15 CFR 922.142 - Prohibited or otherwise regulated activities.

Code of Federal Regulations, 2010 CFR

2010-01-01

... maximum extent practicable any advance impact on Sanctuary resources and qualities. Civil engineering and other civil works projects conducted by the U.S. Army Corps of Engineers are excluded from the scope of...

New tools for non-invasive exploration of collagen network in cartilaginous tissue-engineered substitute.

PubMed

Henrionnet, Christel; Dumas, Dominique; Hupont, Sébastien; Stoltz, Jean François; Mainard, Didier; Gillet, Pierre; Pinzano, Astrid

2017-01-01

In tissue engineering approaches, the quality of substitutes is a key element to determine its ability to treat cartilage defects. However, in clinical practice, the evaluation of tissue-engineered cartilage substitute quality is not possible due to the invasiveness of the standard procedure, which is to date histology. The aim of this work was to validate a new innovative system performed from two-photon excitation laser adapted to an optical macroscope to evaluate at macroscopic scale the collagen network in cartilage tissue-engineered substitutes in confrontation with gold standard histologic techniques or immunohistochemistry to visualize type II collagen. This system permitted to differentiate the quality of collagen network between ITS and TGF-β1 treatments. Multiscale large field imaging combined to multimodality approaches (SHG-TCSPC) at macroscopical scale represent an innovative and non-invasive technique to monitor the quality of collagen network in cartilage tissue-engineered substitutes before in vivo implantation.

The Research of Software Engineering Curriculum Reform

NASA Astrophysics Data System (ADS)

Kuang, Li-Qun; Han, Xie

With the problem that software engineering training can't meet the needs of the community, this paper analysis some outstanding reasons in software engineering curriculum teaching, such as old teaching contents, weak in practice and low quality of teachers etc. We propose the methods of teaching reform as guided by market demand, update the teaching content, optimize the teaching methods, reform the teaching practice, strengthen the teacher-student exchange and promote teachers and students together. We carried out the reform and explore positive and achieved the desired results.

Flow Control and Design Assessment for Drainage System at McMurdo Station, Antarctica

DTIC Science & Technology

2014-11-24

Council BMP Best Management Practice CASQUA California Storm Water Quality Task Force CRREL Cold Regions Research and Engineering Laboratory DS...ponds The California Storm Water Quality Task Force (CASQUA 1993) defines a sediment basin as “a pond created by excavation or constructing an em...British Standards Institution. California Storm Water Quality Task Force (CASQUA). 1993. ESC41: Check Dams. In Stormwater Best Management Practices

Strategies for Limiting Engineers' Potential Liability for Indoor Air Quality Problems.

PubMed

von Oppenfeld, Rolf R; Freeze, Mark E; Sabo, Sean M

1998-10-01

Engineers face indoor air quality (IAQ) issues at the design phase of building construction as well as during the investigation and mitigation of potential indoor air pollution problems during building operation. IAQ issues that can be identified are "building-related illnesses" that may include problems of volatile organic compounds (VOCs). IAQ issues that cannot be identified are termed "sick building syndrome." Frequently, microorganism-caused illnesses are difficult to confirm. Engineers who provide professional services that directly or indirectly impact IAQ face significant potential liability to clients and third parties when performing these duties. Potential theories supporting liability claims for IAQ problems against engineers include breach of contract and various common law tort theories such as negligence and negligent misrepresentation. Furthermore, an increasing number of federal, state, and local regulations affect IAQ issues and can directly increase the potential liability of engineers. A duty to disclose potential or actual air quality concerns to third parties may apply for engineers in given circumstances. Such a duty may arise from judicial precedent, the Model Guide for Professional Conduct for Engineers, or the Code of Ethics for Engineers. Practical strategies engineers can use to protect themselves from liability include regular training and continuing education in relevant regulatory, scientific, and case law developments; detailed documentation and recordkeeping practices; adequate insurance coverage; contractual indemnity clauses; contractual provisions limiting liability to the scope of work performed; and contractual provisions limiting the extent of liability for engineers' negligence. Furthermore, through the proper use of building materials and construction techniques, an engineer or other design professional can effectively limit the potential for IAQ liability.

Apollo experience report: Reliability and quality assurance

NASA Technical Reports Server (NTRS)

Sperber, K. P.

1973-01-01

The reliability of the Apollo spacecraft resulted from the application of proven reliability and quality techniques and from sound management, engineering, and manufacturing practices. Continual assessment of these techniques and practices was made during the program, and, when deficiencies were detected, adjustments were made and the deficiencies were effectively corrected. The most significant practices, deficiencies, adjustments, and experiences during the Apollo Program are described in this report. These experiences can be helpful in establishing an effective base on which to structure an efficient reliability and quality assurance effort for future space-flight programs.

Towards a Framework to Improve the Quality of Teaching and Learning: Consciousness and Validation in Computer Engineering Science, UCT

ERIC Educational Resources Information Center

Lévano, Marcos; Albornoz, Andrea

2016-01-01

This paper aims to propose a framework to improve the quality in teaching and learning in order to develop good practices to train professionals in the career of computer engineering science. To demonstrate the progress and achievements, our work is based on two principles for the formation of professionals, one based on the model of learning…

A primer on the cost of quality for improvement of laboratory and pathology specimen processes.

PubMed

Carlson, Richard O; Amirahmadi, Fazlollaah; Hernandez, James S

2012-09-01

In today's environment, many laboratories and pathology practices are challenged to maintain or increase their quality while simultaneously lowering their overall costs. The cost of improving specimen processes is related to quality, and we demonstrate that actual costs can be reduced by designing "quality at the source" into the processes. Various costs are hidden along the total testing process, and we suggest ways to identify opportunities to reduce cost by improving quality in laboratories and pathology practices through the use of Lean, Six Sigma, and industrial engineering.

Integrating Science and Engineering to Implement Evidence-Based Practices in Health Care Settings.

PubMed

Wu, Shinyi; Duan, Naihua; Wisdom, Jennifer P; Kravitz, Richard L; Owen, Richard R; Sullivan, J Greer; Wu, Albert W; Di Capua, Paul; Hoagwood, Kimberly Eaton

2015-09-01

Integrating two distinct and complementary paradigms, science and engineering, may produce more effective outcomes for the implementation of evidence-based practices in health care settings. Science formalizes and tests innovations, whereas engineering customizes and optimizes how the innovation is applied tailoring to accommodate local conditions. Together they may accelerate the creation of an evidence-based healthcare system that works effectively in specific health care settings. We give examples of applying engineering methods for better quality, more efficient, and safer implementation of clinical practices, medical devices, and health services systems. A specific example was applying systems engineering design that orchestrated people, process, data, decision-making, and communication through a technology application to implement evidence-based depression care among low-income patients with diabetes. We recommend that leading journals recognize the fundamental role of engineering in implementation research, to improve understanding of design elements that create a better fit between program elements and local context.

Insights from industry: a quantitative analysis of engineers' perceptions of empathy and care within their practice

NASA Astrophysics Data System (ADS)

Hess, Justin L.; Strobel, Johannes; Pan, Rui Celia; Wachter Morris, Carrie A.

2017-11-01

This study focuses on two seldom-investigated skills or dispositions aligned with engineering habits of mind - empathy and care. In order to conduct quantitative research, we designed, explored the underlying structure of, validated, and tested the reliability of the Empathy and Care Questionnaire (ECQ), a new psychometric instrument. In the second part, we used the ECQ to explore the perceptions of empathy and care of alumni/ae of an internationally ranked US institution, along with how perceptions differed by work experience and gender. Results show that participants perceived empathy and care to be important in multiple respects, most notably in relational aspects of engineering practice. Engineers with more engineering experience were more likely to perceive empathy and care as existing in engineering practice and as important to their work. While these phenomena are sometimes depicted as feminine qualities, we found no gender differences among our respondents.

The MDE Diploma: First International Postgraduate Specialization in Model-Driven Engineering

ERIC Educational Resources Information Center

Cabot, Jordi; Tisi, Massimo

2011-01-01

Model-Driven Engineering (MDE) is changing the way we build, operate, and maintain our software-intensive systems. Several projects using MDE practices are reporting significant improvements in quality and performance but, to be able to handle these projects, software engineers need a set of technical and interpersonal skills that are currently…

Best Practices for Quality Improvement--Lessons from Top Ranked Engineering Institutions

ERIC Educational Resources Information Center

Rao, Potti Srinivasa; Viswanadhan, K. G.; Raghunandana, K.

2015-01-01

Maximum number of privately funded engineering institutions have been established in India in the last two decades to meet the growing needs of technical manpower required by the Engineering and IT companies as well as aspiring students after completion of the Pre-University Program. However, a large number of institutions have not been able to…

Iteration in Early-Elementary Engineering Design

NASA Astrophysics Data System (ADS)

McFarland Kendall, Amber Leigh

K-12 standards and curricula are beginning to include engineering design as a key practice within Science Technology Engineering and Mathematics (STEM) education. However, there is little research on how the youngest students engage in engineering design within the elementary classroom. This dissertation focuses on iteration as an essential aspect of engineering design, and because research at the college and professional level suggests iteration improves the designer's understanding of problems and the quality of design solutions. My research presents qualitative case studies of students in kindergarten and third-grade as they engage in classroom engineering design challenges which integrate with traditional curricula standards in mathematics, science, and literature. I discuss my results through the lens of activity theory, emphasizing practices, goals, and mediating resources. Through three chapters, I provide insight into how early-elementary students iterate upon their designs by characterizing the ways in which lesson design impacts testing and revision, by analyzing the plan-driven and experimentation-driven approaches that student groups use when solving engineering design challenges, and by investigating how students attend to constraints within the challenge. I connect these findings to teacher practices and curriculum design in order to suggest methods of promoting iteration within open-ended, classroom-based engineering design challenges. This dissertation contributes to the field of engineering education by providing evidence of productive engineering practices in young students and support for the value of engineering design challenges in developing students' participation and agency in these practices.

To promote the engineering innovative abilities of undergraduates by taking projects as the guidance and competitions as the promotion

NASA Astrophysics Data System (ADS)

Xu, Yishen; Wu, Di; Chen, Daqing; Gu, Jihua; Gao, Lei

2017-08-01

According to the inherent requirements of education for talents' knowledge, quality and comprehensive ability and the major training goals of optoelectronics information science and engineering, in order to enhance the undergraduates' comprehensive practical ability and consciousness of innovation, we carried out the reforms of teaching method and teaching mode, which took the training programs of innovation and entrepreneurship for undergraduates, extracurricular academic research fund, "Chun-Tsung Scholar" program or research projects of their tutors as the guidance, and took the all levels of relevant discipline competitions as the promotion. And the training mainline of engineering innovation talents as "undergraduate's tutorial system ->innovative training program or tutor's research project ->academic competition ->graduation projects (thesis)" was constructed stage by stage by combining the undergraduates' graduation projects and their participated academic competition into one for improving the quality of the graduation projects (thesis). The practical results of the last several years illuminate that the proposed training model can effectively stimulate the students' awareness of autonomous learning, enhance their comprehensive ability of analyzing and solving problems and improve their ability of engineering practice and innovation as well as their teamwork spirit.

Software IV and V Research Priorities and Applied Program Accomplishments Within NASA

NASA Technical Reports Server (NTRS)

Blazy, Louis J.

2000-01-01

The mission of this research is to be world-class creators and facilitators of innovative, intelligent, high performance, reliable information technologies that enable NASA missions to (1) increase software safety and quality through error avoidance, early detection and resolution of errors, by utilizing and applying empirically based software engineering best practices; (2) ensure customer software risks are identified and/or that requirements are met and/or exceeded; (3) research, develop, apply, verify, and publish software technologies for competitive advantage and the advancement of science; and (4) facilitate the transfer of science and engineering data, methods, and practices to NASA, educational institutions, state agencies, and commercial organizations. The goals are to become a national Center Of Excellence (COE) in software and system independent verification and validation, and to become an international leading force in the field of software engineering for improving the safety, quality, reliability, and cost performance of software systems. This project addresses the following problems: Ensure safety of NASA missions, ensure requirements are met, minimize programmatic and technological risks of software development and operations, improve software quality, reduce costs and time to delivery, and improve the science of software engineering

Engineering Education for Agricultural and Rural Development in Africa

ERIC Educational Resources Information Center

Adewumi, B. A.

2008-01-01

Agricultural Engineering has transformed agricultural practices from subsistence level to medium and large-scale production via mechanisation in the developed nations. This has reduced the labour force requirements in agriculture; increased production levels and efficiency, product shelf life and product quality; and resulted into…

Strategies for Maximizing Successful Drug Substance Technology Transfer Using Engineering, Shake-Down, and Wet Test Runs.

PubMed

Abraham, Sushil; Bain, David; Bowers, John; Larivee, Victor; Leira, Francisco; Xie, Jasmina

2015-01-01

The technology transfer of biological products is a complex process requiring control of multiple unit operations and parameters to ensure product quality and process performance. To achieve product commercialization, the technology transfer sending unit must successfully transfer knowledge about both the product and the process to the receiving unit. A key strategy for maximizing successful scale-up and transfer efforts is the effective use of engineering and shake-down runs to confirm operational performance and product quality prior to embarking on good manufacturing practice runs such as process performance qualification runs. We consider key factors to consider in making the decision to perform shake-down or engineering runs. We also present industry benchmarking results of how engineering runs are used in drug substance technology transfers alongside the main themes and best practices that have emerged. Our goal is to provide companies with a framework for ensuring the "right first time" technology transfers with effective deployment of resources within increasingly aggressive timeline constraints. © PDA, Inc. 2015.

Investigation of the current requirements engineering practices among software developers at the Universiti Utara Malaysia Information Technology (UUMIT) centre

NASA Astrophysics Data System (ADS)

Hussain, Azham; Mkpojiogu, Emmanuel O. C.; Abdullah, Inam

2016-08-01

Requirements Engineering (RE) is a systemic and integrated process of eliciting, elaborating, negotiating, validating and managing of the requirements of a system in a software development project. UUM has been supported by various systems developed and maintained by the UUM Information Technology (UUMIT) Centre. The aim of this study was to assess the current requirements engineering practices at UUMIT. The main problem that prompted this research is the lack of studies that support software development activities at the UUMIT. The study is geared at helping UUMIT produce quality but time and cost saving software products by implementing cutting edge and state of the art requirements engineering practices. Also, the study contributes to UUM by identifying the activities needed for software development so that the management will be able to allocate budget to provide adequate and precise training for the software developers. Three variables were investigated: Requirement Description, Requirements Development (comprising: Requirements Elicitation, Requirements Analysis and Negotiation, Requirements Validation), and Requirement Management. The results from the study showed that the current practice of requirement engineering in UUMIT is encouraging, but still need further development and improvement because a few RE practices were seldom practiced.

Engineering Quality Software: 10 Recommendations for Improved Software Quality Management

DTIC Science & Technology

2010-04-27

lack of user involvement • Inadequate Software Process Management & Control By Contractors • No “Team” of Vendors and users; little SME participation...1990 Quality Perspectives • Process Quality ( CMMI ) • Product Quality (ISO/IEC 2500x) – Internal Quality Attributes – External Quality Attributes... CMMI /ISO 9000 Assessments – Capture organizational knowledge • Identify best practices, lessons learned Know where you are, and where you need to be

IEEE Validation of the Continuing Education Achievement of Engineers Registry System. Procedures for Use with a CPT 8000 Word Processor and Communications Package.

ERIC Educational Resources Information Center

Institute of Electrical and Electronics Engineers, Inc., New York, NY.

The Institute of Electrical and Electronics Engineers (IEEE) validation program is designed to motivate persons practicing in electrical and electronics engineering to pursue quality technical continuing education courses offered by any responsible sponsor. The rapid acceptance of the validation program necessitated the additional development of a…

Integrating Science and Engineering to Implement Evidence-Based Practices in Health Care Settings

PubMed Central

Wu, Shinyi; Duan, Naihua; Wisdom, Jennifer P.; Kravitz, Richard L.; Owen, Richard R.; Sullivan, Greer; Wu, Albert W.; Di Capua, Paul; Hoagwood, Kimberly Eaton

2015-01-01

Integrating two distinct and complementary paradigms, science and engineering, may produce more effective outcomes for the implementation of evidence-based practices in health care settings. Science formalizes and tests innovations, whereas engineering customizes and optimizes how the innovation is applied tailoring to accommodate local conditions. Together they may accelerate the creation of an evidence-based healthcare system that works effectively in specific health care settings. We give examples of applying engineering methods for better quality, more efficient, and safer implementation of clinical practices, medical devices, and health services systems. A specific example was applying systems engineering design that orchestrated people, process, data, decision-making, and communication through a technology application to implement evidence-based depression care among low-income patients with diabetes. We recommend that leading journals recognize the fundamental role of engineering in implementation research, to improve understanding of design elements that create a better fit between program elements and local context. PMID:25217100

The European water framework directive: water quality classification and implications to engineering planning.

PubMed

Achleitner, Stefan; De Toffol, Sara; Engelhard, Carolina; Rauch, Wolfgang

2005-04-01

The European Water framework directive (WFD) is probably the most important environmental management directive that has been enacted over the last decade in the European Union. The directive aims at achieving an overall good ecological status in all European water bodies. In this article, we discuss the implementation steps of the WFD and their implications for environmental engineering practice while focusing on rivers as the main receiving waters. Arising challenges for engineers and scientists are seen in the quantitative assessment of water quality, where standardized systems are needed to estimate the biological status. This is equally of concern in engineering planning, where the prediction of ecological impacts is required. Studies dealing with both classification and prediction of the ecological water quality are reviewed. Further, the combined emission-water quality approach is discussed. Common understanding of this combined approach is to apply the most stringent of either water quality or emission standard to a certain case. In contrast, for example, the Austrian water act enables the application of only the water quality based approach--at least on a temporary basis.

The quest for better quality-of-life - learning from large-scale shaking table tests

NASA Astrophysics Data System (ADS)

Nakashima, M.; Sato, E.; Nagae, T.; Kunio, F.; Takahito, I.

2010-12-01

Earthquake engineering has its origins in the practice of “learning from actual earthquakes and earthquake damages.” That is, we recognize serious problems by witnessing the actual damage to our structures, and then we develop and apply engineering solutions to solve these problems. This tradition in earthquake engineering, i.e., “learning from actual damage,” was an obvious engineering response to earthquakes and arose naturally as a practice in a civil and building engineering discipline that traditionally places more emphasis on experience than do other engineering disciplines. But with the rapid progress of urbanization, as society becomes denser, and as the many components that form our society interact with increasing complexity, the potential damage with which earthquakes threaten the society also increases. In such an era, the approach of ”learning from actual earthquake damages” becomes unacceptably dangerous and expensive. Among the practical alternatives to the old practice is to “learn from quasi-actual earthquake damages.” One tool for experiencing earthquake damages without attendant catastrophe is the large shaking table. E-Defense, the largest one we have, was developed in Japan after the 1995 Hyogoken-Nanbu (Kobe) earthquake. Since its inauguration in 2005, E-Defense has conducted over forty full-scale or large-scale shaking table tests, applied to a variety of structural systems. The tests supply detailed data on actual behavior and collapse of the tested structures, offering the earthquake engineering community opportunities to experience and assess the actual seismic performance of the structures, and to help society prepare for earthquakes. Notably, the data were obtained without having to wait for the aftermaths of actual earthquakes. Earthquake engineering has always been about life safety, but in recent years maintaining the quality of life has also become a critical issue. Quality-of-life concerns include nonstructural damage, business continuity, public health, quickness of damage assessment, infrastructure, data and communication networks, and other issues, and not enough useful empirical data have emerged about these issues from the experiences of actual earthquakes. To provide quantitative data that can be used to reduce earthquake risk to our quality of life, E-Defense recently has been implementing two comprehensive research projects in which a base-isolated hospital and a steel high-rise building were tested using the E-Defense shaking table and their seismic performance were examined particularly in terms of the nonstructural damage, damage to building contents and furniture, and operability, functionality, and business-continuity capability. The paper presents the overview of the two projects, together with major findings obtained from the projects.

Quality - Inexpensive if a way of life.

NASA Technical Reports Server (NTRS)

Grau, D.

1972-01-01

NASA major projects require phased planning. The participation of persons charged with maintaining the proper quality during the last two of four phases has become accepted practice. Current objectives are concerned with the application of quality assurance techniques during the second phase. It is pointed out that quality must be emphasized during the entire engineering process, starting with the selection of the components.

33 CFR 337.7 - Emergency actions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the procedures of this regulation to the maximum degree practicable. The district engineer will issue... action would constitute a major Federal action significantly affecting the quality of the human... Environmental Quality about alternative arrangements for compliance with the NEPA in accordance with 40 CFR 1506...

Scientific Allocation of Water Resources.

ERIC Educational Resources Information Center

Buras, Nathan

Oriented for higher education students, researchers, practicing engineers and planners, this book surveys the state of the art of water resources engineering. A broad spectrum of issues is embraced in the treatment of water resources: quantity aspects as well as quality aspects within a systems approach. Using a rational mode for water resources…

Information Literacy for First-Year Students: An Embedded Curriculum Approach

ERIC Educational Resources Information Center

Andrews, T.; Patil, R.

2007-01-01

The ability to access, evaluate and synthesise high-quality research material is the backbone of critical thinking in academic and professional contexts for Engineers and Industrial Designers. This is the premise upon which teaching and library staff developed Information Literacy (IL) components in Engineering & Industrial Design Practice--a…

Teaching Reform of Civil Engineering Materials Course Based on Project-Driven Pedagogy

NASA Astrophysics Data System (ADS)

Yidong, Xu; Wei, Chen; WeiguoJian, You; Jiansheng, Shen

2018-05-01

In view of the scattered experimental projects in practical courses of civil engineering materials, the poor practical ability of students and the disconnection between practical teaching and theoretical teaching, this paper proposes a practical teaching procedure. Firstly, the single experiment should be offered which emphasizes on improving the students’ basic experimental operating ability. Secondly, the compressive experiment is offered and the overall quality of students can be examined in the form of project team. In order to investigate the effect of teaching reform, the comparative analysis of the students of three grades (2014, 2015 and 2016) majored in civil engineering was conducted. The result shows that the students’ ability of experimental operation is obviously improved by using the project driven method-based teaching reform. Besides, the students’ ability to analyse and solve problems has also been improved.

Nursing informatics, outcomes, and quality improvement.

PubMed

Charters, Kathleen G

2003-08-01

Nursing informatics actively supports nursing by providing standard language systems, databases, decision support, readily accessible research results, and technology assessments. Through normalized datasets spanning an entire enterprise or other large demographic, nursing informatics tools support improvement of healthcare by answering questions about patient outcomes and quality improvement on an enterprise scale, and by providing documentation for business process definition, business process engineering, and strategic planning. Nursing informatics tools provide a way for advanced practice nurses to examine their practice and the effect of their actions on patient outcomes. Analysis of patient outcomes may lead to initiatives for quality improvement. Supported by nursing informatics tools, successful advance practice nurses leverage their quality improvement initiatives against the enterprise strategic plan to gain leadership support and resources.

15 CFR 922.142 - Prohibited or otherwise regulated activities.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Sanctuary and injures a Sanctuary resource or quality. (2) Exploring for, developing or producing industrial... maximum extent practicable any advance impact on Sanctuary resources and qualities. Civil engineering and... industrial materials within the Sanctuary, or the disposal of dredged materials within the Sanctuary (except...

15 CFR 922.142 - Prohibited or otherwise regulated activities.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Sanctuary and injures a Sanctuary resource or quality. (2) Exploring for, developing or producing industrial... maximum extent practicable any advance impact on Sanctuary resources and qualities. Civil engineering and... industrial materials within the Sanctuary, or the disposal of dredged materials within the Sanctuary (except...

15 CFR 922.142 - Prohibited or otherwise regulated activities.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Sanctuary and injures a Sanctuary resource or quality. (2) Exploring for, developing or producing industrial... maximum extent practicable any advance impact on Sanctuary resources and qualities. Civil engineering and... industrial materials within the Sanctuary, or the disposal of dredged materials within the Sanctuary (except...

Space shuttle main engine anomaly data and inductive knowledge based systems: Automated corporate expertise

NASA Technical Reports Server (NTRS)

Modesitt, Kenneth L.

1987-01-01

Progress is reported on the development of SCOTTY, an expert knowledge-based system to automate the analysis procedure following test firings of the Space Shuttle Main Engine (SSME). The integration of a large-scale relational data base system, a computer graphics interface for experts and end-user engineers, potential extension of the system to flight engines, application of the system for training of newly-hired engineers, technology transfer to other engines, and the essential qualities of good software engineering practices for building expert knowledge-based systems are among the topics discussed.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 13: The information-seeking habits and practices of engineers

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.

1991-01-01

It is argued that only by maximizing the research and development process can the United States maintain and possibly capture its international competitive edge. Key to this goal is the provision of information services and products which meet the information needs of engineers. Evidence exists which indicates that traditional information services and products may, in fact, not be meeting the information needs of engineers. The primary reason for this deficiency is three fold. First, the specific information needs of engineers are neither well known nor well understood. Second, what is known about the information seeking habits and practices of engineers has not been applied to existing engineering information services. Third, the information professionals continue to over-emphasize technology instead of concentrating on the quality of the information itself and the ability of the information to meet the needs of the user.

The research and practice of spacecraft software engineering

NASA Astrophysics Data System (ADS)

Chen, Chengxin; Wang, Jinghua; Xu, Xiaoguang

2017-06-01

In order to ensure the safety and reliability of spacecraft software products, it is necessary to execute engineering management. Firstly, the paper introduces the problems of unsystematic planning, uncertain classified management and uncontinuous improved mechanism in domestic and foreign spacecraft software engineering management. Then, it proposes a solution for software engineering management based on system-integrated ideology in the perspective of spacecraft system. Finally, a application result of spacecraft is given as an example. The research can provides a reference for executing spacecraft software engineering management and improving software product quality.

Photoelectric professional students in common universities cultivate way to explore under the background of professional certification

NASA Astrophysics Data System (ADS)

Sun, Yan-jun; Wang, Li; Leng, Yan-bing

2017-08-01

In view of the engineering education professional certification of specialty construction and the specific requirements of the training system, combining with our school optoelectronic information science and engineering characteristics, analysis of the optoelectronic information science and engineering in our school problems and challenges, to locate the specific professional training objectives. From the service oriented industry demand for talent ability, at the same time, according to the ministry of education professional norms of the development of the photoelectric teaching steering committee, and the professional development and the characteristics of target, to build a set to conform to the goal of cultivating the professional curriculum system. At the same time set up a from fundamental to professional practice teaching system, covers the course experiment, course design, case teaching, comprehensive training, such as graduation design practice. Which implements a whole ability training from the practice of foundation to high-end chain, embodies the training goal emphasize "outstanding practical skills, quality education is distinct culture characteristic. By further speed up the professional construction, professional certification standards to standardize our training process, improved the level of professional training, and improve the comprehensive quality of the graduates and talent of social competitiveness, fostered more professional talents for the country.

DEVELOPMENT OF GUIDELINES FOR CALIBRATING, VALIDATING, AND EVALUATING HYDROLOGIC AND WATER QUALITY MODELS: ASABE ENGINEERING PRACTICE 621

USDA-ARS?s Scientific Manuscript database

Information to support application of hydrologic and water quality (H/WQ) models abounds, yet modelers commonly use arbitrary, ad hoc methods to conduct, document, and report model calibration, validation, and evaluation. Consistent methods are needed to improve model calibration, validation, and e...

Science, Technology, Engineering, Mathematics (STEM): Catalyzing Change Amid the Confusion

ERIC Educational Resources Information Center

Barakos, Lynn; Lujan, Vanessa; Strang, Craig

2012-01-01

Over the past eight years or so, educators have struggled to make sense of the many views and definitions of science, technology, engineering, and mathematics (STEM) education and what constitutes quality in STEM practices. The multitude of recent STEM funding opportunities has done little to create a common understanding about how to best engage…

Quality-assurance plan and field methods for quality-of-water activities, U.S. Geological Survey, Idaho National Engineering Laboratory, Idaho

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mann, L.J.

1996-10-01

Water-quality activities at the Idaho National Engineering Laboratory (INEL) Project Office are part of the US Geological Survey`s (USGS) Water Resources Division (WRD) mission of appraising the quantity and quality of the Nation`s water resources. The purpose of the Quality Assurance Plan (QAP) for water-quality activities performed by the INEL Project Office is to maintain and improve the quality of technical products, and to provide a formal standardization, documentation, and review of the activities that lead to these products. The principles of this plan are as follows: (1) water-quality programs will be planned in a competent manner and activities willmore » be monitored for compliance with stated objectives and approaches; (2) field, laboratory, and office activities will be performed in a conscientious and professional manner in accordance with specified WRD practices and procedures by qualified and experienced employees who are well trained and supervised, if or when, WRD practices and procedures are inadequate, data will be collected in a manner that its quality will be documented; (3) all water-quality activities will be reviewed for completeness, reliability, credibility, and conformance to specified standards and guidelines; (4) a record of actions will be kept to document the activity and the assigned responsibility; (5) remedial action will be taken to correct activities that are deficient.« less

Software technology insertion: A study of success factors

NASA Technical Reports Server (NTRS)

Lydon, Tom

1990-01-01

Managing software development in large organizations has become increasingly difficult due to increasing technical complexity, stricter government standards, a shortage of experienced software engineers, competitive pressure for improved productivity and quality, the need to co-develop hardware and software together, and the rapid changes in both hardware and software technology. The 'software factory' approach to software development minimizes risks while maximizing productivity and quality through standardization, automation, and training. However, in practice, this approach is relatively inflexible when adopting new software technologies. The methods that a large multi-project software engineering organization can use to increase the likelihood of successful software technology insertion (STI), especially in a standardized engineering environment, are described.

The Impact of Organisational Change on the Nature and Extent of Training in Australian Enterprises

ERIC Educational Resources Information Center

Smith, Andrew; Oczkowski, Edward; Noble, Charles; Macklin, Robert

2004-01-01

This article reports on a study investigating the relationship between the introduction of new management practices and the training provided by Australian enterprises for their employees. The new management practices investigated include teamworking, total quality management, lean production, business process re-engineering and the learning…

Feasibility of CO/sub 2/ monitoring to assess air quality in mines using diesel equipment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daniel, J.H. Jr.

1987-01-01

The methodology includes: (1) establishing pollutant to CO/sub 2/ ratios for in-service equipment, (2) estimating pollutant concentrations from the ratios and in-mine CO/sub 2/ measurements, and (3) using an air quality index to combine the pollutants into a single number, which indicates the health hazard associated with the pollutants. For the methodology to be valid, the pollutant to CO/sub 2/ ratios must remain constant if engine operating conditions do not significantly change. However, due to the complex dynamics of the fuel injection system, the fuel-air combustion process, and the engine speed-load governing system, the pollutant to CO/sub 2/ ratios maymore » vary during repetitive, but transient engine speed-and-load operation. These transient effects were investigated. In addition, the influence of changing engine conditions due to engine maladjustment, and a practical means to evaluate engine condition were investigated to advance the methodology. The laboratory investigation determined that CO/sub 2/ is an effective indicator of engine exhaust pollutants. It was shown that the exhaust concentrations of carbon monoxide, carbon dioxide, oxides of nitrogen, hydrocarbons, and particulate matter do not significantly vary among repetitive, but transient engine speed-and-load duty cycles typical of in-service equipment. Based on an air quality index and threshold limit values, particulate matter exhibited the greatest adverse effect on air quality. Particulate mass was separated into volatile (organic soluble fraction) and nonvolatile (insoluble carbon fraction) components. Due to particulate concentrations, the engine operating conditions of overfueling and advanced injector timing had greater adverse effects on air quality than the conditions of retarded injector timing, intake air restriction, and Federal certification specifications.« less

[From gene cloning to expressional analysis--practice and experience from educational reform of experimental gene engineering].

PubMed

Wu, Yan-Hua; Guo, Bin; Lou, Hui-Ling; Cui, Yu-Liang; Gu, Hui-Juan; Qiao, Shou-Yi

2012-02-01

Experimental gene engineering is a laboratory course focusing on the molecular structure, expression pattern and biological function of genes. Providing our students with a solid knowledge base and correct ways to conduct research is very important for high-quality education of genetic engineering. Inspired by recent progresses in this field, we improved the experimental gene engineering course by adding more updated knowledge and technologies and emphasizing on the combination of teaching and research, with the aim of offering our students a good start in their scientific careers.

Enhancing Critical Thinking Via a Clinical Scholar Approach.

PubMed

Simpson, Vicki; McComb, Sara A; Kirkpatrick, Jane M

2017-11-01

Safety, quality improvement, and a systems perspective are vital for nurses to provide quality evidence-based care. Responding to the call to prepare nurses with these perspectives, one school of nursing used a clinical scholar approach, enhanced by systems engineering to more intentionally develop the ability to clinically reason and apply evidence-based practice. A two-group, repeated-measures control trial was used to determine the effects of systems engineering content and support on nursing students' clinical judgment and critical thinking skills. Findings indicated this approach had a positive effects on student's clinical judgment and clinical reasoning skills. This approach helped students view health care issues from a broader perspective and use evidence to guide solution development, enhancing the focus on evidence-based practice, and quality improvement. Intentional integration of an evidence-based, systems perspective by nursing faculty supports development of nurses who can function safely and effectively in the current health care system. [J Nurs Educ. 2017;56(11):679-682.]. Copyright 2017, SLACK Incorporated.

Reform and practice for photoelectric specialty experimental teaching based on virtual simulation experiment platform

NASA Astrophysics Data System (ADS)

Ye, Yan; Lv, Qingsong; Wu, Maocheng; Xu, Yishen; Gu, Jihua

2017-08-01

In view of some problems about the traditional photoelectric specialty experimental teaching process, such as separation of theoretical teaching and practical teaching, immobilization of experimental teaching contents, low quality of experiments and no obvious effect, we explored and practiced a new experimental teaching model of "theoretical teaching, virtual simulation and physical experiment", which combined the characteristics of photoelectric information science and engineering major and the essential requirements of engineering innovation talents cultivation. The virtual simulation experiment platform has many advantages, such as high performance-to-price ratio, easy operation and open experimental process, which makes virtual simulation combine physical experiment, complete each other with virtual for practical. After the users log into the virtual simulation experimental platform, they will first study the contents of the experiment, clarify the purpose and requirements of the experiment, master the method of using the instrument and the relevant notes, and then use the experimental instruments provided by the platform to build the corresponding experimental system. Once the experimenter's optical path is set incorrectly or the instrument parameters are set incorrectly, the error or warning message will be automatically triggered, and the reference information will be given instructing the student to complete the correct experimental operation. The results of our practice in recent years show that the teaching reform of the photoelectric specialty experiments has not only brought great convenience to the experimental teaching management, broadened the students' thinking and vision, enhanced the students' experimental skills and comprehensive qualities, but also made the students participate in the experiment with their enthusiasm. During the construction of experiment programs, the students' engineering practical ability and independent innovation awareness has been improved greatly. In the next time, based on the development trend of optoelectronic discipline and our own major characteristics, we will further perfect and enrich the construction of virtual simulation experimental platform and continuously improve the quality of experimental teaching.

Comparison of Quality Engineering Practices in Malaysian and Indonesian Automotive Related Companies

NASA Astrophysics Data System (ADS)

Putri, Nilda Tri; Sha'ri Mohd, Yusof; Irianto, Dradjad

2016-02-01

The main motivating factor driving this research is to find differences between the automotive related companies in Malaysia and Indonesia with regard to quality engineering (QE) implementation. A comparative study between Malaysia and Indonesia provides the opportunity to gain perspective and thorough understanding of the similarities and differences on the critical factors for successful QE practices in the context of both these countries. Face to face interviews are used to compare the QE practices in two automotive companies in Malaysia and Indonesia, respectively. The findings of study showed that both countries have clear quality objectives to achieving zero defects in processes and products and total customer satisfaction. Top and middle management in both countries were found to be directly involved in quality improvement on the shop floor to provide On-The-Job training and actively encourage team members to perform quality problem solving through the formation of quality control circles (QCC) particularly in Indonesia automotive industry. In Malaysia automotive industry, the implementation was not fully effective, but they have started to cultivate those values in the daily execution. Based on the case study results and analysis, the researcher has provided suggestions for both countries as an improvement plan for successful QE implementation. These recommendations will allow management to implement appropriate strategies for better QE implementation which hopefully can improve company's performance and ultimately the making the automotive industry in both countries to reach world class quality. It is strongly believed that the findings of this study can help Malaysia and Indonesia automotive industries in their efforts to become more effective and competitive.

The Impact of Design-Based STEM Integration Curricula on Student Achievement in Engineering, Science, and Mathematics

NASA Astrophysics Data System (ADS)

Selcen Guzey, S.; Harwell, Michael; Moreno, Mario; Peralta, Yadira; Moore, Tamara J.

2017-04-01

The new science education reform documents call for integration of engineering into K-12 science classes. Engineering design and practices are new to most science teachers, meaning that implementing effective engineering instruction is likely to be challenging. This quasi-experimental study explored the influence of teacher-developed, engineering design-based science curriculum units on learning and achievement among grade 4-8 students of different races, gender, special education status, and limited English proficiency (LEP) status. Treatment and control students ( n = 4450) completed pretest and posttest assessments in science, engineering, and mathematics as well as a state-mandated mathematics test. Single-level regression results for science outcomes favored the treatment for one science assessment (physical science, heat transfer), but multilevel analyses showed no significant treatment effect. We also found that engineering integration had different effects across race and gender and that teacher gender can reduce or exacerbate the gap in engineering achievement for student subgroups depending on the outcome. Other teacher factors such as the quality of engineering-focused science units and engineering instruction were predictive of student achievement in engineering. Implications for practice are discussed.

Human factors systems approach to healthcare quality and patient safety

PubMed Central

Carayon, Pascale; Wetterneck, Tosha B.; Rivera-Rodriguez, A. Joy; Hundt, Ann Schoofs; Hoonakker, Peter; Holden, Richard; Gurses, Ayse P.

2013-01-01

Human factors systems approaches are critical for improving healthcare quality and patient safety. The SEIPS (Systems Engineering Initiative for Patient Safety) model of work system and patient safety is a human factors systems approach that has been successfully applied in healthcare research and practice. Several research and practical applications of the SEIPS model are described. Important implications of the SEIPS model for healthcare system and process redesign are highlighted. Principles for redesigning healthcare systems using the SEIPS model are described. Balancing the work system and encouraging the active and adaptive role of workers are key principles for improving healthcare quality and patient safety. PMID:23845724

Effectiveness of best management practices that have application to forest roads: a literature synthesis

Treesearch

Pamela J. Edwards; Frederica Wood; Robin L. Quinlivan

2016-01-01

Literature describing the effectiveness of best management practices (BMPs) applicable to forest roads is reviewed and synthesized. Effectiveness is considered from the perspective of protecting water quality and water resources. Both paved and unpaved forest roads are considered, but BMPs that involve substantial engineering are not considered. Some of the BMPs...

Precision manufacturing for clinical-quality regenerative medicines.

PubMed

Williams, David J; Thomas, Robert J; Hourd, Paul C; Chandra, Amit; Ratcliffe, Elizabeth; Liu, Yang; Rayment, Erin A; Archer, J Richard

2012-08-28

Innovations in engineering applied to healthcare make a significant difference to people's lives. Market growth is guaranteed by demographics. Regulation and requirements for good manufacturing practice-extreme levels of repeatability and reliability-demand high-precision process and measurement solutions. Emerging technologies using living biological materials add complexity. This paper presents some results of work demonstrating the precision automated manufacture of living materials, particularly the expansion of populations of human stem cells for therapeutic use as regenerative medicines. The paper also describes quality engineering techniques for precision process design and improvement, and identifies the requirements for manufacturing technology and measurement systems evolution for such therapies.

[Civil engineering education at the Imperial College of Engineering in Tokyo: an analysis based on Ayahiko Ishibashi's memoirs].

PubMed

Wada, Masanori

2014-01-01

The Imperial College of Engineering (ICE or Kobu-Daigakko) in Tokyo, founded in 1873 under the auspices of the Ministry of Public Works, was one of the most prominent modern institutions of engineering education in early Meiji Japan. Previous studies have revealed that the ICE offered large scale practical training programs at enterprises of the Ministry, which sometimes lasted several months, and praised their ideal combination of theory and practice. In reality, it has been difficult to evaluate the quality of education at the ICE mainly because of scarcity of sources. ICE students published a collection of memoirs for alumni members, commemorating the fiftieth-year of the history of the Tokyo Imperial University. Drawing on the previously neglected collection of students' memoires, this paper appraises the education of civil engineering offered by the ICE. The paper also compares this collection with other official records of the college, and confirms it as a reliable source, even though it contains some minor errors. The author particularly uses the memoirs by Ayahiko Ishibashi, one of the first graduates from its civil engineering course, who left sufficient reminiscences on education that he received. This paper, as a result, illustrates that the main practical training for the students of civil engineering was limited to designing process, including surveying. Furthermore, practical training that Ishibashi received at those enterprises often lacked a plan, and its effectiveness was questionable.

Methods and Strategies: Beyond the Textbook--But Not Just "Hands On". Using High-Quality Informational Texts to Meet the "Next Generation Science Standards"

ERIC Educational Resources Information Center

Vick, Matthew

2016-01-01

Science teaching continues to move away from teaching science as merely a body of facts and figures to be memorized to a process of exploring and drawing conclusions. The Next Generation Science Standards (NGSS) emphasize eight science and engineering practices that ask students to apply scientific and engineering reasoning and explanation. This…

Software Engineering Education Directory

DTIC Science & Technology

1988-01-01

Dana Hausman and Suzanne Woolf were crucial to the successful completion of this edition of the directory. Their teamwork, energy, and dedication...for this directory began in the summer of 1986 with a questionnaire mailed to schools selected from Peterson’s Graduate Programs in Engineering and...Christoper, and Siegel, Stan Software Cost Estimation and Life-Cycle Control by Putnam, Lawrence H. Software Quality Assurance: A Practical Approach by

The State of Software for Evolutionary Biology.

PubMed

Darriba, Diego; Flouri, Tomáš; Stamatakis, Alexandros

2018-05-01

With Next Generation Sequencing data being routinely used, evolutionary biology is transforming into a computational science. Thus, researchers have to rely on a growing number of increasingly complex software. All widely used core tools in the field have grown considerably, in terms of the number of features as well as lines of code and consequently, also with respect to software complexity. A topic that has received little attention is the software engineering quality of widely used core analysis tools. Software developers appear to rarely assess the quality of their code, and this can have potential negative consequences for end-users. To this end, we assessed the code quality of 16 highly cited and compute-intensive tools mainly written in C/C++ (e.g., MrBayes, MAFFT, SweepFinder, etc.) and JAVA (BEAST) from the broader area of evolutionary biology that are being routinely used in current data analysis pipelines. Because, the software engineering quality of the tools we analyzed is rather unsatisfying, we provide a list of best practices for improving the quality of existing tools and list techniques that can be deployed for developing reliable, high quality scientific software from scratch. Finally, we also discuss journal as well as science policy and, more importantly, funding issues that need to be addressed for improving software engineering quality as well as ensuring support for developing new and maintaining existing software. Our intention is to raise the awareness of the community regarding software engineering quality issues and to emphasize the substantial lack of funding for scientific software development.

Interdisciplinary Interactions During R&D and Early Design of Large Engineered Systems

NASA Technical Reports Server (NTRS)

McGowan, Anna-Maria Rivas

2014-01-01

Designing Large-Scale Complex Engineered Systems (LaCES) such as aircraft and submarines requires the input of thousands of engineers and scientists whose work is proximate in neither time nor space. Comprehensive knowledge of the system is dispersed among specialists whose expertise is in typically one system component or discipline. This study examined the interactive work practices among such specialists seeking to improve engineering practice through a rigorous and theoretical understanding of current practice. This research explored current interdisciplinary practices and perspectives during R&D and early LaCES design and identified why these practices and perspectives prevail and persist. The research design consisted of a three-fold, integrative approach that combined an open-ended survey, semi-structured interviews, and ethnography. Significant empirical data from experienced engineers and scientists in a large engineering organization were obtained and integrated with theories from organization science and engineering. Qualitative analysis was used to obtain a holistic, contextualized understanding. The over-arching finding is that issues related to cognition, organization, and social interrelations mostly dominate interactions across disciplines. Engineering issues, such as the integration of hardware or physics-based models, are not as significant. For example, organization culture is an important underlying factor that guided researchers more toward individual sovereignty over cross-disciplinarity. The organization structure and the engineered system architecture also serve as constraints to the engineering work. Many differences in work practices were observed, including frequency and depth of interactions, definition or co-construction of requirements, clarity or creation of the system architecture, work group proximity, and cognitive challenges. Practitioners are often unaware of these differences resulting in confusion and incorrect assumptions regarding work expectations. Cognitively, the enactment and coconstruction of knowledge are the fundamental tasks of the interdisciplinary interactions. Distributed and collective cognition represent most of the efforts. Argument, ignorance, learning, and creativity are interrelated aspects of the interactions that cause discomfort but yield benefits such as problem mitigation, broader understanding, and improved system design and performance. The quality and quantity of social interrelations are central to all work across disciplines with reciprocity, respectful engagement, and heedful interrelations being significant to the effectiveness of the engineering and scientific work.

Research on the Implementation of Technological Measures for Controlling Indoor Environmental Quality in Green Residential Buildings

NASA Astrophysics Data System (ADS)

Wang, Ruozhu; Liu, Pengda; Qian, Yongmei

2018-02-01

This paper analyzes the design technology of controlling indoor quality in engineering practice, it is proposed that, in framework system of green residential building design, how to realize the design idea of controlling the indoor environment quality, and the design technology with feasibility, including the sunshine and lighting, indoor air quality and thermal environment, sound insulation and noise reduction measures, etc.. The results of all will provide a good theoretical supportting for the design of green residential building.

A New Era of Science Education: Science Teachers' Perceptions and Classroom Practices of Science, Technology, Engineering, and Mathematics (STEM) Integration

NASA Astrophysics Data System (ADS)

Wang, Hui-Hui

Quality STEM education is the key in helping the United States maintain its lead in global competitiveness and in preparing for new economic and security challenges in the future. Policymakers and professional societies emphasize STEM education by legislating the addition of engineering standards to the existing science standards. On the other hand, the nature of the work of most STEM professionals requires people to actively apply STEM knowledge to make critical decisions. Therefore, using an integrated approach to teaching STEM in K-12 is expected. However, science teachers encounter numerous difficulties in adapting the new STEM integration reforms into their classrooms because of a lack of knowledge and experience. Therefore, high quality STEM integration professional development programs are an urgent necessity. In order to provide these high quality programs, it is important to understand teachers' perceptions and classroom practices regarding STEM integration. A multiple-case study was conducted with five secondary school science teachers in order to gain a better understanding of teachers' perceptions and classroom practices in using STEM integration. This study addresses the following research questions: 1) What are secondary school science teachers' practices of STEM integration? 2) What are secondary science teachers' overall perceptions of STEM integration? and 3) What is the connection between secondary science teachers' perceptions and understanding of STEM integration with their classroom practices? This research aims to explore teachers' perceptions and classroom practices in order to set up the baseline for STEM integration and also to determine STEM integration professional development best practices in science education. Findings from the study provide critical data for making informed decision about the direction for STEM integration in science education in K-12.

Work System Assessment to Facilitate the Dissemination of a Quality Improvement Program for Optimizing Blood Culture Use: A Case Study Using a Human Factors Engineering Approach.

PubMed

Xie, Anping; Woods-Hill, Charlotte Z; King, Anne F; Enos-Graves, Heather; Ascenzi, Judy; Gurses, Ayse P; Klaus, Sybil A; Fackler, James C; Milstone, Aaron M

2017-11-20

Work system assessments can facilitate successful implementation of quality improvement programs. Using a human factors engineering approach, we conducted a work system assessment to facilitate the dissemination of a quality improvement program for optimizing blood culture use in pediatric intensive care units at 2 hospitals. Semistructured face-to-face interviews were conducted with clinicians from Johns Hopkins All Children's Hospital and University of Virginia Medical Center. Interview data were analyzed using qualitative content analysis. Blood culture-ordering practices are influenced by various work system factors, including people, tasks, tools and technologies, the physical environment, organizational conditions, and the external environment. A clinical decision-support tool could facilitate implementation by (1) standardizing blood culture-ordering practices, (2) ensuring that prescribing clinicians review the patient's condition before ordering a blood culture, (3) facilitating critical thinking, and (4) empowering nurses to communicate with physicians and advocate for adherence to blood culture-ordering guidelines. The success of interventions for optimizing blood culture use relies heavily on the local context. A work system analysis using a human factors engineering approach can identify key areas to be addressed for the successful dissemination of quality improvement interventions. © The Author 2017. Published by Oxford University Press on behalf of The Journal of the Pediatric Infectious Diseases Society. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Usability Prediction & Ranking of SDLC Models Using Fuzzy Hierarchical Usability Model

NASA Astrophysics Data System (ADS)

Gupta, Deepak; Ahlawat, Anil K.; Sagar, Kalpna

2017-06-01

Evaluation of software quality is an important aspect for controlling and managing the software. By such evaluation, improvements in software process can be made. The software quality is significantly dependent on software usability. Many researchers have proposed numbers of usability models. Each model considers a set of usability factors but do not cover all the usability aspects. Practical implementation of these models is still missing, as there is a lack of precise definition of usability. Also, it is very difficult to integrate these models into current software engineering practices. In order to overcome these challenges, this paper aims to define the term `usability' using the proposed hierarchical usability model with its detailed taxonomy. The taxonomy considers generic evaluation criteria for identifying the quality components, which brings together factors, attributes and characteristics defined in various HCI and software models. For the first time, the usability model is also implemented to predict more accurate usability values. The proposed system is named as fuzzy hierarchical usability model that can be easily integrated into the current software engineering practices. In order to validate the work, a dataset of six software development life cycle models is created and employed. These models are ranked according to their predicted usability values. This research also focuses on the detailed comparison of proposed model with the existing usability models.

A Scenario-Based Process for Requirements Development: Application to Mission Operations Systems

NASA Technical Reports Server (NTRS)

Bindschadler, Duane L.; Boyles, Carole A.

2008-01-01

The notion of using operational scenarios as part of requirements development during mission formulation (Phases A & B) is widely accepted as good system engineering practice. In the context of developing a Mission Operations System (MOS), there are numerous practical challenges to translating that notion into the cost-effective development of a useful set of requirements. These challenges can include such issues as a lack of Project-level focus on operations issues, insufficient or improper flowdown of requirements, flowdown of immature or poor-quality requirements from Project level, and MOS resource constraints (personnel expertise and/or dollars). System engineering theory must be translated into a practice that provides enough structure and standards to serve as guidance, but that retains sufficient flexibility to be tailored to the needs and constraints of a particular MOS or Project. We describe a detailed, scenario-based process for requirements development. Identifying a set of attributes for high quality requirements, we show how the portions of the process address many of those attributes. We also find that the basic process steps are robust, and can be effective even in challenging Project environments.

Applying Semantic Web technologies to improve the retrieval, credibility and use of health-related web resources.

PubMed

Mayer, Miguel A; Karampiperis, Pythagoras; Kukurikos, Antonis; Karkaletsis, Vangelis; Stamatakis, Kostas; Villarroel, Dagmar; Leis, Angela

2011-06-01

The number of health-related websites is increasing day-by-day; however, their quality is variable and difficult to assess. Various "trust marks" and filtering portals have been created in order to assist consumers in retrieving quality medical information. Consumers are using search engines as the main tool to get health information; however, the major problem is that the meaning of the web content is not machine-readable in the sense that computers cannot understand words and sentences as humans can. In addition, trust marks are invisible to search engines, thus limiting their usefulness in practice. During the last five years there have been different attempts to use Semantic Web tools to label health-related web resources to help internet users identify trustworthy resources. This paper discusses how Semantic Web technologies can be applied in practice to generate machine-readable labels and display their content, as well as to empower end-users by providing them with the infrastructure for expressing and sharing their opinions on the quality of health-related web resources.

