Remarks of Governor Ted Schwinden to the International Conference of the Council of Educational Facility Planners (64th, Edmonton, Alberta, October 3, 1987.

ERIC Educational Resources Information Center

Montana State Office of the Governor, Helena.

This speech summarizes the recommendations of seven National Governors' Association task forces represented in "Time for Results: The Governors' 1991 Report on Education," highlighting the physical facilities group's concerns. The Task Force on Teaching confronted work force quantity and quality issues and recommended strategies for…

Counterinsurgency Scorecard Update: Afghanistan in Early 2015 Relative to Insurgencies Since World War 2

DTIC Science & Technology

2016-01-01

wins and losses. • The quality of COIN forces is more important than the quantity, especially where para- militaries and irregular forces are concerned...that work, we focus here on the importance of maximizing good factors and minimizing bad factors in defeating insurgencies, as well as how COIN...was of sufficient strength to force the insurgents to fight as guerrillas. Unity of effort/unity of command was maintained. The COIN force avoided

3D Finite Element Modelling of Cutting Forces in Drilling Fibre Metal Laminates and Experimental Hole Quality Analysis

NASA Astrophysics Data System (ADS)

Giasin, Khaled; Ayvar-Soberanis, Sabino; French, Toby; Phadnis, Vaibhav

2017-02-01

Machining Glass fibre aluminium reinforced epoxy (GLARE) is cumbersome due to distinctively different mechanical and thermal properties of its constituents, which makes it challenging to achieve damage-free holes with the acceptable surface quality. The proposed work focuses on the study of the machinability of thin ( 2.5 mm) GLARE laminate. Drilling trials were conducted to analyse the effect of feed rate and spindle speed on the cutting forces and hole quality. The resulting hole quality metrics (surface roughness, hole size, circularity error, burr formation and delamination) were assessed using surface profilometry and optical scanning techniques. A three dimensional (3D) finite-element (FE) model of drilling GLARE laminate was also developed using ABAQUS/Explicit to help understand the mechanism of drilling GLARE. The homogenised ply-level response of GLARE laminate was considered in the FE model to predict cutting forces in the drilling process.

Can fitness and movement quality prevent back injury in elite task force police officers? A 5-year longitudinal study.

PubMed

McGill, Stuart; Frost, David; Lam, Thomas; Finlay, Tim; Darby, Kevin; Cannon, Jordan

2015-01-01

Elite police work has bursts of intense physically demanding work requiring high levels of fitness, or capacity, and movement competency; which are assumed to increase one's injury resilience. The purpose of this study was to follow members of an elite police force (N = 53) to test whether back injuries (N = 14) could be predicted from measures of fitness and movement quality. Measures of torso endurance, relative and absolute strength, hip ROM and movement quality using the Functional Movement Screen(TM) and other dynamic movement tests were obtained from every officer at baseline. When variables were grouped and considered holistically, rather than individually, back injury could be predicted. Seven variables best predicted those who would suffer a back injury (64% sensitivity and 95% specificity for an overall concordance of 87%). Overall, the ability to predict back injury was not high, suggesting that there is more complexity to this relationship than is explained with the variables tested here. Practitioner Summary: Members of elite police forces have exposure to intense physically demanding work. Increased levels of fitness and movement competency have been assumed to increase injury resilience. However, complexity in the interactions between exposure, movement competency, training, fitness and injury may occlude the true relationship between these variables.

Effects of a performance and quality improvement intervention on the work environment in HIV-related care: a quasi-experimental evaluation in Zambia.

PubMed

Bazant, Eva; Sarkar, Supriya; Banda, Joseph; Kanjipite, Webby; Reinhardt, Stephanie; Shasulwe, Hildah; Mulilo, Joyce Monica Chongo; Kim, Young Mi

2014-12-20

Human resource shortages and reforms in HIV-related care make it challenging for frontline health care providers in southern Africa to deliver high-quality services. At health facilities of the Zambian Defence Forces, a performance and quality improvement approach was implemented to improve HIV-related care and was evaluated in 2010/2011. Changes in providers' work environment and perceived quality of HIV-related care were assessed to complement data of provider performance. The intervention involved on-site training, supportive supervision, and action planning focusing on detailed service delivery standards. The quasi-experimental evaluation collected pre- and post-intervention data from eight intervention and comparison facilities matched on defence force branch and baseline client volume. Overall, 101 providers responded to a 24-item questionnaire on the work environment, covering topics of drugs, supplies, and equipment; training, feedback, and supervision; compensation; staffing; safety; fulfilment; and HIV services quality. In bivariate analysis and multivariate analyses, we assessed changes within each study group and between the two groups. In the bivariate analysis, the intervention group providers reported improvements in the work environment on adequacy of equipment, feeling safe from harm, confidence in clinical skills, and reduced isolation, while the comparison group reported worsening of the work environment on supplies, training, safety, and departmental morale.In the multivariate analysis, the intervention group's improvement and the comparison group's decline were significant on perceived adequacy of drugs, supplies, and equipment; constructive feedback received from supervisor and co-workers; and feeling safe from physical harm (all P <0.01, except P <0.04 for equipment). Further, the item "provider lacks confidence in some clinical skills" declined in the intervention group but increased in the comparison group (P = -0.005). In multivariate analysis, changes in perceived quality of HIV care did not differ between study groups. Provider perceptions were congruent with observations of preparing drugs, supplies, equipment, and in service delivery of prevention of mother-to-child transmission of HIV and antiretroviral therapy follow-up care. The performance and quality improvement intervention implemented at Zambian Defence Forces' health facilities was associated with improvements in providers' perceptions of work environment consistent with the intervention's focus on commodities, skills acquisition, and receipt of constructive feedback.

Building a Quality Workforce. A Joint Initiative.

ERIC Educational Resources Information Center

Department of Commerce, Washington, DC.

For this joint effort among three Cabinet Agencies, studies by a variety of organizations were reviewed and 134 business leaders and 34 education leaders in many communities throughout the United States were interviewed to determine what businesses find lacking among new entrants into the labor force and what employers' work force needs will be in…

2YC3: A University President's Perspective on Recruitment, Retention, and Quality

NASA Astrophysics Data System (ADS)

Kenkel, John

1997-04-01

"Recruitment and Retention of Chemistry Students" was the theme of the conference of the 2-Year College Chemistry Consortium (2YC3), held at San Antonio College in November 1996. The keynote speaker at the Friday night banquet was Robert Krienke, who is the current president of Lamar University in Beaumont, Texas. Krienke is well known, especially in 2-year colleges that have chemistry technician training programs. He is a chemist with 8 years of industrial experience and has spent 28 years in technical education, including an assignment as a chemical technology instructor at the Texas State Technical College in Waco, Texas. He has long list of service positions on his resume, including public school boards, JTPA (Job Training Partnership Act, a federal workforce training act), Tech Prep, quality work force planning, and school-to-work. He has recently been appointed to the Southeast Texas Work Force Development Board. Krienke's presentation dealt specifically with the issue of quality of 2-year college programs, since, as he stated, quality is the most important factor in student recruitment and retention. He also made some comments regarding education in general in the United States.

Ergonomics and quality management--humans in interaction with technology, work environment, and organization.

PubMed

Eklund, J A

1999-01-01

In many studies, ergonomics has been shown to influence human performance. The aim of this paper was to demonstrate important ergonomics influences on quality in industrial production, from the perspective of interactions between humans, technology, organization, and work environment. A second aim was to elaborate on the implications of these findings for the development of quality management strategies. This paper shows that ergonomics problems in terms of adverse work environmental conditions, inappropriate design of technology, and an unsuitable organization are important causes of quality deficiencies. Problem solving aimed at improving ergonomics, quality, and productivity simultaneously is likely to obtain support from most of the interest parties of the company, and may also enhance participation. Ergonomics has the potential of becoming a driving force for the development of new quality management strategies.

Trial-by-fire transformation: an interview with Globe Metallurgical's Arden C. Sims. Interview by Bruce Rayner.

PubMed

Sims, A C

1992-01-01

Globe Metallurgical Inc., a $115 million supplier of specialty metals, is best known as the first small company to win the Baldrige Award in 1988. But there is much more to this gutsy little company than total quality. During the 1980s, Globe transformed itself from a rust-belt has-been on the verge of bankruptcy into a high-technology, high-quality industry leader. Along the way, the company went private in a management-led leveraged buyout, embraced flexible work teams, adopted a high-value-added, niche marketing strategy, and took its business global. Leading the way in Globe's reinvention was Chief Executive Arden C. Sims, the slow-talking son of a West Virginian coal miner. When he joined the company in 1984, Sims had no experience in the new managerial techniques. He was a product of the old school of management: cut costs and trim operations to regain competitiveness. But he soon discovered that old-style management was not enough to battle offshore competitors, an unproductive work force, rising costs, and outdated production technology. He was forced to go looking for new ideas and practices. In a succession of learning experiences, Sims attended a seminar on total quality in 1985, paving the way for the company's quality program; he discovered the power of flexible work teams when management was forced to run the furnaces during a year-long strike; he organized an LBO, allowing him to change the work order even more dramatically; and he took the company global and into highly profitable niche markets by severing a long-standing relationship with Globe's sales and marketing representative. As a result of these and other changes, Globe leads the specialty metals industry in virtually all performance measures.

Total Quality Management: Will It Work in the System Program Office?

DTIC Science & Technology

1990-05-01

Quality Management (TQM) is a relatively new philosophy of management which has high-level Department of Defense support and is presently being implemented in the Air Force. In the Air Force Systems Command, weapon system development and acquisition are carried out in System Program Offices (SPOs), staffed with various functionally oriented specialists supplied to the System Program Director by functional ’home offices’ via a matrix management scheme. Can TQM, relying as it does on cross-functional cooperation and on processes which cross functional lines, be

Psychosocial job quality and mental health among young workers: a fixed-effects regression analysis using 13 waves of annual data.

PubMed

Milner, Allison; Krnjack, Lauren; LaMontagne, Anthony D

2017-01-01

Objectives Entry into employment may be a time when a young person's well-being and mental health is challenged. Specifically, we examined the difference in mental health when a young person was "not in the labor force" (NILF) (ie, non-working activity such as participating in education) compared to being in a job with varying levels of psychosocial quality. Method The data source for this study was the Household Income and Labor Dynamics in Australia (HILDA) study, and the sample included 10 534 young people (aged ≤30 years). We used longitudinal fixed-effects regression to investigate within-person changes in mental health comparing circumstances where individuals were NILF to when they were employed in jobs of varying psychosocial quality. Results Compared to when individuals were not in the labor force, results suggest a statistically significant decline in mental health when young people were employed in jobs with poor psychosocial working conditions and an improvement in mental health when they were employed in jobs with optimal psychosocial working conditions. Our results were robust to various sensitivity tests, including adjustment for life events and the lagged effects of mental health and job stressors. Conclusions If causal, the results suggest that improving the psychosocial quality of work for younger workers will protect and promote their wellbeing, and may reduce the likelihood of mental health problems later on.

Unsatisfactory Performance: How California's K-12 Education System Protects Mediocrity and How Teacher Quality Can Be Improved.

ERIC Educational Resources Information Center

Dawson, Thomas C.; Billingsley, K. Lloyd

This study examines the quality of California's K-12 education, discussing how the system protects mediocrity and how to improve educational quality in the state. It explains that what most ails the teaching force is that excellent teachers are not rewarded for superior work, and failing teachers are rarely held accountable for poor performance.…

Quality Assurance Specifications for Planetary Protection Assays

NASA Astrophysics Data System (ADS)

Baker, Amy

As the European Space Agency planetary protection (PP) activities move forward to support the ExoMars and other planetary missions, it will become necessary to increase staffing of labo-ratories that provide analyses for these programs. Standardization of procedures, a comprehen-sive quality assurance program, and unilateral training of personnel will be necessary to ensure that the planetary protection goals and schedules are met. The PP Quality Assurance/Quality Control (QAQC) program is designed to regulate and monitor procedures performed by labora-tory personnel to ensure that all work meets data quality objectives through the assembly and launch process. Because personnel time is at a premium and sampling schedules are often de-pendent on engineering schedules, it is necessary to have flexible staffing to support all sampling requirements. The most productive approach to having a competent and flexible work force is to establish well defined laboratory procedures and training programs that clearly address the needs of the program and the work force. The quality assurance specification for planetary protection assays has to ensure that labora-tories and associated personnel can demonstrate the competence to perform assays according to the applicable standard AD4. Detailed subjects included in the presentation are as follows: • field and laboratory control criteria • data reporting • personnel training requirements and certification • laboratory audit criteria. Based upon RD2 for primary and secondary validation and RD3 for data quality objectives, the QAQC will provide traceable quality assurance safeguards by providing structured laboratory requirements for guidelines and oversight including training and technical updates, standardized documentation, standardized QA/QC checks, data review and data archiving.

Efficiency of Support Services within the Arizona Universities.

ERIC Educational Resources Information Center

Davis, George H.

One of the working papers in the final report of the Arizona Board of Regents' Task Force on Excellence, Efficiency and Competitiveness, this document discusses the efficiency of the Arizona state universities' support services. Faculty, staff, and students were asked to rate the quality, importance, and change in quality of the services provided…

Implementing Total Quality Management in Vocational Education.

ERIC Educational Resources Information Center

Navaratnam, K. K.; Mountney, Peter

In an internationally competitive training environment, implementation of Total Quality Management (TQM) in vocational education can provide a comparative advantage in preparing the type of work force required for micro and macro economic reforms. The concept of TQM can be used as a management tool to improve the standards of vocational training.…

Recent National Transonic Facility Test Process Improvements (Invited)

NASA Technical Reports Server (NTRS)

Kilgore, W. A.; Balakrishna, S.; Bobbitt, C. W., Jr.; Adcock, J. B.

2001-01-01

This paper describes the results of two recent process improvements; drag feed-forward Mach number control and simultaneous force/moment and pressure testing, at the National Transonic Facility. These improvements have reduced the duration and cost of testing. The drag feed-forward Mach number control reduces the Mach number settling time by using measured model drag in the Mach number control algorithm. Simultaneous force/moment and pressure testing allows simultaneous collection of force/moment and pressure data without sacrificing data quality thereby reducing the overall testing time. Both improvements can be implemented at any wind tunnel. Additionally the NTF is working to develop and implement continuous pitch as a testing option as an additional method to reduce costs and maintain data quality.

Recent National Transonic Facility Test Process Improvements (Invited)

NASA Technical Reports Server (NTRS)

Kilgore, W. A.; Balakrishna, S.; Bobbitt, C. W., Jr.; Adcock, J. B.

2001-01-01

This paper describes the results of two recent process improvements; drag feed-forward Mach number control and simultaneous force/moment and pressure testing, at the National Transonic Facility. These improvements have reduced the duration and cost of testing. The drag feedforward Mach number control reduces the Mach number settling time by using measured model drag in the Mach number control algorithm. Simultaneous force/moment and pressure testing allows simultaneous collection of force/moment and pressure data without sacrificing data quality thereby reducing the overall testing time. Both improvements can be implemented at any wind tunnel. Additionally the NTF is working to develop and implement continuous pitch as a testing option as an additional method to reduce costs and maintain data quality.

In Flight Evaluation of Active Inceptor Force-Feel Characteristics and Handling Qualities

NASA Technical Reports Server (NTRS)

Lusardi, Jeff A.; Blanken, Chris L.; Ott, Carl Raymond; Malpica, Carlos A.; von Gruenhagen, Wolfgang

2012-01-01

The effect of inceptor feel-system characteristics on piloted handling qualities has been a research topic of interest for many years. Most of the research efforts have focused on advanced fly-by-wire fixed-wing aircraft with only a few studies investigating the effects on rotorcraft. Consequently, only limited guidance is available on how cyclic force-feel characteristics should be set to obtain optimal handling qualities for rotorcraft. To study this effect, the U.S. Army Aeroflightdynamics Directorate working with the DLR Institute of Flight Systems in Germany under Task X of the U.S. German Memorandum of Understanding have been conducting flight test evaluations. In the U.S., five experimental test pilots have completed evaluations of two Mission Task Elements (MTEs) from ADS-33E-PRF and two command/response types for a matrix of center-stick cyclic force-feel characteristics at Moffett Field. In Germany, three experimental test Pilots have conducted initial evaluations of the two MTEs with two command/response types for a parallel matrix of side-stick cyclic force-feel characteristics at WTD-61 in Manching. The resulting data set is used to correlate the effect of changes in natural frequency and damping ratio of the cyclic inceptor on the piloted handling qualities. Existing criteria in ADS-33E and a proposed Handling Qualities Sensitivity Function that includes the effects of the cyclic force-feel characteristics are also evaluated against the data set and discussed.

Federal Workforce. A Framework for Studying Its Quality over Time. Report to the Chairman, Committee on Post Office and Civil Service, House of Representatives.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC. Program Evaluation and Methodology Div.

The General Accounting Office (GAO) examined the feasibility of assessing the quality of the federal civilian work force, focusing on professional and administrative staff. The agency developed a measurable definition of quality centered on attributes of the individual and the match of the individual's capabilities to the needs of the job. It…

Recommendations of the wwPDB NMR Validation Task Force

PubMed Central

Montelione, Gaetano T.; Nilges, Michael; Bax, Ad; Güntert, Peter; Herrmann, Torsten; Richardson, Jane S.; Schwieters, Charles; Vranken, Wim F.; Vuister, Geerten W.; Wishart, David S.; Berman, Helen M.; Kleywegt, Gerard J.; Markley, John L.

2013-01-01

As methods for analysis of biomolecular structure and dynamics using nuclear magnetic resonance spectroscopy (NMR) continue to advance, the resulting 3D structures, chemical shifts, and other NMR data are broadly impacting biology, chemistry, and medicine. Structure model assessment is a critical area of NMR methods development, and is an essential component of the process of making these structures accessible and useful to the wider scientific community. For these reasons, the Worldwide Protein Data Bank (wwPDB) has convened an NMR Validation Task Force (NMR-VTF) to work with the wwPDB partners in developing metrics and policies for biomolecular NMR data harvesting, structure representation, and structure quality assessment. This paper summarizes the recommendations of the NMR-VTF, and lays the groundwork for future work in developing standards and metrics for biomolecular NMR structure quality assessment. PMID:24010715

Relationship of airflow limitation severity with work productivity reduction and sick leave in a Japanese working population.

PubMed

Onoue, Ayumi; Omori, Hisamitsu; Katoh, Takahiko; Kubota, Kenichi; Nonami, Yoshio; Ogata, Yasuhiro; Inoue, Hiromasa

2016-01-01

The aim of this study was to reveal the association between airflow limitation (AL) severity and reduction with work productivity as well as use of sick leave among Japanese workers. This cross-sectional study included 1,378 workers who underwent a lung function test during a health checkup at the Japanese Red Cross Kumamoto Health Care Center. AL was defined as forced expiratory volume in 1 second/forced vital capacity of <0.7. Workers completed a questionnaire on productivity loss at work and sick leave. The quality and quantity of productivity loss at work were measured on a ten-point scale indicating how much work was actually performed on the previous workday. Participants were asked how many days in the past 12 months they were unable to work because of health problems. Logistic regression analysis was used to assess the associations between AL severity and the quality and quantity of productivity loss at work as well as use of sick leave. Compared with workers without AL, workers with moderate-to-severe AL showed a significant productivity loss (quality: odds ratio [OR] =2.04, 95% confidence interval [CI]: 1.12-3.71, P=0.02 and quantity: OR =2.19, 95% CI: 1.20-4.00, P=0.011) and use of sick leave (OR =2.69, 95% CI: 1.33-5.44, P=0.006) after adjusting for sex, age, body mass index, smoking status, hypertension, hyperglycemia, dyslipidemia, sleep duration, work hours per day, and workplace smoking environment. AL severity was significantly associated with work productivity loss and use of sick leave. Our findings suggested that early intervention in the subjects with AL at the workforce might be beneficial for promoting work ability.

Tera-node Network Technology (Task 3) Scalable Personal Telecommunications

DTIC Science & Technology

2000-03-14

Simulation results of this work may be found in http://north.east.isi.edu/spt/ audio.html. 6. Internet Research Task Force Reliable Multicast...Adaptation, 4. Multimedia Proxy Caching, 5. Experiments with the Rate Adaptation Protocol (RAP) 6. Providing leadership and innovation to the Internet ... Research Task Force (IRTF) Reliable Multicast Research Group (RMRG) 1. End-to-end Architecture for Quality-adaptive Streaming Applications over the

Cancer survivors. Work related issues.

PubMed

Schultz, Pamela N; Beck, Martha L; Stava, Charles; Sellin, Rena V

2002-05-01

New and more effective treatments for cancer have resulted in individuals living longer with a better quality of life. Many more survivors are employed in the workplace. Cancer is no longer only an issue for survivors and their families; it has become an issue for the employer and the workplace. This article describes survey results of 4,364 long term cancer survivors in which they were asked to respond to items describing their ability to work, job discrimination, and quality of life. Thirty-five percent of survivors were working at the time they completed the survey, and 8.5% considered themselves unable to work. This research has shown that age, gender, ethnic group, and cancer type affected the working status of the survivors. Of survivors continuing to work, 7.3% indicated they had experienced job discrimination. The results indicate most cancer survivors do not perceive employment related problems, and are readily assimilated into the work force. Job discrimination and the ability to work is a quality of life issue.

Development of electromagnetic welding facility of flat plates for nuclear industry

NASA Astrophysics Data System (ADS)

Kumar, Rajesh; Sahoo, Subhanarayan; Sarkar, Biswanath; Shyam, Anurag

2017-04-01

Electromagnetic pulse welding (EMPW) process, one of high speed welding process uses electromagnetic force from discharged current through working coil, which develops a repulsive force between the induced current flowing parallel and in opposite direction. For achieving the successful weldment using this process the design of working coil is the most important factor due to high magnetic field on surface of work piece. In case of high quality flat plate welding factors such as impact velocity, angle of impact standoff distance, thickness of flyer and overlap length have to be chosen carefully. EMPW has wide applications in nuclear industry, automotive industry, aerospace, electrical industries. However formability and weldability still remain major issues. Due to ease in controlling the magnetic field enveloped inside tubes, the EMPW has been widely used for tube welding. In case of flat components control of magnetic field is difficult. Hence the application of EMPW gets restricted. The present work attempts to make a novel contribution by investigating the effect of process parameters on welding quality of flat plates. The work emphasizes the approaches and engineering calculations required to effectively use of actuator in EMPW of flat components.

Nursing leadership and management effects work environments.

PubMed

Tomey, Ann Marriner

2009-01-01

The aim of this literature search was to identify recent research related to nursing leadership and management effects on work environment using the 14 forces of magnetism. This article gives some historical perspective from the original 1983 American Academy of Nursing study through to the 2002 McClure and Hinshaw update to 2009 publications. Research publications were given a priority for references. The 14 forces of magnetism as identified by Unden and Monarch were: '1. Quality of leadership..., 2. Organizational structure..., 3. Management style..., 4. Personnel policies and programs..., 5. Professional models of care..., 6. Quality of care..., 7 Quality improvement..., 8. Consultation and resources..., 9. Autonomy..., 10. Community and the hospital..., 11. Nurse as teacher..., 12. Image of nursing..., 13. Interdisciplinary relationships... and 14. Professional development....'. Correlations have been found among positive workplace management initiatives, style of transformational leadership and participative management; patient-to-nurse ratios; education levels of nurses; quality of patient care, patient satisfaction, employee health and well-being programmes; nurse satisfaction and retention of nurses; healthy workplace environments and healthy patients and personnel. This article identifies some of the research that provides evidence for evidence-based nursing management and leadership practice.

Keeping America Working Project: Industry Training Inventory, 1986.

ERIC Educational Resources Information Center

Gollattscheck, James; And Others

A survey was conducted of selected two-year colleges to gain an in-depth knowledge about the business/industry training programs provided by these colleges and to quantify the efforts of two-year colleges to improve the quality of the work force and the efficiency of public and private enterprises. Study findings, based on responses from 54 of the…

AQMEII3: the EU and NA regional scale program of the Hemispheric Trasport of Air Pollution Task Force

EPA Science Inventory

The presentation builds on the work presented last year at the 14th CMAS meeting and it is applied to the work performed in the context of the AQMEII-HTAP collaboration. The analysis is conducted within the framework of the third phase of AQMEII (Air Quality Model Evaluation Inte...

Labor-Force Participation, Policies & Practices in an Aging America: Adaptation Essential for a Healthy & Resilient Population.

PubMed

Berkman, Lisa F; Börsch-Supan, Axel; Avendano, Mauricio

2015-01-01

Population aging in the United States poses challenges to societal institutions while simultaneously creating opportunities to build a more resilient, successful, and cohesive society. Work organization and labor-force participation are central to both the opportunities and challenges posed by our aging society. We argue that expectations about old age have not sufficiently adapted to the reality of aging today. Our institutions need more adaptation in order to successfully face the consequences of demographic change. Although this adaptation needs to focus especially on work patterns among the "younger elderly," our society has to change its general attitudes toward work organization and labor-force participation, which will have implications for education and health care. We also show that work's beneficial effects on well-being in older ages are often neglected, while the idea that older workers displace younger workers is a misconception emerging from the "lump of labor" fallacy. We conclude, therefore, that working at older ages can lead to better quality of life for older people and to a more productive and resilient society overall.

Confronting the Quiet Crisis: How Chief State School Officers Are Advancing Quality Early Childhood Opportunities

ERIC Educational Resources Information Center

Council of Chief State School Officers, 2012

2012-01-01

In 2009, the Council of Chief State School Officers (CCSSO) adopted a new policy statement on early childhood education. Based on the work of a task force of 13 chiefs, "A Quiet Crisis: The Urgent Need to Build Early Childhood Systems and Quality Programs for Children Birth to Age Five" presents a compelling argument for why public…

The FEM Simulation on End Mill of Plastic Doors and Windows Corner Cleaning Based on Deform-3D

NASA Astrophysics Data System (ADS)

Li, Guoping; Huang, Zhenyong; Wang, Xiaohui

2017-12-01

In the plastic doors and windows corner cleaning process, the rotating speed, the feed rate and the milling cutter diameter are the main factors that affect the efficiency and quality of the of corner cleaning. In this paper, SolidWorks will be used to establish the 3D model of end mills, and use Deform-3D to research the end mill milling process. And using orthogonal experiment design method to analyze the effect of rotating speed, the feed rate and the milling cutter diameter on the axial force variation, and to get the overall trend of axial force and the selection of various parameters according to the influence of axial force change. Finally, simulate milling experiment used to get the actual axial force data to verify the reliability of the FEM simulation model. And the conclusion obtained in this paper has important theoretical value in improving the plastic doors and windows corner cleaning efficiency and quality.

Morning-evening type and burnout level as factors influencing sleep quality of shift nurses: a questionnaire study

PubMed Central

Demir Zencirci, Ayten; Arslan, Sümeyye

2011-01-01

Aim To assess the relationship between sleep quality and demographic variables, morning-evening type, and burnout in nurses who work shifts. Methods We carried out a cross-sectional self-administered study with forced choice and open-ended structured questionnaires – Pittsburg Sleep Quality Index, Morningness-eveningness Questionnaire, and Maslach Burnout Inventory. The study was carried out at Gazi University Medicine Faculty Hospital of Ankara on 524 invited nurses from July to September 2008, with a response rate of 89.94% (n = 483). Descriptive and inferential statistics were applied to determine the risk factors of poor sleep quality. Results Most socio-demographic variables did not affect sleep quality. Participants with poor sleep quality had quite high burnout levels. Most nurses who belonged to a type that is neither morning nor evening had poor sleep quality. Nurses who experienced an incident worsening their sleep patterns (P < 0.001) and needlestick or sharp object injuries (P = 0.010) in the last month had poor sleep quality. The subjective sleep quality and sleep latency points of evening types within created models for the effect of burnout dimensions were high. Conclusions Nurses working consistently either in the morning or at night had better sleep quality than those working rotating shifts. Further studies are still needed to develop interventions that improve sleep quality and decrease burnout in nurses working shifts. PMID:21853548

Controlled Synthesis of Atomically Layered Hexagonal Boron Nitride via Chemical Vapor Deposition.

PubMed

Liu, Juanjuan; Kutty, R Govindan; Liu, Zheng

2016-11-29

Hexagonal boron nitrite (h-BN) is an attractive material for many applications including electronics as a complement to graphene, anti-oxidation coatings, light emitters, etc. However, the synthesis of high-quality h-BN is still a great challenge. In this work, via controlled chemical vapor deposition, we demonstrate the synthesis of h-BN films with a controlled thickness down to atomic layers. The quality of as-grown h-BN is confirmed by complementary characterizations including high-resolution transition electron microscopy, atomic force microscopy, Raman spectroscopy and X-ray photo-electron spectroscopy. This work will pave the way for production of large-scale and high-quality h-BN and its applications as well.

Switched capacitor charge pump used for low-distortion imaging in atomic force microscope.

PubMed

Zhang, Jie; Zhang, Lian Sheng; Feng, Zhi Hua

2015-01-01

The switched capacitor charge pump (SCCP) is an effective method of linearizing charges on piezoelectric actuators and therefore constitute a significant approach to nano-positioning. In this work, it was for the first time implemented in an atomic force microscope for low-distortion imaging. Experimental results showed that the image quality was improved evidently under the SCCP drive compared with that under traditional linear voltage drive. © Wiley Periodicals, Inc.

Note: A rigid piezo motor with large output force and an effective method to reduce sliding friction force.

PubMed

Guo, Ying; Hou, Yubin; Lu, Qingyou

2014-05-01

We present a completely practical TunaDrive piezo motor. It consists of a central piezo stack sandwiched by two arm piezo stacks and two leg piezo stacks, respectively, which is then sandwiched and spring-clamped by a pair of parallel polished sapphire rods. It works by alternatively fast expanding and contracting the arm/leg stacks while slowly expanding/contracting the central stack simultaneously. The key point is that sufficiently fast expanding and contracting a limb stack can make its two sliding friction forces well cancel, resulting in the total sliding friction force is <10% of the total static friction force, which can help increase output force greatly. The piezo motor's high compactness, precision, and output force make it perfect in building a high-quality harsh-condition (vibration resistant) atomic resolution scanning probe microscope.

Exploring Quality of Life during the Transition from School to Work in Chile

ERIC Educational Resources Information Center

Jeria, Maria

2009-01-01

Data from Chile's national household survey (CASEN) for the years 1990-2003 reveal that the transition process from school to active working life has been postponed over the course of the 13 year period while its duration has steadily increased, resulting in a delayed integration into the labour force. This finding is consistent with experiences…

Process Improvements in Training Device Acceptance Testing: A Study in Total Quality Management

DTIC Science & Technology

1990-12-12

Quality Management , a small group of Government and industry specialists examined the existing training device acceptance test process for potential improvements. The agreed-to mission of the Air Force/Industry partnership was to continuously identify and promote implementable approaches to minimize the cost and time required for acceptance testing while ensuring that validated performance supports the user training requirements. Application of a Total Quality process improvement model focused on the customers and their requirements, analyzed how work was accomplished, and

Regulation of health information processing in an outsourcing environment.

PubMed

2004-06-01

Policy makers must consider the work force, technology, cost, and legal implications of their legislative proposals. AHIMA, AAMT, CHIA, and MTIA urge lawmakers to craft regulatory solutions that enforce HIPAA and support advancements in modern health information processing practices that improve the quality and cost of healthcare. We also urge increased investment in health information work force development and implementation of new technologies to advance critical healthcare outcomes--timely, accurate, accessible, and secure information to support patient care. It is essential that state legislatures reinforce the importance of improving information processing solutions for healthcare and not take actions that will produce unintended and detrimental consequences.

Cluster management.

PubMed

Katz, R

1992-11-01

Cluster management is a management model that fosters decentralization of management, develops leadership potential of staff, and creates ownership of unit-based goals. Unlike shared governance models, there is no formal structure created by committees and it is less threatening for managers. There are two parts to the cluster management model. One is the formation of cluster groups, consisting of all staff and facilitated by a cluster leader. The cluster groups function for communication and problem-solving. The second part of the cluster management model is the creation of task forces. These task forces are designed to work on short-term goals, usually in response to solving one of the unit's goals. Sometimes the task forces are used for quality improvement or system problems. Clusters are groups of not more than five or six staff members, facilitated by a cluster leader. A cluster is made up of individuals who work the same shift. For example, people with job titles who work days would be in a cluster. There would be registered nurses, licensed practical nurses, nursing assistants, and unit clerks in the cluster. The cluster leader is chosen by the manager based on certain criteria and is trained for this specialized role. The concept of cluster management, criteria for choosing leaders, training for leaders, using cluster groups to solve quality improvement issues, and the learning process necessary for manager support are described.

Business Leadership: The Third Wave of Education Reform. Report of the Conference (New York, New York, February 13, 1989). Research Report No. 933.

ERIC Educational Resources Information Center

Ashwell, Andrew, Ed.; Caropreso, Frank, Ed.

The quality of the U.S. work force is directly affected by the quality of its education. Business involvement in a national education agenda should be considered a necessary investment to foster success in international competition. The 1989 meeting of the Conference Board focused on two aspects of business leadership in education: (1) the effect…

Imaging Carbon Nanotubes in High Performance Polymer Composites via Magnetic Force Microscope

NASA Technical Reports Server (NTRS)

Lillehei, Peter T.; Park, Cheol; Rouse, Jason H.; Siochi, Emilie J.; Bushnell, Dennis M. (Technical Monitor)

2002-01-01

Application of carbon nanotubes as reinforcement in structural composites is dependent on the efficient dispersion of the nanotubes in a high performance polymer matrix. The characterization of such dispersion is limited by the lack of available tools to visualize the quality of the matrix/carbon nanotube interaction. The work reported herein demonstrates the use of magnetic force microscopy (MFM) as a promising technique for characterizing the dispersion of nanotubes in a high performance polymer matrix.

Air Force research in human sensory feedback for telepresence

NASA Technical Reports Server (NTRS)

Julian, Ronald G.

1993-01-01

Telepresence operations require high quality information transfer between the human master and the remotely located slave. Present Air Force research focuses on the human aspects of the information needed to complete the control/feedback loop. Work in three key areas of human sensory feedback for manipulation of objects are described. Specific projects in each key area are outlined, including research tools (hardware), planned research, and test results. Nonmanipulative feedback technologies are mentioned to complete the advanced teleoperation discussions.

48 CFR 217.171 - Multiyear contracts for services.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., vehicles, and other highly complex military equipment; (3) Specialized training requiring high-quality instructor skills (e.g., training for pilots and aircrew members or foreign language training); (4) Base... substantial contingent liabilities for the assembly, training, or transportation of a specialized work force...

Labor-Force Participation, Policies & Practices in an Aging America: Adaptation Essential for a Healthy & Resilient Population

PubMed Central

Berkman, Lisa F.; Börsch-Supan, Axel; Avendano, Mauricio

2016-01-01

Population aging in the United States poses challenges to societal institutions while simultaneously creating opportunities to build a more resilient, successful, and cohesive society. Work organization and labor-force participation are central to both the opportunities and challenges posed by our aging society. We argue that expectations about old age have not sufficiently adapted to the reality of aging today. Our institutions need more adaptation in order to successfully face the consequences of demographic change. Although this adaptation needs to focus especially on work patterns among the “younger elderly,” our society has to change its general attitudes toward work organization and labor-force participation, which will have implications for education and health care. We also show that work’s beneficial effects on well-being in older ages are often neglected, while the idea that older workers displace younger workers is a misconception emerging from the “lump of labor” fallacy. We conclude, therefore, that working at older ages can lead to better quality of life for older people and to a more productive and resilient society overall. PMID:28042166

Note: A rigid piezo motor with large output force and an effective method to reduce sliding friction force

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guo, Ying; Lu, Qingyou, E-mail: qxl@ustc.edu.cn; Hefei National Laboratory for Physical Sciences at Microscale, University of Science and Technology of China, Hefei, Anhui 230026

2014-05-15

We present a completely practical TunaDrive piezo motor. It consists of a central piezo stack sandwiched by two arm piezo stacks and two leg piezo stacks, respectively, which is then sandwiched and spring-clamped by a pair of parallel polished sapphire rods. It works by alternatively fast expanding and contracting the arm/leg stacks while slowly expanding/contracting the central stack simultaneously. The key point is that sufficiently fast expanding and contracting a limb stack can make its two sliding friction forces well cancel, resulting in the total sliding friction force is <10% of the total static friction force, which can help increasemore » output force greatly. The piezo motor's high compactness, precision, and output force make it perfect in building a high-quality harsh-condition (vibration resistant) atomic resolution scanning probe microscope.« less

"Time for Results": An Overview.

ERIC Educational Resources Information Center

Alexander, Lamar

1986-01-01

Summarizes the work of seven National Governors' Association task forces (on teaching, leadership, parent involvement and choice, readiness, technology, school facilities, and college quality) and the "action agenda" proposed. The governors' recent report is unique for its authorship, the tough issues tackled, and its follow-up plan.…

Who is Leaving the Federal Government?

DTIC Science & Technology

1989-01-01

quality of worklife , offer alterna- tasks. tive employee benefits, or initiate some other changes The need for more information about Federal turnover in...Federal work force?2 A 1988 General serious personnel imbalances and a diminished ability Auting Offe tdeplitycl for an ngranto serve #he general public

Student Apprenticeship Linkage in Vocational Education.

ERIC Educational Resources Information Center

Alabama State Dept. of Education, Montgomery. Div. of Vocational Education Services.

The Student Apprenticeship Linkage Program bridges skill training programs in secondary schools with high technology apprenticeship training programs in industry. The program returns quality to Alabama's Vocational Education System and meets work force needs of business and industry. The program has eight objectives: demonstrate a model for…

Evaluation of DNA Force Fields in Implicit Solvation

PubMed Central

Gaillard, Thomas; Case, David A.

2011-01-01

DNA structural deformations and dynamics are crucial to its interactions in the cell. Theoretical simulations are essential tools to explore the structure, dynamics, and thermodynamics of biomolecules in a systematic way. Molecular mechanics force fields for DNA have benefited from constant improvements during the last decades. Several studies have evaluated and compared available force fields when the solvent is modeled by explicit molecules. On the other hand, few systematic studies have assessed the quality of duplex DNA models when implicit solvation is employed. The interest of an implicit modeling of the solvent consists in the important gain in the simulation performance and conformational sampling speed. In this study, respective influences of the force field and the implicit solvation model choice on DNA simulation quality are evaluated. To this end, extensive implicit solvent duplex DNA simulations are performed, attempting to reach both conformational and sequence diversity convergence. Structural parameters are extracted from simulations and statistically compared to available experimental and explicit solvation simulation data. Our results quantitatively expose the respective strengths and weaknesses of the different DNA force fields and implicit solvation models studied. This work can lead to the suggestion of improvements to current DNA theoretical models. PMID:22043178

ASCCP Colposcopy Standards: Colposcopy Quality Improvement Recommendations for the United States.

PubMed

Mayeaux, Edward J; Novetsky, Akiva P; Chelmow, David; Garcia, Francisco; Choma, Kim; Liu, Angela H; Papasozomenos, Theognosia; Einstein, Mark H; Massad, L Stewart; Wentzensen, Nicolas; Waxman, Alan G; Conageski, Christine; Khan, Michelle J; Huh, Warner K

2017-10-01

The American Society for Colposcopy and Cervical Pathology (ASCCP) Colposcopy Standards recommendations address the role of and approach to colposcopy and biopsy for cervical cancer prevention in the United States. The recommendations were developed by an expert working group appointed by ASCCP's Board of Directors. The ASCCP Quality Improvement Working Group developed evidence-based guidelines to promote best practices and reduce errors in colposcopy and recommended indicators to measure colposcopy quality. The working group performed a systematic review of existing major society and national guidelines and quality indicators. An initial list of potential quality indicators was developed and refined through successive iterative discussions, and draft quality indicators were proposed. The draft recommendations were then reviewed and commented on by the entire Colposcopy Standards Committee, posted online for public comment, and presented at the International Federation for Cervical Pathology and Colposcopy 2017 World Congress for further comment. All comments were considered, additional adjustments made, and the final recommendations approved by the entire Task Force. Eleven quality indicators were selected spanning documentation, biopsy protocols, and time intervals between index screening tests and completion of diagnostic evaluation. The proposed quality indicators are intended to serve as a starting point for quality improvement in colposcopy at a time when colposcopy volume is decreasing and individual procedures are becoming technically more difficult to perform.

Environmental Assessment for the Construction of the United States Air Force Technical Application Center (AFTAC) on Patrick Air Force Base, Florida

DTIC Science & Technology

2009-12-01

GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S...AND ADDRESS(ES) 45 Civil Engineer Squadron (45 CES/CEVP),1224 Jupiter Street,Patrick AFB,FL,32925 8. PERFORMING ORGANIZATION REPORT NUMBER 9...Quality Requirements Law or Rule Permit/Action(s) Requirement Agency or Organization AFI 32-7086, Chapter 4 Minimize loss and conduct recovery

The Role of the Founder in the Creation of Organizational Culture.

DTIC Science & Technology

1983-01-01

090S 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK AREA G WORK UNIT NUMBERS Sloan School of Management Massachusetts...founders were obsessed with product quality and had a hard time seeing how some of their own managerial demands could undermine quality by forcing... employees , but these employees will, as they move up in the organization and become experienced managers , develop a range of new assumptions which

The effect of ill health and socioeconomic status on labor force exit and re-employment: a prospective study with ten years follow-up in the Netherlands.

PubMed

Schuring, Merel; Robroek, Suzan J W; Otten, Ferdy W J; Arts, Coos H; Burdorf, Alex

2013-03-01

The aim of this study was to investigate the effect of ill health and socioeconomic status on labor force exit due to unemployment, early retirement, disability pension, or becoming economically inactive. A secondary objective was to investigate the effect of ill health and socioeconomic status on return to work. A representative sample of the Dutch working population (N=15 152) was selected for a prospective study with ten years follow-up (93 917 person-years). Perceived health and individual and household characteristics were measured at baseline with the Permanent Quality of Life Survey (POLS) during 1999-2002. Statistics Netherlands ascertained employment status monthly from January 1999 to December 2008. Cox proportional hazards analyses were used to determine the factors that predicted labor force exit and return to work. Ill health increased the likelihood of labor force exit into unemployment [hazard ratio (HR) 1.89], disability pension (HR 6.39), and early retirement (HR 1.20), but was not a determinant of becoming economically inactive (HR 1.07). Workers with low socioeconomic status were, even after adjusting for ill health, more likely to leave the labor force due to unemployment, disability pension, and economic inactivity. Workers with ill health at baseline were less likely to return to work after unemployment (HR 0.75) or disability pension (HR 0.62). Socioeconomic status did not influence re-employment. Ill health is an important determinant for entering and maintaining paid employment. Workers with lower education were at increased risk for health-based selection out of paid employment. Policies to improve labor force participation, especially among low socioeconomic level workers, should protect workers with health problems against exclusion from the labor force.

In-Process Atomic-Force Microscopy (AFM) Based Inspection

PubMed Central

Mekid, Samir

2017-01-01

A new in-process atomic-force microscopy (AFM) based inspection is presented for nanolithography to compensate for any deviation such as instantaneous degradation of the lithography probe tip. Traditional method used the AFM probes for lithography work and retract to inspect the obtained feature but this practice degrades the probe tip shape and hence, affects the measurement quality. This paper suggests a second dedicated lithography probe that is positioned back-to-back to the AFM probe under two synchronized controllers to correct any deviation in the process compared to specifications. This method shows that the quality improvement of the nanomachining, in progress probe tip wear, and better understanding of nanomachining. The system is hosted in a recently developed nanomanipulator for educational and research purposes. PMID:28561747

Amended annual report for Brookhaven National Laboratory: Epidemiologic surveillance - 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Epidemiologic surveillance at DOE facilities consists of regular and systematic collection, analysis, and interpretation of data on absences due to illness and injury in the work force. Its purpose is to provide an early warning system for health problems occurring among employees at participating sites. Data are collected by coordinators at each site and submitted to the Epidemiologic Surveillance Data Center, located at the Oak Ridge Institute for Science and Education, where quality control procedures and analyses are carried out. Rates of absences and rates of diagnoses associated with absences are analyzed by occupation and other relevant variables. They maymore » be compared with the disease experience of different groups within the DOE work force and with populations and do not work for DOE to identify disease patterns or clusters that may be associated work activities. This report provides a final summary for BNL.« less

Annual report for Hanford Site: Epidemiologic surveillance - 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-01-01

Epidemiologic surveillance at U.S. Department of Energy (DOE) facilities consists of regular and systematic collection, analysis, and interpretation of data on absences due to illness and injury in the work force. Its purpose is to provide an early warning system for health problems occurring among employees at participating sites. Data are collected by coordinators at each site and submitted to the Epidemiologic Surveillance Data Center, located at the Oak Ridge Institute for Science and Education, where quality control procedures and analyses are carried out. Rates of absences and rates of diagnoses associated with absences are analyzed by occupational and othermore » relevant variables. They may be compared with the disease experience of different groups within the DOE work force and with populations that do not work for DOE to identify disease patterns or clusters that may be associated with work activities.This report provides the final summary for the Hanford Reservation.« less

Epidemiologic surveillance. Annual report for EG&G Rocky Flats

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-12-31

Epidemiologic surveillance at U.S. Department of Energy (DOE) facilities consists of regular and systematic collection, analysis, and interpretation of data on absences resulting from illness and injury in the work force. Its purpose is to provide an early warning system for health problems occurring among employees at participating sites. Data are collected by coordinators at each site and submitted to the Epidemiologic Surveillance Data Center, located at the Oak Ridge Institute for Science and Education, where quality control procedures and analyses are carried out. Rates of absences and rates of diagnoses associated with absences are analyzed by occupation and othermore » relevant variables. They may be compared with the disease experience of different groups within the DOE work force and with populations that do not work for DOE to identify disease patterns or clusters that may be associated with work activities. This report presents the 1994 morbidity data for the Rocky Flats plant.« less

The Combined Effect of Sleep Duration and Quality on Mental Health Among Republic of Korea Armed Forces.

PubMed

Kim, Tae Kyung; Lee, Hee-Choon; Lee, Sang Gyu; Han, Kyu-Tae; Park, Eun-Cheol

2016-11-01

Sleep problems in the Republic of Korea Armed Forces have increased. This study analyzed the mental health impact of sleep duration and quality on personnel of the Republic of Korea Armed Forces. Data from the 2014 Military Health Survey were used. Degree of sleep duration and quality were measured by this self-reported questionnaire. Analysis of variance was carried out to compare Kessler Psychological Distress Scale 10 (K10) scores. Multiple logistic regression analysis identified associations between sleep duration, quality, and K10 scores. Among the personnel studied, 2.5% reported severe sleep difficulties. The average sleep duration was 6.83 ± 1.12 hours. Short sleep duration and sleep difficulty were associated with poorer K10 scores. Higher K10 scores among individuals with short sleep duration and low sleep quality were identified in the isolated military area group, the over 53 working hours/week group, and the enlisted soldier group. The factors listed were not by themselves associated with poorer mental health scores. Rather, specific workplaces and specific rank groups were more prone to poorer mental health. These results provide helpful information to minimize the negative psychological effects of sleep factors and to promote a sleep problem prevention and management policy. Reprint & Copyright © 2016 Association of Military Surgeons of the U.S.

A standards-based approach to quality improvement for HIV services at Zambia Defence Force facilities: results and lessons learned.

PubMed

Kols, Adrienne; Kim, Young-Mi; Bazant, Eva; Necochea, Edgar; Banda, Joseph; Stender, Stacie

2015-07-01

The Zambia Defence Force adopted the Standards-Based Management and Recognition approach to improve the quality of the HIV-related services at its health facilities. This quality improvement intervention relies on comprehensive, detailed assessment tools to communicate and verify adherence to national standards of care, and to test and implement changes to improve performance. A quasi-experimental evaluation of the intervention was conducted at eight Zambia Defence Force primary health facilities (four facilities implemented the intervention and four did not). Data from three previous analyses are combined to assess the effect of Standards-Based Management and Recognition on three domains: facility readiness to provide services; observed provider performance during antiretroviral therapy (ART) and antenatal care consultations; and provider perceptions of the work environment. Facility readiness scores for ART improved on four of the eight standards at intervention sites, and one standard at comparison sites. Facility readiness scores for prevention of mother-to-child transmission (PMTCT) of HIV increased by 15 percentage points at intervention sites and 7 percentage points at comparison sites. Provider performance improved significantly at intervention sites for both ART services (from 58 to 84%; P < 0.01) and PMTCT services (from 58 to 73%; P = 0.003); there was no significant change at comparison sites. Providers' perceptions of the work environment generally improved at intervention sites and declined at comparison sites; differences in trends between study groups were significant for eight items. A standards-based approach to quality improvement proved effective in supporting healthcare managers and providers to deliver ART and PMTCT services in accordance with evidence-based standards in a health system suffering from staff shortages.

Better Particle Accelerators with SRF Technology

ScienceCinema

Padamsee, Hasan; Martinello, Martina; Ross, Marc; Peskin, Michael; Yamamoto, Akira

2018-01-16

The use of superconducting radio frequency (SRF) technology is a driving force in the development of particle accelerators. Scientists from around the globe are working together to develop the newest materials and techniques to improve the quality and efficiency of the SRF cavities that are essential for this technology.

Better Particle Accelerators with SRF Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Padamsee, Hasan; Martinello, Martina; Ross, Marc

2017-02-20

The use of superconducting radio frequency (SRF) technology is a driving force in the development of particle accelerators. Scientists from around the globe are working together to develop the newest materials and techniques to improve the quality and efficiency of the SRF cavities that are essential for this technology.

Multivariate volumetric specifications and dynamic modulus as a quality measure for asphalt concrete materials.

DOT National Transportation Integrated Search

2010-06-01

The Virginia Department of Transportation (VDOT) has worked toward end-result specifications (ERSs) in asphalt concrete since the mid-1960s. As stated by Hughes et al. (2007), true ERSs can lead to a reduction in VDOT's overall inspection force resul...

US Air Force perspective on validated NDE - Past, present, and future

NASA Astrophysics Data System (ADS)

Lindgren, Eric A.

2016-02-01

The concept of inspection has accompanied aviation since the work of the Wright Brothers. Inspection for both initial quality/materials acceptance and readiness for flight have been coupled with US Air Force (USAF) since its inception as the US Army Signal Corps. Initial nondestructive evaluation work expanded beyond visual inspection to include radiography and magnetic particle in the 1920's and 1930's as air frames transitioned to metal and engines used higher strength steels. Within the USAF Research and Development community, a Nondestructive Test Section was stood up in 1952 and the Nondestructive Evaluation Branch (NDE) was established in 1974. In 2012 the name was changed to the Materials State Awareness Branch. This name change reflects the evolution from a primary focus on inspections for damage and defects in materials to the characterization of the underlying materials structure that governs properties of the materials of interest for Air Force applications.

2015 International PV Quality Assurance Task Force (PVQAT) Workshop |

Science.gov Websites

Photovoltaic Research | NREL International PV Quality Assurance Task Force (PVQAT) Workshop 2015 International PV Quality Assurance Task Force (PVQAT) Workshop Wednesday, February 25, 2015 Chairs : Tony Sample and Masaaki Yamamichi The 2015 International PV Quality Assurance Task Force (PVQAT

The Forces That Shape the Work of Community College Counselors

ERIC Educational Resources Information Center

Ryan, Edward Francis

2011-01-01

Concerns exist about the quality of counseling within community colleges. Some counselors lower student aspirations and are inaccessible, uninformed, or discouraging. Evidence also suggests that ineffective counseling might be explained by role conflict. Although role conflict should not be used as an excuse to justify poor performance, it may…

AQMEII Phase 3 in the context of HTAP2: Scope, Objectives and Findings

EPA Science Inventory

This presentation provides an overview of the third phase of the Air Quality Model Evaluation International Initiative (AQMEII) and its coordination with the work under the task force on Hemispheric Transport of Air Pollution (HTAP). It also provides a number of examples of analy...

Education Reform in England: Quality and Equity in the Performative School

ERIC Educational Resources Information Center

Wilkins, Chris

2015-01-01

This article argues that contradictory forces affect teachers' work in the neo-liberal school system in England, with a diversity of governance models alongside increasingly dominant orthodoxies of what constitutes 'effective practice and leadership'. School reforms in England have focused on increasing overall attainment and on closing the…

48 CFR 736.602-3 - Evaluation board functions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... industry with respect to such factors as control of costs, quality of work, and ability to meet schedules, to the extent such information is available; (4) Ability to assign an adequate number of qualified... architect-engineer is able to perform with its own forces when required; (6) Ability of the architect...

48 CFR 736.602-3 - Evaluation board functions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... industry with respect to such factors as control of costs, quality of work, and ability to meet schedules, to the extent such information is available; (4) Ability to assign an adequate number of qualified... architect-engineer is able to perform with its own forces when required; (6) Ability of the architect...

48 CFR 736.602-3 - Evaluation board functions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... industry with respect to such factors as control of costs, quality of work, and ability to meet schedules, to the extent such information is available; (4) Ability to assign an adequate number of qualified... architect-engineer is able to perform with its own forces when required; (6) Ability of the architect...

On-Site Construction Productivity Improvement Through Total Quality Management

DTIC Science & Technology

1991-12-01

morale of the work force. i Kaoru Ishikawa , Guide to Ouality Control, (2d ed; New York: Asian Productivity Organization, 1982), p. 45. ’"Ibid. 34...Curve Kaoru Ishikawa , Guide to Quality Control, (2d ed; New York: Asian Productivity Organization, 1982), p. 62. 54 For any normal distribution, 99.73...KAIZEN The Key to Japan’s Comoetitive Success. New York: Random House Business Division, 1986. Ishikawa , Kaoru , Guide to Ouality Control. 2d ed; New

A model of involvement in work-related learning and development activity: the effects of individual, situational, motivational, and age variables.

PubMed

Maurer, Todd J; Weiss, Elizabeth M; Barbeite, Francisco G

2003-08-01

Eight hundred employees from across the U.S. work force participated in a detailed 13-month longitudinal study of involvement in learning and development activities. A new model was posited and tested in which the hypothesized sequence was as follows: worker age --> individual and situational antecedents --> perceived benefits of participation and self-efficacy for development --> attitudes toward development --> intentions to participate --> participation. The results depict a person who is oriented toward employee development as having participated in development activities before, perceiving themselves as possessing qualities needed for learning, having social support for development at work and outside of work, being job involved, having insight into his or her career, and believing in the need for development, in his or her ability to develop skills and to receive intrinsic benefits from participating. Given the aging work force, a detailed treatment of age differences in development is presented. Implications for new ideas in practice and future research are discussed.

Development and Performance Evaluation of Image-Based Robotic Waxing System for Detailing Automobiles

PubMed Central

Hsu, Bing-Cheng

2018-01-01

Waxing is an important aspect of automobile detailing, aimed at protecting the finish of the car and preventing rust. At present, this delicate work is conducted manually due to the need for iterative adjustments to achieve acceptable quality. This paper presents a robotic waxing system in which surface images are used to evaluate the quality of the finish. An RGB-D camera is used to build a point cloud that details the sheet metal components to enable path planning for a robot manipulator. The robot is equipped with a multi-axis force sensor to measure and control the forces involved in the application and buffing of wax. Images of sheet metal components that were waxed by experienced car detailers were analyzed using image processing algorithms. A Gaussian distribution function and its parameterized values were obtained from the images for use as a performance criterion in evaluating the quality of surfaces prepared by the robotic waxing system. Waxing force and dwell time were optimized using a mathematical model based on the image-based criterion used to measure waxing performance. Experimental results demonstrate the feasibility of the proposed robotic waxing system and image-based performance evaluation scheme. PMID:29757940

Development and Performance Evaluation of Image-Based Robotic Waxing System for Detailing Automobiles.

