Sulfur Oxides Risk and Exposure Assessment Planning ...

EPA Pesticide Factsheets

In conducting risk/exposure assessments for the Sulfur Oxides NAAQS review, EPA will first develop a draft Scope and Methods Plan which will describe the proposed scope of the quantitative and qualitative analyses to be performed and the tools/methods that may be employed Provide opportunity for CASAC feedback on EPA's plans for the risk and exposure assessment for the Sulfur Oxides NAAQS review

Exposure Assessment of Livestock Carcass Management ...

EPA Pesticide Factsheets

Report This report describes relative exposures and hazards for different livestock carcass management options in the event of a natural disaster. A quantitative exposure assessment by which livestock carcass management options are ranked relative to one another for a hypothetical site setting, a standardized set of environmental conditions (e.g., meteorology), and following a single set of assumptions about how the carcass management options are designed and implemented. These settings, conditions, and assumptions are not necessarily representative of site-specific carcass management efforts. Therefore, the exposure assessment should not be interpreted as estimating levels of chemical and microbial exposure that can be expected to result from the management options evaluated. The intent of the relative rankings is to support scientifically-based livestock carcass management decisions that consider potential hazards to human health, livestock, and the environment. This exposure assessment also provides information to support choices about mitigation measures to minimize or eliminate specific exposure pathways.

Skin sensitisation quantitative risk assessment (QRA) based on aggregate dermal exposure to methylisothiazolinone in personal care and household cleaning products.

PubMed

Ezendam, J; Bokkers, B G H; Bil, W; Delmaar, J E

2018-02-01

Contact allergy to preservatives is an important public health problem. Ideally, new substances should be evaluated for the risk on skin sensitisation before market entry, for example by using a quantitative risk assessment (QRA) as developed for fragrances. As a proof-of-concept, this QRA was applied to the preservative methylisothiazolinone (MI), a common cause of contact allergy. MI is used in different consumer products, including personal care products (PCPs) and household cleaning products (HCPs). Aggregate exposure to MI in PCPs and HCPs was therefore assessed with the Probabilistic Aggregated Consumer Exposure Model (PACEM). Two exposure scenarios were evaluated: scenario 1 calculated aggregate exposure on actual MI product concentrations before the restricted use in PCPs and scenario 2 calculated aggregate exposure using the restrictions for MI in PCPs. The QRA for MI showed that in scenarios 1 and 2, the proportion of the population at risk for skin sensitisation is 0.7% and 0.5%, respectively. The restricted use of MI in PCPs does not seem very effective in lowering the risk on skin sensitization. To conclude, it is important to consider aggregate exposure from the most important consumer products into consideration in the risk assessment. Copyright © 2018 Elsevier Ltd. All rights reserved.

Quantitation of tr-cinnamaldehyde, safrole and myristicin in cola-flavoured soft drinks to improve the assessment of their dietary exposure.

PubMed

Raffo, Antonio; D'Aloise, Antonio; Magrì, Antonio L; Leclercq, Catherine

2013-09-01

Quantitation of tr-cinnamaldehyde, safrole and myristicin was carried out in 70 samples of cola-flavoured soft drinks purchased in eight European countries with the purpose of assessing the variability in the levels of these substances. Results indicated a limited variability in the content of the three substances: the ratio between the 90th and the 10th percentile concentration amounted to 21, 6 and 13 for tr-cinnamaldehyde, safrole and myristicin, respectively. The uncertainty in the assessment of dietary exposure to these substances due to the variability of their level in cola-flavoured drinks was low. Based on these analytical data and on refined food consumption data, estimates of exposure to safrole associated to cola drink consumption, along with Margin of Exposure (MOE) values, were obtained. For high consumers of cola-flavoured soft drinks in certain age groups, within some European countries, MOE values lower than 10,000 resulted, MOE values of 10,000 or higher having been stated by the EFSA as a quantitative criterion to identify low concern from a public health point of view and low priority for risk management actions. The lowest MOE values, from 1900 to 3000, were observed for children and teen agers in the United Kingdom and Ireland. Copyright © 2013 Elsevier Ltd. All rights reserved.

AN APPROACH TO THE DEVELOPMENT OF MODELS TO QUANTITATIVELY ASSESS THE EFFECTS OF EXPOSURE TO ENVIRONMENTALLY RELEVANT LEVELS OF ENDOCRINE DISRUPTORS

EPA Science Inventory

An approach to the development of quantitative models to assess the effects of exposure to environmentally relevant levels of endocrine disruptors on homeostasis in adults.

Ben-Jonathan N, Cooper RL, Foster P, Hughes CL, Hoyer PB, Klotz D, Kohn M, Lamb DJ, Stancel GM.
<...

Modelling of occupational respirable crystalline silica exposure for quantitative exposure assessment in community-based case-control studies.

PubMed

Peters, Susan; Vermeulen, Roel; Portengen, Lützen; Olsson, Ann; Kendzia, Benjamin; Vincent, Raymond; Savary, Barbara; Lavoué, Jérôme; Cavallo, Domenico; Cattaneo, Andrea; Mirabelli, Dario; Plato, Nils; Fevotte, Joelle; Pesch, Beate; Brüning, Thomas; Straif, Kurt; Kromhout, Hans

2011-11-01

We describe an empirical model for exposure to respirable crystalline silica (RCS) to create a quantitative job-exposure matrix (JEM) for community-based studies. Personal measurements of exposure to RCS from Europe and Canada were obtained for exposure modelling. A mixed-effects model was elaborated, with region/country and job titles as random effect terms. The fixed effect terms included year of measurement, measurement strategy (representative or worst-case), sampling duration (minutes) and a priori exposure intensity rating for each job from an independently developed JEM (none, low, high). 23,640 personal RCS exposure measurements, covering a time period from 1976 to 2009, were available for modelling. The model indicated an overall downward time trend in RCS exposure levels of -6% per year. Exposure levels were higher in the UK and Canada, and lower in Northern Europe and Germany. Worst-case sampling was associated with higher reported exposure levels and an increase in sampling duration was associated with lower reported exposure levels. Highest predicted RCS exposure levels in the reference year (1998) were for chimney bricklayers (geometric mean 0.11 mg m(-3)), monument carvers and other stone cutters and carvers (0.10 mg m(-3)). The resulting model enables us to predict time-, job-, and region/country-specific exposure levels of RCS. These predictions will be used in the SYNERGY study, an ongoing pooled multinational community-based case-control study on lung cancer.

Personal Exposure Monitoring Wearing Protocol Compliance: An Initial Assessment of Quantitative Measurements

EPA Science Inventory

Personal exposure sampling provides the most accurate and representative assessment of exposure to a pollutant, but only if measures are implemented to minimize exposure misclassification and reduce confounders that may cause misinterpretation of the collected data. Poor complian...

Development of quantitative exposure data for a pooled exposure-response analysis of 10 silica cohorts.

PubMed

Mannetje, Andrea 't; Steenland, Kyle; Checkoway, Harvey; Koskela, Riitta-Sisko; Koponen, Matti; Attfield, Michael; Chen, Jingqiong; Hnizdo, Eva; DeKlerk, Nicholas; Dosemeci, Mustafa

2002-08-01

Comprehensive quantitative silica exposure estimates over time, measured in the same units across a number of cohorts, would make possible a pooled exposure-response analysis for lung cancer. Such an analysis would help clarify the continuing controversy regarding whether silica causes lung cancer. Existing quantitative exposure data for 10 silica-exposed cohorts were retrieved from the original investigators. Occupation- and time-specific exposure estimates were either adopted/adapted or developed for each cohort, and converted to milligram per cubic meter (mg/m(3)) respirable crystalline silica. Quantitative exposure assignments were typically based on a large number (thousands) of raw measurements, or otherwise consisted of exposure estimates by experts (for two cohorts). Median exposure level of the cohorts ranged between 0.04 and 0.59 mg/m(3) respirable crystalline silica. Exposure estimates were partially validated via their successful prediction of silicosis in these cohorts. Existing data were successfully adopted or modified to create comparable quantitative exposure estimates over time for 10 silica-exposed cohorts, permitting a pooled exposure-response analysis. The difficulties encountered in deriving common exposure estimates across cohorts are discussed. Copyright 2002 Wiley-Liss, Inc.

Stoffenmanager exposure model: company-specific exposure assessments using a Bayesian methodology.

PubMed

van de Ven, Peter; Fransman, Wouter; Schinkel, Jody; Rubingh, Carina; Warren, Nicholas; Tielemans, Erik

2010-04-01

The web-based tool "Stoffenmanager" was initially developed to assist small- and medium-sized enterprises in the Netherlands to make qualitative risk assessments and to provide advice on control at the workplace. The tool uses a mechanistic model to arrive at a "Stoffenmanager score" for exposure. In a recent study it was shown that variability in exposure measurements given a certain Stoffenmanager score is still substantial. This article discusses an extension to the tool that uses a Bayesian methodology for quantitative workplace/scenario-specific exposure assessment. This methodology allows for real exposure data observed in the company of interest to be combined with the prior estimate (based on the Stoffenmanager model). The output of the tool is a company-specific assessment of exposure levels for a scenario for which data is available. The Bayesian approach provides a transparent way of synthesizing different types of information and is especially preferred in situations where available data is sparse, as is often the case in small- and medium sized-enterprises. Real-world examples as well as simulation studies were used to assess how different parameters such as sample size, difference between prior and data, uncertainty in prior, and variance in the data affect the eventual posterior distribution of a Bayesian exposure assessment.

Integrating Exposure into Chemical Alternatives Assessment ...

EPA Pesticide Factsheets

Most alternatives assessments (AA) published to date are largely hazard-based rankings, and as such may not represent a fully informed consideration of the advantages and disadvantages of possible alternatives. With an assessment goal of identifying an alternative chemical that is more sustainable, other attributes beyond hazard are also important, including exposure, risk, life-cycle impacts, performance, cost, and social responsibility. Building on the 2014 recommendations by the U.S. National Academy of Sciences to improve AA decisions by including comparative exposure assessment, the HESISustainable Chemical Alternatives Technical Committee, which consists of scientists from academia, industry, government, and NGOs, has developed a qualitative comparative exposure approach. Conducting such a comparison can screen for alternatives that are expected to have a higher exposure potential, which could trigger a higher-tiered, more quantitative exposure assessment on the alternatives being considered. This talk will demonstrate an approach for including chemical- and product-related exposure information in a qualitative AA comparison. Starting from existing hazard AAs, a series of four chemical-product application scenarios were examined to test the concept, to understand the effort required, and to determine the value of exposure data in AA decision-making. The group has developed a classification approach for ingredient and product parameters to support compariso

FEASIBILITY OF USING THE MACROACTIVITY APPROACH TO ASSESS CHILDREN'S DERMAL EXPOSURE TO PESTICIDES

EPA Science Inventory

Results derived from an initial assessment of critical exposure pathways for children indicate that dermal contact may result in high residential exposures to pesticides. However, data on children's exposures and activities are insufficient to support quantitative assessments ...

A PROPOSED FRAMEWORK FOR ASSESSING RISK FROM LESS-THAN-LIFETIME EXPOSURES TO CARCINOGENS

EPA Science Inventory

Quantitative cancer risk assessment methods have been developed for daily, lifetime human exposures, but not for exposures that are less than lifetime. Few examples for less-than-Iifetime exposures exist in the published literature. To move cancer risk assessment beyond reliance ...

An integrated environmental modeling framework for performing Quantitative Microbial Risk Assessments

EPA Science Inventory

Standardized methods are often used to assess the likelihood of a human-health effect from exposure to a specified hazard, and inform opinions and decisions about risk management and communication. A Quantitative Microbial Risk Assessment (QMRA) is specifically adapted to detail ...

An integrated environmental modeling framework for performing quantitative microbial risk assessments

USDA-ARS?s Scientific Manuscript database

Standardized methods are often used to assess the likelihood of a human-health effect from exposure to a specified hazard, and inform opinions and decisions about risk management and communication. A Quantitative Microbial Risk Assessment (QMRA) is specifically adapted to detail potential human-heal...

A Method for Semi-quantitative Assessment of Exposure to Pesticides of Applicators and Re-entry Workers: An Application in Three Farming Systems in Ethiopia.

PubMed

Negatu, Beyene; Vermeulen, Roel; Mekonnen, Yalemtshay; Kromhout, Hans

2016-07-01

To develop an inexpensive and easily adaptable semi-quantitative exposure assessment method to characterize exposure to pesticide in applicators and re-entry farmers and farm workers in Ethiopia. Two specific semi-quantitative exposure algorithms for pesticides applicators and re-entry workers were developed and applied to 601 farm workers employed in 3 distinctly different farming systems [small-scale irrigated, large-scale greenhouses (LSGH), and large-scale open (LSO)] in Ethiopia. The algorithm for applicators was based on exposure-modifying factors including application methods, farm layout (open or closed), pesticide mixing conditions, cleaning of spraying equipment, intensity of pesticide application per day, utilization of personal protective equipment (PPE), personal hygienic behavior, annual frequency of application, and duration of employment at the farm. The algorithm for re-entry work was based on an expert-based re-entry exposure intensity score, utilization of PPE, personal hygienic behavior, annual frequency of re-entry work, and duration of employment at the farm. The algorithms allowed estimation of daily, annual and cumulative lifetime exposure for applicators, and re-entry workers by farming system, by gender, and by age group. For all metrics, highest exposures occurred in LSGH for both applicators and female re-entry workers. For male re-entry workers, highest cumulative exposure occurred in LSO farms. Female re-entry workers appeared to be higher exposed on a daily or annual basis than male re-entry workers, but their cumulative exposures were similar due to the fact that on average males had longer tenure. Factors related to intensity of exposure (like application method and farm layout) were indicated as the main driving factors for estimated potential exposure. Use of personal protection, hygienic behavior, and duration of employment in surveyed farm workers contributed less to the contrast in exposure estimates. This study indicated that

Global and Regional Brain Assessment with Quantitative MR Imaging in Patients with Prior Exposure to Linear Gadolinium-based Contrast Agents.

PubMed

Kuno, Hirofumi; Jara, Hernán; Buch, Karen; Qureshi, Muhammad Mustafa; Chapman, Margaret N; Sakai, Osamu

2017-04-01

Purpose To assess the association of global and regional brain relaxation times in patients with prior exposure to linear gadolinium-based contrast agents (GBCAs). Materials and Methods The institutional review board approved this cross-sectional study. Thirty-five patients (nine who had received GBCA gadopentetate dimeglumine injections previously [one to eight times] and 26 patients who did not) who underwent brain magnetic resonance (MR) imaging with a mixed fast spin-echo pulse sequence were assessed. The whole brain was segmented according to white and gray matter by using a dual-clustering algorithm. In addition, regions of interest were measured in the globus pallidus, dentate nucleus, thalamus, and pons. The Mann-Whitney U test was used to assess the difference between groups. Multiple regression analysis was performed to assess the association of T1 and T2 with prior GBCA exposure. Results T1 values of gray matter were significantly shorter for patients with than for patients without prior GBCA exposure (P = .022). T1 of the gray matter of the whole brain (P < .001), globus pallidus (P = .002), dentate nucleus (P = .046), and thalamus (P = .026) and T2 of the whole brain (P = .004), dentate nucleus (P = .023), and thalamus (P = .002) showed a significant correlation with the accumulated dose of previous GBCA administration. There was no significant correlation between T1 and the accumulated dose of previous GBCA injections in the white matter (P = .187). Conclusion Global and regional quantitative assessments of T1 and T2 demonstrated an association with prior GBCA exposure, especially for gray matter structures. The results of this study confirm previous research findings that there is gadolinium deposition in wider distribution throughout the brain. © RSNA, 2016 Online supplemental material is available for this article.

Quantitative microbial risk assessment to estimate the health risk from exposure to noroviruses in polluted surface water in South Africa.

PubMed

Van Abel, Nicole; Mans, Janet; Taylor, Maureen B

2017-10-01

This study assessed the risks posed by noroviruses (NoVs) in surface water used for drinking, domestic, and recreational purposes in South Africa (SA), using a quantitative microbial risk assessment (QMRA) methodology that took a probabilistic approach coupling an exposure assessment with four dose-response models to account for uncertainty. Water samples from three rivers were found to be contaminated with NoV GI (80-1,900 gc/L) and GII (420-9,760 gc/L) leading to risk estimates that were lower for GI than GII. The volume of water consumed and the probabilities of infection were lower for domestic (2.91 × 10 -8 to 5.19 × 10 -1 ) than drinking water exposures (1.04 × 10 -5 to 7.24 × 10 -1 ). The annual probabilities of illness varied depending on the type of recreational water exposure with boating (3.91 × 10 -6 to 5.43 × 10 -1 ) and swimming (6.20 × 10 -6 to 6.42 × 10 -1 ) being slightly greater than playing next to/in the river (5.30 × 10 -7 to 5.48 × 10 -1 ). The QMRA was sensitive to the choice of dose-response model. The risk of NoV infection or illness from contaminated surface water is extremely high in SA, especially for lower socioeconomic individuals, but is similar to reported risks from limited international studies.

Quantitative cancer risk assessment for occupational exposures to asphalt fumes during built-up roofing asphalt (BURA) operations.

PubMed

Rhomberg, Lorenz R; Mayfield, David B; Goodman, Julie E; Butler, Eric L; Nascarella, Marc A; Williams, Daniel R

2015-01-01

The International Agency for Research on Cancer qualitatively characterized occupational exposure to oxidized bitumen emissions during roofing as probably carcinogenic to humans (Group 2A). We examine chemistry, exposure, epidemiology and animal toxicity data to explore quantitative risks for roofing workers applying built-up roofing asphalt (BURA). Epidemiology studies do not consistently report elevated risks, and generally do not have sufficient exposure information or adequately control for confounders, precluding their use for dose-response analysis. Dermal carcinogenicity bioassays using mice report increased tumor incidence with single high doses. In order to quantify potential cancer risks, we develop time-to-tumor model methods [consistent with U.S. Environmental Protection Agency (EPA) dose-response analysis and mixtures guidelines] using the dose-time-response shape of concurrent exposures to benzo[a]pyrene (B[a]P) as concurrent controls (which had several exposure levels) to infer presumed parallel dose-time-response curves for BURA-fume condensate. We compare EPA relative potency factor approaches, based on observed relative potency of BURA to B[a]P in similar experiments, and direct observation of the inferred BURA dose-time-response (scaled to humans) as means for characterizing a dermal unit risk factor. We apply similar approaches to limited data on asphalt-fume inhalation and respiratory cancers in rats. We also develop a method for adjusting potency estimates for asphalts that vary in composition using measured fluorescence. Overall, the various methods indicate that cancer risks to roofers from both dermal and inhalation exposure to BURA are within a range typically deemed acceptable within regulatory frameworks. The approaches developed may be useful in assessing carcinogenic potency of other complex mixtures of polycyclic aromatic compounds.

USE OF MACROACTIVITY APPROACH TO ASSESS DERMAL EXPOSURE

EPA Science Inventory

Currently, data on children's exposures and activities are very limited and insufficient to support quantitative assessments that do not rely heavily on major default assumptions as substitutes for missing information (Cohen Hubal et al. 2000a, b). Cohen Hubal et al. (2000a, b...

Spatially resolved hazard and exposure assessments: an example of lead in soil at Lavrion, Greece.

PubMed

Tristán, E; Demetriades, A; Ramsey, M H; Rosenbaum, M S; Stavrakis, P; Thornton, I; Vassiliades, E; Vergou, K

2000-01-01

Spatially resolved hazard assessment (SRHA) and spatially resolved exposure assessment (SREA) are methodologies that have been devised for assessing child exposure to soil containing environmental pollutants. These are based on either a quantitative or a semiquantitative approach. The feasibility of the methodologies has been demonstrated in a study assessing child exposure to Pb accessible in soil at the town of Lavrion in Greece. Using a quantitative approach, both measured and kriged concentrations of Pb in soil are compared with an "established" statutory threshold value. The probabilistic approach gives a refined classification of the contaminated land, since it takes into consideration the uncertainty in both the actual measurement and estimated kriged values. Two exposure assessment models (i.e., IEUBK and HESP) are used as the basis of the quantitative SREA methodologies. The significant correlation between the blood-Pb predictions, using the IEUBK model, and measured concentrations provides a partial validation of the method, because it allows for the uncertainty in the measurements and the lack of some site-specific measurements. The semiquantitative applications of SRHA and SREA incorporate both qualitative information (e.g., land use and dustiness of waste) and quantitative information (e.g., distance from wastes and distance from industry). The significant correlation between the results of these assessments and the measured blood-Pb levels confirms the robust nature of this approach. Successful application of these methodologies could reduce the cost of the assessment and allow areas to be prioritized for further investigation, remediation, or risk management.

Quantitative plasma biomarker analysis in HDI exposure assessment.

PubMed

Flack, Sheila L; Fent, Kenneth W; Trelles Gaines, Linda G; Thomasen, Jennifer M; Whittaker, Steve; Ball, Louise M; Nylander-French, Leena A

2010-01-01

Quantification of amines in biological samples is important for evaluating occupational exposure to diisocyanates. In this study, we describe the quantification of 1,6-hexamethylene diamine (HDA) levels in hydrolyzed plasma of 46 spray painters applying 1,6-hexamethylene diisocyanate (HDI)-containing paint in vehicle repair shops collected during repeated visits to their workplace and their relationship with dermal and inhalation exposure to HDI monomer. HDA was detected in 76% of plasma samples, as heptafluorobutyryl derivatives, and the range of HDA concentrations was < or =0.02-0.92 microg l(-1). After log-transformation of the data, the correlation between plasma HDA levels and HDI inhalation exposure measured on the same workday was low (N = 108, r = 0.22, P = 0.026) compared with the correlation between plasma HDA levels and inhalation exposure occurring approximately 20 to 60 days before blood collection (N = 29, r = 0.57, P = 0.0014). The correlation between plasma HDA levels and HDI dermal exposure measured on the same workday, although statistically significant, was low (N = 108, r = 0.22, P = 0.040) while the correlation between HDA and dermal exposure occurring approximately 20 to 60 days before blood collection was slightly improved (N = 29, r = 0.36, P = 0.053). We evaluated various workplace factors and controls (i.e. location, personal protective equipment use and paint booth type) as modifiers of plasma HDA levels. Workers using a downdraft-ventilated booth had significantly lower plasma HDA levels relative to semi-downdraft and crossdraft booth types (P = 0.0108); this trend was comparable to HDI inhalation and dermal exposure levels stratified by booth type. These findings indicate that HDA concentration in hydrolyzed plasma may be used as a biomarker of cumulative inhalation and dermal exposure to HDI and for investigating the effectiveness of exposure controls in the workplace.

Quantitative risk assessment of durable glass fibers.

PubMed

Fayerweather, William E; Eastes, Walter; Cereghini, Francesco; Hadley, John G

2002-06-01

This article presents a quantitative risk assessment for the theoretical lifetime cancer risk from the manufacture and use of relatively durable synthetic glass fibers. More specifically, we estimate levels of exposure to respirable fibers or fiberlike structures of E-glass and C-glass that, assuming a working lifetime exposure, pose a theoretical lifetime cancer risk of not more than 1 per 100,000. For comparability with other risk assessments we define these levels as nonsignificant exposures. Nonsignificant exposure levels are estimated from (a) the Institute of Occupational Medicine (IOM) chronic rat inhalation bioassay of durable E-glass microfibers, and (b) the Research Consulting Company (RCC) chronic inhalation bioassay of durable refractory ceramic fibers (RCF). Best estimates of nonsignificant E-glass exposure exceed 0.05-0.13 fibers (or shards) per cubic centimeter (cm3) when calculated from the multistage nonthreshold model. Best estimates of nonsignificant C-glass exposure exceed 0.27-0.6 fibers/cm3. Estimates of nonsignificant exposure increase markedly for E- and C-glass when non-linear models are applied and rapidly exceed 1 fiber/cm3. Controlling durable fiber exposures to an 8-h time-weighted average of 0.05 fibers/cm3 will assure that the additional theoretical lifetime risk from working lifetime exposures to these durable fibers or shards is kept below the 1 per 100,000 level. Measured airborne exposures to respirable, durable glass fibers (or shards) in glass fiber manufacturing and fabrication operations were compared with the nonsignificant exposure estimates described. Sampling results for B-sized respirable E-glass fibers at facilities that manufacture or fabricate small-diameter continuous-filament products, from those that manufacture respirable E-glass shards from PERG (process to efficiently recycle glass), from milled fiber operations, and from respirable C-glass shards from Flakeglass operations indicate very low median exposures of 0

Multiple-Strain Approach and Probabilistic Modeling of Consumer Habits in Quantitative Microbial Risk Assessment: A Quantitative Assessment of Exposure to Staphylococcal Enterotoxin A in Raw Milk.