An Architecture, System Engineering, and Acquisition Approach for Space System Software Resiliency

NASA Astrophysics Data System (ADS)

Phillips, Dewanne Marie

Software intensive space systems can harbor defects and vulnerabilities that may enable external adversaries or malicious insiders to disrupt or disable system functions, risking mission compromise or loss. Mitigating this risk demands a sustained focus on the security and resiliency of the system architecture including software, hardware, and other components. Robust software engineering practices contribute to the foundation of a resilient system so that the system "can take a hit to a critical component and recover in a known, bounded, and generally acceptable period of time". Software resiliency must be a priority and addressed early in the life cycle development to contribute a secure and dependable space system. Those who develop, implement, and operate software intensive space systems must determine the factors and systems engineering practices to address when investing in software resiliency. This dissertation offers methodical approaches for improving space system resiliency through software architecture design, system engineering, increased software security, thereby reducing the risk of latent software defects and vulnerabilities. By providing greater attention to the early life cycle phases of development, we can alter the engineering process to help detect, eliminate, and avoid vulnerabilities before space systems are delivered. To achieve this objective, this dissertation will identify knowledge, techniques, and tools that engineers and managers can utilize to help them recognize how vulnerabilities are produced and discovered so that they can learn to circumvent them in future efforts. We conducted a systematic review of existing architectural practices, standards, security and coding practices, various threats, defects, and vulnerabilities that impact space systems from hundreds of relevant publications and interviews of subject matter experts. We expanded on the system-level body of knowledge for resiliency and identified a new software architecture framework and acquisition methodology to improve the resiliency of space systems from a software perspective with an emphasis on the early phases of the systems engineering life cycle. This methodology involves seven steps: 1) Define technical resiliency requirements, 1a) Identify standards/policy for software resiliency, 2) Develop a request for proposal (RFP)/statement of work (SOW) for resilient space systems software, 3) Define software resiliency goals for space systems, 4) Establish software resiliency quality attributes, 5) Perform architectural tradeoffs and identify risks, 6) Conduct architecture assessments as part of the procurement process, and 7) Ascertain space system software architecture resiliency metrics. Data illustrates that software vulnerabilities can lead to opportunities for malicious cyber activities, which could degrade the space mission capability for the user community. Reducing the number of vulnerabilities by improving architecture and software system engineering practices can contribute to making space systems more resilient. Since cyber-attacks are enabled by shortfalls in software, robust software engineering practices and an architectural design are foundational to resiliency, which is a quality that allows the system to "take a hit to a critical component and recover in a known, bounded, and generally acceptable period of time". To achieve software resiliency for space systems, acquirers and suppliers must identify relevant factors and systems engineering practices to apply across the lifecycle, in software requirements analysis, architecture development, design, implementation, verification and validation, and maintenance phases.

A Pragmatic Approach to Ethical Decision-Making in Engineering Practice: Characteristics, Evaluation Criteria, and Implications for Instruction and Assessment.

PubMed

Zhu, Qin; Jesiek, Brent K

2017-06-01

This paper begins by reviewing dominant themes in current teaching of professional ethics in engineering education. In contrast to more traditional approaches that simulate ethical practice by using ethical theories to reason through micro-level ethical dilemmas, this paper proposes a pragmatic approach to ethics that places more emphasis on the practical plausibility of ethical decision-making. In addition to the quality of ethical justification, the value of a moral action also depends on its effectiveness in solving an ethical dilemma, cultivating healthy working relationships, negotiating existing organizational cultures, and achieving contextual plausibility in everyday professional practice. This paper uses a cross-cultural ethics scenario to further elaborate how a pragmatic approach can help us rethink ethical reasoning, as well as ethics instruction and assessment. This paper is expected to be of interest to educators eager to improve the ability of engineers and other professional students to effectively and appropriately deal with the kinds of everyday ethical issues they will likely face in their careers.

The State of Software for Evolutionary Biology

PubMed Central

Darriba, Diego; Flouri, Tomáš; Stamatakis, Alexandros

2018-01-01

Abstract With Next Generation Sequencing data being routinely used, evolutionary biology is transforming into a computational science. Thus, researchers have to rely on a growing number of increasingly complex software. All widely used core tools in the field have grown considerably, in terms of the number of features as well as lines of code and consequently, also with respect to software complexity. A topic that has received little attention is the software engineering quality of widely used core analysis tools. Software developers appear to rarely assess the quality of their code, and this can have potential negative consequences for end-users. To this end, we assessed the code quality of 16 highly cited and compute-intensive tools mainly written in C/C++ (e.g., MrBayes, MAFFT, SweepFinder, etc.) and JAVA (BEAST) from the broader area of evolutionary biology that are being routinely used in current data analysis pipelines. Because, the software engineering quality of the tools we analyzed is rather unsatisfying, we provide a list of best practices for improving the quality of existing tools and list techniques that can be deployed for developing reliable, high quality scientific software from scratch. Finally, we also discuss journal as well as science policy and, more importantly, funding issues that need to be addressed for improving software engineering quality as well as ensuring support for developing new and maintaining existing software. Our intention is to raise the awareness of the community regarding software engineering quality issues and to emphasize the substantial lack of funding for scientific software development. PMID:29385525

Failure is an option: Reactions to failure in elementary engineering design projects

NASA Astrophysics Data System (ADS)

Johnson, Matthew M.

Recent reform documents in science education have called for teachers to use epistemic practices of science and engineering researchers to teach disciplinary content (NRC, 2007; NRC, 2012; NGSS Lead States, 2013). Although this creates challenges for classroom teachers unfamiliar with engineering, it has created a need for high quality research about how students and teachers engage in engineering activities to improve curriculum development and teaching pedagogy. While framers of the Next Generation Science Standards (NRC, 2012; NGSS Lead States 2013) focused on the similarities of the practices of science researchers and engineering designers, some have proposed that engineering has a unique set of epistemic practices, including improving from failure (Cunningham & Carlsen, 2014; Cunningham & Kelly, in review). While no one will deny failures occur in science, failure in engineering is thought of in fundamentally different ways. In the study presented here, video data from eight classes of elementary students engaged in one of two civil engineering units were analyzed using methods borrowed from psychology, anthropology, and sociolinguistics to investigate: 1) the nature of failure in elementary engineering design; 2) the ways in which teachers react to failure; and 3) how the collective actions of students and teachers support or constrain improvement in engineering design. I propose new ways of considering the types and causes of failure, and note three teacher reactions to failure: the manager, the cheerleader, and the strategic partner. Because the goal of iteration in engineering is improvement, I also studied improvement. Students only systematically improve when they have the opportunity, productive strategies, and fair comparisons between prototypes. I then investigate the use of student engineering journals to assess learning from the process of improvement after failure. After discussion, I consider implications from this work as well as future research to advance our understanding in this area.

40 CFR 52.1169 - Stack height review.

Code of Federal Regulations, 2010 CFR

2010-07-01

....1169 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED... limitations have been affected by stack height credits greater than good engineering practice or any other... under the Massachusetts SIP and our delegated PSD authority, the Department of Environmental Quality...

Combined Engineering Education Based on Regional Needs Aiming for Design Education

NASA Astrophysics Data System (ADS)

Hama, Katsumi; Yaegashi, Kosuke; Kobayashi, Junya

The importance of design education that cultivates integrated competences has been suggested in higher educational institutions in fields of engineering in relation to quality assurance of engineering education. However, it is also pointed out to lay stress on cooperative education in collaboration with the community because there is a limit to correspond to the design education only by a group of educational institutions. This paper reports the outline of the practical engineering education, which is executing in the project learning of Hakodate National College of Technology, based on regional needs and the result of the activity as a model of education program for fusion and combination.

SAGA: A project to automate the management of software production systems

NASA Technical Reports Server (NTRS)

Campbell, Roy H.; Beckman-Davies, C. S.; Benzinger, L.; Beshers, G.; Laliberte, D.; Render, H.; Sum, R.; Smith, W.; Terwilliger, R.

1986-01-01

Research into software development is required to reduce its production cost and to improve its quality. Modern software systems, such as the embedded software required for NASA's space station initiative, stretch current software engineering techniques. The requirements to build large, reliable, and maintainable software systems increases with time. Much theoretical and practical research is in progress to improve software engineering techniques. One such technique is to build a software system or environment which directly supports the software engineering process, i.e., the SAGA project, comprising the research necessary to design and build a software development which automates the software engineering process. Progress under SAGA is described.

A Theory of Information Quality and a Framework for its Implementation in the Requirements Engineering Process

NASA Astrophysics Data System (ADS)

Grenn, Michael W.

This dissertation introduces a theory of information quality to explain macroscopic behavior observed in the systems engineering process. The theory extends principles of Shannon's mathematical theory of communication [1948] and statistical mechanics to information development processes concerned with the flow, transformation, and meaning of information. The meaning of requirements information in the systems engineering context is estimated or measured in terms of the cumulative requirements quality Q which corresponds to the distribution of the requirements among the available quality levels. The requirements entropy framework (REF) implements the theory to address the requirements engineering problem. The REF defines the relationship between requirements changes, requirements volatility, requirements quality, requirements entropy and uncertainty, and engineering effort. The REF is evaluated via simulation experiments to assess its practical utility as a new method for measuring, monitoring and predicting requirements trends and engineering effort at any given time in the process. The REF treats the requirements engineering process as an open system in which the requirements are discrete information entities that transition from initial states of high entropy, disorder and uncertainty toward the desired state of minimum entropy as engineering effort is input and requirements increase in quality. The distribution of the total number of requirements R among the N discrete quality levels is determined by the number of defined quality attributes accumulated by R at any given time. Quantum statistics are used to estimate the number of possibilities P for arranging R among the available quality levels. The requirements entropy H R is estimated using R, N and P by extending principles of information theory and statistical mechanics to the requirements engineering process. The information I increases as HR and uncertainty decrease, and the change in information AI needed to reach the desired state of quality is estimated from the perspective of the receiver. The HR may increase, decrease or remain steady depending on the degree to which additions, deletions and revisions impact the distribution of R among the quality levels. Current requirements trend metrics generally treat additions, deletions and revisions the same and simply measure the quantity of these changes over time. The REF evaluates the quantity of requirements changes over time, distinguishes between their positive and negative effects by calculating their impact on HR, Q, and AI, and forecasts when the desired state will be reached, enabling more accurate assessment of the status and progress of the requirements engineering effort. Results from random variable simulations suggest the REF is an improved leading indicator of requirements trends that can be readily combined with current methods. The increase in I, or decrease in H R and uncertainty, is proportional to the engineering effort E input into the requirements engineering process. The REF estimates the AE needed to transition R from their current state of quality to the desired end state or some other interim state of interest. Simulation results are compared with measured engineering effort data for Department of Defense programs published in the SE literature, and the results suggest the REF is a promising new method for estimation of AE.

Creating Learning Environment Connecting Engineering Design and 3D Printing

NASA Astrophysics Data System (ADS)

Pikkarainen, Ari; Salminen, Antti; Piili, Heidi

Engineering education in modern days require continuous development in didactics, pedagogics and used practical methods. 3D printing provides excellent opportunity to connect different engineering areas into practice and produce learning by doing applications. The 3D-printing technology used in this study is FDM (Fused deposition modeling). FDM is the most used 3D-printing technology by commercial numbers at the moment and the qualities of the technology makes it popular especially in academic environments. For achieving the best result possible, students will incorporate the principles of DFAM (Design for additive manufacturing) into their engineering design studies together with 3D printing. This paper presents a plan for creating learning environment for mechanical engineering students combining the aspects of engineering design, 3D-CAD learning and AM (additive manufacturing). As a result, process charts for carrying out the 3D printing process from technological point of view and design process for AM from engineering design point of view were created. These charts are used in engineering design education. The learning environment is developed to work also as a platform for Bachelor theses, work-training environment for students, prototyping service centre for cooperation partners and source of information for mechanical engineering education in Lapland University of Applied Sciences.

SWiFT Software Quality Assurance Plan.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berg, Jonathan Charles

This document describes the software development practice areas and processes which contribute to the ability of SWiFT software developers to provide quality software. These processes are designed to satisfy the requirements set forth by the Sandia Software Quality Assurance Program (SSQAP). APPROVALS SWiFT Software Quality Assurance Plan (SAND2016-0765) approved by: Department Manager SWiFT Site Lead Dave Minster (6121) Date Jonathan White (6121) Date SWiFT Controls Engineer Jonathan Berg (6121) Date CHANGE HISTORY Issue Date Originator(s) Description A 2016/01/27 Jon Berg (06121) Initial release of the SWiFT Software Quality Assurance Plan

Multicriteria Gain Tuning for Rotorcraft Flight Controls (also entitled The Development of the Conduit Advanced Control System Design and Evaluation Interface with a Case Study Application Fly by Wire Helicopter Design)

NASA Technical Reports Server (NTRS)

Biezad, Daniel

1997-01-01

Handling qualities analysis and control law design would seem to be naturally complimenting components of aircraft flight control system design, however these two closely coupled disciplines are often not well integrated in practice. Handling qualities engineers and control system engineers may work in separate groups within an aircraft company. Flight control system engineers and handling quality specialists may come from different backgrounds and schooling and are often not aware of the other group's research. Thus while the handling qualities specifications represent desired aircraft response characteristics, these are rarely incorporated directly in the control system design process. Instead modem control system design techniques are based on servo-loop robustness specifications, and simple representations of the desired control response. Comprehensive handling qualities analysis is often left until the end of the design cycle and performed as a check of the completed design for satisfactory performance. This can lead to costly redesign or less than satisfactory aircraft handling qualities when the flight testing phase is reached. The desire to integrate the fields of handling qualities and flight,control systems led to the development of the CONDUIT system. This tool facilitates control system designs that achieve desired handling quality requirements and servo-loop specifications in a single design process. With CONDUIT, the control system engineer is now able to directly design and control systems to meet the complete handling specifications. CONDUIT allows the designer to retain a preferred control law structure, but then tunes the system parameters to meet the handling quality requirements.

Project-based teaching in health informatics: a course on health care quality improvement.

PubMed

Moehr, J R; Berenji, G R; Green, C J; Kagolovsky, Y

2001-01-01

Teaching the skills and knowledge required in health informatics [1] is a challenge because the skill of applying knowledge in real life requires practice. We relate the experience with introducing a practice component to a course in "Health Care Quality Improvement". Working health care professionals were invited to bring an actual quality problem from their place of work and to work alongside students in running the problem through a quality improvement project lifecycle. Multiple technological and process oriented teaching innovations were employed including project sessions in observation rooms, video recording of these sessions, generation of demonstration examples and distance education components. Both students and their collaborators from the work place developed proficiency in applying quality improvement methods as well as in experiencing the realities of group processes, information gaps and organizational constraints. The principles used to achieve high involvement of the whole class, the employed resources and technical support are described. The resulting academic and practical achievements are discussed in relation to the alternative instructional modalities, and with respect to didactic implications for similar endeavors and beyond to other fields such as systems engineering.

An Annotated Reading List for Concurrent Engineering

DTIC Science & Technology

1989-07-01

The seven tools are sometimes referred to as the seven old tools.) -9- Ishikawa , Kaoru , What is Total Quality Control? The Japanese Way, Prentice-Hall...some solutions. * Ishikawa (1982) presents a practical guide (with easy to use tools) for implementing qual- ity control at the working level...study of, :-, ieering for the last two years. Is..ikawa, Kaoru , Guide to Quality Control, Kraus International Publications, White Plains, NY, 1982. The

A Study of Technical Engineering Peer Reviews at NASA

NASA Technical Reports Server (NTRS)

Chao, Lawrence P.; Tumer, Irem Y.; Bell, David G.

2003-01-01

This report describes the state of practices of design reviews at NASA and research into what can be done to improve peer review practices. There are many types of reviews at NASA: required and not, formalized and informal, programmatic and technical. Standing project formal reviews such as the Preliminary Design Review and Critical Design Review are a required part of every project and mission development. However, the technical, engineering peer reviews that support teams' work on such projects are informal, some times ad hoc, and inconsistent across the organization. The goal of this work is to identify best practices and lessons learned from NASA's experience, supported by academic research and methodologies to ultimately improve the process. This research has determined that the organization, composition, scope, and approach of the reviews impact their success. Failure Modes and Effects Analysis (FMEA) can identify key areas of concern before or in the reviews. Product definition tools like the Project Priority Matrix, engineering-focused Customer Value Chain Analysis (CVCA), and project or system-based Quality Function Deployment (QFD) help prioritize resources in reviews. The use of information technology and structured design methodologies can strengthen the engineering peer review process to help NASA work towards error-proofing the design process.

Failure mode analysis to predict product reliability.

NASA Technical Reports Server (NTRS)

Zemanick, P. P.

1972-01-01

The failure mode analysis (FMA) is described as a design tool to predict and improve product reliability. The objectives of the failure mode analysis are presented as they influence component design, configuration selection, the product test program, the quality assurance plan, and engineering analysis priorities. The detailed mechanics of performing a failure mode analysis are discussed, including one suggested format. Some practical difficulties of implementation are indicated, drawn from experience with preparing FMAs on the nuclear rocket engine program.

Examination of Various Methods Used in Support of Concurrent Engineering

DTIC Science & Technology

1990-03-01

1989. F.Y.I. Drawing a2Ther Productivity. Industrial Engineering 21: 80. Ishi82 Ishikawa , Kaoru . 1982. Guide to Quality Control. White Plains, NY: Kraus...observe it in practice have an easier time identifying the different methods or tech- niques (such as the Ishikawa tools) used than understanding the...simple histogram to show what prob- lems should be attacked first. Cause and Effect Diagrams Sometimes called the fishbone or Ishikawa diagrams-a kind

Software engineering project management - A state-of-the-art report

NASA Technical Reports Server (NTRS)

Thayer, R. H.; Lehman, J. H.

1977-01-01

The management of software engineering projects in the aerospace industry was investigated. The survey assessed such features as contract type, specification preparation techniques, software documentation required by customers, planning and cost-estimating, quality control, the use of advanced program practices, software tools and test procedures, the education levels of project managers, programmers and analysts, work assignment, automatic software monitoring capabilities, design and coding reviews, production times, success rates, and organizational structure of the projects.

Investigation of near-surface chemical, physical and mechanical properties of silicon carbide crystals and fibers modified by ion implantation

NASA Astrophysics Data System (ADS)

Spitznagel, J. A.; Wood, Susan

1988-08-01

The Software Engineering institute is a federally funded research and development center sponsored by the Department of Defense (DOD). It was chartered by the Undersecretary of Defense for Research and Engineering on June 15, 1984. The SEI was established and is operated by Carnegie Mellon University (CUM) under contract F19628-C-0003, which was competitively awarded on December 28, 1984, by the Air Force Electronic Systems Division. The mission of the SEI is to provide the means to bring the ablest minds and the most effective technology to bear on the rapid improvement of the quality of operational software in mission-critical computer systems; to accelerate the reduction to practice of modern software engineering techniques and methods; to promulgate the use of modern techniques and methods throughout the mission-critical systems community; and to establish standards of excellence for the practice of software engineering. This report provides a summary of the programs and projects, staff, facilities, and service accomplishments of the Software Engineering Institute during 1987.

40 CFR 52.2420 - Identification of plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Enforceable, Implementation Plan, Potential to Emit, State Enforceable, Volatile Organic Compound 4/1/96 3/12..., Regulation of the Board, These regulations. Terms Revised—Good Engineering Practice, Person, Volatile organic... pressure, Vapor pressure, Volatile organic compounds. Terms Removed: Air Quality Maintenance Area. 5-10-20...

Exploring Pair Programming Benefits for MIS Majors

ERIC Educational Resources Information Center

Dongo, Tendai; Reed, April H.; O'Hara, Margaret

2016-01-01

Pair programming is a collaborative programming practice that places participants in dyads, working in tandem at one computer to complete programming assignments. Pair programming studies with Computer Science (CS) and Software Engineering (SE) majors have identified benefits such as technical productivity, program/design quality, academic…

Japanese style total quality control: A first hand experience

NASA Astrophysics Data System (ADS)

Cook, S. C.

1991-11-01

The scope, concepts and practices of Total Quality Control (TQC) as operated in Japan today are described. The following mechanisms and elements are introduced: policy deployment, cross functional management, small group activities, suggestion systems, standardization, the TQC promotion department, and TQC education. It is shown on a practical level, how TQC operates in the research and engineering divisions of the aeroengine and space operation at Ishikawajima Harima Industries in Japan. Japanese style TQC is a well developed, well promoted, well structured, common approach to achieving customer satisfaction through continuous improvements. Furthermore, TQC itself is being continuously improved with the Japanese still refining, extending, and developing TQC.

Knowledge translation in rehabilitation engineering research and development: a knowledge ecosystem framework.

PubMed

Chau, Tom; Moghimi, Saba; Popovic, Milos R

2013-01-01

Rehabilitation engineering is concerned with technology innovations and technology-mediated treatments for the improvement of quality of care and quality of life of individuals with disability. Unlike many other fields of health research, the knowledge translation (KT) cycle of rehabilitation engineering research and development (R&D) is often considered incomplete until a technology product or technology-facilitated therapy is available to target clientele. As such, the KT journey of rehabilitation engineering R&D is extremely challenging, necessarily involving knowledge exchange among numerous players across multiple sectors. In this article, we draw on recent literature about the knowledge trichotomy in technology-based rehabilitation R&D and propose a knowledge ecosystem to frame the rehabilitation engineering KT process from need to product. Identifying the principal process of the ecosystem as one of knowledge flow, we elucidate the roles of repository and networked knowledge, identify key consumers and producers in a trinity of communities of practice, and draw on knowledge management literature to describe different knowledge flows. The article concludes with instantiations of this knowledge ecosystem for 2 local rehabilitation engineering research-development-commercialization endeavors. Copyright © 2013 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Satellite-instrument system engineering best practices and lessons

NASA Astrophysics Data System (ADS)

Schueler, Carl F.

2009-08-01

This paper focuses on system engineering development issues driving satellite remote sensing instrumentation cost and schedule. A key best practice is early assessment of mission and instrumentation requirements priorities driving performance trades among major instrumentation measurements: Radiometry, spatial field of view and image quality, and spectral performance. Key lessons include attention to technology availability and applicability to prioritized requirements, care in applying heritage, approaching fixed-price and cost-plus contracts with appropriate attention to risk, and assessing design options with attention to customer preference as well as design performance, and development cost and schedule. A key element of success either in contract competition or execution is team experience. Perhaps the most crucial aspect of success, however, is thorough requirements analysis and flowdown to specifications driving design performance with sufficient parameter margin to allow for mistakes or oversights - the province of system engineering from design inception to development, test and delivery.

Practical Guide to HVAC for Schools.

ERIC Educational Resources Information Center

ASHRAE Journal, 1998

1998-01-01

Features six articles on heating, ventilation, and air-conditioning systems for schools. Examines how to avoid air temperature complaints when choosing a system; special system features; engineers, indoor air quality, and schools; mechanical systems noise in classrooms; operation and management issues related to design; and details on bids and…

A State Policymaker's STEM Playbook. Promising Practices

ERIC Educational Resources Information Center

Zinth, Jennifer; Goetz, Tami

2016-01-01

Science, technology, engineering and mathematics (STEM) has captured the attention of state policymakers who are concerned about equitable access to high-quality educational experiences and preparing and inspiring students to pursue STEM careers. Yet in many states, STEM policymaking efforts have not achieved their intended return on investment…

Quantity and quality assessment of randomized controlled trials on orthodontic practice in PubMed.

PubMed

Shimada, Tatsuo; Takayama, Hisako; Nakamura, Yoshiki

2010-07-01

To find current high-quality evidence for orthodontic practice within a reasonable time, we tested the performance of a PubMed search. PubMed was searched using publication type randomized controlled trial and medical subject heading term "orthodontics" for articles published between 2003 and 2007. The PubMed search results were compared with those from a hand search of four orthodontic journals to determine the sensitivity of PubMed search. We evaluated the precision of the PubMed search result and assessed the quality of individual randomized controlled trials using the Jadad scale. Sensitivity and precision were 97.46% and 58.12%, respectively. In PubMed, of the 277 articles retrieved, 161 (58.12%) were randomized controlled trials on orthodontic practice, and 115 of the 161 articles (71.42%) were published in four orthodontic journals: American Journal of Orthodontics and Dentofacial Orthopedics, The Angle Orthodontist, the European Journal of Orthodontics, and the Journal of Orthodontics. Assessment by the Jadad scale revealed 60 high-quality randomized controlled trials on orthodontic practice, of which 45 (75%) were published in these four journals. PubMed is a highly desirable search engine for evidence-based orthodontic practice. To stay current and get high-quality evidence, it is reasonable to look through four orthodontic journals: American Journal of Orthodontics and Dentofacial Orthopedics, The Angle Orthodontist, the European Journal of Orthodontics, and the Journal of Orthodontics.

High Reliability Organization and Applicability to the Battlefield to Reduce Errors Associated with Combat Casualty Care

DTIC Science & Technology

2016-06-10

I placed on the search engine: “English language,” “5 years.” Journal categories included core clinical journals , dental journals , MEDLINE, and...Army) AE Adverse event AHRQ Agency for Healthcare Research and Quality AHS Army Health System AMEDD Army Medical Department CPQ Clinical Practice...harm to a patient (Joint Commission 2015). Clinical Quality Management: A systematic, organized , multidisciplinary approach to the ongoing

Engineered Hyporheic Zones as Novel Water Quality Best Management Practice: Flow and Contaminant Attenuation in Constructed Stream Experiments

NASA Astrophysics Data System (ADS)

Herzog, S.; McCray, J. E.; Higgins, C. P.

2015-12-01

The hyporheic zone is a hotspot for biogeochemical processing that can attenuate a variety of nonpoint source contaminants in streamwater. However, hyporheic zones in urban and agricultural streams are often degraded and poorly connected with surface water. In order to increase hyporheic exchange and improve water quality, we introduced engineered streambeds as a stormwater and restoration best management practice. Modifications to streambed hydraulic conductivity and reactivity are termed Biohydrochemical Enhancement structures for Streamwater Treatment (BEST). BEST are subsurface modules that utilize low- and high-permeability sediments to drive efficient hyporheic exchange, and reactive geomedia to increase reaction rates within the hyporheic zone. This work presents the first physical performance data of BEST modules at the pilot scale. BEST modules were installed in a constructed stream facility at the Colorado School of Mines in Golden, CO. This facility features two 15m artificial streams, which included an all sand control condition alongside the BEST test condition. Streams were continuously operated at a discharge of 1 L/s using recycled water. Time-lapse electrical resistivity surveys demonstrated that BEST modules provided substantially greater hyporheic exchange than the control condition. Water quality samples at the hyporheic and reach scales also revealed greater attenuation of nitrogen, coliforms, and select metals and trace organics by BEST modules relative to the control condition. These experimental results were also compared to previous numerical model simulations to evaluate model accuracy. Together, these results show that BEST may be an effective best management practice for improving streamwater quality in urban and agricultural settings.

Stem cell bioprocessing: fundamentals and principles

PubMed Central

Placzek, Mark R.; Chung, I-Ming; Macedo, Hugo M.; Ismail, Siti; Mortera Blanco, Teresa; Lim, Mayasari; Min Cha, Jae; Fauzi, Iliana; Kang, Yunyi; Yeo, David C.L.; Yip Joan Ma, Chi; Polak, Julia M.; Panoskaltsis, Nicki; Mantalaris, Athanasios

2008-01-01

In recent years, the potential of stem cell research for tissue engineering-based therapies and regenerative medicine clinical applications has become well established. In 2006, Chung pioneered the first entire organ transplant using adult stem cells and a scaffold for clinical evaluation. With this a new milestone was achieved, with seven patients with myelomeningocele receiving stem cell-derived bladder transplants resulting in substantial improvements in their quality of life. While a bladder is a relatively simple organ, the breakthrough highlights the incredible benefits that can be gained from the cross-disciplinary nature of tissue engineering and regenerative medicine (TERM) that encompasses stem cell research and stem cell bioprocessing. Unquestionably, the development of bioprocess technologies for the transfer of the current laboratory-based practice of stem cell tissue culture to the clinic as therapeutics necessitates the application of engineering principles and practices to achieve control, reproducibility, automation, validation and safety of the process and the product. The successful translation will require contributions from fundamental research (from developmental biology to the ‘omics’ technologies and advances in immunology) and from existing industrial practice (biologics), especially on automation, quality assurance and regulation. The timely development, integration and execution of various components will be critical—failures of the past (such as in the commercialization of skin equivalents) on marketing, pricing, production and advertising should not be repeated. This review aims to address the principles required for successful stem cell bioprocessing so that they can be applied deftly to clinical applications. PMID:19033137

Stem cell bioprocessing: fundamentals and principles.

PubMed

Placzek, Mark R; Chung, I-Ming; Macedo, Hugo M; Ismail, Siti; Mortera Blanco, Teresa; Lim, Mayasari; Cha, Jae Min; Fauzi, Iliana; Kang, Yunyi; Yeo, David C L; Ma, Chi Yip Joan; Polak, Julia M; Panoskaltsis, Nicki; Mantalaris, Athanasios

2009-03-06

In recent years, the potential of stem cell research for tissue engineering-based therapies and regenerative medicine clinical applications has become well established. In 2006, Chung pioneered the first entire organ transplant using adult stem cells and a scaffold for clinical evaluation. With this a new milestone was achieved, with seven patients with myelomeningocele receiving stem cell-derived bladder transplants resulting in substantial improvements in their quality of life. While a bladder is a relatively simple organ, the breakthrough highlights the incredible benefits that can be gained from the cross-disciplinary nature of tissue engineering and regenerative medicine (TERM) that encompasses stem cell research and stem cell bioprocessing. Unquestionably, the development of bioprocess technologies for the transfer of the current laboratory-based practice of stem cell tissue culture to the clinic as therapeutics necessitates the application of engineering principles and practices to achieve control, reproducibility, automation, validation and safety of the process and the product. The successful translation will require contributions from fundamental research (from developmental biology to the 'omics' technologies and advances in immunology) and from existing industrial practice (biologics), especially on automation, quality assurance and regulation. The timely development, integration and execution of various components will be critical-failures of the past (such as in the commercialization of skin equivalents) on marketing, pricing, production and advertising should not be repeated. This review aims to address the principles required for successful stem cell bioprocessing so that they can be applied deftly to clinical applications.

Accessible engineering drawings for visually impaired machine operators.

PubMed

Ramteke, Deepak; Kansal, Gayatri; Madhab, Benu

2014-01-01

An engineering drawing provides manufacturing information to a machine operator. An operator plans and executes machining operations based on this information. A visually impaired (VI) operator does not have direct access to the drawings. Drawing information is provided to them verbally or by using sample parts. Both methods have limitations that affect the quality of output. Use of engineering drawings is a standard practice for every industry; this hampers employment of a VI operator. Accessible engineering drawings are required to increase both independence, as well as, employability of VI operators. Today, Computer Aided Design (CAD) software is used for making engineering drawings, which are saved in CAD files. Required information is extracted from the CAD files and converted into Braille or voice. The authors of this article propose a method to make engineering drawings information directly accessible to a VI operator.

On the methodology of Engineering Geodesy

NASA Astrophysics Data System (ADS)

Brunner, Fritz K.

2007-09-01

Textbooks on geodetic surveying usually describe a very small number of principles which should provide the foundation of geodetic surveying. Here, the author argues that an applied field, such as engineering geodesy, has a methodology as foundation rather than a few principles. Ten methodological elements (ME) are identified: (1) Point discretisation of natural surfaces and objects, (2) distinction between coordinate and observation domain, (3) definition of reference systems, (4) specification of unknown parameters and desired precisions, (5) geodetic network and observation design, (6) quality control of equipment, (7) quality control of measurements, (8) establishment of measurement models, (9) establishment of parameter estimation models, (10) quality control of results. Each ME consists of a suite of theoretical developments, geodetic techniques and calculation procedures, which will be discussed. This paper is to be considered a first attempt at identifying the specific elements of the methodology of engineering geodesy. A better understanding of this methodology could lead to an increased objectivity, to a transformation of subjective practical experiences into objective working methods, and consequently to a new structure for teaching this rather diverse subject.

EFFECTS OF LIME AMENDMENT ON THE PH OF ENGINEERED SOIL MIX FOR THE PURPOSES OF BIORETENTION

EPA Science Inventory

Bioretention basins are currently at the forefront of federal and state initiatives for urban stormwater management and water quality control. Also known as raingardens, these systems have been included in U.S. EPA’s list urban stormwater best management practices (BMPs). A bio...

40 CFR 52.2565 - Original identification of plan.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Amended Regulations VI and VII, and an Identification and Analysis of the Impact of the 1979 West Virginia... State of West Virginia on November 4, 1983 which establishes an Ambient Air Quality Monitoring Network...) Revision to the State implementation plan consisting of a good engineering practice (GEP) for stack heights...

40 CFR 52.2565 - Original identification of plan.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Amended Regulations VI and VII, and an Identification and Analysis of the Impact of the 1979 West Virginia... State of West Virginia on November 4, 1983 which establishes an Ambient Air Quality Monitoring Network...) Revision to the State implementation plan consisting of a good engineering practice (GEP) for stack heights...

40 CFR 52.2565 - Original identification of plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Amended Regulations VI and VII, and an Identification and Analysis of the Impact of the 1979 West Virginia... State of West Virginia on November 4, 1983 which establishes an Ambient Air Quality Monitoring Network...) Revision to the State implementation plan consisting of a good engineering practice (GEP) for stack heights...

40 CFR 52.2565 - Original identification of plan.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Amended Regulations VI and VII, and an Identification and Analysis of the Impact of the 1979 West Virginia... State of West Virginia on November 4, 1983 which establishes an Ambient Air Quality Monitoring Network...) Revision to the State implementation plan consisting of a good engineering practice (GEP) for stack heights...

47 CFR 76.62 - Manner of carriage.

Code of Federal Regulations, 2010 CFR

2010-10-01

... provided in § 76.64. (b) Each digital television broadcast signal carried shall be carried without material... engineering practice, be provided no less than the same quality of signal processing and carriage provided for... handicapped persons or for educational or language purposes. (g) With respect to carriage of digital signals...

Bioenvironmental Engineer’s Guide to Indoor Air Quality Surveys

DTIC Science & Technology

2014-09-01

housekeeping practices •Fresh air intake located near contaminant source •Check for sewer line leak, septic tank leak, fuel tank leaks...make-up air •Dirty coils/filters •Sewer gas, drain traps, sanitary vents •Leaky tanks , spills •Cleaning products, pesticides •Poor

Examining the Quality of Technology Implementation in STEM Classrooms: Demonstration of an Evaluative Framework

ERIC Educational Resources Information Center

Parker, Caroline E.; Stylinski, Cathlyn D.; Bonney, Christina R.; Schillaci, Rebecca; McAuliffe, Carla

2015-01-01

Technology applications aligned with science, technology, engineering, and math (STEM) workplace practices can engage students in real-world pursuits but also present dramatic challenges for classroom implementation. We examined the impact of teacher professional development focused on incorporating these workplace technologies in the classroom.…

ClassCompass: A Software Design Mentoring System

ERIC Educational Resources Information Center

Coelho, Wesley; Murphy, Gail

2007-01-01

Becoming a quality software developer requires practice under the guidance of an expert mentor. Unfortunately, in most academic environments, there are not enough experts to provide any significant design mentoring for software engineering students. To address this problem, we present a collaborative software design tool intended to maximize an…

Insights into STEM Education Praxis: An Assessment Scheme for Course Syllabi

ERIC Educational Resources Information Center

Corlu, M. Sencer

2013-01-01

Post-secondary institutions within the European Higher Education Area have been adapting quality assurance mechanisms for course design, delivery, and evaluation following a learner-centered approach. The purpose of this exploratory study was to delineate the teaching practices in science, technology, engineering, and mathematics at the…

Area navigation implementation for a microcomputer-based LORAN-C receiver

NASA Technical Reports Server (NTRS)

Oguri, F.

1983-01-01

Engineering performed to make LORAN-C a more useful and practical navigation system for general aviation is described. Development of new software, and implementation of this software on a (MOS6502) microcomputer to provide high quality practical area navigation information directly to the pilot and considered. Flight tests were performed specifically to examine the efficacy of this new software. Final results were exceptionally good and clearly demonstrate the merits of this new LORAN-C area navigation system.

Implementing resilience engineering for healthcare quality improvement using the CARE model: a feasibility study protocol.

PubMed

Anderson, J E; Ross, A J; Back, J; Duncan, M; Snell, P; Walsh, K; Jaye, P

2016-01-01

Resilience engineering (RE) is an emerging perspective on safety in complex adaptive systems that emphasises how outcomes emerge from the complexity of the clinical environment. Complexity creates the need for flexible adaptation to achieve outcomes. RE focuses on understanding the nature of adaptations, learning from success and increasing adaptive capacity. Although the philosophy is clear, progress in applying the ideas to quality improvement has been slow. The aim of this study is to test the feasibility of translating RE concepts into practical methods to improve quality by designing, implementing and evaluating interventions based on RE theory. The CARE model operationalises the key concepts and their relationships to guide the empirical investigation. The settings are the Emergency Department and the Older Person's Unit in a large London teaching hospital. Phases 1 and 2 of our work, leading to the development of interventions to improve the quality of care, are described in this paper. Ethical approval has been granted for these phases. Phase 1 will use ethnographic methods, including observation of work practices and interviews with staff, to understand adaptations and outcomes. The findings will be used to collaboratively design, with clinical staff in interactive design workshops, interventions to improve the quality of care. The evaluation phase will be designed and submitted for ethical approval when the outcomes of phases 1 and 2 are known. Study outcomes will be knowledge about the feasibility of applying RE to improve quality, the development of RE theory and a validated model of resilience in clinical work which can be used to guide other applications. Tools, methods and practical guidance for practitioners will also be produced, as well as specific knowledge of the potential effectiveness of the implemented interventions in emergency and older people's care. Further studies to test the application of RE at a larger scale will be required, including studies of other healthcare settings, organisational contexts and different interventions.

The experiences of women engineers who have completed one to five years of professional engineering employment: A phenomenological study

NASA Astrophysics Data System (ADS)

White, Susan M.

Women engineers remain underrepresented in employment in engineering fields in the United States. Feminist theory views this gender disparity beyond equity in numbers for women engineers and looks at structural issues of women's access, opportunities, and quality of experience in the workplace. Research on women's success and persistence in engineering education is diverse; however, there are few studies that focus on the early years of women's careers in engineering and less using a phenomenological research design. Experiences of women engineers who have completed one to five years of professional engineering employment are presented using a phenomenological research design. Research questions explored the individual and composite experiences for the co-researchers of the study as well as challenges and advantages of the phenomenon of having completed one to five years of professional engineering employment. Themes that emanated from the data were a feeling that engineering is a positive profession, liking math and science from an early age, having experiences of attending math and science camps or learning and practicing engineering interests with their fathers for some co-researchers. Other themes included a feeling of being different as a woman in the engineering workplace, taking advantage of opportunities for training, education, and advancement to further their careers, and the role of informal and formal mentoring in developing workplace networks and engineering expertise. Co-researchers negotiated issues of management quality and support, experiences of gender discrimination in the workplace, and having to make decisions balancing their careers and family responsibilities. Finally, the women engineers for this research study expressed intentions to persist in their careers while pursuing expertise and experience in their individual engineering fields.

Explore-create-share study: An evaluation of teachers as curriculum innovators in engineering education

NASA Astrophysics Data System (ADS)

Berry, Ayora

The purpose of this study was to investigate the effects of a curriculum design-based (CDB) professional development model on K-12 teachers' capacity to integrate engineering education in the classroom. This teacher professional development approach differs from other training programs where teachers learn how to use a standard curriculum and adopt it in their classrooms. In a CDB professional development model teachers actively design lessons, student resources, and assessments for their classroom instruction. In other science, technology, engineering and mathematics (STEM) disciplines, CDB professional development has been reported to (a) position teachers as architects of change, (b) provide a professional learning vehicle for educators to reflect on instructional practices and develop content knowledge, (c) inspire a sense of ownership in curriculum decision-making among teachers, and (d) use an instructional approach that is coherent with teachers' interests and professional goals. The CDB professional development program in this study used the Explore-Create-Share (ECS) framework as an instructional model to support teacher-led curriculum design and implementation. To evaluate the impact of the CDB professional development and associated ECS instructional model, three research studies were conducted. In each study, the participants completed a six-month CDB professional development program, the PTC STEM Certificate Program, that included sixty-two instructional contact hours. Participants learned about industry and education engineering concepts, tested engineering curricula, collaborated with K-12 educators and industry professionals, and developed project-based engineering curricula using the ECS framework. The first study evaluated the impact of the CDB professional development program on teachers' engineering knowledge, self-efficacy in designing engineering curriculum, and instructional practice in developing project-based engineering units. The study included twenty-six teachers and data was collected pre-, mid-, and post-program using teacher surveys and a curriculum analysis instrument. The second study evaluated teachers' perceptions of the ECS model as a curriculum authoring tool and the quality of the curriculum units they developed. The study included sixty-two participants and data was collected post-program using teacher surveys and a curriculum analysis instrument. The third study evaluated teachers' experiences implementing ECS units in the classroom with a focus on identifying the benefits, challenges and solutions associated with project-based engineering in the classroom. The study included thirty-one participants and data was collected using an open-ended survey instrument after teachers completed implementation of the ECS curriculum unit. Results of these three studies indicate that teachers can be prepared to integrate engineering in the classroom using a CDB professional development model. Teachers reported an increase in engineering content knowledge, improved their self-efficacy in curriculum planning, and developed high quality instructional units that were aligned to engineering design practices and STEM educational standards. The ECS instructional model was acknowledged as a valuable tool for developing and implementing engineering education in the classroom. Teachers reported that ECS curriculum design aligned with their teaching goals, provided a framework to integrate engineering with other subject-area concepts, and incorporated innovative teaching strategies. After implementing ECS units in the classroom, teachers reported that the ECS model engaged students in engineering design challenges that were situated in a real world context and required the application of interdisciplinary content knowledge and skills. Teachers also reported a number of challenges related to scheduling, content alignment, and access to resources. In the face of these obstacles, teachers presented a number of solutions that included optimization of one's teaching practice, being resource savvy, and adopting a growth mindset.

Metabolic Engineering VII Conference

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kevin Korpics

The aims of this Metabolic Engineering conference are to provide a forum for academic and industrial researchers in the field; to bring together the different scientific disciplines that contribute to the design, analysis and optimization of metabolic pathways; and to explore the role of Metabolic Engineering in the areas of health and sustainability. Presentations, both written and oral, panel discussions, and workshops will focus on both applications and techniques used for pathway engineering. Various applications including bioenergy, industrial chemicals and materials, drug targets, health, agriculture, and nutrition will be discussed. Workshops focused on technology development for mathematical and experimental techniquesmore » important for metabolic engineering applications will be held for more in depth discussion. This 2008 meeting will celebrate our conference tradition of high quality and relevance to both industrial and academic participants, with topics ranging from the frontiers of fundamental science to the practical aspects of metabolic engineering.« less

Comparative analysis of structural concrete quality assurance practices on nine nuclear power plant construction projects. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Willenbrock, J.H.; Thomas, H.R. Jr.; Burati, J.L. Jr.

1978-06-01

The basic objective of this research effort was to perform a comparative analysis of the Quality Assurance practices related to the structural concrete phase on nine nuclear power plant projects which are (or have been) under construction in the United States in the past ten years. This analysis identified the response of each Quality Assurance program to the applicable criteria of 10 CFR Part 50, Appendix B as well as to the pertinent regulatory requirements and industry standards. The major emphasis was placed on the construction aspects of the structural concrete phase of each project. The engineering and design aspectsmore » were examined whenever they interfaced with the construction aspects. For those aspects of the Quality Assurance system which can be considered managerial in nature (i.e., organizational relationships, types of Quality Assurance programs, corrective action procedures, etc.) an attempt has been made to present the alternative approaches that were identified. For those aspects of the Quality Assurance system which are technical in nature (i.e., the frequency of testing for slump, compressive strength, etc.) an attempt has been made to present a comparative analysis between projects and in relation to the recommended or mandated practices presented in the appropriate industry codes and standards.« less

Reengineering Framework for Systems in Education

ERIC Educational Resources Information Center

Choquet, Christophe; Corbiere, Alain

2006-01-01

Specifications recently proposed as standards in the domain of Technology Enhanced Learning (TEL), question the designers of TEL systems on how to put them into practice. Recent studies in Model Driven Engineering have highlighted the need for a framework which could formalize the use of these specifications as well as enhance the quality of the…

Best Practices Case Study: Tommy Williams Homes -Gainesville, FL

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2011-04-01

Case study of Tommy Williams Homes who has continued to outsell the competition with sales increasing despite the recession thanks to a systems-engineering approach developed with DOE’s Building America that yields high energy efficiency, comfort, and indoor air quality. The company offers to pay buyers’ energy bills for the first year.

Aligning Practice to Policies: Changing the Culture to Recognize and Reward Teaching at Research Universities

ERIC Educational Resources Information Center

Dennin, Michael; Schultz, Zachary D.; Feig, Andrew; Finkelstein, Noah; Greenhoot, Andrea Follmer; Hildreth, Michael; Leibovich, Adam K.; Martin, James D.; Moldwin, Mark B.; O'Dowd, Diane K.; Posey, Lynmarie A.; Smith, Tobin L.; Miller, Emily R.

2017-01-01

Recent calls for improvement in undergraduate education within STEM (science, technology, engineering, and mathematics) disciplines are hampered by the methods used to evaluate teaching effectiveness. Faculty members at research universities are commonly assessed and promoted mainly on the basis of research success. To improve the quality of…

Analysis on Key Points of Construction and Management of Municipal Landscape Engineering

NASA Astrophysics Data System (ADS)

Liang, Mingxia; Fei, Cheng

2018-02-01

At present, China has made great efforts to promote the construction of ecological civilization and promote the development of ecological protection and environmental construction. It has important practical significance to maintain the ecological balance and environmental quality of our country. Especially with the gradual improvement in people’s awareness of environmental protection, so that the green of the city also put forward higher requirements at the same time with the rising of the level of urbanization. In the process of urban landscape construction, the rational planning of urban landscaping involves a lot of subject knowledge. In the green process, we should fully consider the system of urban development and construction in China, based on the design of urban development and long-term planning of the landscaping project. In addition, we must also consider the traditional layout of the city area and the physical and geographical situation and so on, to enhance the objective and scientific nature of urban landscape. Therefore, it is of great practical significance to ensure the quality of landscaping in the effective management of municipal landscape engineering.

NGSS and the Next Generation of Science Teachers

NASA Astrophysics Data System (ADS)

Bybee, Rodger W.

2014-03-01

This article centers on the Next Generation Science Standards (NGSS) and their implications for teacher development, particularly at the undergraduate level. After an introduction to NGSS and the influence of standards in the educational system, the article addresses specific educational shifts—interconnecting science and engineering practices, disciplinary core ideas, crosscutting concepts; recognizing learning progressions; including engineering; addressing the nature of science, coordinating with Common Core State Standards. The article continues with a general discussion of reforming teacher education programs and a concluding discussion of basic competencies and personal qualities of effective science teachers.

Sharing best practices in teaching biomedical engineering design.

PubMed

Allen, R H; Acharya, S; Jancuk, C; Shoukas, A A

2013-09-01

In an effort to share best practices in undergraduate engineering design education, we describe the origin, evolution and the current status of the undergraduate biomedical engineering design team program at Johns Hopkins University. Specifically, we describe the program and judge the quality of the pedagogy by relating it to sponsor feedback, project outcomes, external recognition and student satisfaction. The general pedagogic practices, some of which are unique to Hopkins, that have worked best include: (1) having a hierarchical team structure, selecting team leaders the Spring semester prior to the academic year, and empowering them to develop and manage their teams, (2) incorporating a longitudinal component that incudes freshmen as part of the team, (3) having each team choose from among pre-screened clinical problems, (4) developing relationships and fostering medical faculty, industry and government to allow students access to engineers, clinicians and clinical environments as needed, (5) providing didactic sessions on topics related to requirements for the next presentation, (6) employing judges from engineering, medicine, industry and government to evaluate designs and provide constructive criticisms approximately once every 3-4 weeks and (7) requiring students to test the efficacy of their designs. Institutional support and resources are crucial for the design program to flourish. Most importantly, our willingness and flexibility to change the program each year based on feedback from students, sponsors, outcomes and judges provides a mechanism for us to test new approaches and continue or modify those that work well, and eliminate those that did not.

Leveraging annotation-based modeling with Jump.

PubMed

Bergmayr, Alexander; Grossniklaus, Michael; Wimmer, Manuel; Kappel, Gerti

2018-01-01

The capability of UML profiles to serve as annotation mechanism has been recognized in both research and industry. Today's modeling tools offer profiles specific to platforms, such as Java, as they facilitate model-based engineering approaches. However, considering the large number of possible annotations in Java, manually developing the corresponding profiles would only be achievable by huge development and maintenance efforts. Thus, leveraging annotation-based modeling requires an automated approach capable of generating platform-specific profiles from Java libraries. To address this challenge, we present the fully automated transformation chain realized by Jump, thereby continuing existing mapping efforts between Java and UML by emphasizing on annotations and profiles. The evaluation of Jump shows that it scales for large Java libraries and generates profiles of equal or even improved quality compared to profiles currently used in practice. Furthermore, we demonstrate the practical value of Jump by contributing profiles that facilitate reverse engineering and forward engineering processes for the Java platform by applying it to a modernization scenario.

Advanced interdisciplinary undergraduate program: light engineering

NASA Astrophysics Data System (ADS)

Bakholdin, Alexey; Bougrov, Vladislav; Voznesenskaya, Anna; Ezhova, Kseniia

2016-09-01

The undergraduate educational program "Light Engineering" of an advanced level of studies is focused on development of scientific learning outcomes and training of professionals, whose activities are in the interdisciplinary fields of Optical engineering and Technical physics. The program gives practical experience in transmission, reception, storage, processing and displaying information using opto-electronic devices, automation of optical systems design, computer image modeling, automated quality control and characterization of optical devices. The program is implemented in accordance with Educational standards of the ITMO University. The specific features of the Program is practice- and problem-based learning implemented by engaging students to perform research and projects, internships at the enterprises and in leading Russian and international research educational centers. The modular structure of the Program and a significant proportion of variable disciplines provide the concept of individual learning for each student. Learning outcomes of the program's graduates include theoretical knowledge and skills in natural science and core professional disciplines, deep knowledge of modern computer technologies, research expertise, design skills, optical and optoelectronic systems and devices.

The NASA Software Research Infusion Initiative: Successful Technology Transfer for Software Assurance

NASA Technical Reports Server (NTRS)

Hinchey, Michael G.; Pressburger, Thomas; Markosian, Lawrence; Feather, Martin S.

2006-01-01

New processes, methods and tools are constantly appearing in the field of software engineering. Many of these augur great potential in improving software development processes, resulting in higher quality software with greater levels of assurance. However, there are a number of obstacles that impede their infusion into software development practices. These are the recurring obstacles common to many forms of research. Practitioners cannot readily identify the emerging techniques that may most benefit them, and cannot afford to risk time and effort in evaluating and experimenting with them while there is still uncertainty about whether they will have payoff in this particular context. Similarly, researchers cannot readily identify those practitioners whose problems would be amenable to their techniques and lack the feedback from practical applications necessary to help them to evolve their techniques to make them more likely to be successful. This paper describes an ongoing effort conducted by a software engineering research infusion team, and the NASA Research Infusion Initiative, established by NASA s Software Engineering Initiative, to overcome these obstacles.

Engineering Geodesy - Definition and Core Competencies

NASA Astrophysics Data System (ADS)

Kuhlmann, Heiner; Schwieger, Volker; Wieser, Andreas; Niemeier, Wolfgang

2014-11-01

This article summarises discussions concerning the definition of "engineering geodesy" within the German Geodetic Commission. It is noted that engineering geodesy by means of its tasks, methods and characteristics is an application-oriented science whose research questions often arise from observed phenomena or from unsolved practical problems. In particular it is characterised by the professional handling of geometry-related problems in a cost-effective manner that includes comprehensive quality assessment at all phases of the problem solution - from planning through measurement to data processing and interpretation. The current methodical developments are primarily characterised by the increasing integration of the measurement and analysis into challenging construction, production and monitoring processes as well as by the transition to spatially continuous methods. A modern definition of engineering geodesy is proposed at the end of this article.

Methods of Interoperability: Moodle and WeBWork

ERIC Educational Resources Information Center

Gage, Michael E.

2017-01-01

The first requirement for an online mathematics homework engine\tis to encourage students to practice and reinforce their mathematics skills in ways that are as good or better than traditional paper homework. The use of the computer and the internet should not limit the kind or quality of the mathematics that we teach and, if possible, it should…

Learning Experiences That Make a Difference: Findings from a National Study of Doctoral Education in the Professions. ASHE Annual Meeting Paper.

ERIC Educational Resources Information Center

Haworth, Jennifer Grant; Bair, Carolyn Richert

The purpose of this study was to explore and develop baseline understandings of the purposes, character (i.e., cultural, teaching/learning, curricular practices), quality, and outcomes associated with doctoral education in four professional fields of study: clinical psychology, electrical engineering, nursing, and school administration. The…

A Design Quality Learning Unit in OO Modeling Bridging the Engineer and the Artist

ERIC Educational Resources Information Center

Waguespack, Leslie J.