PubMed

Lin, Chi-Ying; Hsu, Bing-Cheng

2018-05-14

Waxing is an important aspect of automobile detailing, aimed at protecting the finish of the car and preventing rust. At present, this delicate work is conducted manually due to the need for iterative adjustments to achieve acceptable quality. This paper presents a robotic waxing system in which surface images are used to evaluate the quality of the finish. An RGB-D camera is used to build a point cloud that details the sheet metal components to enable path planning for a robot manipulator. The robot is equipped with a multi-axis force sensor to measure and control the forces involved in the application and buffing of wax. Images of sheet metal components that were waxed by experienced car detailers were analyzed using image processing algorithms. A Gaussian distribution function and its parameterized values were obtained from the images for use as a performance criterion in evaluating the quality of surfaces prepared by the robotic waxing system. Waxing force and dwell time were optimized using a mathematical model based on the image-based criterion used to measure waxing performance. Experimental results demonstrate the feasibility of the proposed robotic waxing system and image-based performance evaluation scheme.

Annual report for Brookhaven National Laboratory 1994 epidemiologic surveillance

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-01-01

Epidemiologic surveillance at DOE facilities consists of regular and systematic collection, analysis, and interpretation of data on absences due to illness and injury in the work force. Its purpose is to provide an early warning system for health problems occurring among employees at participating sites. Data are collected by coordinators at each site and submitted to the Epidemiologic Surveillance Data Center, located at the Oak Ridge Institute for Science and Education, where quality control procedures and analyses are carried out. Rates of absences and rates of diagnoses associated with absences are analyzed by occupation and other relevant variables. They maymore » be compared with the disease experience of different groups within the DOE work force and with populations that do not work for DOE to identify disease patterns or clusters that may be associated with work activities. In this annual report, the 1994 morbidity data for BNL are summarized. These analyses focus on absences of 5 or more consecutive workdays occurring among workers aged 16-80 years. They are arranged in five sets of tables that present: (1) the distribution of the labor force by occupational category and salary status; (2) the absences per person, diagnoses per absence, and diagnosis rates for the whole work force; (3) diagnosis rates by type of disease or injury; (4) diagnosis rates by occupational category; and (5) relative risks for specific types of disease or injury by occupational category.« less

Optimizing Protein-Protein van der Waals Interactions for the AMBER ff9x/ff12 Force Field.

PubMed

Chapman, Dail E; Steck, Jonathan K; Nerenberg, Paul S

2014-01-14

The quality of molecular dynamics (MD) simulations relies heavily on the accuracy of the underlying force field. In recent years, considerable effort has been put into developing more accurate dihedral angle potentials for MD force fields, but relatively little work has focused on the nonbonded parameters, many of which are two decades old. In this work, we assess the accuracy of protein-protein van der Waals interactions in the AMBER ff9x/ff12 force field. Across a test set of 44 neat organic liquids containing the moieties present in proteins, we find root-mean-square (RMS) errors of 1.26 kcal/mol in enthalpy of vaporization and 0.36 g/cm(3) in liquid densities. We then optimize the van der Waals radii and well depths for all of the relevant atom types using these observables, which lowers the RMS errors in enthalpy of vaporization and liquid density of our validation set to 0.59 kcal/mol (53% reduction) and 0.019 g/cm(3) (46% reduction), respectively. Limitations in our parameter optimization were evident for certain atom types, however, and we discuss the implications of these observations for future force field development.

Reversing into Meritocracy: Shifting the Culture of Physics

NASA Astrophysics Data System (ADS)

Bertschinger, Edmund

Culture is the dark energy of our lives: it is an invisible force that shapes our environment for work and life. Physics culture often includes the assumption that people have equal access to resources and opportunities regardless of gender, race, or any other demographic characteristic. Numerous studies show this is false, yet the invisible force of meritocracy shapes many departments, and its passive acceptance can foster inequitable working environments. Department chairs and other leaders play a key role in shifting institutional culture to leverage the power of diversity, improve student and employee success, and enhance the quality of life for everyone. I will describe steps taken at MIT to shift our cultural direction so that we are not driving in reverse on the highway of meritocracy.

[Health problems of working-age population in the Russian Federation].

PubMed

Izmerov, N F; Tikhonova, G I

2010-01-01

The paper deals with health problems of working-age population in the Russian Federation. According to foreign and domestic experts reduction of the able-bodied population and its fraction in the general population will be accompanied by ageing of labour force in the nearest two decades. Despite the growth of life expectancy in 2006-2007 demonstrated by disability, mortality and life expectancy indices for the age group of interest, its health status is considered to be critical. Mathematical simulation of mortality rates allowed for the assessment of potential years of life lost (PYLL) from leading causes of death among active working population. The data obtained provide a basis for the elaboration of medical and social programs aimed at increasing life expectancy. The most essential role in current negative tendencies in the health of active working population belongs to the deterioration of work conditions and safety at industrial enterprises coupled to low efficiency of occupational health prevention system accounting for the significantly reduced accessibility of health services. Restoration of occupational health system in Russia is of crucial importance. Experts of the Institute of Occupational Health have elaborated a draft National Action Plan designed to improve health protection of labour force in this country; its implementation would help to solve demographic problems and increase the amount and quality of labour force.

Inequalities in the psychological well-being of employed, single and partnered mothers: the role of psychosocial work quality and work-family conflict

PubMed Central

2010-01-01

Background A large body of international research reveals that single mothers experience poorer mental health than their partnered counterparts, with socioeconomic disadvantage identified as an important contributory factor in understanding this health disparity. Much less research, however, has focused specifically on the psychological well-being of single mothers who are employed, despite their growing presence in the labor force. Of the research which has considered employment, the focus has been on employment status per se rather than on other important work-related factors which may impact psychological health, such as psychosocial work quality and work-family conflict. The aim of this study was to: (1) compare employed single mothers and employed partnered mothers on measures of psychological distress, psychosocial work quality and work-family conflict; and (2) explore the potential role of work-family conflict and psychosocial work quality as explanations for any observed differences in psychological distress based on partner status. Method Analysis of data obtained from a cross-sectional telephone survey of employed parents in a mid-sized Western Canadian city. Analyses were based on 674 employed mothers (438 partnered and 236 single), who were 25-50 years old, with at least one child in the household. Results Compared to employed single mothers, employed partnered mothers were older, had more education and reported fewer hours of paid work. Single mothers reported higher levels of psychological distress, financial hardship, work-family conflict and poor psychosocial work quality. Statistical adjustment for income adequacy, psychosocial work quality and work-family conflict each independently resulted in single motherhood no longer being associated with psychological distress. Conclusions While single employed mothers did experience higher levels of psychological distress than their partnered counterparts, differences between these groups of women in income adequacy, psychosocial work quality, and work-family conflict were found to explain this relationship. Future research employing a longitudinal design and subject to lower selection biases is required to tease out the interrelationship of these three life strains and to point to the most appropriate economic and social policies to support single mothers in the workforce. PMID:20175914

Effective Schools: Teacher Hiring, Assignment, Development, and Retention. NBER Working Paper No. 17177

ERIC Educational Resources Information Center

Loeb, Susanna; Kalogrides, Demetra; Beteille, Tara

2011-01-01

The literature on effective schools emphasizes the importance of a quality teaching force in improving educational outcomes for students. In this paper, we use value-added methods to examine the relationship between a school's effectiveness and the recruitment, assignment, development and retention of its teachers. We ask whether effective schools…

DefenseLink Feature: Travels with Gates

Science.gov Websites

who return from combat with post traumatic stress syndrome. FORT BLISS, Texas, May 1, 2008 - The Defense Department is working to reduce stress on the force and improve quality of life for the troops stress will no longer be seen as an obstacle to getting a government security clearance, Defense

Challenges and Opportunities in Adult Education.

ERIC Educational Resources Information Center

Brand, Betsy

Literacy and work force preparedness are two of the most important issues facing education today. Findings of nationwide studies show that reading and writing performance of students is inadequate. One of every eight current workers reads at the fourth-grade level or lower. The nation's economic future will be determined by the quality and…

Bedford County Employer Needs Assessment.

ERIC Educational Resources Information Center

Rephann, Terance J.

In the summer of 1995, 371 establishments in Bedford County, Pennsylvania, were surveyed regarding their opinions of the quality of the local work force. The purpose of the study was to provide evaluation data for planning and curriculum development at the secondary and post-secondary school levels. Forty-three percent of the employers responded.…

Emergency Medical Operations at Kennedy Space Center in Support of Space Shuttle

NASA Technical Reports Server (NTRS)

Myers, K. Jeffrey; Tipton, David A.; Woodard, Daniel; Long, Irene D.

1992-01-01

The unique environment of the Kennedy Space Center includes a wide variety of industrial processes culminating in launch and spaceflight. Many are potentially hazardous to the work force and the astronauts. Technology, planning, training, and quality control are utilized to prevent contingencies and expedite response should a contingency occur.

Discovering the Possibilities of Career Counseling in Business and Industry.

ERIC Educational Resources Information Center

McCharen, Belinda

The changing nature of the workplace is increasing recognition of the fact that employee career development is a lifelong process essential to the achievement and maintenance of a high-quality, competitive work force. Offering employees the opportunity to participate in growth and development programs that include career counseling, assessment,…

The School and Business Alliance Blooms in Yonkers.

ERIC Educational Resources Information Center

Enterprise and Education, 1987

1987-01-01

Participants in the New York State School and Business Alliance program, which is designed to strengthen the partnership among public schools, the private sector, communities, and government are working to improve secondary education as well as the quality of the youth labor force. The Alliance Development Committee (ADC) of Yonkers, New York…

Emergency medical operations at Kennedy Space Center in support of space shuttle

NASA Technical Reports Server (NTRS)

Myers, K. J.; Tipton, D. A.; Woodard, D.; Long, I. D.

1992-01-01

The unique environment of the Kennedy Space Center includes a wide variety of industrial processes culminating in launch and spaceflight. Many are potentially hazardous to the work force and the astronauts. Technology, planning, training, and quality control are utilized to prevent contingencies and expedite response should a contingency occur.

Investigation of holder pressure and size effects in micro deep drawing of rectangular work pieces driven by piezoelectric actuator.

PubMed

Aminzahed, Iman; Mashhadi, Mahmoud Mosavi; Sereshk, Mohammad Reza Vaziri

2017-02-01

Micro forming is a manufacturing process to fabricate micro parts with high quality and a cost effective manner. Deep drawing could be a favorable method for production of complicated parts in macro and micro sizes. In this paper piezoelectric actuator is used as a novel approach in the field of micro manufacturing. Also, in current work, investigations are conducted with four rectangular punches and blanks with various thicknesses. Blank holder pressure effects on thickness distributions, punch force, and springback are studied. According to the results of this work, increasing of blank holder pressure in scaled deep drawing, in contrast to thickness of drawn part, leads to decrease in the punch forces and springback. Furthermore, it is shown that in micro deep drawing, the effects of holder pressure on mentioned parameters can be ignored. Copyright © 2016 Elsevier B.V. All rights reserved.

[The global harmonization task force : successes and challenges].

PubMed

Rotter, R G

2009-06-01

With the move towards globalized international commerce and trade, a call for harmonization of medical device regulatory requirements and practices has evolved. The purpose of the Global Harmonization Task Force (GHTF) is to encourage convergence of regulatory requirements and practices at a global level through consensus to achieve four principle goals: promote safety, quality and performance/effectiveness of medical devices; encourage technological innovation; foster international trade; and serve as a forum of information exchange - all in the interests of protecting and promoting public health. The GHTF is governed by a Steering Committee, and the principle development of the GHTF regulatory model has been, and continues to be, done through five working groups known as Study Groups and supplemented recently by the creation of several Ad Hoc Working Groups. Since its creation in 1992, the members of the GHTF have worked collaboratively to develop what is now ready to be called a global model for the regulation of medical devices.

An R package for simulating growth and organic wastage in aquaculture farms in response to environmental conditions and husbandry practices

PubMed Central

Baldan, Damiano; Porporato, Erika Maria Diletta; Pastres, Roberto

2018-01-01

A new R software package, RAC, is presented. RAC allows to simulate the rearing cycle of 4 species, finfish and shellfish, highly important in terms of production in the Mediterranean Sea. The package works both at the scale of the individual and of the farmed population. Mathematical models included in RAC were all validated in previous works, and account for growth and metabolism, based on input data characterizing the forcing functions—water temperature, and food quality/quantity. The package provides a demo dataset of forcings for each species, as well as a typical set of husbandry parameters for Mediterranean conditions. The present work illustrates RAC main features, and its current capabilities/limitations. Three test cases are presented as a proof of concept of RAC applicability, and to demonstrate its potential for integrating different open products nowadays provided by remote sensing and operational oceanography. PMID:29723208

77 FR 1913 - Notice of Meeting of the Agricultural Air Quality Task Force

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-12

... Conservation Service Notice of Meeting of the Agricultural Air Quality Task Force AGENCY: Natural Resources...), Agricultural Air Quality Task Force (AAQTF) will meet to continue discussions on critical air quality issues... relationship between agricultural production and air quality. The meeting is open to the public, and a draft...

Report of the Defense Science Board Task Force on Quality of Life.

DTIC Science & Technology

1995-10-15

The Quality of Life Task Force is deeply grateful to those distinguished Americans who served as Counselors to the Task Force. Although they did not... Quality of Life issues to the readiness and well being of our Armed Forces. Their willingness to offer suggestions and advice on topics within their...respective expertise was most helpful The recommendations of the Report are those of the Quality of Life Task Force; and Counselors may, or may not, concur in whole or in part with them.

Epidemiology of Substance Use among Forced Migrants: A Global Systematic Review.

PubMed

Horyniak, Danielle; Melo, Jason S; Farrell, Risa M; Ojeda, Victoria D; Strathdee, Steffanie A

2016-01-01

Forced migration is occurring at unprecedented levels. Forced migrants may be at risk for substance use for reasons including coping with traumatic experiences, co-morbid mental health disorders, acculturation challenges and social and economic inequality. This paper aimed to systematically review the literature examining substance use among forced migrants, and identify priority areas for intervention and future research. Seven medical, allied health and social science databases were searched from inception to September 2015 in accordance with PRISMA guidelines to identify original peer-reviewed articles describing any findings relating to alcohol and/or illicit drug use among refugees, internally displaced people (IDPs), asylum seekers, people displaced by disasters and deportees. A descriptive synthesis of evidence from quantitative studies was conducted, focusing primarily on studies which used validated measures of substance use. Synthesis of evidence from qualitative studies focused on identifying prominent themes relating to the contexts and consequences of substance use. Critical Appraisal Skills Programme (CASP) checklists were used to assess methodological quality of included studies. Forty-four quantitative (82% cross-sectional), 16 qualitative and three mixed-methods studies were included. Ten studies were rated as high methodological quality (16%), 39 as moderate quality (62%) and 14 as low quality (22%). The majority of research was conducted among refugees, IDPs and asylum seekers (n = 55, 87%), predominantly in high-income settings. The highest-quality prevalence estimates of hazardous/harmful alcohol use ranged from 17%-36% in camp settings and 4%-7% in community settings. Few studies collected validated measures of illicit drug use. Seven studies compared substance use among forced migrants to other migrant or native-born samples. Among eight studies which conducted multivariable analysis, male sex, trauma exposure and symptoms of mental illness were commonly identified correlates of substance use. Our understanding of substance use among forced migrants remains limited, particularly regarding persons displaced due to disasters, development and deportation. Despite a growing body of work among refugee-background populations, few studies include refugees in low and middle-income countries, where over 80% of the global refugee population resides. Findings suggest a need to integrate substance use prevention and treatment into services offered to forced migrants, particularly in camp settings. Efforts to develop and evaluate interventions to reduce substance use and related harms are needed.

Epidemiology of Substance Use among Forced Migrants: A Global Systematic Review

PubMed Central

Horyniak, Danielle; Melo, Jason S.; Farrell, Risa M.; Ojeda, Victoria D.; Strathdee, Steffanie A.

2016-01-01

Introduction Forced migration is occurring at unprecedented levels. Forced migrants may be at risk for substance use for reasons including coping with traumatic experiences, co-morbid mental health disorders, acculturation challenges and social and economic inequality. This paper aimed to systematically review the literature examining substance use among forced migrants, and identify priority areas for intervention and future research. Methods Seven medical, allied health and social science databases were searched from inception to September 2015 in accordance with PRISMA guidelines to identify original peer-reviewed articles describing any findings relating to alcohol and/or illicit drug use among refugees, internally displaced people (IDPs), asylum seekers, people displaced by disasters and deportees. A descriptive synthesis of evidence from quantitative studies was conducted, focusing primarily on studies which used validated measures of substance use. Synthesis of evidence from qualitative studies focused on identifying prominent themes relating to the contexts and consequences of substance use. Critical Appraisal Skills Programme (CASP) checklists were used to assess methodological quality of included studies. Results Forty-four quantitative (82% cross-sectional), 16 qualitative and three mixed-methods studies were included. Ten studies were rated as high methodological quality (16%), 39 as moderate quality (62%) and 14 as low quality (22%). The majority of research was conducted among refugees, IDPs and asylum seekers (n = 55, 87%), predominantly in high-income settings. The highest-quality prevalence estimates of hazardous/harmful alcohol use ranged from 17%-36% in camp settings and 4%-7% in community settings. Few studies collected validated measures of illicit drug use. Seven studies compared substance use among forced migrants to other migrant or native-born samples. Among eight studies which conducted multivariable analysis, male sex, trauma exposure and symptoms of mental illness were commonly identified correlates of substance use. Conclusion Our understanding of substance use among forced migrants remains limited, particularly regarding persons displaced due to disasters, development and deportation. Despite a growing body of work among refugee-background populations, few studies include refugees in low and middle-income countries, where over 80% of the global refugee population resides. Findings suggest a need to integrate substance use prevention and treatment into services offered to forced migrants, particularly in camp settings. Efforts to develop and evaluate interventions to reduce substance use and related harms are needed. PMID:27411086

77 FR 41165 - Notice of Meeting of the Agricultural Air Quality Task Force

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-12

... Agricultural Air Quality Task Force AGENCY: Natural Resources Conservation Service, USDA. ACTION: Notice of meeting. SUMMARY: The Department of Agriculture (USDA), Agricultural Air Quality Task Force (AAQTF) will.../Concerns Discussion Continued discussion of goals for Task Force Anaerobic Digester Technologies Odor...

Rotorcraft handling-qualities design criteria development

NASA Technical Reports Server (NTRS)

Aiken, Edwin W.; Lebacqz, J. Victor; Chen, Robert T. N.; Key, David L.

1988-01-01

Joint NASA/Army efforts at the Ames Research Center to develop rotorcraft handling-qualities design criteria began in earnest in 1975. Notable results were the UH-1H VSTOLAND variable stability helicopter, the VFA-2 camera-and-terrain-board simulator visual system, and the generic helicopter real-time mathematical model, ARMCOP. An initial series of handling-qualities studies was conducted to assess the effects of rotor design parameters, interaxis coupling, and various levels of stability and control augmentation. The ability to conduct in-flight handling-qualities research was enhanced by the development of the NASA/Army CH-47 variable-stability helicopter. Research programs conducted using this vehicle include vertical-response investigations, hover augmentation systems, and the effects of control-force characteristics. The handling-qualities data base was judged to be sufficient to allow an update of the military helicopter handling-qualities specification, MIL-H-8501. These efforts, including not only the in-house experimental work but also contracted research and collaborative programs performed under the auspices of various international agreements. The report concludes by reviewing the topics that are currently most in need of work, and the plans for addressing these topics.

78 FR 10127 - Request for Nominations to the Agricultural Air Quality Task Force

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-13

... Conservation Service Request for Nominations to the Agricultural Air Quality Task Force AGENCY: Natural... Nominations to the Agricultural Air Quality Task Force. SUMMARY: The Secretary of Agriculture invites... Force (AAQTF) which was established by the Federal Agriculture Improvement and Reform Act of 1996 to...

Epidemiologic surveillance. [1994] amended annual report for Brookhaven National Laboratory. Revision 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-12-31

Epidemiologic surveillance at DOE facilities consists of regular and systematic collection, analysis, and interpretation of data on absences due to illness and injury in the work force. Its purpose is to provide an early warning system for health problems occurring among employees at participating sites. Data are collected by coordinators at each site and submitted to the Epidemiologic Surveillance Data Center, located at the Oak Ridge Institute for Science and Education, where quality control procedures and analyses are carried out. Rates of absences and rates of diagnoses associated with absences are analyzed by occupation and other relevant variables. They maymore » be compared with the disease experience of different groups within the DOE work force and with populations that do not work for DOE to identify disease patterns or clusters that may be associated with work activities. This amended annual report corrects errors in the initial release of the BNL report for 1994. In this annual report, the 1994 morbidity data for BNL are summarized.« less

Sick leave and its determinants in professional soldiers of the Slovenian Armed Forces.

PubMed

Selič, Polona; Petek, Davorina; Serec, Maša; Rus Makovec, Maja

2010-12-01

To assess whether demographic characteristics, self-rated health status, coping behaviors, satisfaction with important interpersonal relationships, financial situation, and current overall quality of life are determinants of sick leave duration in professional soldiers of the Slovenian Armed Forces. In 2008, 448 military personnel on active duty in the Slovenian Armed Forces were invited to participate in the study and 390 returned the completed questionnaires (response rate 87%). The questionnaires used were the self-rated health scale, sick leave scale, life satisfaction scale, Folkman-Lazarus' Ways of Coping Questionnaire, and a demographic data questionnaire. To partition the variance across a wide variety of indicators of participants' experiences, ordinal modeling procedures were used. A multivariate ordinal regression model, explaining 24% of sick leave variance, showed that the following variables significantly predicted longer sick leave duration: female sex (estimate, 1.185; 95% confidence interval [CI], 0.579-1.791), poorer self-rated health (estimate, 3.243; 95% CI, 1.755-4.731), lower satisfaction with relationships with coworkers (estimate, 1.333; 95% CI, 0.399-2.267), and lower education (estimate, 1.577; 95% CI, 0.717-2.436). The impact of age and coping mechanisms was not significant. Longer sick leave duration was found in women and respondents less satisfied with their relationships with coworkers, and these are the groups to which special attention should be awarded when planning supervision, work procedures, and gender equality policy of the Armed Forces. A good way of increasing the quality of interpersonal relationships at work would be to teach such skills in teaching programs for commanding officers.

The context of oncology nursing practice: an integrative review.

PubMed

Bakker, Debra; Strickland, Judith; Macdonald, Catherine; Butler, Lorna; Fitch, Margaret; Olson, Karin; Cummings, Greta

2013-01-01

In oncology, where the number of patients is increasing, there is a need to sustain a quality oncology nursing workforce. Knowledge of the context of oncology nursing can provide information about how to create practice environments that will attract and retain specialized oncology nurses. The aims of this review were to determine the extent and quality of the literature about the context of oncology nursing, explicate how "context" has been described as the environment where oncology nursing takes place, and delineate forces that shape the oncology practice environment. The integrative review involved identifying the problem, conducting a structured literature search, appraising the quality of data, extracting and analyzing data, and synthesizing and presenting the findings. Themes identified from 29 articles reflected the surroundings or background (structural environment, world of cancer care), and the conditions and circumstances (organizational climate, nature of oncology nurses' work, and interactions and relationships) of oncology nursing practice settings. The context of oncology nursing was similar yet different from other nursing contexts. The uniqueness was attributed to the dynamic and complex world of cancer control and the personal growth that is gained from the intense therapeutic relationships established with cancer patients and their families. The context of healthcare practice has been linked with patient, professional, or system outcomes. To achieve quality cancer care, decision makers need to understand the contextual features and forces that can be modified to improve the oncology work environment for nurses, other providers, and patients.

[Importance of social tuberculosis prophylaxis for the Armed Forces in present conditions].

PubMed

Muchaidze, R D; Dantsev, V V; Beznosik, R V; Spitsyn, M G; Shitov, Yu N

2016-02-01

Lately social prophylaxis of tuberculosis has taken on special significance in the Armed Forces of the Russian Federation. Thank to social measures of the modern military reform, such as reduction of conscription term, territorial principle of recruitment for the army, improvement of habitation, service and recreation conditions, improvement of quality and organization of a diet, improvement of quality of a uniform it succeeded in reducing tuberculosis morbidity in military servicemen from 2007 up to 2014 up to 65 percent. Nevertheless, the main ways of tuberculosis control in the army (military service prohibition for citizens with tuberculosis, early active case detection, prophylaxis in risk group, anti-epidemic measures in the army nidus of tuberculosis etc.) are still urgent. To increase an effectiveness of the work done it is necessary to specify procedure and period of preventive fluorography in military servicemen.

75 FR 48929 - Notice of Meeting of the Agricultural Air Quality Task Force

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-12

... Agricultural Air Quality Task Force AGENCY: Natural Resources Conservation Service (NRCS), United States... Triangle Park, North Carolina 27711; (919) 541-5400. The Agricultural Air Quality Task Force (AAQTF) will meet to continue discussions on air quality issues relating to agriculture. Additionally, the Livestock...

Interrelation of the effects caused by the rotation of the whispering gallery modes resonator

NASA Astrophysics Data System (ADS)

Dmitriyeva, Anna D.; Filatov, Yuri V.; Shalymov, Egor V.; Venediktov, Vladimir Yu.

2016-11-01

Optical whispering gallery modes resonators are characterized by unique properties: ultrahigh quality factor, small amount of the modes and small size. It allows to use them in compact high-precision measuring devices. In particular these resonators can be used in the composition of gyros. For today all researches, devoted to the application of the whispering gallery modes resonators in gyros, deals only with one of induced by the rotation effects (Sagnac effect or the influence of centrifugal forces on the resonator size). In this work we study the interrelation of the effects caused by the rotation of the whispering gallery modes resonator. Also in work we consider the possibility of joint application of both effects (the influence of centrifugal forces and Sagnac effect) for measuring angular velocity.

Is any job better than no job? Labor market experiences and depressive symptoms in people living with HIV.

PubMed

Rueda, Sergio; Smith, Peter; Bekele, Tsegaye; O'Brien, Kelly; Husbands, Winston; Li, Alan; Jose-Boerbridge, Murray; Mittmann, Nicole; Rachlis, Anita; Conyers, Liza; Boomer, K B; Rourke, Sean B

2015-01-01

The purpose of this study is to determine the relationship between the psychosocial work environment and labor market experiences (including unemployment) on mental health among adults living with HIV. We used data provided by 538 participants at clinical and community sites across Ontario, Canada. Generalized estimating equation models showed that employment was associated with lower depressive symptoms. For employed participants, adverse psychosocial work conditions, specifically job insecurity, psychological demands, and decision authority were associated with depressive symptoms. For the entire sample, the number of adverse psychosocial work conditions was associated with higher depressive symptoms while participants working in poor quality jobs reported similar levels of depressive symptoms than those who were unemployed or not in the labor force. This study showed that poor quality employment (as assessed by having a high number of adverse psychosocial work exposures) was associated with a similar level of depressive symptoms as unemployment, suggesting that "bad jobs" may not offer the same mental health benefits as "good jobs." Policies to improve employment outcomes should take the quality of employment into account to maximize mental health benefits as better employment may lead to better mental health.

Psychosocial job quality, mental health, and subjective wellbeing: a cross-sectional analysis of the baseline wave of the Australian Longitudinal Study on Male Health.

PubMed

LaMontagne, Anthony D; Milner, Allison; Krnjacki, Lauren; Schlichthorst, Marisa; Kavanagh, Anne; Page, Kathryn; Pirkis, Jane

2016-10-31

Employment status and working conditions are strong determinants of male health, and are therefore an important focus in the Australian Longitudinal Study on Male Health (Ten to Men). In this paper, we describe key work variables included in Ten to Men, and present analyses relating psychosocial job quality to mental health and subjective wellbeing at baseline. A national sample of males aged 10 to 55 years residing in private dwellings was drawn using a stratified multi-stage cluster random sample design. Data were collected between October 2013 and July 2014 for a cohort of 15,988 males, representing a response fraction of 35 %. This analysis was restricted to 18-55 year old working age participants (n = 13,456). Work-related measures included employment status, and, for those who were employed, a number of working conditions including an ordinal scale of psychosocial job quality (presence of low job control, high demand and complexity, high job insecurity, and low fairness of pay), and working time-related stressors such as long working hours and night shift work. Associations between psychosocial job quality and two outcome measures, mental ill-health and subjective wellbeing, were assessed using multiple linear regression. The majority of participants aged 18-55 years were employed at baseline (85.6 %), with 8.4 % unemployed and looking for work, and 6.1 % not in the labour force. Among employed participants, there was a high prevalence of long working hours (49.9 % reported working more than 40 h/week) and night shift work (23.4 %). Psychosocial job quality (exposure to 0/1/2/3+ job stressors) prevalence was 36 %/ 37 %/ 20 %/ and 7 % of the working respondents. There was a dose-response relationship between psychosocial job quality and each of the two outcome measures of mental health and subjective wellbeing after adjusting for potential confounders, with higher magnitude associations between psychosocial job quality and subjective wellbeing. These results extend the study of psychosocial job quality to demonstrate associations with a global measure of subjective wellbeing. Ten to Men represents a valuable new resource for the longitudinal and life course study of work and health in the Australian male population.

Selected Works in Water Supply, Water Conservation and Water Quality Planning.

DTIC Science & Technology

1981-05-01

of change (1970- 1980 ). The Institute’s work reflects the fact that the Corps of Engineers is not a novice in the business of providing water supply for...Urban Water Supply of the Task Force was chaired by the Secretary of the Army. The Subcommittee produced a report on 6 June 1980 evaluating urban water...persuant to the President’s Water Pvizcy message to Congress in 1978. The two other reports were published in 1980 and are discussed below. IWR staff

Families and Mission: A Review of the Effects of Family Factors on Army Attrition, Retention, and Readiness

DTIC Science & Technology

1987-08-01

quality-of-life and support programs differ among the four armed services. What works in the Air Force, in other words, may not work in the Army. - viii...dependents per enlisted member than the Marines (see Table 1). Rotational requirements also differ among the four Armed Services. Separations in the Army, as...correspond to stages of family development. For example, Fletcher and Giesler (1981) found that satisfaction with pay was most important among a set of

Developing Istanbul into a Regional Business Hub

DTIC Science & Technology

2004-12-01

infrastructure, industrial concentration, availability of work force, political stability and cultural affinity. (Galan, Gonzalez-Benito, 2001...and transportation costs, infrastructure, political stability , and quality of labor, appear with a certain degree of relevance on a second level...degree of political stability and government intervention in the economy; the existence of property rights legislation determining the legal rights

Investing in People: A Strategy to Address America's Workforce Crisis. Background Papers. Vols. I-II.

ERIC Educational Resources Information Center

Department of Labor, Washington, DC. Commission on Workforce Quality and Labor Market Efficiency.

The 49 papers in these two volumes were prepared to assist the Commission on Workforce Quality and Labor Market Efficiency in making recommendations for improving the U.S. work force. The papers summarize existing research and make recommendations on subjects reflecting seven Commission tasks: (1) examine the roles and effectiveness of privately…

Curriculum Advancement for Work Force Colleges: The Nicolet College Process.

ERIC Educational Resources Information Center

Bass, Howard G. Sam

The rapid growth since the 1980s of the use of total quality workforce methods in U.S. companies has contributed to the movement for integrating academic and vocational/technical education. This integration seeks to improve the intellectual capabilities of students through applied and contextual learning and thus make them more capable of adapting…

75 FR 45606 - Interagency Ocean Policy Task Force-Final Recommendations of the Interagency Ocean Policy Task Force

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-03

... COUNCIL ON ENVIRONMENTAL QUALITY Interagency Ocean Policy Task Force--Final Recommendations of the Interagency Ocean Policy Task Force AGENCY: Council on Environmental Quality. ACTION: Notice of Availability, Interagency Ocean Policy Task Force's [[Page 45607

Accurate ab initio quartic force fields for borane and BeH2

NASA Technical Reports Server (NTRS)

Martin, J. M. L.; Lee, Timothy J.

1992-01-01

The quartic force fields of BH3 and BeH2 have been computed ab initio using an augmented coupled cluster (CCSD(T)) method and basis sets of spdf and spdfg quality. For BH3, the computed spectroscopic constants are in very good agreement with recent experimental data, and definitively confirm misassignments in some older work, in agreement with recent ab initio studies. Using the computed spectroscopic constants, the rovibrational partition function for both molecules has been constructed using a modified direct numerical summation algorithm, and JANAF-style thermochemical tables are presented.

Thermograpic study of upper extremities in patients with cerebral palsy

NASA Astrophysics Data System (ADS)

Lampe, R.; Kawelke, S.; Mitternacht, J.; Turova, V.; Blumenstein, T.; Alves-Pinto, A.

2015-03-01

Trophic disorders like reduced skin blood circulation are well-known epiphenomenon of cerebral palsy (CP). They can influence quality of life and can lead to skin damages and, as a consequence, to decubitus. Therefore, it is important to analyse temperature regulation in patients with CP. Thermal imaging camera FLIR BCAM SD was used to study the dependency of skin blood circulation in upper extremities of patients with CP on hand dominance, hand force and hand volume. The hand force was evaluated using a conventional dynamometer. The hand volume was measured with a volumeter. A cold stress test for hands was applied in 22 patients with CP and 6 healthy subjects. The warming up process after the test was recorded with the thermal camera. It was confirmed that the hands of patients warm up slower comparing to healthy persons. The patients' working hands warm up faster than non-working ones. A slight correlation was established between the hand grip force of the working hands and their warm up time. No correlation was found between the warming up time and the volume of the hand. The results confirm our assumption that there is a connection of peripheral blood circulation to upper limb motor functions.

Hemispheric Transport of Air Pollutants: Issues, Progress, and Implications

NASA Astrophysics Data System (ADS)

Keating, T.

2007-12-01

Once thought of as only a local or regional issue, air quality is now understood to be influenced by local, regional, hemispheric, and global phenomena. There is well-documented evidence from ground-, aircraft-, and satellite- based observations for the intercontinental transport of ozone, aerosols, mercury, and some persistent organic pollutants. Global and regional models have provided a range of estimates of the influence of emissions on one continent on concentrations and deposition levels on another continent. These estimates have been difficult to compare and the significance of this intercontinental influence for the design of air pollution control policies is not well understood. The Task Force on Hemispheric Transport of Air Pollutants organized under the Convention on Long-Range Transboundary Air Pollution is developing the first systematic assessment of intercontinental transport and hemispheric pollution in the Northern Hemisphere. This presentation by one of the co-chairs of the Task Force will explore the motivations behind the creation of the Task Force, review its progress, and discuss the implications of its work for the development of domestic and international air quality management policies.

Labor force participation and health-related quality of life in HIV-positive men who have sex with men: The Multicenter AIDS Cohort Study

PubMed Central

Rueda, Sergio; Raboud, Janet; Plankey, Michael; Ostrow, David; Mustard, Cameron; Rourke, Sean B.; Jacobson, Lisa P.; Bekele, Tsegaye; Bayoumi, Ahmed; Lavis, John; Detels, Roger; Silvestre, Anthony J.

2013-01-01

Too many people with HIV have left the job market permanently and those with reduced work capacity have been unable to keep their jobs. There is a need to examine the health effects of labor force participation in people with HIV. This study presents longitudinal data from 1,415 HIV-positive men who have sex with men taking part in the Multicenter AIDS Cohort Study. Generalized Estimating Equations show that employment is associated with better physical and mental health quality of life and suggests that there may be an adaptation process to the experience of unemployment. Post-hoc analyses also suggest that people who are more physically vulnerable may undergo steeper health declines due to job loss than those who are generally healthier. However, this may also be the result of a selection effect whereby poor physical health contributes to unemployment. Policies that promote labor force participation may not only increase employment rates but also improve the health of people living with HIV. PMID:22814570

Labor of love. A model for planning human resource needs.

PubMed

Brady, F J

1989-01-01

Typically, the annual budgeting process is the hospital's only attempt to forecast human resource requirements. In times of rapid change, this traditional ad hoc approach is incapable of satisfying either the Catholic hospital's ethical obligations as an employer or its responsibilities to provide healthcare to the poor and suffering. Assumptions about future activity, including volume projections on admissions, patient days, and other services, influence the budgeting process to a large degree. Because the amount of work to be done and the number of employees required to do it are related, changes in demand for service immediately and directly affect staffing requirements. A hospital cannot achieve ethical human resource management or provide high-quality healthcare if inadequate planning forces management into a cycle of crisis-coping--reacting to this year's nursing shortage with a major recruiting effort and next year's financial crunch with a traumatic reduction in force. The human resource planning approach outlined here helps the hospital meet legitimate business needs while satisfying its ethical obligations. The model has four phases and covers a charge to the planning committee; committee appointments; announcements; the establishment of ground rules, focus, and task forces; and the work of each task force.

Quality user support: Supporting quality users

DOE Office of Scientific and Technical Information (OSTI.GOV)

Woolley, T.C.

1994-12-31

During the past decade, fundamental changes have occurred in technical computing in the oil industry. Technical computing systems have moved from local, fragmented quantity, to global, integrated, quality. The compute power available to the average geoscientist at his desktop has grown exponentially. Technical computing applications have increased in integration and complexity. At the same time, there has been a significant change in the work force due to the pressures of restructuring, and the increased focus on international opportunities. The profile of the user of technical computing resources has changed. Users are generally more mature, knowledgeable, and team oriented than theirmore » predecessors. In the 1990s, computer literacy is a requirement. This paper describes the steps taken by Oryx Energy Company to address the problems and opportunities created by the explosive growth in computing power and needs, coupled with the contraction of the business. A successful user support strategy will be described. Characteristics of the program include: (1) Client driven support; (2) Empowerment of highly skilled professionals to fill the support role; (3) Routine and ongoing modification to the support plan; (4) Utilization of the support assignment to create highly trained advocates on the line; (5) Integration of the support role to the reservoir management team. Results of the plan include a highly trained work force, stakeholder teams that include support personnel, and global support from a centralized support organization.« less

[Need for integration and working conditions of locum anaesthesiologists in community hospitals of a French administrative area].

PubMed

Lieutaud, T

2013-06-01

To evaluate the need for locum anaesthetic coverage and the practical consequences (integration, working conditions, quality and safety) arising during the first 5 days of work, when a temporary position is accepted. MEASURED PARAMETERS: 1) Telephone enquiry of administrative services of community hospitals (CH) in one French administrative area (Rhône-Alpes) about their need for locum anaesthetists; 2) if a position was offered, it was accepted when the participation to on-call duties was delayed after the first 5 days of work; 3) during the working period, the following characteristics were assessed: integration of the locum anesthesiologist among team members, comparison of practice patterns to national guidelines; 4) data from the Platines-website of the French Ministry of Health were used to quantify indicators of activity and size of the hospitals and search for correlations between these parameters and working conditions of the locum anaesthetist. Of the 32 CH questioned, 28 were looking for temporary anaesthetic work force but only 11 (35%) accepted a 5-day period before participation to on-call duties and 17 refused this integration period. Four CH declared not to be looking for temporary work force. Characteristics of integration of the locum anaesthetist and standards of work were very different among centers. No hospital administration had a strategy for evaluation of recruited locums. Temporary work force in anaesthesia is widely required in CH of the Rhône-Alpes area but this practice had not been formalised. No recruitment strategy was observable. This questions about the institutions' requirements for anaesthetic services in French public hospitals. Copyright © 2013 Société française d’anesthésie et de réanimation (Sfar). Published by Elsevier SAS. All rights reserved.

The relationship between general measures of fitness, passive range of motion and whole-body movement quality.

PubMed

Frost, David; Andersen, Jordan; Lam, Thomas; Finlay, Tim; Darby, Kevin; McGill, Stuart

2013-01-01

The goal of this study was to establish relationships between fitness (torso endurance, grip strength and pull-ups), hip range of motion (ROM) (extension, flexion, internal and external rotation) and movement quality in an occupational group with physical work demands. Fifty-three men from the emergency task force of a major city police force were investigated. The movement screen comprised standing and seated posture, gait, segmental spine motion and 14 tasks designed to challenge whole-body coordination. Relationships were established between each whole-body movement task, the measures of strength, endurance and ROM. In general, fitness and ROM were not strongly related to the movement quality of any task. This has implications for worker training, in that strategies developed to improve ROM or strength about a joint may not enhance movement quality. Worker-centered injury prevention can be described as fitting workers to tasks by improving fitness and modifying movement patterns; however, the current results show weak correlations between strength, endurance and ROM, and the way individuals move. Therefore, the development of occupation-specific injury prevention strategies may require both fitness and movement-oriented objectives.

High Efficiency, Transparent, Reusable, and Active PM2.5 Filters by Hierarchical Ag Nanowire Percolation Network.

PubMed

Jeong, Seongmin; Cho, Hyunmin; Han, Seonggeun; Won, Phillip; Lee, Habeom; Hong, Sukjoon; Yeo, Junyeob; Kwon, Jinhyeong; Ko, Seung Hwan

2017-07-12

Air quality has become a major public health issue in Asia including China, Korea, and India. Particulate matters are the major concern in air quality. We present the first environmental application demonstration of Ag nanowire percolation network for a novel, electrical type transparent, reusable, and active PM2.5 air filter although the Ag nanowire percolation network has been studied as a very promising transparent conductor in optoelectronics. Compared with previous particulate matter air filter study using relatively weaker short-range intermolecular force in polar polymeric nanofiber, Ag nanowire percolation network filters use stronger long-range electrostatic force to capture PM2.5, and they are highly efficient (>99.99%), transparent, working on an active mode, low power consumption, antibacterial, and reusable after simple washing. The proposed new particulate matter filter can be applied for a highly efficient, reusable, active and energy efficient filter for wearable electronics application.

Introduction to the IEEE International Symposium on Applications of Ferroelectrics and International Symposium on Piezoresponse Force Microscopy and Nanoscale Phenomena in Polar Materials.

PubMed

Ye, Zuo-Guang; Tan, Xiaoli; Bokov, Alexei A

2012-09-01

The 20th IEEE International Symposium on Applications of Ferroelectrics (ISAF) was held on July 24-27, 2011, in Vancouver, British Columbia, Canada, jointly with the International Symposium on Piezoresponse Force Microscopy and Nanoscale Phenomena in Polar Materials (PFM). Over a period of four days, approximately 400 scientists, engineers, and students from around the world presented their work and discussed the latest developments in the field of ferroelectrics, related materials, and their applications. It is particularly encouraging to see that a large number of students (115) were attracted to the joint conference and presented high-quality research works. This trend is not only important to this conference series, but more importantly, it is vital to the future of the ferroelectrics field.

Utah's 1988-93 Vocational-Technical Education Master Plan: A Powerful Resource for Human and Economic Development.

ERIC Educational Resources Information Center

Utah State Board of Higher Education, Salt Lake City.

For Utah residents to remain in the forefront or even stay competitive economically, the state's work force must acquire the knowledge and skills that match or exceed those of their most technically advanced competitors. A powerful engine for economic growth is a high-quality system of vocational-technical education. The majority of Utah public…

Assistance Received by Employed Caregivers and Their Care Recipients: Who Helps Care Recipients when Caregivers Work Full Time?

ERIC Educational Resources Information Center

Scharlach, Andrew E.; Gustavson, Kristen; Dal Santo, Teresa S.

2007-01-01

Purpose: This study examined the association among caregiver labor force participation, employees' caregiving activities, and the amount and quality of care received by care recipients. Design and Methods: Telephone interviews were conducted with 478 adults who were employed full time and 705 nonemployed adults who provided care to a family member…

Nursing Faculty Roles in Teaching Racially and Ethnically Diverse Nursing Students in a Registered Nurse Program

ERIC Educational Resources Information Center

Beard, Kenya V.

2009-01-01

Racial and ethnic health care disparities continue to plague the United States, placing a tremendous personal and societal burden on individuals. A culturally diverse nursing work force can help eliminate these disparities and improve the quality of health care that is delivered. However, the nursing profession does not reflect the nation's…

Vermont Core Standards and Self-Assessment Tool for Center-Based Early Childhood Programs.

ERIC Educational Resources Information Center

Vermont State Agency of Human Services, Waterbury.

In response to the desire to create for child development services a unified system which shares common standards for quality and respects the diversity and uniqueness of individuals and of programs, a committee of the Early Childhood Work Group collected and compared all the different standards now in force for the early childhood programs in the…

The Center for Learning Technologies in Urban Schools (LeTUS) Program[R]. What Works Clearinghouse Intervention Report

ERIC Educational Resources Information Center

What Works Clearinghouse, 2012

2012-01-01

The "LeTUS" program is a three-year, project-based, technology-integrated middle school science curriculum for grades 6-8. The "LeTUS" program is composed of multiple units, each lasting between eight and ten weeks. Topics include global warming, water and air quality, force and motion, communicable diseases, and ecological…

76 FR 52932 - Notice of Meeting of the Agricultural Air Quality Task Force

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-24

... DEPARTMENT OF AGRICULTURE Natural Resources Conservation Service Notice of Meeting of the Agricultural Air Quality Task Force AGENCY: Natural Resources Conservation Service (NRCS). ACTION: Notice of meeting. SUMMARY: The Agricultural Air Quality Task Force (AAQTF) will meet to continue discussions on...

Providing Total Quality Fundamentals: 1995 Workshops for the NASA Lewis Research Center's Technical Services Directorate

NASA Technical Reports Server (NTRS)

Antczak, Paul; Jacinto,Gilda; Simek, Jimmy

1997-01-01

The National Aeronautics and Space Administration's (NASA) agency-wide movement to cultivate a quality workplace is the basis for Lewis Research Center to implement Total Quality Fundamentals (TQF) initiatives. The Lewis Technical Services Directorate (TSD) introduced the Total Quality Fundamentals (TQF) workshops to its work force as an opportunity to introduce the concepts and principles of TQF. These workshops also provided the participants with the opportunity to dialogue with fellow TSD employees and managers. This report describes, through the perspective of the Lewis TSD TQF Coaches, how the TQF work- shop process was accomplished in TSD. It describes the structure for addressing the need, implementation process, input the TSD Coaches provided, common themes and concerns raised, conclusions, and recommendations. The Coaches concluded that these types of workshops could be the key to open the communication channels that are necessary to help everyone at Lewis understand where they fit in the organization. TQF workshops can strengthen the participant's connection with the Mission, Vision of the Center, and Vision of the Agency. Reconunendations are given based on these conclusions that can help the TSD Quality Board develop attainable measures towards a quality workplace.

Public Health Nurses in Israel: A Case Study on a Quality Improvement Project of Nurse's Work Life.

PubMed

Kagan, Ilya; Shachaf, Sara; Rapaport, Zofia; Livne, Tzipi; Madjar, Batya

2017-01-01

Public health nurses (PHNs) working in Well Baby Clinic in Israel's Haifa district were voicing great distress to inspectors-the impossibility of meeting their workload, feeling overwhelmed, poor physical, and technological conditions. They were feeling tired and frustrated and burn-out was rising. The district's nursing management took the decision, together with Tel Aviv University's nursing research unit, to conduct a quality improvement project based on issues that arose from meetings with focus groups on the nurses' difficulties. This paper is a case study of a quality improvement project targeting nurses daily working life. One of its chief contributions is as a study of meeting PHNs' frustration by integrating focus groups and round-table brainstorming (involving nurses, clinic managers and nursing inspectors) in order to identify targets for practical intervention. This strategy has been very successful. It has provided the district's nursing management a battery of forcefully argued and realistically grounded proposals for making the work of Well Baby clinics more relevant to their communities and giving nurses (a) the conditions to meet their assignments and (b) greater professional self-respect. © 2016 Wiley Periodicals, Inc.

A qualitative and quantitative survey of Forensic Medical Examiner workload in the Northumbria Police Force area October 2002-January 2003.

PubMed

Roberts, Geoffrey; Roberts, John; Patton, Hugh Fergus; Patton, Michelle; Megson, Kenneth; Murphy, Rob

2006-01-01

This force-wide study in the Northumbria Police area provides an audit of the quality and quantity of work carried out by Forensic Medical Examiners (FMEs) over a three month period. Approximately 25% of all arrests during the period of the audit resulted in a request for FME assessment of the detainee. About 79% of consultations were performed to establish fitness to detain, in which over 30% of detainees were intoxicated and over 40% addicted to drugs and/or alcohol. Over 30% of those queried for fitness to detain also required advice and occasionally prescription for medication, both for the management of addiction and the treatment of chronic illness. In comparison to prior work this study found lower rates of mental illness in alcohol and drug dependent populations (13% and 6%, respectively). It is hoped this study will provide information in respect of the specific competencies not only required by future FMEs but also nurses working with detainees within the custody suites.

Marketization of refuse collection in Denmark: social and environmental quality jeopardized.

PubMed

Busck, Ole

2007-08-01

Refuse collection has been the main public service to be outsourced in Denmark since the E.U. guidelines on public procurement came into force in 1993. The contracting activities of the municipalities are framed by a complex set of ideologies and objectives, in addition to regulations. At both EU level and at national level, the demands for marketization of the public sector are counterbalanced by demands for social and environmental considerations. The procurement directive reflects the balance legalizing the inclusion of such requirements by contracting. The Danish experiences, however, tell a grim tale of subordination of social requirements in municipal contracting practices with implications for the quality of the service. The results of a recent study of developments in the working conditions at commercial collection companies show deterioration in respect of health and safety, competence building and job security concurrent with the increase in outsourcing and competition in the sector. In the analysis of the results, a combination of municipal cost-saving strategies, harsh market forces and cultural influences are identified as causal factors. Drawing on a brief institutional analysis, it is concluded that the existing normative and regulative framework of municipal contracting needs reinforcement if societal intentions of qualified public services and acceptable working conditions are to be effective. Initiatives to simultaneously improve working conditions and environmental results of collection are called for.

Evaluating a nursing care delivery model using a quality improvement design.

PubMed

Nardone, P L; Markie, J W; Tolle, S

1995-10-01

The goal to develop and implement a new model of nursing care delivery grew out of administrative and shared governance initiatives to improve the quality of nursing care. This evaluative study used both quantitative and qualitative methods. Seven principles related to quality were identified and became the driving force behind the changes. Aspects of these changes in care delivery were piloted on a neurological unit and included implementation of collaborative rounds, a modular structure, role changes, and work redesign. Frequency distribution, questionnaire, focus group, and financial data indicated that there had been improvement in the delivery of care in addition to financial benefits. A considerable amount of the data provided evidence that supported continuing the changes.

Emphasizing the Value of Nephrology Nursing Through Nursing-Sensitive Indicators: A Call for Action.

PubMed

Thomas-Hawkins, Charlotte; Latham, Carolyn E; Hain, Debra J

2017-01-01

Nursing is the largest healthcare profession in the United States (U.S.). As principal frontline caregivers in the U.S. healthcare system, nurses have tremendous influence over a patient's healthcare experience. A growing body of evidence states that the nursing workforce has a direct impact on healthcare quality. A standardized approach to measuring nursing's contribution to patient care and safety using nursing-sensitive quality indicators assists in examining the extent to which nurses and nursing affect the quality and safety of health care. This article focuses on nursing-sensitive quality indicators and discusses healthcare quality indicators and nursing-sensitive indicators used in the U.S. A summary of the work of the American Nephrology Nurses' Association Task Force on Nephrology Nursing-Sensitive Quality Indicators (NNSQI) and an NNSQI exemplar are provided. Copyright© by the American Nephrology Nurses Association.

An introduction to statistical process control in research proteomics.

PubMed

Bramwell, David

2013-12-16

Statistical process control is a well-established and respected method which provides a general purpose, and consistent framework for monitoring and improving the quality of a process. It is routinely used in many industries where the quality of final products is critical and is often required in clinical diagnostic laboratories [1,2]. To date, the methodology has been little utilised in research proteomics. It has been shown to be capable of delivering quantitative QC procedures for qualitative clinical assays [3] making it an ideal methodology to apply to this area of biological research. To introduce statistical process control as an objective strategy for quality control and show how it could be used to benefit proteomics researchers and enhance the quality of the results they generate. We demonstrate that rules which provide basic quality control are easy to derive and implement and could have a major impact on data quality for many studies. Statistical process control is a powerful tool for investigating and improving proteomics research work-flows. The process of characterising measurement systems and defining control rules forces the exploration of key questions that can lead to significant improvements in performance. This work asserts that QC is essential to proteomics discovery experiments. Every experimenter must know the current capabilities of their measurement system and have an objective means for tracking and ensuring that performance. Proteomic analysis work-flows are complicated and multi-variate. QC is critical for clinical chemistry measurements and huge strides have been made in ensuring the quality and validity of results in clinical biochemistry labs. This work introduces some of these QC concepts and works to bridge their use from single analyte QC to applications in multi-analyte systems. This article is part of a Special Issue entitled: Standardization and Quality Control in Proteomics. Copyright © 2013 The Author. Published by Elsevier B.V. All rights reserved.

Remarks Prepared for Delivery to the American Vocational Association [by the Assistant Secretary for Policy, U.S. Department of Labor.

ERIC Educational Resources Information Center

Dorn, Jenna

A number of factors have led to the crisis of work force unpreparedness that the United States now faces, including revolutionary changes that mean businesses now succeed on the qualities of their human rather than material resources. Jobs are demanding better reading, writing, and reasoning skills, and mental agility has replaced manual dexterity…

Force feedback vessel ligation simulator in knot-tying proficiency training.

PubMed

Hsu, Justin L; Korndorffer, James R; Brown, Kimberly M

2016-02-01

Tying gentle secure knots is an important skill. We have developed a force feedback simulator that measures force exerted during knot tying. This pilot study examines the benefits of this simulator in a deliberate practice curriculum. The simulator consists of silastic tubing with a force sensor. Knot quality was assessed using digital caliper measurement. Participants performed 10 vessel ligations as a pretest, then were shown force readings and tied knots until reaching proficiency targets. Average peak forces precurriculum and postcurriculum were compared using Student t test. Participants exerted significantly less force after completing the curriculum (.61 N ± .22 vs 1.42 N ± .53, P < .001), and had fewer air knots (10% vs 27%). The curriculum was completed in an average of 19.4 ± 6.27 minutes and required an average of 11.7 ± 4.03 knots to reach proficiency. This study demonstrates the feasibility of real-time feedback in learning to tie delicate knots. The curriculum can be completed in a reasonable amount of time, and may also work as a warm-up exercise before a surgical case. Copyright © 2016 Elsevier Inc. All rights reserved.

Inculcating Quality Concepts in the US Air Force: Right Music, Wrong Step

DTIC Science & Technology

1994-04-01

CONCEPTS IN THE US AIR FORCE: RIGHT MUSIC , WRONG STEP Acceslon For NTIS CRA&J DTIC TAB Unannounced fJ by Justification Barbara A. Kucharczyk By. Lieutenant...TITLE: Inculcating Quality Concepts in the US Air Force: Right Music , Wrong Step AUTHOR: Barbara A. Kucharczyk, Lieutenant Colonel, USAF In its...perceived attitudinal backlash.4 While basic quality concepts are certainly the right music , many Air Force members are dancing the wrong step. Why? This

Do inclusive work environments matter? Effects of community-integrated employment on quality of life for individuals with intellectual disabilities.

