Nutritional and hygienic quality of raw milk in the mid-northern region of Algeria: correlations and risk factors.

PubMed

Adjlane-Kaouche, Soumeya; Benhacine, Rafik; Ghozlane, Faiçal; Mati, Abderrahmane

2014-01-01

This paper aims to study the overall quality of raw milk in the mid-northern region of Algeria. The analysis results showed a decrease in the average temperature for the delivery of 1,54°C with P<0.001. However, no significant variation (P>0.05) was observed in almost all the physical and nutritional parameters studied (pH, fat content, and protein content) between M1 and M2. The average contamination by total mesophilic aerobic bacteria (TMAB), coliforms, yeasts, molds, and different pathogens in samples taken at M1 showed significant changes at M2. This was confirmed by the decrease of reduction time of methylene blue (RTMB), about 54%. The variation was described as follows: (P>0.05) for yeasts and (P<0.05) for molds in M1 and M2, (P<0.05) for TMAB in M1, and (P<0.001) for TC, FC, and TMAB in M2. The analysis for the detection of Salmonella spp. showed no contamination in all samples tested, while antibiotic residues were detected in 35% of milks delivered. In conclusion, several risk factors have been identified in this study, namely, the effect of the season and the distance between the farm and the dairy unit.

Nutritional and Hygienic Quality of Raw Milk in the Mid-Northern Region of Algeria: Correlations and Risk Factors

PubMed Central

Adjlane-Kaouche, Soumeya; Benhacine, Rafik; Ghozlane, Faiçal; Mati, Abderrahmane

2014-01-01

This paper aims to study the overall quality of raw milk in the mid-northern region of Algeria. The analysis results showed a decrease in the average temperature for the delivery of 1,54°C with P<0.001. However, no significant variation (P>0.05) was observed in almost all the physical and nutritional parameters studied (pH, fat content, and protein content) between M1 and M2. The average contamination by total mesophilic aerobic bacteria (TMAB), coliforms, yeasts, molds, and different pathogens in samples taken at M1 showed significant changes at M2. This was confirmed by the decrease of reduction time of methylene blue (RTMB), about 54%. The variation was described as follows: (P>0.05) for yeasts and (P<0.05) for molds in M1 and M2, (P<0.05) for TMAB in M1, and (P<0.001) for TC, FC, and TMAB in M2. The analysis for the detection of Salmonella spp. showed no contamination in all samples tested, while antibiotic residues were detected in 35% of milks delivered. In conclusion, several risk factors have been identified in this study, namely, the effect of the season and the distance between the farm and the dairy unit. PMID:25374932

Photonic crystal microchip laser

NASA Astrophysics Data System (ADS)

Gailevicius, D.; Koliadenko, V.; Purlys, V.; Peckus, M.; Taranenko, V.; Staliunas, K.

2017-02-01

The microchip lasers, being sources of coherent light, suffer from one serious drawback: low spatial quality of the beam, strongly reducing the brightness of emitted radiation. Attempts to improve the beam quality, such as pump-beam guiding, external feedback, either strongly reduce the emission power, or drastically increase the size and complexity of the lasers. Here we propose that specially designed photonic crystal in the cavity of a microchip laser, can significantly improve the beam quality. We experimentally show that a microchip laser, due to spatial filtering functionality of intracavity photonic crystal, improves the beam quality factor M2 reducing it by factor of 2, and thus increase the brightness of radiation by a factor of 4. This comprises a new kind of laser, the "photonic crystal microchip laser", a very compact and efficient light source emitting high spatial high brightness radiation.

Microcrystalline diamond cylindrical resonators with quality-factor up to 0.5 million

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saito, Daisuke; Yang, Chen; Lin, Liwei

2016-02-01

We demonstrate high quality-factor 1.5 mm diameter batch-fabricated microcrystalline diamond cylindrical resonators (CR) with quality-factors limited by thermoelastic damping (TED) and surface loss. Resonators were fabricated 2.6 and 5.3 μm thick in-situ boron-doped microcrystalline diamond films deposited using hot filament chemical vapor deposition. The quality-factor (Q) of as-fabricated CR's was found to increase with the resonator diameter and diamond thickness. Annealing the CRs at 700 °C in a nitrogen atmosphere led to a three-fold increase in Q, a result we attribute to thinning of the diamond layer via reaction with residual O{sub 2} in the annealing furnace. Post-anneal Q exceeding 0.5 million (528 000)more » was measured at the 19 kHz elliptical wineglass modes, producing a ring-down time of 8.9 s. A model for Q versus diamond thickness and resonance frequency is developed including the effects of TED and surface loss. Measured quality factors are shown to agree with the predictions of this model.« less

Paediatric cerebrovascular CT angiography-towards better image quality.

PubMed

Thust, Stefanie C; Chong, Wui Khean Kling; Gunny, Roxana; Mazumder, Asif; Poitelea, Marius; Welsh, Anna; Ederies, Ash; Mankad, Kshitij

2014-12-01

Paediatric cerebrovascular CT angiography (CTA) can be challenging to perform due to variable cardiovascular physiology between different age groups and the risk of movement artefact. This analysis aimed to determine what proportion of CTA at our institution was of diagnostic quality and identify technical factors which could be improved. a retrospective analysis of 20 cases was performed at a national paediatric neurovascular centre assessing image quality with a subjective scoring system and Hounsfield Unit (HU) measurements. Demographic data, contrast dose, flow rate and triggering times were recorded for each patient. Using a qualitative scoring system, 75% of studies were found to be of diagnostic quality (n=9 'good', n=6 'satisfactory') and 25% (n=5) were 'poor'. Those judged subjectively to be poor had arterial contrast density measured at less than 250 HU. Increased arterial opacification was achieved for cases performed with an increased flow rate (2.5-4 mL/s) and higher intravenous contrast dose (2 mL/kg). Triggering was found to be well timed in nine cases, early in four cases and late in seven cases. Of the scans triggered early, 75% were poor. Of the scans triggered late, less (29%) were poor. High flow rates (>2.5 mL/s) were a key factor for achieving high quality paediatric cerebrovascular CTA imaging. However, appropriate triggering by starting the scan immediately on contrast opacification of the monitoring vessel plays an important role and could maintain image quality when flow rates were lower. Early triggering appeared more detrimental than late.

Numerical analysis of the output waveguide design for 1.55 μm square microcavity lasers directly grown on GaAs substrates

NASA Astrophysics Data System (ADS)

Ma, Xing; Wang, Jun; Cheng, Zhuo; Yang, Zeyuan; Hu, Haiyang; Wang, Wei; Yin, Haiying; Huang, Yongqing; Ren, Xiaomin

2018-07-01

We report a structure design of 1.55 μm square microcavity lasers monolithically integrated on GaAs substrates. The mode characteristics of the microcavity lasers are numerically investigated by three-dimensional finite-difference time-domain method. The dependences of the high-quality factor modes on the side length of the microcavity, the width of the output waveguide and the etching depth are investigated in detail. The results demonstrate, for the microcavity structure with the side length of 12 μm, the output waveguide width of 1.0 μm and the etching depth of 3.55 μm, it is optimal to excite high-quality factor modes around wavelength of 1.55 μm. The mode wavelength and the mode quality factor are 1547.46 nm and 2416.28, respectively. The quality factor degrades rapidly with the waveguide width increasing, and increases with increasing etching depth.

Through the Lens of Culture: Quality of Life Among Latina Breast Cancer Survivors

PubMed Central

Graves, Kristi D.; Jensen, Roxanne E.; Cañar, Janet; Perret-Gentil, Monique; Leventhal, Kara-Grace; Gonzalez, Florencia; Caicedo, Larisa; Jandorf, Lina; Kelly, Scott; Mandelblatt, Jeanne

2012-01-01

BACKGROUND Latinas have lower quality of life than Caucasian cancer survivors but we know little about factors associated with quality of life in this growing population. METHODS Bilingual staff conducted interviews with a national cross-sectional sample of 264 Latina breast cancer survivors. Quality of life was measured using the Functional Assessment of Cancer Therapy-Breast (FACT-B). Regression models evaluated associations between culture, social and medical context and overall quality of life and its subdomains. RESULTS Latina survivors were 1-5 years post-diagnosis and reported a lower mean quality of life score compared to other published reports of non-Latina survivors (M=105; SD=19.4 on the FACT-B). Culturally-based feelings of breast cancer-related stigma and shame were consistently related to lower overall quality of life and lower well-being in each quality of life domain. Social and medical contextual factors were independently related to quality of life; together cultural, social and medical context factors uniquely accounted for 62% of the explained model variance of overall quality of life (Adjusted R2=0.53, P<.001). Similar relationships were seen for quality of life subdomains in which cultural, social and medical contextual variables independently contributed to the overall variance of each final model: physical well-being (Adjusted R2=0.23, P <.001), social well-being (Adjusted R2=0.51, P<.001), emotional well-being (Adjusted R2=0.28, P<.001), functional well-being (Adjusted R2=0.41, P<.001) and additional breast concerns (Adjusted R2=0.40, P<.001). CONCLUSIONS Efforts to improve Latinas’ survivorship experiences should consider cultural, social and medical contextual factors to close existing quality of life gaps between Latinas and other survivors. PMID:23085764

High-brightness 1.3 μm InAs/GaAs quantum dot tapered laser with high temperature stability.

PubMed

Cao, Yulian; Ji, Haiming; Xu, Pengfei; Gu, Yongxian; Ma, Wenquan; Yang, Tao

2012-10-01

We demonstrate high-brightness 1.3 μm tapered lasers with high temperature stability by using p-doped InAs/GaAs quantum dots (QDs) as the active region. It is found that the beam quality factor M(2) for the devices is almost unchanged as the light power and temperature increase. The almost constant M(2) results from the p-doped QD active region.

Meteorological and urban landscape factors on severe air pollution in Beijing.

PubMed

Han, Lijian; Zhou, Weiqi; Li, Weifeng; Meshesha, Derege T; Li, Li; Zheng, Mingqing

2015-07-01

Air pollution gained special attention with the rapid development in Beijing. In January 2013, Beijing experienced extreme air pollution, which was not well examined. We thus examine the magnitude of air quality in the particular month by applying the air quality index (AQI), which is based on the newly upgraded Chinese environmental standard. Our finding revealed that (1) air quality has distinct spatial heterogeneity and relatively better air quality was observed in the northwest while worse quality happened in the southeast part of the city; (2) the wind speed is the main determinant of air quality in the city-when wind speed is greater than 4 m/sec, air quality can be significantly improved; and (3) urban impervious surface makes a contribution to the severity of air pollution-that is, with an increase in the fraction of impervious surface in a given area, air pollution is more severe. The results from our study demonstrated the severe pollution in Beijing and its meteorological and landscape factors. Also, the results of this work suggest that very strict air quality management should be conducted when wind speed less than 4 m/sec, especially at places with a large fraction of urban impervious surface. Prevention of air pollution is rare among methods with controls on meteorological and urban landscape conditions. We present research that utilizes the latest air quality index (AQI) to compare air pollution with meteorological and landscape conditions. We found that wind is the major meteorological factor that determines the air quality. For a given wind speed greater than 4 m/sec, the air quality improved significantly. Urban impervious surface also contributes to the severe air pollution: that is, when the fraction of impervious surface increases, there is more severe air pollution. These results suggest that air quality management should be conducted when wind speed is less than 4 m/sec, especially at places with a larger fraction of urban impervious surface.

Copper Filtration and kVp: Effect on Entrance Skin Exposure.

PubMed

Barba, James; Culp, Melissa

2015-01-01

The selection of technical factors to produce an image is driven primarily by the patient, body part, and factors regarding the status of that patient or part. Analog receptor systems are restricted by the ranges of data they are able to record, as well as the quantity and quality of data required to record an image. Using digital receptors allows for a wider range of exposure factors because of the nature of the receptor systems and the data processing methods employed. Thus, factor selection can be more patient centered when using digital receptors to produce a radiograph. To explore the relationship between milliampere seconds (mAs), kilovoltage peak (kVp), and additional copper filtration with exposure indicators and entrance skin exposure (ESE) using both analog and digital receptors. Researchers conducted 2-tailed t-tests using Stata/IC version 11.2 software (StataCorp LP) to compare ESE from several trials using hip and knee phantoms. The analysis indicated that increasing kVp, adding 0.1 mm copper filtration, and correspondingly reducing mAs reduced ESE on a hip phantom by 64%, from 151 mR to 54.4 mR and reduced ESE on a knee phantom by 51%, from 27.2 mR to 13.4 mR. Radiology departments and radiologic technologists can consider these data when creating dose reduction protocols. The wider latitude range of digital radiography can be used to minimize patient exposure while still producing images of diagnostic quality within the acceptable exposure indicator range stated by the manufacturer.

Fabrication and characterization of Tm3+-Ho3+ co-doped tellurite glass microsphere lasers operating at ∼2.1 μm

NASA Astrophysics Data System (ADS)

Yang, Zhengsheng; Wu, Yuehao; Yang, Kun; Xu, Peipeng; Zhang, Wei; Dai, Shixun; Xu, Tiefeng

2017-10-01

We used a Tm3+-Ho3+ co-doped tellurite glass as the laser medium to build active microsphere laser resonators. A droplet method is implemented and hundreds of high quality microspheres can be fabricated simultaneously. Typical Quality factors (Q-factors) of microspheres fabricated in this work reach 106. Silica fiber tapers are used as the coupling mechanism and a commercial 808 nm laser diode is used as the pump source. Laser lines at ∼2.1 μm can be observed in the emission spectrum of these active microsphere resonators. Pump thresholds for generating single mode laser lines in a 59.52 μm diameter microsphere is measured to be 0.887 mW and as the pump power is increased to 1.413 mW, multi-mode laser lines can be generated. We also demonstrate microsphere lasers fabricated in this work can be thermally tuned with a temperature sensitivity of 32 pm/°C, implying these microspheres can be used as highly compact temperature sensors in various mid-infrared applications.

Paediatric cerebrovascular CT angiography—towards better image quality

PubMed Central

Thust, Stefanie C.; Chong, Wui Khean Kling; Gunny, Roxana; Mazumder, Asif; Poitelea, Marius; Welsh, Anna; Ederies, Ash

2014-01-01

Background Paediatric cerebrovascular CT angiography (CTA) can be challenging to perform due to variable cardiovascular physiology between different age groups and the risk of movement artefact. This analysis aimed to determine what proportion of CTA at our institution was of diagnostic quality and identify technical factors which could be improved. Materials and methods a retrospective analysis of 20 cases was performed at a national paediatric neurovascular centre assessing image quality with a subjective scoring system and Hounsfield Unit (HU) measurements. Demographic data, contrast dose, flow rate and triggering times were recorded for each patient. Results Using a qualitative scoring system, 75% of studies were found to be of diagnostic quality (n=9 ‘good’, n=6 ‘satisfactory’) and 25% (n=5) were ‘poor’. Those judged subjectively to be poor had arterial contrast density measured at less than 250 HU. Increased arterial opacification was achieved for cases performed with an increased flow rate (2.5-4 mL/s) and higher intravenous contrast dose (2 mL/kg). Triggering was found to be well timed in nine cases, early in four cases and late in seven cases. Of the scans triggered early, 75% were poor. Of the scans triggered late, less (29%) were poor. Conclusions High flow rates (>2.5 mL/s) were a key factor for achieving high quality paediatric cerebrovascular CTA imaging. However, appropriate triggering by starting the scan immediately on contrast opacification of the monitoring vessel plays an important role and could maintain image quality when flow rates were lower. Early triggering appeared more detrimental than late. PMID:25525579

High efficiency and good beam quality of electro-optic, cavity-dumped and double-end pumped Nd:YLF laser

NASA Astrophysics Data System (ADS)

Tang, X. X.; Fan, Z. W.; Qiu, J. S.; Lian, F. Q.; Zhang, X. L.

2012-06-01

In this paper, we describe a Nd:YLF laser based on high-speed RTP electro-optical cavity dumping technique. Two home-made 150 W fiber pump modules are used from both sides to pump Nd:YLF crystal. Coupling systems are the key elements in end-pumped solid-state lasers, the aberrations of which greatly affect the efficiency of the lasers. In order to get high efficient and good quality laser output, the optical software ZEMAX is used to design a four-piece coupling system. When the pumped energy is 32 mJ at the repetition rate of 1 Hz, the output energy is 6.5 mJ with 2.5 ns pulse width. When the pumped energy is 13.1 W at the repetition rate of 200 Hz, the output energy is 2.2 W with small M 2 factor where M {/x 2} is 1.04, and M {/y 2} is 1.05, and the light-light conversion efficiency is up to 16.8%.

Risk factors for precompetitive sleep behavior in elite female athletes.

PubMed

Silva, Maria-Raquel; Paiva, Teresa

2018-06-07

Sleep is of major importance for the athletes' short and long-term health, performance and recovery; however, published studies on athletes' sleep and even fewer before competition are scarce. This study evaluated the risk factors of sleep in young female gymnasts before an international competition. Sixty-seven rhythmic gymnasts (M=18.7,SD=2.9yrs.) of high performance (M=36.6,SD=7.6h/week) were evaluated regarding training and sport practice, body composition, sleep duration, daytime sleepiness by the Epworth Sleepiness Scale, sleep quality by the Pittsburgh Sleep Quality Index, precompetitive anxiety by the Sport Competition Anxiety Test form A, and detailed dietary intake just prior to a world competition. The majority of the participants (83.6%) presented reduced body fat levels (M=9.1,SD=2.1%) and low energy availability (M=31.5,SD=11.9kcal/kgFFM/day). They slept 8h10±1h30/night on weekdays and 8h40±00h40/night on weekends, 67% suffered from mild daytime sleepiness and 78% had a reduced sleep quality. Precompetitive anxiety was on average moderate (M=22.7,SD=3.2). The risk factors for short sleep duration were: 1.92 for a training volume>30hours/week (95%CI 0.84-4.39), 4.57 for menstruation (95%CI 1.17- 17.77), 6.62 for bedtime≥11:00PM (95%CI 1.74-25.10), 1.40 for BF<12%(95%CI 1.03- 1.92), 2.19 for FFM<30kg (95%IC 0.94-4.94), 2.37 for BMR<1100kcal/day (95%CI 1.06- 5.32), 1.90 for EEE≥700kcal (95%CI 0.92-3.93) and 3.17 for EA<45kcal/kgFFM/day (95%CI 0.84-6.59). Age, performance, sleep duration on weekdays and precompetitive stress were also predictors for a reduced sleep quality and/or abnormal daytime sleepiness. Age, training regime, menstruation, individual preferences for bedtime, body composition and energy were important predictors of gymnasts' precompetitive sleep with consequences upon their sleep duration, SQ and DS.

1030 nm high power polarization maintained fiber laser with narrow linewidth and near-diffraction-limited beam quality

NASA Astrophysics Data System (ADS)

Chu, Qiuhui; Zhao, Pengfei; Li, Chengyu; Wang, Bopeng; Lin, Honghuan; Guo, Chao; Liu, Yu; Jing, Feng; Tang, Chuanxiang

2018-03-01

A high power 1030 nm ytterbium-doped polarization maintained fiber laser with optimized parameters is presented in this paper. The master oscillator power amplifier system with counter-pumped amplifier is established. The output power is 900 W, along with a light-to-light efficiency of 64.2%. The amplified spontaneous emission suppression ratio of spectrum reaches to 40 dB with 3 dB linewidth of 0.14 nm. The polarization extinction ratio is 12 dB, and the beam quality factor is M2x=1.07, M2y=1.12. To the best of our knowledge, this is the first demonstration of 1030 nm high power fiber laser with narrow linewidth, near linear polarization, and neardiffraction-limited beam quality

Constituents of volatile organic compounds of evaporating essential oil

NASA Astrophysics Data System (ADS)

Chiu, Hua-Hsien; Chiang, Hsiu-Mei; Lo, Cho-Ching; Chen, Ching-Yen; Chiang, Hung-Lung

2009-12-01

Essential oils containing aromatic compounds can affect air quality when used indoors. Five typical and popular essential oils—rose, lemon, rosemary, tea tree and lavender—were investigated in terms of composition, thermal characteristics, volatile organic compound (VOC) constituents, and emission factors. The activation energy was 6.3-8.6 kcal mol -1, the reaction order was in the range of 0.6-0.8, and the frequency factor was 0.01-0.24 min -1. Toluene, 1,2,3-trimethylbenzene, 1,2,4-trimethylbenzene, n-undecane, p-diethylbenzene and m-diethylbenzene were the predominant VOCs of evaporating gas of essential oils at 40 °C. In addition, n-undecane, p-diethylbenzene, 1,2,4-trimethylbenzene, m-diethylbenzene, and 1,2,3-trimethylbenzene revealed high emission factors during the thermogravimetric (TG) analysis procedures. The sequence of the emission factors of 52 VOCs (137-173 mg g -1) was rose ≈ rosemary > tea tree ≈ lemon ≈ lavender. The VOC group fraction of the emission factor of aromatics was 62-78%, paraffins were 21-37% and olefins were less than 1.5% during the TG process. Some unhealthy VOCs such as benzene and toluene were measured at low temperature; they reveal the potential effect on indoor air quality and human health.

Improvement of insertion loss and quality factor of flexural plate-wave-based alpha-fetoprotein biosensor using groove-type reflective grating structures

NASA Astrophysics Data System (ADS)

Lin, Chang-Yu; Huang, I.-Yu; Lan, Je-Wei

2013-01-01

Conventional flexural plate-wave (FPW) transducers have limited applications in biomedical sensing due to their disadvantages such as high insertion loss and low quality factor. To overcome these shortcomings, we propose a FPW transducer on a low phase velocity insulator membrane (5-μm-thick SiO2) with a novel groove-type reflective grating structure design. Additionally, a cystamine self-assembly monolayer and a glutaraldehyde cross-linking layer are implemented on the backside of the FPW device to immobilize alpha-fetoprotein (AFP) antibody. A FPW-based AFP biosensor with low detection limit (5 ng/mL) can be achieved and used to measure the extreme low concentration of AFP antigen in human serum for early detection of hepatocellular carcinoma. The proposed FPW-based AFP biosensor also demonstrates a very high quality factor (206), low insertion loss (-40.854 dB), low operating frequency (6.388 MHz), and high sensing linearity (90.7%).

Sleep and eating behavior in adults at risk for type 2 diabetes.

PubMed

Kilkus, Jennifer M; Booth, John N; Bromley, Lindsay E; Darukhanavala, Amy P; Imperial, Jacqueline G; Penev, Plamen D

2012-01-01

Insufficient quantity and quality of sleep may modulate eating behavior, everyday physical activity, overall energy balance, and individual risk of obesity and type 2 diabetes. We examined the association of habitual sleep quantity and quality with the self-reported pattern of eating behavior in 53 healthy urban adults with parental history of type 2 diabetes (30 F/23 M; mean (s.d.) age: 27 (4) years; BMI: 23.9 (2.3) kg/m(2)) while taking into consideration the amount of their everyday physical activity. Participants completed 13 (3) days of sleep and physical activity monitoring by wrist actigraphy and waist accelerometry while following their usual lifestyle at home. Overnight laboratory polysomnography was used to screen for sleep disorders. Subjective sleep quality was measured with the Pittsburgh Sleep Quality Index. Eating behavior was assessed using the original 51-item and the revised 18-item version of the Three-Factor Eating Questionnaire including measures of cognitive restraint, disinhibition, hunger, and uncontrolled and emotional eating. In multivariable regression analyses adjusted for age, BMI, gender, race/ethnicity, level of education, habitual sleep time measured by wrist actigraphy and physical activity measured by waist accelerometry, lower subjective sleep quality was associated with increased hunger, more disinhibited, uncontrolled and emotional eating, and higher cognitive restraint. There was no significant association between the amount of sleep measured by wrist actigraphy and any of these eating behavior factors. Our findings indicate that small decrements in self-reported sleep quality can be a sensitive indicator for the presence of potentially problematic eating patterns in healthy urban adults with familial risk for type 2 diabetes.

The effect of thermal de-phasing on the beam quality of a high-power single-pass second harmonic generation

NASA Astrophysics Data System (ADS)

Sadat Hashemi, Somayeh; Ghavami Sabouri, Saeed; Khorsandi, Alireza

2018-04-01

We present a theoretical model in order to study the effect of a thermally loaded crystal on the quality of a second-harmonic (SH) beam generated in a high-power pumping regime. The model is provided based on using a particular structure of oven considered for MgO:PPsLT nonlinear crystal to compensate for the thermal de-phasing effect that as the pumping power reaches up to 50 W degrades the conversion efficiency and beam quality of the interacting beams. Hereupon, the quality of fundamental beam is involved in the modeling to investigate the final effect on the beam quality of generated SH beam. Beam quality evaluation is subsequently simulated using Hermite-Gaussian modal decomposition approach for a range of fundamental beam qualities varied from 1 to 3 and for different levels of input powers. To provide a meaningful comparison numerical simulation is correlated with real data deduced from a high-power SH generation (SHG) experimental device. It is found that when using the open-top oven scheme and fixing the fundamental M 2-factor at nearly 1, for a range of input powers changing from 15 to 30 W, the M 2-factor of SHG beam is degraded from 9% to 24%, respectively, confirming very good consistency with the reported experimental results.

Imaging the Parasinus Region with a Third-Generation Dual-Source CT and the Effect of Tin Filtration on Image Quality and Radiation Dose.

PubMed

Lell, M M; May, M S; Brand, M; Eller, A; Buder, T; Hofmann, E; Uder, M; Wuest, W

2015-07-01

CT is the imaging technique of choice in the evaluation of midface trauma or inflammatory disease. We performed a systematic evaluation of scan protocols to optimize image quality and radiation exposure on third-generation dual-source CT. CT protocols with different tube voltage (70-150 kV), current (25-300 reference mAs), prefiltration, pitch value, and rotation time were systematically evaluated. All images were reconstructed with iterative reconstruction (Advanced Modeled Iterative Reconstruction, level 2). To individually compare results with otherwise identical factors, we obtained all scans on a frozen human head. Conebeam CT was performed for image quality and dose comparison with multidetector row CT. Delineation of important anatomic structures and incidental pathologic conditions in the cadaver head was evaluated. One hundred kilovolts with tin prefiltration demonstrated the best compromise between dose and image quality. The most dose-effective combination for trauma imaging was Sn100 kV/250 mAs (volume CT dose index, 2.02 mGy), and for preoperative sinus surgery planning, Sn100 kV/150 mAs (volume CT dose index, 1.22 mGy). "Sn" indicates an additional prefiltration of the x-ray beam with a tin filter to constrict the energy spectrum. Exclusion of sinonasal disease was possible with even a lower dose by using Sn100 kV/25 mAs (volume CT dose index, 0.2 mGy). High image quality at very low dose levels can be achieved by using a Sn100-kV protocol with iterative reconstruction. The effective dose is comparable with that of conventional radiography, and the high image quality at even lower radiation exposure favors multidetector row CT over conebeam CT. © 2015 by American Journal of Neuroradiology.

Effects of continuing professional development on clinical performance

PubMed Central

Goulet, François; Hudon, Eveline; Gagnon, Robert; Gauvin, Eliane; Lemire, Francine; Arsenault, Isabelle

2013-01-01

Abstract Objective To evaluate the link between the quantity and quality of continuing professional development (CPD) activities completed by family physicians in Quebec and the quality of their practice. Design Retrospective analysis of data collected during professional inspection visits (PIVs). Setting Quebec. Participants Three groups were created from among Quebec family physicians who had been subject to PIVs (peer evaluation) by the Collège des médecins du Québec between 1998 and 2005. Group 1 was composed of physicians who were members of the College of Family Physicians of Canada, which requires participation in 250 hours of CPD in every 5-year cycle. Group 2 was composed of family physicians who were not members of the College of Family Physicians of Canada but who had declared at least 50 hours a year of CPD on their Collège des médecins du Québec annual notice of assessment for the same period. Group 3 was composed of family physicians who had declared fewer than 10 hours of CPD a year. Main outcome measures During the PIV, the following characteristics were examined: record keeping, quality and number of hours of CPD activities, and quality of professional practice based on 3 components— clinical investigation, accuracy of diagnosis, and appropriateness of treatment plan and follow-up. Results The factors associated with a high quality of practice were privileges in a hospital or local community health centre (institution) and a substantial number of accredited CPD hours (Mainpro-M1, Credit I, or Mainpro-C). The factors associated with a poor quality of practice were advanced age of the physician, absence of privileges in an institution (hospital or local community health centre), and participation in CPD activities that were more informal, such as reading and non-accredited activities (Mainpro-M2). Conclusion This study supports earlier research showing that CPD activities of sufficient quality and quantity are correlated with a high quality of professional practice by family physicians. PMID:23673591

Generation of Kerr combs centered at 4.5 μm in crystalline microresonators pumped with quantum-cascade lasers.

PubMed

Savchenkov, Anatoliy A; Ilchenko, Vladimir S; Di Teodoro, Fabio; Belden, Paul M; Lotshaw, William T; Matsko, Andrey B; Maleki, Lute

2015-08-01

We report on the generation of mid-infrared Kerr frequency combs in high-finesse CaF2 and MgF2 whispering-gallery-mode resonators pumped with continuous-wave room-temperature quantum cascade lasers. The combs were centered at 4.5 μm, the longest wavelength to date. A frequency comb wider than one half of an octave was demonstrated when approximately 20 mW of pump power was coupled to an MgF2 resonator characterized with quality factor exceeding 10(8).

High power broadband all fiber super-fluorescent source with linear polarization and near diffraction-limited beam quality.

PubMed

Ma, Pengfei; Huang, Long; Wang, Xiaolin; Zhou, Pu; Liu, Zejin

2016-01-25

In this manuscript, a high power broadband superfluorescent source (SFS) with linear polarization and near-diffraction-limited beam quality is achieved based on an ytterbium-doped (Yb-doped), all fiberized and polarization-maintained master oscillator power amplifier (MOPA) configuration. The MOPA structure generates a linearly polarized output power of 1427 W with a slope efficiency of 80% and a full width at half maximum (FWHM) of 11 nm, which is power scaled by an order of magnitude compared with the previously reported SFSs with linear polarization. In the experiment, both the polarization extinction ratio (PER) and beam quality (M(2) factor) are degraded little during the power scaling process. At maximal output power, the PER and M(2) factor are measured to be 19.1dB and 1.14, respectively. The root-mean-square (RMS) and peak-vale (PV) values of the power fluctuation at maximal output power are just 0.48% and within 3%, respectively. Further power scaling of the whole system is limited by the available pump sources. To the best of our knowledge, this is the first demonstration of kilowatt level broadband SFS with linear polarization and near-diffraction-limited beam quality.

Adoption and Usage of mHealth Technology on Quality and Experience of Care Provided by Frontline Workers: Observations From Rural India.

PubMed

Kaphle, Sangya; Chaturvedi, Sharad; Chaudhuri, Indrajit; Krishnan, Ram; Lesh, Neal

2015-05-28

mHealth apps are deployed with the aim of improving access, quality, and experience of health care. It is possible that any mHealth intervention can yield differential impacts for different types of users. Mediating and determining factors, including personal and socioeconomic factors, affect technology adoption, the way health workers leverage and use the technology, and subsequently the quality and experience of care they provide. To develop a framework to assess whether mHealth platforms affect the quality and experience of care provided by frontline workers, and whether these effects on quality and experience are different depending on the level of technology adoption and individual characteristics of the health worker. Literacy, education, age, and previous mobile experience are identified as individual factors that affect technology adoption and use, as well as factors that affect the quality and experience of care directly and via the technology. Formative research was conducted with 15 community health workers (CHWs) using CommCare, an mHealth app for maternal and newborn care, in Bihar, India. CHWs were first classified on the level of CommCare adoption using data from CommCareHQ and were then shadowed on home visits to evaluate their levels of technology proficiency, and the quality and experience of care provided. Regression techniques were employed to test the relationships. Out of all the CHWs, 2 of them refused to participate in the home visits, however, we did have information on their levels of technology adoption and background characteristics, which were included in the analysis as relevant. Level of technology adoption was important for both quality and experience of care. The quality score for high users of CommCare was higher by 33.4% (P=.04), on average, compared to low users of CommCare. Those who scored higher on CommCare proficiency also provided significantly higher quality and experience of care, where an additional point in CommCare proficiency score increased the quality score by around half a point (0.541, P=.07), and experience score by around a third of a point (0.308, P=.03). Age affected CommCare user type negatively, with an increase in age increasing the likelihood of belonging to a lower category of CommCare adoption (-0.105, P=.08). Other individual characteristics did not affect adoption or the predicted values estimating the relationship between adoption and quality and experience of care, although illiteracy was able to affect the relationship negatively. mHealth technology adoption by frontline workers can positively impact the quality and experience of care they provide. Individual characteristics, especially literacy and age, can be important elements affecting technology adoption and the way users leverage the technology for their work. Our formative study provides informed hypotheses and methods for further research.

Adoption and Usage of mHealth Technology on Quality and Experience of Care Provided by Frontline Workers: Observations From Rural India

PubMed Central

Chaturvedi, Sharad; Chaudhuri, Indrajit; Krishnan, Ram; Lesh, Neal

2015-01-01

Background mHealth apps are deployed with the aim of improving access, quality, and experience of health care. It is possible that any mHealth intervention can yield differential impacts for different types of users. Mediating and determining factors, including personal and socioeconomic factors, affect technology adoption, the way health workers leverage and use the technology, and subsequently the quality and experience of care they provide. Objective To develop a framework to assess whether mHealth platforms affect the quality and experience of care provided by frontline workers, and whether these effects on quality and experience are different depending on the level of technology adoption and individual characteristics of the health worker. Literacy, education, age, and previous mobile experience are identified as individual factors that affect technology adoption and use, as well as factors that affect the quality and experience of care directly and via the technology. Methods Formative research was conducted with 15 community health workers (CHWs) using CommCare, an mHealth app for maternal and newborn care, in Bihar, India. CHWs were first classified on the level of CommCare adoption using data from CommCareHQ and were then shadowed on home visits to evaluate their levels of technology proficiency, and the quality and experience of care provided. Regression techniques were employed to test the relationships. Out of all the CHWs, 2 of them refused to participate in the home visits, however, we did have information on their levels of technology adoption and background characteristics, which were included in the analysis as relevant. Results Level of technology adoption was important for both quality and experience of care. The quality score for high users of CommCare was higher by 33.4% (P=.04), on average, compared to low users of CommCare. Those who scored higher on CommCare proficiency also provided significantly higher quality and experience of care, where an additional point in CommCare proficiency score increased the quality score by around half a point (0.541, P=.07), and experience score by around a third of a point (0.308, P=.03). Age affected CommCare user type negatively, with an increase in age increasing the likelihood of belonging to a lower category of CommCare adoption (-0.105, P=.08). Other individual characteristics did not affect adoption or the predicted values estimating the relationship between adoption and quality and experience of care, although illiteracy was able to affect the relationship negatively. Conclusions mHealth technology adoption by frontline workers can positively impact the quality and experience of care they provide. Individual characteristics, especially literacy and age, can be important elements affecting technology adoption and the way users leverage the technology for their work. Our formative study provides informed hypotheses and methods for further research. PMID:26023001

Effect of excess body weight on quality of life and satisfaction with body image among middle-aged Lithuanian inhabitants of Kaunas city.

PubMed

Baceviciene, Migle; Reklaitiene, Regina; Tamosiūnas, Abdonas

2009-01-01

The aim of the study was to identify the effect of overweight, obesity, and conditions related to body weight on quality of life and to assess the relationship between body weight and satisfaction with body image between middle-aged Lithuanian inhabitants of Kaunas city. MATERIAL AND METHODS. A random sample of 1403 Kaunas men and women, aged 35-64 years and stratified by age and sex, was examined in 2001-2002. Response rate was 62.4%. Examination included physical measurements and information on risk factors related to lifestyle. Quality of life was assessed by World Health Organization Quality of Life 100 questionnaire. Multivariate analyses were performed to identify the effect of excess body weight and conditions linked to body weight on quality of life. RESULTS. Less than three-fourths (73%) of men and women had excess body weight (body mass index, > or =25.0 kg/m(2)). Obesity in a complex with other analyzed factors had a negative effect on men's quality of life in the independence domain as compared to ones with BMI of <25.0 kg/m(2) (OR=1.87; 95% CI=1.08-3.26). Obesity for women increased the odds of having worse quality of life in the psychological and independence domains. Mean scores of body image and appearance facet for men with normal body mass were 73.5, for overweigh ones 72.2, and for obese 66.8 (for women 69.9, 63.3, and 52.9, respectively; P=0.0001). CONCLUSIONS. Among women excess body weight was associated with impaired quality of life. Men with excess body weight reported better overall quality of life. Obese persons were less satisfied with their body image as compared to ones with normal body weight.

Prospective Measurement of Patient Exposure to Radiation During Pediatric Ureteroscopy

PubMed Central

Kokorowski, Paul J.; Chow, Jeanne S.; Strauss, Keith; Pennison, Melanie; Routh, Jonathan C.; Nelson, Caleb P.

2013-01-01

Objective Little data have been reported regarding radiation exposure during pediatric endourologic procedures, including ureteroscopy (URS). We sought to measure radiation exposure during pediatric URS and identify opportunities for exposure reduction. Methods We prospectively observed URS procedures as part of a quality improvement initiative. Pre-operative patient characteristics, operative factors, fluoroscopy settings and radiation exposure were recorded. Our outcomes were entrance skin dose (ESD, in mGy) and midline dose (MLD, in mGy). Specific modifiable factors were identified as targets for potential quality improvement. Results Direct observation was performed on 56 consecutive URS procedures. Mean patient age was 14.8 ± 3.8 years (range 7.4 to 19.2); 9 children were under age 12 years. Mean ESD was 46.4 ± 48 mGy. Mean MLD was 6.2 ± 5.0 mGy. The most important major determinant of radiation dose was total fluoroscopy time (mean 2.68 ± 1.8 min) followed by dose rate setting, child anterior-posterior (AP) diameter, and source to skin distance (all p<0.01). The analysis of factors affecting exposure levels found that the use of ureteral access sheaths (p=0.01) and retrograde pyelography (p=0.04) were significantly associated with fluoroscopy time. We also found that dose rate settings were higher than recommended in up to 43% of cases and ideal C-arm positioning could have reduced exposure 14% (up to 49% in some cases). Conclusions Children receive biologically significant radiation doses during URS procedures. Several modifiable factors contribute to dose and could be targeted in efforts to implement dose reduction strategies. PMID:22341275

Can smartphones measure momentary quality of life and participation? A proof of concept using experience sampling surveys with university students.

PubMed

Liddle, Jacki; Wishink, Anna; Springfield, Liz; Gustafsson, Louise; Ireland, David; Silburn, Peter

2017-08-01

Understanding quality of life and participation is a key aspect of occupational therapy research. The use of smartphones to deliver experience-sampling surveys may provide an accessible way to monitor these outcomes. This study used smartphone-based experience sampling methods (ESM) to investigate factors influencing momentary quality of life (mQOL) of university students. A convenience sample of students at an Australian university participated. Using a custom smartphone application, ESM surveys were sent six to eight times, every second day, over a week. Participants indicated their mQOL, occupational participation, occupational enjoyment, social context and location via surveys and provided demographic and health information in a single self-report questionnaire. The relationship between mQOL and variables was analysed at the survey level using logistic regression. Forty students completed 391 surveys. Higher mQOL was significantly related to participation in productive occupations (z = 3.48; P = 0.001), moderate (z = 4.00; P < 0.001) or high occupational enjoyment (z = 7.06; P < 0.001), being with someone (z = 2.15, P = 0.031), being at home (z = 2.49; P = 0.013) and an excellent self-rated health status (z = 2.35; P = 0.019). The magnitude of differences in mQOL was small. This study suggests that mQOL amongst university students relates to personal, environmental and occupational factors. The use of smartphone-based ESM appears to be a practical approach for investigating participation and QOL. Further research utilising a more diverse sample, analysing at the individual level, and using ESM in conjunction with other methodologies is recommended. © 2017 Occupational Therapy Australia.

Image quality in low-dose coronary computed tomography angiography with a new high-definition CT scanner.

PubMed

Kazakauskaite, Egle; Husmann, Lars; Stehli, Julia; Fuchs, Tobias; Fiechter, Michael; Klaeser, Bernd; Ghadri, Jelena R; Gebhard, Catherine; Gaemperli, Oliver; Kaufmann, Philipp A

2013-02-01

A new generation of high definition computed tomography (HDCT) 64-slice devices complemented by a new iterative image reconstruction algorithm-adaptive statistical iterative reconstruction, offer substantially higher resolution compared to standard definition CT (SDCT) scanners. As high resolution confers higher noise we have compared image quality and radiation dose of coronary computed tomography angiography (CCTA) from HDCT versus SDCT. Consecutive patients (n = 93) underwent HDCT, and were compared to 93 patients who had previously undergone CCTA with SDCT matched for heart rate (HR), HR variability and body mass index (BMI). Tube voltage and current were adapted to the patient's BMI, using identical protocols in both groups. The image quality of all CCTA scans was evaluated by two independent readers in all coronary segments using a 4-point scale (1, excellent image quality; 2, blurring of the vessel wall; 3, image with artefacts but evaluative; 4, non-evaluative). Effective radiation dose was calculated from DLP multiplied by a conversion factor (0.014 mSv/mGy × cm). The mean image quality score from HDCT versus SDCT was comparable (2.02 ± 0.68 vs. 2.00 ± 0.76). Mean effective radiation dose did not significantly differ between HDCT (1.7 ± 0.6 mSv, range 1.0-3.7 mSv) and SDCT (1.9 ± 0.8 mSv, range 0.8-5.5 mSv; P = n.s.). HDCT scanners allow low-dose 64-slice CCTA scanning with higher resolution than SDCT but maintained image quality and equally low radiation dose. Whether this will translate into higher accuracy of HDCT for CAD detection remains to be evaluated.

Obstructive sleep apnea syndrome and sleep quality in hypertensive patients.

PubMed

Bacci, Marcelo Rodrigues; Emboz, Jonathan Naim Mora; Alves, Beatriz da Costa Aguiar; Veiga, Glaucia Luciano da; Murad, Neif; Meneghini, Adriano; Chagas, Antonio Carlos P; Fonseca, Fernando Luiz Affonso

2017-12-01

Obstructive sleep apnea and hypopnea syndrome (OSAHS) is one of the developmental factors of high blood pressure (HBP), a relevant global public health problem. OSAHS is characterized by the reduction or complete cessation of respiratory airflow due to intermittent airway collapse. Additionally, significant changes in sleep rhythm and pattern are observed in these patients. To evaluate the association between OSAHS and sleep quality in essential and resistant hypertensives. A cross-sectional, observational study evaluated 43 hypertensive patients treated at the outpatient clinics of the Faculdade de Medicina do ABC (FMABC) who were medicated with two or more antihypertensive drugs and divided into nonresistant or resistant to treatment. Group I (using up to two antihypertensive agents - 60.47% of the sample) presented mean systolic blood pressure (SBP) of 127.5±6.4 mmHg, mean diastolic blood pressure (DBP) of 79.6±5.2 mmHg, mean body mass index (BMI) of 27.2±5.3 kg/m2 and mean age of 51.2±15.1 years. Group II (using more than two antihypertensive drugs - 37.2% of the sample) presented mean SBP of 132.1±9.3 mmHg, mean DBP of 84.5±5.8 mmHg, mean BMI of 27.2±7.2 kg/m2 and mean age of 55.5±13.4 years. The patients presented low quality of sleep/sleep disorder evaluated by the Pittsburgh Sleep Quality Index (PSQI), which represents a preponderant factor for OSAHS. Patients at high risk for OSAHS had poor sleep quality and high levels of DBP, suggesting a causal relation between these parameters. However, they did not present a higher prevalence of resistant high blood pressure (RHBP).

Photodiode area effect on performance of X-ray CMOS active pixel sensors

NASA Astrophysics Data System (ADS)

Kim, M. S.; Kim, Y.; Kim, G.; Lim, K. T.; Cho, G.; Kim, D.

2018-02-01

Compared to conventional TFT-based X-ray imaging devices, CMOS-based X-ray imaging sensors are considered next generation because they can be manufactured in very small pixel pitches and can acquire high-speed images. In addition, CMOS-based sensors have the advantage of integration of various functional circuits within the sensor. The image quality can also be improved by the high fill-factor in large pixels. If the size of the subject is small, the size of the pixel must be reduced as a consequence. In addition, the fill factor must be reduced to aggregate various functional circuits within the pixel. In this study, 3T-APS (active pixel sensor) with photodiodes of four different sizes were fabricated and evaluated. It is well known that a larger photodiode leads to improved overall performance. Nonetheless, if the size of the photodiode is > 1000 μm2, the degree to which the sensor performance increases as the photodiode size increases, is reduced. As a result, considering the fill factor, pixel-pitch > 32 μm is not necessary to achieve high-efficiency image quality. In addition, poor image quality is to be expected unless special sensor-design techniques are included for sensors with a pixel pitch of 25 μm or less.

Effects of Iodized Salt and Iodine Supplements on Prenatal and Postnatal Growth: A Systematic Review.

PubMed

Farebrother, Jessica; Naude, Celeste E; Nicol, Liesl; Sang, Zhongna; Yang, Zhenyu; Jooste, Pieter L; Andersson, Maria; Zimmermann, Michael B

2018-05-01

Hypothyroidism due to iodine deficiency can impair physical development, most visibly in the marked stunting of myxedematous cretinism caused by severe in utero iodine deficiency. Whether iodine repletion improves growth in noncretinous children is uncertain. Therefore, the aim of our systematic review was to assess the effects of iodine fortification or supplementation on prenatal and postnatal growth outcomes in noncretinous children. Following Cochrane methods and PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) reporting guidelines, we searched 10 databases including 2 Chinese databases (latest search February 2017). We included randomized and nonrandomized controlled trials (RCTs; non-RCTs), controlled before-after (CBA) studies, and interrupted time-series studies in pregnant women and children (≤18 y), which compared the effects of iodine (any form, dose, regimen) to placebo, noniodized salt, or no intervention on prenatal and postnatal growth outcomes. We calculated mean differences with 95% CIs, performed random-effects meta-analyses, and assessed the quality of evidence with the use of GRADE (Grading of Recommendations Assessment, Development and Evaluation). We included 18 studies (13 RCTs, 4 non-RCTs, 1 CBA) (n = 5729). Iodine supplementation of severely iodine-deficient pregnant women increased mean birthweight [mean difference (MD): 200 g; 95% CI: 183, 217 g; n = 635; 2 non-RCTs] compared to controls, but the quality of this evidence was assessed as very low. Iodine repletion across the other groups showed no effects on primary growth outcomes (quality of evidence mostly low and very low). Meta-analyses showed a positive effect in moderate-to-mildly iodine-deficient schoolchildren on insulin-like growth factor-1 (MD: 38.48 ng/mL; 95% CI: 6.19, 70.76 ng/mL; n = 498; 2 RCTs, low-quality evidence) and insulin-like growth factor binding protein-3 (MD: 0.46 μg/mL; 95% CI: 0.25, 0.66 μg/mL; n = 498; 2 RCTs, low-quality evidence). In conclusion, we identified few well-designed trials examining the effects of iodine repletion on growth. We are uncertain whether prenatal iodine repletion increases infant growth. Postnatal iodine repletion may improve growth factors but has no clear effects on somatic growth. Our systematic review was registered with PROSPERO as CRD42014012940.

Prevalence and factors associated with poor sleep quality among secondary school teachers in a developing country.

PubMed

Musa, Nor Asma; Moy, Foong Ming; Wong, Li Ping

2018-05-31

This study aimed to determine the prevalence and factors associated with poor sleep quality among secondary school teachers in the state of Selangor, Malaysia. This was a cross sectional study, conducted in two phases. Phase I tested the reliability of the Pittsburgh Sleep Quality Index in the Malay language (M-PSQI), whereas Phase II determined the prevalence and factors associated with poor sleep quality where a total of 1871 secondary school teachers were studied. Participants were recruited using multistage sampling. Self-administered questionnaire was used to collect data on socio-demographic and teaching characteristics, comorbidities and characteristics of sleep. The M-PSQI was used to measure sleep quality. The Depression Anxiety Stress Scale-21 was used to measure mental health status. Results showed that the M-PSQI had a good internal consistency and moderate reliability. The prevalence of poor sleep quality was 61 (95% CI: 54-67) %. Total teaching hours/day, depression and stress were significantly associated with poor sleep quality in the univariate analysis, while only stress (OR 1.04; 95% CI 1.02-1.05%) remained significant in the multivariate analyses. In conclusion, stress level of the secondary school teachers should be reduced to improve sleep quality.

A dual-end-pumped Ho:YAG laser with a high energy output

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duan, X M; Cui, Zh; Dai, T Y

2015-08-31

We report a high energy output from a Ho:YAG oscillator resonantly double-end pumped by Tm:YLF lasers at room temperature. The maximum pulse energy of 52.5 mJ was achieved at a pulse repetition rate of 100Hz and a pulse duration of 35.2 ns, corresponding to a peak power of approximately 1.5 MW. The output wavelength was 2090.7 nm with beam quality factor M{sup 2} ∼ 1.2. (lasers)

Effect of altitude on biochemical composition and quality of green arabica coffee beans can be affected by shade and postharvest processing method.

PubMed

Worku, Mohammed; de Meulenaer, Bruno; Duchateau, Luc; Boeckx, Pascal

2018-03-01

Although various studies have assessed altitude, shade and postharvest processing effects on biochemical content and quality of coffee beans, data on their interactions are scarce. The individual and interactive effects of these factors on the caffeine, chlorogenic acids (CGA) and sucrose contents as well as physical and sensory qualities of green coffee beans from large plantations in southwestern Ethiopia were evaluated. Caffeine and CGA contents decreased with increasing altitude; they respectively declined 0.12 and 1.23gkg -1 100m -1 . Sucrose content increased with altitude; however, the altitude effect was significant for wet-processed beans (3.02gkg -1 100m -1 ), but not for dry-processed beans (0.36g kg -1 100m -1 ). Similarly, sucrose content increased with altitude with much stronger effect for coffee grown without shade (2.11gkg -1 100m -1 ) compared to coffee grown under shade (0.93gkg -1 100m -1 ). Acidity increased with altitude when coffee was grown under shade (0.22 points 100m -1 ), but no significant altitude effect was observed on coffee grown without shade. Beans grown without shade showed a higher physical quality score for dry (37.2) than for wet processing (29.1). These results generally underline the complex interaction effects between altitude and shade or postharvest processing on biochemical composition and quality of green arabica coffee beans. Copyright © 2017. Published by Elsevier Ltd.

Broken symmetry dielectric resonators for high quality factor Fano metasurfaces

DOE PAGES

Campione, Salvatore; Liu, Sheng; Basilio, Lorena I.; ...

2016-10-25

We present a new approach to dielectric metasurface design that relies on a single resonator per unit cell and produces robust, high quality factor Fano resonances. Our approach utilizes symmetry breaking of highly symmetric resonator geometries, such as cubes, to induce couplings between the otherwise orthogonal resonator modes. In particular, we design perturbations that couple “bright” dipole modes to “dark” dipole modes whose radiative decay is suppressed by local field effects in the array. Our approach is widely scalable from the near-infrared to radio frequencies. We first unravel the Fano resonance behavior through numerical simulations of a germanium resonator-based metasurfacemore » that achieves a quality factor of ~1300 at ~10.8 μm. Then, we present two experimental demonstrations operating in the near-infrared (~1 μm): a silicon-based implementation that achieves a quality factor of ~350; and a gallium arsenide-based structure that achieves a quality factor of ~600, the highest near-infrared quality factor experimentally demonstrated to date with this kind of metasurface. Importantly, large electromagnetic field enhancements appear within the resonators at the Fano resonant frequencies. Here, we envision that combining high quality factor, high field enhancement resonances with nonlinear and active/gain materials such as gallium arsenide will lead to new classes of active optical devices.« less

Broken symmetry dielectric resonators for high quality factor Fano metasurfaces

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campione, Salvatore; Liu, Sheng; Basilio, Lorena I.

We present a new approach to dielectric metasurface design that relies on a single resonator per unit cell and produces robust, high quality factor Fano resonances. Our approach utilizes symmetry breaking of highly symmetric resonator geometries, such as cubes, to induce couplings between the otherwise orthogonal resonator modes. In particular, we design perturbations that couple “bright” dipole modes to “dark” dipole modes whose radiative decay is suppressed by local field effects in the array. Our approach is widely scalable from the near-infrared to radio frequencies. We first unravel the Fano resonance behavior through numerical simulations of a germanium resonator-based metasurfacemore » that achieves a quality factor of ~1300 at ~10.8 μm. Then, we present two experimental demonstrations operating in the near-infrared (~1 μm): a silicon-based implementation that achieves a quality factor of ~350; and a gallium arsenide-based structure that achieves a quality factor of ~600, the highest near-infrared quality factor experimentally demonstrated to date with this kind of metasurface. Importantly, large electromagnetic field enhancements appear within the resonators at the Fano resonant frequencies. Here, we envision that combining high quality factor, high field enhancement resonances with nonlinear and active/gain materials such as gallium arsenide will lead to new classes of active optical devices.« less

Analysis of Multimode Low-Probability-of-Intercept (LPI) Communications With Atmospheric Effects

DTIC Science & Technology

1996-12-01

of the Requirements for the Degree of Master of Science in Electrical Engineering Ala Ghordlo, B.ENG Captain, Royal Jordanian Air Force December...2-10 2.1.3.5 Atmospheric Quality Factor ............... 2-10 2.2 Propagation Models And Atmospheric Models ............ 2-12 2.2.1 The...Hata Model .............................. 2-12 2.2.2 The MPM Model ....... ...................... 2-13 2.2.3 Discussion of M odels .................... 2

Performance of large aperture tapered fiber phase conjugate mirror with high pulse energy and 1-kHz repetition rate.

PubMed

Zhao, Zhigang; Dong, Yantao; Pan, Sunqiang; Liu, Chong; Chen, Jun; Tong, Lixin; Gao, Qingsong; Tang, Chun

2012-01-16

A large aperture fused silica tapered fiber phase conjugate mirror is presented with a maximum 70% stimulated Brillouin scattering (SBS) reflectivity, which is obtained with 1 kHz repetition rate, 15 ns pulse width and 38 mJ input pulse energy. To the best of our knowledge, this is the highest SBS reflectivity ever reported by using optical fiber as a phase conjugate mirror for such high pulse repetition rate (1 kHz) and several tens of millijoule (mJ) input pulse energy. The influences of fiber end surface quality and pump pulse widths on SBS reflectivity are investigated experimentally. The results show that finer fiber end surface quality and longer input pulse widths are preferred for obtaining higher SBS reflectivity with higher input pulse energy. Double passing amplification experiments are also performed. 52 mJ pulse energy is achieved at 1 kHz repetition rate, with a reflected SBS pulse width of 1.5 ns and a M(2) factor of 2.3. The corresponding peak power reaches 34.6 MW. Obvious beam quality improvement is observed.

LITERATURE ABSTRACTS.

PubMed

1971-12-01

1. General Principles: 'Statistical Aspect of the Correlation Between Objective and Subjective Measurements of Meat Tenderness', by M. C. Gacula, Jr., J. B. Reaume, K. J. Morgan, and R. L. Luckett 1. General Principles: 'Texture of Semi-Solid Foods: Sensory and Physical Correlates', by W. F. Henry, M. H. Katz, F. J. Pilgrim, and A. T. May 2. Instrumentation and Methodology: 'Measurement of Bread Staling', by W. Morandini and L. Wassermann 2. Instrumentation and Methodology: 'Physical Considerations of the Methods of Consistency Measurement of Butter', by E. Knoop 2. Instrumentation and Methodology: 'Electronic Recording Mixers for the Baking Test', by P. W. Voisey, V. M. Bendelow and H. Miller 2. Instrumentation and Methodology: 'Measurement of the Consistency of Reconstituted Instant Potato Flakes', by P. W. Voisey and P. R. Dean 2. Instrumentation and Methodology: 'The Ottawa Electronic Recording Farinograph', by P. W. Voisey, H. Miller and P. L. Byrne 3. Objective Measurements: A. FOODS: 'The Rheological Properties of Corn Horny Endosperm', by J. R. Hamerle*, R. K. White**, and N. N. Mohsenin*** 3. Objective Measurements: 'Evaluation of Mechanical Properties of Comminuted Sausages by Construction and Analysis of Rheological Model', by St. Tyszkiewicz 3. Objective Measurements: 'Studies on Creep Compliance of Butter', by M. Chwiej 3. Objective Measurements: 'Heat-Induced Milk Gels. II. Preparation of Gels and Measurement of Firmness', by M. Kalab, P. W. Voisey and D. B. Emmons 3. Objective Measurements: 'Rheology of Fresh, Aged and Gamma-Irradiated Egg White', by M. A. Tung, J. F. Richards, B. C. Morrison and E. L. Watson 3. Objective Measurements: 'Retardation of Bread Staling - Practical Experiences', by W. Morandini and L. Wassermann 3. Objective Measurements: B. PHARMACEUTICALS: 'Influence of HLB on Certain Physicochemical Parameters of an O/W Emulsion', by M. Schrenzel 3. Objective Measurements: 'The Rheological Evaluation of Semisolids', by L. H. Block and P. P. Lamy 4. Factors Affecting Texture: 'Effects of Physical and Mechanical Treatments on the Tenderness of the Beef Longissimus', by G. C. Smith, T. C. Arango and Z. L. Carpenter 4. Factors Affecting Texture: 'Histological and Physical Changes in Carrots as Affected by Blanching, Cooking, Freezing, Freeze Drying and Compression', by A. R. Rahman, W. L. Henning and D. E. Westcott 4. Factors Affecting Texture: 'Effects of Physiological Maturity of Beef and Marbling of Rib Steaks on Eating Quality', by H. L. Norris, D. L. Harrison, L. L. Anderson, B. Van Welck and H. J. Tuma 4. Factors Affecting Texture: 'Effect of Ultimate pH Upon the Water-Holding Capacity and Tenderness of Mutton', by P. E. Bouton, P. V. Harris and W. R. Shorthose 4. Factors Affecting Texture: 'The Dilution Coefficient of Butter Serum and the Consistency of Butter', by E. Pijanowski, M. Chwiej, H. Hernik and M. Kurtowicz 4. Factors Affecting Texture: 'Moisture and pH Changes as Criteria of Freshness in Abalone and their Relationship to Texture of the Canned Product', by D. G. James and J. Olley 4. Factors Affecting Texture: 'Effect of Sucrose on Crispness of Explosion-Puffed Apple Pieces Exposed to High Humidities', by E. O. Strolle, J. Cording, Jr., P. E. McDowell, and R. K. Eskew 4. Factors Affecting Texture: 'Effect of Heat Treatment on Viscosity of Yolk', by P. K. Chang, W. D. Powrie and O. Fennema 4. Factors Affecting Texture: 'Protein Quality and Quantity: A Rheological Assessment of the Relative Importance in Breadmaking', by T. Webb, P. W. Heaps, and J. B. M. Coppock 4. Factors Affecting Texture: 'Bread Staling. 1. Experimental Study', by E. M. A. Willhoft 4. Factors Affecting Texture: 'Bread Staling. II. Theoretical Study', by E. M. A. Willhoft.

Establishing an EGFR mutation screening service for non-small cell lung cancer - sample quality criteria and candidate histological predictors.

PubMed

Leary, Alexandra F; Castro, David Gonzalez de; Nicholson, Andrew G; Ashley, Sue; Wotherspoon, Andrew; O'Brien, Mary E R; Popat, Sanjay

2012-01-01

EGFR screening requires good quality tissue, sensitivity and turn-around time (TAT). We report our experience of routine screening, describing sample type, TAT, specimen quality (cellularity and DNA yield), histopathological description, mutation result and clinical outcome. Non-small cell lung cancer (NSCLC) sections were screened for EGFR mutations (M+) in exons 18-21. Clinical, pathological and screening outcome data were collected for year 1 of testing. Screening outcome alone was collected for year 2. In year 1, 152 samples were tested, most (72%) were diagnostic. TAT was 4.9 days (95%confidence interval (CI)=4.5-5.5). EGFR-M+ prevalence was 11% and higher (20%) among never-smoking women with adenocarcinomas (ADCs), but 30% of mutations occurred in current/ex-smoking men. EGFR-M+ tumours were non-mucinous ADCs and 100% thyroid transcription factor (TTF1+). No mutations were detected in poorly differentiated NSCLC-not otherwise specified (NOS). There was a trend for improved overall survival (OS) among EGFR-M+ versus EGFR-M- patients (median OS=78 versus 17 months). In year 1, test failure rate was 19%, and associated with scant cellularity and low DNA concentrations. However 75% of samples with poor cellularity but representative of tumour were informative and mutation prevalence was 9%. In year 2, 755 samples were tested; mutation prevalence was 13% and test failure only 5.4%. Although samples with low DNA concentration (<2 ng/μL) had more test failures (30% versus 3.9% for [DNA]>2.2 ng/μL), the mutation rate was 9.2%. Routine epidermal growth factor receptor (EGFR) screening using diagnostic samples is fast and feasible even on samples with poor cellularity and DNA content. Mutations tend to occur in better-differentiated non-mucinous TTF1+ ADCs. Whether these histological criteria may be useful to select patients for EGFR testing merits further investigation. Copyright © 2011 Elsevier Ltd. All rights reserved.

Treatment with acetyl-l-carnitine during in vitro maturation of buffalo oocytes improves oocyte quality and subsequent embryonic development.

PubMed

Xu, Hui-Yan; Yang, Xiao-Gan; Lu, Sheng-Sheng; Liang, Xing-Wei; Lu, Yang-Qing; Zhang, Ming; Lu, Ke-Huan

2018-06-01

Oocyte quality is one of the important factors in female fertility, in vitro maturation (IVM), and subsequent embryonic development. In the present study, we assessed whether acetyl-l-carnitine (ALC) supplementation during in vitro maturation of buffalo oocytes could improve oocyte quality and subsequent embryonic development. To determine the optimal level of ALC supplementation, we matured cumulus-oocyte complexes in maturation medium supplemented with 0, 2.5, and 5 mM ALC. The oocytes with a polar body were selected for parthenogenetic activation (PA) and in vitro fertilization (IVF). We found that oocytes matured in 2.5 mM ALC had significantly higher PA blastocyst rate (P < 0.05) and blastocyst cell number than those of unsupplemented oocytes (P < 0.05) and a significantly higher IVF blastocyst rate than that of oocytes matured in 5 mM ALC (P < 0.05). In all further experiments, we supplemented the maturation medium with 2.5 mM ALC. We then tested whether ALC supplementation could improve various markers of oocytes and cumulus cells. We compared cell proliferation; concentrations of reactive oxygen species (ROS), intracellular ATP, estradiol, and progesterone; mitochondrial distribution; mitochondrial DNA copy number (mtDNA); and expression levels of four genes encoding oocyte-derived factors (GDF9, BMP15) and steroid hormones (StAR, P450scc) between the supplemented and unsupplemented oocytes and cumulus cells. Cumulus cells matured with ALC supplementation were more prolific than those matured without ALC supplementation (P < 0.05). Oocytes treated with ALC had lower concentrations of intracellular ROS (P < 0.05) and a higher rate of diffuse mitochondrial distributions (P < 0.05) than those of untreated oocytes. Additionally, the mtDNA was higher in the ALC-treated oocytes (P < 0.05) and cumulus cells (P < 0.05) than that in the untreated cells. The ALC-treated maturation medium had a higher postmaturation concentration of estradiol than that of the untreated medium (P < 0.05). Finally, the gene expression levels of P450scc and GDF9 were greater in ALC-treated oocytes and cumulus cells than those in untreated cells (P < 0.05). Therefore, in buffalo, our results suggest that ALC affects mitochondrial function, regulates oocyte-derived paracrine factors, and increases the production of steroid hormones, leading to increased quality of matured oocytes and improved embryonic development in vitro. Copyright © 2018 Elsevier Inc. All rights reserved.

Analysis and optimization of acoustic wave micro-resonators integrating piezoelectric zinc oxide layers

NASA Astrophysics Data System (ADS)

Mortada, O.; Zahr, A. H.; Orlianges, J.-C.; Crunteanu, A.; Chatras, M.; Blondy, P.

2017-02-01

This paper reports on the design, simulation, fabrication, and test results of ZnO-based contour-mode micro-resonators integrating piezoelectric zinc oxide (ZnO) layers. The inter-digitated (IDT) type micro-resonators are fabricated on ZnO films and suspended top of 2 μm thick silicon membranes using silicon-on insulator technology. We analyze several possibilities of increasing the quality factor (Q) and the electromechanical coupling coefficient (kt2) of the devices by varying the numbers and lengths of the IDT electrodes and using different thicknesses of the ZnO layer. We designed and fabricated IDTs of different finger numbers (n = 25, 40, 50, and 80) and lengths (L = 100/130/170/200 μm) for three different thicknesses of ZnO films (200, 600, and 800 nm). The measured Q factor confirms that reducing the length and the number of IDT fingers enables us to reach better electrical performances at resonant frequencies around 700 MHz. The extracted results for an optimized micro-resonator device having an IDT length of 100 μm and 40 finger electrodes show a Q of 1180 and a kt2 of 7.4%. We demonstrate also that the reduction of the ZnO thickness from 800 nm to 200 nm increases the quality factor from 430 to 1600, respectively, around 700 MHz. Experimental data are in very good agreement with theoretical simulations of the fabricated devices

Development of methane conversion factor models for Zebu beef cattle fed low-quality crop residues and by-products in tropical regions.

PubMed

Kaewpila, Chatchai; Sommart, Kritapon

2016-10-01

The enteric methane conversion factor ( Y m ) is an important country-specific value for the provision of precise enteric methane emissions inventory reports. The objectives of this meta-analysis were to develop and evaluate the empirical Y m models for the national level and the farm level for tropical developing countries according to the IPCC's categorization. We used datasets derived from 18 in vivo feeding experiments from 1999 to 2015 of Zebu beef cattle breeds fed low-quality crop residues and by-products. We found that the observed Y m value was 8.2% gross energy (GE) intake (~120 g methane emission head -1  day -1 ) and ranged from 4.8% to 13.7% GE intake. The IPCC default model (tier 2, Y m  = 6.5% ± 1.0% GE intake) underestimated the Y m values by up to 26.1% compared with its refinement of 8.4% ± 0.4% GE intake for the national-level estimate. Both the IPCC default model and the refined model performed worse in predicting Y m trends at the farm level (root mean square prediction error [MSPE] = 15.1%-23.1%, concordance correlation coefficient [CCC] = 0.16-0.18, R 2  = .32). Seven of the extant Y m models based on a linear regression approach also showed inaccurately estimated Y m values (root MSPE = 16.2%-36.0%, CCC = 0.02-0.27, R 2  < .37). However, one of the developed models, which related to the complexity of the energy use efficiencies of the diet consumed to Y m , showed adequate accuracy at the farm level (root MSPE = 9.1%, CCC = 0.75, R 2  = .67). Our results thus suggest a new Y m model and future challenges for estimating Zebu beef cattle production in tropical developing countries.

Binary phase plates cannot improve laser beam quality.

PubMed

Siegman, A E

1993-05-01

Binary phase plates are often suggested as a means for improving the far-field brightness of beams coming from antiphased laser arrays or waveguide lasers operating in higher-order modes. Somewhat surprisingly, however, binary phase plates actually cannot improve at all the second-moment-based beam quality factor M(2) as usually defined for such beams. Even from a power-in-the-bucket viewpoint, their usefulness is debatable.

mRNA quality control is bypassed for immediate export of stress-responsive transcripts.

PubMed

Zander, Gesa; Hackmann, Alexandra; Bender, Lysann; Becker, Daniel; Lingner, Thomas; Salinas, Gabriela; Krebber, Heike

2016-12-12

Cells grow well only in a narrow range of physiological conditions. Surviving extreme conditions requires the instantaneous expression of chaperones that help to overcome stressful situations. To ensure the preferential synthesis of these heat-shock proteins, cells inhibit transcription, pre-mRNA processing and nuclear export of non-heat-shock transcripts, while stress-specific mRNAs are exclusively exported and translated. How cells manage the selective retention of regular transcripts and the simultaneous rapid export of heat-shock mRNAs is largely unknown. In Saccharomyces cerevisiae, the shuttling RNA adaptor proteins Npl3, Gbp2, Hrb1 and Nab2 are loaded co-transcriptionally onto growing pre-mRNAs. For nuclear export, they recruit the export-receptor heterodimer Mex67-Mtr2 (TAP-p15 in humans). Here we show that cellular stress induces the dissociation of Mex67 and its adaptor proteins from regular mRNAs to prevent general mRNA export. At the same time, heat-shock mRNAs are rapidly exported in association with Mex67, without the need for adapters. The immediate co-transcriptional loading of Mex67 onto heat-shock mRNAs involves Hsf1, a heat-shock transcription factor that binds to heat-shock-promoter elements in stress-responsive genes. An important difference between the export modes is that adaptor-protein-bound mRNAs undergo quality control, whereas stress-specific transcripts do not. In fact, regular mRNAs are converted into uncontrolled stress-responsive transcripts if expressed under the control of a heat-shock promoter, suggesting that whether an mRNA undergoes quality control is encrypted therein. Under normal conditions, Mex67 adaptor proteins are recruited for RNA surveillance, with only quality-controlled mRNAs allowed to associate with Mex67 and leave the nucleus. Thus, at the cost of error-free mRNA formation, heat-shock mRNAs are exported and translated without delay, allowing cells to survive extreme situations.

Correlates of overall and central obesity in adults from seven European countries: findings from the Food4Me Study.

PubMed

Celis-Morales, Carlos; Livingstone, Katherine M; Affleck, Alexander; Navas-Carretero, Santiago; San-Cristobal, Rodrigo; Martinez, J Alfredo; Marsaux, Cyril F M; Saris, Wim H M; O'Donovan, Clare B; Forster, Hannah; Woolhead, Clara; Gibney, Eileen R; Walsh, Marianne C; Brennan, Lorraine; Gibney, Mike; Moschonis, George; Lambrinou, Christina-Paulina; Mavrogianni, Christina; Manios, Yannis; Macready, Anna L; Fallaize, Rosalind; Lovegrove, Julie A; Kolossa, Silvia; Daniel, Hannelore; Traczyk, Iwona; Drevon, Christian A; Mathers, John C

2018-02-01

To identify predictors of obesity in adults and investigate to what extent these predictors are independent of other major confounding factors. Data collected at baseline from 1441 participants from the Food4Me study conducted in seven European countries were included in this study. A food frequency questionnaire was used to measure dietary intake. Accelerometers were used to assess physical activity levels (PA), whereas participants self-reported their body weight, height and waist circumference via the internet. The main factors associated (p < 0.05) with higher BMI per 1-SD increase in the exposure were age (β:1.11 kg/m 2 ), intakes of processed meat (β:1.04 kg/m 2 ), red meat (β:1.02 kg/m 2 ), saturated fat (β:0.84 kg/m 2 ), monounsaturated fat (β:0.80 kg/m 2 ), protein (β:0.74 kg/m 2 ), total energy intake (β:0.50 kg/m 2 ), olive oil (β:0.36 kg/m 2 ), sugar sweetened carbonated drinks (β:0.33 kg/m 2 ) and sedentary time (β:0.73 kg/m 2 ). In contrast, the main factors associated with lower BMI per 1-SD increase in the exposure were PA (β:-1.36 kg/m 2 ), intakes of wholegrains (β:-1.05 kg/m 2 ), fibre (β:-1.02 kg/m 2 ), fruits and vegetables (β:-0.52 kg/m 2 ), nuts (β:-0.52 kg/m 2 ), polyunsaturated fat (β:-0.50 kg/m 2 ), Healthy Eating Index (β:-0.42 kg/m 2 ), Mediterranean diet score (β:-0.40 kg/m 2 ), oily fish (β:-0.31 kg/m 2 ), dairy (β:-0.31 kg/m 2 ) and fruit juice (β:-0.25 kg/m 2 ). These findings are important for public health and suggest that promotion of increased PA, reducing sedentary behaviours and improving the overall quality of dietary patterns are important strategies for addressing the existing obesity epidemic and associated disease burden.

Collaboration of liquid bio-ameliorant and compost effect to crop yield and decreasing of inorganic fertilizer utilization for sustainable agriculture

NASA Astrophysics Data System (ADS)

Rasyid, B.

2018-05-01

Soil quality and plant productivity are main issue in agriculture production. The purpose of this research was to obtain sustainable crop management in effort to improve soil quality and increase maize production through collaboration of liquid bio-ameliorant and compost. Field experiment was carried out in two planting season with factorial experimental design replicated three times in 2m x 2m plots. Duncan multiple range test was used to analysis the effect of treatment on all parameters evaluated. The first planting season, treatments were arranged in three factors as: (1) planting space with two spaces, (2) three concentration of liquid bio-ameliorant, and (3) three level of urea fertilizer. The second planting season, treatments were arranged in two factors as: (1) liquid bio-ameliorant (LBA) with four concentrations and (2) compost with four levels. In the first season, result showed in soil quality parameters such as microbial density and soil chemical properties increased approximately 28%. The highest yield of 9.00 ton ha-1 was found in application 300 ml l-1 LBA + urea 240 kg ha-1. In the second season, collaboration treatment of 250 ml l-1 LBA + 10 ton ha-1 compost had the highest yield by 10.47 ton ha-1. This study confirmed that collaboration of liquid bio-ameliorant and compost could be used as fertilizer complement and reducing inorganic fertilizer utilization to sustain crop production and soil quality.

Optimized adipose tissue engineering strategy based on a neo-mechanical processing method.

PubMed

He, Yunfan; Lin, Maohui; Wang, Xuecen; Guan, Jingyan; Dong, Ziqing; Feng, Lu; Xing, Malcolm; Feng, Chuanbo; Li, Xiaojian

2018-05-26

Decellularized adipose tissue (DAT) represents a promising scaffold for adipose tissue engineering. However, the unique and prolonged lipid removal process required for adipose tissue can damage extracellular matrix (ECM) constituents. Moreover, inadequate vascularization limits the recellularization of DAT in vivo. We proposed a neo-mechanical protocol for rapidly breaking adipocytes and removing lipid content from adipose tissue. The lipid-depleted adipose tissue was then subjected to a fast and mild decellularization to fabricate high-quality DAT (M-DAT). Adipose liquid extract (ALE) derived from this mechanical process was collected and incorporated into M-DAT to further optimize in vivo recellularization. Ordinary DAT was fabricated and served as a control. This developed strategy was evaluated based on decellularization efficiency, ECM quality, and recellularization efficiency. Angiogenic factor components and angiogenic potential of ALE were evaluated in vivo and in vitro. M-DAT achieved the same decellularization efficiency, but exhibited better retention of ECM components and recellularization, compared to those with ordinary DAT. Protein quantification revealed considerable levels of angiogenic factors (basic fibroblast growth factor, epidermal growth factor, transforming growth factor-β1, and vascular endothelial growth factor) in ALE. ALE promoted tube formation in vitro and induced intense angiogenesis in M-DAT in vivo; furthermore, higher expression of the adipogenic factor PPARγ and greater numbers of adipocytes were evident following ALE treatment, compared to those in the M-DAT group. Mechanical processing of adipose tissue led to the production of high-quality M-DAT and angiogenic factor-enriched ALE. The combination of ALE and M-DAT could be a promising strategy for engineered adipose tissue construction. This article is protected by copyright. All rights reserved. © 2018 by the Wound Healing Society.

Indoor air quality in primary schools in Kecioren, Ankara.

PubMed

Babayiğit, Mustafa Alparslan; Bakir, Bilal; Tekbaş, Omer Faruk; Oğur, Recai; Kiliç, Abdullah; Ulus, Serdar

2014-01-01

To increase the awareness of environmental risk factors by determining the indoor air quality status of primary schools. Indoor air quality parameters in 172 classrooms of 31 primary schools in Kecioren, Ankara, were examined for the purpose of assessing the levels of air pollutants (CO, CO2, SO2, NO2, and formaldehyde) within primary schools. Schools near heavy traffic had a statistically significant mean average of CO and SO2 (P < 0.05). The classrooms that had more than 35 students had higher and statistically significant averages of CO2, SO2, NO2, and formaldehyde compared to classrooms that had fewer than 35 students (P < 0.05). Of all classrooms, 29% had 100 CFU/100 mL and higher concentrations of microorganisms, which were not pathogens. Indoor air quality management should continually be maintained in primary schools for the prevention and control of acute and chronic diseases, particularly considering biological and chemical pollution.

High quality factor manganese-doped aluminum lumped-element kinetic inductance detectors sensitive to frequencies below 100 GHz

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, G.; Johnson, B. R.; Abitbol, M. H.

Aluminum lumped-element kinetic inductance detectors (LEKIDs) sensitive to millimeter-wave photons have been shown to exhibit high quality factors, making them highly sensitive and multiplexable. The superconducting gap of aluminum limits aluminum LEKIDs to photon frequencies above 100 GHz. Manganese-doped aluminum (Al-Mn) has a tunable critical temperature and could therefore be an attractive material for LEKIDs sensitive to frequencies below 100 GHz if the internal quality factor remains sufficiently high when manganese is added to the film. To investigate, we measured some of the key properties of Al-Mn LEKIDs. A prototype eight-element LEKID array was fabricated using a 40 nm thickmore » film of Al-Mn deposited on a 500 μm thick high-resistivity, float-zone silicon substrate. The manganese content was 900 ppm, the measured T c = 694 ± 1mK, and the resonance frequencies were near 150 MHz. Using measurements of the forward scattering parameter S 21 at various bath temperatures between 65 and 250 mK, we determined that the Al-Mn LEKIDs we fabricated have internal quality factors greater than 2 × 10 5, which is high enough for millimeter-wave astrophysical observations. In the dark conditions under which these devices were measured, the fractional frequency noise spectrum shows a shallow slope that depends on bath temperature and probe tone amplitude, which could be two-level system noise. In conclusion, the anticipated white photon noise should dominate this level of low-frequency noise when the detectors are illuminated with millimeter-waves in future measurements. The LEKIDs responded to light pulses from a 1550 nm light-emitting diode, and we used these light pulses to determine that the quasiparticle lifetime is 60 μs.« less

High quality factor manganese-doped aluminum lumped-element kinetic inductance detectors sensitive to frequencies below 100 GHz

DOE PAGES

Jones, G.; Johnson, B. R.; Abitbol, M. H.; ...

2017-05-29

Aluminum lumped-element kinetic inductance detectors (LEKIDs) sensitive to millimeter-wave photons have been shown to exhibit high quality factors, making them highly sensitive and multiplexable. The superconducting gap of aluminum limits aluminum LEKIDs to photon frequencies above 100 GHz. Manganese-doped aluminum (Al-Mn) has a tunable critical temperature and could therefore be an attractive material for LEKIDs sensitive to frequencies below 100 GHz if the internal quality factor remains sufficiently high when manganese is added to the film. To investigate, we measured some of the key properties of Al-Mn LEKIDs. A prototype eight-element LEKID array was fabricated using a 40 nm thickmore » film of Al-Mn deposited on a 500 μm thick high-resistivity, float-zone silicon substrate. The manganese content was 900 ppm, the measured T c = 694 ± 1mK, and the resonance frequencies were near 150 MHz. Using measurements of the forward scattering parameter S 21 at various bath temperatures between 65 and 250 mK, we determined that the Al-Mn LEKIDs we fabricated have internal quality factors greater than 2 × 10 5, which is high enough for millimeter-wave astrophysical observations. In the dark conditions under which these devices were measured, the fractional frequency noise spectrum shows a shallow slope that depends on bath temperature and probe tone amplitude, which could be two-level system noise. In conclusion, the anticipated white photon noise should dominate this level of low-frequency noise when the detectors are illuminated with millimeter-waves in future measurements. The LEKIDs responded to light pulses from a 1550 nm light-emitting diode, and we used these light pulses to determine that the quasiparticle lifetime is 60 μs.« less

Homoepitaxial nonpolar (10-10) ZnO/ZnMgO monolithic microcavities: Towards reduced photonic disorder

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zuniga-Perez, J., E-mail: jzp@crhea.cnrs.fr; Kappei, L.; Deparis, C.

2016-06-20

Nonpolar ZnO/ZnMgO-based optical microcavities have been grown on (10-10) m-plane ZnO substrates by plasma-assisted molecular beam epitaxy. Reflectivity measurements indicate an exponential increase of the cavity quality factor with the number of layers in the distributed Bragg reflectors. Most importantly, microreflectivity spectra recorded with a spot size in the order of 2 μm show a negligible photonic disorder (well below 1 meV), leading to local quality factors equivalent to those obtained by macroreflectivity. The anisotropic character of the nonpolar heterostructures manifests itself both in the surface features, elongated parallel to the in-plane c direction, and in the optical spectra, with twomore » cavity modes being observed at different energies for orthogonal polarizations.« less

Effect of deposition pressure on the microstructure and thermoelectric properties of epitaxial ScN(001) thin films sputtered onto MgO(001) substrates

DOE PAGES

Burmistrova, Polina V.; Zakharov, Dmitri N.; Favaloro, Tela; ...

2015-03-14

Four epitaxial ScN(001) thin films were successfully deposited on MgO(001) substrates by dc reactive magnetron sputtering at 2, 5, 10, and 20 mTorr in an Ar/N2 ambient atmosphere at 650 °C. The microstructure of the resultant films was analyzed by x-ray diffraction, scanning electron microscopy, and transmission electron microscopy. Electrical resistivity, electron mobility and concentration were measured using the room temperature Hall technique, and temperature dependent in-plain measurements of the thermoelectric properties of the ScN thin films were performed. The surface morphology and film crystallinity significantly degrade with increasing deposition pressure. The ScN thin film deposited at 20 mTorr exhibitsmore » the presence of <221> oriented secondary grains resulting in decreased electric properties and a low thermoelectric power factor of 0.5 W/m-K² at 800 K. ScN thin films grown at 5 and 10 mTorr are single crystalline, yielding the power factor of approximately 2.5 W/m-K² at 800 K. The deposition performed at 2 mTorr produces the highest quality ScN thin film with the electron mobility of 98 cm² V⁻¹ s⁻¹ and the power factor of 3.3 W/m-K² at 800 K.« less

Submillisievert median radiation dose for coronary angiography with a second-generation 320-detector row CT scanner in 107 consecutive patients.

PubMed

Chen, Marcus Y; Shanbhag, Sujata M; Arai, Andrew E

2013-04-01

To (a) use a new second-generation wide-volume 320-detector row computed tomographic (CT) scanner to explore optimization of radiation exposure in coronary CT angiography in an unselected and consecutive cohort of patients referred for clinical purposes and (b) compare estimated radiation exposure and image quality with that from a cohort of similar patients who underwent imaging with a previous first-generation CT system. The study was approved by the institutional review board, and all subjects provided written consent. Coronary CT angiography was performed in 107 consecutive patients with a new second-generation 320-detector row unit. Estimated radiation exposure and image quality were compared with those from 100 consecutive patients who underwent imaging with a previous first-generation scanner. Effective radiation dose was estimated by multiplying the dose-length product by an effective dose conversion factor of 0.014 mSv/mGy ⋅ cm and reported with size-specific dose estimates (SSDEs). Image quality was evaluated by two independent readers. The mean age of the 107 patients was 55.4 years ± 12.0 (standard deviation); 57 patients (53.3%) were men. The median body mass index was 27.3 kg/m(2) (range, 18.1-47.2 kg/m(2)); however, 71 patients (66.4%) were overweight, obese, or morbidly obese. A tube potential of 100 kV was used in 97 patients (90.6%), single-volume acquisition was used in 104 (97.2%), and prospective electrocardiographic gating was used in 106 (99.1%). The mean heart rate was 57.1 beats per minute ± 11.2 (range, 34-96 beats per minute), which enabled single-heartbeat scans in 100 patients (93.4%). The median radiation dose was 0.93 mSv (interquartile range [IQR], 0.58-1.74 mSv) with the second-generation unit and 2.67 mSv (IQR, 1.68-4.00 mSv) with the first-generation unit (P < .0001). The median SSDE was 6.0 mGy (IQR, 4.1-10.0 mGy) with the second-generation unit and 13.2 mGy (IQR, 10.2-18.6 mGy) with the first-generation unit (P < .0001). Overall, the radiation dose was less than 0.5 mSv for 23 of the 107 CT angiography examinations (21.5%), less than 1 mSv for 58 (54.2%), and less than 4 mSv for 103 (96.3%). All studies were of diagnostic quality, with most having excellent image quality. Three of four image quality indexes were significantly better with the second-generation unit compared with the first-generation unit. The combination of a gantry rotation time of 275 msec, wide volume coverage, iterative reconstruction, automated exposure control, and larger x-ray power generator of the second-generation CT scanner provides excellent image quality over a wide range of body sizes and heart rates at low radiation doses. http://radiology.rsna.org/lookup/suppl/doi:10.1148/radiol.13122621/-/DC1. RSNA, 2013

Impact of coping and socioeconomic factors on quality of life in adults with asthma.

PubMed

Adams, Robert J; Wilson, David; Smith, Brian J; Ruffin, Richard E

2004-03-01

The socioeconomic variables of income, race and employment status have been shown to influence health-related quality of life (HRQL) scores in persons with asthma. However, little is known about the impact of other psychological factors or perceptions of economic hardship on HRQL in asthma, despite the known influence these have on general activity levels and emotional perceptions. The aim of the present study was to assess the relationships between psychological and socioeconomic factors and HRQL and on subsequent changes to HRQL over 12 months. Consecutive adult patients with moderate or severe asthma attending outpatient clinics, emergency departments or who were inpatients at two teaching hospitals, completed surveys of clinical status, psychological and socioeconomic variables, and HRQL instruments (SF-36 and Modified Marks Asthma Quality of Life Questionnaire [MAQLQ-M]), at baseline and over 12-months follow-up. Of 343 eligible subjects, survey responses were received from 293 at baseline and 232 at 12-months. Mean age was 42 years (SD 18), 67% were female, 42% had moderate, and 58% severe current asthma clinical status according to the National Asthma Education and Prevention Program guidelines criteria. In random-effects multiple regression models, after adjusting for age, gender, education, income and hospital, significant independent variables associated with each of total MAQLQ-M, SF-36 Physical Component Summary (PCS) and SF-36 Mental Component Summary (MCS) scores were avoidance coping, perceived recent financial difficulties and clinical asthma status. Additional independent associations were, for total MAQLQ-M, patient concerns about costs delaying them from seeking care (overall model r(2) = 0.69); for PCS, active coping (r(2) = 0.69) and for MCS, positive evaluations/satisfaction with illness (r(2) = 0.54). Psychological factors, particularly coping styles, need to be taken into account when considering HRQL scores as outcome measures in asthma. Interventions to improve the coping capabilities of individuals with moderate-to-severe asthma may be potentially important areas for improvement of asthma-related HRQL.

Comparison of Prescribed and Measured Dialysate Sodium: A Quality Improvement Project.

PubMed

Gul, Ambreen; Miskulin, Dana C; Paine, Susan S; Narsipur, Sriram S; Arbeit, Leonard A; Harford, Antonia M; Weiner, Daniel E; Schrader, Ronald; Horowitz, Bruce L; Zager, Philip G

2016-03-01

There is controversy regarding the optimal dialysate sodium concentration for hemodialysis patients. Dialysate sodium concentrations of 134 to 138 mEq/L may decrease interdialytic weight gain and improve hypertension control, whereas a higher dialysate sodium concentration may offer protection to patients with low serum sodium concentrations and hypotension. We conducted a quality improvement project to explore the hypothesis that prescribed and delivered dialysate sodium concentrations may differ significantly. Cross-sectional quality improvement project. 333 hemodialysis treatments in 4 facilities operated by Dialysis Clinic, Inc. Measure dialysate sodium to assess the relationships of prescribed and measured dialysate sodium concentrations. Magnitude of differences between prescribed and measured dialysate sodium concentrations. Dialysate sodium measured pre- and late dialysis. The least square mean of the difference between prescribed minus measured dialysate sodium concentration was -2.48 (95% CI, -2.87 to -2.10) mEq/L. Clinics with a greater number of different dialysate sodium prescriptions (clinic 1, n=8; clinic 2, n=7) and that mixed dialysate concentrates on site had greater differences between prescribed and measured dialysate sodium concentrations. Overall, 57% of measured dialysate sodium concentrations were within ±2 mEq/L of the prescribed dialysate sodium concentration. Differences were greater at higher prescribed dialysate sodium concentrations. We only studied 4 facilities and dialysate delivery machines from 2 manufacturers. Because clinics using premixed dialysate used the same type of machine, we were unable to independently assess the impact of these factors. Pressures in dialysate delivery loops were not measured. There were significant differences between prescribed and measured dialysate sodium concentrations. This may have beneficial or deleterious effects on clinical outcomes, as well as confound results from studies assessing the relationships of dialysate sodium concentrations to outcomes. Additional studies are needed to identify factors that contribute to differences between prescribed and measured dialysate sodium concentrations. Quality assurance and performance improvement (QAPI) programs should include measurements of dialysate sodium. Copyright © 2016 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

Psychometric testing of the Spiritual Well-Being Scale-Mandarin version in Taiwanese cancer patients.

PubMed

Tang, Woung-Ru; Kao, Chen-Yi

2017-06-01

The spiritual well-being of terminally ill cancer patients is an important indicator of the quality of their lives and of the quality of hospice care, but no validated tools are available for assessing this indicator in Taiwan. The present cross-sectional study validated the Spiritual Well-Being Scale-Mandarin version (SWBS-M) by testing its psychometric properties in 243 cancer patients from five teaching hospitals throughout Taiwan. Construct validity was tested by factor analysis and hypothesis testing. Patients' spiritual well-being and quality of life were assessed using the SWBS-M and the McGill Quality of Life Questionnaire (MQoL), respectively. Overall, the SWBS-M had an internal consistency/reliability of 0.89. Exploratory factor analysis showed that the SWBS-M had an underlying two-factor structure, explaining 46.94% of the variance. SWBS-M scores correlated moderately with MQoL scores (r = 0.48, p < 0.01). Terminally ill cancer patients' spiritual well-being was inversely related to their average pain level during the previous 24 hours (r = -0.183, p = 0.006). Cancer patients' spiritual well-being also differed significantly with their experience of pain (t = -3.67, p < 0.001); terminally ill cancer patients with pain during the previous 24 hours had a lower sense of spiritual well-being than those without pain. Our findings support a two-factor model for the SWBS-M in terminally ill Taiwanese cancer patients. We recommend testing the psychometric properties of the SWBS-M in different patient populations to verify its factorial structure in other Asian countries.

Magnetic field dependence of the internal quality factor and noise performance of lumped-element kinetic inductance detectors

NASA Astrophysics Data System (ADS)

Flanigan, D.; Johnson, B. R.; Abitbol, M. H.; Bryan, S.; Cantor, R.; Day, P.; Jones, G.; Mauskopf, P.; McCarrick, H.; Miller, A.; Zmuidzinas, J.

2016-10-01

We present a technique for increasing the internal quality factor of kinetic inductance detectors (KIDs) by nulling ambient magnetic fields with a properly applied magnetic field. The KIDs used in this study are made from thin-film aluminum, they are mounted inside a light-tight package made from bulk aluminum, and they are operated near 150 mK. Since the thin-film aluminum has a slightly elevated critical temperature (Tc = 1.4 K), it therefore transitions before the package (Tc = 1.2 K), which also serves as a magnetic shield. On cooldown, ambient magnetic fields as small as approximately 30 µT can produce vortices in the thin-film aluminum as it transitions because the bulk aluminum package has not yet transitioned and therefore is not yet shielding. These vortices become trapped inside the aluminum package below 1.2 K and ultimately produce low internal quality factors in the thin-film superconducting resonators. We show that by controlling the strength of the magnetic field present when the thin film transitions, we can control the internal quality factor of the resonators. We also compare the noise performance with and without vortices present, and find no evidence for excess noise beyond the increase in amplifier noise, which is expected with increasing loss.

Higher Dietary Cost Is Associated with Higher Diet Quality: A Cross-Sectional Study among Selected Malaysian Adults

PubMed Central

Pondor, Ibnteesam

2017-01-01

Food price is a determining factor of food choices; however its relationship with diet quality is unclear in Malaysia. This study aimed to examine socio-economic characteristics and daily dietary cost (DDC) in relation to diet quality in the state of Selangor, Malaysia. Dietary intake was assessed using a Food Frequency Questionnaire (FFQ) and diet quality was estimated using a Malaysian Healthy Eating Index (M-HEI). DDC in Malaysian Ringgit (RM) was calculated from dietary intake and national food prices. Linear regression models were fitted to determine associations between DDC and M-HEI scores and predictors of diet quality. The mean M-HEI score of respondents was 61.31 ± 10.88 and energy adjusted DDC was RM10.71/2000 kcal (USD 2.49). The highest quintile of adjusted DDC had higher M-HEI scores for all respondents (Q1: 57.14 ± 10.07 versus Q5: 63.26 ± 11.54, p = 0.001). There were also positive associations between DDC and M-HEI scores for fruits (p < 0.001) and vegetables (p = 0.017) for all respondents. Predictors of diet quality included carbohydrate (β = 0290; p < 0.001) and fat intakes (β = −0.242; p < 0.001) and energy adjusted DDC (β = 0.196; p < 0.001). Higher dietary cost is associated with healthy eating among Malaysian adults. PMID:28926947

Higher Dietary Cost Is Associated with Higher Diet Quality: A Cross-Sectional Study among Selected Malaysian Adults.

