[Assessing user satisfaction, an objective for quality of care].

PubMed

Séné-Bourgeois, Martine; Mathieu-Chakroun, Isabelle; Margat, Aurore

The assessment of user satisfaction constitutes a key indicator of the quality of care. It can be envisaged either as part of an internal strategy which favours the improvement of practices, an external strategy whose focus is more commercial and/or an exploratory strategy to develop care models. User satisfaction is expressed in particular through complaint letters and discharge questionnaires. These regulated schemes enable quality to be approached on an individual and collective level. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Validation of the DeLone and McLean Information Systems Success Model.

PubMed

Ojo, Adebowale I

2017-01-01

This study is an adaptation of the widely used DeLone and McLean information system success model in the context of hospital information systems in a developing country. A survey research design was adopted in the study. A structured questionnaire was used to collect data from 442 health information management personnel in five Nigerian teaching hospitals. A structural equation modeling technique was used to validate the model's constructs. It was revealed that system quality significantly influenced use (β = 0.53, p < 0.001) and user satisfaction (β = 0.17, p < 0.001). Information quality significantly influenced use (β = 0.24, p < 0.001) and user satisfaction (β = 0.17, p < 0.001). Also, service quality significantly influenced use (β = 0.22, p < 0.001) and user satisfaction (β = 0.51, p < 0.001). However, use did not significantly influence user satisfaction (β = 0.00, p > 0.05), but it significantly influenced perceived net benefits (β = 0.21, p < 0.001). Furthermore, user satisfaction did not significantly influence perceived net benefits (β = 0.00, p > 0.05). The study validates the DeLone and McLean information system success model in the context of a hospital information system in a developing country. Importantly, system quality and use were found to be important measures of hospital information system success. It is, therefore, imperative that hospital information systems are designed in such ways that are easy to use, flexible, and functional to serve their purpose.

Validation of the DeLone and McLean Information Systems Success Model

PubMed Central

2017-01-01

Objectives This study is an adaptation of the widely used DeLone and McLean information system success model in the context of hospital information systems in a developing country. Methods A survey research design was adopted in the study. A structured questionnaire was used to collect data from 442 health information management personnel in five Nigerian teaching hospitals. A structural equation modeling technique was used to validate the model's constructs. Results It was revealed that system quality significantly influenced use (β = 0.53, p < 0.001) and user satisfaction (β = 0.17, p < 0.001). Information quality significantly influenced use (β = 0.24, p < 0.001) and user satisfaction (β = 0.17, p < 0.001). Also, service quality significantly influenced use (β = 0.22, p < 0.001) and user satisfaction (β = 0.51, p < 0.001). However, use did not significantly influence user satisfaction (β = 0.00, p > 0.05), but it significantly influenced perceived net benefits (β = 0.21, p < 0.001). Furthermore, user satisfaction did not significantly influence perceived net benefits (β = 0.00, p > 0.05). Conclusions The study validates the DeLone and McLean information system success model in the context of a hospital information system in a developing country. Importantly, system quality and use were found to be important measures of hospital information system success. It is, therefore, imperative that hospital information systems are designed in such ways that are easy to use, flexible, and functional to serve their purpose. PMID:28261532

Take the Reins on Model Quality with ModelCHECK and Gatekeeper

NASA Technical Reports Server (NTRS)

Jones, Corey

2012-01-01

Model quality and consistency has been an issue for us due to the diverse experience level and imaginative modeling techniques of our users. Fortunately, setting up ModelCHECK and Gatekeeper to enforce our best practices has helped greatly, but it wasn't easy. There were many challenges associated with setting up ModelCHECK and Gatekeeper including: limited documentation, restrictions within ModelCHECK, and resistance from end users. However, we consider ours a success story. In this presentation we will describe how we overcame these obstacles and present some of the details of how we configured them to work for us.

The good, the bad and the dubious: VHELIBS, a validation helper for ligands and binding sites

PubMed Central

2013-01-01

Background Many Protein Data Bank (PDB) users assume that the deposited structural models are of high quality but forget that these models are derived from the interpretation of experimental data. The accuracy of atom coordinates is not homogeneous between models or throughout the same model. To avoid basing a research project on a flawed model, we present a tool for assessing the quality of ligands and binding sites in crystallographic models from the PDB. Results The Validation HElper for LIgands and Binding Sites (VHELIBS) is software that aims to ease the validation of binding site and ligand coordinates for non-crystallographers (i.e., users with little or no crystallography knowledge). Using a convenient graphical user interface, it allows one to check how ligand and binding site coordinates fit to the electron density map. VHELIBS can use models from either the PDB or the PDB_REDO databank of re-refined and re-built crystallographic models. The user can specify threshold values for a series of properties related to the fit of coordinates to electron density (Real Space R, Real Space Correlation Coefficient and average occupancy are used by default). VHELIBS will automatically classify residues and ligands as Good, Dubious or Bad based on the specified limits. The user is also able to visually check the quality of the fit of residues and ligands to the electron density map and reclassify them if needed. Conclusions VHELIBS allows inexperienced users to examine the binding site and the ligand coordinates in relation to the experimental data. This is an important step to evaluate models for their fitness for drug discovery purposes such as structure-based pharmacophore development and protein-ligand docking experiments. PMID:23895374

Factors affecting success of an integrated community-based telehealth system.

PubMed

Hsieh, Hui-Lung; Tsai, Chung-Hung; Chih, Wen-Hai; Lin, Huei-Hsieh

2015-01-01

The rise of chronic and degenerative diseases in developed countries has become one critical epidemiologic issue. Telehealth can provide one viable way to enhance health care, public health, and health education delivery and support. The study aims to empirically examine and evaluate the success factors of community-based telehealth system adoption. The valid 336 respondents are the residents of a rural community in Taiwan. The structural equation modeling (SEM) was used to assess the proposed model applied to telehealth. The findings showed the research model had good explanatory power and fitness. Also, the findings indicated that system quality exerted the strongest overall effect on intention to use. Furthermore, service quality exerted the strongest overall effect on user satisfaction. The findings also illustrated that the joint effects of three intrinsic qualities (system quality, information quality, and service quality) on use were mediated by user satisfaction and intention to use. The study implies that community-based telehealth service providers should improve three intrinsic qualities to enhance user satisfaction and intention to use, which in turn can lead to increase the usage of the telehealth equipment. The integrated community-based telehealth system may become an innovative and suitable way to deliver better care to the residents of communities.

PRIMO: An Interactive Homology Modeling Pipeline.

PubMed

Hatherley, Rowan; Brown, David K; Glenister, Michael; Tastan Bishop, Özlem

2016-01-01

The development of automated servers to predict the three-dimensional structure of proteins has seen much progress over the years. These servers make calculations simpler, but largely exclude users from the process. In this study, we present the PRotein Interactive MOdeling (PRIMO) pipeline for homology modeling of protein monomers. The pipeline eases the multi-step modeling process, and reduces the workload required by the user, while still allowing engagement from the user during every step. Default parameters are given for each step, which can either be modified or supplemented with additional external input. PRIMO has been designed for users of varying levels of experience with homology modeling. The pipeline incorporates a user-friendly interface that makes it easy to alter parameters used during modeling. During each stage of the modeling process, the site provides suggestions for novice users to improve the quality of their models. PRIMO provides functionality that allows users to also model ligands and ions in complex with their protein targets. Herein, we assess the accuracy of the fully automated capabilities of the server, including a comparative analysis of the available alignment programs, as well as of the refinement levels used during modeling. The tests presented here demonstrate the reliability of the PRIMO server when producing a large number of protein models. While PRIMO does focus on user involvement in the homology modeling process, the results indicate that in the presence of suitable templates, good quality models can be produced even without user intervention. This gives an idea of the base level accuracy of PRIMO, which users can improve upon by adjusting parameters in their modeling runs. The accuracy of PRIMO's automated scripts is being continuously evaluated by the CAMEO (Continuous Automated Model EvaluatiOn) project. The PRIMO site is free for non-commercial use and can be accessed at https://primo.rubi.ru.ac.za/.

PRIMO: An Interactive Homology Modeling Pipeline

PubMed Central

Glenister, Michael

2016-01-01

The development of automated servers to predict the three-dimensional structure of proteins has seen much progress over the years. These servers make calculations simpler, but largely exclude users from the process. In this study, we present the PRotein Interactive MOdeling (PRIMO) pipeline for homology modeling of protein monomers. The pipeline eases the multi-step modeling process, and reduces the workload required by the user, while still allowing engagement from the user during every step. Default parameters are given for each step, which can either be modified or supplemented with additional external input. PRIMO has been designed for users of varying levels of experience with homology modeling. The pipeline incorporates a user-friendly interface that makes it easy to alter parameters used during modeling. During each stage of the modeling process, the site provides suggestions for novice users to improve the quality of their models. PRIMO provides functionality that allows users to also model ligands and ions in complex with their protein targets. Herein, we assess the accuracy of the fully automated capabilities of the server, including a comparative analysis of the available alignment programs, as well as of the refinement levels used during modeling. The tests presented here demonstrate the reliability of the PRIMO server when producing a large number of protein models. While PRIMO does focus on user involvement in the homology modeling process, the results indicate that in the presence of suitable templates, good quality models can be produced even without user intervention. This gives an idea of the base level accuracy of PRIMO, which users can improve upon by adjusting parameters in their modeling runs. The accuracy of PRIMO’s automated scripts is being continuously evaluated by the CAMEO (Continuous Automated Model EvaluatiOn) project. The PRIMO site is free for non-commercial use and can be accessed at https://primo.rubi.ru.ac.za/. PMID:27855192

Users' Continuance Intention of Virtual Learning Community Services: The Moderating Role of Usage Experience

ERIC Educational Resources Information Center

Zhang, Min; Liu, Yupei; Yan, Weiwei; Zhang, Yan

2017-01-01

Users' continuance intention plays a significant role in the process of information system (IS) service, especially virtual learning community (VLC) services. Following the IS success model and IS post-acceptance model, this study explores the determinants of users' intention to continue using VLCs' service from the perspective of quality,…

Comparison of computer models for estimating hydrology and water quality in an agricultural watershed

USDA-ARS?s Scientific Manuscript database

Various computer models, ranging from simple to complex, have been developed to simulate hydrology and water quality from field to watershed scales. However, many users are uncertain about which model to choose when estimating water quantity and quality conditions in a watershed. This study compared...

WASP TRANSPORT MODELING AND WASP ECOLOGICAL MODELING

EPA Science Inventory

A combination of lectures, demonstrations, and hands-on excercises will be used to introduce pollutant transport modeling with the U.S. EPA's general water quality model, WASP (Water Quality Analysis Simulation Program). WASP features include a user-friendly Windows-based interfa...

Water Quality Analysis Simulation Program (WASP)

EPA Pesticide Factsheets

The Water Quality Analysis Simulation Program (WASP) model helps users interpret and predict water quality responses to natural phenomena and manmade pollution for various pollution management decisions.

Measuring quality of adolescent preventive services of health plan enrollees and school-based health center users.

PubMed

Klein, Jonathan D; Handwerker, Lisa; Sesselberg, Tracy S; Sutter, Erika; Flanagan, Erinn; Gawronski, Beth

2007-08-01

To evaluate whether quality of care provided to adolescents enrolled in a community-based managed care plan was better for those who also received some care at school-based health centers (SBHCs). The Young Adult Health Care Survey (YAHCS) was administered to 374 adolescents (commercially insured, Medicaid-insured, and SBHC users) to assess risk behaviors, provision of preventive screening and counseling, and quality of care. SBHC users were most likely to report that their provider told them their discussions were confidential, and that they received screening/counseling on sexually transmitted diseases (STDs), HIV/AIDS, condom use, and birth control. Commercially insured adolescents were least likely to report discussion of sexual health issues. SBHC users had the highest mean YAHCS quality measure scores for screening/counseling on pregnancy/STDs, diet and exercise, and helpfulness of counseling provided; Medicaid-insured teens had the lowest scores on four of seven measures. Regression models controlled for demographics, use of screener, and site of care showed that use of a screener had a significant impact on six of seven quality measure models. Younger age predicted screening for risk behaviors; being female, African-American, and an SBHC user predicted screening on pregnancy/STDs. SBHCs may increase adolescents' access to confidential care, and SBHC providers may be more likely than those in other settings to screen and counsel patients about sexual health. Overall quality of preventive care reported by commercially insured adolescents may be better in some health content areas and worse in others compared with care reported by Medicaid-insured youth and SBHC users.

Development of the quality assessment model of EHR software in family medicine practices: research based on user satisfaction.

PubMed

Kralj, Damir; Kern, Josipa; Tonkovic, Stanko; Koncar, Miroslav

2015-09-09

Family medicine practices (FMPs) make the basis for the Croatian health care system. Use of electronic health record (EHR) software is mandatory and it plays an important role in running these practices, but important functional features still remain uneven and largely left to the will of the software developers. The objective of this study was to develop a novel and comprehensive model for functional evaluation of the EHR software in FMPs, based on current world standards, models and projects, as well as on actual user satisfaction and requirements. Based on previous theoretical and experimental research in this area, we made the initial framework model consisting of six basic categories as a base for online survey questionnaire. Family doctors assessed perceived software quality by using a five-point Likert-type scale. Using exploratory factor analysis and appropriate statistical methods over the collected data, the final optimal structure of the novel model was formed. Special attention was focused on the validity and quality of the novel model. The online survey collected a total of 384 cases. The obtained results indicate both the quality of the assessed software and the quality in use of the novel model. The intense ergonomic orientation of the novel measurement model was particularly emphasised. The resulting novel model is multiple validated, comprehensive and universal. It could be used to assess the user-perceived quality of almost all forms of the ambulatory EHR software and therefore useful to all stakeholders in this area of the health care informatisation.

Meeting in Turkey: WASP Transport Modeling and WASP Ecological Modeling

EPA Science Inventory

A combination of lectures, demonstrations, and hands-on excercises will be used to introduce pollutant transport modeling with the U.S. EPA's general water quality model, WASP (Water Quality Analysis Simulation Program). WASP features include a user-friendly Windows-based interfa...

Meeting in Korea: WASP Transport Modeling and WASP Ecological Modeling

EPA Science Inventory

A combination of lectures, demonstrations, and hands-on excercises will be used to introduce pollutant transport modeling with the U.S. EPA's general water quality model, WASP (Water Quality Analysis Simulation Program). WASP features include a user-friendly Windows-based interfa...

Spatial Allocator for air quality modeling

EPA Pesticide Factsheets

The Spatial Allocator is a set of tools that helps users manipulate and generate data files related to emissions and air quality modeling without requiring the use of a commercial Geographic Information System.

BASINS Tutorials and Training

EPA Pesticide Factsheets

A series of lectures and exercises on how to use BASINS for water quality modeling and watershed assessment. The lectures follow sequentially. Companion exercises are provided for users to practice different BASINS water quality modeling techniques.

AVERT User Manual

EPA Pesticide Factsheets

AVERT is a flexible modeling framework with a simple user interface designed specifically to meet the needs of state air quality planners and other interested stakeholders. Use this guide to get started.

How the national healthcare quality and disparities reports can catalyze quality improvement.

PubMed

McNeill, Dwight; Kelley, Ed

2005-03-01

The purpose of the National Reports on Healthcare Quality and Disparities is to enhance awareness of quality and health care disparities, track progress, understand variations, and catalyze improvements in health care. The objective of this paper is to propose a model that will facilitate a user's progression from knowledge to action and to show how the reports, its data warehouse, associated products, and Agency for Healthcare Research and Quality resources are integrated and focused on a comprehensive campaign to improve health care quality. The design of the paper is to present a conceptual model and to show how implementation strategies for the reports fit the model. The authors propose a quality improvement supply chain model to help elucidate the links of the process, corresponding developmental stages that potential users need to master and progress through, and "just-in-time" supply chain inputs at each of the corresponding stages, and populate the model with examples. The traditional ways of disseminating knowledge derived from science through reports and conferences are inadequate to the humbling need for vast improvements in the US health care system. Our model suggests the need for a wide variety of information, packaged in a diverse ways, and delivered just in time and on demand. It encourages the alignment of decision makers and researchers, along with information intermediaries and innovation brokers, to make the information production cycle more efficient and effective. Future iterations of the reports will improve relevance, meaning, and distribution of information to facilitate its uptake by potential users.

Stochastic Packet Loss Model to Evaluate QoE Impairments

NASA Astrophysics Data System (ADS)

Hohlfeld, Oliver

With provisioning of broadband access for mass market—even in wireless and mobile networks—multimedia content, especially real-time streaming of high-quality audio and video, is extensively viewed and exchanged over the Internet. Quality of Experience (QoE) aspects, describing the service quality perceived by the user, is a vital factor in ensuring customer satisfaction in today's communication networks. Frameworks for accessing quality degradations in streamed video currently are investigated as a complex multi-layered research topic, involving network traffic load, codec functions and measures of user perception of video quality.

Modeling antecedents of electronic medical record system implementation success in low-resource setting hospitals.

PubMed

Tilahun, Binyam; Fritz, Fleur

2015-08-01

With the increasing implementation of Electronic Medical Record Systems (EMR) in developing countries, there is a growing need to identify antecedents of EMR success to measure and predict the level of adoption before costly implementation. However, less evidence is available about EMR success in the context of low-resource setting implementations. Therefore, this study aims to fill this gap by examining the constructs and relationships of the widely used DeLone and MacLean (D&M) information system success model to determine whether it can be applied to measure EMR success in those settings. A quantitative cross sectional study design using self-administered questionnaires was used to collect data from 384 health professionals working in five governmental hospitals in Ethiopia. The hospitals use a comprehensive EMR system since three years. Descriptive and structural equation modeling methods were applied to describe and validate the extent of relationship of constructs and mediating effects. The findings of the structural equation modeling shows that system quality has significant influence on EMR use (β = 0.32, P < 0.05) and user satisfaction (β = 0.53, P < 0.01); information quality has significant influence on EMR use (β = 0.44, P < 0.05) and user satisfaction (β = 0.48, P < 0.01) and service quality has strong significant influence on EMR use (β = 0.36, P < 0.05) and user satisfaction (β = 0.56, P < 0.01). User satisfaction has significant influence on EMR use (β = 0.41, P < 0.05) but the effect of EMR use on user satisfaction was not significant. Both EMR use and user satisfaction have significant influence on perceived net-benefit (β = 0.31, P < 0.01; β = 0.60, P < 0.01), respectively. Additionally, computer literacy was found to be a mediating factor in the relationship between service quality and EMR use (P < 0.05) as well as user satisfaction (P < 0.01). Among all the constructs, user satisfaction showed the strongest effect on perceived net-benefit of health professionals. EMR implementers and managers in developing countries are in urgent need of implementation models to design proper implementation strategies. In this study, the constructs and relationships depicted in the updated D&M model were found to be applicable to assess the success of EMR in low resource settings. Additionally, computer literacy was found to be a mediating factor in EMR use and user satisfaction of health professionals. Hence, EMR implementers and managers in those settings should give priority in improving service quality of the hospitals like technical support and infrastructure; providing continuous basic computer trainings to health professionals; and give attention to the system and information quality of the systems they want to implement.

An integrated view of data quality in Earth observation

PubMed Central

Yang, X.; Blower, J. D.; Bastin, L.; Lush, V.; Zabala, A.; Masó, J.; Cornford, D.; Díaz, P.; Lumsden, J.

2013-01-01

Data quality is a difficult notion to define precisely, and different communities have different views and understandings of the subject. This causes confusion, a lack of harmonization of data across communities and omission of vital quality information. For some existing data infrastructures, data quality standards cannot address the problem adequately and cannot fulfil all user needs or cover all concepts of data quality. In this study, we discuss some philosophical issues on data quality. We identify actual user needs on data quality, review existing standards and specifications on data quality, and propose an integrated model for data quality in the field of Earth observation (EO). We also propose a practical mechanism for applying the integrated quality information model to a large number of datasets through metadata inheritance. While our data quality management approach is in the domain of EO, we believe that the ideas and methodologies for data quality management can be applied to wider domains and disciplines to facilitate quality-enabled scientific research. PMID:23230156

An integrated view of data quality in Earth observation.

PubMed

Yang, X; Blower, J D; Bastin, L; Lush, V; Zabala, A; Masó, J; Cornford, D; Díaz, P; Lumsden, J

2013-01-28

Data quality is a difficult notion to define precisely, and different communities have different views and understandings of the subject. This causes confusion, a lack of harmonization of data across communities and omission of vital quality information. For some existing data infrastructures, data quality standards cannot address the problem adequately and cannot fulfil all user needs or cover all concepts of data quality. In this study, we discuss some philosophical issues on data quality. We identify actual user needs on data quality, review existing standards and specifications on data quality, and propose an integrated model for data quality in the field of Earth observation (EO). We also propose a practical mechanism for applying the integrated quality information model to a large number of datasets through metadata inheritance. While our data quality management approach is in the domain of EO, we believe that the ideas and methodologies for data quality management can be applied to wider domains and disciplines to facilitate quality-enabled scientific research.

Water Quality Analysis Simulation

EPA Pesticide Factsheets

The Water Quality analysis simulation Program, an enhancement of the original WASP. This model helps users interpret and predict water quality responses to natural phenomena and man-made pollution for variious pollution management decisions.

OCD: The offshore and coastal dispersion model. Volume 1. User's guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

DiCristofaro, D.C.; Hanna, S.R.

1989-11-01

The Offshore and Coastal Dispersion (OCD) Model has been developed to simulate the effect of offshore emissions from point, area, or line sources on the air quality of coastal regions. The OCD model was adapted from the EPA guideline model MPTER (EPA, 1980). Modifications were made to incorporate overwater plume transport and dispersion as well as changes that occur as the plume crosses the shoreline. This is a revised OCD model, the fourth version to date. The volume is the User's Guide which includes a Model overview, technical description, user's instructions, and notes on model evaluation and results.

Quality of longer term mental health facilities in Europe: validation of the quality indicator for rehabilitative care against service users' views.

PubMed

Killaspy, Helen; White, Sarah; Wright, Christine; Taylor, Tatiana L; Turton, Penny; Kallert, Thomas; Schuster, Mirjam; Cervilla, Jorge A; Brangier, Paulette; Raboch, Jiri; Kalisova, Lucie; Onchev, Georgi; Alexiev, Spiridon; Mezzina, Roberto; Ridente, Pina; Wiersma, Durk; Visser, Ellen; Kiejna, Andrzej; Piotrowski, Patryk; Ploumpidis, Dimitris; Gonidakis, Fragiskos; Caldas-de-Almeida, José Miguel; Cardoso, Graça; King, Michael

2012-01-01

The Quality Indicator for Rehabilitative Care (QuIRC) is a staff rated, international toolkit that assesses care in longer term hospital and community based mental health facilities. The QuIRC was developed from review of the international literature, an international Delphi exercise with over 400 service users, practitioners, carers and advocates from ten European countries at different stages of deinstitutionalisation, and review of the care standards in these countries. It can be completed in under an hour by the facility manager and has robust content validity, acceptability and inter-rater reliability. In this study, we investigated the internal validity of the QuIRC. Our aim was to identify the QuIRC domains of care that independently predicted better service user experiences of care. At least 20 units providing longer term care for adults with severe mental illness were recruited in each of ten European countries. Service users completed standardised measures of their experiences of care, quality of life, autonomy and the unit's therapeutic milieu. Unit managers completed the QuIRC. Multilevel modelling allowed analysis of associations between service user ratings as dependent variables with unit QuIRC domain ratings as independent variables. 1750/2495 (70%) users and the managers of 213 units from across ten European countries participated. QuIRC ratings were positively associated with service users' autonomy and experiences of care. Associations between QuIRC ratings and service users' ratings of their quality of life and the unit's therapeutic milieu were explained by service user characteristics (age, diagnosis and functioning). A hypothetical 10% increase in QuIRC rating resulted in a clinically meaningful improvement in autonomy. Ratings of the quality of longer term mental health facilities made by service managers were positively associated with service users' autonomy and experiences of care. Interventions that improve quality of care in these settings may promote service users' autonomy.

Root zone water quality model (RZWQM2): Model use, calibration and validation

USGS Publications Warehouse

Ma, Liwang; Ahuja, Lajpat; Nolan, B.T.; Malone, Robert; Trout, Thomas; Qi, Z.

2012-01-01

The Root Zone Water Quality Model (RZWQM2) has been used widely for simulating agricultural management effects on crop production and soil and water quality. Although it is a one-dimensional model, it has many desirable features for the modeling community. This article outlines the principles of calibrating the model component by component with one or more datasets and validating the model with independent datasets. Users should consult the RZWQM2 user manual distributed along with the model and a more detailed protocol on how to calibrate RZWQM2 provided in a book chapter. Two case studies (or examples) are included in this article. One is from an irrigated maize study in Colorado to illustrate the use of field and laboratory measured soil hydraulic properties on simulated soil water and crop production. It also demonstrates the interaction between soil and plant parameters in simulated plant responses to water stresses. The other is from a maize-soybean rotation study in Iowa to show a manual calibration of the model for crop yield, soil water, and N leaching in tile-drained soils. Although the commonly used trial-and-error calibration method works well for experienced users, as shown in the second example, an automated calibration procedure is more objective, as shown in the first example. Furthermore, the incorporation of the Parameter Estimation Software (PEST) into RZWQM2 made the calibration of the model more efficient than a grid (ordered) search of model parameters. In addition, PEST provides sensitivity and uncertainty analyses that should help users in selecting the right parameters to calibrate.

BASINS Framework and Features

EPA Pesticide Factsheets

BASINS enables users to efficiently access nationwide environmental databases and local user-specified datasets, apply assessment and planning tools, and run a variety of proven nonpoint loading and water quality models within a single GIS format.

A Neural Network Approach to Intention Modeling for User-Adapted Conversational Agents

PubMed Central

Griol, David

2016-01-01

Spoken dialogue systems have been proposed to enable a more natural and intuitive interaction with the environment and human-computer interfaces. In this contribution, we present a framework based on neural networks that allows modeling of the user's intention during the dialogue and uses this prediction to dynamically adapt the dialogue model of the system taking into consideration the user's needs and preferences. We have evaluated our proposal to develop a user-adapted spoken dialogue system that facilitates tourist information and services and provide a detailed discussion of the positive influence of our proposal in the success of the interaction, the information and services provided, and the quality perceived by the users. PMID:26819592

Objective Video Quality Assessment Based on Machine Learning for Underwater Scientific Applications

PubMed Central

Moreno-Roldán, José-Miguel; Luque-Nieto, Miguel-Ángel; Poncela, Javier; Otero, Pablo

2017-01-01

Video services are meant to be a fundamental tool in the development of oceanic research. The current technology for underwater networks (UWNs) imposes strong constraints in the transmission capacity since only a severely limited bitrate is available. However, previous studies have shown that the quality of experience (QoE) is enough for ocean scientists to consider the service useful, although the perceived quality can change significantly for small ranges of variation of video parameters. In this context, objective video quality assessment (VQA) methods become essential in network planning and real time quality adaptation fields. This paper presents two specialized models for objective VQA, designed to match the special requirements of UWNs. The models are built upon machine learning techniques and trained with actual user data gathered from subjective tests. Our performance analysis shows how both of them can successfully estimate quality as a mean opinion score (MOS) value and, for the second model, even compute a distribution function for user scores. PMID:28333123

How Clean is your Local Air? Here's an app for that

NASA Astrophysics Data System (ADS)

Maskey, M.; Yang, E.; Christopher, S. A.; Keiser, K.; Nair, U. S.; Graves, S. J.

2011-12-01

Air quality is a vital element of our environment. Accurate and localized air quality information is critical for characterizing environmental impacts at the local and regional levels. Advances in location-aware handheld devices and air quality modeling have enabled a group of UAHuntsville scientists to develop a mobile app, LocalAQI, that informs users of current conditions and forecasts of up to twenty-four hours, of air quality indices. The air quality index is based on Community Multiscale Air Quality Modeling System (CMAQ). UAHuntsville scientists have used satellite remote sensing products as inputs to CMAQ, resulting in forecast guidance for particulate matter air quality. The CMAQ output is processed to compute a standardized air quality index. Currently, the air quality index is available for the eastern half of the United States. LocalAQI consists of two main views: air quality index view and map view. The air quality index view displays current air quality for the zip code of a location of interest. Air quality index value is translated into a color-coded advisory system. In addition, users are able to cycle through available hourly forecasts for a location. This location-aware app defaults to the current air quality of user's location. The map view displays color-coded air quality information for the eastern US with an ability to animate through the available forecasts. The app is developed using a cross-platform native application development tool, appcelerator; hence LocalAQI is available for iOS and Android-based phones and pads.

40 CFR Appendix B to Subpart E of... - Federal Guidelines-User Charges for Operation and Maintenance of Publicly Owned Treatment Works

Code of Federal Regulations, 2011 CFR

2011-07-01

.... S = Concentration of SS from a user above a base level. Pc = O&M cost for treatment of a unit of any...(B)=Sc(S)=Pc(P)]Vu (3) Model No. 3. This model is commonly called the “quantity/quality formula”: Cu = Vc Vu=Bc Bu=Sc Su=Pc Pu (h) Other considerations. (1) Quantity discounts to large volume users will...

INDOOR AIR QUALITY MODEL VERSION 1.0 DOCUMENTATION

EPA Science Inventory

The report presents a multiroom model for estimating the impact of various sources on indoor air quality (IAQ). The model is written for use on IBM-PC and compatible microcomputers. It is easy to use with a menu-driven user interface. Data are entered using a fill-in-a-form inter...

HAWQS Beta Flyer

EPA Pesticide Factsheets

HAWQS is a web-based interactive water quantity and quality modeling system that provides users with interactive web interfaces and maps; pre-loaded input data; outputs that include tables, charts, graphs and raw output data; and a user guide.

HAWQS beta flyer

EPA Pesticide Factsheets

HAWQS is a web-based interactive water quantity and quality modeling system that provides users with interactive web interfaces and maps; pre-loaded input data; outputs that include tables, charts, graphs and raw output data; and a user guide.

GMove: Group-Level Mobility Modeling Using Geo-Tagged Social Media.

PubMed

Zhang, Chao; Zhang, Keyang; Yuan, Quan; Zhang, Luming; Hanratty, Tim; Han, Jiawei

2016-08-01

Understanding human mobility is of great importance to various applications, such as urban planning, traffic scheduling, and location prediction. While there has been fruitful research on modeling human mobility using tracking data ( e.g. , GPS traces), the recent growth of geo-tagged social media (GeoSM) brings new opportunities to this task because of its sheer size and multi-dimensional nature. Nevertheless, how to obtain quality mobility models from the highly sparse and complex GeoSM data remains a challenge that cannot be readily addressed by existing techniques. We propose GMove, a group-level mobility modeling method using GeoSM data. Our insight is that the GeoSM data usually contains multiple user groups, where the users within the same group share significant movement regularity. Meanwhile, user grouping and mobility modeling are two intertwined tasks: (1) better user grouping offers better within-group data consistency and thus leads to more reliable mobility models; and (2) better mobility models serve as useful guidance that helps infer the group a user belongs to. GMove thus alternates between user grouping and mobility modeling, and generates an ensemble of Hidden Markov Models (HMMs) to characterize group-level movement regularity. Furthermore, to reduce text sparsity of GeoSM data, GMove also features a text augmenter. The augmenter computes keyword correlations by examining their spatiotemporal distributions. With such correlations as auxiliary knowledge, it performs sampling-based augmentation to alleviate text sparsity and produce high-quality HMMs. Our extensive experiments on two real-life data sets demonstrate that GMove can effectively generate meaningful group-level mobility models. Moreover, with context-aware location prediction as an example application, we find that GMove significantly outperforms baseline mobility models in terms of prediction accuracy.

GMove: Group-Level Mobility Modeling Using Geo-Tagged Social Media

PubMed Central

Zhang, Chao; Zhang, Keyang; Yuan, Quan; Zhang, Luming; Hanratty, Tim; Han, Jiawei

2017-01-01

Understanding human mobility is of great importance to various applications, such as urban planning, traffic scheduling, and location prediction. While there has been fruitful research on modeling human mobility using tracking data (e.g., GPS traces), the recent growth of geo-tagged social media (GeoSM) brings new opportunities to this task because of its sheer size and multi-dimensional nature. Nevertheless, how to obtain quality mobility models from the highly sparse and complex GeoSM data remains a challenge that cannot be readily addressed by existing techniques. We propose GMove, a group-level mobility modeling method using GeoSM data. Our insight is that the GeoSM data usually contains multiple user groups, where the users within the same group share significant movement regularity. Meanwhile, user grouping and mobility modeling are two intertwined tasks: (1) better user grouping offers better within-group data consistency and thus leads to more reliable mobility models; and (2) better mobility models serve as useful guidance that helps infer the group a user belongs to. GMove thus alternates between user grouping and mobility modeling, and generates an ensemble of Hidden Markov Models (HMMs) to characterize group-level movement regularity. Furthermore, to reduce text sparsity of GeoSM data, GMove also features a text augmenter. The augmenter computes keyword correlations by examining their spatiotemporal distributions. With such correlations as auxiliary knowledge, it performs sampling-based augmentation to alleviate text sparsity and produce high-quality HMMs. Our extensive experiments on two real-life data sets demonstrate that GMove can effectively generate meaningful group-level mobility models. Moreover, with context-aware location prediction as an example application, we find that GMove significantly outperforms baseline mobility models in terms of prediction accuracy. PMID:28163978

Evaluating the success of an emergency response medical information system.

PubMed

Petter, Stacie; Fruhling, Ann

2011-07-01

STATPack™ is an information system used to aid in the diagnosis of pathogens in hospitals and state public health laboratories. STATPack™ is used as a communication and telemedicine diagnosis tool during emergencies. This paper explores the success of this emergency response medical information system (ERMIS) using a well-known framework of information systems success developed by DeLone and McLean. Using an online survey, the entire population of STATPack™ users evaluated the success of the information system by considering system quality, information quality, system use, intention to use, user satisfaction, individual impact, and organizational impact. The results indicate that the overall quality of this ERMIS (i.e., system quality, information quality, and service quality) has a positive impact on both user satisfaction and intention to use the system. However, given the nature of ERMIS, overall quality does not necessarily predict use of the system. Moreover, the user's satisfaction with the information system positively affected the intention to use the system. User satisfaction, intention to use, and system use had a positive influence on the system's impact on the individual. Finally, the organizational impacts of the system were positively influenced by use of the system and the system's individual impact on the user. The results of the study demonstrate how to evaluate the success of an ERMIS as well as introduce potential changes in how one applies the DeLone and McLean success model in an emergency response medical information system context. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

User-generated quality standards for youth mental health in primary care: a participatory research design using mixed methods

PubMed Central

Graham, Tanya; Rose, Diana; Murray, Joanna; Ashworth, Mark; Tylee, André

2014-01-01

Objectives To develop user-generated quality standards for young people with mental health problems in primary care using a participatory research model. Methods 50 young people aged 16–25 from community settings and primary care participated in focus groups and interviews about their views and experiences of seeking help for mental health problems in primary care, cofacilitated by young service users and repeated to ensure respondent validation. A second group of young people also aged 16–25 who had sought help for any mental health problem from primary care or secondary care within the last 5 years were trained as focus groups cofacilitators (n=12) developed the quality standards from the qualitative data and participated in four nominal groups (n=28). Results 46 quality standards were developed and ranked by young service users. Agreement was defined as 100% of scores within a two-point region. Group consensus existed for 16 quality standards representing the following aspects of primary care: better advertising and information (three); improved competence through mental health training and skill mix within the practice (two); alternatives to medication (three); improved referral protocol (three); and specific questions and reassurances (five). Alternatives to medication and specific questions and reassurances are aspects of quality which have not been previously reported. Conclusions We have demonstrated the feasibility of using participatory research methods in order to develop user-generated quality standards. The development of patient-generated quality standards may offer a more formal method of incorporating the views of service users into quality improvement initiatives. This method can be adapted for generating quality standards applicable to other patient groups. PMID:24920648

Using Modified-ISS Model to Evaluate Medication Administration Safety During Bar Code Medication Administration Implementation in Taiwan Regional Teaching Hospital.

PubMed

Ma, Pei-Luen; Jheng, Yan-Wun; Jheng, Bi-Wei; Hou, I-Ching

2017-01-01

Bar code medication administration (BCMA) could reduce medical errors and promote patient safety. This research uses modified information systems success model (M-ISS model) to evaluate nurses' acceptance to BCMA. The result showed moderate correlation between medication administration safety (MAS) to system quality, information quality, service quality, user satisfaction, and limited satisfaction.

Evaluation of a Digital Library by Means of Quality Function Deployment (QFD) and the Kano Model

ERIC Educational Resources Information Center

Garibay, Cecilia; Gutierrez, Humberto; Figueroa, Arturo

2010-01-01

This paper proposes utilizing a combination of the Quality Function Deployment (QFD)-Kano model as a useful tool to evaluate service quality. The digital library of the University of Guadalajara (Mexico) is presented as a case study. Data to feed the QFD-Kano model was gathered by an online questionnaire that was made available to users on the…

Regional characterization of freshwater Use in LCA: modeling direct impacts on human health.

PubMed

Boulay, Anne-Marie; Bulle, Cécile; Bayart, Jean-Baptiste; Deschênes, Louise; Margni, Manuele

2011-10-15

Life cycle assessment (LCA) is a methodology that quantifies potential environmental impacts for comparative purposes in a decision-making context. While potential environmental impacts from pollutant emissions into water are characterized in LCA, impacts from water unavailability are not yet fully quantified. Water use can make the resource unavailable to other users by displacement or quality degradation. A reduction in water availability to human users can potentially affect human health. If financial resources are available, there can be adaptations that may, in turn, shift the environmental burdens to other life cycle stages and impact categories. This paper proposes a model to evaluate these potential impacts in an LCA context. It considers the water that is withdrawn and released, its quality and scarcity in order to evaluate the loss of functionality associated with water uses. Regionalized results are presented for impacts on human health for two modeling approaches regarding affected users, including or not domestic uses, and expressed in disability-adjusted life years (DALY). A consumption and quality based scarcity indicator is also proposed as a midpoint. An illustrative example is presented for the production of corrugated board with different effluents, demonstrating the importance of considering quality, process effluents and the difference between the modeling approaches.

GEO Label Web Services for Dynamic and Effective Communication of Geospatial Metadata Quality

NASA Astrophysics Data System (ADS)

Lush, Victoria; Nüst, Daniel; Bastin, Lucy; Masó, Joan; Lumsden, Jo

2014-05-01

We present demonstrations of the GEO label Web services and their integration into a prototype extension of the GEOSS portal (http://scgeoviqua.sapienzaconsulting.com/web/guest/geo_home), the GMU portal (http://gis.csiss.gmu.edu/GADMFS/) and a GeoNetwork catalog application (http://uncertdata.aston.ac.uk:8080/geonetwork/srv/eng/main.home). The GEO label is designed to communicate, and facilitate interrogation of, geospatial quality information with a view to supporting efficient and effective dataset selection on the basis of quality, trustworthiness and fitness for use. The GEO label which we propose was developed and evaluated according to a user-centred design (UCD) approach in order to maximise the likelihood of user acceptance once deployed. The resulting label is dynamically generated from producer metadata in ISO or FDGC format, and incorporates user feedback on dataset usage, ratings and discovered issues, in order to supply a highly informative summary of metadata completeness and quality. The label was easily incorporated into a community portal as part of the GEO Architecture Implementation Programme (AIP-6) and has been successfully integrated into a prototype extension of the GEOSS portal, as well as the popular metadata catalog and editor, GeoNetwork. The design of the GEO label was based on 4 user studies conducted to: (1) elicit initial user requirements; (2) investigate initial user views on the concept of a GEO label and its potential role; (3) evaluate prototype label visualizations; and (4) evaluate and validate physical GEO label prototypes. The results of these studies indicated that users and producers support the concept of a label with drill-down interrogation facility, combining eight geospatial data informational aspects, namely: producer profile, producer comments, lineage information, standards compliance, quality information, user feedback, expert reviews, and citations information. These are delivered as eight facets of a wheel-like label, which are coloured according to metadata availability and are clickable to allow a user to engage with the original metadata and explore specific aspects in more detail. To support this graphical representation and allow for wider deployment architectures we have implemented two Web services, a PHP and a Java implementation, that generate GEO label representations by combining producer metadata (from standard catalogues or other published locations) with structured user feedback. Both services accept encoded URLs of publicly available metadata documents or metadata XML files as HTTP POST and GET requests and apply XPath and XSLT mappings to transform producer and feedback XML documents into clickable SVG GEO label representations. The label and services are underpinned by two XML-based quality models. The first is a producer model that extends ISO 19115 and 19157 to allow fuller citation of reference data, presentation of pixel- and dataset- level statistical quality information, and encoding of 'traceability' information on the lineage of an actual quality assessment. The second is a user quality model (realised as a feedback server and client) which allows reporting and query of ratings, usage reports, citations, comments and other domain knowledge. Both services are Open Source and are available on GitHub at https://github.com/lushv/geolabel-service and https://github.com/52North/GEO-label-java. The functionality of these services can be tested using our GEO label generation demos, available online at http://www.geolabel.net/demo.html and http://geoviqua.dev.52north.org/glbservice/index.jsf.

A time-varying subjective quality model for mobile streaming videos with stalling events

NASA Astrophysics Data System (ADS)

Ghadiyaram, Deepti; Pan, Janice; Bovik, Alan C.

2015-09-01

Over-the-top mobile video streaming is invariably influenced by volatile network conditions which cause playback interruptions (stalling events), thereby impairing users' quality of experience (QoE). Developing models that can accurately predict users' QoE could enable the more efficient design of quality-control protocols for video streaming networks that reduce network operational costs while still delivering high-quality video content to the customers. Existing objective models that predict QoE are based on global video features, such as the number of stall events and their lengths, and are trained and validated on a small pool of ad hoc video datasets, most of which are not publicly available. The model we propose in this work goes beyond previous models as it also accounts for the fundamental effect that a viewer's recent level of satisfaction or dissatisfaction has on their overall viewing experience. In other words, the proposed model accounts for and adapts to the recency, or hysteresis effect caused by a stall event in addition to accounting for the lengths, frequency of occurrence, and the positions of stall events - factors that interact in a complex way to affect a user's QoE. On the recently introduced LIVE-Avvasi Mobile Video Database, which consists of 180 distorted videos of varied content that are afflicted solely with over 25 unique realistic stalling events, we trained and validated our model to accurately predict the QoE, attaining standout QoE prediction performance.

Understanding the mediating effects of relationship quality on technology acceptance: an empirical study of e-appointment system.

PubMed

Chen, Shih-Chih; Liu, Shih-Chi; Li, Shing-Han; Yen, David C

2013-12-01

This study extends the Technology Acceptance Model (TAM) by incorporating relationship quality as a mediator to construct a comprehensive framework for understanding the influence on continuance intention in the hospital e-appointment system. A survey of 334 Taiwanese citizens who were contacted via phone or the Internet and Structural Equation Modeling (SEM) is used for path analysis and hypothesis tests. The study shows that perceived ease of use (PEOU) and perceived usefulness (PU) have significant influence on continuance intention through the mediation of relationship quality, consisting of satisfaction and trust. The direct impact of relationship quality on continuance intention is also significant. The analytical results reveal that the relationship between the hospital, patients and e-appointment users can be improved via enhancing the continued usage of e-appointment. This paper also proposes a general model to synthesize the essence of PEOU, PU, and relationship quality for explaining users' continuous intention of e-appointment.

A user-oriented and computerized model for estimating vehicle ride quality

NASA Technical Reports Server (NTRS)

Leatherwood, J. D.; Barker, L. M.

1984-01-01

A simplified empirical model and computer program for estimating passenger ride comfort within air and surface transportation systems are described. The model is based on subjective ratings from more than 3000 persons who were exposed to controlled combinations of noise and vibration in the passenger ride quality apparatus. This model has the capability of transforming individual elements of a vehicle's noise and vibration environment into subjective discomfort units and then combining the subjective units to produce a single discomfort index typifying passenger acceptance of the environment. The computational procedures required to obtain discomfort estimates are discussed, and a user oriented ride comfort computer program is described. Examples illustrating application of the simplified model to helicopter and automobile ride environments are presented.

Computer-program documentation of an interactive-accounting model to simulate streamflow, water quality, and water-supply operations in a river basin

USGS Publications Warehouse

Burns, A.W.

1988-01-01

This report describes an interactive-accounting model used to simulate streamflow, chemical-constituent concentrations and loads, and water-supply operations in a river basin. The model uses regression equations to compute flow from incremental (internode) drainage areas. Conservative chemical constituents (typically dissolved solids) also are computed from regression equations. Both flow and water quality loads are accumulated downstream. Optionally, the model simulates the water use and the simplified groundwater systems of a basin. Water users include agricultural, municipal, industrial, and in-stream users , and reservoir operators. Water users list their potential water sources, including direct diversions, groundwater pumpage, interbasin imports, or reservoir releases, in the order in which they will be used. Direct diversions conform to basinwide water law priorities. The model is interactive, and although the input data exist in files, the user can modify them interactively. A major feature of the model is its color-graphic-output options. This report includes a description of the model, organizational charts of subroutines, and examples of the graphics. Detailed format instructions for the input data, example files of input data, definitions of program variables, and listing of the FORTRAN source code are Attachments to the report. (USGS)

Developing inclusive partnerships: user-defined outcomes, networking and knowledge--a case study.

PubMed

Beresford, Peter; Branfield, Fran

2006-09-01

Two major developments have been associated with the reorientation of United Kingdom health and social care policy and provision in recent years, placing a new emphasis on: quality and 'outcome' measures; and service user (and public and patient) involvement. These issues have become central to health and social care, representing expressions of the shift in political and ideological interest in public policy. However, these two strands of development have tended to be treated as discrete discourses and have developed separately in policy. Nevertheless, it can hardly be assumed that what policy makers, service planners, providers and purchasers would value and prioritise as good quality would necessarily coincide with what service users would want. Developing effective partnership working needs to go beyond considerations of organisations and professional groupings, and fully involve service users as one of the key stakeholders. This paper describes the findings of three projects undertaken by Shaping Our Lives. These studies confirmed that service-user concepts of outcomes and quality may differ significantly from those currently employed; moreover, service users are able to offer a complex and sophisticated model of what outcome measures might look like if they were centrally involved in their definition and application. Nevertheless, service users currently have little impact in defining and influencing quality outcomes. The projects also highlight the importance of networking and knowledge sharing for service users and user organisations in their ability to influence policy definitions of quality, and a number of the barriers and obstacles which undermine this process. The paper concludes with two proposals which, considered together, offer the basis for taking forward effective and inclusive partnerships and developing measures for quality consistent with the rights and preferences of service users themselves. They are an essential complement to broader efforts and strategies to develop effective partnerships in health and social care.

Application of grey system theory in telecare.

PubMed

Huang, Jui-Chen

2011-05-01

As a superiority to conventional statistical models, grey models require only a limited amount of data to estimate the behaviour of unknown systems. Grey system theory can be used in the effective factor assessment, and used in large samples where data are not available or uncertain whether the data was representative. Therefore, the purpose of this study was to adopt grey system theory to discuss older adult users' opinions on the telecare and its effect on their quality of life. This study surveyed the older adult users of Taiwan as subjects. User perception of the telecare services was collected via face-to-face interview. The grey system theory was used to examine the model. The results showed that the overall living quality has the greatest effect on the perceived effects of the telecare on their quality of life, followed by the acquisition of information, accessibility of medical care services, and safety. This finding may serve as a reference to future studies and it also shows that the grey system theory is a feasible analysis method. Copyright © 2011 Elsevier Ltd. All rights reserved.

Research on the Establishment and Evaluation of End - to - End Service Quality Index System

NASA Astrophysics Data System (ADS)

Wei, Chen; Jing, Tao; Ji, Yutong

2018-01-01

From the perspective of power data networks, put forward the index system model to measure the quality of service, covering user experience, business performance, network capacity support, etc., and gives the establishment and use of each layer index in the model.

Pricing the Services in Dynamic Environment: Agent Pricing Model

NASA Astrophysics Data System (ADS)

Žagar, Drago; Rupčić, Slavko; Rimac-Drlje, Snježana

New Internet applications and services as well as new user demands open many new issues concerning dynamic management of quality of service and price for received service, respectively. The main goals of Internet service providers are to maximize profit and maintain a negotiated quality of service. From the users' perspective the main goal is to maximize ratio of received QoS and costs of service. However, achieving these objectives could become very complex if we know that Internet service users might during the session become highly dynamic and proactive. This connotes changes in user profile or network provider/s profile caused by high level of user mobility or variable level of user demands. This paper proposes a new agent based pricing architecture for serving the highly dynamic customers in context of dynamic user/network environment. The proposed architecture comprises main aspects and basic parameters that will enable objective and transparent assessment of the costs for the service those Internet users receive while dynamically change QoS demands and cost profile.

Social Collaborative Filtering by Trust.

PubMed

Yang, Bo; Lei, Yu; Liu, Jiming; Li, Wenjie

2017-08-01

Recommender systems are used to accurately and actively provide users with potentially interesting information or services. Collaborative filtering is a widely adopted approach to recommendation, but sparse data and cold-start users are often barriers to providing high quality recommendations. To address such issues, we propose a novel method that works to improve the performance of collaborative filtering recommendations by integrating sparse rating data given by users and sparse social trust network among these same users. This is a model-based method that adopts matrix factorization technique that maps users into low-dimensional latent feature spaces in terms of their trust relationship, and aims to more accurately reflect the users reciprocal influence on the formation of their own opinions and to learn better preferential patterns of users for high-quality recommendations. We use four large-scale datasets to show that the proposed method performs much better, especially for cold start users, than state-of-the-art recommendation algorithms for social collaborative filtering based on trust.

Water Energy Simulation Toolset

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen, Thuy; Jeffers, Robert

The Water-Energy Simulation Toolset (WEST) is an interactive simulation model that helps visualize impacts of different stakeholders on water quantity and quality of a watershed. The case study is applied for the Snake River Basin with the fictional name Cutthroat River Basin. There are four groups of stakeholders of interest: hydropower, agriculture, flood control, and environmental protection. Currently, the quality component depicts nitrogen-nitrate contaminant. Users can easily interact with the model by changing certain inputs (climate change, fertilizer inputs, etc.) to observe the change over the entire system. Users can also change certain parameters to test their management policy.

IS Success Model in E-Learning Context Based on Students' Perceptions

ERIC Educational Resources Information Center

Freeze, Ronald D.; Alshare, Khaled A.; Lane, Peggy L.; Wen, H. Joseph

2010-01-01

This study utilized the Information Systems Success (ISS) model in examining e-learning systems success. The study was built on the premise that system quality (SQ) and information quality (IQ) influence system use and user satisfaction, which in turn impact system success. A structural equation model (SEM), using LISREL, was used to test the…

EVALUATION OF THE REAL-TIME AIR-QUALITY MODEL USING THE RAPS (REGIONAL AIR POLLUTION STUDY) DATA BASE. VOLUME 3. PROGRAM USER'S GUIDE

EPA Science Inventory

The theory and programming of statistical tests for evaluating the Real-Time Air-Quality Model (RAM) using the Regional Air Pollution Study (RAPS) data base are fully documented in four volumes. Moreover, the tests are generally applicable to other model evaluation problems. Volu...

Performance evaluation of public hospital information systems by the information system success model.

PubMed

Cho, Kyoung Won; Bae, Sung-Kwon; Ryu, Ji-Hye; Kim, Kyeong Na; An, Chang-Ho; Chae, Young Moon

2015-01-01

This study was to evaluate the performance of the newly developed information system (IS) implemented on July 1, 2014 at three public hospitals in Korea. User satisfaction scores of twelve key performance indicators of six IS success factors based on the DeLone and McLean IS Success Model were utilized to evaluate IS performance before and after the newly developed system was introduced. All scores increased after system introduction except for the completeness of medical records and impact on the clinical environment. The relationships among six IS factors were also analyzed to identify the important factors influencing three IS success factors (Intention to Use, User Satisfaction, and Net Benefits). All relationships were significant except for the relationships among Service Quality, Intention to Use, and Net Benefits. The results suggest that hospitals should not only focus on systems and information quality; rather, they should also continuously improve service quality to improve user satisfaction and eventually reach full the potential of IS performance.

The association of sleep and late-night cell phone use among adolescents.

PubMed

Amra, Babak; Shahsavari, Ali; Shayan-Moghadam, Ramin; Mirheli, Omid; Moradi-Khaniabadi, Bita; Bazukar, Mehdi; Yadollahi-Farsani, Ashkan; Kelishadi, Roya

This study aims to assess the relationship of late-night cell phone use with sleep duration and quality in a sample of Iranian adolescents. The study population consisted of 2400 adolescents, aged 12-18 years, living in Isfahan, Iran. Age, body mass index, sleep duration, cell phone use after 9p.m., and physical activity were documented. For sleep assessment, the Pittsburgh Sleep Quality Index questionnaire was used. The participation rate was 90.4% (n=2257 adolescents). The mean (SD) age of participants was 15.44 (1.55) years; 1270 participants reported to use cell phone after 9p.m. Overall, 56.1% of girls and 38.9% of boys reported poor quality sleep, respectively. Wake-up time was 8:17 a.m. (2.33), among late-night cell phone users and 8:03a.m. (2.11) among non-users. Most (52%) late-night cell phone users had poor sleep quality. Sedentary participants had higher sleep latency than their peers. Adjusted binary and multinomial logistic regression models showed that late-night cell users were 1.39 times more likely to have a poor sleep quality than non-users (p-value<0.001). Late-night cell phone use by adolescents was associated with poorer sleep quality. Participants who were physically active had better sleep quality and quantity. As part of healthy lifestyle recommendations, avoidance of late-night cell phone use should be encouraged in adolescents. Copyright © 2017. Published by Elsevier Editora Ltda.

Programmers manual for a one-dimensional Lagrangian transport model

USGS Publications Warehouse

Schoellhamer, D.H.; Jobson, H.E.

1986-01-01

A one-dimensional Lagrangian transport model for simulating water-quality constituents such as temperature, dissolved oxygen , and suspended sediment in rivers is presented in this Programmers Manual. Lagrangian transport modeling techniques, the model 's subroutines, and the user-written decay-coefficient subroutine are discussed in detail. Appendices list the program codes. The Programmers Manual is intended for the model user who needs to modify code either to adapt the model to a particular need or to use reaction kinetics not provided with the model. (Author 's abstract)

Sensor-Based Optimization Model for Air Quality Improvement in Home IoT

PubMed Central

Kim, Jonghyuk

2018-01-01

We introduce current home Internet of Things (IoT) technology and present research on its various forms and applications in real life. In addition, we describe IoT marketing strategies as well as specific modeling techniques for improving air quality, a key home IoT service. To this end, we summarize the latest research on sensor-based home IoT, studies on indoor air quality, and technical studies on random data generation. In addition, we develop an air quality improvement model that can be readily applied to the market by acquiring initial analytical data and building infrastructures using spectrum/density analysis and the natural cubic spline method. Accordingly, we generate related data based on user behavioral values. We integrate the logic into the existing home IoT system to enable users to easily access the system through the Web or mobile applications. We expect that the present introduction of a practical marketing application method will contribute to enhancing the expansion of the home IoT market. PMID:29570684

Sensor-Based Optimization Model for Air Quality Improvement in Home IoT.

PubMed

Kim, Jonghyuk; Hwangbo, Hyunwoo

2018-03-23

We introduce current home Internet of Things (IoT) technology and present research on its various forms and applications in real life. In addition, we describe IoT marketing strategies as well as specific modeling techniques for improving air quality, a key home IoT service. To this end, we summarize the latest research on sensor-based home IoT, studies on indoor air quality, and technical studies on random data generation. In addition, we develop an air quality improvement model that can be readily applied to the market by acquiring initial analytical data and building infrastructures using spectrum/density analysis and the natural cubic spline method. Accordingly, we generate related data based on user behavioral values. We integrate the logic into the existing home IoT system to enable users to easily access the system through the Web or mobile applications. We expect that the present introduction of a practical marketing application method will contribute to enhancing the expansion of the home IoT market.

An Analysis of Contraceptive Discontinuation among Female, Reversible Method Users in Urban Honduras

PubMed Central

Barden-O’Fallon, Janine; Speizer, Ilene S.; Cálix, Javier; Rodriguez, Francisco

2013-01-01

A panel study examining the effects of individual characteristics, side effects experienced, and service quality on contraceptive discontinuation was undertaken in four urban areas of Honduras. Data were collected from October 2006 to December 2007. The baseline population included 800 women aged 15–44 who were new or continuing users of the injectable, IUD, or oral contraceptive pill. A total of 671 women (84%) were re-interviewed after one year. Life tables and Cox proportional hazards models are used to present discontinuation rates and factors associated with contraceptive discontinuation. Among new users, discontinuation of the baseline method at 12 months was high (45%); especially for users of the injectable (50%). In the hazards model, service quality had little effect on discontinuation, while individual characteristics and the experience of specific side effects showed significant effects. The results suggest that programs should emphasize continuous contraceptive coverage rather than continuous use of a particular method. PMID:21500697

Neuronvisio: A Graphical User Interface with 3D Capabilities for NEURON.

PubMed

Mattioni, Michele; Cohen, Uri; Le Novère, Nicolas

2012-01-01

The NEURON simulation environment is a commonly used tool to perform electrical simulation of neurons and neuronal networks. The NEURON User Interface, based on the now discontinued InterViews library, provides some limited facilities to explore models and to plot their simulation results. Other limitations include the inability to generate a three-dimensional visualization, no standard mean to save the results of simulations, or to store the model geometry within the results. Neuronvisio (http://neuronvisio.org) aims to address these deficiencies through a set of well designed python APIs and provides an improved UI, allowing users to explore and interact with the model. Neuronvisio also facilitates access to previously published models, allowing users to browse, download, and locally run NEURON models stored in ModelDB. Neuronvisio uses the matplotlib library to plot simulation results and uses the HDF standard format to store simulation results. Neuronvisio can be viewed as an extension of NEURON, facilitating typical user workflows such as model browsing, selection, download, compilation, and simulation. The 3D viewer simplifies the exploration of complex model structure, while matplotlib permits the plotting of high-quality graphs. The newly introduced ability of saving numerical results allows users to perform additional analysis on their previous simulations.

Data Quality Screening Service

NASA Technical Reports Server (NTRS)

Strub, Richard; Lynnes, Christopher; Hearty, Thomas; Won, Young-In; Fox, Peter; Zednik, Stephan

2013-01-01

A report describes the Data Quality Screening Service (DQSS), which is designed to help automate the filtering of remote sensing data on behalf of science users. Whereas this process often involves much research through quality documents followed by laborious coding, the DQSS is a Web Service that provides data users with data pre-filtered to their particular criteria, while at the same time guiding the user with filtering recommendations of the cognizant data experts. The DQSS design is based on a formal semantic Web ontology that describes data fields and the quality fields for applying quality control within a data product. The accompanying code base handles several remote sensing datasets and quality control schemes for data products stored in Hierarchical Data Format (HDF), a common format for NASA remote sensing data. Together, the ontology and code support a variety of quality control schemes through the implementation of the Boolean expression with simple, reusable conditional expressions as operands. Additional datasets are added to the DQSS simply by registering instances in the ontology if they follow a quality scheme that is already modeled in the ontology. New quality schemes are added by extending the ontology and adding code for each new scheme.

Human Systems Integration Design Environment (HSIDE)

DTIC Science & Technology

2012-04-09

quality of the resulting HSI products. 15. SUBJECT TERMS HSI , Manning Estimation and Validation , Risk Assessment, I POE, PLM, BPMN , Workflow...business process model in Business Process Modeling Notation ( BPMN ) or the actual workflow template associated with the specific functional area, again...as filtered by the user settings in the high level interface. Figure 3 shows the initial screen which allows the user to select either the BPMN or

Community Near-Port Modeling System (C-PORT): Briefing for ...

EPA Pesticide Factsheets

What C-PORT is: Screening level tool for assessing port activities and exploring the range of potential impacts that changes to port operations might have on local air quality; Analysis of decision alternatives through mapping of the likely pattern of potential pollutant dispersion and an estimated change in pollutant concentrations for user-designated scenarios; Designed primarily to evaluate the local air quality impacts of proposed port expansion or modernization, as well as to identify options for mitigating any impacts; Currently includes data from 21 US seaports and features a map-based interface similar to the widely used Google Earth; Still under development, C-PORT is designed as an easy-to-use computer modeling tool for users, such as state air quality managers and planners. This is part of our product outreach prior to model public release and to solicit for additional beta testers.

A model of user engagement in medical device development.

PubMed

Grocott, Patricia; Weir, Heather; Ram, Mala Bridgelal

2007-01-01

The purpose of this paper is to address three topical themes: user involvement in health services research; determining the value of new medical technologies in patient care pathways, furthering knowledge related to quality in health and social care; and knowledge exchange between manufacturers, health service supply chain networks and device users. The model is being validated in a case study in progress. The latter is a "proving ground" study for a translational research company. Medical devices play a pivotal role in the management of chronic diseases, across all care settings. Failure to engage users in device development inevitably affects the quality of clinical outcomes. A model of user engagement is presented, turning unmet needs for medical devices into viable commercial propositions. A case study investigating the perceptions of individuals with Epidermolysis Bullosa (EB), their lay and professional carers into unmet needs. EB is an inherited condition affecting the skin and mucosal linings that leads to blistering and wounds. Qualitative data are being collected to generate understanding of unmet needs and wound care products. These needs are being translated into new design concepts and prototypes. Prototypes will be evaluated in an n = 1 experimental design, generating quantitative outcomes data. There are generalisations from the case study, and the model outlined. New products for managing EB wounds can logically benefit other groups. The model is transferable to other clinical problems, which can benefit from research and technological advances that are integral to clinical needs and care.

Interprofessional learning in primary care: an exploration of the service user experience leads to a new model for co-learning.

PubMed

Worswick, Louise; Little, Christine; Ryan, Kath; Carr, Eloise

2015-01-01

Research about service user involvement in research and education focuses on the purpose, the methods, the barriers and the impact of their involvement. Few studies report on the experience of the service users who get involved. This paper reports an exploration of the experience of service users who participated in an interprofessional educational initiative in primary care - the Learning to Improve the Management of Back Pain in the Community (LIMBIC) project. Service users attended workshops with practice teams and assisted them in developing small scale quality improvement projects to improve their provision of care for people with back pain. To explore the experience of service users involved in the LIMBIC project. Using the philosophical and methodological approaches of pragmatism this study analysed data from the wider LIMBIC project and collected primary data through semi structured interviews with service users. Secondary data were reanalysed and integrated with primary data to address the research question. The study was undertaken in the primary health care setting. Patients participated as service users in workshops and quality improvement projects with members from their practice teams. Interviews with service users were transcribed and analysed thematically. Document and thematic analyses of secondary data from the LIMBIC project included focus group transcripts, patient stories, film, emails, meeting notes, a wiki and educational material such as presentations. Themes identified through the analyses illustrated the importance, to the service users, of the sense of community, of clear communication, and of influencing change through involvement. A model for co-learning with service users resulted from the analyses. The experience of service users can be optimised by planning, preparation and support so that their wealth of expertise can be recognised and utilised. A model for co-learning was developed and is presented in this paper. Copyright © 2014 Elsevier Ltd. All rights reserved.

Exploring nursing e-learning systems success based on information system success model.

PubMed

Chang, Hui-Chuan; Liu, Chung-Feng; Hwang, Hsin-Ginn

2011-12-01

E-learning is thought of as an innovative approach to enhance nurses' care service knowledge. Extensive research has provided rich information toward system development, courses design, and nurses' satisfaction with an e-learning system. However, a comprehensive view in understanding nursing e-learning system success is an important but less focused-on topic. The purpose of this research was to explore net benefits of nursing e-learning systems based on the updated DeLone and McLean's Information System Success Model. The study used a self-administered questionnaire to collected 208 valid nurses' responses from 21 of Taiwan's medium- and large-scale hospitals that have implemented nursing e-learning systems. The result confirms that the model is sufficient to explore the nurses' use of e-learning systems in terms of intention to use, user satisfaction, and net benefits. However, while the three exogenous quality factors (system quality, information quality, and service quality) were all found to be critical factors affecting user satisfaction, only information quality showed a direct effect on the intention to use. This study provides useful insights for evaluating nursing e-learning system qualities as well as an understanding of nurses' intentions and satisfaction related to performance benefits.

ANNIE - INTERACTIVE PROCESSING OF DATA BASES FOR HYDROLOGIC MODELS.

USGS Publications Warehouse

Lumb, Alan M.; Kittle, John L.

1985-01-01

ANNIE is a data storage and retrieval system that was developed to reduce the time and effort required to calibrate, verify, and apply watershed models that continuously simulate water quantity and quality. Watershed models have three categories of input: parameters to describe segments of a drainage area, linkage of the segments, and time-series data. Additional goals for ANNIE include the development of software that is easily implemented on minicomputers and some microcomputers and software that has no special requirements for interactive display terminals. Another goal is for the user interaction to be based on the experience of the user so that ANNIE is helpful to the inexperienced user and yet efficient and brief for the experienced user. Finally, the code should be designed so that additional hydrologic models can easily be added to ANNIE.

Model My Watershed: A high-performance cloud application for public engagement, watershed modeling and conservation decision support

NASA Astrophysics Data System (ADS)

Aufdenkampe, A. K.; Tarboton, D. G.; Horsburgh, J. S.; Mayorga, E.; McFarland, M.; Robbins, A.; Haag, S.; Shokoufandeh, A.; Evans, B. M.; Arscott, D. B.

2017-12-01

The Model My Watershed Web app (https://app.wikiwatershed.org/) and the BiG-CZ Data Portal (http://portal.bigcz.org/) and are web applications that share a common codebase and a common goal to deliver high-performance discovery, visualization and analysis of geospatial data in an intuitive user interface in web browser. Model My Watershed (MMW) was designed as a decision support system for watershed conservation implementation. BiG CZ Data Portal was designed to provide context and background data for research sites. Users begin by creating an Area of Interest, via an automated watershed delineation tool, a free draw tool, selection of a predefined area such as a county or USGS Hydrological Unit (HUC), or uploading a custom polygon. Both Web apps visualize and provide summary statistics of land use, soil groups, streams, climate and other geospatial information. MMW then allows users to run a watershed model to simulate different scenarios of human impacts on stormwater runoff and water-quality. BiG CZ Data Portal allows users to search for scientific and monitoring data within the Area of Interest, which also serves as a prototype for the upcoming Monitor My Watershed web app. Both systems integrate with CUAHSI cyberinfrastructure, including visualizing observational data from CUAHSI Water Data Center and storing user data via CUAHSI HydroShare. Both systems also integrate with the new EnviroDIY Water Quality Data Portal (http://data.envirodiy.org/), a system for crowd-sourcing environmental monitoring data using open-source sensor stations (http://envirodiy.org/mayfly/) and based on the Observations Data Model v2.

Objectifying user critique. A means of continuous quality assurance for physician discharge letter composition.

PubMed

Oschem, M; Mahler, V; Prokosch, H U

2011-01-01

The aim of this study is to objectify user critique rendering it usable for quality assurance. Based on formative and summative evaluation results we strive to promote software improvements; in our case, the physician discharge letter composition process at the Department of Dermatology, University Hospital Erlangen, Germany. We developed a novel six-step approach to objectify user critique: 1) acquisition of user critique using subjectivist methods, 2) creation of a workflow model, 3) definition of hypothesis and indicators, 4) measuring of indicators, 5) analyzing results, 6) optimization of the system regarding both subjectivist and objectivist evaluation results. In particular, we derived indicators and workflows directly from user critique/narratives. The identified indicators were mapped onto workflow activities, creating a link between user critique and the evaluated system. Users criticized a new discharge letter system as "too slow" and "too labor-intensive" in comparison with the previously used system. In a stepwise approach we collected subjective user critique, derived a comprehensive process model including deviations and deduced a set of five indicators for objectivist evaluation: processing time, system-related waiting time, number of mouse clicks, number of keyboard inputs, and throughput time. About 3500 measurements have been performed to compare the workflow-steps of both systems, regarding 20 discharge letters. Although the difference of the mean total processing time between both systems was statistically insignificant (2011.7 s vs. 1971.5 s; p = 0.457), we detected a significant difference in waiting times (101.8 s vs. 37.2 s; p <0.001) and number of user interactions (77 vs. 69; p <0.001) in favor of the old system, thus objectifying user critique. Our six-step approach enables objectification of user critique, resulting in objective values for continuous quality assurance. To our knowledge no previous study in medical informatics mapped user critique onto workflow steps. Subjectivist analysis prompted us to use the indicator system-related waiting time for the objectivist study, which was rarely done before. We consider combining subjectivist and objectivist methods as a key point of our approach. Future work will concentrate on automated measurement of indicators.

Capturing, Harmonizing and Delivering Data and Quality Provenance

NASA Technical Reports Server (NTRS)

Leptoukh, Gregory; Lynnes, Christopher

2011-01-01

Satellite remote sensing data have proven to be vital for various scientific and applications needs. However, the usability of these data depends not only on the data values but also on the ability of data users to assess and understand the quality of these data for various applications and for comparison or inter-usage of data from different sensors and models. In this paper, we describe some aspects of capturing, harmonizing and delivering this information to users in the framework of distributed web-based data tools.

QaaS (quality as a service) model for web services using big data technologies

NASA Astrophysics Data System (ADS)

Ahmad, Faisal; Sarkar, Anirban

2017-10-01

Quality of service (QoS) determines the service usability and utility and both of which influence the service selection process. The QoS varies from one service provider to other. Each web service has its own methodology for evaluating QoS. The lack of transparent QoS evaluation model makes the service selection challenging. Moreover, most QoS evaluation processes do not consider their historical data which not only helps in getting more accurate QoS but also helps for future prediction, recommendation and knowledge discovery. QoS driven service selection demands a model where QoS can be provided as a service to end users. This paper proposes a layered QaaS (quality as a service) model in the same line as PaaS and software as a service, where users can provide QoS attributes as inputs and the model returns services satisfying the user's QoS expectation. This paper covers all the key aspects in this context, like selection of data sources, its transformation, evaluation, classification and storage of QoS. The paper uses server log as the source for evaluating QoS values, common methodology for its evaluation and big data technologies for its transformation and analysis. This paper also establishes the fact that Spark outperforms the Pig with respect to evaluation of QoS from logs.

