Spatial smoothing coherence factor for ultrasound computed tomography

NASA Astrophysics Data System (ADS)

Lou, Cuijuan; Xu, Mengling; Ding, Mingyue; Yuchi, Ming

2016-04-01

In recent years, many research studies have been carried out on ultrasound computed tomography (USCT) for its application prospect in early diagnosis of breast cancer. This paper applies four kinds of coherence-factor-like beamforming methods to improve the image quality of synthetic aperture focusing method for USCT, including the coherence-factor (CF), the phase coherence factor (PCF), the sign coherence factor (SCF) and the spatial smoothing coherence factor (SSCF) (proposed in our previous work). The performance of these methods was tested with simulated raw data which were generated by the ultrasound simulation software PZFlex 2014. The simulated phantom was set to be water of 4cm diameter with three nylon objects of different diameters inside. The ring-type transducer had 72 elements with a center frequency of 1MHz. The results show that all the methods can reveal the biggest nylon circle with the radius of 2.5mm. SSCF gets the highest SNR among the proposed methods and provides a more homogenous background. None of these methods can reveal the two smaller nylon circles with the radius of 0.75mm and 0.25mm. This may be due to the small number of elements.

Risk Factors for Neck and Upper Extremity Disorders among Computers Users and the Effect of Interventions: An Overview of Systematic Reviews

PubMed Central

Andersen, Johan H.; Fallentin, Nils; Thomsen, Jane F.; Mikkelsen, Sigurd

2011-01-01

Background To summarize systematic reviews that 1) assessed the evidence for causal relationships between computer work and the occurrence of carpal tunnel syndrome (CTS) or upper extremity musculoskeletal disorders (UEMSDs), or 2) reported on intervention studies among computer users/or office workers. Methodology/Principal Findings PubMed, Embase, CINAHL and Web of Science were searched for reviews published between 1999 and 2010. Additional publications were provided by content area experts. The primary author extracted all data using a purpose-built form, while two of the authors evaluated the quality of the reviews using recommended standard criteria from AMSTAR; disagreements were resolved by discussion. The quality of evidence syntheses in the included reviews was assessed qualitatively for each outcome and for the interventions. Altogether, 1,349 review titles were identified, 47 reviews were retrieved for full text relevance assessment, and 17 reviews were finally included as being relevant and of sufficient quality. The degrees of focus and rigorousness of these 17 reviews were highly variable. Three reviews on risk factors for carpal tunnel syndrome were rated moderate to high quality, 8 reviews on risk factors for UEMSDs ranged from low to moderate/high quality, and 6 reviews on intervention studies were of moderate to high quality. The quality of the evidence for computer use as a risk factor for CTS was insufficient, while the evidence for computer use and UEMSDs was moderate regarding pain complaints and limited for specific musculoskeletal disorders. From the reviews on intervention studies no strong evidence based recommendations could be given. Conclusions/Significance Computer use is associated with pain complaints, but it is still not very clear if this association is causal. The evidence for specific disorders or diseases is limited. No effective interventions have yet been documented. PMID:21589875

Risk factors for neck and upper extremity disorders among computers users and the effect of interventions: an overview of systematic reviews.

PubMed

Andersen, Johan H; Fallentin, Nils; Thomsen, Jane F; Mikkelsen, Sigurd

2011-05-12

To summarize systematic reviews that 1) assessed the evidence for causal relationships between computer work and the occurrence of carpal tunnel syndrome (CTS) or upper extremity musculoskeletal disorders (UEMSDs), or 2) reported on intervention studies among computer users/or office workers. PubMed, Embase, CINAHL and Web of Science were searched for reviews published between 1999 and 2010. Additional publications were provided by content area experts. The primary author extracted all data using a purpose-built form, while two of the authors evaluated the quality of the reviews using recommended standard criteria from AMSTAR; disagreements were resolved by discussion. The quality of evidence syntheses in the included reviews was assessed qualitatively for each outcome and for the interventions. Altogether, 1,349 review titles were identified, 47 reviews were retrieved for full text relevance assessment, and 17 reviews were finally included as being relevant and of sufficient quality. The degrees of focus and rigorousness of these 17 reviews were highly variable. Three reviews on risk factors for carpal tunnel syndrome were rated moderate to high quality, 8 reviews on risk factors for UEMSDs ranged from low to moderate/high quality, and 6 reviews on intervention studies were of moderate to high quality. The quality of the evidence for computer use as a risk factor for CTS was insufficient, while the evidence for computer use and UEMSDs was moderate regarding pain complaints and limited for specific musculoskeletal disorders. From the reviews on intervention studies no strong evidence based recommendations could be given. Computer use is associated with pain complaints, but it is still not very clear if this association is causal. The evidence for specific disorders or diseases is limited. No effective interventions have yet been documented.

The pattern space factor and quality factor of cylindrical source antennas

NASA Astrophysics Data System (ADS)

Jarem, John M.

1982-09-01

For the first time the quality factor of cylindrical source antennas is derived by a plane wave expansion. The evanescent energy (and therefore the quality factor) as defined by a plane wave expansion is shown to be different from Collin and Rothschild's [IEEE Trans. Antennas Propagation AP-12, 23 (1964)] quality factor.

Hanford meteorological station computer codes: Volume 9, The quality assurance computer codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burk, K.W.; Andrews, G.L.

1989-02-01

The Hanford Meteorological Station (HMS) was established in 1944 on the Hanford Site to collect and archive meteorological data and provide weather forecasts and related services for Hanford Site approximately 1/2 mile east of the 200 West Area and is operated by PNL for the US Department of Energy. Meteorological data are collected from various sensors and equipment located on and off the Hanford Site. These data are stored in data bases on the Digital Equipment Corporation (DEC) VAX 11/750 at the HMS (hereafter referred to as the HMS computer). Files from those data bases are routinely transferred to themore » Emergency Management System (EMS) computer at the Unified Dose Assessment Center (UDAC). To ensure the quality and integrity of the HMS data, a set of Quality Assurance (QA) computer codes has been written. The codes will be routinely used by the HMS system manager or the data base custodian. The QA codes provide detailed output files that will be used in correcting erroneous data. The following sections in this volume describe the implementation and operation of QA computer codes. The appendices contain detailed descriptions, flow charts, and source code listings of each computer code. 2 refs.« less

Analysis of Thickness and Quality factor of a Double Paddle Oscillator at Room Temperature.

PubMed

Shakeel, Hamza; Metcalf, Thomas H; Pomeroy, J M

2016-01-01

In this paper, we evaluate the quality (Q) factor and the resonance frequency of a double paddle oscillator (DPO) with different thickness using analytical, computational and experimental methods. The study is carried out for the 2 nd anti-symmetric resonance mode that provides extremely high experimental Q factors on the order of 10 5 . The results show that both the Q factor and the resonance frequency of a DPO increase with the thickness at room temperature.

Preliminary Study for a Tetrahedron Formation: Quality Factors and Visualization

NASA Technical Reports Server (NTRS)

Guzman, Jose J.; Schiff, Conrad; Bauer, Frank (Technical Monitor)

2002-01-01

Spacecraft flying in tetrahedron formations are excellent for electromagnetic and plasma studies. The quality of the science recorded is strongly affected by the tetrahedron evolution. This paper is a preliminary study on the computation of quality factors and visualization for a formation of four or five satellites. Four of the satellites are arranged geometrically in a tetrahedron shape. If a fifth satellite is present, it is arbitrarily initialized at the geometric center of the tetrahedron. The fifth satellite could act as a collector or as a spare spacecraft. Tetrahedron natural coordinates are employed for the initialization. The natural orbit evolution is visualized in geocentric equatorial inertial and in geocentric solar magnetospheric coordinates.

The relationship between computer games and quality of life in adolescents.

PubMed

Dolatabadi, Nayereh Kasiri; Eslami, Ahmad Ali; Mostafavi, Firooze; Hassanzade, Akbar; Moradi, Azam

2013-01-01

Term of doing computer games among teenagers is growing rapidly. This popular phenomenon can cause physical and psychosocial issues in them. Therefore, this study examined the relationship between computer games and quality of life domains in adolescents aging 12-15 years. In a cross-sectional study using the 2-stage stratified cluster sampling method, 444 male and female students in Borkhar were selected. The data collection tool consisted of 1) World Health Organization Quality Of Life - BREF questionnaire and 2) personal information questionnaire. The data were analyzed by Pearson correlation, Spearman correlation, chi-square, independent t-tests and analysis of covariance. The total mean score of quality of life in students was 67.11±13.34. The results showed a significant relationship between the age of starting to play games and the overall quality of life score and its fourdomains (range r=-0.13 to -0.18). The mean of overall quality of life score in computer game users was 68.27±13.03 while it was 64.81±13.69 among those who did not play computer games and the difference was significant (P=0.01). There were significant differences in environmental and mental health domains between the two groups (P<0.05). However, there was no significant relationship between BMI with the time spent and the type of computer games. Playing computer games for a short time under parental supervision can have positive effects on quality of life in adolescents. However, spending long hours for playing computer games may have negative long-term effects.

Factors affecting dental service quality.

PubMed

Bahadori, Mohammadkarim; Raadabadi, Mehdi; Ravangard, Ramin; Baldacchino, Donia

2015-01-01

Measuring dental clinic service quality is the first and most important factor in improving care. The quality provided plays an important role in patient satisfaction. The purpose of this paper is to identify factors affecting dental service quality from the patients' viewpoint. This cross-sectional, descriptive-analytical study was conducted in a dental clinic in Tehran between January and June 2014. A sample of 385 patients was selected from two work shifts using stratified sampling proportional to size and simple random sampling methods. The data were collected, a self-administered questionnaire designed for the purpose of the study, based on the Parasuraman and Zeithaml's model of service quality which consisted of two parts: the patients' demographic characteristics and a 30-item questionnaire to measure the five dimensions of the service quality. The collected data were analysed using SPSS 21.0 and Amos 18.0 through some descriptive statistics such as mean, standard deviation, as well as analytical methods, including confirmatory factor. Results showed that the correlation coefficients for all dimensions were higher than 0.5. In this model, assurance (regression weight=0.99) and tangibility (regression weight=0.86) had, respectively, the highest and lowest effects on dental service quality. The Parasuraman and Zeithaml's model is suitable to measure quality in dental services. The variables related to dental services quality have been made according to the model. This is a pioneering study that uses Parasuraman and Zeithaml's model and CFA in a dental setting. This study provides useful insights and guidance for dental service quality assurance.

Determination of quality factors by microdosimetry

NASA Astrophysics Data System (ADS)

Al-Affan, I. A. M.; Watt, D. E.

1987-03-01

The application of microdose parameters for the specification of a revised scale of quality factors which would be applicable at low doses and dose rates is examined in terms of an original proposal by Rossi. Two important modifications are suggested to enable an absolute scale of quality factors to be constructed. Allowance should be made to allow for the dependence of the saturation threshold of lineal energy on the type of heavy charged particle. Also, an artificial saturation threshold should be introduced for electron tracks as a mean of modifying the measurements made in the microdosimeter to the more realistic site sizes of nanometer dimensions. The proposed absolute scale of quality factors nicely encompasses the high RBEs of around 3 observed at low doses for tritium β rays and is consistent with the recent recommendation of the ICRP that the quality factor for fast neutrons be increased by a factor of two, assuming that there is no biological repair for the reference radiation.

Patient size and x-ray technique factors in head computed tomography examinations. II. Image quality.

PubMed

Huda, Walter; Lieberman, Kristin A; Chang, Jack; Roskopf, Marsha L

2004-03-01

We investigated how patient head characteristics, as well as the choice of x-ray technique factors, affect lesion contrast and noise values in computed tomography (CT) images. Head sizes and mean Hounsfield unit (HU) values were obtained from head CT images for five classes of patients ranging from the newborn to adults. X-ray spectra with tube voltages ranging from 80 to 140 kV were used to compute the average photon energy, and energy fluence, transmitted through the heads of patients of varying size. Image contrast, and the corresponding contrast to noise ratios (CNRs), were determined for lesions of fat, muscle, and iodine relative to a uniform water background. Maintaining a constant image CNR for each lesion, the patient energy imparted was also computed to identify the x-ray tube voltage that minimized the radiation dose. For adults, increasing the tube voltage from 80 to 140 kV changed the iodine HU from 2.62 x 10(5) to 1.27 x 10(5), the fat HU from -138 to -108, and the muscle HU from 37.1 to 33.0. Increasing the x-ray tube voltage from 80 to 140 kV increased the percentage energy fluence transmission by up to a factor of 2. For a fixed x-ray tube voltage, the percentage transmitted energy fluence in adults was more than a factor of 4 lower than for newborns. For adults, increasing the x-ray tube voltage from 80 to 140 kV improved the CNR for muscle lesions by 130%, for fat lesions by a factor of 2, and for iodine lesions by 25%. As the size of the patient increased from newborn to adults, lesion CNR was reduced by about a factor of 2. The mAs value can be reduced by 80% when scanning newborns while maintaining the same lesion CNR as for adults. Maintaining the CNR of an iodine lesion at a constant level, use of 140 kV increases the energy imparted to an adult patient by nearly a factor of 3.5 in comparison to 80 kV. For fat and muscle lesions, raising the x-ray tube voltage from 80 to 140 kV at a constant CNR increased the patient dose by 37% and 7

SU-F-BRD-15: Quality Correction Factors in Scanned Or Broad Proton Therapy Beams Are Indistinguishable

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sorriaux, J; Lee, J; ICTEAM Institute, Universite catholique de Louvain, Louvain-la-Neuve

2015-06-15

Purpose: The IAEA TRS-398 code of practice details the reference conditions for reference dosimetry of proton beams using ionization chambers and the required beam quality correction factors (kQ). Pencil beam scanning (PBS) requires multiple spots to reproduce the reference conditions. The objective is to demonstrate, using Monte Carlo (MC) calculations, that kQ factors for broad beams can be used for scanned beams under the same reference conditions with no significant additional uncertainty. We consider hereafter the general Alfonso formalism (Alfonso et al, 2008) for non-standard beam. Methods: To approach the reference conditions and the associated dose distributions, PBS must combinemore » many pencil beams with range modulation and shaping techniques different than those used in passive systems (broad beams). This might lead to a different energy spectrum at the measurement point. In order to evaluate the impact of these differences on kQ factors, ion chamber responses are computed with MC (Geant4 9.6) in a dedicated scanned pencil beam (Q-pcsr) producing a 10×10cm2 composite field with a flat dose distribution from 10 to 16 cm depth. Ion chamber responses are also computed by MC in a broad beam with quality Q-ds (double scattering). The dose distribution of Q -pcsr matches the dose distribution of Q-ds. k-(Q-pcsr,Q-ds) is computed for a 2×2×0.2cm{sup 3} idealized air cavity and a realistic plane-parallel ion chamber (IC). Results: Under reference conditions, quality correction factors for a scanned composite field versus a broad beam are the same for air cavity dose response, k-(Q-pcsr,Q-ds) =1.001±0.001 and for a Roos IC, k-(Q-pcsr,Q-ds) =0.999±0.005. Conclusion: Quality correction factors for ion chamber response in scanned and broad proton therapy beams are identical under reference conditions within the calculation uncertainties. The results indicate that quality correction factors published in IAEA TRS-398 can be used for scanned beams in the

The relationship between computer games and quality of life in adolescents

PubMed Central

Dolatabadi, Nayereh Kasiri; Eslami, Ahmad Ali; Mostafavi, Firooze; Hassanzade, Akbar; Moradi, Azam

2013-01-01

Background: Term of doing computer games among teenagers is growing rapidly. This popular phenomenon can cause physical and psychosocial issues in them. Therefore, this study examined the relationship between computer games and quality of life domains in adolescents aging 12-15 years. Materials and Methods: In a cross-sectional study using the 2-stage stratified cluster sampling method, 444 male and female students in Borkhar were selected. The data collection tool consisted of 1) World Health Organization Quality Of Life – BREF questionnaire and 2) personal information questionnaire. The data were analyzed by Pearson correlation, Spearman correlation, chi-square, independent t-tests and analysis of covariance. Findings: The total mean score of quality of life in students was 67.11±13.34. The results showed a significant relationship between the age of starting to play games and the overall quality of life score and its fourdomains (range r=–0.13 to –0.18). The mean of overall quality of life score in computer game users was 68.27±13.03 while it was 64.81±13.69 among those who did not play computer games and the difference was significant (P=0.01). There were significant differences in environmental and mental health domains between the two groups (P<0.05). However, there was no significant relationship between BMI with the time spent and the type of computer games. Conclusion: Playing computer games for a short time under parental supervision can have positive effects on quality of life in adolescents. However, spending long hours for playing computer games may have negative long-term effects. PMID:24083270

Weighting factors for radiation quality: how to unite the two current concepts.

PubMed

Kellerer, Albrecht M

2004-01-01

The quality factor, Q(L), used to be the universal weighting factor to account for radiation quality, until--in its 1991 Recommendations--the ICRP established a dichotomy between 'computable' and 'measurable' quantities. The new concept of the radiation weighting factor, w(R), was introduced for use with the 'computable' quantities, such as the effective dose, E. At the same time, the application of Q(L) was restricted to 'measurable' quantities, such as the operational quantities ambient dose equivalent or personal dose equivalent. The result has been a dual system of incoherent dosimetric quantities. The most conspicuous inconsistency resulted for neutrons, for which the new concept of wR had been primarily designed. While its definition requires an accounting for the gamma rays produced by neutron capture in the human body, this effect is not adequately reflected in the numerical values of wR, which are now suitable for mice, but are--at energies of the incident neutrons below 1 MeV--conspicuously too large for man. A recent Report 92 to ICRP has developed a proposal to correct the current imbalance and to define a linkage between the concepts Q(L) and wR. The proposal is here considered within a broader assessment of the rationale that led to the current dual system of dosimetric quantities.

Chapter 11. Quality evaluation of apple by computer vision

USDA-ARS?s Scientific Manuscript database

Apple is one of the most consumed fruits in the world, and there is a critical need for enhanced computer vision technology for quality assessment of apples. This chapter gives a comprehensive review on recent advances in various computer vision techniques for detecting surface and internal defects ...

Computer program CDCID: an automated quality control program using CDC update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singer, G.L.; Aguilar, F.

1984-04-01

A computer program, CDCID, has been developed in coordination with a quality control program to provide a highly automated method of documenting changes to computer codes at EG and G Idaho, Inc. The method uses the standard CDC UPDATE program in such a manner that updates and their associated documentation are easily made and retrieved in various formats. The method allows each card image of a source program to point to the document which describes it, who created the card, and when it was created. The method described is applicable to the quality control of computer programs in general. Themore » computer program described is executable only on CDC computing systems, but the program could be modified and applied to any computing system with an adequate updating program.« less

Computer vision syndrome among computer office workers in a developing country: an evaluation of prevalence and risk factors.

PubMed

Ranasinghe, P; Wathurapatha, W S; Perera, Y S; Lamabadusuriya, D A; Kulatunga, S; Jayawardana, N; Katulanda, P

2016-03-09

Computer vision syndrome (CVS) is a group of visual symptoms experienced in relation to the use of computers. Nearly 60 million people suffer from CVS globally, resulting in reduced productivity at work and reduced quality of life of the computer worker. The present study aims to describe the prevalence of CVS and its associated factors among a nationally-representative sample of Sri Lankan computer workers. Two thousand five hundred computer office workers were invited for the study from all nine provinces of Sri Lanka between May and December 2009. A self-administered questionnaire was used to collect socio-demographic data, symptoms of CVS and its associated factors. A binary logistic regression analysis was performed in all patients with 'presence of CVS' as the dichotomous dependent variable and age, gender, duration of occupation, daily computer usage, pre-existing eye disease, not using a visual display terminal (VDT) filter, adjusting brightness of screen, use of contact lenses, angle of gaze and ergonomic practices knowledge as the continuous/dichotomous independent variables. A similar binary logistic regression analysis was performed in all patients with 'severity of CVS' as the dichotomous dependent variable and other continuous/dichotomous independent variables. Sample size was 2210 (response rate-88.4%). Mean age was 30.8 ± 8.1 years and 50.8% of the sample were males. The 1-year prevalence of CVS in the study population was 67.4%. Female gender (OR: 1.28), duration of occupation (OR: 1.07), daily computer usage (1.10), pre-existing eye disease (OR: 4.49), not using a VDT filter (OR: 1.02), use of contact lenses (OR: 3.21) and ergonomics practices knowledge (OR: 1.24) all were associated with significantly presence of CVS. The duration of occupation (OR: 1.04) and presence of pre-existing eye disease (OR: 1.54) were significantly associated with the presence of 'severe CVS'. Sri Lankan computer workers had a high prevalence of CVS. Female gender

Quality factor analysis for aberrated laser beam

NASA Astrophysics Data System (ADS)

Ghafary, B.; Alavynejad, M.; Kashani, F. D.

2006-12-01

The quality factor of laser beams has attracted considerable attention and some different approaches have been reported to treat the problem. In this paper we analyze quality factor of laser beam and compare the effect of different aberrations on beam quality by expanding pure phase term of wavefront in terms of Zernike polynomials. Also we analyze experimentally the change of beam quality for different Astigmatism aberrations, and compare theoretical results with experimentally results. The experimental and theoretical results are in good agreement.

Quality grading of Atlantic salmon (Salmo salar) by computer vision.

PubMed

Misimi, E; Erikson, U; Skavhaug, A

2008-06-01

In this study, we present a promising method of computer vision-based quality grading of whole Atlantic salmon (Salmo salar). Using computer vision, it was possible to differentiate among different quality grades of Atlantic salmon based on the external geometrical information contained in the fish images. Initially, before the image acquisition, the fish were subjectively graded and labeled into grading classes by a qualified human inspector in the processing plant. Prior to classification, the salmon images were segmented into binary images, and then feature extraction was performed on the geometrical parameters of the fish from the grading classes. The classification algorithm was a threshold-based classifier, which was designed using linear discriminant analysis. The performance of the classifier was tested by using the leave-one-out cross-validation method, and the classification results showed a good agreement between the classification done by human inspectors and by the computer vision. The computer vision-based method classified correctly 90% of the salmon from the data set as compared with the classification by human inspector. Overall, it was shown that computer vision can be used as a powerful tool to grade Atlantic salmon into quality grades in a fast and nondestructive manner by a relatively simple classifier algorithm. The low cost of implementation of today's advanced computer vision solutions makes this method feasible for industrial purposes in fish plants as it can replace manual labor, on which grading tasks still rely.

Aesthetics by Numbers: Links between Perceived Texture Qualities and Computed Visual Texture Properties.

PubMed

Jacobs, Richard H A H; Haak, Koen V; Thumfart, Stefan; Renken, Remco; Henson, Brian; Cornelissen, Frans W

2016-01-01

Our world is filled with texture. For the human visual system, this is an important source of information for assessing environmental and material properties. Indeed-and presumably for this reason-the human visual system has regions dedicated to processing textures. Despite their abundance and apparent relevance, only recently the relationships between texture features and high-level judgments have captured the interest of mainstream science, despite long-standing indications for such relationships. In this study, we explore such relationships, as these might be used to predict perceived texture qualities. This is relevant, not only from a psychological/neuroscience perspective, but also for more applied fields such as design, architecture, and the visual arts. In two separate experiments, observers judged various qualities of visual textures such as beauty, roughness, naturalness, elegance, and complexity. Based on factor analysis, we find that in both experiments, ~75% of the variability in the judgments could be explained by a two-dimensional space, with axes that are closely aligned to the beauty and roughness judgments. That a two-dimensional judgment space suffices to capture most of the variability in the perceived texture qualities suggests that observers use a relatively limited set of internal scales on which to base various judgments, including aesthetic ones. Finally, for both of these judgments, we determined the relationship with a large number of texture features computed for each of the texture stimuli. We find that the presence of lower spatial frequencies, oblique orientations, higher intensity variation, higher saturation, and redness correlates with higher beauty ratings. Features that captured image intensity and uniformity correlated with roughness ratings. Therefore, a number of computational texture features are predictive of these judgments. This suggests that perceived texture qualities-including the aesthetic appreciation-are sufficiently

Computing rank-revealing QR factorizations of dense matrices.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bischof, C. H.; Quintana-Orti, G.; Mathematics and Computer Science

1998-06-01

We develop algorithms and implementations for computing rank-revealing QR (RRQR) factorizations of dense matrices. First, we develop an efficient block algorithm for approximating an RRQR factorization, employing a windowed version of the commonly used Golub pivoting strategy, aided by incremental condition estimation. Second, we develop efficiently implementable variants of guaranteed reliable RRQR algorithms for triangular matrices originally suggested by Chandrasekaran and Ipsen and by Pan and Tang. We suggest algorithmic improvements with respect to condition estimation, termination criteria, and Givens updating. By combining the block algorithm with one of the triangular postprocessing steps, we arrive at an efficient and reliablemore » algorithm for computing an RRQR factorization of a dense matrix. Experimental results on IBM RS/6000 SGI R8000 platforms show that this approach performs up to three times faster that the less reliable QR factorization with column pivoting as it is currently implemented in LAPACK, and comes within 15% of the performance of the LAPACK block algorithm for computing a QR factorization without any column exchanges. Thus, we expect this routine to be useful in may circumstances where numerical rank deficiency cannot be ruled out, but currently has been ignored because of the computational cost of dealing with it.« less

Factors associated with sleep quality among operating engineers.

PubMed

Choi, Seung Hee; Terrell, Jeffrey E; Pohl, Joanne M; Redman, Richard W; Duffy, Sonia A

2013-06-01

Blue collar workers generally report high job stress and are exposed to loud noises at work and engage in many of risky health behavioral factors, all of which have been associated with poor sleep quality. However, sleep quality of blue collar workers has not been studied extensively, and no studies have focused Operating Engineers (heavy equipment operators) among whom daytime fatigue would place them at high risk for accidents. Therefore, the purpose of this study was to determine variables associated with sleep quality among Operating Engineers. This was a cross-sectional survey design with a dependent variable of sleep quality and independent variables of personal and related health behavioral factors. A convenience sample of 498 Operating Engineers was recruited from approximately 16,000 Operating Engineers from entire State of Michigan in 2008. Linear regression was used to determine personal and related health behavior factors associated with sleep quality. Multivariate analyses showed that personal factors related to poor sleep quality were younger age, female sex, higher pain, more medical comorbidities and depressive symptoms and behavioral factors related to poor sleep quality were nicotine dependence. While sleep scores were similar to population norms, approximately 34 % (n = 143) showed interest in health services for sleep problems. While many personal factors are not changeable, interventions to improve sleep hygiene as well as interventions to treat pain, depression and smoking may improve sleep quality resulting in less absenteeism, fatal work accidents, use of sick leave, work disability, medical comorbidities, as well as subsequent mortality.

Factors Associated With Sleep Quality Among Operating Engineers

PubMed Central

Choi, Seung Hee; Terrell, Jeffrey E.; Pohl, Joanne M.; Redman, Richard W.

2016-01-01

Blue collar workers generally report high job stress and are exposed to loud noises at work and engage in many of the health behavioral factors, all of which have been associated with poor sleep quality. However, sleep quality of blue collar workers has not been studied extensively, and no studies have focused Operating Engineers (heavy equipment operators) among whom daytime fatigue would place them at high risk for accidents. Therefore, the purpose of this study was to determine variables associated with sleep quality among Operating Engineers. This was a cross-sectional survey design with a dependent variable of sleep quality and independent variables of personal and related health behavioral factors. A convenience sample of 498 Operating Engineers was recruited from approximately 16,000 Operating Engineers from entire State of Michigan in 2008. Linear regression was used to determine personal and related health behavior factors associated with sleep quality. Multivariate analyses showed that personal factors related to poor sleep quality were younger age, female sex, higher pain, more medical comorbidities and depressive symptoms and behavioral factors related to poor sleep quality were nicotine dependence. While sleep scores were similar to population norms, approximately 34% (n=143) showed interest in health services for sleep problems. While many personal factors are not changeable, interventions to improve sleep hygiene as well as interventions to treat pain, depression and smoking may improve sleep quality resulting in less absenteeism, fatal work accidents, use of sick leave, work disability, medical comorbidities, as well as subsequent mortality. PMID:23393021

Combining Archetypes, Ontologies and Formalization Enables Automated Computation of Quality Indicators.

PubMed

Legaz-García, María Del Carmen; Dentler, Kathrin; Fernández-Breis, Jesualdo Tomás; Cornet, Ronald

2017-01-01

ArchMS is a framework that represents clinical information and knowledge using ontologies in OWL, which facilitates semantic interoperability and thereby the exploitation and secondary use of clinical data. However, it does not yet support the automated assessment of quality of care. CLIF is a stepwise method to formalize quality indicators. The method has been implemented in the CLIF tool which supports its users in generating computable queries based on a patient data model which can be based on archetypes. To enable the automated computation of quality indicators using ontologies and archetypes, we tested whether ArchMS and the CLIF tool can be integrated. We successfully automated the process of generating SPARQL queries from quality indicators that have been formalized with CLIF and integrated them into ArchMS. Hence, ontologies and archetypes can be combined for the execution of formalized quality indicators.

Computer image analysis in caryopses quality evaluation as exemplified by malting barley

NASA Astrophysics Data System (ADS)

Koszela, K.; Raba, B.; Zaborowicz, M.; Przybył, K.; Wojcieszak, D.; Czekała, W.; Ludwiczak, A.; Przybylak, A.; Boniecki, P.; Przybył, J.

2015-07-01

One of the purposes to employ modern technologies in agricultural and food industry is to increase the efficiency and automation of production processes, which helps improve productive effectiveness of business enterprises, thus making them more competitive. Nowadays, a challenge presents itself for this branch of economy, to produce agricultural and food products characterized by the best parameters in terms of quality, while maintaining optimum production and distribution costs of the processed biological material. Thus, several scientific centers seek to devise new and improved methods and technologies in this field, which will allow to meet the expectations. A new solution, under constant development, is to employ the so-called machine vision which is to replace human work in both quality and quantity evaluation processes. An indisputable advantage of employing the method is keeping the evaluation unbiased while improving its rate and, what is important, eliminating the fatigue factor of the expert. This paper elaborates on the topic of quality evaluation by marking the contamination in malting barley grains using computer image analysis and selected methods of artificial intelligence [4-5].

Factors affecting and affected by user acceptance of computer-based nursing documentation: results of a two-year study.

PubMed

Ammenwerth, Elske; Mansmann, Ulrich; Iller, Carola; Eichstädter, Ronald

2003-01-01

The documentation of the nursing process is an important but often neglected part of clinical documentation. Paper-based systems have been introduced to support nursing process documentation. Frequently, however, problems such as low quality of documentation are reported. It is unclear whether computer-based documentation systems can reduce these problems and which factors influence their acceptance by users. We introduced a computer-based nursing documentation system on four wards of the University Hospitals of Heidelberg and systematically evaluated its preconditions and its effects in a pretest-posttest intervention study. For the analysis of user acceptance, we concentrated on subjective data drawn from questionnaires and interviews. A questionnaire was developed using items from published questionnaires and items that had to be developed for the special purpose of this study. The quantitative results point to two factors influencing the acceptance of a new computer-based documentation system: the previous acceptance of the nursing process and the previous amount of self-confidence when using computers. On one ward, the diverse acceptance scores heavily declined after the introduction of the nursing documentation system. Explorative qualitative analysis on this ward points to further success factors of computer-based nursing documentation systems. Our results can be used to assist the planning and introduction of computer-based nursing documentation systems. They demonstrate the importance of computer experience and acceptance of the nursing process on a ward but also point to other factors such as the fit between nursing workflow and the functionality of a nursing documentation system.

Strategies for a Creative Future with Computer Science, Quality Design and Communicability

NASA Astrophysics Data System (ADS)

Cipolla Ficarra, Francisco V.; Villarreal, Maria

In the current work is presented the importance of the two-way triad between computer science, design and communicability. It is demonstrated how the principles of quality of software engineering are not universal since they are disappearing inside university training. Besides, a short analysis of the term "creativity" males apparent the existence of plagiarism as a human factor that damages the future of communicability applied to the on-line and off-line contents of the open software. A set of measures and guidelines are presented so that the triad works again correctly in the next years to foster the qualitative design of the interactive systems on-line and/or off-line.

Aesthetics by Numbers: Links between Perceived Texture Qualities and Computed Visual Texture Properties

PubMed Central

Jacobs, Richard H. A. H.; Haak, Koen V.; Thumfart, Stefan; Renken, Remco; Henson, Brian; Cornelissen, Frans W.

2016-01-01

Our world is filled with texture. For the human visual system, this is an important source of information for assessing environmental and material properties. Indeed—and presumably for this reason—the human visual system has regions dedicated to processing textures. Despite their abundance and apparent relevance, only recently the relationships between texture features and high-level judgments have captured the interest of mainstream science, despite long-standing indications for such relationships. In this study, we explore such relationships, as these might be used to predict perceived texture qualities. This is relevant, not only from a psychological/neuroscience perspective, but also for more applied fields such as design, architecture, and the visual arts. In two separate experiments, observers judged various qualities of visual textures such as beauty, roughness, naturalness, elegance, and complexity. Based on factor analysis, we find that in both experiments, ~75% of the variability in the judgments could be explained by a two-dimensional space, with axes that are closely aligned to the beauty and roughness judgments. That a two-dimensional judgment space suffices to capture most of the variability in the perceived texture qualities suggests that observers use a relatively limited set of internal scales on which to base various judgments, including aesthetic ones. Finally, for both of these judgments, we determined the relationship with a large number of texture features computed for each of the texture stimuli. We find that the presence of lower spatial frequencies, oblique orientations, higher intensity variation, higher saturation, and redness correlates with higher beauty ratings. Features that captured image intensity and uniformity correlated with roughness ratings. Therefore, a number of computational texture features are predictive of these judgments. This suggests that perceived texture qualities—including the aesthetic appreciation�

Software metrics: Software quality metrics for distributed systems. [reliability engineering

NASA Technical Reports Server (NTRS)

Post, J. V.

1981-01-01

Software quality metrics was extended to cover distributed computer systems. Emphasis is placed on studying embedded computer systems and on viewing them within a system life cycle. The hierarchy of quality factors, criteria, and metrics was maintained. New software quality factors were added, including survivability, expandability, and evolvability.

Computer users' ergonomics and quality of life - evidence from a developing country.

PubMed

Ahmed, Ishfaq; Shaukat, Muhammad Zeeshan

2018-06-01

This study is aimed at investigating the quality of workplace ergonomics at various Pakistani organizations and quality of life of computer users working in these organizations. Two hundred and thirty-five computer users (only those employees who have to do most of their job tasks on computer or laptop, and at their office) responded by filling the questionnaire covering questions on workplace ergonomics and quality of life. Findings of the study revealed the ergonomics at those organizations was poor and unfavourable. The quality of life (both physical and mental health of the employees) of respondents was poor for employees who had unfavourable ergonomic environment. The findings thus highlight an important issue prevalent at Pakistani work settings.

Human factors in the Naval Air Systems Command: Computer based training

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seamster, T.L.; Snyder, C.E.; Terranova, M.

1988-01-01

Military standards applied to the private sector contracts have a substantial effect on the quality of Computer Based Training (CBT) systems procured for the Naval Air Systems Command. This study evaluated standards regulating the following areas in CBT development and procurement: interactive training systems, cognitive task analysis, and CBT hardware. The objective was to develop some high-level recommendations for evolving standards that will govern the next generation of CBT systems. One of the key recommendations is that there be an integration of the instructional systems development, the human factors engineering, and the software development standards. Recommendations were also made formore » task analysis and CBT hardware standards. (9 refs., 3 figs.)« less

[The Computer Competency of Nurses in Long-Term Care Facilities and Related Factors].

PubMed

Chang, Ya-Ping; Kuo, Huai-Ting; Li, I-Chuan

2016-12-01

It is important for nurses who work in long-term care facilities (LTCFs) to have an adequate level of computer competency due to the multidisciplinary and comprehensive nature of long-term care services. Thus, it is important to understand the current computer competency of nursing staff in LTCFs and the factors that relate to this competency. To explore the computer competency of LTCF nurses and to identify the demographic and computer-usage characteristics that relate significantly to computer competency in the LTCF environment. A cross-sectional research design and a self-report questionnaire were used to collect data from 185 nurses working at LTCFs in Taipei. The results found that the variables of the frequency of computer use (β = .33), age (β = -.30), type(s) of the software used at work (β = .28), hours of on-the-job training (β = -.14), prior work experience at other LTCFs (β = -.14), and Internet use at home (β = .12) explain 58.0% of the variance in the computer competency of participants. The results of the present study suggest that the following measures may help increase the computer competency of LTCF nurses. (1) Nurses should be encouraged to use electronic nursing records rather than handwritten records. (2) On-the-job training programs should emphasize participant competency in the Excel software package in order to maintain efficient and good-quality of LTC services after implementing of the LTC insurance policy.

Factors Influencing Exemplary Science Teachers' Levels of Computer Use

ERIC Educational Resources Information Center

Hakverdi, Meral; Dana, Thomas M.; Swain, Colleen

2011-01-01

The purpose of this study was to examine exemplary science teachers' use of technology in science instruction, factors influencing their level of computer use, their level of knowledge/skills in using specific computer applications for science instruction, their use of computer-related applications/tools during their instruction, and their…

Quality factor concept in piezoceramic transformer performance description.

PubMed

Mezheritsky, Alex V

2006-02-01

A new general approach based on the quality factor concept to piezoceramic transformer (PT) performance description is proposed. The system's quality factor, material elastic anisotropy, and coupling factors of the input and output sections of an electrically excited and electrically loaded PT fully characterize its resonance and near-resonance behavior. The PT efficiency, transformation ratio, and input and output power were analytically analyzed and simulated as functions of the load and frequency for the simplest classical Langevin-type and Rosen-type PT designs. A new formulation of the electrical input impedance allows one to separate the power consumed by PT from the power transferred into the load. The system's PT quality factor takes into account losses in each PT "input-output-load" functional components. The loading process is changing PT input electrical impedance on the way that under loading the minimum series impedance is increasing and the maximum parallel impedance is decreasing coincidentally. The quality-factors ratio, between the states of fully loaded and nonloaded PT, is one of the best measures of PTs dynamic performance--practically, the lower the ratio is, the better PT efficiency. A simple and effective method for the loaded PT quality factor determination is proposed. As was found, a piezoceramic with low piezoelectric anisotropy is required to provide maximum PT efficiency and higher corresponding voltage gain. Limitations on the PT output voltage and power, caused by nonlinear effects in piezoceramics, were established.

Environmental factors contributed to circannual rhythm of semen quality.

PubMed

Mao, Huan; Feng, Lei; Yang, Wan-Xi

2017-01-01

We investigated whether human semen parameters present circannual rhythm or not, and whether environmental factors exert on semen quality. This retrospective study used data of patients mainly from Reproductive Medicine Center and Urology and Andrology Clinic of a general hospital in China. Sperm concentration and motility were measured by computer aided sperm analysis (CASA). Sperm morphology was scored based on the strict criteria (WHO, 2010). The Kruskal-Wallis rank test was used to investigate the relationship between semen parameters and season/month. Partial correlation coefficients were used to analyze the relationship between semen parameters and environmental factors. In this study, we found that sperm concentration and total amount per ejaculate were significantly lower in summer and higher in winter. But, sperm progressive motility and motility were significantly higher in spring and summer (from March to June), lower in autumn and winter (September and October). Unexpectedly, normal sperm morphology and mixed agglutination reaction (MAR) positive rate didn't vary along with season or month. Furthermore, temperature was negatively related to sperm concentration and total amount per ejaculate. Precipitation was positively associated with progressive motility and normal sperm morphology, but negatively related to sperm head defect percentage. The length of sunlight was positively related to progressive motility. The Air Quality Index (AQI) was positively associated with semen volume and sperm total amount per ejaculate. These suggest seasonal and monthly variation underlying some semen parameters.

Federated Tensor Factorization for Computational Phenotyping

PubMed Central

Kim, Yejin; Sun, Jimeng; Yu, Hwanjo; Jiang, Xiaoqian

2017-01-01

Tensor factorization models offer an effective approach to convert massive electronic health records into meaningful clinical concepts (phenotypes) for data analysis. These models need a large amount of diverse samples to avoid population bias. An open challenge is how to derive phenotypes jointly across multiple hospitals, in which direct patient-level data sharing is not possible (e.g., due to institutional policies). In this paper, we developed a novel solution to enable federated tensor factorization for computational phenotyping without sharing patient-level data. We developed secure data harmonization and federated computation procedures based on alternating direction method of multipliers (ADMM). Using this method, the multiple hospitals iteratively update tensors and transfer secure summarized information to a central server, and the server aggregates the information to generate phenotypes. We demonstrated with real medical datasets that our method resembles the centralized training model (based on combined datasets) in terms of accuracy and phenotypes discovery while respecting privacy. PMID:29071165

Factors Contributing to Teachers' Use of Computer Technology in the Classroom

ERIC Educational Resources Information Center

Gilakjani, Abbas Pourhosein

2013-01-01

There are many factors for teachers to use computer technology in their classrooms. The goal of this study is to identify some of the important factors contributing the teachers' use of computer technology. The first goal of this paper is to discuss computer self-efficacy. The second goal is to explain teaching experience. The third goal is to…

Factor selection for service quality evaluation: a hospital case study.

PubMed

Ameryoun, Ahmad; Najafi, Seyedvahid; Nejati-Zarnaqi, Bayram; Khalilifar, Seyed Omid; Ajam, Mahdi; Ansarimoghadam, Ahmad

2017-02-13

Purpose The purpose of this paper is to develop a systematic approach to predict service quality dimension's influence on service quality using a novel analysis based on data envelopment and SERVQUAL. Design/methodology/approach To assess hospital service quality in Tehran, expectation and perception of those who received the services were evaluated using SERVQUAL. The hospital service quality dimensions were found by exploratory factor analysis (EFA). To compare customer expectation and perception, perceived service quality index (PSQI) was measured using a new method based on common weights. A novel sensitivity approach was used to test the service quality factor's impact on the PSQI. Findings A new service quality dimension named "trust in services" was found using EFA, which is not an original SERVQUAL factor. The approach was applied to assess the hospital's service quality. Since the PSQI value was 0.76 it showed that improvements are needed to meet customer expectations. The results showed the factor order that affect PSQI. "Trust in services" has the strongest influence on PSQI followed by "tangibles," "assurance," "empathy," and "responsiveness," respectively. Practical implications This work gives managers insight into service quality by following a systematic method; i.e., measuring perceived service quality from the customer viewpoint and service factors' impact on customer perception. Originality/value The procedure helps managers to select the required service quality dimensions which need improvement and predict their effects on customer perception.

The Quality of Talk in Children's Joint Activity at the Computer.

ERIC Educational Resources Information Center

Mercer, Neil

1994-01-01

Describes findings of the Spoken Language and New Technology (SLANT) research project which studied the talk of primary school children in the United Kingdom who were working in small groups at computers with various kinds of software. Improvements in the quality of talk and collaboration during computer-based activities are suggested. (Contains…

Prevalence of complaints of arm, neck and shoulder among computer office workers and psychometric evaluation of a risk factor questionnaire.

PubMed

Eltayeb, Shahla; Staal, J Bart; Kennes, Janneke; Lamberts, Petra H G; de Bie, Rob A

2007-07-14

Complaints of Arm Neck and Shoulder (CANS) represent a wide range of complaints, which can differ in severity from mild, periodic symptoms to severe, chronic and debilitating conditions. They are thought to be associated with both physical and psychosocial risk factors. The measurement and identification of the various risk factors for these complaints is an important step towards recognizing (a) high risk subgroups that are relevant in profiling CANS; and (b) also for developing targeted and effective intervention plans for treatment. The purpose of the present study was to investigate the prevalence of CANS in a Dutch population of computer workers and to develop a questionnaire aimed at measuring workplace physical and psychosocial risk factors for the presence of these complaints. To examine potential workplace risk factors for the presence of CANS, the Maastricht Upper Extremity Questionnaire (MUEQ), a structured questionnaire, was developed and tested among 264 computer office workers of a branch office of the national social security institution in the Netherlands. The MUEQ holds 95 items covering demographic characteristics, in addition to seven main domains assessing potential risk factors with regard to (1) work station, (2) posture during work, (3) quality of break time, (4) job demands, (5) job control, and (6) social support. The MUEQ further contained some additional questions about the quality of the work environment and the presence of complaints in the neck, shoulder, upper and lower arm, elbow, hand and wrist. The prevalence rates of CANS in the past year were computed. Further, we investigated the psychometric properties of the MUEQ (i.e. factor structure and reliability). The one-year prevalence rate of CANS indicated that 54% of the respondents reported at least one complaint in the arm, neck and/or shoulder. The highest prevalence rates were found for neck and shoulder symptoms (33% and 31% respectively), followed by hand and upper arm

A Structure for Creating Quality Software.

ERIC Educational Resources Information Center

Christensen, Larry C.; Bodey, Michael R.

1990-01-01

Addresses the issue of assuring quality software for use in computer-aided instruction and presents a structure by which developers can create quality courseware. Differences between courseware and computer-aided instruction software are discussed, methods for testing software are described, and human factors issues as well as instructional design…

Computer Use and Factors Related to Computer Use in Large Independent Secondary School Libraries.

ERIC Educational Resources Information Center

Currier, Heidi F.

Survey results about the use of computers in independent secondary school libraries are reported, and factors related to the presence of computers are identified. Data are from 104 librarians responding to a questionnaire sent to a sample of 136 large (over 400 students) independent secondary schools. Data are analyzed descriptively to show the…

Estimation of gas hydrate saturation using isotropic and anisotropic models at the location selected after measurement of seismic quality factor

NASA Astrophysics Data System (ADS)

Mundhra, A.; Sain, K.; Shankar, U.

2012-12-01

The Indian National Gas Hydrate Program Expedition (NGHP) 01 discovered gas hydrate in unconsolidated sediments at several drilling sites along the continental margins of Krishna-Godavari Basin, India. Presence of gas hydrate reduces the attenuation of travelling seismic waves which can be measured by estimation of seismic quality factor (Dasgupta and Clark, 1998). Here, we use log spectral ratio method (Sain et al, 2009) to compute quality factor at three locations, among which two have strong and one has no bottom simulating reflector (BSR), along seismic cross-line near one of the drilling site. Interval quality factor for three submarine sedimentary layers bounded by seafloor, BSR, one reflector above and another reflector below the BSR has been measured. To compute quality factor, unprocessed pre-stack seismic data has been used to avoid any influence of processing sequence. We have estimated that interval quality factor lies within 200-220 in the interval having BSR while it varies within 90-100 in other intervals. Thereby, high interval quality factor ascertains that observed BSR is due to presence of gas hydrates. We have performed rock physics modelling by using isotropic and anisotropic models, to quantitatively estimate gas hydrate saturation at one of the location where an interval has high quality factor. Abruptly high measured resistivity and high P-wave velocity in the interval, leads to towering hydrate saturation (Archie,1942 and Helegrud et al, 1999) in comparison to lower gas hydrate saturations estimated by pressure core and chlorinity measurements. Overestimation of saturation is attributed to presence of near vertical fractures that are identified from logging-while-drilling resistivity images. We have carried out anisotropic modeling (Kennedy and Herrick, 2004 and Lee,2009) by incorporating fracture volume and fracture porosity to estimate hydrate saturation and have observed that modeled gas hydrate saturations agree with the lower gas

Analysis of psychological factors for quality assessment of interactive multimodal service

NASA Astrophysics Data System (ADS)

Yamagishi, Kazuhisa; Hayashi, Takanori

2005-03-01

We proposed a subjective quality assessment model for interactive multimodal services. First, psychological factors of an audiovisual communication service were extracted by using the semantic differential (SD) technique and factor analysis. Forty subjects participated in subjective tests and performed point-to-point conversational tasks on a PC-based TV phone that exhibits various network qualities. The subjects assessed those qualities on the basis of 25 pairs of adjectives. Two psychological factors, i.e., an aesthetic feeling and a feeling of activity, were extracted from the results. Then, quality impairment factors affecting these two psychological factors were analyzed. We found that the aesthetic feeling is mainly affected by IP packet loss and video coding bit rate, and the feeling of activity depends on delay time and video frame rate. We then proposed an opinion model derived from the relationships among quality impairment factors, psychological factors, and overall quality. The results indicated that the estimation error of the proposed model is almost equivalent to the statistical reliability of the subjective score. Finally, using the proposed model, we discuss guidelines for quality design of interactive audiovisual communication services.

Factors influencing microinjection molding replication quality

NASA Astrophysics Data System (ADS)

Vera, Julie; Brulez, Anne-Catherine; Contraires, Elise; Larochette, Mathieu; Trannoy-Orban, Nathalie; Pignon, Maxime; Mauclair, Cyril; Valette, Stéphane; Benayoun, Stéphane

2018-01-01

In recent years, there has been increased interest in producing and providing high-precision plastic parts that can be manufactured by microinjection molding: gears, pumps, optical grating elements, and so on. For all of these applications, the replication quality is essential. This study has two goals: (1) fabrication of high-precision parts using the conventional injection molding machine; (2) identification of robust parameters that ensure production quality. Thus, different technological solutions have been used: cavity vacuuming and the use of a mold coated with DLC or CrN deposits. AFM and SEM analyses were carried out to characterize the replication profile. The replication quality was studied in terms of the process parameters, coated and uncoated molds and crystallinity of the polymer. Specific studies were processed to quantify the replicability of injection molded parts (ABS, PC and PP). Analysis of the Taguchi experimental designs permits prioritization of the impact of each parameter on the replication quality. A discussion taking into account these new parameters and the thermal and spreading properties on the coatings is proposed. It appeared that, in general, increasing the mold temperature improves the molten polymer fill in submicron features except for the steel insert (for which the presence of a vacuum is the most important factor). Moreover, the DLC coating was the best coating to increase the quality of the replication. This result could be explained by the lower thermal diffusivity of this coating. We noted that the viscosity of the polymers is not a primordial factor of the replication quality.

High quality factor, fully switchable terahertz superconducting metasurface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scalari, G., E-mail: scalari@phys.ethz.ch; Maissen, C.; Faist, J.

