentation and a dedicated search engine. pGlyco 2.0 conducts comprehensive quality control including false discovery rate evaluation at all three levels of matches to glycans, peptides and glycopeptides, improving the current level of accuracy of intact glycopeptide identification. The N-glycoproteome of samples metabolically labeled with 15 N/ 13 C were analyzed quantitatively and utilized to validate the glycopeptide identification, which could be used as a novel benchmark pipeline to compare different search engines. Finally, we report a large-scale glycoproteome dataset consisting of 10,009 distinct site-specific N-glycans on 1988 glycosylation sites from 955 glycoproteins in five mouse tissues.Protein glycosylation is a heterogeneous post-translational modification that generates greater proteomic diversity that is difficult to analyze. Here the authors describe pGlyco 2.0, a workflow for the precise one step identification of intact N-glycopeptides at the proteome scale.

UrQt: an efficient software for the Unsupervised Quality trimming of NGS data.

PubMed

Modolo, Laurent; Lerat, Emmanuelle

2015-04-29

Quality control is a necessary step of any Next Generation Sequencing analysis. Although customary, this step still requires manual interventions to empirically choose tuning parameters according to various quality statistics. Moreover, current quality control procedures that provide a "good quality" data set, are not optimal and discard many informative nucleotides. To address these drawbacks, we present a new quality control method, implemented in UrQt software, for Unsupervised Quality trimming of Next Generation Sequencing reads. Our trimming procedure relies on a well-defined probabilistic framework to detect the best segmentation between two segments of unreliable nucleotides, framing a segment of informative nucleotides. Our software only requires one user-friendly parameter to define the minimal quality threshold (phred score) to consider a nucleotide to be informative, which is independent of both the experiment and the quality of the data. This procedure is implemented in C++ in an efficient and parallelized software with a low memory footprint. We tested the performances of UrQt compared to the best-known trimming programs, on seven RNA and DNA sequencing experiments and demonstrated its optimality in the resulting tradeoff between the number of trimmed nucleotides and the quality objective. By finding the best segmentation to delimit a segment of good quality nucleotides, UrQt greatly increases the number of reads and of nucleotides that can be retained for a given quality objective. UrQt source files, binary executables for different operating systems and documentation are freely available (under the GPLv3) at the following address: https://lbbe.univ-lyon1.fr/-UrQt-.html .

Eutrophication of lakes and reservoirs: A framework for making management decisions

USGS Publications Warehouse

Rast, W.; Holland, M.

1988-01-01

The development of management strategies for the protection of environmental quality usually involves consideration both of technical and nontechnical issues. A logical, step-by-step framework for development of such strategies is provided. Its application to the control of cultured eutrophication of lakes and reservoirs illustrates its potential usefulness. From the perspective of the policymaker, the main consideration is that the eutrophication-related water quality of a lake or reservoir can be managed for given water uses. The approach presented here allows the rational assessment of relevant water-quality parameters and establishment of water-quality goals, consideration of social and other nontechnical issues, the possibilities of public involvement in the decision-making process, and a reasonable economic analysis within a management framework.

Study of aroma formation and transformation during the manufacturing process of Biluochun green tea in Yunnan Province by HS-SPME and GC-MS.

PubMed

Wang, Chen; Lv, Shidong; Wu, Yuanshuang; Lian, Ming; Gao, Xuemei; Meng, Qingxiong

2016-10-01

Biluochun is a typical non-fermented tea and is also famous for its unique aroma in China. Few studies have been performed to evaluate the effect of the manufacturing process on the formation and content of its aroma. The volatile components were extracted at different manufacturing process steps of Biluochun green tea using fully automated headspace solid-phase microextraction (HS-SPME) and further characterised by gas chromatography-mass spectrometry (GC-MS). Among 67 volatile components collected, the fractions of linalool oxides, β-ionone, phenylacetaldehyde, aldehydes, ketones, and nitrogen compounds were increased while alcohols and hydrocarbons declined during the manufacturing process. The aroma compounds decreased the most during the drying steps. We identified a number of significantly changed components that can be used as markers and quality control during the producing process of Biluochun. The drying step played a major role in the aroma formation of green tea products and should be the most important step for quality control. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Development and expansion of high-quality control region databases to improve forensic mtDNA evidence interpretation.

PubMed

Irwin, Jodi A; Saunier, Jessica L; Strouss, Katharine M; Sturk, Kimberly A; Diegoli, Toni M; Just, Rebecca S; Coble, Michael D; Parson, Walther; Parsons, Thomas J

2007-06-01

In an effort to increase the quantity, breadth and availability of mtDNA databases suitable for forensic comparisons, we have developed a high-throughput process to generate approximately 5000 control region sequences per year from regional US populations, global populations from which the current US population is derived and global populations currently under-represented in available forensic databases. The system utilizes robotic instrumentation for all laboratory steps from pre-extraction through sequence detection, and a rigorous eight-step, multi-laboratory data review process with entirely electronic data transfer. Over the past 3 years, nearly 10,000 control region sequences have been generated using this approach. These data are being made publicly available and should further address the need for consistent, high-quality mtDNA databases for forensic testing.

Addressable-Matrix Integrated-Circuit Test Structure

NASA Technical Reports Server (NTRS)

Sayah, Hoshyar R.; Buehler, Martin G.

1991-01-01

Method of quality control based on use of row- and column-addressable test structure speeds collection of data on widths of resistor lines and coverage of steps in integrated circuits. By use of straightforward mathematical model, line widths and step coverages deduced from measurements of electrical resistances in each of various combinations of lines, steps, and bridges addressable in test structure. Intended for use in evaluating processes and equipment used in manufacture of application-specific integrated circuits.

Machine Learning: A Crucial Tool for Sensor Design

PubMed Central

Zhao, Weixiang; Bhushan, Abhinav; Santamaria, Anthony D.; Simon, Melinda G.; Davis, Cristina E.

2009-01-01

Sensors have been widely used for disease diagnosis, environmental quality monitoring, food quality control, industrial process analysis and control, and other related fields. As a key tool for sensor data analysis, machine learning is becoming a core part of novel sensor design. Dividing a complete machine learning process into three steps: data pre-treatment, feature extraction and dimension reduction, and system modeling, this paper provides a review of the methods that are widely used for each step. For each method, the principles and the key issues that affect modeling results are discussed. After reviewing the potential problems in machine learning processes, this paper gives a summary of current algorithms in this field and provides some feasible directions for future studies. PMID:20191110

A Study of University Efforts to Provide Students with the Ability to Comprehend and Apply Total Quality Principles in Their Fields of Study

DTIC Science & Technology

1993-09-01

Geber , 1990:30-31). These steps are a formula to implement and measure quality in a service organization. While guidelines such as these apply to...1991. Evans, James R. and William M. Lindsay. The Management and Control of Quality. Minneapolis/St. Paul: West Publishing Company, 1993. Geber

Quality control in the development of coagulation factor concentrates.

PubMed

Snape, T J

1987-01-01

Limitation of process change is a major factor contributing to assurance of quality in pharmaceutical manufacturing. This is particularly true in the manufacture of coagulation factor concentrates, for which presumptive testing for poorly defined product characteristics is an integral feature of finished product quality control. The development of new or modified preparations requires that this comfortable position be abandoned, and that the effect on finished product characteristics of changes to individual process steps (and components) be assessed. The degree of confidence in the safety and efficacy of the new product will be determined by, amongst other things, the complexity of the process alteration and the extent to which the results of finished product tests can be considered predictive. The introduction of a heat-treatment step for inactivation of potential viral contaminants in coagulation factor concentrates presents a significant challenge in both respects, quite independent of any consideration of assessment of the effectiveness of the viral inactivation step. These interactions are illustrated by some of the problems encountered with terminal dry heat-treatment (72 h. at 80 degrees C) of factor VIII and prothrombin complex concentrates manufactured by the Blood Products Laboratory.

Parental qualities as perceived by borderline personality disorders.

PubMed

Goldberg, R L; Mann, L S; Wise, T N; Segall, E A

1985-01-01

This study explores the contribution of parental qualities to the borderline personality disorder. The Parental Bonding Inventory is used to compare four parental qualities (caring mother, caring father, overprotective father, and overprotective mother) across three groups (borderline personality disorders, assorted psychiatric controls and normal controls). The major finding was that the borderline patients perceived their parents to be significantly less caring and more overprotective than both the psychiatric control or nonclinical control groups. This study was verified previous reports that patients diagnosed with an affective illness (in either the borderline group or psychiatric control group) reported no significant differences on the inventory. Pinpointing parental characteristics which antecede mental disorders may be an important first step in devising primary preventive interventions for adult disorders.

The Fungus among Us.

ERIC Educational Resources Information Center

Weidner, Robert H.

2003-01-01

Offers tips for fighting mold in schools, asserting that it can contribute significantly to poor indoor air quality and sick building syndrome. Offers an overview on mold and discusses the steps of: humidity control, building inspections, condensation control or removal, and floor and carpet cleaning. (EV)

5 CFR 531.508 - Evaluation of quality step increase authority.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Evaluation of quality step increase... REGULATIONS PAY UNDER THE GENERAL SCHEDULE Quality Step Increases § 531.508 Evaluation of quality step... grant quality step increases. The agency shall take any corrective action required by the Office. [60 FR...

5 CFR 531.503 - Purpose of quality step increases.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Purpose of quality step increases. 531... PAY UNDER THE GENERAL SCHEDULE Quality Step Increases § 531.503 Purpose of quality step increases. The purpose of quality step increases is to provide appropriate incentives and recognition for excellence in...

5 CFR 531.505 - Restrictions on granting quality step increases.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Restrictions on granting quality step... REGULATIONS PAY UNDER THE GENERAL SCHEDULE Quality Step Increases § 531.505 Restrictions on granting quality step increases. As provided by 5 U.S.C. 5336, a quality step increase may not be granted to an employee...

The Individualized Quality Control Plan - Coming Soon to Clinical Microbiology Laboratories Everywhere!

PubMed

Anderson, Nancy

2015-11-15

As of January 1, 2016, microbiology laboratories can choose to adopt a new quality control option, the Individualized Quality Control Plan (IQCP), under the Clinical Laboratory Improvement Amendments of 1988 (CLIA). This voluntary approach increases flexibility for meeting regulatory requirements and provides laboratories the opportunity to customize QC for their testing in their unique environments and by their testing personnel. IQCP is an all-inclusive approach to quality based on risk management to address potential errors in the total testing process. It includes three main steps, (1) performing a risk assessment, (2) developing a QC plan, and (3) monitoring the plan through quality assessment. Resources are available from the Centers for Medicare & Medicaid Services, Centers for Disease Control and Prevention, American Society for Microbiology, Clinical and Laboratory Standards Institute, and accrediting organizations, such as the College of American Pathologists and Joint Commission, to assist microbiology laboratories implementing IQCP.

Standard Printing Screen System.

DTIC Science & Technology

area pattern screens. It also describes the creation of a 100-step continuous growth halftone scale for the purpose of specifying quality control tolerances of screen tints for the printed product. (Author)

2D AND 3D KINEMATICS DURING LATERAL STEP-DOWN TESTING IN INDIVIDUALS WITH ANTERIOR CRUCIATE LIGAMENT RECONSTRUCTION.

PubMed

Mostaed, Maria F; Werner, David M; Barrios, Joaquin A

2018-02-01

The lateral step-down test is an established clinical evaluation tool to assess quality of movement in patients with knee disorders. However, this test has not been investigated in individuals after anterior cruciate ligament reconstruction (ACLR) in association with quantitative 3D motion analysis. The purpose of this study was to determine the strength of association between visually-assessed quality of movement during the lateral step-down test and 3D lower limb kinematics in patients with history of ACLR. A second purpose was to compare kinematics between subgroups based on the presence or absence of faulty alignments during the task. The final purpose was to compare visually-assessed quality of movement scores between box heights during lateral step-down testing. Twenty subjects at least one year status post-ACLR (18 females, age of 24.5 ± 4.6 years and body mass index of 23.4 ± 2.3 kg/m 2 ) performed the lateral step-down test unilaterally on the surgical limb atop four and six inch boxes. A board-certified orthopedic physical therapist scored overall quality of movement during the lateral step-down test using established criteria during 2D video playback. Lower limb kinematics were simultaneously collected using 3D motion capture. An alpha level of 0.05 was used for all statistical treatments. Overall 2D quality of movement score significantly correlated (r =0.47-0.57) with 3D hip adduction and hip internal rotation across box heights. Across box heights, the presence of faulty pelvic alignment differentiated a subgroup exhibiting less peak knee flexion, and the presence of faulty knee alignment differentiated a subgroup exhibiting greater peak hip adduction. The six inch box elicited worse quality of movement compared to the four inch box. These results suggest that visually-assessed quality of movement is associated with several kinematic variables after ACLR. 2D movement deviations at the pelvis appear to consistently relate to less knee flexion, and 2D deviations at the knee appear to suggest greater hip adduction. Generally, poorer quality of movement was observed for the six inch box height. Clinically, these data suggest that interventions targeting hip abductor and knee extensor strength and neuromuscular control may be useful in the presence of poor quality of movement during lateral step-down testing. 2b.

5 CFR 531.506 - Effective date of a quality step increase.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Effective date of a quality step increase... REGULATIONS PAY UNDER THE GENERAL SCHEDULE Quality Step Increases § 531.506 Effective date of a quality step increase. The quality step increase should be made effective as soon as practicable after it is approved...

Neural Network based Control of SG based Standalone Generating System with Energy Storage for Power Quality Enhancement

NASA Astrophysics Data System (ADS)

Nayar, Priya; Singh, Bhim; Mishra, Sukumar

2017-08-01

An artificial intelligence based control algorithm is used in solving power quality problems of a diesel engine driven synchronous generator with automatic voltage regulator and governor based standalone system. A voltage source converter integrated with a battery energy storage system is employed to mitigate the power quality problems. An adaptive neural network based signed regressor control algorithm is used for the estimation of the fundamental component of load currents for control of a standalone system with load leveling as an integral feature. The developed model of the system performs accurately under varying load conditions and provides good dynamic response to the step changes in loads. The real time performance is achieved using MATLAB along with simulink/simpower system toolboxes and results adhere to an IEEE-519 standard for power quality enhancement.

Significant improvement of the quality of bystander first aid using an expert system with a mobile multimedia device.

PubMed

Ertl, Lorenz; Christ, Frank

2007-08-01

Better quality bystander first-aid could improve outcome rates for emergency victims significantly. In this case-control study, we hypothesised that expert knowledge presented step-by-step to untrained helpers using a personal digital assistant (PDA), would improve the quality of bystanders basic life support. We confronted 101 lay-helpers with two standard emergency situations. (1) An unconscious trauma victim with severe bleeding. (2) Cardiopulmonary resuscitation (CPR). Performance was assessed using an Objective Structured Clinical Examination (OSCE). One group was supported by a PDA providing visual and audio instructions, whereas the control group acted only with their current knowledge. The expert system was programmed in HTML-code and displayed on the PDA's Internet browser. The maximum score obtainable was 24 points corresponding to optimal treatment. The control group without the PDA reached 14.8+/-3.5 (mean value+/-standard deviation), whereas the PDA supported group scored significantly higher (21.9+/-2.7, p<0.01). The difference in performance was measurable in all criteria tested and particularly notable in the items: placing in recovery position, airway management and quality of CPR. The PDA based expert system increased the performance of untrained helpers supplying emergency care significantly. Since Internet compatible mobile devices have become widely available, a significant quality improvement in bystander first-aid seems possible.

[Development of whole process quality control and management system of traditional Chinese medicine decoction pieces based on traditional Chinese medicine quality tree].

PubMed

Yu, Wen-Kang; Dong, Ling; Pei, Wen-Xuan; Sun, Zhi-Rong; Dai, Jun-Dong; Wang, Yun

2017-12-01

The whole process quality control and management of traditional Chinese medicine (TCM) decoction pieces is a system engineering, involving the base environment, seeds and seedlings, harvesting, processing and other multiple steps, so the accurate identification of factors in TCM production process that may induce the quality risk, as well as reasonable quality control measures are very important. At present, the concept of quality risk is mainly concentrated in the aspects of management and regulations, etc. There is no comprehensive analysis on possible risks in the quality control process of TCM decoction pieces, or analysis summary of effective quality control schemes. A whole process quality control and management system for TCM decoction pieces based on TCM quality tree was proposed in this study. This system effectively combined the process analysis method of TCM quality tree with the quality risk management, and can help managers to make real-time decisions while realizing the whole process quality control of TCM. By providing personalized web interface, this system can realize user-oriented information feedback, and was convenient for users to predict, evaluate and control the quality of TCM. In the application process, the whole process quality control and management system of the TCM decoction pieces can identify the related quality factors such as base environment, cultivation and pieces processing, extend and modify the existing scientific workflow according to their own production conditions, and provide different enterprises with their own quality systems, to achieve the personalized service. As a new quality management model, this paper can provide reference for improving the quality of Chinese medicine production and quality standardization. Copyright© by the Chinese Pharmaceutical Association.

The importance of a two-step impression procedure for complete denture fabrication: a systematic review of the literature.

PubMed

Regis, R R; Alves, C C S; Rocha, S S M; Negreiros, W A; Freitas-Pontes, K M

2016-10-01

The literature has questioned the real need for some clinical and laboratory procedures considered essential for achieving better results for complete denture fabrication. The aim of this study was to review the current literature concerning the relevance of a two-step impression procedure to achieve better clinical results in fabricating conventional complete dentures. Through an electronic search strategy of the PubMed/MEDLINE database, randomised controlled clinical trials which compared complete denture fabrication in adults in which one or two steps of impressions occurred were identified. The selections were made by three independent reviewers. Among the 540 titles initially identified, four studies (seven published papers) reporting on 257 patients evaluating aspects such as oral health-related quality of life, patient satisfaction with dentures in use, masticatory performance and chewing ability, denture quality, direct and indirect costs were considered eligible. The quality of included studies was assessed according to the Cochrane guidelines. The clinical studies considered for this review suggest that a two-step impression procedure may not be mandatory for the success of conventional complete denture fabrication regarding a variety of clinical aspects of denture quality and patients' perceptions of the treatment. © 2016 John Wiley & Sons Ltd.

Control control control: a reassessment and comparison of GenBank and chromatogram mtDNA sequence variation in Baltic grey seals (Halichoerus grypus).

PubMed

Fietz, Katharina; Graves, Jeff A; Olsen, Morten Tange

2013-01-01

Genetic data can provide a powerful tool for those interested in the biology, management and conservation of wildlife, but also lead to erroneous conclusions if appropriate controls are not taken at all steps of the analytical process. This particularly applies to data deposited in public repositories such as GenBank, whose utility relies heavily on the assumption of high data quality. Here we report on an in-depth reassessment and comparison of GenBank and chromatogram mtDNA sequence data generated in a previous study of Baltic grey seals. By re-editing the original chromatogram data we found that approximately 40% of the grey seal mtDNA haplotype sequences posted in GenBank contained errors. The re-analysis of the edited chromatogram data yielded overall similar results and conclusions as the original study. However, a significantly different outcome was observed when using the uncorrected dataset based on the GenBank haplotypes. We therefore suggest disregarding the existing GenBank data and instead using the correct haplotypes reported here. Our study serves as an illustrative example reiterating the importance of quality control through every step of a research project, from data generation to interpretation and submission to an online repository. Errors conducted in any step may lead to biased results and conclusions, and could impact management decisions.

Control Control Control: A Reassessment and Comparison of GenBank and Chromatogram mtDNA Sequence Variation in Baltic Grey Seals (Halichoerus grypus)

PubMed Central

Fietz, Katharina; Graves, Jeff A.; Olsen, Morten Tange

2013-01-01

Genetic data can provide a powerful tool for those interested in the biology, management and conservation of wildlife, but also lead to erroneous conclusions if appropriate controls are not taken at all steps of the analytical process. This particularly applies to data deposited in public repositories such as GenBank, whose utility relies heavily on the assumption of high data quality. Here we report on an in-depth reassessment and comparison of GenBank and chromatogram mtDNA sequence data generated in a previous study of Baltic grey seals. By re-editing the original chromatogram data we found that approximately 40% of the grey seal mtDNA haplotype sequences posted in GenBank contained errors. The re-analysis of the edited chromatogram data yielded overall similar results and conclusions as the original study. However, a significantly different outcome was observed when using the uncorrected dataset based on the GenBank haplotypes. We therefore suggest disregarding the existing GenBank data and instead using the correct haplotypes reported here. Our study serves as an illustrative example reiterating the importance of quality control through every step of a research project, from data generation to interpretation and submission to an online repository. Errors conducted in any step may lead to biased results and conclusions, and could impact management decisions. PMID:23977362

5 CFR 531.504 - Level of performance required for quality step increase.

Code of Federal Regulations, 2010 CFR

2010-01-01

... step increase. 531.504 Section 531.504 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PAY UNDER THE GENERAL SCHEDULE Quality Step Increases § 531.504 Level of performance required for quality step increase. A quality step increase shall not be required but may be granted only...

Nonlinear Multiscale Transformations: From Synchronization to Error Control

DTIC Science & Technology

2001-07-01

transformation (plus the quantization step) has taken place, a lossless Lempel - Ziv compression algorithm is applied to reduce the size of the transformed... compressed data are all very close, however the visual quality of the reconstructed image is significantly better for the EC compression algorithm ...used in recent times in the first step of transform coding algorithms for image compression . Ideally, a multiscale transformation allows for an

Commercialising genetically engineered animal biomedical products.

PubMed

Sullivan, Eddie J; Pommer, Jerry; Robl, James M

2008-01-01

Research over the past two decades has increased the quality and quantity of tools available to produce genetically engineered animals. The number of potentially viable biomedical products from genetically engineered animals is increasing. However, moving from cutting-edge research to development and commercialisation of a biomedical product that is useful and wanted by the public has significant challenges. Even early stage development of genetically engineered animal applications requires consideration of many steps, including quality assurance and quality control, risk management, gap analysis, founder animal establishment, cell banking, sourcing of animals and animal-derived material, animal facilities, product collection facilities and processing facilities. These steps are complicated and expensive. Biomedical applications of genetically engineered animals have had some recent successes and many applications are well into development. As researchers consider applications for their findings, having a realistic understanding of the steps involved in the development and commercialisation of a product, produced in genetically engineered animals, is useful in determining the risk of genetic modification to the animal nu. the potential public benefit of the application.

Effectiveness of a facebook-delivered physical activity intervention for post-partum women: a randomized controlled trial protocol.

PubMed

Kernot, Jocelyn; Olds, Tim; Lewis, Lucy K; Maher, Carol

2013-05-29

Physical activity is reduced during the post-partum period. Facebook is frequently used by Australian mothers, and offers flexibility, high levels of engagement and the ability to disseminate information and advice via social contacts. The Mums Step it Up Program is a newly developed 50 day team-based physical activity intervention delivered via a Facebook app. The program involves post-partum women working in teams of 4-8 friends aiming to achieve 10,000 steps per day measured by a pedometer. Women are encouraged to use the app to log their daily steps and undertake social and supportive interactions with their friends and other participants. This study aims to determine the effectiveness of the Mums Step it Up Program. A sample of 126 women up to 12 months post-partum will be recruited through community-based health and family services. Participants will be randomly allocated into one of three groups: control, pedometer only and the Mums Step it Up Program. Assessments will be completed at baseline, 6 weeks and 6 months. The primary outcome (objective physical activity) and the secondary outcomes (sleep quality and quantity, depressive symptoms, weight and quality of life) will be used to determine the effectiveness of the Mums Step it Up Program compared with the control and pedometer only groups. Analyses will be undertaken on an intention-to-treat-basis using random effects mixed modeling. The effect of theorized mediators (physical activity attitudes, subjective norms and perceived behavioral control) will also be examined. This study will provide information about the potential of a Facebook app for the delivery of health behavior interventions. If this intervention proves to be effective it will be released on a mass scale and promoted to the general public. Australia and New Zealand Clinical Trials Register: ACTRN12613000069752.

Is My Small School Really Just a Business.

ERIC Educational Resources Information Center

Ross, Lee A.; Chance, W. G.

1984-01-01

Discusses steps necessary to running small schools on a more business-like basis, including quality control, product (student) evaluation, production process monitoring, establishment of standards, improved recruitment, market research, and sales promotion. (MH)

Searching for disability in electronic databases of published literature.

PubMed

Walsh, Emily S; Peterson, Jana J; Judkins, Dolores Z

2014-01-01

As researchers in disability and health conduct systematic reviews with greater frequency, the definition of disability used in these reviews gains importance. Translating a comprehensive conceptual definition of "disability" into an operational definition that utilizes electronic databases in the health sciences is a difficult step necessary for performing systematic literature reviews in the field. Consistency of definition across studies will help build a body of evidence that is comparable and amenable to synthesis. To illustrate a process for operationalizing the World Health Organization's International Classification of Disability, Functioning, and Health concept of disability for MEDLINE, PsycINFO, and CINAHL databases. We created an electronic search strategy in conjunction with a reference librarian and an expert panel. Quality control steps included comparison of search results to results of a search for a specific disabling condition and to articles nominated by the expert panel. The complete search strategy is presented. Results of the quality control steps indicated that our strategy was sufficiently sensitive and specific. Our search strategy will be valuable to researchers conducting literature reviews on broad populations with disabilities. Copyright © 2014 Elsevier Inc. All rights reserved.

[Role of medical information processing for quality assurance in obstetrics].

PubMed

Selbmann, H K

1983-06-01

The paradigma of problem-orientated assuring of the professional quality of medical case is a kind of "control loop system" consisting of the following 5 steps: routine observation, identification of the problem, analysis of the problem, translation of problem solutions into daily practice and control as to whether the problem has been solved or eliminated. Medical data processing, which involves documentation, electronic data processing and statistics, can make substantial contributions especially to the steps of observation, identification of the problem, and follow-up control. Perinatal data collection, which has already been introduced in 6 Länder of the Federal Republic of Germany, has supplied ample proof of this. These operations were conducted under the heading "internal clinical assuring of quality with external aid". Those clinics who participated in this programme, were given the necessary aid in self-observation (questionnaires, clinical statistics), and they were also given comparative informative data to help them in identifying the problems (clinical profiles, etc.). It is entirely left to the responsibility of the clinics themselves--voluntary cooperation and guarantee of remaining anonymous being a matter of course -- to draw their own consequences from the collected data and to translate these into clinical everyday practice.

Protocol for the "four steps to control your fatigue (4-STEPS)" randomised controlled trial: a self-regulation based physical activity intervention for patients with unexplained chronic fatigue

PubMed Central

2012-01-01

Background Unexplained Chronic Fatigue is a medical condition characterized by the presence of persistent, severe and debilitating medically unexplained fatigue, leading to impaired functioning and lower quality of life. Research suggests that physical activity can contribute to the reduction of fatigue and other somatic symptoms and can thus significantly improve physical functioning and quality of life in these patients. Based on the self-regulation (SR) theory of behaviour change, we developed a brief physical activity program for patients suffering from unexplained chronic fatigue which focuses on the training of self-regulation skills, the "4-STEPS to control your fatigue" program. Methods/Design This is a multi-centre, randomised controlled trial (RCT) that will be carried out in local primary care centres and at the Portuguese Fibromyalgia and Chronic Fatigue Syndrome Patients Association. Patients aged between 18 and 65 and fulfilling operationalized criteria for Idiopathic Chronic Fatigue (ICF) and Chronic Fatigue Syndrome (CFS) will be recruited and randomly allocated to standard care (SC) or standard care plus a self-regulation based physical activity program (4-STEPS). Patients will be assessed at baseline, after the intervention (3 months) and at 12 months follow-up. The primary outcome is fatigue severity. Discussion The results of the RCT will provide information about the effectiveness of a brief self-regulation intervention for promoting physical activity in patients with unexplained chronic fatigue. If the program proves to be effective, it may be considered as an adjunctive treatment for these patients. Trial Registration ISRCTN: ISRCTN70763996 PMID:22429404

Modifying the Sleep Treatment Education Program for Students to include technology use (STEPS-TECH): Intervention effects on objective and subjective sleep outcomes.

PubMed

Barber, Larissa K; Cucalon, Maria S

2017-12-01

University students often have sleep issues that arise from poor sleep hygiene practices and technology use patterns. Yet, technology-related behaviors are often neglected in sleep hygiene education. This study examined whether the Sleep Treatment Education Program for Students-modified to include information regarding managing technology use (STEPS-TECH)-helps improve both subjective and objective sleep outcomes among university students. Results of an experimental study among 78 university students showed improvements in objective indicators of sleep quantity (total sleep time) and sleep quality (less awakenings) during the subsequent week for students in the STEPS-TECH intervention group compared to a control group. Exploratory analyses indicated that effects were driven by improvements in weekend days immediately following the intervention. There were also no intervention effects on subjective sleep quality or quantity outcomes. In terms of self-reported behavioral responses to educational content in the intervention, there were no group differences in sleep hygiene practices or technology use before bedtime. However, the intervention group reported less technology use during sleep periods than the control group. These preliminary findings suggest that STEPS-TECH may be a useful educational tool to help improve objective sleep and reduce technology use during sleep periods among university students. Copyright © 2017 John Wiley & Sons, Ltd.

Application of the Quality by Design Approach to the Freezing Step of Freeze-Drying: Building the Design Space.

PubMed

Arsiccio, Andrea; Pisano, Roberto

2018-06-01

The present work shows a rational method for the development of the freezing step of a freeze-drying cycle. The current approach to the selection of freezing conditions is still empirical and nonsystematic, thus resulting in poor robustness of control strategy. The final aim of this work is to fill this gap, describing a rational procedure, based on mathematical modeling, for properly choosing the freezing conditions. Mechanistic models are used for the prediction of temperature profiles during freezing and dimension of ice crystals being formed. Mathematical description of the drying phase of freeze-drying is also coupled with the results obtained by freezing models, thus providing a comprehensive characterization of the lyophilization process. In this framework, deep understanding of the phenomena involved is required, and according to the Quality by Design approach, this knowledge can be used to build the design space. The step-by-step procedure for building the design space for freezing is thus described, and examples of applications are provided. The calculated design space is validated upon experimental data, and we show that it allows easy control of the freezing process and fast selection of appropriate operating conditions. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

SARTools: A DESeq2- and EdgeR-Based R Pipeline for Comprehensive Differential Analysis of RNA-Seq Data.

PubMed

Varet, Hugo; Brillet-Guéguen, Loraine; Coppée, Jean-Yves; Dillies, Marie-Agnès

2016-01-01

Several R packages exist for the detection of differentially expressed genes from RNA-Seq data. The analysis process includes three main steps, namely normalization, dispersion estimation and test for differential expression. Quality control steps along this process are recommended but not mandatory, and failing to check the characteristics of the dataset may lead to spurious results. In addition, normalization methods and statistical models are not exchangeable across the packages without adequate transformations the users are often not aware of. Thus, dedicated analysis pipelines are needed to include systematic quality control steps and prevent errors from misusing the proposed methods. SARTools is an R pipeline for differential analysis of RNA-Seq count data. It can handle designs involving two or more conditions of a single biological factor with or without a blocking factor (such as a batch effect or a sample pairing). It is based on DESeq2 and edgeR and is composed of an R package and two R script templates (for DESeq2 and edgeR respectively). Tuning a small number of parameters and executing one of the R scripts, users have access to the full results of the analysis, including lists of differentially expressed genes and a HTML report that (i) displays diagnostic plots for quality control and model hypotheses checking and (ii) keeps track of the whole analysis process, parameter values and versions of the R packages used. SARTools provides systematic quality controls of the dataset as well as diagnostic plots that help to tune the model parameters. It gives access to the main parameters of DESeq2 and edgeR and prevents untrained users from misusing some functionalities of both packages. By keeping track of all the parameters of the analysis process it fits the requirements of reproducible research.

Fidelity considerations in translational research: Eating As Treatment - a stepped wedge, randomised controlled trial of a dietitian delivered behaviour change counselling intervention for head and neck cancer patients undergoing radiotherapy.

PubMed

Beck, Alison Kate; Baker, Amanda; Britton, Ben; Wratten, Chris; Bauer, Judith; Wolfenden, Luke; Carter, Gregory

2015-10-15

The confidence with which researchers can comment on intervention efficacy relies on evaluation and consideration of intervention fidelity. Accordingly, there have been calls to increase the transparency with which fidelity methodology is reported. Despite this, consideration and/or reporting of fidelity methods remains poor. We seek to address this gap by describing the methodology for promoting and facilitating the evaluation of intervention fidelity in The EAT (Eating As Treatment) project: a multi-site stepped wedge randomised controlled trial of a dietitian delivered behaviour change counselling intervention to improve nutrition (primary outcome) in head and neck cancer patients undergoing radiotherapy. In accordance with recommendations from the National Institutes of Health Behaviour Change Consortium Treatment Fidelity Workgroup, we sought to maximise fidelity in this stepped wedge randomised controlled trial via strategies implemented from study design through to provider training, intervention delivery and receipt. As the EAT intervention is designed to be incorporated into standard dietetic consultations, we also address unique challenges for translational research. We offer a strong model for improving the quality of translational findings via real world application of National Institutes of Health Behaviour Change Consortium recommendations. Greater transparency in the reporting of behaviour change research is an important step in improving the progress and quality of behaviour change research. ACTRN12613000320752 (Date of registration 21 March 2013).

Motivational interviewing increases physical activity and self-efficacy in people living in the community after hip fracture: a randomized controlled trial.

PubMed

O'Halloran, Paul D; Shields, Nora; Blackstock, Felicity; Wintle, Elizabeth; Taylor, Nicholas F

2016-11-01

To investigate if motivational interviewing improved physical activity, self-efficacy, quality of life, mobility and mental health in people living in the community after hip fracture. Single-blind randomized controlled trial. Community. A total of 30 adults after hip fracture who had been discharged from rehabilitation to independent living in the community and allocated to a control group ( n = 14) or an intervention group ( n = 16). All participants received usual care. The intervention group also received eight weekly sessions of motivational interviewing as additional input, with the control group having no additional matching input. The primary outcome was physical activity levels as measured by an accelerometer (steps taken per day, time spent walking per day, and time spent sitting or lying each day). Secondary outcomes included self-efficacy (confidence about walking and not falling), health-related quality of life, mobility and mental health. Relative to usual care, the motivational interviewing group took significantly more steps per day (mean = 1237 steps, 95% confidence interval (CI) 12 to 2463), walked for longer per day (mean = 14.4 minutes, 95% CI 0.6 to 28.8), had improved self-efficacy evidenced by being more confident about walking (mean = 1.6 units out of 10, 95% CI 0.3 to 2.9) and not falling (mean = 1.1 units out of 10, 95% CI 0.3 to 1.9) and improved health-related quality of life and mental health. This study provides preliminary evidence that motivational interviewing can result in clinically meaningful improvements in physical activity and psychosocial outcomes for people recovering from hip fracture.

Quality Control of Structural MRI Images Applied Using FreeSurfer—A Hands-On Workflow to Rate Motion Artifacts

PubMed Central

Backhausen, Lea L.; Herting, Megan M.; Buse, Judith; Roessner, Veit; Smolka, Michael N.; Vetter, Nora C.

2016-01-01

In structural magnetic resonance imaging motion artifacts are common, especially when not scanning healthy young adults. It has been shown that motion affects the analysis with automated image-processing techniques (e.g., FreeSurfer). This can bias results. Several developmental and adult studies have found reduced volume and thickness of gray matter due to motion artifacts. Thus, quality control is necessary in order to ensure an acceptable level of quality and to define exclusion criteria of images (i.e., determine participants with most severe artifacts). However, information about the quality control workflow and image exclusion procedure is largely lacking in the current literature and the existing rating systems differ. Here, we propose a stringent workflow of quality control steps during and after acquisition of T1-weighted images, which enables researchers dealing with populations that are typically affected by motion artifacts to enhance data quality and maximize sample sizes. As an underlying aim we established a thorough quality control rating system for T1-weighted images and applied it to the analysis of developmental clinical data using the automated processing pipeline FreeSurfer. This hands-on workflow and quality control rating system will aid researchers in minimizing motion artifacts in the final data set, and therefore enhance the quality of structural magnetic resonance imaging studies. PMID:27999528

Development of Process Analytical Technology (PAT) methods for controlled release pellet coating.

PubMed

Avalle, P; Pollitt, M J; Bradley, K; Cooper, B; Pearce, G; Djemai, A; Fitzpatrick, S

2014-07-01

This work focused on the control of the manufacturing process for a controlled release (CR) pellet product, within a Quality by Design (QbD) framework. The manufacturing process was Wurster coating: firstly layering active pharmaceutical ingredient (API) onto sugar pellet cores and secondly a controlled release (CR) coating. For each of these two steps, development of a Process Analytical Technology (PAT) method is discussed and also a novel application of automated microscopy as the reference method. Ultimately, PAT methods should link to product performance and the two key Critical Quality Attributes (CQAs) for this CR product are assay and release rate, linked to the API and CR coating steps respectively. In this work, the link between near infra-red (NIR) spectra and those attributes was explored by chemometrics over the course of the coating process in a pilot scale industrial environment. Correlations were built between the NIR spectra and coating weight (for API amount), CR coating thickness and dissolution performance. These correlations allow the coating process to be monitored at-line and so better control of the product performance in line with QbD requirements. Copyright © 2014 Elsevier B.V. All rights reserved.

Zinc thermal spray coatings for reinforced concrete: An AWS process standard

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sulit, R.A.

Zinc and aluminum thermal spray coatings (TSC) have been used for lining concrete weir in Great Britain since the 1950`s to maintain the dimensions of the weir for flow control concomitant with reduced wear and erosion of the concrete surfaces. This paper reports the development and the content of the ANSI/AWS C2.20-XX standard for the application of An TSC on concrete using flame and arc spray processes. This standard is formatted as an industrial process instruction: job description; safety; feedstock materials; equipment; a step-by-step method for surface preparation, thermal spraying; quality control; repair and maintenance of surface preparation, thermal spraying;more » quality control; repair and maintenance of Zn TSC on concrete; and a Job Control Record. Job planning and training and certification requirements are presented for An TSC inspectors and thermal spray operators. Four annexes are included in the standard: (a) historical summary of Zn TSC on concrete (b) sample job control record; (c) thermal spray operator qualification; and (d) portable adhesion testing for An TSC on concrete. This standard is based on the current literature and industrial equipment, process, and practices.« less

A verification procedure for MSC/NASTRAN Finite Element Models

NASA Technical Reports Server (NTRS)

Stockwell, Alan E.

1995-01-01

Finite Element Models (FEM's) are used in the design and analysis of aircraft to mathematically describe the airframe structure for such diverse tasks as flutter analysis and actively controlled landing gear design. FEM's are used to model the entire airplane as well as airframe components. The purpose of this document is to describe recommended methods for verifying the quality of the FEM's and to specify a step-by-step procedure for implementing the methods.

TU-FG-201-12: Designing a Risk-Based Quality Assurance Program for a Newly Implemented Y-90 Microspheres Procedure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vile, D; Zhang, L; Cuttino, L

2016-06-15

Purpose: To create a quality assurance program based upon a risk-based assessment of a newly implemented SirSpheres Y-90 procedure. Methods: A process map was created for a newly implemented SirSpheres procedure at a community hospital. The process map documented each step of this collaborative procedure, as well as the roles and responsibilities of each member. From the process map, different potential failure modes were determined as well as any current controls in place. From this list, a full failure mode and effects analysis (FMEA) was performed by grading each failure mode’s likelihood of occurrence, likelihood of detection, and potential severity.more » These numbers were then multiplied to compute the risk priority number (RPN) for each potential failure mode. Failure modes were then ranked based on their RPN. Additional controls were then added, with failure modes corresponding to the highest RPNs taking priority. Results: A process map was created that succinctly outlined each step in the SirSpheres procedure in its current implementation. From this, 72 potential failure modes were identified and ranked according to their associated RPN. Quality assurance controls and safety barriers were then added for failure modes associated with the highest risk being addressed first. Conclusion: A quality assurance program was created from a risk-based assessment of the SirSpheres process. Process mapping and FMEA were effective in identifying potential high-risk failure modes for this new procedure, which were prioritized for new quality assurance controls. TG 100 recommends the fault tree analysis methodology to design a comprehensive and effective QC/QM program, yet we found that by simply introducing additional safety barriers to address high RPN failure modes makes the whole process simpler and safer.« less

Trunk Exercises Improve Gait Symmetry in Parkinson Disease: A Blind Phase II Randomized Controlled Trial.

PubMed

Hubble, Ryan P; Naughton, Geraldine; Silburn, Peter A; Cole, Michael H

2018-03-01

Deficits in step-to-step symmetry and trunk muscle activations have been linked to falls in Parkinson disease. Given such symptoms are poorly managed with anti-parkinsonian medications, alternate therapies are needed. This blind phase II randomized controlled trial sought to establish whether exercise can improve step-to-step symmetry in Parkinson disease. Twenty-four Parkinson disease patients with a falls history completed baseline assessments of symptom severity, balance confidence, mobility, and quality of life. Step-to-step symmetry was assessed by deriving harmonic ratios from three-dimensional accelerations collected for the head and trunk. Patients were randomly assigned to either 12 wks of exercise and falls prevention education or falls prevention education only. Both groups repeated the baseline tests 12 and 24 wks after the initial assessment. The Australian and New Zealand Clinical Trials Registry number is ACTRN12613001175763. At 12 wks, the exercise group had statistically significant and clinically relevant improvements in anterior-posterior step-to-step trunk symmetry. In contrast, the education group recorded statistically significant and clinically meaningful reductions in medial-lateral and vertical step-to-step trunk symmetry at 12 wks. Given that step-to-step symmetry improved for the exercise group and declined for the education group after intervention, active interventions seem more suited to increasing independence and quality of life for people with Parkinson disease. Complete the self-assessment activity and evaluation online at http://www.physiatry.org/JournalCME CME OBJECTIVES: Upon completion of this article, the reader should be able to do the following: (1) Describe the effect deficits in trunk muscle function have on gait in individuals with Parkinson disease; (2) Identify the benefits of targeted trunk exercises on step-to-step symmetry; and (3) Discuss the benefits of improving step-to-step symmetry in individuals with Parkinson disease. Advanced ACCREDITATION: The Association of Academic Physiatrists is accredited by the Accreditation Council for Continuing Medical Education to provide continuing medical education for physicians.The Association of Academic Physiatrists designates this Journal-based CME activity for a maximum of 0.5 AMA PRA Category 1 Credit(s)™. Physicians should only claim credit commensurate with the extent of their participation in the activity.

An Internet-Mediated Pedometer-Based Program Improves Health-Related Quality-of-Life Domains and Daily Step Counts in COPD

PubMed Central

Moy, Marilyn L.; Collins, Riley J.; Martinez, Carlos H.; Kadri, Reema; Roman, Pia; Holleman, Robert G.; Kim, Hyungjin Myra; Nguyen, Huong Q.; Cohen, Miriam D.; Goodrich, David E.; Giardino, Nicholas D.

2015-01-01

BACKGROUND: Low levels of physical activity (PA) are associated with poor outcomes in people with COPD. Interventions to increase PA could improve outcomes. METHODS: We tested the efficacy of a novel Internet-mediated, pedometer-based exercise intervention. Veterans with COPD (N = 239) were randomized in a 2:1 ratio to the (1) intervention group (Omron HJ-720 ITC pedometer and Internet-mediated program) or (2) wait-list control group (pedometer). The primary outcome was health-related quality of life (HRQL), assessed by the St. George’s Respiratory Questionnaire (SGRQ), at 4 months. We examined the SGRQ total score (SGRQ-TS) and three domain scores: Symptoms, Activities, and Impact. The secondary outcome was daily step counts. Linear regression models assessed the effect of intervention on outcomes. RESULTS: Participants had a mean age of 67 ± 9 years, and 94% were men. There was no significant between-group difference in mean 4-month SGRQ-TS (2.3 units, P = .14). Nevertheless, a significantly greater proportion of intervention participants than control subjects had at least a 4-unit improvement in SGRQ-TS, the minimum clinically important difference (53% vs 39%, respectively, P = .05). For domain scores, the intervention group had a lower (reflecting better HRQL) mean than the control group by 4.6 units for Symptoms (P = .046) and by 3.3 units for Impact (P = .049). There was no significant difference in Activities score between the two groups. Compared with the control subjects, intervention participants walked 779 more steps per day at 4 months (P = .005). CONCLUSIONS: An Internet-mediated, pedometer-based walking program can improve domains of HRQL and daily step counts at 4 months in people with COPD. TRIAL REGISTRY: Clinical Trials.gov; No.: NCT01102777; URL: www.clinicaltrials.gov PMID:25811395

Controllability of Complex Dynamic Objects

NASA Astrophysics Data System (ADS)

Kalach, G. G.; Kazachek, N. A.; Morozov, A. A.

2017-01-01

Quality requirements for mobile robots intended for both specialized and everyday use are increasing in step with the complexity of the technological tasks assigned to the robots. Whether a mobile robot is for ground, aerial, or underwater use, the relevant quality characteristics can be summarized under the common concept of agility. This term denotes the object’s (the robot)’s ability to react quickly to control actions (change speed and direction), turn in a limited area, etc. When using this approach in integrated assessment of the quality characteristics of an object with the control system, it seems more constructive to use the term “degree of control”. This paper assesses the degree of control by an example of a mobile robot with the variable-geometry drive wheel axle. We show changes in the degree of control depending on the robot’s configuration, and results illustrated by calculation data, computer and practical experiments. We describe the prospects of using intelligent technology for efficient control of objects with a high degree of controllability.

SMART MOVE - a smartphone-based intervention to promote physical activity in primary care: study protocol for a randomized controlled trial

PubMed Central

2013-01-01

Background Sedentary lifestyles are now becoming a major concern for governments of developed and developing countries with physical inactivity related to increased all-cause mortality, lower quality of life, and increased risk of obesity, diabetes, hypertension and many other chronic diseases. The powerful onboard computing capacity of smartphones, along with the unique relationship individuals have with their mobile phones, suggests that mobile devices have the potential to influence behavior. However, no previous trials have been conducted using smartphone technology to promote physical activity. This project has the potential to provide robust evidence in this area of innovation. The aim of this study is to evaluate the effectiveness of a smartphone application as an intervention to promote physical activity in primary care. Methods/design A two-group, parallel randomized controlled trial (RCT) with a main outcome measure of mean difference in daily step count between baseline and follow up over eight weeks. A minimum of 80 active android smartphone users over 16 years of age who are able to undertake moderate physical activity are randomly assigned to the intervention group (n = 40) or to a control group (n = 40) for an eight week period. After randomization, all participants will complete a baseline period of one week during which a baseline mean daily step count will be established. The intervention group will be instructed in the usability features of the smartphone application, will be encouraged to try to achieve 10,000 steps per day as an exercise goal and will be given an exercise promotion leaflet. The control group will be encouraged to try to walk an additional 30 minutes per day along with their normal activity (the equivalent of 10,000 steps) as an exercise goal and will be given an exercise promotion leaflet. The primary outcome is mean difference in daily step count between baseline and follow-up. Secondary outcomes are systolic and diastolic blood pressure, resting heart rate, mental health score using HADS and quality of life score using Euroqol. Randomization and allocation to the intervention and groups will be carried out by an independent researcher, ensuring the allocation sequence is concealed from the study researchers until the interventions are assigned. The primary analysis is based on mean daily step count, comparing the mean difference in daily step count between the baseline and the trial periods in the intervention and control groups at follow up. Trial registration Current Controlled Trials ISRCTN99944116 PMID:23714362

Application of the quality by design approach to the drug substance manufacturing process of an Fc fusion protein: towards a global multi-step design space.

PubMed

Eon-duval, Alex; Valax, Pascal; Solacroup, Thomas; Broly, Hervé; Gleixner, Ralf; Strat, Claire L E; Sutter, James

2012-10-01

The article describes how Quality by Design principles can be applied to the drug substance manufacturing process of an Fc fusion protein. First, the quality attributes of the product were evaluated for their potential impact on safety and efficacy using risk management tools. Similarly, process parameters that have a potential impact on critical quality attributes (CQAs) were also identified through a risk assessment. Critical process parameters were then evaluated for their impact on CQAs, individually and in interaction with each other, using multivariate design of experiment techniques during the process characterisation phase. The global multi-step Design Space, defining operational limits for the entire drug substance manufacturing process so as to ensure that the drug substance quality targets are met, was devised using predictive statistical models developed during the characterisation study. The validity of the global multi-step Design Space was then confirmed by performing the entire process, from cell bank thawing to final drug substance, at its limits during the robustness study: the quality of the final drug substance produced under different conditions was verified against predefined targets. An adaptive strategy was devised whereby the Design Space can be adjusted to the quality of the input material to ensure reliable drug substance quality. Finally, all the data obtained during the process described above, together with data generated during additional validation studies as well as manufacturing data, were used to define the control strategy for the drug substance manufacturing process using a risk assessment methodology. Copyright © 2012 Wiley-Liss, Inc.

Quality Assurance and Control Considerations in Environmental Measurements and Monitoring

NASA Astrophysics Data System (ADS)

Sedlet, Jacob

1982-06-01

Quality assurance and quality control have become accepted as essential parts of all environmental surveillance, measurements, and monitoring programs, both nuclear and non-nuclear. The same principles and details apply to each. It is primarily the final measurement technique that differs. As the desire and need to measure smaller amounts of pollutants with greater accuracy has increased, it has been recognized that quality assurance and control programs are cost-effective in achieving the expected results. Quality assurance (QA) consists of all the actions necessary to provide confidence in the results. Quality control (QC) is a part of QA, and consists of those actions and activities that permit the control of the individual steps in the environmental program. The distinction between the two terms is not always clearly defined, but a sharp division is not necessary. The essential principle of QA and QC is a commitment to high quality results. The essential components of a QA and QC program are a complete, written procedures manual for all parts of the environmental program, the use of standard or validated procedures, participation in applicable interlaboratory comparison or QA programs, replicate analysis and measurement, training of personnel, and a means of auditing or checking that the QA and QC programs are properly conducted. These components are discussed below in some detail.

An integrated bioinformatics approach to improve two-color microarray quality-control: impact on biological conclusions.

PubMed

van Haaften, Rachel I M; Luceri, Cristina; van Erk, Arie; Evelo, Chris T A

2009-06-01

Omics technology used for large-scale measurements of gene expression is rapidly evolving. This work pointed out the need of an extensive bioinformatics analyses for array quality assessment before and after gene expression clustering and pathway analysis. A study focused on the effect of red wine polyphenols on rat colon mucosa was used to test the impact of quality control and normalisation steps on the biological conclusions. The integration of data visualization, pathway analysis and clustering revealed an artifact problem that was solved with an adapted normalisation. We propose a possible point to point standard analysis procedure, based on a combination of clustering and data visualization for the analysis of microarray data.

The Stanford Automated Mounter: Enabling High-Throughput Protein Crystal Screening at SSRL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, C.A.; Cohen, A.E.

2009-05-26

The macromolecular crystallography experiment lends itself perfectly to high-throughput technologies. The initial steps including the expression, purification, and crystallization of protein crystals, along with some of the later steps involving data processing and structure determination have all been automated to the point where some of the last remaining bottlenecks in the process have been crystal mounting, crystal screening, and data collection. At the Stanford Synchrotron Radiation Laboratory, a National User Facility that provides extremely brilliant X-ray photon beams for use in materials science, environmental science, and structural biology research, the incorporation of advanced robotics has enabled crystals to be screenedmore » in a true high-throughput fashion, thus dramatically accelerating the final steps. Up to 288 frozen crystals can be mounted by the beamline robot (the Stanford Auto-Mounting System) and screened for diffraction quality in a matter of hours without intervention. The best quality crystals can then be remounted for the collection of complete X-ray diffraction data sets. Furthermore, the entire screening and data collection experiment can be controlled from the experimenter's home laboratory by means of advanced software tools that enable network-based control of the highly automated beamlines.« less

PI and repetitive control for single phase inverter based on virtual rotating coordinate system

NASA Astrophysics Data System (ADS)

Li, Mengqi; Tong, Yibin; Jiang, Jiuchun; Liang, Jiangang

2018-03-01

Microgrid technology developed rapidly and nonlinear loads were connected increasingly. A new control strategy was proposed for single phase inverter when connected nonlinear loads under island condition. PI and repetitive compound controller was realized under synchronous rotating coordinate system and acquired high quality sinusoidal voltage output without voltage spike when loads step changed. Validity and correctness were verified by simulation using MATLAB/Simulink.

Evaluation of quality of commercial pedometers.

PubMed

Tudor-Locke, Catrine; Sisson, Susan B; Lee, Sarah M; Craig, Cora L; Plotnikoff, Ronald C; Bauman, Adrian

2006-01-01

The purpose of this study was to: 1) evaluate the quality of promotional pedometers widely distributed through cereal boxes at the time of the 2004 Canada on the Move campaign; and 2) establish a battery of testing protocols to provide direction for future consensus on industry standards for pedometer quality. Fifteen Kellogg's* Special K* Step Counters (K pedometers or K; manufactured for Kellogg Canada by Sasco, Inc.) and 9 Yamax pedometers (Yamax; Yamax Corporation, Tokyo, Japan) were tested with 9 participants accordingly: 1) 20 Step Test; 2) treadmill at 80m x min(-1) (3 miles x hr(-1)) and motor vehicle controlled conditions; and 3) 24-hour free-living conditions against an accelerometer criterion. Fifty-three percent of the K pedometers passed the 20 Step Test compared to 100% of the Yamax. Mean absolute percent error for the K during treadmill walking was 24.2+/-33.9 vs. 3.9+/-6.6% for the Yamax. The K detected 5.7-fold more non-steps compared to the Yamax during the motor vehicle condition. In the free-living condition, mean absolute percent error relative to the ActiGraph was 44.9+/-34.5% for the K vs. 19.5+/-21.2% for the Yamax. K pedometers are unacceptably inaccurate. We suggest that research grade pedometers: 1) be manufactured to a sensitivity threshold of 0.35 Gs; 2) detect +/-1 step error on the 20 Step Test (i.e., within 5%); 3) detect +/-1% error most of the time during treadmill walking at 80m x min(-1) (3 miles x hr(-1)); as well as, 4) detect steps/day within 10% of the ActiGraph at least 60% of the time, or be within 10% of the Yamax under free-living conditions.

The effects of Internet-based exercise compared with supervised group exercise in people with type 2 diabetes: a randomized controlled study.

PubMed

Akinci, Buket; Yeldan, Ipek; Satman, Ilhan; Dirican, Ahmet; Ozdincler, Arzu Razak

2018-06-01

To compare the effects of Internet-based exercise on glycaemic control, blood lipids, body composition, physical activity level, functional capacity, and quality of life with supervised group exercise in patients with type 2 diabetes. Single-blind, randomized controlled study. A Faculty of Health Sciences. A total of 65 patients with type 2 diabetes (47 women, 18 men). Group A ( n = 22), control group - physical activity counselling once with a brochure. Group B ( n = 22), supervised group-based exercise, three days per week for eight weeks. Group C ( n = 21), Internet-based exercise following the same programme via a website. Primary outcomes - glycosylated haemoglobin, fasting blood glucose, high-density and low-density lipoprotein, triglyceride, and cholesterol. Secondary outcomes - waist and hip circumferences, body mass index, number of steps, six-minute walking test, and Euro-Quality of Life-5 Dimension. After treatment, glycaemic control (mean change for Group B; Group C; -0.80%, -0.91%, P = 0.003), waist circumference (-4.23 cm, 5.64 cm, P = 0.006), and quality of life (0.26, 0.15, P = 0.013) significantly improved in both training groups compared with the control group. Fasting blood glucose (-46.86 mg/dL, P = 0.009) and hip circumference (-2.7 cm, P = 0.011) were significantly decreased in Group B and total cholesterol (-16.4 mg/dL, P = 0.028), six-minute walking distance (30.5 m, P = 0.01), and number of steps (1258.05, P = 0.023) significantly improved in Group C compared with control group. Group B and Group C changed with equal magnitude. In type 2 diabetes, supervised group-based and Internet-based exercise can improve equally glycaemic control, waist circumference, and quality of life, and both are better than simply counselling.

[Discussion on research thinking of traditional Chinese medicine standardization system based on whole process quality control].

PubMed

Dong, Ling; Sun, Yu; Pei, Wen-Xuan; Dai, Jun-Dong; Wang, Zi-Yu; Pan, Meng; Chen, Jiang-Peng; Wang, Yun

2017-12-01

The concept of "Quality by design" indicates that good design for the whole life cycle of pharmaceutical production enables the drug to meet the expected quality requirements. Aiming at the existing problems of the traditional Chinese medicine (TCM) industry, the TCM standardization system was put forward in this paper from the national strategic level, under the guidance by the idea of quality control in international manufacturing industry and with considerations of TCM industry's own characteristics and development status. The connotation of this strategy was to establish five interrelated systems: multi-indicators system based on tri-indicators system, quality standard and specification system of TCM herbal materials and decoction pieces, quality traceability system, data monitoring system based on whole-process quality control, and whole-process quality management system of TCM, and achieve the whole process systematic and scientific study in TCM industry through "top-level design-implement in steps-system integration" workflow. This article analyzed the correlation between the quality standards of all links, established standard operating procedures of each link and whole process, and constructed a high standard overall quality management system for TCM industry chains, in order to provide a demonstration for the establishment of TCM whole-process quality control system and provide systematic reference and basis for standardization strategy in TCM industry. Copyright© by the Chinese Pharmaceutical Association.

Short- and long-term effects of a physical activity counselling programme in COPD: a randomized controlled trial.

PubMed

Altenburg, Wytske A; ten Hacken, Nick H T; Bossenbroek, Linda; Kerstjens, Huib A M; de Greef, Mathieu H G; Wempe, Johan B

2015-01-01

We were interested in the effects of a physical activity (PA) counselling programme in three groups of COPD patients from general practice (primary care), outpatient clinic (secondary care) and pulmonary rehabilitation (PR). In this randomized controlled trial 155 COPD patients, 102 males, median (IQR) age 62 (54-69) y, FEV1predicted 60 (40-75) % were assigned to a 12-weeks' physical activity counselling programme or usual care. Physical activity (pedometer (Yamax SW200) and metabolic equivalents), exercise capacity (6-min walking distance) and quality of life (Chronic Respiratory Questionnaire and Clinical COPD Questionnaire) were assessed at baseline, after three and 15 months. A significant difference between the counselling and usual care group in daily steps (803 steps, p = 0.001) and daily physical activity (2214 steps + equivalents, p = 0.001)) from 0 to 3 months was found in the total group, as well as in the outpatient (1816 steps, 2616 steps + equivalents, both p = 0.007) and PR (758 steps, 2151 steps + equivalents, both p = 0.03) subgroups. From 0 to 15 months no differences were found in physical activity. However, when patients with baseline physical activity>10,000 steps per day (n = 8), who are already sufficiently active, were excluded, a significant long-term effect of the counselling programme on daily physical activity existed in the total group (p = 0.02). Differences in exercise capacity and quality of life were found only from 0 to 3 months, in the outpatient subgroup. Our PA counselling programme effectively enhances PA level in COPD patients after three months. Sedentary patients at baseline still benefit after 15 months. ClinicalTrials.gov: registration number NCT00614796. Copyright © 2014. Published by Elsevier Ltd.

Effectiveness of en masse versus two-step retraction: a systematic review and meta-analysis.

PubMed

Rizk, Mumen Z; Mohammed, Hisham; Ismael, Omar; Bearn, David R

2018-01-05

This review aims to compare the effectiveness of en masse and two-step retraction methods during orthodontic space closure regarding anchorage preservation and anterior segment retraction and to assess their effect on the duration of treatment and root resorption. An electronic search for potentially eligible randomized controlled trials and prospective controlled trials was performed in five electronic databases up to July 2017. The process of study selection, data extraction, and quality assessment was performed by two reviewers independently. A narrative review is presented in addition to a quantitative synthesis of the pooled results where possible. The Cochrane risk of bias tool and the Newcastle-Ottawa Scale were used for the methodological quality assessment of the included studies. Eight studies were included in the qualitative synthesis in this review. Four studies were included in the quantitative synthesis. En masse/miniscrew combination showed a statistically significant standard mean difference regarding anchorage preservation - 2.55 mm (95% CI - 2.99 to - 2.11) and the amount of upper incisor retraction - 0.38 mm (95% CI - 0.70 to - 0.06) when compared to a two-step/conventional anchorage combination. Qualitative synthesis suggested that en masse retraction requires less time than two-step retraction with no difference in the amount of root resorption. Both en masse and two-step retraction methods are effective during the space closure phase. The en masse/miniscrew combination is superior to the two-step/conventional anchorage combination with regard to anchorage preservation and amount of retraction. Limited evidence suggests that anchorage reinforcement with a headgear produces similar results with both retraction methods. Limited evidence also suggests that en masse retraction may require less time and that no significant differences exist in the amount of root resorption between the two methods.

A mixed-method evaluation of a workforce development intervention for nursing assistants in nursing homes: the case of WIN A STEP UP.

PubMed

Morgan, Jennifer Craft; Konrad, Thomas R

2008-07-01

The purpose of this study was to evaluate WIN A STEP UP, a workforce development program for nursing assistants (NAs) in nursing homes (NHs) involving continuing education by onsite trainers, compensation for education modules, supervisory skills training of frontline supervisors, and short-term retention contracts for bonuses and/or wage increases upon completion. We collected longitudinal semistructured interview and survey data from NAs, supervisors, and managers at 8 program NHs and 10 comparison NHs. To control for selection bias, we matched 77 NA program participants to 81 participating site and 135 comparison site controls using propensity scores in a quasi-experimental design supplemented by qualitative assessments. Managers at seven of eight participating NHs wanted to repeat the program. At 3 months after baseline, participants differed from controls by having (a) more improved nursing care and supportive leadership scores, (b) greater improvement in team care, and (c) stronger ratings of career and financial rewards. Nurse supervisors participating in supervisory skills training reported positive changes in management practices for themselves and peers. Modest 3-month turnover reductions occurred in six settings where the program was fully implemented without incident. Managers', supervisors', and participating NAs' consistent perceptions of improved quality of care and job quality, along with a promise of increased retention, suggest that interventions like WIN A STEP UP are beneficial.

An evaluation of the strategic approach to the rehabilitation of traumatic brain injury (TBI) patients

PubMed Central

Tomaszewski, Wiesław; Mańko, Grzegorz

2011-01-01

Summary Background The objective of our study was to evaluate a goal-driven strategic plan for the step-by-step rehabilitation of traumatic brain injury (TBI) patients, with effectiveness measured in terms of quality of life, as compared to patients treated according to a standard, progressive rehabilitation program. Material/Methods We studied 40 patients after TBI awakened from a long-term coma. The patients were divided into two equal groups: a control group (n=20) involving patients treated before the introduction of the strategic approach, and an experimental group (n=20) involving patients rehabilitated under the strategic approach. In evaluating the effectiveness of rehabilitation we used a structured interview with clinical observation and a scale for assessing the quality of life of patients after TBI. Results The deterioration in the quality of life of TBI patients is mainly related to difficulties in satisfying physiological needs, self-care, reduced mobility and disorders of cognitive, regulatory, and social functions. In both groups, the feature most susceptible to rehabilitation related change was movement, while the least susceptible functions were associated with the use of different means of transport. This change is significantly greater in persons in the experimental group, as compared to controls. Conclusions We found that a rehabilitation program controlled by a strategic plan, with the cooperation of the patient, is more effective in improving the quality of life, as the patient is more self-motivated to individually designed objectives. PMID:21873948

The Effect of Core Stability Training on Functional Movement Patterns in Collegiate Athletes.

PubMed

Bagherian, Sajad; Ghasempoor, Khodayar; Rahnama, Nader; Wikstrom, Erik A

2018-02-06

Pre-participation examinations are the standard approach for assessing poor movement quality that would increase musculoskeletal injury risk. However, little is known about how core stability influences functional movement patterns. The primary purpose of this study was to determine the effect of an 8-week core stability program on functional movement patterns in collegiate athletes. The secondary purpose was to determine if the core stability training program would be more effective in those with worse movement quality (i.e. ≤14 baseline FMS score). Quasi-experimental design. Athletic Training Facility. One-hundred collegiate athletes. Functional movement patterns included the Functional Movement Screen (FMS), Lateral step down (LSD) and Y balance test (YBT) and were assessed before and after the 8-week program. Participants were placed into 1 of the 2 groups: intervention and control. The intervention group was required to complete a core stability training program that met 3 times per week for 8-week. Significant group x time interactions demonstrated improvements in FMS, LSD and YBT scores in the experimental group relative to the control group (p<0.001). Independent sample t-tests demonstrate that change scores were larger (greater improvement) for the FMS total score and Hurdle step (p<0.001) in athletes with worse movement quality. An 8-week core stability training program enhances functional movement patterns and dynamic postural control in collegiate athletes. The benefits are more pronounced in collegiate athletes with poor movement quality.

Estimation of water quality parameters of inland and coastal waters with the use of a toolkit for processing of remote sensing data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dekker, A.G.; Hoogenboom, H.J.; Rijkeboer, M.

1997-06-01

Deriving thematic maps of water quality parameters from a remote sensing image requires a number of processing steps, such as calibration, atmospheric correction, air/water interface correction, and application of water quality algorithms. A prototype software environment has recently been developed that enables the user to perform and control these processing steps. Main parts of this environment are: (i) access to the MODTRAN 3 radiative transfer code for removing atmospheric and air-water interface influences, (ii) a tool for analyzing of algorithms for estimating water quality and (iii) a spectral database, containing apparent and inherent optical properties and associated water quality parameters.more » The use of the software is illustrated by applying implemented algorithms for estimating chlorophyll to data from a spectral library of Dutch inland waters with CHL ranging from 1 to 500 pg 1{sup -1}. The algorithms currently implemented in the Toolkit software are recommended for optically simple waters, but for optically complex waters development of more advanced retrieval methods is required.« less

Generating Options for Active Risk Control (GO-ARC): introducing a novel technique.

PubMed

Card, Alan J; Ward, James R; Clarkson, P John

2014-01-01

After investing significant amounts of time and money in conducting formal risk assessments, such as root cause analysis (RCA) or failure mode and effects analysis (FMEA), healthcare workers are left to their own devices in generating high-quality risk control options. They often experience difficulty in doing so, and tend toward an overreliance on administrative controls (the weakest category in the hierarchy of risk controls). This has important implications for patient safety and the cost effectiveness of risk management operations. This paper describes a before and after pilot study of the Generating Options for Active Risk Control (GO-ARC) technique, a novel tool to improve the quality of the risk control options generation process. The quantity, quality (using the three-tiered hierarchy of risk controls), variety, and novelty of risk controls generated. Use of the GO-ARC technique was associated with improvement on all measures. While this pilot study has some notable limitations, it appears that the GO-ARC technique improved the risk control options generation process. Further research is needed to confirm this finding. It is also important to note that improved risk control options are a necessary, but not sufficient, step toward the implementation of more robust risk controls. © 2013 National Association for Healthcare Quality.

Technology to improve quality and accountability.

PubMed

Kay, Jonathan

2006-01-01

A body of evidence has been accumulated to demonstrate that current practice is not sufficiently safe for several stages of central laboratory testing. In particular, while analytical and perianalytical steps that take place within the laboratory are subjected to quality control procedures, this is not the case for several pre- and post-analytical steps. The ubiquitous application of auto-identification technology seems to represent a valuable tool for reducing error rates. A series of projects in Oxford has attempted to improve processes which support several areas of laboratory medicine, including point-of-care testing, blood transfusion, delivery and interpretation of reports, and support of decision-making by clinicians. The key tools are auto-identification, Internet communication technology, process re-engineering, and knowledge management.

Mass imbalances in EPANET water-quality simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, Michael J.; Janke, Robert; Taxon, Thomas N.

EPANET is widely employed to simulate water quality in water distribution systems. However, the time-driven simulation approach used to determine concentrations of water-quality constituents provides accurate results, in general, only for small water-quality time steps; use of an adequately short time step may not be feasible. Overly long time steps can yield errors in concentrations and result in situations in which constituent mass is not conserved. Mass may not be conserved even when EPANET gives no errors or warnings. This paper explains how such imbalances can occur and provides examples of such cases; it also presents a preliminary event-driven approachmore » that conserves mass with a water-quality time step that is as long as the hydraulic time step. Results obtained using the current approach converge, or tend to converge, to those obtained using the new approach as the water-quality time step decreases. Improving the water-quality routing algorithm used in EPANET could eliminate mass imbalances and related errors in estimated concentrations.« less

Change in work day step counts, wellbeing and job performance in Catalan university employees: a randomised controlled trial.

PubMed

Puig-Ribera, Anna; McKenna, Jim; Gilson, Nicholas; Brown, Wendy J

2008-12-01

Using a randomised controlled trial design, this feasibility study assessed the impact of two walking interventions on quality of life (QoL) and job performance of Catalan university employees. A convenience sample of 70 employees completed baseline and intervention measures of step counts (Yamax SW 200 pedometer), wellbeing (SF-12 questionnaire) and work performance (Work Limitations Questionnaire) over 9 weeks. Before intervention, baseline step counts (five working days) were used to randomly allocate participants to a control (n = 26), "walking routes" (n = 19) and "walking while working" (n = 25) groups. Intervention effects were evaluated by calculating differences between pre-intervention and intervention data. One-way ANOVA was used to examine differences between groups. No significant group differences were found for changes in work-day step counts, QoL or work performance. When data from the two intervention groups were pooled (n = 44) there was a significant increase in step counts (+659 steps/day; n = 12; p < 0.01) among participants classified as ;Sedentary-Low active' (0-7499 steps/day) at baseline. In contrast there was a significant decrease (-637 steps/day; p < 0.05) in those initially categorised as ;Active' (> 10,000 steps/day; n = 21) and no change in those categorised as ;Moderately Active' (7500-9999, n = 11). The ;Sedentary-Low activity' group showed consistently greater improvements in QoL and work performance scores than the Moderate and Active groups. Initially low active participants showed the greatest increase in step counts and improved QoL and work productivity profiles. These data indicate the potential for improving QoL and job productivity through workplace walking in inactive Catalan employees.

Adapting water treatment design and operations to the impacts of global climate change

NASA Astrophysics Data System (ADS)

Clark, Robert M.; Li, Zhiwei; Buchberger, Steven G.

2011-12-01

It is anticipated that global climate change will adversely impact source water quality in many areas of the United States and will therefore, potentially, impact the design and operation of current and future water treatment systems. The USEPA has initiated an effort called the Water Resources Adaptation Program (WRAP) which is intended to develop tools and techniques that can assess the impact of global climate change on urban drinking water and wastewater infrastructure. A three step approach for assessing climate change impacts on water treatment operation and design is being persude in this effort. The first step is the stochastic characterization of source water quality, the second step is the application of the USEPA Water Treatment Plant model and the third step is the application of cost algorithms to provide a metric that can be used to assess the coat impact of climate change. A model has been validated using data collected from Cincinnati's Richard Miller Water Treatment Plant for the USEPA Information Collection Rule (ICR) database. An analysis of the water treatment processes in response to assumed perturbations in raw water quality identified TOC, pH, and bromide as the three most important parameters affecting performance of the Miller WTP. The Miller Plant was simulated using the EPA WTP model to examine the impact of these parameters on selected regulated water quality parameters. Uncertainty in influent water quality was analyzed to estimate the risk of violating drinking water maximum contaminant levels (MCLs).Water quality changes in the Ohio River were projected for 2050 using Monte Carlo simulation and the WTP model was used to evaluate the effects of water quality changes on design and operation. Results indicate that the existing Miller WTP might not meet Safe Drinking Water Act MCL requirements for certain extreme future conditions. However, it was found that the risk of MCL violations under future conditions could be controlled by enhancing existing WTP design and operation or by process retrofitting and modification.

A Model of Risk Analysis in Analytical Methodology for Biopharmaceutical Quality Control.

PubMed

Andrade, Cleyton Lage; Herrera, Miguel Angel De La O; Lemes, Elezer Monte Blanco

2018-01-01

One key quality control parameter for biopharmaceutical products is the analysis of residual cellular DNA. To determine small amounts of DNA (around 100 pg) that may be in a biologically derived drug substance, an analytical method should be sensitive, robust, reliable, and accurate. In principle, three techniques have the ability to measure residual cellular DNA: radioactive dot-blot, a type of hybridization; threshold analysis; and quantitative polymerase chain reaction. Quality risk management is a systematic process for evaluating, controlling, and reporting of risks that may affects method capabilities and supports a scientific and practical approach to decision making. This paper evaluates, by quality risk management, an alternative approach to assessing the performance risks associated with quality control methods used with biopharmaceuticals, using the tool hazard analysis and critical control points. This tool provides the possibility to find the steps in an analytical procedure with higher impact on method performance. By applying these principles to DNA analysis methods, we conclude that the radioactive dot-blot assay has the largest number of critical control points, followed by quantitative polymerase chain reaction, and threshold analysis. From the analysis of hazards (i.e., points of method failure) and the associated method procedure critical control points, we conclude that the analytical methodology with the lowest risk for performance failure for residual cellular DNA testing is quantitative polymerase chain reaction. LAY ABSTRACT: In order to mitigate the risk of adverse events by residual cellular DNA that is not completely cleared from downstream production processes, regulatory agencies have required the industry to guarantee a very low level of DNA in biologically derived pharmaceutical products. The technique historically used was radioactive blot hybridization. However, the technique is a challenging method to implement in a quality control laboratory: It is laborious, time consuming, semi-quantitative, and requires a radioisotope. Along with dot-blot hybridization, two alternatives techniques were evaluated: threshold analysis and quantitative polymerase chain reaction. Quality risk management tools were applied to compare the techniques, taking into account the uncertainties, the possibility of circumstances or future events, and their effects upon method performance. By illustrating the application of these tools with DNA methods, we provide an example of how they can be used to support a scientific and practical approach to decision making and can assess and manage method performance risk using such tools. This paper discusses, considering the principles of quality risk management, an additional approach to the development and selection of analytical quality control methods using the risk analysis tool hazard analysis and critical control points. This tool provides the possibility to find the method procedural steps with higher impact on method reliability (called critical control points). Our model concluded that the radioactive dot-blot assay has the larger number of critical control points, followed by quantitative polymerase chain reaction and threshold analysis. Quantitative polymerase chain reaction is shown to be the better alternative analytical methodology in residual cellular DNA analysis. © PDA, Inc. 2018.

The effect of impedance-controlled robotic gait training on walking ability and quality in individuals with chronic incomplete spinal cord injury: an explorative study.

PubMed

Fleerkotte, Bertine M; Koopman, Bram; Buurke, Jaap H; van Asseldonk, Edwin H F; van der Kooij, Herman; Rietman, Johan S

2014-03-04

There is increasing interest in the use of robotic gait-training devices in walking rehabilitation of incomplete spinal cord injured (iSCI) individuals. These devices provide promising opportunities to increase the intensity of training and reduce physical demands on therapists. Despite these potential benefits, robotic gait-training devices have not yet demonstrated clear advantages over conventional gait-training approaches, in terms of functional outcomes. This might be due to the reduced active participation and step-to-step variability in most robotic gait-training strategies, when compared to manually assisted therapy. Impedance-controlled devices can increase active participation and step-to-step variability. The aim of this study was to assess the effect of impedance-controlled robotic gait training on walking ability and quality in chronic iSCI individuals. A group of 10 individuals with chronic iSCI participated in an explorative clinical trial. Participants trained three times a week for eight weeks using an impedance-controlled robotic gait trainer (LOPES: LOwer extremity Powered ExoSkeleton). Primary outcomes were the 10-meter walking test (10 MWT), the Walking Index for Spinal Cord Injury (WISCI II), the six-meter walking test (6 MWT), the Timed Up and Go test (TUG) and the Lower Extremity Motor Scores (LEMS). Secondary outcomes were spatiotemporal and kinematics measures. All participants were tested before, during, and after training and at 8 weeks follow-up. Participants experienced significant improvements in walking speed (0.06 m/s, p = 0.008), distance (29 m, p = 0.005), TUG (3.4 s, p = 0.012), LEMS (3.4, p = 0.017) and WISCI after eight weeks of training with LOPES. At the eight-week follow-up, participants retained the improvements measured at the end of the training period. Significant improvements were also found in spatiotemporal measures and hip range of motion. Robotic gait training using an impedance-controlled robot is feasible in gait rehabilitation of chronic iSCI individuals. It leads to improvements in walking ability, muscle strength, and quality of walking. Improvements observed at the end of the training period persisted at the eight-week follow-up. Slower walkers benefit the most from the training protocol and achieve the greatest relative improvement in speed and walking distance.