Ferroelectric Field Effect Transistor Model Using Partitioned Ferroelectric Layer and Partial Polarization

NASA Technical Reports Server (NTRS)

MacLeod, Todd C.; Ho, Fat D.

2004-01-01

A model of an n-channel ferroelectric field effect transistor has been developed based on both theoretical and empirical data. The model is based on an existing model that incorporates partitioning of the ferroelectric layer to calculate the polarization within the ferroelectric material. The model incorporates several new aspects that are useful to the user. It takes into account the effect of a non-saturating gate voltage only partially polarizing the ferroelectric material based on the existing remnant polarization. The model also incorporates the decay of the remnant polarization based on the time history of the FFET. A gate pulse of a specific voltage; will not put the ferroelectric material into a single amount of polarization for that voltage, but instead vary with previous state of the material and the time since the last change to the gate voltage. The model also utilizes data from FFETs made from different types of ferroelectric materials to allow the user just to input the material being used and not recreate the entire model. The model also allows the user to input the quality of the ferroelectric material being used. The ferroelectric material quality can go from a theoretical perfect material with little loss and no decay to a less than perfect material with remnant losses and decay. This model is designed to be used by people who need to predict the external characteristics of a FFET before the time and expense of design and fabrication. It also allows the parametric evaluation of quality of the ferroelectric film on the overall performance of the transistor.

Improving service user self-management: development and implementation of a strategy for the Richmond Response and Rehabilitation Team.

PubMed

Sanders, Julie; Fitzpatrick, Joanne M

2017-01-01

Community rapid response and rehabilitation teams are used to prevent avoidable hospital admissions for adults living with multiple long-term conditions and to support early hospital discharge by providing short-term intensive multidisciplinary support. Supporting self-management is an important service intervention if desired outcomes are to be achieved. A Care Quality Commission inspection of the Richmond Response and Rehabilitation Team in 2014 identified that self-management plans were not routinely developed with service users and reported this as requiring improvement. This quality improvement project aimed to develop and implement a self-management strategy for service users and for 90% of service users to have a personalised self-management plan within 3 months. The quality improvement intervention used the Plan-Do-Study-Act model comprising: (1) the development of a self-management plan, (2) staff education to support service users to self-manage using motivational interviewing techniques, (3) piloting the self-management plan with service users, (4) implementation of the self-management plan and (5) monthly audit and feedback. Evaluation involved an audit of the number and quality of self-management plans developed with service users and a survey of staff knowledge and confidence to support service users to self-manage. Following implementation of the intervention, the number of self-management plans developed in collaboration with service users increased from 0 to 187 over a 4-week period. Monthly audit data confirmed that this improvement has been sustained. Results indicated that staff knowledge and confidence improved after an education intervention. Quality improvement methods facilitated development and operationalisation of a self-management strategy by a community rapid response and rehabilitation team. The next phase of the project is to evaluate the impact of the self-management strategy on key service outcomes including self-efficacy, unplanned and emergency hospital admissions and early discharges.

A Web-Based Decision Support System for Assessing Regional Water-Quality Conditions and Management Actions

USGS Publications Warehouse

Booth, N.L.; Everman, E.J.; Kuo, I.-L.; Sprague, L.; Murphy, L.

2011-01-01

The U.S. Geological Survey National Water Quality Assessment Program has completed a number of water-quality prediction models for nitrogen and phosphorus for the conterminous United States as well as for regional areas of the nation. In addition to estimating water-quality conditions at unmonitored streams, the calibrated SPAtially Referenced Regressions On Watershed attributes (SPARROW) models can be used to produce estimates of yield, flow-weighted concentration, or load of constituents in water under various land-use condition, change, or resource management scenarios. A web-based decision support infrastructure has been developed to provide access to SPARROW simulation results on stream water-quality conditions and to offer sophisticated scenario testing capabilities for research and water-quality planning via a graphical user interface with familiar controls. The SPARROW decision support system (DSS) is delivered through a web browser over an Internet connection, making it widely accessible to the public in a format that allows users to easily display water-quality conditions and to describe, test, and share modeled scenarios of future conditions. SPARROW models currently supported by the DSS are based on the modified digital versions of the 1:500,000-scale River Reach File (RF1) and 1:100,000-scale National Hydrography Dataset (medium-resolution, NHDPlus) stream networks. ?? 2011 American Water Resources Association. This article is a U.S. Government work and is in the public domain in the USA.

ENHANCED STREAM WATER QUALITY MODELS QUAL2E AND QUAL2E-UNCAS: DOCUMENTATION AND USER MANUAL

EPA Science Inventory

The manual is a major revision of the original QUAL2E program documentation released in 1985. It includes a description of the recent modifications and improvements to the widely used water quality models QUAL-II and QUAL2E. The enhancements include an extensive capability for un...

A cluster randomised controlled trial of a staff-training intervention in residential units for people with long-term mental illness in Portugal: the PromQual trial.

PubMed

Cardoso, Graça; Papoila, Ana; Tomé, Gina; Killaspy, Helen; King, Michael; Caldas-de-Almeida, José Miguel

2017-11-01

This study aimed to assess the efficacy of a staff-training intervention to improve service users' engagement in activities and quality of care, by means of a cluster randomised controlled trial. All residential units with at least 12-h a day staff support (n = 23) were invited to participate. Quality of care was assessed with the Quality Indicator for Rehabilitative Care (QuIRC) filled online by the unit's manager. Half the units (n = 12) were randomly assigned to continue providing treatment as usual, and half (n = 11) received a staff-training intervention that focused on skills for engaging service users in activities, with trainers working alongside staff to embed this learning in the service. The primary outcome was service users' level of activity (measured with the Time Use Diary), reassessed at 4 and 8 months. Secondary outcomes were the quality of care provided (QuIRC), and service users' quality of life (Manchester Short Assessment of Quality of Life) reassessed at 8 months. Generalized linear mixed effect models were used to assess the difference in outcomes between units in the two trial arms. The trial was registered with Current Controlled Trials (Ref NCT02366117). Knowledge acquired by the staff during the initial workshops increased significantly (p ≤ 0.01). However, the intervention and comparison units did not differ significantly in primary and secondary outcomes at either follow-up. The intervention increased the level of knowledge of staff without leading to an improvement in service users' engagement in activities, quality of life, or quality of care in the units.

Developing a long-term condition's information service in collaboration with third sector organisations.

PubMed

McShane, Lesley; Greenwell, Kate; Corbett, Sally; Walker, Richard

2014-06-01

People with long-term conditions need to be signposted to high quality information and advice to understand and manage their condition. Information seeking tools combined with third sector information could help address their information needs. To describe the development and implementation of an information service for people living with long-term conditions at one NHS acute trust in the Northeast of England. An information service was trialled using bespoke information models for three long-term conditions in collaboration with third sector organisations. These guided people to relevant, timely and reliable information. Both clinician and service user questionnaires were used to evaluate satisfaction with the service. Appropriately designed information models can be used interchangeably across all services. Between 75% and 91% of users agreed that they were satisfied with various aspects of the service. Generally, users received relevant, understandable and high quality information at the right time. Nearly all health professionals (94-100%) felt the service was accessible, provided high quality information and did not significantly impact on their consultation time. The developed information service was well received by service users and health professionals. Specifically, the use of information prescriptions and menus facilitated access to information for people with long-term conditions. © 2014 The authors. Health Information and Libraries Journal © 2014 Health Libraries Group.

Tools for proactive collection and use of quality metadata in GEOSS

NASA Astrophysics Data System (ADS)

Bastin, L.; Thum, S.; Maso, J.; Yang, K. X.; Nüst, D.; Van den Broek, M.; Lush, V.; Papeschi, F.; Riverola, A.

2012-12-01

The GEOSS Common Infrastructure allows interactive evaluation and selection of Earth Observation datasets by the scientific community and decision makers, but the data quality information needed to assess fitness for use is often patchy and hard to visualise when comparing candidate datasets. In a number of studies over the past decade, users repeatedly identified the same types of gaps in quality metadata, specifying the need for enhancements such as peer and expert review, better traceability and provenance information, information on citations and usage of a dataset, warning about problems identified with a dataset and potential workarounds, and 'soft knowledge' from data producers (e.g. recommendations for use which are not easily encoded using the existing standards). Despite clear identification of these issues in a number of recommendations, the gaps persist in practice and are highlighted once more in our own, more recent, surveys. This continuing deficit may well be the result of a historic paucity of tools to support the easy documentation and continual review of dataset quality. However, more recent developments in tools and standards, as well as more general technological advances, present the opportunity for a community of scientific users to adopt a more proactive attitude by commenting on their uses of data, and for that feedback to be federated with more traditional and static forms of metadata, allowing a user to more accurately assess the suitability of a dataset for their own specific context and reliability thresholds. The EU FP7 GeoViQua project aims to develop this opportunity by adding data quality representations to the existing search and visualisation functionalities of the Geo Portal. Subsequently we will help to close the gap by providing tools to easily create quality information, and to permit user-friendly exploration of that information as the ultimate incentive for improved data quality documentation. Quality information is derived from producer metadata, from the data themselves, from validation of in-situ sensor data, from provenance information and from user feedback, and will be aggregated to produce clear and useful summaries of quality, including a GEO Label. GeoViQua's conceptual quality information models for users and producers are specifically described and illustrated in this presentation. These models (which have been encoded as XML schemas and can be accessed at http://schemas.geoviqua.org/) are designed to satisfy the identified user needs while remaining consistent with current standards such as ISO 19115 and advanced drafts such as ISO 19157. The resulting components being developed for the GEO Portal are designed to lower the entry barrier to users who wish to help to generate and explore rich and useful metadata. This metadata will include reviews, comments and ratings, reports of usage in specific domains and specification of datasets used for benchmarking, as well as rich quantitative information encoded in more traditional data quality elements such as thematic correctness and positional accuracy. The value of the enriched metadata will also be enhanced by graphical tools for visualizing spatially distributed uncertainties. We demonstrate practical example applications in selected environmental application domains.

Modeling Best Management Practices (BMPs) with HSPF

EPA Science Inventory

The Hydrological Simulation Program-Fortran (HSPF) is a semi-distributed watershed model, which simulates hydrology and water quality processes at user-specified spatial and temporal scales. Although HSPF is a comprehensive and highly flexible model, a number of investigators not...

Cooperation stimulation strategies for peer-to-peer wireless live video-sharing social networks.

PubMed

Lin, W Sabrina; Zhao, H Vicky; Liu, K J Ray

2010-07-01

Human behavior analysis in video sharing social networks is an emerging research area, which analyzes the behavior of users who share multimedia content and investigates the impact of human dynamics on video sharing systems. Users watching live streaming in the same wireless network share the same limited bandwidth of backbone connection to the Internet, thus, they might want to cooperate with each other to obtain better video quality. These users form a wireless live-streaming social network. Every user wishes to watch video with high quality while paying as little as possible cost to help others. This paper focuses on providing incentives for user cooperation. We propose a game-theoretic framework to model user behavior and to analyze the optimal strategies for user cooperation simulation in wireless live streaming. We first analyze the Pareto optimality and the time-sensitive bargaining equilibrium of the two-person game. We then extend the solution to the multiuser scenario. We also consider potential selfish users' cheating behavior and malicious users' attacking behavior and analyze the performance of the proposed strategies with the existence of cheating users and malicious attackers. Both our analytical and simulation results show that the proposed strategies can effectively stimulate user cooperation, achieve cheat free and attack resistance, and help provide reliable services for wireless live streaming applications.

Computer models for predicting the probability of violating CO air quality standards : the model SIMCO.

DOT National Transportation Integrated Search

1982-01-01

This report presents the user instructions and data requirements for SIMCO, a combined simulation and probability computer model developed to quantify and evaluate carbon monoxide in roadside environments. The model permits direct determinations of t...

Satellite Data of Atmospheric Pollution for U.S. Air Quality Applications: Examples of Applications, Summary of Data End-user Resources, Answers to Faqs, and Common Mistakes to Avoid

NASA Technical Reports Server (NTRS)

Duncan, Bryan Neal; Prados, Ana; Lamsal, Lok N.; Liu, Yang; Streets, David G.; Gupta, Pawan; Hilsenrath, Ernest; Kahn, Ralph A.; Nielsen, J. Eric; Beyersdorf, Andreas J.;

Satellite Data of Atmospheric Pollution for U.S. Air Quality Applications: Examples of Applications, Summary of Data End-User Resources, Answers to FAQs, and Common Mistakes to Avoid

NASA Technical Reports Server (NTRS)

Duncan, Bryan; Prados, Ana I.; Lamsal, Lok; Liu, Yang; Streets, David G.; Gupta, Pawan; Hilsenrath, Ernest; Kahn, Ralph A.; Nielsen, J. Eric; Beyersdorf, Andreas J.;

Concepts of illicit drug quality among darknet market users: Purity, embodied experience, craft and chemical knowledge.

PubMed

Bancroft, Angus; Scott Reid, Peter

2016-09-01

Users of darknet markets refer to product quality as one of the motivations for buying drugs there, and vendors present quality as a selling point. However, what users understand by quality and how they evaluate it is not clear. This article investigates how users established and compared drug quality. We used a two-stage method for investigating users' assessments. The user forum of a darknet market that we called 'Merkat' was analysed to develop emergent themes. Qualitative interviews with darknet users were conducted, then forum data was analysed again. To enhance the applicability of the findings, the forum was sampled for users who presented as dependent as well as recreational. Quality could mean reliability, purity, potency, and predictability of effect. We focused on the different kinds of knowledge users drew on to assess quality. These were: embodied; craft; and chemical. Users' evaluations of quality depended on their experience, the purpose of use, and its context. Market forums are a case of indigenous harm reduction where users share advise and experiences and can be usefully engaged with on these terms. Copyright © 2015 Elsevier B.V. All rights reserved.

The data quality analyzer: A quality control program for seismic data

NASA Astrophysics Data System (ADS)

Ringler, A. T.; Hagerty, M. T.; Holland, J.; Gonzales, A.; Gee, L. S.; Edwards, J. D.; Wilson, D.; Baker, A. M.

2015-03-01

The U.S. Geological Survey's Albuquerque Seismological Laboratory (ASL) has several initiatives underway to enhance and track the quality of data produced from ASL seismic stations and to improve communication about data problems to the user community. The Data Quality Analyzer (DQA) is one such development and is designed to characterize seismic station data quality in a quantitative and automated manner. The DQA consists of a metric calculator, a PostgreSQL database, and a Web interface: The metric calculator, SEEDscan, is a Java application that reads and processes miniSEED data and generates metrics based on a configuration file. SEEDscan compares hashes of metadata and data to detect changes in either and performs subsequent recalculations as needed. This ensures that the metric values are up to date and accurate. SEEDscan can be run as a scheduled task or on demand. The PostgreSQL database acts as a central hub where metric values and limited station descriptions are stored at the channel level with one-day granularity. The Web interface dynamically loads station data from the database and allows the user to make requests for time periods of interest, review specific networks and stations, plot metrics as a function of time, and adjust the contribution of various metrics to the overall quality grade of the station. The quantification of data quality is based on the evaluation of various metrics (e.g., timing quality, daily noise levels relative to long-term noise models, and comparisons between broadband data and event synthetics). Users may select which metrics contribute to the assessment and those metrics are aggregated into a "grade" for each station. The DQA is being actively used for station diagnostics and evaluation based on the completed metrics (availability, gap count, timing quality, deviation from a global noise model, deviation from a station noise model, coherence between co-located sensors, and comparison between broadband data and synthetics for earthquakes) on stations in the Global Seismographic Network and Advanced National Seismic System.

The quality of mental disorder information websites: a review.

PubMed

Reavley, Nicola J; Jorm, Anthony F

2011-11-01

This paper reviews studies assessing the quality of websites providing information about mental disorders. The review included 31 articles identified by searching research databases in March 2010. Topics covered included affective disorders, anxiety disorders, eating disorders, substance use disorders and schizophrenia/psychosis. The largest number of articles (13) reported studies assessing affective disorder information quality. Methodologies varied in site selection and rating methods, with some of limited validity. Most concluded that quality was poor, although quality of affective disorder sites may be improving. There is currently very little understanding of the influence of website quality on user behaviour. Future quality assessments might use the criteria informed by key behaviour change theories. A possible approach to research on websites and user behaviour might be to develop an evaluation framework incorporating strategies from behaviour change models, key mental health literacy elements and health outcomes relevant to mental health promotion. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Website Quality, Expectation, Confirmation, and End User Satisfaction: The Knowledge-Intensive Website of the Korean National Cancer Information Center

PubMed Central

Koo, Chulmo; Wati, Yulia; Park, Keeho

2011-01-01

Background The fact that patient satisfaction with primary care clinical practices and physician-patient communications has decreased gradually has brought a new opportunity to the online channel as a supplementary service to provide additional information. Objective In this study, our objectives were to examine the process of cognitive knowledge expectation-confirmation from eHealth users and to recommend the attributes of a “knowledge-intensive website.”. Knowledge expectation can be defined as users’ existing attitudes or beliefs regarding expected levels of knowledge they may gain by accessing the website. Knowledge confirmation is the extent to which user’s knowledge expectation of information systems use is realized during actual use. In our hypothesized research model, perceived information quality, presentation and attractiveness as well as knowledge expectation influence knowledge confirmation, which in turn influences perceived usefulness and end user satisfaction, which feeds back to knowledge expectation. Methods An empirical study was conducted at the National Cancer Center (NCC), Republic of Korea (South Korea), by evaluating its official website. A user survey was administered containing items to measure subjectively perceived website quality and expectation-confirmation attributes. A study sample of 198 usable responses was used for further analysis. We used the structural equation model to test the proposed research model. Results Knowledge expectation exhibited a positive effect on knowledge confirmation (beta = .27, P < .001). The paths from information quality, information presentation, and website attractiveness to knowledge confirmation were also positive and significant (beta = .24, P < .001; beta = .29, P < .001; beta = .18, P < .001, respectively). Moreover, the effect of knowledge confirmation on perceived usefulness was also positively significant (beta = .64, P < .001). Knowledge expectation together with knowledge confirmation and perceived usefulness also significantly affected end user satisfaction (beta = .22 P < .001; beta = .39, P < .001; beta = .25, P < .001, respectively). Conclusions Theoretically, this study has (1) identified knowledge-intensive website attributes, (2) enhanced the theoretical foundation of eHealth from the information systems (IS) perspective by adopting the expectation-confirmation theory (ECT), and (3) examined the importance of information and knowledge attributes and explained their impact on user satisfaction. Practically, our empirical results suggest that perceived website quality (ie, information quality, information presentation, and website attractiveness) is a core requirement for knowledge building. In addition, our study has also shown that knowledge confirmation has a greater effect on satisfaction than both knowledge expectation and perceived usefulness. PMID:22047810

Model-Driven Development of Interactive Multimedia Applications with MML

NASA Astrophysics Data System (ADS)

Pleuss, Andreas; Hussmann, Heinrich

There is an increasing demand for high-quality interactive applications which combine complex application logic with a sophisticated user interface, making use of individual media objects like graphics, animations, 3D graphics, audio or video. Their development is still challenging as it requires the integration of software design, user interface design, and media design.

Quality in End User Documentation.

ERIC Educational Resources Information Center

Morrison, Ronald

1994-01-01

Discusses quality in end-user documentation for computer applications and explains four approaches to improving quality in end-user documents. Highlights include online help, usability testing, technical writing elements, statistical approaches, and concepts relating to software quality that are also applicable to user manuals. (LRW)

Developing a theoretical model and questionnaire survey instrument to measure the success of electronic health records in residential aged care.

PubMed

Yu, Ping; Qian, Siyu

2018-01-01

Electronic health records (EHR) are introduced into healthcare organizations worldwide to improve patient safety, healthcare quality and efficiency. A rigorous evaluation of this technology is important to reduce potential negative effects on patient and staff, to provide decision makers with accurate information for system improvement and to ensure return on investment. Therefore, this study develops a theoretical model and questionnaire survey instrument to assess the success of organizational EHR in routine use from the viewpoint of nursing staff in residential aged care homes. The proposed research model incorporates six variables in the reformulated DeLone and McLean information systems success model: system quality, information quality, service quality, use, user satisfaction and net benefits. Two variables training and self-efficacy were also incorporated into the model. A questionnaire survey instrument was designed to measure the eight variables in the model. After a pilot test, the measurement scale was used to collect data from 243 nursing staff members in 10 residential aged care homes belonging to three management groups in Australia. Partial least squares path modeling was conducted to validate the model. The validated EHR systems success model predicts the impact of the four antecedent variables-training, self-efficacy, system quality and information quality-on the net benefits, the indicator of EHR systems success, through the intermittent variables use and user satisfaction. A 24-item measurement scale was developed to quantitatively evaluate the performance of an EHR system. The parsimonious EHR systems success model and the measurement scale can be used to benchmark EHR systems success across organizations and units and over time.

The relationship between building design and residents' quality of life in extra care housing schemes.

PubMed

Orrell, Alison; McKee, Kevin; Torrington, Judith; Barnes, Sarah; Darton, Robin; Netten, Ann; Lewis, Alan

2013-05-01

Well-designed housing is recognised as being an important factor in promoting a good quality of life. Specialised housing models incorporating care services, such as extra care housing (ECH) schemes are seen as enabling older people to maintain a good quality of life despite increasing health problems that can accompany ageing. Despite the variation in ECH building design little is known about the impact of ECH building design on the quality of life of building users. The evaluation of older people's living environments (EVOLVE) study collected cross-sectional data on building design and quality of life in 23 ECH schemes in England, UK. Residents' quality of life was assessed using the schedule for the evaluation of individual quality of life-direct weighting (SEIQoL-DW) and on the four domains of control, autonomy, self-realisation and pleasure on the CASP-19. Building design was measured on 12 user-related domains by means of a new tool; the EVOLVE tool. Using multilevel linear regression, significant associations were found between several aspects of building design and quality of life. Furthermore, there was evidence that the relationship between building design and quality of life was partly mediated by the dependency of participants and scheme size (number of living units). Our findings suggest that good quality building design in ECH can support the quality of life of residents, but that designing features that support the needs of both relatively independent and frail users is problematic, with the needs of highly dependent users not currently supported as well as could be hoped by ECH schemes. Copyright © 2013 Elsevier Ltd. All rights reserved.

A Spectrum Access Based on Quality of Service (QoS) in Cognitive Radio Networks.

PubMed

Zhai, Linbo; Wang, Hua; Gao, Chuangen

2016-01-01

The quality of service (QoS) is important issue for cognitive radio networks. In the cognitive radio system, the licensed users, also called primary users (PUs), are authorized to utilize the wireless spectrum, while unlicensed users, also called secondary users (SUs), are not authorized to use the wireless spectrum. SUs access the wireless spectrum opportunistically when the spectrum is idle. While SUs use an idle channel, the instance that PUs come back makes SUs terminate their communications and leave the current channel. Therefore, quality of service (QoS) is difficult to be ensured for SUs. In this paper, we first propose an analysis model to obtain QoS for cognitive radio networks such as blocking probability, completed traffic and termination probability of SUs. When the primary users use the channels frequently, QoS of SUs is difficult to be ensured, especially the termination probability. Then, we propose a channel reservation scheme to improve QoS of SUs. The scheme makes the terminated SUs move to the reserved channels and keep on communications. Simulation results show that our scheme can improve QoS of SUs especially the termination probability with a little cost of blocking probability in dynamic environment.

Modelling health care processes for eliciting user requirements: a way to link a quality paradigm and clinical information system design.

PubMed

Staccini, P; Joubert, M; Quaranta, J F; Fieschi, D; Fieschi, M

2000-01-01

Hospital information systems have to support quality improvement objectives. The design issues of health care information system can be classified into three categories: 1) time-oriented and event-labelled storage of patient data; 2) contextual support of decision-making; 3) capabilities for modular upgrading. The elicitation of the requirements has to meet users' needs in relation to both the quality (efficacy, safety) and the monitoring of all health care activities (traceability). Information analysts need methods to conceptualize clinical information systems that provide actors with individual benefits and guide behavioural changes. A methodology is proposed to elicit and structure users' requirements using a process-oriented analysis, and it is applied to the field of blood transfusion. An object-oriented data model of a process has been defined in order to identify its main components: activity, sub-process, resources, constrains, guidelines, parameters and indicators. Although some aspects of activity, such as "where", "what else", and "why" are poorly represented by the data model alone, this method of requirement elicitation fits the dynamic of data input for the process to be traced. A hierarchical representation of hospital activities has to be found for this approach to be generalised within the organisation, for the processes to be interrelated, and for their characteristics to be shared.

Modelling health care processes for eliciting user requirements: a way to link a quality paradigm and clinical information system design.

PubMed

Staccini, P; Joubert, M; Quaranta, J F; Fieschi, D; Fieschi, M

2001-12-01

Healthcare institutions are looking at ways to increase their efficiency by reducing costs while providing care services with a high level of safety. Thus, hospital information systems have to support quality improvement objectives. The elicitation of the requirements has to meet users' needs in relation to both the quality (efficacy, safety) and the monitoring of all health care activities (traceability). Information analysts need methods to conceptualise clinical information systems that provide actors with individual benefits and guide behavioural changes. A methodology is proposed to elicit and structure users' requirements using a process-oriented analysis, and it is applied to the blood transfusion process. An object-oriented data model of a process has been defined in order to organise the data dictionary. Although some aspects of activity, such as 'where', 'what else', and 'why' are poorly represented by the data model alone, this method of requirement elicitation fits the dynamic of data input for the process to be traced. A hierarchical representation of hospital activities has to be found for the processes to be interrelated, and for their characteristics to be shared, in order to avoid data redundancy and to fit the gathering of data with the provision of care.

DataFed: A Federated Data System for Visualization and Analysis of Spatio-Temporal Air Quality Data

NASA Astrophysics Data System (ADS)

Husar, R. B.; Hoijarvi, K.

2017-12-01

DataFed is a distributed web-services-based computing environment for accessing, processing, and visualizing atmospheric data in support of air quality science and management. The flexible, adaptive environment facilitates the access and flow of atmospheric data from provider to users by enabling the creation of user-driven data processing/visualization applications. DataFed `wrapper' components, non-intrusively wrap heterogeneous, distributed datasets for access by standards-based GIS web services. The mediator components (also web services) map the heterogeneous data into a spatio-temporal data model. Chained web services provide homogeneous data views (e.g., geospatial, time views) using a global multi-dimensional data model. In addition to data access and rendering, the data processing component services can be programmed for filtering, aggregation, and fusion of multidimensional data. A complete application software is written in a custom made data flow language. Currently, the federated data pool consists of over 50 datasets originating from globally distributed data providers delivering surface-based air quality measurements, satellite observations, emissions data as well as regional and global-scale air quality models. The web browser-based user interface allows point and click navigation and browsing the XYZT multi-dimensional data space. The key applications of DataFed are for exploring spatial pattern of pollutants, seasonal, weekly, diurnal cycles and frequency distributions for exploratory air quality research. Since 2008, DataFed has been used to support EPA in the implementation of the Exceptional Event Rule. The data system is also used at universities in the US, Europe and Asia.

A Web-Based Decision Support System for Assessing Regional Water-Quality Conditions and Management Actions

NASA Astrophysics Data System (ADS)

Booth, N. L.; Everman, E.; Kuo, I.; Sprague, L.; Murphy, L.

2011-12-01

A new web-based decision support system has been developed as part of the U.S. Geological Survey (USGS) National Water Quality Assessment Program's (NAWQA) effort to provide ready access to Spatially Referenced Regressions On Watershed attributes (SPARROW) results of stream water-quality conditions and to offer sophisticated scenario testing capabilities for research and water-quality planning via an intuitive graphical user interface with a map-based display. The SPARROW Decision Support System (DSS) is delivered through a web browser over an Internet connection, making it widely accessible to the public in a format that allows users to easily display water-quality conditions, distribution of nutrient sources, nutrient delivery to downstream waterbodies, and simulations of altered nutrient inputs including atmospheric and agricultural sources. The DSS offers other features for analysis including various background map layers, model output exports, and the ability to save and share prediction scenarios. SPARROW models currently supported by the DSS are based on the modified digital versions of the 1:500,000-scale River Reach File (RF1) and 1:100,000-scale National Hydrography Dataset (medium-resolution, NHDPlus) stream networks. The underlying modeling framework and server infrastructure illustrate innovations in the information technology and geosciences fields for delivering SPARROW model predictions over the web by performing intensive model computations and map visualizations of the predicted conditions within the stream network.

A Personalized Health Information Retrieval System

PubMed Central

Wang, Yunli; Liu, Zhenkai

2005-01-01

Consumers face barriers when seeking health information on the Internet. A Personalized Health Information Retrieval System (PHIRS) is proposed to recommend health information for consumers. The system consists of four modules: (1) User modeling module captures user’s preference and health interests; (2) Automatic quality filtering module identifies high quality health information; (3) Automatic text difficulty rating module classifies health information into professional or patient educational materials; and (4) User profile matching module tailors health information for individuals. The initial results show that PHIRS could assist consumers with simple search strategies. PMID:16779435

APPLICATION OF THE HSPF MODEL TO THE SOUTH FORK OF THE BROAD RIVER WATERSHED IN NORTHEASTERN GEORGIA

EPA Science Inventory

The Hydrological Simulation Program-Fortran (HSPF) is a comprehensive watershed model which simulates hydrology and water quality at user-specified temporal and spatial scales. Well-established model calibration and validation procedures are followed when adjusting model paramete...

Storm Water Management Model Applications Manual

EPA Science Inventory

The EPA Storm Water Management Model (SWMM) is a dynamic rainfall-runoff simulation model that computes runoff quantity and quality from primarily urban areas. This manual is a practical application guide for new SWMM users who have already had some previous training in hydrolog...

Addressing and Presenting Quality of Satellite Data via Web-Based Services

NASA Technical Reports Server (NTRS)

Leptoukh, Gregory; Lynnes, C.; Ahmad, S.; Fox, P.; Zednik, S.; West, P.

2011-01-01

With the recent attention to climate change and proliferation of remote-sensing data utilization, climate model and various environmental monitoring and protection applications have begun to increasingly rely on satellite measurements. Research application users seek good quality satellite data, with uncertainties and biases provided for each data point. However, different communities address remote sensing quality issues rather inconsistently and differently. We describe our attempt to systematically characterize, capture, and provision quality and uncertainty information as it applies to the NASA MODIS Aerosol Optical Depth data product. In particular, we note the semantic differences in quality/bias/uncertainty at the pixel, granule, product, and record levels. We outline various factors contributing to uncertainty or error budget; errors. Web-based science analysis and processing tools allow users to access, analyze, and generate visualizations of data while alleviating users from having directly managing complex data processing operations. These tools provide value by streamlining the data analysis process, but usually shield users from details of the data processing steps, algorithm assumptions, caveats, etc. Correct interpretation of the final analysis requires user understanding of how data has been generated and processed and what potential biases, anomalies, or errors may have been introduced. By providing services that leverage data lineage provenance and domain-expertise, expert systems can be built to aid the user in understanding data sources, processing, and the suitability for use of products generated by the tools. We describe our experiences developing a semantic, provenance-aware, expert-knowledge advisory system applied to NASA Giovanni web-based Earth science data analysis tool as part of the ESTO AIST-funded Multi-sensor Data Synergy Advisor project.

Users manual for a one-dimensional Lagrangian transport model

USGS Publications Warehouse

Schoellhamer, D.H.; Jobson, H.E.

1986-01-01

A Users Manual for the Lagrangian Transport Model (LTM) is presented. The LTM uses Lagrangian calculations that are based on a reference frame moving with the river flow. The Lagrangian reference frame eliminates the need to numerically solve the convective term of the convection-diffusion equation and provides significant numerical advantages over the more commonly used Eulerian reference frame. When properly applied, the LTM can simulate riverine transport and decay processes within the accuracy required by most water quality studies. The LTM is applicable to steady or unsteady one-dimensional unidirectional flows in fixed channels with tributary and lateral inflows. Application of the LTM is relatively simple and optional capabilities improve the model 's convenience. Appendices give file formats and three example LTM applications that include the incorporation of the QUAL II water quality model 's reaction kinetics into the LTM. (Author 's abstract)

The data quality analyzer: a quality control program for seismic data

USGS Publications Warehouse

Ringler, Adam; Hagerty, M.T.; Holland, James F.; Gonzales, A.; Gee, Lind S.; Edwards, J.D.; Wilson, David; Baker, Adam

2015-01-01

The quantification of data quality is based on the evaluation of various metrics (e.g., timing quality, daily noise levels relative to long-term noise models, and comparisons between broadband data and event synthetics). Users may select which metrics contribute to the assessment and those metrics are aggregated into a “grade” for each station. The DQA is being actively used for station diagnostics and evaluation based on the completed metrics (availability, gap count, timing quality, deviation from a global noise model, deviation from a station noise model, coherence between co-located sensors, and comparison between broadband data and synthetics for earthquakes) on stations in the Global Seismographic Network and Advanced National Seismic System.

Exploring the critical quality attributes and models of smart homes.

PubMed

Ted Luor, Tainyi; Lu, Hsi-Peng; Yu, Hueiju; Lu, Yinshiu

2015-12-01

Research on smart homes has significantly increased in recent years owing to their considerably improved affordability and simplicity. However, the challenge is that people have different needs (or attitudes toward smart homes), and provision should be tailored to individuals. A few studies have classified the functions of smart homes. Therefore, the Kano model is first adopted as a theoretical base to explore whether the functional classifications of smart homes are attractive or necessary, or both. Second, three models and test user attitudes toward three function types of smart homes are proposed. Based on the Kano model, the principal results, namely, two "Attractive Quality" and nine "Indifferent Quality" items, are found. Verification of the hypotheses also indicates that the entertainment, security, and automation functions are significantly correlated with the variables "perceive useful" and "attitude." Cost consideration is negatively correlated with attitudes toward entertainment and automation. Results suggest that smart home providers should survey user needs for their product instead of merely producing smart homes based on the design of the builder or engineer. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Role-Based And Adaptive User Interface Designs In A Teledermatology Consult System: A Way To Secure And A Way To Enhance

PubMed Central

Lin, Yi-Jung; Speedie, Stuart

2003-01-01

User interface design is one of the most important parts of developing applications. Nowadays, a quality user interface must not only accommodate interaction between machines and users, but also needs to recognize the differences and provide functionalities for users from role-to-role or even individual-to-individual. With the web-based application of our Teledermatology consult system, the development environment provides us highly useful opportunities to create dynamic user interfaces, which lets us to gain greater access control and has the potential to increase efficiency of the system. We will describe the two models of user interfaces in our system: Role-based and Adaptive. PMID:14728419

The STARTEC Decision Support Tool for Better Tradeoffs between Food Safety, Quality, Nutrition, and Costs in Production of Advanced Ready-to-Eat Foods.

PubMed

Skjerdal, Taran; Gefferth, Andras; Spajic, Miroslav; Estanga, Edurne Gaston; de Cecare, Alessandra; Vitali, Silvia; Pasquali, Frederique; Bovo, Federica; Manfreda, Gerardo; Mancusi, Rocco; Trevisiani, Marcello; Tessema, Girum Tadesse; Fagereng, Tone; Moen, Lena Haugland; Lyshaug, Lars; Koidis, Anastasios; Delgado-Pando, Gonzalo; Stratakos, Alexandros Ch; Boeri, Marco; From, Cecilie; Syed, Hyat; Muccioli, Mirko; Mulazzani, Roberto; Halbert, Catherine

2017-01-01

A prototype decision support IT-tool for the food industry was developed in the STARTEC project. Typical processes and decision steps were mapped using real life production scenarios of participating food companies manufacturing complex ready-to-eat foods. Companies looked for a more integrated approach when making food safety decisions that would align with existing HACCP systems. The tool was designed with shelf life assessments and data on safety, quality, and costs, using a pasta salad meal as a case product. The process flow chart was used as starting point, with simulation options at each process step. Key parameters like pH, water activity, costs of ingredients and salaries, and default models for calculations of Listeria monocytogenes , quality scores, and vitamin C, were placed in an interactive database. Customization of the models and settings was possible on the user-interface. The simulation module outputs were provided as detailed curves or categorized as "good"; "sufficient"; or "corrective action needed" based on threshold limit values set by the user. Possible corrective actions were suggested by the system. The tool was tested and approved by end-users based on selected ready-to-eat food products. Compared to other decision support tools, the STARTEC-tool is product-specific and multidisciplinary and includes interpretation and targeted recommendations for end-users.

The STARTEC Decision Support Tool for Better Tradeoffs between Food Safety, Quality, Nutrition, and Costs in Production of Advanced Ready-to-Eat Foods

PubMed Central

Gefferth, Andras; Spajic, Miroslav; Estanga, Edurne Gaston; Vitali, Silvia; Pasquali, Frederique; Bovo, Federica; Manfreda, Gerardo; Mancusi, Rocco; Tessema, Girum Tadesse; Fagereng, Tone; Moen, Lena Haugland; Lyshaug, Lars; Koidis, Anastasios; Delgado-Pando, Gonzalo; Stratakos, Alexandros Ch.; Boeri, Marco; From, Cecilie; Syed, Hyat; Muccioli, Mirko; Mulazzani, Roberto; Halbert, Catherine

2017-01-01

A prototype decision support IT-tool for the food industry was developed in the STARTEC project. Typical processes and decision steps were mapped using real life production scenarios of participating food companies manufacturing complex ready-to-eat foods. Companies looked for a more integrated approach when making food safety decisions that would align with existing HACCP systems. The tool was designed with shelf life assessments and data on safety, quality, and costs, using a pasta salad meal as a case product. The process flow chart was used as starting point, with simulation options at each process step. Key parameters like pH, water activity, costs of ingredients and salaries, and default models for calculations of Listeria monocytogenes, quality scores, and vitamin C, were placed in an interactive database. Customization of the models and settings was possible on the user-interface. The simulation module outputs were provided as detailed curves or categorized as “good”; “sufficient”; or “corrective action needed” based on threshold limit values set by the user. Possible corrective actions were suggested by the system. The tool was tested and approved by end-users based on selected ready-to-eat food products. Compared to other decision support tools, the STARTEC-tool is product-specific and multidisciplinary and includes interpretation and targeted recommendations for end-users. PMID:29457031

Evaluation and Quality Control for the Copernicus Seasonal Forecast Systems

NASA Astrophysics Data System (ADS)

Manubens, N.; Hunter, A.; Bedia, J.; Bretonnière, P. A.; Bhend, J.; Doblas-Reyes, F. J.

2017-12-01

The EU funded Copernicus Climate Change Service (C3S) will provide authoritative information about past, current and future climate for a wide range of users, from climate scientists to stakeholders from a wide range of sectors including insurance, energy or transport. It has been recognized that providing information about the products' quality and provenance is paramount to establish trust in the service and allow users to make best use of the available information. This presentation outlines the work being conducted within the Quality Assurance for Multi-model Seasonal Forecast Products project (QA4Seas). The aim of QA4Seas is to develop a strategy for the evaluation and quality control (EQC) of the multi-model seasonal forecasts provided by C3S. First, we present the set of guidelines the data providers must comply with, ensuring the data is fully traceable and harmonized across data sets. Second, we discuss the ongoing work on defining a provenance and metadata model that is able to encode such information, and that can be extended to describe the steps followed to obtain the final verification products such as maps and time series of forecast quality measures. The metadata model is based on the Resource Description Framework W3C standard, being thus extensible and reusable. It benefits from widely adopted vocabularies to describe data provenance and workflows, as well as from expert consensus and community-support for the development of the verification and downscaling specific ontologies. Third, we describe the open source software being developed to generate fully reproducible and certifiable seasonal forecast products, which also attaches provenance and metadata information to the verification measures and enables the user to visually inspect the quality of the C3S products. QA4Seas is seeking collaboration with similar initiatives, as well as extending the discussion to interested parties outside the C3S community to share experiences and establish global common guidelines or best practices regarding data provenance.

Optimizing basin-scale coupled water quantity and water quality man-agement with stochastic dynamic programming

NASA Astrophysics Data System (ADS)

Davidsen, Claus; Liu, Suxia; Mo, Xingguo; Engelund Holm, Peter; Trapp, Stefan; Rosbjerg, Dan; Bauer-Gottwein, Peter

2015-04-01

Few studies address water quality in hydro-economic models, which often focus primarily on optimal allocation of water quantities. Water quality and water quantity are closely coupled, and optimal management with focus solely on either quantity or quality may cause large costs in terms of the oth-er component. In this study, we couple water quality and water quantity in a joint hydro-economic catchment-scale optimization problem. Stochastic dynamic programming (SDP) is used to minimize the basin-wide total costs arising from water allocation, water curtailment and water treatment. The simple water quality module can handle conservative pollutants, first order depletion and non-linear reactions. For demonstration purposes, we model pollutant releases as biochemical oxygen demand (BOD) and use the Streeter-Phelps equation for oxygen deficit to compute the resulting min-imum dissolved oxygen concentrations. Inelastic water demands, fixed water allocation curtailment costs and fixed wastewater treatment costs (before and after use) are estimated for the water users (agriculture, industry and domestic). If the BOD concentration exceeds a given user pollution thresh-old, the user will need to pay for pre-treatment of the water before use. Similarly, treatment of the return flow can reduce the BOD load to the river. A traditional SDP approach is used to solve one-step-ahead sub-problems for all combinations of discrete reservoir storage, Markov Chain inflow clas-ses and monthly time steps. Pollution concentration nodes are introduced for each user group and untreated return flow from the users contribute to increased BOD concentrations in the river. The pollutant concentrations in each node depend on multiple decision variables (allocation and wastewater treatment) rendering the objective function non-linear. Therefore, the pollution concen-tration decisions are outsourced to a genetic algorithm, which calls a linear program to determine the remainder of the decision variables. This hybrid formulation keeps the optimization problem computationally feasible and represents a flexible and customizable method. The method has been applied to the Ziya River basin, an economic hotspot located on the North China Plain in Northern China. The basin is subject to severe water scarcity, and the rivers are heavily polluted with wastewater and nutrients from diffuse sources. The coupled hydro-economic optimiza-tion model can be used to assess costs of meeting additional constraints such as minimum water qual-ity or to economically prioritize investments in waste water treatment facilities based on economic criteria.

USING MM5 VERSION 2 WITH CMAQ AND MODELS-3, A USER'S GUIDE AND TUTORIAL

EPA Science Inventory

Meteorological data are important in many of the processes simulated in the Community Multi-Scale Air Quality (CMAQ) model and the Models-3 framework. The first meteorology model that has been selected and evaluated with CMAQ is the Fifth-Generation Pennsylvania State University...

--No Title--

Science.gov Websites

, the user is responsbile for controlling the quality of observational data # and ensuring data is also # # OUTPUTS: # 1) observational data (named data_obs) and Model data (named data_model) # stored under " observational and model data, stored in correct locations # 2) "data" and "figures" folders

STORM WATER MANAGEMENT MODEL USER'S MANUAL VERSION 5.0

EPA Science Inventory

The EPA Storm Water Management Model (SWMM) is a dynamic rainfall-runoff simulation model used for single event or long-term (continuous) simulation of runoff quantity and quality from primarily urban areas. SWMM was first developed in 1971 and has undergone several major upgrade...

Accuracy Dimensions in Remote Sensing

NASA Astrophysics Data System (ADS)

Barsi, Á.; Kugler, Zs.; László, I.; Szabó, Gy.; Abdulmutalib, H. M.

2018-04-01

The technological developments in remote sensing (RS) during the past decade has contributed to a significant increase in the size of data user community. For this reason data quality issues in remote sensing face a significant increase in importance, particularly in the era of Big Earth data. Dozens of available sensors, hundreds of sophisticated data processing techniques, countless software tools assist the processing of RS data and contributes to a major increase in applications and users. In the past decades, scientific and technological community of spatial data environment were focusing on the evaluation of data quality elements computed for point, line, area geometry of vector and raster data. Stakeholders of data production commonly use standardised parameters to characterise the quality of their datasets. Yet their efforts to estimate the quality did not reach the general end-user community running heterogeneous applications who assume that their spatial data is error-free and best fitted to the specification standards. The non-specialist, general user group has very limited knowledge how spatial data meets their needs. These parameters forming the external quality dimensions implies that the same data system can be of different quality to different users. The large collection of the observed information is uncertain in a level that can decry the reliability of the applications. Based on prior paper of the authors (in cooperation within the Remote Sensing Data Quality working group of ISPRS), which established a taxonomy on the dimensions of data quality in GIS and remote sensing domains, this paper is aiming at focusing on measures of uncertainty in remote sensing data lifecycle, focusing on land cover mapping issues. In the paper we try to introduce how quality of the various combination of data and procedures can be summarized and how services fit the users' needs. The present paper gives the theoretic overview of the issue, besides selected, practice-oriented approaches are evaluated too, finally widely-used dimension metrics like Root Mean Squared Error (RMSE) or confusion matrix are discussed. The authors present data quality features of well-defined and poorly defined object. The central part of the study is the land cover mapping, describing its accuracy management model, presented relevance and uncertainty measures of its influencing quality dimensions. In the paper theory is supported by a case study, where the remote sensing technology is used for supporting the area-based agricultural subsidies of the European Union, in Hungarian administration.

PROGRAM PARAMS USERS GUIDE

EPA Science Inventory

PARAMS is a Windows-based computer program that implements 30 methods for estimating the parameters in indoor emissions source models, which are an essential component of indoor air quality (IAQ) and exposure models. These methods fall into eight categories: (1) the properties o...

Technology Acceptance and Adoption of Innovative Smartphone Uses among Hospital Employees

PubMed Central

Moon, Byung Chan

2014-01-01

Objectives The number of healthcare institutions adopting smartphones continues to increase, implying that their utilization is undoubtedly gaining attention. Understanding the needs of smartphone users will provide a greater opportunity for successful information technology acceptance by expanding the scope of its utilization. This study focuses on how smartphones are accepted and utilized in hospitals and analyzes the factors influencing users' attitude, social influence, and intention of use. Methods For the study model, the researcher has mainly adopted the Theory of Reasoned Action and further modified and used the models of Technology Acceptance and Information Systems Success. To test the model empirically, a survey was conducted with 122 professionals on information development teams in Korean tertiary hospitals. Results The common smartphone usage modes were Internet searching, e-mail, scheduling, and social networking in consecutive order. Phone calls consisted of 51.4% of work-related purposes, while other functions, such as text message, Web browser, and scheduling, were mostly used for personal purposes. Costs, contents quality, innovation, ease of use, and support were shown to have statistically significant effects on user attitude, and social influence, portability, security, content quality, and innovation were significant. User attitude and social influence were both statistically significant with respect to intention of use, with user attitude greater than social influence. Conclusions The participating staff were analyzed as having strong personal faith and principles, independent from their external environment. Timely information exchanges among medical staff will facilitate appropriate communication and improved health services to patients in need. PMID:25405067

Technology Acceptance and Adoption of Innovative Smartphone Uses among Hospital Employees.

PubMed

Moon, Byung Chan; Chang, Hyejung

2014-10-01

The number of healthcare institutions adopting smartphones continues to increase, implying that their utilization is undoubtedly gaining attention. Understanding the needs of smartphone users will provide a greater opportunity for successful information technology acceptance by expanding the scope of its utilization. This study focuses on how smartphones are accepted and utilized in hospitals and analyzes the factors influencing users' attitude, social influence, and intention of use. For the study model, the researcher has mainly adopted the Theory of Reasoned Action and further modified and used the models of Technology Acceptance and Information Systems Success. To test the model empirically, a survey was conducted with 122 professionals on information development teams in Korean tertiary hospitals. The common smartphone usage modes were Internet searching, e-mail, scheduling, and social networking in consecutive order. Phone calls consisted of 51.4% of work-related purposes, while other functions, such as text message, Web browser, and scheduling, were mostly used for personal purposes. Costs, contents quality, innovation, ease of use, and support were shown to have statistically significant effects on user attitude, and social influence, portability, security, content quality, and innovation were significant. User attitude and social influence were both statistically significant with respect to intention of use, with user attitude greater than social influence. The participating staff were analyzed as having strong personal faith and principles, independent from their external environment. Timely information exchanges among medical staff will facilitate appropriate communication and improved health services to patients in need.

[Assessment levels of the user's satisfaction in a private hospital].

PubMed

da Cruz, Wilma Batista Souza; Melleiro, Marta Maria

2010-03-01

The objective of this study was to analyze the satisfaction of the users of a private hospital in terms of a number of attributes of the services in units. This exploratory, descriptive study used a quantitative approach and was developed in a private hospital in the city of São Paulo. The casuistry consisted of 71 users and data collection was performed during the period from March to August 2007, using a derivative of the scale model of the Service Quality (SERVQUAL) of the evaluative model of Parasuraman et al. The level of overall satisfaction ranged around 95%. The assurance (96%) and reliability (96%) were considered the most important dimensions of quality, followed by empathy (95%), responsiveness (93%) and tangibility (88%). Medical and nursing staffs introduced high levels of satisfaction. 91% has intention to recommend the hospital. This research provided the knowledge of the attributes most important in terms of satisfaction and contributed to confirming or reshaping assistance and management processes.

Impact of music on the quality of life of cochlear implant users: a focus group study.

PubMed

Dritsakis, Giorgos; van Besouw, Rachel M; O' Meara, Aoife

2017-07-01

To study the aspects of the quality of life (QoL) on which music has an impact in adult cochlear implant (CI) users. Thirty adult CI users aged between 18 and 81 years old with a wide range of patient characteristics and musical backgrounds participated in the study. Six focus group discussions about music in everyday life were conducted and data were analysed using template analysis based on the QoL model of the World Health Organisation Quality of Life BREF questionnaire. A theoretical framework of the impact of music on the QoL was developed. Music was reported to contribute to many aspects of physical, psychological, and social well-being in adult CI users. These positive effects of music on QoL were similar to what has been reported in the literature for normal-hearing adults. However, difficulties in music perception and enjoyment were found to have a negative impact on CI users' QoL, especially by causing unpleasant feelings and limited participation in music-related or routine daily activities. These findings suggest that an improvement in music experiences of CI users may lead to improvements in QoL and therefore support the need for music rehabilitation. However, the relative importance of music overall and of specific aspects of music for each individual should be measured for an accurate assessment of the impact of music on the QoL of CI users.

Section 3. The SPARROW Surface Water-Quality Model: Theory, Application and User Documentation

USGS Publications Warehouse

Schwarz, G.E.; Hoos, A.B.; Alexander, R.B.; Smith, R.A.

2006-01-01

SPARROW (SPAtially Referenced Regressions On Watershed attributes) is a watershed modeling technique for relating water-quality measurements made at a network of monitoring stations to attributes of the watersheds containing the stations. The core of the model consists of a nonlinear regression equation describing the non-conservative transport of contaminants from point and diffuse sources on land to rivers and through the stream and river network. The model predicts contaminant flux, concentration, and yield in streams and has been used to evaluate alternative hypotheses about the important contaminant sources and watershed properties that control transport over large spatial scales. This report provides documentation for the SPARROW modeling technique and computer software to guide users in constructing and applying basic SPARROW models. The documentation gives details of the SPARROW software, including the input data and installation requirements, and guidance in the specification, calibration, and application of basic SPARROW models, as well as descriptions of the model output and its interpretation. The documentation is intended for both researchers and water-resource managers with interest in using the results of existing models and developing and applying new SPARROW models. The documentation of the model is presented in two parts. Part 1 provides a theoretical and practical introduction to SPARROW modeling techniques, which includes a discussion of the objectives, conceptual attributes, and model infrastructure of SPARROW. Part 1 also includes background on the commonly used model specifications and the methods for estimating and evaluating parameters, evaluating model fit, and generating water-quality predictions and measures of uncertainty. Part 2 provides a user's guide to SPARROW, which includes a discussion of the software architecture and details of the model input requirements and output files, graphs, and maps. The text documentation and computer software are available on the Web at http://usgs.er.gov/sparrow/sparrow-mod/.

Individual and Environmental Correlates to Quality of Life in Park Users in Colombia

PubMed Central

Camargo, Diana Marina

2017-01-01

Purpose: To explore individual and environmental correlates to quality of life (QoL) in park users in Colombia. Methods: A cross-sectional study with face-to-face interviews was conducted with 1392 park users from ten parks in Colombia. The survey included sociodemographic questions, health condition assessed with EuroQuol-5-Dimensions-5-Levels; in addition, questions about accessibility to the parks and perceptions about quality of infrastructure and green areas were asked. The Spanish version of the questionnaire EUROHIS-QOL-8 items was applied to assess QoL. Log-binomial regression models were applied for analyses. Results: Years of schooling, visits to the park with a companion, active use of the park, a maximum score for quality of trees and walking paths, and the perception of safety on the way to the park were positively associated with a better QoL (p < 0.05). Health conditions related to problems in the ability to perform activities of daily living and anxiety/depression showed negative associations. Conclusions: The present study contributes to the Latin American studies by providing information on how parks in an intermediate city may contribute to increased QoL of park users through safety in neighborhoods, social support, active use, and aesthetics, cleanliness, and care of green areas. PMID:29048373

Developing a theoretical model and questionnaire survey instrument to measure the success of electronic health records in residential aged care

PubMed Central

Yu, Ping; Qian, Siyu

2018-01-01

Electronic health records (EHR) are introduced into healthcare organizations worldwide to improve patient safety, healthcare quality and efficiency. A rigorous evaluation of this technology is important to reduce potential negative effects on patient and staff, to provide decision makers with accurate information for system improvement and to ensure return on investment. Therefore, this study develops a theoretical model and questionnaire survey instrument to assess the success of organizational EHR in routine use from the viewpoint of nursing staff in residential aged care homes. The proposed research model incorporates six variables in the reformulated DeLone and McLean information systems success model: system quality, information quality, service quality, use, user satisfaction and net benefits. Two variables training and self-efficacy were also incorporated into the model. A questionnaire survey instrument was designed to measure the eight variables in the model. After a pilot test, the measurement scale was used to collect data from 243 nursing staff members in 10 residential aged care homes belonging to three management groups in Australia. Partial least squares path modeling was conducted to validate the model. The validated EHR systems success model predicts the impact of the four antecedent variables—training, self-efficacy, system quality and information quality—on the net benefits, the indicator of EHR systems success, through the intermittent variables use and user satisfaction. A 24-item measurement scale was developed to quantitatively evaluate the performance of an EHR system. The parsimonious EHR systems success model and the measurement scale can be used to benchmark EHR systems success across organizations and units and over time. PMID:29315323

Evaluating the Informative Quality of Documents in SGML Format from Judgements by Means of Fuzzy Linguistic Techniques Based on Computing with Words.

ERIC Educational Resources Information Center

Herrera-Viedma, Enrique; Peis, Eduardo

2003-01-01

Presents a fuzzy evaluation method of SGML documents based on computing with words. Topics include filtering the amount of information available on the Web to assist users in their search processes; document type definitions; linguistic modeling; user-system interaction; and use with XML and other markup languages. (Author/LRW)

An Integrated Decision Model for Evaluating Educational Web Sites from the Fuzzy Subjective and Objective Perspectives

ERIC Educational Resources Information Center

Huang, Tony Cheng-Kui; Huang, Chih-Hong

2010-01-01

With advances in information and network technologies, lots of data have been digitized to reveal information for users by the construction of Web sites. Unfortunately, they are both overloading and overlapping in Internet so that users cannot distinguish their quality. To address this issue in education, Hwang, Huang, and Tseng proposed a group…

Assessment of sound quality perception in cochlear implant users during music listening.

PubMed

Roy, Alexis T; Jiradejvong, Patpong; Carver, Courtney; Limb, Charles J

2012-04-01

Although cochlear implant (CI) users frequently report deterioration of sound quality when listening to music, few methods exist to quantify these subjective claims. 1) To design a novel research method for quantifying sound quality perception in CI users during music listening; 2) To validate this method by assessing one attribute of music perception, bass frequency perception, which is hypothesized to be relevant to overall musical sound quality perception. Limitations in bass frequency perception contribute to CI-mediated sound quality deteriorations. The proposed method will quantify this deterioration by measuring CI users' impaired ability to make sound quality discriminations among musical stimuli with variable amounts of bass frequency removal. A method commonly used in the audio industry (multiple stimulus with hidden reference and anchor [MUSHRA]) was adapted for CI users, referred to as CI-MUSHRA. CI users and normal hearing controls were presented with 7 sound quality versions of a musical segment: 5 high pass filter cutoff versions (200-, 400-, 600-, 800-, 1000-Hz) with decreasing amounts of bass information, an unaltered version ("hidden reference"), and a highly altered version (1,000-1,200 Hz band pass filter; "anchor"). Participants provided sound quality ratings between 0 (very poor) and 100 (excellent) for each version; ratings reflected differences in perceived sound quality among stimuli. CI users had greater difficulty making overall sound quality discriminations as a function of bass frequency loss than normal hearing controls, as demonstrated by a significantly weaker correlation between bass frequency content and sound quality ratings. In particular, CI users could not perceive sound quality difference among stimuli missing up to 400 Hz of bass frequency information. Bass frequency impairments contribute to sound quality deteriorations during music listening for CI users. CI-MUSHRA provided a systematic and quantitative assessment of this reduced sound quality. Although the effects of bass frequency removal were studied here, we advocate CI-MUSHRA as a user-friendly and versatile research tool to measure the effects of a wide range of acoustic manipulations on sound quality perception in CI users.

Mobility Device Quality Affects Participation Outcomes for People With Disabilities: A Structural Equation Modeling Analysis.

PubMed

Magasi, Susan; Wong, Alex; Miskovic, Ana; Tulsky, David; Heinemann, Allen W

2018-01-01

To test the effect that indicators of mobility device quality have on participation outcomes in community-dwelling adults with spinal cord injury, traumatic brain injury, and stroke by using structural equation modeling. Survey, cross-sectional study, and model testing. Clinical research space at 2 academic medical centers and 1 free-standing rehabilitation hospital. Community-dwelling adults (N=250; mean age, 48±14.3y) with spinal cord injury, traumatic brain injury, and stroke. Not applicable. The Mobility Device Impact Scale, Patient-Reported Outcomes Measurement Information System Social Function (version 2.0) scale, including Ability to Participate in Social Roles and Activities and Satisfaction with Social Roles and Activities, and the 2 Community Participation Indicators' enfranchisement scales. Details about device quality (reparability, reliability, ease of maintenance) and device type were also collected. Respondents used ambulation aids (30%), manual (34%), and power wheelchairs (30%). Indicators of device quality had a moderating effect on participation outcomes, with 3 device quality variables (repairability, ease of maintenance, device reliability) accounting for 20% of the variance in participation. Wheelchair users reported lower participation enfranchisement than did ambulation aid users. Mobility device quality plays an important role in participation outcomes. It is critical that people have access to mobility devices and that these devices be reliable. Copyright © 2017 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

USER MANUAL FOR THE EPA THIRD-GENERATION AIR QUALITY MODELING SYSTEM (MODELS-3 VERSION 3.0)

EPA Science Inventory

Models-3 is a flexible software system designed to simplify the development and use of environmental assessment and other decision support tools. It is designed for applications ranging from regulatory and policy analysis to understanding the complex interactions of atmospheri...

Improving SWAT model prediction using an upgraded denitrification scheme and constrained auto calibration

USDA-ARS?s Scientific Manuscript database

The reliability of common calibration practices for process based water quality models has recently been questioned. A so-called “adequately calibrated model” may contain input errors not readily identifiable by model users, or may not realistically represent intra-watershed responses. These short...

Results of a transparent expert consultation on patient and public involvement in palliative care research.

PubMed

Daveson, Barbara A; de Wolf-Linder, Susanne; Witt, Jana; Newson, Kirstie; Morris, Carolyn; Higginson, Irene J; Evans, Catherine J

2015-12-01

Support and evidence for patient, unpaid caregiver and public involvement in research (user involvement) are growing. Consensus on how best to involve users in palliative care research is lacking. To determine an optimal user-involvement model for palliative care research. We hosted a consultation workshop using expert presentations, discussion and nominal group technique to generate recommendations and consensus on agreement of importance. A total of 35 users and 32 researchers were approached to attend the workshop, which included break-out groups and a ranking exercise. Descriptive statistical analysis to establish consensus and highlight divergence was applied. Qualitative analysis of discussions was completed to aid interpretation of findings. Participants involved in palliative care research were invited to a global research institute, UK. A total of 12 users and 5 researchers participated. Users wanted their involvement to be more visible, including during dissemination, with a greater emphasis on the difference their involvement makes. Researchers wanted to improve productivity, relevance and quality through involvement. Users and researchers agreed that an optimal model should consist of (a) early involvement to ensure meaningful involvement and impact and (b) diverse virtual and face-to-face involvement methods to ensure flexibility. For involvement in palliative care research to succeed, early and flexible involvement is required. Researchers should advertise opportunities for involvement and promote impact of involvement via dissemination plans. Users should prioritise adding value to research through enhancing productivity, quality and relevance. More research is needed not only to inform implementation and ensure effectiveness but also to investigate the cost-effectiveness of involvement in palliative care research. © The Author(s) 2015.

Results of a transparent expert consultation on patient and public involvement in palliative care research

PubMed Central

Daveson, Barbara A; de Wolf-Linder, Susanne; Witt, Jana; Newson, Kirstie; Morris, Carolyn; Higginson, Irene J; Evans, Catherine J

2015-01-01

Background: Support and evidence for patient, unpaid caregiver and public involvement in research (user involvement) are growing. Consensus on how best to involve users in palliative care research is lacking. Aim: To determine an optimal user-involvement model for palliative care research. Design: We hosted a consultation workshop using expert presentations, discussion and nominal group technique to generate recommendations and consensus on agreement of importance. A total of 35 users and 32 researchers were approached to attend the workshop, which included break-out groups and a ranking exercise. Descriptive statistical analysis to establish consensus and highlight divergence was applied. Qualitative analysis of discussions was completed to aid interpretation of findings. Setting/participants: Participants involved in palliative care research were invited to a global research institute, UK. Results: A total of 12 users and 5 researchers participated. Users wanted their involvement to be more visible, including during dissemination, with a greater emphasis on the difference their involvement makes. Researchers wanted to improve productivity, relevance and quality through involvement. Users and researchers agreed that an optimal model should consist of (a) early involvement to ensure meaningful involvement and impact and (b) diverse virtual and face-to-face involvement methods to ensure flexibility. Conclusion: For involvement in palliative care research to succeed, early and flexible involvement is required. Researchers should advertise opportunities for involvement and promote impact of involvement via dissemination plans. Users should prioritise adding value to research through enhancing productivity, quality and relevance. More research is needed not only to inform implementation and ensure effectiveness but also to investigate the cost-effectiveness of involvement in palliative care research. PMID:25931336

The use of sequential indicator simulation to characterize geostatistical uncertainty; Yucca Mountain Site Characterization Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hansen, K.M.

1992-10-01

Sequential indicator simulation (SIS) is a geostatistical technique designed to aid in the characterization of uncertainty about the structure or behavior of natural systems. This report discusses a simulation experiment designed to study the quality of uncertainty bounds generated using SIS. The results indicate that, while SIS may produce reasonable uncertainty bounds in many situations, factors like the number and location of available sample data, the quality of variogram models produced by the user, and the characteristics of the geologic region to be modeled, can all have substantial effects on the accuracy and precision of estimated confidence limits. It ismore » recommended that users of SIS conduct validation studies for the technique on their particular regions of interest before accepting the output uncertainty bounds.« less

Correcting bias in self-rated quality of life: an application of anchoring vignettes and ordinal regression models to better understand QoL differences across commuting modes.

PubMed

Crane, Melanie; Rissel, Chris; Greaves, Stephen; Gebel, Klaus

2016-02-01

Likert scales are frequently used in public health research, but are subject to scale perception bias. This study sought to explore scale perception bias in quality-of-life (QoL) self-assessment and assess its relationships with commuting mode in the Sydney Travel and Health Study. Multilevel ordinal logistic regression analysis was used to analyse the association between two global QoL items about overall QoL and health satisfaction, with usual travel mode to work or study. Anchoring vignettes were applied using parametric and simpler nonparametric methods to detect and adjust for differences in reporting behaviour across age, sex, education, and income groups. The anchoring vignettes exposed differences in scale responses across demographic groups. After adjusting for these biases, public transport users (OR = 0.37, 95 % CI 0.21-0.65), walkers (OR = 0.44, 95 % CI 0.24-0.82), and motor vehicle users (OR = 0.47, 95 % CI 0.25-0.86) were all found to have lower odds of reporting high QoL compared with bicycle commuters. Similarly, the odds of reporting high health satisfaction were found to be proportionally lower amongst all competing travel modes: motor vehicle users (OR = 0.31, 95 % CI 0.18-0.56), public transport users (OR = 0.34, 95 % CI 0.20-0.57), and walkers (OR = 0.35, 95 % CI 0.20-0.64) when compared with cyclists. Fewer differences were observed in the unadjusted models. Application of the vignettes by the two approaches removed scaling biases, thereby improving the accuracy of the analyses of the associations between travel mode and quality of life. The adjusted results revealed higher quality of life in bicycle commuters compared with all other travel mode users.

Network-based modeling and intelligent data mining of social media for improving care.

PubMed

Akay, Altug; Dragomir, Andrei; Erlandsson, Bjorn-Erik

2015-01-01

Intelligently extracting knowledge from social media has recently attracted great interest from the Biomedical and Health Informatics community to simultaneously improve healthcare outcomes and reduce costs using consumer-generated opinion. We propose a two-step analysis framework that focuses on positive and negative sentiment, as well as the side effects of treatment, in users' forum posts, and identifies user communities (modules) and influential users for the purpose of ascertaining user opinion of cancer treatment. We used a self-organizing map to analyze word frequency data derived from users' forum posts. We then introduced a novel network-based approach for modeling users' forum interactions and employed a network partitioning method based on optimizing a stability quality measure. This allowed us to determine consumer opinion and identify influential users within the retrieved modules using information derived from both word-frequency data and network-based properties. Our approach can expand research into intelligently mining social media data for consumer opinion of various treatments to provide rapid, up-to-date information for the pharmaceutical industry, hospitals, and medical staff, on the effectiveness (or ineffectiveness) of future treatments.

Microcomputer pollution model for civilian airports and Air Force Bases. Model application and background

DOE Office of Scientific and Technical Information (OSTI.GOV)

Segal, H.M.

1988-08-01

This is one of three reports describing the Emissions and Dispersion Modeling System (EDMS). All reports use the same main title--A MICROCOMPUTER MODEL FOR CIVILIAN AIRPORTS AND AIR FORCE BASES--but different subtitles. The subtitles are: (1) USER'S GUIDE - ISSUE 2 (FAA-EE-88-3/ESL-TR-88-54); (2) MODEL DESCRIPTION (FAA-EE-88-4/ESL-TR-88-53); (S) MODEL APPLICATION AND BACKGROUND (FAA-EE-88-5/ESL-TR-88-55). The first and second reports above describe the EDMS model and provide instructions for its use. This is the third report. IT consists of an accumulation of five key documents describing the development and use of the EDMS model. This report is prepared in accordance with discussions withmore » the EPA and requirements outlined in the March 27, 1980 Federal Register for submitting air-quality models to the EPA. Contents: Model Development and Use - Its Chronology and Reports; Monitoring Concorde EMissions; The Influence of Aircraft Operations on Air Quality at Airports; Simplex A - A simplified Atmospheric Dispersion Model for Airport Use -(User's Guide); Microcomputer Graphics in Atmospheric Dispersion Modeling; Pollution from Motor Vehicles and Aircraft at Stapleton International Airport (Abbreviated Report).« less

Emissions of indoor air pollutants from six user scenarios in a model room

NASA Astrophysics Data System (ADS)

Höllbacher, Eva; Ters, Thomas; Rieder-Gradinger, Cornelia; Srebotnik, Ewald

2017-02-01

In this study six common user scenarios putatively influencing indoor air quality were performed in a model room constructed according to the specifications of the European Reference Room given in the new horizontal prestandard prEN 16516 to gain further information about the influence of user activities on indoor air quality. These scenarios included the use of cleaning agent, an electric air freshener, an ethanol fireplace and cosmetics as well as cigarette smoking and peeling of oranges. Four common indoor air pollutants were monitored: volatile organic compounds (VOC), particulate matter (PM), carbonyl compounds and CO2. The development of all pollutants was determined during and after the test performance. For each measured pollutant, well-defined maximum values could be assigned to one or more of the individual user scenarios. The highest VOC concentration was measured during orange-peeling reaching a maximum value of 3547 μg m-3. Carbonyl compounds and PM were strongly elevated while cigarette smoking. Here, a maximum formaldehyde concentration of 76 μg m-3 and PM concentration of 378 μg m-3 were measured. CO2 was only slightly affected by most of the tests except the use of the ethanol fireplace where a maximum concentration of 1612 ppm was reached. Generally, the user scenarios resulted in a distinct increase of several indoor pollutants that usually decreased rapidly after the removal of the source.

[Comparison of level of satisfaction of users of home care: integrated model vs. dispensaries model].

PubMed

Gorina, Marta; Limonero, Joaquín T; Peñart, Xavier; Jiménez, Jordi; Gassó, Javier

2014-01-01

To determine the level of satisfaction of users that receive home health care through two different models of primary health care: integrated model and dispensaries model. cross-sectional, observational study. Two primary care centers in the province of Barcelona. The questionnaire was administered to 158 chronic patients over 65 years old, of whom 67 were receiving health care from the integrated model, and 91 from the dispensaries model. The Evaluation of Satisfaction with Home Health Care (SATISFAD12) questionnaire was, together with other complementary questions about service satisfaction of home health care, as well as social demographic questions (age, sex, disease, etc). The patients of the dispensaries model showed more satisfaction than the users receiving care from the integrated model. There was a greater healthcare continuity for those patients from the dispensaries model, and a lower percentage of hospitalizations during the last year. The satisfaction of the users from both models was not associated to gender, the health perception,or independence of the The user satisfaction rate of the home care by primary health care seems to depend of the typical characteristics of each organisational model. The dispensaries model shows a higher rate of satisfaction or perceived quality of care in all the aspects analysed. More studies are neede to extrapolate these results to other primary care centers belonging to other institutions. Copyright © 2013 Elsevier España, S.L. All rights reserved.