PubMed

Crotta, Matteo; Rizzi, Rita; Varisco, Giorgio; Daminelli, Paolo; Cunico, Elena Cosciani; Luini, Mario; Graber, Hans Ulrich; Paterlini, Franco; Guitian, Javier

2016-03-01

Quantitative microbial risk assessment (QMRA) models are extensively applied to inform management of a broad range of food safety risks. Inevitably, QMRA modeling involves an element of simplification of the biological process of interest. Two features that are frequently simplified or disregarded are the pathogenicity of multiple strains of a single pathogen and consumer behavior at the household level. In this study, we developed a QMRA model with a multiple-strain approach and a consumer phase module (CPM) based on uncertainty distributions fitted from field data. We modeled exposure to staphylococcal enterotoxin A in raw milk in Lombardy; a specific enterotoxin production module was thus included. The model is adaptable and could be used to assess the risk related to other pathogens in raw milk as well as other staphylococcal enterotoxins. The multiplestrain approach, implemented as a multinomial process, allowed the inclusion of variability and uncertainty with regard to pathogenicity at the bacterial level. Data from 301 questionnaires submitted to raw milk consumers were used to obtain uncertainty distributions for the CPM. The distributions were modeled to be easily updatable with further data or evidence. The sources of uncertainty due to the multiple-strain approach and the CPM were identified, and their impact on the output was assessed by comparing specific scenarios to the baseline. When the distributions reflecting the uncertainty in consumer behavior were fixed to the 95th percentile, the risk of exposure increased up to 160 times. This reflects the importance of taking into consideration the diversity of consumers' habits at the household level and the impact that the lack of knowledge about variables in the CPM can have on the final QMRA estimates. The multiple-strain approach lends itself to use in other food matrices besides raw milk and allows the model to better capture the complexity of the real world and to be capable of geographical

Development of retrospective quantitative and qualitative job-exposure matrices for exposures at a beryllium processing facility.

PubMed

Couch, James R; Petersen, Martin; Rice, Carol; Schubauer-Berigan, Mary K

2011-05-01

To construct a job-exposure matrix (JEM) for an Ohio beryllium processing facility between 1953 and 2006 and to evaluate temporal changes in airborne beryllium exposures. Quantitative area- and breathing-zone-based exposure measurements of airborne beryllium were made between 1953 and 2006 and used by plant personnel to estimate daily weighted average (DWA) exposure concentrations for sampled departments and operations. These DWA measurements were used to create a JEM with 18 exposure metrics, which was linked to the plant cohort consisting of 18,568 unique job, department and year combinations. The exposure metrics ranged from quantitative metrics (annual arithmetic/geometric average DWA exposures, maximum DWA and peak exposures) to descriptive qualitative metrics (chemical beryllium species and physical form) to qualitative assignment of exposure to other risk factors (yes/no). Twelve collapsed job titles with long-term consistent industrial hygiene samples were evaluated using regression analysis for time trends in DWA estimates. Annual arithmetic mean DWA estimates (overall plant-wide exposures including administration, non-production, and production estimates) for the data by decade ranged from a high of 1.39 μg/m(3) in the 1950s to a low of 0.33 μg/m(3) in the 2000s. Of the 12 jobs evaluated for temporal trend, the average arithmetic DWA mean was 2.46 μg/m(3) and the average geometric mean DWA was 1.53 μg/m(3). After the DWA calculations were log-transformed, 11 of the 12 had a statistically significant (p < 0.05) decrease in reported exposure over time. The constructed JEM successfully differentiated beryllium exposures across jobs and over time. This is the only quantitative JEM containing exposure estimates (average and peak) for the entire plant history.

76 FR 58509 - Release of Risk and Exposure Assessment Planning Document for the Review of the National Ambient...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-21

... ISA) provides support for the development of quantitative assessments of risk and exposure for health... conclusions presented in the First Draft ISA provide support for the development of quantitative assessments...

Using integrated environmental modeling to automate a process-based Quantitative Microbial Risk Assessment

EPA Science Inventory

Integrated Environmental Modeling (IEM) organizes multidisciplinary knowledge that explains and predicts environmental-system response to stressors. A Quantitative Microbial Risk Assessment (QMRA) is an approach integrating a range of disparate data (fate/transport, exposure, an...

A quantitative visual dashboard to explore exposures to consumer product ingredients

EPA Science Inventory

The Exposure Prioritization (Ex Priori) model features a simplified, quantitative visual dashboard to explore exposures across chemical space. Diverse data streams are integrated within the interface such that different exposure scenarios for “individual,” “pop...

Exposure assessment in investigations of waterborne illness: a quantitative estimate of measurement error

PubMed Central

Jones, Andria Q; Dewey, Catherine E; Doré, Kathryn; Majowicz, Shannon E; McEwen, Scott A; Waltner-Toews, David

2006-01-01

Background Exposure assessment is typically the greatest weakness of epidemiologic studies of disinfection by-products (DBPs) in drinking water, which largely stems from the difficulty in obtaining accurate data on individual-level water consumption patterns and activity. Thus, surrogate measures for such waterborne exposures are commonly used. Little attention however, has been directed towards formal validation of these measures. Methods We conducted a study in the City of Hamilton, Ontario (Canada) in 2001–2002, to assess the accuracy of two surrogate measures of home water source: (a) urban/rural status as assigned using residential postal codes, and (b) mapping of residential postal codes to municipal water systems within a Geographic Information System (GIS). We then assessed the accuracy of a commonly-used surrogate measure of an individual's actual drinking water source, namely, their home water source. Results The surrogates for home water source provided good classification of residents served by municipal water systems (approximately 98% predictive value), but did not perform well in classifying those served by private water systems (average: 63.5% predictive value). More importantly, we found that home water source was a poor surrogate measure of the individuals' actual drinking water source(s), being associated with high misclassification errors. Conclusion This study demonstrated substantial misclassification errors associated with a surrogate measure commonly used in studies of drinking water disinfection byproducts. Further, the limited accuracy of two surrogate measures of an individual's home water source heeds caution in their use in exposure classification methodology. While these surrogates are inexpensive and convenient, they should not be substituted for direct collection of accurate data pertaining to the subjects' waterborne disease exposure. In instances where such surrogates must be used, estimation of the misclassification and its

Using integrated environmental modeling to automate a process-based Quantitative Microbial Risk Assessment

USDA-ARS?s Scientific Manuscript database

Integrated Environmental Modeling (IEM) organizes multidisciplinary knowledge that explains and predicts environmental-system response to stressors. A Quantitative Microbial Risk Assessment (QMRA) is an approach integrating a range of disparate data (fate/transport, exposure, and human health effect...

Spatial and Temporal Dynamics in Air Pollution Exposure Assessment

PubMed Central

Dias, Daniela; Tchepel, Oxana

2018-01-01

Analyzing individual exposure in urban areas offers several challenges where both the individual’s activities and air pollution levels demonstrate a large degree of spatial and temporal dynamics. This review article discusses the concepts, key elements, current developments in assessing personal exposure to urban air pollution (seventy-two studies reviewed) and respective advantages and disadvantages. A new conceptual structure to organize personal exposure assessment methods is proposed according to two classification criteria: (i) spatial-temporal variations of individuals’ activities (point-fixed or trajectory based) and (ii) characterization of air quality (variable or uniform). This review suggests that the spatial and temporal variability of urban air pollution levels in combination with indoor exposures and individual’s time-activity patterns are key elements of personal exposure assessment. In the literature review, the majority of revised studies (44 studies) indicate that the trajectory based with variable air quality approach provides a promising framework for tackling the important question of inter- and intra-variability of individual exposure. However, future quantitative comparison between the different approaches should be performed, and the selection of the most appropriate approach for exposure quantification should take into account the purpose of the health study. This review provides a structured basis for the intercomparing of different methodologies and to make their advantages and limitations more transparent in addressing specific research objectives. PMID:29558426

Wishful Thinking? Inside the Black Box of Exposure Assessment.

PubMed

Money, Annemarie; Robinson, Christine; Agius, Raymond; de Vocht, Frank

2016-05-01

Decision-making processes used by experts when undertaking occupational exposure assessment are relatively unknown, but it is often assumed that there is a common underlying method that experts employ. However, differences in training and experience of assessors make it unlikely that one general method for expert assessment would exist. Therefore, there are concerns about formalizing, validating, and comparing expert estimates within and between studies that are difficult, if not impossible, to characterize. Heuristics on the other hand (the processes involved in decision making) have been extensively studied. Heuristics are deployed by everyone as short-cuts to make the often complex process of decision-making simpler, quicker, and less burdensome. Experts' assessments are often subject to various simplifying heuristics as a way to reach a decision in the absence of sufficient data. Therefore, investigating the underlying heuristics or decision-making processes involved may help to shed light on the 'black box' of exposure assessment. A mixed method study was conducted utilizing both a web-based exposure assessment exercise incorporating quantitative and semiqualitative elements of data collection, and qualitative semi-structured interviews with exposure assessors. Qualitative data were analyzed using thematic analysis. Twenty-five experts completed the web-based exposure assessment exercise and 8 of these 25 were randomly selected to participate in the follow-up interview. Familiar key themes relating to the exposure assessment exercise emerged; 'intensity'; 'probability'; 'agent'; 'process'; and 'duration' of exposure. However, an important aspect of the detailed follow-up interviews revealed a lack of structure and order with which participants described their decision making. Participants mostly described some form of an iterative process, heavily relying on the anchoring and adjustment heuristic, which differed between experts. In spite of having undertaken

Wishful Thinking? Inside the Black Box of Exposure Assessment

PubMed Central

Money, Annemarie; Robinson, Christine; Agius, Raymond; de Vocht, Frank

2016-01-01

Background: Decision-making processes used by experts when undertaking occupational exposure assessment are relatively unknown, but it is often assumed that there is a common underlying method that experts employ. However, differences in training and experience of assessors make it unlikely that one general method for expert assessment would exist. Therefore, there are concerns about formalizing, validating, and comparing expert estimates within and between studies that are difficult, if not impossible, to characterize. Heuristics on the other hand (the processes involved in decision making) have been extensively studied. Heuristics are deployed by everyone as short-cuts to make the often complex process of decision-making simpler, quicker, and less burdensome. Experts’ assessments are often subject to various simplifying heuristics as a way to reach a decision in the absence of sufficient data. Therefore, investigating the underlying heuristics or decision-making processes involved may help to shed light on the ‘black box’ of exposure assessment. Methods: A mixed method study was conducted utilizing both a web-based exposure assessment exercise incorporating quantitative and semiqualitative elements of data collection, and qualitative semi-structured interviews with exposure assessors. Qualitative data were analyzed using thematic analysis. Results: Twenty-five experts completed the web-based exposure assessment exercise and 8 of these 25 were randomly selected to participate in the follow-up interview. Familiar key themes relating to the exposure assessment exercise emerged; ‘intensity’; ‘probability’; ‘agent’; ‘process’; and ‘duration’ of exposure. However, an important aspect of the detailed follow-up interviews revealed a lack of structure and order with which participants described their decision making. Participants mostly described some form of an iterative process, heavily relying on the anchoring and adjustment heuristic, which

Using Integrated Environmental Modeling to Automate a Process-Based Quantitative Microbial Risk Assessment (presentation)

EPA Science Inventory

Integrated Environmental Modeling (IEM) organizes multidisciplinary knowledge that explains and predicts environmental-system response to stressors. A Quantitative Microbial Risk Assessment (QMRA) is an approach integrating a range of disparate data (fate/transport, exposure, and...

Stakeholder attitudes towards cumulative and aggregate exposure assessment of pesticides.

PubMed

Verbeke, Wim; Van Loo, Ellen J; Vanhonacker, Filiep; Delcour, Ilse; Spanoghe, Pieter; van Klaveren, Jacob D

2015-05-01

This study evaluates the attitudes and perspectives of different stakeholder groups (agricultural producers, pesticide manufacturers, trading companies, retailers, regulators, food safety authorities, scientists and NGOs) towards the concepts of cumulative and aggregate exposure assessment of pesticides by means of qualitative in-depth interviews (n = 15) and a quantitative stakeholder survey (n = 65). The stakeholders involved generally agreed that the use of chemical pesticides is needed, primarily for meeting the need of feeding the growing world population, while clearly acknowledging the problematic nature of human exposure to pesticide residues. Current monitoring was generally perceived to be adequate, but the timeliness and consistency of monitoring practices across countries were questioned. The concept of cumulative exposure assessment was better understood by stakeholders than the concept of aggregate exposure assessment. Identified pitfalls were data availability, data limitations, sources and ways of dealing with uncertainties, as well as information and training needs. Regulators and food safety authorities were perceived as the stakeholder groups for whom cumulative and aggregate pesticide exposure assessment methods and tools would be most useful and acceptable. Insights obtained from this exploratory study have been integrated in the development of targeted and stakeholder-tailored dissemination and training programmes that were implemented within the EU-FP7 project ACROPOLIS. Copyright © 2014 Elsevier Ltd. All rights reserved.

Non-Renal Effects and the Risk Assessment of Environmental Cadmium Exposure

PubMed Central

Barregard, Lars; Bergdahl, Ingvar A.; Nordberg, Gunnar F.; Nordberg, Monica; Skerfving, Staffan

2014-01-01

Background: Exposure to cadmium (Cd) has long been recognized as a health hazard, both in industry and in general populations with high exposure. Under the currently prevailing health risk assessment, the relationship between urinary Cd (U-Cd) concentrations and tubular proteinuria is used. However, doubts have recently been raised regarding the justification of basing the risk assessment on this relationship at very low exposure. Objectives: Our objective was to review available information on health effects of Cd exposure with respect to human health risk assessment. Discussion: The associations between U-Cd and urinary proteins at very low exposure may not be due to Cd toxicity, and the clinical significance of slight proteinuria may also be limited. More importantly, other effects have been reported at very low Cd exposure. There is reason to challenge the basis of the existing health risk assessment for Cd. Our review of the literature found that exposure to low concentrations of Cd is associated with effects on bone, including increased risk of osteoporosis and fractures, and that this observation has implications for the health risk assessment of Cd. Other effects associated with Cd should also be considered, in particular cancer, although the information is still too limited for appropriate use in quantitative risk assessment. Conclusion: Non-renal effects should be considered critical effects in the health risk assessment of Cd. Citation: Åkesson A, Barregard L, Bergdahl IA, Nordberg GF, Nordberg M, Skerfving S. 2014. Non-renal effects and the risk assessment of environmental cadmium exposure. Environ Health Perspect 122:431–438; http://dx.doi.org/10.1289/ehp.1307110 PMID:24569905

Visually observed mold and moldy odor versus quantitatively measured microbial exposure in homes

PubMed Central

Reponen, Tiina; Singh, Umesh; Schaffer, Chris; Vesper, Stephen; Johansson, Elisabet; Adhikari, Atin; Grinshpun, Sergey A.; Indugula, Reshmi; Ryan, Patrick; Levin, Linda; LeMasters, Grace

2010-01-01

The main study objective was to compare different methods for assessing mold exposure in conjunction with an epidemiologic study on the development of children’s asthma. Homes of 184 children were assessed for mold by visual observations and dust sampling at child’s age 1 (Year 1). Similar assessment supplemented with air sampling was conducted in Year 7. Samples were analyzed for endotoxin, (1–3)-β-D-glucan, and fungal spores. The Mold Specific Quantitative Polymerase Chain Reaction assay was used to analyze 36 mold species in dust samples, and the Environmental Relative Moldiness Index (ERMI) was calculated. Homes were categorized based on three criteria: 1) visible mold damage, 2) moldy odor, and 3) ERMI. Even for homes where families had not moved, Year 7 endotoxin and (1–3)-β-D-glucan exposures were significantly higher than those in Year 1 (p<0.001), whereas no difference was seen for ERMI (p=0.78). Microbial concentrations were not consistently associated with visible mold damage categories, but were consistently higher in homes with moldy odor and in homes that had high ERMI. Low correlations between results in air and dust samples indicate different types or durations of potential microbial exposures from dust vs. air. Future analysis will indicate which, if any, of the assessment methods is associated with the development of asthma. PMID:20810150

Genetic toxicology at the crossroads-from qualitative hazard evaluation to quantitative risk assessment.

PubMed

White, Paul A; Johnson, George E

2016-05-01

Applied genetic toxicology is undergoing a transition from qualitative hazard identification to quantitative dose-response analysis and risk assessment. To facilitate this change, the Health and Environmental Sciences Institute (HESI) Genetic Toxicology Technical Committee (GTTC) sponsored a workshop held in Lancaster, UK on July 10-11, 2014. The event included invited speakers from several institutions and the contents was divided into three themes-1: Point-of-departure Metrics for Quantitative Dose-Response Analysis in Genetic Toxicology; 2: Measurement and Estimation of Exposures for Better Extrapolation to Humans and 3: The Use of Quantitative Approaches in Genetic Toxicology for human health risk assessment (HHRA). A host of pertinent issues were discussed relating to the use of in vitro and in vivo dose-response data, the development of methods for in vitro to in vivo extrapolation and approaches to use in vivo dose-response data to determine human exposure limits for regulatory evaluations and decision-making. This Special Issue, which was inspired by the workshop, contains a series of papers that collectively address topics related to the aforementioned themes. The Issue includes contributions that collectively evaluate, describe and discuss in silico, in vitro, in vivo and statistical approaches that are facilitating the shift from qualitative hazard evaluation to quantitative risk assessment. The use and application of the benchmark dose approach was a central theme in many of the workshop presentations and discussions, and the Special Issue includes several contributions that outline novel applications for the analysis and interpretation of genetic toxicity data. Although the contents of the Special Issue constitutes an important step towards the adoption of quantitative methods for regulatory assessment of genetic toxicity, formal acceptance of quantitative methods for HHRA and regulatory decision-making will require consensus regarding the

Considerations in deriving quantitative cancer criteria for inorganic arsenic exposure via inhalation.

PubMed

Lewis, Ari S; Beyer, Leslie A; Zu, Ke

2015-01-01

The inhalation unit risk (IUR) that currently exists in the United States Environmental Protection Agency's (US EPA's) Integrated Risk Information System was developed in 1984 based on studies examining the relationship between respiratory cancer and arsenic exposure in copper smelters from two US locations: the copper smelter in Anaconda, Montana, and the American Smelting And Refining COmpany (ASARCO) smelter in Tacoma, Washington. Since US EPA last conducted its assessment, additional data have become available from epidemiology and mechanistic studies. In addition, the California Air Resources Board, Texas Commission of Environmental Quality, and Dutch Expert Committee on Occupational Safety have all conducted new risk assessments. All three analyses, which calculated IURs based on respiratory/lung cancer mortality, generated IURs that are lower (i.e., less restrictive) than the current US EPA value of 4.3×10(-3) (μg/m(3))(-1). The IURs developed by these agencies, which vary more than 20-fold, are based on somewhat different studies and use different methodologies to address uncertainties in the underlying datasets. Despite these differences, all were developed based on a cumulative exposure metric assuming a low-dose linear dose-response relationship. In this paper, we contrast and compare the analyses conducted by these agencies and critically evaluate strengths and limitations inherent in the data and methodologies used to develop quantitative risk estimates. In addition, we consider how these data could be best used to assess risk at much lower levels of arsenic in air, such as those experienced by the general public. Given that the mode of action for arsenic supports a threshold effect, and epidemiological evidence suggests that the arsenic concentration in air is a reliable predictor of lung/respiratory cancer risk, we developed a quantitative cancer risk analysis using a nonlinear threshold model. Applying a nonlinear model to occupational data, we

Development and Assessment of Modules to Integrate Quantitative Skills in Introductory Biology Courses

PubMed Central

Hoffman, Kathleen; Leupen, Sarah; Dowell, Kathy; Kephart, Kerrie; Leips, Jeff

2016-01-01

Redesigning undergraduate biology courses to integrate quantitative reasoning and skill development is critical to prepare students for careers in modern medicine and scientific research. In this paper, we report on the development, implementation, and assessment of stand-alone modules that integrate quantitative reasoning into introductory biology courses. Modules are designed to improve skills in quantitative numeracy, interpreting data sets using visual tools, and making inferences about biological phenomena using mathematical/statistical models. We also examine demographic/background data that predict student improvement in these skills through exposure to these modules. We carried out pre/postassessment tests across four semesters and used student interviews in one semester to examine how students at different levels approached quantitative problems. We found that students improved in all skills in most semesters, although there was variation in the degree of improvement among skills from semester to semester. One demographic variable, transfer status, stood out as a major predictor of the degree to which students improved (transfer students achieved much lower gains every semester, despite the fact that pretest scores in each focus area were similar between transfer and nontransfer students). We propose that increased exposure to quantitative skill development in biology courses is effective at building competency in quantitative reasoning. PMID:27146161

Assessing framing assumptions in quantitative health impact assessments: a housing intervention example.

PubMed

Mesa-Frias, Marco; Chalabi, Zaid; Foss, Anna M

2013-09-01

Health impact assessment (HIA) is often used to determine ex ante the health impact of an environmental policy or an environmental intervention. Underpinning any HIA is the framing assumption, which defines the causal pathways mapping environmental exposures to health outcomes. The sensitivity of the HIA to the framing assumptions is often ignored. A novel method based on fuzzy cognitive map (FCM) is developed to quantify the framing assumptions in the assessment stage of a HIA, and is then applied to a housing intervention (tightening insulation) as a case-study. Framing assumptions of the case-study were identified through a literature search of Ovid Medline (1948-2011). The FCM approach was used to identify the key variables that have the most influence in a HIA. Changes in air-tightness, ventilation, indoor air quality and mould/humidity have been identified as having the most influence on health. The FCM approach is widely applicable and can be used to inform the formulation of the framing assumptions in any quantitative HIA of environmental interventions. We argue that it is necessary to explore and quantify framing assumptions prior to conducting a detailed quantitative HIA during the assessment stage. Copyright © 2013 Elsevier Ltd. All rights reserved.

Children's exposure assessment: a review of factors influencing Children's exposure, and the data available to characterize and assess that exposure.

PubMed Central

Cohen Hubal, E A; Sheldon, L S; Burke, J M; McCurdy, T R; Berry, M R; Rigas, M L; Zartarian, V G; Freeman, N C

2000-01-01

We review the factors influencing children's exposure to environmental contaminants and the data available to characterize and assess that exposure. Children's activity pattern data requirements are demonstrated in the context of the algorithms used to estimate exposure by inhalation, dermal contact, and ingestion. Currently, data on children's exposures and activities are insufficient to adequately assess multimedia exposures to environmental contaminants. As a result, regulators use a series of default assumptions and exposure factors when conducting exposure assessments. Data to reduce uncertainty in the assumptions and exposure estimates are needed to ensure chemicals are regulated appropriately to protect children's health. To improve the database, advancement in the following general areas of research is required: identification of appropriate age/developmental benchmarks for categorizing children in exposure assessment; development and improvement of methods for monitoring children's exposures and activities; collection of activity pattern data for children (especially young children) required to assess exposure by all routes; collection of data on concentrations of environmental contaminants, biomarkers, and transfer coefficients that can be used as inputs to aggregate exposure models. PMID:10856019

Quantitative risk assessment for skin sensitization: Success or failure?

PubMed

Kimber, Ian; Gerberick, G Frank; Basketter, David A

2017-02-01

Skin sensitization is unique in the world of toxicology. There is a combination of reliable, validated predictive test methods for identification of skin sensitizing chemicals, a clearly documented and transparent approach to risk assessment, and effective feedback from dermatology clinics around the world delivering evidence of the success or failure of the hazard identification/risk assessment/management process. Recent epidemics of contact allergy, particularly to preservatives, have raised questions of whether the safety/risk assessment process is working in an optimal manner (or indeed is working at all!). This review has as its focus skin sensitization quantitative risk assessment (QRA). The core toxicological principles of QRA are reviewed, and evidence of use and misuse examined. What becomes clear is that skin sensitization QRA will only function adequately if two essential criteria are met. The first is that QRA is applied rigourously, and the second is that potential exposure to the sensitizing substance is assessed adequately. This conclusion will come as no surprise to any toxicologist who appreciates the basic premise that "risk = hazard x exposure". Accordingly, use of skin sensitization QRA is encouraged, not least because the essential feedback from dermatology clinics can be used as a tool to refine QRA in situations where this risk assessment tool has not been properly used. Copyright © 2016 Elsevier Inc. All rights reserved.

Quantitative assessment of human exposure to extended spectrum and AmpC β-lactamases bearing E. coli in lettuce attributable to irrigation water and subsequent horizontal gene transfer.