PubMed

Pondor, Ibnteesam; Gan, Wan Ying; Appannah, Geeta

2017-09-16

Food price is a determining factor of food choices; however its relationship with diet quality is unclear in Malaysia. This study aimed to examine socio-economic characteristics and daily dietary cost (DDC) in relation to diet quality in the state of Selangor, Malaysia. Dietary intake was assessed using a Food Frequency Questionnaire (FFQ) and diet quality was estimated using a Malaysian Healthy Eating Index (M-HEI). DDC in Malaysian Ringgit (RM) was calculated from dietary intake and national food prices. Linear regression models were fitted to determine associations between DDC and M-HEI scores and predictors of diet quality. The mean M-HEI score of respondents was 61.31 ± 10.88 and energy adjusted DDC was RM10.71/2000 kcal (USD 2.49). The highest quintile of adjusted DDC had higher M-HEI scores for all respondents (Q1: 57.14 ± 10.07 versus Q5: 63.26 ± 11.54, p = 0.001). There were also positive associations between DDC and M-HEI scores for fruits ( p < 0.001) and vegetables ( p = 0.017) for all respondents. Predictors of diet quality included carbohydrate (β = 0290; p < 0.001) and fat intakes (β = -0.242; p < 0.001) and energy adjusted DDC (β = 0.196; p < 0.001). Higher dietary cost is associated with healthy eating among Malaysian adults.

Changes to indoor air quality as a result of relocating families from slums to public housing

NASA Astrophysics Data System (ADS)

Burgos, Soledad; Ruiz, Pablo; Koifman, Rosalina

2013-05-01

One largely unstudied benefit of relocating families from slums to public housing is the potential improvement in indoor air quality (IAQ). We compared families that moved from slums to public housing with those that remained living in slums in Santiago, Chile in terms of fine particulate matter (PM2.5) as main indicator of change. A cross-sectional study of 98 relocated families and 71 still living in slums was carried out, obtaining indoor and outdoor samples by a Personal Environmental Monitor. Home characteristics, including indoor air pollution sources were collected through questionnaires. Multivariate regression models included the intervention (public housing or slum), indoor pollution sources, outdoor PM2.5 and family characteristics as predictors. Indoor PM2.5 concentrations were higher in slums (77.8 μg m-3 [SD = 35.7 μg m-3]) than in public housing (55.7 μg m-3 [SD = 34.6 μg m-3], p < 0.001). Differences between indoor and outdoor PM2.5 were significant only in the slum houses. The multivariate analysis showed that housing intervention significantly decreased indoor PM2.5 (10.4 μg m-3) after adjusting by the other predictors. Outdoor PM2.5 was the main predictor of indoor PM2.5. Other significant factors were water heating fuels and indoor smoking. Having infants 1-23 months was associated with a lowering of indoor PM2.5. Our results suggest that a public housing program that moves families from slums to public housing improves indoor air quality directly and also indirectly through air pollution sources.

Residential indoor PM2.5 in wood stove homes: follow-up of the Libby changeout program

PubMed Central

Noonan, Curtis W.; Navidi, William; Sheppard, Lianne; Palmer, Christopher P.; Bergauff, Megan; Hooper, Kathi; Ward, Tony J.

2012-01-01

In 2005 through 2008 a small rural mountain valley community engaged in a wood stove changeout program to address concerns of poor ambient air quality. During this program we assessed changes to indoor air quality before and after the introduction of a new, lower emission wood stove. We previously reported a greater than 70% reduction in indoor PM2.5 concentrations in homes following the installation of a new EPA-certified stove within the home. We report here on follow-up of the experiences in these and other homes over three winters of sample collection. In 21 homes, we compared pre-changeout PM2.5 concentrations (mean (sd) = 45.0 (33.0) μg/m3) to multiple post-changeout measures of PM2.5 concentrations using a DustTrak. The mean reduction (and 95% confidence interval) from pre-changeout to post-changeout was −18.5 μg/m3 (−31.9, −5.2), adjusting for ambient PM2.5, ambient temperature, and other factors. Findings across homes and across years were highly variable, and a subset of homes did not experience a reduction in PM2.5 following changeout. Reductions were also observed for organic carbon, elemental carbon, and levoglucosan, but increases were observed for dehydroabietic acid and abietic acid. Despite overall improvements in indoor air quality, the varied response across homes may be due to factors other than the introduction of a new wood stove. PMID:22607315

Quality of Life in Patients With Advanced Cancer: Differential Association With Performance Status and Systemic Inflammatory Response.

PubMed

Laird, Barry J A; Fallon, Marie; Hjermstad, Marianne J; Tuck, Sharon; Kaasa, Stein; Klepstad, Pål; McMillan, Donald C

2016-08-10

Quality of life is a key component of cancer care; however, the factors that determine quality of life are not well understood. The aim of this study was to examine the relationship between quality of life parameters, performance status (PS), and the systemic inflammatory response in patients with advanced cancer. An international biobank of patients with advanced cancer was analyzed. Quality of life was assessed at a single time point by using the European Organisation for Research and Treatment of Cancer Quality of Life Questionnaire C-30 (EORTC QLQ-C30). PS was assessed by using the Eastern Cooperative Oncology Group (ECOG) classification. Systemic inflammation was assessed by using the modified Glasgow Prognostic Score (mGPS), which combines C-reactive protein and albumin. The relationship between quality of life parameters, ECOG PS, and the mGPS was examined. Data were available for 2,520 patients, and the most common cancers were GI (585 patients [22.2%]) and pulmonary (443 patients [17.6%]). The median survival was 4.25 months (interquartile range, 1.36 to 12.9 months). Increasing mGPS (systemic inflammation) and deteriorating PS were associated with deterioration in quality-of-life parameters (P < .001). Increasing systemic inflammation was associated with deterioration in quality-of-life parameters independent of PS. Systemic inflammation was associated with quality-of-life parameters independent of PS in patients with advanced cancer. Further investigation of these relationships in longitudinal studies and investigations of possible effects of attenuating systemic inflammation are now warranted. © 2016 by American Society of Clinical Oncology.

Measurement of transepidermal water loss in localized scleroderma.

PubMed

Ďurčanská, Veronika; Jedličková, Hana; Vašků, Vladimír

2016-05-01

Localized scleroderma (LS) is a disease characterized by fibrotic changes in the dermis. Connective tissue growth factor and transforming growth factor β2 are the main mediators of fibrogenesis; this, along with excessive connective tissue production, affects epidermal keratinocytes, and thereby contributes to the changed quality of skin barrier. The objective of this article was to study the objective measurement of the skin barrier quality in LS with transepidermal water loss (TEWL) meter. The measurements of TEWL were performed on LS plaques in all three stages of various body locations. Control measurements were made on the contralateral side of healthy skin. The difference between TEWL in LS area and the contralateral side of the healthy skin was evaluated. A higher average TEWL 7.86 g/m(2) /h (SD 5.29) was observed on LS plaques compared with the control measurements on healthy skin 6.39 g/m(2) /h (SD 2.77). TEWL average values decreased from the inflammatory stage, through the sclerotic and to the atrophic stage. The mean difference 1.301 g/m(2) /h (SD 5.16) was found between TEWL on LS plaques and on the contralateral healthy skin in 82 measurements, i.e., a higher TEWL was observed in LS. The difference was statistically significant with p = 0.0250. Although fibrogenesis in scleroderma is localized in dermis, the skin barrier changes can be detected. © 2016 Wiley Periodicals, Inc.

Diode-end-pumped Ho, Pr:LiLuF₄ bulk laser at 2.95  μm.

PubMed

Nie, Hongkun; Zhang, Peixiong; Zhang, Baitao; Yang, Kejian; Zhang, Lianhan; Li, Tao; Zhang, Shuaiyi; Xu, Jianqiu; Hang, Yin; He, Jingliang

2017-02-15

A diode-end-pumped continuous-wave (CW) and passively Q-switched Ho, Pr:LiLuF₄ (Ho, Pr:LLF) laser operation at 2.95 μm was demonstrated for the first time, to the best of our knowledge. The maximum CW output power was 172 mW. By using a monolayer graphene as the saturable absorber, the passively Q-switched operation was realized, in which regimes with the highest output power, the shortest pulse duration, and the maximum repetition rate were determined to be 88 mW, 937.5 ns, and 55.7 kHz, respectively. The laser beam quality factor M² at the maximum CW output power were measured to be Mx2=1.48 and My2=1.47.

Study of factors affecting growth and cold acclimation of Vitis callus cultures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deng, L.

1987-01-01

In vitro grape tissue culture initiation, growth, and cold acclimation were studied. Factors involved were genotypes, media, plant growth regulators, age, light, temperature, antioxidant, clearing and adsorbing agents, sucrose level, osmotic potential, ABA, chilling and freezing treatments. Murashige and Skoog (MS) medium containing 1 ..mu..M 2,4-d + 0.1 uM Ba, MS containing 1 uM 2,4-D, and woody plant medium containing 1 uM 2,4-D + 0.1 uM BA produced abundant callus tissue for most grape genotypes; either WPM or MS containing 1 uM BA stimulated shoot growth in all the 12 genotypes tested. Adding 1 uM abscisic acid (ABA) to themore » B5 medium with 1 uM 2,4-D and 0.5 uM BA enhanced growth and quality of Chancellor callus. /sup 3/H-ABA was taken up actively by callus tissue at 12 days after subculture, but by 20 d this effect disappeared. When /sup 14/C-sucrose was added to the medium. /sup 14/C level of cells reached a plateau after 48 h; this plateau was higher if ABA was also present in the medium. Cells on media containing ABA were larger in size, lighter in color, and more loosely connected.« less

Quality Evaluation of Human Bone Marrow Mesenchymal Stem Cells for Cartilage Repair

PubMed Central

Shiraishi, Katsunori; Takeuchi, Shunsuke; Yanada, Shinobu; Mera, Hisashi; Wakitani, Shigeyuki; Adachi, Nobuo

2017-01-01

Quality evaluation of mesenchymal stem cells (MSCs) based on efficacy would be helpful for their clinical application. In this study, we aimed to find the factors of human bone marrow MSCs relating to cartilage repair. The expression profiles of humoral factors, messenger RNAs (mRNAs), and microRNAs (miRNAs) were analyzed in human bone marrow MSCs from five different donors. We investigated the correlations of these expression profiles with the capacity of the MSCs for proliferation, chondrogenic differentiation, and cartilage repair in vivo. The mRNA expression of MYBL1 was positively correlated with proliferation and cartilage differentiation. By contrast, the mRNA expression of RCAN2 and the protein expression of TIMP-1 and VEGF were negatively correlated with proliferation and cartilage differentiation. However, MSCs from all five donors had the capacity to promote cartilage repair in vivo regardless of their capacity for proliferation and cartilage differentiation. The mRNA expression of HLA-DRB1 was positively correlated with cartilage repair in vivo. Meanwhile, the mRNA expression of TMEM155 and expression of miR-486-3p, miR-148b, miR-93, and miR-320B were negatively correlated with cartilage repair. The expression analysis of these factors might help to predict the ability of bone marrow MSCs to promote cartilage repair. PMID:28835756

Impacts of stove use patterns and outdoor air quality on household air pollution and cardiovascular mortality in southwestern China.

PubMed

Snider, Graydon; Carter, Ellison; Clark, Sierra; Tseng, Joy Tzu Wei; Yang, Xudong; Ezzati, Majid; Schauer, James J; Wiedinmyer, Christine; Baumgartner, Jill

2018-05-04

Decades of intervention programs that replaced traditional biomass stoves with cleaner-burning technologies have failed to meet the World Health Organization (WHO) interim indoor air quality target of 35-μg m -3 for PM 2.5 . Many attribute these results to continued use of biomass stoves and poor outdoor air quality, though the relative impacts of these factors have not been empirically quantified. We measured 496 days of real-time stove use concurrently with outdoor and indoor air pollution (PM 2.5 ) in 150 rural households in Sichuan, China. The impacts of stove use patterns and outdoor air quality on indoor PM 2.5 were quantified. We also estimated the potential avoided cardiovascular mortality in southwestern China associated with transition from traditional to clean fuel stoves using established exposure-response relationships. Mean daily indoor PM 2.5 was highest in homes using both wood and clean fuel stoves (122 μg m -3 ), followed by exclusive use of wood stoves (106 μg m -3 ) and clean fuel stoves (semi-gasifiers: 65 μg m -3 ; gas or electric: 55 μg m -3 ). Wood stoves emitted proportionally higher indoor PM 2.5 during ignition, and longer stove use was not associated with higher indoor PM 2.5 . Only 24% of days with exclusive use of clean fuel stoves met the WHO indoor air quality target, though this fraction rose to 73% after subtracting the outdoor PM 2.5 contribution. Reduced PM 2.5 exposure through exclusive use of gas or electric stoves was estimated to prevent 48,000 yearly premature deaths in southwestern China, with greater reductions if local outdoor PM 2.5 is also reduced. Clean stove and fuel interventions are not likely to reduce indoor PM 2.5 to the WHO target unless their use is exclusive and outdoor air pollution is sufficiently low, but may still offer some cardiovascular benefits. Copyright © 2018. Published by Elsevier Ltd.

Coronary CT angiography with single-source and dual-source CT: comparison of image quality and radiation dose between prospective ECG-triggered and retrospective ECG-gated protocols.

PubMed

Sabarudin, Akmal; Sun, Zhonghua; Yusof, Ahmad Khairuddin Md

2013-09-30

This study is conducted to investigate and compare image quality and radiation dose between prospective ECG-triggered and retrospective ECG-gated coronary CT angiography (CCTA) with the use of single-source CT (SSCT) and dual-source CT (DSCT). A total of 209 patients who underwent CCTA with suspected coronary artery disease scanned with SSCT (n=95) and DSCT (n=114) scanners using prospective ECG-triggered and retrospective ECG-gated protocols were recruited from two institutions. The image was assessed by two experienced observers, while quantitative assessment was performed by measuring the image noise, the signal-to-noise ratio (SNR) and the contrast-to-noise ratio (CNR). Effective dose was calculated using the latest published conversion coefficient factor. A total of 2087 out of 2880 coronary artery segments were assessable, with 98.0% classified as of sufficient and 2.0% as of insufficient image quality for clinical diagnosis. There was no significant difference in overall image quality between prospective ECG-triggered and retrospective gated protocols, whether it was performed with DSCT or SSCT scanners. Prospective ECG-triggered protocol was compared in terms of radiation dose calculation between DSCT (6.5 ± 2.9 mSv) and SSCT (6.2 ± 1.0 mSv) scanners and no significant difference was noted (p=0.99). However, the effective dose was significantly lower with DSCT (18.2 ± 8.3 mSv) than with SSCT (28.3 ± 7.0 mSv) in the retrospective gated protocol. Prospective ECG-triggered CCTA reduces radiation dose significantly compared to retrospective ECG-gated CCTA, while maintaining good image quality. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Degradation in urban air quality from construction activity and increased traffic arising from a road widening scheme.

PubMed

Font, Anna; Baker, Timothy; Mudway, Ian S; Purdie, Esme; Dunster, Christina; Fuller, Gary W

2014-11-01

Road widening schemes in urban areas are often proposed as a solution to traffic congestion and as a means of stimulating economic growth. There is however clear evidence that new or expanded roads rapidly fill with either displaced or induced traffic, offsetting any short-term gains in eased traffic flows. What has not been addressed in any great detail is the impact of such schemes on air quality, with modelled impact predictions seldom validated by measurements after the expansion of road capacity. In this study we made use of a road widening project in London to investigate the impact on ambient air quality (particulate matter, NOX, NO2) during and after the completion of the road works. PM10 increased during the construction period up to 15 μg m(-3) during working hours compared to concentrations before the road works. A box modelling approach was used to determine a median emission factor of 0.0022 kg PM10 m(-2) month(-1), three times larger than that used in the UK emission inventory (0.0007 kg PM10 m(-2) month(-1)). Peaks of activity released 0.0130 kg PM10 m(-2) month(-1), three and eight times smaller than the peak values used in the European and US inventories. After the completion of the widening there was an increase in all pollutants from the road during rush hour: 2-4 μg m(-3) for PM10; 1 μg m(-3) for PM2.5; 40 and 8 μg m(-3) for NOX and NO2, respectively. NO2 EU Limit Value was breached after the road development illustrating a notable deterioration in residential air quality. Additionally, PM10, but not PM2.5, glutathione dependent oxidative potential increased after the road was widened consistent with an increase in pro-oxidant components in the coarse particle mode, related to vehicle abrasion processes. These increased air pollution indices were associated with an increase in the number of cars, taxis and LGVs. Copyright © 2014. Published by Elsevier B.V.

An argon ion beam milling process for native AlOx layers enabling coherent superconducting contacts

NASA Astrophysics Data System (ADS)

Grünhaupt, Lukas; von Lüpke, Uwe; Gusenkova, Daria; Skacel, Sebastian T.; Maleeva, Nataliya; Schlör, Steffen; Bilmes, Alexander; Rotzinger, Hannes; Ustinov, Alexey V.; Weides, Martin; Pop, Ioan M.

2017-08-01

We present an argon ion beam milling process to remove the native oxide layer forming on aluminum thin films due to their exposure to atmosphere in between lithographic steps. Our cleaning process is readily integrable with conventional fabrication of Josephson junction quantum circuits. From measurements of the internal quality factors of superconducting microwave resonators with and without contacts, we place an upper bound on the residual resistance of an ion beam milled contact of 50 mΩ μm2 at a frequency of 4.5 GHz. Resonators for which only 6% of the total foot-print was exposed to the ion beam milling, in areas of low electric and high magnetic fields, showed quality factors above 106 in the single photon regime, and no degradation compared to single layer samples. We believe these results will enable the development of increasingly complex superconducting circuits for quantum information processing.

Low-Loss Superconducting Nanowire Circuits Using a Neon Focused Ion Beam

NASA Astrophysics Data System (ADS)

Burnett, J.; Sagar, J.; Kennedy, O. W.; Warburton, P. A.; Fenton, J. C.

2017-07-01

We present low-temperature measurements of low-loss superconducting nanowire-embedded resonators in the low-power limit relevant for quantum circuits. The superconducting resonators are embedded with superconducting nanowires with widths down to 20 nm using a neon focused ion beam. In the low-power limit, we demonstrate an internal quality factor up to 3.9 ×105 at 300 mK [implying a two-level-system-limited quality factor up to 2 ×105 at 10 mK], not only significantly higher than in similar devices but also matching the state of the art of conventional Josephson-junction-embedded resonators. We also show a high sensitivity of the nanowire to stray infrared photons, which is controllable by suitable precautions to minimize stray photons in the sample environment. Our results suggest that there are excellent prospects for superconducting-nanowire-based quantum circuits.

High-pulse energy Q-switched Tm3+:YAG laser for nonlinear frequency conversion to the mid-IR

NASA Astrophysics Data System (ADS)

Stöppler, Georg; Kieleck, Christelle; Eichhorn, Marc

2010-10-01

For some medical fields in laser surgery and as a pump source for nonlinear materials to generate mid-IR radiation, e.g. for countermeasure applications, it is very useful to have a solid-state laser with high pulse energy at 2 μm. The rare earth ion Thulium offers a cross relaxation and can thus be directly diode pumped with common laser diodes around 800 nm for an efficient pumping. However, it was not considered for high pulse energy operation due to the high saturation fluence of around 62 J/cm2 at 2 μm. A limiting factor has always been the damage threshold of the optical elements inside the cavity. One of the reasons is the strong thermal lens of YAG, which affects a change of the beam radius inside the resonator and additionally degrades the beam quality with increasing pump power. Using a new pump geometry of the Tm3+:YAG laser system, it is now possible to reach pulse energies > 13 mJ at a diffraction limited beam quality of M2 < 1.1. The Q-switched Tm3+:YAG laser system uses an AOM operating at 100 Hz and will be described in detail. Due to the high pulse energy and very good beam quality, this laser is very interesting for nonlinear parametric frequency conversion.

Number of knee and ankle injuries is associated with poor physical but not mental health.

PubMed

Bruce, Casey M; Gribble, Phillip A; Turner, Michael J; Hubbard-Turner, Tricia; Simon, Janet E; Thomas, Abbey C

2017-05-01

The knee and ankle are among the most commonly injured joints in the body. Long-term strength and neuromuscular control deficits are common following these injuries, yielding lifelong disability and poor quality of life. However, it is unknown how the number of injuries sustained influences quality of life. Determine the association between the number of ankle or knee injuries sustained and physical and mental quality of life. A total of 806 ankle-injured (age:45.2 ± 15.3 yrs; body mass index [BMI]:28.6 ± 7.4 kg/m 2 ), 658 knee-injured (age:49.3 ± 16.1 yrs; BMI:28.4 ± 7.4 kg/m 2 ), and 996 uninjured (age:43.4 ± 16.1 yrs; BMI:26.9 ± 6.5 kg/m 2 ) adults completed the SF-8 survey to determine the physical (PCS) and mental (MCS) contributions to quality of life. Respondents were categorized by injury history (ankle, knee, none) and number of injuries (0, 1, 2, or 3 or more [3+]) to the same joint. Backward linear regression models were used to determine the association between quality of life, age, and injury history separately for SF-8 PCS and MCS, as well as ankle versus knee injury. Reporting 1, 2, or 3+ ankle injuries along with age predicted SF-8 PCS (P < 0.001). Further, 1 or 2 ankle injuries and age (P < 0.001) predicted SF-8 MCS. Reporting 1, 2, or 3+ knee injuries along with age significantly predicted SF-8 PCS (P < 0.001). Age, but not knee injury history, significantly predicted SF-8 MCS (P < 0.001). Current age and history of sustaining at least one injury negatively impact physical quality of life following either a knee or ankle injury. However, mental quality of life was predicted most consistently by age. Efforts to reduce injuries should be employed to improve quality of life, but more research is needed to determine what other factors contribute to quality of life across the lifespan.

A 3.2-GHz fully integrated low-phase noise CMOS VCO with self-biasing current source for the IEEE 802.11a/hiperLAN WLAN standard

NASA Astrophysics Data System (ADS)

Quemada, C.; Adin, I.; Bistue, G.; Berenguer, R.; Mendizabal, J.

2005-06-01

A 3.3V, fully integrated 3.2-GHz voltage-controlled oscillator (VCO) is designed in a 0.18μm CMOS technology for the IEE 802.11a/HiperLAN WLAN standard for the UNII band from 5.15 to 5.35 GHz. The VCO is tunable between 2.85 GHz and 3.31 GHz. NMOS architecture with self-biasing current of the tank source is chosen. A startup circuit has been employed to avoid zero initial current. Current variation is lower than 1% for voltage supply variations of 10%. The use of a self-biasing current source in the tank provides a greater safety in the transconductance value and allows running along more extreme point operation The designed VCO displays a phase noise and output power of -98dBc/Hz (at 100 KHz offset frequency) and 0dBm respectively. This phase noise has been obtained with inductors of 2.2nH and quality factor of 12 at 3.2 GHz, and P-N junction varactors whose quality factor is estimated to exceed 40 at 3.2 GHz. These passive components have been fabricated, measured and modeled previously. The core of the VCO consumes 33mW DC power.

Psychosocial work environment factors and weight change: a prospective study among Danish health care workers.

PubMed

Gram Quist, Helle; Christensen, Ulla; Christensen, Karl Bang; Aust, Birgit; Borg, Vilhelm; Bjorner, Jakob B

2013-01-17

Lifestyle variables may serve as important intermediate factors between psychosocial work environment and health outcomes. Previous studies, focussing on work stress models have shown mixed and weak results in relation to weight change. This study aims to investigate psychosocial factors outside the classical work stress models as potential predictors of change in body mass index (BMI) in a population of health care workers. A cohort study, with three years follow-up, was conducted among Danish health care workers (3982 women and 152 men). Logistic regression analyses examined change in BMI (more than +/- 2 kg/m(2)) as predicted by baseline psychosocial work factors (work pace, workload, quality of leadership, influence at work, meaning of work, predictability, commitment, role clarity, and role conflicts) and five covariates (age, cohabitation, physical work demands, type of work position and seniority). Among women, high role conflicts predicted weight gain, while high role clarity predicted both weight gain and weight loss. Living alone also predicted weight gain among women, while older age decreased the odds of weight gain. High leadership quality predicted weight loss among men. Associations were generally weak, with the exception of quality of leadership, age, and cohabitation. This study of a single occupational group suggested a few new risk factors for weight change outside the traditional work stress models.

Psychometric Properties of the Persian Translation of the Sexual Quality of Life–Male Questionnaire

PubMed Central

Maasoumi, Raziyeh; Mokarami, Hamidreza; Nazifi, Morteza; Stallones, Lorann; Taban, Abrahim; Yazdani Aval, Mohsen; Samimi, Kazem

2016-01-01

Sexual dysfunction has been demonstrated to be related to a poor quality of life. These dysfunctions are especially prevalent among men. This cross-sectional study aimed to investigate the psychometric properties of the Persian translation of the Sexual Quality of Life–Male (SQOL-M), translated and adapted to measure sexual quality of life among Iranian men. Forward–backward procedures were applied in translating the original SQOL-M into Persian, and then the psychometric properties of the Persian translation of the SQOL-M were studied. A total of 181 participants (23-60 years old) were included in the study. Validity was assessed by construct validity using confirmatory factor analysis, convergent validity, and content validity. The international index of erectile function (IIEF) and the work ability index were used to study the convergent validity. Reliability was evaluated through internal consistency and test–retest reliability analyses. The results from confirmatory factor analysis confirmed a one-factor solution for the Persian version of the SQOL-M. Content validity of the translated measure was endorsed by 10 specialists. Pearson correlations indicated that work ability index score, dimensions of the IIEF, and the IIEF total score were positively correlated with the Persian version of the SQOL-M (p < .001). Reliability evaluation indicated a high internal consistency and test–retest reliability. The Cronbach’s alpha coefficient and intraclass correlation coefficients were .96 and .95, respectively. Results indicated that the Persian version of the SQOL-M has good to excellent psychometric properties and can be used to assess the sexual quality of life among Iranian men. PMID:26856758

Psychometric Properties of the Persian Translation of the Sexual Quality of Life-Male Questionnaire.

PubMed

Maasoumi, Raziyeh; Mokarami, Hamidreza; Nazifi, Morteza; Stallones, Lorann; Taban, Abrahim; Yazdani Aval, Mohsen; Samimi, Kazem

2017-05-01

Sexual dysfunction has been demonstrated to be related to a poor quality of life. These dysfunctions are especially prevalent among men. This cross-sectional study aimed to investigate the psychometric properties of the Persian translation of the Sexual Quality of Life-Male (SQOL-M), translated and adapted to measure sexual quality of life among Iranian men. Forward-backward procedures were applied in translating the original SQOL-M into Persian, and then the psychometric properties of the Persian translation of the SQOL-M were studied. A total of 181 participants (23-60 years old) were included in the study. Validity was assessed by construct validity using confirmatory factor analysis, convergent validity, and content validity. The international index of erectile function (IIEF) and the work ability index were used to study the convergent validity. Reliability was evaluated through internal consistency and test-retest reliability analyses. The results from confirmatory factor analysis confirmed a one-factor solution for the Persian version of the SQOL-M. Content validity of the translated measure was endorsed by 10 specialists. Pearson correlations indicated that work ability index score, dimensions of the IIEF, and the IIEF total score were positively correlated with the Persian version of the SQOL-M ( p < .001). Reliability evaluation indicated a high internal consistency and test-retest reliability. The Cronbach's alpha coefficient and intraclass correlation coefficients were .96 and .95, respectively. Results indicated that the Persian version of the SQOL-M has good to excellent psychometric properties and can be used to assess the sexual quality of life among Iranian men.

Journey of oocyte from metaphase-I to metaphase-II stage in mammals.

PubMed

Sharma, Alka; Tiwari, Meenakshi; Gupta, Anumegha; Pandey, Ashutosh N; Yadav, Pramod K; Chaube, Shail K

2018-08-01

In mammals, journey from metaphase-I (M-I) to metaphase-II (M-II) is important since oocyte extrude first polar body (PB-I) and gets converted into haploid gamete. The molecular and cellular changes associated with meiotic cell cycle progression from M-I to M-II stage and extrusion of PB-I remain ill understood. Several factors drive oocyte meiosis from M-I to M-II stage. The mitogen-activated protein kinase3/1 (MAPK3/1), signal molecules and Rho family GTPases act through various pathways to drive cell cycle progression from M-I to M-II stage. The down regulation of MOS/MEK/MAPK3/1 pathway results in the activation of anaphase-promoting complex/cyclosome (APC/C). The active APC/C destabilizes maturation promoting factor (MPF) and induces meiotic resumption. Several signal molecules such as, c-Jun N-terminal kinase (JNK2), SENP3, mitotic kinesin-like protein 2 (MKlp2), regulator of G-protein signaling (RGS2), Epsin2, polo-like kinase 1 (Plk1) are directly or indirectly involved in chromosomal segregation. Rho family GTPase is another enzyme that along with cell division cycle (Cdc42) to form actomyosin contractile ring required for chromosomal segregation. In the presence of origin recognition complex (ORC4), eccentrically localized haploid set of chromosomes trigger cortex differentiation and determine the division site for polar body formation. The actomyosin contractile activity at the site of division plane helps to form cytokinetic furrow that results in the formation and extrusion of PB-I. Indeed, oocyte journey from M-I to M-II stage is coordinated by several factors and pathways that enable oocyte to extrude PB-I. Quality of oocyte directly impact fertilization rate, early embryonic development, and reproductive outcome in mammals. © 2018 Wiley Periodicals, Inc.

Optimisation of radiation dose and image quality in mobile neonatal chest radiography.

PubMed

Hinojos-Armendáriz, V I; Mejía-Rosales, S J; Franco-Cabrera, M C

2018-05-01

To optimise the radiation dose and image quality for chest radiography in the neonatal intensive care unit (NICU) by increasing the mean beam energy. Two techniques for the acquisition of NICU AP chest X-ray images were compared for image quality and radiation dose. 73 images were acquired using a standard technique (56 kV, 3.2 mAs and no additional filtration) and 90 images with a new technique (62 kV, 2 mAs and 2 mm Al filtration). The entrance surface air kerma (ESAK) was measured using a phantom and compared between the techniques and against established diagnostic reference levels (DRL). Images were evaluated using seven image quality criteria independently by three radiologists. Images quality and radiation dose were compared statistically between the standard and new techniques. The maximum ESAK for the new technique was 40.20 μGy, 43.7% of the ESAK of the standard technique. Statistical evaluation demonstrated no significant differences in image quality between the two acquisition techniques. Based on the techniques and acquisition factors investigated within this study, it is possible to lower the radiation dose without any significant effects on image quality by adding filtration (2 mm Al) and increasing the tube potential. Such steps are relatively simple to undertake and as such, other departments should consider testing and implementing this dose reduction strategy within clinical practice where appropriate. Copyright © 2017 The College of Radiographers. Published by Elsevier Ltd. All rights reserved.

Maternally inherited npm2 mRNA is crucial for egg developmental competence in zebrafish.

PubMed

Bouleau, Aurélien; Desvignes, Thomas; Traverso, Juan Martin; Nguyen, Thaovi; Chesnel, Franck; Fauvel, Christian; Bobe, Julien

2014-08-01

The molecular mechanisms underlying and determining egg developmental competence remain poorly understood in vertebrates. Nucleoplasmin (Npm2) is one of the few known maternal effect genes in mammals, but this maternal effect has never been demonstrated in nonmammalian species. A link between developmental competence and the abundance of npm2 maternal mRNA in the egg was previously established using a teleost fish model for egg quality. The importance of maternal npm2 mRNA for egg developmental competence remains unknown in any vertebrate species. In the present study, we aimed to characterize the contribution of npm2 maternal mRNA to early developmental success in zebrafish using a knockdown strategy. We report here the oocyte-specific expression of npm2 and maternal inheritance of npm2 mRNA in zebrafish eggs. The knockdown of the protein translated from this maternal mRNA results in developmental arrest before the onset of epiboly and subsequent embryonic death, a phenotype also observed in embryos lacking zygotic transcription. Npm2 knockdown also results in impaired transcription of the first-wave zygotic genes. Our results show that npm2 is also a maternal effect gene in a nonmammalian vertebrate species and that maternally inherited npm2 mRNA is crucial for egg developmental competence. We also show that de novo protein synthesis from npm2 maternal mRNA is critical for developmental success beyond the blastula stage and required for zygotic genome activation. Finally, our results suggest that npm2 maternal mRNA is an important molecular factor of egg quality in fish and possibly in all vertebrates. © 2014 by the Society for the Study of Reproduction, Inc.

Quality factor and dose equivalent investigations aboard the Soviet Space Station Mir

NASA Astrophysics Data System (ADS)

Bouisset, P.; Nguyen, V. D.; Parmentier, N.; Akatov, Ia. A.; Arkhangel'Skii, V. V.; Vorozhtsov, A. S.; Petrov, V. M.; Kovalev, E. E.; Siegrist, M.

1992-07-01

Since Dec 1988, date of the French-Soviet joint space mission 'ARAGATZ', the CIRCE device, had recorded dose equivalent and quality factor values inside the Mir station (380-410 km, 51.5 deg). After the initial gas filling two years ago, the low pressure tissue equivalent proportional counter is still in good working conditions. Some results of three periods are presented. The average dose equivalent rates measured are respectively 0.6, 0.8 and 0.6 mSv/day with a quality factor equal to 1.9. Some detailed measurements show the increasing of the dose equivalent rates through the SAA and near polar horns. The real time determination of the quality factors allows to point out high linear energy transfer events with quality factors in the range 10-20.

A proposed methodology for impact assessment of air quality traffic-related measures: The case of PM2.5 in Beijing.

PubMed

Fontes, Tânia; Li, Peilin; Barros, Nelson; Zhao, Pengjun

2018-08-01

Air quality traffic-related measures have been implemented worldwide to control the pollution levels of urban areas. Although some of those measures are claiming environmental improvements, few studies have checked their real impact. In fact, quantitative estimates are often focused on reducing emissions, rather than on evaluating the actual measures' effect on air quality. Even when air quality studies are conducted, results are frequently unclear. In order to properly assess the real impact on air quality of traffic-related measures, a statistical method is proposed. The method compares the pollutant concentration levels observed after the implementation of a measure with the concentration values of the previous year. Short- and long-term impact is assessed considering not only their influence on the average pollutant concentration, but also on its maximum level. To control the effect of the main confounding factors, only the days with similar environmental conditions are analysed. The changeability of the key meteorological variables that affect the transport and dispersion of the pollutant studied are used to identify and group the days categorized as similar. Resemblance of the pollutants' concentration of the previous day is also taken into account. The impact of the road traffic measures on the air pollutants' concentration is then checked for those similar days using specific statistical functions. To evaluate the proposed method, the impact on PM 2.5 concentrations of two air quality traffic-related measures (M1 and M2) implemented in the city of Beijing are taken into consideration: M1 was implemented in 2009, restricting the circulation of yellow-labelled vehicles, while M2 was implemented in 2014, restricting the circulation of heavy-duty vehicles. To compare the results of each measure, a time-period when these measures were not applied is used as case-control. Copyright © 2018 Elsevier Ltd. All rights reserved.

Comparison of CIGS solar cells made with different structures and fabrication techniques

DOE PAGES

Mansfield, Lorelle M.; Garris, Rebekah L.; Counts, Kahl D.; ...

2016-11-03

Cu(In, Ga)Se2 (CIGS)-based solar cells from six fabricators were characterized and compared. The devices had differing substrates, absorber deposition processes, buffer materials, and contact materials. The effective bandgaps of devices varied from 1.05 to 1.22 eV, with the lowest optical bandgaps occurring in those with metal-precursor absorber processes. Devices with Zn(O, S) or thin CdS buffers had quantum efficiencies above 90% down to 400 nm. Most voltages were 250-300 mV below the Shockley-Queisser limit for their bandgap. Electroluminescence intensity tracked well with the respective voltage deficits. Fill factor (FF) was as high as 95% of the maximum for each device'smore » respective current and voltage, with higher FF corresponding to lower diode quality factors (~1.3). An in-depth analysis of FF losses determined that diode quality reflected in the quality factor, voltage-dependent photocurrent, and, to a lesser extent, the parasitic resistances are the limiting factors. As a result, different absorber processes and device structures led to a range of electrical and physical characteristics, yet this investigation showed that multiple fabrication pathways could lead to high-quality and high-efficiency solar cells.« less

Comparison of CIGS solar cells made with different structures and fabrication techniques

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mansfield, Lorelle M.; Garris, Rebekah L.; Counts, Kahl D.

Cu(In, Ga)Se2 (CIGS)-based solar cells from six fabricators were characterized and compared. The devices had differing substrates, absorber deposition processes, buffer materials, and contact materials. The effective bandgaps of devices varied from 1.05 to 1.22 eV, with the lowest optical bandgaps occurring in those with metal-precursor absorber processes. Devices with Zn(O, S) or thin CdS buffers had quantum efficiencies above 90% down to 400 nm. Most voltages were 250-300 mV below the Shockley-Queisser limit for their bandgap. Electroluminescence intensity tracked well with the respective voltage deficits. Fill factor (FF) was as high as 95% of the maximum for each device'smore » respective current and voltage, with higher FF corresponding to lower diode quality factors (~1.3). An in-depth analysis of FF losses determined that diode quality reflected in the quality factor, voltage-dependent photocurrent, and, to a lesser extent, the parasitic resistances are the limiting factors. As a result, different absorber processes and device structures led to a range of electrical and physical characteristics, yet this investigation showed that multiple fabrication pathways could lead to high-quality and high-efficiency solar cells.« less

Self-focusing and group-velocity dispersion of pulsed laser beams in the inhomogeneous atmosphere.

PubMed

Zhang, Yuqiu; Ji, Xiaoling; Zhang, Hao; Li, Xiaoqing; Wang, Tao; Wang, Huan; Deng, Yu

2018-05-28

We study self-focusing and group-velocity dispersion (GVD) effects in the inhomogeneous atmosphere on pulsed-laser space debris removal facilitated by a ground-based laser. It is found that changes of the pulse duration and the beam spot size with the propagation distance are noticeable due to the interplay of the GVD effect and the self-focusing effect, which is quite different from the behavior in the linear case. It is shown that the temporal pulse splitting may appear on the space debris, and the spatial side lobe usually appears together with the temporal pulse splitting. As compared with the linear case, the beam width and the pulse width on the debris target increase. On the other hand, crucial formulae of the modified focal length and the M 2 -factor for laser debris removal are also derived. It is found that the beam quality on the debris target becomes better if our modified focal length is adopted, and the beam quality on the debris target will be good if the value of M 2 -factor is less than 1.6.

Test Result of 650 MHz, Beta 0.61 Single Cell Niobium Cavity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seth, Sudeshna; Bhattacharyya, Pranab; Dutta Gupta, Anjan

VECC has been involved in the design, analysis and development of 650 MHz, beta 0.61 (LB650), elliptical Superconducting RF linac cavity, as part of research and development activities on SRF cavities and associated technologies under Indian Institutions Fermilab Collaboration (IIFC). A single-cell niobium cavity has been indigenously designed and developed at VECC, with the help of Electron Beam Welding (EBW) facility at IUAC, New Delhi. Various measurements, processing and testing at 2K in Vertical Test Stand (VTS) of the single-cell cavity was carried out at ANL and Fermilab, USA, with active participation of VECC engineers. It achieved a maximum acceleratingmore » gradient(Eacc) of 34.5 MV/m with Quality Factor of 2·10⁹ and 30 MV/m with Quality Factor of 1.5·10¹⁰. This is probably the highest accelerating gradient achieved so far in the world for LB650 cavities. This paper describes the design, fabrication and measurement of the single cell niobium cavity. Cavity processing and test results of Vertical Test of the single-cell niobium cavity are also presented.« less

Breakfast Skipping, Anxiety, Exercise, and Soda Consumption are Associated with Diet Quality in Mexican College Students.

PubMed

Hall, Laura; Tejada-Tayabas, Luz María; Monárrez-Espino, Joel

2017-01-01

ABSTEACT Despite the reported poor dietary habits and risk of weight gain in college students, they remain understudied in Mexico. Mexican college students are in a rapidly changing economic environment; a shift from a traditional, homemade cuisine to a diet more heavily influenced by an industrialized culture seems to be occurring, potentially affecting the quality of their dietary intake. A health and nutrition survey was conducted among 450 Mexican college students to study the relationship between sociodemographic factors and diet quality. Dietary data were used to build macro- and micronutrient scores, dichotomized as low and normal quality. Adjusted odds (OR [95% CI]) were computed to determine the probability of low dietary quality. Breakfast skipping (5.3 [1.2, 22.7]) and risk of anxiety (2.3 [1.3, 4.4]) were associated with a greater risk of low macronutrient quality, and caloric intake < 1,800 kcal (5.8 [3.5, 9.7]), breakfast skipping (3.7 [1.4, 10.3]), vigorous exercise ≤ 1 h/wk (2.6 [1.3, 5.2]), and soda consumption > 250 mL/d (2.0 [1.2, 3.3]) with low micronutrient quality.

Low-frequency centroid-moment-tensor inversion from superconducting-gravimeter data: The effect of seismic attenuation

NASA Astrophysics Data System (ADS)

Zábranová, Eliška; Matyska, Ctirad

2014-10-01

After the 2010 Maule and 2011 Tohoku earthquakes the spheroidal modes up to 1 mHz were clearly registered by the Global Geodynamic Project (GGP) network of superconducting gravimeters (SG). Fundamental parameters in synthetic calculations of the signals are the quality factors of the modes. We study the role of their uncertainties in the centroid-moment-tensor (CMT) inversions. First, we have inverted the SG data from selected GGP stations to jointly determine the quality factors of these normal modes and the three low-frequency CMT components, Mrr,(Mϑϑ-Mφφ)/2 and Mϑφ, that generate the observed SG signal. We have used several-days-long records to minimize the trade-off between the quality factors and the CMT but it was not eliminated completely. We have also inverted each record separately to get error estimates of the obtained parameters. Consequently, we have employed the GGP records of 60-h lengths for several published modal-quality-factor sets and inverted only the same three CMT components. The obtained CMT tensors are close to the solution from the joint Q-CMT inversion of longer records and resulting variability of the CMT components is smaller than differences among routine agency solutions. Reliable low-frequency CMT components can thus be obtained for any quality factors from the studied sets.

Improvement of fatigue in patients with rheumatoid arthritis treated with biologics: relationship with sleep disorders, depression and clinical efficacy. A prospective, multicentre study.

PubMed

Genty, Marlène; Combe, Bernard; Kostine, Marie; Ardouin, Elodie; Morel, Jacques; Lukas, Cédric

2017-01-01

To assess predictive factors of improvement in related fatigue in rheumatoid arthritis (RA) patients newly receiving biologic therapy, and specifically the influence of the improvement of the quality of sleep. We conducted a multicentre prospective study in RA patients requiring initiation or change of biologic therapy. The improvement in fatigue, sleep disorders and depression was assessed respectively by the FACIT fatigue scale, Spiegel scale and Beck Depression Inventory at inclusion (M0) and 3 months (M3) after the beginning of treatment. Potential confounders were assessed and adjusted for. The association between evolution of fatigue and other characteristics were evaluated by univariate (χ2) then multivariate (logistic regression) analyses. We followed-up 99 patients. FACIT scores at M0 revealed frequently reported fatigue: 89%, high prevalence of sleep disorders: 95% and depression: 67%. Improvement of fatigue, sleep quality and depression was observed in 58.6%, 26.3% and 34.3% of cases, respectively. Significant factors associated with an improvement in fatigue at M3 were an elevated sedimentation rate at M0 (OR=5.7[2.0-16.0], p=0.001) and a favourable EULAR response at M3 (OR=4.8[1.6-14.8], p=0.006). Furthermore, a number of swollen joints > 5 at baseline (OR=0.3 [0.1-0.8]) and the use of psychotropic drugs (OR=0.2[0.04-0.9]) were predictive of an absence of improvement in fatigue. No significant association with the improvement in sleep disorders could be demonstrated. Fatigue in RA is improved by effective treatment, via decreasing disease activity. Improvement of sleep disorders is more likely a surrogate of therapeutic efficiency rather than an independent outcome.

Influence of non-Kolmogorov atmospheric turbulence on the beam quality of vortex beams.

PubMed

Li, Jinhong; Wang, Weiwei; Duan, Meiling; Wei, Jinlin

2016-09-05

Based on the extended Huygens-Fresnel principle and the definition of second-order moments of the Wigner distribution function (WDF), the analytical expressions for the propagation factors (M²-factors) and Strehl ratio S_R of the Gaussian Schell-model (GSM) vortex beams and GSM non-vortex beams propagation through non-Kolmogorov atmospheric turbulence are derived, and used to study the influence of non-Kolmogorov atmospheric turbulence on beam quality of the GSM vortex beams. It is shown that the smaller the generalized structure constant and the outer scale of turbulence are, and the bigger the inner scale of turbulence is, the smaller the normalized propagation factor is, the bigger the Strehl ratio is, and the better the beam quality of GSM vortex beams in atmospheric turbulence is. The variation of beam quality with the generalized exponent α is nonmonotonic, when α = 3.11, the beam quality of the GSM vortex beams is the poorest through non-Kolmogorov atmospheric turbulence. GSM vortex beams is less affected by turbulence than GSM non-vortex beams under certain condition, and will be useful in long-distance free-space optical communications.

Virtual reality exercise on a home-based phase III cardiac rehabilitation program, effect on executive function, quality of life and depression, anxiety and stress: a randomized controlled trial.

PubMed

Vieira, Ágata; Melo, Cristina; Machado, Jorge; Gabriel, Joaquim

2018-02-01

To analyse the effect of a six-month home-based phase III cardiac rehabilitation (CR) specific exercise program, performed in a virtual reality (Kinect) or conventional (booklet) environment, on executive function, quality of life and depression, anxiety and stress of subjects with coronary artery disease. A randomized controlled trial was conducted with subjects, who had completed phase II, randomly assigned to intervention group 1 (IG1), whose program encompassed the use of Kinect (n = 11); or intervention group 2 (IG2), a paper booklet (n = 11); or a control group (CG), only subjected to the usual care (n = 11). The three groups received education on cardiovascular risk factors. The assessed parameters, at baseline (M0), 3 (M1) and 6 months (M2), were executive function, control and integration in the implementation of an adequate behaviour in relation to a certain objective, specifically the ability to switch information (Trail Making Test), working memory (Verbal Digit Span test), and selective attention and conflict resolution ability (Stroop test), quality of life (MacNew questionnaire) and depression, anxiety and stress (Depression, Anxiety and Stress Scale 21). Descriptive and inferential statistical measures were used, significance level was set at .05. The IG1 revealed significant improvements, in the selective attention and conflict resolution ability, in comparison with the CG in the variable difference M0 - M2 (p = .021) and in comparison with the IG2 in the variable difference M1 - M2 and M0 - M2 (p = .001 and p = .002, respectively). No significant differences were found in the quality of life, and depression, anxiety and stress. The virtual reality format had improved selective attention and conflict resolution ability, revealing the potential of CR, specifically with virtual reality exercise, on executive function. Implications for Rehabilitation In cardiac rehabilitation, especially in phase III, it is important to develop and to present alternative strategies, as virtual reality using the Kinect in a home context. Taking into account the relationship between the improvement of the executive function with physical exercise, it is relevant to access the impact of a cardiac rehabilitation program on the executive function. Enhancing the value of the phase III of cardiac rehabilitation.

Caregiving for Parkinson's disease patients: an exploration of a stress-appraisal model for quality of life and burden.

PubMed

Goldsworthy, Belinda; Knowles, Simon

2008-11-01

Extending the 2002 stress-appraisal model of Chappell and Reid, we examined the relationships between caregiver stressors (e.g., cognitive impairment and functional dependency of the recipient), appraisal (informal hours of caregiving), and protective factors (e.g., social support, self-esteem, and quality of the caregiver-recipient relationship) associated with the burden and quality of life of Parkinson's disease caregivers. There were 136 caregivers (M = 64.59 years) who completed an online survey. Using structural equation modeling, we found that the extended stress-appraisal model of Chappell and Reid provided a good fit to the data (chi2 = 67.87, df = 55, p >.05; chi2/df = 1.23, Comparative Fit Index = 0.98, Root Mean Square Error of Approximation = 0.04). This study provides an important contribution to a growing field of research that applies theoretical models to investigate the stressors, appraisals, and protective factors that impact caregiver well-being.

Air quality of Beijing (China) and Delhi (India) and impact on Human Health and Climate in Asia

NASA Astrophysics Data System (ADS)

Zheng, S.; Singh, R. P.; Wu, Y.; Wu, C.

2015-12-01

Air pollution has been estimated to represent a significant fraction of the total mortality attributable to 26 risk factors assessed by the World Health Organization global burden of disease project. Delhi is distributed over 1484 km2 with population density of 11297/km2 (as in 2011) and surrounded by highly industrialized National Capital region (NCR) with population density of 1050/km2. Beijing covers an area of 16,800 km2, with population density of 1300/km2 (upto 2014). It is located at the foothills of Yan Mountains and Taihang Mountains, in the North China Plain. Both these cities suffer with poor air quality and are severely affected by dense haze, fog and smog during summer and winter seasons. Earlier studies in developing countries have concentrated on limited air quality parameters. Detailed results from trace gases (O3, NO, NO2, and CO) and particulate matter (PM10 and PM2.5) in two Asian megacities, Delhi (India) and Beijing (China), will be presented. Trace gases and particulate matter in Beijing were collected at 31 sites during 2013-2014. The measurements in Delhi were carried out at 8 sites during October 2010 - March 2013. The annual average of PM10, PM2.5, O3, NO, NO2, and CO over Delhi in 2013 is 199 ug/m3, 123 ug/m3, 25.6 ppb, 21.5 ppb, 15.8 ppb, 1.7 ppb, respectively. The annual average of PM10, PM2.5, O3, NO2, CO, and SO2 over Beijing is 113 ug/m3, 85 ug/m3, 51 ug/m3, 46 ug/m3, 1.3 mg/m3, 23 ug/m3, respectively. The annual and seasonal variations of trace gases and particulate matter in Beijing and Delhi are also analyzed, as well as spatial changes of air pollution in these two cities. A comparative analysis in these two cities and the sources of pollution and their impact on human health and Asian climate will be discussed.

Immunological quality and performance of tumor vessel-targeting CAR-T cells prepared by mRNA-EP for clinical research

PubMed Central

Inoo, Kanako; Inagaki, Ryo; Fujiwara, Kento; Sasawatari, Shigemi; Kamigaki, Takashi; Nakagawa, Shinsaku; Okada, Naoki

2016-01-01

We previously reported that tumor vessel-redirected T cells, which were genetically engineered with chimeric antigen receptor (CAR) specific for vascular endothelial growth factor receptor 2 (VEGFR2), demonstrated significant antitumor effects in various murine solid tumor models. In the present study, we prepared anti-VEGFR2 CAR-T cells by CAR-coding mRNA electroporation (mRNA-EP) and analyzed their immunological characteristics and functions for use in clinical research. The expression of anti-VEGFR2 CAR on murine and human T cells was detected with approximately 100% efficiency for a few days, after peaking 6–12 hours after mRNA-EP. Triple transfer of murine anti-VEGFR2 CAR-T cells into B16BL6 tumor-bearing mice demonstrated an antitumor effect comparable to that for the single transfer of CAR-T cells engineered with retroviral vector. The mRNA-EP did not cause any damage or defects to human T-cell characteristics, as determined by viability, growth, and phenotypic parameters. Additionally, two kinds of human anti-VEGFR2 CAR-T cells, which expressed different CAR construction, differentiated to effector phase with cytokine secretion and cytotoxic activity in antigen-specific manner. These results indicate that our anti-VEGFR2 CAR-T cells prepared by mRNA-EP have the potential in terms of quality and performance to offer the prospect of safety and efficacy in clinical research as cellular medicine. PMID:27909701

Characteristic analysis of a polarization output coupling Porro prism resonator

NASA Astrophysics Data System (ADS)

Yang, Hailong; Meng, Junqing; Chen, Weibiao

2015-02-01

An Electro-optical Q-switched Nd:YAG slab laser with a crossed misalignment Porro prism resonator for space applications has been theoretically and experimentally investigated. The phase shift induced by the combination of different wave plates and Porro prism azimuth angles have been studied for creating high loss condition prior to Q-switching. The relationship of the effective output coupling reflectivity and the employed Q-switch driving voltage is explored by using Jones matrix optics. In the experiment, the maximum output pulse energy of 93 mJ with 14-ns pulse duration is obtained at the repetition rate of 20 Hz and the optical-to-optical conversion efficiency is 16.8%. The beam quality factors are M 2 x = 2.5 and M 2y = 2.2, respectively.

Analysis of carbon monoxide (CO) with Delhi Finite Line Source (DFLS) in MT Haryono Street, Medan City

NASA Astrophysics Data System (ADS)

Turmuzi, M.; Suryati, I.; Mashaly, E. T.; Batubara, F.

2018-02-01

One source to decrease urban air ambient quality is transportation sector. Important pollutants are released by gas emissions from vehicles are carbon monoxide (CO), hydrocarbons (HC), nitrogen dioxide (NO2), particulate matter and others. The presence of CO pollutants in the ambient air can be predicted by modeling air quality. This study aims to estimate CO concentration resulting from transportation activities using Delhi Finite Line Source (DFLS) model, comparing CO prediction using a DFLS model with CO observation in the field, and determine the suitability of the DFLS model application on the MT Haryono street in Medan City. Research was conducted for 3 days at two sample points with frequency twice daily. Based on research results, the range of CO concentration from observation between 22.903 μg/m3 - 27.484 μg/m3. CO observation is still below the ambient air quality standard. According to the DFLS calculations, the range of CO concentration between 1.499 μg/m3- 2.051 μg/m3. The calculation index of agreement (IOA) validation test obtained value of d = 0.22. The DFLS model is not suitable to be applied on MT Haryono street because many factors affected such as wind direction and wind velocity, ambient air temperature and humidity

Latest developments in resonantly diode-pumped Er:YAG lasers

NASA Astrophysics Data System (ADS)

Kudryashov, Igor; Garbuzov, Dmitri; Dubinskii, Mark

2007-04-01

Significant performance improvement of the Er(0.5%):YAG diode pumped solid state laser (DPSSL) has been achieved by pump diode spectral narrowing via implementation of an external volumetric Bragg grating (VBG). Without spectral narrowing, with a pump path length of 15 mm, only 37% of 1532 nm pump was absorbed. After the VBG spectral narrowing, the absorption of the pumping radiation increased to 62 - 70%. As a result, the incident power threshold was reduced by a factor of 2.5, and the efficiency increased by a factor of 1.7, resulting in a slope efficiency of ~23 - 30%. A maximum of 51 W of CW power was obtained versus 31 W without the pump spectrum narrowing. More than 180 mJ QCW pulse output energy was obtained in a stable-unstable resonator configuration with a beam quality of M2 = 1.3 in the stable direction and M2 = 1.1 in the unstable direction. The measured slope efficiency was 0.138 J/J with a threshold energy of 0.91 J.

Bioactive properties and clinical safety of a novel milk protein peptide

PubMed Central

2011-01-01

Background Milk protein fractions and peptides have been shown to have bioactive properties. This preliminary study examined the potential mechanisms of action and clinical safety of novel milk protein peptide (MP). Findings A novel MP mixture inhibits the tyrosine kinase activity of epidermal growth factor receptor (EGFR), vascular endothelial growth factor receptor 2 (VEGFR2), and insulin receptor (IR) with IC50 of 9.85 μM, 7.7 μM, and 6.18 μM respectively. In vitro, this multi-kinase inhibitor causes apoptosis in HT-29 colon cancer cells, and in a C. elegans worm study, showed a weak but significant increase in lifespan. A six week double-blind, placebo-controlled study involving 73 healthy volunteers demonstrated that the MP mixture is safe to consume orally. All clinical blood markers remained within normal levels and no clinically significant side effects were reported. There was some evidence of improved insulin sensitivity, neutrophil-to-lymphocyte ratio (NLR), and quality of life assessment of role of physical function. Conclusions These data in combination with the observed in vitro anti-cancer properties warrant further clinical studies to investigate this MP mixture as a potential clinical nutrition intervention for improving the quality of life and clinical outcomes in cancer patients. Trial Registration NCT01412658 PMID:21943352

Study of the effectiveness of several tree canopy types on roadside green belt in influencing the distribution of NO2 gas emitted from transportation

NASA Astrophysics Data System (ADS)

Desyana, R. D.; Sulistyantara, B.; Nasrullah, N.; Fatimah, I. S.

2017-03-01

Transportation is one significant factor which contributes to urban air pollution. One of the pollutants emitted from transportation which affect human’s health is NO2. Plants, especially trees, have high potential in reducing air pollutants from transportation through diffusion, absorbtion, adsorption and deposition. Purpose of this study was to analyze the effectiveness of several tree canopy types on roadside green belt in influencing distribution of NO2 gas emitted from transportation. The study conducted in three plots of tree canopy in Jagorawi Highway: Bungur (Lagerstroemia speciosa), Gmelina (Gmelina arborea) and Tanjung (Mimusops elengi). The tree canopy ability in absorbing pollutant is derived by comparing air quality on vegetated area with ambience air quality at control area (open field). Air sampling was conducted to measure NO2 concentration at elevation 1.5m, 5m and 10m at distance 0m, 10m and 30m, using Air Sampler Impinger. Concentration of NO2 was analyzed with Griess-Saltzman method. From this research, the result of ANOVA showed that tree plot (vegetated area) affected significantly to NO2 concentration. However the effect of distance from road and elevation was not significant. Among the plots, the highest NO2 concentration was found on Control plot (area without tree canopy), while the lowest NO2 concentration was found in Tanjung plot. Tanjung plot with round shape and high density canopy performed better in reducing NO2 than Bungur plot with round shape and medium density canopy, regardless the sampling elevation and distance. Gmelina plot performed the best in reducing horizontal distribution of NO2 concentration at elevation 1.5 and 5m, but the result at elevation 10m was not significant.

Decreased Sperm Motility Retarded ICSI Fertilization Rate in Severe Oligozoospermia but Good-Quality Embryo Transfer Had Achieved the Prospective Clinical Outcomes.

PubMed

Zheng, Jufeng; Lu, Yongning; Qu, Xianqin; Wang, Peng; Zhao, Luiwen; Gao, Minzhi; Shi, Huijuan; Jin, Xingliang

Spermatozoa motility is the critical parameter to affect the treatment outcomes during assisted reproductive technologies (ART), but its reproductive capability remains a little informed in condition of severe male factor infertility. This retrospective cohort study aimed to evaluate the effects of reduced sperm motility on the embryological and clinical outcomes in intra-cytoplasmic sperm injection (ICSI) treatment of severe oligozoospermia. 966 cycles (812 couples) of severe oligozoospermia diagnosed by spermatozoa count ≤ 5 × 106/mL and motile spermatozoa ≤ 2 × 106/mL were divided into four groups in according to the number of motile spermatozoa in one ejaculate on the day of oocyte retrieval (Group B-E). The control (Group A) was 188 cycles of moderate oligozoospermia with spermatozoa count > 5 × 106/mL and motile spermatozoa > 2 × 106/mL. All female partners were younger than 35 years of age. Logistic regression analyzed embryological outcomes (the rates of fertilization, cleavage and good-quality embryo) and clinical outcomes (the rates of pregnancy, implantation, early miscarriage and live birth). Quality of embryo transfer (ET) was divided into three classes as continuous factor to test the effects of embryo quality on clinical outcomes. The reduction in the number of motile sperm in four groups of severe oligozoospermia gave rise to comparable inability of the fertilization (p < 0.001) and a decreased rate of good-quality embryo at Day 3 (p < 0.001) by compared to the control. The cleavage rate of the derived zygotes was similar to the control. ET classes significantly affected the clinical outcomes (p < 0.001). Class I ET gave rise to similar rates of clinical outcomes between five groups, but Class II and Class III ET retarded the rates of pregnancy, implantation and live birth and this particularly occurred in Group C, D and E. The rate of early miscarriage was not comparably different between groups. Overall rates in all groups were 41.26% clinical pregnancy, 25.74% implantation and 36.32% live birth, which gave live birth to 252 girls and 252 boys. The reduction of motile spermatozoa in severe oligozoospermia decreased the rates of fertilization and good-quality embryo. Obtaining and transfer of good-quality embryos was the good prognostic to achieve prospective clinical outcomes regardless of the severity of oligozoospermia.

Preparation and optimization of self-assembled chondroitin sulfate-nisin nanogel based on quality by design concept.

PubMed

Mohtashamian, Shahab; Boddohi, Soheil; Hosseinkhani, Saman

2018-02-01

Self-assembled nanogel was prepared by electrostatic complexation of two oppositely charged biological macromolecules, which were cationic nisin and anionic chondroitin sulfate (ChS). The critical factors affected the physical properties of ChS-nisin nanogel was screened and optimized by Plackett-Burman design (PB) and central composite design (CCD). The independent factors selected were: concentration ratio of nisin to ChS, injection rate of nisin solution, buffer solvent type, magnetic stirring rate, pH of initial buffer solution, centrifuge-cooling temperature, and centrifuge rotation speed. Among these factors, concentration ratio changed the entrapment efficiency and loading capacity significantly. In addition, the hydrodynamic diameter and loading capacity were significantly influenced by injection rate and pH of initial buffer solution. The optimized nanogel structure was obtained by concentration ratio of 6.4mg/mL nisin to 1mg/mL ChS, pH of buffer solution at 4.6, and nisin solution injection rate of 0.2mL/min. The observed values of dependent responses were close to predicted values confirmed by model from response surface methodology. The results obviously showed that quality by design concept (QbD) could be effectively applied to optimize the developed ChS-nisin nanogel. Copyright © 2017 Elsevier B.V. All rights reserved.

Evaluation of messenger plant activator as a preharvest and postharvest treatment of sweet cherry fruit under a controlled atmosphere.

PubMed

Akbudak, Bulent; Tezcan, Himmet; Eris, Atilla

2009-08-01

The preservation methods as an alternative to chemical control to prevent postharvest quality losses of sweet cherry were examined. The efficacy of preharvest and postharvest messenger (M) treatments on sweet cherry cv. '0900 Ziraat' was tested under a controlled atmosphere in 2004 and 2005. The factors investigated included the separate or combined effect of low oxygen, high carbon dioxide and M on the quality and fungal pathogens of sweet cherries in a normal atmosphere (NA) and in a controlled atmosphere (CA). Cherries were placed at six different atmosphere combinations (0.03%:21% [NA, control], 5%:5%, 10%:5%, 15%:5%, 20%:5% and 25%:5% CO(2):O(2)) at 0°C and 90% relative humidity for up to 8 weeks. Mass values were higher in cherries stored under NA compared with CA. Initial firmness was 1.45 kg and 1.41 kg in fruits without messenger (WM) and in M fruits, respectively; and was measured as 0.30-0.59 kg in WM and 0.57-0.95 kg in M at the end of the trials. The highest acidity and ascorbic acid values were recorded at the end of storage from the fruit stored under CA + M. The CA + M treatment proved the most effective with regard to delaying the maturity and preserving the fruit quality in sweet cherries during storage. Moreover, the CA + M treatments reduced the rotten fruit from 24.06% to 3.80% in cv. '0900 Ziraat'. Better fruit quality was obtained under CA + M compared with NA and CA. The fungi most frequently isolated from sweet cherries were Botrytis cinerea, Penicillium expansum, Monilinia fructicola, Alternaria alternata and Rhizopus stolonifer. It was concluded that sweet cherry cv. '0900 Ziraat' could be stored successfully under CA (20%:5%) + M, and partially under CA (25%:5%) + M, conditions for more than 60 days. Thus, it is recommended that CO(2) levels for sweet cherry storage can be increased above 15% with M.

Beneficial effect of extracellular adenosine 5'-triphosphate treatment on the Indochinese leopard (Panthera pardus delacouri) sperm quality after cryopreservation.

PubMed

Thuwanut, P; Tipkantha, W; Siriaroonrat, B; Comizzoli, P; Chatdarong, K

2017-04-01

The Indochinese leopard (Panthera pardus delacouri) population, included in CITES Appendix I, has been declining for decades. Proper gamete preservation condition is critical for breeding programme management using artificial insemination or in vitro fertilization (IVF). The present study aimed at investigating the impact of post-thawing treatment of leopard semen with extracellular adenosine 5'-triphosphate (ATPe) on sperm quality (including morphological traits and ability to fertilize an oocyte). Semen from six adult male leopards was collected by electroejaculation (one ejaculation per cat). After the evaluation of the fresh sample quality, the semen was cryopreserved (10 × 10 6 cells per straw; two straws per cat). After thawing, the sperm sample from the first straw of each cat was divided into three aliquots: control (no ATPe), supplemented with 1.0 or 2.5 mM ATPe that were evaluated for sperm quality at 10, 30 min and 3 hr post-thawing. The sperm sample from the second straw, supplemented with 0, 1.0 or 2.5 mM ATPe for 30 min, was assessed for IVF with domestic cat oocytes. Sperm quality (all metrics) was negatively affected by the cryopreservation process (p ≤ .05). However, the percentage of sperm motility, level of progressive motility and percentage of plasma membrane integrity did not differ (p > .05) among post-thawing groups. The sperm mitochondrial membrane potential was enhanced (p ≤ .05) by ATPe treatment (1.0 and 2.5 mM; 10 min to 3 hr of incubation). Furthermore, incubation of ATPe (1.0 and 2.5 mM) for 30 min could promote sperm velocity patterns (curvilinear velocity; VCL and straight line velocity; VSL) (p ≤ .05). The percentage of pronuclear formation and cleaved embryos was increased (p ≤ .05) after 1.0 ATPe treatment (49.8 ± 2.8; 45.9 ± 1.5) compared to 0 mM (41.4 ± 3.3; 38.9 ± 0.5) whereas the number of sperm binding/oocyte did not significantly differ among groups. In summary, we suggest that ATPe activated the velocity of Indochinese leopard sperm motility that may lead to faster sperm/oocyte binding and sperm penetration (factors of successful embryo development). © 2016 Blackwell Verlag GmbH.

25  W/m² collection efficiency solar-pumped Nd:YAG laser by a heliostat-parabolic mirror system.

PubMed

Liang, D; Almeida, J; Vistas, C R

2016-09-20

A large aspheric fused silica lens was used to couple efficiently the concentrated solar radiation from the focal zone of a 1.5-m-diameter primary concentrator into a 4-mm-diameter, 35-mm-long Nd:YAG single-crystal rod within a conical pump cavity. Continuous-wave laser power of 29.3 W was measured, attaining 25.0  W/m² solar laser collection efficiency, corresponding to a 19% increase over the previous record. Its laser beam figure of merit-the ratio between laser power and the product of Mx2, My2 beam quality factors-of 0.01 W is 1.6 times higher than that of a direct tracking solar laser with 30  W/m² collection efficiency. A strong dependency of solar laser power on laser resonator cavity length was found.

Factors affecting feasibility and quality of second-trimester ultrasound scans in obese pregnant women.

PubMed

Fuchs, F; Houllier, M; Voulgaropoulos, A; Levaillant, J-M; Colmant, C; Bouyer, J; Senat, M-V

2013-01-01

To evaluate the feasibility of completing in one session a second-trimester ultrasound scan in obese pregnant women, to compare the quality of images obtained with those of non-obese women and to analyze factors that can improve the completion rate. This prospective study, from 2009 to 2011, included all obese pregnant women (prepregnancy body mass index (BMI) > 30 kg/m2) who had an ultrasound examination at 20-24 weeks in our department, and a control group of pregnant women with normal BMI (20-24.9 kg/m2) who had the same examination. A single operator reviewed the standardized ultrasound images (three biometric and six to assess key anatomical features) required under French guidelines, to assess their presence, evaluate the quality of all images and score the quality of the six anatomical images. Each image was assessed according to between four and six criteria, each worth one point. We sought excellent quality, defined as the frequency of maximum points for a given image type. The factors associated with completing the scan in one session were evaluated with multivariate logistic regression. The obese group included 223 women and the control group 60; a complete scan in one session was achieved in 70.4% and 81.7% of these, respectively (P = 0.08). The completion rate for each image type was at least 95% in the control group and 90% in the obese group, except for diaphragm and right outflow tract images. Significant factors associated with completing the scan in the multivariate model were: having 10 additional minutes for the scan (P = 0.03), moving the fetus so that the back was in posterior or lateral position (P = 0.01), more experienced sonographer (P = 0.03) and thinner maternal abdominal wall thickness (P = 0.01). Overall, the excellence rate varied from 35% to 92% in the normal BMI group and from 18% to 58% in the obese group, and was significantly lower in the latter for all images except abdominal circumference (P = 0.26) and spine (P = 0.06). Anatomical quality scores were also significantly lower in the obese group (22.3 vs. 27.2; P = 0.001). Although ultrasound scans of obese pregnant women are feasible, image quality and global anatomical scores are significantly lower among obese than normal-weight women. However, certain simple improvements may increase fetal visualization. Copyright © 2013 ISUOG. Published by John Wiley & Sons, Ltd.

Out-of-Field Dose Equivalents Delivered by Passively Scattered Therapeutic Proton Beams for Clinically Relevant Field Configurations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wroe, Andrew; Centre for Medical Radiation Physics, University of Wollongong, Wollongong; Clasie, Ben

2009-01-01

Purpose: Microdosimetric measurements were performed at Massachusetts General Hospital, Boston, MA, to assess the dose equivalent external to passively delivered proton fields for various clinical treatment scenarios. Methods and Materials: Treatment fields evaluated included a prostate cancer field, cranial and spinal medulloblastoma fields, ocular melanoma field, and a field for an intracranial stereotactic treatment. Measurements were completed with patient-specific configurations of clinically relevant treatment settings using a silicon-on-insulator microdosimeter placed on the surface of and at various depths within a homogeneous Lucite phantom. The dose equivalent and average quality factor were assessed as a function of both lateral displacement frommore » the treatment field edge and distance downstream of the beam's distal edge. Results: Dose-equivalent value range was 8.3-0.3 mSv/Gy (2.5-60-cm lateral displacement) for a typical prostate cancer field, 10.8-0.58 mSv/Gy (2.5-40-cm lateral displacement) for the cranial medulloblastoma field, 2.5-0.58 mSv/Gy (5-20-cm lateral displacement) for the spinal medulloblastoma field, and 0.5-0.08 mSv/Gy (2.5-10-cm lateral displacement) for the ocular melanoma field. Measurements of external field dose equivalent for the stereotactic field case showed differences as high as 50% depending on the modality of beam collimation. Average quality factors derived from this work ranged from 2-7, with the value dependent on the position within the phantom in relation to the primary beam. Conclusions: This work provides a valuable and clinically relevant comparison of the external field dose equivalents for various passively scattered proton treatment fields.« less

Exploring medical student decisions regarding attending live lectures and using recorded lectures.

PubMed

Gupta, Anmol; Saks, Norma Susswein

2013-09-01

Student decisions about lecture attendance are based on anticipated effect on learning. Factors involved in decision-making, the use of recorded lectures and their effect on lecture attendance, all warrant investigation. This study was designed to identify factors in student decisions to attend live lectures, ways in which students use recorded lectures, and if their use affects live lecture attendance. A total of 213 first (M1) and second year (M2) medical students completed a survey about lecture attendance, and rated factors related to decisions to attend live lectures and to utilize recorded lectures. Responses were analyzed overall and by class year and gender. M1 attended a higher percentage of live lectures than M2, while both classes used the same percentage of recorded lectures. Females attended more live lectures, and used a smaller percentage of recorded lectures. The lecturer was a key in attendance decisions. Also considered were the subject and availability of other learning materials. Students use recorded lectures as replacement for live lectures and as supplement to them. Lectures, both live and recorded, are important for student learning. Decisions about lecture placement in the curriculum need to be based on course content and lecturer quality.

In-Plume Emission Test Stand 2: Emission Factors for 10- to 100-kW U.S. Military Generators

DTIC Science & Technology

2009-12-01

dards, local communities near military bases must con - form to the National Ambient Air Quality Standards. Mil- itary diesel generators are widely used...Strategic En- vironmental Research and Development Program ( con - tract CP-1336). The USMC provided extraordinary coop- eration and assistance in providing...Aerosol. Sci. 2006, 37, 63-87. 37. Maricq, M.M.; Xu, N. The Effective Density and Fractal Dimension of Soot Particles from Premixed Flames and Motor

Thulium fiber laser for the use in low-invasive endoscopic and robotic surgery of soft biological tissues

NASA Astrophysics Data System (ADS)

Michalska, M.; Brojek, W.; Rybak, Z.; Sznelewski, P.; Mamajek, M.; Gogler, S.; Swiderski, J.

2016-12-01

An all-fiber, diode-pumped, continuous-wave Tm3+-doped fiber laser operated at a wavelength of 1.94 μm was developed. 37.4 W of output power with a slope efficiency as high as 57% with respect to absorbed pump power at 790 nm was demonstrated. The laser output beam quality factor M2 was measured to be 1.2. The output beam was very stable with power fluctuations <1% measured over 1 hour. The laser system is to be implemented as a scalpel for surgery of soft biological tissues.

Versatile control of metal-assisted chemical etching for vertical silicon microwire arrays and their photovoltaic applications

PubMed Central

Um, Han-Don; Kim, Namwoo; Lee, Kangmin; Hwang, Inchan; Hoon Seo, Ji; Yu, Young J.; Duane, Peter; Wober, Munib; Seo, Kwanyong

2015-01-01

A systematic study was conducted into the use of metal-assisted chemical etching (MacEtch) to fabricate vertical Si microwire arrays, with several models being studied for the efficient redox reaction of reactants with silicon through a metal catalyst by varying such parameters as the thickness and morphology of the metal film. By optimizing the MacEtch conditions, high-quality vertical Si microwires were successfully fabricated with lengths of up to 23.2 μm, which, when applied in a solar cell, achieved a conversion efficiency of up to 13.0%. These solar cells also exhibited an open-circuit voltage of 547.7 mV, a short-circuit current density of 33.2 mA/cm2, and a fill factor of 71.3% by virtue of the enhanced light absorption and effective carrier collection provided by the Si microwires. The use of MacEtch to fabricate high-quality Si microwires therefore presents a unique opportunity to develop cost-effective and highly efficient solar cells. PMID:26060095

Application of principal component analysis to ecodiversity assessment of postglacial landscape (on the example of Debnica Kaszubska commune, Middle Pomerania)

NASA Astrophysics Data System (ADS)

Wojciechowski, Adam

2017-04-01

In order to assess ecodiversity understood as a comprehensive natural landscape factor (Jedicke 2001), it is necessary to apply research methods which recognize the environment in a holistic way. Principal component analysis may be considered as one of such methods as it allows to distinguish the main factors determining landscape diversity on the one hand, and enables to discover regularities shaping the relationships between various elements of the environment under study on the other hand. The procedure adopted to assess ecodiversity with the use of principal component analysis involves: a) determining and selecting appropriate factors of the assessed environment qualities (hypsometric, geological, hydrographic, plant, and others); b) calculating the absolute value of individual qualities for the basic areas under analysis (e.g. river length, forest area, altitude differences, etc.); c) principal components analysis and obtaining factor maps (maps of selected components); d) generating a resultant, detailed map and isolating several classes of ecodiversity. An assessment of ecodiversity with the use of principal component analysis was conducted in the test area of 299,67 km2 in Debnica Kaszubska commune. The whole commune is situated in the Weichselian glaciation area of high hypsometric and morphological diversity as well as high geo- and biodiversity. The analysis was based on topographical maps of the commune area in scale 1:25000 and maps of forest habitats. Consequently, nine factors reflecting basic environment elements were calculated: maximum height (m), minimum height (m), average height (m), the length of watercourses (km), the area of water reservoirs (m2), total forest area (ha), coniferous forests habitats area (ha), deciduous forest habitats area (ha), alder habitats area (ha). The values for individual factors were analysed for 358 grid cells of 1 km2. Based on the principal components analysis, four major factors affecting commune ecodiversity were distinguished: hypsometric component (PC1), deciduous forest habitats component (PC2), river valleys and alder habitats component (PC3), and lakes component (PC4). The distinguished factors characterise natural qualities of postglacial area and reflect well the role of the four most important groups of environment components in shaping ecodiversity of the area under study. The map of ecodiversity of Debnica Kaszubska commune was created on the basis of the first four principal component scores and then five classes of diversity were isolated: very low, low, average, high and very high. As a result of the assessment, five commune regions of very high ecodiversity were separated. These regions are also very attractive for tourists and valuable in terms of their rich nature which include protected areas such as Slupia Valley Landscape Park. The suggested method of ecodiversity assessment with the use of principal component analysis may constitute an alternative methodological proposition to other research methods used so far. Literature Jedicke E., 2001. Biodiversität, Geodiversität, Ökodiversität. Kriterien zur Analyse der Landschaftsstruktur - ein konzeptioneller Diskussionsbeitrag. Naturschutz und Landschaftsplanung, 33(2/3), 59-68.

Fugitive dust emission source profiles and assessment of selected control strategies for particulate matter at gravel processing sites in Taiwan.

PubMed

Chang, Chang-Tang; Chang, Yu-Min; Lin, Wen-Yinn; Wu, Ming-Ching

2010-10-01

Particles emitted from gravel processing sites are one contributor to worsening air quality in Taiwan. Major pollution sources at gravel processing sites include gravel and sand piles, unpaved roads, material crushers, and bare ground. This study analyzed fugitive dust emission characteristics at each pollution source using several types of particle samplers, including total suspended particulates (TSP), suspended particulate (PM10), fine suspended particulate (PM2.5), particulate sizer, and dust-fall collectors. Furthermore, silt content and moisture in the gravel were measured to develop particulate emission factors. The results showed that TSP (< 100 microm) concentrations at the boundary of gravel sites ranged from 280 to 1290 microg/m3, which clearly exceeds the Taiwan hourly air quality standard of 500 microg/m3. Moreover, PM10 concentrations, ranging from 135 to 550 microg/m3, were also above the daily air quality standard of 125 microg/m3 and approximately 1.2 and 1.5 times the PM2.5 concentrations, ranging from 105 to 470 microg/m3. The size distribution analysis reveals that mass mean diameter and geometric standard deviation ranged from 3.2 to 5.7 microm and from 2.82 to 5.51, respectively. In this study, spraying surfactant was the most effective control strategy to abate windblown dust from unpaved roads, having a control efficiency of approximately 93%, which is significantly higher than using paved road strategies with a control efficiency of approximately 45%. For paved roads, wet suppression provided the best dust control efficiencies ranging from 50 to 83%. Re-vegetation of disturbed ground had dust control efficiencies ranging from 48 to 64%.

Food intake diet and sperm characteristics in a blue zone: a Loma Linda Study.

PubMed

Orzylowska, Eliza M; Jacobson, John D; Bareh, Gihan M; Ko, Edmund Y; Corselli, Johannah U; Chan, Philip J

2016-08-01

The study examined the effect the life-long vegetarian diet on male fertility and focused on vegetarians living in the Loma Linda blue zone, a demographic area known for life longevity. The objective was to compare sperm characteristics of vegetarian with non-vegetarian males. The cross-sectional observational study was based on semen analyses of 474 males from 2009 to 2013. Patients categorized themselves as either life-long lacto-ovo vegetarians (N=26; vegetable diet with dairy and egg products), vegans (N=5; strictly vegetables with no animal products) or non-vegetarians (N=443; no diet restrictions). Sperm quality was assessed using a computer-aided sperm analyzer and strict morphology and chromatin integrity were manually evaluated. Lacto-ovo vegetarians had lower sperm concentration (50.7±7.4M/mL versus non-vegetarians 69.6±3.2M/mL, mean±S.E.M.). Total motility was lower in the lacto-ovo and vegan groups (33.2±3.8% and 51.8±13.4% respectively) versus non-vegetarians (58.2±1.0%). Vegans had lowest hyperactive motility (0.8±0.7% versus lacto-ovo 5.2±1.2 and non-vegetarians 4.8±0.3%). Sperm strict morphologies were similar for the 3 groups. There were no differences in rapid progression and chromatin integrity. The study showed that the vegetables-based food intake decreased sperm quality. In particular, a reduction in sperm quality in male factor patients would be clinically significant and would require review. Furthermore, inadequate sperm hyperactivation in vegans suggested compromised membrane calcium selective channels. However, the study results are cautiously interpreted and more corroborative studies are needed. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

The Electronic CardioMetabolic Program (eCMP) for Patients With Cardiometabolic Risk: A Randomized Controlled Trial.

PubMed

Azar, Kristen M J; Koliwad, Suneil; Poon, Tak; Xiao, Lan; Lv, Nan; Griggs, Robert; Ma, Jun

2016-05-27

Effective lifestyle interventions targeting high-risk adults that are both practical for use in ambulatory care settings and scalable at a population management level are needed. Our aim was to examine the potential effectiveness, feasibility, and acceptability of delivering an evidence-based Electronic Cardio-Metabolic Program (eCMP) for improving health-related quality of life, improving health behaviors, and reducing cardiometabolic risk factors in ambulatory care high-risk adults. We conducted a randomized, wait-list controlled trial with 74 adults aged ≥18 years recruited from a large multispecialty health care organization. Inclusion criteria were (1) BMI ≥35 kg/m(2) and prediabetes, previous gestational diabetes and/or metabolic syndrome, or (2) BMI ≥30 kg/m(2) and type 2 diabetes and/or cardiovascular disease. Participants had a mean age of 59.7 years (SD 11.2), BMI 37.1 kg/m(2) (SD 5.4) and were 59.5% female, 82.4% white. Participants were randomized to participate in eCMP immediately (n=37) or 3 months later (n=37). eCMP is a 6-month program utilizing video conferencing, online tools, and pre-recorded didactic videos to deliver evidence-based curricula. Blinded outcome assessments were conducted at 3 and 6 months postbaseline. Data were collected and analyzed between 2014 and 2015. The primary outcome was health-related quality of life. Secondary outcomes included biometric cardiometabolic risk factors (eg, body weight), self-reported diet and physical activity, mental health status, retention, session attendance, and participant satisfaction. Change in quality of life was not significant in both immediate and delayed participants. Both groups significantly lost weight and reduced waist circumference at 6 months, with some cardiometabolic factors trending accordingly. Significant reduction in self-reported anxiety and perceived stress was seen in the immediate intervention group at 6 months. Retention rate was 93% at 3 months and 86% at 6 months post-baseline. Overall eCMP attendance was high with 59.5-83.8% of immediate and delayed intervention participants attending 50% of the virtual stress management and behavioral lifestyle sessions and 37.8-62.2% attending at least 4 out of 7 in-person physical activity sessions. The intervention received high ratings for satisfaction. The technology-assisted eCMP is a feasible and well-accepted intervention and may significantly decrease cardiometabolic risk among high-risk individuals. Clinicaltrials.gov NCT02246400; https://clinicaltrials.gov/ct2/show/NCT02246400 (Archived by WebCite at http://www.webcitation.org/6h6mWWokP).

Association of Increased Serum Ferritin With Impaired Muscle Strength/Quality in Hemodialysis Patients.

PubMed

Nakagawa, Chie; Inaba, Masaaki; Ishimura, Eiji; Yamakawa, Tomoyuki; Shoji, Shigeichi; Okuno, Senji

2016-07-01

We reported previously that muscle quality and muscle strength provide clinically relevant predictors for better survival in hemodialysis patients. Iron overload might impair muscle function by its accumulation in muscle in such patients. Serum ferritin, a marker for body iron store, was examined for its association with handgrip strength (HGS) and muscle quality which was defined as the ratio of HGS to arm lean mass measured with dual-energy X-ray absorptiometry. In 300 Japanese hemodialysis patients, age, hemodialysis duration, body mass index, and serum albumin were 58.0 ±12.0 (mean ± standard deviation) years, 4.2 (1.8-10.4) (median [25th-75th percentile]) years, 20.4 ± 2.8 kg/m(2), 4.0 ± 0.3 g/dL, respectively. Hemoglobin and hematocrit were 8.9 ± 1.2 g/dL, and 28.8 ± 3.9%, respectively, whereas transferrin saturation and serum ferritin were 29.8 ± 11.0% and 100 (54-172) ng/mL, respectively. Serum ferritin significantly correlated in a positive manner with the total dose of iron orally administered during the previous 6 months (r = 0.185, P = .0013). HGS and muscle quality were 23.1 ± 10.4 kg and 11.6 ± 3.8 kg/kg, respectively. In multivariate analysis to elucidate the factors associated with HGS and muscle quality in 300 hemodialysis patients, which included transferrin saturation and log serum ferritin, in addition to age, gender, hemodialysis duration, the presence/absence of diabetes, body mass index as independent variables, log serum ferritin emerged as a significant and independent factor which associated in a negative fashion with HGS (β = -0.091, P = .0395) and tendency toward negative association with muscle quality (β = -0.100, P = .0754). In summary, the present study demonstrated the significant association of serum ferritin with HGS and muscle quality in hemodialysis patients and thus suggested that we should be careful of iron overload to avoid its possible harmful effect on muscle in such patients. Copyright © 2016 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

Determinant impact of waste collection and composition on anaerobic digestion performance: industrial results.

PubMed

Saint-Joly, C; Desbois, S; Lotti, J P

2000-01-01

The performance of the anaerobic digestion process depends deeply on the quality of the waste to be treated. This has been already demonstrated at the lab-scale. The objective of this study is to confirm this result at the industrial scale, with very long representative period and with the same process, the Valorga process. According to the waste quality and the collection type and even with the same conditions of fermentation, the biogas yield can vary by a factor of 1.5 when it is expressed (under normal conditions of pressure and temperature) in m3 biogas/t fresh waste, and by a factor of 2 when it is expressed in m3 CH4/t volatile solids. So, the biogas performance does not characterise a process since it is deeply governed by waste composition. This biogas productivity becomes a pertinent parameter only with consistent and relevant hypothesis and/or analytical results on the waste composition which depends on the collection procedure, the site characteristics and the season.

Optical microresonator for application to an opto-electronic oscillator

NASA Astrophysics Data System (ADS)

Wu, Yu-Mei; Vivien, Laurent; Cassan, Eric; Luong, Vu Hai Nam; Nguyen, Lam Duy; Journet, Bernard

2010-02-01

Optoelectronic oscillators are classically based on a feedback fiber loop acting as a delay line for high spectral purity. One of the problems due to long fiber loops is the size and the requirement of temperature control. Going toward integrated solutions requires the introduction of optical resonators with a very high quality factor. A structure based on silicon on insulator material has been designed for application to an oscillator working at 8 GHz. The micro-resonator has a stadium shape with a ridge of 30 nm height, 1 μm width, a millimetric radius and a gap of some microns in agreement with the required free spectral range. A quality factor of 500000 can be achieved leading to an equivalent fiber loop of 2 km.

Fabrication of triangular nanobeam waveguide networks in bulk diamond using single-crystal silicon hard masks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bayn, I.; Mouradian, S.; Li, L.

2014-11-24

A scalable approach for integrated photonic networks in single-crystal diamond using triangular etching of bulk samples is presented. We describe designs of high quality factor (Q = 2.51 × 10{sup 6}) photonic crystal cavities with low mode volume (V{sub m} = 1.062 × (λ/n){sup 3}), which are connected via waveguides supported by suspension structures with predicted transmission loss of only 0.05 dB. We demonstrate the fabrication of these structures using transferred single-crystal silicon hard masks and angular dry etching, yielding photonic crystal cavities in the visible spectrum with measured quality factors in excess of Q = 3 × 10{sup 3}.

Measurement system with high accuracy for laser beam quality.

PubMed

Ke, Yi; Zeng, Ciling; Xie, Peiyuan; Jiang, Qingshan; Liang, Ke; Yang, Zhenyu; Zhao, Ming

2015-05-20

Presently, most of the laser beam quality measurement system collimates the optical path manually with low efficiency and low repeatability. To solve these problems, this paper proposed a new collimated method to improve the reliability and accuracy of the measurement results. The system accuracy controlled the position of the mirror to change laser beam propagation direction, which can realize the beam perpendicularly incident to the photosurface of camera. The experiment results show that the proposed system has good repeatability and the measuring deviation of M² factor is less than 0.6%.

Application of real-time radiation dosimetry using a new silicon LET sensor

NASA Technical Reports Server (NTRS)

Doke, T.; Hayashi, T.; Kikuchi, J.; Nagaoka, S.; Nakano, T.; Sakaguchi, T.; Terasawa, K.; Badhwar, G. D.

1999-01-01

A new type of real-time radiation monitoring device, RRMD-III, consisting of three double-sided silicon strip detectors (DSSDs), has been developed and tested on-board the Space Shuttle mission STS-84. The test succeeded in measuring the linear energy transfer (LET) distribution over the range of 0.2 keV/micrometer to 600 keV/micrometer for 178 h. The Shuttle cruised at an altitude of 300 to 400 km and an inclination angle of 51.6 degrees for 221.3 h, which is equivalent to the International Space Station orbit. The LET distribution obtained for particles was investigated by separating it into galactic cosmic ray (GCR) particles and trapped particles in the South Atlantic Anomaly (SAA) region. The result shows that the contribution in dose-equivalent due to GCR particles is almost equal to that from trapped particles. The total absorbed dose rate during the mission was 0.611 mGy/day; the effective quality factor, 1.64; and the dose equivalent rate, 0.998 mSv/day. The average absorbed dose rates are 0.158 mGy/min for GCR particles and 3.67 mGy/min for trapped particles. The effective quality factors are 2.48 for GCR particles and 1.19 for trapped particles. The absorbed doses obtained by the RRMD-III and a conventional method using TLD (Mg(2)SiO(4)), which was placed around the RRMD-III were compared. It was found that the TLDs showed a lower efficiency, just 58% of absorbed dose registered by the RRMD-III.

Poor sleep quality and later sleep timing are risk factors for osteopenia and sarcopenia in middle-aged men and women: The NEO study.

PubMed

Lucassen, Eliane A; de Mutsert, Renée; le Cessie, Saskia; Appelman-Dijkstra, Natasha M; Rosendaal, Frits R; van Heemst, Diana; den Heijer, Martin; Biermasz, Nienke R

2017-01-01

Sleep deprivation has detrimental metabolic consequences. Osteopenia and sarcopenia usually occur together and increase risk of fractures and disease. Results from studies linking sleep parameters to osteopenia or sarcopenia are scarce and inconsistent. To examine the associations of sleep parameters with osteopenia and sarcopenia, considering the influence of sex and menopause. Cross-sectional analysis of 915 participants (45-65 years, 56% women, BMI 26 (range: 18-56) kg/m2) in the Netherlands Epidemiology of Obesity (NEO) study, a population-based cohort study. Sleep duration, quality, and timing were assessed with the Pittsburgh Sleep Quality Index (PSQI); bone mineral density and relative appendicular muscle mass were measured by DXA scans. Linear and logistic regressions were performed to associate sleep parameters to bone mineral density, relative appendicular muscle mass, osteopenia (t-score between -1 and -2.5) and sarcopenia (1 SD below average muscle mass). After adjustment for confounding factors, one unit increase in PSQI score (OR and 95% CI, 1.09, 1.03-1.14), declined self-rated sleep quality (1.76, 1.03-3.01), sleep latency (1.18, 1.06-1.31), and a one hour later sleep timing (1.51, 1.08-2.11), but not sleep duration (1.05, 0.90-1.23), were associated with osteopenia. PSQI score (1.10, 1.02-1.19) was also associated with sarcopenia; OR's of sleep latency and later mid-sleep time with sarcopenia were 1.14 (0.99-1.31) and 1.54 (0.91-2.61), respectively. Associations were somewhat stronger in women and varied per menopausal status. These results suggest that decreased sleep quality and a later sleep timing are risk factors for osteopenia and sarcopenia in middle aged individuals.

Scale effects on spatially varying relationships between urban landscape patterns and water quality.

PubMed

Sun, Yanwei; Guo, Qinghai; Liu, Jian; Wang, Run

2014-08-01

Scientific interpretation of the relationships between urban landscape patterns and water quality is important for sustainable urban planning and watershed environmental protection. This study applied the ordinary least squares regression model and the geographically weighted regression model to examine the spatially varying relationships between 12 explanatory variables (including three topographical factors, four land use parameters, and five landscape metrics) and 15 water quality indicators in watersheds of Yundang Lake, Maluan Bay, and Xinglin Bay with varying levels of urbanization in Xiamen City, China. A local and global investigation was carried out at the watershed-level, with 50 and 200 m riparian buffer scales. This study found that topographical features and landscape metrics are the dominant factors of water quality, while land uses are too weak to be considered as a strong influential factor on water quality. Such statistical results may be related with the characteristics of land use compositions in our study area. Water quality variations in the 50 m buffer were dominated by topographical variables. The impact of landscape metrics on water quality gradually strengthen with expanding buffer zones. The strongest relationships are obtained in entire watersheds, rather than in 50 and 200 m buffer zones. Spatially varying relationships and effective buffer zones were verified in this study. Spatially varying relationships between explanatory variables and water quality parameters are more diversified and complex in less urbanized areas than in highly urbanized areas. This study hypothesizes that all these varying relationships may be attributed to the heterogeneity of landscape patterns in different urban regions. Adjustment of landscape patterns in an entire watershed should be the key measure to successfully improving urban lake water quality.