Internet VSMOKE: A user-oriented system for smoke management

Treesearch

James T. Paul; Alan Dozier; Daniel Chan

2007-01-01

The Georgia Forestry Commission has developed an Internet-based, user friendly version of a USDA Forest Service smoke dispersion model called “VSMOKE.” The program provides an easy to use method to quickly evaluate what areas will likely be impacted by smoke from a wild or prescribed fire. This is particularly important in assessing air quality, public safety and...

Examining the functionality of the DeLone and McLean information system success model as a framework for synthesis in nursing information and communication technology research.

PubMed

Booth, Richard G

2012-06-01

In this review, studies examining information and communication technology used by nurses in clinical practice were examined. Overall, a total of 39 studies were assessed spanning a time period from 1995 to 2008. The impacts of the various health information and communication technology evaluated by individual studies were synthesized using the DeLone and McLean's six-dimensional framework for evaluating information systems success (ie, System Quality, Information Quality, Service Quality, Use, User Satisfaction, and Net Benefits). Overall, the majority of researchers reported results related to the overall Net Benefits (positive, negative, and indifferent) of the health information and communication technology used by nurses. Attitudes and user satisfaction with technology were also commonly measured attributes. The current iteration of DeLone and McLean model is effective at synthesizing basic elements of health information and communication technology use by nurses. Regardless, the current model lacks the sociotechnical sensitivity to capture deeper nurse-technology relationalities. Limitations and recommendations are provided for researchers considering using the DeLone and McLean model for evaluating health information and communication technology used by nurses.

Progressive Learning of Topic Modeling Parameters: A Visual Analytics Framework.

PubMed

El-Assady, Mennatallah; Sevastjanova, Rita; Sperrle, Fabian; Keim, Daniel; Collins, Christopher

2018-01-01

Topic modeling algorithms are widely used to analyze the thematic composition of text corpora but remain difficult to interpret and adjust. Addressing these limitations, we present a modular visual analytics framework, tackling the understandability and adaptability of topic models through a user-driven reinforcement learning process which does not require a deep understanding of the underlying topic modeling algorithms. Given a document corpus, our approach initializes two algorithm configurations based on a parameter space analysis that enhances document separability. We abstract the model complexity in an interactive visual workspace for exploring the automatic matching results of two models, investigating topic summaries, analyzing parameter distributions, and reviewing documents. The main contribution of our work is an iterative decision-making technique in which users provide a document-based relevance feedback that allows the framework to converge to a user-endorsed topic distribution. We also report feedback from a two-stage study which shows that our technique results in topic model quality improvements on two independent measures.

Involving mental health service users in suicide-related research: a qualitative inquiry model.

PubMed

Lees, David; Procter, Nicholas; Fassett, Denise; Handley, Christine

2016-03-01

To describe the research model developed and successfully deployed as part of a multi-method qualitative study investigating suicidal service-users' experiences of mental health nursing care. Quality mental health care is essential to limiting the occurrence and burden of suicide, however there is a lack of relevant research informing practice in this context. Research utilising first-person accounts of suicidality is of particular importance to expanding the existing evidence base. However, conducting ethical research to support this imperative is challenging. The model discussed here illustrates specific and more generally applicable principles for qualitative research regarding sensitive topics and involving potentially vulnerable service-users. Researching into mental health service users with first-person experience of suicidality requires stakeholder and institutional support, researcher competency, and participant recruitment, consent, confidentiality, support and protection. Research with service users into their experiences of sensitive issues such as suicidality can result in rich and valuable data, and may also provide positive experiences of collaboration and inclusivity. If challenges are not met, objectification and marginalisation of service-users may be reinforced, and limitations in the evidence base and service provision may be perpetuated.

A case for user-generated sensor metadata

NASA Astrophysics Data System (ADS)

Nüst, Daniel

2015-04-01

Cheap and easy to use sensing technology and new developments in ICT towards a global network of sensors and actuators promise previously unthought of changes for our understanding of the environment. Large professional as well as amateur sensor networks exist, and they are used for specific yet diverse applications across domains such as hydrology, meteorology or early warning systems. However the impact this "abundance of sensors" had so far is somewhat disappointing. There is a gap between (community-driven) sensor networks that could provide very useful data and the users of the data. In our presentation, we argue this is due to a lack of metadata which allows determining the fitness of use of a dataset. Syntactic or semantic interoperability for sensor webs have made great progress and continue to be an active field of research, yet they often are quite complex, which is of course due to the complexity of the problem at hand. But still, we see the most generic information to determine fitness for use is a dataset's provenance, because it allows users to make up their own minds independently from existing classification schemes for data quality. In this work we will make the case how curated user-contributed metadata has the potential to improve this situation. This especially applies for scenarios in which an observed property is applicable in different domains, and for set-ups where the understanding about metadata concepts and (meta-)data quality differs between data provider and user. On the one hand a citizen does not understand the ISO provenance metadata. On the other hand a researcher might find issues in publicly accessible time series published by citizens, which the latter might not be aware of or care about. Because users will have to determine fitness for use for each application on their own anyway, we suggest an online collaboration platform for user-generated metadata based on an extremely simplified data model. In the most basic fashion, metadata generated by users can be boiled down to a basic property of the world wide web: many information items, such as news or blog posts, allow users to create comments and rate the content. Therefore we argue to focus a core data model on one text field for a textual comment, one optional numerical field for a rating, and a resolvable identifier for the dataset that is commented on. We present a conceptual framework that integrates user comments in existing standards and relevant applications of online sensor networks and discuss possible approaches, such as linked data, brokering, or standalone metadata portals. We relate this framework to existing work in user generated content, such as proprietary rating systems on commercial websites, microformats, the GeoViQua User Quality Model, the CHARMe annotations, or W3C Open Annotation. These systems are also explored for commonalities and based on their very useful concepts and ideas; we present an outline for future extensions of the minimal model. Building on this framework we present a concept how a simplistic comment-rating-system can be extended to capture provenance information for spatio-temporal observations in the sensor web, and how this framework can be evaluated.

Associated and mediating variables related to quality of life among service users with mental disorders.

PubMed

Fleury, Marie-Josée; Grenier, Guy; Bamvita, Jean-Marie

2018-02-01

This study aimed to identify variables associated with quality of life (QoL) and mediating variables among 338 service users with mental disorders in Quebec (Canada). Data were collected using nine standardized questionnaires and participant medical records. Quality of life was assessed with the Satisfaction with Life Domains Scale. Independent variables were organized into a six-block conceptual framework. Using structural equation modeling, associated and mediating variables related to QoL were identified. Lower seriousness of needs was the strongest variable associated with QoL, followed by recovery, greater service continuity, gender (male), adequacy of help received, not living alone, absence of substance use or mood disorders, and higher functional status, in that order. Recovery was the single mediating variable linking lower seriousness of needs, higher service continuity, and reduced alcohol use with QoL. Findings suggest that greater service continuity creates favorable conditions for recovery, reducing seriousness of needs and increasing QoL among service users. Lack of recovery-oriented services may affect QoL among alcohol users, as substance use disorders were associated directly and negatively with QoL. Decision makers and mental health professionals should promote service continuity, and closer collaboration between primary care and specialized services, while supporting recovery-oriented services that encourage service user involvement in their treatment and follow-up. Community-based organizations should aim to reduce the seriousness of needs particularly for female service users and those living alone.

Ranking online quality and reputation via the user activity

NASA Astrophysics Data System (ADS)

Liu, Xiao-Lu; Guo, Qiang; Hou, Lei; Cheng, Can; Liu, Jian-Guo

2015-10-01

How to design an accurate algorithm for ranking the object quality and user reputation is of importance for online rating systems. In this paper we present an improved iterative algorithm for online ranking object quality and user reputation in terms of the user degree (IRUA), where the user's reputation is measured by his/her rating vector, the corresponding objects' quality vector and the user degree. The experimental results for the empirical networks show that the AUC values of the IRUA algorithm can reach 0.9065 and 0.8705 in Movielens and Netflix data sets, respectively, which is better than the results generated by the traditional iterative ranking methods. Meanwhile, the results for the synthetic networks indicate that user degree should be considered in real rating systems due to users' rating behaviors. Moreover, we find that enhancing or reducing the influences of the large-degree users could produce more accurate reputation ranking lists.

Framework for power and activity factor allocation in a multiclass CDMA system

NASA Astrophysics Data System (ADS)

Wu, Xinzhou; Srikant, Rayadurgam

2001-07-01

We consider a multimedia CDMA uplink where there are multiple classes of users with different Quality-of-Service (QoS) requirements. Each user is modeled as an ON-OFF source, where in the ON state, the user transmits a fixed number of bits in each time slot and in the OFF state, the user is silent. The probability of being in the ON state, known as the activity factor, could be different for different users. Assuming a constant channel gain, we first characterize the set of transmit power levels, activity factors and number of users in each class that can be supported by a system with a given spreading gain under the constraint that each user's QoS requirement must be met. Using this characterization, we then present a utility function-based algorithm for choosing the activity factors of elastic users in the network.

Evolution properties of online user preference diversity

NASA Astrophysics Data System (ADS)

Guo, Qiang; Ji, Lei; Liu, Jian-Guo; Han, Jingti

2017-02-01

Detecting the evolution properties of online user preference diversity is of significance for deeply understanding online collective behaviors. In this paper, we empirically explore the evolution patterns of online user rating preference, where the preference diversity is measured by the variation coefficient of the user rating sequence. The statistical results for four real systems show that, for movies and reviews, the user rating preference would become diverse and then get centralized finally. By introducing the empirical variation coefficient, we present a Markov model, which could regenerate the evolution properties of two online systems regarding to the stable variation coefficients. In addition, we investigate the evolution of the correlation between the user ratings and the object qualities, and find that the correlation would keep increasing as the user degree increases. This work could be helpful for understanding the anchoring bias and memory effects of the online user collective behaviors.

User interface support

NASA Technical Reports Server (NTRS)

Lewis, Clayton; Wilde, Nick

1989-01-01

Space construction will require heavy investment in the development of a wide variety of user interfaces for the computer-based tools that will be involved at every stage of construction operations. Using today's technology, user interface development is very expensive for two reasons: (1) specialized and scarce programming skills are required to implement the necessary graphical representations and complex control regimes for high-quality interfaces; (2) iteration on prototypes is required to meet user and task requirements, since these are difficult to anticipate with current (and foreseeable) design knowledge. We are attacking this problem by building a user interface development tool based on extensions to the spreadsheet model of computation. The tool provides high-level support for graphical user interfaces and permits dynamic modification of interfaces, without requiring conventional programming concepts and skills.

Development and case study of a science-based software platform to support policy making on air quality.

PubMed

Zhu, Yun; Lao, Yanwen; Jang, Carey; Lin, Chen-Jen; Xing, Jia; Wang, Shuxiao; Fu, Joshua S; Deng, Shuang; Xie, Junping; Long, Shicheng

2015-01-01

This article describes the development and implementations of a novel software platform that supports real-time, science-based policy making on air quality through a user-friendly interface. The software, RSM-VAT, uses a response surface modeling (RSM) methodology and serves as a visualization and analysis tool (VAT) for three-dimensional air quality data obtained by atmospheric models. The software features a number of powerful and intuitive data visualization functions for illustrating the complex nonlinear relationship between emission reductions and air quality benefits. The case study of contiguous U.S. demonstrates that the enhanced RSM-VAT is capable of reproducing the air quality model results with Normalized Mean Bias <2% and assisting in air quality policy making in near real time. Copyright © 2014. Published by Elsevier B.V.

A User’s Guide for the Software Technology Economic Impact Model

DTIC Science & Technology

1991-10-01

Copy 16 oft22 oples U AD-A248 023 \\\\1\\\\\\i\\~\\1\\1\\\\1\\1\\11\\\\\\l~ IDA DOCUMENT D-971 E Tt USER’S GUIDE FOR THE SOFTWARE TECHNOLOGY ECONOMIC IMPACT MODEL I... studied , and they are released by the President of IDA. Group Reports Group Reports record the findings and results of IDA established working groups and...the senior individuals responsible for the project and others as selected by IDA to ensure their high quality and relevance to the problems studied

Ensemble Statistical Post-Processing of the National Air Quality Forecast Capability: Enhancing Ozone Forecasts in Baltimore, Maryland

NASA Technical Reports Server (NTRS)

Garner, Gregory G.; Thompson, Anne M.

2013-01-01

An ensemble statistical post-processor (ESP) is developed for the National Air Quality Forecast Capability (NAQFC) to address the unique challenges of forecasting surface ozone in Baltimore, MD. Air quality and meteorological data were collected from the eight monitors that constitute the Baltimore forecast region. These data were used to build the ESP using a moving-block bootstrap, regression tree models, and extreme-value theory. The ESP was evaluated using a 10-fold cross-validation to avoid evaluation with the same data used in the development process. Results indicate that the ESP is conditionally biased, likely due to slight overfitting while training the regression tree models. When viewed from the perspective of a decision-maker, the ESP provides a wealth of additional information previously not available through the NAQFC alone. The user is provided the freedom to tailor the forecast to the decision at hand by using decision-specific probability thresholds that define a forecast for an ozone exceedance. Taking advantage of the ESP, the user not only receives an increase in value over the NAQFC, but also receives value for An ensemble statistical post-processor (ESP) is developed for the National Air Quality Forecast Capability (NAQFC) to address the unique challenges of forecasting surface ozone in Baltimore, MD. Air quality and meteorological data were collected from the eight monitors that constitute the Baltimore forecast region. These data were used to build the ESP using a moving-block bootstrap, regression tree models, and extreme-value theory. The ESP was evaluated using a 10-fold cross-validation to avoid evaluation with the same data used in the development process. Results indicate that the ESP is conditionally biased, likely due to slight overfitting while training the regression tree models. When viewed from the perspective of a decision-maker, the ESP provides a wealth of additional information previously not available through the NAQFC alone. The user is provided the freedom to tailor the forecast to the decision at hand by using decision-specific probability thresholds that define a forecast for an ozone exceedance. Taking advantage of the ESP, the user not only receives an increase in value over the NAQFC, but also receives value for

User-Oriented Quality for OER: Understanding Teachers' Views on Re-Use, Quality, and Trust

ERIC Educational Resources Information Center

Clements, K. I.; Pawlowski, J. M.

2012-01-01

We analysed how teachers as users of open educational resources (OER) repositories act in the re-use process and how they perceive quality. Based on a quantitative empirical study, we also surveyed which quality requirements users have and how they would contribute to the quality process. Trust in resources, organizations, and technologies seem to…

Service quality of Early Childhood Education web portals in Finnish municipalities

NASA Astrophysics Data System (ADS)

Koskivaara, Eija; Pihlaja, Päivi

Increasing number of governmental organizations have transformed material on their web sites as a way of providing users with information about their products and services. In this paper, we apply Yang et al (2005) instrument for analyzing municipal early childhood education (ECE) web sites in Finland. The objective of the study was to find out the quality of ECE web portals as well as to give hints to improve their value from users' point of view. In general the five dimensions, usability, usefulness of content, adequacy of information, accessibility, and interaction, of the Yang et al model seems to be applicable also in the early childhood education environment.

Molray--a web interface between O and the POV-Ray ray tracer.

PubMed

Harris, M; Jones, T A

2001-08-01

A publicly available web-based interface is presented for producing high-quality ray-traced images and movies from the molecular-modelling program O [Jones et al. (1991), Acta Cryst. A47, 110-119]. The interface allows the user to select O-plot files and set parameters to create standard input files for the popular ray-tracing renderer POV-Ray, which can then produce publication-quality still images or simple movies. To ensure ease of use, we have made this service available to the O user community via the World Wide Web. The public Molray server is available at http://xray.bmc.uu.se/molray.

The use of data from national and other large-scale user experience surveys in local quality work: a systematic review.

PubMed

Haugum, Mona; Danielsen, Kirsten; Iversen, Hilde Hestad; Bjertnaes, Oyvind

2014-12-01

An important goal for national and large-scale surveys of user experiences is quality improvement. However, large-scale surveys are normally conducted by a professional external surveyor, creating an institutionalized division between the measurement of user experiences and the quality work that is performed locally. The aim of this study was to identify and describe scientific studies related to the use of national and large-scale surveys of user experiences in local quality work. Ovid EMBASE, Ovid MEDLINE, Ovid PsycINFO and the Cochrane Database of Systematic Reviews. Scientific publications about user experiences and satisfaction about the extent to which data from national and other large-scale user experience surveys are used for local quality work in the health services. Themes of interest were identified and a narrative analysis was undertaken. Thirteen publications were included, all differed substantially in several characteristics. The results show that large-scale surveys of user experiences are used in local quality work. The types of follow-up activity varied considerably from conducting a follow-up analysis of user experience survey data to information sharing and more-systematic efforts to use the data as a basis for improving the quality of care. This review shows that large-scale surveys of user experiences are used in local quality work. However, there is a need for more, better and standardized research in this field. The considerable variation in follow-up activities points to the need for systematic guidance on how to use data in local quality work. © The Author 2014. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

Optimization Model for Web Based Multimodal Interactive Simulations.

PubMed

Halic, Tansel; Ahn, Woojin; De, Suvranu

2015-07-15

This paper presents a technique for optimizing the performance of web based multimodal interactive simulations. For such applications where visual quality and the performance of simulations directly influence user experience, overloading of hardware resources may result in unsatisfactory reduction in the quality of the simulation and user satisfaction. However, optimization of simulation performance on individual hardware platforms is not practical. Hence, we present a mixed integer programming model to optimize the performance of graphical rendering and simulation performance while satisfying application specific constraints. Our approach includes three distinct phases: identification, optimization and update . In the identification phase, the computing and rendering capabilities of the client device are evaluated using an exploratory proxy code. This data is utilized in conjunction with user specified design requirements in the optimization phase to ensure best possible computational resource allocation. The optimum solution is used for rendering (e.g. texture size, canvas resolution) and simulation parameters (e.g. simulation domain) in the update phase. Test results are presented on multiple hardware platforms with diverse computing and graphics capabilities to demonstrate the effectiveness of our approach.

Optimization Model for Web Based Multimodal Interactive Simulations

PubMed Central

Halic, Tansel; Ahn, Woojin; De, Suvranu

2015-01-01

This paper presents a technique for optimizing the performance of web based multimodal interactive simulations. For such applications where visual quality and the performance of simulations directly influence user experience, overloading of hardware resources may result in unsatisfactory reduction in the quality of the simulation and user satisfaction. However, optimization of simulation performance on individual hardware platforms is not practical. Hence, we present a mixed integer programming model to optimize the performance of graphical rendering and simulation performance while satisfying application specific constraints. Our approach includes three distinct phases: identification, optimization and update. In the identification phase, the computing and rendering capabilities of the client device are evaluated using an exploratory proxy code. This data is utilized in conjunction with user specified design requirements in the optimization phase to ensure best possible computational resource allocation. The optimum solution is used for rendering (e.g. texture size, canvas resolution) and simulation parameters (e.g. simulation domain) in the update phase. Test results are presented on multiple hardware platforms with diverse computing and graphics capabilities to demonstrate the effectiveness of our approach. PMID:26085713

Irrigation Dynamics and Tactics - Developing a Sustainable and Profitable Irrigation Strategy for Agricultural Areas

NASA Astrophysics Data System (ADS)

Van Opstal, J.; Neale, C. M. U.; Lecina, S.

2014-12-01

Irrigation management is a dynamic process that adapts according to weather conditions and water availability, as well as socio-economic influences. The goal of water users is to adapt their management to achieve maximum profits. However, these decisions should take into account the environmental impact on the surroundings. Agricultural irrigation systems need to be viewed as a system that is an integral part of a watershed. Therefore changes in the infrastructure, operation and management of an irrigated area, has an impact on the water quantity and quality available for other water users. A strategy can be developed for decision-makers using an irrigation system modelling tool. Such a tool can simulate the impact of the infrastructure, operation and management of an irrigation area on its hydrology and agricultural productivity. This combination of factors is successfully simulated with the Ador model, which is able to reproduce on-farm irrigation and water delivery by a canal system. Model simulations for this study are supported with spatial analysis tools using GIS and remote sensing. Continuous measurements of drainage water will be added to indicate the water quality aspects. The Bear River Canal Company located in Northern Utah (U.S.A.) is used as a case study for this research. The irrigation area encompasses 26,000 ha and grows mainly alfalfa, grains, corn and onions. The model allows the simulation of different strategies related to water delivery, on-farm water use, crop rotations, and reservoirs and networks capacities under different weather and water availability conditions. Such changes in the irrigation area will have consequences for farmers in the study area regarding crop production, and for downstream users concerning both the quantity and quality of outflows. The findings from this study give insight to decision-makers and water users for changing irrigation water delivery strategies to improve the sustainability and profitability of agriculture in the future.

Assessing the Quality of Academic Libraries on the Web: The Development and Testing of Criteria.

ERIC Educational Resources Information Center

Chao, Hungyune

2002-01-01

This study develops and tests an instrument useful for evaluating the quality of academic library Web sites. Discusses criteria for print materials and human-computer interfaces; user-based perspectives; the use of factor analysis; a survey of library experts; testing reliability through analysis of variance; and regression models. (Contains 53…

Dynamic Fuzzy Logic-Based Quality of Interaction within Blended-Learning: The Rare and Contemporary Dance Cases

ERIC Educational Resources Information Center

Dias, Sofia B.; Diniz, José A.; Hadjileontiadis, Leontios J.

2014-01-01

The combination of the process of pedagogical planning within the Blended (b-) learning environment with the users' quality of interaction ("QoI") with the Learning Management System (LMS) is explored here. The required "QoI" (both for professors and students) is estimated by adopting a fuzzy logic-based modeling approach,…

Structure of Perceptions of Service Quality in Libraries: A LibQUAL+ Study.

ERIC Educational Resources Information Center

Thompson, Bruce; Cook, Colleen; Heath, Fred

2003-01-01

Used confirmatory factor analysis to evaluate the score integrity of LibQUALl+, an instrument to measure perceptions of library service quality. Results for 60,027 graduate and undergraduate students suggest that the model implied by LibQUAL is reasonable and invariant across independent samples and fits all three major subgroups of library users.…

Modeling integrated water user decisions in intermittent supply systems

NASA Astrophysics Data System (ADS)

Rosenberg, David E.; Tarawneh, Tarek; Abdel-Khaleq, Rania; Lund, Jay R.

2007-07-01

We apply systems analysis to estimate household water use in an intermittent supply system considering numerous interdependent water user behaviors. Some 39 household actions include conservation; improving local storage or water quality; and accessing sources having variable costs, availabilities, reliabilities, and qualities. A stochastic optimization program with recourse decisions identifies the infrastructure investments and short-term coping actions a customer can adopt to cost-effectively respond to a probability distribution of piped water availability. Monte Carlo simulations show effects for a population of customers. Model calibration reproduces the distribution of billed residential water use in Amman, Jordan. Parametric analyses suggest economic and demand responses to increased availability and alternative pricing. It also suggests potential market penetration for conservation actions, associated water savings, and subsidies to entice further adoption. We discuss new insights to size, target, and finance conservation.

XAL Application Framework and Bricks GUI Builder

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pelaia II, Tom

2007-01-01

The XAL [1] Application Framework is a framework for rapidly developing document based Java applications with a common look and feel along with many built-in user interface behaviors. The Bricks GUI builder consists of a modern application and framework for rapidly building user interfaces in support of true Model-View-Controller (MVC) compliant Java applications. Bricks and the XAL Application Framework allow developers to rapidly create quality applications.

Bayesian deconvolution and quantification of metabolites in complex 1D NMR spectra using BATMAN.

PubMed

Hao, Jie; Liebeke, Manuel; Astle, William; De Iorio, Maria; Bundy, Jacob G; Ebbels, Timothy M D

2014-01-01

Data processing for 1D NMR spectra is a key bottleneck for metabolomic and other complex-mixture studies, particularly where quantitative data on individual metabolites are required. We present a protocol for automated metabolite deconvolution and quantification from complex NMR spectra by using the Bayesian automated metabolite analyzer for NMR (BATMAN) R package. BATMAN models resonances on the basis of a user-controllable set of templates, each of which specifies the chemical shifts, J-couplings and relative peak intensities for a single metabolite. Peaks are allowed to shift position slightly between spectra, and peak widths are allowed to vary by user-specified amounts. NMR signals not captured by the templates are modeled non-parametrically by using wavelets. The protocol covers setting up user template libraries, optimizing algorithmic input parameters, improving prior information on peak positions, quality control and evaluation of outputs. The outputs include relative concentration estimates for named metabolites together with associated Bayesian uncertainty estimates, as well as the fit of the remainder of the spectrum using wavelets. Graphical diagnostics allow the user to examine the quality of the fit for multiple spectra simultaneously. This approach offers a workflow to analyze large numbers of spectra and is expected to be useful in a wide range of metabolomics studies.

Integration of external metadata into the Earth System Grid Federation (ESGF)

NASA Astrophysics Data System (ADS)

Berger, Katharina; Levavasseur, Guillaume; Stockhause, Martina; Lautenschlager, Michael

2015-04-01

International projects with high volume data usually disseminate their data in a federated data infrastructure, e.g.~the Earth System Grid Federation (ESGF). The ESGF aims to make the geographically distributed data seamlessly discoverable and accessible. Additional data-related information is currently collected and stored in separate repositories by each data provider. This scattered and useful information is not or only partly available for ESGF users. Examples for such additional information systems are ES-DOC/metafor for model and simulation information, IPSL's versioning information, CHARMe for user annotations, DKRZ's quality information and data citation information. The ESGF Quality Control working team (esgf-qcwt) aims to integrate these valuable pieces of additional information into the ESGF in order to make them available to users and data archive managers by (i) integrating external information into ESGF portal, (ii) integrating links to external information objects into the ESGF metadata index, e.g. by the use of PIDs (Persistent IDentifiers), and (iii) automating the collection of external information during the ESGF data publication process. For the sixth phase of CMIP (Coupled Model Intercomparison Project), the ESGF metadata index is to be enriched by additional information on data citation, file version, etc. This information will support users directly and can be automatically exploited by higher level services (human and machine readability).

Motivating medical information system performance by system quality, service quality, and job satisfaction for evidence-based practice.

PubMed

Chang, Ching-Sheng; Chen, Su-Yueh; Lan, Yi-Ting

2012-11-21

No previous studies have addressed the integrated relationships among system quality, service quality, job satisfaction, and system performance; this study attempts to bridge such a gap with evidence-based practice study. The convenience sampling method was applied to the information system users of three hospitals in southern Taiwan. A total of 500 copies of questionnaires were distributed, and 283 returned copies were valid, suggesting a valid response rate of 56.6%. SPSS 17.0 and AMOS 17.0 (structural equation modeling) statistical software packages were used for data analysis and processing. The findings are as follows: System quality has a positive influence on service quality (γ11= 0.55), job satisfaction (γ21= 0.32), and system performance (γ31= 0.47). Service quality (β31= 0.38) and job satisfaction (β32= 0.46) will positively influence system performance. It is thus recommended that the information office of hospitals and developers take enhancement of service quality and user satisfaction into consideration in addition to placing b on system quality and information quality when designing, developing, or purchasing an information system, in order to improve benefits and gain more achievements generated by hospital information systems.

Simplified Metadata Curation via the Metadata Management Tool

NASA Astrophysics Data System (ADS)

Shum, D.; Pilone, D.

2015-12-01

The Metadata Management Tool (MMT) is the newest capability developed as part of NASA Earth Observing System Data and Information System's (EOSDIS) efforts to simplify metadata creation and improve metadata quality. The MMT was developed via an agile methodology, taking into account inputs from GCMD's science coordinators and other end-users. In its initial release, the MMT uses the Unified Metadata Model for Collections (UMM-C) to allow metadata providers to easily create and update collection records in the ISO-19115 format. Through a simplified UI experience, metadata curators can create and edit collections without full knowledge of the NASA Best Practices implementation of ISO-19115 format, while still generating compliant metadata. More experienced users are also able to access raw metadata to build more complex records as needed. In future releases, the MMT will build upon recent work done in the community to assess metadata quality and compliance with a variety of standards through application of metadata rubrics. The tool will provide users with clear guidance as to how to easily change their metadata in order to improve their quality and compliance. Through these features, the MMT allows data providers to create and maintain compliant and high quality metadata in a short amount of time.

Demand assessment and price-elasticity estimation of quality-improved primary health care in Palestine: a contribution from the contingent valuation method.

PubMed

Mataria, Awad; Luchini, Stéphane; Daoud, Yousef; Moatti, Jean-Paul

2007-10-01

This paper proposes a new methodology to assess demand and price-elasticity for health care, based on patients' stated willingness to pay (WTP) values for certain aspects of health care quality improvements. A conceptual analysis of how respondents consider contingent valuation (CV) questions allowed us to specify a probability density function of stated WTP values, and consequently, to model a demand function for quality-improved health care, using a parametric survival approach. The model was empirically estimated using a CV study intended to assess patients' values for improving the quality of primary health care (PHC) services in Palestine. A random sample of 499 individuals was interviewed following medical consultation in four PHC centers. Quality was assessed using a multi-attribute approach; and respondents valued seven specific quality improvements using a decomposed valuation scenario and a payment card elicitation technique. Our results suggest an inelastic demand at low user fees levels, and when the price-increase is accompanied with substantial quality-improvements. Nevertheless, demand becomes more and more elastic if user fees continue to rise. On the other hand, patients' reactions to price-increase turn out to depend on their level of income. Our results can be used to design successful health care financing strategies that include a consideration of patients' preferences and financial capacities. John Wiley & Sons, Ltd.

Online chemical modeling environment (OCHEM): web platform for data storage, model development and publishing of chemical information

NASA Astrophysics Data System (ADS)

Sushko, Iurii; Novotarskyi, Sergii; Körner, Robert; Pandey, Anil Kumar; Rupp, Matthias; Teetz, Wolfram; Brandmaier, Stefan; Abdelaziz, Ahmed; Prokopenko, Volodymyr V.; Tanchuk, Vsevolod Y.; Todeschini, Roberto; Varnek, Alexandre; Marcou, Gilles; Ertl, Peter; Potemkin, Vladimir; Grishina, Maria; Gasteiger, Johann; Schwab, Christof; Baskin, Igor I.; Palyulin, Vladimir A.; Radchenko, Eugene V.; Welsh, William J.; Kholodovych, Vladyslav; Chekmarev, Dmitriy; Cherkasov, Artem; Aires-de-Sousa, Joao; Zhang, Qing-You; Bender, Andreas; Nigsch, Florian; Patiny, Luc; Williams, Antony; Tkachenko, Valery; Tetko, Igor V.

2011-06-01

The Online Chemical Modeling Environment is a web-based platform that aims to automate and simplify the typical steps required for QSAR modeling. The platform consists of two major subsystems: the database of experimental measurements and the modeling framework. A user-contributed database contains a set of tools for easy input, search and modification of thousands of records. The OCHEM database is based on the wiki principle and focuses primarily on the quality and verifiability of the data. The database is tightly integrated with the modeling framework, which supports all the steps required to create a predictive model: data search, calculation and selection of a vast variety of molecular descriptors, application of machine learning methods, validation, analysis of the model and assessment of the applicability domain. As compared to other similar systems, OCHEM is not intended to re-implement the existing tools or models but rather to invite the original authors to contribute their results, make them publicly available, share them with other users and to become members of the growing research community. Our intention is to make OCHEM a widely used platform to perform the QSPR/QSAR studies online and share it with other users on the Web. The ultimate goal of OCHEM is collecting all possible chemoinformatics tools within one simple, reliable and user-friendly resource. The OCHEM is free for web users and it is available online at http://www.ochem.eu.

Open Source Molecular Modeling

PubMed Central

Pirhadi, Somayeh; Sunseri, Jocelyn; Koes, David Ryan

2016-01-01

The success of molecular modeling and computational chemistry efforts are, by definition, dependent on quality software applications. Open source software development provides many advantages to users of modeling applications, not the least of which is that the software is free and completely extendable. In this review we categorize, enumerate, and describe available open source software packages for molecular modeling and computational chemistry. PMID:27631126

An expert system for water quality modelling.

PubMed

Booty, W G; Lam, D C; Bobba, A G; Wong, I; Kay, D; Kerby, J P; Bowen, G S

1992-12-01

The RAISON-micro (Regional Analysis by Intelligent System ON a micro-computer) expert system is being used to predict the effects of mine effluents on receiving waters in Ontario. The potential of this system to assist regulatory agencies and mining industries to define more acceptable effluent limits was shown in an initial study. This system has been further developed so that the expert system helps the model user choose the most appropriate model for a particular application from a hierarchy of models. The system currently contains seven models which range from steady state to time dependent models, for both conservative and nonconservative substances in rivers and lakes. The menu driven expert system prompts the model user for information such as the nature of the receiving water system, the type of effluent being considered, and the range of background data available for use as input to the models. The system can also be used to determine the nature of the environmental conditions at the site which are not available in the textual information database, such as the components of river flow. Applications of the water quality expert system are presented for representative mine sites in the Timmins area of Ontario.

Community LINE Source Model (C-LINE)

EPA Science Inventory

This presentation provides an introduction for the live demo and explains the purpose of C-LINE and its key features. C-LINE is a web-based model designed to inform the community user of local air quality impacts due to mobile-sources in their region of interest using a simplifie...

An Integrated Decision Support System for Water Quality Management of Songhua River Basin

NASA Astrophysics Data System (ADS)

Zhang, Haiping; Yin, Qiuxiao; Chen, Ling

2010-11-01

In the Songhua River Basin of China, many water resource and water environment conflicts interact. A Decision Support System (DSS) for the water quality management has been established for the Basin. The System is featured by the incorporation of a numerical water quality model system into a conventional water quality management system which usually consists of geographic information system (GIS), WebGIS technology, database system and network technology. The model system is built based on DHI MIKE software comprising of a basin rainfall-runoff module, a basin pollution load evaluation module, a river hydrodynamic module and a river water quality module. The DSS provides a friendly graphical user interface that enables the rapid and transparent calculation of various water quality management scenarios, and also enables the convenient access and interpretation of the modeling results to assist the decision-making.

A Network and Visual Quality Aware N-Screen Content Recommender System Using Joint Matrix Factorization

PubMed Central

Ullah, Farman; Sarwar, Ghulam; Lee, Sungchang

2014-01-01

We propose a network and visual quality aware N-Screen content recommender system. N-Screen provides more ways than ever before to access multimedia content through multiple devices and heterogeneous access networks. The heterogeneity of devices and access networks present new questions of QoS (quality of service) in the realm of user experience with content. We propose, a recommender system that ensures a better visual quality on user's N-screen devices and the efficient utilization of available access network bandwidth with user preferences. The proposed system estimates the available bandwidth and visual quality on users N-Screen devices and integrates it with users preferences and contents genre information to personalize his N-Screen content. The objective is to recommend content that the user's N-Screen device and access network are capable of displaying and streaming with the user preferences that have not been supported in existing systems. Furthermore, we suggest a joint matrix factorization approach to jointly factorize the users rating matrix with the users N-Screen device similarity and program genres similarity. Finally, the experimental results show that we also enhance the prediction and recommendation accuracy, sparsity, and cold start issues. PMID:24982999

Domestic solid fuel combustion in an adult population in Nigeria: A cross sectional analysis of association with respiratory symptoms, quality of life and lung function.

PubMed

Obaseki, Daniel O; Awopeju, Olayemi F; Awokola, Babatunde I; Adeniyi, Bamidele O; Adefuye, Bolanle O; Ozoh, Obianuju B; Isiguzo, Godsent C; Amusa, Ganiyu A; Adewole, Olufemi O; Erhabor, Gregory E

2017-09-01

We examined the association of respiratory symptoms, health status, and lung function with the use of solid fuel (wood, charcoal, coal or crop residue) for cooking or heating in a predominantly non-smoking population. Using the protocol of the Burden of Obstructive Lung Diseases (BOLD) initiative, we collected representative population data using questionnaires and spirometry tests. We categorized solid fuel use into 'never user', 'ex user' and 'current user' based on responses to the survey. We developed regression models to evaluate the relation between use of solid fuel and the prevalence of respiratory symptoms, quality of life and lung function adjusting for confounding variables. Out of 1147 respondents with complete information on domestic fuel type, 33% were 'never-users', 19% were 'ex-users' while 48% reported current use of solid fuel for domestic cooking and/or indoor heating. Compared with never-users, current solid fuel users were more likely to report cough (OR: 1.7, 95% CI: 1.0, 2.9), cough or phlegm (OR: 1.6, 95% CI: 1.0, 2.5) and the association was stronger among women (OR: 3.0, 95% CI: 1.3, 7.1 and OR: 2.3, 95% CI: 1.1, 5.2, respectively). Current solid fuel users also had lower mental health status (coefficient: ?1.5, 95% CI: ?2.8, - 0.2) compared with the group of never-users. Current or previous domestic use of solid fuels for cooking or heating was not associated with higher prevalence of chronic airflow obstruction (FEV 1 /FVC < LLN). Using solid fuel for domestic cooking or heating was associated with a higher risk of cough or phlegm and a lower mental quality of life. However we found no significant effect in the prevalence of chronic airflow obstruction in Ife, Nigeria. Copyright © 2017. Published by Elsevier Ltd.

Sleep impairment in ecstasy/polydrug and cannabis-only users.

PubMed

Fisk, John E; Montgomery, Catharine

2009-01-01

The present study investigated aspects of sleep quality in ecstasy and cannabis users. Two-hundred and twenty seven participants (117 ecstasy/polydrug users, 53 cannabis users and 57 drug naive participants) took part. The participants completed measures of daytime sleepiness, and indicators of sleep quality. The results demonstrated that ecstasy/polydrug users viewed themselves as being more evening types and having poorer sleep quality than cannabis users and drug naive participants. They were also more likely to have missed a night's sleep. The reported differences in sleep type may reflect ecstasy-related serotonergic dysfunction resulting in problems with shifting circadian rhythms.

The Effects of Perceived Quality on Behavioral Economic Demand for Marijuana: A Web-Based Experiment

PubMed Central

Vincent, Paula C.; Collins, R. Lorraine; Liu, Liu; Yu, Jihnhee; De Leo, Joseph A.; Earleywine, Mitch

2016-01-01

Background Given the growing legalization of recreational marijuana use and related increase in its prevalence in the United States, it is important to understand marijuana's appeal. We used a behavioral economic (BE) approach to examine whether the reinforcing properties of marijuana, including “demand” for marijuana, varied as a function of its perceived quality. Methods Using an innovative, Web-based marijuana purchase task (MPT), a sample of 683 young-adult recreational marijuana users made hypothetical purchases of marijuana across three qualities (low, mid and high grade) at nine escalating prices per joint, ranging from $0/free to $20. Results We used nonlinear mixed effects modeling to conduct demand curve analyses, which produced separate demand indices (e.g., Pmax, elasticity) for each grade of marijuana. Consistent with previous research, as the price of marijuana increased, marijuana users reduced their purchasing. Demand also was sensitive to quality, with users willing to pay more for higher quality/grade marijuana. In regression analyses, demand indices accounted for significant variance in typical marijuana use. Conclusions This study illustrates the value of applying BE theory to young adult marijuana use. It extends past research by examining how perceived quality affects demand for marijuana and provides support for the validity of a Web-based MPT to examine the appeal of marijuana. Our results have implications for policies to regulate marijuana use, including taxation based on the quality of different marijuana products. PMID:27951424

The effects of perceived quality on behavioral economic demand for marijuana: A web-based experiment.

PubMed

Vincent, Paula C; Collins, R Lorraine; Liu, Liu; Yu, Jihnhee; De Leo, Joseph A; Earleywine, Mitch

2017-01-01

Given the growing legalization of recreational marijuana use and related increase in its prevalence in the United States, it is important to understand marijuana's appeal. We used a behavioral economic (BE) approach to examine whether the reinforcing properties of marijuana, including "demand" for marijuana, varied as a function of its perceived quality. Using an innovative, Web-based marijuana purchase task (MPT), a sample of 683 young-adult recreational marijuana users made hypothetical purchases of marijuana across three qualities (low, mid and high grade) at nine escalating prices per joint, ranging from $0/free to $20. We used nonlinear mixed effects modeling to conduct demand curve analyses, which produced separate demand indices (e.g., P max , elasticity) for each grade of marijuana. Consistent with previous research, as the price of marijuana increased, marijuana users reduced their purchasing. Demand also was sensitive to quality, with users willing to pay more for higher quality/grade marijuana. In regression analyses, demand indices accounted for significant variance in typical marijuana use. This study illustrates the value of applying BE theory to young adult marijuana use. It extends past research by examining how perceived quality affects demand for marijuana and provides support for the validity of a Web-based MPT to examine the appeal of marijuana. Our results have implications for policies to regulate marijuana use, including taxation based on the quality of different marijuana products. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

An eHealth Project on Invasive Pneumococcal Disease: Comprehensive Evaluation of a Promotional Campaign

PubMed Central

Gasparini, Roberto; Bonanni, Paolo; Icardi, Giancarlo; Amicizia, Daniela; Arata, Lucia; Carozzo, Stefano; Signori, Alessio; Bechini, Angela; Boccalini, Sara

2016-01-01

Background The recently launched Pneumo Rischio eHealth project, which consists of an app, a website, and social networking activity, is aimed at increasing public awareness of invasive pneumococcal disease (IPD). The launch of this project was prompted by the inadequate awareness of IPD among both laypeople and health care workers, the heavy socioeconomic burden of IPD, and the far from optimal vaccination coverage in Italy, despite the availability of safe and effective vaccines. Objective The objectives of our study were to analyze trends in Pneumo Rischio usage before and after a promotional campaign, to characterize its end users, and to assess its user-rated quality. Methods At 7 months after launching Pneumo Rischio, we established a 4-month marketing campaign to promote the project. This intervention used various approaches and channels, including both traditional and digital marketing strategies. To highlight usage trends, we used different techniques of time series analysis and modeling, including a modified Mann-Kendall test, change-point detection, and segmented negative binomial regression of interrupted time series. Users were characterized in terms of demographics and IPD risk categories. Customer-rated quality was evaluated by means of a standardized tool in a sample of app users. Results Over 1 year, the app was accessed by 9295 users and the website was accessed by 143,993 users, while the project’s Facebook page had 1216 fans. The promotional intervention was highly effective in increasing the daily number of users. In particular, the Mann-Kendall trend test revealed a significant (P ≤.01) increasing trend in both app and website users, while change-point detection analysis showed that the first significant change corresponded to the start of the promotional campaign. Regression analysis showed a significant immediate effect of the intervention, with a mean increase in daily numbers of users of 1562% (95% CI 456%-4870%) for the app and 620% (95% CI 176%-1777%) for the website. Similarly, the postintervention daily trend in the number of users was positive, with a relative increase of 0.9% (95% CI 0.0%-1.8%) for the app and 1.4% (95% CI 0.7%-2.1%) for the website. Demographics differed between app and website users and Facebook fans. A total of 69.15% (10,793/15,608) of users could be defined as being at risk of IPD, while 4729 users expressed intentions to ask their doctor for further information on IPD. The mean app quality score assigned by end users was approximately 79.5% (397/500). Conclusions Despite its specific topic, Pneumo Rischio was accessed by a considerable number of users, who ranked it as a high-quality project. In order to reach their target populations, however, such projects should be promoted. PMID:27913372

Quality of service provision assessment in the healthcare information and telecommunications infrastructures.

PubMed

Babulak, Eduard

2006-01-01

The continuous increase in the complexity and the heterogeneity of corporate and healthcare telecommunications infrastructures will require new assessment methods of quality of service (QoS) provision that are capable of addressing all engineering and social issues with much faster speeds. Speed and accessibility to any information at any time from anywhere will create global communications infrastructures with great performance bottlenecks that may put in danger human lives, power supplies, national economy and security. Regardless of the technology supporting the information flows, the final verdict on the QoS is made by the end user. The users' perception of telecommunications' network infrastructure QoS provision is critical to the successful business management operation of any organization. As a result, it is essential to assess the QoS Provision in the light of user's perception. This article presents a cost effective methodology to assess the user's perception of quality of service provision utilizing the existing Staffordshire University Network (SUN) by adding a component of measurement to the existing model presented by Walker. This paper presents the real examples of CISCO Networking Solutions for Health Care givers and offers a cost effective approach to assess the QoS provision within the campus network, which could be easily adapted to any health care organization or campus network in the world.

Measuring mobile patient safety information system success: an empirical study.

PubMed

Jen, Wen-Yuan; Chao, Chia-Cheng

2008-10-01

The Health Risk Reminders and Surveillance (HRRS) system was designed to deliver critical abnormal test results of severely ill patients from Laboratory, Radiology, and Pathology departments to physicians within 5 min using cell phone text messages. This paper explores the success of the HRRS system. This study employed an augmented version of the DeLone and McLean IS success model. Seven variables (system quality, information quality, system use, user satisfaction, mobile healthcare anxiety, impact on the individual and impact on the organization) were used to evaluate the success of the HRRS system. The interrelationships between the seven variables were hypothesized and the hypotheses were empirically tested. The results indicate that the information quality of the HRRS system is positively associated with both system use and user satisfaction. In addition, system use is positively associated with user satisfaction, which is also positively associated with mobile healthcare anxiety. Moreover, results indicate that impact on the individual is positively associated with both user satisfaction and mobile healthcare anxiety. Finally, the impact of the organization is positively associated with impact on the individual. The results of the study provide an expanded understanding of the factors that contribute to mobile patient safety information system (IS) success. Implications of the relationship between system use and physician mobile healthcare anxiety are discussed.

Introducing heterogeneous users and vehicles into models and algorithms for the dial-a-ride problem.

PubMed

Parragh, Sophie N

2011-08-01

Dial-a-ride problems deal with the transportation of people between pickup and delivery locations. Given the fact that people are subject to transportation, constraints related to quality of service are usually present, such as time windows and maximum user ride time limits. In many real world applications, different types of users exist. In the field of patient and disabled people transportation, up to four different transportation modes can be distinguished. In this article we consider staff seats, patient seats, stretchers and wheelchair places. Furthermore, most companies involved in the transportation of the disabled or ill dispose of different types of vehicles. We introduce both aspects into state-of-the-art formulations and branch-and-cut algorithms for the standard dial-a-ride problem. Also a recent metaheuristic method is adapted to this new problem. In addition, a further service quality related issue is analyzed: vehicle waiting time with passengers aboard. Instances with up to 40 requests are solved to optimality. High quality solutions are obtained with the heuristic method.

User involvement in the implementation of clinical guidelines for common mental health disorders: a review and compilation of strategies and resources.

PubMed

Moreno, Eliana M; Moriana, Juan Antonio

2016-08-09

There is now broad consensus regarding the importance of involving users in the process of implementing guidelines. Few studies, however, have addressed this issue, let alone the implementation of guidelines for common mental health disorders. The aim of this study is to compile and describe implementation strategies and resources related to common clinical mental health disorders targeted at service users. The literature was reviewed and resources for the implementation of clinical guidelines were compiled using the PRISMA model. A mixed qualitative and quantitative analysis was performed based on a series of categories developed ad hoc. A total of 263 items were included in the preliminary analysis and 64 implementation resources aimed at users were analysed in depth. A wide variety of types, sources and formats were identified, including guides (40%), websites (29%), videos and leaflets, as well as instruments for the implementation of strategies regarding information and education (64%), self-care, or users' assessment of service quality. The results reveal the need to establish clear criteria for assessing the quality of implementation materials in general and standardising systems to classify user-targeted strategies. The compilation and description of key elements of strategies and resources for users can be of interest in designing materials and specific actions for this target audience, as well as improving the implementation of clinical guidelines.

Re-conceiving building design quality: A review of building users in their social context.

PubMed

Watson, Kelly J; Evans, James; Karvonen, Andrew; Whitley, Tim

2016-05-01

Considerable overlap exists between post-occupancy research evaluating building design quality and the concept of 'social value', popularised by its recent application to issues of the public realm. To outline this potential research agenda, the paper reviews design quality research on buildings in relation to users and their social context where the term 'social context' refers to building user group dynamics, a combination of organisational cultures, management strategies, and social norms and practices. The review is conducted across five key building types, namely housing, workplaces, healthcare, education, and the retail/service sector. Research commonalities and gaps are identified in order to build a more comprehensive picture of the design quality literature and its handling of users in their social context. The key findings concerning each building type are presented visually. It is concluded that the design quality field comprises a patchwork of relatively isolated studies of various building types, with significant potential for theoretical and empirical development through interdisciplinary collaboration. Users tend to be conceived as anonymous and autonomous individuals with little analysis of user identity or interaction. Further, the contextual impact of user group dynamics on the relationship between building design and building user is rarely addressed in the literature. Producing a more nuanced understanding of users in situ is proposed as an important area for future design quality research.

Re-conceiving building design quality: A review of building users in their social context

PubMed Central

Evans, James; Karvonen, Andrew; Whitley, Tim

2014-01-01

Considerable overlap exists between post-occupancy research evaluating building design quality and the concept of ‘social value’, popularised by its recent application to issues of the public realm. To outline this potential research agenda, the paper reviews design quality research on buildings in relation to users and their social context where the term ‘social context’ refers to building user group dynamics, a combination of organisational cultures, management strategies, and social norms and practices. The review is conducted across five key building types, namely housing, workplaces, healthcare, education, and the retail/service sector. Research commonalities and gaps are identified in order to build a more comprehensive picture of the design quality literature and its handling of users in their social context. The key findings concerning each building type are presented visually. It is concluded that the design quality field comprises a patchwork of relatively isolated studies of various building types, with significant potential for theoretical and empirical development through interdisciplinary collaboration. Users tend to be conceived as anonymous and autonomous individuals with little analysis of user identity or interaction. Further, the contextual impact of user group dynamics on the relationship between building design and building user is rarely addressed in the literature. Producing a more nuanced understanding of users in situ is proposed as an important area for future design quality research. PMID:27110217

The evaluation of a virtual education system based on the DeLone and McLean model:  A path analysis.

PubMed

Mahmoodi, Zohreh; Esmaelzadeh-Saeieh, Sara; Lotfi, Razieh; Baradaran Eftekhari, Monir; Akbari Kamrani, Mahnaz; Mehdizadeh Tourzani, Zahra; Salehi, Katayoun

2017-01-01

Background : The Internet has dramatically influenced the introduction of virtual education. Virtual education is a term that involves online education and e-learning. This study was conducted to evaluate a virtual education system based on the DeLone and McLean model. Methods : This descriptive analytical study was conducted using the census method on all the students of the Nursing and Midwifery Department of Alborz University of Medical Sciences who had taken at least one online course in 2016-2017. Data were collected using a researcher-made questionnaire based on the DeLone and McLean model in six domains and then analyzed in SPSS-16 and LISREL-8.8 using the path analysis. Results : The goodness of fit indices (GFI) of the model represent the desirability and good fit of the model, and the rational nature of the adjusted relationships between the variables based on a conceptual model (GFI = 0.98; RMSEA = 0.014).The results showed that system quality has the greatest impact on the net benefits of the system through both direct and indirect paths (β=0.52), service quality through the indirect path (β=0.03) and user satisfaction through the direct path (β=0.73). Conclusions : According to the results, system quality has the greatest overall impact on the net benefits of the system, both directly and indirectly by affecting user satisfaction and the intention to use. System quality should therefore be further emphasized, to use these systems more efficiently.

Simulating land-use changes and stormwater-detention basins and evaluating their effect on peak streamflows and stream-water quality in Irondequoit Creek basin, New York—A user's manual for HSPF and GenScn

USGS Publications Warehouse

Coon, William F.

2003-01-01

A computer model of hydrologic and water-quality processes of the Irondequoit Creek basin in Monroe and Ontario Counties, N.Y., was developed during 2000-02 to enable water-resources managers to simulate the effects of future development and stormwater-detention basins on peak flows and water quality of Irondequoit Creek and its tributaries. The model was developed with the program Hydrological Simulation Program-Fortran (HSPF) such that proposed or hypothetical land-use changes and instream stormwater-detention basins could be simulated, and their effects on peak flows and loads of total suspended solids, total phosphorus, ammonia-plus-organic nitrogen, and nitrate-plus-nitrite nitrogen could be analyzed, through an interactive computer program known as Generation and Analysis of Model Simulation Scenarios for Watersheds (GenScn). This report is a user's manual written to guide the Irondequoit Creek Watershed Collaborative in (1) the creation of land-use and flow-detention scenarios for simulation by the HSPF model, and (2) the use of GenScn to analyze the results of these simulations. These analyses can, in turn, aid the group in making basin-wide water-resources-management decisions.

Quality of life, autonomy, satisfaction, and costs associated with mental health supported accommodation services in England: a national survey.

PubMed

Killaspy, Helen; Priebe, Stefan; Bremner, Stephen; McCrone, Paul; Dowling, Sarah; Harrison, Isobel; Krotofil, Joanna; McPherson, Peter; Sandhu, Sima; Arbuthnott, Maurice; Curtis, Sarah; Leavey, Gerard; Shepherd, Geoff; Eldridge, Sandra; King, Michael

2016-12-01

Little research has been done into the effectiveness of mental health supported accommodation services. We did a national survey to investigate provision and costs of services and assess service user quality of life and outcomes across England. We randomly sampled three types of services from 14 nationally representative regions-residential care, supported housing, and floating outreach-and recruited up to ten service users per service. Service quality and costs and service users' quality of life, autonomy, and satisfaction with care were assessed in a standardised manner with validated tools and compared by multilevel modelling. 619 service users were recruited from 22 residential care, 35 supported housing, and 30 floating outreach services. Those in residential care and supported housing had more severe mental health problems than those in floating outreach. 348 (57%) were assessed as being at risk of severe self-neglect and 229 (37%) as being vulnerable to exploitation in the previous 2 years. Residential care was most expensive but provided for people with the greatest needs. The mean annual budget was £466 687 for residential care (range £276 000-777 920), compared with £365 452 for supported housing (£174 877-818 000), and £172 114 for floating outreach (£17 126-491 692). Quality of care was best in supported housing. People in supported housing and floating outreach were more socially included but experienced more crime than those in residential care. After adjustment for service quality and service user sociodemographic and clinical factors, quality of life was similar for service users in residential care and supported housing (mean difference -0·138, 95% CI -0·402 to 0·126, p=0·306) and lower for those in floating outreach than in residential care (-0·424, -0·734 to -0·114, p=0·007). However, autonomy was greater for those in supported housing than for those in residential care (0·145, 0·010 to 0·279, p=0.035). Satisfaction with care was similar across services. Supported housing might be cost-effective, but the benefits need to be weighed against the risks associated with increased autonomy. National Institute for Health Research. Copyright © 2016 Elsevier Ltd. All rights reserved.

Maintaining quality of health services after abolition of user fees: A Uganda case study

PubMed Central

Nabyonga-Orem, Juliet; Karamagi, Humphrey; Atuyambe, Lynn; Bagenda, Fred; Okuonzi, Sam A; Walker, Oladapo

2008-01-01

Background It has been argued that quality improvements that result from user charges reduce their negative impact on utilization especially of the poor. In Uganda, because there was no concrete evidence for improvements in quality of care following the introduction of user charges, the government abolished user fees in all public health units on 1st March 2001. This gave us the opportunity to prospectively study how different aspects of quality of care change, as a country changes its health financing options from user charges to free services, in a developing country setting. The outcome of the study may then provide insights into policy actions to maintain quality of care following removal of user fees. Methods A population cohort and representative health facilities were studied longitudinally over 3 years after the abolition of user fees. Quantitative and qualitative methods were used to obtain data. Parameters evaluated in relation to quality of care included availability of drugs and supplies and; health worker variables. Results Different quality variables assessed showed that interventions that were put in place were able to maintain, or improve the technical quality of services. There were significant increases in utilization of services, average drug quantities and stock out days improved, and communities reported health workers to be hardworking, good and dedicated to their work to mention but a few. Communities were more appreciative of the services, though expectations were lower. However, health workers felt they were not adequately motivated given the increased workload. Conclusion The levels of technical quality of care attained in a system with user fees can be maintained, or even improved without the fees through adoption of basic, sustainable system modifications that are within the reach of developing countries. However, a trade-off between residual perceptions of reduced service quality, and the welfare gains from removal of user fees should guide such a policy change. PMID:18471297

Ontology-based topic clustering for online discussion data

NASA Astrophysics Data System (ADS)

Wang, Yongheng; Cao, Kening; Zhang, Xiaoming

2013-03-01

With the rapid development of online communities, mining and extracting quality knowledge from online discussions becomes very important for the industrial and marketing sector, as well as for e-commerce applications and government. Most of the existing techniques model a discussion as a social network of users represented by a user-based graph without considering the content of the discussion. In this paper we propose a new multilayered mode to analysis online discussions. The user-based and message-based representation is combined in this model. A novel frequent concept sets based clustering method is used to cluster the original online discussion network into topic space. Domain ontology is used to improve the clustering accuracy. Parallel methods are also used to make the algorithms scalable to very large data sets. Our experimental study shows that the model and algorithms are effective when analyzing large scale online discussion data.

Reverberation negatively impacts musical sound quality for cochlear implant users.

PubMed

Roy, Alexis T; Vigeant, Michelle; Munjal, Tina; Carver, Courtney; Jiradejvong, Patpong; Limb, Charles J

2015-09-01

Satisfactory musical sound quality remains a challenge for many cochlear implant (CI) users. In particular, questionnaires completed by CI users suggest that reverberation due to room acoustics can negatively impact their music listening experience. The objective of this study was to more specifically characterize of the effect of reverberation on musical sound quality in CI users, normal hearing (NH) non-musicians, and NH musicians using a previously designed assessment method, called Cochlear Implant-MUltiple Stimulus with Hidden Reference and Anchor (CI-MUSHRA). In this method, listeners were randomly presented with an anechoic musical segment and five-versions of this segment in which increasing amounts of reverberation were artificially added. Participants listened to the six reverberation versions and provided sound quality ratings between 0 (very poor) and 100 (excellent). Results demonstrated that on average CI users and NH non-musicians preferred the sound quality of anechoic versions to more reverberant versions. In comparison, NH musicians could be delineated into those who preferred the sound quality of anechoic pieces and those who preferred pieces with some reverberation. This is the first study, to our knowledge, to objectively compare the effects of reverberation on musical sound quality ratings in CI users. These results suggest that musical sound quality for CI users can be improved by non-reverberant listening conditions and musical stimuli in which reverberation is removed.

Selecting Summary Statistics in Approximate Bayesian Computation for Calibrating Stochastic Models

PubMed Central

Burr, Tom

2013-01-01

Approximate Bayesian computation (ABC) is an approach for using measurement data to calibrate stochastic computer models, which are common in biology applications. ABC is becoming the “go-to” option when the data and/or parameter dimension is large because it relies on user-chosen summary statistics rather than the full data and is therefore computationally feasible. One technical challenge with ABC is that the quality of the approximation to the posterior distribution of model parameters depends on the user-chosen summary statistics. In this paper, the user requirement to choose effective summary statistics in order to accurately estimate the posterior distribution of model parameters is investigated and illustrated by example, using a model and corresponding real data of mitochondrial DNA population dynamics. We show that for some choices of summary statistics, the posterior distribution of model parameters is closely approximated and for other choices of summary statistics, the posterior distribution is not closely approximated. A strategy to choose effective summary statistics is suggested in cases where the stochastic computer model can be run at many trial parameter settings, as in the example. PMID:24288668

Selecting summary statistics in approximate Bayesian computation for calibrating stochastic models.

PubMed

Burr, Tom; Skurikhin, Alexei

2013-01-01

Approximate Bayesian computation (ABC) is an approach for using measurement data to calibrate stochastic computer models, which are common in biology applications. ABC is becoming the "go-to" option when the data and/or parameter dimension is large because it relies on user-chosen summary statistics rather than the full data and is therefore computationally feasible. One technical challenge with ABC is that the quality of the approximation to the posterior distribution of model parameters depends on the user-chosen summary statistics. In this paper, the user requirement to choose effective summary statistics in order to accurately estimate the posterior distribution of model parameters is investigated and illustrated by example, using a model and corresponding real data of mitochondrial DNA population dynamics. We show that for some choices of summary statistics, the posterior distribution of model parameters is closely approximated and for other choices of summary statistics, the posterior distribution is not closely approximated. A strategy to choose effective summary statistics is suggested in cases where the stochastic computer model can be run at many trial parameter settings, as in the example.

Streamlining air quality models in Alabama

DOT National Transportation Integrated Search

2004-07-01

This report documents a research project sponsored by the Alabama Department of Transportation (ALDOT) and conducted by the University of Central Florida (UCF) and the University of Alabama at Birmingham (UAB) to develop a user-friendly, Windows vers...

How users adopt healthcare information: An empirical study of an online Q&A community.

PubMed

Jin, Jiahua; Yan, Xiangbin; Li, Yijun; Li, Yumei

2016-02-01

The emergence of social media technology has led to the creation of many online healthcare communities, where patients can easily share and look for healthcare-related information from peers who have experienced a similar problem. However, with increased user-generated content, there is a need to constantly analyse which content should be trusted as one sifts through enormous amounts of healthcare information. This study aims to explore patients' healthcare information seeking behavior in online communities. Based on dual-process theory and the knowledge adoption model, we proposed a healthcare information adoption model for online communities. This model highlights that information quality, emotional support, and source credibility are antecedent variables of adoption likelihood of healthcare information, and competition among repliers and involvement of recipients moderate the relationship between the antecedent variables and adoption likelihood. Empirical data were collected from the healthcare module of China's biggest Q&A community-Baidu Knows. Text mining techniques were adopted to calculate the information quality and emotional support contained in each reply text. A binary logistics regression model and hierarchical regression approach were employed to test the proposed conceptual model. Information quality, emotional support, and source credibility have significant and positive impact on healthcare information adoption likelihood, and among these factors, information quality has the biggest impact on a patient's adoption decision. In addition, competition among repliers and involvement of recipients were tested as moderating effects between these antecedent factors and the adoption likelihood. Results indicate competition among repliers positively moderates the relationship between source credibility and adoption likelihood, and recipients' involvement positively moderates the relationship between information quality, source credibility, and adoption decision. In addition to information quality and source credibility, emotional support has significant positive impact on individuals' healthcare information adoption decisions. Moreover, the relationships between information quality, source credibility, emotional support, and adoption decision are moderated by competition among repliers and involvement of recipients. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

A better sequence-read simulator program for metagenomics.

PubMed

Johnson, Stephen; Trost, Brett; Long, Jeffrey R; Pittet, Vanessa; Kusalik, Anthony

2014-01-01

There are many programs available for generating simulated whole-genome shotgun sequence reads. The data generated by many of these programs follow predefined models, which limits their use to the authors' original intentions. For example, many models assume that read lengths follow a uniform or normal distribution. Other programs generate models from actual sequencing data, but are limited to reads from single-genome studies. To our knowledge, there are no programs that allow a user to generate simulated data following non-parametric read-length distributions and quality profiles based on empirically-derived information from metagenomics sequencing data. We present BEAR (Better Emulation for Artificial Reads), a program that uses a machine-learning approach to generate reads with lengths and quality values that closely match empirically-derived distributions. BEAR can emulate reads from various sequencing platforms, including Illumina, 454, and Ion Torrent. BEAR requires minimal user input, as it automatically determines appropriate parameter settings from user-supplied data. BEAR also uses a unique method for deriving run-specific error rates, and extracts useful statistics from the metagenomic data itself, such as quality-error models. Many existing simulators are specific to a particular sequencing technology; however, BEAR is not restricted in this way. Because of its flexibility, BEAR is particularly useful for emulating the behaviour of technologies like Ion Torrent, for which no dedicated sequencing simulators are currently available. BEAR is also the first metagenomic sequencing simulator program that automates the process of generating abundances, which can be an arduous task. BEAR is useful for evaluating data processing tools in genomics. It has many advantages over existing comparable software, such as generating more realistic reads and being independent of sequencing technology, and has features particularly useful for metagenomics work.

Realization of high quality production schedules: Structuring quality factors via iteration of user specification processes

NASA Technical Reports Server (NTRS)

Hamazaki, Takashi

1992-01-01

This paper describes an architecture for realizing high quality production schedules. Although quality is one of the most important aspects of production scheduling, it is difficult, even for a user, to specify precisely. However, it is also true that the decision as to whether a scheduler is good or bad can only be made by the user. This paper proposes the following: (1) the quality of a schedule can be represented in the form of quality factors, i.e. constraints and objectives of the domain, and their structure; (2) quality factors and their structure can be used for decision making at local decision points during the scheduling process; and (3) that they can be defined via iteration of user specification processes.

[Quality perceived by users of minor surgery according to care level and the professionals that carried it out].

PubMed

Oltra Rodríguez, Enrique; Fernández García, Benjamín; Cabiedes Miragaya, Laura; Riestra Rodríguez, Rosario; González Aller, Cristina; Osorio Álvarez, Sofía

2018-04-26

Nowadays minor surgery is performed by di- fferent professionals at primary as well as specialized care. Being a healthcare technology, minor surgery must be assessed in order to achieve an organizational efficiency. User's satisfaction must be one of the quality criteria. That is why an analysis of the quality perceived by users according to where minor surgery takes place and who carries it out is made. This study explores, conducting telephone surveys, the satisfaction of a sample of 275 minor surgery patients of two hospitals and three primary healthcare areas of Asturias. The survey is based on the SERVQUAL model adapting the one used by the Spanish Ministry of Health in 1977. A behavior pattern of satisfaction was established in terms of the variables that increase or diminish it. In every item, satisfaction was perceived as good or very good at least in 84% of the survey users and in the majority was over 95%. There was a significant difference in favour of primary care with respect to waiting time (p less than 0,001), explanations received (p=0,002) and security perceived (p=0,015). The more explanatory variables of excellent satisfaction were the sense of security and the staff attention. The kind of professional did not represent a conditioning factor and the level of healthcare only appeared to be so among those who did not feel safe showing to be less satisfied those treated in primary care. Good quality perceived by users does not seem to be penalized by the fact that minor surgery can be carried out at different healthcare levels or which specialist performs it.

A user-friendly model for spray drying to aid pharmaceutical product development.

PubMed

Grasmeijer, Niels; de Waard, Hans; Hinrichs, Wouter L J; Frijlink, Henderik W

2013-01-01

The aim of this study was to develop a user-friendly model for spray drying that can aid in the development of a pharmaceutical product, by shifting from a trial-and-error towards a quality-by-design approach. To achieve this, a spray dryer model was developed in commercial and open source spreadsheet software. The output of the model was first fitted to the experimental output of a Büchi B-290 spray dryer and subsequently validated. The predicted outlet temperatures of the spray dryer model matched the experimental values very well over the entire range of spray dryer settings that were tested. Finally, the model was applied to produce glassy sugars by spray drying, an often used excipient in formulations of biopharmaceuticals. For the production of glassy sugars, the model was extended to predict the relative humidity at the outlet, which is not measured in the spray dryer by default. This extended model was then successfully used to predict whether specific settings were suitable for producing glassy trehalose and inulin by spray drying. In conclusion, a spray dryer model was developed that is able to predict the output parameters of the spray drying process. The model can aid the development of spray dried pharmaceutical products by shifting from a trial-and-error towards a quality-by-design approach.

Influence of WeChat on sleep quality among undergraduates in Chongqing, China: a cross-sectional study.

PubMed

Xu, Xianglong; Lin, Qianyi; Zhang, Yan; Zhu, Runzhi; Sharma, Manoj; Zhao, Yong

2016-01-01

Previous studies showed that social media is associated with sleep quality. WeChat (a native social media in China) is very popular in China, especially among the youth. In the second quarter of 2016, Tencent's WeChat had 806 million monthly active users. The study sought to identify the influence of WeChat on the sleep quality among undergraduate students. A cross-sectional survey adopted a multi-stage stratified sampling survey to investigate undergraduates in Chongqing, China. Data were collected on 1979 eligible adults, aged 20.27 (SD: 1.26) years old, using Pittsburgh Sleep Quality Index (PSQI) to measure sleep quality. Respondents aged 20.27 ± 1.26 years included 535 (27.0%) males, and 1311 (66.3%) reported as having poor sleep quality. Of the 1979 participants, 1320 (66.70%) were WeChat users. In multivariable analyses, gender, grade, nationality, living costs, the student leader, the only child, type of university, WeChat usage was associated with domains of PSQI among undergraduates ( p  < 0.05 for all). Compared with non-users, WeChat users had a lower score of subjective quality of sleep, sleep latency, use of sleeping medication, daytime dysfunction, and global PSQI score ( p  < 0.05 for all). WeChat users may have better sleep quality than non-WeChat users among undergraduates. To determine causal relationships, further longitudinal studies will be required to test for the association between WeChat users and sleep quality. This study may also provide some implications for health promotion on sleep quality of undergraduate students.

A User-Centered Educational Modeling Language Improving the Controllability of Learning Design Quality

ERIC Educational Resources Information Center

Zendi, Asma; Bouhadada, Tahar; Bousbia, Nabila

2016-01-01

Semiformal EMLs are developed to facilitate the adoption of educational modeling languages (EMLs) and to address practitioners' learning design concerns, such as reusability and readability. In this article, SDLD (Structure Dialogue Learning Design) is presented, which is a semiformal EML that aims to improve controllability of learning design…

The Disabled Student Experience: Does the SERVQUAL Scale Measure Up?

ERIC Educational Resources Information Center

Vaughan, Elizabeth; Woodruffe-Burton, Helen

2011-01-01

Purpose: The purpose of this paper is to empirically test a new disabled service user-specific service quality model ARCHSECRET against a modified SERVQUAL model in the context of disabled students within higher education. Design/methodology/approach: The application of SERVQUAL in the voluntary sector had raised serious issues on its portability…

A Distributed Online Curriculum and Courseware Development Model

ERIC Educational Resources Information Center

Durdu, Pinar Onay; Yalabik, Nese; Cagiltay, Kursat

2009-01-01

A distributed online curriculum and courseware development model (DONC[superscript 2]) is developed and tested in this study. Courseware development teams which may work in different institutions who need to develop high quality, reduced cost, on time products will be the users of DONC[superscript 2]. The related features from the disciplines of…

Using GIS Models to Identify Relative Nitrogen Attenuation by Riparian Buffers in the Coastal Plain of North Carolina

EPA Science Inventory

Riparian areas have demonstrated the ability to attenuate nutrients and provide water quality services at the field scale, but services of riparian buffers for downstream users should be assessed at watershed scales. GIS-based riparian models have been developed to connect ripari...