The effect of impedance-controlled robotic gait training on walking ability and quality in individuals with chronic incomplete spinal cord injury: an explorative study

PubMed Central

2014-01-01

Background There is increasing interest in the use of robotic gait-training devices in walking rehabilitation of incomplete spinal cord injured (iSCI) individuals. These devices provide promising opportunities to increase the intensity of training and reduce physical demands on therapists. Despite these potential benefits, robotic gait-training devices have not yet demonstrated clear advantages over conventional gait-training approaches, in terms of functional outcomes. This might be due to the reduced active participation and step-to-step variability in most robotic gait-training strategies, when compared to manually assisted therapy. Impedance-controlled devices can increase active participation and step-to-step variability. The aim of this study was to assess the effect of impedance-controlled robotic gait training on walking ability and quality in chronic iSCI individuals. Methods A group of 10 individuals with chronic iSCI participated in an explorative clinical trial. Participants trained three times a week for eight weeks using an impedance-controlled robotic gait trainer (LOPES: LOwer extremity Powered ExoSkeleton). Primary outcomes were the 10-meter walking test (10MWT), the Walking Index for Spinal Cord Injury (WISCI II), the six-meter walking test (6MWT), the Timed Up and Go test (TUG) and the Lower Extremity Motor Scores (LEMS). Secondary outcomes were spatiotemporal and kinematics measures. All participants were tested before, during, and after training and at 8 weeks follow-up. Results Participants experienced significant improvements in walking speed (0.06 m/s, p = 0.008), distance (29 m, p = 0.005), TUG (3.4 s, p = 0.012), LEMS (3.4, p = 0.017) and WISCI after eight weeks of training with LOPES. At the eight-week follow-up, participants retained the improvements measured at the end of the training period. Significant improvements were also found in spatiotemporal measures and hip range of motion. Conclusion Robotic gait training using an impedance-controlled robot is feasible in gait rehabilitation of chronic iSCI individuals. It leads to improvements in walking ability, muscle strength, and quality of walking. Improvements observed at the end of the training period persisted at the eight-week follow-up. Slower walkers benefit the most from the training protocol and achieve the greatest relative improvement in speed and walking distance. PMID:24594284

Contribution au developpement d'une methode de controle des procedes dans une usine de bouletage

NASA Astrophysics Data System (ADS)

Gosselin, Claude

This thesis, a collaborative effort between Ecole de technologie superieure and ArcelorMittal Company, presents the development of a methodology for monitoring and quality control of multivariable industrial production processes. This innovation research mandate was developed at ArcelorMittal Exploitation Miniere (AMEM) pellet plant in Port-Cartier (Quebec, Canada). With this undertaking, ArcelorMittal is striving to maintain its world class level of excellence and continues to pursue initiatives that can augment its competitive advantage worldwide. The plant's gravimetric classification process was retained as a prototype and development laboratory due to its effect on the company's competitiveness and its impact on subsequent steps leading to final production of iron oxide pellets. Concretely, the development of this expertise in process control and in situ monitoring will establish a firm basic knowledge in the fields of complex system physical modeling, data reconciliation, statistical observers, multivariate command and quality control using real-time monitoring of the desirability function. The hydraulic classifier is mathematically modeled. Using planned disturbances on the production line, an identification procedure was established to provide empirical estimations of the model's structural parameters. A new sampling campaign and a previously unpublished data collection and consolidation policy were implemented plant-wide. Access to these invaluable data sources has enabled the establishment of new thresholds that govern the production process and its control. Finally, as a substitute for the traditional quality control process, we have implemented a new strategy based on the use of the desirability function. Our innovation is not in using this Finally, as a substitute for the traditional quality control process, we have implemented a new strategy based on the use of the desirability function. Our innovation is not in using this function as an indicator of overall (economic) satisfaction in the production process, but rather in proposing it as an "observer" of the system's state. The first implementation steps have already demonstrated the method's feasibility as well as other numerous industrial impacts on production processes within the company. Namely, the emergence of the economical aspect as a strategic variable that assures better governance of production processes where quality variables present strategic issues.

SMART MOVE - a smartphone-based intervention to promote physical activity in primary care: study protocol for a randomized controlled trial.

PubMed

Glynn, Liam G; Hayes, Patrick S; Casey, Monica; Glynn, Fergus; Alvarez-Iglesias, Alberto; Newell, John; Ólaighin, Gearóid; Heaney, David; Murphy, Andrew W

2013-05-29

Sedentary lifestyles are now becoming a major concern for governments of developed and developing countries with physical inactivity related to increased all-cause mortality, lower quality of life, and increased risk of obesity, diabetes, hypertension and many other chronic diseases. The powerful onboard computing capacity of smartphones, along with the unique relationship individuals have with their mobile phones, suggests that mobile devices have the potential to influence behavior. However, no previous trials have been conducted using smartphone technology to promote physical activity. This project has the potential to provide robust evidence in this area of innovation. The aim of this study is to evaluate the effectiveness of a smartphone application as an intervention to promote physical activity in primary care. A two-group, parallel randomized controlled trial (RCT) with a main outcome measure of mean difference in daily step count between baseline and follow up over eight weeks. A minimum of 80 active android smartphone users over 16 years of age who are able to undertake moderate physical activity are randomly assigned to the intervention group (n = 40) or to a control group (n = 40) for an eight week period. After randomization, all participants will complete a baseline period of one week during which a baseline mean daily step count will be established. The intervention group will be instructed in the usability features of the smartphone application, will be encouraged to try to achieve 10,000 steps per day as an exercise goal and will be given an exercise promotion leaflet. The control group will be encouraged to try to walk an additional 30 minutes per day along with their normal activity (the equivalent of 10,000 steps) as an exercise goal and will be given an exercise promotion leaflet. The primary outcome is mean difference in daily step count between baseline and follow-up. Secondary outcomes are systolic and diastolic blood pressure, resting heart rate, mental health score using HADS and quality of life score using Euroqol. Randomization and allocation to the intervention and groups will be carried out by an independent researcher, ensuring the allocation sequence is concealed from the study researchers until the interventions are assigned. The primary analysis is based on mean daily step count, comparing the mean difference in daily step count between the baseline and the trial periods in the intervention and control groups at follow up.

Water Quality Monitoring Manual.

ERIC Educational Resources Information Center

Mason, Fred J.; Houdart, Joseph F.

This manual is designed for students involved in environmental education programs dealing with water pollution problems. By establishing a network of Environmental Monitoring Stations within the educational system, four steps toward the prevention, control, and abatement of water pollution are proposed. (1) Train students to recognize, monitor,…

Capture and quality control mechanisms for ATP binding

PubMed Central

Li, Li; Martinis, Susan A.

2013-01-01

The catalytic events in members of the nucleotidylyl transferase superfamily are initiated by a millisecond binding of ATP in the active site. Through metadynamics simulations on a class I aminoacyl-tRNA synthetase (aaRSs), the largest group in the superfamily, we calculate the free energy landscape of ATP selection and binding. Mutagenesis studies and fluorescence spectroscopy validated the identification of the most populated intermediate states. The rapid first binding step involves formation of encounter complexes captured through a fly-casting mechanism that acts up on the triphosphate moiety of ATP. In the slower nucleoside binding step, a conserved histidine in the HxxH motif orients the incoming ATP through base-stacking interactions resulting in a deep minimum in the free energy surface. Mutation of this histidine significantly decreases the binding affinity measured experimentally and computationally. The metadynamics simulations further reveal an intermediate quality control state that the synthetases and most likely other members of the superfamily use to select ATP over other nucleoside triphosphates. PMID:23276298

Comparison of volume estimation methods for pancreatic islet cells

NASA Astrophysics Data System (ADS)

Dvořák, JiřÃ.­; Å vihlík, Jan; Habart, David; Kybic, Jan

2016-03-01

In this contribution we study different methods of automatic volume estimation for pancreatic islets which can be used in the quality control step prior to the islet transplantation. The total islet volume is an important criterion in the quality control. Also, the individual islet volume distribution is interesting -- it has been indicated that smaller islets can be more effective. A 2D image of a microscopy slice containing the islets is acquired. The input of the volume estimation methods are segmented images of individual islets. The segmentation step is not discussed here. We consider simple methods of volume estimation assuming that the islets have spherical or ellipsoidal shape. We also consider a local stereological method, namely the nucleator. The nucleator does not rely on any shape assumptions and provides unbiased estimates if isotropic sections through the islets are observed. We present a simulation study comparing the performance of the volume estimation methods in different scenarios and an experimental study comparing the methods on a real dataset.

Fluorescence analysis of ubiquinone and its application in quality control of medical supplies

NASA Astrophysics Data System (ADS)

Timofeeva, Elvira O.; Gorbunova, Elena V.; Chertov, Aleksandr N.

2017-02-01

The presence of antioxidant issues such as redox potential imbalance in human body is a very important question for modern clinical diagnostics. Implementation of fluorescence analysis into optical diagnostics of such wide distributed in a human body antioxidant as ubiquinone is one of the steps for development of the device with a view to clinical diagnostics of redox potential. Recording of fluorescence was carried out with spectrometer using UV irradiation source with thin band (max at 287 and 330 nm) as a background radiation. Concentrations of ubiquinone from 0.25 to 2.5 mmol/l in explored samples were used for investigation. Recording data was processed using correlation analysis and differential analytical technique. The fourth derivative spectrum of fluorescence spectrum provided the basis for a multicomponent analysis of the solutions. As a technique in clinical diagnostics fluorescence analysis with processing method including differential spectrophotometry, it is step forward towards redox potential calculation and quality control in pharmacy for better health care.

Capture and quality control mechanisms for adenosine-5'-triphosphate binding.

PubMed

Li, Li; Martinis, Susan A; Luthey-Schulten, Zaida

2013-04-24

The catalytic events in members of the nucleotidylyl transferase superfamily are initiated by a millisecond binding of ATP in the active site. Through metadynamics simulations on a class I aminoacyl-tRNA synthetase (aaRSs), the largest group in the superfamily, we calculate the free energy landscape of ATP selection and binding. Mutagenesis studies and fluorescence spectroscopy validated the identification of the most populated intermediate states. The rapid first binding step involves formation of encounter complexes captured through a fly casting mechanism that acts upon the triphosphate moiety of ATP. In the slower nucleoside binding step, a conserved histidine in the HxxH motif orients the incoming ATP through base-stacking interactions resulting in a deep minimum in the free energy surface. Mutation of this histidine significantly decreases the binding affinity measured experimentally and computationally. The metadynamics simulations further reveal an intermediate quality control state that the synthetases and most likely other members of the superfamily use to select ATP over other nucleoside triphosphates.

Quality, equipment hold keys to infection control.

PubMed

2006-02-01

EDs that are the most successful at infection control are the ones that look for new ways to improve on proven strategies and techniques. Follow and observe staff during hand-washing, and make them repeat steps that were omitted or performed improperly. Increase the percentage of isolation rooms in your department to help improve surge capacity. Have all cleaning supplies readily at hand to improve flow.

Maintenance of heartburn relief after step-down from twice-daily proton pump inhibitor to once-daily dexlansoprazole modified release.

PubMed

Fass, Ronnie; Inadomi, John; Han, Cong; Mody, Reema; O'Neil, Janet; Perez, M Claudia

2012-03-01

Many patients with gastroesophageal reflux disease (GERD) take a proton pump inhibitor (PPI) twice daily to control symptoms. Once-daily dexlansoprazole modified release (MR) has a dual-delayed release formulation, making it attractive for step-down management of patients whose symptoms are well controlled on twice-daily PPIs. We investigated whether step-down to once-daily dexlansoprazole controls heartburn in patients with GERD who were receiving twice-daily PPI therapy. Patients 18 years and older taking a twice-daily PPI for symptom control were enrolled (n = 178) in a single-blind, multicenter study; 163 patients completed the study and 142 patients met criteria for the efficacy analysis. During the 6-week screening and treatment periods, patients recorded the presence of heartburn symptoms twice daily in electronic diaries. Patients' heartburn was considered well controlled if they had an average of 1 symptom or fewer per week during the last 4 weeks of screening and treatment. After screening, qualified patients were switched to masked dexlansoprazole MR 30 mg and placebo for 6 weeks. The primary efficacy end point was the proportion of patients whose heartburn remained well controlled after step-down. GERD-related symptoms and quality of life (QOL) also were evaluated using the Patient Assessment of Upper Gastrointestinal Disorders Symptom Severity Index (PAGI-SYM) and the PAGI-QOL questionnaires, respectively. After step-down to once-daily dexlansoprazole MR 30 mg, heartburn remained well controlled in 88% of patients (125 of 142). These patients were able to maintain their GERD-related symptom severity and QOL, indicated by marginal changes in the PAGI-SYM and PAGI-QOL total and subscale scores, respectively. Most patients with GERD who take twice-daily PPI to control heartburn are able to successfully step down to once-daily dexlansoprazole 30 mg. Copyright © 2012 AGA Institute. Published by Elsevier Inc. All rights reserved.

Performance of an attention-demanding task during treadmill walking shifts the noise qualities of step-to-step variation in step width.

PubMed

Grabiner, Mark D; Marone, Jane R; Wyatt, Marilynn; Sessoms, Pinata; Kaufman, Kenton R

2018-06-01

The fractal scaling evident in the step-to-step fluctuations of stepping-related time series reflects, to some degree, neuromotor noise. The primary purpose of this study was to determine the extent to which the fractal scaling of step width, step width and step width variability are affected by performance of an attention-demanding task. We hypothesized that the attention-demanding task would shift the structure of the step width time series toward white, uncorrelated noise. Subjects performed two 10-min treadmill walking trials, a control trial of undisturbed walking and a trial during which they performed a mental arithmetic/texting task. Motion capture data was converted to step width time series, the fractal scaling of which were determined from their power spectra. Fractal scaling decreased by 22% during the texting condition (p < 0.001) supporting the hypothesized shift toward white uncorrelated noise. Step width and step width variability increased 19% and five percent, respectively (p < 0.001). However, a stepwise discriminant analysis to which all three variables were input revealed that the control and dual task conditions were discriminated only by step width fractal scaling. The change of the fractal scaling of step width is consistent with increased cognitive demand and suggests a transition in the characteristics of the signal noise. This may reflect an important advance toward the understanding of the manner in which neuromotor noise contributes to some types of falls. However, further investigation of the repeatability of the results, the sensitivity of the results to progressive increases in cognitive load imposed by attention-demanding tasks, and the extent to which the results can be generalized to the gait of older adults seems warranted. Copyright © 2018 Elsevier B.V. All rights reserved.

A Clean Bill of Health.

ERIC Educational Resources Information Center

American School & University, 1998

1998-01-01

Explores the steps to take to reduce the likelihood that indoor-air-quality (IAQ) problems will develop in educational facilities. Highlights sources and hazards of IAQ when renovating buildings; control strategies and the establishment of IAQ close-out criteria for all renovation projects; heating, ventilation, and air-conditioning system…

MOCAT: A Metagenomics Assembly and Gene Prediction Toolkit

PubMed Central

Li, Junhua; Chen, Weineng; Chen, Hua; Mende, Daniel R.; Arumugam, Manimozhiyan; Pan, Qi; Liu, Binghang; Qin, Junjie; Wang, Jun; Bork, Peer

2012-01-01

MOCAT is a highly configurable, modular pipeline for fast, standardized processing of single or paired-end sequencing data generated by the Illumina platform. The pipeline uses state-of-the-art programs to quality control, map, and assemble reads from metagenomic samples sequenced at a depth of several billion base pairs, and predict protein-coding genes on assembled metagenomes. Mapping against reference databases allows for read extraction or removal, as well as abundance calculations. Relevant statistics for each processing step can be summarized into multi-sheet Excel documents and queryable SQL databases. MOCAT runs on UNIX machines and integrates seamlessly with the SGE and PBS queuing systems, commonly used to process large datasets. The open source code and modular architecture allow users to modify or exchange the programs that are utilized in the various processing steps. Individual processing steps and parameters were benchmarked and tested on artificial, real, and simulated metagenomes resulting in an improvement of selected quality metrics. MOCAT can be freely downloaded at http://www.bork.embl.de/mocat/. PMID:23082188

MOCAT: a metagenomics assembly and gene prediction toolkit.

PubMed

Kultima, Jens Roat; Sunagawa, Shinichi; Li, Junhua; Chen, Weineng; Chen, Hua; Mende, Daniel R; Arumugam, Manimozhiyan; Pan, Qi; Liu, Binghang; Qin, Junjie; Wang, Jun; Bork, Peer

2012-01-01

MOCAT is a highly configurable, modular pipeline for fast, standardized processing of single or paired-end sequencing data generated by the Illumina platform. The pipeline uses state-of-the-art programs to quality control, map, and assemble reads from metagenomic samples sequenced at a depth of several billion base pairs, and predict protein-coding genes on assembled metagenomes. Mapping against reference databases allows for read extraction or removal, as well as abundance calculations. Relevant statistics for each processing step can be summarized into multi-sheet Excel documents and queryable SQL databases. MOCAT runs on UNIX machines and integrates seamlessly with the SGE and PBS queuing systems, commonly used to process large datasets. The open source code and modular architecture allow users to modify or exchange the programs that are utilized in the various processing steps. Individual processing steps and parameters were benchmarked and tested on artificial, real, and simulated metagenomes resulting in an improvement of selected quality metrics. MOCAT can be freely downloaded at http://www.bork.embl.de/mocat/.

Developing stepped care treatment for depression (STEPS): study protocol for a pilot randomised controlled trial.

PubMed

Hill, Jacqueline J; Kuyken, Willem; Richards, David A

2014-11-20

Stepped care is recommended and implemented as a means to organise depression treatment. Compared with alternative systems, it is assumed to achieve equivalent clinical effects and greater efficiency. However, no trials have examined these assumptions. A fully powered trial of stepped care compared with intensive psychological therapy is required but a number of methodological and procedural uncertainties associated with the conduct of a large trial need to be addressed first. STEPS (Developing stepped care treatment for depression) is a mixed methods study to address uncertainties associated with a large-scale evaluation of stepped care compared with high-intensity psychological therapy alone for the treatment of depression. We will conduct a pilot randomised controlled trial with an embedded process study. Quantitative trial data on recruitment, retention and the pathway of patients through treatment will be used to assess feasibility. Outcome data on the effects of stepped care compared with high-intensity therapy alone will inform a sample size calculation for a definitive trial. Qualitative interviews will be undertaken to explore what people think of our trial methods and procedures and the stepped care intervention. A minimum of 60 patients with Major Depressive Disorder will be recruited from an Improving Access to Psychological Therapies service and randomly allocated to receive stepped care or intensive psychological therapy alone. All treatments will be delivered at clinic facilities within the University of Exeter. Quantitative patient-related data on depressive symptoms, worry and anxiety and quality of life will be collected at baseline and 6 months. The pilot trial and interviews will be undertaken concurrently. Quantitative and qualitative data will be analysed separately and then integrated. The outcomes of this study will inform the design of a fully powered randomised controlled trial to evaluate the effectiveness and efficiency of stepped care. Qualitative data on stepped care will be of immediate interest to patients, clinicians, service managers, policy makers and guideline developers. A more informed understanding of the feasibility of a large trial will be obtained than would be possible from a purely quantitative (or qualitative) design. Current Controlled Trials ISRCTN66346646 registered on 2 July 2014.

BatMass: a Java Software Platform for LC-MS Data Visualization in Proteomics and Metabolomics.

PubMed

Avtonomov, Dmitry M; Raskind, Alexander; Nesvizhskii, Alexey I

2016-08-05

Mass spectrometry (MS) coupled to liquid chromatography (LC) is a commonly used technique in metabolomic and proteomic research. As the size and complexity of LC-MS-based experiments grow, it becomes increasingly more difficult to perform quality control of both raw data and processing results. In a practical setting, quality control steps for raw LC-MS data are often overlooked, and assessment of an experiment's success is based on some derived metrics such as "the number of identified compounds". The human brain interprets visual data much better than plain text, hence the saying "a picture is worth a thousand words". Here, we present the BatMass software package, which allows for performing quick quality control of raw LC-MS data through its fast visualization capabilities. It also serves as a testbed for developers of LC-MS data processing algorithms by providing a data access library for open mass spectrometry file formats and a means of visually mapping processing results back to the original data. We illustrate the utility of BatMass with several use cases of quality control and data exploration.

Comparative mass spectrometry & nuclear magnetic resonance metabolomic approaches for nutraceuticals quality control analysis: a brief review.

PubMed

Farag, Mohamed A

2014-01-01

The number of botanical dietary supplements in the market has recently increased primarily due to increased health awareness. Standardization and quality control of the constituents of these plant extracts is an important topic, particularly when such ingredients are used long term as dietary supplements, or in cases where higher doses are marketed as drugs. The development of fast, comprehensive, and effective untargeted analytical methods for plant extracts is of high interest. Nuclear magnetic resonance spectroscopy and mass spectrometry are the most informative tools, each of which enables high-throughput and global analysis of hundreds of metabolites in a single step. Although only one of the two techniques is utilized in the majority of plant metabolomics applications, there is a growing interest in combining the data from both platforms to effectively unravel the complexity of plant samples. The application of combined MS and NMR in the quality control of nutraceuticals forms the major part of this review. Finally I will look at the future developments and perspectives of these two technologies for the quality control of herbal materials.

BatMass: a Java software platform for LC/MS data visualization in proteomics and metabolomics

PubMed Central

Avtonomov, Dmitry; Raskind, Alexander; Nesvizhskii, Alexey I.

2017-01-01

Mass spectrometry (MS) coupled to liquid chromatography (LC) is a commonly used technique in metabolomic and proteomic research. As the size and complexity of LC/MS based experiments grow, it becomes increasingly more difficult to perform quality control of both raw data and processing results. In a practical setting, quality control steps for raw LC/MS data are often overlooked and assessment of an experiment's success is based on some derived metrics such as “the number of identified compounds”. Human brain interprets visual data much better than plain text, hence the saying “a picture is worth a thousand words”. Here we present BatMass software package which allows to perform quick quality control of raw LC/MS data through its fast visualization capabilities. It also serves as a testbed for developers of LC/MS data processing algorithms by providing a data access library for open mass spectrometry file formats and a means of visually mapping processing results back to the original data. We illustrate the utility of BatMass with several use cases of quality control and data exploration. PMID:27306858

Real-time control of hind limb functional electrical stimulation using feedback from dorsal root ganglia recordings

NASA Astrophysics Data System (ADS)

Bruns, Tim M.; Wagenaar, Joost B.; Bauman, Matthew J.; Gaunt, Robert A.; Weber, Douglas J.

2013-04-01

Objective. Functional electrical stimulation (FES) approaches often utilize an open-loop controller to drive state transitions. The addition of sensory feedback may allow for closed-loop control that can respond effectively to perturbations and muscle fatigue. Approach. We evaluated the use of natural sensory nerve signals obtained with penetrating microelectrode arrays in lumbar dorsal root ganglia (DRG) as real-time feedback for closed-loop control of FES-generated hind limb stepping in anesthetized cats. Main results. Leg position feedback was obtained in near real-time at 50 ms intervals by decoding the firing rates of more than 120 DRG neurons recorded simultaneously. Over 5 m of effective linear distance was traversed during closed-loop stepping trials in each of two cats. The controller compensated effectively for perturbations in the stepping path when DRG sensory feedback was provided. The presence of stimulation artifacts and the quality of DRG unit sorting did not significantly affect the accuracy of leg position feedback obtained from the linear decoding model as long as at least 20 DRG units were included in the model. Significance. This work demonstrates the feasibility and utility of closed-loop FES control based on natural neural sensors. Further work is needed to improve the controller and electrode technologies and to evaluate long-term viability.

Real-time control of hind limb functional electrical stimulation using feedback from dorsal root ganglia recordings

PubMed Central

Bruns, Tim M; Wagenaar, Joost B; Bauman, Matthew J; Gaunt, Robert A; Weber, Douglas J

2013-01-01

Objective Functional electrical stimulation (FES) approaches often utilize an open-loop controller to drive state transitions. The addition of sensory feedback may allow for closed-loop control that can respond effectively to perturbations and muscle fatigue. Approach We evaluated the use of natural sensory nerve signals obtained with penetrating microelectrode arrays in lumbar dorsal root ganglia (DRG) as real-time feedback for closed-loop control of FES-generated hind limb stepping in anesthetized cats. Main results Leg position feedback was obtained in near real-time at 50 ms intervals by decoding the firing rates of more than 120 DRG neurons recorded simultaneously. Over 5 m of effective linear distance was traversed during closed-loop stepping trials in each of two cats. The controller compensated effectively for perturbations in the stepping path when DRG sensory feedback was provided. The presence of stimulation artifacts and the quality of DRG unit sorting did not significantly affect the accuracy of leg position feedback obtained from the linear decoding model as long as at least 20 DRG units were included in the model. Significance This work demonstrates the feasibility and utility of closed-loop FES control based on natural neural sensors. Further work is needed to improve the controller and electrode technologies and to evaluate long-term viability. PMID:23503062

Off-Line Quality Control In Integrated Circuit Fabrication Using Experimental Design

NASA Astrophysics Data System (ADS)

Phadke, M. S.; Kackar, R. N.; Speeney, D. V.; Grieco, M. J.

1987-04-01

Off-line quality control is a systematic method of optimizing production processes and product designs. It is widely used in Japan to produce high quality products at low cost. The method was introduced to us by Professor Genichi Taguchi who is a Deming-award winner and a former Director of the Japanese Academy of Quality. In this paper we will i) describe the off-line quality control method, and ii) document our efforts to optimize the process for forming contact windows in 3.5 Aim CMOS circuits fabricated in the Murray Hill Integrated Circuit Design Capability Laboratory. In the fabrication of integrated circuits it is critically important to produce contact windows of size very near the target dimension. Windows which are too small or too large lead to loss of yield. The off-line quality control method has improved both the process quality and productivity. The variance of the window size has been reduced by a factor of four. Also, processing time for window photolithography has been substantially reduced. The key steps of off-line quality control are: i) Identify important manipulatable process factors and their potential working levels. ii) Perform fractional factorial experiments on the process using orthogonal array designs. iii) Analyze the resulting data to determine the optimum operating levels of the factors. Both the process mean and the process variance are considered in this analysis. iv) Conduct an additional experiment to verify that the new factor levels indeed give an improvement.

A case management tool for occupational health nurses: development, testing, and application.

PubMed

Mannon, J A; Conrad, K M; Blue, C L; Muran, S

1994-08-01

1. Case management is a process of coordinating an individual client's health care services to achieve optimal, quality care delivered in a cost effective manner. The case manager establishes a provider network, recommends treatment plans that assure quality and efficacy while controlling costs, monitors outcomes, and maintains a strong communication link among all the parties. 2. Through development of audit tools such as the one presented in this article, occupational health nurses can document case management activities and provide employers with measurable outcomes. 3. The Case Management Activity Checklist was tested using data from 61 firefighters' musculoskeletal injury cases. 4. The activities on the checklist are a step by step process: case identification/case disposition; assessment; return to work plan; resource identification; collaborative communication; and evaluation.

Quality Control Testing for Tracking Endotoxin-Producing Gram-Negative Bacteria during the Preparation of Polyvalent Snake Antivenom Immunoglobulin.

PubMed

Sheraba, Norhan S; Diab, Mohamed R; Yassin, Aymen S; Amin, Magdy A; Zedan, Hamdallah H

2015-01-01

Snake bites represent a serious public health problem, particularly in rural areas worldwide. Antitoxic sera preparations are antibodies from immunized animals and are considered to be the only treatment option. The purification of antivenom antibodies should aim at obtaining products of consistent quality, safety, efficacy, and adherence to good manufacturing practice principles. Endotoxins are an integral component of the outer cell surface of Gram-negative bacteria. They are common contaminates of the raw materials and processing equipment used in the manufacturing of antivenoms. In this work, and as a part of quality control testing, we establish and examine an environmental monitoring program for identification of potential sources of endotoxin-producing Gram-negative bacteria throughout the whole steps of antivenom preparation. In addition, we follow all the steps of preparation starting from crude plasma till finished product using a validated sterility and endotoxin testing.Samples from air, surface, and personnel were collected and examined through various stages of manufacturing for the potential presence of Gram-negative bacteria. A validated sterility and endotoxin test was carried out in parallel at the different production steps. The results showed that air contributed to the majority of bacterial isolates detected (48.43%), followed by surfaces (37.5%) and then personnel (14%). The most common bacterial isolates detected were Achromobacter xylosoxidans, Ochrobactrum anthropi, and Pseudomonas aeruginosa, which together with Burkholderia cepacia were both also detected in cleaning water and certain equipment parts. A heavy bacterial growth with no fungal contamination was observed in all stages of antivenom manufacturing excluding the formulation stage. All samples were positive for endotoxin including the finished product.Implementation and continued evaluation of quality assurance and quality improvement programs in aseptic preparation is essential in ensuring the safety and quality of these products. Antitoxic sera preparations are the only treatment option for snake bites worldwide. They are prepared by immunizing animals, usually horses, with snake venom and collecting horse plasma, which is then subjected to several purification steps in order to finally prepare the purified immunoglobulins. Components of the bacterial cell wall known as endotoxins can constitute a potential hazardous contamination known as pyrogen in antisera, which can lead to fever and many other adverse reactions to the person subjected to it.In this work, we monitored the environment associated with the different steps of production and purification of snake antivenom prepared from immunized horses. We examined the air quality, surface, and personnel for possible sources of contamination, particularly the presence of Gram-negative bacteria, which is the major source of endotoxin presence. We also monitored all stages of preparation by sterility and endotoxin testing. Our results showed that air contributed to the majority of bacterial isolates. Sterility testing revealed the presence of bacterial contamination in all the intermediate steps, as only the final preparation after filtration was sterile. Endotoxin was present in all tested samples and the final product. Good manufacturing practice procedures are essential in any facility involved in antisera production. © PDA, Inc. 2015.

Bibliographic Control of Large Quantities of Research Material.

ERIC Educational Resources Information Center

Evans, Martha M.

1983-01-01

Guidelines for individual researcher describe bibliographic methods for achieving high standards of quality while maintaining maximum efficiency in each step of all necessary procedures involved in the construction of a bibliography ranging from several hundred to several thousand items. Ways to minimize waste motion and duplication of effort are…

Production and engineering methods for CARB: TEK (trade name) batteries in fork lift trucks

NASA Astrophysics Data System (ADS)

Schaefer, J. C.

1975-03-01

The purpose of this program is to develop the manufacturing technology of the Carb Tek molten salt Li/Cl battery to the prototype level. This purpose is being accomplished by actually constructing cells on a pilot line, optimizing process steps, establishing quality control procedures, and engineering appropriate changes. The majority of the cell work is performed in a controlled argon atmosphere. Results show that the carbon selected for the cell cathode can develop the required 5 Whr/cubic inch even when damaged by stress cracks. Anode contamination and fabrication problems have been reduced by a new alloying technique. Cell yields are dependent on weld quality.

Honing process optimization algorithms

NASA Astrophysics Data System (ADS)

Kadyrov, Ramil R.; Charikov, Pavel N.; Pryanichnikova, Valeria V.

2018-03-01

This article considers the relevance of honing processes for creating high-quality mechanical engineering products. The features of the honing process are revealed and such important concepts as the task for optimization of honing operations, the optimal structure of the honing working cycles, stepped and stepless honing cycles, simulation of processing and its purpose are emphasized. It is noted that the reliability of the mathematical model determines the quality parameters of the honing process control. An algorithm for continuous control of the honing process is proposed. The process model reliably describes the machining of a workpiece in a sufficiently wide area and can be used to operate the CNC machine CC743.

Drying based on temperature-detection-assisted control in microwave-assisted pulse-spouted vacuum drying.

PubMed

Cao, Xiaohuang; Zhang, Min; Qian, He; Mujumdar, Arun S

2017-06-01

An online temperature-detection-assisted control system of microwave-assisted pulse-spouted vacuum drying was newly developed. By using this system, temperature control can be automatically and continuously adjusted based on the detection of drying temperature and preset temperature. Various strategies for constant temperature control, linear temperature control and three-step temperature control were applied to drying carrot cubes. Drying kinetics and the quality of various temperature-controlled strategies online are evaluated for the new drying technology as well as its suitability as an alternative drying method. Drying time in 70 °C mode 1 had the shortest drying time and lowest energy consumption in all modes. A suitable colour, highest re-hydration ratio and fracture-hardness, and longest drying time occurred in 30-40-50 °C mode 3. The number of hot spots was reduced in 40-50-60 °C mode 3. Acceptable carrot snacks were obtained in 50-60-70 °C mode 3 and 70 °C mode 2. All temperature curves showed that the actual temperatures followed the preset temperatures appropriately. With this system, a linear temperature-controlled strategy and a three-step temperature-controlled strategy can improve product quality and heating non-uniformity compared to constant temperature control, but need greater energy consumption and longer drying time. A temperature-detection-assisted control system was developed for providing various drying strategies as a suitable alternative in making a snack product. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Mass imbalances in EPANET water-quality simulations

NASA Astrophysics Data System (ADS)

Davis, Michael J.; Janke, Robert; Taxon, Thomas N.

2018-04-01

EPANET is widely employed to simulate water quality in water distribution systems. However, in general, the time-driven simulation approach used to determine concentrations of water-quality constituents provides accurate results only for short water-quality time steps. Overly long time steps can yield errors in concentration estimates and can result in situations in which constituent mass is not conserved. The use of a time step that is sufficiently short to avoid these problems may not always be feasible. The absence of EPANET errors or warnings does not ensure conservation of mass. This paper provides examples illustrating mass imbalances and explains how such imbalances can occur because of fundamental limitations in the water-quality routing algorithm used in EPANET. In general, these limitations cannot be overcome by the use of improved water-quality modeling practices. This paper also presents a preliminary event-driven approach that conserves mass with a water-quality time step that is as long as the hydraulic time step. Results obtained using the current approach converge, or tend to converge, toward those obtained using the preliminary event-driven approach as the water-quality time step decreases. Improving the water-quality routing algorithm used in EPANET could eliminate mass imbalances and related errors in estimated concentrations. The results presented in this paper should be of value to those who perform water-quality simulations using EPANET or use the results of such simulations, including utility managers and engineers.

An integrated toolbox for processing and analysis of remote sensing data of inland and coastal waters - atmospheric correction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haan, J.F. de; Kokke, J.M.M.; Hoogenboom, H.J.

1997-06-01

Deriving thematic maps of water quality parameters from a remote sensing image requires a number of processing steps, such as calibration, atmospheric correction, air-water interface correction, and application of water quality algorithms. A prototype version of an integrated software environment has recently been developed that enables the user to perform and control these processing steps. Major parts of this environment are: (i) access to the MODTRAN 3 radiative transfer code, (ii) a database of water quality algorithms, and (iii) a spectral library of Dutch coastal and inland waters, containing subsurface irradiance reflectance spectra and associated water quality parameters. The atmosphericmore » correction part of this environment is discussed here. It is shown that this part can be used to accurately retrieve spectral signatures of inland water for wavelengths between 450 and 750 nm, provided in situ measurements are used to determine atmospheric model parameters. Assessment of the usefulness of the completely integrated software system in an operational environment requires a revised version that is presently being developed.« less

Impact of artifact removal on ChIP quality metrics in ChIP-seq and ChIP-exo data

PubMed Central

Carroll, Thomas S.; Liang, Ziwei; Salama, Rafik; Stark, Rory; de Santiago, Ines

2014-01-01

With the advent of ChIP-seq multiplexing technologies and the subsequent increase in ChIP-seq throughput, the development of working standards for the quality assessment of ChIP-seq studies has received significant attention. The ENCODE consortium's large scale analysis of transcription factor binding and epigenetic marks as well as concordant work on ChIP-seq by other laboratories has established a new generation of ChIP-seq quality control measures. The use of these metrics alongside common processing steps has however not been evaluated. In this study, we investigate the effects of blacklisting and removal of duplicated reads on established metrics of ChIP-seq quality and show that the interpretation of these metrics is highly dependent on the ChIP-seq preprocessing steps applied. Further to this we perform the first investigation of the use of these metrics for ChIP-exo data and make recommendations for the adaptation of the NSC statistic to allow for the assessment of ChIP-exo efficiency. PMID:24782889

A 10 cm Dual Frequency Doppler Weather Radar. Part I. The Radar System.

DTIC Science & Technology

1982-10-25

Evaluation System ( RAMCES )". The step attenuator required for this calibration can be programmed remotely, has low power and temperature coefficients, and...Control and Evaluation System". The Quality Assurance/Fault Location Network makes use of fault location techniques at critical locations in the radar and...quasi-con- tinuous monitoring of radar performance. The Radar Monitor, Control and Evaluation System provides for automated system calibration and

Quality assurance of the international computerised 24 h dietary recall method (EPIC-Soft).

PubMed

Crispim, Sandra P; Nicolas, Genevieve; Casagrande, Corinne; Knaze, Viktoria; Illner, Anne-Kathrin; Huybrechts, Inge; Slimani, Nadia

2014-02-01

The interview-administered 24 h dietary recall (24-HDR) EPIC-Soft® has a series of controls to guarantee the quality of dietary data across countries. These comprise all steps that are part of fieldwork preparation, data collection and data management; however, a complete characterisation of these quality controls is still lacking. The present paper describes in detail the quality controls applied in EPIC-Soft, which are, to a large extent, built on the basis of the EPIC-Soft error model and are present in three phases: (1) before, (2) during and (3) after the 24-HDR interviews. Quality controls for consistency and harmonisation are implemented before the interviews while preparing the seventy databases constituting an EPIC-Soft version (e.g. pre-defined and coded foods and recipes). During the interviews, EPIC-Soft uses a cognitive approach by helping the respondent to recall the dietary intake information in a stepwise manner and includes controls for consistency (e.g. probing questions) as well as for completeness of the collected data (e.g. system calculation for some unknown amounts). After the interviews, a series of controls can be applied by dietitians and data managers to further guarantee data quality. For example, the interview-specific 'note files' that were created to track any problems or missing information during the interviews can be checked to clarify the information initially provided. Overall, the quality controls employed in the EPIC-Soft methodology are not always perceivable, but prove to be of assistance for its overall standardisation and possibly for the accuracy of the collected data.

Design and numerical evaluation of full-authority flight control systems for conventional and thruster-augmented helicopters employed in NOE operations

NASA Technical Reports Server (NTRS)

Perri, Todd A.; Mckillip, R. M., Jr.; Curtiss, H. C., Jr.

1987-01-01

The development and methodology is presented for development of full-authority implicit model-following and explicit model-following optimal controllers for use on helicopters operating in the Nap-of-the Earth (NOE) environment. Pole placement, input-output frequency response, and step input response were used to evaluate handling qualities performance. The pilot was equipped with velocity-command inputs. A mathematical/computational trajectory optimization method was employed to evaluate the ability of each controller to fly NOE maneuvers. The method determines the optimal swashplate and thruster input histories from the helicopter's dynamics and the prescribed geometry and desired flying qualities of the maneuver. Three maneuvers were investigated for both the implicit and explicit controllers with and without auxiliary propulsion installed: pop-up/dash/descent, bob-up at 40 knots, and glideslope. The explicit controller proved to be superior to the implicit controller in performance and ease of design.

Construction of quality-assured infant feeding process of care data repositories: definition and design (Part 1).

PubMed

Garcí A-de-León-Chocano, Ricardo; Sáez, Carlos; Muñoz-Soler, Verónica; Garcí A-de-León-González, Ricardo; García-Gómez, Juan M

2015-12-01

This is the first paper of a series of two regarding the construction of data quality (DQ) assured repositories for the reuse of information on infant feeding from birth until two years old. This first paper justifies the need for such repositories and describes the design of a process to construct them from Electronic Health Records (EHR). As a result, Part 1 proposes a computational process to obtain quality-assured datasets represented by a canonical structure extracted from raw data from multiple EHR. For this, 13 steps were defined to ensure the harmonization, standardization, completion, de-duplication, and consistency of the dataset content. Moreover, the quality of the input and output data for each of these steps is controlled according to eight DQ dimensions: predictive value, correctness, duplication, consistency, completeness, contextualization, temporal-stability and spatial-stability. The second paper of the series will describe the application of this computational process to construct the first quality-assured repository for the reuse of information on infant feeding in the perinatal period aimed at the monitoring of clinical activities and research. Copyright © 2015 Elsevier Ltd. All rights reserved.

PRECEPT: an evidence assessment framework for infectious disease epidemiology, prevention and control.

PubMed

Harder, Thomas; Takla, Anja; Eckmanns, Tim; Ellis, Simon; Forland, Frode; James, Roberta; Meerpohl, Joerg J; Morgan, Antony; Rehfuess, Eva; Schünemann, Holger; Zuiderent-Jerak, Teun; de Carvalho Gomes, Helena; Wichmann, Ole

2017-10-01

Decisions in public health should be based on the best available evidence, reviewed and appraised using a rigorous and transparent methodology. The Project on a Framework for Rating Evidence in Public Health (PRECEPT) defined a methodology for evaluating and grading evidence in infectious disease epidemiology, prevention and control that takes different domains and question types into consideration. The methodology rates evidence in four domains: disease burden, risk factors, diagnostics and intervention. The framework guiding it has four steps going from overarching questions to an evidence statement. In step 1, approaches for identifying relevant key areas and developing specific questions to guide systematic evidence searches are described. In step 2, methodological guidance for conducting systematic reviews is provided; 15 study quality appraisal tools are proposed and an algorithm is given for matching a given study design with a tool. In step 3, a standardised evidence-grading scheme using the Grading of Recommendations Assessment, Development and Evaluation Working Group (GRADE) methodology is provided, whereby findings are documented in evidence profiles. Step 4 consists of preparing a narrative evidence summary. Users of this framework should be able to evaluate and grade scientific evidence from the four domains in a transparent and reproducible way.

PRECEPT: an evidence assessment framework for infectious disease epidemiology, prevention and control

PubMed Central

Harder, Thomas; Takla, Anja; Eckmanns, Tim; Ellis, Simon; Forland, Frode; James, Roberta; Meerpohl, Joerg J; Morgan, Antony; Rehfuess, Eva; Schünemann, Holger; Zuiderent-Jerak, Teun; de Carvalho Gomes, Helena; Wichmann, Ole

2017-01-01

Decisions in public health should be based on the best available evidence, reviewed and appraised using a rigorous and transparent methodology. The Project on a Framework for Rating Evidence in Public Health (PRECEPT) defined a methodology for evaluating and grading evidence in infectious disease epidemiology, prevention and control that takes different domains and question types into consideration. The methodology rates evidence in four domains: disease burden, risk factors, diagnostics and intervention. The framework guiding it has four steps going from overarching questions to an evidence statement. In step 1, approaches for identifying relevant key areas and developing specific questions to guide systematic evidence searches are described. In step 2, methodological guidance for conducting systematic reviews is provided; 15 study quality appraisal tools are proposed and an algorithm is given for matching a given study design with a tool. In step 3, a standardised evidence-grading scheme using the Grading of Recommendations Assessment, Development and Evaluation Working Group (GRADE) methodology is provided, whereby findings are documented in evidence profiles. Step 4 consists of preparing a narrative evidence summary. Users of this framework should be able to evaluate and grade scientific evidence from the four domains in a transparent and reproducible way. PMID:29019317

A New Quality Control Method base on IRMCD for Wind Profiler Observation towards Future Assimilation Application

NASA Astrophysics Data System (ADS)

Chen, Min; Zhang, Yu

2017-04-01

A wind profiler network with a total of 65 profiling radars was operated by the MOC/CMA in China until July 2015. In this study, a quality control procedure is constructed to incorporate the profiler data from the wind-profiling network into the local data assimilation and forecasting system (BJRUC). The procedure applies a blacklisting check that removes stations with gross errors and an outlier check that rejects data with large deviations from the background. Instead of the bi-weighting method, which has been commonly implemented in outlier elimination for one-dimensional scalar observations, an outlier elimination method is developed based on the iterated reweighted minimum covariance determinant (IRMCD) for multi-variate observations such as wind profiler data. A quality control experiment is separately performed for subsets containing profiler data tagged in parallel with/without rain flags at every 00UTC/12UTC from 20 June to 30 Sep 2015. From the results, we find that with the quality control, the frequency distributions of the differences between the observations and model background become more Gaussian-like and meet the requirements of a Gaussian distribution for data assimilation. Further intensive assessment for each quality control step reveals that the stations rejected by blacklisting contain poor data quality, and the IRMCD rejects outliers in a robust and physically reasonable manner.

Building high-quality assay libraries for targeted analysis of SWATH MS data.

PubMed

Schubert, Olga T; Gillet, Ludovic C; Collins, Ben C; Navarro, Pedro; Rosenberger, George; Wolski, Witold E; Lam, Henry; Amodei, Dario; Mallick, Parag; MacLean, Brendan; Aebersold, Ruedi

2015-03-01

Targeted proteomics by selected/multiple reaction monitoring (S/MRM) or, on a larger scale, by SWATH (sequential window acquisition of all theoretical spectra) MS (mass spectrometry) typically relies on spectral reference libraries for peptide identification. Quality and coverage of these libraries are therefore of crucial importance for the performance of the methods. Here we present a detailed protocol that has been successfully used to build high-quality, extensive reference libraries supporting targeted proteomics by SWATH MS. We describe each step of the process, including data acquisition by discovery proteomics, assertion of peptide-spectrum matches (PSMs), generation of consensus spectra and compilation of MS coordinates that uniquely define each targeted peptide. Crucial steps such as false discovery rate (FDR) control, retention time normalization and handling of post-translationally modified peptides are detailed. Finally, we show how to use the library to extract SWATH data with the open-source software Skyline. The protocol takes 2-3 d to complete, depending on the extent of the library and the computational resources available.

Synthesis and quality control of fluorodeoxyglucose and performance assessment of Siemens MicroFocus 220 small animal PET scanner

NASA Astrophysics Data System (ADS)

Phaterpekar, Siddhesh Nitin

The scope of this article is to cover the synthesis and quality control procedures involved in production of Fludeoxyglucose (18F--FDG). The article also describes the cyclotron production of 18F radioisotope and gives a brief overview on operations and working of a fixed energy medical cyclotron. The quality control procedures for FDG involve radiochemical and radionuclidic purity tests, pH tests, chemical purity tests, sterility tests, endotoxin tests. Each of these procedures were carried out for multiple batches of FDG with a passing rate of 95% among 20 batches. The article also covers the quality assurance steps for the Siemens MicroPET Focus 220 Scanner using a Jaszczak phantom. We have carried out spatial resolution tests on the scanner, with an average transaxial resolution of 1.775mm with 2-3mm offset. Tests involved detector efficiency, blank scan sinograms and transmission sinograms. A series of radioactivity distribution tests are also carried out on a uniform phantom, denoting the variations in radioactivity and uniformity by using cylindrical ROIs in the transverse region of the final image. The purpose of these quality control tests is to make sure the manufactured FDG is biocompatible with the human body. Quality assurance tests are carried on PET scanners for efficient performance, and to make sure the quality of images acquired is according to the radioactivity distribution in the subject of interest.

Taking Healthy Steps: rationale, design and baseline characteristics of a randomized trial of a pedometer-based internet-mediated walking program in veterans with chronic obstructive pulmonary disease

PubMed Central

2014-01-01

Background Low levels of physical activity are common in patients with chronic obstructive pulmonary disease (COPD), and a sedentary lifestyle is associated with poor outcomes including increased mortality, frequent hospitalizations, and poor health-related quality of life. Internet-mediated physical activity interventions may increase physical activity and improve health outcomes in persons with COPD. Methods/Design This manuscript describes the design and rationale of a randomized controlled trial that tests the effectiveness of Taking Healthy Steps, an Internet-mediated walking program for Veterans with COPD. Taking Healthy Steps includes an uploading pedometer, a website, and an online community. Eligible and consented patients wear a pedometer to obtain one week of baseline data and then are randomized on a 2:1 ratio to Taking Healthy Steps or to a wait list control. The intervention arm receives iterative step-count feedback; individualized step-count goals, motivational and informational messages, and access to an online community. Wait list controls are notified that they are enrolled, but that their intervention will start in one year; however, they keep the pedometer and have access to a static webpage. Discussion Participants include 239 Veterans (mean age 66.7 years, 93.7% male) with 155 randomized to Taking Healthy Steps and 84 to the wait list control arm; rural-living (45.2%); ever-smokers (93.3%); and current smokers (25.1%). Baseline mean St. George’s Respiratory Questionnaire Total Score was 46.0; 30.5% reported severe dyspnea; and the average number of comorbid conditions was 4.9. Mean baseline daily step counts was 3497 (+/- 2220). Veterans with COPD can be recruited to participate in an online walking program. We successfully recruited a cohort of older Veterans with a significant level of disability including Veterans who live in rural areas using a remote national recruitment strategy. Trial registration Clinical Trials.gov NCT01102777 PMID:24491137

Effectiveness and Cost-effectiveness of Opportunistic Screening and Stepped-care Interventions for Older Alcohol Users in Primary Care.

PubMed

Coulton, Simon; Bland, Martin; Crosby, Helen; Dale, Veronica; Drummond, Colin; Godfrey, Christine; Kaner, Eileen; Sweetman, Jennifer; McGovern, Ruth; Newbury-Birch, Dorothy; Parrott, Steve; Tober, Gillian; Watson, Judith; Wu, Qi

2017-11-01

To compare the clinical effectiveness and cost-effectiveness of a stepped-care intervention versus a minimal intervention for the treatment of older hazardous alcohol users in primary care. Multi-centre, pragmatic RCT, set in Primary Care in UK. Patients aged ≥ 55 years scoring ≥ 8 on the Alcohol Use Disorders Identification Test were allocated either to 5-min of brief advice or to 'Stepped Care': an initial 20-min of behavioural change counselling, with Step 2 being three sessions of Motivational Enhancement Therapy and Step 3 referral to local alcohol services (progression between each Step being determined by outcomes 1 month after each Step). Outcome measures included average drinks per day, AUDIT-C, alcohol-related problems using the Drinking Problems Index, health-related quality of life using the Short Form 12, costs measured from a NHS/Personal Social Care perspective and estimated health gains in quality adjusted life-years measured assessed EQ-5D. Both groups reduced alcohol consumption at 12 months but the difference between groups was small and not significant. No significant differences were observed between the groups on secondary outcomes. In economic terms stepped care was less costly and more effective than the minimal intervention. Stepped care does not confer an advantage over a minimal intervention in terms of reduction in alcohol use for older hazardous alcohol users in primary care. However, stepped care has a greater probability of being more cost-effective. Current controlled trials ISRCTN52557360. A stepped care approach was compared with brief intervention for older at-risk drinkers attending primary care. While consumption reduced in both groups over 12 months there was no significant difference between the groups. An economic analysis indicated the stepped care which had a greater probability of being more cost-effective than brief intervention. © The Author 2017. Medical Council on Alcohol and Oxford University Press. All rights reserved.

The effect of step stool use and provider height on CPR quality during pediatric cardiac arrest: A simulation-based multicentre study.

PubMed

Cheng, Adam; Lin, Yiqun; Nadkarni, Vinay; Wan, Brandi; Duff, Jonathan; Brown, Linda; Bhanji, Farhan; Kessler, David; Tofil, Nancy; Hecker, Kent; Hunt, Elizabeth A

2018-01-01

We aimed to explore whether a) step stool use is associated with improved cardiopulmonary resuscitation (CPR) quality; b) provider adjusted height is associated with improved CPR quality; and if associations exist, c) determine whether just-in-time (JIT) CPR training and/or CPR visual feedback attenuates the effect of height and/or step stool use on CPR quality. We analysed data from a trial of simulated cardiac arrests with three study arms: No intervention; CPR visual feedback; and JIT CPR training. Step stool use was voluntary. We explored the association between 1) step stool use and CPR quality, and 2) provider adjusted height and CPR quality. Adjusted height was defined as provider height + 23 cm (if step stool was used). Below-average height participants were ≤ gender-specific average height; the remainder were above average height. We assessed for interaction between study arm and both adjusted height and step stool use. One hundred twenty-four subjects participated; 1,230 30-second epochs of CPR were analysed. Step stool use was associated with improved compression depth in below-average (female, p=0.007; male, p<0.001) and above-average (female, p=0.001; male, p<0.001) height providers. There is an association between adjusted height and compression depth (p<0.001). Visual feedback attenuated the effect of height (p=0.025) on compression depth; JIT training did not (p=0.918). Visual feedback and JIT training attenuated the effect of step stool use (p<0.001) on compression depth. Step stool use is associated with improved compression depth regardless of height. Increased provider height is associated with improved compression depth, with visual feedback attenuating the effects of height and step stool use.

Inculcating Quality Concepts in the US Air Force: Right Music, Wrong Step

DTIC Science & Technology

1994-04-01

CONCEPTS IN THE US AIR FORCE: RIGHT MUSIC , WRONG STEP Acceslon For NTIS CRA&J DTIC TAB Unannounced fJ by Justification Barbara A. Kucharczyk By. Lieutenant...TITLE: Inculcating Quality Concepts in the US Air Force: Right Music , Wrong Step AUTHOR: Barbara A. Kucharczyk, Lieutenant Colonel, USAF In its...perceived attitudinal backlash.4 While basic quality concepts are certainly the right music , many Air Force members are dancing the wrong step. Why? This

Lean body mass, physical activity and quality of life in paediatric patients with inflammatory bowel disease and in healthy controls.

PubMed

Werkstetter, Katharina J; Ullrich, Jennifer; Schatz, Stephanie B; Prell, Christine; Koletzko, Berthold; Koletzko, Sibylle

2012-07-01

Physical activity is important for muscle and bone strength in the growing child and may be impaired in paediatric patients with inflammatory bowel disease (IBD) even during quiescent disease. The SenseWearPro(2) armband allows to measure physical activity under everyday life conditions. Thirty-nine IBD patients (27 Crohn's disease, 12 ulcerative colitis, 24 boys) in remission (n=26) or with only mild disease activity (n=13) were compared to 39 healthy age and sex-matched controls. Body weight, height, body mass index (BMI), lean body mass as phase angle α (determined by bioelectrical impedance analysis), and dynamometric grip force were expressed as age- and sex-related Z-scores. SenseWearPro(2) armbands were applied for three consecutive days to record number of steps, duration of physical activity and sleeping time. Quality of life was assessed with the German KINDL and IMPACT III questionnaires, energy intake with prospective food protocols. Differences between patients and pair-matched controls were analysed by paired t-test. Patients showed lower Z-scores for phase angle α (difference -0.72; 95% CI [-1.10; -0.34]) and lower grip strength (-1.02 [-1.58; -0.47]) than controls. They tended towards lesser number of steps per day (-1339 [-2760; 83]) and shorter duration of physical activity (-0.44 h [-0.94; 0.06]), particularly in females and patients with mild disease. Quality of life and energy intake did not differ between patients and controls. In spite of quiescent disease lean body mass and physical activity were reduced. Interventions to encourage physical activity may be beneficial in this lifelong disease. Copyright © 2011 European Crohn's and Colitis Organisation. Published by Elsevier B.V. All rights reserved.

Emission controls and changes in air quality in Guangzhou during the Asian Games

NASA Astrophysics Data System (ADS)

Liu, Huan; Wang, Xuemei; Zhang, Jinpu; He, Kebin; Wu, Ye; Xu, Jiayu

2013-09-01

With the new air quality standards forthcoming in China, the Pearl River Delta region is facing new challenges to achieve its air quality goal. The success of the emission reduction measures introduced by local authorities in the run-up to the Guangzhou Asian Games demonstrated that the Pearl River Delta air quality can be improved by introducing integrated emission reduction measures. This paper combines observation data, emission reduction measures, and air quality simulations that were applied during the Asian Games (12-27 November 2010) to analyze the relationship between emissions and concentrations of pollutants in Guangzhou. The Asian Games abatement strategy totally reduced emissions of 41.1% SO2, 41.9% NOx, 26.5% PM10, 25.8% PM2.5 and 39.7% VOC. The concentrations of SO2, NO2, PM10 and PM2.5 were reduced by 66.8%, 51.3%, 21.5% and 17.1%, respectively. In Guangzhou, the main challenge to be overcome with the new air quality daily requirements is mostly for NO2, PM2.5, and hourly ozone maxima. If pollutants maintain the same concentrations before and after the Asian Games, there will be 47.4% and 31.6% non-attainment days for NO2 and PM2.5 respectively as a period average. Although PM10 concentration can meet the daily limits (150 μg m-3), it is quite difficult to meet the annual limit value (70 μg m-3). One important implication is that the long-term, step-by-step integrated measures of the past six years work better than the strict, intensive, short-term measures on SO2, NO2 and VOC control. Dust control by limiting construction sites and watering the roads can further reduce 12.8% of the PM10 concentration. However, to reduce ambient PM2.5, the abatement strategy should be more complex and extensive. On the contrary, ozone pollution was not improved during the Asian Games, indicating that alleviation strategies should be improved by scientific studies to determine the appropriate control ratio of NO2 and VOC in the Pearl River Delta region.

Six-sigma application in tire-manufacturing company: a case study

NASA Astrophysics Data System (ADS)

Gupta, Vikash; Jain, Rahul; Meena, M. L.; Dangayach, G. S.

2017-09-01

Globalization, advancement of technologies, and increment in the demand of the customer change the way of doing business in the companies. To overcome these barriers, the six-sigma define-measure-analyze-improve-control (DMAIC) method is most popular and useful. This method helps to trim down the wastes and generating the potential ways of improvement in the process as well as service industries. In the current research, the DMAIC method was used for decreasing the process variations of bead splice causing wastage of material. This six-sigma DMAIC research was initiated by problem identification through voice of customer in the define step. The subsequent step constitutes of gathering the specification data of existing tire bead. This step was followed by the analysis and improvement steps, where the six-sigma quality tools such as cause-effect diagram, statistical process control, and substantial analysis of existing system were implemented for root cause identification and reduction in process variation. The process control charts were used for systematic observation and control the process. Utilizing DMAIC methodology, the standard deviation was decreased from 2.17 to 1.69. The process capability index (C p) value was enhanced from 1.65 to 2.95 and the process performance capability index (C pk) value was enhanced from 0.94 to 2.66. A DMAIC methodology was established that can play a key role for reducing defects in the tire-manufacturing process in India.

Optimization of the central automatic control of a small Dutch sewer system

NASA Astrophysics Data System (ADS)

Kolechkina, A. G.; Hoes, O. A. C.

2012-04-01

A sewer control system was developed in the context of a subsidized project aiming at improvement of surface water quality by control of sewer systems and surface water systems. The project was coordinated by the local water board, "Waterschap Hollandse Delta". Other participants were Delft University of Technology, Deltares and the municipalities Strijen, Cromstrijen, Westmaas, Oud Beijerland and Piershil. As part of the project there were two pilot implementations where a central automatic controller was coupled to the existing SCADA system. For these two pilots the system is now operational. A Dutch urban area in the western part of the Netherlands is usually part of a polder, which is effectively an artificially drained catchment. The urban area itself is split into small subcatchments that manage runoff in different ways. In all cases a large fraction goes into the natural hydrological cycle, but, depending on the design of the local sewer system, a larger or smaller part finds its way into the sewer system. Proper control of this flow is necessary to control surface water quality and to avoid health risks from flow from the sewer into the streets. At each time step the controller switches pumps to distribute the remaining water in the system at the end of the time step over the different subcatchments. The distribution is created based on expert judgment of the relative vulnerability and subcatchment sewer system water quality. It is implemented in terms curves of total system stored volume versus subcatchment stored volume. We describe the process of the adaptation of a controller to two different sewer systems and the understanding of the artificial part of the catchment we gained during this process. In the process of adaptation the type of sewer system (combined foul water and storm water transport or separate foul water and storm water transport) played a major role.

Cost-effectiveness of a stepped-care intervention to prevent major depression in patients with type 2 diabetes mellitus and/or coronary heart disease and subthreshold depression: design of a cluster-randomized controlled trial.

PubMed

van Dijk, Susan E M; Pols, Alide D; Adriaanse, Marcel C; Bosmans, Judith E; Elders, Petra J M; van Marwijk, Harm W J; van Tulder, Maurits W

2013-05-07

Co-morbid major depression is a significant problem among patients with type 2 diabetes mellitus and/or coronary heart disease and this negatively impacts quality of life. Subthreshold depression is the most important risk factor for the development of major depression. Given the highly significant association between depression and adverse health outcomes and the limited capacity for depression treatment in primary care, there is an urgent need for interventions that successfully prevent the transition from subthreshold depression into a major depressive disorder. Nurse led stepped-care is a promising way to accomplish this. The aim of this study is to evaluate the cost-effectiveness of a nurse-led indicated stepped-care program to prevent major depression among patients with type 2 diabetes mellitus and/or coronary heart disease in primary care who also have subthreshold depressive symptoms. An economic evaluation will be conducted alongside a cluster-randomized controlled trial in approximately thirty general practices in the Netherlands. Randomization takes place at the level of participating practice nurses. We aim to include 236 participants who will either receive a nurse-led indicated stepped-care program for depressive symptoms or care as usual. The stepped-care program consists of four sequential but flexible treatment steps: 1) watchful waiting, 2) guided self-help treatment, 3) problem solving treatment and 4) referral to the general practitioner. The primary clinical outcome measure is the cumulative incidence of major depressive disorder as measured with the Mini International Neuropsychiatric Interview. Secondary outcomes include severity of depressive symptoms, quality of life, anxiety and physical outcomes. Costs will be measured from a societal perspective and include health care utilization, medication and lost productivity costs. Measurements will be performed at baseline and 3, 6, 9 and 12 months. The intervention being investigated is expected to prevent new cases of depression among people with type 2 diabetes mellitus and/or coronary heart disease and subthreshold depression, with subsequent beneficial effects on quality of life, clinical outcomes and health care costs. When proven cost-effective, the program provides a viable treatment option in the Dutch primary care system. Dutch Trial Register NTR3715.

Temperature management during semen processing: Impact on boar sperm quality under laboratory and field conditions.

PubMed

Schulze, M; Henning, H; Rüdiger, K; Wallner, U; Waberski, D

2013-12-01

Freshly collected boar spermatozoa are sensitive to a fast reduction in temperature because of lipid phase transition and phase separation processes. Temperature management during semen processing may determine the quality of stored samples. The aim of this study was to evaluate the influence of isothermic and hypothermic semen processing protocols on boar sperm quality under laboratory and field conditions. In the laboratory study, ejaculates (n = 12) were first diluted (1:1) with Beltsville Thawing Solution (BTS) at 32 °C, then processed either with isothermic (32 °C) or hypothermic (21 °C) BTS, stored at 17 °C, and assessed on days 1, 3, and 6. Temperature curves showed that 150 minutes after the first dilution, semen doses of both groups reached the same temperature. Two-step hypothermic processing resulted in lower sperm motility on days 1 and 6 (P < 0.05). Concomitantly, hypothermally processed samples contained less membrane intact sperm on days 3 and 6 (P < 0.05). Using AndroStar Plus extender instead of BTS reduced the negative effect of hypothermic processing. In the field study, 15 semen samples from each of 23 European artificial insemination studs were evaluated as part of an external quality control program. Semen quality based on motility, membrane integrity, mitochondrial activity, and a thermoresistance test was higher for stations using one-step isothermic dilutions (n = 7) compared with artificial insemination centers using two-step hypothermic protocols (n = 16). Both studies show that chilling injury associated with hypothermic dilution results in lower quality of stored boar semen compared with isothermic dilution and that the type of semen extender affects the outcomes. Copyright © 2013 Elsevier Inc. All rights reserved.

GMP-based CD133+ cells isolation maintains progenitor angiogenic properties and enhances standardization in cardiovascular cell therapy

PubMed Central

Gaipa, Giuseppe; Tilenni, Manuela; Straino, Stefania; Burba, Ilaria; Zaccagnini, Germana; Belotti, Daniela; Biagi, Ettore; Valentini, Marco; Perseghin, Paolo; Parma, Matteo; Campli, Cristiana Di; Biondi, Andrea; Capogrossi, Maurizio C; Pompilio, Giulio; Pesce, Maurizio

2010-01-01

Abstract The aim of the present study was to develop and validate a good manufacturing practice (GMP) compliant procedure for the preparation of bone marrow (BM) derived CD133+ cells for cardiovascular repair. Starting from available laboratory protocols to purify CD133+ cells from human cord blood, we implemented these procedures in a GMP facility and applied quality control conditions defining purity, microbiological safety and vitality of CD133+ cells. Validation of CD133+ cells isolation and release process were performed according to a two-step experimental program comprising release quality checking (step 1) as well as ‘proofs of principle’ of their phenotypic integrity and biological function (step 2). This testing program was accomplished using in vitro culture assays and in vivo testing in an immunosuppressed mouse model of hindlimb ischemia. These criteria and procedures were successfully applied to GMP production of CD133+ cells from the BM for an ongoing clinical trial of autologous stem cells administration into patients with ischemic cardiomyopathy. Our results show that GMP implementation of currently available protocols for CD133+ cells selection is feasible and reproducible, and enables the production of cells having a full biological potential according to the most recent quality requirements by European Regulatory Agencies. PMID:19627397

A Comprehensive Planning Model and Delivery System for Leadership Training Programs.

ERIC Educational Resources Information Center

Janosik, Steven M.; Sina, Julie A.

1988-01-01

Presents an eight-step planning model that operationally defines a comprehensive delivery systems approach to campuswide leadership training. Lists four goals of the model: to increase efficiency of leadership training through shared resources, to decrease costs, to provide quality control, and to increase impact of programming effort by creating…

Biomimetic synthesis and antiproliferative properties of racemic natural(-) and unnnatural(+) glyceollin I

USDA-ARS?s Scientific Manuscript database

A 14-step biomimetic synthetic route to glyceollin I in ca. 1.5% overall yield has been developed. In addition to being useful for the elaboration of analogs that can contribute to SAR, this route provides practical access to analytical standards that may be used for quality control purposes when gl...

16 CFR 1115.13 - Content and form of reports; delegations of authority.

Code of Federal Regulations, 2010 CFR

2010-01-01

... (or a summary thereof) shall be attached. Give a chronological account of facts or events leading to... changes (e.g., designs, adjustments, and additional parts, quality control, testing) that have been or... such changes and steps. (11) Information that has been or will be given to purchasers, including...

RNA Surveillance: Molecular Approaches in Transcript Quality Control and their Implications in Clinical Diseases

PubMed Central

Moraes, Karen CM

2010-01-01

Production of mature mRNAs that encode functional proteins involves highly complex pathways of synthesis, processing and surveillance. At numerous steps during the maturation process, the mRNA transcript undergoes scrutiny by cellular quality control machinery. This extensive RNA surveillance ensures that only correctly processed mature mRNAs are translated and precludes production of aberrant transcripts that could encode mutant or possibly deleterious proteins. Recent advances in elucidating the molecular mechanisms of mRNA processing have demonstrated the existence of an integrated network of events, and have revealed that a variety of human diseases are caused by disturbances in the well-coordinated molecular equilibrium of these events. From a medical perspective, both loss and gain of function are relevant, and a considerable number of different diseases exemplify the importance of the mechanistic function of RNA surveillance in a cell. Here, mechanistic hallmarks of mRNA processing steps are reviewed, highlighting the medical relevance of their deregulation and how the understanding of such mechanisms can contribute to the development of therapeutic strategies. PMID:19829759

Analysis of ChIP-seq Data in R/Bioconductor.

PubMed

de Santiago, Ines; Carroll, Thomas

2018-01-01

The development of novel high-throughput sequencing methods for ChIP (chromatin immunoprecipitation) has provided a very powerful tool to study gene regulation in multiple conditions at unprecedented resolution and scale. Proactive quality-control and appropriate data analysis techniques are of critical importance to extract the most meaningful results from the data. Over the last years, an array of R/Bioconductor tools has been developed allowing researchers to process and analyze ChIP-seq data. This chapter provides an overview of the methods available to analyze ChIP-seq data based primarily on software packages from the open-source Bioconductor project. Protocols described in this chapter cover basic steps including data alignment, peak calling, quality control and data visualization, as well as more complex methods such as the identification of differentially bound regions and functional analyses to annotate regulatory regions. The steps in the data analysis process were demonstrated on publicly available data sets and will serve as a demonstration of the computational procedures routinely used for the analysis of ChIP-seq data in R/Bioconductor, from which readers can construct their own analysis pipelines.

Process performance and product quality in an integrated continuous antibody production process.

PubMed

Karst, Daniel J; Steinebach, Fabian; Soos, Miroslav; Morbidelli, Massimo

2017-02-01

Continuous manufacturing is currently being seriously considered in the biopharmaceutical industry as the possible new paradigm for producing therapeutic proteins, due to production cost and product quality related benefits. In this study, a monoclonal antibody producing CHO cell line was cultured in perfusion mode and connected to a continuous affinity capture step. The reliable and stable integration of the two systems was enabled by suitable control loops, regulating the continuous volumetric flow and adapting the operating conditions of the capture process. For the latter, an at-line HPLC measurement of the harvest concentration subsequent to the bioreactor was combined with a mechanistic model of the capture chromatographic unit. Thereby, optimal buffer consumption and productivity throughout the process was realized while always maintaining a yield above the target value of 99%. Stable operation was achieved at three consecutive viable cell density set points (20, 60, and 40 × 10 6 cells/mL), together with consistent product quality in terms of aggregates, fragments, charge isoforms, and N-linked glycosylation. In addition, different values for these product quality attributes such as N-linked glycosylation, charge variants, and aggregate content were measured at the different steady states. As expected, the amount of released DNA and HCP was significantly reduced by the capture step for all considered upstream operating conditions. This study is exemplary for the potential of enhancing product quality control and modulation by integrated continuous manufacturing. Biotechnol. Bioeng. 2017;114: 298-307. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Optimal molecular profiling of tissue and tissue components: defining the best processing and microdissection methods for biomedical applications.

PubMed

Bova, G Steven; Eltoum, Isam A; Kiernan, John A; Siegal, Gene P; Frost, Andra R; Best, Carolyn J M; Gillespie, John W; Emmert-Buck, Michael R

2005-01-01

Isolation of well-preserved pure cell populations is a prerequisite for sound studies of the molecular basis of pancreatic malignancy and other biological phenomena. This chapter reviews current methods for obtaining anatomically specific signals from molecules isolated from tissues, a basic requirement for productive linking of phenotype and genotype. The quality of samples isolated from tissue and used for molecular analysis is often glossed-over or omitted from publications, making interpretation and replication of data difficult or impossible. Fortunately, recently developed techniques allow life scientists to better document and control the quality of samples used for a given assay, creating a foundation for improvement in this area. Tissue processing for molecular studies usually involves some or all of the following steps: tissue collection, gross dissection/identification, fixation, processing/embedding, storage/archiving, sectioning, staining, microdissection/annotation, and pure analyte labeling/identification. High-quality tissue microdissection does not necessarily mean high-quality samples to analyze. The quality of biomaterials obtained for analysis is highly dependent on steps upstream and downstream from tissue microdissection. We provide protocols for each of these steps, and encourage you to improve upon these. It is worth the effort of every laboratory to optimize and document its technique at each stage of the process, and we provide a starting point for those willing to spend the time to optimize. In our view, poor documentation of tissue and cell type of origin and the use of nonoptimized protocols is a source of inefficiency in current life science research. Even incremental improvement in this area will increase productivity significantly.

Five Steps to Successfully Implement and Evaluate Propensity Score Matching in Clinical Research Studies.

PubMed

Staffa, Steven J; Zurakowski, David

2018-01-09

In clinical research, the gold standard level of evidence is the randomized controlled trial (RCT). The availability of nonrandomized retrospective data is growing; however, a primary concern of analyzing such data is comparability of the treatment groups with respect to confounding variables. Propensity score matching (PSM) aims to equate treatment groups with respect to measured baseline covariates to achieve a comparison with reduced selection bias. It is a valuable statistical methodology that mimics the RCT, and it may create an "apples to apples" comparison while reducing bias due to confounding. PSM can improve the quality of anesthesia research and broaden the range of research opportunities. PSM is not necessarily a magic bullet for poor-quality data, but rather may allow the researcher to achieve balanced treatment groups similar to a RCT when high-quality observational data are available. PSM may be more appealing than the common approach of including confounders in a regression model because it allows for a more intuitive analysis of a treatment effect between 2 comparable groups.We present 5 steps that anesthesiologists can use to successfully implement PSM in their research with an example from the 2015 Pediatric National Surgical Quality Improvement Program: a validated, annually updated surgery and anesthesia pediatric database. The first step of PSM is to identify its feasibility with regard to the data at hand and ensure availability of data on any potential confounders. The second step is to obtain the set of propensity scores from a logistic regression model with treatment group as the outcome and the balancing factors as predictors. The third step is to match patients in the 2 treatment groups with similar propensity scores, balancing all factors. The fourth step is to assess the success of the matching with balance diagnostics, graphically or analytically. The fifth step is to apply appropriate statistical methodology using the propensity-matched data to compare outcomes among treatment groups.PSM is becoming an increasingly more popular statistical methodology in medical research. It often allows for improved evaluation of a treatment effect that may otherwise be invalid due to a lack of balance between the 2 treatment groups with regard to confounding variables. PSM may increase the level of evidence of a study and in turn increases the strength and generalizability of its results. Our step-by-step approach provides a useful strategy for anesthesiologists to implement PSM in their future research.

Vertical Stability of Ephemeral Step-Pool Streams Largely Controlled By Tree Roots, Central Kentucky, USA

NASA Astrophysics Data System (ADS)

Macmannis, K. R.; Hawley, R. J.