Anastomotic leak after colorectal resection: A population-based study of risk factors and hospital variation.

PubMed

Nikolian, Vahagn C; Kamdar, Neil S; Regenbogen, Scott E; Morris, Arden M; Byrn, John C; Suwanabol, Pasithorn A; Campbell, Darrell A; Hendren, Samantha

2017-06-01

Anastomotic leak is a major source of morbidity in colorectal operations and has become an area of interest in performance metrics. It is unclear whether anastomotic leak is associated primarily with surgeons' technical performance or explained better by patient characteristics and institutional factors. We sought to establish if anastomotic leak could serve as a valid quality metric in colorectal operations by evaluating provider variation after adjusting for patient factors. We performed a retrospective cohort study of colorectal resection patients in the Michigan Surgical Quality Collaborative. Clinically relevant patient and operative factors were tested for association with anastomotic leak. Hierarchical logistic regression was used to derive risk-adjusted rates of anastomotic leak. Of 9,192 colorectal resections, 244 (2.7%) had a documented anastomotic leak. The incidence of anastomotic leak was 3.0% for patients with pelvic anastomoses and 2.5% for those with intra-abdominal anastomoses. Multivariable analysis showed that a greater operative duration, male sex, body mass index >30 kg/m 2 , tobacco use, chronic immunosuppressive medications, thrombocytosis (platelet count >400 × 10 9 /L), and urgent/emergency operations were independently associated with anastomotic leak (C-statistic = 0.75). After accounting for patient and procedural risk factors, 5 hospitals had a significantly greater incidence of postoperative anastomotic leak. This population-based study shows that risk factors for anastomotic leak include male sex, obesity, tobacco use, immunosuppression, thrombocytosis, greater operative duration, and urgent/emergency operation; models including these factors predict most of the variation in anastomotic leak rates. This study suggests that anastomotic leak can serve as a valid metric that can identify opportunities for quality improvement. Copyright © 2017 Elsevier Inc. All rights reserved.

Assessment of groundwater and soil quality degradation using multivariate and geostatistical analyses, Dakhla Oasis, Egypt

NASA Astrophysics Data System (ADS)

Masoud, Alaa A.; El-Horiny, Mohamed M.; Atwia, Mohamed G.; Gemail, Khaled S.; Koike, Katsuaki

2018-06-01

Salinization of groundwater and soil resources has long been a serious environmental hazard in arid regions. This study was conducted to investigate and document the factors controlling such salinization and their inter-relationships in the Dakhla Oasis (Egypt). To accomplish this, 60 groundwater samples and 31 soil samples were collected in February 2014. Factor analysis (FA) and hierarchical cluster analysis (HCA) were integrated with geostatistical analyses to characterize the chemical properties of groundwater and soil and their spatial patterns, identify the factors controlling the pattern variability, and clarify the salinization mechanism. Groundwater quality standards revealed emergence of salinization (av. 885.8 mg/L) and extreme occurrences of Fe2+ (av. 17.22 mg/L) and Mn2+ (av. 2.38 mg/L). Soils were highly salt-affected (av. 15.2 dS m-1) and slightly alkaline (av. pH = 7.7). Evaporation and ion-exchange processes governed the evolution of two main water types: Na-Cl (52%) and Ca-Mg-Cl (47%), respectively. Salinization leads the chemical variability of both resources. Distinctive patterns of slight salinization marked the northern part and intense salinization marked the middle and southern parts. Congruence in the resources clusters confirmed common geology, soil types, and urban and agricultural practices. Minimizing the environmental and socioeconomic impacts of the resources salinization urges the need for better understanding of the hydrochemical characteristics and prediction of quality changes.

Determination of the influence factors of the radiopharmaceutical vials dimensions used for activimeter calibration at IPEN.

PubMed

Martins, E W; Potiens, M P A

2012-07-01

This paper presents the establishment of a quality control program and correction factors for the geometry of the vials used for distribution of radiopharmaceutical and activimeters calibration. The radiopharmaceutical produced by IPEN 67Ga, 131I, 201Tl and 99mTc had been tested using two different vials. Results show a maximum variation of 22% for 201Tl, and the minimum variation was 2.98% for 131I. The correction factors must be incorporated in the routine calibration of the activimeters. Copyright © 2011 Elsevier Ltd. All rights reserved.

Seasonal variation in the quality of dissolved and particulate organic matter exchanged between a salt marsh and its adjacent estuary

NASA Astrophysics Data System (ADS)

Osburn, Christopher L.; Mikan, Molly P.; Etheridge, J. Randall; Burchell, Michael R.; Birgand, François

2015-07-01

Fluorescence was used to examine the quality of dissolved and particulate organic matter (DOM and POM) exchanging between a tidal creek in a created salt marsh and its adjacent estuary in eastern North Carolina, USA. Samples from the creek were collected hourly over four tidal cycles in May, July, August, and October 2011. Absorbance and fluorescence of chromophoric DOM (CDOM) and of base-extracted POM (BEPOM) served as the tracers for organic matter quality while dissolved organic carbon (DOC) and base-extracted particulate organic carbon (BEPOC) were used to compute fluxes. Fluorescence was modeled using parallel factor analysis (PARAFAC) and principle components analysis (PCA) of the PARAFAC results. Of nine PARAFAC components (C) modeled, C3 represented recalcitrant DOM and C4 represented fresher soil-derived source DOM. Component 1 represented detrital POM, and C6 represented planktonic POM. Based on mass balance, recalcitrant DOC export was 86 g C m-2 yr-1 and labile DOC export was 49 g C m-2 yr-1; no planktonic DOC was exported. The marsh also exported 41 g C m-2 yr-1 of detrital terrestrial POC, which likely originated from lands adjacent to the North River estuary. Planktonic POC export from the marsh was 6 g C m-2 yr-1. Assuming the exported organic matter was oxidized to CO2 and scaled up to global salt marsh area, respiration of salt marsh DOC and POC transported to estuaries could amount to a global CO2 flux of 11 Tg C yr-1, roughly 4% of the recently estimated CO2 release for marshes and estuaries globally.

The prevalence of underweight is increased in chronic pancreatitis outpatients and associates with reduced life quality.

PubMed

Olesen, Søren S; Frandsen, Louise Kuhlman; Poulsen, Jakob Lykke; Vestergaard, Peter; Rasmussen, Henrik Højgaard; Drewes, Asbjørn M

Underweight is a well-known complication of chronic pancreatitis (CP), but little is known about its prevalence in the outpatient setting. We investigated the prevalence of underweight in outpatients with CP and its association with quality of life (QOL) and various risk factors. This was a cross-sectional study of 166 outpatients with CP that was conducted at a tertiary referral center. The primary outcome was the prevalence of underweight (body mass index [BMI] <20 kg/m 2 ) in patients with CP compared with 160 age- and sex-matched controls. Clinical and demographic parameters including QOL, exocrine pancreatic insufficiency (EPI), pain severity, pain pattern (constant versus intermittent), opioid use, and smoking and drinking habits were analyzed for their association with BMI. Patients with CP had a decreased mean BMI compared with controls (22.9 ± 4.2 kg/m 2 versus 26.8 ± 5.2 kg/m 2 ; P < 0.0001). Of 166 patients with CP, 43 (26.0% [95% confidence interval: 19.8-33.1%]) were underweight compared with 15 of 160 controls (9.4% [95% confidence interval: 5.8-14.9%]; odds ratio: 3.38 [95% confidence interval: 1.79-6.38]; P = 0.0001). Several QOL scales and items were associated with underweight, including physical functioning (P = 0.024). Alcoholic etiology (P = 0.002), EPI (P = 0.004), and constant pain (P = 0.026) were independently associated with low BMI. One quarter of outpatients with CP are underweight and report reduced life quality compared with their normal-weight counterparts. EPI, alcoholic etiology, and pain-related symptoms are independent risk factors. Our findings emphasize the need for a multidisciplinary approach in the handling of patients with CP that focuses on alcohol cessation and the appropriate treatment of pain and EPI. Copyright © 2017 Elsevier Inc. All rights reserved.

High risk for obstructive sleep apnea and other sleep disorders among overweight and obese pregnant women.

PubMed

Rice, Jayne R; Larrabure-Torrealva, Gloria T; Luque Fernandez, Miguel Angel; Grande, Mirtha; Motta, Vicky; Barrios, Yasmin V; Sanchez, Sixto; Gelaye, Bizu; Williams, Michelle A

2015-09-02

Obstructive sleep apnea (OSA), a common and serious disorder in which breathing repeatedly stops during sleep, is associated with excess weight and obesity. Little is known about the co-occurrence of OSA among pregnant women from low and middle-income countries. We examined the extent to which maternal pre-pregnancy overweight or obesity status are associated with high risk for OSA, poor sleep quality, and excessive daytime sleepiness in 1032 pregnant women in Lima, Peru. The Berlin questionnaire was used to identify women at high risk for OSA. The Pittsburgh Sleep Quality Index (PSQI) and Epworth Sleepiness Scale (ESS) were used to examine sleep quality and excessive daytime sleepiness, respectively. Multinomial logistic regression procedures were employed to estimate odds ratios (aOR) and 95% confidence intervals (CI) adjusted for putative confounding factors. Compared with lean women (<25 kg/m(2)), overweight women (25-29.9 kg/m(2)) had 3.69-fold higher odds of high risk for OSA (95% CI 1.82-7.50). The corresponding aOR for obese women (≥30 kg/m(2)) was 13.23 (95% CI: 6.25-28.01). Obese women, as compared with their lean counterparts had a 1.61-fold higher odds of poor sleep quality (95% CI: 1.00-2.63). Overweight or obese pregnant women have increased odds of sleep disorders, particularly OSA. OSA screening and risk management may be indicated among pregnant women in low and middle income countries, particularly those undergoing rapid epidemiologic transitions characterized by increased prevalence of excessive adult weight gain.

Poultry rearing on perforated plastic floors and the effect on air quality, growth performance, and carcass injuries-Experiment 1: Thermal Comfort.

PubMed

de Almeida, Eduardo Alves; Arantes de Souza, Lilian Francisco; Sant'Anna, Aline Cristina; Bahiense, Raphael Nogueira; Macari, Marcos; Furlan, Renato Luis

2017-09-01

The present study investigated the use of perforated plastic floors in the rearing of male and female poultry under thermal comfort conditions. The study was conducted in 2 climate chambers, in one was conventional poultry litter (wood shavings) and in the other was a perforated plastic floor. The experimental design was a completely randomized design with the factors wood shavings and plastic floor. In each chamber, the animals were divided into 16 experimental pens (8 with males and 8 with females) with a density of 12 birds/m2. The poultry rearing effect was evaluated in terms of air quality (% concentration of ammonia [NH3] and carbon dioxide [CO2]); broiler performance, e.g., weight gain (kg), feed intake (kg), feed conversion, carcass yield and parts (%), meat production (kg/m2), and viability (% of live birds at d 42); scores of hygiene and mobility; and injuries in the chest, hocks, and footpads. Treatments affected air quality, with higher concentrations of NH3 on d 42 (25 ppm vs. 2 ppm) and CO2 (1,400 ppm vs. 1,000 ppm) for wood shavings than for perforated plastic floor, respectively. Males showed a better performance (weight gain, feed intake and feed conversion) than females on d 42 in both floor types (wood shavings and plastic floor). Males reared on wood shavings showed a higher meet production (35.992 kg/m2) than females (32.257 kg/m2). On the plastic floor, males showed a better viability (100%) than females (94.05%), as well better meet production for males (38.55 kg·m-2) than females (31.64 kg/m2). There was no incidence of breast lesions in any of the studied systems. The birds reared on the plastic floor had better hygiene scores and lower hock injury rates than birds reared in the wood shavings chambers. The results of the present study show that the use of perforated plastic floors in chicken farming is an efficient method, which promotes a better-quality environment, superior production rates, and reduced incidence of injuries. © 2017 Poultry Science Association Inc.

Pressure effects on the dissipative behavior of nanocrystalline diamond microelectromechanical resonators

NASA Astrophysics Data System (ADS)

Santos, J. T.; Holz, T.; Fernandes, A. J. S.; Costa, F. M.; Chu, V.; Conde, J. P.

2015-02-01

Diamond-based microelectromechanical resonators have the potential of enhanced performance due to the chemical inertness of the diamond structural layer and its high Young’s modulus, high wear resistance, low thermal expansion coefficient, and very high thermal conductivity. In this work, the resonance frequency and quality factor of MEMS resonators based on nanocrystalline diamond films are characterized under different air pressures. The dynamic behavior of 50-300 μm long linear bridges and double ended tuning forks, with resonance frequencies between 0.5 and 15 MHz and quality factors as high as 50 000 are described as a function of measurement pressure from high vacuum(~10 mTorr) up to atmospheric conditions. The resonance frequencies and quality factors in vacuum show good agreement with the theoretical models including anchor and thermoelastic dissipation (TED). The Young’s moduli for nanocrystalline diamond films extrapolated from experimental data are between 840-920 GPa. The critical pressure values, at which the quality factor starts decreasing due to dissipation in air, are dependent on the resonator length. Longer structures, with quality factors limited by TED and lower resonance frequencies, have low critical pressures, of the order of 1-10 Torr and go from an intrinsic dissipation, to a molecular dissipation regime and finally to a region of viscous dissipation. Shorter resonators, with higher resonance frequencies and quality factors limited by anchor losses, have higher critical pressures, some higher than atmospheric pressure, and enter directly into the viscous dissipation regime from the intrinsic region.

Ultra-High Q Acoustic Resonance in Superfluid ^4He

NASA Astrophysics Data System (ADS)

De Lorenzo, L. A.; Schwab, K. C.

2017-02-01

We report the measurement of the acoustic quality factor of a gram-scale, kilohertz-frequency superfluid resonator, detected through the parametric coupling to a superconducting niobium microwave cavity. For temperatures between 400 mK and 50 mK, we observe a T^{-4} temperature dependence of the quality factor, consistent with a 3-phonon dissipation mechanism. We observe Q factors up to 1.4× 10^8, consistent with the dissipation due to dilute ^3He impurities, and expect that significant further improvements are possible. These experiments are relevant to exploring quantum behavior and decoherence of massive macroscopic objects, the laboratory detection of continuous gravitational waves from pulsars, and the probing of possible limits to physical length scales.

Streptavidin Modified ZnO Film Bulk Acoustic Resonator for Detection of Tumor Marker Mucin 1

NASA Astrophysics Data System (ADS)

Zheng, Dan; Guo, Peng; Xiong, Juan; Wang, Shengfu

2016-09-01

A ZnO-based film bulk acoustic resonator has been fabricated using a magnetron sputtering technology, which was employed as a biosensor for detection of mucin 1. The resonant frequency of the thin-film bulk acoustic resonator was located near at 1503.3 MHz. The average electromechanical coupling factor {K}_{eff}^2 and quality factor Q were 2.39 % and 224, respectively. Using the specific binding system of avidin-biotin, the streptavidin was self-assembled on the top gold electrode as the sensitive layer to indirectly test the MUC1 molecules. The resonant frequency of the biosensor decreases in response to the mass loading in range of 20-500 nM. The sensor modified with the streptavidin exhibits a high sensitivity of 4642.6 Hz/nM and a good selectivity.

Seasonal Variation in the Quality of Dissolved and Particulate Organic Matter Exchanged Between a Salt Marsh and Its Adjacent Estuary

NASA Astrophysics Data System (ADS)

Osburn, C. L.; Mikan, M.; Etheridge, J. R.; Burchell, M. R.; Birgand, F.

2015-12-01

Salt marshes are transitional ecosystems between terrestrial and marine environments. Along with mangroves and other vegetated coastal habitats, salt marshes rank among the most productive ecosystems on Earth, with critical global importance for the planet's carbon cycle. Fluorescence was used to examine the quality of dissolved and particulate organic matter (DOM and POM) exchanging between a tidal creek in a created salt marsh and its adjacent estuary in eastern North Carolina, USA. Samples from the creek were collected hourly over four tidal cycles in May, July, August, and October of 2011. Absorbance and fluorescence of chromophoric DOM (CDOM) and of base-extracted POM (BEPOM) served as the tracers for organic matter quality while dissolved organic carbon (DOC) and base-extracted particulate organic carbon (BEPOC) were used to compute fluxes. Fluorescence was modeled using parallel factor analysis (PARAFAC) and principle components analysis (PCA) of the PARAFAC results. Of nine PARAFAC components modeled, we used multiple linear regression to identify tracers for recalcitrant DOM; labile soil-derived source DOM; detrital POM; and planktonic POM. Based on mass balance, recalcitrant DOC export was 86 g C m-2 yr-1 and labile DOC export was 49 g C m-2 yr-1. The marsh also exported 41 g C m-2 yr-1 of detrital terrestrial POC, which likely originated from lands adjacent to the North River estuary. Planktonic POC export from the marsh was 6 g C m-2 yr-1. Using the DOM and POM quality results obtained via fluorescence measurements and scaling up to global salt marsh area, we estimated that the potential release of CO2 from the respiration of salt marsh DOC and POC transported to estuaries could be 11 Tg C yr-1, roughly 4% of the recently estimated CO2 release for marshes and estuaries globally.

Robust modular product family design

NASA Astrophysics Data System (ADS)

Jiang, Lan; Allada, Venkat

2001-10-01

This paper presents a modified Taguchi methodology to improve the robustness of modular product families against changes in customer requirements. The general research questions posed in this paper are: (1) How to effectively design a product family (PF) that is robust enough to accommodate future customer requirements. (2) How far into the future should designers look to design a robust product family? An example of a simplified vacuum product family is used to illustrate our methodology. In the example, customer requirements are selected as signal factors; future changes of customer requirements are selected as noise factors; an index called quality characteristic (QC) is set to evaluate the product vacuum family; and the module instance matrix (M) is selected as control factor. Initially a relation between the objective function (QC) and the control factor (M) is established, and then the feasible M space is systemically explored using a simplex method to determine the optimum M and the corresponding QC values. Next, various noise levels at different time points are introduced into the system. For each noise level, the optimal values of M and QC are computed and plotted on a QC-chart. The tunable time period of the control factor (the module matrix, M) is computed using the QC-chart. The tunable time period represents the maximum time for which a given control factor can be used to satisfy current and future customer needs. Finally, a robustness index is used to break up the tunable time period into suitable time periods that designers should consider while designing product families.

Maternal Factors Are Associated with the Expression of Placental Genes Involved in Amino Acid Metabolism and Transport

PubMed Central

Day, Pricilla E.; Ntani, Georgia; Crozier, Sarah R.; Mahon, Pam A.; Inskip, Hazel M.; Cooper, Cyrus; Harvey, Nicholas C.; Godfrey, Keith M.; Hanson, Mark A.; Lewis, Rohan M.; Cleal, Jane K.

2015-01-01

Introduction Maternal environment and lifestyle factors may modify placental function to match the mother’s capacity to support the demands of fetal growth. Much remains to be understood about maternal influences on placental metabolic and amino acid transporter gene expression. We investigated the influences of maternal lifestyle and body composition (e.g. fat and muscle content) on a selection of metabolic and amino acid transporter genes and their associations with fetal growth. Methods RNA was extracted from 102 term Southampton Women’s Survey placental samples. Expression of nine metabolic, seven exchange, eight accumulative and three facilitated transporter genes was analyzed using quantitative real-time PCR. Results Increased placental LAT2 (p = 0.01), y + LAT2 (p = 0.03), aspartate aminotransferase 2 (p = 0.02) and decreased aspartate aminotransferase 1 (p = 0.04) mRNA expression associated with pre-pregnancy maternal smoking. Placental mRNA expression of TAT1 (p = 0.01), ASCT1 (p = 0.03), mitochondrial branched chain aminotransferase (p = 0.02) and glutamine synthetase (p = 0.05) was positively associated with maternal strenuous exercise. Increased glutamine synthetase mRNA expression (r = 0.20, p = 0.05) associated with higher maternal diet quality (prudent dietary pattern) pre-pregnancy. Lower LAT4 (r = -0.25, p = 0.05) and aspartate aminotransferase 2 mRNA expression (r = -0.28, p = 0.01) associated with higher early pregnancy diet quality. Lower placental ASCT1 mRNA expression associated with measures of increased maternal fat mass, including pre-pregnancy BMI (r = -0.26, p = 0.01). Lower placental mRNA expression of alanine aminotransferase 2 associated with greater neonatal adiposity, for example neonatal subscapular skinfold thickness (r = -0.33, p = 0.001). Conclusion A number of maternal influences have been linked with outcomes in childhood, independently of neonatal size; our finding of associations between placental expression of transporter and metabolic genes and maternal smoking, physical activity and diet raises the possibility that their effects are mediated in part through alterations in placental function. The observed changes in placental gene expression in relation to modifiable maternal factors are important as they could form part of interventions aimed at maintaining a healthy lifestyle for the mother and for optimal fetal development. PMID:26657885

Novel, compact, and simple ND:YVO4 laser with 12 W of CW optical output power and good beam quality

NASA Astrophysics Data System (ADS)

Zimer, H.; Langer, B.; Wittrock, U.; Heine, F.; Hildebrandt, U.; Seel, S.; Lange, R.

2017-11-01

We present first, promising experiments with a novel, compact and simple Nd:YVO4 slab laser with 12 W of 1.06 μm optical output power and a beam quality factor M2 2.5. The laser is made of a diffusion-bonded YVO4/Nd:YVO4 composite crystal that exhibits two unique features. First, it ensures a one-dimensional heat removal from the laser crystal, which leads to a temperature profile without detrimental influence on the laser beam. Thus, the induced thermo-optical aberrations to the laser field are low, allowing power scaling with good beam quality. Second, the composite crystal itself acts as a waveguide for the 809 nm pump-light that is supplied from a diode laser bar. Pump-light shaping optics, e.g. fast- or slow-axis collimators can be omitted, reducing the complexity of the system. Pump-light redundancy can be easily achieved. Eventually, the investigated slab laser might be suitable for distortion-free high gain amplification of weak optical signals.

Microbiological quality and somatic cell count in bulk milk of dromedary camels (Camelus dromedarius): descriptive statistics, correlations, and factors of variation.

PubMed

Nagy, P; Faye, B; Marko, O; Thomas, S; Wernery, U; Juhasz, J

2013-09-01

The objectives of the present study were to monitor the microbiological quality and somatic cell count (SCC) of bulk tank milk at the world's first large-scale camel dairy farm for a 2-yr period, to compare the results of 2 methods for the enumeration of SCC, to evaluate correlation among milk quality indicators, and to determine the effect of specific factors (year, season, stage of lactation, and level of production) on milk quality indicators. The study was conducted from January 2008 to January 2010. Total viable count (TVC), coliform count (CC), California Mastitis Test (CMT) score, and SCC were determined from daily bulk milk samples. Somatic cell count was measured by using a direct microscopic method and with an automatic cell counter. In addition, production parameters [total daily milk production (TDM, kg), number of milking camels (NMC), average milk per camel (AMC, kg)] and stage of lactation (average postpartum days, PPD) were recorded for each test day. A strong correlation (r=0.33) was found between the 2 methods for SCC enumeration; however, values derived using the microscopic method were higher. The geometric means of SCC and TVC were 394×10(3) cells/mL and 5,157 cfu/mL during the observation period, respectively. Somatic cell count was >500×10(3) cells/mL on 14.6% (106/725) and TVC was >10×10(3) cfu/mL on 4.0% (30/742) of the test days. Both milk quality indicators had a distinct seasonal pattern. For log SCC, the mean was lowest in summer and highest in autumn. The seasonal pattern of log TVC was slightly different, with the lowest values being recorded during the spring. The monthly mean TVC pattern showed a clear difference between years. Coliform count was <10 cfu/mL in most of the samples (709/742, 95.6%). A positive correlation was found between log SCC and log TVC (r=0.32), between log SCC and CMT score (r=0.26), and between log TVC and CC in yr 1 (r=0.30). All production parameters and stage of lactation showed strong seasonal variation. Log SCC was negatively correlated with TDM (r=-0.35), AMC (r=-0.37), and NMC (r=-0.15) and positively correlated with PPD (r=0.40). Log TVC had a negative correlation with AMC (r=-0.40) but a positive correlation with NMC (r=0.32), TDM (r=0.16), and PPD (r=0.45). The linear mixed model with stepwise variable selection showed that the main sources of log SCC variation were PPD, TDM, PPD × season, and season. For log TVC, the same factors and year contributed to the variation. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Fabrication and energy harvesting characteristics of unimorph piezoelectric cantilever generators with interdigitated electrode lead zirconate titanate laminates

NASA Astrophysics Data System (ADS)

Lee, Min-seon; Yun, Ji-sun; Park, Woon-ik; Hong, Youn-woo; Cho, Jeong-ho; Paik, Jong-hoo; Park, Yong Ho; Son, Chun-myung; Jeong, Young Hun

2017-12-01

Interdigitated electrode (IDE) unimorph piezoelectric cantilever generators (UPCGs) were fabricated and their energy harvesting characteristics were investigated. A hard lead zirconate titanate (PZT) material with a high mechanical quality factor (Q m) of 1280 was used for the active piezoelectric film of the IDE UPCGs. Two different laminated IDE UPCGs were prepared; one has Ag/Pd interdigitated electrode (IDE) formed only on the top and bottom PZT sheets (D-IDE), while the other has Ag/Pd IDE on all of the PZT sheets (M-IDE). Cofiring was conducted at 1050 °C for 2 h for PZT laminates with IDEs. The fabricated IDE UPCGs exhibited power densities of 50.4 µW/cm3 for the D-IDE and 820 µW/cm3 for the M-IDE. The UPCG with the M-IDE exhibited a higher performance than that with the D-IDE. Specifically, a significantly enhanced normalized power factor of 670 µW/(g2·cm3) was found at 118 Hz across 100 kΩ.

Quality of life in cancer patients undergoing anticoagulant treatment with LMWH for venous thromboembolism: the QUAVITEC study on behalf of the Groupe Francophone Thrombose et Cancer (GFTC).

PubMed

Farge, Dominique; Cajfinger, Francis; Falvo, Nicolas; Berremili, Toufek; Couturaud, Francis; Bensaoula, Okba; Védrine, Lionel; Bensalha, Hocine; Bonnet, Isabelle; Péré-Vergé, Denis; Coudurier, Marie; Li, Veronique; Rafii, Hanadi; Benzidia, Ilham; Connors, Jean M; Resche-Rigon, Matthieu

2018-06-05

Clinical guidelines recommend at least 3-months low molecular weight heparin (LMWH) treatment for established venous thromboembolism (VTE) in cancer patients. However, no study has analyzed the impact of 3-6 months of LMWH therapy on quality-of-life (QoL) in cancer patients. Among 400 cancer patients included at M0, 88.8% received long-term LMWH. Using a random-effects linear regression model with time as covariate, QoL scores in the MOS SF-36 (Global HRQoL, 1.3-fold per month [95% confidence interval (CI) 0.81-1.79], p < 0.0001) and EORTC QLQ-C30 (global health status/qol, 2.25-fold per month [95% CI 1.63-2.88]; p < 0.0001) questionnaires significantly improved over the 6-month study period in patients treated with LMWH, while VEINES-QOL scores did not change. In the MOS SF-36 and EORTC QLQ-C30, the following factors were associated with change in QoL: symptomatic VTE, cancer dissemination and histological type. Factors pertaining to reduced mobility were also identified as significant predictors of QoL outcomes, including being bedridden in the MOS SF-36 and ECOG score ≥ 2 in the EORTC QLQ-C30. Presence of acute infection and not undergoing anti-angiogenic therapy were additional factors associated with QoL improvement in the EORTC QLQ-C30. QUAVITEC, a prospective, longitudinal, multicenter study, recruited all consecutive eligible adult cancer patients with objectively confirmed VTE between February 2011 and 2012. Patients were asked to answer three QoL questionnaires at anticoagulant treatment initiation (M0) and at 3 (M3) and 6 (M6)-month follow-ups. QUAVITEC is the first study to show that QoL was improved in cancer patients receiving long-term LMWH treatment for established VTE.

Sediment delivery estimates in water quality models altered by resolution and source of topographic data.

PubMed

Beeson, Peter C; Sadeghi, Ali M; Lang, Megan W; Tomer, Mark D; Daughtry, Craig S T

2014-01-01

Moderate-resolution (30-m) digital elevation models (DEMs) are normally used to estimate slope for the parameterization of non-point source, process-based water quality models. These models, such as the Soil and Water Assessment Tool (SWAT), use the Universal Soil Loss Equation (USLE) and Modified USLE to estimate sediment loss. The slope length and steepness factor, a critical parameter in USLE, significantly affects sediment loss estimates. Depending on slope range, a twofold difference in slope estimation potentially results in as little as 50% change or as much as 250% change in the LS factor and subsequent sediment estimation. Recently, the availability of much finer-resolution (∼3 m) DEMs derived from Light Detection and Ranging (LiDAR) data has increased. However, the use of these data may not always be appropriate because slope values derived from fine spatial resolution DEMs are usually significantly higher than slopes derived from coarser DEMs. This increased slope results in considerable variability in modeled sediment output. This paper addresses the implications of parameterizing models using slope values calculated from DEMs with different spatial resolutions (90, 30, 10, and 3 m) and sources. Overall, we observed over a 2.5-fold increase in slope when using a 3-m instead of a 90-m DEM, which increased modeled soil loss using the USLE calculation by 130%. Care should be taken when using LiDAR-derived DEMs to parameterize water quality models because doing so can result in significantly higher slopes, which considerably alter modeled sediment loss. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

Drinking water system treatment and contamination in Shatila Refugee Camp in Beirut, Lebanon.

PubMed

Khoury, S; Graczyk, T; Burnham, G; Jurdi, M; Goldman, L

2016-11-02

Drinking water at Shatila Palestinian Refugee Camp in Beirut, Lebanon is of poor quality and unpredictably intermittent quantity. We aimed to characterize drinking water sources and contamination at Shatila and determine how drinking water can be managed to reduce community health burdens. We interviewed the Popular Committee, well owners, water vendors, water shopkeepers and preschool administrators about drinking water sources, treatment methods and the population served. Water samples from the sources and intermediaries were analysed for thermotolerant faecal coliforms (FCs), Giardia lamblia, Cryptosporidium parvum and microsporidia, using immunofluorescent antibody detection for G. lamblia and C. parvum, and chromotrope-2 stain for microsporidia. All drinking water sources were contaminated with FCs and parasites. FC counts (cfu/mL) were as follows: wells (35-300), water vendors (2-178), shops (30-300) and preschools (230-300). Responsible factors identified included: unskilled operators; improper maintenance of wells and equipment; lack of proper water storage and handling; and misperception of water quality. These factors must be addressed to improve water quality at Shatila and other refugee camps.

Mid-infrared ultra-high-Q resonators based on fluoride crystalline materials

NASA Astrophysics Data System (ADS)

Lecaplain, C.; Javerzac-Galy, C.; Gorodetsky, M. L.; Kippenberg, T. J.

2016-11-01

The unavailability of highly transparent materials in the mid-infrared has been the main limitation in the development of ultra-sensitive molecular sensors or cavity-based spectroscopy applications. Whispering gallery mode microresonators have attained ultra-high-quality (Q) factor resonances in the near-infrared and visible. Here we report ultra-high Q factors in the mid-infrared using polished alkaline earth metal fluoride crystals. Using an uncoated chalcogenide tapered fibre as a high-ideality coupler in the mid-infrared, we study via cavity ringdown technique the losses of BaF2, CaF2, MgF2 and SrF2 microresonators. We show that MgF2 is limited by multiphonon absorption by studying the temperature dependence of the Q factor. In contrast, in SrF2 and BaF2 the lower multiphonon absorption leads to ultra-high Q factors at 4.5 μm. These values correspond to an optical finesse of , the highest value achieved for any type of mid-infrared resonator to date.

Mid-infrared ultra-high-Q resonators based on fluoride crystalline materials

PubMed Central

Lecaplain, C.; Javerzac-Galy, C.; Gorodetsky, M. L.; Kippenberg, T. J.

2016-01-01

The unavailability of highly transparent materials in the mid-infrared has been the main limitation in the development of ultra-sensitive molecular sensors or cavity-based spectroscopy applications. Whispering gallery mode microresonators have attained ultra-high-quality (Q) factor resonances in the near-infrared and visible. Here we report ultra-high Q factors in the mid-infrared using polished alkaline earth metal fluoride crystals. Using an uncoated chalcogenide tapered fibre as a high-ideality coupler in the mid-infrared, we study via cavity ringdown technique the losses of BaF2, CaF2, MgF2 and SrF2 microresonators. We show that MgF2 is limited by multiphonon absorption by studying the temperature dependence of the Q factor. In contrast, in SrF2 and BaF2 the lower multiphonon absorption leads to ultra-high Q factors at 4.5 μm. These values correspond to an optical finesse of , the highest value achieved for any type of mid-infrared resonator to date. PMID:27869119

Mid-infrared ultra-high-Q resonators based on fluoride crystalline materials.

PubMed

Lecaplain, C; Javerzac-Galy, C; Gorodetsky, M L; Kippenberg, T J

2016-11-21

The unavailability of highly transparent materials in the mid-infrared has been the main limitation in the development of ultra-sensitive molecular sensors or cavity-based spectroscopy applications. Whispering gallery mode microresonators have attained ultra-high-quality (Q) factor resonances in the near-infrared and visible. Here we report ultra-high Q factors in the mid-infrared using polished alkaline earth metal fluoride crystals. Using an uncoated chalcogenide tapered fibre as a high-ideality coupler in the mid-infrared, we study via cavity ringdown technique the losses of BaF 2 , CaF 2 , MgF 2 and SrF 2 microresonators. We show that MgF 2 is limited by multiphonon absorption by studying the temperature dependence of the Q factor. In contrast, in SrF 2 and BaF 2 the lower multiphonon absorption leads to ultra-high Q factors at 4.5 μm. These values correspond to an optical finesse of , the highest value achieved for any type of mid-infrared resonator to date.

Lifestyle-related factors, obesity, and incident microalbuminuria: the CARDIA (Coronary Artery Risk Development in Young Adults) study.

PubMed

Chang, Alex; Van Horn, Linda; Jacobs, David R; Liu, Kiang; Muntner, Paul; Newsome, Britt; Shoham, David A; Durazo-Arvizu, Ramon; Bibbins-Domingo, Kirsten; Reis, Jared; Kramer, Holly

2013-08-01

Modifiable lifestyle-related factors are associated with risk of coronary heart disease and may also influence kidney disease risk. Community-based prospective cohort study. 2,354 African American and white participants aged 28-40 years without baseline microalbuminuria or estimated glomerular filtration rate <60 mL/min/1.73 m² recruited from 4 US centers: Birmingham, AL; Chicago, IL; Minneapolis, MN; and Oakland, CA. Current smoking, physical activity, fast food habits, obesity, and diet quality, which was based on 8 fundamental components of the Dietary Approaches to Stop Hypertension (DASH) diet, including increased intake of fruits, vegetables, low-fat dairy products, whole grains, and nuts and legumes and reduced intake of sodium, sugar-sweetened beverages, and red and processed meats. Spot urine albumin-creatinine ratios were obtained at baseline (1995-1996) and three 5-year follow-up examinations (5, 10, and 15 years' follow-up). Incident microalbuminuria was defined as the presence of age- and sex-adjusted albumin-creatinine ratio ≥25 mg/g at 2 or more of the successive follow-up examinations. During the 15-year follow-up, 77 (3.3%) individuals developed incident microalbuminuria. After multivariable adjustment, poor diet quality (OR, 2.0; 95% CI, 1.1-3.4) and obesity (OR, 1.9; 95% CI, 1.1-3.3) were associated significantly with microalbuminuria; current smoking (OR, 1.6; 95% CI, 0.9-2.8) was associated with microalbuminuria, although the CI crossed 1.0. Neither low physical activity (OR, 1.0; 95% CI, 0.5-1.8) nor fast food consumption (OR, 1.2; 95% CI, 0.7-2.3) was associated with microalbuminuria. Compared with individuals with no unhealthy lifestyle-related factors (poor diet quality, current smoking, and obesity), adjusted odds of incident microalbuminuria were 131%, 273%, and 634% higher for the presence of 1 (OR, 2.3; 95% CI, 1.3-4.3), 2 (OR, 3.7; 95% CI, 1.8-7.7), and 3 (OR, 7.3; 95% CI, 2.1-26.1) unhealthy lifestyle-related factors. Self-reported dietary history and physical activity, low number of outcomes. Consuming an unhealthy diet and obesity are associated with incident microalbuminuria. Copyright © 2013 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

Wideband nonlinear spectral broadening in ultra-short ultra - silicon rich nitride waveguides.

PubMed

Choi, Ju Won; Chen, George F R; Ng, D K T; Ooi, Kelvin J A; Tan, Dawn T H

2016-06-08

CMOS-compatible nonlinear optics platforms with high Kerr nonlinearity facilitate the generation of broadband spectra based on self-phase modulation. Our ultra - silicon rich nitride (USRN) platform is designed to have a large nonlinear refractive index and low nonlinear losses at 1.55 μm for the facilitation of wideband spectral broadening. We investigate the ultrafast spectral characteristics of USRN waveguides with 1-mm-length, which have high nonlinear parameters (γ ∼ 550 W(-1)/m) and anomalous dispersion at 1.55 μm wavelength of input light. USRN add-drop ring resonators broaden output spectra by a factor of 2 compared with the bandwidth of input fs laser with the highest quality factors of 11000 and 15000. Two - fold self phase modulation induced spectral broadening is observed using waveguides only 430 μm in length, whereas a quadrupling of the output bandwidth is observed with USRN waveguides with a 1-mm-length. A broadening factor of around 3 per 1 mm length is achieved in the USRN waveguides, a value which is comparatively larger than many other CMOS-compatible platforms.

Dual Q-switched laser outputs from a single lasing medium using an intracavity MEMS micromirror array.

PubMed

Bauer, Ralf; Lubeigt, Walter; Uttamchandani, Deepak

2012-09-01

An intracavity array of individually controlled microelectromechanical system scanning micromirrors was used to actively Q-switch a single side-pumped Nd:YAG gain medium. Two equal power independent laser outputs were simultaneously obtained by separate actuation of two adjacent micromirrors with a combined average output power of 125 mW. Pulse durations of 28 ns FWHM at 8.7 kHz repetition frequency and 34 ns FWHM at 7.9 kHz repetition frequency were observed for the two output beams with beam quality factors M2 of 1.2 and 1.1 and peak powers of 253 W and 232 W, respectively.

Characterizing air quality data from complex network perspective.

PubMed

Fan, Xinghua; Wang, Li; Xu, Huihui; Li, Shasha; Tian, Lixin

2016-02-01

Air quality depends mainly on changes in emission of pollutants and their precursors. Understanding its characteristics is the key to predicting and controlling air quality. In this study, complex networks were built to analyze topological characteristics of air quality data by correlation coefficient method. Firstly, PM2.5 (particulate matter with aerodynamic diameter less than 2.5 μm) indexes of eight monitoring sites in Beijing were selected as samples from January 2013 to December 2014. Secondly, the C-C method was applied to determine the structure of phase space. Points in the reconstructed phase space were considered to be nodes of the network mapped. Then, edges were determined by nodes having the correlation greater than a critical threshold. Three properties of the constructed networks, degree distribution, clustering coefficient, and modularity, were used to determine the optimal value of the critical threshold. Finally, by analyzing and comparing topological properties, we pointed out that similarities and difference in the constructed complex networks revealed influence factors and their different roles on real air quality system.

Impact of weight reduction on eating behaviors and quality of life: Influence of the obesity degree.

PubMed

Riesco, Eléonor; Rossel, Nadia; Rusques, Coralie; Mirepoix, Marie; Drapeau, Vicky; Sanguignol, Frédéric; Mauriège, Pascale

2009-01-01

To examine the effects of a short-term weight reducing program on body composition, eating behaviors, and health-related quality of life (HRQL) of sedentary obese women characterized by different obesity degrees. 44 women with a BMI under 34.9 kg/m(2) and 39 women with a BMI above 35 kg/m(2) were studied. Fat mass and lean mass (electrical bioimpedance), eating behaviors (Three-Factor Eating Questionnaire), and HRQL (36-item short form, SF-36, questionnaire) were determined before and after weight loss. Disinhibition and hunger scores and their subscales decreased after weight loss in both groups (0.0001 < p < 0.04). Restriction increased after weight reduction in all women (p = 0.02). Among the five restriction subscales, flexible restriction increased in women with a BMI above 35 kg/m(2) (p = 0.008), whereas rigid restraint and avoidance of fattening foods increased in both groups (0.006 < p < 0.02). SF-36 Mental Component Score increased after weight loss in all women (p < 0.0001). A 3week weight reducing program changes selected eating behaviors and components of HRQL, irrespective of women's obesity degree. Data suggest that women with a BMI above 35 kg/m(2) could have a better weight control in the long term because of their higher flexible restriction after weight loss when compared to those whose BMI was under 34.9 kg/m(2). 2009 S. Karger AG, Basel.

Single-crystal diamond nanomechanical resonators with quality factors exceeding one million

NASA Astrophysics Data System (ADS)

Tao, Y.; Boss, J. M.; Moores, B. A.; Degen, C. L.

2014-04-01

Diamond has gained a reputation as a uniquely versatile material, yet one that is intricate to grow and process. Resonating nanostructures made of single-crystal diamond are expected to possess excellent mechanical properties, including high-quality factors and low dissipation. Here we demonstrate batch fabrication and mechanical measurements of single-crystal diamond cantilevers with thickness down to 85 nm, thickness uniformity better than 20 nm and lateral dimensions up to 240 μm. Quality factors exceeding one million are found at room temperature, surpassing those of state-of-the-art single-crystal silicon cantilevers of similar dimensions by roughly an order of magnitude. The corresponding thermal force noise for the best cantilevers is ~5·10-19 N Hz-1/2 at millikelvin temperatures. Single-crystal diamond could thus directly improve existing force and mass sensors by a simple substitution of resonator material. Presented methods are easily adapted for fabrication of nanoelectromechanical systems, optomechanical resonators or nanophotonic devices that may lead to new applications in classical and quantum science.

Prenatal physical activity and diet composition affect the expression of nutrient transporters and mTOR signaling molecules in the human placenta.

PubMed

Brett, K E; Ferraro, Z M; Holcik, M; Adamo, K B

2015-02-01

Adequate nutrient delivery to the fetus is essential for optimal growth. Differences in prenatal physical activity level and diet quality influence maternal energy balance and these factors may alter placental nutrient transport. We investigated the associations between meeting physical activity guidelines and the quality of maternal diet on the expression of genes involved in fatty acid, amino acid and glucose transport, and mammalian target of rapamycin (mTOR) and insulin signaling in the placenta from 16 term pregnancies. Physical activity was directly measured with accelerometry, diet composition was assessed with 24 h dietary recalls, and gene expression was measured with custom polymerase chain reaction (PCR) arrays. Women who met physical activity guidelines had lower gene expression of fatty acid transport protein 4 (FATP4), insulin-like growth factor 1 (IGF1), and the beta non-catalytic subunit of AMP-activated protein kinase (AMPK), and a higher expression of SNAT2. There was a strong positive correlation observed between total sugar intake and glucose transporter 1 (GLUT1) (r = 0.897, p = 0.000, n = 12), and inverse correlations between total sugar and mTOR and IGF1 expression. Percentage of total calories from protein was inversely related to insulin-like growth factor 1 receptor (IGF1R) (r = -0.605, p = 0.028, n = 13). Variations in maternal physical activity and diet composition altered the expression of genes involved in fatty acid, amino acid and glucose transport and mTOR signaling. Future research on placental nutrient transport should include direct measures of maternal PA and dietary habits to help eliminate confounding factors. Copyright © 2014 Elsevier Ltd. All rights reserved.

Large-mode-area single-mode-output Neodymium-doped silicate glass all-solid photonic crystal fiber

PubMed Central

Li, Wentao; Chen, Danping; Qinling, Zhou; Hu, Lili

2015-01-01

We have demonstrated a 45 μm core diameter Neodymium-doped all-solid silicate glass photonic crystal fiber laser with a single mode laser output. The structure parameters and modes information of the fiber are both demonstrated by theoretical calculations using Finite Difference Time Domain (FDTD) method and experimental measurements. Maximum 0.8 W output power limited by launched pump power has been generated in 1064 nm with laser beam quality factor M2 1.18. PMID:26205850

Improvement of optical quality of semipolar (11 2 ¯ 2 ) GaN on m-plane sapphire by in-situ epitaxial lateral overgrowth

NASA Astrophysics Data System (ADS)

Monavarian, Morteza; Izyumskaya, Natalia; Müller, Marcus; Metzner, Sebastian; Veit, Peter; Can, Nuri; Das, Saikat; Özgür, Ümit; Bertram, Frank; Christen, Jürgen; Morkoç, Hadis; Avrutin, Vitaliy

2016-04-01

Among the major obstacles for development of non-polar and semipolar GaN structures on foreign substrates are stacking faults which deteriorate the structural and optical quality of the material. In this work, an in-situ SiNx nano-network has been employed to achieve high quality heteroepitaxial semipolar (11 2 ¯ 2 ) GaN on m-plane sapphire with reduced stacking fault density. This approach involves in-situ deposition of a porous SiNx interlayer on GaN that serves as a nano-mask for the subsequent growth, which starts in the nanometer-sized pores (window regions) and then progresses laterally as well, as in the case of conventional epitaxial lateral overgrowth (ELO). The inserted SiNx nano-mask effectively prevents the propagation of defects, such as dislocations and stacking faults, in the growth direction and thus reduces their density in the overgrown layers. The resulting semipolar (11 2 ¯ 2 ) GaN layers exhibit relatively smooth surface morphology and improved optical properties (PL intensity enhanced by a factor of 5 and carrier lifetimes by 35% to 85% compared to the reference semipolar (11 2 ¯ 2 ) GaN layer) which approach to those of the c-plane in-situ nano-ELO GaN reference and, therefore, holds promise for light emitting and detecting devices.

Psychometric evaluation of the Generalized Anxiety Disorder Screener GAD-7, based on a large German general population sample.

PubMed

Hinz, Andreas; Klein, Annette M; Brähler, Elmar; Glaesmer, Heide; Luck, Tobias; Riedel-Heller, Steffi G; Wirkner, Kerstin; Hilbert, Anja

2017-03-01

The Generalized Anxiety Disorder Scales GAD-7 and GAD-2 are instruments for the assessment of anxiety. The aims of this study are to test psychometric properties of these questionnaires, to provide normative values, and to investigate associations with sociodemographic factors, quality of life, psychological variables, and behavioral factors. A German community sample (n=9721) with an age range of 18-80 years was surveyed using the GAD-7 and several other questionnaires. Confirmatory factor analyses confirmed the unidimensionality and measurement invariance of the GAD-7 across age and gender. Females were more anxious than males (mean scores: M=4.07 vs. M=3.01; effect size: d=0.33). There was no linear age trend. A total of 5.9% fulfilled the cut-off criterion of 10 and above. Anxiety was correlated with low quality of life, fatigue, low habitual optimism, physical complaints, sleep problems, low life satisfaction, low social support, low education, unemployment, and low income. Cigarette smoking and alcohol consumption were also associated with heightened anxiety, especially in women. When comparing the GAD-7 (7 items) with the ultra-short GAD-2 (2 items), the GAD-7 instrument was superior to the GAD-2 regarding several psychometric criteria. The response rate (33%) was low. Because of the cross-sectional character of the study, causal conclusions cannot be drawn. A further limitation is the lack of a gold standard for diagnosing anxiety. The GAD-7 can be recommended for use in clinical research and routine. Copyright © 2017 Elsevier B.V. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beck, M. A., E-mail: mabeck2@wisc.edu; Isaacs, J. A.; Booth, D.

We describe the design and characterization of superconducting coplanar waveguide cavities tailored to facilitate strong coupling between superconducting quantum circuits and single trapped Rydberg atoms. For initial superconductor–atom experiments at 4.2 K, we show that resonator quality factors above 10{sup 4} can be readily achieved. Furthermore, we demonstrate that the incorporation of thick-film copper electrodes at a voltage antinode of the resonator provides a route to enhance the zero-point electric fields of the resonator in a trapping region that is 40 μm above the chip surface, thereby minimizing chip heating from scattered trap light. The combination of high resonator quality factor andmore » strong electric dipole coupling between the resonator and the atom should make it possible to achieve the strong coupling limit of cavity quantum electrodynamics with this system.« less

On the tunability of quality-factor for optical Tamm plasmon modes

NASA Astrophysics Data System (ADS)

Kumar, Samir; Das, Ritwick

2017-09-01

We present a comprehensive investigation to ascertain the impact of gold and silver films on modifying the quality-factor (Q-factor) of optical Tamm-plasmon (OTP) resonance in a metal-distributed Bragg reflector (M-DBR) geometry. Here, OTP mode is excited using direct incidence of white-light-source at normal incidence as well as oblique incidence on M-DBR geometry. The lifetime of OTP in gold and silver deposited films on DBR mirror was determined from OTP resonance linewidth. The lifetime and the Q-factor of OTP modes are found to depend on DBR bilayers, metal film thickness as well as on different plasmon active metals. This finding would facilitate tuning the Q-factor and consequently, the lifetime of OTP modes for various applications in all-optical switches and modulators. In addition, we discuss the spectral characteristics of OTP modes excited using normal and oblique incident of source.

Particle size distribution and air pollution patterns in three urban environments in Xi'an, China.

PubMed

Niu, Xinyi; Guinot, Benjamin; Cao, Junji; Xu, Hongmei; Sun, Jian

2015-10-01

Three urban environments, office, apartment and restaurant, were selected to investigate the indoor and outdoor air quality as an inter-comparison in which CO2, particulate matter (PM) concentration and particle size ranging were concerned. In this investigation, CO2 level in the apartment (623 ppm) was the highest among the indoor environments and indoor levels were always higher than outdoor levels. The PM10 (333 µg/m(3)), PM2.5 (213 µg/m(3)), PM1 (148 µg/m(3)) concentrations in the office were 10-50% higher than in the restaurant and apartment, and the three indoor PM10 levels all exceeded the China standard of 150 µg/m(3). Particles ranging from 0.3 to 0.4 µm, 0.4 to 0.5 µm and 0.5 to 0.65 µm make largest contribution to particle mass in indoor air, and fine particles number concentrations were much higher than outdoor levels. Outdoor air pollution is mainly affected by heavy traffic, while indoor air pollution has various sources. Particularly, office environment was mainly affected by outdoor sources like soil dust and traffic emission; apartment particles were mainly caused by human activities; restaurant indoor air quality was affected by multiple sources among which cooking-generated fine particles and the human steam are main factors.

Quality assurance in mammography: College of Radiology Survey in Malaysia.

PubMed

Ho, E L M; Ng, K H; Wong, J H D; Wang, H B

2006-06-01

Malaysia's mammography QA practice was surveyed based on the Malaysian Ministry of Health and the American College of Radiology (ACR) requirements. Data on mammography unit, processor, image receptor, exposure factors, mean glandular dose (MGD), sensitometry, image quality and viewbox luminance were obtained. Mean developer temperature and cycle time were 34.1 +/- 1.8degreesC and 107.7 +/- 33.2 seconds. Mean base+fog level, speed index and contrast index were 0.20+/-0.01, 1.20+/-0.01 and 1.33+/-0.26 respectively. Eighty-six percent of the fifty centres passed the image quality test while 12.5% complied with ACR recommended viewbox luminance. Average MGD was 1.0+/-0.4 mGy. Malaysia is on the right track for QA but with room for total quality improvement.

Analysis of the Effects of Five Factors Relevant to In Vitro Chondrogenesis of Human Mesenchymal Stem Cells Using Factorial Design and High Throughput mRNA-Profiling

PubMed Central

Jakobsen, Rune B.; Østrup, Esben; Zhang, Xiaolan; Mikkelsen, Tarjei S.; Brinchmann, Jan E.

2014-01-01

The in vitro process of chondrogenic differentiation of mesenchymal stem cells for tissue engineering has been shown to require three-dimensional culture along with the addition of differentiation factors to the culture medium. In general, this leads to a phenotype lacking some of the cardinal features of native articular chondrocytes and their extracellular matrix. The factors used vary, but regularly include members of the transforming growth factor β superfamily and dexamethasone, sometimes in conjunction with fibroblast growth factor 2 and insulin-like growth factor 1, however the use of soluble factors to induce chondrogenesis has largely been studied on a single factor basis. In the present study we combined a factorial quality-by-design experiment with high-throughput mRNA profiling of a customized chondrogenesis related gene set as a tool to study in vitro chondrogenesis of human bone marrow derived mesenchymal stem cells in alginate. 48 different conditions of transforming growth factor β 1, 2 and 3, bone morphogenetic protein 2, 4 and 6, dexamethasone, insulin-like growth factor 1, fibroblast growth factor 2 and cell seeding density were included in the experiment. The analysis revealed that the best of the tested differentiation cocktails included transforming growth factor β 1 and dexamethasone. Dexamethasone acted in synergy with transforming growth factor β 1 by increasing many chondrogenic markers while directly downregulating expression of the pro-osteogenic gene osteocalcin. However, all factors beneficial to the expression of desirable hyaline cartilage markers also induced undesirable molecules, indicating that perfect chondrogenic differentiation is not achievable with the current differentiation protocols. PMID:24816923

Protocol and Demonstrations of Probabilistic Reliability Assessment for Structural Health Monitoring Systems (Preprint)

DTIC Science & Technology

2011-11-01

assessment to quality of localization/characterization estimates. This protocol includes four critical components: (1) a procedure to identify the...critical factors impacting SHM system performance; (2) a multistage or hierarchical approach to SHM system validation; (3) a model -assisted evaluation...Lindgren, E. A ., Buynak, C. F., Steffes, G., Derriso, M., “ Model -assisted Probabilistic Reliability Assessment for Structural Health Monitoring

980 nm tapered lasers with photonic crystal structure for low vertical divergence

NASA Astrophysics Data System (ADS)

Ma, Xiaolong; Qu, Hongwei; Zhao, Pengchao; Liu, Yun; Zheng, Wanhua

2016-10-01

High power tapered lasers with nearly diffraction-limited beam quality have attracted much attention in numerous applications such as nonlinear frequency conversion, optical pumping of solid-state and fiber lasers, medical treatment and others. However, the large vertical divergence of conventional tapered lasers is a disadvantage, which makes beam shaping difficult and expensive in applications. Diode lasers with photonic crystal structure can achieve a large mode size and a narrow vertical divergence. In this paper, we present tapered lasers with photonic crystal structure emitting at 980 nm. The epitaxial layer is grown using metal organic chemical vapor deposition. The device has a total cavity length of 2 mm, which consists of a 400-um long ridge-waveguide section and a 1600-um long tapered section. The taper angle is 4°. An output power of 3.3 W is achieved with a peak conversion efficiency of 35% in pulsed mode. The threshold current is 240 mA and the slope efficiency is 0.78 W/A. In continuous wave mode, the output power is 2.87 W, which is limited by a suddenly failure resulting from catastrophic optical mirror damage. The far field divergences with full width at half maximum are 12.3° in the vertical direction and 2.9° in the lateral direction at 0.5 A. At high injection level the vertical divergence doesn't exceed 16°. Beam quality factor M2 is measured based on second moment definition in CW mode. High beam quality is demonstrated by M2 value of less than 2 in both vertical and lateral directions.

Factors Associated with Quality of Life among Hemodialysis Patients in Malaysia

PubMed Central

Md. Yusop, Nor Baizura; Yoke Mun, Chan; Shariff, Zalilah Mohd; Beng Huat, Choo

2013-01-01

Although hemodialysis treatment has greatly increased the life expectancy of end stage renal disease patients, low quality of life among hemodialysis patients is frequently reported. This cross-sectional study aimed to determine the relationship between medical history, hemodialysis treatment and nutritional status with the mental and physical components of quality of life in hemodialysis patients. Respondents (n=90) were recruited from Hospital Kuala Lumpur and dialysis centres of the National Kidney Foundation of Malaysia. Data obtained included socio-demography, medical history, hemodialysis treatment and nutritional status. Mental and physical quality of life were measured using the Mental Composite Summary (MCS) and Physical Composite Summary (PCS) of the Short-Form Health Survey 36-items, a generic core of the Kidney Disease Quality of Life Short Form. Two summary measures and total SF-36 was scored as 0–100, with a higher score indicating better quality of life. Approximately 26 (30%) of respondents achieved the body mass index (24 kg/m2) and more than 80% (n=77) achieved serum albumin level (>35.0 mg/dL) recommended for hemodialysis patients. The majority of respondents did not meet the energy (n=72, 80%) and protein (n=68,75%) recommendations. The total score of SF-36 was 54.1±19.2, while the score for the mental and physical components were 45.0±8.6 and 39.6±8.6, respectively. Factors associated with a higher MCS score were absence of diabetes mellitus (p=0.000) and lower serum calcium (p=0.004), while higher blood flow (p=0.000), higher serum creatinine (p=0.000) and lower protein intake (p=0.006) were associated with a higher PCS score. To improve the overall quality of life of hemodialysis patients, a multidisciplinary intervention that includes medical, dietetic and psychosocial strategies that address factors associated with mental and physical quality of life are warranted to reduce further health complications and to improve quality of life. PMID:24358336

Trajectories and associated factors of quality of life, global outcome, and post-concussion symptoms in the first year following mild traumatic brain injury.

PubMed

Chiang, Chia-Chen; Guo, Su-Er; Huang, Kuo-Chang; Lee, Bih-O; Fan, Jun-Yu

2016-08-01

To investigate the associated factors and change trajectories of quality of life (QoL), global outcome, and post-concussion symptoms (PCS) over the first year following mild traumatic brain injury (mTBI). This was a prospective longitudinal study of 100 participants with mTBI from neurosurgical outpatient departments in Chiayi County District Hospitals in Taiwan. The checklist of post-concussion syndromes (CPCS) was used to assess PCS at enrollment and at 1, 3, and 12 months after mTBI; the glasgow outcome scale extended (GOSE), the quality of life after brain injured (QOLIBRI), Chinese version, and the Short Form 36 Health Survey (SF-36), Taiwan version, were used to assess mTBI global outcome and QoL at 1, 3, and 12 months after mTBI. Latent class growth models (LCGMs) indicated the change trajectories of QOLIBRI, PCS SF-36, MCS SF-36, GOSE, and PCS. Classes of trajectory were associated with age ≥40 years, unemployment at 1 month after injury, and educational level ≤12 years. Univariate analysis revealed that employment status at 1 month post-injury was correlated with the trajectories of QOLIBRI, PCS SF-36, MCS SF-36, and GOSE, but not PCS. Employment status was the most crucial associated factor for QoL in individuals with mTBI at the 1-year follow-up. Future studies should explore the benefits of employment on QoL of individuals with mTBI.

Influence of gantry rotation time and scan mode on image quality in ultra-high-resolution CT system.

PubMed

Honda, Osamu; Yanagawa, Masahiro; Hata, Akinori; Kikuchi, Noriko; Miyata, Tomo; Tsukagoshi, Shinsuke; Uranishi, Ayumi; Tomiyama, Noriyuki

2018-06-01

To investigate the image quality of helical scan (HS) mode and non-helical scan (non-HS) mode on ultra-high-resolution CT in different gantry rotation time. non-HS with 0.35 s/rot (non-HS200 mA/0.35 s). Three observers compared each non-HS image with HS image, and scored non-HS images by using 3-point scale, paying attention to normal findings, abnormal findings, noise, streak artifact, and overall image quality. Statistical analysis was performed with Steel-Dwass test. Overall image quality (score: 2.45) and noise (score: 2.42) of non-HS 200 mA/1.5s was statistically best (p < 0.0005). Overall Image quality and noise of non-HS200 mA/0.75 s (score: 2.0) was comparable to that of HS200 mA/1.5 s. CTDIvol of HS200 mA/1.5 s is 23.2 mGy. CTDIvol of non-HS200 mA/1.5 s, non-HS200 mA/0.75 s, non-HS200 mA/0.35 s is 19.2 mGy, 9.8 mGy, 4.7 mGy. Overall image quality and noise of non-helical scan is better than that of helical scan in the same rotation time. Overall Image quality of non-HS200 mA/0.75 s is comparable to that of HS200 mA/1.5 s, though the radiation dose of non-HS200 mA/0.75 s is lower than that of HS200 mA/1.5 s. Copyright © 2018 Elsevier B.V. All rights reserved.

The Electronic CardioMetabolic Program (eCMP) for Patients With Cardiometabolic Risk: A Randomized Controlled Trial

PubMed Central

Koliwad, Suneil; Poon, Tak; Xiao, Lan; Lv, Nan; Griggs, Robert; Ma, Jun

2016-01-01

Background Effective lifestyle interventions targeting high-risk adults that are both practical for use in ambulatory care settings and scalable at a population management level are needed. Objective Our aim was to examine the potential effectiveness, feasibility, and acceptability of delivering an evidence-based Electronic Cardio-Metabolic Program (eCMP) for improving health-related quality of life, improving health behaviors, and reducing cardiometabolic risk factors in ambulatory care high-risk adults. Methods We conducted a randomized, wait-list controlled trial with 74 adults aged ≥18 years recruited from a large multispecialty health care organization. Inclusion criteria were (1) BMI ≥35 kg/m2 and prediabetes, previous gestational diabetes and/or metabolic syndrome, or (2) BMI ≥30 kg/m2 and type 2 diabetes and/or cardiovascular disease. Participants had a mean age of 59.7 years (SD 11.2), BMI 37.1 kg/m2 (SD 5.4) and were 59.5% female, 82.4% white. Participants were randomized to participate in eCMP immediately (n=37) or 3 months later (n=37). eCMP is a 6-month program utilizing video conferencing, online tools, and pre-recorded didactic videos to deliver evidence-based curricula. Blinded outcome assessments were conducted at 3 and 6 months postbaseline. Data were collected and analyzed between 2014 and 2015. The primary outcome was health-related quality of life. Secondary outcomes included biometric cardiometabolic risk factors (eg, body weight), self-reported diet and physical activity, mental health status, retention, session attendance, and participant satisfaction. Results Change in quality of life was not significant in both immediate and delayed participants. Both groups significantly lost weight and reduced waist circumference at 6 months, with some cardiometabolic factors trending accordingly. Significant reduction in self-reported anxiety and perceived stress was seen in the immediate intervention group at 6 months. Retention rate was 93% at 3 months and 86% at 6 months post-baseline. Overall eCMP attendance was high with 59.5-83.8% of immediate and delayed intervention participants attending 50% of the virtual stress management and behavioral lifestyle sessions and 37.8-62.2% attending at least 4 out of 7 in-person physical activity sessions. The intervention received high ratings for satisfaction. Conclusions The technology-assisted eCMP is a feasible and well-accepted intervention and may significantly decrease cardiometabolic risk among high-risk individuals. Trial Registration Clinicaltrials.gov NCT02246400; https://clinicaltrials.gov/ct2/show/NCT02246400 (Archived by WebCite at http://www.webcitation.org/6h6mWWokP) PMID:27234480

A case-control study on the risk factors of urinary calculus in Uyghur children in the Kashi region.

PubMed

Wang, H C; Liu, C; He, H Y; Wang, M X

2015-06-01

The incidence of urinary calculus (UC) is very high in Uyghur children in the Kashi region of Xinjiang, China, which seriously affects the growth and life quality of these children. This study was aimed at investigating the risk factors of UC in Uyghur children in Kashi region. One hundred fifteen Uyghur children (age <7 years) with UC who were treated in First People's Hospital in Kashi were enrolled in the case group. A 1:1 case-control study with a questionnaire was performed. The results showed that, among the 115 UC patients, there were more boys (71.3%) than girls (28.7%), and most cases had an onset age of 1-3 years (75.7%). A lower than primary school education in the mother, drinking unboiled water, water intake <500 mL/day, and eating too much sweets were risk factors [odds ratio (OR) = 2.385, 9.160, 3.263, and 8.945, respectively], whereas vegetable intake and exposure to summer sunshine of <2 h/day were protective factors against UC onset (OR = 0.154 and 0.344, respectively). Analysis of UC-related factors in 99 cases of <3-year-old children revealed that breastfeeding was also a protective factor (OR = 0.007), whereas frequent cow's milk intake within 5 months (OR = 2.414) and frequent "panada" intake (OR = 2.529) were risk factors. The occurrence of UC in Uyghur children in the Kashi region is mainly affected by maternal educational background, quality of drinking water, water intake volume, and dietary pattern. Furthermore, geography may also have a role.

Quality evaluation of banana skin extract jellies.

PubMed

Borges, S V; Valente, W A; Figueiredo, L P; Dias, M V; Pereira, P P; Pereira, A G T; Clemente, P R

2011-04-01

Due to the great volume of banana skin resulting from the industrialization of banana and to their high pectin content, the objectives of the present study were to evaluate the effect of the following factors: extract/sugar, pectin and citric acid on the chemical, physical and sensory qualities of the jellies obtained. A complete factorial experimental design was used (2(3)) with 3 central points to evaluate the influence of the factors on the dependent variables, testing the linear models. The chemical properties underwent few alterations and the instrumental and sensory texture attributes were mainly affected by the extract/sugar ratio and the pectin level. The brittleness, elasticity and gumminess increased with increases in the extract/ sugar ratio and pectin level. According to the sensory analysis and the purchasing intention, the best formulations were those obtained using a higher extract/sugar ratio (60/40) and lower pectin level (0.5 g/ 100), combined with the highest (20 mL) or lowest volumes of citric acid (15 mL), with scores for all the attributes in the range from 'I liked slightly' to 'I liked moderately'.

Sources and Chemical Composition of Atmospheric Fine Particles in Rabigh, Saudi Arabia

NASA Astrophysics Data System (ADS)

Nayebare, S. R.; Aburizaiza, O. S.; Siddique, A.; Hussain, M. M.; Zeb, J.; Khwaja, H. A.

2014-12-01

Air pollution research in Saudi Arabia and the whole of Middle East is at its inception, making air pollution in the region a significant problem. This study presents the first detailed data on fine particulate matter (PM2.5) concentrations of Black Carbon (BC), ions, and trace metals at Rabigh, Saudi Arabia, and assesses their sources. Results showed several characteristic aspects of air pollution at Rabigh. Daily levels of PM2.5 and BC showed significant temporal variability ranging from 12.2 - 75.9 µg/m3 and 0.39 - 1.31 µg/m3, respectively. More than 90% of the time, the daily PM2.5 exceeded the 24 h WHO guideline of 20 µg/m3. Sulfate, NO3-, and NH4+ dominated the identifiable components. Trace metals with significantly higher concentrations included Si, S, Ca, Al, Fe, Na, Cl, Mg, K, and Ti, with average concentrations of 3.1, 2.2, 1.6, 1.2, 1.1, 0.7, 0.7, 0.5, 0.4 and 0.1 µg/m3, respectively. Based on the Air Quality Index (AQI), there were 44% days of moderate air quality, 33% days of unhealthy air quality for sensitive groups, and 23% days of unhealthy air quality throughout the study period. Two categories of aerosol trace metal sources were defined: anthropogenic (S, V, Cr, Ni, Cu, Zn, Br, Cd, Sb, and Pb) and naturally derived elements (Si, Al, and Fe). The extent of anthropogenic contribution was estimated by the degree of enrichment of these elements compared to the crustal composition. Soil resuspension and/or mobilization is an important source of "natural" elements, while "anthropogenic" elements originate primarily from fossil fuel combustion and industries. Ni and V correlated strongly pointing to combustion of heavy fuel oil as the likely source. A positive matrix factorization (PMF) was used to obtain information about possible sources. Our study highlights the need for stringent laws on PM2.5 emission control to protect human health and the environment.

Effect of different kinds of crop residues on aggregate-protected soil organic matter fractions.

NASA Astrophysics Data System (ADS)

Huisz, A.

2009-04-01

Organic matter content of soils determines many important soil properties, such as soil structure, fertility and water-management. To improve its fertility and quality, returning different kinds of organic matter to soil has a long historical tradition. Ameliorating of soil and enhancing its fertility by enhancing its carbon stock with organic matter incorporation (like farmyard manure, crop residues or green manure) are general practices, but the extent of the amelioration depends much on several factors such as quantity, quality of the used organic matters. Quality of soil organic matters is affected by their chemical build-up, which differs by their origin (i.e. plant species); and their decomposability is affected by particle-size, protection by soil aggregates and the extent of their association to mineral surfaces. In our paper we investigated the effect of three different kinds of organic matter incorporation on aggregate-protected organic matter fractions: (1) Maize stem (M), (2) Wheat straw (W), and (3) Maize stem & Wheat straw (MW). Our samples were originated from Keszthely, Western Hungary, where the texture of the investigated soil is Sandy loam, the type of soil is Eutric Cambisol (soil type FAO), or Alfisol (soil type USDA). SOM fractions might be isolated and measured by physical fractionation of soil (Cambardella and Elliott (1992), Jensen et al. (1992)). Firstly, microaggregates were separated according to their particle-size with physical fractionation (i.e. wet sieving) (Six et al. (2000a)). Each sample was pre-treated by capillary wetting and was sieved for 2 min in an analytic sieve shaker machine with the following aperture sizes: 2 mm, 250 μm, 53 μm. Therefore 4 fractions were resulted: (1) the >2000 μm large macro-, (2) the 250-2000 μm small macro-, (3) the 53-250 μm microaggregates, and (4) the

High beam quality of a Q-switched 2-µm Tm,Ho:LuVO4 laser

NASA Astrophysics Data System (ADS)

Wang, Wei; Yang, Xining; Shen, Yingjie; Li, Linjun; Zhou, Long; Yang, Yuqiang; Bai, Yunfeng; Xie, Wenqiang; Ye, Guangchao; Yu, Xiaoyang

2018-05-01

A diode-end-pumped 2.05-µm Q-switched Tm,Ho:LuVO4 laser is reported in this paper. The cryogenic Tm3+ (5.0 at.%),Ho3+ (0.5 at.%):LuVO4 crystal was pumped by an 800-nm laser diode. At a pulse repetition frequency of 10 kHz, the maximum average output power of 3.77 W was achieved at 77 K when an incident pump power of 14.7 W was used. The slope efficiency and optical-optical conversion efficiency were 28.3 and 25.6%, respectively. The maximum per pulse energy was 2.54 mJ for a pulse duration of 69.9 ns. The beam quality factor Mx 2 was approximately 1.17 and My 2 was approximately 1.01 for the Tm,Ho:LuVO4 laser.

Influence of culture medium composition on relative mRNA abundances in domestic cat embryos.

PubMed

Hribal, R; Jewgenow, K; Braun, B C; Comizzoli, P

2013-04-01

Different culture conditions have been used to produce domestic cat embryos. As part of the in vitro procedures, the medium composition significantly affects the quality of the embryo development also. Quality assessments based on cleavage kinetics and blastomere symmetry are useful, but embryos also can differ in their relative gene expression patterns despite similar morphological characteristics. The aim of this study was to compare cat embryos produced with two different in vitro culture systems routinely used in two different laboratories [Smithsonian Conservation Biology Institute, Washington D.C., USA (SCBI) and Leibniz Institute for Zoo and Wildlife Research, Berlin, Germany (IZW)]. Specifically, relative mRNA expression patterns of critical genes for pre-implantation embryo development were assessed in both conditions. Embryos were produced in parallel in both culture systems by IVF using frozen-thawed ejaculated semen in the United States and fresh epididymal sperm in Germany. Success of embryo development in vitro was recorded as well as relative mRNA abundances [DNA methyltransferases 1 and 3A (DNMT1, DNMT3A), gap junction protein alpha 1 (GJA1), octamer-binding transcription factor 4 [OCT4], insulin-like growth factors 1 and 2 receptors (IGF1R, IGF2R), beta-actin (ACTB)] in pools of days 4-5 morulae by semi-quantitative RT-PCR assay. Percentages of cleaved embryos were similar (p > 0.05) between both culture systems, regardless of the location. OCT4 mRNA abundance was higher (p < 0.05) in embryos derived in the SCBI culture system compared with those from the IZW system when epididymal sperm was used for IVF. No clear correlation between the expression pattern and the culture system could be found for all other genes. It is suggested that OCT4 expression might be affected by the media composition in some conditions and can be the indicator of a better embryo quality. © 2012 Blackwell Verlag GmbH.

Optoelectronic properties and Seebeck coefficient in SnSe thin films

NASA Astrophysics Data System (ADS)

Urmila, K. S.; Namitha, T. A.; Rajani, J.; Philip, R. R.; Pradeep, B.

2016-09-01

SnSe thin films of thickness 180 nm have been deposited on glass substrates by reactive evaporation at an optimized substrate temperature of 523 ± 5 K and pressure of 10-5 mbar. The as-prepared SnSe thin films are characterized for their structural, optical and electrical properties by various experimental techniques. The p-type conductivity, near-optimum direct band gap, high absorption coefficient and good photosensitivity of the SnSe thin film indicate its suitability for photovoltaic applications. The optical constants, loss factor, quality factor and optical conductivity of the films are evaluated. The results of Hall and thermoelectric power measurements are correlated to determine the density of states, Fermi energy and effective mass of carriers and are obtained as 2.8 × 1017 cm-3, 0.03 eV and 0.05m 0 respectively. The high Seebeck coefficient ≈ 7863 μV/K, reasonably good power factor ≈ 7.2 × 10-4 W/(m·K2) and thermoelectric figure of merit ≈ 1.2 observed at 42 K suggests that, on further work, the prepared SnSe thin films can also be considered as a possible candidate for cryogenic thermoelectric applications.

A web-based survey of erection hardness score and its relationship to aging, sexual behavior, confidence, and risk factors in Japan.

PubMed

Kimura, Masaki; Shimura, Satoru; Tai, Toshihiro; Kobayashi, Hideyuki; Baba, Shiro; Kano, Munehide; Nagao, Koichi

2013-12-01

Erection hardness is an elemental component of men's sexual quality of life that can be easily measured by the Erection Hardness Score (EHS). However, there are few published data regarding EHS, and there is little understanding of its relationships to aging, men's sexual behavior, sexual confidence, and risk factors in Japan. To assess EHS and how it correlates to aging, sexual behaviors, sexual self-confidence, and risk factors in a Japanese population database. A web-based cross-sectional nationwide survey conducted between March and May 2009 in Japan. EHS, lifestyle factors, comorbidities, general health, sexual confidence, frequency of sexual behaviors, and attitudes toward treatment of erectile dysfunction (ED). A total of 7,710 men with a mean age of 39.3 ± 13.0 years participated in this survey. In 6,528 participants who were not using phosphodiesterase type 5 inhibitors, 3,540 (54.2%) had EHS ≤ 3 and 1,196 (18.3%) had EHS ≤ 2. We found a significant age-dependent decrease in EHS, sexual confidence, and frequency of sexual activities. Sexual confidence was strongly associated with higher EHS but was also associated with older age groups, presence of offspring, awareness of better general health, and greater frequency of sexual activity. In age-adjusted multivariate logistic regression, risk factors for a lower EHS (defined as EHS ≤ 2) were heavy smoking, which was defined as more than two packs per day (odds ratio [OR], 1.7) or a history of metabolic syndrome (OR, 1.4), hypertension (OR, 1.2), and diabetes mellitus (OR, 1.4). EHS correlates to various elements, such as aging, sexual behaviors, sexual confidence, and ED-related risk factors, and can be a valuable tool in clinical practice for monitoring and treating ED and thereby improving the quality of life for men and their sexual partners. Kimura M, Shimura S, Tai T, Kobayashi H, Baba S, Kano M, and Nagao K. A web-based survey of Erection Hardness Score and its relationship to aging, sexual behavior, confidence, and risk factors in Japan. Sex Med 2013;1:76-86.

Prevalence and Risk Factors of Chronic Constipation Among Women Aged 50 Years and Older in Shanghai, China

PubMed Central

Huang, Ling; Jiang, Huihong; Zhu, Maoling; Wang, Baocai; Tong, Minsi; Li, Huaguang; Lin, Mou-bin; Li, Li

2017-01-01

Background Chronic constipation (CC) is a major public health problem worldwide, especially in elderly women. This study aimed to investigate the prevalence and risk factors of CC among women aged 50 years and older in Shanghai, China. Material/Method A cross-sectional survey was conducted on 1950 women aged 50 years and older, randomly sampled in Yangpu District of Shanghai from April to October 2015. Information on demographic characteristics, lifestyle habits, medical history, and defecation situation was collected through in-person interviews. CC was defined according to Rome III criteria. The data were analyzed by chi-square test and multiple logistic regression analysis. Results The response rate to the survey was 80.4%. Of the 1568 participants, 77 were diagnosed with CC, with a prevalence of 4.9%. Moreover, the prevalence increased with advancing age. Multiple logistic analyses showed that body mass index (BMI) ≥25.0 kg/m2, non-manual occupation, premenopausal period, no delivery history, poor sleep quality, meat-based diet, and less physical exercise were significant risk factors for CC in the population of women aged 50 years and older. Conclusions CC was a common health problem among women aged 50 years and older in Shanghai, and the prevalence was positively associated with BMI ≥25.0 kg/m2, non-manual occupation, premenopausal period, no delivery history, poor sleep quality, meat-based diet, and less physical exercise. Further studies are needed to identify the risk factors and potential interventions for CC. PMID:28562581

Porous silicon ring resonator for compact, high sensitivity biosensing applications

DOE PAGES

Rodriguez, Gilberto A.; Hu, Shuren; Weiss, Sharon M.

2015-01-01

A ring resonator is patterned on a porous silicon slab waveguide to produce a compact, high quality factor biosensor with a large internal surface area available for enhanced recognition of biological and chemical molecules. The porous nature of the ring resonator allows molecules to directly interact with the guided mode. Quality factors near 10,000 were measured for porous silicon ring resonators with a radius of 25 μm. A bulk detection sensitivity of 380 nm/RIU was measured upon exposure to salt water solutions. Specific detection of nucleic acid molecules was demonstrated with a surface detection sensitivity of 4 pm/nM.

High power, widely tunable dual-wavelength 2 μm laser based on intracavity KTP optical parametric oscillator

NASA Astrophysics Data System (ADS)

Yan, Dexian; Wang, Yuye; Xu, Degang; Shi, Wei; Zhong, Kai; Liu, Pengxiang; Yan, Chao; Mei, Jialin; Shi, Jia; Yao, Jianquan

2017-01-01

We presented a high power, widely tunable narrowband 2 μm dual-wavelength source employing intracavity optical parametric oscillator with potassium titanium oxide phosphate (KTP) crystal. Two identical KTP crystals were oriented oppositely in the OPO cavity to compensate the walk-off effect. The output average power of dual-wavelength 2 μm laser was up to 18.18 W at 10 kHz with the peak power of 165 kW. The two wavelengths can be tuned in the range of 2070.7 nm to 2191.1 nm for ordinary light while in the range of 2190.7 nm to 2065.9 nm for extraordinary light with the full width at half maximum (FWHM) about 0.8 nm. The pulse width of the tunable laser was as narrow as 11 ns. The beam quality factor M 2 was less than 4 during wavelength tuning.

[Factors associated with poor sleep quality in the Brazilian population ≥ 40 years of age: VIGICARDIO Study].

PubMed

Muñoz-Pareja, Maritza; Loch, Mathias Roberto; Dos Santos, Hellen Geremias; Sakay Bortoletto, Maira Sayuri; Durán González, Alberto; Maffei de Andrade, Selma

The prevalence of poor sleep quality in men and women ≥ 40 years old from the VIGICARDIO Study was determined, and sociodemographic, health, lifestyle and social capital factors associated with poor sleep quality were identified. A population-based study conducted in 2011 among 1,058 non-institutionalised individuals randomly selected from Cambé, Paraná State, Brazil. Logistic regression was used to evaluate the association between sleep quality and sociodemographic, health, lifestyle and social capital factors in men and women. The prevalence of poor sleep quality was 34% in men and 44% in women. Having bad/regular self-rated health status was a factor associated with poor sleep quality in men (OR: 1.79; 95% CI: 1.17-2.72) and women (OR: 2.43; 95% CI: 1.68-3.53). Being obese (OR: 1.67; 95% CI: 1.13-2.46), having depression (OR: 2.09; 95% CI: 1.41-3.13) and presenting temporal orientation difficulties (OR: 1.95; 95% CI: 1.08-3.52) were associated factors in women. Difficulty to understand what is explained (OR: 2.18; 95% CI: 1.16-4.09) and alcohol abuse (OR: 1.85; 95% CI: 1.21-2.83) were associated factors in men. Factors affecting sleep quality are different for men and for women. These factors should be taken into consideration when devising activities that promote good sleep quality, with a view to improving their effectiveness. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Dynamic Resource Allocation and Access Class Barring Scheme for Delay-Sensitive Devices in Machine to Machine (M2M) Communications.

PubMed

Li, Ning; Cao, Chao; Wang, Cong

2017-06-15

Supporting simultaneous access of machine-type devices is a critical challenge in machine-to-machine (M2M) communications. In this paper, we propose an optimal scheme to dynamically adjust the Access Class Barring (ACB) factor and the number of random access channel (RACH) resources for clustered machine-to-machine (M2M) communications, in which Delay-Sensitive (DS) devices coexist with Delay-Tolerant (DT) ones. In M2M communications, since delay-sensitive devices share random access resources with delay-tolerant devices, reducing the resources consumed by delay-sensitive devices means that there will be more resources available to delay-tolerant ones. Our goal is to optimize the random access scheme, which can not only satisfy the requirements of delay-sensitive devices, but also take the communication quality of delay-tolerant ones into consideration. We discuss this problem from the perspective of delay-sensitive services by adjusting the resource allocation and ACB scheme for these devices dynamically. Simulation results show that our proposed scheme realizes good performance in satisfying the delay-sensitive services as well as increasing the utilization rate of the random access resources allocated to them.

Evaluating the Impacts of Transboundary Air pollution from China on Air Quality in the U.S. Using a Regression Framework

NASA Astrophysics Data System (ADS)

Ngo, N. S.; Bao, X.; Zhong, N.

2014-12-01

China is the largest emitter of anthropogenic air pollution in the world and previous work has shown the environmental impacts of the long-range transport (LRT) of air pollution from China to the U.S. via chemical transport models, in situ observations, isentropic back trajectories, and to a lesser extent statistical models. However, these studies generally focus on a narrow time period due to data constraints. In this study, we build upon the literature using econometric techniques to isolate the impacts on U.S. air quality from the LRT of air pollution from China. We use a unique daily data set of China's air pollution index (API) and PM10 concentrations at the city level and merge these information with daily monitor data in California (CA) between 2000 and 2013. We first employ a distributed lag model to examine daily patterns, and then exploit a "natural experiment." In the latter methodology, since air pollution is rarely randomly assigned, we examine the impacts of specific events that affect air quality in China, but are plausibly uncorrelated to factors affecting air pollution in CA. For example, Chinese New Year (CNY) is a major week-long holiday and we show pollution levels in China decrease during this time period, likely from reductions in industrial production. CNY varies each calendar year since it is based off the lunar new year, so the timing of this pollution reduction could be considered "as good as random" or exogenous to factors affecting air quality in CA. Using a regression framework including weather, seasonal and geographic controls, we can potentially isolate the impact of the LRT of air pollution to CA. First, results from the distributed lag model suggest that in the Spring, when LRT peaks, a 1 μg/m3 increase in daily PM10 from China between 10 and 14 days ago is associated with an increase in today's PM2.5 in CA of 0.022 μg/m3 (mean daily PM2.5 in CA is 12 μg/m3). Second, we find that if CNY occurred 5 to 9 days ago, today's PM2.5 in CA decreases by 3 μg/m3. We also conduct other tests and sensitivity checks, like observing impacts from individual cities in China or other events, and using daily leads as a falsification test. Our results have important policy implications regarding the consequences of foreign pollution sources and suggest a causal relationship between pollution from China and air quality in CA.

Evaluating the beam quality of double-cladding fiber lasers in applications.

PubMed

Yan, Ping; Wang, Xuejiao; Gong, Mali; Xiao, Qirong

2016-08-10

We put forward a new β_FL factor, which is used exclusively in fiber lasers and is suitable to assess beam quality and choose the LP₀₁ mode as the new suitable ideal beam. We present a new simple measurement method and verify the reasonability of the β_FL factor in experiment in a 20/400 μm fiber laser. Furthermore, we use the β_FL factor to evaluate the beam quality of a 3-kW-level fiber laser. It can be concluded that β_FL is a key factor not only for assessing the performance of the high-power fiber laser that is our main focus, but also for the simple measurement.

Design of thin InGaAsN(Sb) n-i-p junctions for use in four-junction concentrating photovoltaic devices

NASA Astrophysics Data System (ADS)

Wilkins, Matthew M.; Gupta, James; Jaouad, Abdelatif; Bouzazi, Boussairi; Fafard, Simon; Boucherif, Abderraouf; Valdivia, Christopher E.; Arès, Richard; Aimez, Vincent; Schriemer, Henry P.; Hinzer, Karin

2017-04-01

Four-junction solar cells for space and terrestrial applications require a junction with a band gap of ˜1 eV for optimal performance. InGaAsN or InGaAsN(Sb) dilute nitride junctions have been demonstrated for this purpose, but in achieving the 14 mA/cm2 short-circuit current needed to match typical GaInP and GaAs junctions, the open-circuit voltage (VOC) and fill factor of these junctions are compromised. In multijunction devices incorporating materials with short diffusion lengths, we study the use of thin junctions to minimize sensitivity to varying material quality and ensure adequate transmission into lower junctions. An n-i-p device with 0.65-μm absorber thickness has sufficient short-circuit current, however, it relies less heavily on field-aided collection than a device with a 1-μm absorber. Our standard cell fabrication process, which includes a rapid thermal anneal of the contacts, yields a significant improvement in diffusion length and device performance. By optimizing a four-junction cell around a smaller 1-sun short-circuit current of 12.5 mA/cm2, we produced an InGaAsN(Sb) junction with open-circuit voltage of 0.44 V at 1000 suns (1 sun=100 mW/cm2), diode ideality factor of 1.4, and sufficient light transmission to allow >12.5 mA/cm2 in all four subcells.

Leaf and root litter decomposition is discontinued at high altitude tropical montane rainforests contributing to carbon sequestration.

PubMed

Marian, Franca; Sandmann, Dorothee; Krashevska, Valentyna; Maraun, Mark; Scheu, Stefan

2017-08-01

We investigated how altitude affects the decomposition of leaf and root litter in the Andean tropical montane rainforest of southern Ecuador, that is, through changes in the litter quality between altitudes or other site-specific differences in microenvironmental conditions. Leaf litter from three abundant tree species and roots of different diameter from sites at 1,000, 2,000, and 3,000 m were placed in litterbags and incubated for 6, 12, 24, 36, and 48 months. Environmental conditions at the three altitudes and the sampling time were the main factors driving litter decomposition, while origin, and therefore quality of the litter, was of minor importance. At 2,000 and 3,000 m decomposition of litter declined for 12 months reaching a limit value of ~50% of initial and not decomposing further for about 24 months. After 36 months, decomposition commenced at low rates resulting in an average of 37.9% and 44.4% of initial remaining after 48 months. In contrast, at 1,000 m decomposition continued for 48 months until only 10.9% of the initial litter mass remained. Changes in decomposition rates were paralleled by changes in microorganisms with microbial biomass decreasing after 24 months at 2,000 and 3,000 m, while varying little at 1,000 m. The results show that, irrespective of litter origin (1,000, 2,000, 3,000 m) and type (leaves, roots), unfavorable microenvironmental conditions at high altitudes inhibit decomposition processes resulting in the sequestration of carbon in thick organic layers.

Protective effect of crocetin on bovine spermatozoa against oxidative stress during in vitro fertilization.

PubMed

Sapanidou, V; Taitzoglou, I; Tsakmakidis, I; Kourtzelis, I; Fletouris, D; Theodoridis, A; Lavrentiadou, S; Tsantarliotou, M

2016-11-01

Oxidative stress is one of the major factors that contribute to poor semen quality and low rates of in vitro fertilization. Crocetin, a main constituent of saffron (Crocus sativus L.) possesses potent antioxidant activity, by scavenging reactive oxygen species (ROS) and/or enhancing the activity of intracellular antioxidant enzymes. The aim of this study was to investigate, for the first time, the effect of crocetin on the quality characteristics of bull spermatozoa and fertilization rate. For this reason, frozen/thawed bovine spermatozoa were incubated with crocetin (1, 2.5, and 5 μm), for 120 or 240 min, in the presence of a negative control, and evaluated in terms of motility, viability, acrosomal status, DNA fragmentation index, intracellular ROS, and lipid peroxidation. In order to evaluate the impact of crocetin on cleavage and blastocyst rate, the compound was added in the IVF medium at the previously identified optimal concentration (2.5 μm). The results indicate that incubation of spermatozoa with 2.5 μm of crocetin resulted in a statistically significant lower production of superoxide anion and hydrogen peroxide, lower lipid peroxidation, and in better maintenance of motility parameters, viability, and acrosomal integrity, with a very small number of cells with DNA fragmentation, compared to the other groups (p < 0.05). The presence of crocetin (2.5 μm) in the fertilization medium also resulted in a significant increase in acrosome-reacted spermatozoa and blastocyst production, compared to the control group (p < 0.01). These data indicate that crocetin (2.5 μm) positively affects bovine sperm quality characteristics during a 240-min incubation and improves its fertilizing ability, directly and/or indirectly, by regulating ROS concentration and lipid peroxidation. © 2016 American Society of Andrology and European Academy of Andrology.

Millimeter-Wave Voltage-Controlled Oscillators in 0.13-micrometer CMOS Technology

DTIC Science & Technology

2006-06-01

controlled oscillators. Varactor , transistor, and in- ductor designs are optimized to reduce the parasitic capacitances. An investigation of tradeoff between...quality factor and tuning range for MOS varactors at 24 GHz has shown that the polysilicon gate lengths between 0.18 and 0.24 m result both good...millimeter wave, MOS varactor , quality factor, transmission line, voltage-controlled oscillator (VCO). I. INTRODUCTION WITH THE RAPID advance of high

650-nJ pulses from a cavity-dumped Yb:fiber-pumped ultrafast optical parametric oscillator

NASA Astrophysics Data System (ADS)

Lamour, Tobias P.; Reid, Derryck T.

2011-08-01

Sub-250-fs pulses with energies of up to 650 nJ and peak powers up to 2.07 MW were generated from a cavity-dumped optical parametric oscillator, synchronously-pumped at 15.3 MHz with sub-400-fs pulses from an Yb:fiber laser. The average beam quality factor of the dumped output was M2 ~1.2 and the total relative-intensity noise was 8 mdBc, making the system a promising candidate for ultrafast laser inscription of infrared materials.

Use of mTOR inhibitors in the treatment of breast cancer: an evaluation of factors that influence patient outcomes

PubMed Central

Jerusalem, Guy; Rorive, Andree; Collignon, Joelle

2014-01-01

Many systemic treatment options are available for advanced breast cancer, including endocrine therapy, chemotherapy, anti-human epidermal growth factor receptor 2 (HER2) therapy, and other targeted agents. Recently, everolimus, a mammalian target of rapamycin (mTOR) inhibitor, combined with exemestane, an aromatase inhibitor, has been approved in Europe and the USA for patients suffering from estrogen receptor-positive, HER2-negative advanced breast cancer previously treated by a nonsteroidal aromatase inhibitor, based on the results of BOLERO-2 (Breast cancer trials of OraL EveROlimus). This study showed a statistically significant and clinically meaningful improvement in median progression-free survival. Results concerning the impact on overall survival are expected in the near future. This clinically oriented review focuses on the use of mTOR inhibitors in breast cancer. Results reported with first-generation mTOR inhibitors (ridaforolimus, temsirolimus, everolimus) are discussed. The current and potential role of mTOR inhibitors is reported according to breast cancer subtype (estrogen receptor-positive HER2-negative, triple-negative, and HER2-positive ER-positive/negative disease). Everolimus is currently being evaluated in the adjuvant setting in high-risk estrogen receptor-positive, HER2-negative early breast cancer. Continuing mTOR inhibition or alternatively administering other drugs targeting the phosphatidylinositol-3-kinase/protein kinase B-mTOR pathway after progression on treatments including an mTOR inhibitor is under evaluation. Potential biomarkers to select patients showing a more pronounced benefit are reviewed, but we are not currently using these biomarkers in routine practice. Subgroup analysis of BOLERO 2 has shown that the benefit is consistent in all subgroups and that it is impossible to select patients not benefiting from addition of everolimus to exemestane. Side effects and impact on quality of life are other important issues discussed in this review. Second-generation mTOR inhibitors and dual mTOR-phosphatidylinositol-3-kinase inhibitors are currently being evaluated in clinical trials. PMID:24833916

Unprecedented quality factors at accelerating gradients up to 45 MVm -1 in niobium superconducting resonators via low temperature nitrogen infusion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grassellino, A.; Romanenko, A.; Trenikhina, Y.