Evolution of Reference: A New Service Model for Science and Engineering Libraries

ERIC Educational Resources Information Center

Bracke, Marianne Stowell; Chinnaswamy, Sainath; Kline, Elizabeth

2008-01-01

This article explores the different steps involved in adopting a new service model at the University of Arizona Science-Engineering Library. In a time of shrinking budgets and changing user behavior the library was forced to rethink it reference services to be cost effective and provide quality service at the same time. The new model required…

Measuring Website Quality: Asymmetric Effect of User Satisfaction

ERIC Educational Resources Information Center

Kincl, Tomas; Strach, Pavel

2012-01-01

Website quality measurement tools have been largely static and have struggled to determine relevant attributes of user satisfaction. This study compares and contrasts attributes of user satisfaction based on usability guidelines seeking to identify practical easy-to-administer measurement tools. The website users assessed business school homepages…

Listening to parents to improve health visiting practice.

PubMed

Morton, Alison; Hargreaves, Sharon; Taylor, Liz

2015-05-01

Listening to the "voice" of the service user is now widely accepted as central to the delivery of high quality healthcare. This paper presents an overview of the importance of service user engagement and personalised care in health visiting with a brief review of recent policy and research. A personalised approach to health visiting practice is recommended to improve service user experience and uptake of the health visiting service offer and this is considered most significant when engaging "hard to reach" groups. A project report on a service user experience strategy within the 0-19 service of a NHS Trust in England is presented which describes initiatives to develop a health visiting and school nursing service that listens to service users. A cyclical service user engagement model which incorporates continuous reviews and service reconfiguration is described with examples of service changes in response to expressed local needs.

The "Consumer Report" version of Earth Science Data Quality description

NASA Astrophysics Data System (ADS)

Vicente, G. A.

2014-12-01

The generation, delivery and access of Earth Observation (EO) data quality information is a difficult problem because it is not uniquely defined, user dependent, difficult to be quantified, handled differently by different teams and perceived differently by data providers and data users. Initiatives such as the International Organization for Standards (ISO) 19115 and 19157 are important steps forward but difficult to implement, too complex and out of reach for the majority of data producers and users. This is because most users only want a quick and intelligible way to compare data sets from different providers to find the ones that best fit their interest. Therefore we need to simplify the problem by focusing on a few relevant quality parameters and develop a common framework to deliver them. This work is intended to tap into the data producers and user's knowledge and expertise on data quality for the development and adoption of a "Consumer Report" version of a "Data Quality Matrix". The goal is to find the most efficient and friendly approach to displays a selected number of quality parameters rated to each product and to target group of users.

Motivating medical information system performance by system quality, service quality, and job satisfaction for evidence-based practice

PubMed Central

2012-01-01

Background No previous studies have addressed the integrated relationships among system quality, service quality, job satisfaction, and system performance; this study attempts to bridge such a gap with evidence-based practice study. Methods The convenience sampling method was applied to the information system users of three hospitals in southern Taiwan. A total of 500 copies of questionnaires were distributed, and 283 returned copies were valid, suggesting a valid response rate of 56.6%. SPSS 17.0 and AMOS 17.0 (structural equation modeling) statistical software packages were used for data analysis and processing. Results The findings are as follows: System quality has a positive influence on service quality (γ11= 0.55), job satisfaction (γ21= 0.32), and system performance (γ31= 0.47). Service quality (β31= 0.38) and job satisfaction (β32= 0.46) will positively influence system performance. Conclusions It is thus recommended that the information office of hospitals and developers take enhancement of service quality and user satisfaction into consideration in addition to placing b on system quality and information quality when designing, developing, or purchasing an information system, in order to improve benefits and gain more achievements generated by hospital information systems. PMID:23171394

Library Users' Service Desires: A LibQUAL+ Study

ERIC Educational Resources Information Center

Thompson, Bruce; Kyrillidou, Martha; Cook, Colleen

2008-01-01

The present study was conducted to explore library users' desired service quality levels on the twenty-two core LibQUAL+ items. Specifically, we explored similarities and differences in users' desired library service quality levels across user groups (i.e., undergraduate students, graduate students, and faculty), across geographic locations (i.e.,…

Assessment and improvement of sound quality in cochlear implant users

PubMed Central

Caldwell, Meredith T.; Jiam, Nicole T.

2017-01-01

Objectives Cochlear implants (CIs) have successfully provided speech perception to individuals with sensorineural hearing loss. Recent research has focused on more challenging acoustic stimuli such as music and voice emotion. The purpose of this review is to evaluate and describe sound quality in CI users with the purposes of summarizing novel findings and crucial information about how CI users experience complex sounds. Data Sources Here we review the existing literature on PubMed and Scopus to present what is known about perceptual sound quality in CI users, discuss existing measures of sound quality, explore how sound quality may be effectively studied, and examine potential strategies of improving sound quality in the CI population. Results Sound quality, defined here as the perceived richness of an auditory stimulus, is an attribute of implant‐mediated listening that remains poorly studied. Sound quality is distinct from appraisal, which is generally defined as the subjective likability or pleasantness of a sound. Existing studies suggest that sound quality perception in the CI population is limited by a range of factors, most notably pitch distortion and dynamic range compression. Although there are currently very few objective measures of sound quality, the CI‐MUSHRA has been used as a means of evaluating sound quality. There exist a number of promising strategies to improve sound quality perception in the CI population including apical cochlear stimulation, pitch tuning, and noise reduction processing strategies. Conclusions In the published literature, sound quality perception is severely limited among CI users. Future research should focus on developing systematic, objective, and quantitative sound quality metrics and designing therapies to mitigate poor sound quality perception in CI users. Level of Evidence NA PMID:28894831

Development and Application of an Analyst Process Model for a Search Task Scenario

DTIC Science & Technology

2013-12-01

varied experience levels of the users we will be looking at not only testing the new tool, but also understanding the impact on user groups that the...each group using the toolsets to complete search tasks. 2.4 Hypotheses This research effort seeks to test the following hypotheses: H0... quantitative measures: report quality, errors, and cognitive workload. Due to the crossover design of the experiment, these were analyzed by group and within

The economic value of stream restoration

NASA Astrophysics Data System (ADS)

Collins, Alan; Rosenberger, Randy; Fletcher, Jerald

2005-02-01

The economic value of restoring Deckers Creek in Monongalia and Preston counties of West Virginia was determined from mail, Internet, and personal contact surveys. Multiattribute, choice experiments were conducted and nested logit models were estimated to derive the economic values of full restoration for three attributes of this creek: aquatic life, swimming, and scenic quality. Their relative economic values were that aquatic life > scenic quality ≈ swimming. These economic values imply that respondents had the highest value for aquatic life when fully restoring Deckers Creek to a sustainable fishery rather than a "put and take" fishery that cannot sustain fish populations. The welfare improvement estimates for full restoration of all three attributes ranged between 12 and 16 per month per household. Potential stream users (anglers) had the largest welfare gain from restoration, while nonangler respondents had the lowest. When these estimates were aggregated up to the entire watershed population, the benefit from restoration of Deckers Creek was estimated to be about $1.9 million annually. This benefit does not account for any economic values from partial stream restoration. On the basis of log likelihood tests of the nested logit models, two subsamples of the survey population (the general population and stream users) were found to be from the same population. Thus restoration choices by stream users may be representative of the watershed population, although the sample size of stream users was small in this research.

A metadata reporting framework for standardization and synthesis of ecohydrological field observations

NASA Astrophysics Data System (ADS)

Christianson, D. S.; Varadharajan, C.; Detto, M.; Faybishenko, B.; Gimenez, B.; Jardine, K.; Negron Juarez, R. I.; Pastorello, G.; Powell, T.; Warren, J.; Wolfe, B.; McDowell, N. G.; Kueppers, L. M.; Chambers, J.; Agarwal, D.

2016-12-01

The U.S. Department of Energy's (DOE) Next Generation Ecosystem Experiment (NGEE) Tropics project aims to develop a process-rich tropical forest ecosystem model that is parameterized and benchmarked by field observations. Thus, data synthesis, quality assurance and quality control (QA/QC), and data product generation of a diverse and complex set of ecohydrological observations, including sapflux, leaf surface temperature, soil water content, and leaf gas exchange from sites across the Tropics, are required to support model simulations. We have developed a metadata reporting framework, implemented in conjunction with the NGEE Tropics Data Archive tool, to enable cross-site and cross-method comparison, data interpretability, and QA/QC. We employed a modified User-Centered Design approach, which involved short development cycles based on user-identified needs, and iterative testing with data providers and users. The metadata reporting framework currently has been implemented for sensor-based observations and leverages several existing metadata protocols. The framework consists of templates that define a multi-scale measurement position hierarchy, descriptions of measurement settings, and details about data collection and data file organization. The framework also enables data providers to define data-access permission settings, provenance, and referencing to enable appropriate data usage, citation, and attribution. In addition to describing the metadata reporting framework, we discuss tradeoffs and impressions from both data providers and users during the development process, focusing on the scalability, usability, and efficiency of the framework.

Watershed Deposition Tool for air quality impacts

EPA Pesticide Factsheets

The WDT is a software tool for mapping deposition estimates from the CMAQ model to watersheds. It provides users with the linkage of air and water needed for the total maximum daily load (TMDL) and related nonpoint-source watershed analyses.

Resource Quantity and Quality Determine the Inter-Specific Associations between Ecosystem Engineers and Resource Users in a Cavity-Nest Web

PubMed Central

Robles, Hugo; Martin, Kathy

2013-01-01

While ecosystem engineering is a widespread structural force of ecological communities, the mechanisms underlying the inter-specific associations between ecosystem engineers and resource users are poorly understood. A proper knowledge of these mechanisms is, however, essential to understand how communities are structured. Previous studies suggest that increasing the quantity of resources provided by ecosystem engineers enhances populations of resource users. In a long-term study (1995-2011), we show that the quality of the resources (i.e. tree cavities) provided by ecosystem engineers is also a key feature that explains the inter-specific associations in a tree cavity-nest web. Red-naped sapsuckers ( Sphyrapicus nuchalis ) provided the most abundant cavities (52% of cavities, 0.49 cavities/ha). These cavities were less likely to be used than other cavity types by mountain bluebirds ( Sialia currucoides ), but provided numerous nest-sites (41% of nesting cavities) to tree swallows ( Tachycineta bicolour ). Swallows experienced low reproductive outputs in northern flicker ( Colaptes auratus ) cavities compared to those in sapsucker cavities (1.1 vs. 2.1 fledglings/nest), but the highly abundant flickers (33% of cavities, 0.25 cavities/ha) provided numerous suitable nest-sites for bluebirds (58%). The relative shortage of cavities supplied by hairy woodpeckers ( Picoides villosus ) and fungal/insect decay (<10% of cavities each, <0.09 cavities/ha) provided fewer breeding opportunities (<15% of nests), but represented high quality nest-sites for both bluebirds and swallows. Because both the quantity and quality of resources supplied by different ecosystem engineers may explain the amount of resources used by each resource user, conservation strategies may require different management actions to be implemented for the key ecosystem engineer of each resource user. We, therefore, urge the incorporation of both resource quantity and quality into models that assess community dynamics to improve conservation actions and our understanding of ecological communities based on ecosystem engineering. PMID:24040324

Resource quantity and quality determine the inter-specific associations between ecosystem engineers and resource users in a cavity-nest web.

PubMed

Robles, Hugo; Martin, Kathy

2013-01-01

While ecosystem engineering is a widespread structural force of ecological communities, the mechanisms underlying the inter-specific associations between ecosystem engineers and resource users are poorly understood. A proper knowledge of these mechanisms is, however, essential to understand how communities are structured. Previous studies suggest that increasing the quantity of resources provided by ecosystem engineers enhances populations of resource users. In a long-term study (1995-2011), we show that the quality of the resources (i.e. tree cavities) provided by ecosystem engineers is also a key feature that explains the inter-specific associations in a tree cavity-nest web. Red-naped sapsuckers (Sphyrapicusnuchalis) provided the most abundant cavities (52% of cavities, 0.49 cavities/ha). These cavities were less likely to be used than other cavity types by mountain bluebirds (Sialiacurrucoides), but provided numerous nest-sites (41% of nesting cavities) to tree swallows (Tachycinetabicolour). Swallows experienced low reproductive outputs in northern flicker (Colaptesauratus) cavities compared to those in sapsucker cavities (1.1 vs. 2.1 fledglings/nest), but the highly abundant flickers (33% of cavities, 0.25 cavities/ha) provided numerous suitable nest-sites for bluebirds (58%). The relative shortage of cavities supplied by hairy woodpeckers (Picoidesvillosus) and fungal/insect decay (<10% of cavities each, <0.09 cavities/ha) provided fewer breeding opportunities (<15% of nests), but represented high quality nest-sites for both bluebirds and swallows. Because both the quantity and quality of resources supplied by different ecosystem engineers may explain the amount of resources used by each resource user, conservation strategies may require different management actions to be implemented for the key ecosystem engineer of each resource user. We, therefore, urge the incorporation of both resource quantity and quality into models that assess community dynamics to improve conservation actions and our understanding of ecological communities based on ecosystem engineering.

Revisiting the Procedures for the Vector Data Quality Assurance in Practice

NASA Astrophysics Data System (ADS)

Erdoğan, M.; Torun, A.; Boyacı, D.

2012-07-01

Immense use of topographical data in spatial data visualization, business GIS (Geographic Information Systems) solutions and applications, mobile and location-based services forced the topo-data providers to create standard, up-to-date and complete data sets in a sustainable frame. Data quality has been studied and researched for more than two decades. There have been un-countable numbers of references on its semantics, its conceptual logical and representations and many applications on spatial databases and GIS. However, there is a gap between research and practice in the sense of spatial data quality which increases the costs and decreases the efficiency of data production. Spatial data quality is well-known by academia and industry but usually in different context. The research on spatial data quality stated several issues having practical use such as descriptive information, metadata, fulfillment of spatial relationships among data, integrity measures, geometric constraints etc. The industry and data producers realize them in three stages; pre-, co- and post data capturing. The pre-data capturing stage covers semantic modelling, data definition, cataloguing, modelling, data dictionary and schema creation processes. The co-data capturing stage covers general rules of spatial relationships, data and model specific rules such as topologic and model building relationships, geometric threshold, data extraction guidelines, object-object, object-belonging class, object-non-belonging class, class-class relationships to be taken into account during data capturing. And post-data capturing stage covers specified QC (quality check) benchmarks and checking compliance to general and specific rules. The vector data quality criteria are different from the views of producers and users. But these criteria are generally driven by the needs, expectations and feedbacks of the users. This paper presents a practical method which closes the gap between theory and practice. Development of spatial data quality concepts into developments and application requires existence of conceptual, logical and most importantly physical existence of data model, rules and knowledge of realization in a form of geo-spatial data. The applicable metrics and thresholds are determined on this concrete base. This study discusses application of geo-spatial data quality issues and QA (quality assurance) and QC procedures in the topographic data production. Firstly we introduce MGCP (Multinational Geospatial Co-production Program) data profile of NATO (North Atlantic Treaty Organization) DFDD (DGIWG Feature Data Dictionary), the requirements of data owner, the view of data producers for both data capturing and QC and finally QA to fulfil user needs. Then, our practical and new approach which divides the quality into three phases is introduced. Finally, implementation of our approach to accomplish metrics, measures and thresholds of quality definitions is discussed. In this paper, especially geometry and semantics quality and quality control procedures that can be performed by the producers are discussed. Some applicable best-practices that we experienced on techniques of quality control, defining regulations that define the objectives and data production procedures are given in the final remarks. These quality control procedures should include the visual checks over the source data, captured vector data and printouts, some automatic checks that can be performed by software and some semi-automatic checks by the interaction with quality control personnel. Finally, these quality control procedures should ensure the geometric, semantic, attribution and metadata quality of vector data.

Psychometric properties of the World Health Organization quality of life assessment – brief in methadone patients: a validation study in northern Taiwan

PubMed Central

2013-01-01

Background Quality of life (QOL) is an important outcome measure in the treatment of heroin addiction. The Taiwan version of the World Health Organization Quality of Life assessment (WHOQOL-BREF [TW]) has been developed and studied in various groups, but not specifically in a population of injection drug users. The aim of this study was to analyze the psychometric properties of the WHOQOL-BREF (TW) in a sample of injection drug users undergoing methadone maintenance treatment. Methods A total of 553 participants were interviewed and completed the instrument. Item-response distributions, internal consistency, corrected item-domain correlation, criterion-related validity, and construct validity through confirmatory factor analysis were evaluated. Results The frequency distribution of the 4 domains of the WHOQOL-BREF (TW) showed no floor or ceiling effects. The instrument demonstrated adequate internal consistency (Cronbach’s alpha coefficients were higher than 0.7 across the 4 domains) and all items had acceptable correlation with the corresponding domain scores (r = 0.32-0.73). Correlations (p < 0.01) of the 4 domains with the 2 benchmark items assessing overall QOL and general health were supportive of criterion-related validity. Confirmatory factor analysis yielded marginal goodness-of-fit between the 4-domain model and the sample data. Conclusions The hypothesized WHOQOL-BREF measurement model was appropriate for the injection drug users after some adjustments. Despite different patterns found in the confirmatory factor analysis, the findings overall suggest that the WHOQOL-BREF (TW) is a reliable and valid measure of QOL among injection drug users and can be utilized in future treatment outcome studies. The factor structure provided by the study also helps to understand the QOL characteristics of the injection drug users in Taiwan. However, more research is needed to examine its test-retest reliability and sensitivity to changes due to treatment. PMID:24325611

User fees across ecosystem boundaries: Are SCUBA divers willing to pay for terrestrial biodiversity conservation?

PubMed

Roberts, Michaela; Hanley, Nick; Cresswell, Will

2017-09-15

While ecological links between ecosystems have been long recognised, management rarely crosses ecosystem boundaries. Coral reefs are susceptible to damage through terrestrial run-off, and failing to account for this within management threatens reef protection. In order to quantify the extent to that coral reef users are willing to support management actions to improve ecosystem quality, we conducted a choice experiment with SCUBA divers on the island of Bonaire, Caribbean Netherlands. Specifically, we estimated their willingness to pay to reduce terrestrial overgrazing as a means to improve reef health. Willingness to pay was estimated using the multinomial, random parameter and latent class logit models. Willingness to pay for improvements to reef quality was positive for the majority of respondents. Estimates from the latent class model determined willingness to pay for reef improvements of between $31.17 - $413.18/year, dependent on class membership. This represents a significant source of funding for terrestrial conservation, and illustrates the potential for user fees to be applied across ecosystem boundaries. We argue that such across-ecosystem-boundary funding mechanisms are an important avenue for future investigation in many connected systems. Copyright © 2017 Elsevier Ltd. All rights reserved.

Can existing mobile apps support healthier food purchasing behaviour? Content analysis of nutrition content, behaviour change theory and user quality integration.

PubMed

Flaherty, Sarah-Jane; McCarthy, Mary; Collins, Alan; McAuliffe, Fionnuala

2018-02-01

To assess the quality of nutrition content and the integration of user quality components and behaviour change theory relevant to food purchasing behaviour in a sample of existing mobile apps. Descriptive comparative analysis of eleven mobile apps comprising an assessment of their alignment with existing evidence on nutrition, behaviour change and user quality, and their potential ability to support healthier food purchasing behaviour. Mobile apps freely available for public use in GoogePlay were assessed and scored according to agreed criteria to assess nutrition content quality and integration of behaviour change theory and user quality components. A sample of eleven mobile apps that met predefined inclusion criteria to ensure relevance and good quality. The quality of the nutrition content varied. Improvements to the accuracy and appropriateness of nutrition content are needed to ensure mobile apps support a healthy behaviour change process and are accessible to a wider population. There appears to be a narrow focus towards behaviour change with an overemphasis on behavioural outcomes and a small number of behaviour change techniques, which may limit effectiveness. A significant effort from the user was required to use the mobile apps appropriately which may negatively influence user acceptability and subsequent utilisation. Existing mobile apps may offer a potentially effective approach to supporting healthier food purchasing behaviour but improvements in mobile app design are required to maximise their potential effectiveness. Engagement of mobile app users and nutrition professionals is recommended to support effective design.

Development and testing of a fast conceptual river water quality model.

PubMed

Keupers, Ingrid; Willems, Patrick

2017-04-15

Modern, model based river quality management strongly relies on river water quality models to simulate the temporal and spatial evolution of pollutant concentrations in the water body. Such models are typically constructed by extending detailed hydrodynamic models with a component describing the advection-diffusion and water quality transformation processes in a detailed, physically based way. This approach is too computational time demanding, especially when simulating long time periods that are needed for statistical analysis of the results or when model sensitivity analysis, calibration and validation require a large number of model runs. To overcome this problem, a structure identification method to set up a conceptual river water quality model has been developed. Instead of calculating the water quality concentrations at each water level and discharge node, the river branch is divided into conceptual reservoirs based on user information such as location of interest and boundary inputs. These reservoirs are modelled as Plug Flow Reactor (PFR) and Continuously Stirred Tank Reactor (CSTR) to describe advection and diffusion processes. The same water quality transformation processes as in the detailed models are considered but with adjusted residence times based on the hydrodynamic simulation results and calibrated to the detailed water quality simulation results. The developed approach allows for a much faster calculation time (factor 10 5 ) without significant loss of accuracy, making it feasible to perform time demanding scenario runs. Copyright © 2017 Elsevier Ltd. All rights reserved.

Economic Feasibility of Wireless Sensor Network-Based Service Provision in a Duopoly Setting with a Monopolist Operator.

PubMed

Sanchis-Cano, Angel; Romero, Julián; Sacoto-Cabrera, Erwin J; Guijarro, Luis

2017-11-25

We analyze the feasibility of providing Wireless Sensor Network-data-based services in an Internet of Things scenario from an economical point of view. The scenario has two competing service providers with their own private sensor networks, a network operator and final users. The scenario is analyzed as two games using game theory. In the first game, sensors decide to subscribe or not to the network operator to upload the collected sensing-data, based on a utility function related to the mean service time and the price charged by the operator. In the second game, users decide to subscribe or not to the sensor-data-based service of the service providers based on a Logit discrete choice model related to the quality of the data collected and the subscription price. The sinks and users subscription stages are analyzed using population games and discrete choice models, while network operator and service providers pricing stages are analyzed using optimization and Nash equilibrium concepts respectively. The model is shown feasible from an economic point of view for all the actors if there are enough interested final users and opens the possibility of developing more efficient models with different types of services.

Quantum game application to spectrum scarcity problems

NASA Astrophysics Data System (ADS)

Zabaleta, O. G.; Barrangú, J. P.; Arizmendi, C. M.

2017-01-01

Recent spectrum-sharing research has produced a strategy to address spectrum scarcity problems. This novel idea, named cognitive radio, considers that secondary users can opportunistically exploit spectrum holes left temporarily unused by primary users. This presents a competitive scenario among cognitive users, making it suitable for game theory treatment. In this work, we show that the spectrum-sharing benefits of cognitive radio can be increased by designing a medium access control based on quantum game theory. In this context, we propose a model to manage spectrum fairly and effectively, based on a multiple-users multiple-choice quantum minority game. By taking advantage of quantum entanglement and quantum interference, it is possible to reduce the probability of collision problems commonly associated with classic algorithms. Collision avoidance is an essential property for classic and quantum communications systems. In our model, two different scenarios are considered, to meet the requirements of different user strategies. The first considers sensor networks where the rational use of energy is a cornerstone; the second focuses on installations where the quality of service of the entire network is a priority.

Process Improvements in Training Device Acceptance Testing: A Study in Total Quality Management

DTIC Science & Technology

1990-12-12

Quality Management , a small group of Government and industry specialists examined the existing training device acceptance test process for potential improvements. The agreed-to mission of the Air Force/Industry partnership was to continuously identify and promote implementable approaches to minimize the cost and time required for acceptance testing while ensuring that validated performance supports the user training requirements. Application of a Total Quality process improvement model focused on the customers and their requirements, analyzed how work was accomplished, and

Review of ride quality technology needs of industry and user groups

NASA Technical Reports Server (NTRS)

Mckenzie, J. R.; Brumaghim, S. H.

1975-01-01

A broad survey of ride quality technology state-of-the-art and a review of user evaluation of this technology were conducted. During the study 17 users of ride quality technology in 10 organizations representing land, marine and air passenger transportation modes were interviewed. Interim results and conclusions of this effort are reported.

The Place of Health Information and Socio-Emotional Support in Social Questioning and Answering

ERIC Educational Resources Information Center

Worrall, Adam; Oh, Sanghee

2013-01-01

Introduction: Little is known about the quality of health information in social contexts or how socio-emotional factors impact users' evaluations of quality. We explored how librarians, nurses and users assessed the quality of health answers posted on Yahoo! Answers, focusing on socio-emotional reactions displayed, advice given to users and…

Product Recommendation System Based on Personal Preference Model Using CAM

NASA Astrophysics Data System (ADS)

Murakami, Tomoko; Yoshioka, Nobukazu; Orihara, Ryohei; Furukawa, Koichi

Product recommendation system is realized by applying business rules acquired by data maining techniques. Business rules such as demographical patterns of purchase, are able to cover the groups of users that have a tendency to purchase products, but it is difficult to recommend products adaptive to various personal preferences only by utilizing them. In addition to that, it is very costly to gather the large volume of high quality survey data, which is necessary for good recommendation based on personal preference model. A method collecting kansei information automatically without questionnaire survey is required. The constructing personal preference model from less favor data is also necessary, since it is costly for the user to input favor data. In this paper, we propose product recommendation system based on kansei information extracted by text mining and user's preference model constructed by Category-guided Adaptive Modeling, CAM for short. CAM is a feature construction method that can generate new features constructing the space where same labeled examples are close and different labeled examples are far away from some labeled examples. It is possible to construct personal preference model by CAM despite less information of likes and dislikes categories. In the system, retrieval agent gathers the products' specification and user agent manages preference model, user's likes and dislikes. Kansei information of the products is gained by applying text mining technique to the reputation documents about the products on the web site. We carry out some experimental studies to make sure that prefrence model obtained by our method performs effectively.

The impact of SOA for achieving healthcare interoperability. An empirical investigation based on a hypothetical adoption.

PubMed

Daskalakis, S; Mantas, J

2009-01-01

The evaluation of a service-oriented prototype implementation for healthcare interoperability. A prototype framework was developed, aiming to exploit the use of service-oriented architecture (SOA) concepts for achieving healthcare interoperability and to move towards a virtual patient record (VPR) paradigm. The prototype implementation was evaluated for its hypothetical adoption. The evaluation strategy was based on the initial proposition of the DeLone and McLean model of information systems (IS) success [1], as modeled by Iivari [2]. A set of SOA and VPR characteristics were empirically encapsulated within the dimensions of IS success model, combined with measures from previous research works. The data gathered was analyzed using partial least squares (PLS). The results highlighted that system quality is a partial predictor of system use but not of user satisfaction. On the contrary, information quality proved to be a significant predictor of user satisfaction and partially a strong significant predictor of system use. Moreover, system use did not prove to be a significant predictor of individual impact whereas the bi-directional relation between use and user satisfaction did not confirm. Additionally, user satisfaction was found to be a strong significant predictor of individual impact. Finally, individual impact proved to be a strong significant predictor of organizational impact. The empirical study attempted to obtain hypothetical, but still useful beliefs and perceptions regarding the SOA prototype implementation. The deduced observations can form the basis for further investigation regarding the adaptability of SOA implementations with VPR characteristics in the healthcare domain.

LinkImputeR: user-guided genotype calling and imputation for non-model organisms.

PubMed

Money, Daniel; Migicovsky, Zoë; Gardner, Kyle; Myles, Sean

2017-07-10

Genomic studies such as genome-wide association and genomic selection require genome-wide genotype data. All existing technologies used to create these data result in missing genotypes, which are often then inferred using genotype imputation software. However, existing imputation methods most often make use only of genotypes that are successfully inferred after having passed a certain read depth threshold. Because of this, any read information for genotypes that did not pass the threshold, and were thus set to missing, is ignored. Most genomic studies also choose read depth thresholds and quality filters without investigating their effects on the size and quality of the resulting genotype data. Moreover, almost all genotype imputation methods require ordered markers and are therefore of limited utility in non-model organisms. Here we introduce LinkImputeR, a software program that exploits the read count information that is normally ignored, and makes use of all available DNA sequence information for the purposes of genotype calling and imputation. It is specifically designed for non-model organisms since it requires neither ordered markers nor a reference panel of genotypes. Using next-generation DNA sequence (NGS) data from apple, cannabis and grape, we quantify the effect of varying read count and missingness thresholds on the quantity and quality of genotypes generated from LinkImputeR. We demonstrate that LinkImputeR can increase the number of genotype calls by more than an order of magnitude, can improve genotyping accuracy by several percent and can thus improve the power of downstream analyses. Moreover, we show that the effects of quality and read depth filters can differ substantially between data sets and should therefore be investigated on a per-study basis. By exploiting DNA sequence data that is normally ignored during genotype calling and imputation, LinkImputeR can significantly improve both the quantity and quality of genotype data generated from NGS technologies. It enables the user to quickly and easily examine the effects of varying thresholds and filters on the number and quality of the resulting genotype calls. In this manner, users can decide on thresholds that are most suitable for their purposes. We show that LinkImputeR can significantly augment the value and utility of NGS data sets, especially in non-model organisms with poor genomic resources.

Quantitative Analysis Of User Interfaces For Large Electronic Home Appliances And Mobile Devices Based On Lifestyle Categorization Of Older Users.

PubMed

Shin, Wonkyoung; Park, Minyong

2017-01-01

Background/Study Context: The increasing longevity and health of older users as well as aging populations has created the need to develop senior-oriented product interfaces. This study aims to find user interface (UI) priorities according to older user groups based on their lifestyle and develop quality of UI (QUI) models for large electronic home appliances and mobile products. A segmentation table designed to show how older users can be categorized was created through a review of the literature to survey 252 subjects with a questionnaire. Factor analysis was performed to extract six preliminary lifestyle factors, which were then used for subsequent cluster analysis. The analysis resulted in four groups. Cross-analysis was carried out to investigate which characteristics were included in the groups. Analysis of variance was then applied to investigate the differences in the UI priorities among the user groups for various electronic devices. Finally, QUI models were developed and applied to those electronic devices. Differences in UI priorities were found according to the four lifestyles ("money-oriented," "innovation-oriented," "stability- and simplicity-oriented," and "innovation- and intellectual-oriented"). Twelve QUI models were developed for four different lifestyle groups associated with different products. Three washers and three smartphones were used as an example for testing the QUI models. The UI differences of the older user groups by the segmentation in this study using several key (i.e., demographic, socioeconomic, and physical-cognitive) variables are distinct from earlier studies made by a single variable. The differences in responses clearly indicate the benefits of integrating various factors of older users, rather than single variable, in order to design and develop more innovative and better consumer products in the future. The results of this study showed that older users with a potentially high buying power in the future are likely to have higher satisfaction when selecting products customized for their lifestyle. Designers could also use the results of UI evaluation for older users based on their lifestyle before developing products through QUI modeling. This approach would save time and costs.

A framework for diversifying recommendation lists by user interest expansion.

PubMed

Zhang, Zhu; Zheng, Xiaolong; Zeng, Daniel Dajun

2016-08-01

Recommender systems have been widely used to discover users' preferences and recommend interesting items to users during this age of information load. Researchers in the field of recommender systems have realized that the quality of a top-N recommendation list involves not only relevance but also diversity. Most traditional recommendation algorithms are difficult to generate a diverse item list that can cover most of his/her interests for each user, since they mainly focus on predicting accurate items similar to the dominant interests of users. Additionally, they seldom exploit semantic information such as item tags and users' interest labels to improve recommendation diversity. In this paper, we propose a novel recommendation framework which mainly adopts an expansion strategy of user interests based on social tagging information. The framework enhances the diversity of users' preferences by expanding the sizes and categories of the original user-item interaction records, and then adopts traditional recommendation models to generate recommendation lists. Empirical evaluations on three real-world data sets show that our method can effectively improve the accuracy and diversity of item recommendation.

Traffic model for the satellite component of UMTS

NASA Technical Reports Server (NTRS)

Hu, Y. F.; Sheriff, R. E.

1995-01-01

An algorithm for traffic volume estimation for satellite mobile communications systems has been developed. This algorithm makes use of worldwide databases for demographic and economic data. In order to provide for such an estimation, the effects of competing services have been considered so that likely market demand can be forecasted. Different user groups of the predicted market have been identified according to expectations in the quality of services and mobility requirement. The number of users for different user groups are calculated taking into account the gross potential market, the penetration rate of the identified services and the profitability to provide such services via satellite.

An eHealth Project on Invasive Pneumococcal Disease: Comprehensive Evaluation of a Promotional Campaign.

PubMed

Panatto, Donatella; Domnich, Alexander; Gasparini, Roberto; Bonanni, Paolo; Icardi, Giancarlo; Amicizia, Daniela; Arata, Lucia; Carozzo, Stefano; Signori, Alessio; Bechini, Angela; Boccalini, Sara

2016-12-02

The recently launched Pneumo Rischio eHealth project, which consists of an app, a website, and social networking activity, is aimed at increasing public awareness of invasive pneumococcal disease (IPD). The launch of this project was prompted by the inadequate awareness of IPD among both laypeople and health care workers, the heavy socioeconomic burden of IPD, and the far from optimal vaccination coverage in Italy, despite the availability of safe and effective vaccines. The objectives of our study were to analyze trends in Pneumo Rischio usage before and after a promotional campaign, to characterize its end users, and to assess its user-rated quality. At 7 months after launching Pneumo Rischio, we established a 4-month marketing campaign to promote the project. This intervention used various approaches and channels, including both traditional and digital marketing strategies. To highlight usage trends, we used different techniques of time series analysis and modeling, including a modified Mann-Kendall test, change-point detection, and segmented negative binomial regression of interrupted time series. Users were characterized in terms of demographics and IPD risk categories. Customer-rated quality was evaluated by means of a standardized tool in a sample of app users. Over 1 year, the app was accessed by 9295 users and the website was accessed by 143,993 users, while the project's Facebook page had 1216 fans. The promotional intervention was highly effective in increasing the daily number of users. In particular, the Mann-Kendall trend test revealed a significant (P ≤.01) increasing trend in both app and website users, while change-point detection analysis showed that the first significant change corresponded to the start of the promotional campaign. Regression analysis showed a significant immediate effect of the intervention, with a mean increase in daily numbers of users of 1562% (95% CI 456%-4870%) for the app and 620% (95% CI 176%-1777%) for the website. Similarly, the postintervention daily trend in the number of users was positive, with a relative increase of 0.9% (95% CI 0.0%-1.8%) for the app and 1.4% (95% CI 0.7%-2.1%) for the website. Demographics differed between app and website users and Facebook fans. A total of 69.15% (10,793/15,608) of users could be defined as being at risk of IPD, while 4729 users expressed intentions to ask their doctor for further information on IPD. The mean app quality score assigned by end users was approximately 79.5% (397/500). Despite its specific topic, Pneumo Rischio was accessed by a considerable number of users, who ranked it as a high-quality project. In order to reach their target populations, however, such projects should be promoted. ©Donatella Panatto, Alexander Domnich, Roberto Gasparini, Paolo Bonanni, Giancarlo Icardi, Daniela Amicizia, Lucia Arata, Stefano Carozzo, Alessio Signori, Angela Bechini, Sara Boccalini. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 02.12.2016.

A method for tailoring the information content of a software process model

NASA Technical Reports Server (NTRS)

Perkins, Sharon; Arend, Mark B.

1990-01-01

The framework is defined for a general method for selecting a necessary and sufficient subset of a general software life cycle's information products, to support new software development process. Procedures for characterizing problem domains in general and mapping to a tailored set of life cycle processes and products is presented. An overview of the method is shown using the following steps: (1) During the problem concept definition phase, perform standardized interviews and dialogs between developer and user, and between user and customer; (2) Generate a quality needs profile of the software to be developed, based on information gathered in step 1; (3) Translate the quality needs profile into a profile of quality criteria that must be met by the software to satisfy the quality needs; (4) Map the quality criteria to set of accepted processes and products for achieving each criterion; (5) Select the information products which match or support the accepted processes and product of step 4; and (6) Select the design methodology which produces the information products selected in step 5.

A method for tailoring the information content of a software process model

NASA Technical Reports Server (NTRS)

Perkins, Sharon; Arend, Mark B.

1990-01-01

The framework is defined for a general method for selecting a necessary and sufficient subset of a general software life cycle's information products, to support new software development process. Procedures for characterizing problem domains in general and mapping to a tailored set of life cycle processes and products is presented. An overview of the method is shown using the following steps: (1) During the problem concept definition phase, perform standardized interviews and dialogs between developer and user, and between user and customer; (2) Generate a quality needs profile of the software to be developed, based on information gathered in step 1; (3) Translate the quality needs profile into a profile of quality criteria that must be met by the software to satisfy the quality needs; (4) Map the quality criteria to a set of accepted processes and products for achieving each criterion; (5) select the information products which match or support the accepted processes and product of step 4; and (6) Select the design methodology which produces the information products selected in step 5.

Modeling soil erosion and transport on forest landscape

Treesearch

Ge Sun; Steven G McNulty

1998-01-01

Century-long studies on the impacts of forest management in North America suggest sediment can cause major reduction on stream water quality. Soil erosion patterns in forest watersheds are patchy and heterogeneous. Therefore, patterns of soil erosion are difficult to model and predict. The objective of this study is to develop a user friendly management tool for land...

Design and analysis for thematic map accuracy assessment: Fundamental principles

Treesearch

Stephen V. Stehman; Raymond L. Czaplewski

1998-01-01

Land-cover maps are used in numerous natural resource applications to describe the spatial distribution and pattern of land-cover, to estimate areal extent of various cover classes, or as input into habitat suitability models, land-cover change analyses, hydrological models, and risk analyses. Accuracy assessment quantifies data quality so that map users may evaluate...

Towards Interactive Construction of Topical Hierarchy: A Recursive Tensor Decomposition Approach

PubMed Central

Wang, Chi; Liu, Xueqing; Song, Yanglei; Han, Jiawei

2015-01-01

Automatic construction of user-desired topical hierarchies over large volumes of text data is a highly desirable but challenging task. This study proposes to give users freedom to construct topical hierarchies via interactive operations such as expanding a branch and merging several branches. Existing hierarchical topic modeling techniques are inadequate for this purpose because (1) they cannot consistently preserve the topics when the hierarchy structure is modified; and (2) the slow inference prevents swift response to user requests. In this study, we propose a novel method, called STROD, that allows efficient and consistent modification of topic hierarchies, based on a recursive generative model and a scalable tensor decomposition inference algorithm with theoretical performance guarantee. Empirical evaluation shows that STROD reduces the runtime of construction by several orders of magnitude, while generating consistent and quality hierarchies. PMID:26705505

Towards Interactive Construction of Topical Hierarchy: A Recursive Tensor Decomposition Approach.

PubMed

Wang, Chi; Liu, Xueqing; Song, Yanglei; Han, Jiawei

2015-08-01

Automatic construction of user-desired topical hierarchies over large volumes of text data is a highly desirable but challenging task. This study proposes to give users freedom to construct topical hierarchies via interactive operations such as expanding a branch and merging several branches. Existing hierarchical topic modeling techniques are inadequate for this purpose because (1) they cannot consistently preserve the topics when the hierarchy structure is modified; and (2) the slow inference prevents swift response to user requests. In this study, we propose a novel method, called STROD, that allows efficient and consistent modification of topic hierarchies, based on a recursive generative model and a scalable tensor decomposition inference algorithm with theoretical performance guarantee. Empirical evaluation shows that STROD reduces the runtime of construction by several orders of magnitude, while generating consistent and quality hierarchies.

DeepQA: improving the estimation of single protein model quality with deep belief networks.

PubMed

Cao, Renzhi; Bhattacharya, Debswapna; Hou, Jie; Cheng, Jianlin

2016-12-05

Protein quality assessment (QA) useful for ranking and selecting protein models has long been viewed as one of the major challenges for protein tertiary structure prediction. Especially, estimating the quality of a single protein model, which is important for selecting a few good models out of a large model pool consisting of mostly low-quality models, is still a largely unsolved problem. We introduce a novel single-model quality assessment method DeepQA based on deep belief network that utilizes a number of selected features describing the quality of a model from different perspectives, such as energy, physio-chemical characteristics, and structural information. The deep belief network is trained on several large datasets consisting of models from the Critical Assessment of Protein Structure Prediction (CASP) experiments, several publicly available datasets, and models generated by our in-house ab initio method. Our experiments demonstrate that deep belief network has better performance compared to Support Vector Machines and Neural Networks on the protein model quality assessment problem, and our method DeepQA achieves the state-of-the-art performance on CASP11 dataset. It also outperformed two well-established methods in selecting good outlier models from a large set of models of mostly low quality generated by ab initio modeling methods. DeepQA is a useful deep learning tool for protein single model quality assessment and protein structure prediction. The source code, executable, document and training/test datasets of DeepQA for Linux is freely available to non-commercial users at http://cactus.rnet.missouri.edu/DeepQA/ .

A User-Friendly DNA Modeling Software for the Interpretation of Cryo-Electron Microscopy Data.

PubMed

Larivière, Damien; Galindo-Murillo, Rodrigo; Fourmentin, Eric; Hornus, Samuel; Lévy, Bruno; Papillon, Julie; Ménétret, Jean-François; Lamour, Valérie

2017-01-01

The structural modeling of a macromolecular machine is like a "Lego" approach that is challenged when blocks, like proteins imported from the Protein Data Bank, are to be assembled with an element adopting a serpentine shape, such as DNA templates. DNA must then be built ex nihilo, but modeling approaches are either not user-friendly or very long and fastidious. In this method chapter we show how to use GraphiteLifeExplorer, a software with a simple graphical user interface that enables the sketching of free forms of DNA, of any length, at the atomic scale, as fast as drawing a line on a sheet of paper. We took as an example the nucleoprotein complex of DNA gyrase, a bacterial topoisomerase whose structure has been determined using cryo-electron microscopy (Cryo-EM). Using GraphiteLifeExplorer, we could model in one go a 155 bp long and twisted DNA duplex that wraps around DNA gyrase in the cryo-EM map, improving the quality and interpretation of the final model compared to the initially published data.

QualityML: a dictionary for quality metadata encoding

NASA Astrophysics Data System (ADS)

Ninyerola, Miquel; Sevillano, Eva; Serral, Ivette; Pons, Xavier; Zabala, Alaitz; Bastin, Lucy; Masó, Joan

2014-05-01

The scenario of rapidly growing geodata catalogues requires tools focused on facilitate users the choice of products. Having quality fields populated in metadata allow the users to rank and then select the best fit-for-purpose products. In this direction, we have developed the QualityML (http://qualityml.geoviqua.org), a dictionary that contains hierarchically structured concepts to precisely define and relate quality levels: from quality classes to quality measurements. Generically, a quality element is the path that goes from the higher level (quality class) to the lowest levels (statistics or quality metrics). This path is used to encode quality of datasets in the corresponding metadata schemas. The benefits of having encoded quality, in the case of data producers, are related with improvements in their product discovery and better transmission of their characteristics. In the case of data users, particularly decision-makers, they would find quality and uncertainty measures to take the best decisions as well as perform dataset intercomparison. Also it allows other components (such as visualization, discovery, or comparison tools) to be quality-aware and interoperable. On one hand, the QualityML is a profile of the ISO geospatial metadata standards providing a set of rules for precisely documenting quality indicator parameters that is structured in 6 levels. On the other hand, QualityML includes semantics and vocabularies for the quality concepts. Whenever possible, if uses statistic expressions from the UncertML dictionary (http://www.uncertml.org) encoding. However it also extends UncertML to provide list of alternative metrics that are commonly used to quantify quality. A specific example, based on a temperature dataset, is shown below. The annual mean temperature map has been validated with independent in-situ measurements to obtain a global error of 0.5 ° C. Level 0: Quality class (e.g., Thematic accuracy) Level 1: Quality indicator (e.g., Quantitative attribute correctness) Level 2: Measurement field (e.g., DifferentialErrors1D) Level 3: Statistic or Metric (e.g., Half-lengthConfidenceInterval) Level 4: Units (e.g. Celsius degrees) Level 5: Value (e.g.0.5) Level 6: Specifications. Additional information on how the measurement took place, citation of the reference data, the traceability of the process and a publication describing the validation process encoded using new 19157 elements or the GeoViQua (http://www.geoviqua.org) Quality Model (PQM-UQM) extensions to the ISO models. Finally, keep in mind, that QualityML is not just suitable for encoding dataset level but also considers pixel and object level uncertainties. This is done by link the metadata quality descriptions with layers representing not just the data but the uncertainty values associated with each geospatial element.

Implementing a user-driven online quality improvement toolkit for cancer care.

PubMed

Luck, Jeff; York, Laura S; Bowman, Candice; Gale, Randall C; Smith, Nina; Asch, Steven M

2015-05-01

Peer-to-peer collaboration within integrated health systems requires a mechanism for sharing quality improvement lessons. The Veterans Health Administration (VA) developed online compendia of tools linked to specific cancer quality indicators. We evaluated awareness and use of the toolkits, variation across facilities, impact of social marketing, and factors influencing toolkit use. A diffusion of innovations conceptual framework guided the collection of user activity data from the Toolkit Series SharePoint site and an online survey of potential Lung Cancer Care Toolkit users. The VA Toolkit Series site had 5,088 unique visitors in its first 22 months; 5% of users accounted for 40% of page views. Social marketing communications were correlated with site usage. Of survey respondents (n = 355), 54% had visited the site, of whom 24% downloaded at least one tool. Respondents' awareness of the lung cancer quality performance of their facility, and facility participation in quality improvement collaboratives, were positively associated with Toolkit Series site use. Facility-level lung cancer tool implementation varied widely across tool types. The VA Toolkit Series achieved widespread use and a high degree of user engagement, although use varied widely across facilities. The most active users were aware of and active in cancer care quality improvement. Toolkit use seemed to be reinforced by other quality improvement activities. A combination of user-driven tool creation and centralized toolkit development seemed to be effective for leveraging health information technology to spread disease-specific quality improvement tools within an integrated health care system. Copyright © 2015 by American Society of Clinical Oncology.

Semantic transcoding of video based on regions of interest

NASA Astrophysics Data System (ADS)

Lim, Jeongyeon; Kim, Munchurl; Kim, Jong-Nam; Kim, Kyeongsoo

2003-06-01

Traditional transcoding on multimedia has been performed from the perspectives of user terminal capabilities such as display sizes and decoding processing power, and network resources such as available network bandwidth and quality of services (QoS) etc. The adaptation (or transcoding) of multimedia contents to given such constraints has been made by frame dropping and resizing of audiovisual, as well as reduction of SNR (Signal-to-Noise Ratio) values by saving the resulting bitrates. Not only such traditional transcoding is performed from the perspective of user"s environment, but also we incorporate a method of semantic transcoding of audiovisual based on region of interest (ROI) from user"s perspective. Users can designate their interested parts in images or video so that the corresponding video contents can be adapted focused on the user"s ROI. We incorporate the MPEG-21 DIA (Digital Item Adaptation) framework in which such semantic information of the user"s ROI is represented and delivered to the content provider side as XDI (context digital item). Representation schema of our semantic information of the user"s ROI has been adopted in MPEG-21 DIA Adaptation Model. In this paper, we present the usage of semantic information of user"s ROI for transcoding and show our system implementation with experimental results.

Rapid Prototyping of Hydrologic Model Interfaces with IPython

NASA Astrophysics Data System (ADS)

Farthing, M. W.; Winters, K. D.; Ahmadia, A. J.; Hesser, T.; Howington, S. E.; Johnson, B. D.; Tate, J.; Kees, C. E.

2014-12-01

A significant gulf still exists between the state of practice and state of the art in hydrologic modeling. Part of this gulf is due to the lack of adequate pre- and post-processing tools for newly developed computational models. The development of user interfaces has traditionally lagged several years behind the development of a particular computational model or suite of models. As a result, models with mature interfaces often lack key advancements in model formulation, solution methods, and/or software design and technology. Part of the problem has been a focus on developing monolithic tools to provide comprehensive interfaces for the entire suite of model capabilities. Such efforts require expertise in software libraries and frameworks for creating user interfaces (e.g., Tcl/Tk, Qt, and MFC). These tools are complex and require significant investment in project resources (time and/or money) to use. Moreover, providing the required features for the entire range of possible applications and analyses creates a cumbersome interface. For a particular site or application, the modeling requirements may be simplified or at least narrowed, which can greatly reduce the number and complexity of options that need to be accessible to the user. However, monolithic tools usually are not adept at dynamically exposing specific workflows. Our approach is to deliver highly tailored interfaces to users. These interfaces may be site and/or process specific. As a result, we end up with many, customized interfaces rather than a single, general-use tool. For this approach to be successful, it must be efficient to create these tailored interfaces. We need technology for creating quality user interfaces that is accessible and has a low barrier for integration into model development efforts. Here, we present efforts to leverage IPython notebooks as tools for rapid prototyping of site and application-specific user interfaces. We provide specific examples from applications in near-shore environments as well as levee analysis. We discuss our design decisions and methodology for developing customized interfaces, strategies for delivery of the interfaces to users in various computing environments, as well as implications for the design/implementation of simulation models.

Factors affecting continued use of ceramic water purifiers distributed to tsunami-affected communities in Sri Lanka.

PubMed

Casanova, Lisa M; Walters, Adam; Naghawatte, Ajith; Sobsey, Mark D

2012-11-01

There is little information about continued use of point-of-use technologies after disaster relief efforts. After the 2004 tsunami, the Red Cross distributed ceramic water filters in Sri Lanka. This study determined factors associated with filter disuse and evaluate the quality of household drinking water. A cross-sectional survey of water sources and treatment, filter use and household characteristics was administered by in-person oral interview, and household water quality was tested. Multivariable logistic regression was used to model probability of filter non-use. At the time of survey, 24% of households (107/452) did not use filters; the most common reason given was breakage (42%). The most common household water sources were taps and wells. Wells were used by 45% of filter users and 28% of non-users. Of households with taps, 75% had source water Escherichia coli in the lowest World Health Organisation risk category (<1/100 ml), vs. only 30% of households reporting wells did. Tap households were approximately four times more likely to discontinue filter use than well households. After 2 years, 24% of households were non-users. The main factors were breakage and household water source; households with taps were more likely to stop use than households with wells. Tap water users also had higher-quality source water, suggesting that disuse is not necessarily negative and monitoring of water quality can aid decision-making about continued use. To promote continued use, disaster recovery filter distribution efforts must be joined with capacity building for long-term water monitoring, supply chains and local production. © 2012 Blackwell Publishing Ltd.

Modeling the time--varying subjective quality of HTTP video streams with rate adaptations.

PubMed

Chen, Chao; Choi, Lark Kwon; de Veciana, Gustavo; Caramanis, Constantine; Heath, Robert W; Bovik, Alan C

2014-05-01

Newly developed hypertext transfer protocol (HTTP)-based video streaming technologies enable flexible rate-adaptation under varying channel conditions. Accurately predicting the users' quality of experience (QoE) for rate-adaptive HTTP video streams is thus critical to achieve efficiency. An important aspect of understanding and modeling QoE is predicting the up-to-the-moment subjective quality of a video as it is played, which is difficult due to hysteresis effects and nonlinearities in human behavioral responses. This paper presents a Hammerstein-Wiener model for predicting the time-varying subjective quality (TVSQ) of rate-adaptive videos. To collect data for model parameterization and validation, a database of longer duration videos with time-varying distortions was built and the TVSQs of the videos were measured in a large-scale subjective study. The proposed method is able to reliably predict the TVSQ of rate adaptive videos. Since the Hammerstein-Wiener model has a very simple structure, the proposed method is suitable for online TVSQ prediction in HTTP-based streaming.

Providing assistive technology in Italy: the perceived delivery process quality as affecting abandonment.

PubMed

Federici, Stefano; Borsci, Simone

2016-01-01

The study brings together three aspects rarely observed at once in assistive technology (AT) surveys: (i) the assessment of user interaction/satisfaction with AT and service delivery, (ii) the motivational analysis of AT abandonment, and (iii) the management/design evaluation of AT delivery services. 15 health professionals and 4 AT experts were involved in modelling and assessing four AT Local Health Delivery Service (Centres) in Italy through a SWOT analysis and a Cognitive Walkthrough. In addition 558 users of the same Centres were interviewed in a telephone survey to rate their satisfaction and AT use. The overall AT abandonment was equal to 19.09%. Different Centres' management strategies resulted in different percentages of AT disuse, with a range from 12.61% to 24.26%. A significant difference between the declared abandonment and the Centres' management strategies (p = 0.012) was identified. A strong effect on abandonment was also found due to professionals' procedures (p = 0.005) and follow-up systems (p = 0.002). The user experience of an AT is affected not only by the quality of the interaction with the AT, but also by the perceived quality of the Centres in support and follow-up. Implications for Rehabilitation AT abandonment surveys provide useful information for modelling AT assessment and delivery process. SWOT and Cognitive Walkthrough analyses have shown suitable methods for exploring limits and advantages in AT service delivery systems. The study confirms the relevance of person centredness for a successful AT assessment and delivery process.

P-Care BPJS Acceptance Model in Primary Health Centers.

PubMed

Markam, Hosizah

2017-01-01

Electronic Medical Records (EMR) are increasingly adopted in healthcare facilities. Recently, implementation failure of electronic information systems is known to be caused by not only the quality of technical aspects, but also the user's behavior. It is known as applying the Technology Acceptance Model (TAM). This research aimed to analyze the acceptance model of p-care BPJS in the primary health centers. A total sample of 30 p-care BPJS users was drawn by multistage random sampling in which of these 30 primary health centers participated. Data analysis used both descriptive and inferential statistics. In the phase of structural model, it indicated that p-care BPJS acceptance model in the primary health centers was formed by Perceived Ease of Use (PEOU) and Perceived Usefulness (PU) through Attitude towards use of p-care BPJS and Behavioral Intention to use p-care BPJS.

A quality function deployment framework for the service quality of health information websites.

PubMed

Chang, Hyejung; Kim, Dohoon

2010-03-01

This research was conducted to identify both the users' service requirements on health information websites (HIWs) and the key functional elements for running HIWs. With the quality function deployment framework, the derived service attributes (SAs) are mapped into the suppliers' functional characteristics (FCs) to derive the most critical FCs for the users' satisfaction. Using the survey data from 228 respondents, the SAs, FCs and their relationships were analyzed using various multivariate statistical methods such as principal component factor analysis, discriminant analysis, correlation analysis, etc. Simple and compound FC priorities were derived by matrix calculation. Nine factors of SAs and five key features of FCs were identified, and these served as the basis for the house of quality model. Based on the compound FC priorities, the functional elements pertaining to security and privacy, and usage support should receive top priority in the course of enhancing HIWs. The quality function deployment framework can improve the FCs of the HIWs in an effective, structured manner, and it can also be utilized for critical success factors together with their strategic implications for enhancing the service quality of HIWs. Therefore, website managers could efficiently improve website operations by considering this study's results.

Determination of Appropriate Service Delivery Level for Quantitative Attributes of Household Toilets in Rural Settlements of India from Users' Perspective

NASA Astrophysics Data System (ADS)

Rashid, Mohammad; Pandit, Debapratim

2018-04-01

Improvement of quality of sanitation services in rural settlements is an important development goal in developing countries including India and accordingly several strategies are adopted which promote the demand and use of household toilets through creating awareness and providing subsidies to poor people for construction of household toilets with service-level standards specified from experts' perspective. In many cases, users are unsatisfied with the quality of toilets constructed using subsidies and the same remain unused. Users' satisfaction depends on their perceptions of service quality of individual attributes and overall service quality of the household toilets, which is an important determinant of sustainability and sustained use of toilets. This study aims to assess and benchmark the appropriate service delivery level for quantitative attributes of rural household toilets based on user perception. The service quality is determined with the help of level of service (LOS) scales developed using successive interval scaling technique, the zone of tolerance (ZOT), and users satisfaction level (USL) which relates service delivery levels with user satisfaction directly. The study finds that the service quality of most of the attributes of household toilets constructed using subsidies is perceived as poor. The results also suggest that most of the users expect to have a toilet with the service level of attributes ranging between LOS A and LOS B.

Determination of Appropriate Service Delivery Level for Quantitative Attributes of Household Toilets in Rural Settlements of India from Users' Perspective.

PubMed

Rashid, Mohammad; Pandit, Debapratim

2018-04-01

Improvement of quality of sanitation services in rural settlements is an important development goal in developing countries including India and accordingly several strategies are adopted which promote the demand and use of household toilets through creating awareness and providing subsidies to poor people for construction of household toilets with service-level standards specified from experts' perspective. In many cases, users are unsatisfied with the quality of toilets constructed using subsidies and the same remain unused. Users' satisfaction depends on their perceptions of service quality of individual attributes and overall service quality of the household toilets, which is an important determinant of sustainability and sustained use of toilets. This study aims to assess and benchmark the appropriate service delivery level for quantitative attributes of rural household toilets based on user perception. The service quality is determined with the help of level of service (LOS) scales developed using successive interval scaling technique, the zone of tolerance (ZOT), and users satisfaction level (USL) which relates service delivery levels with user satisfaction directly. The study finds that the service quality of most of the attributes of household toilets constructed using subsidies is perceived as poor. The results also suggest that most of the users expect to have a toilet with the service level of attributes ranging between LOS A and LOS B.

SARTools: A DESeq2- and EdgeR-Based R Pipeline for Comprehensive Differential Analysis of RNA-Seq Data.

PubMed

Varet, Hugo; Brillet-Guéguen, Loraine; Coppée, Jean-Yves; Dillies, Marie-Agnès

2016-01-01

Several R packages exist for the detection of differentially expressed genes from RNA-Seq data. The analysis process includes three main steps, namely normalization, dispersion estimation and test for differential expression. Quality control steps along this process are recommended but not mandatory, and failing to check the characteristics of the dataset may lead to spurious results. In addition, normalization methods and statistical models are not exchangeable across the packages without adequate transformations the users are often not aware of. Thus, dedicated analysis pipelines are needed to include systematic quality control steps and prevent errors from misusing the proposed methods. SARTools is an R pipeline for differential analysis of RNA-Seq count data. It can handle designs involving two or more conditions of a single biological factor with or without a blocking factor (such as a batch effect or a sample pairing). It is based on DESeq2 and edgeR and is composed of an R package and two R script templates (for DESeq2 and edgeR respectively). Tuning a small number of parameters and executing one of the R scripts, users have access to the full results of the analysis, including lists of differentially expressed genes and a HTML report that (i) displays diagnostic plots for quality control and model hypotheses checking and (ii) keeps track of the whole analysis process, parameter values and versions of the R packages used. SARTools provides systematic quality controls of the dataset as well as diagnostic plots that help to tune the model parameters. It gives access to the main parameters of DESeq2 and edgeR and prevents untrained users from misusing some functionalities of both packages. By keeping track of all the parameters of the analysis process it fits the requirements of reproducible research.

A User-Friendly Model for Spray Drying to Aid Pharmaceutical Product Development

PubMed Central

Grasmeijer, Niels; de Waard, Hans; Hinrichs, Wouter L. J.; Frijlink, Henderik W.

2013-01-01

The aim of this study was to develop a user-friendly model for spray drying that can aid in the development of a pharmaceutical product, by shifting from a trial-and-error towards a quality-by-design approach. To achieve this, a spray dryer model was developed in commercial and open source spreadsheet software. The output of the model was first fitted to the experimental output of a Büchi B-290 spray dryer and subsequently validated. The predicted outlet temperatures of the spray dryer model matched the experimental values very well over the entire range of spray dryer settings that were tested. Finally, the model was applied to produce glassy sugars by spray drying, an often used excipient in formulations of biopharmaceuticals. For the production of glassy sugars, the model was extended to predict the relative humidity at the outlet, which is not measured in the spray dryer by default. This extended model was then successfully used to predict whether specific settings were suitable for producing glassy trehalose and inulin by spray drying. In conclusion, a spray dryer model was developed that is able to predict the output parameters of the spray drying process. The model can aid the development of spray dried pharmaceutical products by shifting from a trial-and-error towards a quality-by-design approach. PMID:24040240

The adoption of Firm-Hosted Online Communities: an empirical investigation into the role of service quality and social interactions

NASA Astrophysics Data System (ADS)

Corkindale, David; Ram, Jiwat; Chen, Howard

2018-02-01

Online communities are a powerful device for collaborative creativity and innovation. Developments in Web 2.0 technologies have given rise to such interactions through firm-hosted online communities (FHOCs) - firm-run online information services that also provide self-help to a community. We devise a model that seeks to explain the factors that encourage people to become members of a FHOC and test the model using structural equation modelling based on data collected from 511 users of a FHOC. The study finds that: (a) an understanding of Perceived Usefulness (PU) plays a mediating role between Behavioural Intention (BI) to adopt FHOC and Trust, as well as Interface design; b) Networking among users has an indirect effect on BI; and c) design of the Interface has a direct influence on BI. A managerial implication is that Networking plays a role in the way supplementary services, including blogs and discussion forums, are perceived. Theoretically, when service quality is decomposed into components such as core services and supplementary services, it also positively influences PU.

A communication library for the parallelization of air quality models on structured grids

NASA Astrophysics Data System (ADS)

Miehe, Philipp; Sandu, Adrian; Carmichael, Gregory R.; Tang, Youhua; Dăescu, Dacian

PAQMSG is an MPI-based, Fortran 90 communication library for the parallelization of air quality models (AQMs) on structured grids. It consists of distribution, gathering and repartitioning routines for different domain decompositions implementing a master-worker strategy. The library is architecture and application independent and includes optimization strategies for different architectures. This paper presents the library from a user perspective. Results are shown from the parallelization of STEM-III on Beowulf clusters. The PAQMSG library is available on the web. The communication routines are easy to use, and should allow for an immediate parallelization of existing AQMs. PAQMSG can also be used for constructing new models.

CE-QUAL-RIV1: A Dynamic, One-Dimensional (Longitudinal) Water Quality Model for Streams. User’s Manual

DTIC Science & Technology

1990-11-01

Applying the chain rule: dB dB dH dB 1 (180) 95 It remains to calculate dBi/ dHi and dB i+1/dHi+ 1 . Now as calculation pro - ceeds from node to node...simulation models can be powerful tools for studying these issues. However, to be useful, the water quality model must be properly vuited for the problem...0 GN_1(QNANQN _1AN_ ) = 0 GN(QN,AN) = 0 (47) 44. The e. l solution of these nobi -e-.a. equations c .-n proceed in two ways. First the nonlinear terms

Developing a Dynamic SPARROW Water Quality Decision Support System Using NASA Remotely-Sensed Products

NASA Astrophysics Data System (ADS)

Al-Hamdan, M. Z.; Smith, R. A.; Hoos, A.; Schwarz, G. E.; Alexander, R. B.; Crosson, W. L.; Srikishen, J.; Estes, M., Jr.; Cruise, J.; Al-Hamdan, A.; Ellenburg, W. L., II; Flores, A.; Sanford, W. E.; Zell, W.; Reitz, M.; Miller, M. P.; Journey, C. A.; Befus, K. M.; Swann, R.; Herder, T.; Sherwood, E.; Leverone, J.; Shelton, M.; Smith, E. T.; Anastasiou, C. J.; Seachrist, J.; Hughes, A.; Graves, D.

2017-12-01

The USGS Spatially Referenced Regression on Watershed Attributes (SPARROW) surface water quality modeling system has been widely used for long term, steady state water quality analysis. However, users have increasingly requested a dynamic version of SPARROW that can provide seasonal estimates of nutrients and suspended sediment to receiving waters. The goal of this NASA-funded project is to develop a dynamic decision support system to enhance the southeast SPARROW water quality model and finer-scale dynamic models for selected coastal watersheds through the use of remotely-sensed data and other NASA Land Information System (LIS) products. The spatial and temporal scale of satellite remote sensing products and LIS modeling data make these sources ideal for the purposes of development and operation of the dynamic SPARROW model. Remote sensing products including MODIS vegetation indices, SMAP surface soil moisture, and OMI atmospheric chemistry along with LIS-derived evapotranspiration (ET) and soil temperature and moisture products will be included in model development and operation. MODIS data will also be used to map annual land cover/land use in the study areas and in conjunction with Landsat and Sentinel to identify disturbed areas that might be sources of sediment and increased phosphorus loading through exposure of the bare soil. These data and others constitute the independent variables in a regression analysis whose dependent variables are the water quality constituents total nitrogen, total phosphorus, and suspended sediment. Remotely-sensed variables such as vegetation indices and ET can be proxies for nutrient uptake by vegetation; MODIS Leaf Area Index can indicate sources of phosphorus from vegetation; soil moisture and temperature are known to control rates of denitrification; and bare soil areas serve as sources of enhanced nutrient and sediment production. The enhanced SPARROW dynamic models will provide improved tools for end users to manage water quality in near real time and for the formulation of future scenarios to inform strategic planning. Time-varying SPARROW outputs will aid water managers in decision making regarding allocation of resources in protecting aquatic habitats, planning for harmful algal blooms, and restoration of degraded habitats, stream segments, or lakes.

Coordinating Council. Fifth Meeting: Quality

NASA Technical Reports Server (NTRS)

1991-01-01

This NASA Scientific and Technical Information Program Coordinating Council meeting had a theme of Quality. Four presentations were made with the following titles: How much quality can you pay for?, What the Center for AeroSpace Information has done to improve quality, Quality from the user standpoint, and Database quality: user views test producer perception. Visuals as well as discussion summaries are also included.

A Quality Screening Service for Remote Sensing Data

NASA Technical Reports Server (NTRS)

Lynnes, Christopher; Olsen, Edward; Fox, Peter; Vollmer, Bruce; Wolfe, Robert; Samadi, Shahin

2010-01-01

NASA provides a wide variety of Earth-observing satellite data products to a diverse community. These data are annotated with quality information in a variety of ways, with the result that many users struggle to understand how to properly account for quality when dealing with satellite data. To address this issue, a Data Quality Screening Service (DQSS) is being implemented for a number of datasets. The DQSS will enable users to obtain data files in which low-quality pixels have been filtered out, based either on quality criteria recommended by the science team or on the user s particular quality criteria. The objective is to increase proper utilization of this critical quality data in science data analysis of satellite data products.

Health care public reporting utilization - user clusters, web trails, and usage barriers on Germany's public reporting portal Weisse-Liste.de.

PubMed

Pross, Christoph; Averdunk, Lars-Henrik; Stjepanovic, Josip; Busse, Reinhard; Geissler, Alexander

2017-04-21

Quality of care public reporting provides structural, process and outcome information to facilitate hospital choice and strengthen quality competition. Yet, evidence indicates that patients rarely use this information in their decision-making, due to limited awareness of the data and complex and conflicting information. While there is enthusiasm among policy makers for public reporting, clinicians and researchers doubt its overall impact. Almost no study has analyzed how users behave on public reporting portals, which information they seek out and when they abort their search. This study employs web-usage mining techniques on server log data of 17 million user actions from Germany's premier provider transparency portal Weisse-Liste.de (WL.de) between 2012 and 2015. Postal code and ICD search requests facilitate identification of geographical and treatment area usage patterns. User clustering helps to identify user types based on parameters like session length, referrer and page topic visited. First-level markov chains illustrate common click paths and premature exits. In 2015, the WL.de Hospital Search portal had 2,750 daily users, with 25% mobile traffic, a bounce rate of 38% and 48% of users examining hospital quality information. From 2013 to 2015, user traffic grew at 38% annually. On average users spent 7 min on the portal, with 7.4 clicks and 54 s between clicks. Users request information for many oncologic and orthopedic conditions, for which no process or outcome quality indicators are available. Ten distinct user types, with particular usage patterns and interests, are identified. In particular, the different types of professional and non-professional users need to be addressed differently to avoid high premature exit rates at several key steps in the information search and view process. Of all users, 37% enter hospital information correctly upon entry, while 47% require support in their hospital search. Several onsite and offsite improvement options are identified. Public reporting needs to be directed at the interests of its users, with more outcome quality information for oncology and orthopedics. Customized reporting can cater to the different needs and skill levels of professional and non-professional users. Search engine optimization and hospital quality advocacy can increase website traffic.

[Patient satisfaction survey and the place of users in the Oran university hospital quality project].

PubMed

Chougrani, Saada; Ouhadj, Salah

2014-01-01

Quality of care is a strategic priority of any management approach in order to meet users' expectations of health care systems. This study tried to define the role of patient satisfaction surveys and the place of user in the quality of care project. The results of patient satisfaction surveys conducted between 2010 and 2012 and the draft quality of care project were analysed. Patient satisfaction surveys from 2010 to 2012 focused on logistic shortcomings. No comment was formulated about health care. Comments and suggestions did not provide any contribution in terms of patient involvement in the health care process. The multiple perspectives of quality of care include clinical care and other social objectives of respect for the individual and attention to the patient. User satisfaction as assessed by patient satisfaction surveys or patients' experiences only reflect the health professionals' representation. However, the objective is to measure what the user perceives and feels and his/her representation of the attention provided. These approaches, conducted outside of the quality of care strategic plan, only provide a basis for actions with limited or no effectiveness.

Interactive Inverse Groundwater Modeling - Addressing User Fatigue

NASA Astrophysics Data System (ADS)

Singh, A.; Minsker, B. S.