2014-12-29

We present a complementary THz metasurface realised with Niobium thin film which displays a quality factor Q = 54 and a fully switchable behaviour as a function of the temperature. The switching behaviour and the high quality factor are due to a careful design of the metasurface aimed at maximising the ohmic losses when the Nb is above the critical temperature and minimising the radiative coupling. The superconductor allows the operation of the cavity with high Q and the use of inductive elements with a high aspect ratio. Comparison with three dimensional finite element simulations highlights the crucial role of the inductivemore » elements and of the kinetic inductance of the Cooper pairs in achieving the high quality factor and the high field enhancement.« less

The Impact of Soft Factors on Quality Improvement in Manufacturing Industry

NASA Astrophysics Data System (ADS)

Chan, Shiau Wei; Fauzi Ahmad, Md; Kong, Mei Wan

2017-08-01

Nowadays, soft factors have become the key factors of success in quality improvement of an organisation. Many organisations have neglected the importance of soft factors, this may influence the organisational performance. Hence, the purpose of this research is to examine the impact of soft factors on quality improvement in manufacturing industries. Six hypotheses were examined while considering six dimensions of soft factors including management commitment, customer focus, supplier relationship, employee involvement, training and education, and reward and recognition that have a positive impact on quality improvement. In this study, eighty one managers from the quality department were randomly selected in the manufacturing industry in Batu Pahat, Johor. The questionnaires were distributed to them. The researcher analysed the quantitatively collected data using descriptive analysis and correlation analysis. The findings of this study revealed that all soft factors are correlated to the quality improvement in an organisation with a high significant value but the regression analysis shows that the supplier relationship and employee involvement has more significant impact on quality improvement as compared to other soft factors which contributes of this study.

Establishing a Cloud Computing Success Model for Hospitals in Taiwan.

PubMed

Lian, Jiunn-Woei

2017-01-01

The purpose of this study is to understand the critical quality-related factors that affect cloud computing success of hospitals in Taiwan. In this study, private cloud computing is the major research target. The chief information officers participated in a questionnaire survey. The results indicate that the integration of trust into the information systems success model will have acceptable explanatory power to understand cloud computing success in the hospital. Moreover, information quality and system quality directly affect cloud computing satisfaction, whereas service quality indirectly affects the satisfaction through trust. In other words, trust serves as the mediator between service quality and satisfaction. This cloud computing success model will help hospitals evaluate or achieve success after adopting private cloud computing health care services.

Establishing a Cloud Computing Success Model for Hospitals in Taiwan

PubMed Central

Lian, Jiunn-Woei

2017-01-01

The purpose of this study is to understand the critical quality-related factors that affect cloud computing success of hospitals in Taiwan. In this study, private cloud computing is the major research target. The chief information officers participated in a questionnaire survey. The results indicate that the integration of trust into the information systems success model will have acceptable explanatory power to understand cloud computing success in the hospital. Moreover, information quality and system quality directly affect cloud computing satisfaction, whereas service quality indirectly affects the satisfaction through trust. In other words, trust serves as the mediator between service quality and satisfaction. This cloud computing success model will help hospitals evaluate or achieve success after adopting private cloud computing health care services. PMID:28112020

Molecular factor computing for predictive spectroscopy.

PubMed

Dai, Bin; Urbas, Aaron; Douglas, Craig C; Lodder, Robert A

2007-08-01

The concept of molecular factor computing (MFC)-based predictive spectroscopy was demonstrated here with quantitative analysis of ethanol-in-water mixtures in a MFC-based prototype instrument. Molecular computing of vectors for transformation matrices enabled spectra to be represented in a desired coordinate system. New coordinate systems were selected to reduce the dimensionality of the spectral hyperspace and simplify the mechanical/electrical/computational construction of a new MFC spectrometer employing transmission MFC filters. A library search algorithm was developed to calculate the chemical constituents of the MFC filters. The prototype instrument was used to collect data from 39 ethanol-in-water mixtures (range 0-14%). For each sample, four different voltage outputs from the detector (forming two factor scores) were measured by using four different MFC filters. Twenty samples were used to calibrate the instrument and build a multivariate linear regression prediction model, and the remaining samples were used to validate the predictive ability of the model. In engineering simulations, four MFC filters gave an adequate calibration model (r2 = 0.995, RMSEC = 0.229%, RMSECV = 0.339%, p = 0.05 by f test). This result is slightly better than a corresponding PCR calibration model based on corrected transmission spectra (r2 = 0.993, RMSEC = 0.359%, RMSECV = 0.551%, p = 0.05 by f test). The first actual MFC prototype gave an RMSECV = 0.735%. MFC was a viable alternative to conventional spectrometry with the potential to be more simply implemented and more rapid and accurate.

Cosmic Reionization On Computers III. The Clumping Factor

DOE PAGES

Kaurov, Alexander A.; Gnedin, Nickolay Y.

2015-09-09

We use fully self-consistent numerical simulations of cosmic reionization, completed under the Cosmic Reionization On Computers project, to explore how well the recombinations in the ionized intergalactic medium (IGM) can be quantified by the effective "clumping factor." The density distribution in the simulations (and, presumably, in a real universe) is highly inhomogeneous and more-or-less smoothly varying in space. However, even in highly complex and dynamic environments, the concept of the IGM remains reasonably well-defined; the largest ambiguity comes from the unvirialized regions around galaxies that are over-ionized by the local enhancement in the radiation field ("proximity zones"). This ambiguity precludesmore » computing the IGM clumping factor to better than about 20%. Furthermore, we discuss a "local clumping factor," defined over a particular spatial scale, and quantify its scatter on a given scale and its variation as a function of scale.« less

Cosmic Reionization On Computers III. The Clumping Factor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kaurov, Alexander A.; Gnedin, Nickolay Y.

We use fully self-consistent numerical simulations of cosmic reionization, completed under the Cosmic Reionization On Computers project, to explore how well the recombinations in the ionized intergalactic medium (IGM) can be quantified by the effective "clumping factor." The density distribution in the simulations (and, presumably, in a real universe) is highly inhomogeneous and more-or-less smoothly varying in space. However, even in highly complex and dynamic environments, the concept of the IGM remains reasonably well-defined; the largest ambiguity comes from the unvirialized regions around galaxies that are over-ionized by the local enhancement in the radiation field ("proximity zones"). This ambiguity precludesmore » computing the IGM clumping factor to better than about 20%. Furthermore, we discuss a "local clumping factor," defined over a particular spatial scale, and quantify its scatter on a given scale and its variation as a function of scale.« less

Building-In Quality Rather than Assessing Quality Afterwards: A Technological Solution to Ensuring Computational Accuracy in Learning Materials

ERIC Educational Resources Information Center

Dunn, Peter

2008-01-01

Quality encompasses a very broad range of ideas in learning materials, yet the accuracy of the content is often overlooked as a measure of quality. Various aspects of accuracy are briefly considered, and the issue of computational accuracy is then considered further. When learning materials are produced containing the results of mathematical…

Understanding the Institutional-Level Factors of Urban School Quality

ERIC Educational Resources Information Center

Gottfried, Michael A.

2012-01-01

Background/Context: This article addresses which school-level factors contribute to school quality. Previous research has focused on assessing the effects of school-level variables on student-level quality (e.g., achievement). However, the field has been limited in not evaluating the effects of school-level factors directly on measured…

A FRAMEWORK FOR FINE-SCALE COMPUTATIONAL FLUID DYNAMICS AIR QUALITY MODELING AND ANALYSIS

EPA Science Inventory

Fine-scale Computational Fluid Dynamics (CFD) simulation of pollutant concentrations within roadway and building microenvironments is feasible using high performance computing. Unlike currently used regulatory air quality models, fine-scale CFD simulations are able to account rig...

Broken symmetry dielectric resonators for high quality factor Fano metasurfaces

DOE PAGES

Campione, Salvatore; Liu, Sheng; Basilio, Lorena I.; ...

2016-10-25

We present a new approach to dielectric metasurface design that relies on a single resonator per unit cell and produces robust, high quality factor Fano resonances. Our approach utilizes symmetry breaking of highly symmetric resonator geometries, such as cubes, to induce couplings between the otherwise orthogonal resonator modes. In particular, we design perturbations that couple “bright” dipole modes to “dark” dipole modes whose radiative decay is suppressed by local field effects in the array. Our approach is widely scalable from the near-infrared to radio frequencies. We first unravel the Fano resonance behavior through numerical simulations of a germanium resonator-based metasurfacemore » that achieves a quality factor of ~1300 at ~10.8 μm. Then, we present two experimental demonstrations operating in the near-infrared (~1 μm): a silicon-based implementation that achieves a quality factor of ~350; and a gallium arsenide-based structure that achieves a quality factor of ~600, the highest near-infrared quality factor experimentally demonstrated to date with this kind of metasurface. Importantly, large electromagnetic field enhancements appear within the resonators at the Fano resonant frequencies. Here, we envision that combining high quality factor, high field enhancement resonances with nonlinear and active/gain materials such as gallium arsenide will lead to new classes of active optical devices.« less

Broken symmetry dielectric resonators for high quality factor Fano metasurfaces

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campione, Salvatore; Liu, Sheng; Basilio, Lorena I.

We present a new approach to dielectric metasurface design that relies on a single resonator per unit cell and produces robust, high quality factor Fano resonances. Our approach utilizes symmetry breaking of highly symmetric resonator geometries, such as cubes, to induce couplings between the otherwise orthogonal resonator modes. In particular, we design perturbations that couple “bright” dipole modes to “dark” dipole modes whose radiative decay is suppressed by local field effects in the array. Our approach is widely scalable from the near-infrared to radio frequencies. We first unravel the Fano resonance behavior through numerical simulations of a germanium resonator-based metasurfacemore » that achieves a quality factor of ~1300 at ~10.8 μm. Then, we present two experimental demonstrations operating in the near-infrared (~1 μm): a silicon-based implementation that achieves a quality factor of ~350; and a gallium arsenide-based structure that achieves a quality factor of ~600, the highest near-infrared quality factor experimentally demonstrated to date with this kind of metasurface. Importantly, large electromagnetic field enhancements appear within the resonators at the Fano resonant frequencies. Here, we envision that combining high quality factor, high field enhancement resonances with nonlinear and active/gain materials such as gallium arsenide will lead to new classes of active optical devices.« less

High quality factor single-crystal diamond mechanical resonators

NASA Astrophysics Data System (ADS)

Ovartchaiyapong, P.; Pascal, L. M. A.; Myers, B. A.; Lauria, P.; Bleszynski Jayich, A. C.

2012-10-01

Single-crystal diamond is a promising material for microelectromechanical systems (MEMs) because of its low mechanical loss, compatibility with extreme environments, and built-in interface to high-quality spin centers. But its use has been limited by challenges in processing and growth. We demonstrate a wafer bonding-based technique to form diamond on insulator, from which we make single-crystal diamond micromechanical resonators with mechanical quality factors as high as 338 000 at room temperature. Variable temperature measurements down to 10 K reveal a nonmonotonic dependence of quality factor on temperature. These resonators enable integration of single-crystal diamond into MEMs technology for classical and quantum applications.

Computing row and column counts for sparse QR and LU factorization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilbert, John R.; Li, Xiaoye S.; Ng, Esmond G.

2001-01-01

We present algorithms to determine the number of nonzeros in each row and column of the factors of a sparse matrix, for both the QR factorization and the LU factorization with partial pivoting. The algorithms use only the nonzero structure of the input matrix, and run in time nearly linear in the number of nonzeros in that matrix. They may be used to set up data structures or schedule parallel operations in advance of the numerical factorization. The row and column counts we compute are upper bounds on the actual counts. If the input matrix is strong Hall and theremore » is no coincidental numerical cancellation, the counts are exact for QR factorization and are the tightest bounds possible for LU factorization. These algorithms are based on our earlier work on computing row and column counts for sparse Cholesky factorization, plus an efficient method to compute the column elimination tree of a sparse matrix without explicitly forming the product of the matrix and its transpose.« less

Factors Associated with Sleep Quality in Maxillectomy Patients.

PubMed

Li, Na; Otomaru, Takafumi; Said, Mohamed Moustafa; Kanazaki, Ayako; Yeerken, Yesiboli; Taniguchi, Hisashi

To investigate factors affecting sleep quality in maxillectomy patients after prosthetic rehabilitation and to determine the association between defect status and sleep quality. A total of 57 patients participated in this study. Sleep quality, general health, and oral health-related quality of life (OHRQoL) were evaluated. Of the total sample, 89% had poor sleep quality. Early morning awakening and daytime sleepiness were the most common complaints. Defect status and the extent of neck dissection could affect sleep quality in these patients. Improvement of OHRQoL in patients with dentomaxillary prostheses may help improve sleep.

Computer Self-Efficacy and Factors Influencing E-Learning Effectiveness

ERIC Educational Resources Information Center

Chien, Tien-Chen

2012-01-01

Purpose: The purpose of this study is to investigate the influences of system and instructor factors on e-learning effectiveness under the interactions of computer self-efficacy. In this study, the factors of the e-learning system are functionality, interaction, and response. The factors of the e-learning instructor are attitude, technical skills,…

Image quality in low-dose coronary computed tomography angiography with a new high-definition CT scanner.

PubMed

Kazakauskaite, Egle; Husmann, Lars; Stehli, Julia; Fuchs, Tobias; Fiechter, Michael; Klaeser, Bernd; Ghadri, Jelena R; Gebhard, Catherine; Gaemperli, Oliver; Kaufmann, Philipp A

2013-02-01

A new generation of high definition computed tomography (HDCT) 64-slice devices complemented by a new iterative image reconstruction algorithm-adaptive statistical iterative reconstruction, offer substantially higher resolution compared to standard definition CT (SDCT) scanners. As high resolution confers higher noise we have compared image quality and radiation dose of coronary computed tomography angiography (CCTA) from HDCT versus SDCT. Consecutive patients (n = 93) underwent HDCT, and were compared to 93 patients who had previously undergone CCTA with SDCT matched for heart rate (HR), HR variability and body mass index (BMI). Tube voltage and current were adapted to the patient's BMI, using identical protocols in both groups. The image quality of all CCTA scans was evaluated by two independent readers in all coronary segments using a 4-point scale (1, excellent image quality; 2, blurring of the vessel wall; 3, image with artefacts but evaluative; 4, non-evaluative). Effective radiation dose was calculated from DLP multiplied by a conversion factor (0.014 mSv/mGy × cm). The mean image quality score from HDCT versus SDCT was comparable (2.02 ± 0.68 vs. 2.00 ± 0.76). Mean effective radiation dose did not significantly differ between HDCT (1.7 ± 0.6 mSv, range 1.0-3.7 mSv) and SDCT (1.9 ± 0.8 mSv, range 0.8-5.5 mSv; P = n.s.). HDCT scanners allow low-dose 64-slice CCTA scanning with higher resolution than SDCT but maintained image quality and equally low radiation dose. Whether this will translate into higher accuracy of HDCT for CAD detection remains to be evaluated.

Quality assurance for respiratory care services: a computer-assisted program.

PubMed

Elliott, C G

1993-01-01

At present, the principal advantage of computer-assisted quality assurance is the acquisition of quality assurance date without resource-consuming chart reviews. A surveillance program like the medical director's alert may reduce morbidity and mortality. Previous research suggests that inadequate oxygen therapy or failures in airway management are important causes of preventable deaths in hospitals. Furthermore, preventable deaths tend to occur among patients who have lower severity-of-illness scores and who are not in ICUs. Thus, surveillance of the entire hospital, as performed by the HIS medical director's alert, may significantly impact hospital mortality related to respiratory care. Future research should critically examine the potential of such computerized systems to favorably change the morbidity and mortality of hospitalized patients. The departments of respiratory care and medical informatics at LDS Hospital have developed a computer-assisted approach to quality assurance monitoring of respiratory care services. This system provides frequent and consistent samples of a variety of respiratory care data. The immediate needs of patients are addressed through a daily surveillance system (medical director's alert). The departmental quality assurance program utilizes a separate program that monitors clinical indicators of staff performance in terms of stated departmental policies and procedures (rate-based clinical indicators). The availability of an integrated patient database allows these functions to be performed without labor-intensive chart audits.

Factors associated with health-related quality of life among operating engineers.

PubMed

Choi, Seung Hee; Redman, Richard W; Terrell, Jeffrey E; Pohl, Joanne M; Duffy, Sonia A

2012-11-01

Because health-related quality of life among blue-collar workers has not been well studied, the purpose of this study was to determine factors associated with health-related quality of life among Operating Engineers. With cross-sectional data from a convenience sample of 498 Operating Engineers, personal and health behavioral factors associated with health-related quality of life were examined. Multivariate linear regression analysis revealed that personal factors (older age, being married, more medical comorbidities, and depression) and behavioral factors (smoking, low fruit and vegetable intake, low physical activity, high body mass index, and low sleep quality) were associated with poor health-related quality of life. Operating Engineers are at risk for poor health-related quality of life. Underlying medical comorbidities and depression should be well managed. Worksite wellness programs addressing poor health behaviors may be beneficial.

COSMIC REIONIZATION ON COMPUTERS. III. THE CLUMPING FACTOR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kaurov, Alexander A.; Gnedin, Nickolay Y., E-mail: kaurov@uchicago.edu, E-mail: gnedin@fnal.gov

We use fully self-consistent numerical simulations of cosmic reionization, completed under the Cosmic Reionization On Computers project, to explore how well the recombinations in the ionized intergalactic medium (IGM) can be quantified by the effective “clumping factor.” The density distribution in the simulations (and, presumably, in a real universe) is highly inhomogeneous and more-or-less smoothly varying in space. However, even in highly complex and dynamic environments, the concept of the IGM remains reasonably well-defined; the largest ambiguity comes from the unvirialized regions around galaxies that are over-ionized by the local enhancement in the radiation field (“proximity zones”). That ambiguity precludesmore » computing the IGM clumping factor to better than about 20%. We also discuss a “local clumping factor,” defined over a particular spatial scale, and quantify its scatter on a given scale and its variation as a function of scale.« less

Training, Quality Assurance Factors, and Tools Investigation: a Work Report and Suggestions on Software Quality Assurance

NASA Technical Reports Server (NTRS)

Lee, Pen-Nan

1991-01-01

Previously, several research tasks have been conducted, some observations were obtained, and several possible suggestions have been contemplated involving software quality assurance engineering at NASA Johnson. These research tasks are briefly described. Also, a brief discussion is given on the role of software quality assurance in software engineering along with some observations and suggestions. A brief discussion on a training program for software quality assurance engineers is provided. A list of assurance factors as well as quality factors are also included. Finally, a process model which can be used for searching and collecting software quality assurance tools is presented.

Factors Influencing the Adoption of Cloud Computing by Decision Making Managers

ERIC Educational Resources Information Center

Ross, Virginia Watson

2010-01-01

Cloud computing is a growing field, addressing the market need for access to computing resources to meet organizational computing requirements. The purpose of this research is to evaluate the factors that influence an organization in their decision whether to adopt cloud computing as a part of their strategic information technology planning.…

Shor's factoring algorithm and modern cryptography. An illustration of the capabilities inherent in quantum computers

NASA Astrophysics Data System (ADS)

Gerjuoy, Edward

2005-06-01

The security of messages encoded via the widely used RSA public key encryption system rests on the enormous computational effort required to find the prime factors of a large number N using classical (conventional) computers. In 1994 Peter Shor showed that for sufficiently large N, a quantum computer could perform the factoring with much less computational effort. This paper endeavors to explain, in a fashion comprehensible to the nonexpert, the RSA encryption protocol; the various quantum computer manipulations constituting the Shor algorithm; how the Shor algorithm performs the factoring; and the precise sense in which a quantum computer employing Shor's algorithm can be said to accomplish the factoring of very large numbers with less computational effort than a classical computer. It is made apparent that factoring N generally requires many successive runs of the algorithm. Our analysis reveals that the probability of achieving a successful factorization on a single run is about twice as large as commonly quoted in the literature.

Medical education as a science: the quality of evidence for computer-assisted instruction.

PubMed

Letterie, Gerard S

2003-03-01

A marked increase in the number of computer programs for computer-assisted instruction in the medical sciences has occurred over the past 10 years. The quality of both the programs and the literature that describe these programs has varied considerably. The purposes of this study were to evaluate the published literature that described computer-assisted instruction in medical education and to assess the quality of evidence for its implementation, with particular emphasis on obstetrics and gynecology. Reports published between 1988 and 2000 on computer-assisted instruction in medical education were identified through a search of MEDLINE and Educational Resource Identification Center and a review of the bibliographies of the articles that were identified. Studies were selected if they included a description of computer-assisted instruction in medical education, regardless of the type of computer program. Data were extracted with a content analysis of 210 reports. The reports were categorized according to study design (comparative, prospective, descriptive, review, or editorial), type of computer-assisted instruction, medical specialty, and measures of effectiveness. Computer-assisted instruction programs included online technologies, CD-ROMs, video laser disks, multimedia work stations, virtual reality, and simulation testing. Studies were identified in all medical specialties, with a preponderance in internal medicine, general surgery, radiology, obstetrics and gynecology, pediatrics, and pathology. Ninety-six percent of the articles described a favorable impact of computer-assisted instruction in medical education, regardless of the quality of the evidence. Of the 210 reports that were identified, 60% were noncomparative, descriptive reports of new techniques in computer-assisted instruction, and 15% and 14% were reviews and editorials, respectively, of existing technology. Eleven percent of studies were comparative and included some form of assessment of the

The relationship between psychosocial work factors, work stress and computer-related musculoskeletal discomforts among computer users in Malaysia.

PubMed

Zakerian, Seyed Abolfazl; Subramaniam, Indra Devi

2009-01-01

Increasing numbers of workers use computer for work. So, especially among office workers, there is a high risk of musculoskeletal discomforts. This study examined the associations among 3 factors, psychosocial work factors, work stress and musculoskeletal discomforts. These associations were examined via a questionnaire survey on 30 office workers (at a university in Malaysia), whose jobs required an extensive use of computers. The questionnaire was distributed and collected daily for 20 days. While the results indicated a significant relationship among psychosocial work factors, work stress and musculoskeletal discomfort, 3 psychosocial work factors were found to be more important than others in both work stress and musculoskeletal discomfort: job demands, negative social interaction and computer-related problems. To further develop study design, it is necessary to investigate industrial and other workers who have experienced musculoskeletal discomforts and work stress.

Realization of high quality production schedules: Structuring quality factors via iteration of user specification processes

NASA Technical Reports Server (NTRS)

Hamazaki, Takashi

1992-01-01

This paper describes an architecture for realizing high quality production schedules. Although quality is one of the most important aspects of production scheduling, it is difficult, even for a user, to specify precisely. However, it is also true that the decision as to whether a scheduler is good or bad can only be made by the user. This paper proposes the following: (1) the quality of a schedule can be represented in the form of quality factors, i.e. constraints and objectives of the domain, and their structure; (2) quality factors and their structure can be used for decision making at local decision points during the scheduling process; and (3) that they can be defined via iteration of user specification processes.

WQEP - a computer spreadsheet program to evaluate water quality data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liddle, R.G.

1996-12-31

A flexible spreadsheet Water Quality Evaluation Program (WQEP) has been developed for mining companies, consultants, and regulators to interpret the results of water quality sampling. In order properly to evaluate hydrologic data, unit conversions and chemical calculations are done, quality control checks are needed, and a complete and up-to-date listing of water quality standards is necessary. This process is time consuming and tends not to be done for every sample. This program speeds the process by allowing the input of up to 115 chemical parameters from one sample. WQEP compares concentrations with EPA primary and secondary drinking water MCLs ormore » MCLG, EPA warmwater and Coldwater acute and chronic aquatic life criteria, irrigation criteria, livestock criteria, EPA human health criteria, and several other categories of criteria. The spreadsheet allows the input of State or local water standards of interest. Water quality checks include: anion/cations, TDS{sub m}/TDS{sub c} (where m=measured and c=calculated), EC{sub m}/EC{sub c}, EC{sub m}/ion sums, TDS{sub c}/EC ratio, TDS{sub m}/EC, EC vs. alkalinity, two hardness values, and EC vs. {Sigma} cations. WQEP computes the dissolved transport index of 23 parameters, computes ratios of 26 species for trend analysis, calculates non-carbonate alkalinity to adjust the bicarbonate concentration, and calculates 35 interpretive formulas (pE, SAR, S.I., unionized ammonia, ionized sulfide HS-, pK{sub x} values, etc.). Fingerprinting is conducted by automatic generation of stiff diagrams and ion histograms. Mass loading calculations, mass balance calculations, conversions of concentrations, ionic strength, and the activity coefficient and chemical activity of 33 parameters is calculated. This program allows a speedy and thorough evaluation of water quality data from metal mines, coal mining, and natural surface water systems and has been tested against hand calculations.« less

Perceptual factors that influence use of computer enhanced visual displays

NASA Technical Reports Server (NTRS)

Littman, David; Boehm-Davis, Debbie

1993-01-01

This document is the final report for the NASA/Langley contract entitled 'Perceptual Factors that Influence Use of Computer Enhanced Visual Displays.' The document consists of two parts. The first part contains a discussion of the problem to which the grant was addressed, a brief discussion of work performed under the grant, and several issues suggested for follow-on work. The second part, presented as Appendix I, contains the annual report produced by Dr. Ann Fulop, the Postdoctoral Research Associate who worked on-site in this project. The main focus of this project was to investigate perceptual factors that might affect a pilot's ability to use computer generated information that is projected into the same visual space that contains information about real world objects. For example, computer generated visual information can identify the type of an attacking aircraft, or its likely trajectory. Such computer generated information must not be so bright that it adversely affects a pilot's ability to perceive other potential threats in the same volume of space. Or, perceptual attributes of computer generated and real display components should not contradict each other in ways that lead to problems of accommodation and, thus, distance judgments. The purpose of the research carried out under this contract was to begin to explore the perceptual factors that contribute to effective use of these displays.

Factors Affecting Sleep Quality of Patients in Intensive Care Unit

PubMed Central

Bihari, Shailesh; Doug McEvoy, R.; Matheson, Elisha; Kim, Susan; Woodman, Richard J.; Bersten, Andrew D.

2012-01-01

Introduction: Sleep disturbance is a frequently overlooked complication of intensive care unit (ICU) stay. Aim: To evaluate sleep quality among patients admitted to ICU and investigate environmental and non-environmental factors that affect sleep quality in ICU. Methods: Over a 22-month period, we consecutively recruited patients who spent ≥ 2 nights post-endotracheal extubation in ICU and who were orientated to time, place, and person on the day of discharge. Self-reported sleep quality, according to a modified Freedman questionnaire, which provided data on self-reported ICU sleep quality in ICU and environmental factors affecting sleep quality in the ICU, were collected. We also investigated non-environmental factors, such as severity of illness, ICU interventions, and medications that can affect sleep quality. Results: Fifty males and 50 females were recruited with a mean (± SD) age of 65.1 ± 15.2 years. APACHE II score at admission to ICU was 18.1 ± 7.5 with duration of stay 6.7 ± 6.5days. Self-reported sleep quality score at home (1 = worst; 10 = best) was 7.0 ± 2.2; this decreased to 4.0 ± 1.7 during their stay in ICU (p < 0.001). In multivariate analysis with APACHE III as severity of illness (R2 = 0.25), factors [exp(b)(95% CI), p value] which significantly affected sleep in ICU were sex [0.37(0.19-0.72), p < 0.01], age and sex interaction [1.02(1.01-1.03), p < 0.01], bedside phone [0.92(0.87-0.97), p < 0.01], prior quality of sleep at home [1.30(1.05-1.62), p = 0.02], and use of steroids [0.82(0.69-0.98), p = 0.03] during the stay in ICU. Conclusion: Reduced sleep quality is a common problem in ICU with a multifactorial etiology. Citation: Bihari S; McEvoy RD; Kim S; Woodman RJ; Bersten AD. Factors affecting sleep quality of patients in intensive care unit. J Clin Sleep Med 2012;8(3):301-307. PMID:22701388

Sensory quality evaluation for appearance of needle-shaped green tea based on computer vision and nonlinear tools*

PubMed Central

Dong, Chun-wang; Zhu, Hong-kai; Zhao, Jie-wen; Jiang, Yong-wen; Yuan, Hai-bo; Chen, Quan-sheng

2017-01-01

Tea is one of the three greatest beverages in the world. In China, green tea has the largest consumption, and needle-shaped green tea, such as Maofeng tea and Sparrow Tongue tea, accounts for more than 40% of green tea (Zhu et al., 2017). The appearance of green tea is one of the important indexes during the evaluation of green tea quality. Especially in market transactions, the price of tea is usually determined by its appearance (Zhou et al., 2012). Human sensory evaluation is usually conducted by experts, and is also easily affected by various factors such as light, experience, psychological and visual factors. In the meantime, people may distinguish the slight differences between similar colors or textures, but the specific levels of the tea are hard to determine (Chen et al., 2008). As human description of color and texture is qualitative, it is hard to evaluate the sensory quality accurately, in a standard manner, and objectively. Color is an important visual property of a computer image (Xie et al., 2014; Khulal et al., 2016); texture is a visual performance of image grayscale and color changing with spatial positions, which can be used to describe the roughness and directivity of the surface of an object (Sanaeifar et al., 2016). There are already researchers who have used computer visual image technologies to identify the varieties, levels, and origins of tea (Chen et al., 2008; Xie et al., 2014; Zhu et al., 2017). Most of their research targets are crush, tear, and curl (CTC) red (green) broken tea, curly green tea (Bilochun tea), and flat-typed green tea (West Lake Dragon-well green tea) as the information sources. However, the target of the above research is to establish a qualitative evaluation method on tea quality (Fu et al., 2013). There is little literature on the sensory evaluation of the appearance quality of needle-shaped green tea, especially research on a quantitative evaluation model (Zhou et al., 2012; Zhu et al., 2017). PMID:28585431

Sensory quality evaluation for appearance of needle-shaped green tea based on computer vision and nonlinear tools.

PubMed

Dong, Chun-Wang; Zhu, Hong-Kai; Zhao, Jie-Wen; Jiang, Yong-Wen; Yuan, Hai-Bo; Chen, Quan-Sheng

2017-06-01

Tea is one of the three greatest beverages in the world. In China, green tea has the largest consumption, and needle-shaped green tea, such as Maofeng tea and Sparrow Tongue tea, accounts for more than 40% of green tea (Zhu et al., 2017). The appearance of green tea is one of the important indexes during the evaluation of green tea quality. Especially in market transactions, the price of tea is usually determined by its appearance (Zhou et al., 2012). Human sensory evaluation is usually conducted by experts, and is also easily affected by various factors such as light, experience, psychological and visual factors. In the meantime, people may distinguish the slight differences between similar colors or textures, but the specific levels of the tea are hard to determine (Chen et al., 2008). As human description of color and texture is qualitative, it is hard to evaluate the sensory quality accurately, in a standard manner, and objectively. Color is an important visual property of a computer image (Xie et al., 2014; Khulal et al., 2016); texture is a visual performance of image grayscale and color changing with spatial positions, which can be used to describe the roughness and directivity of the surface of an object (Sanaeifar et al., 2016). There are already researchers who have used computer visual image technologies to identify the varieties, levels, and origins of tea (Chen et al., 2008; Xie et al., 2014; Zhu et al., 2017). Most of their research targets are crush, tear, and curl (CTC) red (green) broken tea, curly green tea (Bilochun tea), and flat-typed green tea (West Lake Dragon-well green tea) as the information sources. However, the target of the above research is to establish a qualitative evaluation method on tea quality (Fu et al., 2013). There is little literature on the sensory evaluation of the appearance quality of needle-shaped green tea, especially research on a quantitative evaluation model (Zhou et al., 2012; Zhu et al., 2017).

Preslaughter factors affecting poultry meat quality chapter 2.

USDA-ARS?s Scientific Manuscript database

Poultry meat quality is affected by numerous antemortem factors, in particular those occurring during the last 24 hours that the bird is alive. These short term factors influence carcass yield (live shrink), carcass defects (bruising, broken/dislocated bones), carcass microbiological contamination, ...

Prime factorization using quantum annealing and computational algebraic geometry

NASA Astrophysics Data System (ADS)

Dridi, Raouf; Alghassi, Hedayat

2017-02-01

We investigate prime factorization from two perspectives: quantum annealing and computational algebraic geometry, specifically Gröbner bases. We present a novel autonomous algorithm which combines the two approaches and leads to the factorization of all bi-primes up to just over 200000, the largest number factored to date using a quantum processor. We also explain how Gröbner bases can be used to reduce the degree of Hamiltonians.

Relationship between quality of care and choice of clinical computing system: retrospective analysis of family practice performance under the UK's quality and outcomes framework.

PubMed

Kontopantelis, Evangelos; Buchan, Iain; Reeves, David; Checkland, Kath; Doran, Tim

2013-08-02

To investigate the relationship between performance on the UK Quality and Outcomes Framework pay-for-performance scheme and choice of clinical computer system. Retrospective longitudinal study. Data for 2007-2008 to 2010-2011, extracted from the clinical computer systems of general practices in England. All English practices participating in the pay-for-performance scheme: average 8257 each year, covering over 99% of the English population registered with a general practice. Levels of achievement on 62 quality-of-care indicators, measured as: reported achievement (levels of care after excluding inappropriate patients); population achievement (levels of care for all patients with the relevant condition) and percentage of available quality points attained. Multilevel mixed effects multiple linear regression models were used to identify population, practice and clinical computing system predictors of achievement. Seven clinical computer systems were consistently active in the study period, collectively holding approximately 99% of the market share. Of all population and practice characteristics assessed, choice of clinical computing system was the strongest predictor of performance across all three outcome measures. Differences between systems were greatest for intermediate outcomes indicators (eg, control of cholesterol levels). Under the UK's pay-for-performance scheme, differences in practice performance were associated with the choice of clinical computing system. This raises the question of whether particular system characteristics facilitate higher quality of care, better data recording or both. Inconsistencies across systems need to be understood and addressed, and researchers need to be cautious when generalising findings from samples of providers using a single computing system.

Computer-assisted cognitive remediation therapy: cognition, self-esteem and quality of life in schizophrenia.

PubMed

Garrido, Gemma; Barrios, Maite; Penadés, Rafael; Enríquez, Maria; Garolera, Maite; Aragay, Núria; Pajares, Marta; Vallès, Vicenç; Delgado, Luis; Alberni, Joan; Faixa, Carlota; Vendrell, Josep M

2013-11-01

Quality of life (QoL) is an important outcome in the treatment of schizophrenia. Cognitive deficits have an impact on functional outcomes. Cognitive remediation therapy is emerging as a psychological intervention that targets cognitive impairment, but the effect of computer-assisted cognitive remediation on neuropsychology and social functioning and wellbeing remains unclear. The aim of the current study is to investigate the neurocognitive outcomes of computer-assisted cognitive remediation (CACR) therapy in a sample of schizophrenia patients, and to measure the quality of life and self-esteem as secondary outcomes. Sixty-seven people with schizophrenia were randomly assigned to computer-assisted cognitive remediation or an active control condition. The main outcomes were neuropsychological measures and secondary outcomes (self-esteem and quality of life). Measurements were recorded at baseline and post-treatment. The CACR therapy group improved in speed of processing, working memory and reasoning and problem-solving cognitive domains. QoL and self-esteem measures also showed significant improvements over time in this group. Computer-assisted cognitive remediation therapy for people with schizophrenia achieved improvements in neuropsychological performance and in QoL and self-esteem measurements. © 2013 Elsevier B.V. All rights reserved.

Identifying Key Hospital Service Quality Factors in Online Health Communities

PubMed Central

Jung, Yuchul; Hur, Cinyoung; Jung, Dain

2015-01-01

Background The volume of health-related user-created content, especially hospital-related questions and answers in online health communities, has rapidly increased. Patients and caregivers participate in online community activities to share their experiences, exchange information, and ask about recommended or discredited hospitals. However, there is little research on how to identify hospital service quality automatically from the online communities. In the past, in-depth analysis of hospitals has used random sampling surveys. However, such surveys are becoming impractical owing to the rapidly increasing volume of online data and the diverse analysis requirements of related stakeholders. Objective As a solution for utilizing large-scale health-related information, we propose a novel approach to identify hospital service quality factors and overtime trends automatically from online health communities, especially hospital-related questions and answers. Methods We defined social media–based key quality factors for hospitals. In addition, we developed text mining techniques to detect such factors that frequently occur in online health communities. After detecting these factors that represent qualitative aspects of hospitals, we applied a sentiment analysis to recognize the types of recommendations in messages posted within online health communities. Korea’s two biggest online portals were used to test the effectiveness of detection of social media–based key quality factors for hospitals. Results To evaluate the proposed text mining techniques, we performed manual evaluations on the extraction and classification results, such as hospital name, service quality factors, and recommendation types using a random sample of messages (ie, 5.44% (9450/173,748) of the total messages). Service quality factor detection and hospital name extraction achieved average F1 scores of 91% and 78%, respectively. In terms of recommendation classification, performance (ie, precision) is

Identifying key hospital service quality factors in online health communities.

PubMed

Jung, Yuchul; Hur, Cinyoung; Jung, Dain; Kim, Minki

2015-04-07

The volume of health-related user-created content, especially hospital-related questions and answers in online health communities, has rapidly increased. Patients and caregivers participate in online community activities to share their experiences, exchange information, and ask about recommended or discredited hospitals. However, there is little research on how to identify hospital service quality automatically from the online communities. In the past, in-depth analysis of hospitals has used random sampling surveys. However, such surveys are becoming impractical owing to the rapidly increasing volume of online data and the diverse analysis requirements of related stakeholders. As a solution for utilizing large-scale health-related information, we propose a novel approach to identify hospital service quality factors and overtime trends automatically from online health communities, especially hospital-related questions and answers. We defined social media-based key quality factors for hospitals. In addition, we developed text mining techniques to detect such factors that frequently occur in online health communities. After detecting these factors that represent qualitative aspects of hospitals, we applied a sentiment analysis to recognize the types of recommendations in messages posted within online health communities. Korea's two biggest online portals were used to test the effectiveness of detection of social media-based key quality factors for hospitals. To evaluate the proposed text mining techniques, we performed manual evaluations on the extraction and classification results, such as hospital name, service quality factors, and recommendation types using a random sample of messages (ie, 5.44% (9450/173,748) of the total messages). Service quality factor detection and hospital name extraction achieved average F1 scores of 91% and 78%, respectively. In terms of recommendation classification, performance (ie, precision) is 78% on average. Extraction and

Evaluation of diet quality of the elderly and associated factors.

PubMed

Pinto de Souza Fernandes, Dalila; Duarte, Maria Sônia Lopes; Pessoa, Milene Cristine; Franceschini, Sylvia do Carmo Castro; Ribeiro, Andréia Queiroz

2017-09-01

Observational studies suggest healthy dietary patterns are associated with risk reduction and better control of various chronic diseases. However, few Brazilian studies have focused on evaluating the quality of the elderly diet and its relationship with diseases. This study aimed to estimate the association between diet quality and socioeconomic factors, health and nutrition of the elderly. This is a cross-sectional population-based study whose target population were non-institutionalized elderly residents in the city of Viçosa, Brazil. Anthropometric, socioeconomic, health conditions, lifestyle and food consumption variables were obtained from a semi-structured questionnaire. The quality of the diet was assessed by the revised Healthy Eating Index classified into tertiles, considering the first tertile as "Poor diet quality," the second as 'Intermediate diet quality' and the third as "Better diet quality." To identify factors independently associated with diet quality model, the works used multinomial logistic regression. In the results of the multivariate analysis, the factors independently associated with "better diet quality" included female gender, higher education, history of one to five medical visits in the past year, history of diabetes mellitus, dyslipidemia and the use of polypharmacy. Our results show that most seniors need to improve the quality of their diet and those of male gender with no or little education, and those who do not seek medical services constitute the group that needs attention concerning the measures to improve the quality of their diet. Copyright © 2017 Elsevier B.V. All rights reserved.

The human factors of quality and QA in R D environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hill, S.G.

1990-01-01

Achieving quality is a human activity. It is therefore important to consider the human in the design, development and evaluation of work processes and environments in an effort to enhance human performance and minimize error. It is also important to allow for individual differences when considering human factors issues. Human Factors is the field of study which can provide information on integrating the human into the system. Human factors and quality are related for the customer of R D work, R D personnel who perform the work, and the quality professional who overviews the process of quality in the work.more » 18 refs., 1 fig.« less

Prime factorization using quantum annealing and computational algebraic geometry

PubMed Central

Dridi, Raouf; Alghassi, Hedayat

2017-01-01

We investigate prime factorization from two perspectives: quantum annealing and computational algebraic geometry, specifically Gröbner bases. We present a novel autonomous algorithm which combines the two approaches and leads to the factorization of all bi-primes up to just over 200000, the largest number factored to date using a quantum processor. We also explain how Gröbner bases can be used to reduce the degree of Hamiltonians. PMID:28220854

Eyesight quality and Computer Vision Syndrome.

PubMed

Bogdănici, Camelia Margareta; Săndulache, Diana Elena; Nechita, Corina Andreea

2017-01-01

The aim of the study was to analyze the effects that gadgets have on eyesight quality. A prospective observational study was conducted from January to July 2016, on 60 people who were divided into two groups: Group 1 - 30 middle school pupils with a mean age of 11.9 ± 1.86 and Group 2 - 30 patients evaluated in the Ophthalmology Clinic, "Sf. Spiridon" Hospital, Iași, with a mean age of 21.36 ± 7.16 years. The clinical parameters observed were the following: visual acuity (VA), objective refraction, binocular vision (BV), fusional amplitude (FA), Schirmer's test. A questionnaire was also distributed, which contained 8 questions that highlighted the gadget's impact on the eyesight. The use of different gadgets, such as computer, laptops, mobile phones or other displays become part of our everyday life and people experience a variety of ocular symptoms or vision problems related to these. Computer Vision Syndrome (CVS) represents a group of visual and extraocular symptoms associated with sustained use of visual display terminals. Headache, blurred vision, and ocular congestion are the most frequent manifestations determined by the long time use of gadgets. Mobile phones and laptops are the most frequently used gadgets. People who use gadgets for a long time have a sustained effort for accommodation. A small amount of refractive errors (especially myopic shift) was objectively recorded by various studies on near work. Dry eye syndrome could also be identified, and an improvement of visual comfort could be observed after the instillation of artificial tears drops. Computer Vision Syndrome is still under-diagnosed, and people should be made aware of the bad effects the prolonged use of gadgets has on eyesight.

Relationship between quality of care and choice of clinical computing system: retrospective analysis of family practice performance under the UK's quality and outcomes framework

PubMed Central

Kontopantelis, Evangelos; Buchan, Iain; Reeves, David; Checkland, Kath; Doran, Tim

2013-01-01

Objectives To investigate the relationship between performance on the UK Quality and Outcomes Framework pay-for-performance scheme and choice of clinical computer system. Design Retrospective longitudinal study. Setting Data for 2007–2008 to 2010–2011, extracted from the clinical computer systems of general practices in England. Participants All English practices participating in the pay-for-performance scheme: average 8257 each year, covering over 99% of the English population registered with a general practice. Main outcome measures Levels of achievement on 62 quality-of-care indicators, measured as: reported achievement (levels of care after excluding inappropriate patients); population achievement (levels of care for all patients with the relevant condition) and percentage of available quality points attained. Multilevel mixed effects multiple linear regression models were used to identify population, practice and clinical computing system predictors of achievement. Results Seven clinical computer systems were consistently active in the study period, collectively holding approximately 99% of the market share. Of all population and practice characteristics assessed, choice of clinical computing system was the strongest predictor of performance across all three outcome measures. Differences between systems were greatest for intermediate outcomes indicators (eg, control of cholesterol levels). Conclusions Under the UK's pay-for-performance scheme, differences in practice performance were associated with the choice of clinical computing system. This raises the question of whether particular system characteristics facilitate higher quality of care, better data recording or both. Inconsistencies across systems need to be understood and addressed, and researchers need to be cautious when generalising findings from samples of providers using a single computing system. PMID:23913774

High quality factor indium oxide mechanical microresonators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartolomé, Javier, E-mail: j.bartolome@fis.ucm.es; Cremades, Ana; Piqueras, Javier

2015-11-09

The mechanical resonance behavior of as-grown In{sub 2}O{sub 3} microrods has been studied in this work by in-situ scanning electron microscopy (SEM) electrically induced mechanical oscillations. Indium oxide microrods grown by a vapor–solid method are naturally clamped to an aluminum oxide ceramic substrate, showing a high quality factor due to reduced energy losses during mechanical vibrations. Quality factors of more than 10{sup 5} and minimum detectable forces of the order of 10{sup −16} N/Hz{sup 1/2} demonstrate their potential as mechanical microresonators for real applications. Measurements at low-vacuum using the SEM environmental operation mode were performed to study the effect ofmore » extrinsic damping on the resonators behavior. The damping coefficient has been determined as a function of pressure.« less

Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan. Part 1: ASC software quality engineering practices, Version 2.0.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sturtevant, Judith E.; Heaphy, Robert; Hodges, Ann Louise

2006-09-01

The purpose of the Sandia National Laboratories Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. The plan defines the ASC program software quality practices and provides mappings of these practices to Sandia Corporate Requirements CPR 1.3.2 and 1.3.6 and to a Department of Energy document, ASCI Software Quality Engineering: Goals, Principles, and Guidelines. This document also identifies ASC management and software project teams responsibilities in implementing the software quality practices and in assessing progress towards achieving their software quality goals.

Human factors with nonhumans - Factors that affect computer-task performance

NASA Technical Reports Server (NTRS)

Washburn, David A.

1992-01-01

There are two general strategies that may be employed for 'doing human factors research with nonhuman animals'. First, one may use the methods of traditional human factors investigations to examine the nonhuman animal-to-machine interface. Alternatively, one might use performance by nonhuman animals as a surrogate for or model of performance by a human operator. Each of these approaches is illustrated with data in the present review. Chronic ambient noise was found to have a significant but inconsequential effect on computer-task performance by rhesus monkeys (Macaca mulatta). Additional data supported the generality of findings such as these to humans, showing that rhesus monkeys are appropriate models of human psychomotor performance. It is argued that ultimately the interface between comparative psychology and technology will depend on the coordinated use of both strategies of investigation.

Factors affecting maintenance overlay ride quality : 1996 rideability status.

DOT National Transportation Integrated Search

1997-01-01

In early 1996, the Virginia Transportation Research Council initiated a formal analysis of the factors affecting overlay ride quality. As part of that effort, a statewide, multi-year survey of the ride quality for both new overlays and pavement await...

Models of Dynamic Relations Among Service Activities, System State and Service Quality on Computer and Network Systems

DTIC Science & Technology

2010-01-01

Service quality on computer and network systems has become increasingly important as many conventional service transactions are moved online. Service quality of computer and network services can be measured by the performance of the service process in throughput, delay, and so on. On a computer and network system, competing service requests of users and associated service activities change the state of limited system resources which in turn affects the achieved service ...relations of service activities, system state and service

Comparison of computer models for estimating hydrology and water quality in an agricultural watershed

USDA-ARS?s Scientific Manuscript database

Various computer models, ranging from simple to complex, have been developed to simulate hydrology and water quality from field to watershed scales. However, many users are uncertain about which model to choose when estimating water quantity and quality conditions in a watershed. This study compared...

Factors Affecting School Quality in Florida

ERIC Educational Resources Information Center

Thornton, Barry; Arbogast, Gordon

2014-01-01

This paper examines the factors that are theorized to be determinants of school quality in the 67 counties of Florida from 2000 to 2011. The model constructed for this purpose is comprised of a mix of independent variables that include county educational attainment (number of high school graduates and State University System enrollees) and…

Real-time computer treatment of THz passive device images with the high image quality

NASA Astrophysics Data System (ADS)

Trofimov, Vyacheslav A.; Trofimov, Vladislav V.

2012-06-01

We demonstrate real-time computer code improving significantly the quality of images captured by the passive THz imaging system. The code is not only designed for a THz passive device: it can be applied to any kind of such devices and active THz imaging systems as well. We applied our code for computer processing of images captured by four passive THz imaging devices manufactured by different companies. It should be stressed that computer processing of images produced by different companies requires using the different spatial filters usually. The performance of current version of the computer code is greater than one image per second for a THz image having more than 5000 pixels and 24 bit number representation. Processing of THz single image produces about 20 images simultaneously corresponding to various spatial filters. The computer code allows increasing the number of pixels for processed images without noticeable reduction of image quality. The performance of the computer code can be increased many times using parallel algorithms for processing the image. We develop original spatial filters which allow one to see objects with sizes less than 2 cm. The imagery is produced by passive THz imaging devices which captured the images of objects hidden under opaque clothes. For images with high noise we develop an approach which results in suppression of the noise after using the computer processing and we obtain the good quality image. With the aim of illustrating the efficiency of the developed approach we demonstrate the detection of the liquid explosive, ordinary explosive, knife, pistol, metal plate, CD, ceramics, chocolate and other objects hidden under opaque clothes. The results demonstrate the high efficiency of our approach for the detection of hidden objects and they are a very promising solution for the security problem.