2013-12-01

The mechanisms controlling stability on small streams in steep settings are not well documented but have many implications related to stream integrity and water quality. For example, channel instability on first and second order streams is a potential source of sediment in regulated areas with Total Maximum Daily Loads (TMDLs) on water bodies that are impaired for sedimentation, such as the Chesapeake Bay. Management strategies that preserve stream integrity and protect channel stability are critical to communities that may otherwise require large capital investments to meet TMDLs and other water quality criteria. To contribute to an improved understanding of ephemeral step-pool systems, we collected detailed hydrogeomorphic data on 4 steep (0.06 - 0.12 meter/meter) headwater streams draining to lower relief alluvial valleys in Spencer County, Kentucky, USA. The step-pool streams (mean step height of 0.47 meter, mean step spacing of 4 meters) drained small undeveloped catchments dominated by early successional forest. Data collection for each of the 4 streams included 2 to 3 cross section surveys, bed material particle counts at cross section locations, and profile surveys ranging from approximately 125 to 225 meters in length. All survey data was systematically processed to understand geometric parameters such as cross sectional area, depth, and top width; bed material gradations; and detailed profile measurements such as slope, pool and riffle lengths, pool spacing, pool depth, step height, and step length. We documented the location, frequency, and type of step-forming materials (i.e., large woody debris (LWD), rock, and tree roots), compiling a database of approximately 130 total steps. Lastly, we recorded a detailed tree assessment of all trees located within 2 meters of the top of bank, detailing the species of tree, trunk diameter, and approximate distance from the top of bank. Analysis of geometric parameters illustrated correlations between channel characteristics (e.g., step height was positively correlated to slope while pool spacing was inversely correlated to slope). Most importantly, we assessed the step-forming materials with respect to channel stability. LWD has been widely documented as an important component of geomorphic stability and habitat diversity across many settings; however, our research highlights the importance of roots in providing bed stability in steep, first and second-order ephemeral streams, as 40 percent of the steps in these step-pool systems were controlled by tree roots. Similar to the key member in naturally-occurring log jams, lateral tree roots frequently served as the anchor for channel steps that were often supplemented by rocks or LWD. Assessment of the trees throughout the riparian zone suggested average tree densities of 0.30 trees/square meter or 0.40 trees/meter could provide adequate riparian zone coverage to promote channel stability. These results have implications to land use planning and stormwater management. For example, on developments draining to step-pool systems, maintaining the integrity of the riparian zone would seem to be as important as ensuring hydrologic mimicry if channel integrity is to be preserved.

Integrating anthropogenic hazard data to facilitate research related to the exploitation of geo-resources

NASA Astrophysics Data System (ADS)

Kwiatek, Grzegorz; Blanke, Aglaja; Olszewska, Dorota; Orlecka-Sikora, Beata; Lasocki, Stanisław; Kozlovskaya, Elena; Nevalainen, Jouni; Schmittbuhl, Jean; Grasso, Jean-Robert; Schaming, Marc; Bigarre, Pascal; Kinscher, Jannes-Lennart; Saccorotti, Gilberto; Garcia, Alexander; Cassidy, Nigel; Toon, Sam; Mutke, Grzegorz; Sterzel, Mariusz; Szepieniec, Tomasz

2017-04-01

The Thematic Core Service "Anthropogenic Hazards" (TCS AH) integrates data and provides various data services in a form of complete e-research infrastructure for advanced analysis and geophysical modelling of anthropogenic hazard due to georesources exploitation. TCS AH is based on the prototype built in the framework of the IS-EPOS project POIG.02.03.00-14-090/13-00 (https://tcs.ah-epos.eu/). The TCS AH is currently being further developed within EPOS Implementation phase (H2020-INFRADEV-1-2015-1, INFRADEV-3-2015). The TCS AH aims to have a measurable impact on innovative research and development by providing a comprehensive, wide-scale and high quality research infrastructure available to the scientific community, industrial partners and public. One of the main deliverable of TCS AH is the access to numerous induced seismicity datasets called "episodes". The episode is defined as a comprehensive set of data describing the geophysical process induced or triggered by technological activity, which under certain circumstances can become hazardous for people, infrastructure and the environment. The episode is a time-correlated, standardized collection of geophysical, technological and other relevant geodata forming complete documentation of seismogenic process. In addition to the 6 episodes already implemented during previous phase of integration, and 3 episodes integrated within SHEER project, at least 18 new episodes related to conventional hydrocarbon extraction, reservoir treatment, underground mining and geothermal energy production are currently being integrated into the TCS AH. The heterogeneous multi-disciplinary data from different episodes are subjected to an extensive quality control (QC) procedure composed of five steps and involving the collaborative work of data providers, quality control team, IT team, that is being supervised by the quality control manager with the aid of Redmine platform. The first three steps of QC are performed at local data center and include the (1) transfer of episode data to the local data center, (2) data standardization and validation of formats, (3) metadata preparation according to TCS AH metadata scheme. The final two steps of QC are performed already at the level of TCS AH website and include (4) Contextual analysis of data quality followed by appearance of episode in TCS AH maintenance area, and finally the (5) Episode publication at TCS AH website.

Mississippi Quality Step System: QRS Profile. The Child Care Quality Rating System (QRS)Assessment

ERIC Educational Resources Information Center

Child Trends, 2010

2010-01-01

This paper presents a profile of Mississippi's Quality Step System prepared as part of the Child Care Quality Rating System (QRS) Assessment Study. The profile consists of several sections and their corresponding descriptions including: (1) Program Information; (2) Rating Details; (3) Quality Indicators for Center-Based Programs; (4) Application…

Infrared Thermography As Quality Control For Foamed In-Place Insulation

NASA Astrophysics Data System (ADS)

Schwartz, Joel A.

1989-03-01

Since November of 1985, FOAM-TECH, INC. has been utilizing an I.S.I. Model 91 Videotherm Camera to quality control the installation of foamed in-place polyurethane and polyisocyanurate insulation. Monitoring the injection of foam into the walls and roofs of new construction and during the the retrofitting of older buildings has become an integral and routine step in daily operations. The Videotherm is also used to monitor the injection of foam into hot water tanks, trailer bodies for refrigeration trucks, and pontoons and buoys for flotation. The camera is also used for the detection of heat loss and air infiltration for conventionally insulated buildings. Appendix A are thermograms of foamed in-place insulation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Osmanlioglu, Ahmet Erdal

Pre-treatment of radioactive waste is the first step in waste management program that occurs after waste generation from various applications in Turkey. Pre-treatment and characterization practices are carried out in Radioactive Waste Management Unit (RWMU) at Cekmece Nuclear Research and Training Center (CNRTC) in Istanbul. This facility has been assigned to take all low-level radioactive wastes generated by nuclear applications in Turkey. The wastes are generated from research and nuclear applications mainly in medicine, biology, agriculture, quality control in metal processing and construction industries. These wastes are classified as low- level radioactive wastes. Pre-treatment practices cover several steps. In thismore » paper, main steps of pre-treatment and characterization are presented. Basically these are; collection, segregation, chemical adjustment, size reduction and decontamination operations. (author)« less

New quality-control materials for the determination of alkylphenols and alkylphenol ethoxylates in sewage sludge.

PubMed

Fernández-Sanjuan, María; Lacorte, Silvia; Rigol, Anna; Sahuquillo, Angels

2012-11-01

The determination of alkylphenols in sewage sludge is still hindered by the complexity of the matrix and of the analytes, some of which are a mixture of isomers. Most of the methods published in the literature have not been validated, due to the lack of reference materials for the determination of alkylphenols in sludge. Given this situation, the objectives of the present study were to develop a new quality-control material for determining octylphenol, nonylphenol and nonylphenol monoethoxylate in sludge. The material was prepared from an anaerobically digested sewage sludge, which was thermally dried, sieved, homogenized and bottled after checking for the bulk homogeneity of the processed material. Together with the sewage sludge, an extract was also prepared, in order to provide a quality-control material for allowing laboratories to test the measuring step. The homogeneity and 1-year stability of the two materials were evaluated. Statistical analysis proved that the materials were homogeneous and stable for at least 1 year stored at different temperatures. These materials are intended to assist in the quality control of the determination of alkylphenols and alkylphenol ethoxylates in sewage sludge.

Does bone debris in anterior cruciate ligament reconstruction really matter? A cohort study of a protocol for bone debris debridement

PubMed Central

Imam, Mohamed A.; Abdelkafy, Ashraf; Dinah, Feroz; Adhikari, Ajeya

2015-01-01

Background: The purpose of the current study was to determine whether a systematic five-step protocol for debridement and evacuation of bone debris during anterior cruciate ligament reconstruction (ACLR) reduces the presence of such debris on post-operative radiographs. Methods: A five-step protocol for removal of bone debris during arthroscopic assisted ACLR was designed. It was applied to 60 patients undergoing ACLR (Group 1), and high-quality digital radiographs were taken post-operatively in each case to assess for the presence of intra-articular bone debris. A control group of 60 consecutive patients in whom no specific bone debris protocol was applied (Group 2) and their post-operative radiographs were also checked for the presence of intra-articular bone debris. Results: In Group 1, only 15% of post-operative radiographs showed residual bone debris, compared to 69% in Group 2 (p < 0.001). Conclusion: A five-step systematic protocol for bone debris removal during arthroscopic assisted ACLR resulted in a significant decrease in residual bone debris seen on high-quality post-operative radiographs. PMID:27163060

Adaptive guidance and control for future remote sensing systems

NASA Technical Reports Server (NTRS)

Lowrie, J. W.; Myers, J. E.

1980-01-01

A unique approach to onboard processing was developed that is capable of acquiring high quality image data for users in near real time. The approach is divided into two steps: the development of an onboard cloud detection system; and the development of a landmark tracker. The results of these two developments are outlined and the requirements of an operational guidance and control system capable of providing continuous estimation of the sensor boresight position are summarized.

Ohio Step Up to Quality: QRS Profile. The Child Care Quality Rating System (QRS) Assessment

ERIC Educational Resources Information Center

Child Trends, 2010

2010-01-01

This paper presents a profile of Ohio's Step Up to Quality prepared as part of the Child Care Quality Rating System (QRS) Assessment Study. The profile consists of several sections and their corresponding descriptions including: (1) Program Information; (2) Rating Details; (3) Quality Indicators for Center-Based Programs; (4) Indicators for Family…

Effective teaching of manual skills to physiotherapy students: a randomised clinical trial.

PubMed

Rossettini, Giacomo; Rondoni, Angie; Palese, Alvisa; Cecchetto, Simone; Vicentini, Marco; Bettale, Fernanda; Furri, Laura; Testa, Marco

2017-08-01

To date, despite the relevance of manual skills laboratories in physiotherapy education, evidence on the effectiveness of different teaching methods is limited. Peyton's four-step and the 'See one, do one' approaches were compared for their effectiveness in teaching manual skills. A cluster randomised controlled trial was performed among final-year, right-handed physiotherapy students, without prior experience in manual therapy or skills laboratories. The manual technique of C1-C2 passive right rotation was taught by different experienced physiotherapist using Peyton's four-step approach (intervention group) and the 'See one, do one' approach (control group). Participants, teachers and assessors were blinded to the aims of the study. Primary outcomes were quality of performance at the end of the skills laboratories, and after 1 week and 1 month. Secondary outcomes were time required to teach, time required to perform the procedure and student satisfaction. A total of 39 students were included in the study (21 in the intervention group and 18 in the control group). Their main characteristics were homogeneous at baseline. The intervention group showed better quality of performance in the short, medium and long terms (F 1,111  = 35.91, p < 0.001). Both groups demonstrated decreased quality of performance over time (F 2,111  = 12.91, p < 0.001). The intervention group reported significantly greater mean ± standard deviation satisfaction (4.31 ± 1.23) than the control group (4.03 ± 1.31) (p < 0.001). Although there was no significant difference between the two methods in the time required for teaching, the time required by the intervention group to perform the procedure was significantly lower immediately after the skills laboratories and over time (p < 0.001). Peyton's four-step approach is more effective than the 'See one, do one' approach in skills laboratories aimed at developing physiotherapy student competence in C1-C2 passive mobilisation. © 2017 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

Framework for the quality assurance of 'omics technologies considering GLP requirements.

PubMed

Kauffmann, Hans-Martin; Kamp, Hennicke; Fuchs, Regine; Chorley, Brian N; Deferme, Lize; Ebbels, Timothy; Hackermüller, Jörg; Perdichizzi, Stefania; Poole, Alan; Sauer, Ursula G; Tollefsen, Knut E; Tralau, Tewes; Yauk, Carole; van Ravenzwaay, Ben

2017-12-01

'Omics technologies are gaining importance to support regulatory toxicity studies. Prerequisites for performing 'omics studies considering GLP principles were discussed at the European Centre for Ecotoxicology and Toxicology of Chemicals (ECETOC) Workshop Applying 'omics technologies in Chemical Risk Assessment. A GLP environment comprises a standard operating procedure system, proper pre-planning and documentation, and inspections of independent quality assurance staff. To prevent uncontrolled data changes, the raw data obtained in the respective 'omics data recording systems have to be specifically defined. Further requirements include transparent and reproducible data processing steps, and safe data storage and archiving procedures. The software for data recording and processing should be validated, and data changes should be traceable or disabled. GLP-compliant quality assurance of 'omics technologies appears feasible for many GLP requirements. However, challenges include (i) defining, storing, and archiving the raw data; (ii) transparent descriptions of data processing steps; (iii) software validation; and (iv) ensuring complete reproducibility of final results with respect to raw data. Nevertheless, 'omics studies can be supported by quality measures (e.g., GLP principles) to ensure quality control, reproducibility and traceability of experiments. This enables regulators to use 'omics data in a fit-for-purpose context, which enhances their applicability for risk assessment. Copyright © 2017 Elsevier Inc. All rights reserved.

Two-step design method for highly compact three-dimensional freeform optical system for LED surface light source.

PubMed

Mao, Xianglong; Li, Hongtao; Han, Yanjun; Luo, Yi

2014-10-20

Designing an illumination system for a surface light source with a strict compactness requirement is quite challenging, especially for the general three-dimensional (3D) case. In accordance with the two key features of an expected illumination distribution, i.e., a well-controlled boundary and a precise illumination pattern, a two-step design method is proposed in this paper for highly compact 3D freeform illumination systems. In the first step, a target shape scaling strategy is combined with an iterative feedback modification algorithm to generate an optimized freeform optical system with a well-controlled boundary of the target distribution. In the second step, a set of selected radii of the system obtained in the first step are optimized to further improve the illuminating quality within the target region. The method is quite flexible and effective to design highly compact optical systems with almost no restriction on the shape of the desired target field. As examples, three highly compact freeform lenses with ratio of center height h of the lens and the maximum dimension D of the source ≤ 2.5:1 are designed for LED surface light sources to form a uniform illumination distribution on a rectangular, a cross-shaped and a complex cross pierced target plane respectively. High light control efficiency of η > 0.7 as well as low relative standard illumination deviation of RSD < 0.07 is obtained simultaneously for all the three design examples.

Quality control for the first large areas of triple-GEM chambers for the CMS endcaps

NASA Astrophysics Data System (ADS)

Abbaneo, D.; Abbas, M.; Abbrescia, M.; Abi Akl, M.; Aboamer, O.; Acosta, D.; Ahmad, A.; Ahmed, W.; Aleksandrov, A.; Altieri, P.; Asawatangtrakuldee, C.; Aspell, P.; Assran, Y.; Awan, I.; Bally, S.; Ban, Y.; Banerjee, S.; Barashko, V.; Barria, P.; Bencze, G.; Beni, N.; Benussi, L.; Bhopatkar, V.; Bianco, S.; Bos, J.; Bouhali, O.; Braghieri, A.; Braibant, S.; Buontempo, S.; Calabria, C.; Caponero, M.; Caputo, C.; Cassese, F.; Castaneda, A.; Cauwenbergh, S.; Cavallo, F. R.; Celik, A.; Choi, M.; Choi, S.; Christiansen, J.; Cimmino, A.; Colafranceschi, S.; Colaleo, A.; Conde Garcia, A.; Czellar, S.; Dabrowski, M. M.; De Lentdecker, G.; De Oliveira, R.; de Robertis, G.; Dildick, S.; Dorney, B.; Endroczi, G.; Errico, F.; Fenyvesi, A.; Ferry, S.; Furic, I.; Giacomelli, P.; Gilmore, J.; Golovtsov, V.; Guiducci, L.; Guilloux, F.; Gutierrez, A.; Hadjiiska, R. M.; Hauser, J.; Hoepfner, K.; Hohlmann, M.; Hoorani, H.; Iaydjiev, P.; Jeng, Y. G.; Kamon, T.; Karchin, P.; Korytov, A.; Krutelyov, S.; Kumar, A.; Kim, H.; Lee, J.; Lenzi, T.; Litov, L.; Loddo, F.; Madorsky, A.; Maerschalk, T.; Maggi, M.; Magnani, A.; Mal, P. K.; Mandal, K.; Marchioro, A.; Marinov, A.; Majumdar, N.; Merlin, J. A.; Mitselmakher, G.; Mohanty, A. K.; Mohapatra, A.; Molnar, J.; Muhammad, S.; Mukhopadhyay, S.; Naimuddin, M.; Nuzzo, S.; Oliveri, E.; Pant, L. M.; Paolucci, P.; Park, I.; Passeggio, G.; Pavlov, B.; Philipps, B.; Piccolo, D.; Postema, H.; Puig Baranac, A.; Radi, A.; Radogna, R.; Raffone, G.; Ranieri, A.; Rashevski, G.; Riccardi, C.; Rodozov, M.; Rodrigues, A.; Ropelewski, L.; RoyChowdhury, S.; Ryu, G.; Ryu, M. S.; Safonov, A.; Salva, S.; Saviano, G.; Sharma, A.; Sharma, A.; Sharma, R.; Shah, A. H.; Shopova, M.; Sturdy, J.; Sultanov, G.; Swain, S. K.; Szillasi, Z.; Talvitie, J.; Tatarinov, A.; Tuuva, T.; Tytgat, M.; Vai, I.; Van Stenis, M.; Venditti, R.; Verhagen, E.; Verwilligen, P.; Vitulo, P.; Volkov, S.; Vorobyev, A.; Wang, D.; Wang, M.; Yang, U.; Yang, Y.; Yonamine, R.; Zaganidis, N.; Zenoni, F.; Zhang, A.

2018-02-01

The CMS Collaboration plans to equip the very forward muon system with triple-GEM detectors that can withstand the environment of the High-Luminosity LHC. This project is at the final stages of R&D and moving to production. An unprecedented large area of several 100 m2 are to be instrumented with GEM detectors which will be produced in six different sites around the world. A common construction and quality control procedure is required to ensure the performance of each detector. The quality control steps will include optical inspection, cleaning and baking of all materials and parts used to build the detector, leakage current tests of the GEM foils, high voltage tests, gas leak tests of the chambers and monitoring pressure drop vs. time, gain calibration to know the optimal operation region of the detector, gain uniformity tests, and studying the efficiency, noise and tracking performance of the detectors in a cosmic stand using scintillators.

Physical activity coaching by Australian Exercise Physiologists is cost effective for patients referred from general practice.

PubMed

Ewald, Ben; Stacey, Fiona; Johnson, Natalie; Plotnikoff, Ronald C; Holliday, Elizabeth; Brown, Wendy; James, Erica L

2018-02-01

Interventions to promote physical activity for sedentary patients seen in general practice may be a way to reduce the burden of chronic disease. Coaching by an exercise physiologist is publicly funded in Australia, but cost effectiveness has not been documented. In a three-arm randomised controlled trial, face-to-face coaching and telephone coaching over 12 weeks were compared with a control group using the outcome of step count for one week at baseline, three months and twelve months. Program costs and time-based costs were considered. Quality of life was measured as a secondary outcome. At 12 months, the intervention groups were more active than controls by 1,002 steps per day (95%CI 244, 1,759). This was achieved at a cost of AUD$245 per person. There was no change in reported quality of life or utility values. Coaching achieved a modest increase in activity equivalent to 10 minutes walking per day, at a cost of AUD$245 per person. Face-to-face and telephone counselling were both effective. Implication for public health: Persistence of increases nine months after the end of coaching suggests it creates long-term change and is a good value health intervention. © 2017 The Authors.

Color management systems: methods and technologies for increased image quality

NASA Astrophysics Data System (ADS)

Caretti, Maria

1997-02-01

All the steps in the imaging chain -- from handling the originals in the prepress to outputting them on any device - - have to be well calibrated and adjusted to each other, in order to reproduce color images in a desktop environment as accurate as possible according to the original. Today most of the steps in the prepress production are digital and therefore it is realistic to believe that the color reproduction can be well controlled. This is true thanks to the last years development of fast, cost effective scanners, digital sources and digital proofing devices not the least. It is likely to believe that well defined tools and methods to control this imaging flow will lead to large cost and time savings as well as increased overall image quality. Until now, there has been a lack of good, reliable, easy-to- use systems (e.g. hardware, software, documentation, training and support) in an extent that has made them accessible to the large group of users of graphic arts production systems. This paper provides an overview of the existing solutions to manage colors in a digital pre-press environment. Their benefits and limitations are discussed as well as how they affect the production workflow and organization. The difference between a color controlled environment and one that is not is explained.

Empirical evaluation of humpback whale telomere length estimates; quality control and factors causing variability in the singleplex and multiplex qPCR methods.

PubMed

Olsen, Morten Tange; Bérubé, Martine; Robbins, Jooke; Palsbøll, Per J

2012-09-06

Telomeres, the protective cap of chromosomes, have emerged as powerful markers of biological age and life history in model and non-model species. The qPCR method for telomere length estimation is one of the most common methods for telomere length estimation, but has received recent critique for being too error-prone and yielding unreliable results. This critique coincides with an increasing awareness of the potentials and limitations of the qPCR technique in general and the proposal of a general set of guidelines (MIQE) for standardization of experimental, analytical, and reporting steps of qPCR. In order to evaluate the utility of the qPCR method for telomere length estimation in non-model species, we carried out four different qPCR assays directed at humpback whale telomeres, and subsequently performed a rigorous quality control to evaluate the performance of each assay. Performance differed substantially among assays and only one assay was found useful for telomere length estimation in humpback whales. The most notable factors causing these inter-assay differences were primer design and choice of using singleplex or multiplex assays. Inferred amplification efficiencies differed by up to 40% depending on assay and quantification method, however this variation only affected telomere length estimates in the worst performing assays. Our results suggest that seemingly well performing qPCR assays may contain biases that will only be detected by extensive quality control. Moreover, we show that the qPCR method for telomere length estimation can be highly precise and accurate, and thus suitable for telomere measurement in non-model species, if effort is devoted to optimization at all experimental and analytical steps. We conclude by highlighting a set of quality controls which may serve for further standardization of the qPCR method for telomere length estimation, and discuss some of the factors that may cause variation in qPCR experiments.

A Process Analytical Technology (PAT) approach to control a new API manufacturing process: development, validation and implementation.

PubMed

Schaefer, Cédric; Clicq, David; Lecomte, Clémence; Merschaert, Alain; Norrant, Edith; Fotiadu, Frédéric

2014-03-01

Pharmaceutical companies are progressively adopting and introducing Process Analytical Technology (PAT) and Quality-by-Design (QbD) concepts promoted by the regulatory agencies, aiming the building of the quality directly into the product by combining thorough scientific understanding and quality risk management. An analytical method based on near infrared (NIR) spectroscopy was developed as a PAT tool to control on-line an API (active pharmaceutical ingredient) manufacturing crystallization step during which the API and residual solvent contents need to be precisely determined to reach the predefined seeding point. An original methodology based on the QbD principles was designed to conduct the development and validation of the NIR method and to ensure that it is fitted for its intended use. On this basis, Partial least squares (PLS) models were developed and optimized using chemometrics methods. The method was fully validated according to the ICH Q2(R1) guideline and using the accuracy profile approach. The dosing ranges were evaluated to 9.0-12.0% w/w for the API and 0.18-1.50% w/w for the residual methanol. As by nature the variability of the sampling method and the reference method are included in the variability obtained for the NIR method during the validation phase, a real-time process monitoring exercise was performed to prove its fit for purpose. The implementation of this in-process control (IPC) method on the industrial plant from the launch of the new API synthesis process will enable automatic control of the final crystallization step in order to ensure a predefined quality level of the API. In addition, several valuable benefits are expected including reduction of the process time, suppression of a rather difficult sampling and tedious off-line analyses. © 2013 Published by Elsevier B.V.

Empirical evaluation of humpback whale telomere length estimates; quality control and factors causing variability in the singleplex and multiplex qPCR methods

PubMed Central

2012-01-01

Background Telomeres, the protective cap of chromosomes, have emerged as powerful markers of biological age and life history in model and non-model species. The qPCR method for telomere length estimation is one of the most common methods for telomere length estimation, but has received recent critique for being too error-prone and yielding unreliable results. This critique coincides with an increasing awareness of the potentials and limitations of the qPCR technique in general and the proposal of a general set of guidelines (MIQE) for standardization of experimental, analytical, and reporting steps of qPCR. In order to evaluate the utility of the qPCR method for telomere length estimation in non-model species, we carried out four different qPCR assays directed at humpback whale telomeres, and subsequently performed a rigorous quality control to evaluate the performance of each assay. Results Performance differed substantially among assays and only one assay was found useful for telomere length estimation in humpback whales. The most notable factors causing these inter-assay differences were primer design and choice of using singleplex or multiplex assays. Inferred amplification efficiencies differed by up to 40% depending on assay and quantification method, however this variation only affected telomere length estimates in the worst performing assays. Conclusion Our results suggest that seemingly well performing qPCR assays may contain biases that will only be detected by extensive quality control. Moreover, we show that the qPCR method for telomere length estimation can be highly precise and accurate, and thus suitable for telomere measurement in non-model species, if effort is devoted to optimization at all experimental and analytical steps. We conclude by highlighting a set of quality controls which may serve for further standardization of the qPCR method for telomere length estimation, and discuss some of the factors that may cause variation in qPCR experiments. PMID:22954451

Climatological Processing of Radar Data for the TRMM Ground Validation Program

NASA Technical Reports Server (NTRS)

Kulie, Mark; Marks, David; Robinson, Michael; Silberstein, David; Wolff, David; Ferrier, Brad; Amitai, Eyal; Fisher, Brad; Wang, Jian-Xin; Augustine, David;

Performance Assessment in CTE: Focusing on the Cognitive, Psychomotor ...and Affective Domains

ERIC Educational Resources Information Center

Washer, Bart; Cochran, Lori

2012-01-01

When a student is performing in the psychomotor domain, the authors believe the student is also performing in the cognitive domain (sequencing steps, evaluating the situation) and in the affective domain (appreciating a job well done, quality control, safety). As Dabney Doty, former instructor at the University of Central Missouri, stated, "There…

77 FR 3681 - Approval and Promulgation of Air Quality Implementation Plans; Minnesota; Regional Haze

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-25

... approach in the BART Guidelines in making a BART determination for a fossil fuel-fired EGU with total... ammonia (NH 3 ), and volatile organic compound (VOCs). Fine particle precursors react in the atmosphere to... standards, low sulfur fuel, and non-road mobile source control programs. The fourth step is to determine...

Clinical Decision Support System to Enhance Quality Control of Spirometry Using Information and Communication Technologies

PubMed Central

2014-01-01

Background We recently demonstrated that quality of spirometry in primary care could markedly improve with remote offline support from specialized professionals. It is hypothesized that implementation of automatic online assessment of quality of spirometry using information and communication technologies may significantly enhance the potential for extensive deployment of a high quality spirometry program in integrated care settings. Objective The objective of the study was to elaborate and validate a Clinical Decision Support System (CDSS) for automatic online quality assessment of spirometry. Methods The CDSS was done through a three step process including: (1) identification of optimal sampling frequency; (2) iterations to build-up an initial version using the 24 standard spirometry curves recommended by the American Thoracic Society; and (3) iterations to refine the CDSS using 270 curves from 90 patients. In each of these steps the results were checked against one expert. Finally, 778 spirometry curves from 291 patients were analyzed for validation purposes. Results The CDSS generated appropriate online classification and certification in 685/778 (88.1%) of spirometry testing, with 96% sensitivity and 95% specificity. Conclusions Consequently, only 93/778 (11.9%) of spirometry testing required offline remote classification by an expert, indicating a potential positive role of the CDSS in the deployment of a high quality spirometry program in an integrated care setting. PMID:25600957

A training approach to improve stepping automaticity while dual-tasking in Parkinson's disease: A prospective pilot study.

PubMed

Chomiak, Taylor; Watts, Alexander; Meyer, Nicole; Pereira, Fernando V; Hu, Bin

2017-02-01

Deficits in motor movement automaticity in Parkinson's disease (PD), especially during multitasking, are early and consistent hallmarks of cognitive function decline, which increases fall risk and reduces quality of life. This study aimed to test the feasibility and potential efficacy of a wearable sensor-enabled technological platform designed for an in-home music-contingent stepping-in-place (SIP) training program to improve step automaticity during dual-tasking (DT). This was a 4-week prospective intervention pilot study. The intervention uses a sensor system and algorithm that runs off the iPod Touch which calculates step height (SH) in real-time. These measurements were then used to trigger auditory (treatment group, music; control group, radio podcast) playback in real-time through wireless headphones upon maintenance of repeated large amplitude stepping. With small steps or shuffling, auditory playback stops, thus allowing participants to use anticipatory motor control to regain positive feedback. Eleven participants were recruited from an ongoing trial (Trial Number: ISRCTN06023392). Fear of falling (FES-I), general cognitive functioning (MoCA), self-reported freezing of gait (FOG-Q), and DT step automaticity were evaluated. While we found no significant effect of training on FES-I, MoCA, or FOG-Q, we did observe a significant group (music vs podcast) by training interaction in DT step automaticity (P<0.01). Wearable device technology can be used to enable musically-contingent SIP training to increase motor automaticity for people living with PD. The training approach described here can be implemented at home to meet the growing demand for self-management of symptoms by patients.

Designing a Clinical Data Warehouse Architecture to Support Quality Improvement Initiatives.

PubMed

Chelico, John D; Wilcox, Adam B; Vawdrey, David K; Kuperman, Gilad J

2016-01-01

Clinical data warehouses, initially directed towards clinical research or financial analyses, are evolving to support quality improvement efforts, and must now address the quality improvement life cycle. In addition, data that are needed for quality improvement often do not reside in a single database, requiring easier methods to query data across multiple disparate sources. We created a virtual data warehouse at NewYork Presbyterian Hospital that allowed us to bring together data from several source systems throughout the organization. We also created a framework to match the maturity of a data request in the quality improvement life cycle to proper tools needed for each request. As projects progress in the Define, Measure, Analyze, Improve, Control stages of quality improvement, there is a proper matching of resources the data needs at each step. We describe the analysis and design creating a robust model for applying clinical data warehousing to quality improvement.

Designing a Clinical Data Warehouse Architecture to Support Quality Improvement Initiatives

PubMed Central

Chelico, John D.; Wilcox, Adam B.; Vawdrey, David K.; Kuperman, Gilad J.

2016-01-01

Clinical data warehouses, initially directed towards clinical research or financial analyses, are evolving to support quality improvement efforts, and must now address the quality improvement life cycle. In addition, data that are needed for quality improvement often do not reside in a single database, requiring easier methods to query data across multiple disparate sources. We created a virtual data warehouse at NewYork Presbyterian Hospital that allowed us to bring together data from several source systems throughout the organization. We also created a framework to match the maturity of a data request in the quality improvement life cycle to proper tools needed for each request. As projects progress in the Define, Measure, Analyze, Improve, Control stages of quality improvement, there is a proper matching of resources the data needs at each step. We describe the analysis and design creating a robust model for applying clinical data warehousing to quality improvement. PMID:28269833

Steps toward improving diet and exercise for cancer survivors (STRIDE): a quasi-randomised controlled trial protocol.

PubMed

Frensham, Lauren J; Zarnowiecki, Dorota M; Parfitt, Gaynor; Stanley, Rebecca M; Dollman, James

2014-06-13

Cancer survivorship rates have increased in developed countries largely due to population ageing and improvements in cancer care. Survivorship is a neglected phase of cancer treatment and is often associated with adverse physical and psychological effects. There is a need for broadly accessible, non-pharmacological measures that may prolong disease-free survival, reduce or alleviate co-morbidities and enhance quality of life. The aim of the Steps TowaRd Improving Diet and Exercise (STRIDE) study is to evaluate the effectiveness of an online-delivered physical activity intervention for increasing walking in cancer survivors living in metropolitan and rural areas of South Australia. This is a quasi-randomised controlled trial. The intervention period is 12-weeks with 3-month follow-up. The trial will be conducted at a university setting and community health services in South Australia. Participants will be insufficiently active and aged 18 years or older. Participants will be randomly assigned to either the intervention or control group. All participants will receive a pedometer but only the intervention group will have access to the STRIDE website where they will report steps, affect and ratings of perceived exertion (RPE) during exercise daily. Researchers will use these variables to individualise weekly step goals to increase walking.The primary outcome measure is steps per day. The secondary outcomes are a) health measures (anthropometric and physiological), b) dietary habits (consumption of core foods and non-core foods) and c) quality of life (QOL) including physical, psychological and social wellbeing. Measures will be collected at baseline, post-intervention and 3-month follow-up. This protocol describes the implementation of a trial using an online resource to assist cancer survivors to become more physically active. It is an innovative tool that uses ratings of perceived exertion and daily affect to create individualised step goals for cancer survivors. The research findings may be of relevance to public health policy makers as an efficacious and inexpensive online-delivered intervention can have widespread application and may improve physical and psychological outcomes among this vulnerable population. Findings may indicate directions for the implementation of future physical activity interventions with this population. Australian New Zealand Clinical Trials Registry: ACTRN12613000473763.

Fox Valley Technical College Quality First Process Model.

ERIC Educational Resources Information Center

Fox Valley Technical Coll., Appleton, WI.

An overview is provided of the Quality First Process Model developed by Fox Valley Technical College (FVTC), Wisconsin, to provide guidelines for quality instruction and service consistent with the highest educational standards. The 16-step model involves activities that should be adaptable to any organization. The steps of the quality model are…

[Effects of a dance therapy programme on quality of life, sleep and blood pressure in middle-aged women: A randomised controlled trial].

PubMed

Serrano-Guzmán, María; Valenza-Peña, Carmen M; Serrano-Guzmán, Carmen; Aguilar-Ferrándiz, Encarnación; Valenza-Demet, Gerald; Villaverde-Gutiérrez, Carmen

2016-10-21

Evidence suggests that dance therapy may have positive effects in areas such as cardiovascular parameters and sleep. The aim of the present study is to explore whether a dance therapy programme improves sleep and blood pressure in a population of middle-aged pre-hypertensive and hypertensive women. A randomised controlled trial was conducted, in which participants were assigned to one of 2 groups: standard care (with usual activities and medication) or dance therapy (in which the participants followed a dance therapy programme, in addition to their medication). The intervention was an 8-week, 3-times-per-week, progressive and specific group dance-training programme. The dance steps were specifically designed to improve balance by shifting the body and relocating the centre of gravity. The main measures obtained were blood pressure, sleep quality and quality of life, measured by the Pittsburgh Sleep Quality Index and the European Quality of Life Questionnaire. Sixty-seven pre-hypertensive and hypertensive middle-aged women were randomised to either an intervention group (n=35) or a control group (n=32) after baseline testing. The intervention group reported a significant improvement in blood pressure values (P<.01), as well as in sleep quality (P<.05) and quality of life (P<.001), compared to the control group. The dance therapy programme improved blood pressure, sleep and quality of life in pre-hypertensive and hypertensive middle-aged women, and constitutes an interesting basis for larger-scale research. Copyright © 2016 Elsevier España, S.L.U. All rights reserved.

Improving Malaysian cocoa quality through the use of dehumidified air under mild drying conditions.

PubMed

Hii, Ching L; Law, Chung L; Cloke, Michael; Sharif, Suzannah

2011-01-30

Various studies have been conducted in the past to improve the quality of Malaysian cocoa beans. However, the processing methods still remain crude and lack technological advancement. In terms of drying, no previous study has attempted to apply advanced drying technology to improve bean quality. This paper presents the first attempt to improve the quality of cocoa beans through heat pump drying using constant air (28.6 and 40.4 °C) and stepwise (step-up 30.7-43.6-56.9 °C and step-down 54.9-43.9 °C) drying profiles. Comparison was made against hot air drying at 55.9 °C. Product quality assessment showed significant improvement in the quality of Malaysian cocoa beans. Quality was found to be better in terms of lower acidity (higher pH) and higher degree of browning (cut test) for cocoa beans dried using the step-up profile. All heat pump-dried samples showed flavour quality comparable to that of Ghanaian and better than that of Malaysian and Indonesian commercial samples. Step-up-dried samples showed the best flavour profile with high level of cocoa flavour, low in sourness and not excessive in bitterness and astringency. Dried cocoa samples from the step-up drying profile showed the best overall quality as compared with commercial samples from Malaysia, Indonesia and Ghana. The improvement of Malaysian cocoa bean quality is thus achievable through heat pump drying. 2010 Society of Chemical Industry.

New approaches for the standardization and validation of a real-time qPCR assay using TaqMan probes for quantification of yellow fever virus on clinical samples with high quality parameters

PubMed Central

Fernandes-Monteiro, Alice G; Trindade, Gisela F; Yamamura, Anna MY; Moreira, Otacilio C; de Paula, Vanessa S; Duarte, Ana Cláudia M; Britto, Constança; Lima, Sheila Maria B

2015-01-01

The development and production of viral vaccines, in general, involve several steps that need the monitoring of viral load throughout the entire process. Applying a 2-step quantitative reverse transcription real time PCR assay (RT-qPCR), viral load can be measured and monitored in a few hours. In this context, the development, standardization and validation of a RT-qPCR test to quickly and efficiently quantify yellow fever virus (YFV) in all stages of vaccine production are extremely important. To serve this purpose we used a plasmid construction containing the NS5 region from 17DD YFV to generate the standard curve and to evaluate parameters such as linearity, precision and specificity against other flavivirus. Furthermore, we defined the limits of detection as 25 copies/reaction, and quantification as 100 copies/reaction for the test. To ensure the quality of the method, reference controls were established in order to avoid false negative results. The qRT-PCR technique based on the use of TaqMan probes herein standardized proved to be effective for determining yellow fever viral load both in vivo and in vitro, thus becoming a very important tool to assure the quality control for vaccine production and evaluation of viremia after vaccination or YF disease. PMID:26011746

The use of step aerobics and the stability ball to improve balance and quality of life in community-dwelling older adults - a randomized exploratory study.

PubMed

Dunsky, Ayelet; Yahalom, Tal; Arnon, Michal; Lidor, Ronnie

2017-07-01

To explore the use of step aerobics (SA) and the stability ball (SB) as tools for balance improvement in community-dwelling older adults. Forty-two women (age: 72.2±5.8 years) who attended a community day center volunteered to participate in the study. Following the first assessment session, 28 women were assigned randomly to one of two experimental groups (the use of either SA or SB). The other 14 participants, who were engaged in a ceramic class, served as the control group. The study design was based on four assessment sessions and eight weeks of intervention. Assessment included four balance tests: Timed Up and Go (TUG), One-Leg Stand, Functional Reach, and the Performance-Oriented Assessment of Mobility (POMA). Quality of life was assessed by the use of the Short Form-36 Health Survey questionnaire. The TUG and POMA intervention improved significantly (d=.83 and d=.95, respectively) following the SA. In addition, general health perception following both the SA and SB interventions improved significantly relative to the control condition (d=.62 and d=.22, respectively). The findings of this study may imply that trainers should consider the inclusion of SA and SB as components of physical activity programs for seniors, aimed at improving balance ability and quality of life. Copyright © 2017 Elsevier B.V. All rights reserved.

New approaches for the standardization and validation of a real-time qPCR assay using TaqMan probes for quantification of yellow fever virus on clinical samples with high quality parameters.

PubMed

Fernandes-Monteiro, Alice G; Trindade, Gisela F; Yamamura, Anna M Y; Moreira, Otacilio C; de Paula, Vanessa S; Duarte, Ana Cláudia M; Britto, Constança; Lima, Sheila Maria B

2015-01-01

The development and production of viral vaccines, in general, involve several steps that need the monitoring of viral load throughout the entire process. Applying a 2-step quantitative reverse transcription real time PCR assay (RT-qPCR), viral load can be measured and monitored in a few hours. In this context, the development, standardization and validation of a RT-qPCR test to quickly and efficiently quantify yellow fever virus (YFV) in all stages of vaccine production are extremely important. To serve this purpose we used a plasmid construction containing the NS5 region from 17DD YFV to generate the standard curve and to evaluate parameters such as linearity, precision and specificity against other flavivirus. Furthermore, we defined the limits of detection as 25 copies/reaction, and quantification as 100 copies/reaction for the test. To ensure the quality of the method, reference controls were established in order to avoid false negative results. The qRT-PCR technique based on the use of TaqMan probes herein standardized proved to be effective for determining yellow fever viral load both in vivo and in vitro, thus becoming a very important tool to assure the quality control for vaccine production and evaluation of viremia after vaccination or YF disease.

Managing Injuries of the Neck Trial (MINT): a randomised controlled trial of treatments for whiplash injuries.

PubMed

Lamb, S E; Williams, M A; Williamson, E M; Gates, S; Withers, E J; Mt-Isa, S; Ashby, D; Castelnuovo, E; Underwood, M; Cooke, M W

2012-01-01

To examine the clinical effectiveness of a stepped care approach over a 12-month period after an acute whiplash injury; to estimate the costs and cost-effectiveness of each strategy including treatments and subsequent health-care costs; and to gain participants' perspective on experiencing whiplash injury, NHS treatment, and recovery within the context of the Managing Injuries of the Neck Trial (MINT). Two linked, pragmatic, randomised controlled trials. In Step 1, emergency departments (EDs) were cluster randomised to usual care advice (UCA) or The Whiplash Book advice (WBA)/active management advice. In Step 2, participants were individually randomised to either a single session of advice from a physiotherapist or a physiotherapy package of up to six sessions. An economic evaluation and qualitative study were run in parallel with the trial. Twelve NHS trusts in England comprising 15 EDs. People who attended EDs with an acute whiplash injury of whiplash-associated disorder grades I-III were eligible for Step 1. People who had attended EDs with whiplash injuries and had persistent symptoms 3 weeks after ED attendance were eligible for Step 2. In Step 1, the control intervention was UCA and the experimental intervention was a psycho-educational intervention (WBA/active management advice). In Step 2 the control treatment was reinforcement of the advice provided in Step 1 and the experimental intervention was a package of up to six physiotherapy treatments. The primary outcome was the Neck Disability Index (NDI), which measures severity and frequency of pain and symptoms, and a range of activities including self-care, driving, reading, sleeping and recreation. Secondary outcomes included the mental and physical health-related quality-of-life (HRQoL) subscales of the Short Form questionnaire-12 items (SF-12) and the number of work days lost. A total of 3851 patients were recruited to Step 1 of the trial. 1598 patients attending EDs were randomised to UCA, and 2253 were randomised to WBA/active management. Outcome data were obtained at 12 months for 70% and 80% of participants at Step 1 and Step 2, respectively. The majority of people recovered from the injury. Eighteen per cent of the Step 1 cohort had late whiplash syndrome. There was no statistically or clinically significant difference observed in any of the outcomes for participants attending EDs randomised to UCA or active management advice [difference in NDI 0.5, 95% confidence interval (CI) -1.8 to 2.8]. In Step 2 the physiotherapy package resulted in improvements in neck disability at 4 months compared with a single advice session, but these effects were small at the population level (difference in NDI -3.2, 95% CI -5.8 to -0.7). The physiotherapy package was accompanied by a significant reduction in the number of work days lost at 4-month follow-up (difference -40.2, 95% CI -44.3 to -35.8). MINT suggests that enhanced psycho-educational interventions in EDs are no more effective than UCA in reducing the burden of acute whiplash injuries. A physiotherapy package provided to people who have persisting symptoms within the first 6 weeks of injury produced additional short-term benefits in neck disability compared with a single physiotherapy advice session. However, from a health-care perspective, the physiotherapy package was not cost-effective at current levels of willingness to pay. Both experimental treatments were associated with increased cost with no discernible gain in health-related quality of life. However, an important benefit of the physiotherapy package was a reduction in work days lost; consequently, the intervention may prove cost-effective at the societal level. Current Controlled Trials ISRCTN33302125. This project was funded by the NIHR Health Technology Assessment programme and will be published in full in Health Technology Assessment; Vol. 16, No. 49. See the HTA programme website for further project information.

One-Step Pyrolytic Synthesis of Multiwalled Carbon Nanotubes: The Role of Resupply of Carbon Species on the Quality Control.

PubMed

Rajavel, Krishnamoorthy; Saravanan, Padmanapan; Kumar, Ramasamy Thangavelu Rajendra

2018-05-01

An investigation on varying experimental parameters such as solution quantity (2.5, 5 and 7.5 mL) and reaction time (15, 30, 45 and 60 min) was carried out for the production of high-quality multiwalled carbon nanotubes (MWCNTs) in one step pyrolysis. Structural analysis revealed the uniform diameter distribution and the length of nanotubes in the range of 60-80 nm and 0.4-2 μm, respectively. Raman and X-ray diffraction analysis showed a remarkable reduction in defect density with increase in graphitization degree, upon increasing the solution volume and reaction time. MWCNTs prepared at higher solution quantity (7.5 mL) with higher reaction time (60 min) showed higher crystallinity (70% graphitization) and lower defect density (ID/IG: 0.56). The attainment in equilibrium of evaporation cum precipitation in formation of high quality nanotubes structure is evaluated. An effective resupplying of condensed precursors by re-evaporation leads for the achievement of low defect density nanotubes with higher product yield is achieved.

The radiation metrology network related to the field of mammography: implementation and uncertainty analysis of the calibration system

NASA Astrophysics Data System (ADS)

Peixoto, J. G. P.; de Almeida, C. E.

2001-09-01

It is recognized by the international guidelines that it is necessary to offer calibration services for mammography beams in order to improve the quality of clinical diagnosis. Major efforts have been made by several laboratories in order to establish an appropriate and traceable calibration infrastructure and to provide the basis for a quality control programme in mammography. The contribution of the radiation metrology network to the users of mammography is reviewed in this work. Also steps required for the implementation of a mammography calibration system using a constant potential x-ray and a clinical mammography x-ray machine are presented. The various qualities of mammography radiation discussed in this work are in accordance with the IEC 61674 and the AAPM recommendations. They are at present available at several primary standard dosimetry laboratories (PSDLs), namely the PTB, NIST and BEV and a few secondary standard dosimetry laboratories (SSDLs) such as at the University of Wisconsin and at the IAEA's SSDL. We discuss the uncertainties involved in all steps of the calibration chain in accord with the ISO recommendations.

The evolution of technological strategies in the prevention of dialysis water pollution: sixteen years' experience.

PubMed

Bolasco, Piergiorgio; Contu, Antonio; Meloni, Patrizia; Vacca, Dorio; Murtas, Stefano

2012-01-01

This report attempts to illustrate the positive impact on the quality of dialysis water produced over a 16-year period through the progressive optimization of technological procedures. Fundamental steps included the following: elimination of polyvinyl chloride (PVC), periodical controls, introduction of stainless steel and/or polyethylene polymer and substitution of single-pass reverse osmosis (SRO) with double-pass reverse osmosis (DRO). Daily overnight automatic thermal disinfection of distribution piping rings represented the final step. A dramatic improvement was observed in 645 water samples obtained from distribution piping. The measures applied resulted in a significant improvement of water quality, featuring levels of colony-forming units per milliliter ranging from 247.4 ± 393.7 in the presence of PVC and SRO to 14.1 ± 28.0 with stainless steel and DRO and 2.8 ± 3.2 with cross-linked polyethylene thermoplastic polymer and DRO (p < 0.01). Dialysis water should be viewed by nephrologists as a medicinal product, and every effort should be made to ensure a high-quality liquid. Copyright © 2012 S. Karger AG, Basel.

Parenting Intervention Combined With Acceptance and Commitment Therapy: A Trial With Families of Children With Cerebral Palsy

PubMed Central

Sanders, Matthew R.; McKinlay, Lynne; Boyd, Roslyn N.

2016-01-01

Objective To examine the effects of Stepping Stones Triple P (SSTP) and Acceptance and Commitment Therapy (ACT) on child functioning, quality of life, and parental adjustment. Method 67 parents (97.0% mothers) of children (64.2% male; mean age 5.3 ± 3.0 years) with cerebral palsy participated in a randomized controlled trial with three groups: wait-list control, SSTP, and SSTP + ACT. This article details the secondary outcomes. Results In comparison with wait-list, the SSTP + ACT group showed increased functional performance and quality of life as well as decreased parental psychological symptoms. No differences were found for parental confidence. No differences were found between SSTP and wait-list or between SSTP and SSTP + ACT. Conclusions ACT-integrated parenting intervention may be an effective way to target child functioning, quality of life, and parental adjustment. PMID:26702629

A Practical Guide for Managing Customer Service in Base Civil Engineering.

DTIC Science & Technology

1988-04-01

IMPROVING CUSTOMER SERVICE IN BASE CIVIL ENGINEERING Step One: Evaluate Present Service Quality .. ......... .11 Step Two: Develop and Clarify a...cross sectional viewpoint. In chapter three, specific steps will be presented for managers to evaluate and improve the present level of service quality in...customer service in base civil engineering or any other organization for that matter is to evaluate the present level of service quality (1:170). Data

Direct infusion mass spectrometry metabolomics dataset: a benchmark for data processing and quality control

PubMed Central

Kirwan, Jennifer A; Weber, Ralf J M; Broadhurst, David I; Viant, Mark R

2014-01-01

Direct-infusion mass spectrometry (DIMS) metabolomics is an important approach for characterising molecular responses of organisms to disease, drugs and the environment. Increasingly large-scale metabolomics studies are being conducted, necessitating improvements in both bioanalytical and computational workflows to maintain data quality. This dataset represents a systematic evaluation of the reproducibility of a multi-batch DIMS metabolomics study of cardiac tissue extracts. It comprises of twenty biological samples (cow vs. sheep) that were analysed repeatedly, in 8 batches across 7 days, together with a concurrent set of quality control (QC) samples. Data are presented from each step of the workflow and are available in MetaboLights. The strength of the dataset is that intra- and inter-batch variation can be corrected using QC spectra and the quality of this correction assessed independently using the repeatedly-measured biological samples. Originally designed to test the efficacy of a batch-correction algorithm, it will enable others to evaluate novel data processing algorithms. Furthermore, this dataset serves as a benchmark for DIMS metabolomics, derived using best-practice workflows and rigorous quality assessment. PMID:25977770

A study on the quality control of slow burning polyester

NASA Astrophysics Data System (ADS)

Chen, Bin; Wang, Yinglei; Yan, Zhengfeng; Yu, Tao

2018-04-01

In this paper, the influence of the alcohol/acid mole ratio, reaction temperature, warm-up mode, end-capping, vacuity to the quality of slow burning polyester was studied. The hydroxyl value will increase when the alcohol/acid mole ratio increase, but the acid value and molecular weight will decrease. The molecular weight and molecular weight distribution of the polyester consistent with the designed one can be obtained by stepped heating up. Monobasic alcohol end-capping can be used to control the molecular weight effectively and reduce acid value. Stripping process narrow the molecular weight distribution and reduce the hydroxyl value. Decompression is in favor of the decrease of acid value and increase of the reaction speed to get qualified production.

Multi-application controls: Robust nonlinear multivariable aerospace controls applications

NASA Technical Reports Server (NTRS)

Enns, Dale F.; Bugajski, Daniel J.; Carter, John; Antoniewicz, Bob

1994-01-01

This viewgraph presentation describes the general methodology used to apply Honywell's Multi-Application Control (MACH) and the specific application to the F-18 High Angle-of-Attack Research Vehicle (HARV) including piloted simulation handling qualities evaluation. The general steps include insertion of modeling data for geometry and mass properties, aerodynamics, propulsion data and assumptions, requirements and specifications, e.g. definition of control variables, handling qualities, stability margins and statements for bandwidth, control power, priorities, position and rate limits. The specific steps include choice of independent variables for least squares fits to aerodynamic and propulsion data, modifications to the management of the controls with regard to integrator windup and actuation limiting and priorities, e.g. pitch priority over roll, and command limiting to prevent departures and/or undesirable inertial coupling or inability to recover to a stable trim condition. The HARV control problem is characterized by significant nonlinearities and multivariable interactions in the low speed, high angle-of-attack, high angular rate flight regime. Systematic approaches to the control of vehicle motions modeled with coupled nonlinear equations of motion have been developed. This paper will discuss the dynamic inversion approach which explicity accounts for nonlinearities in the control design. Multiple control effectors (including aerodynamic control surfaces and thrust vectoring control) and sensors are used to control the motions of the vehicles in several degrees-of-freedom. Several maneuvers will be used to illustrate performance of MACH in the high angle-of-attack flight regime. Analytical methods for assessing the robust performance of the multivariable control system in the presence of math modeling uncertainty, disturbances, and commands have reached a high level of maturity. The structured singular value (mu) frequency response methodology is presented as a method for analyzing robust performance and the mu-synthesis method will be presented as a method for synthesizing a robust control system. The paper concludes with the author's expectations regarding future applications of robust nonlinear multivariable controls.

Cross-Cultural Adaptation of the Urticaria Control Test From German to Castilian Spanish.

PubMed

García-Díez, I; Curto-Barredo, L; Weller, K; Pujol, R M; Maurer, M; Giménez-Arnau, A M

2015-11-01

The clinical concept of urticaria embraces a heterogeneous group of conditions classified according to their clinical course as acute (lasting less than 6 weeks) or chronic (lasting 6 weeks or more). Chronic urticaria may be either spontaneous or induced. Few tools are available for monitoring the various clinical forms of this disease or for evaluating its impact on quality of life. The recently developed Urticaria Control Test to evaluate disease control is available in German, the original language, and American English. To culturally adapt the long and short versions of the Urticaria Control Test to Castilian Spanish to ensure equivalence between the translated items and those of the original version. To translate the Urticaria Control Test we followed the International Society for Pharmacoeconomics and Outcomes Research good practice guidelines, starting with forward translation and moving through back translation and cognitive debriefing steps. Three items were modified when the first Spanish version, translated from German, was discussed (cognitive debriefing). The revised translation was then translated back to German and sent to the Urticaria Control Test authors, who modified one item they considered had acquired a different focus through translation. A third Spanish version was then prepared and after minor proofreading changes was considered definitive. This study was the first step in making it possible to use the Urticaria Control Test questionnaire in Castilian Spanish. The next step will be to validate the translated questionnaire. Copyright © 2015 Elsevier España, S.L.U. and AEDV. All rights reserved.

Integrating palliative care in long-term care facilities across Europe (PACE): protocol of a cluster randomized controlled trial of the 'PACE Steps to Success' intervention in seven countries.

PubMed

Smets, Tinne; Onwuteaka-Philipsen, Bregje B D; Miranda, Rose; Pivodic, Lara; Tanghe, Marc; van Hout, Hein; Pasman, Roeline H R W; Oosterveld-Vlug, Mariska; Piers, Ruth; Van Den Noortgate, Nele; Wichmann, Anne B; Engels, Yvonne; Vernooij-Dassen, Myrra; Hockley, Jo; Froggatt, Katherine; Payne, Sheila; Szczerbińska, Katarzyna; Kylänen, Marika; Leppäaho, Suvi; Barańska, Ilona; Gambassi, Giovanni; Pautex, Sophie; Bassal, Catherine; Deliens, Luc; Van den Block, Lieve

2018-03-12

Several studies have highlighted the need for improvement in palliative care delivered to older people long-term care facilities. However, the available evidence on how to improve palliative care in these settings is weak, especially in Europe. We describe the protocol of the PACE trial aimed to 1) evaluate the effectiveness and cost-effectiveness of the 'PACE Steps to Success' palliative care intervention for older people in long-term care facilities, and 2) assess the implementation process and identify facilitators and barriers for implementation in different countries. We will conduct a multi-facility cluster randomised controlled trial in Belgium, Finland, Italy, the Netherlands, Poland, Switzerland and England. In total, 72 facilities will be randomized to receive the 'Pace Steps to Success intervention' or to 'care as usual'. Primary outcome at resident level: quality of dying (CAD-EOLD); and at staff level: staff knowledge of palliative care (Palliative Care Survey). resident's quality of end-of-life care, staff self-efficacy, self-perceived educational needs, and opinions on palliative care. Economic outcomes: direct costs and quality-adjusted life years (QALYs). Measurements are performed at baseline and after the intervention. For the resident-level outcomes, facilities report all deaths of residents in and outside the facilities over a previous four-month period and structured questionnaires are sent to (1) the administrator, (2) staff member most involved in care (3) treating general practitioner, and (4) a relative. For the staff-level outcomes, all staff who are working in the facilities are asked to complete a structured questionnaire. A process evaluation will run alongside the effectiveness evaluation in the intervention group using the RE-AIM framework. The lack of high quality trials in palliative care has been recognized throughout the field of palliative care research. This cross-national cluster RCT designed to evaluate the impact of the palliative care intervention for long-term care facilities 'PACE Steps to Success' in seven countries, will provide important evidence concerning the effectiveness as well as the preconditions for optimal implementation of palliative care in nursing homes, and this within different health care systems. The study is registered at www.isrctn.com - ISRCTN14741671 (FP7-HEALTH-2013-INNOVATION-1 603111) Registration date: July 30, 2015.

Real-time feedback control of twin-screw wet granulation based on image analysis.

PubMed

Madarász, Lajos; Nagy, Zsombor Kristóf; Hoffer, István; Szabó, Barnabás; Csontos, István; Pataki, Hajnalka; Démuth, Balázs; Szabó, Bence; Csorba, Kristóf; Marosi, György

2018-06-04

The present paper reports the first dynamic image analysis-based feedback control of continuous twin-screw wet granulation process. Granulation of the blend of lactose and starch was selected as a model process. The size and size distribution of the obtained particles were successfully monitored by a process camera coupled with an image analysis software developed by the authors. The validation of the developed system showed that the particle size analysis tool can determine the size of the granules with an error of less than 5 µm. The next step was to implement real-time feedback control of the process by controlling the liquid feeding rate of the pump through a PC, based on the real-time determined particle size results. After the establishment of the feedback control, the system could correct different real-life disturbances, creating a Process Analytically Controlled Technology (PACT), which guarantees the real-time monitoring and controlling of the quality of the granules. In the event of changes or bad tendencies in the particle size, the system can automatically compensate the effect of disturbances, ensuring proper product quality. This kind of quality assurance approach is especially important in the case of continuous pharmaceutical technologies. Copyright © 2018 Elsevier B.V. All rights reserved.

Screening bioactive quality control markers of QiShenYiQi dripping pills based on the relationship between the ultra-high performance liquid chromatography fingerprint and vascular protective activity.

PubMed

Zhuo, Limeng; Peng, Jingjing; Zhao, Yunli; Li, Dongxiang; Xie, Xiuman; Tong, Ling; Yu, Zhiguo

2017-10-01

Traditional Chinese medicine consists of complex phytochemical constituents. Selecting appropriate analytical markers of traditional Chinese medicine is a critical step in quality control. Currently, the combination of fingerprinting and efficacy evaluation is considered as a useful method for screening active ingredients in complex mixtures. This study was designed to develop an orthogonal partial least squares model for screening bioactive quality control markers of QishenYiqi dripping pills based on the fingerprint-efficacy relationship. First, the chemical fingerprints of 49 batches of QishenYiqi dripping pill samples were established by ultra-high performance liquid chromatography coupled with a photodiode array detector. Second, ultra-high performance liquid chromatography coupled with quadrupole-time-of-flight mass spectrometry was exploited to systematically investigate the 36 copossessing fingerprint components in QishenYiqi dripping pills. The vascular protective activity of QishenYiqi dripping pills was determined by using a cell counting kit-8 assay. Finally, fingerprint-efficacy relationship was established by orthogonal partial least squares model. The results indicated that ten components exhibited strong correlation with vascular protective activity, and these were preliminarily screened as quality control markers. The present study provided a novel idea for the study of the pharmacodynamic material basis and quality evaluation of QishenYiqi dripping pills. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Research on the effect of coverage rate on the surface quality in laser direct writing process

NASA Astrophysics Data System (ADS)

Pan, Xuetao; Tu, Dawei

2017-07-01

Direct writing technique is usually used in femtosecond laser two-photon micromachining. The size of the scanning step is an important factor affecting the surface quality and machining efficiency of micro devices. According to the mechanism of two-photon polymerization, combining the distribution function of light intensity and the free radical concentration theory, we establish the mathematical model of coverage of solidification unit, then analyze the effect of coverage on the machining quality and efficiency. Using the principle of exposure equivalence, we also obtained the analytic expressions of the relationship among the surface quality characteristic parameters of microdevices and the scanning step, and carried out the numerical simulation and experiment. The results show that the scanning step has little influence on the surface quality of the line when it is much smaller than the size of the solidification unit. However, with increasing scanning step, the smoothness of line surface is reduced rapidly, and the surface quality becomes much worse.

Estimation of 3D reconstruction errors in a stereo-vision system

NASA Astrophysics Data System (ADS)

Belhaoua, A.; Kohler, S.; Hirsch, E.

2009-06-01

The paper presents an approach for error estimation for the various steps of an automated 3D vision-based reconstruction procedure of manufactured workpieces. The process is based on a priori planning of the task and built around a cognitive intelligent sensory system using so-called Situation Graph Trees (SGT) as a planning tool. Such an automated quality control system requires the coordination of a set of complex processes performing sequentially data acquisition, its quantitative evaluation and the comparison with a reference model (e.g., CAD object model) in order to evaluate quantitatively the object. To ensure efficient quality control, the aim is to be able to state if reconstruction results fulfill tolerance rules or not. Thus, the goal is to evaluate independently the error for each step of the stereo-vision based 3D reconstruction (e.g., for calibration, contour segmentation, matching and reconstruction) and then to estimate the error for the whole system. In this contribution, we analyze particularly the segmentation error due to localization errors for extracted edge points supposed to belong to lines and curves composing the outline of the workpiece under evaluation. The fitting parameters describing these geometric features are used as quality measure to determine confidence intervals and finally to estimate the segmentation errors. These errors are then propagated through the whole reconstruction procedure, enabling to evaluate their effect on the final 3D reconstruction result, specifically on position uncertainties. Lastly, analysis of these error estimates enables to evaluate the quality of the 3D reconstruction, as illustrated by the shown experimental results.

A bill to amend the Energy Employees Occupational Illness Compensation Program Act of 2000 to strengthen the quality control measures in place for part B lung disease claims and part E processes with independent reviews.

THOMAS, 112th Congress

Sen. Udall, Mark [D-CO

2011-03-10

Senate - 03/10/2011 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

An eye movement pre-training fosters the comprehension of processes and functions in technical systems.

PubMed

Skuballa, Irene T; Fortunski, Caroline; Renkl, Alexander

2015-01-01

The main research goal of the present study was to investigate in how far pre-training eye movements can facilitate knowledge acquisition in multimedia (pre-training principle). We combined considerations from research on eye movement modeling and pre-training to design and test a non-verbal eye movement-based pre-training. Participants in the experimental condition watched an animated circle moving in close spatial resemblance to a static visualization of a solar plant accompanied by a narration in a subsequently presented learning environment. This training was expected to foster top-down processes as reflected in gaze behavior during the learning process and enhance knowledge acquisition. We compared two groups (N = 45): participants in the experimental condition received pre-training in a first step and processed the learning material in a second step, whereas the control group underwent the second step without any pre-training. The pre-training group outperformed the control group in their learning outcomes, particularly in knowledge about processes and functions of the solar plant. However, the superior learning outcomes in the pre-training group could not be explained by eye-movement patterns. Furthermore, the pre-training moderated the relationship between experienced stress and learning outcomes. In the control group, high stress levels hindered learning, which was not found for the pre-training group. On a delayed posttest participants were requested to draw a picture of the learning content. Despite a non-significant effect of training on the quality of drawings, the pre-training showed associations between learning outcomes at the first testing time and process-related aspects in the quality of their drawings. Overall, non-verbal pre-training is a successful instructional intervention to promote learning processes in novices although these processes did not directly reflect in learners' eye movement behavior during learning.

Data Access Services that Make Remote Sensing Data Easier to Use

NASA Technical Reports Server (NTRS)

Lynnes, Christopher

2010-01-01

This slide presentation reviews some of the processes that NASA uses to make the remote sensing data easy to use over the World Wide Web. This work involves much research into data formats, geolocation structures and quality indicators, often to be followed by coding a preprocessing program. Only then are the data usable within the analysis tool of choice. The Goddard Earth Sciences Data and Information Services Center is deploying a variety of data access services that are designed to dramatically shorten the time consumed in the data preparation step. On-the-fly conversion to the standard network Common Data Form (netCDF) format with Climate-Forecast (CF) conventions imposes a standard coordinate system framework that makes data instantly readable through several tools, such as the Integrated Data Viewer, Gridded Analysis and Display System, Panoply and Ferret. A similar benefit is achieved by serving data through the Open Source Project for a Network Data Access Protocol (OPeNDAP), which also provides subsetting. The Data Quality Screening Service goes a step further in filtering out data points based on quality control flags, based on science team recommendations or user-specified criteria. Further still is the Giovanni online analysis system which goes beyond handling formatting and quality to provide visualization and basic statistics of the data. This general approach of automating the preparation steps has the important added benefit of enabling use of the data by non-human users (i.e., computer programs), which often make sub-optimal use of the available data due to the need to hard-code data preparation on the client side.

Considerations In The Design And Specifications Of An Automatic Inspection System

NASA Astrophysics Data System (ADS)

Lee, David T.

1980-05-01

Considerable activities have been centered around the automation of manufacturing quality control and inspection functions. Several reasons can be cited for this development. The continuous pressure of direct and indirect labor cost increase is only one of the obvious motivations. With the drive for electronics miniaturization come more and more complex processes where control parameters are critical and the yield is highly susceptible to inadequate process monitor and inspection. With multi-step, multi-layer process for substrate fabrication, process defects that are not detected and corrected at certain critical points may render the entire subassembly useless. As a process becomes more complex, the time required to test the product increases significantly in the total build cycle. The urgency to reduce test time brings more pressure to improve in-process control and inspection. The advances and improvements of components, assemblies and systems such as micro-processors, micro-computers, programmable controllers, and other intelligent devices, have made the automation of quality control much more cost effective and justifiable.

Procedures for the GMP-Compliant Production and Quality Control of [18F]PSMA-1007: A Next Generation Radiofluorinated Tracer for the Detection of Prostate Cancer

PubMed Central

Cardinale, Jens; Martin, René; Remde, Yvonne; Schäfer, Martin; Hienzsch, Antje; Hübner, Sandra; Zerges, Anna-Maria; Marx, Heike; Hesse, Ronny; Weber, Klaus; Smits, Rene; Hoepping, Alexander; Müller, Marco; Neels, Oliver C.; Kopka, Klaus

2017-01-01

Radiolabeled tracers targeting the prostate-specific membrane antigen (PSMA) have become important radiopharmaceuticals for the PET-imaging of prostate cancer. In this connection, we recently developed the fluorine-18-labelled PSMA-ligand [18F]PSMA-1007 as the next generation radiofluorinated Glu-ureido PSMA inhibitor after [18F]DCFPyL and [18F]DCFBC. Since radiosynthesis so far has been suffering from rather poor yields, novel procedures for the automated radiosyntheses of [18F]PSMA-1007 have been developed. We herein report on both the two-step and the novel one-step procedures, which have been performed on different commonly-used radiosynthesisers. Using the novel one-step procedure, the [18F]PSMA-1007 was produced in good radiochemical yields ranging from 25 to 80% and synthesis times of less than 55 min. Furthermore, upscaling to product activities up to 50 GBq per batch was successfully conducted. All batches passed quality control according to European Pharmacopoeia standards. Therefore, we were able to disclose a new, simple and, at the same time, high yielding production pathway for the next generation PSMA radioligand [18F]PSMA-1007. Actually, it turned out that the radiosynthesis is as easily realised as the well-known [18F]FDG synthesis and, thus, transferable to all currently-available radiosynthesisers. Using the new procedures, the clinical daily routine can be sustainably supported in-house even in larger hospitals by a single production batch. PMID:28953234

Tissue-aware RNA-Seq processing and normalization for heterogeneous and sparse data.

PubMed

Paulson, Joseph N; Chen, Cho-Yi; Lopes-Ramos, Camila M; Kuijjer, Marieke L; Platig, John; Sonawane, Abhijeet R; Fagny, Maud; Glass, Kimberly; Quackenbush, John

2017-10-03

Although ultrahigh-throughput RNA-Sequencing has become the dominant technology for genome-wide transcriptional profiling, the vast majority of RNA-Seq studies typically profile only tens of samples, and most analytical pipelines are optimized for these smaller studies. However, projects are generating ever-larger data sets comprising RNA-Seq data from hundreds or thousands of samples, often collected at multiple centers and from diverse tissues. These complex data sets present significant analytical challenges due to batch and tissue effects, but provide the opportunity to revisit the assumptions and methods that we use to preprocess, normalize, and filter RNA-Seq data - critical first steps for any subsequent analysis. We find that analysis of large RNA-Seq data sets requires both careful quality control and the need to account for sparsity due to the heterogeneity intrinsic in multi-group studies. We developed Yet Another RNA Normalization software pipeline (YARN), that includes quality control and preprocessing, gene filtering, and normalization steps designed to facilitate downstream analysis of large, heterogeneous RNA-Seq data sets and we demonstrate its use with data from the Genotype-Tissue Expression (GTEx) project. An R package instantiating YARN is available at http://bioconductor.org/packages/yarn .

Coping and social problem solving correlates of asthma control and quality of life.

PubMed

McCormick, Sean P; Nezu, Christine M; Nezu, Arthur M; Sherman, Michael; Davey, Adam; Collins, Bradley N

2014-02-01

In a sample of adults with asthma receiving care and medication in an outpatient pulmonary clinic, this study tested for statistical associations between social problem-solving styles, asthma control, and asthma-related quality of life. These variables were measured cross sectionally as a first step toward more systematic application of social problem-solving frameworks in asthma self-management training. Recruitment occurred during pulmonology clinic service hours. Forty-four adults with physician-confirmed diagnosis of asthma provided data including age, gender, height, weight, race, income, and comorbid conditions. The Asthma Control Questionnaire, the Mini Asthma Quality of Life Questionnaire (Short Form), and peak expiratory force measures offered multiple views of asthma health at the time of the study. Maladaptive coping (impulsive and careless problem-solving styles) based on transactional stress models of health were assessed with the Social Problem-Solving Inventory-Revised: Short Form. Controlling for variance associated with gender, age, and income, individuals reporting higher impulsive-careless scores exhibited significantly lower scores on asthma control (β = 0.70, p = 0.001, confidence interval (CI) [0.37-1.04]) and lower asthma-related quality of life (β = 0.79, p = 0.017, CI [0.15-1.42]). These findings suggest that specific maladaptive problem-solving styles may uniquely contribute to asthma health burdens. Because problem-solving coping strategies are both measureable and teachable, behavioral interventions aimed at facilitating adaptive coping and problem solving could positively affect patient's asthma management and quality of life.

Application of a nonrandomized stepped wedge design to evaluate an evidence-based quality improvement intervention: a proof of concept using simulated data on patient-centered medical homes.

PubMed

Huynh, Alexis K; Lee, Martin L; Farmer, Melissa M; Rubenstein, Lisa V

2016-10-21

Stepped wedge designs have gained recognition as a method for rigorously assessing implementation of evidence-based quality improvement interventions (QIIs) across multiple healthcare sites. In theory, this design uses random assignment of sites to successive QII implementation start dates based on a timeline determined by evaluators. However, in practice, QII timing is often controlled more by site readiness. We propose an alternate version of the stepped wedge design that does not assume the randomized timing of implementation while retaining the method's analytic advantages and applying to a broader set of evaluations. To test the feasibility of a nonrandomized stepped wedge design, we developed simulated data on patient care experiences and on QII implementation that had the structures and features of the expected data from a planned QII. We then applied the design in anticipation of performing an actual QII evaluation. We used simulated data on 108,000 patients to model nonrandomized stepped wedge results from QII implementation across nine primary care sites over 12 quarters. The outcome we simulated was change in a single self-administered question on access to care used by Veterans Health Administration (VA), based in the United States, as part of its quarterly patient ratings of quality of care. Our main predictors were QII exposure and time. Based on study hypotheses, we assigned values of 4 to 11 % for improvement in access when sites were first exposed to implementation and 1 to 3 % improvement in each ensuing time period thereafter when sites continued with implementation. We included site-level (practice size) and respondent-level (gender, race/ethnicity) characteristics that might account for nonrandomized timing in site implementation of the QII. We analyzed the resulting data as a repeated cross-sectional model using HLM 7 with a three-level hierarchical data structure and an ordinal outcome. Levels in the data structure included patient ratings, timing of adoption of the QII, and primary care site. We were able to demonstrate a statistically significant improvement in adoption of the QII, as postulated in our simulation. The linear time trend while sites were in the control state was not significant, also as expected in the real life scenario of the example QII. We concluded that the nonrandomized stepped wedge design was feasible within the parameters of our planned QII with its data structure and content. Our statistical approach may be applicable to similar evaluations.

Web-based X-ray quality control documentation.

PubMed

David, George; Burnett, Lou Ann; Schenkel, Robert

2003-01-01

The department of radiology at the Medical College of Georgia Hospital and Clinics has developed an equipment quality control web site. Our goal is to provide immediate access to virtually all medical physics survey data. The web site is designed to assist equipment engineers, department management and technologists. By improving communications and access to equipment documentation, we believe productivity is enhanced. The creation of the quality control web site was accomplished in three distinct steps. First, survey data had to be placed in a computer format. The second step was to convert these various computer files to a format supported by commercial web browsers. Third, a comprehensive home page had to be designed to provide convenient access to the multitude of surveys done in the various x-ray rooms. Because we had spent years previously fine-tuning the computerization of the medical physics quality control program, most survey documentation was already in spreadsheet or database format. A major technical decision was the method of conversion of survey spreadsheet and database files into documentation appropriate for the web. After an unsatisfactory experience with a HyperText Markup Language (HTML) converter (packaged with spreadsheet and database software), we tried creating Portable Document Format (PDF) files using Adobe Acrobat software. This process preserves the original formatting of the document and takes no longer than conventional printing; therefore, it has been very successful. Although the PDF file generated by Adobe Acrobat is a proprietary format, it can be displayed through a conventional web browser using the freely distributed Adobe Acrobat Reader program that is available for virtually all platforms. Once a user installs the software, it is automatically invoked by the web browser whenever the user follows a link to a file with a PDF extension. Although no confidential patient information is available on the web site, our legal department recommended that we secure the site in order to keep out those wishing to make mischief. Our interim solution has not been to password protect the page, which we feared would hinder access for occasional legitimate users, but also not to provide links to it from other hospital and department pages. Utility and productivity were improved and time and money were saved by making radiological equipment quality control documentation instantly available on-line.

What's to Be Done About Laboratory Quality? Process Indicators, Laboratory Stewardship, the Outcomes Problem, Risk Assessment, and Economic Value: Responding to Contemporary Global Challenges.

PubMed

Meier, Frederick A; Badrick, Tony C; Sikaris, Kenneth A

2018-02-17

For 50 years, structure, process, and outcomes measures have assessed health care quality. For clinical laboratories, structural quality has generally been assessed by inspection. For assessing process, quality indicators (QIs), statistical monitors of steps in the clinical laboratory total testing, have proliferated across the globe. Connections between structural and process laboratory measures and patient outcomes, however, have rarely been demonstrated. To inform further development of clinical laboratory quality systems, we conducted a selective but worldwide review of publications on clinical laboratory quality assessment. Some QIs, like seven generic College of American Pathologists Q-Tracks monitors, have demonstrated significant process improvement; other measures have uncovered critical opportunities to improve test selection and result management. The College of Pathologists of Australasia Key Indicator Monitoring and Management System has deployed risk calculations, introduced from failure mode effects analysis, as surrogate measures for outcomes. Showing economic value from clinical laboratory testing quality is a challenge. Clinical laboratories should converge on fewer (7-14) rather than more (21-35) process monitors; monitors should cover all steps of the testing process under laboratory control and include especially high-risk specimen-quality QIs. Clinical laboratory stewardship, the combination of education interventions among clinician test orderers and report consumers with revision of test order formats and result reporting schemes, improves test ordering, but improving result reception is more difficult. Risk calculation reorders the importance of quality monitors by balancing three probabilities: defect frequency, weight of potential harm, and detection difficulty. The triple approach of (1) a more focused suite of generic consensus quality indicators, (2) more active clinical laboratory testing stewardship, and (3) integration of formal risk assessment, rather than competing with economic value, enhances it.