2006-12-01

This paper builds on ongoing research on developing an interactive and multi-objective framework to solve the groundwater inverse problem. In this work we solve the classic groundwater inverse problem of estimating a spatially continuous conductivity field, given field measurements of hydraulic heads. The proposed framework is based on an interactive multi-objective genetic algorithm (IMOGA) that not only considers quantitative measures such as calibration error and degree of regularization, but also takes into account expert knowledge about the structure of the underlying conductivity field expressed as subjective rankings of potential conductivity fields by the expert. The IMOGA converges to the optimal Pareto front representing the best trade- off among the qualitative as well as quantitative objectives. However, since the IMOGA is a population-based iterative search it requires the user to evaluate hundreds of solutions. This leads to the problem of 'user fatigue'. We propose a two step methodology to combat user fatigue in such interactive systems. The first step is choosing only a few highly representative solutions to be shown to the expert for ranking. Spatial clustering is used to group the search space based on the similarity of the conductivity fields. Sampling is then carried out from different clusters to improve the diversity of solutions shown to the user. Once the expert has ranked representative solutions from each cluster a machine learning model is used to 'learn user preference' and extrapolate these for the solutions not ranked by the expert. We investigate different machine learning models such as Decision Trees, Bayesian learning model, and instance based weighting to model user preference. In addition, we also investigate ways to improve the performance of these models by providing information about the spatial structure of the conductivity fields (which is what the expert bases his or her rank on). Results are shown for each of these machine learning models and the advantages and disadvantages for each approach are discussed. These results indicate that using the proposed two-step methodology leads to significant reduction in user-fatigue without deteriorating the solution quality of the IMOGA.

Save medical personnel's time by improved user interfaces.

PubMed

Kindler, H

1997-01-01

Common objectives in the industrial countries are the improvement of quality of care, clinical effectiveness, and cost control. Cost control, in particular, has been addressed through the introduction of case mix systems for reimbursement by social-security institutions. More data is required to enable quality improvement, increases in clinical effectiveness and for juridical reasons. At first glance, this documentation effort is contradictory to cost reduction. However, integrated services for resource management based on better documentation should help to reduce costs. The clerical effort for documentation should be decreased by providing a co-operative working environment for healthcare professionals applying sophisticated human-computer interface technology. Additional services, e.g., automatic report generation, increase the efficiency of healthcare personnel. Modelling the medical work flow forms an essential prerequisite for integrated resource management services and for co-operative user interfaces. A user interface aware of the work flow provides intelligent assistance by offering the appropriate tools at the right moment. Nowadays there is a trend to client/server systems with relational databases or object-oriented databases as repository. The work flows used for controlling purposes and to steer the user interfaces must be represented in the repository.

Validating the southern variant forest vegetation simulator height predictions on southeastern hardwoods in Kentucky and Tennessee

Treesearch

Bernard R. Parresol; Steven C. Stedman

2004-01-01

The accuracy of forest growth and yield forecasts affects the quality of forest management decisions (Rauscher et al. 2000). Users of growth and yield models want assurance that model outputs are reasonable and mimic local/regional forest structure and composition and accurately reflect the influences of stand dynamics such as competition and disturbance. As such,...

Engineering Quality Software: 10 Recommendations for Improved Software Quality Management

DTIC Science & Technology

2010-04-27

lack of user involvement • Inadequate Software Process Management & Control By Contractors • No “Team” of Vendors and users; little SME participation...1990 Quality Perspectives • Process Quality ( CMMI ) • Product Quality (ISO/IEC 2500x) – Internal Quality Attributes – External Quality Attributes... CMMI /ISO 9000 Assessments – Capture organizational knowledge • Identify best practices, lessons learned Know where you are, and where you need to be

Reduced-form air quality modeling for community-scale ...

EPA Pesticide Factsheets

Transportation plays an important role in modern society, but its impact on air quality has been shown to have significant adverse effects on public health. Numerous reviews (HEI, CDC, WHO) summarizing findings of hundreds of studies conducted mainly in the last decade, conclude that exposures to traffic emissions near roads are a public health concern. The Community LINE Source Model (C-LINE) is a web-based model designed to inform the community user of local air quality impacts due to roadway vehicles in their region of interest using a simplified modeling approach. Reduced-form air quality modeling is a useful tool for examining what-if scenarios of changes in emissions, such as those due to changes in traffic volume, fleet mix, or vehicle speed. Examining various scenarios of air quality impacts in this way can identify potentially at-risk populations located near roadways, and the effects that a change in traffic activity may have on them. C-LINE computes dispersion of primary mobile source pollutants using meteorological conditions for the region of interest and computes air-quality concentrations corresponding to these selected conditions. C-LINE functionality has been expanded to model emissions from port-related activities (e.g. ships, trucks, cranes, etc.) in a reduced-form modeling system for local-scale near-port air quality analysis. This presentation describes the Community modeling tools C-LINE and C-PORT that are intended to be used by local gove

Models of Dynamic Relations Among Service Activities, System State and Service Quality on Computer and Network Systems

DTIC Science & Technology

2010-01-01

Service quality on computer and network systems has become increasingly important as many conventional service transactions are moved online. Service quality of computer and network services can be measured by the performance of the service process in throughput, delay, and so on. On a computer and network system, competing service requests of users and associated service activities change the state of limited system resources which in turn affects the achieved service ...relations of service activities, system state and service

TOOKUIL: A case study in user interface development for safety code application

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gray, D.L.; Harkins, C.K.; Hoole, J.G.

1997-07-01

Traditionally, there has been a very high learning curve associated with using nuclear power plant (NPP) analysis codes. Even for seasoned plant analysts and engineers, the process of building or modifying an input model for present day NPP analysis codes is tedious, error prone, and time consuming. Current cost constraints and performance demands place an additional burden on today`s safety analysis community. Advances in graphical user interface (GUI) technology have been applied to obtain significant productivity and quality assurance improvements for the Transient Reactor Analysis Code (TRAC) input model development. KAPL Inc. has developed an X Windows-based graphical user interfacemore » named TOOKUIL which supports the design and analysis process, acting as a preprocessor, runtime editor, help system, and post processor for TRAC. This paper summarizes the objectives of the project, the GUI development process and experiences, and the resulting end product, TOOKUIL.« less

Economic Feasibility of Wireless Sensor Network-Based Service Provision in a Duopoly Setting with a Monopolist Operator

PubMed Central

Romero, Julián; Sacoto-Cabrera, Erwin J.

2017-01-01

We analyze the feasibility of providing Wireless Sensor Network-data-based services in an Internet of Things scenario from an economical point of view. The scenario has two competing service providers with their own private sensor networks, a network operator and final users. The scenario is analyzed as two games using game theory. In the first game, sensors decide to subscribe or not to the network operator to upload the collected sensing-data, based on a utility function related to the mean service time and the price charged by the operator. In the second game, users decide to subscribe or not to the sensor-data-based service of the service providers based on a Logit discrete choice model related to the quality of the data collected and the subscription price. The sinks and users subscription stages are analyzed using population games and discrete choice models, while network operator and service providers pricing stages are analyzed using optimization and Nash equilibrium concepts respectively. The model is shown feasible from an economic point of view for all the actors if there are enough interested final users and opens the possibility of developing more efficient models with different types of services. PMID:29186847

Modeling methylene chloride exposure-reduction options for home paint-stripper users.

PubMed

Riley, D M; Small, M J; Fischhoff, B

2000-01-01

Home improvement is a popular activity, but one that can also involve exposure to hazardous substances. Paint stripping is of particular concern because of the high potential exposures to methylene chloride, a solvent that is a potential human carcinogen and neurotoxicant. This article presents a general methodology for evaluating the effectiveness of behavioral interventions for reducing these risks. It doubles as a model that assesses exposure patterns, incorporating user time-activity patterns and risk-mitigation strategies. The model draws upon recent innovations in indoor air-quality modeling to estimate exposure through inhalation and dermal pathways to paint-stripper users. It is designed to use data gathered from home paint-stripper users about room characteristics, amount of stripper used, time-activity patterns and exposure-reduction strategies (e.g., increased ventilation and modification in the timing of stripper application, scraping, and breaks). Results indicate that the effectiveness of behavioral interventions depends strongly on characteristics of the room (e.g., size, number and size of doors and windows, base air-exchange rates). The greatest simple reduction in exposure is achieved by using an exhaust fan in addition to opening windows and doors. These results can help identify the most important information for product labels and other risk-communication materials.

User-Centered Design Practices to Redesign a Nursing e-Chart in Line with the Nursing Process.

PubMed

Schachner, María B; Recondo, Francisco J; González, Zulma A; Sommer, Janine A; Stanziola, Enrique; Gassino, Fernando D; Simón, Mariana; López, Gastón E; Benítez, Sonia E

2016-01-01

Regarding the user-centered design (UCD) practices carried out at Hospital Italiano of Buenos Aires, nursing e-chart user interface was redesigned in order to improve records' quality of nursing process based on an adapted Virginia Henderson theoretical model and patient safety standards to fulfil Joint Commission accreditation requirements. UCD practices were applied as standardized and recommended for electronic medical records usability evaluation. Implementation of these practices yielded a series of prototypes in 5 iterative cycles of incremental improvements to achieve goals of usability which were used and perceived as satisfactory by general care nurses. Nurses' involvement allowed balance between their needs and institution requirements.

What is quality in assisted living technology? The ARCHIE framework for effective telehealth and telecare services.

PubMed

Greenhalgh, Trisha; Procter, Rob; Wherton, Joe; Sugarhood, Paul; Hinder, Sue; Rouncefield, Mark

2015-04-23

We sought to define quality in telehealth and telecare with the aim of improving the proportion of patients who receive appropriate, acceptable and workable technologies and services to support them living with illness or disability. This was a three-phase study: (1) interviews with seven technology suppliers and 14 service providers, (2) ethnographic case studies of 40 people, 60 to 98 years old, with multi-morbidity and assisted living needs and (3) 10 co-design workshops. In phase 1, we explored barriers to uptake of telehealth and telecare. In phase 2, we used ethnographic methods to build a detailed picture of participants' lives, illness experiences and technology use. In phase 3, we brought users and their carers together with suppliers and providers to derive quality principles for assistive technology products and services. Interviews identified practical, material and organisational barriers to smooth introduction and continued support of assistive technologies. The experience of multi-morbidity was characterised by multiple, mutually reinforcing and inexorably worsening impairments, producing diverse and unique care challenges. Participants and their carers managed these pragmatically, obtaining technologies and adapting the home. Installed technologies were rarely fit for purpose. Support services for technologies made high (and sometimes oppressive) demands on users. Six principles emerged from the workshops. Quality telehealth or telecare is 1) ANCHORED in a shared understanding of what matters to the user; 2) REALISTIC about the natural history of illness; 3) CO-CREATIVE, evolving and adapting solutions with users; 4) HUMAN, supported through interpersonal relationships and social networks; 5) INTEGRATED, through attention to mutual awareness and knowledge sharing; 6) EVALUATED to drive system learning. Technological advances are important, but must be underpinned by industry and service providers following a user-centred approach to design and delivery. For the ARCHIE principles to be realised, the sector requires: (1) a shift in focus from product ('assistive technologies') to performance ('supporting technologies-in-use'); (2) a shift in the commissioning model from standardised to personalised home care contracts; and (3) a shift in the design model from 'walled garden', branded products to inter-operable components that can be combined and used flexibly across devices and platforms. Please see related article: http://dx.doi.org/10.1186/s12916-015-0305-8.

Social image quality

NASA Astrophysics Data System (ADS)

Qiu, Guoping; Kheiri, Ahmed

2011-01-01

Current subjective image quality assessments have been developed in the laboratory environments, under controlledconditions, and are dependent on the participation of limited numbers of observers. In this research, with the help of Web 2.0 and social media technology, a new method for building a subjective image quality metric has been developed where the observers are the Internet users. A website with a simple user interface that enables Internet users from anywhere at any time to vote for a better quality version of a pair of the same image has been constructed. Users' votes are recorded and used to rank the images according to their perceived visual qualities. We have developed three rank aggregation algorithms to process the recorded pair comparison data, the first uses a naive approach, the second employs a Condorcet method, and the third uses the Dykstra's extension of Bradley-Terry method. The website has been collecting data for about three months and has accumulated over 10,000 votes at the time of writing this paper. Results show that the Internet and its allied technologies such as crowdsourcing offer a promising new paradigm for image and video quality assessment where hundreds of thousands of Internet users can contribute to building more robust image quality metrics. We have made Internet user generated social image quality (SIQ) data of a public image database available online (http://www.hdri.cs.nott.ac.uk/siq/) to provide the image quality research community with a new source of ground truth data. The website continues to collect votes and will include more public image databases and will also be extended to include videos to collect social video quality (SVQ) data. All data will be public available on the website in due course.

Users' acceptance and attitude in regarding electronic medical record at central polyclinic of oil industry in Isfahan, Iran.

PubMed

Tavakoli, Nahid; Shahin, Arash; Jahanbakhsh, Maryam; Mokhtari, Habibollah; Rafiei, Maryam

2013-01-01

Simultaneous with the rapid changes in the technology and information systems, hospitals interest in using them. One of the most common systems in hospitals is electronic medical record (EMR) whose one of uses is providing better health care quality via health information technology. Prior to its use, attempts should be put to identifying factors affecting the acceptance, attitude and utilizing of this technology. The current article aimed to study the effective factors of EMR acceptance by technology acceptance model (TAM) at central polyclinic of Oil Industry in Isfahan. This was a practical, descriptive and regression study. The population research were all EMR users at polyclinic of Oil Industry in 2012 and its sampling was simple random with 62 users. The tool of data collection was a research-made questionnaire based on TAM. The validity of questionnaire has been assigned through the strategy of content validity and health information technology experts' views and its reliability by test-retest. The system users have positive attitude toward using EMR (56.6%). Also, users are not very satisfied with effective external (38.14%) and behavioral factors (47.8%) upon using the system. Perceived ease-of-use (PEU) and perceived usefulness (PU) were at a good level. Lack of relative satisfaction with using of EMR derives from factors such as appearance, screen, data and information quality and terminology. In this study, it is suggested to improve the system and the efficiency of the users through software' external factors development. So that PEU and users' attitude to be changed and moved in positive manner.

[Quality planning of Family Health Units using Quality Function Deployment (QFD)].

PubMed

Volpato, Luciana Fernandes; Meneghim, Marcelo de Castro; Pereira, Antonio Carlos; Ambrosano, Gláucia Maria Bovi

2010-08-01

Quality is an indispensible requirement in the health field, and its pursuit is necessary in order to meet demands by a population that is aware of its rights, as part of the essence of good work relations, and to decrease technological costs. Quality thus involves all parties to the process (users and professionals), and is no longer merely an attribute of the health service. This study aimed to verify the possibility of quality planning in the Family Health Units, using Quality Function Deployment (QFD). QFD plans quality according to user satisfaction, involving staff professionals and identifying new approaches to improve work processes. Development of the array, called the House of Quality, is this method's most important characteristics. The results show a similarity between the quality demanded by users and the quality planned by professionals. The current study showed that QFD is an efficient tool for quality planning in public health services.

A study on real-time low-quality content detection on Twitter from the users' perspective.

PubMed

Chen, Weiling; Yeo, Chai Kiat; Lau, Chiew Tong; Lee, Bu Sung

2017-01-01

Detection techniques of malicious content such as spam and phishing on Online Social Networks (OSN) are common with little attention paid to other types of low-quality content which actually impacts users' content browsing experience most. The aim of our work is to detect low-quality content from the users' perspective in real time. To define low-quality content comprehensibly, Expectation Maximization (EM) algorithm is first used to coarsely classify low-quality tweets into four categories. Based on this preliminary study, a survey is carefully designed to gather users' opinions on different categories of low-quality content. Both direct and indirect features including newly proposed features are identified to characterize all types of low-quality content. We then further combine word level analysis with the identified features and build a keyword blacklist dictionary to improve the detection performance. We manually label an extensive Twitter dataset of 100,000 tweets and perform low-quality content detection in real time based on the characterized significant features and word level analysis. The results of our research show that our method has a high accuracy of 0.9711 and a good F1 of 0.8379 based on a random forest classifier with real time performance in the detection of low-quality content in tweets. Our work therefore achieves a positive impact in improving user experience in browsing social media content.

Service user experiences of specialist mental health supported accommodation: A systematic review of qualitative studies and narrative synthesis.

PubMed

Krotofil, Joanna; McPherson, Peter; Killaspy, Helen

2018-04-02

Specialist supported accommodation services have become a key component of most community-based mental healthcare systems. While mental health policies highlight the importance of service user involvement in service development and care planning, there are no comprehensive literature reviews synthesising services users' perspectives on, or experiences of, supported accommodation services. This systematic review was undertaken to fill this gap. We searched electronic databases (January 2015, updated June 2017), conducted hand searches and used forward-backward snowballing to identify 13,678 papers. We inspected the full-text of 110 papers and included 50 of these in the final review. Data extraction and quality assessments were conducted. We used narrative synthesis to develop a conceptual model of service users' experiences that included structural, process, relational and contextual factors, such as the characteristics of the service, relationships with staff and other service users, the intensity and nature of support, the physical environment, and social and community integration. The review highlights the complex interplay of individual, service-level and community factors in shaping the lived experience of service users and their impact on personal identity and recovery. Our approach addressed some of the widely reported limitations of the quantitative research in this field, providing a conceptual model relevant to service user experiences across supported accommodation service types, population groups and countries. © 2018 John Wiley & Sons Ltd.

Design of a Golf Swing Injury Detection and Evaluation open service platform with Ontology-oriented clustering case-based reasoning mechanism.

PubMed

Ku, Hao-Hsiang

2015-01-01

Nowadays, people can easily use a smartphone to get wanted information and requested services. Hence, this study designs and proposes a Golf Swing Injury Detection and Evaluation open service platform with Ontology-oritened clustering case-based reasoning mechanism, which is called GoSIDE, based on Arduino and Open Service Gateway initative (OSGi). GoSIDE is a three-tier architecture, which is composed of Mobile Users, Application Servers and a Cloud-based Digital Convergence Server. A mobile user is with a smartphone and Kinect sensors to detect the user's Golf swing actions and to interact with iDTV. An application server is with Intelligent Golf Swing Posture Analysis Model (iGoSPAM) to check a user's Golf swing actions and to alter this user when he is with error actions. Cloud-based Digital Convergence Server is with Ontology-oriented Clustering Case-based Reasoning (CBR) for Quality of Experiences (OCC4QoE), which is designed to provide QoE services by QoE-based Ontology strategies, rules and events for this user. Furthermore, GoSIDE will automatically trigger OCC4QoE and deliver popular rules for a new user. Experiment results illustrate that GoSIDE can provide appropriate detections for Golfers. Finally, GoSIDE can be a reference model for researchers and engineers.

Hydrodynamics and Water Quality forecasting over a Cloud Computing environment: INDIGO-DataCloud

NASA Astrophysics Data System (ADS)

Aguilar Gómez, Fernando; de Lucas, Jesús Marco; García, Daniel; Monteoliva, Agustín

2017-04-01

Algae Bloom due to eutrophication is an extended problem for water reservoirs and lakes that impacts directly in water quality. It can create a dead zone that lacks enough oxygen to support life and it can also be human harmful, so it must be controlled in water masses for supplying, bathing or other uses. Hydrodynamic and Water Quality modelling can contribute to forecast the status of the water system in order to alert authorities before an algae bloom event occurs. It can be used to predict scenarios and find solutions to reduce the harmful impact of the blooms. High resolution models need to process a big amount of data using a robust enough computing infrastructure. INDIGO-DataCloud (https://www.indigo-datacloud.eu/) is an European Commission funded project that aims at developing a data and computing platform targeting scientific communities, deployable on multiple hardware and provisioned over hybrid (private or public) e-infrastructures. The project addresses the development of solutions for different Case Studies using different Cloud-based alternatives. In the first INDIGO software release, a set of components are ready to manage the deployment of services to perform N number of Delft3D simulations (for calibrating or scenario definition) over a Cloud Computing environment, using the Docker technology: TOSCA requirement description, Docker repository, Orchestrator, AAI (Authorization, Authentication) and OneData (Distributed Storage System). Moreover, the Future Gateway portal based on Liferay, provides an user-friendly interface where the user can configure the simulations. Due to the data approach of INDIGO, the developed solutions can contribute to manage the full data life cycle of a project, thanks to different tools to manage datasets or even metadata. Furthermore, the cloud environment contributes to provide a dynamic, scalable and easy-to-use framework for non-IT experts users. This framework is potentially capable to automatize the processing of forecasting applying periodic tasks. For instance, a user can forecast every month the hydrodynamics and water quality status of a reservoir starting from a base model and supplying new data gathered from the instrumentation or observations. This interactive presentation aims to show the use of INDIGO solutions in a particular forecasting use case and to inspire others in the use of a Cloud framework for their applications.

Online Video-Based Training in the Use of Hydrologic Models: A Case Example Using SWAT

NASA Astrophysics Data System (ADS)

Frankenberger, J.

2009-12-01

Hydrologic models are increasingly important tools in public decision-making. For example, watershed models are used to develop Total Maximum Daily Load (TMDL) plans, quantify pollutant loads, and estimate the effects of watershed restoration efforts funded by the public. One widely-used tool is the Soil and Water Assessment Tool (SWAT), which has been applied by state and federal agencies, consultants, and university researchers to assess sources of nonpoint source pollution and the effects of potential solutions, and used in testimony in at least one lawsuit. The SWAT model has the capability to evaluate the relative effects of different management scenarios on water quality, sediment, and agricultural chemical yield at the watershed scale. As with all models, the model user and the decisions that s/he makes in the modeling process are important determinants of model performance. The SWAT model has an open structure, leaving most decisions up to the model user, which was especially appropriate when the model was primarily used in research by highly-experienced modelers. However, as the model has become more widely applied in planning and assessment, by people who may have limited hydrology background and modeling knowledge, the possibility that users may be using the model inconsistently or even incorrectly becomes a concern. Consistent training can lead to a minimum standard of knowledge that model users are expected to have, and therefore to higher use of best practices in modeling efforts. In addition, widespread availability of training can lead to better decisions about when and where using the model is appropriate, and what level of data needs to be available for confidence in predictions. Currently, most training in model use takes place in occasional face-to-face workshops, courses offered at a few universities, and a short tutorial available in the manual. Many new users simply acquire the model and learn from the manual, other users, trial and error, and posing questions to the web-based group. Although excellent model documentation is available (http://www.brc.tamus.edu/swat/), the extent to which users conduct careful study to ensure that their understanding goes beyond the superficial level is unknown. Online video-on-demand technology provides a way for users to learn consistent content while saving travel resources, and allows for training to fit into people’s schedule. Online videos were created to teach the basics of setting up the model, acquiring input data, parameterizing, calibrating and evaluating model results, and analyzing outputs, as well as model science, uncertainty, and appropriate use. Feedback was sought from the SWAT modeling community to determine typical backgrounds of model users and how the video training fits into the available means of learning SWAT. Evaluation is being undertaken to assess results. The processes used in developing and evaluating the online SWAT training could be applied to other computer models for which use among broader groups of people is increasing or has the potential to grow.

[A survey about quality of care and user’s' rights in Chilean psychiatric services].

PubMed

Minoletti, Alberto; Toro, Olga; Alvarado, Rubén; Carniglia, Claudia; Guajardo, Alejandro; Rayo, Ximena

2015-12-01

Quality of care and respect for the rights of users are critical to achieve positive health outcomes and respond appropriately to the expectations of people, particularly if they have mental illnesses. To carry out a baseline diagnosis of quality of care and respect for rights in public outpatient psychiatric services. Quality of care and respect for patients'’ rights was assessed by a mental health professional and a trained psychiatric service user in 15 ambulatory psychiatric services. The WHO QualityRights instrument was used, reviewing documentation and making observations in each facility, as well as interviewing 146 patients, 148 health care workers and 64 relatives of patients. A high level of achievement was accomplished in terms of discrimination-free health care, availability of psychotropic medications, lack of abuse or neglect and use of informed consents. A low level of achievement was found in terms of user support to cope with community living, access to education or work and participation in community activities, respect for user treatment preferences and preventive measures to avoid maltreatment and cruelty. Chile could improve the performance of psychiatry services having laws based on the “Convention of Rights of Persons with Disabilities” and standards of the World Health Organization, having national policies about quality of care and rights of users, reinforcing the community work of mental health care teams, reinforcing and informing users about their rights and promoting research on interventions to improve the respect of their rights.

Electronic Medical Record in Central Polyclinic of Isfahan Oil Industry: A Case Study Based on Technology Acceptance Model

PubMed Central

Tavakoli, Nahid; Jahanbakhsh, Maryam; Shahin, Arash; Mokhtari, Habibollah; Rafiei, Maryam

2013-01-01

Introduction Today, health information technologies are base of health services and Electronic Medical Record is one of them. The purpose of this paper is to investigate the Technology Acceptance Model (TAM) on EMR at Central Polyclinic Oil Industry that is a pioneer in implementation of EMR in Isfahan. Methods This study was an applied and analytical survey that it was done at the Central Polyclinic Oil Industry. Because statistical population were limited, sampling bas been done by conducting the census and the sample was according to the population. The data was collected by a researcher-made questionnaire that it was validated by experts and its reliability was confirmed by test retest. The questionnaire was developed in 5 scopes including external factors (data quality and user interface), perceived usefulness, perceived ease of usefulness, attitude toward using, and behavioral intention to use. The Results analyzed by SPSS. Results There was a significant relationship between data quality with PU(r=/295, p/005). Discussion The survey of the scopes in the polyclinic showed that there is relationship among user interface, perceived usefulness, perceived ease of usefulness, attitude toward using, and behavioral intention to use, but data quality has no relationship with attitude. It seems the system designers didn’t consider to data quality characteristics. It is proposed that they consult with health information management professionals for improvement the existing system. PMID:23572857

Electronic medical record in central polyclinic of isfahan oil industry: a case study based on technology acceptance model.

PubMed

Tavakoli, Nahid; Jahanbakhsh, Maryam; Shahin, Arash; Mokhtari, Habibollah; Rafiei, Maryam

2013-03-01

Today, health information technologies are base of health services and Electronic Medical Record is one of them. The purpose of this paper is to investigate the Technology Acceptance Model (TAM) on EMR at Central Polyclinic Oil Industry that is a pioneer in implementation of EMR in Isfahan. This study was an applied and analytical survey that it was done at the Central Polyclinic Oil Industry. Because statistical population were limited, sampling bas been done by conducting the census and the sample was according to the population. The data was collected by a researcher-made questionnaire that it was validated by experts and its reliability was confirmed by test retest. The questionnaire was developed in 5 scopes including external factors (data quality and user interface), perceived usefulness, perceived ease of usefulness, attitude toward using, and behavioral intention to use. The Results analyzed by SPSS. There was a significant relationship between data quality with PU(r=/295, p/005). The survey of the scopes in the polyclinic showed that there is relationship among user interface, perceived usefulness, perceived ease of usefulness, attitude toward using, and behavioral intention to use, but data quality has no relationship with attitude. It seems the system designers didn't consider to data quality characteristics. It is proposed that they consult with health information management professionals for improvement the existing system.

Image-Based Medical Expert Teleconsultation in Acute Care of Injuries. A Systematic Review of Effects on Information Accuracy, Diagnostic Validity, Clinical Outcome, and User Satisfaction

PubMed Central

Hasselberg, Marie; Beer, Netta; Blom, Lisa; Wallis, Lee A.; Laflamme, Lucie

2014-01-01

Objective To systematically review the literature on image-based telemedicine for medical expert consultation in acute care of injuries, considering system, user, and clinical aspects. Design Systematic review of peer-reviewed journal articles. Data sources Searches of five databases and in eligible articles, relevant reviews, and specialized peer-reviewed journals. Eligibility criteria Studies were included that covered teleconsultation systems based on image capture and transfer with the objective of seeking medical expertise for the diagnostic and treatment of acute injury care and that presented the evaluation of one or several aspects of the system based on empirical data. Studies of systems not under routine practice or including real-time interactive video conferencing were excluded. Method The procedures used in this review followed the PRISMA Statement. Predefined criteria were used for the assessment of the risk of bias. The DeLone and McLean Information System Success Model was used as a framework to synthesise the results according to system quality, user satisfaction, information quality and net benefits. All data extractions were done by at least two reviewers independently. Results Out of 331 articles, 24 were found eligible. Diagnostic validity and management outcomes were often studied; fewer studies focused on system quality and user satisfaction. Most systems were evaluated at a feasibility stage or during small-scale pilot testing. Although the results of the evaluations were generally positive, biases in the methodology of evaluation were concerning selection, performance and exclusion. Gold standards and statistical tests were not always used when assessing diagnostic validity and patient management. Conclusions Image-based telemedicine systems for injury emergency care tend to support valid diagnosis and influence patient management. The evidence relates to a few clinical fields, and has substantial methodological shortcomings. As in the case of telemedicine in general, user and system quality aspects are poorly documented, both of which affect scale up of such programs. PMID:24887257

A bipartite fitness model for online music streaming services

NASA Astrophysics Data System (ADS)

Pongnumkul, Suchit; Motohashi, Kazuyuki

2018-01-01

This paper proposes an evolution model and an analysis of the behavior of music consumers on online music streaming services. While previous studies have observed power-law degree distributions of usage in online music streaming services, the underlying behavior of users has not been well understood. Users and songs can be described using a bipartite network where an edge exists between a user node and a song node when the user has listened that song. The growth mechanism of bipartite networks has been used to understand the evolution of online bipartite networks Zhang et al. (2013). Existing bipartite models are based on a preferential attachment mechanism László Barabási and Albert (1999) in which the probability that a user listens to a song is proportional to its current popularity. This mechanism does not allow for two types of real world phenomena. First, a newly released song with high quality sometimes quickly gains popularity. Second, the popularity of songs normally decreases as time goes by. Therefore, this paper proposes a new model that is more suitable for online music services by adding fitness and aging functions to the song nodes of the bipartite network proposed by Zhang et al. (2013). Theoretical analyses are performed for the degree distribution of songs. Empirical data from an online streaming service, Last.fm, are used to confirm the degree distribution of the object nodes. Simulation results show improvements from a previous model. Finally, to illustrate the application of the proposed model, a simplified royalty cost model for online music services is used to demonstrate how the changes in the proposed parameters can affect the costs for online music streaming providers. Managerial implications are also discussed.

Support for Quality Assurance in End-User Systems.

ERIC Educational Resources Information Center

Klepper, Robert; McKenna, Edward G.

1989-01-01

Suggests an approach that organizations can take to provide centralized support services for quality assurance in end-user information systems, based on the experiences of a support group at Citicorp Mortgage, Inc. The functions of the support group include user education, software selection, and assistance in testing, implementation, and support…

Non-Academic Service Quality: Comparative Analysis of Students and Faculty as Users

ERIC Educational Resources Information Center

Sharif, Khurram; Kassim, Norizan Mohd

2012-01-01

The research focus was a non-academic service quality assessment within higher education. In particular, non-academic service quality perceptions of faculty and students were evaluated using a service profit chain. This enabled a comparison which helped understanding of non-academic service quality orientation from a key users' perspective. Data…

Jwalk and MNXL Web Server: Model Validation using Restraints from Crosslinking Mass Spectrometry.

PubMed

Bullock, J M A; Thalassinos, K; Topf, M

2018-05-07

Crosslinking Mass Spectrometry generates restraints that can be used to model proteins and protein complexes. Previously, we have developed two methods, to help users achieve better modelling performance from their crosslinking restraints: Jwalk, to estimate solvent accessible distances between crosslinked residues and MNXL, to assess the quality of the models based on these distances. Here we present the Jwalk and MNXL webservers, which streamline the process of validating monomeric protein models using restraints from crosslinks. We demonstrate this by using the MNXL server to filter models made of varying quality, selecting the most native-like. The webserver and source code are freely available from jwalk.ismb.lon.ac.uk and mnxl.ismb.lon.ac.uk. m.topf@cryst.bbk.ac.uk, j.bullock@cryst.bbk.ac.uk.

Quality Assurance in Clinical Chemistry: A Touch of Statistics and A Lot of Common Sense

PubMed Central

2016-01-01

Summary Working in laboratories of clinical chemistry, we risk feeling that our personal contribution to quality is small and that statistical models and manufacturers play the major roles. It is seldom sufficiently acknowledged that personal knowledge, skills and common sense are crucial for quality assurance in the interest of patients. The employees, environment and procedures inherent to the laboratory including its interactions with the clients are crucial for the overall result of the total testing chain. As the measurement systems, reagents and procedures are gradually improved, work on the preanalytical, postanalytical and clinical phases is likely to pay the most substantial dividends in accomplishing further quality improvements. This means changing attitudes and behaviour, especially of the users of the laboratory. It requires understanding people and how to engage them in joint improvement processes. We need to use our knowledge and common sense expanded with new skills e.g. from the humanities, management, business and change sciences in order to bring this about together with the users of the laboratory. PMID:28356868

The SCALE Verified, Archived Library of Inputs and Data - VALID

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marshall, William BJ J; Rearden, Bradley T

The Verified, Archived Library of Inputs and Data (VALID) at ORNL contains high quality, independently reviewed models and results that improve confidence in analysis. VALID is developed and maintained according to a procedure of the SCALE quality assurance (QA) plan. This paper reviews the origins of the procedure and its intended purpose, the philosophy of the procedure, some highlights of its implementation, and the future of the procedure and associated VALID library. The original focus of the procedure was the generation of high-quality models that could be archived at ORNL and applied to many studies. The review process associated withmore » model generation minimized the chances of errors in these archived models. Subsequently, the scope of the library and procedure was expanded to provide high quality, reviewed sensitivity data files for deployment through the International Handbook of Evaluated Criticality Safety Benchmark Experiments (IHECSBE). Sensitivity data files for approximately 400 such models are currently available. The VALID procedure and library continue fulfilling these multiple roles. The VALID procedure is based on the quality assurance principles of ISO 9001 and nuclear safety analysis. Some of these key concepts include: independent generation and review of information, generation and review by qualified individuals, use of appropriate references for design data and documentation, and retrievability of the models, results, and documentation associated with entries in the library. Some highlights of the detailed procedure are discussed to provide background on its implementation and to indicate limitations of data extracted from VALID for use by the broader community. Specifically, external users of data generated within VALID must take responsibility for ensuring that the files are used within the QA framework of their organization and that use is appropriate. The future plans for the VALID library include expansion to include additional experiments from the IHECSBE, to include experiments from areas beyond criticality safety, such as reactor physics and shielding, and to include application models. In the future, external SCALE users may also obtain qualification under the VALID procedure and be involved in expanding the library. The VALID library provides a pathway for the criticality safety community to leverage modeling and analysis expertise at ORNL.« less

RadVel: The Radial Velocity Modeling Toolkit

NASA Astrophysics Data System (ADS)

Fulton, Benjamin J.; Petigura, Erik A.; Blunt, Sarah; Sinukoff, Evan

2018-04-01

RadVel is an open-source Python package for modeling Keplerian orbits in radial velocity (RV) timeseries. RadVel provides a convenient framework to fit RVs using maximum a posteriori optimization and to compute robust confidence intervals by sampling the posterior probability density via Markov Chain Monte Carlo (MCMC). RadVel allows users to float or fix parameters, impose priors, and perform Bayesian model comparison. We have implemented real-time MCMC convergence tests to ensure adequate sampling of the posterior. RadVel can output a number of publication-quality plots and tables. Users may interface with RadVel through a convenient command-line interface or directly from Python. The code is object-oriented and thus naturally extensible. We encourage contributions from the community. Documentation is available at http://radvel.readthedocs.io.

Electronic Cigarettes and Indoor Air Quality: A Simple Approach to Modeling Potential Bystander Exposures to Nicotine

PubMed Central

Colard, Stéphane; O’Connell, Grant; Verron, Thomas; Cahours, Xavier; Pritchard, John D.

2014-01-01

There has been rapid growth in the use of electronic cigarettes (“vaping”) in Europe, North America and elsewhere. With such increased prevalence, there is currently a debate on whether the aerosol exhaled following the use of e-cigarettes has implications for the quality of air breathed by bystanders. Conducting chemical analysis of the indoor environment can be costly and resource intensive, limiting the number of studies which can be conducted. However, this can be modelled reasonably accurately based on empirical emissions data and using some basic assumptions. Here, we present a simplified model, based on physical principles, which considers aerosol propagation, dilution and extraction to determine the potential contribution of a single puff from an e-cigarette to indoor air. From this, it was then possible to simulate the cumulative effect of vaping over time. The model was applied to a virtual, but plausible, scenario considering an e-cigarette user and a non-user working in the same office space. The model was also used to reproduce published experimental studies and showed good agreement with the published values of indoor air nicotine concentration. With some additional refinements, such an approach may be a cost-effective and rapid way of assessing the potential exposure of bystanders to exhaled e-cigarette aerosol constituents. PMID:25547398

High-resolution urban observation network for user-specific meteorological information service in the Seoul Metropolitan Area, South Korea

NASA Astrophysics Data System (ADS)

Park, Moon-Soo; Park, Sung-Hwa; Chae, Jung-Hoon; Choi, Min-Hyeok; Song, Yunyoung; Kang, Minsoo; Roh, Joon-Woo

2017-04-01

To improve our knowledge of urban meteorology, including those processes applicable to high-resolution meteorological models in the Seoul Metropolitan Area (SMA), the Weather Information Service Engine (WISE) Urban Meteorological Observation System (UMS-Seoul) has been designed and installed. The UMS-Seoul incorporates 14 surface energy balance (EB) systems, 7 surface-based three-dimensional (3-D) meteorological observation systems and applied meteorological (AP) observation systems, and the existing surface-based meteorological observation network. The EB system consists of a radiation balance system, sonic anemometers, infrared CO2/H2O gas analyzers, and many sensors measuring the wind speed and direction, temperature and humidity, precipitation, and air pressure. The EB-produced radiation, meteorological, and turbulence data will be used to quantify the surface EB according to land use and to improve the boundary-layer and surface processes in meteorological models. The 3-D system, composed of a wind lidar, microwave radiometer, aerosol lidar, or ceilometer, produces the cloud height, vertical profiles of backscatter by aerosols, wind speed and direction, temperature, humidity, and liquid water content. It will be used for high-resolution reanalysis data based on observations and for the improvement of the boundary-layer, radiation, and microphysics processes in meteorological models. The AP system includes road weather information, mosquito activity, water quality, and agrometeorological observation instruments. The standardized metadata for networks and stations are documented and renewed periodically to provide a detailed observation environment. The UMS-Seoul data are designed to support real-time acquisition and display and automatically quality check within 10 min from observation. After the quality check, data can be distributed to relevant potential users such as researchers and policy makers. Finally, two case studies demonstrate that the observed data have a great potential to help to understand the boundary-layer structures more deeply, improve the performance of high-resolution meteorological models, and provide useful information customized based on the user demands in the SMA.

Users’ Manual and Validation of the Automated Grading System (AGS): Improving the Quality of Intelligence Summaries Using Feedback from an Unsupervised Model of Semantics

DTIC Science & Technology

2012-12-01

trajectories in space, and are therefore very highly similar, and a cosine of 0 indicates that the two vectors are unrelated. The vector of a good summary...topic. The effectiveness of the AGS’s ability to automatically grade student assignment is completely dependent on a good match between this corpus...students to summarise “User Documents” that focused on fishing, then a good corpus would contain documents about the various types of fishing

Online Sellers’ Website Quality Influencing Online Buyers’ Purchase Intention

NASA Astrophysics Data System (ADS)

Shea Lee, Tan; Ariff, Mohd Shoki Md; Zakuan, Norhayati; Sulaiman, Zuraidah; Zameri Mat Saman, Muhamad

2016-05-01

The increase adoption of Internet among young users in Malaysia provides high prospect for online seller. Young users aged between 18 and 25 years old are important to online sellers because they are actively involved in online purchasing and this group of online buyers is expected to dominate future online market. Therefore, examining online sellers’ website quality and online buyers’ purchase intention is crucial. Based on the Theory of planned behavior (TPB), a conceptual model of online sellers’ website quality and purchase intention of online buyers was developed. E-tailQ instrument was adapted in this study which composed of website design, reliability/fulfillment, security, privacy & trust, and customer service. Using online questionnaire and convenience sampling procedure, primary data were obtained from 240 online buyers aged between 18 to 25 years old. It was discovered that website design, website reliability/fulfillment, website security, privacy & trust, and website customer service positively and significantly influence intention of online buyers to continuously purchase via online channels. This study concludes that online sellers’ website quality is important in predicting online buyers’ purchase intention. Recommendation and implication of this study were discussed focusing on how online sellers should improve their website quality to stay competitive in online business.

Promoting quality improvement in French healthcare organisations: design and impact of a compendium of models and tools

PubMed Central

Erbault, M; Glikman, J; Ravineau, M; Lajzerowicz, N; Terra, J

2003-01-01



 Relevant and user friendly information should be provided to professionals who wish to promote quality improvement in healthcare organisations (HCOs). In response to requests from French HCOs, we designed a compendium of methods and tools for use in quality improvement. Its contents were based on a critical review of the literature, face-to-face interviews with three industrial/business experts in quality, the views of 13 healthcare professionals knowledgeable in quality issues, and comments from over 40 potential users of the compendium. Overall, 14 methods and 20 tools relevant and applicable to the healthcare sector were identified. They were classified according to their main thrust, explained in detail, illustrated with specific cases from the literature or from personal experience, and published as a loose leaf compendium. The compendium was posted on the worldwide web and presented to healthcare managers in September 2000. It has become one of the most popular ANAES publications (approximately 5400 downloads over the first 6 months), partly because all French HCOs are legally bound to undergo accreditation which has been set up and is being implemented by ANAES. PMID:14532370

Adherence to Antitumor Necrosis Factor Use Recommendations in Spondyloarthritis: Measurement and Effect in the DESIR Cohort.

PubMed

Harvard, Stephanie; Guh, Daphne; Bansback, Nick; Richette, Pascal; Saraux, Alain; Fautrel, Bruno; Anis, Aslam H

2017-10-01

To evaluate a classification system to define adherence to axial spondyloarthritis (axSpA) anti-tumor necrosis factor (anti-TNF) use recommendations and examine the effect of adherence on outcomes in the DESIR cohort (Devenir des Spondylarthropathies Indifférenciées Récentes). Using alternate definitions of adherence, patients were classified as adherent "timely" anti-TNF users, nonadherent "late" anti-TNF users, adherent nonusers ("no anti-TNF need"), non-adherent nonusers ("unmet anti-TNF need"). Multivariate models were fitted to examine the effect of adherence on quality-adjusted life-years (QALY), total costs, and nonbiologic costs 1 year following an index date. Generalized linear regression models assuming a γ-distribution with log link were used for costs outcomes and linear regression models for QALY outcomes. Using the main definition of adherence, there were no significant differences between late anti-TNF users and timely anti-TNF users in total costs (RR 0.86, 95% CI 0.54-1.36, p = 0.516) or nonbiologic costs (RR 0.72, 95% CI 0.44-1.18, p = 0.187). However, in the sensitivity analysis, late anti-TNF users had significantly increased nonbiologic costs compared with timely users (RR 1.58, 95% CI 1.06-2.36, p = 0.026). In the main analysis, there were no significant differences in QALY between timely anti-TNF users and late anti-TNF users, or between timely users and patients with unmet anti-TNF need. In the sensitivity analysis, patients with unmet anti-TNF need had significantly lower QALY than timely anti-TNF users (-0.04, 95% CI -0.07 to -0.01, p = 0.016). The effect of adherence to anti-TNF recommendations on outcomes was sensitive to the definition of adherence used, highlighting the need to validate methods to measure adherence.

Development of a Geographic Information System Based Dust Dispersion Modeling System For Use In the Planning and Implementation of Military Training Exercises

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crandall, Duard W; Rutz, Frederick C

2004-08-12

Military maneuvers and training exercises are essential for national and world defense. These maneuvers must however be performed in a manner that will have a minimal effect on the environment and local civilians. As residential areas continue to develop near military sites, possible impacts from military traffic and exercises to these areas begin to become of greater concern. Concerns facing the military include the effects of particulate air quality and atmospheric dust dispersion caused by such maneuvers. To aid the Department of Defense with this problem, Pacific Northwest National Laboratory proposed a plan to develop, document and test a modelingmore » system for use in dust dispersion reduction and management near government sites. To accomplish this task a user interface was developed that would be user friendly yet sophisticated enough to accommodate the needs of the client. One such need is to integrate a geographic information system (GIS) with the dust dispersion modeling software. This allows the user to enter the point, area, or line source required for the model runs. Incorporating the GIS with the software will also allow the user to view plume rise and expansion over actual data maps of the desired site. Data collected during previous field studies will be used to verify the results generated by the dust dispersion models. Thus utilizing historical, current, and user defined data, near real-time dust dispersion models will be able to aid in estimating and minimizing the effects of military exercises on the environment and nonmilitary personnel.« less

Exploring practical approaches to maximising data quality in electronic healthcare records in the primary care setting and associated benefits. Report of panel-led discussion held at SAPC in July 2014.

PubMed

Dungey, Sheena; Glew, Simon; Heyes, Barbara; Macleod, John; Tate, A Rosemary

2016-09-01

Electronic healthcare records provide information about patient care over time which not only affords the opportunity to improve patient care directly through effective monitoring and identification of care requirements but also offers a unique platform for both clinical and service-model research essential to the longer-term development of the health service. The quality of the recorded data can, however, be variable and can compromise the validity of data use both for primary and secondary purposes. In order to explore the challenges and benefits of and approaches to recording high quality primary care electronic records, a Clinical Practice Research Datalink (CPRD) sponsored workshop was held at the Society of Academic Primary Care (SAPC) conference in 2014 with the aim of engaging GPs and other data users. The workshop was held as a structured discussion, led by an expert panel and focused around three questions: (1) What are the data quality priorities for clinicians and researchers? How do these priorities differ or overlap? (2) What challenges might GPs face in provision of good data quality both for treating their patients and for research? Do these aims conflict? (3) What tools (such as data metrics and visualisations or software components) could assist the GP in improving data quality and patient management and could this tie in with analytical processes occurring at the research stage? The discussion highlighted both overlap and differences in the perceived data quality priorities and challenges for different user groups. Five key areas of focus were agreed upon and recommendations determined for moving forward in improving quality. The importance of good high quality electronic healthcare records has been set forth along with the need for a practical user-considered and collaborative approach to its improvement.

Perceived image quality for autostereoscopic holograms in healthcare training

NASA Astrophysics Data System (ADS)

Goldiez, Brian; Abich, Julian; Carter, Austin; Hackett, Matthew

2017-03-01

The current state of dynamic light field holography requires further empirical investigation to ultimately advance this developing technology. This paper describes a user-centered design approach for gaining insight into the features most important to clinical personnel using emerging dynamic holographic displays. The approach describes the generation of a high quality holographic model of a simulated traumatic amputation above the knee using 3D scanning. Using that model, a set of static holographic prints will be created varying in color or monochrome, contrast ratio, and polygon density. Leveraging methods from image quality research, the goal for this paper is to describe an experimental approach wherein participants are asked to provide feedback regarding the elements previously mentioned in order to guide the ongoing evolution of holographic displays.

Quality assurance and stability reference (QUASAR) monitoring concept for calibration/validation

NASA Astrophysics Data System (ADS)

Teillet, Philippe M.; Horler, D. N.; O'Neill, Norman T.

1997-12-01

The paper introduces the concept that calibration/validation (cal/val) can play an essential role in bringing remote sensing to mainstream consumers in an information-based society, provided that cal/val is an integral part of a quality-assurance strategy. A market model for remote sensing is introduced and used to demonstrate that quality assurance is the key to bridging the gap between early adopters of technology and mainstream markets. The paper goes on to propose the semi-continuous monitoring of quality assurance and stability reference (QUASAR) sites as an important first step towards a cal/val infrastructure beneficial to mainstream users. Prospective QUASAR test sites are described.

A coupled human-natural system to assess the operational value of weather and climate services for agriculture

NASA Astrophysics Data System (ADS)

Li, Yu; Giuliani, Matteo; Castelletti, Andrea

2017-09-01

Recent advances in weather and climate (W&C) services are showing increasing forecast skills over seasonal and longer timescales, potentially providing valuable support in informing decisions in a variety of economic sectors. Quantifying this value, however, might not be straightforward as better forecast quality does not necessarily imply better decisions by the end users, especially when forecasts do not reach their final users, when providers are not trusted, or when forecasts are not appropriately understood. In this study, we contribute an assessment framework to evaluate the operational value of W&C services for informing agricultural practices by complementing traditional forecast quality assessments with a coupled human-natural system behavioural model which reproduces farmers' decisions. This allows a more critical assessment of the forecast value mediated by the end users' perspective, including farmers' risk attitudes and behavioural factors. The application to an agricultural area in northern Italy shows that the quality of state-of-the-art W&C services is still limited in predicting the weather and the crop yield of the incoming agricultural season, with ECMWF annual products simulated by the IFS/HOPE model resulting in the most skillful product in the study area. However, we also show that the accuracy of estimating crop yield and the probability of making optimal decisions are not necessarily linearly correlated, with the overall assessment procedure being strongly impacted by the behavioural attitudes of farmers, which can produce rank reversals in the quantification of the W&C services operational value depending on the different perceptions of risk and uncertainty.

Medical homes versus individual practice in primary care: impact on health care expenditures.

PubMed

Perelman, Julian; Roch, Isabelle; Heymans, Isabelle; Moureaux, Catherine; Lagasse, Raphael; Annemans, Lieven; Closon, Marie-Christine

2013-08-01

The medical home (MH) model has prompted increasing attention given its potential to improve quality of care while reducing health expenditures. We compare overall and specific health care expenditures in Belgium, from the third-party payer perspective (compulsory social insurance), between patients treated at individual practices (IP) and at MHs. We compare the sociodemographic profile of MH and IP users. This is a retrospective study using public insurance claims data. Generalized linear models estimate the impact on health expenditures of being treated at a MH versus IP, controlling for individual, and area-based sociodemographic characteristics. The choice of primary care setting is modeled using logistic regressions. A random sample of 43,678 persons followed during the year 2004. Third-party payer expenditures for primary care, secondary care consultations, pharmaceuticals, laboratory tests, acute and long-term inpatient care. Overall third-party payer expenditures do not differ significantly between MH and IP users (€+27). Third-party payer primary care expenditures are higher for MH than for IP users (€+129), but this difference is offset by lower expenditures for secondary care consultations (€-11), drugs (€-40), laboratory tests (€-5) and acute and long-term inpatient care (€-53). MHs attract younger and more underprivileged populations. MHs induce a shift in expenditures from secondary care, drugs, and laboratory tests to primary care, while treating a less economically favored population. Combined with positive results regarding quality, MH structures are a promising way to tackle the challenges of primary care.

[Development of whole process quality control and management system of traditional Chinese medicine decoction pieces based on traditional Chinese medicine quality tree].

PubMed

Yu, Wen-Kang; Dong, Ling; Pei, Wen-Xuan; Sun, Zhi-Rong; Dai, Jun-Dong; Wang, Yun

2017-12-01

The whole process quality control and management of traditional Chinese medicine (TCM) decoction pieces is a system engineering, involving the base environment, seeds and seedlings, harvesting, processing and other multiple steps, so the accurate identification of factors in TCM production process that may induce the quality risk, as well as reasonable quality control measures are very important. At present, the concept of quality risk is mainly concentrated in the aspects of management and regulations, etc. There is no comprehensive analysis on possible risks in the quality control process of TCM decoction pieces, or analysis summary of effective quality control schemes. A whole process quality control and management system for TCM decoction pieces based on TCM quality tree was proposed in this study. This system effectively combined the process analysis method of TCM quality tree with the quality risk management, and can help managers to make real-time decisions while realizing the whole process quality control of TCM. By providing personalized web interface, this system can realize user-oriented information feedback, and was convenient for users to predict, evaluate and control the quality of TCM. In the application process, the whole process quality control and management system of the TCM decoction pieces can identify the related quality factors such as base environment, cultivation and pieces processing, extend and modify the existing scientific workflow according to their own production conditions, and provide different enterprises with their own quality systems, to achieve the personalized service. As a new quality management model, this paper can provide reference for improving the quality of Chinese medicine production and quality standardization. Copyright© by the Chinese Pharmaceutical Association.

netCDF Operators for Rapid Analysis of Measured and Modeled Swath-like Data

NASA Astrophysics Data System (ADS)

Zender, C. S.

2015-12-01

Swath-like data (hereafter SLD) are defined by non-rectangular and/or time-varying spatial grids in which one or more coordinates are multi-dimensional. It is often challenging and time-consuming to work with SLD, including all Level 2 satellite-retrieved data, non-rectangular subsets of Level 3 data, and model data on curvilinear grids. Researchers and data centers want user-friendly, fast, and powerful methods to specify, extract, serve, manipulate, and thus analyze, SLD. To meet these needs, large research-oriented agencies and modeling center such as NASA, DOE, and NOAA increasingly employ the netCDF Operators (NCO), an open-source scientific data analysis software package applicable to netCDF and HDF data. NCO includes extensive, fast, parallelized regridding features to facilitate analysis and intercomparison of SLD and model data. Remote sensing, weather and climate modeling and analysis communities face similar problems in handling SLD including how to easily: 1. Specify and mask irregular regions such as ocean basins and political boundaries in SLD (and rectangular) grids. 2. Bin, interpolate, average, or re-map SLD to regular grids. 3. Derive secondary data from given quality levels of SLD. These common tasks require a data extraction and analysis toolkit that is SLD-friendly and, like NCO, familiar in all these communities. With NCO users can 1. Quickly project SLD onto the most useful regular grids for intercomparison. 2. Access sophisticated statistical and regridding functions that are robust to missing data and allow easy specification of quality control metrics. These capabilities improve interoperability, software-reuse, and, because they apply to SLD, minimize transmission, storage, and handling of unwanted data. While SLD analysis still poses many challenges compared to regularly gridded, rectangular data, the custom analyses scripts SLD once required are now shorter, more powerful, and user-friendly.

[The Technology Acceptance Model and Its Application in a Telehealth Program for the Elderly With Chronic Illnesses].

PubMed

Chang, Chi-Ping

2015-06-01

Many technology developments hold the potential to improve the quality of life of people and make life easier and more comfortable. New technologies have been well accepted by most people. Information sharing in particular is a major catalyst of change in our current technology-based society. Technology has widely innovated life and drastically changed lifestyles. The Technology Acceptance Model (TAM), a model developed to address the rapid advances in computer technology, is used to explain and predict user acceptance of new information technology. In the past, businesses have used the TAM as an assessment tool to predict user acceptance when introducing new technology products. They have also used external factors in the model to influence user perceptions and beliefs and to ensure the successful spread of new technologies. Informatization plays a critical role in healthcare services. Due to the rapid aging of populations and upward trends in the incidence of chronic illness, requirements for long-term care have increased in both quality and quantity. Therefore, there has been an increased emphasis on integrating healthcare and information technology. However, most elderly are significantly less adept at technology use than the general population. Therefore, we reexamined the effect that the essential concepts in a TAM exerted on technology acceptance. In the present study, the technology acceptance experience with regard to telehealth of the elderly was used as an example to explain how the revised technology acceptance model (TAM 2) may be effectively applied to enhance the understanding of technology care among nurses. The results may serve as a reference for future research on healthcare-technology use in long-term care or in elderly populations.

Quality versus intelligibility: studying human preferences for American Sign Language video

NASA Astrophysics Data System (ADS)

Ciaramello, Frank M.; Hemami, Sheila S.

2011-03-01

Real-time videoconferencing using cellular devices provides natural communication to the Deaf community. For this application, compressed American Sign Language (ASL) video must be evaluated in terms of the intelligibility of the conversation and not in terms of the overall aesthetic quality of the video. This work presents a paired comparison experiment to determine the subjective preferences of ASL users in terms of the trade-off between intelligibility and quality when varying the proportion of the bitrate allocated explicitly to the regions of the video containing the signer. A rate-distortion optimization technique, which jointly optimizes a quality criteria and an intelligibility criteria according to a user-specified parameter, generates test video pairs for the subjective experiment. Experimental results suggest that at sufficiently high bitrates, all users prefer videos in which the non-signer regions in the video are encoded with some nominal rate. As the total encoding bitrate decreases, users generally prefer video in which a greater proportion of the rate is allocated to the signer. The specific operating points preferred in the quality-intelligibility trade-off vary with the demographics of the users.

Exploring the Relationship Between Online Social Network Site Usage and the Impact on Quality of Life for Older and Younger Users: An Interaction Analysis

PubMed Central

Chen, Liming; Mulvenna, Maurice D; Bond, Raymond

2016-01-01

Background Analyzing content generated by users of social network sites has been shown to be beneficial across a number of disciplines. Such analysis has revealed the precise behavior of users that details their distinct patterns of engagement. An issue is evident whereby without direct engagement with end users, the reasoning for anomalies can only be the subject of conjecture. Furthermore, the impact of engaging in social network sites on quality of life is an area which has received little attention. Of particular interest is the impact of online social networking on older users, which is a demographic that is specifically vulnerable to social isolation. A review of the literature reveals a lack of knowledge concerning the impact of these technologies on such users and even less is known regarding how this impact varies across different demographics. Objective The objective of our study was to analyze user interactions and to survey the attitudes of social network users directly, capturing data in four key areas: (1) functional usage, (2) behavioral patterns, (3) technology, and (4) quality of life. Methods An online survey was constructed, comprising 32 questions. Each question directly related to a research question. Respondents were recruited through a variety of methods including email campaigns, Facebook advertisements, and promotion from related organizations. Results In total, data was collected from 919 users containing 446 younger and 473 older users. In comparison to younger users, a greater proportion of older users (289/473, 61.1% older vs 218/446, 48.9% younger) (P<.001) stated that Facebook had either a positive or huge impact on their quality of life. Furthermore, a greater percentage of older users strongly agreed that Facebook strengthened their relationship with other people (64/473, 13.5% older vs 40/446, 9.0%younger) (P=.02). In comparison to younger users, a greater proportion of older users had more positive emotions—classified as slightly better or very good—during their engagement with Facebook (186/473, 39.3% older vs 120/446, 26.9% younger) (P<.001). Conclusions The results reveal that despite engaging at considerably lower rates with significantly fewer connections, older users gain a greater quality-of-life benefit. Results disclose how both cohorts vary in their use, interactions, and rationale for engaging with Facebook. PMID:27687745

Exploring the Relationship Between Online Social Network Site Usage and the Impact on Quality of Life for Older and Younger Users: An Interaction Analysis.

PubMed

Quinn, Darren; Chen, Liming; Mulvenna, Maurice D; Bond, Raymond

2016-09-29

Analyzing content generated by users of social network sites has been shown to be beneficial across a number of disciplines. Such analysis has revealed the precise behavior of users that details their distinct patterns of engagement. An issue is evident whereby without direct engagement with end users, the reasoning for anomalies can only be the subject of conjecture. Furthermore, the impact of engaging in social network sites on quality of life is an area which has received little attention. Of particular interest is the impact of online social networking on older users, which is a demographic that is specifically vulnerable to social isolation. A review of the literature reveals a lack of knowledge concerning the impact of these technologies on such users and even less is known regarding how this impact varies across different demographics. The objective of our study was to analyze user interactions and to survey the attitudes of social network users directly, capturing data in four key areas: (1) functional usage, (2) behavioral patterns, (3) technology, and (4) quality of life. An online survey was constructed, comprising 32 questions. Each question directly related to a research question. Respondents were recruited through a variety of methods including email campaigns, Facebook advertisements, and promotion from related organizations. In total, data was collected from 919 users containing 446 younger and 473 older users. In comparison to younger users, a greater proportion of older users (289/473, 61.1% older vs 218/446, 48.9% younger) (P<.001) stated that Facebook had either a positive or huge impact on their quality of life. Furthermore, a greater percentage of older users strongly agreed that Facebook strengthened their relationship with other people (64/473, 13.5% older vs 40/446, 9.0%younger) (P=.02). In comparison to younger users, a greater proportion of older users had more positive emotions-classified as slightly better or very good-during their engagement with Facebook (186/473, 39.3% older vs 120/446, 26.9% younger) (P<.001). The results reveal that despite engaging at considerably lower rates with significantly fewer connections, older users gain a greater quality-of-life benefit. Results disclose how both cohorts vary in their use, interactions, and rationale for engaging with Facebook.

User's guide for RAM. Volume II. Data preparation and listings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Turner, D.B.; Novak, J.H.

1978-11-01

The information presented in this user's guide is directed to air pollution scientists having an interest in applying air quality simulation models. RAM is a method of estimating short-term dispersion using the Gaussian steady-state model. These algorithms can be used for estimating air quality concentrations of relatively nonreactive pollutants for averaging times from an hour to a day from point and area sources. The algorithms are applicable for locations with level or gently rolling terrain where a single wind vector for each hour is a good approximation to the flow over the source area considered. Calculations are performed for eachmore » hour. Hourly meteorological data required are wind direction, wind speed, temperature, stability class, and mixing height. Emission information required of point sources consists of source coordinates, emission rate, physical height, stack diameter, stack gas exit velocity, and stack gas temperature. Emission information required of area sources consists of southwest corner coordinates, source side length, total area emission rate and effective area source-height. Computation time is kept to a minimum by the manner in which concentrations from area sources are estimated using a narrow plume hypothesis and using the area source squares as given rather than breaking down all sources into an area of uniform elements. Options are available to the user to allow use of three different types of receptor locations: (1) those whose coordinates are input by the user, (2) those whose coordinates are determined by the model and are downwind of significant point and area sources where maxima are likely to occur, and (3) those whose coordinates are determined by the model to give good area coverage of a specific portion of the region. Computation time is also decreased by keeping the number of receptors to a minimum. Volume II presents RAM example outputs, typical run streams, variable glossaries, and Fortran source codes.« less

An Attention-Information-Based Spatial Adaptation Framework for Browsing Videos via Mobile Devices

NASA Astrophysics Data System (ADS)

Li, Houqiang; Wang, Yi; Chen, Chang Wen

2007-12-01

With the growing popularity of personal digital assistant devices and smart phones, more and more consumers are becoming quite enthusiastic to appreciate videos via mobile devices. However, limited display size of the mobile devices has been imposing significant barriers for users to enjoy browsing high-resolution videos. In this paper, we present an attention-information-based spatial adaptation framework to address this problem. The whole framework includes two major parts: video content generation and video adaptation system. During video compression, the attention information in video sequences will be detected using an attention model and embedded into bitstreams with proposed supplement-enhanced information (SEI) structure. Furthermore, we also develop an innovative scheme to adaptively adjust quantization parameters in order to simultaneously improve the quality of overall encoding and the quality of transcoding the attention areas. When the high-resolution bitstream is transmitted to mobile users, a fast transcoding algorithm we developed earlier will be applied to generate a new bitstream for attention areas in frames. The new low-resolution bitstream containing mostly attention information, instead of the high-resolution one, will be sent to users for display on the mobile devices. Experimental results show that the proposed spatial adaptation scheme is able to improve both subjective and objective video qualities.

Framing the magic

NASA Astrophysics Data System (ADS)

Tsoupikova, Daria

2006-02-01

This paper will explore how the aesthetics of the virtual world affects, transforms, and enhances the immersive emotional experience of the user. What we see and what we do upon entering the virtual environment influences our feelings, mental state, physiological changes and sensibility. To create a unique virtual experience the important component to design is the beauty of the virtual world based on the aesthetics of the graphical objects such as textures, models, animation, and special effects. The aesthetic potency of the images that comprise the virtual environment can make the immersive experience much stronger and more compelling. The aesthetic qualities of the virtual world as born out through images and graphics can influence the user's state of mind. Particular changes and effects on the user can be induced through the application of techniques derived from the research fields of psychology, anthropology, biology, color theory, education, art therapy, music, and art history. Many contemporary artists and developers derive much inspiration for their work from their experience with traditional arts such as painting, sculpture, design, architecture and music. This knowledge helps them create a higher quality of images and stereo graphics in the virtual world. The understanding of the close relation between the aesthetic quality of the virtual environment and the resulting human perception is the key to developing an impressive virtual experience.

Open source molecular modeling.

PubMed

Pirhadi, Somayeh; Sunseri, Jocelyn; Koes, David Ryan

2016-09-01

The success of molecular modeling and computational chemistry efforts are, by definition, dependent on quality software applications. Open source software development provides many advantages to users of modeling applications, not the least of which is that the software is free and completely extendable. In this review we categorize, enumerate, and describe available open source software packages for molecular modeling and computational chemistry. An updated online version of this catalog can be found at https://opensourcemolecularmodeling.github.io. Copyright © 2016 The Author(s). Published by Elsevier Inc. All rights reserved.

Regional Disparities in Online Map User Access Volume and Determining Factors

NASA Astrophysics Data System (ADS)

Li, R.; Yang, N.; Li, R.; Huang, W.; Wu, H.

2017-09-01

The regional disparities of online map user access volume (use `user access volume' in this paper to indicate briefly) is a topic of growing interest with the increment of popularity in public users, which helps to target the construction of geographic information services for different areas. At first place we statistically analysed the online map user access logs and quantified these regional access disparities on different scales. The results show that the volume of user access is decreasing from east to the west in China as a whole, while East China produces the most access volume; these cities are also the crucial economic and transport centres. Then Principal Component Regression (PCR) is applied to explore the regional disparities of user access volume. A determining model for Online Map access volume is proposed afterwards, which indicates that area scale is the primary determining factor for regional disparities, followed by public transport development level and public service development level. Other factors like user quality index and financial index have very limited influence on the user access volume. According to the study of regional disparities in user access volume, map providers can reasonably dispatch and allocate the data resources and service resources in each area and improve the operational efficiency of the Online Map server cluster.

A Quality Function Deployment Framework for the Service Quality of Health Information Websites

PubMed Central

Kim, Dohoon

2010-01-01

Objectives This research was conducted to identify both the users' service requirements on health information websites (HIWs) and the key functional elements for running HIWs. With the quality function deployment framework, the derived service attributes (SAs) are mapped into the suppliers' functional characteristics (FCs) to derive the most critical FCs for the users' satisfaction. Methods Using the survey data from 228 respondents, the SAs, FCs and their relationships were analyzed using various multivariate statistical methods such as principal component factor analysis, discriminant analysis, correlation analysis, etc. Simple and compound FC priorities were derived by matrix calculation. Results Nine factors of SAs and five key features of FCs were identified, and these served as the basis for the house of quality model. Based on the compound FC priorities, the functional elements pertaining to security and privacy, and usage support should receive top priority in the course of enhancing HIWs. Conclusions The quality function deployment framework can improve the FCs of the HIWs in an effective, structured manner, and it can also be utilized for critical success factors together with their strategic implications for enhancing the service quality of HIWs. Therefore, website managers could efficiently improve website operations by considering this study's results. PMID:21818418

[Association of indoor air quality with physical health of users in a newly built school building in a university].

PubMed

Mori, Mihoko; Hara, Kunio; Miyakita, Takashi; Ishitake, Tatsuya

2011-01-01

Several users of a newly built school building in a university (new building) complained about their deteriorating physical health. We measured the air quality in the new building, an old school building and atmosphere in September 2007 and February 2008. We also conducted a questionnaire survey of subjective symptoms of users in the new building in February 2008. The university administrator took some remedial actions to improve the indoor air quality after the first measurement. In September 2007, the concentrations of total volatile organic compounds (TVOCs) and 2-ethyl-1-hexanol in the new building were higher than those in the old building and atmosphere. Moreover, the concentrations of TVOCs exceeded the Japanese recommended guideline values. In February 2008, the concentrations of these substances in the new building were lower than the previous values. Out of the 177 users who were surveyed regarding subjective symptoms, 59 responded to the survey. In September 2007, 21 users felt that their physical health had deteriorated, while in February 2008, 12 users felt no deterioration. However, nine users still complained about the deterioration of their physical health. It was suggested that the improvement in the indoor air quality may be influenced by the decrease in room temperature. Even if the concentrations of VOCs are below the recommended guideline values, users with an enhanced sensitivity towards VOCs may lose their tolerance to low-level VOCs. Our findings suggested that a survey of the changes in the subjective symptoms of users should be conducted to evaluate the improvement in the indoor air quality of newly built buildings.

Total Quality Management of Information System for Quality Assessment of Pesantren Using Fuzzy-SERVQUAL

NASA Astrophysics Data System (ADS)

Faizah, Arbiati; Syafei, Wahyul Amien; Isnanto, R. Rizal

2018-02-01

This research proposed a model combining an approach of Total Quality Management (TQM) and Fuzzy method of Service Quality (SERVQUAL) to asses service quality. TQM implementation was as quality management orienting on customer's satisfaction by involving all stakeholders. SERVQUAL model was used to measure quality service based on five dimensions such as tangible, reliability, responsiveness, assurance, and empathy. Fuzzy set theory was to accommodate subjectivity and ambiguity of quality assessment. Input data consisted of indicator data and quality assessment aspect. Input data was, then, processed to be service quality assessment questionnaires of Pesantren by using Fuzzy method to get service quality score. This process consisted of some steps as follows : inputting dimension and questionnaire data to data base system, filling questionnaire through system, then, system calculated fuzzification, defuzzification, gap of quality expected and received by service receivers, and calculating each dimension rating showing quality refinement priority. Rating of each quality dimension was, then, displayed at dashboard system to enable users to see information. From system having been built, it could be known that tangible dimension had the highest gap, -0.399, thus it needs to be prioritized and gets evaluation and refinement action soon.

Spatial multiobjective optimization of agricultural conservation practices using a SWAT model and an evolutionary algorithm.