2015-01-01

Recent IS curriculum guidelines compress software development pedagogy into smaller and smaller pockets of course syllabi. Where undergraduate IS students once may have practiced modeling in analysis, design, and implementation across six or more courses in a curriculum using a variety of languages and tools they commonly now experience modeling…

Replacing Concrete with Natural and Social Engineering: Learning the Lessons of Stakeholder Engagement from South West Water's Upland Catchment Management Programme

NASA Astrophysics Data System (ADS)

Smith, David; Grand-Clement, Emile; Brazier, Richard

2014-05-01

Replacing Concrete with Natural and Social Engineering: Learning the Lessons of Stakeholder Engagement from South West Water's Upland Catchment Management Programme Smith, D., Grand-Clement, E., Anderson, K., Luscombe, D., G, N., Bratis, Brazier, R.E Peatlands in the South West of the British Isles have been extensively drained for agricultural reclamation and peat cutting. The improvement in food production resulting from this management practice has never clearly been observed. Instead, we are now faced with several detrimental consequences on a whole suite of ecosystem services, such as the delivery of water, water quality, biodiversity and carbon storage. Alongside the direct environmental implications, poor water quality is increasing water treatment costs and will drive significant future investment. As a result, water companies now need to find appropriate solutions to varying water levels and decreasing water quality through catchment management. The Mires Project, the catchment management programme used by South West Water (SWW) is working with a wide range of stakeholders to restore the hydrological functioning of peatlands, and the ecosystem services they provide. This programme is driven by overarching legal requirements (i.e. the water framework directive, Natura 2000), future climate change predictions, corporate responsibility and commercial needs. Post-restoration scientific monitoring is at the heart of the project improving of our understanding of the eco-hydrological and chemical process driving changes in management practice. The challenges faced from the involvement of a wide range of stakeholders will be explored, focusing on the benefits from stakeholder involvement in catchment management and hydrological research, but also considering the difficulties to be overcome. SWW is working with private land-owners, government agencies, local and national park Authorities, community and single interest groups and research institutions to achieve its catchment management objectives. To achieve this it has replaced the traditional water company approach of hard engineering solutions with a mixture of softer natural and social engineering.

German dentists' websites on periodontitis have low quality of information.

PubMed

Schwendicke, Falk; Stange, Jörg; Stange, Claudia; Graetz, Christian

2017-08-02

The internet is an increasingly relevant source of health information. We aimed to assess the quality of German dentists' websites on periodontitis, hypothesizing that it was significantly associated with a number of practice-specific parameters. We searched four electronic search engines and included pages which were freely accessible, posted by a dental practice in Germany, and mentioned periodontal disease/therapy. Websites were assessed for (1) technical and functional aspects, (2) generic quality and risk of bias, (3) disease-specific information. For 1 and 2, validated tools (LIDA/DISCERN) were used for assessment. For 3, we developed a criterion catalogue encompassing items on etiologic and prognostic factors for periodontitis, the diagnostic and treatment process, and the generic chance of tooth retention in periodontitis patients. Inter- and intra-rater reliabilities were largely moderate. Generalized linear modeling was used to assess the association between the information quality (measured as % of maximally available scores) and practice-specific characteristics. Seventy-one websites were included. Technical and functional aspects were reported in significantly higher quality (median: 71%, 25/75th percentiles: 67/79%) than all other aspects (p < 0.05). Generic risk of bias and most disease-specific aspects showed significantly lower reporting quality (median range was 0-40%), with poorest reporting for prognostic factors (9;0/27%), diagnostic process (0;0/33%) and chances of tooth retention (0;0/2%). We found none of the practice-specific parameters to have significant impact on the overall quality of the websites. Most German dentists' websites on periodontitis are not fully trustworthy and relevant information are not or insufficiently considered. There is great need to improve the information quality from such websites at least with regards to periodontitis.

Knowledge-based personalized search engine for the Web-based Human Musculoskeletal System Resources (HMSR) in biomechanics.

PubMed

Dao, Tien Tuan; Hoang, Tuan Nha; Ta, Xuan Hien; Tho, Marie Christine Ho Ba

2013-02-01

Human musculoskeletal system resources of the human body are valuable for the learning and medical purposes. Internet-based information from conventional search engines such as Google or Yahoo cannot response to the need of useful, accurate, reliable and good-quality human musculoskeletal resources related to medical processes, pathological knowledge and practical expertise. In this present work, an advanced knowledge-based personalized search engine was developed. Our search engine was based on a client-server multi-layer multi-agent architecture and the principle of semantic web services to acquire dynamically accurate and reliable HMSR information by a semantic processing and visualization approach. A security-enhanced mechanism was applied to protect the medical information. A multi-agent crawler was implemented to develop a content-based database of HMSR information. A new semantic-based PageRank score with related mathematical formulas were also defined and implemented. As the results, semantic web service descriptions were presented in OWL, WSDL and OWL-S formats. Operational scenarios with related web-based interfaces for personal computers and mobile devices were presented and analyzed. Functional comparison between our knowledge-based search engine, a conventional search engine and a semantic search engine showed the originality and the robustness of our knowledge-based personalized search engine. In fact, our knowledge-based personalized search engine allows different users such as orthopedic patient and experts or healthcare system managers or medical students to access remotely into useful, accurate, reliable and good-quality HMSR information for their learning and medical purposes. Copyright © 2012 Elsevier Inc. All rights reserved.

Software Development Standard Processes (SDSP)

NASA Technical Reports Server (NTRS)

Lavin, Milton L.; Wang, James J.; Morillo, Ronald; Mayer, John T.; Jamshidian, Barzia; Shimizu, Kenneth J.; Wilkinson, Belinda M.; Hihn, Jairus M.; Borgen, Rosana B.; Meyer, Kenneth N.;

MO-F-211-01: Methods for Completing Practice Quality Improvement (PQI).

PubMed

Johnson, J; Brown, K; Ibbott, G; Pawlicki, T

2012-06-01

Practice Quality Improvement (PQI) is becoming an expected part of routine practice in healthcare as an approach to provide more efficient, effective and high quality care. Additionally, as part of the ABR's Maintenance of Certification (MOC) pathway, medical physicists are now expected to complete a PQI project. This session will describe the history behind and benefits of the ABR's MOC program, provide details of quality improvement methods and how to successfully complete a PQI project. PQI methods include various commonly used engineering and management tools. The Plan-Do-Study-Act (PDSA) cycle will be presented as one project planning and implementation tool. Other PQI analysis instruments such as flowcharts, Pareto charts, process control charts and fishbone diagrams will also be explained with examples. Cause analysis, solution development and implementation, and post-implementation measurement will be presented. Project identification and definition as well as appropriate measurement tool selection will be offered. Methods to choose key quality metrics (key quality indicators) will also be addressed. Several sample PQI projects and templates available through the AAPM and other organizations will be described. At least three examples of completed PQI projects will be shared. 1. Identify and define a PQI project 2. Identify and select measurement methods/techniques for use with the PQI project 3. Describe example(s) of completed projects. © 2012 American Association of Physicists in Medicine.

The future in Agricultural Engineering: news degrees in the Universidad Politécnica de Madrid (UPM)

NASA Astrophysics Data System (ADS)

Cartagena, M. Carmen; Tarquis, A. M.; Vázquez, J.; Serrano, A.; Arce, A.

2010-05-01

The Bologna process is to improve the quality of education, mobility, diversity and the competitiveness and involves three fundamental changes: transform of the structure of titles, changing in methods of teaching and implementation of the systems of quality assurance. Engineer Agronomist at the Universidad Politécnica de Madrid (UPM) has been offered as a degree of five years with a total of 400 credits and seven optional orientations: Crop Production, Plant and Breeding Protection, Environment, Agricultural Economics, Animal Production, Rural Engineering and Food Technology. Actually, the Bologna plan creates three new degrees: Engineering and Science Agronomic, Food Engineering and Agro-Environmental Engineering, with 240 ECTS each one of them and with specific professional characteristics. The changes that involve the introduction of these new degrees is perhaps the largest occurred never at the Spanish university system, not only by the drastic transformation in the structure of titles, but also by the new changes that lie ahead in teaching methods. Among others we will comment the following ones: -A year decreased duration of studies and therefore incorporation into the market. - Elimination of the seven current guidelines to create three specific qualifications of degree. -Decrease of optional subjects and increase in credits for the basic subjects. - Inclusion of business practices. - Increase in the number of credits of final project. - Changes in methodologies and a higher involvement of teachers and students in the education.

Teaching practice and effect of the curriculum design and simulation courses under the support of professional optical software

NASA Astrophysics Data System (ADS)

Lin, YuanFang; Zheng, XiaoDong; Huang, YuJia

2017-08-01

Curriculum design and simulation courses are bridges to connect specialty theories, engineering practice and experimental skills. In order to help students to have the computer aided optical system design ability adapting to developments of the times, a professional optical software-Advanced System of Analysis Program (ASAP) was used in the research teaching of curriculum design and simulation courses. The ASAP tutorials conducting, exercises both complementing and supplementing the lectures, hands-on practice in class, autonomous learning and independent design after class were bridged organically, to guide students "learning while doing, learning by doing", paying more attention to the process instead of the results. Several years of teaching practice of curriculum design and simulation courses shows that, project-based learning meets society needs of training personnel with knowledge, ability and quality. Students have obtained not only skills of using professional software, but also skills of finding and proposing questions in engineering practice, the scientific method of analyzing and solving questions with specialty knowledge, in addition, autonomous learning ability, teamwork spirit and innovation consciousness, still scientific attitude of facing failure and scientific spirit of admitting deficiency in the process of independent design and exploration.

Roogle: an information retrieval engine for clinical data warehouse.

PubMed

Cuggia, Marc; Garcelon, Nicolas; Campillo-Gimenez, Boris; Bernicot, Thomas; Laurent, Jean-François; Garin, Etienne; Happe, André; Duvauferrier, Régis

2011-01-01

High amount of relevant information is contained in reports stored in the electronic patient records and associated metadata. R-oogle is a project aiming at developing information retrieval engines adapted to these reports and designed for clinicians. The system consists in a data warehouse (full-text reports and structured data) imported from two different hospital information systems. Information retrieval is performed using metadata-based semantic and full-text search methods (as Google). Applications may be biomarkers identification in a translational approach, search of specific cases, and constitution of cohorts, professional practice evaluation, and quality control assessment.

Dredging and Water Quality Problems in the Great Lakes. Volume 2. Appendices A1 to A19. Sampling Surveys with Separate Reports

DTIC Science & Technology

1969-01-01

Ii necessary and Identity by block number) Dredging Water Quality Water Pollution M0 AUOTR ACT e-ausamtoj m wesem. et itp omea d Identtfy by block...nmuibeA) The present report presents the results of a study conducted by the Corps Engineers with cooperation of the Federal Water Pollution Control...areas of the Great Lakes, as well as to develop the most practical methods for management of pollution problems that may be identified as resulting

TQM: A bibliography with abstracts. [total quality management

NASA Technical Reports Server (NTRS)

Gottlich, Gretchen L. (Editor)

1992-01-01

This document is designed to function as a special resource for NASA Langley scientists, engineers, and managers during the introduction and development of total quality management (TQM) practices at the Center. It lists approximately 300 bibliographic citations for articles and reports dealing with various aspects of TQM. Abstracts are also available for the majority of the citations. Citations are organized by broad subject areas, including case studies, customer service, senior management, leadership, communication tools, TQM basics, applications, and implementation. An introduction and indexes provide additional information on arrangement and availability of these materials.

Formula student as part of a mechanical engineering curriculum

NASA Astrophysics Data System (ADS)

Davies, Huw Charles

2013-10-01

Formula Student (FS) is a multi-university student design competition managed by the UK Institution of Mechanical Engineers. Students are required to demonstrate and prove their creativity and engineering skills through the design, manufacture and financing of a small formula style race car. This paper seeks to explore the educational value that derives from the FS activity through a series of semi-structured interviews with key stakeholders. Through the analysis of the interview data, it was found that the FS activity supported development of student skills and competencies in the following areas: use of engineering knowledge to support the application of existing and emerging technology; application of theoretical and practical knowledge to the solution of engineering problems; development of technical and commercial management skills; development of effective interpersonal skills, including communication skills; and demonstration of personal commitment to professional development. In addition, a number of areas for implementing 'good practise' have been identified. The information herein supports educators in their responsibility to help meet the needs of the engineering industry for high quality graduates.

Quality engineering as a profession.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kolb, Rachel R.; Hoover, Marcey L.

Over the course of time, the profession of quality engineering has witnessed significant change, from its original emphasis on quality control and inspection to a more contemporary focus on upholding quality processes throughout the organization and its product realization activities. This paper describes the profession of quality engineering, exploring how todays quality engineers and quality professionals are certified individuals committed to upholding quality processes and principles while working with different dimensions of product development. It also discusses the future of the quality engineering profession and the future of the quality movement as a whole.

Quality in physical therapist clinical education: a systematic review.

PubMed

McCallum, Christine A; Mosher, Peter D; Jacobson, Peri J; Gallivan, Sean P; Giuffre, Suzanne M

2013-10-01

Many factors affect student learning throughout the clinical education (CE) component of professional (entry-level) physical therapist education curricula. Physical therapist education programs (PTEPs) manage CE, yet the material and human resources required to provide CE are generally overseen by community-based physical therapist practices. The purposes of this systematic review were: (1) to examine how the construct of quality is defined in CE literature and (2) to determine the methodological rigor of the available evidence on quality in physical therapist CE. This study was a systematic review of English-language journals using the American Physical Therapy Association's Open Door Portal to Evidence-Based Practice as the computer search engine. The search was categorized using terms for physical therapy and quality and for CE pedagogy and models or roles. Summary findings were characterized by 5 primary themes and 14 subthemes using a qualitative-directed content analysis. Fifty-four articles were included in the study. The primary quality themes were: CE framework, CE sites, structure of CE, assessment in CE, and CE faculty. The methodological rigor of the studies was critically appraised using a binary system based on the McMaster appraisal tools. Scores ranged from 3 to 14. Publication bias and outcome reporting bias may be inherent limitations to the results. The review found inconclusive evidence about what constitutes quality or best practice for physical therapist CE. Five key constructs of CE were identified that, when aggregated, could construe quality.

Building "e-rater"® Scoring Models Using Machine Learning Methods. Research Report. ETS RR-16-04

ERIC Educational Resources Information Center

Chen, Jing; Fife, James H.; Bejar, Isaac I.; Rupp, André A.

2016-01-01

The "e-rater"® automated scoring engine used at Educational Testing Service (ETS) scores the writing quality of essays. In the current practice, e-rater scores are generated via a multiple linear regression (MLR) model as a linear combination of various features evaluated for each essay and human scores as the outcome variable. This…

The Development of Computational Thinking in the Context of Science and Engineering Practices: A Self-Regulated Learning Approach

ERIC Educational Resources Information Center

Peters-Burton, Erin E.; Cleary, Timothy J.; Kitsantas, Anastasia

2015-01-01

A quality educational experience for secondary students involves more than an acquisition of content knowledge; it entails providing students opportunities to develop a variety of thinking skills that enable integration of knowledge and the promotion of student self-directed learning outside of the classroom. One critical skill that is often…

Revising an Engineering Design Rubric: A Case Study Illustrating Principles and Practices to Ensure Technical Quality of Rubrics

ERIC Educational Resources Information Center

Goldberg, Gail Lynn

2014-01-01

This article provides a detailed account of a rubric revision process to address seven common problems to which rubrics are prone: lack of consistency and parallelism; the presence of "orphan" and "widow" words and phrases; redundancy in descriptors; inconsistency in the focus of qualifiers; limited routes to partial credit;…

Metropolitan Christina River Basin.

DTIC Science & Technology

1982-05-01

technical and economic feasibility. Effect assessments were conducted in sufficient detail to determine socio -economic and environ- mental practicability...benefits; however, some benefits may be foregone to obtain positive non-monetary contributions to the social well-being or enviromental quality...needed to insure that our present comitment to do specialized studies will not result in studies which conflict with the overall Corps of Engineers

2007 Mississippi Curriculum Framework: Postsecondary Small Engine and Turf Equipment Repair Technology. (Program CIP: 01.0299 Agricultural Mechanization, Other )

ERIC Educational Resources Information Center

Spence, Allen; Campus, Raymond

2007-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

Costing improvement of remanufacturing crankshaft by integrating Mahalanobis-Taguchi System and Activity based Costing

NASA Astrophysics Data System (ADS)

Abu, M. Y.; Nor, E. E. Mohd; Rahman, M. S. Abd

2018-04-01

Integration between quality and costing system is very crucial in order to achieve an accurate product cost and profit. Current practice by most of remanufacturers, there are still lacking on optimization during the remanufacturing process which contributed to incorrect variables consideration to the costing system. Meanwhile, traditional costing accounting being practice has distortion in the cost unit which lead to inaccurate cost of product. The aim of this work is to identify the critical and non-critical variables during remanufacturing process using Mahalanobis-Taguchi System and simultaneously estimate the cost using Activity Based Costing method. The orthogonal array was applied to indicate the contribution of variables in the factorial effect graph and the critical variables were considered with overhead costs that are actually demanding the activities. This work improved the quality inspection together with costing system to produce an accurate profitability information. As a result, the cost per unit of remanufactured crankshaft of MAN engine model with 5 critical crankpins is MYR609.50 while Detroit engine model with 4 critical crankpins is MYR1254.80. The significant of output demonstrated through promoting green by reducing re-melting process of damaged parts to ensure consistent benefit of return cores.

Innovative Mobile Smart Photonic Dimensional, Color and Spectral Measurement Engineering

NASA Astrophysics Data System (ADS)

Hofmann, Dr Dietrich, Prof; Dittrich (B. Eng. , Paul-Gerald; Höfner (B. Eng. , Dieter; Kraus, Daniel

2015-02-01

Aim of the paper is the demonstration of a paradigm shift in dimensional, color and spectral measurements in industry, biology/medicine, farming/environmental protection and security, as well as in education and training: Measurement engineering and quality assurance become mobile, modular and smart. Smartpads, smartphones and smartwatches (smartcomps) in combination with innovative hardware apps (hwapps) and conventional software apps (swapps) are fundamental enablers for the transformation from conventional stationary working places towards innovative mobile working places with in-field measurements and point-of-care (POC) diagnostics. Furthermore mobile open online courses (MOOCs) are transforming the study habits. Practical examples for the application of innovative photonic micro dimensiometers, colorimeters and spectrometers will be given. The innovative approach opens so far untapped enormous markets for measurement science, engineering, applications, education and training. These innovative working conditions will be fast accepted due to their convenience, reliability and affordability. A highly visible advantage of smartcomps is the huge number of their real distribution, their worldwide connectivity via Internet and cloud services, the standardized interfaces like USB and HDMI and the experienced capabilities of their users for practical operations, obtained with their private smartcomps.

Quantitative evaluation of recall and precision of CAT Crawler, a search engine specialized on retrieval of Critically Appraised Topics.

PubMed

Dong, Peng; Wong, Ling Ling; Ng, Sarah; Loh, Marie; Mondry, Adrian

2004-12-10

Critically Appraised Topics (CATs) are a useful tool that helps physicians to make clinical decisions as the healthcare moves towards the practice of Evidence-Based Medicine (EBM). The fast growing World Wide Web has provided a place for physicians to share their appraised topics online, but an increasing amount of time is needed to find a particular topic within such a rich repository. A web-based application, namely the CAT Crawler, was developed by Singapore's Bioinformatics Institute to allow physicians to adequately access available appraised topics on the Internet. A meta-search engine, as the core component of the application, finds relevant topics following keyword input. The primary objective of the work presented here is to evaluate the quantity and quality of search results obtained from the meta-search engine of the CAT Crawler by comparing them with those obtained from two individual CAT search engines. From the CAT libraries at these two sites, all possible keywords were extracted using a keyword extractor. Of those common to both libraries, ten were randomly chosen for evaluation. All ten were submitted to the two search engines individually, and through the meta-search engine of the CAT Crawler. Search results were evaluated for relevance both by medical amateurs and professionals, and the respective recall and precision were calculated. While achieving an identical recall, the meta-search engine showed a precision of 77.26% (+/-14.45) compared to the individual search engines' 52.65% (+/-12.0) (p < 0.001). The results demonstrate the validity of the CAT Crawler meta-search engine approach. The improved precision due to inherent filters underlines the practical usefulness of this tool for clinicians.

Quantitative evaluation of recall and precision of CAT Crawler, a search engine specialized on retrieval of Critically Appraised Topics

PubMed Central

Dong, Peng; Wong, Ling Ling; Ng, Sarah; Loh, Marie; Mondry, Adrian

2004-01-01

Background Critically Appraised Topics (CATs) are a useful tool that helps physicians to make clinical decisions as the healthcare moves towards the practice of Evidence-Based Medicine (EBM). The fast growing World Wide Web has provided a place for physicians to share their appraised topics online, but an increasing amount of time is needed to find a particular topic within such a rich repository. Methods A web-based application, namely the CAT Crawler, was developed by Singapore's Bioinformatics Institute to allow physicians to adequately access available appraised topics on the Internet. A meta-search engine, as the core component of the application, finds relevant topics following keyword input. The primary objective of the work presented here is to evaluate the quantity and quality of search results obtained from the meta-search engine of the CAT Crawler by comparing them with those obtained from two individual CAT search engines. From the CAT libraries at these two sites, all possible keywords were extracted using a keyword extractor. Of those common to both libraries, ten were randomly chosen for evaluation. All ten were submitted to the two search engines individually, and through the meta-search engine of the CAT Crawler. Search results were evaluated for relevance both by medical amateurs and professionals, and the respective recall and precision were calculated. Results While achieving an identical recall, the meta-search engine showed a precision of 77.26% (±14.45) compared to the individual search engines' 52.65% (±12.0) (p < 0.001). Conclusion The results demonstrate the validity of the CAT Crawler meta-search engine approach. The improved precision due to inherent filters underlines the practical usefulness of this tool for clinicians. PMID:15588311

Adaptive design lessons from professional architects

NASA Astrophysics Data System (ADS)

Geiger, Ray W.; Snell, J. T.

1993-09-01

Psychocybernetic systems engineering design conceptualization is mimicking the evolutionary path of habitable environmental design and the professional practice of building architecture, construction, and facilities management. In pursuing better ways to design cellular automata and qualification classifiers in a design process, we have found surprising success in exploring certain more esoteric approaches, e.g., the vision of interdisciplinary artistic discovery in and around creative problem solving. Our evaluation in research into vision and hybrid sensory systems associated with environmental design and human factors has led us to discover very specific connections between the human spirit and quality design. We would like to share those very qualitative and quantitative parameters of engineering design, particularly as it relates to multi-faceted and future oriented design practice. Discussion covers areas of case- based techniques of cognitive ergonomics, natural modeling sources, and an open architectural process of means/goal satisfaction, qualified by natural repetition, gradation, rhythm, contrast, balance, and integrity of process.

A novel evaluation method for building construction project based on integrated information entropy with reliability theory.

PubMed

Bai, Xiao-ping; Zhang, Xi-wei

2013-01-01

Selecting construction schemes of the building engineering project is a complex multiobjective optimization decision process, in which many indexes need to be selected to find the optimum scheme. Aiming at this problem, this paper selects cost, progress, quality, and safety as the four first-order evaluation indexes, uses the quantitative method for the cost index, uses integrated qualitative and quantitative methodologies for progress, quality, and safety indexes, and integrates engineering economics, reliability theories, and information entropy theory to present a new evaluation method for building construction project. Combined with a practical case, this paper also presents detailed computing processes and steps, including selecting all order indexes, establishing the index matrix, computing score values of all order indexes, computing the synthesis score, sorting all selected schemes, and making analysis and decision. Presented method can offer valuable references for risk computing of building construction projects.

System engineering toolbox for design-oriented engineers

NASA Technical Reports Server (NTRS)

Goldberg, B. E.; Everhart, K.; Stevens, R.; Babbitt, N., III; Clemens, P.; Stout, L.

1994-01-01

This system engineering toolbox is designed to provide tools and methodologies to the design-oriented systems engineer. A tool is defined as a set of procedures to accomplish a specific function. A methodology is defined as a collection of tools, rules, and postulates to accomplish a purpose. For each concept addressed in the toolbox, the following information is provided: (1) description, (2) application, (3) procedures, (4) examples, if practical, (5) advantages, (6) limitations, and (7) bibliography and/or references. The scope of the document includes concept development tools, system safety and reliability tools, design-related analytical tools, graphical data interpretation tools, a brief description of common statistical tools and methodologies, so-called total quality management tools, and trend analysis tools. Both relationship to project phase and primary functional usage of the tools are also delineated. The toolbox also includes a case study for illustrative purposes. Fifty-five tools are delineated in the text.

UPEC `94 review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hammons, T.J.

1995-02-01

The twenty-ninth Universities Power Engineering Conference (UPEC `94), held September 14--16, 1994, at University College, Galway, Ireland, surpassed all previous meetings in respect of number and quality of technical content of the papers and number of delegates attending. As in the past, it had a broad theme, covering all aspects of electrical power engineering, and was attended by academics, research workers, and members of the power service and manufacturing organizations. During the sessions, 265 papers from more than 30 countries were debated. There were 27 technical sessions, 3 poster sessions, and an opening and a closing session, 160 papers beingmore » presented orally in four groups of parallel sessions, the remainder being presented in poster sessions. The high standard of the papers, presentations, and technical discussions was particularly gratifying. The Universities Power Engineering Conference, held annually, provides a forum for the exchange of ideas among practicing engineers from the universities, consultants, and in the manufacturing and supply industries.« less

Evaluation of the Quality of Online Information for Patients with Rare Cancers: Thyroid Cancer.

PubMed

Kuenzel, Ulrike; Monga Sindeu, Tabea; Schroth, Sarah; Huebner, Jutta; Herth, Natalie

2017-01-24

The Internet offers an easy and quick access to a vast amount of patient information. However, several studies point to the poor quality of many websites and the resulting hazards of false information. The aim of this study was to assess quality of information on thyroid cancer. A patients' search for information about thyroid cancer on German websites was simulated using the search engine Google and the patient portal "Patienten-Information.de". The websites were assessed using a standardized instrument with formal and content aspects from the German Cancer Society. Supporting the results of prior studies that analysed patient information on the Internet, the data showed that the quality of patient information on thyroid cancer is highly heterogeneous depending on the website providers. The majority of website providers are represented by media and health providers other than health insurances, practices and professionals offering patient information of relatively poor quality. Moreover, most websites offer patient information of low-quality content. Only a few trustworthy, high-quality websites exist. Especially Google, a common search engine, focuses more on the dissemination of information than on quality aspects. In order to improve the patient information from the Internet, the visibility of high-quality websites must be improved. For that, education programs to improve patients' eHealth literacy are needed. A quick and easy evaluation tool for online information suited for patients should be implemented, and patients should be taught to integrate such a tool into their research process.

Section 3: Quality and Value-Based Requirements

NASA Astrophysics Data System (ADS)

Mylopoulos, John

Traditionally, research and practice in software engineering has focused its attention on specific software qualities, such as functionality and performance. According to this perspective, a system is deemed to be of good quality if it delivers all required functionality (“fitness-for-purpose”) and its performance is above required thresholds. Increasingly, primarily in research but also in practice, other qualities are attracting attention. To facilitate evolution, maintainability and adaptability are gaining popularity. Usability, universal accessibility, innovativeness, and enjoyability are being studied as novel types of non-functional requirements that we do not know how to define, let alone accommodate, but which we realize are critical under some contingencies. The growing importance of the business context in the design of software-intensive systems has also thrust economic value, legal compliance, and potential social and ethical implications into the forefront of requirements topics. A focus on the broader user environment and experience, as well as the organizational and societal implications of system use, thus has become more central to the requirements discourse. This section includes three contributions to this broad and increasingly important topic.

An Input and Output Analysis of the Quaternity-Dominating Energy Engineering Model from China’s Countryside

NASA Astrophysics Data System (ADS)

Xie, Xing Long; Xian Xue, Wei

2017-12-01

The aim of this study is to qualitatively and quantitatively explore an energy engineering model termed quaternity-dominating pattern emerging in North China’s countryside. This study finds methane produced in this model serves household activities such as cooking, inducing reduction of coal or biomass spending, which otherwise would provoke air pollution, water loss and land erosion, and ultimately leading to ecological environment betterment. Additionally, this project generates byproducts, biogas liquids and residuals, which can, as a category of fertilizer, can promote straightening of fertility preservation capacity and improvement in the chemical and physical quality of land as well as increasing crop output and quality. This study also finds this engineering could encourage social stability via efficiently allocating bucolic surplus labor during winter and successful running this engineering project would trigger an increase of scientific and technological qualifications for rural citizens. Moreover, cost-profit analysis indicates this pattern can allow one rural home to obtain access to a hygienic energy resource of biogas in the yearly volume of 375m3, generate annual net earnings of US3458.82 and make investment return in about 2.73 years. Especially for poverty-stricken areas, this energy engineering project enjoys high values and great significance, which can lift these impoverished areas from poverty both in economics and energy. The paper concludes with pointing out practical proposals on launching and operating this energy engineering project.

Knowledge Management tools integration within DLR's concurrent engineering facility

NASA Astrophysics Data System (ADS)

Lopez, R. P.; Soragavi, G.; Deshmukh, M.; Ludtke, D.

The complexity of space endeavors has increased the need for Knowledge Management (KM) tools. The concept of KM involves not only the electronic storage of knowledge, but also the process of making this knowledge available, reusable and traceable. Establishing a KM concept within the Concurrent Engineering Facility (CEF) has been a research topic of the German Aerospace Centre (DLR). This paper presents the current KM tools of the CEF: the Software Platform for Organizing and Capturing Knowledge (S.P.O.C.K.), the data model Virtual Satellite (VirSat), and the Simulation Model Library (SimMoLib), and how their usage improved the Concurrent Engineering (CE) process. This paper also exposes the lessons learned from the introduction of KM practices into the CEF and elaborates a roadmap for the further development of KM in CE activities at DLR. The results of the application of the Knowledge Management tools have shown the potential of merging the three software platforms with their functionalities, as the next step towards the fully integration of KM practices into the CE process. VirSat will stay as the main software platform used within a CE study, and S.P.O.C.K. and SimMoLib will be integrated into VirSat. These tools will support the data model as a reference and documentation source, and as an access to simulation and calculation models. The use of KM tools in the CEF aims to become a basic practice during the CE process. The settlement of this practice will result in a much more extended knowledge and experience exchange within the Concurrent Engineering environment and, consequently, the outcome of the studies will comprise higher quality in the design of space systems.

The Mayo Clinic Value Creation System.

PubMed

Swensen, Stephen J; Dilling, James A; Harper, C Michel; Noseworthy, John H

2012-01-01

The authors present Mayo Clinic's Value Creation System, a coherent systems engineering approach to delivering a single high-value practice. There are 4 tightly linked, interdependent phases of the system: alignment, discovery, managed diffusion, and measurement. The methodology is described and examples of the results to date are presented. The Value Creation System has been demonstrated to improve the quality of patient care while reducing costs and increasing productivity.

Students' Pilot Laboratory for Homogeneous Chemical Reactor Analysis and Design in Olive Mill Wastewater Treatment

ERIC Educational Resources Information Center

Ochando-Pulido, J. M.

2017-01-01

The Chemical Engineering Department at the University of Granada have endeavored to make a number of high quality experiments to familiarize our students with our latest research and also scale-up of processes. A pilot-scale wastewater treatment plant was set-up to give students a close practical view of the treatments of effluents by-produced in…

HVAC--the importance of clean intake section and dry air filter in cold climate.

PubMed

Hanssen, S O

2004-01-01

HVAC systems, if properly designed, installed, operated and maintained, will improve thermal conditions and air quality indoors. However, the success strongly depends on the design of the system and the quality of the components we use in our HVAC installations. Regrettably, several investigations have revealed that many HVAC installations have a lot of operational and maintenance problems, especially related to moisture, rain and snow entrainment. In short, it seems that too little attention is placed on the design of the intake section, despite the fact that there exists a large number of national and international guidelines and recommendations. This is a serious problem because the air intake is the initial component of the ventilation plant and as such the first line of defense against debris and other outdoor air pollutants. Unfortunately, the design is often an argued compromise between the architect, the civil engineer and the HVAC engineer. In the future, the technical, hygienic and microbiological feature of air intakes must be better ensured in order to avoid the air intake becoming a risk component as regards contamination and indoor air quality. Further, it seems that the magnitude of the problem is not well known, or recognized, by the building designers, engineers and professionals involved in the construction and operation of buildings. This fact needs to be addressed more seriously, because obviously there is a big difference between the idealistic architectonic design, engineering intentions and the real life situation. Several practical recommendations for design and operation of HVAC systems are presented. Following the recommendations will result in less pollution from the HVAC-system and increased indoor environmental quality.

Theater as a Community-Building Strategy for Women in Engineering: Theory and Practice

NASA Astrophysics Data System (ADS)

Chesler, Naomi C.; Chesler, Mark A.

Previously, the authors have suggested that peer mentoring through a caring community would improve the quality of life for female faculty members in engineering and could have a positive effect on retention and career advancement. Here, the authors present the background psychosocial literature for choosing participatory theater as a strategy to develop a caring community and report on a pilot study in which participatory theater activities were used within a workshop format for untenured female faculty members in engineering. The authors identify the key differences between participatory theater and other strategies for community building that may enhance participants' sense of commonality and the strength and utility of their community as a mentoring and support mechanism and discuss the ways in which these efforts could have a broader, longer term impact.

Comparative analysis of structural concrete Quality Assurance practices on nine nuclear and three fossil fuel power plant construction projects. Final summary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Willenbrock, J.H.; Thomas, H.R. Jr.; Burati, J.J. Jr.

1978-12-01

A summary of two reports, COO/4120-1 and COO/4120-2, is given. A comparative analysis was made of the Quality Assurance practices related to the structural concrete phase on nine nuclear and three fossil fuel power plant projects which are (or have been) under construction in the United States in the past ten years. For the nuclear projects the analysis identified the response of each Quality Assurance program to the applicable criteria of 10 CFR Part 50, Appendix B as well as to the pertinent regulatory requirements and industry standards. For the fossil projects the analysis identified the response of each Qualitymore » Assurance program to criteria similar to those which were applicable in the nuclear situation. The major emphasis was placed on the construction aspects of the structural concrete phase of each project. The engineering and design aspects were examined whenever they interfaced with the construction aspects.« less

Advanced Engineering Environments: Implications for Aerospace Manufacturing

NASA Technical Reports Server (NTRS)

Thomas, D.

2001-01-01

There are significant challenges facing today's aerospace industry. Global competition, more complex products, geographically-distributed design teams, demands for lower cost, higher reliability and safer vehicles, and the need to incorporate the latest technologies quicker all face the developer of aerospace systems. New information technologies offer promising opportunities to develop advanced engineering environments (AEEs) to meet these challenges. Significant advances in the state-of-the-art of aerospace engineering practice are envisioned in the areas of engineering design and analytical tools, cost and risk tools, collaborative engineering, and high-fidelity simulations early in the development cycle. These advances will enable modeling and simulation of manufacturing methods, which will in turn allow manufacturing considerations to be included much earlier in the system development cycle. Significant cost savings, increased quality, and decreased manufacturing cycle time are expected to result. This paper will give an overview of the NASA's Intelligent Synthesis Environment, the agency initiative to develop an AEE, with a focus on the anticipated benefits in aerospace manufacturing.

Urban Stormwater Characterization, Control, and Treatment.

PubMed

Moore, Trisha L; Rodak, Carolyn M; Vogel, Jason R

2017-10-01

A summary of 246 studies published in 2016 on topics related to the characterization and management of urban stormwater runoff is presented in the following review. The review is structured along three major topical areas: (1) general characterization of stormwater quantity and quality; (2) engineered systems for stormwater control and treatment, including erosion and sediment control practices, constructed stormwater ponds and wetlands, bioretention, permeable pavement, greenroofs, and rainwater harvesting and (3) watershedscale application of stormwater treatment and control practices. Common research themes and needs highlighted throughout this review include efforts to better understand stormwater transport and treatment mechanisms and their representation in models, advancements to optimize the design of stormwater control measures to meet specific hydrologic and/or water quality targets, and increasing understanding of the biophysical and social factors that influence watershed-scale implementation of low impact development and other stormwater control measures.

Simple solution to the medical instrumentation software problem

NASA Astrophysics Data System (ADS)

Leif, Robert C.; Leif, Suzanne B.; Leif, Stephanie H.; Bingue, E.

1995-04-01

Medical devices now include a substantial software component, which is both difficult and expensive to produce and maintain. Medical software must be developed according to `Good Manufacturing Practices', GMP. Good Manufacturing Practices as specified by the FDA and ISO requires the definition and compliance to a software processes which ensures quality products by specifying a detailed method of software construction. The software process should be based on accepted standards. US Department of Defense software standards and technology can both facilitate the development and improve the quality of medical systems. We describe the advantages of employing Mil-Std-498, Software Development and Documentation, and the Ada programming language. Ada provides the very broad range of functionalities, from embedded real-time to management information systems required by many medical devices. It also includes advanced facilities for object oriented programming and software engineering.

Managed care strategy for mental health services.

PubMed

Jones, A

In the UK, managed care is beginning to be recognized as a cost effective, quality-driven system which can be used to structure patient care. This article examines the potential use of managed care pathways in mental health services, focusing on clients with schizophrenia. The strengths of managed care include the effective coordination of healthcare resources, the clear accountable audit of mental health practice and the re-engineering of mental health practice to improve patient outcomes. Problems in designing representative care pathways and encouraging healthcare providers to implement care pathways are some of the disadvantages of this system.

Quality assurance and accreditation of engineering education in Jordan

NASA Astrophysics Data System (ADS)

Aqlan, Faisal; Al-Araidah, Omar; Al-Hawari, Tarek

2010-06-01

This paper provides a study of the quality assurance and accreditation in the Jordanian higher education sector and focuses mainly on engineering education. It presents engineering education, accreditation and quality assurance in Jordan and considers the Jordan University of Science and Technology (JUST) for a case study. The study highlights the efforts undertaken by the faculty of engineering at JUST concerning quality assurance and accreditation. Three engineering departments were accorded substantial equivalency status by the Accreditation Board of Engineering and Technology in 2009. Various measures of quality improvement, including curricula development, laboratories improvement, computer facilities, e-learning, and other supporting services are also discussed. Further assessment of the current situation is made through two surveys, targeting engineering instructors and students. Finally, the paper draws conclusions and proposes recommendations to enhance the quality of engineering education at JUST and other Jordanian educational institutions.

Fostering Creative Engineers: A Key to Face the Complexity of Engineering Practice

ERIC Educational Resources Information Center

Zhou, Chunfang

2012-01-01

Recent studies have argued a shift of thinking about engineering practice from a linear conception to a system understanding. The complexity of engineering practice has been thought of as the root of challenges for engineers. Moreover, creativity has been emphasised as one key capability that engineering students should master. This paper aims to…

Exploration on the matching between Optical Comprehensive Design Experiment and Washington Accord

NASA Astrophysics Data System (ADS)

Cao, Yiping; Chen, Wenjing; Zhang, Qican; Liu, Yuankun; Li, Dahai; Zhou, Xinzhi; Wei, Jun

2017-08-01

Common problems faced in optical comprehensive design experiment and going against the Washington Accord are pointed out. For resolving these problems, an instructional and innovative teaching scheme for Optics Comprehensive Design Experiment is proposed. We would like to understand the student that can improve the hands-on practical ability, theory knowledge understanding ability, complex problem solving ability, engineering application ability, cooperative ability after tracking and researching the student who have attended the class about Optical Comprehensive Design Experiment, We found that there are some problems on the course such as the experiment content vague, the student beginning less time, phase separation theory and engineering application, the experiment content lack of selectivity and so on. So we have made some improvements reference to the Washington Accord for the class teaching plan about Optical Comprehensive Design Experiment. This class must relevant to the engineering basic courses, professional foundation course and the major courses, so far as to the future study and work that which can play a role in inheriting and continuity to the students. The Optical Comprehensive Design Experiment teaching program requires students learning this course to have learnt basic courses like analog electronics technique, digital electronic technique, applied optics and computer and other related courses which students are required to comprehensively utilize. This teaching scheme contains six practical complex engineering problems which are respectively optical system design, light energy meter design, illuminometer design, material refractive index measuring system design, light intensity measuring system design and open design. Establishing the optional experiment and open experiment can provide students with a greater choice and enhance the students' creativity, vivid teaching experimental teachers and enriching contents of experiment can make the experiment more interesting, providing students with more opportunities to conduct experiment and improving students' practical ability with long learning time, putting emphasis on student's understanding of complex engineering problems and the cognitive of the process to solve complex engineering problems with actual engineering problems. Applying the scheme in other courses and improving accordingly will be able to ensure the quality of engineering education. Look forward to offering useful reference for the curriculum system construction in colleges and universities.

Using experimental design modules for process characterization in manufacturing/materials processes laboratories

NASA Technical Reports Server (NTRS)

Ankenman, Bruce; Ermer, Donald; Clum, James A.

1994-01-01

Modules dealing with statistical experimental design (SED), process modeling and improvement, and response surface methods have been developed and tested in two laboratory courses. One course was a manufacturing processes course in Mechanical Engineering and the other course was a materials processing course in Materials Science and Engineering. Each module is used as an 'experiment' in the course with the intent that subsequent course experiments will use SED methods for analysis and interpretation of data. Evaluation of the modules' effectiveness has been done by both survey questionnaires and inclusion of the module methodology in course examination questions. Results of the evaluation have been very positive. Those evaluation results and details of the modules' content and implementation are presented. The modules represent an important component for updating laboratory instruction and to provide training in quality for improved engineering practice.

Utilization of alternative fuels in diesel engines

NASA Technical Reports Server (NTRS)

Lestz, S. A.

1984-01-01

Performance and emission data are collected for various candidate alternate fuels and compare these data to that for a certified petroleum based number two Diesel fuel oil. Results for methanol, ethanol, four vegetable oils, two shale derived oils, and two coal derived oils are reported. Alcohol fumigation does not appear to be a practical method for utilizing low combustion quality fuels in a Diesel engine. Alcohol fumigation enhances the bioactivity of the emitted exhaust particles. While it is possible to inject many synthetic fuels using the engine stock injection system, wholly acceptable performance is only obtained from a fuel whose specifications closely approach those of a finished petroleum based Diesel oil. This is illustrated by the contrast between the poor performance of the unupgraded coal derived fuel blends and the very good performance of the fully refined shale derived fuel.

Software engineering and Ada in design

NASA Technical Reports Server (NTRS)

Oneill, Don

1986-01-01

Modern software engineering promises significant reductions in software costs and improvements in software quality. The Ada language is the focus for these software methodology and tool improvements. The IBM FSD approach, including the software engineering practices that guide the systematic design and development of software products and the management of the software process are examined. The revised Ada design language adaptation is revealed. This four level design methodology is detailed including the purpose of each level, the management strategy that integrates the software design activity with the program milestones, and the technical strategy that maps the Ada constructs to each level of design. A complete description of each design level is provided along with specific design language recording guidelines for each level. Finally, some testimony is offered on education, tools, architecture, and metrics resulting from project use of the four level Ada design language adaptation.

For the general internist: a review of relevant 2013 innovations in medical education.

PubMed

Roy, Brita; Willett, Lisa L; Bates, Carol; Duffy, Briar; Dunn, Kathel; Karani, Reena; Chheda, Shobhina G

2015-04-01

We conducted a review of articles published in 2013 to identify high-quality research in medical education that was relevant to general medicine education practice. Our review team consisted of six general internists with expertise in medical education of varying ranks, as well as a professional medical librarian. We manually searched 15 journals in pairs, and performed an online search using the PubMed search engine for all original research articles in medical education published in 2013. From the total 4,181 citations identified, we selected 65 articles considered most relevant to general medicine educational practice. Each team member then independently reviewed and rated the quality of each selected article using the modified Medical Education Research Study Quality Instrument. We then reviewed the quality and relevance of each selected study and grouped them into categories of propensity for inclusion. Nineteen studies were felt to be of adequate quality and were of moderate to high propensity for inclusion. Team members then independently voted for studies they felt to be of the highest relevance and quality within the 19 selected studies. The ten articles with the greatest number of votes were included in the review. We categorized the studies into five general themes: Improving Clinical Skills in UME, Inpatient Clinical Teaching Methods, Advancements in Continuity Clinic, Handoffs/Transitions in Care, and Trainee Assessment. Most studies in our review of the 2013 literature in general medical education were limited to single institutions and non-randomized study designs; we identified significant limitations of each study. Selected articles may inform future research and practice of medical educators.

Teaching Engineering Practices

NASA Astrophysics Data System (ADS)

Cunningham, Christine M.; Carlsen, William S.

2014-03-01

Engineering is featured prominently in the Next Generation Science Standards (NGSS) and related reform documents, but how its nature and methods are described is problematic. This paper is a systematic review and critique of that representation, and proposes that the disciplinary core ideas of engineering (as described in the NGSS) can be disregarded safely if the practices of engineering are better articulated and modeled through student engagement in engineering projects. A clearer distinction between science and engineering practices is outlined, and prior research is described that suggests that precollege engineering design can strengthen children's understandings about scientific concepts. However, a piecemeal approach to teaching engineering practices is unlikely to result in students understanding engineering as a discipline. The implications for science teacher education are supplemented with lessons learned from a number of engineering education professional development projects.

Flux-tunable heat sink for quantum electric circuits.

PubMed

Partanen, M; Tan, K Y; Masuda, S; Govenius, J; Lake, R E; Jenei, M; Grönberg, L; Hassel, J; Simbierowicz, S; Vesterinen, V; Tuorila, J; Ala-Nissila, T; Möttönen, M

2018-04-20

Superconducting microwave circuits show great potential for practical quantum technological applications such as quantum information processing. However, fast and on-demand initialization of the quantum degrees of freedom in these devices remains a challenge. Here, we experimentally implement a tunable heat sink that is potentially suitable for the initialization of superconducting qubits. Our device consists of two coupled resonators. The first resonator has a high quality factor and a fixed frequency whereas the second resonator is designed to have a low quality factor and a tunable resonance frequency. We engineer the low quality factor using an on-chip resistor and the frequency tunability using a superconducting quantum interference device. When the two resonators are in resonance, the photons in the high-quality resonator can be efficiently dissipated. We show that the corresponding loaded quality factor can be tuned from above 10 5 down to a few thousand at 10 GHz in good quantitative agreement with our theoretical model.

Study on Stationarity of Random Load Spectrum Based on the Special Road

NASA Astrophysics Data System (ADS)

Yan, Huawen; Zhang, Weigong; Wang, Dong

2017-09-01

In the special road quality assessment method, there is a method using a wheel force sensor, the essence of this method is collecting the load spectrum of the car to reflect the quality of road. According to the definition of stochastic process, it is easy to find that the load spectrum is a stochastic process. However, the analysis method and application range of different random processes are very different, especially in engineering practice, which will directly affect the design and development of the experiment. Therefore, determining the type of a random process has important practical significance. Based on the analysis of the digital characteristics of road load spectrum, this paper determines that the road load spectrum in this experiment belongs to a stationary stochastic process, paving the way for the follow-up modeling and feature extraction of the special road.

Flood design recipes vs. reality: can predictions for ungauged basins be trusted?

NASA Astrophysics Data System (ADS)

Efstratiadis, A.; Koussis, A. D.; Koutsoyiannis, D.; Mamassis, N.

2014-06-01

Despite the great scientific and technological advances in flood hydrology, everyday engineering practices still follow simplistic approaches that are easy to formally implement in ungauged areas. In general, these "recipes" have been developed many decades ago, based on field data from typically few experimental catchments. However, many of them have been neither updated nor validated across all hydroclimatic and geomorphological conditions. This has an obvious impact on the quality and reliability of hydrological studies, and, consequently, on the safety and cost of the related flood protection works. Preliminary results, based on historical flood data from Cyprus and Greece, indicate that a substantial revision of many aspects of flood engineering procedures is required, including the regionalization formulas as well as the modelling concepts themselves. In order to provide a consistent design framework and to ensure realistic predictions of the flood risk (a key issue of the 2007/60/EU Directive) in ungauged basins, it is necessary to rethink the current engineering practices. In this vein, the collection of reliable hydrological data would be essential for re-evaluating the existing "recipes", taking into account local peculiarities, and for updating the modelling methodologies as needed.

Retrospective Perceptions and Views of Engineering Students about Physics and Engineering Practicals

ERIC Educational Resources Information Center

Bhathal, R.

2011-01-01

Hands-on practical work in physics and engineering has a long and well-established tradition in Australian universities. Recently, however, the question of whether hands-on physics and engineering practicals are useful for engineering students and whether they could be deleted or whether these could be replaced with computer simulations has been…

Comparative tests of bench equipment for fuel control system testing of gas-turbine engine

NASA Astrophysics Data System (ADS)

Shendaleva, E. V.

2018-04-01

The relevance of interlaboratory comparative researches is confirmed by attention of world metrological community to this field of activity. Use of the interlaboratory comparative research methodology not only for single gages collation, but also for bench equipment complexes, such as modeling stands for fuel control system testing of gas-turbine engine, is offered. In this case a comparative measure of different bench equipment will be the control fuel pump. Ensuring traceability of measuring result received at test benches of various air enterprises, development and introduction of national standards to practice of bench tests and, eventually, improvement of quality and safety of a aircraft equipment is result of this approach.

Application of BIM technology in green scientific research office building

NASA Astrophysics Data System (ADS)

Ni, Xin; Sun, Jianhua; Wang, Bo

2017-05-01

BIM technology as a kind of information technology, has been along with the advancement of building industrialization application in domestic building industry gradually. Based on reasonable construction BIM model, using BIM technology platform, through collaborative design tools can effectively improve the design efficiency and design quality. Vanda northwest engineering design and research institute co., LTD., the scientific research office building project in combination with the practical situation of engineering using BIM technology, formed in the BIM model combined with related information according to the energy energy model (BEM) and the application of BIM technology in construction management stage made exploration, and the direct experience and the achievements gained by the architectural design part made a summary.

Quality assurance program requirements, Amendment 5 (9-26-79) to August 1973 issue

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This standard sets forth general requirements for planning, managing, conducting, and evaluating quality assurance programs for reactor development and test facility projects and associated processes, structures, components, and systems. These quality assurance requirements are based on proven practices and provide the means of control and verification whereby those responsible fo poject management can assure that the quality required for safe, reliable, and economical operation will be achieved. The objective of the program of the programs covered by this standard is to assure that structures, components, systems, and facilities are designed, developed, manufactured, constructed, operated, and maintained in compliance with establishedmore » engineering criteria. To achieve this objective, controls are to be established and implemented at predetermined points, and necessary action taken to prevent, detect, and correct any deficiencies.« less

Use of Soft Computing Technologies for a Qualitative and Reliable Engine Control System for Propulsion Systems

NASA Technical Reports Server (NTRS)

Trevino, Luis; Brown, Terry; Crumbley, R. T. (Technical Monitor)

2001-01-01

The problem to be addressed in this paper is to explore how the use of Soft Computing Technologies (SCT) could be employed to improve overall vehicle system safety, reliability, and rocket engine performance by development of a qualitative and reliable engine control system (QRECS). Specifically, this will be addressed by enhancing rocket engine control using SCT, innovative data mining tools, and sound software engineering practices used in Marshall's Flight Software Group (FSG). The principle goals for addressing the issue of quality are to improve software management, software development time, software maintenance, processor execution, fault tolerance and mitigation, and nonlinear control in power level transitions. The intent is not to discuss any shortcomings of existing engine control methodologies, but to provide alternative design choices for control, implementation, performance, and sustaining engineering, all relative to addressing the issue of reliability. The approaches outlined in this paper will require knowledge in the fields of rocket engine propulsion (system level), software engineering for embedded flight software systems, and soft computing technologies (i.e., neural networks, fuzzy logic, data mining, and Bayesian belief networks); some of which are briefed in this paper. For this effort, the targeted demonstration rocket engine testbed is the MC-1 engine (formerly FASTRAC) which is simulated with hardware and software in the Marshall Avionics & Software Testbed (MAST) laboratory that currently resides at NASA's Marshall Space Flight Center, building 4476, and is managed by the Avionics Department. A brief plan of action for design, development, implementation, and testing a Phase One effort for QRECS is given, along with expected results. Phase One will focus on development of a Smart Start Engine Module and a Mainstage Engine Module for proper engine start and mainstage engine operations. The overall intent is to demonstrate that by employing soft computing technologies, the quality and reliability of the overall scheme to engine controller development is further improved and vehicle safety is further insured. The final product that this paper proposes is an approach to development of an alternative low cost engine controller that would be capable of performing in unique vision spacecraft vehicles requiring low cost advanced avionics architectures for autonomous operations from engine pre-start to engine shutdown.

Anticipated Effectiveness of Active Noise Control in Propeller Aircraft Interiors as Determined by Sound Quality Tests

NASA Technical Reports Server (NTRS)

Powell, Clemans A.; Sullivan, Brenda M.