We report the finding of new surface treatments that permit to manipulate the niobium resonator nitrogen content in the first few nanometers in a controlled way, and the resonator fundamental Mattis-Bardeen surface resistance and residual resistance accordingly. In particular, we find surface infusion conditions that systematically a) increase the quality factor of these 1.3 GHz superconducting radio frequency (SRF) bulk niobium resonators, up to very high gradients; b) increase the achievable accelerating gradient of the cavity compared to its own baseline with state-of-the-art surface processing. Cavities subject to the new surface process have larger than two times the state ofmore » the art Q at 2K for accelerating fields > 35 MV/m. Moreover, very high accelerating gradients ~ 45 MV/m are repeatedly reached, which correspond to peak magnetic surface fields of 190 mT, among the highest measured for bulk niobium cavities. These findings open the opportunity to tailor the surface impurity content distribution to maximize performance in Q and gradients, and have therefore very important implications on future performance and cost of SRF based accelerators. They also help deepen the understanding of the physics of the RF niobium cavity surface.« less

High pumping-power fiber combiner for double-cladding fiber lasers and amplifiers

NASA Astrophysics Data System (ADS)

Zheng, Jinkun; Zhao, Wei; Zhao, Baoyin; Li, Zhe; Chang, Chang; Li, Gang; Gao, Qi; Ju, Pei; Gao, Wei; She, Shengfei; Wu, Peng; Hou, Chaoqi; Li, Weinan

2018-03-01

A high pumping-power fiber combiner for backward pumping configurations is fabricated and demonstrated by manufacturing process refinement. The pump power handling capability of every pump fiber can extend to 600 W, corresponding to the average pump coupling efficiency of 94.83%. Totally, 2.67-kW output power with the beam quality factor M2 of 1.41 was obtained, using this combiner in the fiber amplifier experimental setup. In addition, the temperature of the splicing region was less than 50.0°C in the designed combiner under the action of circulating cooling water. The experimental results prove that the designed combiner is a promising integrated all-fiber device for multikilowatt continuous-wave fiber laser with excellent beam quality.

Effect of stocking density on water quality and (Growth, Body Composition and Plasma Cortisol Content) performance of pen-reared rainbow trout ( Oncorhynchus mykiss)

NASA Astrophysics Data System (ADS)

Liu, Qun; Hou, Zhishuai; Wen, Haishen; Li, Jifang; He, Feng; Wang, Jinhuan; Guan, Biao; Wang, Qinglong

2016-08-01

The goal of the study was to examine the effect of stocking density on the water quality of culture area, as well as the growth, body composition and cortisol content of rainbow trout ( Oncorhynchus mykiss). Pen-reared trout were stocked in densities of 40, 60, 80 fish individuals m-3 (4.6, 6.6, 8.6 kg m-3, SD1, SD2 and SD3 groups, respectively) for 300 days. Compared to the water from SD1 and SD2, that from SD3 exhibited significantly higher NH 4 + -N content and COD (chemical-oxygen-demand), and a significant reduction of dissolved oxygen in day 180 (40.6 kg m-3). Stocking density was significantly associated with body weight, standard length, VSI (viscerosomatic index), CF (condition factor) and FC (food coefficient) in group SD3, particularly in day 240 and day 300 (45 or 49.3 kg m-3). Increased crude fat and decreased crude protein were displayed in high density group when the density reached to 36 kg m-3. As a cumulative effect of density-related stress, VSI, CF, FC, moisture, and crude protein content varied over time in each density group (SD1, SD2, and SD3). In summary, trout exhibited a better growth performance in low density (26.3 kg m-3) than those reared in high densities (36 and 45 kg m-3). The results indicate that rainbow trout (114.44 g ± 6.21 g, 19.69 cm ± 0.31 cm) initially stocked in 6.6 or 8.6 kg m-3 should be lightened to less than 36 kg m-3 after an intensive rearing for 240 days.

Infrared light detection using a whispering-gallery-mode optical microcavity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, Jiangang, E-mail: jzhu@seas.wustl.edu, E-mail: ozdemir@seas.wustl.edu, E-mail: yang@seas.wustl.edu; Ozdemir, Sahin Kaya, E-mail: jzhu@seas.wustl.edu, E-mail: ozdemir@seas.wustl.edu, E-mail: yang@seas.wustl.edu; Yang, Lan, E-mail: jzhu@seas.wustl.edu, E-mail: ozdemir@seas.wustl.edu, E-mail: yang@seas.wustl.edu

2014-04-28

We demonstrate a thermal infrared (IR) detector based on an ultra-high-quality-factor (Q) whispering-gallery-mode (WGM) microtoroidal silica resonator and investigate its performance to detect IR radiation at 10 μm wavelength. The bandwidth and the sensitivity of the detector are dependent on the power of a probe laser and the detuning between the probe laser and the resonance frequency of the resonator. The microtoroid IR sensor achieved a noise-equivalent-power (NEP) of 7.46 nW, corresponding to an IR intensity of 0.095 mW/cm{sup 2}.

Poor sleep quality and later sleep timing are risk factors for osteopenia and sarcopenia in middle-aged men and women: The NEO study

PubMed Central

de Mutsert, Renée; le Cessie, Saskia; Appelman-Dijkstra, Natasha M.; Rosendaal, Frits R.; van Heemst, Diana; den Heijer, Martin; Biermasz, Nienke R.

2017-01-01

Context Sleep deprivation has detrimental metabolic consequences. Osteopenia and sarcopenia usually occur together and increase risk of fractures and disease. Results from studies linking sleep parameters to osteopenia or sarcopenia are scarce and inconsistent. Objective To examine the associations of sleep parameters with osteopenia and sarcopenia, considering the influence of sex and menopause. Design, setting and participants Cross-sectional analysis of 915 participants (45–65 years, 56% women, BMI 26 (range: 18–56) kg/m2) in the Netherlands Epidemiology of Obesity (NEO) study, a population-based cohort study. Sleep duration, quality, and timing were assessed with the Pittsburgh Sleep Quality Index (PSQI); bone mineral density and relative appendicular muscle mass were measured by DXA scans. Linear and logistic regressions were performed to associate sleep parameters to bone mineral density, relative appendicular muscle mass, osteopenia (t-score between -1 and -2.5) and sarcopenia (1 SD below average muscle mass). Results After adjustment for confounding factors, one unit increase in PSQI score (OR and 95% CI, 1.09, 1.03–1.14), declined self-rated sleep quality (1.76, 1.03–3.01), sleep latency (1.18, 1.06–1.31), and a one hour later sleep timing (1.51, 1.08–2.11), but not sleep duration (1.05, 0.90–1.23), were associated with osteopenia. PSQI score (1.10, 1.02–1.19) was also associated with sarcopenia; OR’s of sleep latency and later mid-sleep time with sarcopenia were 1.14 (0.99–1.31) and 1.54 (0.91–2.61), respectively. Associations were somewhat stronger in women and varied per menopausal status. Conclusions These results suggest that decreased sleep quality and a later sleep timing are risk factors for osteopenia and sarcopenia in middle aged individuals. PMID:28459884

Validation and Uncertainty Estimates for MODIS Collection 6 "Deep Blue" Aerosol Data

NASA Technical Reports Server (NTRS)

Sayer, A. M.; Hsu, N. C.; Bettenhausen, C.; Jeong, M.-J.

2013-01-01

The "Deep Blue" aerosol optical depth (AOD) retrieval algorithm was introduced in Collection 5 of the Moderate Resolution Imaging Spectroradiometer (MODIS) product suite, and complemented the existing "Dark Target" land and ocean algorithms by retrieving AOD over bright arid land surfaces, such as deserts. The forthcoming Collection 6 of MODIS products will include a "second generation" Deep Blue algorithm, expanding coverage to all cloud-free and snow-free land surfaces. The Deep Blue dataset will also provide an estimate of the absolute uncertainty on AOD at 550 nm for each retrieval. This study describes the validation of Deep Blue Collection 6 AOD at 550 nm (Tau(sub M)) from MODIS Aqua against Aerosol Robotic Network (AERONET) data from 60 sites to quantify these uncertainties. The highest quality (denoted quality assurance flag value 3) data are shown to have an absolute uncertainty of approximately (0.086+0.56Tau(sub M))/AMF, where AMF is the geometric air mass factor. For a typical AMF of 2.8, this is approximately 0.03+0.20Tau(sub M), comparable in quality to other satellite AOD datasets. Regional variability of retrieval performance and comparisons against Collection 5 results are also discussed.

Ginsenoside Rg3 improves cardiac mitochondrial population quality: Mimetic exercise training

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sun, Mengwei; Huang, Chenglin; Wang, Cheng

Highlights: •Rg3 is an ergogenic aid. •Rg3 improves mitochondrial antioxidant capacity. •Rg3 regulates mitochondria dynamic remodeling. •Rg3 alone matches some the benefits of aerobic exercise. -- Abstract: Emerging evidence indicates exercise training could mediate mitochondrial quality control through the improvement of mitochondrial dynamics. Ginsenoside Rg3 (Rg3), one of the active ingredients in Panax ginseng, is well known in herbal medicine as a tonic and restorative agent. However, the molecular mechanism underlying the beneficial effects of Rg3 has been elusive. In the present study, we compared the effects of Rg3 administration with aerobic exercise on mitochondrial adaptation in cardiac muscle tissuemore » of Sprague–Dawley (SD) rats. Three groups of SD rats were studied: (1) sedentary control, (2) Rg3-treated and (3) aerobic exercise trained. Both aerobic exercise training and Rg3 supplementation enhanced peroxisome proliferator-activated receptor coactivator 1 alpha (PGC-1α) and nuclear factor-E2-related factor 2 (Nrf2) protein levels in cardiac muscle. The activation of PGC-1α led to increased mRNA levels of mitochondrial transcription factor A (Tfam) and nuclear related factor 1(Nrf1), these changes were accompanied by increases in mitochondrial DNA copy number and complex protein levels, while activation of Nrf2 increased levels of phase II detoxifying enzymes, including nicotinamide adenine dinucleotide phosphate:quinone oxidoreductase 1(NQO1), superoxide dismutase (MnSOD) and catalase. Aerobic exercise also enhanced mitochondrial autophagy pathway activity, including increased conversion of LC3-I to LC3-II and greater expression of beclin1 and autophagy-related protein 7 (ATG7), these effects of aerobic exercise are comparable to that of Rg3. These results demonstrate that Rg3 mimics improved cardiac adaptations to exercise by regulating mitochondria dynamic remodeling and enhancing the quantity and quality of mitochondria.« less

Effects of high glucose and advanced glycation end products on the expressions of sclerostin and RANKL as well as apoptosis in osteocyte-like MLO-Y4-A2 cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tanaka, Ken-ichiro, E-mail: ken1nai@med.shimane-u.ac.jp; Yamaguchi, Toru, E-mail: yamaguch@med.shimane-u.ac.jp; Kanazawa, Ippei, E-mail: ippei.k@med.shimane-u.ac.jp

In diabetes mellitus (DM), high glucose (HG) and advanced glycation end products (AGEs) are involved in bone quality deterioration. Osteocytes produce sclerostin and receptor activator of nuclear factor-kB ligand (RANKL) and regulate osteoblast and osteoclast function. However, whether HG or AGEs directly affect osteocytes and regulate sclerostin and RANKL production is unknown. Here, we examined the effects of HG, AGE2, and AGE3 on the expression of sclerostin and RANKL and on apoptosis in osteocyte-like MLO-Y4-A2 cells. Treatment of the cells with 22 mM glucose, 100 μg/mL either AGE2 or AGE3 significantly increased the expression of sclerostin protein and mRNA; however, both AGEs,more » but not glucose, significantly decreased the expression of RANKL protein and mRNA. Moreover, treatment of the cells with HG, AGE2, or AGE3 for 72 h induced significant apoptosis. These detrimental effects of HG, AGE2, and AGE3 on sclerostin and RANKL expressions and on apoptosis were antagonized by pretreatment of the cells with 10{sup −8} M human parathyroid hormone (PTH)-(1–34). Thus, HG and AGEs likely suppress bone formation by increasing sclerostin expression in osteocytes, whereas AGEs suppress bone resorption by decreasing RANKL expression. Together, these processes may cause low bone turnover in DM. In addition, HG and AGEs may cause cortical bone deterioration by inducing osteocyte apoptosis. PTH may effectively treat these pathological processes and improve osteocyte function. - Highlights: • AGEs are involved in bone quality deterioration in diabetes mellitus (DM). • AGEs increased sclerostin as well as apoptosis, and decreased RANKL in osteocytes. • The effects of AGEs on osteocyte function were antagonized by human PTH-(1–34). • AGEs may cause low bone turnover and cortical porosity in DM. • PTH may be effective in bone quality deterioration by improving osteocyte function.« less

Comparison of obese adults with poor versus good sleep quality during a functional neuroimaging delay discounting task: A pilot study.

PubMed

Martin, Laura E; Pollack, Lauren; McCune, Ashley; Schulte, Erica; Savage, Cary R; Lundgren, Jennifer D

2015-10-30

This study aimed to determine if obese adults with poor versus good sleep quality demonstrate reduced self-regulatory capacity and different patterns of neural activation when making impulsive monetary choices. Six obese, good quality sleepers (M age=44.7 years, M BMI=38.1 kg/m(2)) were compared to 13 obese, poor quality sleepers (M age=42.6, M BMI=39.2 kg/m(2)) on sleep and eating behavior and brain activation in prefrontal and insular regions while engaging in a delay discounting task during functional magnetic resonance imaging (fMRI). Poor quality sleepers demonstrated significantly lower brain activation in the right inferior frontal gyrus, right middle frontal gyrus, and bilateral insula when making immediate and smaller (impulsive) monetary choices compared to the baseline condition. Behaviorally, poor compared to good quality sleepers reported higher scores in the night eating questionnaire. Obese adults with poor sleep quality demonstrate decreased brain activation in multiple regions that regulate cognitive control and interceptive awareness, possibly reducing self-regulatory capacity when making immediately gratifying decisions. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Analysis on the spatiotemporal characteristics of water quality and trophic states in Tiegang Reservoir: A public drinking water supply reservoir in South China

NASA Astrophysics Data System (ADS)

Song, Yun-long; Zhu, Jia; Li, Wang; Tao, Yi; Zhang, Jin-song

2017-08-01

Shenzhen is the most densely populated city in China and with a severe shortage of water. The per capita water resource is less than 200 m3, which is approximately 1/12 of the national average level. In 2016, nearly 90% of Shenzhen’s drinking water needed to be imported from the Pearl River. After arrived at Shenzhen, overseas water was firstly stockpiled in local reservoirs and then was supplied to nearby water works. Tiegang Reservoir is the largest drinking water supply reservoir and its water quality has played an important role to the city’s drinking water security. A fifteen-month’s field observation was conducted from April 2013 to June 2014 in Tiegang Reservoir, in order to analyze the temporal and spatial distribution of water quality factors and seasonal variation of trophic states. One-way ANOVA showed that significant difference was found in water quality factors on month (p<0.005). The spatial heterogeneity of water quality was obvious (p<0.05). The distribution pattern of WT, TOC, Silicate, NO3 --N, TN and Fe was pre-rainy period > latter rainy period > high temperature and rain free period > temperature jump period > winter drought period, while SD showed the contrary. Two-way ANOVA showed that months rather than locations were the key influencing factors of water quality factors succession. Tiegang reservoir was seriously polluted by TN, as a result WQI were at IV∼V level. If TN was not taken into account, WQI were atI∼III level. TLI (Σ) were about 35∼60, suggesting Tiegang reservoir was in mesotrophic and light-eutrophic trophic states. The WQI and TLI (Σ) in sampling sites 9 and 10 were poorer than that of other sites. The 14 water quality factors were divided into 5 groups by factor analysis (FA). The total interpretation rate was 73.54%. F1 represents the climatic change represented by water temperature. F2 and F4 represent the concentration of nutrients. F3 and F5 represent the sensory indexes of water body, such as turbidity, transparency. The FA results indicated that water quality potential risk factors was total nitrogen (TN), and potential risk factors also include chlorophyll-a and nitrate nitrogen (NO3 --N).

Potential Cardiovascular and Total Mortality Benefits of Air Pollution Control in Urban China.

PubMed

Huang, Chen; Moran, Andrew E; Coxson, Pamela G; Yang, Xueli; Liu, Fangchao; Cao, Jie; Chen, Kai; Wang, Miao; He, Jiang; Goldman, Lee; Zhao, Dong; Kinney, Patrick L; Gu, Dongfeng

2017-10-24

Outdoor air pollution ranks fourth among preventable causes of China's burden of disease. We hypothesized that the magnitude of health gains from air quality improvement in urban China could compare with achieving recommended blood pressure or smoking control goals. The Cardiovascular Disease Policy Model-China projected coronary heart disease, stroke, and all-cause deaths in urban Chinese adults 35 to 84 years of age from 2017 to 2030 if recent air quality (particulate matter with aerodynamic diameter ≤2.5 µm, PM 2.5 ) and traditional cardiovascular risk factor trends continue. We projected life-years gained if urban China were to reach 1 of 3 air quality goals: Beijing Olympic Games level (mean PM 2.5 , 55 μg/m 3 ), China Class II standard (35 μg/m 3 ), or World Health Organization standard (10 μg/m 3 ). We compared projected air pollution reduction control benefits with potential benefits of reaching World Health Organization hypertension and tobacco control goals. Mean PM 2.5 reduction to Beijing Olympic levels by 2030 would gain ≈241,000 (95% uncertainty interval, 189 000-293 000) life-years annually. Achieving either the China Class II or World Health Organization PM 2.5 standard would yield greater health benefits (992 000 [95% uncertainty interval, 790 000-1 180 000] or 1 827 000 [95% uncertainty interval, 1 481 00-2 129 000] annual life-years gained, respectively) than World Health Organization-recommended goals of 25% improvement in systolic hypertension control and 30% reduction in smoking combined (928 000 [95% uncertainty interval, 830 000-1 033 000] life-years). Air quality improvement in different scenarios could lead to graded health benefits ranging from 241 000 life-years gained to much greater benefits equal to or greater than the combined benefits of 25% improvement in systolic hypertension control and 30% smoking reduction. © 2017 American Heart Association, Inc.

Wideband nonlinear spectral broadening in ultra-short ultra - silicon rich nitride waveguides

PubMed Central

Choi, Ju Won; Chen, George F. R.; Ng, D. K. T.; Ooi, Kelvin J. A.; Tan, Dawn T. H.

2016-01-01

CMOS-compatible nonlinear optics platforms with high Kerr nonlinearity facilitate the generation of broadband spectra based on self-phase modulation. Our ultra – silicon rich nitride (USRN) platform is designed to have a large nonlinear refractive index and low nonlinear losses at 1.55 μm for the facilitation of wideband spectral broadening. We investigate the ultrafast spectral characteristics of USRN waveguides with 1-mm-length, which have high nonlinear parameters (γ ∼ 550 W−1/m) and anomalous dispersion at 1.55 μm wavelength of input light. USRN add-drop ring resonators broaden output spectra by a factor of 2 compared with the bandwidth of input fs laser with the highest quality factors of 11000 and 15000. Two – fold self phase modulation induced spectral broadening is observed using waveguides only 430 μm in length, whereas a quadrupling of the output bandwidth is observed with USRN waveguides with a 1-mm-length. A broadening factor of around 3 per 1 mm length is achieved in the USRN waveguides, a value which is comparatively larger than many other CMOS-compatible platforms. PMID:27272558

Development of kit formulations for (99m) TcN-MPO: a cationic radiotracer for myocardial perfusion imaging.

PubMed

Zheng, Yumin; Ji, Shundong; Tomaselli, Elena; Liu, Shuang

2014-07-01

The objective of this study was to develop a kit formulation for [(99m) TcN(mpo)(PNP5)](+) (MPO = 2-mercaptopyridine oxide), ((99m) TcN-MPO) to support its clinical evaluations as a SPECT radiotracer. Radiolabeling studies were performed using three different formulations (two-vial formulation and single-vial formulations with/without SnCl2 ) to explore the factors influencing radiochemical purity (RCP) of (99m) TcN-MPO. We found that the most important factor affecting the RCP of (99m) TcN-MPO was the purity of PNP5. (99m) TcN-MPO was prepared >98% RCP (n = 20) using the two-vial formulation. For single-vial formulations with/without SnCl2 , β-cyclodextrin (β-CD) is particularly useful as a stabilizer for PNP5. The RCP of (99m) TcN-MPO was 95-98% using β-CD, but its RCP was only 90-93% with γ-cyclodextrin (γ-CD). It seems that PNP5 fits better into the inner cavity of β-CD, which forms more stable inclusion complex than γ-CD in the single-vial formulations. The results from biodistribution and imaging studies in Sprague-Dawley rats clearly demonstrated biological equivalence of three different formulations. Single photon-emission computed tomography data suggested that high quality images could be obtained at 0-30-min post-injection without significant interference from the liver radioactivity. Considering the ease for (99m) Tc-labeling and high RCP of (99m) TcN-MPO, the non-SnCl2 single-vial formulation is an attractive choice for future clinical studies. Copyright © 2014 John Wiley & Sons, Ltd.

Effect of material constants on power output in piezoelectric vibration-based generators.

PubMed

Takeda, Hiroaki; Mihara, Kensuke; Yoshimura, Tomohiro; Hoshina, Takuya; Tsurumi, Takaaki

2011-09-01

A possible power output estimation based on material constants in piezoelectric vibration-based generators is proposed. A modified equivalent circuit model of the generator was built and was validated by the measurement results in the generator fabricated using potassium sodium niobate-based and lead zirconate titanate (PZT) ceramics. Subsequently, generators with the same structure using other PZT-based and bismuth-layered structure ferroelectrics ceramics were fabricated and tested. The power outputs of these generators were expressed as a linear functions of the term composed of electromechanical coupling coefficients k(sys)(2) and mechanical quality factors Q*(m) of the generator. The relationship between device constants (k(sys)(2) and Q*(m)) and material constants (k(31)(2) and Q(m)) was clarified. Estimation of the power output using material constants is demonstrated and the appropriate piezoelectric material for the generator is suggested.

Near-self-imaging cavity for three-mode optoacoustic parametric amplifiers using silicon microresonators.

PubMed

Liu, Jian; Torres, F A; Ma, Yubo; Zhao, C; Ju, L; Blair, D G; Chao, S; Roch-Jeune, I; Flaminio, R; Michel, C; Liu, K-Y

2014-02-10

Three-mode optoacoustic parametric amplifiers (OAPAs), in which a pair of photon modes are strongly coupled to an acoustic mode, provide a general platform for investigating self-cooling, parametric instability and very sensitive transducers. Their realization requires an optical cavity with tunable transverse modes and a high quality-factor mirror resonator. This paper presents the design of a table-top OAPA based on a near-self-imaging cavity design, using a silicon torsional microresonator. The design achieves a tuning coefficient for the optical mode spacing of 2.46  MHz/mm. This allows tuning of the mode spacing between amplification and self-cooling regimes of the OAPA device. Based on demonstrated resonator parameters (frequencies ∼400  kHz and quality-factors ∼7.5×10(5) we predict that the OAPA can achieve parametric instability with 1.6 μW of input power and mode cooling by a factor of 1.9×10(4) with 30 mW of input power.

Impurity Content Optimization to Maximize Q-Factors of Superconducting Resonators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martinello, Martina; Checchin, Mattia; Grassellino, Anna

2017-05-01

Quality factor of superconducting radio-frequency (SRF) cavities is degraded whenever magnetic flux is trapped in the cavity walls during the cooldown. In this contribution we study how the trapped flux sensitivity, defined as the trapped flux surface resistance normalized for the amount of trapped flux, depends on the mean free path. A systematic study of a variety of 1.3 GHz cavities with different surface treatments (EP, 120 C bake and different N-doping) is carried out. A bell shaped trend appears for the range of mean free path studied. Over-doped cavities fall at the maximum of this curve defining the largestmore » values of sensitivity. In addition, we have studied the trend of the BCS surface resistance contribution as a function of mean free path, showing that N-doped cavities follow close to the theoretical minimum. Adding these results together we show that the 2/6 N-doping treatment gives the highest Q-factor values at 2 K and 16 MV/m, as long as the magnetic field fully trapped during the cavity cooldown is lower than 10 mG.« less

Assessment of water quality from water harvesting using small farm reservoir for irrigation

NASA Astrophysics Data System (ADS)

Dewi, W. S.; Komariah; Samsuri, I. Y.; Senge, M.

2018-03-01

This study aims to assess the quality of rainfall-runoff water harvesting using small farm reservoir (SFR) for irrigation. Water quality assessment criteria based on RI Government Regulation number 82 the year 2001 on Water Quality Management and Pollution Control, and FAO Irrigation Water Quality Guidelines 1985. The experiment was conducted in the dry land of Wonosari Village, Gondangrejo District, Karanganyar Regency. SFR size was 10 m x 3 m x 2 m. Water quality measurements are done every week, ten times. Water samples were taken at 6 points, namely: distance of 2.5 m, 5 m, and 7.5 m from the inlet, at depth 25 cm and 175 cm from surface water. In each sampling point replicated three times. Water quality parameters include dissolved oxygen (DO), Turbidity (TSS), water pH, Nitrate (NO3), and Phosphate. The results show that water harvesting that collected in SFR meets both standards quality used, so the water is feasible for agricultural irrigation. The average value of harvested water was DO 2.6 mg/l, TSS 62.7 mg/l, pH 6.6, P 5.3 mg/l and NO3 0.16 mg/l. Rainfall-runoff water harvesting using SFR prospectus for increasing save water availability for irrigation.

Excitation of hypersonic acoustic waves in diamond-based piezoelectric layered structure on the microwave frequencies up to 20GHz.

PubMed

Sorokin, B P; Kvashnin, G M; Novoselov, A S; Bormashov, V S; Golovanov, A V; Burkov, S I; Blank, V D

2017-07-01

First ultrahigh frequency (UHF) investigation of quality factor Q for the piezoelectric layered structure «Al/(001)AlN/Mo/(100) diamond» has been executed in a broad frequency band from 1 up to 20GHz. The record-breaking Q·f quality parameter up to 2.7·10 14 Hz has been obtained close to 20GHz. Frequency dependence of the form factor m correlated with quality factor has been analyzed by means of computer simulation, and non-monotonic frequency dependence can be explained by proper features of thin-film piezoelectric transducer (TFPT). Excluding the minimal Q magnitudes measured at the frequency points associated with minimal TFPT effectiveness, one can prove a rule of Qf∼f observed for diamond on the frequencies above 1GHz and defined by Landau-Rumer's acoustic attenuation mechanism. Synthetic IIa-type diamond single crystal as a substrate material for High-overtone Bulk Acoustic Resonator (HBAR) possesses some excellent acoustic properties in a wide microwave band and can be successfully applied for design of acoustoelectronic devices, especially the ones operating at a far UHF band. Copyright © 2017 Elsevier B.V. All rights reserved.

Mortality from respiratory infections and chronic obstructive pulmonary disease and associations with environmental quality.

EPA Science Inventory

Respiratory infections (RI) and chronic obstructive pulmonary disease (COPD) have been identified by the World Health Organization as conditions which may be strongly influenced by environmental factors. We examined the associations between environmental quality and U.S. county m...

Off-axis spectral beam combining of Bragg reflection waveguide photonic crystal diode lasers

NASA Astrophysics Data System (ADS)

Sun, Fangyuan; Wang, Lijie; Zhao, Yufei; Hou, Guanyu; Shu, Shili; Zhang, Jun; Peng, Hangyu; Tian, Sicong; Tong, Cunzhu; Wang, Lijun

2018-06-01

The spectral beam combining (SBC) of Bragg reflection waveguide photonic crystal (BRW-PC) diode lasers was studied for the first time. An off-axis feedback system was constructed using a stripe mirror and a spatial filter to control beam quality in the external cavity. It was found that the BRW-PC diode lasers with a low divergence and a circular beam provided a simplified and cost-effective SBC. The off-axis feedback broke the beam quality limit of a single element, and an M 2 factor of 3.8 times lower than that of a single emitter in the slow axis was demonstrated.

Adsorption of 99mTc-sestamibi onto plastic syringes: evaluation of factors affecting the degree of adsorption and their impact on clinical studies.

PubMed

Swanson, Tiffinee N; Troung, Duong T; Paulsen, Andrew; Hruska, Carrie B; O'Connor, Michael K

2013-12-01

The purpose of this study was to document the extent of adhesion of (99m)Tc-sestamibi to syringes in patient procedures, determine factors that influence the degree of adhesion, and evaluate alternatives to our current practice that would either result in a more reproducible degree of adhesion or, ideally, eliminate adhesion. The extent of adhesion was documented in 216 patient procedures and evaluated in detail in an additional 73 patient procedures. We evaluated the nature of the adhesion and its possible causes, including the location of adhesion in injection sets, the effect of syringe type, and the effect of prerinsing of syringes with various solutions of nonradiolabeled sestamibi and (99m)Tc-sestamibi. The extent of adhesion was reevaluated in 50 procedures performed using the syringe type that demonstrated the lowest adhesion rate. The degree of adhesion of (99m)Tc-sestamibi to the injection set was found to be 20.1% ± 8.0%, with a range (10th-90th percentiles) of 9%-31%. The primary cause of adhesion appeared to be the lubricant used inside the syringe barrel. Evaluation of 6 different syringe types identified a brand with a lower adhesion rate. Reevaluation in patient procedures using this brand showed a 5.2% ± 2.5% degree of adhesion, with a range (10th-90th percentiles) of 2.5%-7.7%. Selection of the appropriate type of syringe can significantly reduce the magnitude and variability of residual (99m)Tc-sestamibi activity. With more reproducible residual activities, we have been able to achieve an approximately 20% reduction in the dispensed dose of (99m)Tc-sestamibi used in clinical procedures and a more consistent injected dose with less interpatient variation. The frequent changes in syringe design by manufacturers require that a quality control program for monitoring of residual activity be incorporated into clinical practice. This program has allowed us to maintain image quality and achieve more consistent injected patient doses in clinical procedures that use (99m)Tc-sestamibi.

Improved Generation of Induced Cardiomyocytes Using a Polycistronic Construct Expressing Optimal Ratio of Gata4, Mef2c and Tbx5.

PubMed

Wang, Li; Liu, Ziqing; Yin, Chaoying; Zhou, Yang; Liu, Jiandong; Qian, Li

2015-11-13

Direct conversion of cardiac fibroblasts (CFs) into induced cardiomyocytes (iCMs) holds great potential for regenerative medicine by offering alternative strategies for treatment of heart disease. This conversion has been achieved by forced expression of defined factors such as Gata4 (G), Mef2c (M) and Tbx5 (T). Traditionally, iCMs are generated by a cocktail of viruses expressing these individual factors. However, reprogramming efficiency is relatively low and most of the in vitro G,M,T-transduced fibroblasts do not become fully reprogrammed, making it difficult to study the reprogramming mechanisms. We recently have shown that the stoichiometry of G,M,T is crucial for efficient iCM reprogramming. An optimal stoichiometry of G,M,T with relative high level of M and low levels of G and T achieved by using our polycistronic MGT vector (hereafter referred to as MGT) significantly increased reprogramming efficiency and improved iCM quality in vitro. Here we provide a detailed description of the methodology used to generate iCMs with MGT construct from cardiac fibroblasts. Isolation of cardiac fibroblasts, generation of virus for reprogramming and evaluation of the reprogramming process are also included to provide a platform for efficient and reproducible generation of iCMs.

Thermoelectric Power Factor Limit of a 1D Nanowire

NASA Astrophysics Data System (ADS)

Chen, I.-Ju; Burke, Adam; Svilans, Artis; Linke, Heiner; Thelander, Claes

2018-04-01

In the past decade, there has been significant interest in the potentially advantageous thermoelectric properties of one-dimensional (1D) nanowires, but it has been challenging to find high thermoelectric power factors based on 1D effects in practice. Here we point out that there is an upper limit to the thermoelectric power factor of nonballistic 1D nanowires, as a consequence of the recently established quantum bound of thermoelectric power output. We experimentally test this limit in quasiballistic InAs nanowires by extracting the maximum power factor of the first 1D subband through I -V characterization, finding that the measured maximum power factors conform to the theoretical limit. The established limit allows the prediction of the achievable power factor of a specific nanowire material system with 1D electronic transport based on the nanowire dimension and mean free path. The power factor of state-of-the-art semiconductor nanowires with small cross section and high crystal quality can be expected to be highly competitive (on the order of mW /m K2 ) at low temperatures. However, they have no clear advantage over bulk materials at, or above, room temperature.

Characterizing groundwater quality ranks for drinking purposes in Sylhet district, Bangladesh, using entropy method, spatial autocorrelation index, and geostatistics.

PubMed

Islam, Abu Reza Md Towfiqul; Ahmed, Nasir; Bodrud-Doza, Md; Chu, Ronghao

2017-12-01

Drinking water is susceptible to the poor quality of contaminated water affecting the health of humans. Thus, it is an essential study to investigate factors affecting groundwater quality and its suitability for drinking uses. In this paper, the entropy theory, multivariate statistics, spatial autocorrelation index, and geostatistics are applied to characterize groundwater quality and its spatial variability in the Sylhet district of Bangladesh. A total of 91samples have been collected from wells (e.g., shallow, intermediate, and deep tube wells at 15-300-m depth) from the study area. The results show that NO 3 - , then SO 4 2- , and As are the most contributed parameters influencing the groundwater quality according to the entropy theory. The principal component analysis (PCA) and correlation coefficient also confirm the results of the entropy theory. However, Na + has the highest spatial autocorrelation and the most entropy, thus affecting the groundwater quality. Based on the entropy-weighted water quality index (EWQI) and groundwater quality index (GWQI) classifications, it is observed that 60.45 and 53.86% of water samples are classified as having an excellent to good qualities, while the remaining samples vary from medium to extremely poor quality domains for drinking purposes. Furthermore, the EWQI classification provides the more reasonable results than GWQIs due to its simplicity, accuracy, and ignoring of artificial weight. A Gaussian semivariogram model has been chosen to the best fit model, and groundwater quality indices have a weak spatial dependence, suggesting that both geogenic and anthropogenic factors play a pivotal role in spatial heterogeneity of groundwater quality oscillations.

Systematic monitoring of male circumcision scale-up in Nyanza, Kenya: exploratory factor analysis of service quality instrument and performance ranking.

PubMed

Omondi Aduda, Dickens S; Ouma, Collins; Onyango, Rosebella; Onyango, Mathews; Bertrand, Jane

2014-01-01

Considerable conceptual and operational complexities related to service quality measurements and variability in delivery contexts of scaled-up medical male circumcision, pose real challenges to monitoring implementation of quality and safety. Clarifying latent factors of the quality instruments can enhance contextual applicability and the likelihood that observed service outcomes are appropriately assessed. To explore factors underlying SYMMACS service quality assessment tool (adopted from the WHO VMMC quality toolkit) and; determine service quality performance using composite quality index derived from the latent factors. Using a comparative process evaluation of Voluntary Medical Male Circumcision Scale-Up in Kenya site level data was collected among health facilities providing VMMC over two years. Systematic Monitoring of the Medical Male Circumcision Scale-Up quality instrument was used to assess availability of guidelines, supplies and equipment, infection control, and continuity of care services. Exploratory factor analysis was performed to clarify quality structure. Fifty four items and 246 responses were analyzed. Based on Eigenvalue >1.00 cut-off, factors 1, 2 & 3 were retained each respectively having eigenvalues of 5.78; 4.29; 2.99. These cumulatively accounted for 29.1% of the total variance (12.9%; 9.5%; 6.7%) with final communality estimates being 13.06. Using a cut-off factor loading value of ≥0.4, fifteen items loading on factor 1, five on factor 2 and one on factor 3 were retained. Factor 1 closely relates to preparedness to deliver safe male circumcisions while factor two depicts skilled task performance and compliance with protocols. Of the 28 facilities, 32% attained between 90th and 95th percentile (excellent); 45% between 50th and 75th percentiles (average) and 14.3% below 25th percentile (poor). the service quality assessment instrument may be simplified to have nearly 20 items that relate more closely to service outcomes. Ranking of facilities and circumcision procedure using a composite index based on these items indicates that majority performed above average.

Psychometric validation of a sexual quality of life questionnaire for use in men with premature ejaculation or erectile dysfunction.

PubMed

Abraham, Lucy; Symonds, Tara; Morris, Mark F

2008-03-01

An instrument that can systematically capture the impact of sexual dysfunction on quality of life (QoL) in men is needed. To psychometrically validate a sexual QoL instrument for men (SQOL-M) with premature ejaculation (PE) or erectile dysfunction (ED). The main assessment populations were men participating in clinical trials of treatments for PE or ED. Men with PE had a confirmed intravaginal ejaculatory latency time of < or = 2 minutes in > or = 70% of attempts. Men with ED had a score of > 21 on the International Index of Erectile Function (IIEF). Confirmatory psychometric testing was conducted in further groups of men with PE. The internal consistency, convergent and discriminant validity, test-retest reliability, and known-groups validity of the instrument were assessed. An 11-item version of the SQOL-M was produced following factor analyses on men with either PE or ED. Psychometric testing showed no overlap between items and good item-total correlations. Factor analysis confirmed a one-factor solution. Excellent internal consistency was demonstrated, with a Cronbach's alpha of > or = 0.82 in all groups. In men reporting no change in their symptoms, the SQOL-M showed excellent test-retest reliability: the intraclass correlation coefficient was 0.77 for men with PE, and 0.79 for men with ED. Convergent validity was also good. In men with PE, the SQOL-M correlated with the satisfaction and distress domains of the Index of Premature Ejaculation. In men with ED, the SQOL-M correlated with the overall satisfaction domain of the IIEF. The measure also demonstrated excellent discriminant validity between men with PE or ED and men with no sexual dysfunction (P < 0.0001). The SQOL-M instrument is a useful tool for evaluating sexual QoL in men with PE and ED.

Optimization of one-dimensional photonic crystals with double layer magneto-active defect

NASA Astrophysics Data System (ADS)

Mikhailova, T. V.; Berzhansky, V. N.; Shaposhnikov, A. N.; Karavainikov, A. V.; Prokopov, A. R.; Kharchenko, Yu. M.; Lukienko, I. M.; Miloslavskaya, O. V.; Kharchenko, M. F.

2018-04-01

Success of practical implementation of one-dimensional photonic crystals with magneto-active layers is evaluated in high values of magneto-optical (MO) quality factor Q and figure of merit F. The article relates to optimization of one-dimensional photonic crystals with double layer magneto-active (MA) defect of composition Bi1.0Y0.5Gd1.5Fe4.2Al0.8O12/Bi2.8Y0.2Fe5O12 located between the nongarnet dielectric Bragg mirrors. The structure design was performed by changing the number of layer pairs in Bragg mirrors m and the optical thickness of MA defect lM to achieve high values of MO characteristics. Theoretical predictions were confirmed by experimental investigation of eight synthesized configurations with m = 4 and m = 7. We have demonstrated the maximum Q = 15.1 deg and F = 7.5% at 624 nm for structure with m = 4 and lM = (2.5·λ0/2), where λ0 = 690 nm is the photonic band gap center. Configurations with m = 3 can also provide their effectiveness in realization. Maximum MO activity was achieved for configurations with m = 7. The structures with lM = (0.8·λ0/2) and lM = (2.5·λ0/2) showed respectively the specific Faraday rotation -113 deg/μm (that exceeds in 62 times the Faraday rotation of MA double layer film) at 654 nm and absolute Faraday rotation -20.6 deg at 626 nm.

On-orbit calibration of Visible Infrared Imaging Radiometer Suite reflective solar bands and its challenges using a solar diffuser.

PubMed

Sun, Junqiang; Wang, Menghua

2015-08-20

The reflective solar bands (RSBs) of the Visible Infrared Imaging Radiometer Suite (VIIRS) on board the Suomi National Polar-Orbiting Partnership satellite are calibrated by a solar diffuser (SD) panel whose performance is itself monitored by an accompanying solar diffuser stability monitor (SDSM). In this comprehensive work we describe the SD-based calibration algorithm of the RSBs, analyze the calibration data, and derive the performance results-the RSB calibration coefficients or F-factors-for the current three and a half years of mission. The application of the newly derived product of the SD bidirectional reflectance factor and the vignetting function for the SD screen and the newly derived SD degradation, so-called H-factors, effectively minimizes the artificial seasonal patterns in the RSB calibration coefficients due to the errors of these ingredient inputs. The full illumination region, the "sweet spot," during calibration events for SD view is carefully examined and selected to ensure high data quality and to reduce noise owing to non-fully illuminated samples. A time-dependent relative spectral response (RSR), coming from the large out-of-band contribution and the VIIRS optical system wavelength-dependent degradation, is derived from an iterative approach and applied in the SD calibration for each RSB. The result shows that VIIRS RSBs degrade much faster at near-infrared (NIR) and shortwave-infrared (SWIR) wavelength ranges due to the faster degradation of the rotating telescope assembly against the remaining part of the system. The gains of the VIIRS RSBs have degraded 2.0% (410 nm, Band M1), 0.2% (443 nm, Band M2), -0.3% (486 nm, Band M3), 0.2% (551 nm, Band M4), 6.2% (640 nm, Band I1), 11.0% (671 nm, Band M5), 21.3% (745 nm, Band M6), 35.8% (862 nm, Band I2), and 35.8% (862 nm, Band M7), respectively, since launch and 24.8% (1238 nm, Band M8), 18.5% (1378 nm, Band M9), 11.5% (1610 nm, Band I3), 11.5% (1610, Band M10), and 4.0% (2250 nm, Band M11), respectively, since 20 January 2012. It is established that the SD calibration accurately catches the on-orbit RSB degradation according to the instrument design and the calibration algorithm. However, due to the inherent nonuniform degradation of the SD affecting especially the short wavelength bands and the lack of capability of the SDSM calibration to catch degradation beyond 935 nm, the direct and the unmitigated application of the SD calibration result will introduce nonnegligible error into the calibration coefficients resulting in long-term drifts in the sensor data records and consequently the high-level products. We explicitly unveil the effect of the nonuniformity in SD degradation in the RSB calibration coefficients but also briefly discuss a critical yet simple mitigation to restore the accuracy of the calibration coefficients based on lunar observations. The methodology presented here thus remains intact as the cornerstone of the RSB calibration, and our derived RSB calibration coefficients represent the optimal result. This work has the most impact on the quality of the ocean color products that sensitively depend on the moderate visible and NIR bands (M1-M7), as well as the SWIR bands (M8, M10, and M11).

Physics and material science of ultra-high quality factor superconducting resonator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vostrikov, Alexander

2015-08-01

The nitrogen doping into niobium superconducting radio frequency cavity walls aiming to improve the fundamental mode quality factor is the subject of the research in the given work. Quantitative nitrogen diffusion into niobium model calculating the concentration profile was developed. The model estimations were confirmed with secondary ion mass spectrometry technique measurements. The model made controlled nitrogen doping recipe optimization possible. As a result the robust reproducible recipe for SRF cavity walls treatment with nitrogen doping was developed. The cavities produced with optimized recipe met LCLS–II requirements on quality factor of 2.7 ∙ 10 10 at acceleration field of 16more » MV/m. The microscopic effects of nitrogen doping on superconducting niobium properties were studied with low energy muon spin rotation technique and magnetometer measurements. No significant effect of nitrogen on the following features was found: electron mean free path, magnetic field penetration depth, and upper and surface critical magnetic fields. It was detected that for nitrogen doped niobium samples magnetic flux starts to penetrate inside the superconductor at lower external magnetic field value compared to the low temperature baked niobium ones. This explains lower quench field of SRF cavities treated with nitrogen. Quality factor improvement of fundamental mode forced to analyze the high order mode (HOM) impact on the particle beam dynamics. Both resonant and cumulative effects caused by monopole and dipole HOMs respectively are found to be negligible within the requirements for LCLS–II.« less

Low muscle attenuation is a prognostic factor for survival in metastatic breast cancer patients treated with first line palliative chemotherapy.

PubMed

Rier, Hánah N; Jager, Agnes; Sleijfer, Stefan; van Rosmalen, Joost; Kock, Marc C J M; Levin, Mark-David

2017-02-01

Low muscle mass (LMM) and low muscle attenuation (LMA) reflect low muscle quantity and low muscle quality, respectively. Both are associated with a poor outcome in several types of solid malignancies. This study determined the association of skeletal muscle measures with overall survival (OS) and time to next treatment (TNT). A skeletal muscle index (SMI) in cm 2 /m 2 and muscle attenuation (MA) in Hounsfield units (HU) were measured using abdominal CT-images of 166 patients before start of first-line chemotherapy for metastatic breast cancer. Low muscle mass (SMI <41 cm 2 /m 2 ), sarcopenic obesity (LMM and BMI ≥30 kg/m 2 ) and low muscle attenuation (MA <41 HU and BMI <25 kg/m2 or MA <33 HU and BMI ≥25 kg/m2) were related to OS and TNT. The prevalence of LMM, sarcopenic obesity and LMA were 66.9%, 7.2% and 59.6% respectively. LMM and sarcopenic obesity showed no significant association with OS and TNT, whereas LMA was associated with both lower OS (HR 2.04, 95% CI 1.34-3.12, p = 0.001) and shorter TNT (HR 1.72, 95% CI 1.14-2.62, p = 0.010). Patients with LMA had a median OS and TNT of 15 and 8 months respectively, compared to 23 and 10 months in patients with normal MA. LMA is a prognostic factor for OS and TNT in metastatic breast cancer patients receiving first-line palliative chemotherapy, whereas LMM and sarcopenic obesity are not. Further research is needed to establish what impact LMA should have in daily clinical practice. Copyright © 2016 Elsevier Ltd. All rights reserved.

Antitumor effect of nuclear factor-κB decoy transfer by mannose-modified bubble lipoplex into macrophages in mouse malignant ascites

PubMed Central

Kono, Yusuke; Kawakami, Shigeru; Higuchi, Yuriko; Maruyama, Kazuo; Yamashita, Fumiyoshi; Hashida, Mitsuru

2014-01-01

Patients with malignant ascites (MAs) display several symptoms, such as dyspnea, nausea, pain, and abdominal tenderness, resulting in a significant reduction in their quality of life. Tumor-associated macrophages (TAMs) play a crucial role in MA progression. Because TAMs have a tumor-promoting M2 phenotype, conversion of the M2 phenotypic function of TAMs would be promising for MA treatment. Nuclear factor-κB (NF-κB) is a master regulator of macrophage polarization. Here, we developed targeted transfer of a NF-κB decoy into TAMs by ultrasound (US)-responsive, mannose-modified liposome/NF-κB decoy complexes (Man-PEG bubble lipoplexes) in a mouse peritoneal dissemination model of Ehrlich ascites carcinoma. In addition, we investigated the effects of NF-κB decoy transfection into TAMs on MA progression and mouse survival rates. Intraperitoneal injection of Man-PEG bubble lipoplexes and US exposure transferred the NF-κB decoy into TAMs effectively. When the NF-κB decoy was delivered into TAMs by this method in the mouse peritoneal dissemination model, mRNA expression of the Th2 cytokine interleukin (IL)-10 in TAMs was decreased significantly. In contrast, mRNA levels of Th1 cytokines (IL-12, tumor necrosis factor-α, and IL-6) were increased significantly. Moreover, the expression level of vascular endothelial growth factor in ascites was suppressed significantly, and peritoneal angiogenesis showed a reduction. Furthermore, NF-κB decoy transfer into TAMs significantly decreased the ascitic volume and number of Ehrlich ascites carcinoma cells in ascites, and prolonged mouse survival. In conclusion, we transferred a NF-κB decoy efficiently by Man-PEG bubble lipoplexes with US exposure into TAMs, which may be a novel approach for MA treatment. PMID:24850474

Key Factors Determining Indoor Air PM10 Concentrations in Naturally Ventilated Primary Schools in Belgrade, Serbia

PubMed Central

Matic, Branislava; Rakic, Uros; Jovanovic, Verica; Dejanovic, Snezana; Djonovic, Nela

2017-01-01

Abstract Introduction Indoor air quality (IAQ) is rated as a serious public health issue. Knowing children are accounted as more vulnerable to environmental health hazards, data are needed on air quality in schools. Methods A project was conducted from 2007 until 2009 (SEARCH, School Environment and Respiratory Health of Children), aiming to verify links between IAQ and children’s respiratory health. Study was conducted in ten primary schools on 735 children, in 44 classrooms. Children were randomly selected. Research tools and indicators used for children’s exposure to school environment were indoor and outdoor pollutants, two standardized questionnaires for school and classroom characteristics. In both classroom air and ambient air in front of them we measured, during a 5-day exposure period for continuous 24h measuring: carbon monoxide, carbon dioxide, indoor air temperature, relative humidity, and PM10 during classes. Results PM10 concentrations were significantly most frequent in an interval of ≥80.1μg/m3, that is, in the interval above 50μg/m3. Mean PM10 value was 82.24±42.43 μg/m3, ranging from 32.00μg/m3 to of 197.00μg/m3. Conclusion The increase of outdoor PM10 concentration significantly affects the increase of indoor PM10. A statistically significant difference exists for average IAQ PM10 concentrations vs. indicators of indoor thermal comfort zone (p<0.0001); they are lower in the classrooms with indicators within the comfort zone. Moreover, dominant factors for the increase of PM10 are: high occupancy rate in the classroom (<2m2 of space per child), high relative humidity (>75%), and indoor temperature beyond 23°C, as well as bad ventilation habits (keeping windows shut most of the time). PMID:29062397

Effect of the Agricultural Biomass Burning on the Ambient Air Quality of Lumbini

NASA Astrophysics Data System (ADS)

Mehra, M.; Panday, A. K.; Praveen, P. S.; Bhujel, A.; Pokhrel, S.; Ram, K.

2017-12-01

The emissions from increasing anthropogenic activities has led to degradation in ambient air quality of Lumbini (UNESCO world heritage site) and its surrounding environments. The presence of high concentrations of air pollutants is of concern because of its implications for public health, atmospheric visibility, chemistry, crop yield, weather and climate on a local to regional scale. The study region experiences wide-spread on-field agricultural residue burning, particularly in the months of November (paddy residue burning) and April (wheat residue burning). In an attempt to study the impact of emissions from post-harvest burning of paddy and wheat residue in Nepal, the International Centre for Integrated Mountain Development, in collaboration with the Government of Nepal's Department of Environment and the Lumbini International Research Institute, established the Lumbini Air Quality Observatory (LAQO) in May 2016 for continuous measurement of Black carbon (BC), particulate matter (PM10, PM2.5 & PM1), as well as concentration of gaseous pollutant and meteorological parameters. Here we present results of the surface observations from LAQO for the months with intensified paddy and wheat open biomass burning during November 2016 and April 2017, respectively. The average concentrations of BC, PM2.5 and PM10 were 11.3±6.2 µg m-3, 96.7±48.9 µg m-3 and 132.3±59.1 µg m-3 respectively during the month of November 2016. On the other hand, the surface concentrations of BC, PM2.5 and PM10 were found to be 11.0±8.3 µg m-3, 45.0±35.0 µg m-3 and 114.0±96.1 µg m-3 during April 2017. A significant increase in the primary pollutant concentration was observed during both types of open agricultural burning periods. However, BC/PM2.5 ratio was almost higher by factor of two during paddy burning as compared to wheat residue burning. Source characteristics and the relative contribution of agricultural burning to PM concentrations at Lumbini are being computed based on measurements of chemical tracers in ambient aerosol samples and these results will be discussed during the conference.

Paléointensités géomagnétiques absolues complémentaires de la Basse Californie : évaluation des données du Pliocène et du Pléistocène inférieur et moyen

NASA Astrophysics Data System (ADS)

Morales, Juan; Goguitchaichvili, Avto; Cañon-Tapia, Edgardo; Negrete, Raquel

2003-11-01

From a large collection (more than 300 oriented cores) of Baja California Mio-Pliocene volcanic units, sampled for magnetostratigraphy and tectonics, 46 samples were selected for Thellier paleointensity experiments because of their low viscosity index, stable remanent magnetization and close to reversible continuous thermomagnetic curves. 19 samples, coming from 4 individual basaltic lava flows, yielded reliable paleointensity estimates with the flow-mean virtual dipole moments (VDM) ranging from 3.6 to 6.2 ×10 22 A m 2. Our results, although not numerous, are of high technical quality and comparable to other paleointensity data recently obtained on younger lava flows. The NRM fractions used for paleointensity determination range from 38 to 79% and the quality factors vary between 4.8 and 16.7, being normally greater than 5. The combination of Baja California data with the available comparable quality Plio-Plesitocene paleointensity results yields a mean VDM of 6.3 ×10 22 A m 2, which is almost 80% of the present geomagnetic axial dipole. Reliable paleointensity results for the last 5 Ma are still scarce and of dissimilar quality, which makes it hard to draw any firm conclusions regarding the Pliocene and Early/Middle Pleistocene evolution of the geomagnetic field. To cite this article: J. Morales et al., C. R. Geoscience 335 (2003).

Soil Pore Characteristics, an Underappreciated Regulatory Factor in GHGs Emission and C Stabilization

NASA Astrophysics Data System (ADS)

Toosi, E. R.; Yu, J.; Doane, T. A.; Guber, A.; Rivers, M. L.; Marsh, T. L.; Ali, K.; Kravchenko, A. N.

2015-12-01

Enduring challenges in understanding soil organic matter (SOM) stability and emission of greenhouse gases (GHGs) from soil stem from complexities of soil processes, many of which occur at micro-scales. The goal of this study is to evaluate the interactive effects soil pore characteristics, soil moisture levels, inherent SOM levels and properties, and substrate quality, on GHGs emission, and accelerated decomposition of native SOM following addition of fresh substrate i.e. priming. Our core hypothesis is that soil pore characteristics play a major role as a mediator in (i) the decomposition of organic matter regardless of its source (i.e. litter vs. native SOM) or substrate quality, as well as in (ii) GHGs emissions. Samples with prevalence of small (<10 μm) vs. large (>30 μm) pores were prepared from soils with similar properties but under long-term contrasting management. The samples were incubated (110 d) at low and optimum soil moisture conditions after addition of high quality (13C-soybean) and low quality (13C-corn) substrate. Headspace gas was analyzed for 13C-CO2 and GHGs on a regularly basis (day 1, 3, 7, 14, 24, 36, 48, 60, 72, 90, and 110). Selected samples were scanned at the early stage of decomposition (7, 14, 24 d) at 2-6 μm resolutions using X-ray computed μ tomography in order to: (1) quantify soil pore characteristics; (2) visualize and quantify distribution of soil moisture within samples of different pore characteristics; and (3) to visualize and measure losses of decomposing plant residue. Initial findings indicate that, consistent with our hypotheses, pore characteristics influenced GHGs emission, and intensity and pattern of plant residue decomposition. The importance of pores was highly pronounced in presence of added plant residue where greater N2O emission occurred in samples with dominant large pores, in contrast to CO2. Further findings will be discussed upon completion of the study and analysis of the results.

77 FR 41403 - Meetings of the Local Government Advisory Committee and the Small Communities Advisory...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-13

... Tuesday, July 31, 2012, 1 p.m.-2 p.m. (EDT). The Committee will discuss air quality issues, water quality.... (EDT). The Committee will discuss air quality issues, water quality issues, environmental justice and...

Preparation and Quality Control of 68Ga-Citrate for PET Applications

PubMed Central

Aghanejad, Ayuob; Jalilian, Amir Reza; Ardaneh, Khosro; Bolourinovin, Fatemeh; Yousefnia, Hassan; Samani, Ali Bahrami

2015-01-01

Objective(s): In nuclear medicine studies, gallium-68 (8Ga) citrate has been recently known as a suitable infection agent in positron emission tomography (PET). In this study, by applying an in-house produced 68Ge/68Ga generator, a simple technique for the synthesis and quality control of 68Ga-citrate was introduced; followed by preliminary animal studies. Methods: 68GaCl3 eluted from the generator was studied in terms of quality control factors including radiochemical purity (assessed by HPLC and RTLC), chemical purity (assessed by ICP-EOS), radionuclide purity (evaluated by HPGe), and breakthrough. 68Ga-citrate was prepared from eluted 68GaCl3 and sodium citrate under various reaction conditions. Stability of the complex was evaluated in human serum for 2 h at 370C, followed by biodistribution studies in rats for 120 min. Results: 68Ga-citrate was prepared with acceptable radiochemical purity (>97 ITLC and >98% HPLC), specific activity (4-6 GBq/mM), chemical purity (Sn, Fe<0.3 ppm and Zn<0.2 ppm) within 15 min at 500C. The biodistribution of 68Ga-citrate was consistent with former reports up to 120 minutes. Conclusion: This study demonstrated the possible in-house preparation and quality control of 68Ga-citrate, using a commercially available 68Ge/68Ga generator for PET imaging throughout the country. PMID:27408889

Transmission of laser pulses with high output beam quality using step-index fibers having large cladding

DOEpatents

Yalin, Azer P; Joshi, Sachin

2014-06-03

An apparatus and method for transmission of laser pulses with high output beam quality using large core step-index silica optical fibers having thick cladding, are described. The thick cladding suppresses diffusion of modal power to higher order modes at the core-cladding interface, thereby enabling higher beam quality, M.sup.2, than are observed for large core, thin cladding optical fibers. For a given NA and core size, the thicker the cladding, the better the output beam quality. Mode coupling coefficients, D, has been found to scale approximately as the inverse square of the cladding dimension and the inverse square root of the wavelength. Output from a 2 m long silica optical fiber having a 100 .mu.m core and a 660 .mu.m cladding was found to be close to single mode, with an M.sup.2=1.6. Another thick cladding fiber (400 .mu.m core and 720 .mu.m clad) was used to transmit 1064 nm pulses of nanosecond duration with high beam quality to form gas sparks at the focused output (focused intensity of >100 GW/cm.sup.2), wherein the energy in the core was <6 mJ, and the duration of the laser pulses was about 6 ns. Extending the pulse duration provided the ability to increase the delivered pulse energy (>20 mJ delivered for 50 ns pulses) without damaging the silica fiber.

Effective dose equivalent on the ninth Shuttle--Mir mission (STS-91)

NASA Technical Reports Server (NTRS)

Yasuda, H.; Badhwar, G. D.; Komiyama, T.; Fujitaka, K.

2000-01-01

Organ and tissue doses and effective dose equivalent were measured using a life-size human phantom on the ninth Shuttle-Mir Mission (STS-91, June 1998), a 9.8-day spaceflight at low-Earth orbit (about 400 km in altitude and 51.65 degrees in inclination). The doses were measured at 59 positions using a combination of thermoluminescent dosimeters of Mg(2)SiO(4):Tb (TDMS) and plastic nuclear track detectors (PNTD). In correcting the change in efficiency of the TDMS, it was assumed that reduction of efficiency is attributed predominantly to HZE particles with energy greater than 100 MeV nucleon(-1). A conservative calibration curve was chosen for determining LET from the PNTD track-formation sensitivities. The organ and tissue absorbed doses during the mission ranged from 1.7 to 2.7 mGy and varied by a factor of 1.6. The dose equivalent ranged from 3.4 to 5.2 mSv and varied by a factor of 1.5 on the basis of the dependence of Q on LET in the 1990 recommendations of the ICRP. The effective quality factor (Q(e)) varied from 1.7 to 2.4. The dose equivalents for several radiation-sensitive organs, such as the stomach, lung, gonad and breast, were not significantly different from the skin dose equivalent (H(skin)). The effective dose equivalent was evaluated as 4.1 mSv, which was about 90% of the H(skin).

Calculation of k{sub Q{sub c{sub l{sub i{sub n,Q{sub m{sub s{sub r}{sup f{sub c}{sub l}{sub i}{sub n},f{sub m}{sub s}{sub r}}}}}}}}} for several small detectors and for two linear accelerators using Monte Carlo simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Francescon, P.; Cora, S.; Satariano, N.

2011-12-15

Purpose: The scope of this study was to determine a complete set of correction factors for several detectors in static small photon fields for two linear accelerators (linacs) and for several detectors. Methods: Measurements for Monte Carlo (MC) commissioning were performed for two linacs, Siemens Primus and Elekta Synergy. After having determined the source parameters that best fit the measurements of field specific output factors, profiles, and tissue-phantom ratio, the generalized version of the classical beam quality correction factor for static small fields, k{sub Q{sub c{sub l{sub i{sub n,Q{sub m{sub s{sub r}{sup f{sub c}{sub l}{sub i}{sub n},f{sub m}{sub s}{sub r}}}}}}}}},more » were determined for several types of detectors by using the egs{sub c}hamber Monte Carlo user code which can accurately reproduce the geometry and the material composition of the detector. The influence of many parameters (energy and radial FWHM of the electron beam source, field dimensions, type of accelerator) on the value of k{sub Q{sub c{sub l{sub i{sub n,Q{sub m{sub s{sub r}{sup f{sub c}{sub l}{sub i}{sub n},f{sub m}{sub s}{sub r}}}}}}}}} was evaluated. Moreover, a MC analysis of the parameters that influence the change of k{sub Q{sub c{sub l{sub i{sub n,Q{sub m{sub s{sub r}{sup f{sub c}{sub l}{sub i}{sub n},f{sub m}{sub s}{sub r}}}}}}}}} as a function of field dimension was performed. A detailed analysis of uncertainties related to the measurements of the field specific output factor and to the Monte Carlo calculation of k{sub Q{sub c{sub l{sub i{sub n,Q{sub m{sub s{sub r}{sup f{sub c}{sub l}{sub i}{sub n},f{sub m}{sub s}{sub r}}}}}}}}} was done. Results: The simulations demonstrated that the correction factor k{sub Q{sub c{sub l{sub i{sub n,Q{sub m{sub s{sub r}{sup f{sub c}{sub l}{sub i}{sub n},f{sub m}{sub s}{sub r}}}}}}}}} can be considered independent from the quality beam factor Q in the range 0.68 {+-} 0.01 for all the detectors analyzed. The k{sub Q{sub c{sub l{sub i{sub n,Q{sub m{sub s{sub r}{sup f{sub c}{sub l}{sub i}{sub n},f{sub m}{sub s}{sub r}}}}}}}}} of PTW 60012 and EDGE diodes can be assumed dependent only on the field size, for fields down to 0.5 x 0.5 cm{sup 2}. The microLion, and the microchambers, instead, must be used with some caution because they exhibit a slight dependence on the radial FWHM of the electron source, and therefore, a correction factor only dependent on field size can be used for fields {>=}0.75 x 0.75 and {>=}1.0 x 1.0 cm{sup 2}, respectively. The analysis of uncertainties gave an estimate of uncertainty for the 0.5 x 0.5 cm{sup 2} field of about 0.7% (1{sigma}) for k{sub Q{sub c{sub l{sub i{sub n,Q{sub m{sub s{sub r}{sup f{sub c}{sub l}{sub i}{sub n},f{sub m}{sub s}{sub r}}}}}}}}} factor and of about 1.0% (1{sigma}) for the field output factor, {Omega}{sub Q{sub c{sub l{sub i{sub n,Q{sub m{sub s{sub r}{sup f{sub c}{sub l}{sub i}{sub n},f{sub m}{sub s}{sub r}}}}}}}}}, of diodes, microchambers, and microLion. Conclusions: Stereotactic diodes with the appropriate k{sub Q{sub c{sub l{sub i{sub n,Q{sub m{sub s{sub r}{sup f{sub c}{sub l}{sub i}{sub n},f{sub m}{sub s}{sub r}}}}}}}}} are recommended for determining {Omega}{sub Q{sub c{sub l{sub i{sub n,Q{sub m{sub s{sub r}{sup f{sub c}{sub l}{sub i}{sub n},f{sub m}{sub s}{sub r}}}}}}}}} of small photon beams.« less

New determinations of Q quality factors and eigenfrequencies for the whole set of singlets of the Earth's normal modes 0S 0, 0S 2, 0S 3 and 2S 1 using superconducting gravimeter data from the GGP network

NASA Astrophysics Data System (ADS)

Roult, Geneviève; Rosat, Séverine; Clévédé, Eric; Millot-Langet, Raphaële; Hinderer, Jacques

2006-01-01

We present new modal Q measurements of the 0S 0 and 0S 2 modes, and first modal frequencies and Q measurements of 2S 1 and 0S 3 modes. The high quality of the GGP (Global Geodynamics Project) superconducting gravimeters (SGs) contributes to the clear observation of seismic normal modes at frequencies lower than 1 mHz and offers a good opportunity for studying the behaviour of these modes. The interest of scientists in the gravest normal modes is due to the fact that they do contribute to a better knowledge of the density profile in the Earth, helping to constrain Earth's models. These modes have been clearly identified after some large recent events recorded with superconducting gravimeters, particularly well-suited for low-frequency investigations. The Ms = 8.1 (Mw = 8.4) Peruvian earthquake of June 2001 and the Ms = 9.0 (Mw = 9.3) Sumatra-Andaman earthquake of December 2004 provide us with individual spectra which exhibit a clear splitting of the spheroidal modes 0S 2, 0S 3 and 2S 1, and a clear identification of each of the individual singlets, with a resolution never obtained from broad-band seismometers records. The Q quality factors have been determined from the apparent decrease of the amplitude of each singlet with time, according to a well-suited technique [Roult, G., Clévédé, E., 2000. New refinements in attenuation measurements from free-oscillation and surface-wave observations. Phys. Earth Planet. Inter. 121, 1-37]. The results are compared to the theoretical frequencies and Q quality factors computed for the PREM and 1066A models, taking into account both rotation and ellipticity effects of the Earth. The two observed datasets (frequencies and Q quality factors) exhibit a splitting on the observed values different from the predicted one. That seems to point out that some parameters as density or attenuation values used in the theoretical models do not explain the observations. A new dataset of frequencies and Q quality factors of the whole set of singlets of the gravest spheroidal modes is thus under construction. That dataset includes the five individual singlets of the 0S 2 mode clearly identified on the SG records, the three singlets of the 2S 1 mode recently observed for the first time by [Rosat, S., Hinderer, J., Rivera, L., 2003b. First observation of 2S 1 and study of the splitting of the football mode 0S 2 after the June 2001 Peru earthquake of magnitude 8.4. Geophys. Res. Lett. 30, 21211, doi:10-1029/2003L018304], the 0S 0 radial mode, and the seven individual singlets of the 0S 3 mode.

Prospective memory, personality, and individual differences.

PubMed

Uttl, Bob; White, Carmela A; Wong Gonzalez, Daniela; McDouall, Joanna; Leonard, Carrie A

2013-01-01

A number of studies investigating the relationship between personality and prospective memory (ProM) have appeared during the last decade. However, a review of these studies reveals little consistency in their findings and conclusions. To clarify the relationship between ProM and personality, we conducted two studies: a meta-analysis of prior research investigating the relationships between ProM and personality, and a study with 378 participants examining the relationships between ProM, personality, verbal intelligence, and retrospective memory. Our review of prior research revealed great variability in the measures used to assess ProM, and in the methodological quality of prior research; these two factors may partially explain inconsistent findings in the literature. Overall, the meta-analysis revealed very weak correlations (rs ranging from 0.09 to 0.10) between ProM and three of the Big Five factors: Openness, Conscientiousness, and Agreeableness. Our experimental study showed that ProM performance was related to individual differences such as verbal intelligence as well as to personality factors and that the relationship between ProM and personality factors depends on the ProM subdomain. In combination, the two studies suggest that ProM performance is relatively weakly related to personality factors and more strongly related to individual differences in cognitive factors.

Prospective Memory, Personality, and Individual Differences

PubMed Central

Uttl, Bob; White, Carmela A.; Wong Gonzalez, Daniela; McDouall, Joanna; Leonard, Carrie A.

2012-01-01

A number of studies investigating the relationship between personality and prospective memory (ProM) have appeared during the last decade. However, a review of these studies reveals little consistency in their findings and conclusions. To clarify the relationship between ProM and personality, we conducted two studies: a meta-analysis of prior research investigating the relationships between ProM and personality, and a study with 378 participants examining the relationships between ProM, personality, verbal intelligence, and retrospective memory. Our review of prior research revealed great variability in the measures used to assess ProM, and in the methodological quality of prior research; these two factors may partially explain inconsistent findings in the literature. Overall, the meta-analysis revealed very weak correlations (rs ranging from 0.09 to 0.10) between ProM and three of the Big Five factors: Openness, Conscientiousness, and Agreeableness. Our experimental study showed that ProM performance was related to individual differences such as verbal intelligence as well as to personality factors and that the relationship between ProM and personality factors depends on the ProM subdomain. In combination, the two studies suggest that ProM performance is relatively weakly related to personality factors and more strongly related to individual differences in cognitive factors. PMID:23525147

The Impact of a Laki-style Eruption on Cloud Drops, Indirect Radiative Forcing and Air Quality

NASA Astrophysics Data System (ADS)

Carslaw, K.; Schmidt, A.; Mann, G.; Pringle, K. J.; Forster, P.; Wilson, M.; Thordarson, T.

2010-12-01

We assess the impact of 1783-1784 Laki eruption on changes in cloud drop number concentrations and the aerosol indirect (cloud) radiative forcing using an advanced global aerosol microphysics model. We further extend these simulations to quantify the impact of a modern-day Laki on air quality. Our results suggest that the first aerosol indirect effect is of similar magnitude as the direct forcing calculated in previous assessments of the Laki eruption, but has a different spatial pattern. We estimate that northern hemisphere mean cloud drop concentrations in low-level clouds increased by a factor 2.7 in the 3 months after the onset of the eruption, with peak changes exceeding a factor 10. The calculated northern hemisphere mean aerosol indirect effect peaks at -5.2 W/m2 in the month after the eruption and remains larger than -2 W/m2 for 6 months. From our understanding of anthropogenic aerosol effects on modern-day clouds, the calculated changes in cloud drop concentrations after Laki are likely to have caused substantial changes in pecipitation and cloud dynamics. Our results also show that a modern-day Laki-style volcanic air pollution event would be a severe health hazard, increasing excess mortality in Europe on a scale that is at least comparable with excess mortality due to seasonal flu. Investigating the potential impact of such an eruption is crucial in order to inform policy makers and society about the potential impact of such an event so that precautionary measures can be taken.

Assessment of PM2.5 concentrations on Human Health: A case study of Delhi, India

NASA Astrophysics Data System (ADS)

Goyal, P.; Mishra, D.

2015-12-01

Connection of air quality with human health is well established in the literature. However the associated health risks due to fine particulate matter (PM2.5) concentration is not well known in India, while the assigned mean threshold values are 60 μg/m3 for 24-hour period and 40 μg/m3 for annual period. Both are considered safe concentration limits regarding human health effects. However, the daily and annually concentrations of PM2.5 were observed more than three times of NAAQS in the present study for a year. This study relates the incessant exposure to significant levels of PM2.5 to deleterious health effects, such as heart and lung diseases. The relation between environmental air quality and human health has been studied through different parameters e.g., hazard quotient (HQ), lifetime incremental cancer risk (LICR), and individual risk for different groups of ages in Delhi, the capital city of India. These analysis lead to additional insights into health disparities and may suggest that more rigorous strategies. This may be application to other urban areas across the nation. In this study, we propose to quantify such impacts through estimation of different health risk factors.

Do Complication Rates Differ by Gender After Metal-on-metal Hip Resurfacing Arthroplasty? A Systematic Review.

PubMed

Haughom, Bryan D; Erickson, Brandon J; Hellman, Michael D; Jacobs, Joshua J

2015-08-01

Although metal-on-metal (MoM) bearing surfaces provide low rates of volumetric wear and increased stability, evidence suggests that certain MoM hip arthroplasties have high rates of complication and failure. Some evidence indicates that women have higher rates of failure compared with men; however, the orthopaedic literature as a whole has poorly reported such complications stratified by gender. This systematic review aimed to: (1) compare the rate of adverse local tissue reaction (ALTR); (2) dislocation; (3) aseptic loosening; and (4) revision between men and women undergoing primary MoM hip resurfacing arthroplasty (HRA). Systematic MEDLINE and EMBASE searches identified all level I to III articles published in peer-reviewed journals, reporting on the outcomes of interest, for MoM HRA. Articles were limited to those with 2-year followup that reported outcomes by gender. Ten articles met inclusion criteria. Study quality was evaluated using the Modified Coleman Methodology Score; the overall quality was poor. Heterogeneity and bias were analyzed using a Mantel-Haenszel statistical method. Women demonstrated an increased odds of developing ALTR (odds ratio [OR], 5.70 [2.71-11.98]; p<0.001), dislocation (OR, 3.04 [1.2-7.5], p=0.02), aseptic loosening (OR, 3.18 [2.21-4.58], p<0.001), and revision (OR, 2.50 [2.25-2.78], p<0.001) after primary MoM HRA. A systematic review of the currently available literature reveals a higher rate of complications (ALTR, dislocation, aseptic loosening, and revision) after MoM HRA in women compared with men. Although femoral head size has been frequently implicated as a prime factor in the higher rate of complication in women, further research is necessary to specifically probe this relationship. Retrospective studies of data available (eg, registry data) should be undertaken, and moving forward studies should report outcomes by gender (particularly complications). Level III, therapeutic study.

Canadian National Dairy Study: Herd-level milk quality.

PubMed

Bauman, C A; Barkema, H W; Dubuc, J; Keefe, G P; Kelton, D F

2018-03-01

The objective of this study was to estimate Canadian national milk quality parameters and estimate the bulk tank milk (BTM) prevalence of 4 mastitis pathogens, Staphylococcus aureus, Streptococcus agalactiae, Mycoplasma bovis, and Prototheca spp., on Canadian dairy farms. A questionnaire was sent to all Canadian dairy producers. Of the 1,062 producers who completed the questionnaire, 374 producers from across the country were visited and milking hygiene was assessed. Farm-level milk quality data for all Canadian dairy producers was collected from the provincial marketing boards and combined with the questionnaire and farm visit data. In addition, a BTM sample was collected either during the farm visit or by the marketing board in November of 2015 and was tested for 4 major mastitis pathogens using the PathoProof Mastitis Major 4 PCR Assay (Thermo Fisher Scientific Inc., Waltham, MA). Apparent herd-level prevalence was 46% for S. aureus, 6% for Prototheca spp., 0% for M. bovis, and 0% for Strep. agalactiae. Due to the low prevalence of M. bovis and Strep. agalactiae and a lack of significant factors associated with farms testing positive for Prototheca spp., an association analysis could only be carried out for Staph. aureus-positive farms. Factors associated with Staph. aureus-positive farms were not fore-stripping cows before milking (odds ratio = 1.87), milking with a pipeline system (odds ratio = 2.21), and stall bases made of a rubberized surface (mats and mattresses), whereas protective factors were using blanket dry cow therapy (odds ratio = 0.49) and applying a tag or visible mark on cows known to have chronic mastitis infections (odds ratio = 0.45). The Canadian national production-weighted geometric mean somatic cell count was determined to be 208,000 cells/mL. This is the first national dairy study conducted in Canada. Participating farms had higher milk yield; were more likely to have a loose housing system, parlor, or automated milking system; and had lower weighted mean BTM somatic cell count than the national level. Sampling larger farms with better milk quality means the apparent prevalence of the 4 mastitis pathogens likely underestimates the true levels. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

[Improvement of medical processes with Six Sigma - practicable zero-defect quality in preparation for surgery].

PubMed

Sobottka, Stephan B; Töpfer, Armin; Eberlein-Gonska, Maria; Schackert, Gabriele; Albrecht, D Michael

2010-01-01

Six Sigma is an innovative management- approach to reach practicable zero- defect quality in medical service processes. The Six Sigma principle utilizes strategies, which are based on quantitative measurements and which seek to optimize processes, limit deviations or dispersion from the target process. Hence, Six Sigma aims to eliminate errors or quality problems of all kinds. A pilot project to optimize the preparation for neurosurgery could now show that the Six Sigma method enhanced patient safety in medical care, while at the same time disturbances in the hospital processes and failure costs could be avoided. All six defined safety relevant quality indicators were significantly improved by changes in the workflow by using a standardized process- and patient- oriented approach. Certain defined quality standards such as a 100% complete surgical preparation at start of surgery and the required initial contact of the surgeon with the patient/ surgical record on the eve of surgery could be fulfilled within the range of practical zero- defect quality. Likewise, the degree of completion of the surgical record by 4 p.m. on the eve of surgery and their quality could be improved by a factor of 170 and 16, respectively, at sigma values of 4.43 and 4.38. The other two safety quality indicators "non-communicated changes in the OR- schedule" and the "completeness of the OR- schedule by 12:30 a.m. on the day before surgery" also show an impressive improvement by a factor of 2.8 and 7.7, respectively, corresponding with sigma values of 3.34 and 3.51. The results of this pilot project demonstrate that the Six Sigma method is eminently suitable for improving quality of medical processes. In our experience this methodology is suitable, even for complex clinical processes with a variety of stakeholders. In particular, in processes in which patient safety plays a key role, the objective of achieving a zero- defect quality is reasonable and should definitely be aspirated. Copyright © 2010. Published by Elsevier GmbH.

Performance evaluation of iterative reconstruction algorithms for achieving CT radiation dose reduction — a phantom study

PubMed Central

Dodge, Cristina T.; Tamm, Eric P.; Cody, Dianna D.; Liu, Xinming; Jensen, Corey T.; Wei, Wei; Kundra, Vikas

2016-01-01

The purpose of this study was to characterize image quality and dose performance with GE CT iterative reconstruction techniques, adaptive statistical iterative reconstruction (ASiR), and model‐based iterative reconstruction (MBIR), over a range of typical to low‐dose intervals using the Catphan 600 and the anthropomorphic Kyoto Kagaku abdomen phantoms. The scope of the project was to quantitatively describe the advantages and limitations of these approaches. The Catphan 600 phantom, supplemented with a fat‐equivalent oval ring, was scanned using a GE Discovery HD750 scanner at 120 kVp, 0.8 s rotation time, and pitch factors of 0.516, 0.984, and 1.375. The mA was selected for each pitch factor to achieve CTDIvol values of 24, 18, 12, 6, 3, 2, and 1 mGy. Images were reconstructed at 2.5 mm thickness with filtered back‐projection (FBP); 20%, 40%, and 70% ASiR; and MBIR. The potential for dose reduction and low‐contrast detectability were evaluated from noise and contrast‐to‐noise ratio (CNR) measurements in the CTP 404 module of the Catphan. Hounsfield units (HUs) of several materials were evaluated from the cylinder inserts in the CTP 404 module, and the modulation transfer function (MTF) was calculated from the air insert. The results were confirmed in the anthropomorphic Kyoto Kagaku abdomen phantom at 6, 3, 2, and 1 mGy. MBIR reduced noise levels five‐fold and increased CNR by a factor of five compared to FBP below 6 mGy CTDIvol, resulting in a substantial improvement in image quality. Compared to ASiR and FBP, HU in images reconstructed with MBIR were consistently lower, and this discrepancy was reversed by higher pitch factors in some materials. MBIR improved the conspicuity of the high‐contrast spatial resolution bar pattern, and MTF quantification confirmed the superior spatial resolution performance of MBIR versus FBP and ASiR at higher dose levels. While ASiR and FBP were relatively insensitive to changes in dose and pitch, the spatial resolution for MBIR improved with increasing dose and pitch. Unlike FBP, MBIR and ASiR may have the potential for patient imaging at around 1 mGy CTDIvol. The improved low‐contrast detectability observed with MBIR, especially at low‐dose levels, indicate the potential for considerable dose reduction. PACS number(s): 87.57.Q‐, 87.57,nf, 87.57.C‐, 87.57.cj, 87.57.cf, 87.57.cm, 87.57.uq PMID:27074454

Biological interaction between sleep quality and depression in type 2 diabetes.

PubMed

Zhao, J; Li, X-L; Han, K; Tao, Z-Q; Wu, Z-M

2016-07-01

To explore the interaction of sleep quality and depression among patients with type 2 diabetes mellitus (T2DM). With multistage cluster sampling, the living quality of all participants was investigated. The indicator of interaction was calculated according to the delta method and non-conditional logistic regression model. There were 944 residents involved in the final analysis including 365 males and 579 females. The average age was (64 ± 10.2) years. The rate of poor sleep quality and poor sleep quality combined depression were 33.6% and 40.1%, respectively. Due to poor sleep quality and depression in patients with T2DM, the combined interaction index was 2.48 (95% CI 1.44-4.29), the relative excess risk was 3.42 (95% CI 2.16-4.67), and the attributable proportion was 0.51 (95% CI 0.32-0.70). An additive interaction rather than a multiplicative interaction of poor sleep quality and depression in affecting the quality of life was found in T2DM patients. When both factors existed at the same time, the interaction effect of these 2 factors was greater than the sum of the two factors.

Estimating pediatric entrance skin dose from digital radiography examination using DICOM metadata: A quality assurance tool.

PubMed

Brady, S L; Kaufman, R A

2015-05-01

To develop an automated methodology to estimate patient examination dose in digital radiography (DR) imaging using DICOM metadata as a quality assurance (QA) tool. Patient examination and demographical information were gathered from metadata analysis of DICOM header data. The x-ray system radiation output (i.e., air KERMA) was characterized for all filter combinations used for patient examinations. Average patient thicknesses were measured for head, chest, abdomen, knees, and hands using volumetric images from CT. Backscatter factors (BSFs) were calculated from examination kVp. Patient entrance skin air KERMA (ESAK) was calculated by (1) looking up examination technique factors taken from DICOM header metadata (i.e., kVp and mA s) to derive an air KERMA (k air) value based on an x-ray characteristic radiation output curve; (2) scaling k air with a BSF value; and (3) correcting k air for patient thickness. Finally, patient entrance skin dose (ESD) was calculated by multiplying a mass-energy attenuation coefficient ratio by ESAK. Patient ESD calculations were computed for common DR examinations at our institution: dual view chest, anteroposterior (AP) abdomen, lateral (LAT) skull, dual view knee, and bone age (left hand only) examinations. ESD was calculated for a total of 3794 patients; mean age was 11 ± 8 yr (range: 2 months to 55 yr). The mean ESD range was 0.19-0.42 mGy for dual view chest, 0.28-1.2 mGy for AP abdomen, 0.18-0.65 mGy for LAT view skull, 0.15-0.63 mGy for dual view knee, and 0.10-0.12 mGy for bone age (left hand) examinations. A methodology combining DICOM header metadata and basic x-ray tube characterization curves was demonstrated. In a regulatory era where patient dose reporting has become increasingly in demand, this methodology will allow a knowledgeable user the means to establish an automatable dose reporting program for DR and perform patient dose related QA testing for digital x-ray imaging.

Estimating pediatric entrance skin dose from digital radiography examination using DICOM metadata: A quality assurance tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brady, S. L., E-mail: samuel.brady@stjude.org; Kaufman, R. A., E-mail: robert.kaufman@stjude.org

Purpose: To develop an automated methodology to estimate patient examination dose in digital radiography (DR) imaging using DICOM metadata as a quality assurance (QA) tool. Methods: Patient examination and demographical information were gathered from metadata analysis of DICOM header data. The x-ray system radiation output (i.e., air KERMA) was characterized for all filter combinations used for patient examinations. Average patient thicknesses were measured for head, chest, abdomen, knees, and hands using volumetric images from CT. Backscatter factors (BSFs) were calculated from examination kVp. Patient entrance skin air KERMA (ESAK) was calculated by (1) looking up examination technique factors taken frommore » DICOM header metadata (i.e., kVp and mA s) to derive an air KERMA (k{sub air}) value based on an x-ray characteristic radiation output curve; (2) scaling k{sub air} with a BSF value; and (3) correcting k{sub air} for patient thickness. Finally, patient entrance skin dose (ESD) was calculated by multiplying a mass–energy attenuation coefficient ratio by ESAK. Patient ESD calculations were computed for common DR examinations at our institution: dual view chest, anteroposterior (AP) abdomen, lateral (LAT) skull, dual view knee, and bone age (left hand only) examinations. Results: ESD was calculated for a total of 3794 patients; mean age was 11 ± 8 yr (range: 2 months to 55 yr). The mean ESD range was 0.19–0.42 mGy for dual view chest, 0.28–1.2 mGy for AP abdomen, 0.18–0.65 mGy for LAT view skull, 0.15–0.63 mGy for dual view knee, and 0.10–0.12 mGy for bone age (left hand) examinations. Conclusions: A methodology combining DICOM header metadata and basic x-ray tube characterization curves was demonstrated. In a regulatory era where patient dose reporting has become increasingly in demand, this methodology will allow a knowledgeable user the means to establish an automatable dose reporting program for DR and perform patient dose related QA testing for digital x-ray imaging.« less

Cholera Epidemic Associated with Consumption of Unsafe Drinking Water and Street-Vended Water—Eastern Freetown, Sierra Leone, 2012

PubMed Central

Nguyen, Von D.; Sreenivasan, Nandini; Lam, Eugene; Ayers, Tracy; Kargbo, David; Dafae, Foday; Jambai, Amara; Alemu, Wondimagegnehu; Kamara, Abdul; Islam, M. Sirajul; Stroika, Steven; Bopp, Cheryl; Quick, Robert; Mintz, Eric D.; Brunkard, Joan M.

2014-01-01

During 2012, Sierra Leone experienced a cholera epidemic with 22,815 reported cases and 296 deaths. We conducted a matched case-control study to assess risk factors, enrolling 49 cases and 98 controls. Stool specimens were analyzed by culture, polymerase chain reaction (PCR), and pulsed-field gel electrophoresis (PFGE). Conditional logistic regression found that consuming unsafe water (matched odds ratio [mOR]: 3.4; 95% confidence interval [CI]: 1.1, 11.0), street-vended water (mOR: 9.4; 95% CI: 2.0, 43.7), and crab (mOR: 3.3; 95% CI: 1.03, 10.6) were significant risk factors for cholera infection. Of 30 stool specimens, 13 (43%) showed PCR evidence of toxigenic Vibrio cholerae O1. Six specimens yielded isolates of V. cholerae O1, El Tor; PFGE identified a pattern previously observed in seven countries. We recommended ensuring the quality of improved water sources, promoting household chlorination, and educating street vendors on water handling practices. PMID:24470563

Cholera epidemic associated with consumption of unsafe drinking water and street-vended water--Eastern Freetown, Sierra Leone, 2012.

PubMed

Nguyen, Von D; Sreenivasan, Nandini; Lam, Eugene; Ayers, Tracy; Kargbo, David; Dafae, Foday; Jambai, Amara; Alemu, Wondimagegnehu; Kamara, Abdul; Islam, M Sirajul; Stroika, Steven; Bopp, Cheryl; Quick, Robert; Mintz, Eric D; Brunkard, Joan M

2014-03-01

During 2012, Sierra Leone experienced a cholera epidemic with 22,815 reported cases and 296 deaths. We conducted a matched case-control study to assess risk factors, enrolling 49 cases and 98 controls. Stool specimens were analyzed by culture, polymerase chain reaction (PCR), and pulsed-field gel electrophoresis (PFGE). Conditional logistic regression found that consuming unsafe water (matched odds ratio [mOR]: 3.4; 95% confidence interval [CI]: 1.1, 11.0), street-vended water (mOR: 9.4; 95% CI: 2.0, 43.7), and crab (mOR: 3.3; 95% CI: 1.03, 10.6) were significant risk factors for cholera infection. Of 30 stool specimens, 13 (43%) showed PCR evidence of toxigenic Vibrio cholerae O1. Six specimens yielded isolates of V. cholerae O1, El Tor; PFGE identified a pattern previously observed in seven countries. We recommended ensuring the quality of improved water sources, promoting household chlorination, and educating street vendors on water handling practices.

Effects of efforts to optimise morbidity and mortality rounds to serve contemporary quality improvement and educational goals: a systematic review.

PubMed

Smaggus, Andrew; Mrkobrada, Marko; Marson, Alanna; Appleton, Andrew

2018-01-01

The quality and safety movement has reinvigorated interest in optimising morbidity and mortality (M&M) rounds. We performed a systematic review to identify effective means of updating M&M rounds to (1) identify and address quality and safety issues, and (2) address contemporary educational goals. Relevant databases (Medline, Embase, PubMed, Education Resource Information Centre, Cumulative Index to Nursing and Allied Health Literature, Healthstar, and Global Health) were searched to identify primary sources. Studies were included if they (1) investigated an intervention applied to M&M rounds, (2) reported outcomes relevant to the identification of quality and safety issues, or educational outcomes relevant to quality improvement (QI), patient safety or general medical education and (3) included a control group. Study quality was assessed using the Medical Education Research Study Quality Instrument and Newcastle-Ottawa Scale-Education instruments. Given the heterogeneity of interventions and outcome measures, results were analysed thematically. The final analysis included 19 studies. We identified multiple effective strategies (updating objectives, standardising elements of rounds and attaching rounds to a formal quality committee) to optimise M&M rounds for a QI/safety purpose. These efforts were associated with successful integration of quality and safety content into rounds, and increased implementation of QI interventions. Consistent effects on educational outcomes were difficult to identify, likely due to the use of methodologies ill-fitted for educational research. These results are encouraging for those seeking to optimise the quality and safety mission of M&M rounds. However, the inability to identify consistent educational effects suggests the investigation of M&M rounds could benefit from additional methodologies (qualitative, mixed methods) in order to understand the complex mechanisms driving learning at M&M rounds. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Effect of climate change and mollusc invasion on eutrophication and algae blooms in the lagoon ecosystems of the Baltic Sea

NASA Astrophysics Data System (ADS)

Aleksandrov, Sergei; Gorbunova, Julia; Rudinskaya, Lilia

2015-04-01

Coastal lagoons are most vulnerable to impacts of natural environmental and anthropogenic factors. The Curonian Lagoon and Vistula Lagoon are the largest coastal lagoons of the Baltic Sea, relating to the most highly productive water bodies of Europe. The Curonian Lagoon is choke mostly freshwater lagoon, while the Vistula Lagoon is restricted brackish water lagoon. In the last decades the nutrients loading changes, warming trend and biological invasions are observed. The researches (chlorophyll, primary production, nutrients, phytoplankton, benthos, etc) were carried out monthly since 1991 to 2014. The database includes 1600 stations in the Curonian Lagoon, 1650 stations in the Vistula Lagoon. Eutrophication and algae blooms are most important problems. Multiple reductions of nutrients loading from the watershed area in 1990s did not result in considerable improvement of the ecological situation in the lagoons. The Curonian Lagoon may be characterized as hypertrophic water body with "poor" water quality. Climate change in 1990s-2000s combined with other factors (freshwater, slow-flow exchange, high nutrients concentrations) creates conditions for Cyanobacteria "hyperblooms". Hyperbloom of Cyanophyta (average for the growing season Chl > 100 μg/l) were observed during 4 years in 1990s and 7 years in 2000s. The summer water temperature is the key environmental factor determining the seasonal and long-term variability of the primary production and algae blooms. Mean annual primary production in 2010-2014 (600 gC·m-2·year-1) is considerable higher, than in the middle of 1970s (300 gC·m-2·year-1). The local climate warming in the Baltic region caused ongoing eutrophication and harmful algae blooms in the Curonian Lagoon despite of significant reduction of nutrients loading in 1990s-2000s. Harmful algal blooms in July-October (chlorophyll to 700-3400 μg/l) result in deterioration of the water chemical parameters, death of fish in the coastal zone and pollution with toxins, symptoms of exposure are observed at different trophic levels (zooplankton, fish). "Hyperblooms" of Cyanobacteria is the most dangerous for coastal towns (Polessk, Zelenogradsk) and tourist resorts (UNESCO National Park "Curonian Spit"). Also, unfavorable effects of eutrophication have been observed in restricted Vistula Lagoon. Mean annual temperature increased by 1.4°С for 40 years, and water warming combined with other factors created conditions for phytoplankton "hyperblooms" (70-80 μg Chl/l) in 1995-2010. Mean annual primary production in 2000s (430 gC·m-2·year-1) is considerable higher, than in the middle of 1970s (300 gC·m-2·year-1). The climate warming was cause ongoing eutrophication and harmful algal blooms in summer in 1990-2010 despite of significant reduction of nutrients loading in the lagoon. After the invasion of the North American filter-feeding bivalve Rangia cuneata the benthic biomass increased by 8 times (360 g/m2), and chlorophyll decreased by 3.5 times (10 μg/l) in 2011. Water quality is significantly improved from "poor" to "satisfactory" level in 2011-2014, e.g., transparency increased by 2 times. The phytoplankton assimilation numbers increased to maximum (300-400 mgC·mgChl-1·day-1), which are discover in aquatic ecosystems, and primary production remained at previous level. Therefore mollusc invasion improved water quality, but Vistula lagoon ecosystem remained at eutrophic-hypertrophic level. This allowed the function to other trophic groups (zooplankton, fish) at a stable long-term level.

Reduction of effective dose and organ dose to the eye lens in head MDCT using iterative image reconstruction and automatic tube current modulation.

PubMed

Ryska, Pavel; Kvasnicka, Tomas; Jandura, Jiri; Klzo, Ludovit; Grepl, Jakub; Zizka, Jan

2014-06-01

To compare the effective and eye lens radiation dose in helical MDCT brain examinations using automatic tube current modulation in conjunction with either standard filtered back projection (FBP) technique or iterative reconstruction in image space (IRIS). Of 400 adult brain MDCT examinations, 200 were performed using FBP and 200 using IRIS with the following parameters: tube voltage 120 kV, rotation period 1 second, pitch factor 0.55, automatic tube current modulation in both transverse and longitudinal planes with reference mAs 300 (FBP) and 200 (IRIS). Doses were calculated from CT dose index and dose length product values utilising ImPACT software; the organ dose to the lens was derived from the actual tube current-time product value applied to the lens. Image quality was assessed by two independent readers blinded to the type of image reconstruction technique. The average effective scan dose was 1.47±0.26 mSv (FBP) and 0.98±0.15 mSv (IRIS), respectively (33.3% decrease). The average organ dose to the eye lens decreased from 40.0±3.3 mGy (FBP) to 26.6±2.0 mGy (IRIS, 33.5% decrease). No significant change in diagnostic image quality was noted between IRIS and FBP scans (P=0.17). Iterative reconstruction of cerebral MDCT examinations enables reduction of both effective and organ eye lens dose by one third without signficant loss of image quality.