PubMed

Njage, P M K; Buys, E M

2017-01-02

The contribution of the fresh produce production environment to human exposure with bacteria bearing extended spectrum β-lactamases and AmpC β-lactamases (ESBL/AmpC) has not been reported. High prevalence of ESBLs/AmpC bearing E. coli as well as a high gene transfer efficiency of lettuce and irrigation water E. coli isolates was previously reported. This stochastic modeling was aimed at quantitatively assessing human exposure to ESBL/AmpC bearing E. coli through lettuce attributable to irrigation water and subsequent horizontal gene transfer. Modular process risk approach was used for the quantitative exposure assessment and models were constructed in Ms. Excel spreadsheet with farm to consumption chain accounted for by primary production, processing, retail and consumer storage. Probability distributions were utilised to take into account the variability of the exposure estimates. Exposure resulting from ESBL/AmpC positive E. coli and gene transfer was taken into account. Monte Carlo simulation was carried out using @Risk software followed by sensitivity and scenario analysis to assess most effective single or combinations of mitigation strategies for the ESBL/AmpC positive E. coli events from farm to fork. Three percent of South African lettuce consumers are exposed to lettuce contaminated with about 10 6.4 ±10 6.7 (95% CI: 10 5.1 -10 7 ) cfu of ESBL/AmpC positive E. coli per serving. The contribution of originally positive isolates and conjugative genetic transfer was 10 6 ±10 6.7 (95% CI: 10 5 -10 7 ) and 10 5.2 ±10 5.6 (95% CI: 10 3.9 -10 5.8 ) cfu per serving respectively. Proportion of ESBL/AmpC positive E. coli (Spearman's correlation coefficient (ρ)=0.85), conjugative gene transfer (ρ=0.05-0.14), washing in chlorine water (ρ=0.18), further rinsing (ρ=0.15), and prevalence of E. coli in irrigation water (ρ=0.16) had highest influence on consumer exposure. The most effective single methods in reducing consumer exposure were reduction in irrigation

New developments in exposure assessment: the impact on the practice of health risk assessment and epidemiological studies.

PubMed

Nieuwenhuijsen, Mark; Paustenbach, Dennis; Duarte-Davidson, Raquel

2006-12-01

The field of exposure assessment has matured significantly over the past 10-15 years. Dozens of studies have measured the concentrations of numerous chemicals in many media to which humans are exposed. Others have catalogued the various exposure pathways and identified typical values which can be used in the exposure calculations for the general population such as amount of water or soil ingested per day or the percent of a chemical than can pass through the skin. In addition, studies of the duration of exposure for many tasks (e.g. showering, jogging, working in the office) have been conducted which allow for more general descriptions of the likely range of exposures. All of this information, as well as the development of new and better models (e.g. air dispersion or groundwater models), allow for better estimates of exposure. In addition to identifying better exposure factors, and better mathematical models for predicting the aerial distribution of chemicals, the conduct of simulation studies and dose-reconstruction studies can offer extraordinary opportunities for filling in data gaps regarding historical exposures which are critical to improving the power of epidemiology studies. The use of probabilistic techniques such as Monte Carlo analysis and Bayesian statistics have revolutionized the practice of exposure assessment and has greatly enhanced the quality of the risk characterization. Lastly, the field of epidemiology is about to undergo a sea change with respect to the exposure component because each year better environmental and exposure models, statistical techniques and new biological monitoring techniques are being introduced. This paper reviews these techniques and discusses where additional research is likely to pay a significant dividend. Exposure assessment techniques are now available which can significantly improve the quality of epidemiology and health risk assessment studies and vastly improve their usefulness. As more quantitative exposure

Sensitivity analyses of exposure estimates from a quantitative job-exposure matrix (SYN-JEM) for use in community-based studies.

PubMed

Peters, Susan; Kromhout, Hans; Portengen, Lützen; Olsson, Ann; Kendzia, Benjamin; Vincent, Raymond; Savary, Barbara; Lavoué, Jérôme; Cavallo, Domenico; Cattaneo, Andrea; Mirabelli, Dario; Plato, Nils; Fevotte, Joelle; Pesch, Beate; Brüning, Thomas; Straif, Kurt; Vermeulen, Roel

2013-01-01

We describe the elaboration and sensitivity analyses of a quantitative job-exposure matrix (SYN-JEM) for respirable crystalline silica (RCS). The aim was to gain insight into the robustness of the SYN-JEM RCS estimates based on critical decisions taken in the elaboration process. SYN-JEM for RCS exposure consists of three axes (job, region, and year) based on estimates derived from a previously developed statistical model. To elaborate SYN-JEM, several decisions were taken: i.e. the application of (i) a single time trend; (ii) region-specific adjustments in RCS exposure; and (iii) a prior job-specific exposure level (by the semi-quantitative DOM-JEM), with an override of 0 mg/m(3) for jobs a priori defined as non-exposed. Furthermore, we assumed that exposure levels reached a ceiling in 1960 and remained constant prior to this date. We applied SYN-JEM to the occupational histories of subjects from a large international pooled community-based case-control study. Cumulative exposure levels derived with SYN-JEM were compared with those from alternative models, described by Pearson correlation ((Rp)) and differences in unit of exposure (mg/m(3)-year). Alternative models concerned changes in application of job- and region-specific estimates and exposure ceiling, and omitting the a priori exposure ranking. Cumulative exposure levels for the study subjects ranged from 0.01 to 60 mg/m(3)-years, with a median of 1.76 mg/m(3)-years. Exposure levels derived from SYN-JEM and alternative models were overall highly correlated (R(p) > 0.90), although somewhat lower when omitting the region estimate ((Rp) = 0.80) or not taking into account the assigned semi-quantitative exposure level (R(p) = 0.65). Modification of the time trend (i.e. exposure ceiling at 1950 or 1970, or assuming a decline before 1960) caused the largest changes in absolute exposure levels (26-33% difference), but without changing the relative ranking ((Rp) = 0.99). Exposure estimates derived from SYN

The Validity and Applicability of Using a Generic Exposure Assessment Model for Occupational Exposure to Nano-Objects and Their Aggregates and Agglomerates.

PubMed

Bekker, Cindy; Voogd, Eef; Fransman, Wouter; Vermeulen, Roel

2016-11-01

Control banding can be used as a first-tier assessment to control worker exposure to nano-objects and their aggregates and agglomerates (NOAA). In a second tier, more advanced modelling approaches are needed to produce quantitative exposure estimates. As currently no general quantitative nano-specific exposure models are available, this study evaluated the validity and applicability of using a generic exposure assessment model (the Advanced REACH Tool-ART) for occupational exposure to NOAA. The predictive capability of ART for occupational exposure to NOAA was tested by calculating the relative bias and correlations (Pearson) between the model estimates and measured concentrations using a dataset of 102 NOAA exposure measurements collected during experimental and workplace exposure studies. Moderate to (very) strong correlations between the ART estimates and measured concentrations were found. Estimates correlated better to measured concentration levels of dust (r = 0.76, P < 0.01) than liquid aerosols (r = 0.51, P = 0.19). However, ART overestimated the measured NOAA concentrations for both the experimental and field measurements (factor 2-127). Overestimation was highest at low concentrations and decreased with increasing concentration. Correlations seemed to be better when looking at the nanomaterials individually compared to combined scenarios, indicating that nanomaterial-specific characteristics are not well captured within the mechanistic model of the ART. Although ART in its current state is not capable to estimate occupational exposure to NOAA, the strong correlations for the individual nanomaterials indicate that the ART (and potentially other generic exposure models) have the potential to be extended or adapted for exposure to NOAA. In the future, studies investigating the potential to estimate exposure to NOAA should incorporate more explicitly nanomaterial-specific characteristics in their models. © The Author 2016. Published by Oxford University

Assessment of relative potential for Legionella species or surrogates inhalation exposure from common water uses.

PubMed

Hines, Stephanie A; Chappie, Daniel J; Lordo, Robert A; Miller, Brian D; Janke, Robert J; Lindquist, H Alan; Fox, Kim R; Ernst, Hiba S; Taft, Sarah C

2014-06-01

The Legionella species have been identified as important waterborne pathogens in terms of disease morbidity and mortality. Microbial exposure assessment is a tool that can be utilized to assess the potential of Legionella species inhalation exposure from common water uses. The screening-level exposure assessment presented in this paper developed emission factors to model aerosolization, quantitatively assessed inhalation exposures of aerosolized Legionella species or Legionella species surrogates while evaluating two generalized levels of assumed water concentrations, and developed a relative ranking of six common in-home uses of water for potential Legionella species inhalation exposure. Considerable variability in the calculated exposure dose was identified between the six identified exposure pathways, with the doses differing by over five orders of magnitude in each of the evaluated exposure scenarios. The assessment of exposure pathways that have been epidemiologically associated with legionellosis transmission (ultrasonic and cool mist humidifiers) produced higher estimated inhalation exposure doses than pathways where epidemiological evidence of transmission has been less strong (faucet and shower) or absent (toilets and therapy pool). With consideration of the large uncertainties inherent in the exposure assessment process used, a relative ranking of exposure pathways from highest to lowest exposure doses was produced using culture-based measurement data and the assumption of constant water concentration across exposure pathways. In this ranking, the ultrasonic and cool mist humidifier exposure pathways were estimated to produce the highest exposure doses, followed by the shower and faucet exposure pathways, and then the toilet and therapy pool exposure pathways. Published by Elsevier Ltd.

Assessing and reporting uncertainties in dietary exposure analysis - Part II: Application of the uncertainty template to a practical example of exposure assessment.

PubMed

Tennant, David; Bánáti, Diána; Kennedy, Marc; König, Jürgen; O'Mahony, Cian; Kettler, Susanne

2017-11-01

A previous publication described methods for assessing and reporting uncertainty in dietary exposure assessments. This follow-up publication uses a case study to develop proposals for representing and communicating uncertainty to risk managers. The food ingredient aspartame is used as the case study in a simple deterministic model (the EFSA FAIM template) and with more sophisticated probabilistic exposure assessment software (FACET). Parameter and model uncertainties are identified for each modelling approach and tabulated. The relative importance of each source of uncertainty is then evaluated using a semi-quantitative scale and the results expressed using two different forms of graphical summary. The value of this approach in expressing uncertainties in a manner that is relevant to the exposure assessment and useful to risk managers is then discussed. It was observed that the majority of uncertainties are often associated with data sources rather than the model itself. However, differences in modelling methods can have the greatest impact on uncertainties overall, particularly when the underlying data are the same. It was concluded that improved methods for communicating uncertainties for risk management is the research area where the greatest amount of effort is suggested to be placed in future. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Assessing Susceptibility from Early-Life Exposure to Carcinogens

PubMed Central

Barton, Hugh A.; Cogliano, V. James; Flowers, Lynn; Valcovic, Larry; Setzer, R. Woodrow; Woodruff, Tracey J.

2005-01-01

Cancer risk assessment methods currently assume that children and adults are equally susceptible to exposure to chemicals. We reviewed available scientific literature to determine whether this was scientifically supported. We identified more than 50 chemicals causing cancer after perinatal exposure. Human data are extremely limited, with radiation exposures showing increased early susceptibility at some tumor sites. Twenty-seven rodent studies for 18 chemicals had sufficient data after postnatal and adult exposures to quantitatively estimate potential increased susceptibility from early-life exposure, calculated as the ratio of juvenile to adult cancer potencies for three study types: acute dosing, repeated dosing, and lifetime dosing. Twelve of the chemicals act through a mutagenic mode of action. For these, the geometric mean ratio was 11 for lifetime exposures and 8.7 for repeat exposures, with a ratio of 10 for these studies combined. The geometric mean ratio for acute studies is 1.5, which was influenced by tissue-specific results [geometric mean ratios for kidney, leukemia, liver, lymph, mammary, nerve, reticular tissue, thymic lymphoma, and uterus/vagina > 1 (range, 1.6–8.1); forestomach, harderian gland, ovaries, and thyroid < 1 (range, 0.033–0.45)]. Chemicals causing cancer through other modes of action indicate some increased susceptibility from postnatal exposure (geometric mean ratio is 3.4 for lifetime exposure, 2.2 for repeat exposure). Early exposures to compounds with endocrine activity sometimes produce different tumors after exposures at different ages. These analyses suggest increased susceptibility to cancer from early-life exposure, particularly for chemicals acting through a mutagenic mode of action. PMID:16140616

Quantitative risk assessment for a glass fiber insulation product.

PubMed

Fayerweather, W E; Bender, J R; Hadley, J G; Eastes, W

1997-04-01

California Proposition 65 (Prop65) provides a mechanism by which the manufacturer may perform a quantitative risk assessment to be used in determining the need for cancer warning labels. This paper presents a risk assessment under this regulation for professional and do-it-yourself insulation installers. It determines the level of insulation glass fiber exposure (specifically Owens Corning's R-25 PinkPlus with Miraflex) that, assuming a working lifetime exposure, poses no significant cancer risk under Prop65's regulations. "No significant risk" is defined under Prop65 as a lifetime risk of no more than one additional cancer case per 100,000 exposed persons, and nonsignificant exposure is defined as a working lifetime exposure associated with "no significant risk." This determination can be carried out despite the fact that the relevant underlying studies (i.e., chronic inhalation bioassays) of comparable glass wool fibers do not show tumorigenic activity. Nonsignificant exposures are estimated from (1) the most recent RCC chronic inhalation bioassay of nondurable fiberglass in rats; (2) intraperitoneal fiberglass injection studies in rats; (3) a distributional, decision analysis approach applied to four chronic inhalation rat bioassays of conventional fiberglass; (4) an extrapolation from the RCC chronic rat inhalation bioassay of durable refractory ceramic fibers; and (5) an extrapolation from the IOM chronic rat inhalation bioassay of durable E glass microfibers. When the EPA linear nonthreshold model is used, central estimates of nonsignificant exposure range from 0.36 fibers/cc (for the RCC chronic inhalation bioassay of fiberglass) through 21 fibers/cc (for the i.p. fiberglass injection studies). Lower 95% confidence bounds on these estimates vary from 0.17 fibers/cc through 13 fibers/cc. Estimates derived from the distributional approach or from applying the EPA linear nonthreshold model to chronic bioassays of durable fibers such as refractory ceramic fiber

Caramel Color in Soft Drinks and Exposure to 4-Methylimidazole: A Quantitative Risk Assessment

PubMed Central

Smith, Tyler J. S.; Wolfson, Julia A.; Jiao, Ding; Crupain, Michael J.; Rangan, Urvashi; Sapkota, Amir; Bleich, Sara N.; Nachman, Keeve E.

2015-01-01

Caramel color is added to many widely-consumed beverages as a colorant. Consumers of these beverages can be exposed to 4-methylimidazole (4-MEI), a potential carcinogen formed during its manufacture. California’s Proposition 65 law requires that beverages containing 4-MEI concentrations corresponding to exposures that pose excess cancer risks > 1 case per 100,000 exposed persons (29 μg 4-MEI/day) carry warning labels. Using ultrahigh-performance liquid chromatography-tandem mass spectrometry, we assessed 4-MEI concentrations in 12 beverages purchased in California and a geographically distant metropolitan area (New York) in which warning labels are not required. In addition, we characterized beverage consumption by age and race/ethnicity (using weighted means calculated from logistic regressions) and assessed 4-MEI exposure and resulting cancer risks and US population cancer burdens attributable to beverage consumption. Data on beverage consumption were obtained from the National Health and Nutrition Examination Survey, dose-response data for 4-MEI were obtained from the California Environmental Protection Agency Office of Environmental Health Hazards Assessment, and data on population characteristics were obtained from the U.S. Census Bureau. Of the 12 beverages, Malta Goya had the highest 4-MEI concentration (915.8 to 963.3μg/L), lifetime average daily dose (LADD - 8.04x10-3 mg/kgBW-day), lifetime excess cancer risk (1.93x10-4) and burden (5,011 cancer cases in the U.S. population over 70 years); Coca-Cola had the lowest value of each (4-MEI: 9.5 to 11.7μg/L; LADD: 1.01x10-4 mg/kgBW-day; risk: 1.92x10-6; and burden: 76 cases). 4-MEI concentrations varied considerably by soda and state/area of purchase, but were generally consistent across lots of the same beverage purchased in the same state/area. Routine consumption of certain beverages can result in 4-MEI exposures > 29 μg/day. State regulatory standards appear to have been effective in reducing exposure

Caramel color in soft drinks and exposure to 4-methylimidazole: a quantitative risk assessment.

PubMed

Smith, Tyler J S; Wolfson, Julia A; Jiao, Ding; Crupain, Michael J; Rangan, Urvashi; Sapkota, Amir; Bleich, Sara N; Nachman, Keeve E

2015-01-01

Caramel color is added to many widely-consumed beverages as a colorant. Consumers of these beverages can be exposed to 4-methylimidazole (4-MEI), a potential carcinogen formed during its manufacture. California's Proposition 65 law requires that beverages containing 4-MEI concentrations corresponding to exposures that pose excess cancer risks > 1 case per 100,000 exposed persons (29 μg 4-MEI/day) carry warning labels. Using ultrahigh-performance liquid chromatography-tandem mass spectrometry, we assessed 4-MEI concentrations in 12 beverages purchased in California and a geographically distant metropolitan area (New York) in which warning labels are not required. In addition, we characterized beverage consumption by age and race/ethnicity (using weighted means calculated from logistic regressions) and assessed 4-MEI exposure and resulting cancer risks and US population cancer burdens attributable to beverage consumption. Data on beverage consumption were obtained from the National Health and Nutrition Examination Survey, dose-response data for 4-MEI were obtained from the California Environmental Protection Agency Office of Environmental Health Hazards Assessment, and data on population characteristics were obtained from the U.S. Census Bureau. Of the 12 beverages, Malta Goya had the highest 4-MEI concentration (915.8 to 963.3μg/L), lifetime average daily dose (LADD - 8.04x10-3 mg/kgBW-day), lifetime excess cancer risk (1.93x10-4) and burden (5,011 cancer cases in the U.S. population over 70 years); Coca-Cola had the lowest value of each (4-MEI: 9.5 to 11.7μg/L; LADD: 1.01x10-4 mg/kgBW-day; risk: 1.92x10-6; and burden: 76 cases). 4-MEI concentrations varied considerably by soda and state/area of purchase, but were generally consistent across lots of the same beverage purchased in the same state/area. Routine consumption of certain beverages can result in 4-MEI exposures > 29 μg/day. State regulatory standards appear to have been effective in reducing exposure to

A proposed framework for assessing risk from less-than-lifetime exposures to carcinogens.

PubMed

Felter, Susan P; Conolly, Rory B; Bercu, Joel P; Bolger, P Michael; Boobis, Alan R; Bos, Peter M J; Carthew, Philip; Doerrer, Nancy G; Goodman, Jay I; Harrouk, Wafa A; Kirkland, David J; Lau, Serrine S; Llewellyn, G Craig; Preston, R Julian; Schoeny, Rita; Schnatter, A Robert; Tritscher, Angelika; van Velsen, Frans; Williams, Gary M

2011-07-01

Quantitative methods for estimation of cancer risk have been developed for daily, lifetime human exposures. There are a variety of studies or methodologies available to address less-than-lifetime exposures. However, a common framework for evaluating risk from less-than-lifetime exposures (including short-term and/or intermittent exposures) does not exist, which could result in inconsistencies in risk assessment practice. To address this risk assessment need, a committee of the International Life Sciences Institute (ILSI) Health and Environmental Sciences Institute conducted a multisector workshop in late 2009 to discuss available literature, different methodologies, and a proposed framework. The proposed framework provides a decision tree and guidance for cancer risk assessments for less-than-lifetime exposures based on current knowledge of mode of action and dose-response. Available data from rodent studies and epidemiological studies involving less-than-lifetime exposures are considered, in addition to statistical approaches described in the literature for evaluating the impact of changing the dose rate and exposure duration for exposure to carcinogens. The decision tree also provides for scenarios in which an assumption of potential carcinogenicity is appropriate (e.g., based on structural alerts or genotoxicity data), but bioassay or other data are lacking from which a chemical-specific cancer potency can be determined. This paper presents an overview of the rationale for the workshop, reviews historical background, describes the proposed framework for assessing less-than-lifetime exposures to potential human carcinogens, and suggests next steps.

Exposure Assessment Tools by Routes

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Media

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Approaches

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Teaching quantitative biology: goals, assessments, and resources

PubMed Central

Aikens, Melissa L.; Dolan, Erin L.

2014-01-01

More than a decade has passed since the publication of BIO2010, calling for an increased emphasis on quantitative skills in the undergraduate biology curriculum. In that time, relatively few papers have been published that describe educational innovations in quantitative biology or provide evidence of their effects on students. Using a “backward design” framework, we lay out quantitative skill and attitude goals, assessment strategies, and teaching resources to help biologists teach more quantitatively. Collaborations between quantitative biologists and education researchers are necessary to develop a broader and more appropriate suite of assessment tools, and to provide much-needed evidence on how particular teaching strategies affect biology students' quantitative skill development and attitudes toward quantitative work. PMID:25368425

Comparison of task-based exposure metrics for an epidemiologic study of isocyanate inhalation exposures among autobody shop workers.

PubMed

Woskie, Susan R; Bello, Dhimiter; Gore, Rebecca J; Stowe, Meredith H; Eisen, Ellen A; Liu, Youcheng; Sparer, Judy A; Redlich, Carrie A; Cullen, Mark R

2008-09-01

Because many occupational epidemiologic studies use exposure surrogates rather than quantitative exposure metrics, the UMass Lowell and Yale study of autobody shop workers provided an opportunity to evaluate the relative utility of surrogates and quantitative exposure metrics in an exposure response analysis of cross-week change in respiratory function. A task-based exposure assessment was used to develop several metrics of inhalation exposure to isocyanates. The metrics included the surrogates, job title, counts of spray painting events during the day, counts of spray and bystander exposure events, and a quantitative exposure metric that incorporated exposure determinant models based on task sampling and a personal workplace protection factor for respirator use, combined with a daily task checklist. The result of the quantitative exposure algorithm was an estimate of the daily time-weighted average respirator-corrected total NCO exposure (microg/m(3)). In general, these four metrics were found to be variable in agreement using measures such as weighted kappa and Spearman correlation. A logistic model for 10% drop in FEV(1) from Monday morning to Thursday morning was used to evaluate the utility of each exposure metric. The quantitative exposure metric was the most favorable, producing the best model fit, as well as the greatest strength and magnitude of association. This finding supports the reports of others that reducing exposure misclassification can improve risk estimates that otherwise would be biased toward the null. Although detailed and quantitative exposure assessment can be more time consuming and costly, it can improve exposure-disease evaluations and is more useful for risk assessment purposes. The task-based exposure modeling method successfully produced estimates of daily time-weighted average exposures in the complex and changing autobody shop work environment. The ambient TWA exposures of all of the office workers and technicians and 57% of the

Challenges and perspectives of nanoparticle exposure assessment.

PubMed

Lee, Ji Hyun; Moon, Min Chaul; Lee, Joon Yeob; Yu, Il Je

2010-06-01

Nanoparticle exposure assessment presents a unique challenge in the field of occupational and environmental health. With the commercialization of nanotechnology, exposure usually starts from the workplace and then spreads to environment and consumer exposure. This report discusses the current trends of nanoparticle exposure assessment, including the definition of nanotechnology relevant terms, essential physicochemical properties for nanomaterial characterization, current international activities related nanomaterial safety, and exposure assessment standard development for nanotechnology. Further this report describes challenges of nanoparticle exposure assessment such as background measurement, metrics of nanoparticle exposure assessment and personal sampling.

A quantitative framework for assessing ecological resilience

EPA Science Inventory

Quantitative approaches to measure and assess resilience are needed to bridge gaps between science, policy, and management. In this paper, we suggest a quantitative framework for assessing ecological resilience. Ecological resilience as an emergent ecosystem phenomenon can be de...

Residual Isocyanates in Medical Devices and Products: A Qualitative and Quantitative Assessment

PubMed Central

Franklin, Gillian; Harari, Homero; Ahsan, Samavi; Bello, Dhimiter; Sterling, David A.; Nedrelow, Jonathan; Raynaud, Scott; Biswas, Swati; Liu, Youcheng

2016-01-01

We conducted a pilot qualitative and quantitative assessment of residual isocyanates and their potential initial exposures in neonates, as little is known about their contact effect. After a neonatal intensive care unit (NICU) stockroom inventory, polyurethane (PU) and PU foam (PUF) devices and products were qualitatively evaluated for residual isocyanates using Surface SWYPE™. Those containing isocyanates were quantitatively tested for methylene diphenyl diisocyanate (MDI) species, using UPLC-UV-MS/MS method. Ten of 37 products and devices tested, indicated both free and bound residual surface isocyanates; PU/PUF pieces contained aromatic isocyanates; one product contained aliphatic isocyanates. Overall, quantified mean MDI concentrations were low (4,4′-MDI = 0.52 to 140.1 pg/mg) and (2,4′-MDI = 0.01 to 4.48 pg/mg). The 4,4′-MDI species had the highest measured concentration (280 pg/mg). Commonly used medical devices/products contain low, but measurable concentrations of residual isocyanates. Quantifying other isocyanate species and neonatal skin exposure to isocyanates from these devices and products requires further investigation. PMID:27773989

Sugar concentration in nectar: a quantitative metric of crop attractiveness for refined pollinator risk assessments.