2004-01-01

Two experiments were conducted, using sound quality engineering practices, to determine the subjective effectiveness of hypothetical active noise control systems in a range of propeller aircraft. The two tests differed by the type of judgments made by the subjects: pair comparisons in the first test and numerical category scaling in the second. Although the results of the two tests were in general agreement that the hypothetical active control measures improved the interior noise environments, the pair comparison method appears to be more sensitive to subtle changes in the characteristics of the sounds which are related to passenger preference.

Relative Importance of Professional Practice and Engineering Management Competencies

ERIC Educational Resources Information Center

Pons, Dirk

2016-01-01

Problem: The professional practice of engineering always involves engineering management, but it is difficult to know what specifically to include in the undergraduate curriculum. Approach: The population of New Zealand practising engineers was surveyed to determine the importance they placed on specific professional practice and engineering…

Further Development, Support and Enhancement of CONDUIT

NASA Technical Reports Server (NTRS)

Veronica, Moldoveanu; Levine, William S.

1999-01-01

From the first airplanes steered by handles, wheels, and pedals to today's advanced aircraft, there has been a century of revolutionary inventions, all of them contributing to flight quality. The stability and controllability of aircraft as they appear to a pilot are called flying or handling qualities. Many years after the first airplanes flew, flying qualities were identified and ranked from desirable to unsatisfactory. Later on engineers developed design methods to satisfy these practical criteria. CONDUIT, which stands for Control Designer's Unified Interface, is a modern software package that provides a methodology for optimization of flight control systems in order to improve the flying qualities. CONDUIT is dependent on an the optimization engine called CONSOL-OPTCAD (C-O). C-O performs multicriterion parametric optimization. C-O was successfully tested on a variety of control problems. The optimization-based computational system, C-O, requires a particular control system description as a MATLAB file and possesses the ability to modify the vector of design parameters in an attempt to satisfy performance objectives and constraints specified by the designer, in a C-type file. After the first optimization attempts on the UH-60A control system, an early interface system, named GIFCORCODE (Graphical Interface for CONSOL-OPTCAD for Rotorcraft Controller Design) was created.

Balancing the Ecological Function of Residential Stormwater Ponds with Homeowner Landscaping Practices.

PubMed

Monaghan, Paul; Hu, Shangchun; Hansen, Gail; Ott, Emily; Nealis, Charles; Morera, Maria

2016-11-01

Stormwater ponds are installed in urban developments to provide the ecosystem services of flood control and water treatment. In coastal areas, these ponds are connected to watersheds that can drain directly into protected estuaries, making their design, function, and maintenance critical to environmental protection. However, stormwater ponds in residential areas are increasingly managed as aesthetic amenities that add value to real estate rather than as engineered devices with special maintenance requirements. To help extend the life of neighborhood stormwater systems and improve ecosystem services, homeowners should follow best management practices for nutrient management and add shoreline plantings and non-invasive, beneficial aquatic plants to their ponds. This study used focus group and survey research to document the knowledge, behaviors, and attitudes of homeowners living near stormwater ponds in a master-planned community in Florida. The study was designed to use a social marketing research approach to promote Extension best practices. Findings indicate that many residents were aware of the functional components of stormwater systems and respondents' receptivity to best management practices was mediated by age, their attitudes about water quality and whether their home was adjacent to a pond. These findings can be used to target Extension audiences and improve adoption of stormwater pond best management practices for increased protection of water quality.

Balancing the Ecological Function of Residential Stormwater Ponds with Homeowner Landscaping Practices

NASA Astrophysics Data System (ADS)

Monaghan, Paul; Hu, Shangchun; Hansen, Gail; Ott, Emily; Nealis, Charles; Morera, Maria

2016-11-01

Stormwater ponds are installed in urban developments to provide the ecosystem services of flood control and water treatment. In coastal areas, these ponds are connected to watersheds that can drain directly into protected estuaries, making their design, function, and maintenance critical to environmental protection. However, stormwater ponds in residential areas are increasingly managed as aesthetic amenities that add value to real estate rather than as engineered devices with special maintenance requirements. To help extend the life of neighborhood stormwater systems and improve ecosystem services, homeowners should follow best management practices for nutrient management and add shoreline plantings and non-invasive, beneficial aquatic plants to their ponds. This study used focus group and survey research to document the knowledge, behaviors, and attitudes of homeowners living near stormwater ponds in a master-planned community in Florida. The study was designed to use a social marketing research approach to promote Extension best practices. Findings indicate that many residents were aware of the functional components of stormwater systems and respondents' receptivity to best management practices was mediated by age, their attitudes about water quality and whether their home was adjacent to a pond. These findings can be used to target Extension audiences and improve adoption of stormwater pond best management practices for increased protection of water quality.

Specialized medical search-engines are no better than general search-engines in sourcing consumer information about androgen deficiency.

PubMed

Ilic, D; Bessell, T L; Silagy, C A; Green, S

2003-03-01

The Internet provides consumers with access to online health information; however, identifying relevant and valid information can be problematic. Our objectives were firstly to investigate the efficiency of search-engines, and then to assess the quality of online information pertaining to androgen deficiency in the ageing male (ADAM). Keyword searches were performed on nine search-engines (four general and five medical) to identify website information regarding ADAM. Search-engine efficiency was compared by percentage of relevant websites obtained via each search-engine. The quality of information published on each website was assessed using the DISCERN rating tool. Of 4927 websites searched, 47 (1.44%) and 10 (0.60%) relevant websites were identified by general and medical search-engines respectively. The overall quality of online information on ADAM was poor. The quality of websites retrieved using medical search-engines did not differ significantly from those retrieved by general search-engines. Despite the poor quality of online information relating to ADAM, it is evident that medical search-engines are no better than general search-engines in sourcing consumer information relevant to ADAM.

Quantity and quality in nuclear engineering professional skills needed by the nuclear power industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Slember, R.J.

1990-01-01

This paper examines the challenge of work force requirements in the context of the full range of issues facing the nuclear power industry. The supply of skilled managers and workers may be a more serious problem if nuclear power fades away than if it is reborn in a new generation. An even greater concern, however, is the quality of education that the industry needs in all its future professionals. Both government and industry should be helping universities adapt their curricula to the needs of the future. This means building a closer relationship with schools that educate nuclear professionals, that is,more » providing adequate scholarships and funding for research and development programs, offering in-kind services, and encouraging internships and other opportunities for hands-on experience. The goal should not be just state-of-the-art engineering practices, but the broad range of knowledge, issues, and skills that will be required of the nuclear leadership of the twenty-first century.« less

Integrating Safety and Mission Assurance into Systems Engineering Modeling Practices

NASA Technical Reports Server (NTRS)

Beckman, Sean; Darpel, Scott

2015-01-01

During the early development of products, flight, or experimental hardware, emphasis is often given to the identification of technical requirements, utilizing such tools as use case and activity diagrams. Designers and project teams focus on understanding physical and performance demands and challenges. It is typically only later, during the evaluation of preliminary designs that a first pass, if performed, is made to determine the process, safety, and mission quality assurance requirements. Evaluation early in the life cycle, though, can yield requirements that force a fundamental change in design. This paper discusses an alternate paradigm for using the concepts of use case or activity diagrams to identify safety hazard and mission quality assurance risks and concerns using the same systems engineering modeling tools being used to identify technical requirements. It contains two examples of how this process might be used in the development of a space flight experiment, and the design of a Human Powered Pizza Delivery Vehicle, along with the potential benefits to decrease development time, and provide stronger budget estimates.

Workshop on Agricultural Air Quality: State of the science

NASA Astrophysics Data System (ADS)

Aneja, Viney P.; Blunden, Jessica; Roelle, Paul A.; Schlesinger, William H.; Knighton, Raymond; Niyogi, Dev; Gilliam, Wendell; Jennings, Greg; Duke, Clifford S.

The first Workshop on Agricultural Air Quality: State of the Science was held at the Bolger Center in Potomac, Maryland from 4 to 8 June 2006. This international conference assembled approximately 350 people representing 25 nations from 5 continents, with disciplines ranging from atmospheric chemistry to soil science. The workshop was designed as an open forum in which participants could openly exchange the most current knowledge and learn about numerous international perspectives regarding agricultural air quality. Participants represented many stakeholder groups concerned with the growing need to assess agricultural impacts on the atmosphere and to develop beneficial policies to improve air quality. The workshop focused on identifying methods to improve emissions inventories and best management practices for agriculture. Workshop participants also made recommendations for technological and methodological improvements in current emissions measurement and modeling practices. The workshop commenced with a session on agricultural emissions and was followed by international perspectives from the United States, Europe, Australia, India, and South America. This paper summarizes the findings and issues of the workshop and articulates future research needs. These needs were identified in three general areas: (1) improvement of emissions measurement; (2) development of appropriate emission factors; and (3) implementation of best management practices (BMPs) to minimize negative environmental impacts. Improvements in the appropriate measurements will inform decisions regarding US farming practices. A need was demonstrated for a national/international network to monitor atmospheric emissions from agriculture and their subsequent depositions to surrounding areas. Information collected through such a program may be used to assess model performance and could be critical for evaluating any future regulatory policies or BMPs. The workshop concluded that efforts to maximize benefits and reduce detrimental effects of agricultural production need to transcend disciplinary, geographic, and political boundaries. Also, such efforts should involve natural and social scientists, economists, engineers, business leaders, and decision makers. The workshop came to the conclusion that through these collaborative efforts improvements in air quality from agricultural practices will begin to take effect.

Association Between State Assistance on the Topic of Indoor Air Quality and School District-Level Policies That Promote Indoor Air Quality in Schools.

PubMed

Everett Jones, Sherry; Doroski, Brenda; Glick, Sherry

2015-12-01

Nationally representative data from the 2012 School Health Policies and Practices Study examined whether state assistance on indoor air quality (IAQ) was associated with district-level policies and practices related to IAQ and integrated pest management (IPM). Districts in states that provided assistance on IAQ were more likely than districts not in such states to (1) have an IAQ management program (p < .001); (2) require schools to conduct periodic inspections of the heating, ventilation, and air conditioning system (p < .05); of the building for cracks, leaks, or past water damage (p < .01); for mold (p < .01); for clutter that prevents effective cleaning and maintenance (p < .05); of the plumbing system (p < .01); and for condensation in and around school facilities (p < .001); (3) have an engine idling reduction program ( < .001); (4) have a policy to purchase low-emitting products (p < .05); and (5) require IPM strategies (p < .05). Increasing the number of states that provide IAQ-related assistance to school districts and schools may improve school IAQ. © The Author(s) 2015.

What Chemistry To Teach Engineers?

ERIC Educational Resources Information Center

Hawkes, Stephen J.

2000-01-01

Examines possible general chemistry topics that would be most relevant and practical for engineering majors. Consults the Accreditation Board for Engineering and Technology (ABET), engineering textbooks, texts from other required subjects, and practicing engineers for recommendations. (Contains 24 references.) (WRM)

Studying Science and Engineering Learning in Practice

ERIC Educational Resources Information Center

Penuel, William R.

2016-01-01

A key goal of science and engineering education is to provide opportunities for people to access, interpret, and make use of science and engineering to address practical human needs. Most education research, however, focuses on how best to prepare students in schools to participate in forms of science and engineering practices that resemble those…

40 CFR 86.098-23 - Required data.

Code of Federal Regulations, 2010 CFR

2010-07-01

... accordance with good engineering practice to assure that the engines covered by a certificate issued under... and conducted in accordance with good engineering practice to assure that the vehicles covered by a... systems are designed, using good engineering practice, to meet the standards of § 86.096-10 or § 86.098-11...

[Use of tissue engineering in the reconstruction of flexor tendon injuries of the hand].

PubMed

Bíró, Vilmos

2015-02-08

In his literary analysis, the author describes a novel method applied in the reconstruction of flexor tendon injuries of the hand. This procedure is named tissue engineering, and it is examined mainly under experimental circumstances. After definition of the method and descriptions of literary preliminaries the author discusses the healing process of the normal tendon tissue, then development of the scaffold, an important step of tissue engineering is described. After these topics the introduction of the pluripotent mesenchymal stem cells into the scaffold, and proliferation of these cells and development of the sliding systems are presented. The mechanical resisting ability of the formed tendon tissue is also discussed. Finally, the author concludes that as long as results of experimental research cannot be successfully applied into clinical practice, well-tried tendon reconstruction operations and high quality postoperative rehabilitation are needed.

A Framework to Evaluate the Impact of Armourstones on the Chemical Quality of Surface Water.

PubMed

Duester, Lars; Wahrendorf, Dierk-Steffen; Brinkmann, Corinna; Fabricius, Anne-Lena; Meermann, Björn; Pelzer, Juergen; Ecker, Dennis; Renner, Monika; Schmid, Harald; Ternes, Thomas A; Heininger, Peter

2017-01-01

Today, basic requirements for construction works include the protection of human health and of the environment. In the tension area between economic demands, circular flow economy and environmental safety, a link between the results from standardized leaching tests and the respective environmental quality standards must be created. To derive maximum release limits of metals and metalloids for armourstones in hydraulic engineering, this link is accomplished via a simple model approach. By treating natural materials and industrial by-products the same way, the article delivers an overview on the recent regulative situation in Europe as well as describes and discusses an innovative approach to derive maximum release limits for monolithic construction products in hydraulic engineering on a conceptual level. On a practical level, a list of test parameters is derived by connecting an extensive dataset (seven armourstone materials with five repetitions and 31 elements tested with the worldwide applied dynamic surface leaching test) with surface water quality standards and predicted no effect concentrations. Finally, the leaching tests results are compared with the envisaged maximum release limits, offering a direct comparison between natural materials and industrial by-products.

Tools for developing a quality management program: proactive tools (process mapping, value stream mapping, fault tree analysis, and failure mode and effects analysis).

PubMed

Rath, Frank

2008-01-01

This article examines the concepts of quality management (QM) and quality assurance (QA), as well as the current state of QM and QA practices in radiotherapy. A systematic approach incorporating a series of industrial engineering-based tools is proposed, which can be applied in health care organizations proactively to improve process outcomes, reduce risk and/or improve patient safety, improve through-put, and reduce cost. This tool set includes process mapping and process flowcharting, failure modes and effects analysis (FMEA), value stream mapping, and fault tree analysis (FTA). Many health care organizations do not have experience in applying these tools and therefore do not understand how and when to use them. As a result there are many misconceptions about how to use these tools, and they are often incorrectly applied. This article describes these industrial engineering-based tools and also how to use them, when they should be used (and not used), and the intended purposes for their use. In addition the strengths and weaknesses of each of these tools are described, and examples are given to demonstrate the application of these tools in health care settings.

Low-cost oblique illumination: an image quality assessment.

PubMed

Ruiz-Santaquiteria, Jesus; Espinosa-Aranda, Jose Luis; Deniz, Oscar; Sanchez, Carlos; Borrego-Ramos, Maria; Blanco, Saul; Cristobal, Gabriel; Bueno, Gloria

2018-01-01

We study the effectiveness of several low-cost oblique illumination filters to improve overall image quality, in comparison with standard bright field imaging. For this purpose, a dataset composed of 3360 diatom images belonging to 21 taxa was acquired. Subjective and objective image quality assessments were done. The subjective evaluation was performed by a group of diatom experts by psychophysical test where resolution, focus, and contrast were assessed. Moreover, some objective nonreference image quality metrics were applied to the same image dataset to complete the study, together with the calculation of several texture features to analyze the effect of these filters in terms of textural properties. Both image quality evaluation methods, subjective and objective, showed better results for images acquired using these illumination filters in comparison with the no filtered image. These promising results confirm that this kind of illumination filters can be a practical way to improve the image quality, thanks to the simple and low cost of the design and manufacturing process. (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE).

Searching the Internet for information on prostate cancer screening: an assessment of quality.

PubMed

Ilic, Dragan; Risbridger, Gail; Green, Sally

2004-07-01

To identify how on-line information relating to prostate cancer screening (PCS) is best sourced, whether through general, medical, or meta-search engines, and to assess the quality of that information. Websites providing information about PCS were searched across 15 search engines representing three distinct types: general, medical, and meta-search engines. The quality of on-line information was assessed using the DISCERN quality assessment tool. Quality performance characteristics were analyzed by performing Mann-Whitney U tests. Search engine efficiency was measured by each search query as a percentage of the relevant websites included for analysis from the total returned and analyzed by performing Kruskal-Wallis analysis of variance. Of 6690 websites reviewed, 84 unique websites were identified as providing information relevant to PCS. General and meta-search engines were significantly more efficient at retrieving relevant information on PCS compared with medical search engines. The quality of information was variable, with most of a poor standard. Websites that provided referral links to other resources and a citation of evidence provided a significantly better quality of information. In contrast, websites offering a direct service were more likely to provide a significantly poorer quality of information. The current lack of a clear consensus on guidelines and recommendation in published data is also reflected by the variable quality of information found on-line. Specialized medical search engines were no more likely to retrieve relevant, high-quality information than general or meta-search engines.

Competition preparation guideline in undergraduate program of information system school of Industrial Engineering Telkom University based on knowledge conversion

NASA Astrophysics Data System (ADS)

Darmawan, F. R.; Soesanto, R. P.; Kurniawati, A.; Kurniawan, M. T.

2017-12-01

The role of higher education in the development of science and technology is not only from the contribution of the high-quality alumni but also from the research and relevant competition with the needs of development in such a country. In a competition, the student can improve their soft skill and academic skill such as analytical and critical thinking, communication skills and mental. The number of relevant competition by students is also included in accreditation clause, therefore student involvement in competition is seen as important for the undergraduate program in University. The most problem in university is the high turnover from the student. Bachelor program in Indonesia usually takes 4 years to complete, and the high turnover causes the student come and go as they are a graduate from the institution without preserving the knowledge and experience from the competition to other students. This research aims to develop a guidance for competition preparation in the university by using knowledge conversion. The object of this research is an information system undergraduate program in the school of industrial engineering Telkom University. The best practice selection is done by using factor rating method. Delphi method is used to identify the criteria, and AHP method is used to calculate the weight of each criterion. From the factor rating result it is known that from 3 respondent, best practice from respondent A (7.321) is used for preparing the programming competition in an undergraduate program of information system in the school of industrial engineering Telkom University. FGD is done to disseminate the selected best practice into the process stakeholder which is head of the student affair of the school of industrial engineering, students, and laboratory assistants. Future research can be done to create more comprehensive criteria for selecting the best practice.

Project-oriented teaching model about specialized courses in the information age

NASA Astrophysics Data System (ADS)

Chen, Xiaodong; Wang, Jinjiang; Tian, Qingguo; Wang, Yi; Cai, Huaiyu

2017-08-01

Specialized courses play a significant role in the usage of basic knowledge in the practical application for engineering college students. The engineering data available has sharply increased since the beginning of the information age in the 20th century, providing much more approaches to study and practice. Therefore, how to guide students to make full use of resources for active engineering practice learning has become one of the key problems for specialized courses. This paper took the digital image processing course for opto-electronic information science and technology major as an example, discussed the teaching model of specialized course in the information age, put forward the "engineering resource oriented model", and fostered the ability of engineering students to use the basic knowledge to innovate and deal with specific project objectives. The fusion of engineering examples into practical training and teaching encourages students to practice independent engineering thinking.

The Roles of Engineering Notebooks in Shaping Elementary Engineering Student Discourse and Practice

ERIC Educational Resources Information Center

Hertel, Jonathan D.; Cunningham, Christine M.; Kelly, Gregory J.

2017-01-01

Engineering design challenges offer important opportunities for students to learn science and engineering knowledge and practices. This study examines how students' engineering notebooks across four units of the curriculum "Engineering is Elementary" (EiE) support student work during design challenges. Through educational ethnography and…

Aligning Practice to Policies: Changing the Culture to Recognize and Reward Teaching at Research Universities

PubMed Central

Dennin, Michael; Schultz, Zachary D.; Feig, Andrew; Finkelstein, Noah; Greenhoot, Andrea Follmer; Hildreth, Michael; Leibovich, Adam K.; Martin, James D.; Moldwin, Mark B.; O’Dowd, Diane K.; Posey, Lynmarie A.; Smith, Tobin L.; Miller, Emily R.

2017-01-01

Recent calls for improvement in undergraduate education within STEM (science, technology, engineering, and mathematics) disciplines are hampered by the methods used to evaluate teaching effectiveness. Faculty members at research universities are commonly assessed and promoted mainly on the basis of research success. To improve the quality of undergraduate teaching across all disciplines, not only STEM fields, requires creating an environment wherein continuous improvement of teaching is valued, assessed, and rewarded at various stages of a faculty member’s career. This requires consistent application of policies that reflect well-established best practices for evaluating teaching at the department, college, and university levels. Evidence shows most teaching evaluation practices do not reflect stated policies, even when the policies specifically espouse teaching as a value. Thus, alignment of practice to policy is a major barrier to establishing a culture in which teaching is valued. Situated in the context of current national efforts to improve undergraduate STEM education, including the Association of American Universities Undergraduate STEM Education Initiative, this essay discusses four guiding principles for aligning practice with stated priorities in formal policies: 1) enhancing the role of deans and chairs; 2) effectively using the hiring process; 3) improving communication; and 4) improving the understanding of teaching as a scholarly activity. In addition, three specific examples of efforts to improve the practice of evaluating teaching are presented as examples: 1) Three Bucket Model of merit review at the University of California, Irvine; (2) Evaluation of Teaching Rubric, University of Kansas; and (3) Teaching Quality Framework, University of Colorado, Boulder. These examples provide flexible criteria to holistically evaluate and improve the quality of teaching across the diverse institutions comprising modern higher education. PMID:29196430

Speech transport for packet telephony and voice over IP

NASA Astrophysics Data System (ADS)

Baker, Maurice R.

1999-11-01

Recent advances in packet switching, internetworking, and digital signal processing technologies have converged to allow realizable practical implementations of packet telephony systems. This paper provides a tutorial on transmission engineering for packet telephony covering the topics of speech coding/decoding, speech packetization, packet data network transport, and impairments which may negatively impact end-to-end system quality. Particular emphasis is placed upon Voice over Internet Protocol given the current popularity and ubiquity of IP transport.

HPCMP CREATE (trademark)-AV Quality Assurance: Best Practices for Validating and Supporting Computation-Based Engineering Software

DTIC Science & Technology

2015-09-30

Hariharan, Cynthia Dahl HPCMP, Lorton VA HPCMP CREATE 10501 Furnace Road Ste 101 Lorton, VA 22079-2624 HPCMP CREATE 10501 Furnace Road Ste 101...PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) HPCMP CREATE,,10501 Furnace Road Ste 101,,Lorton, ,VA, 22079 8. PERFORMING ORGANIZATION REPORT...Orlando, FL, 2015. [22] E. Reed and A. T. Egolf, "Coaxial Rotor Wake and Prop Induction Impact on a Horizontal Tail Using HPCMP CREATE™-AV

The flying classroom - a cost effective integrated approach to learning and teaching flight dynamics

NASA Astrophysics Data System (ADS)

Bromfield, Michael A.; Belberov, Aleksandar

2017-11-01

In the UK, the Royal Aeronautical Society recommends the inclusion of practical flight exercises for accredited undergraduate aerospace engineering programmes to enhance learning and student experience. The majority of academic institutions teaching aerospace in the UK separate the theory and practice of flight dynamics with students attending a series of lectures supplemented by an intensive one-day flight exercise. Performance and/or handling qualities flight tests are performed in a dedicated aircraft fitted with specialist equipment for the recording and presentation of flight data. This paper describes an innovative approach to better integrate theory and practice and the use of portable Commercial-off-The-Shelf (COTS) technologies to enable a range of standard, unmodified aircraft to be used. The integration of theory and practice has enriched learning and teaching, improved coursework grades and the student experience. The use of COTS and unmodified aircraft has reduced costs and enabled increased student participation.

Augmenting Chinese hamster genome assembly by identifying regions of high confidence.

PubMed

Vishwanathan, Nandita; Bandyopadhyay, Arpan A; Fu, Hsu-Yuan; Sharma, Mohit; Johnson, Kathryn C; Mudge, Joann; Ramaraj, Thiruvarangan; Onsongo, Getiria; Silverstein, Kevin A T; Jacob, Nitya M; Le, Huong; Karypis, George; Hu, Wei-Shou

2016-09-01

Chinese hamster Ovary (CHO) cell lines are the dominant industrial workhorses for therapeutic recombinant protein production. The availability of genome sequence of Chinese hamster and CHO cells will spur further genome and RNA sequencing of producing cell lines. However, the mammalian genomes assembled using shot-gun sequencing data still contain regions of uncertain quality due to assembly errors. Identifying high confidence regions in the assembled genome will facilitate its use for cell engineering and genome engineering. We assembled two independent drafts of Chinese hamster genome by de novo assembly from shotgun sequencing reads and by re-scaffolding and gap-filling the draft genome from NCBI for improved scaffold lengths and gap fractions. We then used the two independent assemblies to identify high confidence regions using two different approaches. First, the two independent assemblies were compared at the sequence level to identify their consensus regions as "high confidence regions" which accounts for at least 78 % of the assembled genome. Further, a genome wide comparison of the Chinese hamster scaffolds with mouse chromosomes revealed scaffolds with large blocks of collinearity, which were also compiled as high-quality scaffolds. Genome scale collinearity was complemented with EST based synteny which also revealed conserved gene order compared to mouse. As cell line sequencing becomes more commonly practiced, the approaches reported here are useful for assessing the quality of assembly and potentially facilitate the engineering of cell lines. Copyright © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Summary of the effects of engine throttle response on airplane formation-flying qualities

NASA Technical Reports Server (NTRS)

Walsh, Kevin R.

1993-01-01

A flight evaluation was conducted to determine the effect of engine throttle response characteristics on precision formation-flying qualities. A variable electronic throttle control system was developed and flight-tested on a TF-104G airplane with a J79-11B engine at the NASA Dryden Flight Research Facility. This airplane was chosen because of its known, very favorable thrust response characteristics. Ten research flights were flown to evaluate the effects of throttle gain, time delay, and fuel control rate limiting on engine handling qualities during a demanding precision wing formation task. Handling quality effects of lag filters and lead compensation time delays were also evaluated. The Cooper and Harper Pilot Rating Scale was used to assign levels of handling quality. Data from pilot ratings and comments indicate that throttle control system time delays and rate limits cause significant degradations in handling qualities. Threshold values for satisfactory (level 1) and adequate (level 2) handling qualities of these key variables are presented. These results may provide engine manufacturers with guidelines to assure satisfactory handling qualities in future engine designs.

Implementing Software Safety in the NASA Environment

NASA Technical Reports Server (NTRS)

Wetherholt, Martha S.; Radley, Charles F.

1994-01-01

Until recently, NASA did not consider allowing computers total control of flight systems. Human operators, via hardware, have constituted the ultimate safety control. In an attempt to reduce costs, NASA has come to rely more and more heavily on computers and software to control space missions. (For example. software is now planned to control most of the operational functions of the International Space Station.) Thus the need for systematic software safety programs has become crucial for mission success. Concurrent engineering principles dictate that safety should be designed into software up front, not tested into the software after the fact. 'Cost of Quality' studies have statistics and metrics to prove the value of building quality and safety into the development cycle. Unfortunately, most software engineers are not familiar with designing for safety, and most safety engineers are not software experts. Software written to specifications which have not been safety analyzed is a major source of computer related accidents. Safer software is achieved step by step throughout the system and software life cycle. It is a process that includes requirements definition, hazard analyses, formal software inspections, safety analyses, testing, and maintenance. The greatest emphasis is placed on clearly and completely defining system and software requirements, including safety and reliability requirements. Unfortunately, development and review of requirements are the weakest link in the process. While some of the more academic methods, e.g. mathematical models, may help bring about safer software, this paper proposes the use of currently approved software methodologies, and sound software and assurance practices to show how, to a large degree, safety can be designed into software from the start. NASA's approach today is to first conduct a preliminary system hazard analysis (PHA) during the concept and planning phase of a project. This determines the overall hazard potential of the system to be built. Shortly thereafter, as the system requirements are being defined, the second iteration of hazard analyses takes place, the systems hazard analysis (SHA). During the systems requirements phase, decisions are made as to what functions of the system will be the responsibility of software. This is the most critical time to affect the safety of the software. From this point, software safety analyses as well as software engineering practices are the main focus for assuring safe software. While many of the steps proposed in this paper seem like just sound engineering practices, they are the best technical and most cost effective means to assure safe software within a safe system.

GN&C Engineering Best Practices for Human-Rated Spacecraft Systems

NASA Technical Reports Server (NTRS)

Dennehy, Cornelius J.; Lebsock, Kenneth; West, John

2007-01-01

The NASA Engineering and Safety Center (NESC) recently completed an in-depth assessment to identify a comprehensive set of engineering considerations for the Design, Development, Test and Evaluation (DDT&E) of safe and reliable human-rated spacecraft systems. Reliability subject matter experts, discipline experts, and systems engineering experts were brought together to synthesize the current "best practices" both at the spacecraft system and subsystems levels. The objective of this paper is to summarize, for the larger Community of Practice, the initial set of Guidance, Navigation and Control (GN&C) engineering Best Practices as identified by this NESC assessment process.

GN&C Engineering Best Practices for Human-Rated Spacecraft System

NASA Technical Reports Server (NTRS)

Dennehy, Cornelius J.; Lebsock, Kenneth; West, John

2008-01-01

The NASA Engineering and Safety Center (NESC) recently completed an in-depth assessment to identify a comprehensive set of engineering considerations for the Design, Development, Test and Evaluation (DDT&E) of safe and reliable human-rated spacecraft systems. Reliability subject matter experts, discipline experts, and systems engineering experts were brought together to synthesize the current "best practices" both at the spacecraft system and subsystems levels. The objective of this paper is to summarize, for the larger Community of Practice, the initial set of Guidance, Navigation and Control (GN&C) engineering Best Practices as identified by this NESC assessment process.

GN&C Engineering Best Practices For Human-Rated Spacecraft Systems

NASA Technical Reports Server (NTRS)

Dennehy, Cornelius J.; Lebsock, Kenneth; West, John

2007-01-01

The NASA Engineering and Safety Center (NESC) recently completed an in-depth assessment to identify a comprehensive set of engineering considerations for the Design, Development, Test and Evaluation (DDT&E) of safe and reliable human-rated spacecraft systems. Reliability subject matter experts, discipline experts, and systems engineering experts were brought together to synthesize the current "best practices" both at the spacecraft system and subsystems levels. The objective of this paper is to summarize, for the larger Community of Practice, the initial set of Guidance, Navigation and Control (GN&C) engineering Best Practices as identified by this NESC assessment process.

APPLICATION OF THE 3D MODEL OF RAILWAY VIADUCTS TO COST ESTIMATION AND CONSTRUCTION

NASA Astrophysics Data System (ADS)

Fujisawa, Yasuo; Yabuki, Nobuyoshi; Igarashi, Zenichi; Yoshino, Hiroyuki

Three dimensional models of civil engineering structures are only partially used in either design or construction but not both. Research on integration of design, cost estimation and construction by 3Dmodels has not been heard in civil engineering domain yet. Using continuously a 3D product model of a structure from design to construction through estimation should improve the efficiency and decrease the occurrence of mistakes, hence enhancing the quality. In this research, we investigated the current practices of flow from design to construction, particularly focusing on cost estimation. Then, we identified advantages and issues on utilization of 3D design models to estimation and construction by applying 3D models to an actual railway construction project.

Designing a combined casting mold for manufacture of a gasoline centrifugal pump body using CAD/CAM-systems

NASA Astrophysics Data System (ADS)

Galin, N. E.; Ogol, I. I.; Chervach, Yu B.; Dammer, V. Kh; Ru, Jia Hong

2017-02-01

The present paper examines designing of a combined casting mold for manufacture of a gasoline centrifugal pump body. The paper offers technological solutions for obtaining high quality castings at the testing stage of the finished mold. The paper is intended for practical use and prepared by order of JSC ‘Tomsk Electrical Engineering Plant’ using software and equipment of the department ‘Technologies of Computer-Aided Machinery Manufacturing’ of the Tomsk Polytechnic University (TPU) under the economic contract within state import substitution program. In preparing the paper, CAD/CAM-systems KOMPAS-3D and PowerMILL were used. In 2015, the designed casting mold was introduced into the production process at JSC ‘Tomsk Electrical Engineering Plant’.

Protein engineering and its applications in food industry.

PubMed

Kapoor, Swati; Rafiq, Aasima; Sharma, Savita

2017-07-24

Protein engineering is a young discipline that has been branched out from the field of genetic engineering. Protein engineering is based on the available knowledge about the proteins structure/function(s), tools/instruments, software, bioinformatics database, available cloned gene, knowledge about available protein, vectors, recombinant strains and other materials that could lead to change in the protein backbone. Protein produced properly from genetic engineering process means a protein that is able to fold correctly and to do particular function(s) efficiently even after being subjected to engineering practices. Protein is modified through its gene or chemically. However, modification of protein through gene is easier. There is no specific limitation of Protein Engineering tools; any technique that can lead to change the protein constituent of amino acid and result in the modification of protein structure/function is in the frame of Protein Engineering. Meanwhile, there are some common tools used to reach a specific target. More active industrial and pharmaceutical based proteins have been invented by the field of Protein Engineering to introduce new function as well as to change its interaction with surrounding environment. A variety of protein engineering applications have been reported in the literature. These applications range from biocatalysis for food and industry to environmental, medical and nanobiotechnology applications. Successful combinations of various protein engineering methods had led to successful results in food industries and have created a scope to maintain the quality of finished product after processing.

The responsibilities of engineers.

PubMed

Smith, Justin; Gardoni, Paolo; Murphy, Colleen

2014-06-01

Knowledge of the responsibilities of engineers is the foundation for answering ethical questions about the work of engineers. This paper defines the responsibilities of engineers by considering what constitutes the nature of engineering as a particular form of activity. Specifically, this paper focuses on the ethical responsibilities of engineers qua engineers. Such responsibilities refer to the duties acquired in virtue of being a member of a group. We examine the practice of engineering, drawing on the idea of practices developed by philosopher Alasdair MacIntyre, and show how the idea of a practice is important for identifying and justifying the responsibilities of engineers. To demonstrate the contribution that knowledge of the responsibilities of engineers makes to engineering ethics, a case study from structural engineering is discussed. The discussion of the failure of the Sleipner A Platform off the coast of Norway in 1991 demonstrates how the responsibilities of engineers can be derived from knowledge of the nature of engineering and its context.

Examining the Extent to Which Select Teacher Preparation Experiences Inform Technology and Engineering Educators' Teaching of Science Content and Practices

ERIC Educational Resources Information Center

Love, Tyler S.

2015-01-01

With the recent release of the "Next Generation Science Standards" (NGSS) (NGSS Lead States, 2014b) science educators were expected to teach engineering content and practices within their curricula. However, technology and engineering (T&E) educators have been expected to teach content and practices from engineering and other…

The journey of primary care practices to meaningful use: a Colorado Beacon Consortium study.

PubMed

Fernald, Douglas H; Wearner, Robyn; Dickinson, W Perry

2013-01-01

The Health Information Technology for Economic and Clinical Health Act of 2009 provides for incentive payments through Medicare and Medicaid for clinicians who implement electronic health records (EHRs) and use this technology meaningfully to improve patient care. There are few comprehensive descriptions of how primary care practices achieve the meaningful use of clinical data, including the formal stage 1 meaningful use requirements. Evaluation of the Colorado Beacon Consortium project included iterative qualitative analysis of practice narratives, provider and staff interviews, and separate focus groups with quality improvement (QI) advisors and staff from the regional health information exchange (HIE). Most practices described significant realignment of practice priorities and aims, which often required substantial education and training of physicians and staff. Re-engineering office processes, data collection protocols, EHRs, staff roles, and practice culture comprised the primary effort and commitment to attest to stage 1 meaningful use and subsequent meaningful use of clinical data. While realizing important benefits, practices bore a significant burden in learning the true capabilities of their EHRs with little effective support from vendors. Attestation was an important initial milestone in the process, but practices faced substantial ongoing work to use their data meaningfully for patient care and QI. Key resources were instrumental to these practices: local technical EHR expertise; collaborative learning mechanisms; and regular contact and support from QI advisors. Meeting the stage 1 requirements for incentives under Medicare and Medicaid meaningful use criteria is the first waypoint in a longer journey by primary care practices to the meaningful use of electronic data to continuously improve the care and health of their patients. The intensive re-engineering effort for stage 1 yielded practice changes consistent with larger practice aims and goals. While many of these practices are now poised to use data meaningfully, faster progress will likely come with continued local QI and technical support and planned community-wide learning.

29 CFR 1910.1017 - Vinyl chloride.

Code of Federal Regulations, 2011 CFR

2011-07-01

... this section by engineering, work practice, and personal protective controls as follows: (1) Feasible engineering and work practice controls shall immediately be used to reduce exposures to at or below the permissible exposure limit. (2) Wherever feasible engineering and work practice controls which can be...

29 CFR 1910.1017 - Vinyl chloride.

Code of Federal Regulations, 2010 CFR

2010-07-01

... this section by engineering, work practice, and personal protective controls as follows: (1) Feasible engineering and work practice controls shall immediately be used to reduce exposures to at or below the permissible exposure limit. (2) Wherever feasible engineering and work practice controls which can be...

Paradigms for environmentally conscious manufacturing

NASA Astrophysics Data System (ADS)

Edinbarough, Immanuel A.; Wells, Wayne E.

2004-12-01

There are several stories involving the industries that pledge themselves for the environmentally conscious manufacturing practices. Paradigms for environmentally conscious manufacturing are associated with one of the aspects of environmental quality, protection, resource management, commitment or sustainability. The engineering rules of thumb that can easily be adopted by aspiring companies need identification. The underlying thread that unifies the efforts of environmentally conscious manufacturing companies, in offering the environmentally safe products to the world, is grouped and presented in the paper as paradigms for successful practices. The various ways in which a start up company, that wants to excel in environmentally conscious manufacturing, can position itself based on the paradigms is also discussed in the paper.

Epistemic Practices of Engineering for Education

ERIC Educational Resources Information Center

Cunningham, Christine M.; Kelly, Gregory J.

2017-01-01

Engineering offers new educational opportunities for students, yet also poses challenges about how to conceptualize the disciplinary core ideas, crosscutting concepts, and science and engineering practices of the disciplinary fields of engineering. In this paper, we draw from empirical studies of engineering in professional and school settings to…

Flood design recipes vs. reality: can predictions for ungauged basins be trusted?

NASA Astrophysics Data System (ADS)

Efstratiadis, A.; Koussis, A. D.; Koutsoyiannis, D.; Mamassis, N.

2013-12-01

Despite the great scientific and technological advances in flood hydrology, everyday engineering practices still follow simplistic approaches, such as the rational formula and the SCS-CN method combined with the unit hydrograph theory that are easy to formally implement in ungauged areas. In general, these "recipes" have been developed many decades ago, based on field data from few experimental catchments. However, many of them have been neither updated nor validated across all hydroclimatic and geomorphological conditions. This has an obvious impact on the quality and reliability of hydrological studies, and, consequently, on the safety and cost of the related flood protection works. Preliminary results, based on historical flood data from Cyprus and Greece, indicate that a substantial revision of many aspects of flood engineering procedures is required, including the regionalization formulas as well as the modelling concepts themselves. In order to provide a consistent design framework and to ensure realistic predictions of the flood risk (a key issue of the 2007/60/EU Directive) in ungauged basins, it is necessary to rethink the current engineering practices. In this vein, the collection of reliable hydrological data would be essential for re-evaluating the existing "recipes", taking into account local peculiarities, and for updating the modelling methodologies as needed.

47 CFR 73.508 - Standards of good engineering practice.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false Standards of good engineering practice. 73.508 Section 73.508 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES... engineering practice. (a) All noncommercial educational stations and LPFM stations operating with more than 10...

47 CFR 73.508 - Standards of good engineering practice.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 4 2014-10-01 2014-10-01 false Standards of good engineering practice. 73.508 Section 73.508 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES... engineering practice. (a) All noncommercial educational stations and LPFM stations operating with more than 10...

47 CFR 73.508 - Standards of good engineering practice.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 4 2012-10-01 2012-10-01 false Standards of good engineering practice. 73.508 Section 73.508 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES... engineering practice. (a) All noncommercial educational stations and LPFM stations operating with more than 10...

47 CFR 73.508 - Standards of good engineering practice.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 4 2013-10-01 2013-10-01 false Standards of good engineering practice. 73.508 Section 73.508 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES... engineering practice. (a) All noncommercial educational stations and LPFM stations operating with more than 10...

47 CFR 73.508 - Standards of good engineering practice.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false Standards of good engineering practice. 73.508 Section 73.508 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES... engineering practice. (a) All noncommercial educational stations and LPFM stations operating with more than 10...

Analysing the Integration of Engineering in Science Lessons with the Engineering-Infused Lesson Rubric

ERIC Educational Resources Information Center

Peterman, Karen; Daugherty, Jenny L.; Custer, Rodney L.; Ross, Julia M.

2017-01-01

Science teachers are being called on to incorporate engineering practices into their classrooms. This study explores whether the Engineering-Infused Lesson Rubric, a new rubric designed to target best practices in engineering education, could be used to evaluate the extent to which engineering is infused into online science lessons. Eighty lessons…

Problem Solving and Engineering Design, Introducing Bachelor Students to Engineering Practice at K. U. Leuven

ERIC Educational Resources Information Center

Heylen, Christel; Smet, Marc; Buelens, Hermans; Sloten, Jos Vander

2007-01-01

A present-day engineer has a large scientific knowledge; he is a team-player, eloquent communicator and life-long learner. At the Katholieke Universiteit Leuven, the course "Problem Solving and Engineering Design" introduces engineering students from the first semester onwards into real engineering practice and teamwork. Working in small…

Engineering youth service system infrastructure: Hawaii's continued efforts at large-scale implementation through knowledge management strategies.

PubMed

Nakamura, Brad J; Mueller, Charles W; Higa-McMillan, Charmaine; Okamura, Kelsie H; Chang, Jaime P; Slavin, Lesley; Shimabukuro, Scott

2014-01-01

Hawaii's Child and Adolescent Mental Health Division provides a unique illustration of a youth public mental health system with a long and successful history of large-scale quality improvement initiatives. Many advances are linked to flexibly organizing and applying knowledge gained from the scientific literature and move beyond installing a limited number of brand-named treatment approaches that might be directly relevant only to a small handful of system youth. This article takes a knowledge-to-action perspective and outlines five knowledge management strategies currently under way in Hawaii. Each strategy represents one component of a larger coordinated effort at engineering a service system focused on delivering both brand-named treatment approaches and complimentary strategies informed by the evidence base. The five knowledge management examples are (a) a set of modular-based professional training activities for currently practicing therapists, (b) an outreach initiative for supporting youth evidence-based practices training at Hawaii's mental health-related professional programs, (c) an effort to increase consumer knowledge of and demand for youth evidence-based practices, (d) a practice and progress agency performance feedback system, and (e) a sampling of system-level research studies focused on understanding treatment as usual. We end by outlining a small set of lessons learned and a longer term vision for embedding these efforts into the system's infrastructure.

Engineers' Professional Learning: A Practice-Theory Perspective

ERIC Educational Resources Information Center

Reich, Ann; Rooney, Donna; Gardner, Anne; Willey, Keith; Boud, David; Fitzgerald, Terry

2015-01-01

With the increasing challenges facing professional engineers working in more complex, global and interdisciplinary contexts, different approaches to understanding how engineers practice and learn are necessary. This paper draws on recent research in the social sciences from the field of workplace learning, to suggest that a practice-theory…

Analyses of Scientific, Technological, and Engineering Parameters of CFPS Operation Methodology and Practices

DTIC Science & Technology

1981-03-01

production mode, but rather always in a kitchen mode. From this it followed that the personnel savings, material savings, and product quality benefits ...largest size CFPF ever contemplated. 10 CREAMED GROUND BEEF 50 40 -- DESIGN c* 30- ,20- 10 ROAST BEEF 40--------DESIGN ~30 S20- 10- 0- 50- CHILI ...Spread Midpoint (M (M Creamed Ground Beef 20 -21 Roast Beef 37 +8.5 Chili Macaroni 31 -18 17 it is obvious from these figures that the operation was

Effect of Tooling Material on the Internal Surface Quality of Ti6Al4V Parts Fabricated by Hot Isostatic Pressing

NASA Astrophysics Data System (ADS)

Cai, Chao; Song, Bo; Wei, Qingsong; Yan, Wu; Xue, Pengju; Shi, Yusheng

2017-01-01

For the net-shape hot isostatic pressing (HIP) process, control of the internal surface roughness of as-HIPped parts remains a challenge for practical engineering. To reveal the evolution mechanism of the internal surface of the parts during the HIP process, the effect of different tooling materials (H13, T8, Cr12 steel, and graphite) as internal cores on the interfacial diffusion and surface roughness was systematically studied.

Water-quality characteristics and trends for selected wells possibly influenced by wastewater disposal at the Idaho National Laboratory, Idaho, 1981-2012

USGS Publications Warehouse

Davis, Linda C.; Bartholomay, Roy C.; Fisher, Jason C.; Maimer, Neil V.

2015-01-01

Volatile organic compound concentration trends were analyzed for nine aquifer wells. Trend test results indicated an increasing trend for carbon tetrachloride for the Radioactive Waste Management Complex Production Well for the period 1987–2012; however, trend analyses of data collected since 2005 show no statistically significant trend indicating that engineering practices designed to reduce movement of volatile organic compounds to the aquifer may be having a positive effect on the aquifer.

Image-Directed Fine-needle Aspiration Biopsy of the Thyroid with Safety-engineered Devices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sibbitt, Randy R., E-mail: THESIBB2@aol.com; Palmer, Dennis J., E-mail: lyonscreek@aol.com; Sibbitt, Wilmer L., E-mail: wsibbitt@salud.unm.edu

2011-10-15

Purpose: The purpose of the present study was to integrate safety-engineered devices into outpatient fine-needle aspiration (FNA) biopsy of the thyroid in an interventional radiology practice. Materials and Methods: The practice center is a tertiary referral center for image-directed FNA thyroid biopsies in difficult patients referred by the primary care physician, endocrinologist, or otolaryngologist. As a departmental quality of care and safety improvement program, we instituted integration of safety devices into our thyroid biopsy procedures and determined the effect on outcome (procedural pain, diagnostic biopsies, inadequate samples, complications, needlesticks to operator, and physician satisfaction) before institution of safety devices (54more » patients) and after institution of safety device implementation (56 patients). Safety devices included a patient safety technology-the mechanical aspirating syringe (reciprocating procedure device), and a health care worker safety technology (antineedlestick safety needle). Results: FNA of thyroid could be readily performed with the safety devices. Safety-engineered devices resulted in a 49% reduction in procedural pain scores (P < 0.0001), a 56% reduction in significant pain (P < 0.002), a 21% increase in operator satisfaction (P < 0.0001), and a 5% increase in diagnostic specimens (P = 0.5). No needlesticks to health care workers or patient injuries occurred during the study. Conclusions: Safety-engineered devices to improve both patient and health care worker safety can be successfully integrated into diagnostic FNA of the thyroid while maintaining outcomes and improving safety.« less

MOOC construction and application in professional degree postgraduate education: taking Introduction to Engineering Optics as an example

NASA Astrophysics Data System (ADS)

Hu, Feng; Zhou, Jin-peng; Wang, Xing-shu

2017-08-01

Aiming at the deficiency of the traditional postgraduate education mode for professional degree, such as the conflict between work and study, restricted supply and demand and poor efficiency of course teaching, the emergence of Massive Open Online Course (MOOC) which has large scale, online and open features can make up for the shortage of traditional professional degree postgraduate education mode by introducing MOOC teaching mode. However, it is still a fangle to integrate MOOC into the traditional postgraduate education for professional degree and there are no standard methods for reference in the construction of MOOC courses as well as the corresponding evaluations. In this paper, the construction method and practical experience of MOOC courses for professional degree postgraduate education are discussed in details, based on the MOOC course of Introduction to Engineering Optics. Firstly, the principle of MOOC course contents for professional degree postgraduate education is introduced from the aspects of students' demand, MOOC features and practical applications. Secondly, the optimization of MOOC teaching mode is discussed in order to improve the teaching quality and learning efficiency. Thirdly, in order to overcome the deficiency of current MOOC examination schemes, a novel MOOC evaluation scheme is proposed which is capable of assessing students' learning attitude as well as their ability and performance differences. Finally, a practical summary is given about how to integrate the MOOC teaching mode into the postgraduate education for professional degree, including the constructions of teaching team, course system as well as other factors. From the paper, we can conclude that the integration of MOOC teaching mode into the postgraduate education for professional degree will improve the teaching quality and efficiency.

How an Integrative STEM Curriculum Can Benefit Students in Engineering Design Practices

ERIC Educational Resources Information Center

Fan, Szu-Chun; Yu, Kuang-Chao

2017-01-01

STEM-oriented engineering design practice has become recognized increasingly by technology education professionals in Taiwan. This study sought to examine the effectiveness of the application of an integrative STEM approach within engineering design practices in high school technology education in Taiwan. A quasi-experimental study was conducted…

Core Ideas of Engineering and Technology

ERIC Educational Resources Information Center

Sneider, Cary

2012-01-01

Last month, Rodger Bybee's article, "Scientific and Engineering Practices in K-12 Classrooms," provided an overview of Chapter 3 in "A Framework for K-12 Science Education: Practices, Crosscutting Concepts, and Core Ideas" (NRC 2011). Chapter 3 describes the practices of science and engineering that students are expected to develop during 13 years…

The use of moral dilemmas for teaching agricultural engineers.

PubMed

Lozano, J Félix; Palau-Salvador, Guillermo; Gozálvez, Vincent; Boni, Alejandra

2006-04-01

Agricultural engineers' jobs are especially related to sustainability and earth life issues. They usually work with plants or animals, and the aim of their work is often linked to producing food to allow people to improve their quality of life. Taking into account this dual function, the moral requirements of their day-to-day professional practice are arguably greater than those of other professions. Agricultural engineers can develop their ability to live up to this professional responsibility by receiving ethical training during their university studies, not only by taking courses specifically devoted to ethics, but also by having to deal with moral questions that are integrated into their technical courses through a program of Ethics Across the Curriculum (EAC). The authors feel that a suitable pedagogical technique for achieving this goal is the use of moral dilemmas, following Kohlberg's theory of levels of morality (1981), with the final objective of attaining a post-conventional level. This paper examines the possibilities and limitations of using moral dilemmas as a pedagogical technique for training agricultural engineers. The cases, discussions, and evaluation used in the Agricultural Engineering Department of the Technical University of Valencia (Spain) are also presented.

Does Curriculum Practical Training Affect Engineers' Workplace Outcomes? Evidence from an Engineer Survey in China

ERIC Educational Resources Information Center

Li, Jing; Zhang, Yu; Tsang, Mun; Li, Manli

2015-01-01

With the increasing attention to STEM (Science, Technology, Engineering, and Math), hands-on Curriculum Practical Training (CPT) has been expanding rapidly worldwide as a requirement of the undergraduate engineering education. In China, a typical CPT for undergraduate engineering students requires several weeks of hands-on training in the…

Practical Strategy on the Subject of “Science and Ethics” for Overcoming Hybrid Engineering Ethics Education

NASA Astrophysics Data System (ADS)

Yasui, Yoshiaki

The issue of economic globalization and JABEE (Japan Accreditation Board for Engineering Education) mean that education on engineering ethics has now become increasingly important for science-engineering students who will become the next generation of engineers. This is clearly indicated when engineers are made professionally responsible for various unfortunate accidents that happen during daily life in society. Learning hybrid engineering ethics is an essential part of the education of the humanities and sciences. This paper treats the contents for the subject of “Science and Ethics” drawing on several years of practice and the fruits of studying science and engineering ethics at the faculty of science-engineering in university. This paper can be considered to be a practical strategy to the formation of morality.

A Design Tool for Liquid Rocket Engine Injectors

NASA Technical Reports Server (NTRS)

Farmer, R.; Cheng, G.; Trinh, H.; Tucker, K.

2000-01-01

A practical design tool which emphasizes the analysis of flowfields near the injector face of liquid rocket engines has been developed and used to simulate preliminary configurations of NASA's Fastrac and vortex engines. This computational design tool is sufficiently detailed to predict the interactive effects of injector element impingement angles and points and the momenta of the individual orifice flows and the combusting flow which results. In order to simulate a significant number of individual orifices, a homogeneous computational fluid dynamics model was developed. To describe sub- and supercritical liquid and vapor flows, the model utilized thermal and caloric equations of state which were valid over a wide range of pressures and temperatures. The model was constructed such that the local quality of the flow was determined directly. Since both the Fastrac and vortex engines utilize RP-1/LOX propellants, a simplified hydrocarbon combustion model was devised in order to accomplish three-dimensional, multiphase flow simulations. Such a model does not identify drops or their distribution, but it does allow the recirculating flow along the injector face and into the acoustic cavity and the film coolant flow to be accurately predicted.