Dielectric and piezoelectric properties of CeO2-added nonstoichiometric (Na0.5K0.5)0.97(Nb0.96Sb0.04)O3 ceramics for piezoelectric energy harvesting device applications.

PubMed

Oh, Youngkwang; Noh, Jungrae; Yoo, Juhyun; Kang, Jinhee; Hwang, Larkhoon; Hong, Jaeil

2011-09-01

In this study, nonstoichiometric (Na(0.5)K(0.5))(0.97)(Nb(0.96)Sb(0.04))O(3) ceramics were fabricated and their dielectric and piezoelectric properties were investigated according to the CeO(2) addition. In this ceramic composition, CeO(2) addition improved sinterability, electromechanical coupling factor k(p), mechanical quality factor Q(m), piezoelectric constant d(33), and g(33). At the sintering temperature of 1100°C, for the 0.2wt% CeO(2) added specimen, the optimum values of density = 4.359 g/cm(3), k(p) = 0.443, Q(m) = 588, ε(r) = 444, d(33) = 159 pC/N, and g(33) = 35 × 10(-3) V·m/N, were obtained. A piezoelectric energy harvesting device using 0.2 wt% CeO(2)- added lead-free (K(0.5)Na(0.5))(0.97)(Nb(0.96)Sb(0.04))O(3) ceramics and a rectifying circuit for energy harvesting were fabricated and their electrical characteristics were investigated. Under an external vibration acceleration of 0.7 g, when the mass, the frequency of vibration generator, and matching load resistance were 2.4 g, 70 Hz, and 721 Ω, respectively, output voltage and power of piezoelectric harvesting device indicated the optimum values of 24.6 mV(rms) and 0.839 μW, respectively-suitable for application as the electric power source of a ubiquitous sensor network (USN) sensor node.

High field Q slope and the effect of low-temperature baking at 3 GHz

NASA Astrophysics Data System (ADS)

Ciovati, G.; Eremeev, G.; Hannon, F.

2018-01-01

A strong degradation of the unloaded quality factor with field, called high field Q slope, is commonly observed above Bp ≅100 mT in elliptical superconducting niobium cavities at 1.3 and 1.5 GHz. In the present experiments several 3 GHz niobium cavities were measured up to and above Bp ≅100 mT . The measurements show that a high field Q slope phenomenon limits the field reach at this frequency, that the high field Q slope onset field depends weakly on the frequency, and that the high field Q slope can be removed by the typical empirical solution of electropolishing followed by heating to 120°C for 48 hrs. In addition, one of the cavities reached a quench field of 174 mT and its field dependence of the quality factor was compared against global heating predicted by a thermal feedback model.

Dissolved organic matter signatures vary between naturally acidic, circumneutral and groundwater-fed freshwaters in Australia.

PubMed

Holland, Aleicia; Stauber, Jenny; Wood, Chris M; Trenfield, Melanie; Jolley, Dianne F

2018-06-15

Dissolved organic matter (DOM) plays important roles in both abiotic and biotic processes within aquatic ecosystems, and these in turn depend on the quality of the DOM. We collected and characterized chromophoric DOM (CDOM) from different Australian freshwater types (circumneutral, naturally acidic and groundwater-fed waterways), climatic regions and seasons. CDOM quality was characterized using absorbance and fluorescence spectroscopy. Excitation emission scans followed by parallel factor (PARAFAC) analysis showed that CDOM was characterized by three main components: protein-like, fulvic-like and humic-like components commonly associated with various waters globally in the Openfluor database. Principal component analysis showed that CDOM quality varied between naturally acidic, circumneutral and groundwater-fed waters, with unique CDOM quality signatures shown for each freshwater type. CDOM quality also differed significantly within some sites between seasons. Clear differences in dominant CDOM components were shown between freshwater types. Naturally acidic waters were dominated by highly aromatic (as indicated by the specific absorbance co-efficient (SAC 340 ) and the specific UV absorbance (SUVA 254 ) values which ranged between 31 and 50 cm 2  mg -1 and 3.9-5.7 mg C -1  m -1 respectively), humic-like CDOM of high molecular weight (as indicated by abs 254/365 which ranged from 3.8 to 4.3). In contrast, circumneutral waters were dominated by fulvic-like CDOM of lower aromaticity (SAC 340 : 7-21 cm 2  mg -1 and SUVA 254 : 1.5-3.0 mg C -1  m -1 ) and lower molecular weight (abs 254/365 5.1-9.3). The groundwater-fed site had a higher abundance of protein-like CDOM, which was the least aromatic (SAC 340 : 2-5 cm 2  mg -1 and SUVA 254 : 0.58-1.1 mg C -1  m -1 ). CDOM was generally less aromatic, of a lower molecular weight and more autochthonous in nature during the summer/autumn sampling compared to winter/spring. Significant relationships were shown between various CDOM quality parameters and pH. This is the first study to show that different freshwater types (circumneutral, naturally acidic and groundwater-fed) contain distinct CDOM quality signatures in Australia, a continent with unique flora and geology. Crown Copyright © 2018. Published by Elsevier Ltd. All rights reserved.

USAF Summer Research Program - 1994 Summer Faculty Research Program Final Reports, Volume 2A, Armstrong Laboratory.

DTIC Science & Technology

1994-12-01

meta-analytic approach . Journal of Applied Psychology , 76, 432-446. 6-14 Raju, N.S., & Dowhower, D.P. (1991). The effect of second-order sampling on the... Psychology . HARPER, G., & KEMBER, D. (1989). Interpretation of factor analysis from the approaches to studying inventory. British Journal of Educational...Contemporary Educational Psychology , 12, 381-385. TRIGWELL, K., & PROSSER, M. (1991). Relating approaches to study and quality of learning outcomes at

Dose assessment according to changes in algorithm in cardiac CT

NASA Astrophysics Data System (ADS)

Jang, H. C.; Cho, J. H.; Lee, H. K.; Hong, I. S.; Cho, M. S.; Park, C. S.; Lee, S. Y.; Dong, K. R.; Goo, E. H.; Chung, W. K.; Ryu, Y. H.; Lim, C. S.

2012-06-01

The principal objective of this study was to determine the effects of the application of the adaptive statistical iterative reconstruction (ASIR) technique in combination with another two factors (body mass index (BMI) and tube potential) on radiation dose in cardiac computed tomography (CT). For quantitative analysis, regions of interest were positioned on the central region of the great coronary artery, the right coronary artery, and the left anterior descending artery, after which the means and standard deviations of measured CT numbers were obtained. For qualitative analysis, images taken from the major coronary arteries (right coronary, left anterior descending, and left circumflex) were graded on a scale of 1-5, with 5 indicating the best image quality. Effective dose, which was calculated by multiplying the value of the dose length product by a standard conversion factor of 0.017 for the chest, was employed as a measure of radiation exposure dose. In cardiac CT in patients with BMI of less than 25 kg/m2, the use of 40% ASIR in combination with a low tube potential of 100 kVp resulted in a significant reduction in the radiation dose without compromising diagnostic quality. Additionally, the combination of the 120 kVp protocol and the application of 40% ASIR application for patients with BMI higher than 25 kg/m2 yielded similar results.

Intercomparisons of nine sky brightness detectors.

PubMed

den Outer, Peter; Lolkema, Dorien; Haaima, Marty; van der Hoff, Rene; Spoelstra, Henk; Schmidt, Wim

2011-01-01

Nine Sky Quality Meters (SQMs) have been intercompared during a night time measurement campaign held in the Netherlands in April 2011. Since then the nine SQMs have been distributed across The Netherlands and form the Dutch network for monitoring night sky brightness. The goal of the intercomparison was to infer mutual calibration factors and obtain insight into the variability of the SQMs under different meteorological situations. An ensemble average is built from the individual measurements and used as a reference to infer the mutual calibration factors. Data required additional synchronization prior to the calibration determination, because the effect of moving clouds combined with small misalignments emerges as time jitter in the measurements. Initial scatter of the individual instruments lies between ±14%. Individual night time sums range from -16% to +20%. Intercalibration reduces this to 0.5%, and -7% to +9%, respectively. During the campaign the smallest luminance measured was 0.657 ± 0.003 mcd/m(2) on 12 April, and the largest value was 5.94 ± 0.03 mcd/m(2) on 2 April. During both occurrences interfering circumstances like snow cover or moonlight were absent.

A comparative study of validated spectrophotometric and TLC- spectrodensitometric methods for the determination of sodium cromoglicate and fluorometholone in ophthalmic solution

PubMed Central

Saleh, Sarah S.; Lotfy, Hayam M.; Hassan, Nagiba Y.; Elgizawy, Samia M.

2013-01-01

The determination of sodium cromoglicate (SCG) and fluorometholone (FLU) in ophthalmic solution was developed by simple, sensitive and precise methods. Three spectrophotometric methods were applied: absorptivity factor (a-Factor method), absorption factor (AFM) and mean centering of ratio spectra (MCR). The linearity ranges of SCG were found to be (2.5–35 μg/mL) for (a-Factor method) and (MCR); while for (AFM), it was found to be (7.5–50 μg/mL). The linearity ranges of FLU were found to be (4–16 μg/mL) for (a-Factor method) and (AFM); while for (MCR), it was found to be (2–16 μg/mL). The mean percentage recoveries/RSD for SCG were found to be 100.31/0.90, 100.23/0.57 and 100.43/1.21; while for FLU, they were found to be 100.11/0.56, 99.97/0.35 and 99.94/0.88 using (a-Factor method), (AFM) and (MCR), respectively. A TLC-spectrodensitometric method was developed by separation of SCG and FLU on silica gel 60 F254 using chloroform:methanol:toluene:triethylamine in the ratio of (5:2:4:1 v/v/v/v) as developing system, followed by spectrodensitometric measurement of the bands at 241 nm. The linearity ranges and the mean percentage recoveries/RSD were found to be (0.4–4.4 μg/band), 100.24/1.44 and (0.2–1.6 μg/band), 99.95/1.50 for SCG and FLU, respectively. A comparative study was conducted between the proposed methods to discuss the advantage of each method. The suggested methods were validated in compliance with the ICH guidelines and were successfully applied for the determination of SCG and FLU in their laboratory prepared mixtures and commercial ophthalmic solution in the presence of benzalkonium chloride as a preservative. These methods could be an alternative to different HPLC techniques in quality control laboratories lacking the required facilities for those expensive techniques. PMID:24227962

A Web-Based Survey of Erection Hardness Score and Its Relationship to Aging, Sexual Behavior, Confidence, and Risk Factors in Japan

PubMed Central

Kimura, Masaki; Shimura, Satoru; Tai, Toshihiro; Kobayashi, Hideyuki; Baba, Shiro; Kano, Munehide; Nagao, Koichi

2013-01-01

Introduction Erection hardness is an elemental component of men's sexual quality of life that can be easily measured by the Erection Hardness Score (EHS). However, there are few published data regarding EHS, and there is little understanding of its relationships to aging, men's sexual behavior, sexual confidence, and risk factors in Japan. Aim To assess EHS and how it correlates to aging, sexual behaviors, sexual self-confidence, and risk factors in a Japanese population database. Methods A web-based cross-sectional nationwide survey conducted between March and May 2009 in Japan. Main Outcome Measures EHS, lifestyle factors, comorbidities, general health, sexual confidence, frequency of sexual behaviors, and attitudes toward treatment of erectile dysfunction (ED). Results A total of 7,710 men with a mean age of 39.3 ± 13.0 years participated in this survey. In 6,528 participants who were not using phosphodiesterase type 5 inhibitors, 3,540 (54.2%) had EHS ≤ 3 and 1,196 (18.3%) had EHS ≤ 2. We found a significant age-dependent decrease in EHS, sexual confidence, and frequency of sexual activities. Sexual confidence was strongly associated with higher EHS but was also associated with older age groups, presence of offspring, awareness of better general health, and greater frequency of sexual activity. In age-adjusted multivariate logistic regression, risk factors for a lower EHS (defined as EHS ≤ 2) were heavy smoking, which was defined as more than two packs per day (odds ratio [OR], 1.7) or a history of metabolic syndrome (OR, 1.4), hypertension (OR, 1.2), and diabetes mellitus (OR, 1.4). Conclusions EHS correlates to various elements, such as aging, sexual behaviors, sexual confidence, and ED-related risk factors, and can be a valuable tool in clinical practice for monitoring and treating ED and thereby improving the quality of life for men and their sexual partners. Kimura M, Shimura S, Tai T, Kobayashi H, Baba S, Kano M, and Nagao K. A web-based survey of Erection Hardness Score and its relationship to aging, sexual behavior, confidence, and risk factors in Japan. Sex Med 2013;1:76–86. PMID:25356291

Quality control of mRNP biogenesis: networking at the transcription site.

PubMed

Eberle, Andrea B; Visa, Neus

2014-08-01

Eukaryotic cells carry out quality control (QC) over the processes of RNA biogenesis to inactivate or eliminate defective transcripts, and to avoid their production. In the case of protein-coding transcripts, the quality controls can sense defects in the assembly of mRNA-protein complexes, in the processing of the precursor mRNAs, and in the sequence of open reading frames. Different types of defect are monitored by different specialized mechanisms. Some of them involve dedicated factors whose function is to identify faulty molecules and target them for degradation. Others are the result of a more subtle balance in the kinetics of opposing activities in the mRNA biogenesis pathway. One way or another, all such mechanisms hinder the expression of the defective mRNAs through processes as diverse as rapid degradation, nuclear retention and transcriptional silencing. Three major degradation systems are responsible for the destruction of the defective transcripts: the exosome, the 5'-3' exoribonucleases, and the nonsense-mediated mRNA decay (NMD) machinery. This review summarizes recent findings on the cotranscriptional quality control of mRNA biogenesis, and speculates that a protein-protein interaction network integrates multiple mRNA degradation systems with the transcription machinery. Copyright © 2014 Elsevier Ltd. All rights reserved.

Evaluation of a seven-year air quality simulation using the Weather Research and Forecasting (WRF)/Community Multiscale Air Quality (CMAQ) models in the eastern United States.

PubMed

Zhang, Hongliang; Chen, Gang; Hu, Jianlin; Chen, Shu-Hua; Wiedinmyer, Christine; Kleeman, Michael; Ying, Qi

2014-03-01

The performance of the Weather Research and Forecasting (WRF)/Community Multi-scale Air Quality (CMAQ) system in the eastern United States is analyzed based on results from a seven-year modeling study with a 4-km spatial resolution. For 2-m temperature, the monthly averaged mean bias (MB) and gross error (GE) values are generally within the recommended performance criteria, although temperature is over-predicted with MB values up to 2K. Water vapor at 2-m is well-predicted but significant biases (>2 g kg(-1)) were observed in wintertime. Predictions for wind speed are satisfactory but biased towards over-prediction with 0

Impact of shorter wavelengths on optical quality for laws

NASA Technical Reports Server (NTRS)

Wissinger, Alan B.; Noll, Robert J.; Tsacoyeanes, James G.; Tausanovitch, Jeanette R.

1993-01-01

This study explores parametrically as a function of wavelength the degrading effects of several common optical aberrations (defocus, astigmatism, wavefront tilts, etc.), using the heterodyne mixing efficiency factor as the merit function. A 60 cm diameter aperture beam expander with an expansion ratio of 15:1 and a primary mirror focal ratio of f/2 was designed for the study. An HDOS copyrighted analysis program determined the value of merit function for various optical misalignments. With sensitivities provided by the analysis, preliminary error budget and tolerance allocations were made for potential optical wavefront errors and boresight errors during laser shot transit time. These were compared with the baseline l.5 m CO2 LAWS and the optical fabrication state of the art (SOA) as characterized by the Hubble Space Telescope. Reducing wavelength and changing optical design resulted in optical quality tolerances within the SOA both at 2 and 1 micrometers. However, advanced sensing and control devices would be necessary to maintain on-orbit alignment. Optical tolerance for maintaining boresight stability would have to be tightened by a factor of 1.8 for a 2 micrometers system and by 3.6 for a 1 micrometers system relative to the baseline CO2 LAWS. Available SOA components could be used for operation at 2 micrometers but operation at 1 micrometers does not appear feasible.

High-Power Nd:GdVO4 Innoslab Continuous-Wave Laser under Direct 880 nm Pumping

NASA Astrophysics Data System (ADS)

Deng, Bo; Zhang, Heng-Li; Xu, Liu; Mao, Ye-Fei; He, Jing-Liang; Xin, Jian-Guo

2014-11-01

A high-power cw end-pumped laser device is demonstrated with a slab crystal of Nd:GdVO4 operating at 1063 nm. Diode laser stacks at 880 nm are used to pump Nd:GdVO4 into emitting level 4F3/2. The 149 W output power is presented when the absorbed pump power is 390 W and the optical-to-optical conversion efficiency is 38.2%. When the output power is 120 W, the M2 factors are 2.3 in both directions. Additionally, mode overlap inside the resonator is analyzed to explain the beam quality deterioration.

Outcomes on quality of life, weight loss, and comorbidities after Roux-en-Y gastric bypass.

PubMed

Costa, Roberto Coelho Netto da Cunha; Yamaguchi, Nagamassa; Santo, Marco Aurelio; Riccioppo, Daniel; Pinto-Junior, Paulo Engler

2014-01-01

Bariatric surgery has become the most effective method for producing weight loss in obese patients. The evaluation of improvement of comorbidities and changes in the quality of life are important outcome factors; however, it is necessary to investigate whether they persist over the long term. A cross-sectional study was conducted on 143 obese patients from our institution from February 2007 to February 2008. These patients were divided into five independent groups, one being a control group, plus four other groups with 1, 2, 3, 4 or more years following surgical Roux-en-Y gastric bypass with a silicon ring banded. quality of life forms and anthropometric measurements were performed and its scores correlated with social factors, weight loss success, and status of obesity-related conditions. For the group that was 1 year postoperative, a significant percentage of excess body weight loss (EBWL%) of 81.7% was observed. The groups with 2, 3, 4 or more years of post-surgical follow-up showed a EBWL decline, but without significant difference. The main comorbidity percentages in all patients who had the surgery was as follows: 69.7% for hypertension; 88.2% for diabetes mellitus; and 27.5% for arthropathy. There was a significant decrease in the rate for diabetes resolution (P = 0.035) observed by evolutionary assessment of the comorbidity resolution. The results obtained by BAROS were good, very good, or excellent in more than 96% of patients in all evaluations that were performed. The use of the Moorehead-Ardelt Questionnaire (M/A) demonstrated improvement in the quality of life. Moreover, the quality of life, when evaluated through SF-36, also showed improvement in all related areas after 1 year; however, after 4 years, improvement remained elevated only in the areas of general state of health and functional capacity. The Roux-en-Y gastric bypass procedure was able to achieve EBWL of 81.7% after 1 year following surgery, remaining steady with little decline after this period. Important resolution of comorbidities, such as hypertension and diabetes, was also seen. Immediate surgical outcomes assessed by SF-36 and M/A in the area of quality of life were satisfactory, but the general state of health and functional capacity areas were sustained satisfactory at a later time only.

Emergency department visits and "vog"-related air quality in Hilo, Hawai'i.

PubMed

Michaud, Jon-Pierre; Grove, John Sinclair; Krupitsky, Dmitry

2004-05-01

Emergency department (ED) visits in Hilo, Hawai'i, from January 1997 to May 2001, were examined for associations with volcanic fog, or "vog", measured as sulfur dioxide (SO(2)) and submicrometer particulate matter (PM(1)). Exponential regression models were used with robust standard errors. Four diagnostic groups were examined: asthma/COPD; cardiac; flu, cold, and pneumonia; and gastroenteritis. Before adjustments, highly significant associations with vog-related air quality were seen for all diagnostic groups except gastroenteritis. After adjusting for month, year, and day of the week, only asthma/COPD had consistently positive associations with air quality. The strongest associations were for SO(2) with a 3-day lag (6.8% per 10 ppb; P=0.001) and PM(1), with a 1-day lag (13.8% per 10 microg/m(3); P=0.011). The association of ED visits for asthma/COPD with month of the year was stronger than associations seen with air quality. Although vog appears influential, non-vog factors dominated associations with the frequency of asthma/COPD ED visits.

Silicon surface passivation by polystyrenesulfonate thin films

NASA Astrophysics Data System (ADS)

Chen, Jianhui; Shen, Yanjiao; Guo, Jianxin; Chen, Bingbing; Fan, Jiandong; Li, Feng; Liu, Haixu; Xu, Ying; Mai, Yaohua

2017-02-01

The use of polystyrenesulfonate (PSS) thin films in a high-quality passivation scheme involving the suppression of minority carrier recombination at the silicon surface is presented. PSS has been used as a dispersant for aqueous poly-3,4-ethylenedioxythiophene. In this work, PSS is coated as a form of thin film on a Si surface. A millisecond level minority carrier lifetime on a high resistivity Si wafer is obtained. The film thickness, oxygen content, and relative humidity are found to be important factors affecting the passivation quality. While applied to low resistivity silicon wafers, which are widely used for photovoltaic cell fabrication, this scheme yields relatively shorter lifetime, for example, 2.40 ms on n-type and 2.05 ms on p-type wafers with a resistivity of 1-5 Ω.cm. However, these lifetimes are still high enough to obtain high implied open circuit voltages (Voc) of 708 mV and 697 mV for n-type and p-type wafers, respectively. The formation of oxides at the PSS/Si interface is suggested to be responsible for the passivation mechanism.

Enhanced stability of magnetoelectric gyrators under high power conditions

NASA Astrophysics Data System (ADS)

Leung, Chung Ming; Zhuang, Xin; Gao, Min; Tang, Xiao; Xu, Junran; Li, Jiefang; Zhang, Jitao; Srinivasan, G.; Viehland, D.

2017-10-01

In this study, three different coil-based magnetoelectric (ME) gyrators of different geometries, including gyrators with high power output, have been designed and characterized. These included two magnetostrictive/piezoelectric/magnetostrictive (M-P-M) and one piezoelectric/magnetostrictive/piezoelectric (P-M-P) type ME gyrators, which consisted of nickel zinc ferrite (NZFO) and lead zirconate titanate (PZT) ceramic plates. Compared with M-P-M ME gyrators, the P-M-P ones exhibited a higher power efficiency (η) of 85% when operated at resonance under an optimal magnetic bias field (HBias) of 40 Oe at low power conditions. It retained a relatively high efficiency of η = 79% under a high input power density of 2.87 W/cm3. A low reduction in the magnetomechanical coupling and mechanical quality (k33,m and Qm) factors of the NZFO ferrite layer in the ME gyrator explains the resilience of the P-M-P type structure with increasing power drive. The findings open the possibility of using ME gyrators in high power applications.

Community Building, Emergent Design and Expecting the Unexpected: Creating a Quality eLearning Experience

ERIC Educational Resources Information Center

Thompson, Terrie Lynn; MacDonald, Colla J.

2005-01-01

Given the extraordinary interest and growth in eLearning as a learning tool and as an industry, it is not surprising there is lively debate on quality. A research-based and tested eLearning model was used to design and evaluate an online M.Ed. course in order to study factors that influence the quality of an eLearning event. Several data…

Estimation of gas hydrate saturation using isotropic and anisotropic models at the location selected after measurement of seismic quality factor

NASA Astrophysics Data System (ADS)

Mundhra, A.; Sain, K.; Shankar, U.

2012-12-01

The Indian National Gas Hydrate Program Expedition (NGHP) 01 discovered gas hydrate in unconsolidated sediments at several drilling sites along the continental margins of Krishna-Godavari Basin, India. Presence of gas hydrate reduces the attenuation of travelling seismic waves which can be measured by estimation of seismic quality factor (Dasgupta and Clark, 1998). Here, we use log spectral ratio method (Sain et al, 2009) to compute quality factor at three locations, among which two have strong and one has no bottom simulating reflector (BSR), along seismic cross-line near one of the drilling site. Interval quality factor for three submarine sedimentary layers bounded by seafloor, BSR, one reflector above and another reflector below the BSR has been measured. To compute quality factor, unprocessed pre-stack seismic data has been used to avoid any influence of processing sequence. We have estimated that interval quality factor lies within 200-220 in the interval having BSR while it varies within 90-100 in other intervals. Thereby, high interval quality factor ascertains that observed BSR is due to presence of gas hydrates. We have performed rock physics modelling by using isotropic and anisotropic models, to quantitatively estimate gas hydrate saturation at one of the location where an interval has high quality factor. Abruptly high measured resistivity and high P-wave velocity in the interval, leads to towering hydrate saturation (Archie,1942 and Helegrud et al, 1999) in comparison to lower gas hydrate saturations estimated by pressure core and chlorinity measurements. Overestimation of saturation is attributed to presence of near vertical fractures that are identified from logging-while-drilling resistivity images. We have carried out anisotropic modeling (Kennedy and Herrick, 2004 and Lee,2009) by incorporating fracture volume and fracture porosity to estimate hydrate saturation and have observed that modeled gas hydrate saturations agree with the lower gas hydrate saturations obtained from pressure core and chlorinity measurements. Therefore, we find that 1) quality factor is significantly higher in the interval bearing gas hydrates and is a useful tool to discover hydrate deposits, 2) anisotropy due to presence of near vertical hydrate filled fractures translates into elevated saturation because of high measured resistivity and velocity and 3) anisotropic model greatly corrects the saturation estimates in fractured medium. References: Archie, G.E., 1942. Petroleum Transactions of AIME, 146, 54-62. Dasgupta, R., Clark, R.A., 1998. Geophysics 63, 2120-2128. Kennedy, W.D., Herrick, D.C., 2004. Petrophysics 45, 38-58. Lee, M.W., 2009. U.S. Geological Survey Scientific Investigations Report 2009-5141, 13. Sain, K., Singh, A.K., Thakur, N.K., Khanna, R.K., 2009.Marine Geophysical Researches 30, 137-145.

Defining Metabolically Healthy Obesity: Role of Dietary and Lifestyle Factors

PubMed Central

Phillips, Catherine M.; Dillon, Christina; Harrington, Janas M.; McCarthy, Vera J. C.; Kearney, Patricia M.; Fitzgerald, Anthony P.; Perry, Ivan J.

2013-01-01

Background There is a current lack of consensus on defining metabolically healthy obesity (MHO). Limited data on dietary and lifestyle factors and MHO exist. The aim of this study is to compare the prevalence, dietary factors and lifestyle behaviours of metabolically healthy and unhealthy obese and non-obese subjects according to different metabolic health criteria. Method Cross-sectional sample of 1,008 men and 1,039 women aged 45-74 years participated in the study. Participants were classified as obese (BMI ≥30kg/m2) and non-obese (BMI <30kg/m2). Metabolic health status was defined using five existing MH definitions based on a range of cardiometabolic abnormalities. Dietary composition and quality, food pyramid servings, physical activity, alcohol and smoking behaviours were examined. Results The prevalence of MHO varied considerably between definitions (2.2% to 11.9%), was higher among females and generally increased with age. Agreement between MHO classifications was poor. Among the obese, prevalence of MH was 6.8% to 36.6%. Among the non-obese, prevalence of metabolically unhealthy subjects was 21.8% to 87%. Calorie intake, dietary macronutrient composition, physical activity, alcohol and smoking behaviours were similar between the metabolically healthy and unhealthy regardless of BMI. Greater compliance with food pyramid recommendations and higher dietary quality were positively associated with metabolic health in obese (OR 1.45-1.53 unadjusted model) and non-obese subjects (OR 1.37-1.39 unadjusted model), respectively. Physical activity was associated with MHO defined by insulin resistance (OR 1.87, 95% CI 1.19-2.92, p = 0.006). Conclusion A standard MHO definition is required. Moderate and high levels of physical activity and compliance with food pyramid recommendations increase the likelihood of MHO. Stratification of obese individuals based on their metabolic health phenotype may be important in ascertaining the appropriate therapeutic or intervention strategy. PMID:24146838

Effect of attenuation correction on image quality in emission tomography

NASA Astrophysics Data System (ADS)

Denisova, N. V.; Ondar, M. M.

2017-10-01

In this paper, mathematical modeling and computer simulations of myocardial perfusion SPECT imaging are performed. The main factors affecting the quality of reconstructed images in SPECT are anatomical structures, the diastolic volume of a myocardium and attenuation of gamma rays. The purpose of the present work is to study the effect of attenuation correction on image quality in emission tomography. The basic 2D model describing a Tc-99m distribution in a transaxial slice of the thoracic part of a patient body was designed. This model was used to construct four phantoms simulated various anatomical shapes: 2 male and 2 female patients with normal, obese and subtle physique were included in the study. Data acquisition model which includes the effect of non-uniform attenuation, collimator-detector response and Poisson statistics was developed. The projection data were calculated for 60 views in accordance with the standard myocardial perfusion SPECT imaging protocol. Reconstructions of images were performed using the OSEM algorithm which is widely used in modern SPECT systems. Two types of patient's examination procedures were simulated: SPECT without attenuation correction and SPECT/CT with attenuation correction. The obtained results indicate a significant effect of the attenuation correction on the SPECT images quality.

Source apportionment of major and trace elements in aerosols during smog episodes in large cities in China

NASA Astrophysics Data System (ADS)

Furger, Markus; Rai, Pragati; Visser, Suzanne; Elser, Miriam; Canonaco, Francesco; Slowik, Jay G.; Huang, Ru-Jin; Prévôt, André S. H.; Baltensperger, Urs

2017-04-01

Air pollution in Chinese cities is one of the environmental problems China has to address to mitigate the impacts on human health, air quality and climate. Average concentrations of particulate matter exceed 100 μg m-3 in many places in China, and the government is developing and implementing strategies to reduce the load of pollutants by various measures. A characterization of airborne particulate matter (PM), especially its composition and sources, will help in optimizing reduction and mitigation strategies for air pollution. We collected PM10 aerosols with a rotating drum impactor (RDI) in Xi'an in December 2013 and in Beijing in January 2014 with 30-min time resolution and for three size ranges (cut-off sizes 10, 2.5 and 1 μm). Each campaign encompassed one or more high pollution episodes in the respective city. Elements from Na to Pb were analyzed with synchrotron radiation induced X-ray fluorescence spectrometry (SR-XRF), and the resulting time series were used for source apportionment performed with the Multilinear-Engine 2 (ME-2) implementation of the Positive Matrix Factorization algorithm. The preliminary computations yielded 5 factors for Beijing, namely road dust, sea salt, traffic-related, industrial, coal combustion. For Xi'an an additional desert dust factor was found. Further refinement could be expected from including the smaller size fractions, e.g. a sulfur-rich factor for secondary sulfate or a reacted chlorine factor in the fine mode fraction.

Theoretical and experimental investigations on high peak power Q-switched Nd:YAG laser at 1112 nm

NASA Astrophysics Data System (ADS)

He, Miao; Yang, Feng; Wang, Zhi-Chao; Gao, Hong-Wei; Yuan, Lei; Li, Chen-Long; Zong, Nan; Shen, Yu; Bo, Yong; Peng, Qin-Jun; Cui, Da-Fu; Xu, Zu-Yan

2018-07-01

We report on the experimental measurement and theoretical analysis on a Q-switched high peak power laser diode (LD) side-pumped 1112 nm Nd:YAG laser by means of special mirrors coating design in cavity. In theory, a numerical model, based on four-wavelength rate equations, is performed to analyze the competition process of different gain lines and the output characteristics of the Q-switched Nd:YAG laser. In the experiment, a maximum output power of 25.2 W with beam quality factor M2 of 1.46 is obtained at the pulse repetition rate of 2 kHz and 210 ns of pulse width, corresponding to a pulse energy and peak power of 12.6 mJ and 60 kW, respectively. The experimental data agree well with the theoretical simulation results.

Air quality and acute deaths in California, 2000-2012.

PubMed

Young, S Stanley; Smith, Richard L; Lopiano, Keneth K

2017-08-01

Many studies have shown an association between air quality and acute deaths, and such associations are widely interpreted as causal. Several factors call causation and even association into question, for example multiple testing and multiple modeling, publication bias and confirmation bias. Many published studies are difficult or impossible to reproduce because of lack of access to confidential data sources. Here we make publically available a dataset containing daily air quality levels, PM 2.5 and ozone, daily temperature levels, minimum and maximum and daily maximum relative humidity levels for the eight most populous California air basins, thirteen years, >2M deaths, over 37,000 exposure days. The data are analyzed using standard time series analysis, and a sensitivity analysis is computed varying model parameters, locations and years. Our analysis finds little evidence for association between air quality and acute deaths. These results are consistent with those for the widely cited NMMAPS dataset when the latter are restricted to California. The daily death variability was mostly explained by time of year or weather variables; Neither PM 2.5 nor ozone added appreciably to the prediction of daily deaths. These results call into question the widespread belief that association between air quality and acute deaths is causal/near-universal. Copyright © 2017 Elsevier Inc. All rights reserved.

IMPACT OF SULPHUR DIOXIDE ON THE RESPIRATORY SYSTEM OF TBILISI POPULATION.

PubMed

Vepkhvadze, N; Kiladze, N; Khorbaladze, M; Kochoradze, T; Kugoti, I

2017-04-01

The possible relationship between levels of sulphur dioxide (SO2) in the air and the rate of respiratory diseases has been studied. Results of monitoring of main contaminants of outdoor air were analyzed and they are reflected in Environmental Report 2015. Information on morbidity by respiratory system diseases of Tbilisi population is has been taken from 2011-2015 reports of the National Center of Disease Control. Identified that there is no consistent correlation between sulphur dioxide concentration in the air and respiratory system disease rates in the population, including children. Obtained data demonstrated that during the study period maximum SO2 concentration was registered in 2015 - 0,14 mg/m3 (exceeding almost 3 times maximum permissible concentration - 0,5 mg/m3) and in the same year high morbidity rates are registered (incidence -18106,08), though the lowest rates are registered in 2011 (0,09 mg/m3), when incidence of respiratory system diseases in this period (13103.2) exceeds the rates registered in 2012, 2013 and 2014 (12736.4, 11336.3, 13009.0 accordingly). There is no direct correlation between the morbidity rates of 0-15 year old children and SO2 concentration. Maximum incidence rate is registered in 2015 (48487.0) and in the same year is also registered maximum concentration of SO2 (0,14 mg/m3), whereas the lowest rate is registered in 2013 (35538,70), when SO2 concentration in 2013 is lower only by 0.02 mg/m3 compared to the concentration in 2015. Direct correlation between morbidity with asthma in children and concentration of SO2 was not identified. Prevalence of asthma is minimal in 2014 (65,4), maximal in 2012 (207,1), whereas SO2 concentration in 2014 (0,13 mg/m3) exceeds the concentration in 2012 (0,12 mg/m3). It has to be considered, that besides SO2 there are many small intensity adverse factors, which are also risk factors for development of respiratory diseases. Isolated action of these factors with certain concentrations may not demonstrate any adverse effects on human health, but the combined effect of their action is stronger and obviously will affect general health and specifically - respiratory system. Implementation of urgent measures for further improvement of their ambient air quality has been recommended, which will be the basis for minimizing of many chronic diseases.

The relevance of image quality indices for dose optimization in abdominal multi-detector row CT in children: experimental assessment with pediatric phantoms

NASA Astrophysics Data System (ADS)

Brisse, H. J.; Brenot, J.; Pierrat, N.; Gaboriaud, G.; Savignoni, A.; DeRycke, Y.; Neuenschwander, S.; Aubert, B.; Rosenwald, J.-C.

2009-04-01

This study assessed and compared various image quality indices in order to manage the dose of pediatric abdominal MDCT protocols and to provide guidance on dose reduction. PMMA phantoms representing average body diameters at birth, 1 year, 5 years, 10 years and 15 years of age were scanned in a four-channel MDCT with a standard pediatric abdominal CT protocol. Image noise (SD, standard deviation of CT number), noise derivative (ND, derivative of the function of noise with respect to dose) and contrast-to-noise ratio (CNR) were measured. The 'relative' low-contrast detectability (rLCD) was introduced as a new quantity to adjust LCD to the various phantom diameters on the basis of the LCD1% assessed in a Catphan® phantom and a constant central absorbed dose. The required variations of CTDIvol16 with respect to phantom size were analyzed in order to maintain each image quality index constant. The use of a fixed SD or CNR level leads to major dose ratios between extreme patient sizes (factor 22.7 to 44 for SD, 31.7 to 51.5 for CNR2.8%), whereas fixed ND and rLCD result in acceptable dose ratios ranging between factors of 2.9 and 3.9 between extreme phantom diameters. For a 5-9 mm rLCD1%, adjusted ND values range between -0.84 and -0.11 HU mGy-1. Our data provide guidance on dose reduction on the basis of patient dimensions and the required rLCD (e.g., to get a constant 7 mm rLCD1% for abdominal diameters of 10, 13, 16, 20 and 25 cm, tube current-time product should be adjusted in order to obtain CTDIvol16 values of 6.2, 7.2, 8.8, 11.6 and 17.7 mGy, respectively).

Influence of growing altitude, shade and harvest period on quality and biochemical composition of Ethiopian specialty coffee.

PubMed

Tolessa, Kassaye; D'heer, Jolien; Duchateau, Luc; Boeckx, Pascal

2017-07-01

Coffee quality is a key characteristic for the international market, comprising cup quality and chemical bean constituents. In Ethiopia, using total specialty cup scores, coffees are grouped into Q1 (specialty 1) ≥ 85 and Q2 (80-84.75). This classification results in market segmentation and higher prices. Although different studies have evaluated the effects of altitude and shade on bean quality, optimum shade levels along different altitudinal ranges are not clearly indicated. Information on effects of harvest periods on coffee quality is also scanty. The present study examined the influences of these factors and their interactions on Ethiopian coffee quality RESULTS: Coffee from high altitude with open or medium shade and early to middle harvest periods had a superior bean quality. These growing conditions also favoured the production of beans with lower caffeine. An increasing altitude, from mid to high, at approximately 400 m, decreased caffeine content by 10%. At high altitude, dense shade decreased Q1 coffee by 50%. Compared to late harvesting, early harvesting increased the percentage from 27% to 73%. At mid altitude, > 80% is Q2 coffee. Changes of quality scores driven by altitude, shade and harvest period are small, although they may induce dramatic switches in the fraction Q1 versus Q2 coffee. The latter affects both farmers' profits and competitiveness in international markets. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Crystallization of a 2:2 complex of granulocyte-colony stimulating factor (GCSF) with the ligand-binding region of the GCSF receptor

PubMed Central

Honjo, Eijiro; Tamada, Taro; Maeda, Yoshitake; Koshiba, Takumi; Matsukura, Yasuko; Okamoto, Tomoyuki; Ishibashi, Matsujiro; Tokunaga, Masao; Kuroki, Ryota

2005-01-01

The granulocyte-colony stimulating factor (GCSF) receptor receives signals for regulating the maturation, proliferation and differentiation of the precursor cells of neutrophilic granulocytes. The signalling complex composed of two GCSFs (GCSF, 19 kDa) and two GCSF receptors (GCSFR, 34 kDa) consisting of an Ig-like domain and a cytokine-receptor homologous (CRH) domain was crystallized. A crystal of the complex was grown in 1.0 M sodium formate and 0.1 M sodium acetate pH 4.6 and belongs to space group P41212 (or its enantiomorph P43212), with unit-cell parameters a = b = 110.1, c = 331.8 Å. Unfortunately, this crystal form did not diffract beyond 5 Å resolution. Since the heterogeneity of GCSF receptor appeared to prevent the growth of good-quality crystals, the GCSF receptor was fractionated by anion-exchange chromatography. Crystals of the GCSF–fractionated GCSF receptor complex were grown as a new crystal form in 0.2 M ammonium phosphate. This new crystal form diffracted to beyond 3.0 Å resolution and belonged to space group P3121 (or its enantiomorph P3221), with unit-cell parameters a = b = 134.8, c = 105.7 Å. PMID:16511159

Factors Affecting Quality of Laboratory Services in Public and Private Health Facilities in Addis Ababa, Ethiopia.

PubMed

Mesfin, Eyob Abera; Taye, Binyam; Belay, Getachew; Ashenafi, Aytenew; Girma, Veronica

2017-10-01

Quality laboratory service is an essential component of health care system but in Sub-Saharan Africa such as Ethiopia, laboratories quality system remains weak due to several factors and it needs more attention to strengthen its capacity and quality system. A cross sectional study was conducted using a questionnaire to assess factors affecting the quality of laboratory service at private and public health institutions in Addis Ababa. A total of 213 laboratory professionals participated in the study and 131 (61.5%) participants had bachelor degree. Majority, 133 (62.4%), of the professionals did not attend any work related training. Seventy five (35.2%) respondents believed that their laboratories did not provide quality laboratory services and the major reported factors affecting provision of quality services were shortage of resources (64.3%), poor management support (57.3%), poor equipment quality (53.4%), high workload (41.1%), lack of equipment calibration (38.3%) and lack of knowledge (23.3%). Moreover logistic regression analysis showed that provision of quality laboratory service was significantly associated with result verification (AOR=9.21, 95% CI=2.26, 37.48), internal quality control (AOR= 6.11, 95% CI=2.11, 17.70), turnaround time (AOR=5.11, 95% CI=1.94, 13.46), shortage of equipment (AOR=7.76, 95% CI=2.55, 23.66), communication with clinicians (AOR=3.24, 95% CI=1.25, 8.41) and lack of job description (AOR=3.67, 95% CI=1.319, 10.22). In conclusion, the major factors that affecting the quality of laboratory service were associated with poor human resource management, poor resources provision, poor management commitment, ineffective communication system and lack of well-established quality management system.

Factors Affecting Quality of Laboratory Services in Public and Private Health Facilities in Addis Ababa, Ethiopia

PubMed Central

Taye, Binyam; Belay, Getachew; Ashenafi, Aytenew; Girma, Veronica

2017-01-01

Background Quality laboratory service is an essential component of health care system but in Sub-Saharan Africa such as Ethiopia, laboratories quality system remains weak due to several factors and it needs more attention to strengthen its capacity and quality system. Methodology A cross sectional study was conducted using a questionnaire to assess factors affecting the quality of laboratory service at private and public health institutions in Addis Ababa. Results A total of 213 laboratory professionals participated in the study and 131 (61.5%) participants had bachelor degree. Majority, 133 (62.4%), of the professionals did not attend any work related training. Seventy five (35.2%) respondents believed that their laboratories did not provide quality laboratory services and the major reported factors affecting provision of quality services were shortage of resources (64.3%), poor management support (57.3%), poor equipment quality (53.4%), high workload (41.1%), lack of equipment calibration (38.3%) and lack of knowledge (23.3%). Moreover logistic regression analysis showed that provision of quality laboratory service was significantly associated with result verification (AOR=9.21, 95% CI=2.26, 37.48), internal quality control (AOR= 6.11, 95% CI=2.11, 17.70), turnaround time (AOR=5.11, 95% CI=1.94, 13.46), shortage of equipment (AOR=7.76, 95% CI=2.55, 23.66), communication with clinicians (AOR=3.24, 95% CI=1.25, 8.41) and lack of job description (AOR=3.67, 95% CI=1.319, 10.22). Conclusion In conclusion, the major factors that affecting the quality of laboratory service were associated with poor human resource management, poor resources provision, poor management commitment, ineffective communication system and lack of well-established quality management system. PMID:29075171

Psychometric Validation of the M. D. Anderson Symptom Inventory-Head and Neck Module in the Spanish Language.

PubMed

Sánchez, Daniel; Chala, Andrés; Alvarez, Andrés; Payan, Catalina; Mendoza, Tito; Cleeland, Charles; Sanabria, Alvaro

2016-06-01

The assessment of cancer-related symptoms requires culturally adapted and psychometrically validated symptom assessment tools. The M. D. Anderson Symptom Inventory-Head and Neck Module (MDASI-HN) is a useful instrument for measuring symptom burden that was specifically developed for head and neck cancer patients. To validate the Spanish version of the MDASI-HN. We evaluated the psychometric features of the MDASI-HN in patients with head and neck cancer. We evaluated the item-scale correlations and the internal consistency. We conducted principal axis factoring to identify the underlying dimensions as a measure of construct validity. The convergence/concurrent validity was assessed with the University of Washington Quality of Life Questionnaire for Head and Neck Patients, and known-group validity and test-retest reliability also were assessed. One hundred thirty patients were included. The mean ± SD age was 60.5 ± 13.6 years; 68% of patients were male, 42% had laryngeal tumors, and 45.9% had Stage III tumors. Forty-seven percent of the patients underwent surgery, 55% underwent radiotherapy, and 36% underwent chemotherapy. The global Cronbach alpha for the HN module was 0.81. The factor analysis identified two factors (Factor 1: speech, mucus, coughing, and constipation; Factor 2: teeth, taste, sores, swallowing, and skin). The correlation with the global score of the University of Washington Quality of Life was -0.68. The difference in the MDASI-HN scores according to Eastern Cooperative Oncology Group performance status was statistically significant (2.72 vs. 4.01, P = 0.006). The intraclass test-retest correlation was 0.62. The Spanish version of the MDASI-HN is reliable and valid for evaluating cancer-related symptoms in head and neck cancer patients. Copyright © 2016 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

Characterization and source identification of fine particulate matter in urban Beijing during the 2015 Spring Festival.

PubMed

Ji, Dongsheng; Cui, Yang; Li, Liang; He, Jun; Wang, Lili; Zhang, Hongliang; Wang, Wan; Zhou, Luxi; Maenhaut, Willy; Wen, Tianxue; Wang, Yuesi

2018-07-01

The Spring Festival (SF) is the most important holiday in China for family reunion and tourism. During the 2015 SF an intensive observation campaign of air quality was conducted to study the impact of the anthropogenic activities and the dynamic characteristics of the sources. During the study period, pollution episodes frequently occurred with 12days exceeding the Chinese Ambient Air Quality Standards for 24-h average PM 2.5 (75μg/m 3 ), even 8days with exceeding 150μg/m 3 . The daily maximum PM 2.5 concentration reached 350μg/m 3 while the hourly minimum visibility was <0.8km. Three pollution episodes were selected for detailed analysis including chemical characterization and diurnal variation of the PM 2.5 and its chemical composition, and sources were identified using the Positive Matrix Factorization model. The first episode occurring before the SF was characterized by more formation of SO 4 2- and NO 3 - and high crustal enrichment factors for Ag, As, Cd, Cu, Hg, Pb, Se and Zn and seven categories of pollution sources were identified, whereby vehicle emission contributed 38% to the PM 2.5 . The second episode occurring during the SF was affected heavily by large-scale firework emissions, which led to a significant increase in SO 4 2- , Cl - , OC, K and Ba; these emissions were the largest contributor to the PM 2.5 accounting for 36%. During the third episode occurring after the SF, SO 4 2- , NO 3 - , NH 4 + and OC were the major constituents of the PM 2.5 and the secondary source was the dominant source with a contribution of 46%. The results provide a detailed understanding on the variation in occurrence, chemical composition and sources of the PM 2.5 as well as of the gaseous pollutants affected by the change in anthropogenic activities in Beijing throughout the SF. They highlight the need for limiting the firework emissions during China's most important traditional festival. Copyright © 2018 Elsevier B.V. All rights reserved.

Executive brain functions after exposure to nocturnal traffic noise: effects of task difficulty and sleep quality.

PubMed

Schapkin, Sergei A; Falkenstein, Michael; Marks, Anke; Griefahn, Barbara

2006-04-01

The after-effects of nocturnal traffic noise on cognitive performance and inhibitory brain activity were investigated. Twenty participants (18-30 years) performed an easy and a difficult visual Go/Nogo task with simultaneous EEG recording after a quiet night and then during three nights when aircraft noise was presented with equivalent noise levels of 39, 44, and 50 dBA, respectively, between 11 p.m. to 7 a.m. Based on subjective sleep quality rating, participants were separated into "good" versus "bad" sleepers. The performance and inhibition-related components (N2, P3) of event-related potentials were analysed. The N2 and P3 amplitudes were smaller and latencies were prolonged in the difficult than in the easy task. This effect was more pronounced for Nogo than for Go trials. The Nogo-P3 amplitude was smaller in Noise than in "Quiet" conditions in the difficult task only. In the difficult task, the Nogo-P3 latency was prolonged in bad sleepers than in good sleepers. The Nogo-P3 amplitude was reduced in Noise as compared to "Quiet" conditions in bad sleepers only. Sleep quality in bad sleepers worsened steadily with increasing noise levels. No effects of noise or subjective sleep quality on performance were found. Inhibitory processes appear to be selectively impaired after nocturnal noise exposure. The task difficulty and perceived sleep quality are important factors modulating noise effects. The results suggest that nocturnal traffic noise increase physiological costs for inhibitory functioning on the day even if no overt performance decrement is observed.

Characteristics and origin of the relatively high-quality tight reservoir in the Silurian Xiaoheba Formation in the southeastern Sichuan Basin

PubMed Central

Gong, Xiaoxing; Shi, Zejin; Wang, Yong; Tian, Yaming; Li, Wenjie; Liu, Lei

2017-01-01

A mature understanding of the sandstone gas reservoir in the Xiaoheba Formation in the southeastern Sichuan Basin remains lacking. To assess the reservoir characteristics and the origin of the high-quality reservoir in the Xiaoheba Formation, this paper uses systematic field investigations, physical property analysis, thin section identification, scanning electron microscopy and electron microprobe methods. The results indicate that the Xiaoheba sandstone is an ultra-tight and ultra-low permeability reservoir, with an average porosity of 2.97% and an average permeability of 0.56×10−3 μm2. This promising reservoir is mainly distributed in the Lengshuixi and Shuangliuba regions and the latter has a relatively high-quality reservoir with an average porosity of 5.28% and average permeability of 0.53×10−3 μm2. The reservoir space comprises secondary intergranular dissolved pores, moldic pores and fractures. Microfacies, feldspar dissolution and fracture connectivity control the quality of this reservoir. The relatively weak compaction and cementation in the interbedded delta front distal bar and interdistributary bay microfacies indirectly protected the primary intergranular pores and enhanced late-stage dissolution. Late-stage potassium feldspar dissolution was controlled by the early-stage organic acid dissolution intensity and the distance from the hydrocarbon generation center. Early-stage fractures acted as pathways for organic acid migration and were therefore important factors in the formation of the reservoir. Based on these observations, the area to the west of the Shuangliuba and Lengshuixi regions has potential for gas exploration. PMID:28686735

Reliability and Validity of a Survey to Measure Bowel Function and Quality of Life in Long-term Rectal Cancer Survivors

PubMed Central

Wendel, Christopher S.; Grant, Marcia; Herrinton, Lisa; Temple, Larissa K. F.; Hornbrook, Mark C.; McMullen, Carmit K.; Bulkley, Joanna E.; Altschuler, Andrea; Krouse, Robert S.

2014-01-01

Purpose Examine reliability and validity of a specialized health-related quality of life questionnaire for rectal cancer (RC) survivors (≥5 years post diagnosis). Methods We mailed 1,063 Kaiser Permanente (KP) RC survivors (313 ostomy, 750 anastomosis) a questionnaire containing the Modified City of Hope Quality of Life-Ostomy (mCOH-QOL-O), SF-12v2, Duke–UNC Functional Social Support Questionnaire (FSSQ), and Memorial Sloan-Kettering Cancer Center Bowel Function Index (BFI). We adapted certain BFI items for use by subjects with intestinal ostomies. We evaluated reliability for all instruments with inter-item correlations and Cronbach’s alpha. We assessed construct validity only for the BFI in the ostomy group, because such use has not been reported. Results The overall response rate was 60.5% (577 respondents/953 eligible). Compared to nonresponders, participants were on average 2 years younger and more likely non-Hispanic white, resided in educationally nondeprived areas, and had KP membership through a group. The mCOH-QOL-O, SF-12, and FSSQ were found to be highly reliable for RC survivors. In the ostomy group, BFI Urgency/Soilage and Dietary subscales were found to be reliable, but Frequency was not. Factor analysis supported the construct of Urgency/Soilage and Dietary subscales in the ostomy group, although one item had a moderate correlation with all three factors. The BFI also demonstrated good concurrent validity with other instruments in the ostomy group. Conclusions With possible exception of the BFI Frequency subscale in populations with ostomies, components of our survey can be used for the entire population of RC survivors, no matter whether they received anastomosis or ostomy. PMID:24890826

Reliability and validity of a survey to measure bowel function and quality of life in long-term rectal cancer survivors.

PubMed

Wendel, Christopher S; Grant, Marcia; Herrinton, Lisa; Temple, Larissa K F; Hornbrook, Mark C; McMullen, Carmit K; Bulkley, Joanna E; Altschuler, Andrea; Krouse, Robert S

2014-12-01

Examination of reliability and validity of a specialized health-related quality of life questionnaire for rectal cancer (RC) survivors (≥5 years post-diagnosis). We mailed 1,063 Kaiser Permanente (KP) RC survivors (313 ostomy and 750 anastomosis) a questionnaire containing the Modified City of Hope Quality of Life-Ostomy (mCOH-QOL-O), SF-12v2, Duke-UNC Functional Social Support Questionnaire (FSSQ), and Memorial Sloan-Kettering Cancer Center Bowel Function Index (BFI). We adapted certain BFI items for use by subjects with intestinal ostomies. We evaluated reliability for all instruments with inter-item correlations and Cronbach's alpha. We assessed construct validity only for the BFI in the ostomy group, because such use has not been reported. The overall response rate was 60.5 % (577 respondents/953 eligible). Compared with non-responders, participants were on average 2 years younger and more likely non-Hispanic white, resided in educationally non-deprived areas, and had KP membership through a group. The mCOH-QOL-O, SF-12, and FSSQ were found to be highly reliable for RC survivors. In the ostomy group, BFI Urgency/Soilage and Dietary subscales were found to be reliable, but Frequency was not. Factor analysis supported the construct of Urgency/Soilage and Dietary subscales in the ostomy group, although one item had a moderate correlation with all three factors. The BFI also demonstrated good concurrent validity with other instruments in the ostomy group. With possible exception of the BFI Frequency subscale in populations with ostomies, components of our survey can be used for the entire population of RC survivors, no matter whether they received anastomosis or ostomy.

High-power actively Q-switched single-mode 1342 nm Nd:YVO₄ ring laser, injection-locked by a cw single-frequency microchip laser.

PubMed

Koch, Peter; Bartschke, Juergen; L'huillier, Johannes A

2015-11-30

In this paper we report on the realization of a single-mode Q-switched Nd:YVO₄ ring laser at 1342 nm. Unidirectional and single-mode operation of the ring laser is achieved by injection-locking with a continuous wave Nd:YVO₄ microchip laser, emitting a single-frequency power of up to 40 mW. The ring laser provides a single-mode power of 13.9 W at 10 kHz pulse repetition frequency with a pulse duration of 18.2 ns and an excellent beam quality (M² < 1.05). By frequency doubling of the fundamental 1342 nm laser, a power of 8.7 W at 671 nm with a pulse duration of 14.8 ns and a beam propagation factor of M² < 1.1 is obtained. The 671 nm radiation features a long-term spectral width of 75 MHz.

1.9 W continuous-wave single transverse mode emission from 1060 nm edge-emitting lasers with vertically extended lasing area

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miah, M. J., E-mail: jarez.miah@tu-berlin.de; Posilovic, K.; Kalosha, V. P.

2014-10-13

High-brightness edge-emitting semiconductor lasers having a vertically extended waveguide structure emitting in the 1060 nm range are investigated. Ridge waveguide (RW) lasers with 9 μm stripe width and 2.64 mm cavity length yield highest to date single transverse mode output power for RW lasers in the 1060 nm range. The lasers provide 1.9 W single transverse mode optical power under continuous-wave (cw) operation with narrow beam divergences of 9° in lateral and 14° (full width at half maximum) in vertical direction. The beam quality factor M{sup 2} is less than 1.9 up to 1.9 W optical power. A maximum brightness of 72 MWcm{sup −2}sr{supmore » −1} is obtained. 100 μm wide and 3 mm long unpassivated broad area lasers provide more than 9 W optical power in cw operation.« less

Effect of low temperature baking in nitrogen on the performance of a niobium superconducting radio frequency cavity

DOE PAGES

Dhakal, Pashupati; Chetri, Santosh; Balachandran, Shreyas; ...

2018-03-08

Here, we report the rf performance of a single-cell superconducting radiofrequency cavity after low temperature baking in a nitrogen environment. A significant increase in quality factor has been observed when the cavity was heat treated in the temperature range of 120-160 °C with a nitrogen partial pressure of ~25 mTorr. This increase in quality factor as well as the Q-rise phenomenon (anti-Q-slope) is similar to those previously obtained with high temperature nitrogen doping as well as titanium doping. In this study, a cavity N 2-treated at 120 °C and at 140 °C, showed no degradation in accelerating gradient, however themore » accelerating gradient was reduced by ~25% with a 160 °C N 2 treatment, compared to the baseline tests after electropolishing. Sample coupons treated in the same conditions as the cavity were analyzed by scanning electron microscope, x-ray photoelectron spectroscopy and secondary ion mass spectroscopy revealed a complex surface composition of Nb 2O 5, NbO and NbN (1-x)O x within the rf penetration depth. Furthermore, magnetization measurements showed no significant change on bulk superconducting properties.« less

Effect of low temperature baking in nitrogen on the performance of a niobium superconducting radio frequency cavity

NASA Astrophysics Data System (ADS)

Dhakal, Pashupati; Chetri, Santosh; Balachandran, Shreyas; Lee, Peter J.; Ciovati, Gianluigi

2018-03-01

We report the rf performance of a single cell superconducting radiofrequency cavity after low temperature baking in a nitrogen environment. A significant increase in quality factor has been observed when the cavity was heat treated in the temperature range of 120 - 160 °C with a nitrogen partial pressure of ˜25 m Torr . This increase in quality factor as well as the Q -rise phenomenon (anti-Q -slope) is similar to those previously obtained with high temperature nitrogen doping as well as titanium doping. In this study, a cavity N2 -treated at 120 °C and at 140 °C showed no degradation in accelerating gradient, however the accelerating gradient was reduced by ˜25 % with a 160 °C N2 treatment, compared to the baseline tests after electropolishing. Sample coupons treated in the same conditions as the cavity were analyzed by scanning electron microscope, x-ray photoelectron spectroscopy and secondary ion mass spectroscopy revealed a complex surface composition of Nb2O5 , NbO and NbN(1 -x )Ox within the rf penetration depth. Furthermore, magnetization measurements showed no significant change on bulk superconducting properties.

Effect of low temperature baking in nitrogen on the performance of a niobium superconducting radio frequency cavity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dhakal, Pashupati; Chetri, Santosh; Balachandran, Shreyas

Here, we report the rf performance of a single-cell superconducting radiofrequency cavity after low temperature baking in a nitrogen environment. A significant increase in quality factor has been observed when the cavity was heat treated in the temperature range of 120-160 °C with a nitrogen partial pressure of ~25 mTorr. This increase in quality factor as well as the Q-rise phenomenon (anti-Q-slope) is similar to those previously obtained with high temperature nitrogen doping as well as titanium doping. In this study, a cavity N 2-treated at 120 °C and at 140 °C, showed no degradation in accelerating gradient, however themore » accelerating gradient was reduced by ~25% with a 160 °C N 2 treatment, compared to the baseline tests after electropolishing. Sample coupons treated in the same conditions as the cavity were analyzed by scanning electron microscope, x-ray photoelectron spectroscopy and secondary ion mass spectroscopy revealed a complex surface composition of Nb 2O 5, NbO and NbN (1-x)O x within the rf penetration depth. Furthermore, magnetization measurements showed no significant change on bulk superconducting properties.« less

7.5 W blue light generation at 452 nm by internal frequency doubling of a continuous-wave Nd-doped fiber laser.

PubMed

Leconte, Baptiste; Gilles, Hervé; Robin, Thierry; Cadier, Benoit; Laroche, Mathieu

2018-04-16

We present the first frequency-doubled neodymium-doped fiber laser generating multi-watt CW power near 450 nm. A bow-tie resonator incorporating a LBO nonlinear crystal is integrated within a Nd-doped fiber laser emitting near 900 nm. This scheme achieves an IR to blue conversion efficiency close to 55% without any active control of the internal resonant cavity. As a result, up to 7.5 W of linearly-polarized blue power is generated, with beam quality factors M x 2 ~1.0 and M y 2 ~1.5. A simple numerical model has been developed to optimize and analyse the IR to blue conversion efficiency in the resonant cavity. Performance limitations and prospects for further improvements are discussed.

A longitudinal cohort study examining determinants of overweight and obesity in adulthood.

PubMed

Barakat-Haddad, Caroline; Saeed, Usman; Elliott, Susan

2017-04-20

Adulthood overweight and obesity are multifaceted conditions influenced by a combination of biological, environmental and socio-cultural factors across the lifespan. Using a longitudinal study design, we aimed to identify determinants of adulthood overweight and obesity, in relation to: 1) childhood and life course factors, 2) geographical differences in air quality, and 3) gender-specific factors, in a cohort followed from childhood into adulthood. Childhood data were acquired (1978-1986) from children residing in four distinct Hamilton neighbourhoods (Ontario, Canada), including air-quality assessments. Adulthood data were obtained (2006-2007) from successfully retraced participants (n = 315) using comprehensive self-administered questionnaires. Multivariate logistic regressions were used to evaluate determinants of adulthood overweight (BMI: 25-29.9 kg/m2) and obesity (BMI: ≥30). The prevalence of normal weight decreased drastically at follow-up in adulthood, while that of overweight and obesity increased. Both overweight and obesity in adulthood were associated with male gender and occupational exposures to contaminants. Childhood residence in Hamilton neighbourhoods with better air quality was associated with lesser odds of adulthood overweight, whereas adulthood obesity was strongly linked to childhood weight gain (overweight or obesity). Among females, childhood weight status predicted overweight and obesity in adulthood, with always living in Hamilton, lack of additional health insurance, negative self-appraisal and high blood pressure during adulthood identified as other significant predictors. Among males, prolonged occupational exposures to contaminants emerged as a unique determinant of adulthood weight gain. Adulthood overweight and obesity are associated with childhood and life course determinants, including childhood weight status, residential air quality and occupational contaminant exposures, in a gender-specific manner.

Psychosocial aspect of quality of life among working and unemployed nurses and midwives.

PubMed

Czekirda, Marta; Chruściel, Paweł; Czekirda, Neomi; Jarosz, Mirosław J

2017-09-21

The objective of the study was to explain differences in the subjective evaluation of the psychological and social aspects of quality of life in a group of working and unemployed nurses and midwives. The survey was conducted in a group of 620 professionally-active and inactive people (315 nurses and 305 midwives), selected by random stratified-systematic sampling. The tool used to gather empirical material was the standardized questionnaire WHOQoL-100. Professionally-active nurses evaluated the mental domain less favourably (M=12.33), compared with unemployed nurses (M=12.73), and the difference between average values was statistically significant (p=.043). It is also worth noting that in the group of midwives there were significant differences in each discussed domain. The unemployed respondents evaluated more positively the overall quality of life (M=14.29; p=.005) and the mental domain (M=12.85; p=.009), while the social domain was evaluated less favourably by the professionally-active midwives (M=12.73; p=.022). Paradoxically, those who were unemployed made slightly more positive evaluations in comparison with the professionally active. Professional work is not a factor preferably affecting the quality of life and its psychosocial dimension. The higher quality of life of the unemployed respondents may result from the buffering impact of social support.

Predicting quality of life in pediatric asthma: the role of emotional competence and personality.

PubMed

Lahaye, Magali; Van Broeck, Nady; Bodart, Eddy; Luminet, Olivier

2013-05-01

The present study examined the predictive value of emotional competence and the five-factor model of personality on the quality of life of children with asthma. Participants were 90 children (M age = 11.73, SD = 2.60) having controlled and partly controlled asthma, undergoing everyday treatment. Children filled in questionnaires assessing emotional competence and quality of life. Parents completed questionnaires assessing the personality of their child. Results showed that two emotional competences, bodily awareness and verbal sharing of emotions, were related to the quality of life of children with asthma. Moreover, one personality trait, benevolence, was associated with children's quality of life. Regression analyses showed that the predictive value of these three dimensions remained significant over and above asthma control and socio-demographic variables frequently associated with the quality of life of children with asthma (age, gender, and educational level of parents). These findings emphasize the importance of alerting the clinician who works with children with asthma to observe and assess the child's expression of emotions, attention to bodily sensations, and benevolence.

Leveraging Structural Characteristics of Interdependent Networks to Model Non-linear Cascading Characteristics

DTIC Science & Technology

2015-06-29

17.476 237.18 17.5 237.2 91.64216359 6.752418 -20- References Asuncion, A., Welling, M., Smyth, P., & Teh , P. Y. ( 2009 ). On Smoothing and inference...networks of interdependent programs [Lewin 1999, Flowe et al., 2009 ]. Also, the acquisition paradigm established in statute 10 U.S.C. 2434, policy...results. Number of topics (k) for input data: Quality of results of modeling can be measured using a factor called perplexity (Asuncion et al. 2009

Effect of Atomic Layer Deposition on the Quality Factor of Silicon Nanobeam Cavities

DTIC Science & Technology

2012-01-25

Additionally, tuning of 2D photonic crystal systems has been shown using atomic layer deposition (ALD) of hafnium oxide [5] and titanium oxide [6] and plasma...μm. This region of the fiber is then carefully positioned across the nanobeam cavity. A tunable narrowband laser source is coupled into one end of the...fiber, and the trans- mitted power is detected at the other end. As the laser source is tuned into resonance with the cavity, some of the power is

PLÉIADES Project: Assessment of Georeferencing Accuracy, Image Quality, Pansharpening Performence and Dsm/dtm Quality

NASA Astrophysics Data System (ADS)

Topan, Hüseyin; Cam, Ali; Özendi, Mustafa; Oruç, Murat; Jacobsen, Karsten; Taşkanat, Talha

2016-06-01

Pléiades 1A and 1B are twin optical satellites of Optical and Radar Federated Earth Observation (ORFEO) program jointly running by France and Italy. They are the first satellites of Europe with sub-meter resolution. Airbus DS (formerly Astrium Geo) runs a MyGIC (formerly Pléiades Users Group) program to validate Pléiades images worldwide for various application purposes. The authors conduct three projects, one is within this program, the second is supported by BEU Scientific Research Project Program, and the third is supported by TÜBİTAK. Assessment of georeferencing accuracy, image quality, pansharpening performance and Digital Surface Model/Digital Terrain Model (DSM/DTM) quality subjects are investigated in these projects. For these purposes, triplet panchromatic (50 cm Ground Sampling Distance (GSD)) and VNIR (2 m GSD) Pléiades 1A images were investigated over Zonguldak test site (Turkey) which is urbanised, mountainous and covered by dense forest. The georeferencing accuracy was estimated with a standard deviation in X and Y (SX, SY) in the range of 0.45m by bias corrected Rational Polynomial Coefficient (RPC) orientation, using ~170 Ground Control Points (GCPs). 3D standard deviation of ±0.44m in X, ±0.51m in Y, and ±1.82m in Z directions have been reached in spite of the very narrow angle of convergence by bias corrected RPC orientation. The image quality was also investigated with respect to effective resolution, Signal to Noise Ratio (SNR) and blur coefficient. The effective resolution was estimated with factor slightly below 1.0, meaning that the image quality corresponds to the nominal resolution of 50cm. The blur coefficients were achieved between 0.39-0.46 for triplet panchromatic images, indicating a satisfying image quality. SNR is in the range of other comparable space borne images which may be caused by de-noising of Pléiades images. The pansharpened images were generated by various methods, and are validated by most common statistical metrics and also visual interpretation. The generated DSM and DTM were achieved with ±1.6m standard deviation in Z (SZ) in relation to a reference DTM.

High-power narrow-linewidth quasi-CW diode-pumped TEM00 1064 nm Nd:YAG ring laser.

PubMed

Liu, Yuan; Wang, Bao-shan; Xie, Shi-yong; Bo, Yong; Wang, Peng-yuan; Zuo, Jun-wei; Xu, Yi-ting; Xu, Jia-lin; Peng, Qin-jun; Cui, Da-fu; Xu, Zu-yan

2012-04-01

We demonstrated a high average power, narrow-linewidth, quasi-CW diode-pumped Nd:YAG 1064 nm laser with near-diffraction-limited beam quality. A symmetrical three-mirror ring cavity with unidirectional operation elements and an etalon was employed to realize the narrow-linewidth laser output. Two highly efficient laser modules and a 90° quartz rotator for birefringence compensation were used for the high output power. The maximum average output power of 62.5 W with the beam quality factor M(2) of 1.15 was achieved under a pump power of 216 W at a repetition rate of 500 Hz, corresponding to the optical-to-optical conversion efficiency of 28.9%. The linewidth of the laser at the maximum output power was measured to be less than 0.2 GHz.

Development of solar concentrators for high-power solar-pumped lasers.

PubMed

Dinh, T H; Ohkubo, T; Yabe, T

2014-04-20

We have developed unique solar concentrators for solar-pumped solid-state lasers to improve both efficiency and laser output power. Natural sunlight is collected by a primary concentrator which is a 2  m×2  m Fresnel lens, and confined by a cone-shaped hybrid concentrator. Such solar power is coupled to a laser rod by a cylinder with coolant surrounding it that is called a liquid light-guide lens (LLGL). Performance of the cylindrical LLGL has been characterized analytically and experimentally. Since a 14 mm diameter LLGL generates efficient and uniform pumping along a Nd:YAG rod that is 6 mm in diameter and 100 mm in length, 120 W cw laser output is achieved with beam quality factor M2 of 137 and overall slope efficiency of 4.3%. The collection efficiency is 30.0  W/m2, which is 1.5 times larger than the previous record. The overall conversion efficiency is more than 3.2%, which can be comparable to a commercial lamp-pumped solid-state laser. The concept of the light-guide lens can be applied for concentrator photovoltaics or other solar energy optics.

Performance evaluation of the CT component of the IRIS PET/CT preclinical tomograph

NASA Astrophysics Data System (ADS)

Panetta, Daniele; Belcari, Nicola; Tripodi, Maria; Burchielli, Silvia; Salvadori, Piero A.; Del Guerra, Alberto

2016-01-01

In this paper, we evaluate the physical performance of the CT component of the IRIS scanner, a novel combined PET/CT scanner for preclinical imaging. The performance assessment is based on phantom measurement for the determination of image quality parameters (spatial resolution, linearity, geometric accuracy, contrast to noise ratio) and reproducibility in dynamic (4D) imaging. The CTDI100 has been measured free in air with a pencil ionization chamber, and the animal dose was calculated using Monte Carlo derived conversion factors taken from the literature. The spatial resolution at the highest quality protocol was 6.9 lp/mm at 10% of the MTF, using the smallest reconstruction voxel size of 58.8 μm. The accuracy of the reconstruction voxel size was within 0.1%. The linearity of the CT numbers as a function of the concentration of iodine was very good, with R2>0.996 for all the tube voltages. The animal dose depended strongly on the scanning protocol, ranging from 158 mGy for the highest quality protocol (2 min, 80 kV) to about 12 mGy for the fastest protocol (7.3 s, 80 kV). In 4D dynamic modality, the maximum scanning rate reached was 3.1 frames per minute, using a short-scan protocol with 7.3 s of scan time per frame at the isotropic voxel size of 235 μm. The reproducibility of the system was high throughout the 10 frames acquired in dynamic modality, with a standard deviation of the CT values of all frames <8 HU and an average spatial reproducibility within 30% of the voxel size across all the field of view. Example images obtained during animal experiments are also shown.

Beach boundary layer: a framework for addressing recreational water quality impairment at enclosed beaches.

PubMed

Grant, Stanley B; Sanders, Brett F

2010-12-01

Nearshore waters in bays, harbors, and estuaries are frequently contaminated with human pathogens and fecal indicator bacteria. Tracking down and mitigating this contamination is complicated by the many point and nonpoint sources of fecal pollution that can degrade water quality along the shore. From a survey of the published literature, we propose a conceptual and mathematical framework, the "beach boundary layer model", for understanding and quantifying the relative impact of beach-side and bay-side sources of fecal pollution on nearshore water quality. In the model, bacterial concentration in ankle depth water C(ankle) [bacteria L(-3)] depends on the flux m'' [bacteria L(-2) T(-1)] of fecal bacteria from beach-side sources (bather shedding, bird and dog feces, tidal washing of sediments, decaying vegetation, runoff from small drains, and shallow groundwater discharge), a cross-shore mass transfer velocity k [L T(-1)] that accounts for the physics of nearshore transport and mixing, and a background concentration C(bay) [bacteria L(-3)] attributable to bay-side sources of pollution that impact water quality over large regions (sewage outfalls, creeks and rivers): C(ankle) = m''/k + C(bay). We demonstrate the utility of the model for identifying risk factors and pollution sources likely to impact shoreline water quality, and evaluate the model's underlying assumptions using computational fluid dynamic simulations of flow, turbulence, and mass transport in a trapezoidal channel.

A universally calibrated microplate ferric reducing antioxidant power (FRAP) assay for foods and applications to Manuka honey.

PubMed

Bolanos de la Torre, Amparo Angelica S; Henderson, Terence; Nigam, Poonam Singh; Owusu-Apenten, Richard K

2015-05-01

The ferric reducing antioxidant power (FRAP) assay was recently adapted to a microplate format. However, microplate-based FRAP (mFRAP) assays are affected by sample volume and composition. This work describes a calibration process for mFRAP assays which yields data free of volume effects. From the results, the molar absorptivity (ε) for the mFRAP assay was 141,698 M(-1) cm(-1) for gallic acid, 49,328 M(-1) cm(-1) for ascorbic acid, and 21,606 M(-1) cm(-1) for ammonium ferrous sulphate. The significance of ε (M(-1) cm(-1)) is discussed in relation to mFRAP assay sensitivity, minimum detectable concentration, and the dimensionless FRAP-value. Gallic acid showed 6.6 mol of Fe(2+) equivalents compared to 2.3 mol of Fe(+2) equivalents for ascorbic acid. Application of the mFRAP assay to Manuka honey samples (rated 5+, 10+, 15+, and 18+ Unique Manuka Factor; UMF) showed that FRAP values (0.54-0.76 mmol Fe(2+) per 100g honey) were strongly correlated with UMF ratings (R(2)=0.977) and total phenols content (R(2) = 0.982)whilst the UMF rating was correlated with the total phenols (R(2) = 0.999). In conclusion, mFRAP assay results were successfully standardised to yield data corresponding to 1-cm spectrophotometer which is useful for quality assurance purposes. The antioxidant capacity of Manuka honey was found to be directly related to the UMF rating. Copyright © 2014 Elsevier Ltd. All rights reserved.

Heating with Biomass in the United Kingdom: Lessons from New Zealand

NASA Astrophysics Data System (ADS)

Mitchell, E. J. S.; Coulson, G.; Butt, E. W.; Forster, P. M.; Jones, J. M.; Williams, A.

2017-03-01

In this study we review the current status of residential solid fuel (RSF) use in the UK and compare it with New Zealand, which has had severe wintertime air quality issues for many years that is directly attributable to domestic wood burning in heating stoves. Results showed that RSF contributed to more than 40 μg m-3 PM10 and 10 μg m-3 BC in some suburban locations of New Zealand in 2006, with significant air quality and climate impacts. Models predict RSF consumption in New Zealand to decrease slightly from 7 PJ to 6 PJ between 1990 and 2030, whereas consumption in the UK increases by a factor of 14. Emissions are highest from heating stoves and fireplaces, and their calculated contribution to radiative forcing in the UK increases by 23% between 2010 and 2030, with black carbon accounting for more than three quarters of the total warming effect. By 2030, the residential sector accounts for 44% of total BC emissions in the UK and far exceeds emissions from the traffic sector. Finally, a unique bottom-up emissions inventory was produced for both countries using the latest national survey and census data for the year 2013/14. Fuel- and technology-specific emissions factors were compared between multiple inventories including GAINS, the IPCC, the EMEP/EEA and the NAEI. In the UK, it was found that wood consumption in stoves was within 30% of the GAINS inventory, but consumption in fireplaces was substantially higher and fossil fuel consumption is more than twice the GAINS estimate. As a result, emissions were generally a factor of 2-3 higher for biomass and 2-6 higher for coal. In New Zealand, coal and lignite consumption in stoves is within 24% of the GAINS inventory estimate, but wood consumption is more than 7 times the GAINS estimate. As a result, emissions were generally a factor of 1-2 higher for coal and several times higher for wood. The results of this study indicate that emissions from residential heating stoves and fireplaces may be underestimated in climate models. Emissions are increasing rapidly in the UK which may result in severe wintertime air quality reductions, as seen in New Zealand, and contribute to climate warming unless controls are implemented such as the Ecodesign emissions limits.

Survey of bovine colostrum quality and hygiene on northern Victorian dairy farms.

PubMed

Phipps, A J; Beggs, D S; Murray, A J; Mansell, P D; Stevenson, M A; Pyman, M F

2016-11-01

One of the major challenges for dairy producers is to produce, harvest, and store high-quality colostrum and feed it to their replacement heifer calves. Limited published data are available in Australia regarding the relationship between colostrum management, hygiene, and quality. The objectives of this study were to investigate (1) the colostrum storage and handling practices carried out on farm; (2) the immunoglobulin concentration and bacterial composition of colostrum being fed to replacement dairy heifer calves; (3) the percentage of colostrum being fed to replacement dairy heifer calves that meet industry recommendations; and (4) risk factors for bacterial contamination of colostrum. The study was carried out on 24 dairy farms located near Rochester, Victoria, Australia. Two hundred forty colostrum samples were collected (10 samples per farm). Each farm harvested and stored first-milking colostrum under normal farm conditions. A 10-mL sample of the colostrum was collected in a sterile container immediately before feeding, and a Brix refractometer reading was taken. The samples were then frozen at -4°C and submitted for bacterial concentration analysis. Fifty-eight percent of colostrum samples met the recommended industry standard of a total plate count (TPC) of <100,000cfu/mL, and 94% of colostrum samples met the recommended industry standard of total coliform count (TCC) of 10,000cfu/mL. However, when all the current industry recommendations for TPC, TCC, and Brix refractometer percentage for colostrum quality were considered, only 23% of the samples met all standards. These findings demonstrate that a large number of calves were at risk of receiving colostrum of poor quality, with high bacterial loads that may have interfered with the acquisition of transfer of passive immunity and affected calf health. Further investigation is required to identify the farm-specific factors that may influence the level of bacterial contamination of colostrum. Recommendations as a result of this study include refrigeration of excess colostrum shortly (within 1h) after collection and thorough disinfection of the calf feeding apparatus before use. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

L-carnitine is a survival factor for chilled storage of rooster semen for a long time.

PubMed

Fattah, A; Sharafi, M; Masoudi, R; Shahverdi, A; Esmaeili, V

2017-02-01

Rooster sperm is sensitive to cooling, which restricts procedures to store sperms for extended periods of time for artificial insemination of commercial flocks. This study was conducted to evaluate the suitability of adding L-carnitine (LC) to chilled-storage of rooster sperm and its effects on sperm quality parameters and its fertility potential during storage at 5 °C. Pooled semen from roosters were divided into six equal aliquots and diluted with media supplemented with different concentrations of LC (0, 0.5, 1, 2, 4 and 8 mM LC). Diluted semen samples were cooled to 5 °C and stored over 48 h. Motility, viability, membrane functionality, lipid peroxidation and mitochondria activity of the sperm were assessed at 0, 24 and 48 h of storage. Moreover, fertility potential of chilled stored sperm was considered at 24 h of storage. While sperm quality was not affected by LC at the beginning of storage (0 h), supplementation of extender with 1 and 2 mM of LC significantly improved the percentage of sperm motility, viability, membrane integrity and mitochondria activity at 24 h and 48 h compared to other groups. Lipid peroxidation was significantly reduced in sperm samples diluted with 1 and 2 mM LC at 24 h (2.15 ± 0.52 nmol/ml and 2.21 ± 0.52 nmol/ml) and 48 h (3.42 ± 0.49 nmol/ml and 3.38 ± 0.49 nmol/ml) compared to other groups. Furthermore, fertility rates during artificial insemination using sperms cooled for 24 h in the presence of 1 and 2 mM LC were significantly higher (78%) than in the control group (64%). These findings suggest that optimum doses of LC could protect rooster sperm against cool storage-induced functional and structural damages. Copyright © 2016 Elsevier Inc. All rights reserved.

Potential impact of a US climate policy and air quality regulations on future air quality and climate change

NASA Astrophysics Data System (ADS)

Lee, Y. H.; Shindell, D. T.; Faluvegi, G.; Pinder, R. W.

2015-11-01

We have investigated how future air quality and climate change are influenced by the US air quality regulations that existed or were proposed in 2013 and a hypothetical climate mitigation policy that reduces 2050 CO2 emissions to be 50 % below 2005 emissions. Using NASA GISS ModelE2, we look at the impacts in year 2030 and 2055. The US energy-sector emissions are from the GLIMPSE project (GEOS-Chem LIDORT Integrated with MARKAL for the Purpose of Scenario Exploration), and other US emissions and the rest of the world emissions are based on the RCP4.5 scenario. The US air quality regulations are projected to have a strong beneficial impact on US air quality and public health in the future but result in positive radiative forcing. Surface PM2.5 is reduced by ~ 2 μg m-3 on average over the US, and surface ozone by ~ 8 ppbv. The improved air quality prevents about 91 400 premature deaths in the US, mainly due to the PM2.5 reduction (~ 74 200 lives saved). The air quality regulations reduces the light-reflecting aerosols (i.e., sulfate and organic matter) more than the light-absorbing species (i.e., black carbon and ozone), leading a strong positive radiative forcing (RF) by both aerosols direct and indirect forcing: total RF is ~ 0.04 W m-2 over the globe; ~ 0.8 W m-2 over the US. Under the hypothetical climate policy, future US energy relies less on coal and thus SO2 emissions are noticeably reduced. This provides air quality co-benefits, but it leads to climate dis-benefits over the US. In 2055, the US mean total RF is +0.22 W m-2 due to positive aerosol direct and indirect forcing, while the global mean total RF is -0.06 W m-2 due to the dominant negative CO2 RF (instantaneous RF). To achieve a regional-scale climate benefit via a climate policy, it is critical (1) to have multi-national efforts to reduce GHGs emissions and (2) to target emission reduction of light-absorbing species (e.g., BC and O3) on top of long-lived species. The latter is very desirable as the resulting climate benefit occurs faster and provides co-benefits to air quality and public health.

Seasonal-Spatial Distribution and Long-Term Variation of Transparency in Xin'anjiang Reservoir: Implications for Reservoir Management.

PubMed

Wu, Zhixu; Zhang, Yunlin; Zhou, Yongqiang; Liu, Mingliang; Shi, Kun; Yu, Zuoming

2015-08-12

Water transparency is a useful indicator of water quality or productivity and is widely used to detect long-term changes in the water quality and eutrophication of lake ecosystems. Based on short-term spatial observations in the spring, summer, and winter and on long-term site-specific observation from 1988 to 2013, the spatial, seasonal, long-term variations, and the factors affecting transparency are presented for Xin'anjiang Reservoir (China). Spatially, transparency was high in the open water but low in the bays and the inflowing river mouths, reflecting the effect of river runoff. The seasonal effects were distinct, with lower values in the summer than in the winter, most likely due to river runoff and phytoplankton biomass increases. The transparency decreased significantly with a linear slope of 0.079 m/year, indicating a 2.05 m decrease and a marked decrease in water quality. A marked increase occurred in chlorophyll a (Chla) concentration, and a significant correlation was found between the transparency and Chla concentration, indicating that phytoplankton biomass can partially explain the long-term trend of transparency in Xin'anjiang Reservoir. The river input and phytoplankton biomass increase were associated with soil erosion and nutrient loss in the catchment. Our study will support future management of water quality in Xin'anjiang Reservoir.

The Characteristics of Atmospheric Phthalates in Shanghai: a Haze Case Study

NASA Astrophysics Data System (ADS)

Li, Y.; Wang, J.; Ren, B.; Wang, H.; Qiao, L.; Zhu, J.; Li, L.

2017-12-01

While phthalates in indoor environments are extensively studied, reports on phthalates in outdoor air, particularly their associations with haze events are rare. Phthalates, especially dimethyl phthalate, are known to react with criteria air pollutants contributing to the formation of secondary organic aerosols. This study investigated phthalates levels in outdoor air in Shanghai with a focus on their associations with different air quality conditions. The air quality during the study period was classified into three levels: non-haze, light pollution and moderate pollution based on the Air Quality Index. Phthalates levels were found to be lower in non haze (236 ng/m3) and higher in moderate pollution weather (up to 700 ng/m3). Meteorological factors of relative humidity and wind speed had an inverse relationship with phthalates levels. Airborne particulate matter had a positive correlation with phthalates levels. Hydroxyl radical initiated photo-reaction of dimethyl phthalate was observed through its inverse relationship with total atmospheric oxidant (O3 + NO2), indicating that dimethyl phthalate could be one of the precursors of secondary organic aerosol causing haze. This is the first study demonstrating the relationship of phthalates and different air quality conditions. The knowledge contributes to our understanding on the cause of haze events in China and elsewhere.

Spatial and temporal variations of water quality in an artificial urban river receiving WWTP effluent in South China.

PubMed

Zhang, Di; Tao, Yi; Liu, Xiaoning; Zhou, Kuiyu; Yuan, Zhenghao; Wu, Qianyuan; Zhang, Xihui

2016-01-01

Urban wastewater treatment plant (WWTP) effluent as reclaimed water provides an alternative water resource for urban rivers and effluent will pose a significant influence on the water quality of rivers. The objective of this study was to investigate the spatial and temporal variations of water quality in XZ River, an artificial urban river in Shenzhen city, Guangdong Province, China, after receiving reclaimed water from WWTP effluent. The water samples were collected monthly at different sites of XZ River from April 2013 to September 2014. Multivariate statistical techniques and a box-plot were used to assess the variations of water quality and to identify the main pollution factor. The results showed the input of WWTP effluent could effectively increase dissolved oxygen, decrease turbidity, phosphorus load and organic pollution load of XZ River. However, total nitrogen and nitrate pollution loads were found to remain at higher levels after receiving reclaimed water, which might aggravate eutrophication status of XZ River. Organic pollution load exhibited the lowest value on the 750 m downstream of XZ River, while turbidity and nutrient load showed the lowest values on the 2,300 m downstream. There was a higher load of nitrogen and phosphorus pollution in the dry season and at the beginning of wet season.

Laser and thermal properties of Nd:YGd2Sc2Al2GaO12 garnet ceramic Laser and thermal properties of Nd:YSGG garnet ceramic

NASA Astrophysics Data System (ADS)

Brenier, A.; Alombert-Goget, G.; Guyot, Y.; Boulon, G.

2012-10-01

The absorption and fluorescence properties of the Nd-doped YGd2Sc2Al2GaO12 mixed garnet ceramics have been measured at different temperatures. Under laser diode pumping an efficient laser emission has been demonstrated with 45% slope efficiency. The emission is constituted by two lines at 1058.6 and 1061.3 nm, subjected to a red shift and a variable relative intensity versus pump power. The role of the temperature has been investigated playing with the cavity parameters. The thermal conductivity of the 1% Nd-doped material has been determined (3.2 W/m/K) measuring the radial temperature distribution of the exit face of the sample including the axial heat flow in the analysis. The M2 beam quality factor and the dioptric power of the thermal lens have been investigated versus the pump power. The thermo-optic coefficient χ was determined as 44.4×10-6 K-1.

Independent risk factors for surgical site infection after cesarean delivery in a rural tertiary care medical center.

PubMed

Vallejo, Manuel C; Attaallah, Ahmed F; Shapiro, Robert E; Elzamzamy, Osama M; Mueller, Michael G; Eller, Warren S

2017-02-01

We aimed to determine the incidence of surgical site infection (SSI) after cesarean delivery (CD) and identify the risk factors in a rural population. We identified 218 SSI patients by International Classification of Disease codes and matched them with 3131 parturients (control) from the electronic record database in a time-matched retrospective quality assurance analysis. The incidence of SSI after CD was 7.0 %. Risk factors included higher body mass index (BMI) [40.30 ± 10.60 kg/m 2 SSI (95 % CI 38.73-41.87) vs 34.05 ± 8.24 kg/m 2 control (95 % CI 33.75-34.35, P < 0.001)], years of education [13.28 ± 2.44 years SSI (95 % CI 12.9-13.66) vs 14.07 ± 2.81 years control (95 % CI 13.96-14.18, P < 0.001)], number of prior births [2 (1-9) SSI vs 1 (1-11) control (P < 0.001)], tobacco use (OR 1.49; 95 % CI 1.06-2.09, P = 0.03), prior diagnosis of hypertension (OR 1.80; 95 % CI 1.34-2.42, P < 0.001), gestational diabetes (OR 1.59; 95 % CI 1.18-2.13, P = 0.003), and an emergency/STAT CD (OR 1.6; 95 % CI 1.1-2.3, P = 0.01). Risk factors for SSI after CD included higher BMI, less years of education, higher prior births, tobacco use, prior diagnosis of hypertension, gestational diabetes, and emergency/STAT CD. The presence of ruptured membranes was protective against SSI.

Highly stable, efficient Tm-doped fiber laser—a potential scalpel for low invasive surgery

NASA Astrophysics Data System (ADS)

Michalska, M.; Brojek, W.; Rybak, Z.; Sznelewski, P.; Mamajek, M.; Swiderski, J.

2016-11-01

We report an all-fiber, diode-pumped, continuous-wave Tm3+-doped fiber laser emitting 37.4 W of output power with a slope efficiency as high as 57% with respect to absorbed pump power at 790 nm. The laser operated at ~1.94 µm and the output beam quality factor M 2 was measured to be ~1.2. The output beam was very stable with power fluctuations  <1% measured over 1 h. The laser system is to be implemented as a scalpel for low-invasive soft-tissue surgery.

Factors affecting quality of life in adults with epilepsy in Taiwan: A cross-sectional, correlational study.

PubMed

Chen, Hsiu-Fang; Tsai, Yun-Fang; Hsi, Mo-Song; Chen, Jui-Chen

2016-05-01

The purpose of this study was to assess eight factors considered important for quality of life in persons with epilepsy in order to determine which of these components affect quality of life in adults with epilepsy in Taiwan. A cross-sectional, correlational study using structured questionnaires assessed 260 patients with epilepsy purposively sampled from a medical center in Northern Taiwan. Health-related quality of life (HRQoL) was evaluated with the Quality of Life in Epilepsy-31 (QOLIE-31) questionnaire. Data also included personal and health-related characteristics, knowledge of epilepsy, efficacy in the self-management of epilepsy, and social support. Scores for the QOLIE-31 were correlated with the following factors: (1) demographic characteristics of age, gender, and income; (2) sleep quality; (3) symptoms of anxiety and depression; (4) epilepsy-specific variables: seizure frequency; types, number, and frequency of antiepileptic drugs (AEDs); and adverse events of AEDs; and (5) social support. Stepwise regression analysis showed that seven factors were predictive for quality of life: anxiety, depression, adverse events of AEDs, social support, seizure frequency of at least once in three months, household income of NT$ 40,001-100,000, and male gender. These factors accounted for 58.2% of the variance of quality of life. Our study assessed multiple factors in an examination of relationships and predictive factors for quality of life in adults with epilepsy in Taiwan. Knowledge of these contributing factors can assist health-care providers when evaluating patients with epilepsy to help target interventions for improving quality of life. Copyright © 2016 Elsevier Inc. All rights reserved.

Biodiesel production potential of wastewater treatment high rate algal pond biomass.

PubMed

Mehrabadi, Abbas; Craggs, Rupert; Farid, Mohammed M

2016-12-01

This study investigates the year-round production potential and quality of biodiesel from wastewater treatment high rate algal pond (WWT HRAP) biomass and how it is affected by CO 2 addition to the culture. The mean monthly pond biomass and lipid productivities varied between 2.0±0.3 and 11.1±2.5gVSS/m 2 /d, and between 0.5±0.1 and 2.6±1.1g/m 2 /d, respectively. The biomass fatty acid methyl esters were highly complex which led to produce low-quality biodiesel so that it cannot be used directly as a transportation fuel. Overall, 0.9±0.1g/m 2 /d (3.2±0.5ton/ha/year) low-quality biodiesel could be produced from WWT HRAP biomass which could be further increased to 1.1±0.1g/m 2 /d (4.0ton/ha/year) by lowering culture pH to 6-7 during warm summer months. CO 2 addition, had little effect on both the biomass lipid content and profile and consequently did not change the quality of biodiesel. Copyright © 2016. Published by Elsevier Ltd.

Broiler performance, body weight variance, feed and water intake, and carcass quality at different stocking densities.