PubMed

Knopper, Loren D; Dan, Tereza; Reisig, Dominic D; Johnson, Josephine D; Bowers, Lisa M

2016-10-01

Those involved with pollinator risk assessment know that agricultural crops vary in attractiveness to bees. Intuitively, this means that exposure to agricultural pesticides is likely greatest for attractive plants and lowest for unattractive plants. While crop attractiveness in the risk assessment process has been qualitatively remarked on by some authorities, absent is direction on how to refine the process with quantitative metrics of attractiveness. At a high level, attractiveness of crops to bees appears to depend on several key variables, including but not limited to: floral, olfactory, visual and tactile cues; seasonal availability; physical and behavioral characteristics of the bee; plant and nectar rewards. Notwithstanding the complexities and interactions among these variables, sugar content in nectar stands out as a suitable quantitative metric by which to refine pollinator risk assessments for attractiveness. Provided herein is a proposed way to use sugar nectar concentration to adjust the exposure parameter (with what is called a crop attractiveness factor) in the calculation of risk quotients in order to derive crop-specific tier I assessments. This Perspective is meant to invite discussion on incorporating such changes in the risk assessment process. © 2016 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry. © 2016 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

EXPOSURE ASSESSMENT AND FUTURE DIRECTIONS IN EXPOSURE SCIENCE

EPA Science Inventory

Exposure is the contact between a stressor and a human or ecological receptor. Risk analysis step in which receptor interaction with the exposure stressor of concern is evaluated. To assess exposure to a particular stressor we need to know - Properties of the stressor; Sources, p...

A risk assessment framework for assessing metallic nanomaterials of environmental concern: aquatic exposure and behavior.

PubMed

O'Brien, Niall Joseph; Cummins, Enda J

2011-05-01

Nanomaterials are finding application in many different environmentally relevant products and processes due to enhanced catalytic, antimicrobial, and oxidative properties of materials at this scale. As the market share of nano-functionalized products increases, so too does the potential for environmental exposure and contamination. This study presents some exposure ranking methods that consider potential metallic nanomaterial surface water exposure and fate, due to nano-functionalized products, through a number of exposure pathways. These methods take into account the limited and disparate data currently available for metallic nanomaterials and apply variability and uncertainty principles, together with qualitative risk assessment principles, to develop a scientific ranking. Three exposure scenarios with three different nanomaterials were considered to demonstrate these assessment methods: photo-catalytic exterior paint (nano-scale TiO₂), antimicrobial food packaging (nano-scale Ag), and particulate-reducing diesel fuel additives (nano-scale CeO₂). Data and hypotheses from literature relating to metallic nanomaterial aquatic behavior (including the behavior of materials that may relate to nanomaterials in aquatic environments, e.g., metals, pesticides, surfactants) were used together with commercial nanomaterial characteristics and Irish natural aquatic environment characteristics to rank the potential concentrations, transport, and persistence behaviors within subjective categories. These methods, and the applied scenarios, reveal where data critical to estimating exposure and risk are lacking. As research into the behavior of metallic nanomaterials in different environments emerges, the influence of material and environmental characteristics on nanomaterial behavior within these exposure- and risk-ranking methods may be redefined on a quantitative basis. © 2010 Society for Risk Analysis.

Prioritizing Chemicals and Data Requirements for Screening-Level Exposure and Risk Assessment

PubMed Central

Brown, Trevor N.; Wania, Frank; Breivik, Knut; McLachlan, Michael S.

2012-01-01

Background: Scientists and regulatory agencies strive to identify chemicals that may cause harmful effects to humans and the environment; however, prioritization is challenging because of the large number of chemicals requiring evaluation and limited data and resources. Objectives: We aimed to prioritize chemicals for exposure and exposure potential and obtain a quantitative perspective on research needs to better address uncertainty in screening assessments. Methods: We used a multimedia mass balance model to prioritize > 12,000 organic chemicals using four far-field human exposure metrics. The propagation of variance (uncertainty) in key chemical information used as model input for calculating exposure metrics was quantified. Results: Modeled human concentrations and intake rates span approximately 17 and 15 orders of magnitude, respectively. Estimates of exposure potential using human concentrations and a unit emission rate span approximately 13 orders of magnitude, and intake fractions span 7 orders of magnitude. The actual chemical emission rate contributes the greatest variance (uncertainty) in exposure estimates. The human biotransformation half-life is the second greatest source of uncertainty in estimated concentrations. In general, biotransformation and biodegradation half-lives are greater sources of uncertainty in modeled exposure and exposure potential than chemical partition coefficients. Conclusions: Mechanistic exposure modeling is suitable for screening and prioritizing large numbers of chemicals. By including uncertainty analysis and uncertainty in chemical information in the exposure estimates, these methods can help identify and address the important sources of uncertainty in human exposure and risk assessment in a systematic manner. PMID:23008278

Accuracy of quantitative visual soil assessment

NASA Astrophysics Data System (ADS)

van Leeuwen, Maricke; Heuvelink, Gerard; Stoorvogel, Jetse; Wallinga, Jakob; de Boer, Imke; van Dam, Jos; van Essen, Everhard; Moolenaar, Simon; Verhoeven, Frank; Stoof, Cathelijne

2016-04-01

Visual soil assessment (VSA) is a method to assess soil quality visually, when standing in the field. VSA is increasingly used by farmers, farm organisations and companies, because it is rapid and cost-effective, and because looking at soil provides understanding about soil functioning. Often VSA is regarded as subjective, so there is a need to verify VSA. Also, many VSAs have not been fine-tuned for contrasting soil types. This could lead to wrong interpretation of soil quality and soil functioning when contrasting sites are compared to each other. We wanted to assess accuracy of VSA, while taking into account soil type. The first objective was to test whether quantitative visual field observations, which form the basis in many VSAs, could be validated with standardized field or laboratory measurements. The second objective was to assess whether quantitative visual field observations are reproducible, when used by observers with contrasting backgrounds. For the validation study, we made quantitative visual observations at 26 cattle farms. Farms were located at sand, clay and peat soils in the North Friesian Woodlands, the Netherlands. Quantitative visual observations evaluated were grass cover, number of biopores, number of roots, soil colour, soil structure, number of earthworms, number of gley mottles and soil compaction. Linear regression analysis showed that four out of eight quantitative visual observations could be well validated with standardized field or laboratory measurements. The following quantitative visual observations correlated well with standardized field or laboratory measurements: grass cover with classified images of surface cover; number of roots with root dry weight; amount of large structure elements with mean weight diameter; and soil colour with soil organic matter content. Correlation coefficients were greater than 0.3, from which half of the correlations were significant. For the reproducibility study, a group of 9 soil scientists and 7

Assessment of global flood exposures - developing an appropriate approach

NASA Astrophysics Data System (ADS)

Millinship, Ian; Booth, Naomi

2015-04-01

Increasingly complex probabilistic catastrophe models have become the standard for quantitative flood risk assessments by re/insurance companies. On the one hand, probabilistic modelling of this nature is extremely useful; a large range of risk metrics can be output. However, they can be time consuming and computationally expensive to develop and run. Levels of uncertainty are persistently high despite, or perhaps because of, attempts to increase resolution and complexity. A cycle of dependency between modelling companies and re/insurers has developed whereby available models are purchased, models run, and both portfolio and model data 'improved' every year. This can lead to potential exposures in perils and territories that are not currently modelled being largely overlooked by companies, who may then face substantial and unexpected losses when large events occur in these areas. We present here an approach to assessing global flood exposures which reduces the scale and complexity of approach used and begins with the identification of hotspots where there is a significant exposure to flood risk. The method comprises four stages: i) compile consistent exposure information, ii) to apply reinsurance terms and conditions to calculate values exposed, iii) to assess the potential hazard using a global set of flood hazard maps, and iv) to identify potential risk 'hotspots' which include considerations of spatially and/or temporally clustered historical events, and local flood defences. This global exposure assessment is designed as a scoping exercise, and reveals areas or cities where the potential for accumulated loss is of significant interest to a reinsurance company, and for which there is no existing catastrophe model. These regions are then candidates for the development of deterministic scenarios, or probabilistic models. The key advantages of this approach will be discussed. These include simplicity and ability of business leaders to understand results, as well as

Human Exposure Assessment for Air Pollution.

PubMed

Han, Bin; Hu, Li-Wen; Bai, Zhipeng

2017-01-01

Assessment of human exposure to air pollution is a fundamental part of the more general process of health risk assessment. The measurement methods for exposure assessment now include personal exposure monitoring, indoor-outdoor sampling, mobile monitoring, and exposure assessment modeling (such as proximity models, interpolation model, air dispersion models, and land-use regression (LUR) models). Among these methods, personal exposure measurement is considered to be the most accurate method of pollutant exposure assessment until now, since it can better quantify observed differences and better reflect exposure among smaller groups of people at ground level. And since the great differences of geographical environment, source distribution, pollution characteristics, economic conditions, and living habits, there is a wide range of differences between indoor, outdoor, and individual air pollution exposure in different regions of China. In general, the indoor particles in most Chinese families comprise infiltrated outdoor particles, particles generated indoors, and a few secondary organic aerosol particles, and in most cases, outdoor particle pollution concentrations are a major contributor to indoor concentrations in China. Furthermore, since the time, energy, and expense are limited, it is difficult to measure the concentration of pollutants for each individual. In recent years, obtaining the concentration of air pollutants by using a variety of exposure assessment models is becoming a main method which could solve the problem of the increasing number of individuals in epidemiology studies.

Towards quantitative assessment of calciphylaxis

NASA Astrophysics Data System (ADS)

Deserno, Thomas M.; Sárándi, István.; Jose, Abin; Haak, Daniel; Jonas, Stephan; Specht, Paula; Brandenburg, Vincent

2014-03-01

Calciphylaxis is a rare disease that has devastating conditions associated with high morbidity and mortality. Calciphylaxis is characterized by systemic medial calcification of the arteries yielding necrotic skin ulcerations. In this paper, we aim at supporting the installation of multi-center registries for calciphylaxis, which includes a photographic documentation of skin necrosis. However, photographs acquired in different centers under different conditions using different equipment and photographers cannot be compared quantitatively. For normalization, we use a simple color pad that is placed into the field of view, segmented from the image, and its color fields are analyzed. In total, 24 colors are printed on that scale. A least-squares approach is used to determine the affine color transform. Furthermore, the card allows scale normalization. We provide a case study for qualitative assessment. In addition, the method is evaluated quantitatively using 10 images of two sets of different captures of the same necrosis. The variability of quantitative measurements based on free hand photography is assessed regarding geometric and color distortions before and after our simple calibration procedure. Using automated image processing, the standard deviation of measurements is significantly reduced. The coefficients of variations yield 5-20% and 2-10% for geometry and color, respectively. Hence, quantitative assessment of calciphylaxis becomes practicable and will impact a better understanding of this rare but fatal disease.

Integrated Exposure Assessment Monitoring.

ERIC Educational Resources Information Center

Behar, Joseph V.; And Others

1979-01-01

Integrated Exposure Assessment Monitoring is the coordination of environmental (air, water, land, and crops) monitoring networks to collect systematically pollutant exposure data for a specific receptor, usually man. (Author/BB)

Development and Assessment of Modules to Integrate Quantitative Skills in Introductory Biology Courses.

PubMed

Hoffman, Kathleen; Leupen, Sarah; Dowell, Kathy; Kephart, Kerrie; Leips, Jeff

2016-01-01

Redesigning undergraduate biology courses to integrate quantitative reasoning and skill development is critical to prepare students for careers in modern medicine and scientific research. In this paper, we report on the development, implementation, and assessment of stand-alone modules that integrate quantitative reasoning into introductory biology courses. Modules are designed to improve skills in quantitative numeracy, interpreting data sets using visual tools, and making inferences about biological phenomena using mathematical/statistical models. We also examine demographic/background data that predict student improvement in these skills through exposure to these modules. We carried out pre/postassessment tests across four semesters and used student interviews in one semester to examine how students at different levels approached quantitative problems. We found that students improved in all skills in most semesters, although there was variation in the degree of improvement among skills from semester to semester. One demographic variable, transfer status, stood out as a major predictor of the degree to which students improved (transfer students achieved much lower gains every semester, despite the fact that pretest scores in each focus area were similar between transfer and nontransfer students). We propose that increased exposure to quantitative skill development in biology courses is effective at building competency in quantitative reasoning. © 2016 K. Hoffman, S. Leupen, et al. CBE—Life Sciences Education © 2016 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

Exposure Assessment Tools by Media - Air

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Routes - Inhalation

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Chemical Classes

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Media - Food

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Routes - Ingestion

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Routes - Dermal

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Promoting the safety performance of industrial radiography using a quantitative assessment system.

PubMed

Kardan, M R; Mianji, F A; Rastkhah, N; Babakhani, A; Azad, S Borhan

2006-12-01

The increasing number of industrial radiographers and their considerable occupational exposure has been one of the main concerns of the Iran Nuclear Regulatory Authority (INRA) in recent years. In 2002, a quantitative system of evaluating the safety performance of licensees and a complementary enforcement system was introduced by the National Radiation Protection Department (NRPD). Each parameter of the practice is given a weighting factor according to its importance to safety. Assessment of the licensees is done quantitatively by summing up their scores using prepared tables. Implementing this system of evaluation showed a considerable decrease in deficiencies in the various centres. Tables are updated regularly as a result of findings during the inspections. This system is used in addition to enforcement to promote safety performance and to increase the culture of safety in industrial radiography.

Fumonisin B1 Toxicity in Grower-Finisher Pigs: A Comparative Analysis of Genetically Engineered Bt Corn and non-Bt Corn by Using Quantitative Dietary Exposure Assessment Modeling

PubMed Central

Delgado, James E.; Wolt, Jeffrey D.

2011-01-01

In this study, we investigate the long-term exposure (20 weeks) to fumonisin B1 (FB1) in grower-finisher pigs by conducting a quantitative exposure assessment (QEA). Our analytical approach involved both deterministic and semi-stochastic modeling for dietary comparative analyses of FB1 exposures originating from genetically engineered Bacillus thuringiensis (Bt)-corn, conventional non-Bt corn and distiller’s dried grains with solubles (DDGS) derived from Bt and/or non-Bt corn. Results from both deterministic and semi-stochastic demonstrated a distinct difference of FB1 toxicity in feed between Bt corn and non-Bt corn. Semi-stochastic results predicted the lowest FB1 exposure for Bt grain with a mean of 1.5 mg FB1/kg diet and the highest FB1 exposure for a diet consisting of non-Bt grain and non-Bt DDGS with a mean of 7.87 mg FB1/kg diet; the chronic toxicological incipient level of concern is 1.0 mg of FB1/kg of diet. Deterministic results closely mirrored but tended to slightly under predict the mean result for the semi-stochastic analysis. This novel comparative QEA model reveals that diet scenarios where the source of grain is derived from Bt corn presents less potential to induce FB1 toxicity than diets containing non-Bt corn. PMID:21909298

Comparison of air pollution exposures in active vs. passive travel modes in European cities: A quantitative review.

PubMed

de Nazelle, Audrey; Bode, Olivier; Orjuela, Juan Pablo

2017-02-01

Transport microenvironments tend to have higher air pollutant concentrations than other settings most people encounter in their daily lives. The choice of travel modes may affect significantly individuals' exposures; however such considerations are typically not accounted for in exposure assessment used in environmental health studies. In particular, with increasing interest in the promotion of active travel, health impact studies that attempt to estimate potential adverse consequences of potential increased pollutant inhalation during walking or cycling have emerged. Such studies require a quantification of relative exposures in travel modes. The literature on air pollution exposures in travel microenvironments in Europe was reviewed. Studies which measured various travel modes including at least walking or cycling in a simultaneous or quasi-simultaneous design were selected. Data from these studies were harmonized to allow for a quantitative synthesis of the estimates. Ranges of ratios and 95% confidence interval (CI) of air pollution exposure between modes and between background and transportation modes were estimated. Ten studies measuring fine particulate matter (PM 2.5 ), black carbon (BC), ultrafine particles (UFP), and/or carbon monoxide (CO) in the walk, bicycle, car and/or bus modes were included in the analysis. Only three reported on CO and BC and results should be interpreted with caution. Pedestrians were shown to be the most consistently least exposed of all across studies, with the bus, bicycle and car modes on average 1.3 to 1.5 times higher for PM 2.5 ; 1.1 to 1.7 times higher for UFP; and 1.3 to 2.9 times higher for CO; however the 95% CI included 1 for the UFP walk to bus ratio. Only for BC were pedestrians more exposed than bus users on average (bus to walk ratio 0.8), but remained less exposed than those on bicycles or in cars. Car users tended to be the most exposed (from 2.9 times higher than pedestrians for BC down to similar exposures to

Quantitative extraction of the bedrock exposure rate based on unmanned aerial vehicle data and Landsat-8 OLI image in a karst environment

NASA Astrophysics Data System (ADS)

Wang, Hongyan; Li, Qiangzi; Du, Xin; Zhao, Longcai

2017-12-01

In the karst regions of southwest China, rocky desertification is one of the most serious problems in land degradation. The bedrock exposure rate is an important index to assess the degree of rocky desertification in karst regions. Because of the inherent merits of macro-scale, frequency, efficiency, and synthesis, remote sensing is a promising method to monitor and assess karst rocky desertification on a large scale. However, actual measurement of the bedrock exposure rate is difficult and existing remote-sensing methods cannot directly be exploited to extract the bedrock exposure rate owing to the high complexity and heterogeneity of karst environments. Therefore, using unmanned aerial vehicle (UAV) and Landsat-8 Operational Land Imager (OLI) data for Xingren County, Guizhou Province, quantitative extraction of the bedrock exposure rate based on multi-scale remote-sensing data was developed. Firstly, we used an object-oriented method to carry out accurate classification of UAVimages. From the results of rock extraction, the bedrock exposure rate was calculated at the 30 m grid scale. Parts of the calculated samples were used as training data; other data were used for model validation. Secondly, in each grid the band reflectivity of Landsat-8 OLI data was extracted and a variety of rock and vegetation indexes (e.g., NDVI and SAVI) were calculated. Finally, a network model was established to extract the bedrock exposure rate. The correlation coefficient of the network model was 0.855, that of the validation model was 0.677 and the root mean square error of the validation model was 0.073. This method is valuable for wide-scale estimation of bedrock exposure rate in karst environments. Using the quantitative inversion model, a distribution map of the bedrock exposure rate in Xingren County was obtained.

Quantitative risk assessment of human campylobacteriosis associated with thermophilic Campylobacter species in chickens.

PubMed

Rosenquist, Hanne; Nielsen, Niels L; Sommer, Helle M; Nørrung, Birgit; Christensen, Bjarke B

2003-05-25

A quantitative risk assessment comprising the elements hazard identification, hazard characterization, exposure assessment, and risk characterization has been prepared to assess the effect of different mitigation strategies on the number of human cases in Denmark associated with thermophilic Campylobacter spp. in chickens. To estimate the human exposure to Campylobacter from a chicken meal and the number of human cases associated with this exposure, a mathematical risk model was developed. The model details the spread and transfer of Campylobacter in chickens from slaughter to consumption and the relationship between ingested dose and the probability of developing campylobacteriosis. Human exposure was estimated in two successive mathematical modules. Module 1 addresses changes in prevalence and numbers of Campylobacter on chicken carcasses throughout the processing steps of a slaughterhouse. Module 2 covers the transfer of Campylobacter during food handling in private kitchens. The age and sex of consumers were included in this module to introduce variable hygiene levels during food preparation and variable sizes and compositions of meals. Finally, the outcome of the exposure assessment modules was integrated with a Beta-Poisson dose-response model to provide a risk estimate. Simulations designed to predict the effect of different mitigation strategies showed that the incidence of campylobacteriosis associated with consumption of chicken meals could be reduced 30 times by introducing a 2 log reduction of the number of Campylobacter on the chicken carcasses. To obtain a similar reduction of the incidence, the flock prevalence should be reduced approximately 30 times or the kitchen hygiene improved approximately 30 times. Cross-contamination from positive to negative flocks during slaughter had almost no effect on the human Campylobacter incidence, which indicates that implementation of logistic slaughter will only have a minor influence on the risk. Finally, the

Exposure Assessment Tools by Approaches - Exposure Reconstruction (Biomonitoring and Reverse Dosimetry)

EPA Pesticide Factsheets

This page provides access to a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases,

Exploring Global Exposure Factors Resources for Use in Consumer Exposure Assessments.

PubMed

Zaleski, Rosemary T; Egeghy, Peter P; Hakkinen, Pertti J

2016-07-22

This publication serves as a global comprehensive resource for readers seeking exposure factor data and information relevant to consumer exposure assessment. It describes the types of information that may be found in various official surveys and online and published resources. The relevant exposure factors cover a broad range, including general exposure factor data found in published compendia and databases and resources about specific exposure factors, such as human activity patterns and housing information. Also included are resources on exposure factors related to specific types of consumer products and the associated patterns of use, such as for a type of personal care product or a type of children's toy. Further, a section on using exposure factors for designing representative exposure scenarios is included, along with a look into the future for databases and other exposure science developments relevant for consumer exposure assessment.

HUMAN EXPOSURE ASSESSMENT USING IMMUNOASSAY

EPA Science Inventory

The National Exposure Research Laboratory-Las Vegas is developing analytical methods for human exposure assessment studies. Critical exposure studies generate a large number of samples which must be analyzed in a reliable, cost-effective and timely manner. TCP (3,5,6-trichlor...

30 CFR 62.110 - Noise exposure assessment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Noise exposure assessment. 62.110 Section 62... REGULATIONS OCCUPATIONAL NOISE EXPOSURE § 62.110 Noise exposure assessment. (a) The mine operator must establish a system of monitoring that evaluates each miner's noise exposure sufficiently to determine...

Quantitative Assessment of the Safety Benefits Associated with Increasing Clinical Peanut Thresholds Through Immunotherapy.

PubMed

Baumert, Joseph L; Taylor, Steve L; Koppelman, Stef J

Peanut immunotherapy studies are conducted with the aim to decrease the sensitivity of patients to peanut exposure with the outcome evaluated by testing the threshold for allergic response in a double-blind placebo-controlled food challenge. The clinical relevance of increasing this threshold is not well characterized. We aimed to quantify the clinical benefit of an increased threshold for peanut-allergic patients. Quantitative risk assessment was performed by matching modeled exposure to peanut protein with individual threshold levels. Exposure was modeled by pairing US consumption data for various food product categories with potential contamination levels of peanut that have been demonstrated to be present on occasion in such food products. Cookies, ice cream, doughnuts/snack cakes, and snack chip mixes were considered in the risk assessment. Increasing the baseline threshold before immunotherapy from 100 mg or less peanut protein to 300 mg peanut protein postimmunotherapy reduces the risk of experiencing an allergic reaction by more than 95% for all 4 food product categories that may contain trace levels of peanut residue. Further increase in the threshold to 1000 mg of peanut protein had an additional quantitative benefit in risk reduction for all patients reacting to 300 mg or less at baseline. We conclude that achieving thresholds of 300 mg and 1000 mg of peanut protein by peanut immunotherapy is clinically relevant, and that the risk for peanut-allergic patients who have achieved this increased threshold to experience an allergic reaction is reduced in a clinically meaningful way. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Exploring Global Exposure Factors Resources for Use in Consumer Exposure Assessments

PubMed Central

Zaleski, Rosemary T.; Egeghy, Peter P.; Hakkinen, Pertti J.

2016-01-01

This publication serves as a global comprehensive resource for readers seeking exposure factor data and information relevant to consumer exposure assessment. It describes the types of information that may be found in various official surveys and online and published resources. The relevant exposure factors cover a broad range, including general exposure factor data found in published compendia and databases and resources about specific exposure factors, such as human activity patterns and housing information. Also included are resources on exposure factors related to specific types of consumer products and the associated patterns of use, such as for a type of personal care product or a type of children’s toy. Further, a section on using exposure factors for designing representative exposure scenarios is included, along with a look into the future for databases and other exposure science developments relevant for consumer exposure assessment. PMID:27455300

Asbestos Exposure Assessment Database

NASA Technical Reports Server (NTRS)

Arcot, Divya K.