Engineering and Language Discourse Collaboration: Practice Realities

ERIC Educational Resources Information Center

Harran, Marcelle

2011-01-01

This article describes a situated engineering project at a South African HE institution which is underpinned by collaboration between Applied Language Studies (DALS) and Mechanical Engineering. The collaboration requires language practitioners and engineering experts to negotiate and collaborate on academic literacies practices, discourse…

Activist engineering: changing engineering practice by deploying praxis.

PubMed

Karwat, Darshan M A; Eagle, Walter E; Wooldridge, Margaret S; Princen, Thomas E

2015-02-01

In this paper, we reflect on current notions of engineering practice by examining some of the motives for engineered solutions to the problem of climate change. We draw on fields such as science and technology studies, the philosophy of technology, and environmental ethics to highlight how dominant notions of apoliticism and ahistoricity are ingrained in contemporary engineering practice. We argue that a solely technological response to climate change does not question the social, political, and cultural tenet of infinite material growth, one of the root causes of climate change. In response to the contemporary engineering practice, we define an activist engineer as someone who not only can provide specific engineered solutions, but who also steps back from their work and tackles the question, What is the real problem and does this problem "require" an engineering intervention? Solving complex problems like climate change requires radical cultural change, and a significant obstacle is educating engineers about how to conceive of and create "authentic alternatives," that is, solutions that differ from the paradigm of "technologically improving" our way out of problems. As a means to realize radically new solutions, we investigate how engineers might (re)deploy the concept of praxis, which raises awareness in engineers of the inherent politics of technological design. Praxis empowers engineers with a more comprehensive understanding of problems, and thus transforms technologies, when appropriate, into more socially just and ecologically sensitive interventions. Most importantly, praxis also raises a radical alternative rarely considered-not "engineering a solution." Activist engineering offers a contrasting method to contemporary engineering practice and leads toward social justice and ecological protection through problem solving by asking not, How will we technologize our way out of the problems we face? but instead, What really needs to be done?

Ear-Shaped Stable Auricular Cartilage Engineered from Extensively Expanded Chondrocytes in an Immunocompetent Experimental Animal Model

PubMed Central

Pomerantseva, Irina; Bichara, David A.; Tseng, Alan; Cronce, Michael J.; Cervantes, Thomas M.; Kimura, Anya M.; Neville, Craig M.; Roscioli, Nick; Vacanti, Joseph P.; Randolph, Mark A.

2016-01-01

Advancement of engineered ear in clinical practice is limited by several challenges. The complex, largely unsupported, three-dimensional auricular neocartilage structure is difficult to maintain. Neocartilage formation is challenging in an immunocompetent host due to active inflammatory and immunological responses. The large number of autologous chondrogenic cells required for engineering an adult human-sized ear presents an additional challenge because primary chondrocytes rapidly dedifferentiate during in vitro culture. The objective of this study was to engineer a stable, human ear-shaped cartilage in an immunocompetent animal model using expanded chondrocytes. The impact of basic fibroblast growth factor (bFGF) supplementation on achieving clinically relevant expansion of primary sheep chondrocytes by in vitro culture was determined. Chondrocytes expanded in standard medium were either combined with cryopreserved, primary passage 0 chondrocytes at the time of scaffold seeding or used alone as control. Disk and human ear-shaped scaffolds were made from porous collagen; ear scaffolds had an embedded, supporting titanium wire framework. Autologous chondrocyte-seeded scaffolds were implanted subcutaneously in sheep after 2 weeks of in vitro incubation. The quality of the resulting neocartilage and its stability and retention of the original ear size and shape were evaluated at 6, 12, and 20 weeks postimplantation. Neocartilage produced from chondrocytes that were expanded in the presence of bFGF was superior, and its quality improved with increased implantation time. In addition to characteristic morphological cartilage features, its glycosaminoglycan content was high and marked elastin fiber formation was present. The overall shape of engineered ears was preserved at 20 weeks postimplantation, and the dimensional changes did not exceed 10%. The wire frame within the engineered ear was able to withstand mechanical forces during wound healing and neocartilage maturation and prevented shrinkage and distortion. This is the first demonstration of a stable, ear-shaped elastic cartilage engineered from auricular chondrocytes that underwent clinical-scale expansion in an immunocompetent animal over an extended period of time. PMID:26529401

Renovation of a mechanical engineering senior design class to an industry-tied and team-oriented course

NASA Astrophysics Data System (ADS)

Liu, Yucheng

2017-11-01

In this work, an industry-based and team-oriented education model was established based on a traditional mechanical engineering (ME) senior design class in order to better prepare future engineers and leaders so as to meet the increasing demand for high-quality engineering graduates. In the renovated curriculum, industry-sponsored projects became the most important course component and critical assessment tool, from which problem-solving skills as well as employability skills of the ME students can be fully developed. Hands-on experiences in finite element analysis (FEA) modelling and simulation were also added into the renovated curriculum to promote the application of FEA on engineering design and assessment. Evaluation of the renovated course was conducted using two instruments and the results have shown that the course made the ME senior students more prepared for their future career and a win-win model was created between the industry partner and the ME programme through it. Impact of the renovated syllabus on Accreditation Board for Engineering Technology goals was discussed. Based on the current progress, a more substantial change is being planned to further improve the effectiveness and practicability of this design course. The renovated course was started to offer to the ME senior students at Mississippi State University.

Parametric diagnosis of the adaptive gas path in the automatic control system of the aircraft engine

NASA Astrophysics Data System (ADS)

Kuznetsova, T. A.

2017-01-01

The paper dwells on the adaptive multimode mathematical model of the gas-turbine aircraft engine (GTE) embedded in the automatic control system (ACS). The mathematical model is based on the throttle performances, and is characterized by high accuracy of engine parameters identification in stationary and dynamic modes. The proposed on-board engine model is the state space linearized low-level simulation. The engine health is identified by the influence of the coefficient matrix. The influence coefficient is determined by the GTE high-level mathematical model based on measurements of gas-dynamic parameters. In the automatic control algorithm, the sum of squares of the deviation between the parameters of the mathematical model and real GTE is minimized. The proposed mathematical model is effectively used for gas path defects detecting in on-line GTE health monitoring. The accuracy of the on-board mathematical model embedded in ACS determines the quality of adaptive control and reliability of the engine. To improve the accuracy of identification solutions and sustainability provision, the numerical method of Monte Carlo was used. The parametric diagnostic algorithm based on the LPτ - sequence was developed and tested. Analysis of the results suggests that the application of the developed algorithms allows achieving higher identification accuracy and reliability than similar models used in practice.

Comparison of quality of internet pages on human papillomavirus immunization in Italian and in English.

PubMed

Tozzi, Alberto Eugenio; Buonuomo, Paola Sabrina; Ciofi degli Atti, Marta Luisa; Carloni, Emanuela; Meloni, Marco; Gamba, Fiorenza

2010-01-01

Information available on the Internet about immunizations may influence parents' perception about human papillomavirus (HPV) immunization and their attitude toward vaccinating their daughters. We hypothesized that the quality of information on HPV available on the Internet may vary with language and with the level of knowledge of parents. To this end we compared the quality of a sample of Web pages in Italian with a sample of Web pages in English. Five reviewers assessed the quality of Web pages retrieved with popular search engines using criteria adapted from the Good Information Practice Essential Criteria for Vaccine Safety Web Sites recommended by the World Health Organization. Quality of Web pages was assessed in the domains of accessibility, credibility, content, and design. Scores in these domains were compared through nonparametric statistical tests. We retrieved and reviewed 74 Web sites in Italian and 117 in English. Most retrieved Web pages (33.5%) were from private agencies. Median scores were higher in Web pages in English compared with those in Italian in the domain of accessibility (p < .01), credibility (p < .01), and content (p < .01). The highest credibility and content scores were those of Web pages from governmental agencies or universities. Accessibility scores were positively associated with content scores (p < .01) and with credibility scores (p < .01). A total of 16.2% of Web pages in Italian opposed HPV immunization compared with 6.0% of those in English (p < .05). Quality of information and number of Web pages opposing HPV immunization may vary with the Web site language. High-quality Web pages on HPV, especially from public health agencies and universities, should be easily accessible and retrievable with common Web search engines. Copyright 2010 Society for Adolescent Medicine. Published by Elsevier Inc. All rights reserved.

The implementation of tissue banking experiences for setting up a cGMP cell manufacturing facility.

PubMed

Arjmand, Babak; Emami-Razavi, Seyed Hassan; Larijani, Bagher; Norouzi-Javidan, Abbas; Aghayan, Hamid Reza

2012-12-01

Cell manufacturing for clinical applications is a unique form of biologics manufacturing that relies on maintenance of stringent work practices designed to ensure product consistency and prevent contamination by microorganisms or by another patient's cells. More extensive, prolonged laboratory processes involve greater risk of complications and possibly adverse events for the recipient, and so the need for control is correspondingly greater. To minimize the associate risks of cell manufacturing adhering to international quality standards is critical. Current good tissue practice (cGTP) and current good manufacturing practice (cGMP) are examples of general standards that draw a baseline for cell manufacturing facilities. In recent years, stem cell researches have found great public interest in Iran and different cell therapy projects have been started in country. In this review we described the role of our tissue banking experiences in establishing a new cGMP cell manufacturing facility. The authors concluded that, tissue banks and tissue banking experts can broaden their roles from preparing tissue grafts to manufacturing cell and tissue engineered products for translational researches and phase I clinical trials. Also they can collaborate with cell processing laboratories to develop SOPs, implement quality management system, and design cGMP facilities.

IEC 61511 and the capital project process--a protective management system approach.

PubMed

Summers, Angela E

2006-03-17

This year, the process industry has reached an important milestone in process safety-the acceptance of an internationally recognized standard for safety instrumented systems (SIS). This standard, IEC 61511, documents good engineering practice for the assessment, design, operation, maintenance, and management of SISs. The foundation of the standard is established by several requirements in Part 1, Clauses 5-7, which cover the development of a management system aimed at ensuring that functional safety is achieved. The management system includes a quality assurance process for the entire SIS lifecycle, requiring the development of procedures, identification of resources and acquisition of tools. For maximum benefit, the deliverables and quality control checks required by the standard should be integrated into the capital project process, addressing safety, environmental, plant productivity, and asset protection. Industry has become inundated with a multitude of programs focusing on safety, quality, and cost performance. This paper introduces a protective management system, which builds upon the work process identified in IEC 61511. Typical capital project phases are integrated with the management system to yield one comprehensive program to efficiently manage process risk. Finally, the paper highlights areas where internal practices or guidelines should be developed to improve program performance and cost effectiveness.

Automobile Engine Control Parameters Study : Volume 1. Summary and Status of Domestic Engine Control Practice

DOT National Transportation Integrated Search

1977-02-01

This report contains the results of a study to evaluate automobile engine control parameters and their effects on vehicle fuel economy and emissions. Volume I presents detailed technical information on the engine control practices used by selected do...

Improvement of laboratory turnaround time using lean methodology.

PubMed

Gupta, Shradha; Kapil, Sahil; Sharma, Monica

2018-05-14

Purpose The purpose of this paper is to discuss the implementation of lean methodology to reduce the turnaround time (TAT) of a clinical laboratory in a super speciality hospital. Delays in report delivery lead to delayed diagnosis increased waiting time and decreased customer satisfaction. The reduction in TAT will lead to increased patient satisfaction, quality of care, employee satisfaction and ultimately the hospital's revenue. Design/methodology/approach The generic causes resulting in increasing TAT of clinical laboratories were identified using lean tools and techniques such as value stream mapping (VSM), Gemba, Pareto Analysis and Root Cause Analysis. VSM was used as a tool to analyze the current state of the process and further VSM was used to design the future state with suggestions for process improvements. Findings This study identified 12 major non-value added factors for the hematology laboratory and 5 major non-value added factors for the biochemistry lab which were acting as bottlenecks resulting in limiting throughput. A four-month research study by the authors together with hospital quality department and laboratory staff members led to reduction of the average TAT from 180 to 95minutes in the hematology lab and from 268 to 208 minutes in the biochemistry lab. Practical implications Very few improvement initiatives in Indian healthcare are based on industrial engineering tools and techniques, which might be due to a lack of interaction between healthcare and engineering. The study provides a positive outcome in terms of improving the efficiency of services in hospitals and identifies a scope for lean in the Indian healthcare sector. Social implications Applying lean in the Indian healthcare sector gives its own potential solution to the problem caused, due to a wide gap between lean accessibility and lean implementation. Lean helped in changing the mindset of an organization toward providing the highest quality of services with faster delivery at an optimal cost. Originality/value This paper is an effort to reduce the gap between healthcare and industrial engineering and enhancing the use of lean practices in Indian healthcare. The study is motivated toward implementing lean methodology successfully in services.

Quality requirements for reclaimed/recycled water

NASA Technical Reports Server (NTRS)

Janik, Daniel S.; Sauer, Richard L.; Pierson, Duane L.; Thorstenson, Yvonne R.

1987-01-01

Water used during current and previous space missions has been either carried or made aloft. Future human space endeavors will require some form of water reclamation and recycling. There is little experience in the U.S. space program with this technology. Water reclamation and recycling constitute engineering challenges of the broadest nature that will require an intensive research and development effort if this technology is to mature in time for practical use on the proposed U.S. Space Station. In order for this to happen, reclaimed/recycled water specifications will need to be devised to guide engineering development. Present NASA Potable Water Specifications are not applicable to reclaimed or recycled water. Adequate specifications for ensuring the quality of the reclaimed or recycled potable water system is reviewed, limitations of present water specifications are examined, world experience with potable water reclamation/recycling systems and systems analogs is reviewed, and an approach to developing pertinent biomedical water specifications for spacecraft is presented. Space Station water specifications should be designed to ensure the health of all likely spacecraft inhabitants including man, animals, and plants.

P-12 Engineering Education Research and Practice

ERIC Educational Resources Information Center

Moore, Tamara; Richards, Larry G.

2012-01-01

This special issue of "Advances in Engineering Education" explores recent developments in P-12 Engineering Education. It includes papers devoted to research and practice, and reports some of the most exciting work in the field today. In our Call of Papers, we solicited two types of papers: Research papers and Practice papers. The former…

Engineering Employment Characteristics. Engineering Education and Practice in the United States.

ERIC Educational Resources Information Center

National Academy of Sciences - National Research Council, Washington, DC. Commission on Engineering and Technical Systems.

This panel report was prepared as part of the study of engineering education and practice conducted under the guidance of the National Research Council's Committee on the Education and Utilization of the Engineer. The panel's goal was to provide a data base that describes the engineering work force, its main activities, capabilities, and principal…

Present and Future in Quality Assurance of Engineering Education in Japan

NASA Astrophysics Data System (ADS)

Aoki, Kyosuke; Nozawa, Tsunenori

The quality of engineering education in our country should be assured by the self-assessment of the institution that conducts education. Recent evaluation and/or accreditation are intended to assist and promote such achievement. The certified evaluation and accreditation for colleges of technology and the audit by the Japan Accreditation Board for Engineering Education (JABEE) have been carried out on the engineering education. In this article we will discuss the ways of accreditation of both systems and try to consider future for the quality assurance of the engineering education in Japan.

Improvement of Saccharomyces yeast strains used in brewing, wine making and baking.

PubMed

Donalies, Ute E B; Nguyen, Huyen T T; Stahl, Ulf; Nevoigt, Elke

2008-01-01

Yeast was the first microorganism domesticated by mankind. Indeed, the production of bread and alcoholic beverages such as beer and wine dates from antiquity, even though the fact that the origin of alcoholic fermentation is a microorganism was not known until the nineteenth century. The use of starter cultures in yeast industries became a common practice after methods for the isolation of pure yeast strains were developed. Moreover, effort has been undertaken to improve these strains, first by classical genetic methods and later by genetic engineering. In general, yeast strain development has aimed at improving the velocity and efficiency of the respective production process and the quality of the final products. This review highlights the achievements in genetic engineering of Saccharomyces yeast strains applied in food and beverage industry.

Engineers' professional learning: a practice-theory perspective

NASA Astrophysics Data System (ADS)

Reich, Ann; Rooney, Donna; Gardner, Anne; Willey, Keith; Boud, David; Fitzgerald, Terry

2015-07-01

With the increasing challenges facing professional engineers working in more complex, global and interdisciplinary contexts, different approaches to understanding how engineers practice and learn are necessary. This paper draws on recent research in the social sciences from the field of workplace learning, to suggest that a practice-theory perspective on engineers' professional learning is fruitful. It shifts the focus from the attributes of the individual learner (knowledge, skills and attitudes) to the attributes of the practice (interactions, materiality, opportunities and challenges). Learning is thus more than the technical acquisition and transfer of knowledge, but a complex bundle of activities, that is, social, material, embodied and emerging. The paper is illustrated with examples from a research study of the learning of experienced engineers in the construction industry to demonstrate common practices - site walks and design review meetings - in which learning takes place.

Quality Assurance and Accreditation of Engineering Education in Jordan

ERIC Educational Resources Information Center

Aqlan, Faisal; Al-Araidah, Omar; Al-Hawari, Tarek

2010-01-01

This paper provides a study of the quality assurance and accreditation in the Jordanian higher education sector and focuses mainly on engineering education. It presents engineering education, accreditation and quality assurance in Jordan and considers the Jordan University of Science and Technology (JUST) for a case study. The study highlights the…

Application of a Sensemaking Approach to Ethics Training in the Physical Sciences and Engineering

NASA Astrophysics Data System (ADS)

Kligyte, Vykinta; Marcy, Richard T.; Waples, Ethan P.; Sevier, Sydney T.; Godfrey, Elaine S.; Mumford, Michael D.; Hougen, Dean F.

2008-06-01

Integrity is a critical determinant of the effectiveness of research organizations in terms of producing high quality research and educating the new generation of scientists. A number of responsible conduct of research (RCR) training programs have been developed to address this growing organizational concern. However, in spite of a significant body of research in ethics training, it is still unknown which approach has the highest potential to enhance researchers' integrity. One of the approaches showing some promise in improving researchers' integrity has focused on the development of ethical decision-making skills. The current effort proposes a novel curriculum that focuses on broad metacognitive reasoning strategies researchers use when making sense of day-to-day social and professional practices that have ethical implications for the physical sciences and engineering. This sensemaking training has been implemented in a professional sample of scientists conducting research in electrical engineering, atmospheric and computer sciences at a large multi-cultural, multi-disciplinary, and multi-university research center. A pre-post design was used to assess training effectiveness using scenario-based ethical decision-making measures. The training resulted in enhanced ethical decision-making of researchers in relation to four ethical conduct areas, namely data management, study conduct, professional practices, and business practices. In addition, sensemaking training led to researchers' preference for decisions involving the application of the broad metacognitive reasoning strategies. Individual trainee and training characteristics were used to explain the study findings. Broad implications of the findings for ethics training development, implementation, and evaluation in the sciences are discussed.

Application of a sensemaking approach to ethics training in the physical sciences and engineering.

PubMed

Kligyte, Vykinta; Marcy, Richard T; Waples, Ethan P; Sevier, Sydney T; Godfrey, Elaine S; Mumford, Michael D; Hougen, Dean F

2008-06-01

Integrity is a critical determinant of the effectiveness of research organizations in terms of producing high quality research and educating the new generation of scientists. A number of responsible conduct of research (RCR) training programs have been developed to address this growing organizational concern. However, in spite of a significant body of research in ethics training, it is still unknown which approach has the highest potential to enhance researchers' integrity. One of the approaches showing some promise in improving researchers' integrity has focused on the development of ethical decision-making skills. The current effort proposes a novel curriculum that focuses on broad metacognitive reasoning strategies researchers use when making sense of day-to-day social and professional practices that have ethical implications for the physical sciences and engineering. This sensemaking training has been implemented in a professional sample of scientists conducting research in electrical engineering, atmospheric and computer sciences at a large multi-cultural, multi-disciplinary, and multi-university research center. A pre-post design was used to assess training effectiveness using scenario-based ethical decision-making measures. The training resulted in enhanced ethical decision-making of researchers in relation to four ethical conduct areas, namely data management, study conduct, professional practices, and business practices. In addition, sensemaking training led to researchers' preference for decisions involving the application of the broad metacognitive reasoning strategies. Individual trainee and training characteristics were used to explain the study findings. Broad implications of the findings for ethics training development, implementation, and evaluation in the sciences are discussed.

Factors associated with health-related quality of life among operating engineers.

PubMed

Choi, Seung Hee; Redman, Richard W; Terrell, Jeffrey E; Pohl, Joanne M; Duffy, Sonia A

2012-11-01

Because health-related quality of life among blue-collar workers has not been well studied, the purpose of this study was to determine factors associated with health-related quality of life among Operating Engineers. With cross-sectional data from a convenience sample of 498 Operating Engineers, personal and health behavioral factors associated with health-related quality of life were examined. Multivariate linear regression analysis revealed that personal factors (older age, being married, more medical comorbidities, and depression) and behavioral factors (smoking, low fruit and vegetable intake, low physical activity, high body mass index, and low sleep quality) were associated with poor health-related quality of life. Operating Engineers are at risk for poor health-related quality of life. Underlying medical comorbidities and depression should be well managed. Worksite wellness programs addressing poor health behaviors may be beneficial.

Towards a mature measurement environment: Creating a software engineering research environment

NASA Technical Reports Server (NTRS)

Basili, Victor R.

1990-01-01

Software engineering researchers are building tools, defining methods, and models; however, there are problems with the nature and style of the research. The research is typically bottom-up, done in isolation so the pieces cannot be easily logically or physically integrated. A great deal of the research is essentially the packaging of a particular piece of technology with little indication of how the work would be integrated with other prices of research. The research is not aimed at solving the real problems of software engineering, i.e., the development and maintenance of quality systems in a productive manner. The research results are not evaluated or analyzed via experimentation or refined and tailored to the application environment. Thus, it cannot be easily transferred into practice. Because of these limitations we have not been able to understand the components of the discipline as a coherent whole and the relationships between various models of the process and product. What is needed is a top down experimental, evolutionary framework in which research can be focused, logically and physically integrated to produce quality software productively, and evaluated and tailored to the application environment. This implies the need for experimentation, which in turn implies the need for a laboratory that is associated with the artifact we are studying. This laboratory can only exist in an environment where software is being built, i.e., as part of a real software development and maintenance organization. Thus, we propose that Software Engineering Laboratory (SEL) type activities exist in all organizations to support software engineering research. We describe the SEL from a researcher's point of view, and discuss the corporate and government benefits of the SEL. The discussion focuses on the benefits to the research community.

Gas and Particulate Aircraft Emissions Measurements: Impacts on local air quality.

NASA Astrophysics Data System (ADS)

Jayne, J. T.; Onasch, T.; Northway, M.; Canagaratna, M.; Worsnop, D.; Timko, M.; Wood, E.; Miake-Lye, R.; Herndon, S.; Knighton, B.; Whitefield, P.; Hagen, D.; Lobo, P.; Anderson, B.

2007-12-01

Air travel and freight shipping by air are becoming increasingly important and are expected to continue to expand. The resulting increases in the local concentrations of pollutants, including particulate matter (PM), volatile organic compounds (VOCs), and nitrogen oxides (NOX), can have negative impacts on regional air quality, human health and can impact climate change. In order to construct valid emission inventories, accurate measurements of aircraft emissions are needed. These measurements must be done both at the engine exit plane (certification) and downwind following the rapid cooling, dilution and initial atmospheric processing of the exhaust plume. We present here results from multiple field experiments which include the Experiment to Characterize Volatile Aerosol and Trace Species Emissions (EXCAVATE) and the four Aircraft Particle Emissions eXperiments (APEX- 1/Atlanta/2/3) which characterized gas and particle emissions from both stationary or in-use aircraft. Emission indices (EIs) for NOx and VOCs and for particle number concentration, refractory PM (black carbon soot) and volatile PM (primarily sulfate and organic) particles are reported. Measurements were made at the engine exit plane and at several downstream locations (10 and 30 meters) for a number of different engine types and engine thrust settings. A significant fraction of organic particle mass is composed of low volatility oil-related compounds and is not combustion related, potentially emitted by vents or heated surfaces within aircraft engines. Advected plumes measurements from in-use aircraft show that the practice of reduced thrust take-offs has a significant effect on total NOx and soot emitted in the vicinity of the airport. The measurements reported here represent a first observation of this effect and new insights have been gained with respect to the chemical processing of gases and particulates important to the urban airshed.

The roles of engineering notebooks in shaping elementary engineering student discourse and practice

NASA Astrophysics Data System (ADS)

Hertel, Jonathan D.; Cunningham, Christine M.; Kelly, Gregory J.

2017-06-01

Engineering design challenges offer important opportunities for students to learn science and engineering knowledge and practices. This study examines how students' engineering notebooks across four units of the curriculum Engineering is Elementary (EiE) support student work during design challenges. Through educational ethnography and discourse analysis, transcripts of student talk and action were created and coded around the uses of notebooks in the accomplishment of engineering tasks. Our coding process identified two broad categories of roles of the notebooks: they scaffold student activity and support epistemic practices of engineering. The study showed the importance of prompts to engage students in effective uses of writing, the roles the notebook assumes in the students' small groups, and the ways design challenges motivate children to write and communicate.

Integrating Theory and Practice: Applying the Quality Improvement Paradigm to Product Line Engineering

NASA Technical Reports Server (NTRS)

Stark, Michael; Hennessy, Joseph F. (Technical Monitor)

2002-01-01

My assertion is that not only are product lines a relevant research topic, but that the tools used by empirical software engineering researchers can address observed practical problems. Our experience at NASA has been there are often externally proposed solutions available, but that we have had difficulties applying them in our particular context. We have also focused on return on investment issues when evaluating product lines, and while these are important, one can not attain objective data on success or failure until several applications from a product family have been deployed. The use of the Quality Improvement Paradigm (QIP) can address these issues: (1) Planning an adoption path from an organization's current state to a product line approach; (2) Constructing a development process to fit the organization's adoption path; (3) Evaluation of product line development processes as the project is being developed. The QIP consists of the following six steps: (1) Characterize the project and its environment; (2) Set quantifiable goals for successful project performance; (3) Choose the appropriate process models, supporting methods, and tools for the project; (4) Execute the process, analyze interim results, and provide real-time feedback for corrective action; (5) Analyze the results of completed projects and recommend improvements; and (6) Package the lessons learned as updated and refined process models. A figure shows the QIP in detail. The iterative nature of the QIP supports an incremental development approach to product lines, and the project learning and feedback provide the necessary early evaluations.

Assuring quality in high-consequence engineering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoover, Marcey L.; Kolb, Rachel R.

2014-03-01

In high-consequence engineering organizations, such as Sandia, quality assurance may be heavily dependent on staff competency. Competency-dependent quality assurance models are at risk when the environment changes, as it has with increasing attrition rates, budget and schedule cuts, and competing program priorities. Risks in Sandia's competency-dependent culture can be mitigated through changes to hiring, training, and customer engagement approaches to manage people, partners, and products. Sandia's technical quality engineering organization has been able to mitigate corporate-level risks by driving changes that benefit all departments, and in doing so has assured Sandia's commitment to excellence in high-consequence engineering and national service.

The effectiveness of AMT investment in UK metal component manufacture

NASA Astrophysics Data System (ADS)

Hamblin, David; Nugent, Edward

1991-11-01

The aim of the research was to investigate the effectiveness of capital investment, particularly investment in Advanced Manufacturing Technology (AMT). AMT encompasses not only production, but also design and administration areas. The intention was to make recommendations for the future direction of investment in the industry. The structure of the industry which comprises 54 companies is outlined. In order to obtain sufficiently detailed and accurate data, each company was visited. Discussions were held with managers covering the areas of production, engineering, finance, design, sales and marketing, quality and other strategic issues affecting investment decision making. The study conclusions and recommendations are presented. An overview of the industry and the survey sample are given. Company performance, practice relationships which link practice, and performance are discussed.

Technology to improve quality and accountability.

PubMed

Kay, Jonathan

2006-01-01

A body of evidence has been accumulated to demonstrate that current practice is not sufficiently safe for several stages of central laboratory testing. In particular, while analytical and perianalytical steps that take place within the laboratory are subjected to quality control procedures, this is not the case for several pre- and post-analytical steps. The ubiquitous application of auto-identification technology seems to represent a valuable tool for reducing error rates. A series of projects in Oxford has attempted to improve processes which support several areas of laboratory medicine, including point-of-care testing, blood transfusion, delivery and interpretation of reports, and support of decision-making by clinicians. The key tools are auto-identification, Internet communication technology, process re-engineering, and knowledge management.

Spectral and spatial characterisation of laser-driven positron beams

DOE PAGES

Sarri, G.; Warwick, J.; Schumaker, W.; ...

2016-10-18

The generation of high-quality relativistic positron beams is a central area of research in experimental physics, due to their potential relevance in a wide range of scientific and engineering areas, ranging from fundamental science to practical applications. There is now growing interest in developing hybrid machines that will combine plasma-based acceleration techniques with more conventional radio-frequency accelerators, in order to minimise the size and cost of these machines. Here we report on recent experiments on laser-driven generation of high-quality positron beams using a relatively low energy and potentially table-top laser system. Lastly, the results obtained indicate that current technology allowsmore » to create, in a compact setup, positron beams suitable for injection in radio-frequency accelerators.« less

The European Engineer: A British Civil Engineering Viewpoint.

ERIC Educational Resources Information Center

Fleming, George

1988-01-01

Confronts the problems of defining the European Engineer in terms of educational and practical training. Analyzes the supply and demand requirements of engineering management and practice. Compares these analyses with conditions in the United States. Gives details of the educational process in a number of European countries. (CW)

Investigating Engineering Practice Is Valuable for Mathematics Learning

ERIC Educational Resources Information Center

Goold, Eileen

2015-01-01

While engineering mathematics curricula often prescribe a fixed body of mathematical knowledge, this study takes a different approach; second-year engineering students are additionally required to investigate and document an aspect of mathematics used in engineering practice. A qualitative approach is used to evaluate the impact that students'…

Accessibility, nature and quality of health information on the Internet: a survey on osteoarthritis.

PubMed

Maloney, S; Ilic, D; Green, S

2005-03-01

This study aims to determine the quality and validity of information available on the Internet about osteoarthritis and to investigate the best way of sourcing this information. Keywords relevant to osteoarthritis were searched across 15 search engines representing medical, general and meta-search engines. Search engine efficiency was defined as the percentage of unique and relevant websites from all websites returned by each search engine. The quality of relevant information was appraised using the DISCERN tool and the concordance of the information offered by the website with the available evidence about osteoarthritis determined. A total of 3443 websites were retrieved, of which 344 were identified as unique and providing information relevant to osteoarthritis. The overall quality of website information was poor. There was no significant difference between types of search engine in sourcing relevant information; however, the information retrieved from medical search engines was of a higher quality. Fewer than a third of the websites identified as offering relevant information cited evidence to support their recommendations. Although the overall quality of website information about osteoarthritis was poor, medical search engines may provide consumers with the opportunity to source high-quality health information on the Internet. In the era of evidence-based medicine, one of the main obstacles to the Internet reaching its potential as a medical resource is the failure of websites to incorporate and attribute evidence-based information.

Ten Engineers Reading: Disjunctions between Preference and Practice in Civil Engineering Faculty Responses

ERIC Educational Resources Information Center

Taylor, Summer Smith; Patton, Martha D.

2006-01-01

Previous research has indicated that engineering faculty do not follow best practices when commenting on students' technical writing. However, it is unclear whether the faculty prefer to comment in these ineffective ways, or whether they prefer more effective practices but simply do not enact them. This study adapts a well known study of response…

Training, Quality Assurance Factors, and Tools Investigation: a Work Report and Suggestions on Software Quality Assurance

NASA Technical Reports Server (NTRS)

Lee, Pen-Nan

1991-01-01

Previously, several research tasks have been conducted, some observations were obtained, and several possible suggestions have been contemplated involving software quality assurance engineering at NASA Johnson. These research tasks are briefly described. Also, a brief discussion is given on the role of software quality assurance in software engineering along with some observations and suggestions. A brief discussion on a training program for software quality assurance engineers is provided. A list of assurance factors as well as quality factors are also included. Finally, a process model which can be used for searching and collecting software quality assurance tools is presented.

Environmental Engineering in the Slovak Republic

NASA Astrophysics Data System (ADS)

Stevulova, N.; Balintova, M.; Zelenakova, M.; Estokova, A.; Vilcekova, S.

2017-10-01

The fundamental role of environmental engineering is to protect human population and environment from impacts of human activities and to ensure environmental quality. It relates to achieving the environmental sustainability goals through advanced technologies for pollutants removing from air, water and soil in order to minimize risk in ecosystem and ensuring favourable conditions for life of humans and organisms. Nowadays, a critical analysis of the environment quality and innovative approaches to problem solving in order to achieve sustainability in environmental engineering, are necessary. This article presents an overview of the quality of the environment and progress in environmental engineering in Slovakia and gives information regarding the environmental engineering education at Faculty of Civil Engineering at Technical University in Kosice.

Engineering: Defining and differentiating its unique culture

NASA Astrophysics Data System (ADS)

Pilotte, Mary K.

The world of work for engineering professionals is changing. At a rapid pace, experienced engineers are exiting the workforce due to retirement of the Baby Boomer generation, while at the same time the problems facing engineers are increasingly complex and frequently global in nature. For firms to protect their knowledge assets, they must ensure that acquired understandings are shared among their engineering work groups. Engineering teaching and learning in the workplace (i.e., knowledge sharing), is a social activity that resides in a social context governed by the professional engineering culture. This quantitative study uses Hofstede's Organizational Cultural Values Model (Hofstede, Neuijen, Ohayv, & Sanders, 1990) to examine dimensions of engineering culture in the workplace, producing a central tendency profile of engineering's cultural practices. Further, it explores through hypotheses if demographic differentiators, including birth generation, gender, race, industry sector of employment, and engineering discipline, play roles in forming engineering cultural practices. Results both corroborate aspects of Hofstede's model and assert new understandings relative to factors influencing dimensions of engineering practice. Outcomes are discussed in terms of their potential impact on industrial knowledge sharing and formation of beneficial engineering cultures.

Path integration guided with a quality map for shape reconstruction in the fringe reflection technique

NASA Astrophysics Data System (ADS)

Jing, Xiaoli; Cheng, Haobo; Wen, Yongfu

2018-04-01

A new local integration algorithm called quality map path integration (QMPI) is reported for shape reconstruction in the fringe reflection technique. A quality map is proposed to evaluate the quality of gradient data locally, and functions as a guideline for the integrated path. The presented method can be employed in wavefront estimation from its slopes over the general shaped surface with slope noise equivalent to that in practical measurements. Moreover, QMPI is much better at handling the slope data with local noise, which may be caused by the irregular shapes of the surface under test. The performance of QMPI is discussed by simulations and experiment. It is shown that QMPI not only improves the accuracy of local integration, but can also be easily implemented with no iteration compared to Southwell zonal reconstruction (SZR). From an engineering point-of-view, the proposed method may also provide an efficient and stable approach for different shapes with high-precise demand.

Improving the Practical Education of Chemical and Pharmaceutical Engineering Majors in Chinese Universities

ERIC Educational Resources Information Center

Zhao, Feng-qing; Yu, Yi-feng; Ren, Shao-feng; Liu, Shao-jie; Rong, Xin-yu

2014-01-01

Practical education in chemical engineering has drawn increasing attention in recent years. This paper discusses two approaches to teaching and learning about experiments among upper-level chemical and pharmaceutical engineering majors in China. On the basis of years of experience in teaching chemical and pharmaceutical engineering, we propose the…

Teaching Bioprocess Engineering to Undergraduates: Multidisciplinary Hands-On Training in a One-Week Practical Course

ERIC Educational Resources Information Center

Henkel, Marius; Zwick, Michaela; Beuker, Janina; Willenbacher, Judit; Baumann, Sandra; Oswald, Florian; Neumann, Anke; Siemann-Herzberg, Martin; Syldatk, Christoph; Hausmann, Rudolf

2015-01-01

Bioprocess engineering is a highly interdisciplinary field of study which is strongly benefited by practical courses where students can actively experience the interconnection between biology, engineering, and physical sciences. This work describes a lab course developed for 2nd year undergraduate students of bioprocess engineering and related…

Integration of Engineering Education by High School Teachers to Meet Standards in the Physics Classroom

NASA Astrophysics Data System (ADS)

Kersten, Jennifer Anna

In recent years there has been increasing interest in engineering education at the K-12 level, which has resulted in states adopting engineering standards as a part of their academic science standards. From a national perspective, the basis for research into engineering education at the K-12 level is the belief that it is of benefit to student learning, including to "improve student learning and achievement in science and mathematics; increase awareness of engineering and the work of engineers; boost youth interest in pursuing engineering as a career; and increase the technological literacy of all students" (National Research Council, 2009a, p. 1). The above has led to a need to understand how teachers are currently implementing engineering education in their classrooms. High school physics teachers have a history of implementing engineering design projects in their classrooms, thus providing an appropriate setting to look for evidence of quality engineering education at the high school level. Understanding the characteristics of quality engineering integration can inform curricular and professional development efforts for teachers asked to implement engineering in their classrooms. Thus, the question that guided this study is: How, and to what extent, do physics teachers represent quality engineering in a physics unit focused on engineering? A case study research design was implemented for this project. Three high school physics teachers were participants in this study focused on the integration of engineering education into the physics classroom. The data collected included observations, interviews, and classroom documents that were analyzed using the Framework for Quality K-12 Engineering Education (Moore, Glancy et al., 2013). The results provided information about the areas of the K-12 engineering framework addressed during these engineering design projects, and detailed the quality of these lesson components. The results indicate that all of the design projects contained components of the indicators central to engineering education, although with varied degrees of success. In addition, each design project contained aspects important to the development of students' understanding of engineering and that promote important professional skills used by engineers. The implications of this work are discussed at the teacher, school, professional development, and policy levels.

Systems Engineering, Quality and Testing

NASA Technical Reports Server (NTRS)

Shepherd, Christena C.

2015-01-01

AS9100 has little to say about how to apply a Quality Management System (QMS) to aerospace test programs. There is little in the quality engineering Body of Knowledge that applies to testing, unless it is nondestructive examination or some type of lab or bench testing. If one examines how the systems engineering processes are implemented throughout a test program; and how these processes can be mapped to AS9100, a number of areas for involvement of the quality professional are revealed.

A qualitative, interprofessional analysis of barriers to and facilitators of implementation of the Department of Veterans Affairs' Clostridium difficile prevention bundle using a human factors engineering approach.

PubMed

Yanke, Eric; Moriarty, Helene; Carayon, Pascale; Safdar, Nasia

2018-03-01

Clostridium difficile infection (CDI) is increasingly prevalent, severe, and costly. Adherence to infection prevention practices remains suboptimal. More effective strategies to implement guidelines and evidence are needed. Interprofessional focus groups consisting of physicians, resident physicians, nurses, and health technicians were conducted for a quality improvement project evaluating adherence to the Department of Veterans Affairs' (VA) nationally mandated C difficile prevention bundle. Qualitative analysis with a visual matrix display identified barrier and facilitator themes guided by the Systems Engineering Initiative for Patient Safety model, a human factors engineering approach. Several themes, encompassing both barriers and facilitators to bundle adherence, emerged. Rapid turnaround time of C difficile polymerase chain reaction testing was a facilitator of timely diagnosis. Too few, poorly located, and cluttered sinks were barriers to appropriate hand hygiene. Patient care workload and the time-consuming process of contact isolation precautions were also barriers to adherence. Multiple work system components serve as barriers to and facilitators of adherence to the VA CDI prevention bundle among an interprofessional group of health care workers. Organizational factors appear to significantly influence bundle adherence. Interprofessional perspectives are needed to identify barriers to and facilitators of bundle implementation, which is a necessary first step to address adherence to bundled infection prevention practices. Published by Elsevier Inc.

Of Feedback, Noise, and Clarion Calls: Preserving the Quality of Engineering Education.

ERIC Educational Resources Information Center

David, Edward E., Jr.

Although times seemed ripe for far-reaching initiatives to safeguard the quality of engineering education, current political noise about the issue threatens to drown out the engineering community's message. However, the engineering community's theme should be that economic growth in a modern economy, that industrial policy, is based first and…

Summary of the effects of engine throttle response on airplane formation-flying qualities

NASA Technical Reports Server (NTRS)

Walsh, Kevin R.

1992-01-01

A flight evaluation as conducted to determine the effect of engine throttle response characteristics on precision formation-flying qualities. A variable electronic throttle control system was developed and flight-tested on a TF-104G airplane with a J79-11B engine at the NASA Dryden Flight Research Facility. Ten research flights were flown to evaluate the effects of throttle gain, time delay, and fuel control rate limiting on engine handling qualities during a demanding precision wing formation task. Handling quality effects of lag filters and lead compensation time delays were also evaluated. Data from pilot ratings and comments indicate that throttle control system time delays and rate limits cause significant degradations in handling qualities. Threshold values for satisfactory (level 1) and adequate (level 2) handling qualities of these key variables are presented.

Constructing engineers through practice: Gendered features of learning and identity development

NASA Astrophysics Data System (ADS)

Tonso, Karen L.

How do women and men student engineers develop an engineering identity (a sense of belonging, or not), while practicing "actual" engineering? What are the influences of gender, learning and knowledge, relations of power, and conceptions of equality on cultural identity development? I studied these issues in reform-minded engineering design classes, courses organized around teaching students communications, teamwork, and practical engineering. Engineering-student cultural identity categories revealed a status hierarchy, predicated on meeting "academic" criteria for excellence, and the almost total exclusion of women. While working as an engineering colleague on five student teams (three first-year and two senior) and attending their design classes, I documented how cultural identities were made evident and constructed in students' practical engineering. Design projects promoted linking academic knowledge with real-world situations, sharing responsibilities and trusting colleagues, communicating engineering knowledge to technical and non-technical members of business communities, and addressing gaps in students' knowledge. With a curriculum analysis and survey of students' perceptions of the differences between design and conventional courses, I embedded the design classes in the wider campus and found that: (1) Engineering education conferred prestige, power, and well-paying jobs on students who performed "academic" engineering, while failing to adequately encourage "actual" engineering practices. High-status student engineers were the least likely to perform "actual" engineering in design teams. (2) Engineering education advanced an ideology that encouraged its practitioners to consider men's privilege and women's invisibility normal. By making "acting like men act" the standards to which engineering students must conform, women learned to put up with oppressive treatment. Women's accepting their own mistreatment and hiding their womanhood became a condition of women's belonging. (3) Despite all of the pressures to do otherwise, (some) teams of students (at all levels) carved out small oases where "actual" engineering prevailed and women's participation was robust. Students--not faculty, not progressive pedagogy, not "reformed" courses--disrupted prevailing norms. However, two women engineering students, one on each senior team, performed fabulous "actual" engineering, yet neither of them had a job when they graduated--the only two senior students on my teams without jobs.

Hydraulic modeling development and application in water resources engineering

USGS Publications Warehouse

Simoes, Francisco J.; Yang, Chih Ted; Wang, Lawrence K.

2015-01-01

The use of modeling has become widespread in water resources engineering and science to study rivers, lakes, estuaries, and coastal regions. For example, computer models are commonly used to forecast anthropogenic effects on the environment, and to help provide advanced mitigation measures against catastrophic events such as natural and dam-break floods. Linking hydraulic models to vegetation and habitat models has expanded their use in multidisciplinary applications to the riparian corridor. Implementation of these models in software packages on personal desktop computers has made them accessible to the general engineering community, and their use has been popularized by the need of minimal training due to intuitive graphical user interface front ends. Models are, however, complex and nontrivial, to the extent that even common terminology is sometimes ambiguous and often applied incorrectly. In fact, many efforts are currently under way in order to standardize terminology and offer guidelines for good practice, but none has yet reached unanimous acceptance. This chapter provides a view of the elements involved in modeling surface flows for the application in environmental water resources engineering. It presents the concepts and steps necessary for rational model development and use by starting with the exploration of the ideas involved in defining a model. Tangible form of those ideas is provided by the development of a mathematical and corresponding numerical hydraulic model, which is given with a substantial amount of detail. The issues of model deployment in a practical and productive work environment are also addressed. The chapter ends by presenting a few model applications highlighting the need for good quality control in model validation.

Digital dissemination platform of transportation engineering education materials.

DOT National Transportation Integrated Search

2014-09-01

National agencies have called for more widespread adoption of best practices in engineering education. To facilitate this sharing of practices we will develop a web-based system that will be used by transportation engineering educators to share curri...

An engineering approach to controlling indoor air quality.

PubMed

Woods, J E

1991-11-01

Evidence is accumulating that indicates air quality problems in residential and commercial buildings are nearly always associated with inadequacies in building design and methods of operation. Thus, the very systems depended on to control the indoor environment can become indirect sources of contamination if diligence is not exercised at each stage of a building's life: a) planning and design, b) construction and commissioning, c) operation, and d) demolition or renovation. In this paper, an engineering perspective is presented in which the existing building stock is characterized in terms of its environmental performance. Preliminary data indicate that 20 to 30% of the existing buildings have sufficient problems to manifest as sick-building syndrome or building-related illness, while another 10 to 20% may have undetected problems. Thus, only about 50 to 70% of the existing buildings qualify as healthy buildings. Two methods and three mechanisms of control are described to achieve "acceptable" indoor air quality: source control and exposure control. If sources cannot be removed, some level of occupant exposure will result. To control exposures with acceptable values, the primary sensory receptors of the occupants (i.e., thermal, ocular, auditory, and olfactory) cannot be excessively stimulated. The three exposure control mechanisms are conduction, radiation, and convection. To achieve acceptable occupant responses, it is often practical to integrate the mechanisms of radiation and convection in heating, ventilating, and air conditioning systems that are designed to provide acceptable thermal, acoustic, and air quality conditions within occupied spaces.(ABSTRACT TRUNCATED AT 250 WORDS)

An engineering approach to controlling indoor air quality.

PubMed Central

Woods, J E

1991-01-01

Evidence is accumulating that indicates air quality problems in residential and commercial buildings are nearly always associated with inadequacies in building design and methods of operation. Thus, the very systems depended on to control the indoor environment can become indirect sources of contamination if diligence is not exercised at each stage of a building's life: a) planning and design, b) construction and commissioning, c) operation, and d) demolition or renovation. In this paper, an engineering perspective is presented in which the existing building stock is characterized in terms of its environmental performance. Preliminary data indicate that 20 to 30% of the existing buildings have sufficient problems to manifest as sick-building syndrome or building-related illness, while another 10 to 20% may have undetected problems. Thus, only about 50 to 70% of the existing buildings qualify as healthy buildings. Two methods and three mechanisms of control are described to achieve "acceptable" indoor air quality: source control and exposure control. If sources cannot be removed, some level of occupant exposure will result. To control exposures with acceptable values, the primary sensory receptors of the occupants (i.e., thermal, ocular, auditory, and olfactory) cannot be excessively stimulated. The three exposure control mechanisms are conduction, radiation, and convection. To achieve acceptable occupant responses, it is often practical to integrate the mechanisms of radiation and convection in heating, ventilating, and air conditioning systems that are designed to provide acceptable thermal, acoustic, and air quality conditions within occupied spaces.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:1821369

Xyce parallel electronic simulator design.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thornquist, Heidi K.; Rankin, Eric Lamont; Mei, Ting

2010-09-01

This document is the Xyce Circuit Simulator developer guide. Xyce has been designed from the 'ground up' to be a SPICE-compatible, distributed memory parallel circuit simulator. While it is in many respects a research code, Xyce is intended to be a production simulator. As such, having software quality engineering (SQE) procedures in place to insure a high level of code quality and robustness are essential. Version control, issue tracking customer support, C++ style guildlines and the Xyce release process are all described. The Xyce Parallel Electronic Simulator has been under development at Sandia since 1999. Historically, Xyce has mostly beenmore » funded by ASC, the original focus of Xyce development has primarily been related to circuits for nuclear weapons. However, this has not been the only focus and it is expected that the project will diversify. Like many ASC projects, Xyce is a group development effort, which involves a number of researchers, engineers, scientists, mathmaticians and computer scientists. In addition to diversity of background, it is to be expected on long term projects for there to be a certain amount of staff turnover, as people move on to different projects. As a result, it is very important that the project maintain high software quality standards. The point of this document is to formally document a number of the software quality practices followed by the Xyce team in one place. Also, it is hoped that this document will be a good source of information for new developers.« less

Improving System Engineering Excellence at NASA's Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

Takada, Pamela Wallace; Newton, Steve; Gholston, Sampson; Thomas, Dale (Technical Monitor)

2001-01-01

NASA's Marshall Space Flight Center (MSFC) management feels that sound system engineering practices are essential for successful project management, NASA studies have concluded that recent project failures could be attributed in part to inadequate systems engineering. A recent survey of MSFC project managers and system engineers' resulted in the recognition of a need for training in Systems Engineering Practices, particularly as they relate to MSFC projects. In response to this survey, an internal pilot short-course was developed to reinforce accepted practices for system engineering at MSFC. The desire of the MSFC management is to begin with in-house training and offer additional educational opportunities to reinforce sound system engineering principles to the more than 800 professionals who are involved with system engineering and project management. A Systems Engineering Development Plan (SEDP) has been developed to address the longer-term systems engineering development needs of MSFC. This paper describes the survey conducted and the training course that was developed in response to that survey.

Methodology for Formulating Diesel Surrogate Fuels with Accurate Compositional, Ignition-Quality, and Volatility Characteristics

DOE PAGES

Mueller, Charles J.; Cannella, William J.; Bruno, Thomas J.; ...

2012-05-22

In this study, a novel approach was developed to formulate surrogate fuels having characteristics that are representative of diesel fuels produced from real-world refinery streams. Because diesel fuels typically consist of hundreds of compounds, it is difficult to conclusively determine the effects of fuel composition on combustion properties. Surrogate fuels, being simpler representations of these practical fuels, are of interest because they can provide a better understanding of fundamental fuel-composition and property effects on combustion and emissions-formation processes in internal-combustion engines. In addition, the application of surrogate fuels in numerical simulations with accurate vaporization, mixing, and combustion models could revolutionizemore » future engine designs by enabling computational optimization for evolving real fuels. Dependable computational design would not only improve engine function, it would do so at significant cost savings relative to current optimization strategies that rely on physical testing of hardware prototypes. The approach in this study utilized the state-of-the-art techniques of 13C and 1H nuclear magnetic resonance spectroscopy and the advanced distillation curve to characterize fuel composition and volatility, respectively. The ignition quality was quantified by the derived cetane number. Two well-characterized, ultra-low-sulfur #2 diesel reference fuels produced from refinery streams were used as target fuels: a 2007 emissions certification fuel and a Coordinating Research Council (CRC) Fuels for Advanced Combustion Engines (FACE) diesel fuel. A surrogate was created for each target fuel by blending eight pure compounds. The known carbon bond types within the pure compounds, as well as models for the ignition qualities and volatilities of their mixtures, were used in a multiproperty regression algorithm to determine optimal surrogate formulations. The predicted and measured surrogate-fuel properties were quantitatively compared to the measured target-fuel properties, and good agreement was found.« less

Solid propellant processing factor in rocket motor design

NASA Technical Reports Server (NTRS)

1971-01-01

The ways are described by which propellant processing is affected by choices made in designing rocket engines. Tradeoff studies, design proof or scaleup studies, and special design features are presented that are required to obtain high product quality, and optimum processing costs. Processing is considered to include the operational steps involved with the lining and preparation of the motor case for the grain; the procurement of propellant raw materials; and propellant mixing, casting or extrusion, curing, machining, and finishing. The design criteria, recommended practices, and propellant formulations are included.

Quality assessment and control of finite element solutions

NASA Technical Reports Server (NTRS)

Noor, Ahmed K.; Babuska, Ivo

1987-01-01

Status and some recent developments in the techniques for assessing the reliability of finite element solutions are summarized. Discussion focuses on a number of aspects including: the major types of errors in the finite element solutions; techniques used for a posteriori error estimation and the reliability of these estimators; the feedback and adaptive strategies for improving the finite element solutions; and postprocessing approaches used for improving the accuracy of stresses and other important engineering data. Also, future directions for research needed to make error estimation and adaptive movement practical are identified.

Update - Concept of Operations for Integrated Model-Centric Engineering at JPL

NASA Technical Reports Server (NTRS)

Bayer, Todd J.; Bennett, Matthew; Delp, Christopher L.; Dvorak, Daniel; Jenkins, Steven J.; Mandutianu, Sanda

2011-01-01

The increasingly ambitious requirements levied on JPL's space science missions, and the development pace of such missions, challenge our current engineering practices. All the engineering disciplines face this growth in complexity to some degree, but the challenges are greatest in systems engineering where numerous competing interests must be reconciled and where complex system level interactions must be identified and managed. Undesired system-level interactions are increasingly a major risk factor that cannot be reliably exposed by testing, and natural-language single-viewpoint specifications areinadequate to capture and expose system level interactions and characteristics. Systems engineering practices must improve to meet these challenges, and the most promising approach today is the movement toward a more integrated and model-centric approach to mission conception, design, implementation and operations. This approach elevates engineering models to a principal role in systems engineering, gradually replacing traditional document centric engineering practices.