ESCAlate - Adaptive treatment approach for adolescents and adults with ADHD: study protocol for a randomized controlled trial.

PubMed

Zinnow, Toivo; Banaschewski, Tobias; Fallgatter, Andreas J; Jenkner, Carolin; Philipp-Wiegmann, Florence; Philipsen, Alexandra; Retz, Wolfgang; Sobanski, Esther; Thome, Johannes; Rösler, Michael

2018-05-18

Over the last decade, a wide range of attention-deficit/hyperactivity disorder (ADHD) treatment approaches for adults, including both pharmacological interventions and psychosocial treatments, have been proposed and observed to be efficient. In practice, individual treatment concepts are based on results of clinical studies as well as international guidelines (NICE Guidelines) that recommend a step-by-step treatment approach. Since the evidence supporting this approach is limited, the aim of the present study is to determine an optimal intervention regarding severity levels of ADHD symptomatology conducting a randomized controlled trial. We aim to include 279 ADHD subjects aged between 16 and 45 years. First, participants are randomized to either a face-to-face psychoeducation, telephone assisted self-help (TASH), or a waiting control group (Step 1). All participants assigned to the control group are treated using TASH after a 3-month waiting period. Participants are then allocated to one of three groups, based on their remaining severity level of ADHD symptoms, as (1) full responder, (2) partial responder, or (3) non-responder (Step 2). Full responders receive counseling, partial responders receive either counseling only or counseling and neurofeedback (NF), and non-responders receive either pharmacological treatment only or pharmacological treatment and NF, followed by a 3 month period without intervention. The naturalistic sample is one of the study's advantages, avoiding highly selective inclusion or exclusion criteria. The efficacy of an evidence-based stepped care intervention is explored by primary (reduction of severity of ADHD symptoms) and secondary outcomes (functional outcomes, e.g., quality of life, anger management, enhancement of psychosocial well-being). Predictors of therapeutic response and non-response are being investigated at each step of intervention. Further, sex differences are also being explored. This study is registered by the German Trial Register (reference number: DRKS00008975 ), 23 October 2015.

SAMI: Sydney-AAO Multi-object Integral field spectrograph pipeline

NASA Astrophysics Data System (ADS)

Allen, J. T.; Green, A. W.; Fogarty, L. M. R.; Sharp, R.; Nielsen, J.; Konstantopoulos, I.; Taylor, E. N.; Scott, N.; Cortese, L.; Richards, S. N.; Croom, S.; Owers, M. S.; Bauer, A. E.; Sweet, S. M.; Bryant, J. J.

2014-07-01

The SAMI (Sydney-AAO Multi-object Integral field spectrograph) pipeline reduces data from the Sydney-AAO Multi-object Integral field spectrograph (SAMI) for the SAMI Galaxy Survey. The python code organizes SAMI data and, along with the AAO 2dfdr package, carries out all steps in the data reduction, from raw data to fully calibrated datacubes. The principal steps are: data management, use of 2dfdr to produce row-stacked spectra, flux calibration, correction for telluric absorption, removal of atmospheric dispersion, alignment of dithered exposures, and drizzling onto a regular output grid. Variance and covariance information is tracked throughout the pipeline. Some quality control routines are also included.

Minimally invasive 'step-up approach' versus maximal necrosectomy in patients with acute necrotising pancreatitis (PANTER trial): design and rationale of a randomised controlled multicenter trial [ISRCTN13975868].

PubMed

Besselink, Marc G H; van Santvoort, Hjalmar C; Nieuwenhuijs, Vincent B; Boermeester, Marja A; Bollen, Thomas L; Buskens, Erik; Dejong, Cornelis H C; van Eijck, Casper H J; van Goor, Harry; Hofker, Sijbrand S; Lameris, Johan S; van Leeuwen, Maarten S; Ploeg, Rutger J; van Ramshorst, Bert; Schaapherder, Alexander F M; Cuesta, Miguel A; Consten, Esther C J; Gouma, Dirk J; van der Harst, Erwin; Hesselink, Eric J; Houdijk, Lex P J; Karsten, Tom M; van Laarhoven, Cees J H M; Pierie, Jean-Pierre E N; Rosman, Camiel; Bilgen, Ernst Jan Spillenaar; Timmer, Robin; van der Tweel, Ingeborg; de Wit, Ralph J; Witteman, Ben J M; Gooszen, Hein G

2006-04-11

The initial treatment of acute necrotizing pancreatitis is conservative. Intervention is indicated in patients with (suspected) infected necrotizing pancreatitis. In the Netherlands, the standard intervention is necrosectomy by laparotomy followed by continuous postoperative lavage (CPL). In recent years several minimally invasive strategies have been introduced. So far, these strategies have never been compared in a randomised controlled trial. The PANTER study (PAncreatitis, Necrosectomy versus sTEp up appRoach) was conceived to yield the evidence needed for a considered policy decision. 88 patients with (suspected) infected necrotizing pancreatitis will be randomly allocated to either group A) minimally invasive 'step-up approach' starting with drainage followed, if necessary, by videoscopic assisted retroperitoneal debridement (VARD) or group B) maximal necrosectomy by laparotomy. Both procedures are followed by CPL. Patients will be recruited from 20 hospitals, including all Dutch university medical centres, over a 3-year period. The primary endpoint is the proportion of patients suffering from postoperative major morbidity and mortality. Secondary endpoints are complications, new onset sepsis, length of hospital and intensive care stay, quality of life and total (direct and indirect) costs. To demonstrate that the 'step-up approach' can reduce the major morbidity and mortality rate from 45 to 16%, with 80% power at 5% alpha, a total sample size of 88 patients was calculated. The PANTER-study is a randomised controlled trial that will provide evidence on the merits of a minimally invasive 'step-up approach' in patients with (suspected) infected necrotizing pancreatitis.

Minimally invasive 'step-up approach' versus maximal necrosectomy in patients with acute necrotising pancreatitis (PANTER trial): design and rationale of a randomised controlled multicenter trial [ISRCTN38327949

PubMed Central

Besselink, Marc GH; van Santvoort, Hjalmar C; Nieuwenhuijs, Vincent B; Boermeester, Marja A; Bollen, Thomas L; Buskens, Erik; Dejong, Cornelis HC; van Eijck, Casper HJ; van Goor, Harry; Hofker, Sijbrand S; Lameris, Johan S; van Leeuwen, Maarten S; Ploeg, Rutger J; van Ramshorst, Bert; Schaapherder, Alexander FM; Cuesta, Miguel A; Consten, Esther CJ; Gouma, Dirk J; van der Harst, Erwin; Hesselink, Eric J; Houdijk, Lex PJ; Karsten, Tom M; van Laarhoven, Cees JHM; Pierie, Jean-Pierre EN; Rosman, Camiel; Bilgen, Ernst Jan Spillenaar; Timmer, Robin; van der Tweel, Ingeborg; de Wit, Ralph J; Witteman, Ben JM; Gooszen, Hein G

2006-01-01

Background The initial treatment of acute necrotizing pancreatitis is conservative. Intervention is indicated in patients with (suspected) infected necrotizing pancreatitis. In the Netherlands, the standard intervention is necrosectomy by laparotomy followed by continuous postoperative lavage (CPL). In recent years several minimally invasive strategies have been introduced. So far, these strategies have never been compared in a randomised controlled trial. The PANTER study (PAncreatitis, Necrosectomy versus sTEp up appRoach) was conceived to yield the evidence needed for a considered policy decision. Methods/design 88 patients with (suspected) infected necrotizing pancreatitis will be randomly allocated to either group A) minimally invasive 'step-up approach' starting with drainage followed, if necessary, by videoscopic assisted retroperitoneal debridement (VARD) or group B) maximal necrosectomy by laparotomy. Both procedures are followed by CPL. Patients will be recruited from 20 hospitals, including all Dutch university medical centres, over a 3-year period. The primary endpoint is the proportion of patients suffering from postoperative major morbidity and mortality. Secondary endpoints are complications, new onset sepsis, length of hospital and intensive care stay, quality of life and total (direct and indirect) costs. To demonstrate that the 'step-up approach' can reduce the major morbidity and mortality rate from 45 to 16%, with 80% power at 5% alpha, a total sample size of 88 patients was calculated. Discussion The PANTER-study is a randomised controlled trial that will provide evidence on the merits of a minimally invasive 'step-up approach' in patients with (suspected) infected necrotizing pancreatitis. PMID:16606471

The Effects of an Orientation Program on Quality of Life of Patients with Thalassemia: a Quasi-Experimental Study.

PubMed

Rafii, Zahra; Ahmadi, Fazlollah; Nourbakhsh, Sayed Mohamad Kazem; Hajizadeh, Ebrahim

2016-09-01

Introduction: Medical advances have improved life expectancy and survival of patients with thalassemia. However, as getting older, patients with thalassemia experience different complications which impair their quality of life. The aim of this study was to examine the effects of a nurse-implemented orientation program on quality of life in patients with thalassemia. Methods: A convenience sample of 55 patients with thalassemia were recruited in this quasi-experimental study. Patients were randomly allocated to control or experimental groups. A demographic questionnaire, Thalassemia quality of life questionnaire, and 36-item short form health survey were used for data collection before and one month after the intervention. In the intervention group, 1.5-month orientation program including of the three steps of inauguration, implementation, and closure was implemented, while the control group received routine care. The Chi-square, independent t-test and paired-samples t-test were used for data analysis by using SPSS ver.13 software. Results: The intervention and control group did not differ significantly from each other regarding demographic characteristics. Moreover, no significant difference was observed between the two groups regarding the quality of life scores after the implementation of orientation program. Conclusion: Implementing a short-term orientation program was not effective in enhancing the quality of life in patients with thalassemia; hence, developing long-term multimodal strategies may result in better improvement.

An experimental investigation on the thermal field of overlapping layers in laser-assisted tape winding process

NASA Astrophysics Data System (ADS)

Hosseini, S. M. A.; Baran, I.; Akkerman, R.

2018-05-01

The laser-assisted tape winding (LATW) is an automated process for manufacturing fiber-reinforced thermoplastic tubular products, such as pipes and pressure vessels. Multi-physical phenomena such as heat transfer, mechanical bonding, phase changes and solid mechanics take place during the process. These phenomena need to be understood and described well for an improved product reliability. Temperature is one of the important parameters in this process to control and optimize the product quality which can be employed in an intelligent model-based inline control system. The incoming tape can overlap with the already wounded layer during the process based on the lay-up configuration. In this situation, the incoming tape can step-on or step-off to an already deposited layer/laminate. During the overlapping, the part temperature changes due to the variation of the geometry caused by previously deposited layer, i.e. a bump geometry. In order to qualify the temperature behavior at the bump regions, an experimental set up is designed on a flat laminate. Artificial bumps/steps are formed on the laminate with various thicknesses and fiber orientations. As the laser head experiences the step-on and step-off, the IR (Infra-Red) camera and the embedded thermocouples measure the temperature on the surface and inside the laminate, respectively. During the step-on, a small drop in temperature is observed while in step-off a higher peak in temperature is observed. It can be concluded that the change in the temperature during overlapping is due to the change in laser incident angle made by the bump geometry. The effect of the step thickness on the temperature peak is quantified and found to be significant.

A training approach to improve stepping automaticity while dual-tasking in Parkinson's disease

PubMed Central

Chomiak, Taylor; Watts, Alexander; Meyer, Nicole; Pereira, Fernando V.; Hu, Bin

2017-01-01

Abstract Background: Deficits in motor movement automaticity in Parkinson's disease (PD), especially during multitasking, are early and consistent hallmarks of cognitive function decline, which increases fall risk and reduces quality of life. This study aimed to test the feasibility and potential efficacy of a wearable sensor-enabled technological platform designed for an in-home music-contingent stepping-in-place (SIP) training program to improve step automaticity during dual-tasking (DT). Methods: This was a 4-week prospective intervention pilot study. The intervention uses a sensor system and algorithm that runs off the iPod Touch which calculates step height (SH) in real-time. These measurements were then used to trigger auditory (treatment group, music; control group, radio podcast) playback in real-time through wireless headphones upon maintenance of repeated large amplitude stepping. With small steps or shuffling, auditory playback stops, thus allowing participants to use anticipatory motor control to regain positive feedback. Eleven participants were recruited from an ongoing trial (Trial Number: ISRCTN06023392). Fear of falling (FES-I), general cognitive functioning (MoCA), self-reported freezing of gait (FOG-Q), and DT step automaticity were evaluated. Results: While we found no significant effect of training on FES-I, MoCA, or FOG-Q, we did observe a significant group (music vs podcast) by training interaction in DT step automaticity (P<0.01). Conclusion: Wearable device technology can be used to enable musically-contingent SIP training to increase motor automaticity for people living with PD. The training approach described here can be implemented at home to meet the growing demand for self-management of symptoms by patients. PMID:28151878

Optimal shifting control strategy in inertia phase of an automatic transmission for automotive applications

NASA Astrophysics Data System (ADS)

Meng, Fei; Tao, Gang; Zhang, Tao; Hu, Yihuai; Geng, Peng

2015-08-01

Shifting quality is a crucial factor in all parts of the automobile industry. To ensure an optimal gear shifting strategy with best fuel economy for a stepped automatic transmission, the controller should be designed to meet the challenge of lacking of a feedback sensor to measure the relevant variables. This paper focuses on a new kind of automatic transmission using proportional solenoid valve to control the clutch pressure, a speed difference of the clutch based control strategy is designed for the shift control during the inertia phase. First, the mechanical system is shown and the system dynamic model is built. Second, the control strategy is designed based on the characterization analysis of models which are derived from dynamics of the drive line and electro-hydraulic actuator. Then, the controller uses conventional Proportional-Integral-Derivative control theory, and a robust two-degree-of-freedom controller is also carried out to determine the optimal control parameters to further improve the system performance. Finally, the designed control strategy with different controller is implemented on a simulation model. The compared results show that the speed difference of clutch can track the desired trajectory well and improve the shift quality effectively.

Quality measurement and benchmarking of HPV vaccination services: a new approach.

PubMed

Maurici, Massimo; Paulon, Luca; Campolongo, Alessandra; Meleleo, Cristina; Carlino, Cristiana; Giordani, Alessandro; Perrelli, Fabrizio; Sgricia, Stefano; Ferrante, Maurizio; Franco, Elisabetta

2014-01-01

A new measurement process based upon a well-defined mathematical model was applied to evaluate the quality of human papillomavirus (HPV) vaccination centers in 3 of 12 Local Health Units (ASLs) within the Lazio Region of Italy. The quality aspects considered for evaluation were communicational efficiency, organizational efficiency and comfort. The overall maximum achievable value was 86.10%, while the HPV vaccination quality scores for ASL1, ASL2 and ASL3 were 73.07%, 71.08%, and 67.21%, respectively. With this new approach it is possible to represent the probabilistic reasoning of a stakeholder who evaluates the quality of a healthcare provider. All ASLs had margins for improvements and optimal quality results can be assessed in terms of better performance conditions, confirming the relationship between the resulting quality scores and HPV vaccination coverage. The measurement process was structured into three steps and involved four stakeholder categories: doctors, nurses, parents and vaccinated women. In Step 1, questionnaires were administered to collect different stakeholders' points of view (i.e., subjective data) that were elaborated to obtain the best and worst performance conditions when delivering a healthcare service. Step 2 of the process involved the gathering of performance data during the service delivery (i.e., objective data collection). Step 3 of the process involved the elaboration of all data: subjective data from step 1 are used to define a "standard" to test objective data from step 2. This entire process led to the creation of a set of scorecards. Benchmarking is presented as a result of the probabilistic meaning of the evaluated scores.

Triennial changes in groundwater quality in aquifers used for public supply in California: Utility as indicators of temporal trends

USGS Publications Warehouse

Kent, Robert; Landon, Matthew K.

2016-01-01

From 2004 to 2011, the U.S. Geological Survey collected samples from 1686 wells across the State of California as part of the California State Water Resources Control Board’s Groundwater Ambient Monitoring and Assessment (GAMA) Priority Basin Project (PBP). From 2007 to 2013, 224 of these wells were resampled to assess temporal trends in water quality. The samples were analyzed for 216 water-quality constituents, including inorganic and organic compounds as well as isotopic tracers. The resampled wells were grouped into five hydrogeologic zones. A nonparametric hypothesis test was used to test the differences between initial sampling and resampling results to evaluate possible step trends in water-quality, statewide, and within each hydrogeologic zone. The hypothesis tests were performed on the 79 constituents that were detected in more than 5 % of the samples collected during either sampling period in at least one hydrogeologic zone. Step trends were detected for 17 constituents. Increasing trends were detected for alkalinity, aluminum, beryllium, boron, lithium, orthophosphate, perchlorate, sodium, and specific conductance. Decreasing trends were detected for atrazine, cobalt, dissolved oxygen, lead, nickel, pH, simazine, and tritium. Tritium was expected to decrease due to decreasing values in precipitation, and the detection of decreases indicates that the method is capable of resolving temporal trends.

Noninferiority, randomized, controlled trial comparing embryo development using media developed for sequential or undisturbed culture in a time-lapse setup.

PubMed

Hardarson, Thorir; Bungum, Mona; Conaghan, Joe; Meintjes, Marius; Chantilis, Samuel J; Molnar, Laszlo; Gunnarsson, Kristina; Wikland, Matts

2015-12-01

To study whether a culture medium that allows undisturbed culture supports human embryo development to the blastocyst stage equivalently to a well-established sequential media. Randomized, double-blinded sibling trial. Independent in vitro fertilization (IVF) clinics. One hundred twenty-eight patients, with 1,356 zygotes randomized into two study arms. Embryos randomly allocated into two study arms to compare embryo development on a time-lapse system using a single-step medium or sequential media. Percentage of good-quality blastocysts on day 5. Percentage of day 5 good-quality blastocysts was 21.1% (standard deviation [SD] ± 21.6%) and 22.2% (SD ± 22.1%) in the single-step time-lapse medium (G-TL) and the sequential media (G-1/G-2) groups, respectively. The mean difference (-1.2; 95% CI, -6.0; 3.6) between the two media systems for the primary end point was less than the noninferiority margin of -8%. There was a statistically significantly lower number of good-quality embryos on day 3 in the G-TL group [50.7% (SD ± 30.6%) vs. 60.8% (SD ± 30.7%)]. Four out of the 11 measured morphokinetic parameters were statistically significantly different for the two media used. The mean levels of ammonium concentration in the media at the end of the culture period was statistically significantly lower in the G-TL group as compared with the G-2 group. We have shown that a single-step culture medium supports blastocyst development equivalently to established sequential media. The ammonium concentrations were lower in the single-step media, and the measured morphokinetic parameters were modified somewhat. NCT01939626. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Failure modes and effects analysis for ocular brachytherapy.

PubMed

Lee, Yongsook C; Kim, Yongbok; Huynh, Jason Wei-Yeong; Hamilton, Russell J

The aim of the study was to identify potential failure modes (FMs) having a high risk and to improve our current quality management (QM) program in Collaborative Ocular Melanoma Study (COMS) ocular brachytherapy by undertaking a failure modes and effects analysis (FMEA) and a fault tree analysis (FTA). Process mapping and FMEA were performed for COMS ocular brachytherapy. For all FMs identified in FMEA, risk priority numbers (RPNs) were determined by assigning and multiplying occurrence, severity, and lack of detectability values, each ranging from 1 to 10. FTA was performed for the major process that had the highest ranked FM. Twelve major processes, 121 sub-process steps, 188 potential FMs, and 209 possible causes were identified. For 188 FMs, RPN scores ranged from 1.0 to 236.1. The plaque assembly process had the highest ranked FM. The majority of FMs were attributable to human failure (85.6%), and medical physicist-related failures were the most numerous (58.9% of all causes). After FMEA, additional QM methods were included for the top 10 FMs and 6 FMs with severity values > 9.0. As a result, for these 16 FMs and the 5 major processes involved, quality control steps were increased from 8 (50%) to 15 (93.8%), and major processes having quality assurance steps were increased from 2 to 4. To reduce high risk in current clinical practice, we proposed QM methods. They mainly include a check or verification of procedures/steps and the use of checklists for both ophthalmology and radiation oncology staff, and intraoperative ultrasound-guided plaque positioning for ophthalmology staff. Copyright © 2017 American Brachytherapy Society. Published by Elsevier Inc. All rights reserved.

The braking force in walking: age-related differences and improvement in older adults with exergame training.

PubMed

Maillot, Pauline; Perrot, Alexandra; Hartley, Alan; Do, Manh-Cuong

2014-10-01

The purposes of this present research were, in the first study, to determine whether age impacts a measure of postural control (the braking force in walking) and, in a second study, to determine whether exergame training in physically-simulated sport activity would show transfer, increasing the braking force in walking and also improving balance assessed by clinical measures, functional fitness, and health-related quality of life in older adults. For the second study, the authors developed an active video game training program (using the Wii system) with a pretest-training-posttest design comparing an experimental group (24 1-hr sessions of training) with a control group. Participants completed a battery comprising balance (braking force in short and normal step conditions), functional fitness (Senior Fitness Test), and health-related quality of life (SF-36). Results show that 12 weeks of video game-based exercise program training improved the braking force in the normal step condition, along with the functional fitness of lower limb strength, cardiovascular endurance, and motor agility, as measured by the Senior Fitness Test. Only the global mental dimension of the SF-36 was sensitive to exergame practice. Exergames appear to be an effective way to train postural control in older adults. Because of the multimodal nature of the activity, exergames provide an effective tool for remediation of age-related problems.

Capacitor regenerative braking system of electric wheelchair for senior citizen based on variable frequency chopper control.

PubMed

Takahashi, Yoshiaki; Seki, Hirokazu

2009-01-01

This paper proposes a novel regenerative braking control system of electric wheelchairs for senior citizen. "Electric powered wheelchair", which generates the driving force by electric motors according to the human operation, is expected to be widely used as a mobility support system for elderly people. This study focuses on the braking control to realize the safety and smooth stopping motion using the regenerative braking control technique based on fuzzy algorithm. The ride quality improvement and energy recycling can be expected by the proposed control system with stopping distance estimation and variable frequency control on the step-up/down chopper type of capacitor regenerative circuit. Some driving experiments confirm the effectiveness of the proposed control system.

MOCVD Growth and Characterization of n-type Zinc Oxide Thin Films

NASA Astrophysics Data System (ADS)

Ben-Yaacov, Tammy

In the past decade, there has been widespread effort in the development of zinc oxide as a II-V1 semiconductor material. ZnO has potential advantages in optoelectronip device applications due to its unique electrical and optical properties. What stands out among these properties is its wide direct bandgap of 3.37 eV and its high electrical conductivity and transparency in the visible and near-UV regions of the spectrum. ZnO can be grown heteroepitaxially on GaN under near lattice-matched conditions and homoepitaxially as well, as high-quality bulk ZnO substrates are commercially available. This dissertation focuses on the development of the growth of high-quality, single crystal n-type ZnO films, control of n-type conductivity, as well as its application as a transparent contact material in GaN-based devices. The first part of this dissertation is an extensive heteroepitaxial and homoepitaxial growth study presenting the properties of ZnO(0001) layers grown on GaN(0001) templates and ZnO(0001) substrates. We show that deposition on GaN requires a two-step growth technique involving the growth of a low temperature nucleation layer before growing a high temperature epitaxial layer in order to obtain smooth ZnO films with excellent crystal quality and step-flow surface morphology. We obtained homoepitaxial ZnO(0001) films of structural quality and surface morphology that is comparable to the as-received substrates, and showed that a high growth temperature (≥1000°C) is needed in order to achieve step-flow growth mode. We performed n-type doping experiments, and established the conditions for which Indium effectively controls the n-type conductivity of ZnO films grown on GaN(0001) templates. A peak carrier concentration of 3.22x 10 19cm-3 and minimum sheet resistance of 97 O/square was achieved, while simultaneously maintaining good morphology and crystal quality. Finally, we present In-doped ZnO films implemented as p-contacts for GaN-based solar cells and LEDs, and we investigate the n-ZnO/p-GaN interface. We show that ZnO has potential as an effective p-contact for these devices, and determine properties that still need improvement in order for ZnO to compete with other contact materials. We also compare the device performance to metal-contacted devices. In summary, this thesis describes the growth of ZnO(0001) films by MOCVD, the progress in developing ZnO material with excellent surface morphology, high crystal quality, and controllable n-type doping, as well as its application to GaN-based optoelectronic devices as a p-contact material.

Integrated microreactor for enzymatic reaction automation: An easy step toward the quality control of monoclonal antibodies.

PubMed

Ladner, Yoann; Mas, Silvia; Coussot, Gaelle; Bartley, Killian; Montels, Jérôme; Morel, Jacques; Perrin, Catherine

2017-12-15

The main purpose of the present work is to provide a fully integrated miniaturized electrophoretic methodology in order to facilitate the quality control of monoclonal antibodies (mAbs). This methodology called D-PES, which stands for Diffusion-mediated Proteolysis combined with an Electrophoretic Separation, permits to perform subsequently mAb tryptic digestion and electrophoresis separation of proteolysis products in an automated manner. Tryptic digestion conditions were optimized regarding the influence of enzyme concentration and incubation time in order to achieve similar enzymatic digestion efficiency to that obtained with the classical methodology (off-line). Then, the optimization of electrophoretic separation conditions concerning the nature of background electrolyte (BGE), ionic strength and pH was realized. Successful and repeatable electrophoretic profiles of three mAbs digests (Trastuzumab, Infliximab and Tocilizumab), comparable to the off-line digestion profiles, were obtained demonstrating the feasibility and robustness of the proposed methodology. In summary, the use of the proposed and optimized in-line approach opens a new, fast and easy way for the quality control of mAbs. Copyright © 2017 Elsevier B.V. All rights reserved.

Strategies of performance self-monitoring in automotive production.

PubMed

Faye, Hélène; Falzon, Pierre

2009-09-01

Production in the automotive industry, based on assembly line work, is now characterized by lean manufacturing and customization. This results in greater flexibility and increased quality demands, including worker performance self-monitoring. The objectives of this study are to refine the concept of performance self-monitoring and to characterize the strategies developed by operators to achieve it. Data were collected based on the method of individual auto-confrontation, consisting of two steps: eleven assembly-line operators of a French automotive company were individually observed and video-taped while they were working; an interview then allowed each operator to discuss his/her activity based on the video-tape. This study expands the concept of performance self-monitoring by highlighting three types of strategies directly oriented toward quality: prevention, feedback control and control action strategies.

Criteria for Handling Qualities of Military Aircraft.

DTIC Science & Technology

1982-06-01

loop precognitive manner. The pilot is able to apply discrete, step-like inputs which more or less exactly produce the desired aircraft response. Some...While closed loop operation depends upon the frequency domain response characteristics, successful precognitive control requires the time domain...represents the other extreme of the pilot task from the precognitive time response situation. Mich work was done in attempting to predict pilot opinion from

Equilibrium moisture content during storage, manufacturing, and shipping of Bolivian wood products

Treesearch

Omar A. Espinoza; Brian H. Bond; Joseph R. Loferski

2007-01-01

After lumber is kiln-dried it is important to keep its moisture content (MC) as close as possible to its target value during all stages of production to assure final product quality. Knowledge of climate conditions at all stages of the manufacturing process is essential to provide a good control of lumber MC. This study is the first step to provide Bolivian companies...

Development of a real-time RT-PCR assay for squash mosaic virus useful for broad spectrum detection of various serotypes and its incorporation into a multiplex seed health assay

USDA-ARS?s Scientific Manuscript database

Seed-borne pathogens pose a serious threat to modern agricultural cropping systems as they can be disseminated to many geographical regions around the world. With trends of increasing global seed production and trade, seed-health testing is an important quality control step to prevent the introduct...

Effective Process Design for the Production of HIC-Resistant Linepipe Steels

NASA Astrophysics Data System (ADS)

Nieto, J.; Elías, T.; López, G.; Campos, G.; López, F.; Garcia, R.; De, Amar K.

2013-09-01

Production of slabs for sour service applications requires stringent control in slab internal quality and secondary processing so as to guarantee resistance against hydrogen-induced cracking (HIC). ArcelorMittal Steelmaking facility at Lazaro Cardenas, Mexico had recently implemented key steelmaking and casting processing technologies for production of sound, centerline free slabs for catering to the growing API Linepipe and off-shore market for sour service applications. State-of-the-art steelmaking with use of residual-free Direct-reduced Iron and continuous casting facilities with dynamic soft reduction were introduced for the production of slabs with ultra clean centerline. Introduction of controlled cooling of slabs for atomic hydrogen control well below 2 ppm has enabled production of slabs suitable for excellent HIC-resistant plate processing. Substantial tonnages of slabs were produced for production of API X52-X65 grade plates and pipes for sour service. Stringent quality control at each stage of steelmaking, casting, and slab inspection ensured slabs with excellent internal quality suitable for HIC resistance to be guaranteed in final product (Plates & Pipes). Details of production steps which resulted in successful HIC-resistant slab production have been described in this article.

Adaptive Data Processing Technique for Lidar-Assisted Control to Bridge the Gap between Lidar Systems and Wind Turbines: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schlipf, David; Raach, Steffen; Haizmann, Florian

2015-12-14

This paper presents first steps toward an adaptive lidar data processing technique crucial for lidar-assisted control in wind turbines. The prediction time and the quality of the wind preview from lidar measurements depend on several factors and are not constant. If the data processing is not continually adjusted, the benefit of lidar-assisted control cannot be fully exploited, or can even result in harmful control action. An online analysis of the lidar and turbine data are necessary to continually reassess the prediction time and lidar data quality. In this work, a structured process to develop an analysis tool for the predictionmore » time and a new hardware setup for lidar-assisted control are presented. The tool consists of an online estimation of the rotor effective wind speed from lidar and turbine data and the implementation of an online cross correlation to determine the time shift between both signals. Further, initial results from an ongoing campaign in which this system was employed for providing lidar preview for feed-forward pitch control are presented.« less

Surveillance Training for Ebola Preparedness in Côte d'Ivoire, Guinea-Bissau, Senegal, and Mali.

PubMed

Cáceres, Victor M; Sidibe, Sekou; Andre, McKenzie; Traicoff, Denise; Lambert, Stephanie; King, Melanie; Kazambu, Ditu; Lopez, Augusto; Pedalino, Biagio; Guibert, Dionisio J Herrera; Wassawa, Peter; Cardoso, Placido; Assi, Bernard; Ly, Alioune; Traore, Bouyagui; Angulo, Frederick J; Quick, Linda

2017-12-01

The 2014-2015 epidemic of Ebola virus disease in West Africa primarily affected Guinea, Liberia, and Sierra Leone. Several countries, including Mali, Nigeria, and Senegal, experienced Ebola importations. Realizing the importance of a trained field epidemiology workforce in neighboring countries to respond to Ebola importations, the Centers for Disease Control and Prevention Field Epidemiology Training Program unit implemented the Surveillance Training for Ebola Preparedness (STEP) initiative. STEP was a mentored, competency-based initiative to rapidly build up surveillance capacity along the borders of the at-risk neighboring countries Côte d'Ivoire, Mali, Senegal, and Guinea-Bissau. The target audience was district surveillance officers. STEP was delivered to 185 participants from 72 health units (districts or regions). Timeliness of reporting and the quality of surveillance analyses improved 3 months after training. STEP demonstrated that mentored, competency-based training, where learners attain competencies while delivering essential public health services, can be successfully implemented in an emergency response setting.

Evaluation of procedures for quality assurance specifications

DOT National Transportation Integrated Search

2004-10-01

The objective of this project was to develop a comprehensive quality assurance (QA) manual, supported by scientific evidence and statistical theory, which provides step-by-step procedures and instructions for developing effective and efficient QA spe...

Development of at-line assay to monitor charge variants of MAbs during production.

PubMed

St Amand, M M; Ogunnaike, B A; Robinson, A S

2014-01-01

One major challenge currently facing the biopharmaceutical industry is to understand how MAb microheterogeneity affects therapeutic efficacy, potency, immunogenicity, and clearance. MAb micro-heterogeneity can result from post-translational modifications such as sialylation, galactosylation, C-terminal lysine cleavage, glycine amidation, and tryptophan oxidation, each of which can generate MAb charge variants; such heterogeneity can affect pharmacokinetics (PK) considerably. Implementation of appropriate on-line quality control strategies may help to regulate bioprocesses, thus enabling more homogenous material with desired post-translational modifications and PK behavior. However, one major restriction to implementation of quality control strategies is the availability of techniques for obtaining on-line or at-line measurements of these attributes. In this work, we describe the development of an at-line assay to separate MAb charge variants in near real-time, which could ultimately be used to implement on-line quality control strategies for MAb production. The assay consists of a 2D-HPLC method with sequential in-line Protein A and WCX-10 HPLC column steps. To perform the 2D-HPLC assay at-line, the two columns steps were integrated into a single method using a novel system configuration that allowed parallel flow over column 1 or column 2 or sequential flow from column 1 to column 2. A bioreactor system was also developed such that media samples could be removed automatically from bioreactor vessels during production and delivered to the 2D-HPLC for analysis. With this at-line HPLC assay, we have demonstrated that MAb microheterogeneity occurs throughout the cell cycle whether the host cell line is grown under different or the same nominal culture conditions. © 2013 American Institute of Chemical Engineers.

Stepped Care to Optimize Pain care Effectiveness (SCOPE) trial study design and sample characteristics.

PubMed

Kroenke, Kurt; Krebs, Erin; Wu, Jingwei; Bair, Matthew J; Damush, Teresa; Chumbler, Neale; York, Tish; Weitlauf, Sharon; McCalley, Stephanie; Evans, Erica; Barnd, Jeffrey; Yu, Zhangsheng

2013-03-01

Pain is the most common physical symptom in primary care, accounting for an enormous burden in terms of patient suffering, quality of life, work and social disability, and health care and societal costs. Although collaborative care interventions are well-established for conditions such as depression, fewer systems-based interventions have been tested for chronic pain. This paper describes the study design and baseline characteristics of the enrolled sample for the Stepped Care to Optimize Pain care Effectiveness (SCOPE) study, a randomized clinical effectiveness trial conducted in five primary care clinics. SCOPE has enrolled 250 primary care veterans with persistent (3 months or longer) musculoskeletal pain of moderate severity and randomized them to either the stepped care intervention or usual care control group. Using a telemedicine collaborative care approach, the intervention couples automated symptom monitoring with a telephone-based, nurse care manager/physician pain specialist team to treat pain. The goal is to optimize analgesic management using a stepped care approach to drug selection, symptom monitoring, dose adjustment, and switching or adding medications. All subjects undergo comprehensive outcome assessments at baseline, 1, 3, 6 and 12 months by interviewers blinded to treatment group. The primary outcome is pain severity/disability, and secondary outcomes include pain beliefs and behaviors, psychological functioning, health-related quality of life and treatment satisfaction. Innovations of SCOPE include optimized analgesic management (including a stepped care approach, opioid risk stratification, and criteria-based medication adjustment), automated monitoring, and centralized care management that can cover multiple primary care practices. Published by Elsevier Inc.

Control of separation and quantitative analysis by GC-FTIR

NASA Astrophysics Data System (ADS)

Semmoud, A.; Huvenne, Jean P.; Legrand, P.

1992-03-01

Software for 3-D representations of the 'Absorbance-Wavenumber-Retention time' is used to control the quality of the GC separation. Spectral information given by the FTIR detection allows the user to be sure that a chromatographic peak is 'pure.' The analysis of peppermint essential oil is presented as an example. This assurance is absolutely required for quantitative applications. In these conditions, we have worked out a quantitative analysis of caffeine. Correlation coefficients between integrated absorbance measurements and concentration of caffeine are discussed at two steps of the data treatment.

Control of infection in an international airline.

PubMed

Kelly, M

1993-05-01

The paper examines the possible sources of infection on an international aircraft, including the provision of food, the supply of drinking water, and the removal of waste. It considers aspects of control, and explains some of the steps which have to be taken by a major international carrier to ensure that the high quality expected by the customer is provided in all areas of the world, even those where natural resources and expertise may be limited. The emphasis is on providing a safe product, and removing any possible risk of infection of the passengers.

Validity and Reliability of Accelerometers in Patients With COPD: A SYSTEMATIC REVIEW.

PubMed

Gore, Shweta; Blackwood, Jennifer; Guyette, Mary; Alsalaheen, Bara

2018-05-01

Reduced physical activity is associated with poor prognosis in chronic obstructive pulmonary disease (COPD). Accelerometers have greatly improved quantification of physical activity by providing information on step counts, body positions, energy expenditure, and magnitude of force. The purpose of this systematic review was to compare the validity and reliability of accelerometers used in patients with COPD. An electronic database search of MEDLINE and CINAHL was performed. Study quality was assessed with the Strengthening the Reporting of Observational Studies in Epidemiology checklist while methodological quality was assessed using the modified Quality Appraisal Tool for Reliability Studies. The search yielded 5392 studies; 25 met inclusion criteria. The SenseWear Pro armband reported high criterion validity under controlled conditions (r = 0.75-0.93) and high reliability (ICC = 0.84-0.86) for step counts. The DynaPort MiniMod demonstrated highest concurrent validity for step count using both video and manual methods. Validity of the SenseWear Pro armband varied between studies especially in free-living conditions, slower walking speeds, and with addition of weights during gait. A high degree of variability was found in the outcomes used and statistical analyses performed between studies, indicating a need for further studies to measure reliability and validity of accelerometers in COPD. The SenseWear Pro armband is the most commonly used accelerometer in COPD, but measurement properties are limited by gait speed variability and assistive device use. DynaPort MiniMod and Stepwatch accelerometers demonstrated high validity in patients with COPD but lack reliability data.

Inverse simulation system for evaluating handling qualities during rendezvous and docking

NASA Astrophysics Data System (ADS)

Zhou, Wanmeng; Wang, Hua; Thomson, Douglas; Tang, Guojin; Zhang, Fan

2017-08-01

The traditional method used for handling qualities assessment of manned space vehicles is too time-consuming to meet the requirements of an increasingly fast design process. In this study, a rendezvous and docking inverse simulation system to assess the handling qualities of spacecraft is proposed using a previously developed model-predictive-control architecture. By considering the fixed discrete force of the thrusters of the system, the inverse model is constructed using the least squares estimation method with a hyper-ellipsoidal restriction, the continuous control outputs of which are subsequently dispersed by pulse width modulation with sensitivity factors introduced. The inputs in every step are deemed constant parameters, and the method could be considered as a general method for solving nominal, redundant, and insufficient inverse problems. The rendezvous and docking inverse simulation is applied to a nine-degrees-of-freedom platform, and a novel handling qualities evaluation scheme is established according to the operation precision and astronauts' workload. Finally, different nominal trajectories are scored by the inverse simulation and an established evaluation scheme. The scores can offer theoretical guidance for astronaut training and more complex operation missions.

[The Scope, Quality and Safety Requirements of Drug Abuse Testing].

PubMed

Küme, Tuncay; Karakükcü, Çiğdem; Pınar, Aslı; Coşkunol, Hakan

2017-01-01

The aim of this review is to inform about the scopes and requirements of drug abuse testing. Drug abuse testing is one of the tools for determination of drug use. It must fulfill the quality and safety requirements in judgmental legal and administrative decisions. Drug abuse testing must fulfill some requirements like selection of the appropriate test matrix, appropriate screening test panel, sampling in detection window, patient consent, identification of the donor, appropriate collection site, sample collection with observation, identification and control of the sample, specimen custody chain in preanalytical phase; analysis in authorized laboratories, specimen validity tests, reliable testing METHODS, strict quality control, two-step analysis in analytical phase; storage of the split specimen, confirmation of the split specimen in the objection, result custody chain, appropriate cut-off concentration, the appropriate interpretation of the result in postanalytical phase. The workflow and analytical processes of drug abuse testing are explained in last regulation of the Department of Medical Laboratory Services, Ministry of Health in Turkey. The clinical physicians have to know and apply the quality and safety requirements in drug abuse testing according to last regulations in Turkey.

Fish welfare assurance system: initial steps to set up an effective tool to safeguard and monitor farmed fish welfare at a company level.

PubMed

van de Vis, J W; Poelman, M; Lambooij, E; Bégout, M-L; Pilarczyk, M

2012-02-01

The objective was to take a first step in the development of a process-oriented quality assurance (QA) system for monitoring and safeguarding of fish welfare at a company level. A process-oriented approach is focused on preventing hazards and involves establishment of critical steps in a process that requires careful control. The seven principles of the Hazard Analysis Critical Control Points (HACCP) concept were used as a framework to establish the QA system. HACCP is an internationally agreed approach for management of food safety, which was adapted for the purpose of safeguarding and monitoring the welfare of farmed fish. As the main focus of this QA system is farmed fish welfare assurance at a company level, it was named Fish Welfare Assurance System (FWAS). In this paper we present the initial steps of setting up FWAS for on growing of sea bass (Dicentrarchus labrax), carp (Cyprinus carpio) and European eel (Anguilla anguilla). Four major hazards were selected, which were fish species dependent. Critical Control Points (CCPs) that need to be controlled to minimize or avoid the four hazards are presented. For FWAS, monitoring of CCPs at a farm level is essential. For monitoring purposes, Operational Welfare Indicators (OWIs) are needed to establish whether critical biotic, abiotic, managerial and environmental factors are controlled. For the OWIs we present critical limits/target values. A critical limit is the maximum or minimum value to which a factor must be controlled at a critical control point to prevent, eliminate or reduce a hazard to an acceptable level. For managerial factors target levels are more appropriate than critical limits. Regarding the international trade of farmed fish products, we propose that FWAS needs to be standardized in aquaculture chains. For this standardization a consensus on the concept of fish welfare, methods to assess welfare objectively and knowledge on the needs of farmed fish are required.

Instrumentation for studying binder burnout in an immobilized plutonium ceramic wasteform

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mitchell, M; Pugh, D; Herman, C

The Plutonium Immobilization Program produces a ceramic wasteform that utilizes organic binders. Several techniques and instruments were developed to study binder burnout on full size ceramic samples in a production environment. This approach provides a method for developing process parameters on production scale to optimize throughput, product quality, offgas behavior, and plant emissions. These instruments allow for offgas analysis, large-scale TGA, product quality observation, and thermal modeling. Using these tools, results from lab-scale techniques such as laser dilametry studies and traditional TGA/DTA analysis can be integrated. Often, the sintering step of a ceramification process is the limiting process step thatmore » controls the production throughput. Therefore, optimization of sintering behavior is important for overall process success. Furthermore, the capabilities of this instrumentation allows better understanding of plant emissions of key gases: volatile organic compounds (VOCs), volatile inorganics including some halide compounds, NO{sub x}, SO{sub x}, carbon dioxide, and carbon monoxide.« less

RNA-seq Data: Challenges in and Recommendations for Experimental Design and Analysis.

PubMed

Williams, Alexander G; Thomas, Sean; Wyman, Stacia K; Holloway, Alisha K

2014-10-01

RNA-seq is widely used to determine differential expression of genes or transcripts as well as identify novel transcripts, identify allele-specific expression, and precisely measure translation of transcripts. Thoughtful experimental design and choice of analysis tools are critical to ensure high-quality data and interpretable results. Important considerations for experimental design include number of replicates, whether to collect paired-end or single-end reads, sequence length, and sequencing depth. Common analysis steps in all RNA-seq experiments include quality control, read alignment, assigning reads to genes or transcripts, and estimating gene or transcript abundance. Our aims are two-fold: to make recommendations for common components of experimental design and assess tool capabilities for each of these steps. We also test tools designed to detect differential expression, since this is the most widespread application of RNA-seq. We hope that these analyses will help guide those who are new to RNA-seq and will generate discussion about remaining needs for tool improvement and development. Copyright © 2014 John Wiley & Sons, Inc.

Continuous counter-current chromatography for capture and polishing steps in biopharmaceutical production.

PubMed

Steinebach, Fabian; Müller-Späth, Thomas; Morbidelli, Massimo

2016-09-01

The economic advantages of continuous processing of biopharmaceuticals, which include smaller equipment and faster, efficient processes, have increased interest in this technology over the past decade. Continuous processes can also improve quality assurance and enable greater controllability, consistent with the quality initiatives of the FDA. Here, we discuss different continuous multi-column chromatography processes. Differences in the capture and polishing steps result in two different types of continuous processes that employ counter-current column movement. Continuous-capture processes are associated with increased productivity per cycle and decreased buffer consumption, whereas the typical purity-yield trade-off of classical batch chromatography can be surmounted by continuous processes for polishing applications. In the context of continuous manufacturing, different but complementary chromatographic columns or devices are typically combined to improve overall process performance and avoid unnecessary product storage. In the following, these various processes, their performances compared with batch processing and resulting product quality are discussed based on a review of the literature. Based on various examples of applications, primarily monoclonal antibody production processes, conclusions are drawn about the future of these continuous-manufacturing technologies. Copyright © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Developing questionnaires for educational research: AMEE Guide No. 87

PubMed Central

La Rochelle, Jeffrey S.; Dezee, Kent J.; Gehlbach, Hunter

2014-01-01

In this AMEE Guide, we consider the design and development of self-administered surveys, commonly called questionnaires. Questionnaires are widely employed in medical education research. Unfortunately, the processes used to develop such questionnaires vary in quality and lack consistent, rigorous standards. Consequently, the quality of the questionnaires used in medical education research is highly variable. To address this problem, this AMEE Guide presents a systematic, seven-step process for designing high-quality questionnaires, with particular emphasis on developing survey scales. These seven steps do not address all aspects of survey design, nor do they represent the only way to develop a high-quality questionnaire. Instead, these steps synthesize multiple survey design techniques and organize them into a cohesive process for questionnaire developers of all levels. Addressing each of these steps systematically will improve the probabilities that survey designers will accurately measure what they intend to measure. PMID:24661014

Developing questionnaires for educational research: AMEE Guide No. 87.

PubMed

Artino, Anthony R; La Rochelle, Jeffrey S; Dezee, Kent J; Gehlbach, Hunter

2014-06-01

In this AMEE Guide, we consider the design and development of self-administered surveys, commonly called questionnaires. Questionnaires are widely employed in medical education research. Unfortunately, the processes used to develop such questionnaires vary in quality and lack consistent, rigorous standards. Consequently, the quality of the questionnaires used in medical education research is highly variable. To address this problem, this AMEE Guide presents a systematic, seven-step process for designing high-quality questionnaires, with particular emphasis on developing survey scales. These seven steps do not address all aspects of survey design, nor do they represent the only way to develop a high-quality questionnaire. Instead, these steps synthesize multiple survey design techniques and organize them into a cohesive process for questionnaire developers of all levels. Addressing each of these steps systematically will improve the probabilities that survey designers will accurately measure what they intend to measure.

Differences in the daily activity of patients with diabetic foot ulcers compared to controls in their free-living environments.

PubMed

Sheahan, Helen; Canning, Kimberley; Refausse, Nishka; Kinnear, Ewan M; Jorgensen, Greg; Walsh, James R; Lazzarini, Peter A

2017-12-01

The aims of our study were to investigate multiple daily activity outcomes in patients with diabetic foot ulcers (DFU) compared to diabetic peripheral neuropathy (DPN) and diabetes (DM) controls in their free-living environments. We examined daily activity outcomes of 30 patients with DFU, 23 DPN and 20 DM. All patients wore a validated multi-sensor device for > 5 days (>22 hours per day) to measure their daily activity outcomes: steps, energy expenditure (kJ), average metabolic equivalent tasks (METs), physical activity (>3·0 METs) duration and energy expenditure, lying duration, sleep duration and sleep quality. We found that DFU patients recorded fewer median (interquartile ranges, IQR) daily steps [2154 (1621-4324)] than DPN [3660 (2742-7705)] and DM [5102 (4011-7408)] controls (P < 0·05). In contrast, DFU patients recorded more mean ± SD daily energy expenditure (kJ) (13 006 ± 3559) than DPN (11 085 ± 1876) and DM (11 491 ± 1559) controls (P < 0·05). We found no other differences in daily activity outcomes (P > 0·1). We conclude that DFU patients typically take fewer steps but expend more energy during their normal daily activity than DPN and DM controls. We hypothesise that the increased energy expenditure for DFU patients may be due to wound healing or an inefficient gait strategy. Further investigations into this energy imbalance in DFU patients may improve healing in future. © 2017 Medicalhelplines.com Inc and John Wiley & Sons Ltd.

Vermont STep Ahead Recognition System: QRS Profile. The Child Care Quality Rating System (QRS) Assessment

ERIC Educational Resources Information Center

Child Trends, 2010

2010-01-01

This paper presents a profile of Vermont's STep Ahead Recognition System (STARS) prepared as part of the Child Care Quality Rating System (QRS) Assessment Study. The profile consists of several sections and their corresponding descriptions including: (1) Program Information; (2) Rating Details; (3) Quality Indicators for All Child Care Programs;…

The development, implementation and evaluation of clinical pathways for chronic obstructive pulmonary disease (COPD) in Saskatchewan: protocol for an interrupted times series evaluation.

PubMed

Rotter, Thomas; Plishka, Christopher; Hansia, Mohammed Rashaad; Goodridge, Donna; Penz, Erika; Kinsman, Leigh; Lawal, Adegboyega; O'Quinn, Sheryl; Buchan, Nancy; Comfort, Patricia; Patel, Prakesh; Anderson, Sheila; Winkel, Tanya; Lang, Rae Lynn; Marciniuk, Darcy D

2017-11-28

Chronic obstructive pulmonary disease (COPD) has substantial economic and human costs; it is expected to be the third leading cause of death worldwide by 2030. To minimize these costs high quality guidelines have been developed. However, guidelines alone rarely result in meaningful change. One method of integrating guidelines into practice is the use of clinical pathways (CPWs). CPWs bring available evidence to a range of healthcare professionals by detailing the essential steps in care and adapting guidelines to the local context. We are working with local stakeholders to develop CPWs for COPD with the aims of improving care while reducing utilization. The CPWs will employ several steps including: standardizing diagnostic training, unifying components of chronic disease care, coordinating education and reconditioning programs, and ensuring care uses best practices. Further, we have worked to identify evidence-informed implementation strategies which will be tailored to the local context. We will conduct a three-year research project using an interrupted time series (ITS) design in the form of a multiple baseline approach with control groups. The CPW will be implemented in two health regions (experimental groups) and two health regions will act as controls (control groups). The experimental and control groups will each contain an urban and rural health region. Primary outcomes for the study will be quality of care operationalized using hospital readmission rates and emergency department (ED) presentation rates. Secondary outcomes will be healthcare utilization and guideline adherence, operationalized using hospital admission rates, hospital length of stay and general practitioner (GP) visits. Results will be analyzed using segmented regression analysis. Funding has been procured from multiple stakeholders. The project has been deemed exempt from ethics review as it is a quality improvement project. Intervention implementation is expected to begin in summer of 2017. This project is expected to improve quality of care and reduce healthcare utilization. In addition it will provide evidence on the effects of CPWs in both urban and rural settings. If the CPWs are found effective we will work with all stakeholders to implement similar CPWs in surrounding health regions. Clinicaltrials.gov ( NCT03075709 ). Registered 8 March 2017.

From raw material to dish: pasta quality step by step.

PubMed

Sicignano, Angelo; Di Monaco, Rossella; Masi, Paolo; Cavella, Silvana

2015-10-01

Pasta is a traditional Italian cereal-based food that is popular worldwide because of its convenience, versatility, sensory and nutritional value. The aim of this review is to present a step-by-step guide to facilitate the understanding of the most important events that can affect pasta characteristics, directing the reader to the appropriate production steps. Owing to its unique flavor, color, composition and rheological properties, durum wheat semolina is the best raw material for pasta production. Although pasta is traditionally made from only two ingredients, sensory quality and chemical/physical characteristics of the final product may vary greatly. Starting from the same ingredients, there are a lot of different events in each step of pasta production that can result in the development of varieties of pasta with different characteristics. In particular, numerous studies have demonstrated the importance of temperature and humidity conditions of the pasta drying operation as well as the significance of the choice of raw material and operating conditions on pasta quality. © 2015 Society of Chemical Industry.

Contour scanning of textile preforms using a light-section sensor for the automated manufacturing of fibre-reinforced plastics

NASA Astrophysics Data System (ADS)

Schmitt, R.; Niggemann, C.; Mersmann, C.

2008-04-01

Fibre-reinforced plastics (FRP) are particularly suitable for components where light-weight structures with advanced mechanical properties are required, e.g. for aerospace parts. Nevertheless, many manufacturing processes for FRP include manual production steps without an integrated quality control. A vital step in the process chain is the lay-up of the textile preform, as it greatly affects the geometry and the mechanical performance of the final part. In order to automate the FRP production, an inline machine vision system is needed for a closed-loop control of the preform lay-up. This work describes the development of a novel laser light-section sensor for optical inspection of textile preforms and its integration and validation in a machine vision prototype. The proposed method aims at the determination of the contour position of each textile layer through edge scanning. The scanning route is automatically derived by using texture analysis algorithms in a preliminary step. As sensor output a distinct stage profile is computed from the acquired greyscale image. The contour position is determined with sub-pixel accuracy using a novel algorithm based on a non-linear least-square fitting to a sigmoid function. The whole contour position is generated through data fusion of the measured edge points. The proposed method provides robust process automation for the FRP production improving the process quality and reducing the scrap quota. Hence, the range of economically feasible FRP products can be increased and new market segments with cost sensitive products can be addressed.

IMAT graphics manual

NASA Technical Reports Server (NTRS)

Stockwell, Alan E.; Cooper, Paul A.

1991-01-01

The Integrated Multidisciplinary Analysis Tool (IMAT) consists of a menu driven executive system coupled with a relational database which links commercial structures, structural dynamics and control codes. The IMAT graphics system, a key element of the software, provides a common interface for storing, retrieving, and displaying graphical information. The IMAT Graphics Manual shows users of commercial analysis codes (MATRIXx, MSC/NASTRAN and I-DEAS) how to use the IMAT graphics system to obtain high quality graphical output using familiar plotting procedures. The manual explains the key features of the IMAT graphics system, illustrates their use with simple step-by-step examples, and provides a reference for users who wish to take advantage of the flexibility of the software to customize their own applications.

Effects of foot and ankle devices on balance, gait and falls in adults with sensory perception loss: a systematic review

PubMed Central

Paton, Joanne; Hatton, Anna L.; Rome, Keith; Kent, Bridie

2016-01-01

EXECUTIVE SUMMARY Background Foot and ankle devices are being developed as a method of preventing people with sensory perception loss sustaining a fall. Such devices are believed to work by reducing the likelihood of a fall by improving the balance and gait of the user. Objectives The objective of the review was to evaluate the effectiveness of foot and ankle devices for the prevention of falls and the improvement of balance and gait in adults with sensory perception loss. Inclusion criteria Types of participants Participants were community-dwelling adults with bilateral pathological sensory perception loss. Types of intervention(s)/phenomena of interest The current review evaluated any foot or ankle device, including but not restricted to, all types of footwear (therapeutic and retail), insoles (customized and prefabricated) and ankle-foot orthoses (AFOs). Types of studies In the absence of randomized controlled trials (RCT), the review considered experimental and epidemiological study designs, except case series, individual case reports and descriptive cross-sectional studies. Outcomes The primary outcome was number of falls. Secondary outcome measures were clinical or laboratory measures of balance or gait. Search strategy A search for published and unpublished literature from inception to March 2015 written in the English language was conducted across a number of major electronic databases. A three-step search strategy was developed using MeSH terminology and keywords to ensure all that relevant materials are captured. Methodological quality Methodological quality of included studies was assessed by two reviewers, who appraised each study independently, using standardized Joanna Briggs Institute (JBI) critical appraisal tools. Data extraction Quantitative data were extracted from the studies that were identified as meeting the criteria for methodological quality using the standardized JBI data extraction tools. Data synthesis Due to the heterogeneity of populations, interventions and outcome measures, meta-analyses were not possible and results are presented in narrative form. Results Nine trials (from 10 papers) involving 238 participants, (14 with multiple sclerosis and 16 with idiopathic peripheral neuropathy, 150 with diabetic neuropathy) and 58 controls were included in the review. No study reported falls as an outcome measure. The results of the included studies found that in people with sensory perception loss, postural sway improved with vibrating insoles and AFO, altering the softness and texture of the top cover had no effect on postural sway, wearing footwear over long distances or AFOs improved step-to-step consistency, and no foot and ankle device was reported to have a negative effect on the balance or gait of people with sensory perception loss. The methodological quality of the included studies was poor. No study used a randomized controlled trial (RCT) methodology. No study incorporated a follow-up period or tested the intervention within the context of the intended clinical environment. Conclusion There is limited evidence to suggest that footwear and insole devices can artificially alter postural stability and may reduce the step-to-step variability in adults with sensory perception loss. Varying the material properties of an insole does not notably affect static balance or gait. PMID:28009675

Evaluation of stormwater micropollutant source control and end-of-pipe control strategies using an uncertainty-calibrated integrated dynamic simulation model.

PubMed

Vezzaro, L; Sharma, A K; Ledin, A; Mikkelsen, P S

2015-03-15

The estimation of micropollutant (MP) fluxes in stormwater systems is a fundamental prerequisite when preparing strategies to reduce stormwater MP discharges to natural waters. Dynamic integrated models can be important tools in this step, as they can be used to integrate the limited data provided by monitoring campaigns and to evaluate the performance of different strategies based on model simulation results. This study presents an example where six different control strategies, including both source-control and end-of-pipe treatment, were compared. The comparison focused on fluxes of heavy metals (copper, zinc) and organic compounds (fluoranthene). MP fluxes were estimated by using an integrated dynamic model, in combination with stormwater quality measurements. MP sources were identified by using GIS land usage data, runoff quality was simulated by using a conceptual accumulation/washoff model, and a stormwater retention pond was simulated by using a dynamic treatment model based on MP inherent properties. Uncertainty in the results was estimated with a pseudo-Bayesian method. Despite the great uncertainty in the MP fluxes estimated by the runoff quality model, it was possible to compare the six scenarios in terms of discharged MP fluxes, compliance with water quality criteria, and sediment accumulation. Source-control strategies obtained better results in terms of reduction of MP emissions, but all the simulated strategies failed in fulfilling the criteria based on emission limit values. The results presented in this study shows how the efficiency of MP pollution control strategies can be quantified by combining advanced modeling tools (integrated stormwater quality model, uncertainty calibration). Copyright © 2014 Elsevier Ltd. All rights reserved.

Smear layer-deproteinizing improves bonding of one-step self-etch adhesives to dentin.

PubMed

Thanatvarakorn, Ornnicha; Prasansuttiporn, Taweesak; Thittaweerat, Suppason; Foxton, Richard M; Ichinose, Shizuko; Tagami, Junji; Hosaka, Keiichi; Nakajima, Masatoshi

2018-03-01

Smear layer deproteinizing was proved to reduce the organic phase of smear layer covered on dentin surface. It was shown to eliminate hybridized smear layer and nanoleakage expression in resin-dentin bonding interface of two-step self-etch adhesive. This study aimed to investigate those effects on various one-step self-etch adhesives. Four different one-step self-etch adhesives were used in this study; SE One (SE), Scotchbond™ Universal (SU), BeautiBond Multi (BB), and Bond Force (BF). Flat human dentin surfaces with standardized smear layer were prepared. Smear layer deproteinizing was carried out by the application of 50ppm hypochlorous acid (HOCl) on dentin surface for 15s followed by Accel ® (p-toluenesulfinic acid salt) for 5s prior to adhesive application. No surface pretreatment was used as control. Microtensile bond strength (μTBS) and nanoleakage under TEM observation were investigated. The data were analyzed by two-way ANOVA and Tukey's post-hoc test and t-test at the significant level of 0.05. Smear layer deproteinizing significantly improved μTBS of SE, SU, and BB (p<0.001). Hybridized smear layer observed in control groups of SE, BB, and BF, and reticular nanoleakage presented throughout the hybridized complex in control groups of BB and BF were eliminated upon the smear layer deproteinizing. Smear layer deproteinizing by HOCl and Accel ® application could enhance the quality of dentin for bonding to one-step self-etch adhesives, resulting in the improving μTBS, eliminating hybridized smear layer and preventing reticular nanoleakage formation in resin-dentin bonding interface. Copyright © 2018 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

An Automatic Quality Control Pipeline for High-Throughput Screening Hit Identification.

PubMed

Zhai, Yufeng; Chen, Kaisheng; Zhong, Yang; Zhou, Bin; Ainscow, Edward; Wu, Ying-Ta; Zhou, Yingyao

2016-09-01

The correction or removal of signal errors in high-throughput screening (HTS) data is critical to the identification of high-quality lead candidates. Although a number of strategies have been previously developed to correct systematic errors and to remove screening artifacts, they are not universally effective and still require fair amount of human intervention. We introduce a fully automated quality control (QC) pipeline that can correct generic interplate systematic errors and remove intraplate random artifacts. The new pipeline was first applied to ~100 large-scale historical HTS assays; in silico analysis showed auto-QC led to a noticeably stronger structure-activity relationship. The method was further tested in several independent HTS runs, where QC results were sampled for experimental validation. Significantly increased hit confirmation rates were obtained after the QC steps, confirming that the proposed method was effective in enriching true-positive hits. An implementation of the algorithm is available to the screening community. © 2016 Society for Laboratory Automation and Screening.

Socioeconomic, Family, and Pediatric Practice Factors Affecting the Level of Asthma Control

PubMed Central

Bloomberg, Gordon R; Banister, Christina; Sterkel, Randall; Epstein, Jay; Bruns, Julie; Swerczek, Lisa; Wells, Suzanne; Yan, Yan; Garbutt, Jane M

2008-01-01

Background Multiple issues bear on effective control of childhood asthma. Objective To identify factors related to the level of asthma control in children receiving asthma care from community pediatricians. Patients and Methods Data for 362 children participating in an intervention study to reduce asthma morbidity were collected by telephone administered questionnaire. Level of asthma control (“well controlled,” partially controlled,” or “poorly controlled”) was derived from measures of recent impairment (symptoms, activity limitations, albuterol use) and the number of exacerbations in a 12 month period. Data also included demographic characteristics, asthma-related quality of life, pediatric management practices, and medication usage. Univariable and multivariable analyses were used to identify factors associated with poor asthma control and to explore the relationship between control and use of daily controller medications. Results Asthma was “well controlled” for 24% of children, “partially controlled” for 20%, and “poorly controlled” for 56%. Medicaid insurance (p=0.016), the presence of another family member with asthma (p=0.0168), and outside the home maternal employment, (p=0.025), were significant univariable factors associated with poor asthma control. Medicaid insurance had an independent association with poor control (OR 0.49, 95% CI 0.28-0.9). Seventy-six percent of children were reported by parents as receiving a daily controller medication. Comparison of guidelines recommended controller medication with level of control indicated that a higher step level of medication would have been appropriate for 74% of these children. Significantly lower overall quality of life scores were observed in both parents and children with poor control. (ANOVA, p<0.05) Conclusion Despite substantial use of daily controller medication, children with asthma continue to experience poorly controlled asthma and reduced quality of life. While Medicaid insurance and aspects of family structure are significant factors associated with poorly controlled asthma, attention to medication use and quality of life indicators may further reduce morbidity. PMID:19255010

Automatic retinal interest evaluation system (ARIES).

PubMed

Yin, Fengshou; Wong, Damon Wing Kee; Yow, Ai Ping; Lee, Beng Hai; Quan, Ying; Zhang, Zhuo; Gopalakrishnan, Kavitha; Li, Ruoying; Liu, Jiang

2014-01-01

In recent years, there has been increasing interest in the use of automatic computer-based systems for the detection of eye diseases such as glaucoma, age-related macular degeneration and diabetic retinopathy. However, in practice, retinal image quality is a big concern as automatic systems without consideration of degraded image quality will likely generate unreliable results. In this paper, an automatic retinal image quality assessment system (ARIES) is introduced to assess both image quality of the whole image and focal regions of interest. ARIES achieves 99.54% accuracy in distinguishing fundus images from other types of images through a retinal image identification step in a dataset of 35342 images. The system employs high level image quality measures (HIQM) to perform image quality assessment, and achieves areas under curve (AUCs) of 0.958 and 0.987 for whole image and optic disk region respectively in a testing dataset of 370 images. ARIES acts as a form of automatic quality control which ensures good quality images are used for processing, and can also be used to alert operators of poor quality images at the time of acquisition.

Current standards for infection control: audit assures compliance.

PubMed

Flanagan, Pauline

Having robust policies and procedures in place for infection control is fundamentally important. However, each organization has to go a step beyond this; evidence has to be provided that these policies and procedures are followed. As of 1 April 2009, with the introduction of the Care Quality Commission and The Health and Social Care Act 2008 Code of Practice for the NHS on the Prevention and Control of Healthcare-Associated Infections and Related Guidance, the assurance of robust infection control measures within any UK provider of health care became an even higher priority. Also, the commissioning of any service by the NHS must provide evidence that the provider has in place robust procedures for infection control. This article demonstrates how the clinical audit team at the Douglas Macmillan Hospice in North Staffordshire, UK, have used audit to assure high rates of compliance with the current national standards for infection control. Prior to the audit, hospice staff had assumed that the rates of compliance for infection control approached 100%. This article shows that a good quality audit tool can be used to identify areas of shortfall in infection control and the effectiveness of putting in place an action plan followed by re-audit.

Blastocyst utilization rates after continuous culture in two commercial single-step media: a prospective randomized study with sibling oocytes.

PubMed

Sfontouris, Ioannis A; Kolibianakis, Efstratios M; Lainas, George T; Venetis, Christos A; Petsas, George K; Tarlatzis, Basil C; Lainas, Tryfon G

2017-10-01

The aim of this study is to determine whether blastocyst utilization rates are different after continuous culture in two different commercial single-step media. This is a paired randomized controlled trial with sibling oocytes conducted in infertility patients, aged ≤40 years with ≥10 oocytes retrieved assigned to blastocyst culture and transfer. Retrieved oocytes were randomly allocated to continuous culture in either Sage one-step medium (Origio) or Continuous Single Culture (CSC) medium (Irvine Scientific) without medium renewal up to day 5 post oocyte retrieval. Main outcome measure was the proportion of embryos suitable for clinical use (utilization rate). A total of 502 oocytes from 33 women were randomly allocated to continuous culture in either Sage one-step medium (n = 250) or CSC medium (n = 252). Fertilization was performed by either in vitro fertilization or intracytoplasmic sperm injection, and embryo transfers were performed on day 5. Two patients had all blastocysts frozen due to the occurrence of severe ovarian hyperstimulation syndrome. Fertilization and cleavage rates, as well as embryo quality on day 3, were similar in the two media. Blastocyst utilization rates (%, 95% CI) [55.4% (46.4-64.1) vs 54.7% (44.9-64.6), p = 0.717], blastocyst formation rates [53.6% (44.6-62.5) vs 51.9 (42.2-61.6), p = 0.755], and proportion of good quality blastocysts [36.8% (28.1-45.4) vs 36.1% (27.2-45.0), p = 0.850] were similar in Sage one-step and CSC media, respectively. Continuous culture of embryos in Sage one-step and CSC media is associated with similar blastocyst development and utilization rates. Both single-step media appear to provide adequate support during in vitro preimplantation embryo development. Whether these observations are also valid for other continuous single medium protocols remains to be determined. NCT02302638.

A Vehicle Active Safety Model: Vehicle Speed Control Based on Driver Vigilance Detection Using Wearable EEG and Sparse Representation.

PubMed

Zhang, Zutao; Luo, Dianyuan; Rasim, Yagubov; Li, Yanjun; Meng, Guanjun; Xu, Jian; Wang, Chunbai

2016-02-19

In this paper, we present a vehicle active safety model for vehicle speed control based on driver vigilance detection using low-cost, comfortable, wearable electroencephalographic (EEG) sensors and sparse representation. The proposed system consists of three main steps, namely wireless wearable EEG collection, driver vigilance detection, and vehicle speed control strategy. First of all, a homemade low-cost comfortable wearable brain-computer interface (BCI) system with eight channels is designed for collecting the driver's EEG signal. Second, wavelet de-noising and down-sample algorithms are utilized to enhance the quality of EEG data, and Fast Fourier Transformation (FFT) is adopted to extract the EEG power spectrum density (PSD). In this step, sparse representation classification combined with k-singular value decomposition (KSVD) is firstly introduced in PSD to estimate the driver's vigilance level. Finally, a novel safety strategy of vehicle speed control, which controls the electronic throttle opening and automatic braking after driver fatigue detection using the above method, is presented to avoid serious collisions and traffic accidents. The simulation and practical testing results demonstrate the feasibility of the vehicle active safety model.

A Vehicle Active Safety Model: Vehicle Speed Control Based on Driver Vigilance Detection Using Wearable EEG and Sparse Representation

PubMed Central

Zhang, Zutao; Luo, Dianyuan; Rasim, Yagubov; Li, Yanjun; Meng, Guanjun; Xu, Jian; Wang, Chunbai

2016-01-01

In this paper, we present a vehicle active safety model for vehicle speed control based on driver vigilance detection using low-cost, comfortable, wearable electroencephalographic (EEG) sensors and sparse representation. The proposed system consists of three main steps, namely wireless wearable EEG collection, driver vigilance detection, and vehicle speed control strategy. First of all, a homemade low-cost comfortable wearable brain-computer interface (BCI) system with eight channels is designed for collecting the driver’s EEG signal. Second, wavelet de-noising and down-sample algorithms are utilized to enhance the quality of EEG data, and Fast Fourier Transformation (FFT) is adopted to extract the EEG power spectrum density (PSD). In this step, sparse representation classification combined with k-singular value decomposition (KSVD) is firstly introduced in PSD to estimate the driver’s vigilance level . Finally, a novel safety strategy of vehicle speed control, which controls the electronic throttle opening and automatic braking after driver fatigue detection using the above method, is presented to avoid serious collisions and traffic accidents. The simulation and practical testing results demonstrate the feasibility of the vehicle active safety model. PMID:26907278

Stratification of eosinophilic asthma patients treated with reslizumab and GINA Step 4 or 5 therapy.

PubMed

Brusselle, Guy; Canvin, Janice; Weiss, Sivan; Sun, Shawn X; Buhl, Roland

2017-07-01

Reslizumab, an anti-interleukin-5 monoclonal antibody, significantly reduces exacerbation frequency and improves lung function, asthma control and quality of life in adults with severe eosinophilic asthma, as demonstrated in Phase III studies. This secondary analysis assessed reslizumab's efficacy in patients receiving baseline treatment per Global Initiative for Asthma (GINA) Step 4 and Step 5 guidelines. Pooled data from duplicate, Phase III, reslizumab versus placebo studies in patients with severe eosinophilic asthma (blood eosinophils ≥400 cells·µL -1 ) were stratified by baseline therapy. Efficacy assessments were exacerbation rates and changes from baseline forced expiratory volume in 1 s (FEV 1 ) and patient-reported outcomes. Of 953 patients, 69% (n=657) and 11% (n=106) were receiving Step 4 and Step 5 therapy, respectively. Compared with placebo, reslizumab reduced exacerbation rates by 53% (95% CI 0.36-0.62) and 72% (95% CI 0.15-0.52), in Step 4 and Step 5 groups respectively. By study end, reslizumab increased FEV 1 in Step 4 and Step 5 groups by 103 mL (95% CI 52-154 mL) and 237 mL (95% CI 68-407 mL), respectively. Reslizumab also improved patient-reported outcomes compared with placebo in both groups. Reslizumab reduces exacerbation rates and improves lung function and patient-reported outcomes in patients with eosinophilic asthma receiving therapy per Steps 4 and 5 of the GINA guidelines.

Stratification of eosinophilic asthma patients treated with reslizumab and GINA Step 4 or 5 therapy

PubMed Central

Weiss, Sivan; Sun, Shawn X.; Buhl, Roland

2017-01-01

Reslizumab, an anti-interleukin-5 monoclonal antibody, significantly reduces exacerbation frequency and improves lung function, asthma control and quality of life in adults with severe eosinophilic asthma, as demonstrated in Phase III studies. This secondary analysis assessed reslizumab's efficacy in patients receiving baseline treatment per Global Initiative for Asthma (GINA) Step 4 and Step 5 guidelines. Pooled data from duplicate, Phase III, reslizumab versus placebo studies in patients with severe eosinophilic asthma (blood eosinophils ≥400 cells·µL−1) were stratified by baseline therapy. Efficacy assessments were exacerbation rates and changes from baseline forced expiratory volume in 1 s (FEV1) and patient-reported outcomes. Of 953 patients, 69% (n=657) and 11% (n=106) were receiving Step 4 and Step 5 therapy, respectively. Compared with placebo, reslizumab reduced exacerbation rates by 53% (95% CI 0.36–0.62) and 72% (95% CI 0.15–0.52), in Step 4 and Step 5 groups respectively. By study end, reslizumab increased FEV1 in Step 4 and Step 5 groups by 103 mL (95% CI 52–154 mL) and 237 mL (95% CI 68–407 mL), respectively. Reslizumab also improved patient-reported outcomes compared with placebo in both groups. Reslizumab reduces exacerbation rates and improves lung function and patient-reported outcomes in patients with eosinophilic asthma receiving therapy per Steps 4 and 5 of the GINA guidelines. PMID:28845430

Recent developments in smart freezing technology applied to fresh foods.

PubMed

Xu, Ji-Cheng; Zhang, Min; Mujumdar, Arun S; Adhikari, Benu

2017-09-02

Due to the increased awareness of consumers in sensorial and nutritional quality of frozen foods, the freezing technology has to seek new and innovative technologies for better retaining the fresh like quality of foods. In this article, we review the recent developments in smart freezing technology applied to fresh foods. The application of these intelligent technologies and the associated underpinning concepts have greatly improved the quality of frozen foods and the freezing efficiency. These technologies are able to automatically collect the information in-line during freezing and help control the freezing process better. Smart freezing technology includes new and intelligent technologies and concepts applied to the pretreatment of the frozen product, freezing processes, cold chain logistics as well as warehouse management. These technologies enable real-time monitoring of quality during the freezing process and help improve product quality and freezing efficiency. We also provide a brief overview of several sensing technologies used to achieve automatic control of individual steps of freezing process. These sensing technologies include computer vision, electronic nose, electronic tongue, digital simulation, confocal laser, near infrared spectroscopy, nuclear magnetic resonance technology and ultrasound. Understanding of the mechanism of these new technologies will be helpful for applying them to improve the quality of frozen foods.

Characterization of ceramic powders by an X-ray measuring method

NASA Technical Reports Server (NTRS)

Ziegler, B.

1983-01-01

X-ray line broadening analysis gives quantitative data on structural changes of ceramic powders after different processing steps. Various Al2O3 powders were investigated and the following points are discussed on the basis of these results: X-ray line broadening analysis, structural changes during grinding, structural changes during annealing, influence of structural properties on sintering behavior and application of line broadening analysis to quality control of powders.

Optimization and quality control of genome-wide Hi-C library preparation.