2010-01-01

Exposure to particular hazardous materials in a work environment is dangerous to the employees who work directly with or around the materials as well as those who come in contact with them indirectly. In order to maintain a national standard for safe working environments and protect worker health, the Occupational Safety and Health Administration (OSHA) has set forth numerous precautionary regulations. NASA has been proactive in adhering to these regulations by implementing standards which are often stricter than regulation limits and administering frequent health risk assessments. The primary objective of this project is to create the infrastructure for an Asbestos Exposure Assessment Database specific to NASA Johnson Space Center (JSC) which will compile all of the exposure assessment data into a well-organized, navigable format. The data includes Sample Types, Samples Durations, Crafts of those from whom samples were collected, Job Performance Requirements (JPR) numbers, Phased Contrast Microscopy (PCM) and Transmission Electron Microscopy (TEM) results and qualifiers, Personal Protective Equipment (PPE), and names of industrial hygienists who performed the monitoring. This database will allow NASA to provide OSHA with specific information demonstrating that JSC s work procedures are protective enough to minimize the risk of future disease from the exposures. The data has been collected by the NASA contractors Computer Sciences Corporation (CSC) and Wyle Laboratories. The personal exposure samples were collected from devices worn by laborers working at JSC and by building occupants located in asbestos-containing buildings.

IWGT report on quantitative approaches to genotoxicity risk ...

EPA Pesticide Factsheets

This is the second of two reports from the International Workshops on Genotoxicity Testing (IWGT) Working Group on Quantitative Approaches to Genetic Toxicology Risk Assessment (the QWG). The first report summarized the discussions and recommendations of the QWG related to the need for quantitative dose–response analysis of genetic toxicology data, the existence and appropriate evaluation of threshold responses, and methods to analyze exposure-response relationships and derive points of departure (PoDs) from which acceptable exposure levels could be determined. This report summarizes the QWG discussions and recommendations regarding appropriate approaches to evaluate exposure-related risks of genotoxic damage, including extrapolation below identified PoDs and across test systems and species. Recommendations include the selection of appropriate genetic endpoints and target tissues, uncertainty factors and extrapolation methods to be considered, the importance and use of information on mode of action, toxicokinetics, metabolism, and exposure biomarkers when using quantitative exposure-response data to determine acceptable exposure levels in human populations or to assess the risk associated with known or anticipated exposures. The empirical relationship between genetic damage (mutation and chromosomal aberration) and cancer in animal models was also examined. It was concluded that there is a general correlation between cancer induction and mutagenic and/or clast

A quantitative assessment of risks of heavy metal residues in laundered shop towels and their use by workers.

PubMed

Connor, Kevin; Magee, Brian

2014-10-01

This paper presents a risk assessment of exposure to metal residues in laundered shop towels by workers. The concentrations of 27 metals measured in a synthetic sweat leachate were used to estimate the releasable quantity of metals which could be transferred to workers' skin. Worker exposure was evaluated quantitatively with an exposure model that focused on towel-to-hand transfer and subsequent hand-to-food or -mouth transfers. The exposure model was based on conservative, but reasonable assumptions regarding towel use and default exposure factor values from the published literature or regulatory guidance. Transfer coefficients were derived from studies representative of the exposures to towel users. Contact frequencies were based on assumed high-end use of shop towels, but constrained by a theoretical maximum dermal loading. The risk estimates for workers developed for all metals were below applicable regulatory risk benchmarks. The risk assessment for lead utilized the Adult Lead Model and concluded that predicted lead intakes do not constitute a significant health hazard based on potential worker exposures. Uncertainties are discussed in relation to the overall confidence in the exposure estimates developed for each exposure pathway and the likelihood that the exposure model is under- or overestimating worker exposures and risk. Copyright © 2014 Elsevier Inc. All rights reserved.

Quantitative Microbial Risk Assessment Tutorial - Primer

EPA Science Inventory

This document provides a Quantitative Microbial Risk Assessment (QMRA) primer that organizes QMRA tutorials. The tutorials describe functionality of a QMRA infrastructure, guide the user through software use and assessment options, provide step-by-step instructions for implementi...

Assessing workplace chemical exposures: the role of exposure monitoring.

PubMed

Harper, Martin

2004-05-01

Occupational exposure is the condition of being subjected through employment to a chemical, physical, or biological agent, or to a specific process, practice, behavior, or organization of work. Exposure to a chemical agent is typically the contact of that agent with the outer boundary of a subject, such as the respiratory system, skin, or digestive system. In occupational hygiene we are most concerned with exposure through the respiratory system, although, increasingly we are concerned with the results of dermal exposures, including those exposures to the skin that can be transferred to the mouth and digestive system. This presentation will detail methods available for assessing personal exposures to chemicals through monitoring. The results from monitoring can then be compared to established guidelines and regulations, although this is not the only rationale for making measurements. These monitoring methods are currently used around the world to establish the benchmark hazard from which risk to the worker can be predicted. The presentation will describe the general techniques for assessing exposures to the respiratory system from chemical gases and vapors, chemical dusts, and exposures to the skin from bulk chemicals or chemical contamination of surfaces. For respiratory exposures, direct-reading instruments are available for spot measurements, and for monitoring short-term fluctuations in concentration. However, most standards and regulations are based on time-integrated (time-weighted average) exposures, requiring longer-term integrative methods. Therefore, the specific focus of this review will be the methods available for full work-shift sampling. For gases and vapors this will include taking whole-air samples in canisters or polymer bags, or concentration of chemicals by absorption in liquids or adsorption on solid sorbents, with subsequent chemical analysis. Chemical concentration can take place by pumping air through the sorbing media, or by allowing

Quantitative health impact assessment of transport policies: two simulations related to speed limit reduction and traffic re-allocation in the Netherlands.

PubMed

Schram-Bijkerk, D; van Kempen, E; Knol, A B; Kruize, H; Staatsen, B; van Kamp, I

2009-10-01

Few quantitative health impact assessments (HIAs) of transport policies have been published so far and there is a lack of a common methodology for such assessments. To evaluate the usability of existing HIA methodology to quantify health effects of transport policies at the local level. Health impact of two simulated but realistic transport interventions - speed limit reduction and traffic re-allocation - was quantified by selecting traffic-related exposures and health endpoints, modelling of population exposure, selecting exposure-effect relations and estimating the number of local traffic-related cases and disease burden, expressed in disability-adjusted life-years (DALYs), before and after the intervention. Exposure information was difficult to retrieve because of the local scale of the interventions, and exposure-effect relations for subgroups and combined effects were missing. Given uncertainty in the outcomes originating from this kind of missing information, simulated changes in population health by two local traffic interventions were estimated to be small (<5%), except for the estimated reduction in DALYs by less traffic accidents (60%) due to speed limit reduction. Quantitative HIA of transport policies at a local scale is possible, provided that data on exposures, the exposed population and their baseline health status are available. The interpretation of the HIA information should be carried out in the context of the quality of input data and assumptions and uncertainties of the analysis.

Crystalline silica exposure and lung cancer mortality in diatomaceous earth industry workers: a quantitative risk assessment.

PubMed

Rice, F L; Park, R; Stayner, L; Smith, R; Gilbert, S; Checkoway, H

2001-01-01

To use various exposure-response models to estimate the risk of mortality from lung cancer due to occupational exposure to respirable crystalline silica dust. Data from a cohort mortality study of 2342 white male California diatomaceous earth mining and processing workers exposed to crystalline silica dust (mainly cristobalite) were reanalyzed with Poisson regression and Cox's proportional hazards models. Internal and external adjustments were used to control for potential confounding from the effects of time since first observation, calendar time, age, and Hispanic ethnicity. Cubic smoothing spline models were used to assess the fit of the models. Exposures were lagged by 10 years. Evaluations of the fit of the models were performed by comparing their deviances. Lifetime risks of lung cancer were estimated up to age 85 with an actuarial approach that accounted for competing causes of death. Exposure to respirable crystalline silica dust was a significant predictor (p<0.05) in nearly all of the models evaluated and the linear relative rate model with a 10 year exposure lag seemed to give the best fit in the Poisson regression analysis. For those who died of lung cancer the linear relative rate model predicted rate ratios for mortality from lung cancer of about 1.6 for the mean cumulative exposure to respirable silica compared with no exposure. The excess lifetime risk (to age 85) of mortality from lung cancer for white men exposed for 45 years and with a 10 year lag period at the current Occupational Safety and Health Administration (OSHA) standard of about 0.05 mg/m(3) for respirable cristobalite dust is 19/1000 (95% confidence interval (95% CI) 5/1000 to 46/1000). There was a significant risk of mortality from lung cancer that increased with cumulative exposure to respirable crystalline silica dust. The predicted number of deaths from lung cancer suggests that current occupational health standards may not be adequately protecting workers from the risk of lung

Exposure Assessment Tools by Chemical Classes - Nanomaterials

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Lifestages and Populations

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Media - Consumer Products

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Tiers and Types

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Chemical Classes - Pesticides

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Media - Aquatic Biota

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Chemical Classes - Other ...

EPA Pesticide Factsheets

2017-02-13

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Tiers and Types - Deterministic and Probabilistic Assessments

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Comparative Probabilistic Assessment of Occupational Pesticide Exposures Based on Regulatory Assessments

PubMed Central

Pouzou, Jane G.; Cullen, Alison C.; Yost, Michael G.; Kissel, John C.; Fenske, Richard A.

2018-01-01

Implementation of probabilistic analyses in exposure assessment can provide valuable insight into the risks of those at the extremes of population distributions, including more vulnerable or sensitive subgroups. Incorporation of these analyses into current regulatory methods for occupational pesticide exposure is enabled by the exposure data sets and associated data currently used in the risk assessment approach of the Environmental Protection Agency (EPA). Monte Carlo simulations were performed on exposure measurements from the Agricultural Handler Exposure Database and the Pesticide Handler Exposure Database along with data from the Exposure Factors Handbook and other sources to calculate exposure rates for three different neurotoxic compounds (azinphos methyl, acetamiprid, emamectin benzoate) across four pesticide-handling scenarios. Probabilistic estimates of doses were compared with the no observable effect levels used in the EPA occupational risk assessments. Some percentage of workers were predicted to exceed the level of concern for all three compounds: 54% for azinphos methyl, 5% for acetamiprid, and 20% for emamectin benzoate. This finding has implications for pesticide risk assessment and offers an alternative procedure that may be more protective of those at the extremes of exposure than the current approach. PMID:29105804

Comparative Probabilistic Assessment of Occupational Pesticide Exposures Based on Regulatory Assessments.

PubMed

Pouzou, Jane G; Cullen, Alison C; Yost, Michael G; Kissel, John C; Fenske, Richard A

2017-11-06

Implementation of probabilistic analyses in exposure assessment can provide valuable insight into the risks of those at the extremes of population distributions, including more vulnerable or sensitive subgroups. Incorporation of these analyses into current regulatory methods for occupational pesticide exposure is enabled by the exposure data sets and associated data currently used in the risk assessment approach of the Environmental Protection Agency (EPA). Monte Carlo simulations were performed on exposure measurements from the Agricultural Handler Exposure Database and the Pesticide Handler Exposure Database along with data from the Exposure Factors Handbook and other sources to calculate exposure rates for three different neurotoxic compounds (azinphos methyl, acetamiprid, emamectin benzoate) across four pesticide-handling scenarios. Probabilistic estimates of doses were compared with the no observable effect levels used in the EPA occupational risk assessments. Some percentage of workers were predicted to exceed the level of concern for all three compounds: 54% for azinphos methyl, 5% for acetamiprid, and 20% for emamectin benzoate. This finding has implications for pesticide risk assessment and offers an alternative procedure that may be more protective of those at the extremes of exposure than the current approach. © 2017 Society for Risk Analysis.

Assessment of dermal exposure of greenhouse workers to the pesticide bupirimate.

PubMed

Jongen, M J; Engel, R; Leenheers, L H

1992-01-01

An HPLC method was developed for estimation of dermal exposure of greenhouse workers to the pesticide bupirimate. Chromatography was performed on a cyano-modified silica column with methanol-water (6:4 by volume) containing 5 g/L ammonium sulfate as eluent. UV detection at 310 nm was used for quantitation. Dermal exposure was assessed by letting the workers wear cotton gloves and by measuring foliar dislodgable residues in the greenhouses as potential exposure. The analytical procedure was validated for measurement of bupirimate on cotton gloves and in solutions used for the estimation of foliar dislodgable residues. Gloves were extracted with methanol. Recovery of bupirimate from fortified gloves was complete. Methanol extracts with one volume of water added and solutions containing dislodgable residues were injected directly onto the HPLC system. The limit of detection was 30 micrograms/L. Between-day coefficients of variation were 7 and 4% at concentrations of 0.6 and 28 mg/L, respectively.

The Language Exposure Assessment Tool: Quantifying Language Exposure in Infants and Children

ERIC Educational Resources Information Center

DeAnda, Stephanie; Bosch, Laura; Poulin-Dubois, Diane; Zesiger, Pascal; Friend, Margaret

2016-01-01

Purpose: The aim of this study was to develop the Language Exposure Assessment Tool (LEAT) and to examine its cross-linguistic validity, reliability, and utility. The LEAT is a computerized interview-style assessment that requests parents to estimate language exposure. The LEAT yields an automatic calculation of relative language exposure and…

Evaluating interventions against Salmonella in broiler chickens: applying synthesis research in support of quantitative exposure assessment.

PubMed

Bucher, O; Fazil, A; Rajić, A; Farrar, A; Wills, R; McEwen, S A

2012-05-01

A scoping study and systematic review-meta-analyses (SR-MAs) were conducted to evaluate the effectiveness of various interventions for Salmonella in broiler chicken, from grow-out farm to secondary processing. The resulting information was used to inform a quantitative exposure assessment (QEA) comparing various control options within the context of broiler chicken production in Ontario, Canada. Multiple scenarios, including use of two separate on-farm interventions (CF3 competitive exclusion culture and a 2% lactose water additive), a package of processing interventions (a sodium hydroxide scald water disinfectant, a chlorinated post-evisceration spray, a trisodium phosphate pre-chill spray and chlorinated immersion chilling) a package consisting of these farm and processing interventions and a hypothetical scenario (reductions in between-flock prevalence and post-transport concentration), were simulated and compared to a baseline scenario. The package of on-farm and processing interventions was the most effective in achieving relative reductions (compared to baseline with no interventions) in the concentration and prevalence of Salmonella by the end of chilling ranging from 89·94% to 99·87% and 43·88% to 87·78%, respectively. Contaminated carcasses entering defeathering, reductions in concentration due to scalding and post-evisceration washing, and the potential for cross-contamination during chilling had the largest influence on the model outcomes under the current assumptions. Scoping study provided a transparent process for mapping out and selecting promising interventions, while SR-MA was useful for generating more precise and robust intervention effect estimates for QEA. Realization of the full potential of these methods was hampered by low methodological soundness and reporting of primary research in this area.

Exposure assessment of carbon nanotubes at pilot factory focusing on quantitative determination of catalytic metals.

PubMed

Kato, Nobuyuki; Nagaya, Taiki; Matsui, Yasuto; Yoneda, Minoru

2017-11-25

The application of multiwall carbon nanotubes (MWCNTs) currently extends to various fields. However, it has been reported that exposure to CNT causes hazardous effects on animals and cells. The purpose of this study was to quantify the exposure to MWCNT in MWCNT/polymer composites for exposure assessment. We focused on catalytic metals included in the MWCNT and the diameter of dust released during the working processes. Although the Co in MWCNTs is not a common catalyst, it was used as a tracer in this study. A field survey was conducted in a MWCNT/polymer composite pilot factory. Airborne MWCNTs were monitored using black carbon monitors (BCMs) and optical particle sizers (OPSs) and collected on a filter. The MWCNT powder, all polymer resins used during the working processes, and the filter were analyzed in our lab using inductively coupled plasma mass spectrometry (ICP-MS) and electron microscopic observation. The mean concentration of airborne MWCNT contained in the collected dust was 0.92 μg/m 3 a few meters away from the extruder during the working processes (using elemental analysis). The maximum concentration measured using BCMs was shown to be seven times higher than the base concentration during the pelletizing process of polycarbonate (PC) and MWCNT composites. However, free, isolated, and unbound agglomerated MWCNTs were not detected using scanning electron microscopic (SEM) observation. The result obtained by elemental analysis indicated it was possible to quantify MWCNT in composites. The mean concentration at this factory was lower than the recommended exposure limit. However, additional studies during the pelletizing process are required in the future.

Quantitative Microbial Risk Assessment Tutorial: HSPF Setup, Application, and Calibration of Flows and Microbial Fate and Transport on an Example Watershed

EPA Science Inventory

A Quantitative Microbial Risk Assessment (QMRA) infrastructure that automates the manual process of characterizing transport of pathogens and microorganisms, from the source of release to a point of exposure, has been developed by loosely configuring a set of modules and process-...

Pleural mesothelioma and occupational and non-occupational asbestos exposure: a case-control study with quantitative risk assessment.

PubMed

Ferrante, Daniela; Mirabelli, Dario; Tunesi, Sara; Terracini, Benedetto; Magnani, Corrado

2016-03-01

Casale Monferrato (north west Italy) is an area with an exceptionally high incidence of mesothelioma caused by asbestos contamination at work and in the general environment from the asbestos-cement Eternit plant that was operational until 1986. The purpose of this study was to quantify the association between pleural malignant mesothelioma (PMM) and asbestos cumulative exposure using individual assessment of environmental and domestic exposure, as well as of occupational exposure. This population-based case-control study included cases of PMM diagnosed between January 2001 and June 2006 among residents in the Casale Monferrato Local Health Authority. Population controls were randomly sampled, matched by age and sex to cases. Cumulative exposure was estimated to account for the lifelong exposure history. Analyses were conducted using unconditional logistic regression models adjusting for gender, age at diagnosis and type of interview (direct or proxy respondents). 200 PMM cases of 223 eligible cases (89.7%) and 348 (63%) of 552 eligible controls accepted to be interviewed. ORs increased with cumulative exposure index (p<0.0001) from 4.4 (CI 95% 1.7 to 11.3) (<1 f/mL-years) to 62.1 (CI 95% 22.2 to 173.2) (≥10 f/mL-years). Among subjects never occupationally exposed, corresponding ORs were 3.8 (CI 95% 1.3 to 11.1) and 23.3 (CI 95% 2.9 to 186.9) (reference: background level of asbestos exposure). ORs of about 2, statistically significant, were observed for domestic exposure and for living in houses near buildings with large asbestos cement parts. Risk of PMM increased with cumulative asbestos exposure and also in analyses limited to subjects non-occupationally exposed. Our results also provide indication of risk associated with common sources of environmental exposure and are highly relevant for the evaluation of residual risk after the cessation of asbestos industrial use. Published by the BMJ Publishing Group Limited. For permission to use (where not already

APPROACHES TO RISK ASSESSMENT FOR MULTIPLE CHEMICAL EXPOSURES

EPA Science Inventory

The Environmental Criteria and Assessment Office (ECAO) in Cincinnati has developed health risk assessment methods for chronic exposure to single chemical from a single route of exposure. Risk assessments for carcinogens associated an exposure level with a particular incidence of...

GESTATIONAL EXPOSURE TO CHLORPYRIFOS: QUALITATIVE AND QUANTITATIVE NEUROPATHOLOGICAL CHANGES IN THE FETAL NEOCORTEX.

EPA Science Inventory

This study investigated the qualitative and quantitative neuropathological changes that occur in the fetal brain following gestational exposure to chlorpyrifos [(O,O'diethyl O-3,5,6-trichloro-2-pyridyl) phosphorothionate], a commonly used organophosphorus insecticide. Two cohort...

Assessing the performance of the generalized propensity score for estimating the effect of quantitative or continuous exposures on survival or time-to-event outcomes.

PubMed

Austin, Peter C

2018-01-01

Propensity score methods are frequently used to estimate the effects of interventions using observational data. The propensity score was originally developed for use with binary exposures. The generalized propensity score (GPS) is an extension of the propensity score for use with quantitative or continuous exposures (e.g. pack-years of cigarettes smoked, dose of medication, or years of education). We describe how the GPS can be used to estimate the effect of continuous exposures on survival or time-to-event outcomes. To do so we modified the concept of the dose-response function for use with time-to-event outcomes. We used Monte Carlo simulations to examine the performance of different methods of using the GPS to estimate the effect of quantitative exposures on survival or time-to-event outcomes. We examined covariate adjustment using the GPS and weighting using weights based on the inverse of the GPS. The use of methods based on the GPS was compared with the use of conventional G-computation and weighted G-computation. Conventional G-computation resulted in estimates of the dose-response function that displayed the lowest bias and the lowest variability. Amongst the two GPS-based methods, covariate adjustment using the GPS tended to have the better performance. We illustrate the application of these methods by estimating the effect of average neighbourhood income on the probability of survival following hospitalization for an acute myocardial infarction.

Crystalline silica exposure and lung cancer mortality in diatomaceous earth industry workers: a quantitative risk assessment

PubMed Central

Rice, F; Park, R; Stayner, L; Smith, R; Gilbert, S; Checkoway, H

2001-01-01

OBJECTIVE—To use various exposure-response models to estimate the risk of mortality from lung cancer due to occupational exposure to respirable crystalline silica dust.
METHODS—Data from a cohort mortality study of 2342 white male California diatomaceous earth mining and processing workers exposed to crystalline silica dust (mainly cristobalite) were reanalyzed with Poisson regression and Cox's proportional hazards models. Internal and external adjustments were used to control for potential confounding from the effects of time since first observation, calendar time, age, and Hispanic ethnicity. Cubic smoothing spline models were used to assess the fit of the models. Exposures were lagged by 10 years. Evaluations of the fit of the models were performed by comparing their deviances. Lifetime risks of lung cancer were estimated up to age 85 with an actuarial approach that accounted for competing causes of death.
RESULTS—Exposure to respirable crystalline silica dust was a significant predictor (p<0.05) in nearly all of the models evaluated and the linear relative rate model with a 10 year exposure lag seemed to give the best fit in the Poisson regression analysis. For those who died of lung cancer the linear relative rate model predicted rate ratios for mortality from lung cancer of about 1.6 for the mean cumulative exposure to respirable silica compared with no exposure. The excess lifetime risk (to age 85) of mortality from lung cancer for white men exposed for 45 years and with a 10 year lag period at the current Occupational Safety and Health Administration (OSHA) standard of about 0.05 mg/m3 for respirable cristobalite dust is 19/1000 (95% confidence interval (95% CI) 5/1000 to 46/1000).
CONCLUSIONS—There was a significant risk of mortality from lung cancer that increased with cumulative exposure to respirable crystalline silica dust. The predicted number of deaths from lung cancer suggests that current occupational health standards may not

Exposure assessment of carbon nanotubes at pilot factory focusing on quantitative determination of catalytic metals

PubMed Central

Kato, Nobuyuki; Nagaya, Taiki; Matsui, Yasuto; Yoneda, Minoru

2017-01-01

Objectives: The application of multiwall carbon nanotubes (MWCNTs) currently extends to various fields. However, it has been reported that exposure to CNT causes hazardous effects on animals and cells. The purpose of this study was to quantify the exposure to MWCNT in MWCNT/polymer composites for exposure assessment. We focused on catalytic metals included in the MWCNT and the diameter of dust released during the working processes. Although the Co in MWCNTs is not a common catalyst, it was used as a tracer in this study. Methods: A field survey was conducted in a MWCNT/polymer composite pilot factory. Airborne MWCNTs were monitored using black carbon monitors (BCMs) and optical particle sizers (OPSs) and collected on a filter. The MWCNT powder, all polymer resins used during the working processes, and the filter were analyzed in our lab using inductively coupled plasma mass spectrometry (ICP-MS) and electron microscopic observation. Results: The mean concentration of airborne MWCNT contained in the collected dust was 0.92 μg/m3 a few meters away from the extruder during the working processes (using elemental analysis). The maximum concentration measured using BCMs was shown to be seven times higher than the base concentration during the pelletizing process of polycarbonate (PC) and MWCNT composites. However, free, isolated, and unbound agglomerated MWCNTs were not detected using scanning electron microscopic (SEM) observation. Conclusions: The result obtained by elemental analysis indicated it was possible to quantify MWCNT in composites. The mean concentration at this factory was lower than the recommended exposure limit. However, additional studies during the pelletizing process are required in the future. PMID:28993572

A QUANTITATIVE APPROACH FOR ESTIMATING EXPOSURE TO PESTICIDES IN THE AGRICULTURAL HEALTH STUDY

EPA Science Inventory

We developed a quantitative method to estimate chemical-specific pesticide exposures in a large prospective cohort study of over 58,000 pesticide applicators in North Carolina and Iowa. An enrollment questionnaire was administered to applicators to collect basic time- and inten...

Development of an agricultural job-exposure matrix for British Columbia, Canada.