Factors associated with quality of life in patients undergoing coronary angioplasty

PubMed Central

Darvishpour, Azar; Javadi-Pashaki, Nazila; Salari, Arsalan; Sadeghi, Tahere; Taleshan-Nejad, Marayam

2017-01-01

Objective: Percutaneous coronary intervention has been effective in increasing longevity of patients with cardiovascular disease. However, the evidence shows that the quality of life after the intervention is still lower than optimal level. The quality of life can be affected by various factors. The aim of this study is to determine the quality of life and its related factors in patients undergoing coronary angioplasty. Methods: This cross-sectional study was performed on 106 patients undergoing coronary angioplasty during 2015-2016. This study population included all patients who referred to a cardiac clinic in Rasht, Iran, were passed 3 months after their angioplasty. Research samples met the inclusion criteria and were willing to participate to the study, were selected gradually (continually). Research tools were a self-structured questionnaire regarding factors associated with the quality of life and the MacNew quality of life questionnaire. Data were collected through asking patients questions and using patient’s medical records. Data analysis was conducted using descriptive and inferential statistics. Results: The results of multivariate linear regression analysis showed that independent variables of age (P = 0.0001), the number of diseased vessels (P = 0.0001), and the number of comorbidities (P < 0.05) were the most important factors associated with the quality of life. Conclusion: Health-care professionals can play an effective role in promoting the quality of life of patients undergoing coronary angioplasty by modifying lifestyle based on the related factors and to provide comprehensive care programs, especially for elderly. PMID:29085266

Eyesight quality and Computer Vision Syndrome

PubMed Central

Bogdănici, Camelia Margareta; Săndulache, Diana Elena; Nechita, Corina Andreea

2017-01-01

The aim of the study was to analyze the effects that gadgets have on eyesight quality. A prospective observational study was conducted from January to July 2016, on 60 people who were divided into two groups: Group 1 – 30 middle school pupils with a mean age of 11.9 ± 1.86 and Group 2 – 30 patients evaluated in the Ophthalmology Clinic, “Sf. Spiridon” Hospital, Iași, with a mean age of 21.36 ± 7.16 years. The clinical parameters observed were the following: visual acuity (VA), objective refraction, binocular vision (BV), fusional amplitude (FA), Schirmer’s test. A questionnaire was also distributed, which contained 8 questions that highlighted the gadget’s impact on the eyesight. The use of different gadgets, such as computer, laptops, mobile phones or other displays become part of our everyday life and people experience a variety of ocular symptoms or vision problems related to these. Computer Vision Syndrome (CVS) represents a group of visual and extraocular symptoms associated with sustained use of visual display terminals. Headache, blurred vision, and ocular congestion are the most frequent manifestations determined by the long time use of gadgets. Mobile phones and laptops are the most frequently used gadgets. People who use gadgets for a long time have a sustained effort for accommodation. A small amount of refractive errors (especially myopic shift) was objectively recorded by various studies on near work. Dry eye syndrome could also be identified, and an improvement of visual comfort could be observed after the instillation of artificial tears drops. Computer Vision Syndrome is still under-diagnosed, and people should be made aware of the bad effects the prolonged use of gadgets has on eyesight. PMID:29450383

Quantity and Quality of Computer Use and Academic Achievement: Evidence from a Large-Scale International Test Program

ERIC Educational Resources Information Center

Cheema, Jehanzeb R.; Zhang, Bo

2013-01-01

This study looked at the effect of both quantity and quality of computer use on achievement. The Program for International Student Assessment (PISA) 2003 student survey comprising of 4,356 students (boys, n = 2,129; girls, n = 2,227) was used to predict academic achievement from quantity and quality of computer use while controlling for…

Improving the Optical Quality Factor of the WGM Resonator

NASA Technical Reports Server (NTRS)

Savchenkov, Anatoliy; Matsko, Andrey; Iltchenko, Vladimir

2008-01-01

Resonators usually are characterized with two partially dependent values: finesse (F) and quality factor (Q). The finesse of an empty Fabry-Perot (FP) resonator is defined solely by the quality of its mirrors and is calculated as F=piR(exp 1/2)/(1-R). The maximum up-to-date value of reflectivity R approximately equal to 1 - 1.6 x 10(exp -6) is achieved with dielectric mirrors. An FP resonator made with the mirrors has finesse F=1.9 x 10(exp 6). Further practical increase of the finesse of FP resonators is problematic because of the absorption and the scattering of light in the mirror material through fundamental limit on the reflection losses given by the internal material losses and by thermodynamic density fluctuations on the order of parts in 109. The quality factor of a resonator depends on both its finesse and its geometrical size. A one-dimensional FP resonator has Q=2 F L/lambda, where L is the distance between the mirrors and lambda is the wavelength. It is easy to see that the quality factor of the resonator is unlimited because L is unlimited. F and Q are equally important. In some cases, finesse is technically more valuable than the quality factor. For instance, buildup of the optical power inside the resonator, as well as the Purcell factor, is proportional to finesse. Sometimes, however, the quality factor is more valuable. For example, inverse threshold power of intracavity hyperparametric oscillation is proportional to Q(exp 2) and efficiency of parametric frequency mixing is proportional to Q(exp 3). Therefore, it is important to know both the maximally achievable finesse and quality factor values of a resonator. Whispering gallery mode (WGM) resonators are capable of achieving larger finesse compared to FP resonators. For instance, fused silica resonators with finesse 2.3 x 10(exp 6) and 2.8 x 10(exp 6) have been demonstrated. Crystalline WGM resonators reveal even larger finesse values, F=6.3 x 10(exp 6), because of low attenuation of light in the

Computing health quality measures using Informatics for Integrating Biology and the Bedside.

PubMed

Klann, Jeffrey G; Murphy, Shawn N

2013-04-19

The Health Quality Measures Format (HQMF) is a Health Level 7 (HL7) standard for expressing computable Clinical Quality Measures (CQMs). Creating tools to process HQMF queries in clinical databases will become increasingly important as the United States moves forward with its Health Information Technology Strategic Plan to Stages 2 and 3 of the Meaningful Use incentive program (MU2 and MU3). Informatics for Integrating Biology and the Bedside (i2b2) is one of the analytical databases used as part of the Office of the National Coordinator (ONC)'s Query Health platform to move toward this goal. Our goal is to integrate i2b2 with the Query Health HQMF architecture, to prepare for other HQMF use-cases (such as MU2 and MU3), and to articulate the functional overlap between i2b2 and HQMF. Therefore, we analyze the structure of HQMF, and then we apply this understanding to HQMF computation on the i2b2 clinical analytical database platform. Specifically, we develop a translator between two query languages, HQMF and i2b2, so that the i2b2 platform can compute HQMF queries. We use the HQMF structure of queries for aggregate reporting, which define clinical data elements and the temporal and logical relationships between them. We use the i2b2 XML format, which allows flexible querying of a complex clinical data repository in an easy-to-understand domain-specific language. The translator can represent nearly any i2b2-XML query as HQMF and execute in i2b2 nearly any HQMF query expressible in i2b2-XML. This translator is part of the freely available reference implementation of the QueryHealth initiative. We analyze limitations of the conversion and find it covers many, but not all, of the complex temporal and logical operators required by quality measures. HQMF is an expressive language for defining quality measures, and it will be important to understand and implement for CQM computation, in both meaningful use and population health. However, its current form might allow

Computing Health Quality Measures Using Informatics for Integrating Biology and the Bedside

PubMed Central

Murphy, Shawn N

2013-01-01

Background The Health Quality Measures Format (HQMF) is a Health Level 7 (HL7) standard for expressing computable Clinical Quality Measures (CQMs). Creating tools to process HQMF queries in clinical databases will become increasingly important as the United States moves forward with its Health Information Technology Strategic Plan to Stages 2 and 3 of the Meaningful Use incentive program (MU2 and MU3). Informatics for Integrating Biology and the Bedside (i2b2) is one of the analytical databases used as part of the Office of the National Coordinator (ONC)’s Query Health platform to move toward this goal. Objective Our goal is to integrate i2b2 with the Query Health HQMF architecture, to prepare for other HQMF use-cases (such as MU2 and MU3), and to articulate the functional overlap between i2b2 and HQMF. Therefore, we analyze the structure of HQMF, and then we apply this understanding to HQMF computation on the i2b2 clinical analytical database platform. Specifically, we develop a translator between two query languages, HQMF and i2b2, so that the i2b2 platform can compute HQMF queries. Methods We use the HQMF structure of queries for aggregate reporting, which define clinical data elements and the temporal and logical relationships between them. We use the i2b2 XML format, which allows flexible querying of a complex clinical data repository in an easy-to-understand domain-specific language. Results The translator can represent nearly any i2b2-XML query as HQMF and execute in i2b2 nearly any HQMF query expressible in i2b2-XML. This translator is part of the freely available reference implementation of the QueryHealth initiative. We analyze limitations of the conversion and find it covers many, but not all, of the complex temporal and logical operators required by quality measures. Conclusions HQMF is an expressive language for defining quality measures, and it will be important to understand and implement for CQM computation, in both meaningful use and population

Fast parallel molecular algorithms for DNA-based computation: factoring integers.

PubMed

Chang, Weng-Long; Guo, Minyi; Ho, Michael Shan-Hui

2005-06-01

The RSA public-key cryptosystem is an algorithm that converts input data to an unrecognizable encryption and converts the unrecognizable data back into its original decryption form. The security of the RSA public-key cryptosystem is based on the difficulty of factoring the product of two large prime numbers. This paper demonstrates to factor the product of two large prime numbers, and is a breakthrough in basic biological operations using a molecular computer. In order to achieve this, we propose three DNA-based algorithms for parallel subtractor, parallel comparator, and parallel modular arithmetic that formally verify our designed molecular solutions for factoring the product of two large prime numbers. Furthermore, this work indicates that the cryptosystems using public-key are perhaps insecure and also presents clear evidence of the ability of molecular computing to perform complicated mathematical operations.

Examining the Factor Structure and Hierarchical Nature of the Quality of Life Construct

ERIC Educational Resources Information Center

Wang, Mian; Schalock, Robert L.; Verdugo, Miguel A.; Jenaro, Christina

2010-01-01

There is considerable debate in the area of individual quality of life research regarding the factor structure and hierarchical nature of the quality of life construct. Our purpose in this study was to test via structural equation modeling an a priori quality of life model consisting of eight first-order factors and one second-order factor. Data…

Identifying Consistent and Coherent Dimensions of Nursing Home Quality: Exploratory Factor Analysis of Quality Indicators.

PubMed

Xu, Dongjuan; Kane, Robert L; Shippee, Tetyana; Lewis, Teresa M

2016-12-01

There is a general belief that the markers of nursing home quality do not aggregate easily. Identifying consistent and coherent dimensions of quality that usefully summarize the multiplicity of nursing home quality measures is an important goal. It would simplify interpretation and help consumers, their families and advocates to choose nursing facilities. This study uses quality indicators (QIs) from a state nursing home report card to explore the dimensionality of quality in nursing homes and to determine whether aggregation at the resident versus facility level yields the same underlying dimensions. Cross-sectional study. 382 Medicare- and/or Medicaid-certified nursing homes in Minnesota. Residents admitted to the nursing homes during 2011-2012. 16 QIs obtained from the Minimum Data Set 3.0 assessment instrument between 2011 and 2012 were used in the exploratory factor analysis. Factor analysis results suggest four main factors or dimensions to characterize facility performance: continence care (including 4 QIs), restraints and behavioral symptoms (including 3 QIs), care for specific conditions (including 6 QIs), and physical functioning (including 3 QIs). The resident-level and facility-level results generally agreed for 11 QIs. Nursing home quality of care can be captured in summary measures, which can be used by consumers, providers and researchers. Reporting at the resident or facility level will depend on the purpose. These summary measures can be used by policy-makers to identify and reward high-performing facilities and by families to choose nursing facilities for care. © 2016, Copyright the Authors Journal compilation © 2016, The American Geriatrics Society.

Quantitative Prediction of Computational Quality (so the S and C Folks will Accept it)

NASA Technical Reports Server (NTRS)

Hemsch, Michael J.; Luckring, James M.; Morrison, Joseph H.

2004-01-01

Our choice of title may seem strange but we mean each word. In this talk, we are not going to be concerned with computations made "after the fact", i.e. those for which data are available and which are being conducted for explanation and insight. Here we are interested in preventing S&C design problems by finding them through computation before data are available. For such a computation to have any credibility with those who absorb the risk, it is necessary to quantitatively PREDICT the quality of the computational results.

Quality factor and dose equivalent investigations aboard the Soviet Space Station Mir

NASA Astrophysics Data System (ADS)

Bouisset, P.; Nguyen, V. D.; Parmentier, N.; Akatov, Ia. A.; Arkhangel'Skii, V. V.; Vorozhtsov, A. S.; Petrov, V. M.; Kovalev, E. E.; Siegrist, M.

1992-07-01

Since Dec 1988, date of the French-Soviet joint space mission 'ARAGATZ', the CIRCE device, had recorded dose equivalent and quality factor values inside the Mir station (380-410 km, 51.5 deg). After the initial gas filling two years ago, the low pressure tissue equivalent proportional counter is still in good working conditions. Some results of three periods are presented. The average dose equivalent rates measured are respectively 0.6, 0.8 and 0.6 mSv/day with a quality factor equal to 1.9. Some detailed measurements show the increasing of the dose equivalent rates through the SAA and near polar horns. The real time determination of the quality factors allows to point out high linear energy transfer events with quality factors in the range 10-20.

Effective Teacher Qualities from International Mathematics, Science, and Computer Teachers' Perspectives

ERIC Educational Resources Information Center

Sahin, Alpaslan; Adiguzel, Tufan

2014-01-01

The purpose of this study is to investigate how international teachers, who were from overseas but taught in the United States, rate effective teacher qualities in three domains; personal, professional, and classroom management skills. The study includes 130 international mathematics, science, and computer teachers who taught in a multi-school…

Towards a cyber-physical era: soft computing framework based multi-sensor array for water quality monitoring

NASA Astrophysics Data System (ADS)

Bhardwaj, Jyotirmoy; Gupta, Karunesh K.; Gupta, Rajiv

2018-02-01

New concepts and techniques are replacing traditional methods of water quality parameter measurement systems. This paper introduces a cyber-physical system (CPS) approach for water quality assessment in a distribution network. Cyber-physical systems with embedded sensors, processors and actuators can be designed to sense and interact with the water environment. The proposed CPS is comprised of sensing framework integrated with five different water quality parameter sensor nodes and soft computing framework for computational modelling. Soft computing framework utilizes the applications of Python for user interface and fuzzy sciences for decision making. Introduction of multiple sensors in a water distribution network generates a huge number of data matrices, which are sometimes highly complex, difficult to understand and convoluted for effective decision making. Therefore, the proposed system framework also intends to simplify the complexity of obtained sensor data matrices and to support decision making for water engineers through a soft computing framework. The target of this proposed research is to provide a simple and efficient method to identify and detect presence of contamination in a water distribution network using applications of CPS.

Factors Affecting Teachers' Adoption of Educational Computer Games: A Case Study

ERIC Educational Resources Information Center

Kebritchi, Mansureh

2010-01-01

Even though computer games hold considerable potential for engaging and facilitating learning among today's children, the adoption of modern educational computer games is still meeting significant resistance in K-12 education. The purpose of this paper is to inform educators and instructional designers on factors affecting teachers' adoption of…

Reshaping Computer Literacy Teaching in Higher Education: Identification of Critical Success Factors

ERIC Educational Resources Information Center

Taylor, Estelle; Goede, Roelien; Steyn, Tjaart

2011-01-01

Purpose: Acquiring computer skills is more important today than ever before, especially in a developing country. Teaching of computer skills, however, has to adapt to new technology. This paper aims to model factors influencing the success of the learning of computer literacy by means of an e-learning environment. The research question for this…

Factors that Predict Quality Classroom Technology Use

ERIC Educational Resources Information Center

Hastings, Tricia A.

2009-01-01

Despite technological advancements intended to enhance teaching and learning in the 21st century, numerous teacher and school factors continue to impede quality classroom technology use. Determining the effectiveness of educational technology is challenging and requires a detailed understanding of multifaceted, complex, contextual relationships.…

Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan : ASC software quality engineering practices Version 3.0.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Turgeon, Jennifer L.; Minana, Molly A.; Hackney, Patricia

2009-01-01

The purpose of the Sandia National Laboratories (SNL) Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. Quality is defined in the US Department of Energy/National Nuclear Security Agency (DOE/NNSA) Quality Criteria, Revision 10 (QC-1) as 'conformance to customer requirements and expectations'. This quality plan defines the SNL ASC Program software quality engineering (SQE) practices and provides a mapping of these practices to the SNL Corporate Process Requirement (CPR) 001.3.6; 'Corporate Software Engineering Excellence'. This plan also identifies ASC management's and themore » software project teams responsibilities in implementing the software quality practices and in assessing progress towards achieving their software quality goals. This SNL ASC Software Quality Plan establishes the signatories commitments to improving software products by applying cost-effective SQE practices. This plan enumerates the SQE practices that comprise the development of SNL ASC's software products and explains the project teams opportunities for tailoring and implementing the practices.« less

Key factors for a high-quality VR experience

NASA Astrophysics Data System (ADS)

Champel, Mary-Luc; Doré, Renaud; Mollet, Nicolas

2017-09-01

For many years, Virtual Reality has been presented as a promising technology that could deliver a truly new experience to users. The media and entertainment industry is now investigating the possibility to offer a video-based VR 360 experience. Nevertheless, there is a substantial risk that VR 360 could have the same fate as 3DTV if it cannot offer more than just being the next fad. The present paper aims at presenting the various quality factors required for a high-quality VR experience. More specifically, this paper will focus on the main three VR quality pillars: visual, audio and immersion.

Using Computer-Extracted Data from Electronic Health Records to Measure the Quality of Adolescent Well-Care

PubMed Central

Gardner, William; Morton, Suzanne; Byron, Sepheen C; Tinoco, Aldo; Canan, Benjamin D; Leonhart, Karen; Kong, Vivian; Scholle, Sarah Hudson

2014-01-01

Objective To determine whether quality measures based on computer-extracted EHR data can reproduce findings based on data manually extracted by reviewers. Data Sources We studied 12 measures of care indicated for adolescent well-care visits for 597 patients in three pediatric health systems. Study Design Observational study. Data Collection/Extraction Methods Manual reviewers collected quality data from the EHR. Site personnel programmed their EHR systems to extract the same data from structured fields in the EHR according to national health IT standards. Principal Findings Overall performance measured via computer-extracted data was 21.9 percent, compared with 53.2 percent for manual data. Agreement measures were high for immunizations. Otherwise, agreement between computer extraction and manual review was modest (Kappa = 0.36) because computer-extracted data frequently missed care events (sensitivity = 39.5 percent). Measure validity varied by health care domain and setting. A limitation of our findings is that we studied only three domains and three sites. Conclusions The accuracy of computer-extracted EHR quality reporting depends on the use of structured data fields, with the highest agreement found for measures and in the setting that had the greatest concentration of structured fields. We need to improve documentation of care, data extraction, and adaptation of EHR systems to practice workflow. PMID:24471935

Factors influencing health-related quality of life among Korean cancer survivors.

PubMed

Kim, KiSook; Kim, Ji-Su

2017-01-01

Early cancer detection and remarkable improvements in cancer treatment have seen the cancer survival rate grow steadily for the past 40 years. Despite expectations regarding treatment effectiveness, acceptable quality of life, and a comfortable death, patients with cancer generally have a decreased quality of life. The study aim was to examine the factors influencing health-related quality of life among South Korean cancer survivors for future development of an intervention to enhance their survivorship. Korea National Health and Nutrition Examination Survey 2008-2012 data regarding 1020 cancer survivors were used for analysis. Health-related quality of life was measured using the EuroQol 5-Dimension. The factors influencing health-related quality of life were age, educational status, employment status, income, smoking, time since diagnosis, subjective health status, stress, depression, and suicidal ideation. Individual-centered clinical interventions that consider dimensional-influencing factors, including subjective health status, are needed to improve cancer survivors' health-related quality of life. Subsequent systematic studies are needed regarding dimension-specific differences according to cancer types and time since diagnosis. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Improved look-up table method of computer-generated holograms.

PubMed

Wei, Hui; Gong, Guanghong; Li, Ni

2016-11-10

Heavy computation load and vast memory requirements are major bottlenecks of computer-generated holograms (CGHs), which are promising and challenging in three-dimensional displays. To solve these problems, an improved look-up table (LUT) method suitable for arbitrarily sampled object points is proposed and implemented on a graphics processing unit (GPU) whose reconstructed object quality is consistent with that of the coherent ray-trace (CRT) method. The concept of distance factor is defined, and the distance factors are pre-computed off-line and stored in a look-up table. The results show that while reconstruction quality close to that of the CRT method is obtained, the on-line computation time is dramatically reduced compared with the LUT method on the GPU and the memory usage is lower than that of the novel-LUT considerably. Optical experiments are carried out to validate the effectiveness of the proposed method.

USING COMPUTER MODELS TO DETERMINE THE EFFECT OF STORAGE ON WATER QUALITY

EPA Science Inventory

Studies have indicated that water quality is degraded as a result of long residence times in storage tanks, highlighting the importance of tank design, location, and operation. Computer models, developed to explain some of the mixing and distrribution issues associated with tank...

Exploring Factors That Influence Quality Literature Circles

ERIC Educational Resources Information Center

Young, Chase; Mohr, Kathleen A. J.

2018-01-01

Research indicates that literature circles are an authentic means for literacy development that students typically enjoy. To better understand the potential value and to add to the research base regarding literature circles, this study, involving 17 fourth graders, explores factors that may influence the quality of literature discussions,…

[Etiological factors for developing carpal tunnel syndrome in people who work with computers].

PubMed

Lewańska, Magdalena; Wagrowska-Koski, Ewa; Walusiak-Skorupa, Jolanta

2013-01-01

Carpal tunnel syndrome (CTS) is the most frequent mononeuropathy of upper extremities. From the early 1990's it has been suggested that intensive work with computers can result in CTS development, however, this relationship has not as yet been proved. The aim of the study was to evaluate occupational and non-occupational risk factors for developing CTS in the population of computer-users. The study group comprised 60 patients (58 women and 2 men; mean age: 53.8 +/- 6.35 years) working with computers and suspected of occupational CTS. A survey as well as both median and ulnar nerve conduction examination (NCS) were performed in all the subjects. The patients worked with use of computer for 6.43 +/- 1.71 h per day. The mean latency between the beginning of employment and the occurrence of first CTS symptoms was 12.09 +/- 5.94 years. All patients met the clinical and electrophysiological diagnostic criteria of CTS. In the majority of patients etiological factors for developing CTS were non-occupational: obesity, hypothyroidism, oophorectomy, past hysterectomy, hormonal replacement therapy or oral contraceptives, recent menopause, diabetes, tendovaginitis. In 7 computer-users etiological factors were not identified. The results of our study show that CTS is usually generated by different causes not related with using computers at work.

Benchmarking Potential Factors Leading to Education Quality: A Study of Cambodian Higher Education

ERIC Educational Resources Information Center

Chen, Ching-Yaw; Sok, Phyra; Sok, Keomony

2007-01-01

Purpose: To study the quality in higher education in Cambodia and explore the potential factors leading to quality in Cambodian higher education. Design/methodology/approach: Five main factors that were deemed relevant in providing quality in Cambodian higher education were proposed: academic curriculum and extra-curricular activities, teachers'…

Improving the Quality and Effectiveness of Computer-Mediated Instruction Through Usability Evaluations

ERIC Educational Resources Information Center

Crowther, Michael S.; Keller, Chris C.; Waddoups, Gregory L.

2004-01-01

Brigham Young University's Center for Instructional Design (CID) creates online courses and multimedia instructional applications for university faculty. This paper asserts that including usability testing as a part of evaluation improves the quality and effectiveness of computer-mediated instruction. The paper describes the fundamental purpose…

30 CFR 206.154 - Determination of quantities and qualities for computing royalties.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Determination of quantities and qualities for computing royalties. 206.154 Section 206.154 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR MINERALS REVENUE MANAGEMENT PRODUCT VALUATION Federal Gas § 206.154 Determination of...

Identifying items to assess methodological quality in physical therapy trials: a factor analysis.

PubMed

Armijo-Olivo, Susan; Cummings, Greta G; Fuentes, Jorge; Saltaji, Humam; Ha, Christine; Chisholm, Annabritt; Pasichnyk, Dion; Rogers, Todd

2014-09-01

Numerous tools and individual items have been proposed to assess the methodological quality of randomized controlled trials (RCTs). The frequency of use of these items varies according to health area, which suggests a lack of agreement regarding their relevance to trial quality or risk of bias. The objectives of this study were: (1) to identify the underlying component structure of items and (2) to determine relevant items to evaluate the quality and risk of bias of trials in physical therapy by using an exploratory factor analysis (EFA). A methodological research design was used, and an EFA was performed. Randomized controlled trials used for this study were randomly selected from searches of the Cochrane Database of Systematic Reviews. Two reviewers used 45 items gathered from 7 different quality tools to assess the methodological quality of the RCTs. An exploratory factor analysis was conducted using the principal axis factoring (PAF) method followed by varimax rotation. Principal axis factoring identified 34 items loaded on 9 common factors: (1) selection bias; (2) performance and detection bias; (3) eligibility, intervention details, and description of outcome measures; (4) psychometric properties of the main outcome; (5) contamination and adherence to treatment; (6) attrition bias; (7) data analysis; (8) sample size; and (9) control and placebo adequacy. Because of the exploratory nature of the results, a confirmatory factor analysis is needed to validate this model. To the authors' knowledge, this is the first factor analysis to explore the underlying component items used to evaluate the methodological quality or risk of bias of RCTs in physical therapy. The items and factors represent a starting point for evaluating the methodological quality and risk of bias in physical therapy trials. Empirical evidence of the association among these items with treatment effects and a confirmatory factor analysis of these results are needed to validate these items. �

A Multivariate Evaluation of Factors Affecting the Quality of Freshly Frozen Tissue Specimens.

PubMed

Wang, Tong-Hong; Chen, Chin-Chuan; Liang, Kung-Hao; Chen, Chi-Yuan; Chuang, Wen-Yu; Ueng, Shir-Hwa; Chu, Pao-Hsien; Huang, Chung-Guei; Chen, Tse-Ching; Hsueh, Chuen

2017-08-01

Well-prepared and preserved freshly frozen specimens are indispensable materials for clinical studies. To manage specimen quality and to understand the factors potentially affecting specimen quality during preservation processes, we analyzed the quality of RNA and genomic DNA of various tissues collected between 2002 and 2011 in Linkou Chang Gung Memorial Hospital, Taiwan. During this period, a total of 1059 freshly frozen specimens from eight major cancer categories were examined. It was found that preservation duration, organ origin, and tissue type could all influence the quality of RNA samples. The increased preservation period correlated with decreased RNA quality; the brain, breast, and stomach RNA specimens displayed faster degradation rates than those of other organs, and RNA specimens isolated from tumor tissues were apparently more stable than those of other tissues. These factors could all be used as quality predictors of RNA quality. In contrast, almost all analyses revealed that the genomic DNA samples had good quality, which was not influenced by the aforementioned factors. The results assisted us in determining preservation factors that affect specimen quality, which could provide evidence for improving processes of sample collection and preservation. Furthermore, the results are also useful for researchers to adopt as the evaluation criteria for choosing specimen collection and preservation strategies.

Factors affecting the quality of walnut lumber and veneer

Treesearch

Daniel L. Cassens

2004-01-01

Walnut is a unique species in both its timber and wood characteristics. Although market conditions vary it is generally considered a valuable species. Because of these factors, setting quality (value) levels for both lumber and veneer can be involved. Lumber grades are quantitative thus straight forward once the system is understood. Determining quality in veneer is...

14 CFR 121.647 - Factors for computing fuel required.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Factors for computing fuel required. 121.647 Section 121.647 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF... this subpart shall consider the following: (a) Wind and other weather conditions forecast. (b...

14 CFR 121.647 - Factors for computing fuel required.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Factors for computing fuel required. 121.647 Section 121.647 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF... this subpart shall consider the following: (a) Wind and other weather conditions forecast. (b...

14 CFR 121.647 - Factors for computing fuel required.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Factors for computing fuel required. 121.647 Section 121.647 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF... this subpart shall consider the following: (a) Wind and other weather conditions forecast. (b...

14 CFR 121.647 - Factors for computing fuel required.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Factors for computing fuel required. 121.647 Section 121.647 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF... this subpart shall consider the following: (a) Wind and other weather conditions forecast. (b...

14 CFR 121.647 - Factors for computing fuel required.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Factors for computing fuel required. 121.647 Section 121.647 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF... this subpart shall consider the following: (a) Wind and other weather conditions forecast. (b...

[Research on quality regionalization of cultivated Pseudostellaria heterophylla based on climate factors].

PubMed

Kang, Chuan-Zhi; Zhou, Tao; Jiang, Wei-Ke; Guo, Lan-Ping; Zhang, Xiao-Bo; Xiao, Cheng-Hong; Zhao, Dan

2016-07-01

Maxent model was applied in the study to filtering the climate factors layer by layer. Polysaccharides and pseudostellarin B the two internal quality evaluation index were combined to analyse the interlinkages between climate factors and chemical constituents in order to search for the critical climate factors of Pseudostellaria heterophylla. Then based on the key climate factors to explicit the quality spatial distribution of P. heterophylla. The results showed that polysaccharides and climatic factors had no significant correlation, suggesting that the indicator was not climate-driven metabolites. Pseudostellarin B could construct regression model with the precipitation. And quality regionalization results showed that pseudostellarin B content presented firstly increased and then decreased trend from southeast to northwest, which was the consistent change with precipitation. It clearly proposed that precipitation was the key climate factor, which affected the accumulation of cyclopeptide compound for Pseudostellariae Radix. Copyright© by the Chinese Pharmaceutical Association.

Influence of patient position and other inherent factors on image quality in two different cone beam computed tomography (CBCT) devices.

PubMed

Lindfors, Ninita; Lund, Henrik; Johansson, Hans; Ekestubbe, Annika

2017-01-01

The aim of this in vitro study was to evaluate how a deviation from the horizontal plane, affects the image quality in two different CBCT-devices. A phantom head SK150 (RANDO, The Phantom Laboratory, Salem, NY, USA) was examined in two CBCT-units: Accuitomo 80 and Veraviewepocs 3D R100 (J. Morita Mfg. Corp. Kyoto, Japan). The phantom head was placed with the hard palate parallel to the horizontal plane and tilted 20 ° backwards. Exposures were performed with different field of views (FOVs), voxel sizes, slice thicknesses and exposure settings. Effective dose was calculated using PCXMC 2.0 (STUK, Helsinki, Finland). Image quality was assessed using contrast-to-noise-ratio (CNR). Region of interest (ROI) was set at three different levels of the mandibular bone and soft tissue, uni- and bilaterally in small and large FOVs, respectively. CNR values were calculated by CT-value and standard deviation for each ROI. Factor analysis was used to analyze the material. Tilting the phantom head backwards rendered significantly higher mean CNR values regardless of FOV. The effective dose was lower in small than in large FOVs and varied to a larger extent between CBCT-devices in large FOVs. Head position can affect the image quality. Tilting the head backward improved image quality in the mandibular region. However, if influenced by other variables e.g. motion artifacts in a clinical situation, remains to be further investigated. Image quality assessed using CNR values to investigate the influence of different patient positions and FOVs.

Examining the Relationship between Psychosocial Work Factors and Musculoskeletal Discomfort among Computer Users in Malaysia

PubMed Central

Zakerian, SA; Subramaniam, ID

2011-01-01

Background: With computers rapidly carving a niche in virtually every nook and crevice of today’s fast-paced society, musculoskeletal disorders are becoming more prevalent among computer users, which comprise a wide spectrum of the Malaysian population, including office workers. While extant literature depicts extensive research on musculoskeletal disorders in general, the five dimensions of psychosocial work factors (job demands, job contentment, job control, computer-related problems and social interaction) attributed to work-related musculoskeletal disorders have been neglected. This study examines the aforementioned elements in detail, pertaining to their relationship with musculoskeletal disorders, focusing in particular, on 120 office workers at Malaysian public sector organizations, whose jobs require intensive computer usage. Methods: Research was conducted between March and July 2009 in public service organizations in Malaysia. This study was conducted via a survey utilizing self-complete questionnaires and diary. The relationship between psychosocial work factors and musculoskeletal discomfort was ascertained through regression analyses, which revealed that some factors were more important than others were. Results: The results indicate a significant relationship among psychosocial work factors and musculoskeletal discomfort among computer users. Several of these factors such as job control, computer-related problem and social interaction of psychosocial work factors are found to be more important than others in musculoskeletal discomfort. Conclusion: With computer usage on the rise among users, the prevalence of musculoskeletal discomfort could lead to unnecessary disabilities, hence, the vital need for greater attention to be given on this aspect in the work place, to alleviate to some extent, potential problems in future. PMID:23113058

Analyzing musculoskeletal system discomforts and risk factors in computer-using office workers.

PubMed

Ardahan, Melek; Simsek, Hatice

2016-01-01

This study analyzed the prevalence of work-related computer-user musculoskeletal discomforts, personal and computer-related risk factors. A cross-sectional survey on 395 office workers was made between July-September 2015. Musculoskeletal symptoms and risk factors were evaluated for participants' demographics and job attributes on the 21-item questionnaire and the Turkish-Cornell Musculoskeletal Discomfort Questionnaire. Participants reported musculoskeletal symptoms in the neck (67.85%), back (66.33%), lower back (59.49%), right shoulder (45.32%) and left shoulder (43.54%) during the past week and work interference was 33.6%, 28.5%, 30.6%, 31.3% and 31.9%, respectively. Musculoskeletal discomfort risks were being male, increasing daily computer usage, feeling computer-usage discomfort, hours working at desk and having knowledge about ergonomic exercises. Musculoskeletal symptoms are common in Turkish office workers and indicated the need for more attention to musculoskeletal disorders and designing effective preventive interventions.

Monte Carlo calculations of k{sub Q}, the beam quality conversion factor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muir, B. R.; Rogers, D. W. O.

2010-11-15

Purpose: To use EGSnrc Monte Carlo simulations to directly calculate beam quality conversion factors, k{sub Q}, for 32 cylindrical ionization chambers over a range of beam qualities and to quantify the effect of systematic uncertainties on Monte Carlo calculations of k{sub Q}. These factors are required to use the TG-51 or TRS-398 clinical dosimetry protocols for calibrating external radiotherapy beams. Methods: Ionization chambers are modeled either from blueprints or manufacturers' user's manuals. The dose-to-air in the chamber is calculated using the EGSnrc user-code egs{sub c}hamber using 11 different tabulated clinical photon spectra for the incident beams. The dose to amore » small volume of water is also calculated in the absence of the chamber at the midpoint of the chamber on its central axis. Using a simple equation, k{sub Q} is calculated from these quantities under the assumption that W/e is constant with energy and compared to TG-51 protocol and measured values. Results: Polynomial fits to the Monte Carlo calculated k{sub Q} factors as a function of beam quality expressed as %dd(10){sub x} and TPR{sub 10}{sup 20} are given for each ionization chamber. Differences are explained between Monte Carlo calculated values and values from the TG-51 protocol or calculated using the computer program used for TG-51 calculations. Systematic uncertainties in calculated k{sub Q} values are analyzed and amount to a maximum of one standard deviation uncertainty of 0.99% if one assumes that photon cross-section uncertainties are uncorrelated and 0.63% if they are assumed correlated. The largest components of the uncertainty are the constancy of W/e and the uncertainty in the cross-section for photons in water. Conclusions: It is now possible to calculate k{sub Q} directly using Monte Carlo simulations. Monte Carlo calculations for most ionization chambers give results which are comparable to TG-51 values. Discrepancies can be explained using individual Monte Carlo

30 CFR 1206.154 - Determination of quantities and qualities for computing royalties.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Determination of quantities and qualities for computing royalties. 1206.154 Section 1206.154 Mineral Resources OFFICE OF NATURAL RESOURCES REVENUE, DEPARTMENT OF THE INTERIOR NATURAL RESOURCES REVENUE PRODUCT VALUATION Federal Gas § 1206.154 Determination...

30 CFR 1206.154 - Determination of quantities and qualities for computing royalties.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Determination of quantities and qualities for computing royalties. 1206.154 Section 1206.154 Mineral Resources OFFICE OF NATURAL RESOURCES REVENUE, DEPARTMENT OF THE INTERIOR NATURAL RESOURCES REVENUE PRODUCT VALUATION Federal Gas § 1206.154 Determination...

30 CFR 1206.154 - Determination of quantities and qualities for computing royalties.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Determination of quantities and qualities for computing royalties. 1206.154 Section 1206.154 Mineral Resources OFFICE OF NATURAL RESOURCES REVENUE, DEPARTMENT OF THE INTERIOR NATURAL RESOURCES REVENUE PRODUCT VALUATION Federal Gas § 1206.154 Determination...

Review on pen-and-paper-based observational methods for assessing ergonomic risk factors of computer work.

PubMed

Rahman, Mohd Nasrull Abdol; Mohamad, Siti Shafika

2017-01-01

Computer works are associated with Musculoskeletal Disorders (MSDs). There are several methods have been developed to assess computer work risk factor related to MSDs. This review aims to give an overview of current techniques available for pen-and-paper-based observational methods in assessing ergonomic risk factors of computer work. We searched an electronic database for materials from 1992 until 2015. The selected methods were focused on computer work, pen-and-paper observational methods, office risk factors and musculoskeletal disorders. This review was developed to assess the risk factors, reliability and validity of pen-and-paper observational method associated with computer work. Two evaluators independently carried out this review. Seven observational methods used to assess exposure to office risk factor for work-related musculoskeletal disorders were identified. The risk factors involved in current techniques of pen and paper based observational tools were postures, office components, force and repetition. From the seven methods, only five methods had been tested for reliability. They were proven to be reliable and were rated as moderate to good. For the validity testing, from seven methods only four methods were tested and the results are moderate. Many observational tools already exist, but no single tool appears to cover all of the risk factors including working posture, office component, force, repetition and office environment at office workstations and computer work. Although the most important factor in developing tool is proper validation of exposure assessment techniques, the existing observational method did not test reliability and validity. Futhermore, this review could provide the researchers with ways on how to improve the pen-and-paper-based observational method for assessing ergonomic risk factors of computer work.

Factors leading to the computer vision syndrome: an issue at the contemporary workplace.

PubMed

Izquierdo, Juan C; García, Maribel; Buxó, Carmen; Izquierdo, Natalio J

2007-01-01

Vision and eye related problems are common among computer users, and have been collectively called the Computer Vision Syndrome (CVS). An observational study in order to identify the risk factors leading to the CVS was done. Twenty-eight participants answered a validated questionnaire, and had their workstations examined. The questionnaire evaluated personal, environmental, ergonomic factors, and physiologic response of computer users. The distance from the eye to the computers' monitor (A), the computers' monitor height (B), and visual axis height (C) were measured. The difference between B and C was calculated and labeled as D. Angles of gaze to the computer monitor were calculated using the formula: angle=tan-1(D/A). Angles were divided into two groups: participants with angles of gaze ranging from 0 degree to 13.9 degrees were included in Group 1; and participants gazing at angles larger than 14 degrees were included in Group 2. Statistical analysis of the evaluated variables was made. Computer users in both groups used more tear supplements (as part of the syndrome) than expected. This association was statistically significant (p < 0.10). Participants in Group 1 reported more pain than participants in Group 2. Associations between the CVS and other personal or ergonomic variables were not statistically significant. Our findings show that the most important factor leading to the syndrome is the angle of gaze at the computer monitor. Pain in computer users is diminished when gazing downwards at angles of 14 degrees or more. The CVS remains an under estimated and poorly understood issue at the workplace. The general public, health professionals, the government, and private industries need to be educated about the CVS.

Factors leading to the Computer Vision Syndrome: an issue at the contemporary workplace.

PubMed

Izquierdo, Juan C; García, Maribel; Buxó, Carmen; Izquierdo, Natalio J

2004-01-01

Vision and eye related problems are common among computer users, and have been collectively called the Computer Vision Syndrome (CVS). An observational study in order to identify the risk factors leading to the CVS was done. Twenty-eight participants answered a validated questionnaire, and had their workstations examined. The questionnaire evaluated personal, environmental, ergonomic factors, and physiologic response of computer users. The distance from the eye to the computers' monitor (A), the computers' monitor height (B), and visual axis height (C) were measured. The difference between B and C was calculated and labeled as D. Angles of gaze to the computer monitor were calculated using the formula: angle=tan(-1)(D/ A). Angles were divided into two groups: participants with angles of gaze ranging from 0 degrees to 13.9 degrees were included in Group 1; and participants gazing at angles larger than 14 degrees were included in Group 2. Statistical analysis of the evaluated variables was made. Computer users in both groups used more tear supplements (as part of the syndrome) than expected. This association was statistically significant (p<0.10). Participants in Group 1 reported more pain than participants in Group 2. Associations between the CVS and other personal or ergonomic variables were not statistically significant. Our findings show that most important factor leading to the syndrome is the angle of gaze at the computer monitor. Pain in computer users is diminished when gazing downwards at angles of 14 degrees or more. The CVS remains an under estimated and poorly understood issue at the workplace. The general public, health professionals, the government, and private industries need to be educated about the CVS.

Influences on diet quality in older age: the importance of social factors.

PubMed

Bloom, Ilse; Edwards, Mark; Jameson, Karen A; Syddall, Holly E; Dennison, Elaine; Gale, Catharine R; Baird, Janis; Cooper, Cyrus; Aihie Sayer, Avan; Robinson, Sian

2017-03-01

poor diet quality is common among older people, but little is known about influences on food choice, including the role of psychosocial factors at this age. to identify psychosocial correlates of diet quality in a community-dwelling population of men and women aged 59-73 years; to describe relationships with change in diet quality over 10 years. Longitudinal cohort, Hertfordshire Cohort Study (HCS). HCS participants assessed at baseline (1998-2003: 1,048 men, 862 women); 183 men and 189 women re-assessed in 2011. diet was assessed by administered food frequency questionnaire; diet scores were calculated to describe diet quality at baseline and follow-up. A range of psychosocial factors (social support, social network, participation in leisure activities, depression and anxiety, sense of control) were assessed by questionnaire. at baseline, better diet quality was related to a range of social factors, including increased confiding/emotional social support (men and women), practical support (men) and a larger social network (women) (all P < 0.05). For both men and women, greater participation in social and cognitive leisure activities was related to better diet quality (P < 0.005). There were few associations between measured psychosocial factors at baseline and change in diet score over 10 years, in the follow-up sub-group. However, greater participation in leisure activities, especially cognitive activities, at baseline was associated with smaller declines in diet quality over the 10-year follow-up period for both men (P = 0.017) and women (P = 0.014). in community-dwelling older adults, a range of social factors, that includes greater participation in leisure activities, were associated with diets of better quality. © The Author 2016. Published by Oxford University Press on behalf of the British Geriatrics Society. All rights reserved. For Permissions, please email: journals.permissions@oup.com

A method to incorporate the effect of beam quality on image noise in a digitally reconstructed radiograph (DRR) based computer simulation for optimisation of digital radiography

NASA Astrophysics Data System (ADS)

Moore, Craig S.; Wood, Tim J.; Saunderson, John R.; Beavis, Andrew W.

2017-09-01

The use of computer simulated digital x-radiographs for optimisation purposes has become widespread in recent years. To make these optimisation investigations effective, it is vital simulated radiographs contain accurate anatomical and system noise. Computer algorithms that simulate radiographs based solely on the incident detector x-ray intensity (‘dose’) have been reported extensively in the literature. However, while it has been established for digital mammography that x-ray beam quality is an important factor when modelling noise in simulated images there are no such studies for diagnostic imaging of the chest, abdomen and pelvis. This study investigates the influence of beam quality on image noise in a digital radiography (DR) imaging system, and incorporates these effects into a digitally reconstructed radiograph (DRR) computer simulator. Image noise was measured on a real DR imaging system as a function of dose (absorbed energy) over a range of clinically relevant beam qualities. Simulated ‘absorbed energy’ and ‘beam quality’ DRRs were then created for each patient and tube voltage under investigation. Simulated noise images, corrected for dose and beam quality, were subsequently produced from the absorbed energy and beam quality DRRs, using the measured noise, absorbed energy and beam quality relationships. The noise images were superimposed onto the noiseless absorbed energy DRRs to create the final images. Signal-to-noise measurements in simulated chest, abdomen and spine images were within 10% of the corresponding measurements in real images. This compares favourably to our previous algorithm where images corrected for dose only were all within 20%.

High quality factor surface Fabry-Perot cavity of acoustic waves

NASA Astrophysics Data System (ADS)

Xu, Yuntao; Fu, Wei; Zou, Chang-ling; Shen, Zhen; Tang, Hong X.

2018-02-01

Surface acoustic wave (SAW) resonators are critical components in wireless communications and many sensing applications. They have also recently emerged as a subject of study in quantum acoustics at the single phonon level. Acoustic loss reduction and mode confinement are key performance factors in SAW resonators. Here, we report the design and experimental realization of high quality factor Fabry-Perot SAW resonators formed in between the tapered phononic crystal mirrors patterned on a GaN-on-sapphire material platform. The fabricated SAW resonators are characterized by both an electrical network analyzer and an optical heterodyne vibrometer. We observed standing Rayleigh waves inside the cavity, with an intrinsic quality factor exceeding 1.3 × 104 at ambient conditions.

Development of an Interactive Computer-Based Learning Strategy to Assist in Teaching Water Quality Modelling

ERIC Educational Resources Information Center

Zigic, Sasha; Lemckert, Charles J.

2007-01-01

The following paper presents a computer-based learning strategy to assist in introducing and teaching water quality modelling to undergraduate civil engineering students. As part of the learning strategy, an interactive computer-based instructional (CBI) aid was specifically developed to assist students to set up, run and analyse the output from a…

Factors influencing exemplary science teachers' levels of computer use

NASA Astrophysics Data System (ADS)

Hakverdi, Meral

This study examines exemplary science teachers' use of technology in science instruction, factors influencing their level of computer use, their level of knowledge/skills in using specific computer applications for science instruction, their use of computer-related applications/tools during their instruction, and their students' use of computer applications/tools in or for their science class. After a relevant review of the literature certain variables were selected for analysis. These variables included personal self-efficacy in teaching with computers, outcome expectancy, pupil-control ideology, level of computer use, age, gender, teaching experience, personal computer use, professional computer use and science teachers' level of knowledge/skills in using specific computer applications for science instruction. The sample for this study includes middle and high school science teachers who received the Presidential Award for Excellence in Science Teaching Award (sponsored by the White House and the National Science Foundation) between the years 1997 and 2003 from all 50 states and U.S. territories. Award-winning science teachers were contacted about the survey via e-mail or letter with an enclosed return envelope. Of the 334 award-winning science teachers, usable responses were received from 92 science teachers, which made a response rate of 27.5%. Analysis of the survey responses indicated that exemplary science teachers have a variety of knowledge/skills in using computer related applications/tools. The most commonly used computer applications/tools are information retrieval via the Internet, presentation tools, online communication, digital cameras, and data collection probes. Results of the study revealed that students' use of technology in their science classroom is highly correlated with the frequency of their science teachers' use of computer applications/tools. The results of the multiple regression analysis revealed that personal self-efficacy related to

Quality Parameters of Six Cultivars of Blueberry Using Computer Vision

PubMed Central

Celis Cofré, Daniela; Silva, Patricia; Enrione, Javier; Osorio, Fernando

2013-01-01

Background. Blueberries are considered an important source of health benefits. This work studied six blueberry cultivars: “Duke,” “Brigitta”, “Elliott”, “Centurion”, “Star,” and “Jewel”, measuring quality parameters such as °Brix, pH, moisture content using standard techniques and shape, color, and fungal presence obtained by computer vision. The storage conditions were time (0–21 days), temperature (4 and 15°C), and relative humidity (75 and 90%). Results. Significant differences (P < 0.05) were detected between fresh cultivars in pH, °Brix, shape, and color. However, the main parameters which changed depending on storage conditions, increasing at higher temperature, were color (from blue to red) and fungal presence (from 0 to 15%), both detected using computer vision, which is important to determine a shelf life of 14 days for all cultivars. Similar behavior during storage was obtained for all cultivars. Conclusion. Computer vision proved to be a reliable and simple method to objectively determine blueberry decay during storage that can be used as an alternative approach to currently used subjective measurements. PMID:26904598

Factors Influencing Trainee Participation in Computer Software Applications Training.

ERIC Educational Resources Information Center

Alexander, Melody Webler

1993-01-01

Participants (n=130) who had completed training in WordPerfect, Lotus 1-2-3, and dBase III+ completed a questionnaire related to demographic characteristics and factors that influence training participation. Trainees are participating in computer training for personal reasons, seeking convenient time, location, and length. Child care or…

Psychosocial Factors Associated with Diet Quality in a Working Adult Population

PubMed Central

Dunbar, Sandra B.; Higgins, Melinda; Dai, Jun; Ziegler, Thomas R.; Frediani, Jennifer K.; Reilly, Carolyn; Brigham, Kenneth L.

2014-01-01

The associations between specific intra- and inter-personal psychosocial factors and dietary patterns were explored in a healthy, working adult population. Participants (N= 640) were enrolled in a prospective predictive health study and characterized by a mean age of 48(SD = 11) years, 67% women, and 30% minority. Baseline psychosocial measures of perceived stress, depressive symptoms, social support, and family functioning were examined for their relationships with three diet quality indices - AHEI, DASH, and the Mediterranean. Dietary intake was of moderate quality in this high income, well-educated, psychosocially healthy population. Social support was positively associated with better diet quality for all three indices (p< .01). Further research should focus on socio-environmental factors associated with diet quality. PMID:23408456

Examining the Relationship between Technological, Organizational, and Environmental Factors and Cloud Computing Adoption

ERIC Educational Resources Information Center

Tweel, Abdeneaser

2012-01-01

High uncertainties related to cloud computing adoption may hinder IT managers from making solid decisions about adopting cloud computing. The problem addressed in this study was the lack of understanding of the relationship between factors related to the adoption of cloud computing and IT managers' interest in adopting this technology. In…

Identifying Items to Assess Methodological Quality in Physical Therapy Trials: A Factor Analysis

PubMed Central

Cummings, Greta G.; Fuentes, Jorge; Saltaji, Humam; Ha, Christine; Chisholm, Annabritt; Pasichnyk, Dion; Rogers, Todd

2014-01-01

Background Numerous tools and individual items have been proposed to assess the methodological quality of randomized controlled trials (RCTs). The frequency of use of these items varies according to health area, which suggests a lack of agreement regarding their relevance to trial quality or risk of bias. Objective The objectives of this study were: (1) to identify the underlying component structure of items and (2) to determine relevant items to evaluate the quality and risk of bias of trials in physical therapy by using an exploratory factor analysis (EFA). Design A methodological research design was used, and an EFA was performed. Methods Randomized controlled trials used for this study were randomly selected from searches of the Cochrane Database of Systematic Reviews. Two reviewers used 45 items gathered from 7 different quality tools to assess the methodological quality of the RCTs. An exploratory factor analysis was conducted using the principal axis factoring (PAF) method followed by varimax rotation. Results Principal axis factoring identified 34 items loaded on 9 common factors: (1) selection bias; (2) performance and detection bias; (3) eligibility, intervention details, and description of outcome measures; (4) psychometric properties of the main outcome; (5) contamination and adherence to treatment; (6) attrition bias; (7) data analysis; (8) sample size; and (9) control and placebo adequacy. Limitation Because of the exploratory nature of the results, a confirmatory factor analysis is needed to validate this model. Conclusions To the authors' knowledge, this is the first factor analysis to explore the underlying component items used to evaluate the methodological quality or risk of bias of RCTs in physical therapy. The items and factors represent a starting point for evaluating the methodological quality and risk of bias in physical therapy trials. Empirical evidence of the association among these items with treatment effects and a confirmatory factor

The quality of risk factor screening during antenatal consultations in Niger.

PubMed

Prual, A; Toure, A; Huguet, D; Laurent, Y

2000-03-01

A decade after the first International Conference on Safe Motherhood, maternal mortality remains very high in most West African countries, even in capital cities. The detection of high risk pregnancies, known as the risk approach, during antenatal consultations has been the basis of most maternal and child health programmes over the last decade. The effectiveness of antenatal care as a tool to prevent or predict obstetric complications is being questioned more and more. In addition to the scarcity of reliable data about the predictivity of most risk factors, the quality of the screening must be questioned. The goal of this study was to assess the frequency of risk factors among a sample of pregnant women attending antenatal care in Niger and to assess the quality of the screening of those risk factors. Overall, 330 pregnant women were enrolled in the study. Each woman was examined twice: the first time by a midwife, the second time by one of the authors but without knowledge of the results of the first consultation. Fifty-five percent of pregnant women had at least one risk factor, 31% had more than one. Ninety-one percent of the risk factors were detected at interview. The following risk factors were not systematically searched for by midwives: height (48.5%), blood pressure (43.6%), glycosuria (40.6%), vaginal bleeding (38.2%), oedema (37.3%), parity (17%), age (16%), previous caesarean section (15.2%), previous stillbirth (15.2%) and previous miscarriages (14.8%). This study has shown that, in Niger, the quality of screening for risk factors during antenatal consultation is poor. In the urban settings where this study took place, lack of personnel, lack of equipment, lack of time and poor compliance by women cannot be made responsible for this situation. While screening of these risk factors continues as policy, the quality of screening must be dramatically improved.