PubMed

Rabotyagov, Sergey; Campbell, Todd; Valcu, Adriana; Gassman, Philip; Jha, Manoj; Schilling, Keith; Wolter, Calvin; Kling, Catherine

2012-12-09

Finding the cost-efficient (i.e., lowest-cost) ways of targeting conservation practice investments for the achievement of specific water quality goals across the landscape is of primary importance in watershed management. Traditional economics methods of finding the lowest-cost solution in the watershed context (e.g.,(5,12,20)) assume that off-site impacts can be accurately described as a proportion of on-site pollution generated. Such approaches are unlikely to be representative of the actual pollution process in a watershed, where the impacts of polluting sources are often determined by complex biophysical processes. The use of modern physically-based, spatially distributed hydrologic simulation models allows for a greater degree of realism in terms of process representation but requires a development of a simulation-optimization framework where the model becomes an integral part of optimization. Evolutionary algorithms appear to be a particularly useful optimization tool, able to deal with the combinatorial nature of a watershed simulation-optimization problem and allowing the use of the full water quality model. Evolutionary algorithms treat a particular spatial allocation of conservation practices in a watershed as a candidate solution and utilize sets (populations) of candidate solutions iteratively applying stochastic operators of selection, recombination, and mutation to find improvements with respect to the optimization objectives. The optimization objectives in this case are to minimize nonpoint-source pollution in the watershed, simultaneously minimizing the cost of conservation practices. A recent and expanding set of research is attempting to use similar methods and integrates water quality models with broadly defined evolutionary optimization methods(3,4,9,10,13-15,17-19,22,23,25). In this application, we demonstrate a program which follows Rabotyagov et al.'s approach and integrates a modern and commonly used SWAT water quality model(7) with a multiobjective evolutionary algorithm SPEA2(26), and user-specified set of conservation practices and their costs to search for the complete tradeoff frontiers between costs of conservation practices and user-specified water quality objectives. The frontiers quantify the tradeoffs faced by the watershed managers by presenting the full range of costs associated with various water quality improvement goals. The program allows for a selection of watershed configurations achieving specified water quality improvement goals and a production of maps of optimized placement of conservation practices.

Determinants of quality of shared sanitation facilities in informal settlements: case study of Kisumu, Kenya.

PubMed

Simiyu, Sheillah; Swilling, Mark; Cairncross, Sandy; Rheingans, Richard

2017-01-11

Shared facilities are not recognised as improved sanitation due to challenges of maintenance as they easily can be avenues for the spread of diseases. Thus there is need to evaluate the quality of shared facilities, especially in informal settlements, where they are commonly used. A shared facility can be equated to a common good whose management depends on the users. If users do not work collectively towards keeping the facility clean, it is likely that the quality may depreciate due to lack of maintenance. This study examined the quality of shared sanitation facilities and used the common pool resource (CPR) management principles to examine the determinants of shared sanitation quality in the informal settlements of Kisumu, Kenya. Using a multiple case study design, the study employed both quantitative and qualitative methods. In both phases, users of shared sanitation facilities were interviewed, while shared sanitation facilities were inspected. Shared sanitation quality was a score which was the dependent variable in a regression analysis. Interviews during the qualitative stage were aimed at understanding management practices of shared sanitation users. Qualitative data was analysed thematically by following the CPR principles. Shared facilities, most of which were dirty, were shared by an average of eight households, and their quality decreased with an increase in the number of households sharing. The effect of numbers on quality is explained by behaviour reflected in the CPR principles, as it was easier to define boundaries of shared facilities when there were fewer users who cooperated towards improving their shared sanitation facility. Other factors, such as defined management systems, cooperation, collective decision making, and social norms, also played a role in influencing the behaviour of users towards keeping shared facilities clean and functional. Apart from hardware factors, quality of shared sanitation is largely due to group behaviour of users. The CPR principles form a crucial lens through which the dynamics of shared sanitation facilities in informal settlements can be understood. Development and policy efforts should incorporate group behaviour as they determine the quality of shared sanitation facilities.

Male and female ecstasy users: differences in patterns of use, sleep quality and mental health outcomes.

PubMed

Ogeil, Rowan P; Rajaratnam, Shantha M W; Broadbear, Jillian H

2013-09-01

Ecstasy users report a number of adverse effects following use including mood and sleep disturbances. The present study examined differences in characteristics of ecstasy use (amount, frequency of use, reported harm resulting from use) between males and females and assessed relationships between ecstasy use, sleep quality and mental health outcomes. An online survey of 268 ecstasy users (54.1% male, 45.9% female) was conducted. Validated sleep instruments assessing sleep quality and excessive daytime sleepiness, as well as questionnaires regarding physical and mental health (measured using the short-form health survey 12 (SF-12) and details of drug use were included. Male ecstasy users reported taking larger amounts of ecstasy, but were not more frequent users compared to females. Female ecstasy users were more likely to report increased harm following ecstasy including: feelings of guilt and remorse; failing to do what was normally expected of them; and having been told by others to cut down their ecstasy use. There were interactions between amount and gender and frequency and gender in predicting use of sleep medication and daytime dysfunction. There was a positive correlation between poorer sleep quality and negative mood, although this relationship was not moderated by sex. There is a significant association between sleep quality and mood disturbance in ecstasy users suggesting that these negative outcomes are co-morbid. These findings have implications for the treatment and advice given to ecstasy users who are experiencing sleep and/or mood related complaints. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Requirements UML Tool (RUT) Expanded for Extreme Programming (CI02)

NASA Technical Reports Server (NTRS)

McCoy, James R.

2003-01-01

A procedure for capturing and managing system requirements that incorporates XP user stories. Because costs associated with identifying problems in requirements increase dramatically over the lifecycle of a project, a method for identifying sources of software risks in user stories is urgently needed. This initiative aims to determine a set of guide-lines for user stories that will result in high-quality requirement. To further this initiative, a tool is needed to analyze user stories that can assess the quality of individual user stories, detect sources cf software risk's, produce software metrics, and identify areas in user stories that can be improved.

Modeling subjective evaluation of soundscape quality in urban open spaces: An artificial neural network approach.

PubMed

Yu, Lei; Kang, Jian

2009-09-01

This research aims to explore the feasibility of using computer-based models to predict the soundscape quality evaluation of potential users in urban open spaces at the design stage. With the data from large scale field surveys in 19 urban open spaces across Europe and China, the importance of various physical, behavioral, social, demographical, and psychological factors for the soundscape evaluation has been statistically analyzed. Artificial neural network (ANN) models have then been explored at three levels. It has been shown that for both subjective sound level and acoustic comfort evaluation, a general model for all the case study sites is less feasible due to the complex physical and social environments in urban open spaces; models based on individual case study sites perform well but the application range is limited; and specific models for certain types of location/function would be reliable and practical. The performance of acoustic comfort models is considerably better than that of sound level models. Based on the ANN models, soundscape quality maps can be produced and this has been demonstrated with an example.

Systems, methods and apparatus for modeling, specifying and deploying policies in autonomous and autonomic systems using agent-oriented software engineering

NASA Technical Reports Server (NTRS)

Sterritt, Roy (Inventor); Hinchey, Michael G. (Inventor); Penn, Joaquin (Inventor)

2011-01-01

Systems, methods and apparatus are provided through which in some embodiments, an agent-oriented specification modeled with MaCMAS, is analyzed, flaws in the agent-oriented specification modeled with MaCMAS are corrected, and an implementation is derived from the corrected agent-oriented specification. Described herein are systems, method and apparatus that produce fully (mathematically) tractable development of agent-oriented specification(s) modeled with methodology fragment for analyzing complex multiagent systems (MaCMAS) and policies for autonomic systems from requirements through to code generation. The systems, method and apparatus described herein are illustrated through an example showing how user formulated policies can be translated into a formal mode which can then be converted to code. The requirements-based programming systems, method and apparatus described herein may provide faster, higher quality development and maintenance of autonomic systems based on user formulation of policies.

An importance-performance analysis of hospital information system attributes: A nurses' perspective.

PubMed

Cohen, Jason F; Coleman, Emma; Kangethe, Matheri J

2016-02-01

Health workers have numerous concerns about hospital IS (HIS) usage. Addressing these concerns requires understanding the system attributes most important to their satisfaction and productivity. Following a recent HIS implementation, our objective was to identify priorities for managerial intervention based on user evaluations of the performance of the HIS attributes as well as the relative importance of these attributes to user satisfaction and productivity outcomes. We collected data along a set of attributes representing system quality, data quality, information quality, and service quality from 154 nurse users. Their quantitative responses were analysed using the partial least squares approach followed by an importance-performance analysis. Qualitative responses were analysed using thematic analysis to triangulate and supplement the quantitative findings. Two system quality attributes (responsiveness and ease of learning), one information quality attribute (detail), one service quality attribute (sufficient support), and three data quality attributes (records complete, accurate and never missing) were identified as high priorities for intervention. Our application of importance-performance analysis is unique in HIS evaluation and we have illustrated its utility for identifying those system attributes for which underperformance is not acceptable to users and therefore should be high priorities for intervention. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Quality of services and quality of life from service providers' perspectives: analysis with focus groups.

PubMed

Jenaro, C; Vega, V; Flores, N; Cruz, M

2013-06-01

Concepts such as support, quality of life and quality of services are customary in services for people with intellectual disabilities. The identification of the different ways of conceiving, prioritising and implementing these concepts by service providers can help to drive changes to achieve better personal outcomes for this population. The current study aims to identify service providers' perceptions regarding the quality of life of their clients and the quality of services they provide. It also aims to identify similarities and differences of appraisals among professionals, and to identify associations between supports, quality of life and quality of services. Data were collected from 22 service providers who attended three focus groups (professionals, direct support staff, and managers) from whom 424 comments were analysed. Service providers were asked about the required support for users, the meaning of quality of life for those users, and about features that should characterise quality services. Thematic analysis was employed and transcripts of the sessions were coded according to the dimensions of models on supports, quality of life and quality of services. Chi-squared tests were utilised to test for potential differences among groups. Each professional group has its own priorities concerning required supports. Among the organisation different and potentially conflicting perceptions regarding the meaning of experiencing quality of life coexist. Concerning quality of services, only managers mentioned personal outcomes. Finally, institutionalisation has a negative impact on supports, quality of life and quality of services. It is necessary to move beyond a shared awareness of the negative impact of institutionalisation towards the transformation of services in search of personal quality outcomes. © 2012 The Authors. Journal of Intellectual Disability Research © 2012 John Wiley & Sons Ltd, MENCAP & IASSID.

SIMULATION TOOL KIT FOR INDOOR AIR QUALITY AND INHALATION EXPOSURE (IAQX) VERSION 1.0 USER'S GUIDE

EPA Science Inventory

The User's Guide describes a Microsoft Windows-based indoor air quality (IAQ) simulation software package designed Simulation Tool Kit for Indoor Air Quality and Inhalation Exposure, or IAQX for short. This software complements and supplements existing IAQ simulation programs and...

Use of Electronic Documentation for Quality Improvement in Hospice

PubMed Central

Cagle, John G.; Rokoske, Franziska S.; Durham, Danielle; Schenck, Anna P.; Spence, Carol; Hanson, Laura C.

2015-01-01

Little evidence exists on the use of electronic documentation in hospice and its relationship to quality improvement practices. The purposes of this study were to: (1) estimate the prevalence of electronic documentation use in hospice; (2) identify organizational characteristics associated with use of electronic documentation; and (3) determine whether quality measurement practices differed based on documentation format (electronic vs. nonelectronic). Surveys concerning the use of electronic documentation for quality improvement practices and the monitoring of quality-related care and outcomes were collected from 653 hospices. Users of electronic documentation were able to monitor a wider range of quality-related data than users of nonelectronic documentation. Quality components such as advanced care planning, cultural needs, experience during care of the actively dying, and the number/types of care being delivered were more likely to be documented by users of electronic documentation. Use of electronic documentation may help hospices to monitor quality and compliance. PMID:22267819

Leveraging Multiactions to Improve Medical Personalized Ranking for Collaborative Filtering.

PubMed

Gao, Shan; Guo, Guibing; Li, Runzhi; Wang, Zongmin

2017-01-01

Nowadays, providing high-quality recommendation services to users is an essential component in web applications, including shopping, making friends, and healthcare. This can be regarded either as a problem of estimating users' preference by exploiting explicit feedbacks (numerical ratings), or as a problem of collaborative ranking with implicit feedback (e.g., purchases, views, and clicks). Previous works for solving this issue include pointwise regression methods and pairwise ranking methods. The emerging healthcare websites and online medical databases impose a new challenge for medical service recommendation. In this paper, we develop a model, MBPR (Medical Bayesian Personalized Ranking over multiple users' actions), based on the simple observation that users tend to assign higher ranks to some kind of healthcare services that are meanwhile preferred in users' other actions. Experimental results on the real-world datasets demonstrate that MBPR achieves more accurate recommendations than several state-of-the-art methods and shows its generality and scalability via experiments on the datasets from one mobile shopping app.

Leveraging Multiactions to Improve Medical Personalized Ranking for Collaborative Filtering

PubMed Central

2017-01-01

Nowadays, providing high-quality recommendation services to users is an essential component in web applications, including shopping, making friends, and healthcare. This can be regarded either as a problem of estimating users' preference by exploiting explicit feedbacks (numerical ratings), or as a problem of collaborative ranking with implicit feedback (e.g., purchases, views, and clicks). Previous works for solving this issue include pointwise regression methods and pairwise ranking methods. The emerging healthcare websites and online medical databases impose a new challenge for medical service recommendation. In this paper, we develop a model, MBPR (Medical Bayesian Personalized Ranking over multiple users' actions), based on the simple observation that users tend to assign higher ranks to some kind of healthcare services that are meanwhile preferred in users' other actions. Experimental results on the real-world datasets demonstrate that MBPR achieves more accurate recommendations than several state-of-the-art methods and shows its generality and scalability via experiments on the datasets from one mobile shopping app. PMID:29118963

Leveraging Terminology Services for Extract-Transform-Load Processes: A User-Centered Approach

PubMed Central

Peterson, Kevin J.; Jiang, Guoqian; Brue, Scott M.; Liu, Hongfang

2016-01-01

Terminology services serve an important role supporting clinical and research applications, and underpin a diverse set of processes and use cases. Through standardization efforts, terminology service-to-system interactions can leverage well-defined interfaces and predictable integration patterns. Often, however, users interact more directly with terminologies, and no such blueprints are available for describing terminology service-to-user interactions. In this work, we explore the main architecture principles necessary to build a user-centered terminology system, using an Extract-Transform-Load process as our primary usage scenario. To analyze our architecture, we present a prototype implementation based on the Common Terminology Services 2 (CTS2) standard using the Patient-Centered Network of Learning Health Systems (LHSNet) project as a concrete use case. We perform a preliminary evaluation of our prototype architecture using three architectural quality attributes: interoperability, adaptability and usability. We find that a design-time focus on user needs, cognitive models, and existing patterns is essential to maximize system utility. PMID:28269898

Pricing Resources in LTE Networks through Multiobjective Optimization

PubMed Central

Lai, Yung-Liang; Jiang, Jehn-Ruey

2014-01-01

The LTE technology offers versatile mobile services that use different numbers of resources. This enables operators to provide subscribers or users with differential quality of service (QoS) to boost their satisfaction. On one hand, LTE operators need to price the resources high for maximizing their profits. On the other hand, pricing also needs to consider user satisfaction with allocated resources and prices to avoid “user churn,” which means subscribers will unsubscribe services due to dissatisfaction with allocated resources or prices. In this paper, we study the pricing resources with profits and satisfaction optimization (PRPSO) problem in the LTE networks, considering the operator profit and subscribers' satisfaction at the same time. The problem is modelled as nonlinear multiobjective optimization with two optimal objectives: (1) maximizing operator profit and (2) maximizing user satisfaction. We propose to solve the problem based on the framework of the NSGA-II. Simulations are conducted for evaluating the proposed solution. PMID:24526889

Pricing resources in LTE networks through multiobjective optimization.

PubMed

Lai, Yung-Liang; Jiang, Jehn-Ruey

2014-01-01

The LTE technology offers versatile mobile services that use different numbers of resources. This enables operators to provide subscribers or users with differential quality of service (QoS) to boost their satisfaction. On one hand, LTE operators need to price the resources high for maximizing their profits. On the other hand, pricing also needs to consider user satisfaction with allocated resources and prices to avoid "user churn," which means subscribers will unsubscribe services due to dissatisfaction with allocated resources or prices. In this paper, we study the pricing resources with profits and satisfaction optimization (PRPSO) problem in the LTE networks, considering the operator profit and subscribers' satisfaction at the same time. The problem is modelled as nonlinear multiobjective optimization with two optimal objectives: (1) maximizing operator profit and (2) maximizing user satisfaction. We propose to solve the problem based on the framework of the NSGA-II. Simulations are conducted for evaluating the proposed solution.

Making Interoperability Easier with the NASA Metadata Management Tool

NASA Astrophysics Data System (ADS)

Shum, D.; Reese, M.; Pilone, D.; Mitchell, A. E.

2016-12-01

ISO 19115 has enabled interoperability amongst tools, yet many users find it hard to build ISO metadata for their collections because it can be large and overly flexible for their needs. The Metadata Management Tool (MMT), part of NASA's Earth Observing System Data and Information System (EOSDIS), offers users a modern, easy to use browser based tool to develop ISO compliant metadata. Through a simplified UI experience, metadata curators can create and edit collections without any understanding of the complex ISO-19115 format, while still generating compliant metadata. The MMT is also able to assess the completeness of collection level metadata by evaluating it against a variety of metadata standards. The tool provides users with clear guidance as to how to change their metadata in order to improve their quality and compliance. It is based on NASA's Unified Metadata Model for Collections (UMM-C) which is a simpler metadata model which can be cleanly mapped to ISO 19115. This allows metadata authors and curators to meet ISO compliance requirements faster and more accurately. The MMT and UMM-C have been developed in an agile fashion, with recurring end user tests and reviews to continually refine the tool, the model and the ISO mappings. This process is allowing for continual improvement and evolution to meet the community's needs.

A framework for diversifying recommendation lists by user interest expansion

PubMed Central

Zhang, Zhu; Zeng, Daniel Dajun

2017-01-01

Recommender systems have been widely used to discover users’ preferences and recommend interesting items to users during this age of information load. Researchers in the field of recommender systems have realized that the quality of a top-N recommendation list involves not only relevance but also diversity. Most traditional recommendation algorithms are difficult to generate a diverse item list that can cover most of his/her interests for each user, since they mainly focus on predicting accurate items similar to the dominant interests of users. Additionally, they seldom exploit semantic information such as item tags and users’ interest labels to improve recommendation diversity. In this paper, we propose a novel recommendation framework which mainly adopts an expansion strategy of user interests based on social tagging information. The framework enhances the diversity of users’ preferences by expanding the sizes and categories of the original user-item interaction records, and then adopts traditional recommendation models to generate recommendation lists. Empirical evaluations on three real-world data sets show that our method can effectively improve the accuracy and diversity of item recommendation. PMID:28959089

Open Source GIS Connectors to the NASA GES DISC Satellite Data

NASA Astrophysics Data System (ADS)

Pham, L.; Kempler, S. J.; Yang, W.

2014-12-01

The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) houses a suite of satellite-derived GIS data including high spatiotemporal resolution precipitation, air quality, and modeled land surface parameter data. The data are extremely useful to various GIS research and applications at regional, continental, and global scales, as evidenced by the growing GIS user requests to the data. On the other hand, we also found that some GIS users, especially those from the ArcGIS community, having difficulties in obtaining, importing, and using our data, primarily due to the unfamiliarity of the users with our products and GIS software's lack of capabilities in dealing with the predominately raster form data in various sometimes very complicated formats. In this presentation, we introduce a set of open source ArcGIS data connectors that significantly simplify the access and use of our data in ArcGIS. With the connectors, users do not need to know the data access URLs, the access protocols or syntaxes, and data formats. Nor do they need to browse through a long list of variables that are often embedded into one single science data file and whose names may sometimes be confusing to those not familiar with the file (such as variable CH4_VMR_D for "CH4 Volume mixing ratio from the descending orbit" and variable EVPsfc for "Total Evapotranspiration"). The connectors will expose most GIS-related variables to the users with easy to understand names. User can simply define the spatiotemporal range of their study, select interested parameter(s), and have the needed data be downloaded, imported, and displayed in ArcGIS. The connectors are python text files and there is no installation process. They can be placed at any user directory and be started by simply clicking on it. In the presentation, we'll also demonstrate how to use the tools to load GES DISC time series air quality data with a few clicks and how such data depict the spatial and temporal patterns of air quality in different parts of the world during the past decade.

Interface design and human factors considerations for model-based tight glycemic control in critical care.

PubMed

Ward, Logan; Steel, James; Le Compte, Aaron; Evans, Alicia; Tan, Chia-Siong; Penning, Sophie; Shaw, Geoffrey M; Desaive, Thomas; Chase, J Geoffrey

2012-01-01

Tight glycemic control (TGC) has shown benefits but has been difficult to implement. Model-based methods and computerized protocols offer the opportunity to improve TGC quality and compliance. This research presents an interface design to maximize compliance, minimize real and perceived clinical effort, and minimize error based on simple human factors and end user input. The graphical user interface (GUI) design is presented by construction based on a series of simple, short design criteria based on fundamental human factors engineering and includes the use of user feedback and focus groups comprising nursing staff at Christchurch Hospital. The overall design maximizes ease of use and minimizes (unnecessary) interaction and use. It is coupled to a protocol that allows nurse staff to select measurement intervals and thus self-manage workload. The overall GUI design is presented and requires only one data entry point per intervention cycle. The design and main interface are heavily focused on the nurse end users who are the predominant users, while additional detailed and longitudinal data, which are of interest to doctors guiding overall patient care, are available via tabs. This dichotomy of needs and interests based on the end user's immediate focus and goals shows how interfaces must adapt to offer different information to multiple types of users. The interface is designed to minimize real and perceived clinical effort, and ongoing pilot trials have reported high levels of acceptance. The overall design principles, approach, and testing methods are based on fundamental human factors principles designed to reduce user effort and error and are readily generalizable. © 2012 Diabetes Technology Society.

Interface Design and Human Factors Considerations for Model-Based Tight Glycemic Control in Critical Care

PubMed Central

Ward, Logan; Steel, James; Le Compte, Aaron; Evans, Alicia; Tan, Chia-Siong; Penning, Sophie; Shaw, Geoffrey M; Desaive, Thomas; Chase, J Geoffrey

2012-01-01

Introduction Tight glycemic control (TGC) has shown benefits but has been difficult to implement. Model-based methods and computerized protocols offer the opportunity to improve TGC quality and compliance. This research presents an interface design to maximize compliance, minimize real and perceived clinical effort, and minimize error based on simple human factors and end user input. Method The graphical user interface (GUI) design is presented by construction based on a series of simple, short design criteria based on fundamental human factors engineering and includes the use of user feedback and focus groups comprising nursing staff at Christchurch Hospital. The overall design maximizes ease of use and minimizes (unnecessary) interaction and use. It is coupled to a protocol that allows nurse staff to select measurement intervals and thus self-manage workload. Results The overall GUI design is presented and requires only one data entry point per intervention cycle. The design and main interface are heavily focused on the nurse end users who are the predominant users, while additional detailed and longitudinal data, which are of interest to doctors guiding overall patient care, are available via tabs. This dichotomy of needs and interests based on the end user's immediate focus and goals shows how interfaces must adapt to offer different information to multiple types of users. Conclusions The interface is designed to minimize real and perceived clinical effort, and ongoing pilot trials have reported high levels of acceptance. The overall design principles, approach, and testing methods are based on fundamental human factors principles designed to reduce user effort and error and are readily generalizable. PMID:22401330

TTI CM/AQ evaluation model user`s guide and workshop training materials. Interim research report, September 1993-August 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-08-01

The TTI CM/AQ Evaluation Model evaluates potential projects based on the following criteria: eligibility, travel impacts, emission impacts, and cost-effectiveness. To compare independent projects within a region during the decision process for CM/AQ funding, each project evaluated with this model is given an overall score based on the project`s effects for the criteria listed above. Training workshops were held by TTI in the first quarter of 1995 to teach metropolitan planning organization, state department of transportation, and regional air quality organization staff how to use this model. Basics of sketch-planning applications were also taught. The DRCOG and TTI CM/AQ Evaluationmore » Models represent significant steps toward the development of analytical methodologies for selecting projects for CM/AQ funding. Because the needs of nonattainment and attainment areas change over time, this model is particularly useful as key evaluation criteria can be modified to reflect the changing needs of a metropolitan area.« less

Service User- and Carer-Reported Measures of Involvement in Mental Health Care Planning: Methodological Quality and Acceptability to Users

PubMed Central

Gibbons, Chris J.; Bee, Penny E.; Walker, Lauren; Price, Owen; Lovell, Karina

2014-01-01

Background: Increasing service user and carer involvement in mental health care planning is a key healthcare priority but one that is difficult to achieve in practice. To better understand and measure user and carer involvement, it is crucial to have measurement questionnaires that are both psychometrically robust and acceptable to the end user. Methods: We conducted a systematic review using the terms “care plan$,” “mental health,” “user perspective$,” and “user participation” and their linguistic variants as search terms. Databases were searched from inception to November 2012, with an update search at the end of September 2014. We included any articles that described the development, validation or use of a user and/or carer-reported outcome measures of involvement in mental health care planning. We assessed the psychometric quality of each instrument using the “Evaluating the Measurement of Patient-Reported Outcomes” (EMPRO) criteria. Acceptability of each instrument was assessed using novel criteria developed in consultation with a mental health service user and carer consultation group. Results: We identified eleven papers describing the use, development, and/or validation of nine user/carer-reported outcome measures. Psychometric properties were sparsely reported and the questionnaires met few service user/carer-nominated attributes for acceptability. Where reported, basic psychometric statistics were of good quality, indicating that some measures may perform well if subjected to more rigorous psychometric tests. The majority were deemed to be too long for use in practice. Discussion: Multiple instruments are available to measure user/carer involvement in mental health care planning but are either of poor quality or poorly described. Existing measures cannot be considered psychometrically robust by modern standards, and cannot currently be recommended for use. Our review has identified an important knowledge gap, and an urgent need to develop new user and carer measures of care-planning involvement. PMID:25566099

Evaluation of products and services of a nursing library: user satisfaction.

PubMed

Cozin, Sheila Kátia; Turrini, Ruth Natalia Teresa

2008-01-01

The goal of the study was to evaluate the quality of the services provided by the library at the Nursing School of the University of São Paulo. A questionnaire evaluating users' satisfaction with the service was employed, covering five quality components: tangibles, reliability, responsiveness, assurance and empathy. The Satisfaction Rate was calculated through the degree of importance in relation to satisfaction. The analysis of the open-ended answers was quanti-qualitative. For Reliability and Empathy, the users showed dissatisfaction with the training for bibliographic research and the librarian's willingness to meet the clients' information needs, respectively. Responsiveness did not fully satisfy the users, disagreeing with the providers. However, both agreed that the archives are outdated. Among the tangible aspects, equipment and noise were criticized most often. The results show that the library offers good service quality to its users.

Smart homes to improve the quality of life for all.

PubMed

Aiello, Marco; Aloise, Fabio; Baldoni, Roberto; Cincotti, Febo; Guger, Christoph; Lazovik, Alexander; Mecella, Massimo; Pucci, Paolo; Rinsma, Johanna; Santucci, Giuseppe; Taglieri, Massimiliano

2011-01-01

A home is smart when, being aware of its own state and that of its users, is capable of controlling itself in order to support the user wishes and thus improving their quality of life. This holds both for users with special needs and for those with ordinary domestic needs. In this paper, we overview the Smart Homes for All project which represents the current state of the art with respect to software control and user interfaces in the smart homes arena.

Computer users' ergonomics and quality of life - evidence from a developing country.

PubMed

Ahmed, Ishfaq; Shaukat, Muhammad Zeeshan

2018-06-01

This study is aimed at investigating the quality of workplace ergonomics at various Pakistani organizations and quality of life of computer users working in these organizations. Two hundred and thirty-five computer users (only those employees who have to do most of their job tasks on computer or laptop, and at their office) responded by filling the questionnaire covering questions on workplace ergonomics and quality of life. Findings of the study revealed the ergonomics at those organizations was poor and unfavourable. The quality of life (both physical and mental health of the employees) of respondents was poor for employees who had unfavourable ergonomic environment. The findings thus highlight an important issue prevalent at Pakistani work settings.

Ecstasy use and self-reported disturbances in sleep.

PubMed

Ogeil, Rowan P; Rajaratnam, Shantha M W; Phillips, James G; Redman, Jennifer R; Broadbear, Jillian H

2011-10-01

Ecstasy users report a number of complaints after its use including disturbed sleep. However, little is known regarding which attributes of ecstasy use are associated with sleep disturbances, which domains of sleep are affected or which factors may predict those ecstasy users likely to have poor sleep quality and/or excessive daytime sleepiness. This study examined questionnaire responses of social drug users (n = 395) to the Pittsburgh Sleep Quality Index and the Epworth Sleepiness Scale. A significant proportion of ecstasy users (69.5%) had Pittsburgh Sleep Quality Index scores above the threshold used to identify sleep disturbance. Although frequency of ecstasy use did not affect the degree of reported sleep disturbance, participants who used larger amounts of ecstasy had poorer sleep. In addition, participants who perceived harmful consequences arising from their ecstasy use or had experienced remorse following ecstasy use had poorer sleep. Clinically relevant levels of sleep disturbance were still evident after controlling for polydrug use. Risk factors for poor sleep quality were younger age, injury post-ecstasy use and having been told to cut down on ecstasy use. Many ecstasy users report poor sleep quality, which likely contributes to the negative effects reported following ecstasy use. Copyright © 2011 John Wiley & Sons, Ltd.

Distance Learners' Perspective on User-Friendly Instructional Materials at the University of Zambia

ERIC Educational Resources Information Center

Simui, F.; Thompson, L. C.; Mundende, K.; Mwewa, G.; Kakana, F.; Chishiba, A.; Namangala, B.

2017-01-01

This case study focuses on print-based instructional materials available to distance education learners at the University of Zambia. Using the Visual Paradigm Software, we model distance education learners' voices into sociograms to make a contribution to the ongoing discourse on quality distance learning in poorly resourced communities. Emerging…

Mechanistic-Empirical Pavement Design Guide Flexible Pavement Performance Prediction Models Volume III Field Guide - Calibration and User's Guide for the Mechanistic-Empirical Pavement Design Guide

DOT National Transportation Integrated Search

2007-08-01

The objective of this research study was to develop performance characteristics or variables (e.g., ride quality, rutting, : fatigue cracking, transverse cracking) of flexible pavements in Montana, and to use these characteristics in the : implementa...

Inclusive Design: Developing Students' Knowledge and Attitude through Empathic Modelling

ERIC Educational Resources Information Center

Altay, Burçak; Demirkan, Halime

2014-01-01

To enhance the function and quality of built environments, designers should consider all possible users in their design projects. Therefore, it is essential to incorporate inclusive design in the education of the design student. This study focuses on the educational objectives of and related learning activities in a course where inclusive design…

Mindtagger: A Demonstration of Data Labeling in Knowledge Base Construction.

PubMed

Shin, Jaeho; Ré, Christopher; Cafarella, Michael

2015-08-01

End-to-end knowledge base construction systems using statistical inference are enabling more people to automatically extract high-quality domain-specific information from unstructured data. As a result of deploying DeepDive framework across several domains, we found new challenges in debugging and improving such end-to-end systems to construct high-quality knowledge bases. DeepDive has an iterative development cycle in which users improve the data. To help our users, we needed to develop principles for analyzing the system's error as well as provide tooling for inspecting and labeling various data products of the system. We created guidelines for error analysis modeled after our colleagues' best practices, in which data labeling plays a critical role in every step of the analysis. To enable more productive and systematic data labeling, we created Mindtagger, a versatile tool that can be configured to support a wide range of tasks. In this demonstration, we show in detail what data labeling tasks are modeled in our error analysis guidelines and how each of them is performed using Mindtagger.

Measuring the Quality of the u-Learning Service Using the Zone of Tolerance SERVQUAL

NASA Astrophysics Data System (ADS)

Kim, Seong Jin; Park, Keon Chul; Seo, Hyun Sik; Lee, Bong Gyou

The purpose of this study is to analyze diverse factors that affect service quality of Digital textbook service. The ZOT(Zone of Tolerance) SERVQUAL has been applied to develop the research model. Users of the Digital textbook service were selected as subjects for the sample frame. A total of 115 surveys from over 112 schools were collected and used as data for analysis. Results of the survey by SPSS Win Ver. 12.0 showed that the perceived level of service quality in terms of reliability is particularly low, and is quite different from adequate quality. This paper suggests useful guidelines to education providers for improving their public u-Learning environment.

Can Simulation Credibility Be Improved Using Sensitivity Analysis to Understand Input Data Effects on Model Outcome?

NASA Technical Reports Server (NTRS)

Myers, Jerry G.; Young, M.; Goodenow, Debra A.; Keenan, A.; Walton, M.; Boley, L.

2015-01-01

Model and simulation (MS) credibility is defined as, the quality to elicit belief or trust in MS results. NASA-STD-7009 [1] delineates eight components (Verification, Validation, Input Pedigree, Results Uncertainty, Results Robustness, Use History, MS Management, People Qualifications) that address quantifying model credibility, and provides guidance to the model developers, analysts, and end users for assessing the MS credibility. Of the eight characteristics, input pedigree, or the quality of the data used to develop model input parameters, governing functions, or initial conditions, can vary significantly. These data quality differences have varying consequences across the range of MS application. NASA-STD-7009 requires that the lowest input data quality be used to represent the entire set of input data when scoring the input pedigree credibility of the model. This requirement provides a conservative assessment of model inputs, and maximizes the communication of the potential level of risk of using model outputs. Unfortunately, in practice, this may result in overly pessimistic communication of the MS output, undermining the credibility of simulation predictions to decision makers. This presentation proposes an alternative assessment mechanism, utilizing results parameter robustness, also known as model input sensitivity, to improve the credibility scoring process for specific simulations.

A web-based spatial decision supporting system (S-DSS) for grapevine quality: the viticultural tool of the SOILCONS-WEB Project

NASA Astrophysics Data System (ADS)

Manna, Piero; Bonfante, Antonello; Basile, Angelo; Langella, Giuliano; Agrillo, Antonietta; De Mascellis, Roberto; Florindo Mileti, Antonio; Minieri, Luciana; Orefice, Nadia; Terribile, Fabio

2014-05-01

The SOILCONSWEB Project aims to create a decision support system operating at the landscape scale (Spatial-DSS) for the protection and the management of soils in both agricultural and environmental issues; it is a cyber-infrastructure built on remote servers operating through the web at www.landconsultingweb.eu. It includes - among others - a series of tools specifically designed to a Viticulture aiming at high quality wines production. The system is realized thanks to a collaboration between the University of Naples Federico II, CNR ISAFoM, Ariespace srl and SeSIRCA-Campania Region within a 5-years LIFE+ project funded by European Community. The system includes tools based on modelling procedures at different level of complexity some of which specifically designed for viticulture issues. One of the implemented models arise from the original desktop based SWAP model (Kroes et al, 2008). It can be run "on the fly" through a very user friendly web-interface. The specific tool, thanks to the model based on the Richard's equation can produce data on vineyard water stress, simulating the soil water balances of the different soil types within an area of interest. Thanks to a specific program developed within the project activities, the Spatial-DSS every day acquires punctual weather data and automatically spatialize them with geostatistical approaches in order to use the data as input for the SPA (Soil Plant Atmosphere ) model running. In particular for defining the upper boundary condition (rainfall and temperatures to estimate ET0 by the Hargraves model). Soil hydraulic properties (47 soil profiles within the study area), also essential for modelling simulation, were measured in laboratory using the Wind's approach or estimated through HYPRES PTF. Water retention and hydraulic conductivity relationships were parameterized according to the van Genuchten-Mualem model; Decision makers (individuals, groups of interests and public bodies) through the DSS can have real-time (or near real-time) access to critical, accurate, complete and up-to-date spatial data/output models held/processed in multiple data stores. The system allows the users interested in viticulture to have free, easy and immediate access to a number of environmental data and information very useful for quality wines production and especially for viticulture planning and management in a context of environmental sustainability. It produces detailed spatial documents, report and maps on a series of questions including the identification and description of terroir characteristics. The user once connected to the S-DSS can select an area of interest (i.e. farm, municipality, district) or draw it and obtain in real time a series of detailed information regarding that specific area, including maps and reports of landscape physical factors (i.e. soils, climate, geology, geomorphology, etc.), viticulture suitability, plant disease data and modelling, trends of viticulture years, bioclimatic indexes, etc. The user can also choose between different options such as the time period of the simulation runs or the type of data (maps, report or graphs) to be produced by the system. The S-DSS is being developed, tested and applied in an area of about 20,000 ha in south of Italy (Valle Telesina, in Campania region) mainly vocated to quality wines production (designation of origin DOC and DOCG). Key words: Decision Support System, spatial data, model simulation, soil hydrological properties, cyber infrastructure.

The relationship between health literacy and quality of life among frequent users of health care services: a cross-sectional study.

PubMed

Couture, Éva Marjorie; Chouinard, Maud-Christine; Fortin, Martin; Hudon, Catherine

2017-07-06

Although health literacy and quality of life are important concepts in health care, the link between them is unclear, especially for a population of frequent users of health care services with chronic diseases. Low health literacy is a common problem that has been linked to several negative health outcomes. Quality of life is an important health outcome in patient-centered care. Frequent users of health care services are a vulnerable population that deserves attention due to high costs and negative outcomes such as lower quality of life and higher mortality. The objective of this study was to examine the relationship between health literacy and the physical and mental components of quality of life among frequent users of health care services with chronic diseases. This study presents the cross-sectional analysis of data collected through the V1SAGES project, a randomized controlled trial on the effectiveness of a case management intervention in primary care in Quebec, Canada. Participants (n = 247) were frequent users of health care services presenting at least one chronic condition. Health literacy was measured by the Newest Vital Sign (NVS), and the physical and mental components of quality of life were evaluated by the Short Form Health Survey Version 2 (SF-12v2). The association between health literacy (independent variable) and the physical and mental components of quality of life was examined using biserial correlation. No association was found between health literacy and quality of life (physical component: r = 0.108, ρ = 0.11; mental component: r = 0.147, ρ = 0.15). This study suggests that there is no relationship between health literacy and the physical and mental components of quality of life among frequent users of health care services. NCT01719991 . Registered October 25, 2012.

ProTSAV: A protein tertiary structure analysis and validation server.

PubMed

Singh, Ankita; Kaushik, Rahul; Mishra, Avinash; Shanker, Asheesh; Jayaram, B

2016-01-01

Quality assessment of predicted model structures of proteins is as important as the protein tertiary structure prediction. A highly efficient quality assessment of predicted model structures directs further research on function. Here we present a new server ProTSAV, capable of evaluating predicted model structures based on some popular online servers and standalone tools. ProTSAV furnishes the user with a single quality score in case of individual protein structure along with a graphical representation and ranking in case of multiple protein structure assessment. The server is validated on ~64,446 protein structures including experimental structures from RCSB and predicted model structures for CASP targets and from public decoy sets. ProTSAV succeeds in predicting quality of protein structures with a specificity of 100% and a sensitivity of 98% on experimentally solved structures and achieves a specificity of 88%and a sensitivity of 91% on predicted protein structures of CASP11 targets under 2Å.The server overcomes the limitations of any single server/method and is seen to be robust in helping in quality assessment. ProTSAV is freely available at http://www.scfbio-iitd.res.in/software/proteomics/protsav.jsp. Copyright © 2015 Elsevier B.V. All rights reserved.

Users' demographic profile and quality attributes of bus services: The perspectives of users, operators and local authorities

NASA Astrophysics Data System (ADS)

Noh, Nur'Amirah Mhd.; Hamid, Ahmad Hilmy Abd

2017-10-01

Bus services that can help meet almost every bus user's needs are the goals of bus operators. Despite such an idealistic view, the operators themselves, users and even the local authorities have been found to hold different views about the quality of service that the bus should deliver. As the users i.e., customers are considered as important stakeholders, understanding their characteristics, profile and pattern is very crucial. To this end, the present study has attempted to gauge the perspectives of all the above-mentioned stakeholders. For the users, a customer satisfaction survey was employed to look into the relative influence of service attributes. In addition, surveys were also administered to bus operators and local authorities to study their perspectives in relation to this matter. 450 randomly selected respondents were surveyed. Identification of the service level was analyzed through the Likert scale whereas the perspectives of the operators and authorities were dealt with through mean value Analysis. Specifically, this study aims to identify the crucial attributes in determining the quality of the bus services. Findings of the study indicated that different attributes were selected by users, operators and authorities, which clearly enlightened the variations of the important attributes in determining the level of bus service quality. In its attempt to compare the service level attributes from three perspectives, this study has helped advance better improvement and strategies for the urban public bus operators and planners, in addition to the authorities in delivering user-friendly bus services by taking into account the local context, user profile and demographic characteristics.

Water quality modelling of Jadro spring.

PubMed

Margeta, J; Fistanic, I

2004-01-01

Management of water quality in karst is a specific problem. Water generally moves very fast by infiltration processes but far more by concentrated flows through fissures and openings in karst. This enables the entire surface pollution to be transferred fast and without filtration into groundwater springs. A typical example is the Jadro spring. Changes in water quality at the spring are sudden, but short. Turbidity as a major water quality problem for the karst springs regularly exceeds allowable standards. Former practice in problem solving has been reduced to intensive water disinfection in periods of great turbidity without analyses of disinfection by-products risks for water users. The main prerequisite for water quality control and an optimization of water disinfection is the knowledge of raw water quality and nature of occurrence. The analysis of monitoring data and their functional relationship with hydrological parameters enables establishment of a stochastic model that will help obtain better information on turbidity in different periods of the year. Using the model a great number of average monthly and extreme daily values are generated. By statistical analyses of these data possibility of occurrence of high turbidity in certain months is obtained. This information can be used for designing expert system for water quality management of karst springs. Thus, the time series model becomes a valuable tool in management of drinking water quality of the Jadro spring.

Short-Term Effect of Two Semi-Occluded Vocal Tract Training Programs on the Vocal Quality of Future Occupational Voice Users: "Resonant Voice Training Using Nasal Consonants" Versus "Straw Phonation".

PubMed

Meerschman, Iris; Van Lierde, Kristiane; Peeters, Karen; Meersman, Eline; Claeys, Sofie; D'haeseleer, Evelien

2017-09-18

The purpose of this study was to determine the short-term effect of 2 semi-occluded vocal tract training programs, "resonant voice training using nasal consonants" versus "straw phonation," on the vocal quality of vocally healthy future occupational voice users. A multigroup pretest-posttest randomized control group design was used. Thirty healthy speech-language pathology students with a mean age of 19 years (range: 17-22 years) were randomly assigned into a resonant voice training group (practicing resonant exercises across 6 weeks, n = 10), a straw phonation group (practicing straw phonation across 6 weeks, n = 10), or a control group (receiving no voice training, n = 10). A voice assessment protocol consisting of both subjective (questionnaire, participant's self-report, auditory-perceptual evaluation) and objective (maximum performance task, aerodynamic assessment, voice range profile, acoustic analysis, acoustic voice quality index, dysphonia severity index) measurements and determinations was used to evaluate the participants' voice pre- and posttraining. Groups were compared over time using linear mixed models and generalized linear mixed models. Within-group effects of time were determined using post hoc pairwise comparisons. No significant time × group interactions were found for any of the outcome measures, indicating no differences in evolution over time among the 3 groups. Within-group effects of time showed a significant improvement in dysphonia severity index in the resonant voice training group, and a significant improvement in the intensity range in the straw phonation group. Results suggest that the semi-occluded vocal tract training programs using resonant voice training and straw phonation may have a positive impact on the vocal quality and vocal capacities of future occupational voice users. The resonant voice training caused an improved dysphonia severity index, and the straw phonation training caused an expansion of the intensity range in this population.

Guideline appraisal with AGREE II: Systematic review of the current evidence on how users handle the 2 overall assessments.

PubMed

Hoffmann-Eßer, Wiebke; Siering, Ulrich; Neugebauer, Edmund A M; Brockhaus, Anne Catharina; Lampert, Ulrike; Eikermann, Michaela

2017-01-01

The Appraisal of Guidelines for Research & Evaluation (AGREE) II instrument is the most commonly used guideline appraisal tool. It includes 23 appraisal criteria (items) organized within 6 domains and 2 overall assessments (1. overall guideline quality; 2. recommendation for use). The aim of this systematic review was twofold. Firstly, to investigate how often AGREE II users conduct the 2 overall assessments. Secondly, to investigate the influence of the 6 domain scores on each of the 2 overall assessments. A systematic bibliographic search was conducted for publications reporting guideline appraisals with AGREE II. The impact of the 6 domain scores on the overall assessment of guideline quality was examined using a multiple linear regression model. Their impact on the recommendation for use (possible answers: "yes", "yes, with modifications", "no") was examined using a multinomial regression model. 118 relevant publications including 1453 guidelines were identified. 77.1% of the publications reported results for at least one overall assessment, but only 32.2% reported results for both overall assessments. The results of the regression analyses showed a statistically significant influence of all domains on overall guideline quality, with Domain 3 (rigour of development) having the strongest influence. For the recommendation for use, the results showed a significant influence of Domains 3 to 5 ("yes" vs. "no") and Domains 3 and 5 ("yes, with modifications" vs. "no"). The 2 overall assessments of AGREE II are underreported by guideline assessors. Domains 3 and 5 have the strongest influence on the results of the 2 overall assessments, while the other domains have a varying influence. Within a normative approach, our findings could be used as guidance for weighting individual domains in AGREE II to make the overall assessments more objective. Alternatively, a stronger content analysis of the individual domains could clarify their importance in terms of guideline quality. Moreover, AGREE II should require users to transparently present how they conducted the assessments.

QADATA user's manual; an interactive computer program for the retrieval and analysis of the results from the external blind sample quality- assurance project of the U.S. Geological Survey

USGS Publications Warehouse

Lucey, K.J.

1990-01-01

The U.S. Geological Survey conducts an external blind sample quality assurance project for its National Water Quality Laboratory in Denver, Colorado, based on the analysis of reference water samples. Reference samples containing selected inorganic and nutrient constituents are disguised as environmental samples at the Survey 's office in Ocala, Florida, and are sent periodically through other Survey offices to the laboratory. The results of this blind sample project indicate the quality of analytical data produced by the laboratory. This report provides instructions on the use of QADATA, an interactive, menu-driven program that allows users to retrieve the results of the blind sample quality- assurance project. The QADATA program, which is available on the U.S. Geological Survey 's national computer network, accesses a blind sample data base that contains more than 50,000 determinations from the last five water years for approximately 40 constituents at various concentrations. The data can be retrieved from the database for any user- defined time period and for any or all available constituents. After the user defines the retrieval, the program prepares statistical tables, control charts, and precision plots and generates a report which can be transferred to the user 's office through the computer network. A discussion of the interpretation of the program output is also included. This quality assurance information will permit users to document the quality of the analytical results received from the laboratory. The blind sample data is entered into the database within weeks after being produced by the laboratory and can be retrieved to meet the needs of specific projects or programs. (USGS)

What do web-use skill differences imply for online health information searches?

PubMed

Feufel, Markus A; Stahl, S Frederica

2012-06-13

Online health information is of variable and often low scientific quality. In particular, elderly less-educated populations are said to struggle in accessing quality online information (digital divide). Little is known about (1) how their online behavior differs from that of younger, more-educated, and more-frequent Web users, and (2) how the older population may be supported in accessing good-quality online health information. To specify the digital divide between skilled and less-skilled Web users, we assessed qualitative differences in technical skills, cognitive strategies, and attitudes toward online health information. Based on these findings, we identified educational and technological interventions to help Web users find and access good-quality online health information. We asked 22 native German-speaking adults to search for health information online. The skilled cohort consisted of 10 participants who were younger than 30 years of age, had a higher level of education, and were more experienced using the Web than 12 participants in the less-skilled cohort, who were at least 50 years of age. We observed online health information searches to specify differences in technical skills and analyzed concurrent verbal protocols to identify health information seekers' cognitive strategies and attitudes. Our main findings relate to (1) attitudes: health information seekers in both cohorts doubted the quality of information retrieved online; among poorly skilled seekers, this was mainly because they doubted their skills to navigate vast amounts of information; once a website was accessed, quality concerns disappeared in both cohorts, (2) technical skills: skilled Web users effectively filtered information according to search intentions and data sources; less-skilled users were easily distracted by unrelated information, and (3) cognitive strategies: skilled Web users searched to inform themselves; less-skilled users searched to confirm their health-related opinions such as "vaccinations are harmful." Independent of Web-use skills, most participants stopped a search once they had found the first piece of evidence satisfying search intentions, rather than according to quality criteria. Findings related to Web-use skills differences suggest two classes of interventions to facilitate access to good-quality online health information. Challenges related to findings (1) and (2) should be remedied by improving people's basic Web-use skills. In particular, Web users should be taught how to avoid information overload by generating specific search terms and to avoid low-quality information by requesting results from trusted websites only. Problems related to finding (3) may be remedied by visually labeling search engine results according to quality criteria.

Objective Quality and Intelligibility Prediction for Users of Assistive Listening Devices

PubMed Central

Falk, Tiago H.; Parsa, Vijay; Santos, João F.; Arehart, Kathryn; Hazrati, Oldooz; Huber, Rainer; Kates, James M.; Scollie, Susan

2015-01-01

This article presents an overview of twelve existing objective speech quality and intelligibility prediction tools. Two classes of algorithms are presented, namely intrusive and non-intrusive, with the former requiring the use of a reference signal, while the latter does not. Investigated metrics include both those developed for normal hearing listeners, as well as those tailored particularly for hearing impaired (HI) listeners who are users of assistive listening devices (i.e., hearing aids, HAs, and cochlear implants, CIs). Representative examples of those optimized for HI listeners include the speech-to-reverberation modulation energy ratio, tailored to hearing aids (SRMR-HA) and to cochlear implants (SRMR-CI); the modulation spectrum area (ModA); the hearing aid speech quality (HASQI) and perception indices (HASPI); and the PErception MOdel - hearing impairment quality (PEMO-Q-HI). The objective metrics are tested on three subjectively-rated speech datasets covering reverberation-alone, noise-alone, and reverberation-plus-noise degradation conditions, as well as degradations resultant from nonlinear frequency compression and different speech enhancement strategies. The advantages and limitations of each measure are highlighted and recommendations are given for suggested uses of the different tools under specific environmental and processing conditions. PMID:26052190

AnatomicalTerms.info: heading for an online solution to the anatomical synonym problem hurdles in data-reuse from the Terminologia Anatomica and the foundational model of anatomy and potentials for future development.

PubMed

Gobée, O Paul; Jansma, Daniël; DeRuiter, Marco C

2011-10-01

The many synonyms for anatomical structures confuse medical students and complicate medical communication. Easily accessible translations would alleviate this problem. None of the presently available resources-Terminologia Anatomica (TA), digital terminologies such as the Foundational Model of Anatomy (FMA), and websites-are fully satisfactory to this aim. Internet technologies offer new possibilities to solve the problem. Several authors have called for an online TA. An online translation resource should be easily accessible, user-friendly, comprehensive, expandable, and its quality determinable. As first step towards this goal, we built a translation website that we named www.AnatomicalTerms.info, based on the database of the FMA. It translates between English, Latin, eponyms, and to a lesser extent other languages, and presently contains over 31,000 terms for 7,250 structures, covering 95% of TA. In addition, it automatically presents searches for images, documents and anatomical variations regarding the sought structure. Several terminological and conceptual issues were encountered in transferring data from TA and FMA into AnatomicalTerms.info, resultant from these resources' different set-ups (paper versus digital) and targets (machine versus human-user). To the best of our knowledge, AnatomicalTerms.info is unique in its combination of user-friendliness and comprehensiveness. As next step, wiki-like expandability will be added to enable open contribution of clinical synonyms and terms in different languages. Specific quality measures will be taken to strike a balance between open contribution and quality assurance. AnatomicalTerms.info's mechanism that "translates" terms to structures furthermore may enhance targeted searching by linking images, descriptions, and other anatomical resources to the structures. Copyright © 2011 Wiley-Liss, Inc.

Multi-pollutant surface objective analyses and mapping of air quality health index over North America.

PubMed

Robichaud, Alain; Ménard, Richard; Zaïtseva, Yulia; Anselmo, David

2016-01-01

Air quality, like weather, can affect everyone, but responses differ depending on the sensitivity and health condition of a given individual. To help protect exposed populations, many countries have put in place real-time air quality nowcasting and forecasting capabilities. We present in this paper an optimal combination of air quality measurements and model outputs and show that it leads to significant improvements in the spatial representativeness of air quality. The product is referred to as multi-pollutant surface objective analyses (MPSOAs). Moreover, based on MPSOA, a geographical mapping of the Canadian Air Quality Health Index (AQHI) is also presented which provides users (policy makers, public, air quality forecasters, and epidemiologists) with a more accurate picture of the health risk anytime and anywhere in Canada and the USA. Since pollutants can also behave as passive atmospheric tracers, they provide information about transport and dispersion and, hence, reveal synoptic and regional meteorological phenomena. MPSOA could also be used to build air pollution climatology, compute local and national trends in air quality, and detect systematic biases in numerical air quality (AQ) models. Finally, initializing AQ models at regular time intervals with MPSOA can produce more accurate air quality forecasts. It is for these reasons that the Canadian Meteorological Centre (CMC) in collaboration with the Air Quality Research Division (AQRD) of Environment Canada has recently implemented MPSOA in their daily operations.

Application and Evaluation of Interactive 3D PDF for Presenting and Sharing Planning Results for Liver Surgery in Clinical Routine

PubMed Central

Newe, Axel; Becker, Linda; Schenk, Andrea

2014-01-01

Background & Objectives The Portable Document Format (PDF) is the de-facto standard for the exchange of electronic documents. It is platform-independent, suitable for the exchange of medical data, and allows for the embedding of three-dimensional (3D) surface mesh models. In this article, we present the first clinical routine application of interactive 3D surface mesh models which have been integrated into PDF files for the presentation and the exchange of Computer Assisted Surgery Planning (CASP) results in liver surgery. We aimed to prove the feasibility of applying 3D PDF in medical reporting and investigated the user experience with this new technology. Methods We developed an interactive 3D PDF report document format and implemented a software tool to create these reports automatically. After more than 1000 liver CASP cases that have been reported in clinical routine using our 3D PDF report, an international user survey was carried out online to evaluate the user experience. Results Our solution enables the user to interactively explore the anatomical configuration and to have different analyses and various resection proposals displayed within a 3D PDF document covering only a single page that acts more like a software application than like a typical PDF file (“PDF App”). The new 3D PDF report offers many advantages over the previous solutions. According to the results of the online survey, the users have assessed the pragmatic quality (functionality, usability, perspicuity, efficiency) as well as the hedonic quality (attractiveness, novelty) very positively. Conclusion The usage of 3D PDF for reporting and sharing CASP results is feasible and well accepted by the target audience. Using interactive PDF with embedded 3D models is an enabler for presenting and exchanging complex medical information in an easy and platform-independent way. Medical staff as well as patients can benefit from the possibilities provided by 3D PDF. Our results open the door for a wider use of this new technology, since the basic idea can and should be applied for many medical disciplines and use cases. PMID:25551375

Application and evaluation of interactive 3D PDF for presenting and sharing planning results for liver surgery in clinical routine.

PubMed

Newe, Axel; Becker, Linda; Schenk, Andrea

2014-01-01

The Portable Document Format (PDF) is the de-facto standard for the exchange of electronic documents. It is platform-independent, suitable for the exchange of medical data, and allows for the embedding of three-dimensional (3D) surface mesh models. In this article, we present the first clinical routine application of interactive 3D surface mesh models which have been integrated into PDF files for the presentation and the exchange of Computer Assisted Surgery Planning (CASP) results in liver surgery. We aimed to prove the feasibility of applying 3D PDF in medical reporting and investigated the user experience with this new technology. We developed an interactive 3D PDF report document format and implemented a software tool to create these reports automatically. After more than 1000 liver CASP cases that have been reported in clinical routine using our 3D PDF report, an international user survey was carried out online to evaluate the user experience. Our solution enables the user to interactively explore the anatomical configuration and to have different analyses and various resection proposals displayed within a 3D PDF document covering only a single page that acts more like a software application than like a typical PDF file ("PDF App"). The new 3D PDF report offers many advantages over the previous solutions. According to the results of the online survey, the users have assessed the pragmatic quality (functionality, usability, perspicuity, efficiency) as well as the hedonic quality (attractiveness, novelty) very positively. The usage of 3D PDF for reporting and sharing CASP results is feasible and well accepted by the target audience. Using interactive PDF with embedded 3D models is an enabler for presenting and exchanging complex medical information in an easy and platform-independent way. Medical staff as well as patients can benefit from the possibilities provided by 3D PDF. Our results open the door for a wider use of this new technology, since the basic idea can and should be applied for many medical disciplines and use cases.

SOCIB applications for oceanographic data management

NASA Astrophysics Data System (ADS)

Troupin, Charles; Pau Beltran, Joan; Frontera, Biel; Gómara, Sonia; Lora, Sebastian; March, David; Sebastian, Kristian; Tintoré, Joaquin

2015-04-01

The Balearic Islands Coastal Ocean Observing and Forecasting System (SOCIB, http://www.socib.es), is a multi-platform Marine Research Infrastructure that provides free, open and quality-controlled data from near-shore to the open sea. To collect the necessary data, the SOCIB system is made up of: a research vessel, a high-frequency (HF) radar system, weather stations, tide gauges, moorings, drifting buoys, ARGO profilers, and gliders (autonomous underwater vehicles). In addition, the system has recently begun incorporating oceanographic sensors attached to sea turtles. High-resolution numerical models provide forecast for hydrodynamics (ROMS) and waves (SAPO). According to SOCIB principles, data have to be: discoverable and accessible; freely available; interoperable, quality-controlled and standardized. The Data Centre (DC) manages the different steps of data processing, including: acquisition using SOCIB platforms (gliders, drifters, HF radar, ...), numerical models (hydrodynamics, waves, ...) or information generated by other data sources, distribution through dedicated web and mobile applications dynamic visualisation. The SOCIB DC constitutes an example of marine information systems within the framework of new coastal ocean observatories. In this work we present some of the applications developed for specific type of users, as well as the technologies used for their implementation: DAPP (Deployments application, http://apps.socib.es/dapp/), a web application to display information related to mobile platform trajectories. LW4NC2 (http://thredds.socib.es/lw4nc2), a web application for multidimensional (grid) data from NetCDF files (numerical models, HF radar). SACOSTA (http://gis.socib.es/sacosta), a viewer for cartographic data such as environmental sensitivity of the coastline. SEABOARD (http://seaboard.socib.es), a tool to disseminate SOCIB real time data to different types of users. Smart-phone apps to access data, platform trajectories and forecasts in real-time. In keeping with the objective of bringing relevant data to all kinds of users in a free and easy way, our future plans include the redesign of the applications to improve the user experience, along with the creation of applications specific to different groups of users, including tourists, sailors, surfers, and others.

SoRS: Social recommendation using global rating reputation and local rating similarity

NASA Astrophysics Data System (ADS)

Qian, Fulan; Zhao, Shu; Tang, Jie; Zhang, Yanping

2016-11-01

Recommendation is an important and also challenging problem in online social networks. It needs to consider not only users' personalized interests, but also social relations between users. Indeed, in practice, users are often inclined to accept recommendations from friends or opinion leaders (users with high reputations). In this paper, we present a novel recommendation framework, social recommendation using global rating reputation and local rating similarity, which combine user reputation and social similarity based on ratings. User reputation can be obtained by iteratively calculating the correlation of historical ratings of user and intrinsic qualities of items. We view the user reputation as the user's global influence and the similarity based on rating of social relation as the user's local influence, introduce it in the basic social recommender model. Thus users with high reputation have a strong influence on the others, and on the other hand, the effect of a user with low reputation has been weakened. The recommendation accuracy of proposed framework can be improved by effectively removing nature noise because of less rigorous user ratings and strengthening the effect of user influence with high reputation. We also improve the similarity based on ratings by avoiding the high similarity with the less common ratings between friends. We evaluate our approach on three datasets including Movielens, Epinions and Douban. Empirical results demonstrate that proposed framework achieves significant improvements on recommendation accuracy. User reputation and local similarity which are both based on ratings have a lot of helpful in improvement of prediction accuracy. The reputation also can help to improve the recommendation precision with the small training sets.

Comprehensive Evaluation of Electronic Medical Record System Use and User Satisfaction at Five Low-Resource Setting Hospitals in Ethiopia

PubMed Central

Fritz, Fleur

2015-01-01

Background Electronic medical record (EMR) systems are increasingly being implemented in hospitals of developing countries to improve patient care and clinical service. However, only limited evaluation studies are available concerning the level of adoption and determinant factors of success in those settings. Objective The objective of this study was to assess the usage pattern, user satisfaction level, and determinants of health professional’s satisfaction towards a comprehensive EMR system implemented in Ethiopia where parallel documentation using the EMR and the paper-based medical records is in practice. Methods A quantitative, cross-sectional study design was used to assess the usage pattern, user satisfaction level, and determinant factors of an EMR system implemented in Ethiopia based on the DeLone and McLean model of information system success. Descriptive statistical methods were applied to analyze the data and a binary logistic regression model was used to identify determinant factors. Results Health professionals (N=422) from five hospitals were approached and 406 responded to the survey (96.2% response rate). Out of the respondents, 76.1% (309/406) started to use the system immediately after implementation and user training, but only 31.7% (98/309) of the professionals reported using the EMR during the study (after 3 years of implementation). Of the 12 core EMR functions, 3 were never used by most respondents, and they were also unaware of 4 of the core EMR functions. It was found that 61.4% (190/309) of the health professionals reported over all dissatisfaction with the EMR (median=4, interquartile range (IQR)=1) on a 5-level Likert scale. Physicians were more dissatisfied (median=5, IQR=1) when compared to nurses (median=4, IQR=1) and the health management information system (HMIS) staff (median=2, IQR=1). Of all the participants, 64.4% (199/309) believed that the EMR had no positive impact on the quality of care. The participants indicated an agreement with the system and information quality (median=2, IQR=0.5) but strongly disagreed with the service quality (median=5, IQR=1). The logistic regression showed a strong correlation between system use and dissatisfaction (OR 7.99, 95% CI 5.62-9.10) and service quality and satisfaction (OR 8.23, 95% CI 3.23-17.01). Conclusions Health professionals’ use of the EMR is low and they are generally dissatisfied with the service of the implemented system. The results of this study show that this dissatisfaction is caused mainly and strongly by the poor service quality, the current practice of double documentation (EMR and paper-based), and partial departmental use of the system in the hospitals. Thus, future interventions to improve the current use or future deployment projects should focus on improving the service quality such as power infrastructure, user support, trainings, and more computers in the wards. After service quality improvement, other departments (especially inter-dependent departments) should be motivated and supported to use the EMR to avoid the dependency deadlock. PMID:26007237

Systems Modeling to Improve River, Riparian, and Wetland Habitat Quality and Area

NASA Astrophysics Data System (ADS)

Alafifi, A.

2016-12-01

The suitability of watershed habitat to support the livelihood of its biota primarily depends on managing flow. Ecological restoration requires finding opportunities to reallocate available water in a watershed to increase ecological benefits and maintain other beneficial uses. We present the Watershed Area of Suitable Habitat (WASH) systems model that recommends reservoir releases, streamflows, and water allocations throughout a watershed to maximize the ecosystem habitat quality. WASH embeds and aggregates area-weighted metrics for aquatic, floodplain, and wetland habitat components as an ecosystem objective to maximize, while maintaining water deliveries for domestic and agricultural uses, mass balance, and available budget for restoration actions. The metrics add spatial and temporal functionality and area coverage to traditional habitat quality indexes and can accommodate multiple species of concern. We apply the WASH model to the Utah portion of the Bear River watershed which includes 8 demand sites, 5 reservoirs and 37 nodes between the Utah-Idaho state line and the Great Salt Lake. We recommend water allocations to improve current conservation efforts and show tradeoffs between human and ecosystem uses of water. WASH results are displayed on an open-source web mapping application that allows stakeholders to access, visualize, and interact with the model data and results and compare current and model-recommended operations. Results show that the Bear River is largely developed and appropriated for human water uses. However, increasing reservoirs winter and early spring releases and minimizing late spring spill volumes can significantly improve habitat quality without harming agricultural or urban water users. The spatial and temporal reallocation of spring spills to environmental uses creates additional 70 thousand acres of suitable habitat in the watershed without harming human users. WASH also quantifies the potential environmental gains and losses from conserving water and from the impact of climate change on head flows and thus helps planning for the future of our water resources and ecosystem.

Development and evaluation of SOA-based AAL services in real-life environments: a case study and lessons learned.

PubMed

Stav, Erlend; Walderhaug, Ståle; Mikalsen, Marius; Hanke, Sten; Benc, Ivan

2013-11-01

The proper use of ICT services can support seniors in living independently longer. While such services are starting to emerge, current proprietary solutions are often expensive, covering only isolated parts of seniors' needs, and lack support for sharing information between services and between users. For developers, the challenge is that it is complex and time consuming to develop high quality, interoperable services, and new techniques are needed to simplify the development and reduce the development costs. This paper provides the complete view of the experiences gained in the MPOWER project with respect to using model-driven development (MDD) techniques for Service Oriented Architecture (SOA) system development in the Ambient Assisted Living (AAL) domain. To address this challenge, the approach of the European research project MPOWER (2006-2009) was to investigate and record the user needs, define a set of reusable software services based on these needs, and then implement pilot systems using these services. Further, a model-driven toolchain covering key development phases was developed to support software developers through this process. Evaluations were conducted both on the technical artefacts (methodology and tools), and on end user experience from using the pilot systems in trial sites. The outcome of the work on the user needs is a knowledge base recorded as a Unified Modeling Language (UML) model. This comprehensive model describes actors, use cases, and features derived from these. The model further includes the design of a set of software services, including full trace information back to the features and use cases motivating their design. Based on the model, the services were implemented for use in Service Oriented Architecture (SOA) systems, and are publicly available as open source software. The services were successfully used in the realization of two pilot applications. There is therefore a direct and traceable link from the user needs of the elderly, through the service design knowledge base, to the service and pilot implementations. The evaluation of the SOA approach on the developers in the project revealed that SOA is useful with respect to job performance and quality. Furthermore, they think SOA is easy to use and support development of AAL applications. An important finding is that the developers clearly report that they intend to use SOA in the future, but not for all type of projects. With respect to using model-driven development in web services design and implementation, the developers reported that it was useful. However, it is important that the code generated from the models is correct if the full potential of MDD should be achieved. The pilots and their evaluation in the trial sites showed that the services of the platform are sufficient to create suitable systems for end users in the domain. A SOA platform with a set of reusable domain services is a suitable foundation for more rapid development and tailoring of assisted living systems covering reoccurring needs among elderly users. It is feasible to realize a tool-chain for model-driven development of SOA applications in the AAL domain, and such a tool-chain can be accepted and found useful by software developers. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Air Vehicles Division Computational Structural Analysis Facilities Policy and Guidelines for Users

DTIC Science & Technology

2005-05-01

34 Thermal " as appropriate and the tolerance set to "default". b) Create the model geometry. c) Create the finite elements. d) Create the...linear, non-linear, dynamic, thermal , acoustic analysis. The modelling of composite materials, creep, fatigue and plasticity are also covered...perform professional, high quality finite element analysis (FEA). FE analysts from many tasks within AVD are using the facilities to conduct FEA with

User Access Management Based on Network Pricing for Social Network Applications

PubMed Central

Ma, Xingmin; Gu, Qing

2018-01-01

Social applications play a very important role in people’s lives, as users communicate with each other through social networks on a daily basis. This presents a challenge: How does one receive high-quality service from social networks at a low cost? Users can access different kinds of wireless networks from various locations. This paper proposes a user access management strategy based on network pricing such that networks can increase its income and improve service quality. Firstly, network price is treated as an optimizing access parameter, and an unascertained membership algorithm is used to make pricing decisions. Secondly, network price is adjusted dynamically in real time according to network load. Finally, selecting a network is managed and controlled in terms of the market economy. Simulation results show that the proposed scheme can effectively balance network load, reduce network congestion, improve the user's quality of service (QoS) requirements, and increase the network’s income. PMID:29495252

Water flow algorithm decision support tool for travelling salesman problem

NASA Astrophysics Data System (ADS)

Kamarudin, Anis Aklima; Othman, Zulaiha Ali; Sarim, Hafiz Mohd

2016-08-01

This paper discuss about the role of Decision Support Tool in Travelling Salesman Problem (TSP) for helping the researchers who doing research in same area will get the better result from the proposed algorithm. A study has been conducted and Rapid Application Development (RAD) model has been use as a methodology which includes requirement planning, user design, construction and cutover. Water Flow Algorithm (WFA) with initialization technique improvement is used as the proposed algorithm in this study for evaluating effectiveness against TSP cases. For DST evaluation will go through usability testing conducted on system use, quality of information, quality of interface and overall satisfaction. Evaluation is needed for determine whether this tool can assists user in making a decision to solve TSP problems with the proposed algorithm or not. Some statistical result shown the ability of this tool in term of helping researchers to conduct the experiments on the WFA with improvements TSP initialization.

What communication strategies do AAC users want their communication partners to use? A preliminary study.

PubMed

Midtlin, Hanne Sofie; Næss, Kari-Anne B; Taxt, Tone; Karlsen, Asgjerd Vea

2015-01-01

This study aims to investigate which communication strategies the people, who use augmentative and alternative communication (AAC), want their communication partners to use. We interviewed eight children using Talking Mats to examine the AAC users' own opinion. The results showed that they wanted their communication partners to take the initiative, to repair the breaks when communication breakdowns occurred, and to invest time in understanding what AAC users wanted to express. These results underlined the significant responsibility of communication partners and revealed the need for AAC user interventions to help them be active communicators. More research needs to emphasise AAC users' opinions about communication partner strategies to improve the communication processes for AAC-users and thereby promote social inclusion in natural environment. Implications for Rehabilitation Communication partner strategies can affect communication as well as personal development and life quality for augmentative and alternative communication (AAC) users. In AAC-users opinion, their communication partners should take the communicative initiative, repair the breaks when communication breakdowns occurred, and invest time in understanding what AAC-users want to express. There is a need to inform and educate communication partners, especially those unfamiliar to AAC users. Practical training sessions, clinician modelling and written materials may be helpful. A communication partner guide can be adapted to each individual AAC user who explains his or her communication preferences. Additionally, there is a need that the clinicians promote active rather than passive communication from AAC users, which requires that they have access to the necessary symbols.

Template-based protein structure modeling using the RaptorX web server.