Stem cell applications and tissue engineering approaches in surgical practice.

PubMed

Khan, Wasim S; Malik, Atif A; Hardingham, Timothy E

2009-04-01

There has been an increasing interest in stem cell applications and tissue engineering approaches in surgical practice to deal with damaged or lost tissue. Although there have been developments in almost all surgical disciplines, the greatest advances are being made in orthopaedics, especially in bone repair. Significant hurdles however remain to be overcome before tissue engineering becomes more routinely used in surgical practice.

Transforming System Engineering through Model-Centric Engineering

DTIC Science & Technology

2015-11-18

best practices and provide computational technologies for real-time training within digital engineering environments  Multidisciplinary System...MBSE well due to continued training and practicing . While MBSE is a part of the MCE it does not encompass the full idea and enabling technologies of... practices against other Industry contractors and it was believed that ABC was trailing the others in the use of MDAO capabilities. They decided that

Which Techno-Mathematical Literacies Are Essential for Future Engineers?

ERIC Educational Resources Information Center

van der Wal, Nathalie J.; Bakker, Arthur; Drijvers, Paul

2017-01-01

Due to increased use of technology, the workplace practices of engineers have changed. So-called techno-mathematical literacies (TmL) are necessary for engineers of the 21st century. Because it is still unknown which TmL engineers actually use in their professional practices, the purpose of this study was to identify these TmL. Fourteen…

[A strategy of constructing the technological system for quality control of Chinese medicine based on process control and management].

PubMed

Cheng, Yi-Yu; Qian, Zhong-Zhi; Zhang, Bo-Li

2017-01-01

The current situation, bottleneck problems and severe challenges in quality control technology of Chinese Medicine (CM) are briefly described. It is presented to change the phenomenon related to the post-test as the main means and contempt for process control in drug regulation, reverse the situation of neglecting the development of process control and management technology for pharmaceutical manufacture and reconstruct the technological system for quality control of CM products. The regulation and technology system based on process control and management for controlling CM quality should be established to solve weighty realistic problems of CM industry from the root causes, including backwardness of quality control technology, weakness of quality risk control measures, poor reputation of product quality and so on. By this way, the obstacles from poor controllability of CM product quality could be broken. Concentrating on those difficult problems and weak links in the technical field of CM quality control, it is proposed to build CMC (Chemistry, Manufacturing and Controls) regulation for CM products with Chinese characteristics and promote the regulation international recognition as soon as possible. The CMC technical framework, which is clinical efficacy-oriented, manufacturing manner-centered and process control-focused, was designed. To address the clinical characteristics of traditional Chinese medicine (TCM) and the production feature of CM manufacture, it is suggested to establish quality control engineering for CM manufacturing by integrating pharmaceutical analysis, TCM chemistry, TCM pharmacology, pharmaceutical engineering, control engineering, management engineering and other disciplines. Further, a theoretical model of quality control engineering for CM manufacturing and the methodology of digital pharmaceutical engineering are proposed. A technology pathway for promoting CM standard and realizing the strategic goal of CM internationalization is elaborated. Copyright© by the Chinese Pharmaceutical Association.

A kinetic modeling of chondrocyte culture for manufacture of tissue-engineered cartilage.

PubMed

Kino-Oka, Masahiro; Maeda, Yoshikatsu; Yamamoto, Takeyuki; Sugawara, Katsura; Taya, Masahito

2005-03-01

For repairing articular cartilage defects, innovative techniques based on tissue engineering have been developed and are now entering into the practical stage of clinical application by means of grafting in vitro cultured products. A variety of natural and artificial materials available for scaffolds, which permit chondrocyte cells to aggregate, have been designed for their ability to promote cell growth and differentiation. From the viewpoint of the manufacturing process for tissue-engineered cartilage, the diverse nature of raw materials (seeding cells) and end products (cultured cartilage) oblige us to design a tailor-made process with less reproducibility, which is an obstacle to establishing a production doctrine based on bioengineering knowledge concerning growth kinetics and modeling as well as designs of bioreactors and culture operations for certification of high product quality. In this article, we review the recent advances in the manufacturing of tissue-engineered cartilage. After outlining the manufacturing processes for tissue-engineered cartilage in the first section, the second and third sections, respectively, describe the three-dimensional culture of chondrocytes with Aterocollagen gel and kinetic model consideration as a tool for evaluating this culture process. In the final section, culture strategy is discussed in terms of the combined processes of monolayer growth (ex vivo chondrocyte cell expansion) and three-dimensional growth (construction of cultured cartilage in the gel).

Report of the DOD-University Forum Working Group on Engineering and Science Education.

DTIC Science & Technology

1983-07-01

high priority to strengthening our national base of scientific and technical personnel. That included im- mediate emphasis on training people in the...4 - DOD Requirements for Civilian Engineering and Scientific Personnel .. 5 - DOD Requirements for Military Engineering and Scientific ...15 - The Problem is Quality ................ o................. ...... 15 - The Quality of Engineering and Scientific Personnel in

Use of Data Quality Index in Student Feedback for Quality Assurance of Engineering Programmes at the Military Technological College, Muscat, Oman

ERIC Educational Resources Information Center

Khan, Wasi Uz Zaman; AlAjmi, Abdullah Ahmed Ali; Al Zubaidy, Sarim

2018-01-01

This case study was undertaken to assess the effectiveness of the modifications into the engineering programmes adopted by the Military Technological College (MTC) to satisfy the needs of Omani armed forces. It discusses the role of Quality Assurance (QA) in engineering education and accreditation process in the context of four engineering…

Promoting Quality in NAVFAC (Naval Facilities Engineering Command) Construction.

DTIC Science & Technology

1986-01-01

experience. Inspector Checklists To assist their field construction engineers, Owens - Corning Fiberglas Corporation, in conjunction with Texas A&M...that developed by Owens - Corning Fiberglas A I Corporation to assist government inspectors to maintain high - quality standards in their construction...105, No. C03 (September 1979), 187-199. Information in a letter to the author from D.R. Eberts, Quality Assurance Engineer, Owens - Corning Fiberglas

Who should pay for biomedical-engineering technology development?

NASA Astrophysics Data System (ADS)

Varnado, Samuel G.

1994-12-01

It is an enigma that the introduction of technology has led to improvements in productivity in practically every area of endeavor except the field of medicine. This paper asserts that properly applied technology, based on a systems engineering approach, can help reduce the cost while maintaining the quality of health care delivery. Achieving this goal will require more cooperation and coordination at the Federal level to insure that a focused systems approach is used in applying and developing technology that will lead to cost reduction. It is further asserted that much of the technology that could help reduce costs resides in the DoD and the DOE and has not historically been of prime interest to the NIH. Several dual use applications are presented that show how defense related technology can benefit the field of medicine.

Social media networking: YouTube and search engine optimization.

PubMed

Jackson, Rem; Schneider, Andrew; Baum, Neil

2011-01-01

This is the third part of a three-part article on social media networking. This installment will focus on YouTube and search engine optimization. This article will explore the application of YouTube to the medical practice and how YouTube can help a practice retain its existing patients and attract new patients to the practice. The article will also describe the importance of search engine optimization and how to make your content appear on the first page of the search engines such as Google, Yahoo, and YouTube.

Health search engine with e-document analysis for reliable search results.

PubMed

Gaudinat, Arnaud; Ruch, Patrick; Joubert, Michel; Uziel, Philippe; Strauss, Anne; Thonnet, Michèle; Baud, Robert; Spahni, Stéphane; Weber, Patrick; Bonal, Juan; Boyer, Celia; Fieschi, Marius; Geissbuhler, Antoine

2006-01-01

After a review of the existing practical solution available to the citizen to retrieve eHealth document, the paper describes an original specialized search engine WRAPIN. WRAPIN uses advanced cross lingual information retrieval technologies to check information quality by synthesizing medical concepts, conclusions and references contained in the health literature, to identify accurate, relevant sources. Thanks to MeSH terminology [1] (Medical Subject Headings from the U.S. National Library of Medicine) and advanced approaches such as conclusion extraction from structured document, reformulation of the query, WRAPIN offers to the user a privileged access to navigate through multilingual documents without language or medical prerequisites. The results of an evaluation conducted on the WRAPIN prototype show that results of the WRAPIN search engine are perceived as informative 65% (59% for a general-purpose search engine), reliable and trustworthy 72% (41% for the other engine) by users. But it leaves room for improvement such as the increase of database coverage, the explanation of the original functionalities and an audience adaptability. Thanks to evaluation outcomes, WRAPIN is now in exploitation on the HON web site (http://www.healthonnet.org), free of charge. Intended to the citizen it is a good alternative to general-purpose search engines when the user looks up trustworthy health and medical information or wants to check automatically a doubtful content of a Web page.

Guidelines for environmental infection control in health-care facilities. Recommendations of CDC and the Healthcare Infection Control Practices Advisory Committee (HICPAC).

PubMed

Sehulster, Lynne; Chinn, Raymond Y W

2003-06-06

The health-care facility environment is rarely implicated in disease transmission, except among patients who are immunocompromised. Nonetheless, inadvertent exposures to environmental pathogens (e.g., Aspergillus spp. and Legionella spp.) or airborne pathogens (e.g., Mycobacterium tuberculosis and varicella-zoster virus) can result in adverse patient outcomes and cause illness among health-care workers. Environmental infection-control strategies and engineering controls can effectively prevent these infections. The incidence of health-care--associated infections and pseudo-outbreaks can be minimized by 1) appropriate use of cleaners and disinfectants; 2) appropriate maintenance of medical equipment (e.g., automated endoscope reprocessors or hydrotherapy equipment); 3) adherence to water-quality standards for hemodialysis, and to ventilation standards for specialized care environments (e.g., airborne infection isolation rooms, protective environments, or operating rooms); and 4) prompt management of water intrusion into the facility. Routine environmental sampling is not usually advised, except for water quality determinations in hemodialysis settings and other situations where sampling is directed by epidemiologic principles, and results can be applied directly to infection-control decisions. This report reviews previous guidelines and strategies for preventing environment-associated infections in health-care facilities and offers recommendations. These include 1) evidence-based recommendations supported by studies; 2) requirements of federal agencies (e.g., Food and Drug Administration, U.S. Environmental Protection Agency, U.S. Department of Labor, Occupational Safety and Health Administration, and U.S. Department of Justice); 3) guidelines and standards from building and equipment professional organizations (e.g., American Institute of Architects, Association for the Advancement of Medical Instrumentation, and American Society of Heating, Refrigeration, and Air-Conditioning Engineers); 4) recommendations derived from scientific theory or rationale; and 5) experienced opinions based upon infection-control and engineering practices. The report also suggests a series of performance measurements as a means to evaluate infection-control efforts.

Analysing the integration of engineering in science lessons with the Engineering-Infused Lesson Rubric

NASA Astrophysics Data System (ADS)

Peterman, Karen; Daugherty, Jenny L.; Custer, Rodney L.; Ross, Julia M.

2017-09-01

Science teachers are being called on to incorporate engineering practices into their classrooms. This study explores whether the Engineering-Infused Lesson Rubric, a new rubric designed to target best practices in engineering education, could be used to evaluate the extent to which engineering is infused into online science lessons. Eighty lessons were selected at random from three online repositories, and coded with the rubric. Overall results documented the strengths of existing lessons, as well as many components that teachers might strengthen. In addition, a subset of characteristics was found to distinguish lessons with the highest level of engineering infusion. Findings are discussed in relation to the potential of the rubric to help teachers use research evidence-informed practice generally, and in relation to the new content demands of the U.S. Next Generation Science Standards, in particular.

Elementary Education Program for Engineering by Dual System of Workshop and Teaching Program with Practical Subject

NASA Astrophysics Data System (ADS)

Hara, Toshitsugu

Elementary education program for engineering by the dual system combined with workshop program and teaching program with practical subject was discussed. The dual system which consists of several workshop programs and fundamental subjects (such as mathematics, English and physics) with practical material has been performed for the freshmen. The elementary workshop program (primary course) has four workshops and the related lectures. Fundamental subjects are taught with the practical or engineering texts. English subjects are taught by specified teachers who have ever worked in engineering field with English. The dual system was supported by such systems as the center for success initiative and the English education center.

33 CFR 385.21 - Quality control.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Quality control. 385.21 Section... Processes § 385.21 Quality control. (a) The Corps of Engineers and the non-Federal sponsor shall prepare a quality control plan, in accordance with applicable Corps of Engineers regulations, for each product that...

33 CFR 385.21 - Quality control.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 3 2013-07-01 2013-07-01 false Quality control. 385.21 Section... Processes § 385.21 Quality control. (a) The Corps of Engineers and the non-Federal sponsor shall prepare a quality control plan, in accordance with applicable Corps of Engineers regulations, for each product that...

33 CFR 385.21 - Quality control.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Quality control. 385.21 Section... Processes § 385.21 Quality control. (a) The Corps of Engineers and the non-Federal sponsor shall prepare a quality control plan, in accordance with applicable Corps of Engineers regulations, for each product that...

Qualities Required from Engineers of the Global Times

NASA Astrophysics Data System (ADS)

Senuma, Takehide

In this paper, the qualities and characteristics required from an engineer who works globally are discussed based on my own experience of a joint research project with a European company. The most important qualities and characteristics are integrity, one‧s own initiative, basic and expert knowledge, creativity, communicative skills and broad world view. Having initiative seems to be especially significant but is a weak point of young engineers in Japan at present. Ways to develop students‧ initiative are discussed in detail from a view point of the engineering education.

Education for Professional Engineering Practice

ERIC Educational Resources Information Center

Bramhall, Mike D.; Short, Chris

2014-01-01

This paper reports on a funded collaborative large-scale curriculum innovation and enhancement project undertaken as part of a UK National Higher Education Science, Technology Engineering and Mathematics (STEM) programme. Its aim was to develop undergraduate curricula to teach appropriate skills for professional engineering practice more…

A Framework of Working Across Disciplines in Early Design and R&D of Large Complex Engineered Systems

NASA Technical Reports Server (NTRS)

McGowan, Anna-Maria Rivas; Papalambros, Panos Y.; Baker, Wayne E.

2015-01-01

This paper examines four primary methods of working across disciplines during R&D and early design of large-scale complex engineered systems such as aerospace systems. A conceptualized framework, called the Combining System Elements framework, is presented to delineate several aspects of cross-discipline and system integration practice. The framework is derived from a theoretical and empirical analysis of current work practices in actual operational settings and is informed by theories from organization science and engineering. The explanatory framework may be used by teams to clarify assumptions and associated work practices, which may reduce ambiguity in understanding diverse approaches to early systems research, development and design. The framework also highlights that very different engineering results may be obtained depending on work practices, even when the goals for the engineered system are the same.

Practical Education Support to Foster Engineers at Manufacturing and Engineering Design Center in Muroran Institute of Technology

NASA Astrophysics Data System (ADS)

Kazama, Toshiharu; Hanajima, Naohiko; Shimizu, Kazumichi; Satoh, Kohki

To foster engineers with creative power, Muroran Institute of Technology established Manufacturing and Engineering Design Center (MEDeC) that concentrates on Monozukuri. MEDeC consists of three project groups : i) Education Support Group provides educational support for practical training classes on and off campus and PDCA (plan-do-check-action) -conscious engineering design education related to Monozukuri ; ii) Fundamental Manufacturing Research Group carries out nurture research into fundamental and innovative technology of machining and manufacturing, and iii) Regional Cooperation Group coordinates the activities in cooperation with bureau, schools and industries in and around Muroran City. MEDeC has a fully integrated collection of machine tools and hand tools for manufacturing, an atelier, a tatara workplace, implements for measurement and related equipment designed for practically teaching state-of-the-practice manufacturing methods.

Using Teaching Portfolios to Revise Curriculum and Explore Instructional Practices of Technology and Engineering Education Teachers

ERIC Educational Resources Information Center

Lomask, Michal; Crismond, David; Hacker, Michael

2018-01-01

This paper reports on the use of teaching portfolios to assist in curriculum revision and the exploration of instructional practices used by middle school technology and engineering education teachers. Two new middle school technology and engineering education units were developed through the Engineering for All (EfA) project. One EfA unit focused…

Sound quality assessment of Diesel combustion noise using in-cylinder pressure components

NASA Astrophysics Data System (ADS)

Payri, F.; Broatch, A.; Margot, X.; Monelletta, L.

2009-01-01

The combustion process in direct injection (DI) Diesel engines is an important source of noise, and it is thus the main reason why end-users could be reluctant to drive vehicles powered with this type of engine. This means that the great potential of Diesel engines for environment preservation—due to their lower consumption and the subsequent reduction of CO2 emissions—may be lost. Moreover, the advanced combustion concepts—e.g. the HCCI (homogeneous charge compression ignition)—developed to comply with forthcoming emissions legislation, while maintaining the efficiency of current engines, are expected to be noisier because they are characterized by a higher amount of premixed combustion. For this reason many efforts have been dedicated by car manufacturers in recent years to reduce the overall level and improve the sound quality of engine noise. Evaluation procedures are required, both for noise levels and sound quality, that may be integrated in the global engine development process in a timely and cost-effective manner. In previous published work, the authors proposed a novel method for the assessment of engine noise level. A similar procedure is applied in this paper to demonstrate the suitability of combustion indicators for the evaluation of engine noise quality. These indicators, which are representative of the peak velocity of fuel burning and the resonance in the combustion chamber, are well correlated with the combustion noise mark obtained from jury testing. Quite good accuracy in the prediction of the engine noise quality has been obtained with the definition of a two-component regression, which also permits the identification of the combustion process features related to the resulting noise quality, so that corrective actions may be proposed.

[Artificial intelligence--the knowledge base applied to nephrology].

PubMed

Sancipriano, G P

2005-01-01

The idea that efficacy efficiency, and quality in medicine could not be reached without sorting the huge knowledge of medical and nursing science is very common. Engineers and computer scientists have developed medical software with great prospects for success, but currently these software applications are not so useful in clinical practice. The medical doctor and the trained nurse live the 'information age' in many daily activities, but the main benefits are not so widespread in working activities. Artificial intelligence and, particularly, export systems charm health staff because of their potential. The first part of this paper summarizes the characteristics of 'weak artificial intelligence' and of expert systems important in clinical practice. The second part discusses medical doctors' requirements and the current nephrologic knowledge bases available for artificial intelligence development.

Product Lifecycle Management and the Quest for Sustainable Space Exploration Solutions

NASA Technical Reports Server (NTRS)

Caruso, Pamela W.; Dumbacher, Daniel L.; Grieves, Michael

2011-01-01

Product Lifecycle Management (PLM) is an outcome of lean thinking to eliminate waste and increase productivity. PLM is inextricably tied to the systems engineering business philosophy, coupled with a methodology by which personnel, processes and practices, and information technology combine to form an architecture platform for product design, development, manufacturing, operations, and decommissioning. In this model, which is being implemented by the Marshall Space Flight Center (MSFC) Engineering Directorate, total lifecycle costs are important variables for critical decision-making. With the ultimate goal to deliver quality products that meet or exceed requirements on time and within budget, PLM is a powerful concept to shape everything from engineering trade studies and testing goals, to integrated vehicle operations and retirement scenarios. This briefing will demonstrate how the MSFC Engineering Directorate is implementing PLM as part of an overall strategy to deliver safe, reliable, and affordable space exploration solutions and how that strategy aligns with the Agency and Center systems engineering policies and processes. Sustainable space exploration solutions demand that all lifecycle phases be optimized, and engineering the next generation space transportation system requires a paradigm shift such that digital tools and knowledge management, which are central elements of PLM, are used consistently to maximum effect. Adopting PLM, which has been used by the aerospace and automotive industry for many years, for spacecraft applications provides a foundation for strong, disciplined systems engineering and accountable return on investment. PLM enables better solutions using fewer resources by making lifecycle considerations in an integrative decision-making process.

CAD for small hydro projects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bishop, N.A. Jr.

1994-04-01

Over the past decade, computer-aided design (CAD) has become a practical and economical design tool. Today, specifying CAD hardware and software is relatively easy once you know what the design requirements are. But finding experienced CAD professionals is often more difficult. Most CAD users have only two or three years of design experience; more experienced design personnel are frequently not CAD literate. However, effective use of CAD can be the key to lowering design costs and improving design quality--a quest familiar to every manager and designer. By emphasizing computer-aided design literacy at all levels of the firm, a Canadian joint-venturemore » company that specializes in engineering small hydroelectric projects has cut costs, become more productive and improved design quality. This article describes how they did it.« less

Quality engineering as a discipline of study.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kolb, Rachel R.; Hoover, Marcey L.

2012-12-01

The current framework for quality scholarship in the United States ranges from the training and education of future quality engineers, managers, and professionals to focused and sustained research initiatives that, through academic institutions and other organizations, aim to improve the knowledge and application of quality across a variety of sectors. Numerous quality journals also provide a forum for professional dissemination of information.

Engineering Student's Ethical Awareness and Behavior: A New Motivational Model.

PubMed

Bairaktarova, Diana; Woodcock, Anna

2017-08-01

Professional communities are experiencing scandals involving unethical and illegal practices daily. Yet it should not take a national major structure failure to highlight the importance of ethical awareness and behavior, or the need for the development and practice of ethical behavior in engineering students. Development of ethical behavior skills in future engineers is a key competency for engineering schools as ethical behavior is a part of the professional identity and practice of engineers. While engineering educators have somewhat established instructional methods to teach engineering ethics, they still rely heavily on teaching ethical awareness, and pay little attention to how well ethical awareness predicts ethical behavior. However the ability to exercise ethical judgement does not mean that students are ethically educated or likely to behave in an ethical manner. This paper argues measuring ethical judgment is insufficient for evaluating the teaching of engineering ethics, because ethical awareness has not been demonstrated to translate into ethical behavior. The focus of this paper is to propose a model that correlates with both, ethical awareness and ethical behavior. This model integrates the theory of planned behavior, person and thing orientation, and spheres of control. Applying this model will allow educators to build confidence and trust in their students' ability to build a professional identity and be prepared for the engineering profession and practice.

Science Teachers' Misconceptions in Science and Engineering Distinctions: Reflections on Modern Research Examples

NASA Astrophysics Data System (ADS)

Antink-Meyer, Allison; Meyer, Daniel Z.

2016-10-01

The aim of this exploratory study was to learn about the misconceptions that may arise for elementary and high school science teachers in their reflections on science and engineering practice. Using readings and videos of real science and engineering work, teachers' reflections were used to uncover the underpinnings of their understandings. This knowledge ultimately provides information about supporting professional development (PD) for science teachers' knowledge of engineering. Six science teachers (two elementary and four high school teachers) participated in the study as part of an online PD experience. Cunningham and Carlsen's (Journal of Science Teacher Education 25:197-210, 2014) relative emphases of science and engineering practices were used to frame the design of PD activities and the analyses of teachers' views. Analyses suggest misconceptions within the eight practices of science and engineering from the US Next Generation Science Standards in four areas. These are that: (1) the nature of the practices in both science and engineering research is determined by the long-term implications of the research regardless of the nature of the immediate work, (2) engineering and science are hierarchical, (3) creativity is inappropriate, and (4) research outcomes cannot be processes. We discuss the nature of these understandings among participants and the implications for engineering education PD for science teachers.

NASA Systems Engineering Handbook

NASA Technical Reports Server (NTRS)

Hirshorn, Steven R.; Voss, Linda D.; Bromley, Linda K.

2017-01-01

The update of this handbook continues the methodology of the previous revision: a top-down compatibility with higher level Agency policy and a bottom-up infusion of guidance from the NASA practitioners in the field. This approach provides the opportunity to obtain best practices from across NASA and bridge the information to the established NASA systems engineering processes and to communicate principles of good practice as well as alternative approaches rather than specify a particular way to accomplish a task. The result embodied in this handbook is a top-level implementation approach on the practice of systems engineering unique to NASA. Material used for updating this handbook has been drawn from many sources, including NPRs, Center systems engineering handbooks and processes, other Agency best practices, and external systems engineering textbooks and guides. This handbook consists of six chapters: (1) an introduction, (2) a systems engineering fundamentals discussion, (3) the NASA program project life cycles, (4) systems engineering processes to get from a concept to a design, (5) systems engineering processes to get from a design to a final product, and (6) crosscutting management processes in systems engineering. The chapters are supplemented by appendices that provide outlines, examples, and further information to illustrate topics in the chapters. The handbook makes extensive use of boxes and figures to define, refine, illustrate, and extend concepts in the chapters.

The ACCEND program: a combined BS and MS program in environmental engineering that includes co-operative work experience.

PubMed

Bishop, P L; Keener, T C; Kukreti, A R; Kowel, S T

2004-01-01

Environmental engineering education has rapidly expanded in recent years and new teaching methods are needed. Many professionals and educators believe that a MS degree in environmental engineering should be the minimum in order to practice the profession, along with practical training. This paper describes an innovative program being offered at the University of Cincinnati that combines an integrated BS in civil engineering and an MS in environmental engineering with extensive practical co-operative education (co-op) experience, all within a five-year period. The program includes distance learning opportunities during the co-op periods. The result is a well-trained graduate who will receive higher pay and more challenging career opportunities, and who will have developed professionalism and maturity beyond that from traditional engineering programs.

Natural Hazards characterisation in industrial practice

NASA Astrophysics Data System (ADS)

Bernardara, Pietro

2017-04-01

The definition of rare hydroclimatic extremes (up to 10-4 annual probability of occurrence) is of the utmost importance for the design of high value industrial infrastructures, such as grids, power plants, offshore platforms. The underestimation as well as the overestimation of the risk may lead to huge costs (ex. mid-life expensive works or overdesign) which may even prevent the project to happen. Nevertheless, the uncertainty associated to the extrapolation towards the rare frequencies are huge and manifold. They are mainly due to the scarcity of observations, the lack of quality on the extreme value records and on the arbitrary choice of the models used for extrapolations. This often put the design engineers in uncomfortable situations when they must choose the design values to use. Providentially, the recent progresses in the earth observation techniques, information technology, historical data collection and weather and ocean modelling are making huge datasets available. A careful use of big datasets of observations and modelled data are leading towards a better understanding of the physics of the underlying phenomena, the complex interactions between them and thus of the extreme events frequency extrapolations. This will move the engineering practice from the single site, small sample, application of statistical analysis to a more spatially coherent, physically driven extrapolation of extreme values. Few examples, from the EDF industrial practice are given to illustrate these progresses and their potential impact on the design approaches.

Understanding dental CAD/CAM for restorations--dental milling machines from a mechanical engineering viewpoint. Part B: labside milling machines.

PubMed

Lebon, Nicolas; Tapie, Laurent; Duret, Francois; Attal, Jean-Pierre

2016-01-01

Nowadays, dental numerical controlled (NC) milling machines are available for dental laboratories (labside solution) and dental production centers. This article provides a mechanical engineering approach to NC milling machines to help dental technicians understand the involvement of technology in digital dentistry practice. The technical and economic criteria are described for four labside and two production center dental NC milling machines available on the market. The technical criteria are focused on the capacities of the embedded technologies of milling machines to mill prosthetic materials and various restoration shapes. The economic criteria are focused on investment cost and interoperability with third-party software. The clinical relevance of the technology is discussed through the accuracy and integrity of the restoration. It can be asserted that dental production center milling machines offer a wider range of materials and types of restoration shapes than labside solutions, while labside solutions offer a wider range than chairside solutions. The accuracy and integrity of restorations may be improved as a function of the embedded technologies provided. However, the more complex the technical solutions available, the more skilled the user must be. Investment cost and interoperability with third-party software increase according to the quality of the embedded technologies implemented. Each private dental practice may decide which fabrication option to use depending on the scope of the practice.

Aristotle and Autism: Reconsidering a Radical Shift to Virtue Ethics in Engineering.

PubMed

Furey, Heidi

2017-04-01

Virtue-based approaches to engineering ethics have recently received considerable attention within the field of engineering education. Proponents of virtue ethics in engineering argue that the approach is practically and pedagogically superior to traditional approaches to engineering ethics, including the study of professional codes of ethics and normative theories of behavior. This paper argues that a virtue-based approach, as interpreted in the current literature, is neither practically or pedagogically effective for a significant subpopulation within engineering: engineers with high functioning autism spectrum disorder (ASD). Because the main argument for adopting a character-based approach is that it could be more successfully applied to engineering than traditional rule-based or algorithmic ethical approaches, this oversight is problematic for the proponents of the virtue-based view. Furthermore, without addressing these concerns, the wide adoption of a virtue-based approach to engineering ethics has the potential to isolate individuals with ASD and to devalue their contributions to moral practice. In the end, this paper gestures towards a way of incorporating important insights from virtue ethics in engineering that would be more inclusive of those with ASD.

Leveling the Playing Field: Teacher Perception of Integrated STEM, Engineering, and Engineering Practices

NASA Astrophysics Data System (ADS)

Fincher, Bridgette Ann

The purpose of this study was to describe the perceptions and approaches of 14 third-through-fifth grade Arkansan elementary teachers towards integrative engineering and engineering practices during 80 hours of integrated STEM professional development training in the summer and fall of 2014. This training was known as Project Flight. The purpose of the professional development was to learn integrated STEM content related to aviation and to write grade level curriculum units using Wiggins and McTighe's Understanding by Design curriculum framework. The current study builds upon on the original research. Using a mixed method exploratory, embedded QUAL[quan] case study design and a non-experimental convenience sample derived from original 20 participants of Project Flight, this research sought to answer the following question: Does professional development influence elementary teachers' perceptions of the curriculum and instruction of integrated STEM engineering and engineering practices in a 3-to-5 grade level setting? A series of six qualitative and one quantitative sub-questions informed the research of the mixed method question. Hermeneutic content analysis was applied to archival and current qualitative data sets while descriptive statistics, independent t-tests, and repeated measures ANOVA tests were performed on the quantitative data. Broad themes in the teachers' perceptions and understanding of the nature of integrated engineering and engineering practices emerged through triangulation. After the professional development and the teaching of the integrated STEM units, all 14 teachers sustained higher perceptions of personal self-efficacy in their understanding of Next Generation Science Standards (NGSS). The teachers gained understanding of engineering and engineering practices, excluding engineering habits of mind, throughout the professional development training and unit teaching. The research resulted in four major findings specific to elementary engineering, which included engineering as student social agency and empowerment and the emergence of the engineering design loop as a new heuristic, and three more general non-engineering specific findings. All seven, however, have implications for future elementary engineering professional development as teachers in adopting states start to transition into using the NGSS standards.

Do Over or Make Do? Climate Models as a Software Development Challenge (Invited)

NASA Astrophysics Data System (ADS)

Easterbrook, S. M.

2010-12-01

We present the results of a comparative study of the software engineering culture and practices at four different earth system modeling centers: the UK Met Office Hadley Centre, the National Center for Atmospheric Research (NCAR), The Max-Planck-Institut für Meteorologie (MPI-M), and the Institut Pierre Simon Laplace (IPSL). The study investigated the software tools and techniques used at each center to assess their effectiveness. We also investigated how differences in the organizational structures, collaborative relationships, and technical infrastructures constrain the software development and affect software quality. Specific questions for the study included 1) Verification and Validation - What techniques are used to ensure that the code matches the scientists’ understanding of what it should do? How effective are these are at eliminating errors of correctness and errors of understanding? 2) Coordination - How are the contributions from across the modeling community coordinated? For coupled models, how are the differences in the priorities of different, overlapping communities of users addressed? 3) Division of responsibility - How are the responsibilities for coding, verification, and coordination distributed between different roles (scientific, engineering, support) in the organization? 4) Planning and release processes - How do modelers decide on priorities for model development, how do they decide which changes to tackle in a particular release of the model? 5) Debugging - How do scientists debug the models, what types of bugs do they find in their code, and how they find them? The results show that each center has evolved a set of model development practices that are tailored to their needs and organizational constraints. These practices emphasize scientific validity, but tend to neglect other software qualities, and all the centers struggle frequently with software problems. The testing processes are effective at removing software errors prior to release, but the code is hard to understand and hard to change. Software errors and model configuration problems are common during model development, and appear to have a serious impact on scientific productivity. These problems have grown dramatically in recent years with the growth in size and complexity of earth system models. Much of the success in obtaining valid simulations from the models depends on the scientists developing their own code, experimenting with alternatives, running frequent full system tests, and exploring patterns in the results. Blind application of generic software engineering processes is unlikely to work well. Instead, each center needs to lean how to balance the need for better coordination through a more disciplined approach with the freedom to explore, and the value of having scientists work directly with the code. This suggests that each center can learn a lot from comparing their practices with others, but that each might need to develop a different set of best practices.

40 CFR 52.2465 - Original identification of plan section.

Code of Federal Regulations, 2011 CFR

2011-07-01

... engineering practice (GEP) stack height,” “hazardous air pollutant,” “nearby,” “stationary source” and... good engineering practice (GEP) stack height requirements submitted on May 12, 1986 by the Virginia... Executive Director, Virginia State Air Pollution Control Board, transmitting the revised good engineering...

Investigating Knowledge Creation Technology in an Engineering Course

ERIC Educational Resources Information Center

Jalonen, Satu; Lakkala, Minna; Paavola, Sami

2011-01-01

The aim of the present study was to examine the technological affordances of a web-based collaborative learning technology, Knowledge Practices Environment (KPE), for supporting different dimensions of knowledge creation processes. KPE was used by engineering students in a practically oriented undergraduate engineering course. The study…

29 CFR 1910.1018 - Inorganic arsenic.

Code of Federal Regulations, 2012 CFR

2012-07-01

... possible time but not later than December 31, 1979, engineering and work practice controls to reduce... that such controls are not feasible. (ii) Where engineering and work practice controls are not... program to reduce exposures to or below the permissible exposure limit by means of engineering and work...

Technologies of polytechnic education in global benchmark higher education institutions

NASA Astrophysics Data System (ADS)

Kurushina, V. A.; Kurushina, E. V.; Zemenkova, M. Y.

2018-05-01

The Russian polytechnic education is going through the sequence of transformations started with introduction of bachelor and master degrees in the higher education instead of the previous “specialists”. The next stage of reformation in the Russian polytechnic education should imply the growth in quality of teaching and learning experience that is possible to achieve by accumulating the best education practices of the world-class universities using the benchmarking method. This paper gives an overview of some major distinctive features of the foreign benchmark higher education institution and the Russian university of polytechnic profile. The parameters that allowed the authors to select the foreign institution for comparison include the scope of educational profile, industrial specialization, connections with the leading regional corporations, size of the city and number of students. When considering the possibilities of using relevant higher education practices of the world level, the authors emphasize the importance of formation of a new mentality of an engineer, the role of computer technologies in engineering education, the provision of licensed software for the educational process which exceeds the level of a regional Russian university, and successful staff technologies (e.g., inviting “guest” lecturers or having 2-3 lecturers per course).

Review and Prospect of BIM Policy in China

NASA Astrophysics Data System (ADS)

Liu, Bingsheng; Wang, Min; Zhang, Yutao; Liu, Rui; Wang, Anmin

2017-10-01

In the process of architectural design, construction, operation and maintenance, the problem of inefficiency and inaccuracy in information application and exchange has caused substantial waste of resources and risk in construction industry. Building Information Management provides an opportunity to address the issue. Building information modelling (BIM) has been increasingly applied in design, construction and other information management in China as its important role in reducing engineering changes, improving engineering quality, shortening project duration, saving project cost, enhancing information sharing among the participants many others. As an integration of process and product, its development and implementation need government regulation to enhance its applications effect and standardize its adoption and implementation. Especially, the government guidance affects the application and development of new technology to a great extent in China. However, relevant policy development falls behind the rapid development of its application in practice in China, which has led to many problems in construction practice. In order to develop effective BIM policy for China, this paper conducted a comprehensive review about existing BIM policy in China by analysing its status and problems, comparing it with the corresponding policy in developed countries such as the USA and UK. The expected policy development direction is also discussed and proposed.

How the Kano model contributes to Kansei engineering in services.

PubMed

Hartono, Markus; Chuan, Tan Kay

2011-11-01

Recent studies show that products and services hold great appeal if they are attractively designed to elicit emotional feelings from customers. Kansei engineering (KE) has good potential to provide a competitive advantage to those able to read and translate customer affect and emotion in actual product and services. This study introduces an integrative framework of the Kano model and KE, applied to services. The Kano model was used and inserted into KE to exhibit the relationship between service attribute performance and customer emotional response. Essentially, the Kano model categorises service attribute quality into three major groups (must-be [M], one-dimensional [O] and attractive [A]). The findings of a case study that involved 100 tourists who stayed in luxury 4- and 5-star hotels are presented. As a practical matter, this research provides insight on which service attributes deserve more attention with regard to their significant impact on customer emotional needs. STATEMENT OF RELEVANCE: Apart from cognitive evaluation, emotions and hedonism play a big role in service encounters. Through a focus on delighting qualities of service attributes, this research enables service providers and managers to establish the extent to which they prioritise their improvement efforts and to always satisfy their customer emotions beyond expectation.

Model based estimation of sediment erosion in groyne fields along the River Elbe

NASA Astrophysics Data System (ADS)

Prohaska, Sandra; Jancke, Thomas; Westrich, Bernhard

2008-11-01

River water quality is still a vital environmental issue, even though ongoing emissions of contaminants are being reduced in several European rivers. The mobility of historically contaminated deposits is key issue in sediment management strategy and remediation planning. Resuspension of contaminated sediments impacts the water quality and thus, it is important for river engineering and ecological rehabilitation. The erodibility of the sediments and associated contaminants is difficult to predict due to complex time depended physical, chemical, and biological processes, as well as due to the lack of information. Therefore, in engineering practice the values for erosion parameters are usually assumed to be constant despite their high spatial and temporal variability, which leads to a large uncertainty of the erosion parameters. The goal of presented study is to compare the deterministic approach assuming constant critical erosion shear stress and an innovative approach which takes the critical erosion shear stress as a random variable. Furthermore, quantification of the effective value of the critical erosion shear stress, its applicability in numerical models, and erosion probability will be estimated. The results presented here are based on field measurements and numerical modelling of the River Elbe groyne fields.

The science, information, and engineering needed to manage water availability and quality in 2050: Chapter 23

USGS Publications Warehouse

Hirsch, Robert M.

2012-01-01

This chapter explores four water resources issues: 1) hydrologic variability, hazards, water supply and ecosystem preservation; 2) urban landscape design; 3) non-point source water quality, and 4) climate change, resiliency, and nonstationarity. It also considers what science, technology, and engineering practice may be needed in the coming decades to sustain water supplies and ecosystems in the face of increasing stresses from a growing demand for water. Dealing with these four water resource issues in the highly uncertain future would will demand predictive models that are rooted in real-world data. In a non-stationary world, continuity of observations is crucial. All watersheds are influenced by human actions through changes in land use, water use, and climate. The focus of water planning and management between today and 2050 will depend more than ever on collection and analysis of long-term data to learn about the evolving state of the system, understanding ecosystem processes in the water and on the landscape, and finding innovative ways to manage water as a shared resource. This includes sharing water with our neighbors on the landscape, sharing with the other species that depend on water, and sharing with future generations.

Parametric Optimization Of Gas Metal Arc Welding Process By Using Grey Based Taguchi Method On Aisi 409 Ferritic Stainless Steel

NASA Astrophysics Data System (ADS)

Ghosh, Nabendu; Kumar, Pradip; Nandi, Goutam

2016-10-01

Welding input process parameters play a very significant role in determining the quality of the welded joint. Only by properly controlling every element of the process can product quality be controlled. For better quality of MIG welding of Ferritic stainless steel AISI 409, precise control of process parameters, parametric optimization of the process parameters, prediction and control of the desired responses (quality indices) etc., continued and elaborate experiments, analysis and modeling are needed. A data of knowledge - base may thus be generated which may be utilized by the practicing engineers and technicians to produce good quality weld more precisely, reliably and predictively. In the present work, X-ray radiographic test has been conducted in order to detect surface and sub-surface defects of weld specimens made of Ferritic stainless steel. The quality of the weld has been evaluated in terms of yield strength, ultimate tensile strength and percentage of elongation of the welded specimens. The observed data have been interpreted, discussed and analyzed by considering ultimate tensile strength ,yield strength and percentage elongation combined with use of Grey-Taguchi methodology.

Physician Dual Practice: A Descriptive Mapping Review of Literature.

PubMed

Moghri, Javad; Arab, Mohammad; Rashidian, Arash; Akbari Sari, Ali

2016-03-01

Physician dual practice is a common phenomenon in almost all countries throughout the world, which could potential impacts on access, equity and quality of services. This paper aims to review studies in physician dual practice and categorize them in order to their main objectives and purposes. Comprehensive literature searches were undertaken in order to obtain main papers and documents in the field of physician dual practice. Systematic searches in Medline and Embase from 1960 to 2013, and general searches in some popular search engines were carried out in this way. After that, descriptive mapping review methods were utilized to categorize eligible studies in this area. The searches obtained 404 titles, of which 81 full texts were assessed. Finally, 24 studies were eligible for inclusion in our review. These studies were categorized into four groups - "motivation and forces behind dual practice", "consequences of dual practice", "dual practice Policies and their impacts", and "other studies" - based on their main objectives. Our findings showed a dearth of scientifically reliable literature in some areas of dual practice, like the prevalence of the phenomenon, the real consequences of it, and the impacts of the implemented policy measures. Rigorous empirical and evaluative studies should be designed to detect the real consequences of DP and assess the effects of interventions and regulations, which governments have implemented in this field.

[Clinical practice guidelines (II): searching and critical evaluation].

PubMed

Alonso, P; Bonfill, X

2007-01-01

Clinical practice guidelines have unique characteristics of the Internet era in which they are starting to be increasingly popular. The fact that they are often elaborated by governmental agencies and are not published in conventional journals means that they may not be accessible using the usual search methods employed for other types of scientific studies and documents (clinical trials, reviews, etc.). The Internet has become an essential tool for locating clinical practice guidelines, and meta-search engines, specific databases, directories, and elaborating institutions are of special importance. The relative lack of indexing of clinical practice guides means that Medline and Embase are not as useful in this context as in searching for original studies. With the aim of evaluating the validity, reproducibility, and reliability of clinical practice guidelines, a series of European institutions designed a tool to evaluate clinical practice guidelines at the end of the 1990s. This instrument, named AGREE, aims to offer a framework for the evaluation of the quality of clinical practice guidelines. It can also be useful in the design of new clinical practice guidelines as well as in the evaluation of the validity of guidelines to be updated or adapted. The AGREE instrument has become the reference for those that use guidelines, those that elaborate them, and for healthcare providers.

Design Practices of Preservice Elementary Teachers in an Integrated Engineering and Literature Experience

ERIC Educational Resources Information Center

Wendell, Kristen Bethke

2014-01-01

The incorporation of engineering practices and core ideas into the "Next Generation Science Standards" at the elementary school level provides exciting opportunities but also raises important questions about the preparation of new elementary teachers. Both the teacher education and engineering education communities have a limited…

Extending Engineering Practice Research with Shared Qualitative Data

ERIC Educational Resources Information Center

Trevelyan, James

2016-01-01

Research on engineering practice is scarce and sharing of qualitative research data can reduce the effort required for an aspiring researcher to obtain enough data from engineering workplaces to draw generalizable conclusions, both qualitative and quantitative. This paper describes how a large shareable qualitative data set on engineering…

Engineering Communication Interface: An Engineering Multi-Disciplinary Project

ERIC Educational Resources Information Center

Prescott, David; El-Sakran, Tharwat; Albasha, Lutfi; Aloul, Fadi; Al-Assaf, Yousef

2011-01-01

Well-developed professional communication skills, collaborative work practices, effective self-management and a clear understanding of social responsibility and ethical practices are essential for the new engineer who hopes to contribute to the profession and build a career. These attributes are in addition to the traditional sound knowledge of…

Teaching professional development of science and engineering professors at a research-extensive university: Motivations, meaningfulness, obstacles, and effects

NASA Astrophysics Data System (ADS)

Bouwma-Gearhart, Jana

There is a national movement to improve undergraduate science, technology, engineering, and mathematics (STEM) education. Given the percentage of academics teaching and training at research institutions, there is a parallel movement to improve the quality of teaching-focused professional development for practicing and future STEM educators at these institutions. While research into the effectiveness of teaching professional development at the postsecondary level has increased over the last 40 years, little attention has been paid to understanding faculty perceptions regarding what constitutes effective teaching professional development. Less is known about how to best meet the needs of STEM faculty at research universities and why, given that they are seldom required to engage in teaching professional development, they bother to participate at all. The higher education research community must develop theory grounded in the knowledge and practical experiences of the faculty engaged in teaching professional development. I have studied what motivates twelve research university science and engineering faculty to engage in teaching professional development in light of local supports and barriers and the resulting value of their participation. I have interpreted the experiences of my research participants to indicate that they were motivated to engage in teaching professional development to fulfill a need to bring their teaching competencies in better concordance with their professional strengths as researchers. Once engaged, my research participants increased their teaching competence and achieved more autonomy with respect to their professional practice. As they continued to engage, they internalized the values and practices associated with effective teaching professional development and adopted the commitment to continually problematize their teaching practice as more of their own. My research participants attempted to transfer their revised stance regarding teaching and teaching professional development to their student mentees and colleagues. They found certain teaching professional development types and topics to be more meaningful and of interest than others. My research findings may inform those committed to the improvement of postsecondary STEM education at research universities, including teaching professional development advocates and implementers and participating faculty members themselves.

The pond is wider than you think! Problems encountered when searching family practice literature.

PubMed Central

Rosser, W. W.; Starkey, C.; Shaughnessy, R.

2000-01-01

OBJECTIVE: To explain differences in the results of literature searches in British general practice and North American family practice or family medicine. DESIGN: Comparative literature search. SETTING: The Department of Family and Community Medicine at the University of Toronto in Ontario. METHOD: Literature searches on MEDLINE demonstrated that certain search strategies ignored certain key words, depending on the search engine and the search terms chosen. Literature searches using the key words "general practice," "family practice," and "family medicine" combined with the topics "depression" and then "otitis media" were conducted in MEDLINE using four different Web-based search engines: Ovid, HealthGate, PubMed, and Internet Grateful Med. MAIN OUTCOME MEASURES: The number of MEDLINE references retrieved for both topics when searched with each of the three key words, "general practice," "family practice," and "family medicine" using each of the four search engines. RESULTS: For each topic, each search yielded very different articles. Some search engines did a better job of matching the term "general practice" to the terms "family medicine" and "family practice," and thus improved retrieval. The problem of language use extends to the variable use of terminology and differences in spelling between British and American English. CONCLUSION: We need to heighten awareness of literature search problems and the potential for duplication of research effort when some of the literature is ignored, and to suggest ways to overcome the deficiencies of the various search engines. Images Figure 1 Figure 2 PMID:10660792

BEST Engineered Hyporheic Zones: Enhanced Hyporheic Exchange and Resazurin and Nitrate Cycling in Constructed Stream Experiments

NASA Astrophysics Data System (ADS)

Herzog, S.; McCray, J. E.; Higgins, C. P.

2016-12-01

The hyporheic zone is a hotspot for biogeochemical processing that can attenuate a variety of nonpoint source contaminants in streamwater. However, hyporheic zones in urban and agricultural streams are often degraded and poorly connected with surface water. To increase hyporheic exchange and improve water quality, we introduced engineered streambeds as a stormwater and restoration best management practice. Modifications to streambed hydraulic conductivity and reactivity are termed Biohydrochemical Enhancements for Streamwater Treatment (BEST). BEST are subsurface modules that utilize low-permeability sediments to drive efficient hyporheic exchange, and reactive geomedia to increase reaction rates within the hyporheic zone. This research utilized two artificial stream flumes at the Colorado School of Mines in Golden, CO. Each lined stream flume was 15m long, 0.3m wide, had 0.3m sediment depth, and was continuously dosed with recycled water at 0.25 L/s. One flume served as an all-sand control condition, the other featured BEST modules at 1m spacing with a mixture of 70/30 sand/woodchips (v/v). NaCl breakthrough curves were monitored and analyzed using STAMMT-L, a mobile-immobile exchange model, which showed greater hyporheic exchange and residence times in the BEST stream relative to the control. This result is even more apparent when the calibrated models are used to simulate longer stream reaches. Water quality samples at the reach scale also revealed greater attenuation of nitrate and transformation of the indicator compound resazurin into resorufin. Together these compounds demonstrate that BEST can attenuate contaminants that degrade under anaerobic and aerobic conditions, respectively. These experimental results were also compared to previous numerical simulations to evaluate model accuracy, and show reasonable agreement. Altogether, these results show that BEST may be an effective novel best management practice for improving streamwater quality in urban and agricultural settings.

Quality Dimensions of Internet Search Engines.

ERIC Educational Resources Information Center

Xie, M.; Wang, H.; Goh, T. N.

1998-01-01

Reviews commonly used search engines (AltaVista, Excite, infoseek, Lycos, HotBot, WebCrawler), focusing on existing comparative studies; considers quality dimensions from the customer's point of view based on a SERVQUAL framework; and groups these quality expectations in five dimensions: tangibles, reliability, responsiveness, assurance, and…

A systematic review of recent clinical practice guidelines and best practice statements for the evaluation of the infertile male.

PubMed

Esteves, Sandro C; Chan, Peter

2015-09-01

We systematically identified and reviewed the methods and consistency of recommendations of recently developed clinical practice guidelines (CPG) and best practice statements (BPS) on the evaluation of the infertile male. MEDLINE and related engines as well as guidelines' Web sites were searched for CPG and BPS written in English on the general evaluation of male infertility published between January 2008 and April 2015. Four guidelines were identified, all of which reported to have been recently updated. Systematic review was not consistently used in the BPS despite being reported in the CPG. Only one of them reported having a patient representative in its development team. The CPG issued by the European Association of Urology (EAU) graded some recommendations and related that to levels (but not quality) of evidence. Overall, the BPS issued respectively by the American Urological Association and American Society for Reproductive Medicine concurred with each other, but both differed from the EAU guidelines with regard to methods of collection, extraction and interpretation of data. None of the guidelines incorporated health economics. Important specific limitations of conventional semen analysis results were ignored by all guidelines. Besides variation in the methodological quality, implementation strategies were not reported in two out of four guidelines. While the various panels of experts who contributed to the development of the CPG and BPS reviewed should be commended on their tremendous efforts aiming to establish a clinical standard in both the evaluation and management of male infertility, we recognized inconsistencies in the methodology of their synthesis and in the contents of their final recommendations. These discrepancies pose a barrier in the general implementation of these guidelines and may limit their utility in standardizing clinical practice or improving health-related outcomes. Continuous efforts are needed to generate high-quality evidence to allow further development of these important guidelines for the evaluation and management of males suffering from infertility.

Engineering good: how engineering metaphors help us to understand the moral life and change society.

PubMed

Coeckelbergh, Mark

2010-06-01

Engineering can learn from ethics, but ethics can also learn from engineering. In this paper, I discuss what engineering metaphors can teach us about practical philosophy. Using metaphors such as calculation, performance, and open source, I articulate two opposing views of morality and politics: one that relies on images related to engineering as science and one that draws on images of engineering practice. I argue that the latter view and its metaphors provide a more adequate way to understand and guide the moral life. Responding to two problems of alienation and taking into account developments such as Fab Lab I then further explore the implications of this view for engineering and society.

Factors associated with sleep quality among operating engineers.

PubMed

Choi, Seung Hee; Terrell, Jeffrey E; Pohl, Joanne M; Redman, Richard W; Duffy, Sonia A

2013-06-01

Blue collar workers generally report high job stress and are exposed to loud noises at work and engage in many of risky health behavioral factors, all of which have been associated with poor sleep quality. However, sleep quality of blue collar workers has not been studied extensively, and no studies have focused Operating Engineers (heavy equipment operators) among whom daytime fatigue would place them at high risk for accidents. Therefore, the purpose of this study was to determine variables associated with sleep quality among Operating Engineers. This was a cross-sectional survey design with a dependent variable of sleep quality and independent variables of personal and related health behavioral factors. A convenience sample of 498 Operating Engineers was recruited from approximately 16,000 Operating Engineers from entire State of Michigan in 2008. Linear regression was used to determine personal and related health behavior factors associated with sleep quality. Multivariate analyses showed that personal factors related to poor sleep quality were younger age, female sex, higher pain, more medical comorbidities and depressive symptoms and behavioral factors related to poor sleep quality were nicotine dependence. While sleep scores were similar to population norms, approximately 34 % (n = 143) showed interest in health services for sleep problems. While many personal factors are not changeable, interventions to improve sleep hygiene as well as interventions to treat pain, depression and smoking may improve sleep quality resulting in less absenteeism, fatal work accidents, use of sick leave, work disability, medical comorbidities, as well as subsequent mortality.

Factors Associated With Sleep Quality Among Operating Engineers

PubMed Central

Choi, Seung Hee; Terrell, Jeffrey E.; Pohl, Joanne M.; Redman, Richard W.