PubMed

Zhang, Xiang-Yuan; He, Chao; Ye, Bing-Yu; Xie, De-Jian; Shi, Ming-Lei; Zhang, Yan; Shen, Wen-Long; Li, Ping; Zhao, Zhi-Hu

2017-09-20

Highest-throughput chromosome conformation capture (Hi-C) is one of the key assays for genome- wide chromatin interaction studies. It is a time-consuming process that involves many steps and many different kinds of reagents, consumables, and equipments. At present, the reproducibility is unsatisfactory. By optimizing the key steps of the Hi-C experiment, such as crosslinking, pretreatment of digestion, inactivation of restriction enzyme, and in situ ligation etc., we established a robust Hi-C procedure and prepared two biological replicates of Hi-C libraries from the GM12878 cells. After preliminary quality control by Sanger sequencing, the two replicates were high-throughput sequenced. The bioinformatics analysis of the raw sequencing data revealed the mapping-ability and pair-mate rate of the raw data were around 90% and 72%, respectively. Additionally, after removal of self-circular ligations and dangling-end products, more than 96% of the valid pairs were reached. Genome-wide interactome profiling shows clear topological associated domains (TADs), which is consistent with previous reports. Further correlation analysis showed that the two biological replicates strongly correlate with each other in terms of both bin coverage and all bin pairs. All these results indicated that the optimized Hi-C procedure is robust and stable, which will be very helpful for the wide applications of the Hi-C assay.

The use of indicators to improve the quality of intensive care: theoretical aspects and experiences from the Dutch intensive care registry.

PubMed

van der Voort, P H J; van der Veer, S N; de Vos, M L G

2012-10-01

In the concept of total quality management that was originally developed in industry, the use of quality indicators is essential. The implementation of quality indicators in the intensive care unit to improve the quality of care is a complex process. This process can be described in seven subsequent steps of an indicator-based quality improvement (IBQI) cycle. With this IBQI cycle, a continuous quality improvement can be achieved with the use of indicator data in a benchmark setting. After the development of evidence-based indicators, a sense of urgency has to be created, registration should start, raw data must be analysed, feedback must be given, and interpretation and conclusions must be made, followed by a quality improvement plan. The last step is the implementation of changes that needs a sense of urgency, and this completes the IBQI cycle. Barriers and facilitators are found in each step. They should be identified and addressed in a multifaceted quality improvement strategy. © 2012 The Authors. Acta Anaesthesiologica Scandinavica © 2012 The Acta Anaesthesiologica Scandinavica Foundation.

Increasing older adults’ walking through primary care: results of a pilot randomized controlled trial

PubMed Central

Mutrie, Nanette

2012-01-01

Background. Physical activity can positively influence health for older adults. Primary care is a good setting for physical activity promotion. Objective. To assess the feasibility of a pedometer-based walking programme in combination with physical activity consultations. Methods. Design: Two-arm (intervention/control) 12-week randomized controlled trial with a 12-week follow-up for the intervention group. Setting: One general practice in Glasgow, UK. Participants: Participants were aged ≥65 years. The intervention group received two 30-minute physical activity consultations from a trained practice nurse, a pedometer and a walking programme. The control group continued as normal for 12 weeks and then received the intervention. Both groups were followed up at 12 and 24 weeks. Outcome measures: Step counts were measured by sealed pedometers and an activPALTM monitor. Psychosocial variables were assessed and focus groups conducted. Results. The response rate was 66% (187/284), and 90% of those randomized (37/41) completed the study. Qualitative data suggested that the pedometer and nurse were helpful to the intervention. Step counts (activPAL) showed a significant increase from baseline to week 12 for the intervention group, while the control group showed no change. Between weeks 12 and 24, step counts were maintained in the intervention group, and increased for the control group after receiving the intervention. The intervention was associated with improved quality of life and reduced sedentary time. Conclusions. It is feasible to recruit and retain older adults from primary care and help them increase walking. A larger trial is necessary to confirm findings and consider cost-effectiveness. PMID:22843637

Optimum processing of mammographic film.

PubMed

Sprawls, P; Kitts, E L

1996-03-01

Underprocessing of mammographic film can result in reduced contrast and visibility of breast structures and an unnecessary increase in radiation dose to the patient. Underprocessing can be caused by physical factors (low developer temperature, inadequate development time, insufficient developer agitation) or chemical factors (developer not optimized for film type; overdiluted, underreplenished, contaminated, or frequently changed developer). Conventional quality control programs are designed to produce consistent processing but do not address the issue of optimum processing. Optimum processing is defined as the level of processing that produces the film performance characteristics (contrast and sensitivity) specified by the film manufacturer. Optimum processing of mammographic film can be achieved by following a two-step protocol. The first step is to set up the processing conditions according to recommendations from the film and developer chemistry manufacturers. The second step is to verify the processing results by comparing them with sensitometric data provided by the film manufacturer.

Production and Purification of Recombinant Filamentous Bacteriophages Displaying Immunogenic Heterologous Epitopes.

PubMed

Deng, Lei; Linero, Florencia; Saelens, Xavier

2016-01-01

Viruslike particles often combine high physical stability with robust immunogenicity. Furthermore, when such particles are based on bacteriophages, they can be produced in high amounts at minimal cost and typically will require only standard biologically contained facilities. We provide protocols for the characterization and purification of recombinant viruslike particles derived from filamentous bacteriophages. As an example, we focus on filamentous Escherichia coli fd phage displaying a conserved influenza A virus epitope that is fused genetically to the N-terminus of the major coat protein of this phage. A step-by-step procedure to obtain a high-titer, pure recombinant phage preparation is provided. We also describe a quality control experiment based on a biological readout of the purified fd phage preparation. These protocols together with the highlighted critical steps may facilitate generic implementation of the provided procedures for the display of other epitopes by recombinant fd phages.

Note: long range and accurate measurement of deep trench microstructures by a specialized scanning tunneling microscope.

PubMed

Ju, Bing-Feng; Chen, Yuan-Liu; Zhang, Wei; Zhu, Wule; Jin, Chao; Fang, F Z

2012-05-01

A compact but practical scanning tunneling microscope (STM) with high aspect ratio and high depth capability has been specially developed. Long range scanning mechanism with tilt-adjustment stage is adopted for the purpose of adjusting the probe-sample relative angle to compensate the non-parallel effects. A periodical trench microstructure with a pitch of 10 μm has been successfully imaged with a long scanning range up to 2.0 mm. More innovatively, a deep trench with depth and step height of 23.0 μm has also been successfully measured, and slope angle of the sidewall can approximately achieve 67°. The probe can continuously climb the high step and exploring the trench bottom without tip crashing. The new STM could perform long range measurement for the deep trench and high step surfaces without image distortion. It enables accurate measurement and quality control of periodical trench microstructures.

Process for conversion of lignin to reformulated hydrocarbon gasoline

DOEpatents

Shabtai, Joseph S.; Zmierczak, Wlodzimierz W.; Chornet, Esteban

1999-09-28

A process for converting lignin into high-quality reformulated hydrocarbon gasoline compositions in high yields is disclosed. The process is a two-stage, catalytic reaction process that produces a reformulated hydrocarbon gasoline product with a controlled amount of aromatics. In the first stage, a lignin material is subjected to a base-catalyzed depolymerization reaction in the presence of a supercritical alcohol as a reaction medium, to thereby produce a depolymerized lignin product. In the second stage, the depolymerized lignin product is subjected to a sequential two-step hydroprocessing reaction to produce a reformulated hydrocarbon gasoline product. In the first hydroprocessing step, the depolymerized lignin is contacted with a hydrodeoxygenation catalyst to produce a hydrodeoxygenated intermediate product. In the second hydroprocessing step, the hydrodeoxygenated intermediate product is contacted with a hydrocracking/ring hydrogenation catalyst to produce the reformulated hydrocarbon gasoline product which includes various desirable naphthenic and paraffinic compounds.

Los Angeles County Steps to Excellence Project: QRS Profile. The Child Care Quality Rating System (QRS) Assessment

ERIC Educational Resources Information Center

Child Trends, 2010

2010-01-01

This paper presents a profile of Los Angeles County's Steps to Excellence Project prepared as part of the Child Care Quality Rating System (QRS) Assessment Study. The profile consists of several sections and their corresponding descriptions including: (1) Program Information; (2) Rating Details; (3) Quality Indicators for Center-Based Programs;…

Lithographic chip identification: meeting the failure analysis challenge

NASA Astrophysics Data System (ADS)

Perkins, Lynn; Riddell, Kevin G.; Flack, Warren W.

1992-06-01

This paper describes a novel method using stepper photolithography to uniquely identify individual chips for permanent traceability. A commercially available 1X stepper is used to mark chips with an identifier or `serial number' which can be encoded with relevant information for the integrated circuit manufacturer. The permanent identification of individual chips can improve current methods of quality control, failure analysis, and inventory control. The need for this technology is escalating as manufacturers seek to provide six sigma quality control for their products and trace fabrication problems to their source. This need is especially acute for parts that fail after packaging and are returned to the manufacturer for analysis. Using this novel approach, failure analysis data can be tied back to a particular batch, wafer, or even a position within a wafer. Process control can be enhanced by identifying the root cause of chip failures. Chip identification also addresses manufacturers concerns with increasing incidences of chip theft. Since chips currently carry no identification other than the manufacturer's name and part number, recovery efforts are hampered by the inability to determine the sales history of a specific packaged chip. A definitive identifier or serial number for each chip would address this concern. The results of chip identification (patent pending) are easily viewed through a low power microscope. Batch number, wafer number, exposure step, and chip location within the exposure step can be recorded, as can dates and other items of interest. An explanation of the chip identification procedure and processing requirements are described. Experimental testing and results are presented, and potential applications are discussed.

Into Thin Air.

ERIC Educational Resources Information Center

Kennedy, Mike

2001-01-01

Shows how schools are working to avoid the types of equipment, supplies, and maintenance practices that harm indoor air quality. Simple steps to maintaining a cleaner indoor air environment are highlighted as are steps to reducing the problem air quality and the occurrence of asthma. (GR)

Quality Measures in Pre-Analytical Phase of Tissue Processing: Understanding Its Value in Histopathology.

PubMed

Rao, Shalinee; Masilamani, Suresh; Sundaram, Sandhya; Duvuru, Prathiba; Swaminathan, Rajendiran

2016-01-01

Quality monitoring in histopathology unit is categorized into three phases, pre-analytical, analytical and post-analytical, to cover various steps in the entire test cycle. Review of literature on quality evaluation studies pertaining to histopathology revealed that earlier reports were mainly focused on analytical aspects with limited studies on assessment of pre-analytical phase. Pre-analytical phase encompasses several processing steps and handling of specimen/sample by multiple individuals, thus allowing enough scope for errors. Due to its critical nature and limited studies in the past to assess quality in pre-analytical phase, it deserves more attention. This study was undertaken to analyse and assess the quality parameters in pre-analytical phase in a histopathology laboratory. This was a retrospective study done on pre-analytical parameters in histopathology laboratory of a tertiary care centre on 18,626 tissue specimens received in 34 months. Registers and records were checked for efficiency and errors for pre-analytical quality variables: specimen identification, specimen in appropriate fixatives, lost specimens, daily internal quality control performance on staining, performance in inter-laboratory quality assessment program {External quality assurance program (EQAS)} and evaluation of internal non-conformities (NC) for other errors. The study revealed incorrect specimen labelling in 0.04%, 0.01% and 0.01% in 2007, 2008 and 2009 respectively. About 0.04%, 0.07% and 0.18% specimens were not sent in fixatives in 2007, 2008 and 2009 respectively. There was no incidence of specimen lost. A total of 113 non-conformities were identified out of which 92.9% belonged to the pre-analytical phase. The predominant NC (any deviation from normal standard which may generate an error and result in compromising with quality standards) identified was wrong labelling of slides. Performance in EQAS for pre-analytical phase was satisfactory in 6 of 9 cycles. A low incidence of errors in pre-analytical phase implies that a satisfactory level of quality standards was being practiced with still scope for improvement.

Global harmonization of food safety regulations: perspectives from Japan after the Fukushima nuclear accident.

PubMed

Yoshida, Mitsuru

2014-08-01

Japanese food self-sufficiency was only 39% on the basis of kcal in 2012, so Japan relies heavily on imported food. Hence the necessity of having international rules on the regulation of food contaminants is important especially for countries like Japan that depend on food imports. A One-Stop-Testing system is desired, in which the test result obtained from a single testing laboratory is accepted as valid worldwide. To establish this system, laboratory accreditation under international standards is a necessary step. Furthermore, the importance of supply of reference materials for internal quality control and proficiency testing for external quality control of each laboratory's analytical system is reviewed in connection with the experience of radioactive nuclide contamination resulting from the Fukushima nuclear power plant accident in March 2011. © 2013 Society of Chemical Industry.

Standardizing flow cytometric assays in long-term population-based studies

NASA Astrophysics Data System (ADS)

Melzer, Susanne; Bocsi, Jozsef; Tárnok, Attila

2015-03-01

Quantification of leukocyte subpopulations and characterization of antigen-expression pattern on the cellular surface can play an important role in diagnostics. The state of cellular immunology on the single-cell level was analyzed by polychromatic flow cytometry in a recent comparative study within the average Leipzig population (LIFE - Leipzig Research Centre for Civilization Diseases). Data of 1699 subjects were recorded over a long-time period of three years (in a total of 1126 days). To ensure compatibility of such huge data sets, quality-controls on many levels (stability of instrumentation, low intra-laboratory variance and reader independent data analysis) are essential. The LIFE study aims to analyze various cytometric pattern to reveal the relationship between the life-style, the environmental effects and the individual health. We therefore present here a multi-step quality control procedure for long-term comparative studies.

Top-down solid-phase fabrication of nanoporous cadmium oxide architectures.

PubMed

Yu, Haidong; Wang, Deshen; Han, Ming-Yong

2007-02-28

In this article, we have demonstrated one-step solid-phase transformation from high-quality cadmium carbonate microcrystals into highly nanoporous cadmium oxide. The high crystal quality of cadmium carbonate is critical for the successful fabrication of porous nanoarchitectures with predetermined morphology and well-controlled internal structure. This novel strategy has a good potential to prepare nanoporous materials at a large scale by using perfect monolithic carbonate crystals, and it is also useful to synthesize different nanoporous materials on metal-oxide-coated substrates. Meanwhile, this simple thermal transformation of cadmium carbonate into porous structures has further been extended to convert calcium carbonate into such porous structures.

Payment reform to finance a medical home: comment on "Achieving cost control, care coordination, and quality improvement through incremental payment system reform".

PubMed

McGuire, Thomas G

2010-01-01

This commentary on R. F. Averill et al. (2010) addresses their idea of risk and quality adjusting fee-for-service payments to primary care physicians in order to improve the efficiency of primary care and take a step toward financing a "medical home"for patients. I show how their idea can create incentives for efficient practice styles. Pairing this with an active beneficiary choice of primary care physician with an enrollment fee would make the idea easier to implement and provide an incentive and the financing for elements of service not covered by procedure-based fees.

A method for tailoring the information content of a software process model

NASA Technical Reports Server (NTRS)

Perkins, Sharon; Arend, Mark B.

1990-01-01

The framework is defined for a general method for selecting a necessary and sufficient subset of a general software life cycle's information products, to support new software development process. Procedures for characterizing problem domains in general and mapping to a tailored set of life cycle processes and products is presented. An overview of the method is shown using the following steps: (1) During the problem concept definition phase, perform standardized interviews and dialogs between developer and user, and between user and customer; (2) Generate a quality needs profile of the software to be developed, based on information gathered in step 1; (3) Translate the quality needs profile into a profile of quality criteria that must be met by the software to satisfy the quality needs; (4) Map the quality criteria to set of accepted processes and products for achieving each criterion; (5) Select the information products which match or support the accepted processes and product of step 4; and (6) Select the design methodology which produces the information products selected in step 5.

A method for tailoring the information content of a software process model

NASA Technical Reports Server (NTRS)

Perkins, Sharon; Arend, Mark B.

1990-01-01

The framework is defined for a general method for selecting a necessary and sufficient subset of a general software life cycle's information products, to support new software development process. Procedures for characterizing problem domains in general and mapping to a tailored set of life cycle processes and products is presented. An overview of the method is shown using the following steps: (1) During the problem concept definition phase, perform standardized interviews and dialogs between developer and user, and between user and customer; (2) Generate a quality needs profile of the software to be developed, based on information gathered in step 1; (3) Translate the quality needs profile into a profile of quality criteria that must be met by the software to satisfy the quality needs; (4) Map the quality criteria to a set of accepted processes and products for achieving each criterion; (5) select the information products which match or support the accepted processes and product of step 4; and (6) Select the design methodology which produces the information products selected in step 5.

Errors in clinical laboratories or errors in laboratory medicine?

PubMed

Plebani, Mario

2006-01-01

Laboratory testing is a highly complex process and, although laboratory services are relatively safe, they are not as safe as they could or should be. Clinical laboratories have long focused their attention on quality control methods and quality assessment programs dealing with analytical aspects of testing. However, a growing body of evidence accumulated in recent decades demonstrates that quality in clinical laboratories cannot be assured by merely focusing on purely analytical aspects. The more recent surveys on errors in laboratory medicine conclude that in the delivery of laboratory testing, mistakes occur more frequently before (pre-analytical) and after (post-analytical) the test has been performed. Most errors are due to pre-analytical factors (46-68.2% of total errors), while a high error rate (18.5-47% of total errors) has also been found in the post-analytical phase. Errors due to analytical problems have been significantly reduced over time, but there is evidence that, particularly for immunoassays, interference may have a serious impact on patients. A description of the most frequent and risky pre-, intra- and post-analytical errors and advice on practical steps for measuring and reducing the risk of errors is therefore given in the present paper. Many mistakes in the Total Testing Process are called "laboratory errors", although these may be due to poor communication, action taken by others involved in the testing process (e.g., physicians, nurses and phlebotomists), or poorly designed processes, all of which are beyond the laboratory's control. Likewise, there is evidence that laboratory information is only partially utilized. A recent document from the International Organization for Standardization (ISO) recommends a new, broader definition of the term "laboratory error" and a classification of errors according to different criteria. In a modern approach to total quality, centered on patients' needs and satisfaction, the risk of errors and mistakes in pre- and post-examination steps must be minimized to guarantee the total quality of laboratory services.

Normalization of gene expression measurement of tissue samples obtained by transurethral resection of bladder tumors.

PubMed

Pop, Laura A; Pileczki, Valentina; Cojocneanu-Petric, Roxana M; Petrut, Bogdan; Braicu, Cornelia; Jurj, Ancuta M; Buiga, Rares; Achimas-Cadariu, Patriciu; Berindan-Neagoe, Ioana

2016-01-01

Sample processing is a crucial step for all types of genomic studies. A major challenge for researchers is to understand and predict how RNA quality affects the identification of transcriptional differences (by introducing either false-positive or false-negative errors). Nanotechnologies help improve the quality and quantity control for gene expression studies. The study was performed on 14 tumor and matched normal pairs of tissue from patients with bladder urothelial carcinomas. We assessed the RNA quantity by using the NanoDrop spectrophotometer and the quality by nano-microfluidic capillary electrophoresis technology provided by Agilent 2100 Bioanalyzer. We evaluated the amplification status of three housekeeping genes and one small nuclear RNA gene using the ViiA 7 platform, with specific primers. Every step of the sample handling protocol, which begins with sample harvest and ends with the data analysis, is of utmost importance due to the fact that it is time consuming, labor intensive, and highly expensive. High temperature of the surgical procedure does not affect the small nucleic acid sequences in comparison with the mRNA. Gene expression is clearly affected by the RNA quality, but less affected in the case of small nuclear RNAs. We proved that the high-temperature, highly invasive transurethral resection of bladder tumor procedure damages the tissue and affects the integrity of the RNA from biological specimens.

Normalization of gene expression measurement of tissue samples obtained by transurethral resection of bladder tumors

PubMed Central

Pop, Laura A; Pileczki, Valentina; Cojocneanu-Petric, Roxana M; Petrut, Bogdan; Braicu, Cornelia; Jurj, Ancuta M; Buiga, Rares; Achimas-Cadariu, Patriciu; Berindan-Neagoe, Ioana

2016-01-01

Background Sample processing is a crucial step for all types of genomic studies. A major challenge for researchers is to understand and predict how RNA quality affects the identification of transcriptional differences (by introducing either false-positive or false-negative errors). Nanotechnologies help improve the quality and quantity control for gene expression studies. Patients and methods The study was performed on 14 tumor and matched normal pairs of tissue from patients with bladder urothelial carcinomas. We assessed the RNA quantity by using the NanoDrop spectrophotometer and the quality by nano-microfluidic capillary electrophoresis technology provided by Agilent 2100 Bioanalyzer. We evaluated the amplification status of three housekeeping genes and one small nuclear RNA gene using the ViiA 7 platform, with specific primers. Results Every step of the sample handling protocol, which begins with sample harvest and ends with the data analysis, is of utmost importance due to the fact that it is time consuming, labor intensive, and highly expensive. High temperature of the surgical procedure does not affect the small nucleic acid sequences in comparison with the mRNA. Conclusion Gene expression is clearly affected by the RNA quality, but less affected in the case of small nuclear RNAs. We proved that the high-temperature, highly invasive transurethral resection of bladder tumor procedure damages the tissue and affects the integrity of the RNA from biological specimens. PMID:27330317

Mobile Genome Express (MGE): A comprehensive automatic genetic analyses pipeline with a mobile device.

PubMed

Yoon, Jun-Hee; Kim, Thomas W; Mendez, Pedro; Jablons, David M; Kim, Il-Jin

2017-01-01

The development of next-generation sequencing (NGS) technology allows to sequence whole exomes or genome. However, data analysis is still the biggest bottleneck for its wide implementation. Most laboratories still depend on manual procedures for data handling and analyses, which translates into a delay and decreased efficiency in the delivery of NGS results to doctors and patients. Thus, there is high demand for developing an automatic and an easy-to-use NGS data analyses system. We developed comprehensive, automatic genetic analyses controller named Mobile Genome Express (MGE) that works in smartphones or other mobile devices. MGE can handle all the steps for genetic analyses, such as: sample information submission, sequencing run quality check from the sequencer, secured data transfer and results review. We sequenced an Actrometrix control DNA containing multiple proven human mutations using a targeted sequencing panel, and the whole analysis was managed by MGE, and its data reviewing program called ELECTRO. All steps were processed automatically except for the final sequencing review procedure with ELECTRO to confirm mutations. The data analysis process was completed within several hours. We confirmed the mutations that we have identified were consistent with our previous results obtained by using multi-step, manual pipelines.

Stepped care in the treatment of trichotillomania.

PubMed

Rogers, Kate; Banis, Maria; Falkenstein, Martha J; Malloy, Elizabeth J; McDonough, Lauren; Nelson, Samuel O; Rusch, Natalie; Haaga, David A F

2014-04-01

There are effective treatments of trichotillomania (TTM), but access to expert providers is limited. This study tested a stepped care model aimed at improving access. Participants were 60 (95% women, 75% Caucasian, 2% Hispanic) adults (M = 33.18 years) with TTM. They were randomly assigned to immediate versus waitlist (WL) conditions for Step 1 (10 weeks of web-based self-help via StopPulling.com). After Step 1, participants chose whether to engage in Step 2 (8 sessions of in-person habit reversal training [HRT]). In Step 1, the immediate condition had a small (d = .21) but significant advantage, relative to WL, in reducing TTM symptom ratings by interviewers (masked to experimental condition but not to assessment point); there were no differences in self-reported TTM symptoms, alopecia, functional impairment, or quality of life. Step 1 was more effective for those who used the site more often. Stepped care was highly acceptable: Motivation did not decrease during Step 1; treatment satisfaction was high, and 76% enrolled in Step 2. More symptomatic patients self-selected into HRT, and on average they improved significantly. Over one third (36%) made clinically significant improvement in self-reported TTM symptoms. Considering the entire stepped care program, participants significantly reduced symptoms, alopecia, and impairment, and increased quality of life. For quality of life and symptom severity, there was some relapse by 3-month follow-up. Stepped care is acceptable, and HRT was associated with improvement. Further work is needed to determine which patients with TTM can benefit from self-help and how to reduce relapse.

Maize - GO annotation methods, evaluation, and review (Maize-GAMER)

USDA-ARS?s Scientific Manuscript database

Making a genome sequence accessible and useful involves three basic steps: genome assembly, structural annotation, and functional annotation. The quality of data generated at each step influences the accuracy of inferences that can be made, with high-quality analyses produce better datasets resultin...

Quantitative structure-activity relationship models that stand the test of time.

PubMed

Davis, Andrew M; Wood, David J

2013-04-01

The pharmaceutical industry is in a period of intense change. While this has many drivers, attrition through the development process continues to be an important pressure. The emerging definitions of "compound quality" that are based on retrospective analyses of developmental attrition have highlighted a new direction for medicinal chemistry and the paradigm of "quality at the point of design". The time has come for retrospective analyses to catalyze prospective action. Quality at the point of design places pressure on the quality of our predictive models. Empirical QSAR models when built with care provide true predictive control, but their accuracy and precision can be improved. Here we describe AstraZeneca's experience of automation in QSAR model building and validation, and how an informatics system can provide a step-change in predictive power to project design teams, if they choose to use it.

ATACseqQC: a Bioconductor package for post-alignment quality assessment of ATAC-seq data.

PubMed

Ou, Jianhong; Liu, Haibo; Yu, Jun; Kelliher, Michelle A; Castilla, Lucio H; Lawson, Nathan D; Zhu, Lihua Julie

2018-03-01

ATAC-seq (Assays for Transposase-Accessible Chromatin using sequencing) is a recently developed technique for genome-wide analysis of chromatin accessibility. Compared to earlier methods for assaying chromatin accessibility, ATAC-seq is faster and easier to perform, does not require cross-linking, has higher signal to noise ratio, and can be performed on small cell numbers. However, to ensure a successful ATAC-seq experiment, step-by-step quality assurance processes, including both wet lab quality control and in silico quality assessment, are essential. While several tools have been developed or adopted for assessing read quality, identifying nucleosome occupancy and accessible regions from ATAC-seq data, none of the tools provide a comprehensive set of functionalities for preprocessing and quality assessment of aligned ATAC-seq datasets. We have developed a Bioconductor package, ATACseqQC, for easily generating various diagnostic plots to help researchers quickly assess the quality of their ATAC-seq data. In addition, this package contains functions to preprocess aligned ATAC-seq data for subsequent peak calling. Here we demonstrate the utilities of our package using 25 publicly available ATAC-seq datasets from four studies. We also provide guidelines on what the diagnostic plots should look like for an ideal ATAC-seq dataset. This software package has been used successfully for preprocessing and assessing several in-house and public ATAC-seq datasets. Diagnostic plots generated by this package will facilitate the quality assessment of ATAC-seq data, and help researchers to evaluate their own ATAC-seq experiments as well as select high-quality ATAC-seq datasets from public repositories such as GEO to avoid generating hypotheses or drawing conclusions from low-quality ATAC-seq experiments. The software, source code, and documentation are freely available as a Bioconductor package at https://bioconductor.org/packages/release/bioc/html/ATACseqQC.html .

Simulating Population Dynamics in an Ecosystem Context Using Coupled Eulerian-Lagrangian Hybrid Models (CEL HYBRID Models)

DTIC Science & Technology

2000-04-01

natural systems (King 1993). Population modelers have used certain difference equations, sometimes called the Lotka - Volterra system of equations...environment 28 Step 5 - Simulate the hydraulic and/or water quality field 29 Step 6 - Generate biota response data for decision support 29 Step 7...Quality and Contaminant Modeling Branch (WQCMB), and Mr. R. Andrew Goodwin, contract student, WQCMB, under the general supervision of Dr. Mark S. Dortch

Random Forest Application for NEXRAD Radar Data Quality Control

NASA Astrophysics Data System (ADS)

Keem, M.; Seo, B. C.; Krajewski, W. F.

2017-12-01

Identification and elimination of non-meteorological radar echoes (e.g., returns from ground, wind turbines, and biological targets) are the basic data quality control steps before radar data use in quantitative applications (e.g., precipitation estimation). Although WSR-88Ds' recent upgrade to dual-polarization has enhanced this quality control and echo classification, there are still challenges to detect some non-meteorological echoes that show precipitation-like characteristics (e.g., wind turbine or anomalous propagation clutter embedded in rain). With this in mind, a new quality control method using Random Forest is proposed in this study. This classification algorithm is known to produce reliable results with less uncertainty. The method introduces randomness into sampling and feature selections and integrates consequent multiple decision trees. The multidimensional structure of the trees can characterize the statistical interactions of involved multiple features in complex situations. The authors explore the performance of Random Forest method for NEXRAD radar data quality control. Training datasets are selected using several clear cases of precipitation and non-precipitation (but with some non-meteorological echoes). The model is structured using available candidate features (from the NEXRAD data) such as horizontal reflectivity, differential reflectivity, differential phase shift, copolar correlation coefficient, and their horizontal textures (e.g., local standard deviation). The influence of each feature on classification results are quantified by variable importance measures that are automatically estimated by the Random Forest algorithm. Therefore, the number and types of features in the final forest can be examined based on the classification accuracy. The authors demonstrate the capability of the proposed approach using several cases ranging from distinct to complex rain/no-rain events and compare the performance with the existing algorithms (e.g., MRMS). They also discuss operational feasibility based on the observed strength and weakness of the method.

Use of NEXRAD radar-based observations for quality control of in-situ rain gauge measurements

NASA Astrophysics Data System (ADS)

Nelson, B. R.; Prat, O.; Leeper, R.

2017-12-01

Rain gauge quality control is an often over looked important step in the archive of historical precipitation estimates. We investigate the possibilities that exist for using ground based radar networks for quality control of rain gauge measurements. This process includes the point to pixel comparisons of the rain gauge measurements with NEXRAD observations. There are two NEXRAD based data sets used for reference; the NCEP stage IV and the NWS MRMS gridded data sets. The NCEP stage IV data set is available at 4km hourly for the period 2002-present and includes the radar-gauge bias adjusted precipitation estimate. The NWS MRMS data set includes several different variables such as reflectivity, radar-only estimates, precipitation flag, and radar-gauge bias adjusted precipitation estimates. The latter product provides for much more information to apply quality control such as identification of precipitation type, identification of storm type and Z-R relation. In addition, some of the variables are available at 5-minute scale. The rain gauge networks that are investigated are the Climate Reference Network (CRN), the Fischer-Porter Hourly Precipitation Database (HPD), and the Hydrometeorological Automated Data System (HADS). The CRN network is available at the 5-minute scale, the HPD network is available at the 15-minute and hourly scale, and HADS is available at the hourly scale. The varying scales present challenges for comparisons. However given the higher resolution radar-based products we identify an optimal combination of rain gauge observations that can be compared to the radar-based information. The quality control process focuses on identifying faulty gauges in direct comparison while a deeper investigation focuses on event-based differences from light rain to extreme storms.

Public reporting in health care: how do consumers use quality-of-care information? A systematic review.

PubMed

Faber, Marjan; Bosch, Marije; Wollersheim, Hub; Leatherman, Sheila; Grol, Richard

2009-01-01

One of the underlying goals of public reporting is to encourage the consumer to select health care providers or health plans that offer comparatively better quality-of-care. To review the weight consumers give to quality-of-care information in the process of choice, to summarize the effect of presentation formats, and to examine the impact of quality information on consumers' choice behavior. The evidence is organized in a theoretical consumer choice model. English language literature was searched in PubMed, the Cochrane Clinical Trial, and the EPOC Databases (January 1990-January 2008). Study selection was limited to randomized controlled trails, controlled before-after trials or interrupted time series. Included interventions focused on choice behavior of consumers in health care settings. Outcome measures referred to one of the steps in a consumer choice model. The quality of the study design was rated, and studies with low quality ratings were excluded. All 14 included studies examine quality information, usually CAHPS, with respect to its impact on the consumer's choice of health plans. Easy-to-read presentation formats and explanatory messages improve knowledge about and attitude towards the use of quality information; however, the weight given to quality information depends on other features, including free provider choice and costs. In real-world settings, having seen quality information is a strong determinant for choosing higher quality-rated health plans. This review contributes to an understanding of consumer choice behavior in health care settings. The small number of included studies limits the strength of our conclusions.

Experimental teleportation of a quantum controlled-NOT gate.

PubMed

Huang, Yun-Feng; Ren, Xi-Feng; Zhang, Yong-Sheng; Duan, Lu-Ming; Guo, Guang-Can

2004-12-10

Teleportation of quantum gates is a critical step for the implementation of quantum networking and teleportation-based models of quantum computation. We report an experimental demonstration of teleportation of the prototypical quantum controlled-NOT (CNOT) gate. Assisted with linear optical manipulations, photon entanglement produced from parametric down-conversion, and postselection from the coincidence measurements, we teleport the quantum CNOT gate from acting on local qubits to acting on remote qubits. The quality of the quantum gate teleportation is characterized through the method of quantum process tomography, with an average fidelity of 0.84 demonstrated for the teleported gate.

The test of VLSI circuits

NASA Astrophysics Data System (ADS)

Baviere, Ph.

Tests which have proven effective for evaluating VLSI circuits for space applications are described. It is recommended that circuits be examined after each manfacturing step to gain fast feedback on inadequacies in the production system. Data from failure modes which occur during operational lifetimes of circuits also permit redefinition of the manufacturing and quality control process to eliminate the defects identified. Other tests include determination of the operational envelope of the circuits, examination of the circuit response to controlled inputs, and the performance and functional speeds of ROM and RAM memories. Finally, it is desirable that all new circuits be designed with testing in mind.

Statistical Quality Control of Moisture Data in GEOS DAS

NASA Technical Reports Server (NTRS)

Dee, D. P.; Rukhovets, L.; Todling, R.

1999-01-01

A new statistical quality control algorithm was recently implemented in the Goddard Earth Observing System Data Assimilation System (GEOS DAS). The final step in the algorithm consists of an adaptive buddy check that either accepts or rejects outlier observations based on a local statistical analysis of nearby data. A basic assumption in any such test is that the observed field is spatially coherent, in the sense that nearby data can be expected to confirm each other. However, the buddy check resulted in excessive rejection of moisture data, especially during the Northern Hemisphere summer. The analysis moisture variable in GEOS DAS is water vapor mixing ratio. Observational evidence shows that the distribution of mixing ratio errors is far from normal. Furthermore, spatial correlations among mixing ratio errors are highly anisotropic and difficult to identify. Both factors contribute to the poor performance of the statistical quality control algorithm. To alleviate the problem, we applied the buddy check to relative humidity data instead. This variable explicitly depends on temperature and therefore exhibits a much greater spatial coherence. As a result, reject rates of moisture data are much more reasonable and homogeneous in time and space.

A system identification approach for developing model predictive controllers of antibody quality attributes in cell culture processes

PubMed Central

Schmitt, John; Beller, Justin; Russell, Brian; Quach, Anthony; Hermann, Elizabeth; Lyon, David; Breit, Jeffrey

2017-01-01

As the biopharmaceutical industry evolves to include more diverse protein formats and processes, more robust control of Critical Quality Attributes (CQAs) is needed to maintain processing flexibility without compromising quality. Active control of CQAs has been demonstrated using model predictive control techniques, which allow development of processes which are robust against disturbances associated with raw material variability and other potentially flexible operating conditions. Wide adoption of model predictive control in biopharmaceutical cell culture processes has been hampered, however, in part due to the large amount of data and expertise required to make a predictive model of controlled CQAs, a requirement for model predictive control. Here we developed a highly automated, perfusion apparatus to systematically and efficiently generate predictive models using application of system identification approaches. We successfully created a predictive model of %galactosylation using data obtained by manipulating galactose concentration in the perfusion apparatus in serialized step change experiments. We then demonstrated the use of the model in a model predictive controller in a simulated control scenario to successfully achieve a %galactosylation set point in a simulated fed‐batch culture. The automated model identification approach demonstrated here can potentially be generalized to many CQAs, and could be a more efficient, faster, and highly automated alternative to batch experiments for developing predictive models in cell culture processes, and allow the wider adoption of model predictive control in biopharmaceutical processes. © 2017 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers Biotechnol. Prog., 33:1647–1661, 2017 PMID:28786215

An eye movement pre-training fosters the comprehension of processes and functions in technical systems

PubMed Central

Skuballa, Irene T.; Fortunski, Caroline; Renkl, Alexander

2015-01-01

The main research goal of the present study was to investigate in how far pre-training eye movements can facilitate knowledge acquisition in multimedia (pre-training principle). We combined considerations from research on eye movement modeling and pre-training to design and test a non-verbal eye movement-based pre-training. Participants in the experimental condition watched an animated circle moving in close spatial resemblance to a static visualization of a solar plant accompanied by a narration in a subsequently presented learning environment. This training was expected to foster top-down processes as reflected in gaze behavior during the learning process and enhance knowledge acquisition. We compared two groups (N = 45): participants in the experimental condition received pre-training in a first step and processed the learning material in a second step, whereas the control group underwent the second step without any pre-training. The pre-training group outperformed the control group in their learning outcomes, particularly in knowledge about processes and functions of the solar plant. However, the superior learning outcomes in the pre-training group could not be explained by eye-movement patterns. Furthermore, the pre-training moderated the relationship between experienced stress and learning outcomes. In the control group, high stress levels hindered learning, which was not found for the pre-training group. On a delayed posttest participants were requested to draw a picture of the learning content. Despite a non-significant effect of training on the quality of drawings, the pre-training showed associations between learning outcomes at the first testing time and process-related aspects in the quality of their drawings. Overall, non-verbal pre-training is a successful instructional intervention to promote learning processes in novices although these processes did not directly reflect in learners' eye movement behavior during learning. PMID:26029138

A comparative study of one-step and two-step approaches for MAPbI3 perovskite layer and its influence on the performance of mesoscopic perovskite solar cell

NASA Astrophysics Data System (ADS)

Wang, Minhuan; Feng, Yulin; Bian, Jiming; Liu, Hongzhu; Shi, Yantao

2018-01-01

The mesoscopic perovskite solar cells (M-PSCs) were synthesized with MAPbI3 perovskite layers as light harvesters, which were grown with one-step and two-step solution process, respectively. A comparative study was performed through the quantitative correlation of resulting device performance and the crystalline quality of perovskite layers. Comparing with the one-step counterpart, a pronounced improvement in the steady-state power conversion efficiencies (PCEs) by 56.86% was achieved with two-step process, which was mainly resulted from the significant enhancement in fill factor (FF) from 48% to 77% without sacrificing the open circuit voltage (Voc) and short circuit current (Jsc). The enhanced FF was attributed to the reduced non-radiative recombination channels due to the better crystalline quality and larger grain size with the two-step processed perovskite layer. Moreover, the superiority of two-step over one-step process was demonstrated with rather good reproducibility.

Effect of production management on semen quality during long-term storage in different European boar studs.

PubMed

Schulze, M; Kuster, C; Schäfer, J; Jung, M; Grossfeld, R

2018-03-01

The processing of ejaculates is a fundamental step for the fertilizing capacity of boar spermatozoa. The aim of the present study was to identify factors that affect quality of boar semen doses. The production process during 1 day of semen processing in 26 European boar studs was monitored. In each boar stud, nine to 19 randomly selected ejaculates from 372 Pietrain boars were analyzed for sperm motility, acrosome and plasma membrane integrity, mitochondrial activity and thermo-resistance (TRT). Each ejaculate was monitored for production time and temperature for each step in semen processing using the special programmed software SEQU (version 1.7, Minitüb, Tiefenbach, Germany). The dilution of ejaculates with a short-term extender was completed in one step in 10 AI centers (n = 135 ejaculates), in two steps in 11 AI centers (n = 158 ejaculates) and in three steps in five AI centers (n = 79 ejaculates). Results indicated there was a greater semen quality with one-step isothermal dilution compared with the multi-step dilution of AI semen doses (total motility TRT d7: 71.1 ± 19.2%, 64.6 ± 20.0%, 47.1 ± 27.1%; one-step compared with two-step compared with the three-step dilution; P < .05). There was a marked advantage when using the one-step isothermal dilution regarding time management, preservation suitability, stability and stress resistance. One-step dilution caused significant lower holding times of raw ejaculates and reduced the possible risk of making mistakes due to a lower number of processing steps. These results lead to refined recommendations for boar semen processing. Copyright © 2018 Elsevier B.V. All rights reserved.

What proportion of people with hip and knee osteoarthritis meet physical activity guidelines? A systematic review and meta-analysis.

PubMed

Wallis, J A; Webster, K E; Levinger, P; Taylor, N F

2013-11-01

To determine the proportion of people with hip and knee osteoarthritis that meet physical activity guidelines recommended for adults and older adults. Systematic review with meta-analysis of studies measuring physical activity of participants with hip and knee osteoarthritis using an activity monitor. Physical activity levels were calculated using the mean average [95% confidence interval (CI)] weighted according to sample size. Meta-analyses determined the proportion of people meeting physical activity guidelines and recommendations of (1) ≥150 min per week of moderate to vigorous physical activity (MVPA) in bouts of ≥10 min; (2) ≥150 min per week of MVPA in absence of bouts; (3) ≥10,000 steps per day and ≥7000 steps per day. The Grades of Research, Assessment, Development and Evaluation (GRADE) approach was used to determine the quality of the evidence. For knee osteoarthritis, 21 studies involving 3266 participants averaged 50 min per week (95% CI = 46, 55) of MVPA when measured in bouts of ≥10 min, 131 min per week (95% CI = 125, 137) of MVPA, and 7753 daily steps (95% CI = 7582, 7924). Proportion meta-analyses provided high quality evidence that 13% (95% CI = 7, 20) completed ≥150 min per week of MVPA in bouts of ≥10 min, low quality evidence that 41% (95% CI = 23, 61) completed ≥150 min per week of MVPA in absence of bouts, moderate quality evidence that 19% (95% CI = 8, 33) completed ≥10,000 steps per day, and low quality evidence that 48% (95% CI = 31, 65) completed ≥7000 steps per day. For hip osteoarthritis, 11 studies involving 325 participants averaged 160 min per week (95% CI = 114, 216) of MVPA when measured in bouts of ≥10 min, 189 min per week (95% CI = 166, 212) of MVPA, and 8174 daily steps (95% CI = 7670, 8678). Proportion meta-analyses provided low quality evidence that 58% (95% CI = 18, 92) completed ≥150 min per week of MVPA in absence of bouts, low quality evidence that 30% (95% CI = 13, 50) completed ≥10,000 steps per day, and low quality evidence that 60% (95% CI = 47, 73) completed ≥7000 steps per day. A small to moderate proportion of people with knee and hip osteoarthritis met physical activity guidelines and recommended daily steps. Future research should establish the effects of increasing physical activity in this population to meet the current physical activity guidelines. Copyright © 2013 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Al Control in High Titanium Ferro with Low Oxygen Prepared by Thermite Reaction

NASA Astrophysics Data System (ADS)

Dou, Zhi-he; Wang, Cong; Fan, Shi-gang; Shi, Guan-yong; Zhang, Ting-an

Based on the pre-works, this paper proposed a new short stage process of the intensify aluminothermy reduction by the stage to prepare high titanium ferroalloy with low O and Al contents. We investigated the effects of Al and Ca and Si combination reduction agent, slag type and step-up reduction conditions on the Al content and distribution in the alloy. The results show that the step-up reduction can not only reduce effectively the oxygen content in the alloy, but also reduce effectively Al content. For instance, the oxygen content in high titanium ferroalloy is within 1%˜4%, and the Al content is within 1%˜5%. Its quality reaches the requirement of high titanium ferroalloy prepared by remelting process.

Effects of foot and ankle devices on balance, gait and falls in adults with sensory perception loss: a systematic review.

PubMed

Paton, Joanne; Hatton, Anna L; Rome, Keith; Kent, Bridie

2016-12-01

Foot and ankle devices are being developed as a method of preventing people with sensory perception loss sustaining a fall. Such devices are believed to work by reducing the likelihood of a fall by improving the balance and gait of the user. The objective of the review was to evaluate the effectiveness of foot and ankle devices for the prevention of falls and the improvement of balance and gait in adults with sensory perception loss. Participants were community-dwelling adults with bilateral pathological sensory perception loss. The current review evaluated any foot or ankle device, including but not restricted to, all types of footwear (therapeutic and retail), insoles (customized and prefabricated) and ankle-foot orthoses (AFOs). In the absence of randomized controlled trials (RCT), the review considered experimental and epidemiological study designs, except case series, individual case reports and descriptive cross-sectional studies. The primary outcome was number of falls. Secondary outcome measures were clinical or laboratory measures of balance or gait. A search for published and unpublished literature from inception to March 2015 written in the English language was conducted across a number of major electronic databases. A three-step search strategy was developed using MeSH terminology and keywords to ensure all that relevant materials are captured. Methodological quality of included studies was assessed by two reviewers, who appraised each study independently, using standardized Joanna Briggs Institute (JBI) critical appraisal tools. Quantitative data were extracted from the studies that were identified as meeting the criteria for methodological quality using the standardized JBI data extraction tools. Due to the heterogeneity of populations, interventions and outcome measures, meta-analyses were not possible and results are presented in narrative form. Nine trials (from 10 papers) involving 238 participants, (14 with multiple sclerosis and 16 with idiopathic peripheral neuropathy, 150 with diabetic neuropathy) and 58 controls were included in the review. No study reported falls as an outcome measure. The results of the included studies found that in people with sensory perception loss, postural sway improved with vibrating insoles and AFO, altering the softness and texture of the top cover had no effect on postural sway, wearing footwear over long distances or AFOs improved step-to-step consistency, and no foot and ankle device was reported to have a negative effect on the balance or gait of people with sensory perception loss. The methodological quality of the included studies was poor. No study used a randomized controlled trial (RCT) methodology. No study incorporated a follow-up period or tested the intervention within the context of the intended clinical environment. There is limited evidence to suggest that footwear and insole devices can artificially alter postural stability and may reduce the step-to-step variability in adults with sensory perception loss. Varying the material properties of an insole does not notably affect static balance or gait.

Helping doctors in training to STEP-UP: A leadership and quality improvement programme in the Belfast Health and Social Care Trust.

PubMed

Donaghy, Grainne; McKeever, Kris; Flanagan, Catherine; O'Kane, Donal; McQuillan, Bernie; Cash, Johnny; Jack, Cathy; Lundy, Claire

2018-05-01

Medical engagement in healthcare organisations can improve service development and patient experience. Doctors in training have limited opportunities to engage in service improvement work and develop leadership skills. We describe the Specialist Trainees Engaged in Leadership Programme (STEP) , a programme developed to introduce concepts of medical leadership and quality improvement skills in the Belfast Trust. STEP started in 2013 and over 140 trainees have now participated in the programme. Over 42 quality improvement projects have been completed with the support of the programme. Evaluation of STEP has demonstrated an improvement across all domains explored throughout the duration of the programme, with benefits for the individual trainee and the wider organisation. We describe the programme in detail. The STEP curriculum can easily be adapted to meet the needs of NHS trainees, allowing them to understand the objectives and strategy of their employers and improve their ability to plan and deliver safe, effective, patient-centred care.

Pin-Hole Free Perovskite Film for Solar Cells Application Prepared by Controlled Two-Step Spin-Coating Method

NASA Astrophysics Data System (ADS)

Bahtiar, A.; Rahmanita, S.; Inayatie, Y. D.

2017-05-01

Morphology of perovskite film is a key important for achieving high performance perovskite solar cells. Perovskite films are commonly prepared by two-step spin-coating method. However, pin-holes are frequently formed in perovskite films due to incomplete conversion of lead-iodide (PbI2) into perovskite CH3NH3PbI3. Pin-holes in perovskite film cause large hysteresis in current-voltage curve of solar cells due to large series resistance between perovskite layer-hole transport material. Moreover, crystal structure and grain size of perovskite crystal are also other important parameters for achieving high performance solar cells, which are significantly affected by preparation of perovskite film. We studied the effect of preparation of perovskite film using controlled spin-coating parameters on crystal structure and morphological properties of perovskite film. We used two-step spin-coating method for preparation of perovskite film with varied spinning speed, spinning time and temperature of spin-coating process to control growth of perovskite crystal aimed to produce high quality perovskite crystal with pin-hole free and large grain size. All experiment was performed in air with high humidity (larger than 80%). The best crystal structure, pin-hole free with large grain crystal size of perovskite film was obtained from film prepared at room temperature with spinning speed 1000 rpm for 20 seconds and annealed at 100°C for 300 seconds.

Modeling and Grid Generation of Iced Airfoils

NASA Technical Reports Server (NTRS)

Vickerman, Mary B.; Baez, Marivell; Braun, Donald C.; Hackenberg, Anthony W.; Pennline, James A.; Schilling, Herbert W.

2007-01-01

SmaggIce Version 2.0 is a software toolkit for geometric modeling and grid generation for two-dimensional, singleand multi-element, clean and iced airfoils. A previous version of SmaggIce was described in Preparing and Analyzing Iced Airfoils, NASA Tech Briefs, Vol. 28, No. 8 (August 2004), page 32. To recapitulate: Ice shapes make it difficult to generate quality grids around airfoils, yet these grids are essential for predicting ice-induced complex flow. This software efficiently creates high-quality structured grids with tools that are uniquely tailored for various ice shapes. SmaggIce Version 2.0 significantly enhances the previous version primarily by adding the capability to generate grids for multi-element airfoils. This version of the software is an important step in streamlining the aeronautical analysis of ice airfoils using computational fluid dynamics (CFD) tools. The user may prepare the ice shape, define the flow domain, decompose it into blocks, generate grids, modify/divide/merge blocks, and control grid density and smoothness. All these steps may be performed efficiently even for the difficult glaze and rime ice shapes. Providing the means to generate highly controlled grids near rough ice, the software includes the creation of a wrap-around block (called the "viscous sublayer block"), which is a thin, C-type block around the wake line and iced airfoil. For multi-element airfoils, the software makes use of grids that wrap around and fill in the areas between the viscous sub-layer blocks for all elements that make up the airfoil. A scripting feature records the history of interactive steps, which can be edited and replayed later to produce other grids. Using this version of SmaggIce, ice shape handling and grid generation can become a practical engineering process, rather than a laborious research effort.

Focused-electron-beam-induced processing (FEBIP) for emerging applications in carbon nanoelectronics

NASA Astrophysics Data System (ADS)

Fedorov, Andrei G.; Kim, Songkil; Henry, Mathias; Kulkarni, Dhaval; Tsukruk, Vladimir V.

2014-12-01

Focused-electron-beam-induced processing (FEBIP), a resist-free additive nanomanufacturing technique, is an actively researched method for "direct-write" processing of a wide range of structural and functional nanomaterials, with high degree of spatial and time-domain control. This article attempts to critically assess the FEBIP capabilities and unique value proposition in the context of processing of electronics materials, with a particular emphasis on emerging carbon (i.e., based on graphene and carbon nanotubes) devices and interconnect structures. One of the major hurdles in advancing the carbon-based electronic materials and device fabrication is a disjoint nature of various processing steps involved in making a functional device from the precursor graphene/CNT materials. Not only this multi-step sequence severely limits the throughput and increases the cost, but also dramatically reduces the processing reproducibility and negatively impacts the quality because of possible between-the-step contamination, especially for impurity-susceptible materials such as graphene. The FEBIP provides a unique opportunity to address many challenges of carbon nanoelectronics, especially when it is employed as part of an integrated processing environment based on multiple "beams" of energetic particles, including electrons, photons, and molecules. This avenue is promising from the applications' prospective, as such a multi-functional (electron/photon/molecule beam) enables one to define shapes (patterning), form structures (deposition/etching), and modify (cleaning/doping/annealing) properties with locally resolved control on nanoscale using the same tool without ever changing the processing environment. It thus will have a direct positive impact on enhancing functionality, improving quality and reducing fabrication costs for electronic devices, based on both conventional CMOS and emerging carbon (CNT/graphene) materials.

Microbial quality of industrial liquid egg white: assumptions on spoiling issues in egg-based chilled desserts.

PubMed

Techer, Clarisse; Daoud, Amina; Madec, Marie-Noëlle; Gautier, Michel; Jan, Sophie; Baron, Florence

2015-02-01

As a 1st step, this study aimed at investigating the microbial quality of liquid egg white in a French egg processing company. Thirty raw and 33 pasteurized liquid egg white samples were analyzed. Pasteurization was globally found efficient on mesophilic contaminants (1.7 ± 1.6 and 0.8 ± 0.9 log CFU/mL in raw and pasteurized samples, respectively), including for the control of Salmonella. However, Gram-positive enterococci were still detected in the pasteurized samples. As a 2nd step, a representative bacterial collection was built for exploring the spoilage issue in egg-based chilled desserts. Custard cream was chosen as growth medium since this food is widely used for the production of French chilled desserts. All of the 166 isolates of the bacterial collection were shown to be able to grow and to induce spoilage of the custard cream at refrigeration temperature (10 °C). Several spoilage types were highlighted in the custard cream, on the basis of changes regarding pH, consistency, production of holes or gas. As a 3rd step, bacterial enzymatic activities were explored on custard cream-based agar media. The bacterial collection was reduced to 43 isolates, based on further selection regarding the genera and the spoilage types previously highlighted. Albeit to different degrees, all these isolates were able to produce proteases. A large part of these isolates also expressed lipolytic and amylolytic activities. This study emphasizes the need to control egg white contamination and especially with Gram-positive heat-resistant Enterococi, in order to guarantee the shelf life of egg-based chilled desserts. © 2015 Institute of Food Technologists®

The Impact of Massage Therapy on Function in Pain Populations-A Systematic Review and Meta-Analysis of Randomized Controlled Trials: Part III, Surgical Pain Populations.

PubMed

Boyd, Courtney; Crawford, Cindy; Paat, Charmagne F; Price, Ashley; Xenakis, Lea; Zhang, Weimin

2016-09-01

Pain is multi-dimensional and may be better addressed through a holistic, biopsychosocial approach. Massage therapy is commonly practiced among patients seeking pain management; however, its efficacy is unclear. This systematic review and meta-analysis is the first to rigorously assess the quality of the evidence for massage therapy's efficacy in treating pain, function-related, and health-related quality of life outcomes in surgical pain populations. Key databases were searched from inception through February 2014. Eligible randomized controlled trials were assessed for methodological quality using SIGN 50 Checklist. Meta-analysis was applied at the outcome level. A professionally diverse steering committee interpreted the results to develop recommendations. Twelve high quality and four low quality studies were included in the review. Results indicate massage therapy is effective for treating pain [standardized mean difference (SMD) = -0.79] and anxiety (SMD = -0.57) compared to active comparators. Based on the available evidence, weak recommendations are suggested for massage therapy, compared to active comparators for reducing pain intensity/severity and anxiety in patients undergoing surgical procedures. This review also discusses massage therapy safety, challenges within this research field, how to address identified research gaps, and next steps for future research. © 2016 American Academy of Pain Medicine.

THE JEFFERSON PARISH-LOUISIANA PROJECT - DELIVERING TIME RELEVANT WATER QUALITY INFORMATION TO YOUR COMMUNITY

EPA Science Inventory

The USEPA has developed a handbook to help state and local governmental officials implement near-real-time water quality monitoring and outreach programs with step-by-step instructions on how to: 1) Employ satellite and robotic water monitoring equipment, 2) collect, transfer, an...

Medical physics in radiotherapy: The importance of preserving clinical responsibilities and expanding the profession's role in research, education, and quality control

PubMed Central

Malicki, Julian

2015-01-01

Medical physicists have long had an integral role in radiotherapy. In recent decades, medical physicists have slowly but surely stepped back from direct clinical responsibilities in planning radiotherapy treatments while medical dosimetrists have assumed more responsibility. In this article, I argue against this gradual withdrawal from routine therapy planning. It is essential that physicists be involved, at least to some extent, in treatment planning and clinical dosimetry for each and every patient; otherwise, physicists can no longer be considered clinical specialists. More importantly, this withdrawal could negatively impact treatment quality and patient safety. Medical physicists must have a sound understanding of human anatomy and physiology in order to be competent partners to radiation oncologists. In addition, they must possess a thorough knowledge of the physics of radiation as it interacts with body tissues, and also understand the limitations of the algorithms used in radiotherapy. Medical physicists should also take the lead in evaluating emerging challenges in quality and safety of radiotherapy. In this sense, the input of physicists in clinical audits and risk assessment is crucial. The way forward is to proactively take the necessary steps to maintain and advance our important role in clinical medicine. PMID:25949219

Simultaneous digital quantification and fluorescence-based size characterization of massively parallel sequencing libraries.

PubMed

Laurie, Matthew T; Bertout, Jessica A; Taylor, Sean D; Burton, Joshua N; Shendure, Jay A; Bielas, Jason H

2013-08-01

Due to the high cost of failed runs and suboptimal data yields, quantification and determination of fragment size range are crucial steps in the library preparation process for massively parallel sequencing (or next-generation sequencing). Current library quality control methods commonly involve quantification using real-time quantitative PCR and size determination using gel or capillary electrophoresis. These methods are laborious and subject to a number of significant limitations that can make library calibration unreliable. Herein, we propose and test an alternative method for quality control of sequencing libraries using droplet digital PCR (ddPCR). By exploiting a correlation we have discovered between droplet fluorescence and amplicon size, we achieve the joint quantification and size determination of target DNA with a single ddPCR assay. We demonstrate the accuracy and precision of applying this method to the preparation of sequencing libraries.

High quality factor GaAs-based photonic crystal microcavities by epitaxial re-growth.

PubMed

Prieto, Ivan; Herranz, Jesús; Wewior, Lukasz; González, Yolanda; Alén, Benito; González, Luisa; Postigo, Pablo A

2013-12-16

We investigate L7 photonic crystal microcavities (PCMs) fabricated by epitaxial re-growth of GaAs pre-patterned substrates, containing InAs quantum dots. The resulting PCMs show hexagonal shaped nano-holes due to the development of preferential crystallographic facets during the re-growth step. Through a careful control of the fabrication processes, we demonstrate that the photonic modes are preserved throughout the process. The quality factor (Q) of the photonic modes in the re-grown PCMs strongly depends on the relative orientation between photonic lattice and crystallographic directions. The optical modes of the re-grown PCMs preserve the linear polarization and, for the most favorable orientation, a 36% of the Q measured in PCMs fabricated by the conventional procedure is observed, exhibiting values up to ~6000. The results aim to the future integration of site-controlled QDs with high-Q PCMs for quantum photonics and quantum integrated circuits.

Impact analysis of tap switch out of step for converter transformer

NASA Astrophysics Data System (ADS)

Hong-yue, ZHANG; Zhen-hua, ZHANG; Zhang-xue, XIONG; Gao-wang, YU

2017-06-01

AC transformer load regulation is mainly used to adjust the load side voltage level, improve the quality of power supply, the voltage range is relatively narrow. In DC system, converter transformer is the core equipment of AC and DC power converter and inverter. converter transformer tap adjustment can maintain the normal operation of the converter in small angle range control, the absorption of reactive power, economic operation, valve less stress, valve damping circuit loss, AC / DC harmonic component is also smaller. In this way, the tap switch action is more frequent, and a large range of the tap switch adjustment is required. Converter transformer with a more load voltage regulation switch, the voltage regulation range of the switch is generally 20~30%, the adjustment of each file is 1%~2%. Recently it is often found that the tap switch of Converter Transformers is out of step in Converter station. In this paper, it is analyzed in detail the impact of tap switch out of step for differential protection, overexcitation protection and zero sequence over current protection. Analysis results show that: the tap switch out of step has no effect on the differential protection and the overexcitation protection including the tap switch. But the tap switch out of step has effect on zero sequence overcurrent protection of out of step star-angle converter transformer. The zero sequence overcurrent protection will trip when the tap switch out of step is greater than 3 for out of step star-angle converter transformer.

Detection Methodologies for Pathogen and Toxins: A Review.

PubMed

Alahi, Md Eshrat E; Mukhopadhyay, Subhas Chandra

2017-08-16

Pathogen and toxin-contaminated foods and beverages are a major source of illnesses, even death, and have a significant economic impact worldwide. Human health is always under a potential threat, including from biological warfare, due to these dangerous pathogens. The agricultural and food production chain consists of many steps such as harvesting, handling, processing, packaging, storage, distribution, preparation, and consumption. Each step is susceptible to threats of environmental contamination or failure to safeguard the processes. The production process can be controlled in the food and agricultural sector, where smart sensors can play a major role, ensuring greater food quality and safety by low cost, fast, reliable, and profitable methods of detection. Techniques for the detection of pathogens and toxins may vary in cost, size, and specificity, speed of response, sensitivity, and precision. Smart sensors can detect, analyse and quantify at molecular levels contents of different biological origin and ensure quality of foods against spiking with pesticides, fertilizers, dioxin, modified organisms, anti-nutrients, allergens, drugs and so on. This paper reviews different methodologies to detect pathogens and toxins in foods and beverages.

Towards quality by design in pharmaceutical manufacturing: modelling and control of air jet mills

NASA Astrophysics Data System (ADS)

Bhonsale, Satyajeet; Telen, Dries; Stokbroekx, Bard; Van Impe, Jan

2017-06-01

Milling is an important step in pharmaceutical manufacturing as it not only determines the final formulation of the drug product, but also influences the bioavailability and dissolution rate of the active pharmaceutical ingredient (API). In this respect, the air jet mill (AJM) is most commonly used in the pharmaceutical industry as it is a non-contaminating and non-degrading self-classifying process capable of delivering narrow particle size distributions (PSD). Keeping the principles of Quality by Design in mind, the Critical Process Parameters (CPPs) of the AJM have been identified to be the pressures at the grinding nozzles, and the feed rate which affect the PSD, surface charge and the morphology of the product (i.e. the Critical Material Attributes (CMAs)). For the purpose of this research, the PSD is considered to be the only relevant CMA. A population balance based model is proposed to simulate the dynamics milling operation by utilizing the concept of breakage functions. This model agrees qualitatively with experimental observations of the air jet mill unit present at Janssen Pharmaceutica but further steps for model validation need to be carried out.

Development of terminology for mammographic techniques for radiological technologists.

PubMed

Yagahara, Ayako; Yokooka, Yuki; Tsuji, Shintaro; Nishimoto, Naoki; Uesugi, Masahito; Muto, Hiroshi; Ohba, Hisateru; Kurowarabi, Kunio; Ogasawara, Katsuhiko

2011-07-01

We are developing a mammographic ontology to share knowledge of the mammographic domain for radiologic technologists, with the aim of improving mammographic techniques. As a first step in constructing the ontology, we used mammography reference books to establish mammographic terminology for identifying currently available knowledge. This study proceeded in three steps: (1) determination of the domain and scope of the terminology, (2) lexical extraction, and (3) construction of hierarchical structures. We extracted terms mainly from three reference books and constructed the hierarchical structures manually. We compared features of the terms extracted from the three reference books. We constructed a terminology consisting of 440 subclasses grouped into 19 top-level classes: anatomic entity, image quality factor, findings, material, risk, breast, histological classification of breast tumors, role, foreign body, mammographic technique, physics, purpose of mammography examination, explanation of mammography examination, image development, abbreviation, quality control, equipment, interpretation, and evaluation of clinical imaging. The number of terms that occurred in the subclasses varied depending on which reference book was used. We developed a terminology of mammographic techniques for radiologic technologists consisting of 440 terms.

[Evaluation of social medicine expert assessment].

PubMed

Piechowiak, H

1989-10-01

There are only few scientific publications in literature on medical expertising in social medicine. Although this deficit may be explained by several facts, it cannot be justified. Evaluation is a systematic set of data collection and analysis activities undertaken to place social practice on a more rational basis, i.e. greater efficiency and justice. These aims also hold good for social medicine. Evaluation, however, is only the first step within a broader research programme for quality control and quality improvement efforts, which can be successfully performed only in cooperation with the social insurance institutions. Within their medical services these institutions should provide the organisational prerequisites to enable qualified scientific research in practical social medicine.

Assessment of hand hygiene techniques using the World Health Organization's six steps.

PubMed

Arias, Ariadna V; Garcell, Humberto G; Ochoa, Yagdeline R; Arias, Katiana F; Miranda, Fernando R

2016-01-01

The quality of hand hygiene was evaluated via direct observation for compliance with the six recommended World Health Organization steps. A total of 2497 HH opportunities, of which 1573 (63.0%) were hand rubs, were monitored over a five month period. Compliance was higher in nurses compared with physicians and auxiliaries and in steps 1 and 2 for hand rubs as well as the first three steps of hand washing, with lower rates after these steps. Rubbing of the thumbs and fingertips achieved the lowest rates of compliance in both HH types. A combination of the five recommended moments and six steps and staff education is recommended to improve the quality of hand hygiene. Copyright © 2015 King Saud Bin Abdulaziz University for Health Sciences. Published by Elsevier Ltd. All rights reserved.

Sleep disturbance linked to suicidal ideation in postural orthostatic tachycardia syndrome

PubMed Central

Pederson, Cathy Lynn; Blettner Brook, Jill

2017-01-01

Objective We investigated the prevalence of suicidal ideation in relationship with symptoms of sleep disruption in people with postural orthostatic tachycardia syndrome (POTS). Methods Online surveys (including the Pittsburgh Sleep Quality Index and the Suicide Behaviors Questionnaire – Revised) were completed by 705 POTS patients and 170 non-POTS controls. Results Poor sleep quality was reported in 98.4% of POTS patients with a calculated subjective sleep efficiency of 65.4%. The POTS group’s sleep efficiency was significantly lower (t[873]= −11.32; p<0.001) and sleep disturbances because of pain were significantly higher (t[873]=15.36; p<0.001) than controls. Chi-square testing showed a larger proportion of individuals at high-risk for suicide among POTS patients than controls (c2 [1, n=875]=55.6; p<0.001). Multiple linear regression analysis showed that sleep scores (β=0.23, p<0.001), age (β=–0.03, p<0.001), and illness with POTS (β=0.68, p=0.05) were significantly associated with suicide ideation scores (F[4, 870]=38.34, p<0.001). This model explained 15% of variance (R2=0.15) in suicidal ideation scores. Conclusion Patients with POTS may suffer from increased sleep disturbance and suicidal ideation compared with the general population. Treatment to improve sleep efficiency and sleep quality is an important step toward better quality of life for POTS patients. PMID:28442939

Building capacity for sustainable research programmes for cancer in Africa.

PubMed

Adewole, Isaac; Martin, Damali N; Williams, Makeda J; Adebamowo, Clement; Bhatia, Kishor; Berling, Christine; Casper, Corey; Elshamy, Karima; Elzawawy, Ahmed; Lawlor, Rita T; Legood, Rosa; Mbulaiteye, Sam M; Odedina, Folakemi T; Olopade, Olufunmilayo I; Olopade, Christopher O; Parkin, Donald M; Rebbeck, Timothy R; Ross, Hana; Santini, Luiz A; Torode, Julie; Trimble, Edward L; Wild, Christopher P; Young, Annie M; Kerr, David J

2014-05-01

Cancer research in Africa will have a pivotal role in cancer control planning in this continent. However, environments (such as those in academic or clinical settings) with limited research infrastructure (laboratories, biorespositories, databases) coupled with inadequate funding and other resources have hampered African scientists from carrying out rigorous research. In September 2012, over 100 scientists with expertise in cancer research in Africa met in London to discuss the challenges in performing high-quality research, and to formulate the next steps for building sustainable, comprehensive and multi-disciplinary programmes relevant to Africa. This was the first meeting among five major organizations: the African Organisation for Research and Training in Africa (AORTIC), the Africa Oxford Cancer Foundation (AfrOx), and the National Cancer Institutes (NCI) of Brazil, France and the USA. This article summarizes the discussions and recommendations of this meeting, including the next steps required to create sustainable and impactful research programmes that will enable evidenced-based cancer control approaches and planning at the local, regional and national levels.

Building capacity for sustainable research programmes for cancer in Africa

PubMed Central

Adewole, Isaac; Martin, Damali N.; Williams, Makeda J.; Adebamowo, Clement; Bhatia, Kishor; Berling, Christine; Casper, Corey; Elshamy, Karima; Elzawawy, Ahmed; Lawlor, Rita T.; Legood, Rosa; Mbulaiteye, Sam M.; Odedina, Folakemi T.; Olopade, Olufunmilayo I.; Olopade, Christopher O.; Parkin, Donald M.; Rebbeck, Timothy R.; Ross, Hana; Santini, Luiz A.; Torode, Julie; Trimble, Edward L.; Wild, Christopher P.; Young, Annie M.; Kerr, David J.

2015-01-01

Cancer research in Africa will have a pivotal role in cancer control planning in this continent. However, environments (such as those in academic or clinical settings) with limited research infrastructure (laboratories, biorespositories, databases) coupled with inadequate funding and other resources have hampered African scientists from carrying out rigorous research. In September 2012, over 100 scientists with expertise in cancer research in Africa met in London to discuss the challenges in performing high-quality research, and to formulate the next steps for building sustainable, comprehensive and multi-disciplinary programmes relevant to Africa. This was the first meeting among five major organizations: the African Organisation for Research and Training in Africa (AORTIC), the Africa Oxford Cancer Foundation (AfrOx), and the National Cancer Institutes (NCI) of Brazil, France and the USA. This article summarizes the discussions and recommendations of this meeting, including the next steps required to create sustainable and impactful research programmes that will enable evidenced-based cancer control approaches and planning at the local, regional and national levels. PMID:24614139

The Not4 E3 Ligase and CCR4 Deadenylase Play Distinct Roles in Protein Quality Control

PubMed Central

Halter, David; Collart, Martine A.; Panasenko, Olesya O.

2014-01-01

Eukaryotic cells control their proteome by regulating protein production and protein clearance. Protein production is determined to a large extent by mRNA levels, whereas protein degradation depends mostly upon the proteasome. Dysfunction of the proteasome leads to the accumulation of non-functional proteins that can aggregate, be toxic for the cell, and, in extreme cases, lead to cell death. mRNA levels are controlled by their rates of synthesis and degradation. Recent evidence indicates that these rates have oppositely co-evolved to ensure appropriate mRNA levels. This opposite co-evolution has been correlated with the mutations in the Ccr4-Not complex. Consistently, the deadenylation enzymes responsible for the rate-limiting step in eukaryotic mRNA degradation, Caf1 and Ccr4, are subunits of the Ccr4-Not complex. Another subunit of this complex is a RING E3 ligase, Not4. It is essential for cellular protein solubility and has been proposed to be involved in co-translational quality control. An open question has been whether this role of Not4 resides strictly in the regulation of the deadenylation module of the Ccr4-Not complex. However, Not4 is important for proper assembly of the proteasome, and the Ccr4-Not complex may have multiple functional modules that participate in protein quality control in different ways. In this work we studied how the functions of the Caf1/Ccr4 and Not4 modules are connected. We concluded that Not4 plays a role in protein quality control independently of the Ccr4 deadenylase, and that it is involved in clearance of aberrant proteins at least in part via the proteasome. PMID:24465968

Quality Control Review of the Defense Contract Management Agency Internal Review Audit Function

DTIC Science & Technology

2013-04-18

DMI-2011-001, “Audit of DCMA Telework Program,” November 29, 2011, we identified issues with independence. For the Audit of DCMA Telework Program...and Audit of DCMA Telework Program, we identified issues with audit planning. Specifically, we found that both audits did not include documentation...of fraud risks had been performed during audit planning. For the audit of the DCMA Telework Program, steps were added to the audit program to

Ultrasmooth Quantum Dot Micropatterns by a Facile Controllable Liquid-Transfer Approach: Low-Cost Fabrication of High-Performance QLED.

PubMed

Zhang, Min; Hu, Binbin; Meng, Lili; Bian, Ruixin; Wang, Siyuan; Wang, Yunjun; Liu, Huan; Jiang, Lei

2018-06-26

Fabrication of a high quality quantum dot (QD) film is essentially important for a high-performance QD light emitting diode display (QLED) device. It is normally a high-cost and multiple-step solution-transfer process where large amounts of QDs were needed but with only limited usefulness. Thus, developing a simple, efficient, and low-cost approach to fabricate high-quality micropatterned QD film is urgently needed. Here, we proposed that the Chinese brush enables the controllable transfer of a QD solution directly onto a homogeneous and ultrasmooth micropatterned film in one step. It is proposed that the dynamic balance of QDs was enabled during the entire solution transfer process under the cooperative effect of Marangoni flow aroused by the asymmetric solvent evaporation and the Laplace pressure different by conical fibers. By this approach, QD nanoparticles were homogeneously transferred onto the desired area on the substrate. The as-prepared QLED devices show rather high performances with the current efficiencies of 72.38, 26.03, and 4.26 cd/A and external quantum efficiencies of 17.40, 18.96, and 6.20% for the green, red, and blue QLED devices, respectively. We envision that the result offers a low-cost, facile, and practically applicable solution-processing approach that works even in air for fabricating high-performance QLED devices.

Molecular mechanism of ER stress-induced pre-emptive quality control involving association of the translocon, Derlin-1, and HRD1.

PubMed

Kadowaki, Hisae; Satrimafitrah, Pasjan; Takami, Yasunari; Nishitoh, Hideki

2018-05-09

The maintenance of endoplasmic reticulum (ER) homeostasis is essential for cell function. ER stress-induced pre-emptive quality control (ERpQC) helps alleviate the burden to a stressed ER by limiting further protein loading. We have previously reported the mechanisms of ERpQC, which includes a rerouting step and a degradation step. Under ER stress conditions, Derlin family proteins (Derlins), which are components of ER-associated degradation, reroute specific ER-targeting proteins to the cytosol. Newly synthesized rerouted polypeptides are degraded via the cytosolic chaperone Bag6 and the AAA-ATPase p97 in the ubiquitin-proteasome system. However, the mechanisms by which ER-targeting proteins are rerouted from the ER translocation pathway to the cytosolic degradation pathway and how the E3 ligase ubiquitinates ERpQC substrates remain unclear. Here, we show that ERpQC substrates are captured by the carboxyl-terminus region of Derlin-1 and ubiquitinated by the HRD1 E3 ubiquitin ligase prior to degradation. Moreover, HRD1 forms a large ERpQC-related complex composed of Sec61α and Derlin-1 during ER stress. These findings indicate that the association of the degradation factor HRD1 with the translocon and the rerouting factor Derlin-1 may be necessary for the smooth and effective clearance of ERpQC substrates.

Social and behavioral interventions for improving quality of life of HIV infected people receiving antiretroviral therapy: a systematic review and meta-analysis.

PubMed

Bhatta, Dharma Nand; Liabsuetrakul, Tippawan; McNeil, Edward B

2017-04-24

Improvement in quality of life is crucial for HIV infected people. Social and behavioral interventions have been implemented in different contexts to improve the quality of life among HIV infected people. This review appraises the evidence for available interventions that focused on quality of life of HIV infected people receiving antiretroviral therapy (ART). We searched electronic databases for randomized controlled trials of interventions to improve the quality of life of HIV infected people receiving ART. We searched PUBMED and the Cochrane Centre Register of Controlled Trials (CENTRAL) with the terms "social", "behavioral", "educational", "quality of life", "HIV", and "RCT". Searches were conducted for articles published from 1980 to December 16, 2015. Standardized data abstraction methods and searching steps were applied. Twenty-eight studies reported the impact of social or behavioral interventions in quality of life among HIV infected people, of which 15 were conducted in United States of America. A total of 4136 participants were enrolled. Of the 28 studies, four studies included females, two studies included males and remaining studies excluded both males and females. The overall reported methodological quality of the studies was subject to a high risk of bias and the study criteria were unclear in most studies. Twenty-one studies reported a significant intervention effect on at least one quality of life domain. Meta-analyses showed significant improvement in general health, mental health, physical function and environment domains of quality of life among intervention groups. However, the expected impact of the intervention was low to moderate because the rigorousness of the studies was low, information was limited, the sample sizes were small and other the quality of the study designs were poor. Although the available evidence suggests that existing social and behavioral interventions can improve some quality of life domains, the quality of evidence was insufficient to support the notion that these interventions can improve the overall quality of life of HIV infected people receiving ART. Well-designed and rigorous randomized controlled trials with high methodological quality are required.

Parenting Intervention Combined With Acceptance and Commitment Therapy: A Trial With Families of Children With Cerebral Palsy.