PubMed

Feddes, J J R; Emmanuel, E J; Zuidhoft, M J

2002-06-01

The effects of four stocking and water nipple densities on broiler performance and carcass traits were measured in two trials. The stocking densities of 23.8, 17.9, 14.3, and 11.9 birds/m2 corresponded to 260, 195, 156, and 130 birds per pen, respectively. The water nipple densities were 5, 10, 15, and 20 birds per water nipple. Birds in Trial 1 were processed at Day 39 and those in Trial 2 were processed at Day 42. Water and feed were provided ad libitum and light was provided 23 h/ d. Water nipple density had no effect on broiler performance or carcass quality. Birds grown at 23.8 birds/m2 had lower BW (1,898 g) and carcass weights (1,334 g), whereas birds grown at 14.3 birds/m2 had the highest BW (1,985 g) and carcass weights (1,432 g). Although the treatment with 23.8 birds/m2 gave the lowest BW, the yield of broilers per unit of floor space was highest (46.0 kg/m2). The coefficient of variation for BW was higher in the treatment with 11.9 birds/m2 (15.3 %) than in the other treatments (13.0%). The birds in the treatment with 11.9 birds/m2 consumed the least feed (2,993 g/bird) and those in the 14.3 birds/m2 treatment consumed the most feed (3,183 g/bird). The amount of water consumed and the water to feed ratio was highest in the 23.8 birds/m2 treatment (5,546 mL/bird and 1.85 mL/g, respectively). Stocking density had no effect on mortality, breast yield, carcass grading, incidence of scratches, or carcass quality. It was concluded high yield per unit area with good carcass quality could be achieved when ventilation rate and air circulation were adequate.

The impacts of reactive terpene emissions from plants on air quality in Las Vegas, Nevada

NASA Astrophysics Data System (ADS)

Papiez, Maria R.; Potosnak, Mark J.; Goliff, Wendy S.; Guenther, Alex B.; Matsunaga, Sou N.; Stockwell, William R.

A three-part study was conducted to quantify the impact of landscaped vegetation on air quality in a rapidly expanding urban area in the arid southeastern United States. The study combines in situ, plant-level measurements, a spatial emissions inventory, and a photochemical box model. Maximum plant-level basal emission rates were moderate: 18.1 μgC gdw -1 h -1 ( Washingtonia spp., palms) for isoprene and 9.56 μgC gdw -1 h -1 ( Fraxinus velutina, Arizona ash) for monoterpenes. Sesquiterpene emission rates were low for plant species selected in this study, with no measurement exceeding 0.1 μgC gdw -1 h -1. The high ambient temperatures combined with moderate plant-level emission factors resulted in landscape emission factors that were low (250-640 μgC m -2 h -1) compared to more mesic environments (e.g., the southeastern United States). The Regional Atmospheric Chemistry Mechanism (RACM) was modified to include a new reaction pathway for ocimene. Using measured concentrations of anthropogenic hydrocarbons and other reactive air pollutants (NO x, ozone), the box model employing the RACM mechanism revealed that these modest emissions could have a significant impact on air quality. For a suburban location that was downwind of the urban core (high NO x; low anthropogenic hydrocarbons), biogenic terpenes increased time-dependent ozone production rates by a factor of 50. Our study demonstrates that low-biomass density landscapes emit sufficient biogenic terpenes to have a significant impact on regional air quality.

Prevalence and correlates of poor sleep quality and daytime sleepiness in Belgian truck drivers.

PubMed

Braeckman, Lutgart; Verpraet, Rini; Van Risseghem, Marleen; Pevernagie, Dirk; De Bacquer, Dirk

2011-03-01

Sleepiness and sleep complaints are common among professional drivers. Sleepiness is a considerable problem not only because it affects the drivers' well-being, but also because of the consequences for performance and safety. Assessment of the (self-reported) prevalence and research into the risk factors are thus an important health issue and are also indispensable to prevent productivity loss and work-related accidents and injuries. Therefore, the aim of this study was to describe sleeping, driving, and health characteristics of Belgian truck drivers and to determine occupational and individual factors associated with poor sleep quality and daytime sleepiness. Cross-sectional data were collected using a self-administered questionnaire that included the Pittsburgh Sleep Quality Index (PSQI), Epworth Sleepiness Scale (ESS), and Berlin Questionnaire (BQ). The mean (SD) age of the 476 studied truck drivers was 42.7 (10.2) yrs and the mean (SD) body mass index was 27.3 (5.1) kg/m(2). Approximately 47% declared that they drove >50 h/wk and found their work schedule unrealistic. The mean (SD) PSQI score was 4.45 (2.7); poor quality of sleep (PSQI >5) was found in 27.2%. The mean (SD) ESS score was 6.79 (4.17); 18% had a score >10. The BQ indicated that 21.5% had a higher risk on obstructive sleep apnea. In multiple logistic regression analysis, low educational level (odds ratio [OR] 1.86), current smoking (OR 1.75), unrealistic work schedule (OR 1.75), and risk for obstructive sleep apnea (OR 2.97) were found to be independent correlates of daytime sleepiness. Poor sleep quality was significantly associated with poor self-perceived health (OR 1.95), unrealistic work schedule (OR 2.85), low job satisfaction (OR 1.91), and less driving experience (OR 1.73). These results show that poor sleep quality and daytime sleepiness were prevalent in Belgian truck drivers. Taking into account that several significant correlates with respect to these sleep problems were identified both at the individual and the occupational level, comprehensive countermeasures to improve working conditions and organization are needed, as well as health promotion interventions, to ensure the safety and well-being of truck drivers.

Variability of levels and composition of PM10 and PM2.5 in the Barcelona metro system

NASA Astrophysics Data System (ADS)

Querol, X.; Moreno, T.; Karanasiou, A.; Reche, C.; Alastuey, A.; Viana, M.; Font, O.; Gil, J.; de Miguel, E.; Capdevila, M.

2012-03-01

From an environmental perspective, the underground metro system is one of the cleanest forms of public transportation in urban agglomerations. Current studies report contradicting results regarding air quality in the metro systems: whereas some reveal poor air quality, others report PM levels which are lower or of the same order of magnitude than those measured in traffic sites above ground level. The present work assesses summer indoor air quality and passenger exposure in the Barcelona metro, focusing on PM levels and their metal contents. In addition, the impact on indoor air quality of platform screen door systems (automated systems consisting of closed rail track and platforms) is evaluated, to determine whether these systems reduce passenger exposure to PM when compared with conventional systems (open tracks and platforms). In the Barcelona metro, PM levels inside the trains in summer are amongst the lowest reported for worldwide metro systems (11-32 μPM2.5 m-3). This is most probably due to the air conditioning system working in all carriages of the Barcelona metro during the whole year. On the platforms, levels were considerably higher, reaching mean levels of 59 and 88 μgPM2.5 m-3 in the new (L9) and old (L3) lines, respectively. PM10 data are also reported in the present study, but comparison with other metro systems is more difficult due to the scarcity of data compared with PM2.5. Results showed clear PM daily cycles, with a drastic increase from 06:00 to 07:00 a.m., a diurnal maximum from 07:00 a.m. to 10:00 p.m., and marked decreases between 10:00 p.m. and 05:00 a.m. The elements with the highest enrichment are those associated with wheel or brake abrasion products (Ba, Fe, Cu, Mn, Cr, Sb, As, Mo, Co, Sr, among others). Laminar hematite (Fe2O3) was the dominant particle type, being mainly originated by mechanical abrasion of the rail track and wheels. Regarding passenger exposure to PM inside the metro system, the contribution of commuting by metro was estimated to account for around 10% of the daily exposure. Finally, we conclude that the implementation of platform screen door systems results in reductions of both PM levels and metal concentrations, but in addition an advanced optimized ventilation system gave even a much higher efficiency in reducing PM exposure to metro commuters. Combining these two features PM exposure levels in the platforms may be reduced down by a factor of 7 with respect the old subway lines in Barcelona.

Mass extinction efficiency and extinction hygroscopicity of ambient PM2.5 in urban China.

PubMed

Cheng, Zhen; Ma, Xin; He, Yujie; Jiang, Jingkun; Wang, Xiaoliang; Wang, Yungang; Sheng, Li; Hu, Jiangkai; Yan, Naiqiang

2017-07-01

The ambient PM 2.5 pollution problem in China has drawn substantial international attentions. The mass extinction efficiency (MEE) and hygroscopicity factor (f(RH)) of PM 2.5 can be readily applied to study the impacts on atmospheric visibility and climate. The few previous investigations in China only reported results from pilot studies and are lack of spatial representativeness. In this study, hourly average ambient PM 2.5 mass concentration, relative humidity, and atmospheric visibility data from China national air quality and meteorological monitoring networks were retrieved and analyzed. It includes 24 major Chinese cities from nine city-clusters with the period of October 2013 to September 2014. Annual average extinction coefficient in urban China was 759.3±258.3Mm -1 , mainly caused by dry PM 2.5 (305.8.2±131.0Mm -1 ) and its hygroscopicity (414.6±188.1Mm -1 ). High extinction coefficient values were resulted from both high ambient PM 2.5 concentration (68.5±21.7µg/m 3 ) and high relative humidity (69.7±8.6%). The PM 2.5 mass extinction efficiency varied from 2.87 to 6.64m 2 /g with an average of 4.40±0.84m 2 /g. The average extinction hygroscopic factor f(RH=80%) was 2.63±0.45. The levels of PM 2.5 mass extinction efficiency and hygroscopic factor in China were in comparable range with those found in developed countries in spite of the significant diversities among all 24 cities. Our findings help to establish quantitative relationship between ambient extinction coefficient (visual range) and PM 2.5 & relative humidity. It will reduce the uncertainty of extinction coefficient estimation of ambient PM 2.5 in urban China which is essential for the research of haze pollution and climate radiative forcing. Copyright © 2017 Elsevier Inc. All rights reserved.

Optimization of dose and image quality in adult and pediatric computed tomography scans

NASA Astrophysics Data System (ADS)

Chang, Kwo-Ping; Hsu, Tzu-Kun; Lin, Wei-Ting; Hsu, Wen-Lin

2017-11-01

Exploration to maximize CT image and reduce radiation dose was conducted while controlling for multiple factors. The kVp, mAs, and iteration reconstruction (IR), affect the CT image quality and radiation dose absorbed. The optimal protocols (kVp, mAs, IR) are derived by figure of merit (FOM) based on CT image quality (CNR) and CT dose index (CTDIvol). CT image quality metrics such as CT number accuracy, SNR, low contrast materials' CNR and line pair resolution were also analyzed as auxiliary assessments. CT protocols were carried out with an ACR accreditation phantom and a five-year-old pediatric head phantom. The threshold values of the adult CT scan parameters, 100 kVp and 150 mAs, were determined from the CT number test and line pairs in ACR phantom module 1and module 4 respectively. The findings of this study suggest that the optimal scanning parameters for adults be set at 100 kVp and 150-250 mAs. However, for improved low- contrast resolution, 120 kVp and 150-250 mAs are optimal. Optimal settings for pediatric head CT scan were 80 kVp/50 mAs, for maxillary sinus and brain stem, while 80 kVp /300 mAs for temporal bone. SNR is not reliable as the independent image parameter nor the metric for determining optimal CT scan parameters. The iteration reconstruction (IR) approach is strongly recommended for both adult and pediatric CT scanning as it markedly improves image quality without affecting radiation dose.

Large scale real-time PCR analysis of mRNA abundance in rainbow trout eggs in relationship with egg quality and post-ovulatory ageing.

PubMed

Aegerter, Sandrine; Jalabert, Bernard; Bobe, Julien

2005-11-01

The mRNA levels of 39 target genes were monitored in unfertilized eggs of 14 rainbow trout sampled the day of ovulation and again 5, 14, and 21 days later. For all 56 collected egg batches, an egg sample was fertilized to estimate egg quality by monitoring embryonic development. Remaining eggs were used for RNA extraction and subsequent real-time PCR analysis. A significant drop of egg quality was observed when eggs were held in the body cavity for 14 or 21 days post-ovulation (dpo). During the same period, eight transcripts (nucleoplasmin or Npm2, ferritin H, tubulin beta, JNK1, cyclin A1, cyclin A2, cathepsin Z, and IGF2) exhibited a differential abundance at one or several collection time(s). Interestingly, we observed higher levels of cyclins A1 and A2 mRNAs in eggs taken 5 days post-ovulation than in eggs taken, from the same females, at the time of ovulation. In addition, seven transcripts exhibited a differential abundance between low quality and high quality eggs. Low quality eggs were characterized by lower levels of Npm2, tubulin beta, and IGF1 transcripts. In contrast, keratins 8 and 18, cathepsin Z, and prostaglandin synthase 2 were more abundant in low quality eggs than in high quality eggs. In this study, we have demonstrated differences in mRNA levels in the rainbow trout egg that are reflective of developmental competence differences induced by post-ovulatory ageing. The putative role of these transcripts in post-ovulatory ageing-induced egg quality defects is discussed with special attention for corresponding cellular functions.

Investigating the use of an antiscatter grid in chest radiography for average adults with a computed radiography imaging system

PubMed Central

Wood, T J; Avery, G; Balcam, S; Needler, L; Smith, A; Saunderson, J R; Beavis, A W

2015-01-01

Objective: The aim of this study was to investigate via simulation a proposed change to clinical practice for chest radiography. The validity of using a scatter rejection grid across the diagnostic energy range (60–125 kVp), in conjunction with appropriate tube current–time product (mAs) for imaging with a computed radiography (CR) system was investigated. Methods: A digitally reconstructed radiograph algorithm was used, which was capable of simulating CR chest radiographs with various tube voltages, receptor doses and scatter rejection methods. Four experienced image evaluators graded images with a grid (n = 80) at tube voltages across the diagnostic energy range and varying detector air kermas. These were scored against corresponding images reconstructed without a grid, as per current clinical protocol. Results: For all patients, diagnostic image quality improved with the use of a grid, without the need to increase tube mAs (and therefore patient dose), irrespective of the tube voltage used. Increasing tube mAs by an amount determined by the Bucky factor made little difference to image quality. Conclusion: A virtual clinical trial has been performed with simulated chest CR images. Results indicate that the use of a grid improves diagnostic image quality for average adults, without the need to increase tube mAs, even at low tube voltages. Advances in knowledge: Validated with images containing realistic anatomical noise, it is possible to improve image quality by utilizing grids for chest radiography with CR systems without increasing patient exposure. Increasing tube mAs by an amount determined by the Bucky factor is not justified. PMID:25571914

Failed heart rate control with oral metoprolol prior to coronary CT angiography: effect of additional intravenous metoprolol on heart rate, image quality and radiation dose.

PubMed

Jiménez-Juan, Laura; Nguyen, Elsie T; Wintersperger, Bernd J; Moshonov, Hadas; Crean, Andrew M; Deva, Djeven P; Paul, Narinder S; Torres, Felipe S

2013-01-01

The purpose of this study was to evaluate the effect of intravenous (i.v.) metoprolol after a suboptimal heart rate (HR) response to oral metoprolol (75-150 mg) on HR control, image quality (IQ) and radiation dose during coronary CTA using 320-MDCT. Fifty-three consecutive patients who failed to achieve a target HR of < 60 bpm after an oral dose of metoprolol and required supplementary i.v. metoprolol (5-20 mg) prior to coronary CTA were evaluated. Patients with HR < 60 bpm during image acquisition were defined as responders (R) and those with HR ≥ 60 bpm as non-responders (NR). Two observers assessed IQ using a 3-point scale (1-2, diagnostic and 3, non-diagnostic). Effective dose (ED) was estimated using dose-length product and a 0.014 mSV/mGy.cm conversion factor. Baseline characteristics and HR on arrival were similar in the two groups. 58% of patients didn't achieve the target HR after receiving i.v. metoprolol (NR). R had a significantly higher HR reduction after oral (mean HR 63.9 ± 4.5 bpm vs. 69.6 ± 5.6 bpm) (p < 0.005) and i.v. (mean HR 55.4 ± 3.9 bpm vs. 67.4 ± 5.3 bpm) (p < 0.005) doses of metoprolol. Studies from NR showed a significantly higher ED in comparison to R (8.0 ± 2.9 vs. 6.1 ± 2.2 mSv) (p = 0.016) and a significantly higher proportion of non-diagnostic coronary segments (9.2 vs. 2.5%) (p < 0.001). 58% of patients who do not achieve a HR of <60 bpm prior to coronary CTA with oral fail to respond to additional i.v. metoprolol and have studies with higher radiation dose and worse image quality.

The contribution of residential coal combustion to the air quality in Beijing-Tianjin-Hebei (BTH), China: A case study

NASA Astrophysics Data System (ADS)

Li, X.; Li, G.; Junji, C.

2017-12-01

In the present study, a persistent heavy haze episode from 13 to 20 January 2014 in Beijing-Tianjin-Hebei (BTH) is simulated using the WRF-CHEM model to evaluate the contribution of residential coal combustion to the air quality. The residential coal used in BTH is replaced by the water-quenched semi-coke with much lower emission factors (EFs) in simulations. The EFs of OC for water-quenched semi-coke (0.12 g kg-1) is 2.42 times lower than that for residential coal used in Beijing-Tianjin (0.29 g kg-1) and 9.17 times in Hebei (1.1 g kg-1). The WRF-CHEM model reasonably well reproduces the spatial distributions and temporal variations of PM2.5 mass concentrations in BTH against the observations over monitoring sites and the temporal variations of aerosol species compared to the AMS measurements in Beijing. On average, the PM2.5 concentration is reduced by around 20 µg m-3 due to the residential coal replacement. Organic aerosols constitute about 62.3% of the PM2.5 reduction in BTH, much higher than the contribution from sulfate (7.0%), nitrate (3.1%), and ammonium (3.1%). In addition, the usage of water-quenched semi-coke in BTH also significantly reduces polycyclic aromatic hydrocarbon (PAHs) concentrations by 50-450 ng m-3 on average. Therefore, the usage of water-quenched semi-coke in BTH could considerably reduce the emissions of air pollutants and decrease the PM2.5 level, beneficial to improvement of the air quality in BTH.

The After Breast Cancer Pooling Project: rationale, methodology, and breast cancer survivor characteristics.

PubMed

Nechuta, Sarah J; Caan, Bette J; Chen, Wendy Y; Flatt, Shirley W; Lu, Wei; Patterson, Ruth E; Poole, Elizabeth M; Kwan, Marilyn L; Chen, Zhi; Weltzien, Erin; Pierce, John P; Shu, Xiao Ou

2011-09-01

The After Breast Cancer Pooling Project was established to examine the role of physical activity, adiposity, dietary factors, supplement use, and quality of life (QOL) in breast cancer prognosis. This paper presents pooled and harmonized data on post-diagnosis lifestyle factors, clinical prognostic factors, and breast cancer outcomes from four prospective cohorts of breast cancer survivors (three US-based and one from Shanghai, China) for 18,314 invasive breast cancer cases diagnosed between 1976 and 2006. Most participants were diagnosed with stage I-II breast cancer (84.7%). About 60% of breast tumors were estrogen receptor (ER)+/progesterone receptor (PR)+; 21% were ER-/PR-. Among 8,118 participants with information on HER-2 tumor status, 74.8% were HER-2- and 18.5% were HER-2+. At 1-2 years post-diagnosis (on average), 17.9% of participants were obese (BMI ≥ 30 kg/m2), 32.6% were overweight (BMI 25-29 kg/m2), and 59.9% met the 2008 Physical Activity Guidelines for Americans (≥ 2.5 h per week of moderate activity). During follow-up (mean = 8.4 years), 3,736 deaths (2,614 from breast cancer) and 3,564 recurrences have been documented. After accounting for differences in year of diagnosis and timing of post-diagnosis enrollment, five-year overall survival estimates were similar across cohorts. This pooling project of 18,000 breast cancer survivors enables the evaluation of associations of post-diagnosis lifestyle factors, QOL, and breast cancer outcomes with an adequate sample size for investigation of heterogeneity by hormone receptor status and other clinical predictors. The project sets the stage for international collaborations for the investigation of modifiable predictors for breast cancer outcomes.

Association between cardiometabolic risk factors and body mass index based on diagnosis and treatment codes in an electronic medical record database.

PubMed

Brixner, Diana; Ghate, Sameer R; McAdam-Marx, Carrie; Ben-Joseph, Rami; Said, Qayyim

2008-10-01

Managed care organizations (MCOs) have access to treatment and diagnosis information from administrative claims data but generally have limited or no access to clinical information about laboratory values or biometric values such as body mass index (BMI) or waist circumference. Thus, MCOs are generally unable to identify overweight patients with cardiometabolic risk factors that put them at a high risk of poor outcomes. The National Heart, Lung, and Blood Institute defines normal body weight as a BMI (ratio of weight in kilograms to height in meters squared [kg/m2]) from 18.5 to 24.9 kg/m2, overweight as 25.0 to 29.9 kg/m2, and obesity as a BMI of 30 kg/m2 or greater. Current guidelines for weight-loss pharmacotherapy, including U.S. Food and Drug Administration-approved label indications, specify use in patients with a BMI of 30 kg/m2 or greater, or a BMI > 27 kg/m2 and at least 1 concomitant cardiometabolic risk factor such as controlled hypertension, diabetes, or dyslipidemia. To evaluate the association of cardiometabolic risk factors with BMI as recorded in a database of electronic medical records (EMRs). Each patient had a minimum look-back observation period of 2 years from the last date of activity in the EMR. Patients with a BMI of 18 kg/m2 or greater recorded in the EMR at any time during the 10-year period from January 1996 through December 2005 were stratified into groups by the number of cardiometabolic risk factors and by individual cardiometabolic risk for those with just 1 risk factor. Cardiometabolic risk factors were identified from diagnoses and prescription orders in the EMR associated with high triglyceride levels, low high-density lipoprotein cholesterol (HDL-C) levels, type 2 diabetes, or hypertension. Unadjusted and adjusted odds ratios (ORs) of having a BMI >27 kg/m2 were calculated for each risk factor group and for patients with no risk factors. Using logistic regression analysis, ORs were adjusted for age, gender, insurance type, region, medications associated with weight gain or weight loss, and diseases that modify weight. A total of 499,593 patients with a BMI of 18 kg/m2 or greater were identified; 56.4% (n = 281,988) had a BMI > 27 kg/m2, whereas 43.6% (n = 217,605) had a BMI between 18 and 27 kg/m2. Compared with patients with no risk factors (n = 289,960), patients with 1-4 risk factors (n = 209,633) were significantly more likely to have a BMI > 27 kg/m2; 48.4% of patients without cardiometabolic risk factors had a BMI > 27 kg/m2, compared with 63.3%, 79.8%, 84.6%, and 88.5% for patients with 1-4 cardiometabolic risk factors, respectively (all comparisons P < 0.001). Adjusted ORs for having a BMI > 27 kg/m2 were 2.64 (95% confidence interval [CI] = 2.51-2.77) for type 2 diabetes, 2.21 (95% CI = 2.05-2.37) for elevated triglycerides, 1.91 (95% CI = 1.88-1.94) for hypertension, and 1.45 (95% CI = 1.29-1.63) for low HDL-C. Adjusted ORs for having a BMI > 27 kg/m2 were 3.58 (95% CI = 3.47-3.69), 4.24 (95% CI = 3.93-4.59), and 5.07 (95% CI = 3.77-6.81) for patients with any 2, 3, and 4 risk factors respectively, relative to patients with no cardiometabolic risk factors. For patients with cardiometabolic risk factors, compared with patients with no risk factors, the odds of having a BMI > 27 kg/m2 were multiplied by 1.45-5.07, depending on the type and number of risk factors. Diagnoses and treatment indicators for cardiometabolic risk factors are potential indicators of obesity.

Studies on convective drying of `Ameclyae' Opuntia ficus-indica seeds and its effect on the quality of extracted oil based on its α-tocopherol content

NASA Astrophysics Data System (ADS)

Hassini, Lamine; Bettaieb, Emna; Motri, Samia; Desmorieux, Hélène

2018-02-01

The aim of this work is to model the thin layer convective drying kinetics of `Ameclyae' prickly pear seed variety and to evaluate the effects of drying conditions on the quality of extracted seed oil, specifically α-tocopherol content. Drying experiments were carried on following a full 23 factorial design using a vertical drying tunnel. The study is restricted to a particular particle size and a particular seed bed of height 0.5 cm, of effective porosity around 0.4 and of initial moisture content on dry basis equal to 1.2 (± 0.01) kg/kg. The temperature range was 45 to 70 °C, relative humidity range was 15-30% and air velocity was 1 and 2 m/s. The experimental drying curves were fitted to different semi-theoretical drying models proposed in the literature. The Midilli-Kucuk model was found with satisfaction describing the seed air drying curves with a correlation coefficient of 0.999 and a standard error of 0.01. For each drying condition, the extraction of fixed oil seeds was performed at cold using liquid/solid separation method. The oil quality was evaluated on the basis of the α-tocopherol content. The α-tocopherol was identified and quantified by high-performance liquid chromatography (HPLC-UV). According to the experimental results, it was found that drying air velocity is the most important factor influencing the concentration of α-tocopherol, whereas the effects of temperature and relative humidity were lower. The increase of the velocity from 1 m/s to 2 m/s reduced the α-tocopherol concentration by about 25%. The convective drying of thin layer of seeds at soft air conditions, drying temperature of 45 °C, relative humidity of 15% and air velocity of 1 m/s give the optimal quality of extracted oil in terms of α-tocopherol content. Characterization of the morphologic structure of seeds was also performed by SEM.

Quality of sweat test (ST) based on the proportion of sweat sodium (Na) and sweat chloride (Cl) as diagnostic parameter of cystic fibrosis: are we on the right way?

PubMed

Faria, Alethéa Guimarães; Marson, Fernando Augusto Lima; Gomez, Carla Cristina de Souza; Ribeiro, Maria Ângela Gonçalves de Oliveira; Morais, Lucas Brioschi; Servidoni, Maria de Fátima; Bertuzzo, Carmen Sílvia; Sakano, Eulália; Goto, Maura; Paschoal, Ilma Aparecida; Pereira, Mônica Corso; Hessel, Gabriel; Levy, Carlos Emílio; Toro, Adyléia Aparecida Dalbo Contrera; Peixoto, Andressa Oliveira; Simões, Maria Cristina Ribeiro; Lomazi, Elizete Aparecida; Nogueira, Roberto José Negrão; Ribeiro, Antônio Fernando; Ribeiro, José Dirceu

2016-10-26

To assess the quality of sweat test (ST) based on the proportion of sweat sodium and sweat chloride as diagnostic parameter of cystic fibrosis (CF). A retrospective study of 5,721 sweat samples and subsequent descriptive analysis were carried out. The test was considered "of good quality" (correct) when: (i) sweat chloride was lower than 60 mEq/L, and sweat sodium was higher than sweat chloride; (ii) sweat chloride was higher than 60 mEq/L, and sweat sodium was lower than sweat chloride. The study included 5,692/5,721 sweat samples of ST which had been requested due to clinical presentations compatible with CF and/or neonatal screenings with altered immunoreactive trypsinogen values. Considering the proportion of sweat sodium and sweat chloride as ST quality parameter, the test was performed correctly in 5,023/5,692 (88.2 %) sweat samples. The sweat chloride test results were grouped into four reference ranges for chloride (i) chloride < 30 mEq/L: 3,651/5,692 (64.1 %); (ii) chloride ≥ 30 mEq/L to < 40 mEq/L: 652/5,692 (11.5 %); (iii) ≥ 40 mEq/L to < 60 mEq/L: 673/5,692 (11.8 %); (iv) ≥ 60 mEq/L: 716/5,692 (12.6 %). In the comparative analysis, there was no association between ST quality and: (i) symptoms to indicate a ST [respiratory (p = 0.084), digestive (p = 0.753), nutritional (p = 0.824), and others (p = 0.136)], (ii) sweat weight (p = 0.416). However, there was a positive association with: (i) gender, (ii) results of ST (p < 0.001), (iii) chloride/sodium ratio (p < 0.001), (iv) subject's age at the time of ST [grouped according to category (p < 0.001) and numerical order (p < 0.001)]. For the subset of 169 patients with CF and two CFTR mutations Class I, II and/or III, in comparative analysis, there was a positive association with: (i) sweat chloride/sodium ratio (p < 0.001), (ii) sweat chloride values (p = 0.047), (iii) subject's age at the time of the ST grouped by numerical order (p = 0.001). Considering that the quality of ST can be assessed by levels of sweat sodium and sweat chloride, an increasing number of low-quality tests could be observed in our sweat samples. The quality of the test was associated with important factors, such as gender, CF diagnosis, and subjects' age.

Dose, image quality and spine modeling assessment of biplanar EOS micro-dose radiographs for the follow-up of in-brace adolescent idiopathic scoliosis patients.

PubMed

Morel, Baptiste; Moueddeb, Sonia; Blondiaux, Eleonore; Richard, Stephen; Bachy, Manon; Vialle, Raphael; Ducou Le Pointe, Hubert

2018-05-01

The aim of this study was to compare the radiation dose, image quality and 3D spine parameter measurements of EOS low-dose and micro-dose protocols for in-brace adolescent idiopathic scoliosis (AIS) patients. We prospectively included 25 consecutive patients (20 females, 5 males) followed for AIS and undergoing brace treatment. The mean age was 12 years (SD 2 years, range 8-15 years). For each patient, in-brace biplanar EOS radiographs were acquired in a standing position using both the conventional low-dose and micro-dose protocols. Dose area product (DAP) was systematically recorded. Diagnostic image quality was qualitatively assessed by two radiologists for visibility of anatomical structures. The reliability of 3D spine modeling between two operators was quantitatively evaluated for the most clinically relevant 3D radiological parameters using intraclass correlation coefficient (ICC). The mean DAP for the posteroanterior and lateral acquisitions was 300 ± 134 and 433 ± 181 mGy cm 2 for the low-dose radiographs, and 41 ± 19 and 81 ± 39 mGy cm 2 for micro-dose radiographs. Image quality was lower with the micro-dose protocol. The agreement was "good" to "very good" for all measured clinical parameters when comparing the low-dose and micro-dose protocols (ICC > 0.73). The micro-dose protocol substantially reduced the delivered dose (by a factor of 5-7 compared to the low-dose protocol) in braced children with AIS. Although image quality was reduced, the micro-dose protocol proved to be adapted to radiological follow-up, with adequate image quality and reliable clinical measurements. These slides can be retrieved under Electronic Supplementary Material.

Scaling Up Integrated Community Case Management of Childhood Illness: Update from Malawi

PubMed Central

Nsona, Humphreys; Mtimuni, Angella; Daelmans, Bernadette; Callaghan-Koru, Jennifer A.; Gilroy, Kate; Mgalula, Leslie; Kachule, Timothy; Zamasiya, Texas

2012-01-01

The Government of Malawi (GoM) initiated activities to deliver treatment of common childhood illnesses (suspected pneumonia, fever/suspected malaria, and diarrhea) in the community in 2008. The service providers are Health Surveillance Assistants (HSAs), and they are posted nationwide to serve communities at a ratio of 1 to 1,000 population. The GoM targeted the establishment of 3,452 village health clinics (VHCs) in hard-to-reach areas by 2011. By September of 2011, 3,296 HSAs had received training in integrated case management of childhood illness, and 2,709 VHCs were functional. An assessment has shown that HSAs are able to treat sick children with quality similar to the quality provided in fixed facilities. Monitoring data also suggest that communities are using the sick child services. We summarize factors that have facilitated the scale up of integrated community case management of children in Malawi and address challenges, such as ensuring a steady supply of medicines and supportive supervision. PMID:23136278

10 kHz ps 1342 nm laser generation by an electro-optically cavity-dumped mode-locked Nd:YVO4 laser

NASA Astrophysics Data System (ADS)

Chen, Ying; Liu, Ke; He, Li-jiao; Yang, Jing; Zong, Nan; Yang, Feng; Gao, Hong-wei; Liu, Zhao; Yuan, Lei; Lan, Ying-jie; Bo, Yong; Peng, Qin-jun; Cui, Da-fu; Xu, Zu-yan

2017-01-01

We have demonstrated an electro-optically cavity-dumped mode-locked (CDML) picosecond Nd:YVO4 laser at 1342 nm with 880 nm diode-laser direct pumping. At a repetition rate of 10 kHz, an average output power of 0.119 W was achieved, corresponding to a pulse energy of 11.9 μJ. Compared with the continuous wave mode-locking pulse energy of 17.5 nJ, the CDML pulse energy was 680 times higher. The pulse width was measured to be 33.4 ps, resulting in the peak power of 356 kW. Meanwhile, the beam quality was nearly diffraction limited with an average beam quality factor M2 of 1.29.

High power far-infrared optical parametric oscillator with high beam quality

NASA Astrophysics Data System (ADS)

Qian, Chuan-Peng; Shen, Ying-Jie; Dai, Tong-Yu; Duan, Xiao-Ming; Yao, Bao-Quan

2016-11-01

A high power ZnGeP2 (ZGP) optical parametric oscillator (OPO) with good beam quality pumped by a Q-switched Ho:YAG laser was demonstrated. The maximum output power of the ZGP OPO with a four-mirror ring cavity was about 5.04 W around 8.1 μm with 83.9 W Ho incident pump power, corresponding to a slope efficiency of 9.2 %. The ZGP OPO produced 36.0 ns far-IR pulse laser in the 8.0-8.3 μm spectral regions. The beam quality was measured to be M2 1.6 at the highest output power.

The relationship of serum cortisol levels with depression, cognitive function and sleep disorders in chronic kidney disease and hemodialysis patients.

PubMed

Afsar, Baris

2014-12-01

In the present study, the relationships between cortisol, cognitive function, depressive behavior, and sleep quality in chronic kidney disease (CKD) and hemodialysis (HD) patients was investigated. Patients underwent history taking, physical examination, biochemical analysis, 24-h urine collection (for CKD patients only), measurement of dialysis adequacy (for HD patients only), evaluation of cognitive function, depressive behavior and sleep quality. Among study participants 58 had creatinine clearance ≥60 mL/min/1.73 m(2) (Group 1), 41 had creatinine clearance between 30 and 59 mL/min/1.73 m(2) (Group 2), 25 had creatinine clearance between 15 and 29 mL/min/1.73 m(2) (Group 3) and 12 had creatinine clearance <15 mL/min/1.73 m(2) (Group 4). 38 patients were regular HD patients (Group 5). The cortisol levels in Group 1, 2, 3, 4 and 5 patients were 472.3 ± 138.4, 490.2 ± 214.3, 541.6 ± 172.8, 569.9 ± 101.0 and 637.8 ± 153.7 nmol/L, respectively (P < 0.0001 for trend). In both non-dialysis patient group and dialysis patients linear regression analysis showed that cortisol was independently related with Beck depression inventory (BDI) score (P: 0.013 and 0.001, respectively) but not with cognitive function and sleep quality. In conclusion serum cortisol levels were independently associated with depressive behavior both in CKD and HD patients but not with cognitive function and sleep quality.

Factors Affecting Sleep Quality of Patients in Intensive Care Unit

PubMed Central

Bihari, Shailesh; Doug McEvoy, R.; Matheson, Elisha; Kim, Susan; Woodman, Richard J.; Bersten, Andrew D.

2012-01-01

Introduction: Sleep disturbance is a frequently overlooked complication of intensive care unit (ICU) stay. Aim: To evaluate sleep quality among patients admitted to ICU and investigate environmental and non-environmental factors that affect sleep quality in ICU. Methods: Over a 22-month period, we consecutively recruited patients who spent ≥ 2 nights post-endotracheal extubation in ICU and who were orientated to time, place, and person on the day of discharge. Self-reported sleep quality, according to a modified Freedman questionnaire, which provided data on self-reported ICU sleep quality in ICU and environmental factors affecting sleep quality in the ICU, were collected. We also investigated non-environmental factors, such as severity of illness, ICU interventions, and medications that can affect sleep quality. Results: Fifty males and 50 females were recruited with a mean (± SD) age of 65.1 ± 15.2 years. APACHE II score at admission to ICU was 18.1 ± 7.5 with duration of stay 6.7 ± 6.5days. Self-reported sleep quality score at home (1 = worst; 10 = best) was 7.0 ± 2.2; this decreased to 4.0 ± 1.7 during their stay in ICU (p < 0.001). In multivariate analysis with APACHE III as severity of illness (R2 = 0.25), factors [exp(b)(95% CI), p value] which significantly affected sleep in ICU were sex [0.37(0.19-0.72), p < 0.01], age and sex interaction [1.02(1.01-1.03), p < 0.01], bedside phone [0.92(0.87-0.97), p < 0.01], prior quality of sleep at home [1.30(1.05-1.62), p = 0.02], and use of steroids [0.82(0.69-0.98), p = 0.03] during the stay in ICU. Conclusion: Reduced sleep quality is a common problem in ICU with a multifactorial etiology. Citation: Bihari S; McEvoy RD; Kim S; Woodman RJ; Bersten AD. Factors affecting sleep quality of patients in intensive care unit. J Clin Sleep Med 2012;8(3):301-307. PMID:22701388

Role of BMI and age in predicting pathologic vertebral fractures in newly diagnosed multiple myeloma patients: A retrospective cohort study.

PubMed

Chen, Yi-Lun; Liu, Yao-Chung; Wu, Chia-Hung; Yeh, Chiu-Mei; Chiu, Hsun-I; Lee, Gin-Yi; Lee, Yu-Ting; Hsu, Pei; Lin, Ting-Wei; Gau, Jyh-Pyng; Hsiao, Liang-Tsai; Chiou, Tzeon-Jye; Liu, Jin-Hwang; Liu, Chia-Jen

2018-04-01

Vertebral fractures affect approximately 30% of myeloma patients and lead to a poor impact on survival and life quality. In general, age and body mass index (BMI) are reported to have an important role in vertebral fractures. However, the triangle relationship among age, BMI, and vertebral fractures is still unclear in newly diagnosed multiple myeloma (NDMM) patients. This study recruited consecutive 394 patients with NDMM at Taipei Veterans General Hospital between January 1, 2005 and December 31, 2015. Risk factors for vertebral fractures in NDMM patients were collected and analyzed. The survival curves were demonstrated using Kaplan-Meier estimate. In total, 301 (76.4%) NDMM patients were enrolled in the cohort. In the median follow-up period of 18.0 months, the median survival duration in those with vertebral fractures ≥ 2 was shorter than those with vertebral fracture < 2 (59.3 vs 28.6 months; P = 0.017). In multivariate Poisson regression, BMI < 18.5 kg/m 2 declared increased vertebral fractures compared with BMI ≥ 24.0 kg/m 2 (adjusted RR, 2.79; 95% CI, 1.44-5.43). In multivariable logistic regression, BMI < 18.5 kg/m 2 was an independent risk factor for vertebral fractures ≥ 2 compared with BMI ≥ 24.0 kg/m 2 (adjusted OR, 6.05; 95% CI, 2.43-15.08). Among age stratifications, patients with both old age and low BMI were at a greater risk suffering from increased vertebral fractures, especially in patients > 75 years and BMI < 18.5 kg/m 2 (adjusted RR, 12.22; 95% CI, 3.02-49.40). This is the first study that demonstrated that age had a significant impact on vertebral fractures in NDMM patients with low BMI. Elder patients with low BMI should consider to routinely receive spinal radiographic examinations and regular follow-up. Copyright © 2017 John Wiley & Sons, Ltd.

Parabolic single-crystal diamond lenses for coherent x-ray imaging

DOE PAGES

Terentyev, Sergey; Blank, Vladimir; Polyakov, Sergey; ...

2015-09-18

We demonstrate parabolic single-crystal diamond compound refractive lenses designed for coherent x-ray imaging resilient to extreme thermal and radiation loading expected from next generation light sources. To ensure the preservation of coherence and resilience, the lenses are manufactured from the highest-quality single-crystalline synthetic diamond material grown by a high-pressure high-temperature technique. Picosecond laser milling is applied to machine lenses to parabolic shapes with a ≃1 μm precision and surface roughness. The compound refractive lens comprised of six lenses with a radius of curvature R=200 μm at the vertex of the parabola and a geometrical aperture A=900 μm focuses 10 keVmore » x-ray photons from an undulator source at the Advanced Photon Source facility to a focal spot size of ≃20×90 μm 2 with a gain factor of ≃50-100.« less

Optimized Shielding and Fabrication Techniques for TiN and Al Microwave Resonators

NASA Astrophysics Data System (ADS)

Kreikebaum, John Mark; Kim, Eunseong; Livingston, William; Dove, Allison; Calusine, Gregory; Hover, David; Rosenberg, Danna; Oliver, William; Siddiqi, Irfan

We present a systematic study of the effects of shielding and packaging on the internal quality factor (Qi) of Al and TiN microwave resonators designed for use in qubit readout. Surprisingly, Qi =1.3x106 TiN samples investigated at 100 mK exhibited no significant changes in linewidth when operated without magnetic shielding and in an open cryo-package. In contrast, Al resonators showed systematic improvement in Qi with each successive shield. Measurements were performed in an adiabatic demagnetization refrigerator, where typical ambient fields of 0.2 mT are present at the sample stage. We discuss the effect of 100 mK and 500 mK Cu radiation shields and cryoperm magnetic shielding on resonator Q as a function of temperature and input power in samples prepared with a variety of surface treatments, fabrication recipes, and embedding circuits. This research was supported by the ARO and IARPA.

High field Q slope and the effect of low-temperature baking at 3 GHz

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ciovati, G.; Eremeev, G.; Hannon, F.

Here, a strong degradation of the unloaded quality factor with field, called high field Q-slope, is commonly observed above Bmore » $$_{p}$$ $$\\cong$$ 100 mT in elliptical superconducting niobium cavities at 1.3 GHz and 1.5 GHz. In the present experiments several 3 GHz niobium cavities were measured up to and above B$$_{p}$$ $$\\cong$$100 mT. The measurements show that a high field Q-slope phenomenon limits the field reach at this frequency, that the high field Q-slope onset field depends weakly on the frequency, and that the high field Q-slope can be removed by the typical empirical solution of electropolishing followed by heating to 120 $$^{\\circ}$$C for 48 hrs. In addition, one of the cavities reached a quench field of 174~mT and its field dependence of the quality factor was compared against global heating predicted by a thermal feedback model.« less

High field Q slope and the effect of low-temperature baking at 3 GHz

DOE PAGES

Ciovati, G.; Eremeev, G.; Hannon, F.

2018-01-29

Here, a strong degradation of the unloaded quality factor with field, called high field Q-slope, is commonly observed above Bmore » $$_{p}$$ $$\\cong$$ 100 mT in elliptical superconducting niobium cavities at 1.3 GHz and 1.5 GHz. In the present experiments several 3 GHz niobium cavities were measured up to and above B$$_{p}$$ $$\\cong$$100 mT. The measurements show that a high field Q-slope phenomenon limits the field reach at this frequency, that the high field Q-slope onset field depends weakly on the frequency, and that the high field Q-slope can be removed by the typical empirical solution of electropolishing followed by heating to 120 $$^{\\circ}$$C for 48 hrs. In addition, one of the cavities reached a quench field of 174~mT and its field dependence of the quality factor was compared against global heating predicted by a thermal feedback model.« less

A Genetically Informed Study of Associations between Family Functioning and Child Psychosocial Adjustment

PubMed Central

Schermerhorn, Alice C.; D’Onofrio, Brian M.; Turkheimer, Eric; Ganiban, Jody M.; Spotts, Erica L.; Lichtenstein, Paul; Reiss, David; Neiderhiser, Jenae M.

2010-01-01

Research has documented associations between family functioning and offspring psychosocial adjustment, but questions remain regarding whether these associations are partly due to confounding genetic factors and other environmental factors. The current study used a genetically informed approach, the Children of Twins design, to explore the associations between family functioning (family conflict, marital quality, and agreement about parenting) and offspring psychopathology. Participants were 867 twin pairs (388 MZ; 479 DZ) from the Twin and Offspring Study in Sweden (TOSS), their spouses, and children (51.7% female; M = 15.75 years). The results suggested associations between exposure to family conflict (assessed by the mother, father, and child) and child adjustment were independent of genetic factors and other environmental factors. However, when family conflict was assessed using only children’s reports, the results indicated that genetic factors also influenced these associations. In addition, the analyses indicated that exposure to low marital quality and agreement about parenting was associated with children’s internalizing and externalizing problems, and that genetic factors also contributed to the associations of marital quality and agreement about parenting with offspring externalizing problems. PMID:21142367

Validation/Calibration of SMOS L2 Soil Moisture in Crop Area, Eastern China

NASA Astrophysics Data System (ADS)

Cui, Huizhen; Jiang, Lingmei; Yang, Na; Lu, Zheng

2016-08-01

The Soil Moisture and Ocean Salinity (SMOS) is the worldwide satellite dedicated to retrieve soil moisture information at the global scale, with a high temporal resolution, and from space borne L-band 2-D interferometry radiometer. Product validation for the accuracy of data and utilization is a crucial step. At present, the validation work carried out in China was mainly concentrated in the Tibetan Plateau. The study of this paper mainly focused on the validation of SMOS L2 soil moisture data products in the north of Henan province plain region. This region is in front of Taihang Mountains. Results from the average-average and node- site comparison show that the correlation coefficients (R) between 0.20 and 0.40, also the existence of dry bias mainly concentrated in the 0.07 0.11m3m-3. Finally, this paper analysed the influence factors on the quality of SMOS soil moisture products.

Comparison of exposure estimation methods for air pollutants: ambient monitoring data and regional air quality simulation.

PubMed

Bravo, Mercedes A; Fuentes, Montserrat; Zhang, Yang; Burr, Michael J; Bell, Michelle L

2012-07-01

Air quality modeling could potentially improve exposure estimates for use in epidemiological studies. We investigated this application of air quality modeling by estimating location-specific (point) and spatially-aggregated (county level) exposure concentrations of particulate matter with an aerodynamic diameter less than or equal to 2.5 μm (PM(2.5)) and ozone (O(3)) for the eastern U.S. in 2002 using the Community Multi-scale Air Quality (CMAQ) modeling system and a traditional approach using ambient monitors. The monitoring approach produced estimates for 370 and 454 counties for PM(2.5) and O(3), respectively. Modeled estimates included 1861 counties, covering 50% more population. The population uncovered by monitors differed from those near monitors (e.g., urbanicity, race, education, age, unemployment, income, modeled pollutant levels). CMAQ overestimated O(3) (annual normalized mean bias=4.30%), while modeled PM(2.5) had an annual normalized mean bias of -2.09%, although bias varied seasonally, from 32% in November to -27% in July. Epidemiology may benefit from air quality modeling, with improved spatial and temporal resolution and the ability to study populations far from monitors that may differ from those near monitors. However, model performance varied by measure of performance, season, and location. Thus, the appropriateness of using such modeled exposures in health studies depends on the pollutant and metric of concern, acceptable level of uncertainty, population of interest, study design, and other factors. Copyright © 2012 Elsevier Inc. All rights reserved.

[Quality of professional life and musculoskeletal disorders in nurses].

PubMed

Rodarte-Cuevas, Lilia; Araujo-Espino, Roxana; Trejo-Ortiz, Perla María; González-Tovar, José

To characterize the conditions of quality of working life, the presence of muscle- skeletal disorders and the association between these variables in nursing staff of a public hospital in Zacatecas, Mexico. A cross-sectional study with descriptive-correlational scope was designed. A stratified random sampling per shift was used in 107 cases. The Questionnaire Professional Quality of Life (CVP-35) was applied as well as the Nordic Questionnaire Standardized for musculoskeletal pain and work-related risk factors questionnaire. The quality of working life gained an average of 55.62 (SD=13.57), the intrinsic motivation was the best rated component with (M=75.06, SD=18.44), contrary to managerial support that got the lowest scores with (M=43.74, SD=21.71). The presence of risk factors in the development work of musculoskeletal problems obtained a mean of 50.10 (SD=26.69). The main musculoskeletal disorders occurred in the neck region, lumbar spine and knees with 42.1% for each one. The quality of working life decreased in the presence of muscle-skeletal problems in the lumbar region with (-0.188, p≤.050), dorsal (-0.206, p≤.050), neck (-0.175, p≤.050) and knees (-0.220, p≤.010). It is necessary to improve the working conditions of nurses to reduce the presence of musculoskeletal problems and improve their quality of working life. Copyright © 2016 Elsevier España, S.L.U. All rights reserved.

Effect of specific surface area of MWCNTS on surface roughness and delamination in drilling Epoxy/Glass Fabric Composite

NASA Astrophysics Data System (ADS)

Ponnuvel, S.; Ananth, M. Prem

2018-03-01

In this study the effect of specific surface area of the MWCNTs on the drilled hole qualities was investigated. Epoxy araldite LY556 with hardener HY951 and E-glass coarse plain weave fabric are used for the fabrication of reference material (specimen A). Multi-WalledCarbon Nanotubes (MWCNTs) with diameters <8 nm and 20–30 nm are used for the fabrication of study materials, namely specimen B and specimen C respectively. In specimen B the epoxy resin was filled with MWCNTs having a specific surface area >500 m2 g‑1. MWCNTs in specimen C had a specific surface area >110 m2 g‑1. Drilling experiments were conducted on all the three specimens. Two dimensional delamination factor and the surface roughness of the inner wall of the drilled holes were investigated using Grey Relational Analysis (GRA) and Analysis of variance (ANOVA). Two dimensional delamination factor showed better performance from specimen B and specimen C in comparison with specimen A suggesting improvement in the bonding between epoxy and the glass fiber in the presence of MWCNTs. Similar observations were made for surface roughness of the inner wall of the drilled holes at 1250 rpm. Whereas the presence of MWCNTs (Specimen B and specimen C) produced poor surface finish at 500 rpm in comparison with specimen A. Variations in the hole quality characteristics between specimen B and specimen C was marginal with better observations in specimen C.

Double Q-switch Ho:Sc2SiO5 laser by acousto-optic modulator combined with Cr2+:ZnSe saturable absorber

NASA Astrophysics Data System (ADS)

Yang, Xiao-tao; Zhang, Peng; Xie, Wen-qiang; Li, Lin-jun

2018-01-01

A double Q-switch (DQS) Ho:Sc2SiO5 laser modulated by a acousto-optic modulators (AOM) combined with a Cr2+:ZnSe saturable absorber (SA) was reported for the first time. The actively Q-switch (AQS) and passively Q-switch (PQS) were also studied. For the DQS mode, a maximum average output power of 2.49 W under the incident pump power of 12.5 W was obtained, corresponding to a slope efficiency of 24%. The characteristics of the DQS Ho:SSO laser versus different repetition frequencies (RF) of the AOM were researched. The maximum single-pulse energy of the DQS Ho:SSO laser was calculated to 1.98 mJ. The maximum peak power of the DQS Ho:SSO laser was 49.5 kW. The output beam quality factor M2 of DQS Ho:SSO laser was measured to be 1.15 with the highest peak power by knife-edge method at different positions.

Evaluation of renal oxygen homeostasis in a preclinical animal model to elucidate difference in blood quality after transfusion.

PubMed

Baek, Jin Hyen; Yalamanoglu, Ayla; Moon, So-Eun; Gao, Yamei; Buehler, Paul W

2018-03-01

Red blood cell (RBC) oxygen (O 2 ) delivery may be impacted at the tissue, cellular, and molecular levels after storage duration, preservation strategies, and pathogen reduction. Collectively, the preclinical measurement of arterial and venous PO 2 , systemic blood flow, tissue hypoxia-inducible factors (HIFs), pimonidazole adduction, and erythropoietin (EPO) regulation can serve to elucidate differential RBC quality after storage and processing. Donor guinea pig blood was collected, leukoreduced, and stored at 4°C in AS-3 for 1 (fresh) or 14 (stored) days. RBC variables-2,3-diphosphoglycerate, adenosine triphosphate, hemoglobin, morphology, deformability, and in vivo recovery at 24 hours-were measured at each storage duration. Recipient guinea pigs were exchange transfused until 80% volume replacement was achieved. Arterial and venous blood gases, systemic blood flow, renal HIF-1α and HIF-2α, renal EPO mRNA, plasma EPO, and renal tissue pimonidazole adduction were measured after transfusion. RBC variables declined significantly with storage; however, hemolysis and in vivo recovery remained within the allowable limits for human blood storage. Posttransfusion arterial and venous PO 2 and systemic blood flow decreased, and renal HIFs, EPO mRNA, and pimonidazole adducts increased. Subsequently, EPO accumulated in plasma indicating decreased O 2 availability in the kidneys. Conversely, all variables remained at basal levels in the fresh blood group. The evaluation of renal O 2 homeostasis after transfusion represents an effective approach to defining RBC quality between predicate and novel processing. Methods are adapted from standardized techniques and ideal for preclinical evaluation. Published 2018. This article is a U.S. Government work and is in the public domain in the USA.

Study on the quality assurance of diagnostic X-ray machines and assessment of the absorbed dose to patients

NASA Astrophysics Data System (ADS)

Hassan, G. M.; Rabie, N.; Mustafa, K. A.; Abdel-Khalik, S. S.

2012-09-01

Radiation exposure and image quality in X-ray diagnostic radiology provide a clear understanding of the relationship between the radiation dose delivered to a patient and image quality in optimizing medical diagnostic radiology. Because a certain amount of radiation is unavoidably delivered to patients, this should be as low as reasonably achievable. Several X-ray diagnostic machines were used at different medical diagnostic centers in Egypt for studying the beam quality and the dose delivered to the patient. This article studies the factors affecting the beam quality, such as the kilo-volt peak (kVp), exposure time (mSc), tube current (mAs) and the absorbed dose in (μGy) for different examinations. The maximum absorbed dose measured per mAs was 594±239 and 12.5±3.7 μGy for the abdomen and the chest, respectively, while the absorbed dose at the elbow was 18±6 μGy, which was the minimum dose recorded. The compound and expanded uncertainties accompanying these measurements were 4±0.35% and 8±0.7%, respectively. The measurements were done through quality control tests as acceptance procedures.

Quality of attachment, perinatal risk, and mother-infant interaction in a high-risk premature sample.

PubMed

Udry-Jørgensen, Laura; Pierrehumbert, Blaise; Borghini, Ayala; Habersaat, Stephanie; Forcada-Guex, Margarita; Ansermet, François; Muller-Nix, Carole

2011-05-01

Thirty-three families, each with a premature infant born less than 33 gestational weeks, were observed in a longitudinal exploratory study. Infants were recruited in a neonatal intensive care unit, and follow-up visits took place at 4 months and 12 months of corrected age. The severity of the perinatal problems was evaluated using the Perinatal Risk Inventory (PERI; A.P. Scheiner & M.E. Sexton, 1991). At 4 months, mother-infant play interaction was observed and coded according to the CARE-index (P.M. Crittenden, 2003); at 12 months, the Strange Situation Procedure (SSP; M.D.S. Ainsworth, M.C. Blehar, E. Waters, & S. Wall, 1978) was administered. Results indicate a strong correlation between the severity of perinatal problems and the quality of attachment at 12 months. Based on the PERI, infants with high medical risks more frequently tended to be insecurely attached. There also was a significant correlation between insecure attachment and dyadic play interaction at 4 months (i.e., maternal controlling behavior and infant compulsive compliance). Moreover, specific dyadic interactive patterns could be identified as protective or as risk factors regarding the quality of attachment. Considering that attachment may have long-term influence on child development, these results underline the need for particular attention to risk factors regarding attachment among premature infants. Copyright © 2011 Michigan Association for Infant Mental Health.

Development of a Mammographic Image Processing Environment Using MATLAB.

DTIC Science & Technology

1994-12-01

S. .° : i. .... ...... Correctness Reliability Efficiency Integrity Usability Figure 1.2 - McCall’s software quality factors [ Pressman , 1987] 1.4...quality factors [ Pressman , 1987] 3-13 Each quality factor itself is related to independent attributes called criteria [Cooper and Fisher, 1979], or...metrics by [ Pressman , 1987], that can be used to judge, define, and measure quality [Cooper and Fisher, 1979]. Figure 3.9 shows the criteria that are used

Comparative analysis and assessment of M. tuberculosis H37Rv protein-protein interaction datasets

PubMed Central

2011-01-01

Background M. tuberculosis is a formidable bacterial pathogen. There is thus an increasing demand on understanding the function and relationship of proteins in various strains of M. tuberculosis. Protein-protein interactions (PPIs) data are crucial for this kind of knowledge. However, the quality of the main available M. tuberculosis PPI datasets is unclear. This hampers the effectiveness of research works that rely on these PPI datasets. Here, we analyze the two main available M. tuberculosis H37Rv PPI datasets. The first dataset is the high-throughput B2H PPI dataset from Wang et al’s recent paper in Journal of Proteome Research. The second dataset is from STRING database, version 8.3, comprising entirely of H37Rv PPIs predicted using various methods. We find that these two datasets have a surprisingly low level of agreement. We postulate the following causes for this low level of agreement: (i) the H37Rv B2H PPI dataset is of low quality; (ii) the H37Rv STRING PPI dataset is of low quality; and/or (iii) the H37Rv STRING PPIs are predictions of other forms of functional associations rather than direct physical interactions. Results To test the quality of these two datasets, we evaluate them based on correlated gene expression profiles, coherent informative GO term annotations, and conservation in other organisms. We observe a significantly greater portion of PPIs in the H37Rv STRING PPI dataset (with score ≥ 770) having correlated gene expression profiles and coherent informative GO term annotations in both interaction partners than that in the H37Rv B2H PPI dataset. Predicted H37Rv interologs derived from non-M. tuberculosis experimental PPIs are much more similar to the H37Rv STRING functional associations dataset (with score ≥ 770) than the H37Rv B2H PPI dataset. H37Rv predicted physical interologs from IntAct also show extremely low similarity with the H37Rv B2H PPI dataset; and this similarity level is much lower than that between the S. aureus MRSA252 predicted physical interologs from IntAct and S. aureus MRSA252 pull-down PPIs. Comparative analysis with several representative two-hybrid PPI datasets in other species further confirms that the H37Rv B2H PPI dataset is of low quality. Next, to test the possibility that the H37Rv STRING PPIs are not purely direct physical interactions, we compare M. tuberculosis H37Rv protein pairs that catalyze adjacent steps in enzymatic reactions to B2H PPIs and predicted PPIs in STRING, which shows it has much lower similarities with the B2H PPIs than with STRING PPIs. This result strongly suggests that the H37Rv STRING PPIs more likely correspond to indirect relationships between protein pairs than to B2H PPIs. For more precise support, we turn to S. cerevisiae for its comprehensively studied interactome. We compare S. cerevisiae predicted PPIs in STRING to three independent protein relationship datasets which respectively comprise PPIs reported in Y2H assays, protein pairs reported to be in the same protein complexes, and protein pairs that catalyze successive reaction steps in enzymatic reactions. Our analysis reveals that S. cerevisiae predicted STRING PPIs have much higher similarity to the latter two types of protein pairs than to two-hybrid PPIs. As H37Rv STRING PPIs are predicted using similar methods as S. cerevisiae predicted STRING PPIs, this suggests that these H37Rv STRING PPIs are more likely to correspond to the latter two types of protein pairs rather than to two-hybrid PPIs as well. Conclusions The H37Rv B2H PPI dataset has low quality. It should not be used as the gold standard to assess the quality of other (possibly predicted) H37Rv PPI datasets. The H37Rv STRING PPI dataset also has low quality; nevertheless, a subset consisting of STRING PPIs with score ≥770 has satisfactory quality. However, these STRING “PPIs” should be interpreted as functional associations, which include a substantial portion of indirect protein interactions, rather than direct physical interactions. These two factors cause the strikingly low similarity between these two main H37Rv PPI datasets. The results and conclusions from this comparative analysis provide valuable guidance in using these M. tuberculosis H37Rv PPI datasets in subsequent studies for a wide range of purposes. PMID:22369691

Effectiveness of Six Improved Cookstoves in Reducing Household Air Pollution and Their Acceptability in Rural Western Kenya

PubMed Central

Pilishvili, Tamara; Loo, Jennifer D.; Schrag, Stephanie; Stanistreet, Debbi; Christensen, Bryan; Yip, Fuyuen; Nyagol, Ronald; Quick, Robert; Sage, Mike; Bruce, Nigel

2016-01-01

Background Household air pollution (HAP) from biomass fuel burning is linked to poor health outcomes. Improved biomass cookstoves (ICS) have the potential to improve HAP. Objectives A pre-/post- intervention study assessed the impact of six ICS on indoor air quality and acceptability of ICS to local users in rural Western Kenya. Methods We measured mean personal and kitchen level concentrations of particulate matter <2.5μm in diameter (PM2.5, μg/m3) and carbon monoxide (CO, ppm) during the 48-hour period of each ICS use in 45 households. We compared these levels to those observed with traditional 3-stone fire (TSF) use. We assessed ICS acceptability through interviews and focus groups. We evaluated association of stove type, fuel use, and factors related to cooking practices with mean kitchen PM2.5 and CO using multivariable regression. Results Stove type, exclusive ICS use (vs. concurrent TSF use), and the amount of fuel used were independently associated with kitchen PM2.5 and CO levels. Reductions (95%CI) in mean PM2.5 compared to TSF, ranged by ICS from 11.9% (-2.8–24.5) to 42.3% (32.3–50.8). Reductions in kitchen CO compared to TSF, ranged by ICS from -5.8% (-21.9–8.2) to 34.5% (23.2–44.1). Mean kitchen PM2.5 ranged from 319μg/m3 to 518μg/m3 by ICS. Women thought ICS were easy to use, more efficient, produced less smoke, and cooked faster, compared to TSF. Women also reported limitations for each ICS. Conclusions We documented reductions in HAP from ICS compared to TSF. The PM2.5 levels with ICS use were still considerably higher than WHO indoor air quality guidelines. Achieving maximal potential of ICS requires adherence to more exclusive use and addressing user reported ICS limitations. PMID:27846224

Effectiveness of Six Improved Cookstoves in Reducing Household Air Pollution and Their Acceptability in Rural Western Kenya.

PubMed

Pilishvili, Tamara; Loo, Jennifer D; Schrag, Stephanie; Stanistreet, Debbi; Christensen, Bryan; Yip, Fuyuen; Nyagol, Ronald; Quick, Robert; Sage, Mike; Bruce, Nigel

2016-01-01

Household air pollution (HAP) from biomass fuel burning is linked to poor health outcomes. Improved biomass cookstoves (ICS) have the potential to improve HAP. A pre-/post- intervention study assessed the impact of six ICS on indoor air quality and acceptability of ICS to local users in rural Western Kenya. We measured mean personal and kitchen level concentrations of particulate matter <2.5μm in diameter (PM2.5, μg/m3) and carbon monoxide (CO, ppm) during the 48-hour period of each ICS use in 45 households. We compared these levels to those observed with traditional 3-stone fire (TSF) use. We assessed ICS acceptability through interviews and focus groups. We evaluated association of stove type, fuel use, and factors related to cooking practices with mean kitchen PM2.5 and CO using multivariable regression. Stove type, exclusive ICS use (vs. concurrent TSF use), and the amount of fuel used were independently associated with kitchen PM2.5 and CO levels. Reductions (95%CI) in mean PM2.5 compared to TSF, ranged by ICS from 11.9% (-2.8-24.5) to 42.3% (32.3-50.8). Reductions in kitchen CO compared to TSF, ranged by ICS from -5.8% (-21.9-8.2) to 34.5% (23.2-44.1). Mean kitchen PM2.5 ranged from 319μg/m3 to 518μg/m3 by ICS. Women thought ICS were easy to use, more efficient, produced less smoke, and cooked faster, compared to TSF. Women also reported limitations for each ICS. We documented reductions in HAP from ICS compared to TSF. The PM2.5 levels with ICS use were still considerably higher than WHO indoor air quality guidelines. Achieving maximal potential of ICS requires adherence to more exclusive use and addressing user reported ICS limitations.

Ranking and validation of spallation models for isotopic production cross sections of heavy residua

NASA Astrophysics Data System (ADS)

Sharma, Sushil K.; Kamys, Bogusław; Goldenbaum, Frank; Filges, Detlef

2017-07-01

The production cross sections of isotopically identified residual nuclei of spallation reactions induced by 136Xe projectiles at 500AMeV on hydrogen target were analyzed in a two-step model. The first stage of the reaction was described by the INCL4.6 model of an intranuclear cascade of nucleon-nucleon and pion-nucleon collisions whereas the second stage was analyzed by means of four different models; ABLA07, GEM2, GEMINI++ and SMM. The quality of the data description was judged quantitatively using two statistical deviation factors; the H-factor and the M-factor. It was found that the present analysis leads to a different ranking of models as compared to that obtained from the qualitative inspection of the data reproduction. The disagreement was caused by sensitivity of the deviation factors to large statistical errors present in some of the data. A new deviation factor, the A factor, was proposed, that is not sensitive to the statistical errors of the cross sections. The quantitative ranking of models performed using the A-factor agreed well with the qualitative analysis of the data. It was concluded that using the deviation factors weighted by statistical errors may lead to erroneous conclusions in the case when the data cover a large range of values. The quality of data reproduction by the theoretical models is discussed. Some systematic deviations of the theoretical predictions from the experimental results are observed.

Characterization, sources and health risk analysis of PM2.5 bound metals during foggy and non-foggy days in sub-urban atmosphere of Agra

NASA Astrophysics Data System (ADS)

Agarwal, Awni; Mangal, Ankita; Satsangi, Aparna; Lakhani, Anita; Maharaj Kumari, K.

2017-11-01

A study was conducted at a campus site of Agra to determine the metals in fine mode particles (PM2.5) and assess their associated health effects in adults and children during the period from 7th December 2015 to 17th February 2016. PM2.5 mass concentrations (190 μg/m3 and 132 μg/m3) exceeded the air quality standards of India by a factor of 3.2 and 2.2 during the foggy and non-foggy days, respectively. Total concentration varied from 11.9 μg/m3 to 40.6 μg/m3 during the fog period and from 5.7 μg/m3 to 25.8 μg/m3 during the non-foggy period for seventeen metals (including metals with concentration > 1 μg/m3, 0.1-1 μg/m3, 0.01-0.1 μg/m3 and < 0.01 μg/m3) with maximum contribution from K and minimum from Co. At this site in winter, coal and biomass combustion, vehicular emissions, crustal dust and iron producing industrial processes were identified as the major contributors to metals as determined by correlation analysis and Principal Component Analysis. Cr and Mn showed the highest carcinogenic and non-carcinogenic risks. Cumulated non-carcinogenic risk in children (HI: 3.90 for foggy days; HI: 2.74 for non-foggy days) was higher compared to the adults (HI: 1.81 for foggy days; HI: 1.29 for non-foggy days) during both periods while the cumulated effect of carcinogenic risk was higher for adults (ILCR: 2.25E - 04) than for children (ILCR: 1.31E - 04).

Calibrating an optical scanner for quality assurance of large area radiation detectors

NASA Astrophysics Data System (ADS)

Karadzhinova, A.; Hildén, T.; Berdova, M.; Lauhakangas, R.; Heino, J.; Tuominen, E.; Franssila, S.; Hæggström, E.; Kassamakov, I.

2014-11-01

A gas electron multiplier (GEM) is a particle detector used in high-energy physics. Its main component is a thin copper-polymer-copper sandwich that carries Ø =70  ±  5 µm holes. Quality assurance (QA) is needed to guarantee both long operating life and reading fidelity of the GEM. Absence of layer defects and conformity of the holes to specifications is important. Both hole size and shape influence the detector’s gas multiplication factor and hence affect the collected data. For the scanner the required lateral measurement tolerance is ± 5 µm. We calibrated a high aspect ratio optical scanning system (OSS) to allow ensuring the quality of large GEM foils. For the calibration we microfabricated transfer standards, which were imaged with the OSS and which were compared to corresponding scanning electron microscopy (SEM) images. The calibration fulfilled the ISO/IEC 17025 and UKAS M3003 requirements: the calibration factor was 1.01  ±  0.01, determined at 95% confidence level across a 950  ×  950 mm2 area. The proposed large-scale scanning technique can potentially be valuable in other microfabricated products too.

Improved fat-suppression homogeneity with mDIXON turbo spin echo (TSE) in pediatric spine imaging at 3.0 T.

PubMed

Pokorney, Amber L; Chia, Jonathan M; Pfeifer, Cory M; Miller, Jeffrey H; Hu, Houchun H

2017-11-01

Background Robust fat suppression remains essential in clinical MRI to improve tissue signal contrast, minimize fat-related artifacts, and enhance image quality. Purpose To compare fat suppression between mDIXON turbo spin echo (TSE) and conventional frequency-selective and inversion-recovery methods in pediatric spine MRI. Material and Methods Images from T1-weighted (T1W) and T2-weighted (T2W) TSE sequences coupled with conventional methods and the mDIXON technique were compared in 36 patients (5.8 ± 5.4 years) at 3.0 T. Images from 42 pairs of T1W (n = 16) and T2W (n = 26) scans were acquired. Two radiologists reviewed the data and rated images using a three-point scale in two categories, including the uniformity of fat suppression and overall diagnostic image quality. The Wilcoxon rank-sum test was used to compare the scores. Results The Cohen's kappa coefficient for inter-rater agreement was 0.69 (95% confidence interval [CI], 0.56-0.83). Images from mDIXON TSE were considered superior in fat suppression ( P < 0.01) in 22 (rater 1) and 25 (rater 2) cases, respectively. In 13 (rater 1) and 11 (rater 2) cases, mDIXON TSE demonstrated improved diagnostic image quality ( P < 0.01). In three cases, fat suppression was superior using inversion-recovery and likewise in one case mDIXON had poorer image diagnostic quality. Lastly, mDIXON and conventional fat-suppression methods performed similarly in 17 (rater 1) and 14 (rater 2) cases, and yielded equal diagnostic image quality in 28 (rater 1) and 30 (rater 2) cases. Conclusion Robust fat suppression can be achieved with mDixon TSE pediatric spine imaging at 3.0 T and should be considered as a permanent replacement of traditional methods, in particular frequency-selective techniques.

Effect of Environmental Factors on Cyanobacterial Abundance and Cyanotoxins Production in Natural and Drinking Water, Bangladesh.

PubMed

Affan, Abu; Khomavis, Hisham S; Al-Harbi, Salim Marzoog; Haque, Mahfuzul; Khan, Saleha

2015-02-01

Cyanobacterial blooms commonly appear during the summer months in ponds, lakes and reservoirs in Bangladesh. In these areas, fish mortality, odorous water and fish and human skin irritation and eye inflammation have been reported. The influence of physicochemical factors on the occurrence of cyanobacteria and its toxin levels were evaluated in natural and drinking water in Bangladesh. A highly sensitive immunosorbent assay was used to detect microcystins (MCs). Cyanobacteria were found in 22 of 23 samples and the dominant species were Microcystis aeruginosa, followed by Microcystisflosaquae, Anabeana crassa and Aphanizomenon flosaquae. Cyanobacterial abundance varied from 39 to 1315 x 10(3) cells mL(-1) in natural water and 31 to 49 x 10(3) cells mL(-1) in tap water. MC concentrations were 25-82300 pg mL(-1) with the highest value measured in the fish research pond, followed by Ishakha Lake. In tap water, MC concentrations ranged from 30-32 pg mL(-1). The correlation between nitrate-nitrogen (NO3-N) concentration and cyanobacterial cell abundance was R2 = 0.62 while that between cyanobacterial abundance and MC concentration was R2 = 0.98. The increased NO3-N from fish feed, organic manure, poultry and dairy farm waste and fertilizer from agricultural land eutrophicated the water bodies and triggered cyanobacterial bloom formation. The increased amount of cyanobacteria produced MCs, subsequently reducing the water quality.

Sub-100 μm scale on-chip inductors with CoZrTa for GHz applications

NASA Astrophysics Data System (ADS)

Xu, Wei; Wu, Hao; Gardner, Donald S.; Sinha, Saurabh; Dastagir, Tawab; Bakkaloglu, Bertan; Cao, Yu; Yu, Hongbin

2011-04-01

On-chip inductors with magnetic material are fabricated with complementary metal-oxide semiconductor processes. The inductors use copper metallization and amorphous CoZrTa thinfilms. Enhancements of 3.5X in inductance and 3X for the quality factor at frequencies as highas 3 GHz have been successfully demonstrated by using a continuous CoZrTa-ring structure in spiral inductors at the 100 μm scale. Further improvement of the frequency response of inductance up to 6 GHz was achieved by micro-patterning the magnetic film. The effect ofincreasing the film thickness on the performance of strip line inductors was measured and modeled. This work demonstrates significantly larger increases in inductance and quality factor atabove 1 GHz as compared to prior efforts, thereby making the added processing cost worthwhile.

Voice quality after treatment of early vocal cord cancer: a randomized trial comparing laser surgery with radiation therapy.

PubMed

Aaltonen, Leena-Maija; Rautiainen, Noora; Sellman, Jaana; Saarilahti, Kauko; Mäkitie, Antti; Rihkanen, Heikki; Laranne, Jussi; Kleemola, Leenamaija; Wigren, Tuija; Sala, Eeva; Lindholm, Paula; Grenman, Reidar; Joensuu, Heikki

2014-10-01

Early laryngeal cancer is usually treated with either transoral laser surgery or radiation therapy. The quality of voice achieved with these treatments has not been compared in a randomized trial. Male patients with carcinoma limited to 1 mobile vocal cord (T1aN0M0) were randomly assigned to receive either laser surgery (n=32) or external beam radiation therapy (n=28). Surgery consisted of tumor excision with a CO2 laser with the patient under general anaesthesia. External beam radiation therapy to the larynx was delivered to a cumulative dose of 66 Gy in 2-Gy daily fractions over 6.5 weeks. Voice quality was assessed at baseline and 6 and 24 months after treatment. The main outcome measures were expert-rated voice quality on a grade, roughness, breathiness, asthenia, and strain (GRBAS) scale, videolaryngostroboscopic findings, and the patients' self-rated voice quality and its impact on activities of daily living. Overall voice quality between the groups was rated similar, but voice was more breathy and the glottal gap was wider in patients treated with laser surgery than in those who received radiation therapy. Patients treated with radiation therapy reported less hoarseness-related inconvenience in daily living 2 years after treatment. Three patients in each group had local cancer recurrence within 2 years from randomization. Radiation therapy may be the treatment of choice for patients whose requirements for voice quality are demanding. Overall voice quality was similar in both treatment groups, however, indicating a need for careful consideration of patient-related factors in the choice of a treatment option. Copyright © 2014 Elsevier Inc. All rights reserved.

Diet quality, physical activity, smoking status, and weight fluctuation are associated with weight change in women and men.

PubMed

Kimokoti, Ruth W; Newby, P K; Gona, Philimon; Zhu, Lei; Jasuja, Guneet K; Pencina, Michael J; McKeon-O'Malley, Catherine; Fox, Caroline S; D'Agostino, Ralph B; Millen, Barbara E

2010-07-01

The effect of diet quality on weight change, relative to other body weight determinants, is insufficiently understood. Furthermore, research on long-term weight change in U.S. adults is limited. We evaluated prospectively patterns and predictors of weight change in Framingham Offspring/Spouse (FOS) women and men (n = 1515) aged > or =30 y with BMI > or = 18.5 kg/m2 and without cardiovascular disease, diabetes, and cancer at baseline over a 16-y period. Diet quality was assessed using the validated Framingham Nutritional Risk Score. In women, older age (P < 0.0001) and physical activity (P < 0.05) were associated with lower weight gain. Diet quality interacted with former smoking status (P-interaction = 0.02); former smokers with lower diet quality gained an additional 5.2 kg compared with those with higher diet quality (multivariable-adjusted P-trend = 0.06). Among men, older age (P < 0.0001) and current smoking (P < 0.01) were associated with lower weight gain, and weight fluctuation (P < 0.01) and former smoking status (P < 0.0001) were associated with greater weight gain. Age was the strongest predictor of weight change in both women (partial R(2) = 11%) and men (partial R(2) = 8.6%). Normal- and overweight women gained more than obese women (P < 0.05) and younger adults gained more weight than older adults (P < 0.0001). Patterns and predictors of weight change differ by sex. Age in both sexes and physical activity among women as well as weight fluctuation and smoking status in men were stronger predictors of weight change than diet quality among FOS adults. Women who stopped smoking over follow-up and had poor diet quality gained the most weight. Preventive interventions need to be sex-specific and consider lifestyle factors.

Voice Quality After Treatment of Early Vocal Cord Cancer: A Randomized Trial Comparing Laser Surgery With Radiation Therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aaltonen, Leena-Maija, E-mail: leena-maija.aaltonen@hus.fi; Rautiainen, Noora; Sellman, Jaana

Objective: Early laryngeal cancer is usually treated with either transoral laser surgery or radiation therapy. The quality of voice achieved with these treatments has not been compared in a randomized trial. Methods and Materials: Male patients with carcinoma limited to 1 mobile vocal cord (T1aN0M0) were randomly assigned to receive either laser surgery (n=32) or external beam radiation therapy (n=28). Surgery consisted of tumor excision with a CO{sub 2} laser with the patient under general anaesthesia. External beam radiation therapy to the larynx was delivered to a cumulative dose of 66 Gy in 2-Gy daily fractions over 6.5 weeks. Voice quality wasmore » assessed at baseline and 6 and 24 months after treatment. The main outcome measures were expert-rated voice quality on a grade, roughness, breathiness, asthenia, and strain (GRBAS) scale, videolaryngostroboscopic findings, and the patients' self-rated voice quality and its impact on activities of daily living. Results: Overall voice quality between the groups was rated similar, but voice was more breathy and the glottal gap was wider in patients treated with laser surgery than in those who received radiation therapy. Patients treated with radiation therapy reported less hoarseness-related inconvenience in daily living 2 years after treatment. Three patients in each group had local cancer recurrence within 2 years from randomization. Conclusions: Radiation therapy may be the treatment of choice for patients whose requirements for voice quality are demanding. Overall voice quality was similar in both treatment groups, however, indicating a need for careful consideration of patient-related factors in the choice of a treatment option.« less

Sleep and Depression in Postpartum Women: A Population-Based Study

PubMed Central

Dørheim, Signe Karen; Bondevik, Gunnar Tschudi; Eberhard-Gran, Malin; Bjorvatn, Bjørn

2009-01-01

Study Objectives: (1) To describe the prevalence of and risk factors for postpartum maternal sleep problems and depressive symptoms simultaneously, (2) identify factors independently associated with either condition, and (3) explore associations between specific postpartum sleep components and depression. Design: Cross-sectional. Setting: Population-based. Participants: All women (n = 4191) who had delivered at Stavanger University Hospital from October 2005 to September 2006 were mailed a questionnaire seven weeks postpartum. The response rate was 68% (n = 2830). Interventions: None. Measurements and results: Sleep was measured using the Pittsburgh Sleep Quality Index (PSQI), and depressive symptoms using the Edinburgh Postnatal Depression Scale (EPDS). The prevalence of sleep problems, defined as PSQI > 5, was 57.7%, and the prevalence of depression, defined as EPDS ≥ 10, was 16.5%. The mean self-reported nightly sleep duration was 6.5 hours and sleep efficiency 73%. Depression, previous sleep problems, being primiparous, not exclusively breastfeeding, or having a younger or male infant were factors associated with poor postpartum sleep quality. Poor sleep was also associated with depression when adjusted for other significant risk factors for depression, such as poor partner relationship, previous depression, depression during pregnancy and stressful life events. Sleep disturbances and subjective sleep quality were the aspects of sleep most strongly associated with depression. Conclusions: Poor sleep was associated with depression independently of other risk factors. Poor sleep may increase the risk of depression in some women, but as previously known risk factors were also associated, mothers diagnosed with postpartum depression are not merely reporting symptoms of chronic sleep deprivation. Citation: Dørheim SK; Bondevik GT; Eberhard-Gran M; Bjorvatn B. Sleep and depression in postpartum women: a population-based study. SLEEP 2009;32(7):847-855. PMID:19639747

Cell plasticity in wound healing: paracrine factors of M1/ M2 polarized macrophages influence the phenotypical state of dermal fibroblasts

PubMed Central

2013-01-01

Background Macrophages and fibroblasts are two major players in tissue repair and fibrosis. Despite the relevance of macrophages and fibroblasts in tissue homeostasis, remarkably little is known whether macrophages are able to influence the properties of fibroblasts. Here we investigated the role of paracrine factors secreted by classically activated (M1) and alternatively activated (M2) human macrophages on human dermal fibroblasts (HDFs). Results HDFs stimulated with paracrine factors from M1 macrophages showed a 10 to > 100-fold increase in the expression of the inflammatory cytokines IL6, CCL2 and CCL7 and the matrix metalloproteinases MMP1 and MMP3. This indicates that factors produced by M1 macrophages induce a fibroblast phenotype with pro-inflammatory and extracellular matrix (ECM) degrading properties. HDFs stimulated with paracrine factors secreted by M2 macrophages displayed an increased proliferation rate. Interestingly, the M1-activated pro-inflammatory fibroblasts downregulated, after exposure to paracrine factors produced by M2 macrophages or non-conditioned media, the inflammatory markers as well as MMPs and upregulated their collagen production. Conclusions Paracrine factors of M1 or M2 polarized macrophages induced different phenotypes of HDFs and the HDF phenotypes can in turn be reversed, pointing to a high dynamic plasticity of fibroblasts in the different phases of tissue repair. PMID:23601247

Effect of Two-Step Metal Organic Chemical Vapor Deposition Growth on Quality, Diameter and Density of InAs Nanowires on Si (111) Substrate

NASA Astrophysics Data System (ADS)

Yu, Hung Wei; Anandan, Deepak; Hsu, Ching Yi; Hung, Yu Chih; Su, Chun Jung; Wu, Chien Ting; Kakkerla, Ramesh Kumar; Ha, Minh Thien Huu; Huynh, Sa Hoang; Tu, Yung Yi; Chang, Edward Yi

2018-02-01

High-density (˜ 80/um2) vertical InAs nanowires (NWs) with small diameters (˜ 28 nm) were grown on bare Si (111) substrates by means of two-step metal organic chemical vapor deposition. There are two critical factors in the growth process: (1) a critical nucleation temperature for a specific In molar fraction (approximately 1.69 × 10-5 atm) is the key factor to reduce the size of the nuclei and hence the diameter of the InAs NWs, and (2) a critical V/III ratio during the 2nd step growth will greatly increase the density of the InAs NWs (from 45 μm-2 to 80 μm-2) and at the same time keep the diameter small. The high-resolution transmission electron microscopy and selected area diffraction patterns of InAs NWs grown on Si exhibit a Wurtzite structure and no stacking faults. The observed longitudinal optic peaks in the Raman spectra were explained in terms of the small surface charge region width due to the small NW diameter and the increase of the free electron concentration, which was consistent with the TCAD program simulation of small diameter (< 40 nm) InAs NWs.

Quantifying short-term and long-term health benefits of attaining ambient fine particulate pollution standards in Guangzhou, China

NASA Astrophysics Data System (ADS)

Lin, Hualiang; Liu, Tao; Xiao, Jianpeng; Zeng, Weilin; Li, Xing; Guo, Lingchuan; Xu, Yanjun; Zhang, Yonghui; Vaughn, Michael G.; Nelson, Erik J.; Qian, Zhengmin (Min); Ma, Wenjun

2016-07-01

In 2012, Chinese Environmental Bureau modified its National Ambient Air Quality Standards to include fine particulate matter (PM2.5). Recent air pollution monitoring data shows that numerous locations have exceeded this standard, which may have resulted in avoidable adverse health effects. For example, among the 74 Chinese cities with PM2.5 monitoring data in 2013, only three cities attained the annual air quality standard (35 μg/m3). This study aimed to quantify the potential short- and long-term health benefits from achieving the Chinese ambient air quality standard and WHO's air quality objectives. A generalized additive model was used to estimate the short-term association of mortality with changes in daily PM2.5 concentrations, based on which we estimated the potential premature mortality reduction that would have been achieved during the period of 2012-2015 if the daily air quality standard had been met in Guangzhou, China; we also estimated the avoidable deaths if attaining the annual air quality standard using the relative risk obtained from a previous cohort study. During the study period, there were 160 days exceeding the national daily PM2.5 standard (75 μg/m3) in Guangzhou, and the annual average concentration (47.7 μg/m3) was higher than the air quality standard of 35 μg/m3. Significant associations between PM2.5 and mortality were observed. An increase of 10 μg/m3 in PM2.5 was associated with increases in daily death counts of 0.95% (95% CI: 0.56%, 1.34%) in natural mortality, 1.31% (95% CI: 0.75%, 1.87%) in cardiovascular mortality, and 1.06% (95% CI: 0.19%, 1.94%) in respiratory mortality. The health benefits of attaining the national daily air quality standard of PM2.5 (75 μg/m3) would have prevented 143 [95% confidence interval (CI): 84, 203] fewer natural deaths, including 84 (95% CI: 48, 121) fewer cardiovascular deaths and 27 (95% CI: 5, 49) fewer respiratory deaths. Had the annual PM2.5 levels been reduced to 35 μg/m3, an estimated 3875 (95% CI: 1852, 6074) natural deaths, 2378 (95% CI: 800, 4230) cardiovascular deaths, and 227 (95% CI: -437, 1033) respiratory deaths could have been prevented. Even greater substantial mortality reductions could be achieved if the WHO's air quality objectives were met. Our study suggests that air pollution is significantly associated with mortality in Guangzhou, and more stringent air quality standards would significantly reduce air pollution-related premature mortality.

Effects of early life factors on the health and quality of life of older adults.

PubMed

Yilmaz, Fikriye; N Tekin, Rukiye

2018-01-01

Few studies on the effects of early life factors on the health and quality of life of adults have been conducted in Turkey. We aimed to investigate the effects of early life factors on the health and quality of life of older adults. We administered a questionnaire to 350 adults, aged 50-89 years, living in Cankaya, Ankara. The questionnaire covered sociodemographic characteristics, early life characteristics, health status, and the World Health Organization Quality of Life-Ageing scale. Data were analyzed using χ 2 tests, independent samples t-tests, one-way anova, and binary logistic regression analysis. The analyses showed that the most important risk factors for chronic disease were being ≥65 years (odds ratio (OR) = 2.34), having a chronic health problem before 18 years of age (OR = 2.48), experiencing prolonged hospitalization or bed rest before 18 years of age (OR = 2.65), and experiencing parental unconcern during early life (OR = 2.13) (P < 0.05). In addition, having a high school education or less includes people who have primary or secondary or high school diploma (OR = 1.65), having lived in a village (OR = 1.65), having a low family economic status (OR = 2.40), and having experienced one negative event (OR = 1.41) or two or more negative events (OR = 1.39) during their early lives were identified as important risk factors for low quality of life (P < 0.05). Early life factors are among the important determinants of the health and quality of life of older adults in Turkey. © 2017 Japanese Psychogeriatric Society.

Attenuation of Lg waves in the New Madrid seismic zone of the central United States using the coda normalization method

NASA Astrophysics Data System (ADS)

Nazemi, Nima; Pezeshk, Shahram; Sedaghati, Farhad

2017-08-01

Unique properties of coda waves are employed to evaluate the frequency dependent quality factor of Lg waves using the coda normalization method in the New Madrid seismic zone of the central United States. Instrument and site responses are eliminated and source functions are isolated to construct the inversion problem. For this purpose, we used 121 seismograms from 37 events with moment magnitudes, M, ranging from 2.5 to 5.2 and hypocentral distances from 120 to 440 km recorded by 11 broadband stations. A singular value decomposition (SVD) algorithm is used to extract Q values from the data, while the geometric spreading exponent is assumed to be a constant. Inversion results are then fitted with a power law equation from 3 to 12 Hz to derive the frequency dependent quality factor function. The final results of the analysis are QVLg (f) = (410 ± 38) f0.49 ± 0.05 for the vertical component and QHLg (f) = (390 ± 26) f0.56 ± 0.04 for the horizontal component, where the term after ± sign represents one standard error. For stations within the Mississippi embayment with an average sediment depth of 1 km around the Memphis metropolitan area, estimation of quality factor using the coda normalization method is not well-constrained at low frequencies (f < 3 Hz). There may be several reasons contributing to this issue, such as low frequency surface wave contamination, site effects, or even a change in coda wave scattering regime which can exacerbate the scatter of the data.

Absolute calibration of sniffer probes on Wendelstein 7-X

NASA Astrophysics Data System (ADS)

Moseev, D.; Laqua, H. P.; Marsen, S.; Stange, T.; Braune, H.; Erckmann, V.; Gellert, F.; Oosterbeek, J. W.

2016-08-01

Here we report the first measurements of the power levels of stray radiation in the vacuum vessel of Wendelstein 7-X using absolutely calibrated sniffer probes. The absolute calibration is achieved by using calibrated sources of stray radiation and the implicit measurement of the quality factor of the Wendelstein 7-X empty vacuum vessel. Normalized absolute calibration coefficients agree with the cross-calibration coefficients that are obtained by the direct measurements, indicating that the measured absolute calibration coefficients and stray radiation levels in the vessel are valid. Close to the launcher, the stray radiation in the empty vessel reaches power levels up to 340 kW/m2 per MW injected beam power. Furthest away from the launcher, i.e., half a toroidal turn, still 90 kW/m2 per MW injected beam power is measured.

Absolute calibration of sniffer probes on Wendelstein 7-X.

PubMed

Moseev, D; Laqua, H P; Marsen, S; Stange, T; Braune, H; Erckmann, V; Gellert, F; Oosterbeek, J W

2016-08-01

Here we report the first measurements of the power levels of stray radiation in the vacuum vessel of Wendelstein 7-X using absolutely calibrated sniffer probes. The absolute calibration is achieved by using calibrated sources of stray radiation and the implicit measurement of the quality factor of the Wendelstein 7-X empty vacuum vessel. Normalized absolute calibration coefficients agree with the cross-calibration coefficients that are obtained by the direct measurements, indicating that the measured absolute calibration coefficients and stray radiation levels in the vessel are valid. Close to the launcher, the stray radiation in the empty vessel reaches power levels up to 340 kW/m(2) per MW injected beam power. Furthest away from the launcher, i.e., half a toroidal turn, still 90 kW/m(2) per MW injected beam power is measured.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moseev, D., E-mail: dmitry.moseev@ipp.mpg.de; Laqua, H. P.; Marsen, S.

Here we report the first measurements of the power levels of stray radiation in the vacuum vessel of Wendelstein 7-X using absolutely calibrated sniffer probes. The absolute calibration is achieved by using calibrated sources of stray radiation and the implicit measurement of the quality factor of the Wendelstein 7-X empty vacuum vessel. Normalized absolute calibration coefficients agree with the cross-calibration coefficients that are obtained by the direct measurements, indicating that the measured absolute calibration coefficients and stray radiation levels in the vessel are valid. Close to the launcher, the stray radiation in the empty vessel reaches power levels up tomore » 340 kW/m{sup 2} per MW injected beam power. Furthest away from the launcher, i.e., half a toroidal turn, still 90 kW/m{sup 2} per MW injected beam power is measured.« less

A standardized technique of systematic mediastinal lymph node dissection by video-assisted thoracoscopic surgery (VATS) leads to a high rate of nodal upstaging in early-stage non-small cell lung cancer.

PubMed

Reichert, Martin; Steiner, Dagmar; Kerber, Stefanie; Bender, Julia; Pösentrup, Bernd; Hecker, Andreas; Bodner, Johannes

2016-03-01

A substantial part of the oncologic surgical procedure in non-small cell lung cancer (NSCLC) is systematic lymph node dissection (sLND). However, controversies still exist regarding the quality of minimally invasive (video-assisted thoracoscopic surgery, VATS) sLND in oncologic resections. The rate of stage migration from clinical to pathological N-status has been discussed as one parameter for the quality of sLND. Between March 2011 and May 2014, seventy-seven patients (62 male, 15 female) were scheduled for anatomical lung resection and sLND by VATS for clinical stage I (UICC 7th edition) NSCLC. Preoperative staging was performed by [18F]-fluorodesoxyglucose positron emission tomography with computed tomography (FDG-PET/CT). Patient data were retrospectively analyzed with regard to divergence in clinical and pathological N-factor. FDG-PET/CTs of patients with lymph node (LN) upstaging after VATS resections were blindly re-evaluated by an experienced radiologist. In FDG-PET/CT, preoperative tumor stage was cT1N0M0 in 41 (53.2%) and cT2aN0M0 in 28 (36.4%) patients. In six (7.8%) patients the primary tumor was not suspicious for malignancy, and in two (2.6%) patients the tumor was not evaluable due to prior wedge resection before FDG-PET/CT. Thirty-one (40.3%) left-sided and 46 (59.7%) right-sided pulmonary resections with sLND were performed; 19.57 ± 0.99 LNs were dissected. In 13 (16.9%) patients a nodal stage migration from preoperative clinical to postoperative pathological N-stage was observed [cN0 to pN1 in 9 (11.7%) and cN0 to pN2 in 4 (5.2%) cases]. In correlation to the clinical T-factor, the rate of N-factor upstaging for cT1 was 12.2% and for cT2a was 28.6%, respectively. In 50% of the patients with postoperative nodal staging shift, no changes were observed on re-evaluation of the preoperative FDG-PET/CT. In this series of clinical stage I NSCLC patients, the rate of nodal stage migration after sLND by VATS is higher than previously reported. Prospective randomized controlled trials are needed to prove the oncologic quality of a sLND by VATS versus standard open approach.