2016-01-01

Blue collar workers generally report high job stress and are exposed to loud noises at work and engage in many of the health behavioral factors, all of which have been associated with poor sleep quality. However, sleep quality of blue collar workers has not been studied extensively, and no studies have focused Operating Engineers (heavy equipment operators) among whom daytime fatigue would place them at high risk for accidents. Therefore, the purpose of this study was to determine variables associated with sleep quality among Operating Engineers. This was a cross-sectional survey design with a dependent variable of sleep quality and independent variables of personal and related health behavioral factors. A convenience sample of 498 Operating Engineers was recruited from approximately 16,000 Operating Engineers from entire State of Michigan in 2008. Linear regression was used to determine personal and related health behavior factors associated with sleep quality. Multivariate analyses showed that personal factors related to poor sleep quality were younger age, female sex, higher pain, more medical comorbidities and depressive symptoms and behavioral factors related to poor sleep quality were nicotine dependence. While sleep scores were similar to population norms, approximately 34% (n=143) showed interest in health services for sleep problems. While many personal factors are not changeable, interventions to improve sleep hygiene as well as interventions to treat pain, depression and smoking may improve sleep quality resulting in less absenteeism, fatal work accidents, use of sick leave, work disability, medical comorbidities, as well as subsequent mortality. PMID:23393021

Virtual reality as a new trend in mechanical and electrical engineering education

NASA Astrophysics Data System (ADS)

Kamińska, Dorota; Sapiński, Tomasz; Aitken, Nicola; Rocca, Andreas Della; Barańska, Maja; Wietsma, Remco

2017-12-01

In their daily practice, academics frequently face lack of access to modern equipment and devices, which are currently in use on the market. Moreover, many students have problems with understanding issues connected to mechanical and electrical engineering due to the complexity, necessity of abstract thinking and the fact that those concepts are not fully tangible. Many studies indicate that virtual reality can be successfully used as a training tool in various domains, such as development, health-care, the military or school education. In this paper, an interactive training strategy for mechanical and electrical engineering education shall be proposed. The prototype of the software consists of a simple interface, meaning it is easy for comprehension and use. Additionally, the main part of the prototype allows the user to virtually manipulate a 3D object that should be analyzed and studied. Initial studies indicate that the use of virtual reality can contribute to improving the quality and efficiency of higher education, as well as qualifications, competencies and the skills of graduates, and increase their competitiveness in the labour market.

Scientific and educational center "space systems and technology"

NASA Astrophysics Data System (ADS)

Kovalev, I. V.; Loginov, Y. Y.; Zelenkov, P. V.

2015-10-01

The issues of engineers training in the aerospace university on the base of Scientific and Educational Center "Space Systems and Technology" are discussed. In order to improve the quality of education in the Siberian State Aerospace University the research work of students, as well as the practice- oriented training of engineers are introduced in the educational process. It was made possible as a result of joint efforts of university with research institutes of the Russian Academy of Science and industrial enterprises. The university experience in this area promotes the development of a new methods and forms of educational activities, including the project-oriented learning technologies, identifying promising areas of specialization and training of highly skilled engineers for aerospace industry and other institutions. It also allows you to coordinate the work of departments and other units of the university to provide the educational process in workshops and departments of the industrial enterprises in accordance with the needs of the target training. Within the framework of scientific and education center the students perform researches, diploma works and master's theses; the postgraduates are trained in advanced scientific and technical areas of enterprise development.

Highly Integrated Quality Assurance – An Empirical Case

DOE Office of Scientific and Technical Information (OSTI.GOV)

Drake Kirkham; Amy Powell; Lucas Rich

2011-02-01

Highly Integrated Quality Assurance – An Empirical Case Drake Kirkham1, Amy Powell2, Lucas Rich3 1Quality Manager, Radioisotope Power Systems (RPS) Program, Idaho National Laboratory, P.O. Box 1625 M/S 6122, Idaho Falls, ID 83415-6122 2Quality Engineer, RPS Program, Idaho National Laboratory 3Quality Engineer, RPS Program, Idaho National Laboratory Contact: Voice: (208) 533-7550 Email: Drake.Kirkham@inl.gov Abstract. The Radioisotope Power Systems Program of the Idaho National Laboratory makes an empirical case for a highly integrated Quality Assurance function pertaining to the preparation, assembly, testing, storage and transportation of 238Pu fueled radioisotope thermoelectric generators. Case data represents multiple campaigns including the Pluto/New Horizons mission,more » the Mars Science Laboratory mission in progress, and other related projects. Traditional Quality Assurance models would attempt to reduce cost by minimizing the role of dedicated Quality Assurance personnel in favor of either functional tasking or peer-based implementations. Highly integrated Quality Assurance adds value by placing trained quality inspectors on the production floor side-by-side with nuclear facility operators to enhance team dynamics, reduce inspection wait time, and provide for immediate, independent feedback. Value is also added by maintaining dedicated Quality Engineers to provide for rapid identification and resolution of corrective action, enhanced and expedited supply chain interfaces, improved bonded storage capabilities, and technical resources for requirements management including data package development and Certificates of Inspection. A broad examination of cost-benefit indicates highly integrated Quality Assurance can reduce cost through the mitigation of risk and reducing administrative burden thereby allowing engineers to be engineers, nuclear operators to be nuclear operators, and the cross-functional team to operate more efficiently. Applicability of this case extends to any high-value, long-term project where traceability and accountability are determining factors.« less

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 34: Users and uses of DOD technical reports: A report from the field

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

1993-01-01

The NASA/DoD Aerospace Knowledge Diffusion Research Project attempts to understand the information environment in which U.S. aerospace engineers and scientists work, the information-seeking behavior of U.S. aerospace engineers and scientists, and the factors that influence the use of scientific and technical information (STI) (Pinelli, Barclay, and Kennedy, 1991). Such an understanding could (1) lead to the development of practical theory, (2) contribute to the design and development of aerospace information systems, and (3) have practical implications for transferring the results of federally funded aerospace research and development (R&D) to the U.S. aerospace community. This paper presents data from two information-seeking behavior studies involving U.S. aerospace engineers and scientists that were undertaken as Phase 1 activities of the NASA/DoD Aerospace Knowledge Diffusion Research Project. Responses from three groups of respondents - DoD, other government, and industry - are presented for two sets of selected questions. One set focuses on DoD technical reports: their use and importance, reasons for non-use, the factors affecting their use, the sources used to find out about them and the sources used to physically obtain them, and the quality of DoD technical reports. The second set focuses on information sources used in problem solving: the use of U.S. government technical reports in problem solving and the information sources used to find out about U.S. government technical reports.

Assessing conceptual models for subsurface reactive transport of inorganic contaminants

USGS Publications Warehouse

Davis, James A.; Yabusaki, Steven B.; Steefel, Carl; Zachara, John M.; Curtis, Gary P.; Redden, George D.; Criscenti, Louise J.; Honeyman, Bruce D.

2004-01-01

In many subsurface situations where human health and environmental quality are at risk (e.g., contaminant hydrogeology petroleum extraction, carbon sequestration, etc.),scientists and engineers are being asked by federal agency decision-makers to predict the fate of chemical species under conditions where both reactions and transport are processes of first-order importance.In 2002, a working group (WG) was formed by representatives of the U.S. Geological Survey, Environmental Protection Agency, Department of Energy Nuclear Regulatory Commission, Department of Agriculture, and Army Engineer Research and Development Center to assess the role of reactive transport modeling (RTM) in addressing these situations. Specifically the goals of the WG are to (1) evaluate the state of the art in conceptual model development and parameterization for RTM, as applied to soil,vadose zone, and groundwater systems, and (2) prioritize research directions that would enhance the practical utility of RTM.

Simulation teaching method in Engineering Optics

NASA Astrophysics Data System (ADS)

Lu, Qieni; Wang, Yi; Li, Hongbin

2017-08-01

We here introduce a pedagogical method of theoretical simulation as one major means of the teaching process of "Engineering Optics" in course quality improvement action plan (Qc) in our school. Students, in groups of three to five, complete simulations of interference, diffraction, electromagnetism and polarization of light; each student is evaluated and scored in light of his performance in the interviews between the teacher and the student, and each student can opt to be interviewed many times until he is satisfied with his score and learning. After three years of Qc practice, the remarkable teaching and learning effect is obatined. Such theoretical simulation experiment is a very valuable teaching method worthwhile for physical optics which is highly theoretical and abstruse. This teaching methodology works well in training students as to how to ask questions and how to solve problems, which can also stimulate their interest in research learning and their initiative to develop their self-confidence and sense of innovation.

Colour-crafted phosphor-free white light emitters via in-situ nanostructure engineering.

PubMed

Min, Daehong; Park, Donghwy; Lee, Kyuseung; Nam, Okhyun

2017-03-08

Colour-temperature (T c ) is a crucial specification of white light-emitting diodes (WLEDs) used in a variety of smart-lighting applications. Commonly, T c is controlled by distributing various phosphors on top of the blue or ultra violet LED chip in conventional phosphor-conversion WLEDs (PC-WLEDs). Unfortunately, the high cost of phosphors, additional packaging processes required, and phosphor degradation by internal thermal damage must be resolved to obtain higher-quality PC-WLEDs. Here, we suggest a practical in-situ nanostructure engineering strategy for fabricating T c -controlled phosphor-free white light-emitting diodes (PF-WLEDs) using metal-organic chemical vapour deposition. The dimension controls of in-situ nanofacets on gallium nitride nanostructures, and the growth temperature of quantum wells on these materials, were key factors for T c control. Warm, true, and cold white emissions were successfully demonstrated in this study without any external processing.

Colour-crafted phosphor-free white light emitters via in-situ nanostructure engineering

PubMed Central

Min, Daehong; Park, Donghwy; Lee, Kyuseung; Nam, Okhyun

2017-01-01

Colour-temperature (Tc) is a crucial specification of white light-emitting diodes (WLEDs) used in a variety of smart-lighting applications. Commonly, Tc is controlled by distributing various phosphors on top of the blue or ultra violet LED chip in conventional phosphor-conversion WLEDs (PC-WLEDs). Unfortunately, the high cost of phosphors, additional packaging processes required, and phosphor degradation by internal thermal damage must be resolved to obtain higher-quality PC-WLEDs. Here, we suggest a practical in-situ nanostructure engineering strategy for fabricating Tc-controlled phosphor-free white light-emitting diodes (PF-WLEDs) using metal-organic chemical vapour deposition. The dimension controls of in-situ nanofacets on gallium nitride nanostructures, and the growth temperature of quantum wells on these materials, were key factors for Tc control. Warm, true, and cold white emissions were successfully demonstrated in this study without any external processing. PMID:28272455

Hydrology for Engineers, Geologists, and Environmental Professionals

NASA Astrophysics Data System (ADS)

Ince, Simon

For people who are involved in the applied aspects of hydrology, it is refreshing to find a textbook that begins with a meaningful disclaimer, albeit in fine print on the back side of the frontispiece:“The present book and the accompanying software have been written according to the latest techniques in scientific hydrology. However, hydrology is at best an inexact science. A good book and a good computer software by themselves do not guarantee accurate or even realistic predictions. Acceptable results in the applications of hydrologic methods to engineering and environmental problems depend to a greater extend (sic) on the skills, logical assumptions, and practical experience of the user, and on the quantity and quality of long-term hydrologic data available. Neither the author nor the publisher assumes any responsibility or any liability, explicitly or implicitly, on the results or the consequences of using the information contained in this book or its accompanying software.”

Student computer attitudes, experience and perceptions about the use of two software applications in Building Engineering

NASA Astrophysics Data System (ADS)

Chiner, Esther; Garcia-Vera, Victoria E.

2017-11-01

The purpose of this study was to examine students' computer attitudes and experience, as well as students' perceptions about the use of two specific software applications (Google Drive Spreadsheets and Arquimedes) in the Building Engineering context. The relationships among these variables were also examined. Ninety-two students took part in this study. Results suggest that students hold favourable computer attitudes. Moreover, it was found a significant positive relationship among students' attitudes and their computer experience. Findings also show that students find Arquimedes software more useful and with higher output quality than Google Drive Spreadsheets, while the latter is perceived to be easier to use. Regarding the relationship among students' attitudes towards the use of computers and their perceptions about the use of both software applications, only a significant positive relationship in the case of Arquimedes was found. Findings are discussed in terms of its implications for practice and further research.

Comparing historical and modern methods of Sea Surface Temperature measurement - Part 1: Review of methods, field comparisons and dataset adjustments

NASA Astrophysics Data System (ADS)

Matthews, J. B. R.

2012-09-01

Sea Surface Temperature (SST) measurements have been obtained from a variety of different platforms, instruments and depths over the post-industrial period. Today most measurements come from ships, moored and drifting buoys and satellites. Shipboard methods include temperature measurement of seawater sampled by bucket and in engine cooling water intakes. Engine intake temperatures are generally thought to average a few tenths of a °C warmer than simultaneous bucket temperatures. Here I review SST measurement methods, studies comparing shipboard methods by field experiment and adjustments applied to SST datasets to account for variable methods. In opposition to contemporary thinking, I find average bucket-intake temperature differences reported from field studies inconclusive. Non-zero average differences often have associated standard deviations that are several times larger than the averages themselves. Further, average differences have been found to vary widely between ships and between cruises on the same ship. The cause of non-zero average differences is typically unclear given the general absence of additional temperature observations to those from buckets and engine intakes. Shipboard measurements appear of variable quality, highly dependent upon the accuracy and precision of the thermometer used and the care of the observer where manually read. Methods are generally poorly documented, with written instructions not necessarily reflecting actual practices of merchant mariners. Measurements cannot be expected to be of high quality where obtained by untrained sailors using thermometers of low accuracy and precision.

Mass imbalances in EPANET water-quality simulations

NASA Astrophysics Data System (ADS)

Davis, Michael J.; Janke, Robert; Taxon, Thomas N.

2018-04-01

EPANET is widely employed to simulate water quality in water distribution systems. However, in general, the time-driven simulation approach used to determine concentrations of water-quality constituents provides accurate results only for short water-quality time steps. Overly long time steps can yield errors in concentration estimates and can result in situations in which constituent mass is not conserved. The use of a time step that is sufficiently short to avoid these problems may not always be feasible. The absence of EPANET errors or warnings does not ensure conservation of mass. This paper provides examples illustrating mass imbalances and explains how such imbalances can occur because of fundamental limitations in the water-quality routing algorithm used in EPANET. In general, these limitations cannot be overcome by the use of improved water-quality modeling practices. This paper also presents a preliminary event-driven approach that conserves mass with a water-quality time step that is as long as the hydraulic time step. Results obtained using the current approach converge, or tend to converge, toward those obtained using the preliminary event-driven approach as the water-quality time step decreases. Improving the water-quality routing algorithm used in EPANET could eliminate mass imbalances and related errors in estimated concentrations. The results presented in this paper should be of value to those who perform water-quality simulations using EPANET or use the results of such simulations, including utility managers and engineers.

Quality Assurance in Engineering Education: Comparison of Accreditation Schemes and ISO 9001.

ERIC Educational Resources Information Center

Karapetrovic, Stanislav; Rajamani, Divakar; Willborn, Walter

1998-01-01

Outlines quality assurance schemes for distance-education technologies that are based on the ISO 9000 family of international quality-assurance standards. Argues that engineering faculties can establish such systems on the basis of and integrated with accreditation schemes. Contains 34 references. (DDR)

40 CFR 86.004-40 - Heavy-duty engine rebuilding practices.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Provisions for Emission Regulations for 1977 and Later Model Year New Light-Duty Vehicles, Light-Duty Trucks and Heavy-Duty Engines, and for 1985 and Later Model Year New Gasoline Fueled, Natural Gas-Fueled... rebuilding practices. The provisions of this section are applicable to heavy-duty engines subject to model...

Modeling as an Engineering Habit of Mind and Practice

ERIC Educational Resources Information Center

Lammi, Matthew D.; Denson, Cameron D.

2017-01-01

In this paper we examine a case study of a pedagogical strategy that focuses on the teaching of modeling as a habit of mind and practice for novice designers engaged in engineering design challenges. In an engineering design course, pre-service teachers created modeling artifacts in the form of conceptual models, graphical models, mathematical…

Study of small civil turbofan engines applicable to military trainer airplanes

NASA Technical Reports Server (NTRS)

Heldenbrand, R. W.; Merrill, G. L.; Burnett, G. A.

1975-01-01

Small turbofan engine design concepts were applied to military trainer airplanes to establish the potential for commonality between civil and military engines. Several trainer configurations were defined and studied. A ""best'' engine was defined for the trainer mission, and sensitivity analyses were performed to determine the effects on airplane size and efficiency of wing loading, power loading, configuration, aerodynamic quality, and engine quality. It is concluded that a small civil aircraft is applicable to military trainer airplanes. Aircraft designed with these engines are smaller, less costly, and more efficient than existing trainer aircraft.

Ways of thinking about and teaching ethical problem solving: microethics and macroethics in engineering.

PubMed

Herkert, Joseph R

2005-07-01

Engineering ethics entails three frames of reference: individual, professional, and social. "Microethics" considers individuals and internal relations of the engineering profession; "macroethics" applies to the collective social responsibility of the profession and to societal decisions about technology. Most research and teaching in engineering ethics, including online resources, has had a "micro" focus. Mechanisms for incorporating macroethical perspectives include: integrating engineering ethics and science, technology and society (STS); closer integration of engineering ethics and computer ethics; and consideration of the influence of professional engineering societies and corporate social responsibility programs on ethical engineering practice. Integrating macroethical issues and concerns in engineering ethics involves broadening the context of ethical problem solving. This in turn implies: developing courses emphasizing both micro and macro perspectives, providing faculty development that includes training in both STS and practical ethics; and revision of curriculum materials, including online resources. Multidisciplinary collaboration is recommended 1) to create online case studies emphasizing ethical decision making in individual, professional, and societal contexts; 2) to leverage existing online computer ethics resources with relevance to engineering education and practice; and 3) to create transparent linkages between public policy positions advocated by professional societies and codes of ethics.

eLearning Hands-On: Blending Interactive eLearning with Practical Engineering Laboratory

ERIC Educational Resources Information Center

Kiravu, Cheddi; Yanev, Kamen M.; Tunde, Moses O.; Jeffrey, Anna M.; Schoenian, Dirk; Renner, Ansel

2016-01-01

Purpose: Integrating laboratory work into interactive engineering eLearning contents augments theory with practice while simultaneously ameliorating the apparent theory-practice gap in traditional eLearning. The purpose of this paper is to assess and recommend media that currently fulfil this desirable dual pedagogical goal.…

Flight test results for several light, canard-configured airplanes

NASA Technical Reports Server (NTRS)

Brown, Philip W.

1987-01-01

Brief flight evaluations of two different, light, composite constructed, canard and winglet configured airplanes were performed to assess their handling qualities; one airplane was a single engine, pusher design and the other a twin engine, push-pull configuration. An emphasis was placed on the slow speed/high angle of attack region for both airplanes and on the engine-out regime for the twin. Mission suitability assessment included cockpit and control layout, ground and airborne handling qualities, and turbulence response. Very limited performance data was taken. Stall/spin tests and the effects of laminar flow loss on performance and handling qualities were assessed on an extended range, single engine pusher design.

Predicting nonpoint stormwater runoff quality from land use

PubMed Central

2018-01-01

Evaluating the impact of urban development on natural ecosystem processes has become an increasingly complex task for planners, environmental scientists, and engineers. As the built environment continues to grow, unregulated nonpoint pollutants from increased human activity and large-scale development severely stress urban streams and lakes resulting in their currently impaired or degraded state. In response, integrated water quality management programs have been adopted to address these unregulated nonpoint pollutants by utilizing best management practices (BMPs) that treat runoff as close to the source as possible. Knowing where to install effective BMPs is no trivial task, considering budget constraints and the spatially extensive nature of nonpoint stormwater runoff. Accordingly, this paper presents an initial, straightforward and cost-effective methodology to identify critical nonpoint pollutant source watersheds through correlation of water quality with land use. Through an illustrative application to metropolitan Denver, Colorado, it is shown how this method can be used to aid stormwater professionals to evaluate and specify retrofit locations in need of water quality treatment features reduce, capture and treat stormwater runoff prior to entering receiving waters. PMID:29742172

Predicting nonpoint stormwater runoff quality from land use.

PubMed

Zivkovich, Brik R; Mays, David C

2018-01-01

Evaluating the impact of urban development on natural ecosystem processes has become an increasingly complex task for planners, environmental scientists, and engineers. As the built environment continues to grow, unregulated nonpoint pollutants from increased human activity and large-scale development severely stress urban streams and lakes resulting in their currently impaired or degraded state. In response, integrated water quality management programs have been adopted to address these unregulated nonpoint pollutants by utilizing best management practices (BMPs) that treat runoff as close to the source as possible. Knowing where to install effective BMPs is no trivial task, considering budget constraints and the spatially extensive nature of nonpoint stormwater runoff. Accordingly, this paper presents an initial, straightforward and cost-effective methodology to identify critical nonpoint pollutant source watersheds through correlation of water quality with land use. Through an illustrative application to metropolitan Denver, Colorado, it is shown how this method can be used to aid stormwater professionals to evaluate and specify retrofit locations in need of water quality treatment features reduce, capture and treat stormwater runoff prior to entering receiving waters.

77 FR 51786 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-27

... to increasing the number and quality of the nation's scientists and engineers. Application... Engineering, Biosciences, Chemical Engineering, Chemistry, Civil Engineering, Cognitive, Neural, and...

Building community partnerships to implement the new Science and Engineering component of the NGSS

NASA Astrophysics Data System (ADS)

Burke, M. P.; Linn, F.

2013-12-01

Partnerships between science professionals in the community and professional educators can help facilitate the adoption of the Next Generation Science Standards (NGSS). Classroom teachers have been trained in content areas but may be less familiar with the new required Science and Engineering component of the NGSS. This presentation will offer a successful model for building classroom and community partnerships and highlight the particulars of a collaborative lesson taught to Rapid City High School students. Local environmental issues provided a framework for learning activities that encompassed several Crosscutting Concepts and Science and Engineering Practices for a lesson focused on Life Science Ecosystems: Interactions, Energy, and Dynamics. Specifically, students studied local water quality impairments, collected and measured stream samples, and analyzed their data. A visiting hydrologist supplied additional water quality data from ongoing studies to extend the students' datasets both temporally and spatially, helping students to identify patterns and draw conclusions based on their findings. Context was provided through discussions of how science professionals collect and analyze data and communicate results to the public, using an example of a recent bacterial contamination of a local stream. Working with Rapid City High School students added additional challenges due to their high truancy and poverty rates. Creating a relevant classroom experience was especially critical for engaging these at-risk youth and demonstrating that science is a viable career path for them. Connecting science in the community with the problem-solving nature of engineering is a critical component of NGSS, and this presentation will elucidate strategies to help prospective partners maneuver through the challenges that we've encountered. We recognize that the successful implementation of the NGSS is a challenge that requires the support of the scientific community. This partnership represents one model of science and education professionals collaborating to incorporate science and engineering activities into the curriculum.

Environmental Science and Engineering Merit Badges: An Exploratory Case Study of a Non-Formal Science Education Program and the U.S. Scientific and Engineering Practices

ERIC Educational Resources Information Center

Vick, Matthew E.; Garvey, Michael P.

2016-01-01

The Boy Scouts of America's Environmental Science and Engineering merit badges are two of their over 120 merit badges offered as a part of a non-formal educational program to U.S. boys. The Scientific and Engineering Practices of the U.S. Next Generation Science Standards provide a vision of science education that includes integrating eight…

Structural engineering masters level education framework of knowledge for the needs of initial professional practice

NASA Astrophysics Data System (ADS)

Balogh, Zsuzsa Enriko

For at least the last decade, engineering, civil engineering, along with structural engineering as a profession within civil engineering, have and continue to face an emerging need for "Raising the Bar" of preparedness of young engineers seeking to become practicing professional engineers. The present consensus of the civil engineering profession is that the increasing need for broad and in-depth knowledge should require the young structural engineers to have at least a Masters-Level education. This study focuses on the Masters-Level preparedness in the structural engineering area within the civil engineering field. It follows much of the methodology used in the American Society of Civil Engineers (ASCE) Body of Knowledge determination for civil engineering and extends this type of study to better define the portion of the young engineers preparation beyond the undergraduate program for one specialty area of civil engineering. The objective of this research was to create a Framework of Knowledge for the young engineer which identifies and recognizes the needs of the profession, along with the profession's expectations of how those needs can be achieved in the graduate-level academic setting, in the practice environment, and through lifelong learning opportunities with an emphasis on the initial five years experience past completion of a Masters program in structural engineering. This study applied a modified Delphi method to obtain the critical information from members of the structural engineering profession. The results provide a Framework of Knowledge which will be useful to several groups seeking to better ensure the preparedness of the future young structural engineers at the Masters-Level.

Instruments to assess the quality of health information on the World Wide Web: what can our patients actually use?

PubMed

Bernstam, Elmer V; Shelton, Dawn M; Walji, Muhammad; Meric-Bernstam, Funda

2005-01-01

To find and assess quality-rating instruments that can be used by health care consumers to assess websites displaying health information. Searches of PubMed, the World Wide Web (using five different search engines), reference tracing from identified articles, and a review of the of the American Medical Informatics Association's annual symposium proceedings. Sources were examined for availability, number of elements, objectivity, and readability. A total of 273 distinct instruments were found and analyzed. Of these, 80 (29%) made evaluation criteria publicly available and 24 (8.7%) had 10 or fewer elements (items that a user has to assess to evaluate a website). Seven instruments consisted of elements that could all be evaluated objectively. Of these seven, one instrument consisted entirely of criteria with acceptable interobserver reliability (kappa> or =0.6); another instrument met readability standards. There are many quality-rating instruments, but few are likely to be practically usable by the intended audience.

Protecting Public Health: Plug-In Electric Vehicle Charging and the Healthcare Industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryder, Carrie; Lommele, Stephen

In 2014, the U.S. transportation sector consumed more than 13 million barrels of petroleum a day, approximately 70% of all domestic petroleum consumption. Internal combustion engine vehicles are major sources of greenhouse gases (GHGs), smog-forming compounds, particulate matter, and other air pollutants. Widespread use of alternative fuels and advanced vehicles, including plug-in electric vehicles (PEVs), can reduce our national dependence on petroleum and decrease the emissions that impact our air quality and public health. Healthcare organizations are major employers and community leaders that are committed to public well-being and are often early adopters of employer best practices. A growing numbermore » of hospitals are offering PEV charging stations for employees to help promote driving electric vehicles, reduce their carbon footprint, and improve local air quality.« less

Summary of nondestructive testing theory and practice

NASA Technical Reports Server (NTRS)

Meister, R. P.; Randall, M. D.; Mitchell, D. K.; Williams, L. P.; Pattee, H. E.

1972-01-01

The ability to fabricate design critical and man-rated aerospace structures using materials near the limits of their capabilities requires a comprehensive and dependable assurance program. The quality assurance program must rely heavily on nondestructive testing methods for thorough inspection to assess properties and quality of hardware items. A survey of nondestructive testing methods is presented to provide space program managers, supervisors and engineers who are unfamiliar with this technical area with appropriate insight into the commonly accepted nondestructive testing methods available, their interrelationships, used, advantages and limitations. Primary emphasis is placed on the most common methods: liquid penetrant, magnetic particle, radiography, ultrasonics and eddy current. A number of the newer test techniques including thermal, acoustic emission, holography, microwaves, eddy-sonic and exo-electron emission, which are beginning to be used in applications of interest to NASA, are also discussed briefly.

Engineering Good: How Engineering Metaphors Help us to Understand the Moral Life and Change Society

PubMed Central

2009-01-01

Engineering can learn from ethics, but ethics can also learn from engineering. In this paper, I discuss what engineering metaphors can teach us about practical philosophy. Using metaphors such as calculation, performance, and open source, I articulate two opposing views of morality and politics: one that relies on images related to engineering as science and one that draws on images of engineering practice. I argue that the latter view and its metaphors provide a more adequate way to understand and guide the moral life. Responding to two problems of alienation and taking into account developments such as Fab Lab I then further explore the implications of this view for engineering and society. PMID:19722107

Implementation and implication of total quality management on client- contractor relationship in residential projects

NASA Astrophysics Data System (ADS)

Murali, Swetha; Ponmalar, V.

2017-07-01

To make innovation and continuous improvement as a norm, some traditional practices must become unlearnt. Change for growth and competitiveness are required for sustainability for any profitable business such as the construction industry. The leading companies are willing to implement Total Quality Management (TQM) principles, to realise potential advantages and improve growth and efficiency. Ironically, researches recollected quality as the most significant provider for competitive advantage in industrial leadership. The two objectives of this paper are 1) Identify TQM effectiveness in residential projects and 2) Identify the client satisfaction/dissatisfaction areas using Analytical Hierarchy Process (AHP) and suggest effective mitigate measures. Using statistical survey techniques like set of questionnaire survey, it is observed that total quality management was applied in some leading successful organization to an extent. The main attributes for quality achievement can be defined as teamwork and better communication with single agreed goal between client and contractor. Onsite safety is a paramount attribute in the identifying quality within the residential projects. It was noticed that the process based quality methods such as onsite safe working condition; safe management system and modern engineering process safety controls etc. as interlinked functions. Training and effective communication with all stakeholders on quality management principles is essential for effective quality work. Late Only through effective TQM principles companies can avoid some contract litigations with an increased client satisfaction Index.

Second-Guessing Scientists and Engineers: Post Hoc Criticism and the Reform of Practice in Green Chemistry and Engineering.

PubMed

Lynch, William T

2015-10-01

The article examines and extends work bringing together engineering ethics and Science and Technology Studies, which had built upon Diane Vaughan's analysis of the Challenger shuttle accident as a test case. Reconsidering the use of her term "normalization of deviance," the article argues for a middle path between moralizing against and excusing away engineering practices contributing to engineering disaster. To explore an illustrative pedagogical case and to suggest avenues for constructive research developing this middle path, it examines the emergence of green chemistry and green engineering. Green chemistry began when Paul Anastas and John Warner developed a set of new rules for chemical synthesis that sought to learn from missed opportunities to avoid environmental damage in the twentieth century, an approach that was soon extended to engineering as well. Examination of tacit assumptions about historical counterfactuals in recent, interdisciplinary discussions of green chemistry illuminate competing views about the field's prospects. An integrated perspective is sought, addressing how both technical practice within chemistry and engineering and the influence of a wider "social movement" can play a role in remedying environmental problems.

Software Writing Skills for Your Research - Lessons Learned from Workshops in the Geosciences

NASA Astrophysics Data System (ADS)

Hammitzsch, Martin

2016-04-01

Findings presented in scientific papers are based on data and software. Once in a while they come along with data - but not commonly with software. However, the software used to gain findings plays a crucial role in the scientific work. Nevertheless, software is rarely seen publishable. Thus researchers may not reproduce the findings without the software which is in conflict with the principle of reproducibility in sciences. For both, the writing of publishable software and the reproducibility issue, the quality of software is of utmost importance. For many programming scientists the treatment of source code, e.g. with code design, version control, documentation, and testing is associated with additional work that is not covered in the primary research task. This includes the adoption of processes following the software development life cycle. However, the adoption of software engineering rules and best practices has to be recognized and accepted as part of the scientific performance. Most scientists have little incentive to improve code and do not publish code because software engineering habits are rarely practised by researchers or students. Software engineering skills are not passed on to followers as for paper writing skill. Thus it is often felt that the software or code produced is not publishable. The quality of software and its source code has a decisive influence on the quality of research results obtained and their traceability. So establishing best practices from software engineering to serve scientific needs is crucial for the success of scientific software. Even though scientists use existing software and code, i.e., from open source software repositories, only few contribute their code back into the repositories. So writing and opening code for Open Science means that subsequent users are able to run the code, e.g. by the provision of sufficient documentation, sample data sets, tests and comments which in turn can be proven by adequate and qualified reviews. This assumes that scientist learn to write and release code and software as they learn to write and publish papers. Having this in mind, software could be valued and assessed as a contribution to science. But this requires the relevant skills that can be passed to colleagues and followers. Therefore, the GFZ German Research Centre for Geosciences performed three workshops in 2015 to address the passing of software writing skills to young scientists, the next generation of researchers in the Earth, planetary and space sciences. Experiences in running these workshops and the lessons learned will be summarized in this presentation. The workshops have received support and funding by Software Carpentry, a volunteer organization whose goal is to make scientists more productive, and their work more reliable, by teaching them basic computing skills, and by FOSTER (Facilitate Open Science Training for European Research), a two-year, EU-Funded (FP7) project, whose goal to produce a European-wide training programme that will help to incorporate Open Access approaches into existing research methodologies and to integrate Open Science principles and practice in the current research workflow by targeting the young researchers and other stakeholders.

Exploration and practice for engineering innovative talents training based on project-driven

NASA Astrophysics Data System (ADS)

Xu, Yishen; Lv, Qingsong; Ye, Yan; Wu, Maocheng; Gu, Jihua

2017-08-01

As one of the "excellent engineer education program" of the Ministry of Education and one of the characteristic majors of Jiangsu Province, the major of optoelectronic information science and engineering in Soochow University has a long history and distinctive features. In recent years, aiming to the talents training objective of "broad foundation, practiceoriented, to be creative", education and teaching reforms have been carried out, which emphasize basis of theoretical teaching, carrier of practical training, promotion of projects and discussion, and development of second class. By optimizing the teaching contents and course system of the theoretical courses, the engineering innovative talents training mode based on the project-driven has been implemented with playing a practical training carrier role and overall managing the second class teaching for cultivating students' innovative spirit and practical ability. Meanwhile, the evaluation mechanism of the students' comprehensive performance mainly based on "scores of theory test" is being gradually changed, and the activities such as scientific research, discipline competitions and social practices are playing an increasing important role in the students' comprehensive assessment. The produced achievements show that the proposed training model based on project-driven could stimulate the students' enthusiasm and initiative to participate in research activities and promote the training of students' ability of engineering practice and consciousness of innovation.

The Critical Incident Technique: An Effective Tool for Gathering Experience from Practicing Engineers

ERIC Educational Resources Information Center

Hanson, James H.; Brophy, Patrick D.

2012-01-01

Not all knowledge and skills that educators want to pass to students exists yet in textbooks. Some still resides only in the experiences of practicing engineers (e.g., how engineers create new products, how designers identify errors in calculations). The critical incident technique, CIT, is an established method for cognitive task analysis. It is…

Examination of Assessment Practices for Engineering Design Projects in Secondary Technology Education (Second Article in 3-Part Series)

ERIC Educational Resources Information Center

Kelley, Todd R.; Wicklein, Robert C.

2009-01-01

Based on the efforts to infuse engineering practices within the technology education curriculum it is appropriate to now investigate how technology education teachers are assessing engineering design activities within their classrooms. This descriptive study drew a full sample of high school technology teachers from the current International…

40 CFR 68.56 - Maintenance.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...

40 CFR 68.56 - Maintenance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...

40 CFR 68.56 - Maintenance.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...

40 CFR 68.56 - Maintenance.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...

40 CFR 68.56 - Maintenance.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...

Reconfiguring practice: the interdependence of experimental procedure and computing infrastructure in distributed earthquake engineering.

PubMed

De La Flor, Grace; Ojaghi, Mobin; Martínez, Ignacio Lamata; Jirotka, Marina; Williams, Martin S; Blakeborough, Anthony

2010-09-13

When transitioning local laboratory practices into distributed environments, the interdependent relationship between experimental procedure and the technologies used to execute experiments becomes highly visible and a focal point for system requirements. We present an analysis of ways in which this reciprocal relationship is reconfiguring laboratory practices in earthquake engineering as a new computing infrastructure is embedded within three laboratories in order to facilitate the execution of shared experiments across geographically distributed sites. The system has been developed as part of the UK Network for Earthquake Engineering Simulation e-Research project, which links together three earthquake engineering laboratories at the universities of Bristol, Cambridge and Oxford. We consider the ways in which researchers have successfully adapted their local laboratory practices through the modification of experimental procedure so that they may meet the challenges of coordinating distributed earthquake experiments.

Security Quality Requirements Engineering (SQUARE): Case Study Phase III

DTIC Science & Technology

2006-05-01

Security Quality Requirements Engineering (SQUARE): Case Study Phase III Lydia Chung Frank Hung Eric Hough Don Ojoko-Adams Advisor...Engineering (SQUARE): Case Study Phase III CMU/SEI-2006-SR-003 Lydia Chung Frank Hung Eric Hough Don Ojoko-Adams Advisor Nancy R. Mead...1 1.1 The SQUARE Process ............................................................................... 1 1.2 Case Study Clients

A Framework for Quality K-12 Engineering Education: Research and Development

ERIC Educational Resources Information Center

Moore, Tamara J.; Glancy, Aran W.; Tank, Kristina M.; Kersten, Jennifer A.; Smith, Karl A.; Stohlmann, Micah S.

2014-01-01

Recent U.S. national documents have laid the foundation for highlighting the connection between science, technology, engineering and mathematics at the K-12 level. However, there is not a clear definition or a well-established tradition of what constitutes a quality engineering education at the K-12 level. The purpose of the current work has been…

Requirements model for an e-Health awareness portal

NASA Astrophysics Data System (ADS)

Hussain, Azham; Mkpojiogu, Emmanuel O. C.; Nawi, Mohd Nasrun M.

2016-08-01

Requirements engineering is at the heart and foundation of software engineering process. Poor quality requirements inevitably lead to poor quality software solutions. Also, poor requirement modeling is tantamount to designing a poor quality product. So, quality assured requirements development collaborates fine with usable products in giving the software product the needed quality it demands. In the light of the foregoing, the requirements for an e-Ebola Awareness Portal were modeled with a good attention given to these software engineering concerns. The requirements for the e-Health Awareness Portal are modeled as a contribution to the fight against Ebola and helps in the fulfillment of the United Nation's Millennium Development Goal No. 6. In this study requirements were modeled using UML 2.0 modeling technique.

Quality transitivity and traceability system of herbal medicine products based on quality markers.

PubMed

Liu, Changxiao; Guo, De-An; Liu, Liang

2018-05-15

Due to a variety of factors to affect the herb quality, the existing quality management model is unable to evaluate the process control. The development of the concept of "quality marker" (Q-marker) lays basis for establishing an independent process quality control system for herbal products. To ensure the highest degree of safety, effectiveness and quality process control of herbal products, it is aimed to establish a quality transitivity and traceability system of quality and process control from raw materials to finished herbal products. Based on the key issues and challenges of quality assessment, the current status of quality and process controls from raw materials to herbal medicinal products listed in Pharmacopoeia were analyzed and the research models including discovery and identification of Q-markers, analysis and quality management of risk evaluation were designed. Authors introduced a few new technologies and methodologies, such as DNA barcoding, chromatographic technologies, fingerprint analysis, chemical markers, bio-responses, risk management and solution for quality process control. The quality and process control models for herbal medicinal products were proposed and the transitivity and traceability system from raw materials to the finished products was constructed to improve the herbal quality from the entire supply and production chain. The transitivity and traceability system has been established based on quality markers, especially on how to control the production process under Good Engineering Practices, as well as to implement the risk management for quality and process control in herbal medicine production. Copyright © 2018 Elsevier GmbH. All rights reserved.

MATLAB Meets LEGO Mindstorms--A Freshman Introduction Course into Practical Engineering

ERIC Educational Resources Information Center

Behrens, A.; Atorf, L.; Schwann, R.; Neumann, B.; Schnitzler, R.; Balle, J.; Herold, T.; Telle, A.; Noll, T. G.; Hameyer, K.; Aach, T.

2010-01-01

In today's teaching and learning approaches for first-semester students, practical courses more and more often complement traditional theoretical lectures. This practical element allows an early insight into the real world of engineering, augments student motivation, and enables students to acquire soft skills early. This paper describes a new…

Stirring the Pot: Supporting and Challenging General Education Science, Technology, Engineering, and Mathematics Faculty to Change Teaching and Assessment Practice

ERIC Educational Resources Information Center

Stieha, Vicki; Shadle, Susan E.; Paterson, Sharon

2016-01-01

Evidence-based instructional practices (ebips) have been associated with positive student outcomes; however, institutions struggle to catalyze widespread adoption of these practices in general education science, technology, engineering, and mathematics (stem) courses. Further, linking ebips with integrated learning assessment is rarely discussed…

A Triangular Approach to Integrate Research, Education and Practice in Higher Engineering Education

ERIC Educational Resources Information Center

Heikkinen, Eetu-Pekka; Jaako, Juha; Hiltunen, Jukka

2017-01-01

Separate approaches in engineering education, research and practice are not very useful when preparing students for working life; instead, integration of education, research and industrial practices is needed. A triangular approach (TA) as a method to accomplish this integration and as a method to provide students with integrated expertise is…

A Language for the Analysis of Disciplinary Boundary Crossing: Insights from Engineering Problem-Solving Practice

ERIC Educational Resources Information Center

Wolff, Karin

2018-01-01

Poor graduate throughput and industry feedback on graduate inability to cope with the complex knowledge practices in twenty-first century engineering "problem solving" have placed pressure on educators to better conceptualise the theory-practice relationship, particularly in technology-dependent professions. The research draws on the…

Flow Quality for Turbine Engine Loads Simulator (TELS) Facility

DTIC Science & Technology

1980-06-01

2.2 GAS INGESTION A mathematical simulation of the turbojet engine and jet deflector was formulated to estimate the severity of the recirculating...3. Swain. R. L. and Mitchell, J. G. "’Smlulatlon of Turbine Engine Operational Loads." Journal of Aircraft Vol. 15, No. 6, June 1978• 4. Ryan, J...3 AEDC-TR-79-83 ~...~ i ,i g - Flow Quality for Turbine Engine Loads Simulator (TELS) Facility R..I. Schulz ARO, Inc. June 1980

Rocksalt nitride metal/semiconductor superlattices: A new class of artificially structured materials

NASA Astrophysics Data System (ADS)

Saha, Bivas; Shakouri, Ali; Sands, Timothy D.

2018-06-01

Artificially structured materials in the form of superlattice heterostructures enable the search for exotic new physics and novel device functionalities, and serve as tools to push the fundamentals of scientific and engineering knowledge. Semiconductor heterostructures are the most celebrated and widely studied artificially structured materials, having led to the development of quantum well lasers, quantum cascade lasers, measurements of the fractional quantum Hall effect, and numerous other scientific concepts and practical device technologies. However, combining metals with semiconductors at the atomic scale to develop metal/semiconductor superlattices and heterostructures has remained a profoundly difficult scientific and engineering challenge. Though the potential applications of metal/semiconductor heterostructures could range from energy conversion to photonic computing to high-temperature electronics, materials challenges primarily had severely limited progress in this pursuit until very recently. In this article, we detail the progress that has taken place over the last decade to overcome the materials engineering challenges to grow high quality epitaxial, nominally single crystalline metal/semiconductor superlattices based on transition metal nitrides (TMN). The epitaxial rocksalt TiN/(Al,Sc)N metamaterials are the first pseudomorphic metal/semiconductor superlattices to the best of our knowledge, and their physical properties promise a new era in superlattice physics and device engineering.

Elementary teachers' mental models of engineering design processes: A comparison of two communities of practice

NASA Astrophysics Data System (ADS)

McMahon, Ann P.

Educating K-12 students in the processes of design engineering is gaining popularity in public schools. Several states have adopted standards for engineering design despite the fact that no common agreement exists on what should be included in the K-12 engineering design process. Furthermore, little pre-service and in-service professional development exists that will prepare teachers to teach a design process that is fundamentally different from the science teaching process found in typical public schools. This study provides a glimpse into what teachers think happens in engineering design compared to articulated best practices in engineering design. Wenger's communities of practice work and van Dijk's multidisciplinary theory of mental models provide the theoretical bases for comparing the mental models of two groups of elementary teachers (one group that teaches engineering and one that does not) to the mental models of design engineers (including this engineer/researcher/educator and professionals described elsewhere). The elementary school teachers and this engineer/researcher/educator observed the design engineering process enacted by professionals, then answered questions designed to elicit their mental models of the process they saw in terms of how they would teach it to elementary students. The key finding is this: Both groups of teachers embedded the cognitive steps of the design process into the matrix of the social and emotional roles and skills of students. Conversely, the engineers embedded the social and emotional aspects of the design process into the matrix of the cognitive steps of the design process. In other words, teachers' mental models show that they perceive that students' social and emotional communicative roles and skills in the classroom drive their cognitive understandings of the engineering process, while the mental models of this engineer/researcher/educator and the engineers in the video show that we perceive that cognitive understandings of the engineering process drive the social and emotional roles and skills used in that process. This comparison of mental models with the process that professional designers use defines a problem space for future studies that investigate how to incorporate engineering practices into elementary classrooms. Recommendations for engineering curriculum development and teacher professional development based on this study are presented.

Conference Proceedings of the Productivity Program Implementation Conference Held in Jacksonville, Florida on 20-22 May 1981.

DTIC Science & Technology

1981-05-01

first Quality Circle was registered with the Japanese Union of Scientists and Engineers (JUSE) in 1962. The concept was conceived by Dr. Kaoru ... Ishikawa , a professor of engineering at Tokyo University, and developed under the sponsorship of . JUSE. Quality Circles fuse the quality sciences

Problems of Accreditation and Quality Assurance of Engineering Education in Developing Countries.

ERIC Educational Resources Information Center

Bordia, Surek

2001-01-01

Discusses the relationship between funding, management, and quality assurance in engineering education in developing countries. Presents a few case studies on problems of accreditation and quality assessment in larger developing countries such as India and the Philippines, and also in very small developing countries such as Papua New Guinea, Fiji,…

Aligning Practice to Policies: Changing the Culture to Recognize and Reward Teaching at Research Universities.

PubMed

Dennin, Michael; Schultz, Zachary D; Feig, Andrew; Finkelstein, Noah; Greenhoot, Andrea Follmer; Hildreth, Michael; Leibovich, Adam K; Martin, James D; Moldwin, Mark B; O'Dowd, Diane K; Posey, Lynmarie A; Smith, Tobin L; Miller, Emily R

2017-01-01

Recent calls for improvement in undergraduate education within STEM (science, technology, engineering, and mathematics) disciplines are hampered by the methods used to evaluate teaching effectiveness. Faculty members at research universities are commonly assessed and promoted mainly on the basis of research success. To improve the quality of undergraduate teaching across all disciplines, not only STEM fields, requires creating an environment wherein continuous improvement of teaching is valued, assessed, and rewarded at various stages of a faculty member's career. This requires consistent application of policies that reflect well-established best practices for evaluating teaching at the department, college, and university levels. Evidence shows most teaching evaluation practices do not reflect stated policies, even when the policies specifically espouse teaching as a value. Thus, alignment of practice to policy is a major barrier to establishing a culture in which teaching is valued. Situated in the context of current national efforts to improve undergraduate STEM education, including the Association of American Universities Undergraduate STEM Education Initiative, this essay discusses four guiding principles for aligning practice with stated priorities in formal policies: 1) enhancing the role of deans and chairs; 2) effectively using the hiring process; 3) improving communication; and 4) improving the understanding of teaching as a scholarly activity. In addition, three specific examples of efforts to improve the practice of evaluating teaching are presented as examples: 1) Three Bucket Model of merit review at the University of California, Irvine; (2) Evaluation of Teaching Rubric, University of Kansas; and (3) Teaching Quality Framework, University of Colorado, Boulder. These examples provide flexible criteria to holistically evaluate and improve the quality of teaching across the diverse institutions comprising modern higher education. © 2017 M. Dennin et al. CBE—Life Sciences Education © 2017 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

What's in a name? Tensions between formal and informal communities of practice among regional subspecialty cancer surgeons.

PubMed

Kitto, Simon C; Grant, Rachel E; Peller, Jennifer; Moulton, Carol-Anne; Gallinger, Steven

2018-03-01

In 2007 the Cancer Care Ontario Hepatobiliary-Pancreatic (HPB) Community of Practice was formed during the wake of provincial regionalization of HPB services in Ontario, Canada. Despite being conceptualized within the literature as an educational intervention, communities of practice (CoP) are increasingly being adopted in healthcare as quality improvement initiatives. A qualitative case study approach using in-depth interviews and document analysis was employed to gain insight into the perceptions and attitudes of the HPB surgeons in the CoP. This study demonstrates how an engineered formal or idealized structure of a CoP was created in tension with the natural CoPs that HPB surgeons identified with during and after their training. This tension contributed to the inactive and/or marginal participation by some of the surgeons in the CoP. The findings of this study represent a cautionary tale for such future engineering attempts in two distinct ways: (1) a CoP in surgery cannot simply be created by regulatory agencies, rather they need to be supported in a way to evolve naturally, and (2) when the concept of CoPs is co-opted by governing bodies, it does not necessarily capture the power and potential of situated learning. To ensure CoP sustainability and effectiveness, we suggest that both core and peripheral members need to be more directly involved at the inception of the COP in terms of design, organization, implementation and ongoing management.

Cost Effective Development of Usable Systems: Gaps between HCI and Software Architecture Design

NASA Astrophysics Data System (ADS)

Folmer, Eelke; Bosch, Jan

A software product with poor usability is likely to fail in a highly competitive market; therefore software developing organizations are paying more and more attention to ensuring the usability of their software. Practice, however, shows that product quality (which includes usability among others) is not that high as it could be. Studies of software projects (Pressman, 2001) reveal that organizations spend a relative large amount of money and effort on fixing usability problems during late stage development. Some of these problems could have been detected and fixed much earlier. This avoidable rework leads to high costs and because during development different tradeoffs have to be made, for example between cost and quality leads to systems with less than optimal usability. This problem has been around for a couple of decades especially after software engineering (SE) and human computer interaction (HCI) became disciplines on their own. While both disciplines developed themselves, several gaps appeared which are now receiving increased attention in research literature. Major gaps of understanding, both between suggested practice and how software is actually developed in industry, but also between the best practices of each of the fields have been identified (Carrol et al, 1994, Bass et al, 2001, Folmer and Bosch, 2002). In addition, there are gaps in the fields of differing terminology, concepts, education, and methods.

Requirements as Goals and Commitments Too

NASA Astrophysics Data System (ADS)

Chopra, Amit K.; Mylopoulos, John; Dalpiaz, Fabiano; Giorgini, Paolo; Singh, Munindar P.

In traditional software engineering research and practice, requirements are classified either as functional or non-functional. Functional requirements consist of all functions the system-to-be ought to support, and have been modeled in terms of box-and-arrow diagrams in the spirit of SADT. Non-functional requirements include desired software qualities for the system-to-be and have been described either in natural language or in terms of metrics. This orthodoxy was challenged in the mid-90 s by a host of proposals that had a common theme: all requirements are initially stakeholder goals and ought to be elicited, modeled and analyzed as such. Through systematic processes, these goals can be refined into specifications of functions the system-to-be needs to deliver, while actions assigned to external actors need to be executed. This view is dominating Requirements Engineering (RE) research and is beginning to have an impact on RE practice. We propose a next step along this line of research, by adopting the concept of conditional commitment as companion concept to that of goal. Goals are intentional entities that capture the needs and wants of stakeholders. Commitments, on the other hand, are social concepts that define the willingness and capability of an actor A to fulfill a predicate ϕ for the benefit of actor B, provided B (in return) fulfills predicate ψ for the benefit of actor A. In our conceptualization, goals are mapped to collections of commitments rather than functions, qualities, or actor assignments. We motivate the importance of the concept of commitment for RE through examples and discussion. We also contrast our proposal with state-of-the-art requirements modeling and analysis frameworks, such as KAOS, MAP, i * and Tropos.

Hydrologic conditions and distribution of selected radiochemical and chemical constituents in water, Snake River Plain aquifer, Idaho National Engineering Laboratory, Idaho, 1989 through 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartholomay, R.C.; Orr, B.R.; Liszewski, M.J.

Radiochemical and chemical wastewater discharged since 1952 to infiltration ponds and disposal wells at the Idaho National Engineering Laboratory (INEL) has affected water quality in the Snake River Plain aquifer. The U.S. Geological Survey, in cooperation with the U.S. Department of Energy, maintains a continuous monitoring network at the INEL to determine hydrologic trends and to delineate the movement of radiochemical and chemical wastes in the aquifer. This report presents an analysis of water-level and water-quality data collected from the Snake River Plain aquifer during 1989-91. Water in the eastern Snake River Plain aquifer moves principally through fractures and interflowmore » zones in basalt, generally flows southwestward, and eventually discharges at springs along the Snake River. The aquifer is recharged principally from irrigation water, infiltration of streamflow, and ground-water inflow from adjoining mountain drainage basins. Water levels in wells throughout the INEL generally declined during 1989-91 due to drought. Detectable concentrations of radiochemical constituents in water samples from wells in the Snake River Plain aquifer at the INEL decreased or remained constant during 1989-91. Decreased concentrations are attributed to reduced rates of radioactive-waste disposal, sorption processes, radioactive decay, and changes in waste-disposal practices. Detectable concentrations of chemical constituents in water from the Snake River Plain aquifer at the INEL were variable during 1989-91. Sodium and chloride concentrations in the southern part of the INEL increased slightly during 1989-91 because of increased waste-disposal rates and a lack of recharge from the Big Lost River. Plumes of 1,1,1-trichloroethane have developed near the Idaho Chemical Processing Plant and the Radioactive Waste Management Complex as a result of waste disposal practices.« less

Breast-feeding and malocclusions: The quality and level of evidence on the Internet for the public.