PubMed

Blick, Rachel N; Litz, Katherine S; Thornhill, Monica G; Goreczny, Anthony J

2016-01-01

More individuals with an intellectual disability now possess prerequisite skills and supports necessary for successful work force integration than did previous generations. The current study compared quality of life of community-integrated workers with those participating in sheltered vocational workshops and adult day care programs. We considered numerous indices of quality of life, including inclusion and community participation; satisfaction within professional services, home life, and day activities; dignity, rights, and respect received from others; fear; choice and control; and family satisfaction. Our data revealed several important differences in quality of life across daytime activities; participants involved in community-integrated employment tended to be younger, indicated a greater sense of community integration, and reported more financial autonomy than did those who participated in adult day care programs and sheltered workshops. However, individuals reported no differences in overall satisfaction across daytime activities. We discuss generational differences across employment status as well as possible explanations to account for high levels of satisfaction across daytime activities. Copyright © 2016 Elsevier Ltd. All rights reserved.

Behavioral health in the Department of Defense Patient-Centered Medical Home: history, finance, policy, work force development, and evaluation.

PubMed

Hunter, Christopher L; Goodie, Jeffrey L

2012-09-01

Integrating behavioral health services into the patient-centered medical home (PCMH) is an important component for meeting the goals of easy access, whole person, coordinated, and integrated care. Unlike most PCMH initiatives, the Department of Defense's (DoD) Military Health System (MHS) launched its PCMH initiative with integrated behavioral health services. This integration facilitates the MHS's goal to meet its strategic imperatives under the "Quadruple Aim" of (1) maximizing readiness, (2) improving the health of the population, (3) enhancing the patient experience of care (including quality, access, and reliability), and (4) responsibly managing per capita cost of care. The MHS experience serves as a guide to other organizations. We discuss the historical underpinnings, funding, policy, and work force development strategies that contributed to integrated behavioral healthcare being a mandated component of the MHS's PCMH.

A review of dynamic stability of repulsive-force maglev suspension systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai, Y.; Rote, D.M.

1998-07-01

Vehicle dynamics and the need to satisfy ride quality requirements have long been recognized as crucial to the commercial success of passenger-carrying transportation systems. Design concepts for maglev systems are no exception. Early maglev investigators and designers were well aware of the importance of ride quality and took care to ensure that their designs would meet acceptable ride quality standards. In contrast, the dynamic stability of electrodynamic suspension (EDS) systems, which has obvious implications for system safety and cost as well as for ride quality, has not received nearly as much attention. Because of the well-known under-damped nature of EDSmore » suspension systems and the observation of instabilities in laboratory-scale model systems, it is prudent to develop a better understanding of vehicle stability characteristics. The work reported in this was undertaken with the intention of summarizing information that has been accumulated worldwide and that is relevant to dynamic stability of repulsive-force maglev suspension systems, assimilating that information, and gaining an understanding of the factors that influence that stability. Included in the paper is a discussion and comparison of results acquired from some representative tests of large-scale vehicles on linear test tracks, together with analytical and laboratory-scale investigations of stability and dynamics of EDS systems. This paper will also summarize the R and D activities at Argonne National Laboratory (ANL) since 1991 to study the nature of the forces that are operative in an EDS system and the dynamic stability of such systems.« less

Analysis of Handling Qualities Design Criteria for Active Inceptor Force-Feel Characteristics

NASA Technical Reports Server (NTRS)

Malpica, Carlos A.; Lusardi, Jeff A.

2013-01-01

The force-feel system characteristics of the cyclic inceptors of most helicopters are set based on the characteristics of the mechanical components in the control system (mass, springs, friction dampers, etc.). For these helicopters, the force-feel characteristics typically remain constant over the entire flight envelope, with perhaps a trim release to minimize control forces while maneuvering. With the advent of fly-by-wire control systems and active inceptors in helicopters, the force-feel characteristics are now determined by the closed-loop response of the active inceptor itself as defined by the inertia, force/displacement gradient, damping, breakout force and detent shape configuration parameters in the inceptor control laws. These systems give the flexibility to dynamically prescribe different feel characteristics for different control modes or flight conditions, and the ability to provide tactile cueing to the pilot through the actively controlled side-stick or center-stick cyclic inceptor. For rotorcraft, a few studies have been conducted to assess the effects of cyclic force-feel characteristics on handling qualities in flight. An early study provided valuable insight into the static force-deflection characteristics (force gradient) and the number of axes controlled by the side-stick controller for the U.S. Army's Advanced Digital/Optical Control System (ADOCS) demonstrator aircraft [1]. The first of a series of studies providing insight on the inceptor dynamic force-feel characteristics was conducted on the NASA/Army CH-47B variable-stability helicopter [2]. This work led to a proposed requirement that set boundaries based on the cyclic natural frequency and inertia, with the stipulation of a lower damping ratio limit of 0.3 [3]. A second study was conducted by the Canadian Institute for Aerospace Research using their variable-stability Bell 205A helicopter [4]. This research suggested boundaries for stick dynamics based on natural frequency and damping ratio. While these two studies produced boundaries for acceptable/unacceptable stick dynamics for rotorcraft, they were not able to provide guidance on how variations of the stick dynamics in the acceptable region impact handling qualities. More recently, a ground based simulation study [5] suggested little benefit was to be obtained from variations of the damping ratio for a side-stick controller exhibiting high natural frequencies (greater than 17 rad/s) and damping ratios (greater than 2.0). A flight test campaign was conducted concurrently on the RASCAL JUH-60A in-flight simulator and the ACT/FHS EC-135 in flight simulator [6]. Upon detailed analysis of the pilot evaluations the study identified a clear preference for a high damping ratio and natural frequency of the center stick inceptors. Side stick controllers were found to be less sensitive to the damping. While these studies have compiled a substantial amount of data, in the form of qualitative and quantitative pilot opinion, a fundamental analysis of the effect of the inceptor force-feel system on flight control is found to be lacking. The study of Ref. [6] specifically concluded that a systematic analysis was necessary, since discrepancies with the assigned handling qualities showed that proposed analytical design metrics, or criteria, were not suitable. The overall goal of the present study is to develop a clearer fundamental understanding of the underlying mechanisms associated with the inceptor dynamics that govern the handling qualities using a manageable analytical methodology.

Influence of trabecular bone quality and implantation direction on press-fit mechanics.

PubMed

Damm, Niklas B; Morlock, Michael M; Bishop, Nicholas E

2017-02-01

Achieving primary stability of uncemented press-fit prostheses in patients with poor quality bone can involve axial implantation forces large enough to cause bone fracture. Radial implantation eliminates intraoperative impaction forces and could prevent this damage. Platens of two commercial implant surfaces ("Beaded" and "Flaked") were implanted onto trabecular bone specimens of varying quality in a press-fit simulator. Samples were implanted with varying interference, either axially (shear) or radially (normal). Push-in and pull-out forces were measured to assess stability. Microstructural changes in the bone were determined from μCT analysis. For force-defined implantation analysis, push-in and pull-out forces both increased proportionally with increasing radial force, independent of implantation direction, bone quality or implant surface. For position-defined implantation analysis, pull-out forces were generally found to increase with interference and to be greater for radial than axial implantation direction, and to be lower for poor quality bone. Bone density increased locally at the tested interface due to implantation, in particular for the Beaded surface under axial implantation. If a safe radial stress can be determined for cortical bone in a particular patient, the associated implantation force, and pull-out force which represents primary stability, can be directly derived, regardless of implantation direction, bone quality or implant surface. Radial implantation delivers primary stability that is no worse than that for axial implantation and may eliminate potentially damaging impaction forces. Development of implant designs based on this principal might improve implant fixation. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:224-233, 2017. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

Nursing unit teams matter: Impact of unit-level nurse practice environment, nurse work characteristics, and burnout on nurse reported job outcomes, and quality of care, and patient adverse events--a cross-sectional survey.

PubMed

Van Bogaert, Peter; Timmermans, Olaf; Weeks, Susan Mace; van Heusden, Danny; Wouters, Kristien; Franck, Erik

2014-08-01

To investigate the impact of nurse practice environment factors, nurse work characteristics, and burnout on nurse reported job outcomes, quality of care, and patient adverse events variables at the nursing unit level. Nurse practice environment studies show growing insights and knowledge about determining factors for nurse workforce stability, quality of care, and patient safety. Until now, international studies have primarily focused on variability at the hospital level; however, insights at the nursing unit level can reveal key factors in the nurse practice environment. A cross-sectional design with a survey. In a cross-sectional survey, a sample of 1108 nurses assigned to 96 nursing units completed a structured questionnaire composed of various validated instruments measuring nurse practice environment factors, nurse work characteristics, burnout, nurse reported job outcomes, quality of care, and patient adverse events. Associations between the variables were examined using multilevel modelling techniques. Various unit-level associations (simple models) were identified between nurse practice environment factors, nurse work characteristics, burnout dimensions, and nurse reported outcome variables. Multiple multilevel models showed various independent variables such as nursing management at the unit level, social capital, emotional exhaustion, and depersonalization as important predictors of nurse reported outcome variables such job satisfaction, turnover intentions, quality of care (at the unit, the last shift, and in the hospital within the last year), patient and family complaints, patient and family verbal abuse, patient falls, nosocomial infections, and medications errors. Results suggested a stable nurse work force, with the capability to achieve superior quality and patient safety outcomes, is associated with unit-level favourable perceptions of nurse work environment factors, workload, decision latitude, and social capital, as well low levels of burnout. Nurses, physicians, nursing leaders, and executives share responsibility to create an environment supportive of interdisciplinary team development. Copyright © 2013 Elsevier Ltd. All rights reserved.

A Practical Framework Toward Prediction of Breaking Force and Disintegration of Tablet Formulations Using Machine Learning Tools.

PubMed

Akseli, Ilgaz; Xie, Jingjin; Schultz, Leon; Ladyzhynsky, Nadia; Bramante, Tommasina; He, Xiaorong; Deanne, Rich; Horspool, Keith R; Schwabe, Robert

2017-01-01

Enabling the paradigm of quality by design requires the ability to quantitatively correlate material properties and process variables to measureable product performance attributes. Conventional, quality-by-test methods for determining tablet breaking force and disintegration time usually involve destructive tests, which consume significant amount of time and labor and provide limited information. Recent advances in material characterization, statistical analysis, and machine learning have provided multiple tools that have the potential to develop nondestructive, fast, and accurate approaches in drug product development. In this work, a methodology to predict the breaking force and disintegration time of tablet formulations using nondestructive ultrasonics and machine learning tools was developed. The input variables to the model include intrinsic properties of formulation and extrinsic process variables influencing the tablet during manufacturing. The model has been applied to predict breaking force and disintegration time using small quantities of active pharmaceutical ingredient and prototype formulation designs. The novel approach presented is a step forward toward rational design of a robust drug product based on insight into the performance of common materials during formulation and process development. It may also help expedite drug product development timeline and reduce active pharmaceutical ingredient usage while improving efficiency of the overall process. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Interagency field manual for the collection of water-quality data

USGS Publications Warehouse

Lurry, Dee L.; Kolbe, Christine M.

2000-01-01

The USEPA, IBWC, USGS, and Texas Natural Resource Conservation Commission (TNRCC) have been working cooperatively to establish a Water-Quality Monitoring Council for the international reach of the Rio Grande (Río Bravo). A similar effort is occurring along the western international boundary with interested partners including the U.S. Bureau of Reclamation (BOR), Arizona Department of Environmental Quality (ADEQ), and the California Regional Water Quality Control Board (CRWQCB). As of February 1997, the partners agreed to work towards greater cooperation, specifically: 1. to revise the 1977 Joint Report of IBWC Engineers as specified in IBWC Minute No. 289; 2. to implement a binational Intergovernmental Task Force for Water-Quality Monitoring (ITFM) workgroup by inviting the participation of cooperators from Mexico; 3. to review and revise each agency’s existing monitoring network to reduce interagency redundancy; 4. to develop a bilingual manual for water-quality monitoring that would describe various field methods used for sampling water, aquatic biology, and sediment, and for assessing stream habitat; and selection of methods on the basis of DQOs, representativeness, and limitations; 5. to establish a common, easily accessible water-quality database; and 6. to hold joint training programs in water-quality monitoring and data management. Part of the fourth goal—to develop a field manual for water-sample-collection methods—will be accomplished with the publication of this manual.

Influence of baking conditions on the quality attributes of sponge cake.

PubMed

Ureta, M Micaela; Olivera, Daniela F; Salvadori, Viviana O

2017-03-01

Sponge cake is a sweet bakery product characterized by its aerated and soft crumb and by its thin-coloured crust. The aim of this work is to analyse the influence of baking conditions (natural or forced convection, steam injection, oven temperature from 140 ℃ to 180 ℃) on sponge cake quality. Both crust and crumb regions were characterized by means of colour development, water content, crust/crumb relation, crust thickness and crumb structure (in terms of porosity, crumb density and texture). Colour measurements allowed obtaining an accurate model for browning kinetics. Crumb water content remains almost constant, while considerable dehydration occurs in the crust. In general, no significant differences due to baking conditions were found in the instrumental quality analysis.

CAD-based strength analysis of EK-18 excavator bucket construction for mounting of anti-adhesive devices

NASA Astrophysics Data System (ADS)

Zenkov, S. A.; Lobanov, D. V.

2018-03-01

3D rigid-body model of a bucket of power shovel EK-18 was built using modern CAD-software. Tetrahedral grid with 10-node second-order elements was chosen, and the given model was imported to APM WinMachine - model preparation preprocessor for finite element analysis. The finite element model was based on the geometrical model, imported from KOMPAS-3D to APM Studio. Calculation of stressed-strained state of the bucket was carried out under the forces emerging while digging with “back hoe” equipment. Shift, deformation and tension charts were planned and the most and the least strained areas were pointed out. Wet coherent soil excavation deals with soil adhesion to working bodies of power shovels and leads to reduced performance. The performance decrease is caused by a reduction of useful bucket capacity and partial unloading, increased front resistance to cutting (digging) caused by wet soil adhesion to a working body, increased bucket entry resistance, increased idle time caused by necessity to clean working bodies. Also energy losses increase and quality of work drops because friction forces go up. Friction force occurs while digging and levelling account for 30…70 percent of total digging resistance while performance decreases 1.2…2 times and more. Vibrothermal exposure creates new technological effect which involves a wider humidity range of efficient application and a reduction of friction forces. Disintegrating adhesion bonds with heating requires less driving force from the vibrator. Vibration boosts up heating of the contact layer, which reduces thermal energy losses. However, the question of piezoelectric ceramic actuators location on the excavator bucket needs to be dealt with. The most suitable spots for mounting piezoelectric ceramic devices for reducing soil adhesion to the excavator bucket were defined. Their efficiency is derived from combined (vibrothermal) methods of exposure. Such devices eliminates soil adhesion to the bucket and increases efficiency of using power shovels with wet coherent soils.

Beyond the Simple Model of Child Care Facilities: Support Spaces for Quality

ERIC Educational Resources Information Center

Greenman, Jim

2006-01-01

The age of child care building on a wide scale really began in the 1970s. Before that, there had been a history of day nurseries going back to the turn of the century and Lanham Act centers during World War II to provide care for "Rosie the Riveter" mothers in the work force. The "purpose built" child care center was an economical box with almost…

Modelling Career Intent of Specific Air Force Personnel Categories

DTIC Science & Technology

1982-09-01

Contributions are payments the participant makes to the organization in the form of work. It is postu- lated that as the balance of inducements...contributions is believed to have the opposite effect. The inducement-contribution balance is a function of two major components: perceived ease of movement...set of issues, preliminary efforts centered around the development of a theoretically based quality of worklife model which would provide a logical

The Impact of a Model Partnership in a Medical Postgraduate Program in North-South and South-South Collaboration on Trainee Retention, Program Sustainability and Regional Collaboration

ERIC Educational Resources Information Center

Amare, Beede Lemma; Lutale, Janet; Derbew, Miliard; Mathai, Dilip; Langeland, Nina

2017-01-01

North-South educational partnerships can potentially alleviate the scarcity of health work force in the South. A model program with the objectives of sustainability, high trainee retention, quality education, and capacity building is the goal of many similar programs. To achieve these goals a program of postgraduate clinical specialty training was…

Literacies in a Changing Workplace: A Look at the Uses of Literacy in a Multi-ethnic, High-tech Electronics Factory.

ERIC Educational Resources Information Center

Katz, Mira-Lisa; Jury, Mark

Many studies and much "common knowledge" in the United States today decry the quality of the work force and the "basic literacy needs" of today's and tomorrow's workers. Widespread concern exists that U.S. workers are ill-equipped to compete in the global marketplace and that schools and vocational programs are failing to keep pace with changing…

Quality Time: Temporal Constraints to Continual Process Development in the Air Force

DTIC Science & Technology

2017-06-01

quality is baked into the process or quality must be obtained through testing and correction of deficiencies. Furthermore, the Air Force concluded...that if quality is baked in it comes “for free” but if quality must be inspected or tested in it comes at a cost. As a manager or a leader, it is

The Psychometric Properties and the Development of the Indicators of Quality Nursing Work Environments in Taiwan.

PubMed

Lin, Chiou-Fen; Lu, Meei-Shiow; Huang, Hsiu-Ying

2016-03-01

The nursing shortage in medical institutions in Taiwan averaged 9% in 2012, considerably higher than the 5% indicated in the literature. As a result, many hospitals have been forced to close wards or reduce beds. Despite the acute need, the percentage of registered nurses who are employed as nurses in Taiwan (60.4%) is considerably lower than those in Canada or the United States. This low rate may be because of the poor working environment for nurses in Taiwan. This study aimed to develop a set of nursing work environment quality indicators for Taiwan and to test the reliability and validity of the resulting survey tool. Multiple methods were used in this study. In Phase 1, we organized an expert panel, reviewed the literature, and conducted seven rounds of expert panel discussion and six focus group discussions with nursing directors. The goal was to draft indicators representing a quality nursing work environment to fit current conditions in Taiwan. In Phase 2, we conducted an expert review for content validity, held three public hearings, and conducted a survey. Four hundred twenty-seven questionnaires were sent out, with 381 returned. The goal was to test the content validity, construct validity, and internal consistency reliability. The study produced a set of indicators of a quality nursing work environment with eight dimensions and 65 items. The content validity index for importance and suitability dimensions were 1.0, whereas the internal consistency was 0.91. The eight dimensions were safe practice environment (16 items), quality and quantity of staff (four items), salary and welfare (seven items), professional specialization and teamwork (seven items), work simplification (five items), informatics (five items), career development (nine items), and support and caring (12 items). The overall load for the indicators was 77.57%. The developed indicators may be used to evaluate the quality of nursing work environments. Furthermore, the indicators may be used in hospital surveys to establish baseline conditions and for outcome research that measures improvement in nursing work environments after interventions.

Multiscale analysis of replication technique efficiency for 3D roughness characterization of manufactured surfaces

NASA Astrophysics Data System (ADS)

Jolivet, S.; Mezghani, S.; El Mansori, M.

2016-09-01

The replication of topography has been generally restricted to optimizing material processing technologies in terms of statistical and single-scale features such as roughness. By contrast, manufactured surface topography is highly complex, irregular, and multiscale. In this work, we have demonstrated the use of multiscale analysis on replicates of surface finish to assess the precise control of the finished replica. Five commercial resins used for surface replication were compared. The topography of five standard surfaces representative of common finishing processes were acquired both directly and by a replication technique. Then, they were characterized using the ISO 25178 standard and multiscale decomposition based on a continuous wavelet transform, to compare the roughness transfer quality at different scales. Additionally, atomic force microscope force modulation mode was used in order to compare the resins’ stiffness properties. The results showed that less stiff resins are able to replicate the surface finish along a larger wavelength band. The method was then tested for non-destructive quality control of automotive gear tooth surfaces.

Experimental Analysis of the Influence of Drill Point Angle and Wear on the Drilling of Woven CFRPs

PubMed Central

Feito, Norberto; Díaz-Álvarez, José; Díaz-Álvarez, Antonio; Cantero, José Luis; Miguélez, María Henar

2014-01-01

This paper focuses on the effect of the drill geometry on the drilling of woven Carbon Fiber Reinforced Polymer composite (CFRPs). Although different geometrical effects can be considered in drilling CFRPs, the present work focuses on the influence of point angle and wear because they are the important factors influencing hole quality and machining forces. Surface quality was evaluated in terms of delamination and superficial defects. Three different point angles were tested representative of the geometries commonly used in the industry. Two wear modes were considered, being representative of the wear patterns commonly observed when drilling CFRPs: flank wear and honed cutting edge. It was found that the crossed influence of the point angle and wear were significant to the thrust force. Delamination at the hole entry and exit showed opposite trends with the change of geometry. Also, cutting parameters were checked showing the feed’s dominant influence on surface damage. PMID:28788675

The effect of normative social forces on managed care organizations: implications for strategic management.

PubMed

Kirby, E G; Sebastian, J G

1998-01-01

Drawing on institutional theory, this study examines how adherence to a number of "institutional" and "technical" environmental forces can influence the business success of managed care organizations (MCOs). The standards studied include: (1) institutional forces: socially accepted procedures for delivering care (access to quality care, availability of information, and delivery of care in a personal manner); and (2) technical forces: industry standards for cost control and efficient use of financial and medical resources. The most significant finding is that successful MCOs must conform to both institutional and technical forces to be successful. MCOs that conform to either one or the other type of standard were no more successful than those that conformed to neither. These findings have several important implications for MCO strategy. First, to be successful, MCO executives must understand the external environment in which they operate. They must anticipate and respond to shifts in that environment. Second, this understanding of the external environment must place equal emphasis on societal demands (e.g., for accessible care and information) and on technical demands (e.g., for cost-efficient care). These findings may well reflect that once managed care penetration reaches relatively high levels, marketshare can no longer be gained through cost-efficiency alone; rather, enrollee satisfaction based on societal demands becomes a key factor in maintaining and gaining marketshare. Institutional theory provides' some strategies for accomplishing these goals. Cost-containment strategies include implementing policies for cutting costs in areas that do not affect the quality of care, such as using generic drugs and reducing administrative excesses and redundancies. At the same time, MCOs must implement strategies aimed at improving conformity to prevailing societal perceptions of appropriate care, including providing patients more freedom to choose their physicians and encouraging and rewarding care providers for being friendly and personable. An MCO should work to inform the public of the organization's efforts to provide high-quality, low-cost medical care in a friendly, convenient manner.

Effect of sleep deficit, knowledge of results, and stimulus quality on reaction time and response force.

PubMed

Jaśkowski, P; Włodarczyk, D

1997-04-01

Some recent findings suggested that response force measured during reaction time experiments might reflect changes in activation. We performed an experiment in which the effect of sleep deprivation, knowledge of results, and stimulus quality on response force was studied in simple and choice reaction tasks. As expected, both simple and choice reaction times increased with sleep deficit. Further, simple and choice reactions were faster with knowledge of results and slowed down when stimulus quality was degraded. As sleep deprivation affects both arousal and activation, we expected a detrimental effect of sleep on force amplitude. On the other hand, knowledge of results was expected to increase force by its compensatory effect on arousal and activation. No effect of sleep deprivation on response force was found. Knowledge of results increased response force independently of sleep deprivation.

Environmental Assessment for Implementation of the Schriever Air Force Base Integrated Natural Resources Management Plan

DTIC Science & Technology

2008-03-01

Force Policy Directive (AFPD) 32-70, Environmental Quality ( July 20, 1994); and Air Force Instruction (AFI) 32-7064, Integrated Natural Resources...Environmental Conservation Program; Air Force Policy Directive (AFPD) 32-70, Environmental Quality ( July 20, 1994); and Air Force Instruction (AFI...thunderstorms occur in the late spring to summer months along the Front Range and can result in flash flood conditions (greatest potential in July and August

Machinability of drilling T700/LT-03A carbon fiber reinforced plastic (CFRP) composite laminates using candle stick drill and multi-facet drill

NASA Astrophysics Data System (ADS)

Wang, Cheng-Dong; Qiu, Kun-Xian; Chen, Ming; Cai, Xiao-Jiang

2015-03-01

Carbon Fiber Reinforced Plastic (CFRP) composite laminates are widely used in aerospace and aircraft structural components due to their superior properties. However, they are regarded as difficult-to-cut materials because of bad surface quality and low productivity. Drilling is the most common hole making process for CFRP composite laminates and drilling induced delamination damage usually occurs severely at the exit side of drilling holes, which strongly deteriorate holes quality. In this work, the candle stick drill and multi-facet drill are employed to evaluate the machinability of drilling T700/LT-03A CFRP composite laminates in terms of thrust force, delamination, holes diameter and holes surface roughness. S/N ratio is used to characterize the thrust force while an ellipse-shaped delamination model is established to quantitatively analyze the delamination. The best combination of drilling parameters are determined by full consideration of S/N ratios of thrust force and the delamination. The results indicate that candle stick drill will induce the unexpected ellipse-shaped delamination even at its best drilling parameters of spindle speed of 10,000 rpm and feed rate of 0.004 mm/tooth. However, the multi-facet drill cutting at the relative lower feed rate of 0.004 mm/tooth and lower spindle speed of 6000 rpm can effectively prevent the delamination. Comprehensively, holes quality obtained by multi-facet drill is much more superior to those obtained by candle stick drill.

Results of soil, ground-water, surface-water, and streambed-sediment sampling at Air Force Plane 85, Columbus, Ohio, 1996

USGS Publications Warehouse

Parnell, J.M.

1997-01-01

The U.S. Geological Survey (USGS), in cooperation with Aeronautical Systems Center, Environmental Management Directorate, Restoration Division, prepared the Surface- and Ground- Water Monitoring Work Plan for Air Force Plant 85 (AFP 85 or Plant), Columbus, Ohio, under the Air Force Installation Restoration Program to characterize any ground-water, surface-water, and soil contamination that may exist at AFP 85. The USGS began the study in November 1996. The Plant was divided into nine sampling areas, which included some previously investi gated study sites. The investigation activities included the collection and presentation of data taken during drilling and water-quality sampling. Data collection focused on the saturated and unsatur ated zones and surface water. Twenty-three soil borings were completed. Ten monitoring wells (six existing wells and four newly constructed monitoring wells) were selected for water-quality sam pling. Surface-water and streambed-sediment sampling locations were chosen to monitor flow onto and off of the Plant. Seven sites were sampled for both surface-water and streambed-sediment quality. This report presents data on the selected inorganic and organic constituents in soil, ground water, surface water, and streambed sediments at AFP 85. The methods of data collection and anal ysis also are included. Knowledge of the geologic and hydrologic setting could aid Aeronautical Systems Center, Environmental Management Directorate, Restoration Division, and its governing regulatory agencies in future remediation studies.

Flow Control and Design Assessment for Drainage System at McMurdo Station, Antarctica

DTIC Science & Technology

2014-11-24

Council BMP Best Management Practice CASQUA California Storm Water Quality Task Force CRREL Cold Regions Research and Engineering Laboratory DS...ponds The California Storm Water Quality Task Force (CASQUA 1993) defines a sediment basin as “a pond created by excavation or constructing an em...British Standards Institution. California Storm Water Quality Task Force (CASQUA). 1993. ESC41: Check Dams. In Stormwater Best Management Practices

CALL FOR PAPERS: 13th International Conference on Force and Mass Measurement

NASA Astrophysics Data System (ADS)

1992-01-01

10 14 May 1993, Helsinki Fair Centre, Finland Scope of the Conference The Conference reports and reviews the state of the art and future trends in force and mass measurements in science and industry. Emphasis is on the applications of new methods, current problems in calibration and quality control, as well as on advancements in new sensor technologies and industrial application of force and mass measurements. Main Themes and Topics 1. The state of the art and development trends in force and mass measurements Development and stability of high level mass standards Mass comparators and force standard machine New research topics in mass and force 2. Calibration and quality control Calibration methods Estimation of uncertainties and classification of accuracies Relations between calibration, testing and quality control Requirements for quality control Verification of weighing instruments and their main devices 3. Application of force and mass measurements Automatic weighing Mass flow measurements Quality control in process industry Sensor technologies Practical applications Special applications in industry, trade, etc. Deadline for submission of abstracts: 30 June 1992. For further information please contact: Finnish Society of Automation, Asemapäällikönkatu 12C, SF-00520 HELSINKI, Finland Phone: Int. +3580 1461 644, Fax: Int. +3580 1461 650

Correlation analysis between work-related musculoskeletal disorders and the nursing practice environment, quality of life, and social support in the nursing professionals

PubMed Central

Yan, Ping; Yang, Yi; Zhang, Li; Li, Fuye; Huang, Amei; Wang, Yanan; Dai, Yali; Yao, Hua

2018-01-01

Abstract We aim to analyze the correlated influential factors between work-related musculoskeletal disorders (WMSDs) and nursing practice environment and quality of life and social support. From January 2015 to October 2015, cluster sampling was performed on the nurses from 12 hospitals in the 6 areas in Xinjiang. The questionnaires including the modified Nordic Musculoskeletal Questionnaire, Practice Environment Scale (PES), the Mos 36-item Short Form Health Survey, and Social Support Rating Scale were used to investigate. Multivariate logistic regression analysis was used to explore the influential factors of WMSDs. The total prevalence of WMSDs was 79.52% in the nurses ever since the working occupation, which was mainly involved waist (64.83%), neck (61.83%), and shoulder (52.36%). Multivariate logistic regression analysis indicated age (≥26 years), working in the Department of Surgery, Department of Critical Care, Outpatient Department, and Department of Anesthesia, working duration of >40 hours per week were the risk factors of WMSDs in the nurses. The physiological function (PF), body pain, total healthy condition, adequate working force and financial support, and social support were the protective factors of WMSDs. The prevalence of WMSDs in the nurses in Xinjiang Autonomous Region was high. PF, bodily pain, total healthy condition, having adequate staff and support resources to provide quality patient care, and social support were the protective factors of WMSDs in the nurses. PMID:29489648

Correlation analysis between work-related musculoskeletal disorders and the nursing practice environment, quality of life, and social support in the nursing professionals.

PubMed

Yan, Ping; Yang, Yi; Zhang, Li; Li, Fuye; Huang, Amei; Wang, Yanan; Dai, Yali; Yao, Hua

2018-03-01

We aim to analyze the correlated influential factors between work-related musculoskeletal disorders (WMSDs) and nursing practice environment and quality of life and social support.From January 2015 to October 2015, cluster sampling was performed on the nurses from 12 hospitals in the 6 areas in Xinjiang. The questionnaires including the modified Nordic Musculoskeletal Questionnaire, Practice Environment Scale (PES), the Mos 36-item Short Form Health Survey, and Social Support Rating Scale were used to investigate. Multivariate logistic regression analysis was used to explore the influential factors of WMSDs.The total prevalence of WMSDs was 79.52% in the nurses ever since the working occupation, which was mainly involved waist (64.83%), neck (61.83%), and shoulder (52.36%). Multivariate logistic regression analysis indicated age (≥26 years), working in the Department of Surgery, Department of Critical Care, Outpatient Department, and Department of Anesthesia, working duration of >40 hours per week were the risk factors of WMSDs in the nurses. The physiological function (PF), body pain, total healthy condition, adequate working force and financial support, and social support were the protective factors of WMSDs.The prevalence of WMSDs in the nurses in Xinjiang Autonomous Region was high. PF, bodily pain, total healthy condition, having adequate staff and support resources to provide quality patient care, and social support were the protective factors of WMSDs in the nurses.

Dynamics of ultrasonic additive manufacturing.

PubMed

Hehr, Adam; Dapino, Marcelo J

2017-01-01

Ultrasonic additive manufacturing (UAM) is a solid-state technology for joining similar and dissimilar metal foils near room temperature by scrubbing them together with ultrasonic vibrations under pressure. Structural dynamics of the welding assembly and work piece influence how energy is transferred during the process and ultimately, part quality. To understand the effect of structural dynamics during UAM, a linear time-invariant model is proposed to relate the inputs of shear force and electric current to resultant welder velocity and voltage. Measured frequency response and operating performance of the welder under no load is used to identify model parameters. Using this model and in-situ measurements, shear force and welder efficiency are estimated to be near 2000N and 80% when welding Al 6061-H18 weld foil, respectively. Shear force and welder efficiency have never been estimated before in UAM. The influence of processing conditions, i.e., welder amplitude, normal force, and weld speed, on shear force and welder efficiency are investigated. Welder velocity was found to strongly influence the shear force magnitude and efficiency while normal force and weld speed showed little to no influence. The proposed model is used to describe high frequency harmonic content in the velocity response of the welder during welding operations and coupling of the UAM build with the welder. Copyright © 2016 Elsevier B.V. All rights reserved.

Influence of non-edible vegetable based oil as cutting fluid on chip, surface roughness and cutting force during drilling operation of Mild Steel

NASA Astrophysics Data System (ADS)

Susmitha, M.; Sharan, P.; Jyothi, P. N.

2016-09-01

Friction between work piece-cutting tool-chip generates heat in the machining zone. The heat generated reduces the tool life, increases surface roughness and decreases the dimensional sensitiveness of work material. This can be overcome by using cutting fluids during machining. They are used to provide lubrication and cooling effects between cutting tool and work piece and cutting tool and chip during machining operation. As a result, important benefits would be achieved such longer tool life, easy chip flow and higher machining quality in the machining processes. Non-edible vegetable oils have received considerable research attention in the last decades owing to their remarkable improved tribological characteristics and due to increasing attention to environmental issues, have driven the lubricant industry toward eco friendly products from renewable sources. In the present work, different non-edible vegetable oils are used as cutting fluid during drilling of Mild steel work piece. Non-edible vegetable oils, used are Karanja oil (Honge), Neem oil and blend of these two oils. The effect of these cutting fluids on chip formation, surface roughness and cutting force are investigated and the results obtained are compared with results obtained with petroleum based cutting fluids and dry conditions.

Using the HSE stress indicator tool in a military context.

PubMed

Bridger, Robert S; Dobson, Karen; Davison, Hannah

2016-01-01

An assessment of the Health and Safety Executive's (HSE) stress indicator tool was conducted to determine whether it was suitable for use with Ministry of Defence (MoD) personnel. A total of 1031 respondents from the Army, Navy, Air Force and MoD civilians completed a questionnaire containing the HSE tool and supplementary measures of work-life balance, engagement, deployment, leave taken and hours of work. Six measures of adverse reaction to the stressors were also reported: perceptions of job stress, job stress and health, psychological strain, fatigue after work, work ability and quality of working life. The stressor scales, particularly the 'demands' and 'relationships' scales, were associated with adverse outcomes as was the work-life balance scale. The HSE tool had some validity when used with MoD personnel, but its content was too narrow. The content validity of the tool can be improved for use in a military context with the addition of a 'work-life balance' scale'. The HSE stress tool was tested with a mixed sample of MoD employees. The ‘Demands and “Relationships” scales were associated with adverse outcomes. An additional Work–Life Balance’ scale improved the content validity, demonstrating the importance of assessing the psychometric qualities of scales when used within particular contexts to ensure validity.

A Comparison between the Second Korean Working Conditions Survey (KWCS) and the First KWCS.

PubMed

Kim, Young Sun; Park, Jungsun; Rhee, Kyung Yong; Kim, Hye Min

2015-06-01

The study was designed to assess the changes in working conditions through a comparative analysis of the characteristics of working conditions in 2006 and 2010. We performed a comparative analysis of the data related to the first Korean Working Conditions Survey (KWCS) and the second KWCS in the categories of demographic characteristics, quality of labor, exposure to hazards, and health problems. From our analysis of the demographic characteristics, we saw an increase in labor force participation rate of women and elderly people. As a result of the investigation with regards to working hours, the ratio of employees who worked for ≥ 49 hours per week was decreased and the ratio of employees who worked for ≥ 40 h/wk increased. As for exposure to hazards, exposure to tobacco smoke notably decreased in 2010 compared with 2006. With regards to health problems, there was a sharp increase in the number of people who complained of muscle pain in their arms and legs. KWCS data included many aspects of working conditions as a nationwide sample. In addition, because this is a periodic nationwide survey, the labor force, working hours, harmful factor exposure, and the change in health problems characteristics according to the flow of time could be investigated. The information comparing the main results of the first survey conducted in 2006 and the second survey conducted in 2010 obtained through this study can be used as an important base material for the establishment of the national policy.

Air pollution and fuel vapour induced changes in lung functions: are fuel handlers safe?

PubMed

Chawla, Anuj; Lavania, A K

2008-01-01

Automobile exhaust derived air pollutants have become a major health hazard. Coupled with the inhalation of fuel vapour, as occurs in petrol station workers, this may lead to significant impairment of lung function. Spirometric lung functions were studied in 58 petrol station workers to examine this possibility. The forced vital capacity (FVC), forced expiratory volume in 1 second (FEV1), forced expiratory flow 25%-75% (FEF25-75) and peak expiratory flow (PEF) were recorded and analysed separately for smokers and non-smokers. The workers were divided into 5 groups for analysis of data based on the number of years of work in the petrol pumps. Outdoor air analysis was also carried out. The FVC, FEV1 and PEF declined significantly with increasing years of work in petrol stations in both smokers and non-smokers. Smoking as an independent variable was found to affect the FEV1 significantly but not FVC or PEF. The FEF25-75 was found to be the most affected spirometric value with a significant reduction with increasing years of work. Smoking as such did not affect it. Oxides of nitrogen (NOx), suspended particulate matter (SPM) and particulate matter less than 10 microns (PM10) in outdoor air were higher than the national ambient air quality standards. Exposure to automobile exhaust and fuel vapour impairs lung function in a time-dependent manner. Cigarette smoking appears to accelerate the decline.

RADC (Rome Air Development Center) System/Software Requirements Engineering Testbed Research and Development Program

DTIC Science & Technology

1988-06-01

analyze requirements to investigate assumptions, decisions , irplications, and requirements quality: (1) expected cost and risk of developing the...the requirements Including the rationale and Implications of decisions that were made. Tool Integration and Evaluation In the Integration and...ly. Instead of stating his needs and making decisions at the mission level, the user is forced to work at a design level or use the English language

SOF/Convention Force Light Footprint Interdependence in Asia and Beyond

DTIC Science & Technology

2013-04-01

risk for food and waterborne illness.47 In many of these isolated rural areas, farming of crops is barely at a subsistence level, and livestock...mostly sheep and goats, compete for food with people. After thirty years of warfare, most modern infrastructure and many traditional institutions...These water sources are often of questionable quality, with animal and human waste run-off contaminating many of them. Men work farm fields to

High quality factor indium oxide mechanical microresonators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartolomé, Javier, E-mail: j.bartolome@fis.ucm.es; Cremades, Ana; Piqueras, Javier

2015-11-09

The mechanical resonance behavior of as-grown In{sub 2}O{sub 3} microrods has been studied in this work by in-situ scanning electron microscopy (SEM) electrically induced mechanical oscillations. Indium oxide microrods grown by a vapor–solid method are naturally clamped to an aluminum oxide ceramic substrate, showing a high quality factor due to reduced energy losses during mechanical vibrations. Quality factors of more than 10{sup 5} and minimum detectable forces of the order of 10{sup −16} N/Hz{sup 1/2} demonstrate their potential as mechanical microresonators for real applications. Measurements at low-vacuum using the SEM environmental operation mode were performed to study the effect ofmore » extrinsic damping on the resonators behavior. The damping coefficient has been determined as a function of pressure.« less

Managing the transcription revolution. Industry forces shape future of field.

PubMed

Faulkner, Scott D

2003-01-01

You may be struggling with contract issues with a vendor. Or maybe you're contemplating the pros and cons of working with outsource, at-home, or overseas transcriptionists. It's a fact: if transcription processes aren't working efficiently, the entire HIM department may be adversely affected. Factor in additional concerns such as data capture for electronic health records, compliance, and patient safety, and the importance of ensuring quality and cost-efficient transcription becomes even more apparent. To help you answer some of these questions, the Journal of AHIMA is launching a four-part series dedicated to transcription issues from the HIM professional's point of view. In this issue, we begin with MTIA president Scott Faulkner's overview of the industry and where it's going next. In upcoming issues, other experts will look at controlling cost and monitoring quality, navigating new technologies, and dealing with contract-related issues.

Europe, women, and work: is the "adult worker" ideal achieved?

PubMed

Montanari, Ingalill

2009-01-01

Against the background of an overall increase in female labor force participation in Europe, this article presents a comparative analysis of the development of the extent and quality of women's participation in market work over the last 15 years in relation to selected sectoral and, with regard to the service sector, subsectoral sites in which women perform their market work. This is an explorative test of the utility of the theoretical perspective that focuses on the gendered division of total necessary work in society, production as well as reproduction, in order to explain gender inequality. Countries examined are the "old E.U." member states in various constellations. Data from the Organization for Economic Cooperation and Development, International Labor Organization, European Social Survey, and Luxembourg Income Study are used.

The application of total quality management principles to spacecraft mission operations

NASA Astrophysics Data System (ADS)

Sweetin, Maury

1993-03-01

By now, the philosophies of Total Quality Management have had an impact on every aspect of American industrial life. The trail-blazing work of Deming, Juran, and Crosby, first implemented in Japan, has 're-migrated' across the Pacific and now plays a growing role in America's management culture. While initially considered suited only for a manufacturing environment, TQM has moved rapidly into the 'service' areas of offices, sales forces, and even fast-food restaurants. The next logical step has also been taken - TQM has found its way into virtually all departments of the Federal Government, including NASA. Because of this widespread success, it seems fair to ask whether this new discipline is directly applicable to the profession of spacecraft operations. The results of quality emphasis on OAO Corporation's contract at JPL provide strong support for Total Quality Management as a useful tool in spacecraft operations.

The application of total quality management principles to spacecraft mission operations

NASA Technical Reports Server (NTRS)

Sweetin, Maury

1993-01-01

By now, the philosophies of Total Quality Management have had an impact on every aspect of American industrial life. The trail-blazing work of Deming, Juran, and Crosby, first implemented in Japan, has 're-migrated' across the Pacific and now plays a growing role in America's management culture. While initially considered suited only for a manufacturing environment, TQM has moved rapidly into the 'service' areas of offices, sales forces, and even fast-food restaurants. The next logical step has also been taken - TQM has found its way into virtually all departments of the Federal Government, including NASA. Because of this widespread success, it seems fair to ask whether this new discipline is directly applicable to the profession of spacecraft operations. The results of quality emphasis on OAO Corporation's contract at JPL provide strong support for Total Quality Management as a useful tool in spacecraft operations.

America's Changing Work Force: Statistics in Brief.

ERIC Educational Resources Information Center

American Association of Retired Persons, Washington, DC.

This booklet provides information about the demographics of the changing work force. It offers an at-a-glance profile of workers age 45 and older and considers likely changes in the work force of the future. The document includes topics such as the composition of the work force of today and tomorrow by age and sex, labor force participation rates,…

Study of Active Micromixer Driven by Electrothermal Force

NASA Astrophysics Data System (ADS)

Huang, Kuan-Rong; Chang, Jeng-Shian; Chao, Sheng D.; Wung, Tzong-Shyan; Wu, Kuang-Chong

2012-04-01

Biochemical applications of microchips often require a rapid mixing of different fluid samples. At the microscale level, fluid flow is usually a highly ordered laminar flow and diffusion is the primary mechanism for mixing owing to the lack of disturbances, yielding inefficiency for practical biochemical analysis. In this work, we design a prototype active micromixer by employing the electrothermal effect. We apply to the flow microchannel a non-uniform AC electric field, which can generate an electrothermal force on the fluid flow and induce vortex pairs for enhancing mixing efficiency. The performance of this active micromixer is studied and compared, under the same mixing quality, with that of a conventional passive micromixer of the same size with obstacles in the flow channel by three-dimensional finite element simulations. The numerical results show that the pressure drop between the inlet and the outlet for the active micromixer is much less than (only 3000th) that for the passive micro-mixer with the same mixing quality. To obtain an optimal mixing quality, we have systematically studied the mixing quality by varying the geometrical arrangements of the electrodes. An almost complete mixing can be obtained using a specific design. Moreover, the temperature increases around the electrodes are lower than 3 K, which does not adversely affect the biochemical analysis. It is suggested that the prototype active micromixer designed is promising and effective and useful for biochemical analysis.

Laboratory tests for assessing adaptability and stickiness of dental composites.

PubMed

Rosentritt, Martin; Buczovsky, Sebastian; Behr, Michael; Preis, Verena

2014-09-01

Handling (stickiness, adaptability) of a dental composite does strongly influence quality and success of a dental restoration. The purpose was to develop an in vitro test, which allows for evaluating adaptability and stickiness. 15 dentists were asked for providing individual assessment (school scores 1-6) of five dental composites addressing adaptability and stickiness. Composites were applied with a dental plugger (d=1.8 mm) in a class I cavity (human tooth 17). The tooth was fixed on a force gauge for simultaneous determination of application forces with varying storage (6/25°C) and application temperatures (6/25°C). On basis of these data tensile tests were performed with a dental plugger (application force 1N/2N; v=35 mm/min) on PMMA- or human tooth plates. Composite was dosed onto the tip of the plugger and applied. Application and unplugging was performed once and unplugging forces (UF) and length of the adhesive flags (LAF) were determined at different storage (6/25°C) and application temperatures (25/37°C). Unplugging work (UW) was calculated from area of UF and LAF data. The individual assessment revealed significantly different temperature-dependent application forces between 0.58 N and 2.23 N. Adaptability was assessed between 2.1 and 2.8 school scores. Stickiness varied significantly between the materials (scores: 2-3.2). UW differed significantly between the materials with values between 3.20 N mm and 37.83 N mm. Between PMMA substrate or tooth slides and between 1N or 2N application force only small UW differences were found. The presented in vitro unplugging work allows for an in vitro estimation of the handling parameters adaptability and stickiness. Copyright © 2014 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Intensive care unit quality improvement: a "how-to" guide for the interdisciplinary team.

PubMed

Curtis, J Randall; Cook, Deborah J; Wall, Richard J; Angus, Derek C; Bion, Julian; Kacmarek, Robert; Kane-Gill, Sandra L; Kirchhoff, Karin T; Levy, Mitchell; Mitchell, Pamela H; Moreno, Rui; Pronovost, Peter; Puntillo, Kathleen

2006-01-01

Quality improvement is an important activity for all members of the interdisciplinary critical care team. Although an increasing number of resources are available to guide clinicians, quality improvement activities can be overwhelming. Therefore, the Society of Critical Care Medicine charged this Outcomes Task Force with creating a "how-to" guide that focuses on critical care, summarizes key concepts, and outlines a practical approach to the development, implementation, evaluation, and maintenance of an interdisciplinary quality improvement program in the intensive care unit. The task force met in person twice and by conference call twice to write this document. We also conducted a literature search on "quality improvement" and "critical care or intensive care" and searched online for additional resources. DATA SYNTHESIS AND OVERVIEW: We present an overview of quality improvement in the intensive care unit setting and then describe the following steps for initiating or improving an interdisciplinary critical care quality improvement program: a) identify local motivation, support teamwork, and develop strong leadership; b) prioritize potential projects and choose the first target; c) operationalize the measures, build support for the project, and develop a business plan; d) perform an environmental scan to better understand the problem, potential barriers, opportunities, and resources for the project; e) create a data collection system that accurately measures baseline performance and future improvements; f) create a data reporting system that allows clinicians and others to understand the problem; g) introduce effective strategies to change clinician behavior. In addition, we identify four steps for evaluating and maintaining this program: a) determine whether the target is changing with periodic data collection; b) modify behavior change strategies to improve or sustain improvements; c) focus on interdisciplinary collaboration; and d) develop and sustain support from the hospital leadership. We also identify a number of online resources to complement this overview. This Society of Critical Care Medicine Task Force report provides an overview for clinicians interested in developing or improving a quality improvement program using a step-wise approach. Success depends not only on committed interdisciplinary work that is incremental and continuous but also on strong leadership. Further research is needed to refine the methods and identify the most cost-effective means of improving the quality of health care received by critically ill patients and their families.

Effect of age and carcass weight on quality traits of m. rectus abdominis from Charolais heifers.

PubMed

Ellies-Oury, M P; Dumont, R; Perrier, G; Roux, M; Micol, D; Picard, B

2017-04-01

In practice cattle may be slaughtered at different combinations of age and weight. As each of these factors could affect meat quality traits, the present work aimed to identify which combination can be expected to increase overall meat quality of m. rectus abdominis of Charolais heifers. Totally, 40 heifers were slaughtered either at 26±1 or at 36±1 months of age. Young heifers were sampled at two different carcass weights (349±12 and 394±8 kg). Old heifers were also sampled at two different carcass weights (397±6 and 451±9 kg). The m. rectus abdominis was excised 24 h postmortem to determine metabolic enzyme activities, myosin heavy-chain isoform proportions, lipid contents, collagen content and collagen solubility. Shear force measurements were evaluated on raw and broiled meat after 14 days of ageing. Meat quality traits scored between 0 and 10 by sensory analysis. Increasing slaughter age from 26 to 36 months had no impact on either raw/broiled shear force (0.31⩽P⩽0.47) and/or meat quality traits (0.62⩽P⩽0.91) or on physicochemical properties of heifer's meat samples. Increasing carcass weight for a similar slaughter age of 26 months had also impact neither on meat quality traits (0.52⩽P⩽0.91) nor on muscular properties. On the contrary, increasing carcass weight for a similar slaughter age of 36 months had induced a decrease of muscular shear force (raw muscle; P=0.009) and a concomitant decrease of total collagen content (P=0.03). Nevertheless, no significant impact on meat quality traits was revealed by the sensorial panel (0.13⩽P⩽0.49). Metabolic enzyme activities (0.13⩽P⩽0.86) and myosin heavy-chain proportions (0.13⩽P⩽0.96) were not significantly impacted by slaughter age and carcass weight. Thus, the impact of increasing carcass weight and/or slaughter age in young Charolais heifers has a limited impact on meat quality traits and associated muscular characteristics. Modulating heifer's cycles (age and/or carcass weight in the studied range) appears to be a way to answer to the numerous marketing chains, without penalising meat quality traits.

How does employment quality relate to health and job satisfaction in Europe? A typological approach.

PubMed

Van Aerden, Karen; Puig-Barrachina, Vanessa; Bosmans, Kim; Vanroelen, Christophe

2016-06-01

The changing nature of employment in recent decades, due to an increased emphasis on flexibility and competitiveness in European labour markets, compels the need to assess the consequences of contemporary employment situations for workers. This article aims to study the relation between the quality of employment and the health and well-being of European workers, using data from the 2010 European Working Conditions Survey. A typology of employment arrangements, mapping out employment quality in the European labour force, is constructed by means of a Latent Class Cluster Analysis. This innovative approach shows that it is possible to condense multiple factors characterising the employment situation into five job types: Standard Employment Relationship-like (SER-like), instrumental, precarious unsustainable, precarious intensive and portfolio jobs. Binary logistic regression analyses show that, controlling for other work quality characteristics, this employment quality typology is related to self-perceived job satisfaction, general health and mental health. Precarious intensive jobs are associated with the worst and SER-like jobs with the best health and well-being situation. The findings presented in this study indicate that, among European wage workers, flexible and de-standardised employment tends to be related to lower job satisfaction, general health and mental health. The quality of employment is thus identified as an important social determinant of health (inequalities) in Europe. Copyright © 2016 Elsevier Ltd. All rights reserved.

1997 Savannah River Site annual epidemiologic surveillance report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This report provides a summary of epidemiologic surveillance data collected from Savannah River Site from January 1, 1997 through December 31, 1997. The data were collected by a coordinator at Savannah River Site and submitted to the Epidemiologic Surveillance Data Center located at Oak Ridge Institute for Science and Education, where quality control procedures and preliminary data analyses were carried out. The analyses were interpreted and the final report prepared by the DOE Office of Epidemiologic Studies. The information in this report provides highlights of the data analyses conducted on the 1997 data collected from Savannah River Site. The mainmore » sections of the report include: work force characteristics; absences due to injury or illness lasting 5 or more consecutive workdays; workplace illnesses, injuries, and deaths that were reportable to the Occupational Safety and Health Administration (''OSHA-recordable'' events); and disabilities and deaths among current workers. The 199 7 report includes a section on time trends that provides comparative information on the health of the work force from 1994 through 1997.« less

1996 Savannah River Site annual epidemiologic surveillance report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This report provides a summary of epidemiologic surveillance data collected from Savannah River Site from January 1, 1996 through December 31, 1996. The data were collected by a coordinator at Savannah River Site and submitted to the Epidemiologic Surveillance Data Center located at Oak Ridge Institute for Science and Education, where quality control procedures and preliminary data analyses were carried out. The analyses were interpreted and the final report prepared by the DOE Office of Epidemiologic Studies. The information in this report provides highlights of the data analyses conducted on the 1996 data collected from Savannah River Site. The mainmore » sections of the report include: work force characteristics; absences due to injury or illness lasting 5 or more consecutive workdays; workplace illnesses, injuries, and deaths that were reportable to the Occupational Safety and Health Administration (''OSHA-recordable'' events); and disabilities and deaths among current workers. The 1996 report includes a new section on time trends that provides comparative information on the health of the work force from 1994 through 1996.« less

The Application of Probabilistic Methods to the Mistuning Problem

NASA Technical Reports Server (NTRS)

Griffin, J. H.; Rossi, M. R.; Feiner, D. M.

2004-01-01

FMM is a reduced order model for efficiently calculating the forced response of a mistuned bladed disk. FMM ID is a companion program which determines the mistuning in a particular rotor. Together, these methods provide a way to acquire data on the mistuning in a population of bladed disks, and then simulate the forced response of the fleet. This process is tested experimentally, and the simulated results are compared with laboratory measurements of a fleet of test rotors. The method is shown to work quite well. It is found that accuracy of the results depends on two factors: the quality of the statistical model used to characterize mistuning, and how sensitive the system is to errors in the statistical modeling.

Recruitment and retention of psychosocial rehabilitation workers.

PubMed

Blankertz, L E; Robinson, S E

1997-01-01

Recruitment and retention of direct service workers can be a major problem for administrators of community mental health organizations. This paper, based on a nationwide study of psychosocial rehabilitation workers and administrators, examines the congruity of worker and administrator perceptions of worker motivation for entering and leaving the field. Workers are motivated by the intrinsic nature of the work to enter into and stay in the field. Job burnout is as important as low pay in forcing workers out of the field. Administrators, however, perceive money to be a major factor motivating workers to enter the field and perceive external opportunities as forces that pull them away. Thus, administrators must address their workers' needs if their agencies are to offer quality services.

KSC-04pd2109

NASA Image and Video Library

2004-10-08

KENNEDY SPACE CENTER, FLA. - Technician Grace Miller-Swales (left) does touch-up work on the Swift spacecraft in Hangar AE at Cape Canaveral Air Force Station. John Batilito, with Quality Assurance Services, is at right. Swift is wrapped with blankets to provide thermal stability during the mission. Swift is a first-of-its-kind multi-wavelength observatory dedicated to the study of gamma-ray burst (GRB) science. Its three instruments will work together to observe GRBs and afterglows in the gamma-ray, X-ray, ultraviolet and optical wavebands. The most comprehensive study of GRB afterglows to date, Swift is expected to observe more than 200 gamma-ray bursts during its 2-year mission.