PubMed

Wood, David; Astrakianakis, George; Lang, Barbara; Le, Nhu; Bert, Joel

2002-09-01

Farmers in British Columbia (BC), Canada have been shown to have unexplained elevated proportional mortality rates for several cancers. Because agricultural exposures have never been documented systematically in BC, a quantitative agricultural Job-exposure matrix (JEM) was developed containing exposure assessments from 1950 to 1998. This JEM was developed to document historical exposures and to facilitate future epidemiological studies. Available information regarding BC farming practices was compiled and checklists of potential exposures were produced for each crop. Exposures identified included chemical, biological, and physical agents. Interviews with farmers and agricultural experts were conducted using the checklists as a starting point. This allowed the creation of an initial or 'potential' JEM based on three axes: exposure agent, 'type of work' and time. The 'type of work' axis was determined by combining several variables: region, crop, job title and task. This allowed for a complete description of exposures. Exposure assessments were made quantitatively, where data allowed, or by a dichotomous variable (exposed/unexposed). Quantitative calculations were divided into re-entry and application scenarios. 'Re-entry' exposures were quantified using a standard exposure model with some modification while application exposure estimates were derived using data from the North American Pesticide Handlers Exposure Database (PHED). As expected, exposures differed between crops and job titles both quantitatively and qualitatively. Of the 290 agents included in the exposure axis; 180 were pesticides. Over 3000 estimates of exposure were conducted; 50% of these were quantitative. Each quantitative estimate was at the daily absorbed dose level. Exposure estimates were then rated as high, medium, or low based on comparing them with their respective oral chemical reference dose (RfD) or Acceptable Daily Intake (ADI). This data was mainly obtained from the US Environmental

Quantitative risk assessment of E. coli in street-vended cassava-based delicacies in the Philippines

NASA Astrophysics Data System (ADS)

Mesias, I. C. P.

2018-01-01

In the Philippines, rootcrop-based food products are gaining popularity in street food trade. However, a number of street-vended food products in the country are reported to be contaminated with E. coli posing possible risk among consumers. In this study, information on quantitative risk assessment of E. coli in street-vended cassava-based delicacies was generated. The assessment started with the prevalence and concentration of E. coli at post production in packages of the cassava-based delicacies. Combase growth predictor was used to trace the microbial population of E. coli in each step of the food chain. The @Risk software package, version 6 (Palisade USA) was used to run the simulations. Scenarios in the post-production to consumption pathway were simulated. The effect was then assessed in relation to exposure to the defined infective dose. In the worst case scenario, a minimum and most likely concentration of 6.3 and 7.8 log CFU of E. coli per serving respectively were observed. The simulation revealed that lowering the temperature in the chain considerably decreased the E. coli concentration prior to consumption and subsequently decreased the percentage of exposure to the infective dose. Exposure to infective dose however was increased with longer lag time from postproduction to consumption.

Quantitative methods in assessment of neurologic function.

PubMed

Potvin, A R; Tourtellotte, W W; Syndulko, K; Potvin, J

1981-01-01

Traditionally, neurologists have emphasized qualitative techniques for assessing results of clinical trials. However, in recent years qualitative evaluations have been increasingly augmented by quantitative tests for measuring neurologic functions pertaining to mental state, strength, steadiness, reactions, speed, coordination, sensation, fatigue, gait, station, and simulated activities of daily living. Quantitative tests have long been used by psychologists for evaluating asymptomatic function, assessing human information processing, and predicting proficiency in skilled tasks; however, their methodology has never been directly assessed for validity in a clinical environment. In this report, relevant contributions from the literature on asymptomatic human performance and that on clinical quantitative neurologic function are reviewed and assessed. While emphasis is focused on tests appropriate for evaluating clinical neurologic trials, evaluations of tests for reproducibility, reliability, validity, and examiner training procedures, and for effects of motivation, learning, handedness, age, and sex are also reported and interpreted. Examples of statistical strategies for data analysis, scoring systems, data reduction methods, and data display concepts are presented. Although investigative work still remains to be done, it appears that carefully selected and evaluated tests of sensory and motor function should be an essential factor for evaluating clinical trials in an objective manner.

Combining a Job-Exposure Matrix with Exposure Measurements to Assess Occupational Exposure to Benzene in a Population Cohort in Shanghai, China

PubMed Central

Friesen, Melissa C.; Coble, Joseph B.; Lu, Wei; Shu, Xiao-Ou; Ji, Bu-Tian; Xue, Shouzheng; Portengen, Lutzen; Chow, Wong-Ho; Gao, Yu-Tang; Yang, Gong; Rothman, Nathaniel; Vermeulen, Roel

2012-01-01

Background: Generic job-exposure matrices (JEMs) are often used in population-based epidemiologic studies to assess occupational risk factors when only the job and industry information of each subject is available. JEM ratings are often based on professional judgment, are usually ordinal or semi-quantitative, and often do not account for changes in exposure over time. We present an empirical Bayesian framework that combines ordinal subjective JEM ratings with benzene measurements. Our aim was to better discriminate between job, industry, and time differences in exposure levels compared to using a JEM alone. Methods: We combined 63 221 short-term area air measurements of benzene exposure (1954–2000) collected during routine health and safety inspections in Shanghai, China, with independently developed JEM intensity ratings for each job and industry using a mixed-effects model. The fixed-effects terms included the JEM intensity ratings for job and industry (both ordinal, 0–3) and a time trend that we incorporated as a b-spline. The random-effects terms included job (n = 33) and industry nested within job (n = 399). We predicted the benzene concentration in two ways: (i) a calibrated JEM estimate was calculated using the fixed-effects model parameters for calendar year and JEM intensity ratings; (ii) a job-/industry-specific estimate was calculated using the fixed-effects model parameters and the best linear unbiased predictors from the random effects for job and industry using an empirical Bayes estimation procedure. Finally, we applied the predicted benzene exposures to a prospective population-based cohort of women in Shanghai, China (n = 74 942). Results: Exposure levels were 13 times higher in 1965 than in 2000 and declined at a rate that varied from 4 to 15% per year from 1965 to 1985, followed by a small peak in the mid-1990s. The job-/industry-specific estimates had greater differences between exposure levels than the calibrated JEM estimates (97.5th

Semi-quantitative proteomics of mammalian cells upon short-term exposure to non-ionizing electromagnetic fields.

PubMed

Kuzniar, Arnold; Laffeber, Charlie; Eppink, Berina; Bezstarosti, Karel; Dekkers, Dick; Woelders, Henri; Zwamborn, A Peter M; Demmers, Jeroen; Lebbink, Joyce H G; Kanaar, Roland

2017-01-01

The potential effects of non-ionizing electromagnetic fields (EMFs), such as those emitted by power-lines (in extremely low frequency range), mobile cellular systems and wireless networking devices (in radio frequency range) on human health have been intensively researched and debated. However, how exposure to these EMFs may lead to biological changes underlying possible health effects is still unclear. To reveal EMF-induced molecular changes, unbiased experiments (without a priori focusing on specific biological processes) with sensitive readouts are required. We present the first proteome-wide semi-quantitative mass spectrometry analysis of human fibroblasts, osteosarcomas and mouse embryonic stem cells exposed to three types of non-ionizing EMFs (ELF 50 Hz, UMTS 2.1 GHz and WiFi 5.8 GHz). We performed controlled in vitro EMF exposures of metabolically labeled mammalian cells followed by reliable statistical analyses of differential protein- and pathway-level regulations using an array of established bioinformatics methods. Our results indicate that less than 1% of the quantitated human or mouse proteome responds to the EMFs by small changes in protein abundance. Further network-based analysis of the differentially regulated proteins did not detect significantly perturbed cellular processes or pathways in human and mouse cells in response to ELF, UMTS or WiFi exposure. In conclusion, our extensive bioinformatics analyses of semi-quantitative mass spectrometry data do not support the notion that the short-time exposures to non-ionizing EMFs have a consistent biologically significant bearing on mammalian cells in culture.

Semi-quantitative proteomics of mammalian cells upon short-term exposure to non-ionizing electromagnetic fields

PubMed Central

Laffeber, Charlie; Eppink, Berina; Bezstarosti, Karel; Dekkers, Dick; Woelders, Henri; Zwamborn, A. Peter M.; Demmers, Jeroen; Lebbink, Joyce H. G.; Kanaar, Roland

2017-01-01

The potential effects of non-ionizing electromagnetic fields (EMFs), such as those emitted by power-lines (in extremely low frequency range), mobile cellular systems and wireless networking devices (in radio frequency range) on human health have been intensively researched and debated. However, how exposure to these EMFs may lead to biological changes underlying possible health effects is still unclear. To reveal EMF-induced molecular changes, unbiased experiments (without a priori focusing on specific biological processes) with sensitive readouts are required. We present the first proteome-wide semi-quantitative mass spectrometry analysis of human fibroblasts, osteosarcomas and mouse embryonic stem cells exposed to three types of non-ionizing EMFs (ELF 50 Hz, UMTS 2.1 GHz and WiFi 5.8 GHz). We performed controlled in vitro EMF exposures of metabolically labeled mammalian cells followed by reliable statistical analyses of differential protein- and pathway-level regulations using an array of established bioinformatics methods. Our results indicate that less than 1% of the quantitated human or mouse proteome responds to the EMFs by small changes in protein abundance. Further network-based analysis of the differentially regulated proteins did not detect significantly perturbed cellular processes or pathways in human and mouse cells in response to ELF, UMTS or WiFi exposure. In conclusion, our extensive bioinformatics analyses of semi-quantitative mass spectrometry data do not support the notion that the short-time exposures to non-ionizing EMFs have a consistent biologically significant bearing on mammalian cells in culture. PMID:28234898

Quantitative risk assessment system (QRAS)

NASA Technical Reports Server (NTRS)

Tan, Zhibin (Inventor); Mosleh, Ali (Inventor); Weinstock, Robert M (Inventor); Smidts, Carol S (Inventor); Chang, Yung-Hsien (Inventor); Groen, Francisco J (Inventor); Swaminathan, Sankaran (Inventor)

2001-01-01

A quantitative risk assessment system (QRAS) builds a risk model of a system for which risk of failure is being assessed, then analyzes the risk of the system corresponding to the risk model. The QRAS performs sensitivity analysis of the risk model by altering fundamental components and quantifications built into the risk model, then re-analyzes the risk of the system using the modifications. More particularly, the risk model is built by building a hierarchy, creating a mission timeline, quantifying failure modes, and building/editing event sequence diagrams. Multiplicities, dependencies, and redundancies of the system are included in the risk model. For analysis runs, a fixed baseline is first constructed and stored. This baseline contains the lowest level scenarios, preserved in event tree structure. The analysis runs, at any level of the hierarchy and below, access this baseline for risk quantitative computation as well as ranking of particular risks. A standalone Tool Box capability exists, allowing the user to store application programs within QRAS.

Assessment of and standardization for quantitative nondestructive test

NASA Technical Reports Server (NTRS)

Neuschaefer, R. W.; Beal, J. B.

1972-01-01

Present capabilities and limitations of nondestructive testing (NDT) as applied to aerospace structures during design, development, production, and operational phases are assessed. It will help determine what useful structural quantitative and qualitative data may be provided from raw materials to vehicle refurbishment. This assessment considers metal alloys systems and bonded composites presently applied in active NASA programs or strong contenders for future use. Quantitative and qualitative data has been summarized from recent literature, and in-house information, and presented along with a description of those structures or standards where the information was obtained. Examples, in tabular form, of NDT technique capabilities and limitations have been provided. NDT techniques discussed and assessed were radiography, ultrasonics, penetrants, thermal, acoustic, and electromagnetic. Quantitative data is sparse; therefore, obtaining statistically reliable flaw detection data must be strongly emphasized. The new requirements for reusable space vehicles have resulted in highly efficient design concepts operating in severe environments. This increases the need for quantitative NDT evaluation of selected structural components, the end item structure, and during refurbishment operations.

Quantitative systematic review of the associations between short-term exposure to nitrogen dioxide and mortality and hospital admissions.

PubMed

Mills, I C; Atkinson, R W; Kang, S; Walton, H; Anderson, H R

2015-05-11

Short-term exposure to NO₂ has been associated with adverse health effects and there is increasing concern that NO₂ is causally related to health effects, not merely a marker of traffic-generated pollution. No comprehensive meta-analysis of the time-series evidence on NO₂ has been published since 2007. To quantitatively assess the evidence from epidemiological time-series studies published worldwide to determine whether and to what extent short-term exposure to NO₂ is associated with increased numbers of daily deaths and hospital admissions. We conducted a quantitative systematic review of 204 time-series studies of NO₂ and daily mortality and hospital admissions for several diagnoses and ages, which were indexed in three bibliographic databases up to May 2011. We calculated random-effects estimates by different geographic regions and globally, and also tested for heterogeneity and small study bias. Sufficient estimates for meta-analysis were available for 43 cause-specific and age-specific combinations of mortality or hospital admissions (25 for 24 h NO₂ and 18 of the same combinations for 1 h measures). For the all-age group, a 10 µg/m(3) increase in 24 h NO₂ was associated with increases in all-cause, cardiovascular and respiratory mortality (0.71% (95% CI 0.43% to 1.00%), 0.88% (0.63% to 1.13%) and 1.09% (0.75% to 1.42%), respectively), and with hospital admissions for respiratory (0.57% (0.33% to 0.82%)) and cardiovascular (0.66% (0.32% to 1.01%)) diseases. Evidence of heterogeneity between geographical region-specific estimates was identified in more than half of the combinations analysed. Our review provides clear evidence of health effects associated with short-term exposure to NO₂ although further work is required to understand reasons for the regional heterogeneity observed. The growing literature, incorporating large multicentre studies and new evidence from less well-studied regions of the world, supports further quantitative

Integrated Environmental Modeling: Quantitative Microbial Risk Assessment

EPA Science Inventory

The presentation discusses the need for microbial assessments and presents a road map associated with quantitative microbial risk assessments, through an integrated environmental modeling approach. A brief introduction and the strengths of the current knowledge are illustrated. W...

Exposure Assessment Tools by Chemical Classes - Other Organics

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Lifestages and Populations - Lifestages

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Media - Water and Sediment

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Media - Soil and Dust

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Media - Soil and Dust

EPA Pesticide Factsheets

2017-02-13

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

An Upper Bound for Population Exposure Variability (SOT)

EPA Science Inventory

Tools for the rapid assessment of exposure potential are needed in order to put the results of rapidly-applied tools for assessing biological activity, such as ToxCast® and other high throughput methodologies, into a quantitative exposure context. The ExpoCast models (Wambaugh et...

Human exposure assessment resources on the World Wide Web.

PubMed

Schwela, Dieter; Hakkinen, Pertti J

2004-05-20

Human exposure assessment is frequently noted as a weak link and bottleneck in the risk assessment process. Fortunately, the World Wide Web and Internet are providing access to numerous valuable sources of human exposure assessment-related information, along with opportunities for information exchange. Internet mailing lists are available as potential online help for exposure assessment questions, e.g. RISKANAL has several hundred members from numerous countries. Various Web sites provide opportunities for training, e.g. Web sites offering general human exposure assessment training include two from the US Environmental Protection Agency (EPA) and four from the US National Library of Medicine. Numerous other Web sites offer access to a wide range of exposure assessment information. For example, the (US) Alliance for Chemical Awareness Web site addresses direct and indirect human exposures, occupational exposures and ecological exposure assessments. The US EPA's Exposure Factors Program Web site provides a focal point for current information and data on exposure factors relevant to the United States. In addition, the International Society of Exposure Analysis Web site provides information about how this society seeks to foster and advance the science of exposure analysis. A major opportunity exists for risk assessors and others to broaden the level of exposure assessment information available via Web sites. Broadening the Web's exposure information could include human exposure factors-related information about country- or region-specific ranges in body weights, drinking water consumption, etc. along with residential factors-related information on air changeovers per hour in various types of residences. Further, country- or region-specific ranges on how various tasks are performed by various types of consumers could be collected and provided. Noteworthy are that efforts are underway in Europe to develop a multi-country collection of exposure factors and the European

Retrospective Assessment of Occupational Exposures for the GENEVA Study of ALS among Military Veterans

PubMed Central

Woskie, Susan R.; Gore, Rebecca; Sandler, Dale P.; Schmidt, Silke; Kamel, Freya

2017-01-01

Abstract Objective: This paper describes the retrospective exposure assessment conducted to assess occupational exposures for the Genes and Environmental Exposures in Veterans (GENEVA) study, a case–control study investigating the joint contribution of genetics and environmental exposures to the risk of amyotrophic lateral sclerosis (ALS) among military veterans. Methods: Occupational histories for 1597 study participants collected as part of the GENEVA study were the basis for this retrospective exposure assessment. The data set included 15528 jobs held from 1924 to 2010, representing 4539 unique industry and occupation (I&O) combinations. Three industrial hygiene experts were recruited to independently rate occupational exposures to specific agents previously associated with an increased risk of ALS. Utilizing information on industry, job title, tasks performed, and materials used for each job held, raters assigned exposures associated with each I&O for the ‘current time’ defined as the period after 1995 (post-1995). The exposure assessment targeted agents identified as potential occupational risk factors for ALS. Experts rated semi-quantitatively exposure intensity in five exposure categories (0–4) for Group A agents (lead, formaldehyde, hydrocarbon solvents, and chlorinated solvents) and qualitatively as yes/no (1/0) exposed for Group B agents (mercury, selenium, arsenic, polychlorinated biphenyls, electromagnetic field, pesticides, and viral agents). Confidence scores (0–3) were reported for every I&O rated based on raters’ experience with that industry and/or job. Each I&O was assigned an average exposure score of the raters and an alternative exposure rating was developed for each I&O by excluding low confidence (<2) scores before averaging. Exposure reconstruction for jobs held pre-1995 was done by comparing exposure data extracted from the OSHA Chemical Exposure and Health Database (CEHD) during pre-1995 and post-1995. For agents with limited

Comparative Exposure Assessment of ESBL-Producing Escherichia coli through Meat Consumption

PubMed Central

Pielaat, Annemarie; Smid, Joost H.; van Duijkeren, Engeline; Vennemann, Francy B. C.; Wijnands, Lucas M.; Chardon, Jurgen E.

2017-01-01

The presence of extended-spectrum β-lactamase (ESBL) and plasmidic AmpC (pAmpC) producing Escherichia coli (EEC) in food animals, especially broilers, has become a major public health concern. The aim of the present study was to quantify the EEC exposure of humans in The Netherlands through the consumption of meat from different food animals. Calculations were done with a simplified Quantitative Microbiological Risk Assessment (QMRA) model. The model took the effect of pre-retail processing, storage at the consumers home and preparation in the kitchen (cross-contamination and heating) on EEC numbers on/in the raw meat products into account. The contribution of beef products (78%) to the total EEC exposure of the Dutch population through the consumption of meat was much higher than for chicken (18%), pork (4.5%), veal (0.1%) and lamb (0%). After slaughter, chicken meat accounted for 97% of total EEC load on meat, but chicken meat experienced a relatively large effect of heating during food preparation. Exposure via consumption of filet americain (a minced beef product consumed raw) was predicted to be highest (61% of total EEC exposure), followed by chicken fillet (13%). It was estimated that only 18% of EEC exposure occurred via cross-contamination during preparation in the kitchen, which was the only route by which EEC survived for surface-contaminated products. Sensitivity analysis showed that model output is not sensitive for most parameters. However, EEC concentration on meat other than chicken meat was an important data gap. In conclusion, the model assessed that consumption of beef products led to a higher exposure to EEC than chicken products, although the prevalence of EEC on raw chicken meat was much higher than on beef. The (relative) risk of this exposure for public health is yet unknown given the lack of a modelling framework and of exposure studies for other potential transmission routes. PMID:28056081

Human exposure assessment: a graduate level course

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lioy, P.J.

1991-07-01

The course has been offered three times. The content and the approach to each lecture has evolved after each time it was given. This is not unexpected since the field has been undergoing major transformations, and new approaches to measurement and modeling are being applied to current problems. The most recent student evaluation, 1990, indicates a difficulty rating of just right' (70%) to difficult' (30%). Most felt the course stimulated their interest in the topic (72%) and the examinations were learning experiences as well as a grading exercise. The major need for the discipline is an adequate text book. Themore » GRAPE program has excellent potential as an educational tool, but it needs to make more interactions and allow introduction of activities and data. The major strengths of the course are the problems provided to the students for homework. These give the student quantitative perspective on the concepts, range in values, variables, and uncertainties necessary to complete an assessment. In addition, the development of the mathematical and conceptional continuum for placing exposure assessment in the context of toxicology, environmental science, epidemiology, and clinical intervention provides a basic framework for the discipline.« less

Assessing the performance of the generalized propensity score for estimating the effect of quantitative or continuous exposures on binary outcomes

PubMed Central

2018-01-01

Propensity score methods are increasingly being used to estimate the effects of treatments and exposures when using observational data. The propensity score was initially developed for use with binary exposures. The generalized propensity score (GPS) is an extension of the propensity score for use with quantitative or continuous exposures (eg, dose or quantity of medication, income, or years of education). We used Monte Carlo simulations to examine the performance of different methods of using the GPS to estimate the effect of continuous exposures on binary outcomes. We examined covariate adjustment using the GPS and weighting using weights based on the inverse of the GPS. We examined both the use of ordinary least squares to estimate the propensity function and the use of the covariate balancing propensity score algorithm. The use of methods based on the GPS was compared with the use of G‐computation. All methods resulted in essentially unbiased estimation of the population dose‐response function. However, GPS‐based weighting tended to result in estimates that displayed greater variability and had higher mean squared error when the magnitude of confounding was strong. Of the methods based on the GPS, covariate adjustment using the GPS tended to result in estimates with lower variability and mean squared error when the magnitude of confounding was strong. We illustrate the application of these methods by estimating the effect of average neighborhood income on the probability of death within 1 year of hospitalization for an acute myocardial infarction. PMID:29508424

THE CHALLENGE OF ASSESSING CHILDREN'S EXPOSURE TO PESTICIDES

EPA Science Inventory

In implementing the Food Quality Protection Act (FQPA) the U.S. Environmental Protection Agency (USEPA) has adopted a policy that the exposure factors and models used to assess and predict exposure to pesticides should generally be conservative. Some elements of exposure assess...

Exposure assessment in health assessments for hand-arm vibration syndrome.

PubMed

Mason, H J; Poole, K; Young, C

2011-08-01

Assessing past cumulative vibration exposure is part of assessing the risk of hand-arm vibration syndrome (HAVS) in workers exposed to hand-arm vibration and invariably forms part of a medical assessment of such workers. To investigate the strength of relationships between the presence and severity of HAVS and different cumulative exposure metrics obtained from a self-reporting questionnaire. Cumulative exposure metrics were constructed from a tool-based questionnaire applied in a group of HAVS referrals and workplace field studies. These metrics included simple years of vibration exposure, cumulative total hours of all tool use and differing combinations of acceleration magnitudes for specific tools and their daily use, including the current frequency-weighting method contained in ISO 5349-1:2001. Use of simple years of exposure is a weak predictor of HAVS or its increasing severity. The calculation of cumulative hours across all vibrating tools used is a more powerful predictor. More complex calculations based on involving likely acceleration data for specific classes of tools, either frequency weighted or not, did not offer a clear further advantage in this dataset. This may be due to the uncertainty associated with workers' recall of their past tool usage or the variability between tools in the magnitude of their vibration emission. Assessing years of exposure or 'latency' in a worker should be replaced by cumulative hours of tool use. This can be readily obtained using a tool-pictogram-based self-reporting questionnaire and a simple spreadsheet calculation.

Associations between personal exposures and ambient concentrations of nitrogen dioxide: A quantitative research synthesis

NASA Astrophysics Data System (ADS)

Meng, Q. Y.; Svendsgaard, D.; Kotchmar, D. J.; Pinto, J. P.

2012-09-01

Although positive associations between ambient NO2 concentrations and personal exposures have generally been found by exposure studies, the strength of the associations varied among studies. Differences in results could be related to differences in study design and in exposure factors. However, the effects of study design, exposure factors, and sampling and measurement errors on the strength of the personal-ambient associations have not been evaluated quantitatively in a systematic manner. A quantitative research synthesis was conducted to examine these issues based on peer-reviewed publications in the past 30 years. Factors affecting the strength of the personal-ambient associations across the studies were also examined with meta-regression. Ambient NO2 was found to be significantly associated with personal NO2 exposures, with estimates of 0.42, 0.16, and 0.72 for overall pooled, longitudinal and daily average correlation coefficients based on random-effects meta-analysis. This conclusion was robust after correction for publication bias with correlation coefficients of 0.37, 0.16 and 0.45. We found that season and some population characteristics, such as pre-existing disease, were significant factors affecting the strength of the personal-ambient associations. More meaningful and rigorous comparisons would be possible if greater detail were published on the study design (e.g. local and indoor sources, housing characteristics, etc.) and data quality (e.g., detection limits and percent of data above detection limits).

Characterizing risk assessments for the development of occupational exposure limits for engineered nanomaterials.