Home care nurses' attitudes toward computers. A confirmatory factor analysis of the Stronge and Brodt instrument.

PubMed

Stricklin, Mary Lou; Bierer, S Beth; Struk, Cynthia

2003-01-01

Point-of-care technology for home care use will be the final step in enterprise-wide healthcare electronic communications. Successful implementation of home care point-of-care technology hinges upon nurses' attitudes toward point-of-care technology and its use in clinical practice. This study addresses the factors associated with home care nurses' attitudes using Stronge and Brodt's Nurse Attitudes Toward Computers instrument. In this study, the Nurses Attitudes Toward Computers instrument was administered to a convenience sample of 138 nurses employed by a large midwestern home care agency, with an 88% response rate. Confirmatory factor analysis corroborated the Nurses Attitudes Toward Computers' 3-dimensional factor structure for practicing nurses, which was labeled as nurses' work, security issues, and perceived barriers. Results from the confirmatory factor analysis also suggest that these 3 factors are internally correlated and represent multiple dimensions of a higher order construct labeled as nurses' attitudes toward computers. Additionally, two of these factors, nurses' work and perceived barriers, each appears to explain more variance in nurses' attitudes toward computers than security issues. Instrument reliability was high for the sample (.90), with subscale reliabilities ranging from 86 to 70.

Microcrystalline diamond cylindrical resonators with quality-factor up to 0.5 million

NASA Astrophysics Data System (ADS)

Saito, Daisuke; Yang, Chen; Heidari, Amir; Najar, Hadi; Lin, Liwei; Horsley, David A.

2016-02-01

We demonstrate high quality-factor 1.5 mm diameter batch-fabricated microcrystalline diamond cylindrical resonators (CR) with quality-factors limited by thermoelastic damping (TED) and surface loss. Resonators were fabricated 2.6 and 5.3 μm thick in-situ boron-doped microcrystalline diamond films deposited using hot filament chemical vapor deposition. The quality-factor (Q) of as-fabricated CR's was found to increase with the resonator diameter and diamond thickness. Annealing the CRs at 700 °C in a nitrogen atmosphere led to a three-fold increase in Q, a result we attribute to thinning of the diamond layer via reaction with residual O2 in the annealing furnace. Post-anneal Q exceeding 0.5 million (528 000) was measured at the 19 kHz elliptical wineglass modes, producing a ring-down time of 8.9 s. A model for Q versus diamond thickness and resonance frequency is developed including the effects of TED and surface loss. Measured quality factors are shown to agree with the predictions of this model.

Evidence-based ergonomics education: Promoting risk factor awareness among office computer workers.

PubMed

Mani, Karthik; Provident, Ingrid; Eckel, Emily

2016-01-01

Work-related musculoskeletal disorders (WMSDs) related to computer work have become a serious public health concern. Literature revealed a positive association between computer use and WMSDs. The purpose of this evidence-based pilot project was to provide a series of evidence-based educational sessions on ergonomics to office computer workers to enhance the awareness of risk factors of WMSDs. Seventeen office computer workers who work for the National Board of Certification in Occupational Therapy volunteered for this project. Each participant completed a baseline and post-intervention ergonomics questionnaire and attended six educational sessions. The Rapid Office Strain Assessment and an ergonomics questionnaire were used for data collection. The post-intervention data revealed that 89% of participants were able to identify a greater number of risk factors and answer more questions correctly in knowledge tests of the ergonomics questionnaire. Pre- and post-intervention comparisons showed changes in work posture and behaviors (taking rest breaks, participating in exercise, adjusting workstation) of participants. The findings have implications for injury prevention in office settings and suggest that ergonomics education may yield positive knowledge and behavioral changes among computer workers.

[Quality of life and related factors among climacteric women from south Brazil].

PubMed

de Lorenzi, Dino R S; Saciloto, Bruno; Artico, Graziela R; Fontana, Sabrina K R

2009-01-01

This study aimed to evaluate the quality of life in climacteric and associated factor among women from Southeast Brazil. A cross-section study of 506 women aged between 45 and 60 years old attended at a university climacteric clinic from South Brazil from June to October 2002. Hysterectomized women, as well as hormonal therapy or hormonal contraceptive users were excluded. The quality of life was evaluated by the Women's Health Questionnaire (WHQ). Statistical analysis was performed with multiple linear regression analysis. The average of the age among the studied women was 51.3 (+/- 4.5) years old. About 15.4% were premenopausal, 34.4% perimenopausal and 50.2% postmenopausal women. The quality of life showed up deteriorated among the studied women. The factors related with quality of life were: the educational level (p < 0.01), the confirmation of smoking in the last year (p < 0.01), regular physical activity (p < 0.01), the confirmation of previous co-morbidities (p < 0.01) and the menopausal status (p < 0.01). A higher educational level, as well as the confirmation of regular physical activity led to a significant increase on their life quality. Smoking and previous clinical co-morbidities were responsible for the lower scores of quality of life. The pre-menopause was associated with a higher life quality level if compared to peri and post menopause. No differences in relation to the scores of life were identified among the perimenopausal and postmenopausal women. Nevertheless the menopausal status showed up associated to the quality of life, the results of the study pointed out that the climacteric is not just influenced by biological factors, but also by psychosocial and cultural factors.

Computers in the Workplace.

ERIC Educational Resources Information Center

Gattiker, Urs E.; And Others

It is expected that by 1990 the majority of clerical and managerial workers in North America will use computers in their daily work. An integrative model was developed which views quality of work life as an ever changing dimension influenced by computerization and by perception of career success and non-work factors. To test this model, a study…

The M-Integral for Computing Stress Intensity Factors in Generally Anisotropic Materials

NASA Technical Reports Server (NTRS)

Warzynek, P. A.; Carter, B. J.; Banks-Sills, L.

2005-01-01

The objective of this project is to develop and demonstrate a capability for computing stress intensity factors in generally anisotropic materials. These objectives have been met. The primary deliverable of this project is this report and the information it contains. In addition, we have delivered the source code for a subroutine that will compute stress intensity factors for anisotropic materials encoded in both the C and Python programming languages and made available a version of the FRANC3D program that incorporates this subroutine. Single crystal super alloys are commonly used for components in the hot sections of contemporary jet and rocket engines. Because these components have a uniform atomic lattice orientation throughout, they exhibit anisotropic material behavior. This means that stress intensity solutions developed for isotropic materials are not appropriate for the analysis of crack growth in these materials. Until now, a general numerical technique did not exist for computing stress intensity factors of cracks in anisotropic materials and cubic materials in particular. Such a capability was developed during the project and is described and demonstrated herein.

Advanced Computational Methods for High-accuracy Refinement of Protein Low-quality Models

NASA Astrophysics Data System (ADS)

Zang, Tianwu

Predicting the 3-dimentional structure of protein has been a major interest in the modern computational biology. While lots of successful methods can generate models with 3˜5A root-mean-square deviation (RMSD) from the solution, the progress of refining these models is quite slow. It is therefore urgently needed to develop effective methods to bring low-quality models to higher-accuracy ranges (e.g., less than 2 A RMSD). In this thesis, I present several novel computational methods to address the high-accuracy refinement problem. First, an enhanced sampling method, named parallel continuous simulated tempering (PCST), is developed to accelerate the molecular dynamics (MD) simulation. Second, two energy biasing methods, Structure-Based Model (SBM) and Ensemble-Based Model (EBM), are introduced to perform targeted sampling around important conformations. Third, a three-step method is developed to blindly select high-quality models along the MD simulation. These methods work together to make significant refinement of low-quality models without any knowledge of the solution. The effectiveness of these methods is examined in different applications. Using the PCST-SBM method, models with higher global distance test scores (GDT_TS) are generated and selected in the MD simulation of 18 targets from the refinement category of the 10th Critical Assessment of Structure Prediction (CASP10). In addition, in the refinement test of two CASP10 targets using the PCST-EBM method, it is indicated that EBM may bring the initial model to even higher-quality levels. Furthermore, a multi-round refinement protocol of PCST-SBM improves the model quality of a protein to the level that is sufficient high for the molecular replacement in X-ray crystallography. Our results justify the crucial position of enhanced sampling in the protein structure prediction and demonstrate that a considerable improvement of low-accuracy structures is still achievable with current force fields.

Neutrons in proton pencil beam scanning: parameterization of energy, quality factors and RBE

NASA Astrophysics Data System (ADS)

Schneider, Uwe; Hälg, Roger A.; Baiocco, Giorgio; Lomax, Tony

2016-08-01

The biological effectiveness of neutrons produced during proton therapy in inducing cancer is unknown, but potentially large. In particular, since neutron biological effectiveness is energy dependent, it is necessary to estimate, besides the dose, also the energy spectra, in order to obtain quantities which could be a measure of the biological effectiveness and test current models and new approaches against epidemiological studies on cancer induction after proton therapy. For patients treated with proton pencil beam scanning, this work aims to predict the spatially localized neutron energies, the effective quality factor, the weighting factor according to ICRP, and two RBE values, the first obtained from the saturation corrected dose mean lineal energy and the second from DSB cluster induction. A proton pencil beam was Monte Carlo simulated using GEANT. Based on the simulated neutron spectra for three different proton beam energies a parameterization of energy, quality factors and RBE was calculated. The pencil beam algorithm used for treatment planning at PSI has been extended using the developed parameterizations in order to calculate the spatially localized neutron energy, quality factors and RBE for each treated patient. The parameterization represents the simple quantification of neutron energy in two energy bins and the quality factors and RBE with a satisfying precision up to 85 cm away from the proton pencil beam when compared to the results based on 3D Monte Carlo simulations. The root mean square error of the energy estimate between Monte Carlo simulation based results and the parameterization is 3.9%. For the quality factors and RBE estimates it is smaller than 0.9%. The model was successfully integrated into the PSI treatment planning system. It was found that the parameterizations for neutron energy, quality factors and RBE were independent of proton energy in the investigated energy range of interest for proton therapy. The pencil beam algorithm has

Neutrons in proton pencil beam scanning: parameterization of energy, quality factors and RBE.

PubMed

Schneider, Uwe; Hälg, Roger A; Baiocco, Giorgio; Lomax, Tony

2016-08-21

The biological effectiveness of neutrons produced during proton therapy in inducing cancer is unknown, but potentially large. In particular, since neutron biological effectiveness is energy dependent, it is necessary to estimate, besides the dose, also the energy spectra, in order to obtain quantities which could be a measure of the biological effectiveness and test current models and new approaches against epidemiological studies on cancer induction after proton therapy. For patients treated with proton pencil beam scanning, this work aims to predict the spatially localized neutron energies, the effective quality factor, the weighting factor according to ICRP, and two RBE values, the first obtained from the saturation corrected dose mean lineal energy and the second from DSB cluster induction. A proton pencil beam was Monte Carlo simulated using GEANT. Based on the simulated neutron spectra for three different proton beam energies a parameterization of energy, quality factors and RBE was calculated. The pencil beam algorithm used for treatment planning at PSI has been extended using the developed parameterizations in order to calculate the spatially localized neutron energy, quality factors and RBE for each treated patient. The parameterization represents the simple quantification of neutron energy in two energy bins and the quality factors and RBE with a satisfying precision up to 85 cm away from the proton pencil beam when compared to the results based on 3D Monte Carlo simulations. The root mean square error of the energy estimate between Monte Carlo simulation based results and the parameterization is 3.9%. For the quality factors and RBE estimates it is smaller than 0.9%. The model was successfully integrated into the PSI treatment planning system. It was found that the parameterizations for neutron energy, quality factors and RBE were independent of proton energy in the investigated energy range of interest for proton therapy. The pencil beam algorithm has

Public library computer training for older adults to access high-quality Internet health information

PubMed Central

Xie, Bo; Bugg, Julie M.

2010-01-01

An innovative experiment to develop and evaluate a public library computer training program to teach older adults to access and use high-quality Internet health information involved a productive collaboration among public libraries, the National Institute on Aging and the National Library of Medicine of the National Institutes of Health (NIH), and a Library and Information Science (LIS) academic program at a state university. One hundred and thirty-one older adults aged 54–89 participated in the study between September 2007 and July 2008. Key findings include: a) participants had overwhelmingly positive perceptions of the training program; b) after learning about two NIH websites (http://nihseniorhealth.gov and http://medlineplus.gov) from the training, many participants started using these online resources to find high quality health and medical information and, further, to guide their decision-making regarding a health- or medically-related matter; and c) computer anxiety significantly decreased (p < .001) while computer interest and efficacy significantly increased (p = .001 and p < .001, respectively) from pre- to post-training, suggesting statistically significant improvements in computer attitudes between pre- and post-training. The findings have implications for public libraries, LIS academic programs, and other organizations interested in providing similar programs in their communities. PMID:20161649

Factors (Not) Affecting What Students Do with Computers and Internet at Home

ERIC Educational Resources Information Center

Hinostroza, J. Enrique; Matamala, Carolina; Labbé, Christian; Claro, Magdalena; Cabello, Tania

2015-01-01

This paper presents the results of an analysis of secondary students' computer use, aimed at understanding how different factors influence the profile of activities carried out by students with computers. The analysis is based on the data from a national study aimed at measuring students' Information and Communication Technology (ICT) skills for…

Factors Affecting Career Choice: Comparison between Students from Computer and Other Disciplines

ERIC Educational Resources Information Center

Alexander, P. M.; Holmner, M.; Lotriet, H. H.; Matthee, M. C.; Pieterse, H. V.; Naidoo, S.; Twinomurinzi, H.; Jordaan, D.

2011-01-01

The number of student enrolments in computer-related courses remains a serious concern worldwide with far reaching consequences. This paper reports on an extensive survey about career choice and associated motivational factors amongst new students, only some of whom intend to major in computer-related courses, at two South African universities.…

Predicting Forearm Physical Exposures During Computer Work Using Self-Reports, Software-Recorded Computer Usage Patterns, and Anthropometric and Workstation Measurements.

PubMed

Huysmans, Maaike A; Eijckelhof, Belinda H W; Garza, Jennifer L Bruno; Coenen, Pieter; Blatter, Birgitte M; Johnson, Peter W; van Dieën, Jaap H; van der Beek, Allard J; Dennerlein, Jack T

2017-12-15

Alternative techniques to assess physical exposures, such as prediction models, could facilitate more efficient epidemiological assessments in future large cohort studies examining physical exposures in relation to work-related musculoskeletal symptoms. The aim of this study was to evaluate two types of models that predict arm-wrist-hand physical exposures (i.e. muscle activity, wrist postures and kinematics, and keyboard and mouse forces) during computer use, which only differed with respect to the candidate predicting variables; (i) a full set of predicting variables, including self-reported factors, software-recorded computer usage patterns, and worksite measurements of anthropometrics and workstation set-up (full models); and (ii) a practical set of predicting variables, only including the self-reported factors and software-recorded computer usage patterns, that are relatively easy to assess (practical models). Prediction models were build using data from a field study among 117 office workers who were symptom-free at the time of measurement. Arm-wrist-hand physical exposures were measured for approximately two hours while workers performed their own computer work. Each worker's anthropometry and workstation set-up were measured by an experimenter, computer usage patterns were recorded using software and self-reported factors (including individual factors, job characteristics, computer work behaviours, psychosocial factors, workstation set-up characteristics, and leisure-time activities) were collected by an online questionnaire. We determined the predictive quality of the models in terms of R2 and root mean squared (RMS) values and exposure classification agreement to low-, medium-, and high-exposure categories (in the practical model only). The full models had R2 values that ranged from 0.16 to 0.80, whereas for the practical models values ranged from 0.05 to 0.43. Interquartile ranges were not that different for the two models, indicating that only for some

[Temporal variation of water quality and driving factors in Yanghe watershed of Zhangjiakou].

PubMed

Pang, Bo; Wang, Tie-Yu; Lü, Yong-Long; Du, Li-Yu; Luo, Wei

2013-01-01

Yanghe is an important water source for Guanting Reservoir, which once supplied the Beijing city with drinking water, industrial process water and water-use in landscape. Based on the data of water quality monitored by Yanghe watershed monitoring stations from 1992 to 2009, 11 pollutants were selected for analysis. The trends of changes in water quality were figured out, and the major pollutants and driving factors were measured by the integrated standard index and grey correlation analytical methods. The results showed that there were two stages of water quality change in Yanghe watershed of Zhangjiakou. Firstly, the water was polluted seriously but recovered rapidly from 1992 to 1996. Secondly, although light pollution occurred in the watershed from 1997 to 2009, the pollution factors were still above the limits. The main pollution factors are ammonia nitrogen, petroleum, permanganate index, BOD5, Cr6+ and Cd. The main driving factor of water quality is the change of land use type, and the agricultural land showed less impact on water quality than the industrial land.

Image quality of mixed convolution kernel in thoracic computed tomography.

PubMed

Neubauer, Jakob; Spira, Eva Maria; Strube, Juliane; Langer, Mathias; Voss, Christian; Kotter, Elmar

2016-11-01

The mixed convolution kernel alters his properties geographically according to the depicted organ structure, especially for the lung. Therefore, we compared the image quality of the mixed convolution kernel to standard soft and hard kernel reconstructions for different organ structures in thoracic computed tomography (CT) images.Our Ethics Committee approved this prospective study. In total, 31 patients who underwent contrast-enhanced thoracic CT studies were included after informed consent. Axial reconstructions were performed with hard, soft, and mixed convolution kernel. Three independent and blinded observers rated the image quality according to the European Guidelines for Quality Criteria of Thoracic CT for 13 organ structures. The observers rated the depiction of the structures in all reconstructions on a 5-point Likert scale. Statistical analysis was performed with the Friedman Test and post hoc analysis with the Wilcoxon rank-sum test.Compared to the soft convolution kernel, the mixed convolution kernel was rated with a higher image quality for lung parenchyma, segmental bronchi, and the border between the pleura and the thoracic wall (P < 0.03). Compared to the hard convolution kernel, the mixed convolution kernel was rated with a higher image quality for aorta, anterior mediastinal structures, paratracheal soft tissue, hilar lymph nodes, esophagus, pleuromediastinal border, large and medium sized pulmonary vessels and abdomen (P < 0.004) but a lower image quality for trachea, segmental bronchi, lung parenchyma, and skeleton (P < 0.001).The mixed convolution kernel cannot fully substitute the standard CT reconstructions. Hard and soft convolution kernel reconstructions still seem to be mandatory for thoracic CT.

The study of surgical image quality evaluation system by subjective quality factor method

NASA Astrophysics Data System (ADS)

Zhang, Jian J.; Xuan, Jason R.; Yang, Xirong; Yu, Honggang; Koullick, Edouard

2016-03-01

GreenLightTM procedure is an effective and economical way of treatment of benign prostate hyperplasia (BPH); there are almost a million of patients treated with GreenLightTM worldwide. During the surgical procedure, the surgeon or physician will rely on the monitoring video system to survey and confirm the surgical progress. There are a few obstructions that could greatly affect the image quality of the monitoring video, like laser glare by the tissue and body fluid, air bubbles and debris generated by tissue evaporation, and bleeding, just to name a few. In order to improve the physician's visual experience of a laser surgical procedure, the system performance parameter related to image quality needs to be well defined. However, since image quality is the integrated set of perceptions of the overall degree of excellence of an image, or in other words, image quality is the perceptually weighted combination of significant attributes (contrast, graininess …) of an image when considered in its marketplace or application, there is no standard definition on overall image or video quality especially for the no-reference case (without a standard chart as reference). In this study, Subjective Quality Factor (SQF) and acutance are used for no-reference image quality evaluation. Basic image quality parameters, like sharpness, color accuracy, size of obstruction and transmission of obstruction, are used as subparameter to define the rating scale for image quality evaluation or comparison. Sample image groups were evaluated by human observers according to the rating scale. Surveys of physician groups were also conducted with lab generated sample videos. The study shows that human subjective perception is a trustworthy way of image quality evaluation. More systematic investigation on the relationship between video quality and image quality of each frame will be conducted as a future study.

A FRAMEWORK FOR FINE-SCALE COMPUTATIONAL FLUID DYNAMICS AIR QUALITY MODELING AND ANALYSIS

EPA Science Inventory

This paper discusses a framework for fine-scale CFD modeling that may be developed to complement the present Community Multi-scale Air Quality (CMAQ) modeling system which itself is a computational fluid dynamics model. A goal of this presentation is to stimulate discussions on w...

An Integrated Computer Modeling Environment for Regional Land Use, Air Quality, and Transportation Planning

DOT National Transportation Integrated Search

1997-04-01

The Land Use, Air Quality, and Transportation Integrated Modeling Environment (LATIME) represents an integrated approach to computer modeling and simulation of land use allocation, travel demand, and mobile source emissions for the Albuquerque, New M...

Snacking patterns, diet quality, and cardiovascular risk factors in adults

USDA-ARS?s Scientific Manuscript database

The relationship of snacking patterns on nutrient intake and cardiovascular risk factors in adults is unknown. The aim of this study was to examine the associations of snacking patterns with nutrient intake, diet quality, and a selection of cardiovascular risk factors in adults participating in the ...

Quality control in the development of coagulation factor concentrates.

PubMed

Snape, T J

1987-01-01

Limitation of process change is a major factor contributing to assurance of quality in pharmaceutical manufacturing. This is particularly true in the manufacture of coagulation factor concentrates, for which presumptive testing for poorly defined product characteristics is an integral feature of finished product quality control. The development of new or modified preparations requires that this comfortable position be abandoned, and that the effect on finished product characteristics of changes to individual process steps (and components) be assessed. The degree of confidence in the safety and efficacy of the new product will be determined by, amongst other things, the complexity of the process alteration and the extent to which the results of finished product tests can be considered predictive. The introduction of a heat-treatment step for inactivation of potential viral contaminants in coagulation factor concentrates presents a significant challenge in both respects, quite independent of any consideration of assessment of the effectiveness of the viral inactivation step. These interactions are illustrated by some of the problems encountered with terminal dry heat-treatment (72 h. at 80 degrees C) of factor VIII and prothrombin complex concentrates manufactured by the Blood Products Laboratory.

Workstyle risk factors for work related musculoskeletal symptoms among computer professionals in India.

PubMed

Sharan, Deepak; Parijat, Prakriti; Sasidharan, Ajeesh Padinjattethil; Ranganathan, Rameshkumar; Mohandoss, Mathankumar; Jose, Jeena

2011-12-01

Work-related musculoskeletal disorders are common in computer professionals. Workstyle may be one of the risk factors in the development of musculoskeletal discomfort. The objective of this retrospective study was to examine the prevalence of adverse workstyle in computer professionals from India and to evaluate if workstyle factors were predictors of pain and loss of productivity. Office workers from various information technology (IT) companies in India responded to the short-form workstyle questionnaire and pain questionnaire. Correlation analyses were conducted to examine the associations between different variables followed by a multivariate logistic regression to understand the unique predictors of pain and loss of productivity. 4,500 participants responded to the workstyle and pain questionnaire. 22% of participants were reported to have a high risk of an adverse workstyle. 63% of participants reported pain symptoms. Social reactivity, lack of breaks, and deadlines/pressure subscales of workstyle questionnaire were significantly correlated with pain and loss of productivity. Regression analyses revealed that workstyle factors and duration of computer use per day were significant predictors of pain. Workstyle seems to be a mediating factor for musculoskeletal pain, discomfort, and loss of productivity. Based on the study findings, it is recommended that intervention efforts directed towards prevention of musculoskeletal disorders should focus on psychosocial work factors such adverse workstyle in addition to biomechanical risk factors.

Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan. Part 1 : ASC software quality engineering practices version 1.0.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Minana, Molly A.; Sturtevant, Judith E.; Heaphy, Robert

2005-01-01

The purpose of the Sandia National Laboratories (SNL) Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. Quality is defined in DOE/AL Quality Criteria (QC-1) as conformance to customer requirements and expectations. This quality plan defines the ASC program software quality practices and provides mappings of these practices to the SNL Corporate Process Requirements (CPR 1.3.2 and CPR 1.3.6) and the Department of Energy (DOE) document, ASCI Software Quality Engineering: Goals, Principles, and Guidelines (GP&G). This quality plan identifies ASC management andmore » software project teams' responsibilities for cost-effective software engineering quality practices. The SNL ASC Software Quality Plan establishes the signatories commitment to improving software products by applying cost-effective software engineering quality practices. This document explains the project teams opportunities for tailoring and implementing the practices; enumerates the practices that compose the development of SNL ASC's software products; and includes a sample assessment checklist that was developed based upon the practices in this document.« less

Factors affecting the quality of life in childhood epilepsy in China.

PubMed

Yong, L; Chengye, J; Jiong, Q

2006-03-01

To explore the level of, and factors affecting the quality of life (QOL) in childhood epilepsy in China. At the Peking University First Hospital, we consecutively identified 418 parents whose children were with known epilepsy to complete a questionnaire, which included children's demographic characteristics, clinical message of epilepsy, QOL, familial message, parental symptoms of anxiety/depression. Significant (p<0.05) affecting factors of children's quality of life included current educational degree, mental development, age at diagnosis, age at onset, seizure frequency, duration, AED number; parental significant (p<0.05) affecting factors included anxiety, depression and health. On regression analysis, parental anxiety was the most important factor in explaining lower QOL in childhood epilepsy. AEDs, familial economic state, paternal career, seizure frequency were also significant factors. Parental anxiety outweighed the physical factors in determining QOL in childhood epilepsy. Recognition of this will be helpful for professionals to treat disease and improve the QOL of childhood epilepsy.

Microcrystalline diamond cylindrical resonators with quality-factor up to 0.5 million

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saito, Daisuke; Yang, Chen; Lin, Liwei

2016-02-01

We demonstrate high quality-factor 1.5 mm diameter batch-fabricated microcrystalline diamond cylindrical resonators (CR) with quality-factors limited by thermoelastic damping (TED) and surface loss. Resonators were fabricated 2.6 and 5.3 μm thick in-situ boron-doped microcrystalline diamond films deposited using hot filament chemical vapor deposition. The quality-factor (Q) of as-fabricated CR's was found to increase with the resonator diameter and diamond thickness. Annealing the CRs at 700 °C in a nitrogen atmosphere led to a three-fold increase in Q, a result we attribute to thinning of the diamond layer via reaction with residual O{sub 2} in the annealing furnace. Post-anneal Q exceeding 0.5 million (528 000)more » was measured at the 19 kHz elliptical wineglass modes, producing a ring-down time of 8.9 s. A model for Q versus diamond thickness and resonance frequency is developed including the effects of TED and surface loss. Measured quality factors are shown to agree with the predictions of this model.« less

Total quality through computer integrated manufacturing in the pharmaceutical industry.

PubMed

Ufret, C M

1995-01-01

The role of Computer Integrated Manufacturing (CIM) in the pursue of total quality in pharmaceutical manufacturing is assessed. CIM key objectives, design criteria, and performance measurements, in addition to its scope and implementation in a hierarchical structure, are explored in detail. Key elements for the success of each phase in a CIM project and a brief status of current CIM implementations in the pharmaceutical industry are presented. The role of World Class Manufacturing performance standards and other key issues to achieve full CIM benefits are also addressed.

Yogurt, diet quality and lifestyle factors.

PubMed

Panahi, S; Fernandez, M A; Marette, A; Tremblay, A

2017-05-01

Yogurt consumption has been associated with healthy dietary patterns and lifestyles, better diet quality and healthier metabolic profiles. Studies have shown that frequent yogurt consumers do not only have higher nutrient intakes, but also an improved diet quality, which includes higher consumption of fruits and vegetables, whole grains, and dairy compared with low or non-consumers indicating better compliance with dietary guidelines. Recent epidemiological and clinical evidence suggests that yogurt contributes to better metabolic health because of its effects on the control of body weight, energy homeostasis and glycemic control. Furthermore, yogurt consumers have been shown to be more physically active (⩾ 2 h/week), smoke less, have higher education and knowledge of nutrition compared with non-consumers. Thus, yogurt consumption may be considered a signature of a healthy diet through its nutritional content, impact on metabolic health including the control of energy balance, body weight and glycemia and its relationships with healthier behaviors and lifestyle factors.

Human factors systems approach to healthcare quality and patient safety

PubMed Central

Carayon, Pascale; Wetterneck, Tosha B.; Rivera-Rodriguez, A. Joy; Hundt, Ann Schoofs; Hoonakker, Peter; Holden, Richard; Gurses, Ayse P.

2013-01-01

Human factors systems approaches are critical for improving healthcare quality and patient safety. The SEIPS (Systems Engineering Initiative for Patient Safety) model of work system and patient safety is a human factors systems approach that has been successfully applied in healthcare research and practice. Several research and practical applications of the SEIPS model are described. Important implications of the SEIPS model for healthcare system and process redesign are highlighted. Principles for redesigning healthcare systems using the SEIPS model are described. Balancing the work system and encouraging the active and adaptive role of workers are key principles for improving healthcare quality and patient safety. PMID:23845724

A New Dual-purpose Quality Control Dosimetry Protocol for Diagnostic Reference-level Determination in Computed Tomography.

PubMed

Sohrabi, Mehdi; Parsi, Masoumeh; Sina, Sedigheh

2018-05-17

A diagnostic reference level is an advisory dose level set by a regulatory authority in a country as an efficient criterion for protection of patients from unwanted medical exposure. In computed tomography, the direct dose measurement and data collection methods are commonly applied for determination of diagnostic reference levels. Recently, a new quality-control-based dose survey method was proposed by the authors to simplify the diagnostic reference-level determination using a retrospective quality control database usually available at a regulatory authority in a country. In line with such a development, a prospective dual-purpose quality control dosimetry protocol is proposed for determination of diagnostic reference levels in a country, which can be simply applied by quality control service providers. This new proposed method was applied to five computed tomography scanners in Shiraz, Iran, and diagnostic reference levels for head, abdomen/pelvis, sinus, chest, and lumbar spine examinations were determined. The results were compared to those obtained by the data collection and quality-control-based dose survey methods, carried out in parallel in this study, and were found to agree well within approximately 6%. This is highly acceptable for quality-control-based methods according to International Atomic Energy Agency tolerance levels (±20%).

Results of a Research Evaluating Quality of Computer Science Education

ERIC Educational Resources Information Center

Záhorec, Ján; Hašková, Alena; Munk, Michal

2012-01-01

The paper presents the results of an international research on a comparative assessment of the current status of computer science education at the secondary level (ISCED 3A) in Slovakia, the Czech Republic, and Belgium. Evaluation was carried out based on 14 specific factors gauging the students' point of view. The authors present qualitative…

The Role of Parents and Related Factors on Adolescent Computer Use

PubMed Central

Epstein, Jennifer A.

2012-01-01

Background Research suggested the importance of parents on their adolescents’ computer activity. Spending too much time on the computer for recreational purposes in particular has been found to be related to areas of public health concern in children/adolescents, including obesity and substance use. Design and Methods The goal of the research was to determine the association between recreational computer use and potentially linked factors (parental monitoring, social influences to use computers including parents, age of first computer use, self-control, and particular internet activities). Participants (aged 13-17 years and residing in the United States) were recruited via the Internet to complete an anonymous survey online using a survey tool. The target sample of 200 participants who completed the survey was achieved. The sample’s average age was 16 and was 63% girls. Results A set of regressions with recreational computer use as dependent variables were run. Conclusions Less parental monitoring, younger age at first computer use, listening or downloading music from the internet more frequently, using the internet for educational purposes less frequently, and parent’s use of the computer for pleasure were related to spending a greater percentage of time on non-school computer use. These findings suggest the importance of parental monitoring and parental computer use on their children’s own computer use, and the influence of some internet activities on adolescent computer use. Finally, programs aimed at parents to help them increase the age when their children start using computers and learn how to place limits on recreational computer use are needed. PMID:25170449

Relationship factors and quality among mixed-orientation couples.

PubMed

Kays, Jill L; Yarhouse, Mark A; Ripley, Jennifer S

2014-01-01

Mixed-orientation couples are defined as a heterosexual couple in which 1 partner experiences same-sex attraction and the other does not. Despite the fact that there is a sizable number of mixed-orientation couples in the U.S. adult population, few researchers have studied this population, and thus, there is limited understanding of these relationships. The authors examined the degree to which relationship commitment, partner-focused forgivingness, and marital values were associated with relationship quality, and how these variables predicted relationship quality. The total sample (N = 265) consisted of 2 independent samples-105 sexual minorities (i.e., the spouse who experiences same-sex attraction) and 160 heterosexual spouses. The data were not dyadic. Together, commitment, partner-focused forgivingness, and marital values accounted for roughly 43% of the variance in relationship quality. Relationship commitment was found to be the largest single predictor of relationship quality, followed by partner-focused forgivingness. Research and clinical implications are discussed. This study significantly adds to the current research base by quantitatively measuring various variables in these relationships, as well as expanding our understanding of relationship quality in mixed-orientation couples and factors that may play a role.

A Synthesis and Survey of Critical Success Factors for Computer Technology Projects

ERIC Educational Resources Information Center

Baker, Ross A.

2012-01-01

The author investigated the existence of critical success factors for computer technology projects. Current research literature and a survey of experienced project managers indicate that there are 23 critical success factors (CSFs) that correlate with project success. The survey gathered an assessment of project success and the degree to which…

Applications of Computer Vision for Assessing Quality of Agri-food Products: A Review of Recent Research Advances.

PubMed

Ma, Ji; Sun, Da-Wen; Qu, Jia-Huan; Liu, Dan; Pu, Hongbin; Gao, Wen-Hong; Zeng, Xin-An

2016-01-01

With consumer concerns increasing over food quality and safety, the food industry has begun to pay much more attention to the development of rapid and reliable food-evaluation systems over the years. As a result, there is a great need for manufacturers and retailers to operate effective real-time assessments for food quality and safety during food production and processing. Computer vision, comprising a nondestructive assessment approach, has the aptitude to estimate the characteristics of food products with its advantages of fast speed, ease of use, and minimal sample preparation. Specifically, computer vision systems are feasible for classifying food products into specific grades, detecting defects, and estimating properties such as color, shape, size, surface defects, and contamination. Therefore, in order to track the latest research developments of this technology in the agri-food industry, this review aims to present the fundamentals and instrumentation of computer vision systems with details of applications in quality assessment of agri-food products from 2007 to 2013 and also discuss its future trends in combination with spectroscopy.

Computer vision-based analysis of foods: a non-destructive colour measurement tool to monitor quality and safety.

PubMed

Mogol, Burçe Ataç; Gökmen, Vural

2014-05-01

Computer vision-based image analysis has been widely used in food industry to monitor food quality. It allows low-cost and non-contact measurements of colour to be performed. In this paper, two computer vision-based image analysis approaches are discussed to extract mean colour or featured colour information from the digital images of foods. These types of information may be of particular importance as colour indicates certain chemical changes or physical properties in foods. As exemplified here, the mean CIE a* value or browning ratio determined by means of computer vision-based image analysis algorithms can be correlated with acrylamide content of potato chips or cookies. Or, porosity index as an important physical property of breadcrumb can be calculated easily. In this respect, computer vision-based image analysis provides a useful tool for automatic inspection of food products in a manufacturing line, and it can be actively involved in the decision-making process where rapid quality/safety evaluation is needed. © 2013 Society of Chemical Industry.

Sociodemographic factors and the quality of prenatal care.

PubMed Central

Hansell, M J

1991-01-01

BACKGROUND: In this study, maternal sociodemographic factors are examined in relationship to the quality of prenatal health services US women receive. METHODS: Data from the 1980 National Natality Survey and 1980 Fetal Mortality Survey were used for the analysis. Indicator variables for prenatal care quality are the percentages of prenatal visits at which blood pressure and urine were tested, the performance of hemoglobin or hematocrit tests, and the presence or absence of advice regarding salt restriction and diuretics usage during pregnancy. RESULTS: Distribution of the basic examinations in prenatal care vary according to marital status, parity, education, and residence in a metropolitan or nonmetropolitan county. The advice received concerning salt and diuretics usage was also influenced by sociodemographic variables. CONCLUSIONS: The analyses reveal that prenatal care is not of even minimally acceptable quality for many women. PMID:1953875

Understanding and preventing computer vision syndrome.

PubMed

Loh, Ky; Redd, Sc

2008-01-01

The invention of computer and advancement in information technology has revolutionized and benefited the society but at the same time has caused symptoms related to its usage such as ocular sprain, irritation, redness, dryness, blurred vision and double vision. This cluster of symptoms is known as computer vision syndrome which is characterized by the visual symptoms which result from interaction with computer display or its environment. Three major mechanisms that lead to computer vision syndrome are extraocular mechanism, accommodative mechanism and ocular surface mechanism. The visual effects of the computer such as brightness, resolution, glare and quality all are known factors that contribute to computer vision syndrome. Prevention is the most important strategy in managing computer vision syndrome. Modification in the ergonomics of the working environment, patient education and proper eye care are crucial in managing computer vision syndrome.

Markers of data quality in computer audit: the Manchester Orthopaedic Database.

PubMed

Ricketts, D; Newey, M; Patterson, M; Hitchin, D; Fowler, S

1993-11-01

This study investigates the efficiency of the Manchester Orthopaedic Database (MOD), a computer software package for record collection and audit. Data is entered into the system in the form of diagnostic, operative and complication keywords. We have calculated the completeness, accuracy and quality (completeness x accuracy) of keyword data in the MOD in two departments of orthopaedics (Departments A and B). In each department, 100 sets of inpatient notes were reviewed. Department B obtained results which were significantly better than those in A at the 5% level. We attribute this to the presence of a systems coordinator to motivate and organise the team for audit. Senior and junior staff did not differ significantly with respect to completeness, accuracy and quality measures, but locum junior staff recorded data with a quality of 0%. Statistically, the biggest difference between the departments was the quality of operation keywords. Sample sizes were too small to permit effective statistical comparisons between the quality of complication keywords. In both departments, however, the poorest quality data was seen in complication keywords. The low complication keyword completeness contributed to this; on average, the true complication rate (39%) was twice the recorded complication rate (17%). In the recent Royal College of Surgeons of England Confidential Comparative Audit, the recorded complication rate was 4.7%. In the light of the above findings, we suggest that the true complication rate of the RCS CCA should approach 9%.

Guidelines and standard procedures for continuous water-quality monitors: Station operation, record computation, and data reporting

USGS Publications Warehouse

Wagner, Richard J.; Boulger, Robert W.; Oblinger, Carolyn J.; Smith, Brett A.

2006-01-01

The U.S. Geological Survey uses continuous water-quality monitors to assess the quality of the Nation's surface water. A common monitoring-system configuration for water-quality data collection is the four-parameter monitoring system, which collects temperature, specific conductance, dissolved oxygen, and pH data. Such systems also can be configured to measure other properties, such as turbidity or fluorescence. Data from sensors can be used in conjunction with chemical analyses of samples to estimate chemical loads. The sensors that are used to measure water-quality field parameters require careful field observation, cleaning, and calibration procedures, as well as thorough procedures for the computation and publication of final records. This report provides guidelines for site- and monitor-selection considerations; sensor inspection and calibration methods; field procedures; data evaluation, correction, and computation; and record-review and data-reporting processes, which supersede the guidelines presented previously in U.S. Geological Survey Water-Resources Investigations Report WRIR 00-4252. These procedures have evolved over the past three decades, and the process continues to evolve with newer technologies.

Imaging quality analysis of computer-generated holograms using the point-based method and slice-based method

NASA Astrophysics Data System (ADS)

Zhang, Zhen; Chen, Siqing; Zheng, Huadong; Sun, Tao; Yu, Yingjie; Gao, Hongyue; Asundi, Anand K.

2017-06-01

Computer holography has made a notably progress in recent years. The point-based method and slice-based method are chief calculation algorithms for generating holograms in holographic display. Although both two methods are validated numerically and optically, the differences of the imaging quality of these methods have not been specifically analyzed. In this paper, we analyze the imaging quality of computer-generated phase holograms generated by point-based Fresnel zone plates (PB-FZP), point-based Fresnel diffraction algorithm (PB-FDA) and slice-based Fresnel diffraction algorithm (SB-FDA). The calculation formula and hologram generation with three methods are demonstrated. In order to suppress the speckle noise, sequential phase-only holograms are generated in our work. The results of reconstructed images numerically and experimentally are also exhibited. By comparing the imaging quality, the merits and drawbacks with three methods are analyzed. Conclusions are given by us finally.

A simple parametric model observer for quality assurance in computer tomography

NASA Astrophysics Data System (ADS)

Anton, M.; Khanin, A.; Kretz, T.; Reginatto, M.; Elster, C.

2018-04-01

Model observers are mathematical classifiers that are used for the quality assessment of imaging systems such as computer tomography. The quality of the imaging system is quantified by means of the performance of a selected model observer. For binary classification tasks, the performance of the model observer is defined by the area under its ROC curve (AUC). Typically, the AUC is estimated by applying the model observer to a large set of training and test data. However, the recording of these large data sets is not always practical for routine quality assurance. In this paper we propose as an alternative a parametric model observer that is based on a simple phantom, and we provide a Bayesian estimation of its AUC. It is shown that a limited number of repeatedly recorded images (10–15) is already sufficient to obtain results suitable for the quality assessment of an imaging system. A MATLAB® function is provided for the calculation of the results. The performance of the proposed model observer is compared to that of the established channelized Hotelling observer and the nonprewhitening matched filter for simulated images as well as for images obtained from a low-contrast phantom on an x-ray tomography scanner. The results suggest that the proposed parametric model observer, along with its Bayesian treatment, can provide an efficient, practical alternative for the quality assessment of CT imaging systems.

Deconstructing racial differences: the effects of quality of education and cerebrovascular risk factors.

PubMed

Carvalho, Janessa O; Tommet, Doug; Crane, Paul K; Thomas, Michael L; Claxton, Amy; Habeck, Christian; Manly, Jennifer J; Romero, Heather R

2015-07-01

To evaluate the effects of vascular conditions and education quality on cognition over time in White and African American (AA) older adults. We investigated cross-sectional and longitudinal racial differences in executive functioning (EF) and memory composites among Whites (n = 461) and AAs (n = 118) enrolled in a cohort study. We examined whether cerebrovascular risk factors and Shipley Vocabulary scores (a proxy for education quality) accounted for racial differences. On average, AAs had lower quality of education and more cerebrovascular risk factors including hypertension, diabetes, and obesity. AAs had lower mean EF and memory at baseline, but there were no group differences in rates of decline. Cross-sectional racial differences in EF and memory persisted after controlling for vascular disease, but disappeared when controlling for Shipley Vocabulary. Quality of education appears to be more important than cerebrovascular risk factors in explaining cross-sectional differences in memory and EF performance between White and AA older adults. Further investigation is needed regarding the relative contribution of education quality and cerebrovascular risk factors to cognitive decline among ethnically/racially diverse older adults. © The Author 2014. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

A Study of Quality of Service Communication for High-Speed Packet-Switching Computer Sub-Networks

NASA Technical Reports Server (NTRS)

Cui, Zhenqian

1999-01-01

With the development of high-speed networking technology, computer networks, including local-area networks (LANs), wide-area networks (WANs) and the Internet, are extending their traditional roles of carrying computer data. They are being used for Internet telephony, multimedia applications such as conferencing and video on demand, distributed simulations, and other real-time applications. LANs are even used for distributed real-time process control and computing as a cost-effective approach. Differing from traditional data transfer, these new classes of high-speed network applications (video, audio, real-time process control, and others) are delay sensitive. The usefulness of data depends not only on the correctness of received data, but also the time that data are received. In other words, these new classes of applications require networks to provide guaranteed services or quality of service (QoS). Quality of service can be defined by a set of parameters and reflects a user's expectation about the underlying network's behavior. Traditionally, distinct services are provided by different kinds of networks. Voice services are provided by telephone networks, video services are provided by cable networks, and data transfer services are provided by computer networks. A single network providing different services is called an integrated-services network.

A review of image quality assessment methods with application to computational photography

NASA Astrophysics Data System (ADS)

Maître, Henri

2015-12-01

Image quality assessment has been of major importance for several domains of the industry of image as for instance restoration or communication and coding. New application fields are opening today with the increase of embedded power in the camera and the emergence of computational photography: automatic tuning, image selection, image fusion, image data-base building, etc. We review the literature of image quality evaluation. We pay attention to the very different underlying hypotheses and results of the existing methods to approach the problem. We explain why they differ and for which applications they may be beneficial. We also underline their limits, especially for a possible use in the novel domain of computational photography. Being developed to address different objectives, they propose answers on different aspects, which make them sometimes complementary. However, they all remain limited in their capability to challenge the human expert, the said or unsaid ultimate goal. We consider the methods which are based on retrieving the parameters of a signal, mostly in spectral analysis; then we explore the more global methods to qualify the image quality in terms of noticeable defects or degradation as popular in the compression domain; in a third field the image acquisition process is considered as a channel between the source and the receiver, allowing to use the tools of the information theory and to qualify the system in terms of entropy and information capacity. However, these different approaches hardly attack the most difficult part of the task which is to measure the quality of the photography in terms of aesthetic properties. To help in addressing this problem, in between Philosophy, Biology and Psychology, we propose a brief review of the literature which addresses the problematic of qualifying Beauty, present the attempts to adapt these concepts to visual patterns and initiate a reflection on what could be done in the field of photography.

Aerosolized intranasal midazolam for safe and effective sedation for quality computed tomography imaging in infants and children.

PubMed

Mekitarian Filho, Eduardo; de Carvalho, Werther Brunow; Gilio, Alfredo Elias; Robinson, Fay; Mason, Keira P

2013-10-01

This pilot study introduces the aerosolized route for midazolam as an option for infant and pediatric sedation for computed tomography imaging. This technique produced predictable and effective sedation for quality computed tomography imaging studies with minimal artifact and no significant adverse events. Copyright © 2013 Mosby, Inc. All rights reserved.

Factors affecting quality of life in adults with epilepsy in Taiwan: A cross-sectional, correlational study.

PubMed

Chen, Hsiu-Fang; Tsai, Yun-Fang; Hsi, Mo-Song; Chen, Jui-Chen

2016-05-01

The purpose of this study was to assess eight factors considered important for quality of life in persons with epilepsy in order to determine which of these components affect quality of life in adults with epilepsy in Taiwan. A cross-sectional, correlational study using structured questionnaires assessed 260 patients with epilepsy purposively sampled from a medical center in Northern Taiwan. Health-related quality of life (HRQoL) was evaluated with the Quality of Life in Epilepsy-31 (QOLIE-31) questionnaire. Data also included personal and health-related characteristics, knowledge of epilepsy, efficacy in the self-management of epilepsy, and social support. Scores for the QOLIE-31 were correlated with the following factors: (1) demographic characteristics of age, gender, and income; (2) sleep quality; (3) symptoms of anxiety and depression; (4) epilepsy-specific variables: seizure frequency; types, number, and frequency of antiepileptic drugs (AEDs); and adverse events of AEDs; and (5) social support. Stepwise regression analysis showed that seven factors were predictive for quality of life: anxiety, depression, adverse events of AEDs, social support, seizure frequency of at least once in three months, household income of NT$ 40,001-100,000, and male gender. These factors accounted for 58.2% of the variance of quality of life. Our study assessed multiple factors in an examination of relationships and predictive factors for quality of life in adults with epilepsy in Taiwan. Knowledge of these contributing factors can assist health-care providers when evaluating patients with epilepsy to help target interventions for improving quality of life. Copyright © 2016 Elsevier Inc. All rights reserved.

Diet quality is inversely related to cardiovascular risk factors in adults

USDA-ARS?s Scientific Manuscript database

The goal of the study was to determine if there was an association between diet quality and cardiovascular risk factors in adults. National Health and Nutrition Examination Survey 2001–2008 data were used to compare diet quality, as determined by using 2005 Healthy Eating Index-2005 scores, and card...

Analysis of stationary availability factor of two-level backbone computer networks with arbitrary topology

NASA Astrophysics Data System (ADS)

Rahman, P. A.

2018-05-01

This scientific paper deals with the two-level backbone computer networks with arbitrary topology. A specialized method, offered by the author for calculation of the stationary availability factor of the two-level backbone computer networks, based on the Markov reliability models for the set of the independent repairable elements with the given failure and repair rates and the methods of the discrete mathematics, is also discussed. A specialized algorithm, offered by the author for analysis of the network connectivity, taking into account different kinds of the network equipment failures, is also observed. Finally, this paper presents an example of calculation of the stationary availability factor for the backbone computer network with the given topology.

Factors associated to quality of life in active elderly.

PubMed

Alexandre, Tiago da Silva; Cordeiro, Renata Cereda; Ramos, Luiz Roberto

2009-08-01

To analyze whether quality of life in active, healthy elderly individuals is influenced by functional status and sociodemographic characteristics, as well as psychological parameters. Study conducted in a sample of 120 active elderly subjects recruited from two open universities of the third age in the cities of São Paulo and São José dos Campos (Southeastern Brazil) between May 2005 and April 2006. Quality of life was measured using the abbreviated Brazilian version of the World Health Organization Quality of Live (WHOQOL-bref) questionnaire. Sociodemographic, clinical and functional variables were measured through crossculturally validated assessments by the Mini Mental State Examination, Geriatric Depression Scale, Functional Reach, One-Leg Balance Test, Timed Up and Go Test, Six-Minute Walk Test, Human Activity Profile and a complementary questionnaire. Simple descriptive analyses, Pearson's correlation coefficient, Student's t-test for non-related samples, analyses of variance, linear regression analyses and variance inflation factor were performed. The significance level for all statistical tests was set at 0.05. Linear regression analysis showed an independent correlation without colinearity between depressive symptoms measured by the Geriatric Depression Scale and four domains of the WHOQOL-bref. Not having a conjugal life implied greater perception in the social domain; developing leisure activities and having an income over five minimum wages implied greater perception in the environment domain. Functional status had no influence on the Quality of Life variable in the analysis models in active elderly. In contrast, psychological factors, as assessed by the Geriatric Depression Scale, and sociodemographic characteristics, such as marital status, income and leisure activities, had an impact on quality of life.

[Associations between dormitory environment/other factors and sleep quality of medical students].

PubMed

Zheng, Bang; Wang, Kailu; Pan, Ziqi; Li, Man; Pan, Yuting; Liu, Ting; Xu, Dan; Lyu, Jun

2016-03-01

To investigate the sleep quality and related factors among medical students in China, understand the association between dormitory environment and sleep quality, and provide evidence and recommendations for sleep hygiene intervention. A total of 555 undergraduate students were selected from a medical school of an university in Beijing through stratified-cluster random-sampling to conduct a questionnaire survey by using Chinese version of Pittsburgh Sleep Quality Index (PSQI) and self-designed questionnaire. Analyses were performed by using multiple logistic regression model as well as multilevel linear regression model. The prevalence of sleep disorder was 29.1%(149/512), and 39.1%(200/512) of the students reported that the sleep quality was influenced by dormitory environment. PSQI score was negatively correlated with self-reported rating of dormitory environment (γs=-0.310, P<0.001). Logistic regression analysis showed the related factors of sleep disorder included grade, sleep regularity, self-rated health status, pressures of school work and employment, as well as dormitory environment. RESULTS of multilevel regression analysis also indicated that perception on dormitory environment (individual level) was associated with sleep quality with the dormitory level random effects under control (b=-0.619, P<0.001). The prevalence of sleep disorder was high in medical students, which was associated with multiple factors. Dormitory environment should be taken into consideration when the interventions are taken to improve the sleep quality of students.