PubMed

Källberg, Morten; Wang, Haipeng; Wang, Sheng; Peng, Jian; Wang, Zhiyong; Lu, Hui; Xu, Jinbo

2012-07-19

A key challenge of modern biology is to uncover the functional role of the protein entities that compose cellular proteomes. To this end, the availability of reliable three-dimensional atomic models of proteins is often crucial. This protocol presents a community-wide web-based method using RaptorX (http://raptorx.uchicago.edu/) for protein secondary structure prediction, template-based tertiary structure modeling, alignment quality assessment and sophisticated probabilistic alignment sampling. RaptorX distinguishes itself from other servers by the quality of the alignment between a target sequence and one or multiple distantly related template proteins (especially those with sparse sequence profiles) and by a novel nonlinear scoring function and a probabilistic-consistency algorithm. Consequently, RaptorX delivers high-quality structural models for many targets with only remote templates. At present, it takes RaptorX ~35 min to finish processing a sequence of 200 amino acids. Since its official release in August 2011, RaptorX has processed ~6,000 sequences submitted by ~1,600 users from around the world.

Template-based protein structure modeling using the RaptorX web server

PubMed Central

Källberg, Morten; Wang, Haipeng; Wang, Sheng; Peng, Jian; Wang, Zhiyong; Lu, Hui; Xu, Jinbo

2016-01-01

A key challenge of modern biology is to uncover the functional role of the protein entities that compose cellular proteomes. To this end, the availability of reliable three-dimensional atomic models of proteins is often crucial. This protocol presents a community-wide web-based method using RaptorX (http://raptorx.uchicago.edu/) for protein secondary structure prediction, template-based tertiary structure modeling, alignment quality assessment and sophisticated probabilistic alignment sampling. RaptorX distinguishes itself from other servers by the quality of the alignment between a target sequence and one or multiple distantly related template proteins (especially those with sparse sequence profiles) and by a novel nonlinear scoring function and a probabilistic-consistency algorithm. Consequently, RaptorX delivers high-quality structural models for many targets with only remote templates. At present, it takes RaptorX ~35 min to finish processing a sequence of 200 amino acids. Since its official release in August 2011, RaptorX has processed ~6,000 sequences submitted by ~1,600 users from around the world. PMID:22814390

BASINs 4.0 Climate Assessment Tool (CAT): Supporting ...

EPA Pesticide Factsheets

EPA announced the availability of the report, BASINS 4.0 Climate Assessment Tool (CAT): Supporting Documentation and User's Manual. This report was prepared by the EPA's Global Change Research Program (GCRP), an assessment-oriented program, that sits within the Office of Research and Development, that focuses on assessing how potential changes in climate and other global environmental stressors may impact water quality, air quality, aquatic ecosystems, and human health in the United States. The Program’s focus on water quality is consistent with the Research Strategy of the U.S. Climate Change Research Program—the federal umbrella organization for climate change science in the U.S. government—and is responsive to U.S. EPA’s mission and responsibilities as defined by the Clean Water Act and the Safe Drinking Water Act. A central goal of the EPA GCRP is to provide EPA program offices, Regions, and other stakeholders with tools and information for assessing and responding to any potential future impacts of climate change. In 2007, the EPA Global Change Research Program (GCRP), in partnership with the EPA Office of Water, supported development of a Climate Assessment Tool (CAT) for version 4 of EPA’s BASINS modeling system. This report provides supporting documentation and user support materials for the BASINS CAT tool. The purpose of this report is to provide in a single document a variety of documentation and user support materials supporting the use

The impact of software quality characteristics on healthcare outcome: a literature review.

PubMed

Aghazadeh, Sakineh; Pirnejad, Habibollah; Moradkhani, Alireza; Aliev, Alvosat

2014-01-01

The aim of this study was to discover the effect of software quality characteristics on healthcare quality and efficiency indicators. Through a systematic literature review, we selected and analyzed 37 original research papers to investigate the impact of the software indicators (coming from the standard ISO 9126 quality characteristics and sub-characteristics) on some of healthcare important outcome indicators and finally ranked these software indicators. The results showed that the software characteristics usability, reliability and efficiency were mostly favored in the studies, indicating their importance. On the other hand, user satisfaction, quality of patient care, clinical workflow efficiency, providers' communication and information exchange, patient satisfaction and care costs were among the healthcare outcome indicators frequently evaluated in relation to the mentioned software characteristics. Regression Logistic Method was the most common assessment methodology, and Confirmatory Factor Analysis and Structural Equation Modeling were performed to test the structural model's fit. The software characteristics were considered to impact the healthcare outcome indicators through other intermediate factors (variables).

GeoViQua: quality-aware geospatial data discovery and evaluation

NASA Astrophysics Data System (ADS)

Bigagli, L.; Papeschi, F.; Mazzetti, P.; Nativi, S.

2012-04-01

GeoViQua (QUAlity aware VIsualization for the Global Earth Observation System of Systems) is a recently started FP7 project aiming at complementing the Global Earth Observation System of Systems (GEOSS) with rigorous data quality specifications and quality-aware capabilities, in order to improve reliability in scientific studies and policy decision-making. GeoViQua main scientific and technical objective is to enhance the GEOSS Common Infrastructure (GCI) providing the user community with innovative quality-aware search and evaluation tools, which will be integrated in the GEO-Portal, as well as made available to other end-user interfaces. To this end, GeoViQua will promote the extension of the current standard metadata for geographic information with accurate and expressive quality indicators, also contributing to the definition of a quality label (GEOLabel). GeoViQua proposed solutions will be assessed in several pilot case studies covering the whole Earth Observation chain, from remote sensing acquisition to data processing, to applications in the main GEOSS Societal Benefit Areas. This work presents the preliminary results of GeoViQua Work Package 4 "Enhanced geo-search tools" (WP4), started in January 2012. Its major anticipated technical innovations are search and evaluation tools that communicate and exploit data quality information from the GCI. In particular, GeoViQua will investigate a graphical search interface featuring a coherent and meaningful aggregation of statistics and metadata summaries (e.g. in the form of tables, charts), thus enabling end users to leverage quality constraints for data discovery and evaluation. Preparatory work on WP4 requirements indicated that users need the "best" data for their purpose, implying a high degree of subjectivity in judgment. This suggests that the GeoViQua system should exploit a combination of provider-generated metadata (objective indicators such as summary statistics), system-generated metadata (contextual/tracking information such as provenance of data and metadata), and user-generated metadata (informal user comments, usage information, rating, etc.). Moreover, metadata should include sufficiently complete access information, to allow rich data visualization and propagation. The following main enabling components are currently identified within WP4: - Quality-aware access services, e.g. a quality-aware extension of the OGC Sensor Observation Service (SOS-Q) specification, to support quality constraints for sensor data publishing and access; - Quality-aware discovery services, namely a quality-aware extension of the OGC Catalog Service for the Web (CSW-Q), to cope with quality constrained search; - Quality-augmentation broker (GeoViQua Broker), to support the linking and combination of the existing GCI metadata with GeoViQua- and user-generated metadata required to support the users in selecting the "best" data for their intended use. We are currently developing prototypes of the above quality-enabled geo-search components, that will be assessed in a sensor-based pilot case study in the next months. In particular, the GeoViQua Broker will be integrated with the EuroGEOSS Broker, to implement CSW-Q and federate (either via distribution or harvesting schemes) quality-aware data sources, GeoViQua will constitute a valuable test-bed for advancing the current best practices and standards in geospatial quality representation and exploitation. The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7/2007-2013) under Grant Agreement n° 265178.

Barcode Technology Acceptance and Utilization in Health Information Management Department at Academic Hospitals According to Technology Acceptance Model

PubMed Central

Ehteshami, Asghar

2017-01-01

Nowdays, due to the increasing importance of quality care, organizations focuse on the improving provision, management and distribution of health. On one hand, incremental costs of the new technologies and on the other hand, increased knowledge of health care recipients and their expectations for high quality services have doubled the need to make changes in order to respond to resource constraints (financial, human, material). For this purpose, several technologies, such as barcode, have been used in hospitals to improve services and staff productivity; but various factors effect on the adoption of new technologies and despite good implementation of a technology and its benefits, sometimes personnel don’t accept and don’t use it. Methods: This is an applied descriptive cross-sectional study in which all the barcode users in health information management department of the three academic hospitals (Feiz, Al-Zahra, Ayatollah Kashani) affiliated to Isfahan University of Medical Sciences were surveyed by the barcode technology acceptance questionnaire, in six areas as following: barcode ease of learning, capabilities, perception of its usefulness and its ease of use, users attitudes towards its using, and users intention. Results: The finding showed that barcode technology total acceptance was relatively desirable (%76.9); the most compliance with TAM model was related to the user perceptions about the ease of use of barcode technology and the least compliance was related to the ease of learning barcode technology (respectively %83.7 and %71.5). Conclusion: Ease of learning and barcode capability effect of usefulness and perceived ease of barcode technology. Users perceptions effect their attitudes toward greater use of technology and their attitudes have an effect on their intention to use the technology and finally, their intention makes actual use of the technology (acceptance). Therefore, considering the six elements related to technology implementation can be important in the barcode acceptance; because their chained relationship is clearly visible. PMID:28484289

Barcode Technology Acceptance and Utilization in Health Information Management Department at Academic Hospitals According to Technology Acceptance Model.

PubMed

Ehteshami, Asghar

2017-03-01

Nowdays, due to the increasing importance of quality care, organizations focuse on the improving provision, management and distribution of health. On one hand, incremental costs of the new technologies and on the other hand, increased knowledge of health care recipients and their expectations for high quality services have doubled the need to make changes in order to respond to resource constraints (financial, human, material). For this purpose, several technologies, such as barcode, have been used in hospitals to improve services and staff productivity; but various factors effect on the adoption of new technologies and despite good implementation of a technology and its benefits, sometimes personnel don't accept and don't use it. This is an applied descriptive cross-sectional study in which all the barcode users in health information management department of the three academic hospitals (Feiz, Al-Zahra, Ayatollah Kashani) affiliated to Isfahan University of Medical Sciences were surveyed by the barcode technology acceptance questionnaire, in six areas as following: barcode ease of learning, capabilities, perception of its usefulness and its ease of use, users attitudes towards its using, and users intention. The finding showed that barcode technology total acceptance was relatively desirable (%76.9); the most compliance with TAM model was related to the user perceptions about the ease of use of barcode technology and the least compliance was related to the ease of learning barcode technology (respectively %83.7 and %71.5). Ease of learning and barcode capability effect of usefulness and perceived ease of barcode technology. Users perceptions effect their attitudes toward greater use of technology and their attitudes have an effect on their intention to use the technology and finally, their intention makes actual use of the technology (acceptance). Therefore, considering the six elements related to technology implementation can be important in the barcode acceptance; because their chained relationship is clearly visible.

Design and pilot evaluation of a system to develop computer-based site-specific practice guidelines from decision models.

PubMed

Sanders, G D; Nease, R F; Owens, D K

2000-01-01

Local tailoring of clinical practice guidelines (CPGs) requires experts in medicine and evidence synthesis unavailable in many practice settings. The authors' computer-based system enables developers and users to create, disseminate, and tailor CPGs, using normative decision models (DMs). ALCHEMIST, a web-based system, analyzes a DM, creates a CPG in the form of an annotated algorithm, and displays for the guideline user the optimal strategy. ALCHEMIST'S interface enables remote users to tailor the guideline by changing underlying input variables and observing the new annotated algorithm that is developed automatically. In a pilot evaluation of the system, a DM was used to evaluate strategies for staging non-small-cell lung cancer. Subjects (n = 15) compared the automatically created CPG with published guidelines for this staging and critiqued both using a previously developed instrument to rate the CPGs' usability, accountability, and accuracy on a scale of 0 (worst) to 2 (best), with higher scores reflecting higher quality. The mean overall score for the ALCHEMIST CPG was 1.502, compared with the published-CPG score of 0.987 (p = 0.002). The ALCHEMIST CPG scores for usability, accountability, and accuracy were 1.683, 1.393, and 1.430, respectively; the published CPG scores were 1.192, 0.941, and 0.830 (each comparison p < 0.05). On a scale of 1 (worst) to 5 (best), users' mean ratings of ALCHEMIST'S ease of use, usefulness of content, and presentation format were 4.76, 3.98, and 4.64, respectively. The results demonstrate the feasibility of a web-based system that automatically analyzes a DM and creates a CPG as an annotated algorithm, enabling remote users to develop site-specific CPGs. In the pilot evaluation, the ALCHEMIST guidelines met established criteria for quality and compared favorably with national CPGs. The high usability and usefulness ratings suggest that such systems can be a good tool for guideline development.

Prevalence and factors associated with a higher risk of neck and back pain among permanent wheelchair users: a cross-sectional study.

PubMed

Kovacs, Francisco M; Seco, Jesús; Royuela, Ana; Barriga, Andrés; Zamora, Javier

2018-04-01

Cross-sectional study. To determine the prevalence of, and factors associated with, spinal pain among wheelchair users. Four Spanish hospitals specialized in providing care for wheelchair users. Persons who had used a wheelchair for a median (IRQ) of 10 (5;19) years, 27% of them due to reasons other than spinal cord injury, were recruited consecutively (n = 750). Data on 43 demographic, psychosocial, ergonomic, and clinical variables were collected, and analyzed. Main outcome measures were: point prevalence of neck (NP), thoracic (TP), low back pain (LBP), and pain at any spinal level (PASL); and factors associated with them. Point prevalence was 56% for NP, 54% for TP, 45% for LBP, and 76% for PSAL. PASL was associated with a lower quality of life (OR (95% CI) 0.91 (0.86; 0.97)). Multivariable regression models showed that the main factors associated with significant pain (≥1.5 VAS points) were: (a) For NP: cervical spinal injury and wheelchair seat cushion thickness, (b) For TP: thoracic spinal injury and sagittal index, (c) For LBP: thoracic or lumbar spinal injury, with some sensitivity remaining, (d) For PASL: being female, living alone, and using a non-power wheelchair. Discrimination (AUC) of these models ranged between 0.638 and 0.818. p-values in the Hosmer-Lemeshow test ranged between 0.420 and 0.701. Prevalence of spinal pain among wheelchair users is high. It is associated with a lower quality of life. Future studies should assess whether using a power wheelchair affects PASL, and if the thickness of seat cushion affects NP. Spanish Back Pain Research Network.

Developing and Transitioning Numerical Air Quality Models to Improve Air Quality and Public Health Decision-Making in El Salvador and Costa Rica As Part of the Servir Applied Sciences Team

NASA Astrophysics Data System (ADS)

Thomas, A.; Huff, A. K.; Gomori, S. G.; Sadoff, N.

2014-12-01

In order to enhance the capacity for air quality modeling and improve air quality monitoring and management in the SERVIR Mesoamerica region, members of SERVIR's Applied Sciences Team (AST) are developing national numerical air quality models for El Salvador and Costa Rica. We are working with stakeholders from the El Salvador Ministry of the Environment and Natural Resources (MARN); National University of Costa Rica (UNA); the Costa Rica Ministry of the Environment, Energy, and Telecommunications (MINAET); and Costa Rica National Meteorological Institute (IMN), who are leaders in air quality monitoring and management in the Mesoamerica region. Focusing initially on these institutions will build sustainability in regional modeling activities by developing air quality modeling capability that can be shared with other countries in Mesoamerica. The air quality models are based on the Community Multi-scale Air Quality (CMAQ) model and incorporate meteorological inputs from the Weather Research and Forecasting (WRF) model, as well as national emissions inventories from El Salvador and Costa Rica. The models are being optimized for urban air quality, which is a priority of decision-makers in Mesoamerica. Once experimental versions of the modeling systems are complete, they will be transitioned to servers run by stakeholders in El Salvador and Costa Rica. The numerical air quality models will provide decision support for stakeholders to identify 1) high-priority areas for expanding national ambient air monitoring networks, 2) needed revisions to national air quality regulations, and 3) gaps in national emissions inventories. This project illustrates SERVIR's goal of the transition of science to support decision-making through capacity building in Mesoamerica, and it aligns with the Group on Earth Observations' health societal benefit theme. This presentation will describe technical aspects of the development of the models and outline key steps in our successful collaboration with the Mesoamerican stakeholders, including the processes of identifying and engaging decision-makers, understanding their requirements and limitations, communicating status updates on a regular basis, and providing sufficient training for end users to be able to utilize the models in a decision-making context.

Use of a design challenge to develop postural support devices for intermediate wheelchair users

PubMed Central

Tanuku, Deepti; Moller, Nathaniel C.

2017-01-01

The provision of an appropriate wheelchair, one that provides proper fit and postural support, promotes wheelchair users’ physical health and quality of life. Many wheelchair users have postural difficulties, requiring supplemental postural support devices for added trunk support. However, in many low- and middle-income settings, postural support devices are inaccessible, inappropriate or unaffordable. This article describes the use of the design challenge model, informed by a design thinking approach, to catalyse the development of an affordable, simple and robust postural support device for low- and middle-income countries. The article also illustrates how not-for-profit organisations can utilise design thinking and, in particular, the design challenge model to successfully support the development of innovative solutions to product or process challenges. PMID:28936418

An acceptance model for smart glasses based tourism augmented reality

NASA Astrophysics Data System (ADS)

Obeidy, Waqas Khalid; Arshad, Haslina; Huang, Jiung Yao

2017-10-01

Recent mobile technologies have revolutionized the way people experience their environment. Although, there is only limited research on users' acceptance of AR in the cultural tourism context, previous researchers have explored the opportunities of using augmented reality (AR) in order to enhance user experience. Recent AR research lack works that integrates dimensions which are specific to cultural tourism and smart glass specific context. Hence, this work proposes an AR acceptance model in the context of cultural heritage tourism and smart glasses capable of performing augmented reality. Therefore, in this paper we aim to present an AR acceptance model to understand the AR usage behavior and visiting intention for tourists who use Smart Glass based AR at UNESCO cultural heritage destinations in Malaysia. Furthermore, this paper identifies information quality, technology readiness, visual appeal, and facilitating conditions as external variables and key factors influencing visitors' beliefs, attitudes and usage intention.

End-user acceptance of a cloud-based teledentistry system and Android phone app for remote screening for oral diseases.

PubMed

Estai, Mohamed; Kanagasingam, Yogesan; Xiao, Di; Vignarajan, Janardhan; Bunt, Stuart; Kruger, Estie; Tennant, Marc

2017-01-01

Objective This study aimed to evaluate users' acceptance of a teledentistry model utilizing a smartphone camera used for dental caries screening and to identify a number of areas for improvement of the system. Methods A store-and-forward telemedicine platform "Remote-I" was developed to assist in the screening of oral diseases using an image acquisition Android app operated by 17 teledental assistants. A total of 485 images (five images per case) were directly transmitted from the Android app to the server. A panel of five dental practitioners (graders) assessed the images and reported their diagnosis. A user acceptance survey was sent to the graders and smartphone users following completion of the screening program. Results Of the 22 surveys sent out, 20 (91%) were completed. Generally, users showed optimism towards the use of the teledentistry system, and strongly positively assessed items on content and service quality. The majority of graders took less than 15 min to read the images while phone users took 5-10 min to complete the dental photography using the Android app. This study identified a number of factors that are essential for improving the current system, such as optimization of smartphone camera features, the format of the server, and the orientation of images and using oral retractors during photography. Conclusions Users appear to be generally satisfied with the proposed teledentistry model. However, they have specific concerns to address, many of which could be resolved through more effective training, coordination between sites and upgrading the current system.

A Music-Related Quality of Life Measure to Guide Music Rehabilitation for Adult Cochlear Implant Users.

PubMed

Dritsakis, Giorgos; van Besouw, Rachel M; Kitterick, Pádraig; Verschuur, Carl A

2017-09-18

A music-related quality of life (MuRQoL) questionnaire was developed for the evaluation of music rehabilitation for adult cochlear implant (CI) users. The present studies were aimed at refinement and validation. Twenty-four experts reviewed the MuRQoL items for face validity. A refined version was completed by 147 adult CI users, and psychometric techniques were used for item selection, assessment of reliability, and definition of the factor structure. The same participants completed the Short Form Health Survey for construct validation. MuRQoL responses from 68 CI users were compared with those of a matched group of adults with normal hearing. Eighteen items measuring music perception and engagement and 18 items measuring their importance were selected; they grouped together into 2 domains. The final questionnaire has high internal consistency and repeatability. Significant differences between CI users and adults with normal hearing and a correlation between music engagement and quality of life support construct validity. Scores of music perception and engagement and importance for the 18 items can be combined to assess the impact of music on the quality of life. The MuRQoL questionnaire is a reliable and valid measure of self-reported music perception, engagement, and their importance for adult CI users with potential to guide music aural rehabilitation.

Model-driven approach to data collection and reporting for quality improvement

PubMed Central

Curcin, Vasa; Woodcock, Thomas; Poots, Alan J.; Majeed, Azeem; Bell, Derek

2014-01-01

Continuous data collection and analysis have been shown essential to achieving improvement in healthcare. However, the data required for local improvement initiatives are often not readily available from hospital Electronic Health Record (EHR) systems or not routinely collected. Furthermore, improvement teams are often restricted in time and funding thus requiring inexpensive and rapid tools to support their work. Hence, the informatics challenge in healthcare local improvement initiatives consists of providing a mechanism for rapid modelling of the local domain by non-informatics experts, including performance metric definitions, and grounded in established improvement techniques. We investigate the feasibility of a model-driven software approach to address this challenge, whereby an improvement model designed by a team is used to automatically generate required electronic data collection instruments and reporting tools. To that goal, we have designed a generic Improvement Data Model (IDM) to capture the data items and quality measures relevant to the project, and constructed Web Improvement Support in Healthcare (WISH), a prototype tool that takes user-generated IDM models and creates a data schema, data collection web interfaces, and a set of live reports, based on Statistical Process Control (SPC) for use by improvement teams. The software has been successfully used in over 50 improvement projects, with more than 700 users. We present in detail the experiences of one of those initiatives, Chronic Obstructive Pulmonary Disease project in Northwest London hospitals. The specific challenges of improvement in healthcare are analysed and the benefits and limitations of the approach are discussed. PMID:24874182

Quality of care and the demand for health services in Bamako, Mali: the specific roles of structural, process, and outcome components.

PubMed

Mariko, Mamadou

2003-03-01

The public finance and foreign exchange crisis of the 1980s aggravated the unfavourable economic trends in many developing countries and resulted in budget cuts in the health sector. Policymakers, following the suggestions of World Bank experts, introduced user fees. Economic analysis of the demand for health care in these countries focused on the impact of price and income on health service utilisation. But the lesson to date from experiences in cost recovery is that without visible and fairly immediate improvements in the quality of care, the implementation of user fees will cause service utilisation to drop. For this reason, the role of quality of health care has been recently a subject of investigation in a number of health care demand studies. In spite of using the data from both households and facilities, recent studies are quite limited because they measure quality only by structural attributes (availability of drugs, equipment, number and qualifications of staff, and so on). Structural attributes of quality are necessary but not sufficient conditions for demand. A unique feature of this study is that it also considers the processes followed by practitioners and the outcome of care, to determine simultaneously the respective influence of price and quality on decision making. A nested multinomial logit was used to examine the choice between six alternatives (self-treatment, modern treatment at home, public hospital, public dispensary, for-profit facility and non-profit facility). The estimations are based on data from a statistically representative sample of 1104 patients from 1191 households and the data from a stratified random sample of 42 out of 84 facilities identified. The results indicate that omitting the process quality variables from the demand model produces a bias not only in the estimated coefficient of the "price" variable but also in coefficients of some structural attributes of the quality. The simulations suggest that price has a minor effect on utilisation of health services, and that health authorities can simultaneously double user fees and increase utilisation by emphasising improvement of both the structural and process quality of care in public health facilities.

Understanding User Resistance to Information Technology: Toward a Comprehensive Model in Health Information Technology

ERIC Educational Resources Information Center

Ngafeeson, Madison N.

2013-01-01

The successful implementation of health information systems is expected to increase legibility, reduce medical errors, boost the quality of healthcare and shrink costs. Yet, evidence points to the fact that healthcare professionals resist the full use of these systems. Physicians and nurses have been reported to resist the system. Even though…

User's guide for the northern hardwood stand models: SIMSAP and SIMTIM

Treesearch

Dale S. Solomon; Richard A. Hosmer; Richard A. Hosmer

1987-01-01

SIMSAP and SlMTlM are computer programs that have been developed to simulate the stand growth and development of natural and treated evenaged northern hardwood stands. SIMSAP begins with species distributions by quality classes in sapling stands after regeneration. SIMTIM, the poletimber-sawtimber-harvest phase, uses stocking guides based on quadratic mean stand...

Using the Technology Acceptance Model (TAM) to Conduct an Analysis of User Perceptions

ERIC Educational Resources Information Center

Young, Cheryl E.

2010-01-01

Contractor performance evaluation enables agents to make informed purchasing decisions, provide feedback to contractors/vendors, and help improve service quality and customer satisfaction. However, both public and private organizations sometimes fail to do so, as is the case at a division of a government organization located in a northeastern U.S.…

The Triangle Model for evaluating the effect of health information technology on healthcare quality and safety

PubMed Central

Kern, Lisa M; Abramson, Erika; Kaushal, Rainu

2011-01-01

With the proliferation of relatively mature health information technology (IT) systems with large numbers of users, it becomes increasingly important to evaluate the effect of these systems on the quality and safety of healthcare. Previous research on the effectiveness of health IT has had mixed results, which may be in part attributable to the evaluation frameworks used. The authors propose a model for evaluation, the Triangle Model, developed for designing studies of quality and safety outcomes of health IT. This model identifies structure-level predictors, including characteristics of: (1) the technology itself; (2) the provider using the technology; (3) the organizational setting; and (4) the patient population. In addition, the model outlines process predictors, including (1) usage of the technology, (2) organizational support for and customization of the technology, and (3) organizational policies and procedures about quality and safety. The Triangle Model specifies the variables to be measured, but is flexible enough to accommodate both qualitative and quantitative approaches to capturing them. The authors illustrate this model, which integrates perspectives from both health services research and biomedical informatics, with examples from evaluations of electronic prescribing, but it is also applicable to a variety of types of health IT systems. PMID:21857023

[Drug information for patients (Package Leaflets), and user testing in EU].

PubMed

Yamamoto, Michiko; Doi, Hirohisa; Furukawa, Aya

2015-01-01

Patients and consumers have desired high quality drug information in their pharmacotherapy, and are entitled to receive it. It is desirable that the information should be aimed at shared decision-making between patients and healthcare professionals about medications. The quality of drug information available to patients should also be assured. With an aim to improve the quality of "Drug Guide for Patients", we investigated Patient Information Leaflets (PILs) which are approved by the Medicines and Healthcare Products Regulatory Agency (MHRA) in the United Kingdom (UK) with regard to the criteria of development and user testing for assuring the quality of the PILs. In the European Union (EU), these are called Package Leaflets (PLs). PILs have been a legal requirement in the UK since 1999 for all medications. The user testing of PILs has been implemented as evidence since 2005 so that people can rely on the information provided in the leaflet. Execution of PILs which follow the guidance of the user testing, according to the guidance of this user testing, would reflect the views of patients. Here, we introduce the development process and implementation of user testing of PILs. In terms of readability, accessibility and understandability of drug information for patients, we need to discuss involving the public in decisions on how its quality should be assured and how it can be made easily be comprehensible for patients, in order to make effective use of "Drug Guide for Patients" in the future in Japan.

Modelling assistive technology adoption for people with dementia.

PubMed

Chaurasia, Priyanka; McClean, Sally I; Nugent, Chris D; Cleland, Ian; Zhang, Shuai; Donnelly, Mark P; Scotney, Bryan W; Sanders, Chelsea; Smith, Ken; Norton, Maria C; Tschanz, JoAnn

2016-10-01

Assistive technologies have been identified as a potential solution for the provision of elderly care. Such technologies have in general the capacity to enhance the quality of life and increase the level of independence among their users. Nevertheless, the acceptance of these technologies is crucial to their success. Generally speaking, the elderly are not well-disposed to technologies and have limited experience; these factors contribute towards limiting the widespread acceptance of technology. It is therefore important to evaluate the potential success of technologies prior to their deployment. The research described in this paper builds upon our previous work on modelling adoption of assistive technology, in the form of cognitive prosthetics such as reminder apps and aims at identifying a refined sub-set of features which offer improved accuracy in predicting technology adoption. Consequently, in this paper, an adoption model is built using a set of features extracted from a user's background to minimise the likelihood of non-adoption. The work is based on analysis of data from the Cache County Study on Memory and Aging (CCSMA) with 31 features covering a range of age, gender, education and details of health condition. In the process of modelling adoption, feature selection and feature reduction is carried out followed by identifying the best classification models. With the reduced set of labelled features the technology adoption model built achieved an average prediction accuracy of 92.48% when tested on 173 participants. We conclude that modelling user adoption from a range of parameters such as physical, environmental and social perspectives is beneficial in recommending a technology to a particular user based on their profile. Copyright © 2016 Elsevier Inc. All rights reserved.

Adjustment of regional regression models of urban-runoff quality using data for Chattanooga, Knoxville, and Nashville, Tennessee

USGS Publications Warehouse

Hoos, Anne B.; Patel, Anant R.

1996-01-01

Model-adjustment procedures were applied to the combined data bases of storm-runoff quality for Chattanooga, Knoxville, and Nashville, Tennessee, to improve predictive accuracy for storm-runoff quality for urban watersheds in these three cities and throughout Middle and East Tennessee. Data for 45 storms at 15 different sites (five sites in each city) constitute the data base. Comparison of observed values of storm-runoff load and event-mean concentration to the predicted values from the regional regression models for 10 constituents shows prediction errors, as large as 806,000 percent. Model-adjustment procedures, which combine the regional model predictions with local data, are applied to improve predictive accuracy. Standard error of estimate after model adjustment ranges from 67 to 322 percent. Calibration results may be biased due to sampling error in the Tennessee data base. The relatively large values of standard error of estimate for some of the constituent models, although representing significant reduction (at least 50 percent) in prediction error compared to estimation with unadjusted regional models, may be unacceptable for some applications. The user may wish to collect additional local data for these constituents and repeat the analysis, or calibrate an independent local regression model.

In-depth statistical analysis of the use of a website providing patients' narratives on lifestyle change when living with chronic back pain or coronary heart disease.

PubMed

Schweier, Rebecca; Grande, Gesine; Richter, Cynthia; Riedel-Heller, Steffi G; Romppel, Matthias

2018-07-01

To investigate the use of lebensstil-aendern.de ("lifestyle change"), a website providing peer narratives of experiences with successful lifestyle change, and to analyze whether peer model characteristics, clip content, and media type have an influence on the number of visitors, dwell time, and exit rates. An in-depth statistical analysis of website use with multilevel regression analyses. In two years, lebensstil-aendern.de attracted 12,844 visitors. The in-depth statistical analysis of usage rates demonstrated that audio clips were less popular than video or text-only clips, longer clips attracted more visitors, and clips by younger and female interviewees were preferred. User preferences for clip content categories differed between heart and back pain patients. Clips about stress management drew the smallest numbers of visitors in both indication modules. Patients are interested in the experiences of others. Because the quality of information for user-generated content is generally low, healthcare providers should include quality-assured patient narratives in their interventions. User preferences for content, medium, and peer characteristics need to be taken into account. If healthcare providers decide to include patient experiences in their websites, they should plan their intervention according to the different needs and preferences of users. Copyright © 2018 Elsevier B.V. All rights reserved.

Development, preliminary usability and accuracy testing of the EBMT 'eGVHD App' to support GvHD assessment according to NIH criteria-a proof of concept.

PubMed

Schoemans, H; Goris, K; Durm, R V; Vanhoof, J; Wolff, D; Greinix, H; Pavletic, S; Lee, S J; Maertens, J; Geest, S D; Dobbels, F; Duarte, R F

2016-08-01

The EBMT Complications and Quality of Life Working Party has developed a computer-based algorithm, the 'eGVHD App', using a user-centered design process. Accuracy was tested using a quasi-experimental crossover design with four expert-reviewed case vignettes in a convenience sample of 28 clinical professionals. Perceived usefulness was evaluated by the technology acceptance model (TAM) and User satisfaction by the Post-Study System Usability Questionnaire (PSSUQ). User experience was positive, with a median of 6 TAM points (interquartile range: 1) and beneficial median total, and subscale PSSUQ scores. The initial standard practice assessment of the vignettes yielded 65% correct results for diagnosis and 45% for scoring. The 'eGVHD App' significantly increased diagnostic and scoring accuracy to 93% (+28%) and 88% (+43%), respectively (both P<0.05). The same trend was observed in the repeated analysis of case 2: accuracy improved by using the App (+31% for diagnosis and +39% for scoring), whereas performance tended to decrease once the App was taken away. The 'eGVHD App' could dramatically improve the quality of care and research as it increased the performance of the whole user group by about 30% at the first assessment and showed a trend for improvement of individual performance on repeated case evaluation.

Evaluating User Participation and User Influence in an Enterprise System

ERIC Educational Resources Information Center

Gibbs, Martin D.

2010-01-01

Does user influence have an impact on the data quality of an information systems development project? What decision making should users have? How can users effectively be engaged in the process? What is success? User participation is considered to be a critical success factor for Enterprise Resource Planning (ERP) projects, yet there is little…

IsoMAP (Isoscape Modeling, Analysis, and Prediction)

NASA Astrophysics Data System (ADS)

Miller, C. C.; Bowen, G. J.; Zhang, T.; Zhao, L.; West, J. B.; Liu, Z.; Rapolu, N.

2009-12-01

IsoMAP is a TeraGrid-based web portal aimed at building the infrastructure that brings together distributed multi-scale and multi-format geospatial datasets to enable statistical analysis and modeling of environmental isotopes. A typical workflow enabled by the portal includes (1) data source exploration and selection, (2) statistical analysis and model development; (3) predictive simulation of isotope distributions using models developed in (1) and (2); (4) analysis and interpretation of simulated spatial isotope distributions (e.g., comparison with independent observations, pattern analysis). The gridded models and data products created by one user can be shared and reused among users within the portal, enabling collaboration and knowledge transfer. This infrastructure and the research it fosters can lead to fundamental changes in our knowledge of the water cycle and ecological and biogeochemical processes through analysis of network-based isotope data, but it will be important A) that those with whom the data and models are shared can be sure of the origin, quality, inputs, and processing history of these products, and B) the system is agile and intuitive enough to facilitate this sharing (rather than just ‘allow’ it). IsoMAP researchers are therefore building into the portal’s architecture several components meant to increase the amount of metadata about users’ products and to repurpose those metadata to make sharing and discovery more intuitive and robust to both expected, professional users as well as unforeseeable populations from other sectors.

Social justice, access and quality of healthcare in an age of austerity: users' perspective from rural Iceland.

PubMed

Gustafsdottir, Sonja S; Fenger, Kristjana; Halldorsdottir, Sigridur; Bjarnason, Thoroddur

2017-01-01

Iceland is sparsely populated but social justice and equity has been emphasised within healthcare. The aim of the study is to examine healthcare services in Fjallabyggð, in rural northern Iceland, from users' perspective and evaluate social justice, access and quality of healthcare in an age of austerity. Mixed-method approach with transformative design was used. First, data were collected with questionnaires (response rate of 53% [N=732] in 2009 and 30% [N=415] in 2012), and analysed statistically, followed by 10 interviews with healthcare users (2009 and 2014). The results were integrated and interpreted within Bronfenbrenner's Ecological Model. There was significantly less satisfaction with accessibility and variety of healthcare services in 2012 after services downsizing. Solid primary healthcare, good local elderly care, some freedom in healthcare choice and reliable emergency services were considered fundamental for life in a rural area. Equal access to healthcare is part of a fundamental human right. In times of economic downturn, people in rural areas, who are already vulnerable, may become even more vulnerable and disadvantaged, seriously threatening social justice and equity. With severe cutbacks in vitally important healthcare services people may eventually choose to self-migrate.

Automotive HMI design and participatory user involvement: review and perspectives.

PubMed

François, Mathilde; Osiurak, François; Fort, Alexandra; Crave, Philippe; Navarro, Jordan

2017-04-01

Automotive human-machine interface (HMI) design is facing new challenges due to the technological advances of the last decades. The design process has to be adapted in order to address human factors and road safety challenges. It is now widely accepted that user involvement in the HMI design process is valuable. However, the current form of user involvement in industry remains at the stages of concept assessment and usability tests. Moreover, the literature in other fields (e.g. information systems) promotes a broader user involvement with participatory design (i.e. the user is fully involved in the development process). This article reviews the established benefits of participatory design and reveals perspectives for automotive HMI quality improvement in a cognitive ergonomic framework. Practitioner Summary: Automotive HMI quality determines, in part, drivers' ability to perform primary driving tasks while using in-vehicle devices. User involvement in the design process is a key point to contribute to HMI quality. This article reports the potential benefits of a broad involvement from drivers to meet automotive HMI design challenges.

Access and Quality of Care in Direct-to-Consumer Telemedicine.

PubMed

Uscher-Pines, Lori; Mulcahy, Andrew; Cowling, David; Hunter, Gerald; Burns, Rachel; Mehrotra, Ateev

2016-04-01

Direct-to-consumer (DTC) telemedicine serves millions of patients; however, there is limited research on the care provided. This study compared the quality of care at Teladoc ( www.teladoc.com ), a large DTC telemedicine company, with that at physician offices and compared access to care for Teladoc users and nonusers. Claims from all enrollees 18-64 years of age in the California Public Employees' Retirement System health maintenance organization between April 2012 and October 2013 were analyzed. We compared the performance of Teladoc and physician offices on applicable Healthcare Effectiveness Data and Information Set measures. Using geographic information system analyses, we compared Teladoc users and nonusers with respect to rural location and available primary care physicians. Of enrollees offered Teladoc (n = 233,915), 3,043 adults had a total of 4,657 Teladoc visits. For the pharyngitis performance measure (ordering strep test), Teladoc performed worse than physician offices (3% versus 50%, p < 0.01). For the back pain measure (not ordering imaging), Teladoc and physician offices had similar performance (88% versus 79%, p = 0.20). For the bronchitis measure (not ordering antibiotics), Teladoc performed worse than physician offices (16.7 versus 27.9%, p < 0.01). In adjusted models, Teladoc users were not more likely to be located within a healthcare professional shortage area (odds ratio = 1.12, p = 0.10) or rural location (odds ratio = 1.0, p = 0.10). Teladoc providers were less likely to order diagnostic testing and had poorer performance on appropriate antibiotic prescribing for bronchitis. Teladoc users were not preferentially located in underserved communities. Short-term needs include ongoing monitoring of quality and additional marketing and education to increase telemedicine use among underserved patients.

Development of water environment information management and water pollution accident response system

NASA Astrophysics Data System (ADS)

Zhang, J.; Ruan, H.

2009-12-01

In recent years, many water pollution accidents occurred with the rapid economical development. In this study, water environment information management and water pollution accident response system are developed based on geographic information system (GIS) techniques. The system integrated spatial database, attribute database, hydraulic model, and water quality model under a user-friendly interface in a GIS environment. System ran in both Client/Server (C/S) and Browser/Server (B/S) platform which focused on model and inquiry respectively. System provided spatial and attribute data inquiry, water quality evaluation, statics, water pollution accident response case management (opening reservoir etc) and 2D and 3D visualization function, and gave assistant information to make decision on water pollution accident response. Polluted plume in Huaihe River were selected to simulate the transport of pollutes.

Spatial Data Quality Control Procedure applied to the Okavango Basin Information System

NASA Astrophysics Data System (ADS)

Butchart-Kuhlmann, Daniel

2014-05-01

Spatial data is a powerful form of information, capable of providing information of great interest and tremendous use to a variety of users. However, much like other data representing the 'real world', precision and accuracy must be high for the results of data analysis to be deemed reliable and thus applicable to real world projects and undertakings. The spatial data quality control (QC) procedure presented here was developed as the topic of a Master's thesis, in the sphere of and using data from the Okavango Basin Information System (OBIS), itself a part of The Future Okavango (TFO) project. The aim of the QC procedure was to form the basis of a method through which to determine the quality of spatial data relevant for application to hydrological, solute, and erosion transport modelling using the Jena Adaptable Modelling System (JAMS). As such, the quality of all data present in OBIS classified under the topics of elevation, geoscientific information, or inland waters, was evaluated. Since the initial data quality has been evaluated, efforts are underway to correct the errors found, thus improving the quality of the dataset.

JIGSAW-GEO (1.0): Locally Orthogonal Staggered Unstructured Grid Generation for General Circulation Modelling on the Sphere

NASA Technical Reports Server (NTRS)

Engwirda, Darren

2017-01-01

An algorithm for the generation of non-uniform, locally orthogonal staggered unstructured spheroidal grids is described. This technique is designed to generate very high-quality staggered VoronoiDelaunay meshes appropriate for general circulation modelling on the sphere, including applications to atmospheric simulation, ocean-modelling and numerical weather prediction. Using a recently developed Frontal-Delaunay refinement technique, a method for the construction of high-quality unstructured spheroidal Delaunay triangulations is introduced. A locally orthogonal polygonal grid, derived from the associated Voronoi diagram, is computed as the staggered dual. It is shown that use of the Frontal-Delaunay refinement technique allows for the generation of very high-quality unstructured triangulations, satisfying a priori bounds on element size and shape. Grid quality is further improved through the application of hill-climbing-type optimisation techniques. Overall, the algorithm is shown to produce grids with very high element quality and smooth grading characteristics, while imposing relatively low computational expense. A selection of uniform and non-uniform spheroidal grids appropriate for high-resolution, multi-scale general circulation modelling are presented. These grids are shown to satisfy the geometric constraints associated with contemporary unstructured C-grid-type finite-volume models, including the Model for Prediction Across Scales (MPAS-O). The use of user-defined mesh-spacing functions to generate smoothly graded, non-uniform grids for multi-resolution-type studies is discussed in detail.

JIGSAW-GEO (1.0): locally orthogonal staggered unstructured grid generation for general circulation modelling on the sphere

NASA Astrophysics Data System (ADS)

Engwirda, Darren

2017-06-01

An algorithm for the generation of non-uniform, locally orthogonal staggered unstructured spheroidal grids is described. This technique is designed to generate very high-quality staggered Voronoi-Delaunay meshes appropriate for general circulation modelling on the sphere, including applications to atmospheric simulation, ocean-modelling and numerical weather prediction. Using a recently developed Frontal-Delaunay refinement technique, a method for the construction of high-quality unstructured spheroidal Delaunay triangulations is introduced. A locally orthogonal polygonal grid, derived from the associated Voronoi diagram, is computed as the staggered dual. It is shown that use of the Frontal-Delaunay refinement technique allows for the generation of very high-quality unstructured triangulations, satisfying a priori bounds on element size and shape. Grid quality is further improved through the application of hill-climbing-type optimisation techniques. Overall, the algorithm is shown to produce grids with very high element quality and smooth grading characteristics, while imposing relatively low computational expense. A selection of uniform and non-uniform spheroidal grids appropriate for high-resolution, multi-scale general circulation modelling are presented. These grids are shown to satisfy the geometric constraints associated with contemporary unstructured C-grid-type finite-volume models, including the Model for Prediction Across Scales (MPAS-O). The use of user-defined mesh-spacing functions to generate smoothly graded, non-uniform grids for multi-resolution-type studies is discussed in detail.

Sources of practice knowledge among Australian fitness trainers.

PubMed

Bennie, Jason A; Wiesner, Glen H; van Uffelen, Jannique G Z; Harvey, Jack T; Biddle, Stuart J H

2017-12-01

Few studies have examined the sources of practice knowledge fitness trainers use to inform their training methods and update knowledge. This study aims to describe sources of practice knowledge among Australian fitness trainers. In July 2014, 9100 Australian fitness trainers were invited to complete an online survey. Respondents reported the frequency of use of eight sources of practice knowledge (e.g. fitness magazines, academic texts). In a separate survey, exercise science experts (n = 27) ranked each source as either (1) 'high-quality' or (2) 'low-quality'. Proportions of users of 'high-quality' sources were calculated across demographic (age, sex) and fitness industry-related characteristics (qualification, setting, role). A multivariate logistic regression analysis assessed the odds of being classified as a user of high-quality sources, adjusting for demographic and fitness industry-related factors. Out of 1185 fitness trainers (response rate = 13.0%), aged 17-72 years, 47.6% (95% CI, 44.7-50.4%) were classified as frequent users of high-quality sources of practice knowledge. In the adjusted analysis, compared to trainers aged 17-26 years, those aged ≥61 years (OR, 2.15; 95% CI, 1.05-4.38) and 40-50 years (OR, 1.54; 95% CI, 1.02-2.31) were more likely to be classified as a user of high-quality sources. When compared to trainers working in large centres, those working in outdoor settings (OR, 1.81; 95% CI, 1.23-2.65) and medium centres (OR, 1.59; 95% CI, 1.12-2.29) were more likely to be classified as users of high-quality sources. Our findings suggest that efforts should be made to improve the quality of knowledge acquisition among Australian fitness trainers.

Soft qualities in healthcare. Method and tools for soft qualities design in hospitals' built environments.

PubMed

Capolongo, S; Bellini, E; Nachiero, D; Rebecchi, A; Buffoli, M

2014-01-01

The design of hospital environments is determined by functional requirements and technical regulations, as well as numerous protocols, which define the structure and system characteristics that such environments need to achieve. In order to improve people's well-being and the quality of their experience within public hospitals, design elements (soft qualities) are added to those 'necessary' features. The aim of this research has been to experiment a new design process and also to create health care spaces with high environmental quality and capable to meet users' emotional and perceptual needs. Such needs were investigated with the help of qualitative research tools and the design criteria for one of these soft qualities - colour - were subsequently defined on the basis of the findings. The colour scheme design for the new San Paolo Hospital Emergency Department in Milan was used as case study. Focus groups were fundamental in defining the project's goals and criteria. The issues raised have led to believe that the proper procedure is not the mere consultation of the users in order to define the goals: users should rather be involved in the whole design process and become co-agents of the choices that determine the environment characteristics, so as to meet the quality requirements identified by the users themselves. The case study has shown the possibility of developing a designing methodology made by three steps (or operational tools) in which users' groups are involved in the choices, loading to plan the environments where compliance with expectations is already implied and verified by means of the process itself. Thus, the method leads to the creation of soft qualities in Healthcare.

The effect of image sharpness on quantitative eye movement data and on image quality evaluation while viewing natural images

NASA Astrophysics Data System (ADS)

Vuori, Tero; Olkkonen, Maria

2006-01-01

The aim of the study is to test both customer image quality rating (subjective image quality) and physical measurement of user behavior (eye movements tracking) to find customer satisfaction differences in imaging technologies. Methodological aim is to find out whether eye movements could be quantitatively used in image quality preference studies. In general, we want to map objective or physically measurable image quality to subjective evaluations and eye movement data. We conducted a series of image quality tests, in which the test subjects evaluated image quality while we recorded their eye movements. Results show that eye movement parameters consistently change according to the instructions given to the user, and according to physical image quality, e.g. saccade duration increased with increasing blur. Results indicate that eye movement tracking could be used to differentiate image quality evaluation strategies that the users have. Results also show that eye movements would help mapping between technological and subjective image quality. Furthermore, these results give some empirical emphasis to top-down perception processes in image quality perception and evaluation by showing differences between perceptual processes in situations when cognitive task varies.

QuakeSim 2.0

NASA Technical Reports Server (NTRS)

Donnellan, Andrea; Parker, Jay W.; Lyzenga, Gregory A.; Granat, Robert A.; Norton, Charles D.; Rundle, John B.; Pierce, Marlon E.; Fox, Geoffrey C.; McLeod, Dennis; Ludwig, Lisa Grant

2012-01-01

QuakeSim 2.0 improves understanding of earthquake processes by providing modeling tools and integrating model applications and various heterogeneous data sources within a Web services environment. QuakeSim is a multisource, synergistic, data-intensive environment for modeling the behavior of earthquake faults individually, and as part of complex interacting systems. Remotely sensed geodetic data products may be explored, compared with faults and landscape features, mined by pattern analysis applications, and integrated with models and pattern analysis applications in a rich Web-based and visualization environment. Integration of heterogeneous data products with pattern informatics tools enables efficient development of models. Federated database components and visualization tools allow rapid exploration of large datasets, while pattern informatics enables identification of subtle, but important, features in large data sets. QuakeSim is valuable for earthquake investigations and modeling in its current state, and also serves as a prototype and nucleus for broader systems under development. The framework provides access to physics-based simulation tools that model the earthquake cycle and related crustal deformation. Spaceborne GPS and Inter ferometric Synthetic Aperture (InSAR) data provide information on near-term crustal deformation, while paleoseismic geologic data provide longerterm information on earthquake fault processes. These data sources are integrated into QuakeSim's QuakeTables database system, and are accessible by users or various model applications. UAVSAR repeat pass interferometry data products are added to the QuakeTables database, and are available through a browseable map interface or Representational State Transfer (REST) interfaces. Model applications can retrieve data from Quake Tables, or from third-party GPS velocity data services; alternatively, users can manually input parameters into the models. Pattern analysis of GPS and seismicity data has proved useful for mid-term forecasting of earthquakes, and for detecting subtle changes in crustal deformation. The GPS time series analysis has also proved useful as a data-quality tool, enabling the discovery of station anomalies and data processing and distribution errors. Improved visualization tools enable more efficient data exploration and understanding. Tools provide flexibility to science users for exploring data in new ways through download links, but also facilitate standard, intuitive, and routine uses for science users and end users such as emergency responders.

Synonym-Based Word Frequency Analysis to Support the Development and Presentation of a Public Health Quality Improvement Taxonomy.

PubMed

Pina, Jamie; Massoudi, Barbara L; Chester, Kelley; Koyanagi, Mark

2018-06-07

Researchers and analysts have not completely examined word frequency analysis as an approach to creating a public health quality improvement taxonomy. To develop a taxonomy of public health quality improvement concepts for an online exchange of quality improvement work. We analyzed documents, conducted an expert review, and employed a user-centered design along with a faceted search approach to make online entries searchable for users. To provide the most targeted facets to users, we used word frequency to analyze 334 published public health quality improvement documents to find the most common clusters of word meanings. We then reviewed the highest-weighted concepts and categorized their relationships to quality improvement details in our taxonomy. Next, we mapped meanings to items in our taxonomy and presented them in order of their weighted percentages in the data. Using these methods, we developed and sorted concepts in the faceted search presentation so that online exchange users could access relevant search criteria. We reviewed 50 of the top synonym clusters and identified 12 categories for our taxonomy data. The final categories were as follows: Summary; Planning and Execution Details; Health Impact; Training and Preparation; Information About the Community; Information About the Health Department; Results; Quality Improvement (QI) Staff; Information; Accreditation Details; Collaborations; and Contact Information of the Submitter. Feedback about the elements in the taxonomy and presentation of elements in our search environment from users has been positive. When relevant data are available, the word frequency analysis method may be useful in other taxonomy development efforts for public health.

Chamber QoE: a multi-instrumental approach to explore affective aspects in relation to quality of experience

NASA Astrophysics Data System (ADS)

De Moor, Katrien; Mazza, Filippo; Hupont, Isabelle; Ríos Quintero, Miguel; Mäki, Toni; Varela, Martín.

2014-02-01

Evaluating (audio)visual quality and Quality of Experience (QoE) from the user's perspective, has become a key element in optimizing users' experiences and their quality. Traditionally, the focus lies on how multi-level quality features are perceived by a human user. The interest has however gradually expanded towards human cognitive, affective and behavioral processes that may impact on, be an element of, or be influenced by QoE, and which have been underinvestigated so far. In addition, there is a major discrepancy between the new, broadly supported and more holistic conceptualization of QoE proposed by Le Callet et al. (2012) and traditional, standardized QoE assessment. This paper explores ways to tackle this discrepancy by means of a multi-instrumental approach. More concretely, it presents results from a lab study on video quality (N=27), aimed at going beyond the dominant QoE assessment paradigm and at exploring affective aspects in relation to QoE and in relation to perceived overall quality. Four types of data were collected: `traditional' QoE self-report measures were complemented with `alternative', emotional state- and user engagement-related self-report measures to evaluate QoE. In addition, we collected EEG (physiological) data, gazetracking data and facial expressions (behavioral) data. The video samples used in test were longer in duration than is common in standard tests allowing us to study e.g. more realistic experience and deeper user engagement. Our findings support the claim that the traditional QoE measures need to be reconsidered and extended with additional, affective staterelated measures.

An HTML5-Based Pure Website Solution for Rapidly Viewing and Processing Large-Scale 3D Medical Volume Reconstruction on Mobile Internet

PubMed Central

Chen, Xin; Zhang, Ye; Zhang, Jingna; Li, Ying; Mo, Xuemei; Chen, Wei

2017-01-01

This study aimed to propose a pure web-based solution to serve users to access large-scale 3D medical volume anywhere with good user experience and complete details. A novel solution of the Master-Slave interaction mode was proposed, which absorbed advantages of remote volume rendering and surface rendering. On server side, we designed a message-responding mechanism to listen to interactive requests from clients (Slave model) and to guide Master volume rendering. On client side, we used HTML5 to normalize user-interactive behaviors on Slave model and enhance the accuracy of behavior request and user-friendly experience. The results showed that more than four independent tasks (each with a data size of 249.4 MB) could be simultaneously carried out with a 100-KBps client bandwidth (extreme test); the first loading time was <12 s, and the response time of each behavior request for final high quality image remained at approximately 1 s, while the peak value of bandwidth was <50-KBps. Meanwhile, the FPS value for each client was ≥40. This solution could serve the users by rapidly accessing the application via one URL hyperlink without special software and hardware requirement in a diversified network environment and could be easily integrated into other telemedical systems seamlessly. PMID:28638406

An HTML5-Based Pure Website Solution for Rapidly Viewing and Processing Large-Scale 3D Medical Volume Reconstruction on Mobile Internet.

PubMed

Qiao, Liang; Chen, Xin; Zhang, Ye; Zhang, Jingna; Wu, Yi; Li, Ying; Mo, Xuemei; Chen, Wei; Xie, Bing; Qiu, Mingguo

2017-01-01

This study aimed to propose a pure web-based solution to serve users to access large-scale 3D medical volume anywhere with good user experience and complete details. A novel solution of the Master-Slave interaction mode was proposed, which absorbed advantages of remote volume rendering and surface rendering. On server side, we designed a message-responding mechanism to listen to interactive requests from clients ( Slave model) and to guide Master volume rendering. On client side, we used HTML5 to normalize user-interactive behaviors on Slave model and enhance the accuracy of behavior request and user-friendly experience. The results showed that more than four independent tasks (each with a data size of 249.4 MB) could be simultaneously carried out with a 100-KBps client bandwidth (extreme test); the first loading time was <12 s, and the response time of each behavior request for final high quality image remained at approximately 1 s, while the peak value of bandwidth was <50-KBps. Meanwhile, the FPS value for each client was ≥40. This solution could serve the users by rapidly accessing the application via one URL hyperlink without special software and hardware requirement in a diversified network environment and could be easily integrated into other telemedical systems seamlessly.

Facilitators and barriers to quality of care in maternal, newborn and child health: a global situational analysis through metareview.

PubMed

Nair, Manisha; Yoshida, Sachiyo; Lambrechts, Thierry; Boschi-Pinto, Cynthia; Bose, Krishna; Mason, Elizabeth Mary; Mathai, Matthews

2014-05-22

Conduct a global situational analysis to identify the current facilitators and barriers to improving quality of care (QoC) for pregnant women, newborns and children. Metareview of published and unpublished systematic reviews and meta-analyses conducted between January 2000 and March 2013 in any language. Assessment of Multiple Systematic Reviews (AMSTAR) is used to assess the methodological quality of systematic reviews. Health systems of all countries. Study outcome: QoC measured using surrogate indicators--effective, efficient, accessible, acceptable/patient centred, equitable and safe. Conducted in two phases (1) qualitative synthesis of extracted data to identify and group the facilitators and barriers to improving QoC, for each of the three population groups, into the six domains of WHO's framework and explore new domains and (2) an analysis grid to map the common facilitators and barriers. We included 98 systematic reviews with 110 interventions to improve QoC from countries globally. The facilitators and barriers identified fitted the six domains of WHO's framework--information, patient-population engagement, leadership, regulations and standards, organisational capacity and models of care. Two new domains, 'communication' and 'satisfaction', were generated. Facilitators included active and regular interpersonal communication between users and providers; respect, confidentiality, comfort and support during care provision; engaging users in decision-making; continuity of care and effective audit and feedback mechanisms. Key barriers identified were language barriers in information and communication; power difference between users and providers; health systems not accounting for user satisfaction; variable standards of implementation of standard guidelines; shortage of resources in health facilities and lack of studies assessing the role of leadership in improving QoC. These were common across the three population groups. The barriers to good-quality healthcare are common for pregnant women, newborns and children; thus, interventions targeted to address them will have uniform beneficial effects. Adopting the identified facilitators would help countries strengthen their health systems and ensure high-quality care for all. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Facilitators and barriers to quality of care in maternal, newborn and child health: a global situational analysis through metareview

PubMed Central

Nair, Manisha; Yoshida, Sachiyo; Lambrechts, Thierry; Boschi-Pinto, Cynthia; Bose, Krishna; Mason, Elizabeth Mary; Mathai, Matthews

2014-01-01

Objective Conduct a global situational analysis to identify the current facilitators and barriers to improving quality of care (QoC) for pregnant women, newborns and children. Study design Metareview of published and unpublished systematic reviews and meta-analyses conducted between January 2000 and March 2013 in any language. Assessment of Multiple Systematic Reviews (AMSTAR) is used to assess the methodological quality of systematic reviews. Settings Health systems of all countries. Study outcome: QoC measured using surrogate indicators––effective, efficient, accessible, acceptable/patient centred, equitable and safe. Analysis Conducted in two phases (1) qualitative synthesis of extracted data to identify and group the facilitators and barriers to improving QoC, for each of the three population groups, into the six domains of WHO's framework and explore new domains and (2) an analysis grid to map the common facilitators and barriers. Results We included 98 systematic reviews with 110 interventions to improve QoC from countries globally. The facilitators and barriers identified fitted the six domains of WHO's framework––information, patient–population engagement, leadership, regulations and standards, organisational capacity and models of care. Two new domains, ‘communication’ and ‘satisfaction’, were generated. Facilitators included active and regular interpersonal communication between users and providers; respect, confidentiality, comfort and support during care provision; engaging users in decision-making; continuity of care and effective audit and feedback mechanisms. Key barriers identified were language barriers in information and communication; power difference between users and providers; health systems not accounting for user satisfaction; variable standards of implementation of standard guidelines; shortage of resources in health facilities and lack of studies assessing the role of leadership in improving QoC. These were common across the three population groups. Conclusions The barriers to good-quality healthcare are common for pregnant women, newborns and children; thus, interventions targeted to address them will have uniform beneficial effects. Adopting the identified facilitators would help countries strengthen their health systems and ensure high-quality care for all. PMID:24852300

SWATShare- A Platform for Collaborative Hydrology Research and Education with Cyber-enabled Sharing, Running and Visualization of SWAT Models

NASA Astrophysics Data System (ADS)

Rajib, M. A.; Merwade, V.; Song, C.; Zhao, L.; Kim, I. L.; Zhe, S.

2014-12-01

Setting up of any hydrologic model requires a large amount of efforts including compilation of all the data, creation of input files, calibration and validation. Given the amount of efforts involved, it is possible that models for a watershed get created multiple times by multiple groups or organizations to accomplish different research, educational or policy goals. To reduce the duplication of efforts and enable collaboration among different groups or organizations around an already existing hydrology model, a platform is needed where anyone can search for existing models, perform simple scenario analysis and visualize model results. The creator and users of a model on such a platform can then collaborate to accomplish new research or educational objectives. From this perspective, a prototype cyber-infrastructure (CI), called SWATShare, is developed for sharing, running and visualizing Soil Water Assessment Tool (SWAT) models in an interactive GIS-enabled web environment. Users can utilize SWATShare to publish or upload their own models, search and download existing SWAT models developed by others, run simulations including calibration using high performance resources provided by XSEDE and Cloud. Besides running and sharing, SWATShare hosts a novel spatio-temporal visualization system for SWAT model outputs. In temporal scale, the system creates time-series plots for all the hydrology and water quality variables available along the reach as well as in watershed-level. In spatial scale, the system can dynamically generate sub-basin level thematic maps for any variable at any user-defined date or date range; and thereby, allowing users to run animations or download the data for subsequent analyses. In addition to research, SWATShare can also be used within a classroom setting as an educational tool for modeling and comparing the hydrologic processes under different geographic and climatic settings. SWATShare is publicly available at https://www.water-hub.org/swatshare.

A Collaborative Location Based Travel Recommendation System through Enhanced Rating Prediction for the Group of Users.

PubMed

Ravi, Logesh; Vairavasundaram, Subramaniyaswamy

2016-01-01

Rapid growth of web and its applications has created a colossal importance for recommender systems. Being applied in various domains, recommender systems were designed to generate suggestions such as items or services based on user interests. Basically, recommender systems experience many issues which reflects dwindled effectiveness. Integrating powerful data management techniques to recommender systems can address such issues and the recommendations quality can be increased significantly. Recent research on recommender systems reveals an idea of utilizing social network data to enhance traditional recommender system with better prediction and improved accuracy. This paper expresses views on social network data based recommender systems by considering usage of various recommendation algorithms, functionalities of systems, different types of interfaces, filtering techniques, and artificial intelligence techniques. After examining the depths of objectives, methodologies, and data sources of the existing models, the paper helps anyone interested in the development of travel recommendation systems and facilitates future research direction. We have also proposed a location recommendation system based on social pertinent trust walker (SPTW) and compared the results with the existing baseline random walk models. Later, we have enhanced the SPTW model for group of users recommendations. The results obtained from the experiments have been presented.

ESIP Information Quality Cluster (IQC)

NASA Technical Reports Server (NTRS)

Ramapriyan, H. K.; Peng, Ge; Moroni, David F.

2016-01-01

The Information Quality Cluster (IQC) within the Federation of Earth Science Information Partners (ESIP) was initially formed in 2011 and has evolved significantly over time. The current objectives of the IQC are to: 1. Actively evaluate community data quality best practices and standards; 2. Improve capture, description, discovery, and usability of information about data quality in Earth science data products; 3. Ensure producers of data products are aware of standards and best practices for conveying data quality, and data providers distributors intermediaries establish, improve and evolve mechanisms to assist users in discovering and understanding data quality information; and 4. Consistently provide guidance to data managers and stewards on how best to implement data quality standards and best practices to ensure and improve maturity of their data products. The activities of the IQC include: 1. Identification of additional needs for consistently capturing, describing, and conveying quality information through use case studies with broad and diverse applications; 2. Establishing and providing community-wide guidance on roles and responsibilities of key players and stakeholders including users and management; 3. Prototyping of conveying quality information to users in a more consistent, transparent, and digestible manner; 4. Establishing a baseline of standards and best practices for data quality; 5. Evaluating recommendations from NASA's DQWG in a broader context and proposing possible implementations; and 6. Engaging data providers, data managers, and data user communities as resources to improve our standards and best practices. Following the principles of openness of the ESIP Federation, IQC invites all individuals interested in improving capture, description, discovery, and usability of information about data quality in Earth science data products to participate in its activities.

Measuring the post-adoption customer perception of mobile banking services.

PubMed

Yu, Tai-Kuei; Fang, Kwoting

2009-02-01

With liberalization and internalization in the financial market and progress in information technology, banks face dual competitive pressures to provide service quality and administrative efficiency. That these recent developments are fueled by technology might misleadingly suggest that the adoption of mobile banking is largely based on technological criteria. The purpose of this study is to establish a better measurement model for postadoption user perception of mobile banking services. Based on 458 valid responses of mobile banking users, the results show that the instrument, consisting of 21 items and 6 factors, is a reliable, valid, and useful measurement for assessing the postadoption perception of mobile banking.

Dispatchable Renewable Energy Model for Microgrid Power System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chiou, Fred; Gentle, Jake P.; McJunkin, Timothy R.

2017-04-01

Over the years, many research projects have been performed and focused on finding out the effective ways to balance the power demands and supply on the utility grid. The causes of the imbalance could be the increasing demands from the end users, the loss of power generation (generators down), faults on the transmission lines, power tripped due to overload, and weather conditions, etc. An efficient Load Frequency Control (LFC) can assure the desired electricity quality provided to the residential, commercial and industrial end users. A simulation model is built in this project to investigate the contribution of the modeling ofmore » dispatchable energy such as solar energy, wind power, hydro power and energy storage to the balance of the microgrid power system. An analysis of simplified feedback control system with proportional, integral, and derivative (PID) controller was performed. The purpose of this research is to investigate a simulation model that achieves certain degree of the resilient control for the microgrid.« less

Cultural competence in mental health care: a review of model evaluations

PubMed Central

Bhui, Kamaldeep; Warfa, Nasir; Edonya, Patricia; McKenzie, Kwame; Bhugra, Dinesh

2007-01-01

Background Cultural competency is now a core requirement for mental health professionals working with culturally diverse patient groups. Cultural competency training may improve the quality of mental health care for ethnic groups. Methods A systematic review that included evaluated models of professional education or service delivery. Results Of 109 potential papers, only 9 included an evaluation of the model to improve the cultural competency practice and service delivery. All 9 studies were located in North America. Cultural competency included modification of clinical practice and organizational performance. Few studies published their teaching and learning methods. Only three studies used quantitative outcomes. One of these showed a change in attitudes and skills of staff following training. The cultural consultation model showed evidence of significant satisfaction by clinicians using the service. No studies investigated service user experiences and outcomes. Conclusion There is limited evidence on the effectiveness of cultural competency training and service delivery. Further work is required to evaluate improvement in service users' experiences and outcomes. PMID:17266765

Middle Rio Grande Water Sustainability in Extreme Drought: Using Provenance to Trace Modeling Scenarios Selected by Users

NASA Astrophysics Data System (ADS)

Pennington, D. D.; Garnica Chavira, L.; Villanueva-Rosales, N.

2017-12-01

People living in the vicinity of the middle Rio Grande from Elephant Butte Reservoir in New Mexico through Fort Quitman, Texas, including inhabitants on the Mexican side of the river, are confronted with numerous challenges that include drought, population growth, reduced surface water quality and quantity, declining aquifers, and expected future increases in temperature with more variable precipitation. The transboundary surface water is subject to complex regulation across two U.S. states and two nations (U.S. and Mexico). This presentation will summarize the modeling efforts of a USDA-funded project to characterize potential future solutions for water sustainability while managing agriculture, economic, and human impacts. It will present an online software system designed for rapid, flexible modeling of different climate, policy, and technology scenarios with stakeholders, and the underlying intelligent system that manages model selection, data and parameters, and user choices, and provides a provenance trace based on the W3C PROV standard.

Portable water quality monitoring system

NASA Astrophysics Data System (ADS)

Nizar, N. B.; Ong, N. R.; Aziz, M. H. A.; Alcain, J. B.; Haimi, W. M. W. N.; Sauli, Z.

2017-09-01

Portable water quality monitoring system was a developed system that tested varied samples of water by using different sensors and provided the specific readings to the user via short message service (SMS) based on the conditions of the water itself. In this water quality monitoring system, the processing part was based on a microcontroller instead of Lead and Copper Rule (LCR) machines to receive the results. By using four main sensors, this system obtained the readings based on the detection of the sensors, respectively. Therefore, users can receive the readings through SMS because there was a connection between Arduino Uno and GSM Module. This system was designed to be portable so that it would be convenient for users to carry it anywhere and everywhere they wanted to since the processor used is smaller in size compared to the LCR machines. It was also developed to ease the user to monitor and control the water quality. However, the ranges of the sensors' detection still a limitation in this study.

Quality, management, and the interplay of self-assessment, process assessments, and performance-based observations

NASA Astrophysics Data System (ADS)

Willett, D. J.

1993-04-01

In this document, the author presents his observations on the topic of quality assurance (QA). Traditionally the focus of quality management has been on QA organizations, manuals, procedures, audits, and assessments; quality was measured by the degree of conformance to specifications or standards. Today quality is defined as satisfying user needs and is measured by user satisfaction. The author proposes that quality is the responsibility of line organizations and staff and not the responsibility of the QA group. This work outlines an effective Conduct of Operations program. The author concludes his observations with a discussion of how quality is analogous to leadership.

Delivering Service Quality in Alcohol Treatment: A Qualitative Comparison of Public and Private Treatment Centres by Service Users and Service Providers

ERIC Educational Resources Information Center

Resnick, Sheilagh M.; Griffiths, Mark D.

2012-01-01

In the UK, quality of care has now been placed at the centre of the National Health Service (NHS) modernisation programme. To date, there has been little research on the service quality delivery of alcohol treatment services from the perspective of both the service user and service provider. Therefore, this qualitative study explored the…

Agile Model Driven Development of Electronic Health Record-Based Specialty Population Registries.

PubMed

Kannan, Vaishnavi; Fish, Jason C; Willett, DuWayne L

2016-02-01

The transformation of the American healthcare payment system from fee-for-service to value-based care increasingly makes it valuable to develop patient registries for specialized populations, to better assess healthcare quality and costs. Recent widespread adoption of Electronic Health Records (EHRs) in the U.S. now makes possible construction of EHR-based specialty registry data collection tools and reports, previously unfeasible using manual chart abstraction. But the complexities of specialty registry EHR tools and measures, along with the variety of stakeholders involved, can result in misunderstood requirements and frequent product change requests, as users first experience the tools in their actual clinical workflows. Such requirements churn could easily stall progress in specialty registry rollout. Modeling a system's requirements and solution design can be a powerful way to remove ambiguities, facilitate shared understanding, and help evolve a design to meet newly-discovered needs. "Agile Modeling" retains these values while avoiding excessive unused up-front modeling in favor of iterative incremental modeling. Using Agile Modeling principles and practices, in calendar year 2015 one institution developed 58 EHR-based specialty registries, with 111 new data collection tools, supporting 134 clinical process and outcome measures, and enrolling over 16,000 patients. The subset of UML and non-UML models found most consistently useful in designing, building, and iteratively evolving EHR-based specialty registries included User Stories, Domain Models, Use Case Diagrams, Decision Trees, Graphical User Interface Storyboards, Use Case text descriptions, and Solution Class Diagrams.