KSC-04pd2105

NASA Image and Video Library

2004-10-08

KENNEDY SPACE CENTER, FLA. - Quality Assurance Services technicians Willy Jones and Brian Kittle do some touch-up work on the Swift spacecraft in Hangar AE at Cape Canaveral Air Force Station. Swift has been wrapped with blankets to provide thermal stability during the mission. Swift is a first-of-its-kind multi-wavelength observatory dedicated to the study of gamma-ray burst (GRB) science. Its three instruments will work together to observe GRBs and afterglows in the gamma-ray, X-ray, ultraviolet and optical wavebands. The most comprehensive study of GRB afterglows to date, Swift is expected to observe more than 200 gamma-ray bursts during its 2-year mission.

KSC-04pd2108

NASA Image and Video Library

2004-10-08

KENNEDY SPACE CENTER, FLA. - Technician Grace Miller-Swales (left) does touch-up work on the Swift spacecraft in Hangar AE at Cape Canaveral Air Force Station. John DiBatilito, with Quality Assurance Services, is at right. Swift is wrapped with blankets to provide thermal stability during the mission. Swift is a first-of-its-kind multi-wavelength observatory dedicated to the study of gamma-ray burst (GRB) science. Its three instruments will work together to observe GRBs and afterglows in the gamma-ray, X-ray, ultraviolet and optical wavebands. The most comprehensive study of GRB afterglows to date, Swift is expected to observe more than 200 gamma-ray bursts during its 2-year mission.

Drilling resistance: A method to investigate bone quality.

PubMed

Lughmani, Waqas A; Farukh, Farukh; Bouazza-Marouf, Kaddour; Ali, Hassan

2017-01-01

Bone drilling is a major part of orthopaedic surgery performed during the internal fixation of fractured bones. At present, information related to drilling force, drilling torque, rate of drill-bit penetration and drill-bit rotational speed is not available to orthopaedic surgeons, clinicians and researchers as bone drilling is performed manually. This study demonstrates that bone drilling force data if recorded in-vivo, during the repair of bone fractures, can provide information about the quality of the bone. To understand the variability and anisotropic behaviour of cortical bone tissue, specimens cut from three anatomic positions of pig and bovine were investigated at the same drilling speed and feed rate. The experimental results showed that the drilling force does not only vary from one animal bone to another, but also vary within the same bone due to its changing microstructure. Drilling force does not give a direct indication of bone quality; therefore it has been correlated with screw pull-out force to provide a realistic estimation of the bone quality. A significantly high value of correlation (r2 = 0.93 for pig bones and r2 = 0.88 for bovine bones) between maximum drilling force and normalised screw pull-out strength was found. The results show that drilling data can be used to indicate bone quality during orthopaedic surgery.

A Finite-Element Method Model of Soft Tissue Response to Impulsive Acoustic Radiation Force

PubMed Central

Palmeri, Mark L.; Sharma, Amy C.; Bouchard, Richard R.; Nightingale, Roger W.; Nightingale, Kathryn R

2010-01-01

Several groups are studying acoustic radiation force and its ability to image the mechanical properties of tissue. Acoustic radiation force impulse (ARFI) imaging is one modality using standard diagnostic ultrasound scanners to generate localized, impulsive, acoustic radiation forces in tissue. The dynamic response of tissue is measured via conventional ultrasonic speckle-tracking methods and provides information about the mechanical properties of tissue. A finite-element method (FEM) model has been developed that simulates the dynamic response of tissues, with and without spherical inclusions, to an impulsive acoustic radiation force excitation from a linear array transducer. These FEM models were validated with calibrated phantoms. Shear wave speed, and therefore elasticity, dictates tissue relaxation following ARFI excitation, but Poisson’s ratio and density do not significantly alter tissue relaxation rates. Increased acoustic attenuation in tissue increases the relative amount of tissue displacement in the near field compared with the focal depth, but relaxation rates are not altered. Applications of this model include improving image quality, and distilling material and structural information from tissue’s dynamic response to ARFI excitation. Future work on these models includes incorporation of viscous material properties and modeling the ultrasonic tracking of displaced scatterers. PMID:16382621

Attracting the Best. How the Military Competes for Information Technology Personnel

DTIC Science & Technology

2004-01-01

home life. The option to telecommute and a flexible work schedule top the list of low-cost benefits. • The employers create diversity in culture and...rate of promotion. But in the main, the Army did not encourage reclassifying, except for low-density, hard -to-fill specialties, and reclassification...quality recruits. The Army, Navy, and Air Force were hard pressed to meet even their overall numerical targets for recruits, let alone their tar- gets for

Ergodicity and model quality in template-restrained canonical and temperature/Hamiltonian replica exchange coarse-grained molecular dynamics simulations of proteins.

PubMed

Karczyńska, Agnieszka S; Czaplewski, Cezary; Krupa, Paweł; Mozolewska, Magdalena A; Joo, Keehyoung; Lee, Jooyoung; Liwo, Adam

2017-12-05

Molecular simulations restrained to single or multiple templates are commonly used in protein-structure modeling. However, the restraints introduce additional barriers, thus impairing the ergodicity of simulations, which can affect the quality of the resulting models. In this work, the effect of restraint types and simulation schemes on ergodicity and model quality was investigated by performing template-restrained canonical molecular dynamics (MD), multiplexed replica-exchange molecular dynamics, and Hamiltonian replica exchange molecular dynamics (HREMD) simulations with the coarse-grained UNRES force field on nine selected proteins, with pseudo-harmonic log-Gaussian (unbounded) or Lorentzian (bounded) restraint functions. The best ergodicity was exhibited by HREMD. It has been found that non-ergodicity does not affect model quality if good templates are used to generate restraints. However, when poor-quality restraints not covering the entire protein are used, the improved ergodicity of HREMD can lead to significantly improved protein models. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Effect of mandibular advancement device on sleep bruxism score and sleep quality.

PubMed

Solanki, Nehal; Singh, Balendra Pratap; Chand, Pooran; Siddharth, Ramashankar; Arya, Deeksha; Kumar, Lakshya; Tripathi, Suryakant; Jivanani, Hemant; Dubey, Abhishek

2017-01-01

The use of mandibular advancement devices (MADs) in the treatment of sleep bruxism is gaining widespread importance. However, the effects of MADs on sleep bruxism scores, sleep quality, and occlusal force are not clear. The purpose of this clinical study was to analyze the effect of MADs on sleep bruxism scores, sleep quality, and occlusal force. This uncontrolled before and after study enrolled 30 participants with sleep bruxism. Outcomes assessed were sleep quality, sleep bruxism scores (sleep bruxism bursts and sleep bruxism episodes/hour), and occlusal force before and after 15 and 30 days of using a MAD. Sleep bruxism scores were assessed by ambulatory polysomnography and sleep quality by using the Pittsburgh sleep quality index (PSQI). Occlusal force was recorded by using a digital gnathodynamometer in the first molar region on both sides. Statistical analysis was done by 1-factor repeated measures ANOVA (α=.05). Statistically significant reductions in sleep bruxism bursts/h, sleep bruxism episodes/h, and PSQI scores were found after 15 and 30 days of using a MAD (P<.001). Statistically significant reduction in occlusal force on both sides was found only after 15 days (P<.001) but not after 30 days of using a MAD (P=.292 on left side, and P=.575 on the right side). The study showed a short-term improvement in sleep bruxism scores, sleep quality, and reduction in occlusal force in sleep bruxism participants after using MADs. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Polydimethylsiloxane pressure sensors for force analysis in tension band wiring of the olecranon.

PubMed

Zens, Martin; Goldschmidtboeing, Frank; Wagner, Ferdinand; Reising, Kilian; Südkamp, Norbert P; Woias, Peter

2016-11-14

Several different surgical techniques are used in the treatment of olecranon fractures. Tension band wiring is one of the most preferred options by surgeons worldwide. The concept of this technique is to transform a tensile force into a compression force that adjoins two surfaces of a fractured bone. Currently, little is known about the resulting compression force within a fracture. Sensor devices are needed that directly transduce the compression force into a measurement quality. This allows the comparison of different surgical techniques. Ideally the sensor devices ought to be placed in the gap between the fractured segments. The design, development and characterization of miniaturized pressure sensors fabricated entirely from polydimethylsiloxane (PDMS) for a placement within a fracture is presented. The pressure sensors presented in this work are tested, calibrated and used in an experimental in vitro study. The pressure sensors are highly sensitive with an accuracy of approximately 3 kPa. A flexible fabrication process for various possible applications is described. The first in vitro study shows that using a single-twist or double-twist technique in tension band wiring of the olecranon has no significant effect on the resulting compression forces. The in vitro study shows the feasibility of the proposed measurement technique and the results of a first exemplary study.

The principles of quality-associated costing: derivation from clinical transfusion practice.

PubMed

Trenchard, P M; Dixon, R

1997-01-01

As clinical transfusion practice works towards achieving cost-effectiveness, prescribers of blood and its derivatives must be certain that the prices of such products are based on real manufacturing costs and not market forces. Using clinical cost-benefit analysis as the context for the costing and pricing of blood products, this article identifies the following two principles: (1) the product price must equal the product cost (the "price = cost" rule) and (2) the product cost must equal the real cost of product manufacture. In addition, the article describes a new method of blood product costing, quality-associated costing (QAC), that will enable valid cost-benefit analysis of blood products.

Growth of single-layer graphene on Ge (1 0 0) by chemical vapor deposition

NASA Astrophysics Data System (ADS)

Mendoza, C. D.; Caldas, P. G.; Freire, F. L.; Maia da Costa, M. E. H.

2018-07-01

The integration of graphene into nanoelectronic devices is dependent on the availability of direct deposition processes, which can provide uniform, large-area and high-quality graphene on semiconductor substrates such as Ge or Si. In this work, we synthesised graphene directly on p-type Ge (1 0 0) substrates by chemical vapour deposition. The influence of the CH4:H2 flow ratio on the graphene growth was investigated. Raman Spectroscopy, Raman mapping, Scanning Electron Microscopy, Atomic Force Microscopy and Scanning Tunnelling Microscopy/Scanning Tunnelling Spectroscopy results showed that good quality and homogeneous monolayer graphene over a large area can be achieved on Ge substrates directly with optimal growth conditions.

EM-1 Booster Prep, Left Aft Skirt Work-In-Progress

NASA Image and Video Library

2016-10-30

Inside the Booster Fabrication Facility at NASA's Kennedy Space Center in Florida, the left hand aft skirt for the agency's Space Launch System (SLS) rocket is ready for the assembly process. From left, are Chad Goetz, quality technician with Orbital ATK, and Robbie Blaue, quality assurance specialist with the Defense Contract Management Agency. The aft skirt was refurbished and painted in support facilities at the Hangar AF facility at Cape Canaveral Air Force Station in Florida. The space shuttle-era aft skirt will be used on the left hand booster of the SLS for Exploration Mission 1 (EM-1). NASA is preparing for EM-1, deep space missions, and the Journey to Mars.

Enhanced quality factors and force sensitivity by attaching magnetic beads to cantilevers for atomic force microscopy in liquid

NASA Astrophysics Data System (ADS)

Hoof, Sebastian; Nand Gosvami, Nitya; Hoogenboom, Bart W.

2012-12-01

Dynamic-mode atomic force microscopy (AFM) in liquid remains complicated due to the strong viscous damping of the cantilever resonance. Here, we show that a high-quality resonance (Q >20) can be achieved in aqueous solution by attaching a microgram-bead at the end of the nanogram-cantilever. The resulting increase in cantilever mass causes the resonance frequency to drop significantly. However, the force sensitivity—as expressed via the minimum detectable force gradient—is hardly affected, because of the enhanced quality factor. Through the enhancement of the quality factor, the attached bead also reduces the relative importance of noise in the deflection detector. It can thus yield an improved signal-to-noise ratio when this detector noise is significant. We describe and analyze these effects for a set-up that includes magnetic actuation of the cantilevers and that can be easily implemented in any AFM system that is compatible with an inverted optical microscope.

The New Work Force. Trends and Issues Alerts.

ERIC Educational Resources Information Center

Imel, Susan

During the last years of this century, the work force will grow more slowly, becoming older, more female, and more disadvantaged. An increasing number of minority groups and immigrants will enter the work force. Despite public demands for reform, education lags behind in preparing youth for employment. The changing work force has many implications…

Radiation protection program for early detection of breast cancer in a mammography facility

NASA Astrophysics Data System (ADS)

Villagomez Casimiro, Mariana; Ruiz Trejo, Cesar; Espejo Fonseca, Ruby

2014-11-01

Mammography is the best tool for early detection of Breast Cancer. In this diagnostic radiology modality it is necessary to establish the criteria to ensure the proper use and operation of the equipment used to obtain mammographic images in order to contribute to the safe use of ionizing radiation. The aim of the work was to implement at FUCAM-AC the radiation protection program which must be established for patients and radiation workers according to Mexican standards [1-4]. To achieve this goal, radiation protection and quality control manuals were elaborated [5]. Furthermore, a quality control program (QCP) in the mammography systems (analog/digital), darkroom included, has been implemented. Daily sensitometry, non-variability of the image quality, visualizing artifacts, revision of the equipment mechanical stability, compression force and analysis of repetition studies are some of the QCP routine tests that must be performed by radiological technicians of this institution as a set of actions to ensure the protection of patients. Image quality and patients dose assessment were performed on 4 analog equipment installed in 2 mobile units. In relation to dose assessment, all equipment passed the acceptance criteria (<3 mGy per projection). The image quality test showed that most images (70%)- presented artifacts. A brief summary of the results of quality control tests applied to the equipment and film processor are presented. To maintain an adequate level of quality and safety at FUCAM-AC is necessary that the proposed radiation protection program in this work is applied.

Design and Testing of an Air Force Services Mystery Shopping Program.

DTIC Science & Technology

1998-11-01

Base level Air Force Services’ lodging and foodservice activities use limited service quality measurement tools to determine customer perceptions of... service quality . These tools, specifically management observation and customer comment cards, do not provide a complete picture of service quality . Other... service quality measurement methods such as mystery shopping are rarely used. Bases do not consider using mystery shopping programs because of the

Male great bowerbirds create forced perspective illusions with consistently different individual quality

PubMed Central

Kelley, Laura A.; Endler, John A.

2012-01-01

Males often produce elaborate displays that increase their attractiveness to females, and some species extend their displays to include structures or objects that are not part of their body. Such “extended phenotypes” may communicate information that cannot be transmitted by bodily signals or may provide a more reliable signal than bodily signals. However, it is unclear whether these signals are individually distinct and whether they are consistent over long periods of time. Male bowerbirds construct and decorate bowers that function in mate choice. Bower display courts constructed by male great bowerbirds (Ptilonorhynchus nuchalis) induce a visual illusion known as forced perspective for the female viewing the male’s display over the court, and the quality of illusion is associated with mating success. We improved the quality of the forced perspective to determine whether males maintained it at the new higher level, decreased the perspective quality back to its original value, or allowed it to decay at random over time. We found that the original perspective quality was actively recovered to individual original values within 3 d. We measured forced perspective over the course of one breeding season and compared the forced perspective of individual males between two successive breeding seasons. We found that differences in the quality of visual illusion among males were consistent within and between two breeding seasons. This suggests that forced perspective is actively and strongly maintained at a different level by each individual male. PMID:23213203

The analysis of ball's motion in the torus-shaped autoequalizer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strautmanis, Guntis, E-mail: Guntis@df.rtu.lv; Jurjev, Vadims, E-mail: vadimsjurjevs@gmail.com; Grinevich, Ivans, E-mail: ivansgrinevics@inbox.lv

2013-12-16

The reduction of vibrations in rotary systems is necessary condition for the development of constructions with high quality requirements. Among the devices that are able to reduce rotor's vibrations are automatic balancers with balls, liquid, etc. Autoequalizers with torus-shaped body contain one ball-shaped adjustment mass that can freely roll both in the ring direction and in the cross section. This enables reducing to the minimum the force of resistance at the ball's moving, but simultaneously decreases the chance of launching the autoequalizer in the autobalancing regime. It has been stated that the ball in the working state is influenced bymore » forces that are aimed at moving it in the body of the autoequalizer towards the side opposite to the imbalance. The design of an autoequalizer that ensures working state in which at rotation the ball stops relative to the autoequalizer's body opposite to the imbalance has been experimentally worked out. The autoequalizer is made up of the mathematical model with two differential equations. In the result of the calculations it has been proved that the ball of an equalizer with the torus-shaped body has at least two movement conditions one of which is a working state, and another one is a spare state.« less

Health problems and stress in Information Technology and Business Process Outsourcing employees.

PubMed

Padma, V; Anand, N N; Gurukul, S M G Swaminatha; Javid, S M A Syed Mohammed; Prasad, Arun; Arun, S

2015-04-01

Stress is high in software profession because of their nature of work, target, achievements, night shift, over work load. 1. To study the demographic profile of the employees. 2. To access the level of job stress and quality of life of the respondents. 3. To study in detail the health problems of the employees. All employees working in IT and BPO industry for more than two years were included into the study. A detailed questionnaire of around 1000 IT and BPO employees including their personal details, stress score by Holmes and Rahe to assess the level of stress and master health checkup profile were taken and the results were analysed. Around 56% had musculoskeletal symptoms. 22% had newly diagnosed hypertension,10% had diabetes, 36% had dyslipidemia, 54% had depression, anxiety and insomnia, 40% had obesity. The stress score was higher in employees who developed diabetes, hypertension and depression. Early diagnosis of stress induced health problems can be made out by stress scores, intense lifestyle modification, diet advice along with psychological counselling would reduce the incidence of health problems in IT sector and improve the quality of work force.

Health problems and stress in Information Technology and Business Process Outsourcing employees

PubMed Central

Padma, V.; Anand, N. N.; Gurukul, S. M. G. Swaminatha; Javid, S. M. A. Syed Mohammed; Prasad, Arun; Arun, S.

2015-01-01

Stress is high in software profession because of their nature of work, target, achievements, night shift, over work load. 1. To study the demographic profile of the employees. 2. To access the level of job stress and quality of life of the respondents. 3. To study in detail the health problems of the employees. All employees working in IT and BPO industry for more than two years were included into the study. A detailed questionnaire of around 1000 IT and BPO employees including their personal details, stress score by Holmes and Rahe to assess the level of stress and master health checkup profile were taken and the results were analysed. Around 56% had musculoskeletal symptoms. 22% had newly diagnosed hypertension,10% had diabetes, 36% had dyslipidemia, 54% had depression, anxiety and insomnia, 40% had obesity. The stress score was higher in employees who developed diabetes, hypertension and depression. Early diagnosis of stress induced health problems can be made out by stress scores, intense lifestyle modification, diet advice along with psychological counselling would reduce the incidence of health problems in IT sector and improve the quality of work force. PMID:26015763

Effects of different force fields on the structural character of α synuclein β-hairpin peptide (35-56) in aqueous environment.

PubMed

Kundu, Sangeeta

2018-02-01

The hallmark of Parkinson's disease (PD) is the intracellular protein aggregation forming Lewy Bodies (LB) and Lewy neuritis which comprise mostly of a protein, alpha synuclein (α-syn). Molecular dynamics (MD) simulation methods can augment experimental techniques to understand misfolding and aggregation pathways with atomistic resolution. The quality of MD simulations for proteins and peptides depends greatly on the accuracy of empirical force fields. The aim of this work is to investigate the effects of different force fields on the structural character of β hairpin fragment of α-syn (residues 35-56) peptide in aqueous solution. Six independent MD simulations are done in explicit solvent using, AMBER03, AMBER99SB, GROMOS96 43A1, GROMOS96 53A6, OPLS-AA, and CHARMM27 force fields with CMAP corrections. The performance of each force field is assessed from several structural parameters such as root mean square deviation (RMSD), root mean square fluctuation (RMSF), radius of gyration (Rg), solvent accessible surface area (SASA), formation of β-turn, the stability of folded β-hairpin structure, and the favourable conformations obtained for different force fields. In this study, CMAP correction of CHARMM27 force field is found to overestimate the helical conformation, while GROMOS96 53A6 is found to most successfully capture the conformational dynamics of α-syn β-hairpin fragment as elicited from NMR.

Documenting quality improvement and patient safety efforts: the quality portfolio. A statement from the academic hospitalist taskforce.

PubMed

Taylor, Benjamin B; Parekh, Vikas; Estrada, Carlos A; Schleyer, Anneliese; Sharpe, Bradley

2014-01-01

Physicians increasingly investigate, work, and teach to improve the quality of care and safety of care delivery. The Society of General Internal Medicine Academic Hospitalist Task Force sought to develop a practical tool, the quality portfolio, to systematically document quality and safety achievements. The quality portfolio was vetted with internal and external stakeholders including national leaders in academic medicine. The portfolio was refined for implementation to include an outlined framework, detailed instructions for use and an example to guide users. The portfolio has eight categories including: (1) a faculty narrative, (2) leadership and administrative activities, (3) project activities, (4) education and curricula, (5) research and scholarship, (6) honors, awards, and recognition, (7) training and certification, and (8) an appendix. The authors offer this comprehensive, yet practical tool as a method to document quality and safety activities. It is relevant for physicians across disciplines and institutions and may be useful as a standalone document or as an adjunct to traditional promotion documents. As the Next Accreditation System is implemented, academic medical centers will require faculty who can teach and implement the systems-based practice requirements. The quality portfolio is a method to document quality improvement and safety activities.

Performance and management of draught animals in agriculture in sub-Saharan Africa: a review.

PubMed

Pearson, R A; Vall, E

1998-10-01

Use of animal power generally enables farmers in sub-Saharan Africa to increase agricultural production and improve the quality of life. Effective use of working animals depends on an understanding of the capabilities of the animals for work, their husbandry requirements and the factors which can influence their performance. These issues are reviewed in this paper in the context of the use of animal power in agriculture in sub-Saharan Africa. The type of animal used for work determines power available to the farmer. The performance of donkeys, horses and cattle have been compared in work tests. Equids are more suited to rapid low draught activities where their faster speed can be used to advantage. At higher draught forces, where speed is less important, the additional weight and power of cattle are an advantage. Use of heart rate recovery after work gives a reasonable indication of fatigue and fitness of equids, when test conditions are standardized. Although feed requirements for work are generally low, feed quality can be so poor that animals are unable to eat enough to meet energy needs for work, and so lose weight during the work season. However, improvements in work performance are not always seen following supplementary feeding in the dry season and the economics need to be considered in each case. Food availability, diseases and heat stress, the major constraints to performance of draught cattle and donkeys working in sub-Saharan Africa, are discussed.

WE-G-BRF-09: Force- and Image-Adaptive Strategies for Robotised Placement of 4D Ultrasound Probes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuhlemann, I; Graduate School for Computing in Life Science, University of Luebeck, Luebeck; Bruder, R

2014-06-15

Purpose: To allow continuous acquisition of high quality 4D ultrasound images for non-invasive live tracking of tumours for IGRT, image- and force-adaptive strategies for robotised placement of 4D ultrasound probes are developed and evaluated. Methods: The developed robotised ultrasound system is based on a 6-axes industrial robot (adept Viper s850) carrying a 4D ultrasound transducer with a mounted force-torque sensor. The force-adaptive placement strategies include probe position control using artificial potential fields and contact pressure regulation by a PD controller strategy. The basis for live target tracking is a continuous minimum contact pressure to ensure good image quality and highmore » patient comfort. This contact pressure can be significantly disturbed by respiratory movements and has to be compensated. All measurements were performed on human subjects under realistic conditions. When performing cardiac ultrasound, rib- and lung shadows are a common source of interference and can disrupt the tracking. To ensure continuous tracking, these artefacts had to be detected to automatically realign the probe. The detection is realised by multiple algorithms based on entropy calculations as well as a determination of the image quality. Results: Through active contact pressure regulation it was possible to reduce the variance of the contact pressure by 89.79% despite respiratory motion of the chest. The results regarding the image processing clearly demonstrate the feasibility to detect image artefacts like rib shadows in real-time. Conclusion: In all cases, it was possible to stabilise the image quality by active contact pressure control and automatically detected image artefacts. This fact enables the possibility to compensate for such interferences by realigning the probe and thus continuously optimising the ultrasound images. This is a huge step towards fully automated transducer positioning and opens the possibility for stable target tracking in ultrasoundguided radiation therapy requiring contact pressure of 5–10 N. This work was supported by the Graduate School for Computing in Medicine and Life Sciences funded by Germany's Excellence Initiative [DFG GSC 235/1].« less

Precarious existence and deteriorating work conditions for women in India: implications for health.

PubMed

Swaminathan, Padmini

2007-01-01

The Indian economy has experienced economic growth post-1991 but has demonstrated an inability to generate adequate employment and even less of "quality" employment for much of its labor force. This article is based on data collected from conversations with women workers on the theme of "women, work and health," with an emphasis on, one, task allotment and working conditions in the household; and two, those related to conditions of work at the worksite and the gendered experience of such work. While narratives cannot establish causality between particular work environments and related adverse outcomes, they nevertheless provide crucial insights into what is likely to be blighting these women's lives. Advocates of women's work outside their home need to pay attention to both their remuneration for work and the costs to their health and well-being of such employment, so that policies aimed at employment generation also are sensitive to the adverse outcomes of such employment.

48 CFR 252.223-7004 - Drug-free work force.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Drug-free work force. 252... Provisions And Clauses 252.223-7004 Drug-free work force. As prescribed in 223.570-2, use the following clause: Drug-Free Work Force (SEP 1988) (a) Definitions. (1) Employee in a sensitive position, as used in...

48 CFR 252.223-7004 - Drug-free work force.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Drug-free work force. 252... Provisions And Clauses 252.223-7004 Drug-free work force. As prescribed in 223.570-2, use the following clause: Drug-Free Work Force (SEP 1988) (a) Definitions. (1) Employee in a sensitive position, as used in...

48 CFR 252.223-7004 - Drug-free work force.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Drug-free work force. 252... Provisions And Clauses 252.223-7004 Drug-free work force. As prescribed in 223.570-2, use the following clause: Drug-Free Work Force (SEP 1988) (a) Definitions. (1) Employee in a sensitive position, as used in...

48 CFR 252.223-7004 - Drug-free work force.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Drug-free work force. 252... Provisions And Clauses 252.223-7004 Drug-free work force. As prescribed in 223.570-2, use the following clause: Drug-Free Work Force (SEP 1988) (a) Definitions. (1) Employee in a sensitive position, as used in...

48 CFR 252.223-7004 - Drug-free work force.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Drug-free work force. 252... Provisions And Clauses 252.223-7004 Drug-free work force. As prescribed in 223.570-2, use the following clause: Drug-Free Work Force (SEP 1988) (a) Definitions. (1) Employee in a sensitive position, as used in...

40 CFR 35.936-14 - Force account work.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Force account work. 35.936-14 Section... Force account work. (a) A grantee must secure the project officer's prior written approval for use of the force account method for (1) any step 1 or step 2 work in excess of $10,000; (2) any sewer...

Analytic nuclear forces and molecular properties from full configuration interaction quantum Monte Carlo

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, Robert E.; Overy, Catherine; Opalka, Daniel

Unbiased stochastic sampling of the one- and two-body reduced density matrices is achieved in full configuration interaction quantum Monte Carlo with the introduction of a second, “replica” ensemble of walkers, whose population evolves in imaginary time independently from the first and which entails only modest additional computational overheads. The matrices obtained from this approach are shown to be representative of full configuration-interaction quality and hence provide a realistic opportunity to achieve high-quality results for a range of properties whose operators do not necessarily commute with the Hamiltonian. A density-matrix formulated quasi-variational energy estimator having been already proposed and investigated, themore » present work extends the scope of the theory to take in studies of analytic nuclear forces, molecular dipole moments, and polarisabilities, with extensive comparison to exact results where possible. These new results confirm the suitability of the sampling technique and, where sufficiently large basis sets are available, achieve close agreement with experimental values, expanding the scope of the method to new areas of investigation.« less

Effect of repeated compaction of tablets on tablet properties and work of compaction using an instrumented laboratory tablet press.

PubMed

Gamlen, Michael John Desmond; Martini, Luigi G; Al Obaidy, Kais G

2015-01-01

The repeated compaction of Avicel PH101, dicalcium phosphate dihydrate (DCP) powder, 50:50 DCP/Avicel PH101 and Starch 1500 was studied using an instrumented laboratory tablet press which measures upper punch force, punch displacement and ejection force and operates using a V-shaped compression profile. The measurement of work compaction was demonstrated, and the test materials were ranked in order of compaction behaviour Avicel PH101 > DCP/Avicel PH101 > Starch > DCP. The behaviour of the DCP/Avicel PH101 mixture was distinctly non-linear compared with the pure components. Repeated compaction and precompression had no effect on the tensile fracture strength of Avicel PH101 tablets, although small effects on friability and disintegration time were seen. Repeated compaction and precompression reduced the tensile strength and the increased disintegration time of the DCP tablets, but improved the strength and friability of Starch 1500 tablets. Based on the data reported, routine laboratory measurement of tablet work of compaction may have potential as a critical quality attribute of a powder blend for compression. The instrumented press was suitable for student use with minimal supervisor input.

Older adults' perceptions of work.

PubMed

Bambrick, Patricia; Bonder, Bette

2005-01-01

Traditional definitions of work may not reflect the activities of older adults. A broader definition that incorporates non-economic as well as economic measures may better describe their participation in the labor force and the meanings they ascribe to these activities. Because productive activity has been linked to successful aging, it is important to understand how elders perceive work. Twenty-six community-residing older adults were interviewed over a two-year period. Participants were mostly female and represented diverse cultural, religious and educational backgrounds. All these individuals participated in some activities they perceived as work. Three themes emerged as describing their attributions of meaning or importance to productive activities: contribution to self-concept, giving back to community, and staying engaged. Findings suggest that the productive activities of older adults contribute to quality of life for them and have implications for society as well.

Factors influencing nurses' perceptions of occupational safety.

PubMed

Samur, Menevse; Intepeler, Seyda Seren

2017-01-02

To determine nurses' perceptions of occupational safety and their work environment and examine the sociodemographic traits and job characteristics that influence their occupational safety, we studied a sample of 278 nurses. According to the nurses, the quality of their work environment is average, and occupational safety is insufficient. In the subdimensions of the work environment scale, it was determined that the nurses think "labor force and other resources" are insufficient. In the occupational safety subdimensions "occupational illnesses and complaints" and "administrative support and approaches," they considered occupational safety to be insufficient. "Doctor-nurse-colleague relationships," "exposure to violence," and "work unit" (eg, internal medicine, surgical, intensive care) are the main factors that affect occupational safety. This study determined that hospital administrations should develop and immediately implement plans to ameliorate communication and clinical precautions and to reduce exposure to violence.

Fertility and work-force participation: The experience of Melbourne Wives.

PubMed

Ware, H

1976-11-01

Summary Current and retrospective data on the fertility control, work-force participation intentions and practice of Melbourne wives are combined in an examination of the causal link between work-force participation and reduced family size. Stress is laid on the analysis of the interaction between work-force participation and fertility over time, taking into account the proportion of married life spent in the work-force, rather than relying exclusively on a measure of current participation, the only option available in the analysis of census-type data. The wide range of information available makes it possible to study the effects of work-force participation on wives of unimpaired fertility, as well as the different consequences of planned and unplanned participation, and of working in a variety of occupations and for a number of distinct reasons. Examination of the future fertility intentions and current contraceptive practice of the younger wives shows that working wives are not, in these respects, markedly different from their house-wife peers. Overall, the balance of the evidence indicates that in the majority of cases fertility influences work-force participation rather than the converse.

Validation of the North American Land Data Assimilation System (NLDAS) retrospective forcing over the southern Great Plains

NASA Astrophysics Data System (ADS)

Luo, Lifeng; Robock, Alan; Mitchell, Kenneth E.; Houser, Paul R.; Wood, Eric F.; Schaake, John C.; Lohmann, Dag; Cosgrove, Brian; Wen, Fenghua; Sheffield, Justin; Duan, Qingyun; Higgins, R. Wayne; Pinker, Rachel T.; Tarpley, J. Dan

2003-11-01

Atmospheric forcing used by land surface models is a critical component of the North American Land Data Assimilation System (NLDAS) and its quality crucially affects the final product of NLDAS and our work on model improvement. A three-year (September 1996-September 1999) retrospective forcing data set was created from the Eta Data Assimilation System and observations and used to run the NLDAS land surface models for this period. We compared gridded NLDAS forcing with station observations obtained from networks including the Oklahoma Mesonet and Atmospheric Radiation Measurement/Cloud and Radiation Testbed at the southern Great Plains. Differences in all forcing variables except precipitation between the NLDAS forcing data set and station observations are small at all timescales. While precipitation data do not agree very well at an hourly timescale, they do agree better at longer timescales because of the way NLDAS precipitation forcing is generated. A small high bias in downward solar radiation and a low bias in downward longwave radiation exist in the retrospective forcing. To investigate the impact of these differences on land surface modeling we compared two sets of model simulations, one forced by the standard NLDAS product and one with station-observed meteorology. The differences in the resulting simulations of soil moisture and soil temperature for each model were small, much smaller than the differences between the models and between the models and observations. This indicates that NLDAS retrospective forcing provides an excellent state-of-the-art data set for land surface modeling, at least over the southern Great Plains region.

Work Force Information and Career-Technical Education. In Brief: Fast Facts for Policy and Practice No. 10.

ERIC Educational Resources Information Center

Sommers, Dixie

To prepare young people and adults for labor market success, career-technical education (CTE) practitioners must know how to find and use work force information. Recent federal legislation, including the Workforce Investment Act of 1998, underscores the importance of work force education. The nationwide work force information system makes data on…

A socioecological analysis of the determinants of national public health nutrition work force capacity: Australia as a case study.

PubMed

Hughes, Roger

2006-01-01

This article uses a socioecological analytical approach to assess the capacity of the public health nutrition work force in Australia as a prelude to work force development strategy planning. It demonstrates how the socioecological model can be used to assess and inform the development of the infrastructure required for effective public health nutrition effort. An interpretive case study method was used involving triangular analysis of quantitative and qualitative data from multiple sources including semistructured interviews with advanced-level practitioners, literature review, a cross-sectional national work force survey, and position description audit and consensus development using a Delphi study. The findings of this analysis indicate that the Australian public health nutrition work force's capacity to effectively address priority nutrition issues is limited by determinants that can be categorized as relating to human resource infrastructure, organizational and policy environments, intelligence access and use, practice improvement and learning systems, and work force preparation. This socioecological analysis supports an intelligence-based focus for work force development effort in Australia and a conceptual framework for work force capacity assessment with potential applications in other countries.

Target: Alcohol Abuse in the Hard-to-Reach Work Force. Ideas and Resources for Responding to Problems of the Hard-to-Reach Work Force.

ERIC Educational Resources Information Center

Informatics, Inc., Rockville, MD.

This guide is designed as a source of ideas and information for individuals and organizations interested in occupational alcoholism programs for the hard-to-reach work force. Following a brief overview of the problem and a report on progress in occupational alcoholism programming, a working definition of the hard-to-reach work force is offered;…

Evaluating a community-based program to improve healthcare quality: research design for the Aligning Forces for Quality initiative.

PubMed

Scanlon, Dennis P; Alexander, Jeffrey A; Beich, Jeff; Christianson, Jon B; Hasnain-Wynia, Romana; McHugh, Megan C; Mittler, Jessica N; Shi, Yunfeng; Bodenschatz, Laura J

2012-09-01

The Aligning Forces for Quality (AF4Q) initiative is the Robert Wood Johnson Foundation's (RWJF's) signature effort to increase the overall quality of healthcare in targeted communities throughout the country. In addition to sponsoring this 16-site, complex program, the RWJF funds an independent scientific evaluation to support objective research on the initiative's effectiveness and contributions to basic knowledge in 5 core programmatic areas. The research design, data, and challenges faced in the evaluation of this 10-year initiative are discussed. A descriptive overview of the evaluation research design for a multi-site, community based, healthcare quality improvement initiative is provided. The multiphase research design employed by the evaluation team is discussed. Evaluation provides formative feedback to the RWJF, participants, and other interested audiences in real time; develops approaches to assess innovative and under-studied interventions; furthers the analysis and understanding of effective community-based collaborative work in healthcare; and helps to differentiate the various facilitators, barriers, and contextual dimensions that affect the implementation and outcomes of community-based health interventions. The AF4Q initiative is arguably the largest community-level healthcare improvement demonstration in the United States to date; it is being implemented at a time of rapid change in national healthcare policy. The implementation of large-scale, multi-site initiatives is becoming an increasingly common approach for addressing problems in healthcare. The evaluation research design for the AF4Q initiative, and the lessons learned from its approach, may be valuable to others tasked with evaluating similar community-based initiatives.

JPRS Report, China, Red Flag, Number 6, 16 March 1988

DTIC Science & Technology

1988-05-26

as published] It Is Necessary To Seriously Implement the Principle of Democracy in Work Concerning Cadres [Zhu YanJ T^""\\’- 7T""^ I \\ Increase ...persist in taking the mass line, to carry forward socialist democracy, to increase the degree of opening up, and to enable the masses inside and...34disclose the whole inside story." Increase Enterprises’ Internal Driving Force of Paying Attention to Variety and Quality 40050207b Beijing HONGQI

“Hidden” threats to science education

NASA Astrophysics Data System (ADS)

Huntoon, J. E.; Buchanan, R.; Buhr, S. M.; Kirst, S.; Newton, S.; Van Norden, W.

2012-04-01

Many readers of Eos are involved with education. Most would agree that what happens at precollege levels will ultimately affect the geoscience profession; after all, future scientists are today's precollege students. While a growing number of scientists are working to improve the quality of precollege programs, only a few are addressing what we term the "hidden" threats to science education. Hidden threats have nothing to do with scientific content; rather, they result from social, political, and bureaucratic forces operating within and outside of schools and universities.

Hearings on Reform of the U.S. Workforce Preparation System. Hearings before the Subcommittee on Postsecondary Education, Training, and Life-Long Learning of the Committee on Economic and Educational Opportunities, House of Representatives, One Hundred Fourth Congress, First Session (February 6-7, 1995).

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Economic and Educational Opportunities.

This publication presents two hearings on how to establish and maintain a streamlined, top quality, and efficient system of work force preparation in the United States and the role of the federal government in developing such a system. Testimony consists of statements and prepared statements, letters, and supplemental materials from individuals…

Installation Restoration Program. Phase II. Confirmation/Quantification Stage 1 for Nellis Air Force Base, Nevada.

DTIC Science & Technology

1985-08-09

chemicals from the sample, thereby preventing any effects on sample chemistry and cross-contamination of subsequent samples. The laboratory quality...14 Top 3011 4 16 1 Ca 1 ch4DChief ’aquifer (water-ticurinr 16 69 53 i Lrowm clay fo.mation) L 69 1 74 5 . atar oaandand ,ravei from..0.to .750. 74 1 127...significant fraction of the Chemistry Department’s work involves data processing. Mathematical models, based upon analysis of standard solutions or

76 FR 27003 - Notice of Meeting of the Agricultural Air Quality Task Force

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-10

... Task Force (AAQTF) will meet to continue discussions on critical air quality issues in relation to... between agricultural production and air quality. The meeting is open to the public, and a draft agenda is... Designations F. Next Meeting, time/place Public Input (Time will be reserved at designated times to receive...

Energetic costs of producing muscle work and force in a cyclical human bouncing task

PubMed Central

Kuo, Arthur D.

2011-01-01

Muscles expend energy to perform active work during locomotion, but they may also expend significant energy to produce force, for example when tendons perform much of the work passively. The relative contributions of work and force to overall energy expenditure are unknown. We therefore measured the mechanics and energetics of a cyclical bouncing task, designed to control for work and force. We hypothesized that near bouncing resonance, little work would be performed actively by muscle, but the cyclical production of force would cost substantial metabolic energy. Human subjects (n = 9) bounced vertically about the ankles at inversely proportional frequencies (1–4 Hz) and amplitudes (15–4 mm), such that the overall rate of work performed on the body remained approximately constant (0.30 ± 0.06 W/kg), but the forces varied considerably. We used parameter identification to estimate series elasticity of the triceps surae tendon, as well as the work performed actively by muscle and passively by tendon. Net metabolic energy expenditure for bouncing at 1 Hz was 1.15 ± 0.31 W/kg, attributable mainly to active muscle work with an efficiency of 24 ± 3%. But at 3 Hz (near resonance), most of the work was performed passively, so that active muscle work could account for only 40% of the net metabolic rate of 0.76 ± 0.28 W/kg. Near resonance, a cost for cyclical force that increased with both amplitude and frequency of force accounted for at least as much of the total energy expenditure as a cost for work. Series elasticity reduces the need for active work, but energy must still be expended for force production. PMID:21212245

Stigma-related barriers and facilitators to help seeking for mental health issues in the armed forces: a systematic review and thematic synthesis of qualitative literature.

PubMed

Coleman, S J; Stevelink, S A M; Hatch, S L; Denny, J A; Greenberg, N

2017-08-01

A recent quantitative review in the area of stigma and help seeking in the armed forces has questioned the association between these factors (Sharp et al. 2015). To date, the contribution of qualitative literature in this area has largely been ignored, despite the value this research brings to the understanding of complex social constructs such as stigma. The aim of the current systematic review of qualitative studies was to identify appropriate literature, assess the quality and synthesize findings across studies regarding evidence of stigma-related barriers and facilitators to help seeking for mental health issues within the armed forces. A multi-database text word search incorporating searches of PsycINFO, MEDLINE, Social Policy and Practice, Social Work Abstracts, EMBASE, ERIC and EBM Review databases between 1980 and April 2015 was conducted. Literature was quality assessed using the Critical Appraisal Skills Programme tool. Thematic synthesis was conducted across the literature. The review identified eight studies with 1012 participants meeting the inclusion criteria. Five overarching themes were identified across the literature: (1) non-disclosure; (2) individual beliefs about mental health; (3) anticipated and personal experience of stigma; (4) career concerns; and (5) factors influencing stigma. The findings from the current systematic review found that unlike inconsistent findings in the quantitative literature, there was substantial evidence of a negative relationship between stigma and help seeking for mental health difficulties within the armed forces. The study advocates for refinement of measures to accurately capture the complexity of stigma and help seeking in future quantitative studies.

Site-controlled quantum dots fabricated using an atomic-force microscope assisted technique

PubMed Central

Usuki, T; Ohshima, T; Sakuma, Y; Kawabe, M; Okada, Y; Takemoto, K; Miyazawa, T; Hirose, S; Nakata, Y; Takatsu, M; Yokoyama, N

2006-01-01

An atomic-force microscope assisted technique is developed to control the position and size of self-assembled semiconductor quantum dots (QDs). Presently, the site precision is as good as ± 1.5 nm and the size fluctuation is within ± 5% with the minimum controllable lateral diameter of 20 nm. With the ability of producing tightly packed and differently sized QDs, sophisticated QD arrays can be controllably fabricated for the application in quantum computing. The optical quality of such site-controlled QDs is found comparable to some conventionally self-assembled semiconductor QDs. The single dot photoluminescence of site-controlled InAs/InP QDs is studied in detail, presenting the prospect to utilize them in quantum communication as precisely controlled single photon emitters working at telecommunication bands.

Hexagonal boron nitride and water interaction parameters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, Yanbin; Aluru, Narayana R., E-mail: aluru@illinois.edu; Wagner, Lucas K.

2016-04-28

The study of hexagonal boron nitride (hBN) in microfluidic and nanofluidic applications at the atomic level requires accurate force field parameters to describe the water-hBN interaction. In this work, we begin with benchmark quality first principles quantum Monte Carlo calculations on the interaction energy between water and hBN, which are used to validate random phase approximation (RPA) calculations. We then proceed with RPA to derive force field parameters, which are used to simulate water contact angle on bulk hBN, attaining a value within the experimental uncertainties. This paper demonstrates that end-to-end multiscale modeling, starting at detailed many-body quantum mechanics andmore » ending with macroscopic properties, with the approximations controlled along the way, is feasible for these systems.« less

Improving Robotic Assembly of Planar High Energy Density Targets

NASA Astrophysics Data System (ADS)

Dudt, D.; Carlson, L.; Alexander, N.; Boehm, K.

2016-10-01

Increased quantities of planar assemblies for high energy density targets are needed with higher shot rates being implemented at facilities such as the National Ignition Facility and the Matter in Extreme Conditions station of the Linac Coherent Light Source. To meet this growing demand, robotics are used to reduce assembly time. This project studies how machine vision and force feedback systems can be used to improve the quantity and quality of planar target assemblies. Vision-guided robotics can identify and locate parts, reducing laborious manual loading of parts into precision pallets and associated teaching of locations. On-board automated inspection can measure part pickup offsets to correct part drop-off placement into target assemblies. Force feedback systems can detect pickup locations and apply consistent force to produce more uniform glue bond thickness, thus improving the performance of the targets. System designs and performance evaluations will be presented. Work supported in part by the US DOE under the Science Undergraduate Laboratory Internships Program (SULI) and ICF Target Fabrication DE-NA0001808.

Application of textured YBCO bulks with artificial holes for superconducting magnetic bearing

NASA Astrophysics Data System (ADS)

Dias, D. H. N.; Sotelo, G. G.; Moysés, L. A.; Telles, L. G. T.; Bernstein, P.; Kenfaui, D.; Aburas, M.; Chaud, X.; Noudem, J. G.

2015-07-01

The levitation force between a superconductor and a permanent magnet has been investigated for the development of superconducting magnetic bearings (SMBs). Depending on the proposed application, the SMBs can be arranged with two kinds of symmetries: rotational or linear. The SMBs present passive operation, low level of noise and no friction, but they need a cooling system for their operation. Nowadays the cooling problem may be easily solved by the use of a commercial cryocooler. The levitation force of SMBs is directly related to the quality of the superconductor material (which depends on its critical current density) and the permanent magnet arrangement. Also, research about the YBa2Cu3Ox (Y123) bulk materials has shown that artificial holes enhance the superconducting properties, in particular the magnetic trapped field. In this context, this work proposes the investigation of the levitation force of a bulk Y123 sample with multiple holes and the comparison of its performances with those of conventional plain Y123 superconductors.

Assessing differences in hours worked between male and female dentists: an analysis of cross-sectional national survey data from 1979 through 1999.

PubMed

Walton, Surrey M; Byck, Gayle R; Cooksey, Judith A; Kaste, Linda M

2004-05-01

Women are increasingly entering the dental work force. This study examines the impact of sex, age and other demographic characteristics on dentists' work force participation and on hours worked from 1979 through 1999. The study drew on cross-sectional data on dentists (4,209 men and 354 women) from national population surveys conducted by the U.S. Bureau of Labor Statistics from 1979 through 1999. The authors used descriptive statistics and regression analyses to examine sex differences in work force participation and in hours worked across age, as well as other factors. Work force participation was high for both men and women. Men worked more hours and worked part time less frequently; they worked more than 42 hours per week more frequently. Older dentists worked fewer hours, with a larger impact of age seen among men. Having children had a significantly greater effect on the number of hours worked per week among female dentists than among male dentists. There were significant differences in dentists' hours worked by sex and by age. The consistency of the results with past studies suggests these differences will hold in the near future. Women's entry into the dental work force has been significant and has helped maintain the supply of dentists. Sex differences in the work force should be considered in evaluating the supply of dentists and related work force policy.

Ground-water hydrology and water quality of the southern high plains aquifer, Melrose Air Force Range, Cannon Air Force Base, Curry and Roosevelt Counties, New Mexico, 2002-03

USGS Publications Warehouse

Langman, Jeff B.; Gebhardt, Fredrick E.; Falk, Sarah E.

2004-01-01

In cooperation with the U.S. Air Force, the U.S. Geological Survey characterized the ground-water hydrology and water quality at Melrose Air Force Range in east-central New Mexico. The purpose of the study was to provide baseline data to Cannon Air Force Base resource managers to make informed decisions concerning actions that may affect the ground-water system. Five periods of water-level measurements and four periods of water-quality sample collection were completed at Melrose Air Force Range during 2002 and 2003. The water-level measurements and water-quality samples were collected from a 29-well monitoring network that included wells in the Impact Area and leased lands of Melrose Air Force Range managed by Cannon Air Force Base personnel. The purpose of this report is to provide a broad overview of ground-water flow and ground-water quality in the Southern High Plains aquifer in the Ogallala Formation at Melrose Air Force Range. Results of the ground-water characterization of the Southern High Plains aquifer indicated a local flow system in the unconfined aquifer flowing northeastward from a topographic high, the Mesa (located in the southwestern part of the Range), toward a regional flow system in the unconfined aquifer that flows southeastward through the Portales Valley. Ground water was less than 55 years old across the Range; ground water was younger (less than 25 years) near the Mesa and ephemeral channels and older (25 years to 55 years) in the Portales Valley. Results of water-quality analysis indicated three areas of different water types: near the Mesa and ephemeral channels, in the Impact Area of the Range, and in the Portales Valley. Within the Southern High Plains aquifer, a sodium/chloride-dominated ground water was found in the center of the Impact Area of the Range with water-quality characteristics similar to ground water from the underlying Chinle Formation. This sodium/chloride-dominated ground water of the unconfined aquifer in the Impact Area indicates a likely connection with the deeper water-producing zone. No pesticides, explosives, volatile organic compounds, semivolatile organic compounds, organic halogens, or perchlorate were found in water samples from the Southern High Plains aquifer at the Range.

Cross influences of ozone and sulfate precursor emissions changes on air quality and climate

PubMed Central

Unger, Nadine; Shindell, Drew T.; Koch, Dorothy M.; Streets, David G.

2006-01-01

Tropospheric O3 and sulfate both contribute to air pollution and climate forcing. There is a growing realization that air quality and climate change issues are strongly connected. To date, the importance of the coupling between O3 and sulfate has not been fully appreciated, and thus regulations treat each pollutant separately. We show that emissions of O3 precursors can dramatically affect regional sulfate air quality and climate forcing. At 2030 in an A1B future, increased O3 precursor emissions enhance surface sulfate over India and China by up to 20% because of increased levels of OH and gas-phase SO2 oxidation rates and add up to 20% to the direct sulfate forcing for that region relative to the present day. Hence, O3 precursors impose an indirect forcing via sulfate, which is more than twice the direct O3 forcing itself (compare −0.61 vs. +0.35 W/m2). Regulatory policy should consider both air quality and climate and should address O3 and sulfate simultaneously because of the strong interaction between these species. PMID:16537360

Accuracy and precision of loadsol® insole force-sensors for the quantification of ground reaction force-based biomechanical running parameters.

PubMed

Seiberl, Wolfgang; Jensen, Elisabeth; Merker, Josephine; Leitel, Marco; Schwirtz, Ansgar

2018-05-29

Force plates represent the "gold standard" in measuring running kinetics to predict performance or to identify the sources of running-related injuries. As these measurements are generally limited to laboratory analyses, wireless high-quality sensors for measuring in the field are needed. This work analysed the accuracy and precision of a new wireless insole forcesensor for quantifying running-related kinetic parameters. Vertical ground reaction force (GRF) was simultaneously measured with pit-mounted force plates (1 kHz) and loadsol ® sensors (100 Hz) under unshod forefoot and rearfoot running-step conditions. GRF data collections were repeated four times, each separated by 30 min treadmill running, to test influence of extended use. A repeated-measures ANOVA was used to identify differences between measurement devices. Additionally, mean bias and Bland-Altman limits of agreement (LoA) were calculated. We found a significant difference (p < .05) in ground contact time, peak force, and force rate, while there was no difference in parameters impulse, time to peak, and negative force rate. There was no influence of time point of measurement. The mean bias of ground contact time, impulse, peak force, and time to peak ranged between 0.6% and 3.4%, demonstrating high accuracy of loadsol ® devices for these parameters. For these same parameters, the LoA analysis showed that 95% of all measurement differences between insole and force plate measurements were less than 12%, demonstrating high precision of the sensors. However, highly dynamic behaviour of GRF, such as force rate, is not yet sufficiently resolved by the insole devices, which is likely explained by the low sampling rate.

How electronic health records can unmask the hidden value of PAs.

PubMed

Ogunfiditimi, Folusho; Sherry, Scott P; Foote, Monica; Christie, Sarah L; Shock, Lisa P; Cawley, James; Browne, Aaron

2017-06-01

The Fee for Value (FFV) Task Force, a subgroup of the American Academy of PAs' Research and Strategic Initiatives Commission, has examined tools and mechanisms aimed at better clarifying the volume and value of PA work and how that work contributes to improving access to high-quality care. Establishing the value of PAs has been a challenging task for many healthcare providers. Often, PA value has been defined by their clinical productivity, without any clear direction as to what constitutes value versus productivity. The objective of this article is to unmask the value of PAs through the role of electronic health records and highlight PAs' ability to produce services that are value-oriented and quantifiably productive.

3 CFR - White House Task Force on Middle-Class Working Families

Code of Federal Regulations, 2010 CFR

2010-01-01

... 3 The President 1 2010-01-01 2010-01-01 false White House Task Force on Middle-Class Working... Task Force on Middle-Class Working Families Memorandum for the Heads of Executive Departments and... times. To these ends, I hereby direct the following: Section 1. White House Task Force on Middle-Class...

Dental work force strategies during a period of change and uncertainty.

PubMed

Brown, L J

2001-12-01

Both supply and demand influence the ability of the dental work force to adequately and efficiently provide dental care to a U.S. population growing in size and diversity. Major changes are occurring on both sides of the dental care market. Among factors shaping the demand for dental care are changing disease patterns, shifting population demographics, the extent and features of third-party payment, and growth of the economy and the population. The capacity of the dental work force to provide care is influenced by enhancements of productivity and numbers of dental health personnel, as well as their demographic and practice characteristics. The full impact of these changes is difficult to predict. The dentist-to-population ratio does not reflect all the factors that must be considered to develop an effective dental work force policy. Nationally, the dental work force is likely to be adequate for the next several years, but regional work force imbalances appear to exist and may get worse. Against this backdrop of change and uncertainty, future dental work force strategies should strive for short-term responsiveness while avoiding long-term inflexibility. Trends in the work force must be continually monitored. Thorough analysis is required, and action should be taken when necessary.

Employment Status, Quality of Matching, and Retirement in Korea: Evidence from Korean Longitudinal Study of Aging1

PubMed Central

Lee, Chulhee; Lee, Jinkook

2013-01-01

This paper explores the differing probabilities of retirement for self-employed and wage-and-salary workers. It finds self-employed workers are less likely to retire than wage-and-salary ones, and that differences in retirement incomes, health, productivity, job characteristics, and compulsory retirement practices do not explain the disparity. The difference between self-employed and wage-and-salary workers in the quality of matching between the job and the worker (i.e., between required and desired amount of work) explains the later retirement of the self-employed. We note the implications of these findings for labor-force participation at older ages and how policies might boost employment of the elderly. PMID:23935768

Roughness measurement and ion-beam polishing of super-smooth optical surfaces of fused quartz and optical ceramics.

PubMed

Chkhalo, N I; Churin, S A; Pestov, A E; Salashchenko, N N; Vainer, Yu A; Zorina, M V

2014-08-25

The main problems and the approach used by the authors for roughness metrology of super-smooth surfaces designed for diffraction-quality X-ray mirrors are discussed. The limitations of white light interferometry and the adequacy of the method of atomic force microscopy for surface roughness measurements in a wide range of spatial frequencies are shown and the results of the studies of the effect of etching by argon and xenon ions on the surface roughness of fused quartz and optical ceramics, Zerodur, ULE and Sitall, are given. Substrates of fused quartz and ULE with the roughness, satisfying the requirements of diffraction-quality optics intended for working in the spectral range below 10 nm, are made.