ASVCP quality assurance guidelines: control of general analytical factors in veterinary laboratories.

PubMed

Flatland, Bente; Freeman, Kathy P; Friedrichs, Kristen R; Vap, Linda M; Getzy, Karen M; Evans, Ellen W; Harr, Kendal E

2010-09-01

Owing to lack of governmental regulation of veterinary laboratory performance, veterinarians ideally should demonstrate a commitment to self-monitoring and regulation of laboratory performance from within the profession. In response to member concerns about quality management in veterinary laboratories, the American Society for Veterinary Clinical Pathology (ASVCP) formed a Quality Assurance and Laboratory Standards (QAS) committee in 1996. This committee recently published updated and peer-reviewed Quality Assurance Guidelines on the ASVCP website. The Quality Assurance Guidelines are intended for use by veterinary diagnostic laboratories and veterinary research laboratories that are not covered by the US Food and Drug Administration Good Laboratory Practice standards (Code of Federal Regulations Title 21, Chapter 58). The guidelines have been divided into 3 reports on 1) general analytic factors for veterinary laboratory performance and comparisons, 2) hematology and hemostasis, and 3) clinical chemistry, endocrine assessment, and urinalysis. This report documents recommendations for control of general analytical factors within veterinary clinical laboratories and is based on section 2.1 (Analytical Factors Important In Veterinary Clinical Pathology, General) of the newly revised ASVCP QAS Guidelines. These guidelines are not intended to be all-inclusive; rather, they provide minimum guidelines for quality assurance and quality control for veterinary laboratory testing. It is hoped that these guidelines will provide a basis for laboratories to assess their current practices, determine areas for improvement, and guide continuing professional development and education efforts. ©2010 American Society for Veterinary Clinical Pathology.

Upper extremities and spinal musculoskeletal disorders and risk factors in students using computers

PubMed Central

Calik, Bilge Basakci; Yagci, Nesrin; Gursoy, Suleyman; Zencir, Mehmet

2014-01-01

Objective: To examine the effects of computer usage on the musculoskeletal system discomforts (MSD) of Turkish university students, the possible risk factors and study implications (SI). Methods: The study comprised a total of 871 students. Demographic information was recorded and the Student Specific Cornell Musculoskeletal Discomfort Questionnaire (SsCMDQ) was used to evaluate musculoskeletal system discomforts. Results: The neck, lower back and upper back areas were determined to be the most affected areas and percentages for SI were 21.6%, 19.3% and 16.3% respectively. Significant differences were found to be daily computer usage time for the lower back, total usage time for the neck, being female and below the age of 21 years (p<0.05) had an increased risk. Conclusions: The neck, lower back and upper back areas were found to be the most affected areas due to computer usage in university students. Risk factors for MSD were seen to be daily and total computer usage time, female gender and age below 21 years and these were deemed to cause study interference PMID:25674139

Personal and macro-systemic factors as predictors of quality of life in chronic schizophrenia.

PubMed

Fontanil-Gómez, Yolanda; Alcedo Rodríguez, María A; Gutiérrez López, María I

2017-05-01

The goal of this research was to establish possible predictive factors for both subjective and externally assessed quality of life in people with chronic schizophrenia. Sixty-eight people with schizophrenia took part in the study and were assessed using the World Health Organisation Quality of Life Assessment - Brief Version (WHOQOL-BREF), the Quality of Life Scale (QLS), the Positive and Negative Syndrome Scale for Schizophrenia (PANSS), the Global Assessment of Functioning (GAF), the Social Functioning Scale (SFS) tests. Correlations and multiple regression analysis were conducted to determine possible predictors of quality of life. The residential environment (rural/urban), diagnosis, age at onset of disorder, global functioning and social functioning explained 68% of the total variance based on proxies’ assessment quality of life. Living arrangements and social functioning emerged as predictor variables for subjective quality of life, explaining a 47.3% of the total variance. Socio-cultural factors, such as social integration or the quality of interpersonal relationships, have more influence on these peoples’ physical and psychological health than certain personal factors, such as psychopathology. It is therefore advisable to pay attention to the environment and macro-systemic variables when developing intervention plans to improve their quality of life.

Explanation of the computer listings of Faraday factors for INTASAT users

NASA Technical Reports Server (NTRS)

Nesterczuk, G.; Llewellyn, S. K.; Bent, R. B.; Schmid, P. E.

1974-01-01

Using a simplified form of the Appleton-Hartree formula for the phase refractive index, a relationship was obtained between the Faraday rotation angle along the angular path and the total electron content along the vertical path, intersecting the angular at the height of maximum electron density. Using the second mean value theorem of integration, the function B cosine theta second chi was removed from under the integral sign and replaced by a 'mean' value. The mean value factors were printed on the computer listing for 39 stations receiving signals from the INTASAT satellite during the specified time period. The data is presented by station and date. Graphs are included to demonstrate the variation of the Faraday factor with local time and season, with magnetic latitude, elevation and azimuth angles. Other topics discussed include a description of the bent ionospheric model, the earth's magnetic field model, and the sample computer listing.

Factors controlling reservoir quality in tertiary sandstones and their significance to geopressured geothermal production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loucks, R.G.; Richmann, D.L.; Milliken, K.L.

1981-01-01

Variable intensity of diagenesis is the factor primarily responsible for contrasting regional reservoir quality of Tertiary sandstones from the upper and lower Texas coast. Detailed comparison of Frio sandstone from the Chocolate Bayou/Danbury Dome area, Brazoria County, and Vicksburg sandstones from the McAllen Ranch Field area, Hidalgo County, reveals that extent of diagenetic modification is most strongly influenced by (1) detrital mineralogy and (2) regional geothermal gradients. The regional reservoir quality of Frio sandstones from Brazoria County is far better than that characterizing Vicksburg sandstones from Hidalgo County, especially at depths suitable for geopressured geothermal energy production. However, in predictingmore » reservoir quality on a site-specific basis, locally variable factors such as relative proportions for porosity types, pore geometry as related to permeability, and local depositional environment must also be considered. Even in an area of regionally favorable reservoir quality, such local factors can significantly affect reservoir quality and, hence, the geothermal production potential of a specific sandstone unit.« less

Factors associated with the quality of life of nursing home residents in Hong Kong.

PubMed

Lai, C K Y; Leung, D D M; Kwong, E W Y; Lee, R L P

2015-03-01

The quality of life of nursing home residents has increasingly become an important dimension when evaluating care in a nursing home. Not a lot is known about the quality of life of nursing home residents in Hong Kong. To investigate factors associated with the quality of life of nursing home residents to inform care management policies and service delivery. This study reports data from 125 nursing home residents. The Hong Kong Chinese version of the World Health Organization's Quality of Life-Brief version was used. Other measures used include the Mini-Mental State Examination, the Mini-Nutritional Assessment, the Geriatric Depression Scale, the Modified STRATIFY Falls Prediction Tool and the Modified Barthel Index. A univariate analysis and a multiple regression analysis were then performed to identify the influencing factors. The participants reported a moderate level of quality of life, with the exception in the domain of social relationships. A univariate analysis found some associations between demographic and clinical characteristics and quality of life. A multiple regression analysis indicated that pain, being younger (65-74 years), having son(s) or daughter(s), and cognitive impairment were negatively associated factors. The smallness of the sample from a single study site limits the generalizability of the findings. This study provides information that has hitherto been lacking on the quality of life and associated factors among local nursing home residents in Hong Kong. The preliminary findings can help healthcare staff to identify those at risk of suffering from a low quality of life and to design appropriate care interventions to improve the quality of life of such residents. Adequate pain relief, family connectedness and special attention to the needs of those with cognitive impairment are important considerations in ensuring a better quality of life for older people in long-term residential care. © 2014 International Council of Nurses.

Evaluation of Effective Parameters on Quality of Magnetic Resonance Imaging-computed Tomography Image Fusion in Head and Neck Tumors for Application in Treatment Planning.

PubMed

Shirvani, Atefeh; Jabbari, Keyvan; Amouheidari, Alireza

2017-01-01

In radiation therapy, computed tomography (CT) simulation is used for treatment planning to define the location of tumor. Magnetic resonance imaging (MRI)-CT image fusion leads to more efficient tumor contouring. This work tried to identify the practical issues for the combination of CT and MRI images in real clinical cases. The effect of various factors is evaluated on image fusion quality. In this study, the data of thirty patients with brain tumors were used for image fusion. The effect of several parameters on possibility and quality of image fusion was evaluated. These parameters include angles of the patient's head on the bed, slices thickness, slice gap, and height of the patient's head. According to the results, the first dominating factor on quality of image fusion was the difference slice gap between CT and MRI images (cor = 0.86, P < 0.005) and second factor was the angle between CT and MRI slice in the sagittal plane (cor = 0.75, P < 0.005). In 20% of patients, this angle was more than 28° and image fusion was not efficient. In 17% of patients, difference slice gap in CT and MRI was >4 cm and image fusion quality was <25%. The most important problem in image fusion is that MRI images are taken without regard to their use in treatment planning. In general, parameters related to the patient position during MRI imaging should be chosen to be consistent with CT images of the patient in terms of location and angle.

Evaluation of Effective Parameters on Quality of Magnetic Resonance Imaging-computed Tomography Image Fusion in Head and Neck Tumors for Application in Treatment Planning

PubMed Central

Shirvani, Atefeh; Jabbari, Keyvan; Amouheidari, Alireza

2017-01-01

Background: In radiation therapy, computed tomography (CT) simulation is used for treatment planning to define the location of tumor. Magnetic resonance imaging (MRI)-CT image fusion leads to more efficient tumor contouring. This work tried to identify the practical issues for the combination of CT and MRI images in real clinical cases. The effect of various factors is evaluated on image fusion quality. Materials and Methods: In this study, the data of thirty patients with brain tumors were used for image fusion. The effect of several parameters on possibility and quality of image fusion was evaluated. These parameters include angles of the patient's head on the bed, slices thickness, slice gap, and height of the patient's head. Results: According to the results, the first dominating factor on quality of image fusion was the difference slice gap between CT and MRI images (cor = 0.86, P < 0.005) and second factor was the angle between CT and MRI slice in the sagittal plane (cor = 0.75, P < 0.005). In 20% of patients, this angle was more than 28° and image fusion was not efficient. In 17% of patients, difference slice gap in CT and MRI was >4 cm and image fusion quality was <25%. Conclusion: The most important problem in image fusion is that MRI images are taken without regard to their use in treatment planning. In general, parameters related to the patient position during MRI imaging should be chosen to be consistent with CT images of the patient in terms of location and angle. PMID:29387672

Factors associated with high-quality/low-cost hospital performance.

PubMed

Jiang, H Joanna; Friedman, Bernard; Begun, James W

2006-01-01

This study explores organizational and market characteristics associated with superior hospital performance in both quality and cost of care, using the Healthcare Cost and Utilization Project State Inpatient Databases for ten states in 1997 and 2001. After controlling for a variety of patient factors, we found that for-profit ownership, hospital competition, and the number of HMOs were positively associated with the likelihood of attaining high-quality/low-cost performance. Furthermore, we examined interactions between organizational and market characteristics and identified a number of significant interactions. For example, the positive likelihood associated with for-profit hospitals diminished in markets with high HMO penetration.

A case study of view-factor rectification procedures for diffuse-gray radiation enclosure computations

NASA Technical Reports Server (NTRS)

Taylor, Robert P.; Luck, Rogelio

1995-01-01

The view factors which are used in diffuse-gray radiation enclosure calculations are often computed by approximate numerical integrations. These approximately calculated view factors will usually not satisfy the important physical constraints of reciprocity and closure. In this paper several view-factor rectification algorithms are reviewed and a rectification algorithm based on a least-squares numerical filtering scheme is proposed with both weighted and unweighted classes. A Monte-Carlo investigation is undertaken to study the propagation of view-factor and surface-area uncertainties into the heat transfer results of the diffuse-gray enclosure calculations. It is found that the weighted least-squares algorithm is vastly superior to the other rectification schemes for the reduction of the heat-flux sensitivities to view-factor uncertainties. In a sample problem, which has proven to be very sensitive to uncertainties in view factor, the heat transfer calculations with weighted least-squares rectified view factors are very good with an original view-factor matrix computed to only one-digit accuracy. All of the algorithms had roughly equivalent effects on the reduction in sensitivity to area uncertainty in this case study.

Individual and work-related risk factors for musculoskeletal pain: a cross-sectional study among Estonian computer users.

PubMed

Oha, Kristel; Animägi, Liina; Pääsuke, Mati; Coggon, David; Merisalu, Eda

2014-05-28

Occupational use of computers has increased rapidly over recent decades, and has been linked with various musculoskeletal disorders, which are now the most commonly diagnosed occupational diseases in Estonia. The aim of this study was to assess the prevalence of musculoskeletal pain (MSP) by anatomical region during the past 12 months and to investigate its association with personal characteristics and work-related risk factors among Estonian office workers using computers. In a cross-sectional survey, the questionnaires were sent to the 415 computer users. Data were collected by self-administered questionnaire from 202 computer users at two universities in Estonia. The questionnaire asked about MSP at different anatomical sites, and potential individual and work related risk factors. Associations with risk factors were assessed by logistic regression. Most respondents (77%) reported MSP in at least one anatomical region during the past 12 months. Most prevalent was pain in the neck (51%), followed by low back pain (42%), wrist/hand pain (35%) and shoulder pain (30%). Older age, right-handedness, not currently smoking, emotional exhaustion, belief that musculoskeletal problems are commonly caused by work, and low job security were the statistically significant risk factors for MSP in different anatomical sites. A high prevalence of MSP in the neck, low back, wrist/arm and shoulder was observed among Estonian computer users. Psychosocial risk factors were broadly consistent with those reported from elsewhere. While computer users should be aware of ergonomic techniques that can make their work easier and more comfortable, presenting computer use as a serious health hazard may modify health beliefs in a way that is unhelpful.

An approach to quality and performance control in a computer-assisted clinical chemistry laboratory.

PubMed Central

Undrill, P E; Frazer, S C

1979-01-01

A locally developed, computer-based clinical chemistry laboratory system has been in operation since 1970. This utilises a Digital Equipment Co Ltd PDP 12 and an interconnected PDP 8/F computer. Details are presented of the performance and quality control techniques incorporated into the system. Laboratory performance is assessed through analysis of results from fixed-level control sera as well as from cumulative sum methods. At a simple level the presentation may be considered purely indicative, while at a more sophisticated level statistical concepts have been introduced to aid the laboratory controller in decision-making processes. PMID:438340

Quench-Induced Degradation of the Quality Factor in Superconducting Resonators

NASA Astrophysics Data System (ADS)

Checchin, M.; Martinello, M.; Romanenko, A.; Grassellino, A.; Sergatskov, D. A.; Posen, S.; Melnychuk, O.; Zasadzinski, J. F.

2016-04-01

Quench of superconducting radio-frequency cavities frequently leads to the lowered quality factor Q0 , which had been attributed to the additional trapped magnetic flux. Here we demonstrate that the origin of this magnetic flux is purely extrinsic to the cavity by showing no extra dissipation (unchanged Q0) after quenching in zero magnetic field, which allows us to rule out intrinsic mechanisms of flux trapping such as generation of thermal currents or trapping of the rf field. We also show the clear relation of dissipation introduced by quenching to the orientation of the applied magnetic field and the possibility to fully recover the quality factor by requenching in the compensated field. We discover that for larger values of the ambient field, the Q -factor degradation may become irreversible by this technique, likely due to the outward flux migration beyond the normal zone opening during quench. Our findings are of special practical importance for accelerators based on low- and medium-β accelerating structures residing close to focusing magnets, as well as for all high-Q cavity-based accelerators.

Listening Strategy Use and Influential Factors in Web-Based Computer Assisted Language Learning

ERIC Educational Resources Information Center

Chen, L.; Zhang, R.; Liu, C.

2014-01-01

This study investigates second and foreign language (L2) learners' listening strategy use and factors that influence their strategy use in a Web-based computer assisted language learning (CALL) system. A strategy inventory, a factor questionnaire and a standardized listening test were used to collect data from a group of 82 Chinese students…

Study of motivational factors in doctors in respect of healthcare quality improvement.

PubMed

Smiianov, Vladyslav A; Smiianova, Olga I; Gruzieva, Tetiana S; Vygivska, Liudmyla; Rudenko, Lesia A

The article presents the results of a survey among doctors with different certification categories and experience who work at inpatient and outpatient departments of Sumy healthcare institutions, in respect of the main factors that motivate them to provide quality healthcare. The aim of the study is to identify the factors that may be used as motivators to improve healthcare quality in terms of medical staff in order to ensure system construction of motivational component of healthcare quality management ("incentive picture"). We conducted a survey among physicians working at inpatient and outpatient departments. A total of 167 respondents were interviewed. The obtained results were processed using OCA-program. We have found an association between the salary level and certification category of a physician. Despite heavy workload, most doctors were willing to work harder and better for some additional payment. Even though financial satisfaction was low, most doctors did not agree to change their profession for a more payable one. The study revealed that, in doctors' opinion, the introduction of incentive system in healthcare institutions was necessary to provide quality healthcare. Regardless of length of service and workplace, two of the main motivational factors for doctors were moral satisfaction from work and respect of people.

Winter wheat quality monitoring and forecasting system based on remote sensing and environmental factors

NASA Astrophysics Data System (ADS)

Haiyang, Yu; Yanmei, Liu; Guijun, Yang; Xiaodong, Yang; Dong, Ren; Chenwei, Nie

2014-03-01

To achieve dynamic winter wheat quality monitoring and forecasting in larger scale regions, the objective of this study was to design and develop a winter wheat quality monitoring and forecasting system by using a remote sensing index and environmental factors. The winter wheat quality trend was forecasted before the harvest and quality was monitored after the harvest, respectively. The traditional quality-vegetation index from remote sensing monitoring and forecasting models were improved. Combining with latitude information, the vegetation index was used to estimate agronomy parameters which were related with winter wheat quality in the early stages for forecasting the quality trend. A combination of rainfall in May, temperature in May, illumination at later May, the soil available nitrogen content and other environmental factors established the quality monitoring model. Compared with a simple quality-vegetation index, the remote sensing monitoring and forecasting model used in this system get greatly improved accuracy. Winter wheat quality was monitored and forecasted based on the above models, and this system was completed based on WebGIS technology. Finally, in 2010 the operation process of winter wheat quality monitoring system was presented in Beijing, the monitoring and forecasting results was outputted as thematic maps.

[Factors affecting the quality of cardiopulmonary resuscitation in inpatient units: perception of nurses].

PubMed

Citolino, Clairton Marcos Filho; Santos, Eduesley Santana; Silva, Rita de Cassia Gengo E; Nogueira, Lilia de Souza

2015-12-01

To identify, in the perception of nurses, the factors that affect the quality of cardiopulmonary resuscitation (CPR) in adult inpatient units, and investigate the influence of both work shifts and professional experience length of time in the perception of these factors. A descriptive, exploratory study conducted at a hospital specialized in cardiology and pneumology with the application of a questionnaire to 49 nurses working in inpatient units. The majority of nurses reported that the high number of professionals in the scenario (75.5%), the lack of harmony (77.6%) or stress of any member of staff (67.3%), lack of material and/or equipment failure (57.1%), lack of familiarity with the emergency trolleys (98.0%) and presence of family members at the beginning of the cardiopulmonary arrest assistance (57.1%) are factors that adversely affect the quality of care provided during CPR. Professional experience length of time and the shift of nurses did not influence the perception of these factors. The identification of factors that affect the quality of CPR in the perception of nurses serves as parameter to implement improvements and training of the staff working in inpatient units.

Factors related to quality of life among older adults in Bangladesh: A cross sectional survey.

PubMed

Uddin, Mohammad Abbas; Soivong, Pratum; Lasuka, Duangruedee; Juntasopeepun, Phanida

2017-12-01

This cross-sectional design study aimed to describe quality of life and examine factors related to quality of life among older adults in Bangladesh. Convenience sampling was used to recruit 280 older adults from ten villages in two southern districts. The results demonstrate that the majority of the participants reported an overall moderate score of quality of life. Moreover, participants' sleep problems, depression, religiosity, and activities of daily living were negatively correlated with quality of life whereas social support and health service availability were positively correlated with quality of life. Implementing intervention programs upon the significant related factors to improve older adults' quality of life is recommended. © 2017 John Wiley & Sons Australia, Ltd.

Association between socioeconomic factors and sleep quality in an urban population-based sample in Germany.

PubMed

Anders, Markus P; Breckenkamp, Jürgen; Blettner, Maria; Schlehofer, Brigitte; Berg-Beckhoff, Gabriele

2014-12-01

Good sleep quality is essential for recovery. The risk factors of sleep disorders have been extensively investigated, but there is sparse information on the association of socioeconomic factors with a person's sleep quality. The aim of the present analysis is to investigate this association, taking particularly the effect of health confounders into consideration. The data were extracted from the cross-sectional QUEBEB Study. In total, the study sample consisted of 3281 participants (1817 women and 1464 men, aged 16-72 years). Here socioeconomic status (SES) was collected from the baseline survey taken in 2004. Sleep quality for the same participants was measured with in-depth personal interviews in 2006 using the Pittsburgh Sleep Quality Index, together with other relevant characteristics (e.g. anxiety, depression and health status). Multiple logistic regression analyses were performed. People living in an urban environment with a high or medium SES have a greater probability of good sleep quality (odds ratio 1.65, 95% confidence interval 1.27-2.14; odds ratio 1.40, 95% confidence interval 1.16-1.69) than persons with a low SES. Anxiety and depression, but also health status, are also associated with sleep quality and can influence in part the socioeconomic levels seen in sleep quality. SES and sleep quality are associated. However, there are important additional determinants that influence the level of association between SES and sleep quality. Several factors, such as anxiety, depression and health status, are associated with poorer sleep quality, but at the same time, these factors occur more often within lower social classes. © The Author 2013. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

Radiation dose to patients and image quality evaluation from coronary 256-slice computed tomographic angiography

NASA Astrophysics Data System (ADS)

Chen, Liang-Kuang; Wu, Tung-Hsin; Yang, Ching-Ching; Tsai, Chia-Jung; Lee, Jason J. S.

2010-07-01

The aim of this study is to assess radiation dose and the corresponding image quality from suggested CT protocols which depends on different mean heart rate and high heart rate variability by using 256-slice CT. Fifty consecutive patients referred for a cardiac CT examination were included in this study. All coronary computed tomographic angiography (CCTA) examinations were performed on a 256-slice CT scanner with one of five different protocols: retrospective ECG-gating (RGH) with full dose exposure in all R-R intervals (protocol A), RGH of 30-80% pulsing window with tube current modulation (B), RGH of 78±5% pulsing window with tube current modulation (C), prospective ECG-triggering (PGT) of 78% R-R interval with 5% padding window (D) and PGT of 78% R-R interval without padding window (E). Radiation dose parameters and image quality scoring were determined and compared. In this study, no significant differences were found in comparison on image quality of the five different protocols. Protocol A obtained the highest radiation dose comparing with those of protocols B, C, D and E by a factor of 1.6, 2.4, 2.5 and 4.3, respectively ( p<0.001), which were ranged between 2.7 and 11.8 mSv. The PGT could significantly reduce radiation dose delivered to patients, as compared to the RGH. However, the use of PGT has limitations and is only good in assessing cases with lower mean heart rate and stable heart rate variability. With higher mean heart rate and high heart rate variability circumstances, the RGH within 30-80% of R-R interval pulsing window is suggested as a feasible technique for assessing diagnostic performance.

Factors Affecting University Students' Intention to Use Cloud Computing in Jordan

ERIC Educational Resources Information Center

Rababah, Khalid Ali; Khasawneh, Mohammad; Nassar, Bilal

2017-01-01

The aim of this study is to examine the factors affecting students' intention to use cloud computing in the Jordanian universities. To achieve this purpose, a quantitative research approach which is a survey-based was deployed. Around 400 questionnaires were distributed randomly to Information Technology (IT) students at four universities in…

Using animation quality metric to improve efficiency of global illumination computation for dynamic environments

NASA Astrophysics Data System (ADS)

Myszkowski, Karol; Tawara, Takehiro; Seidel, Hans-Peter

2002-06-01

In this paper, we consider applications of perception-based video quality metrics to improve the performance of global lighting computations for dynamic environments. For this purpose we extend the Visible Difference Predictor (VDP) developed by Daly to handle computer animations. We incorporate into the VDP the spatio-velocity CSF model developed by Kelly. The CSF model requires data on the velocity of moving patterns across the image plane. We use the 3D image warping technique to compensate for the camera motion, and we conservatively assume that the motion of animated objects (usually strong attractors of the visual attention) is fully compensated by the smooth pursuit eye motion. Our global illumination solution is based on stochastic photon tracing and takes advantage of temporal coherence of lighting distribution, by processing photons both in the spatial and temporal domains. The VDP is used to keep noise inherent in stochastic methods below the sensitivity level of the human observer. As a result a perceptually-consistent quality across all animation frames is obtained.

Quality of working life of nurses and its related factors.

PubMed

Moradi, Tayebeh; Maghaminejad, Farzaneh; Azizi-Fini, Ismail

2014-06-01

Nurses as the largest group of health care providers should enjoy a satisfactory quality of working life to be able to provide quality care to their patients. Therefore, attention should be paid to the nurses' working life. This study aimed to investigate the quality of nurses' working life in Kashans' hospitals during 2012. This cross-sectional study was conducted on 200 nurses during 2012. The data-gathering instrument consisted of two parts. The first part consisted of questions on demographic information and the second part was the Walton's quality of work life questionnaire. Data were analyzed using the SPSS software. For statistical analysis T test and one way ANOVA were used. The results of the study showed that 60% of nurses reported that they had moderate level of quality of working life while 37.1% and 2% had undesirable and good quality of working life, respectively. Nurses with associate degrees reported a better quality of working life than others. A significant relationship was found between variables such as education level, work experience, and type of hospital with quality of working life score (P < 0.05). No significant differences were observed between quality of working life score of nurses with employment status (P = 0.061), salary (P = 0.052), age, gender and marital status (P > 0.05). Nurses' quality of work life was at the moderate level. As quality of work life has an important impact on attracting and retaining employees, it is necessary to pay more attention to the nurses' quality of work life and its affecting factors.

[Factors Influencing Quality of Life of Alcoholics Anonymous Members in Korea].

PubMed

Yoo, Jae Soon; Lee, Jongeun; Park, Woo Young

2016-04-01

The purpose of this study was to determine quality of life (QOL) related factors in Alcoholics Anonymous (AA) members based on PRECEDE Model. A cross sectional survey was conducted with participants (N =203) from AA meeting in 11 alcohol counsel centers all over South Korea. Data were collected using a specially designed questionnaire based on the PRECEDE model and including QOL, epidemiological factors (including depression and perceived health status), behavioral factors (continuous abstinence and physical health status and practice), predisposing factors (abstinence self-efficacy and self-esteem), reinforcing factors (social capital and family functioning), and enabling factors. Data were analyzed using t-test, one way ANOVA, Tukey HSD test and hierarchical multiple regression analysis with SPSS (ver. 21.0). Of the educational diagnostic variables, self-esteem (β=.23), family functioning (β=.12), abstinence self-efficacy (β=.12) and social capital (β=.11) were strong influential factors in AA members' QOL. In addition, epidemiological diagnostic variables such as depression (β=-.44) and perceived health status (β=.35) were the main factors in QOL. Also, physical health status and practice (β=.106), one of behavioral diagnostic variables was a beneficial factor in QOL. Hierarchical multiple regression analysis showed the determinant variables accounted for 44.0% of the variation in QOL (F=25.76, p<.001). The finding of the study can be used as a framework for planning interventions in order to promote the quality of life of AA members. It is necessary to develop nursing intervention strategies for strengthening educational and epidemiological diagnostic variables in order to improve AA members' QOL.

Optical image encryption via high-quality computational ghost imaging using iterative phase retrieval

NASA Astrophysics Data System (ADS)

Liansheng, Sui; Yin, Cheng; Bing, Li; Ailing, Tian; Krishna Asundi, Anand

2018-07-01

A novel computational ghost imaging scheme based on specially designed phase-only masks, which can be efficiently applied to encrypt an original image into a series of measured intensities, is proposed in this paper. First, a Hadamard matrix with a certain order is generated, where the number of elements in each row is equal to the size of the original image to be encrypted. Each row of the matrix is rearranged into the corresponding 2D pattern. Then, each pattern is encoded into the phase-only masks by making use of an iterative phase retrieval algorithm. These specially designed masks can be wholly or partially used in the process of computational ghost imaging to reconstruct the original information with high quality. When a significantly small number of phase-only masks are used to record the measured intensities in a single-pixel bucket detector, the information can be authenticated without clear visualization by calculating the nonlinear correlation map between the original image and its reconstruction. The results illustrate the feasibility and effectiveness of the proposed computational ghost imaging mechanism, which will provide an effective alternative for enriching the related research on the computational ghost imaging technique.

Identifying and responding to factors that can affect egg quality and appearance

USDA-ARS?s Scientific Manuscript database

Many factors can influence egg quality and appearance. These factors will vary depending upon the housing environment, genetics, drugs, feed ingredients, or chemicals used in agriculture. As egg production methods become more varied—for example, changing from cage to free range—and as layer strains ...

Factors Determining Quality of Care in Family Planning Services in Africa: A Systematic Review of Mixed Evidence

PubMed Central

Tessema, Gizachew Assefa; Streak Gomersall, Judith; Mahmood, Mohammad Afzal; Laurence, Caroline O.

2016-01-01

Background Improving use of family planning services is key to improving maternal health in Africa, and provision of quality of care in family planning services is critical to support higher levels of contraceptive uptake. The objective of this systematic review was to synthesize the available evidence on factors determining the quality of care in family planning services in Africa. Methods Quantitative and qualitative studies undertaken in Africa, published in English, in grey and commercial literature, between 1990 and 2015 were considered. Methodological quality of included studies was assessed using standardized tools. Findings from the quantitative studies were summarized using narrative and tables. Client satisfaction was used to assess the quality of care in family planning services in the quantitative component of the review. Meta-aggregation was used to synthesize the qualitative study findings. Results From 4334 records, 11 studies (eight quantitative, three qualitative) met the review eligibility criteria. The review found that quality of care was influenced by client, provider and facility factors, and structural and process aspects of the facilities. Client’s waiting time, provider competency, provision/prescription of injectable methods, maintaining privacy and confidentiality were the most commonly identified process factors. The quality of stock inventory was the most commonly identified structural factor. The quality of care was also positively associated with privately-owned facilities. The qualitative synthesis revealed additional factors including access related factors such as ‘pre-requisites to be fulfilled by the clients and cost of services, provider workload, and providers’ behaviour. Conclusion There is limited evidence on factors determining quality of care in family planning services in Africa that shows quality of care is influenced by multiple factors. The evidence suggests that lowering access barriers and avoiding unnecessary

An exploration of quality of life and related factors among female flight attendants.

PubMed

Chung, Chi-Ti; Chung, Ue-Lin

2009-09-01

Quality of life is currently an important issue in the medical industry. Many studies have found that shift work affects health and life quality. However, data on quality of life related to female flight attendants are lacking. The purpose of this study was to explore quality of life and related factors such as demographic data, work status, fatigue, sleep quality, and family function as they relate to female flight attendants working on international routes. The study used a cross-sectional research design. A purposive sample of 207 participants was recruited from the Aviation Medical Center. The questionnaire distributed to participants incorporated the Multidimensional Assessment of Fatigue, the Chinese version of the Pittsburgh Sleep Quality Index, the Family Apgar Index, and the Taiwanese version of the WHOQOL-BREF. The mean score for holistic quality of life among participants was 54.49 (SD = 6.48), which ranks at a high-intermediate level. The physical health domain earned the highest mean score and the psychological domain earned the lowest. Results of hierarchical multiple regression analysis using the enter method showed that eight predictors, including religion, drug use, employment status, job stress, job passion, fatigue, sleep quality, and family function, explained 34.2% of variance in holistic quality of life. After controlling for demographics, analysis showed that three variables--fatigue, sleep quality, and family function--accounted for 21.3% of variance in holistic quality of life. Healthcare providers should consider fatigue, sleep quality, and family function factors when planning related health promotion and disease prevention programs for female flight attendants in the future.

Factors contributing to poor sleep quality as perceived by heart transplant recipients in Taiwan.

PubMed

Tseng, P H; Shih, F Jong; Yang, F C; Shih, F Jin; Wang, S S

2014-04-01

The aims of this project were to explore the factors contributing to poor sleep quality at 1 to 3 years after heart transplantation (post-HT), and to explore economic problems and social support for HT recipients (HTRs). This study used a cross-sectional retrospective triangulation approach combining qualitative and quantitative research method designs. Quantitative data included data from the visual analog scale and the Taiwanese version of the World Health Organization Quality of Life questionnaire. Qualitative data were derived from questions that explored physiological, psychological, and economic factors contributing to poor sleep quality postprocedure for HTRs. Sixty-four subjects (81% male, 19% female) participated in this research. Their ages ranged from 20 to 70 (M = 46.88 ± 12.12) years old. Their post-HT timeframe ranged from 1 to 4.10 years; 33% received preoperative extracorporeal membrane oxygenation support. Sleeping disturbances were reported by 72.7% of subjects after HT. Poor sleeping quality at 2 to 3 years post-HT (P = .028) was a complaint, and was worse than at 1 to 2 years post-HT (P = .008). Six physiological (62.5%) and 3 psychological (37.5%) contributing factors were further identified in qualitative interviews. Physiological factors were the major causes affecting their sleep quality 2 to 3 years after HT, whereas psychological factors arose from various family roles, responsibilities, and economic-related pressures. Medical teams should find the causes that lead to sleep disturbances and use the findings to improve HTR sleep quality. When the family financial status is affected, these teams should offer assistance and suggestions for patients who are unable to work due to post-HT physical decline. Establishing and providing good family support systems or patient support groups may allow patients to obtain physical, psychological, and spiritual comfort. Copyright © 2014 Elsevier Inc. All rights reserved.

Piloting Vertical Flight Aircraft: A Conference on Flying Qualities and Human Factors

NASA Technical Reports Server (NTRS)

Blanken, Christopher L. (Editor); Whalley, Matthew S. (Editor)

1993-01-01

This document contains papers from a specialists' meeting entitled 'Piloting Vertical Flight Aircraft: A Conference on Flying Qualities and Human Factors.' Vertical flight aircraft, including helicopters and a variety of Vertical Takeoff and Landing (VTOL) concepts, place unique requirements on human perception, control, and performance for the conduct of their design missions. The intent of this conference was to examine, for these vehicles, advances in: (1) design of flight control systems for ADS-33C standards; (2) assessment of human factors influences of cockpit displays and operational procedures; (3) development of VTOL design and operational criteria; and (4) development of theoretical methods or models for predicting pilot/vehicle performance and mission suitability. A secondary goal of the conference was to provide an initial venue for enhanced interaction between human factors and handling qualities specialists.

Factors that Impact Quality of E-Teaching/Learning Technologies in Higher Education

ERIC Educational Resources Information Center

Daukilas, Sigitas; Kaciniene, Irma; Vaisnoriene, Daiva; Vascila, Vytautas

2008-01-01

The article analyzes and assesses factors that have impact upon the quality of eTeaching/learning technologies in higher education; it is on their basis that the concept of eTeaching/learning quality is denied. Research data about the students' motives in choosing various teaching/learning technologies for the development of their competence are…

High quality factor GaAs microcavity with buried bullseye defects

NASA Astrophysics Data System (ADS)

Winkler, K.; Gregersen, N.; Häyrynen, T.; Bradel, B.; Schade, A.; Emmerling, M.; Kamp, M.; Höfling, S.; Schneider, C.

2018-05-01

The development of high quality factor solid-state microcavities with low mode volumes has paved the way towards on-chip cavity quantum electrodynamics experiments and the development of high-performance nanophotonic devices. Here, we report on the implementation of a new kind of solid-state vertical microcavity, which allows for confinement of the electromagnetic field in the lateral direction without deep etching. The confinement originates from a local elongation of the cavity layer imprinted in a shallow etch and epitaxial overgrowth technique. We show that it is possible to improve the quality factor of such microcavities by a specific in-plane bullseye geometry consisting of a set of concentric rings with subwavelength dimensions. This design results in a smooth effective lateral photonic potential and therefore in a reduction of lateral scattering losses, which makes it highly appealing for experiments in the framework of exciton-polariton physics demanding tight spatial confinement.

Temporal and spatial distribution characteristics and influencing factors of air quality index in Xuchang

NASA Astrophysics Data System (ADS)

Wang, Zhenghua; Tian, Zhihui

2018-01-01

In recent years, the problem of air pollution becomes more and more serious. Based on the geographic and seasonal climatic characteristics of Xuchang City, this paper studies the temporal and spatial distribution characteristics of air quality index. The results show that: from the time point of view, air quality index shows seasonal difference. Air quality index is highest in winter and is lowest in summer. From the space point of view, there are differences between the north and the south to a certain extent. Changge City, Yuzhou city and central Xuchang county is higher than the southeast of Xiangcheng county and Yanling county. The spatial and temporal variation characteristics of air quality index in Xuchang are influenced by natural factors and human activities, and the economic development and population are the important factors affecting the urban air quality.

Requirements for fault-tolerant factoring on an atom-optics quantum computer.

PubMed

Devitt, Simon J; Stephens, Ashley M; Munro, William J; Nemoto, Kae

2013-01-01

Quantum information processing and its associated technologies have reached a pivotal stage in their development, with many experiments having established the basic building blocks. Moving forward, the challenge is to scale up to larger machines capable of performing computational tasks not possible today. This raises questions that need to be urgently addressed, such as what resources these machines will consume and how large will they be. Here we estimate the resources required to execute Shor's factoring algorithm on an atom-optics quantum computer architecture. We determine the runtime and size of the computer as a function of the problem size and physical error rate. Our results suggest that once the physical error rate is low enough to allow quantum error correction, optimization to reduce resources and increase performance will come mostly from integrating algorithms and circuits within the error correction environment, rather than from improving the physical hardware.

Quench-induced degradation of the quality factor in superconducting resonators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Checchin, M.; Martinello, M.; Romanenko, A.

Quench of superconducting radio-frequency cavities frequently leads to the lowered quality factor Q 0, which had been attributed to the additional trapped magnetic flux. Here we demonstrate that the origin of this magnetic flux is purely extrinsic to the cavity by showing no extra dissipation (unchanged Q 0) after quenching in zero magnetic field, which allows us to rule out intrinsic mechanisms of flux trapping such as generation of thermal currents or trapping of the rf field. We also show the clear relation of dissipation introduced by quenching to the orientation of the applied magnetic field and the possibility tomore » fully recover the quality factor by requenching in the compensated field. We discover that for larger values of the ambient field, the Q-factor degradation may become irreversible by this technique, likely due to the outward flux migration beyond the normal zone opening during quench. Lastly, our findings are of special practical importance for accelerators based on low- and medium-beta accelerating structures residing close to focusing magnets, as well as for all high-Q cavity-based accelerators.« less

Quench-induced degradation of the quality factor in superconducting resonators

DOE PAGES

Checchin, M.; Martinello, M.; Romanenko, A.; ...

2016-04-28

Quench of superconducting radio-frequency cavities frequently leads to the lowered quality factor Q 0, which had been attributed to the additional trapped magnetic flux. Here we demonstrate that the origin of this magnetic flux is purely extrinsic to the cavity by showing no extra dissipation (unchanged Q 0) after quenching in zero magnetic field, which allows us to rule out intrinsic mechanisms of flux trapping such as generation of thermal currents or trapping of the rf field. We also show the clear relation of dissipation introduced by quenching to the orientation of the applied magnetic field and the possibility tomore » fully recover the quality factor by requenching in the compensated field. We discover that for larger values of the ambient field, the Q-factor degradation may become irreversible by this technique, likely due to the outward flux migration beyond the normal zone opening during quench. Lastly, our findings are of special practical importance for accelerators based on low- and medium-beta accelerating structures residing close to focusing magnets, as well as for all high-Q cavity-based accelerators.« less

Factors influencing the perceived quality of clinical supervision of occupational therapists in a large Australian state.

PubMed

Martin, Priya; Kumar, Saravana; Lizarondo, Lucylynn; Tyack, Zephanie

2016-10-01

Clinical supervision is important for effective health service delivery, professional development and practice. Despite its importance there is a lack of evidence regarding the factors that improve its quality. This study aimed to investigate the factors that influence the quality of clinical supervision of occupational therapists employed in a large public sector health service covering mental health, paediatrics, adult physical and other practice areas. A mixed method, sequential explanatory study design was used consisting of two phases. This article reports the quantitative phase (Phase One) which involved administration of the Manchester Clinical Supervision Scale (MCSS-26) to 207 occupational therapists. Frequency of supervision sessions, choice of supervisor and the type of supervision were found to be the predictor variables with a positive and significant influence on the quality of clinical supervision. Factors such as age, length of supervision and the area of practice were found to be the predictor variables with a negative and significant influence on the quality of clinical supervision. Factors that influence the perceived quality of clinical supervision among occupational therapists have been identified. High quality clinical supervision is an important component of clinical governance and has been shown to be beneficial to practitioners, patients and the organisation. Information on factors that make clinical supervision effective identified in this study can be added to existing supervision training and practices to improve the quality of clinical supervision. © 2016 Occupational Therapy Australia.

Guidelines and standard procedures for continuous water-quality monitors: Site selection, field operation, calibration, record computation, and reporting

USGS Publications Warehouse

Wagner, Richard J.; Mattraw, Harold C.; Ritz, George F.; Smith, Brett A.

2000-01-01

The U.S. Geological Survey uses continuous water-quality monitors to assess variations in the quality of the Nation's surface water. A common system configuration for data collection is the four-parameter water-quality monitoring system, which collects temperature, specific conductance, dissolved oxygen, and pH data, although systems can be configured to measure other properties such as turbidity or chlorophyll. The sensors that are used to measure these water properties require careful field observation, cleaning, and calibration procedures, as well as thorough procedures for the computation and publication of final records. Data from sensors can be used in conjunction with collected samples and chemical analyses to estimate chemical loads. This report provides guidelines for site-selection considerations, sensor test methods, field procedures, error correction, data computation, and review and publication processes. These procedures have evolved over the past three decades, and the process continues to evolve with newer technologies.

Factors influencing nurse-assessed quality nursing care: A cross-sectional study in hospitals.

PubMed

Liu, Ying; Aungsuroch, Yupin

2018-04-01

To propose a hypothesized theoretical model and apply it to examine the structural relationships among work environment, patient-to-nurse ratio, job satisfaction, burnout, intention to leave and quality nursing care. Improving quality nursing care is a first consideration in nursing management globally. A better understanding of factors influencing quality nursing care can help hospital administrators implement effective programmes to improve quality of services. Although certain bivariate correlations have been found between selected factors and quality nursing care in different study models, no studies have examined the relationships among work environment, patient-to-nurse ratio, job satisfaction, burnout, intention to leave and quality nursing care in a more comprehensive theoretical model. A cross-sectional survey. The questionnaires were collected from 510 Chinese nurses in four Chinese tertiary hospitals in January 2015. The validity and internal consistency reliability of research instruments were evaluated. Structural equation modelling was used to test a theoretical model. The findings revealed that the data supported the theoretical model. Work environment had a large total effect size on quality nursing care. Burnout largely and directly influenced quality nursing care, which was followed by work environment and patient-to-nurse ratio. Job satisfaction indirectly affected quality nursing care through burnout. This study shows how work environment past burnout and job satisfaction influences quality nursing care. Apart from nurses' work conditions of work environment and patient-to-nurse ratio, hospital administrators should pay more attention to nurse outcomes of job satisfaction and burnout when designing intervention programmes to improve quality nursing care. © 2017 John Wiley & Sons Ltd.

The Impact of an Interactive Computer Game on the Quality of Life of Children Undergoing Chemotherapy.

PubMed

Fazelniya, Zahra; Najafi, Mostafa; Moafi, Alireza; Talakoub, Sedigheh

2017-01-01

Quality of life (QOL) of children with cancer reduces right from the diagnosis of disease and the start of treatment. Computer games in medicine are utilized to interact with patients and to improve their health-related behaviors. This study aimed to investigate the effect of an interactive computer game on the QOL of children undergoing chemotherapy. In this clinical trial, 64 children with cancer aged between 8 and12 years were selected through convenience sampling and randomly assigned to experimental or control group. The experimental group played a computer game for 3 hours a week for 4 consecutive weeks and the control group only received routine care. The data collection tool was the Pediatric Quality of Life Inventory (PedsQL) 3.0 Cancer Module Child self-report designed for children aged between 8 to 12 years. Data were analyzed using descriptive and inferential statistics in SPSS software. Before intervention, there was no significant difference between the two groups in terms of mean total QOL score ( p = 0.87). However, immediately after the intervention ( p = 0.02) and 1 month after the intervention ( p < 0.001), the overall mean QOL score was significantly higher in the intervention group than the control group. Based on the findings, computer games seem to be effective as a tool in influencing health-related behavior and improving the QOL of children undergoing chemotherapy. Therefore, according to the findings of this study, computer games can be used to improve the QOL of children undergoing chemotherapy.

The Impact of an Interactive Computer Game on the Quality of Life of Children Undergoing Chemotherapy

PubMed Central

Fazelniya, Zahra; Najafi, Mostafa; Moafi, Alireza; Talakoub, Sedigheh

2017-01-01

Background: Quality of life (QOL) of children with cancer reduces right from the diagnosis of disease and the start of treatment. Computer games in medicine are utilized to interact with patients and to improve their health-related behaviors. This study aimed to investigate the effect of an interactive computer game on the QOL of children undergoing chemotherapy. Materials and Methods: In this clinical trial, 64 children with cancer aged between 8 and12 years were selected through convenience sampling and randomly assigned to experimental or control group. The experimental group played a computer game for 3 hours a week for 4 consecutive weeks and the control group only received routine care. The data collection tool was the Pediatric Quality of Life Inventory (PedsQL) 3.0 Cancer Module Child self-report designed for children aged between 8 to 12 years. Data were analyzed using descriptive and inferential statistics in SPSS software. Results: Before intervention, there was no significant difference between the two groups in terms of mean total QOL score (p = 0.87). However, immediately after the intervention (p = 0.02) and 1 month after the intervention (p < 0.001), the overall mean QOL score was significantly higher in the intervention group than the control group. Conclusions: Based on the findings, computer games seem to be effective as a tool in influencing health-related behavior and improving the QOL of children undergoing chemotherapy. Therefore, according to the findings of this study, computer games can be used to improve the QOL of children undergoing chemotherapy. PMID:29184580

Evaluating Computational Gene Ontology Annotations.

PubMed

Škunca, Nives; Roberts, Richard J; Steffen, Martin

2017-01-01

Two avenues to understanding gene function are complementary and often overlapping: experimental work and computational prediction. While experimental annotation generally produces high-quality annotations, it is low throughput. Conversely, computational annotations have broad coverage, but the quality of annotations may be variable, and therefore evaluating the quality of computational annotations is a critical concern.In this chapter, we provide an overview of strategies to evaluate the quality of computational annotations. First, we discuss why evaluating quality in this setting is not trivial. We highlight the various issues that threaten to bias the evaluation of computational annotations, most of which stem from the incompleteness of biological databases. Second, we discuss solutions that address these issues, for example, targeted selection of new experimental annotations and leveraging the existing experimental annotations.

Factors Affecting Quality of Laboratory Services in Public and Private Health Facilities in Addis Ababa, Ethiopia.

PubMed

Mesfin, Eyob Abera; Taye, Binyam; Belay, Getachew; Ashenafi, Aytenew; Girma, Veronica

2017-10-01

Quality laboratory service is an essential component of health care system but in Sub-Saharan Africa such as Ethiopia, laboratories quality system remains weak due to several factors and it needs more attention to strengthen its capacity and quality system. A cross sectional study was conducted using a questionnaire to assess factors affecting the quality of laboratory service at private and public health institutions in Addis Ababa. A total of 213 laboratory professionals participated in the study and 131 (61.5%) participants had bachelor degree. Majority, 133 (62.4%), of the professionals did not attend any work related training. Seventy five (35.2%) respondents believed that their laboratories did not provide quality laboratory services and the major reported factors affecting provision of quality services were shortage of resources (64.3%), poor management support (57.3%), poor equipment quality (53.4%), high workload (41.1%), lack of equipment calibration (38.3%) and lack of knowledge (23.3%). Moreover logistic regression analysis showed that provision of quality laboratory service was significantly associated with result verification (AOR=9.21, 95% CI=2.26, 37.48), internal quality control (AOR= 6.11, 95% CI=2.11, 17.70), turnaround time (AOR=5.11, 95% CI=1.94, 13.46), shortage of equipment (AOR=7.76, 95% CI=2.55, 23.66), communication with clinicians (AOR=3.24, 95% CI=1.25, 8.41) and lack of job description (AOR=3.67, 95% CI=1.319, 10.22). In conclusion, the major factors that affecting the quality of laboratory service were associated with poor human resource management, poor resources provision, poor management commitment, ineffective communication system and lack of well-established quality management system.

Factors Affecting Utilization of Information Output of Computer-Based Modeling Procedures in Local Government Organizations.

ERIC Educational Resources Information Center

Komsky, Susan

Fiscal Impact Budgeting Systems (FIBS) are sophisticated computer based modeling procedures used in local government organizations, whose results, however, are often overlooked or ignored by decision makers. A study attempted to discover the reasons for this situation by focusing on four factors: potential usefulness, faith in computers,…

Impact Factor? Shmimpact Factor!

PubMed Central

2007-01-01

The journal impact factor is a measure of the citability of articles published in that journal—the more citations generated, the more important that article is considered to be, and as a consequence the prestige of the journal is enhanced. The impact factor is not without controversy, and it can be manipulated. It no longer dominates the choices of journals to search for information. Online search engines, such as PubMed, can locate articles of interest in seconds across journals regardless of high or low impact factors. Editors desiring to increase their influence will need to focus on a fast and friendly submission and review process, early online and speedy print publication, and encourage the rapid turnaround of high-quality peer reviews. Authors desiring to have their results known to the world have never had it so good—the internet permits anyone with computer access to find the author's work. PMID:20806031

Strong Photoluminescence Enhancement in All-Dielectric Fano Metasurface with High Quality Factor.