Prediction of Turbulence-Generated Noise in Unheated Jets. Part 2; JeNo Users' Manual (Version 1.0)

NASA Technical Reports Server (NTRS)

Khavaran, Abbas; Wolter, John D.; Koch, L. Danielle

2009-01-01

JeNo (Version 1.0) is a Fortran90 computer code that calculates the far-field sound spectral density produced by axisymmetric, unheated jets at a user specified observer location and frequency range. The user must provide a structured computational grid and a mean flow solution from a Reynolds-Averaged Navier Stokes (RANS) code as input. Turbulence kinetic energy and its dissipation rate from a k-epsilon or k-omega turbulence model must also be provided. JeNo is a research code, and as such, its development is ongoing. The goal is to create a code that is able to accurately compute far-field sound pressure levels for jets at all observer angles and all operating conditions. In order to achieve this goal, current theories must be combined with the best practices in numerical modeling, all of which must be validated by experiment. Since the acoustic predictions from JeNo are based on the mean flow solutions from a RANS code, quality predictions depend on accurate aerodynamic input.This is why acoustic source modeling, turbulence modeling, together with the development of advanced measurement systems are the leading areas of research in jet noise research at NASA Glenn Research Center.

The Virtuous Circles of Clinical Information Systems: a Modern Utopia.

PubMed

Degoulet, P

2016-11-10

Clinical information systems (CIS) are developed with the aim of improving both the efficiency and the quality of care. This position paper is based on the hypothesis that such vision is partly a utopian view of the emerging eSociety. Examples are drawn from 15 years of experience with the fully integrated Georges Pompidou University Hospital (HEGP) CIS and temporal data series extracted from the data warehouses of Assistance Publique - Hôpitaux de Paris (AP-HP) acute care hospitals which share the same administrative organization as HEGP. Three main virtuous circles are considered: user satisfaction vs. system use, system use vs. cost efficiency, and system use vs quality of care. In structural equation models (SEM), the positive bidirectional relationship between user satisfaction and use was only observed in the early HEGP CIS deployment phase (first four years) but disappeared in late post-adoption (≥8 years). From 2009 to 2013, financial efficiency of 20 AP-HP hospitals evaluated with stochastic frontier analysis (SFA) models diminished by 0.5% per year. The lower decrease of efficiency observed between the three hospitals equipped with a more mature CIS and the 17 other hospitals was of the same order of magnitude than the difference observed between pediatric and non-pediatric hospitals. Outcome quality benefits that would bring evidence to the system use vs. quality loop are unlikely to be obtained in a near future since they require integration with population-based outcome measures including mortality, morbidity, and quality of life that may not be easily available. Barriers to making the transformation of the utopian part of the CIS virtuous circles happen should be overcome to actually benefit the emerging eSociety.

Integrating Patient-Reported Outcomes into Spine Surgical Care through Visual Dashboards: Lessons Learned from Human-Centered Design.

PubMed

Hartzler, Andrea L; Chaudhuri, Shomir; Fey, Brett C; Flum, David R; Lavallee, Danielle

2015-01-01

The collection of patient-reported outcomes (PROs) draws attention to issues of importance to patients-physical function and quality of life. The integration of PRO data into clinical decisions and discussions with patients requires thoughtful design of user-friendly interfaces that consider user experience and present data in personalized ways to enhance patient care. Whereas most prior work on PROs focuses on capturing data from patients, little research details how to design effective user interfaces that facilitate use of this data in clinical practice. We share lessons learned from engaging health care professionals to inform design of visual dashboards, an emerging type of health information technology (HIT). We employed human-centered design (HCD) methods to create visual displays of PROs to support patient care and quality improvement. HCD aims to optimize the design of interactive systems through iterative input from representative users who are likely to use the system in the future. Through three major steps, we engaged health care professionals in targeted, iterative design activities to inform the development of a PRO Dashboard that visually displays patient-reported pain and disability outcomes following spine surgery. Design activities to engage health care administrators, providers, and staff guided our work from design concept to specifications for dashboard implementation. Stakeholder feedback from these health care professionals shaped user interface design features, including predefined overviews that illustrate at-a-glance trends and quarterly snapshots, granular data filters that enable users to dive into detailed PRO analytics, and user-defined views to share and reuse. Feedback also revealed important considerations for quality indicators and privacy-preserving sharing and use of PROs. Our work illustrates a range of engagement methods guided by human-centered principles and design recommendations for optimizing PRO Dashboards for patient care and quality improvement. Engaging health care professionals as stakeholders is a critical step toward the design of user-friendly HIT that is accepted, usable, and has the potential to enhance quality of care and patient outcomes.

A novel smartphone ophthalmic imaging adapter: User feasibility studies in Hyderabad, India

PubMed Central

Ludwig, Cassie A; Murthy, Somasheila I; Pappuru, Rajeev R; Jais, Alexandre; Myung, David J; Chang, Robert T

2016-01-01

Aim of Study: To evaluate the ability of ancillary health staff to use a novel smartphone imaging adapter system (EyeGo, now known as Paxos Scope) to capture images of sufficient quality to exclude emergent eye findings. Secondary aims were to assess user and patient experiences during image acquisition, interuser reproducibility, and subjective image quality. Materials and Methods: The system captures images using a macro lens and an indirect ophthalmoscopy lens coupled with an iPhone 5S. We conducted a prospective cohort study of 229 consecutive patients presenting to L. V. Prasad Eye Institute, Hyderabad, India. Primary outcome measure was mean photographic quality (FOTO-ED study 1–5 scale, 5 best). 210 patients and eight users completed surveys assessing comfort and ease of use. For 46 patients, two users imaged the same patient's eyes sequentially. For 182 patients, photos taken with the EyeGo system were compared to images taken by existing clinic cameras: a BX 900 slit-lamp with a Canon EOS 40D Digital Camera and an FF 450 plus Fundus Camera with VISUPAC™ Digital Imaging System. Images were graded post hoc by a reviewer blinded to diagnosis. Results: Nine users acquired 719 useable images and 253 videos of 229 patients. Mean image quality was ≥ 4.0/5.0 (able to exclude subtle findings) for all users. 8/8 users and 189/210 patients surveyed were comfortable with the EyeGo device on a 5-point Likert scale. For 21 patients imaged with the anterior adapter by two users, a weighted κ of 0.597 (95% confidence interval: 0.389–0.806) indicated moderate reproducibility. High level of agreement between EyeGo and existing clinic cameras (92.6% anterior, 84.4% posterior) was found. Conclusion: The novel, ophthalmic imaging system is easily learned by ancillary eye care providers, well tolerated by patients, and captures high-quality images of eye findings. PMID:27146928

Primary care quality: community health center and health maintenance organization.

PubMed

Shi, Leiyu; Starfield, Barbara; Xu, Jiahong; Politzer, Robert; Regan, Jerrilyn

2003-08-01

This study compares the primary health care quality of community health centers (CHCs) and health maintenance organizations (HMOs) in South Carolina to elucidate the quality of CHC performance relative to mainstream settings such as the HMO. Mail surveys were used to obtain data from 350 randomly selected HMO users. Surveys with follow-up interviews were conducted to obtain data from 540 randomly selected CHC users. A validated adult primary care assessment tool was used in both surveys. Multivariate analyses were performed to assess the association of health care setting (HMO versus CHC) with primary care quality while controlling for sociodemographic and health care characteristics. After controlling for sociodemographic and health care use measures, CHC patients demonstrated higher scores in several primary care domains (ongoing care, coordination of service, comprehensiveness, and community orientation) as well as total primary care performance. Users of CHC are more likely than HMO users to rate their primary health care provider as good, except in the area of ease of first contact. The positive rating of the CHC is particularly impressive after taking into account that many CHC users have characteristics associated with poorer ratings of care.

Avatars and virtual agents – relationship interfaces for the elderly

PubMed Central

2017-01-01

In the Digital Era, the authors witness a change in the relationship between the patient and the care-giver or Health Maintenance Organization's providing the health services. Another fact is the use of various technologies to increase the effectiveness and quality of health services across all primary and secondary users. These technologies range from telemedicine systems, decision making tools, online and self-services applications and virtual agents; all providing information and assistance. The common thread between all these digital implementations, is they all require human machine interfaces. These interfaces must be interactive, user friendly and inviting, to create user involvement and cooperation incentives. The challenge is to design interfaces which will best fit the target users and enable smooth interaction especially, for the elderly users. Avatars and Virtual Agents are one of the interfaces used for both home care monitoring and companionship. They are also inherently multimodal in nature and allow an intimate relation between the elderly users and the Avatar. This study discusses the need and nature of these relationship models, the challenges of designing for the elderly. The study proposes key features for the design and evaluation in the area of assistive applications using Avatar and Virtual agents for the elderly users. PMID:28706725

Development of critical dimension measurement scanning electron microscope for ULSI (S-8000 series)

NASA Astrophysics Data System (ADS)

Ezumi, Makoto; Otaka, Tadashi; Mori, Hiroyoshi; Todokoro, Hideo; Ose, Yoichi

1996-05-01

The semiconductor industry is moving from half-micron to quarter-micron design rules. To support this evolution, Hitachi has developed a new critical dimension measurement scanning electron microscope (CD-SEM), the model S-8800 series, for quality control of quarter- micron process lines. The new CD-SEM provides detailed examination of process conditions with 5 nm resolution and 5 nm repeatability (3 sigma) at accelerating voltage 800 V using secondary electron imaging. In addition, a newly developed load-lock system has a capability of achieving a high sample throughput of 20 wafers/hour (5 point measurements per wafer) under continuous operation. To support user friendliness, the system incorporates a graphical user interface (GUI), an automated pattern recognition system which helps locating measurement points, both manual and semi-automated operation, and user-programmable operating parameters.

Desiderata for product labeling of medical expert systems.

PubMed

Geissbühler, A; Miller, R A

1997-12-01

The proliferation and increasing complexity of medical expert systems raise ethical and legal concerns about the ability of practitioners to protect their patients from defective or misused software. Appropriate product labeling of expert systems can help clinical users to understand software indications and limitations. Mechanisms of action and knowledge representation schema should be explained in layperson's terminology. User qualifications and resources available for acquiring the skills necessary to understand and critique the system output should be listed. The processes used for building and maintaining the system's knowledge base are key determinants of the product's quality, and should be carefully documented. To meet these desiderata, a printed label is insufficient. The authors suggest a new, more active, model of product labeling for medical expert systems that involves embedding 'knowledge of the knowledge base', creating user-specific data, and sharing global information using the Internet.

"Neither we are satisfied nor they"-users and provider's perspective: a qualitative study of maternity care in secondary level public health facilities, Uttar Pradesh, India.

PubMed

Bhattacharyya, Sanghita; Issac, Anns; Rajbangshi, Preety; Srivastava, Aradhana; Avan, Bilal I

2015-09-27

Quality of care provided during childbirth is a critical determinant of preventing maternal mortality and morbidity. In the studies available, quality has been assessed either from the users' perspective or the providers'. The current study tries to bring both perspectives together to identify common key focus areas for quality improvement. This study aims to assess the users' (recently delivered women) and care providers' perceptions of care to understand the common challenges affecting provision of quality maternity care in public health facilities in India. A qualitative design comprising of in-depth interviews of 24 recently delivered women from secondary care facilities and 16 health care providers in Uttar Pradesh, India. The data were analysed thematically to assess users' and providers' perspectives on the common themes. The common challenges experienced regarding provision of care were inadequate physical infrastructure, irregular supply of water, electricity, shortage of medicines, supplies, and gynaecologist and anaesthetist to manage complications, difficulty in maintaining privacy and lack of skill for post-delivery counselling. However, physical access, cleanliness, interpersonal behaviour, information sharing and out-of-pocket expenditure were concerns for only users. Similarly, providers raised poor management of referral cases, shortage of staff, non-functioning of blood bank, lack of incentives for work as their concerns. The study identified the common themes of care from both the perspectives, which have been foundrelevant in terms of challenges identified in many developing countries including India. The study framework identified new themes like management of emergencies in complicated cases, privacy and cost of care which both the group felt is relevant in the context of providing quality care during childbirth in low resource setting. The key challenges identified by both the groups can be prioritized, when developing quality improvement program in the health facilities. The identified components of care can match the supply with the demand for care and make the services truly responsive to user needs. The study highlights infrastructure, human resources, supplies and medicine as priority areas of quality improvement in the facility as perceived by both users and providers, nevertheless the interpersonal aspect of care primarily reported by the users must also not be ignored.

Experiencing mental health diagnosis: a systematic review of service user, clinician, and carer perspectives across clinical settings.

PubMed

Perkins, Amorette; Ridler, Joseph; Browes, Daniel; Peryer, Guy; Notley, Caitlin; Hackmann, Corinna

2018-04-18

Receiving a mental health diagnosis can be pivotal for service users, and it has been described in both positive and negative terms. What influences service-user experience of the diagnostic process is unclear; consequently, clinicians report uncertainty regarding best practice. This Review aims to understand and inform diagnostic practice through a comprehensive synthesis of qualitative data on views and experiences from key stakeholders (service users, clinicians, carers, and family). We searched five databases and identified 78 papers for inclusion, originating from 13 countries and including 2228 participants. Eligible papers were assessed for quality, and data were coded and then developed into themes, which generated a model representing factors to consider for clinicians conveying, and individuals receiving, mental health diagnoses. Themes included disclosure, information provision, collaboration, timing, stigma, and functional value of diagnosis for recovery. Variations between different stakeholders and clinical contexts are explored. Findings support an individualised, collaborative, and holistic approach to mental health diagnosis. Copyright © 2018 Elsevier Ltd. All rights reserved.

Assessing product image quality for online shopping

NASA Astrophysics Data System (ADS)

Goswami, Anjan; Chung, Sung H.; Chittar, Naren; Islam, Atiq

2012-01-01

Assessing product-image quality is important in the context of online shopping. A high quality image that conveys more information about a product can boost the buyer's confidence and can get more attention. However, the notion of image quality for product-images is not the same as that in other domains. The perception of quality of product-images depends not only on various photographic quality features but also on various high level features such as clarity of the foreground or goodness of the background etc. In this paper, we define a notion of product-image quality based on various such features. We conduct a crowd-sourced experiment to collect user judgments on thousands of eBay's images. We formulate a multi-class classification problem for modeling image quality by classifying images into good, fair and poor quality based on the guided perceptual notions from the judges. We also conduct experiments with regression using average crowd-sourced human judgments as target. We compute a pseudo-regression score with expected average of predicted classes and also compute a score from the regression technique. We design many experiments with various sampling and voting schemes with crowd-sourced data and construct various experimental image quality models. Most of our models have reasonable accuracies (greater or equal to 70%) on test data set. We observe that our computed image quality score has a high (0.66) rank correlation with average votes from the crowd sourced human judgments.

Nurses' perception of the quality of care they provide to hospitalized drug addicts: testing the theory of reasoned action.

PubMed

Natan, Merav Ben; Beyil, Valery; Neta, Okev

2009-12-01

A correlational design was used to examine nursing staff attitudes and subjective norms manifested in intended and actual care of drug users based on the Theory of Reasoned Action. One hundred and thirty-five nursing staff from three central Israeli hospitals completed a questionnaire examining theory-based variables as well as sociodemographic and professional characteristics. Most respondents reported a high to very high level of actual or intended care of drug users. Nurses' stronger intentions to provide quality care to drug users were associated with more positive attitudes. Nursing staff members had moderately negative attitudes towards drug users. Nurses were found to hold negative stereotypes of drug addict patients and most considered the management of this group difficult. Positive attitudes towards drug users, perceived expectations of others and perceived correctness of the behaviour are important in their effect on the intention of nurses to provide high-quality care to hospitalized patients addicted to drugs.

Profiles of the evaluators: impact of psychographic variables on the consumer-oriented quality assessment of mobile television

NASA Astrophysics Data System (ADS)

Jumisko-Pyykkö, Satu; Häkkinen, Jukka

2008-02-01

In the product development of services it is important to adjust mobile video quality according to the quality requirements of potential users. Therefore, a careful participant selection is very important. However, in the literature the details of participant selection are often handled without great detail. This is also reflected in the handling of experimental results, where the impact of psychographic factors on quality is rarely reported. As the user attributes potentially have a large effect to the results, we investigated the role of various psychographical variables on the subjective evaluation of audiovisual video quality in two different experiments. The studied variables were age, gender, education, professionalism, television consumption, experiences of different digital video qualities, and attitude towards technology. The results showed that quality evaluations were affected by almost all background factors. The most significant variables were age, professionalism, knowledge of digital quality features and attitude towards technology. The knowledge of these factors can be exploited in careful participant selection, which will in turn increase the validity of results as the subjective evaluations reflect better the requirements of potential users.

Overall satisfaction of health care users with the quality of and access to health care services: a cross-sectional study in six Central and Eastern European countries.

PubMed

Stepurko, Tetiana; Pavlova, Milena; Groot, Wim

2016-08-02

The measurement of consumer satisfaction is an essential part of the assessment of health care services in terms of service quality and health care system responsiveness. Studies across Europe have described various strategies health care users employ to secure services with good quality and quick access. In Central and Eastern European countries, such strategies also include informal payments to health care providers. This paper analyzes the satisfaction of health care users with the quality of and access to health care services. The study focuses on six Central and Eastern European countries (Bulgaria, Hungary, Lithuania, Poland, Romania and Ukraine). We use data on past experience with health care use collected in 2010 through uniform national surveys in these countries. Based on these data, we carry out a multi-country analysis to investigate factors associated with the satisfaction of health care users in the six countries. The results indicate that about 10-14 % of the service users are not satisfied with the quality of, or access to health care services they used in the preceding year. However, significant differences across countries and services are observed, e.g. the highest level of dissatisfaction with access to outpatient services (16.4 %) is observed among patients in Lithuania, while in Poland, the level of dissatisfaction with quality of outpatient and inpatient services are much lower than dissatisfaction with access. The study also analyses the association of users' satisfaction with factors such as making informal payments, inability to pay and relative importance of service attributes stated by the service users. These multi-country findings provide evidence for health policy making in the Central and Eastern European countries. Although the average rates of satisfactions per country are relatively high, the results suggest that there is ample room for improvements. Specifically, many service-users still report dissatisfaction especially those who pay informally and those unable to pay. The high shares of informal payments and inability of users to deal with the health expenditures lead to doubts about the fairness of the health care provision in Central and Eastern Europe. There is an urgent need for policy makers in the region to not only acknowledge but also to effectively address this key problem.

Success rate evaluation of clinical governance implementation in teaching hospitals in Kerman (Iran) based on nine steps of Karsh's model.

PubMed

Vali, Leila; Mastaneh, Zahra; Mouseli, Ali; Kardanmoghadam, Vida; Kamali, Sodabeh

2017-07-01

One of the ways to improve the quality of services in the health system is through clinical governance. This method aims to create a framework for clinical services providers to be accountable in return for continuing improvement of quality and maintaining standards of services. To evaluate the success rate of clinical governance implementation in Kerman teaching hospitals based on 9 steps of Karsh's Model. This cross-sectional study was conducted in 2015 on 94 people including chief executive officers (CEOs), nursing managers, clinical governance managers and experts, head nurses and nurses. The required data were collected through a researcher-made questionnaire containing 38 questions with three-point Likert Scale (good, moderate, and weak). The Karsh's Model consists of nine steps including top management commitment to change, accountability for change, creating a structured approach for change, training, pilot implementation, communication, feedback, simulation, and end-user participation. Data analysis using descriptive statistics and Mann-Whitney-Wilcoxon test was done by SPSS software version 16. About 81.9 % of respondents were female and 74.5 have a Bachelor of Nursing (BN) degree. In general, the status of clinical governance implementation in studied hospitals based on 9 steps of the model was 44 % (moderate). A significant relationship was observed among accountability and organizational position (p=0.0012) and field of study (p=0.000). Also, there were significant relationships between structure-based approach and organizational position (p=0.007), communication and demographic characteristics (p=0.000), and end-user participation with organizational position (p=0.03). Clinical governance should be implemented by correct needs assessment and participation of all stakeholders, to ensure its enforcement in practice, and to enhance the quality of services.

Modelling of Sediment Transport of the Mehadica River, Caras Severin County, Romania

NASA Astrophysics Data System (ADS)

Grozav, Adia; Beilicci, Robert; Beilicci, Erika

2017-10-01

Study case is situated in Caras-Severin County. Every sediment transport model application is different both in terms of time and space scale, study objectives, required accuracy, allocated resources, background of the study team etc. For sediment transport modelling, it is necessary to know the characteristics of the sediment in the river bed. Therefore, it is recommended to collect a number of bed sediment grap samples. These samples should be analysing in terms of grain size distribution. To solve theoretical problems of movement of water in the river Mehadica, it requires modelling of water flow in this case. Numerical modelling was performed using the program MIKE11. MIKE 11 is a user-friendly, fully dynamic, one-dimensional modelling tool for the detailed analysis, design, management and operation of both simple and complex river and channel systems. With its exceptional flexibility, speed and user friendly environment, MIKE 11 provides a complete and effective design environment for engineering, water resources, water quality management and planning applications. The Hydrodynamic (HD) module is the nucleus of the MIKE 11 modelling system and forms the basis for most modules including Flood Forecasting, Advection- Dispersion, Water Quality and Non-cohesive sediment transport modules. The MIKE 11 HD module solves the vertically integrated equations for the conservation of mass and momentum, i.e. the Saint-Venant equations. The input data are: area plan with location of cross sections; cross sections topographical data and roughness of river bed; flood discharge hydrograph. Advanced computational modules are included for description of flow over hydraulic structures, including possibilities to describe structure operation.

Building and evaluating sensor-based Citizens' Observatories for improving quality of life in cities

NASA Astrophysics Data System (ADS)

Castell, Nuria; Lahoz, William; Schneider, Philipp; Høiskar, Britt Ann; Grossberndt, Sonja; Naderer, Clemens; Robinson, Johanna; Kocman, David; Horvat, Milena; Bartonova, Alena

2014-05-01

Urban air quality, the environmental quality of public spaces and indoor areas such as schools, are areas of great concern to citizens and policymakers. However, access to information addressing these areas is not always available in a user-friendly manner. In particular, the quality and quantity of this information is not consistent across these areas, and does not reflect differences in needs among users. The EU-funded CITI-SENSE project will build on the concept of the Citizens' Observatories to empower citizens to contribute to and participate in environmental governance, and enable them to support and influence decision making by policymakers. To achieve this goal, CITI-SENSE will develop, test, demonstrate and validate a community-based environmental monitoring and information system using low-cost sensors and Earth Observation applications. Key to achieving this goal is the chain "sensors-platforms-products-users" linking providers of technology to users: (i) technologies for distributed monitoring (sensors); (ii) information and communication technologies (platform); (iii) information products and services (products); (iv) and citizen involvement in both monitoring and societal decisions (users). The CITI-SENSE observatories cover three empowerment initiatives: urban air quality; public spaces; and school indoor quality. The empowerment initiatives are being performed at nine locations across Europe. Each location has adapted the generic case study to their local circumstances and has contacted the urban stakeholders needed to run the study. The empowerment initiatives are divided into two phases: a first phase (Pilot Study), and a second phase (Full Implementation). The main goal of the Pilot Study is to test and evaluate the chain "sensors-platform-products-users". To assess the results of the empowerment initiatives, key performance indicators (KPIs) are being developed; these include questionnaires for users. The KPIs will be used to design the full implementation phase of the project. First results from the Pilot Study will be presented for three participating cities: Ljubljana (Slovenia), Vienna (Austria) and Oslo (Norway), which differ in size, environmental conditions and social perception on local air quality. Ljubljana and Oslo empowerment initiatives include urban air quality, and school indoor air quality, while Vienna only includes urban air quality. For the area of urban air quality, the three cities will deploy a wireless network of five static sensor nodes and distribute five personal sensors among people to be carried while performing daily activities in the pilot study. The data will be accessible to users through mobile phones, web services and other devices. For the full implementation phase the sensor network will comprise a total of 20 to 40 static nodes, depending on the size of the city, and 20 personal nodes. For the school indoor air quality three sensors will be allocated inside the school and one outside. The data will be visible provided in school classrooms giving the students a unique and innovative approach to learn about air quality by being involved. Acknowledgements: CITI-SENSE is a Collaborative Project partly funded by the EU FP7-ENV-2012 under grant agreement no 308524. www.citi-sense.eu.

Evaluation of a Quality Improvement Resource for Public Health Practitioners

PubMed Central

Marcial, Laura H.; Brown, Stephen; Throop, Cynthia; Pina, Jamie

2017-01-01

Objectives: Quality improvement is a critical mechanism to manage public health agency performance and to strengthen accountability for public funds. The objective of this study was to evaluate a relatively new quality improvement resource, the Public Health Quality Improvement Exchange (PHQIX), a free online communication platform dedicated to making public health quality improvement information accessible to practitioners. Methods: We conducted an internet-based survey of registered PHQIX users (n = 536 respondents) in 2013 and key informant interviews with PHQIX frequent users (n = 21) in 2014, in the United States. We assessed use of the PHQIX website, user engagement and satisfaction, communication and knowledge exchange, use of information, and impact on quality improvement capacity and accreditation readiness. Results: Of 462 respondents, 369 (79.9%) browsed quality improvement initiatives, making it the most commonly used site feature, and respondents described PHQIX as a near-unique source for real-world quality improvement examples. Respondents were satisfied with the quality and breadth of topics and relevance to their settings (average satisfaction scores, 3.9-4.1 [where 5 was the most satisfied]). Of 407 respondents, 237 (58.2%) said that they had put into practice information learned on PHQIX, and 209 of 405 (51.6%) said that PHQIX had helped to improve quality improvement capacity. Fewer than half of respondents used the commenting function, the Community Forum, and the Ask an Expert feature. Conclusions: Findings suggest that PHQIX, particularly descriptions of the quality improvement initiatives, is a valued resource for public health practitioners. Users reported sharing information with colleagues and applying what they learned to their own work. These findings may relate to other efforts to disseminate quality improvement knowledge. PMID:28135430

Evaluation of a Quality Improvement Resource for Public Health Practitioners.

PubMed

Porterfield, Deborah S; Marcial, Laura H; Brown, Stephen; Throop, Cynthia; Pina, Jamie

Quality improvement is a critical mechanism to manage public health agency performance and to strengthen accountability for public funds. The objective of this study was to evaluate a relatively new quality improvement resource, the Public Health Quality Improvement Exchange (PHQIX), a free online communication platform dedicated to making public health quality improvement information accessible to practitioners. We conducted an internet-based survey of registered PHQIX users (n = 536 respondents) in 2013 and key informant interviews with PHQIX frequent users (n = 21) in 2014, in the United States. We assessed use of the PHQIX website, user engagement and satisfaction, communication and knowledge exchange, use of information, and impact on quality improvement capacity and accreditation readiness. Of 462 respondents, 369 (79.9%) browsed quality improvement initiatives, making it the most commonly used site feature, and respondents described PHQIX as a near-unique source for real-world quality improvement examples. Respondents were satisfied with the quality and breadth of topics and relevance to their settings (average satisfaction scores, 3.9-4.1 [where 5 was the most satisfied]). Of 407 respondents, 237 (58.2%) said that they had put into practice information learned on PHQIX, and 209 of 405 (51.6%) said that PHQIX had helped to improve quality improvement capacity. Fewer than half of respondents used the commenting function, the Community Forum, and the Ask an Expert feature. Findings suggest that PHQIX, particularly descriptions of the quality improvement initiatives, is a valued resource for public health practitioners. Users reported sharing information with colleagues and applying what they learned to their own work. These findings may relate to other efforts to disseminate quality improvement knowledge.

Standards for the Analysis and Processing of Surface-Water Data and Information Using Electronic Methods

USGS Publications Warehouse

Sauer, Vernon B.

2002-01-01

Surface-water computation methods and procedures are described in this report to provide standards from which a completely automated electronic processing system can be developed. To the greatest extent possible, the traditional U. S. Geological Survey (USGS) methodology and standards for streamflow data collection and analysis have been incorporated into these standards. Although USGS methodology and standards are the basis for this report, the report is applicable to other organizations doing similar work. The proposed electronic processing system allows field measurement data, including data stored on automatic field recording devices and data recorded by the field hydrographer (a person who collects streamflow and other surface-water data) in electronic field notebooks, to be input easily and automatically. A user of the electronic processing system easily can monitor the incoming data and verify and edit the data, if necessary. Input of the computational procedures, rating curves, shift requirements, and other special methods are interactive processes between the user and the electronic processing system, with much of this processing being automatic. Special computation procedures are provided for complex stations such as velocity-index, slope, control structures, and unsteady-flow models, such as the Branch-Network Dynamic Flow Model (BRANCH). Navigation paths are designed to lead the user through the computational steps for each type of gaging station (stage-only, stagedischarge, velocity-index, slope, rate-of-change in stage, reservoir, tide, structure, and hydraulic model stations). The proposed electronic processing system emphasizes the use of interactive graphics to provide good visual tools for unit values editing, rating curve and shift analysis, hydrograph comparisons, data-estimation procedures, data review, and other needs. Documentation, review, finalization, and publication of records are provided for with the electronic processing system, as well as archiving, quality assurance, and quality control.

Online Teaching Evaluation for Higher Quality Education: Strategies to Increase University Students' Participation

ERIC Educational Resources Information Center

Weng, Cathy; Weng, Apollo; Tsai, Kevin

2014-01-01

The primary purpose of this study was to uncover determines of students' intention to adopt online teaching evaluation at the end of semester by proposing a research model based on the Theory of Planned Behavior (TPB). The second purpose was to investigate the efficacy of the theory for predicting such intention. Besides users' attitude and…

Formulation of consumables management models. Development approach for the mission planning processor working model

NASA Technical Reports Server (NTRS)

Connelly, L. C.

1977-01-01

The mission planning processor is a user oriented tool for consumables management and is part of the total consumables subsystem management concept. The approach to be used in developing a working model of the mission planning processor is documented. The approach includes top-down design, structured programming techniques, and application of NASA approved software development standards. This development approach: (1) promotes cost effective software development, (2) enhances the quality and reliability of the working model, (3) encourages the sharing of the working model through a standard approach, and (4) promotes portability of the working model to other computer systems.

Agile Model Driven Development of Electronic Health Record-Based Specialty Population Registries

PubMed Central

Kannan, Vaishnavi; Fish, Jason C.; Willett, DuWayne L.

2018-01-01

The transformation of the American healthcare payment system from fee-for-service to value-based care increasingly makes it valuable to develop patient registries for specialized populations, to better assess healthcare quality and costs. Recent widespread adoption of Electronic Health Records (EHRs) in the U.S. now makes possible construction of EHR-based specialty registry data collection tools and reports, previously unfeasible using manual chart abstraction. But the complexities of specialty registry EHR tools and measures, along with the variety of stakeholders involved, can result in misunderstood requirements and frequent product change requests, as users first experience the tools in their actual clinical workflows. Such requirements churn could easily stall progress in specialty registry rollout. Modeling a system’s requirements and solution design can be a powerful way to remove ambiguities, facilitate shared understanding, and help evolve a design to meet newly-discovered needs. “Agile Modeling” retains these values while avoiding excessive unused up-front modeling in favor of iterative incremental modeling. Using Agile Modeling principles and practices, in calendar year 2015 one institution developed 58 EHR-based specialty registries, with 111 new data collection tools, supporting 134 clinical process and outcome measures, and enrolling over 16,000 patients. The subset of UML and non-UML models found most consistently useful in designing, building, and iteratively evolving EHR-based specialty registries included User Stories, Domain Models, Use Case Diagrams, Decision Trees, Graphical User Interface Storyboards, Use Case text descriptions, and Solution Class Diagrams. PMID:29750222

SUGAR: graphical user interface-based data refiner for high-throughput DNA sequencing.

PubMed

Sato, Yukuto; Kojima, Kaname; Nariai, Naoki; Yamaguchi-Kabata, Yumi; Kawai, Yosuke; Takahashi, Mamoru; Mimori, Takahiro; Nagasaki, Masao

2014-08-08

Next-generation sequencers (NGSs) have become one of the main tools for current biology. To obtain useful insights from the NGS data, it is essential to control low-quality portions of the data affected by technical errors such as air bubbles in sequencing fluidics. We develop a software SUGAR (subtile-based GUI-assisted refiner) which can handle ultra-high-throughput data with user-friendly graphical user interface (GUI) and interactive analysis capability. The SUGAR generates high-resolution quality heatmaps of the flowcell, enabling users to find possible signals of technical errors during the sequencing. The sequencing data generated from the error-affected regions of a flowcell can be selectively removed by automated analysis or GUI-assisted operations implemented in the SUGAR. The automated data-cleaning function based on sequence read quality (Phred) scores was applied to a public whole human genome sequencing data and we proved the overall mapping quality was improved. The detailed data evaluation and cleaning enabled by SUGAR would reduce technical problems in sequence read mapping, improving subsequent variant analysis that require high-quality sequence data and mapping results. Therefore, the software will be especially useful to control the quality of variant calls to the low population cells, e.g., cancers, in a sample with technical errors of sequencing procedures.

McGurk stimuli for the investigation of multisensory integration in cochlear implant users: The Oldenburg Audio Visual Speech Stimuli (OLAVS).

PubMed

Stropahl, Maren; Schellhardt, Sebastian; Debener, Stefan

2017-06-01

The concurrent presentation of different auditory and visual syllables may result in the perception of a third syllable, reflecting an illusory fusion of visual and auditory information. This well-known McGurk effect is frequently used for the study of audio-visual integration. Recently, it was shown that the McGurk effect is strongly stimulus-dependent, which complicates comparisons across perceivers and inferences across studies. To overcome this limitation, we developed the freely available Oldenburg audio-visual speech stimuli (OLAVS), consisting of 8 different talkers and 12 different syllable combinations. The quality of the OLAVS set was evaluated with 24 normal-hearing subjects. All 96 stimuli were characterized based on their stimulus disparity, which was obtained from a probabilistic model (cf. Magnotti & Beauchamp, 2015). Moreover, the McGurk effect was studied in eight adult cochlear implant (CI) users. By applying the individual, stimulus-independent parameters of the probabilistic model, the predicted effect of stronger audio-visual integration in CI users could be confirmed, demonstrating the validity of the new stimulus material.

User testing and performance evaluation of the Electronic Quality Improvement Platform for Plans and Pharmacies.

PubMed

Pringle, Janice L; Kearney, Shannon M; Grasso, Kim; Boyer, Annette D; Conklin, Mark H; Szymanski, Keith A

2015-01-01

To user-test and evaluate a performance information management platform that makes standardized, benchmarked medication use quality data available to both health plans and community pharmacy organizations. Multiple health/drug plans and multiple chain and independent pharmacies across the United States. During the first phase of the study, user experience was measured via user satisfaction surveys and interviews with key personnel (pharmacists, pharmacy leaders, and health plan leadership). Improvements were subsequently made to the platform based on these findings. During the second phase of the study, the platform was implemented in a greater number of pharmacies and by a greater number of payers. User experience was then reevaluated to gather information for further improvements. The surveys and interviews revealed that users found the Web-based platform easy to use and beneficial in terms of understanding and comparing performance metrics. Primary concerns included lack of access to real-time data and patient-specific data. Many users also expressed uncertainty as to how they could use the information and data provided by the platform. The study findings indicate that while information management platforms can be used effectively in both pharmacy and health plan settings, future development is needed to ensure that the provided data can be transferred to pharmacy best practices and improved quality care.

CE-QUAL-W2: A Numerical Two-Dimensional, Laterally Averaged Model of Hydrodynamics and Water Quality; User’s Manual.

DTIC Science & Technology

1986-08-01

publication by Ms. Jessica S. Ruff, Information Products Division, WES. This manual is published in loose-leaf format for convenience in ." ._ periodic...transfer computations. m. Variety of output options. Background 8. This manual is a product of a program of evaluation and refinement of mathematical water...zooplankton and higher order herbivores. However, these groups are presently not included in the model. Macrophyte production may also have an impact upon

Differentiated strategies for improving streaming service quality

NASA Astrophysics Data System (ADS)

An, Hui; Chen, Xin-Meng

2005-02-01

With the explosive growth of streaming services, users are becoming more and more sensitive to its quality of service. To handle these problems, the research community focuses of the application of caching and replication techniques. But most approaches try to find specific strategies of caching of replication that suit for streaming service characteristics and to design some kind of universal policy to deal with all streaming objects. This paper explores the combination of caching and replication for improving streaming service quality and demonstrates that it makes sense to incorporate two technologies. It provides a system model and discusses some related issues of how to determining a refreshable streaming object and which refreshment policies a refreshable object should use.

Insights into Library Services and Users from Qualitative Research.

ERIC Educational Resources Information Center

Lincoln, Yvonna S.

2002-01-01

Describes a study that used interview data to adapt SERVQUAL, a survey to determine customer perceptions of service quality, to LibQUAL[TM], a Web-based survey to investigate users' perceptions of library service quality. Offers hypotheses regarding how data was categorized as it was. (Author/LRW)

Characterization of urban air quality using GIS as a management system.

PubMed

Puliafito, E; Guevara, M; Puliafito, C

2003-01-01

Keeping the air quality acceptable has become an important task for decision makers as well as for non-governmental organizations. Particulate and gaseous emissions of pollutant from industries and auto-exhausts are responsible for rising discomfort, increasing airway diseases, decreasing productivity and the deterioration of artistic and cultural patrimony in urban centers. A model to determine the air quality in urban areas using a geographical information system will be presented here. This system permits the integration, handling, analysis and simulation of spatial and temporal data of the ambient concentration of the main pollutant. It allows the users to characterize and recognize areas with a potential increase or improvement in its air pollution situation. It is also possible to compute past or present conditions by changing basic input information as traffic flow, or stack emission rates. Additionally the model may be used to test the compliance of local standard air quality, to study the environmental impact of new industries or to determine the changes in the conditions when the vehicle circulation is increased.

Nurses' Satisfaction With Using Nursing Information Systems From Technology Acceptance Model and Information Systems Success Model Perspectives: A Reductionist Approach.

PubMed

Lin, Hsien-Cheng

2017-02-01

Nursing information systems can enhance nursing practice and the efficiency and quality of administrative affairs within the nursing department and thus have been widely considered for implementation. Close alignment of human-computer interaction can advance optimal clinical performance with the use of information systems. However, a lack of introduction of the concept of alignment between users' perceptions and technological functionality has caused dissatisfaction, as shown in the existing literature. This study provides insight into the alignment between nurses' perceptions and how technological functionality affects their satisfaction with Nursing Information System use through a reductionist perspective of alignment. This cross-sectional study collected data from 531 registered nurses in Taiwan. The results indicated that "perceived usefulness in system quality alignment," "perceived usefulness in information quality alignment," "perceived ease of use in system quality alignment," "perceived ease of use in information quality alignment," and "perceived ease of use in service quality alignment" have significantly affected nurses' satisfaction with Nursing Information System use. However, "perceived usefulness in service quality alignment" had no significant effect on nurses' satisfaction. This study also provides some meaningful implications for theoretical and practical aspects of design.

Quality metrics in high-dimensional data visualization: an overview and systematization.

PubMed

Bertini, Enrico; Tatu, Andrada; Keim, Daniel

2011-12-01

In this paper, we present a systematization of techniques that use quality metrics to help in the visual exploration of meaningful patterns in high-dimensional data. In a number of recent papers, different quality metrics are proposed to automate the demanding search through large spaces of alternative visualizations (e.g., alternative projections or ordering), allowing the user to concentrate on the most promising visualizations suggested by the quality metrics. Over the last decade, this approach has witnessed a remarkable development but few reflections exist on how these methods are related to each other and how the approach can be developed further. For this purpose, we provide an overview of approaches that use quality metrics in high-dimensional data visualization and propose a systematization based on a thorough literature review. We carefully analyze the papers and derive a set of factors for discriminating the quality metrics, visualization techniques, and the process itself. The process is described through a reworked version of the well-known information visualization pipeline. We demonstrate the usefulness of our model by applying it to several existing approaches that use quality metrics, and we provide reflections on implications of our model for future research. © 2010 IEEE

MethLAB: a graphical user interface package for the analysis of array-based DNA methylation data.

PubMed

Kilaru, Varun; Barfield, Richard T; Schroeder, James W; Smith, Alicia K; Conneely, Karen N

2012-03-01

Recent evidence suggests that DNA methylation changes may underlie numerous complex traits and diseases. The advent of commercial, array-based methods to interrogate DNA methylation has led to a profusion of epigenetic studies in the literature. Array-based methods, such as the popular Illumina GoldenGate and Infinium platforms, estimate the proportion of DNA methylated at single-base resolution for thousands of CpG sites across the genome. These arrays generate enormous amounts of data, but few software resources exist for efficient and flexible analysis of these data. We developed a software package called MethLAB (http://genetics.emory.edu/conneely/MethLAB) using R, an open source statistical language that can be edited to suit the needs of the user. MethLAB features a graphical user interface (GUI) with a menu-driven format designed to efficiently read in and manipulate array-based methylation data in a user-friendly manner. MethLAB tests for association between methylation and relevant phenotypes by fitting a separate linear model for each CpG site. These models can incorporate both continuous and categorical phenotypes and covariates, as well as fixed or random batch or chip effects. MethLAB accounts for multiple testing by controlling the false discovery rate (FDR) at a user-specified level. Standard output includes a spreadsheet-ready text file and an array of publication-quality figures. Considering the growing interest in and availability of DNA methylation data, there is a great need for user-friendly open source analytical tools. With MethLAB, we present a timely resource that will allow users with no programming experience to implement flexible and powerful analyses of DNA methylation data.

Co-designing for quality: Creating a user-driven tool to improve quality in youth mental health services.

PubMed

Hackett, Christina L; Mulvale, Gillian; Miatello, Ashleigh

2018-04-29

Although high quality mental health care for children and youth is a goal of many health systems, little is known about the dimensions of quality mental health care from users' perspectives. We engaged young people, caregivers and service providers to share experiences, which shed light on quality dimensions for youth mental health care. Using experience-based co-design, we collected qualitative data from young people aged 16-24 with a mental disorder (n = 19), identified caregivers (n = 12) and service providers (n = 14) about their experiences with respect to youth mental health services. Experience data were collected using multiple approaches including interviews, a suite of online and smartphone applications (n = 22), and a co-design event (n = 16) and analysed to extract touch points. These touch points were used to prioritize and co-design a user-driven prototype of a questionnaire to provide feedback to service providers. Young people, caregiver and service provider reports of service experiences were used to identify aspects of care quality at eight mental health service contact points: Access to mental health care; Transfer to/from hospital; Intake into hospital; Services provided; Assessment and treatment; Treatment environment; and Caregiver involvement in care. In some cases, low quality care was harmful to users and their caregivers. Young people co-designed a prototype of a user-driven feedback questionnaire to improve quality of service experiences that was supported by service providers and caregivers at the co-design event. By using EBCD to capture in-depth data regarding experiences of young people, their caregivers and service providers, study participants have begun to establish a baseline for acceptable quality of mental health care for young people. © 2018 The Authors. Health Expectations published by John Wiley & Sons Ltd.

Exploring beliefs about dietary supplement use: focus group discussions with Dutch adults.

PubMed

Pajor, Emília Margit; Oenema, Anke; Eggers, Sander Matthijs; de Vries, Hein

2017-10-01

Although dietary supplement use is increasing in Europe and the USA, little research involving adults' beliefs regarding dietary supplements has been conducted. Therefore, the present study aimed to explore and compare users' and non-users' beliefs towards dietary supplements. Thirteen focus group discussions were conducted of which seven groups were dietary supplement users and six groups were non-users. Based on the socio-cognitive factors of the Integrated Change Model, a semi-structured topic guide was set up. The discussions were audio-recorded and subjected to qualitative content analysis, applying the framework approach. Data were collected in Maastricht, the Netherlands, in 2014 and 2015. In total fifty-six individuals participated in the study, of whom twenty-eight were dietary supplement users and twenty-eight non-users. The average age of participants was 42·9 years. Dietary supplement users' attitude beliefs were mainly related to mental and physical health enhancement, illness prevention and curative health benefits. Users were critical of the nutritional knowledge of health professionals and of the quality of food products. Non-users were convinced that the human body does not need any support and that regular food is enough to cover one's nutritional needs. Users and non-users held comparable beliefs regarding the definition and risks of dietary supplements, and perceived social influences. In their decision about dietary supplement use, both groups were guided by their own convictions to a great extent. Both groups would benefit from improved understanding of the health effects of dietary supplements to improve informed decision making.

Combining Archetypes, Ontologies and Formalization Enables Automated Computation of Quality Indicators.

PubMed

Legaz-García, María Del Carmen; Dentler, Kathrin; Fernández-Breis, Jesualdo Tomás; Cornet, Ronald

2017-01-01

ArchMS is a framework that represents clinical information and knowledge using ontologies in OWL, which facilitates semantic interoperability and thereby the exploitation and secondary use of clinical data. However, it does not yet support the automated assessment of quality of care. CLIF is a stepwise method to formalize quality indicators. The method has been implemented in the CLIF tool which supports its users in generating computable queries based on a patient data model which can be based on archetypes. To enable the automated computation of quality indicators using ontologies and archetypes, we tested whether ArchMS and the CLIF tool can be integrated. We successfully automated the process of generating SPARQL queries from quality indicators that have been formalized with CLIF and integrated them into ArchMS. Hence, ontologies and archetypes can be combined for the execution of formalized quality indicators.

Online health information on obesity in pregnancy: a systematic review.

PubMed

Al Wattar, Bassel H; Pidgeon, Connie; Learner, Hazel; Zamora, Javier; Thangaratinam, Shakila

2016-11-01

To assess the quality of health information available online for healthcare users on obesity in pregnancy and evaluate the role of the internet as an effective medium to advocate a healthy lifestyle in pregnancy. We used the poly-search engine Polymeta and complimented the results with Google searches (till July 2015) to identify relevant websites. All open access websites in English providing advice on the risks and management of obesity in pregnancy. Two independent reviewers assessed the quality of information provided in each of the included websites for credibility, accuracy, readability, content quality and technology. We compared websites 'quality according to their target population, health topic and source of funding'. Fifty-three websites were included. A third of websites were focused on obesity in pregnancy and two thirds targeted healthcare users. The median value for the overall credibility was 5/9, 7/12 for accuracy, 57.6/100 for readability, 45/80 for content quality and 75/100 for technology. Obesity specific websites provided lower credibility compared to general health websites (p=0.008). Websites targeting health users were easier to read (p=0.001). Non-governmental funded websites demonstrated higher content quality (p=0.005). Websites that are obesity focused, targeting health users and funded by non-governmental bodies demonstrated higher composite quality scores (p=0.048). Online information on obesity in pregnancy is varied. Governmental bodies in particular need to invest more efforts to improve the quality of online health information. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Systematic synthesis of barriers and facilitators to service user-led care planning.

PubMed

Bee, Penny; Price, Owen; Baker, John; Lovell, Karina

2015-08-01

Service user (patient) involvement in care planning is a principle enshrined by mental health policy yet often attracts criticism from patients and carers in practice. To examine how user-involved care planning is operationalised within mental health services and to establish where, how and why challenges to service user involvement occur. Systematic evidence synthesis. Synthesis of data from 117 studies suggests that service user involvement fails because the patients' frame of reference diverges from that of providers. Service users and carers attributed highest value to the relational aspects of care planning. Health professionals inconsistently acknowledged the quality of the care planning process, tending instead to define service user involvement in terms of quantifiable service-led outcomes. Service user-involved care planning is typically operationalised as a series of practice-based activities compliant with auditor standards. Meaningful involvement demands new patient-centred definitions of care planning quality. New organisational initiatives should validate time spent with service users and display more tangible and flexible commitments to meeting their needs. © The Royal College of Psychiatrists 2015.

Systematic synthesis of barriers and facilitators to service user-led care planning

PubMed Central

Bee, Penny; Price, Owen; Baker, John; Lovell, Karina

2015-01-01

Background Service user (patient) involvement in care planning is a principle enshrined by mental health policy yet often attracts criticism from patients and carers in practice. Aims To examine how user-involved care planning is operationalised within mental health services and to establish where, how and why challenges to service user involvement occur. Method Systematic evidence synthesis. Results Synthesis of data from 117 studies suggests that service user involvement fails because the patients' frame of reference diverges from that of providers. Service users and carers attributed highest value to the relational aspects of care planning. Health professionals inconsistently acknowledged the quality of the care planning process, tending instead to define service user involvement in terms of quantifiable service-led outcomes. Conclusions Service user-involved care planning is typically operationalised as a series of practice-based activities compliant with auditor standards. Meaningful involvement demands new patient-centred definitions of care planning quality. New organisational initiatives should validate time spent with service users and display more tangible and flexible commitments to meeting their needs. PMID:26243762

Quality assessment of Isfahan Medical Faculty web site electronic services and prioritizing solutions using analytic hierarchy process approach

PubMed Central

Hajrahimi, Nafiseh; Dehaghani, Sayed Mehdi Hejazi; Hajrahimi, Nargess; Sarmadi, Sima

2014-01-01

Context: Implementing information technology in the best possible way can bring many advantages such as applying electronic services and facilitating tasks. Therefore, assessment of service providing systems is a way to improve the quality and elevate these systems including e-commerce, e-government, e-banking, and e-learning. Aims: This study was aimed to evaluate the electronic services in the website of Isfahan University of Medical Sciences in order to propose solutions to improve them. Furthermore, we aim to rank the solutions based on the factors that enhance the quality of electronic services by using analytic hierarchy process (AHP) method. Materials and Methods: Non-parametric test was used to assess the quality of electronic services. The assessment of propositions was based on Aqual model and they were prioritized using AHP approach. The AHP approach was used because it directly applies experts’ deductions in the model, and lead to more objective results in the analysis and prioritizing the risks. After evaluating the quality of the electronic services, a multi-criteria decision making frame-work was used to prioritize the proposed solutions. Statistical Analysis Used: Non-parametric tests and AHP approach using Expert Choice software. Results: The results showed that students were satisfied in most of the indicators. Only a few indicators received low satisfaction from students including, design attractiveness, the amount of explanation and details of information, honesty and responsiveness of authorities, and the role of e-services in the user's relationship with university. After interviewing with Information and Communications Technology (ICT) experts at the university, measurement criteria, and solutions to improve the quality were collected. The best solutions were selected by EC software. According to the results, the solution “controlling and improving the process in handling users complaints” is of the utmost importance and authorities have to have it on the website and place great importance on updating this process. Conclusions: Although, 4 out of the 22 indicators used in the test hypothesis were not confirmed, the results show that these assumptions are accepted at 95% confidence level. To improve the quality of electronic services, special attention should be paid to “services interaction.” As the results showed having “controlling and improving the process in handling users complaints” on the website is the first and most important one and the process of “changing brand/factory name/address in the text of the factory license/renewal or modification of manufacturing license/changing the formula” is the least important one. PMID:25540790

Quality assessment of Isfahan Medical Faculty web site electronic services and prioritizing solutions using analytic hierarchy process approach.

PubMed

Hajrahimi, Nafiseh; Dehaghani, Sayed Mehdi Hejazi; Hajrahimi, Nargess; Sarmadi, Sima

2014-01-01

Implementing information technology in the best possible way can bring many advantages such as applying electronic services and facilitating tasks. Therefore, assessment of service providing systems is a way to improve the quality and elevate these systems including e-commerce, e-government, e-banking, and e-learning. This study was aimed to evaluate the electronic services in the website of Isfahan University of Medical Sciences in order to propose solutions to improve them. Furthermore, we aim to rank the solutions based on the factors that enhance the quality of electronic services by using analytic hierarchy process (AHP) method. Non-parametric test was used to assess the quality of electronic services. The assessment of propositions was based on Aqual model and they were prioritized using AHP approach. The AHP approach was used because it directly applies experts' deductions in the model, and lead to more objective results in the analysis and prioritizing the risks. After evaluating the quality of the electronic services, a multi-criteria decision making frame-work was used to prioritize the proposed solutions. Non-parametric tests and AHP approach using Expert Choice software. The results showed that students were satisfied in most of the indicators. Only a few indicators received low satisfaction from students including, design attractiveness, the amount of explanation and details of information, honesty and responsiveness of authorities, and the role of e-services in the user's relationship with university. After interviewing with Information and Communications Technology (ICT) experts at the university, measurement criteria, and solutions to improve the quality were collected. The best solutions were selected by EC software. According to the results, the solution "controlling and improving the process in handling users complaints" is of the utmost importance and authorities have to have it on the website and place great importance on updating this process. Although, 4 out of the 22 indicators used in the test hypothesis were not confirmed, the results show that these assumptions are accepted at 95% confidence level. To improve the quality of electronic services, special attention should be paid to "services interaction." As the results showed having "controlling and improving the process in handling users complaints" on the website is the first and most important one and the process of "changing brand/factory name/address in the text of the factory license/renewal or modification of manufacturing license/changing the formula" is the least important one.

Cost Effectiveness of Gastroprotection with Proton Pump Inhibitors in Older Low-Dose Acetylsalicylic Acid Users in the Netherlands.

PubMed

Chau, Sek Hung; Sluiter, Reinier L; Kievit, Wietske; Wensing, Michel; Teichert, Martina; Hugtenburg, Jacqueline G

2017-05-01

The present study aimed to assess the cost effectiveness of concomitant proton pump inhibitor (PPI) treatment in low-dose acetylsalicylic acid (LDASA) users at risk of upper gastrointestinal (UGI) adverse effects as compared with no PPI co-medication with attention to the age-dependent influence of PPI-induced adverse effects. We used a Markov model to compare the strategy of PPI co-medication with no PPI co-medication in older LDASA users at risk of UGI adverse effects. As PPIs reduce the risk of UGI bleeding and dyspepsia, these risk factors were modelled together with PPI adverse effects for LDASA users 60-69, 70-79 (base case) and 80 years and older. Incremental cost-utility ratios (ICURs) were calculated as cost per quality-adjusted life-year (QALY) gained per age category. Furthermore, a budget impact analysis assessed the expected changes in expenditure of the Dutch healthcare system following the adoption of PPI co-treatment in all LDASA users potentially at risk of UGI adverse effects. PPI co-treatment of 70- to 79-year-old LDASA users, as compared with no PPI, resulted in incremental costs of €100.51 at incremental effects of 0.007 QALYs with an ICUR of €14,671/QALY. ICURs for 60- to 69-year-old LDASA users were €13,264/QALY and €64,121/QALY for patients 80 years and older. Initiation of PPI co-treatment for all Dutch LDASA users of 60 years and older at risk of UGI adverse effects but not prescribed a PPI (19%) would have cost €1,280,478 in the first year (year 2013 values). PPI co-medication in LDASA users at risk of UGI adverse effects is generally cost effective. However, this strategy becomes less cost effective with higher age, particularly in patients aged 80 years and older, mainly due to the increased risks of PPI-induced adverse effects.

Identifying profiles of service users in housing services and exploring their quality of life and care needs.

PubMed

Bitter, Neis A; Roeg, Diana P K; van Nieuwenhuizen, Chijs; van Weeghel, Jaap

2016-11-23

Housing services aim to support people with mental illness in their daily life and recovery. As the level of recovery differs between service users, the quality of life and care needs also might vary. However, the type and amount of care and support that service users receive do not always match their recovery. In order to improve the quality of care, this study aims to explore whether subgroups of service users exist based on three dimensions of recovery and to examine and compare the quality of life and care needs of the persons in these subgroups. Latent class analysis was performed with data from 263 service users of housing services in the Netherlands. Classes were based on three variables: personal recovery (Mental Health Recovery Measure), social recovery (Social Functioning Scale), and clinical recovery (Brief Symptom Inventory). Subsequently, the quality of life (MANSA) and care needs (CANSAS) of the different classes were analysed by the use of descriptive and inferential statistics. Three classes could be distinguished. Class 1 (45%) comprised of people who score the highest of the three classes in terms of personal and social recovery and who experience the least number of symptoms. People in class 2 (44%) and class 3 (11%) score significantly lower on personal and social recovery, and they experience significantly more symptoms compared to class 1. The distinction between class 2 and 3 can be made on the significantly higher number of symptoms in class 3. All three classes differ significantly on quality of life and unmet needs. The quality of life of service users of housing services needs improvement, as even persons in the best-recovered subgroup have a lower quality of life than the average population. Workers of housing services need to be aware of the recovery of a client and what his or her individual needs and goals are. Furthermore, better care (allocation) concerning mental and physical health and rehabilitation is needed. Care should be provided on all dimensions of recovery at the same time, therefore mental health care organisations should work together and integrate their services. ISRCTN registry ISRCTN77355880 retrospectively registered 05/07/2013.

The Soil and Water Assessment Tool (SWAT) Ecohydrological Model Circa 2015: Global Application Trends, Insights and Issues

NASA Astrophysics Data System (ADS)

Gassman, P. W.; Arnold, J. G.; Srinivasan, R.

2015-12-01

The Soil and Water Assessment Tool (SWAT) is one of the most widely used watershed-scale water quality models in the world. Over 2,000 peer-reviewed SWAT-related journal articles have been published and hundreds of other studies have been published in conference proceedings and other formats. The use of SWAT was initially concentrated in North America and Europe but has also expanded dramatically in other countries and regions during the past decade including Brazil, China, India, Iran, South Korea, Southeast Asia and eastern Africa. The SWAT model has proven to be a very flexible tool for investigating a broad range of hydrologic and water quality problems at different watershed scales and environmental conditions, and has proven very adaptable for applications requiring improved hydrologic and other enhanced simulation needs. We investigate here the various technological, networking, and other factors that have supported the expanded use of SWAT, and also highlight current worldwide simulation trends and possible impediments to future increased usage of the model. Examples of technological advances include easy access to web-based documentation, user-support groups, and SWAT literature, a variety of Geographic Information System (GIS) interface tools, pre- and post-processing calibration software and other software, and an open source code which has served as a model development catalyst for multiple user groups. Extensive networking regarding the use of SWAT has further occurred via internet-based user support groups, model training workshops, regional working groups, regional and international conferences, and targeted development workshops. We further highlight several important model development trends that have emerged during the past decade including improved hydrologic, cropping system, best management practice (BMP) and pollutant transport simulation methods. In addition, several current SWAT weaknesses will be addressed and key development needs will be described including the ability to represent landscapes and practices with more spatial definition, the incorporation of a module specifically designed to simulate rice paddy systems and algorithms that can capture plant competition dynamics such as occur in complex tree/crop systems and interactions between crops and weeds.

MethLAB

PubMed Central

Kilaru, Varun; Barfield, Richard T; Schroeder, James W; Smith, Alicia K

2012-01-01

Recent evidence suggests that DNA methylation changes may underlie numerous complex traits and diseases. The advent of commercial, array-based methods to interrogate DNA methylation has led to a profusion of epigenetic studies in the literature. Array-based methods, such as the popular Illumina GoldenGate and Infinium platforms, estimate the proportion of DNA methylated at single-base resolution for thousands of CpG sites across the genome. These arrays generate enormous amounts of data, but few software resources exist for efficient and flexible analysis of these data. We developed a software package called MethLAB (http://genetics.emory.edu/conneely/MethLAB) using R, an open source statistical language that can be edited to suit the needs of the user. MethLAB features a graphical user interface (GUI) with a menu-driven format designed to efficiently read in and manipulate array-based methylation data in a user-friendly manner. MethLAB tests for association between methylation and relevant phenotypes by fitting a separate linear model for each CpG site. These models can incorporate both continuous and categorical phenotypes and covariates, as well as fixed or random batch or chip effects. MethLAB accounts for multiple testing by controlling the false discovery rate (FDR) at a user-specified level. Standard output includes a spreadsheet-ready text file and an array of publication-quality figures. Considering the growing interest in and availability of DNA methylation data, there is a great need for user-friendly open source analytical tools. With MethLAB, we present a timely resource that will allow users with no programming experience to implement flexible and powerful analyses of DNA methylation data. PMID:22430798

The public gets what the public wants: experiences of public reporting in long-term care in Europe.

PubMed

Rodrigues, Ricardo; Trigg, Lisa; Schmidt, Andrea E; Leichsenring, Kai

2014-05-01

Public reporting of quality in long-term care is advocated on the basis of allowing providers to improve their performance by benchmarking and supporting users to choose the best providers. Both mechanisms are intended to drive improvements in quality. However, there is relatively scarce comparative research on the experiences and impact of public reporting on quality in long-term care in Europe. Using information gathered from key informants by means of a structured questionnaire and country profiles, this paper discusses experiences with public reporting mechanisms in seven European countries and available information on their impact on quality in long-term care. Countries surveyed included a variety of public reporting schemes, ranging from pilot programmes to statutory mechanisms. Public reporting mechanisms more often focus on institutional care. Inspections carried out as part of a legal quality assurance framework are the main source of information gathering, supplemented by provider self-assessments in the context of internal quality management and user satisfaction surveys. Information on quality goes well beyond structural indicators to also include indicators on quality of life of users. Information is displayed using numerical scores (percentages), but also measures such as ratings (similar to school grades) and ticks and crosses. Only one country corrects for case-mix. The internet is the preferred medium of displaying information. There was little evidence to show whether public reporting has a significant impact on driving users' choices of provider. Studies reported low awareness of quality indicators among potential end users and information was not always displayed in a convenient format, e.g. through complicated numerical scores. There is scarce evidence of public reporting directly causing improved quality, although the relative youth and the pilot characteristics of some of the schemes covered here could also have contributed to downplay their impact. The establishment of public reporting mechanisms did however contribute to shaping the discussion on quality measurement in several of the countries surveyed. The findings presented in this paper highlight the need to consider some factors in the discussion of the impact of public reporting in long-term care, namely, the organisation of care markets, frequently characterised by limited competition; the circumstances under which user choice takes place, often made under conditions of duress; and the leadership conditions needed to bring about improvements in quality in different care settings. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Exploring personalized searches using tag-based user profiles and resource profiles in folksonomy.

PubMed

Cai, Yi; Li, Qing; Xie, Haoran; Min, Huaqin

2014-10-01

With the increase in resource-sharing websites such as YouTube and Flickr, many shared resources have arisen on the Web. Personalized searches have become more important and challenging since users demand higher retrieval quality. To achieve this goal, personalized searches need to take users' personalized profiles and information needs into consideration. Collaborative tagging (also known as folksonomy) systems allow users to annotate resources with their own tags, which provides a simple but powerful way for organizing, retrieving and sharing different types of social resources. In this article, we examine the limitations of previous tag-based personalized searches. To handle these limitations, we propose a new method to model user profiles and resource profiles in collaborative tagging systems. We use a normalized term frequency to indicate the preference degree of a user on a tag. A novel search method using such profiles of users and resources is proposed to facilitate the desired personalization in resource searches. In our framework, instead of the keyword matching or similarity measurement used in previous works, the relevance measurement between a resource and a user query (termed the query relevance) is treated as a fuzzy satisfaction problem of a user's query requirements. We implement a prototype system called the Folksonomy-based Multimedia Retrieval System (FMRS). Experiments using the FMRS data set and the MovieLens data set show that our proposed method outperforms baseline methods. Copyright © 2014 Elsevier Ltd. All rights reserved.

End-user perspective of low-cost sensors for outdoor air pollution monitoring.

PubMed

Rai, Aakash C; Kumar, Prashant; Pilla, Francesco; Skouloudis, Andreas N; Di Sabatino, Silvana; Ratti, Carlo; Yasar, Ansar; Rickerby, David

2017-12-31

Low-cost sensor technology can potentially revolutionise the area of air pollution monitoring by providing high-density spatiotemporal pollution data. Such data can be utilised for supplementing traditional pollution monitoring, improving exposure estimates, and raising community awareness about air pollution. However, data quality remains a major concern that hinders the widespread adoption of low-cost sensor technology. Unreliable data may mislead unsuspecting users and potentially lead to alarming consequences such as reporting acceptable air pollutant levels when they are above the limits deemed safe for human health. This article provides scientific guidance to the end-users for effectively deploying low-cost sensors for monitoring air pollution and people's exposure, while ensuring reasonable data quality. We review the performance characteristics of several low-cost particle and gas monitoring sensors and provide recommendations to end-users for making proper sensor selection by summarizing the capabilities and limitations of such sensors. The challenges, best practices, and future outlook for effectively deploying low-cost sensors, and maintaining data quality are also discussed. For data quality assurance, a two-stage sensor calibration process is recommended, which includes laboratory calibration under controlled conditions by the manufacturer supplemented with routine calibration checks performed by the end-user under final deployment conditions. For large sensor networks where routine calibration checks are impractical, statistical techniques for data quality assurance should be utilised. Further advancements and adoption of sophisticated mathematical and statistical techniques for sensor calibration, fault detection, and data quality assurance can indeed help to realise the promised benefits of a low-cost air pollution sensor network. Copyright © 2017 Elsevier B.V. All rights reserved.

Gaze-Aware Streaming Solutions for the Next Generation of Mobile VR Experiences.

PubMed

Lungaro, Pietro; Sjoberg, Rickard; Valero, Alfredo Jose Fanghella; Mittal, Ashutosh; Tollmar, Konrad

2018-04-01

This paper presents a novel approach to content delivery for video streaming services. It exploits information from connected eye-trackers embedded in the next generation of VR Head Mounted Displays (HMDs). The proposed solution aims to deliver high visual quality, in real time, around the users' fixations points while lowering the quality everywhere else. The goal of the proposed approach is to substantially reduce the overall bandwidth requirements for supporting VR video experiences while delivering high levels of user perceived quality. The prerequisites to achieve these results are: (1) mechanisms that can cope with different degrees of latency in the system and (2) solutions that support fast adaptation of video quality in different parts of a frame, without requiring a large increase in bitrate. A novel codec configuration, capable of supporting near-instantaneous video quality adaptation in specific portions of a video frame, is presented. The proposed method exploits in-built properties of HEVC encoders and while it introduces a moderate amount of error, these errors are indetectable by users. Fast adaptation is the key to enable gaze-aware streaming and its reduction in bandwidth. A testbed implementing gaze-aware streaming, together with a prototype HMD with in-built eye tracker, is presented and was used for testing with real users. The studies quantified the bandwidth savings achievable by the proposed approach and characterize the relationships between Quality of Experience (QoE) and network latency. The results showed that up to 83% less bandwidth is required to deliver high QoE levels to the users, as compared to conventional solutions.

Has the quality of health care for the immigrant population changed during the economic crisis in Catalonia (Spain)? Opinions of health professionals and immigrant users.

PubMed

Porthé, Victoria; Vargas, Ingrid; Ronda, Elena; Malmusi, Davide; Bosch, Lola; Vázquez, M Luisa

2017-06-02

To analyse changes in health professionals' and immigrant users' perceptions of the quality of care provided to the immigrant population during the crisis. A qualitative descriptive-interpretative and exploratory study was conducted in two areas of Catalonia. Semi-structured individual interviews were used with a theoretical sample of medical (n=24) and administrative (n=10) professionals in primary care (PC) and secondary care (SC), and immigrant users (n=20). Thematic analysis was conducted and the results were triangulated. Problems related to technical and interpersonal quality emerged from the discourse of both professionals and immigrants. These problems were attributed to cutbacks during the economic crisis. Regarding technical quality, respondents reported an increase in erroneous or non-specific diagnoses, inappropriate use of diagnostic tests and non-specific treatments, due to reduction in consultation times as a result of cuts in human resources. With regard to interpersonal quality, professionals reported less empathy, and users also reported worse communication, due to changes in professionals' working conditions and users' attitudes. Finally, a reduction in the resolution capacity of the health services emerged: professionals described unnecessary repeated PC visits and limited responses in SC, while young immigrants reported an insufficient response to their health problems. The results indicate a deterioration in perceived technical and interpersonal quality during the economic crisis, due to cutbacks mainly in human resources. These changes affect the whole population, but especially immigrants. Copyright © 2017 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Model-driven approach to data collection and reporting for quality improvement.

PubMed

Curcin, Vasa; Woodcock, Thomas; Poots, Alan J; Majeed, Azeem; Bell, Derek

2014-12-01

Continuous data collection and analysis have been shown essential to achieving improvement in healthcare. However, the data required for local improvement initiatives are often not readily available from hospital Electronic Health Record (EHR) systems or not routinely collected. Furthermore, improvement teams are often restricted in time and funding thus requiring inexpensive and rapid tools to support their work. Hence, the informatics challenge in healthcare local improvement initiatives consists of providing a mechanism for rapid modelling of the local domain by non-informatics experts, including performance metric definitions, and grounded in established improvement techniques. We investigate the feasibility of a model-driven software approach to address this challenge, whereby an improvement model designed by a team is used to automatically generate required electronic data collection instruments and reporting tools. To that goal, we have designed a generic Improvement Data Model (IDM) to capture the data items and quality measures relevant to the project, and constructed Web Improvement Support in Healthcare (WISH), a prototype tool that takes user-generated IDM models and creates a data schema, data collection web interfaces, and a set of live reports, based on Statistical Process Control (SPC) for use by improvement teams. The software has been successfully used in over 50 improvement projects, with more than 700 users. We present in detail the experiences of one of those initiatives, Chronic Obstructive Pulmonary Disease project in Northwest London hospitals. The specific challenges of improvement in healthcare are analysed and the benefits and limitations of the approach are discussed. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

The development of a model for predicting passenger acceptance of short-haul air transportation systems

NASA Technical Reports Server (NTRS)

Kuhlthau, A. R.; Jacobson, I. D.

1977-01-01

Meaningful criteria and methodology for assessing, particularly in the area of ride quality, the potential acceptability to the traveling public of present and future transportation systems were investigated. Ride quality was found to be one of the important variables affecting the decision of users of air transportation, and to be influenced by several environmental factors, especially motion, noise, pressure, temperature, and seating. Models were developed to quantify the relationship of subjective comfort to all of these parameters and then were exercised for a variety of situations. Passenger satisfaction was found to be strongly related to ride quality and was so modeled. A computer program was developed to assess the comfort and satisfaction levels of passengers on aircraft subjected to arbitrary flight profiles over arbitrary terrain. A model was deduced of the manner in which passengers integrate isolated segments of a flight to obtain an overall trip comfort rating. A method was established for assessing the influence of other links (e.g., access, terminal conditions) in the overall passenger trip.