Radiation protection program for early detection of breast cancer in a mammography facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mariana, Villagomez Casimiro, E-mail: marjim10-66@ciencias.unam.mx, E-mail: cesar@fisica.unam.mx; Cesar, Ruiz Trejo, E-mail: marjim10-66@ciencias.unam.mx, E-mail: cesar@fisica.unam.mx; Ruby, Espejo Fonseca

Mammography is the best tool for early detection of Breast Cancer. In this diagnostic radiology modality it is necessary to establish the criteria to ensure the proper use and operation of the equipment used to obtain mammographic images in order to contribute to the safe use of ionizing radiation. The aim of the work was to implement at FUCAM-AC the radiation protection program which must be established for patients and radiation workers according to Mexican standards [1–4]. To achieve this goal, radiation protection and quality control manuals were elaborated [5]. Furthermore, a quality control program (QCP) in the mammography systemsmore » (analog/digital), darkroom included, has been implemented. Daily sensitometry, non-variability of the image quality, visualizing artifacts, revision of the equipment mechanical stability, compression force and analysis of repetition studies are some of the QCP routine tests that must be performed by radiological technicians of this institution as a set of actions to ensure the protection of patients. Image quality and patients dose assessment were performed on 4 analog equipment installed in 2 mobile units. In relation to dose assessment, all equipment passed the acceptance criteria (<3 mGy per projection). The image quality test showed that most images (70%)– presented artifacts. A brief summary of the results of quality control tests applied to the equipment and film processor are presented. To maintain an adequate level of quality and safety at FUCAM-AC is necessary that the proposed radiation protection program in this work is applied.« less

Modeling and Tool Wear in Routing of CFRP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Iliescu, D.; Fernandez, A.; Gutierrez-Orrantia, M. E.

2011-01-17

This paper presents the prediction and evaluation of feed force in routing of carbon composite material. In order to extend tool life and improve quality of the machined surface, a better understanding of uncoated and coated tool behaviors is required. This work describes (1) the optimization of the geometry of multiple teeth tools minimizing the tool wear and the feed force, (2) the optimization of tool coating and (3) the development of a phenomenological model between the feed force, the routing parameters and the tool wear. The experimental results indicate that the feed rate, the cutting speed and the toolmore » wear are the most significant factors affecting the feed force. In the case of multiple teeth tools, a particular geometry with 14 teeth right helix right cut and 11 teeth left helix right cut gives the best results. A thick AlTiN coating or a diamond coating can dramatically improve the tool life while minimizing the axial force, roughness and delamination. A wear model has then been developed based on an abrasive behavior of the tool. The model links the feed rate to the tool geometry parameters (tool diameter), to the process parameters (feed rate, cutting speed and depth of cut) and to the wear. The model presented has been verified by experimental tests.« less

Environmental Assessment for Construction of Small Arms Range at Tinker Air Force Base, Oklahoma

DTIC Science & Technology

2008-11-01

Air Force Material Command Tinker Air Force Base, Oklahoma Prepared by: CHEROKEE CRC, LLC 916 West 23rd Street Tulsa, OK 74107...activities to avoid potential for short-term soil erosion which could result in adverse effects to water quality. Hazardous Materials and Waste...erosion which could result in adverse effects to water quality. Hazardous Materials and Waste. Soil from the remediation activities could potentially

Grasp Assist Device with Automatic Mode Control Logic

NASA Technical Reports Server (NTRS)

Laske, Evan (Inventor); Davis, Donald R. (Inventor); Ihrke, Chris A. (Inventor)

2018-01-01

A system includes a glove, sensors, actuator assemblies, and controller. The sensors include load sensors which measure an actual grasping force and attitude sensors which determine a glove attitude. The actuator assembly provides a grasp assist force to the glove. Respective locations of work cells in the work environment and permitted work tasks for each work cell are programmed into the controller. The controller detects the glove location and attitude. A work task is selected by the controller for the location. The controller calculates a required grasp assist force using measured actual grasping forces from the load sensors. The required grasp assist force is applied via the glove using the actuator assembly to thereby assist the operator in performing the identified work task.

Comparing men's and women's experiences of work after cancer: a photovoice study.

PubMed

Morrison, T L; Thomas, R L

2015-10-01

Work is an important quality of life indicator for many cancer survivors. There is, however, a lack of appropriate support to help survivors with work integration. As a result, many survivors are forced to independently navigate their return to work, experiencing unnecessary pitfalls in the process. As a preliminary step toward addressing this current gap in survivorship support, we explored the work integration experiences of 20 cancer survivors, 10 women and 10 men. Photovoice methods were combined with two individual interviews per participant. Participant-produced photographs and interview transcripts were analyzed to identify key themes. Both commonalities and gender-differentiated motivations underlying work integration emerged. Female and male participants both demonstrated and discussed differentiated manners of coping. Men expressed a propensity for productivity and active engagements over talking used predominantly by women. Appreciation of men's proclivity for productivity and activity suggests that a gender-tailored approach to rehabilitation may enhance male survivors' participation and the utility of rehabilitation efforts.

State Workforce Policy Initiative.

ERIC Educational Resources Information Center

Public/Private Ventures, Philadelphia, PA.

Surging demand for workers, growing income inequality, and passage of welfare reforms have made work force development one of the United States' key national concerns. Public/Private Ventures has been working with various states to design work force development strategies that seek to address the concerns of many work force development specialists…

QUALITY MANAGEMENT DURING SELECTION OF TECHNOLOGIES EXAMPLE SITE MARCH AIR FORCE BASE, USA

EPA Science Inventory

This paper describes the remedial approach, organizational structure and key elements facilitating effective and efficient remediation of contaminated sites at March Air Force Base (AFB), California. The U.S. implementation and quality assurance approach to site remediation for ...

State of Technology for Renewal of Sewer Force Mains

EPA Science Inventory

This paper presents the results of a review of the state of technology for renewal of force mains (EPA, 2010). The review identified several needs, including the need for rational and common design approaches for rehabilitation systems, quality assurance/quality control procedur...

Ready, Set, Grow: Illinois Preschool. A Framework for Universal Access to Quality Preschool in Illinois.

ERIC Educational Resources Information Center

Wallen, Margie

The Illinois Governor's Task Force on Universal Access to Preschool is part of a broad-based effort to increase the quality of life for all children in Illinois. This report presents the action plan developed by this task force and calls for the creation of Illinois Preschool, a program giving all Illinois families quality preschool options for 3-…

Mammographic compression in Asian women.

PubMed

Lau, Susie; Abdul Aziz, Yang Faridah; Ng, Kwan Hoong

2017-01-01

To investigate: (1) the variability of mammographic compression parameters amongst Asian women; and (2) the effects of reducing compression force on image quality and mean glandular dose (MGD) in Asian women based on phantom study. We retrospectively collected 15818 raw digital mammograms from 3772 Asian women aged 35-80 years who underwent screening or diagnostic mammography between Jan 2012 and Dec 2014 at our center. The mammograms were processed using a volumetric breast density (VBD) measurement software (Volpara) to assess compression force, compression pressure, compressed breast thickness (CBT), breast volume, VBD and MGD against breast contact area. The effects of reducing compression force on image quality and MGD were also evaluated based on measurement obtained from 105 Asian women, as well as using the RMI156 Mammographic Accreditation Phantom and polymethyl methacrylate (PMMA) slabs. Compression force, compression pressure, CBT, breast volume, VBD and MGD correlated significantly with breast contact area (p<0.0001). Compression parameters including compression force, compression pressure, CBT and breast contact area were widely variable between [relative standard deviation (RSD)≥21.0%] and within (p<0.0001) Asian women. The median compression force should be about 8.1 daN compared to the current 12.0 daN. Decreasing compression force from 12.0 daN to 9.0 daN increased CBT by 3.3±1.4 mm, MGD by 6.2-11.0%, and caused no significant effects on image quality (p>0.05). Force-standardized protocol led to widely variable compression parameters in Asian women. Based on phantom study, it is feasible to reduce compression force up to 32.5% with minimal effects on image quality and MGD.

The Pharmaceutical Capping Process-Correlation between Residual Seal Force, Torque Moment, and Flip-off Removal Force.

PubMed

Mathaes, Roman; Mahler, Hanns-Christian; Vorgrimler, Lothar; Steinberg, Henrik; Dreher, Sascha; Roggo, Yves; Nieto, Alejandra; Brown, Helen; Roehl, Holger; Adler, Michael; Luemkemann, Joerg; Huwyler, Joerg; Lam, Philippe; Stauch, Oliver; Mohl, Silke; Streubel, Alexander

2016-01-01

The majority of parenteral drug products are manufactured in glass vials with an elastomeric rubber stopper and a crimp cap. The vial sealing process is a critical process step during fill-and-finish operations, as it defines the seal quality of the final product. Different critical capping process parameters can affect rubber stopper defects, rubber stopper compression, container closure integrity, and also crimp cap quality. A sufficiently high force to remove the flip-off button prior to usage is required to ensure quality of the drug product unit by the flip-off button during storage, transportation, and until opening and use. Therefore, the final product is 100% visually inspected for lose or defective crimp caps, which is subjective as well as time- and labor-intensive. In this study, we sealed several container closure system configurations with different capping equipment settings (with corresponding residual seal force values) to investigate the torque moment required to turn the crimp cap. A correlation between torque moment and residual seal force has been established. The torque moment was found to be influenced by several parameters, including diameter of the vial head, type of rubber stopper (serum or lyophilized) and type of crimp cap (West(®) or Datwyler(®)). In addition, we measured the force required to remove the flip-off button of a sealed container closure system. The capping process had no influence on measured forces; however, it was possible to detect partially crimped vials. In conclusion, a controlled capping process with a defined target residual seal force range leads to a tight crimp cap on a sealed container closure system and can ensure product quality. The majority of parenteral drug products are manufactured in a glass vials with an elastomeric rubber stopper and a crimp cap. The vial sealing process is a critical process step during fill-and-finish operations, as it defines the seal quality of the final product. An adequate force to remove the flip-off button prior to usage is required to ensure product quality during storage and transportation until use. In addition, the complete crimp cap needs to be fixed in a tight position on the vial. In this study, we investigated the torque moment required to turn the crimp cap and the force required to remove the flip-off button of container closure system sealed with different capping equipment process parameters (having different residual seal force values). © PDA, Inc. 2016.

Geodatabase of environmental information for Air Force Plant 4 and Naval Air Station-Joint Reserve Base Carswell Field, Fort Worth, Texas, 1990-2004

USGS Publications Warehouse

Shah, Sachin D.; Quigley, Sean M.

2005-01-01

Air Force Plant 4 (AFP4) and adjacent Naval Air Station-Joint Reserve Base (NAS-JRB) at Fort Worth, Tex., constitute a government-owned, contractor-operated (GOCO) facility that has been in operation since 1942. Contaminants from the facility, primarily volatile organic compounds (VOCs) and metals, have entered the groundwater-flow system through leakage from waste-disposal sites (landfills and pits) and from manufacturing processes (U.S. Air Force, Aeronautical Systems Center, 1995). The U.S. Geological Survey (USGS), in cooperation with the U.S. Air Force (USAF), Aeronautical Systems Center, Environmental Management Directorate (ASC/ENVR), developed a comprehensive database (or geodatabase) of temporal and spatial environmental information associated with the geology, hydrology, and water quality at AFP4 and NAS-JRB. The database of this report provides information about the AFP4 and NAS-JRB study area including sample location names, identification numbers, locations, historical dates, and various measured hydrologic data. This database does not include every sample location at the site, but is limited to an aggregation of selected digital and hardcopy data of the USAF, USGS, and various consultants who have previously or are currently working at the site.

Forces acting between polishing tool and workpiece surface in magnetorheological finishing

NASA Astrophysics Data System (ADS)

Schinhaerl, Markus; Vogt, Christian; Geiss, Andreas; Stamp, Richard; Sperber, Peter; Smith, Lyndon; Smith, Gordon; Rascher, Rolf

2008-08-01

Magnetorheological finishing is a computer-controlled polishing technique that is used mainly in the field of high-quality optical lens production. The process is based on the use of a magnetorheological polishing fluid that is able, in a reversible manner, to change its viscosity from a liquid state to a solid state under the control of a magnetic field. This outstanding characteristic facilitates rapid control (in milliseconds) of the yield stress, and thus the pressure applied to the workpiece surface to be polished. A three-axis dynamometer was used to measure the forces acting between the magnetorheological fluid and the workpiece surface during determination of the material removal characteristic of the polishing tool (influence function). The results of a testing series using a QED Q22-X MRF polishing machine with a 50 mm wheel assembly show that the normal forces range from about 2 to 20 N. Knowledge of the forces is essential, especially when thin workpieces are to be polished and distortion becomes significant. This paper discusses, and gives examples of, the variation in the parameters experienced during a programme of experiments, and provides examples of the value of this work.

Agricultural Work Force Households: How Much Do They Depend on Farming? Background for Agricultural Policy. Agriculture Information Bulletin Number 547.

ERIC Educational Resources Information Center

Cox, E. Jane; Oliveira, Victor J.

According to data from the 1985 Agricultural Work Force Survey, over 13.5 million of the 17.6 million agricultural work force household members (77 percent) lived in households headed by a farm worker. Some farm workers worked on the farm as their primary job, whereas others primarily worked off the farm. Farm work was an occasional form of…

Comparing two methods to record maximal voluntary contractions and different electrode positions in recordings of forearm extensor muscle activity: Refining risk assessments for work-related wrist disorders.

PubMed

Dahlqvist, Camilla; Nordander, Catarina; Granqvist, Lothy; Forsman, Mikael; Hansson, Gert-Åke

2018-01-01

Wrist disorders are common in force demanding industrial repetitive work. Visual assessment of force demands have a low reliability, instead surface electromyography (EMG) may be used as part of a risk assessment for work-related wrist disorders. For normalization of EMG recordings, a power grip (hand grip) is often used as maximal voluntary contraction (MVC) of the forearm extensor muscles. However, the test-retest reproducibility is poor and EMG amplitudes exceeding 100% have occasionally been recorded during work. An alternative MVC is resisted wrist extension, which may be more reliable. To compare hand grip and resisted wrist extension MVCs, in terms of amplitude and reproducibility, and to examine the effect of electrode positioning. Twelve subjects participated. EMG from right forearm extensors, from four electrode pairs, was recorded during MVCs, on three separate occasions. The group mean EMG amplitudes for resisted wrist extension were 1.2-1.7 times greater than those for hand grip. Resisted wrist extension showed better reproducibility than hand grip. The results indicate that the use of resisted wrist extension is a more accurate measurement of maximal effort of wrist extensor contractions than using hand grip and should increase the precision in EMG recordings from forearm extensor muscles, which in turn will increase the quality of risk assessments that are based on these.

QUALITY MANAGEMENT DURING SELECTION OF TECHNOLOGIES; EXAMPLE SITE MARCH AIR FORCE BASE, USA

EPA Science Inventory

This paper describes the remedial approach, organizational structure and key elements facilitating effective and efficient remediation of contaminated sites at March Air Force Base (AFB), California. The U.S. implementation and quality assurance approach to site remediation for a...

40 CFR 35.936-14 - Force account work.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Force account work. 35.936-14 Section... ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works-Clean Water Act § 35.936-14 Force account work. (a) A grantee must secure the project officer's prior written approval for use of...

Diversity in the Work Force. The Highlight Zone: Research @ Work No. 4.

ERIC Educational Resources Information Center

Wentling, Rose Mary

A literature review was conducted to identify critical work force diversity issues in today's changing workplace and identify ways organizations and career and technical education (CTE) practitioners can increase work force diversity. A broad, all-inclusive definition of diversity was developed that focuses on how diversity affects individuals and…

Dutch Musculoskeletal Questionnaire: description and basic qualities.

PubMed

Hildebrandt, V H; Bongers, P M; van Dijk, F J; Kemper, H C; Dul, J

2001-10-10

A questionnaire ('Dutch Musculoskeletal Questionnaire', DMQ) for the analysis of musculoskeletal workload and associated potential hazardous working conditions as well as musculoskeletal symptoms in worker populations is described and its qualities are explored using a database of 1575 workers in various occupations who completed the questionnaire. The 63 questions on musculoskeletal workload and associated potentially hazardous working conditions can be categorized into seven indices (force, dynamic and static load, repetitive load, climatic factors, vibration and ergonomic environmental factors). Together with four separate questions on standing, sitting, walking and uncomfortable postures, the indices constitute a brief overview of the main findings on musculoskeletal workload and associated potentially hazardous working conditions. Homogeneity of the indices is satisfactory. The divergent validity of the indices is fair when compared with an index of psychosocial working conditions and discomfort during exposure to physical loads. Worker groups with contrasting musculoskeletal loads can be differentiated on the basis of the indices and other factors. With respect to the concurrent validity, it appears that most indices and factors show significant associations with low back and/or neck-shoulder symptoms. This questionnaire can be used as a simple and quick inventory for occupational health services to identify worker groups in which a more thorough ergonomic analysis is indicated.

Impacts of the Convention on Long-range Transboundary Air Pollution on air quality in Europe.

PubMed

Bull, Keith; Johansson, Matti; Krzyzanowski, Michal

2008-01-01

The Convention on Long-range Transboundary Air Pollution has been one of the main ways of protecting the environment in Europe from air pollution. This convention has successfully bridged different political systems even through times of political change, and is a prime example of what can be achieved through intergovernmental cooperation. Through creating an effective framework for controlling and reducing the damage to human health and the environment from transboundary air pollution, this convention has proved successful. This article considers the development of the convention and its work on adverse air pollution effects, in particular on activities related to quantifying effects on human health as carried out by the convention's joint (with WHO) Task Force on the Health Effects of Air Pollution (Task Force on Health), and concludes with some indications of the convention's future priorities.

Development of a shape memory alloy actuator for a robotic eye prosthesis

NASA Astrophysics Data System (ADS)

Bunton, T. B. Wolfe; Faulkner, M. G.; Wolfaardt, J.

2005-08-01

The quality of life of patients who wear an orbital prosthesis would be vastly improved if their prostheses were also able to execute vertical and horizontal motion. This requires appropriate actuation and control systems to create an intelligent prosthesis. A method of actuation that meets the demanding design criteria is currently not available. The present work considers an activation system that follows a design philosophy of biomimicry, simplicity and space optimization. While several methods of actuation were considered, shape memory alloys were chosen for their high power density, high actuation forces and high displacements. The behaviour of specific shape memory alloys as an actuator was investigated to determine the force obtained, the transformation temperatures and details of the material processing. In addition, a large-scale prototype was constructed to validate the response of the proposed system.

Evaluation of knee joint forces during kneeling work with different kneepads.

PubMed

Xu, Hang; Jampala, Sree; Bloswick, Donald; Zhao, Jie; Merryweather, Andrew

2017-01-01

The main purpose of this study is to determine knee joint forces resulting from kneeling work with and without kneepads to quantify how different kneepads redistribute force. Eleven healthy males simulated a tile setting task to different locations during six kneepad states (five different kneepad types and without kneepad). Peak and average forces on the anatomical landmarks of both knees were obtained by custom force sensors. The results revealed that kneepad design can significantly modify the forces on the knee joint through redistribution. The Professional Gel design was preferred among the five tested kneepads which was confirmed with both force measurements and participants' responses. The extreme reaching locations induced significantly higher joint forces on left knee or right knee depending on task. The conclusion of this study is that a properly selected kneepad for specific tasks and a more neutral working posture can modify the force distribution on the knees and likely decrease the risk of knee disorders from kneeling work. Copyright © 2016 Elsevier Ltd. All rights reserved.

Sci—Fri PM: Topics — 03: The Global Task Force on Radiotherapy for Cancer Control: Core Investments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Dyk, J.; Jaffray, D. A.; MacPherson, M. S.

The Union for International Cancer Control (UICC) is a membership-based, non-governmental organization with a mandate to “…to unite the cancer community to reduce the global cancer burden, to promote greater equity, and to integrate cancer control into the world health and development agenda.” COMP is an associate member of the UICC. It is well recognized by the UICC that there are major gaps between high, and low and middle income countries, in terms of access to cancer services including access to radiation therapy. In this context, the UICC has developed a Global Task Force on Radiotherapy for Cancer Control withmore » a charge to answer a single question: “What does it cost to close the gap between what exists today and reasonable access to radiotherapy globally?” The Task Force consists of leaders internationally recognized for their radiation treatment related expertise (radiation oncologists, medical physicists, radiation therapists) as well as those with global health and economics specialization. The Task Force has developed three working groups: (1) to look at the global burden of cancer; (2) to look at the infrastructure requirements (facilities, equipment, personnel); and (3) to consider outcomes in terms of numbers of lives saved and palliated patients. A report is due at the World Cancer Congress in December 2014. This presentation reviews the infrastructure considerations under analysis by the second work group. The infrastructure parameters being addressed include capital costs of buildings and equipment and operating costs, which include human resources, equipment servicing and quality control, and general overhead.« less

Satellite Communications Using Commercial Protocols

NASA Technical Reports Server (NTRS)

Ivancic, William D.; Griner, James H.; Dimond, Robert; Frantz, Brian D.; Kachmar, Brian; Shell, Dan

2000-01-01

NASA Glenn Research Center has been working with industry, academia, and other government agencies in assessing commercial communications protocols for satellite and space-based applications. In addition, NASA Glenn has been developing and advocating new satellite-friendly modifications to existing communications protocol standards. This paper summarizes recent research into the applicability of various commercial standard protocols for use over satellite and space- based communications networks as well as expectations for future protocol development. It serves as a reference point from which the detailed work can be readily accessed. Areas that will be addressed include asynchronous-transfer-mode quality of service; completed and ongoing work of the Internet Engineering Task Force; data-link-layer protocol development for unidirectional link routing; and protocols for aeronautical applications, including mobile Internet protocol routing for wireless/mobile hosts and the aeronautical telecommunications network protocol.

Influence of forces acting on side of machine on precision machining of large diameter holes

NASA Astrophysics Data System (ADS)

Fedorenko, M. A.; Bondarenko, J. A.; Sanina, T. M.

2018-03-01

One of the most important factors that increase efficiency, durability and reliability of rotating units is precision installation, preventive maintenance work, timely replacing of a failed or worn components and assemblies. These works should be carried out in the operation of the equipment, as the downtime in many cases leads to large financial losses. Stop of one unit of an industrial enterprise can interrupt the technological chain of production, resulting in a possible stop of the entire equipment. Improving the efficiency and optimization of the repair process increases accuracy of installation work when installing equipment, conducting restoration under operating conditions relevant for enterprises of different industries because it eliminates dismantling the equipment, sending it to maintenance, the expectation of equipment return, the new installation with the required quality and accuracy of repair.

The application of remote sensing to resource management and environmental quality programs in Kansas

NASA Technical Reports Server (NTRS)

Barr, B. G.; Martinko, E. A. (Principal Investigator)

1983-01-01

The activities of the Kansas Applied Remote Sensing (KARS) Program during the period April 1, 1982 through Marsh 31, 1983 are described. The most important work revolved around the Kansas Interagency Task Force on Applied Remote Sensing and its efforts to establish an operational service oriented remote sensing program in Kansas state government. Concomitant with this work was the upgrading of KARS capabilities to process data for state agencies through the vehicle of a low cost digital data processing system. The KARS Program continued to take an active role in irrigation mapping. KARS is now integrating data acquired through analysis of LANDSAT into geographic information systems designed for evaluating groundwater resources. KARS also continues to work at the national level on the national inventory of state natural resources information systems.

Indoor Air Quality In Maine Schools: Report of the Task Force To Examine the Establishment and Implementation of State Standards for Indoor Air Quality in Maine Schools.

ERIC Educational Resources Information Center

Malcolm, Judith

Asserting that in Maine and across the nation, school buildings are becoming increasingly plagued with indoor air quality (IAQ) problems which contribute to a variety of illnesses in children and adults, this report from a Maine state legislative task force identifies appropriate policies and identifies actions necessary for the prevention and…

Evaluating signal and noise spectral density of a qPlus sensor with an active feedback control

NASA Astrophysics Data System (ADS)

Lee, Manhee; An, Sangmin; Jhe, Wonho

2018-05-01

Q-control technique enables to actively change the quality factor of the probe oscillation in dynamic atomic force microscopy. The Q-control is realized by adding a self-feedback loop into the original actuation-detection system, in which a damping force with controllable damping coefficient in magnitude and sign is applied to the oscillating probe. While the applied force alters the total damping interaction and thus the overall `signal' of the probe motion, the added feedback system changes the `noise' of the motion as well. Here, we systematically investigate the signal, the noise, and the signal-to-noise ratio of the qPlus sensor under the active Q-control. We quantify the noise of the qPlus motion by measuring the noise spectral density, which is reproduced by a harmonic oscillator model including the thermal and the measurement noises. We show that the noise signal increases with the quality factor controlled, scaling as the square root of the quality factor. Because the overall signal is linearly proportional to the quality factor, the signal-to-noise ratio scales as the square root of the quality factor. The Q-controlled qPlus with a highly enhanced Q, up to 10,000 in air, leads to the minimum detectable force gradient of 0.001 N/m, which would enhance the capability of the qPlus sensor for atomic force microscopy and spectroscopy.

The Work, the Workplace, and the Work Force of Tomorrow.

ERIC Educational Resources Information Center

Allen, Claudia

1995-01-01

Ann McLaughlin, a former secretary of labor, discusses her views on the future of the workplace. She feels that to solve the impending problem of educational deficits among the work force, employers will begin their own educational programs, improving both employee loyalty and work force mobility. Includes predictions for future growth fields.…

Public-Private Partnerships Working Beyond Scale Challenges toward Water Quality Improvements from Private Lands

NASA Astrophysics Data System (ADS)

Enloe, Stephanie K.; Schulte, Lisa A.; Tyndall, John C.

2017-10-01

In recognition that Iowa agriculture must maintain long-term production of food, fiber, clean water, healthy soil, and robust rural economies, Iowa recently devised a nutrient reduction strategy to set objectives for water quality improvements. To demonstrate how watershed programs and farmers can reduce nutrient and sediment pollution in Iowa waters, the Iowa Water Quality Initiative selected the Boone River Watershed Nutrient Management Initiative as one of eight demonstration projects. For over a decade, diverse public, private, and non-profit partner organizations have worked in the Boone River Watershed to engage farmers in water quality management efforts. To evaluate social dynamics in the Boone River Watershed and provide partners with actionable recommendations, we conducted and analyzed semi-structured interviews with 33 program leaders, farmers, and local agronomists. We triangulated primary interview data with formal analysis of Boone River Watershed documents such as grant applications, progress reports, and outreach materials. Our evaluation suggests that while multi-stakeholder collaboration has enabled partners to overcome many of the traditional barriers to watershed programming, scale mismatches caused by external socio-economic and ecological forces still present substantial obstacles to programmatic resilience. Public funding restrictions and timeframes, for example, often cause interruptions to adaptive management of water quality monitoring and farmer engagement. We present our findings within a resilience framework to demonstrate how multi-stakeholder collaboration can help sustain adaptive watershed programs to improve socio-ecological function in agricultural watersheds such as the Boone River Watershed.

Installation Restoration Program Phase 1: Records Search of Hanscom Air Force Base, Massachusetts

DTIC Science & Technology

1984-08-01

Engineer o Kevin R. Boyer, P.E., Project Manager and Civil Engineer o Alfred N. Wickline, Records Search Team Leader and Soil Scientist o Claudia A...INVESTIGATION TEAM :I.., 𔃾 44. ’m4, Use or disclosure of proposal data is subject to the restriction on the Title page of this Proposal. KEVIN R... KEVIN R. BOYER, P.E. Page 2 of 3 While working under the USEPA’s Field Investigation Team (FIT) program, Mr. Boyer was part of a quality assurance (QA

1995 Annual epidemiologic surveillance report for Pantex Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This report provides a summary of epidemiologic surveillance data collected from the Pantex Plant from January 1, 1995 through December 31,1995. The data were collected by a coordinator at Pantex and submitted to the Epidemiologic Surveillance Data Center,located at Oak Ridge Institute for Science and Education, where quality control procedures and data analyses were carried out. The data presented apply only to Pantex. The main sections of the report are the same as in previous years; the 1995 report provides additional information describing the work force by age and occupational groups.

NDT standards from the perspective of the Department of Defense

NASA Astrophysics Data System (ADS)

Strauss, Bernard

1992-09-01

The interaction of the DoD non-Government Society (NGS) bodies in the area of nondestructive testing (NDT) are illustrated. The adoption process for NGS is outlined including the criteria for adoption, what adoption means, and the advantages of DoD/NGS interaction. The tasks of the DoD's Standardization Program Plan for NDT are described along with DoD's efforts on a Joint Army, Navy, Air Force (JANNAF) NDE Subcommittee and on an international standardization group (America, Britain, Canada, and Australia) called the Quadripartite Working Group on Proofing, Inspection, and Quality Assurance.

Competitiveness and the Quality of the American Work Force. Hearings before the Subcommittee on Education and Health of the Joint Economic Committee. Congress of the United States, One Hundredth Congress, First Session (October 29, November 10, 19, and December 3, 1987). Part 2.

ERIC Educational Resources Information Center

Joint Economic Committee, Washington, DC.

These four hearings examine the United States educational system and consider its redesign with an eye toward the skill needs of the future. The goal of the hearings is to develop a comprehensive legislative agenda to enable the next Congress and the next administration to take the necessary steps to provide U.S. industries with adequately trained…

Task Force on Workplace Violence: Part I. The assessment.

PubMed

Carroll, V

1997-06-01

Prevention is key in dealing with workplace violence. Assessment, open communication within the workplace, well-designed policies, and adequate staff training form the framework for an effective violence reduction plan. Nurses offer invaluable resources to each other, their patients. and their workplace. Through effective planning and problem-solving, we can collaborate with other disciplines to enhance the future of health care and provide for a safer workplace. Just as we are advocates for safe and quality health care for our patients, we must also be champions for creating a safe work environment for ourselves.

Surface roughness model based on force sensors for the prediction of the tool wear.

PubMed

de Agustina, Beatriz; Rubio, Eva María; Sebastián, Miguel Ángel

2014-04-04

In this study, a methodology has been developed with the objective of evaluating the surface roughness obtained during turning processes by measuring the signals detected by a force sensor under the same cutting conditions. In this way, the surface quality achieved along the process is correlated to several parameters of the cutting forces (thrust forces, feed forces and cutting forces), so the effect that the tool wear causes on the surface roughness is evaluated. In a first step, the best cutting conditions (cutting parameters and radius of tool) for a certain quality surface requirement were found for pieces of UNS A97075. Next, with this selection a model of surface roughness based on the cutting forces was developed for different states of wear that simulate the behaviour of the tool throughout its life. The validation of this model reveals that it was effective for approximately 70% of the surface roughness values obtained.

Plantar pressure measurements and running-related injury: A systematic review of methods and possible associations.

PubMed

Mann, Robert; Malisoux, Laurent; Urhausen, Axel; Meijer, Kenneth; Theisen, Daniel

2016-06-01

Pressure-sensitive measuring devices have been identified as appropriate tools for measuring an array of parameters during running. It is unclear which biomechanical characteristics relate to running-related injury (RRI) and which data-processing techniques are most promising to detect this relationship. This systematic review aims to identify pertinent methodologies and characteristics measured using plantar pressure devices, and to summarise their associations with RRI. PubMed, Embase, CINAHL, ScienceDirect and Scopus were searched up until March 2015. Retrospective and prospective, biomechanical studies on running using any kind of pressure-sensitive device with RRI as an outcome were included. All studies involving regular or recreational runners were considered. The study quality was assessed and the measured parameters were summarised. One low quality, two moderate quality and five high quality studies were included. Five different subdivisions of plantar area were identified, as well as five instants and four phases of measurement during foot-ground contact. Overall many parameters were collated and subdivided as plantar pressure and force, plantar pressure and force location, contact area, timing and stride parameters. Differences between the injured and control group were found for mediolateral and anteroposterior displacement of force, contact area, velocity of force displacement, relative force-time integral, mediolateral force ratio, time to peak force and inter-stride correlative patterns. However, no consistent results were found between studies and no biomechanical risk patterns were apparent. Additionally, conflicting findings were reported for peak force in three studies. Based on these observations, we provide suggestions for improved methodology measurement of pertinent parameters for future studies. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

48 CFR 223.570 - Drug-free work force.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Drug-free work force. 223.570 Section 223.570 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... TECHNOLOGIES, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Drug-Free Workplace 223.570 Drug-free work force. ...

48 CFR 223.570 - Drug-free work force.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Drug-free work force. 223.570 Section 223.570 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... TECHNOLOGIES, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Drug-Free Workplace 223.570 Drug-free work force. ...

48 CFR 223.570 - Drug-free work force.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Drug-free work force. 223.570 Section 223.570 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... TECHNOLOGIES, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Drug-Free Workplace 223.570 Drug-free work force. ...

48 CFR 223.570 - Drug-free work force.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Drug-free work force. 223.570 Section 223.570 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... TECHNOLOGIES, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Drug-Free Workplace 223.570 Drug-free work force. ...

48 CFR 223.570 - Drug-free work force.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Drug-free work force. 223.570 Section 223.570 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... TECHNOLOGIES, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Drug-Free Workplace 223.570 Drug-free work force. ...

Needs assessment and implementation of an employee assistance program: promoting a healthier work force.

PubMed

Monfils, M K

1995-05-01

1. The functions of a continuous quality improvement tool used by Deming--the Plan, Do, Check, Act Cycle--can be applied to the assessment, implementation, and ongoing evaluation of an Employee Assistance Program (EAP). 2. Various methods are available to assess the need for an EAP. As much data as possible should be collected to qualify and quantify the need so that management can make an informed decision and develop measures to determine program effectiveness. 3. Once an EAP is implemented, it should be monitored continually against the effectiveness measures initially developed. Using a continuous quality improvement process, the occupational health nurse and the EAP provider can establish a dynamic relationship that allows for growth beyond the original design and increased effectiveness of service to employees.

Research to Assembly Scheme for Satellite Deck Based on Robot Flexibility Control Principle

NASA Astrophysics Data System (ADS)

Guo, Tao; Hu, Ruiqin; Xiao, Zhengyi; Zhao, Jingjing; Fang, Zhikai

2018-03-01

Deck assembly is critical quality control point in final satellite assembly process, and cable extrusion and structure collision problems in assembly process will affect development quality and progress of satellite directly. Aimed at problems existing in deck assembly process, assembly project scheme for satellite deck based on robot flexibility control principle is proposed in this paper. Scheme is introduced firstly; secondly, key technologies on end force perception and flexible docking control in the scheme are studied; then, implementation process of assembly scheme for satellite deck is described in detail; finally, actual application case of assembly scheme is given. Result shows that compared with traditional assembly scheme, assembly scheme for satellite deck based on robot flexibility control principle has obvious advantages in work efficiency, reliability and universality aspects etc.

Internal Aspects of the Skill Transfer of Manual Assembly Work

ERIC Educational Resources Information Center

Doyo, Daisuke

2009-01-01

In manual assembly work, parts are often assembled by applying force with a simple tool or by hand. A worker thus needs control the force he or she applies in working, as an appropriate level of force is requisite for minimizing work failures and improving efficiency. The object of this study is to clarify the relationship between the level of…

Employment in Perspective: Women in the Labor Force. Third Quarter 1988. Report 758.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

The female share of the older work force has nearly doubled since 1950. In 1987, the 6.2 million women aged 55 and over in the labor force constituted 4 of every 10 older workers. Because young women today have a stronger work attachment than did their mothers and grandmothers, the female share of the older work force is likely to continue to…

FM 100-11 Force Integration

DTIC Science & Technology

1998-01-01

formed or available at an Army installation. It as- sesses both the quantity and quality of service deliv- ery, such as how much service is provided...34 That is, determining how much should it cost to provide services to cus- tomers to maintain a given level of quality and still satisfy their needs. d...ence, and ability to sustain the force (judgmental). (9) Quality of soldier and family support services (judgmental). (10) Civilian and military

Blood Pressure, Sleep Quality and Fatigue in Shift Working Police Officers: Effects of a Twelve Hour Roster System on Cardiovascular and Sleep Health.

PubMed

Elliott, Jaymen L; Lal, Sara

2016-01-29

Police officers have been reported to exhibit a high incidence of pathologies, which present prematurely in an otherwise healthy population. Shift work has also been associated with an increased risk of cardiovascular and sleep disorders, attributable to its propensity for circadian rhythm dysfunction. However, contention exists as to whether shift work has a direct effect upon blood pressure (BP) regulation. This cross-sectional study sought to determine changes in BP and associations with the overall sleep quality and fatigue in 206 general duties police officers (n = 140 males) of the New South Wales Police Force in Australia. The subjects' BP was assessed before and after their twelve hour shift, during which time they also completed the Lifestyle Appraisal Questionnaire, Pittsburgh Sleep Quality Index (PSQI), Epworth Sleepiness Scale and Fatigue Severity Scale (FSS). Poor sleep quality (PSQI) and fatigue severity (FSS) were found to predominate in the sample (69% and 51% respectively). Although there was no change in BP for male participants, female officers' systolic blood pressure (SBP) was found to increase significantly across the shift (p < 0.001), but with no change found in females' diastolic blood pressure (DBP). Finally, higher pre and post-shift SBP (r = -0.26, p = 0.001; r = -0.25, p = 0.001, respectively) and DBP (r = -0.26, p = 0.001; r = -0.26, p = 0.001, respectively) were significantly correlated with lower FSS scores after accounting for age, waist-hip ratio and lifestyle risk factors. Based on these preliminary findings, there was a significant increase in SBP of female police officers after shift work, while BP and fatigue levels in all police officers were strongly related. Moreover, the predominating poor sleep quality and impact of fatigue in this sample remain a concern. Further research is required to ensure the physiological welfare of police officers, while strategies must be implemented to manage the detrimental effects shift work may be having upon their cardiovascular and sleep health.

14 CFR 151.51 - Performance of construction work: Sponsor force account.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Performance of construction work: Sponsor force account. 151.51 Section 151.51 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Development Projects § 151.51 Performance of construction work: Sponsor force account. (a) Before undertaking...

14 CFR 151.51 - Performance of construction work: Sponsor force account.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Performance of construction work: Sponsor force account. 151.51 Section 151.51 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Development Projects § 151.51 Performance of construction work: Sponsor force account. (a) Before undertaking...

14 CFR 151.51 - Performance of construction work: Sponsor force account.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Performance of construction work: Sponsor force account. 151.51 Section 151.51 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Development Projects § 151.51 Performance of construction work: Sponsor force account. (a) Before undertaking...

14 CFR 151.51 - Performance of construction work: Sponsor force account.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Performance of construction work: Sponsor force account. 151.51 Section 151.51 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Development Projects § 151.51 Performance of construction work: Sponsor force account. (a) Before undertaking...

14 CFR 151.51 - Performance of construction work: Sponsor force account.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Performance of construction work: Sponsor force account. 151.51 Section 151.51 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Development Projects § 151.51 Performance of construction work: Sponsor force account. (a) Before undertaking...

Honeywell's Working Parents Task Force. Final Report and Recommendations.

ERIC Educational Resources Information Center

Honeywell, Inc., Minneapolis, Minn.

This publication provides a summary of the Honeywell Working Parent Task Force's recommendations on how to solve problems experienced by working parents. The Task Force consisted of three committees: the Employment Practices Committee (EPC); the Parent Education Committee (PEC); and the Child Care Facilities Committee (CCFC). After examining a…

Workforce Education: Issues for the New Century.

ERIC Educational Resources Information Center

Pautler, Albert J., Jr.

This paper is intended to guide small groups of vocational educators in discussions regarding work force education issues for the next century. The following work force issues are suggested: the aging work force; vocational education's role in reforming K-12 education; distance education for technical education programs; the labor shortages…

78 FR 67132 - GPS Satellite Simulator Control Working Group Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-08

... DEPARTMENT OF DEFENSE Department of the Air Force GPS Satellite Simulator Control Working Group Meeting AGENCY: Space and Missile Systems Center, Global Positioning Systems (GPS) Directorate, Air Force... Control Working Group (SSCWG) meeting on 6 December 2013 from 0900-1300 PST at Los Angeles Air Force Base...

Military Personnel: Army Needs to Focus on Cost-Effective Use of Financial Incentives and Quality Standards in Managing Force Growth

DTIC Science & Technology

2009-05-01

diplomas and who score in the upper half on the Armed Forces Qualification Test. The Army implemented some new programs to increase the market of...quality of its enlisted personnel, we analyzed data from OSD on educational credentials and aptitude test scores for these personnel, and we collected...recruits to have high-school diplomas and at least 60 percent to have scores in the upper half on the Armed Forces Qualification Test (AFQT). In fiscal

Reduction of centrifugation force in discontinuous percoll gradients increases in vitro fertilization rates without reducing bovine sperm recovery.

PubMed

Guimarães, A C G; Leivas, F G; Santos, F W; Schwengber, E B; Giotto, A B; Machado, C I U; Gonçalves, C G M; Folchini, N P; Brum, D S

2014-05-01

The objective of this study was to determine the effect of different centrifugation forces in bovine sperm separation by discontinuous Percoll gradients for in vitro fertilization IVF. The semen samples from each bull were pooled or each bull were centrifuged separately and centrifuged in discontinuous Percoll gradients (30, 60 and 90%) at different forces: F1 (9000×g), F2 (6500×g), F3 (4500×g) and F4 (2200×g), according experiment. The sperm samples were evaluated to determine the concentration, motility, vigor, morphology, reactive oxygen species (ROS), integrity of the plasma membrane, lipid peroxidation, antioxidants and embryo development were also evaluated. No difference was observed in the concentration of sperm submitted to different centrifugation forces. The total percentage of motile sperm was increased after centrifugation at F3 and F4, and the ROS production at F1 was greater than the other forces. When the bulls semen were processed individually, no significant differences were observed for the sperm quality parameters between F1 and F4, including lipid peroxidation, antioxidants, cleavage rate and average time to the first cleavage. This work demonstrated for the first time that centrifugation at 2200×g enhanced the sperm penetration and fertilization rates without reducing sperm recovery compared to the typical centrifugation force (9000×g) currently used by the commercial bovine IVF industry. Copyright © 2014 Elsevier B.V. All rights reserved.

Distributed collaborative environments for virtual capability-based planning

NASA Astrophysics Data System (ADS)

McQuay, William K.

2003-09-01

Distributed collaboration is an emerging technology that will significantly change how decisions are made in the 21st century. Collaboration involves two or more geographically dispersed individuals working together to share and exchange data, information, knowledge, and actions. The marriage of information, collaboration, and simulation technologies provides the decision maker with a collaborative virtual environment for planning and decision support. This paper reviews research that is focusing on the applying open standards agent-based framework with integrated modeling and simulation to a new Air Force initiative in capability-based planning and the ability to implement it in a distributed virtual environment. Virtual Capability Planning effort will provide decision-quality knowledge for Air Force resource allocation and investment planning including examining proposed capabilities and cost of alternative approaches, the impact of technologies, identification of primary risk drivers, and creation of executable acquisition strategies. The transformed Air Force business processes are enabled by iterative use of constructive and virtual modeling, simulation, and analysis together with information technology. These tools are applied collaboratively via a technical framework by all the affected stakeholders - warfighter, laboratory, product center, logistics center, test center, and primary contractor.

Exploration of Force Myography and surface Electromyography in hand gesture classification.

PubMed

Jiang, Xianta; Merhi, Lukas-Karim; Xiao, Zhen Gang; Menon, Carlo

2017-03-01

Whereas pressure sensors increasingly have received attention as a non-invasive interface for hand gesture recognition, their performance has not been comprehensively evaluated. This work examined the performance of hand gesture classification using Force Myography (FMG) and surface Electromyography (sEMG) technologies by performing 3 sets of 48 hand gestures using a prototyped FMG band and an array of commercial sEMG sensors worn both on the wrist and forearm simultaneously. The results show that the FMG band achieved classification accuracies as good as the high quality, commercially available, sEMG system on both wrist and forearm positions; specifically, by only using 8 Force Sensitive Resisters (FSRs), the FMG band achieved accuracies of 91.2% and 83.5% in classifying the 48 hand gestures in cross-validation and cross-trial evaluations, which were higher than those of sEMG (84.6% and 79.1%). By using all 16 FSRs on the band, our device achieved high accuracies of 96.7% and 89.4% in cross-validation and cross-trial evaluations. Copyright © 2017 IPEM. Published by Elsevier Ltd. All rights reserved.

American Association for Emergency Psychiatry Task Force on Medical Clearance of Adults Part I: Introduction, Review and Evidence-Based Guidelines

PubMed Central

Anderson, Eric L.; Nordstrom, Kimberly; Wilson, Michael P.; Peltzer-Jones, Jennifer M.; Zun, Leslie; Ng, Anthony; Allen, Michael H.

2017-01-01

Introduction In the United States, the number of patients presenting to the emergency department (ED) for a mental health concern is significant and expected to grow. The breadth of the medical evaluation of these patients is controversial. Attempts have been made to establish a standard evaluation for these patients, but to date no nationally accepted standards exist. A task force of the American Association of Emergency Psychiatry, consisting of physicians from emergency medicine and psychiatry, and a psychologist was convened to form consensus recommendations on the medical evaluation of psychiatric patients presenting to EDs. Methods The task force reviewed existing literature on the topic of medical evaluation of psychiatric patients in the ED (Part I) and then combined this with expert consensus (Part II). Results In Part I, we discuss terminological issues and existing evidence on medical exams and laboratory studies of psychiatric patients in the ED. Conclusion Emergency physicians should work cooperatively with psychiatric receiving facilities to decrease unnecessary testing while increasing the quality of medical screening exams for psychiatric patients who present to EDs. PMID:28210358

The numerical modeling the sensitivity of coastal wind and ozone concentration to different SST forcing

NASA Astrophysics Data System (ADS)

Choi, Hyun-Jung; Lee, Hwa Woon; Jeon, Won-Bae; Lee, Soon-Hwan

2012-01-01

This study evaluated an atmospheric and air quality model of the spatial variability in low-level coastal winds and ozone concentration, which are affected by sea surface temperature (SST) forcing with different thermal gradients. Several numerical experiments examined the effect of sea surface SST forcing on the coastal atmosphere and air quality. In this study, the RAMS-CAMx model was used to estimate the sensitivity to two different resolutions of SST forcing during the episode day as well as to simulate the low-level coastal winds and ozone concentration over a complex coastal area. The regional model reproduced the qualitative effect of SST forcing and thermal gradients on the coastal flow. The high-resolution SST derived from NGSST-O (New Generation Sea Surface Temperature Open Ocean) forcing to resolve the warm SST appeared to enhance the mean response of low-level winds to coastal regions. These wind variations have important implications for coastal air quality. A higher ozone concentration was forecasted when SST data with a high resolution was used with the appropriate limitation of temperature, regional wind circulation, vertical mixing height and nocturnal boundary layer (NBL) near coastal areas.

Effect of Axial Force on the Performance of Micromachined Vibratory Rate Gyroscopes

PubMed Central

Hou, Zhanqiang; Xiao, Dingbang; Wu, Xuezhong; Dong, Peitao; Chen, Zhihua; Niu, Zhengyi; Zhang, Xu

2011-01-01

It is reported in the published literature that the resonant frequency of a silicon micromachined gyroscope decreases linearly with increasing temperature. However, when the axial force is considerable, the resonant frequency might increase as the temperature increases. The axial force is mainly induced by thermal stress due to the mismatch between the thermal expansion coefficients of the structure and substrate. In this paper, two types of micromachined suspended vibratory gyroscopes with slanted beams were proposed to evaluate the effect of the axial force. One type was suspended with a clamped-free (C-F) beam and the other one was suspended with a clamped-clamped (C-C) beam. Their drive modes are the bending of the slanted beam, and their sense modes are the torsion of the slanted beam. The relationships between the resonant frequencies of the two types were developed. The prototypes were packaged by vacuum under 0.1 mbar and an analytical solution for the axial force effect on the resonant frequency was obtained. The temperature dependent performances of the operated mode responses of the micromachined gyroscopes were measured. The experimental values of the temperature coefficients of resonant frequencies (TCF) due to axial force were 101.5 ppm/°C for the drive mode and 21.6 ppm/°C for the sense mode. The axial force has a great influence on the modal frequency of the micromachined gyroscopes suspended with a C-C beam, especially for the flexure mode. The quality factors of the operated modes decreased with increasing temperature, and changed drastically when the micromachined gyroscopes worked at higher temperatures. PMID:22346578

A Microeconomic Approach to the Issue of Quality in the Teaching Force.

ERIC Educational Resources Information Center

Kim, Hye-Sook

This study approaches the issue of quality in the teaching force using a microeconomic framework that applies the concept of "opportunity cost." As teaching is a low-paid profession, accepting a teaching position may be associated with high opportunity costs (foregone benefits) for more academically talented college students because they could…

The Idyllic Workplace

NASA Technical Reports Server (NTRS)

Schoenfelder, Tony E.

2002-01-01

How many of us have worked in organizations where the discipline was so rigid and unyielding that it would send even a Marine Corps Drill Instructor screaming into the night? How many of us have worked in organizations where sightings of senior management were sporadic and rare, and any other interactions were by appointment only? Or, how many of us have worked in organizations where your role, absent specific direction, was to be seldom seen and rarely heard? And how many of us have worked in organizations where seemingly light itself was not permitted to escape without the acquiescence and approval of the director? Sadly, there are organizations that embody some of these conditions, and the resultant adverse effects on employee productivity, creativity and morale are profound. But what if you could work in an organization in which there was little hierarchy, where rank and seniority played no part, where there were no closed meetings or doors, where everyone knows what was expected of them, and where creativity was not only tolerated but encouraged and celebrated? Was there ever such a place? There was, and it was known as NASA's Space Station Task Force. I was fortunate enough to work there for a time, and I would like to tell you how this organization with few apparent rules led to incredibly high levels of employee satisfaction and fulfillment, and yielded work products of enduring quality. On May 20, 1982, NASA Administrator James M. Beggs established the Space Station Task Force under the direction of John D. Hodge. The Task Force was charged with the responsibility for "the development of the programmatic aspects of a Space Station as they evolve, including mission analysis, requirements definition and program management," and was authorized to draw on Space Station activities at the NASA Program Offices and Field Centers. No additional conditions or directions were provided. Hodge knew that in order to accomplish the job he had been given, he was going to have to obtain the services of the "best and the brightest" and facilitate the unleashing of the full force of their creative capabilities. In order to avoid the stultifying effects of a typical hierarchical organization, he set up a loosely structured, horizontal organization with only one supervisor of record - himself. He populated this organization with detailees from Headquarters, the field Centers and the Jet Propulsion Lab, thereby assuring himself of the political and technical expertise with which to deal with Congress and the bureaucracy, and conduct the required engineering studies and analyses.

Towards a Learning Workforce: A Policy Discussion Paper on Adult Learners at Work.

ERIC Educational Resources Information Center

Tuckett, Alan

There is widespread agreement in Great Britain that the work force must receive more skills training if the country is to be competitive in the future. Of special concern is the 70 percent of the work force who left school at the earliest possible opportunity, and the (overlapping) 70 percent of the work force who have not received training for a…

Part-time careers in academic internal medicine: a report from the association of specialty professors part-time careers task force on behalf of the alliance for academic internal medicine.

PubMed

Linzer, Mark; Warde, Carole; Alexander, R Wayne; Demarco, Deborah M; Haupt, Allison; Hicks, Leroi; Kutner, Jean; Mangione, Carol M; Mechaber, Hilit; Rentz, Meridith; Riley, Joanne; Schuster, Barbara; Solomon, Glen D; Volberding, Paul; Ibrahim, Tod

2009-10-01

To establish guidelines for more effectively incorporating part-time faculty into departments of internal medicine, a task force was convened in early 2007 by the Association of Specialty Professors. The task force used informal surveys, current literature, and consensus building among members of the Alliance for Academic Internal Medicine to produce a consensus statement and a series of recommendations. The task force agreed that part-time faculty could enrich a department of medicine, enhance workforce flexibility, and provide high-quality research, patient care, and education in a cost-effective manner. The task force provided a series of detailed steps for operationalizing part-time practice; to do so, key issues were addressed, such as fixed costs, malpractice insurance, space, cross-coverage, mentoring, career development, productivity targets, and flexible scheduling. Recommendations included (1) increasing respect for work-family balance, (2) allowing flexible time as well as part-time employment, (3) directly addressing negative perceptions about part-time faculty, (4) developing policies to allow flexibility in academic advancement, (5) considering part-time faculty as candidates for leadership positions, (6) encouraging granting agencies, including the National Institutes of Health and Veterans Administration, to consider part-time faculty as eligible for research career development awards, and (7) supporting future research in "best practices" for incorporating part-time faculty into academic departments of medicine.

Age Management and Sustainable Careers for the Improvement of the Quality of Ageing at Work.

PubMed

Marcaletti, Francesco

2014-01-01

Prolonging working careers by increasing the statutory age for retirement has become compulsory in most Western societies in order to tackle the shrinking of the labour force, preserve economic productivity, foster knowledge transfer and reduce the risks of financial imbalances in social security systems. This imperative currently results in working careers that already exceed 40 years and come to an end after the age of 65 (e.g. in Italy). Over the next few decades, both career length and retirement age are expected to rise. Thus, creating more inclusive workplaces by increasing their quality is the precondition of a win-win situation for both employers and employees, regardless of age. A request for support in the development of sustainable careers from both private and public labour organisations has led to innovating the mainstream methodologies and research tools in the field of age management. Based on the key elements of the mainstream "work ability concept" - i.e. health, competencies, motivation and work organisation - the Quality of Ageing at Work questionnaire (QAW-q), developed by a team from the WWELL Research Centre, broadens its perspective by surveying elements bridging intra-organisational dimensions and which affect employees' conditions and external socio-institutional constraints: i.e. work-life balance, economic stability, professional identity and relationships in the workplace. The QAW-q is designed to analyse the influence of the different meanings of age (chronological age, seniority within the company and in the labour market) and correlate them with the different dimensions at individual and organisational levels; all these dimensions are weighted by the effect exerted by the passage of time. The results of the QAW-q survey, taken by employees of both private and public companies, serve as a basis for the implementation of measures addressing all the relevant dimensions of the human resource management cycle.

Work-related risk factors for specific shoulder disorders: a systematic review and meta-analysis.

PubMed

van der Molen, Henk F; Foresti, Chiara; Daams, Joost G; Frings-Dresen, Monique H W; Kuijer, P Paul F M

2017-10-01

The objective of this systematic review and meta-analysis is to examine which work-related risk factors are associated with specific soft tissue shoulder disorders. We searched the electronic databases of Medline and Embase for articles published between 2009 and 24 March 2016 and included the references of a systematic review performed for the period before 2009. Primary cross-sectional and longitudinal studies were included when outcome data were described in terms of clinically assessed soft tissue shoulder disorders and at least two levels of work-related exposure were mentioned (exposed vs less or non-exposed). Two authors independently selected studies, extracted data and assessed study quality. For longitudinal studies, we performed meta-analyses and used GRADE (Grades of Recommendations, Assessment, Development and Evaluation) to assess the evidence for the associations between risk factors and the onset of shoulder disorders. Twenty-seven studies met the inclusion criteria. In total, 16 300 patients with specific soft tissue shoulder disorders from a population of 2 413 722 workers from Denmark, Finland, France, Germany and Poland were included in the meta-analysis of one case-control and six prospective cohort studies. This meta-analysis revealed moderate evidence for associations between shoulder disorders and arm-hand elevation (OR=1.9, 95% CI 1.47 to 2.47) and shoulder load (OR=2.0, 95% CI 1.90 to 2.10) and low to very low evidence for hand force exertion (OR=1.5, 95% CI 1.25 to 1.87), hand-arm vibration (OR=1.3, 95% CI 1.01 to 1.77), psychosocial job demands (OR=1.1, 95% CI 1.01 to 1.25) and working together with temporary workers (OR=2.2, 95% CI 1.2 to 4.2). Low-quality evidence for no associations was found for arm repetition, social support, decision latitude, job control and job security. Moderate evidence was found that arm-hand elevation and shoulder load double the risk of specific shoulder disorders. Low to very-low-quality evidence was found for an association between hand force exertion, hand-arm vibration, psychosocial job demands and working together with temporary workers and the incidence of specific shoulder disorders. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

The Changing Work Force. Trends and Issues Alerts.