PubMed

Yuan, Shuai; Qiu, Xingzhi; Cui, Chengcong; Zhu, Liangqiu; Wang, Yuxi; Li, Yi; Song, Jinwen; Huang, Qingzhong; Xia, Jinsong

2017-11-28

All-dielectric metamaterials offer great flexibility for controlling light-matter interaction, owing to their strong electric and magnetic resonances with negligible loss at wavelengths above the material bandgap. Here, we propose an all-dielectric asymmetric metasurface structure exhibiting high quality factor and prominent Fano line shape. Over three-orders photoluminescence enhancement is demonstrated in the fabricated all-dielectric metasurface with record-high quality factor of 1011. We find this strong emission enhancement is attributed to the coherent Fano resonances, which originate from the destructive interferences of antisymmetric displacement currents in the asymmetric all-dielectric metasurface. Our observations show a promising approach to realize light emitters based on all-dielectric metasurfaces.

Factors Influencing F/OSS Cloud Computing Software Product Success: A Quantitative Study

ERIC Educational Resources Information Center

Letort, D. Brian

2012-01-01

Cloud Computing introduces a new business operational model that allows an organization to shift information technology consumption from traditional capital expenditure to operational expenditure. This shift introduces challenges from both the adoption and creation vantage. This study evaluates factors that influence Free/Open Source Software…

Application of factor analysis to the water quality in reservoirs

NASA Astrophysics Data System (ADS)

Silva, Eliana Costa e.; Lopes, Isabel Cristina; Correia, Aldina; Gonçalves, A. Manuela

2017-06-01

In this work we present a Factor Analysis of chemical and environmental variables of the water column and hydro-morphological features of several Portuguese reservoirs. The objective is to reduce the initial number of variables, keeping their common characteristics. Using the Factor Analysis, the environmental variables measured in the epilimnion and in the hypolimnion, together with the hydromorphological characteristics of the dams were reduced from 63 variables to only 13 factors, which explained a total of 83.348% of the variance in the original data. After performing rotation using the Varimax method, the relations between the factors and the original variables got clearer and more explainable, which provided a Factor Analysis model for these environmental variables using 13 varifactors: Water quality and distance to the source, Hypolimnion chemical composition, Sulfite-reducing bacteria and nutrients, Coliforms and faecal streptococci, Reservoir depth, Temperature, Location, among other factors.

Evaluation of the Factors which Contribute to the Ocular Complaints in Computer Users.

PubMed

Agarwal, Smita; Goel, Dishanter; Sharma, Anshu

2013-02-01

Use of information technology hardware given new heights to professional success rate and saves time but on the other hand its harmful effect has introduced an array of health related complaints causing hazards for our human health. Increased use of computers has led to an increase in the number of patients with ocular complaints which are being grouped together as computer vision syndrome (CVS). In view of that, this study was undertaken to find out the ocular complaints and the factors contributing to occurrence of such problems in computer users. To evaluate the factors contributing to Ocular complaints in computer users in Teerthanker Mahaveer University, Moradabad, U.P. India. Community-based cross-sectional study of 150 subjects who work on computer for varying period of time in Teerthanker Mahaveer University, Moradabad, Uttar Pradesh. Two hundred computer operators working in different institutes offices and bank of were selected randomly in Teerthanker Mahaveer University, Moradabad, and Uttar Pradesh. 16 were non responders 18 did not come for assessment and 16 were excluded due to complaints prior to computer use making no response rate Twenty-one did not participate in the study, making the no response rate 25%. Rest of the subjects (n = 150) were asked to fill a pre-tested questionnaire, after obtaining their verbal consent Depending on the average hours of usage in a day, they were categorized into three categories viz. <2 hrs, 2-6 hrs, >6 hrs of usage. All the responders were asked to come to the Ophthalmic OPD for further interview and assessment. Simple proportions and Chi-square test. Among the 150 subjects studied major ocular complaint reported in descending order were eyestrain. (53%). Occurrence of eye strain, ( 53.8%), itching ( 47.6%) and burning (66.7%) in subjects using computer for more than 6 hours. distance from computer screen with respect to eyes, use of antiglare screen, taking frequent breaks, use of LCD monitor and adjustment of

Computer program for determining rotational line intensity factors for diatomic molecules

NASA Technical Reports Server (NTRS)

Whiting, E. E.

1973-01-01

A FORTRAN IV computer program, that provides a new research tool for determining reliable rotational line intensity factors (also known as Honl-London factors), for most electric and magnetic dipole allowed diatomic transitions, is described in detail. This users manual includes instructions for preparing the input data, a program listing, detailed flow charts, and three sample cases. The program is applicable to spin-allowed dipole transitions with either or both states intermediate between Hund's case (a) and Hund's case (b) coupling and to spin-forbidden dipole transitions with either or both states intermediate between Hund's case (c) and Hund's case (b) coupling.

Accelerating an Ordered-Subset Low-Dose X-Ray Cone Beam Computed Tomography Image Reconstruction with a Power Factor and Total Variation Minimization.

PubMed

Huang, Hsuan-Ming; Hsiao, Ing-Tsung

2016-01-01

In recent years, there has been increased interest in low-dose X-ray cone beam computed tomography (CBCT) in many fields, including dentistry, guided radiotherapy and small animal imaging. Despite reducing the radiation dose, low-dose CBCT has not gained widespread acceptance in routine clinical practice. In addition to performing more evaluation studies, developing a fast and high-quality reconstruction algorithm is required. In this work, we propose an iterative reconstruction method that accelerates ordered-subsets (OS) reconstruction using a power factor. Furthermore, we combine it with the total-variation (TV) minimization method. Both simulation and phantom studies were conducted to evaluate the performance of the proposed method. Results show that the proposed method can accelerate conventional OS methods, greatly increase the convergence speed in early iterations. Moreover, applying the TV minimization to the power acceleration scheme can further improve the image quality while preserving the fast convergence rate.

Accelerating an Ordered-Subset Low-Dose X-Ray Cone Beam Computed Tomography Image Reconstruction with a Power Factor and Total Variation Minimization

PubMed Central

Huang, Hsuan-Ming; Hsiao, Ing-Tsung

2016-01-01

In recent years, there has been increased interest in low-dose X-ray cone beam computed tomography (CBCT) in many fields, including dentistry, guided radiotherapy and small animal imaging. Despite reducing the radiation dose, low-dose CBCT has not gained widespread acceptance in routine clinical practice. In addition to performing more evaluation studies, developing a fast and high-quality reconstruction algorithm is required. In this work, we propose an iterative reconstruction method that accelerates ordered-subsets (OS) reconstruction using a power factor. Furthermore, we combine it with the total-variation (TV) minimization method. Both simulation and phantom studies were conducted to evaluate the performance of the proposed method. Results show that the proposed method can accelerate conventional OS methods, greatly increase the convergence speed in early iterations. Moreover, applying the TV minimization to the power acceleration scheme can further improve the image quality while preserving the fast convergence rate. PMID:27073853

Factors Associated with Quality of Life among Hemodialysis Patients in Malaysia

PubMed Central

Md. Yusop, Nor Baizura; Yoke Mun, Chan; Shariff, Zalilah Mohd; Beng Huat, Choo

2013-01-01

Although hemodialysis treatment has greatly increased the life expectancy of end stage renal disease patients, low quality of life among hemodialysis patients is frequently reported. This cross-sectional study aimed to determine the relationship between medical history, hemodialysis treatment and nutritional status with the mental and physical components of quality of life in hemodialysis patients. Respondents (n=90) were recruited from Hospital Kuala Lumpur and dialysis centres of the National Kidney Foundation of Malaysia. Data obtained included socio-demography, medical history, hemodialysis treatment and nutritional status. Mental and physical quality of life were measured using the Mental Composite Summary (MCS) and Physical Composite Summary (PCS) of the Short-Form Health Survey 36-items, a generic core of the Kidney Disease Quality of Life Short Form. Two summary measures and total SF-36 was scored as 0–100, with a higher score indicating better quality of life. Approximately 26 (30%) of respondents achieved the body mass index (24 kg/m2) and more than 80% (n=77) achieved serum albumin level (>35.0 mg/dL) recommended for hemodialysis patients. The majority of respondents did not meet the energy (n=72, 80%) and protein (n=68,75%) recommendations. The total score of SF-36 was 54.1±19.2, while the score for the mental and physical components were 45.0±8.6 and 39.6±8.6, respectively. Factors associated with a higher MCS score were absence of diabetes mellitus (p=0.000) and lower serum calcium (p=0.004), while higher blood flow (p=0.000), higher serum creatinine (p=0.000) and lower protein intake (p=0.006) were associated with a higher PCS score. To improve the overall quality of life of hemodialysis patients, a multidisciplinary intervention that includes medical, dietetic and psychosocial strategies that address factors associated with mental and physical quality of life are warranted to reduce further health complications and to improve quality of life

The effectiveness of computer reminders versus postal reminders for improving quality assessment for point-of-care testing in primary care: a randomized controlled trial.

PubMed

Siersma, Volkert; Kousgaard, Marius Brostrøm; Reventlow, Susanne; Ertmann, Ruth; Felding, Peter; Waldorff, Frans Boch

2015-02-01

This study aimed to evaluate the relative effectiveness of electronic and postal reminders for increasing adherence to the quality assurance programme for the international normalized ratio (INR) point-of-care testing (POCT) device in primary care. All 213 family practices that use the Elective Laboratory of the Capital Region, Denmark, and regularly conduct INR POCT were randomly allocated into two similarly sized groups. During the 4-month intervention, these practices were sent either computer reminders (ComRem) or computer-generated postal reminders (Postal) if they did not perform a split test to check the quality of their INR POCT for each calendar month. The adherence of the practices was tracked during the subsequent 8 months subdivided into two 4-month periods both without intervention. Outcomes were measures of split test procedure adherence. Both interventions were associated with an increase in adherence to the split test procedure - a factor 6.00 [95% confidence interval (CI) 4.46-7.72] and 8.22 [95% CI 5.87-11.52] for ComRem and Postal, respectively - but there is no evidence that one of the interventions was more effective than the other. In the ComRem group, the expected number of split tests (out of four) was 2.54 (95% CI 2.33-2.76) versus 2.44 (95% CI 2.24-2.65) in the Postal group, P = 0.14. There was a slight decrease in adherence over the two follow-ups, but neither intervention was better than the other in achieving a lasting improvement in adherence. Computer reminders are as efficient as postal reminders in increasing adherence to a quality assurance programme for the INR POCT device in primary care. © 2014 John Wiley & Sons, Ltd.

On the potential impact of the newly proposed quality factors on space radiation protection

NASA Technical Reports Server (NTRS)

Wilson, John W.; Townsend, Lawrence W.; Cucinotta, Francis A.

1987-01-01

The recently proposed changes in the defined quality factor hold great potential for easing some of the protection requirements from electrons and protons in the near-Earth environment. At the same time, the high Linear Energy Transfer (LET) components play an even more important role which must be further evaluated. Several recommendations are made which need to be addressed before these new quality factors can be implemented into space radiation potection practice.

Differences in ergonomic and workstation factors between computer office workers with and without reported musculoskeletal pain.

PubMed

Rodrigues, Mirela Sant'Ana; Leite, Raquel Descie Veraldi; Lelis, Cheila Maira; Chaves, Thaís Cristina

2017-01-01

Some studies have suggested a causal relationship between computer work and the development of musculoskeletal disorders. However, studies considering the use of specific tools to assess workplace ergonomics and psychosocial factors in computer office workers with and without reported musculoskeletal pain are scarce. The aim of this study was to compare the ergonomic, physical, and psychosocial factors in computer office workers with and without reported musculoskeletal pain (MSP). Thirty-five computer office workers (aged 18-55 years) participated in the study. The following evaluations were completed: Rapid Upper Limb Assessment (RULA), Rapid Office Strain Assessment (ROSA), and Maastricht Upper Extremity Questionnaire revised Brazilian Portuguese version (MUEQ-Br revised). Student t-tests were used to make comparisons between groups. The computer office workers were divided into two groups: workers with reported MSP (WMSP, n = 17) and workers without positive report (WOMSP, n = 18). Those in the WMSP group showed significantly greater mean values in the total ROSA score (WMSP: 6.71 [CI95% :6.20-7.21] and WOMSP: 5.88 [CI95% :5.37-6.39], p = 0.01). The WMSP group also showed higher scores in the chair section of the ROSA, workstation of MUEQ-Br revised, and in the upper limb RULA score. The chair height and armrest sections from ROSA showed the higher mean values in workers WMSP compared to workers WOMSP. A positive moderate correlation was observed between ROSA and RULA total scores (R = 0.63, p < 0.001). Our results demonstrated that computer office workers who reported MSP had worse ergonomics indexes for chair workstation and worse physical risk related to upper limb (RULA upper limb section) than workers without pain. However, there were no observed differences in workers with and without MSP regarding work-related psychosocial factors. The results suggest that inadequate workstation conditions, specifically the chair height, arm and back

Source-Based Modeling Of Urban Stormwater Quality Response to the Selected Scenarios Combining Future Changes in Climate and Socio-Economic Factors

NASA Astrophysics Data System (ADS)

Borris, Matthias; Leonhardt, Günther; Marsalek, Jiri; Österlund, Heléne; Viklander, Maria

2016-08-01

The assessment of future trends in urban stormwater quality should be most helpful for ensuring the effectiveness of the existing stormwater quality infrastructure in the future and mitigating the associated impacts on receiving waters. Combined effects of expected changes in climate and socio-economic factors on stormwater quality were examined in two urban test catchments by applying a source-based computer model (WinSLAMM) for TSS and three heavy metals (copper, lead, and zinc) for various future scenarios. Generally, both catchments showed similar responses to the future scenarios and pollutant loads were generally more sensitive to changes in socio-economic factors (i.e., increasing traffic intensities, growth and intensification of the individual land-uses) than in the climate. Specifically, for the selected Intermediate socio-economic scenario and two climate change scenarios (RSP = 2.6 and 8.5), the TSS loads from both catchments increased by about 10 % on average, but when applying the Intermediate climate change scenario (RCP = 4.5) for two SSPs, the Sustainability and Security scenarios (SSP1 and SSP3), the TSS loads increased on average by 70 %. Furthermore, it was observed that well-designed and maintained stormwater treatment facilities targeting local pollution hotspots exhibited the potential to significantly improve stormwater quality, however, at potentially high costs. In fact, it was possible to reduce pollutant loads from both catchments under the future Sustainability scenario (on average, e.g., TSS were reduced by 20 %), compared to the current conditions. The methodology developed in this study was found useful for planning climate change adaptation strategies in the context of local conditions.

Quality-of-life factors in adolescent inflammatory bowel disease.

PubMed

MacPhee, M; Hoffenberg, E J; Feranchak, A

1998-02-01

Little is known about the specific psychosocial factors that influence quality of life in adolescents with newly diagnosed inflammatory bowel disease (IBD). We adapted a model by Garrett and Drossman to assess adolescent adjustment to recent-onset IBD. Thirty adolescent-parent pairs completed a set of standardized questionnaires. The inclusion criteria were adolescents 12-18 years of age with Crohn's disease or ulcerative colitis of < 5 years' duration. Adolescents' health-related quality-of-life scores significantly correlated with satisfaction and degree of closeness with their social support members, such as parents. An unexpected finding was that the adolescents included more extended family than peers in their social support networks. Also of note was that parental coping styles rather than adolescent coping styles significantly correlated with adolescents' quality-of-life health scores. Severity of illness did not correlate with adolescent quality-of-life health scores. There was significant agreement between adolescent and parental quality-of-life health scores and stressful event ratings. Adolescents with recent-onset IBD rely more on family members than their peers for emotional support, and they depend more on their parents' coping skills than their own. These findings may indicate lags in normal adolescent development. Adolescents and parents do communicate and share concerns with each other. Support programs for adolescents with IBD should reinforce existing coping skills and parent-adolescent communication while promoting normative development.

MapReduce Based Parallel Bayesian Network for Manufacturing Quality Control

NASA Astrophysics Data System (ADS)

Zheng, Mao-Kuan; Ming, Xin-Guo; Zhang, Xian-Yu; Li, Guo-Ming

2017-09-01

Increasing complexity of industrial products and manufacturing processes have challenged conventional statistics based quality management approaches in the circumstances of dynamic production. A Bayesian network and big data analytics integrated approach for manufacturing process quality analysis and control is proposed. Based on Hadoop distributed architecture and MapReduce parallel computing model, big volume and variety quality related data generated during the manufacturing process could be dealt with. Artificial intelligent algorithms, including Bayesian network learning, classification and reasoning, are embedded into the Reduce process. Relying on the ability of the Bayesian network in dealing with dynamic and uncertain problem and the parallel computing power of MapReduce, Bayesian network of impact factors on quality are built based on prior probability distribution and modified with posterior probability distribution. A case study on hull segment manufacturing precision management for ship and offshore platform building shows that computing speed accelerates almost directly proportionally to the increase of computing nodes. It is also proved that the proposed model is feasible for locating and reasoning of root causes, forecasting of manufacturing outcome, and intelligent decision for precision problem solving. The integration of bigdata analytics and BN method offers a whole new perspective in manufacturing quality control.

Factors Affecting Quality of Laboratory Services in Public and Private Health Facilities in Addis Ababa, Ethiopia

PubMed Central

Taye, Binyam; Belay, Getachew; Ashenafi, Aytenew; Girma, Veronica

2017-01-01

Background Quality laboratory service is an essential component of health care system but in Sub-Saharan Africa such as Ethiopia, laboratories quality system remains weak due to several factors and it needs more attention to strengthen its capacity and quality system. Methodology A cross sectional study was conducted using a questionnaire to assess factors affecting the quality of laboratory service at private and public health institutions in Addis Ababa. Results A total of 213 laboratory professionals participated in the study and 131 (61.5%) participants had bachelor degree. Majority, 133 (62.4%), of the professionals did not attend any work related training. Seventy five (35.2%) respondents believed that their laboratories did not provide quality laboratory services and the major reported factors affecting provision of quality services were shortage of resources (64.3%), poor management support (57.3%), poor equipment quality (53.4%), high workload (41.1%), lack of equipment calibration (38.3%) and lack of knowledge (23.3%). Moreover logistic regression analysis showed that provision of quality laboratory service was significantly associated with result verification (AOR=9.21, 95% CI=2.26, 37.48), internal quality control (AOR= 6.11, 95% CI=2.11, 17.70), turnaround time (AOR=5.11, 95% CI=1.94, 13.46), shortage of equipment (AOR=7.76, 95% CI=2.55, 23.66), communication with clinicians (AOR=3.24, 95% CI=1.25, 8.41) and lack of job description (AOR=3.67, 95% CI=1.319, 10.22). Conclusion In conclusion, the major factors that affecting the quality of laboratory service were associated with poor human resource management, poor resources provision, poor management commitment, ineffective communication system and lack of well-established quality management system. PMID:29075171

High Resolution Peripheral Quantitative Computed Tomography for Assessment of Bone Quality

NASA Astrophysics Data System (ADS)

Kazakia, Galateia

2014-03-01

The study of bone quality is motivated by the high morbidity, mortality, and societal cost of skeletal fractures. Over 10 million people are diagnosed with osteoporosis in the US alone, suffering 1.5 million osteoporotic fractures and costing the health care system over 17 billion annually. Accurate assessment of fracture risk is necessary to ensure that pharmacological and other interventions are appropriately administered. Currently, areal bone mineral density (aBMD) based on 2D dual-energy X-ray absorptiometry (DXA) is used to determine osteoporotic status and predict fracture risk. Though aBMD is a significant predictor of fracture risk, it does not completely explain bone strength or fracture incidence. The major limitation of aBMD is the lack of 3D information, which is necessary to distinguish between cortical and trabecular bone and to quantify bone geometry and microarchitecture. High resolution peripheral quantitative computed tomography (HR-pQCT) enables in vivo assessment of volumetric BMD within specific bone compartments as well as quantification of geometric and microarchitectural measures of bone quality. HR-pQCT studies have documented that trabecular bone microstructure alterations are associated with fracture risk independent of aBMD.... Cortical bone microstructure - specifically porosity - is a major determinant of strength, stiffness, and fracture toughness of cortical tissue and may further explain the aBMD-independent effect of age on bone fragility and fracture risk. The application of finite element analysis (FEA) to HR-pQCT data permits estimation of patient-specific bone strength, shown to be associated with fracture incidence independent of aBMD. This talk will describe the HR-pQCT scanner, established metrics of bone quality derived from HR-pQCT data, and novel analyses of bone quality currently in development. Cross-sectional and longitudinal HR-pQCT studies investigating the impact of aging, disease, injury, gender, race, and

Confirmatory factor analysis of the Chinese version of the Pediatric Quality-of-Life Inventory Cancer Module.

PubMed

Li, Ho Cheung William; Williams, Phoebe D; Williams, Arthur R; Chung, Joyce O K; Chiu, Sau Ying; Lopez, Violeta

2013-01-01

Before the Chinese version of the Pediatric Quality-of-Life Inventory Cancer Module can be used to assess the multidimensional construct of quality of life among Hong Kong Chinese pediatric patients with cancer, its psychometric properties need to be further empirically tested. The objectives of the study were to establish the construct validity, including hypothesis testing and a confirmatory factor analysis of factor structure, of the Chinese version of the Pediatric Quality-of-Life Inventory Cancer Module. A cross-sectional study was used; 200 children hospitalized with cancer (9- to 16-year-olds) were recruited. Participants were asked to respond to the Chinese version of the Cancer Module, Therapy-Related Symptom Checklist, and Rosenberg's Self-esteem Scale. The results showed that there was a strong positive correlation between children's self-esteem and quality of life (r = 0.50) and a strong negative correlation between children's therapy-related symptoms and quality of life (r = -0.65). Confirmatory factor analysis indicated that there were 7 factors underlying the Chinese version of the Cancer Module. The study added further evidence of the construct validity of the Chinese version of the Cancer Module, patient version. The Cancer Module can be used to assess and evaluate psychological interventions directed toward promoting the quality of life of children hospitalized with cancer.

Factors Affecting Career Choice: Comparison Between Students from Computer and Other Disciplines

NASA Astrophysics Data System (ADS)

Alexander, P. M.; Holmner, M.; Lotriet, H. H.; Matthee, M. C.; Pieterse, H. V.; Naidoo, S.; Twinomurinzi, H.; Jordaan, D.

2011-06-01

The number of student enrolments in computer-related courses remains a serious concern worldwide with far reaching consequences. This paper reports on an extensive survey about career choice and associated motivational factors amongst new students, only some of whom intend to major in computer-related courses, at two South African universities. The data were analyzed using some components of Social Cognitive Career Theory, namely external influences, self-efficacy beliefs and outcome expectations. The research suggests the need for new strategies for marketing computer-related courses and the avenues through which they are marketed. This can to some extent be achieved by studying strategies used by other (non-computer) university courses, and their professional bodies. However, there are also distinct differences, related to self-efficacy and career outcomes, between the computer majors and the `other' group and these need to be explored further in order to find strategies that work well for this group. It is not entirely clear what the underlying reasons are for these differences but it is noteworthy that the perceived importance of "Interest in the career field" when choosing a career remains very high for both groups of students.

Identification and assessment of potential water quality impact factors for drinking-water reservoirs.

PubMed

Gu, Qing; Deng, Jinsong; Wang, Ke; Lin, Yi; Li, Jun; Gan, Muye; Ma, Ligang; Hong, Yang

2014-06-10

Various reservoirs have been serving as the most important drinking water sources in Zhejiang Province, China, due to the uneven distribution of precipitation and severe river pollution. Unfortunately, rapid urbanization and industrialization have been continuously challenging the water quality of the drinking-water reservoirs. The identification and assessment of potential impacts is indispensable in water resource management and protection. This study investigates the drinking water reservoirs in Zhejiang Province to better understand the potential impact on water quality. Altogether seventy-three typical drinking reservoirs in Zhejiang Province encompassing various water storage levels were selected and evaluated. Using fifty-two reservoirs as training samples, the classification and regression tree (CART) method and sixteen comprehensive variables, including six sub-sets (land use, population, socio-economy, geographical features, inherent characteristics, and climate), were adopted to establish a decision-making model for identifying and assessing their potential impacts on drinking-water quality. The water quality class of the remaining twenty-one reservoirs was then predicted and tested based on the decision-making model, resulting in a water quality class attribution accuracy of 81.0%. Based on the decision rules and quantitative importance of the independent variables, industrial emissions was identified as the most important factor influencing the water quality of reservoirs; land use and human habitation also had a substantial impact on water quality. The results of this study provide insights into the factors impacting the water quality of reservoirs as well as basic information for protecting reservoir water resources.

Factors affecting quality of life in Hungarian adults with epilepsy: A comparison of four psychiatric instruments.

PubMed

Kováts, Daniella; Császár, Noémi; Haller, József; Juhos, Vera; Sallay, Viola; Békés, Judit; Kelemen, Anna; Fabó, Dániel; Rásonyi, György; Folyovich, András; Kurimay, Tamás

2017-09-01

We investigated the impact of 19 factors on life quality in Hungarian patients with epilepsy. Wellbeing was evaluated by several inventories to investigate the impact of factors in more detail. A cross-sectional study was performed in 170 patients. Wellbeing was evaluated with the WHO-5 Well-being Index (WHOQOL-5), Diener Satisfaction with Life Scale (SwLS), and the Quality of Life in Epilepsy-31 Questionnaire (Qolie-31). We investigated their association with demographic characteristics, general health status, epilepsy, and its treatment. The impact of these factors on illness perception (Illness Perception Questionnaire, IPQ) was also studied. The four measures correlated highly significantly. In addition, the predictive power of factors was comparable with the four inventories as evaluated by Multiple Regression. Factors explained 52%, 41%, 63% and 46% in the variance of WHOQOL-5, SwLS, Qolie-31, and IPQ scores, respectively. However, associations with particular factors were instrument-specific. The WHOQOL-5 was associated with factors indicative of general health. SwLS scores were associated with health-related and several demographic factors. Neither showed associations with epilepsy-related factors. All four categories of factors were associated with Qolie-31 and IPQ scores. Factors had an additive impact on IPQ, but not on Qolie-31. Our findings reveal interactions between the method of life quality assessment and the factors that are identified as influencing life quality. This appears to be the first study that analyses the factors that influence illness perception in epilepsy patients, and suggests that the IPQ may become a valuable tool in epilepsy research. Copyright © 2017 Elsevier Inc. All rights reserved.

Hydrodynamics and Water Quality forecasting over a Cloud Computing environment: INDIGO-DataCloud

NASA Astrophysics Data System (ADS)

Aguilar Gómez, Fernando; de Lucas, Jesús Marco; García, Daniel; Monteoliva, Agustín

2017-04-01

Algae Bloom due to eutrophication is an extended problem for water reservoirs and lakes that impacts directly in water quality. It can create a dead zone that lacks enough oxygen to support life and it can also be human harmful, so it must be controlled in water masses for supplying, bathing or other uses. Hydrodynamic and Water Quality modelling can contribute to forecast the status of the water system in order to alert authorities before an algae bloom event occurs. It can be used to predict scenarios and find solutions to reduce the harmful impact of the blooms. High resolution models need to process a big amount of data using a robust enough computing infrastructure. INDIGO-DataCloud (https://www.indigo-datacloud.eu/) is an European Commission funded project that aims at developing a data and computing platform targeting scientific communities, deployable on multiple hardware and provisioned over hybrid (private or public) e-infrastructures. The project addresses the development of solutions for different Case Studies using different Cloud-based alternatives. In the first INDIGO software release, a set of components are ready to manage the deployment of services to perform N number of Delft3D simulations (for calibrating or scenario definition) over a Cloud Computing environment, using the Docker technology: TOSCA requirement description, Docker repository, Orchestrator, AAI (Authorization, Authentication) and OneData (Distributed Storage System). Moreover, the Future Gateway portal based on Liferay, provides an user-friendly interface where the user can configure the simulations. Due to the data approach of INDIGO, the developed solutions can contribute to manage the full data life cycle of a project, thanks to different tools to manage datasets or even metadata. Furthermore, the cloud environment contributes to provide a dynamic, scalable and easy-to-use framework for non-IT experts users. This framework is potentially capable to automatize the processing of

[Influence of stress factors and socio-demographic characteristics on the sleep quality of nursing students].

PubMed

Benavente, Sonia Betzabeth Ticona; Silva, Rodrigo Marques da; Higashi, Aline Baraldi; Guido, Laura de Azevedo; Costa, Ana Lucia Siqueira

2014-06-01

To analyze the influence of stress factors and socio-demographic characteristics on the sleep quality of nursing students. An analytical cross-sectional and quantitative study, conducted with 151 nursing students in São Paulo between March and April of 2012. A form for socio-demographic characteristics, the Instrument to Evaluate Stress in Nursing Students and the Pittsburgh Sleep Index were applied. High levels of stress was predominant for Time Management (27.8%) and Professional Training (30.5%) and low sleep quality (78.8%). The Professional Communication, Professional Training and Theoretical Activity are positively correlated to sleep quality. Work activity, academic year and time for daily studies contributed to a low quality of sleep. Few stress factors from the academic environment and some socio-demographic characteristics contributed to the reduction of sleep quality in students.

Computer Science Majors: Sex Role Orientation, Academic Achievement, and Social Cognitive Factors

ERIC Educational Resources Information Center

Brown, Chris; Garavalia, Linda S.; Fritts, Mary Lou Hines; Olson, Elizabeth A.

2006-01-01

This study examined the sex role orientations endorsed by 188 male and female students majoring in computer science, a male-dominated college degree program. The relations among sex role orientation and academic achievement and social cognitive factors influential in career decision-making self-efficacy were explored. Findings revealed that…

Taste phenotype associates with cardiovascular disease risk factors via diet quality in multivariate modeling.

PubMed

Sharafi, Mastaneh; Rawal, Shristi; Fernandez, Maria Luz; Huedo-Medina, Tania B; Duffy, Valerie B

2018-05-08

Sensations from foods and beverages drive dietary choices, which in turn, affect risk of diet-related diseases. Perception of these sensation varies with environmental and genetic influences. This observational study aimed to examine associations between chemosensory phenotype, diet and cardiovascular disease (CVD) risk. Reportedly healthy women (n = 110, average age 45 ± 9 years) participated in laboratory-based measures of chemosensory phenotype (taste and smell function, propylthiouracil (PROP) bitterness) and CVD risk factors (waist circumference, blood pressure, serum lipids). Diet variables included preference and intake of sweet/high-fat foods, dietary restraint, and diet quality based on reported preference (Healthy Eating Preference Index-HEPI) and intake (Healthy Eating Index-HEI). We found that females who reported high preference yet low consumption of sweet/high-fat foods had the highest dietary restraint and depressed quinine taste function. PROP nontasters were more likely to report lower diet quality; PROP supertasters more likely to consume but not like a healthy diet. Multivariate structural models were fitted to identify predictors of CVD risk factors. Reliable latent taste (quinine taste function, PROP tasting) and smell (odor intensity) variables were identified, with taste explaining more variance in the CVD risk factors. Lower bitter taste perception was associated with elevated risk. In multivariate models, the HEPI completely mediated the taste-adiposity and taste-HDL associations and partially mediated the taste-triglyceride or taste-systolic blood pressure associations. The taste-LDL pathway was significant and direct. The HEI could not replace HEPI in adequate models. However, using a latent diet quality variable with HEPI and HEI, increased the strength of association between diet quality and adiposity or CVD risk factors. In conclusion, bitter taste phenotype was associated with CVD risk factors via diet quality

Relationship between diverse patient body size- and image acquisition-related factors, and quantitative and qualitative image quality in coronary computed tomography angiography: a multicenter observational study.

PubMed

Utsunomiya, Daisuke; Tanaka, Ryoichi; Yoshioka, Kunihiro; Awai, Kazuo; Mochizuki, Teruhito; Matsunaga, Naofumi; Ichikawa, Tomoaki; Kanematsu, Masayuki; Kim, Tonsok; Yamashita, Yasuyuki

2016-08-01

We investigated the effects of patient- and image acquisition-related factors on the image quality in coronary CT angiography (CCTA). We enrolled 1197 patients (728 men; 65 ± 12 years). All underwent CCTA under the routine scan protocol in 23 participating hospitals. The subjective image quality (3-point Likert scale: excellent, good, and poor) and the attenuation of the left and right coronary artery (LCA, RCA) were recorded; the effects of patient and image acquisition-related factors on vascular attenuation were then compared. The mean LCA attenuation was 515.2 ± 65.8 (excellent), 401.4 ± 63.4 (good), and 319.5 ± 47.6 HU (poor). The corresponding RCA attenuation was 496.6 ± 67.6, 390.5 ± 58.5, and 308.5 ± 50.7 HU, respectively. Univariate analysis revealed significant associations between sufficient coronary attenuation (> 400 HU) and the age, gender, body surface area (BSA), number of detectors, contrast synchronization, scan mode, and the fractional contrast dose. Multivariate analysis revealed that the bolus tracking method, prospective electrocardiogram gating, and fractional contrast dose were significantly associated with sufficient coronary enhancement. BSA and fractional contrast dose are the most important patient- and image acquisition-related factors for sufficient coronary attenuation in CCTA.

Fabrication of Silica Ultra High Quality Factor Microresonators

PubMed Central

Maker, Ashley J.; Armani, Andrea M.

2012-01-01

Whispering gallery resonant cavities confine light in circular orbits at their periphery.1-2 The photon storage lifetime in the cavity, quantified by the quality factor (Q) of the cavity, can be in excess of 500ns for cavities with Q factors above 100 million. As a result of their low material losses, silica microcavities have demonstrated some of the longest photon lifetimes to date1-2. Since a portion of the circulating light extends outside the resonator, these devices can also be used to probe the surroundings. This interaction has enabled numerous experiments in biology, such as single molecule biodetection and antibody-antigen kinetics, as well as discoveries in other fields, such as development of ultra-low-threshold microlasers, characterization of thin films, and cavity quantum electrodynamics studies.3-7 The two primary silica resonant cavity geometries are the microsphere and the microtoroid. Both devices rely on a carbon dioxide laser reflow step to achieve their ultra-high-Q factors (Q>100 million).1-2,8-9 However, there are several notable differences between the two structures. Silica microspheres are free-standing, supported by a single optical fiber, whereas silica microtoroids can be fabricated on a silicon wafer in large arrays using a combination of lithography and etching steps. These differences influence which device is optimal for a given experiment. Here, we present detailed fabrication protocols for both types of resonant cavities. While the fabrication of microsphere resonant cavities is fairly straightforward, the fabrication of microtoroid resonant cavities requires additional specialized equipment and facilities (cleanroom). Therefore, this additional requirement may also influence which device is selected for a given experiment. Introduction An optical resonator efficiently confines light at specific wavelengths, known as the resonant wavelengths of the device. 1-2 The common figure of merit for these optical resonators is the quality

The Use of Major Risk Factors for Computer-Based Distinction of Diabetic Patients with Ischemic Stroke and Without Stroke

DTIC Science & Technology

2001-10-25

THE USE of MAJOR RISK FACTORS for COMPUTER-BASED DISTINCTION of DIABETIC PATIENTS with ISCHEMIC STROKE and WITHOUT STROKE Sibel Oge Merey1...highlighting the major risk factors of diabetic patients with non-embolic stroke and without stroke by performing dependency analysis and decision making...of Major Risk Factors for Computer-Based Distinction of Diabetic Patients with Ischemic Stroke and Without Stroke Contract Number Grant Number

Physics and material science of ultra-high quality factor superconducting resonator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vostrikov, Alexander

2015-08-01

The nitrogen doping into niobium superconducting radio frequency cavity walls aiming to improve the fundamental mode quality factor is the subject of the research in the given work. Quantitative nitrogen diffusion into niobium model calculating the concentration profile was developed. The model estimations were confirmed with secondary ion mass spectrometry technique measurements. The model made controlled nitrogen doping recipe optimization possible. As a result the robust reproducible recipe for SRF cavity walls treatment with nitrogen doping was developed. The cavities produced with optimized recipe met LCLS–II requirements on quality factor of 2.7 ∙ 10 10 at acceleration field of 16more » MV/m. The microscopic effects of nitrogen doping on superconducting niobium properties were studied with low energy muon spin rotation technique and magnetometer measurements. No significant effect of nitrogen on the following features was found: electron mean free path, magnetic field penetration depth, and upper and surface critical magnetic fields. It was detected that for nitrogen doped niobium samples magnetic flux starts to penetrate inside the superconductor at lower external magnetic field value compared to the low temperature baked niobium ones. This explains lower quench field of SRF cavities treated with nitrogen. Quality factor improvement of fundamental mode forced to analyze the high order mode (HOM) impact on the particle beam dynamics. Both resonant and cumulative effects caused by monopole and dipole HOMs respectively are found to be negligible within the requirements for LCLS–II.« less

Successful Implementation Factors for Using Computers in Iranian Schools during One Decade (1995-2005)

ERIC Educational Resources Information Center

Zamani, Bibi Eshrat

2010-01-01

The main purpose of this paper is to identify factors and conditions that are important for successful implementation of computers in Iranian schools during one decade from 1995 to 2005. The second focus of this paper is to examine how these factors relate to models of implementation in other countries such as developed countries. This paper is…

Factors influencing hand/eye synchronicity in the computer age.

PubMed

Grant, A H

1992-09-01

In using a computer, the relation of vision to hand/finger actuated keyboard usage in performing fine motor-coordinated functions is influenced by the physical location, size, and collective placement of the keys. Traditional nonprehensile flat/rectangular keyboard applications usually require a high and nearly constant level of visual attention. Biometrically shaped keyboards would allow for prehensile hand-posturing, thus affording better tactile familiarity with the keys, requiring less intense and less constant level of visual attention to the task, and providing a greater measure of freedom from having to visualize the key(s). Workpace and related physiological changes, aging, onset of monocularization (intermittent lapsing of binocularity for near vision) that accompanies presbyopia, tool colors, and background contrast are factors affecting constancy of visual attention to task performance. Capitas extension, excessive excyclotorsion, and repetitive strain injuries (such as carpal tunnel syndrome) are common and debilitating concomitants to computer usage. These problems can be remedied by improved keyboard design. The salutary role of mnemonics in minimizing visual dependency is discussed.

Factors Influencing Practical Training Quality in Iranian Agricultural Higher Education

ERIC Educational Resources Information Center

Mojarradi, Gholamreza; Karamidehkordi, Esmail

2016-01-01

This paper presents an analysis of the factors influencing the practical training quality of agricultural higher education programmes from the senior students' perspective. The study was conducted in two public universities located in the north-west of Iran using a cross-sectional survey and structured interviews with a randomised sample of 254…

Lifestyle and semen quality: role of modifiable risk factors.

PubMed

Jurewicz, Joanna; Radwan, Michał; Sobala, Wojciech; Ligocka, Danuta; Radwan, Paweł; Bochenek, Michał; Hanke, Wojciech

2014-02-01

The relationship between exposure to lifestyle factors and adverse effects on human reproductive health is debated in the scientific literature and these controversies have increased public and regulatory attention. The aim of the study was to examine the association between modifiable lifestyle factors and main semen parameters, sperm morphology, and sperm chromatin structure. The study population consisted of 344 men who were attending an infertility clinic for diagnostic purposes with normal semen concentration of 20-300 M/ml or with slight oligozoospermia (semen total concentration of 15-20 M/ml) [WHO 1999]. Participants were interviewed and provided semen samples. The interview included questions about demographics, socio-economic status, medical history, lifestyle factors (consumption of alcohol, tobacco, coffee intake, cell phone and sauna usage), and physical activity. The results of the study suggest that lifestyle factors may affect semen quality. A negative association was found between increased body mass index (BMI) and semen volume (p = 0.03). Leisure time activity was positively associated with sperm concentration (p = 0.04) and coffee drinking with the percentage of motile sperm cells, and the percentage of sperm head and neck abnormalities (p = 0.01, p = 0.05, and p = 0.03, respectively). Drinking red wine 1-3 times per week was negatively related to sperm neck abnormalities (p = 0.01). Additionally, using a cell phone more than 10 years decreased the percentage of motile sperm cells (p = 0.02). Men who wore boxer shorts had a lower percentage of sperm neck abnormalities (p = 0.002) and percentage of sperm with DNA damage (p = 0.02). These findings may have important implications for semen quality and lifestyle.

Change in Quality of Life after Rehabilitation: Prognostic Factors for Visually Impaired Adults

ERIC Educational Resources Information Center

Langelaan, Maaike; de Boer, Michiel R.; van Nispen, Ruth M. A.; Wouters, Bill; Moll, Annette C.; van Rens, Ger H. M. B.

2009-01-01

The overall aim of rehabilitation for visually impaired adults is to improve the quality of life and (societal) participation. The objectives of this study were to obtain the short-term and long-term outcome of a comprehensive rehabilitation programme on quality of life for visually impaired adults, and prognostic baseline factors responsible for…

REVIEW OF THE GOVERNING EQUATIONS, COMPUTATIONAL ALGORITHMS, AND OTHER COMPONENTS OF THE MODELS-3 COMMUNITY MULTISCALE AIR QUALITY (CMAQ) MODELING SYSTEM

EPA Science Inventory

This article describes the governing equations, computational algorithms, and other components entering into the Community Multiscale Air Quality (CMAQ) modeling system. This system has been designed to approach air quality as a whole by including state-of-the-science capabiliti...

Clinical and psychosocial factors predicting health-related quality of life in hemodialysis patients.

PubMed

Kang, Gun Woo; Lee, In Hee; Ahn, Ki Sung; Lee, Jonghun; Ji, Yunmi; Woo, Jungmin

2015-07-01

Many patients with end-stage renal disease have significant impairment in health-related quality of life (HRQoL). Most previous studies have focused on clinical factors; however, quality of life can also be affected by psychosocial factors. The aim of this study was to identify the possible predictors of HRQoL among clinical and psychosocial factors in hemodialysis (HD) patients. The study included 101 patients who were undergoing HD. Psychosocial factors were evaluated using the Hospital Anxiety and Depression Scale, Multidimensional Scale of Perceived Social Support, Montreal Cognitive Assessment, and Pittsburgh Sleep Quality Index. We also assessed laboratory and clinical factors, including albumin, Kt/V as a marker of dialysis adequacy, normalized protein catabolic rate, and duration of HD. The Euro Quality of Life Questionnaire 5-Dimensional Classification (EQ-5D) was used to evaluate HRQoL. The mean EQ-5D index score was 0.704 ± 0.199. The following variables showed a significant association with the EQ-5D index: age (P < 0.001), depression (P < 0.001), anxiety (P < 0.001), support from friends (P < 0.001), cognitive function (P < 0.001), duration of HD (P = 0.034), triglyceride (P = 0.031), total iron-binding capacity (P = 0.036), and phosphorus (P = 0.037). Multiple regression analysis showed that age (95% confidence interval [CI] -0.008 to -0.002), anxiety (95% CI -0.025 to -0.009), and support from friends (95% CI 0.004 to 0.018) were independent predictors of impaired HRQoL. This study explored determinants of impaired HRQoL in HD patients. We found that impaired HRQoL was independently associated with age, anxiety, and support from friends. We should consider psychosocial as well as clinical factors when evaluating ways to improve HRQoL in HD patients. © 2015 International Society for Hemodialysis.

SFCHECK: a unified set of procedures for evaluating the quality of macromolecular structure-factor data and their agreement with the atomic model.

PubMed

Vaguine, A A; Richelle, J; Wodak, S J

1999-01-01

In this paper we present SFCHECK, a stand-alone software package that features a unified set of procedures for evaluating the structure-factor data obtained from X-ray diffraction experiments and for assessing the agreement of the atomic coordinates with these data. The evaluation is performed completely automatically, and produces a concise PostScript pictorial output similar to that of PROCHECK [Laskowski, MacArthur, Moss & Thornton (1993). J. Appl. Cryst. 26, 283-291], greatly facilitating visual inspection of the results. The required inputs are the structure-factor amplitudes and the atomic coordinates. Having those, the program summarizes relevant information on the deposited structure factors and evaluates their quality using criteria such as data completeness, structure-factor uncertainty and the optical resolution computed from the Patterson origin peak. The dependence of various parameters on the nominal resolution (d spacing) is also given. To evaluate the global agreement of the atomic model with the experimental data, the program recomputes the R factor, the correlation coefficient between observed and calculated structure-factor amplitudes and Rfree (when appropriate). In addition, it gives several estimates of the average error in the atomic coordinates. The local agreement between the model and the electron-density map is evaluated on a per-residue basis, considering separately the macromolecule backbone and side-chain atoms, as well as solvent atoms and heterogroups. Among the criteria are the normalized average atomic displacement, the local density correlation coefficient and the polymer chain connectivity. The possibility of computing these criteria using the omit-map procedure is also provided. The described software should be a valuable tool in monitoring the refinement procedure and in assessing structures deposited in databases.

Natural and anthropogenic factors affecting the groundwater quality in Serbia.

PubMed

Devic, Gordana; Djordjevic, Dragana; Sakan, Sanja

2014-01-15

Various chemometric techniques were used to analyze the quality of groundwater data sets. Seventeen water quality parameters: the cations Na, K, Ca, Mg, the anions Cl, SO4, NO3, HCO3 and nine trace elements Pb, As, Mn, Ni, Cu, Cd, Fe, Zn and Cr were measured at 66 different key sampling sites in ten representative areas (low land-Northern Autonomous Province of Serbia, Vojvodina and central Serbia) for the summer period of 2009. HCA grouped the sample sites into four clusters based on the similarities of the characteristics of the groundwater quality. DA showed two parameters, HCO3 and Zn, affording more than 90% correct assignments in the spatial analysis of four/three different regions in Serbia. Factor analysis was applied on the log-transformed data sets and allowed the identification of a reduced number of factors with hydrochemical meaning. The results showed severe pollution with Mn, As, NO3, Ni, Pb whereby anthropogenic origin of these contaminants was indicated. The pollution comes from both scattered point sources (industrial and urban effluent) and diffuse source agricultural activity. These samples may not be suitable for human consumption; the water quality belongs to class III/IV (contaminated). The Fe anomalies (7.1mg/L) in the water from the Vetrnica site can be attributed to natural sources, such as the dissolution of rock masses and rock fragments. The serious groundwater contamination with As (25.7-137.8 μg/L) in the area of Banat (Northern Autonomous Province of Serbia, Vojvodina) and a sample No. 9 at the Great Morava River requires urgent attention. © 2013.

Phantom dosimetry and image quality of i-CAT FLX cone-beam computed tomography

PubMed Central

Ludlow, John B.; Walker, Cameron

2013-01-01

Introduction Increasing use of cone-beam computed tomography in orthodontics has been coupled with heightened concern with the long-term risks of x-ray exposure in orthodontic populations. An industry response to this has been to offer low-exposure alternative scanning options in newer cone-beam computed tomography models. Methods Effective doses resulting from various combinations of field size, and field location comparing child and adult anthropomorphic phantoms using the recently introduced i-CAT FLX cone-beam computed tomography unit were measured with Optical Stimulated Dosimetry using previously validated protocols. Scan protocols included High Resolution (360° rotation, 600 image frames, 120 kVp, 5 mA, 7.4 sec), Standard (360°, 300 frames, 120 kVp, 5 mA, 3.7 sec), QuickScan (180°, 160 frames, 120 kVp, 5 mA, 2 sec) and QuickScan+ (180°, 160 frames, 90 kVp, 3 mA, 2 sec). Contrast-to-noise ratio (CNR) was calculated as a quantitative measure of image quality for the various exposure options using the QUART DVT phantom. Results Child phantom doses were on average 36% greater than Adult phantom doses. QuickScan+ protocols resulted in significantly lower doses than Standard protocols for child (p=0.0167) and adult (p=0.0055) phantoms. 13×16 cm cephalometric fields of view ranged from 11–85 μSv in the adult phantom and 18–120 μSv in the child for QuickScan+ and Standard protocols respectively. CNR was reduced by approximately 2/3rds comparing QuickScan+ to Standard exposure parameters. Conclusions QuickScan+ effective doses are comparable to conventional panoramic examinations. Significant dose reductions are accompanied by significant reductions in image quality. However, this trade-off may be acceptable for certain diagnostic tasks such as interim assessment of treatment results. PMID:24286904

TU-FG-201-04: Computer Vision in Autonomous Quality Assurance of Linear Accelerators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yu, H; Jenkins, C; Yu, S

Purpose: Routine quality assurance (QA) of linear accelerators represents a critical and costly element of a radiation oncology center. Recently, a system was developed to autonomously perform routine quality assurance on linear accelerators. The purpose of this work is to extend this system and contribute computer vision techniques for obtaining quantitative measurements for a monthly multi-leaf collimator (MLC) QA test specified by TG-142, namely leaf position accuracy, and demonstrate extensibility for additional routines. Methods: Grayscale images of a picket fence delivery on a radioluminescent phosphor coated phantom are captured using a CMOS camera. Collected images are processed to correct formore » camera distortions, rotation and alignment, reduce noise, and enhance contrast. The location of each MLC leaf is determined through logistic fitting and a priori modeling based on knowledge of the delivered beams. Using the data collected and the criteria from TG-142, a decision is made on whether or not the leaf position accuracy of the MLC passes or fails. Results: The locations of all MLC leaf edges are found for three different picket fence images in a picket fence routine to 0.1mm/1pixel precision. The program to correct for image alignment and determination of leaf positions requires a runtime of 21– 25 seconds for a single picket, and 44 – 46 seconds for a group of three pickets on a standard workstation CPU, 2.2 GHz Intel Core i7. Conclusion: MLC leaf edges were successfully found using techniques in computer vision. With the addition of computer vision techniques to the previously described autonomous QA system, the system is able to quickly perform complete QA routines with minimal human contribution.« less

Authentic sheep meat in the European Union: Factors influencing and validating its unique meat quality.