PubMed

Whittingham, Koa; Sanders, Matthew R; McKinlay, Lynne; Boyd, Roslyn N

2016-06-01

To examine the effects of Stepping Stones Triple P (SSTP) and Acceptance and Commitment Therapy (ACT) on child functioning, quality of life, and parental adjustment. 67 parents (97.0% mothers) of children (64.2% male; mean age 5.3 ± 3.0 years) with cerebral palsy participated in a randomized controlled trial with three groups: wait-list control, SSTP, and SSTP + ACT. This article details the secondary outcomes. In comparison with wait-list, the SSTP + ACT group showed increased functional performance and quality of life as well as decreased parental psychological symptoms. No differences were found for parental confidence. No differences were found between SSTP and wait-list or between SSTP and SSTP + ACT. ACT-integrated parenting intervention may be an effective way to target child functioning, quality of life, and parental adjustment. © The Author 2015. Published by Oxford University Press on behalf of the Society of Pediatric Psychology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Designing an in-situ ultrasonic nondestructive evaluation system for ultrasonic additive manufacturing

NASA Astrophysics Data System (ADS)

Nadimpalli, Venkata K.; Nagy, Peter B.

2018-04-01

Ultrasonic Additive Manufacturing (UAM) is a solid-state layer by layer manufacturing process that utilizes vibration induced plastic deformation to form a metallurgical bond between a thin layer and an existing base structure. Due to the vibration based bonding mechanism, the quality of components at each layer depends on the geometry of the structure. In-situ monitoring during and between UAM manufacturing steps offers the potential for closed-loop control to optimize process parameters and to repair existing defects. One interface that is most prone to delamination is the base/build interface and often UAM component height and quality are limited by failure at the base/build interface. Low manufacturing temperatures and favorable orientation of typical interface defects in UAM make ultrasonic NDE an attractive candidate for online monitoring. Two approaches for in-situ NDE are discussed and the design of the monitoring system optimized so that the quality of UAM components is not affected by the addition of the NDE setup. Preliminary results from in-situ ultrasonic NDE indicate the potential to be utilized for online qualification, closed-loop control and offline certification of UAM components.

Toward Cost-Effective Manufacturing of Silicon Solar Cells: Electrodeposition of High-Quality Si Films in a CaCl2 -based Molten Salt.

PubMed

Yang, Xiao; Ji, Li; Zou, Xingli; Lim, Taeho; Zhao, Ji; Yu, Edward T; Bard, Allen J

2017-11-20

Electrodeposition of Si films from a Si-containing electrolyte is a cost-effective approach for the manufacturing of solar cells. Proposals relying on fluoride-based molten salts have suffered from low product quality due to difficulties in impurity control. Here we demonstrate the successful electrodeposition of high-quality Si films from a CaCl 2 -based molten salt. Soluble Si IV -O anions generated from solid SiO 2 are electrodeposited onto a graphite substrate to form a dense film of crystalline Si. Impurities in the deposited Si film are controlled at low concentrations (both B and P are less than 1 ppm). In the photoelectrochemical measurements, the film shows p-type semiconductor character and large photocurrent. A p-n junction fabricated from the deposited Si film exhibits clear photovoltaic effects. This study represents the first step to the ultimate goal of developing a cost-effective manufacturing process for Si solar cells based on electrodeposition. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Thermal Optimization of Growth and Quality in Protein Crystals

NASA Technical Reports Server (NTRS)

Wiencek, John M.

1996-01-01

Experimental evidence suggests that larger and higher quality crystals can be attained in the microgravity of space; however, the effect of growth rate on protein crystal quality is not well documented. This research is the first step towards providing strategies to grow crystals under constant rates of growth. Controlling growth rates at a constant value allows for direct one-to-one comparison of results obtained in microgravity and on earth. The overall goal of the project was to control supersaturation at a constant value during protein crystal growth by varying temperature in a predetermined manner. Applying appropriate theory requires knowledge of specific physicochemical properties of the protein solution including the effect of supersaturation on growth rates and the effect of temperature on protein solubility. Such measurements typically require gram quantities of protein and many months of data acquisition. A second goal of the project applied microcalorimetry for the rapid determination of these physicochemical properties using a minimum amount of protein. These two goals were successfully implemented on hen egg-white lysozyme. Results of these studies are described in the attached reprints.

The Quality and Validation of Structures from Structural Genomics

PubMed Central

Domagalski, Marcin J.; Zheng, Heping; Zimmerman, Matthew D.; Dauter, Zbigniew; Wlodawer, Alexander; Minor, Wladek

2014-01-01

Quality control of three-dimensional structures of macromolecules is a critical step to ensure the integrity of structural biology data, especially those produced by structural genomics centers. Whereas the Protein Data Bank (PDB) has proven to be a remarkable success overall, the inconsistent quality of structures reveals a lack of universal standards for structure/deposit validation. Here, we review the state-of-the-art methods used in macromolecular structure validation, focusing on validation of structures determined by X-ray crystallography. We describe some general protocols used in the rebuilding and re-refinement of problematic structural models. We also briefly discuss some frontier areas of structure validation, including refinement of protein–ligand complexes, automation of structure redetermination, and the use of NMR structures and computational models to solve X-ray crystal structures by molecular replacement. PMID:24203341

A Quality Classification System for Young Hardwood Trees - The First Step in Predicting Future Products

Treesearch

David L. Sonderman; Robert L. Brisbin

1978-01-01

Forest managers have no objective way to determine the relative value of culturally treated forest stands in terms of product potential. This paper describes the first step in the development of a quality classification system based on the measurement of individual tree characteristics for young hardwood stands.

The CERCA School Report Card: Communities Creating Education Quality. Implementation Manual

ERIC Educational Resources Information Center

Guio, Ana Florez; Chesterfield, Ray; Siri, Carmen

2006-01-01

This manual provides a step-by-step methodology for promoting community participation in improving learning in local schools. The Civic Engagement for Education Reform in Central America (CERCA) School Report Card (SRC) approach empowers local school communities to gather information on the quality and conditions of teaching and learning in their…

Supporting Success: Why and How to Improve Quality in After-School Programs

ERIC Educational Resources Information Center

Sheldon, Jessica; Hopkins, Leigh

2008-01-01

This report examines the program improvement strategies, step-by-step, that allowed The James Irvine Foundation's Communities Organizing to Advance Learning (CORAL) initiative to achieve the levels of quality needed to boost the academic success of participating students, and makes policy and funding suggestions for improving program performance.…

Extraneous agents testing for substrates of avian origin and viral vaccines for poultry: current provisions and proposals for future approaches.

PubMed

Jungbäck, Carmen; Motitschke, Andreas

2010-05-01

In the 1970s the European Pharmacopoeia (Ph. Eur.) established the first requirements for testing starting materials for vaccines and the vaccines themselves. These requirements also cover testing for freedom from extraneous agents of specific pathogen free (SPF) chicken flocks, the embryonated eggs derived from them and viral vaccines for poultry. This was the first common European approach initiated by the Ph. Eur. as an institution of the Council of Europe and it was the beginning of building a scientific basis for vaccine quality. In the following years, the increasingly detailed requirements concerning viral purity also impacted viral vaccines for poultry, SPF chicken flocks and the embryonated eggs derived from them. The core of these requirements is formed by the list of extraneous agents that must be tested for and the accepted test methods. In the early 1990s and in 2004, the next steps were taken towards the harmonization of quality regulations for the production and testing of veterinary immunological products, this time at the level of the European Community. With the first step, good manufacturing practices (GMP) and good laboratory practices (GLP) were introduced, ensuring more consistent production, validation of production procedures and testing. The next step introduced the risk assessment, which covers the evaluation of the quality of production and control. The intention of these efforts is to contribute to the quality, safety and purity of the products placed on the market. It makes sense that, based on the outcome of the risk-evaluation, a reduction of in-process and final product testing may be called for in certain cases. However, despite the fact that the quality of the starting materials and vaccines has been increased over the years, the provisions of the Ph. Eur. have not been adjusted. Progress made by the manufacturers of starting materials and vaccines with respect to increasing the quality of their products should be recognised. This review gives an analysis of the current provisions of the Ph. Eur. and makes some proposals on how the requirements concerning the testing of extraneous agents could be modified to take into consideration the increase in quality that has been achieved over the past few decades. 2010 The International Association for Biologicals. Published by Elsevier Ltd. All rights reserved.

Complete Quantum Control of a Single Silicon-Vacancy Center in a Diamond Nanopillar

NASA Astrophysics Data System (ADS)

Zhang, Jingyuan Linda; Lagoudakis, Konstantinos G.; Tzeng, Yan-Kai; Dory, Constantin; Radulaski, Marina; Kelaita, Yousif; Shen, Zhi-Xun; Melosh, Nicholas A.; Chu, Steven; Vuckovic, Jelena

Coherent quantum control of a quantum bit (qubit) is an important step towards its use in a quantum network. SiV- center in diamond offers excellent physical qualities such as low inhomogeneous broadening, fast photon emission, and a large Debye-Waller factor, while the fast spin manipulation and techniques to extend the spin coherence time are under active investigation. Here, we demonstrate full coherent control over the state of a single SiV- center in a diamond nanopillar using ultrafast optical pulses. The high quality of the chemical vapor deposition grown SiV- centers allows us to coherently manipulate and quasi-resonantly read out the state of the single SiV- center. Moreover, the SiV- centers being coherently controlled are integrated into diamond nanopillar arrays in a site-controlled, individually addressable manner with high yield, low strain, and high spectral stability, which paves the way for scalable on chip optically accessible quantum system in a quantum photonic network. Financial support is provided by the DOE Office of Basic Energy Sciences, Division of Materials Sciences through Stanford Institute for Materials and Energy Sciences (SIMES) under contract DE-AC02-76SF00515.

Description of movement quality in patients with low back pain: A qualitative study as a first step to a practical definition.

PubMed

van Dijk, Margriet J H; Smorenburg, Nienke T A; Visser, Bart; Nijhuis-van der Sanden, Maria W G; Heerkens, Yvonne F

2017-03-01

As a first step to formulate a practical definition for movement quality (MQ), this study aims to explore how Dutch allied health care professionals (AHCPs) describe MQ of daily life activities in patients with low back pain (LBP). In this qualitative cross-sectional digital survey study, Dutch AHCPs (n = 91) described MQ in open text (n = 91) and with three keywords (n = 90). After exploratory qualitative content analysis, the ICF linking rules (International Classification of Functioning, Disability and Health) were applied to classify MQ descriptions and keywords. The identified meaningful concepts (MCs) of the descriptions (274) and keywords (239) were linked to ICF codes (87.5% and 80.3%, respectively), Personal factors (5.8% and 5.9%, respectively), and supplementary codes (6.6% and 13.8%, respectively). The MCs were linked to a total of 31 ICF codes, especially to b760 'control of voluntary movement functions', b7602 'coordination of voluntary movements', d4 'Mobility', and d230 'carry out daily routine'. Negative and positive formulated descriptions elucidated different MQ interpretations. Descriptions of MQ given by Dutch AHCPs in patients with LBP cover all ICF components. Coordination and functional movements are seen as the most elementary concepts of MQ. Variation in MQ descriptions and interpretations hinders defining MQ and indicates the necessity of additional steps.

Implementation of three dimensional conformal radiation therapy: prospects, opportunities, and challenges.

PubMed

Vijayakumar, S; Chen, G T

1995-12-01

To briefly review scientific rationale of 3D conformal radiation therapy (3DCRT) and discuss the prospects, opportunities, and challenges in the implementation of 3DCRT. Some of these ideas were discussed during a workshop on "Implementation of Three-Dimensional Conformal Radiation Therapy" in April 1994 at Bethesda, MD, and others have been discussed elsewhere in the literature. Local-regional control of cancer is an important component in the overall treatment strategy in any patient with cancer. It has been shown that failure to achieve local-regional control can lead to (a) an increase in chances of distant metastases, and (b) a decrease in the survival. In many disease sites, the doses delivered currently are inadequate to achieve satisfactory local tumor control rates; this is because in many sites, only limited doses of radiotherapy can be delivered due to the proximity of cancer to radiosensitive normal tissues. By conforming the radiotherapy beams to the tumor, doses to the tumors can be enhanced and doses to the normal tissues can be reduced. With the advances in 3DCRT, such conformation is possible now and is the rationale for using 3DCRT. However, a number of questions do remain that are not limited to the following: (a) What are the implications in terms of target volume definitions when implementing 3DCRT? (b) Are there some sites where research efforts can be focused to document the efficacy and cost effectiveness of 3DCRT? (c) How do we implement day-to-day 3DCRT treatment efficiently? (d) How do we transfer the technology from the university centers to the community without compromising quality? (e) What are all the quality assurance/quality improvement questions that need to be addressed and how do we ascertain quality assurance of 3DCRT? (f) Have we looked at cost-benefit ratios and quality of life (QOL) issues closely? There is a need for defining multiple target volumes: gross tumor volume, clinical target volume(s), and planning target volume(s). Such definitions should make implementation of 3DCRT more complex, yet will make high-dose delivery a possibility. There are many sites in which single and multiinstitutional studies are ongoing that include prostate, lung, head and neck, and brain. In other areas, cooperative group trials are required because of the inability of single institutions to accrue enough patients to answer clinically relevant questions with statistical validity. Although implementation of 3DCRT will require multiple steps, these multiple steps can be brought into clinical practice gradually and one does not have to wait until all steps required for implementation of 3DCRT are available. In this respect, "3DCRT" should be used in a very broad sense, from beam's eye view blocking, use of multibeam dose distribution, use of dose-volume histograms in choosing alternative plans, noncoplanar beam arrangements, intensity modulation, inverse planning, to totally automated implementation of 3DCRT. To transfer the 3DCRT capabilities to the community from the University Centers, there is a necessity to develop quality assurance programs. RTOG and the Three-Dimensional Oncology Group are spearheading these efforts. Three-dimensional conformal radiation therapy has potential not only to improve local control and decrease toxicity, but also to improve the cost benefit ratio in the use of radiotherapy as well as in improving quality of life in patients with cancer. Achieving many potential benefits of 3DCRT (improvement in local control, decreasing toxicity, organs-function preservation, improvement in cost effectiveness) will require further physics-related and clinical research in carefully conceived and successfully completed future clinical trials.

Do medical student stress, health, or quality of life foretell step 1 scores? A comparison of students in traditional and revised preclinical curricula.

PubMed

Tucker, Phebe; Jeon-Slaughter, Haekyung; Sener, Ugur; Arvidson, Megan; Khalafian, Andrey

2015-01-01

We explored the theory that measures of medical students' well-being and stress from different types of preclinical curricula are linked with performance on standardized assessment. Self-reported stress and quality of life among sophomore medical students having different types of preclinical curricula will vary in their relationships to USMLE Step 1 scores. Voluntary surveys in 2010 and 2011 compared self-reported stress, physical and mental health, and quality of life with Step 1 scores for beginning sophomore students in the final year of a traditional, discipline-based curriculum and the 1st year of a revised, systems-based curriculum with changed grading system. Wilcoxon rank sum tests and Spearman rank correlations were used to analyze data, significant at p <.05. New curriculum students reported worse physical health, subjective feelings, leisure activities, social relationships and morale, and more depressive symptoms and life stress than traditional curriculum students. However, among curriculum-related stressors, few differences emerged; revised curriculum sophomores reported less stress working with real and standardized patients than traditional students. There were no class differences in respondents' Step 1 scores. Among emotional and physical health measures, only feelings of morale correlated negatively with Step 1 performance. Revised curriculum students' Step 1 scores correlated negatively with stress from difficulty of coursework. Although revised curriculum students reported worse quality of life, general stress, and health and less stress from patient interactions than traditional students, few measures were associated with performance differences on Step 1. Moreover, curriculum type did not appear to either hinder or help students' Step 1 performance. To identify and help students at risk for academic problems, future assessments of correlates of Step 1 performance should be repeated after the new curriculum is well established, relating them also to performance on other standardized assessments of communication skills, professionalism, and later clinical evaluations in clerkships or internships.

Assessing the Fauna of Aquatic Insects for Possible Use for Malaria Vector Control in Large River, Central Iran.

PubMed

Shayeghi, Mansoureh; Nejati, Jalil; Shirani-Bidabadi, Leila; Koosha, Mona; Badakhshan, Mehdi; Mohammadi Bavani, Mulood; Arzamani, Kourosh; Choubdar, Nayyereh; Bagheri, Fatemeh; Saghafipour, Abedin; Veysi, Arshad; Karimian, Fateh; Akhavan, Amir Ahamd; Vatandoost, Hassan

2015-01-01

Insects with over 30,000 aquatic species are known as very successful arthropods in freshwater habitats. Some of them are applied as biological indicators for water quality control, as well as the main food supply for fishes and amphibians. The faunistic studies are the basic step in entomological researches; the current study was carried out emphasizing on the fauna of aquatic insects in Karaj River, northern Iran. A field study was carried out in six various sampling site of Karaj River during spring 2013. The aquatic insects were collected using several methods such as D-frame nets, dipping and direct search on river floor stones. Specimens were collected and preserved in Ethanol and identified by standard identification keys. Totally, 211 samples were collected belonging to three orders; Plecoptera, Trichoptera and Ephemeroptera. Seven genuses (Perla, Isoperla, Hydropsyche, Cheumatopsyche, Baetis, Heptagenia and Maccafferium) from five families (Perlidae, Perlodidae, Hydropsychidae, Batidae, Heptagenidae) were identified. The most predominant order was Plecoptera followed by Trichoptera. Karaj River is a main and important river, which provides almost all of water of Karaj dam. So, identification of aquatic species which exist in this river is vital and further studies about systematic and ecological investigations should be performed. Also, monitoring of aquatic biota by trained health personnel can be a critical step to describe water quality in this river. Understanding the fauna of aquatic insects will provide a clue for possible biological control of medically important aquatic insects such as Anopheles as the malaria vectors.

Behaviors of providers of traditional korean medicine therapy and complementary and alternative medicine therapy for the treatment of cancer patients.

PubMed

Yu, Jun-Sang; Kim, Chun-Bae; Kim, Ki-Kyong; Lee, Ji-Eun; Kim, Min-Young

2015-03-01

In Korea, cancer is one of the most important causes of death. Cancer patients have sought alternative methods, like complementary and alternative medicine (CAM) together with Western medicine, to treat cancer. Also, there are many kinds of providers of CAM therapy, including providers of Korean oriental medicine therapy. The purpose of this study is to identify the behaviors of Korean oriental medicine therapy and CAM therapy providers who treat cancer patients and to provide background knowledge for establishing a new policy with the management and quality control of CAM. Structured and well organized questionnaires were made, and 350 persons were surveyed concerning the providers of CAM or Korean oriental medicine. The questionnaires were collected and analyzed. The questionnaires (182) were collected. The questionnaires identified a total of 73 known providers, such as medicinal professionals or other providers of CAM suppliers, 35.6% of whom had had experience with treating cancer patients (52.6% vs. 29.6%). The treatment methods were a little different: alternative therapy and nutritional therapy being preferred by medicinal professionals and mind body modulation therapy and alternative therapy being preferred by other CAM providers. Four patients (7.4%) experienced side effects, and 6 patients (12.5%) experienced legal problems. As the method for managing the therapy, CAM providers, medicinal professionals, and other CAM providers had different viewpoints. For example, some CAM providers stated that both legislation and an official education on CAM or a national examination were needed as a first step to establish the provider's qualifications and that as a second step, a license test was needed for quality control. To the contrary, medicinal professionals stated that a license test was needed before legislation. Adequate management and quality control of CAM providers is thought to involve both education and legislation.

Quality Indicators in Laboratory Medicine: from theory to practice. Preliminary data from the IFCC Working Group Project "Laboratory Errors and Patient Safety".

PubMed

Sciacovelli, Laura; O'Kane, Maurice; Skaik, Younis Abdelwahab; Caciagli, Patrizio; Pellegrini, Cristina; Da Rin, Giorgio; Ivanov, Agnes; Ghys, Timothy; Plebani, Mario

2011-05-01

The adoption of Quality Indicators (QIs) has prompted the development of tools to measure and evaluate the quality and effectiveness of laboratory testing, first in the hospital setting and subsequently in ambulatory and other care settings. While Laboratory Medicine has an important role in the delivery of high-quality care, no consensus exists as yet on the use of QIs focussing on all steps of the laboratory total testing process (TTP), and further research in this area is required. In order to reduce errors in laboratory testing, the IFCC Working Group on "Laboratory Errors and Patient Safety" (WG-LEPS) developed a series of Quality Indicators, specifically designed for clinical laboratories. In the first phase of the project, specific QIs for key processes of the TTP were identified, including all the pre-, intra- and post-analytic steps. The overall aim of the project is to create a common reporting system for clinical laboratories based on standardized data collection, and to define state-of-the-art and Quality Specifications (QSs) for each QI independent of: a) the size of organization and type of activities; b) the complexity of processes undertaken; and c) different degree of knowledge and ability of the staff. The aim of the present paper is to report the results collected from participating laboratories from February 2008 to December 2009 and to identify preliminary QSs. The results demonstrate that a Model of Quality Indicators managed as an External Quality Assurance Program can serve as a tool to monitor and control the pre-, intra- and post-analytical activities. It might also allow clinical laboratories to identify risks that lead to errors resulting in patient harm: identification and design of practices that eliminate medical errors; the sharing of information and education of clinical and laboratory teams on practices that reduce or prevent errors; the monitoring and evaluation of improvement activities.

SU-G-BRB-05: Automation of the Photon Dosimetric Quality Assurance Program of a Linear Accelerator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lebron, S; Lu, B; Yan, G

Purpose: To develop an automated method to calculate a linear accelerator (LINAC) photon radiation field size, flatness, symmetry, output and beam quality in a single delivery for flattened (FF) and flattening-filter-free (FFF) beams using an ionization chamber array. Methods: The proposed method consists of three control points that deliver 30×30, 10×10 and 5×5cm{sup 2} fields (FF or FFF) in a step-and-shoot sequence where the number of monitor units is weighted for each field size. The IC Profiler (Sun Nuclear Inc.) with 5mm detector spacing was used for this study. The corrected counts (CCs) were calculated and the locations of themore » maxima and minima values of the first-order gradient determined data of each sub field. Then, all CCs for each field size are summed in order to obtain the final profiles. For each profile, the radiation field size, symmetry, flatness, output factor and beam quality were calculated. For field size calculation, a parameterized gradient method was used. For method validation, profiles were collected in the detector array both, individually and as part of the step-and-shoot plan, with 9.9cm buildup for FF and FFF beams at 90cm source-to-surface distance. The same data were collected with the device (plus buildup) placed on a movable platform to achieve a 1mm resolution. Results: The differences between the dosimetric quantities calculated from both deliveries, individually and step-and-shoot, were within 0.31±0.20% and 0.04±0.02mm. The differences between the calculated field sizes with 5mm and 1mm resolution were ±0.1mm. Conclusion: The proposed single delivery method proved to be simple and efficient in automating the photon dosimetric monthly and annual quality assurance.« less

[Process optimisation in hospitals: from process to business organisation].

PubMed

Eberlein-Gonska, Maria

2010-01-01

Apart from a multidimensional quality definition and the understanding of quality as a company-wide challenge, a third essential element of quality management is prevention. Thus, company quality policy has to be prevention-oriented and requires both customer and process orientation as important prerequisites. Process orientation especially focuses on the critical analyses of work flows as a condition for identifying early intervention options which, in turn, may influence the result. Developing a business organisation requires the definition of criteria for space planning, room assignment and room integration in consideration of both medical and economic aspects and the architectural concept. Specific experiences will be demonstrated as a case study using the example of a new building in the midst of the Carl Gustav Carus University Hospital in Dresden, the Diagnostic Centre for Internal Medicine and Neurology. The hospital management placed an order to develop a sustainable as well as feasible business organisation for all the different departments. The idea was to create a medical centre where maximum use was made of all planned spaces and resources on the basis of target processes which had to be defined and agreed upon with all the persons concerned. In a next step all the personal, space and operational resources required were assigned. The success of management in all industries, including the health care sector, crucially depends on the translation of ideas into practice, among them the critical factor of sustainability. In this context, the support by the management as a role model, a formal frame for the respective project group and the definition of controlling via defined indicators have special importance. The example of the Diagnostic Centre for Internal Medicine and Neurology demonstrates that the result of changed processes may release a cultural change where competition can be replaced by cooperation step by step. Copyright © 2010. Published by Elsevier GmbH.

AESOPS: a randomised controlled trial of the clinical effectiveness and cost-effectiveness of opportunistic screening and stepped care interventions for older hazardous alcohol users in primary care.

PubMed

Watson, J M; Crosby, H; Dale, V M; Tober, G; Wu, Q; Lang, J; McGovern, R; Newbury-Birch, D; Parrott, S; Bland, J M; Drummond, C; Godfrey, C; Kaner, E; Coulton, S

2013-06-01

There is clear evidence of the detrimental impact of hazardous alcohol consumption on the physical and mental health of the population. Estimates suggest that hazardous alcohol consumption annually accounts for 150,000 hospital admissions and between 15,000 and 22,000 deaths in the UK. In the older population, hazardous alcohol consumption is associated with a wide range of physical, psychological and social problems. There is evidence of an association between increased alcohol consumption and increased risk of coronary heart disease, hypertension and haemorrhagic and ischaemic stroke, increased rates of alcohol-related liver disease and increased risk of a range of cancers. Alcohol is identified as one of the three main risk factors for falls. Excessive alcohol consumption in older age can also contribute to the onset of dementia and other age-related cognitive deficits and is implicated in one-third of all suicides in the older population. To compare the clinical effectiveness and cost-effectiveness of a stepped care intervention against a minimal intervention in the treatment of older hazardous alcohol users in primary care. A multicentre, pragmatic, two-armed randomised controlled trial with an economic evaluation. General practices in primary care in England and Scotland between April 2008 and October 2010. Adults aged ≥ 55 years scoring ≥ 8 on the Alcohol Use Disorders Identification Test (10-item) (AUDIT) were eligible. In total, 529 patients were randomised in the study. The minimal intervention group received a 5-minute brief advice intervention with the practice or research nurse involving feedback of the screening results and discussion regarding the health consequences of continued hazardous alcohol consumption. Those in the stepped care arm initially received a 20-minute session of behavioural change counselling, with referral to step 2 (motivational enhancement therapy) and step 3 (local specialist alcohol services) if indicated. Sessions were recorded and rated to ensure treatment fidelity. The primary outcome was average drinks per day (ADD) derived from extended AUDIT--Consumption (3-item) (AUDIT-C) at 12 months. Secondary outcomes were AUDIT-C score at 6 and 12 months; alcohol-related problems assessed using the Drinking Problems Index (DPI) at 6 and 12 months; health-related quality of life assessed using the Short Form Questionnaire-12 items (SF-12) at 6 and 12 months; ADD at 6 months; quality-adjusted life-years (QALYs) (for cost-utility analysis derived from European Quality of Life-5 Dimensions); and health and social care resource use associated with the two groups. Both groups reduced alcohol consumption between baseline and 12 months. The difference between groups in log-transformed ADD at 12 months was very small, at 0.025 [95% confidence interval (CI)--0.060 to 0.119], and not statistically significant. At month 6 the stepped care group had a lower ADD, but again the difference was not statistically significant. At months 6 and 12, the stepped care group had a lower DPI score, but this difference was not statistically significant at the 5% level. The stepped care group had a lower SF-12 mental component score and lower physical component score at month 6 and month 12, but these differences were not statistically significant at the 5% level. The overall average cost per patient, taking into account health and social care resource use, was £488 [standard deviation (SD) £826] in the stepped care group and £482 (SD £826) in the minimal intervention group at month 6. The mean QALY gains were slightly greater in the stepped care group than in the minimal intervention group, with a mean difference of 0.0058 (95% CI -0.0018 to 0.0133), generating an incremental cost-effectiveness ratio (ICER) of £1100 per QALY gained. At month 12, participants in the stepped care group incurred fewer costs, with a mean difference of -£194 (95% CI -£585 to £198), and had gained 0.0117 more QALYs (95% CI -0.0084 to 0.0318) than the control group. Therefore, from an economic perspective the minimal intervention was dominated by stepped care but, as would be expected given the effectiveness results, the difference was small and not statistically significant. Stepped care does not confer an advantage over minimal intervention in terms of reduction in alcohol consumption at 12 months post intervention when compared with a 5-minute brief (minimal) intervention. This trial is registered as ISRCTN52557360. This project was funded by the NIHR Health Technology Assessment programme and will be published in full in Health Technology Assessment; Vol. 17, No. 25. See the HTA programme website for further project information.

A system identification approach for developing model predictive controllers of antibody quality attributes in cell culture processes.

PubMed

Downey, Brandon; Schmitt, John; Beller, Justin; Russell, Brian; Quach, Anthony; Hermann, Elizabeth; Lyon, David; Breit, Jeffrey

2017-11-01

As the biopharmaceutical industry evolves to include more diverse protein formats and processes, more robust control of Critical Quality Attributes (CQAs) is needed to maintain processing flexibility without compromising quality. Active control of CQAs has been demonstrated using model predictive control techniques, which allow development of processes which are robust against disturbances associated with raw material variability and other potentially flexible operating conditions. Wide adoption of model predictive control in biopharmaceutical cell culture processes has been hampered, however, in part due to the large amount of data and expertise required to make a predictive model of controlled CQAs, a requirement for model predictive control. Here we developed a highly automated, perfusion apparatus to systematically and efficiently generate predictive models using application of system identification approaches. We successfully created a predictive model of %galactosylation using data obtained by manipulating galactose concentration in the perfusion apparatus in serialized step change experiments. We then demonstrated the use of the model in a model predictive controller in a simulated control scenario to successfully achieve a %galactosylation set point in a simulated fed-batch culture. The automated model identification approach demonstrated here can potentially be generalized to many CQAs, and could be a more efficient, faster, and highly automated alternative to batch experiments for developing predictive models in cell culture processes, and allow the wider adoption of model predictive control in biopharmaceutical processes. © 2017 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers Biotechnol. Prog., 33:1647-1661, 2017. © 2017 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers.

Evaluation of Various Radar Data Quality Control Algorithms Based on Accumulated Radar Rainfall Statistics

NASA Technical Reports Server (NTRS)

Robinson, Michael; Steiner, Matthias; Wolff, David B.; Ferrier, Brad S.; Kessinger, Cathy; Einaudi, Franco (Technical Monitor)

2000-01-01

The primary function of the TRMM Ground Validation (GV) Program is to create GV rainfall products that provide basic validation of satellite-derived precipitation measurements for select primary sites. A fundamental and extremely important step in creating high-quality GV products is radar data quality control. Quality control (QC) processing of TRMM GV radar data is based on some automated procedures, but the current QC algorithm is not fully operational and requires significant human interaction to assure satisfactory results. Moreover, the TRMM GV QC algorithm, even with continuous manual tuning, still can not completely remove all types of spurious echoes. In an attempt to improve the current operational radar data QC procedures of the TRMM GV effort, an intercomparison of several QC algorithms has been conducted. This presentation will demonstrate how various radar data QC algorithms affect accumulated radar rainfall products. In all, six different QC algorithms will be applied to two months of WSR-88D radar data from Melbourne, Florida. Daily, five-day, and monthly accumulated radar rainfall maps will be produced for each quality-controlled data set. The QC algorithms will be evaluated and compared based on their ability to remove spurious echoes without removing significant precipitation. Strengths and weaknesses of each algorithm will be assessed based on, their abilit to mitigate both erroneous additions and reductions in rainfall accumulation from spurious echo contamination and true precipitation removal, respectively. Contamination from individual spurious echo categories will be quantified to further diagnose the abilities of each radar QC algorithm. Finally, a cost-benefit analysis will be conducted to determine if a more automated QC algorithm is a viable alternative to the current, labor-intensive QC algorithm employed by TRMM GV.

A Lean Six Sigma approach to the improvement of the selenium analysis method.

PubMed

Cloete, Bronwyn C; Bester, André

2012-11-02

Reliable results represent the pinnacle assessment of quality of an analytical laboratory, and therefore variability is considered to be a critical quality problem associated with the selenium analysis method executed at Western Cape Provincial Veterinary Laboratory (WCPVL). The elimination and control of variability is undoubtedly of significant importance because of the narrow margin of safety between toxic and deficient doses of the trace element for good animal health. A quality methodology known as Lean Six Sigma was believed to present the most feasible solution for overcoming the adverse effect of variation, through steps towards analytical process improvement. Lean Six Sigma represents a form of scientific method type, which is empirical, inductive and deductive, and systematic, which relies on data, and is fact-based. The Lean Six Sigma methodology comprises five macro-phases, namely Define, Measure, Analyse, Improve and Control (DMAIC). Both qualitative and quantitative laboratory data were collected in terms of these phases. Qualitative data were collected by using quality-tools, namely an Ishikawa diagram, a Pareto chart, Kaizen analysis and a Failure Mode Effect analysis tool. Quantitative laboratory data, based on the analytical chemistry test method, were collected through a controlled experiment. The controlled experiment entailed 13 replicated runs of the selenium test method, whereby 11 samples were repetitively analysed, whilst Certified Reference Material (CRM) was also included in 6 of the runs. Laboratory results obtained from the controlled experiment was analysed by using statistical methods, commonly associated with quality validation of chemistry procedures. Analysis of both sets of data yielded an improved selenium analysis method, believed to provide greater reliability of results, in addition to a greatly reduced cycle time and superior control features. Lean Six Sigma may therefore be regarded as a valuable tool in any laboratory, and represents both a management discipline, and a standardised approach to problem solving and process optimisation.

Control of PbI2 nucleation and crystallization: towards efficient perovskite solar cells based on vapor-assisted solution process

NASA Astrophysics Data System (ADS)

Yang, Chongqiu; Peng, Yanke; Simon, Terrence; Cui, Tianhong

2018-04-01

Perovskite solar cells (PSC) have outstanding potential to be low-cost, high-efficiency photovoltaic devices. The PSC can be fabricated by numerous techniques; however, the power conversion efficiency (PCE) for the two-step-processed PSC falls behind that of the one-step method. In this work, we investigate the effects of relative humidity (RH) and dry air flow on the lead iodide (PbI2) solution deposition process. We conclude that the quality of the PbI2 film is critical to the development of the perovskite film and the performance of the PSC device. Low RH and dry air flow used during the PbI2 spin coating procedure can increase supersaturation concentration to form denser PbI2 nuclei and a more suitable PbI2 film. Moreover, airflow-assisted PbI2 drying and thermal annealing steps can smooth transformation from the nucleation stage to the crystallization stage.

The Ocean Observatories Initiative: Data pre-Processing: Diagnostic Tools to Prepare Data for QA/QC Processing.

NASA Astrophysics Data System (ADS)

Belabbassi, L.; Garzio, L. M.; Smith, M. J.; Knuth, F.; Vardaro, M.; Kerfoot, J.

2016-02-01

The Ocean Observatories Initiative (OOI), funded by the National Science Foundation, provides users with access to long-term datasets from a variety of deployed oceanographic sensors. The Pioneer Array in the Atlantic Ocean off the Coast of New England hosts 10 moorings and 6 gliders. Each mooring is outfitted with 6 to 19 different instruments telemetering more than 1000 data streams. These data are available to science users to collaborate on common scientific goals such as water quality monitoring and scale variability measures of continental shelf processes and coastal open ocean exchanges. To serve this purpose, the acquired datasets undergo an iterative multi-step quality assurance and quality control procedure automated to work with all types of data. Data processing involves several stages, including a fundamental pre-processing step when the data are prepared for processing. This takes a considerable amount of processing time and is often not given enough thought in development initiatives. The volume and complexity of OOI data necessitates the development of a systematic diagnostic tool to enable the management of a comprehensive data information system for the OOI arrays. We present two examples to demonstrate the current OOI pre-processing diagnostic tool. First, Data Filtering is used to identify incomplete, incorrect, or irrelevant parts of the data and then replaces, modifies or deletes the coarse data. This provides data consistency with similar datasets in the system. Second, Data Normalization occurs when the database is organized in fields and tables to minimize redundancy and dependency. At the end of this step, the data are stored in one place to reduce the risk of data inconsistency and promote easy and efficient mapping to the database.

Step training improves reaction time, gait and balance and reduces falls in older people: a systematic review and meta-analysis.

PubMed

Okubo, Yoshiro; Schoene, Daniel; Lord, Stephen R

2017-04-01

To examine the effects of stepping interventions on fall risk factors and fall incidence in older people. Electronic databases (PubMed, EMBASE, CINAHL, Cochrane, CENTRAL) and reference lists of included articles from inception to March 2015. Randomised (RCT) or clinical controlled trials (CCT) of volitional and reactive stepping interventions that included older (minimum age 60) people providing data on falls or fall risk factors. Meta-analyses of seven RCTs (n=660) showed that the stepping interventions significantly reduced the rate of falls (rate ratio=0.48, 95% CI 0.36 to 0.65, p<0.0001, I 2 =0%) and the proportion of fallers (risk ratio=0.51, 95% CI 0.38 to 0.68, p<0.0001, I 2 =0%). Subgroup analyses stratified by reactive and volitional stepping interventions revealed a similar efficacy for rate of falls and proportion of fallers. A meta-analysis of two RCTs (n=62) showed that stepping interventions significantly reduced laboratory-induced falls, and meta-analysis findings of up to five RCTs and CCTs (n=36-416) revealed that stepping interventions significantly improved simple and choice stepping reaction time, single leg stance, timed up and go performance (p<0.05), but not measures of strength. The findings indicate that both reactive and volitional stepping interventions reduce falls among older adults by approximately 50%. This clinically significant reduction may be due to improvements in reaction time, gait, balance and balance recovery but not in strength. Further high-quality studies aimed at maximising the effectiveness and feasibility of stepping interventions are required. CRD42015017357. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

A Guide for Designing and Analyzing RNA-Seq Data.

PubMed

Chatterjee, Aniruddha; Ahn, Antonio; Rodger, Euan J; Stockwell, Peter A; Eccles, Michael R

2018-01-01

The identity of a cell or an organism is at least in part defined by its gene expression and therefore analyzing gene expression remains one of the most frequently performed experimental techniques in molecular biology. The development of the RNA-Sequencing (RNA-Seq) method allows an unprecedented opportunity to analyze expression of protein-coding, noncoding RNA and also de novo transcript assembly of a new species or organism. However, the planning and design of RNA-Seq experiments has important implications for addressing the desired biological question and maximizing the value of the data obtained. In addition, RNA-Seq generates a huge volume of data and accurate analysis of this data involves several different steps and choices of tools. This can be challenging and overwhelming, especially for bench scientists. In this chapter, we describe an entire workflow for performing RNA-Seq experiments. We describe critical aspects of wet lab experiments such as RNA isolation, library preparation and the initial design of an experiment. Further, we provide a step-by-step description of the bioinformatics workflow for different steps involved in RNA-Seq data analysis. This includes power calculations, setting up a computational environment, acquisition and processing of publicly available data if desired, quality control measures, preprocessing steps for the raw data, differential expression analysis, and data visualization. We particularly mention important considerations for each step to provide a guide for designing and analyzing RNA-Seq data.

Structured education programme for women with polycystic ovary syndrome: a randomised controlled trial.

PubMed

Mani, Hamidreza; Chudasama, Yogini; Hadjiconstantinou, Michelle; Bodicoat, Danielle H; Edwardson, Charlotte; Levy, Miles J; Gray, Laura J; Barnett, Janette; Daly, Heather; Howlett, Trevor A; Khunti, Kamlesh; Davies, Melanie J

2018-01-01

To evaluate the effectiveness of a structured education programmes in women with polycystic ovary syndrome (PCOS). Single-centre, randomised controlled trial, testing a single exposure to a group-based, face-to-face, structured education programme. Inclusion criteria were women with PCOS, aged 18-49 years inclusive and body mass index ≥23 kg/m 2 for black and minority ethnicities or ≥25 kg/m 2 for white Europeans. Primary outcome was step-count/day at 12 months. Secondary outcomes included indices of physical activity, cardiovascular risk factors, quality of life (QoL) and illness perception (IP). 161 women were included (78 control, 83 intervention); 69% white; mean age 33.4 (s.d. 7.6) years, of whom 100 (48 intervention; 52 control) attended their 12-month visit (38% attrition). 77% of the intervention arm attended the education programme. No significant change in step-count was observed at 12 months (mean difference: +351 steps/day (95% confidence interval -481, +1183); P  = 0.40). No differences were found in biochemical or anthropometric outcomes. The education programme improved participants' IP in 2 dimensions: understanding their PCOS ( P  < 0.001) and sense of control ( P  < 0.01) and improved QoL in 3 dimensions: emotions ( P  < 0.05), fertility ( P  < 0.05), weight ( P  < 0.01) and general mental well-being ( P  < 0.01). A single exposure to structured education programme did not increase physical activity or improve biochemical markers in overweight and obese women with PCOS. However, providing a structured education in parallel to routine medical treatment can be beneficial for participants' understanding of their condition, reducing their anxiety and improving their QoL. © 2018 The authors.

Making healthy eating policy practice: A group randomized controlled trial on changes in snack quality, costs, and consumption in after school programs

PubMed Central

Beets, Michael W.; Weaver, R. Glenn; Turner-McGrievy, Gabrielle; Huberty, Jennifer; Ward, Dianne S.; Freedman, Darcy; Hutto, Brent; Moore, Justin B.; Beighle, Aaron

2017-01-01

Purpose The aim of this study was to evaluate an intervention designed to assist after school programs (ASPs) in meeting snack nutrition policies that specify that a fruit or vegetable (FV) be served daily, and sugar-sweetened beverages/foods and artificially flavored foods eliminated. Design One-year group randomized controlled trial Setting Afterschool programs operating in South Carolina, US. Subjects Twenty ASPs serving over 1,700 children were recruited, match-paired post-baseline on enrollment size and days FV were served/week (days/wk), and randomized to either an intervention (n=10) or control (n=10) groups. Intervention Strategies To Enhance Practice for Healthy Eating (STEPs-HE), a multi-step adaptive intervention framework, which assists ASP leaders and staff to serve snacks that meet nutrition policies while maintaining cost. Measures Direct observation of snacks served and consumed, and monthly snack expenditures via receipts. Analysis Nonparametric and mixed-model repeated-measures Results By post-assessment, intervention ASPs increased serving FV to 3.9±2.1 vs. 0.7±1.7days/wk and decreased serving sugar-sweetened beverages to 0.1±0.7 vs. 1.8±2.4days/wk and foods to 0.3±1.1 vs. 2.7±2.5days/wk compared to controls, respectively. Cost of snacks increased by $0.02/snack in the intervention ASPs ($0.36 to $0.38) compared to a $0.01/snack decrease in the control ($0.39 to $0.38). Across both assessments and groups 80–100% of children consumed FV. Conclusions The STEPs-HE intervention can assist ASPs in meeting nationally endorsed nutrition policies with marginal increases in cost. PMID:26158679

True cadence and step accumulation are not equivalent: the effect of intermittent claudication on free-living cadence.

PubMed

Stansfield, B; Clarke, C; Dall, P; Godwin, J; Holdsworth, R; Granat, M

2015-02-01

'True cadence' is the rate of stepping during the period of stepping. 'Step accumulation' is the steps within an epoch of time (e.g. 1min). These terms have been used interchangeably in the literature. These outcomes are compared within a population with intermittent claudication (IC). Multiday, 24h stepping activity of those with IC (30) and controls (30) was measured objectively using the activPAL physical activity monitor. 'True cadence' and 'step accumulation' outcomes were calculated. Those with IC took fewer steps/d 6531±2712 than controls 8692±2945 (P=0.003). However, these steps were taken within approximately the same number of minute epochs (IC 301±100min/d; controls 300±70min/d, P=0.894) with only slightly lower true cadence (IC 69 (IQ 66,72) steps/min; controls 72 (IQ 68,76) steps/min, P=0.026), giving substantially lower step accumulation (IC 22 (IQ 19,24) steps/min; controls 30 (IQ 23,34) steps/min) (P<0.001). However, the true cadence of stepping within the blocks of the 1, 5, 20, 30 and 60min with the maximum number of steps accumulated was lower for those with IC than controls (P<0.05). Those with IC took 1300 steps fewer per day above a true cadence of 90 steps/min. True cadence and step accumulation outcomes were radically different for the outcomes examined. 'True cadence' and 'step accumulation' were not equivalent in those with IC or controls. The measurement of true cadence in the population of people with IC provides information about their stepping rate during the time they are stepping. True cadence should be used to correctly describe the rate of stepping as performed. Copyright © 2014 Elsevier B.V. All rights reserved.

Kinematic and behavioral analyses of protective stepping strategies and risk for falls among community living older adults.

PubMed

Bair, Woei-Nan; Prettyman, Michelle G; Beamer, Brock A; Rogers, Mark W

2016-07-01

Protective stepping evoked by externally applied lateral perturbations reveals balance deficits underlying falls. However, a lack of comprehensive information about the control of different stepping strategies in relation to the magnitude of perturbation limits understanding of balance control in relation to age and fall status. The aim of this study was to investigate different protective stepping strategies and their kinematic and behavioral control characteristics in response to different magnitudes of lateral waist-pulls between older fallers and non-fallers. Fifty-two community-dwelling older adults (16 fallers) reacted naturally to maintain balance in response to five magnitudes of lateral waist-pulls. The balance tolerance limit (BTL, waist-pull magnitude where protective steps transitioned from single to multiple steps), first step control characteristics (stepping frequency and counts, spatial-temporal kinematic, and trunk position at landing) of four naturally selected protective step types were compared between fallers and non-fallers at- and above-BTL. Fallers took medial-steps most frequently while non-fallers most often took crossover-back-steps. Only non-fallers varied their step count and first step control parameters by step type at the instants of step initiation (onset time) and termination (trunk position), while both groups modulated step execution parameters (single stance duration and step length) by step type. Group differences were generally better demonstrated above-BTL. Fallers primarily used a biomechanically less effective medial-stepping strategy that may be partially explained by reduced somato-sensation. Fallers did not modulate their step parameters by step type at first step initiation and termination, instances particularly vulnerable to instability, reflecting their limitations in balance control during protective stepping. Copyright © 2016. Published by Elsevier Ltd.

Economic-Oriented Stochastic Optimization in Advanced Process Control of Chemical Processes

PubMed Central

Dobos, László; Király, András; Abonyi, János

2012-01-01

Finding the optimal operating region of chemical processes is an inevitable step toward improving economic performance. Usually the optimal operating region is situated close to process constraints related to product quality or process safety requirements. Higher profit can be realized only by assuring a relatively low frequency of violation of these constraints. A multilevel stochastic optimization framework is proposed to determine the optimal setpoint values of control loops with respect to predetermined risk levels, uncertainties, and costs of violation of process constraints. The proposed framework is realized as direct search-type optimization of Monte-Carlo simulation of the controlled process. The concept is illustrated throughout by a well-known benchmark problem related to the control of a linear dynamical system and the model predictive control of a more complex nonlinear polymerization process. PMID:23213298

Behavior sensitivities for control augmented structures

NASA Technical Reports Server (NTRS)

Manning, R. A.; Lust, R. V.; Schmit, L. A.

1987-01-01

During the past few years it has been recognized that combining passive structural design methods with active control techniques offers the prospect of being able to find substantially improved designs. These developments have stimulated interest in augmenting structural synthesis by adding active control system design variables to those usually considered in structural optimization. An essential step in extending the approximation concepts approach to control augmented structural synthesis is the development of a behavior sensitivity analysis capability for determining rates of change of dynamic response quantities with respect to changes in structural and control system design variables. Behavior sensitivity information is also useful for man-machine interactive design as well as in the context of system identification studies. Behavior sensitivity formulations for both steady state and transient response are presented and the quality of the resulting derivative information is evaluated.

Considering dominance in reduced single-step genomic evaluations.

PubMed

Ertl, J; Edel, C; Pimentel, E C G; Emmerling, R; Götz, K-U

2018-06-01

Single-step models including dominance can be an enormous computational task and can even be prohibitive for practical application. In this study, we try to answer the question whether a reduced single-step model is able to estimate breeding values of bulls and breeding values, dominance deviations and total genetic values of cows with acceptable quality. Genetic values and phenotypes were simulated (500 repetitions) for a small Fleckvieh pedigree consisting of 371 bulls (180 thereof genotyped) and 553 cows (40 thereof genotyped). This pedigree was virtually extended for 2,407 non-genotyped daughters. Genetic values were estimated with the single-step model and with different reduced single-step models. Including more relatives of genotyped cows in the reduced single-step model resulted in a better agreement of results with the single-step model. Accuracies of genetic values were largest with single-step and smallest with reduced single-step when only the cows genotyped were modelled. The results indicate that a reduced single-step model is suitable to estimate breeding values of bulls and breeding values, dominance deviations and total genetic values of cows with acceptable quality. © 2018 Blackwell Verlag GmbH.

Cochlear Implantation in Patients With Usher Syndrome Type IIa Increases Performance and Quality of Life.

PubMed

Hartel, Bas P; van Nierop, Josephine W I; Huinck, Wendy J; Rotteveel, Liselotte J C; Mylanus, Emmanuel A M; Snik, Ad F; Kunst, Henricus P M; Pennings, Ronald J E

2017-07-01

Usher syndrome type IIa (USH2a) is characterized by congenital moderate to severe hearing impairment and retinitis pigmentosa. Hearing rehabilitation starts in early childhood with the application of hearing aids. In some patients with USH2a, severe progression of hearing impairment leads to insufficient speech intelligibility with hearing aids and issues with adequate communication and safety. Cochlear implantation (CI) is the next step in rehabilitation of such patients. This study evaluates the performance and benefit of CI in patients with USH2a. Retrospective case-control study to evaluate the performance and benefit of CI in 16 postlingually deaf adults (eight patients with USH2a and eight matched controls). Performance and benefit were evaluated by a speech intelligibility test and three quality-of-life questionnaires. Patients with USH2a with a mean age of 59 years at implantation exhibited good performance after CI. The phoneme scores improved significantly from 41 to 87% in patients with USH2a (p = 0.02) and from 30 to 86% in the control group (p = 0.001). The results of the questionnaire survey demonstrated a clear benefit from CI. There were no differences in performance or benefit between patients with USH2a and control patients before and after CI. CI increases speech intelligibility and improves quality of life in patients with USH2a.

Integrated Watershed Management to Rehabilitate the Distorded Hydrologic Cycle in a Korean Urban Region

NASA Astrophysics Data System (ADS)

Lee, K.; Chung, E.; Park, K.

2007-12-01

Many urbanized watersheds suffer from streamflow depletion and poor stream quality, which often negatively affects related factors such as in-stream and near-stream ecologic integrity and water supply. But any watershed management which does not consider all potential risks is not proper since all hydrological components are closely related. Therefore this study has developed and applied a ten-step integrated watershed management (IWM) procedure to sustainably rehabilitate distorted hydrologic cycles due to urbanization. Step 1 of this procedure is understanding the watershed component and processes. This study proposes not only water quantity/quality monitoring but also continuous water quantity/quality simulation and estimation of annual pollutant loads from unit loads of all landuses. Step 2 is quantifying the watershed problem as potential flood damage (PFD), potential streamflow depletion (PSD), potential water quality deterioration (PWQD) and watershed evaluation index (WEI). All indicators are selected from the sustainability concept, Pressure-State- Response (PSR) model. All weights are estimated by Analytic Hierarchy Process (AHP). Four indices are calculated using composite programming, a kind of multicritera decision making technque. In Step 3 residents' preference on management objectives which consists of flood damage mitigation, prevention of streamflow depletion, and water quality enhancement are quantified. WEI can be recalculated using these values. Step 4 requires one to set the specific goals and objectives based on the results from Step 2 and 3. Objectives can include spatial flood allocation, instreamflow requirement and total maximum daily load (TMDL). Step 5 and 6 are developing all possible alternatives and to eliminate the infeasible. Step 7 is analyzing the effectiveness of all remaining feasible alternatives. The criteria of water quantity are presented as changed lowflow(Q275) and drought flow(Q355) of flow duration curve and number of days to satisfy the instreamflow requirement. Also the criteria of water quality are proposed as changed average BOD concentration and total daily loads and number of days to satisfy the TMDL. Step 8 involves the calculation of AEI using various MCDM techniques. The indicators of AEI are obtained by the sustainability concept, Drivers-Pressure-State-Impact-Response (DPSIR), an improved PSR model. All previous results are used in this step. Step 9 is estimating the benefit and cost of alternatives. Discrete Willingness To Pay (WTP) for the specific improvement of some current watershed conditions are estimated by the choice experiment method which is an economic valuation with stated presence techniques. WTPs of specific alternatives are calculated by combining AEI and choice experiment results. Therefore, the benefit of alternatives can be obtained by multiplying WTP and total household value of the sub-watershed. Finally in Step 10 the final alternatives comparing the net benefit and BC ratio are determined. Final alternatives derived from the proposed IWM procedure should not be carried out immediately but be discussed by stakeholders and decision makers. However, since plans obtained from the elaborated analyses reflect even sustainability concept, these alternatives can be apt to be accepted comparatively. This ten-step procedure will be helpful in making decision support system for sustainable IWM.

Development and integration of block operations for data invariant automation of digital preprocessing and analysis of biological and biomedical Raman spectra.

PubMed

Schulze, H Georg; Turner, Robin F B

2015-06-01

High-throughput information extraction from large numbers of Raman spectra is becoming an increasingly taxing problem due to the proliferation of new applications enabled using advances in instrumentation. Fortunately, in many of these applications, the entire process can be automated, yielding reproducibly good results with significant time and cost savings. Information extraction consists of two stages, preprocessing and analysis. We focus here on the preprocessing stage, which typically involves several steps, such as calibration, background subtraction, baseline flattening, artifact removal, smoothing, and so on, before the resulting spectra can be further analyzed. Because the results of some of these steps can affect the performance of subsequent ones, attention must be given to the sequencing of steps, the compatibility of these sequences, and the propensity of each step to generate spectral distortions. We outline here important considerations to effect full automation of Raman spectral preprocessing: what is considered full automation; putative general principles to effect full automation; the proper sequencing of processing and analysis steps; conflicts and circularities arising from sequencing; and the need for, and approaches to, preprocessing quality control. These considerations are discussed and illustrated with biological and biomedical examples reflecting both successful and faulty preprocessing.

Virtual reality for rehabilitation in Parkinson's disease.

PubMed

Dockx, Kim; Bekkers, Esther Mj; Van den Bergh, Veerle; Ginis, Pieter; Rochester, Lynn; Hausdorff, Jeffrey M; Mirelman, Anat; Nieuwboer, Alice

2016-12-21

Parkinson's disease (PD) is a neurodegenerative disorder that is best managed by a combination of medication and regular physiotherapy. In this context, virtual reality (VR) technology is proposed as a new rehabilitation tool with a possible added value over traditional physiotherapy approaches. It potentially optimises motor learning in a safe environment, and by replicating real-life scenarios could help improve functional activities of daily living. The objective of this review was to summarise the current best evidence for the effectiveness of VR interventions for the rehabilitation of people with PD in comparison with 1) active interventions, and 2) passive interventions. Our primary goal was to determine the effect of VR training on gait and balance. Secondary goals included examining the effects of VR on global motor function, activities of daily living, quality of life, cognitive function, exercise adherence, and the occurrence of adverse events. We identified relevant articles through electronic searches of the Cochrane Movement Disorders Group Trials Register, the Cochrane Central Register of Controlled Trials (CENTRAL) (the Cochrane Library), MEDLINE, Embase, CINAHL, the Physiotherapy Evidence Database (PEDro), online trials registers, and by handsearching reference lists. We carried out all searches up until 26 November 2016. We searched for randomised and quasi-randomised controlled trials of VR exercise interventions in people with PD. We included only trials where motor rehabilitation was the primary goal. Two review authors independently searched for trials that corresponded to the predefined inclusion criteria. We independently extracted and assessed all data for methodological quality. A third review author was responsible for conflict resolution when required. We included 8 trials involving 263 people with PD in the review. Risk of bias was unclear or high for all but one of the included studies. Study sample sizes were small, and there was a large amount of heterogeneity between trials with regard to study design and the outcome measures used. As a result, we graded the quality of the evidence as low or very low. Most of the studies intended to improve motor function using commercially available devices, which were compared with physiotherapy. The interventions lasted for between 4 and 12 weeks.In comparison to physiotherapy, VR may lead to a moderate improvement in step and stride length (standardised mean difference (SMD) 0.69, 95% confidence interval (CI) 0.30 to 1.08; 3 studies; 106 participants; low-quality evidence). VR and physiotherapy interventions may have similar effects on gait (SMD 0.20, 95% CI -0.14 to 0.55; 4 studies; 129 participants; low-quality evidence), balance (SMD 0.34, 95% CI -0.04 to 0.71; 5 studies; 155 participants; low-quality evidence), and quality of life (mean difference 3.73 units, 95% CI -2.16 to 9.61; 4 studies; 106 participants). VR interventions did not lead to any reported adverse events, and exercise adherence did not differ between VR and other intervention arms.The evidence available comparing VR exercise with a passive control was more limited. The evidence for the main outcomes of interest was of very low quality due to the very small sample sizes of the two studies available for this comparison. We found low-quality evidence of a positive effect of short-term VR exercise on step and stride length. VR and physiotherapy may have similar effects on gait, balance, and quality of life. The evidence available comparing VR with passive control interventions was more limited. Additional high-quality, large-scale studies are needed to confirm these findings.

Quality management: reduction of waiting time and efficiency enhancement in an ENT-university outpatients' department

PubMed Central

Helbig, Matthias; Helbig, Silke; Kahla-Witzsch, Heike A; May, Angelika

2009-01-01

Background Public health systems are confronted with constantly rising costs. Furthermore, diagnostic as well as treatment services become more and more specialized. These are the reasons for an interdisciplinary project on the one hand aiming at simplification of planning and scheduling patient appointments, on the other hand at fulfilling all requirements of efficiency and treatment quality. Methods As to understanding procedure and problem solving activities, the responsible project group strictly proceeded with four methodical steps: actual state analysis, analysis of causes, correcting measures, and examination of effectiveness. Various methods of quality management, as for instance opinion polls, data collections, and several procedures of problem identification as well as of solution proposals were applied. All activities were realized according to the requirements of the clinic's ISO 9001:2000 certified quality management system. The development of this project is described step by step from planning phase to inauguration into the daily routine of the clinic and subsequent control of effectiveness. Results Five significant problem fields could be identified. After an analysis of causes the major remedial measures were: installation of a patient telephone hotline, standardization of appointment arrangements for all patients, modification of the appointments book considering the reason for coming in planning defined working periods for certain symptoms and treatments, improvement of telephonic counselling, and transition to flexible time planning by daily updates of the appointments book. After implementation of these changes into the clinic's routine success could be demonstrated by significantly reduced waiting times and resulting increased patient satisfaction. Conclusion Systematic scrutiny of the existing organizational structures of the outpatients' department of our clinic by means of actual state analysis and analysis of causes revealed the necessity of improvement. According to rules of quality management correcting measures and subsequent examination of effectiveness were performed. These changes resulted in higher satisfaction of patients, referring colleagues and clinic staff the like. Additionally the clinic is able to cope with an increasing demand for appointments in outpatients' departments, and the clinic's human resources are employed more effectively. PMID:19183496

Lyophilization process design space.

PubMed

Patel, Sajal Manubhai; Pikal, Michael J

2013-11-01

The application of key elements of quality by design (QbD), such as risk assessment, process analytical technology, and design space, is discussed widely as it relates to freeze-drying process design and development. However, this commentary focuses on constructing the Design and Control Space, particularly for the primary drying step of the freeze-drying process. Also, practical applications and considerations of claiming a process Design Space under the QbD paradigm have been discussed. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

[Quality assurance of a virtual simulation software: application to IMAgo and SIMAgo (ISOgray)].

PubMed

Isambert, A; Beaudré, A; Ferreira, I; Lefkopoulos, D

2007-06-01

Virtual simulation process is often used to prepare three dimensional conformal radiation therapy treatments. As the quality of the treatment is widely dependent on this step, it is mandatory to perform extensive controls on this software before clinical use. The tests presented in this work have been carried out on the treatment planning system ISOgray (DOSIsoft), including the delineation module IMAgo and the virtual simulation module SIMAgo. According to our experience, the most relevant controls of international protocols have been selected. These tests mainly focused on measuring and delineation tools, virtual simulation functionalities, and have been performed with three phantoms: the Quasar Multi-Purpose Body Phantom, the Quasar MLC Beam Geometry Phantom (Modus Medical Devices Inc.) and a phantom developed at Hospital Tenon. No major issues have been identified while performing the tests. These controls have emphasized the necessity for the user to consider with a critical eye the results displayed by a virtual simulation software. The contrast of visualisation, the slice thickness, the calculation and display mode of 3D structures used by the software are many factors of uncertainties. A virtual simulation software quality assurance procedure has been written and applied on a set of CT images. Similar tests have to be performed periodically and at minimum at each change of major version.

Enhancing the quality of case studies in health services research.

PubMed Central

Yin, R K

1999-01-01

OBJECTIVE: To provide guidance on improving the quality of case studies in health services research. DATA SOURCES: Secondary data, drawing from previous case study research. RESEARCH DESIGN: Guidance is provided to two audiences: potential case study investigators (eight items) and reviewers of case study proposals (four additional items). PRINCIPAL FINDINGS: The guidance demonstrates that many operational steps can be undertaken to improve the quality of case studies. These steps have been a hallmark of high-quality case studies in related fields but have not necessarily been practiced in health services research. CONCLUSIONS: Given higher-quality case studies, the case study method can become a valuable tool for health services research. Images Figure 3 PMID:10591280

The economic effect of Planet Health on preventing bulimia nervosa.

PubMed

Wang, Li Yan; Nichols, Lauren P; Austin, S Bryn

2011-08-01

To assess the economic effect of the school-based obesity prevention program Planet Health on preventing disordered weight control behaviors and to determine the cost-effectiveness of the intervention in terms of its combined effect on prevention of obesity and disordered weight control behaviors. On the basis of the intervention's short-term effect on disordered weight control behaviors prevention, we projected the number of girls who were prevented from developing bulimia nervosa by age 17 years. We further estimated medical costs saved and quality-adjusted life years gained by the intervention over 10 years. As a final step, we compared the intervention costs with the combined intervention benefits from both obesity prevention (reported previously) and prevention of disordered weight control behaviors to determine the overall cost-effectiveness of the intervention. Middle schools. A sample of 254 intervention girls aged 10 to 14 years. The Planet Health program was implemented during the school years from 1995 to 1997 and was designed to promote healthful nutrition and physical activity among youth. Intervention costs, medical costs saved, quality-adjusted life years gained, and cost-effectiveness ratio. An estimated 1 case of bulimia nervosa would have been prevented. As a result, an estimated $33 999 in medical costs and 0.7 quality-adjusted life years would be saved. At an intervention cost of $46 803, the combined prevention of obesity and disordered weight control behaviors would yield a net savings of $14 238 and a gain of 4.8 quality-adjusted life years. Primary prevention programs, such as Planet Health, warrant careful consideration by policy makers and program planners. The findings of this study provide additional argument for integrated prevention of obesity and eating disorders.

Pain affecting procedures in non-resectable pancreatic carcinoma.

PubMed

Plachkov, I; Chernopolski, P; Bozhkov, V; Madjov, R

2013-01-01

Pancreatic cancer is third most common cancer of the gastrointestinal tract in Bulgaria, accouting for 11, 6% in 2008. The leading symptom in patients with pancreatic cancer is the pain. The pain can be related with neoplasms and their metastasis. We should use all kind of resourses for pain relief: conventional drugs (according to the three steps strategy of WHO), interventional or surgical procedures. To present the interventional and surgical techniques in our practice and to share our experience for pain control in patients with nonresectable pancreatic cancer to improve their quality of life. In a seven year period (2004-2011) we performed 59 thoracoscopic splanhnicectomies/30--bilateral/ 4 intraoperative resections of celiac ganglion, 25 CT--control celiac plexus neurolysis and 90 cases pain relief with epidural analgesia. Concerning the quality of life we applied a questionnaire of a spannish medical center " City of Hope" adapted for patients with cancer and the level of pain with visual analogue scale VAS. The long-term duration of the pain relief technique depends on applied technic, of cancer invasion and of the technic itself. The technique with the longest effect are the intraoperative celiac ganglion removal and the bilateral thoracoscopic splanhnicectomy. On the other hand the shortest effect we report the celiac plexus neurolysis, and the epudural analgesia. These data are in correlation with the reduction of the pain shown using VAS thus improving the quality of life. The surgical and interventional methods for control of cancer pain have their own collocation improving the quality of life of these patients. New strategies for the pain control are need in the future.

Interjoint coordination in lower limbs in patients with a rupture of the anterior cruciate ligament of the knee joint.

PubMed

St-Onge, N; Duval, N; Yahia, L'H; Feldman, A G

2004-05-01

Previous studies of movement kinematics in patients with a ruptured anterior cruciate ligament (ACL) have focused on changes in angular displacement in a single joint, usually flexion/extension of the knee. In the present study, we investigated the effect of an ACL injury on the overall limb interjoint coordination. We asked healthy and chronic ACL-deficient male subjects to perform eight types of movements: forward squats, backward squats, sideways squats, squats on one leg, going up a step, going down a step, walking three steps, and stepping in place. Depending on the movement concerned, we applied principal component (PC) analysis to 3 or 4 degrees of freedom (DFs): thigh flexion/extension, knee flexion/extension, ankle flexion/extension, thigh abduction/adduction. The first three DFs were investigated in all movements. PC analysis identifies linear combinations of DFs. Movements with a fixed ratio between DFs are thus described by only one PC or synergy. PCs were computed for the entire movement as well as for the period of time when the foot was in contact with the ground. For both the control and the injured groups, two synergies (PC vectors) usually accounted for more than 95% of the DFs' angular excursions. It was possible to describe 95-99% of some movements using only one synergy. Compared to control subjects, injured subjects employed different synergies for going up a step, walking three steps, squatting sideways, and squatting forward, both in the injured and uninjured legs. Those movements may thus be more indicative of injury than other movements. Although ACL-deficiency did not increase asymmetry (angle between the PCs of the same movement performed on the right and the left sides), this result is not conclusive because of the comparatively low number of subjects who participated in the study. However, the finding that synergies in both legs of patients were different from those in control subjects for going up a step and walking three steps suggests that interjoint coordination was affected for both legs, so that the asymmetry index might have been preserved despite the injury. There was also a relationship between the asymmetry index for squatting on one leg, squatting forward, walking three steps and some of the outcomes of the knee injury and osteoarthritis outcome score (pain, symptoms, activities of daily living, sport and recreation function, and knee-related quality of life). This suggests that significant differences in the asymmetry index could be obtained if more severely-injured patients participated in this study. It is possible that subjects compensated for their mechanical deficiencies by modifying muscle activation patterns. Synergies were not only modified in injured subjects, but also rearranged: the percentage of movement explained by the first PC was different for the injured and/or uninjured legs of patients, as compared to the legs of the control group, for going up a step, going down a step, walking three steps, and squatting forward. We concluded that the analysis of interjoint coordination may be efficient in characterizing motor deficits in people with knee injuries.

Improvement of the grid-connect current quality using novel proportional-integral controller for photovoltaic inverters.

PubMed

Cheng, Yuhua; Chen, Kai; Bai, Libing; Yang, Jing

2014-02-01

Precise control of the grid-connected current is a challenge in photovoltaic inverter research. Traditional Proportional-Integral (PI) control technology cannot eliminate steady-state error when tracking the sinusoidal signal from the grid, which results in a very high total harmonic distortion in the grid-connected current. A novel PI controller has been developed in this paper, in which the sinusoidal wave is discretized into an N-step input signal that is decided by the control frequency to eliminate the steady state error of the system. The effect of periodical error caused by the dead zone of the power switch and conduction voltage drop can be avoided; the current tracking accuracy and current harmonic content can also be improved. Based on the proposed PI controller, a 700 W photovoltaic grid-connected inverter is developed and validated. The improvement has been demonstrated through experimental results.

Effects of rainfall events on the occurrence and detection efficiency of viruses in river water impacted by combined sewer overflows.

PubMed

Hata, Akihiko; Katayama, Hiroyuki; Kojima, Keisuke; Sano, Shoichi; Kasuga, Ikuro; Kitajima, Masaaki; Furumai, Hiroaki

2014-01-15

Rainfall events can introduce large amount of microbial contaminants including human enteric viruses into surface water by intermittent discharges from combined sewer overflows (CSOs). The present study aimed to investigate the effect of rainfall events on viral loads in surface waters impacted by CSO and the reliability of molecular methods for detection of enteric viruses. The reliability of virus detection in the samples was assessed by using process controls for virus concentration, nucleic acid extraction and reverse transcription (RT)-quantitative PCR (qPCR) steps, which allowed accurate estimation of virus detection efficiencies. Recovery efficiencies of poliovirus in river water samples collected during rainfall events (<10%) were lower than those during dry weather conditions (>10%). The log10-transformed virus concentration efficiency was negatively correlated with suspended solid concentration (r(2)=0.86) that increased significantly during rainfall events. Efficiencies of DNA extraction and qPCR steps determined with adenovirus type 5 and a primer sharing control, respectively, were lower in dry weather. However, no clear relationship was observed between organic water quality parameters and efficiencies of these two steps. Observed concentrations of indigenous enteric adenoviruses, GII-noroviruses, enteroviruses, and Aichi viruses increased during rainfall events even though the virus concentration efficiency was presumed to be lower than in dry weather. The present study highlights the importance of using appropriate process controls to evaluate accurately the concentration of water borne enteric viruses in natural waters impacted by wastewater discharge, stormwater, and CSOs. © 2013.

Effectiveness of the HuCare Quality Improvement Strategy on health-related quality of life in patients with cancer: study protocol of a stepped-wedge cluster randomised controlled trial (HuCare2 study)

PubMed Central

Caminiti, Caterina; Iezzi, Elisa; Passalacqua, Rodolfo

2017-01-01

Introduction Our group previously demonstrated the feasibility of the HuCare Quality Improvement Strategy (HQIS), aimed at integrating into practice six psychosocial interventions recommended by international guidelines. This trial will assess whether the introduction of the strategy in oncology wards improves patient’s health-related quality of life (HRQoL). Methods and analysis Multicentre, incomplete stepped-wedge cluster randomised controlled trial, conducted in three clusters of five centres each, in three equally spaced time epochs. The study also includes an initial epoch when none of the centres are exposed to the intervention, and a final epoch when all centres will have implemented the strategy. The intervention is applied at a cluster level, and assessed at an individual level with cross-sectional model. A total of 720 patients who received a cancer diagnosis in the previous 2 months and about to start medical treatment will be enrolled. The primary aim is to evaluate the effectiveness of the HQIS versus standard care in terms of improvement of at least one of two domains (emotional and social functions) of HRQoL using the EORTC QLQ-C30 (European Organisation for Research and Treatment of Cancer Quality of Life Questionnaire-Core 30 items) questionnaire, at baseline and at 3 months. This outcome was chosen because patients with cancer generally exhibit low HRQoL, particularly at certain stages of care, and because it allows to assess the strategy’s impact as perceived by patients themselves. The HQIS comprises three phases: (1) clinician training—to improve communication-relational skills and instruct on the project; (2) centre support—four on-site visits by experts of the project team, aimed to boost motivation, help with context analysis and identification of solutions; (3) implementation of Evidence-Based Medicine (EBM) recommendations at the centre. Ethics and dissemination Ethics committee review approval has been obtained from the Ethics Committee of Parma. Results will be disseminated at conferences, and in peer-reviewed and professional journals intended for policymakers and managers. Trial registration number NCT03008993; Pre-results. PMID:28988170

The OGCleaner: filtering false-positive homology clusters.

PubMed

Fujimoto, M Stanley; Suvorov, Anton; Jensen, Nicholas O; Clement, Mark J; Snell, Quinn; Bybee, Seth M

2017-01-01

Detecting homologous sequences in organisms is an essential step in protein structure and function prediction, gene annotation and phylogenetic tree construction. Heuristic methods are often employed for quality control of putative homology clusters. These heuristics, however, usually only apply to pairwise sequence comparison and do not examine clusters as a whole. We present the Orthology Group Cleaner (the OGCleaner), a tool designed for filtering putative orthology groups as homology or non-homology clusters by considering all sequences in a cluster. The OGCleaner relies on high-quality orthologous groups identified in OrthoDB to train machine learning algorithms that are able to distinguish between true-positive and false-positive homology groups. This package aims to improve the quality of phylogenetic tree construction especially in instances of lower-quality transcriptome assemblies. https://github.com/byucsl/ogcleaner CONTACT: sfujimoto@gmail.comSupplementary information: Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

pcr: an R package for quality assessment, analysis and testing of qPCR data

PubMed Central

Ahmed, Mahmoud

2018-01-01

Background Real-time quantitative PCR (qPCR) is a broadly used technique in the biomedical research. Currently, few different analysis models are used to determine the quality of data and to quantify the mRNA level across the experimental conditions. Methods We developed an R package to implement methods for quality assessment, analysis and testing qPCR data for statistical significance. Double Delta CT and standard curve models were implemented to quantify the relative expression of target genes from CT in standard qPCR control-group experiments. In addition, calculation of amplification efficiency and curves from serial dilution qPCR experiments are used to assess the quality of the data. Finally, two-group testing and linear models were used to test for significance of the difference in expression control groups and conditions of interest. Results Using two datasets from qPCR experiments, we applied different quality assessment, analysis and statistical testing in the pcr package and compared the results to the original published articles. The final relative expression values from the different models, as well as the intermediary outputs, were checked against the expected results in the original papers and were found to be accurate and reliable. Conclusion The pcr package provides an intuitive and unified interface for its main functions to allow biologist to perform all necessary steps of qPCR analysis and produce graphs in a uniform way. PMID:29576953

The Impact of Massage Therapy on Function in Pain Populations—A Systematic Review and Meta-Analysis of Randomized Controlled Trials: Part III, Surgical Pain Populations

PubMed Central

Boyd, Courtney; Crawford, Cindy; Paat, Charmagne F; Price, Ashley; Xenakis, Lea; Zhang, Weimin; Buckenmaier, Chester; Buckenmaier, Pamela; Cambron, Jerrilyn; Deery, Christopher; Schwartz, Jan; Werner, Ruth; Whitridge, Pete

2016-01-01

Abstract Objective Pain is multi-dimensional and may be better addressed through a holistic, biopsychosocial approach. Massage therapy is commonly practiced among patients seeking pain management; however, its efficacy is unclear. This systematic review and meta-analysis is the first to rigorously assess the quality of the evidence for massage therapy’s efficacy in treating pain, function-related, and health-related quality of life outcomes in surgical pain populations. Methods Key databases were searched from inception through February 2014. Eligible randomized controlled trials were assessed for methodological quality using SIGN 50 Checklist. Meta-analysis was applied at the outcome level. A professionally diverse steering committee interpreted the results to develop recommendations. Results Twelve high quality and four low quality studies were included in the review. Results indicate massage therapy is effective for treating pain [standardized mean difference (SMD) = −0.79] and anxiety (SMD = −0.57) compared to active comparators. Conclusion Based on the available evidence, weak recommendations are suggested for massage therapy, compared to active comparators for reducing pain intensity/severity and anxiety in patients undergoing surgical procedures. This review also discusses massage therapy safety, challenges within this research field, how to address identified research gaps, and next steps for future research. PMID:27165970

[Quality evaluation of the orthodontic practice for certification by ISO 9001. A procedure beneficial for medical, medico-dental or hospital service].