PubMed

Doğramacı, Esma J; Peres, Marco Aurelio; Peres, Karen Glazer

2016-10-01

The authors sought to assess the quality of information on the Internet for laypeople regarding the effect of breast-feeding on malocclusions and to determine the levels of evidence of the articles cited to support the information. The first author (E.J.D.) entered a key word term, "breast-feeding and crooked teeth," and a natural language term, "does breast-feeding protect against crooked teeth," into 4 search engines. The author performed consecutive sampling of every Web site until 5 Web sites were identified that fulfilled the inclusion criteria per search engine, per search term, producing 40 Web sites for evaluation. The author assessed quality using the LIDA instrument and determined the levels of evidence of the cited articles according to the Joanna Briggs Institute Levels of Evidence. The author determined that the quality of the Web sites was moderate, represented by a median overall LIDA score of 73%. The author identified only 2 high-quality Web sites. Nearly one-half of the Web sites cited a combined total of 10 scientific articles to support their content, and these ranged from moderate to very low levels of evidence. The authors found the quality of freely available information on the Internet for laypeople about the protective effect of breast-feeding against malocclusions to be moderate and that the evidence base cited to support the content ranged from moderate to very low levels of evidence. Increasingly, patients are seeking health information online, although not all information is credible. Dental heath care practitioners should regularly review their practices' Web sites to ensure that they are accessible and that the content is usable, reliable, and up-to-date, particularly as new, higher-level evidence becomes available. Copyright © 2016 American Dental Association. Published by Elsevier Inc. All rights reserved.

33 CFR 236.1 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE WATER... QUALITY § 236.1 Purpose. This regulation provides guidance for including Environmental Quality (EQ) measures in Corps of Engineers water resource development plans. ...

Gender and teamwork: an analysis of professors' perspectives and practices

NASA Astrophysics Data System (ADS)

Beddoes, Kacey; Panther, Grace

2018-05-01

Teamwork is increasingly seen as an important component of engineering education programmes. Yet, prior research has shown that there are numerous ways in which teamwork is gendered, and can lead to negative experiences for women students. This article presents the first interview findings on professors' perspectives on gender and teamwork. Semi-structured interviews were conducted with 39 engineering professors to determine what and how they thought about gender in engineering and engineering education. For this article, the parts of the interviews about teamwork are analysed. We conclude that professors need tools to help them facilitate gender-inclusive teamwork, and those tools must address the beliefs that they already hold about teamwork. The findings raise questions about the adoption of evidence-based instructional practices and suggest current teamwork practices may exacerbate gender inequalities in engineering.

Increasing the Roles and Significance of Teachers in Policymaking for K-12 Engineering Education: Proceedings of a Convocation

ERIC Educational Resources Information Center

Olson, Steve

2017-01-01

Engineering is a small but growing part of K-12 education. Curricula that use the principles and practices of engineering are providing opportunities for elementary, middle, and high school students to design solutions to problems of immediate practical and societal importance. Professional development programs are showing teachers how to use…

Organizational Learning, Knowledge Management Practices and Firm's Performance: An Empirical Study of a Heavy Engineering Firm in India

ERIC Educational Resources Information Center

Jain, Ajay K.; Moreno, Ana

2015-01-01

Purpose: The study aims at investigating the impact of organizational learning (OL) on the firm's performance and knowledge management (KM) practices in a heavy engineering organization in India. Design/Methodology/Approach: The data were collected from 205 middle and senior executives working in the project engineering management division of a…

Perspective on Models in Theoretical and Practical Traditions of Knowledge: The Example of Otto Engine Animations

ERIC Educational Resources Information Center

Haglund, Jesper; Stromdahl, Helge

2012-01-01

Nineteen informants (n = 19) were asked to study and comment two computer animations of the Otto combustion engine. One animation was non-interactive and realistic in the sense of depicting a physical engine. The other animation was more idealised, interactive and synchronised with a dynamic PV-graph. The informants represented practical and…

PREFACE: 4th Global Conference on Materials Science and Engineering (CMSE 2015)

NASA Astrophysics Data System (ADS)

Ruda, H. E.; Khotsianovsky, A.

2015-12-01

IOP Conference Series: Materials Science and Engineering is publishing a volume of conference proceedings that contains a selection of papers presented at the 4th Global Conference on Materials Science and Engineering (CMSE 2015), which is an annual event that started in 2012. CMSE 2015, technically supported by the Institute of Applied Physics and Materials Engineering of University of Macau, organized by Wuhan Advance Materials Society, was successfully held at the University of Macau-new campus located on Hengqin Island from August 3rd-6th, 2015. It aims to bring together leading academic scientists, researchers and scholars to exchange and share their experience and research results on all aspects of Materials Science and Engineering, and to discuss the practical challenges encountered and the solutions adopted. Macau, one of the two special administrative regions of the People's Republic of China, where East meets West, turned out to be an ideal meeting place for domestic and overseas participants of this annual international conference. The conference program included keynote presentations, special sessions, oral and poster contributions. From several hundred submissions, 52 of the most promising and mainstream, IOP-relevant, contributions were included in this volume. The submissions present original ideas or results of general significance, supported by clear reasoning, compelling evidence and methods, theories and practices relevant to the research. The authors state clearly the problems and the significance of their research to theory and practice. Being a successful conference, this event gathered more than 200 qualified and high-level researchers and experts from over 40 countries, including 10 keynote speakers from 6 countries, which created a good platform for worldwide researchers and engineers to enjoy the academic communication. Taking advantage of this opportunity, we would like to thank all participants of this conference, and particularly the authors of all accepted papers for their high quality and fruitful contributions. Special thanks are due to all reviewers for their careful critical reading of the manuscripts and useful comments and suggestions. We do hope that this volume will be beneficial for readers to their future research endeavours and careers. We also gratefully acknowledge tremendous efforts and dedication of many individuals, especially CMSE Conference Secretary Ms. Liu Qin, Editor Anete Ashton and all the Editorial Board members in IOP Publishing for their support in producing the proceedings of this event. Guest Editors: Prof. Harry E. Ruda University of Toronto, Canada Dr. Alexander Khotsianovsky Pisarenko Institute of Problems of Strength of the National Academy of Sciences of Ukraine, Ukraine

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 53: From student to entry-level professional: Examining the technical communications practices of early career-stage US aerospace engineers and scientists

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Holloway, Karen; Barclay, Rebecca O.; Kennedy, John M.

1995-01-01

Studies indicate that communications and information-related activities take up a substantial portion of an engineer's work week; therefore, effective communications and information-use skills are one of the key engineering competencies that early career-stage aerospace engineers and scientists must possess to be successful. Feedback from industry rates communications and information-use skills high in terms of their importance to engineering practice; however, this same feedback rates the communications and information-use skills of early career-stage engineers low. To gather adequate and generalizable data about the communications and information-related activities of entry-level aerospace engineers and scientists, we surveyed 264 members of the AIAA who have no more than 1-5 years of aerospace engineering work experience. To learn more about the concomitant communications norms, we compared the results of this study with data (1,673 responses) we collected from student members of the AIAA and with data (341 responses) we collected from a study of aerospace engineering professionals. In this paper, we report selected results from these studies that focused on the communications practices and information-related activities of early career-stage U.S. aerospace engineers and scientists in the workplace.

Engineering and Design: Chemical Data Quality Management for Hazardous, Toxic, Radioactive Waste Remedial Activities

DTIC Science & Technology

This regulation prescribes Chemical Data Quality Management (CDQM) responsibilities and procedures for projects involving hazardous, toxic and/or radioactive waste (HTRW) materials. Its purpose is to assure that the analytical data meet project data quality objectives. This is the umbrella regulation that defines CDQM activities and integrates all of the other U.S. Army Corps of Engineers (USACE) guidance on environmental data quality management .

Formalization of the engineering science discipline - knowledge engineering

NASA Astrophysics Data System (ADS)

Peng, Xiao

Knowledge is the most precious ingredient facilitating aerospace engineering research and product development activities. Currently, the most common knowledge retention methods are paper-based documents, such as reports, books and journals. However, those media have innate weaknesses. For example, four generations of flying wing aircraft (Horten, Northrop XB-35/YB-49, Boeing BWB and many others) were mostly developed in isolation. The subsequent engineers were not aware of the previous developments, because these projects were documented such which prevented the next generation of engineers to benefit from the previous lessons learned. In this manner, inefficient knowledge retention methods have become a primary obstacle for knowledge transfer from the experienced to the next generation of engineers. In addition, the quality of knowledge itself is a vital criterion; thus, an accurate measure of the quality of 'knowledge' is required. Although qualitative knowledge evaluation criteria have been researched in other disciplines, such as the AAA criterion by Ernest Sosa stemming from the field of philosophy, a quantitative knowledge evaluation criterion needs to be developed which is capable to numerically determine the qualities of knowledge for aerospace engineering research and product development activities. To provide engineers with a high-quality knowledge management tool, the engineering science discipline Knowledge Engineering has been formalized to systematically address knowledge retention issues. This research undertaking formalizes Knowledge Engineering as follows: 1. Categorize knowledge according to its formats and representations for the first time, which serves as the foundation for the subsequent knowledge management function development. 2. Develop an efficiency evaluation criterion for knowledge management by analyzing the characteristics of both knowledge and the parties involved in the knowledge management processes. 3. Propose and develop an innovative Knowledge-Based System (KBS), AVD KBS, forming a systematic approach facilitating knowledge management. 4. Demonstrate the efficiency advantages of AVDKBS over traditional knowledge management methods via selected design case studies. This research formalizes, for the first time, Knowledge Engineering as a distinct discipline by delivering a robust and high-quality knowledge management and process tool, AVDKBS. Formalizing knowledge proves to significantly impact the effectiveness of aerospace knowledge retention and utilization.

State of the art and future needs in S.I. engine combustion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maly, R.R.

1994-12-31

The paper reviews, in short, the state-of-the-art in SI engine combustion by addressing its main features: mixture formation, ignition, homogeneous combustion, pollutant formation, knock, and engine modeling. Necessary links between fundamental and practical work are clarified and discussed along with advanced diagnostics and simulation tools. The needs for further work are identified, the most important one being integration of all fundamental and practical resources to meet R and D requirements for future engines.

A Stirling engine for use with lower quality fuels

NASA Astrophysics Data System (ADS)

Paul, Christopher J.

There is increasing interest in using renewable fuels from biomass or alternative fuels such as municipal waste to reduce the need for fossil based fuels. Due to the lower heating values and higher levels of impurities, small scale electricity generation is more problematic. Currently, there are not many technologically mature options for small scale electricity generation using lower quality fuels. Even though there are few manufacturers of Stirling engines, the history of their development for two centuries offers significant guidance in developing a viable small scale generator set using lower quality fuels. The history, development, and modeling of Stirling engines were reviewed to identify possible model and engine configurations. A Stirling engine model based on the finite volume, ideal adiabatic model was developed. Flow dissipation losses are shown to need correcting as they increase significantly at low mean engine pressure and high engine speed. The complete engine including external components was developed. A simple yet effective method of evaluating the external heat transfer to the Stirling engine was created that can be used with any second order Stirling engine model. A derivative of the General Motors Ground Power Unit 3 was designed. By significantly increasing heater, cooler and regenerator size at the expense of increased dead volume, and adding a combustion gas recirculation, a generator set with good efficiency was designed.

Solar Access to Public Capital (SAPC) Working Group: Best Practices in PV System Installation; Version 1.0, March 2015; Period of Performance, October 2014 - September 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doyle, C.; Truitt, A.; Inda, D.

The following Photovoltaics Installation Best Practices Guide is one of several work products developed by the Solar Access to Public Capital (SAPC) working group, which works to open capital market investment. SAPC membership includes over 450 leading solar developers, financiers and capital managers, law firms, rating agencies, accounting and engineering firms, and other stakeholders engaged in solar asset deployment. SAPC activities are directed toward foundational elements necessary to pool project cash flows into tradable securities: standardization of power purchase and lease contracts for residential and commercial end customers; development of performance and credit data sets to facilitate investor due diligencemore » activities; comprehension of risk perceived by rating agencies; and the development of best practice guides for PV system installation and operations and maintenance (O&M) in order to encourage high-quality system deployment and operation that may improve lifetime project performance and energy production. This PV Installation Best Practices Guide was developed through the SAPC Installation Best Practices subcommittee, a subgroup of SAPC comprised of a wide array of solar industry leaders in numerous fields of practice. The guide was developed over roughly one year and eight months of direct engagement by the subcommittee and two working group comment periods.« less

Determining the market value of high-rise residential buildings based on evaluation of consumer properties

NASA Astrophysics Data System (ADS)

Kolobova, Svetlana

2018-03-01

As you know, high-rise construction is an indicator of the practical implementation of advanced innovative technologies in the construction industry of the country. High-rise building inevitably comes to the big cities, in connection with the shortage and value of land. The life cycle of any construction project, including high-rise buildings consists of chains: of engineering survey - design-construction-operation. In the process of operation of a tall building, decisions about major repairs or reconstruction of a building are made for decision-making on further use. This article describes methods of assessing the consumer quality of high-rise residential buildings and the establishment of prices based on consumer characteristics of a tall residential building. It is proposed to assess the premises under their quality characteristics. The study was conducted to establish the influence of individual, comprehensive and integral indicators of comparable quality for effective quality living spaces. Simultaneously, there was established a relationship of quality with the consumer cost of housing, ultimately with the potential needs of owners, tenants of the home, lessor dwelling, or buyers of residential properties and other participants in the residential real estate market. This relationship further creates consumer requirements to quality standard of premises at a certain stage of socio-economic development.

30 CFR 816.49 - Impoundments.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., prudent, engineering practices and any design criteria established by the regulatory authority. The... surrounding landowners for agricultural, industrial, recreational, or domestic uses. (6) The impoundment will... safely removed in accordance with current, prudent, engineering practices. Such an impoundment shall be...

30 CFR 816.49 - Impoundments.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., prudent, engineering practices and any design criteria established by the regulatory authority. The... surrounding landowners for agricultural, industrial, recreational, or domestic uses. (6) The impoundment will... safely removed in accordance with current, prudent, engineering practices. Such an impoundment shall be...

30 CFR 816.49 - Impoundments.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., prudent, engineering practices and any design criteria established by the regulatory authority. The... surrounding landowners for agricultural, industrial, recreational, or domestic uses. (6) The impoundment will... safely removed in accordance with current, prudent, engineering practices. Such an impoundment shall be...

30 CFR 816.49 - Impoundments.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., prudent, engineering practices and any design criteria established by the regulatory authority. The... surrounding landowners for agricultural, industrial, recreational, or domestic uses. (6) The impoundment will... safely removed in accordance with current, prudent, engineering practices. Such an impoundment shall be...

30 CFR 816.49 - Impoundments.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., prudent, engineering practices and any design criteria established by the regulatory authority. The... surrounding landowners for agricultural, industrial, recreational, or domestic uses. (6) The impoundment will... safely removed in accordance with current, prudent, engineering practices. Such an impoundment shall be...

7 CFR 2003.22 - Functional organization of RUS.

Code of Federal Regulations, 2010 CFR

2010-01-01

... engineering practices and specifications. (ii) Power Supply Division. Headed by a division director, this... office develops engineering practices, policies, and technical data related to borrowers' telecommunications systems; and evaluates the application of new communications network technology, including...

7 CFR 2003.22 - Functional organization of RUS.

Code of Federal Regulations, 2014 CFR

2014-01-01

... engineering practices and specifications. (ii) Power Supply Division. Headed by a division director, this... office develops engineering practices, policies, and technical data related to borrowers' telecommunications systems; and evaluates the application of new communications network technology, including...

7 CFR 2003.22 - Functional organization of RUS.

Code of Federal Regulations, 2011 CFR

2011-01-01

... engineering practices and specifications. (ii) Power Supply Division. Headed by a division director, this... office develops engineering practices, policies, and technical data related to borrowers' telecommunications systems; and evaluates the application of new communications network technology, including...

7 CFR 2003.22 - Functional organization of RUS.

Code of Federal Regulations, 2013 CFR

2013-01-01

... engineering practices and specifications. (ii) Power Supply Division. Headed by a division director, this... office develops engineering practices, policies, and technical data related to borrowers' telecommunications systems; and evaluates the application of new communications network technology, including...

7 CFR 2003.22 - Functional organization of RUS.

Code of Federal Regulations, 2012 CFR

2012-01-01

... engineering practices and specifications. (ii) Power Supply Division. Headed by a division director, this... office develops engineering practices, policies, and technical data related to borrowers' telecommunications systems; and evaluates the application of new communications network technology, including...

Design and Control of Chemical Grouting : Volume 3 - Engineering Practice

DOT National Transportation Integrated Search

1983-04-01

Recent improvements in the engineering practice of chemical grouting have provided increased confidence in this method of ground modification. Designers can significantly improve the success of chemical grouting by defining their grouting program obj...

Effect of Cetane Improver on Autoignition Characteristics of Low Cetane Sasol IPK Using Ignition Quality Tester (IQT)

DTIC Science & Technology

2013-10-13

Part IV”. SAE Technical Paper. 2001-01-3527. (2001). DOI: 10.4271/2001-01-3527. [21] International Standard, “ Diesel engines ------ Calibrating ... diesel engines. The ignition quality of a fuel is rated by its cetane number (CN) measured in a Cooperative Fuel Research (CFR) engine according to...measure the DCN of fuels for diesel engines. Also, DCN is considered as one of the critical properties in the investigation of surrogates for

A triangular approach to integrate research, education and practice in higher engineering education

NASA Astrophysics Data System (ADS)

Heikkinen, Eetu-Pekka; Jaako, Juha; Hiltunen, Jukka

2017-11-01

Separate approaches in engineering education, research and practice are not very useful when preparing students for working life; instead, integration of education, research and industrial practices is needed. A triangular approach (TA) as a method to accomplish this integration and as a method to provide students with integrated expertise is proposed. The results from the application of TA, both at the course and programme level, indicate that the approach is suitable for developing engineering education. The student pass rate for courses where TA has been used has been higher than for previous approaches, and the student feedback has been very positive. Although TA aims to take both theoretical and practical aspects of engineering as well as research and education into account, the approach concentrates mainly on activities and therefore leaves the goals of these activities as well as the values behind these goals uncovered.

Dynamic Environmental Qualification Techniques.

DTIC Science & Technology

1981-12-01

environments peculiar to military operations and requirements. numerous dynamic qualification test methods have been established. It was the purpose...requires the achievement of the highest practicable degree in the standard- ization of items, materials and engineering practices within the...standard is described as "A document that established engineering and technical requirements for processes, pro’cedures, practices and methods that have

The Fall and Rise of Experiential Construction and Engineering Education: Decoupling and Recoupling Practice and Theory

ERIC Educational Resources Information Center

Forster, Alan Mark; Pilcher, Nick; Tennant, Stuart; Murray, Mike; Craig, Nigel; Copping, Alex

2017-01-01

From the mid-20th C., construction and engineering pedagogy and curricula have moved from long-held traditional experiential apprenticeship approaches to one ostensibly decoupling practice and theory. This paper traces this decoupling and explores modern-day opportunities and challenges for recoupling university education with industry practice.…

40 CFR 52.1126 - Control strategy: Sulfur oxides.

Code of Federal Regulations, 2012 CFR

2012-07-01

... granted by the Massachusetts Department of Environmental Quality Engineering.) Massachusetts Mutual Life... stack). Central Massachusetts APCD Borden, Inc., Chemical Division, Leominster (conditioned upon first... Department of Environmental Quality Engineering.). Gardner State Hospital, Gardner. Grafton State Hospital...

40 CFR 52.1126 - Control strategy: Sulfur oxides.

Code of Federal Regulations, 2010 CFR

2010-07-01

... granted by the Massachusetts Department of Environmental Quality Engineering.) Massachusetts Mutual Life... stack). Central Massachusetts APCD Borden, Inc., Chemical Division, Leominster (conditioned upon first... Department of Environmental Quality Engineering.). Gardner State Hospital, Gardner. Grafton State Hospital...

40 CFR 52.1126 - Control strategy: Sulfur oxides.

Code of Federal Regulations, 2011 CFR

2011-07-01

... granted by the Massachusetts Department of Environmental Quality Engineering.) Massachusetts Mutual Life... stack). Central Massachusetts APCD Borden, Inc., Chemical Division, Leominster (conditioned upon first... Department of Environmental Quality Engineering.). Gardner State Hospital, Gardner. Grafton State Hospital...

Space Station Freedom - Configuration management approach to supporting concurrent engineering and total quality management. [for NASA Space Station Freedom Program

NASA Technical Reports Server (NTRS)

Gavert, Raymond B.

1990-01-01

Some experiences of NASA configuration management in providing concurrent engineering support to the Space Station Freedom program for the achievement of life cycle benefits and total quality are discussed. Three change decision experiences involving tracing requirements and automated information systems of the electrical power system are described. The potential benefits of concurrent engineering and total quality management include improved operational effectiveness, reduced logistics and support requirements, prevention of schedule slippages, and life cycle cost savings. It is shown how configuration management can influence the benefits attained through disciplined approaches and innovations that compel consideration of all the technical elements of engineering and quality factors that apply to the program development, transition to operations and in operations. Configuration management experiences involving the Space Station program's tiered management structure, the work package contractors, international partners, and the participating NASA centers are discussed.

76 FR 17368 - Approval and Promulgation of Air Quality Implementation Plans; Louisiana; Determination of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-29

... failed to attain the 1-hour ozone standard by their attainment date. South Coast Air Quality Management... rationale for this action? \\3\\ As a result of the court decision in South Coast Air Quality Management.../MMBtu. Stationary Internal Combustion Engines: Lean-burn engines > 150 to 320 Hp 4 g/Hp-hr. Rich-burn...

LABORATORY AND FIELD AUDITS AS PART OF THE EPA (ENVIRONMENTAL PROTECTION AGENCY) HAZARDOUS WASTE ENGINEERING RESEARCH LABORATORY (HWERL) QUALITY ASSURANCE PROGRAM

EPA Science Inventory

Audits are an important and integral part of the EPA Hazardous Waste Engineering Research Laboratory (HWERL) Quality Assurance (QA) Program. As part of the overall QA program, audits are used to determine contractor compliance with quality assurance plans and to assess the overal...

Interdisciplinary multisensory fusion: design lessons from professional architects

NASA Astrophysics Data System (ADS)

Geiger, Ray W.; Snell, J. T.

1992-11-01

Psychocybernetic systems engineering design conceptualization is mimicking the evolutionary path of habitable environmental design and the professional practice of building architecture, construction, and facilities management. Human efficacy for innovation in architectural design has always reflected more the projected perceptual vision of the designer visa vis the hierarchical spirit of the design process. In pursuing better ways to build and/or design things, we have found surprising success in exploring certain more esoteric applications. One of those applications is the vision of an artistic approach in/and around creative problem solving. Our evaluation in research into vision and visual systems associated with environmental design and human factors has led us to discover very specific connections between the human spirit and quality design. We would like to share those very qualitative and quantitative parameters of engineering design, particularly as it relates to multi-faceted and interdisciplinary design practice. Discussion will cover areas of cognitive ergonomics, natural modeling sources, and an open architectural process of means and goal satisfaction, qualified by natural repetition, gradation, rhythm, contrast, balance, and integrity of process. One hypothesis is that the kinematic simulation of perceived connections between hard and soft sciences, centering on the life sciences and life in general, has become a very effective foundation for design theory and application.

Relative importance of professional practice and engineering management competencies

NASA Astrophysics Data System (ADS)

Pons, Dirk

2016-09-01

Problem: The professional practice of engineering always involves engineering management, but it is difficult to know what specifically to include in the undergraduate curriculum. Approach: The population of New Zealand practising engineers was surveyed to determine the importance they placed on specific professional practice and engineering management competencies. Findings: Results show that communication and project planning were the two most important topics, followed by others as identified. The context in which practitioners use communication skills was found to be primarily with project management, with secondary contexts identified. The necessity for engineers to develop the ability to use multiple soft skills in an integrative manner is strongly supported by the data. Originality: This paper is one of only a few large-scale surveys of practising engineers to have explored the soft skill attributes. It makes a didactic contribution of providing a ranked list of topics which can be used for designing the curriculum and prioritising teaching effort, which has not previously been achieved. It yields the new insight that combinations of topics are sometimes more important than individual topics.

Antibiotics with anaerobic ammonium oxidation in urban wastewater treatment

NASA Astrophysics Data System (ADS)

Zhou, Ruipeng; Yang, Yuanming

2017-05-01

Biofilter process is based on biological oxidation process on the introduction of fast water filter design ideas generated by an integrated filtration, adsorption and biological role of aerobic wastewater treatment process various purification processes. By engineering example, we show that the process is an ideal sewage and industrial wastewater treatment process of low concentration. Anaerobic ammonia oxidation process because of its advantage of the high efficiency and low consumption, wastewater biological denitrification field has broad application prospects. The process in practical wastewater treatment at home and abroad has become a hot spot. In this paper, anammox bacteria habitats and species diversity, and anaerobic ammonium oxidation process in the form of diversity, and one and split the process operating conditions are compared, focusing on a review of the anammox process technology various types of wastewater laboratory research and engineering applications, including general water quality and pressure filtrate sludge digestion, landfill leachate, aquaculture wastewater, monosodium glutamate wastewater, wastewater, sewage, fecal sewage, waste water salinity wastewater characteristics, research progress and application of the obstacles. Finally, we summarize the anaerobic ammonium oxidation process potential problems during the processing of the actual waste water, and proposed future research focus on in-depth study of water quality anammox obstacle factor and its regulatory policy, and vigorously develop on this basis, and combined process optimization.

Investigating the quality of mental models deployed by undergraduate engineering students in creating explanations: The case of thermally activated phenomena

NASA Astrophysics Data System (ADS)

Fazio, Claudio; Battaglia, Onofrio Rosario; Di Paola, Benedetto

2013-12-01

This paper describes a method aimed at pointing out the quality of the mental models undergraduate engineering students deploy when asked to create explanations for phenomena or processes and/or use a given model in the same context. Student responses to a specially designed written questionnaire are quantitatively analyzed using researcher-generated categories of reasoning, based on the physics education research literature on student understanding of the relevant physics content. The use of statistical implicative analysis tools allows us to successfully identify clusters of students with respect to the similarity to the reasoning categories, defined as “practical or everyday,” “descriptive,” or “explicative.” Through the use of similarity and implication indexes our method also enables us to study the consistency in students’ deployment of mental models. A qualitative analysis of interviews conducted with students after they had completed the questionnaire is used to clarify some aspects which emerged from the quantitative analysis and validate the results obtained. Some implications of this joint use of quantitative and qualitative analysis for the design of a learning environment focused on the understanding of some aspects of the world at the level of causation and mechanisms of functioning are discussed.

Strategic deployment of CHO expression platforms to deliver Pfizer's Monoclonal Antibody Portfolio.

PubMed

Scarcelli, John J; Shang, Tanya Q; Iskra, Tim; Allen, Martin J; Zhang, Lin

2017-11-01

Development of stable cell lines for expression of large-molecule therapeutics represents a significant portion of the time and effort required to advance a molecule to enabling regulatory toxicology studies and clinical evaluation. Our development strategy employs two different approaches for cell line development based on the needs of a particular project: a random integration approach for projects where high-level expression is critical, and a site-specific integration approach for projects in which speed and reduced employee time spend is a necessity. Here we describe both our random integration and site-specific integration platforms and their applications in support of monoclonal antibody development and production. We also compare product quality attributes of monoclonal antibodies produced with a nonclonal cell pool or clonal cell lines derived from the two platforms. Our data suggests that material source (pools vs. clones) does not significantly alter the examined product quality attributes. Our current practice is to leverage this observation with our site-specific integration platform, where material generated from cell pools is used for an early molecular assessment of a given candidate to make informed decisions around development strategy. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1463-1467, 2017. © 2017 American Institute of Chemical Engineers.

Directions for combustion engine aerosol measurement in the 21st century.

PubMed

Maricq, M Matti; Maldonado, Hector

2010-10-01

The Coordinating Research Council convened two Real-Time PM Measurement Workshops in December 2008 and March 2009 to take an intensive look at the current status and future directions of combustion aerosol measurement. The purpose was to examine the implications of parallel rapid developments over the past decade in ambient aerosol science, engine aftertreatment technology, and aerosol measurement methodology, which provide benefits and challenges to the stakeholders in air quality management. The workshops were organized into sessions targeting key issues in ambient and source combustion particulate matter (PM). These include (1) metrics to characterize and quantify PM, (2) the need to reconcile ambient and source measurements, (3) the role of atmospheric transformations on modeling emissions and exposures, (4) the impact of sampling conditions on PM measurement, and (5) the potential benefits of novel PM instrumentation. This paper distills the material presented by subject experts and the insights derived from the in-depth discussions that formed the core of each session. The paper's objectives are to identify areas of consensus that allow wider practical application of the past decade's advances in combustion aerosol measurement to improve emissions and air quality modeling, develop emissions reduction strategies, and to recommend directions for progress on issues in which uncertainties remain.

Quantifying and modeling soil erosion and sediment export from construction sites in southern California

NASA Astrophysics Data System (ADS)

Wernet, A. K.; Beighley, R. E.

2006-12-01

Soil erosion is a power process that continuously alters the Earth's landscape. Human activities, such as construction and agricultural practices, and natural events, such as forest fires and landslides, disturb the landscape and intensify erosion processes leading to sudden increases in runoff sediment concentrations and degraded stream water quality. Understanding soil erosion and sediment transport processes is of great importance to researchers and practicing engineers, who routinely use models to predict soil erosion and sediment movement for varied land use and climate change scenarios. However, existing erosion models are limited in their applicability to constructions sites which have highly variable soil conditions (density, moisture, surface roughness, and best management practices) that change often in both space and time. The goal of this research is to improve the understanding, predictive capabilities and integration of treatment methodologies for controlling soil erosion and sediment export from construction sites. This research combines modeling with field monitoring and laboratory experiments to quantify: (a) spatial and temporal distribution of soil conditions on construction sites, (b) soil erosion due to event rainfall, and (c) potential offsite discharge of sediment with and without treatment practices. Field sites in southern California were selected to monitor the effects of common construction activities (ex., cut/fill, grading, foundations, roads) on soil conditions and sediment discharge. Laboratory experiments were performed in the Soil Erosion Research Laboratory (SERL), part of the Civil and Environmental Engineering department at San Diego State University, to quantify the impact of individual factors leading to sediment export. SERL experiments utilize a 3-m by 10-m tilting soil bed with soil depths up to 1 m, slopes ranging from 0 to 50 percent, and rainfall rates up to 150 mm/hr (6 in/hr). Preliminary modeling, field and laboratory results are presented.

Commercialising genetically engineered animal biomedical products.

PubMed

Sullivan, Eddie J; Pommer, Jerry; Robl, James M

2008-01-01

Research over the past two decades has increased the quality and quantity of tools available to produce genetically engineered animals. The number of potentially viable biomedical products from genetically engineered animals is increasing. However, moving from cutting-edge research to development and commercialisation of a biomedical product that is useful and wanted by the public has significant challenges. Even early stage development of genetically engineered animal applications requires consideration of many steps, including quality assurance and quality control, risk management, gap analysis, founder animal establishment, cell banking, sourcing of animals and animal-derived material, animal facilities, product collection facilities and processing facilities. These steps are complicated and expensive. Biomedical applications of genetically engineered animals have had some recent successes and many applications are well into development. As researchers consider applications for their findings, having a realistic understanding of the steps involved in the development and commercialisation of a product, produced in genetically engineered animals, is useful in determining the risk of genetic modification to the animal nu. the potential public benefit of the application.

Refinement and dissemination of a digital platform for sharing transportation education materials.

DOT National Transportation Integrated Search

2015-07-01

National agencies have called for more widespread adoption of best practices in engineering education. To facilitate this sharing of practices a : web-based system framework used by transportation engineering educators to share curricular materials a...

40 CFR 68.73 - Mechanical integrity.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 3 Prevention Program § 68.73 Mechanical integrity. (a... accepted good engineering practices. (3) The frequency of inspections and tests of process equipment shall be consistent with applicable manufacturers' recommendations and good engineering practices, and more...

40 CFR 68.73 - Mechanical integrity.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 3 Prevention Program § 68.73 Mechanical integrity. (a... accepted good engineering practices. (3) The frequency of inspections and tests of process equipment shall be consistent with applicable manufacturers' recommendations and good engineering practices, and more...

40 CFR 68.73 - Mechanical integrity.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 3 Prevention Program § 68.73 Mechanical integrity. (a... accepted good engineering practices. (3) The frequency of inspections and tests of process equipment shall be consistent with applicable manufacturers' recommendations and good engineering practices, and more...

40 CFR 68.73 - Mechanical integrity.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 3 Prevention Program § 68.73 Mechanical integrity. (a... accepted good engineering practices. (3) The frequency of inspections and tests of process equipment shall be consistent with applicable manufacturers' recommendations and good engineering practices, and more...

Software engineering standards and practices

NASA Technical Reports Server (NTRS)

Durachka, R. W.

1981-01-01

Guidelines are presented for the preparation of a software development plan. The various phases of a software development project are discussed throughout its life cycle including a general description of the software engineering standards and practices to be followed during each phase.

Sustainability by Design: A Reflection on the Suitability of Pedagogic Practice in Design and Engineering Courses in the Teaching of Sustainable Design

ERIC Educational Resources Information Center

Morris, Richard; Childs, Peter; Hamilton, Tom

2007-01-01

Courses in product design are offered within the United Kingdom at the University of Brighton and the University of Sussex and in both cases are run within engineering departments alongside traditional engineering courses. This paper outlines some of the intrinsic pedagogic practices that are employed by these, and other, design courses. It…

Defense Acquisitions: Addressing Incentives is Key to Further Reform Efforts

DTIC Science & Technology

2014-04-30

championed sound management practices, such as realistic cost estimating, prototyping, and systems engineering . While some progress has been made...other reforms have championed sound management practices, such as realistic cost estimating, prototyping, and systems engineering . DOD’s declining...principles from disciplines such as systems engineering , as well as lessons learned and past reforms. The body of work we have done on benchmarking

7th Annual CMMI Technology Conference Volume 3 Thursday Presentations

DTIC Science & Technology

2007-11-15

Inc. - US Corporate Research Effective Systems Engineering: What’s the Payoff for Program Performance?, NDIA Systems EngineeringsEffectiveness What’s...Inc. - US Corporate Research CMMI, Configuration Management, and Baseball – How to Score, Ms. Julie Schmarje, Raytheon Company Automated Systems for...Dr. Aldo Dagnino, ABB, Inc. US Corporate Research Systems Assurance – Practices Make Perfect – How Your Engineering and Management Practices Can Help

When Measurement Benefits the Measured

DTIC Science & Technology

2014-04-23

manage how you estimate your work and how you manage the quality of our work. Knowledge workers manage themselves with data. Software engineers...development, coaching, and training. His current research and development interests include data quality assessment and improvement, project...was an engineer and manager at Boeing in Seattle. He has a Masters Degree in Systems Engineering and is a senior member of IEEE. Mark is a certified

Developing Instruments to Assess and Compare the Quality of Engineering Education: The Case of China and Russia

ERIC Educational Resources Information Center

Kardanova, Elena; Loyalka, Prashant; Chirikov, Igor; Liu, Lydia; Li, Guirong; Wang, Huan; Enchikova, Ekaterina; Shi, Henry; Johnson, Natalie

2016-01-01

Relatively little is known about differences in the quality of engineering education within and across countries because of the lack of valid instruments that allow for the assessment and comparison of engineering students' skill gains. The purpose of our study is to develop and validate instruments that can be used to compare student skill gains…

Project-Based Manufacturing Engineering Practice at Ibaraki University and Its Outcomes

NASA Astrophysics Data System (ADS)

Yamasaki, Kazuhiko; Wang, Dong F.; Maekawa, Katsuhiro

The real world experience of manufacturing processes from an idea stage to a final product must be related to classroom lectures in mechanical engineering curriculum, including design, materials engineering, dynamics and control. Various challenges and difficulties encountered during the manufacturing engineering practice also let students recognize their creativity as well as what kinds of knowledge is missing. Awareness is the start of growth. In line with this principle we have carried out the mechanical engineering practice for 10 years. Some modifications toward “project-based practice” , however, have been made through manufacturing engineers’ real activities. Drawing and specification, process control, cost management, and role-sharing arrangement are stressed during the semester course. The present paper describes how it works and what is left to improve further, such as a refinement of themes and a coaching method for bringing out the hidden talent in students.

Hierarchy curriculum for practical skills training in optics and photonics

NASA Astrophysics Data System (ADS)

Zheng, XiaoDong; Wang, XiaoPing; Liu, Xu; Liu, XiangDong; Lin, YuanFang

2017-08-01

The employers in optical engineering fields hope to recruit students who are capable of applying optical principles to solve engineering problems and have strong laboratory skills. In Zhejiang University, a hierarchy curriculum for practical skill training has been constructed to satisfy this demand. This curriculum includes "Introductive practicum" for freshmen, "Opto-mechanical systems design", "Engineering training", "Electronic system design", "Student research training program (SRTP)", "National University Students' Optical-Science-Technology Competition game", and "Offcampus externship". Without cutting optical theory credit hours, this hierarchy curriculum provides a step-by-step solution to enhance students' practical skills. By following such a hierarchy curriculum, students can smoothly advance from a novice to a qualified professional expert in optics. They will be able to utilize optical engineering tools to design, build, analyze, improve, and test systems, and will be able to work effectively in teams to solve problems in engineering and design.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 54: The technical communications practices of engineering technology students: Results of the NASA/DOD Aerospace Knowledge Diffusion Research Project phase 3 student surveys

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; England, Mark; Barclay, Rebecca O.; Kennedy, John M.

1995-01-01

Engineering technology programs are characterized by their focus on application and practice, and by their approximately 50/50 mix of theory and laboratory experience. Engineering technology graduates are employed across the technological spectrum and are often found in areas that deal with application, implementation, and production. Yet we know very little about the communications practices and information-use skills of engineering technology students. In this paper, we report selected results of an exploratory study of engineering technology students enrolled in three U.S. institutions of higher education. Data are presented for the following topics: career goals and aspirations; the importance of, receipt of, and helpfulness of communications and information-use skills instruction; collaborative writing; use of libraries; and the use of electronic (computer) networks.

eHealth and IMIA's Strategic Planning Process - IMIA conference introductory address.

PubMed

Murray, Peter; Haux, Reinhold; Lorenzi, Nancy

2008-01-01

The International Medical Informatics Association (IMIA) is the only organization in health and biomedical informatics which is fully international in scope, bridging the academic, health practice, education, and health industry worlds through conferences, working groups, special interest groups and publications. Authored by the IMIA Interim Vice President for Strategic Planning Implementation and co-authored by the current IMIA President and the IMIA Past-President, the intention of this paper is to introduce IMIA's current strategic planning process and to set this process in relation to 'eHealth: Combining Health Telematics, Telemedicine, Biomedical Engineering and Bioinformatics to the Edge', the theme of this conference. From the viewpoint of an international organization such as IMIA, an eHealth strategy needs to be considered in a comprehensive way, including broadly stimulating high-quality health and biomedical informatics research and education, as well as providing support to bridging outcomes towards a new practice of health care in a changing world.

Helicity multiplexed broadband metasurface holograms.

PubMed

Wen, Dandan; Yue, Fuyong; Li, Guixin; Zheng, Guoxing; Chan, Kinlong; Chen, Shumei; Chen, Ming; Li, King Fai; Wong, Polis Wing Han; Cheah, Kok Wai; Pun, Edwin Yue Bun; Zhang, Shuang; Chen, Xianzhong

2015-09-10

Metasurfaces are engineered interfaces that contain a thin layer of plasmonic or dielectric nanostructures capable of manipulating light in a desirable manner. Advances in metasurfaces have led to various practical applications ranging from lensing to holography. Metasurface holograms that can be switched by the polarization state of incident light have been demonstrated for achieving polarization multiplexed functionalities. However, practical application of these devices has been limited by their capability for achieving high efficiency and high image quality. Here we experimentally demonstrate a helicity multiplexed metasurface hologram with high efficiency and good image fidelity over a broad range of frequencies. The metasurface hologram features the combination of two sets of hologram patterns operating with opposite incident helicities. Two symmetrically distributed off-axis images are interchangeable by controlling the helicity of the input light. The demonstrated helicity multiplexed metasurface hologram with its high performance opens avenues for future applications with functionality switchable optical devices.

Standardized development of computer software. Part 1: Methods

NASA Technical Reports Server (NTRS)

Tausworthe, R. C.

1976-01-01

This work is a two-volume set on standards for modern software engineering methodology. This volume presents a tutorial and practical guide to the efficient development of reliable computer software, a unified and coordinated discipline for design, coding, testing, documentation, and project organization and management. The aim of the monograph is to provide formal disciplines for increasing the probability of securing software that is characterized by high degrees of initial correctness, readability, and maintainability, and to promote practices which aid in the consistent and orderly development of a total software system within schedule and budgetary constraints. These disciplines are set forth as a set of rules to be applied during software development to drastically reduce the time traditionally spent in debugging, to increase documentation quality, to foster understandability among those who must come in contact with it, and to facilitate operations and alterations of the program as requirements on the program environment change.

EHR Safety: The Way Forward to Safe and Effective Systems

PubMed Central

Walker, James M.; Carayon, Pascale; Leveson, Nancy; Paulus, Ronald A.; Tooker, John; Chin, Homer; Bothe, Albert; Stewart, Walter F.

2008-01-01

Diverse stakeholders—clinicians, researchers, business leaders, policy makers, and the public—have good reason to believe that the effective use of electronic health care records (EHRs) is essential to meaningful advances in health care quality and patient safety. However, several reports have documented the potential of EHRs to contribute to health care system flaws and patient harm. As organizations (including small hospitals and physician practices) with limited resources for care-process transformation, human-factors engineering, software safety, and project management begin to use EHRs, the chance of EHR-associated harm may increase. The authors propose a coordinated set of steps to advance the practice and theory of safe EHR design, implementation, and continuous improvement. These include setting EHR implementation in the context of health care process improvement, building safety into the specification and design of EHRs, safety testing and reporting, and rapid communication of EHR-related safety flaws and incidents. PMID:18308981

Helicity multiplexed broadband metasurface holograms

PubMed Central

Wen, Dandan; Yue, Fuyong; Li, Guixin; Zheng, Guoxing; Chan, Kinlong; Chen, Shumei; Chen, Ming; Li, King Fai; Wong, Polis Wing Han; Cheah, Kok Wai; Yue Bun Pun, Edwin; Zhang, Shuang; Chen, Xianzhong

2015-01-01

Metasurfaces are engineered interfaces that contain a thin layer of plasmonic or dielectric nanostructures capable of manipulating light in a desirable manner. Advances in metasurfaces have led to various practical applications ranging from lensing to holography. Metasurface holograms that can be switched by the polarization state of incident light have been demonstrated for achieving polarization multiplexed functionalities. However, practical application of these devices has been limited by their capability for achieving high efficiency and high image quality. Here we experimentally demonstrate a helicity multiplexed metasurface hologram with high efficiency and good image fidelity over a broad range of frequencies. The metasurface hologram features the combination of two sets of hologram patterns operating with opposite incident helicities. Two symmetrically distributed off-axis images are interchangeable by controlling the helicity of the input light. The demonstrated helicity multiplexed metasurface hologram with its high performance opens avenues for future applications with functionality switchable optical devices. PMID:26354497

Bridging research and practice: community-researcher partnerships for replicating effective interventions.

PubMed

Rotheram-Borus, M J; Rebchook, G M; Kelly, J A; Adams, J; Neumann, M S

2000-01-01

Long-term collaborations among researchers, staff and volunteers in community-based agencies, staff in institutional settings, and health advocates present challenges. Each group has different missions, procedures, attributes, and rewards. This article reviews areas of potential conflict and suggests strategies for coping with these challenges. During the replication of five effective HIV prevention interventions, strategies for maintaining mutually beneficial collaborations included selecting agencies with infrastructures that could support research-based interventions; obtaining letters of understanding that clarified roles, responsibilities, and time frames; and setting training schedules with opportunities for observing, practicing, becoming invested in, and repeatedly implementing the intervention. The process of implementing interventions highlighted educating funders of research and public health services about (a) the costs of disseminating interventions, (b) the need for innovation to new modalities and theories for delivering effective interventions, and (c) adopting strategies of marketing research and quality engineering when designing interventions.

Using a Teaching Intervention and Calibrated Peer Review™ Diagnostics to Improve Visual Communication Skills.

PubMed

Saterbak, Ann; Moturu, Anoosha; Volz, Tracy

2018-03-01

Rice University's bioengineering department incorporates written, oral, and visual communication instruction into its undergraduate curriculum to aid student learning and to prepare students to communicate their knowledge and discoveries precisely and persuasively. In a tissue culture lab course, we used a self- and peer-review tool called Calibrated Peer Review™ (CPR) to diagnose student learning gaps in visual communication skills on a poster assignment. We then designed an active learning intervention that required students to practice the visual communication skills that needed improvement and used CPR to measure the changes. After the intervention, we observed that students performed significantly better in their ability to develop high quality graphs and tables that represent experimental data. Based on these outcomes, we conclude that guided task practice, collaborative learning, and calibrated peer review can be used to improve engineering students' visual communication skills.

Scientific and Engineering Practices in K-12 Classrooms: Understanding "A Framework for K-12 Science Education"

ERIC Educational Resources Information Center

Bybee, Rodger W.

2011-01-01

In this article, the author presents the science and engineering practices from the recently released "A Framework for K-12 Science Education: Practices, Crosscutting Concepts, and Core Ideas" (NRC 2011). The author recognizes the changes implied by the new framework, and eventually a new generation of science education standards will present new…

Relationships between evidence-based practice, quality improvement and clinical error experience of nurses in Korean hospitals.

PubMed

Hwang, Jee-In; Park, Hyeoun-Ae

2015-07-01

This study investigated individual and work-related factors associated with nurses' perceptions of evidence-based practice (EBP) and quality improvement (QI), and the relationships between evidence-based practice, quality improvement and clinical errors. Understanding the factors affecting evidence-based practice and quality improvement activities and their relationships with clinical errors is important for designing strategies to promote evidence-based practice, quality improvement and patient safety. A cross-sectional survey was conducted with 594 nurses in two Korean teaching hospitals using the evidence-based practice Questionnaire and quality improvement scale developed in this study. Four hundred and forty-three nurses (74.6%) returned the completed survey. Nurses' ages and educational levels were significantly associated with evidence-based practice scores whereas age and job position were associated with quality improvement scores. There were positive, moderate correlations between evidence-based practice and quality improvement scores. Nurses who had not made any clinical errors during the past 12 months had significantly higher quality improvement skills scores than those who had. The findings indicated the necessity of educational support regarding evidence-based practice and quality improvement for younger staff nurses who have no master degrees. Enhancing quality improvement skills may reduce clinical errors. Nurse managers should consider the characteristics of their staff when implementing educational and clinical strategies for evidence-based practice and quality improvement. © 2013 John Wiley & Sons Ltd.

Plant Metabolomics: An Indispensable System Biology Tool for Plant Science

PubMed Central

Hong, Jun; Yang, Litao; Zhang, Dabing; Shi, Jianxin

2016-01-01

As genomes of many plant species have been sequenced, demand for functional genomics has dramatically accelerated the improvement of other omics including metabolomics. Despite a large amount of metabolites still remaining to be identified, metabolomics has contributed significantly not only to the understanding of plant physiology and biology from the view of small chemical molecules that reflect the end point of biological activities, but also in past decades to the attempts to improve plant behavior under both normal and stressed conditions. Hereby, we summarize the current knowledge on the genetic and biochemical mechanisms underlying plant growth, development, and stress responses, focusing further on the contributions of metabolomics to practical applications in crop quality improvement and food safety assessment, as well as plant metabolic engineering. We also highlight the current challenges and future perspectives in this inspiring area, with the aim to stimulate further studies leading to better crop improvement of yield and quality. PMID:27258266

Plant Metabolomics: An Indispensable System Biology Tool for Plant Science.

PubMed

Hong, Jun; Yang, Litao; Zhang, Dabing; Shi, Jianxin

2016-06-01

As genomes of many plant species have been sequenced, demand for functional genomics has dramatically accelerated the improvement of other omics including metabolomics. Despite a large amount of metabolites still remaining to be identified, metabolomics has contributed significantly not only to the understanding of plant physiology and biology from the view of small chemical molecules that reflect the end point of biological activities, but also in past decades to the attempts to improve plant behavior under both normal and stressed conditions. Hereby, we summarize the current knowledge on the genetic and biochemical mechanisms underlying plant growth, development, and stress responses, focusing further on the contributions of metabolomics to practical applications in crop quality improvement and food safety assessment, as well as plant metabolic engineering. We also highlight the current challenges and future perspectives in this inspiring area, with the aim to stimulate further studies leading to better crop improvement of yield and quality.

Influence of Psychological Factors on Product Development. Lessons from Aerospace and other Industries

NASA Astrophysics Data System (ADS)

Kamata, E. S.

2002-10-01

Product development is a major determinant of quality and cost as companies throughout the world struggle to optimize product development processes. Engineering tasks are usually implicitly assumed to be a primarily technical activity, but in reality they feature numerous nontechnical factors as well. This book focuses on the interrelationships of social, technical, and organizational aspects of the product development process. Cases observed in industry and research laboratories are presented and interpreted based on the socio-technical system approach (Emery / Trist) of examining the reciprocal relationship between the technical and the social subsystems. This book is primarily intended for engineering and quality professionals who want to know the limitations of current methods used in product development, to examine the so-called soft factors by means of grounded studies of their effect on R&D performance, not only to acknowledge the influence of soft factors but to actively consider their potential to improve the work environment. Academic researchers of the topic will also find many references and material for advanced courses on project and quality management. In addition to numerous cases from the aerospace industry, its general solution concepts are generalizable to other industries in which the high degree of product complexity necessitates effective interaction among different disciplines. The historical evaluation is neither intended for introductory purposes nor to propose a return to the past, but as a survey of the relevant factors to be applied in present and future projects. The author holds a degree in Electronics Engineering from the Instituto Tecnológico de Aeronautica, Brazil, as well as a PhD in Administration Sciences from the Swiss Federal Institute of Technology in Zurich, Switzerland. He draws on profound academic research as well as a wealth of practical experience in avionics, telecommunications, systems control, and the space industry. His professional biography includes activities in development, quality of development, reliability, testability and university lecturing. He also holds a commercial pilot license. Link: http://www.wkap.nl/prod/b/1-4020-0807-4

Design and practice of a comprehensively functional integrated management information system for major construction

NASA Astrophysics Data System (ADS)

Liu, Yuling; Wang, Xiaoping; Zhu, Yuhui; Fei, Lanlan

2017-08-01

This paper introduces a Comprehensively Functional Integrated Management Information System designed for the Optical Engineering Major by the College of Optical Science and Engineering, Zhejiang University, which combines the functions of teaching, students learning, educational assessment and management. The system consists of 5 modules, major overview, online curriculum, experiment teaching management, graduation project management and teaching quality feedback. The major overview module introduces the development history, training program, curriculums and experiment syllabus and teaching achievements of optical engineering major in Zhejiang University. The Management Information System is convenient for students to learn in a mobile and personalized way. The online curriculum module makes it very easy for teachers to setup a website for new curriculums. On the website, teachers can help students on their problems about the curriculums in time and collect their homework online. The experiment teaching management module and the graduation project management module enables the students to fulfill their experiment process and graduation thesis under the help of their supervisors. Before students take an experiment in the lab, they must pass the pre-experiment quiz on the corresponding module. After the experiment, students need to submit the experiment report to the web server. Moreover, the module contains experiment process video recordings, which are very helpful to improve the effect of the experiment education. The management of the entire process of a student's graduation program, including the project selection, mid-term inspection, progress report of every two weeks, final thesis, et al, is completed by the graduation project management module. The teaching quality feedback module is not only helpful for teachers to know whether the education effect of curriculum is good or not, but also helpful for the administrators of the college to know whether the design of syllabus is reasonable or not. The Management Information System changes the management object from the education results to the entire education processes. And it improves the efficiency of the management. It provides an effective method to promote curriculum construction management by supervision and evaluation, which improves students' learning outcomes and the quality of curriculums. As a result, it promotes the quality system of education obviously.