Improved power and efficiency for tapered lasers with optimized photonic crystal structures

NASA Astrophysics Data System (ADS)

Ma, Xiaolong; Qu, Hongwei; Zhao, Shaoyu; Zhou, Xuyan; Lin, Yuzhe; Zheng, Wanhua

2017-10-01

High power and high beam quality laser sources are required in numerous applications such as nonlinear frequency conversion, optical pumping of solid-state and fiber lasers, material processing and others. Tapered lasers can provide a high output power while keeping a high beam quality. However, the conventional tapered lasers suffer from a large vertical beam divergence. We have demonstrated 2-mm long tapered lasers with photonic crystal structures. A high beam quality and a narrow vertical divergence are achieved. In this paper, we optimized the photonic crystal structure and fabricated a 4-mm long tapered laser to further increase the output power and the wall-plug efficiency. Compared with our precious wafer, the optimized structure has a lower doping level to reduce the internal loss. The period of the photonic crystal structure and the thickness of the upper cladding are also reduced. The device has a 1-mm long ridge-waveguide section and a 3-mm long tapered section. The taper angle is 4°. An output power of 7.3 W is achieved with a peak wall-plug efficiency of 46% in continuous-wave mode. The threshold current is around 500 mA and the slope efficiency is 0.93 W/A. In pulsed mode, the output power is 15.6 W and the maximum wall-plug efficiency is 48.1%. The far-field divergence with full width at half maximum is 6.3° for the lateral direction at 3 A. The vertical far-field beam divergence is around 11° at different injection levels. High beam qualities are demonstrated by beam quality factor M2 of 1.52 for the lateral direction and 1.54 for the vertical direction.

High average-power 2 μm radiation generated by intracavity KTP OPO

NASA Astrophysics Data System (ADS)

He, Guangyuan; Guo, Jing; Jiao, Zhongxing; Wang, Biao

2015-09-01

A high average-power 2 μm laser with good beam quality based on an intracavity potassium titanium oxide phosphate (KTP) optical parametric oscillator (OPO) is demonstrated. A concave lens is used in the 1064 nm Nd:YAG pumped laser cavity to compensate for the thermal lensing of the laser rod. The cavity length of the KTP OPO is enlarged to improve the 2 μm beam quality. The maximum average output of the 2 μm laser is up to 18 W at 7 kHz with M 2 less than 6 and pulse width of 70 ns. The FWHM of the signal and idle lights are both less than 3 nm.

Air quality modeling for effective environmental management in the mining region.

PubMed

Asif, Zunaira; Chen, Zhi; Han, Yi

2018-04-18

Air quality in the mining sector is a serious environmental concern and associated with many health issues. The air quality management in mining region has been facing many challenges due to lack of understanding of atmospheric factors and physical removal mechanism. A modeling approach called mining air dispersion model (MADM) is developed to predict air pollutants concentration in the mining region while considering the deposition effect. The model is taken into account through the planet's boundary conditions and assuming that the eddy diffusivity depends on the downwind distance. The developed MADM is applied to a mining site in Canada. The model provides values as the predicted concentrations of PM 10 , PM 2.5 , TSP, NO 2 and six heavy metals (As, Pb, Hg, Cd, Zn, Cr) at various receptor locations. The model shows that neutral stability conditions are dominant for the study site. The maximum mixing height is achieved (1280 m) during the evening of summer, and minimum mixing height (380 m) is attained during the evening of winter. The dust fall (PM coarse) deposition flux is maximum during February and March with the deposition velocity of 4.67 cm/s. The results are evaluated with the monitoring field values, revealing a good agreement for the target air pollutants with R-squared ranging from 0.72 to 0.96 for PM 2.5 ; 0.71 to 0.82 for PM 10 and from 0.71 to 0.89 for NO 2 . The analyses illustrate that presented algorithm in this model can be used to assess air quality for the mining site in a systematic way. The comparison of MADM and CALPUFF modeling values are made for four different pollutants (PM 2.5 , PM 10 , TSP, and NO 2 ) under three different atmospheric stability classes (stable, neutral and unstable). Further, MADM results are statistically tested against CALPUFF for the air pollutants and model performance is found satisfactory.

[Factors predictive of good motivation to quit smoking among Moroccan smokers attending a lung disease outpatient clinic in 2008].

PubMed

Bouaïti, E; Mzouri, M; Sbaï-Idrissi, K; Razine, R; Kassouati, J; Lamrabet, M; Hassouni, F; Ouaaline, M; Benbrahim, N Fikri

2010-02-01

Motivations for cessation of smoking should be studied to determine which factors have an impact. Educational messages can then be developed to help smokers become more successful in adopting healthy behavior. The objective of our work was to determine the factors influencing the quality of motivation for smoking cessation among patients attending a lung disease clinic. Between March and June 2008, patients attending the outpatient clinical of the Moulay Youssef Hospital Department of Pneumology in Rabat were studied. Data on the smoking status and motivation to stop smoking (Richmond's test) were collected using a standardized questionnaire. A logistic regression model was developed to analyze the quality of their motivation to quit smoking. The median age for smoking the first cigarette was low (<20 years); pharmacological dependence on nicotine was low (Fagerström score<8 in 71.8%). More than a third of patients (36.6%) had already intended to cease smoking. According to the Richmond test, only 46.0% were well motivated (score>or=8). At multivariate analysis, factors predictive of a good motivation to quit smoking were a previous attempt to stop smoking (OR=5.4 [2.5-11.7]), severe disease (OR=3.7 [1.6-8.2]). Beginning the tobacco addiction before the age of 18 years was predictive of poor motivation (OR=2.7 [1.4-5.3]). Our investigation provides evidence in favor of searching for different factors which might affect motivation to stop smoking among patients seeking care in a lung disease clinic. Lung specialists, who manage the large majority of these patients should be particularly active in this area.

Evaluation of the Impact of Indoor Smoking Bans on Air Quality in Australian Licensed Clubs

NASA Astrophysics Data System (ADS)

Davidson, Margaret Elissa

The quality of indoor air in Australian buildings is unknown due to limited published data. The assessment of indoor air quality (IAQ) in hospitality environments is of special concern because they are frequented by sensitive populations such as the elderly, children, and people with pre-existing health conditions, who may be at risk of developing adverse health reactions if the IAQ is poor. As of 2010, all Australian states and territories have introduced legalisation banning smoking in enclosed public places, including licensed clubs. This project has evaluated the impact of indoor smoking bans on air quality inside and outside of Australian licensed clubs. In doing this it has identified emerging IAQ issues in post smoking ban environments, and documented the airborne concentrations of previously unstudied air contaminants such as particulate matter with a 50% cut-point diameter of 1.0 ?m (PM1.0) and particulate polycyclic aromatic hydrocarbons (PPAH) in the indoor smoking areas of Australian licensed clubs. The study involved collecting approximately 400 hours of air quality data, of which 200 hours was collected before bans and 200 hrs was collected after smoking bans were introduced in licensed clubs located within two local government districts of South Eastern Australia. Clubs 1 to 7 were located in the one district and Clubs 8 to 11 in the other district. Club 4 dropped out following the pre ban monitoring, and the results were omitted from analysis. The air quality parameters measured inside include particulate matter with a 50% cut-point diameter of 2.5 mum (PM2.5), PPAH, carbon monoxide (CO), carbon dioxide mu(CO2), temperature and humidity. The air quality parameters measured outside were PM2.5, CO2, temperature and humidity. Each of the parameters were monitored for 4 hour periods on 4 occasions in each club both before, and after the introduction of indoor smoking bans. Additional monitoring of indoor concentrations of PM1.0, nicotine and PM2.5 particulates with a special calibration factor for environmental tobacco smoke calibration factor of 0.32 (PM2.5 (0.32)) was undertaken in the second group of clubs and monthly monitoring following the bans was undertaken in Clubs 9 and 11. There was a significant reduction in the mean airborne concentrations of PM2.5, PM1.0, PM2.5 (0.32), PPAH, CO and nicotine at all clubs following the implementation of the smoking bans. Of note was the increase in the mean outdoor PM2.5 concentrations at 6 clubs, and the significant increase in the number of outdoor smokers at 8 venues. The greatest change was an increase in the frequency of outdoor PM2.5 concentrations exceeding 25 mum m-3 which is the Australian PM2.5 advisory standard for ambient air (24 hours). Weak to strong significant correlations (R2=0.402-0.757 p=0.000-0.022) were identified between outdoor smokers and indoor PM2.5 concentrations (3 clubs), and a significant correlation (R2=1.000 p=0.000) between nicotine and indoor pollutants at one club. The results of this study indicate that indoor smoking bans may not fully protect the health of the public and workers in venues because of the possible infiltration of environmental tobacco smoke (ETS) identified at three clubs, as well as outdoor exposure to ETS associated with an increase in smoking activity. The lack of current indoor air quality standards makes the interpretation of the post ban air quality data difficult. Although, the mean concentration of contaminants were all below recommended limits for ambient air. The potential infiltration of ETS inside some clubs indicates that air quality may still represent both an occupational and public health risk because ETS has no safe exposure limit (WHO, 2000). (Abstract shortened by ProQuest.).

TU-EF-204-02: Hiigh Quality and Sub-MSv Cerebral CT Perfusion Imaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Ke; Niu, Kai; Wu, Yijing

2015-06-15

Purpose: CT Perfusion (CTP) imaging is of great importance in acute ischemic stroke management due to its potential to detect hypoperfused yet salvageable tissue and distinguish it from definitely unsalvageable tissue. However, current CTP imaging suffers from poor image quality and high radiation dose (up to 5 mSv). The purpose of this work was to demonstrate that technical innovations such as Prior Image Constrained Compressed Sensing (PICCS) have the potential to address these challenges and achieve high quality and sub-mSv CTP imaging. Methods: (1) A spatial-temporal 4D cascaded system model was developed to indentify the bottlenecks in the current CTPmore » technology; (2) A task-based framework was developed to optimize the CTP system parameters; (3) Guided by (1) and (2), PICCS was customized for the reconstruction of CTP source images. Digital anthropomorphic perfusion phantoms, animal studies, and preliminary human subject studies were used to validate and evaluate the potentials of using these innovations to advance the CTP technology. Results: The 4D cascaded model was validated in both phantom and canine stroke models. Based upon this cascaded model, it has been discovered that, as long as the spatial resolution and noise properties of the 4D source CT images are given, the 3D MTF and NPS of the final CTP maps can be analytically derived for a given set of processing methods and parameters. The cascaded model analysis also identified that the most critical technical factor in CTP is how to acquire and reconstruct high quality source images; it has very little to do with the denoising techniques often used after parametric perfusion calculations. This explained why PICCS resulted in a five-fold dose reduction or substantial improvement in image quality. Conclusion: Technical innovations generated promising results towards achieving high quality and sub-mSv CTP imaging for reliable and safe assessment of acute ischemic strokes. K. Li, K. Niu, Y. Wu: Nothing to disclose. G.-H. Chen: Research funded, GE Healthcare; Research funded, Siemens AX.« less

Brain-derived neurotropic factor polymorphisms, traumatic stress, mild traumatic brain injury, and combat exposure contribute to postdeployment traumatic stress.

PubMed

Dretsch, Michael N; Williams, Kathy; Emmerich, Tanja; Crynen, Gogce; Ait-Ghezala, Ghania; Chaytow, Helena; Mathura, Venkat; Crawford, Fiona C; Iverson, Grant L

2016-01-01

In addition to experiencing traumatic events while deployed in a combat environment, there are other factors that contribute to the development of posttraumatic stress disorder (PTSD) in military service members. This study explored the contribution of genetics, childhood environment, prior trauma, psychological, cognitive, and deployment factors to the development of traumatic stress following deployment. Both pre- and postdeployment data on 231 of 458 soldiers were analyzed. Postdeployment assessments occurred within 30 days from returning stateside and included a battery of psychological health, medical history, and demographic questionnaires; neurocognitive tests; and blood serum for the D2 dopamine receptor (DRD2), apolipoprotein E (APOE), and brain-derived neurotropic factor (BDNF) genes. Soldiers who screened positive for traumatic stress at postdeployment had significantly higher scores in depression (d = 1.91), anxiety (d = 1.61), poor sleep quality (d = 0.92), postconcussion symptoms (d = 2.21), alcohol use (d = 0.63), traumatic life events (d = 0.42), and combat exposure (d = 0.91). BDNF Val66 Met genotype was significantly associated with risk for sustaining a mild traumatic brain injury (mTBI) and screening positive for traumatic stress. Predeployment traumatic stress, greater combat exposure and sustaining an mTBI while deployed, and the BDNF Met/Met genotype accounted for 22% of the variance of postdeployment PTSD scores (R (2)  = 0.22, P < 0.001). However, predeployment traumatic stress, alone, accounted for 17% of the postdeployment PTSD scores. These findings suggest predeployment traumatic stress, genetic, and environmental factors have unique contributions to the development of combat-related traumatic stress in military service members.

[Perceived Autonomy in Old Age scale: Factor structure and psychometric properties of the Polish adaptation].

PubMed

Kroemeke, Aleksandra

2015-01-01

Sense of autonomy - the possibility to choose and decide - is one of the markers of positive and active aging. The goal of this study was to examine the Polish adaptation of the Perceived Autonomy in Old Age (PAA) scale and to determine its internal structure and psychometric properties: reliability, as well as construct and discriminant validity. 277 seniors (female=187; male=90), without cognitive function disorders aged 60 to 100 (M=77.4; SD=9.2) took part in the study. Apart from the PAA, the ADL and IADL scales (self-reliance assessment) were used, as well as the Emotional State Questionnaire (a measure for positive and negative emotions) and the WHOQoL-Brief (a measure for health-related quality of life). As a result of an exploratory and confirmation factor analysis a one-factor tool with five items was built. Reliability coefficients of the scale measured with the internal consistency method and test-retest were ≥ 0.80. Positive correlations were found with indicators in the ADL, IADL, as well as in the somatic and psychological domain of life quality, and positive emotions. Negative correlations were found for negative emotions. The obtained results indicated very high reliability and accuracy for the Polish adaptation of the SPA. The tool can be used as a predictor and/or indicator of successful aging and life quality of seniors.

Preslaughter factors affecting poultry meat quality chapter 2.

USDA-ARS?s Scientific Manuscript database

Poultry meat quality is affected by numerous antemortem factors, in particular those occurring during the last 24 hours that the bird is alive. These short term factors influence carcass yield (live shrink), carcass defects (bruising, broken/dislocated bones), carcass microbiological contamination, ...

Toward Obtaining Reliable Particulate Air Quality Information from Satellites

NASA Astrophysics Data System (ADS)

Strawa, A. W.; Chatfield, R. B.; Legg, M.; Esswein, R.; Justice, E.

2009-12-01

Air quality agencies use ground sites to monitor air quality, providing accurate information at particular points. Using measurements from satellite imagery has the potential to provide air quality information in a timely manner with better spatial resolution and at a lower cost that can also useful for model validation. While previous studies show acceptable correlations between Aerosol Optical Depth (AOD) derived from MODIS and surface Particulate Matter (PM) measurements on the eastern US, the data do not correlate well in the western US (Al-Saadi et al., 2005; Engle-Cox et al., 2004) . This paper seeks to improve the AOD-PM correlations by using advanced statistical analysis techniques. Our study area is the San Joaquin Valley in California because air quality in this region has failed to meet state and federal attainment standards for PM for the past several years. A previous investigation found good correlation of the AOD values between MODIS, MISR and AERONET, but poor correlations (R2 ~ 0.02) between satellite-based AOD and surface PM2.5 measurements. PM2.5 measurements correlated somewhat better (R2 ~ 0.18) with MODIS-derived AOD using the Deep Blue surface reflectance algorithm (Hsu et al., 2006) rather than the standard MODIS algorithm. This level of correlation is not adequate for reliable air quality measurements. Pelletier et al. (2007) used generalized additive models (GAMs) and meteorological data to improve the correlation between PM and AERONET AOD in western Europe. Additive models are more flexible than linear models and the functional relationships can be plotted to give a sense of the relationship between the predictor and the response. In this paper we use GAMs to improve surface PM2.5 to MODIS-AOD correlations. For example, we achieve an R2 ~ 0.44 using a GAM that includes the Deep Blue AOD, and day of year as parameters. Including NOx observations, improves the R2 ~ 0.64. Surprisingly Ångström exponent did not prove to be a significant factor. The relationships between the predictor and the response are discussed. Al-Saadi, J., J. Szykman, R.B. Pierce, C. Kittaka, D. Neil, D.A. Chu, L. Remer, L. Gumley, E. Prins, L. Weinstock, C. MacDonald, R. Wayland, F. Dimmick, and J. Fishman, Imporving national air quality forecasts with satellite aerosol observations, Bull. Amer, Met. Soc. (Sept), 1249-1261, 2005. Engle-Cox, J.A., C.H. Holloman, B.W. Coutant, and R.M. Hoff, Qualitative and quantitative evaluation of MODIS satellite sensor data for regional and urban scale air quality, Atmos. En., 38, 2495-2509, 2004. Hsu, N.C., S.-C. Tsay, M.D. King, and J.R. Herman, Deep blue retrievals of Asian Aerosol properties during ACE-Asia, IEEE Trans. on Geosci.a nd Remote Sensing, 44 (11), 3180, 2006. Pelletier, B., R. Santer, and J. Vidot, Retrieving of particulate matter from optical measurements: A semi-parametric approach, J. Geophys. Res., 112 (D06208), 2007.

[Effect of occupational stress and effort-reward imbalance on sleep quality of people's policeman].

PubMed

Wu, Hui; Gu, Guizhen; Yu, Shanfa

2014-04-01

To explore the effect of occupational stress and effort-reward imbalance on sleep quality of people's police. A cluster sampling survey of sleep quality and occupational stress correlated factors was conducted on 287 police from a city public security bureau by questionnaires in May, 2011; the relationship between sleep quality and occupational stress correlated factors was analyzed by one-way ANOVA and multivariate non-conditional logistic regression using effort-reward imbalance model (ERI) and demand-control-support model (DCS). And the subjects were divided into high tension group and low tension group using the 1.0 of ERI and DCS coefficients as the boundary. The sleep quality score of shift work police was higher than day work police (11.95 ± 6.54 vs 9.52 ± 6.43, t = 2.77, P < 0.05).In ERI model, the sleep quality score in high tension group was higher than low tension group (14.50 ± 6.41 vs 8.60 ± 5.53, t = -5.32, P < 0.01), and in DCS model, the sleep quality score in high tension group was also higher than low tension group (13.71 ± 6.62 vs 9.46 ± 6.04, t = -3.71, P < 0.01).For the regression analysis of ERI model as an argument, sex (OR = 3.0, 95%CI:1.16-7.73) , age for 30-39 years (OR = 3.48, 95%CI:1.32-9.16) , intrinsic effort (OR = 2.30, 95%CI:1.10-4.81) and daily hassles (OR = 2.15, 95%CI:1.06-4.33) were risk factors of low sleep quality, and reward (OR = 0.26, 95%CI:0.12-0.52) was the protective factor.For the regression analysis of DCS model as an argument , age for 30-39 years (OR = 2.55, 95%CI:1.02-6.37) , depressive symptom (OR = 2.10, 95%CI:1.14-3.89) and daily hassles (OR = 3.25, 95%CI:1.70-6.19) were risk factors of low sleep quality.While the ERI model and the DCS model were analyzed simultaneously, sex (OR = 3.03, 95%CI:1.15-7.98) , age for 30-39 years (OR = 3.71, 95%CI:1.38-9.98) and daily hassles (OR = 2.09, 95%CI:1.01-4.30) were the risk factors of low sleep quality, and reward (OR = 0.22, 95%CI:0.10-0.48) was the protective factor. Occupational stress and effort-reward imbalance affected the sleep quality to people's policeman.

Reducing contrast-induced acute kidney injury using a regional multicenter quality improvement intervention.

PubMed

Brown, Jeremiah R; Solomon, Richard J; Sarnak, Mark J; McCullough, Peter A; Splaine, Mark E; Davies, Louise; Ross, Cathy S; Dauerman, Harold L; Stender, Janette L; Conley, Sheila M; Robb, John F; Chaisson, Kristine; Boss, Richard; Lambert, Peggy; Goldberg, David J; Lucier, Deborah; Fedele, Frank A; Kellett, Mirle A; Horton, Susan; Phillips, William J; Downs, Cynthia; Wiseman, Alan; MacKenzie, Todd A; Malenka, David J

2014-09-01

Contrast-induced acute kidney injury (CI-AKI) is associated with increased morbidity and mortality after percutaneous coronary interventions and is a patient safety objective of the National Quality Forum. However, no formal quality improvement program to prevent CI-AKI has been conducted. Therefore, we sought to determine whether a 6-year regional multicenter quality improvement intervention could reduce CI-AKI after percutaneous coronary interventions. We conducted a prospective multicenter quality improvement study to prevent CI-AKI (serum creatinine increase ≥0.3 mg/dL within 48 hours or ≥50% during hospitalization) among 21 067 nonemergent patients undergoing percutaneous coronary interventions at 10 hospitals between 2007 and 2012. Six intervention hospitals participated in the quality improvement intervention. Two hospitals with significantly lower baseline rates of CI-AKI, which served as benchmark sites and were used to develop the intervention, and 2 hospitals not receiving the intervention were used as controls. Using time series analysis and multilevel poisson regression clustering to the hospital level, we calculated adjusted risk ratios for CI-AKI comparing the intervention period to baseline. Adjusted rates of CI-AKI were significantly reduced in hospitals receiving the intervention by 21% (risk ratio, 0.79; 95% confidence interval: 0.67-0.93; P=0.005) for all patients and by 28% in patients with baseline estimated glomerular filtration rate <60 mL/min per 1.73 m(2) (risk ratio, 0.72; 95% confidence interval: 0.56-0.91; P=0.007). Benchmark hospitals had no significant changes in CI-AKI. Key qualitative system factors associated with improvement included multidisciplinary teams, limiting contrast volume, standardized fluid orders, intravenous fluid bolus, and patient education about oral hydration. Simple cost-effective quality improvement interventions can prevent ≤1 in 5 CI-AKI events in patients with undergoing nonemergent percutaneous coronary interventions. © 2014 American Heart Association, Inc.

The National Shipbuilding Research Program, Analytical Quality Circles

DTIC Science & Technology

1986-09-01

standard tools for quality control, in English, see “Guide to Quality Control” by Dr. Kaoru Ishikawa , Asian Productivity Organization, Aoyama Dai-ichi...factors affect work evaluation is shown schemati- cally by Characteristic-Factor Diagrams (also called Fishbone or Ishikawa Diagrams), see Figure 2-5

A modeling study on the effect of urban land surface forcing to regional meteorology and air quality over South China

NASA Astrophysics Data System (ADS)

Zhu, Kuanguang; Xie, Min; Wang, Tijian; Cai, Junxiong; Li, Songbing; Feng, Wen

2017-03-01

The change of land-use from natural to artificial surface induced by urban expansion can deeply impact the city environment. In this paper, the model WRF/Chem is applied to explore the effect of this change on regional meteorology and air quality over South China, where people have witnessed a rapid rate of urbanization. Two sets of urban maps are adopted to stand for the pre-urbanization and the present urban land-use distributions. Month-long simulations are conducted for January and July, 2014. The results show that urban expansion can obviously change the weather conditions around the big cities of South China. Especially in the Pearl River Delta region (PRD), the urban land-use change can increase the sensible heat flux by 40 W/m2 in January and 80 W/m2 in July, while decrease the latent heat flux about -50 W/m2 in January and -120 W/m2 in July. In the consequent, 2-m air temperature (T2) increases as much as 1 °C and 2 °C (respective to January and July), planetary boundary layer height (PBLH) rises up by 100-150 m and 300 m, 10-m wind speed (WS10) decreases by -1.2 m/s and -0.3 m/s, and 2-m specific humidity is reduced by -0.8 g/kg and -1.5 g/kg. Also, the precipitation in July can be increased as much as 120 mm, with more heavy rains and rainstorms. These variations of meteorological factors can significantly impact the spatial and vertical distribution of air pollutants as well. In PRD, the enhanced updraft can reduce the surface concentrations of PM10 by -40 μg/m3 (30%) in January and -80 μg/m3 (50%) in July, but produce a correlating increase in the concentrations at higher atmospheric layers. However, according to the increase in T2 and the decrease in surface NO, the surface concentrations of O3 in PRD can increase by 2-6 ppb in January and 8-12 ppb in July. Meanwhile, there is a significant increase in the O3 concentrations at upper layers above PRD, which should be attributed to the increase in air temperature and the enhanced upward transport of O3 and its precursors. As for some relative small cities, such as Haikou, there is very little variation in surface PM10 and O3 in both months, implying less urbanization in these areas. Moreover, the depletion of O3 by NO may be the main cause of the reduction of O3 at upper layers in these small cities.

Measurement of fugitive volatile organic compound emissions from a petrochemical tank farm using open-path Fourier transform infrared spectrometry

NASA Astrophysics Data System (ADS)

Wu, Chang-Fu; Wu, Tzong-gang; Hashmonay, Ram A.; Chang, Shih-Ying; Wu, Yu-Syuan; Chao, Chun-Ping; Hsu, Cheng-Ping; Chase, Michael J.; Kagann, Robert H.

2014-01-01

Fugitive emission of air pollutants is conventionally estimated based on standard emission factors. The Vertical Radial Plume Mapping (VRPM) technique, as described in the US EPA OTM-10, is designed to measure emission flux by directly monitoring the concentration of the plume crossing a vertical plane downwind of the site of interest. This paper describes the evaluation results of implementing VRPM in a complex industrial setting (a petrochemical tank farm). The vertical plane was constructed from five retroreflectors and an open-path Fourier transform infrared spectrometer. The VRPM configuration was approximately 189.2 m in width × 30.7 m in height. In the accompanying tracer gas experiment, the bias of the VRPM estimate was less than 2% and its 95% confidence interval contained the true release rate. Emission estimates of the target VOCs (benzene, m-xylene, o-xylene, p-xylene, and toluene) ranged from 0.86 to 2.18 g s-1 during the 14-day field campaign, while estimates based on the standard emission factors were one order of magnitude lower, possibly leading to an underestimation of the impact of these fugitive emissions on air quality and human health. It was also demonstrated that a simplified 3-beam geometry (i.e., without one dimensional scanning lines) resulted in higher uncertainties in the emission estimates.

Poor sleep quality is associated with increased arterial stiffness in Japanese patients with type 2 diabetes mellitus.

PubMed

Osonoi, Yusuke; Mita, Tomoya; Osonoi, Takeshi; Saito, Miyoko; Tamasawa, Atsuko; Nakayama, Shiho; Someya, Yuki; Ishida, Hidenori; Kanazawa, Akio; Gosho, Masahiko; Fujitani, Yoshio; Watada, Hirotaka

2015-06-18

While poor sleep quality can worsen cardiovascular risk factors such as glucose and lipid profiles in patients with type 2 diabetes mellitus (T2DM), the relationship between sleep quality and atherosclerosis remains largely unknown. The aim of this study was to examine this relationship. The study participants comprised 724 Japanese T2DM outpatients free of history of cardiovascular diseases. The relationships between sleep quality (assessed by the Pittsburgh Sleep Quality Index (PSQI)) and various clinical and laboratory parameters were investigated. The mean PSQI was 5.1 ± 3.0 (±SD). Patients were divided into three groups based on the total PSQI score; subjects with good sleep quality (n = 462), average sleep quality (n = 185), and poor sleep quality (n = 77). In the age/gender-adjusted model, patients with poor sleep quality tended to be obese, evening type and depressed. However, other lifestyles showed no significant trends. Alanine aminotransferase, fasting blood glucose, HbA1c, systolic blood pressure, urinary albumin excretion, and brachial-ankle pulse wave velocity (baPWV) tended to be higher in patients with poor sleep quality. High baPWV was the only parameter that correlated with poor sleep in a model adjusted for several other lifestyle factors. Our study indicates that poor sleep quality in T2DM patients correlates with increased arterial wall stiffness, a marker of atherosclerosis and a risk factor for cardiovascular diseases.

Acceptance and Success Factors for M-Learning of ERP Systems Curricula

ERIC Educational Resources Information Center

Scholtz, Brenda; Kapeso, Mando

2014-01-01

The effective training of users is a key factor of the success of Enterprise Resource Planning (ERP) system projects. This need for ERP system training is exacerbated by a demand for quality ERP consultants which is evident in Europe and in African countries, particularly in South Africa where science and technology education has been identified…

A patient survey of sleep quality in the Intensive Care Unit.

PubMed

Little, A; Ethier, C; Ayas, N; Thanachayanont, T; Jiang, D; Mehta, S

2012-04-01

Patients in the Intensive Care Unit (ICU) experience qualitative and quantitative sleep disruption leading to sleep deprivation and adverse sequelae. Patient-related factors, environmental factors, and health-support techniques contribute to sleep disruption. This quality improvement study examines potential factors contributing to poor sleep in the ICU. Medical and surgical patients who spent at least one night in one of two academic Canadian ICUs were asked to complete a questionnaire that explored quality and quantity of sleep, factors contributing to poor sleep, and suggested modifications to improve sleep in the ICU. Patient demographics as well as admission data were recorded. Study population was 116 patients (63 M:53 F). Mean age was 55.5 ± 18.1 years and APACHE II score 16.0 ± 7.9. 45.7% were mechanically ventilated, and 68.9% received intravenous sedatives and/or analgesics. Sleep quality in the ICU was rated as poor/very poor by 59% of patients compared to 24% at home; the 5 most frequently cited reasons for this were noise, pain, light, loud talking, and intravenous catheters. Patients suggested the following nocturnal modifications: closing doors/blinds, no unnecessary interruptions, sleeping pills, and dimmed lights. No significant correlations were found between perceived sleep quality and illness severity or mechanical ventilation. Patients who received intravenous sedatives reported better sleep quality (P<0.01). Patients commonly report poor sleep in the ICU related to environmental factors that are potentially modifiable.

Impact of ferric carboxymaltose on the evolution of hemoglobin and ECOG performance status in iron-deficient patients with solid tumors: a 3-month follow-up retrospective study.

PubMed

Coussirou, J; Debourdeau, A; Stancu, A; Jean, C; Azouza, W; Chanet, B; De Crozals, F; Boustany, R; Debourdeau, P

2018-05-24

Anemia is often associated with a lower quality of life and less tolerance to treatments in cancer patients. The aims of this retrospective study were to assess the biological (hemoglobin, Hb) and clinical (ECOG index) impact of ferric carboxymaltose (FCM) and to identify predictive factors of response in cancer patients with iron deficiency. We included 133 patients with solid tumors who received at least one dose of FCM in 2015. At baseline, most patients had metastatic cancer (70%), were undergoing chemotherapy (82%), suffered from anemia (90%), and 72% had an ECOG 0-1 index. Mean Hb level was statistically higher at M1 (108.3 g/L ± 13.9), M2 (110.3 g/L ± 16.1), and M3 (111.7 g/L ± 12.6) than M0 (99.2 g/L ± 13.9). Mean ECOG score increased significantly at M1 (1.31 ± 0.80) and M2 (1.31 ± 0.87) compared to M0 (1.13 ± 0.80). Variations of ECOG index between M0 and M1 were independent of levels of Hb and ferritin at inclusion and pretreatment use of transfusion and ESAs. Increase of Hb level was higher in patients with Hb < 100 g/L, ferritinemia < 800 ng/ml, or transfused before inclusion. In multivariate analysis, an ECOG index of 0 was the only predictive factor of an increase of ECOG index and Hb level < 100 g/L and ferritinemia < 800 ng/ml were predictive of an increase in Hb. Even though there was no improvement in ECOG index, this study did identify an increase of Hb for patients receiving FCM, indicating its potential benefit in iron-deficient cancer patients.

Photosynthetic metabolism and quality of Eugenia pyriformis Cambess. seedlings on substrate function and water levels.

PubMed

Scalon, Silvana P Q; Jeromini, Tatiane S; Mussury, Rosilda M; Dresch, Daiane M

2014-12-01

The aim of this research was to evaluate the quality and photosynthetic metabolism of "uvaia" seedlings (Eugenia pyriformis Cambess.) on different substrates and water regimes. The seeds were sown in tubes of 50 x 190 mm in the following substrates: Sand (S), Latosol + Sand (L + S) (1:1), Latosol + Sand + Semi Decomposed Poultry Litter (L + S1 + PL) ( 1:1:0.5), Latosol + Sand + Semi Decomposed Poultry Litter (L + S2 + PL) (1:2:0.5), Latosol + Bioplant® (L + B) (1:1), and the water levels assessed were 50, 75 and 100% of water retention capacity. At 60, 90, 120 and 150 days the seedlings were evaluated according to their chlorophyll index, leaf area (cm2) and Dickson Quality Index (DQI) and at 150 days their internal concentration of carbon (mol m-2 s-1), stomatal conductance (mol m-2 s-1), transpiration rate (mmol m-2 s-1), photosynthesis (µmol m-2 s-1) and efficiency of water use (µmol de CO2 / mmol de H2O). Until their 150th days, the seedlings had higher quality and photosynthetic metabolism when cultured with substrates containing latosol + sand + poultry litter on the two variations assessed and water retention capacity of 50%.

Development of AISI 316L stainless steel coronary stent

NASA Astrophysics Data System (ADS)

García-López, Erika; Siller, Héctor R.; Rodríguez, Ciro A.

2018-02-01

Coronary stents are manufactured through a sequence of processes and each step demands the process control to assure surface quality. This study is focused on the influence of laser cutting parameters and electropolishing on average surface roughness and back wall dross percentage for fiber laser cutting of AISI 316L coronary struts. A preliminary test and a design of experiments (DOE) were implemented to determine the limiting cutting conditions and the effect of these parameters on quality indicators. Preliminary results identify four cutting zones from a non-cut zone to a burned zone, in a frequency range between 1000 and 1500 Hz and a peak power between 160 to 180 W for clean cuts. From the DOE results, several interactions between factors were observed; however, a laser frequency of 1000 to 1500 Hz and a cutting speed of 250 mm/min minimize the backwall dross percentage and the surface roughness to values less than 2% and 0.9 μm, respectively. After the laser conditions selection, coronary stents were manufactured and electropolished to reduce the surface roughness on the strut edge. Electropolishing results indicate a surface roughness reduction from 0.9 μm to 0.3 μm after 300 s of electropolishing time.

A Monte Carlo study of the quality dependence factors of common TLD materials in photon and electron beams.

PubMed

Mobit, P N; Nahum, A E; Mayles, P

1998-08-01

A Monte Carlo simulation of the quality dependence of different TL materials, in the form of discs 3.61 mm in diameter and 0.9 mm thick, in radiotherapy photon beams relative to 60Co gamma-rays has been performed. The beam qualities ranged from 50 kV to 25 MV x-rays. The TL materials were: CaF2, CaSO4, LiF and Li2B4O7. The effects of the dopants on energy deposition in the TL material have also been determined for the highly sensitive LiF:Mg:Cu:P (TLD-100H) and for CaF2:Mn. It was found that there was a significant difference in the quality dependence factor derived from Monte Carlo simulations between LiF and LiF:Mg:Cu:P but not between CaF2 and CaF2:Mn. The quality dependence factors for Li2B4O7 varied from 0.990 +/- 0.008 (1 sd) for 25 MV x-rays to 0.940 +/- 0.009 (1 sd) for 50 kV x-rays relative to 60Co gamma-rays; Monte Carlo simulations were also performed for Li2B4O7 in megavoltage electron beams. For CaF2, the quality dependence factor varied from 0.927 +/- 0.008 (1 sd) for 25 MV x-rays to 10.561 +/- 0.008 (1 sd) for 50 kV x-rays. The figure for CaSO4 ranged from 0.943 +/- 0.008 (1 sd) for 25 MV x-rays to 9.010 +/- 0.008 (1 sd) for 50 kV x-rays. The quality dependence factor for CaF2 increases by up to 5% with depth and by up to 15% with field size for the kilovoltage x-ray beams. For LiF-TLD, however, there was no significant dependence on the field size or depth of irradiation in the kilovoltage energy range.

Air quality at outdoor community events: findings from fine particulate (PM2.5) sampling at festivals in Edmonton, Alberta.

PubMed

Collins, Damian; Parsons, Marc; Zinyemba, Chaka

2014-01-01

Exposure to fine particulate matter (PM2.5) is associated with a broad range of health risks. This study assessed the impacts of cooking smoke and environmental tobacco smoke on air quality at outdoor community events in Edmonton, Alberta (Canada). Data were collected at three festivals in July-August 2011 using a portable real-time airborne particle monitor. The pooled mean PM2.5 level was 12.41 μg/m(3). Peak readings varied from 52 to 1877 μg/m(3). Mean PM2.5 near food stalls was 35.42 μg/m(3), which exceeds the WHO limit for 24 h exposure. Mean PM2.5 levels with smokers present were 16.39 μg/m(3) (all points) and 9.64 μg/m(3) (excluding points near food stalls). Although some smokers withdrew from common spaces, on average 20 smokers/hour were observed within 3 m. Extending smoking bans would improve air quality and address related concerns. However, food preparation is a more pressing area for policy action to reduce PM2.5 exposure at these community events.

Factors associated with poor sleep quality in women with cancer.

PubMed

Mansano-Schlosser, Thalyta Cristina; Ceolim, Maria Filomena

2017-03-02

to analyze the factors associated with poor sleep quality, its characteristics and components in women with breast cancer prior to surgery for removing the tumor and throughout the follow-up. longitudinal study in a teaching hospital, with a sample of 102 women. The following were used: a questionnaire for sociodemographic and clinical characterization, the Pittsburgh Sleep Quality Index; the Beck Depression Inventory; and the Herth Hope Scale. Data collection covered from prior to the surgery for removal of the tumor (T0) to T1, on average 3.2 months; T2, on average 6.1 months; and T3, on average 12.4 months. Descriptive statistics and the Generalized Estimating Equations model were used. depression and pain contributed to the increase in the score of the Pittsburgh Sleep Quality Index, and hope, to the reduction of the score - independently - throughout follow-up. Sleep disturbances were the component with the highest score throughout follow-up. the presence of depression and pain, prior to the surgery, contributed to the increase in the global score of the Pittsburgh Sleep Quality Index, which indicates worse quality of sleep throughout follow-up; greater hope, in its turn, influenced the reduction of the score of the Pittsburgh Sleep Quality Index. analizar los factores asociados a la mala calidad del sueño, sus características y componentes en mujeres con cáncer de mama, antes de la cirugía de retirada del tumor y a lo largo del seguimiento. estudio longitudinal, en hospital universitario con muestra de 102 mujeres. Fueron utilizados: un cuestionario de caracterización sociodemográfica y clínica; el Índice de Calidad del Sueño de Pittsburgh; el Inventario de Depresión de Beck; y la Escala de Esperanza de Herth. La recolección comprendió los momentos: antes de la cirugía de retirada del tumor (T0), en (T1) en promedio 3,2 meses, en (T2) en promedio 6,1 meses y en (T3) en promedio 12,4 meses. Se utilizó estadística descriptiva y el modelo de Ecuaciones de Estimación Generalizada. la depresión y el dolor contribuyeron para el aumento del puntaje del Índice de Calidad del Sueño de Pittsburgh y la esperanza para la reducción del puntaje, de manera independiente, a lo largo del seguimiento. Los trastornos del sueño fueron el componente con puntuación más elevada, a lo largo del seguimiento. la presencia de la depresión y del dolor, previos a la cirugía, contribuyeron para el aumento del puntaje global del Índice de Calidad del Sueño de Pittsburgh, lo que indica peor calidad del sueño, a lo largo del seguimiento y, la mayor esperanza, a su vez, influenció en la reducción del puntaje del Índice de Calidad del Sueño de Pittsburgh. analisar os fatores associados à má qualidade do sono, suas características e componentes em mulheres com câncer de mama antes da cirurgia de retirada do tumor e ao longo do seguimento. estudo longitudinal, em hospital universitário com amostra de 102 mulheres. Foram utilizados: questionário de caracterização sociodemográfica e clínica, Índice de Qualidade do Sono de Pittsburgh; Inventário de Depressão de Beck; Escala de Esperança de Herth. Coleta compreendeu antes da cirurgia de retirada do tumor (T0) em T1, em média 3,2 meses; T2, em média 6,1 meses; T3, em média 12,4 meses. Utilizou-se estatística descritiva e o modelo de Equações de Estimação Generalizada. a depressão e a dor contribuíram para o aumento do escore do Índice de Qualidade de Sono de Pittsburgh, e a esperança, para a redução do escore, de maneira independente, ao longo do seguimento. Os transtornos do sono foram o componente com pontuação mais elevada, ao longo do seguimento. a presença de depressão e de dor, previamente à cirurgia, contribuiu para o aumento do escore global do Índice de Qualidade do Sono de Pittsburgh, o que indica pior qualidade do sono, ao longo do seguimento e, a maior esperança, por sua vez, influenciou na redução do escore do Índice de Qualidade do Sono de Pittsburgh.

Sampling behavior of dairy cattle: effects of variation in dietary energy density on behavior at the feed bunk.

PubMed

Huzzey, J M; Fregonesi, J A; von Keyserlingk, M A G; Weary, D M

2013-01-01

Factors affecting sampling behavior of cattle are poorly understood. The objectives of this study were to measure the effects of variation in feed quality on the feeding behavior of Holstein dairy heifers. Thirty-two heifers were housed in 4 groups of 8. Each group pen had 8 distinct feeding stations. The total mixed ration (TMR) provided was low energy (TMR-L), moderate energy (TMR-M), or high energy (TMR-H). During trial 1 (d 1 to 8), heifers were offered a uniform baseline diet (TMR-M in all 8 feeding stations) interspaced with 2 uniform test diets on d 3 and 6 (TMR-L or TMR-H in all 8 feeding stations). During trial 2 (d 9 to 17) heifers were offered a nonuniform baseline diet (7 feeding stations with TMR-L and 1 feeding station with TMR-H) interspaced with 3 uniform test diets on d 11, 14, and 17 (TMR-L, TMR-M, or TMR-H in all 8 feeding stations). Heifers were observed in pairs (n=16) for 15 min following delivery of fresh feed. Relative to the uniform baseline period of trial 1, 31% fewer switches occurred between feeding stations when offered TMR-H and 51% more switches when offered TMR-L. Relative to the nonuniform baseline of trial 2, 49% fewer, 27% fewer, and 25% more switches occurred during the TMR-H, TMR-M, and TMR-L treatments, respectively. In general, when heifers were offered a diet that was lower in energy density than that previously experienced, they spent less time at each feeding station and when offered a higher energy diet, heifers spent more time at each feeding station. The greater the contrast in energy density between the test and baseline diets, the greater the change in the behavioral response. Competitive interactions at the feed bunk were most frequent when TMR quality varied among the 8 feeding stations; during the nonuniform baseline period of trial 2, the number of competitive interactions was over 3.5 times higher than during all uniform dietary treatments. In summary, dairy heifers sample feed quality by changing feeding locations at the feed bunk and this sampling behavior is affected by variation in diet quality along the feed bunk and across days. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

[Spatial pattern of land surface dead combustible fuel load in Huzhong forest area in Great Xing'an Mountains].

PubMed

Liu, Zhi-Hua; Chang, Yu; Chen, Hong-Wei; Zhou, Rui; Jing, Guo-Zhi; Zhang, Hong-Xin; Zhang, Chang-Meng

2008-03-01

By using geo-statistics and based on time-lag classification standard, a comparative study was made on the land surface dead combustible fuels in Huzhong forest area in Great Xing'an Mountains. The results indicated that the first level land surface dead combustible fuel, i. e., 1 h time-lag dead fuel, presented stronger spatial auto-correlation, with an average of 762.35 g x m(-2) and contributing to 55.54% of the total load. Its determining factors were species composition and stand age. The second and third levels land surface dead combustible fuel, i. e., 10 h and 100 h time-lag dead fuels, had a sum of 610.26 g x m(-2), and presented weaker spatial auto-correlation than 1 h time-lag dead fuel. Their determining factor was the disturbance history of forest stand. The complexity and heterogeneity of the factors determining the quality and quantity of forest land surface dead combustible fuels were the main reasons for the relatively inaccurate interpolation. However, the utilization of field survey data coupled with geo-statistics could easily and accurately interpolate the spatial pattern of forest land surface dead combustible fuel loads, and indirectly provide a practical basis for forest management.

Prospective, randomized and controlled trial on magnesium sulfate administration during laparoscopic gastrectomy: effects on surgical space conditions and recovery profiles.

PubMed

Ryu, J H; Koo, B W; Kim, B G; Oh, A Y; Kim, H H; Park, D J; Lee, C M; Kim, S T; Do, S H

2016-11-01

The degree of neuromuscular blockade is one of the important factors that determine the condition of surgical space during laparoscopic surgery. Magnesium sulfate potentiates the actions of neuromuscular blocking agent, and we hypothesized that intraoperative magnesium sulfate infusion may improve surgical space condition during laparoscopic surgery. Eighty-four patients undergoing elective laparoscopic gastrectomy were randomized to receive isotonic saline (group C) or magnesium sulfate (group M, loading dose with 50 mg/kg over 10 min and then 15 mg/kg/h by continuous infusion) to maintain the moderate neuromuscular blockade using rocuronium. Two experienced surgeons scored the quality of surgical space condition using a 5-point surgical rating scale (SRS). The secondary outcomes included recovery profiles, postoperative pain and adverse events. The SRS in group M was higher than that of group C. The proportion of patients with a SRS of 5 (optimal) was 2.7 % in the group C and 40.5 % in the group M (P < 0.0001) although a lower amount of rocuronium was required in group M than group C [24.2 (6.5) mg/h for group M vs. 27.5 (6) mg/h for group C; P = 0.017]. Pain after operation site was less severe in group M than in group C at postoperative 24 h (P = 0.009). Recovery profiles and adverse events were similar between the two groups. Intraoperative administration of magnesium sulfate improved the quality of surgical space conditions and decreased neuromuscular blocking agent requirement and postoperative pain in patients undergoing laparoscopic gastrectomy.

The Impact of Maturity Stage on Cell Membrane Integrity and Enzymatic Browning Reactions in High Pressure Processed Peaches (Prunus persica).

PubMed

Techakanon, Chukwan; Gradziel, Thomas M; Zhang, Lu; Barrett, Diane M

2016-09-28

Fruit maturity is an important factor associated with final product quality, and it may have an effect on the level of browning in peaches that are high pressure processed (HPP). Peaches from three different maturities, as determined by firmness (M1 = 50-55 N, M2 = 35-40 N, and M3 = 15-20 N), were subjected to pressure levels at 0.1, 200, and 400 MPa for 10 min. The damage from HPP treatment results in loss of fruit integrity and the development of browning during storage. Increasing pressure levels of HPP treatment resulted in greater damage, particularly in the more mature peaches, as determined by shifts in transverse relaxation time (T2) of the vacuolar component and by light microscopy. The discoloration of peach slices of different maturities processed at the same pressure was comparable, indicating that the effect of pressure level is greater than that of maturity in the development of browning.

Maize endosperm-specific transcription factors O2 and PBF network the regulation of protein and starch synthesis

PubMed Central

Zhang, Zhiyong; Zheng, Xixi; Yang, Jun; Messing, Joachim; Wu, Yongrui

2016-01-01

The maize endosperm-specific transcription factors opaque2 (O2) and prolamine-box binding factor (PBF) regulate storage protein zein genes. We show that they also control starch synthesis. The starch content in the PbfRNAi and o2 mutants was reduced by ∼5% and 11%, respectively, compared with normal genotypes. In the double-mutant PbfRNAi;o2, starch was decreased by 25%. Transcriptome analysis reveals that >1,000 genes were affected in each of the two mutants and in the double mutant; these genes were mainly enriched in sugar and protein metabolism. Pyruvate orthophosphate dikinase 1 and 2 (PPDKs) and starch synthase III (SSIII) are critical components in the starch biosynthetic enzyme complex. The expression of PPDK1, PPDK2, and SSIII and their protein levels are further reduced in the double mutants as compared with the single mutants. When the promoters of these genes were analyzed, we found a prolamine box and an O2 box that can be additively transactivated by PBF and O2. Starch synthase IIa (SSIIa, encoding another starch synthase for amylopectin) and starch branching enzyme 1 (SBEI, encoding one of the two main starch branching enzymes) are not directly regulated by PBF and O2, but their protein levels are significantly decreased in the o2 mutant and are further decreased in the double mutant, indicating that o2 and PbfRNAi may affect the levels of some other transcription factor(s) or mRNA regulatory factor(s) that in turn would affect the transcript and protein levels of SSIIa and SBEI. These findings show that three important traits—nutritional quality, calories, and yield—are linked through the same transcription factors. PMID:27621432

Application of data mining to the analysis of meteorological data for air quality prediction: A case study in Shenyang

NASA Astrophysics Data System (ADS)

Zhao, Chang; Song, Guojun

2017-08-01

Air pollution is one of the important reasons for restricting the current economic development. PM2.5 which is a vital factor in the measurement of air pollution is defined as a kind of suspended particulate matter with its equivalent diameter less than 25μm, which may enter the alveoli and therefore make a great impact on the human body. Meteorological factors are also one of the main factors affecting the production of PM2.5, therefore, it is essential to establish the model between meteorological factors and PM2.5 for the prediction. Data mining is a promising approach to model PM2.5 change, Shenyang which is one of the most important industrial city in Northeast China with severe air pollutions is set as the case city. Meteorological data (wind direction, wind speed, temperature, humidity, rainfall, etc.) from 2013 to 2015 and PM2.5 concentration data are used for this prediction. As to the requirements of the World Health Organization (WHO), three data mining models, whereby the predictions of PM2.5 are directly generated by the meteorological data. After assessment, the random forest model is appeared to offer better prediction performance than the other two. At last, the accuracy of the generated models are analysed.

Evaluating signal and noise spectral density of a qPlus sensor with an active feedback control

NASA Astrophysics Data System (ADS)

Lee, Manhee; An, Sangmin; Jhe, Wonho

2018-05-01

Q-control technique enables to actively change the quality factor of the probe oscillation in dynamic atomic force microscopy. The Q-control is realized by adding a self-feedback loop into the original actuation-detection system, in which a damping force with controllable damping coefficient in magnitude and sign is applied to the oscillating probe. While the applied force alters the total damping interaction and thus the overall `signal' of the probe motion, the added feedback system changes the `noise' of the motion as well. Here, we systematically investigate the signal, the noise, and the signal-to-noise ratio of the qPlus sensor under the active Q-control. We quantify the noise of the qPlus motion by measuring the noise spectral density, which is reproduced by a harmonic oscillator model including the thermal and the measurement noises. We show that the noise signal increases with the quality factor controlled, scaling as the square root of the quality factor. Because the overall signal is linearly proportional to the quality factor, the signal-to-noise ratio scales as the square root of the quality factor. The Q-controlled qPlus with a highly enhanced Q, up to 10,000 in air, leads to the minimum detectable force gradient of 0.001 N/m, which would enhance the capability of the qPlus sensor for atomic force microscopy and spectroscopy.

New insights into the interplay between the translation machinery and nonsense-mediated mRNA decay factors.

PubMed

Raimondeau, Etienne; Bufton, Joshua C; Schaffitzel, Christiane

2018-06-19

Faulty mRNAs with a premature stop codon (PTC) are recognized and degraded by nonsense-mediated mRNA decay (NMD). Recognition of a nonsense mRNA depends on translation and on the presence of NMD-enhancing or the absence of NMD-inhibiting factors in the 3'-untranslated region. Our review summarizes our current understanding of the molecular function of the conserved NMD factors UPF3B and UPF1, and of the anti-NMD factor Poly(A)-binding protein, and their interactions with ribosomes translating PTC-containing mRNAs. Our recent discovery that UPF3B interferes with human translation termination and enhances ribosome dissociation in vitro , whereas UPF1 is inactive in these assays, suggests a re-interpretation of previous experiments and modification of prevalent NMD models. Moreover, we discuss recent work suggesting new functions of the key NMD factor UPF1 in ribosome recycling, inhibition of translation re-initiation and nascent chain ubiquitylation. These new findings suggest that the interplay of UPF proteins with the translation machinery is more intricate than previously appreciated, and that this interplay quality-controls the efficiency of termination, ribosome recycling and translation re-initiation. © 2018 The Author(s).

Association of ambient particulate matter with heart failure incidence and all-cause readmissions in Tasmania: an observational study.

PubMed

Huynh, Quan L; Blizzard, Christopher Leigh; Marwick, Thomas H; Negishi, Kazuaki

2018-05-10

We sought to investigate the relationship between air quality and heart failure (HF) incidence and rehospitalisation to elucidate whether there is a threshold in this relationship and whether this relationship differs for HF incidence and rehospitalisation. This retrospective observational study was performed in an Australian state-wide setting, where air pollution is mainly associated with wood-burning for winter heating. Data included all 1246 patients with a first-ever HF hospitalisation and their 3011 subsequent all-cause readmissions during 2009-2012. Daily particulate matter <2.5 µm (PM 2.5 ), temperature, relative humidity and influenza infection were recorded. Poisson regression was used, with adjustment for time trend, public and school holiday and day of week. Tasmania has excellent air quality (median PM 2.5 =2.9 µg/m 3 (IQR: 1.8-6.0)). Greater HF incidences and readmissions occurred in winter than in other seasons (p<0.001). PM 2.5 was detrimentally associated with HF incidence (risk ratio (RR)=1.29 (1.15-1.42)) and weakly so with readmission (RR=1.07 (1.02-1.17)), with 1 day time lag. In multivariable analyses, PM 2.5 significantly predicted HF incidence (RR=1.12 (1.01-1.24)) but not readmission (RR=0.96 (0.89-1.04)). HF incidence was similarly low when PM <4 µg/m 3 and only started to rise when PM 2.5 ≥4 µg/m 3 . Stratified analyses showed that PM 2.5 was associated with readmissions among patients not taking beta-blockers but not among those taking beta-blockers (p interaction =0.011). PM 2.5 predicted HF incidence, independent of other environmental factors. A possible threshold of PM 2.5 =4 µg/m 3 is far below the daily Australian national standard of 25 µg/m 3 . Our data suggest that beta-blockers might play a role in preventing adverse association between air pollution and patients with HF. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Increased resource use in men with metastatic prostate cancer does not result in improved survival or quality of care at the end of life.

PubMed

Golan, Ron; Bernstein, Adrien N; Gu, Xiangmei; Dinerman, Brian F; Sedrakyan, Art; Hu, Jim C

2018-05-15

Cancer care and end-of-life (EOL) care contribute substantially to health care expenditures. Outside of clinical trials, to our knowledge there exists no standardized protocol to monitor disease progression in men with metastatic prostate cancer (mPCa). The objective of the current study was to evaluate the factors and outcomes associated with increased imaging and serum prostate-specific antigen use in men with mPCa. Using Surveillance, Epidemiology, and End Results-Medicare data from 2004 to 2012, the authors identified men diagnosed with mPCa with at least 6 months of follow-up. Extreme users were classified as those who had either received prostate-specific antigen testing greater than once per month, or who underwent cross-sectional imaging or bone scan more frequently than every 2 months over a 6-month period. Associations between extreme use and survival outcomes, costs, and quality of care at EOL, as measured by timing of hospice referral, frequency of emergency department visits, length of stay, and intensive care unit or hospital admissions, were examined. Overall, a total of 3026 men with mPCa were identified, 791 of whom (26%) were defined as extreme users. Extreme users were more commonly young, white/non-Hispanic, married, higher earning, and more educated (P<.001, respectively). Extreme use was not associated with improved quality of care at EOL. Yearly health care costs after diagnosis were 36.4% higher among extreme users (95% confidence interval, 27.4%-45.3%; P<.001). Increased monitoring among men with mPCa significantly increases health care costs, without a definitive improvement in survival nor quality of care at EOL noted. Monitoring for disease progression outside of clinical trials should be reserved for those in whom findings will change management. Cancer 2018;124:2212-9. © 2018 American Cancer Society. © 2018 American Cancer Society.

Fully Automated Quantification of Cytomegalovirus (CMV) in Whole Blood with the New Sensitive Abbott RealTime CMV Assay in the Era of the CMV International Standard

PubMed Central

Schnepf, Nathalie; Scieux, Catherine; Resche-Riggon, Matthieu; Feghoul, Linda; Xhaard, Alienor; Gallien, Sébastien; Molina, Jean-Michel; Socié, Gérard; Viglietti, Denis; Simon, François; Mazeron, Marie-Christine

2013-01-01

Fully standardized reproducible and sensitive quantification assays for cytomegalovirus (CMV) are needed to better define thresholds for antiviral therapy initiation and interruption. We evaluated the newly released Abbott RealTime CMV assay for CMV quantification in whole blood (WB) that includes automated extraction and amplification (m2000 RealTime system). Sensitivity, accuracy, linearity, and intra- and interassay variability were validated in a WB matrix using Quality Control for Molecular Diagnostics (QCMD) panels and the WHO international standard (IS). The intra- and interassay coefficients of variation were 1.37% and 2.09% at 5 log10 copies/ml and 2.41% and 3.80% at 3 log10 copies/ml, respectively. According to expected values for the QCMD and Abbott RealTime CMV methods, the lower limits of quantification were 104 and <50 copies/ml, respectively. The conversion factor between international units and copies (2.18), determined from serial dilutions of the WHO IS in WB, was significantly different from the factor provided by the manufacturer (1.56) (P = 0.001). Results from 302 clinical samples were compared with those from the Qiagen artus CMV assay on the same m2000 RealTime system. The two assays provided highly concordant results (concordance correlation coefficient, 0.92), but the Abbott RealTime CMV assay detected and quantified, respectively, 20.6% and 47.8% more samples than the Qiagen/artus CMV assay. The sensitivity and reproducibility of the results, along with the automation, fulfilled the quality requirements for implementation of the Abbott RealTime CMV assay in clinical settings. Our results highlight the need for careful validation of conversion factors provided by the manufacturers for the WHO IS in WB to allow future comparison of results obtained with different assays. PMID:23616450

Quantitative evaluation of plasma after methylene blue and white light treatment in four Chinese blood centers.

PubMed

Chunhui, Yang; Guohui, Bian; Hong, Yang; Xiaopu, Xiao; Zherong, Bai; Mingyuan, Wang; Xinsheng, Zhang; Juanjuan, Wang; Changqing, Li; Wuping, Li

2013-12-01

Pathogen reduction technology is an important process in the blood safety system, including solvent/detergent treatment, filtration and methylene blue-photochemical technology (MB-PCT). To investigate the quality of MB-PCT-treated plasma, plasma samples from four Chinese blood centers were analyzed over 12 months of storage to determine the recovery of activities and levels of various plasma proteins. Ten plasma units each from the Suzhou, Yancheng, Chongqing and Shandong blood centers were divided into two aliquots. One was subjected to treatment with one of two methylene blue-photochemical technology instruments and the other was used as control. The treated and untreated sample pairs were stored at -30°C. The recovery rates of coagulation factors, inhibitor proteins, total protein, immunoglobulins, and complement proteins were measured at different time points after storage. The mean recovery of most proteins exceeded 80% after MB treatment. The exceptions were factor XI and fibrinogen, of which only 71.3-74% and 69.0-92.3% were retained during storage. The two equipment types differed in terms of residual MB concentration in the plasma samples (0.18 μM and 0.29 μM, respectively). They had similar protein recovery rates at 0.5 month but differed at later time points. The four blood centers differed significantly with regard to factor II, V, VIII and fibrinogen activities. Only the samples from the Shandong blood center met the methylene blue treated fresh frozen plasma requirement. The major factor that influenced the quality of the MB-FFP samples was the time taken between blood collection and storage. Methylene blue treated plasma showed reduced coagulation factor (CF) activity and protein levels. The MB treatment-induced damage to the proteins was acceptable at the four Chinese blood centers, but the quality of the MB-treated plasma in general was not satisfactory. The main factor affecting plasma quality may be the duration of the collection and processing. Copyright © 2013 Elsevier Ltd. All rights reserved.

Effect of antioxidant inclusion and oil quality on broiler performance, meat quality, and lipid oxidation.

PubMed

Tavárez, M A; Boler, D D; Bess, K N; Zhao, J; Yan, F; Dilger, A C; McKeith, F K; Killefer, J

2011-04-01

The objective of the present study was to evaluate the effect of antioxidant inclusion and oil quality on broiler performance, meat quality, shelf life, and tissue oxidative status. Ross 308 male broilers were allotted to a randomized complete block design in a 2 × 2 factorial arrangement. Factors consisted of antioxidant (ethoxyquin and propyl gallate) inclusion at 2 levels (0 or 135 mg/kg) and oil quality (fresh soybean oil, control diet peroxide value <1 mEq/kg, or oxidized soybean oil, diet peroxide value 7 mEq/kg). Each treatment included 12 pen replicates comprising 24 birds for a total of 1,152 birds on trial allotted to 48 pens. On the final day of the study, 1 bird from each pen was killed by cervical dislocation and used for determination of tissue oxidative status. Another 5 broilers from each pen were processed at a commercial slaughtering facility. Immediately after processing, carcasses were transported to the University of Illinois Meat Science Laboratory (Urbana) for further analysis. With the exception of 2 responses (liver vitamin A and serum vitamin A), no interactions were found between antioxidant inclusion and oil quality. Body weight and weight gain were increased by dietary antioxidant inclusion (P < 0.001) and fresh oil (P < 0.001). Feed intake was increased in broilers fed the antioxidant (P = 0.047) and fresh oil (P = 0.062). Antioxidant inclusion had no effect on G:F (P = 0.18). Antioxidant supplementation had no effect on carcass weight (P = 0.202), dressing percentage (P = 0.906), breast yield (P = 0.708), or breast ultimate pH (P = 0.625) and had minimal effect on breast color. Antioxidant supplementation (P = 0.057) reduced breast thiobarbituric acid reactive substances after 7 d of display. Fresh oil decreased liver thiobarbituric acid reactive substances, whereas antioxidant inclusion increased serum and liver vitamin A and E concentration. The presence of an antioxidant in the feed protects lipids from further oxidizing, therefore increasing broiler performance and improving shelf life when using oxidized oil.

Quality controls in cellular immunotherapies: rapid assessment of clinical grade dendritic cells by gene expression profiling.

PubMed

Castiello, Luciano; Sabatino, Marianna; Zhao, Yingdong; Tumaini, Barbara; Ren, Jiaqiang; Ping, Jin; Wang, Ena; Wood, Lauren V; Marincola, Francesco M; Puri, Raj K; Stroncek, David F

2013-02-01

Cell-based immunotherapies are among the most promising approaches for developing effective and targeted immune response. However, their clinical usefulness and the evaluation of their efficacy rely heavily on complex quality control assessment. Therefore, rapid systematic methods are urgently needed for the in-depth characterization of relevant factors affecting newly developed cell product consistency and the identification of reliable markers for quality control. Using dendritic cells (DCs) as a model, we present a strategy to comprehensively characterize manufactured cellular products in order to define factors affecting their variability, quality and function. After generating clinical grade human monocyte-derived mature DCs (mDCs), we tested by gene expression profiling the degrees of product consistency related to the manufacturing process and variability due to intra- and interdonor factors, and how each factor affects single gene variation. Then, by calculating for each gene an index of variation we selected candidate markers for identity testing, and defined a set of genes that may be useful comparability and potency markers. Subsequently, we confirmed the observed gene index of variation in a larger clinical data set. In conclusion, using high-throughput technology we developed a method for the characterization of cellular therapies and the discovery of novel candidate quality assurance markers.

Dynamic aspects of apparent attenuation and wave localization in layered media

USGS Publications Warehouse

Haney, M.M.; Van Wijk, K.

2008-01-01

We present a theory for multiply-scattered waves in layered media which takes into account wave interference. The inclusion of interference in the theory leads to a new description of the phenomenon of wave localization and its impact on the apparent attenuation of seismic waves. We use the theory to estimate the localization length at a CO2 sequestration site in New Mexico at sonic frequencies (2 kHz) by performing numerical simulations with a model taken from well logs. Near this frequency, we find a localization length of roughly 180 m, leading to a localization-induced quality factor Q of 360.

Factors related to quality of life for patients with type 2 diabetes with or without depressive symptoms - results from a community-based study in China.

PubMed

Liu, Yu; Maier, Manfred; Hao, Yufang; Chen, Yan; Qin, Yuelan; Huo, Ran

2013-01-01

To explore the factors related to quality of life for patients with type 2 diabetes with or without depressive symptoms in China. In patients with type 2 diabetes with or without depressive symptoms, different factors such as gender, social context or regional setting may affect their quality of life. This was a cross-sectional study. Of 791 registered patients with type 2 diabetes from four communities in Beijing, cluster sampling was used to recruit patients for participation. Self-rating depression scale was used to screen for depressive symptoms; demographic and clinical data were collected, and quality of life and social support were assessed using appropriate tools. The factors associated with quality of life were tested using multivariate linear regression. The prevalence of depressive symptoms in 667 patients with diabetes was 44·2%. Quality of life of patients with depressive symptoms was worse than that of patients without depressive symptoms, and this was associated negatively with history of diabetic complications, usage of hypoglycaemic agents or insulin and self-rating depression scale scores and positively with salary and subjective social support. The factors related to quality of life for patients with or without depressive symptoms are different. For patients with depressive symptoms, better salary and subjective social support are associated positively with their quality of life, while the presence of diabetic complications, a higher score for depressive symptoms and need for hypoglycaemic agents or insulin are negatively associated with quality of life. It is suggested that the nurse should screen depression for patients with diabetes, especially for those with diabetic complications or low social support. This should be done in the community regularly in order to find diabetic patients with depression in time. In addition, the results can provide a reference to clinical nursing care for patients with diabetes in hospitals. © 2012 Blackwell Publishing Ltd.

Cone-beam computed tomography in the assessment of periapical lesions in endodontically treated teeth

PubMed Central

Gambarini, Gianluca; Piasecki, Lucila; Miccoli, Gabriele; Gaimari, Gianfranco; Nardo, Dario Di; Testarelli, Luca

2018-01-01

Objective: This study aimed to evaluate the relationship between the quality of the coronal restoration and the root canal filling on the periapical status of endodontically treated teeth using CBCT. Materials and Methods: CBCT data were obtained from the records of patients who deny any dental treatment in the 2 years prior to the CBCT examination. CBCT images (90 kVp and 7 mA, exposure time of 23 s, and a voxel size of 0.2 mm, with a field of view of 13 cm × 13 cm) of 1011 endodontically treated teeth were observed. A score was given to the quality of the root filling and the quality of the coronal restoration. Statistical Analysis Used: Data were statistically analyzed to correlate the periapical status with gender, dental group. and quality of endodontic treatment and restoration (Chi-square test with a significance level of P < 0.001). Results: Absence of periapical periodontitis was found in 54.9% of the cases. The periapical outcome was not related to gender or dental group (P > 0.05). A statistically significant factor (Chi-square test, P < 0.0001) resulted when different qualities of sealing were compared. Conclusions: CBCT showed that high-quality root canal treatments followed by an adequate coronal sealing restoration avoid the presence of periapical periodontitis in time. PMID:29657539

Physicochemical analysis and adequation of olive oil mill wastewater after advanced oxidation process for reclamation by pressure-driven membrane technology.

PubMed

Ochando-Pulido, Javier Miguel; Victor-Ortega, Maria Dolores; Hodaifa, Gassan; Martinez-Ferez, Antonio

2015-01-15

Physicochemical characterization of olive mill wastewaters (OMW) was studied after a primary and secondary treatment was implemented in an olive oil factory in Jaén (Spain), comprising natural precipitation, Fenton-like reaction, flocculation-sedimentation and olive stone filtration in series. The application of membrane technology in improving the quality of the secondary-treated OMW (OMW/ST) was examined, to reduce the hazardous electroconductivity (EC) values (2-3 mS cm(-1)). Particle size distribution on OMW/ST shows supra-micron colloids and suspended solids as well as sub-micron particles with a mean size below 1.5 μm remaining in considerable concentration. The high organic pollutants percentage (31.7%) registered with an average diameter below 3 kDa is sensibly relevant for membrane fouling. Mesophilic aerobic bacteria growth warns of possible membrane biofouling formation. The saturation index indicates to work upon recovery factor below 90%. Finally, operating at a pressure equal to 15 bar ensured low fouling and high flux production on the selected NF membrane (69.9 L h(-1)m(-2)) and significant rejection efficiencies (55.5% and 88.5% for EC and COD). This permits obtaining an effluent with good quality according to the recommendations of the Food and Agricultural Association (FAO) with the goal of reusing the regenerated water for irrigation. Copyright © 2014 Elsevier B.V. All rights reserved.

Modeling analysis of secondary inorganic aerosols over China: pollution characteristics, and meteorological and dust impacts.

PubMed

Fu, Xiao; Wang, Shuxiao; Chang, Xing; Cai, Siyi; Xing, Jia; Hao, Jiming

2016-10-26

Secondary inorganic aerosols (SIA) are the predominant components of fine particulate matter (PM 2.5 ) and have significant impacts on air quality, human health, and climate change. In this study, the Community Multiscale Air Quality modeling system (CMAQ) was modified to incorporate SO 2 heterogeneous reactions on the surface of dust particles. The revised model was then used to simulate the spatiotemporal characteristics of SIA over China and analyze the impacts of meteorological factors and dust on SIA formation. Including the effects of dust improved model performance for the simulation of SIA concentrations, particularly for sulfate. The simulated annual SIA concentration in China was approximately 10.1 μg/m 3 on domain average, with strong seasonal variation: highest in winter and lowest in summer. High SIA concentrations were concentrated in developed regions with high precursor emissions, such as the North China Plain, Yangtze River Delta, Sichuan Basin, and Pearl River Delta. Strong correlations between meteorological factors and SIA pollution levels suggested that heterogeneous reactions under high humidity played an important role on SIA formation, particularly during severe haze pollution periods. Acting as surfaces for heterogeneous reactions, dust particles significantly affected sulfate formation, suggesting the importance of reducing dust emissions for controlling SIA and PM 2.5 pollution.

Community Vulnerability to Health Impacts of Wildland Fire Smoke Exposure.

PubMed

Rappold, Ana G; Reyes, Jeanette; Pouliot, George; Cascio, Wayne E; Diaz-Sanchez, David

2017-06-20

Identifying communities vulnerable to adverse health effects from exposure to wildfire smoke may help prepare responses, increase the resilience to smoke and improve public health outcomes during smoke days. We developed a Community Health-Vulnerability Index (CHVI) based on factors known to increase the risks of health effects from air pollution and wildfire smoke exposures. These factors included county prevalence rates for asthma in children and adults, chronic obstructive pulmonary disease, hypertension, diabetes, obesity, percent of population 65 years of age and older, and indicators of socioeconomic status including poverty, education, income and unemployment. Using air quality simulated for the period between 2008 and 2012 over the continental U.S. we also characterized the population size at risk with respect to the level and duration of exposure to fire-originated fine particulate matter (fire-PM 2.5 ) and CHVI. We estimate that 10% of the population (30.5 million) lived in the areas where the contribution of fire-PM 2.5 to annual average ambient PM 2.5 was high (>1.5 μg/m 3 ) and that 10.3 million individuals experienced unhealthy air quality levels for more than 10 days due to smoke. Using CHVI we identified the most vulnerable counties and determined that these communities experience more smoke exposures in comparison to less vulnerable communities.

Modeling analysis of secondary inorganic aerosols over China: pollution characteristics, and meteorological and dust impacts

NASA Astrophysics Data System (ADS)

Fu, Xiao; Wang, Shuxiao; Chang, Xing; Cai, Siyi; Xing, Jia; Hao, Jiming

2016-10-01

Secondary inorganic aerosols (SIA) are the predominant components of fine particulate matter (PM2.5) and have significant impacts on air quality, human health, and climate change. In this study, the Community Multiscale Air Quality modeling system (CMAQ) was modified to incorporate SO2 heterogeneous reactions on the surface of dust particles. The revised model was then used to simulate the spatiotemporal characteristics of SIA over China and analyze the impacts of meteorological factors and dust on SIA formation. Including the effects of dust improved model performance for the simulation of SIA concentrations, particularly for sulfate. The simulated annual SIA concentration in China was approximately 10.1 μg/m3 on domain average, with strong seasonal variation: highest in winter and lowest in summer. High SIA concentrations were concentrated in developed regions with high precursor emissions, such as the North China Plain, Yangtze River Delta, Sichuan Basin, and Pearl River Delta. Strong correlations between meteorological factors and SIA pollution levels suggested that heterogeneous reactions under high humidity played an important role on SIA formation, particularly during severe haze pollution periods. Acting as surfaces for heterogeneous reactions, dust particles significantly affected sulfate formation, suggesting the importance of reducing dust emissions for controlling SIA and PM2.5 pollution.

Modeling analysis of secondary inorganic aerosols over China: pollution characteristics, and meteorological and dust impacts

PubMed Central

Fu, Xiao; Wang, Shuxiao; Chang, Xing; Cai, Siyi; Xing, Jia; Hao, Jiming

2016-01-01

Secondary inorganic aerosols (SIA) are the predominant components of fine particulate matter (PM2.5) and have significant impacts on air quality, human health, and climate change. In this study, the Community Multiscale Air Quality modeling system (CMAQ) was modified to incorporate SO2 heterogeneous reactions on the surface of dust particles. The revised model was then used to simulate the spatiotemporal characteristics of SIA over China and analyze the impacts of meteorological factors and dust on SIA formation. Including the effects of dust improved model performance for the simulation of SIA concentrations, particularly for sulfate. The simulated annual SIA concentration in China was approximately 10.1 μg/m3 on domain average, with strong seasonal variation: highest in winter and lowest in summer. High SIA concentrations were concentrated in developed regions with high precursor emissions, such as the North China Plain, Yangtze River Delta, Sichuan Basin, and Pearl River Delta. Strong correlations between meteorological factors and SIA pollution levels suggested that heterogeneous reactions under high humidity played an important role on SIA formation, particularly during severe haze pollution periods. Acting as surfaces for heterogeneous reactions, dust particles significantly affected sulfate formation, suggesting the importance of reducing dust emissions for controlling SIA and PM2.5 pollution. PMID:27782166

CT angiography of the aorta using 80 kVp in combination with sinogram-affirmed iterative reconstruction and automated tube current modulation: Effects on image quality and radiation dose.

PubMed

Boos, Johannes; Aissa, Joel; Lanzman, Rotem S; Heusch, Philipp; Schimmöller, Lars; Schleich, Christoph; Thomas, Christoph; Antoch, Gerald; Kröpil, Patric

2016-04-01

The objective of this study was to evaluate image quality and radiation dose of a CT angiography (CTA) protocol using 80 kVp in combination with iterative reconstruction and automated tube current modulation. Ninety-five aortic CTA examinations were included in this study. A novel 80 kVp aortic CTA-protocol with iterative reconstruction was introduced in our department in March 2012 for patients with a body mass index (BMI) below 32 kg/m(2). The first 72 consecutive examinations were retrospectively assigned to group A (56 patients, 42 men, 14 women, mean age 69.6 ± 10.7 years, BMI range 19.7-31.1 kg/m(2)). For comparison, the last 23 consecutive examinations performed with the old protocol (100 kVp) were assigned to group B (21 patients, 13 men, 8 women, mean age 67.4 ± 11.1 years, BMI range 19.7-31.9 kg/m(2)). Thoracic and abdominal contrast-to-noise ratio (CNR), signal-to-noise ratio (SNR) and aortic attenuation were assessed. Subjective image quality was rated on a 5-point scale (1 = non diagnostic; 5 = excellent). Furthermore, dose length product (DLP) and volumetric computed tomography dose index (CTDIvol) were analysed. All examinations achieved diagnostic image quality. Attenuation of the aorta was significantly higher in group A compared with B (thoracic: 443.5 ± 90.5 Hounsfield units (HU) vs. 296.0 ± 61.0 HU; abdominal: 426.3 ± 94.2 HU vs. 283.6 ± 60.5 HU; P < 0.05, respectively). CNR, SNR and subjective image quality were comparable between both groups (CNR: 12.8 ± 3.7 vs. 13.0 ± 7.4; SNR 14.4 ± 3.9 vs. 14.9 ± 8.2; subjective image quality: 4.3 ± 0.6 vs. 4.5 ± 0.6; P > 0.05, respectively). CTDIvol and DLP were significantly lower in group A (1.9 ± 0.5 mGy; 139.2 ± 41.1 mGy × cm) as compared with group B (4.2 ± 1.4 mGy; 292.1 ± 91.5 mGy × cm; P < 0.001, respectively). Low-dose CTA of the aorta using 80 kVp with iterative reconstruction enables a significant dose reduction of up to 50% compared with a 100 kVp protocol in patients with a BMI below 32 kg/m(2) while diagnostic image quality is maintained. © 2016 The Royal Australian and New Zealand College of Radiologists.

Robotic operation of the Observatorio Astrofísico de Javalambre

NASA Astrophysics Data System (ADS)

Yanes-Díaz, A.; Antón, J. L.; Rueda-Teruel, S.; Guillén-Civera, L.; Bello, R.; Jiménez-Mejías, D.; Chueca, S.; Lasso-Cabrera, N. M.; Suárez, O.; Rueda-Teruel, F.; Cenarro, A. J.; Cristóbal-Hornillos, D.; Marín-Franch, A.; Luis-Simoes, R.; López-Alegre, G.; Rodríguez-Hernández, M. A. C.; Moles, M.; Ederoclite, A.; Varela, J.; Vázquez Ramió, H.; Díaz-Martí, M. C.; Iglesias-Marzoa, R.; Maicas, N.; Lamadrid, J. L.; López-Sainz, A.; Hernández-Fuertes, J.; Valdivielso, L.

2015-05-01

The Observatorio Astrofísico de Javalambre (OAJ) is a new astronomical facility located at the Sierra de Javalambre (Teruel, Spain) whose primary role will be to conduct all-sky astronomical surveys with two unprecedented telescopes of unusually large fields of view: the JST/T250, a 2.55 m telescope of 3 deg field of view, and the JAST/T80, an 83 cm telescope of 2 deg field of view. CEFCA engineering team has been designing the OAJ control system as a global concept to manage, monitor, control and maintain all the observatory systems including not only astronomical subsystems but also infrastructure and other facilities. Three main factors have been considered in the design of a global control system for the robotic OAJ: quality, reliability and efficiency. We propose CIA (Control Integrated Architecture) design and OEE (Overall Equipment Effectiveness) as a key performance indicator in order to improve operation processes, minimizing resources and obtain high cost reduction maintaining quality requirements. Here we present the OAJ robotic control strategy to achieve maximum quality efficiency for the observatory surveys, processes and operations, giving practical examples of our approach.

Compact SOI optimized slot microring coupled phase-shifted Bragg grating resonator for sensing

NASA Astrophysics Data System (ADS)

Zhao, Chao Ying; Zhang, Lei; Zhang, Cheng Mei

2018-05-01

We propose a novel sensor structure composed of a slot microring and a phase-shifted sidewall Bragg gratings in a slot waveguide. We first present a theoretical analysis of transmission by using the transfer matrix. Then, the mode-field distributions of transmission spectrum obtained from 3D simulations based on FDTD method demonstrates that our sensor exhibit theoretical sensitivity of 297 . 13 nm / RIU, a minimum detection limit of 1 . 1 × 10-4 RIU, the maximum extinction ratio of 20 dB, the quality factor of 2 × 103 and a compact dimension-theoretical structure of 15 μm × 8 . 5 μm. Finally, the sensor's performance is simulated for NaCl solution.

Fatigue - but not mTBI history, PTSD, or sleep quality - directly contributes to reduced prospective memory performance in Iraq and Afghanistan era Veterans.

PubMed

Rau, Holly K; Hendrickson, Rebecca; Roggenkamp, Hannah C; Peterson, Sarah; Parmenter, Brett; Cook, David G; Peskind, Elaine; Pagulayan, Kathleen F

2017-10-13

Memory problems that affect daily functioning are a frequent complaint among Veterans reporting a history of repetitive mild traumatic brain injury (mTBI), especially in cohorts with comorbid PTSD. Here, we test the degree to which subjective sleep impairment and daytime fatigue account for the association of PTSD and self-reported mTBI history with prospective memory. 82 Veterans with and without personal history of repeated blast-related mTBI during deployment were administered the Clinician Administered PTSD Scale (CAPS), Memory for Intentions Test (MIST), Patient Health Questionnaire-9 (PHQ-9), Neurobehavioral Symptom Inventory (NSI), and the Pittsburgh Sleep Quality Index (PSQI). Relationships between self-reported mTBI, PTSD, self-reported poor sleep and daytime fatigue, and MIST performance were modeled using partial least squares structural equation modeling (PLS-SEM). Reported daytime fatigue was strongly associated with poorer prospective memory performance. Poor subjective sleep quality was strongly and positively associated with reported daytime fatigue, but had no significant direct effect on prospective memory performance. PTSD diagnosis and self-reported mTBI history were only associated with prospective memory via their impact on subjective sleep quality and daytime fatigue. Results suggest that daytime fatigue may be a mediating factor by which both mTBI and PTSD can interfere with prospective memory. Additional attention should be given to complaints of daytime fatigue, independent of subjective sleep quality, in the clinical care of those with a self-reported history of mTBI, and/or PTSD. Further research into whether interventions that decrease daytime fatigue lead to improvement in prospective memory and subjective cognitive functioning is warranted.

Measuring Environmental Factors: Unique and Overlapping International Classification of Functioning, Disability and Health Coverage of 5 Instruments.

PubMed

Heinemann, Allen W; Miskovic, Ana; Semik, Patrick; Wong, Alex; Dashner, Jessica; Baum, Carolyn; Magasi, Susan; Hammel, Joy; Tulsky, David S; Garcia, Sofia F; Jerousek, Sara; Lai, Jin-Shei; Carlozzi, Noelle E; Gray, David B

2016-12-01

To describe the unique and overlapping content of the newly developed Environmental Factors Item Banks (EFIB) and 7 legacy environmental factor instruments, and to evaluate the EFIB's construct validity by examining associations with legacy instruments. Cross-sectional, observational cohort. Community. A sample of community-dwelling adults with stroke, spinal cord injury, and traumatic brain injury (N=568). None. EFIB covering domains of the built and natural environment; systems, services, and policies; social environment; and access to information and technology; the Craig Hospital Inventory of Environmental Factors (CHIEF) short form; the Facilitators and Barriers Survey/Mobility (FABS/M) short form; the Home and Community Environment Instrument (HACE); the Measure of the Quality of the Environment (MQE) short form; and 3 of the Patient Reported Outcomes Measurement Information System's (PROMIS) Quality of Social Support measures. The EFIB and legacy instruments assess most of the International Classification of Functioning, Disability and Health (ICF) environmental factors chapters, including chapter 1 (products and technology; 75 items corresponding to 11 codes), chapter 2 (natural environment and human-made changes; 31 items corresponding to 7 codes), chapter 3 (support and relationships; 74 items corresponding to 7 codes), chapter 4 (attitudes; 83 items corresponding to 8 codes), and chapter 5 (services, systems, and policies; 72 items corresponding to 16 codes). Construct validity is provided by moderate correlations between EFIB measures and the CHIEF, MQE barriers, HACE technology mobility, FABS/M community built features, and PROMIS item banks and by small correlations with other legacy instruments. Only 5 of the 66 legacy instrument correlation coefficients are moderate, suggesting they measure unique aspects of the environment, whereas all intra-EFIB correlations were at least moderate. The EFIB measures provide a brief and focused assessment of ICF environmental factor chapters. The pattern of correlations with legacy instruments provides initial evidence of construct validity. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Moderate-to-high normal levels of thyrotropin is a risk factor for urinary incontinence and an unsuitable quality of life in women over 65 years.

PubMed

Cuevas-Romero, Estela; Sánchez-Cardiel, Angélica; Zamora-Gallegos, Angélica M; Cruz-Lumbreras, Rosalía; Corona-Quintanilla, Dora L; Castelán, Francisco; Martínez-Gómez, Margarita

2017-12-01

The present study aimed to investigate the relationship between normal serum concentrations of thyrotropin (TSH) and urinary incontinence (IU), urinary infections, and quality of life in old women. Euthyroid post-menopausal women without sarcopenia, estrogen replacement, emotional illness, and/or cancer were enrolled as participants. Anthropometric indicators, serum glucose and estradiol, and thyroid profile were measured. Sociodemographic, clinical, physical activity, and quality of life (SF-36) surveys were applied. One-hour pad test and International Consultation on Incontinence Questionnaire Short Form (ICIQ-SF) were used to determine UI. Urinalysis was also done. In agreement with results from the pad test (cut-off point ≥1.4 g), the ICIQ-SF reveled approximately 50% of incontinent women. A high percentage of women had moderate-high bacteriuria and urinary infections. Logistic regression analysis showed that age is a risk factor for both UI and urinary infection. Diabetes, number of pregnancies or childbirths, urinary infections, and bacteriuria did not influence the presence of UI. To allocate women into four groups according to their age (<65 or ≥65 years old) and TSH concentrations (0.3-1.9 or 2-10 μUI/mL), we found that moderate-to-high normal levels of TSH is a risk factor for UI and a worse quality of life in the oldest women. Our results highlight the profit of measuring TSH concentrations in post-menopausal women. © 2017 John Wiley & Sons Australia, Ltd.

Inhibitory effect of chlorine and ultraviolet radiation on growth of Listeria monocytogenes in chicken breast and development of predictive growth models.

PubMed

Oh, S R; Kang, I; Oh, M H; Ha, S D

2014-01-01

The inhibitory effect of chlorine (50, 100, and 200 mg/kg) was investigated with and without UV radiation (300 mW·s/cm(2)) for the growth of Listeria monocytogenes in chicken breast meat. Using a polynomial model, predictive growth models were also developed as a function of chlorine concentration, UV exposure, and storage temperature (4, 10, and 15°C). A maximum L. monocytogenes reduction (0.8 log cfu, cfu/g) was obtained when combining chlorine at 200 mg/kg and UV at 300 mW·s/cm(2), and a maximum synergistic effect (0.4 log cfu/g) was observed when using chlorine at 100 mg/kg and UV at 300 mW·s/cm(2). Primary models developed for specific growth rate and lag time showed a good fitness (R(2) > 0.91), as determined by the reparameterized Gompertz equation. Secondary polynomial models were obtained using nonlinear regression analysis. The developed models were validated with mean square error, bias factor, and accuracy factor, which were 0.0003, 0.96, and 1.11, respectively, for specific growth rate and 7.69, 0.99, and 1.04, respectively, for lag time. The treatment of chlorine and UV did not change the color and texture of chicken breast after 7 d of storage at 4°C. As a result, the combination of chlorine at 100 mg/kg and UV at 300 mW·s/cm(2) appears to an effective method into inhibit L. monocytogenes growth in broiler carcasses with no negative effects on color and textural quality. Based on the validation results, the predictive models can be used to accurately predict L. monocytogenes growth in chicken breast.

A definition for aggressive disease in patients with HER-2 negative metastatic breast cancer: an expert consensus of the Spanish Society of Medical Oncology (SEOM).

PubMed

González, A; Lluch, A; Aba, E; Albanell, J; Antón, A; Álvarez, I; Ayala, F; Barnadas, A; Calvo, L; Ciruelos, E; Cortés, J; de la Haba, J; López-Vega, J M; Martínez, E; Muñoz, M; Peláez, I; Redondo, A; Rodríguez, Á; Rodríguez, C A; Ruíz, A; Llombart, A

2017-05-01

To converge on an expert opinion to define aggressive disease in patients with HER2-negative mBC using a modified Delphi methodology. A panel of 21 breast cancer experts from the Spanish Society of Medical Oncology agreed upon a survey which comprised 47 questions that were grouped into three sections: relevance for defining aggressive disease, aggressive disease criteria and therapeutic goals. Answers were rated using a 9-point Likert scale of relevance or agreement. Among the 88 oncologists that were invited to participate, 81 answered the first round (92%), 70 answered the second round (80%), and 67 answered the third round (76%) of the survey. There was strong agreement regarding the fact that identifying patients with aggressive disease needs to be adequately addressed to help practitioners to decide the best treatment options for patients with HER2-negative mBC. The factors that were considered to be strongly relevant to classifying patients with aggressive HER2-negative mBC were a high tumor burden, a disease-free interval of less than 12-24 months after surgery, the presence of progressive disease during adjuvant or neoadjuvant chemotherapy and having a triple-negative phenotype. The main therapeutic goals were controlling symptoms, improving quality of life and increasing the time to progression and overall survival. High tumor burden, time to recurrence after prior therapy and having a triple-negative phenotype were the prognostic factors for which the greatest consensus was found for identifying patients with aggressive HER2-negative mBC. Identifying patients with aggressive disease leads to different therapeutic approaches.

Quantification of source impact to PM using three-dimensional weighted factor model analysis on multi-site data

NASA Astrophysics Data System (ADS)

Shi, Guoliang; Peng, Xing; Huangfu, Yanqi; Wang, Wei; Xu, Jiao; Tian, Yingze; Feng, Yinchang; Ivey, Cesunica E.; Russell, Armistead G.

2017-07-01

Source apportionment technologies are used to understand the impacts of important sources of particulate matter (PM) air quality, and are widely used for both scientific studies and air quality management. Generally, receptor models apportion speciated PM data from a single sampling site. With the development of large scale monitoring networks, PM speciation are observed at multiple sites in an urban area. For these situations, the models should account for three factors, or dimensions, of the PM, including the chemical species concentrations, sampling periods and sampling site information, suggesting the potential power of a three-dimensional source apportionment approach. However, the principle of three-dimensional Parallel Factor Analysis (Ordinary PARAFAC) model does not always work well in real environmental situations for multi-site receptor datasets. In this work, a new three-way receptor model, called "multi-site three way factor analysis" model is proposed to deal with the multi-site receptor datasets. Synthetic datasets were developed and introduced into the new model to test its performance. Average absolute error (AAE, between estimated and true contributions) for extracted sources were all less than 50%. Additionally, three-dimensional ambient datasets from a Chinese mega-city, Chengdu, were analyzed using this new model to assess the application. Four factors are extracted by the multi-site WFA3 model: secondary source have the highest contributions (64.73 and 56.24 μg/m3), followed by vehicular exhaust (30.13 and 33.60 μg/m3), crustal dust (26.12 and 29.99 μg/m3) and coal combustion (10.73 and 14.83 μg/m3). The model was also compared to PMF, with general agreement, though PMF suggested a lower crustal contribution.

Average glandular dose in paired digital mammography and digital breast tomosynthesis acquisitions in a population based screening program: effects of measuring breast density, air kerma and beam quality

NASA Astrophysics Data System (ADS)

Helge Østerås, Bjørn; Skaane, Per; Gullien, Randi; Catrine Trægde Martinsen, Anne

2018-02-01

The main purpose was to compare average glandular dose (AGD) for same-compression digital mammography (DM) and digital breast tomosynthesis (DBT) acquisitions in a population based screening program, with and without breast density stratification, as determined by automatically calculated breast density (Quantra™). Secondary, to compare AGD estimates based on measured breast density, air kerma and half value layer (HVL) to DICOM metadata based estimates. AGD was estimated for 3819 women participating in the screening trial. All received craniocaudal and mediolateral oblique views of each breasts with paired DM and DBT acquisitions. Exposure parameters were extracted from DICOM metadata. Air kerma and HVL were measured for all beam qualities used to acquire the mammograms. Volumetric breast density was estimated using Quantra™. AGD was estimated using the Dance model. AGD reported directly from the DICOM metadata was also assessed. Mean AGD was 1.74 and 2.10 mGy for DM and DBT, respectively. Mean DBT/DM AGD ratio was 1.24. For fatty breasts: mean AGD was 1.74 and 2.27 mGy for DM and DBT, respectively. For dense breasts: mean AGD was 1.73 and 1.79 mGy, for DM and DBT, respectively. For breasts of similar thickness, dense breasts had higher AGD for DM and similar AGD for DBT. The DBT/DM dose ratio was substantially lower for dense compared to fatty breasts (1.08 versus 1.33). The average c-factor was 1.16. Using previously published polynomials to estimate glandularity from thickness underestimated the c-factor by 5.9% on average. Mean AGD error between estimates based on measurements (air kerma and HVL) versus DICOM header data was 3.8%, but for one mammography unit as high as 7.9%. Mean error of using the AGD value reported in the DICOM header was 10.7 and 13.3%, respectively. Thus, measurement of breast density, radiation dose and beam quality can substantially affect AGD estimates.

Average glandular dose in paired digital mammography and digital breast tomosynthesis acquisitions in a population based screening program: effects of measuring breast density, air kerma and beam quality.