PubMed

Schulte, P A; Kuempel, E D; Drew, N M

2018-06-01

The commercialization of engineered nanomaterials (ENMs) began in the early 2000's. Since then the number of commercial products and the number of workers potentially exposed to ENMs is growing, as is the need to evaluate and manage the potential health risks. Occupational exposure limits (OELs) have been developed for some of the first generation of ENMs. These OELs have been based on risk assessments that progressed from qualitative to quantitative as nanotoxicology data became available. In this paper, that progression is characterized. It traces OEL development through the qualitative approach of general groups of ENMs based primarily on read-across with other materials to quantitative risk assessments for nanoscale particles including titanium dioxide, carbon nanotubes and nanofibers, silver nanoparticles, and cellulose nanocrystals. These represent prototypic approaches to risk assessment and OEL development for ENMs. Such substance-by-substance efforts are not practical given the insufficient data for many ENMs that are currently being used or potentially entering commerce. Consequently, categorical approaches are emerging to group and rank ENMs by hazard and potential health risk. The strengths and limitations of these approaches are described, and future derivations and research needs are discussed. Critical needs in moving forward with understanding the health effects of the numerous EMNs include more standardized and accessible quantitative data on the toxicity and physicochemical properties of ENMs. Published by Elsevier Inc.

A tiered asthma hazard characterization and exposure assessment approach for evaluation of consumer product ingredients.

PubMed

Maier, Andrew; Vincent, Melissa J; Parker, Ann; Gadagbui, Bernard K; Jayjock, Michael

2015-12-01

Asthma is a complex syndrome with significant consequences for those affected. The number of individuals affected is growing, although the reasons for the increase are uncertain. Ensuring the effective management of potential exposures follows from substantial evidence that exposure to some chemicals can increase the likelihood of asthma responses. We have developed a safety assessment approach tailored to the screening of asthma risks from residential consumer product ingredients as a proactive risk management tool. Several key features of the proposed approach advance the assessment resources often used for asthma issues. First, a quantitative health benchmark for asthma or related endpoints (irritation and sensitization) is provided that extends qualitative hazard classification methods. Second, a parallel structure is employed to include dose-response methods for asthma endpoints and methods for scenario specific exposure estimation. The two parallel tracks are integrated in a risk characterization step. Third, a tiered assessment structure is provided to accommodate different amounts of data for both the dose-response assessment (i.e., use of existing benchmarks, hazard banding, or the threshold of toxicological concern) and exposure estimation (i.e., use of empirical data, model estimates, or exposure categories). Tools building from traditional methods and resources have been adapted to address specific issues pertinent to asthma toxicology (e.g., mode-of-action and dose-response features) and the nature of residential consumer product use scenarios (e.g., product use patterns and exposure durations). A case study for acetic acid as used in various sentinel products and residential cleaning scenarios was developed to test the safety assessment methodology. In particular, the results were used to refine and verify relationships among tiered approaches such that each lower data tier in the approach provides a similar or greater margin of safety for a given

Physiologic Basis for Understanding Quantitative Dehydration Assessment

DTIC Science & Technology

2012-01-01

Perspective Physiologic basis for understanding quantitative dehydration assessment1–4 Samuel N Cheuvront, Robert W Kenefick, Nisha Charkoudian, and...Michael N Sawka ABSTRACT Dehydration (body water deficit) is a physiologic state that can have profound implications for human health and performance...review the physiologic basis for understanding quantitative dehydration as- sessment. We highlight how phenomenologic interpretations of de- hydration

Occupational exposure assessment for crystalline silica dust: approach in Poland and worldwide.

PubMed

Maciejewska, Aleksandra

2008-01-01

Crystalline silica is a health hazard commonly encountered in work environment. Occupational exposure to crystalline silica dust concerns workers employed in such industries as mineral, fuel-energy, metal, chemical and construction industry. It is estimated that over 2 million workers in the European Union are exposed to crystalline silica. In Poland, over 50 thousand people work under conditions of silica dust exposure exceeding the occupational exposure limit. The assessment of occupational exposure to crystalline silica is a multi-phase process, primarily dependent on workplace measurements, quantitative analyses of samples, and comparison of results with respective standards. The present article summarizes the approaches to and methods used for assessment of exposure to crystalline silica as adopted in different countries in the EU and worldwide. It also compares the occupational limit values in force in almost 40 countries. Further, it points out the consequences resulting from the fact that IARC has regarded the two most common forms of crystalline silica: quartz and cristobalite as human carcinogens. The article includes an inter-country review of the methods used for air sample collection, dust concentration measurements, and determination of crystalline silica. The selection was based on the GESTIS database which lists the methods approved by the European Union for the measurements and tests regarding hazardous agents. Special attention has been paid to the methods of determining crystalline silica. The author attempts to analyze the influence of analytical techniques, sample preparation and the reference materials on determination results. Also the operating parameters of the method, including limit of detection, limit of quantification, and precision, have been compared.

Comprehensive assessment of exposures to elongate mineral particles in the taconite mining industry.

PubMed

Hwang, Jooyeon; Ramachandran, Gurumurthy; Raynor, Peter C; Alexander, Bruce H; Mandel, Jeffrey H

2013-10-01

Since the 1970s, concerns have been raised about elevated rates of mesothelioma in the vicinity of the taconite mines in the Mesabi Iron Range. However, insufficient quantitative exposure data have hampered investigations of the relationship between cumulative exposures to elongate mineral particles (EMP) in taconite dust and adverse health effects. Specifically, no research on exposure to taconite dust, which includes EMP, has been conducted since 1990. This article describes a comprehensive assessment of present-day exposures to total and amphibole EMP in the taconite mining industry. Similar exposure groups (SEGs) were established to assess present-day exposure levels and buttress the sparse historical data. Personal samples were collected to assess the present-day levels of worker exposures to EMP at six mines in the Mesabi Iron Range. The samples were analyzed using National Institute for Occupational Safety and Health (NIOSH) methods 7400 and 7402. For many SEGs in several mines, the exposure levels of total EMP were higher than the NIOSH Recommended Exposure Limit (REL). However, the total EMP classification includes not only the asbestiform EMP and their non-asbestiform mineral analogs but also other minerals because the NIOSH 7400 cannot differentiate between these. The concentrations of amphibole EMP were well controlled across all mines and were much lower than the concentrations of total EMP, indicating that amphibole EMP are not major components of taconite EMP. The levels are also well below the NIOSH REL of 0.1 EMP cc(-1). Two different approaches were used to evaluate the variability of exposure between SEGs, between workers, and within workers. The related constructs of contrast and homogeneity were calculated to characterize the SEGs. Contrast, which is a ratio of between-SEG variability to the sum of between-SEG and between-worker variability, provides an overall measure of whether there are distinctions between the SEGs. Homogeneity, which is

Quantitative olfactory disorders and occupational exposure to phenolic resins.

PubMed

Riccó, Matteo; Signorelli, Carlo; Pistelli, Enrico; Cattani, Silvia

To investigate whether exposure to phenolic resins (PR) is associated with quantitative olfactory disorders (QOD), a cross-sectional study of self-reported olfactory impairment (SROI) was performed in occupationally exposed subjects. Sixty-six workers (45 males, 21 females) at the age (mean ± standard deviation) of 39.8±10.15 years old were divided into 3 exposure groups on the basis of biological exposure indices (BEI) for urinary phenols. It was asked whether the sense of smell has been normal or abnormal during the recent 2 months: the participants were eventually divided into self-reported normosmic, hyposmic, hyperosmic groups. Prevalence of the SROI was 45.5%, with 21 (31.8%) workers complaining about the hyposmia, 12 (18.2%) - anosmia and 9 (13.6%) - hyperosmia. In univariate analyses, female sex was associated with the SROI and the hyperosmia. Highly exposed workers showed the SROI more frequently (odds ratio (OR) = 4.714; 95% confidence interval (CI): 1.077-20.626) than those not exposed (reference) or low exposed (OR = 1.333; 95% CI: 0.416-4.274). In multivariate analyses, female sex was the main risk factor for the SROI (adjusted odds ratio (ORa) = 5.622; 95% CI: 1.525-20.722) and the hyperosmia (ORa = 25.143; 95% CI: 2.379-265.7) but a high exposure to phenol (ORa = 11.133; 95% CI: 1.060-116.9) was the main risk factor for the anosmia. This study has found slight evidence among the cross-section of chemical industry workers that the exposure to phenol may be associated with the SROI. On the other hand, self-reporting of the QOD may be biased by personal factors and further research with objective measurement is therefore required. Med Pr 2016;67(2):173-186. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Knowledge gaps in host-parasite interaction preclude accurate assessment of meat-borne exposure to Toxoplasma gondii.

PubMed

Crotta, M; Limon, G; Blake, D P; Guitian, J

2017-11-16

Toxoplasma gondii is recognized as a widely prevalent zoonotic parasite worldwide. Although several studies clearly identified meat products as an important source of T. gondii infections in humans, quantitative understanding of the risk posed to humans through the food chain is surprisingly scant. While probabilistic risk assessments for pathogens such as Campylobacter jejuni, Listeria monocytogenes or Escherichia coli have been well established, attempts to quantify the probability of human exposure to T. gondii through consumption of food products of animal origin are at early stages. The biological complexity of the life cycle of T. gondii and limited understanding of several fundamental aspects of the host/parasite interaction, require the adoption of numerous critical assumptions and significant simplifications. In this study, we present a hypothetical quantitative model for the assessment of human exposure to T. gondii through meat products. The model has been conceptualized to capture the dynamics leading to the presence of parasite in meat and, for illustrative purposes, used to estimate the probability of at least one viable cyst occurring in 100g of fresh pork meat in England. Available data, including the results of a serological survey in pigs raised in England were used as a starting point to implement a probabilistic model and assess the fate of the parasite along the food chain. Uncertainty distributions were included to describe and account for the lack of knowledge where necessary. To quantify the impact of the key model inputs, sensitivity and scenario analyses were performed. The overall probability of 100g of a hypothetical edible tissue containing at least 1 cyst was 5.54%. Sensitivity analysis indicated that the variables exerting the greater effect on the output mean were the number of cysts and number of bradyzoites per cyst. Under the best and the worst scenarios, the probability of a single portion of fresh pork meat containing at least 1

QUANTITATIVE PROCEDURES FOR NEUROTOXICOLOGY RISK ASSESSMENT

EPA Science Inventory

In this project, previously published information on biologically based dose-response model for brain development was used to quantitatively evaluate critical neurodevelopmental processes, and to assess potential chemical impacts on early brain development. This model has been ex...

Preparation and performance features of wristband samplers and considerations for chemical exposure assessment

PubMed Central

Anderson, Kim A; Points, Gary L; Donald, Carey E; Dixon, Holly M; Scott, Richard P; Wilson, Glenn; Tidwell, Lane G; Hoffman, Peter D; Herbstman, Julie B; O'Connell, Steven G

2017-01-01

Wristbands are increasingly used for assessing personal chemical exposures. Unlike some exposure assessment tools, guidelines for wristbands, such as preparation, applicable chemicals, and transport and storage logistics, are lacking. We tested the wristband’s capacity to capture and retain 148 chemicals including polychlorinated biphenyls (PCBs), pesticides, flame retardants, polycyclic aromatic hydrocarbons (PAHs), and volatile organic chemicals (VOCs). The chemicals span a wide range of physical–chemical properties, with log octanol–air partitioning coefficients from 2.1 to 13.7. All chemicals were quantitatively and precisely recovered from initial exposures, averaging 102% recovery with relative SD ≤21%. In simulated transport conditions at +30 °C, SVOCs were stable up to 1 month (average: 104%) and VOC levels were unchanged (average: 99%) for 7 days. During long-term storage at −20 °C up to 3 (VOCs) or 6 months (SVOCs), all chemical levels were stable from chemical degradation or diffusional losses, averaging 110%. Applying a paired wristband/active sampler study with human participants, the first estimates of wristband–air partitioning coefficients for PAHs are presented to aid in environmental air concentration estimates. Extrapolation of these stability results to other chemicals within the same physical–chemical parameters is expected to yield similar results. As we better define wristband characteristics, wristbands can be better integrated in exposure science and epidemiological studies. PMID:28745305

Assessments of direct human exposure: the approach of EU risk assessments compared to scenario-based risk assessment.

PubMed

Wormuth, Matthias; Demou, Evangelia; Scheringer, Martin; Hungerbühler, Konrad

2007-08-01

The awareness of potential risks emerging from the use of chemicals in all parts of daily life has increased the need for risk assessments that are able to cover a high number of exposure situations and thereby ensure the safety of workers and consumers. In the European Union (EU), the practice of risk assessments for chemicals is laid down in a Technical Guidance Document; it is designed to consider environmental and human occupational and residential exposure. Almost 70 EU risk assessment reports (RARs) have been finalized for high-production-volume chemicals during the last decade. In the present study, we analyze the assessment of occupational and consumer exposure to trichloroethylene and phthalates presented in six EU RARs. Exposure scenarios in these six RARs were compared to scenarios used in applications of the scenario-based risk assessment approach to the same set of chemicals. We find that scenarios used in the selected EU RARs to represent typical exposure situations in occupational or private use of chemicals and products do not necessarily represent worst-case conditions. This can be due to the use of outdated information on technical equipment and conditions in workplaces or omission of pathways that can cause consumer exposure. Considering the need for exposure and risk assessments under the new chemicals legislation of the EU, we suggest that a transparent process of collecting data on exposure situations and of generating representative exposure scenarios is implemented to improve the accuracy of risk assessments. Also, the data sets used to assess human exposure should be harmonized, summarized in a transparent fashion, and made accessible for all risk assessors and the public.

Assessing the performance of the generalized propensity score for estimating the effect of quantitative or continuous exposures on binary outcomes.

PubMed

Austin, Peter C

2018-05-20

Propensity score methods are increasingly being used to estimate the effects of treatments and exposures when using observational data. The propensity score was initially developed for use with binary exposures. The generalized propensity score (GPS) is an extension of the propensity score for use with quantitative or continuous exposures (eg, dose or quantity of medication, income, or years of education). We used Monte Carlo simulations to examine the performance of different methods of using the GPS to estimate the effect of continuous exposures on binary outcomes. We examined covariate adjustment using the GPS and weighting using weights based on the inverse of the GPS. We examined both the use of ordinary least squares to estimate the propensity function and the use of the covariate balancing propensity score algorithm. The use of methods based on the GPS was compared with the use of G-computation. All methods resulted in essentially unbiased estimation of the population dose-response function. However, GPS-based weighting tended to result in estimates that displayed greater variability and had higher mean squared error when the magnitude of confounding was strong. Of the methods based on the GPS, covariate adjustment using the GPS tended to result in estimates with lower variability and mean squared error when the magnitude of confounding was strong. We illustrate the application of these methods by estimating the effect of average neighborhood income on the probability of death within 1 year of hospitalization for an acute myocardial infarction. © 2018 The Authors. Statistics in Medicine published by John Wiley & Sons Ltd.

QUANTITATIVE PESTICIDE EXPOSURE ASSESSMENT OF CHILDREN LIVING IN AN AGRICULTURAL COMMUNITY

EPA Science Inventory

In support of planning efforts for the National Children's Study, we conducted a pilot study to test field methods characterizing pesticide exposures to 20 farmworker children aged 6-24 months living in the Salinas Valley, Monterey County, California. Sample collection included d...

Exploring Global Exposure Factors Resources for Use in Consumer Exposure Assessments

EPA Science Inventory

This publication serves as a global comprehensive resource for readers seeking exposure factor data and information relevant to consumer exposure assessment. It describes the types of information that may be found in various official surveys and online and published resources. Th...

Estimating exposures in the asphalt industry for an international epidemiological cohort study of cancer risk.

PubMed

Burstyn, Igor; Boffetta, Paolo; Kauppinen, Timo; Heikkilä, Pirjo; Svane, Ole; Partanen, Timo; Stücker, Isabelle; Frentzel-Beyme, Rainer; Ahrens, Wolfgang; Merzenich, Hiltrud; Heederik, Dick; Hooiveld, Mariëtte; Langård, Sverre; Randem, Britt G; Järvholm, Bengt; Bergdahl, Ingvar; Shaham, Judith; Ribak, Joseph; Kromhout, Hans

2003-01-01

An exposure matrix (EM) for known and suspected carcinogens was required for a multicenter international cohort study of cancer risk and bitumen among asphalt workers. Production characteristics in companies enrolled in the study were ascertained through use of a company questionnaire (CQ). Exposures to coal tar, bitumen fume, organic vapor, polycyclic aromatic hydrocarbons, diesel fume, silica, and asbestos were assessed semi-quantitatively using information from CQs, expert judgment, and statistical models. Exposures of road paving workers to bitumen fume, organic vapor, and benzo(a)pyrene were estimated quantitatively by applying regression models, based on monitoring data, to exposure scenarios identified by the CQs. Exposures estimates were derived for 217 companies enrolled in the cohort, plus the Swedish asphalt paving industry in general. Most companies were engaged in road paving and asphalt mixing, but some also participated in general construction and roofing. Coal tar use was most common in Denmark and The Netherlands, but the practice is now obsolete. Quantitative estimates of exposure to bitumen fume, organic vapor, and benzo(a)pyrene for pavers, and semi-quantitative estimates of exposure to these agents among all subjects were strongly correlated. Semi-quantitative estimates of exposure to bitumen fume and coal tar exposures were only moderately correlated. EM assessed non-monotonic historical decrease in exposures to all agents assessed except silica and diesel exhaust. We produced a data-driven EM using methodology that can be adapted for other multicenter studies. Copyright 2003 Wiley-Liss, Inc.

Temporary Blinding Limits versus Maximum Permissible Exposure - A Paradigm Change in Risk Assessment for Visible Optical Radiation

NASA Astrophysics Data System (ADS)

Reidenbach, Hans-Dieter

Safety considerations in the field of laser radiation have traditionally been restricted to maximum permissible exposure levels defined as a function of wavelength and exposure duration. But in Europe according to the European Directive 2006/25/EC on artificial optical radiation the employer has to include in his risk assessment indirect effects from temporary blinding. Whereas sufficient knowledge on various deterministic risks exists, only sparse quantitative data is available for the impairment of visual functions due to temporary blinding from visible optical radiation. The consideration of indirect effects corresponds to a paradigm change in risk assessment when situations have to be treated, where intrabeam viewing of low-power laser radiation is likely or other non-coherent visible radiation might influence certain visual tasks. In order to obtain a sufficient basis for the assessment of certain situations, investigations of the functional relationships between wavelength, exposure time and optical power and the resulting interference on visual functions have been performed and the results are reported. The duration of a visual disturbance is thus predictable. In addition, preliminary information on protective measures is given.

Potential Dermal Exposure to Flonicamid and Risk Assessment of Applicators During Treatment in Apple Orchards.

PubMed

Zhao, Mei-Ai; Yu, Aili; Zhu, Yong-Zhe; Kim, Jeong-Han

2015-01-01

Exposure and risk assessments of flonicamid for applicators were performed in apple orchards in Korea. Fifteen experiments were done with two experienced applicators under typical field conditions using a speed sprayer. In this study, cotton gloves, socks, masks, and dermal patches were used to monitor potential dermal exposure to flonicamid, and personal air samplers with XAD-2 resin and glass fiber filter were used to monitor potential inhalation exposure. The analytical methods were validated for the limit of detection, limit of quantitation, reproducibility, linearity of the calibration curve, and recovery of flonicamid from various exposure matrices. The results were encouraging and acceptable for an exposure study. The applicability of XAD-2 resin was evaluated via a trapping efficiency and breakthrough test. During the mixing/loading, the average total dermal exposure was 22.6 μg of flonicamid, corresponding to 4.5×10(-5)% of the prepared amount. For the spraying, the potential dermal exposure was 9.32 mg, and the ratio to applied amount was 1.9 × 10(-2%). The primary exposed body parts were the thigh (2.90 mg), upper arm (1.75 mg), and lower leg (1.66 mg). By comparison, absorbable quantity of exposure was small, only 1.62 μg (3.2×10(-6)%). The margin of safety (MOS) were calculated for risk assessment, in all sets of trials, MOS > 1, indicating the exposure level of flonicamid was considered to be safe in apple orchards. Although this was a limited study, it provided a good estimate of flonicamid exposure for orchard applicators.

Hypertension and Exposure to Noise near Airports (HYENA): study design and noise exposure assessment.

PubMed

Jarup, Lars; Dudley, Marie-Louise; Babisch, Wolfgang; Houthuijs, Danny; Swart, Wim; Pershagen, Göran; Bluhm, Gösta; Katsouyanni, Klea; Velonakis, Manolis; Cadum, Ennio; Vigna-Taglianti, Federica

2005-11-01

An increasing number of people live near airports with considerable noise and air pollution. The Hypertension and Exposure to Noise near Airports (HYENA) project aims to assess the impact of airport-related noise exposure on blood pressure (BP) and cardiovascular disease using a cross-sectional study design. We selected 6,000 persons (45-70 years of age) who had lived at least 5 years near one of six major European airports. We used modeled aircraft noise contours, aiming to maximize exposure contrast. Automated BP instruments are used to reduce observer error. We designed a standardized questionnaire to collect data on annoyance, noise disturbance, and major confounders. Cortisol in saliva was collected in a subsample of the study population (n = 500) stratified by noise exposure level. To investigate short-term noise effects on BP and possible effects on nighttime BP dipping, we measured 24-hr BP and assessed continuous night noise in another subsample (n = 200). To ensure comparability between countries, we used common noise models to assess individual noise exposure, with a resolution of 1 dB(A). Modifiers of individual exposure, such as the orientation of living and bedroom toward roads, window-opening habits, and sound insulation, were assessed by the questionnaire. For four airports, we estimated exposure to air pollution to explore modifying effects of air pollution on cardiovascular disease. The project assesses exposure to traffic-related air pollutants, primarily using data from another project funded by the European Union (APMoSPHERE, Air Pollution Modelling for Support to Policy on Health and Environmental Risks in Europe).

The Diesel Exhaust in Miners Study: I. Overview of the Exposure Assessment Process

PubMed Central

Stewart, Patricia A.; Coble, Joseph B.; Vermeulen, Roel; Schleiff, Patricia; Blair, Aaron; Lubin, Jay; Attfield, Michael; Silverman, Debra T.

2010-01-01

This report provides an overview of the exposure assessment process for an epidemiologic study that investigated mortality, with a special focus on lung cancer, associated with diesel exhaust (DE) exposure among miners. Details of several components are provided in four other reports. A major challenge for this study was the development of quantitative estimates of historical exposures to DE. There is no single standard method for assessing the totality of DE, so respirable elemental carbon (REC), a component of DE, was selected as the primary surrogate in this study. Air monitoring surveys at seven of the eight study mining facilities were conducted between 1998 and 2001 and provided reference personal REC exposure levels and measurements for other agents and DE components in the mining environment. (The eighth facility had closed permanently prior to the surveys.) Exposure estimates were developed for mining facility/department/job/year combinations. A hierarchical grouping strategy was developed for assigning exposure levels to underground jobs [based on job titles, on the amount of time spent in various areas of the underground mine, and on similar carbon monoxide (CO, another DE component) concentrations] and to surface jobs (based on the use of, or proximity to, diesel-powered equipment). Time trends in air concentrations for underground jobs were estimated from mining facility-specific prediction models using diesel equipment horsepower, total air flow rates exhausted from the underground mines, and, because there were no historical REC measurements, historical measurements of CO. Exposures to potentially confounding agents, i.e. respirable dust, silica, radon, asbestos, and non-diesel sources of polycyclic aromatic hydrocarbons, also were assessed. Accuracy and reliability of the estimated REC exposures levels were evaluated by comparison with several smaller datasets and by development of alternative time trend models. During 1998–2001, the average

The diesel exhaust in miners study: I. Overview of the exposure assessment process.

PubMed

Stewart, Patricia A; Coble, Joseph B; Vermeulen, Roel; Schleiff, Patricia; Blair, Aaron; Lubin, Jay; Attfield, Michael; Silverman, Debra T

2010-10-01

This report provides an overview of the exposure assessment process for an epidemiologic study that investigated mortality, with a special focus on lung cancer, associated with diesel exhaust (DE) exposure among miners. Details of several components are provided in four other reports. A major challenge for this study was the development of quantitative estimates of historical exposures to DE. There is no single standard method for assessing the totality of DE, so respirable elemental carbon (REC), a component of DE, was selected as the primary surrogate in this study. Air monitoring surveys at seven of the eight study mining facilities were conducted between 1998 and 2001 and provided reference personal REC exposure levels and measurements for other agents and DE components in the mining environment. (The eighth facility had closed permanently prior to the surveys.) Exposure estimates were developed for mining facility/department/job/year combinations. A hierarchical grouping strategy was developed for assigning exposure levels to underground jobs [based on job titles, on the amount of time spent in various areas of the underground mine, and on similar carbon monoxide (CO, another DE component) concentrations] and to surface jobs (based on the use of, or proximity to, diesel-powered equipment). Time trends in air concentrations for underground jobs were estimated from mining facility-specific prediction models using diesel equipment horsepower, total air flow rates exhausted from the underground mines, and, because there were no historical REC measurements, historical measurements of CO. Exposures to potentially confounding agents, i.e. respirable dust, silica, radon, asbestos, and non-diesel sources of polycyclic aromatic hydrocarbons, also were assessed. Accuracy and reliability of the estimated REC exposures levels were evaluated by comparison with several smaller datasets and by development of alternative time trend models. During 1998-2001, the average

Perspectives for integrating human and environmental exposure assessments.