ERIC Educational Resources Information Center

Lankard, Bettina A.

Economic pressures, work force diversity, and advances in technology are changing the nature of work and organizational policy and management. A predicted decline in the annual growth in gross national product is expected to trigger a slowdown in the labor force, especially in occupations that employ workers with only a high school education.…

[Fact Sheets on Working Women].

ERIC Educational Resources Information Center

National Commission on Working Women, Washington, DC.

These four fact sheets address a number of issues relating to women in the work force. The first, "An Overview of Women in the Work Force," offers a look at the numbers of women in the labor force, the occupational categories represented by women workers, women in professional and nonprofessional occupations, and women in nontraditional…

America's Changing Work Force. Statistics in Brief.

ERIC Educational Resources Information Center

American Association of Retired Persons, Washington, DC.

This booklet provides information about the changing work force. It offers a profile of workers aged 45 and older, as well as likely changes in the work force of the future. Tables and graphs illustrate the following: profile of Americans aged 50 and older, by employment status; employment status of the civilian noninstitutional population by age…

Three Methods of Assessing Values for Advance Care Planning

PubMed Central

Karel, Michele J.; Moye, Jennifer; Bank, Adam; Azar, Armin R.

2016-01-01

Advance care planning ideally includes communication about values between patients, family members, and care providers. This study examined the utility of health care values assessment tools for older adults with and without dementia. Adults aged 60 and older, with and without dementia, completed three values assessment tools—open-ended, forced-choice, and rating scale questions—and named a preferred surrogate decision maker. Responses to forced-choice items were examined at 9-month retest. Adults with and without dementia appeared equally able to respond meaningfully to questions about values regarding quality of life and health care decisions. People with dementia were generally as able as controls to respond consistently after 9 months. Although values assessment methods show promise, further item and scale development work is needed. Older adults with dementia should be included in clarifying values for advance care planning to the extent that they desire and are able. PMID:17215205

The chocolate-colored expanse of Rogers Dry Lake frames the sleek lines of the Boeing / NASA X-48B subscale demonstrator during a test flight at Edwards AFB

NASA Image and Video Library

2007-08-14

Boeing Phantom Works' subscale Blended Wing Body technology demonstration aircraft began its initial flight tests from NASA's Dryden Flight Research Center at Edwards Air Force Base, Calif. in the summer of 2007. The 8.5 percent dynamically scaled unmanned aircraft, designated the X-48B by the Air Force, is designed to mimic the aerodynamic characteristics of a full-scale large cargo transport aircraft with the same blended wing body shape. The initial flight tests focused on evaluation of the X-48B's low-speed flight characteristics and handling qualities. About 25 flights were planned to gather data in these low-speed flight regimes. Based on the results of the initial flight test series, a second set of flight tests was planned to test the aircraft's low-noise and handling characteristics at transonic speeds.

Feedback control in deep drawing based on experimental datasets

NASA Astrophysics Data System (ADS)

Fischer, P.; Heingärtner, J.; Aichholzer, W.; Hortig, D.; Hora, P.

2017-09-01

In large-scale production of deep drawing parts, like in automotive industry, the effects of scattering material properties as well as warming of the tools have a significant impact on the drawing result. In the scope of the work, an approach is presented to minimize the influence of these effects on part quality by optically measuring the draw-in of each part and adjusting the settings of the press to keep the strain distribution, which is represented by the draw-in, inside a certain limit. For the design of the control algorithm, a design of experiments for in-line tests is used to quantify the influence of the blank holder force as well as the force distribution on the draw-in. The results of this experimental dataset are used to model the process behavior. Based on this model, a feedback control loop is designed. Finally, the performance of the control algorithm is validated in the production line.

The impact of working technique on physical loads - an exposure profile among newspaper editors.

PubMed

Lindegård, A; Wahlström, J; Hagberg, M; Hansson, G-A; Jonsson, P; Wigaeus Tornqvist, E

2003-05-15

The aim of this study was to investigate the possible associations between working technique, sex, symptoms and level of physical load in VDU-work. A study group of 32 employees in the editing department of a daily newspaper answered a questionnaire, about physical working conditions and symptoms from the neck and the upper extremities. Muscular load, wrist positions and computer mouse forces were measured. Working technique was assessed from an observation protocol for computer work. In addition ratings of perceived exertion and overall comfort were collected. The results showed that subjects classified as having a good working technique worked with less muscular load in the forearm (extensor carpi ulnaris p=0.03) and in the trapezius muscle on the mouse operating side (p=0.02) compared to subjects classified as having a poor working technique. Moreover there were no differences in gap frequency (number of episodes when muscle activity is below 2.5% of a reference contraction) or muscular rest (total duration of gaps) between the two working technique groups. Women in this study used more force (mean force p=0.006, peak force p=0.02) expressed as % MVC than the men when operating the computer mouse. No major differences were shown in muscular load, wrist postures, perceived exertion or perceived comfort between men and women or between cases and symptom free subjects. In conclusion a good working technique was associated with reduced muscular load in the forearm muscles and in the trapezius muscle on the mouse operating side. Moreover women used more force (mean force and peak force) than men when operating the click button (left button) of the computer mouse.

Defining Conditions for the Use of Persistent Surveillance

DTIC Science & Technology

2009-12-01

as hard as the Air Force has worked the North Dakota and Ohio delegations,’ says Colonel Charles Bartlett, head of a special Air Force task force on...UAVs…While Richard Shelby , the Republican senator from Alabama, is concerned about the impact on Redstone Arsenal, which manages much of the Army’s...UAV work, Byron Dorgan, the North Dakota Democratic senator, wants to attract more work for Grand Forks Air Force base, partly to make up for the

Workplace management of upper limb disorders: a systematic review.

PubMed

Dick, F D; Graveling, R A; Munro, W; Walker-Bone, K

2011-01-01

Upper limb pain is common among working-aged adults and a frequent cause of absenteeism. To systematically review the evidence for workplace interventions in four common upper limb disorders. Systematic review of English articles using Medline, Embase, Cinahl, AMED, Physiotherapy Evidence Database PEDro (carpal tunnel syndrome and non-specific arm pain only) and Cochrane Library. Study inclusion criteria were randomized controlled trials, cohort studies or systematic reviews employing any workplace intervention for workers with carpal tunnel syndrome, non-specific arm pain, extensor tenosynovitis or lateral epicondylitis. Papers were selected by a single reviewer and appraised by two reviewers independently using methods based on Scottish Intercollegiate Guidelines Network (SIGN) methodology. 1532 abstracts were identified, 28 papers critically appraised and four papers met the minimum quality standard (SIGN grading + or ++) for inclusion. There was limited evidence that computer keyboards with altered force displacement characteristics or altered geometry were effective in reducing carpal tunnel syndrome symptoms. There was limited, but high quality, evidence that multi-disciplinary rehabilitation for non-specific musculoskeletal arm pain was beneficial for those workers absent from work for at least four weeks. In adults with tenosynovitis there was limited evidence that modified computer keyboards were effective in reducing symptoms. There was a lack of high quality evidence to inform workplace management of lateral epicondylitis. Further research is needed focusing on occupational management of upper limb disorders. Where evidence exists, workplace outcomes (e.g. successful return to pre-morbid employment; lost working days) are rarely addressed.

Assessment of Indoor Air Quality Problems in Office-Like Environments: Role of Occupational Health Services.

PubMed

Carrer, Paolo; Wolkoff, Peder

2018-04-12

There is an increasing concern about indoor air quality (IAQ) and its impact on health, comfort, and work-performance in office-like environments and their workers, which account for most of the labor force. The Scientific Committee on Indoor Air Quality and Health of the ICOH (Int. Comm. Occup. Health) has discussed the assessment and management of IAQ problems and proposed a stepwise approach to be conducted by a multidisciplinary team. It is recommended to integrate the building assessment, inspection by walk-through of the office workplace, questionnaire survey, and environmental measurements, in that order. The survey should cover perceived IAQ, symptoms, and psychosocial working aspects. The outcome can be used for mapping the IAQ and to prioritize the order in which problems should be dealt with. Individual health surveillance in relation to IAQ is proposed only when periodical health surveillance is already performed for other risks (e.g., video display units) or when specific clinical examination of workers is required due to the occurrence of diseases that may be linked to IAQ (e.g., Legionnaire's disease), recurrent inflammation, infections of eyes, respiratory airway effects, and sensorial disturbances. Environmental and personal risk factors should also be compiled and assessed. Workplace health promotion should include programs for smoking cessation and stress and IAQ management.

Assessment of Indoor Air Quality Problems in Office-Like Environments: Role of Occupational Health Services

PubMed Central

2018-01-01

There is an increasing concern about indoor air quality (IAQ) and its impact on health, comfort, and work-performance in office-like environments and their workers, which account for most of the labor force. The Scientific Committee on Indoor Air Quality and Health of the ICOH (Int. Comm. Occup. Health) has discussed the assessment and management of IAQ problems and proposed a stepwise approach to be conducted by a multidisciplinary team. It is recommended to integrate the building assessment, inspection by walk-through of the office workplace, questionnaire survey, and environmental measurements, in that order. The survey should cover perceived IAQ, symptoms, and psychosocial working aspects. The outcome can be used for mapping the IAQ and to prioritize the order in which problems should be dealt with. Individual health surveillance in relation to IAQ is proposed only when periodical health surveillance is already performed for other risks (e.g., video display units) or when specific clinical examination of workers is required due to the occurrence of diseases that may be linked to IAQ (e.g., Legionnaire’s disease), recurrent inflammation, infections of eyes, respiratory airway effects, and sensorial disturbances. Environmental and personal risk factors should also be compiled and assessed. Workplace health promotion should include programs for smoking cessation and stress and IAQ management. PMID:29649167

The administrative and clinical rationale for the total organization approach to continuous quality improvement.

PubMed

Jones, D J; Ziegenfuss, J T

1993-01-01

In our view TQM and CQI represent important innovations in the continuing effort to develop higher performance organizations. Never before has the need been so great to improve quality while at the same time constraining, or reducing, costs. An increasing number of health care organizations can document their experiences that as quality goes up, costs can come down. The contribution of these new approaches is in some sense the wedding of many long established methodologies--the scientific method, statistical quality control, planning, joint problem solving, participative management, and empowerment of the work force. While this recognition could lend support to those who label this new model a fad, that perception denies the linkage of TQM/CQI to the greater stream of innovations pushing us toward ever-greater organizational excellence. Can we not take the philosophy and methods that are potentially useful and try them experimentally? Let our empirical tests tell us of their contribution. We believe the concepts and procedures of TQM/CQI will help us to be better in years to come, even though we highly respect our starting point.

Shift work and the assessment and management of shift work disorder (SWD).

PubMed

Wright, Kenneth P; Bogan, Richard K; Wyatt, James K

2013-02-01

Nearly 20% of the labor force worldwide, work shifts that include work hours outside 07:00 h to 18:00 h. Shift work is common in many occupations that directly affect the health and safety of others (e.g., protective services, transportation, healthcare), whereas quality of life, health, and safety during shift work and the commute home can affect workers in any field. Increasing evidence indicates that shift-work schedules negatively influence worker physiology, health, and safety. Shift work disrupts circadian sleep and alerting cycles, resulting in disturbed daytime sleep and excessive sleepiness during the work shift. Moreover, shift workers are at risk for shift work disorder (SWD). This review focuses on shift work and the assessment and management of sleepiness and sleep disruption associated with shift work schedules and SWD. Management strategies include approaches to promote sleep, wakefulness, and adaptation of the circadian clock to the imposed work schedule. Additional studies are needed to further our understanding of the mechanisms underlying the health risks of shift work, understanding which shift workers are at most risk of SWD, to investigate treatment options that address the health and safety burdens associated with shift work and SWD, and to further develop and assess the comparative effectiveness of countermeasures and treatment options. Copyright © 2012 Elsevier Ltd. All rights reserved.

Health Effects of Shift Work

PubMed Central

LaDou, Joseph

1982-01-01

More than 13.5 million American workers, close to 20 percent of the work force, are assigned to evening or night shifts. In some industries such as automobile, petrochemical and textile manufacturing the proportion of shift workers is greater than 50 percent. As the popularity of shift work and other “alternative work schedules” grows, concern is increasing over the disturbance created in the lives of workers and their families by these economically and socially useful innovations. Twenty percent of workers are unable to tolerate shift work. Daily physiologic variations termed circadian rhythms are interactive and require a high degree of phase relationship to produce subjective feelings of wellbeing. Disturbance of these activities, circadian desynchronization, whether from passage over time zones or from shift rotation, results in health effects such as disturbance of the quantity and quality of sleep, disturbance of gastrointestinal and other organ system activities, and aggravation of diseases such as diabetes mellitus, epilepsy and thyrotoxicosis. Worker selection can reduce the number of health problems resulting from shift work. The periodic examination of shift workers is recommended. PMID:6962577

Statistics of work performed on a forced quantum oscillator.

PubMed

Talkner, Peter; Burada, P Sekhar; Hänggi, Peter

2008-07-01

Various aspects of the statistics of work performed by an external classical force on a quantum mechanical system are elucidated for a driven harmonic oscillator. In this special case two parameters are introduced that are sufficient to completely characterize the force protocol. Explicit results for the characteristic function of work and the corresponding probability distribution are provided and discussed for three different types of initial states of the oscillator: microcanonical, canonical, and coherent states. Depending on the choice of the initial state the probability distributions of the performed work may greatly differ. This result in particular also holds true for identical force protocols. General fluctuation and work theorems holding for microcanonical and canonical initial states are confirmed.

Mitigated-force carriage for high magnetic field environments

DOEpatents

Ludtka, Gerard M.; Ludtka, Gail M.; Wilgen, John B.; Murphy, Bart L.

2015-05-19

A carriage for high magnetic field environments includes a plurality of work-piece separators disposed in an operable relationship with a work-piece processing magnet having a magnetic field strength of at least 1 Tesla for supporting and separating a plurality of work-pieces by a preselected, essentially equal spacing, so that, as a first work-piece is inserted into the magnetic field, a second work-piece is simultaneously withdrawn from the magnetic field, so that an attractive magnetic force imparted on the first work-piece offsets a resistive magnetic force imparted on the second work-piece.

Regional Quality Assurance Activity in Higher Education in Southeast Asia: Its Characteristics and Driving Forces

ERIC Educational Resources Information Center

Umemiya, Naoki

2008-01-01

This article analyses the characteristics and driving forces of regional quality assurance activity in Southeast Asia, which has been actively promoted in recent years by the ASEAN University Network, an organisation for higher education under the auspices of the Association of Southeast Asian Nations (ASEAN). There are now more collaborative…

Proposals for Strengthening the Associate Degree: Staff Analysis of a Report from the Task Force on Academic Quality.

ERIC Educational Resources Information Center

Farland, Ronnald W.

This staff analysis by the Office of the Chancellor of the California Community Colleges discusses and offers recommendations concerning the report, "Proposals for Strengthening the Associate Degree in the California Community Colleges," by the Task Force on Academic Quality. The paper begins with brief staff comments on the associate…

A Novel Approach for Enhancement of Automobile Clutch Engagement Quality Using Mechatronics Based Automated Clutch System

NASA Astrophysics Data System (ADS)

Tripathi, K.

2013-01-01

In automated manual clutch (AMC) a mechatronic system controls clutch force trajectory through an actuator governed by a control system. The present study identifies relevant characteristics of this trajectory and their effects on driveline dynamics and engagement quality. A new type of force trajectory is identified which gives the good engagement quality. However this trajectory is not achievable through conventional clutch control mechanism. But in AMC a mechatronic system based on electro-hydraulic or electro-mechanical elements can make it feasible. A mechatronic system is presented in which a mechatronic add-on system can be used to implement the novel force trajectory, without the requirement of replacing the traditional diaphragm spring based clutch in a vehicle with manual transmission.

An initiative to improve the management of clinically significant test results in a large health care network.

PubMed

Roy, Christopher L; Rothschild, Jeffrey M; Dighe, Anand S; Schiff, Gordon D; Graydon-Baker, Erin; Lenoci-Edwards, Jennifer; Dwyer, Cheryl; Khorasani, Ramin; Gandhi, Tejal K

2013-11-01

The failure of providers to communicate and follow up clinically significant test results (CSTR) is an important threat to patient safety. The Massachusetts Coalition for the Prevention of Medical Errors has endorsed the creation of systems to ensure that results can be received and acknowledged. In 2008 a task force was convened that represented clinicians, laboratories, radiology, patient safety, risk management, and information systems in a large health care network with the goals of providing recommendations and a road map for improvement in the management of CSTR and of implementing this improvement plan during the sub-force sequent five years. In drafting its charter, the task broadened the scope from "critical" results to "clinically significant" ones; clinically significant was defined as any result that requires further clinical action to avoid morbidity or mortality, regardless of the urgency of that action. The task force recommended four key areas for improvement--(1) standardization of policies and definitions, (2) robust identification of the patient's care team, (3) enhanced results management/tracking systems, and (4) centralized quality reporting and metrics. The task force faced many challenges in implementing these recommendations, including disagreements on definitions of CSTR and on who should have responsibility for CSTR, changes to established work flows, limitations of resources and of existing information systems, and definition of metrics. This large-scale effort to improve the communication and follow-up of CSTR in a health care network continues with ongoing work to address implementation challenges, refine policies, prepare for a new clinical information system platform, and identify new ways to measure the extent of this important safety problem.

Morphology and force probing of primary murine liver sinusoidal endothelial cells.

PubMed

Zapotoczny, B; Owczarczyk, K; Szafranska, K; Kus, E; Chlopicki, S; Szymonski, M

2017-07-01

Liver sinusoidal endothelial cells (LSECs) represent unique type of endothelial cells featured by their characteristic morphology, ie, lack of a basement membrane and presence of fenestrations-transmembrane pores acting as a dynamic filter between the vascular space and the liver parenchyma. Delicate structure of LSECs membrane combined with a submicron size of fenestrations hinders their visualization in live cells. In this work, we apply atomic force microscopy contact mode to characterize fenestrations in LSECs. We reveal the structure of fenestrations in live LSECs. Moreover, we show that the high-resolution imaging of fenestrations is possible for the glutaraldehyde-fixed LSECs. Finally, thorough information about the morphology of LSECs including great contrast in visualization of sieve plates and fenestrations is provided using Force Modulation mode. We show also the ability to precisely localize the cell nuclei in fixed LSECs. It can be helpful for more precise description of nanomechanical properties of cell nuclei using atomic force microscopy. Presented methodology combining high-quality imaging of fixed cells with an additional nanomechanical information of both live and fixed LSECs provides a unique approach to study LSECs morphology and nanomechanics that could foster understanding of the role of LSECs in maintaining liver homeostasis. Copyright © 2017 John Wiley & Sons, Ltd.

Physical training in children with osteogenesis imperfecta.

PubMed

Van Brussel, Marco; Takken, Tim; Uiterwaal, Cuno S P M; Pruijs, Hans J; Van der Net, Janjaap; Helders, Paul J M; Engelbert, Raoul H H

2008-01-01

To study the effects of a physical training program on exercise capacity, muscle force, and subjective fatigue levels in patients with mild to moderate forms of osteogenesis imperfecta (OI). Thirty-four children with OI type I or IV were randomly assigned to either a 12-week graded exercise program or care as usual for 3 months. Exercise capacity and muscle force were studied; subjective fatigue, perceived competence, and health-related quality of life were secondary outcomes. All outcomes were measured at baseline (T = 0), after intervention (T = 1), and after 6 and 9 months (T = 2 and T = 3, respectively). After intervention (T = 1), peak oxygen consumption (VO2peak), relative VO2peak (VO2peak/kg), maximal working capacity (Wmax), and muscle force were significantly improved (17%, 18%, 10%, and 12%, respectively) compared with control values. Subjective fatigue decreased borderline statistically significantly. Follow-up at T = 2 showed a significant decrease of the improvements measured at T = 1 of VO2peak, but VO2peak/kg, Wmax, and subjective fatigue showed no significant difference. At T = 3, we found a further decrease of the gained improvements. A supervised training program can improve aerobic capacity and muscle force and reduces levels of subjective fatigue in children with OI type I and IV in a safe and effective manner.

Surface Roughness Model Based on Force Sensors for the Prediction of the Tool Wear

PubMed Central

de Agustina, Beatriz; Rubio, Eva María; Sebastián, Miguel Ángel

2014-01-01

In this study, a methodology has been developed with the objective of evaluating the surface roughness obtained during turning processes by measuring the signals detected by a force sensor under the same cutting conditions. In this way, the surface quality achieved along the process is correlated to several parameters of the cutting forces (thrust forces, feed forces and cutting forces), so the effect that the tool wear causes on the surface roughness is evaluated. In a first step, the best cutting conditions (cutting parameters and radius of tool) for a certain quality surface requirement were found for pieces of UNS A97075. Next, with this selection a model of surface roughness based on the cutting forces was developed for different states of wear that simulate the behaviour of the tool throughout its life. The validation of this model reveals that it was effective for approximately 70% of the surface roughness values obtained. PMID:24714391

Searching for a new ionomer for 3D printable ionic polymer-metal composites: Aquivion as a candidate

NASA Astrophysics Data System (ADS)

Trabia, Sarah; Olsen, Zakai; Kim, Kwang J.

2017-11-01

The work presented in this paper introduces Aquivion as a potential candidate for additive manufacturing of ionomeric polymers for the application of IPMCs. First, Aquivion was characterized and compared with Nafion to show that it has the similar qualities, with the major difference being the ionic conductivity. Ionic polymer-metal composites (IPMCs) were fabricated using off-the-shelf membranes of Nafion and Aquivion. The actuation tests showed improved performance for an IPMC with Aquivion as the base compared to an IPMC with a Nafion base. With these results in mind, additive manufacturing of unique shapes using Aquivion filament was studied. A 3D printer was modified to work with Aquivion filament and the polymer was printed into various shapes. Using the printed membranes, IPMCs were fabricated using an electroless plating process. Nafion-based and printed Aquivion-based IPMCs were tested for their performance in back relaxation, frequency driven actuation, blocking force, and mechano-electric sensing. The printed Aquivion-based IPMCs performed comparably to Nafion-based IPMC in back relaxation and showed significantly improved performance in frequency driven actuation, blocking force generation, and mechano-electric sensing.

From rhetoric to reality: consumer engagement in 16 multi-stakeholder alliances.

PubMed

Greene, Jessica; Farley, Diane C; Christianson, Jon B; Scanlon, Dennis P; Shi, Yunfeng

2016-08-01

A key component of the Aligning Forces for Quality (AF4Q) program was engaging consumers in their health and healthcare. We examined the extent to which the alliances embraced 4 areas of consumer engagement: self-management, consumer friendliness of reports of healthcare provider quality, involvement of consumers in alliance governance, and the integration of consumers into quality improvement teams. We used a largely qualitative approach. The evaluation team conducted 1100 in-depth interviews with alliance stakeholders. Two authors reviewed the consumer engagement data for each alliance to assess its level of embrace in the 4 consumer engagement areas. For consumer friendliness of public reporting websites, we also assessed alliance public reports for reading level, technical language, and evaluable displays. Population-level effects were also examined for self-management and public reporting. Consumer engagement was new to most alliances, and few had staff with consumer engagement expertise or existing consumer constituencies. For each area of consumer engagement, some alliances enthusiastically embraced the work, other alliances made a concerted but limited effort to develop programs, and a third group of alliances did the minimum work required. Integrating consumers into governance was the area most often embraced, followed by making public reports consumer friendly. Two alliances strongly embraced both self-management and integrating patients into quality improvement efforts. The AF4Q program did not have greater population level effects from self-management or public reporting than were those observed in a national comparison sample. The AF4Q program sparked a few alliances to develop robust consumer engagement programming, while most alliances tried consumer engagement efforts for the first time and developed an appreciation for integrating consumer perspectives into their work.

Physician-centered management guidelines.

PubMed

Pulde, M F

1999-01-01

The "Fortune 500 Most Admired" companies fully understand the irreverent premise "the customer comes second" and that there is a direct correlation between a satisfied work force and productivity, service quality, and, ultimately, organizational success. If health care organizations hope to recruit and retain the quality workforce upon which their core competency depends, they must develop a vision strategic plan, organizational structure, and managerial style that acknowledges the vital and central role of physicians in the delivery of care. This article outlines a conceptual framework for effective physician management, a "critical pathway," that will enable health care organizations to add their name to the list of "most admired." The nine principles described in this article are based on a more respectful and solicitous treatment of physicians and their more central directing role in organizational change. They would permit the transformation of health care into a system that both preserves the virtues of the physician-patient relationship and meets the demand for quality and cost-effectiveness.

An empirical assessment of high-performing medical groups: results from a national study.

PubMed

Shortell, Stephen M; Schmittdiel, Julie; Wang, Margaret C; Li, Rui; Gillies, Robin R; Casalino, Lawrence P; Bodenheimer, Thomas; Rundall, Thomas G

2005-08-01

The performance of medical groups is receiving increased attention. Relatively little conceptual or empirical work exists that examines the various dimensions of medical group performance. Using a national database of 693 medical groups, this article develops a scorecard approach to assessing group performance and presents a theory-driven framework for differentiating between high-performing versus low-performing medical groups. The clinical quality of care, financial performance, and organizational learning capability of medical groups are assessed in relation to environmental forces, resource acquisition and resource deployment factors, and a quality-centered culture. Findings support the utility of the performance scorecard approach and identification of a number of key factors differentiating high-performing from low-performing groups including, in particular, the importance of a quality-centered culture and the requirement of outside reporting from third party organizations. The findings hold a number of important implications for policy and practice, and the framework presented provides a foundation for future research.

Drilling force and temperature of bone under dry and physiological drilling conditions

NASA Astrophysics Data System (ADS)

Xu, Linlin; Wang, Chengyong; Jiang, Min; He, Huiyu; Song, Yuexian; Chen, Hanyuan; Shen, Jingnan; Zhang, Jiayong

2014-11-01

Many researches on drilling force and temperature have been done with the aim to reduce the labour intensiveness of surgery, avoid unnecessary damage and improve drilling quality. However, there has not been a systematic study of mid- and high-speed drilling under dry and physiological conditions(injection of saline). Furthermore, there is no consensus on optimal drilling parameters. To study these parameters under dry and physiological drilling conditions, pig humerus bones are drilled with medical twist drills operated using a wide range of drilling speeds and feed rates. Drilling force and temperature are measured using a YDZ-II01W dynamometer and a NEC TVS-500EX thermal infrared imager, respectively, to evaluate internal bone damage. To evaluate drilling quality, bone debris and hole morphology are observed by SEM(scanning electron microscopy). Changes in drilling force and temperature give similar results during drilling such that the value of each parameter peaks just before the drill penetrates through the osteon of the compact bone into the trabeculae of the spongy bone. Drilling temperatures under physiological conditions are much lower than those observed under dry conditions, while a larger drilling force occurs under physiological conditions than dry conditions. Drilling speed and feed rate have a significant influence on drilling force, temperature, bone debris and hole morphology. The investigation of the effect of drilling force and temperature on internal bone damage reveals that a drilling speed of 4500 r/min and a feed rate of 50 mm/min are recommended for bone drilling under physiological conditions. Drilling quality peaks under these optimal parameter conditions. This paper proposes the optimal drilling parameters under mid- and high-speed surgical drilling, considering internal bone damage and drilling quality, which can be looked as a reference for surgeons performing orthopedic operations.

Experimental estimation of energy absorption during heel strike in human barefoot walking.

PubMed

Baines, Patricia M; Schwab, A L; van Soest, A J

2018-01-01

Metabolic energy expenditure during human gait is poorly understood. Mechanical energy loss during heel strike contributes to this energy expenditure. Previous work has estimated the energy absorption during heel strike as 0.8 J using an effective foot mass model. The aim of our study is to investigate the possibility of determining the energy absorption by more directly estimating the work done by the ground reaction force, the force-integral method. Concurrently another aim is to compare this method of direct determination of work to the method of an effective foot mass model. Participants of our experimental study were asked to walk barefoot at preferred speed. Ground reaction force and lower leg kinematics were collected at high sampling frequency (3000 Hz; 1295 Hz), with tight synchronization. The work done by the ground reaction force is 3.8 J, estimated by integrating this force over the foot-ankle deformation. The effective mass model is improved by dropping the assumption that foot-ankle deformation is maximal at the instant of the impact force peak. On theoretical grounds it is clear that in the presence of substantial damping that peak force and peak deformation do not occur simultaneously. The energy absorption results, due the vertical force only, corresponding to the force-integral method is similar to the results of the improved application of the effective mass model (2.7 J; 2.5 J). However the total work done by the ground reaction force calculated by the force-integral method is significantly higher than that of the vertical component alone. We conclude that direct estimation of the work done by the ground reaction force is possible and preferable over the use of the effective foot mass model. Assuming that energy absorbed is lost, the mechanical energy loss of heel strike is around 3.8 J for preferred walking speeds (≈ 1.3 m/s), which contributes to about 15-20% of the overall metabolic cost of transport.

Occupational safety and health objectives of Healthy People 2010: a systematic approach for occupational health nurses--Part II.

PubMed

Olszewski, Kimberly; Parks, Carol; Chikotas, Noreen E

2007-03-01

Occupational safety and health objectives 20.6 through 20.11 focus on reducing work-related assaults, lead exposure, skin diseases and disorders, needlestick injuries, and work-related, noise-induced hearing loss and promoting worksite stress reduction programs. Using the intervention strategies provided, occupational health nurses can play a key role in reducing workplace-related injury, disease, disability, and death. variety of resources pertaining to occupational health and safety from the federal, national, health care, nursing, and environmental realms can assist occupational health nurses in developing and implementing programs appropriate for their workplaces. Through the Healthy People 2010 occupational health and safety objectives, occupational health nurses have the opportunity to develop and implement workplace policies and programs promoting not only a safe and healthy work environment but also improved health and disease prevention. Occupational health nurses can implement strategies to increase quality and years of life and eliminate health disparities in the American work force.

Work and power outputs determined from pedalling and flywheel friction forces during brief maximal exertion on a cycle ergometer.

PubMed

Hibi, N; Fujinaga, H; Ishii, K

1996-01-01

Work and power outputs during short-term, maximal exertion on a friction loaded cycle ergometer are usually calculated from the friction force applied to the flywheel. The inertia of the flywheel is sometimes taken into consideration, but the effects of internal resistances and other factors have been ignored. The purpose of this study was to estimate their effects by comparing work or power output determined from the force exerted on the pedals (pedalling force) with work or power output determined from the friction force and the moment of inertia of the rotational parts. A group of 22 male college students accelerated a cycle ergometer as rapidly as possible for 3 s. The total work output determined from the pedalling force (TWp) was significantly greater than that calculated from the friction force and the moment of inertia (TWf). Power output determined from the pedalling force during each pedal stroke (SPp) was also significantly greater than that calculated from the friction force and the moment of inertia. Percentage difference (% diff), defined by % diff = ¿(TWp - TWf)/TWf¿ x 100, ranged from 16.8% to 49.3% with a mean value of 30.8 (SD 9.1)%. It was observed that % diff values were higher in subjects with greater TWp or greater maximal SPp. These results would indicate that internal resistances and other factors, such as the deformation of the chain and the vibrations of the entire system, may have significant effects on the measurements of work and power outputs. The effects appear to depend on the magnitudes of pedalling force and pedal velocity.

Work in America: Implications for Families. Hearing before the Select Committee on Children, Youth, and Families. House of Representatives, Ninety-Ninth Congress, Second Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Select Committee on Children, Youth, and Families.

This hearing explored the value of work, and how changes in the economy and the composition of the work force have affected families. Witnesses (1) reported data on such topics as the kinds of jobs currently available, women's participation in the work force, unemployment, and labor force growth over the next decade; (2) argued that the economy is…

Mitigated-force carriage for high magnetic field environments

DOEpatents

Ludtka, Gerard M; Ludtka, Gail M; Wilgen, John B; Murphy, Bart L

2014-05-20

A carriage for high magnetic field environments includes a first work-piece holding means for holding a first work-piece, the first work-piece holding means being disposed in an operable relationship with a work-piece processing magnet having a magnetic field strength of at least 1 Tesla. The first work-piece holding means is further disposed in operable connection with a second work-piece holding means for holding a second work-piece so that, as the first work-piece is inserted into the magnetic field, the second work-piece is simultaneously withdrawn from the magnetic field, so that an attractive magnetic force imparted on the first work-piece offsets a resistive magnetic force imparted on the second work-piece.

Effects of a workplace intervention on sleep in employees' children.

PubMed

McHale, Susan M; Lawson, Katie M; Davis, Kelly D; Casper, Lynne; Kelly, Erin L; Buxton, Orfeu

2015-06-01

The implications of sleep patterns for adolescent health are well established, but we know less about larger contextual influences on youth sleep. We focused on parents' workplace experiences as extrafamilial forces that may affect youth sleep. In a group-randomized trial focused on employee work groups in the information technology division of a Fortune 500 company, we tested whether a workplace intervention improved sleep latency, duration, night-to-night variability in duration, and quality of sleep of employees' offspring, aged 9-17 years. The intervention was aimed at promoting employees' schedule control and supervisor support for personal and family life to decrease employees' work-family conflict and thereby promote the health of employees, their families, and the work organization. Analyses focused on 93 parent-adolescent dyads (57 dyads in the intervention and 46 in the comparison group) that completed baseline and 12-month follow-up home interviews and a series of telephone diary interviews that were conducted on eight consecutive evenings at each wave. Intent-to-treat analyses of the diary interview data revealed main effects of the intervention on youth's sleep latency, night-to-night variability in sleep duration, and sleep quality, but not sleep duration. The intervention focused on parents' work conditions, not on their parenting or parent-child relationships, attesting to the role of larger contextual influences on youth sleep and the importance of parents' work experiences in the health of their children. Copyright © 2015 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Effect of Burnishing Parameters on Surface Finish

NASA Astrophysics Data System (ADS)

Shirsat, Uddhav; Ahuja, Basant; Dhuttargaon, Mukund

2017-08-01

Burnishing is cold working process in which hard balls are pressed against the surface, resulting in improved surface finish. The surface gets compressed and then plasticized. This is a highly finishing process which is becoming more popular. Surface quality of the product improves its aesthetic appearance. The product made up of aluminum material is subjected to burnishing process during which kerosene is used as a lubricant. In this study factors affecting burnishing process such as burnishing force, speed, feed, work piece diameter and ball diameter are considered as input parameters while surface finish is considered as an output parameter In this study, experiments are designed using 25 factorial design in order to analyze the relationship between input and output parameters. The ANOVA technique and F-test are used for further analysis.

Using evidence-based practice to create a venous access team: the Venous Access Task Force of the Children's Hospital of Denver.

PubMed

MacPhee, Maura

2002-12-01

The following article is an example of evidence-based practice applied to an institutional Quality Improvement (QI) project. QI originated in the 1980s and is best associated with the work of W. Deming (1986). It is also known as Continuous Quality Improvement, because a major principle of this approach is constant improvement of services or products. This improvement process contains other critical components: scientific method, employee participation and teamwork, accountable leadership, appropriate training and ongoing education, and client focus (Demming, 1986). QI has been globally successful and has helped transform American industry, including health care services. The following clinically based project illustrates the application of QI concepts and evidence-based practice to enhance outcomes. Copyright 2002, Elsevier Science (USA). All rights reserved.

Respiratory Artefact Removal in Forced Oscillation Measurements: A Machine Learning Approach.

PubMed

Pham, Thuy T; Thamrin, Cindy; Robinson, Paul D; McEwan, Alistair L; Leong, Philip H W

2017-08-01

Respiratory artefact removal for the forced oscillation technique can be treated as an anomaly detection problem. Manual removal is currently considered the gold standard, but this approach is laborious and subjective. Most existing automated techniques used simple statistics and/or rejected anomalous data points. Unfortunately, simple statistics are insensitive to numerous artefacts, leading to low reproducibility of results. Furthermore, rejecting anomalous data points causes an imbalance between the inspiratory and expiratory contributions. From a machine learning perspective, such methods are unsupervised and can be considered simple feature extraction. We hypothesize that supervised techniques can be used to find improved features that are more discriminative and more highly correlated with the desired output. Features thus found are then used for anomaly detection by applying quartile thresholding, which rejects complete breaths if one of its features is out of range. The thresholds are determined by both saliency and performance metrics rather than qualitative assumptions as in previous works. Feature ranking indicates that our new landmark features are among the highest scoring candidates regardless of age across saliency criteria. F1-scores, receiver operating characteristic, and variability of the mean resistance metrics show that the proposed scheme outperforms previous simple feature extraction approaches. Our subject-independent detector, 1IQR-SU, demonstrated approval rates of 80.6% for adults and 98% for children, higher than existing methods. Our new features are more relevant. Our removal is objective and comparable to the manual method. This is a critical work to automate forced oscillation technique quality control.

Quality Measures for the Care of Patients with Narcolepsy

PubMed Central

Krahn, Lois E.; Hershner, Shelley; Loeding, Lauren D.; Maski, Kiran P.; Rifkin, Daniel I.; Selim, Bernardo; Watson, Nathaniel F.

2015-01-01

The American Academy of Sleep Medicine (AASM) commissioned a Workgroup to develop quality measures for the care of patients with narcolepsy. Following a comprehensive literature search, 306 publications were found addressing quality care or measures. Strength of association was graded between proposed process measures and desired outcomes. Following the AASM process for quality measure development, we identified three outcomes (including one outcome measure) and seven process measures. The first desired outcome was to reduce excessive daytime sleepiness by employing two process measures: quantifying sleepiness and initiating treatment. The second outcome was to improve the accuracy of diagnosis by employing the two process measures: completing both a comprehensive sleep history and an objective sleep assessment. The third outcome was to reduce adverse events through three steps: ensuring treatment follow-up, documenting medical comorbidities, and documenting safety measures counseling. All narcolepsy measures described in this report were developed by the Narcolepsy Quality Measures Work-group and approved by the AASM Quality Measures Task Force and the AASM Board of Directors. The AASM recommends the use of these measures as part of quality improvement programs that will enhance the ability to improve care for patients with narcolepsy. Citation: Krahn LE, Hershner S, Loeding LD, Maski KP, Rifkin DI, Selim B, Watson NF. Quality measures for the care of patients with narcolepsy. J Clin Sleep Med 2015;11(3):335–355. PMID:25700880

Labor Force

ERIC Educational Resources Information Center

Occupational Outlook Quarterly, 2012

2012-01-01

The labor force is the number of people ages 16 or older who are either working or looking for work. It does not include active-duty military personnel or the institutionalized population, such as prison inmates. Determining the size of the labor force is a way of determining how big the economy can get. The size of the labor force depends on two…

Flextime: A Modified Work Force Scheduling Technique for Selected Headquarters Air Force Logistics Command Organizations.

ERIC Educational Resources Information Center

Kimzey, Reed T.; Prince, Samuel M. O.

The thesis discusses the advantages and disadvantages of one work force scheduling technique--flextime. The authors were interested in determining if a flextime schedule could be put into effect in a governmental organization such as Headquarters Air Force Logistics Command (AFLC). The study objectives were to determine the feasibility,…

Solvent influence upon structure & throughput of poly vinyledene fluoride thin film nano-patterns by imprint lithography

NASA Astrophysics Data System (ADS)

Sankar, M. S. Ravi; Gangineni, R. B.

2018-04-01

This work aims at understanding the solvent influence upon the throughput and structure of poly vinyledene fluoride (PVDF)nano-patterned films. The PVDF thin films are deposited by spin coating method using Dimethylsulfoxide (DMSO), Tetrahydrofuran (THF) and 2-butanone solvents. The nano-patterns are realized by imprinting SONY 700 MB CD aluminum constructions on PVDF thin filmsusing imprint lithography technique under ambient annealing temperature and pressure. Surface morphology &imprint pattern transfer quality is evaluated with Atomic force microscopy (AFM). Raman spectroscopy is used for evaluating the structural evolutions with respect to solvent & patterning.

The effect of geometry and operation conditions on the performance of a gas-liquid cylindrical cyclone separator with new structure

NASA Astrophysics Data System (ADS)

Han, Qing; Zhang, Chi; Xu, Bo; Chen, Jiangping

2013-07-01

The hydrodynamic flow behavior, effects of geometry and working conditions of a gas-liquid cylindrical cyclone separator with a new structure are investigated by computational fluid dynamic and experiment. Gas liquid cylindrical cyclone separator is widely used in oil industry, refrigeration system because of its simple structure, high separating efficiency, little maintenance and no moving parts nor internal devices. In this work, a gas liquid cylindrical cyclone separator with new structure used before evaporator in refrigeration system can remove the vapor from the mixture and make evaporator compact by improving its heat exchange efficiency with the lower inlet quality. It also decreases evaporator pressure drop and reduces compressor work. The two pipes are placed symmetrically which makes each of them can be treated as inlet. It means when the fluids flow reverse, the separator performance will not be influence. Four samples with different geometry parameters are tested by experiment with different inlet quality (0.18-0.33), inlet mass flow rate (65-100kg/h). Compared with the experimental data, CFD simulation results show a good agreement. Eulerian multiphase model and Reynolds Stress Turbulence model are applied in the CFD simulation and obtained the inner flow field such as phase path lines, tangential velocity profiles and pressure and volume of fraction distribution contours. The separator body diameter (24, 36, 48mm) and inlet diameter (3.84, 4.8, 5.76mm) decide the maximum tangential velocity which results in the centrifugal force. The tangential velocity profiles are simulated and compared among different models. The higher tangential velocity makes higher quality of gas outlet but high pressure drop at the same time. Decreasing the inlet diameter increases quality of gas outlet pipe and pressure drop. High gas outlet quality is cost at high pressure drop. Increasing of separator diameter makes gas outlet quality increase first and then decrease but the pressure drop decreases all the way. The offset (0, 2.4, 3.6mm) of gas outlet is an insensitive factor which influences the quality and pressure drop little.

[Working conditions of community nurses].

PubMed

Kułagowska, Ewa; Kosińska, Maria

2010-01-01

To ensure the most efficient workplace health promotion it is essential to identify and monitor health conditions of employees and all components of the work process, as well as to recognize their cause-effect relationships. Community nurses form an occupational group with a specific type of workplace that is usually located in the patient's place of residence and thus not inspected in terms of safety and hygiene. The aim of the study was to identify working conditions of community nurses with special reference to occupational hazards. An anonymous questionnaire was used as a major tool of this survey. It contained 33 questions, concerning the work process, working conditions, work loads and arduousness, hazards and work-related complaints. The questionnaire was completed by 86 community nurses working in the Upper Silesia region. Community nurses generally assessed their work as hard. A more thorough analysis revealed that nursing and curative care, nursing and hygienic care and rehabilitation were regarded by community nurses as hard, whereas social diagnostics and curative diagnostics were assessed as much easier tasks. Excessive physical load, forced position at work, aggressive patients, patients' aggressive family members, dangerous domestic animals, low quality of technical devices in patients' homes were reported as the greatest hazards. The obtained results reveal that working conditions of community nurses do not ensure their safety at work.

Optical Characterization of Lorentz Force Based CMOS-MEMS Magnetic Field Sensor

PubMed Central

Dennis, John Ojur; Ahmad, Farooq; Khir, M. Haris Bin Md; Hamid, Nor Hisham Bin

2015-01-01

Magnetic field sensors are becoming an essential part of everyday life due to the improvements in their sensitivities and resolutions, while at the same time they have become compact, smaller in size and economical. In the work presented herein a Lorentz force based CMOS-MEMS magnetic field sensor is designed, fabricated and optically characterized. The sensor is fabricated by using CMOS thin layers and dry post micromachining is used to release the device structure and finally the sensor chip is packaged in DIP. The sensor consists of a shuttle which is designed to resonate in the lateral direction (first mode of resonance). In the presence of an external magnetic field, the Lorentz force actuates the shuttle in the lateral direction and the amplitude of resonance is measured using an optical method. The differential change in the amplitude of the resonating shuttle shows the strength of the external magnetic field. The resonance frequency of the shuttle is determined to be 8164 Hz experimentally and from the resonance curve, the quality factor and damping ratio are obtained. In an open environment, the quality factor and damping ratio are found to be 51.34 and 0.00973 respectively. The sensitivity of the sensor is determined in static mode to be 0.034 µm/mT when a current of 10 mA passes through the shuttle, while it is found to be higher at resonance with a value of 1.35 µm/mT at 8 mA current. Finally, the resolution of the sensor is found to be 370.37 µT. PMID:26225972

Optical Characterization of Lorentz Force Based CMOS-MEMS Magnetic Field Sensor.

PubMed

Dennis, John Ojur; Ahmad, Farooq; Khir, M Haris Bin Md; Bin Hamid, Nor Hisham

2015-07-27

Magnetic field sensors are becoming an essential part of everyday life due to the improvements in their sensitivities and resolutions, while at the same time they have become compact, smaller in size and economical. In the work presented herein a Lorentz force based CMOS-MEMS magnetic field sensor is designed, fabricated and optically characterized. The sensor is fabricated by using CMOS thin layers and dry post micromachining is used to release the device structure and finally the sensor chip is packaged in DIP. The sensor consists of a shuttle which is designed to resonate in the lateral direction (first mode of resonance). In the presence of an external magnetic field, the Lorentz force actuates the shuttle in the lateral direction and the amplitude of resonance is measured using an optical method. The differential change in the amplitude of the resonating shuttle shows the strength of the external magnetic field. The resonance frequency of the shuttle is determined to be 8164 Hz experimentally and from the resonance curve, the quality factor and damping ratio are obtained. In an open environment, the quality factor and damping ratio are found to be 51.34 and 0.00973 respectively. The sensitivity of the sensor is determined in static mode to be 0.034 µm/mT when a current of 10 mA passes through the shuttle, while it is found to be higher at resonance with a value of 1.35 µm/mT at 8 mA current. Finally, the resolution of the sensor is found to be 370.37 µT.

Deconvoluting the Friction Stir Weld Process for Optimizing Welds

NASA Technical Reports Server (NTRS)

Schneider, Judy; Nunes, Arthur C.

2008-01-01

In the friction stir welding process, the rotating surfaces of the pin and shoulder contact the weld metal and force a rotational flow within the weld metal. Heat, generated by the metal deformation as well as frictional slippage with the contact surface, softens the metal and makes it easier to deform. As in any thermo-mechanical processing of metal, the flow conditions are critical to the quality of the weld. For example, extrusion of metal from under the shoulder of an excessively hot weld may relax local pressure and result in wormhole defects. The trace of the weld joint in the wake of the weld may vary geometrically depending upon the flow streamlines around the tool with some geometry more vulnerable to loss of strength from joint contamination than others. The material flow path around the tool cannot be seen in real time during the weld. By using analytical "tools" based upon the principles of mathematics and physics, a weld model can be created to compute features that can be observed. By comparing the computed observations with actual data, the weld model can be validated or adjusted to get better agreement. Inputs to the model to predict weld structures and properties include: hot working properties ofthe metal, pin tool geometry, travel rate, rotation and plunge force. Since metals record their prior hot working history, the hot working conditions imparted during FSW can be quantified by interpreting the final microstructure. Variations in texture and grain size result from variations in the strain accommodated at a given strain rate and temperature. Microstructural data from a variety of FSWs has been correlated with prior marker studies to contribute to our understanding of the FSW process. Once this stage is reached, the weld modeling process can save significant development costs by reducing costly trial-and-error approaches to obtaining quality welds.

The flexural stiffness and tension state of basalt filter

NASA Astrophysics Data System (ADS)

Khalmuradovich, Sattarov Laziz; Ahmedovich, Kurbanov Abdirahim

2017-03-01

In recent years, there is a growing demand in Uzbekistan for new, cheap and competitive products from local raw materials, the demand being directly connected with the expansion and development opportunities of the mining, metallurgical and processing industries. In such conditions, the need for providing a solution of the problems faced by these industries is a very urgent one and requires further comprehensive studies. One of these tasks includes assessment of the force parameters and bending stiffness of basalt fibre filters, aimed at further improving the efficiency of local basalt raw materials and aiding in the manufacture of new, long-lasting, reliable and high-quality products. In this case, we studied the interaction of basalt fibre filter with a gas or liquid medium, the deformed state of the fibres under the action force of the gas or liquid, and the filter recovery process after removal of the load, all of which occur during mechanical filtration. These tasks are of interest because during the mechanical filtration of a gas or liquid (hereinafter, mechanical filtration) from solids, all attention is paid to the quality of the filtering process. The filtering quality, as known, is determined by the degree of contamination in the liquid undergoing treatment, duration of separation of the pulp into solid and liquid phases during the decantation process of the mixture and the amount of gas/ liquid released into the atmosphere along with carbon monoxide and toxic impurities. At the same time, the state and behaviour of the filtering material remain as minor factors, the consideration of which can play a decisive role in the establishment of filter life and work capacity. Solutions to these problems are very urgent and allow one to create new technologies for the production of basalt filters based on force parameters and bending stiffness, wherein the purification occurs without the intervention of chemicals.

Some views on the manifestation of the death instinct in clinical work.

PubMed

Feldman, M

2000-02-01

The author argues that the postulation of the instinctual drive towards death can be seen as an attempt to account for the manifestation of a destructive psychological force that is palpably present in many of our patients. He discusses some of the experiences, activities and aims that reflect this destructive psychic force, and the conscious and unconscious gratification that is intrinsically bound up with it. What is 'deadly' is the way in which meaning, specificity and differences are attacked, and any developmental processes retarded or undermined. The vitality is taken out of the patient himself as well as his objects, and although in an important sense these drives are 'anti-life', the author suggests that their aim is not literally to kill or to annihilate, but that the patient feels compelled to maintain a link with the object that often has an evidently tormenting quality. Using a detailed clinical illustration, the author argues that the gratification that is bound up in these activities, and which gives them such a compulsive quality, does not result from fusion with the life instinct, with the resultant libidinisation of the death instinct. On the contrary, the gratification obtained from attacking, spoiling and undermining, whether directed to the self or the object, is an essential element of such a destructive drive.

Re-evaluation of the reported experimental values of the heat of vaporization of N-methylacetamide

PubMed Central

MacKerell, Alexander D.; Shim, Ji Hyun; Anisimov, Victor M.

2010-01-01

The accuracy of empirical force fields is inherently related to the quality of the target data used for optimization of the model. With the heat of vaporization (ΔHvap) of N-methylacetamide (NMA), a range of values have been reported as target data for optimization of the nonbond parameters associated with the peptide bond in proteins. In the present work, the original experimental data and Antoine constants used for the determination of the ΔHvap of NMA are reanalyzed. Based on this analysis, the wide range of ΔHvap values reported in the literature are shown to be due to incorrect reporting of the temperatures at which the original values were extracted and limitations in the quality of experimental vapor pressure-temperature data over a wide range of temperatures. Taking these problems into account, a consistent ΔHvap value is extracted from three studies for which experimental data are available. This analysis suggests that the most reliable value for ΔHvap is 13.0±0.1 at 410 K for use in force field optimization studies. The present results also indicate that similar analyses, including analysis of Antoine constants alone, may be of utility when reported ΔHvap values are not consistent for a given neat liquid. PMID:20445813

Using stamping punch force variation for the identification of changes in lubrication and wear mechanism

NASA Astrophysics Data System (ADS)

Voss, B. M.; Pereira, M. P.; Rolfe, B. F.; Doolan, M. C.

2017-09-01

The growth in use of Advanced High Strength Steels in the automotive industry for light-weighting and safety has increased the rates of tool wear in sheet metal stamping. This is an issue that adds significant costs to production in terms of manual inspection and part refinishing. To reduce these costs, a tool condition monitoring system is required and a firm understanding of process signal variation must form the foundation for any such monitoring system. Punch force is a stamping process signal that is widely collected by industrial presses and has been linked closely to part quality and tool condition, making it an ideal candidate as a tool condition monitoring signal. In this preliminary investigation, the variation of punch force due to different lubrication conditions and progressive wear are examined. Linking specific punch force signature changes to developing lubrication and wear events is valuable for die wear and stamping condition monitoring. A series of semi-industrial channel forming trials were conducted under different lubrication regimes and progressive die wear. Punch force signatures were captured for each part and Principal Component Analysis (PCA) was applied to determine the key Principal Components of the signature data sets. These Principal Components were linked to the evolution of friction conditions over the course of the stroke for the different lubrication regimes and mechanism of galling wear. As a result, variation in punch force signatures were correlated to the current mechanism of wear dominant on the formed part; either abrasion or adhesion, and to changes in lubrication mechanism. The outcomes of this study provide important insights into punch force signature variation, that will provide a foundation for future work into the development of die wear and lubrication monitoring systems for sheet metal stamping.

High-speed adaptive contact-mode atomic force microscopy imaging with near-minimum-force

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ren, Juan; Zou, Qingze, E-mail: qzzou@rci.rutgers.edu

In this paper, an adaptive contact-mode imaging approach is proposed to replace the traditional contact-mode imaging by addressing the major concerns in both the speed and the force exerted to the sample. The speed of the traditional contact-mode imaging is largely limited by the need to maintain precision tracking of the sample topography over the entire imaged sample surface, while large image distortion and excessive probe-sample interaction force occur during high-speed imaging. In this work, first, the image distortion caused by the topography tracking error is accounted for in the topography quantification. Second, the quantified sample topography is utilized inmore » a gradient-based optimization method to adjust the cantilever deflection set-point for each scanline closely around the minimal level needed for maintaining stable probe-sample contact, and a data-driven iterative feedforward control that utilizes a prediction of the next-line topography is integrated to the topography feeedback loop to enhance the sample topography tracking. The proposed approach is demonstrated and evaluated through imaging a calibration sample of square pitches at both high speeds (e.g., scan rate of 75 Hz and 130 Hz) and large sizes (e.g., scan size of 30 μm and 80 μm). The experimental results show that compared to the traditional constant-force contact-mode imaging, the imaging speed can be increased by over 30 folds (with the scanning speed at 13 mm/s), and the probe-sample interaction force can be reduced by more than 15% while maintaining the same image quality.« less

High-speed adaptive contact-mode atomic force microscopy imaging with near-minimum-force.

PubMed

Ren, Juan; Zou, Qingze

2014-07-01

In this paper, an adaptive contact-mode imaging approach is proposed to replace the traditional contact-mode imaging by addressing the major concerns in both the speed and the force exerted to the sample. The speed of the traditional contact-mode imaging is largely limited by the need to maintain precision tracking of the sample topography over the entire imaged sample surface, while large image distortion and excessive probe-sample interaction force occur during high-speed imaging. In this work, first, the image distortion caused by the topography tracking error is accounted for in the topography quantification. Second, the quantified sample topography is utilized in a gradient-based optimization method to adjust the cantilever deflection set-point for each scanline closely around the minimal level needed for maintaining stable probe-sample contact, and a data-driven iterative feedforward control that utilizes a prediction of the next-line topography is integrated to the topography feeedback loop to enhance the sample topography tracking. The proposed approach is demonstrated and evaluated through imaging a calibration sample of square pitches at both high speeds (e.g., scan rate of 75 Hz and 130 Hz) and large sizes (e.g., scan size of 30 μm and 80 μm). The experimental results show that compared to the traditional constant-force contact-mode imaging, the imaging speed can be increased by over 30 folds (with the scanning speed at 13 mm/s), and the probe-sample interaction force can be reduced by more than 15% while maintaining the same image quality.