PubMed

Østerås, Bjørn Helge; Skaane, Per; Gullien, Randi; Martinsen, Anne Catrine Trægde

2018-01-25

The main purpose was to compare average glandular dose (AGD) for same-compression digital mammography (DM) and digital breast tomosynthesis (DBT) acquisitions in a population based screening program, with and without breast density stratification, as determined by automatically calculated breast density (Quantra ™ ). Secondary, to compare AGD estimates based on measured breast density, air kerma and half value layer (HVL) to DICOM metadata based estimates. AGD was estimated for 3819 women participating in the screening trial. All received craniocaudal and mediolateral oblique views of each breasts with paired DM and DBT acquisitions. Exposure parameters were extracted from DICOM metadata. Air kerma and HVL were measured for all beam qualities used to acquire the mammograms. Volumetric breast density was estimated using Quantra ™ . AGD was estimated using the Dance model. AGD reported directly from the DICOM metadata was also assessed. Mean AGD was 1.74 and 2.10 mGy for DM and DBT, respectively. Mean DBT/DM AGD ratio was 1.24. For fatty breasts: mean AGD was 1.74 and 2.27 mGy for DM and DBT, respectively. For dense breasts: mean AGD was 1.73 and 1.79 mGy, for DM and DBT, respectively. For breasts of similar thickness, dense breasts had higher AGD for DM and similar AGD for DBT. The DBT/DM dose ratio was substantially lower for dense compared to fatty breasts (1.08 versus 1.33). The average c-factor was 1.16. Using previously published polynomials to estimate glandularity from thickness underestimated the c-factor by 5.9% on average. Mean AGD error between estimates based on measurements (air kerma and HVL) versus DICOM header data was 3.8%, but for one mammography unit as high as 7.9%. Mean error of using the AGD value reported in the DICOM header was 10.7 and 13.3%, respectively. Thus, measurement of breast density, radiation dose and beam quality can substantially affect AGD estimates.

Comparison Between Prospectively Electrocardiogram-Gated High-Pitch Mode and Retrospectively Electrocardiogram-Gated Mode for Dual-Source CT Coronary Angiography.

PubMed

Koplay, Mustafa; Celik, Mahmut; Avcı, Ahmet; Erdogan, Hasan; Demir, Kenan; Sivri, Mesut; Nayman, Alaaddin

2015-01-01

We aimed to report the image quality, relationship between heart rate and image quality, amount of contrast agent given to the patients and radiation doses in coronary CT angiography (CTA) obtained by using high-pitch prospectively ECG-gated "Flash Spiral" technique (method A) or retrospectively ECG-gated technique (method B) using 128×2-slice dual-source CT. A total of 110 patients who were evaluated with method A and method B technique with a 128×2-detector dual-source CT device were included in the study. Patients were divided into three groups based on their heart rates during the procedure, and a relationship between heart rate and image quality were evaluated. The relationship between heart rate, gender and radiation dose received by the patients was compared. A total of 1760 segments were evaluated in terms of image quality. Comparison of the relationship between heart rate and image quality revealed a significant difference between heart rate <60 beats/min group and >75 beats/min group whereas <60 beats/min and 60-75 beats/min groups did not differ significantly. The average effective dose for coronary CTA was calculated as 1.11 mSv (0.47-2.01 mSv) for method A and 8.22 mSv (2.19-12.88 mSv) for method B. Method A provided high quality images with doses as low as <1 mSv in selected patients who have low heart rates with a high negative predictive value to rule out coronary artery disease. Although method B increases the amount of effective dose, it provides high diagnostic quality images for patients who have a high heart rate and arrhythmia which makes it is difficult to obtain images.

Seasonal-Spatial Distribution and Long-Term Variation of Transparency in Xin’anjiang Reservoir: Implications for Reservoir Management

PubMed Central

Wu, Zhixu; Zhang, Yunlin; Zhou, Yongqiang; Liu, Mingliang; Shi, Kun; Yu, Zuoming

2015-01-01

Water transparency is a useful indicator of water quality or productivity and is widely used to detect long-term changes in the water quality and eutrophication of lake ecosystems. Based on short-term spatial observations in the spring, summer, and winter and on long-term site-specific observation from 1988 to 2013, the spatial, seasonal, long-term variations, and the factors affecting transparency are presented for Xin’anjiang Reservoir (China). Spatially, transparency was high in the open water but low in the bays and the inflowing river mouths, reflecting the effect of river runoff. The seasonal effects were distinct, with lower values in the summer than in the winter, most likely due to river runoff and phytoplankton biomass increases. The transparency decreased significantly with a linear slope of 0.079 m/year, indicating a 2.05 m decrease and a marked decrease in water quality. A marked increase occurred in chlorophyll a (Chla) concentration, and a significant correlation was found between the transparency and Chla concentration, indicating that phytoplankton biomass can partially explain the long-term trend of transparency in Xin’anjiang Reservoir. The river input and phytoplankton biomass increase were associated with soil erosion and nutrient loss in the catchment. Our study will support future management of water quality in Xin’anjiang Reservoir. PMID:26274970

Polarization-dependent electromagnetic responses of ultrathin and highly flexible asymmetric terahertz metasurfaces

NASA Astrophysics Data System (ADS)

Burrow, Joshua A.; Yahiaoui, Riad; Sarangan, Andrew; Agha, Imad; Mathews, Jay; Searles, Thomas A.

2017-12-01

We report the polarization-dependent electromagnetic response from a series of novel terahertz (THz) metasurfaces where asymmetry is introduced through the displacement of two adjacent metallic arms separated by a distance $\\delta$. For all polarization states, the symmetric metasurface exhibits a low quality (Q) factor fundamental dipole mode. By breaking the symmetry, we experimentally observe a secondary dipole-like mode with a Q factor nearly $9\\times$ higher than the fundamental resonance. As $\\delta$ increases, the fundamental dipole mode $f_{1}$ redshifts and the secondary mode $f_{2}$ blueshifts creating a highly transmissive spectral window. Polarization-dependent measurements reveal a full suppression of $f_{2}$ for all asymmetries at $\\theta \\geq 60^\\circ$. Furthermore, at $\\delta \\geq 60 \\text{ }\\mu\\text{m}$, we observe a polarization selective electromagnetic induced transparency (EIT) for the fundamental mode. This work paves the way for applications in filtering, sensing and slow-light devices common to other high Q factor THz metasurfaces with EIT-like response.

Source apportionment of particulate matter and trace gases near a major refinery near the Houston Ship Channel

NASA Astrophysics Data System (ADS)

Wallace, Henry W.; Sanchez, Nancy P.; Flynn, James H.; Erickson, Mathew H.; Lefer, Barry L.; Griffin, Robert J.

2018-01-01

From February 7 to 27, 2015, a mobile air quality laboratory was deployed to a location proximate to a major refinery, the Port of Houston, and several neighborhoods to conduct measurements of atmospheric trace gases and particulate matter. Two statistical models were utilized to apportion the sources of pollution impacting this site and the denizens of the nearby neighborhoods. Positive matrix factorization (PMF) was performed on the organic signal of the aerosol mass spectra, resulting in five factors totaling an average of 4.1 μg/m3 of the organic aerosol: hydrocarbon-like (0.67 μg/m3), cooking (0.35 μg/m3) biomass burning (1.14 μg/m3), low-volatility oxidized (1.15 μg/m3), and semi-volatile oxidized (0.78 μg/m3). Principal component analysis was performed on daytime and nighttime data, including concentrations from PMF output, of other PM1 components, and of trace gases. This generated five daytime and five nighttime factors that explained 74.5% and 73.0% of the variance, respectively. The most important factors impacting this site were from mobile source exhaust and petrochemical aromatic compound emissions. Together these two factors also constitute most of the observed carcinogens.

Trends in the quality of care for elderly people with type 2 diabetes: the need for improvements in safety and quality (the 2001 and 2007 ENTRED Surveys).

PubMed

Pornet, Carole; Bourdel-Marchasson, Isabelle; Lecomte, Pierre; Eschwège, Eveline; Romon, Isabelle; Fosse, Sandrine; Assogba, Frank; Roudier, Candice; Fagot-Campagna, Anne

2011-04-01

This study aimed to characterize the sociodemographic data, health status, quality of care and 6-year trends in elderly people with type 2 diabetes. This study used two French cross-sectional representative surveys of adults of all ages with all types of diabetes (Entred 2001 and 2007), which combined medical claims, and patient and medical provider questionnaires. The 2007 data in patients with type 2 diabetes aged 65 years or over (n=1766) were described and compared with the 2001 data (n=1801). Since 2001, obesity has increased (35% in 2007; +7 points since 2001) while written nutritional advice was less often provided (59%; -6 points). Mean HbA(1c) (7.1%; -0.2%), blood pressure (135/76 mmHg; -4/-3 mmHg) and LDL cholesterol (1.04 g/L; -0.21 g/L) declined, while the use of medication increased: at least two OHAs, 34% (+4 points); OHA(s) and insulin combined, 10% (+4 points); antihypertensive treatment, 83% (+4 points); and statins 48% (+26 points). Severe hypoglycaemia remained frequent (10% had an event at least once a year). The overall prevalence of complications increased. Renal complications were not monitored carefully enough (missing value for albuminuria: 42%; -4.5 points), and 46% of those with a glomerular filtration rate less than 60 mL/min/1.73 m² were taking metformin. Elderly people with type 2 diabetes are receiving better quality of care and have better control of cardiovascular risk factors than before. However, improvement is still required, in particular by performing better screening for complications. In this patient population, it is important to carefully monitor the risks for hypoglycaemia, hypotension, malnutrition and contraindications related to renal function. Copyright © 2011 Elsevier Masson SAS. All rights reserved.

Emissions of NO and NH3 from a typical vegetable-land soil after the application of chemical N fertilizers in the Pearl River Delta.

PubMed

Li, Dejun

2013-01-01

Cropland soil is an important source of atmospheric nitric oxide (NO) and ammonia (NH3). Chinese croplands are characterized by intensive management, but limited information is available with regard to NO emissions from croplands in China and NH3 emissions in south China. In this study, a mesocosm experiment was conducted to measure NO and NH3 emissions from a typical vegetable-land soil in the Pearl River Delta following the applications of 150 kg N ha(-1) as urea, ammonium nitrate (AN) and ammonium bicarbonate (ABC), respectively. Over the sampling period after fertilization (72 days for NO and 39 days for NH3), mean NO fluxes (± standard error of three replicates) in the control and urea, AN and ABC fertilized mesocosms were 10.9±0.9, 73.1±2.9, 63.9±1.8 and 66.0±4.0 ng N m(-2) s(-1), respectively; mean NH3 fluxes were 8.9±0.2, 493.6±4.4, 144.8±0.1 and 684.7±8.4 ng N m(-2) s(-1), respectively. The fertilizer-induced NO emission factors for urea, AN and ABC were 2.6±0.1%, 2.2±0.1% and 2.3±0.2%, respectively. The fertilizer-induced NH3 emission factors for the three fertilizers were 10.9±0.2%, 3.1±0.1% and 15.2±0.4%, respectively. From the perspective of air quality protection, it would be better to increase the proportion of AN application due to its lower emission factors for both NO and NH3.

Is insufficient quantity and quality of sleep a risk factor for neck, shoulder and low back pain? A longitudinal study among adolescents.

PubMed

Auvinen, Juha P; Tammelin, Tuija H; Taimela, Simo P; Zitting, Paavo J; Järvelin, Marjo-Riitta; Taanila, Anja M; Karppinen, Jaro I

2010-04-01

The quantity and quality of adolescents' sleep may have changed due to new technologies. At the same time, the prevalence of neck, shoulder and low back pain has increased. However, only a few studies have investigated insufficient quantity and quality of sleep as possible risk factors for musculoskeletal pain among adolescents. The aim of the study was to assess whether insufficient quantity and quality of sleep are risk factors for neck (NP), shoulder (SP) and low back pain (LBP). A 2-year follow-up survey among adolescents aged 15-19 years was (2001-2003) carried out in a subcohort of the Northern Finland Birth Cohort 1986 (n = 1,773). The outcome measures were 6-month period prevalences of NP, SP and LBP. The quantity and quality of sleep were categorized into sufficient, intermediate or insufficient, based on average hours spent sleeping, and whether or not the subject suffered from nightmares, tiredness and sleeping problems. The odds ratios (OR) and 95% confidence intervals (CI) for having musculoskeletal pain were obtained through logistic regression analysis, adjusted for previously suggested risk factors and finally adjusted for specific pain status at 16 years. The 6-month period prevalences of neck, shoulder and low back pain were higher at the age of 18 than at 16 years. Insufficient quantity or quality of sleep at 16 years predicted NP in both girls (OR 4.4; CI 2.2-9.0) and boys (2.2; 1.2-4.1). Similarly, insufficient sleep at 16 years predicted LBP in both girls (2.9; 1.7-5.2) and boys (2.4; 1.3-4.5), but SP only in girls (2.3; 1.2-4.4). After adjustment for pain status, insufficient sleep at 16 years predicted significantly only NP (3.2; 1.5-6.7) and LBP (2.4; 1.3-4.3) in girls. Insufficient sleep quantity or quality was an independent risk factor for NP and LBP among girls. Future studies should test whether interventions aimed at improving sleep characteristics are effective in the prevention and treatment of musculoskeletal pain.

The Impact of Air Pollution, Including Asian Sand Dust, on Respiratory Symptoms and Health-related Quality of Life in Outpatients With Chronic Respiratory Disease in Korea: A Panel Study.

PubMed

Nakao, Motoyuki; Ishihara, Yoko; Kim, Cheol-Hong; Hyun, In-Gyu

2018-05-01

Air pollution is a growing concern in Korea because of transboundary air pollution from mainland China. A panel study was conducted to clarify the effects of air pollution on respiratory symptoms and health-related quality of life (HR-QoL) in outpatients with and without chronic obstructive pulmonary disease (COPD) in Korea. Patients filled out a questionnaire including self-reported HR-QoL in February and were followed up in May and July. The study was conducted from 2013 to 2015, with different participants each year. Air quality parameters were applied in a generalized estimating equation as independent variables to predict factors affecting HR-QoL. Lower physical fitness scores were associated with Asian sand dust events. Daily activity scores were worse when there were high concentrations of particulate matter (PM) less than 10 μm in diameter (PM 10 ). Lower social functioning scores were associated with high PM less than 2.5 μm in diameter and nitrogen dioxide (NO 2 ) concentrations. High NO 2 concentrations also showed a significant association with mental health scores. Weather-related cough was prevalent when PM 10 , NO 2 , or ozone (O 3 ) concentrations were high, regardless of COPD severity. High PM 10 concentrations were associated with worsened wheezing, particularly in COPD patients. The results suggest that PM, NO 2 , and O 3 cause respiratory symptoms leading to HR-QoL deterioration. While some adverse effects of air pollution appeared to occur regardless of COPD, others occurred more often and more intensely in COPD patients. The public sector, therefore, needs to consider tailoring air pollution countermeasures to people with different conditions to minimize adverse health effects.

Growth of monolayer MoS2 films in a quasi-closed crucible encapsulated substrates by chemical vapor deposition

NASA Astrophysics Data System (ADS)

Yang, Yong; Pu, Hongbin; Lin, Tao; Li, Lianbi; Zhang, Shan; Sun, Gaopeng

2017-07-01

Monolayer molybdenum disulfide (m-MoS2) has attracted significant interest due to its unique electronic and optical properties. Herein, we report the successful fabrication of high quality and continuous m-MoS2 films in a quasi-closed crucible encapsulated substrates via a three-zone chemical vapor deposition (CVD) system. Quasi-closed crucible lowers the concentration of precursors around substrates and makes the sulfurization rate gentle, which is beneficial for invariable m-MoS2 growth. Characterization results indicate that as-grown m-MoS2 films are of high crystallinity and high quality comparable to the exfoliated MoS2. This approach is also adapted to the growth of other transition metal dichalcogenides.

Quality of 99mTcO4- from 99Mo Produced by 100Mo(n,2n)99Mo

NASA Astrophysics Data System (ADS)

Nagai, Yasuki; Nakahara, Yuto; Kawabata, Masako; Hatsukawa, Yuichi; Hashimoto, Kazuyuki; Saeki, Hideya; Motoishi, Shoji; Ohta, Akio; Shiina, Takayuki; Kawauchi, Yukimasa

2017-05-01

The pharmaceutical quality of 99mTc pertechnetate solution obtained from 99Mo, the 100Mo(n,2n) reaction product, was investigated for the first time with an emphasis on the nonradioactive Mo content and endotoxin concentration. They were less than the tolerance dose given in international guidelines and the established upper limit in an international pharmacopoeia, respectively. Four other quality control tests commonly used for a commercially available 99mTc pertechnetate solution also demonstrated to meet the United States Pharmacopeia requirements. The results strongly support that the thermochromatographic separation method used to separate 99mTc from 99Mo can be a promising substitute for the fission product 99Mo.

Three-dimensional ordered macroporous bismuth vanadates: PMMA-templating fabrication and excellent visible light-driven photocatalytic performance for phenol degradation

NASA Astrophysics Data System (ADS)

Liu, Yuxi; Dai, Hongxing; Deng, Jiguang; Zhang, Lei; Au, Chak Tong

2012-03-01

Three-dimension ordered macroporous (3D-OM) bismuth vanadates with a monoclinic crystal structure and high surface area (18-24 m2 g-1) have been prepared using ascorbic acid (AA)- or citric acid (CA)-assisted poly(methyl methacrylate) (PMMA)-templating strategy with bismuth nitrate and ammonium metavanadate as the metal sources, HNO3 as the pH adjuster and ethylene glycol and methanol as the solvent. The materials were characterized by a number of analytical techniques. The photocatalytic performance of the porous BiVO4 samples was evaluated for the degradation of phenol in the presence of a small amount of H2O2 under visible light illumination. The effects of the initial phenol concentration and the H2O2 amount on the photocatalytic activity of the photocatalyst were examined. It is shown that the chelating agent, AA or CA, and the amount in which it is added had a significant impact on the quality of the 3D-OM structure, with a ``(Bi + V) : chelating agent'' molar ratio of 2 : 1 being the most appropriate. Among the as-prepared BiVO4 samples, the one with a surface area of ca. 24 m2 g-1 showed the best visible light-driven photocatalytic performance for phenol degradation (phenol conversion = ca. 94% at phenol concentration = 0.1 mmol L-1 and in the presence of 0.6 mL H2O2). A higher phenol conversion could be achieved within the same reaction time if the phenol concentration in the aqueous solution was lowered, but an excess amount of H2O2 was not a favorable factor for the enhancement of the catalytic activity. It is concluded that the excellent photocatalytic activity of 3D-OM BiVO4 is due to the high quality 3D-OM structured BiVO4 that has a high surface area and surface oxygen vacancy density. We are sure that the 3D-OM material is a promising photocatalyst for the removal of organics from wastewater under visible light illumination.Three-dimension ordered macroporous (3D-OM) bismuth vanadates with a monoclinic crystal structure and high surface area (18-24 m2 g-1) have been prepared using ascorbic acid (AA)- or citric acid (CA)-assisted poly(methyl methacrylate) (PMMA)-templating strategy with bismuth nitrate and ammonium metavanadate as the metal sources, HNO3 as the pH adjuster and ethylene glycol and methanol as the solvent. The materials were characterized by a number of analytical techniques. The photocatalytic performance of the porous BiVO4 samples was evaluated for the degradation of phenol in the presence of a small amount of H2O2 under visible light illumination. The effects of the initial phenol concentration and the H2O2 amount on the photocatalytic activity of the photocatalyst were examined. It is shown that the chelating agent, AA or CA, and the amount in which it is added had a significant impact on the quality of the 3D-OM structure, with a ``(Bi + V) : chelating agent'' molar ratio of 2 : 1 being the most appropriate. Among the as-prepared BiVO4 samples, the one with a surface area of ca. 24 m2 g-1 showed the best visible light-driven photocatalytic performance for phenol degradation (phenol conversion = ca. 94% at phenol concentration = 0.1 mmol L-1 and in the presence of 0.6 mL H2O2). A higher phenol conversion could be achieved within the same reaction time if the phenol concentration in the aqueous solution was lowered, but an excess amount of H2O2 was not a favorable factor for the enhancement of the catalytic activity. It is concluded that the excellent photocatalytic activity of 3D-OM BiVO4 is due to the high quality 3D-OM structured BiVO4 that has a high surface area and surface oxygen vacancy density. We are sure that the 3D-OM material is a promising photocatalyst for the removal of organics from wastewater under visible light illumination. Electronic supplementary information (ESI) available. See DOI: 10.1039/c2nr12046a

Highly Integrated Quality Assurance – An Empirical Case

DOE Office of Scientific and Technical Information (OSTI.GOV)

Drake Kirkham; Amy Powell; Lucas Rich

2011-02-01

Highly Integrated Quality Assurance – An Empirical Case Drake Kirkham1, Amy Powell2, Lucas Rich3 1Quality Manager, Radioisotope Power Systems (RPS) Program, Idaho National Laboratory, P.O. Box 1625 M/S 6122, Idaho Falls, ID 83415-6122 2Quality Engineer, RPS Program, Idaho National Laboratory 3Quality Engineer, RPS Program, Idaho National Laboratory Contact: Voice: (208) 533-7550 Email: Drake.Kirkham@inl.gov Abstract. The Radioisotope Power Systems Program of the Idaho National Laboratory makes an empirical case for a highly integrated Quality Assurance function pertaining to the preparation, assembly, testing, storage and transportation of 238Pu fueled radioisotope thermoelectric generators. Case data represents multiple campaigns including the Pluto/New Horizons mission,more » the Mars Science Laboratory mission in progress, and other related projects. Traditional Quality Assurance models would attempt to reduce cost by minimizing the role of dedicated Quality Assurance personnel in favor of either functional tasking or peer-based implementations. Highly integrated Quality Assurance adds value by placing trained quality inspectors on the production floor side-by-side with nuclear facility operators to enhance team dynamics, reduce inspection wait time, and provide for immediate, independent feedback. Value is also added by maintaining dedicated Quality Engineers to provide for rapid identification and resolution of corrective action, enhanced and expedited supply chain interfaces, improved bonded storage capabilities, and technical resources for requirements management including data package development and Certificates of Inspection. A broad examination of cost-benefit indicates highly integrated Quality Assurance can reduce cost through the mitigation of risk and reducing administrative burden thereby allowing engineers to be engineers, nuclear operators to be nuclear operators, and the cross-functional team to operate more efficiently. Applicability of this case extends to any high-value, long-term project where traceability and accountability are determining factors.« less

[Health-related quality of life and conditions of health in non-institutionalised elderly people in Cali, Colombia].

PubMed

Ramírez-Vélez, Róbinson; Agredo, Ricardo A; Jerez, Alejandra M; Chapal, Liliam Y

2008-01-01

Studying the quality of life and conditions of health for non-institutionalised elderly patients. This was a cross-sectional study of elderly people aged over 65 years having no physical or psychic limitation disturbing communication between patient and doctor. The patients filled out the validated Spanish versión of the SF-12 health survey. Social-demographic and anthropometric variables were collected from clinical histories or patient interviews. Mean age was 69,2+/-6,4 (69,8-74,3 95 % Cl, p<0.05), height 1,53+/-0,08 metres (1,52-1,54 95 %,CI, p<0,05), body weight 63,8+/-11,0 kg (61,8-64,3 95 % Cl) and body mass Index (BMI) 26,7+/-4,4 kg/m 2 (26,2-27,2 95 % Cl). Waist hip Index (WHI) was 8+/-0,06 cm (83-54 95 % Cl, p<0.05) and waist circumference was 89,0+/-9,5 (104,2-106,5 95 % Cl). The highest scores were awarded regarding vitality (59+/-10,9 %), mental health (52,7+/-12,5 %) and physical health (50,1+/-7 %). The lowest score was given for emotional role (19,2+/-4 %) and social role (24,1+/-4,5 %). There has been an important deterioration in our elderly people's quality of life associated with morbidity risk factors, these being more pronounced on physical scales and slightly so on mental scales. Assessing subjective quality of life should become an every-day tool in our clinical practice.

Biosensing Using Microring Resonator Interferograms

PubMed Central

Hsu, Shih-Hsiang; Yang, Yung-Chia; Su, Yu-Hou; Wang, Sheng-Min; Huang, Shih-An; Lin, Ching-Yu

2014-01-01

Optical low-coherence interferometry (OLCI) takes advantage of the variation in refractive index in silicon-wire microring resonator (MRR) effective lengths to perform glucose biosensing using MRR interferograms. The MRR quality factor (Q), proportional to the effective length, could be improved using the silicon-wire propagation loss and coupling ratio from the MRR coupler. Our study showed that multimode interference (MMI) performed well in broad band response, but the splitting ratio drifted to 75/25 due to the stress issue. The glucose sensing sensitivity demonstrated 0.00279 meter per refractive-index-unit (RIU) with a Q factor of ∼30,000 under transverse electric polarization. The 1,310 nm DFB laser was built in the OLCI system as the optical ruler achieving 655 nm characterization accuracy. The lowest sensing limitation was therefore 2 × 10−4 RIU. Moreover, the MRR effective length from the glucose sensitivity could be utilized to experimentally demonstrate the silicon wire effective refractive index with a width of 0.45 μm and height of 0.26 μm. PMID:24434876

Effect of Staged Dissolved Oxygen Optimization on In-situ sludge Reduction and Enhanced Nutrient Removal in an A2MMBR-M System

NASA Astrophysics Data System (ADS)

Yang, Shan-Shan; Pang, Ji-Wei; Jin, Xiao-Man; Wu, Zhong-Yang; Yang, Xiao-Yin; Guo, Wan-Qian; Zhao, Zhi-Qing; Ren, Nan-Qi

2018-03-01

Redundant excess sludge production and considerable non-standard wastewater discharge from existing activated sludge processes are facing more and more challenges. The investigations on lower sludge production and higher sewage treatment efficiency are urgently needed. In this study, an anaerobic/anoxic/micro-aerobic/oxic-MBR combining a micro-aerobic starvation sludge holding tank (A2MMBR-M) system is developed. Batch tests on the optimization of the staged dissolved oxygen (DO) in the micro-aerobic, the first oxic, and the second oxic tanks were carried out by a 3-factor and 3-level Box-Behnken design (BBD). The optimal actual values of X1 , X2 , and X3 were DO1 of 0.3-0.5 mg/L, DO2 of 3.5-4.5 mg/L, and DO3 of 3-4 mg/L. After the optimization tests, continuous-flow experiments of anaerobic/anoxic/oxic (AAO) and A2MMBR-M systems were further conducted. Compared to AAO system, a 37.45% reduction in discharged excess sludge in A2MMBR-M system was achieved. The COD, TN, and TP removal efficiencies in A2MMBR-M system were respective 4.06%, 2.68%, and 4.04% higher than AAO system. The A2MMBR-M system is proved a promising wastewater treatment technology possessing enhanced in-situ sludge reduction and improved effluent quality. The staged optimized DO concentrations are the key controlling parameters for the realization of simultaneous in-situ sludge reduction and nutrient removal.

A fundamental mode Nd:GdVO4 laser pumped by a large aperture 808 nm VCSEL

NASA Astrophysics Data System (ADS)

Hao, Y. Q.; Ma, J. L.; Yan, C. L.; Liu, G. J.; Ma, X. H.; Gong, J. F.; Feng, Y.; Wei, Z. P.; Wang, Y. X.; Zhao, Y. J.

2013-05-01

A fundamental mode Nd:GdVO4 laser pumped by a vertical cavity surface emitting laser (VCSEL) is experimentally demonstrated. The VCSEL has a circular output-beam which makes it easier for it to be directly coupled to a Nd:GdVO4 microcrystal. In our research, a large aperture 808 nm VCSEL, with a multi-ring-shaped aperture (MRSA) and an almost Gaussian-shaped far-field profile, is used as the pumping source. Experimental results for the Nd:GdVO4 laser pumped by the VCSEL are presented. The maximum output peak power of 0.754 W is obtained under a pump peak power of 1.3 W, and the corresponding opto-optic conversion efficiency is 58.1%. The average slope efficiency is 65.8% from the threshold pump power of 0.2 W to the pump power of 1.3 W. The laser beam quality factors are measured to be {M}x2=1.2 0 and {M}y2=1.1 5.

TNF blockers inhibit spinal radiographic progression in ankylosing spondylitis by reducing disease activity: results from the Swiss Clinical Quality Management cohort

PubMed Central

Molnar, Christoph; Scherer, Almut; de Hooge, Manouk; Micheroli, Raphael; Exer, Pascale; Kissling, Rudolf O; Tamborrini, Giorgio; Wildi, Lukas M; Nissen, Michael J; Zufferey, Pascal; Bernhard, Jürg; Weber, Ulrich; Landewé, Robert B M; Ciurea, Adrian

2018-01-01

Objectives To analyse the impact of tumour necrosis factor inhibitors (TNFis) on spinal radiographic progression in ankylosing spondylitis (AS). Methods Patients with AS in the Swiss Clinical Quality Management cohort with up to 10 years of follow-up and radiographic assessments every 2 years were included. Radiographs were scored by two readers according to the modified Stoke Ankylosing Spondylitis Spine Score (mSASSS) with known chronology. The relationship between TNFi use before a 2-year radiographic interval and progression within the interval was investigated using binomial generalised estimating equation models with adjustment for potential confounding and multiple imputation of missing values. Ankylosing Spondylitis Disease Activity Score (ASDAS) was regarded as mediating the effect of TNFi on progression and added to the model in a sensitivity analysis. Results A total of 432 patients with AS contributed to data for 616 radiographic intervals. Radiographic progression was defined as an increase in ≥2 mSASSS units in 2 years. Mean (SD) mSASSS increase was 0.9 (2.6) units in 2 years. Prior use of TNFi reduced the odds of progression by 50% (OR 0.50, 95% CI 0.28 to 0.88) in the multivariable analysis. While no direct effect of TNFi on progression was present in an analysis including time-varying ASDAS (OR 0.61, 95% CI 0.34 to 1.08), the indirect effect, via a reduction in ASDAS, was statistically significant (OR 0.75, 95% CI 0.59 to 0.97). Conclusion TNFis are associated with a reduction of spinal radiographic progression in patients with AS. This effect seems mediated through the inhibiting effect of TNFi on disease activity. PMID:28939631

Statistical analysis of PM2.5 observations from diplomatic facilities in China

NASA Astrophysics Data System (ADS)

San Martini, Federico M.; Hasenkopf, Christa A.; Roberts, David C.

2015-06-01

Systematic monitoring of air quality are lacking in many parts of the world, especially in cities where air quality is poor. Since 2008, the U.S. Embassy in Beijing has been collecting real-time air-quality data from a monitor on the Embassy's rooftop and sharing that data publicly through social media. Using this freely available data, as well as those from four other U.S. consulates in China that are also now collecting and sharing data publicly, we demonstrate that rooftop air-quality monitors installed at embassies and consulates can further our understanding of air quality and provide a rich, hourly-averaged, long-term data source for the academic community and decision-makers. For example, this is the first study to present an analysis of diurnal variability of PM2.5 in Chengdu, Guangzhou, Shanghai, and Shenyang. We analyzed the diurnal variability of PM2.5 over the entire period of measurement for those cities and Beijing, and found marked variation across seasons and between cities. This dataset allows comparison of the PM2.5 annual average concentrations in 2013, with Guangzhou reporting 56.3 μg/m3, Shanghai 61.6 μg/m3, Chengdu 96.1 μg/m3, Beijing 99.6 μg/m3, and Shenyang 76.3 μg/m3 (note the average in Shenyang is from August 2013-July 2014). This study demonstrates the potential uses of air quality data that is currently systematically being collected and made publicly accessible by U.S. embassies and consulates in polluted but under-studied locations.

Eating quality of lamb meat: effects of breed, sex, degree of maturity and nutritional management.

PubMed

Arsenos, G; Banos, G; Fortomaris, P; Katsaounis, N; Stamataris, C; Tsaras, L; Zygoyiannis, D

2002-04-01

The eating quality of lamb meat of three indigenous Greek dairy breeds of sheep, reared under different nutritional management conditions, was assessed by Taste Panel Tests (TPT). Lean samples from the leg joints of 69 lamb carcasses of the Boutsko (B), Serres (S) and Karagouniko (K) breed were used. For the first TPT, 24 lambs (four males and four females of each breed) were reared in individual pens on a concentrate ration fed ad libitum. For the second TPT, 27 individual penned male lambs were fed on Lucerne hay ad libitum and on three different levels of concentrate: High (H), Medium, (M) and Low (L). For the third TPT, 18 male lambs were used; initially the groups were fed indoors for 63 days on three different levels of concentrate (H, M and L) together with ad libitum Lucerne hay, and subsequently finished on irrigated, sown pasture. For TPT 1, leg joints were obtained from lambs that had been slaughtered at 30, 45, 60 or 90% of mature weight (PMW) for each breed. For TPT 2, lambs were slaughtered at 23, 28 or 33 kg target slaughter live weights (TSLW), common for all breeds. For TPT 3, lambs were slaughtered at 48 or 55% of PMW for each breed. Panellists assessed warm, roasted lean samples of leg joints and rated Flavour, Juiciness, Tenderness and Overall Acceptability. In TPT 1, degree of maturity significantly affected Flavour, Tenderness and Overall Acceptability whereas sex affected only Flavour. In TPT 2, breed and concentrate level significantly affected the quality characteristics, but concentrate level had no significant effect in TPT 3. Effects associated with slaughter weight were significant for most characteristics in all TPT, with decreasing acceptability for older/heavier lambs. Significant interactions were found between breed and the other factors in TPT 2 and TPT 3 for most quality characteristics. Results from these studies suggest changing traditional production systems may enhance the eating quality of lamb meat.

Spatial and temporal characteristics of air quality and air pollutants in 2013 in Beijing.

PubMed

Yan, Shujun; Cao, Hui; Chen, Ying; Wu, Chengzhen; Hong, Tao; Fan, Hailan

2016-07-01

Air pollution has become an ever more critical issue in Beijing in more recent years. In this study, we use the air quality index (AQI), corresponding primary pollutant types and meteorological data which are collected at 16 monitoring stations in Beijing between January 2013 and December, 2013 studying the spatial and temporal variations of air quality and air pollutants. The results show that PM2.5 was the most serious pollutant, followed by O3. The average PM2.5 mass concentration was 119.5 ± 13.8 μg m(-3) in Beijing. In addition, the air quality varies across different seasons. More specifically, winter season showed the worst air quality. Moreover, while particulate matter (PM2.5 and PM10) concentrations were relatively higher in the spring and winter seasons, gaseous pollutants (O3 and NO2) were more serious in the summer and autumn. In terms of spatial heterogeneity, the findings showed that AQI and PM2.5 concentrations were higher in south and lower in the north of the city, and the O3 showed exactly a pattern with the opposite direction-higher in the north and lower in the south. NO2 was found to have a greater impact on the central region compared with that in other regions. Furthermore, PM2.5 was found to be positively correlated with the relative humidity, but negatively correlated with wind speed and atmospheric pressure (P < 0.01). However, the dominant meteorological factors that influence the PM2.5 concentrations varied in different seasons. The results in this paper provide additional information for the effective control of the air pollution in Beijing.

InGaAsP/InP-air-aperture microcavities for single-photon sources at 1.55-μm telecommunication band

NASA Astrophysics Data System (ADS)

Guo, Sijie; Zheng, Yanzhen; Weng, Zhuo; Yao, Haicheng; Ju, Yuhao; Zhang, Lei; Ren, Zhilei; Gao, Ruoyao; Wang, Zhiming M.; Song, Hai-Zhi

2016-11-01

InGaAsP/InP-air-aperture micropillar cavities are proposed to serve as 1.55-μm single photon sources, which are indispensable in silica-fiber based quantum information processing. Owing to air-apertures introduced to InP layers, and adiabatically tapered distributed Bragg-reflector structures used in the central cavity layers, the pillar diameters can be less than 1 μm, achieving mode volume as small as (λ/n)3, and the quality factors are more than 104 - 105, sufficient to increase the quantum dot emission rate for 100 times and create strong coupling between the optical mode and the 1.55- μm InAs/InP quantum dot emitter. The mode wavelengths and quality factors are found weakly changing with the cavity size and the deviation from the ideal shape, indicating the robustness against the imperfection of the fabrication technique. The fabrication, simply epitaxial growth, dry and chemical etching, is a damage-free and monolithic process, which is advantageous over previous hybrid cavities. The above properties satisfy the requirements of efficient, photonindistinguishable and coherent 1.55-μm quantum dot single photon sources, so the proposed InGaAsP/InP-air-aperture micropillar cavities are prospective candidates for quantum information devices at telecommunication band.

Prognostic value of efficiently correcting nocturnal desaturations after one month of non-invasive ventilation in amyotrophic lateral sclerosis: a retrospective monocentre observational cohort study.

PubMed

Gonzalez-Bermejo, Jésus; Morelot-Panzini, Capucine; Arnol, Nathalie; Meininger, Vincent; Kraoua, Salah; Salachas, François; Similowski, Thomas

2013-09-01

Abstract NIV adherence ('quantity' of ventilation) has a prognostic impact in amyotrophic lateral sclerosis (ALS). We hypothesized that NIV effectiveness ('quality') could also have a similar impact. NIV effectiveness was evaluated in 82 patients within the first month (M1) and every three months (symptoms, arterial blood bases, and nocturnal pulsed oxygen saturation - SpO2). Kaplan-Meier survival and risk factors for mortality one year after NIV initiation were evaluated. Forty patients were considered 'correctly ventilated' at M1 (Group 1, less than 5% of nocturnal oximetry time with an SpO2<90% - TS90) while 42 were not (Group 2). Both groups were comparable in terms of respiratory and neurological baseline characteristics. Survival was better in Group 1 (75% survival at 12 months) than in Group 2 (43% survival at 12 months, p = 0.002). In 12 Group 2 patients corrective measures were efficient in correcting TS90 at six months. In this subgroup, one-year mortality was not different from that in Group 1. Multivariate analysis identified independent mortality risk factors expectedly including bulbar involvement (HR = 4.31 (1.73 - 10.76), p = 0.002), 'rapid respiratory decline' (HR = 3.55 (1.29 - 9.75), p = 0.014) and vital capacity (HR = 0.97 (0.95 - 0.99), p = 0.010), but also inadequate ventilation in the first month (HR = 2.32 (1.09 - 4.94), p = 0.029). In conclusion, in ALS patients NIV effectiveness to correct nocturnal desaturations is an independent prognostic factor.

Nd3+-doped TeO2-PbF2-AlF3 glasses for laser applications

NASA Astrophysics Data System (ADS)

Lalla, E. A.; Rodríguez-Mendoza, U. R.; Lozano-Gorrín, A. D.; Sanz-Arranz, A.; Rull, F.; Lavín, V.

2016-01-01

A study of the optical properties of Nd3+ ion in TeO2-PbF2-AlF3 glasses has been carried out for different Nd3+ concentrations. Based on the Judd-Ofelt theory, intensity parameters and radiative properties were determined from the absorption spectra. Focusing on the suitability of this host for laser applications, the spectroscopic quality factor χ was obtained with a value of 1.07, a value of the order of other compositions proposed as laser hosts. For the most intense emission corresponding with the 4F3/2 → 4I11/2 transition (1.06 μm), the absorption and emission and have been calculated with values of 1.20 × 10-20 cm2, 2.08 × 10-20 cm2. A positive value for the gain cross-sections has been found for a population inversion factor γ of 0.4 in the spectral range from 1060 to 1110 nm. All these results suggest the potentially use of this system as a laser host.

Short communication: Microbiological quality of raw cow milk and its association with herd management practices in Northern China.

PubMed

Lan, X Y; Zhao, S G; Zheng, N; Li, S L; Zhang, Y D; Liu, H M; McKillip, J; Wang, J Q

2017-06-01

Contamination of raw milk with bacterial pathogens is potentially hazardous to human health. The aim of this study was to evaluate the total bacteria count (TBC) and presence of pathogens in raw milk in Northern China along with the associated herd management practices. A total of 160 raw milk samples were collected from 80 dairy herds in Northern China. All raw milk samples were analyzed for TBC and pathogens by culturing. The results showed that the number of raw milk samples with TBC <2 × 10 6 cfu/mL and <1 × 10 5 cfu/mL was 146 (91.25%) and 70 (43.75%), respectively. A total of 84 (52.50%) raw milk samples were Staphylococcus aureus positive, 72 (45.00%) were Escherichia coli positive, 2 (1.25%) were Salmonella positive, 2 (1.25%) were Listeria monocytogenes positive, and 3 (1.88%) were Campylobacter positive. The prevalence of S. aureus was influenced by season, herd size, milking frequency, disinfection frequency, and use of a Dairy Herd Improvement program. The TBC was influenced by season and milk frequency. The correlation between TBC and prevalence of S. aureus or E. coli is significant. The effect size statistical analysis showed that season and herd (but not Dairy Herd Improvement, herd size, milking frequency, disinfection frequency, and area) were the most important factors affecting TBC in raw milk. In conclusion, the presence of bacteria in raw milk was associated with season and herd management practices, and further comprehensive study will be powerful for effectively characterizing various factors affecting milk microbial quality in bulk tanks in China. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Optimized water vapor permeability of sodium alginate films using response surface methodology

NASA Astrophysics Data System (ADS)

Zhang, Qing; Xu, Jiachao; Gao, Xin; Fu, Xiaoting

2013-11-01

The water vapor permeability (WVP) of films is important when developing pharmaceutical applications. Films are frequently used as coatings, and as such directly influence the quality of the medicine. The optimization of processing conditions for sodium alginate films was investigated using response surface methodology. Single-factor tests and Box-Behnken experimental design were employed. WVP was selected as the response variable, and the operating parameters for the single-factor tests were sodium alginate concentration, carboxymethyl cellulose (CMC) concentration and CaCl2 solution immersion time. The coefficient of determination ( R 2) was 0.97, indicating statistical significance. A minimal WVP of 0.389 8 g·mm/(m2·h·kPa) was achieved under the optimum conditions. These were found to be a sodium alginate concentration, CMC concentration and CaCl2 solution immersion time at 8.04%, 0.13%, and 12 min, respectively. This provides a reference for potential applications in manufacturing film-coated hard capsule shells.

Counting on commitment; the quality of primary care-led diabetes management in a system with minimal incentives.

PubMed

Mc Hugh, Sheena; Marsden, Paul; Brennan, Carmel; Murphy, Katie; Croarkin, Celine; Moran, Joe; Harkins, Velma; Perry, Ivan J

2011-12-28

The aim of the present study was to assess the performance of three primary care-led initiatives providing structured care to patients with Type 2 diabetes in Ireland, a country with minimal incentives to promote the quality of care. Data, from three primary care initiatives, were available for 3010 adult patients with Type 2 diabetes. Results were benchmarked against the national guidelines for the management of Type 2 diabetes in the community and results from the National Diabetes Audit (NDA) for England (2008/2009) and the Scottish Diabetes Survey (2009). The recording of clinical processes of care was similar to results in the UK however the recording of lifestyle factors was markedly lower. Recording of HbA1c, blood pressure and lipids exceeded 85%. Recording of retinopathy screening (71%) was also comparable to England (77%) and Scotland (90%). Only 63% of patients had smoking status recorded compared to 99% in Scotland while 70% had BMI recorded compared to 89% in England. A similar proportion of patients in this initiative and the UK achieved clinical targets. Thirty-five percent of patients achieved a target HbA1c of < 6.5% (< 48 mmol/mol) compared to 25% in England. Applying the NICE target for blood pressure (≤ 140/80 mmHg), 54% of patients reached this target comparable to 60% in England. Slightly less patients were categorised as obese (> 30 kg/m²) in Ireland (50%, n = 1060) compared to Scotland (54%). This study has demonstrated what can be achieved by proactive and interested health professionals in the absence of national infrastructure to support high quality diabetes care. The quality of primary care-led diabetes management in the three initiatives studied appears broadly consistent with results from the UK with the exception of recording lifestyle factors. The challenge facing health systems is to establish quality assurance a responsibility for all health care professionals rather than the subject of special interest for a few.

Clinical characteristics and quality-of-life in patients surviving a decade of prostate cancer with bone metastases.

PubMed

Klaff, Rami; Berglund, Anders; Varenhorst, Eberhard; Hedlund, Per Olov; Jǿnler, Morten; Sandblom, Gabriel

2016-06-01

To describe characteristics and quality-of-life (QoL), and to define factors associated with long-term survival in a subgroup of patients with prostate cancer with M1b disease. The study was based on 915 patients from a prospective randomised multicentre trial (No. 5) by the Scandinavian Prostate Cancer Group, comparing parenteral oestrogen with total androgen blockade. Long-term survival was defined as patients having an overall survival of ≥10 years, and logistic regression models were constructed to identity clinical predictors of survival. QoL during follow-up was assessed using the European Organisation for Research and Treatment of Cancer Quality-of-Life Questionnaire - C30 version 1 (EORTC-C30) ratings. In all, 40 (4.4%) of the 915 men survived for >10 years. Factors significantly associated with increased likelihood of surviving for >10 years in the univariate analyses were: absence of cancer-related pain; Eastern Cooperative Oncology Group (ECOG) performance status of <2; negligible analgesic consumption; T-category of 1-2; prostate-specific antigen (PSA) level of <231 μg/L; and a Soloway score of 1. In the multivariate analyses, ECOG performance status of <2, PSA level of <231 μg/L, and Soloway score of 1, were all independent predictors of long-term survival. All subscales of the EORTC-C30 were higher in this group than for patients with short survival, but slowly declined over the decade. A subgroup of patients with prostate cancer with M1b disease and certain characteristics showed a positive long-term response to androgen-deprivation therapy with an acceptable QoL over a decade or more. Independent predictors of long-term survival were identified as ECOG performance status of <2, limited extent of bone metastases (Soloway score of 1), and a PSA level of <231 μg/L at the time of enrolment. © 2015 The Authors BJU International © 2015 BJU International Published by John Wiley & Sons Ltd.

The Effect of Repeated Electroacupuncture Analgesia on Neurotrophic and Cytokine Factors in Neuropathic Pain Rats

PubMed Central

Wang, Junying; Duanmu, Chenlin; Feng, Xiumei; Yan, Yaxia

2016-01-01

Chronic pain is a common disability influencing quality of life. Results of previous studies showed that acupuncture has a cumulative analgesic effect, but the relationship with spinal cytokines neurotrophic factors released by astrocytes remains unknown. The present study was designed to observe the effect of electroacupuncture (EA) treatment on spinal cytokines neurotrophic factors in chronic neuropathic pain rats. The chronic neuropathic pain was established by chronic constrictive injury (CCI). EA treatment was applied at Zusanli (ST36) and Yanglingquan (GB34) (both bilateral) once a day, for 30 min. IL-1β mRNA, TNF-α mRNA, and IL-1 mRNA were detected by quantitative real-time PCR, and the proteins of BDNF, NGF, and NT3/4 were detected by Western blot. The expression levels of cytokines such as IL-1β mRNA, TNF-α mRNA, IL-6 mRNA, and neurotrophic factors such as BDNF, NGF, and NT3/4 in the spinal cord were increased significantly after CCI. The astrocytes released more IL-1β and BDNF after CCI. Repeated EA treatment could suppress the elevated expression of IL-1β mRNA, TNFα mRNA, and BDNF, NGF, and NT3/4 but had no effect on IL-6 mRNA. It is suggested that cytokines and neurotrophic factors which may be closely associated with astrocytes participated in the process of EA relieving chronic pain. PMID:27800006

LD-pumped erbium and neodymium lasers with high energy and output beam quality

NASA Astrophysics Data System (ADS)

Kabanov, Vladimir V.; Bezyazychnaya, Tatiana V.; Bogdanovich, Maxim V.; Grigor'ev, Alexandr V.; Lebiadok, Yahor V.; Lepchenkov, Kirill V.; Ryabtsev, Andrew G.; Ryabtsev, Gennadii I.; Shchemelev, Maxim A.

2013-05-01

Physical and fabrication peculiarities which provide the high output energy and beam quality for the diode pumped erbium glass and Nd:YAG lasers are considered. Developed design approach allow to make passively Q-switched erbium glass eye-safe portable laser sources with output energy 8 - 12 mJ (output pulse duration is less than 25 ns, pulse repetition rate up to 5 Hz) and beam quality M2 less than 1.3. To reach these values the erbium laser pump unit parameters were optimized also. Namely, for the powerful laser diode arrays the optimal near-field fill-factor, output mirror reflectivity and heterostructure properties were determined. Construction of advanced diode and solid-state lasers as well as the optical properties of the active element and the pump unit make possible the lasing within a rather wide temperature interval (e.g. from minus forty till plus sixty Celsius degree) without application of water-based chillers. The transversally pumped Nd:YAG laser output beam uniformity was investigated depending on the active element (AE) pump conditions. In particular, to enhance the pump uniformity within AE volume, a special layer which practically doesn't absorb the pump radiation but effectively scatters the pump and lasing beams, was used. Application of such layer results in amplified spontaneous emission suppression and improvement of the laser output beam uniformity. The carried out investigations allow us to fabricate the solid-state Nd:YAG lasers (1064 nm) with the output energy up to 420 mJ at the pulse repetition rate up to 30 Hz and the output energy up to 100 mJ at the pulse repetition rate of of 100 Hz. Also the laser sources with following characteristics: 35 mJ, 30 Hz (266 nm); 60 mJ, 30 Hz (355 nm); 100 mJ, 30 Hz (532 nm) were manufactured on the base of the developed Nd:YAG quantrons.

Assessing Leader Cognitive Skills with Situational Judgment Tests: Construct Validity Results

DTIC Science & Technology

2010-09-01

M2A1, M2A3 , M2A4a, M2A4b, M2A4e, M2A4k .54** Factor 5 (5 items): Mission Statement M3Ba, M3Bb, M3Bc, M3Bd, M3Be .33** Factor 6 (11 items): Mission...Organization. Team A 2/A/4-99 AR ( M2A3 ) 3/A/4-99 AR ( M2A3 ) 1/C/4-99 AR (M1A2 SEP) TF Control Scout Platoon Mortar Platoon 1/A/2-244 CHEM...SMK) (DS) B/1st BSB (OPCON) Maintenance Platoon Team B 2/B/4-99 AR ( M2A3 ) 3/B/4-99 AR ( M2A3 ) 1/DC/4-99 AR (M1A2 SEP) Team C 1

[Factors affecting biological removal of iron and manganese in groundwater].

PubMed

Xue, Gang; He, Sheng-Bing; Wang, Xin-Ze

2006-01-01

Factors affecting biological process for removing iron and manganese in groundwater were analyzed. When DO and pH in groundwater after aeration were 7.0 - 7.5 mg/L and 6.8 - 7.0 respectively, not only can the activation of Mn2+ oxidizing bacteria be maintained, but also the demand of iron and manganese removal can be satisfied. A novel inoculating approach of grafting mature filter material into filter bed, which is easier to handle than selective culture media, was employed in this research. However, this approach was only suitable to the filter material of high-quality manganese sand with strong Mn2+ adsorption capacity. For the filter material of quartz sand with weak adsorption capacity, only culturing and domesticating Mn2+ oxidizing bacteria by selective culture media can be adopted as inoculation in filter bed. The optimal backwashing rate of biological filter bed filled with manganese sand and quartz sand should be kept at a relatively low level of 6 - 9 L/(m2 x s) and 7 -11 L/( m2 x s), respectively. Then the stability of microbial phase in filter bed was not disturbed, and iron and manganese removal efficiency recovered in less than 5h. Moreover, by using filter material with uniform particle size of 1.0 - 1.2 mm in filter bed, the filtration cycle reached as long as 35 - 38h.

The Effect of Viscous Air Damping on an Optically Actuated Multilayer MoS2 Nanomechanical Resonator Using Fabry-Perot Interference

PubMed Central

She, Yumei; Li, Cheng; Lan, Tian; Peng, Xiaobin; Liu, Qianwen; Fan, Shangchun

2016-01-01

We demonstrated a multilayer molybdenum disulfide (MoS2) nanomechanical resonator by using optical Fabry-Perot (F-P) interferometric excitation and detection. The thin circular MoS2 nanomembrane with an approximate 8-nm thickness was transferred onto the endface of a ferrule with an inner diameter of 125 μm, which created a low finesse F-P interferometer with a cavity length of 39.92 μm. The effects of temperature and viscous air damping on resonance behavior of the resonator were investigated in the range of −10–80 °C. Along with the optomechanical behavior of the resonator in air, the measured resonance frequencies ranged from 36 kHz to 73 kHz with an extremely low inflection point at 20 °C, which conformed reasonably to those solved by previously obtained thermal expansion coefficients of MoS2. Further, a maximum quality (Q) factor of 1.35 for the resonator was observed at 0 °C due to viscous dissipation, in relation to the lower Knudsen number of 0.0025~0.0034 in the tested temperature range. Moreover, measurements of Q factor revealed little dependence of Q on resonance frequency and temperature. These measurements shed light on the mechanisms behind viscous air damping in MoS2, graphene, and other 2D resonators. PMID:28335290

Gln3p and Nil1p regulation of invertase activity and SUC2 expression in Saccharomyces cerevisiae.

PubMed

Oliveira, Edna Maria Morais; Mansure, José João; Bon, Elba Pinto da Silva

2005-04-01

In Saccharomyces cerevisiae, sensing and signalling pathways regulate gene expression in response to quality of carbon and nitrogen sources. One such system, the target of rapamycin (Tor) proteins, senses nutrients and uses the GATA activators Gln3p and Nil1p to regulate translation in response to low-quality carbon and nitrogen. The signal transduction, triggered in response to nitrogen nutrition that is sensed by the Tor proteins, operates via a regulatory pathway involving the cytoplasmic factor Ure2p. When carbon and nitrogen are abundant, the phosphorylated Ure2p anchors the also phosphorylated Gln3p and Nil1p in the cytoplasm. Upon a shift from high- to low-quality nitrogen or treatment with rapamycin all three proteins are dephosphorylated, causing Gln3p and Nil1p to enter the nucleus and promote transcription. The genes that code for yeast periplasmic enzymes with nutritional roles would be obvious targets for regulation by the sensing and signalling pathways that respond to quality of carbon and nitrogen sources. Indeed, previous results from our laboratory had shown that the GATA factors Gln3p, Nil1p, Dal80p, Nil2p and also the protein Ure2 regulate the expression of asparaginase II, coded by ASP3. We also had observed that the activity levels of the also periplasmic invertase, coded by SUC2, were 6-fold lower in ure2 mutant cells in comparison to wild-type cells collected at stationary phase. These results suggested similarities between the signalling pathways regulating the expression of ASP3 and SUC2. In the present work we showed that invertase levels displayed by the single nil1 and gln3 and by the double gln3nil1 mutant cells, cultivated in a sucrose-ammonium medium and collected at the exponential phase, were 6-, 10- and 60-fold higher, respectively, in comparison to their wild-type counterparts. RT-PCR data of SUC2 expression in the double-mutant cells indicated a 10-fold increase in the mRNA(SUC2) levels.

Diurnal cycles control the fate of contaminants at an Andean river confluence impacted by legacy mining

NASA Astrophysics Data System (ADS)

Pasten, P.; Guerra, P. A.; Simonson, K.; Bonilla, C.; Pizarro, G. E.; Escauriaza, C. R.; González, C.

2014-12-01

The importance of hydrologic-geochemical interactions in arid environments is a controlling factor in quality and quantity of water available for human consumption and agriculture. When acid drainage affects these watersheds, water quality is gravely degraded. Despite its effect on watersheds, the relationship between time changes in hydrological variables and water quality in arid regions has not been studied thoroughly. Temporal variations in acid drainage can control when the transport of toxic elements is increased. We performed field work at the Azufre River (pH 2, E.C~10.9 mS/cm) and Caracarani River (pH 8.7, E.C~1.2 mS/cm) confluence, located in the Northern Chilean Altiplano (at 4000 m asl). We registered stream flowrates (total flowrate~430 L/s), temperature and electric conductivity (E.C) hourly using in-stream data loggers during one year. We also measured turbidity and pH during one field survey at different distances from the junction, as a proxy of the formation of iron-aluminum particles that cycle trace elements in these environments. We found turbidity-pH diurnal cycles were caused by upstream hourly changes in upstream flowrate: when the Caracarani River flowrate reached its daily peak, particle formation occurred, while the dissolution of particles occurred when the Azufre River reached its maximum value. This last process occurred due to upstream freeze-thaw cycles. This study shows how the dynamics of natural confluences determines chemical transport. The formation of particles enriched in toxic elements can promote settling as a natural attenuation process, while their dissolution will produce their release and transport long distances downstream. It is important to consider time as an important variable in water quality monitoring and in water management infrastructure where pulses of contamination can have potentially negative effects in its use. Acknowledgements: Funding was provided by "Proyecto Fondecyt 1130936" and "CONICYT/FONDAP 15110020".

Microbial quality of agricultural water in Central Florida

PubMed Central

Topalcengiz, Zeynal; Strawn, Laura K.

2017-01-01

The microbial quality of water that comes into the edible portion of produce is believed to directly relate to the safety of produce, and metrics describing indicator organisms are commonly used to ensure safety. The US FDA Produce Safety Rule (PSR) sets very specific microbiological water quality metrics for agricultural water that contacts the harvestable portion of produce. Validation of these metrics for agricultural water is essential for produce safety. Water samples (500 mL) from six agricultural ponds were collected during the 2012/2013 and 2013/2014 growing seasons (46 and 44 samples respectively, 540 from all ponds). Microbial indicator populations (total coliforms, generic Escherichia coli, and enterococci) were enumerated, environmental variables (temperature, pH, conductivity, redox potential, and turbidity) measured, and pathogen presence evaluated by PCR. Salmonella isolates were serotyped and analyzed by pulsed-field gel electrophoresis. Following rain events, coliforms increased up to 4.2 log MPN/100 mL. Populations of coliforms and enterococci ranged from 2 to 8 and 1 to 5 log MPN/100 mL, respectively. Microbial indicators did not correlate with environmental variables, except pH (P<0.0001). The invA gene (Salmonella) was detected in 26/540 (4.8%) samples, in all ponds and growing seasons, and 14 serotypes detected. Six STEC genes were detected in samples: hly (83.3%), fliC (51.8%), eaeA (17.4%), rfbE (17.4%), stx-I (32.6%), stx-II (9.4%). While all ponds met the PSR requirements, at least one virulence gene from Salmonella (invA-4.8%) or STEC (stx-I-32.6%, stx-II-9.4%) was detected in each pond. Water quality for tested agricultural ponds, below recommended standards, did not guarantee the absence of pathogens. Investigating the relationships among physicochemical attributes, environmental factors, indicator microorganisms, and pathogen presence allows researchers to have a greater understanding of contamination risks from agricultural surface waters in the field. PMID:28399144

Microbial quality of agricultural water in Central Florida.

PubMed

Topalcengiz, Zeynal; Strawn, Laura K; Danyluk, Michelle D

2017-01-01

The microbial quality of water that comes into the edible portion of produce is believed to directly relate to the safety of produce, and metrics describing indicator organisms are commonly used to ensure safety. The US FDA Produce Safety Rule (PSR) sets very specific microbiological water quality metrics for agricultural water that contacts the harvestable portion of produce. Validation of these metrics for agricultural water is essential for produce safety. Water samples (500 mL) from six agricultural ponds were collected during the 2012/2013 and 2013/2014 growing seasons (46 and 44 samples respectively, 540 from all ponds). Microbial indicator populations (total coliforms, generic Escherichia coli, and enterococci) were enumerated, environmental variables (temperature, pH, conductivity, redox potential, and turbidity) measured, and pathogen presence evaluated by PCR. Salmonella isolates were serotyped and analyzed by pulsed-field gel electrophoresis. Following rain events, coliforms increased up to 4.2 log MPN/100 mL. Populations of coliforms and enterococci ranged from 2 to 8 and 1 to 5 log MPN/100 mL, respectively. Microbial indicators did not correlate with environmental variables, except pH (P<0.0001). The invA gene (Salmonella) was detected in 26/540 (4.8%) samples, in all ponds and growing seasons, and 14 serotypes detected. Six STEC genes were detected in samples: hly (83.3%), fliC (51.8%), eaeA (17.4%), rfbE (17.4%), stx-I (32.6%), stx-II (9.4%). While all ponds met the PSR requirements, at least one virulence gene from Salmonella (invA-4.8%) or STEC (stx-I-32.6%, stx-II-9.4%) was detected in each pond. Water quality for tested agricultural ponds, below recommended standards, did not guarantee the absence of pathogens. Investigating the relationships among physicochemical attributes, environmental factors, indicator microorganisms, and pathogen presence allows researchers to have a greater understanding of contamination risks from agricultural surface waters in the field.

Registration of interferometric SAR images

NASA Technical Reports Server (NTRS)

Lin, Qian; Vesecky, John F.; Zebker, Howard A.

1992-01-01

Interferometric synthetic aperture radar (INSAR) is a new way of performing topography mapping. Among the factors critical to mapping accuracy is the registration of the complex SAR images from repeated orbits. A new algorithm for registering interferometric SAR images is presented. A new figure of merit, the average fluctuation function of the phase difference image, is proposed to evaluate the fringe pattern quality. The process of adjusting the registration parameters according to the fringe pattern quality is optimized through a downhill simplex minimization algorithm. The results of applying the proposed algorithm to register two pairs of Seasat SAR images with a short baseline (75 m) and a long baseline (500 m) are shown. It is found that the average fluctuation function is a very stable measure of fringe pattern quality allowing very accurate registration.

Factors That Matter to Low-Income and Racial/Ethnic Minority Mothers When Choosing a Pediatric Practice: a Mixed Methods Analysis.

PubMed

Goff, Sarah L; Mazor, Kathleen M; Guhn-Knight, Haley; Budway, Yara Youssef; Murphy, Lorna; White, Katharine O; Lagu, Tara; Pekow, Penelope S; Priya, Aruna; Lindenauer, Peter K

2017-12-01

Pediatric practices' scores on healthcare quality measures are increasingly available to the public. However, patients from low-income and racial/ethnic minority populations rarely use these data. We sought to understand potential barriers to using quality data by assessing what factors mattered to women when choosing a pediatric practice. As part of a randomized trial to overcome barriers to using quality data, we recruited women from a prenatal clinic serving an underserved population. Women reported how much 12 factors mattered when they chose a pediatric practice (5-point Likert scale), what other factors mattered to them, and which factors mattered the most. We assessed whether factor importance varied with selected participant characteristics and qualitatively analyzed the "other" factors named. Participants' (n = 367) median age was 23 years, and they were largely Hispanic (60.4%), white (21.2%), or black (16.9%). Insurance acceptance "mattered a lot" to the highest percentage of women (93.2%), while online information about what other parents think of a practice "mattered a lot" to the fewest (7.4%). Major themes from our qualitative analysis of "other" factors that mattered included physicians' interpersonal skills and pediatrician-specific traits. Factors related to access "mattered the most" to the majority of women. Pediatrician characteristics and factors related to access to care may be more important to low-income and racial/ethnic minority women than more commonly reported quality metrics. Aligning both the content and delivery of publicly reported quality data with women's interests may increase use of pediatric quality data. Clinicaltrials.gov NCT01784575.

Beam quality improvement by population-dynamic-coupled combined guiding effect in end-pumped Nd:YVO4 laser oscillator

NASA Astrophysics Data System (ADS)

Shen, Yijie; Gong, Mali; Fu, Xing

2018-05-01

Beam quality improvement with pump power increasing in an end-pumped laser oscillator is experimentally realized for the first time, to the best of our knowledge. The phenomenon is caused by the population-dynamic-coupled combined guiding effect, a comprehensive theoretical model of which has been well established, in agreement with the experimental results. Based on an 888 nm in-band dual-end-pumped oscillator using four tandem Nd:YVO4 crystals, the output beam quality of M^2= 1.1/1.1 at the pump power of 25 W is degraded to M^2 = 2.5/1.8 at 75 W pumping and then improved to M^2= 1.8/1.3 at 150 W pumping. The near-TEM_{00} mode is obtained with the highest continuous-wave output power of 72.1 W and the optical-to-optical efficiency of 48.1%. This work demonstrates great potential to further scale the output power of end-pumped laser oscillator while keeping good beam quality.

Multi-GNSS signal-in-space range error assessment - Methodology and results

NASA Astrophysics Data System (ADS)

Montenbruck, Oliver; Steigenberger, Peter; Hauschild, André

2018-06-01

The positioning accuracy of global and regional navigation satellite systems (GNSS/RNSS) depends on a variety of influence factors. For constellation-specific performance analyses it has become common practice to separate a geometry-related quality factor (the dilution of precision, DOP) from the measurement and modeling errors of the individual ranging measurements (known as user equivalent range error, UERE). The latter is further divided into user equipment errors and contributions related to the space and control segment. The present study reviews the fundamental concepts and underlying assumptions of signal-in-space range error (SISRE) analyses and presents a harmonized framework for multi-GNSS performance monitoring based on the comparison of broadcast and precise ephemerides. The implications of inconsistent geometric reference points, non-common time systems, and signal-specific range biases are analyzed, and strategies for coping with these issues in the definition and computation of SIS range errors are developed. The presented concepts are, furthermore, applied to current navigation satellite systems, and representative results are presented along with a discussion of constellation-specific problems in their determination. Based on data for the January to December 2017 time frame, representative global average root-mean-square (RMS) SISRE values of 0.2 m, 0.6 m, 1 m, and 2 m are obtained for Galileo, GPS, BeiDou-2, and GLONASS, respectively. Roughly two times larger values apply for the corresponding 95th-percentile values. Overall, the study contributes to a better understanding and harmonization of multi-GNSS SISRE analyses and their use as key performance indicators for the various constellations.

Assessment of Reference Height Models on Quality of Tandem-X dem

NASA Astrophysics Data System (ADS)

Mirzaee, S.; Motagh, M.; Arefi, H.

2015-12-01

The aim of this study is to investigate the effect of various Global Digital Elevation Models (GDEMs) in producing high-resolution topography model using TanDEM-X (TDX) Coregistered Single Look Slant Range Complex (CoSSC) images. We selected an image acquired on Jun 12th, 2012 over Doroud region in Lorestan, west of Iran and used 4 external digital elevation models in our processing including DLR/ASI X-SAR DEM (SRTM-X, 30m resolution), ASTER GDEM Version 2 (ASTER-GDEMV2, 30m resolution), NASA SRTM Version 4 (SRTM-V4, 90m resolution), and a local photogrammetry-based DEM prepared by National Cartographic Center (NCC DEM, 10m resolution) of Iran. InSAR procedure for DEM generation was repeated four times with each of the four external height references. The quality of each external DEM was initially assessed using ICESat filtered points. Then, the quality of, each TDX-based DEM was assessed using the more precise external DEM selected in the previous step. Results showed that both local (NCC) DEM and SRTM X-band performed the best (RMSE< 9m) for TDX-DEM generation. In contrast, ASTER GDEM v2 and SRTM C-band v4 showed poorer quality.

Variability of levels and composition of PM10 and PM2.5 in the Barcelona metro system

NASA Astrophysics Data System (ADS)

Querol, X.; Moreno, T.; Karanasiou, A.; Reche, C.; Alastuey, A.; Viana, M.; Font, O.; Gil, J.; de Miguel, E.; Capdevila, M.

2012-06-01

From an environmental perspective, the underground metro system is one of the cleanest forms of public transportation in urban agglomerations. Current studies report contradicting results regarding air quality in the metro systems: whereas some reveal poor air quality, others report PM levels which are lower or of the same order of magnitude than those measured in traffic sites above ground level. The present work assesses summer and winter indoor air quality and passenger exposure in the Barcelona metro, focusing on PM levels and their metal contents. In addition, the impact on indoor air quality of platform screen door systems (automated systems consisting of closed rail track and platforms) is evaluated, to determine whether these systems reduce passenger exposure to PM when compared with conventional systems (open tracks and platforms). In the Barcelona metro PM levels inside the trains in summer are amongst the lowest reported for worldwide metro systems (11-32 μg m-3 PM2.5). This is most likely due to the air conditioning system working in all carriages of the Barcelona metro during the whole year. Levels were considerably higher on the platforms, reaching mean levels of 46 and 125 μg m3 in the new (L9) and old (L3) lines, respectively. PM10 data are also reported in the present study, but comparison with other metro systems is difficult due to the scarcity of data compared with PM2.5. Results showed distinct PM daily cycles, with a drastic increase from 06:00 to 07:00 a.m., a diurnal maximum from 07:00 to 10:00 p.m., and marked decrease between 10:00 p.m. and 05:00 a.m. The elements with the highest enrichment were those associated with wheel or brake abrasion products (Ba, Fe, Cu, Mn, Cr, Sb, As, Mo, Co, Sr, among others). Laminar hematite (Fe2O3) was the dominant particle type, being mainly originated by mechanical abrasion of the rail track and wheels. Regarding passenger exposure to PM, the contribution of commuting by metro was estimated to account for around 10% of the daily exposure. However, this contribution may be one order of magnitude higher when specific matals are considered. Finally, we conclude that the implementation of platform screen door systems results in reductions of both PM levels and metal concentrations. In addition an advanced optimized ventilation system gave even a much higher efficiency in reducing exposure to PM of metro commuters. Combining these two features PM exposure levels in the platforms may be reduced down by a factor of 7 with respect the old subway lines in Barcelona.

Enteric coating of soft gelatin capsules by spouted bed: effect of operating conditions on coating efficiency and on product quality.

PubMed

Pissinati, Rafael; Oliveira, Wanderley Pereira

2003-05-01

The present study was conducted in order to analyze the viability of the spouted bed process for application of a gastric-resistant coating to soft gelatin capsules. The variables investigated were: included angle of conical base, (gamma), the relation between the feed mass flow rate of the coating suspension and the feed mass flow rate of spouting gas (W(s)/W(g)); the ratio between the flow rate of the spouting gas and the flow rate at minimum spouting condition (Q/Q(ms)); the mass of capsules in the bed (M(0)), and the capsule's size. The product quality was measured by disintegration tests, traction x deformation tests, image analysis and by the evaluation of the coating mass distribution and shape factor variation during the coating operation. The experiments were performed in a spouted bed with a column diameter of 200 mm and included a conical base angle of 40 degrees. The best coating efficiency values were obtained for M(0)=300 g. Coating efficiency tended to increase with increasing W(s)/W(g) ratio. Disintegration tests showed that the gastric-resistant effect was obtained with a coating mass of 3.86 mg/cm(2). The shape factor increase during the coating operation. The capsule's coating mass distribution tended to maintain the original distribution.

Potential impact of a US climate policy and air quality regulations on future air quality and climate change

NASA Astrophysics Data System (ADS)

Lee, Yunha; Shindell, Drew T.; Faluvegi, Greg; Pinder, Rob W.

2016-04-01

We have investigated how future air quality and climate change are influenced by the US air quality regulations that existed or were proposed in 2013 and a hypothetical climate mitigation policy that aims to reduce 2050 CO2 emissions to be 50 % below 2005 emissions. Using the NASA GISS ModelE2 general circulation model, we look at the impacts for year 2030 and 2055. The US energy-sector emissions are from the GLIMPSE project (GEOS-Chem LIDORT Integrated with MARKAL (MARKet ALlocation) for the Purpose of Scenario Exploration), and other US emissions data sets and the rest of the world emissions data sets are based on the RCP4.5 scenario. The US air quality regulations are projected to have a strong beneficial impact on US air quality and public health in year 2030 and 2055 but result in positive radiative forcing. Under this scenario, no more emission constraints are added after 2020, and the impacts on air quality and climate change are similar between year 2030 and 2055. Surface particulate matter with a diameter smaller than 2.5 µm (PM2.5) is reduced by ˜ 2 µg m-3 on average over the USA, and surface ozone by ˜ 8 ppbv. The improved air quality prevents about 91 400 premature deaths in the USA, mainly due to the PM2.5 reduction (˜ 74 200 lives saved). The air quality regulations reduce the light-reflecting aerosols (i.e., sulfate and organic matter) more than the light-absorbing species (i.e., black carbon and ozone), leading to a strong positive radiative forcing (RF) over the USA by both aerosols' direct and indirect forcing: the total RF is ˜ 0.04 W m-2 over the globe, and ˜ 0.8 W m-2 over the USA. Under the hypothetical climate policy, a future CO2 emissions cut is achieved in part by relying less on coal, and thus SO2 emissions are noticeably reduced. This provides air quality co-benefits, but it could lead to potential climate disbenefits over the USA. In 2055, the US mean total RF is +0.22 W m-2 due to positive aerosol direct and indirect forcing, while the global mean total RF is -0.06 W m-2 due to the dominant negative CO2 RF (instantaneous RF). To achieve a regional-scale climate benefit via a climate policy, it is critical (1) to have multinational efforts to reduce greenhouse gas (GHG) emissions and (2) to simultaneously target emission reduction of light-absorbing species (e.g., BC and O3) on top of long-lived species. The latter is very desirable as the resulting climate benefit occurs faster and provides co-benefits to air quality and public health.

Potential Impact of a US Climate Policy and Air Quality Regulations on Future Air Quality and Climate Change

NASA Technical Reports Server (NTRS)

Lee, Y. H.; Faluvegi, Gregory S.

2016-01-01

We have investigated how future air quality and climate change are influenced by the US air quality regulations that existed or were proposed in 2013 and a hypothetical climate mitigation policy that aims to reduce 2050 CO2 emissions to be 50% below 2005 emissions. Using the NASA GISS ModelE2 general circulation model, we look at the impacts for year 2030 and 2055. The US energy-sector emissions are from the GLIMPSE project (GEOS-Chem LIDORT Integrated with MARKAL (MARKet ALlocation) for the Purpose of Scenario Exploration), and other US emissions data sets and the rest of the world emissions data sets are based on the RCP4.5 scenario. The US air quality regulations are projected to have a strong beneficial impact on US air quality and public health in year 2030 and 2055 but result in positive radiative forcing. Under this scenario, no more emission constraints are added after 2020, and the impacts on air quality and climate change are similar between year 2030 and 2055. Surface particulate matter with a diameter smaller than 2.5 micron PM(sub 2:5) is reduced by 2 approximately µg/m(sup -3) on average over the USA, and surface ozone by approximately 8 ppbv. The improved air quality prevents about 91 400 premature deaths in the USA, mainly due to the PM(sub 2:5) reduction approximately (74 200 lives saved). The air quality regulations reduce the light-reflecting aerosols (i.e., sulfate and organic matter) more than the light-absorbing species (i.e., black carbon and ozone), leading to a strong positive radiative forcing (RF) over the USA by both aerosols' direct and indirect forcing: the total RF is approximately 0.04 W m(sup -2) over the globe, and approximately 0.8 W m(sup -2) over the USA. Under the hypothetical climate policy, a future CO2 emissions cut is achieved in part by relying less on coal, and thus SO2 emissions are noticeably reduced. This provides air quality co-benefits, but it could lead to potential climate disbenefits over the USA. In 2055, the US mean total RF is +C02 W m(sup -2) due to positive aerosol direct and indirect forcing, while the global mean total RF is -0.06 W m(sup -2) due to the dominant negative CO2 RF (instantaneous RF). To achieve a regional-scale climate benefit via a climate policy, it is critical (1) to have multinational efforts to reduce greenhouse gas (GHG) emissions and (2) to simultaneously target emission reduction of light-absorbing species (e.g., BC and O3) on top of long-lived species. The latter is very desirable as the resulting climate benefit occurs faster and provides cobenefits to air quality and public health.

Hepatocyte Growth Factor Inhibits Apoptosis by the Profibrotic Factor Angiotensin II via Extracellular Signal-regulated Kinase 1/2 in Endothelial Cells and Tissue Explants

DTIC Science & Technology

2010-12-01

were subjected to SDS- polyacryl - amide gel electrophoresis and electroblotted onto nitrocellulose membrane. Membranes were blocked with 5% bovine...1 mM sodium fluoride, 0.1 mM sodium orthovanadate, 1 mM tetrasodium pyrophosphate, 2 mM phenylmethylsulfonyl fluoride, 10 g/ml leupeptin, and 10 g...buffer [50 mM Tris-HCl, 1 mM EGTA, 1% (wt/vol) CHAPS, 10% glycerol, 50 mM sodium fluoride, 1 mM sodium orthovanadate, 2 mM phenylmethylsulfonyl fluoride

Response of consumer and research grade indoor air quality monitors to residential sources of fine particles.

PubMed

Singer, B C; Delp, W W

2018-04-23

The ability to inexpensively monitor PM 2.5 to identify sources and enable controls would advance residential indoor air quality (IAQ) management. Consumer IAQ monitors incorporating low-cost optical particle sensors and connections with smart home platforms could provide this service if they reliably detect PM 2.5 in homes. In this study, particles from typical residential sources were generated in a 120 m 3 laboratory and time-concentration profiles were measured with 7 consumer monitors (2-3 units each), 2 research monitors (Thermo pDR-1500, MetOne BT-645), a Grimm Mini Wide-Range Aerosol Spectrometer (GRM), and a Tapered Element Oscillating Microbalance with Filter Dynamic Measurement System (FDMS), a Federal Equivalent Method for PM 2.5 . Sources included recreational combustion (candles, cigarettes, incense), cooking activities, an unfiltered ultrasonic humidifier, and dust. FDMS measurements, filter samples, and known densities were used to adjust the GRM to obtain time-resolved mass concentrations. Data from the research monitors and 4 of the consumer monitors-AirBeam, AirVisual, Foobot, Purple Air-were time correlated and within a factor of 2 of the estimated mass concentrations for most sources. All 7 of the consumer and both research monitors substantially under-reported or missed events for which the emitted mass was comprised of particles smaller than 0.3 μm diameter. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Exposure of children to air pollution in the industrial zone of Metropolitan Area of Mexico City

NASA Astrophysics Data System (ADS)

Mugica-Alvarez, Violeta; Quintanilla-Vega, Betsabé; De Vizcaya-Ruiz, Andrea; Alvarado-Cruz, Isabel

2016-04-01

An air quality monitoring in three schools located in the most important industrial zone at the Northeast of the Metropolitan Area of Mexico City (MAMC) was conducted in order to determine the exposure of children to toxics contained in PM10. Particles were analyzed for metals, polycyclic aromatic hydrocarbons (PAH), organic and elemental carbon by ICP-AES, GC-MS and TOT (Sunset lab) respectively. Average concentration of PM10 was 108.4±11.6 μg/m3. Most abundant metals were Fe, Zn and Pb with concentrations ranged by 1.1-5.4 μg/m3, 0.3-2 μg/m3, and 0.18-0.63 μg/m3 respectively; the sum of the seventeen PAHs varied from 1.4 to 3.3 ng/m3 where most abundant PAH were indene[1,2,3-c,d]pyrene, benzo[b]fluoranthene, benzo[a]anthracene, chrysene, and benzo[a]pyrene. The sum of the seven carcinogenic PAH contributed in average with the 48% of the total mixture. Carcinogenic potential of PAH were obtained using toxic equivalent factors determined by Nisbet and La Goy which varied from 0.3 to 0.6 ng/ m3 of benzo[a]pyrene equivalent (BAPeq), this value is lower than the standard proposed for the European Community of 1 ng/ m3, but higher than the standard from the United Kingdom of 0.25 ng/ m3. Principal component analysis for source apportionment showed that vehicular and industrial emissions are the main sources of PM in the zone. In general, the concentrations of particles as well as concentration of metals and PAHs are lower than concentrations measured six year before, showing that the established measures have improved the air quality. Nevertheless these PM10 concentrations exceeded frequently the Mexican Standard and children are especially susceptible due to the higher risk to develop diseases if the exposure occurs at early age.

[Cleaning and disinfection of surfaces in hospitals: Data on structure, process and result in the Frankfurt/Main Metropolitan Area].

PubMed

Hausemann, A; Hofmann, H; Otto, U; Heudorf, Ursel

2015-06-01

In addition to hand hygiene and reprocessing of medical products, cleaning and disinfection of surfaces is also an important issue in the prevention of germ transmission and by implication infections. Therefore, in 2014, the quality of the structure, process and result of surface preparation of all hospitals in Frankfurt am Main, Germany, was monitored. All 17 hospitals transferred information on the quality of structure. Process quality was obtained through direct observation during cleaning and disinfection of rooms and their plumbing units. Result quality was gained using the fluorescent method, i.e. marking surfaces with a fluorescent liquid and testing if this mark has been sufficiently removed by cleaning. Structure quality: in all hospitals the employees were trained regularly. In 12 of them, the foremen had the required qualifications, in 6 hospitals unclarity as to the intersection of the cleaning and care services remained. In 14 hospitals only visible contamination was cleaned on the weekends, whereas complete cleaning was reported to take place in 12 hospitals on Saturdays and in 2 hospitals on Sundays. The contractually stipulated cleaning (observations specified in brackets) averaged 178 m(2)/h (148 m(2)/h) per patient room and 69 m(2)/h (33 m(2)/h) for bathrooms. Process quality: during process monitoring, various hand contact surfaces were prepared insufficiently. Result quality: 63 % of fluorescent markings were appropriately removed. The need for improvement is given especially in the area of the qualification of the foremen and a in a clear definition of the intersection between cleaning and care services, as well as in the regulations for weekends and public holidays.

Identifying Items to Assess Methodological Quality in Physical Therapy Trials: A Factor Analysis

PubMed Central

Cummings, Greta G.; Fuentes, Jorge; Saltaji, Humam; Ha, Christine; Chisholm, Annabritt; Pasichnyk, Dion; Rogers, Todd

2014-01-01

Background Numerous tools and individual items have been proposed to assess the methodological quality of randomized controlled trials (RCTs). The frequency of use of these items varies according to health area, which suggests a lack of agreement regarding their relevance to trial quality or risk of bias. Objective The objectives of this study were: (1) to identify the underlying component structure of items and (2) to determine relevant items to evaluate the quality and risk of bias of trials in physical therapy by using an exploratory factor analysis (EFA). Design A methodological research design was used, and an EFA was performed. Methods Randomized controlled trials used for this study were randomly selected from searches of the Cochrane Database of Systematic Reviews. Two reviewers used 45 items gathered from 7 different quality tools to assess the methodological quality of the RCTs. An exploratory factor analysis was conducted using the principal axis factoring (PAF) method followed by varimax rotation. Results Principal axis factoring identified 34 items loaded on 9 common factors: (1) selection bias; (2) performance and detection bias; (3) eligibility, intervention details, and description of outcome measures; (4) psychometric properties of the main outcome; (5) contamination and adherence to treatment; (6) attrition bias; (7) data analysis; (8) sample size; and (9) control and placebo adequacy. Limitation Because of the exploratory nature of the results, a confirmatory factor analysis is needed to validate this model. Conclusions To the authors' knowledge, this is the first factor analysis to explore the underlying component items used to evaluate the methodological quality or risk of bias of RCTs in physical therapy. The items and factors represent a starting point for evaluating the methodological quality and risk of bias in physical therapy trials. Empirical evidence of the association among these items with treatment effects and a confirmatory factor analysis of these results are needed to validate these items. PMID:24786942

Identifying items to assess methodological quality in physical therapy trials: a factor analysis.

PubMed

Armijo-Olivo, Susan; Cummings, Greta G; Fuentes, Jorge; Saltaji, Humam; Ha, Christine; Chisholm, Annabritt; Pasichnyk, Dion; Rogers, Todd

2014-09-01

Numerous tools and individual items have been proposed to assess the methodological quality of randomized controlled trials (RCTs). The frequency of use of these items varies according to health area, which suggests a lack of agreement regarding their relevance to trial quality or risk of bias. The objectives of this study were: (1) to identify the underlying component structure of items and (2) to determine relevant items to evaluate the quality and risk of bias of trials in physical therapy by using an exploratory factor analysis (EFA). A methodological research design was used, and an EFA was performed. Randomized controlled trials used for this study were randomly selected from searches of the Cochrane Database of Systematic Reviews. Two reviewers used 45 items gathered from 7 different quality tools to assess the methodological quality of the RCTs. An exploratory factor analysis was conducted using the principal axis factoring (PAF) method followed by varimax rotation. Principal axis factoring identified 34 items loaded on 9 common factors: (1) selection bias; (2) performance and detection bias; (3) eligibility, intervention details, and description of outcome measures; (4) psychometric properties of the main outcome; (5) contamination and adherence to treatment; (6) attrition bias; (7) data analysis; (8) sample size; and (9) control and placebo adequacy. Because of the exploratory nature of the results, a confirmatory factor analysis is needed to validate this model. To the authors' knowledge, this is the first factor analysis to explore the underlying component items used to evaluate the methodological quality or risk of bias of RCTs in physical therapy. The items and factors represent a starting point for evaluating the methodological quality and risk of bias in physical therapy trials. Empirical evidence of the association among these items with treatment effects and a confirmatory factor analysis of these results are needed to validate these items. © 2014 American Physical Therapy Association.

Impact of a therapeutic educational program on quality of life in Alzheimer's disease: results of a pilot study.

PubMed

Villars, Hélène; Dupuy, Charlotte; Perrin, Amélie; Vellas, Bruno; Nourhashemi, Fati

2015-01-01

Therapeutic patient education is expanding in the field of Alzheimer's disease (AD). To evaluate the impact of a therapeutic educational program, on AD-affected patients and their caregivers, living in the community, on the patient's quality of life. Non experimental before and after study. Patient/caregiver dyads were recruited in the geriatric department of the Toulouse University Hospital. The intervention consisted of an educational program, designed for both patients and caregivers. It included two individual sessions (at baseline (M0) and two months later (M2)) and four group sessions for caregivers only, one per week between M0 and M2. The primary outcome was the patient's quality of life at two months, hetero-evaluated by the caregiver. We compared the QoL-AD score between M0 and M2 with a paired Student's test. The secondary outcomes were patient's autonomy (activities of daily living) and caregiver's burden (Zarit Burden interview). 29 patient/caregiver dyads were recruited. The QoL-AD score was 24.6 ± 5.1 at M0 versus 27.2 ± 6.0 at M2 (p = 0.038). This difference is statistically significant. There was no difference in the secondary outcomes. This study revealed a significant positive impact of a therapeutic educational program on patients' quality of life. Our results led us to design a randomized controlled trial called the THERAD study (THERapeutic education in Alzheimer's disease). It started in January 2013, and the results will be available in 2015. If the efficacy of this approach is proven, it will be important to implement educational programs in the care plan of these patients.

Effects of land use and seasonality on stream water quality in a small tropical catchment: The headwater of Córrego Água Limpa, São Paulo (Brazil).

PubMed

Rodrigues, Valdemir; Estrany, Joan; Ranzini, Mauricio; de Cicco, Valdir; Martín-Benito, José Mª Tarjuelo; Hedo, Javier; Lucas-Borja, Manuel E

2018-05-01

Stream water quality is controlled by the interaction of natural and anthropogenic factors over a range of temporal and spatial scales. Among these anthropogenic factors, land cover changes at catchment scale can affect stream water quality. This work aims to evaluate the influence of land use and seasonality on stream water quality in a representative tropical headwater catchment named as Córrego Água Limpa (Sao Paulo, Brasil), which is highly influenced by intensive agricultural activities and urban areas. Two systematic sampling approach campaigns were implemented with six sampling points along the stream of the headwater catchment to evaluate water quality during the rainy and dry seasons. Three replicates were collected at each sampling point in 2011. Electrical conductivity, nitrates, nitrites, sodium superoxide, Chemical Oxygen Demand (DQO), colour, turbidity, suspended solids, soluble solids and total solids were measured. Water quality parameters differed among sampling points, being lower at the headwater sampling point (0m above sea level), and then progressively higher until the last downstream sampling point (2500m above sea level). For the dry season, the mean discharge was 39.5ls -1 (from April to September) whereas 113.0ls -1 were averaged during the rainy season (from October to March). In addition, significant temporal and spatial differences were observed (P<0.05) for the fourteen parameters during the rainy and dry period. The study enhance significant relationships among land use and water quality and its temporal effect, showing seasonal differences between the land use and water quality connection, highlighting the importance of multiple spatial and temporal scales for understanding the impacts of human activities on catchment ecosystem services. Copyright © 2017 Elsevier B.V. All rights reserved.

Electrical investigations of hybrid OLED microcavity structures with novel encapsulation methods

NASA Astrophysics Data System (ADS)

Meister, Stefan; Brückner, Robert; Fröb, Hartmut; Leo, Karl

2016-04-01

An electrical driven organic solid state laser is a very challenging goal which is so far well beyond reach. As a step towards realization, we monolithically implemented an Organic Light Emitting Diode (OLED) into a dielectric, high quality microcavity (MC) consisting of two Distributed Bragg Reectors (DBR). In order to account for an optimal optical operation, the OLED structure has to be adapted. Furthermore, we aim to excite the device not only electrically but optically as well. Different OLED structures with an emission layer consisting of Alq3:DCM (2 wt%) were investigated. The External Quantum Efficiencies (EQE) of this hybrid structures are in the range of 1-2 %, as expected for this material combination. Including metal layers into a MC is complicated and has a huge impact on the device performance. Using Transfer-Matrix-Algorithm (TMA) simulations, the best positions for the metal electrodes are determined. First, the electroluminescence (EL) of the adjusted OLED structure on top of a DBR is measured under nitrogen atmosphere. The modes showed quality factors of Q = 60. After the deposition of the top DBR, the EL is measured again and the quality factors increased up to Q = 600. Considering the two 25-nm-thick-silver contacts a Q-factor of 600 is very high. The realization of a suitable encapsulation method is important. Two approaches were successfully tested. The first method is based on the substitution of a DBR layer with a layer produced via Atomic Layer Deposition (ALD). The second method uses a 0.15-mm-thick cover glass glued on top of the DBR with a 0.23-μm-thick single-component glue layer. Due to the working encapsulation, it is possible to investigate the sample under ambient conditions.

Ultraviolet irradiation: An effective inactivation method of Aspergillus spp. in water for the control of waterborne nosocomial aspergillosis.

PubMed

Nourmoradi, H; Nikaeen, M; Stensvold, C R; Mirhendi, H

2012-11-15

Invasive aspergillosis is the second most common cause of nosocomial fungal infections and occurring mainly by Aspergillus fumigatus, Aspergillus flavus, and Aspergillus niger. There is evidence that nosocomial aspergillosis may be waterborne. This study was conducted to evaluate the ultraviolet (UV) irradiation efficiency in terms of inactivating the most important Aspergillus species in water since these are potential sources for nosocomial aspergillosis. A continuous flow UV reactor which could be used as a point-of-use (POU) system was used to survey Aspergillus inactivation by UV irradiation. The inactivation efficiency of UV fluence (4.15-25 mJ/cm(2)) was measured by determination of fungal density in water before and after radiation. Because turbidity and iron concentration are two major water quality factors impacting UV disinfection effectiveness, the potential influence of these factors on UV inactivation of Aspergillus spp. was also measured. The 4 log inactivation for A. fumigatus, A. niger and A. flavus at a density of 1000 cfu/ml was achieved at UV fluences of 12.45 mJ/cm(2), 16.6 mJ/cm(2) and 20.75 mJ/cm(2), respectively. The inactivation efficiency for lower density (100 cfu/ml) was the same as for the higher density except for A. flavus. The removal efficiency of Aspergillus spp. was decreased by increasing the turbidity and iron concentration. UV disinfection could effectively inactivate Aspergillus spores from water and eliminate potential exposure of high-risk patients to fungal aerosols by installation of POU UV systems. Copyright © 2012 Elsevier Ltd. All rights reserved.

Development of a Prototype Continuity of Care Record with Context-Specific Links to Meet the Information Needs of Case Managers for Persons Living with HIV

PubMed Central

Cimino, James J.; Bakken, Suzanne

2012-01-01

Objectives (1) To develop a prototype Continuity of Care Record (CCR) with context-specific links to electronic HIV information resources; and (2) to assess case managers’ perceptions regarding the usability of the prototype. Methods We integrated context-specific links to HIV case management information resources into a prototype CCR using the Infobutton Manager and Librarian Infobutton Tailoring Environment (LITE). Case managers (N=9) completed a think-aloud protocol and the Computer System Usability Questionnaire (CSUQ) to evaluate the usability of the prototype. Verbalizations from the think-aloud protocol were summarized using thematic analysis. CSUQ data were analyzed with descriptive statistics. Results Although participants expressed positive comments regarding the usability of the prototype, the think-aloud protocol also identified the need for improvement in resource labels and for additional resources. On a scale ranging from 1 (strongly agree) to 7 (strongly disagree), the average CSUQ overall satisfaction was 2.25 indicating that users (n=9) were generally satisfied with the system. Mean CSUQ factor scores were: System Usefulness (M=2.13), Information Quality (M=2.46), and Interface Quality (M=2.26). Conclusion Our novel application of the Infobutton Manager and LITE in the context of case management for persons living with HIV in community-based settings resulted in a prototype CCR with infobuttons that met the majority of case managers’ information needs and received relatively positive usability ratings. Findings from this study inform future integration of context-specific links into CCRs and electronic health records and support their use for meeting end-users information needs. PMID:22632821

Calibration of low-temperature ac susceptometers with a copper cylinder standard

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, D.-X.; Skumryev, V.

2010-02-15

A high-quality low-temperature ac susceptometer is calibrated by comparing the measured ac susceptibility of a copper cylinder with its eddy-current ac susceptibility accurately calculated. Different from conventional calibration techniques that compare the measured results with the known property of a standard sample at certain fixed temperature T, field amplitude H{sub m}, and frequency f, to get a magnitude correction factor, here, the electromagnetic properties of the copper cylinder are unknown and are determined during the calibration of the ac susceptometer in the entire T, H{sub m}, and f range. It is shown that the maximum magnitude error and the maximummore » phase error of the susceptometer are less than 0.7% and 0.3 deg., respectively, in the region T=5-300 K and f=111-1111 Hz at H{sub m}=800 A/m, after a magnitude correction by a constant factor as done in a conventional calibration. However, the magnitude and phase errors can reach 2% and 4.3 deg. at 10 000 and 11 Hz, respectively. Since the errors are reproducible, a large portion of them may be further corrected after a calibration, the procedure for which is given. Conceptual discussions concerning the error sources, comparison with other calibration methods, and applications of ac susceptibility techniques are presented.« less