PubMed

Becker, G

2001-01-01

The accreditation of the ISO 9001 certification (ISO = International Standard Organization) is an external evaluation procedure carried out by independent experts, whose object is the analysis of the operational methods and practices of a medical care facility (e.g. hospital, private clinic, general practitioner's or dentist's practice) which decided to assume the concept, implementation and control of its own quality policy. The whole accreditation procedure represents the basic structure of a continuous dynamic progressiveness within a cabinet eager to offer outstanding quality. Moreover, it guarantees active and voluntary participation of every single member of the medical administration or technical team involved in the realization of this primary objective. In other words, we are talking about a very strong dynamic innovation leading to a change of views and the improvement of communication means, while simultaneously enhancing the security and quality aspects of medical care. The continuous guarantee of high quality medical care calls for precise planning and systematization of actions. First of all, these actions are defined, analyzed and listed in precise work procedures. As they are defined with the agreement of the whole team, they implicate respect and self control. This requires of course transparency of the treatment methods, whose different steps and procedures are described in detail in a logogramm set up in common.

Alpha neurofeedback training improves SSVEP-based BCI performance.

PubMed

Wan, Feng; da Cruz, Janir Nuno; Nan, Wenya; Wong, Chi Man; Vai, Mang I; Rosa, Agostinho

2016-06-01

Steady-state visual evoked potential (SSVEP)-based brain-computer interfaces (BCIs) can provide relatively easy, reliable and high speed communication. However, the performance is still not satisfactory, especially in some users who are not able to generate strong enough SSVEP signals. This work aims to strengthen a user's SSVEP by alpha down-regulating neurofeedback training (NFT) and consequently improve the performance of the user in using SSVEP-based BCIs. An experiment with two steps was designed and conducted. The first step was to investigate the relationship between the resting alpha activity and the SSVEP-based BCI performance, in order to determine the training parameter for the NFT. Then in the second step, half of the subjects with 'low' performance (i.e. BCI classification accuracy <80%) were randomly assigned to a NFT group to perform a real-time NFT, and the rest half to a non-NFT control group for comparison. The first step revealed a significant negative correlation between the BCI performance and the individual alpha band (IAB) amplitudes in the eyes-open resting condition in a total of 33 subjects. In the second step, it was found that during the IAB down-regulating NFT, on average the subjects were able to successfully decrease their IAB amplitude over training sessions. More importantly, the NFT group showed an average increase of 16.5% in the SSVEP signal SNR (signal-to-noise ratio) and an average increase of 20.3% in the BCI classification accuracy, which was significant compared to the non-NFT control group. These findings indicate that the alpha down-regulating NFT can be used to improve the SSVEP signal quality and the subjects' performance in using SSVEP-based BCIs. It could be helpful to the SSVEP related studies and would contribute to more effective SSVEP-based BCI applications.

[Internal audit in medical laboratory: what means of control for an effective audit process?].

PubMed

Garcia-Hejl, Carine; Chianéa, Denis; Dedome, Emmanuel; Sanmartin, Nancy; Bugier, Sarah; Linard, Cyril; Foissaud, Vincent; Vest, Philippe

2013-01-01

To prepare the French Accreditation Committee (COFRAC) visit for initial certification of our medical laboratory, our direction evaluated its quality management system (QMS) and all its technical activities. This evaluation was performed owing an internal audit. This audit was outsourced. Auditors had an expertise in audit, a whole knowledge of biological standards and were independent. Several nonconformities were identified at that time, including a lack of control of several steps of the internal audit process. Hence, necessary corrective actions were taken in order to meet the requirements of standards, in particular, the formalization of all stages, from the audit program, to the implementation, review and follow-up of the corrective actions taken, and also the implementation of the resources needed to carry out audits in a pre-established timing. To ensure an optimum control of each step, the main concepts of risk management were applied: process approach, root cause analysis, effects and criticality analysis (FMECA). After a critical analysis of our practices, this methodology allowed us to define our "internal audit" process, then to formalize it and to follow it up, with a whole documentary system.

Novel Cyclosilazane-Type Silicon Precursor and Two-Step Plasma for Plasma-Enhanced Atomic Layer Deposition of Silicon Nitride.

PubMed

Park, Jae-Min; Jang, Se Jin; Lee, Sang-Ick; Lee, Won-Jun

2018-03-14

We designed cyclosilazane-type silicon precursors and proposed a three-step plasma-enhanced atomic layer deposition (PEALD) process to prepare silicon nitride films with high quality and excellent step coverage. The cyclosilazane-type precursor, 1,3-di-isopropylamino-2,4-dimethylcyclosilazane (CSN-2), has a closed ring structure for good thermal stability and high reactivity. CSN-2 showed thermal stability up to 450 °C and a sufficient vapor pressure of 4 Torr at 60 °C. The energy for the chemisorption of CSN-2 on the undercoordinated silicon nitride surface as calculated by density functional theory method was -7.38 eV. The PEALD process window was between 200 and 500 °C, with a growth rate of 0.43 Å/cycle. The best film quality was obtained at 500 °C, with hydrogen impurity of ∼7 atom %, oxygen impurity less than 2 atom %, low wet etching rate, and excellent step coverage of ∼95%. At 300 °C and lower temperatures, the wet etching rate was high especially at the lower sidewall of the trench pattern. We introduced the three-step PEALD process to improve the film quality and the step coverage on the lower sidewall. The sequence of the three-step PEALD process consists of the CSN-2 feeding step, the NH 3 /N 2 plasma step, and the N 2 plasma step. The H radicals in NH 3 /N 2 plasma efficiently remove the ligands from the precursor, and the N 2 plasma after the NH 3 plasma removes the surface hydrogen atoms to activate the adsorption of the precursor. The films deposited at 300 °C using the novel precursor and the three-step PEALD process showed a significantly improved step coverage of ∼95% and an excellent wet etching resistance at the lower sidewall, which is only twice as high as that of the blanket film prepared by low-pressure chemical vapor deposition.

Evaluation of control over the microbiological contamination of carcasses in a lamb carcass dressing process operated with or without pasteurizing treatment.

PubMed

Milios, K; Mataragas, M; Pantouvakis, A; Drosinos, E H; Zoiopoulos, P E

2011-03-30

The aim of this study was to quantify the hygienic status of a lamb slaughterhouse by means of multivariate statistical analysis, to demonstrate how the microbiological data could be exploited to improve the lamb slaughter process by constructing control charts and to evaluate the potential effect of an intervention step such as steam application on the microbiological quality of lamb carcasses. Results showed that pelt removal and evisceration were hygienically uncontrolled. TVC and Enterobacteriaceae progressively increased from the stage 'after pelt removal of hind and forelegs/before final pulling' to the stage 'after evisceration/before pluck removal' thus indicating possible deposition of microorganisms during these operations. It seems that the processing stages of freshly produced carcasses were better distinguished by Enterobacteriaceae, with evisceration contributing mostly to the final Enterobacteriaceae counts. Application of steam during the lamb slaughter process reduced microbial counts without adverse effects on the organoleptic characteristics of the carcasses. Moreover, the construction of control charts showed that decontamination with steam contributed to the maintenance of an in control process compared to that before the application of steam, suggesting the potential use of steam as an intervention step during the lamb slaughter process. Copyright © 2011 Elsevier B.V. All rights reserved.

Effects of hippotherapy in multiple sclerosis: pilot study on quality of life, spasticity, gait, pelvic floor, depression and fatigue.

PubMed

Muñoz-Lasa, Susana; López de Silanes, Carlos; Atín-Arratibel, M Ángeles; Bravo-Llatas, Carmen; Pastor-Jimeno, Salvador; Máximo-Bocanegra, Nuria

2018-04-19

Hippotherapy is being used as a promising method in the physical treatment of multiple sclerosis (MS). Comparative open clinical pre-post study into hippotherapy intervention during a 6-month period in patients with MS (n=6). Not randomised and with control group (n=4). The study was performed by MHG Foundation. A statistically significant improvement was observed in the therapy group in: spasticity pre-post measured by the modified Ashworth scale (P=.01). Statistically significant improvement in fatigue impact (P<.0001) measured with FIS; in general, perception of heath outcome in urinary quality of life scale KHQ (P=.033), and in subscales 2, 3 and 4 of MSQOL-54 (P=.011). Control group showed no improvement in any scale. This study reinforces current literature that supports hippotherapy as an adequate intervention for MS patients. Further studies with more participants, control groups and blinded research would be logical steps for future research in this field. Copyright © 2018 Elsevier España, S.L.U. All rights reserved.

Characterization of PET preforms using spectral domain optical coherence tomography

NASA Astrophysics Data System (ADS)

Hosseiny, Hamid; Ferreira, Manuel João.; Martins, Teresa; Carmelo Rosa, Carla

2013-11-01

Polyethylene terephthalate (PET) preforms are massively produced nowadays with the purpose of producing food and beverages packaging and liquid containers. Some varieties of these preforms are produced as multilayer structures, where very thin inner film(s) act as a barrier for nutrients leakage. The knowledge of the thickness of this thin inner layer is important in the production line. The quality control of preforms production requires a fast approach and normally the thickness control is performed by destructive means out of the production line. A spectral domain optical coherence tomography (SD-OCT) method was proposed to examine the thin layers in real time. This paper describes a nondestructive approach and all required signal processing steps to characterize the thin inner layers and also to improve the imaging speed and the signal to noise ratio. The algorithm was developed by using graphics processing unit (GPU) with computer unified device architecture (CUDA). This GPU-accelerated white light interferometry technique nondestructively assesses the samples and has high imaging speed advantage, overcoming the bottlenecks in PET performs quality control.

Effects of a giant exercising board game intervention on ambulatory physical activity among nursing home residents: a preliminary study

PubMed Central

Mouton, Alexandre; Gillet, Nicolas; Mouton, Flore; Van Kann, Dave; Bruyère, Olivier; Cloes, Marc; Buckinx, Fanny

2017-01-01

Purpose This study examined the effects of a giant (4×3 m) exercising board game intervention on ambulatory physical activity (PA) and a broader array of physical and psychological outcomes among nursing home residents. Materials and methods A quasi-experimental longitudinal study was carried out in two comparable nursing homes. Ten participants (aged 82.5±6.3 and comprising 6 women) meeting the inclusion criteria took part in the 1-month intervention in one nursing home, whereas 11 participants (aged 89.9±3.1 with 8 women) were assigned to the control group in the other nursing home. The giant exercising board game required participants to per-form strength, flexibility, balance and endurance activities. The assistance provided by an exercising specialist decreased gradually during the intervention in an autonomy-oriented approach based on the self-determination theory. The following were assessed at baseline, after the intervention and after a follow-up period of 3 months: PA (steps/day and energy expenditure/day with ActiGraph), cognitive status (mini mental state examination), quality of life (EuroQol 5-dimensions), motivation for PA (Behavioral Regulation in Exercise Questionnaire-2), gait and balance (Tinetti and Short Physical Performance Battery), functional mobility (timed up and go), and the muscular isometric strength of the lower limb muscles. Results and conclusion In the intervention group, PA increased from 2,921 steps/day at baseline to 3,358 steps/day after the intervention (+14.9%, P=0.04) and 4,083 steps/day (+39.8%, P=0.03) after 3 months. Energy expenditure/day also increased after the intervention (+110 kcal/day, +6.3%, P=0.01) and after 3 months (+219 kcal/day, +12.3%, P=0.02). Quality of life (P<0.05), balance and gait (P<0.05), and strength of the ankle (P<0.05) were also improved after 3 months. Such improvements were not observed in the control group. The preliminary results are promising but further investigation is required to confirm and evaluate the long-term effectiveness of PA interventions in nursing homes. PMID:28579765

Effects of a giant exercising board game intervention on ambulatory physical activity among nursing home residents: a preliminary study.

PubMed

Mouton, Alexandre; Gillet, Nicolas; Mouton, Flore; Van Kann, Dave; Bruyère, Olivier; Cloes, Marc; Buckinx, Fanny

2017-01-01

This study examined the effects of a giant (4×3 m) exercising board game intervention on ambulatory physical activity (PA) and a broader array of physical and psychological outcomes among nursing home residents. A quasi-experimental longitudinal study was carried out in two comparable nursing homes. Ten participants (aged 82.5±6.3 and comprising 6 women) meeting the inclusion criteria took part in the 1-month intervention in one nursing home, whereas 11 participants (aged 89.9±3.1 with 8 women) were assigned to the control group in the other nursing home. The giant exercising board game required participants to per-form strength, flexibility, balance and endurance activities. The assistance provided by an exercising specialist decreased gradually during the intervention in an autonomy-oriented approach based on the self-determination theory. The following were assessed at baseline, after the intervention and after a follow-up period of 3 months: PA (steps/day and energy expenditure/day with ActiGraph), cognitive status (mini mental state examination), quality of life (EuroQol 5-dimensions), motivation for PA (Behavioral Regulation in Exercise Questionnaire-2), gait and balance (Tinetti and Short Physical Performance Battery), functional mobility (timed up and go), and the muscular isometric strength of the lower limb muscles. In the intervention group, PA increased from 2,921 steps/day at baseline to 3,358 steps/day after the intervention (+14.9%, P =0.04) and 4,083 steps/day (+39.8%, P =0.03) after 3 months. Energy expenditure/day also increased after the intervention (+110 kcal/day, +6.3%, P =0.01) and after 3 months (+219 kcal/day, +12.3%, P =0.02). Quality of life ( P <0.05), balance and gait ( P <0.05), and strength of the ankle ( P <0.05) were also improved after 3 months. Such improvements were not observed in the control group. The preliminary results are promising but further investigation is required to confirm and evaluate the long-term effectiveness of PA interventions in nursing homes.

A simplified rotor system mathematical model for piloted flight dynamics simulation

NASA Technical Reports Server (NTRS)

Chen, R. T. N.

1979-01-01

The model was developed for real-time pilot-in-the-loop investigation of helicopter flying qualities. The mathematical model included the tip-path plane dynamics and several primary rotor design parameters, such as flapping hinge restraint, flapping hinge offset, blade Lock number, and pitch-flap coupling. The model was used in several exploratory studies of the flying qualities of helicopters with a variety of rotor systems. The basic assumptions used and the major steps involved in the development of the set of equations listed are described. The equations consisted of the tip-path plane dynamic equation, the equations for the main rotor forces and moments, and the equation for control phasing required to achieve decoupling in pitch and roll due to cyclic inputs.

Sequentially Executed Model Evaluation Framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

2015-10-20

Provides a message passing framework between generic input, model and output drivers, and specifies an API for developing such drivers. Also provides batch and real-time controllers which step the model and I/O through the time domain (or other discrete domain), and sample I/O drivers. This is a library framework, and does not, itself, solve any problems or execute any modeling. The SeMe framework aids in development of models which operate on sequential information, such as time-series, where evaluation is based on prior results combined with new data for this iteration. Has applications in quality monitoring, and was developed as partmore » of the CANARY-EDS software, where real-time water quality data is being analyzed for anomalies.« less

High-quality bulk hybrid perovskite single crystals within minutes by inverse temperature crystallization

NASA Astrophysics Data System (ADS)

Saidaminov, Makhsud I.; Abdelhady, Ahmed L.; Murali, Banavoth; Alarousu, Erkki; Burlakov, Victor M.; Peng, Wei; Dursun, Ibrahim; Wang, Lingfei; He, Yao; Maculan, Giacomo; Goriely, Alain; Wu, Tom; Mohammed, Omar F.; Bakr, Osman M.

2015-07-01

Single crystals of methylammonium lead trihalide perovskites (MAPbX3; MA=CH3NH3+, X=Br- or I-) have shown remarkably low trap density and charge transport properties; however, growth of such high-quality semiconductors is a time-consuming process. Here we present a rapid crystal growth process to obtain MAPbX3 single crystals, an order of magnitude faster than previous reports. The process is based on our observation of the substantial decrease of MAPbX3 solubility, in certain solvents, at elevated temperatures. The crystals can be both size- and shape-controlled by manipulating the different crystallization parameters. Despite the rapidity of the method, the grown crystals exhibit transport properties and trap densities comparable to the highest quality MAPbX3 reported to date. The phenomenon of inverse or retrograde solubility and its correlated inverse temperature crystallization strategy present a major step forward for advancing the field on perovskite crystallization.

Challenges in Development of Sperm Repositories for Biomedical Fishes: Quality Control in Small-Bodied Species.

PubMed

Torres, Leticia; Liu, Yue; Guitreau, Amy; Yang, Huiping; Tiersch, Terrence R

2017-12-01

Quality control (QC) is essential for reproducible and efficient functioning of germplasm repositories. However, many biomedical fish models present significant QC challenges due to small body sizes (<5 cm) and miniscule sperm volumes (<5 μL). Using minimal volumes of sperm, we used Zebrafish to evaluate common QC endpoints as surrogates for fertilization success along sequential steps of cryopreservation. First, concentrations of calibration bead suspensions were evaluated with a Makler ® counting chamber by using different sample volumes and mixing methods. For sperm analysis, samples were initially diluted at a 1:30 ratio with Hanks' balanced salt solution (HBSS). Motility was evaluated by using different ratios of sperm and activation medium, and membrane integrity was analyzed with flow cytometry at different concentrations. Concentration and sperm motility could be confidently estimated by using volumes as small as 1 μL, whereas membrane integrity required a minimum of 2 μL (at 1 × 10 6 cells/mL). Thus, <5 μL of sperm suspension (after dilution to 30-150 μL with HBSS) was required to evaluate sperm quality by using three endpoints. Sperm quality assessment using a combination of complementary endpoints enhances QC efforts during cryopreservation, increasing reliability and reproducibility, and reducing waste of time and resources.

Tityus serrulatus Scorpion Venom: In Vitro Tests and Their Correlation with In Vivo Lethal Dose Assay

PubMed Central

Cajado-Carvalho, Daniela; Galvão, Juliana; Kuniyoshi, Alexandre K.; Carneiro, Patrícia dos Santos; Paes Leme, Adriana Franco; Pauletti, Bianca Alves; Marengo, Eliana Blini; Portaro, Fernanda V.

2017-01-01

Scorpion stings are the main cause of human envenomation in Brazil and, for the treatment of victims, the World Health Organization (WHO) recommends the use of antivenoms. The first step to achieve effective antivenom is to use a good quality venom pool and to evaluate it, with LD50 determination as the most accepted procedure. It is, however, time-consuming and requires advanced technical training. Further, there are significant ethical concerns regarding the number of animals required for testing. Hence, we investigated the correspondence between LD50 results, in vitro assays, and a strong correlation with proteolytic activity levels was observed, showing, remarkably, that proteases are potential toxicity markers for Tityus serrulatus venom. The comparison of reversed-phase chromatographic profiles also has a potential application in venoms’ quality control, as there were fewer neurotoxins detected in the venom with high LD50 value. These results were confirmed by mass spectrometry analysis. Therefore, these methods could precede the LD50 assay to evaluate the venom excellence by discriminating—and discarding—poor-quality batches, and, consequently, with a positive impact on the number of animals used. Notably, proposed assays are fast and inexpensive, being technically and economically feasible in Tityus serrulatus venom quality control to produce effective antivenoms. PMID:29168766

Small Steps Lead to Quality Assurance and Enhancement in Qatar University

ERIC Educational Resources Information Center

Al Attiyah, Asma; Khalifa, Batoul

2009-01-01

This paper presents a brief overview of Qatar University's history since it was started in 1973. Its primary focus is on the various small, but important, steps taken by the University to address the needs of quality assurance and enhancement. The Qatar University Reform Plan is described in detail. Its aims are to continually improve the quality…

Stepping motor controller

DOEpatents

Bourret, S.C.; Swansen, J.E.

1982-07-02

A stepping motor is microprocessor controlled by digital circuitry which monitors the output of a shaft encoder adjustably secured to the stepping motor and generates a subsequent stepping pulse only after the preceding step has occurred and a fixed delay has expired. The fixed delay is variable on a real-time basis to provide for smooth and controlled deceleration.

Assessment of polycarbonate filter in a molecular analytical system for the microbiological quality monitoring of recycled waters onboard ISS.

PubMed

Bechy-Loizeau, Anne-Laure; Flandrois, Jean-Pierre; Abaibou, Hafid

2015-07-01

On the ISS, as on Earth, water is an essential element for life and its quality control on a regular basis allows to ensure the health of the crew and the integrity of equipment. Currently, microbial water analysis onboard ISS still relies on the traditional culture-based microbiology methods. Molecular methods based on the amplification of nucleic acids for microbiological analysis of water quality show enormous potential and are considered as the best alternative to culture-based methods. For this reason, the Midass, a fully integrated and automated prototype was designed conjointly by ESA and bioMérieux for a rapid monitoring of the microbiological quality of air. The prototype allows air sampling, sample processing and the amplification/detection of nucleic acids. We describe herein the proof of principle of an analytical approach based on molecular biology that could fulfill the ESA's need for a rapid monitoring of the microbiological quality of recycled water onboard ISS. Both concentration and recovery of microorganisms are the main critical steps when the microfiltration technology is used for water analysis. Among filters recommended standards for monitoring the microbiological quality of the water, the polycarbonate filter was fully in line with the requirements of the ISO 7704-1985 standard in terms of efficacy of capture and recovery of bacteria. Moreover, this filter does not retain nucleic acids on the surface and has no inhibitory effect on their downstream processing steps such as purification and amplification/detection. Although the Midass system was designed for the treatment of air samples, the first results on the integration of PC filters were encouraging. Nevertheless, system modifications are needed to better adapt the Midass system for the monitoring of the microbiological water quality. Copyright © 2015 The Committee on Space Research (COSPAR). Published by Elsevier Ltd. All rights reserved.

[Quality assessment in anesthesia].

PubMed

Kupperwasser, B

1996-01-01

Quality assessment (assurance/improvement) is the set of methods used to measure and improve the delivered care and the department's performance against pre-established criteria or standards. The four stages of the self-maintained quality assessment cycle are: problem identification, problem analysis, problem correction and evaluation of corrective actions. Quality assessment is a measurable entity for which it is necessary to define and calibrate measurement parameters (indicators) from available data gathered from the hospital anaesthesia environment. Problem identification comes from the accumulation of indicators. There are four types of quality indicators: structure, process, outcome and sentinel indicators. The latter signal a quality defect, are independent of outcomes, are easier to analyse by statistical methods and closely related to processes and main targets of quality improvement. The three types of methods to analyse the problems (indicators) are: peer review, quantitative methods and risks management techniques. Peer review is performed by qualified anaesthesiologists. To improve its validity, the review process should be explicited and conclusions based on standards of practice and literature references. The quantitative methods are statistical analyses applied to the collected data and presented in a graphic format (histogram, Pareto diagram, control charts). The risks management techniques include: a) critical incident analysis establishing an objective relationship between a 'critical' event and the associated human behaviours; b) system accident analysis, based on the fact that accidents continue to occur despite safety systems and sophisticated technologies, checks of all the process components leading to the impredictable outcome and not just the human factors; c) cause-effect diagrams facilitate the problem analysis in reducing its causes to four fundamental components (persons, regulations, equipment, process). Definition and implementation of corrective measures, based on the findings of the two previous stages, are the third step of the evaluation cycle. The Hawthorne effect is an outcome improvement, before the implementation of any corrective actions. Verification of the implemented actions is the final and mandatory step closing the evaluation cycle.

Rapid identification of pearl powder from Hyriopsis cumingii by Tri-step infrared spectroscopy combined with computer vision technology

NASA Astrophysics Data System (ADS)

Liu, Siqi; Wei, Wei; Bai, Zhiyi; Wang, Xichang; Li, Xiaohong; Wang, Chuanxian; Liu, Xia; Liu, Yuan; Xu, Changhua

2018-01-01

Pearl powder, an important raw material in cosmetics and Chinese patent medicines, is commonly uneven in quality and frequently adulterated with low-cost shell powder in the market. The aim of this study is to establish an adequate approach based on Tri-step infrared spectroscopy with enhancing resolution combined with chemometrics for qualitative identification of pearl powder originated from three different quality grades of pearls and quantitative prediction of the proportions of shell powder adulterated in pearl powder. Additionally, computer vision technology (E-eyes) can investigate the color difference among different pearl powders and make it traceable to the pearl quality trait-visual color categories. Though the different grades of pearl powder or adulterated pearl powder have almost identical IR spectra, SD-IR peak intensity at about 861 cm- 1 (v2 band) exhibited regular enhancement with the increasing quality grade of pearls, while the 1082 cm- 1 (v1 band), 712 cm- 1 and 699 cm- 1 (v4 band) were just the reverse. Contrastly, only the peak intensity at 862 cm- 1 was enhanced regularly with the increasing concentration of shell powder. Thus, the bands in the ranges of (1550-1350 cm- 1, 730-680 cm- 1) and (830-880 cm- 1, 690-725 cm- 1) could be exclusive ranges to discriminate three distinct pearl powders and identify adulteration, respectively. For massive sample analysis, a qualitative classification model and a quantitative prediction model based on IR spectra was established successfully by principal component analysis (PCA) and partial least squares (PLS), respectively. The developed method demonstrated great potential for pearl powder quality control and authenticity identification in a direct, holistic manner.

Rational and design of a stepped-wedge cluster randomized trial evaluating quality improvement initiative for reducing cardiovascular events among patients with acute coronary syndromes in resource-constrained hospitals in China.

PubMed

Li, Shenshen; Wu, Yangfeng; Du, Xin; Li, Xian; Patel, Anushka; Peterson, Eric D; Turnbull, Fiona; Lo, Serigne; Billot, Laurent; Laba, Tracey; Gao, Runlin

2015-03-01

Acute coronary syndromes (ACSs) are a major cause of morbidity and mortality, yet effective ACS treatments are frequently underused in clinical practice. Randomized trials including the CPACS-2 study suggest that quality improvement initiatives can increase the use of effective treatments, but whether such programs can impact hard clinical outcomes has never been demonstrated in a well-powered randomized controlled trial. The CPACS-3 study is a stepped-wedge cluster-randomized trial conducted in 104 remote level 2 hospitals without PCI facilities in China. All hospitalized ACS patients will be recruited consecutively over a 30-month period to an anticipated total study population of more than 25,000 patients. After a 6-month baseline period, hospitals will be randomized to 1 of 4 groups, and a 6-component quality improvement intervention will be implemented sequentially in each group every 6months. These components include the following: establishment of a quality improvement team, implementation of a clinical pathway, training of physicians and nurses, hospital performance audit and feedback, online technical support, and patient education. All patients will be followed up for 6months postdischarge. The primary outcome will be the incidence of in-hospital major adverse cardiovascular events comprising all-cause mortality, myocardial infarction or reinfarction, and nonfatal stroke. The CPACS-3 study will be the first large randomized trial with sufficient power to assess the effects of a multifaceted quality of care improvement initiative on hard clinical outcomes, in patients with ACS. Copyright © 2014 Elsevier Inc. All rights reserved.

Rapid identification of pearl powder from Hyriopsis cumingii by Tri-step infrared spectroscopy combined with computer vision technology.

PubMed

Liu, Siqi; Wei, Wei; Bai, Zhiyi; Wang, Xichang; Li, Xiaohong; Wang, Chuanxian; Liu, Xia; Liu, Yuan; Xu, Changhua

2018-01-15

Pearl powder, an important raw material in cosmetics and Chinese patent medicines, is commonly uneven in quality and frequently adulterated with low-cost shell powder in the market. The aim of this study is to establish an adequate approach based on Tri-step infrared spectroscopy with enhancing resolution combined with chemometrics for qualitative identification of pearl powder originated from three different quality grades of pearls and quantitative prediction of the proportions of shell powder adulterated in pearl powder. Additionally, computer vision technology (E-eyes) can investigate the color difference among different pearl powders and make it traceable to the pearl quality trait-visual color categories. Though the different grades of pearl powder or adulterated pearl powder have almost identical IR spectra, SD-IR peak intensity at about 861cm -1 (v 2 band) exhibited regular enhancement with the increasing quality grade of pearls, while the 1082cm -1 (v 1 band), 712cm -1 and 699cm -1 (v 4 band) were just the reverse. Contrastly, only the peak intensity at 862cm -1 was enhanced regularly with the increasing concentration of shell powder. Thus, the bands in the ranges of (1550-1350cm -1 , 730-680cm -1 ) and (830-880cm -1 , 690-725cm -1 ) could be exclusive ranges to discriminate three distinct pearl powders and identify adulteration, respectively. For massive sample analysis, a qualitative classification model and a quantitative prediction model based on IR spectra was established successfully by principal component analysis (PCA) and partial least squares (PLS), respectively. The developed method demonstrated great potential for pearl powder quality control and authenticity identification in a direct, holistic manner. Copyright © 2017. Published by Elsevier B.V.

The level of emotional intelligence for patients with bronchial asthma and a group psychotherapy plan in 7 steps.

PubMed

Ropoteanu, Andreea-Corina

2011-01-01

Strong emotions, either positive or negative, as well as vulnerability to stress are often major factors in triggering, maintaining and emphasizing the symptoms of bronchial asthma. On a group of 99 patients suffering from moderately and severely persistent allergic bronchial asthma for more than 2 years, I applied a situational test of emotional intelligence, the NEO PI-R personality test provided by D&D Consultants and I also elaborated a psychosocial test form of asthma by which I evaluated the frequency of physical symptoms, the intensity of negative emotional symptoms arisen during or subsequent to the crisis and the level of the patients' quality of life. I have presumed first that if the level of the emotional intelligence grew, this fact would have a significant positive influence on controlling the negative emotional symptoms arisen during or subsequent to the crisis and on patients' quality of life. This was invalidated, the correlations between the mentioned variables being insignificant. Secondly, I have presumed the existence of positive significant correlations between the emotional intelligence coefficient and the personality dimensions: extraversion, openness, conscientiousness and a negative significant correlation between the emotional intelligence coefficient and the dimension neuroticism. This presumption was totally confirmed. Finally, we proposed a group psychotherapy plan in 7 steps for asthmatic patients that has as main objectives to improve symptoms and therefore the patients' quality of life.

A proposed metric for assessing the measurement quality of individual microarrays

PubMed Central

Kim, Kyoungmi; Page, Grier P; Beasley, T Mark; Barnes, Stephen; Scheirer, Katherine E; Allison, David B

2006-01-01

Background High-density microarray technology is increasingly applied to study gene expression levels on a large scale. Microarray experiments rely on several critical steps that may introduce error and uncertainty in analyses. These steps include mRNA sample extraction, amplification and labeling, hybridization, and scanning. In some cases this may be manifested as systematic spatial variation on the surface of microarray in which expression measurements within an individual array may vary as a function of geographic position on the array surface. Results We hypothesized that an index of the degree of spatiality of gene expression measurements associated with their physical geographic locations on an array could indicate the summary of the physical reliability of the microarray. We introduced a novel way to formulate this index using a statistical analysis tool. Our approach regressed gene expression intensity measurements on a polynomial response surface of the microarray's Cartesian coordinates. We demonstrated this method using a fixed model and presented results from real and simulated datasets. Conclusion We demonstrated the potential of such a quantitative metric for assessing the reliability of individual arrays. Moreover, we showed that this procedure can be incorporated into laboratory practice as a means to set quality control specifications and as a tool to determine whether an array has sufficient quality to be retained in terms of spatial correlation of gene expression measurements. PMID:16430768

Design of Low Complexity Model Reference Adaptive Controllers

NASA Technical Reports Server (NTRS)

Hanson, Curt; Schaefer, Jacob; Johnson, Marcus; Nguyen, Nhan

2012-01-01

Flight research experiments have demonstrated that adaptive flight controls can be an effective technology for improving aircraft safety in the event of failures or damage. However, the nonlinear, timevarying nature of adaptive algorithms continues to challenge traditional methods for the verification and validation testing of safety-critical flight control systems. Increasingly complex adaptive control theories and designs are emerging, but only make testing challenges more difficult. A potential first step toward the acceptance of adaptive flight controllers by aircraft manufacturers, operators, and certification authorities is a very simple design that operates as an augmentation to a non-adaptive baseline controller. Three such controllers were developed as part of a National Aeronautics and Space Administration flight research experiment to determine the appropriate level of complexity required to restore acceptable handling qualities to an aircraft that has suffered failures or damage. The controllers consist of the same basic design, but incorporate incrementally-increasing levels of complexity. Derivations of the controllers and their adaptive parameter update laws are presented along with details of the controllers implementations.

Iteratively improving Hi-C experiments one step at a time.

PubMed

Golloshi, Rosela; Sanders, Jacob T; McCord, Rachel Patton

2018-06-01

The 3D organization of eukaryotic chromosomes affects key processes such as gene expression, DNA replication, cell division, and response to DNA damage. The genome-wide chromosome conformation capture (Hi-C) approach can characterize the landscape of 3D genome organization by measuring interaction frequencies between all genomic regions. Hi-C protocol improvements and rapid advances in DNA sequencing power have made Hi-C useful to study diverse biological systems, not only to elucidate the role of 3D genome structure in proper cellular function, but also to characterize genomic rearrangements, assemble new genomes, and consider chromatin interactions as potential biomarkers for diseases. Yet, the Hi-C protocol is still complex and subject to variations at numerous steps that can affect the resulting data. Thus, there is still a need for better understanding and control of factors that contribute to Hi-C experiment success and data quality. Here, we evaluate recently proposed Hi-C protocol modifications as well as often overlooked variables in sample preparation and examine their effects on Hi-C data quality. We examine artifacts that can occur during Hi-C library preparation, including microhomology-based artificial template copying and chimera formation that can add noise to the downstream data. Exploring the mechanisms underlying Hi-C artifacts pinpoints steps that should be further optimized in the future. To improve the utility of Hi-C in characterizing the 3D genome of specialized populations of cells or small samples of primary tissue, we identify steps prone to DNA loss which should be considered to adapt Hi-C to lower cell numbers. Copyright © 2018 Elsevier Inc. All rights reserved.

Reduction of physical activity in daily life and its determinants in smokers without airflow obstruction.

PubMed

Furlanetto, Karina Couto; Mantoani, Leandro Cruz; Bisca, Gianna; Morita, Andrea Akemi; Zabatiero, Juliana; Proença, Mahara; Kovelis, Demétria; Pitta, Fabio

2014-04-01

In smokers without airflow obstruction, detailed, objective and controlled quantification of the level of physical inactivity in daily life has never been performed. This study aimed to objectively assess the level of physical activity in daily life in adult smokers without airflow obstruction in comparison with matched non-smokers, and to investigate the determinants for daily physical activity in smokers. Sixty smokers (aged 50 (39-54) years) and 50 non-smokers (aged 48 (40-53) years) matched for gender, age, anthropometric characteristics, educational level, employment status and seasons of the year assessment period were cross-sectionally assessed regarding their daily physical activity with a step counter, besides assessment of lung function, functional exercise capacity, quality of life, anxiety, depression, self-reported comorbidities carbon monoxide level, nicotine dependence and smoking habits. When compared with non-smokers, smokers walked less in daily life (7923 ± 3558 vs 9553 ± 3637 steps/day, respectively), presented worse lung function, functional exercise capacity, quality of life, anxiety and depression. Multiple regression analyses identified functional exercise capacity, Borg fatigue, self-reported motivation/physical activity behaviour and cardiac disease as significant determinants of number of steps/day in smokers (partial r(2)  = 0.10, 0.12, 0.16 and 0.05; b = 15, -997, 1207 and -2330 steps/day, respectively; overall fit of the model R(2)  = 0.38; P < 0.001). Adult smokers without airflow obstruction presented reduced level of daily physical activity. Functional exercise capacity, extended fatigue sensation, aspects of motivation/physical activity behaviour and self-reported cardiac disease are significant determinants of physical activity in daily life in smokers. © 2014 The Authors. Respirology © 2014 Asian Pacific Society of Respirology.

Study protocol: using the Q-STEPS to assess and improve the quality of physical activity programmes for the elderly.

PubMed

Marques, Ana I; Rosa, Maria J; Amorim, Marlene; Soares, Pedro; Oliveira-Tavares, António; Santos, Rute; Mota, Jorge; Carvalho, Joana

2012-07-09

Aging is one of the most important and obvious phenomenon observed in our society. In the past years, there has been a growing concern in designing physical activity (PA) programmes for elderly people, because evidence suggests that such health promotion interventions may reduce the deleterious effects of the ageing process. Accordingly, a growing body of literature points to the importance of a sound approach to planning and evaluation in order to improve the quality of PA programmes. However, while numerous PA programmes have been designed for the elderly in recent years, their evaluation has been scarce. Quality management processes and tools provide a practical way for organisations to assess, identify and shed light on the areas requiring improvement. The Quality Self-assessment Tool for Exercise Programmes for Seniors (Q-STEPS) seems to provide a framework tailored to evaluate PA programmes for the elderly. The primary purpose of this study is 1) to determine feasibility, acceptability and usability of the Q-STEPS. Secondary purposes of the study are: 2) to examine the quality of the PA programmes for elderly people developed by the Portuguese Local Administration over a three-year period of self-assessments in terms of: a) Enabler domains (Leadership, Policy and Strategy, People, Partnership and Resources, Processes); b) Result domains (Customer Results, People Results, Society Results and Key Performance Results); 3) to estimate the association between the use of Q-STEPS and some indicators relating to the elderly participants, during the three self-assessments, such as: attendance rates, physical fitness, health-related quality of life and the elderly's perceived quality of the programme. The study will be conducted in PA programmes for elderly adults from mainland Portuguese municipalities over a three-year period. The project will adopt a participative quality improvement approach that features annual learning cycles of: 1) self-assessment with the Q-STEPS; 2) feedback to and interpretation of results involving programme's staff; 3) action planning to achieve system changes; 4) implementation of strategies for change; and 5) review process through further self-assessment. The study will collect a range of process and outcome data that will be used to achieve the research aims. It is our understanding that the results of the Q-STEPS study will contribute directly to the evidence based on effectiveness of continuous quality improvement approaches, in order to improve customer satisfaction and adherence to PA programmes targeting the ageing population. This comprehensive evaluation will also add significant new knowledge regarding the characteristics associated with a sustainable public service.

Quality specifications in postgraduate medical e-learning: an integrative literature review leading to a postgraduate medical e-learning model.

PubMed

De Leeuw, R A; Westerman, Michiel; Nelson, E; Ket, J C F; Scheele, F

2016-07-08

E-learning is driving major shifts in medical education. Prioritizing learning theories and quality models improves the success of e-learning programs. Although many e-learning quality standards are available, few are focused on postgraduate medical education. We conducted an integrative review of the current postgraduate medical e-learning literature to identify quality specifications. The literature was thematically organized into a working model. Unique quality specifications (n = 72) were consolidated and re-organized into a six-domain model that we called the Postgraduate Medical E-learning Model (Postgraduate ME Model). This model was partially based on the ISO-19796 standard, and drew on cognitive load multimedia principles. The domains of the model are preparation, software design and system specifications, communication, content, assessment, and maintenance. This review clarified the current state of postgraduate medical e-learning standards and specifications. It also synthesized these specifications into a single working model. To validate our findings, the next-steps include testing the Postgraduate ME Model in controlled e-learning settings.

Lateral stepping for postural correction in Parkinson's disease.

PubMed

King, Laurie A; Horak, Fay B

2008-03-01

To characterize the lateral stepping strategies for postural correction in patients with Parkinson's disease (PD) and the effect of their anti-parkinson medication. Observational study. Outpatient neuroscience laboratory. Thirteen participants with idiopathic PD in their on (PD on) and off (PD off) levodopa state and 14 healthy elderly controls. Movable platform with lateral translations of 12 cm at 14.6 cm/s ramp velocity. The incidence and characteristics of 3 postural strategies were observed: lateral side-step, crossover step, or no step. Corrective stepping was characterized by latency to step after perturbation onset, step velocity, and step length and presence of an anticipatory postural adjustment (APA). Additionally, percentages of trials resulting in falls were identified for each group. Whereas elderly control participants never fell, PD participants fell in 24% and 35% of trials in the on and off medication states, respectively. Both PD and control participants most often used a lateral side-step strategy; 70% (control), 67% (PD off), and 73% (PD on) of all trials, respectively. PD participants fell most often when using a crossover strategy (75% of all crossover trials) or no-step strategy (100% of all no-step trials). In the off medication state, PD participants' lateral stepping strategies were initiated later than controls (370+/-37 ms vs 280+/-10 ms, P<.01), and steps were smaller (254+/-20 mm vs 357+/-17 mm, P<.01) and slower (0.99+/-0.08 m/s vs 1.20+/-0.07 m/s, P<.05). No differences were found between the PD off versus PD on state in the corrective stepping characteristics. Unlike control participants, PD participants often (56% of side-step strategy trials) failed to activate an APA before stepping, although their APAs, when present, were of similar latency and magnitude as for control participants. Levodopa on or off state did not significantly affect falls, APAs, or lateral step latency, velocity, or amplitude (P>.05). PD participants showed significantly more postural instability and falls than age-matched controls when stepping was required for postural correction in response to lateral disequilibrium. Although PD participants usually used a similar lateral stepping strategy as controls in response to lateral translations, lack of an anticipatory lateral weight shift, and bradykinetic characteristics of the stepping responses help explain the greater rate of falls in participants with PD. Differences were not found between the levodopa on and off states. The results suggest that rehabilitation aimed at improving lateral stability in PD should include facilitating APAs before a lateral side-stepping strategy with faster and larger steps to recover equilibrium.

Molgenis-impute: imputation pipeline in a box.

PubMed

Kanterakis, Alexandros; Deelen, Patrick; van Dijk, Freerk; Byelas, Heorhiy; Dijkstra, Martijn; Swertz, Morris A

2015-08-19

Genotype imputation is an important procedure in current genomic analysis such as genome-wide association studies, meta-analyses and fine mapping. Although high quality tools are available that perform the steps of this process, considerable effort and expertise is required to set up and run a best practice imputation pipeline, particularly for larger genotype datasets, where imputation has to scale out in parallel on computer clusters. Here we present MOLGENIS-impute, an 'imputation in a box' solution that seamlessly and transparently automates the set up and running of all the steps of the imputation process. These steps include genome build liftover (liftovering), genotype phasing with SHAPEIT2, quality control, sample and chromosomal chunking/merging, and imputation with IMPUTE2. MOLGENIS-impute builds on MOLGENIS-compute, a simple pipeline management platform for submission and monitoring of bioinformatics tasks in High Performance Computing (HPC) environments like local/cloud servers, clusters and grids. All the required tools, data and scripts are downloaded and installed in a single step. Researchers with diverse backgrounds and expertise have tested MOLGENIS-impute on different locations and imputed over 30,000 samples so far using the 1,000 Genomes Project and new Genome of the Netherlands data as the imputation reference. The tests have been performed on PBS/SGE clusters, cloud VMs and in a grid HPC environment. MOLGENIS-impute gives priority to the ease of setting up, configuring and running an imputation. It has minimal dependencies and wraps the pipeline in a simple command line interface, without sacrificing flexibility to adapt or limiting the options of underlying imputation tools. It does not require knowledge of a workflow system or programming, and is targeted at researchers who just want to apply best practices in imputation via simple commands. It is built on the MOLGENIS compute workflow framework to enable customization with additional computational steps or it can be included in other bioinformatics pipelines. It is available as open source from: https://github.com/molgenis/molgenis-imputation.

Improving transcriptome construction in non-model organisms: integrating manual and automated gene definition in Emiliania huxleyi.

PubMed

Feldmesser, Ester; Rosenwasser, Shilo; Vardi, Assaf; Ben-Dor, Shifra

2014-02-22

The advent of Next Generation Sequencing technologies and corresponding bioinformatics tools allows the definition of transcriptomes in non-model organisms. Non-model organisms are of great ecological and biotechnological significance, and consequently the understanding of their unique metabolic pathways is essential. Several methods that integrate de novo assembly with genome-based assembly have been proposed. Yet, there are many open challenges in defining genes, particularly where genomes are not available or incomplete. Despite the large numbers of transcriptome assemblies that have been performed, quality control of the transcript building process, particularly on the protein level, is rarely performed if ever. To test and improve the quality of the automated transcriptome reconstruction, we used manually defined and curated genes, several of them experimentally validated. Several approaches to transcript construction were utilized, based on the available data: a draft genome, high quality RNAseq reads, and ESTs. In order to maximize the contribution of the various data, we integrated methods including de novo and genome based assembly, as well as EST clustering. After each step a set of manually curated genes was used for quality assessment of the transcripts. The interplay between the automated pipeline and the quality control indicated which additional processes were required to improve the transcriptome reconstruction. We discovered that E. huxleyi has a very high percentage of non-canonical splice junctions, and relatively high rates of intron retention, which caused unique issues with the currently available tools. While individual tools missed genes and artificially joined overlapping transcripts, combining the results of several tools improved the completeness and quality considerably. The final collection, created from the integration of several quality control and improvement rounds, was compared to the manually defined set both on the DNA and protein levels, and resulted in an improvement of 20% versus any of the read-based approaches alone. To the best of our knowledge, this is the first time that an automated transcript definition is subjected to quality control using manually defined and curated genes and thereafter the process is improved. We recommend using a set of manually curated genes to troubleshoot transcriptome reconstruction.

Methods for making deposited films with improved microstructures

DOEpatents

Patten, James W.; Moss, Ronald W.; McClanahan, Edwin D.

1982-01-01

Methods for improving microstructures of line-of-sight deposited films are described. Columnar growth defects ordinarily produced by geometrical shadowing during deposition of such films are eliminated without resorting to post-deposition thermal or mechanical treatments. The native, as-deposited coating qualities, including homogeneity, fine grain size, and high coating-to-substrate adherence, can thus be retained. The preferred method includes the steps of emitting material from a source toward a substrate to deposit a coating non-uniformly on the substrate surface, removing a portion of the coating uniformly over the surface, again depositing material onto the surface, but from a different direction, and repeating the foregoing steps. The quality of line-of-sight deposited films such as those produced by sputtering, progressively deteriorates as the angle of incidence between the flux and the surface becomes increasingly acute. Depositing non-uniformly, so that the coating becomes progressively thinner as quality deteriorates, followed by uniformly removing some of the coating, such as by resputtering, eliminates the poor quality portions, leaving only high quality portions of the coating. Subsequently sputtering from a different direction applies a high quality coating to other regions of the surface. Such steps can be performed either simultaneously or sequentially to apply coatings of a uniformly high quality, closed microstructure to three-dimensional or larger planar surfaces.

Deposited films with improved microstructures

DOEpatents

Patten, James W.; Moss, Ronald W.; McClanahan, Edwin D.

1984-01-01

Methods for improving microstructures of line-of-sight deposited films are described. Columnar growth defects ordinarily produced by geometrical shadowing during deposition of such films are eliminated without resorting to post-deposition thermal or mechanical treatments. The native, as-deposited coating qualities, including homogeneity, fine grain size, and high coating-to-substrate adherence, can thus be retained. The preferred method includes the steps of emitting material from a source toward a substrate to deposit a coating non-uniformly on the substrate surface, removing a portion of the coating uniformly over the surface, again depositing material onto the surface, but from a different direction, and repeating the foregoing steps. The quality of line-of-sight deposited films such as those produced by sputtering, progressively deteriorates as the angle of incidence between the flux and the surface becomes increasingly acute. Depositing non-uniformly, so that the coating becomes progressively thinner as quality deteriorates, followed by uniformly removing some of the coating, such as by resputtering, eliminates the poor quality portions, leaving only high quality portions of the coating. Subsequently sputtering from a different direction applies a high quality coating to other regions of the surface. Such steps can be performed either simultaneously or sequentially to apply coatings of a uniformly high quality, closed microstructure to three-dimensional or large planar surfaces.

Improving HIV outcomes in resource-limited countries: the importance of quality indicators.

PubMed

Ahonkhai, Aima A; Bassett, Ingrid V; Ferris, Timothy G; Freedberg, Kenneth A

2012-11-24

Resource-limited countries increasingly depend on quality indicators to improve outcomes within HIV treatment programs, but indicators of program performance suitable for use at the local program level remain underdeveloped. Using the existing literature as a guide, we applied standard quality improvement (QI) concepts to the continuum of HIV care from HIV diagnosis, to enrollment and retention in care, and highlighted critical service delivery process steps to identify opportunities for performance indicator development. We then identified existing indicators to measure program performance, citing examples used by pivotal donor agencies, and assessed their feasibility for use in surveying local program performance. Clinical delivery steps without existing performance measures were identified as opportunities for measure development. Using National Quality Forum (NQF) criteria as a guide, we developed measurement concepts suitable for use at the local program level that address existing gaps in program performance assessment. This analysis of the HIV continuum of care identified seven critical process steps providing numerous opportunities for performance measurement. Analysis of care delivery process steps and the application of NQF criteria identified 24 new measure concepts that are potentially useful for improving operational performance in HIV care at the local level. An evidence-based set of program-level quality indicators is critical for the improvement of HIV care in resource-limited settings. These performance indicators should be utilized as treatment programs continue to grow.

Improving maternity care using a personal health record: study protocol for a stepped-wedge, randomised, controlled trial.

PubMed

Groenen, Carola J M; Faber, Marjan J; Kremer, Jan A M; Vandenbussche, Frank P H A; van Duijnhoven, Noortje T L

2016-04-16

A personal health record (PHR) is an online application through which individuals can access, manage, and share their health information in a private, secure, and confidential environment. Personal health records empower patients, facilitate collaboration among healthcare professionals, and improve health outcomes. Given these anticipated positive effects, we want to implement a PHR, named MyPregn@ncy, in a Dutch maternity care setting and to evaluate its effects in routine care. This paper presents the study protocol. The effects of implementing a PHR in maternity care on patients and professionals will be identified in a stepped-wedge, cluster-randomised, controlled trial. The study will be performed in the region of Nijmegen, a Dutch area with an average of 4,500 births a year and more than 230 healthcare professionals involved in maternity care. Data analyses will describe the effects of MyPregn@ncy on health outcomes in maternity care, quality of care from the patients' perspectives, and collaboration among healthcare professionals. Additionally, a process evaluation of the implementation of MyPregn@ncy will be performed. Data will be collected using data from the Dutch perinatal registry, questionnaires, interviews, and log data. The study is expected to yield new information about the effects, strengths, possibilities, and challenges to the implementation and usage of a PHR in routine maternal care settings. Results may lead to new insights and improvements in the quality of maternal and perinatal care. Netherlands Trial Register: NTR4063.

Methods for processing microarray data.

PubMed

Ares, Manuel

2014-02-01

Quality control must be maintained at every step of a microarray experiment, from RNA isolation through statistical evaluation. Here we provide suggestions for analyzing microarray data. Because the utility of the results depends directly on the design of the experiment, the first critical step is to ensure that the experiment can be properly analyzed and interpreted. What is the biological question? What is the best way to perform the experiment? How many replicates will be required to obtain the desired statistical resolution? Next, the samples must be prepared, pass quality controls for integrity and representation, and be hybridized and scanned. Also, slides with defects, missing data, high background, or weak signal must be rejected. Data from individual slides must be normalized and combined so that the data are as free of systematic bias as possible. The third phase is to apply statistical filters and tests to the data to determine genes (1) expressed above background, (2) whose expression level changes in different samples, and (3) whose RNA-processing patterns or protein associations change. Next, a subset of the data should be validated by an alternative method, such as reverse transcription-polymerase chain reaction (RT-PCR). Provided that this endorses the general conclusions of the array analysis, gene sets whose expression, splicing, polyadenylation, protein binding, etc. change in different samples can be classified with respect to function, sequence motif properties, as well as other categories to extract hypotheses for their biological roles and regulatory logic.

AB012. Current burden of uncontrolled asthma in the general population: the OPCRD asthma state of the Union study

PubMed Central

Nibber, Anjan; Thomas, Mike; Thomas, Vicky; van Aalderen, Wim; Bleecker, Eugene; Campbell, Jonathan; Roche, Nicolas; Haughney, John; Van Ganse, Eric; Park, Hye-Yun; Rhee, Chin Kook; Skinner, Derek; Chisholm, Alison; van Boven, Job FM; Soriano, Joan B.; Price, David

2016-01-01

Background Questionnaire-based surveys report that uncontrolled asthma is common in Europe, and associated with high healthcare costs. The relationship between treatment step control are less well described. To quantify the asthma burden within routine primary care in the UK, specifically the distribution of asthma control across guideline-recommended management steps and the association between patients’ control and smoking status. Methods Patients were retrospectively identified using the Optimum Patient Care Research Database and prospectively followed-up for at least 1-year. Patients’ routine clinical data and self reports were used to assess GINA control status; clinical records were used to categorise current treatment by GINA management steps and patients’ smoking status. Results A total of 105,018 eligible asthma patients were identified, mean (SD) age 45 (23) years; 55% female; 15% current and 24% ex-smokers. Only 20% of patients were controlled, 59% were partially controlled and 21% were uncontrolled. Control was only weakly correlated to GINA management steps (Spearman’s rho=0.15, P<0.001), 27.5%, 21.5%, 20.3%, 15.1% and 12.1% achieving control across Step 1 to 5, respectively. Similarly, the proportion with uncontrolled asthma rose across higher GINA steps (12.6%, 18.2%, 19.6%, 29.2% and 36.6%). About 13% of patients experienced at least one exacerbation in the 1-year follow-up period. Frequent exacerbations (2 or more per year) were very uncommon at lower treatment steps (step 1 11.6%, step 2 12.8%) but were significantly more common at steps 3 and 4 at 18.8% and 28.2% respectively (P<0.001 for trend with ascending treatment step). Conclusions In this cohort of UK primary care asthma patients, the majority failed to achieve GINA defined control. GINA management step was only weakly correlated with control status, but higher step management was associated with a greater risk of exacerbation.

Framework for enhancing clinical practice guidelines through continuous patient engagement.

PubMed

Armstrong, Melissa J; Rueda, Juan-David; Gronseth, Gary S; Mullins, C Daniel

2017-02-01

Patient engagement in clinical practice guideline (CPG) development is recommended by multiple institutions and instruments measuring guideline quality. Approaches to engaging patients, however, vary between oversight organizations, quality tools and guideline developers. We propose a ten-step framework outlining steps and options for patient engagement in guideline development with the goal of highlighting steps for patient engagement and methods by which this can be achieved. This framework provides a model for continuous patient engagement in CPGs by outlining ten steps of guideline development occurring at the levels of the developer/committee and the individual guideline project. At the developer level, patients can assist in topic nomination (step 1), topic prioritization (step 2) and guideline development group selection (step 3). Within specific guideline projects, patients' opinions may be incorporated when framing the question (step 4), creating an analytic framework and research plan (step 5), conducting the systematic review and conclusion formation (step 6), development of recommendations (step 7) and dissemination and implementation (step 8). At the end of process, patients can again be engaged at the developer level by helping determine when guidelines need updating (step 9) and evaluating the developer's approach to patient engagement (step 10). Patient engagement at each CPG development step has different purposes, mechanisms, advantages and disadvantages, and implications for resource utilization. This framework can serve as a resource for guideline developers desiring to increase patient engagement and reference for researchers investigating engagement methodology at different steps of the CPG lifecycle. © 2016 The Authors. Health Expectations Published by John Wiley & Sons Ltd.

The application of hazard analysis and critical control points and risk management in the preparation of anti-cancer drugs.

PubMed

Bonan, Brigitte; Martelli, Nicolas; Berhoune, Malik; Maestroni, Marie-Laure; Havard, Laurent; Prognon, Patrice

2009-02-01

To apply the Hazard analysis and Critical Control Points method to the preparation of anti-cancer drugs. To identify critical control points in our cancer chemotherapy process and to propose control measures and corrective actions to manage these processes. The Hazard Analysis and Critical Control Points application began in January 2004 in our centralized chemotherapy compounding unit. From October 2004 to August 2005, monitoring of the process nonconformities was performed to assess the method. According to the Hazard Analysis and Critical Control Points method, a multidisciplinary team was formed to describe and assess the cancer chemotherapy process. This team listed all of the critical points and calculated their risk indexes according to their frequency of occurrence, their severity and their detectability. The team defined monitoring, control measures and corrective actions for each identified risk. Finally, over a 10-month period, pharmacists reported each non-conformity of the process in a follow-up document. Our team described 11 steps in the cancer chemotherapy process. The team identified 39 critical control points, including 11 of higher importance with a high-risk index. Over 10 months, 16,647 preparations were performed; 1225 nonconformities were reported during this same period. The Hazard Analysis and Critical Control Points method is relevant when it is used to target a specific process such as the preparation of anti-cancer drugs. This method helped us to focus on the production steps, which can have a critical influence on product quality, and led us to improve our process.

HEPS Inventory Tool: An Inventory Tool Including Quality Assessment of School Interventions on Healthy Eating and Physical Activity

ERIC Educational Resources Information Center

Dadaczynski, Kevin; Paulus, Peter; de Vries, Nanne; de Ruiter, Silvia; Buijs, Goof

2010-01-01

The HEPS Inventory Tool aims to support stakeholders working in school health promotion to promote high quality interventions on healthy eating and physical activity. As a tool it provides a step-by-step approach on how to develop a national or regional inventory of existing school based interventions on healthy eating and physical activity. It…

An overview of technical considerations when using quantitative real-time PCR analysis of gene expression in human exercise research

PubMed Central

Yan, Xu; Bishop, David J.

2018-01-01

Gene expression analysis by quantitative PCR in skeletal muscle is routine in exercise studies. The reproducibility and reliability of the data fundamentally depend on how the experiments are performed and interpreted. Despite the popularity of the assay, there is a considerable variation in experimental protocols and data analyses from different laboratories, and there is a lack of consistency of proper quality control steps throughout the assay. In this study, we present a number of experiments on various steps of quantitative PCR workflow, and demonstrate how to perform a quantitative PCR experiment with human skeletal muscle samples in an exercise study. We also tested some common mistakes in performing qPCR. Interestingly, we found that mishandling of muscle for a short time span (10 mins) before RNA extraction did not affect RNA quality, and isolated total RNA was preserved for up to one week at room temperature. Demonstrated by our data, use of unstable reference genes lead to substantial differences in the final results. Alternatively, cDNA content can be used for data normalisation; however, complete removal of RNA from cDNA samples is essential for obtaining accurate cDNA content. PMID:29746477

An optimized immunohistochemistry protocol for detecting the guidance cue Netrin-1 in neural tissue.

PubMed

Salameh, Samer; Nouel, Dominique; Flores, Cecilia; Hoops, Daniel

2018-01-01

Netrin-1, an axon guidance protein, is difficult to detect using immunohistochemistry. We performed a multi-step, blinded, and controlled protocol optimization procedure to establish an efficient and effective fluorescent immunohistochemistry protocol for characterizing Netrin-1 expression. Coronal mouse brain sections were used to test numerous antigen retrieval methods and combinations thereof in order to optimize the stain quality of a commercially available Netrin-1 antibody. Stain quality was evaluated by experienced neuroanatomists for two criteria: signal intensity and signal-to-noise ratio. After five rounds of testing protocol variants, we established a modified immunohistochemistry protocol that produced a Netrin-1 signal with good signal intensity and a high signal-to-noise ratio. The key protocol modifications are as follows: •Use phosphate buffer (PB) as the blocking solution solvent.•Use 1% sodium dodecyl sulfate (SDS) treatment for antigen retrieval. The original protocol was optimized for use with the Netrin-1 antibody produced by Novus Biologicals. However, we subsequently further modified the protocol to work with the antibody produced by Abcam. The Abcam protocol uses PBS as the blocking solution solvent and adds a citrate buffer antigen retrieval step.

Fully Disposable Manufacturing Concepts for Clinical and Commercial Manufacturing and Ballroom Concepts.

PubMed

Boedeker, Berthold; Goldstein, Adam; Mahajan, Ekta

2017-11-04

The availability and use of pre-sterilized disposables has greatly changed the methods used in biopharmaceuticals development and production, particularly from mammalian cell culture. Nowadays, almost all process steps from cell expansion, fermentation, cell removal, and purification to formulation and storage of drug substances can be carried out in disposables, although there are still limitations with single-use technologies, particularly in the areas of pretesting and quality control of disposables, bag and connections standardization and qualification, extractables and leachables (E/L) validation, and dependency on individual vendors. The current status of single-use technologies is summarized for all process unit operations using a standard mAb process as an example. In addition, current pros and cons of using disposables are addressed in a comparative way, including quality control and E/L validation.The continuing progress in developing single-use technologies has an important impact on manufacturing facilities, resulting in much faster, less expensive and simpler plant design, start-up, and operation, because cell culture process steps are no longer performed in hard-piped unit operations. This leads to simpler operations in a lab-like environment. Overall it enriches the current landscape of available facilities from standard hard-piped to hard-piped/disposables hybrid to completely single-use-based production plants using the current segregation and containment concept. At the top, disposables in combination with completely and functionally closed systems facilitate a new, revolutionary design of ballroom facilities without or with much less segregation, which enables us to perform good manufacturing practice manufacturing of different products simultaneously in unclassified but controlled areas.Finally, single-use processing in lab-like shell facilities is a big enabler of transferring and establishing production in emergent countries, and this is described in more detail in 7. Graphical Abstract.

Cardio-PACs: a new opportunity

NASA Astrophysics Data System (ADS)

Heupler, Frederick A., Jr.; Thomas, James D.; Blume, Hartwig R.; Cecil, Robert A.; Heisler, Mary

2000-05-01

It is now possible to replace film-based image management in the cardiac catheterization laboratory with a Cardiology Picture Archiving and Communication System (Cardio-PACS) based on digital imaging technology. The first step in the conversion process is installation of a digital image acquisition system that is capable of generating high-quality DICOM-compatible images. The next three steps, which are the subject of this presentation, involve image display, distribution, and storage. Clinical requirements and associated cost considerations for these three steps are listed below: Image display: (1) Image quality equal to film, with DICOM format, lossless compression, image processing, desktop PC-based with color monitor, and physician-friendly imaging software; (2) Performance specifications include: acquire 30 frames/sec; replay 15 frames/sec; access to file server 5 seconds, and to archive 5 minutes; (3) Compatibility of image file, transmission, and processing formats; (4) Image manipulation: brightness, contrast, gray scale, zoom, biplane display, and quantification; (5) User-friendly control of image review. Image distribution: (1) Standard IP-based network between cardiac catheterization laboratories, file server, long-term archive, review stations, and remote sites; (2) Non-proprietary formats; (3) Bidirectional distribution. Image storage: (1) CD-ROM vs disk vs tape; (2) Verification of data integrity; (3) User-designated storage capacity for catheterization laboratory, file server, long-term archive. Costs: (1) Image acquisition equipment, file server, long-term archive; (2) Network infrastructure; (3) Review stations and software; (4) Maintenance and administration; (5) Future upgrades and expansion; (6) Personnel.

Automatic film processors' quality control test in Greek military hospitals.

PubMed

Lymberis, C; Efstathopoulos, E P; Manetou, A; Poudridis, G

1993-04-01

The two major military radiology installations (Athens, Greece) using a total of 15 automatic film processors were assessed using the 21-step-wedge method. The results of quality control in all these processors are presented. The parameters measured under actual working conditions were base and fog, contrast and speed. Base and fog as well as speed displayed large variations with average values generally higher than acceptable, whilst contrast displayed greater stability. Developer temperature was measured daily during the test and was found to be outside the film manufacturers' recommended limits in nine of the 15 processors. In only one processor did film passing time vary on an every day basis and this was due to maloperation. Developer pH test was not part of the daily monitoring service being performed every 5 days for each film processor and found to be in the range 9-12; 10 of the 15 processors presented pH values outside the limits specified by the film manufacturers.

Gran Telescopio Canarias Commissioning Instrument Optomechanics

NASA Astrophysics Data System (ADS)

Espejo, Carlos; Cuevas, Salvador; Sanchez, Beatriz; Flores, Ruben; Lara, Gerardo; Farah, Alejandro; Godoy, Javier; Bringas, Vicente; Chavoya, Armando; Dorantes, Ariel; Manuel Montoya, Juan; Rangel, Juan Carlos; Devaney, Nicholas; Castro, Javier; Cavaller, Luis

2003-02-01

Under a contract with the GRANTECAN, the Commissioning Instrument is a project developed by a team of Mexican scientists and engineers from the Instrumentation Department of the Astronomy Institute at the UNAM and the CIDESI Engineering Center. This paper will discuss in some detail the final Commissioning Instrument (CI) mechanical design and fabrication. We will also explain the error budget and the barrels design as well as their thermal compensation. The optical design and the control system are discussed in other papers. The CI will just act as a diagnostic tool for image quality verification during the GTC Commissioning Phase. This phase is a quality control process for achieving, verifying, and documenting the performance of each GTC sub-systems. This is a very important step for the telescope life. It will begin on starting day and will last for a year. The CI project started in December 2000. The critical design phase was reviewed in July 2001. The CI manufacturing is currently in progress and most parts are finished. We are now approaching the factory acceptance stage.

The MicroArray Quality Control (MAQC) project shows inter- and intraplatform reproducibility of gene expression measurements

PubMed Central

2012-01-01

Over the last decade, the introduction of microarray technology has had a profound impact on gene expression research. The publication of studies with dissimilar or altogether contradictory results, obtained using different microarray platforms to analyze identical RNA samples, has raised concerns about the reliability of this technology. The MicroArray Quality Control (MAQC) project was initiated to address these concerns, as well as other performance and data analysis issues. Expression data on four titration pools from two distinct reference RNA samples were generated at multiple test sites using a variety of microarray-based and alternative technology platforms. Here we describe the experimental design and probe mapping efforts behind the MAQC project. We show intraplatform consistency across test sites as well as a high level of interplatform concordance in terms of genes identified as differentially expressed. This study provides a resource that represents an important first step toward establishing a framework for the use of microarrays in clinical and regulatory settings. PMID:16964229

Rrp6 is recruited to transcribed genes and accompanies the spliced mRNA to the nuclear pore

PubMed Central

Hessle, Viktoria; von Euler, Anne; González de Valdivia, Ernesto; Visa, Neus

2012-01-01

Rrp6 is an exoribonuclease involved in the quality control of mRNA biogenesis. We have analyzed the association of Rrp6 with the Balbiani ring pre-mRNPs of Chironomus tentans to obtain insight into the role of Rrp6 in splicing surveillance. Rrp6 is recruited to transcribed genes and its distribution along the genes does not correlate with the positions of exons and introns. In the nucleoplasm, Rrp6 is bound to both unspliced and spliced transcripts. Rrp6 is released from the mRNPs in the vicinity of the nuclear pore before nucleo-cytoplasmic translocation. We show that Rrp6 is associated with newly synthesized transcripts during all the nuclear steps of gene expression and is associated with the transcripts independently of their splicing status. These observations suggest that the quality control of pre-mRNA splicing is not based on the selective recruitment of the exoribonuclease Rrp6 to unprocessed mRNAs. PMID:22745224

A systematic approach towards the development of quality indicators for postnatal care after discharge in Flanders, Belgium.

PubMed

Helsloot, Kaat; Walraevens, Mieke; Besauw, Saskia Van; Van Parys, An-Sofie; Devos, Hanne; Holsbeeck, Ann Van; Roelens, Kristien

2017-05-01

to develop a set of quality indicators for postnatal care after discharge from the hospital, using a systematic approach. key elements of qualitative postnatal care were defined by performing a systematic review and the literature was searched for potential indicators (step 1). The potential indicators were evaluated by five criteria (validity, reliability, sensitivity, feasibility and acceptability) and by making use of the 'Appraisal of Guidelines for Research and Evaluation', the AIRE-instrument (step 2). In a modified Delphi-survey, the quality indicators were presented to a panel of experts in the field of postnatal care using an online tool (step 3). The final results led to a Flemish model of postnatal care (step 4). Flanders, Belgium PARTICIPANTS: health care professionals, representatives of health care organisations and policy makers with expertise in the field of postnatal care. after analysis 57 research articles, 10 reviews, one book and eight other documents resulted in 150 potential quality indicators in seven critical care domains. Quality assessment of the indicators resulted in 58 concept quality indicators which were presented to an expert-panel of health care professionals. After two Delphi-rounds, 30 quality indicators (six structure, 17 process, and seven outcome indicators) were found appropriate to monitor and improve the quality of postnatal care after discharge from the hospital. KEY CONCLUSIONS AND IMPLICATIONS FOR CLINICAL PRACTICE: the quality indicators resulted in a Flemish model of qualitative postnatal care that was implemented by health authorities as a minimum standard in the context of shortened length of stay. Postnatal care should be adjusted to a flexible length of stay and start in pregnancy with an individualised care plan that follows mother and new-born throughout pregnancy, childbirth and postnatal period. Criteria for discharge and local protocols about the organisation and content of care are essential to facilitate continuity of care. Copyright © 2017 Elsevier Ltd. All rights reserved.

Continuous quality improvement in the ambulatory endoscopy center.

PubMed

Johanson, John F

2002-04-01

What does quality assessment have to do with the practicing gastroenterologist? Why should one spend the time and effort to incorporate CQI activities into an already busy practice? First and foremost, quality improvement should directly benefit the patient by ensuring that they receive the highest quality of care possible. For example, comparing endoscopic use or outcomes, such as procedure success or complications, with national standards or other endoscopists in the same community may identify physicians who could benefit from additional training. Similar analyses may likewise identify outstanding physicians who might serve as resources for other physicians. Surveys of patient satisfaction may reveal deficiencies, which might be unknown to a physician who is otherwise technically excellent; deficiencies that would never have been uncovered by traditional measures of quality. Second, applying the techniques of CQI to study one's own practice can provide a competitive edge when vying for managed care or corporate contracts. In this regard, CQI can be used to document physician or practice performance through tracking of endoscopic use, procedure success and complication rates, and patient satisfaction. Finally, the rising concern among various patient advocacy groups has led to an increased emphasis on quality improvement, and in most cases it is a required activity as part of the accreditation process. Steps to quality improvement There is more to quality improvement than simply selecting and implementing a performance improvement plan. A number of steps have been suggested to achieve fundamental improvement in the quality of medical care [3]. The first is to use outcomes management for improvement rather than for judgment. One of the major criticisms of QA is that it will be used to judge physicians providing care. It is feared that CQI will be used to identify poor performers who will then be punished. This strategy leads to fear and inhibits an honest pursuit of improvement. Second, learning must be viewed as a process. A quality improvement plan that is successful in one setting may not be as favorable in another situation. Clinicians must be able to focus on their individual situations and adapt what others have implemented to their own practice. Third, the most important aspect of the quality improvement is the implementation step. It matters little if elegant studies of endoscopic complications or patient satisfaction are completed if the information is not used to improve the delivery of health care to every single patient. The delivery of medical care continues to evolve. Resources are becoming increasingly scarce and the progressive rise of health care expenditures suggests a need for control. In this zeal for cost constraint, quality must not be sacrificed. This new-found attention to quality must be extended to the level of the individual practitioner to ensure that individual patients' interests are protected and the best possible care is delivered regardless of the economic implications. As providers of health care, endoscopists need to take an active role in these efforts both in understanding and implementing the techniques of quality assessment into their practices. If physicians are not actively involved in data collection and measurement to improve the quality and value of their own work, someone else will undoubtedly assume this role.

Controlled sub-nanometer tuning of photonic crystal resonator by carbonaceous nano-dots.

PubMed

Seo, Min-Kyo; Park, Hong-Gyu; Yang, Jin-Kyu; Kim, Ju-Young; Kim, Se-Heon; Lee, Yong-Hee

2008-06-23

We propose and demonstrate a scheme that enables spectral tuning of a photonic crystal high-quality resonant mode, in steps finer than 0.2 nm, via electron beam induced deposition of carbonaceous nano-dots. The position and size of a nano-dot with a diameter of <100 nm are controlled to an accuracy on the order of nanometers. The possibility of selective modal tuning is also demonstrated by placing nano-dots at locations pre-determined by theoretical computation. The lasing threshold of a photonic crystal mode tends to increase when a nano-dot is grown at the point of strong electric field, showing the absorptive nature of the nano-dot.

Documenting an ISO 9000 Quality System.

ERIC Educational Resources Information Center

Fisher, Barry

1995-01-01

Discusses six steps to follow when documenting an ISO 9000 quality system: using ISO 9000 to develop a quality system, identifying a company's business processes, analyzing the business processes; describing the procedures, writing the quality manual, and working to the documented procedures. (SR)

Chemometric applications to assess quality and critical parameters of virgin and extra-virgin olive oil. A review.

PubMed

Gómez-Caravaca, Ana M; Maggio, Rubén M; Cerretani, Lorenzo

2016-03-24

Today virgin and extra-virgin olive oil (VOO and EVOO) are food with a large number of analytical tests planned to ensure its quality and genuineness. Almost all official methods demand high use of reagents and manpower. Because of that, analytical development in this area is continuously evolving. Therefore, this review focuses on analytical methods for EVOO/VOO which use fast and smart approaches based on chemometric techniques in order to reduce time of analysis, reagent consumption, high cost equipment and manpower. Experimental approaches of chemometrics coupled with fast analytical techniques such as UV-Vis spectroscopy, fluorescence, vibrational spectroscopies (NIR, MIR and Raman fluorescence), NMR spectroscopy, and other more complex techniques like chromatography, calorimetry and electrochemical techniques applied to EVOO/VOO production and analysis have been discussed throughout this work. The advantages and drawbacks of this association have also been highlighted. Chemometrics has been evidenced as a powerful tool for the oil industry. In fact, it has been shown how chemometrics can be implemented all along the different steps of EVOO/VOO production: raw material input control, monitoring during process and quality control of final product. Copyright © 2016 Elsevier B.V. All rights reserved.

[Infrastructure and contents of clinical data management plan].

PubMed

Shen, Tong; Xu, Lie-dong; Fu, Hai-jun; Liu, Yan; He, Jia; Chen, Ping-yan; Song, Yu-fei

2015-11-01

Establishment of quality management system (QMS) plays a critical role in the clinical data management (CDM). The objectives of CDM are to ensure the quality and integrity of the trial data. Thus, every stage or element that may impact the quality outcomes of clinical studies should be in the controlled manner, which is referred to the full life cycle of CDM associated with the data collection, handling and statistical analysis of trial data. Based on the QMS, this paper provides consensus on how to develop a compliant clinical data management plan (CDMP). According to the essential requirements of the CDM, the CDMP should encompass each process of data collection, data capture and cleaning, medical coding, data verification and reconciliation, database monitoring and management, external data transmission and integration, data documentation and data quality assurance and so on. Creating and following up data management plan in each designed data management steps, dynamically record systems used, actions taken, parties involved will build and confirm regulated data management processes, standard operational procedures and effective quality metrics in all data management activities. CDMP is one of most important data management documents that is the solid foundation for clinical data quality.

Controlled Formation of Radial Core-Shell Si/Metal Silicide Crystalline Heterostructures.

PubMed

Kosloff, Alon; Granot, Eran; Barkay, Zahava; Patolsky, Fernando

2018-01-10

The highly controlled formation of "radial" silicon/NiSi  core-shell nanowire heterostructures has been demonstrated for the first time. Here, we investigated the "radial" diffusion of nickel atoms into crystalline nanoscale silicon pillar 11 cores, followed by nickel silicide phase formation and the creation of a well-defined shell structure. The described approach is based on a two-step thermal process, which involves metal diffusion at low temperatures in the range of 200-400 °C, followed by a thermal curing step at a higher temperature of 400 °C. In-depth crystallographic analysis was performed by nanosectioning the resulting silicide-shelled silicon nanopillar heterostructures, giving us the ability to study in detail the newly formed silicide shells. Remarkably, it was observed that the resulting silicide shell thickness has a self-limiting behavior, and can be tightly controlled by the modulation of the initial diffusion-step temperature. In addition, electrical measurements of the core-shell structures revealed that the resulting shells can serve as an embedded conductive layer in future optoelectronic applications. This research provides a broad insight into the Ni silicide "radial" diffusion process at the nanoscale regime, and offers a simple approach to form thickness-controlled metal silicide shells in the range of 5-100 nm around semiconductor nanowire core structures, regardless the diameter of the nanowire cores. These high quality Si/NiSi core-shell nanowire structures will be applied in the near future as building blocks for the creation of utrathin highly conductive optically transparent top electrodes, over vertical nanopillars-based solar cell devices, which may subsequently lead to significant performance improvements of these devices in terms of charge collection and reduced recombination.