PubMed

Erasmus, Sara W; Muller, Magdalena; Hoffman, Louwrens C

2017-05-01

Authentic meat products are gaining attention through their unique quality characteristics linked to their origin. Various factors are known to influence the quality of fresh meat. This review describes the different Protected Designation of Origin (PDO) and Protected Geographical Indication (PGI) lamb types and discusses the factors which influences its unique sensory and chemical characteristics. Flavour, aroma, texture and colour play an integral part in the sensory quality of denomination of origin fresh meat products. For authentic fresh sheep meat the sensory (as well as chemical) quality is largely influenced by diet followed by breed, age and gender. However, diet forms the link with the geographical area of origin, which together with the traditional production system and sheep breeds used, lends the product its authentic nature. This review shows how diet linked to origin can affect the quality of the meat and furthermore how other factors such as breed can also have an effect. Research relating to the authentic lamb types were evaluated and the shortcomings highlighted in order to assist with the development of PDO and PGI specifications in the future. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Evaluation of the Factors which Contribute to the Ocular Complaints in Computer Users

PubMed Central

Agarwal, Smita; Goel, Dishanter; Sharma, Anshu

2013-01-01

Context: Use of information technology hardware given new heights to professional success rate and saves time but on the other hand its harmful effect has introduced an array of health related complaints causing hazards for our human health. Increased use of computers has led to an increase in the number of patients with ocular complaints which are being grouped together as computer vision syndrome (CVS). In view of that, this study was undertaken to find out the ocular complaints and the factors contributing to occurrence of such problems in computer users. Aims: To evaluate the factors contributing to Ocular complaints in computer users in Teerthanker Mahaveer University, Moradabad, U.P. India. Settings and Design: Community-based cross-sectional study of 150 subjects who work on computer for varying period of time in Teerthanker Mahaveer University, Moradabad, Uttar Pradesh. Materials and Methods: Two hundred computer operators working in different institutes offices and bank of were selected randomly in Teerthanker Mahaveer University, Moradabad, and Uttar Pradesh. 16 were non responders 18 did not come for assessment and 16 were excluded due to complaints prior to computer use making no response rate Twenty-one did not participate in the study, making the no response rate 25%. Rest of the subjects (n = 150) were asked to fill a pre-tested questionnaire, after obtaining their verbal consent Depending on the average hours of usage in a day, they were categorized into three categories viz. <2 hrs, 2-6 hrs, >6 hrs of usage. All the responders were asked to come to the Ophthalmic OPD for further interview and assessment. Statistical Analysis Used: Simple proportions and Chi-square test. Results: Among the 150 subjects studied major ocular complaint reported in descending order were eyestrain. (53%). Occurrence of eye strain, ( 53.8%), itching ( 47.6%) and burning (66.7%) in subjects using computer for more than 6 hours. distance from computer screen with respect to

[Factors associated with poor sleep quality in the Brazilian population ≥ 40 years of age: VIGICARDIO Study].

PubMed

Muñoz-Pareja, Maritza; Loch, Mathias Roberto; Dos Santos, Hellen Geremias; Sakay Bortoletto, Maira Sayuri; Durán González, Alberto; Maffei de Andrade, Selma

The prevalence of poor sleep quality in men and women ≥ 40 years old from the VIGICARDIO Study was determined, and sociodemographic, health, lifestyle and social capital factors associated with poor sleep quality were identified. A population-based study conducted in 2011 among 1,058 non-institutionalised individuals randomly selected from Cambé, Paraná State, Brazil. Logistic regression was used to evaluate the association between sleep quality and sociodemographic, health, lifestyle and social capital factors in men and women. The prevalence of poor sleep quality was 34% in men and 44% in women. Having bad/regular self-rated health status was a factor associated with poor sleep quality in men (OR: 1.79; 95% CI: 1.17-2.72) and women (OR: 2.43; 95% CI: 1.68-3.53). Being obese (OR: 1.67; 95% CI: 1.13-2.46), having depression (OR: 2.09; 95% CI: 1.41-3.13) and presenting temporal orientation difficulties (OR: 1.95; 95% CI: 1.08-3.52) were associated factors in women. Difficulty to understand what is explained (OR: 2.18; 95% CI: 1.16-4.09) and alcohol abuse (OR: 1.85; 95% CI: 1.21-2.83) were associated factors in men. Factors affecting sleep quality are different for men and for women. These factors should be taken into consideration when devising activities that promote good sleep quality, with a view to improving their effectiveness. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Identification and Assessment of Potential Water Quality Impact Factors for Drinking-Water Reservoirs

PubMed Central

Gu, Qing; Deng, Jinsong; Wang, Ke; Lin, Yi; Li, Jun; Gan, Muye; Ma, Ligang; Hong, Yang

2014-01-01

Various reservoirs have been serving as the most important drinking water sources in Zhejiang Province, China, due to the uneven distribution of precipitation and severe river pollution. Unfortunately, rapid urbanization and industrialization have been continuously challenging the water quality of the drinking-water reservoirs. The identification and assessment of potential impacts is indispensable in water resource management and protection. This study investigates the drinking water reservoirs in Zhejiang Province to better understand the potential impact on water quality. Altogether seventy-three typical drinking reservoirs in Zhejiang Province encompassing various water storage levels were selected and evaluated. Using fifty-two reservoirs as training samples, the classification and regression tree (CART) method and sixteen comprehensive variables, including six sub-sets (land use, population, socio-economy, geographical features, inherent characteristics, and climate), were adopted to establish a decision-making model for identifying and assessing their potential impacts on drinking-water quality. The water quality class of the remaining twenty-one reservoirs was then predicted and tested based on the decision-making model, resulting in a water quality class attribution accuracy of 81.0%. Based on the decision rules and quantitative importance of the independent variables, industrial emissions was identified as the most important factor influencing the water quality of reservoirs; land use and human habitation also had a substantial impact on water quality. The results of this study provide insights into the factors impacting the water quality of reservoirs as well as basic information for protecting reservoir water resources. PMID:24919129

Academic mobility as a key factor of quality assurance in tertiary education

NASA Astrophysics Data System (ADS)

Voroshilova, Anna A.

2015-01-01

Academic mobility of both faculty and students forms a critical element of the international dimension of higher education and is one of the most important factors of quality assurance of higher education institutions worldwide. Internationalization and globalization of Russian higher education system is having one of the major impacts on the quality management and assurance. Faculty and student mobility figures are now one of the core factors for obtaining state accreditation for Russian universities as well as an important indicator showing the university success and prestige. The aim of the paper is a closer look at the perspectives and results of the academic mobility, the factors stimulating and discouraging mobility, and the outcomes of the mobility influencing the education in Russian universities. Siberian State Aerospace University has had more than 10 years experience in organizing student mobility. Most of the problems in carrying out international activities are common for the whole Russia but still there are some peculiarities featuring technical universities situated in the centre of Russia.

Women in computer science: An interpretative phenomenological analysis exploring common factors contributing to women's selection and persistence in computer science as an academic major

NASA Astrophysics Data System (ADS)

Thackeray, Lynn Roy

The purpose of this study is to understand the meaning that women make of the social and cultural factors that influence their reasons for entering and remaining in study of computer science. The twenty-first century presents many new challenges in career development and workforce choices for both men and women. Information technology has become the driving force behind many areas of the economy. As this trend continues, it has become essential that U.S. citizens need to pursue a career in technologies, including the computing sciences. Although computer science is a very lucrative profession, many Americans, especially women, are not choosing it as a profession. Recent studies have shown no significant differences in math, technical and science competency between men and women. Therefore, other factors, such as social, cultural, and environmental influences seem to affect women's decisions in choosing an area of study and career choices. A phenomenological method of qualitative research was used in this study, based on interviews of seven female students who are currently enrolled in a post-secondary computer science program. Their narratives provided meaning into the social and cultural environments that contribute to their persistence in their technical studies, as well as identifying barriers and challenges that are faced by female students who choose to study computer science. It is hoped that the data collected from this study may provide recommendations for the recruiting, retention and support for women in computer science departments of U.S. colleges and universities, and thereby increase the numbers of women computer scientists in industry. Keywords: gender access, self-efficacy, culture, stereotypes, computer education, diversity.

Metrics and the effective computational scientist: process, quality and communication.

PubMed

Baldwin, Eric T

2012-09-01

Recent treatments of computational knowledge worker productivity have focused upon the value the discipline brings to drug discovery using positive anecdotes. While this big picture approach provides important validation of the contributions of these knowledge workers, the impact accounts do not provide the granular detail that can help individuals and teams perform better. I suggest balancing the impact-focus with quantitative measures that can inform the development of scientists. Measuring the quality of work, analyzing and improving processes, and the critical evaluation of communication can provide immediate performance feedback. The introduction of quantitative measures can complement the longer term reporting of impacts on drug discovery. These metric data can document effectiveness trends and can provide a stronger foundation for the impact dialogue. Copyright © 2012 Elsevier Ltd. All rights reserved.

Efficient algorithms for computing a strong rank-revealing QR factorization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gu, M.; Eisenstat, S.C.

1996-07-01

Given an m x n matrix M with m {ge} n, it is shown that there exists a permutation {Pi} and an integer k such that the QR factorization given by equation (1) reveals the numerical rank of M: the k x k upper-triangular matrix A{sub k} is well conditioned, norm of (C{sub k}){sub 2} is small, and B{sub k} is linearly dependent on A{sub k} with coefficients bounded by a low-degree polynomial in n. Existing rank-revealing QR (RRQR) algorithms are related to such factorizations and two algorithms are presented for computing them. The new algorithms are nearly as efficientmore » as QR with column pivoting for most problems and take O(mn{sup 2}) floating-point operations in the worst case.« less

[Post-partum depressive symptoms: Prevalence, risk factors and relationship with quality of life].

PubMed

Cherif, R; Feki, I; Gassara, H; Baati, I; Sellami, R; Feki, H; Chaabene, K; Masmoudi, J

2017-10-01

The objective of our study was to estimate the prevalence of the post-partum depressive symptomatology in a sample of Tunisian women, to study associated factors and to assess its relationship to quality of life. This is a prospective study carried out in two stages: during the first week (T1), then between sixth and eighth week post-partum (T2). Depressive symptomatology and quality of life were assessed respectively by the Edinburgh Postnatal Depression Scale and the World Health Organization Quality of Life scale. In the first stage, the prevalence of depressive symptomatology in the total sample (150 women) was 14.7% and was related to age above 35 years, low school level, personal psychiatric history, multiparity, caesarean delivery or forceps in the previous pregnancy and unplanned pregnancy. This prevalence was 19.8% among the 126 women reviewed in T2 and was correlated with the exaggerated sympathetic signs during pregnancy, namely perversion of taste and fatigue. Quality of life was strongly correlated with depressive symptoms in T1 and T2. Post-partum depressive symptoms were common in our sample and were correlated with quality of life. Therapeutic measures should be proposed for women with post-partum depressive symptoms and particularly with several risk factors in order to improve their quality of life. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

30 CFR 206.175 - How do I determine quantities and qualities of production for computing royalties?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How do I determine quantities and qualities of production for computing royalties? 206.175 Section 206.175 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR MINERALS REVENUE MANAGEMENT PRODUCT VALUATION Indian Gas § 206.175 How do I...

Systematic monitoring of male circumcision scale-up in Nyanza, Kenya: exploratory factor analysis of service quality instrument and performance ranking.

PubMed

Omondi Aduda, Dickens S; Ouma, Collins; Onyango, Rosebella; Onyango, Mathews; Bertrand, Jane

2014-01-01

Considerable conceptual and operational complexities related to service quality measurements and variability in delivery contexts of scaled-up medical male circumcision, pose real challenges to monitoring implementation of quality and safety. Clarifying latent factors of the quality instruments can enhance contextual applicability and the likelihood that observed service outcomes are appropriately assessed. To explore factors underlying SYMMACS service quality assessment tool (adopted from the WHO VMMC quality toolkit) and; determine service quality performance using composite quality index derived from the latent factors. Using a comparative process evaluation of Voluntary Medical Male Circumcision Scale-Up in Kenya site level data was collected among health facilities providing VMMC over two years. Systematic Monitoring of the Medical Male Circumcision Scale-Up quality instrument was used to assess availability of guidelines, supplies and equipment, infection control, and continuity of care services. Exploratory factor analysis was performed to clarify quality structure. Fifty four items and 246 responses were analyzed. Based on Eigenvalue >1.00 cut-off, factors 1, 2 & 3 were retained each respectively having eigenvalues of 5.78; 4.29; 2.99. These cumulatively accounted for 29.1% of the total variance (12.9%; 9.5%; 6.7%) with final communality estimates being 13.06. Using a cut-off factor loading value of ≥0.4, fifteen items loading on factor 1, five on factor 2 and one on factor 3 were retained. Factor 1 closely relates to preparedness to deliver safe male circumcisions while factor two depicts skilled task performance and compliance with protocols. Of the 28 facilities, 32% attained between 90th and 95th percentile (excellent); 45% between 50th and 75th percentiles (average) and 14.3% below 25th percentile (poor). the service quality assessment instrument may be simplified to have nearly 20 items that relate more closely to service outcomes. Ranking of

Musculoskeletal symptoms and associated risk factors among office workers with high workload computer use.

PubMed

Cho, Chiung-Yu; Hwang, Yea-Shwu; Cherng, Rong-Ju

2012-09-01

Although the prevalence of reported discomfort by computer workers is high, the impact of high computer workload on musculoskeletal symptoms remains unclear. The purpose of this study was to investigate the prevalence of musculoskeletal symptoms for office workers with high computer workload. The association between risk factors and musculoskeletal symptoms was also assessed. Two questionnaires were posted on the Web sites of 3 companies and 1 university to recruit computer users in Tainan, Taiwan, during May to July 2009. The 12-item Chinese Health Questionnaire and Musculoskeletal Symptom Questionnaire were chosen as the evaluation tools for musculoskeletal symptoms and its associated risk factors. Chinese Health Questionnaire greater than 5 and computer usage greater than 7 h/d were used to as the cutoff line to divide groups. Descriptive statistics were computed for mean values and frequencies. χ(2) Analysis was used to determine significant differences between groups. A 0.05 level of significance of was used for statistical comparisons. A total of 254 subjects returned the questionnaire, of which 203 met the inclusion criteria. The 3 leading regions of musculoskeletal symptoms among the computer users were the shoulder (73%), neck (71%), and upper back (60%) areas. Similarly, the 3 leading regions of musculoskeletal symptoms among the computer users with high workload were shoulder (77.3%), neck (75.6%), and upper back (63.9%) regions. High psychologic distress was significantly associated with shoulder and upper back complaints (odds ratio [OR], 3.46; OR, 2.24), whereas a high workload was significantly associated with lower back complaints (OR, 1.89). Females were more likely to report shoulder complaints (OR, 2.25). This study found that high psychologic distress was significantly associated with shoulder and upper back pain, whereas high workload was associated with lower back pain. Women tended to have a greater risk of shoulder complaints than men

Automated estimation of image quality for coronary computed tomographic angiography using machine learning.

PubMed

Nakanishi, Rine; Sankaran, Sethuraman; Grady, Leo; Malpeso, Jenifer; Yousfi, Razik; Osawa, Kazuhiro; Ceponiene, Indre; Nazarat, Negin; Rahmani, Sina; Kissel, Kendall; Jayawardena, Eranthi; Dailing, Christopher; Zarins, Christopher; Koo, Bon-Kwon; Min, James K; Taylor, Charles A; Budoff, Matthew J

2018-03-23

Our goal was to evaluate the efficacy of a fully automated method for assessing the image quality (IQ) of coronary computed tomography angiography (CCTA). The machine learning method was trained using 75 CCTA studies by mapping features (noise, contrast, misregistration scores, and un-interpretability index) to an IQ score based on manual ground truth data. The automated method was validated on a set of 50 CCTA studies and subsequently tested on a new set of 172 CCTA studies against visual IQ scores on a 5-point Likert scale. The area under the curve in the validation set was 0.96. In the 172 CCTA studies, our method yielded a Cohen's kappa statistic for the agreement between automated and visual IQ assessment of 0.67 (p < 0.01). In the group where good to excellent (n = 163), fair (n = 6), and poor visual IQ scores (n = 3) were graded, 155, 5, and 2 of the patients received an automated IQ score > 50 %, respectively. Fully automated assessment of the IQ of CCTA data sets by machine learning was reproducible and provided similar results compared with visual analysis within the limits of inter-operator variability. • The proposed method enables automated and reproducible image quality assessment. • Machine learning and visual assessments yielded comparable estimates of image quality. • Automated assessment potentially allows for more standardised image quality. • Image quality assessment enables standardization of clinical trial results across different datasets.

Effects of early life factors on the health and quality of life of older adults.

PubMed

Yilmaz, Fikriye; N Tekin, Rukiye

2018-01-01

Few studies on the effects of early life factors on the health and quality of life of adults have been conducted in Turkey. We aimed to investigate the effects of early life factors on the health and quality of life of older adults. We administered a questionnaire to 350 adults, aged 50-89 years, living in Cankaya, Ankara. The questionnaire covered sociodemographic characteristics, early life characteristics, health status, and the World Health Organization Quality of Life-Ageing scale. Data were analyzed using χ 2 tests, independent samples t-tests, one-way anova, and binary logistic regression analysis. The analyses showed that the most important risk factors for chronic disease were being ≥65 years (odds ratio (OR) = 2.34), having a chronic health problem before 18 years of age (OR = 2.48), experiencing prolonged hospitalization or bed rest before 18 years of age (OR = 2.65), and experiencing parental unconcern during early life (OR = 2.13) (P < 0.05). In addition, having a high school education or less includes people who have primary or secondary or high school diploma (OR = 1.65), having lived in a village (OR = 1.65), having a low family economic status (OR = 2.40), and having experienced one negative event (OR = 1.41) or two or more negative events (OR = 1.39) during their early lives were identified as important risk factors for low quality of life (P < 0.05). Early life factors are among the important determinants of the health and quality of life of older adults in Turkey. © 2017 Japanese Psychogeriatric Society.

Source-Based Modeling Of Urban Stormwater Quality Response to the Selected Scenarios Combining Future Changes in Climate and Socio-Economic Factors.

PubMed

Borris, Matthias; Leonhardt, Günther; Marsalek, Jiri; Österlund, Heléne; Viklander, Maria

2016-08-01

The assessment of future trends in urban stormwater quality should be most helpful for ensuring the effectiveness of the existing stormwater quality infrastructure in the future and mitigating the associated impacts on receiving waters. Combined effects of expected changes in climate and socio-economic factors on stormwater quality were examined in two urban test catchments by applying a source-based computer model (WinSLAMM) for TSS and three heavy metals (copper, lead, and zinc) for various future scenarios. Generally, both catchments showed similar responses to the future scenarios and pollutant loads were generally more sensitive to changes in socio-economic factors (i.e., increasing traffic intensities, growth and intensification of the individual land-uses) than in the climate. Specifically, for the selected Intermediate socio-economic scenario and two climate change scenarios (RSP = 2.6 and 8.5), the TSS loads from both catchments increased by about 10 % on average, but when applying the Intermediate climate change scenario (RCP = 4.5) for two SSPs, the Sustainability and Security scenarios (SSP1 and SSP3), the TSS loads increased on average by 70 %. Furthermore, it was observed that well-designed and maintained stormwater treatment facilities targeting local pollution hotspots exhibited the potential to significantly improve stormwater quality, however, at potentially high costs. In fact, it was possible to reduce pollutant loads from both catchments under the future Sustainability scenario (on average, e.g., TSS were reduced by 20 %), compared to the current conditions. The methodology developed in this study was found useful for planning climate change adaptation strategies in the context of local conditions.

Mind and Material: The Interplay between Computer-Related and Second Language Factors in Online Communication Dialogues

ERIC Educational Resources Information Center

Wu, Pin-hsiang Natalie; Kawamura, Michelle

2014-01-01

With a growing demand for learning English and a trend of utilizing computers in education, methods that can achieve the effectiveness of computer-mediated communication (CMC) to support language learning in higher education have been examined. However, second language factors manipulate both the process and production of CMC and, therefore,…

Improved RF Measurements of SRF Cavity Quality Factors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holzbauer, J. P.; Contreras, C.; Pischalnikov, Y.

SRF cavity quality factors can be accurately measured using RF-power based techniques only when the cavity is very close to critically coupled. This limitation is from systematic errors driven by non-ideal RF components. When the cavity is not close to critically coupled, these systematic effects limit the accuracy of the measurements. The combination of the complex base-band envelopes of the cavity RF signals in combination with a trombone in the circuit allow the relative calibration of the RF signals to be extracted from the data and systematic effects to be characterized and suppressed. The improved calibration allows accurate measurements tomore » be made over a much wider range of couplings. Demonstration of these techniques during testing of a single-spoke resonator with a coupling factor of near 7 will be presented, along with recommendations for application of these techniques.« less

High quality-factor fano metasurface comprising a single resonator unit cell

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sinclair, Michael B.; Warne, Larry K.; Basilio, Lorena I.

A new monolithic resonator metasurface design achieves ultra-high Q-factors while using only one resonator per unit cell. The metasurface relies on breaking the symmetry of otherwise highly symmetric resonators to induce intra-resonator mixing of bright and dark modes (rather than inter-resonator couplings), and is scalable from the near-infrared to radio frequencies and can be easily implemented in dielectric materials. The resulting high-quality-factor Fano metasurface can be used in many sensing, spectral filtering, and modulation applications.

Correlation of the clinical and physical image quality in chest radiography for average adults with a computed radiography imaging system.

PubMed

Moore, C S; Wood, T J; Beavis, A W; Saunderson, J R

2013-07-01

The purpose of this study was to examine the correlation between the quality of visually graded patient (clinical) chest images and a quantitative assessment of chest phantom (physical) images acquired with a computed radiography (CR) imaging system. The results of a previously published study, in which four experienced image evaluators graded computer-simulated postero-anterior chest images using a visual grading analysis scoring (VGAS) scheme, were used for the clinical image quality measurement. Contrast-to-noise ratio (CNR) and effective dose efficiency (eDE) were used as physical image quality metrics measured in a uniform chest phantom. Although optimal values of these physical metrics for chest radiography were not derived in this work, their correlation with VGAS in images acquired without an antiscatter grid across the diagnostic range of X-ray tube voltages was determined using Pearson's correlation coefficient. Clinical and physical image quality metrics increased with decreasing tube voltage. Statistically significant correlations between VGAS and CNR (R=0.87, p<0.033) and eDE (R=0.77, p<0.008) were observed. Medical physics experts may use the physical image quality metrics described here in quality assurance programmes and optimisation studies with a degree of confidence that they reflect the clinical image quality in chest CR images acquired without an antiscatter grid. A statistically significant correlation has been found between the clinical and physical image quality in CR chest imaging. The results support the value of using CNR and eDE in the evaluation of quality in clinical thorax radiography.

Correlation of the clinical and physical image quality in chest radiography for average adults with a computed radiography imaging system

PubMed Central

Wood, T J; Beavis, A W; Saunderson, J R

2013-01-01

Objective: The purpose of this study was to examine the correlation between the quality of visually graded patient (clinical) chest images and a quantitative assessment of chest phantom (physical) images acquired with a computed radiography (CR) imaging system. Methods: The results of a previously published study, in which four experienced image evaluators graded computer-simulated postero-anterior chest images using a visual grading analysis scoring (VGAS) scheme, were used for the clinical image quality measurement. Contrast-to-noise ratio (CNR) and effective dose efficiency (eDE) were used as physical image quality metrics measured in a uniform chest phantom. Although optimal values of these physical metrics for chest radiography were not derived in this work, their correlation with VGAS in images acquired without an antiscatter grid across the diagnostic range of X-ray tube voltages was determined using Pearson’s correlation coefficient. Results: Clinical and physical image quality metrics increased with decreasing tube voltage. Statistically significant correlations between VGAS and CNR (R=0.87, p<0.033) and eDE (R=0.77, p<0.008) were observed. Conclusion: Medical physics experts may use the physical image quality metrics described here in quality assurance programmes and optimisation studies with a degree of confidence that they reflect the clinical image quality in chest CR images acquired without an antiscatter grid. Advances in knowledge: A statistically significant correlation has been found between the clinical and physical image quality in CR chest imaging. The results support the value of using CNR and eDE in the evaluation of quality in clinical thorax radiography. PMID:23568362

Dietary intake and risk factors for poor diet quality among children in Nova Scotia.

PubMed

Veugelers, Paul J; Fitzgerald, Angela L; Johnston, Elizabeth

2005-01-01

Public health policies promote healthy nutrition but evaluations of children's adherence to dietary recommendations and studies of risk factors of poor nutrition are scarce, despite the importance of diet for the temporal increase in the prevalence of childhood obesity. Here we examine dietary intake and risk factors for poor diet quality among children in Nova Scotia to provide direction for health policies and prevention initiatives. In 2003, we surveyed 5,200 grade five students from 282 public schools in Nova Scotia, as well as their parents. We assessed students' dietary intake (Harvard's Youth Adolescent Food Frequency Questionnaire) and compared this with Canadian food group and nutrient recommendations. We summarized diet quality using the Diet Quality Index International, and used multilevel regression methods to evaluate potential child, parental and school risk factors for poor diet quality. In Nova Scotia, 42.3% of children did not meet recommendations for milk products nor did they meet recommendations for the food groups 'Vegetables and fruit' (49.9%), 'Grain products' (54.4%) and 'Meat and alternatives' (73.7%). Children adequately met nutrient requirements with the exception of calcium and fibre, of which intakes were low, and dietary fat and sodium, of which intakes were high. Skipping meals and purchasing meals at school or fast-food restaurants were statistically significant determinants of poor diet. Parents' assessment of their own eating habits was positively associated with the quality of their children's diets. Dietary intake among children in Nova Scotia is relatively poor. Explicit public health policies and prevention initiatives targeting children, their parents and schools may improve diet quality and prevent obesity.

Storage and computationally efficient permutations of factorized covariance and square-root information arrays

NASA Technical Reports Server (NTRS)

Muellerschoen, R. J.

1988-01-01

A unified method to permute vector stored Upper triangular Diagonal factorized covariance and vector stored upper triangular Square Root Information arrays is presented. The method involves cyclic permutation of the rows and columns of the arrays and retriangularization with fast (slow) Givens rotations (reflections). Minimal computation is performed, and a one dimensional scratch array is required. To make the method efficient for large arrays on a virtual memory machine, computations are arranged so as to avoid expensive paging faults. This method is potentially important for processing large volumes of radio metric data in the Deep Space Network.

Electronic Quality of Life Assessment Using Computer-Adaptive Testing

PubMed Central

2016-01-01

Background Quality of life (QoL) questionnaires are desirable for clinical practice but can be time-consuming to administer and interpret, making their widespread adoption difficult. Objective Our aim was to assess the performance of the World Health Organization Quality of Life (WHOQOL)-100 questionnaire as four item banks to facilitate adaptive testing using simulated computer adaptive tests (CATs) for physical, psychological, social, and environmental QoL. Methods We used data from the UK WHOQOL-100 questionnaire (N=320) to calibrate item banks using item response theory, which included psychometric assessments of differential item functioning, local dependency, unidimensionality, and reliability. We simulated CATs to assess the number of items administered before prespecified levels of reliability was met. Results The item banks (40 items) all displayed good model fit (P>.01) and were unidimensional (fewer than 5% of t tests significant), reliable (Person Separation Index>.70), and free from differential item functioning (no significant analysis of variance interaction) or local dependency (residual correlations < +.20). When matched for reliability, the item banks were between 45% and 75% shorter than paper-based WHOQOL measures. Across the four domains, a high standard of reliability (alpha>.90) could be gained with a median of 9 items. Conclusions Using CAT, simulated assessments were as reliable as paper-based forms of the WHOQOL with a fraction of the number of items. These properties suggest that these item banks are suitable for computerized adaptive assessment. These item banks have the potential for international development using existing alternative language versions of the WHOQOL items. PMID:27694100

Analysis of factors affecting the quality of life of those suffering from Crohn's disease.

PubMed

Chrobak-Bień, Joanna; Gawor, Anna; Paplaczyk, Małgorzata; Małecka-Panas, Ewa; Gąsiorowska, Anita

2017-08-31

Crohn's disease is an inflammatory bowel disease of unknown etiology. Its chronic nature, as well as symptoms of intestinal and overall significantly impedes the daily functioning of patients. Alternately occurring periods of exacerbation and remission are the cause of reduced quality of life of patients. Understanding the factors that caused the decrease in the quality of life, it allows us to understand the behavior and the situation of the patient and the ability to cope with stress caused by the disease. The aim of the study was to analyze the factors affecting the quality of life of people with Crohn's disease. The study group consisted of 50 people diagnosed with Crohn's disease. Respondents were treated at the Department of General Surgery and Colorectal Medical University of Lodz and Gastroenterological Clinic at the University Clinical Hospital No. 1 in Lodz. Quality of Life Survey was carried out by a diagnostic survey using a research tool SF-36v2 and surveys of its own design. Analysis of the results demonstrated that the quality of life of patients with Crohn's disease was reduced, especially during exacerbations. Evaluation of the quality of life of respondents in physical terms was slightly higher than in the mental aspect. Higher education subjects and the lack of need for surgical treatment significantly improves the quality of life. The occurrence of chronic disease reduces the quality of life of respondents. Elderly patients are better able to adapt to the difficult situation caused by the disease. The quality of life of women and men is at a similar level and patients in remission of the disease have a better quality of life of patients during exacerbations.

Water quality in turkey farms in Khemisset (Morocco) and potential risk factors.

PubMed

El Allaoui, A; Rhazi Filali, F; Derouich, A

2016-12-01

The objectives of this study were to assess the microbiological and physical/chemical quality of water in broiler turkey farms in the province of Khemisset (north-western Morocco) and, based on a questionnaire, to ascertain potential risk factors for contamination of drinking water with faecal coliforms. A total of 80 samples were collected and analysed in 20 farms (four from each farm). At the main inlet to the water line at the entrance to each turkey house, 100% of the samples were of unacceptable quality in terms of faecal coliforms, Escherichia coli, faecal streptococci, sulphitereducing anaerobes and enterococci. A significant reduction in microbiological contamination of the water line (p < 0.05) was observed on Day 60. While more than 90% of the samples were of satisfactory quality in terms of pH, nitrites, conductivity, nitrates and iron, only 35% were satisfactory in terms of total hardness and only 20% met quality standards for ammonium content. The factors affecting levels of contamination with faecal coliforms were water chlorination (p = 0.065; odds ratio = 14; 90% confidence interval [CI] = 1.14-71), cleaning and disinfection (p = 0.028; odds ratio = 14; 95% CI = 1.25-156.6) and antibiotic treatment (p = 0.001; odds ratio = 6; 95% CI = 2.1-35.2). To improve water quality in poultry farms, farmers are advised to protect wells from contamination and to install water purification units (pre-oxidation, coagulation, flocculation, disinfection). In addition, turkey houses and rearing equipment should be rigorously cleaned and disinfected between each batch of birds. © OIE (World Organisation for Animal Health), 2016.

Analysis Supporting Factors and Constraints LPMP Performance in Improving the Quality of Education in Jambi Province

ERIC Educational Resources Information Center

Rosadi, Kemas Imron

2015-01-01

Development of education in Indonesia is based on three aspects, namely equity and expansion, quality and relevance, as well as good governance. Quality education is influenced by several factors related to quality education managerial leaders, limited funds, facilities, educational facilities, media, learning resources, tools and training…

A Study of Quality of Service Communication for High-Speed Packet-Switching Computer Sub-Networks

NASA Technical Reports Server (NTRS)

Cui, Zhenqian

1999-01-01

In this thesis, we analyze various factors that affect quality of service (QoS) communication in high-speed, packet-switching sub-networks. We hypothesize that sub-network-wide bandwidth reservation and guaranteed CPU processing power at endpoint systems for handling data traffic are indispensable to achieving hard end-to-end quality of service. Different bandwidth reservation strategies, traffic characterization schemes, and scheduling algorithms affect the network resources and CPU usage as well as the extent that QoS can be achieved. In order to analyze those factors, we design and implement a communication layer. Our experimental analysis supports our research hypothesis. The Resource ReSerVation Protocol (RSVP) is designed to realize resource reservation. Our analysis of RSVP shows that using RSVP solely is insufficient to provide hard end-to-end quality of service in a high-speed sub-network. Analysis of the IEEE 802.lp protocol also supports the research hypothesis.

Boar management and semen handling factors affect the quality of boar extended semen.

PubMed

Lopez Rodriguez, Alfonso; Van Soom, Ann; Arsenakis, Ioannis; Maes, Dominiek

2017-01-01

Artificial insemination (AI) is the preferred method for reproduction in the majority of the intensive pig production systems Worldwide. To this end, fresh extended ready-to-use semen doses are either purchased from AI-centres or produced by boars kept on-farm. For profitable semen production, it is necessary to obtain a maximum amount of high quality semen from each boar. This paper reviews current knowledge on factors that may affect semen quality by influencing the boar or the semen during processing. Genetic markers could be used for early detection of boars with the highest fertility potential. Genetic selection for fast growth might jeopardize semen quality. Early detection of boars no longer fit for semen production might be possible by ultrasonography of the testes. Seasonal variation in sperm quality could be associated with changes in photoperiod and heat stress during summer. Comfortable housing, with appropiate bedding material to avoid locomotion problems is essential. In some areas, cooling systems may be necessary to avoid heat stress. The sperm quality can be manipulated by feeding strategies aiming, for instance, to increase sperm resistance to oxidative stress and extend storage duration. High collection frequency will negatively influence sperm quality. Also, if collection is not hygienically performed it will result in bacterial contamination of the semen doses. The concern over bacterial contamination has risen not only because of its negative effect on semen quality but also due to the detection of antimicrobial resistance in isolates from extended semen. Moreover, bacterial and viral pathogens must be monitored because they affect semen production and quality and constitute a risk of herd infection. During processing, boar sperm are submitted to many stress factors that can cause oxidative stress and capacitation-like changes potentially reducing their fertility potential. Dilution rate or dilution temperature affects the quality of the semen

Accurate optimization of amino acid form factors for computing small-angle X-ray scattering intensity of atomistic protein structures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tong, Dudu; Yang, Sichun; Lu, Lanyuan

2016-06-20

Structure modellingviasmall-angle X-ray scattering (SAXS) data generally requires intensive computations of scattering intensity from any given biomolecular structure, where the accurate evaluation of SAXS profiles using coarse-grained (CG) methods is vital to improve computational efficiency. To date, most CG SAXS computing methods have been based on a single-bead-per-residue approximation but have neglected structural correlations between amino acids. To improve the accuracy of scattering calculations, accurate CG form factors of amino acids are now derived using a rigorous optimization strategy, termed electron-density matching (EDM), to best fit electron-density distributions of protein structures. This EDM method is compared with and tested againstmore » other CG SAXS computing methods, and the resulting CG SAXS profiles from EDM agree better with all-atom theoretical SAXS data. By including the protein hydration shell represented by explicit CG water molecules and the correction of protein excluded volume, the developed CG form factors also reproduce the selected experimental SAXS profiles with very small deviations. Taken together, these EDM-derived CG form factors present an accurate and efficient computational approach for SAXS computing, especially when higher molecular details (represented by theqrange of the SAXS data) become necessary for effective structure modelling.« less

The quality of our Nation's waters: factors affecting public-supply-well vulnerability to contamination: understanding observed water quality and anticipating future water quality

USGS Publications Warehouse

Eberts, Sandra M.; Thomas, Mary Ann; Jagucki, Martha L.

2013-01-01

As part of the U.S. Geological Survey National Water-Quality Assessment (NAWQA) Program, a study was conducted from 2001 to 2011 to shed light on factors that affect the vulnerability of water from public-supply wells to contamination (referred to hereafter as “public-supply-well vulnerability”). The study was designed as a follow-up to earlier NAWQA studies that found mixtures of contaminants at low concentrations in groundwater near the water table in urban areas across the Nation and, less frequently, in deeper groundwater typically used for public supply. Beside the factors affecting public-supply-well vulnerability to contamination, this circular describes measures that can be used to determine which factor (or factors) plays a dominant role at an individual public-supply well. Case-study examples are used throughout to show how such information can be used to improve water quality. In general, the vulnerability of the water from public-supply wells to contamination is a function of contaminant input within the area that contributes water to a well, the mobility and persistence of a contaminant once released to the groundwater, and the ease of groundwater and contaminant movement from the point of recharge to the open interval of a well. The following measures described in this circular are particularly useful for indicating which contaminants in an aquifer might reach an individual public-supply well and when, how, and at what concentration they might arrive: * Sources of recharge—Information on the sources of recharge for a well provides insight into contaminants that might enter the aquifer with the recharge water and potentially reach the well. * Geochemical conditions—Information on the geochemical conditions encountered by groundwater traveling to a well provides insight into contaminants that might persist in the water all the way to the well. * Groundwater-age mixtures—Information on the ages of the different waters that mix in a well

Extracting Information about the Electronic Quality of Organic Solar-Cell Absorbers from Fill Factor and Thickness

NASA Astrophysics Data System (ADS)

Kaienburg, Pascal; Rau, Uwe; Kirchartz, Thomas

2016-08-01

Understanding the fill factor in organic solar cells remains challenging due to its complex dependence on a multitude of parameters. By means of drift-diffusion simulations, we thoroughly analyze the fill factor of such low-mobility systems and demonstrate its dependence on a collection coefficient defined in this work. We systematically discuss the effect of different recombination mechanisms, space-charge regions, and contact properties. Based on these findings, we are able to interpret the thickness dependence of the fill factor for different experimental studies from the literature. The presented model provides a facile method to extract the photoactive layer's electronic quality which is of particular importance for the fill factor. We illustrate that over the past 15 years, the electronic quality has not been continuously improved, although organic solar-cell efficiencies increased steadily over the same period of time. Only recent reports show the synthesis of polymers for semiconducting films of high electronic quality that are able to produce new efficiency records.

Task-based image quality evaluation of iterative reconstruction methods for low dose CT using computer simulations

NASA Astrophysics Data System (ADS)

Xu, Jingyan; Fuld, Matthew K.; Fung, George S. K.; Tsui, Benjamin M. W.

2015-04-01

Iterative reconstruction (IR) methods for x-ray CT is a promising approach to improve image quality or reduce radiation dose to patients. The goal of this work was to use task based image quality measures and the channelized Hotelling observer (CHO) to evaluate both analytic and IR methods for clinical x-ray CT applications. We performed realistic computer simulations at five radiation dose levels, from a clinical reference low dose D0 to 25% D0. A fixed size and contrast lesion was inserted at different locations into the liver of the XCAT phantom to simulate a weak signal. The simulated data were reconstructed on a commercial CT scanner (SOMATOM Definition Flash; Siemens, Forchheim, Germany) using the vendor-provided analytic (WFBP) and IR (SAFIRE) methods. The reconstructed images were analyzed by CHOs with both rotationally symmetric (RS) and rotationally oriented (RO) channels, and with different numbers of lesion locations (5, 10, and 20) in a signal known exactly (SKE), background known exactly but variable (BKEV) detection task. The area under the receiver operating characteristic curve (AUC) was used as a summary measure to compare the IR and analytic methods; the AUC was also used as the equal performance criterion to derive the potential dose reduction factor of IR. In general, there was a good agreement in the relative AUC values of different reconstruction methods using CHOs with RS and RO channels, although the CHO with RO channels achieved higher AUCs than RS channels. The improvement of IR over analytic methods depends on the dose level. The reference dose level D0 was based on a clinical low dose protocol, lower than the standard dose due to the use of IR methods. At 75% D0, the performance improvement was statistically significant (p < 0.05). The potential dose reduction factor also depended on the detection task. For the SKE/BKEV task involving 10 lesion locations, a dose reduction of at least 25% from D0 was achieved.

Insufficient quality of sputum submitted for tuberculosis diagnosis and associated factors, in Klaten district, Indonesia

PubMed Central

Sakundarno, Mateus; Nurjazuli, Nurjazuli; Jati, Sutopo Patria; Sariningdyah, Retna; Purwadi, Sumarsono; Alisjahbana, Bachti; van der Werf, Marieke J

2009-01-01

Background Sputum smear microscopy is the standard diagnostic method for detection of smear positive pulmonary tuberculosis (TB). Insufficient quality of sputum might result in missing cases. In this study we aimed at assessing the quality of sputum in a district in Central Java and determining patient and health worker factors associated with submission of three good quality sputum samples. Methods In 16 health centers information was collected on the quality of sputum submitted by TB suspects, i.e. volume, color, and viscosity. TB suspects were interviewed to assess their knowledge of TB, motivation to provide sputum and whether they were informed why and how to produce a sputum sample. Health workers were interviewed to assess what information they provided to TB suspects about the reason for sputum examination, methods to produce sputum and characteristics of a good quality sputum sample. All health worker and patient factors were evaluated for association with sputum quality. Results Of 387 TB suspects, 294 (76.0%) could be traced and interviewed, and of 272 (70.3%) information about sputum quality was available. Of those 203 (74.6%) submitted three samples, 90 (33.1%) provided at least one good sample, and 37 (13.6%) provided three good quality sputum samples. Of the 272 TB suspects, 168 (61.8%) mentioned that information on the reason for sputum examination was provided, 66 (24.3%) remembered that they were informed about how to produce sputum and 40 (14.7%) recalled being informed about the characteristics of good quality sputum. Paramedics reported to provide often/always information on the importance of sputum examination, and when to produce sputum. Information on how to produce sputum and characteristics of a good sputum sample was less often provided. None of the studied patient characteristics or health worker factors was associated with providing good quality sputum. Conclusion A considerable number of TB suspects did not provide three sputum samples

Method for determining formation quality factor from seismic data

DOEpatents

Taner, M. Turhan; Treitel, Sven

2005-08-16

A method is disclosed for calculating the quality factor Q from a seismic data trace. The method includes calculating a first and a second minimum phase inverse wavelet at a first and a second time interval along the seismic data trace, synthetically dividing the first wavelet by the second wavelet, Fourier transforming the result of the synthetic division, calculating the logarithm of this quotient of Fourier transforms and determining the slope of a best fit line to the logarithm of the quotient.

Factors Impacting Adult Learner Achievement in a Technology Certificate Program on Computer Networks

ERIC Educational Resources Information Center

Delialioglu, Omer; Cakir, Hasan; Bichelmeyer, Barbara A.; Dennis, Alan R.; Duffy, Thomas M.

2010-01-01

This study investigates the factors impacting the achievement of adult learners in a technology certificate program on computer networks. We studied 2442 participants in 256 institutions. The participants were older than age 18 and were enrolled in the Cisco Certified Network Associate (CCNA) technology training program as "non-degree" or…

Computer applications in scientific balloon quality control

NASA Astrophysics Data System (ADS)

Seely, Loren G.; Smith, Michael S.

Seal defects and seal tensile strength are primary determinants of product quality in scientific balloon manufacturing; they therefore require a unit of quality measure. The availability of inexpensive and powerful data-processing tools can serve as the basis of a quality-trends-discerning analysis of products. The results of one such analysis are presently given in graphic form for use on the production floor. Software descriptions and their sample outputs are presented, together with a summary of overall and long-term effects of these methods on product quality.

A pilot's assessment of helicopter handling-quality factors common to both agility and instrument flying tasks

NASA Technical Reports Server (NTRS)

Gerdes, R. M.

1980-01-01

A series of simulation and flight investigations were undertaken to evaluate helicopter flying qualities and the effects of control system augmentation for nap-of-the-Earth (NOE) agility and instrument flying tasks. Handling quality factors common to both tasks were identified. Precise attitude control was determined to be a key requirement for successful accomplishment of both tasks. Factors that degraded attitude controllability were improper levels of control sensitivity and damping, and rotor system cross coupling due to helicopter angular rate and collective pitch input. Application of rate command, attitude command, and control input decouple augmentation schemes enhanced attitude control and significantly improved handling qualities for both tasks. The NOE agility and instrument flying handling quality considerations, pilot rating philosophy, and supplemental flight evaluations are also discussed.

Health-related quality of life and related factors of military police officers

PubMed Central

2014-01-01

Purpose The present study aimed to determine the effect of demographic characteristics, occupation, anthropometric indices, and leisure-time physical activity levels on coronary risk and health-related quality of life among military police officers from the State of Santa Catarina, Brazil. Methods The sample included 165 military police officers who fulfilled the study’s inclusion criteria. The International Physical Activity Questionnaire and the Short Form Health Survey were used, in addition to a spreadsheet of socio-demographic, occupational and anthropometric data. Statistical analyses were performed using descriptive analysis followed by Spearman Correlation and multiple linear regression analysis using the backward method. Results The waist-to-height ratio was identified as a risk factor low health-related quality of life. In addition, the conicity index, fat percentage, years of service in the military police, minutes of work per day and leisure-time physical activity levels were identified as risk factors for coronary disease among police officers. Conclusions These findings suggest that the Military Police Department should adopt an institutional policy that allows police officers to practice regular physical activity in order to maintain and improve their physical fitness, health, job performance, and quality of life. PMID:24766910

Health-related quality of life and related factors of military police officers.

PubMed

da Silva, Franciele Cascaes; Hernandez, Salma Stéphany Soleman; Arancibia, Beatriz Angélica Valdivia; Castro, Thiago Luis da Silva; Filho, Paulo José Barbosa Gutierres; da Silva, Rudney

2014-04-27

The present study aimed to determine the effect of demographic characteristics, occupation, anthropometric indices, and leisure-time physical activity levels on coronary risk and health-related quality of life among military police officers from the State of Santa Catarina, Brazil. The sample included 165 military police officers who fulfilled the study’s inclusion criteria. The International Physical Activity Questionnaire and the Short Form Health Survey were used, in addition to a spreadsheet of socio-demographic, occupational and anthropometric data. Statistical analyses were performed using descriptive analysis followed by Spearman Correlation and multiple linear regression analysis using the backward method. The waist-to-height ratio was identified as a risk factor low health-related quality of life. In addition, the conicity index, fat percentage, years of service in the military police, minutes of work per day and leisure-time physical activity levels were identified as risk factors for coronary disease among police officers. These findings suggest that the Military Police Department should adopt an institutional policy that allows police officers to practice regular physical activity in order to maintain and improve their physical fitness, health, job performance, and quality of life.

Quality factors in interventional neuroradiology.

PubMed

Lasjaunias, P

2001-01-01

The interest we take in medical economics and strategy is like the one we take in politics: we may scorn politics, but it cannot be denied that it commands our entire life. For this reason, we must try to determine the conditions required to evaluate the quality of interventional neuroradiology, its operators, its practice, its advances, its teaching, and to maintain this quality. It is probably vital to the freedom of our future therapeutic decisions that we contribute effectively to this discussion before the standard is forced upon us by an exclusively economical or administrative logic. On the other hand, any advance can only be turned into progress if it is diffused and applied. There is no doubt that several levels of quality are acceptable, thus the best approach will be to look for and identify the minimum standard for quality or the limits of non-quality. We shall refrain from suggesting that the level of excellence at a given moment should be imposed upon all operators and constitute the standard level of practice. Practice is based on knowledge and competence. The most skilled surgical act cannot guarantee safe medical treatment if it is not supported by sufficient knowledge about the diseases and their symptoms. Mastership of the decision process requires a thorough vision of the therapeutic decision tree involved. Quality is a composition of global view and detailed analysis to allow a fuzzy gestion of the performance. Regardless of the plan chosen, openmindedness should be kept to allow adaptation, correction or interruption of a given therapeutic process in view of unpredicted pieces of information. Such input is a predictable possibility that should be explained to the patient prior to starting the procedure. Dealing with human beings, the attitude along with the technical management will be of paramount importance in the overall quality assessment.

Biophysics of NASA radiation quality factors.

PubMed

Cucinotta, Francis A

2015-09-01

NASA has implemented new radiation quality factors (QFs) for projecting cancer risks from space radiation exposures to astronauts. The NASA QFs are based on particle track structure concepts with parameters derived from available radiobiology data, and NASA introduces distinct QFs for solid cancer and leukaemia risk estimates. The NASA model was reviewed by the US National Research Council and approved for use by NASA for risk assessment for International Space Station missions and trade studies of future exploration missions to Mars and other destinations. A key feature of the NASA QFs is to represent the uncertainty in the QF assessments and evaluate the importance of the QF uncertainty to overall uncertainties in cancer risk projections. In this article, the biophysical basis for the probability distribution functions representing QF uncertainties was reviewed, and approaches needed to reduce uncertainties were discussed. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

[Quality of life and its influential factors of children and adolescents with congenital cleft lip and palate].

PubMed

Zhou, Meng; Liu, Zong-xiang; Wang, Peng-lai; Liu, Chao

2016-02-01

To investigate the quality of life of children undergoing clef lip or and palate repair as well as the influential factors of the quality of life, and provide theoretical foundation for future studies such as psychological interventions. Totally 164 children and young adolescent patients with cleft lip and palate undergoing maxillofacial surgery and orthodontic treatment in Xuzhou Stomatology Hospital were selected as experimental group, and 102 normal children and young adolescents were selected as control group. Both groups were investigated by general information questionnaire and child and adolescents' quality of life scale (CAQOL). The results were analyzed and the influential factors on quality of life were evaluated by multivariate regression analysis with SPSS 19.0 software package. The overall CAQOL scores and most of the subscale scores (teacher-student relationship, peer relationships, parent-child relationship, self-awareness, physical discomfort, negative emotions, attitude about homework, access to transportation from home, extra curricular activities, self-esteem) in the experimental group were significantly lower compared with the control group (P<0.05). Single factor analysis of the quality of life showed that there was no significant difference between gender distribution; on the contrary, residential areas, parents' level of education, the main caregivers, family income and types of the disease had significant difference (P<0.05). Multiple linear regression equation showed that mother's education level of patients, cleft lip and palate category, family income, the main caregivers and residential areas were the important influential factors on children' quality of life. Among them, the type of disease was the most important influential factor (beta=0.260), followed by mother's education level (beta=0.215). The quality of life of children with cleft lip/palate is poor. Patients' scores of CAQOL are closely related with mothers' education level

[Degree of dry mouth and factors influencing oral health-related quality of life for community-dwelling elders].

PubMed

Park, Myung Sook; Ryu, Se Ang

2010-10-01

This study was conducted to investigate the degree of dry mouth and oral health-related quality of life and to identify factors contributing to oral health-related quality of life for community-dwelling elders. A descriptive correlational study design was used. Participants were 156 older adults from two senior welfare centers. Data were collected on February 21, 22 and 29, 30, 2009 using structured questionnaires. Enter type multiple regression analysis was used to identify factors influencing oral health-related quality of life according to general and oral health characteristics. There were significant differences in oral health-related quality of life according to living arrangement, insurance, smoking, number of natural teeth, and denture type. The oral health-related quality of life had significant correlations with the number of chronic disease, number of medications, and dry mouth. Factors influencing oral health-related quality of life for community-dwelling older adults were dry mouth, number of chronic disease, and medical aid, which explained about 47.9% of total variance. These results indicate that in order to promote oral health-related quality of life for older adults, prevention or management of chronic diseases as well as oral health and dry mouth are needed for this population, and especially economically poor elders.

Design and Measurement of a Digital Phase Locked BWO for Accurately Extracting the Quality Factors in a Biconcave Resonator System

NASA Astrophysics Data System (ADS)

Gao, Yuanci; Charles, Jones R.; Yu, Guofen; Jyotsna, Dutta M.

2012-03-01

A long loop phase locked backward-wave oscillator (BWO) for a high quality factor resonator system operating at D-band frequencies (130-170GHz) was described, the phase noise of the phased locked BWO was analyzed and measured at typical frequencies. When it used with a high quality factor open resonator for measuring the quality factor of simple harmonic resonators based on the magnitude transfer characteristic, this system has proven to be capable of accurate measuring the quality factor as high as 0.8 million with an uncertainty of less than 1.3% (Lorentzian fitting) at typical frequencies in the range of 130GHz-170GHz.

Identification of factors affecting colostrum quality of dairy Lacaune ewes assessed with the Brix refractometer.