Women of Hispanic Origin in the Labor Force. Facts on Working Women No. 89-1 = La mujer de origen hispano en la fuerza laboral. Facts on Working Women Num. 89-1S.

ERIC Educational Resources Information Center

Women's Bureau (DOL), Washington, DC.

Data on Hispanic women in the labor force between 1978 and 1988 show the following: (1) 6.5 percent of the women in the work force in 1988 were of Hispanic origin (3.6 million); (2) the median age of Hispanic women was 26.1 years, 2-5 years younger than Black or White women; (3) 66 percent of Hispanic women participate in the labor force, a higher…

The Prediction of the Work of Friction Force on the Arbitrary Path

ERIC Educational Resources Information Center

Matehkolaee, Mehdi Jafari; Majidian, Kourosh

2013-01-01

In this paper we have calculated the work of friction force on the arbitrary path. In our method didn't use from energy conservative conceptions any way. The distinction of this procedure is that at least do decrease measurement on the path once. Thus we can forecast the amount of work of friction force without information about speed of…

Interaction of lifestyle and work ability index in blue collar workers.

PubMed

Mohammadi, Saber; Ghaffari, Mostafa; Abdi, Alireza; Bahadori, Baharak; Mirzamohammadi, Elham; Attarchi, Mirsaeed

2014-11-17

Early labor force exit is one of the major problems worldwide. The present study investigates the relationship between work ability and lifestyle. This study was conducted at a manufacturing plant in Tehran in 2012. All 851 male workers in this plant were included into the study and their work ability was assessed using the Work Ability Index (WAI). Based on the obtained scores, the participants were then classified into four work ability groups (poor, moderate, good, or excellent). Moreover, the participants' lifestyles were studied in three areas, including physical activity, cigarette smoking, and Body Mass Index (BMI). The average work ability index score was 42.07, ranging from 7-48. Among the participants, 6.4% (43), 6.5% (44), 38.3% (259), and 48.8% (330) were in the groups with poor, moderate, good, and excellent work ability, respectively. The results of logistic regression analysis showed that there is a significant relationship between work ability and lifestyle (cigarette smoking, BMI, and physical activity) even after adjustment for confounding variables (P<0.05). According to the results of the present study, there might be a relationship between work ability and lifestyle (physical activity, BMI, cigarette smoking). Therefore, it is recommended to implement a lifestyle quality enhancement program to improve work ability in working environments.

Canine Supply for Physical Security: An Analysis of the Royal Australian Air Force Military Working Dog Program

DTIC Science & Technology

2016-03-01

PHYSICAL SECURITY: AN ANALYSIS OF THE ROYAL AUSTRALIAN AIR FORCE MILITARY WORKING DOG PROGRAM by Mark W. Powell March 2016 Thesis...AN ANALYSIS OF THE ROYAL AUSTRALIAN AIR FORCE MILITARY WORKING DOG PROGRAM 5. FUNDING NUMBERS 6. AUTHOR(S) Mark W. Powell 7. PERFORMING...increased demand on its physical security elements. Its military working dog (MWD) workforce is required to meet an inventory of 204 by end of year 2023 as

Environmental management strategy: four forces analysis.

PubMed

Doyle, Martin W; Von Windheim, Jesko

2015-01-01

We develop an analytical approach for more systematically analyzing environmental management problems in order to develop strategic plans. This approach can be deployed by agencies, non-profit organizations, corporations, or other organizations and institutions tasked with improving environmental quality. The analysis relies on assessing the underlying natural processes followed by articulation of the relevant societal forces causing environmental change: (1) science and technology, (2) governance, (3) markets and the economy, and (4) public behavior. The four forces analysis is then used to strategize which types of actions might be most effective at influencing environmental quality. Such strategy has been under-used and under-valued in environmental management outside of the corporate sector, and we suggest that this four forces analysis is a useful analytic to begin developing such strategy.

Environmental Management Strategy: Four Forces Analysis

NASA Astrophysics Data System (ADS)

Doyle, Martin W.; Von Windheim, Jesko

2015-01-01

We develop an analytical approach for more systematically analyzing environmental management problems in order to develop strategic plans. This approach can be deployed by agencies, non-profit organizations, corporations, or other organizations and institutions tasked with improving environmental quality. The analysis relies on assessing the underlying natural processes followed by articulation of the relevant societal forces causing environmental change: (1) science and technology, (2) governance, (3) markets and the economy, and (4) public behavior. The four forces analysis is then used to strategize which types of actions might be most effective at influencing environmental quality. Such strategy has been under-used and under-valued in environmental management outside of the corporate sector, and we suggest that this four forces analysis is a useful analytic to begin developing such strategy.

Acute pulmonary function change associated with work on large dairies in California.

PubMed

Eastman, Chelsea; Schenker, Marc B; Mitchell, Diane C; Tancredi, Daniel J; Bennett, Deborah H; Mitloehner, Frank M

2013-01-01

To study whether dairy workers in California have lower baseline and greater cross-shift decrements in lung function than control employees. A cross-sectional study of 210 dairy and 47 control workers who completed questionnaires and spirometry before and after the work shift. Dairy work was associated with mean baseline differences of -0.132 L (P = 0.07) and -0.131 L (P = 0.13) in forced expiratory volume in 1 second and forced vital capacity, respectively, compared with control employees, adjusting for age, height, smoking status, and days back at work since last day off. Dairy work was associated with a mean cross-shift difference of -65.2 mL (P = 0.02) and -103.1 mL (P < 0.01) in forced expiratory volume in 1 second and forced vital capacity, respectively, adjusting for smoking status and work-shift time. Dairy work in California was associated with mild acute airway obstruction. The unclear long-term effect of dairy work in California merits further investigation.

Handling Quality Requirements for Advanced Aircraft Design: Longitudinal Mode

DTIC Science & Technology

1979-08-01

phases of air -to- air combat, for example). This is far simpler than the general problem of control law definition. How- ever, the results of such...unlimited. Ali FORCE FUGHT DYNAMICS LABORATORYAIR FORCE WRIGHT AERONAUTICALLABORATORIES AIR FORCE SYSTEMS COMMANDI * WRIGHT-PATITERSON AIR FORCE BASE...not necessarily shared by the Air Force. Brian. W. VauVliet Project Engineer S Rorad0. Anderson, Chief Control Dynamics Branch Flight Control Division

Controlling under-actuated robot arms using a high speed dynamics process

NASA Technical Reports Server (NTRS)

Jain, Abhinandan (Inventor); Rodriguez, Guillermo (Inventor)

1994-01-01

The invention controls an under-actuated manipulator by first obtaining predetermined active joint accelerations of the active joints and the passive joint friction forces of the passive joints, then computing articulated body qualities for each of the joints from the current positions of the links, and finally computing from the articulated body qualities and from the active joint accelerations and the passive joint forces, active joint forces of the active joints. Ultimately, the invention transmits servo commands to the active joint forces thus computed to the respective ones of the joint servos. The computation of the active joint forces is accomplished using a recursive dynamics algorithm. In this computation, an inward recursion is first carried out for each link, beginning with the outermost link in order to compute the residual link force of each link from the active joint acceleration if the corresponding joint is active, or from the known passive joint force if the corresponding joint is passive. Then, an outward recursion is carried out for each link in which the active joint force is computed from the residual link force if the corresponding joint is active or the passive joint acceleration is computed from the residual link force if the corresponding joint is passive.

Partnership for the Revitalization of National Wind Tunnel Force Measurement Capability

NASA Technical Reports Server (NTRS)

Rhew, Ray D.; Skelley, Marcus L.; Woike, Mark R.; Bader, Jon B.; Marshall, Timothy J.

2009-01-01

Lack of funding and lack of focus on research over the past several years, coupled with force measurement capabilities being decentralized and distributed across the National Aeronautics and Space Administration (NASA) research centers, has resulted in a significant erosion of (1) capability and infrastructure to produce and calibrate force measurement systems; (2) NASA s working knowledge of those systems; and (3) the quantity of high-quality, full-capability force measurement systems available for use in aeronautics testing. Simultaneously, and at proportional rates, the capability of industry to design, manufacture, and calibrate these test instruments has been eroding primarily because of a lack of investment by the aeronautics community. Technical expertise in this technology area is a core competency in aeronautics testing; it is highly specialized and experience-based, and it represents a niche market for only a few small precision instrument shops in the United States. With this backdrop, NASA s Aeronautics Test Program (ATP) chartered a team to examine the issues and risks associated with the problem, focusing specifically on strain- gage balances. The team partnered with the U.S. Air Force s Arnold Engineering Development Center (AEDC) to exploit their combined capabilities and take a national level government view of the problem. This paper describes the team s approach, its findings, and its recommendations, and the current status for revitalizing the government s balance capability with respect to designing, fabricating, calibrating, and using the instruments.

Professionalism and professional quality of life for oncology nurses.

PubMed

Jang, Insil; Kim, Yuna; Kim, Kyunghee

2016-10-01

To identify the relationship between professionalism and professional quality of life among oncology nurses working at tertiary hospitals in Korea. Oncology nurses are combined with core competencies and qualities required in cancer patient care. Professionalism that means compassion satisfaction and compassion fatigue is a main concept in problem-solving strategies as motivation. Their satisfaction is representative of professionalism and professional quality of life. However, little research has focused on professionalism and professional quality of life. A cross-sectional study with self-administered questionnaires. A total of 285 nurses from two tertiary hospitals were included. Data collection was undertaken using Korean version of professionalism scale derived from the Hall Professional Inventory Scale and professional quality of life. Data were analysed by spss 21.0 for Windows Program using t-test, anova, and multiple regression. The mean score of professionalism in oncology nurses was 77·98 ± 7·31. The mean professional quality of life score for compassion satisfaction, compassion fatigue and secondary traumatic stress was 33·84 ± 5·62, 28·38 ± 5·36 and 28·33 ± 5·48. Compassion satisfaction was affected by factors of professionalism with an explanatory power of 49·2%. Burnout and secondary traumatic stress were affected by factors of professionalism with an explanatory power of 39·3% and 4·8%. The higher the professionalism leads to the higher the compassion satisfaction, the lower the compassion fatigue. The relationship between professionalism and professional quality of life for a health work environment requires further investigation. Our study supports the idea that enhancing professionalism can increase professional quality of life. It is necessary to develop professionalism by recognised qualifications and applied rewards in advanced nursing organisational culture. Furthermore, compassion satisfaction is increased by continuing ethical and moral education programme for clinical nurses to force professional dedication and encouraging nurses to affiliate themselves with the professional communities. Nurses are connected to professionalism affect the quality of nursing service for patients and professional quality of life for themselves. © 2016 John Wiley & Sons Ltd.

A task force model for statewide change in nursing education: building quality and safety.

PubMed

Mundt, Mary H; Clark, Margherita Procaccini; Klemczak, Jeanette Wrona

2013-01-01

The purpose of this article was to describe a statewide planning process to transform nursing education in Michigan to improve quality and safety of patient care. A task force model was used to engage diverse partners in issue identification, consensus building, and recommendations. An example of a statewide intervention in nursing education and practice that was executed was the Michigan Quality and Safety in Nursing Education Institute, which was held using an integrated approach to academic-practice partners from all state regions. This paper describes the unique advantage of leadership by the Michigan Chief Nurse Executive, the existence of a nursing strategic plan, and a funding model. An overview of the Task Force on Nursing Education is presented with a focus on the model's 10 process steps and resulting seven recommendations. The Michigan Nurse Education Council was established to implement the recommendations that included quality and safety. Copyright © 2013 Elsevier Inc. All rights reserved.

The choices, choosing model of quality of life: description and rationale.

PubMed

Gurland, Barry J; Gurland, Roni V

2009-01-01

This introductory paper offers a critical review of current models and measures of quality of life, and describes a choices and choosing (c-c) process as a new model of quality of life. Criteria are proposed for judging the relative merits of models of quality of life with preference being given to explicit mechanisms, linkages to a science base, a means of identifying deficits amenable to rational restorative interventions, and with embedded values of the whole person. A conjectured model, based on the processes of gaining access to choices and choosing among them, matches the proposed criteria. The c-c process is an evolved adaptive mechanism dedicated to the pursuit of quality of life, driven by specific biological and psychological systems, and influenced by social and environmental forces. This model strengthens the science base for the field of quality of life, unifies approaches to concept and measurement, and guides the evaluation of impairments of quality of life. Corresponding interventions can be aimed at relieving restrictions or distortions of the c-c process; thus helping people to preserve and improve their quality of life. RELATED WORK: Companion papers detail relevant aspects of the science base, present methods of identifying deficits and distortions of the c-c model so as to open opportunities for rational restorative interventions, and explore empirical analyses of the relationship between health imposed restrictions of c-c and conventional indicators of diminished quality of life. [corrected] (c) 2008 John Wiley & Sons, Ltd.

Receiving treatment, labor force activity, and work performance among people with psychiatric disorders: results from a population survey.

PubMed

Waghorn, Geoffrey; Chant, David

2011-12-01

Standard treatments for psychiatric disorders such as schizophrenia, depression and anxiety disorders are generally expected to benefit individuals, employers, and the wider community through improvements in work-functioning and productivity. We repeated a previous secondary investigation of receiving treatment, labor force activity and self-reported work performance among people with ICD-10 psychiatric disorders, in comparison to people with other types of health conditions. Data were collected by the Australian Bureau of Statistics in 2003 repeating a survey administered in 1998 using representative multistage sampling strategies. The 2003 household probability sample consisted of 36,241 working age individuals. Consistent with the previous secondary investigation based on the 1998 survey administration, receiving treatment was consistently associated with non-participation in the labor force, and was negatively associated with work performance. At a population level, receiving treatment was negatively associated with labor force activity and work performance. The stability of these results in two independent surveys highlights the need to investigate the longitudinal relationships between evidence-based treatments for psychiatric conditions as applied in real-world settings, and labor force participation and work performance outcomes.

The Alexandria library, a quantum-chemical database of molecular properties for force field development.

PubMed

Ghahremanpour, Mohammad M; van Maaren, Paul J; van der Spoel, David

2018-04-10

Data quality as well as library size are crucial issues for force field development. In order to predict molecular properties in a large chemical space, the foundation to build force fields on needs to encompass a large variety of chemical compounds. The tabulated molecular physicochemical properties also need to be accurate. Due to the limited transparency in data used for development of existing force fields it is hard to establish data quality and reusability is low. This paper presents the Alexandria library as an open and freely accessible database of optimized molecular geometries, frequencies, electrostatic moments up to the hexadecupole, electrostatic potential, polarizabilities, and thermochemistry, obtained from quantum chemistry calculations for 2704 compounds. Values are tabulated and where available compared to experimental data. This library can assist systematic development and training of empirical force fields for a broad range of molecules.

The Alexandria library, a quantum-chemical database of molecular properties for force field development

NASA Astrophysics Data System (ADS)

Ghahremanpour, Mohammad M.; van Maaren, Paul J.; van der Spoel, David

2018-04-01

Data quality as well as library size are crucial issues for force field development. In order to predict molecular properties in a large chemical space, the foundation to build force fields on needs to encompass a large variety of chemical compounds. The tabulated molecular physicochemical properties also need to be accurate. Due to the limited transparency in data used for development of existing force fields it is hard to establish data quality and reusability is low. This paper presents the Alexandria library as an open and freely accessible database of optimized molecular geometries, frequencies, electrostatic moments up to the hexadecupole, electrostatic potential, polarizabilities, and thermochemistry, obtained from quantum chemistry calculations for 2704 compounds. Values are tabulated and where available compared to experimental data. This library can assist systematic development and training of empirical force fields for a broad range of molecules.

Measurement and analysis of thrust force in drilling sisal-glass fiber reinforced polymer composites

NASA Astrophysics Data System (ADS)

Ramesh, M.; Gopinath, A.

2017-05-01

Drilling of composite materials is difficult when compared to the conventional materials because of its in-homogeneous nature. The force developed during drilling play a major role in the surface quality of the hole and minimizing the damages around the surface. This paper focuses the effect of drilling parameters on thrust force in drilling of sisal-glass fiber reinforced polymer composite laminates. The quadratic response models are developed by using response surface methodology (RSM) to predict the influence of cutting parameters on thrust force. The adequacy of the models is checked by using the analysis of variance (ANOVA). A scanning electron microscope (SEM) analysis is carried out to analyze the quality of the drilled surface. From the results, it is found that, the feed rate is the most influencing parameter followed by spindle speed and the drill diameter is the least influencing parameter on the thrust force.

Force and work to shear green southern pine logs at slow speed

Treesearch

Peter Koch

1971-01-01

When logs of three diameter classes and two specific gravity classes were sheared with a 3/8-inch-thick knife travelling at 2 inches per minute, shearing force and work averaged greatest for dense 13.6-inch logs cut with a knife having a 45o sharpness angle (73,517 pounds; 49,838 foot-pounds). Force and work averaged at least 5.1-inch bolts of...

MO-D-213-06: Quantitative Image Quality Metrics Are for Physicists, Not Radiologists: How to Communicate to Your Radiologists Using Their Language

DOE Office of Scientific and Technical Information (OSTI.GOV)

Szczykutowicz, T; Rubert, N; Ranallo, F

Purpose: A framework for explaining differences in image quality to non-technical audiences in medial imaging is needed. Currently, this task is something that is learned “on the job.” The lack of a formal methodology for communicating optimal acquisition parameters into the clinic effectively mitigates many technological advances. As a community, medical physicists need to be held responsible for not only advancing image science, but also for ensuring its proper use in the clinic. This work outlines a framework that bridges the gap between the results from quantitative image quality metrics like detectability, MTF, and NPS and their effect on specificmore » anatomical structures present in diagnostic imaging tasks. Methods: Specific structures of clinical importance were identified for a body, an extremity, a chest, and a temporal bone protocol. Using these structures, quantitative metrics were used to identify the parameter space that should yield optimal image quality constrained within the confines of clinical logistics and dose considerations. The reading room workflow for presenting the proposed changes for imaging each of these structures is presented. The workflow consists of displaying images for physician review consisting of different combinations of acquisition parameters guided by quantitative metrics. Examples of using detectability index, MTF, NPS, noise and noise non-uniformity are provided. During review, the physician was forced to judge the image quality solely on those features they need for diagnosis, not on the overall “look” of the image. Results: We found that in many cases, use of this framework settled mis-agreements between physicians. Once forced to judge images on the ability to detect specific structures inter reader agreement was obtained. Conclusion: This framework will provide consulting, research/industrial, or in-house physicists with clinically relevant imaging tasks to guide reading room image review. This framework avoids use of the overall “look” or “feel” to dictate acquisition parameter selection. Equipment grants GE Healthcare.« less

On-Line Ion Exchange Liquid Chromatography as a Process Analytical Technology for Monoclonal Antibody Characterization in Continuous Bioprocessing.

PubMed

Patel, Bhumit A; Pinto, Nuno D S; Gospodarek, Adrian; Kilgore, Bruce; Goswami, Kudrat; Napoli, William N; Desai, Jayesh; Heo, Jun H; Panzera, Dominick; Pollard, David; Richardson, Daisy; Brower, Mark; Richardson, Douglas D

2017-11-07

Combining process analytical technology (PAT) with continuous production provides a powerful tool to observe and control monoclonal antibody (mAb) fermentation and purification processes. This work demonstrates on-line liquid chromatography (on-line LC) as a PAT tool for monitoring a continuous biologics process and forced degradation studies. Specifically, this work focused on ion exchange chromatography (IEX), which is a critical separation technique to detect charge variants. Product-related impurities, including charge variants, that impact function are classified as critical quality attributes (CQAs). First, we confirmed no significant differences were observed in the charge heterogeneity profile of a mAb through both at-line and on-line sampling and that the on-line method has the ability to rapidly detect changes in protein quality over time. The robustness and versatility of the PAT methods were tested by sampling from two purification locations in a continuous mAb process. The PAT IEX methods used with on-line LC were a weak cation exchange (WCX) separation and a newly developed shorter strong cation exchange (SCX) assay. Both methods provided similar results with the distribution of percent acidic, main, and basic species remaining unchanged over a 2 week period. Second, a forced degradation study showed an increase in acidic species and a decrease in basic species when sampled on-line over 7 days. These applications further strengthen the use of on-line LC to monitor CQAs of a mAb continuously with various PAT IEX analytical methods. Implementation of on-line IEX will enable faster decision making during process development and could potentially be applied to control in biomanufacturing.

Deformation of biological cells in the acoustic field of an oscillating bubble.

PubMed

Zinin, Pavel V; Allen, John S

2009-02-01

In this work we develop a theoretical framework of the interaction of microbubbles with bacteria in the ultrasound field using a shell model of the bacteria, following an approach developed previously [P. V. Zinin, Phys. Rev. E 72, 61907 (2005)]. Within the shell model, the motion of the cell in an ultrasonic field is determined by the motion of three components: the internal viscous fluid, a thin elastic shell, and the surrounding viscous fluid. Several conclusions can be drawn from the modeling of sound interaction with a biological cell: (a) the characteristics of a cell's oscillations in an ultrasonic field are determined both by the elastic properties of the shell the viscosities of all components of the system, (b) for dipole quadrupole oscillations the cell's shell deforms due to a change in the shell area this oscillation depends on the surface area modulus K{A} , (c) the relative change in the area has a maximum at frequency f{K} approximately 1/2pi square root[K{A}(rhoa;{3})] , where a is the cell's radius and rho is its density. It was predicted that deformation of the cell wall at the frequency f{K} is high enough to rupture small bacteria such as E . coli in which the quality factor of natural vibrations is less than 1 (Q<1). For bacteria with high value quality factors (Q>1) , the area deformation has a strong peak near a resonance frequency f{K} however, the value of the deformation near the resonance frequency is not high enough to produce sufficient mechanical effect. The theoretical framework developed in this work can be extended for describing the deformation of a biological cell under any arbitrary, external periodic force including radiation forces unduced by acoustical (acoustical levitation) or optical waves (optical tweezers).

Deformation of biological cells in the acoustic field of an oscillating bubble

PubMed Central

Zinin, Pavel V.; Allen, John S.

2009-01-01

In this work we develop a theoretical framework of the interaction of microbubbles with bacteria in the ultrasound field using a shell model of the bacteria, following an approach developed previously [P. V. Zinin et al., Phys. Rev. E 72, 61907 (2005)]. Within the shell model, the motion of the cell in an ultrasonic field is determined by the motion of three components: the internal viscous fluid, a thin elastic shell, and the surrounding viscous fluid. Several conclusions can be drawn from the modeling of sound interaction with a biological cell: (a) the characteristics of a cell’s oscillations in an ultrasonic field are determined both by the elastic properties of the shell the viscosities of all components of the system, (b) for dipole quadrupole oscillations the cell’s shell deforms due to a change in the shell area this oscillation depends on the surface area modulus KA, (c) the relative change in the area has a maximum at frequency fK∼12πKA/(ρa3), where a is the cell’s radius and ρ is its density. It was predicted that deformation of the cell wall at the frequency fK is high enough to rupture small bacteria such as E. coli in which the quality factor of natural vibrations is less than 1 (Q < 1). For bacteria with high value quality factors (Q > 1), the area deformation has a strong peak near a resonance frequency fK; however, the value of the deformation near the resonance frequency is not high enough to produce sufficient mechanical effect. The theoretical framework developed in this work can be extended for describing the deformation of a biological cell under any arbitrary, external periodic force including radiation forces unduced by acoustical (acoustical levitation) or optical waves (optical tweezers). PMID:19391781

Deformation of biological cells in the acoustic field of an oscillating bubble

NASA Astrophysics Data System (ADS)

Zinin, Pavel V.; Allen, John S., III

2009-02-01

In this work we develop a theoretical framework of the interaction of microbubbles with bacteria in the ultrasound field using a shell model of the bacteria, following an approach developed previously [P. V. Zinin , Phys. Rev. E 72, 61907 (2005)]. Within the shell model, the motion of the cell in an ultrasonic field is determined by the motion of three components: the internal viscous fluid, a thin elastic shell, and the surrounding viscous fluid. Several conclusions can be drawn from the modeling of sound interaction with a biological cell: (a) the characteristics of a cell’s oscillations in an ultrasonic field are determined both by the elastic properties of the shell the viscosities of all components of the system, (b) for dipole quadrupole oscillations the cell’s shell deforms due to a change in the shell area this oscillation depends on the surface area modulus KA , (c) the relative change in the area has a maximum at frequency fK˜(1)/(2π)KA/(ρa3) , where a is the cell’s radius and ρ is its density. It was predicted that deformation of the cell wall at the frequency fK is high enough to rupture small bacteria such as E . coli in which the quality factor of natural vibrations is less than 1 (Q<1) . For bacteria with high value quality factors (Q>1) , the area deformation has a strong peak near a resonance frequency fK ; however, the value of the deformation near the resonance frequency is not high enough to produce sufficient mechanical effect. The theoretical framework developed in this work can be extended for describing the deformation of a biological cell under any arbitrary, external periodic force including radiation forces unduced by acoustical (acoustical levitation) or optical waves (optical tweezers).

Seven Important Labor Force Trends.

ERIC Educational Resources Information Center

Bailey, John A.

1982-01-01

Presents statistics on the changing human resources mix in the labor force, which vocational counselors should be aware of. Trends include higher percentages of women working, and older men and married men leaving the work force. One result is an increasing number of persons are able to retire earlier. (JAC)

The quality-value proposition in health care.

PubMed

Feazell, G Landon; Marren, John P

2003-01-01

Powerful forces are converging in US health care to finally cause recognition of the inherently logical relationship between quality and money. The forces, or marketplace "drivers," which are converging to compel recognition of the relationship between cost and quality are: (1) the increasing costs of care; (2) the recurrence of another medical malpractice crisis; and (3) the recognition inside and outside of health care that quality is inconsistent and unacceptable. It is apparent that hospital administrators, financial officers, board members, and medical staff leadership do not routinely do two things: (1) relate quality to finance; and (2) appreciate the intra-hospital structural problems that impede quality attainment. This article discusses these factors and offers a positive method for re-structuring quality efforts and focusing the hospital and its medical staff on quality. The simple but compelling thesis of the authors is that health care must immediately engage in the transformation to making quality of medical care the fundamental business strategy of the organization.

Psychophysical testing of visual prosthetic devices: a call to establish a multi-national joint task force

NASA Astrophysics Data System (ADS)

Rizzo, Joseph F., III; Ayton, Lauren N.

2014-04-01

Recent advances in the field of visual prostheses, as showcased in this special feature of Journal of Neural Engineering , have led to promising results from clinical trials of a number of devices. However, as noted by these groups there are many challenges involved in assessing vision of people with profound vision loss. As such, it is important that there is consistency in the methodology and reporting standards for clinical trials of visual prostheses and, indeed, the broader vision restoration research field. Two visual prosthesis research groups, the Boston Retinal Implant Project (BRIP) and Bionic Vision Australia (BVA), have agreed to work cooperatively to establish a multi-national Joint Task Force. The aim of this Task Force will be to develop a consensus statement to guide the methods used to conduct and report psychophysical and clinical results of humans who receive visual prosthetic devices. The overarching goal is to ensure maximum benefit to the implant recipients, not only in the outcomes of the visual prosthesis itself, but also in enabling them to obtain accurate information about this research with ease. The aspiration to develop a Joint Task Force was first promulgated at the inaugural 'The Eye and the Chip' meeting in September 2000. This meeting was established to promote the development of the visual prosthetic field by applying the principles of inclusiveness, openness, and collegiality among the growing body of researchers in this field. These same principles underlie the intent of this Joint Task Force to enhance the quality of psychophysical research within our community. Despite prior efforts, a critical mass of interested parties could not congeal. Renewed interest for developing joint guidelines has developed recently because of a growing awareness of the challenges of obtaining reliable measurements of visual function in patients who are severely visually impaired (in whom testing is inherently noisy), and of the importance of comparing outcomes amongst the many research teams that have entered this field, all of which are using different devices implanted at various locations within the visual system and different methods of assessing efficacy. Researchers at the BRIP and BVA believe that use of common methods for testing and for reporting results would benefit all scientists and clinicians in the field, the agencies that regulate human testing, corporations that are invested in the success of this field, and, most importantly, potential patients. The Task Force will be formed with the intent of developing substantive recommendations to provide a measure of consistency and quality control within the field. The guidelines will offer recommendations for the assessment of the: (1) baseline (pre-implant) visual status of potential patients (including specification of the disease diagnosis and impact on visual functioning) and (2) post-operative visual function. The guidelines will be available to the public, research groups and companies. Any groups that choose to adopt the recommendations would be encouraged to include a formal statement of compliance in their presentations and publications. The Task Force will develop these guidelines with the understanding that the ability to perform experiments in the suggested manner might be limited by the particular engineering design and functionality of different prosthesis devices. It is not the intent of the Task Force to write strict test protocols for all parties to follow, but instead to work cooperatively as a research field to develop guidelines about the types of tests that should be implemented, and how they could be reported in a similar format between groups. The opportunity to participate on the Task Force is open to all researchers, clinicians and other specialists who work in the fields of sensory prostheses (both visual and cochlear implants), molecular therapy, stem cells, optogenetics or other fields that share a similar goal of restoring vision to the blind. Decisions about the guidelines will be made democratically, with precautions to prevent any one group or company from having a more dominant voice than any other. One or more smaller working groups may be established to delve more deeply into specific issues, like the ethics of testing or governance structure, and to develop specific wording for recommendations that would be voted on by the entire Task Force group. Ultimately, the various recommendations, once approved democratically, will serve as the consensus document for the Multi-National Joint Task Force. The full list of members of the Task Force and the rules of governance will be published to promote transparency. The Joint Task force will post its guidelines with all signatories on a dedicated page within the website of the Henry Ford Department of Ophthalmology (Detroit). This site was chosen in recognition of the consistent support that Phillip Hessburg MD and the Board of Directors of the Detroit Institute of Ophthalmology, which has recently merged with the Henry Ford Department of Ophthalmology, have so generously and selflessly provided to our field over the past 14 years. This website will also contain a list of all human psychophysical testing that has been performed in the visual prosthetic field, with designations for those studies that were performed in accordance with the guidelines of the Multi-National Task Force, which will assume responsibility for the accuracy of the material. For those who wish to join this Task Force or have further questions, Dr Rizzo and Dr Ayton can be contacted at the email addresses listed above. The founding members of the Task Force anticipate that this digital resource will prove valuable to anyone who has interest in learning more about the achievements in our field, especially our prospective patients, to whom we dedicate our work.

What is the prevalence of and associations with forced labour experiences among male migrants from Dolakha, Nepal? Findings from a cross-sectional study of returnee migrants

PubMed Central

Mak, Joelle; Abramsky, Tanya; Sijapati, Bandita; Kiss, Ligia; Zimmerman, Cathy

2017-01-01

Objectives Growing numbers of people are migrating outside their country for work, and many experience precarious conditions, which have been linked to poor physical and mental health. While international dialogue on human trafficking, forced labour and slavery increases, prevalence data of such experiences remain limited. Methods Men from Dolakha, Nepal, who had ever migrated outside of Nepal for work were interviewed on their experiences, from predeparture to return (n=194). Forced labour was assessed among those who returned within the past 10 years (n=140) using the International Labour Organization's forced labour dimensions: (1) unfree recruitment; (2) work and life under duress; and (3) impossibility to leave employer. Forced labour is positive if any one of the dimensions is positive. Results Participants had worked in India (34%), Malaysia (34%) and the Gulf Cooperation Council countries (29%), working in factories (29%), as labourers/porters (15%) or in skilled employment (12%). Among more recent returnees (n=140), 44% experienced unfree recruitment, 71% work and life under duress and 14% impossibility to leave employer. Overall, 73% experienced forced labour during their most recent labour migration. Forced labour was more prevalent among those who had taken loans for their migration (PR 1.23) and slightly less prevalent among those who had migrated more than once (PR 0.87); however the proportion of those who experienced forced labour was still high (67%). Age, destination and duration of stay were associated with only certain dimensions of forced labour. Conclusion Forced labour experiences were common during recruitment and at destination. Migrant workers need better advice on assessing agencies and brokers, and on accessing services at destinations. As labour migration from Nepal is not likely to reduce in the near future, interventions and policies at both source and destinations need to better address the challenges migrants face so they can achieve safer outcomes. PMID:28801409

Insole optical fiber Bragg grating sensors network for dynamic vertical force monitoring

NASA Astrophysics Data System (ADS)

Domingues, Maria Fátima; Tavares, Cátia; Leitão, Cátia; Frizera-Neto, Anselmo; Alberto, Nélia; Marques, Carlos; Radwan, Ayman; Rodriguez, Jonathan; Postolache, Octavian; Rocon, Eduardo; André, Paulo; Antunes, Paulo

2017-09-01

In an era of unprecedented progress in technology and increase in population age, continuous and close monitoring of elder citizens and patients is becoming more of a necessity than a luxury. Contributing toward this field and enhancing the life quality of elder citizens and patients with disabilities, this work presents the design and implementation of a noninvasive platform and insole fiber Bragg grating sensors network to monitor the vertical ground reaction forces distribution induced in the foot plantar surface during gait and body center of mass displacements. The acquired measurements are a reliable indication of the accuracy and consistency of the proposed solution in monitoring and mapping the vertical forces active on the foot plantar sole, with a sensitivity up to 11.06 pm/N. The acquired measurements can be used to infer the foot structure and health condition, in addition to anomalies related to spine function and other pathologies (e.g., related to diabetes); also its application in rehabilitation robotics field can dramatically reduce the computational burden of exoskeletons' control strategy. The proposed technology has the advantages of optical fiber sensing (robustness, noninvasiveness, accuracy, and electromagnetic insensitivity) to surpass all drawbacks verified in traditionally used sensing systems (fragility, instability, and inconsistent feedback).

Force measurement-based discontinuity detection during friction stir welding

DOE PAGES

Shrivastava, Amber; Zinn, Michael; Duffie, Neil A.; ...

2017-02-23

Here, the objective of this work is to develop a method for detecting the creation of discontinuities ( i.e., voids, volume defects) during friction stir welding. Friction stir welding is inherently cost effective, however, the need for significant weld inspection can make the process cost prohibitive. A new approach to weld inspection is required in which an in situ characterization of weld quality can be obtained, reducing the need for postprocess inspection. To this end, friction stir welds with subsurface voids and without voids were created. The subsurface voids were generated by reducing the friction stir tool rotation frequency andmore » increasing the tool traverse speed in order to create “colder” welds. Process forces were measured during welding, and the void sizes were measured postprocess by computerized tomography ( i.e., 3D X-ray imaging). Two parameters, based on frequency domain content and time-domain average of the force signals, were found to be correlated with void size. Criteria for subsurface void detection and size prediction were developed and shown to be in good agreement with experimental observations. Furthermore, with the proper choice of data acquisition system and frequency analyzer the occurrence of subsurface voids can be detected in real time.« less

Insole optical fiber Bragg grating sensors network for dynamic vertical force monitoring.

PubMed

Domingues, Maria Fátima; Tavares, Cátia; Leitão, Cátia; Frizera-Neto, Anselmo; Alberto, Nélia; Marques, Carlos; Radwan, Ayman; Rodriguez, Jonathan; Postolache, Octavian; Rocon, Eduardo; André, Paulo; Antunes, Paulo

2017-09-01

In an era of unprecedented progress in technology and increase in population age, continuous and close monitoring of elder citizens and patients is becoming more of a necessity than a luxury. Contributing toward this field and enhancing the life quality of elder citizens and patients with disabilities, this work presents the design and implementation of a noninvasive platform and insole fiber Bragg grating sensors network to monitor the vertical ground reaction forces distribution induced in the foot plantar surface during gait and body center of mass displacements. The acquired measurements are a reliable indication of the accuracy and consistency of the proposed solution in monitoring and mapping the vertical forces active on the foot plantar sole, with a sensitivity up to 11.06 ?? pm / N . The acquired measurements can be used to infer the foot structure and health condition, in addition to anomalies related to spine function and other pathologies (e.g., related to diabetes); also its application in rehabilitation robotics field can dramatically reduce the computational burden of exoskeletons’ control strategy. The proposed technology has the advantages of optical fiber sensing (robustness, noninvasiveness, accuracy, and electromagnetic insensitivity) to surpass all drawbacks verified in traditionally used sensing systems (fragility, instability, and inconsistent feedback).

Optimizing qPlus sensor assemblies for simultaneous scanning tunneling and noncontact atomic force microscopy operation based on finite element method analysis

DOE PAGES

Dagdeviren, Omur E.; Schwarz, Udo D.

2017-03-20

Quartz tuning forks that have a probe tip attached to the end of one of its prongs while the other prong is arrested to a holder (“qPlus” configuration) have gained considerable popularity in recent years for high-resolution atomic force microscopy imaging. The small size of the tuning forks and the complexity of the sensor architecture, however, often impede predictions on how variations in the execution of the individual assembly steps affect the performance of the completed sensor. Extending an earlier study that provided numerical analysis of qPlus-style setups without tips, this work quantifies the influence of tip attachment on themore » operational characteristics of the sensor. The results using finite element modeling show in particular that for setups that include a metallic tip that is connected via a separate wire to enable the simultaneous collection of local forces and tunneling currents, the exact realization of this wire connection has a major effect on sensor properties such as spring constant, quality factor, resonance frequency, and its deviation from an ideal vertical oscillation.« less

Optimizing qPlus sensor assemblies for simultaneous scanning tunneling and noncontact atomic force microscopy operation based on finite element method analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dagdeviren, Omur E.; Schwarz, Udo D.

Quartz tuning forks that have a probe tip attached to the end of one of its prongs while the other prong is arrested to a holder (“qPlus” configuration) have gained considerable popularity in recent years for high-resolution atomic force microscopy imaging. The small size of the tuning forks and the complexity of the sensor architecture, however, often impede predictions on how variations in the execution of the individual assembly steps affect the performance of the completed sensor. Extending an earlier study that provided numerical analysis of qPlus-style setups without tips, this work quantifies the influence of tip attachment on themore » operational characteristics of the sensor. The results using finite element modeling show in particular that for setups that include a metallic tip that is connected via a separate wire to enable the simultaneous collection of local forces and tunneling currents, the exact realization of this wire connection has a major effect on sensor properties such as spring constant, quality factor, resonance frequency, and its deviation from an ideal vertical oscillation.« less

Force measurement-based discontinuity detection during friction stir welding

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shrivastava, Amber; Zinn, Michael; Duffie, Neil A.

Here, the objective of this work is to develop a method for detecting the creation of discontinuities ( i.e., voids, volume defects) during friction stir welding. Friction stir welding is inherently cost effective, however, the need for significant weld inspection can make the process cost prohibitive. A new approach to weld inspection is required in which an in situ characterization of weld quality can be obtained, reducing the need for postprocess inspection. To this end, friction stir welds with subsurface voids and without voids were created. The subsurface voids were generated by reducing the friction stir tool rotation frequency andmore » increasing the tool traverse speed in order to create “colder” welds. Process forces were measured during welding, and the void sizes were measured postprocess by computerized tomography ( i.e., 3D X-ray imaging). Two parameters, based on frequency domain content and time-domain average of the force signals, were found to be correlated with void size. Criteria for subsurface void detection and size prediction were developed and shown to be in good agreement with experimental observations. Furthermore, with the proper choice of data acquisition system and frequency analyzer the occurrence of subsurface voids can be detected in real time.« less

Levitation and guidance force relaxations of the single-seeded and multi-seeded YBCO superconductors

NASA Astrophysics Data System (ADS)

Abdioglu, M.; Ozturk, K.; Kabaer, M.; Ekici, M.

2018-01-01

The stable levitation and guidance forces at higher force levels are important parameters for technological applicability of high temperature superconductors (HTSs) in Maglev and Flywheel energy storage systems. In this study, we have investigated the levitation and guidance force relaxation of both the single-seeded and multi-seeded YBCOs for different (HTS)-permanent magnetic guideway (PMG) arrangements in different cooling heights (CH). The measured saturated force values of Halbach PMG arrangements are bigger than the maximum force values of other PMGs. It is determined that the normalized magnetic levitation force (MLF) and normalized guidance force (GF) relaxation rate values decrease while the relaxation rates increase with increasing magnetic pole number and the effective external magnetic field area for both the single-seeded and multi-seeded YBCO. Also it can be said that the force stability at the higher force value of Halbach PMG arrangement indicates that the relaxation quality of Halbach PMG is better than that of the others. Additionally, it can be said that both the MLF and GF relaxation qualities of the multi-seeded YBCOs are better than that of the single-seeded ones. This magnetic force and relaxation results of the single-seeded and multi-seeded YBCOs are useful to optimize the loading capacity and lateral reliability of HTS Maglev and similar magnetic bearing systems.

Work/Family Interactions: Trends and Applications.

ERIC Educational Resources Information Center

Engelbrecht, JoAnn D.; Nies, Joyce I.

1988-01-01

The authors discuss five trends and how family life educators can address them. The trends are (1) women's labor force participation, (2) growth of the service sector, (3) recognition that work and family life affect each other, (4) space sharing by work and family life, and (5) aging of the work force. (CH)

A Report of the Child Labor Task Force.

ERIC Educational Resources Information Center

Oregon State Bureau of Labor and Industry, Portland.

A task force studied youth work and its impact on the health, education, and safety of 16- and 17-year-olds. The study covered such issues as the following: effects of work on school performance, work's physical and psychological effects on young people, the effects work can have on young people's preparation for lifelong work, and what steps can…

Work-Family Spillover and Daily Reports of Work and Family Stress in the Adult Labor Force.

ERIC Educational Resources Information Center

Grzywacz, Joseph G.; Almeida, David M.; McDonald, Daniel A.

2002-01-01

Data from two affiliated national surveys were used to examine distribution of work-family spillover among working adults. Analyses testing family life course hypotheses indicated self-reported negative and positive spillover between work and family were not randomly distributed within the labor force. Age was found to have a persistent…

Snow driven Radiative Forcing in High Latitude Areas of Disturbance Using Higher Resolution Albedo Products from Landsat and Sentinel-2

NASA Astrophysics Data System (ADS)

Erb, A.; Li, Z.; Schaaf, C.; Wang, Z.; Rogers, B. M.

2017-12-01

Land surface albedo plays an important role in the surface energy budget and radiative forcing by determining the proportion of absorbed incoming solar radiation available to drive photosynthesis and surface heating. In Arctic regions, albedo is particularly sensitive to land cover and land use change (LCLUC) and modeling efforts have shown it to be the primary driver of effective radiative forcing from the biogeophysical effects of LCLUC. In boreal forests, the effects of these changes are complicated during snow covered periods when newly exposed, highly reflective snow can serve as the primary driver of radiative forcing. In Arctic biomes disturbance scars from fire, pest and harvest can remain in the landscape for long periods of time. As such, understanding the magnitude and persistence of these disturbances, especially in the shoulder seasons, is critical. The Landsat and Sentinel-2 Albedo Products couple 30m and 20m surface reflectances with concurrent 500m BRDF Products from the MODerate resolution Imaging Spectroradiometer (MODIS). The 12 bit radiometric fidelity of Sentinel-2 and Landsat-8 allow for the inclusion of high-quality, unsaturated albedo calculations over snow covered surfaces at scales more compatible with fragmented landscapes. Recent work on the early spring albedo of fire scars has illustrated significant post-fire spatial heterogeneity of burn severity at the landscape scale and highlights the need for a finer spatial resolution albedo record. The increased temporal resolution provided by multiple satellite instruments also allows for a better understanding of albedo dynamics during the dynamic shoulder seasons and in historically difficult high latitude locations where persistent cloud cover limits high quality retrievals. Here we present how changes in the early spring albedo of recent boreal forest disturbance in Alaska and central Canada affects landscape-scale radiative forcing. We take advantage of the long historical Landsat record to examine pre-disturbance albedo trends and to link historical land cover and disturbance history to post-disturbance early spring albedo values. We examine the impact of landscape heterogeneity on albedo in the growing and dormant seasons and quantify the effects of snow exposure changes from over-story canopy loss.

Results of telerobotic hand controller study using force information and rate control

NASA Technical Reports Server (NTRS)

Willshire, Kelli F.; Harrison, F. W.; Hogge, Edward F.; Williams, Robert L.; Soloway, Donald

1992-01-01

To increase quantified information about the effectiveness and subjective workload of force information relayed through manipulator input control devices, a space related task was performed by eight subjects with kinesthetic force feedback and/or local force accommodation through three different input control devices (i.e., hand controllers) operating in rate control mode. Task completion time, manipulator work, and subjective responses were measured. Results indicated a difference among the hand controllers. For the Honeywell six degree-of-freedom hand controller, the overall task completion times were shortest, the amount of work exerted was the least, and was the most preferred by test subjects. Neither force accommodation with or without reflection resulted in shorter task completion times or reduced work although those conditions were better than no force information for some aspects. Comparisons of results from previous studies are discussed.

Micromechanism linear actuator with capillary force sealing

DOEpatents

Sniegowski, Jeffry J.

1997-01-01

A class of micromachine linear actuators whose function is based on gas driven pistons in which capillary forces are used to seal the gas behind the piston. The capillary forces also increase the amount of force transmitted from the gas pressure to the piston. In a major subclass of such devices, the gas bubble is produced by thermal vaporization of a working fluid. Because of their dependence on capillary forces for sealing, such devices are only practical on the sub-mm size scale, but in that regime they produce very large force times distance (total work) values.

Institutional food as a lever for improving health in cities: the case of New York City.

PubMed

Tsui, E K; Wurwarg, J; Poppendieck, J; Deutsch, J; Freudenberg, N

2015-04-01

To describe and examine the factors that most facilitate and impede the provision of healthy foods in a complex institutional food system. Comparative case study of three institutional food settings in New York City. Document review and interviews with relevant city government staff. Factors that facilitate and impede the provision of healthy food vary across institutional food settings, and particularly between centralized and decentralized settings. Generally pro-health factors include centralized purchasing and the ability to work with vendors to formulate items to improve nutritional quality, though decentralized purchasing may offer more flexibility to work with vendors offering healthier food items and to respond to consumer preferences. Factors most often working against health in more centralized systems include financing constraints that are unique to particular settings. In less centralized systems, factors working against health may include both financing constraints and factors that are site-specific, relating to preparation and equipment. Making changes to institutional food systems that will meaningfully influence public health requires a detailed understanding of the diverse systems supporting and shaping public food provision. Ultimately, the cases in this study demonstrate that agency staff typically would like to provide healthier foods, but often feel limited by the competing objectives of affordability and consumer preference. Their ability to address these competing objectives is shaped by a combination of both forces external to the institution, like nutritional regulations, and internal forces, like an agency's structure, and motivation on the part of staff. Copyright © 2014 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Hispanics in the Work Force, Part II: Hispanic Women.

ERIC Educational Resources Information Center

Escutia, Marta M.; Prieto, Margarita

This paper evaluates the status of Hispanic women in the United States work force. First, demographic information on age patterns, fertility rates, and educational attainment is reviewed. Then, labor market status is assessed in relation to Hispanic women's labor force participation, employment patterns, and poverty. Next, the Federal response to…

The effect of obesity on the contractile performance of isolated mouse soleus, EDL, and diaphragm muscles.

PubMed

Tallis, Jason; Hill, Cameron; James, Rob S; Cox, Val M; Seebacher, Frank

2017-01-01

Obesity affects the major metabolic and cellular processes involved in skeletal muscle contractility. Surprisingly, the effect of obesity on isolated skeletal muscle performance remains unresolved. The present study is the first to examine the muscle-specific changes in contractility following dietary-induced obesity using an isolated muscle work-loop (WL) model that more closely represents in vivo muscle performance. Following 16-wk high-calorific feeding, soleus (SOL), extensor digitorum longus (EDL), and diaphragm (DIA) were isolated from female (CD-1) mice, and contractile performance was compared against a lean control group. Obese SOL produced greater isometric force; however, isometric stress (force per unit muscle area), absolute WL power, and normalized WL power (watts per kilogram muscle mass) were unaffected. Maximal isometric force and absolute WL power of the EDL were similar between groups. For both EDL and DIA, isometric stress and normalized WL power were reduced in the obese groups. Obesity caused a significant reduction in fatigue resistance in all cases. Our findings demonstrate a muscle-specific reduction in contractile performance and muscle quality that is likely related to in vivo mechanical role, fiber type, and metabolic profile, which may in part be related to changes in myosin heavy chain expression and AMP-activated protein kinase activity. These results infer that, beyond the additional requirement of moving a larger body mass, functional performance and quality of life may be further limited by poor muscle function in obese individuals. As such, a reduction in muscle performance may be a substantial contributor to the negative cycle of obesity. The effect of obesity on isolated muscle function is surprisingly underresearched. The present study is the first to examine the effects of obesity on isolated muscle performance using a method that more closely represents real-world muscle function. This work uniquely establishes a muscle-specific profile of mechanical changes in relation to underpinning mechanisms. These findings may be important to understanding the negative cycle of obesity and in designing interventions for improving weight status. Copyright © 2017 the American Physiological Society.

Electroacoustics modeling of piezoelectric welders for ultrasonic additive manufacturing processes

NASA Astrophysics Data System (ADS)

Hehr, Adam; Dapino, Marcelo J.

2016-04-01

Ultrasonic additive manufacturing (UAM) is a recent 3D metal printing technology which utilizes ultrasonic vibrations from high power piezoelectric transducers to additively weld similar and dissimilar metal foils. CNC machining is used intermittent of welding to create internal channels, embed temperature sensitive components, sensors, and materials, and for net shaping parts. Structural dynamics of the welder and work piece influence the performance of the welder and part quality. To understand the impact of structural dynamics on UAM, a linear time-invariant model is used to relate system shear force and electric current inputs to the system outputs of welder velocity and voltage. Frequency response measurements are combined with in-situ operating measurements of the welder to identify model parameters and to verify model assumptions. The proposed LTI model can enhance process consistency, performance, and guide the development of improved quality monitoring and control strategies.

Estimation of tool wear during CNC milling using neural network-based sensor fusion

NASA Astrophysics Data System (ADS)

Ghosh, N.; Ravi, Y. B.; Patra, A.; Mukhopadhyay, S.; Paul, S.; Mohanty, A. R.; Chattopadhyay, A. B.

2007-01-01

Cutting tool wear degrades the product quality in manufacturing processes. Monitoring tool wear value online is therefore needed to prevent degradation in machining quality. Unfortunately there is no direct way of measuring the tool wear online. Therefore one has to adopt an indirect method wherein the tool wear is estimated from several sensors measuring related process variables. In this work, a neural network-based sensor fusion model has been developed for tool condition monitoring (TCM). Features extracted from a number of machining zone signals, namely cutting forces, spindle vibration, spindle current, and sound pressure level have been fused to estimate the average flank wear of the main cutting edge. Novel strategies such as, signal level segmentation for temporal registration, feature space filtering, outlier removal, and estimation space filtering have been proposed. The proposed approach has been validated by both laboratory and industrial implementations.

Employee Involvement White Collar Work Force (Phase 1)

DTIC Science & Technology

1991-07-01

TITLE AND SUBTITLE Employee Involvement White Collar Work Force (Phase 1) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S...N COMMITTEE August 1991 NSRP 0337 AL EFFECTS TRANSFER Employee Involvement White Collar Work Force (Phase 1) UNITED STATES NAVY David Taylor Research...report. AS used In the above, “Persons acting on behalf of the United States Navy” includes any employee , contractor, or subcontractor to the

Women Who Work, Part 2: Married Women in the Labour Force: The Influence of Age, Education, Child-Bearing Status and Residence. Special Labour Force Studies Series B, No. 2.

ERIC Educational Resources Information Center

Allingham, John D.; Spencer, Byron G.

To followup an earlier study of the relative importance of age, education, and marital status as variables influencing female participation in the labor force, this research attempts to measure the relative importance of similar factors in determining whether or not a woman works or wishes to work. Particular emphasis was given to such…

Effects of thread interruptions on tool pins in friction stir welding of AA6061

DOE PAGES

Reza-E-Rabby, Md.; Tang, Wei; Reynolds, Anthony P.

2017-06-21

In this paper, effects of pin thread and thread interruptions (flats) on weld quality and process response parameters during friction stir welding (FSW) of 6061 aluminium alloy were quantified. Otherwise, identical smooth and threaded pins with zero to four flats were adopted for FSW. Weldability and process response variables were examined. Results showed that threads with flats significantly improved weld quality and reduced in-plane forces. A three-flat threaded pin led to production of defect-free welds under all examined welding conditions. Spectral analyses of in-plane forces and weld cross-sectional analysis were performed to establish correlation among pin flats, force dynamics andmore » defect formation. Finally, the lowest in-plane force spectra amplitudes were consistently observed for defect-free welds.« less

Effects of thread interruptions on tool pins in friction stir welding of AA6061

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reza-E-Rabby, Md.; Tang, Wei; Reynolds, Anthony P.

In this paper, effects of pin thread and thread interruptions (flats) on weld quality and process response parameters during friction stir welding (FSW) of 6061 aluminium alloy were quantified. Otherwise, identical smooth and threaded pins with zero to four flats were adopted for FSW. Weldability and process response variables were examined. Results showed that threads with flats significantly improved weld quality and reduced in-plane forces. A three-flat threaded pin led to production of defect-free welds under all examined welding conditions. Spectral analyses of in-plane forces and weld cross-sectional analysis were performed to establish correlation among pin flats, force dynamics andmore » defect formation. Finally, the lowest in-plane force spectra amplitudes were consistently observed for defect-free welds.« less

Imaging contrast and tip-sample interaction of non-contact amplitude modulation atomic force microscopy with Q-control

NASA Astrophysics Data System (ADS)

Shi, Shuai; Guo, Dan; Luo, Jianbin

2017-10-01

Active quality factor (Q) exhibits many promising properties in dynamic atomic force microscopy. Energy dissipation and image contrasts are investigated in the non-contact amplitude modulation atomic force microscopy (AM-AFM) with an active Q-control circuit in the ambient air environment. Dissipated power and virial were calculated to compare the highly nonlinear interaction of tip-sample and image contrasts with different Q gain values. Greater free amplitudes and lower effective Q values show better contrasts for the same setpoint ratio. Active quality factor also can be employed to change tip-sample interaction force in non-contact regime. It is meaningful that non-destructive and better contrast images can be realized in non-contact AM-AFM by applying an active Q-control to the dynamic system.

Labor-force participation of older married women.

PubMed

Henretta, J C; O'Rand, A M

1980-08-01

This article utilizes the 1969, 1971, and 1973 waves of the Longitudinal Retirement History Study (LRHS) to examine stopping work by working wives of respondents. Different patterns of labor-force participation reveal that younger wives of respondents were more likely to work than were older wives. Most wives did not reenter the labor force after leaving it. The determinants of stopping or continuing work in 1969-73 for those wives who worked in 1969 were also examined. Although the patterns were somewhat different for younger wives, two factors stand out: Coverage of the wife by a private pension plan and providing for children or elderly parents have substantial effects on the probability of continuing work.