Analytical method for promoting process capability of shock absorption steel.

PubMed

Sung, Wen-Pei; Shih, Ming-Hsiang; Chen, Kuen-Suan

2003-01-01

Mechanical properties and low cycle fatigue are two factors that must be considered in developing new type steel for shock absorption. Process capability and process control are significant factors in achieving the purpose of research and development programs. Often-used evaluation methods failed to measure process yield and process centering; so this paper uses Taguchi loss function as basis to establish an evaluation method and the steps for assessing the quality of mechanical properties and process control of an iron and steel manufacturer. The establishment of this method can serve the research and development and manufacturing industry and lay a foundation in enhancing its process control ability to select better manufacturing processes that are more reliable than decision making by using the other commonly used methods.

Statistical process control and verifying positional accuracy of a cobra motion couch using step-wedge quality assurance tool.

PubMed

Binny, Diana; Lancaster, Craig M; Trapp, Jamie V; Crowe, Scott B

2017-09-01

This study utilizes process control techniques to identify action limits for TomoTherapy couch positioning quality assurance tests. A test was introduced to monitor accuracy of the applied couch offset detection in the TomoTherapy Hi-Art treatment system using the TQA "Step-Wedge Helical" module and MVCT detector. Individual X-charts, process capability (cp), probability (P), and acceptability (cpk) indices were used to monitor a 4-year couch IEC offset data to detect systematic and random errors in the couch positional accuracy for different action levels. Process capability tests were also performed on the retrospective data to define tolerances based on user-specified levels. A second study was carried out whereby physical couch offsets were applied using the TQA module and the MVCT detector was used to detect the observed variations. Random and systematic variations were observed for the SPC-based upper and lower control limits, and investigations were carried out to maintain the ongoing stability of the process for a 4-year and a three-monthly period. Local trend analysis showed mean variations up to ±0.5 mm in the three-monthly analysis period for all IEC offset measurements. Variations were also observed in the detected versus applied offsets using the MVCT detector in the second study largely in the vertical direction, and actions were taken to remediate this error. Based on the results, it was recommended that imaging shifts in each coordinate direction be only applied after assessing the machine for applied versus detected test results using the step helical module. User-specified tolerance levels of at least ±2 mm were recommended for a test frequency of once every 3 months to improve couch positional accuracy. SPC enables detection of systematic variations prior to reaching machine tolerance levels. Couch encoding system recalibrations reduced variations to user-specified levels and a monitoring period of 3 months using SPC facilitated in detecting systematic and random variations. SPC analysis for couch positional accuracy enabled greater control in the identification of errors, thereby increasing confidence levels in daily treatment setups. © 2017 Royal Brisbane and Women's Hospital, Metro North Hospital and Health Service. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

Production of long-term global water vapor and liquid water data set using ultra-fast methods to assimilate multi-satellite and radiosonde observations

NASA Technical Reports Server (NTRS)

Vonderhaar, T. H.; Reinke, Donald L.; Randel, David L.; Stephens, Graeme L.; Combs, Cynthia L.; Greenwald, Thomas J.; Ringerud, Mark A.; Wittmeyer, Ian L.

1993-01-01

During the next decade, many programs and experiments under the Global Energy and Water Cycle Experiment (GEWEX) will utilize present day and future data sets to improve our understanding of the role of moisture in climate, and its interaction with other variables such as clouds and radiation. An important element of GEWEX will be the GEWEX Water Vapor Project (GVaP), which will eventually initiate a routine, real-time assimilation of the highest quality, global water vapor data sets including information gained from future data collection systems, both ground and space based. The comprehensive global water vapor data set being produced by METSAT Inc. uses a combination of ground-based radiosonde data, and infrared and microwave satellite retrievals. This data is needed to provide the desired foundation from which future GEWEX-related research, such as GVaP, can build. The first year of this project was designed to use a combination of the best available atmospheric moisture data including: radiosonde (balloon/acft/rocket), HIRS/MSU (TOVS) retrievals, and SSM/I retrievals, to produce a one-year, global, high resolution data set of integrated column water vapor (precipitable water) with a horizontal resolution of 1 degree, and a temporal resolution of one day. The time period of this pilot product was to be det3ermined by the availability of all the input data sets. January 1988 through December 1988 were selected. In addition, a sample of vertically integrated liquid water content (LWC) was to be produced with the same temporal and spatial parameters. This sample was to be produced over ocean areas only. Three main steps are followed to produce a merged water vapor and liquid water product. Input data from Radiosondes, TOVS, and SSMI/I is quality checked in steps one and two. Processing is done in step two to generate individual total column water vapor and liquid water data sets. The third step, and final processing task, involves merging the individual output products to produce the integrated water vapor product. A final quality control is applied to the merged data sets.

Single-step affinity purification of enzyme biotherapeutics: a platform methodology for accelerated process development.

PubMed

Brower, Kevin P; Ryakala, Venkat K; Bird, Ryan; Godawat, Rahul; Riske, Frank J; Konstantinov, Konstantin; Warikoo, Veena; Gamble, Jean

2014-01-01

Downstream sample purification for quality attribute analysis is a significant bottleneck in process development for non-antibody biologics. Multi-step chromatography process train purifications are typically required prior to many critical analytical tests. This prerequisite leads to limited throughput, long lead times to obtain purified product, and significant resource requirements. In this work, immunoaffinity purification technology has been leveraged to achieve single-step affinity purification of two different enzyme biotherapeutics (Fabrazyme® [agalsidase beta] and Enzyme 2) with polyclonal and monoclonal antibodies, respectively, as ligands. Target molecules were rapidly isolated from cell culture harvest in sufficient purity to enable analysis of critical quality attributes (CQAs). Most importantly, this is the first study that demonstrates the application of predictive analytics techniques to predict critical quality attributes of a commercial biologic. The data obtained using the affinity columns were used to generate appropriate models to predict quality attributes that would be obtained after traditional multi-step purification trains. These models empower process development decision-making with drug substance-equivalent product quality information without generation of actual drug substance. Optimization was performed to ensure maximum target recovery and minimal target protein degradation. The methodologies developed for Fabrazyme were successfully reapplied for Enzyme 2, indicating platform opportunities. The impact of the technology is significant, including reductions in time and personnel requirements, rapid product purification, and substantially increased throughput. Applications are discussed, including upstream and downstream process development support to achieve the principles of Quality by Design (QbD) as well as integration with bioprocesses as a process analytical technology (PAT). © 2014 American Institute of Chemical Engineers.

Basic and supplementary sensory feedback in handwriting

PubMed Central

Danna, Jérémy; Velay, Jean-Luc

2015-01-01

The mastering of handwriting is so essential in our society that it is important to try to find new methods for facilitating its learning and rehabilitation. The ability to control the graphic movements clearly impacts on the quality of the writing. This control allows both the programming of letter formation before movement execution and the online adjustments during execution, thanks to diverse sensory feedback (FB). New technologies improve existing techniques or enable new methods to supply the writer with real-time computer-assisted FB. The possibilities are numerous and various. Therefore, two main questions arise: (1) What aspect of the movement is concerned and (2) How can we best inform the writer to help them correct their handwriting? In a first step, we report studies on FB naturally used by the writer. The purpose is to determine which information is carried by each sensory modality, how it is used in handwriting control and how this control changes with practice and learning. In a second step, we report studies on supplementary FB provided to the writer to help them to better control and learn how to write. We suggest that, depending on their contents, certain sensory modalities will be more appropriate than others to assist handwriting motor control. We emphasize particularly the relevance of auditory modality as online supplementary FB on handwriting movements. Using real-time supplementary FB to assist in the handwriting process is probably destined for a brilliant future with the growing availability and rapid development of tablets. PMID:25750633

On quality control procedures for solar radiation and meteorological measures, from subhourly to montly average time periods

NASA Astrophysics Data System (ADS)

Espinar, B.; Blanc, P.; Wald, L.; Hoyer-Klick, C.; Schroedter-Homscheidt, M.; Wanderer, T.

2012-04-01

Meteorological data measured by ground stations are often a key element in the development and validation of methods exploiting satellite images. These data are considered as a reference against which satellite-derived estimates are compared. Long-term radiation and meteorological measurements are available from a large number of measuring stations. However, close examination of the data often reveals a lack of quality, often for extended periods of time. This lack of quality has been the reason, in many cases, of the rejection of large amount of available data. The quality data must be checked before their use in order to guarantee the inputs for the methods used in modelling, monitoring, forecast, etc. To control their quality, data should be submitted to several conditions or tests. After this checking, data that are not flagged by any of the test is released as a plausible data. In this work, it has been performed a bibliographical research of quality control tests for the common meteorological variables (ambient temperature, relative humidity and wind speed) and for the usual solar radiometrical variables (horizontal global and diffuse components of the solar radiation and the beam normal component). The different tests have been grouped according to the variable and the average time period (sub-hourly, hourly, daily and monthly averages). The quality test may be classified as follows: • Range checks: test that verify values are within a specific range. There are two types of range checks, those based on extrema and those based on rare observations. • Step check: test aimed at detecting unrealistic jumps or stagnation in the time series. • Consistency checks: test that verify the relationship between two or more time series. The gathered quality tests are applicable for all latitudes as they have not been optimized regionally nor seasonably with the aim of being generic. They have been applied to ground measurements in several geographic locations, what result in the detection of some control tests that are no longer adequate, due to different reasons. After the modification of some test, based in our experience, a set of quality control tests is now presented, updated according to technology advances and classified. The presented set of quality tests allows radiation and meteorological data to be tested in order to know their plausibility to be used as inputs in theoretical or empirical methods for scientific research. The research leading to those results has partly receive funding from the European Union's Seventh Framework Programme (FP7/2007-2013) under Grant Agreement no. 262892 (ENDORSE project).

What Determines Alumni Generosity?

ERIC Educational Resources Information Center

Baade, Robert A.; Sundberg, Jeffrey O.

1996-01-01

College alumni giving is correlated with institutional characteristics (quality and development efforts) and student characteristics (quality and wealth). This paper uses a two-step least-squares approach with data and quality/wealth variables to explore the "rich-student, quality-school" alumni generosity phenomenon. Alumni giving is…

Quality management in health care: a 20-year journey.

PubMed

Ruiz, Ulises

2004-01-01

In this article, the total quality programme in the Spanish healthcare system (1986-1992) and the subsequent quality improvement steps that have led to definition and implementation of such an integrated framework, seeking a quality management system and patient safety, are discussed.

Data Quality in Rare Diseases Registries.

PubMed

Kodra, Yllka; Posada de la Paz, Manuel; Coi, Alessio; Santoro, Michele; Bianchi, Fabrizio; Ahmed, Faisal; Rubinstein, Yaffa R; Weinbach, Jérôme; Taruscio, Domenica

2017-01-01

In the field of rare diseases, registries are considered power tool to develop clinical research, to facilitate the planning of appropriate clinical trials, to improve patient care and healthcare planning. Therefore high quality data of rare diseases registries is considered to be one of the most important element in the establishment and maintenance of a registry. Data quality can be defined as the totality of features and characteristics of data set that bear on its ability to satisfy the needs that result from the intended use of the data. In the context of registries, the 'product' is data, and quality refers to data quality, meaning that the data coming into the registry have been validated, and ready for use for analysis and research. Determining the quality of data is possible through data assessment against a number of dimensions: completeness, validity; coherence and comparability; accessibility; usefulness; timeliness; prevention of duplicate records. Many others factors may influence the quality of a registry: development of standardized Case Report Form and security/safety controls of informatics infrastructure. With the growing number of rare diseases registries being established, there is a need to develop a quality validation process to evaluate the quality of each registry. A clear description of the registry is the first step when assessing data quality or the registry evaluation system. Here we report a template as a guide for helping registry owners to describe their registry.

Understanding a Value Chain in Health Care.

PubMed

Sharan, Alok D; Schroeder, Gregory D; West, Michael E; Vaccaro, Alexander R

2015-10-01

As the US health care system transitions toward a value-based system, providers and health care organizations will have to closely scrutinize their current processes of care. To do this, a value chain analysis can be performed to ensure that only the most efficient steps are followed in patient care. Ultimately this will produce a higher quality or equal quality product for less cost by eliminating wasteful steps along the way.

Building Quality Report Cards for Geriatric Care in The Netherlands: Using Concept Mapping to Identify the Appropriate "Building Blocks" from the Consumer's Perspective

ERIC Educational Resources Information Center

Groenewoud, A. Stef; van Exel, N. Job A.; Berg, Marc; Huijsman, Robbert

2008-01-01

Purpose: This article reports on a study to identify "building blocks" for quality report cards for geriatric care. Its aim is to present (a) the results of the study and (b) the innovative step-by-step approach that was developed to arrive at these results. Design and Methods: We used Concept Mapping/Structured Conceptualization to…

A Selection Method That Succeeds!

ERIC Educational Resources Information Center

Weitman, Catheryn J.

Provided a structural selection method is carried out, it is possible to find quality early childhood personnel. The hiring process involves five definite steps, each of which establishes a base for the next. A needs assessment formulating basic minimal qualifications is the first step. The second step involves review of current job descriptions…

The Impact of Massage Therapy on Function in Pain Populations—A Systematic Review and Meta-Analysis of Randomized Controlled Trials: Part II, Cancer Pain Populations

PubMed Central

Boyd, Courtney; Crawford, Cindy; Paat, Charmagne F; Price, Ashley; Xenakis, Lea; Zhang, Weimin; Buckenmaier, Chester; Buckenmaier, Pamela; Cambron, Jerrilyn; Deery, Christopher; Schwartz, Jan; Werner, Ruth; Whitridge, Pete

2016-01-01

Abstract Purpose Pain is multi-dimensional and may be better addressed through a holistic, biopsychosocial approach. Massage therapy is commonly practiced among patients seeking pain management; however, its efficacy is unclear. This systematic review and meta-analysis is the first to rigorously assess the quality of massage therapy research and evidence for its efficacy in treating pain, function-related and health-related quality of life in cancer populations. Methods Key databases were searched from inception through February 2014. Eligible randomized controlled trials were assessed for methodological quality using the SIGN 50 Checklist. Meta-analysis was applied at the outcome level. A diverse steering committee interpreted the results to develop recommendations. Results Twelve high quality and four low quality studies were subsequently included in the review. Results demonstrate massage therapy is effective for treating pain compared to no treatment [standardized mean difference (SMD)  = −.20] and active (SMD = −0.55) comparators. Compared to active comparators, massage therapy was also found to be beneficial for treating fatigue (SMD = −1.06) and anxiety (SMD = −1.24). Conclusion Based on the evidence, weak recommendations are suggested for massage therapy, compared to an active comparator, for the treatment of pain, fatigue, and anxiety. No recommendations were suggested for massage therapy compared to no treatment or sham control based on the available literature to date. This review addresses massage therapy safety, research challenges, how to address identified research gaps, and necessary next steps for implementing massage therapy as a viable pain management option for cancer pain populations. PMID:27165967

The Impact of Massage Therapy on Function in Pain Populations-A Systematic Review and Meta-Analysis of Randomized Controlled Trials: Part II, Cancer Pain Populations.

PubMed

Boyd, Courtney; Crawford, Cindy; Paat, Charmagne F; Price, Ashley; Xenakis, Lea; Zhang, Weimin

2016-08-01

Pain is multi-dimensional and may be better addressed through a holistic, biopsychosocial approach. Massage therapy is commonly practiced among patients seeking pain management; however, its efficacy is unclear. This systematic review and meta-analysis is the first to rigorously assess the quality of massage therapy research and evidence for its efficacy in treating pain, function-related and health-related quality of life in cancer populations. Key databases were searched from inception through February 2014. Eligible randomized controlled trials were assessed for methodological quality using the SIGN 50 Checklist. Meta-analysis was applied at the outcome level. A diverse steering committee interpreted the results to develop recommendations. Twelve high quality and four low quality studies were subsequently included in the review. Results demonstrate massage therapy is effective for treating pain compared to no treatment [standardized mean difference (SMD)  = -.20] and active (SMD = -0.55) comparators. Compared to active comparators, massage therapy was also found to be beneficial for treating fatigue (SMD = -1.06) and anxiety (SMD = -1.24). Based on the evidence, weak recommendations are suggested for massage therapy, compared to an active comparator, for the treatment of pain, fatigue, and anxiety. No recommendations were suggested for massage therapy compared to no treatment or sham control based on the available literature to date. This review addresses massage therapy safety, research challenges, how to address identified research gaps, and necessary next steps for implementing massage therapy as a viable pain management option for cancer pain populations. © 2016 American Academy of Pain Medicine.

Nebula--a web-server for advanced ChIP-seq data analysis.

PubMed

Boeva, Valentina; Lermine, Alban; Barette, Camille; Guillouf, Christel; Barillot, Emmanuel

2012-10-01

ChIP-seq consists of chromatin immunoprecipitation and deep sequencing of the extracted DNA fragments. It is the technique of choice for accurate characterization of the binding sites of transcription factors and other DNA-associated proteins. We present a web service, Nebula, which allows inexperienced users to perform a complete bioinformatics analysis of ChIP-seq data. Nebula was designed for both bioinformaticians and biologists. It is based on the Galaxy open source framework. Galaxy already includes a large number of functionalities for mapping reads and peak calling. We added the following to Galaxy: (i) peak calling with FindPeaks and a module for immunoprecipitation quality control, (ii) de novo motif discovery with ChIPMunk, (iii) calculation of the density and the cumulative distribution of peak locations relative to gene transcription start sites, (iv) annotation of peaks with genomic features and (v) annotation of genes with peak information. Nebula generates the graphs and the enrichment statistics at each step of the process. During Steps 3-5, Nebula optionally repeats the analysis on a control dataset and compares these results with those from the main dataset. Nebula can also incorporate gene expression (or gene modulation) data during these steps. In summary, Nebula is an innovative web service that provides an advanced ChIP-seq analysis pipeline providing ready-to-publish results. Nebula is available at http://nebula.curie.fr/ Supplementary data are available at Bioinformatics online.

The presence of a perseverative iterative style in poor vs. good sleepers.

PubMed

Barclay, N L; Gregory, A M

2010-03-01

Catastrophizing is present in worriers and poor sleepers. This study investigates whether poor sleepers possess a 'perseverative iterative style' which predisposes them to catastrophize any topic, regardless of content or affective valence, a style previously found to occur more commonly in worriers as compared to others. Poor (n=23) and good sleepers (n=37) were distinguished using the Pittsburgh Sleep Quality Index (PSQI), from a sample of adults in the general population. Participants were required to catastrophize 2 topics: worries about sleep, and a current personal worry; and to iterate the positive aspects of a hypothetical topic. Poor sleepers catastrophized/iterated more steps to a greater extent than good sleepers to these three interviews, (F(1, 58)=7.35, p<.05). However, after controlling for anxiety and worry, this effect was reduced to non-significance for the 'sleep' and 'worry' topics, suggesting that anxiety may mediate some of the association between catastrophizing and sleep. However there was still a tendency for poor sleepers to iterate more steps to the 'hypothetical' topic, after controlling for anxiety and worry, which also suggests that poor sleepers possess a cognitive style which may predispose them to continue iterating consecutive steps to open-ended tasks regardless of anxiety and worry. Future research should examine whether the presence of this cognitive style is significant in leading to or maintaining insomnia.

Government, politics and health policy: A quantitative analysis of 30 European countries.

PubMed

Mackenbach, Johan P; McKee, Martin

2015-10-01

Public health policies are often dependent on political decision-making, but little is known of the impact of different forms of government on countries' health policies. In this exploratory study we studied the association between a wide range of process and outcome indicators of health policy and four groups of political factors (levels of democracy, e.g. voice and accountability; political representation, e.g. voter turnout; distribution of power, e.g. constraints on the executive; and quality of government, e.g. absence of corruption) in contemporary Europe. Data on 15 aspects of government and 18 indicators of health policy as well as on potential confounders were extracted from harmonized international data sources, covering 30 European countries and the years 1990-2010. In a first step, multivariate regression analysis was used to relate cumulative measures of government to indicators of health policy, and in a second step panel regression with country fixed effects was used to relate changes in selected measures of government to changes in indicators of health policy. In multivariate regression analyses, measures of quality of democracy and quality of government had many positive associations with process and outcome indicators of health policy, while measures of distribution of power and political representation had few and inconsistent associations. Associations for quality of democracy were robust against more extensive control for confounding variables, including tests in panel regressions with country fixed effects, but associations for quality of government were not. In this period in Europe, the predominant political influence on health policy has been the rise of levels of democracy in countries in the Central & Eastern part of the region. In contrast to other areas of public policy, health policy does not appear to be strongly influenced by institutional features of democracy determining the distribution of power, nor by aspects of political representation. The effect of quality of government on health policy warrants more study. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Economic analysis of temperature-controlled laminar airflow (TLA) for the treatment of patients with severe persistent allergic asthma.

PubMed

Brazier, Peter; Schauer, Uwe; Hamelmann, Eckard; Holmes, Steve; Pritchard, Clive; Warner, John O

2016-01-01

Chronic asthma is a significant burden for individual sufferers, adversely impacting their quality of working and social life, as well as being a major cost to the National Health Service (NHS). Temperature-controlled laminar airflow (TLA) therapy provides asthma patients at BTS/SIGN step 4/5 an add-on treatment option that is non-invasive and has been shown in clinical studies to improve quality of life for patients with poorly controlled allergic asthma. The objective of this study was to quantify the cost-effectiveness of TLA (Airsonett AB) technology as an add-on to standard asthma management drug therapy in the UK. The main performance measure of interest is the incremental cost per quality-adjusted life year (QALY) for patients using TLA in addition to usual care versus usual care alone. The incremental cost of TLA use is based on an observational clinical study monitoring the incidence of exacerbations with treatment valued using NHS cost data. The clinical effectiveness, used to derive the incremental QALY data, is based on a randomised double-blind placebo-controlled clinical trial comprising participants with an equivalent asthma condition. For a clinical cohort of asthma patients as a whole, the incremental cost-effectiveness ratio (ICER) is £8998 per QALY gained, that is, within the £20 000/QALY cost-effectiveness benchmark used by the National Institute for Health and Care Excellence (NICE). Sensitivity analysis indicates that ICER values range from £18 883/QALY for the least severe patients through to TLA being dominant, that is, cost saving as well as improving quality of life, for individuals with the most severe and poorly controlled asthma. Based on our results, Airsonett TLA is a cost-effective addition to treatment options for stage 4/5 patients. For high-risk individuals with more severe and less well controlled asthma, the use of TLA therapy to reduce incidence of hospitalisation would be a cost saving to the NHS.

The Use of Lean Six Sigma Methodology in Increasing Capacity of a Chemical Production Facility at DSM.

PubMed

Meeuwse, Marco

2018-03-30

Lean Six Sigma is an improvement method, combining Lean, which focuses on removing 'waste' from a process, with Six Sigma, which is a data-driven approach, making use of statistical tools. Traditionally it is used to improve the quality of products (reducing defects), or processes (reducing variability). However, it can also be used as a tool to increase the productivity or capacity of a production plant. The Lean Six Sigma methodology is therefore an important pillar of continuous improvement within DSM. In the example shown here a multistep batch process is improved, by analyzing the duration of the relevant process steps, and optimizing the procedures. Process steps were performed in parallel instead of sequential, and some steps were made shorter. The variability was reduced, giving the opportunity to make a tighter planning, and thereby reducing waiting times. Without any investment in new equipment or technical modifications, the productivity of the plant was improved by more than 20%; only by changing procedures and the programming of the process control system.

Diffraction Techniques in Structural Biology

PubMed Central

Egli, Martin

2010-01-01

A detailed understanding of chemical and biological function and the mechanisms underlying the activities ultimately requires atomic-resolution structural data. Diffraction-based techniques such as single-crystal X-ray crystallography, electron microscopy and neutron diffraction are well established and have paved the road to the stunning successes of modern-day structural biology. The major advances achieved in the last 20 years in all aspects of structural research, including sample preparation, crystallization, the construction of synchrotron and spallation sources, phasing approaches and high-speed computing and visualization, now provide specialists and non-specialists alike with a steady flow of molecular images of unprecedented detail. The present chapter combines a general overview of diffraction methods with a step-by-step description of the process of a single-crystal X-ray structure determination experiment, from chemical synthesis or expression to phasing and refinement, analysis and quality control. For novices it may serve as a stepping-stone to more in-depth treatises of the individual topics. Readers relying on structural information for interpreting functional data may find it a useful consumer guide. PMID:20517991

Synthesis of Ultrathin Si Nanosheets from Natural Clays for Lithium-Ion Battery Anodes.

PubMed

Ryu, Jaegeon; Hong, Dongki; Choi, Sinho; Park, Soojin

2016-02-23

Two-dimensional Si nanosheets have been studied as a promising candidate for lithium-ion battery anode materials. However, Si nanosheets reported so far showed poor cycling performances and required further improvements. In this work, we utilize inexpensive natural clays for preparing high quality Si nanosheets via a one-step simultaneous molten salt-induced exfoliation and chemical reduction process. This approach produces high purity mesoporous Si nanosheets in high yield. As a control experiment, two-step process (pre-exfoliated silicate sheets and subsequent chemical reduction) cannot sustain their original two-dimensional structure. In contrast, one-step method results in a production of 5 nm-thick highly porous Si nanosheets. Carbon-coated Si nanosheet anodes exhibit a high reversible capacity of 865 mAh g(-1) at 1.0 A g(-1) with an outstanding capacity retention of 92.3% after 500 cycles. It also delivers high rate capability, corresponding to a capacity of 60% at 20 A g(-1) compared to that of 2.0 A g(-1). Furthermore, the Si nanosheet electrodes show volume expansion of only 42% after 200 cycles.

Control Circuit For Two Stepping Motors

NASA Technical Reports Server (NTRS)

Ratliff, Roger; Rehmann, Kenneth; Backus, Charles

1990-01-01

Control circuit operates two independent stepping motors, one at a time. Provides following operating features: After selected motor stepped to chosen position, power turned off to reduce dissipation; Includes two up/down counters that remember at which one of eight steps each motor set. For selected motor, step indicated by illumination of one of eight light-emitting diodes (LED's) in ring; Selected motor advanced one step at time or repeatedly at rate controlled; Motor current - 30 mA at 90 degree positions, 60 mA at 45 degree positions - indicated by high or low intensity of LED that serves as motor-current monitor; Power-on reset feature provides trouble-free starts; To maintain synchronism between control circuit and motors, stepping of counters inhibited when motor power turned off.

Fabrication of sapphire-based high performance step-edge HTS Josephson junctions and SQUIDs and their application to scanning SQUID microscopy

NASA Astrophysics Data System (ADS)

Ming, Bin

Josephson junctions are at the heart of any superconductor device applications. A SQUID (Superconducting Quantum Interference Device), which consists of two Josephson junctions, is by far the most important example. Unfortunately, in the case of high-Tc superconductors (HTS), the quest for a robust, flexible, and high performance junction technology is yet far from the end. Currently, the only proven method to make HTS junctions is the SrTiO3(STO)-based bicrystal technology. In this thesis we concentrate on the fabrication of YBCO step-edge junctions and SQUIDs on sapphire. The step-edge method provides complete control of device locations and facilitates sophisticated, high-density layout. We select CeO2 as the buffer layer, as the key step to make device quality YBCO thin films on sapphire. With an "overhang" shadow mask produced by a novel photolithography technique, a steep step edge was fabricated on the CeO2 buffer layer by Ar+ ion milling with optimized parameters for minimum ion beam divergence. The step angle was determined to be in excess of 80° by atomic force microscopy (AFM). Josephson junctions patterned from those step edges exhibited resistively shunted junction (RSJ) like current-voltage characteristics. IcR n values in the 200--500 mV range were measured at 77K. Shapiro steps were observed under microwave irradiation, reflecting the true Josephson nature of those junctions. The magnetic field dependence of the junction Ic indicates a uniform current distribution. These results suggest that all fabrication processes are well controlled and the step edge is relatively straight and free of microstructural defects. The SQUIDs made from the same process exhibit large voltage modulation in a varying magnetic field. At 77K, our sapphire-based step-edge SQUID has a low white noise level at 3muphi0/ Hz , as compared to typically >10muphi0/ Hz from the best bicrystal STO SQUIDS. Our effort at device fabrication is chiefly motivated by the scanning SQUID microscopy (SSM) application. A scanning SQUID microscope is a non-contact, non-destructive imaging tool that can resolve weak currents beneath the sample surface by detecting their magnetic fields. Our low-noise sapphire-based step-edge SQUIDs should be particularly suitable for such an application. An earlier effort to make SNS trench junctions using focused ion beam (FIB) is reviewed in a separate chapter. (Abstract shortened by UMI.)

[Contemplation on the application of big data in clinical medicine].

PubMed

Lian, Lei

2015-01-01

Medicine is another area where big data is being used. The link between clinical treatment and outcome is the key step when applying big data in medicine. In the era of big data, it is critical to collect complete outcome data. Patient follow-up, comprehensive integration of data resources, quality control and standardized data management are the predominant approaches to avoid missing data and data island. Therefore, establishment of systemic patients follow-up protocol and prospective data management strategy are the important aspects of big data in medicine.

Materials and manufacturing processes for increased life/reliability. [of turbine wheels

NASA Technical Reports Server (NTRS)

Duttweiler, R. E.

1977-01-01

Improvements in both quality and durability of disk raw material for both military and commercial engines necessitated an entirely new concept in raw material process control which imposes careful selection, screening and sampling of the basic alloy ingredients, followed by careful monitoring of the melting parameters in all phases of the vacuum melting sequence. Special care is taken to preclude solidification conditions that produce adverse levels of segregation. Melt furnaces are routinely cleaned and inspected for contamination. Ingots are also cleaned and inspected before entering the final melt step.

Boron Nitride Nanotubes: Recent Advances in Their Synthesis, Functionalization, and Applications.

PubMed

Lee, Chee Huei; Bhandari, Shiva; Tiwari, Bishnu; Yapici, Nazmiye; Zhang, Dongyan; Yap, Yoke Khin

2016-07-15

A comprehensive overview of current research progress on boron nitride nanotubes (BNNTs) is presented in this article. Particularly, recent advancements in controlled synthesis and large-scale production of BNNTs will first be summarized. While recent success in mass production of BNNTs has opened up new opportunities to implement the appealing properties in various applications, concerns about product purity and quality still remain. Secondly, we will summarize the progress in functionalization of BNNTs, which is the necessary step for their applications. Additionally, selected potential applications in structural composites and biomedicine will be highlighted.

Model Checking Verification and Validation at JPL and the NASA Fairmont IV and V Facility

NASA Technical Reports Server (NTRS)

Schneider, Frank; Easterbrook, Steve; Callahan, Jack; Montgomery, Todd

1999-01-01

We show how a technology transfer effort was carried out. The successful use of model checking on a pilot JPL flight project demonstrates the usefulness and the efficacy of the approach. The pilot project was used to model a complex spacecraft controller. Software design and implementation validation were carried out successfully. To suggest future applications we also show how the implementation validation step can be automated. The effort was followed by the formal introduction of the modeling technique as a part of the JPL Quality Assurance process.

Systematic review of quantitative clinical gait analysis in patients with dementia.

PubMed

van Iersel, M B; Hoefsloot, W; Munneke, M; Bloem, B R; Olde Rikkert, M G M

2004-02-01

Diminished mobility often accompanies dementia and has a great impact on independence and quality of life. New treatment strategies for dementia are emerging, but the effects on gait remains to be studied objectively. In this review we address the general effects of dementia on gait as revealed by quantitative gait analysis. A systematic literature search with the (MESH) terms: 'dementia' and 'gait disorders' in Medline, CC, Psychlit and CinaHL between 1980-2002. Main inclusion criteria: controlled studies; patients with dementia; quantitative gait data. Seven publications met the inclusion criteria. All compared gait in Alzheimer's Disease (AD) with healthy elderly controls; one also assessed gait in Vascular Dementia (VaD). The methodology used was inconsistent and often had many shortcomings. However, there were several consistent findings: walking velocity decreased in dementia compared to healthy controls and decreased further with progressing severity of dementia. VaD was associated with a significant decrease in walking velocity compared to AD subjects. Dementia was associated with a shortened step length, an increased double support time and step to step variability. Gait in dementia is hardly analyzed in a well-designed manner. Despite this, the literature suggests that quantitative gait analysis can be sufficiently reliable and responsive to measure decline in walking velocity between subjects with and without dementia. More research is required to assess, both on an individual and a group level, how the minimal clinically relevant changes in gait in elderly demented patients should be defined and what would be the most responsive method to measure these changes.

Protein Kinase A Regulates Molecular Chaperone Transcription and Protein Aggregation

PubMed Central

Prince, Thomas; Calderwood, Stuart K.

2011-01-01

Heat shock factor 1 (HSF1) regulates one of the major pathways of protein quality control and is essential for deterrence of protein-folding disorders, particularly in neuronal cells. However, HSF1 activity declines with age, a change that may open the door to progression of neurodegenerative disorders such as Huntington's disease. We have investigated mechanisms of HSF1 regulation that may become compromised with age. HSF1 binds stably to the catalytic domain of protein kinase A (PKAcα) and becomes phosphorylated on at least one regulatory serine residue (S320). We show here that PKA is essential for effective transcription of HSP genes by HSF1. PKA triggers a cascade involving HSF1 binding to the histone acetylase p300 and positive translation elongation factor 1 (p-TEFb) and phosphorylation of the c-terminal domain of RNA polymerase II, a key mechanism in the downstream steps of HSF1-mediated transcription. This cascade appears to play a key role in protein quality control in neuronal cells expressing aggregation-prone proteins with long poly-glutamine (poly-Q) tracts. Such proteins formed inclusion bodies that could be resolved by HSF1 activation during heat shock. Resolution of the inclusions was inhibited by knockdown of HSF1, PKAcα, or the pTEFb component CDK9, indicating a key role for the HSF1-PKA cascade in protein quality control. PMID:22216146

Effects of acetic acid and hydrogen peroxide application during defeathering on the microbiological quality of broiler carcasses prior to evisceration.

PubMed

Dickens, J A; Whittemore, A D

1997-04-01

The microbiological quality and skin appearance of New York dressed broiler carcasses were determined in two separate experiments after a water control, acetic acid, or H2O2 spray during defeathering. Broilers were picked up from a local processor and transported in coops to the pilot facility. In both experiments, commercial processing parameters were followed up to the defeathering step. After feather removal, the vents of all carcasses were blocked with a cotton plug to prevent contamination of the whole carcass rinse diluent with fecal material from the lower gut. The neck and feet were removed, and the carcasses were placed in individual plastic bags in preparation for a whole carcass rinse. Results showed a statistically significant reduction (P < 0.05) in the log10 total aerobic plate counts for carcasses treated with 1% acetic acid in comparison to the water control (log10 cfu counts = 3.93 and 4.53, respectively). No differences were observed in skin appearance due to the 1% acid treatment. The addition of 0.5, 1, or 1.5% H2O2 to spray waters had no effect on microbiological quality of the carcasses when compared to the water control (4.92, 5.01, 4.91, and 4.99 log10 counts, respectively). The skin of carcasses treated with hydrogen peroxide, regardless of the concentration was bleached and bloated.

The Association Between Visual Assessment of Quality of Movement and Three-Dimensional Analysis of Pelvis, Hip, and Knee Kinematics During a Lateral Step Down Test.

PubMed

Rabin, Alon; Portnoy, Sigal; Kozol, Zvi

2016-11-01

Rabin, A, Portnoy, S, and Kozol, Z. The association between visual assessment of quality of movement and three-dimensional analysis of pelvis, hip, and knee kinematics during a lateral step down test. J Strength Cond Res 30(11): 3204-3211, 2016-Altered movement patterns including contralateral pelvic drop, increased hip adduction, knee abduction, and external rotation have been previously implicated in several lower extremity pathologies. Although various methods exist for assessing movement patterns, real-time visual observation is the most readily available method. The purpose of this study was to determine whether differing visual ratings of trunk, pelvis, and knee alignment, as well as overall quality of movement, are associated with differences in 3-dimensional trunk, pelvis, hip, or knee kinematics during a lateral step down test. Trunk, pelvis, and knee alignment of 30 healthy participants performing the lateral step down were visually rated as "good" or "faulty" based on previously established criteria. An additional categorization of overall quality of movement as either good or moderate was performed based on the aggregate score of each individual rating criterion. Three-dimensional motion analysis of trunk, pelvis, hip, and knee kinematics was simultaneously performed. A faulty pelvis alignment displayed a greater peak contralateral pelvic drop (effect size [ES], 1.65; p < 0.01) and a greater peak hip adduction (ES: 1.04, p = 0.01) compared with participants with a good pelvis alignment. Participants with a faulty knee alignment displayed greater peak knee external rotation compared with participants with a good knee alignment (ES, 0.78; p = 0.02). Participants with an overall moderate quality of movement displayed increased peak contralateral pelvic drop (ES, 1.07; p = 0.01) and peak knee external rotation (ES, 0.72; p = 0.04) compared with those with an overall good quality of movement. Visual rating of quality of movement during a lateral step down test, as performed by an experienced physical therapist, is associated with differences in several kinematics previously implicated in various pathologies.

Fostering supportive learning environments in long-term care: the case of WIN A STEP UP.

PubMed

Craft Morgan, Jennifer; Haviland, Sara B; Woodside, M Allyson; Konrad, Thomas R

2007-01-01

The education of direct care workers (DCWs) is key to improving job quality and the quality of care in long-term care (LTC). This paper describes the successful integration of a supervisory training program into a continuing education intervention (WIN A STEP UP) for DCWs, identifies the factors that appear to influence the integration of the learning into practice, and discusses the implications for educators. The WIN A STEP UP program achieved its strongest results when the DCW curriculum was paired with Coaching Supervision. Attention to pre-training, training and post-training conditions is necessary to successfully integrate learning into practice in LTC.

Methodological quality of randomised controlled trials in burns care. A systematic review.

PubMed

Danilla, Stefan; Wasiak, Jason; Searle, Susana; Arriagada, Cristian; Pedreros, Cesar; Cleland, Heather; Spinks, Anneliese

2009-11-01

To evaluate the methodological quality of published randomised controlled trials (RCTs) in burn care treatment and management. Using a predetermined search strategy we searched Ovid MEDLINE (1950 to January 2008) database to identify all English RCTs related to burn care. Full text studies identified were reviewed for key demographic and methodological characteristics. Methodological trial quality was assessed using the Jadad scale. A total of 257 studies involving 14,535 patients met the inclusion criteria. The median Jadad score was 2 (out of a best possible score of 5). Information was given in the introduction and discussion sections of most RCTs, although insufficient detail was provided on randomisation, allocation concealment, and blinding. The number of RCTs increased between 1950 and 2008 (Spearman's rho=0.6129, P<0.001), although the reporting quality did not improve over the same time period (P=0.1896) and was better in RCTs with larger sample sizes (median Jadad score, 4 vs. 2 points, P<0.0001). Methodological quality did not correlate with journal impact factor (P=0.2371). The reporting standards of RCTs are highly variable and less than optimal in most cases. The advent of evidence-based medicine heralds a new approach to burns care and systematic steps are needed to improve the quality of RCTs in this field. Identifying and reviewing the existing number of RCTs not only highlights the need for burn clinicians to conduct more trials, but may also encourage burn health clinicians to consider the importance of conducting trials that follow appropriate, evidence-based standards.

Mushroom-free selective epitaxial growth of Si, SiGe and SiGe:B raised sources and drains

NASA Astrophysics Data System (ADS)

Hartmann, J. M.; Benevent, V.; Barnes, J. P.; Veillerot, M.; Lafond, D.; Damlencourt, J. F.; Morvan, S.; Prévitali, B.; Andrieu, F.; Loubet, N.; Dutartre, D.

2013-05-01

We have evaluated various Cyclic Selective Epitaxial Growth/Etch (CSEGE) processes in order to grow "mushroom-free" Si and SiGe:B Raised Sources and Drains (RSDs) on each side of ultra-short gate length Extra-Thin Silicon-On-Insulator (ET-SOI) transistors. The 750 °C, 20 Torr Si CSEGE process we have developed (5 chlorinated growth steps with four HCl etch steps in-between) yielded excellent crystalline quality, typically 18 nm thick Si RSDs. Growth was conformal along the Si3N4 sidewall spacers, without any poly-Si mushrooms on top of unprotected gates. We have then evaluated on blanket 300 mm Si(001) wafers the feasibility of a 650 °C, 20 Torr SiGe:B CSEGE process (5 chlorinated growth steps with four HCl etch steps in-between, as for Si). As expected, the deposited thickness decreased as the total HCl etch time increased. This came hands in hands with unforeseen (i) decrease of the mean Ge concentration (from 30% down to 26%) and (ii) increase of the substitutional B concentration (from 2 × 1020 cm-3 up to 3 × 1020 cm-3). They were due to fluctuations of the Ge concentration and of the atomic B concentration [B] in such layers (drop of the Ge% and increase of [B] at etch step locations). Such blanket layers were a bit rougher than layers grown using a single epitaxy step, but nevertheless of excellent crystalline quality. Transposition of our CSEGE process on patterned ET-SOI wafers did not yield the expected results. HCl etch steps indeed helped in partly or totally removing the poly-SiGe:B mushrooms on top of the gates. This was however at the expense of the crystalline quality and 2D nature of the ˜45 nm thick Si0.7Ge0.3:B recessed sources and drains selectively grown on each side of the imperfectly protected poly-Si gates. The only solution we have so far identified that yields a lesser amount of mushrooms while preserving the quality of the S/D is to increase the HCl flow during growth steps.

Testing a stepped care model for binge-eating disorder: a two-step randomized controlled trial.

PubMed

Tasca, Giorgio A; Koszycki, Diana; Brugnera, Agostino; Chyurlia, Livia; Hammond, Nicole; Francis, Kylie; Ritchie, Kerri; Ivanova, Iryna; Proulx, Genevieve; Wilson, Brian; Beaulac, Julie; Bissada, Hany; Beasley, Erin; Mcquaid, Nancy; Grenon, Renee; Fortin-Langelier, Benjamin; Compare, Angelo; Balfour, Louise

2018-05-24

A stepped care approach involves patients first receiving low-intensity treatment followed by higher intensity treatment. This two-step randomized controlled trial investigated the efficacy of a sequential stepped care approach for the psychological treatment of binge-eating disorder (BED). In the first step, all participants with BED (n = 135) received unguided self-help (USH) based on a cognitive-behavioral therapy model. In the second step, participants who remained in the trial were randomized either to 16 weeks of group psychodynamic-interpersonal psychotherapy (GPIP) (n = 39) or to a no-treatment control condition (n = 46). Outcomes were assessed for USH in step 1, and then for step 2 up to 6-months post-treatment using multilevel regression slope discontinuity models. In the first step, USH resulted in large and statistically significant reductions in the frequency of binge eating. Statistically significant moderate to large reductions in eating disorder cognitions were also noted. In the second step, there was no difference in change in frequency of binge eating between GPIP and the control condition. Compared with controls, GPIP resulted in significant and large improvement in attachment avoidance and interpersonal problems. The findings indicated that a second step of a stepped care approach did not significantly reduce binge-eating symptoms beyond the effects of USH alone. The study provided some evidence for the second step potentially to reduce factors known to maintain binge eating in the long run, such as attachment avoidance and interpersonal problems.

Critical to quality in telemedicine service management: application of DFSS (Design for Six Sigma) and SERVQUAL).

PubMed

Yun, Eun Kyoung; Chun, Kee Moon

2008-01-01

Telemedicine generally refers to the use of communications and information technologies for the delivery of health care. owever, telemedicine is not merely a simple combination of health care and technology. The researchers propose a systematic approach for assessing needs of telemedicine customers, called critical-to-quality (CTQ) in Six Sigma, with a purpose of continuous quality improvement. The combination approach using DFSS (Design for Six Sigma) and SERVQUAL (Service Quality Framework) was applied to define the critical quality attributes of telemedicine service management and to match them with the current telemedicine process. With a step-by-step procedure, telemedicine service process was reviewed and all the important CTQ candidates identified via a case study. The findings suggest that nurses need further understanding and research methods that will improve and manage the quality of health care service in various medical fields.

HACCP (Hazard Analysis and Critical Control Points) to guarantee safe water reuse and drinking water production--a case study.

PubMed

Dewettinck, T; Van Houtte, E; Geenens, D; Van Hege, K; Verstraete, W

2001-01-01

To obtain a sustainable water catchment in the dune area of the Flemish west coast, the integration of treated domestic wastewater in the existing potable water production process is planned. The hygienic hazards associated with the introduction of treated domestic wastewater into the water cycle are well recognised. Therefore, the concept of HACCP (Hazard Analysis and Critical Control Points) was used to guarantee hygienically safe drinking water production. Taking into account the literature data on the removal efficiencies of the proposed advanced treatment steps with regard to enteric viruses and protozoa and after setting high quality limits based on the recent progress in quantitative risk assessment, the critical control points (CCPs) and points of attention (POAs) were identified. Based on the HACCP analysis a specific monitoring strategy was developed which focused on the control of these CCPs and POAs.

Comparability of automated human induced pluripotent stem cell culture: a pilot study.

PubMed

Archibald, Peter R T; Chandra, Amit; Thomas, Dave; Chose, Olivier; Massouridès, Emmanuelle; Laâbi, Yacine; Williams, David J

2016-12-01

Consistent and robust manufacturing is essential for the translation of cell therapies, and the utilisation automation throughout the manufacturing process may allow for improvements in quality control, scalability, reproducibility and economics of the process. The aim of this study was to measure and establish the comparability between alternative process steps for the culture of hiPSCs. Consequently, the effects of manual centrifugation and automated non-centrifugation process steps, performed using TAP Biosystems' CompacT SelecT automated cell culture platform, upon the culture of a human induced pluripotent stem cell (hiPSC) line (VAX001024c07) were compared. This study, has demonstrated that comparable morphologies and cell diameters were observed in hiPSCs cultured using either manual or automated process steps. However, non-centrifugation hiPSC populations exhibited greater cell yields, greater aggregate rates, increased pluripotency marker expression, and decreased differentiation marker expression compared to centrifugation hiPSCs. A trend for decreased variability in cell yield was also observed after the utilisation of the automated process step. This study also highlights the detrimental effect of the cryopreservation and thawing processes upon the growth and characteristics of hiPSC cultures, and demonstrates that automated hiPSC manufacturing protocols can be successfully transferred between independent laboratories.

Synthesis of walking sounds for alleviating gait disturbances in Parkinson's disease.

PubMed

Rodger, Matthew W M; Young, William R; Craig, Cathy M

2014-05-01

Managing gait disturbances in people with Parkinson's disease is a pressing challenge, as symptoms can contribute to injury and morbidity through an increased risk of falls. While drug-based interventions have limited efficacy in alleviating gait impairments, certain nonpharmacological methods, such as cueing, can also induce transient improvements to gait. The approach adopted here is to use computationally-generated sounds to help guide and improve walking actions. The first method described uses recordings of force data taken from the steps of a healthy adult which in turn were used to synthesize realistic gravel-footstep sounds that represented different spatio-temporal parameters of gait, such as step duration and step length. The second method described involves a novel method of sonifying, in real time, the swing phase of gait using real-time motion-capture data to control a sound synthesis engine. Both approaches explore how simple but rich auditory representations of action based events can be used by people with Parkinson's to guide and improve the quality of their walking, reducing the risk of falls and injury. Studies with Parkinson's disease patients are reported which show positive results for both techniques in reducing step length variability. Potential future directions for how these sound approaches can be used to manage gait disturbances in Parkinson's are also discussed.

Development of risk-based air quality management strategies under impacts of climate change.

PubMed

Liao, Kuo-Jen; Amar, Praveen; Tagaris, Efthimios; Russell, Armistead G

2012-05-01

Climate change is forecast to adversely affect air quality through perturbations in meteorological conditions, photochemical reactions, and precursor emissions. To protect the environment and human health from air pollution, there is an increasing recognition of the necessity of developing effective air quality management strategies under the impacts of climate change. This paper presents a framework for developing risk-based air quality management strategies that can help policy makers improve their decision-making processes in response to current and future climate change about 30-50 years from now. Development of air quality management strategies under the impacts of climate change is fundamentally a risk assessment and risk management process involving four steps: (1) assessment of the impacts of climate change and associated uncertainties; (2) determination of air quality targets; (3) selections of potential air quality management options; and (4) identification of preferred air quality management strategies that minimize control costs, maximize benefits, or limit the adverse effects of climate change on air quality when considering the scarcity of resources. The main challenge relates to the level of uncertainties associated with climate change forecasts and advancements in future control measures, since they will significantly affect the risk assessment results and development of effective air quality management plans. The concept presented in this paper can help decision makers make appropriate responses to climate change, since it provides an integrated approach for climate risk assessment and management when developing air quality management strategies. Development of climate-responsive air quality management strategies is fundamentally a risk assessment and risk management process. The risk assessment process includes quantification of climate change impacts on air quality and associated uncertainties. Risk management for air quality under the impacts of climate change includes determination of air quality targets, selections of potential management options, and identification of effective air quality management strategies through decision-making models. The risk-based decision-making framework can also be applied to develop climate-responsive management strategies for the other environmental dimensions and assess costs and benefits of future environmental management policies.

SNPflow: A Lightweight Application for the Processing, Storing and Automatic Quality Checking of Genotyping Assays

PubMed Central

Schönherr, Sebastian; Neuner, Mathias; Forer, Lukas; Specht, Günther; Kloss-Brandstätter, Anita; Kronenberg, Florian; Coassin, Stefan

2013-01-01

Single nucleotide polymorphisms (SNPs) play a prominent role in modern genetics. Current genotyping technologies such as Sequenom iPLEX, ABI TaqMan and KBioscience KASPar made the genotyping of huge SNP sets in large populations straightforward and allow the generation of hundreds of thousands of genotypes even in medium sized labs. While data generation is straightforward, the subsequent data conversion, storage and quality control steps are time-consuming, error-prone and require extensive bioinformatic support. In order to ease this tedious process, we developed SNPflow. SNPflow is a lightweight, intuitive and easily deployable application, which processes genotype data from Sequenom MassARRAY (iPLEX) and ABI 7900HT (TaqMan, KASPar) systems and is extendible to other genotyping methods as well. SNPflow automatically converts the raw output files to ready-to-use genotype lists, calculates all standard quality control values such as call rate, expected and real amount of replicates, minor allele frequency, absolute number of discordant replicates, discordance rate and the p-value of the HWE test, checks the plausibility of the observed genotype frequencies by comparing them to HapMap/1000-Genomes, provides a module for the processing of SNPs, which allow sex determination for DNA quality control purposes and, finally, stores all data in a relational database. SNPflow runs on all common operating systems and comes as both stand-alone version and multi-user version for laboratory-wide use. The software, a user manual, screenshots and a screencast illustrating the main features are available at http://genepi-snpflow.i-med.ac.at. PMID:23527209

EFFECT OF AN ADDITIONAL HYDROPHILIC VERSUS HYDROPHOBIC COAT ON THE QUALITY OF DENTINAL SEALING PROVIDED BY TWO-STEP ETCH-AND-RINSE ADHESIVES

PubMed Central

Silva, Safira Marques de Andrade; Carrilho, Marcela Rocha de Oliveira; Marquezini, Luiz; Garcia, Fernanda Cristina Pimentel; Manso, Adriana Pigozzo; Alves, Marcelo Corrêa; de Carvalho, Ricardo Marins

2009-01-01

Objective: To test the hypothesis that the quality of the dentinal sealing provided by two-step etch-and-rinse adhesives cannot be altered by the addition of an extra layer of the respective adhesive or the application of a more hydrophobic, non-solvated resin. Material and Methods: full-crown preparations were acid-etched with phosphoric acid for 15 s and bonded with Adper Single Bond (3M ESPE), Excite DSC (Ivoclar/Vivadent) or Prime & Bond NT (Dentsply). The adhesives were used according to the manufacturers' instructions (control groups) or after application to dentin they were a) covered with an extra coat of each respective system or b) coated with a non-solvated bonding agent (Adper Scotchbond Multi-Purpose Adhesive, 3M ESPE). Fluid flow rate was measured before and after dentin surfaces were acid-etched and bonded with adhesives. Results: None of the adhesives or experimental treatments was capable to block completely the fluid transudation across the treated dentin. Application of an extra coat of the adhesive did not reduce the fluid flow rate of adhesive-bonded dentin (p>0.05). Conversely, the application of a more hydrophobic non-solvated resin resulted in significant reductions in the fluid flow rate (p<0.05) for all tested adhesives. Conclusions: The quality of the dentinal sealing provided by etch-and-rinse adhesives can be significantly improved by the application of a more hydrophobic, non-solvated bonding agent. PMID:19466248

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Metal organic framework materials are used in many energy-efficient and green technologies. PNNL researchers may bring their commercial use a step closer to reality by developing a new way to create these materials in larger quantities, better qualities, and more quickly than ever before. This video is a step-by-step look at how our PNNL scientists create MOFs with 80% efficacy.

The Impact of Massage Therapy on Function in Pain Populations-A Systematic Review and Meta-Analysis of Randomized Controlled Trials: Part I, Patients Experiencing Pain in the General Population.

PubMed

Crawford, Cindy; Boyd, Courtney; Paat, Charmagne F; Price, Ashley; Xenakis, Lea; Yang, EunMee; Zhang, Weimin

2016-07-01

Pain is multi-dimensional and may be better addressed through a holistic, biopsychosocial approach. Massage therapy is commonly practiced among patients seeking pain management; however, its efficacy is unclear. This systematic review and meta-analysis is the first to rigorously assess the quality of massage therapy research and evidence for its efficacy in treating pain, function-related and health-related quality of life outcomes across all pain populations. Key databases were searched from inception through February 2014. Eligible randomized controlled trials were assessed for methodological quality using SIGN 50 Checklist. Meta-analysis was applied at the outcome level. A diverse steering committee interpreted the results to develop recommendations. Sixty high quality and seven low quality studies were included in the review. Results demonstrate massage therapy effectively treats pain compared to sham [standardized mean difference (SMD) = -.44], no treatment (SMD = -1.14), and active (SMD = -0.26) comparators. Compared to active comparators, massage therapy was also beneficial for treating anxiety (SMD = -0.57) and health-related quality of life (SMD = 0.14). Based on the evidence, massage therapy, compared to no treatment, should be strongly recommended as a pain management option. Massage therapy is weakly recommended for reducing pain, compared to other sham or active comparators, and improving mood and health-related quality of life, compared to other active comparators. Massage therapy safety, research challenges, how to address identified research gaps, and necessary next steps for implementing massage therapy as a viable pain management option are discussed.

The Impact of Massage Therapy on Function in Pain Populations—A Systematic Review and Meta-Analysis of Randomized Controlled Trials: Part I, Patients Experiencing Pain in the General Population

PubMed Central

Crawford, Cindy; Boyd, Courtney; Paat, Charmagne F; Price, Ashley; Xenakis, Lea; Yang, EunMee; Zhang, Weimin; Buckenmaier, Chester; Buckenmaier, Pamela; Cambron, Jerrilyn; Deery, Christopher; Schwartz, Jan; Werner, Ruth; Whitridge, Pete

2016-01-01

Abstract Purpose Pain is multi-dimensional and may be better addressed through a holistic, biopsychosocial approach. Massage therapy is commonly practiced among patients seeking pain management; however, its efficacy is unclear. This systematic review and meta-analysis is the first to rigorously assess the quality of massage therapy research and evidence for its efficacy in treating pain, function-related and health-related quality of life outcomes across all pain populations. Methods Key databases were searched from inception through February 2014. Eligible randomized controlled trials were assessed for methodological quality using SIGN 50 Checklist. Meta-analysis was applied at the outcome level. A diverse steering committee interpreted the results to develop recommendations. Results Sixty high quality and seven low quality studies were included in the review. Results demonstrate massage therapy effectively treats pain compared to sham [standardized mean difference (SMD) = −.44], no treatment (SMD = −1.14), and active (SMD = −0.26) comparators. Compared to active comparators, massage therapy was also beneficial for treating anxiety (SMD = −0.57) and health-related quality of life (SMD = 0.14). Conclusion Based on the evidence, massage therapy, compared to no treatment, should be strongly recommended as a pain management option. Massage therapy is weakly recommended for reducing pain, compared to other sham or active comparators, and improving mood and health-related quality of life, compared to other active comparators. Massage therapy safety, research challenges, how to address identified research gaps, and necessary next steps for implementing massage therapy as a viable pain management option are discussed. PMID:27165971

Feasibility of using continuous chromatography in downstream processing: Comparison of costs and product quality for a hybrid process vs. a conventional batch process.

PubMed

Ötes, Ozan; Flato, Hendrik; Winderl, Johannes; Hubbuch, Jürgen; Capito, Florian

2017-10-10

The protein A capture step is the main cost-driver in downstream processing, with high attrition costs especially when using protein A resin not until end of resin lifetime. Here we describe a feasibility study, transferring a batch downstream process to a hybrid process, aimed at replacing batch protein A capture chromatography with a continuous capture step, while leaving the polishing steps unchanged to minimize required process adaptations compared to a batch process. 35g of antibody were purified using the hybrid approach, resulting in comparable product quality and step yield compared to the batch process. Productivity for the protein A step could be increased up to 420%, reducing buffer amounts by 30-40% and showing robustness for at least 48h continuous run time. Additionally, to enable its potential application in a clinical trial manufacturing environment cost of goods were compared for the protein A step between hybrid process and batch process, showing a 300% cost reduction, depending on processed volumes and batch cycles. Copyright © 2017 Elsevier B.V. All rights reserved.

A perturbation-based balance training program for older adults: study protocol for a randomised controlled trial

PubMed Central

Mansfield, Avril; Peters, Amy L; Liu, Barbara A; Maki, Brian E

2007-01-01

Background Previous research investigating exercise as a means of falls prevention in older adults has shown mixed results. Lack of specificity of the intervention may be an important factor contributing to negative results. Change-in-support (CIS) balance reactions, which involve very rapid stepping or grasping movements of the limbs, play a critical role in preventing falls; hence, a training program that improves ability to execute effective CIS reactions could potentially have a profound effect in reducing risk of falling. This paper describes: 1) the development of a perturbation-based balance training program that targets specific previously-reported age-related impairments in CIS reactions, and 2) a study protocol to evaluate the efficacy of this new training program. Methods/Design The training program involves use of unpredictable, multi-directional moving-platform perturbations to evoke stepping and grasping reactions. Perturbation magnitude is gradually increased over the course of the 6-week program, and concurrent cognitive and movement tasks are included during later sessions. The program was developed in accordance with well-established principles of motor learning, such as individualisation, specificity, overload, adaptation-progression and variability. Specific goals are to reduce the frequency of multiple-step responses, reduce the frequency of collisions between the stepping foot and stance leg, and increase the speed of grasping reactions. A randomised control trial will be performed to evaluate the efficacy of the training program. A total of 30 community-dwelling older adults (age 64–80) with a recent history of instability or falling will be assigned to either the perturbation-based training or a control group (flexibility/relaxation training), using a stratified randomisation that controls for gender, age and baseline stepping/grasping performance. CIS reactions will be tested immediately before and after the six weeks of training, using platform perturbations as well as a distinctly different method of perturbation (waist pulls) in order to evaluate the generalisability of the training effects. Discussion This study will determine whether perturbation-based balance training can help to reverse specific age-related impairments in balance-recovery reactions. These results will help to guide the development of more effective falls prevention programs, which may ultimately lead to reduced health-care costs and enhanced mobility, independence and quality of life. PMID:17540020

A perturbation-based balance training program for older adults: study protocol for a randomised controlled trial.

PubMed

Mansfield, Avril; Peters, Amy L; Liu, Barbara A; Maki, Brian E

2007-05-31

Previous research investigating exercise as a means of falls prevention in older adults has shown mixed results. Lack of specificity of the intervention may be an important factor contributing to negative results. Change-in-support (CIS) balance reactions, which involve very rapid stepping or grasping movements of the limbs, play a critical role in preventing falls; hence, a training program that improves ability to execute effective CIS reactions could potentially have a profound effect in reducing risk of falling. This paper describes: 1) the development of a perturbation-based balance training program that targets specific previously-reported age-related impairments in CIS reactions, and 2) a study protocol to evaluate the efficacy of this new training program. The training program involves use of unpredictable, multi-directional moving-platform perturbations to evoke stepping and grasping reactions. Perturbation magnitude is gradually increased over the course of the 6-week program, and concurrent cognitive and movement tasks are included during later sessions. The program was developed in accordance with well-established principles of motor learning, such as individualisation, specificity, overload, adaptation-progression and variability. Specific goals are to reduce the frequency of multiple-step responses, reduce the frequency of collisions between the stepping foot and stance leg, and increase the speed of grasping reactions. A randomised control trial will be performed to evaluate the efficacy of the training program. A total of 30 community-dwelling older adults (age 64-80) with a recent history of instability or falling will be assigned to either the perturbation-based training or a control group (flexibility/relaxation training), using a stratified randomisation that controls for gender, age and baseline stepping/grasping performance. CIS reactions will be tested immediately before and after the six weeks of training, using platform perturbations as well as a distinctly different method of perturbation (waist pulls) in order to evaluate the generalisability of the training effects. This study will determine whether perturbation-based balance training can help to reverse specific age-related impairments in balance-recovery reactions. These results will help to guide the development of more effective falls prevention programs, which may ultimately lead to reduced health-care costs and enhanced mobility, independence and quality of life.

Studies on the finite element simulation in sheet metal stamping processes

NASA Astrophysics Data System (ADS)

Huang, Ying

The sheet metal stamping process plays an important role in modern industry. With the ever-increasing demand for shape complexity, product quality and new materials, the traditional trial and error method for setting up a sheet metal stamping process is no longer efficient. As a result, the Finite Element Modeling (FEM) method has now been widely used. From a physical point of view, the formability and the quality of a product are influenced by several factors. The design of the product in the initial stage and the motion of the press during the production stage are two of these crucial factors. This thesis focuses on the numerical simulation for these two factors using FEM. Currently, there are a number of commercial FEM software systems available in the market. These software systems are based on an incremental FEM process that models the sheet metal stamping process in small incremental steps. Even though the incremental FEM is accurate, it is not suitable for the initial conceptual design for its needing of detailed design parameters and enormous calculation times. As a result, another type of FEM, called the inverse FEM method or one-step FEM method, has been proposed. While it is less accurate than that of the incremental method, this method requires much less computation and hence, has a great potential. However, it also faces a number of unsolved problems, which limits its application. This motivates the presented research. After the review of the basic theory of the inverse method, a new modified arc-length search method is proposed to find better initial solution. The methods to deal with the vertical walls are also discussed and presented. Then, a generalized multi-step inverse FEM method is proposed. It solves two key obstacles: the first one is to determine the initial solution of the intermediate three-dimensional configurations and the other is to control the movement of nodes so they could only slide on constraint surfaces during the search by Newton-Raphson iteration. The computer implementation of the generalized multi-step inverse FEM is also presented. By comparing to the simulation results using a commercial software system, the effectiveness of the new method is validated. Other than the product design, the punch motion (including punch speed and punch trajectory) of the stamping press also has significant effect on the formability and the quality of the product. In fact, this is one of the major reasons why hydraulic presses and/or servo presses are used for parts which demand high quality. In order to reveal the quantitative correlation between the punch motion and the part quality, the Cowper-Symonds strain rate constitutive model and the implicit dynamic incremental FEM are combined to conduct the research. The effects of the punch motion on the part quality, especially the plastic strain distribution and the potential springback, have been investigated for the deep drawing and the bending processes respectively. A qualitative relationship between the punch motion and the part quality is also derived. The reaction force of the punch motion causes the dynamic deformation of the press during the stamping, which in turn influences the part quality as well. This dynamic information, in the form of the strain signal, is an important basis for the on-line monitoring of the part quality. By using the actual force as the input to the press, the incremental FEM is needed to predict the strain of the press. The result is validated by means of experiments and can be used to assist the on-line monitoring.

[Automatic system control and its application in dialysis].

PubMed

Santoro, A; Mancini, E; Ferramosca, E

2007-01-01

The progressive increase in the mean age of dialysis patients associated with increasing comorbidity factors such as the presence of cardiovascular disease and diabetes have significantly worsened patients' clinical status and tolerance to hemodialysis. On the other hand, the demand for short treatment times increases the risk of hemodynamic instability as well as inadequate depuration. The traditional management of the dialysis session by setting predefined treatment parameters and carrying out active therapeutic intervention only in the event of complications is definitely unsuitable for short-lasting treatments, which are often complicated by hemodynamic instability, especially in critically ill patients. The first step in improving the management of the dialysis session is the use of uninvasive systems for continuous monitoring of the hemodynamic and biochemical parameters that characterize dialysis quality. In the last decade, special sensors have been designed for continuous measurement of blood volume, blood temperature, blood pressure, heart rate and electrolytes. As a second step, some of these devices have been interfaced with the dialysis equipment, mainly with a view to preventing cardiocirculatory instability but also monitoring the efficiency of dialysis (biofeedback control systems). The basic components of a biofeedback system are the plant, the sensors, the actuators, and the controller. The plant is the biological process we need to control, while the sensors are the devices used for measuring the output variables. The actuators are the working arms of the controller. The controller is the mathematical model that continuously sets the measured output variable against the reference input and modifies the actuators in order to reduce any discrepancies. In actual practice, however, there are a number of conceptual, physical and technological difficulties to overcome. In particular, the behavior of what is to be controlled may be nonlinear and time-varying, with interactions between the actuators and the controlled variable. In such cases, more sophisticated control systems are needed that must be capable of identifying the behavior of the process and continuously update information data while the control is on. These complex systems are called adaptive controllers. At present, there are three biofeedback systems routinely used in clinical dialysis. All of them are aimed at improving the cardiovascular stability during hemodialysis, which at present is one of the main problems limiting the tolerance to treatment on the one hand and the quality of hemodialysis on the other. These systems include biofeedback control of blood volume, biofeedback control of thermal balance, and biofeedback control of blood pressure.

Biofeedback-driven dialysis: where are we?

PubMed

Santoro, Antonio; Ferramosca, Emiliana; Mancini, Elena

2008-01-01

The progressive increase in the mean age and the growing conditions of co-morbidity, especially of cardiovascular pathologies and diabetes, have significantly worsened the patients' clinical status and tolerance to the hemodialysis (HD) treatment. On the other hand, the demand for short treatment times enhances the risk for hemodynamic instability as well as for inadequate depuration. The traditional management of the dialysis session, setting of predefined treatment parameters, with active therapeutic interventions only in the event of complications, is definitely unsuitable for short-lasting treatments, often complicated by hemodynamic instability, especially in critical patients. The first step to improve the management of the dialysis session is the utilization of continuous and uninvasive monitoring systems for hemodynamic or biochemical parameters involved in the dialysis quality. Special sensors for the continuous measurement of blood volume, blood temperature, blood pressure, heart rate, electrolytes, have been realized throughout the last 10 years. As a second step, some of these devices have been implemented in the dialysis instrumentation, mainly with a view to preventing cardiocirculatory instability but also to control the dialysis efficiency (biofeedback control systems). The basic components of a biofeedback system are: the plant, the sensors, the actuators and the controller. The plant is the biological process that we need to control, while the sensors are the devices used for measuring the output variables. The actuators are the working arms of the controller. The controller is the mathematical model that continuously sets the measured output variable against the reference input and modifies the actuators in order to reduce any discrepancies. Yet, in practice there are a number of conceptual, physical and technological difficulties to be overcome. In particular, the behavior of what is to be controlled may be non-linear and time-varying, with interactions between the actuators and the controlled variable. In these cases, more sophisticated control systems are needed, which must be capable of identifying the behavior of the process, and continuously update information data while the control is on. These complex systems are called adaptive controllers. In dialysis, over the last few years, it has been relatively easy to realize some biofeedback systems since a series of sensors have been developed for online monitoring. Three biofeedback devices are routinely used with the aim of improving the cardiovascular instability, one of the main problems limiting the tolerance to treatment by the patient and the quality of HD in itself - the first is the biofeedback control of blood volume, the second is the biofeedback control of thermal balance, and the third is the biofeedback control of blood pressure.

Improving the effectiveness of psychotherapy in two public hospitals in Nairobi

PubMed Central

Falkenström, Fredrik; Gee, Matthew David; Kuria, Mary Wangari; Othieno, Caleb Joseph; Kumar, Manasi

2017-01-01

This paper is the first in a planned series of papers studying the effectiveness of psychotherapy and counselling in Nairobi. It describes a method for checking the effectiveness of psychotherapy and improving service quality in a Kenyan context. Rather than prematurely imposing psychotherapy protocols developed in Western countries in another cultural context, we believe that first studying psychological interventions as they are practised may generate understanding of which psychological problems are common, what interventions therapists use, and what seems to be effective in reducing psychiatric problems. The initial step is to assess outcome of psychological treatments as they are conducted. This is followed by statistical analyses aimed at identifying patient groups who are not improving at acceptable rates. Therapists will then be trained in a ‘best practice’ approach, and controlled trials are used in a final step, testing new interventions specifically targeted at patient groups with sub-optimal outcomes. PMID:29093948

Improving the effectiveness of psychotherapy in two public hospitals in Nairobi.

PubMed

Falkenström, Fredrik; Gee, Matthew David; Kuria, Mary Wangari; Othieno, Caleb Joseph; Kumar, Manasi

2017-08-01

This paper is the first in a planned series of papers studying the effectiveness of psychotherapy and counselling in Nairobi. It describes a method for checking the effectiveness of psychotherapy and improving service quality in a Kenyan context. Rather than prematurely imposing psychotherapy protocols developed in Western countries in another cultural context, we believe that first studying psychological interventions as they are practised may generate understanding of which psychological problems are common, what interventions therapists use, and what seems to be effective in reducing psychiatric problems. The initial step is to assess outcome of psychological treatments as they are conducted. This is followed by statistical analyses aimed at identifying patient groups who are not improving at acceptable rates. Therapists will then be trained in a 'best practice' approach, and controlled trials are used in a final step, testing new interventions specifically targeted at patient groups with sub-optimal outcomes.

Microlens fabrication by replica molding of frozen laser-printed droplets

NASA Astrophysics Data System (ADS)

Surdo, Salvatore; Diaspro, Alberto; Duocastella, Martí

2017-10-01

In this work, we synergistically combine laser-induced forward transfer (LIFT) and replica molding for the fabrication of microlenses with control of their geometry and size independent of the material or substrate used. Our approach is based on a multistep process in which liquid microdroplets of an aqueous solution are first printed on a substrate by LIFT. Following a freezing step, the microdroplets are used as a master to fabricate a polydimethylsiloxane (PDMS) mold. A subsequent replica molding step enables the creation of microlenses and microlens arrays on arbitrary selected substrates and by using different curable polymers. Thus, our method combines the rapid fabrication capabilities of LIFT and the perfectively smooth surface quality of the generated microdroplets, with the advantages of replica molding in terms of parallelization and materials flexibility. We demonstrate our strategy by generating microlenses of different photocurable polymers and by characterizing their optical and morphological properties.

ChIA-PET2: a versatile and flexible pipeline for ChIA-PET data analysis

PubMed Central

Li, Guipeng; Chen, Yang; Snyder, Michael P.; Zhang, Michael Q.

2017-01-01

ChIA-PET2 is a versatile and flexible pipeline for analyzing different types of ChIA-PET data from raw sequencing reads to chromatin loops. ChIA-PET2 integrates all steps required for ChIA-PET data analysis, including linker trimming, read alignment, duplicate removal, peak calling and chromatin loop calling. It supports different kinds of ChIA-PET data generated from different ChIA-PET protocols and also provides quality controls for different steps of ChIA-PET analysis. In addition, ChIA-PET2 can use phased genotype data to call allele-specific chromatin interactions. We applied ChIA-PET2 to different ChIA-PET datasets, demonstrating its significantly improved performance as well as its ability to easily process ChIA-PET raw data. ChIA-PET2 is available at https://github.com/GuipengLi/ChIA-PET2. PMID:27625391

Developing a quality by design approach to model tablet dissolution testing: an industrial case study.

PubMed

Yekpe, Ketsia; Abatzoglou, Nicolas; Bataille, Bernard; Gosselin, Ryan; Sharkawi, Tahmer; Simard, Jean-Sébastien; Cournoyer, Antoine

2018-07-01

This study applied the concept of Quality by Design (QbD) to tablet dissolution. Its goal was to propose a quality control strategy to model dissolution testing of solid oral dose products according to International Conference on Harmonization guidelines. The methodology involved the following three steps: (1) a risk analysis to identify the material- and process-related parameters impacting the critical quality attributes of dissolution testing, (2) an experimental design to evaluate the influence of design factors (attributes and parameters selected by risk analysis) on dissolution testing, and (3) an investigation of the relationship between design factors and dissolution profiles. Results show that (a) in the case studied, the two parameters impacting dissolution kinetics are active pharmaceutical ingredient particle size distributions and tablet hardness and (b) these two parameters could be monitored with PAT tools to predict dissolution profiles. Moreover, based on the results obtained, modeling dissolution is possible. The practicality and effectiveness of the QbD approach were demonstrated through this industrial case study. Implementing such an approach systematically in industrial pharmaceutical production would reduce the need for tablet dissolution testing.

HACCP-based quality risk management approach to udder health problems on dairy farms

PubMed Central

2009-01-01

Against the background of prevailing udder health problems on dairy farms, this paper discusses a new approach to mastitis control. Current udder health control programmes, such as the 'five-point plan', are highlighted and their drawbacks indicated. The concept and principles of hazard analysis critical control points (HACCP) are introduced. The eight core elements of this concept are dealt with by using the example of a dairy herd with a mastitis problem due to Staphylococcus aureus. The various steps to be taken in the development of a HACCP-based quality risk management programme are illustrated through the application of core elements. Finally, it is shown that the HACCP key words, structure, organisation, planning, communication and formalisation; which do not frequently appear in conventional herd health and production management programmes can contribute to better udder health. The role of the veterinarian can be paramount and of added value, if he/she is willing to invest in new knowledge and skills, such as the HACCP concept, farm economics, animal nutrition, and particularly the role of coach to the dairy farmer in the implementation of preventative measures in relation to udder health. PMID:22082372

HACCP-based quality risk management approach to udder health problems on dairy farms.

PubMed

Noordhuizen, Jptm; Cannas da Silva, J

2009-04-01

Against the background of prevailing udder health problems on dairy farms, this paper discusses a new approach to mastitis control. Current udder health control programmes, such as the 'five-point plan', are highlighted and their drawbacks indicated. The concept and principles of hazard analysis critical control points (HACCP) are introduced. The eight core elements of this concept are dealt with by using the example of a dairy herd with a mastitis problem due to Staphylococcus aureus. The various steps to be taken in the development of a HACCP-based quality risk management programme are illustrated through the application of core elements. Finally, it is shown that the HACCP key words, structure, organisation, planning, communication and formalisation; which do not frequently appear in conventional herd health and production management programmes can contribute to better udder health. The role of the veterinarian can be paramount and of added value, if he/she is willing to invest in new knowledge and skills, such as the HACCP concept, farm economics, animal nutrition, and particularly the role of coach to the dairy farmer in the implementation of preventative measures in relation to udder health.