PubMed

Torres-Rovira, Laura; Pesantez-Pacheco, Jose-Luis; Hernandez, Fernando; Elvira-Partida, Laura; Perez-Solana, Maria-Luz; Gonzalez-Martin, Juan-Vicente; Gonzalez-Bulnes, Antonio; Astiz, Susana

2017-11-01

In this Research Communication we assessed factors affecting colostrum quality of dairy Lacaune ewes using the Brix-refractometer. Colostrum from 536 lambings from one commercial intensive dairy Lacaune farm were analysed for the following factors with potential influence in colostrum quality: (1) ewe parity (n = 84-132), (2) length of previous dry period (PDP) (n = 23-214), (3) age at first lambing (AFL) of primiparous ewes (n = 9-88), (4) lambing season (n = 192 or 344), and (5) year (2011-2013, n = 142-203). Parity significantly affected colostrum quality, with primiparous ewes showing the highest Brix refractometer values (22·6 ± 5·6%, P < 0·0001), though values were similar among multiparous ewes. PDP length also significantly affected colostrum quality: ewes with the shortest PDP showed the worst quality (16·8 ± 4·2%, P < 0·0001), with quality gradually rising with PDP length. Colostrum quality was significantly higher in 2011 (21·0 ± 5·2%) than in 2012 or 2013 (P < 0·0001); this likely reflects the several-fold greater proportion of animals with long PDP in 2011. In contrast, neither AFL nor lambing season significantly affected colostrum quality. These results suggest that parity and PDP length can substantially affect ovine colostrum quality of dairy ewes under intensive management conditions and they further show the usefulness of the Brix refractometer for providing a rough estimation of colostrum quality on-farm. However, further studies are needed to determine a validated cut-off Brix value for identifying good-quality colostra in ovine species.

[Spatial distribution characteristics of China cotton fiber quality and climatic factors based on GIS].

PubMed

Xiong, Zong-Wei; Gu, Sheng-Hao; Mao, Li-Li; Wang, Xue-Jiao; Zhang, Li-Zhen; Zhou, Zhi-Guo

2012-12-01

By using geographical information system (GIS), the cotton fiber quality data from 2005 to 2011 and the daily meteorological data from 1981 to 2010 at 82 sites (counties and cities) in China major cotton production regions were collected and treated with spatial interpolation. The spatial information system of cotton fiber quality in China major cotton production regions was established based on GIS, and the spatial distribution characteristics of the cotton fiber quality and their relationships with the local climatic factors were analyzed. In the northwest region (especially Xinjiang) of China, due to the abundant sunlight, low precipitation, and low relative humidity, the cotton fiber length, micronaire, and grade ranked the first. In the Yangtze River region and Yellow River region, the specific strength of cotton fiber was higher, and in the Yangtze River region, the cotton fiber length and specific strength were higher, while the micronaire and grade were lower than those in the Yellow River region. The cotton fiber quality was closely related to the climate factors such as temperature, sunlight, rainfall, and humidity.

Clinical assessment of bone quality of human extraction sockets after conversion with growth factors.

PubMed

Ntounis, Athanasios; Geurs, Nico; Vassilopoulos, Philip; Reddy, Michael

2015-01-01

The study was conducted to evaluate the effect of mineralized freeze-dried bone allograft (FDBA), alone or in combination with growth factors in extraction sockets, on subjective assessment of bone quality during implant placement. Forty-one patients whose treatment plan involved extraction of anterior or premolar teeth were randomized into four groups: Group 1, collagen plug (control); Group 2, FDBA/β-tricalcium phosphate (β-TCP)/collagen plug; Group 3, FDBA/β-TCP/platelet-rich plasma (PRP)/collagen plug; Group 4, FDBA/β-TCP/recombinant human platelet-derived growth factor BB (rhPDGF-BB)/collagen plug. After 8 weeks of healing, implants were placed. The clinicians assessed bone quality according to the Misch classification. A benchtop calibration exercise test was conducted to evaluate agreement and accuracy of operators in recognizing different bone qualities. Differences were analyzed using one-way analysis of variance (ANOVA) or chi-square tests for continuous and categorical data. Pairwise comparisons were tested using least squares means (LS means). Spearman correlation coefficients were used to evaluate the relationship of bone growth with potential confounders. P < .05 was considered statistically significant. A simple (not weighted) kappa statistic was used to assess the agreement between raters. To assess accuracy in identifying bone quality, a chi-square test was used to compare the percent correct for each rater. The benchtop calibration exercise test demonstrated agreement among clinicians (0.75 and 0.92 between raters 1 and 2 and raters 1 and 3, respectively). Raters were more likely to identify the correct bone quality (P > .05). Inclusion of bone grafting is associated with a shift from D4 quality to D3 quality bone. Inclusion of PRP in bone grafting eliminates the incidence of D4 bone, establishing D3 and D2 quality bone as prevalent (56% vs. 42%, respectively). Inclusion of rhPDGF-BB and β-TCP in combination with the bone grafting has the

Influence of fundamental mode fill factor on disk laser output power and laser beam quality

NASA Astrophysics Data System (ADS)

Cheng, Zhiyong; Yang, Zhuo; Shao, Xichun; Li, Wei; Zhu, Mengzhen

2017-11-01

An three-dimensional numerical model based on finite element method and Fox-Li method with angular spectrum diffraction theoy is developed to calculate the output power and power density distribution of Yb:YAG disk laser. We invest the influence of fundamental mode fill factor(the ratio of fundamental mode size and pump spot size) on the output power and laser beam quality. Due to aspherical aberration and soft aperture effect in laser disk, high beam quality can be achieve with relative lower efficiency. The highest output power of fundamental laser mode is influenced by the fundamental mode fill factor. Besides we find that optimal mode fill factor increase with pump spot size.

A path analysis study of factors influencing hospital staff perceptions of quality of care factors associated with patient satisfaction and patient experience.

PubMed

Leggat, Sandra G; Karimi, Leila; Bartram, Timothy

2017-11-16

Hospital staff are interested in information on patient satisfaction and patient experience that can help them improve quality of care. Staff perceptions of quality of care have been identified as useful proxies when patient data are not available. This study explores the organizational factors and staff attitudes that influence staff perceptions of the quality of the care they provide in relation to patient satisfaction and patient experience. Cross sectional survey completed by 258 staff of a large multi-campus, integrated metropolitan hospital in Australia. Structured equation modelling was used to analyse the data. Our data suggest that different perceived organizational factors and staff attitudes contribute to different pathways for patient satisfaction and patient experience indicators. Hospital staff in our sample were more likely to indicate they provided the care that would result in higher patient satisfaction if they felt empowered within a psychologically safe environment. Conversely their views on patient experience were related to their commitment towards their hospital. There was no relationship between the staff perceptions of patient satisfaction and the staff response to the friends and family test. This study provides empirical evidence that staff perceptions of the quality of care they provide that is seen to be related to patient satisfaction and patient experience are enacted through different pathways that reflect differing perceptions of organizational factors and workplace psychological attitudes.

National Assessment of Data Quality and Associated Systems-Level Factors in Malawi

PubMed Central

O'Hagan, Richael; Marx, Melissa A; Finnegan, Karen E; Naphini, Patrick; Ng'ambi, Kumbukani; Laija, Kingsley; Wilson, Emily; Park, Lois; Wachepa, Sautso; Smith, Joseph; Gombwa, Lewis; Misomali, Amos; Mleme, Tiope; Yosefe, Simeon

2017-01-01

ABSTRACT Background: Routine health data can guide health systems improvements, but poor quality of these data hinders use. To address concerns about data quality in Malawi, the Ministry of Health and National Statistical Office conducted a data quality assessment (DQA) in July 2016 to identify systems-level factors that could be improved. Methods: We used 2-stage stratified random sampling methods to select health centers and hospitals under Ministry of Health auspices, included those managed by faith-based entities, for this DQA. Dispensaries, village clinics, police and military facilities, tertiary-level hospitals, and private facilities were excluded. We reviewed client registers and monthly reports to verify availability, completeness, and accuracy of data in 4 service areas: antenatal care (ANC), family planning, HIV testing and counseling, and acute respiratory infection (ARI). We also conducted interviews with facility and district personnel to assess health management information system (HMIS) functioning and systems-level factors that may be associated with data quality. We compared systems and quality factors by facility characteristics using 2-sample t tests with Welch's approximation, and calculated verification ratios comparing total entries in registers to totals from summarized reports. Results: We selected 16 hospitals (of 113 total in Malawi), 90 health centers (of 466), and 16 district health offices (of 28) in 16 of Malawi's 28 districts. Nearly all registers were available and complete in health centers and district hospitals, but data quality varied across service areas; median verification ratios comparing register and report totals at health centers ranged from 0.78 (interquartile range [IQR]: 0.25, 1.07) for ARI and 0.99 (IQR: 0.82, 1.36) for family planning to 1.00 (IQR: 0.96, 1.00) for HIV testing and counseling and 1.00 (IQR: 0.80, 1.23) for ANC. More than half (60%) of facilities reported receiving a documented supervisory visit for

Fitting relationship between the beam quality β factor of high-energy laser and the wavefront aberration of laser beam

NASA Astrophysics Data System (ADS)

Ji, Zhong-Ye; Zhang, Xiao-Fang

2018-01-01

The mathematical relation between the beam quality β factor of high-energy laser and the wavefront aberration of laser beam is important in beam quality control theory of the high-energy laser weapon system. In order to obtain this mathematical relation, numerical simulation is used in the research. Firstly, the Zernike representations of typically distorted atmospheric wavefront aberrations caused by the Kolmogoroff turbulence are generated. And then, the corresponding beam quality β factors of the different distorted wavefronts are calculated numerically through fast Fourier transform. Thus, the statistical distribution rule between the beam quality β factors of high-energy laser and the wavefront aberrations of the beam can be established by the calculated results. Finally, curve fitting method is chosen to establish the mathematical fitting relationship of these two parameters. And the result of the curve fitting shows that there is a quadratic curve relation between the beam quality β factor of high-energy laser and the wavefront aberration of laser beam. And in this paper, 3 fitting curves, in which the wavefront aberrations are consisted of Zernike Polynomials of 20, 36, 60 orders individually, are established to express the relationship between the beam quality β factor and atmospheric wavefront aberrations with different spatial frequency.

Prediction of quality attributes of chicken breast fillets by using Vis/NIR spectroscopy combined with factor analysis method

USDA-ARS?s Scientific Manuscript database

Visible/near-infrared (Vis/NIR) spectroscopy with wavelength range between 400 and 2500 nm combined with factor analysis method was tested to predict quality attributes of chicken breast fillets. Quality attributes, including color (L*, a*, b*), pH, and drip loss were analyzed using factor analysis ...

Adjusting for cross-cultural differences in computer-adaptive tests of quality of life.

PubMed

Gibbons, C J; Skevington, S M

2018-04-01

Previous studies using the WHOQOL measures have demonstrated that the relationship between individual items and the underlying quality of life (QoL) construct may differ between cultures. If unaccounted for, these differing relationships can lead to measurement bias which, in turn, can undermine the reliability of results. We used item response theory (IRT) to assess differential item functioning (DIF) in WHOQOL data from diverse language versions collected in UK, Zimbabwe, Russia, and India (total N = 1332). Data were fitted to the partial credit 'Rasch' model. We used four item banks previously derived from the WHOQOL-100 measure, which provided excellent measurement for physical, psychological, social, and environmental quality of life domains (40 items overall). Cross-cultural differential item functioning was assessed using analysis of variance for item residuals and post hoc Tukey tests. Simulated computer-adaptive tests (CATs) were conducted to assess the efficiency and precision of the four items banks. Splitting item parameters by DIF results in four linked item banks without DIF or other breaches of IRT model assumptions. Simulated CATs were more precise and efficient than longer paper-based alternatives. Assessing differential item functioning using item response theory can identify measurement invariance between cultures which, if uncontrolled, may undermine accurate comparisons in computer-adaptive testing assessments of QoL. We demonstrate how compensating for DIF using item anchoring allowed data from all four countries to be compared on a common metric, thus facilitating assessments which were both sensitive to cultural nuance and comparable between countries.

Factors associated with quality of life in active childhood epilepsy: a population-based study.

PubMed

Reilly, Colin; Atkinson, Patricia; Das, Krishna B; Chin, Richard F M; Aylett, Sarah E; Burch, Victoria; Gillberg, Christopher; Scott, Rod C; Neville, Brian G R

2015-05-01

Improving health-related quality of life (HRQOL), rather than just reducing seizures, should be the principal goal in comprehensive management of childhood epilepsy. There is a lack of population-based data on predictors of HRQOL in childhood epilepsy. The Children with Epilepsy in Sussex Schools (CHESS) study is a prospective, population-based study involving school-aged children (5-15 years) with active epilepsy (on one or more AED and/or had a seizure in the last year) in a defined geographical area in the UK. Eighty-five of 115 (74% of eligible population) children underwent comprehensive psychological assessment including measures of cognition, behaviour, and motor functioning. Parents of the children completed the Quality of Life in Childhood Epilepsy (QOLCE).Clinical data on eligible children was extracted using a standardised pro forma. Linear regression analysis was undertaken to identify factors significantly associated with total Quality of Life in this population. Factors independently significantly associated (p < .05) with total QOLCE scores were seizures before 24 months, cognitive impairment (IQ < 85), anxiety, and parent reported school attendance difficulty. These factors were also significantly associated with total QOLCE when children with IQ < 50 were excluded from analysis. The majority of factors associated with parent reported HRQOL in active childhood epilepsy are related to neurobehavioural and/or psychosocial aspects of the condition. Copyright © 2015 European Paediatric Neurology Society. Published by Elsevier Ltd. All rights reserved.

Microcumpter computation of water quality discharges

USGS Publications Warehouse

Helsel, Dennis R.

1983-01-01

A fully prompted program (SEDQ) has been developed to calculate daily and instantaneous water quality (QW) discharges. It is written in a version of BASIC, and requires inputs of gage heights, discharge rating curve, shifts, and water quality concentration information. Concentration plots may be modified interactively using the display screen. Semi-logarithmic plots of concentration and water quality discharge are output to the display screen, and optionally to plotters. A summary table of data is also output. SEDQ could be a model program for micro and minicomputer systems likely to be in use within the Water Resources Division, USGS, in the near future. The daily discharge-weighted mean concentration is one output from SEDQ. It is defined in this report, differentiated from the currently used mean concentration, and designated the ' equivalent concentration. ' (USGS)

Computer Vision Syndrome and Associated Factors Among Medical and Engineering Students in Chennai

PubMed Central

Logaraj, M; Madhupriya, V; Hegde, SK

2014-01-01

Background: Almost all institutions, colleges, universities and homes today were using computer regularly. Very little research has been carried out on Indian users especially among college students the effects of computer use on the eye and vision related problems. Aim: The aim of this study was to assess the prevalence of computer vision syndrome (CVS) among medical and engineering students and the factors associated with the same. Subjects and Methods: A cross-sectional study was conducted among medical and engineering college students of a University situated in the suburban area of Chennai. Students who used computer in the month preceding the date of study were included in the study. The participants were surveyed using pre-tested structured questionnaire. Results: Among engineering students, the prevalence of CVS was found to be 81.9% (176/215) while among medical students; it was found to be 78.6% (158/201). A significantly higher proportion of engineering students 40.9% (88/215) used computers for 4-6 h/day as compared to medical students 10% (20/201) (P < 0.001). The reported symptoms of CVS were higher among engineering students compared with medical students. Students who used computer for 4-6 h were at significantly higher risk of developing redness (OR = 1.2, 95% CI = 1.0-3.1,P = 0.04), burning sensation (OR = 2.1,95% CI = 1.3-3.1, P < 0.01) and dry eyes (OR = 1.8, 95% CI = 1.1-2.9, P = 0.02) compared to those who used computer for less than 4 h. Significant correlation was found between increased hours of computer use and the symptoms redness, burning sensation, blurred vision and dry eyes. Conclusion: The present study revealed that more than three-fourth of the students complained of any one of the symptoms of CVS while working on the computer. PMID:24761234

Computer vision syndrome and associated factors among medical and engineering students in chennai.

PubMed

Logaraj, M; Madhupriya, V; Hegde, Sk

2014-03-01

Almost all institutions, colleges, universities and homes today were using computer regularly. Very little research has been carried out on Indian users especially among college students the effects of computer use on the eye and vision related problems. The aim of this study was to assess the prevalence of computer vision syndrome (CVS) among medical and engineering students and the factors associated with the same. A cross-sectional study was conducted among medical and engineering college students of a University situated in the suburban area of Chennai. Students who used computer in the month preceding the date of study were included in the study. The participants were surveyed using pre-tested structured questionnaire. Among engineering students, the prevalence of CVS was found to be 81.9% (176/215) while among medical students; it was found to be 78.6% (158/201). A significantly higher proportion of engineering students 40.9% (88/215) used computers for 4-6 h/day as compared to medical students 10% (20/201) (P < 0.001). The reported symptoms of CVS were higher among engineering students compared with medical students. Students who used computer for 4-6 h were at significantly higher risk of developing redness (OR = 1.2, 95% CI = 1.0-3.1,P = 0.04), burning sensation (OR = 2.1,95% CI = 1.3-3.1, P < 0.01) and dry eyes (OR = 1.8, 95% CI = 1.1-2.9, P = 0.02) compared to those who used computer for less than 4 h. Significant correlation was found between increased hours of computer use and the symptoms redness, burning sensation, blurred vision and dry eyes. The present study revealed that more than three-fourth of the students complained of any one of the symptoms of CVS while working on the computer.

The Role of Gender in Students' Ratings of Teaching Quality in Computer Science and Environmental Engineering

ERIC Educational Resources Information Center

Price, Linda; Svensson, Ingrid; Borell, Jonas; Richardson, John T. E.

2017-01-01

Students' ratings of teaching quality on course units in a computer science program and an environmental engineering program at a large Swedish university were obtained using the Course Experience Questionnaire; 8888 sets of ratings were obtained from men and 4280 sets were obtained from women over ten academic years. These student ratings from…

Upper extremity musculoskeletal discomfort among occupational notebook personal computer users: work interference, associations with risk factors and the use of notebook computer stand and docking station.

PubMed

Erdinc, Oguzhan

2011-01-01

This study explored the prevalence and work interference (WI) of upper extremity musculoskeletal discomfort (UEMSD) and investigated the associations of individual and work-related risk factors and using a notebook stand or docking station with UEMSD among symptomatic occupational notebook personal computer (PC) users. The participant group included 45 Turkish occupational notebook PC users. The study used self-reports of participants. The Turkish version of the Cornell Musculoskeletal Discomfort Questionnaire (T-CMDQ) was used to collect symptom data. UEMSD prevailed mostly in the neck, the upper back, and the lower back with prevalence rates of 77.8%, 73.3%, and 60.0% respectively, and with WI rates of 28.9%, 24.4%, and 26.7% respectively. Aggregated results showed that 44% of participants reported WI due to UEMSD in at least one body region. Significant risk factors were: being female, being aged <31 years, having computer work experience <10 years, and physical discomfort during computer use. UEMSD prevalence and WI rates were considerable in the neck, the upper back, and the lower back. Significant associations between certain risk factors and UEMSD were identified, but no association was found between using notebook stand and docking station and UEMSD among participants.

A pilot's assessment of helicopter handling-quality factors common to both agility and instrument flying tasks

NASA Technical Reports Server (NTRS)

Gerdes, R. M.

1980-01-01

Results from a series of simulation and flight investigations undertaken to evaluate helicopter flying qualities and the effects of control system augmentation for nap-of-the-earth (NOE) agility and instrument flying tasks were analyzed to assess handling-quality factors common to both tasks. Precise attitude control was determined to be a key requirement for successful accomplishment of both tasks. Factors that degraded attitude controllability were improper levels of control sensitivity and damping and rotor-system cross-coupling due to helicopter angular rate and collective pitch input. Application of rate-command, attitude-command, and control-input decouple augmentation schemes enhanced attitude control and significantly improved handling qualities for both tasks. NOE agility and instrument flying handling-quality considerations, pilot rating philosophy, and supplemental flight evaluations are also discussed.

A comparative trial of paper-and-pencil versus computer administration of the Quality of Life in Reflux and Dyspepsia (QOLRAD) questionnaire.

PubMed

Kleinman, L; Leidy, N K; Crawley, J; Bonomi, A; Schoenfeld, P

2001-02-01

Although most health-related quality of life questionnaires are self-administered by means of paper and pencil, new technologies for automated computer administration are becoming more readily available. Novel methods of instrument administration must be assessed for score equivalence in addition to consistency in reliability and validity. The present study compared the psychometric characteristics (score equivalence and structure, internal consistency, and reproducibility reliability and construct validity) of the Quality of Life in Reflux And Dyspepsia (QOLRAD) questionnaire when self-administered by means of paper and pencil versus touch-screen computer. The influence of age, education, and prior experience with computers on score equivalence was also examined. This crossover trial randomized 134 patients with gastroesophageal reflux disease to 1 of 2 groups: paper-and-pencil questionnaire administration followed by computer administration or computer administration followed by use of paper and pencil. To minimize learning effects and respondent fatigue, administrations were scheduled 3 days apart. A random sample of 32 patients participated in a 1-week reproducibility evaluation of the computer-administered QOLRAD. QOLRAD scores were equivalent across the 2 methods of administration regardless of subject age, education, and prior computer use. Internal consistency levels were very high (alpha = 0.93-0.99). Interscale correlations were strong and generally consistent across methods (r = 0.7-0.87). Correlations between the QOLRAD and Short Form 36 (SF-36) were high, with no significant differences by method. Test-retest reliability of the computer-administered QOLRAD was also very high (ICC = 0.93-0.96). Results of the present study suggest that the QOLRAD is reliable and valid when self-administered by means of computer touch-screen or paper and pencil.

Single-crystal diamond nanomechanical resonators with quality factors exceeding one million

NASA Astrophysics Data System (ADS)

Tao, Y.; Boss, J. M.; Moores, B. A.; Degen, C. L.

2014-04-01

Diamond has gained a reputation as a uniquely versatile material, yet one that is intricate to grow and process. Resonating nanostructures made of single-crystal diamond are expected to possess excellent mechanical properties, including high-quality factors and low dissipation. Here we demonstrate batch fabrication and mechanical measurements of single-crystal diamond cantilevers with thickness down to 85 nm, thickness uniformity better than 20 nm and lateral dimensions up to 240 μm. Quality factors exceeding one million are found at room temperature, surpassing those of state-of-the-art single-crystal silicon cantilevers of similar dimensions by roughly an order of magnitude. The corresponding thermal force noise for the best cantilevers is ~5·10-19 N Hz-1/2 at millikelvin temperatures. Single-crystal diamond could thus directly improve existing force and mass sensors by a simple substitution of resonator material. Presented methods are easily adapted for fabrication of nanoelectromechanical systems, optomechanical resonators or nanophotonic devices that may lead to new applications in classical and quantum science.

Position of document holder and work related risk factors for neck pain among computer users: a narrative review.

PubMed

Ambusam, S; Baharudin, O; Roslizawati, N; Leonard, J

2015-01-01

Document holder is used as a remedy to address occupational neck pain among computer users. An understanding on the effects of the document holder along with other work related risk factors while working in computer workstation requires attention. A comprehensive knowledge on the optimal location of the document holder in computer use and associated work related factors that may contribute to neck pain reviewed in this article. A literature search has been conducted over the past 14 years based on the published articles from January 1990 to January 2014 in both Science Direct and PubMed databases. Medical Subject Headings (MeSH) keywords for search were neck muscle OR head posture OR muscle tension' OR muscle activity OR work related disorders OR neck pain AND/OR document location OR document holder OR source document OR copy screen holder.Document holder placed lateral to the screen was most preferred to reduce neck discomfort among occupational typists. Document without a holder was placed flat on the surface is least preferred. The head posture and muscle activity increases when the document is placed flat on the surface compared to when placed on the document holder. Work related factors such as static posture, repetitive movement, prolong sitting and awkward positions were the risk factors for chronic neck pain. This review highlights the optimal location for document holder for computer users to reduce neck pain. Together, the importance of work related risk factors for to neck pain on occupational typist is emphasized for the clinical management.

Development and application of a complex numerical model and software for the computation of dose conversion factors for radon progenies.

PubMed

Farkas, Árpád; Balásházy, Imre

2015-04-01

A more exact determination of dose conversion factors associated with radon progeny inhalation was possible due to the advancements in epidemiological health risk estimates in the last years. The enhancement of computational power and the development of numerical techniques allow computing dose conversion factors with increasing reliability. The objective of this study was to develop an integrated model and software based on a self-developed airway deposition code, an own bronchial dosimetry model and the computational methods accepted by International Commission on Radiological Protection (ICRP) to calculate dose conversion coefficients for different exposure conditions. The model was tested by its application for exposure and breathing conditions characteristic of mines and homes. The dose conversion factors were 8 and 16 mSv WLM(-1) for homes and mines when applying a stochastic deposition model combined with the ICRP dosimetry model (named PM-A model), and 9 and 17 mSv WLM(-1) when applying the same deposition model combined with authors' bronchial dosimetry model and the ICRP bronchiolar and alveolar-interstitial dosimetry model (called PM-B model). User friendly software for the computation of dose conversion factors has also been developed. The software allows one to compute conversion factors for a large range of exposure and breathing parameters and to perform sensitivity analyses. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

The influence of body mass index, age, implants, and dental restorations on image quality of cone beam computed tomography.

PubMed

Ritter, Lutz; Mischkowski, Robert A; Neugebauer, Jörg; Dreiseidler, Timo; Scheer, Martin; Keeve, Erwin; Zöller, Joachim E

2009-09-01

The aim was to determine the influence of patient age, gender, body mass index (BMI), amount of dental restorations, and implants on image quality of cone-beam computerized tomography (CBCT). Fifty CBCT scans of a preretail version of Galileos (Sirona, Germany) were investigated retrospectively by 4 observers regarding image quality of 6 anatomic structures, pathologic findings detection, subjective exposure quality, and artifacts. Patient age, BMI, gender, amount of dental restorations, and implants were recorded and statistically tested for correlations to image quality. A negative effect on image quality was found statistically significantly correlated with age and the amount of dental restorations. None of the investigated image features were garbled by any of the investigated influence factors. Age and the amount of dental restorations appear to have a negative impact on CBCT image quality, whereas gender and BMI do not. Image quality of mental foramen, mandibular canal, and nasal floor are affected negatively by age but not by the amount of dental restorations. Further studies are required to elucidate influence factors on CBCT image quality.

Resident attractiveness: an influential factor in the quality of care in nursing homes.

PubMed

Campbell, Sara L

2005-08-01

Studying the characteristics considered attractive in residents in long-term care can provide an innovative picture of how nursing staff may perceive and inadvertently respond to residents based on those characteristics. It may be difficult to believe that attractiveness can affect the quality of residents' care. However, being open to the discovery of all factors that may influence the quality of care is important to promote positive changes in resident outcomes in nursing homes.

Prevalence and factors associated with poor sleep quality among secondary school teachers in a developing country.

PubMed

Musa, Nor Asma; Moy, Foong Ming; Wong, Li Ping

2018-05-31

This study aimed to determine the prevalence and factors associated with poor sleep quality among secondary school teachers in the state of Selangor, Malaysia. This was a cross sectional study, conducted in two phases. Phase I tested the reliability of the Pittsburgh Sleep Quality Index in the Malay language (M-PSQI), whereas Phase II determined the prevalence and factors associated with poor sleep quality where a total of 1871 secondary school teachers were studied. Participants were recruited using multistage sampling. Self-administered questionnaire was used to collect data on socio-demographic and teaching characteristics, comorbidities and characteristics of sleep. The M-PSQI was used to measure sleep quality. The Depression Anxiety Stress Scale-21 was used to measure mental health status. Results showed that the M-PSQI had a good internal consistency and moderate reliability. The prevalence of poor sleep quality was 61 (95% CI: 54-67) %. Total teaching hours/day, depression and stress were significantly associated with poor sleep quality in the univariate analysis, while only stress (OR 1.04; 95% CI 1.02-1.05%) remained significant in the multivariate analyses. In conclusion, stress level of the secondary school teachers should be reduced to improve sleep quality.

QALMA: A computational toolkit for the analysis of quality protocols for medical linear accelerators in radiation therapy

NASA Astrophysics Data System (ADS)

Rahman, Md Mushfiqur; Lei, Yu; Kalantzis, Georgios

2018-01-01

Quality Assurance (QA) for medical linear accelerator (linac) is one of the primary concerns in external beam radiation Therapy. Continued advancements in clinical accelerators and computer control technology make the QA procedures more complex and time consuming which often, adequate software accompanied with specific phantoms is required. To ameliorate that matter, we introduce QALMA (Quality Assurance for Linac with MATLAB), a MALAB toolkit which aims to simplify the quantitative analysis of QA for linac which includes Star-Shot analysis, Picket Fence test, Winston-Lutz test, Multileaf Collimator (MLC) log file analysis and verification of light & radiation field coincidence test.

Rating educational quality: factors in the erosion of professional standards.

PubMed

Albanese, M

1999-06-01

Changes in the health care environment are putting increasing pressure on medical schools to make faculty accountable and to document the quality of the medical education they provide. Faculty's ratings of students' performances and students' ratings of faculty's teaching are important elements in these efforts to document educational quality. This article discusses selected research related to factors affecting raters' judgments, analyzes how changes in the health care environment are influencing such judgments, and links these influences to the system that upholds professional standards. Ratings are known to have a positive bias (generosity error), provide limited discrimination, and often fail to document serious deficits. The potential sources of these problems relate to the mechanics of the rating task, the system used to obtain ratings, and factors affecting rater judgment. As managed care demands reduce the time faculty have for teaching, as system-wide disincentives to provide negative ratings proliferate, and as social engineering challenges, such as the Americans with Disabilities Act, impose differential standards for students, the natural tendency to avoid giving negative ratings becomes even harder to resist. Ultimately, these forces compromise the capability of faculty to uphold the standards of the profession. The author calls for a national effort to stem the erosion of those standards.

Influence of Socioeconomic Factors on Daily Life Activities and Quality of Life of Thai Elderly

PubMed Central

Somrongthong, Ratana; Wongchalee, Sunanta; Ramakrishnan, Chandrika; Hongthong, Donnapa; Yodmai, Korravarn; Wongtongkam, Nualnong

2017-01-01

Background The increasing number of older people is a significant issue in Thailand, resulted in growing demands of health and social welfare services. The study aim was to explore the influence of socioeconomic factors on activities of daily living and quality of life of Thai seniors. Design and methods Using randomised cluster sampling, one province was sampled from each of the Central, North, Northeast and South regions, then one subdistrict sampled in each province, and a household survey used to identify the sample of 1678 seniors aged 60 years and over. The Mann-Whitney U-test and binary logistic regression were used to compare and determine the association of socioeconomic variables on quality of life and activities of daily living. Results The findings showed that sociodemographic and socioeconomic factors were significantly related to functional capacity of daily living. Education levels were strongly associated with daily life activities, with 3.55 adjusted ORs for respondents with secondary school education. Gender was important, with females comprising 61% of dependent respondents but only 47% of independent respondents. Seniors with low incomes were more likely to be anxious in the past, present and future and less likely to accept death in the late stage, with 1.40 Adjusted ORs (95%CI: 1.02-1.92), and 0.72 (95%CI: 0.53-0.98), respectively. However, they were more likely to engage in social activities. Conclusions While socioeconomic factors strongly indicated the functional capacity to live independently, a good quality of life also required other factors leading to happiness and life satisfaction. Significance for public health Increasing numbers of ageing population raise a public health concern in Thai society due to the increasing demands of medical and health services regarding chronic diseases and disability. Unfortunately, few studies have mentioned socioeconomic factors on daily living activities and quality of life and none has taken place

Current good manufacturing practices, quality control procedures, quality factors, notification requirements, and records and reports, for infant formula. Final rule.

PubMed

2014-06-10

The Food and Drug Administration (FDA or we) is issuing a final rule that adopts, with some modifications, the interim final rule (IFR) entitled "Current Good Manufacturing Practices, Quality Control Procedures, Quality Factors, Notification Requirements, and Records and Reports, for Infant Formula'' (February 10, 2014). This final rule affirms the IFR's changes to FDA's regulations and provides additional modifications and clarifications. The final rule also responds to certain comments submitted in response to the request for comments in the IFR.

Prevalence of poor sleep quality, sleepiness and obstructive sleep apnoea risk factors in athletes.

PubMed

Swinbourne, Richard; Gill, Nicholas; Vaile, Joanna; Smart, Daniel

2016-10-01

Despite the perceived importance of sleep for athletes, little is known regarding athlete sleep quality, their prevalence of daytime sleepiness or risk factors for obstructive sleep apnoea (OSA) such as snoring and witnessed apnoeic episodes. The purpose of the present study was to characterise normative sleep quality among highly trained team sport athletes. 175 elite or highly trained rugby sevens, rugby union and cricket athletes completed the Pittsburgh Sleep Quality Index (PSQI), Epworth Sleepiness Score (ESS) and Quality of Life questionnaires and an OSA risk factor screen. On average, athletes reported 7.9 ± 1.3 h of sleep per night. The average PSQI score was 5.9 ± 2.6, and 50% of athletes were found to be poor sleepers (PSQI > 5). Daytime sleepiness was prevalent throughout the population (average global score of 8.5) and clinically significant (ESS score of ≥10) in 28% of athletes. OSA may be an important clinical consideration within athletic populations, as a considerable number of athletes (38%) defined themselves as snorers and 8% reported having a witnessed apnoeic episode. The relationship between self-rated sleep quality and actual PSQI score was strong (Pearson correlation of 0.4 ± 0.1, 90% confidence limits). These findings suggest that this cohort of team sport athletes suffer a preponderance of poor sleep quality, with associated high levels of daytime sleepiness. Athletes should receive education about how to improve sleep wake schedules, extend total sleep time and improve sleep quality.

The Impact of Interactive Computer Simulations on the Nature and Quality of Postgraduate Science Teachers' Explanations in Physics

ERIC Educational Resources Information Center

Zacharia, Zacharias C.

2005-01-01

This study investigated how individuals' construction of explanations--a way of ascertaining how well an individual understands a concept--develops from an interactive simulation. Specifically, the purpose was to investigate the effect of interactive computer simulations or science textbook assignments on the nature and quality of postgraduate…

Paediatric x-ray radiation dose reduction and image quality analysis.

PubMed

Martin, L; Ruddlesden, R; Makepeace, C; Robinson, L; Mistry, T; Starritt, H

2013-09-01

Collaboration of multiple staff groups has resulted in significant reduction in the risk of radiation-induced cancer from radiographic x-ray exposure during childhood. In this study at an acute NHS hospital trust, a preliminary audit identified initial exposure factors. These were compared with European and UK guidance, leading to the introduction of new factors that were in compliance with European guidance on x-ray tube potentials. Image quality was assessed using standard anatomical criteria scoring, and visual grading characteristics analysis assessed the impact on image quality of changes in exposure factors. This analysis determined the acceptability of gradual radiation dose reduction below the European and UK guidance levels. Chest and pelvis exposures were optimised, achieving dose reduction for each age group, with 7%-55% decrease in critical organ dose. Clinicians confirmed diagnostic image quality throughout the iterative process. Analysis of images acquired with preliminary and final exposure factors indicated an average visual grading analysis result of 0.5, demonstrating equivalent image quality. The optimisation process and final radiation doses are reported for Carestream computed radiography to aid other hospitals in minimising radiation risks to children.

[Factors related to the quality of life of the elderly in programs for senior citizens].

PubMed

Dawalibi, Nathaly Wehbe; Goulart, Rita Maria Monteiro; Prearo, Leandro Campi

2014-08-01

Population aging is a social phenomenon that demands the attention of health professionals. This article seeks to analyze the influence of possible intervening factors on the quality of life of the elderly. It was a cross-sectional, quantitative, descriptive and exploratory study, in which 182 elderly of both genders participated. They were aged ≥ 60 years and were enrolled in programs for senior citizens from three universities located in the cities of Sao Paulo, Sao Caetano do Sul and Mogi das Cruzes. To evaluate the subjective perception of quality of life, the World Health Organization Quality of Life questionnaire (WHOQOL-Bref) was used. Multiple linear regression analysis was performed on the dependent and independent variables. A significance level of 5% was adopted. The results showed that the absence of disease positively influenced the quality of life on the four domains evaluated. In the environmental domain, full tertiary education, old age, the absence of disease and being a resident in Sao Caetano do Sul positively influenced the quality of life of the elderly. The factors associated with better quality of life were: full tertiary education, old age, the absence of disease and being a resident in Sao Caetano do Sul, in that order of importance.

Adaptive Statistical Iterative Reconstruction-V: Impact on Image Quality in Ultralow-Dose Coronary Computed Tomography Angiography.

PubMed

Benz, Dominik C; Gräni, Christoph; Mikulicic, Fran; Vontobel, Jan; Fuchs, Tobias A; Possner, Mathias; Clerc, Olivier F; Stehli, Julia; Gaemperli, Oliver; Pazhenkottil, Aju P; Buechel, Ronny R; Kaufmann, Philipp A

The clinical utility of a latest generation iterative reconstruction algorithm (adaptive statistical iterative reconstruction [ASiR-V]) has yet to be elucidated for coronary computed tomography angiography (CCTA). This study evaluates the impact of ASiR-V on signal, noise and image quality in CCTA. Sixty-five patients underwent clinically indicated CCTA on a 256-slice CT scanner using an ultralow-dose protocol. Data sets from each patient were reconstructed at 6 different levels of ASiR-V. Signal intensity was measured by placing a region of interest in the aortic root, LMA, and RCA. Similarly, noise was measured in the aortic root. Image quality was visually assessed by 2 readers. Median radiation dose was 0.49 mSv. Image noise decreased with increasing levels of ASiR-V resulting in a significant increase in signal-to-noise ratio in the RCA and LMA (P < 0.001). Correspondingly, image quality significantly increased with higher levels of ASiR-V (P < 0.001). ASiR-V yields substantial noise reduction and improved image quality enabling introduction of ultralow-dose CCTA.

On the tunability of quality-factor for optical Tamm plasmon modes

NASA Astrophysics Data System (ADS)

Kumar, Samir; Das, Ritwick

2017-09-01

We present a comprehensive investigation to ascertain the impact of gold and silver films on modifying the quality-factor (Q-factor) of optical Tamm-plasmon (OTP) resonance in a metal-distributed Bragg reflector (M-DBR) geometry. Here, OTP mode is excited using direct incidence of white-light-source at normal incidence as well as oblique incidence on M-DBR geometry. The lifetime of OTP in gold and silver deposited films on DBR mirror was determined from OTP resonance linewidth. The lifetime and the Q-factor of OTP modes are found to depend on DBR bilayers, metal film thickness as well as on different plasmon active metals. This finding would facilitate tuning the Q-factor and consequently, the lifetime of OTP modes for various applications in all-optical switches and modulators. In addition, we discuss the spectral characteristics of OTP modes excited using normal and oblique incident of source.

Contrast-enhanced Spectral Mammography: Modality-Specific Artifacts and Other Factors Which May Interfere with Image Quality.

PubMed

Bhimani, Chandni; Li, Luna; Liao, Lydia; Roth, Robyn G; Tinney, Elizabeth; Germaine, Pauline

2017-01-01

Contrast-enhanced spectral mammography (CESM) uses full field digital mammography with the added benefit of intravenous contrast administration to significantly reduce false-positive and false-negative results and improve specificity while maintaining high sensitivity. For CESM to fulfill its purpose, one should be aware of possible artifacts and other factors which may interfere with image quality, and attention should be taken to minimize these factors. This pictorial demonstration will depict types of artifacts detected and other factors that interfere with image acquisition in our practice since CESM implementation. Many of the artifacts and other factors we have encountered while using CESM have simple solutions to resolve them. The illustrated artifacts and other factors interfering with image quality will serve as a useful reference to anyone using CESM. Copyright © 2017 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

Demographic factors and playing variables in online computer gaming.

PubMed

Griffiths, Mark D; Davies, Mark N O; Chappell, Darren

2004-08-01

Despite the growing popularity of online game playing, there has been no primary survey of its players. Therefore, an online questionnaire survey was used to examine basic demographic factors of online computer game players who played the popular online game Everquest (i.e., gender, age, marital status, nationality, education level, occupation). The survey also examined playing frequency (i.e., amount of time spent playing the game a week), playing history (i.e., how long they had been playing the game, who they played the game with, whether they had ever gender swapped their game character), the favorite and least favorite aspects of playing the game, and what they sacrifice (if anything) to play the game. Results showed that 81% of online game players were male, and that the mean age of players was 27.9 years of age. For many players, the social aspects of the game were the most important factor in playing. A small minority of players appear to play excessively (over 80 h a week), and results suggest that a small minority sacrifice important activities in order to play (e.g., sleep, time with family and/or partner, work, or schooling).

Medication-related risk factors associated with health-related quality of life among community-dwelling elderly in China.

PubMed

Zhang, Sha; Meng, Long; Qiu, Feng; Yang, Jia-Dan; Sun, Shusen

2018-01-01

Previous studies have demonstrated that medication adherence has an impact on health-related quality of life (HRQoL). However, other medication-related factors that may influence HRQoL have not been extensively studied, especially factors based on the Medication-Risk Questionnaire (MRQ), and such studies are mostly done in Western countries. Our objective was to explore risk factors associated with HRQoL among community-dwelling elderly with chronic diseases in mainland China, especially the medication-related risk factors regarding MRQ. The study was conducted in a community health service center through surveys to eligible patients. The main outcomes of HRQoL were assessed by the EuroQol-5D (EQ-5D) scale and EQ-visual analog scale (EQ-VAS). Medication-related risk factors according to MRQ associated with HRQoL were identified using a multiple linear regression. A total of 311 patients were analyzed, averaging 71.19±5.33 years, and 68.8% were female. The mean EQ-5D index was 0.72±0.09, and the mean EQ-VAS score was 71.37±11.97. The most prevalent problem was pain/discomfort, and 90.0% believed that they could take care of themselves without any problems. Sex, age, educational level, frailty, function status, and certain medication-related factors regarding MRQ were found to be significant factors impacting the HRQoL. A multivariate analysis showed that MRQ factors of polypharmacy, multimorbidity, feeling difficultly with taking medicines as prescribed, and taking medicines with narrow therapeutic index had negative impacts on the quality of life. Patient's internal characteristics and medication-related risk factors according to MRQ were associated with quality of life. The results of the MRQ is an indicator of quality of life that can identify patients who need interventions.

Community factors to promote parents' quality of child-nurturing life.

PubMed

Aoyama, Megumi; Wei, Chang Nian; Chang-nian, Wei; Harada, Koichi; Ueda, Kimiyo; Takano, Miyuki; Ueda, Atsushi

2013-01-01

The purpose of this study was to clarify the role of community factors in parents' quality of child-nurturing life (QCNL). We developed a questionnaire to evaluate the degree of QCNL and determine the structural factors related to QCNL as community factors related to parents' QCNL derived from focus group interviews and the Delphi technique. The questionnaire also included the battery of the self-rating depression scale and Tsumori-Inage Infant's Developmental Test. Using the questionnaire, we then conducted a quantitative survey of parents whose children attended nursery schools in Kumamoto Prefecture. Factor analysis, calculation of the mean score and/or ratio to each item, Pearson's correlation coefficient, t test, multiple regression analysis, and covariance structure analysis were performed. The questionnaire we developed consisted of seven items with 75 elements, involving ten elements as community factors. Subjects included 699 parents (mean age 33.6 ± 5.4 years) and 965 children (age range 0-6 years). Factor analysis revealed that community factors consisted of five factors, such as "lifestyle rooted in the ground," "balance of housekeeping and work," "community network," "amenity," and "regeneration of life". These factors may be dominant in a rural area. Finally, we developed a structural model with "community factors," QCNL, QOL, and "child growth" by covariance structural analysis. The analysis revealed that community factors had a positive relation to parents' QCNL (r = 0.81, p < 0.001) and that parental SDS score had a negative relation to parents' QCNL (r = -0.59, p < 0.001). The analysis did show that community factors were positively related to the sound growth of children. The covariance structure analysis revealed that community factors were associated with parents' QCNL, SDS, and "child growth."

Not So Fast: Inflation in Impact Factors Contributes to Apparent Improvements in Journal Quality

ERIC Educational Resources Information Center

Neff, Bryan D.; Olden, Julian D.

2010-01-01

The Institute for Scientific Information (ISI) impact factor has become an important standard for assessing journal quality. Here we propose that impact factors may be subject to inflation analogous to changes in monetary prices in economics. The possibility of inflation came to light as a result of the observation that papers published today tend…

Guinea pig for meat production: A systematic review of factors affecting the production, carcass and meat quality.

PubMed

Sánchez-Macías, Davinia; Barba-Maggi, Lida; Morales-delaNuez, Antonio; Palmay-Paredes, Julio

2018-09-01

In developing countries, interest in guinea pig farming is growing exponentially because it provides a regular source of high quality animal protein for domestic consumption. Guinea pigs (Cavia porcellus) are prolific animals, grow and are capable of reproduction on a flexible diet, and are adaptable to a wide range of climates. This article mainly reviews findings on guinea pig meat production, including factors affecting raising guinea pigs, carcass and meat quality. We also present some studies that describe biological and pathologic effects on carcass component composition. During the last decades no standard procedure has been established for guinea pig carcass evaluation, which makes very difficult any comparison of results with other studies around the world. Herein we highlight a variety of factors that significantly affect carcass and meat quality. Some of these factors are production systems, environmental and genetic factors, management systems, the diet and health status, age, sex and reproductive management. Copyright © 2018 Elsevier Ltd. All rights reserved.

[Relationship between social-psycological factors and quality of life in old women with coronary heart disease].

PubMed

Wu, Lin-Na; Yang, Guo-Yun; Ge, Ning

2013-03-01

To investigate the influence of depression, social supports and quality of sleep and quality of life on old women who were 60 years or older and postmenopause with coronary heart disease. 125 old women with coronary heart disease completed questionnaires of Seattle Angina Questionnaire (SAQ), Social Support Scale (SSRS) and Self-rating Depression Scale (SDS). Logistic regression analysis and Spearman correlation analysis were performed to evaluate the relationship between social-psycological factors and quality of life. 120 of questionnaires wereeffective (representing 96% of all collected questionnaires). Regression analysis showed that marital status (OR = 2.450), education (OR = 0.520), income (OR = 19.541) and course of disease (OR = 0.309) were associated with QOL in CHD (P < 0.05). Spearman analysis demonstrated that there were negative correlations between SQA score and PSQI and depression scores (r = -0.771, P < 0.01; r = -0.703, P < 0.05); and positive correlation between SQA score and Social support score (r = 0.565, P < 0.05). Social-psychological factors might influence the quality of life in old women with coronary heart disease, it is important that physicians pay attention to these factors when they treat old women with coronary heart disease.

His and Hers: Economic Factors and Relationship Quality in Germany

PubMed Central

Hardie, Jessica Halliday; Geist, Claudia; Lucas, Amy

2014-01-01

Research has linked economic factors to relationship quality in the United States, primarily using cross-sectional data. In the current study, 2 waves of the Panel Analysis of Intimate Relationships and Family Dynamics data (n = 2,937) were used to test the gendered association between economic factors and relationship satisfaction among young German couples. In contrast to U.S.-based studies, the findings showed striking gender differences in the association between economic factors and relationship satisfaction for Germans. In cross-sectional models, women’s relationship satisfaction was positively associated with receiving government economic support, and men’s satisfaction was positively associated with poverty status and negatively associated with being a breadwinner. Longitudinal models revealed that changes in poverty status are associated with women’s satisfaction, but men’s satisfaction remains tied to their role as family provider. These unexpected results suggest that men’s satisfaction is positively associated with a more equal division of labor market activity between partners. PMID:25045175

Applying analytic hierarchy process to assess healthcare-oriented cloud computing service systems.

PubMed

Liao, Wen-Hwa; Qiu, Wan-Li

2016-01-01

Numerous differences exist between the healthcare industry and other industries. Difficulties in the business operation of the healthcare industry have continually increased because of the volatility and importance of health care, changes to and requirements of health insurance policies, and the statuses of healthcare providers, which are typically considered not-for-profit organizations. Moreover, because of the financial risks associated with constant changes in healthcare payment methods and constantly evolving information technology, healthcare organizations must continually adjust their business operation objectives; therefore, cloud computing presents both a challenge and an opportunity. As a response to aging populations and the prevalence of the Internet in fast-paced contemporary societies, cloud computing can be used to facilitate the task of balancing the quality and costs of health care. To evaluate cloud computing service systems for use in health care, providing decision makers with a comprehensive assessment method for prioritizing decision-making factors is highly beneficial. Hence, this study applied the analytic hierarchy process, compared items related to cloud computing and health care, executed a questionnaire survey, and then classified the critical factors influencing healthcare cloud computing service systems on the basis of statistical analyses of the questionnaire results. The results indicate that the primary factor affecting the design or implementation of optimal cloud computing healthcare service systems is cost effectiveness, with the secondary factors being practical considerations such as software design and system architecture.

Environmental Factors Affecting Computer Assisted Language Learning Success: A Complex Dynamic Systems Conceptual Model

ERIC Educational Resources Information Center

Marek, Michael W.; Wu, Wen-Chi Vivian

2014-01-01

This conceptual, interdisciplinary inquiry explores Complex Dynamic Systems as the concept relates to the internal and external environmental factors affecting computer assisted language learning (CALL). Based on the results obtained by de Rosnay ["World Futures: The Journal of General Evolution", 67(4/5), 304-315 (2011)], who observed…

Impact of Altering Various Image Parameters on Human Epidermal Growth Factor Receptor 2 Image Analysis Data Quality.

PubMed

Pantanowitz, Liron; Liu, Chi; Huang, Yue; Guo, Huazhang; Rohde, Gustavo K

2017-01-01

The quality of data obtained from image analysis can be directly affected by several preanalytical (e.g., staining, image acquisition), analytical (e.g., algorithm, region of interest [ROI]), and postanalytical (e.g., computer processing) variables. Whole-slide scanners generate digital images that may vary depending on the type of scanner and device settings. Our goal was to evaluate the impact of altering brightness, contrast, compression, and blurring on image analysis data quality. Slides from 55 patients with invasive breast carcinoma were digitized to include a spectrum of human epidermal growth factor receptor 2 (HER2) scores analyzed with Visiopharm (30 cases with score 0, 10 with 1+, 5 with 2+, and 10 with 3+). For all images, an ROI was selected and four parameters (brightness, contrast, JPEG2000 compression, out-of-focus blurring) then serially adjusted. HER2 scores were obtained for each altered image. HER2 scores decreased with increased illumination, higher compression ratios, and increased blurring. HER2 scores increased with greater contrast. Cases with HER2 score 0 were least affected by image adjustments. This experiment shows that variations in image brightness, contrast, compression, and blurring can have major influences on image analysis results. Such changes can result in under- or over-scoring with image algorithms. Standardization of image analysis is recommended to minimize the undesirable impact such variations may have on data output.

CRN5EXP: Expert system for statistical quality control

NASA Technical Reports Server (NTRS)

Hentea, Mariana

1991-01-01