Proposed MIL Standard and Handbook - Flying Qualities of Air Vehicles. Volume I. Proposed MIL Standard

DTIC Science & Technology

1982-11-01

control 4centering and breakout forces 21 3.2.9.6 Pitch axis control forces- free play 21 3.2.9.7 Pitch axis control force limits 21 3.2.9.7.1 Pitch axis...axis control forces - control centering and breakout forces 31 *3.5.10.5 Roll axis control forces -- free play 31 3.5.10.6 Roll axis control force limits...vs. deflection 3.2.9.5 Control centering and -- no(-) to homin and hOax breakout forces no(*) 3.2.9.6 Free play I 3.2.9.7.1 Force limits -- takeoff

A novel approach to the analysis of squeezed-film air damping in microelectromechanical systems

NASA Astrophysics Data System (ADS)

Yang, Weilin; Li, Hongxia; Chatterjee, Aveek N.; Elfadel, Ibrahim (Abe M.; Ender Ocak, Ilker; Zhang, TieJun

2017-01-01

Squeezed-film damping (SFD) is a phenomenon that significantly affects the performance of micro-electro-mechanical systems (MEMS). The total damping force in MEMS mainly include the viscous damping force and elastic damping force. Quality factor (Q factor) is usually used to evaluate the damping in MEMS. In this work, we measure the Q factor of a resonator through experiments in a wide range of pressure levels. In fact, experimental characterizations of MEMS have some limitations because it is difficult to conduct experiments at very high vacuum and also hard to differentiate the damping mechanisms from the overall Q factor measurements. On the other hand, classical theoretical analysis of SFD is restricted to strong assumptions and simple geometries. In this paper, a novel numerical approach, which is based on lattice Boltzmann simulations, is proposed to investigate SFD in MEMS. Our method considers the dynamics of squeezed air flow as well as fluid-solid interactions in MEMS. It is demonstrated that Q factor can be directly predicted by numerical simulation, and our simulation results agree well with experimental data. Factors that influence SFD, such as pressure, oscillating amplitude, and driving frequency, are investigated separately. Furthermore, viscous damping and elastic damping forces are quantitatively compared based on comprehensive simulation. The proposed numerical approach as well as experimental characterization enables us to reveal the insightful physics of squeezed-film air damping in MEMS.

Does disability status modify the association between psychosocial job quality and mental health? A longitudinal fixed-effects analysis.

PubMed

Milner, A; Krnjacki, L; Butterworth, P; Kavanagh, A; LaMontagne, Anthony D

2015-11-01

People with disabilities have difficulties in obtaining work. However, evidence suggests that those with disabilities derive substantial mental health benefits from employment. This paper assesses how the relationship between work and mental health is influenced by psychosocial job quality for people working with a disability. The study design was a longitudinal cohort with 13 annual waves of data collection, yielding a sample of 122,883 observations from 21,848 people. Fixed-effects within-person regression was used to control for time invariant confounding. The Mental Component Summary (MCS) of the Short Form 36 (SF-36) measure was used as the primary outcome measure. The main exposure was a six-category measure of psychosocial job quality and employment status (including 'not in the labour force' [NILF] and unemployment). Disability status ('no waves of disability reported' and 'all contributed waves with reported disability') was assessed as an effect modifier. We also conducted a secondary analysis on respondents contributing both disability and non-disability waves. For those with no disability, the greatest difference in mental health (compared to optimal employment) occurs when people have the poorest quality jobs (-2.12, 95% CI -2.48, -1.75, p < 0.001). The relative difference in mental health was less in relation to NILF and unemployment (-0.39 and -0.66 respectively). For those with consistent disability, the difference in mental health when employed in an optimal job was similar between the poorest quality jobs (-2.25, 95% CI -3.84, -0.65, p = 0.006), NILF (-2.84, 95% CI -4.49, -1.20, p = 0.001) or unemployment (-2.56, 95% CI -4.32, -0.80, p = 0.004). These results were confirmed by the secondary analysis. Efforts to improve psychosocial job quality may have significant mental health benefits for people with disabilities. This will contribute to the economic viability of disability employment insurance schemes in Australia and other high-income countries. Copyright © 2015 Elsevier Ltd. All rights reserved.

Fabrication of high-quality single-crystal Cu thin films using radio-frequency sputtering.

PubMed

Lee, Seunghun; Kim, Ji Young; Lee, Tae-Woo; Kim, Won-Kyung; Kim, Bum-Su; Park, Ji Hun; Bae, Jong-Seong; Cho, Yong Chan; Kim, Jungdae; Oh, Min-Wook; Hwang, Cheol Seong; Jeong, Se-Young

2014-08-29

Copper (Cu) thin films have been widely used as electrodes and interconnection wires in integrated electronic circuits, and more recently as substrates for the synthesis of graphene. However, the ultra-high vacuum processes required for high-quality Cu film fabrication, such as molecular beam epitaxy (MBE), restricts mass production with low cost. In this work, we demonstrated high-quality Cu thin films using a single-crystal Cu target and radio-frequency (RF) sputtering technique; the resulting film quality was comparable to that produced using MBE, even under unfavorable conditions for pure Cu film growth. The Cu thin film was epitaxially grown on an Al2O3 (sapphire) (0001) substrate, and had high crystalline orientation along the (111) direction. Despite the 10(-3) Pa vacuum conditions, the resulting thin film was oxygen free due to the high chemical stability of the sputtered specimen from a single-crystal target; moreover, the deposited film had >5× higher adhesion force than that produced using a polycrystalline target. This fabrication method enabled Cu films to be obtained using a simple, manufacturing-friendly process on a large-area substrate, making our findings relevant for industrial applications.

Total Quality Management: A Recipe for Success

DTIC Science & Technology

1990-04-02

Total Quality Management (TQM) is a high level Department of Defense (DOD) initiative that is being touted as the primary management tool to force...to create a DOD wide organizational climate that will stimulate and perpetuate individual productivity enhancing contributions. Keywords: Quality control; Quality management ; TQM.

[Some psychological problems in family planning work].

PubMed

Chen, J

1983-11-29

Psychology has significance in family planning work, because it may promote the scientific nature of family planning work and thus increase its effectiveness. Since people have some common aspects in their psychological process, family planning workers should master some common rules of the people's psychological process in order to understand psychological trends and possible behavior. Through this method, family planning workers may find how to adjust to problems they may encounter in their daily work, such as the worries about a single child being too lonely, spoiled, and hard to handle for the parents, the traditional belief that more children represent good fortune, and more male children may provide security for one's old age. Traditionally, the Chinese people believed that only male children can carry on the family line and that more children will provide a larger labor force, which is beneficial to a family's financial situation. In family planning work, all such incorrect ways of thinking should be corrected and revised. Studies of children's psychology should also be developed so that children may develop a healthy mentality. All these are crucial to the success of family planning work and the promotion of population quality.

Composite adaptive control of belt polishing force for aero-engine blade

NASA Astrophysics Data System (ADS)

Zhsao, Pengbing; Shi, Yaoyao

2013-09-01

The existing methods for blade polishing mainly focus on robot polishing and manual grinding. Due to the difficulty in high-precision control of the polishing force, the blade surface precision is very low in robot polishing, in particular, quality of the inlet and exhaust edges can not satisfy the processing requirements. Manual grinding has low efficiency, high labor intensity and unstable processing quality, moreover, the polished surface is vulnerable to burn, and the surface precision and integrity are difficult to ensure. In order to further improve the profile accuracy and surface quality, a pneumatic flexible polishing force-exerting mechanism is designed and a dual-mode switching composite adaptive control(DSCAC) strategy is proposed, which combines Bang-Bang control and model reference adaptive control based on fuzzy neural network(MRACFNN) together. By the mode decision-making mechanism, Bang-Bang control is used to track the control command signal quickly when the actual polishing force is far away from the target value, and MRACFNN is utilized in smaller error ranges to improve the system robustness and control precision. Based on the mathematical model of the force-exerting mechanism, simulation analysis is implemented on DSCAC. Simulation results show that the output polishing force can better track the given signal. Finally, the blade polishing experiments are carried out on the designed polishing equipment. Experimental results show that DSCAC can effectively mitigate the influence of gas compressibility, valve dead-time effect, valve nonlinear flow, cylinder friction, measurement noise and other interference on the control precision of polishing force, which has high control precision, strong robustness, strong anti-interference ability and other advantages compared with MRACFNN. The proposed research achieves high-precision control of the polishing force, effectively improves the blade machining precision and surface consistency, and significantly reduces the surface roughness.

The Labor Force Participation of Older Women: Retired? Working? Both?

ERIC Educational Resources Information Center

Hill, Elizabeth T.

2002-01-01

Noneconomic factors such as level of education, job flexibility in work hours, and physical stress appear to influence older women's labor force participation resulting in many retired women who are employed. Some women classified as retired work nearly as many hours as those employed, although many employed older women work part time. (Contains…

Aging Work Force Brings New Look at Teacher Retirement.

ERIC Educational Resources Information Center

Auriemma, Frank V.; And Others

1992-01-01

Higher salaries and improved working conditions have combined to make teaching a more attractive profession and to reduce teacher turnover rates. At the same time, however, the teaching work force has aged and faces problems in retirement programs. All levels of government should work with interested groups to find solutions to six major problems…

Planning and Implementing total Quality Management in an Air Force Service Organization: A Case Study

DTIC Science & Technology

1988-09-01

Quality Management (TQM). Documentation of such implementation methods can provide useful crossfeed to other services organizations attempting similiar efforts. The following research questions were addressed to present the case in a useful context for interpretation: (1) What is TQM and how will it be implemented in AFALC; (2) How can the quality of service organizations be improved and what techniques may be useful for this purpose; (3) How does the environment at AFALC differ from most Air Force organizations implementing TQM and what obstacles must it overcome; (4) How

Challenges of Enterprise Wide AM for Air Force Sustainment

DTIC Science & Technology

2016-12-01

December 2016 Naguy is chief of the Air Force Life Cycle Management Center’s Product Support Engineering Division at Wright Patterson Air Force Base in...today and into the future. To truly capitalize on the full potential of AM, the Air Force Life Cycle Management Center (AFLCMC) in close collabora...approach for material standards and quality include un- derstanding powder characteristics, developing an enterprise material characterization

Enhancing Coordination Among the U.S. Preventive Services Task Force, Agency for Healthcare Research and Quality, and National Institutes of Health.

PubMed

Murray, David M; Kaplan, Robert M; Ngo-Metzger, Quyen; Portnoy, Barry; Olkkola, Susanne; Stredrick, Denise; Kuczmarski, Robert J; Goldstein, Amy B; Perl, Harold I; O'Connell, Mary E

2015-09-01

This paper focuses on the relationships among the U.S. Preventive Services Task Force (USPSTF); Agency for Healthcare Research and Quality (AHRQ); and NIH. After a brief description of the Task Force, AHRQ, NIH, and an example of how they interact, we describe the steps that have been taken recently by NIH to enhance their coordination. We also discuss several challenges that remain and consider potential remedies that NIH, AHRQ, and investigators can take to provide the USPSTF with the data it needs to make recommendations, particularly those pertaining to behavioral interventions. Published by Elsevier Inc.

Youth Employment. Final Recommendations of the State Superintendent's Task Force.

ERIC Educational Resources Information Center

Wisconsin State Dept. of Public Instruction, Madison.

This report contains the final recommendations of the task force on youth employment for the state of Wisconsin. The task force was specifically charged with studying issues related to working teenagers, reviewing existing laws and regulations on child labor, and developing recommendations to ensure that when teenagers work, their jobs do not…

Labor Force

ERIC Educational Resources Information Center

Occupational Outlook Quarterly, 2010

2010-01-01

The labor force is the number of people aged 16 or older who are either working or looking for work. It does not include active-duty military personnel or institutionalized people, such as prison inmates. Quantifying this total supply of labor is a way of determining how big the economy can get. Labor force participation rates vary significantly…

Company fires worker after test reveals AIDS drug in his blood.

PubMed

1996-02-09

[Name removed], a vitamin and herbal supplement manufacturer, claims that it terminated [name removed] because of the presence of a cannabinoid in his blood, not because he has AIDS. A random drug test revealed that Mr. [Name removed], a quality control inspector, had Marinol in his blood, a medication prescribed to enhance appetite. [Name removed]'s AIDS status was revealed when [name removed]'s physician proved that the prescription was legitimate. Solaray's policy allows AIDS patients to continue working as long as they meet acceptable performance standards. The American Civil Liberties Union Foundation of Utah filed suit on [name removed]'s behalf. Concomitantly, the U.S. Equal Employment Opportunity Commission (EEOC) concluded that [name removed] violates the Americans with Disabilities Act (ADA) by demanding medical records and forcing workers to undergo periodic medical exams. [Name removed] justifies its demand by citing an obligation to protect all employees, customers, and other visitors. [Name removed] has refused to settle out of court or to allow [name removed] to return to work. The company contends that Marinol, a psychoactive substance, negatively affects [name removed]'s ability to perform quality control tasks. Attorneys for [name removed] will begin the deposition process in February 1996.

The challenge of an aging work force: keeping older workers employed and employable.

PubMed

Rix, S E

1996-01-01

This article reviews labor-force trends and older-worker employment policies in Japan and the United States. Both countries have aging work forces, but Japan's labor force is and for some time has been older than that of the United States. Japan's Ministry of Labor began addressing older-worker issues over 30 years ago and in the ensuing years has promulgated numerous initiatives to extend working life. Mandatory retirement, however, remains both legal and common in Japan, yet labor-force participation rates are higher for older persons in that country than in the United States, where mandatory retirement is illegal. Japan's older-worker programs and policies clearly seem to have an impact on labor-force rates, although those rates are dropping among the elderly in Japan as well as in the United States. The transferability of these programs and policies to the United States is discussed.

Effect of forced use of the lower extremity on gait performance and mobility of post-acute stroke patients

PubMed Central

Yu, Wen-Hsiu; Liu, Wen-Yu; Wong, Alice May-Kuen; Wang, Tzu-Chi; Li, Yen-Chen; Lien, Hen-Yu

2015-01-01

[Purpose] The purpose of this study was to investigate the effects of a forced-use training program on gait, mobility and quality of life of post-acute stroke patients. [Subjects] Twenty-one individuals with unilateral stroke participated in this study. All participants had suffered from first-ever stroke with time since onset of at least 3 months. [Methods] A single-blinded, non-equivalent, pre-post controlled design with 1-month follow-up was adopted. Participants received either a forced-use or a conventional physical therapy program for 2 weeks. The main outcomes assessed were preferred and fastest walking velocities, spatial and temporal symmetry indexes of gait, the timed up and go test, the Rivermead Mobility Index, and the Stroke-Specific Quality of Life Scale (Taiwan version). [Results] Forced-use training induced greater improvements in gait and mobility than conventional physical therapy. In addition, compared to pre-training, patients in the conventional physical therapy group walked faster but more asymmetrically after training. However, neither program effectively improved in-hospital quality of life. [Conclusion] The forced-use approach can be successfully applied to the lower extremities of stroke patients to improve mobility, walking speeds and symmetry of gait. PMID:25729182

Does temperature nudging overwhelm aerosol radiative effects in regional integrated climate models?

NASA Astrophysics Data System (ADS)

He, Jian; Glotfelty, Timothy; Yahya, Khairunnisa; Alapaty, Kiran; Yu, Shaocai

2017-04-01

Nudging (data assimilation) is used in many regional integrated meteorology-air quality models to reduce biases in simulated climatology. However, in such modeling systems, temperature changes due to nudging could compete with temperature changes induced by radiatively active and hygroscopic short-lived tracers leading to two interesting dilemmas: when nudging is continuously applied, what are the relative sizes of these two radiative forces at regional and local scales? How do these two forces present in the free atmosphere differ from those present at the surface? This work studies these two issues by converting temperature changes due to nudging into pseudo radiative effects (PRE) at the surface (PRE_sfc), in troposphere (PRE_atm), and at the top of atmosphere (PRE_toa), and comparing PRE with the reported aerosol radiative effects (ARE). Results show that the domain-averaged PRE_sfc is smaller than ARE_sfc estimated in previous studies and this work, but could be significantly larger than ARE_sfc at local scales. PRE_atm is also much smaller than ARE_atm. These results indicate that appropriate nudging methodology could be applied to the integrated models to study aerosol radiative effects at continental/regional scales, but it should be treated with caution for local scale applications.

The ISTSS/Rand guidelines on mental health training of primary healthcare providers for trauma-exposed populations in conflict-affected countries.

PubMed

Eisenman, David; Weine, Stevan; Green, Bonnie; de Jong, Joop; Rayburn, Nadine; Ventevogel, Peter; Keller, Allen; Agani, Ferid

2006-02-01

Mental health care for trauma-exposed populations in conflict-affected developing countries often is provided by primary healthcare providers (PHPs), including doctors, nurses, and lay health workers. The Task Force on International Trauma Training, through an initiative sponsored by the International Society for Traumatic Stress Studies and the RAND Corporation, has developed evidence- and consensus-based guidelines for the mental health training of PHPs in conflict-affected developing countries. This article presents the Guidelines, which provide a conceptual framework and specific principles for improving the quality of mental health training for PHPs working with trauma-exposed populations.

W.R. Grove and the fuel cell

NASA Astrophysics Data System (ADS)

Meurig Thomas, John

2012-11-01

Though known these days largely because he invented the fuel cell, Grove also had many other distinguished achievements to his credit. His monumental book On the Correlation of Physical Forces contained all the arguments that led to the enunciation of the first law of thermodynamics. He was also an extremely versatile natural philosopher who was, in addition, well versed in classical literature, particularly the works of the eminent scholars of ancient Greece and Rome. This article touches upon these qualities, but is predominantly concerned with the emergence and modern aspects of the H2/O2 fuel cell and its potential for the clean generation of energy.

Moving out of one's comfort zone: developing and teaching an interprofessional research course.

PubMed

Berman, Rosemarie O

2013-07-01

Teamwork and interprofessional collaboration have long been identified as core competencies for achieving quality, safe, patient-centered care. The shared learning environment of an interprofessional course is one method for developing the foundation for a collaborative practice-ready work force. Developing and teaching a course for students in a variety of health professions can be challenging as faculty move beyond the comfort level of their discipline. This article describes the development of an interprofessional research course to meet the needs of different health disciplines with specific teaching strategies to develop core competencies for interprofessional collaboration and practice. Copyright 2013, SLACK Incorporated.

A specialized bioengineering ion beam line

NASA Astrophysics Data System (ADS)

Yu, L. D.; Sangyuenyongpipat, S.; Sriprom, C.; Thongleurm, C.; Suwanksum, R.; Tondee, N.; Prakrajang, K.; Vilaithong, T.; Brown, I. G.; Wiedemann, H.

2007-04-01

A specialized bioengineering ion beam line has recently been completed at Chiang Mai University to meet rapidly growing needs of research and application development in low-energy ion beam biotechnology. This beam line possesses special features: vertical main beam line, low-energy (30 keV) ion beams, double swerve of the beam, a fast pumped target chamber, and an in-situ atomic force microscope (AFM) system chamber. The whole beam line is situated in a bioclean environment, occupying two stories. The quality of the ion beam has been studied. It has proved that this beam line has significantly contributed to our research work on low-energy ion beam biotechnology.

Ellipsometric study of peptide layers - island-like character, depolarization and quasi-absorption

NASA Astrophysics Data System (ADS)

Pápa, Z.; Ramakrishnan, S.; Martin, M.; Cloitre, T.; Zimányi, L.; Tóth, Z.; Gergely, C.; Budai, J.

2017-11-01

In this work, the ellipsometric measurements of small molecular size polypeptides deposited onto silicon are analyzed. Results of ellipsometric evaluation procedures based on transparent layer, absorbing layer and discontinuous layer approaches are compared. Although these models result in similar fitting quality and can predict the amount of the deposited material, the gained optical properties can be rather different due to the different assumptions of the models. To choose the physically correct results, independent measurements as atomic force microscopy or transmission measurement of peptide solutions are necessary. It is shown that the measured ellipsometric depolarization can provide also useful information about the sample properties.

Extracting dirt from water: a strengths-based approach to religion for African American same-gender-loving men.

PubMed

Lassiter, Jonathan Mathias

2014-02-01

Religion is one of the most powerful and ubiquitous forces in African American same-gender-loving (SGL) men's lives. Research indicates that it has both positive and negative influences on the health behaviors and outcomes of this population. This paper presents a review of the literature that examines religion as a risk and protective factor for African American SGL men. A strengths-based approach to religion that aims to utilize its protective qualities and weaken its relation to risk is proposed. Finally, recommendations are presented for the use of a strengths-based approach to religion in clinical work and research.

In Situ Roughness Measurements for the Solar Cell Industry Using an Atomic Force Microscope

PubMed Central

González-Jorge, Higinio; Alvarez-Valado, Victor; Valencia, Jose Luis; Torres, Soledad

2010-01-01

Areal roughness parameters always need to be under control in the thin film solar cell industry because of their close relationship with the electrical efficiency of the cells. In this work, these parameters are evaluated for measurements carried out in a typical fabrication area for this industry. Measurements are made using a portable atomic force microscope on the CNC diamond cutting machine where an initial sample of transparent conductive oxide is cut into four pieces. The method is validated by making a comparison between the parameters obtained in this process and in the laboratory under optimal conditions. Areal roughness parameters and Fourier Spectral Analysis of the data show good compatibility and open the possibility to use this type of measurement instrument to perform in situ quality control. This procedure gives a sample for evaluation without destroying any of the transparent conductive oxide; in this way 100% of the production can be tested, so improving the measurement time and rate of production. PMID:22319338

In situ roughness measurements for the solar cell industry using an atomic force microscope.

PubMed

González-Jorge, Higinio; Alvarez-Valado, Victor; Valencia, Jose Luis; Torres, Soledad

2010-01-01

Areal roughness parameters always need to be under control in the thin film solar cell industry because of their close relationship with the electrical efficiency of the cells. In this work, these parameters are evaluated for measurements carried out in a typical fabrication area for this industry. Measurements are made using a portable atomic force microscope on the CNC diamond cutting machine where an initial sample of transparent conductive oxide is cut into four pieces. The method is validated by making a comparison between the parameters obtained in this process and in the laboratory under optimal conditions. Areal roughness parameters and Fourier Spectral Analysis of the data show good compatibility and open the possibility to use this type of measurement instrument to perform in situ quality control. This procedure gives a sample for evaluation without destroying any of the transparent conductive oxide; in this way 100% of the production can be tested, so improving the measurement time and rate of production.

Dilemmas and controversies within civilian and military organizations in the execution of humanitarian aid in Iraq: a review.

PubMed

Morton, Melinda J; Burnham, Gilbert M

2010-01-01

Civilian humanitarian assistance organizations and military forces are working in a similar direction in many humanitarian operations around the world. However, tensions exist over the role of the military in such operations. The purpose of this article is to review cultural perspectives of civilian and military actors and to discuss recent developments in civil-military humanitarian collaboration in the provision of health services in Iraq for guiding such collaborative efforts in postconflict and other settings in future. Optimal collaborative efforts are most likely to be achieved through the following tenets: defining appropriate roles for military forces at the beginning of humanitarian operations (optimally the provision of transportation, logistical coordination, and security), promoting development of ongoing relationships between civilian and military agencies, establishment of humanitarian aid training programs for Department of Defense personnel, and the need for the military to develop and use quantitative aid impact indicators for assuring quality and effectiveness of humanitarian aid.

Predicting Structure-Function Relations and Survival following Surgical and Bronchoscopic Lung Volume Reduction Treatment of Emphysema.

PubMed

Mondoñedo, Jarred R; Suki, Béla

2017-02-01

Lung volume reduction surgery (LVRS) and bronchoscopic lung volume reduction (bLVR) are palliative treatments aimed at reducing hyperinflation in advanced emphysema. Previous work has evaluated functional improvements and survival advantage for these techniques, although their effects on the micromechanical environment in the lung have yet to be determined. Here, we introduce a computational model to simulate a force-based destruction of elastic networks representing emphysema progression, which we use to track the response to lung volume reduction via LVRS and bLVR. We find that (1) LVRS efficacy can be predicted based on pre-surgical network structure; (2) macroscopic functional improvements following bLVR are related to microscopic changes in mechanical force heterogeneity; and (3) both techniques improve aspects of survival and quality of life influenced by lung compliance, albeit while accelerating disease progression. Our model predictions yield unique insights into the microscopic origins underlying emphysema progression before and after lung volume reduction.

Predicting Structure-Function Relations and Survival following Surgical and Bronchoscopic Lung Volume Reduction Treatment of Emphysema

PubMed Central

Mondoñedo, Jarred R.

2017-01-01

Lung volume reduction surgery (LVRS) and bronchoscopic lung volume reduction (bLVR) are palliative treatments aimed at reducing hyperinflation in advanced emphysema. Previous work has evaluated functional improvements and survival advantage for these techniques, although their effects on the micromechanical environment in the lung have yet to be determined. Here, we introduce a computational model to simulate a force-based destruction of elastic networks representing emphysema progression, which we use to track the response to lung volume reduction via LVRS and bLVR. We find that (1) LVRS efficacy can be predicted based on pre-surgical network structure; (2) macroscopic functional improvements following bLVR are related to microscopic changes in mechanical force heterogeneity; and (3) both techniques improve aspects of survival and quality of life influenced by lung compliance, albeit while accelerating disease progression. Our model predictions yield unique insights into the microscopic origins underlying emphysema progression before and after lung volume reduction. PMID:28182686

From bad pharma to good pharma: aligning market forces with good and trustworthy practices through accreditation, certification, and rating.

PubMed

Miller, Jennifer E

2013-01-01

This article explores whether the bioethical performance and trustworthiness of pharmaceutical companies can be improved by harnessing market forces through the use of accreditation, certification, or rating. Other industries have used such systems to define best practices, set standards, and assess and signal the quality of services, processes, and products. These systems have also informed decisions in other industries about where to invest, what to buy, where to work, and when to regulate. Similarly, accreditation, certification, and rating programs can help drug companies address stakeholder concerns in four areas: clinical trial design and management, dissemination of clinical trial results, marketing practices, and the accessibility of medicines. To illuminate processes - such as conflicts of interests and revolving-door policies - that can jeopardize the integrity of accreditation, certification, and ratings systems, the article concludes with a consideration of recent failures of credit-rating agencies and a review of the regulatory capture literature. © 2013 American Society of Law, Medicine & Ethics, Inc.

Assessment of the relationship between physical working conditions and different levels of work ability.

PubMed

Attarchi, Mirsaeed; Ghaffari, Mostafa; Abdi, Alireza; Mirzamohammadi, Elham; Seyedmehdi, Seyed Mohammad; Rahimpour, Farzaneh; Fazlalizadeh, Maryam; Mohammadi, Saber

2014-04-20

Early leaving of workplace by work forces is one of the fundamental problems worldwide. Maintenance and enhancement of employees work ability are important for raising productivity. This study investigated the relationship between work ability index and physical working conditions and was carried out in 2013 on 641 workers at a manufacturing plant in Tehran. Work ability was assessed by the questionnaire of work ability index and the participants were classified into four work ability groups of poor, moderate, good, and excellent. Physical working conditions were evaluated by the MUSIC-Norrtalje questionnaire and the participants were classified into two groups with proper and poor physical working conditions. The mean score of work ability questionnaire was 42.40; and 2.5% (16 persons), 9.2% (59 persons), 38.2% (245 persons), and 50.1% (321 persons) of the participants were in poor, moderate, good, and excellent work ability groups, respectively. The mean score of physical working conditions questionnaire was 20.06. The results of logistic regression analysis showed that even after adjusting the confounding variables, a significant correlation existed between work ability and physical working conditions (p < 0.05). According to the results of this study, there may be a correlation between physical working conditions such as awkward postures, repetitive movements, load lifting, exposure to whole body vibration and so on with work ability. Therefore it seems that enhancement of the quality of physical working conditions may increase work ability.

Assessment of the Relationship between Physical Working Conditions and Different Levels of Work Ability

PubMed Central

Attarchi, Mirsaeed; Ghaffari, Mostafa; Abdi, Alireza; Mirzamohammadi, Elham; Seyedmehdi, Seyed Mohammad; Rahimpour, Farzaneh; Fazlalizadeh, Maryam; Mohammadi, Saber

2014-01-01

Early leaving of workplace by work forces is one of the fundamental problems worldwide. Maintenance and enhancement of employees work ability are important for raising productivity. This study investigated the relationship between work ability index and physical working conditions and was carried out in 2013 on 641 workers at a manufacturing plant in Tehran. Work ability was assessed by the questionnaire of work ability index and the participants were classified into four work ability groups of poor, moderate, good, and excellent. Physical working conditions were evaluated by the MUSIC-Norrtalje questionnaire and the participants were classified into two groups with proper and poor physical working conditions. The mean score of work ability questionnaire was 42.40; and 2.5% (16 persons), 9.2% (59 persons), 38.2% (245 persons), and 50.1% (321 persons) of the participants were in poor, moderate, good, and excellent work ability groups, respectively. The mean score of physical working conditions questionnaire was 20.06. The results of logistic regression analysis showed that even after adjusting the confounding variables, a significant correlation existed between work ability and physical working conditions (p<0.05). According to the results of this study, there may be a correlation between physical working conditions such as awkward postures, repetitive movements, load lifting, exposure to whole body vibration and so on with work ability. Therefore it seems that enhancement of the quality of physical working conditions may increase work ability. PMID:24999133

Factors controlling particle number concentration and size at metro stations

NASA Astrophysics Data System (ADS)

Reche, C.; Moreno, T.; Martins, V.; Minguillón, M. C.; Jones, T.; de Miguel, E.; Capdevila, M.; Centelles, S.; Querol, X.

2017-05-01

An extensive air quality campaign was performed at differently designed station platforms in the Barcelona metro system, aiming to investigate the factors governing airborne particle number (N) concentrations and their size distributions. The study of the daily trends of N concentrations by different size ranges shows that concentrations of N0.3-10 are closely related with the schedule of the metro service. Conversely, the hourly variation of N0.007-10 (mainly composed of ultrafine particles) could be partly governed by the entrance of particles from outdoor emissions through mechanical ventilation. Measurements under different ventilation settings at three metro platforms reveal that the effect on air quality linked to changes in the tunnel ventilation depends on the station design. Night-time maintenance works in tunnels are frequent activities in the metro system; and after intense prolonged works, these can result in higher N concentrations at platforms during the following metro operating hours (by up to 30%), this being especially evident for N1-10. Due to the complex mixture of factors controlling N, together with the differences in trends recorded for particles within different size ranges, developing an air quality strategy at metro systems is a great challenge. When compared to street-level urban particles concentrations, the priority in metro air quality should be dealing with particles coarser than 0.3 μm. In fact, the results suggest that at narrow platforms served by single-track tunnels the current forced tunnel ventilation during operating hours is less efficient in reducing coarse particles compared to fine.

Women and Work.

ERIC Educational Resources Information Center

Butler, Margaret; Swanson, Linda

1985-01-01

Examines changes in female labor force participation since 1950. Finds little difference currently between metro and nonmetro areas in propensity of women to work outside the home. Traces racial and age differences in labor force participation. Finds family situation and changing social expectations responsible for increase in working women. (LFL)

48 CFR 970.2270 - Unemployment compensation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... the negotiation and administration of cost-reimbursement type contracts, that economical and practical... work force stability and the general outlook with respect to future work force stability; (v) In a...

Changes in the quality of superchilled rabbit meat stored at different temperatures.

PubMed

Lan, Yang; Shang, Yongbiao; Song, Ying; Dong, Quan

2016-07-01

This work studied the effects of a superchilling process at two different temperatures on the shelf life and selected quality parameters of rabbit meat. As the storage time increased, the rates at which the total aerobic count, total volatile basic nitrogen, thiobarbituric acid-reactive substances and pH value increased were significantly lower in superchilled rabbit meat stored at -4°C compared to those in rabbit meat stored at -2.5°C and 4°C. SDS-PAGE analysis indicated that the decrease in storage temperature could significantly reduce the degree of protein degradation. The lightness, redness, shear force, the integrity of muscle microstructure and water holding capacity decreased with increasing storage time. Compared with the samples frozen at -18°C, superchilled rabbit meat shows a marked reduction in microstructure deterioration. These results suggest that shelf life of good-quality rabbit meat was 20d under superchilling at -2.5°C and at least 36d under superchilling at -4°C, compared with less than 6d under traditional chilled storage. Copyright © 2016 Elsevier Ltd. All rights reserved.

American pain society recommendations for improving the quality of acute and cancer pain management: American Pain Society Quality of Care Task Force.

PubMed

Gordon, Debra B; Dahl, June L; Miaskowski, Christine; McCarberg, Bill; Todd, Knox H; Paice, Judith A; Lipman, Arthur G; Bookbinder, Marilyn; Sanders, Steve H; Turk, Dennis C; Carr, Daniel B

2005-07-25

The American Pain Society (APS) set out to revise and expand its 1995 Quality Improvement Guidelines for the Treatment of Acute Pain and Cancer Pain and to facilitate improvements in the quality of pain management in all care settings. Eleven multidisciplinary members of the APS with expertise in quality improvement or measurement participated in the update. Five experts from organizations that focus on health care quality reviewed the final recommendations. MEDLINE and Cumulative Index to Nursing and Allied Health Literature databases were searched (1994-2004) to identify articles on pain quality measurement and quality improvement published after the development of the 1995 guidelines. The APS task force revised and expanded recommendations on the basis of the systematic review of published studies. The more than 3000 members of the APS were invited to provide input, and the 5 experts provided additional comments. The task force synthesized reviewers' comments into the final set of recommendations. The recommendations specify that all care settings formulate structured, multilevel systems approaches (sensitive to the type of pain, population served, and setting of care) that ensure prompt recognition and treatment of pain, involvement of patients and families in the pain management plan, improved treatment patterns, regular reassessment and adjustment of the pain management plan as needed, and measurement of processes and outcomes of pain management. Efforts to improve the quality of pain management must move beyond assessment and communication of pain to implementation and evaluation of improvements in pain treatment that are timely, safe, evidence based, and multimodal.

Interior view to the south of computer work stations in ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Interior view to the south of computer work stations in front of elevated work area 1570 on left and elevated glassed in work area 1870 on right - Over-the-Horizon Backscatter Radar Network, Mountain Home Air Force Operations Building, On Desert Street at 9th Avenue Mountain Home Air Force Base, Mountain Home, Elmore County, ID

[Implementation of a new electronic patient record in surgery].

PubMed

Eggli, S; Holm, J

2001-12-01

The increasing amount of clinical data, intensified interest of patients in medical information, medical quality management and the recent cost explosion in health care systems have forced medical institutions to improve their strategy in handling medical data. In the orthopedic department (3,600 surgeries, 75 beds, 14,000 consultations) software application for comprehensive patient data management has been developed. When implementing the electronic patient history following criteria were evaluated: 1. software evaluation, 2. implementation, 3. work flow, 4. data security/system stability. In the first phase the functional character was defined. Implementation required 3 months after parametrization. The expense amounted to 130,000 DM (30 clients). The training requirements were one afternoon for the secretaries and a 2-h session for the residents. The access speed on medically relevant data averaged under 3 s. The average saving in working hours was approximately 5 h/week for the secretaries and 4 h/week for the residents. The saving in paper amounted to 36,000 sheets/year. In 3 operational years there were 3 server breakdowns. Evaluation of the saving on working hours showed that such a system can amortize within a year. The latest improvements in hardware and software technology made the electronic medical record with integrated quality-control practicable without massive expenditure. The system supplies an extensive platform of information for patient treatment and an instrument to evaluate the efficiency of therapy strategies independent of the clinical field.

Teleoperator comfort and psychometric stability: Criteria for limiting master-controller forces of operation and feedback during telemanipulation

NASA Technical Reports Server (NTRS)

Wiker, Steven F.; Hershkowitz, Elaine; Zik, John

1989-01-01

The following question is addressed: How much force should operators exert, or experience, when operating a telemanipulator master-controller for sustained periods without encountering significant fatigue and discomfort, and without loss of stability in psychometric perception of force. The need to minimize exertion demands to avoid fatigue is diametrically opposed by the need to present a wide range of force stimuli to enhance perception of applied or reflected forces. For 104 minutes subjects repetitiously performed a series of 15 s isometric pinch grasps; controlled at 5, 15, and 25 percent of their maximum voluntary strength. Cyclic pinch grasps were separated by rest intervals of 7.5 and 15 s. Upon completion of every 10 minute period, subjects interrupted grasping activities to gage the intensity of fatigue and discomfort in the hand and forearm using a cross-modal matching technique. A series of psychometric tests were then conducted to determine accuracy and stability in the subject's perception of force experienced. Results showed that onset of sensations of discomfort and fatigue were dependent upon the magnitude of grasp force, work/rest ratio, and progression of task. Declines in force magnitude estimation slopes, indicating a reduction in force perception sensitivity, occurred with increased grasp force when work/rest ratios were greater than 1.0. Specific recommendations for avoiding discomfort and shifts in force perception, by limiting pinch grasp force required for master-controller operation and range of force reflection or work/rest ratios, are provided.

A Retrospective Analysis of Initial Posterior Root Canal Therapy on United States Air Force Personnel

DTIC Science & Technology

2016-06-01

and John Yaccino, DDS Abstract Introduction: The Air Force Dental Service (AFDS) has established evidence-based treatment standards for endodontics...and cuspal coverage restorations (4-6). With this research, the Air Force Dental Service (AFDS) established evidence-based treatment standards for...endodontics to ensure Airmen receive high-quality, safe dental care (7). These standards are taught at the two Air Force (AF) Postgraduate Endodontic

Service Quality in Higher Education Using an Enhanced SERVQUAL Approach

ERIC Educational Resources Information Center

Tan, Kay C.; Kek, Sei W.

2004-01-01

Customer service and quality are driving forces in the business community. As higher educational institutions tussle for competitive advantage and high service quality, the evaluation of educational service quality is essential to provide motivation for and to give feedback on the effectiveness of educational plans and implementation. This…

Non-weight bearing-induced muscle weakness: the role of myosin quantity and quality in MHC type II fibers.

PubMed

Kim, Jong-Hee; Thompson, LaDora V

2014-07-15

We tested the hypothesis that non-weight bearing-induced muscle weakness (i.e., specific force) results from decreases in myosin protein quantity (i.e., myosin content per half-sarcomere and the ratio of myosin to actin) and quality (i.e., force per half-sarcomere and population of myosin heads in the strong-binding state during muscle contraction) in single myosin heavy chain (MHC) type II fibers. Fisher-344 rats were assigned to weight-bearing control (Con) or non-weight bearing (NWB). The NWB rats were hindlimb unloaded for 2 wk. Diameter, force, and MHC content were determined in permeabilized single fibers from the semimembranosus muscle. MHC isoform and the ratio of MHC to actin in each fiber were determined by gel electrophoresis and silver staining techniques. The structural distribution of myosin from spin-labeled fiber bundles during maximal isometric contraction was evaluated using electron paramagnetic resonance spectroscopy. Specific force (peak force per cross-sectional area) in MHC type IIB and IIXB fibers from NWB was significantly reduced by 38% and 18%, respectively. MHC content per half-sarcomere was significantly reduced by 21%. Two weeks of hindlimb unloading resulted in a reduced force per half-sarcomere of 52% and fraction of myosin strong-binding during contraction of 34%. The results suggest that reduced myosin and actin content (quantity) and myosin quality concomitantly contribute to non-weight bearing-related muscle weakness. Copyright © 2014 the American Physiological Society.

Lifelong Learning NCES Task Force: Final Report, Volume I. Working Paper Series.

ERIC Educational Resources Information Center

Binkley, Marilyn; Hudson, Lisa; Knepper, Paula; Kolstad, Andy; Stowe, Peter; Wirt, John

In September 1998, the National Center for Education Statistics (NCES) established a 1-year task force to review the NCES's role concerning lifelong learning. The eight-member task force established a working definition of lifelong learning ("a process or system through which individuals are able and willing to learn at all stages of life,…

Extrinsic Motivation as Correlates of Work Attitude of the Nigerian Police Force: Implications for Counselling

ERIC Educational Resources Information Center

Igun, Sylvester Nosakhare

2008-01-01

The study examined Extrinsic motivation as correlates of work attitude of the Nigeria Police Force and its implications for counselling. 300 Police personnel were selected by random sampling technique from six departments that make up police force Headquarters, Abuja. The personnel were selected from each department using simple sampling…

Exploring Work and Development Options to Reduce Early Labour Force Exit of Mature Aged Australians

ERIC Educational Resources Information Center

Pillay, Hitendra; Kelly, Kathy; Tones, Megan

2008-01-01

Early labour force exit is a significant challenge associated with the ageing workforce in Australia and many other developed countries. A reduction and increased flexibility of work hours has been suggested to improve labour force participation of the mature aged cohort. However, little is known about mature aged workers' aspirations for…

Workforce 2000. A Bibliography.

ERIC Educational Resources Information Center

Florida State Univ., Tallahassee. Center for Instructional Development and Services.

This bibliography contains citations locating information about the future U.S. work force. Because of demographic, economic, and technological developments, significant changes are predicted in both the nature of work and the composition of the work force by the year 2000. Projections, viewpoints, and suggested responses to these changes from…

GLIMPSE: A decision support tool for simultaneously achieving our air quality management and climate change mitigation goals

NASA Astrophysics Data System (ADS)

Pinder, R. W.; Akhtar, F.; Loughlin, D. H.; Henze, D. K.; Bowman, K. W.

2012-12-01

Poor air quality, ecosystem damages, and climate change all are caused by the combustion of fossil fuels, yet environmental management often addresses each of these challenges separately. This can lead to sub-optimal strategies and unintended consequences. Here we present GLIMPSE -- a decision support tool for simultaneously achieving our air quality and climate change mitigation goals. GLIMPSE comprises of two types of models, (i) the adjoint of the GEOS-Chem chemical transport model, to calculate the relationship between emissions and impacts at high spatial resolution, and (ii) the MARKAL energy system model, to calculate the relationship between energy technologies and emissions. This presentation will demonstrate how GLIMPSE can be used to explore energy scenarios to better achieve both improved air quality and mitigate climate change. Second, this presentation will discuss how space-based observations can be incorporated into GLIMPSE to improve decision-making. NASA satellite products, namely ozone radiative forcing from the Tropospheric Emission Spectrometer (TES), are used to extend GLIMPSE to include the impact of emissions on ozone radiative forcing. This provides a much needed observational constraint on ozone radiative forcing.

What is the prevalence of and associations with forced labour experiences among male migrants from Dolakha, Nepal? Findings from a cross-sectional study of returnee migrants.

PubMed

Mak, Joelle; Abramsky, Tanya; Sijapati, Bandita; Kiss, Ligia; Zimmerman, Cathy

2017-08-11

Growing numbers of people are migrating outside their country for work, and many experience precarious conditions, which have been linked to poor physical and mental health. While international dialogue on human trafficking, forced labour and slavery increases, prevalence data of such experiences remain limited. Men from Dolakha, Nepal, who had ever migrated outside of Nepal for work were interviewed on their experiences, from predeparture to return (n=194). Forced labour was assessed among those who returned within the past 10 years (n=140) using the International Labour Organization's forced labour dimensions: (1) unfree recruitment ; (2) work and life under duress ; and (3) impossibility to leave employer . Forced labour is positive if any one of the dimensions is positive. Participants had worked in India (34%), Malaysia (34%) and the Gulf Cooperation Council countries (29%), working in factories (29%), as labourers/porters (15%) or in skilled employment (12%). Among more recent returnees (n=140), 44% experienced unfree recruitment , 71% work and life under duress and 14% impossibility to leave employer . Overall, 73% experienced forced labour during their most recent labour migration.Forced labour was more prevalent among those who had taken loans for their migration (PR 1.23) and slightly less prevalent among those who had migrated more than once (PR 0.87); however the proportion of those who experienced forced labour was still high (67%). Age, destination and duration of stay were associated with only certain dimensions of forced labour. Forced labour experiences were common during recruitment and at destination. Migrant workers need better advice on assessing agencies and brokers, and on accessing services at destinations. As labour migration from Nepal is not likely to reduce in the near future, interventions and policies at both source and destinations need to better address the challenges migrants face so they can achieve safer outcomes. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Service Quality in Higher Education--A Case Study of Universiti Brunei Darussalam

ERIC Educational Resources Information Center

Alani, Farooq; Yaqoub, Yasir; Hamdan, Mahani

2015-01-01

No one doubts the value and importance of quality education, and quality assurance is one major driving force to achieve this. Measuring the performance of service quality of education services of Universiti Brunei Darussalam (UBD), as part of the quality assessment, was assessed based on Parasuraman's five Servqual dimensions. The assessment was…

Satisloh centering technology developments past to present

NASA Astrophysics Data System (ADS)

Leitz, Ernst Michael; Moos, Steffen

2015-10-01

The centering of an optical lens is the grinding of its edge profile or contour in relationship to its optical axis. This is required to ensure that the lens vertex and radial centers are accurately positioned within an optical system. Centering influences the imaging performance and contrast of an optical system. Historically, lens centering has been a purely manual process. Along its 62 years of assembling centering machines, Satisloh introduced several technological milestones to improve the accuracy and quality of this process. During this time more than 2.500 centering machines were assembled. The development went from bell clamping and diamond grinding to Laser alignment, exchange chuckor -spindle systems, to multi axis CNC machines with integrated metrology and automatic loading systems. With the new centering machine C300, several improvements for the clamping and grinding process were introduced. These improvements include a user friendly software to support the operator, a coolant manifold and "force grinding" technology to ensure excellent grinding quality and process stability. They also include an air bearing directly driven centering spindle to provide a large working range of lenses made of all optical materials and diameters from below 10 mm to 300 mm. The clamping force can be programmed between 7 N and 1200 N to safely center lenses made of delicate materials. The smaller C50 centering machine for lenses below 50 mm diameter is available with an optional CNC loading system for automated production.

Quantum information processing using quasiclassical electromagnetic interactions between qubits and electrical resonators

NASA Astrophysics Data System (ADS)

Kerman, Andrew

2013-03-01

Electrical resonators are widely used in quantum information processing with any qubits that are manipulated via electromagnetic interactions. In most cases they are engineered to interact with qubits via real or virtual exchange of (typically microwave) photons, and the resonator must therefore have both a high quality factor and strong quantum fluctuations, corresponding to the strong-coupling limit of cavity QED. Although great strides in the control of quantum information have been made using this so-called ``circuit QED'' architecture, it also comes with some important disadvantages. In this talk, we discuss a new paradigm for coupling qubits electromagnetically via resonators, in which the qubits do not exchange photons with the resonator, but instead exert quasi-classical, effective ``forces'' on it. We show how this type of interaction is similar to that induced between the internal state of a trapped atomic ion and its center-of-mass motion by the photon recoil momentum, and that the resulting entangling operations are insensitive both to the state of the resonator and to its quality factor. The methods we describe are applicable to a variety of qubit-resonator systems, including superconducting and semiconducting solid-state qubits, and trapped molecular ions. This work is sponsored by the ASDR&E under Air Force Contract #FA8721-05-C-0002. Opinions, interpretations, recommendations and conclusions are those of the authors and are not necessarily endorsed by the United States Government.

A Phenomenological Model and Validation of Shortening Induced Force Depression during Muscle Contractions

PubMed Central

McGowan, C.P.; Neptune, R.R.; Herzog, W.

2009-01-01

History dependent effects on muscle force development following active changes in length have been measured in a number of experimental studies. However, few muscle models have included these properties or examined their impact on force and power output in dynamic cyclic movements. The goal of this study was to develop and validate a modified Hill-type muscle model that includes shortening induced force depression and assess its influence on locomotor performance. The magnitude of force depression was defined by empirical relationships based on muscle mechanical work. To validate the model, simulations incorporating force depression were developed to emulate single muscle in situ and whole muscle group leg extension experiments. There was excellent agreement between simulation and experimental values, with in situ force patterns closely matching the experimental data (average RMS error < 1.5 N) and force depression in the simulated leg extension exercise being similar in magnitude to experimental values (6.0% vs 6.5%, respectively). To examine the influence of force depression on locomotor performance, simulations of maximum power pedaling with and without force depression were generated. Force depression decreased maximum crank power by 20% – 40%, depending on the relationship between force depression and muscle work used. These results indicate that force depression has the potential to substantially influence muscle power output in dynamic cyclic movements. However, to fully understand the impact of this phenomenon on human movement, more research is needed to characterize the relationship between force depression and mechanical work in large muscles with different morphologies. PMID:19879585

Work/Family Conflicts: Policy Implications.

ERIC Educational Resources Information Center

Baker, Maureen

In the past 20 years, the percentage of married women in the Canadian labor force has risen dramatically. Despite women's increased participation in the labor force, child care and housework are still largely done by women. While the difficulty of combining work and family responsibilities can result in work/family conflicts, a variety of…

77 FR 25150 - GPS Satellite Simulator Working Group; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-27

...-1600 (Pacific Standard Time). This meeting notice is to inform the public that the Global Positioning... DEPARTMENT OF DEFENSE Department of the Air Force GPS Satellite Simulator Working Group; Notice of Meeting AGENCY: The United States Air Force, DoD. ACTION: Amending GPS Simulator Working group Meeting...

77 FR 70421 - GPS Satellite Simulator Control Working Group Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-26

... DEPARTMENT OF DEFENSE Department of the Air Force GPS Satellite Simulator Control Working Group Meeting AGENCY: Space and Missile Systems Center, Global Positioning Systems (GPS) Directorate, Department... Control Working Group (SSCWG) meeting on 14 December 2012 from 0900-1600 PST at Los Angeles Air Force Base...

78 FR 63459 - GPS Satellite Simulator Control Working Group Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-24

... DEPARTMENT OF DEFENSE Air Force GPS Satellite Simulator Control Working Group Meeting AGENCY... and DoD contractors, that the GPS Directorate will host a GPS Satellite Simulator Control Working Group (SSCWG) meeting on 1 November 2013 from 0900-1300 PST at Los Angeles Air Force Base. The purpose...

Evaluating Statistical Process Control (SPC) techniques and computing the uncertainty of force calibrations

NASA Technical Reports Server (NTRS)

Navard, Sharon E.

1989-01-01

In recent years there has been a push within NASA to use statistical techniques to improve the quality of production. Two areas where statistics are used are in establishing product and process quality control of flight hardware and in evaluating the uncertainty of calibration of instruments. The Flight Systems Quality Engineering branch is responsible for developing and assuring the quality of all flight hardware; the statistical process control methods employed are reviewed and evaluated. The Measurement Standards and Calibration Laboratory performs the calibration of all instruments used on-site at JSC as well as those used by all off-site contractors. These calibrations must be performed in such a way as to be traceable to national standards maintained by the National Institute of Standards and Technology, and they must meet a four-to-one ratio of the instrument specifications to calibrating standard uncertainty. In some instances this ratio is not met, and in these cases it is desirable to compute the exact uncertainty of the calibration and determine ways of reducing it. A particular example where this problem is encountered is with a machine which does automatic calibrations of force. The process of force calibration using the United Force Machine is described in detail. The sources of error are identified and quantified when possible. Suggestions for improvement are made.

Navy Information Dominance, the Battle of Midway, and the Joint Force Commander: It Worked Then, It Needs to Work Now

DTIC Science & Technology

2013-05-19

cyberspace, is putting increased emphasis on the need for the Joint Force Commander to employ his force to achieve Information Dominance . The information... Information Dominance is to assist in achieving Decision Superiority, Assured Command and Control, Battlespace Awareness, and Integrated Fires. Navy... Information Dominance aims to use information in cyberspace as a way and means in warfare -- as a battery in the Joint Force Commander’s arsenal. The

78 FR 57161 - Meeting of the Community Preventive Services Task Force

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-17

..., and policies that increase healthy longevity, save lives and dollars and improve Americans' quality of life. During this meeting, the Task Force will consider the findings of systematic reviews on existing...

Jeopardy not bonus status for African American women in the work force: why does the myth of advantage persist?

PubMed

Sanchez-Hucles, J V

1997-10-01

African American women in the United States have a long history of employment outside of their homes. Their experiences are unique from other groups of majority and minority men and women due to the interaction of race, gender, and class. Despite long-standing and continuing struggles against discrimination, harassment, low pay, tokenism, and stereotypes, a myth that African American women enjoy a bonus or advantaged status in the work force has developed and persisted. In this article, Black women's work force experiences are examined from a social constructionist framework, misperceptions of Black women are critiqued, explanations are developed that explain the unique status of African American women and recommendations are proposed to eradicate the discrimination and marginal status that Black women have endured in the work force.

Report on Financing the New Model of Family Medicine

PubMed Central

Spann, Stephen J.

2004-01-01

PURPOSE To foster redesigning the work and workplaces of family physicians, this Future of Family Medicine task force was created to formulate and recommend a financial model that sustains and promotes a thriving New Model of care by focusing on practice reimbursement and health care finances. The goals of the task force were to develop a financial model that assesses the impact of the New Model on practice finances, and to recommend health care financial policies that, if implemented, would be expected to promote the New Model and the primary medical care function in the United States for the next few decades. METHODS The members of the task force reflected a wide range of professional backgrounds and expertise. The group met in person on 2 occasions and communicated by e-mail and conference calls to achieve consensus. A marketing study was carried out using focus groups to test the concept of the New Model with consumers. External consultants with expertise in health economics, health care finance, health policy, and practice management were engaged to assist the task force with developing the microeconomic (practice level) and macroeconomic (societal level) financial models necessary to achieve its goals. Model assumptions were derived from the published medical literature, existing practice management databases, and discussions with experienced physicians and other content experts. The results of the financial modeling exercise are included in this report. The initial draft report of the findings and recommendations was shared with a reactor panel representing a broad spectrum of constituencies. Feedback from these individuals was reviewed and incorporated, as appropriate, into the final report. RESULTS The practice-level financial model suggests that full implementation of the New Model of care within the current fee-for-service system of reimbursement would result in a 26% increase in compensation (from $167,457 to $210,288 total annual compensation) for prototypical family physicians who maintain their current number of work hours. Alternatively, physicians could choose to decrease their work hours by 12% and maintain their current compensation. This result is sensitive to physician practice group size. The societal level financial model shows that modifications in the current reimbursement system could lead to further improvements in compensation for family physicians practicing the New Model of care. Reimbursement for e-visits and chronic disease management could further increase total annual compensation to $229,849 for prototypical family physicians maintaining their current number of work hours. The widespread introduction of quality-based physician incentive bonus payments similar to some current programs that have been implemented on a limited basis could further increase total annual compensation up to $254,500. The adoption of a mixed reimbursement model, which would add an annual per-patient fee, a chronic care bonus, and an overall performance bonus to the current reimbursement system, could increase total annual compensation for the prototypical family physician continuing the current number of hours worked to as much as $277,800, a 66% increase above current compensation levels. The cost of transition to the New Model is estimated to range from $23,442 to $90,650 per physician, depending on the assumed magnitude of productivity loss associated with implementing an electronic health record. The financial impact of enhanced use of primary care on the costs of health care in the United States was estimated. If every American used a primary care physician as their usual source of care, health care costs would likely decrease by 5.6%, resulting in national savings of $67 billion dollars per year, with an improvement in the quality of the health care provided. CONCLUSIONS Family physicians could use New Model efficiency to increase compensation or to reduce work time. There are alternative reimbursement methodologies compatible with the New Model that would allow family physicians to share in the health care cost savings achieved as a result of effective and efficient delivery of care. The New Model of care should enhance health care while propelling the US system toward improved performance and results that are satisfying to patients, health care professionals, purchasers, and payers. The New Model needs to be implemented now. Given the recognized need for improvements in the US health care system in the areas of quality, safety, access and costs, there is no reason to delay. PMID:15654084