PubMed

Ciffroy, P; Péry, A R R; Roth, N

2016-10-15

Integrated Risk Assessment (IRA) has been defined by the EU FP7 HEROIC Coordination action as "the mutual exploitation of Environmental Risk Assessment for Human Health Risk Assessment and vice versa in order to coherently and more efficiently characterize an overall risk to humans and the environment for better informing the risk analysis process" (Wilks et al., 2015). Since exposure assessment and hazard characterization are the pillars of risk assessment, integrating Environmental Exposure assessment (EEA) and Human Exposure assessment (HEA) is a major component of an IRA framework. EEA and HEA typically pursue different targets, protection goals and timeframe. However, human and wildlife species also share the same environment and they similarly inhale air and ingest water and food through often similar overlapping pathways of exposure. Fate models used in EEA and HEA to predict the chemicals distribution among physical and biological media are essentially based on common properties of chemicals, and internal concentration estimations are largely based on inter-species (i.e. biota-to-human) extrapolations. Also, both EEA and HEA are challenged by increasing scientific complexity and resources constraints. Altogether, these points create the need for a better exploitation of all currently existing data, experimental approaches and modeling tools and it is assumed that a more integrated approach of both EEA and HEA may be part of the solution. Based on the outcome of an Expert Workshop on Extrapolations in Integrated Exposure Assessment organized by the HEROIC project in January 2014, this paper identifies perspectives and recommendations to better harmonize and extrapolate exposure assessment data, models and methods between Human Health and Environmental Risk Assessments to support the further development and promotion of the concept of IRA. Ultimately, these recommendations may feed into guidance showing when and how to apply IRA in the regulatory decision

Environmental tobacco smoke exposure assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guerin, M.R.

Environmental tobacco smoke (ETS) is the material released into the environment as tobacco products are smoked. Cigarettes, pipes, and cigars all produce ETS but the term has become all but synonymous with indoor air contamination by cigarette smoking. This is because cigarettes are by far the most commonly consumed tobacco product and because the principal human exposure occurs indoors. Exposure to ETS is variously termed as passive smoking, involuntary smoking, and as exposure to second-hand smoke. Considerable progress has been made toward a better understanding of ETS exposure. Strengths and limitations of various measures of exposure are better understood andmore » much data has been generated on the quantities of many ETS-constituents in many indoor environments. The properties of ETS, methods for its measurement in indoor air, and many results of field studies have recently been reviewed by the author. The recent EPA report includes a major treatment of exposure estimation including air concentrations, questionnaires, and biomarkers. This paper discusses approaches to exposure assessment and summarizes data on indoor air concentrations of ETS-constituents.« less

Physiologic basis for understanding quantitative dehydration assessment.

PubMed

Cheuvront, Samuel N; Kenefick, Robert W; Charkoudian, Nisha; Sawka, Michael N

2013-03-01

Dehydration (body water deficit) is a physiologic state that can have profound implications for human health and performance. Unfortunately, dehydration can be difficult to assess, and there is no single, universal gold standard for decision making. In this article, we review the physiologic basis for understanding quantitative dehydration assessment. We highlight how phenomenologic interpretations of dehydration depend critically on the type (dehydration compared with volume depletion) and magnitude (moderate compared with severe) of dehydration, which in turn influence the osmotic (plasma osmolality) and blood volume-dependent compensatory thresholds for antidiuretic and thirst responses. In particular, we review new findings regarding the biological variation in osmotic responses to dehydration and discuss how this variation can help provide a quantitative and clinically relevant link between the physiology and phenomenology of dehydration. Practical measures with empirical thresholds are provided as a starting point for improving the practice of dehydration assessment.

Exposure Assessment Tools by Lifestages and Populations - General Population

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Lifestages and Populations - Occupational Workers

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Lifestages and Populations - Residential Consumers

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Chemical Classes - Inorganics and Fibers

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Quantitative assessment of risk reduction from hand washing with antibacterial soaps.

PubMed

Gibson, L L; Rose, J B; Haas, C N; Gerba, C P; Rusin, P A

2002-01-01

The Centers for Disease Control and Prevention have estimated that there are 3,713,000 cases of infectious disease associated with day care facilities each year. The objective of this study was to examine the risk reduction achieved from using different soap formulations after diaper changing using a microbial quantitative risk assessment approach. To achieve this, a probability of infection model and an exposure assessment based on micro-organism transfer were used to evaluate the efficacy of different soap formulations in reducing the probability of disease following hand contact with an enteric pathogen. Based on this model, it was determined that the probability of infection ranged from 24/100 to 91/100 for those changing diapers of babies with symptomatic shigellosis who used a control product (soap without an antibacterial ingredient), 22/100 to 91/100 for those who used an antibacterial soap (chlorohexadine 4%), and 15/100 to 90/100 for those who used a triclosan (1.5%) antibacterial soap. Those with asymptomatic shigellosis who used a non-antibacterial control soap had a risk between 49/100,000 and 53/100, those who used the 4% chlorohexadine-containing soap had a risk between 43/100,000 and 51/100, and for those who used a 1.5% triclosan soap had a risk between 21/100,000 and 43/100. The adequate washing of hands after diapering reduces risk and can be further reduced by a factor of 20% by the use of an antibacterial soap. Quantitative risk assessment is a valuable tool in the evaluation of household sanitizing agents and low risk outcomes.

Long-term exposure to ambient ozone and mortality: a quantitative systematic review and meta-analysis of evidence from cohort studies.

PubMed

Atkinson, R W; Butland, B K; Dimitroulopoulou, C; Heal, M R; Stedman, J R; Carslaw, N; Jarvis, D; Heaviside, C; Vardoulakis, S; Walton, H; Anderson, H R

2016-02-23

While there is good evidence for associations between short-term exposure to ozone and a range of adverse health outcomes, the evidence from narrative reviews for long-term exposure is suggestive of associations with respiratory mortality only. We conducted a systematic, quantitative evaluation of the evidence from cohort studies, reporting associations between long-term exposure to ozone and mortality. Cohort studies published in peer-reviewed journals indexed in EMBASE and MEDLINE to September 2015 and PubMed to October 2015 and cited in reviews/key publications were identified via search strings using terms relating to study design, pollutant and health outcome. Study details and estimate information were extracted and used to calculate standardised effect estimates expressed as HRs per 10 ppb increment in long-term ozone concentrations. 14 publications from 8 cohorts presented results for ozone and all-cause and cause-specific mortality. We found no evidence of associations between long-term annual O3 concentrations and the risk of death from all causes, cardiovascular or respiratory diseases, or lung cancer. 4 cohorts assessed ozone concentrations measured during the warm season. Summary HRs for cardiovascular and respiratory causes of death derived from 3 cohorts were 1.01 (95% CI 1.00 to 1.02) and 1.03 (95% CI 1.01 to 1.05) per 10 ppb, respectively. Our quantitative review revealed a paucity of independent studies regarding the associations between long-term exposure to ozone and mortality. The potential impact of climate change and increasing anthropogenic emissions of ozone precursors on ozone levels worldwide suggests further studies of the long-term effects of exposure to high ozone levels are warranted. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Exposure Assessment Tools by Approaches - Indirect Estimation (Scenario Evaluation)

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases, mode

Risk assessment of local dermal effects and skin sensitisation under the EU Chemicals Regulation REACH: a proposal for a qualitative, exposure scenario specific, approach.

PubMed

Schaafsma, G; Hertsenberg, A J; Marquart, J

2011-08-01

Within the framework of REACH, an assessment regarding local dermal effects and skin sensitisation should be performed for substances. Quantitative hazard information for these effects is often not available. Furthermore, it is difficult to relate the way in which animals are exposed in dermal toxicity studies directly to dermal exposure in practice. In the absence of quantitative information, a qualitative assessment for dermal effects is the most reasonable option. The qualitative approach as proposed in the REACH guidance recommends only general risk management measures (RMM) for three categories with a low, moderate and high identified hazard, without specifying which RMM are needed for a specific exposure scenario. We propose to differentiate frequency of exposure based on differences in activities and to compare measured and estimated local skin exposure levels with rules of thumb for evaluation of control of risks per hazard category. For workers, specific RMM regimes are assigned to each combination of hazard category and process category (PROC). For consumers, a strategy in which RMM are arranged from product-integrated measures to the use of personal protective equipment (PPE) is presented. Our approach may be transferred into automated assessment tools like Chesar and CEFIC GES. Copyright © 2011 Elsevier Inc. All rights reserved.

Multiple pathway asbestos exposure assessment for a Superfund community.

PubMed

Noonan, Curtis W; Conway, Kathrene; Landguth, Erin L; McNew, Tracy; Linker, Laura; Pfau, Jean; Black, Brad; Szeinuk, Jaime; Flores, Raja

2015-01-01

Libby, MT, USA, was the home to workers at a historical vermiculite mining facility and served as the processing and distribution center for this industrial product that was contaminated with amphibole asbestos. Several pathways of environmental asbestos exposure to the general population have been identified. The local clinic and health screening program collects data from participants on past occupational and environmental exposures to vermiculite and asbestos. Health studies among this population have demonstrated associations between amphibole exposure and health outcomes, but critical questions regarding the nature and level of exposure associated with specific outcomes remain unanswered. The objective of this study was to develop a comprehensive exposure assessment approach that integrates information on individuals' contact frequency with multiple exposure pathways. For 3031 participants, we describe cumulative exposure metrics for environmental exposures, occupational exposures, and residents' contact with carry-home asbestos from household workers. As expected, cumulative exposures for all three occupational categories were higher among men compared with women, and cumulative exposures for household contact and environmental pathways were higher among women. The comprehensive exposure assessment strategies will advance health studies and risk assessment approaches in this population with a complex history of both occupational and environmental asbestos exposure.

Migration of silver from commercial plastic food containers and implications for consumer exposure assessment.

PubMed

von Goetz, Natalie; Fabricius, Lars; Glaus, Reto; Weitbrecht, Volker; Günther, Detlef; Hungerbühler, Konrad

2013-01-01

Food storage containers with embedded silver as an antibacterial agent promise longer durability of food. For risk assessment the release of this silver into the stored food and resulting human exposure need to be known. For the purpose of exposure assessment, silver migration from commercial plastic containers with declared content of 'nano-' or 'micro-silver' into different food simulants (water, 10% ethanol, 3% acetic acid, olive oil) was quantitatively determined by ICP-MS and the form of the released silver was investigated. The highest migration of silver was observed for the acidic food simulant with 30 ng silver cm(-2) contact surface within 10 days at 20°C. In a second and third use cycle, migration dropped by a factor of up to 10, so that the maximum cumulated release over three use cycles was 34 ng cm(-2). The silver release over time was described using a power function and a numerical model that simulates Fickian diffusion through the plastic material. The released silver was found to be in ionic form, but also in the form of silver nanoparticles (around 12%). Consumer exposure to the total amount of silver released from the food containers is low in comparison with the background silver exposure of the general population, but since natural background concentrations are only known for ionic silver, the exposure to silver nanoparticles is not directly comparable with a safe background level.

Variability in PAH-DNA adduct measurements in peripheral mononuclear cells: implications for quantitative cancer risk assessment.

PubMed

Dickey, C; Santella, R M; Hattis, D; Tang, D; Hsu, Y; Cooper, T; Young, T L; Perera, F P

1997-10-01

Biomarkers such as DNA adducts have significant potential to improve quantitative risk assessment by characterizing individual differences in metabolism of genotoxins and DNA repair and accounting for some of the factors that could affect interindividual variation in cancer risk. Inherent uncertainty in laboratory measurements and within-person variability of DNA adduct levels over time are putatively unrelated to cancer risk and should be subtracted from observed variation to better estimate interindividual variability of response to carcinogen exposure. A total of 41 volunteers, both smokers and nonsmokers, were asked to provide a peripheral blood sample every 3 weeks for several months in order to specifically assess intraindividual variability of polycyclic aromatic hydrocarbon (PAH)-DNA adduct levels. The intraindividual variance in PAH-DNA adduct levels, together with measurement uncertainty (laboratory variability and unaccounted for differences in exposure), constituted roughly 30% of the overall variance. An estimated 70% of the total variance was contributed by interindividual variability and is probably representative of the true biologic variability of response to carcinogenic exposure in lymphocytes. The estimated interindividual variability in DNA damage after subtracting intraindividual variability and measurement uncertainty was 24-fold. Inter-individual variance was higher (52-fold) in persons who constitutively lack the Glutathione S-Transferase M1 (GSTM1) gene which is important in the detoxification pathway of PAH. Risk assessment models that do not consider the variability of susceptibility to DNA damage following carcinogen exposure may underestimate risks to the general population, especially for those people who are most vulnerable.

Quantitative MRI assessments of white matter in children treated for acute lymphoblastic leukemia

NASA Astrophysics Data System (ADS)

Reddick, Wilburn E.; Glass, John O.; Helton, Kathleen J.; Li, Chin-Shang; Pui, Ching-Hon

2005-04-01

The purpose of this study was to use objective quantitative MR imaging methods to prospectively assess changes in the physiological structure of white matter during the temporal evolution of leukoencephalopathy (LE) in children treated for acute lymphoblastic leukemia. The longitudinal incidence, extent (proportion of white matter affect), and intensity (elevation of T1 and T2 relaxation rates) of LE was evaluated for 44 children. A combined imaging set consisting of T1, T2, PD, and FLAIR MR images and white matter, gray matter and CSF a priori maps from a spatially normalized atlas were analyzed with a neural network segmentation based on a Kohonen Self-Organizing Map (SOM). Quantitative T1 and T2 relaxation maps were generated using a nonlinear parametric optimization procedure to fit the corresponding multi-exponential models. A Cox proportional regression was performed to estimate the effect of intravenous methotrexate (IV-MTX) exposure on the development of LE followed by a generalized linear model to predict the probability of LE in new patients. Additional T-tests of independent samples were performed to assess differences in quantitative measures of extent and intensity at four different points in therapy. Higher doses and more courses of IV-MTX placed patients at a higher risk of developing LE and were associated with more intense changes affecting more of the white matter volume; many of the changes resolved after completion of therapy. The impact of these changes on neurocognitive functioning and quality of life in survivors remains to be determined.

Assessment of human exposure to polychlorinated dibenzofurans and dioxins.

PubMed Central

Rappe, C; Nygren, M; Marklund, S; Keller, L O; Bergqvist, P A; Hansson, M

1985-01-01

Fires, explosions and other accidents in polychlorinated biphenyl (PCB)-filled equipment can result in possible exposure of firemen, cleaning personnel and regular workers. Inhalation, dermal exposure and ingestion are the possible routes of exposure. An indirect assessment of the exposure can be made by analyses of wipes, air and water samples and clothes. A direct assessment of exposure can be made by analyses of blood samples, adipose and other tissue samples, feces and bile. PMID:4029099

Human health exposure assessment for Rocky Mountain Arsenal. Volume 7. Summary exposure assessment version 4. 1. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The objectives of the Human Health Exposure Assessment include: (1) estimate the type and magnitude of exposures to contaminants; (2) Identify contaminants of concern; (3) Identify sites for remedial action; (4) Recommend sites for the no action remedial alternative; and (5) Provide a basis for detailed characterization of the risk associated with all sites. This document consists of the following: An executive summary. Vol I - Land use and exposed population evaluations. Vol. II III - Toxicity assessment (includes army and shell toxicity profiles). Vol. IV - PPLV Methodology. Vol. V - PPLV Calculations. Vol. VI - Study area exposuremore » analysis A introduction, B Western study ares, C Southern study area, D northern Central study area, E Central study area, F Eastern study area, G South plants study area, and H North plants study area. Vol. VII - Summary exposure assessment.« less

The application of quantitative risk assessment to microbial food safety risks.

PubMed

Jaykus, L A

1996-01-01

Regulatory programs and guidelines for the control of foodborne microbial agents have existed in the U.S. for nearly 100 years. However, increased awareness of the scope and magnitude of foodborne disease, as well as the emergence of previously unrecognized human pathogens transmitted via the foodborne route, have prompted regulatory officials to consider new and improved strategies to reduce the health risks associated with pathogenic microorganisms in foods. Implementation of these proposed strategies will involve definitive costs for a finite level of risk reduction. While regulatory decisions regarding the management of foodborne disease risk have traditionally been done with the aid of the scientific community, a formal conceptual framework for the evaluation of health risks from pathogenic microorganisms in foods is warranted. Quantitative risk assessment (QRA), which is formally defined as the technical assessment of the nature and magnitude of a risk caused by a hazard, provides such a framework. Reproducing microorganisms in foods present a particular challenge to QRA because both their introduction and numbers may be affected by numerous factors within the food chain, with all of these factors representing significant stages in food production, handling, and consumption, in a farm-to-table type of approach. The process of QRA entails four designated phases: (1) hazard identification, (2) exposure assessment, (3) dose-response assessment, and (4) risk characterization. Specific analytical tools are available to accomplish the analyses required for each phase of the QRA. The purpose of this paper is to provide a description of the conceptual framework for quantitative microbial risk assessment within the standard description provided by the National Academy of Sciences (NAS) paradigm. Each of the sequential steps in QRA are discussed in detail, providing information on current applications, tools for conducting the analyses, and methodological and/or data

Approaches to advancing quantitative human health risk assessment of environmental chemicals in the post-genomic era.

PubMed

Chiu, Weihsueh A; Euling, Susan Y; Scott, Cheryl Siegel; Subramaniam, Ravi P

2013-09-15

The contribution of genomics and associated technologies to human health risk assessment for environmental chemicals has focused largely on elucidating mechanisms of toxicity, as discussed in other articles in this issue. However, there is interest in moving beyond hazard characterization to making more direct impacts on quantitative risk assessment (QRA)--i.e., the determination of toxicity values for setting exposure standards and cleanup values. We propose that the evolution of QRA of environmental chemicals in the post-genomic era will involve three, somewhat overlapping phases in which different types of approaches begin to mature. The initial focus (in Phase I) has been and continues to be on "augmentation" of weight of evidence--using genomic and related technologies qualitatively to increase the confidence in and scientific basis of the results of QRA. Efforts aimed towards "integration" of these data with traditional animal-based approaches, in particular quantitative predictors, or surrogates, for the in vivo toxicity data to which they have been anchored are just beginning to be explored now (in Phase II). In parallel, there is a recognized need for "expansion" of the use of established biomarkers of susceptibility or risk of human diseases and disorders for QRA, particularly for addressing the issues of cumulative assessment and population risk. Ultimately (in Phase III), substantial further advances could be realized by the development of novel molecular and pathway-based biomarkers and statistical and in silico models that build on anticipated progress in understanding the pathways of human diseases and disorders. Such efforts would facilitate a gradual "reorientation" of QRA towards approaches that more directly link environmental exposures to human outcomes. Published by Elsevier Inc.

EPHECT II: Exposure assessment to household consumer products.

PubMed

Dimitroulopoulou, C; Trantallidi, M; Carrer, P; Efthimiou, G C; Bartzis, J G

2015-12-01

Within the framework of the EPHECT project (Emissions, exposure patterns and health effects of consumer products in the EU), irritative and respiratory health effects were assessed in relation to acute and long-term exposure to key and emerging indoor air pollutants emitted during household use of selected consumer products. In this context, inhalation exposure assessment was carried out for six selected 'target' compounds (acrolein, formaldehyde, benzene, naphthalene, d-limonene and α-pinene). This paper presents the methodology and the outcomes from the micro-environmental modelling of the 'target' pollutants following single or multiple use of selected consumer products and the subsequent exposure assessment. The results indicate that emissions from consumer products of benzene and α-pinene were not considered to contribute significantly to the EU indoor background levels, in contrast to some cases of formaldehyde and d-limonene emissions in Eastern Europe (mainly from cleaning products). The group of housekeepers in East Europe appears to experience the highest exposures to acrolein, formaldehyde and benzene, followed by the group of the retired people in North, who experiences the highest exposures to naphthalene and α-pinene. High exposure may be attributed to the scenarios developed within this project, which follow a 'most-representative worst-case scenario' strategy for exposure and health risk assessment. Despite the above limitations, this is the first comprehensive study that provides exposure estimates for 8 population groups across Europe exposed to 6 priority pollutants, as a result of the use of 15 consumer product classes in households, while accounting for regional differences in uses, use scenarios and ventilation conditions of each region. Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.

Exposure-response analysis and risk assessment for lung cancer in relationship to silica exposure: a 44-year cohort study of 34,018 workers.

PubMed

Liu, Yuewei; Steenland, Kyle; Rong, Yi; Hnizdo, Eva; Huang, Xiji; Zhang, Hai; Shi, Tingming; Sun, Yi; Wu, Tangchun; Chen, Weihong

2013-11-01

Crystalline silica has been classified as a human carcinogen by the International Agency for Research on Cancer (Lyon, France); however, few previous studies have provided quantitative data on silica exposure, silicosis, and/or smoking. We investigated a cohort in China (in 1960-2003) of 34,018 workers without exposure to carcinogenic confounders. Cumulative silica exposure was estimated by linking a job-exposure matrix to work history. Cox proportional hazards model was used to conduct exposure-response analysis and risk assessment. During a mean 34.5-year follow-up, 546 lung cancer deaths were identified. Categorical analyses by quartiles of cumulative silica exposure (using a 25-year lag) yielded hazard ratios of 1.26, 1.54, 1.68, and 1.70, respectively, compared with the unexposed group. Monotonic exposure-response trends were observed among nonsilicotics (P for trend < 0.001). Analyses using splines showed similar trends. The joint effect of silica and smoking was more than additive and close to multiplicative. For workers exposed from ages 20 to 65 years at 0.1 mg/m(3) of silica exposure, the estimated excess lifetime risk (through age 75 years) was 0.51%. These findings confirm silica as a human carcinogen and suggest that current exposure limits in many countries might be insufficient to protect workers from lung cancer. They also indicate that smoking cessation could help reduce lung cancer risk for silica-exposed individuals.

Quantitative Metabolomic Analysis of Urinary Citrulline and Calcitroic Acid in Mice after Exposure to Various Types of Ionizing Radiation.

PubMed

Goudarzi, Maryam; Chauthe, Siddheshwar; Strawn, Steven J; Weber, Waylon M; Brenner, David J; Fornace, Albert J

2016-05-20

With the safety of existing nuclear power plants being brought into question after the Fukushima disaster and the increased level of concern over terrorism-sponsored use of improvised nuclear devices, it is more crucial to develop well-defined radiation injury markers in easily accessible biofluids to help emergency-responders with injury assessment during patient triage. Here, we focused on utilizing ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) to identify and quantitate the unique changes in the urinary excretion of two metabolite markers, calcitroic acid and citrulline, in mice induced by different forms of irradiation; external γ irradiation at a low dose rate (LDR) of 3.0 mGy/min and a high dose rate (HDR) of 1.1 Gy/min, and internal exposure to Cesium-137 ((137)Cs) and Strontium-90 ((90)Sr). The multiple reaction monitoring analysis showed that, while exposure to (137)Cs and (90)Sr induced a statistically significant and persistent decrease, similar doses of external γ beam at the HDR had the opposite effect, and the LDR had no effect on the urinary levels of these two metabolites. This suggests that the source of exposure and the dose rate strongly modulate the in vivo metabolomic injury responses, which may have utility in clinical biodosimetry assays for the assessment of exposure in an affected population. This study complements our previous investigations into the metabolomic profile of urine from mice internally exposed to (90)Sr and (137)Cs and to external γ beam radiation.

Quantitative Metabolomic Analysis of Urinary Citrulline and Calcitroic Acid in Mice after Exposure to Various Types of Ionizing Radiation

PubMed Central

Goudarzi, Maryam; Chauthe, Siddheshwar; Strawn, Steven J.; Weber, Waylon M.; Brenner, David J.; Fornace, Albert J.

2016-01-01

With the safety of existing nuclear power plants being brought into question after the Fukushima disaster and the increased level of concern over terrorism-sponsored use of improvised nuclear devices, it is more crucial to develop well-defined radiation injury markers in easily accessible biofluids to help emergency-responders with injury assessment during patient triage. Here, we focused on utilizing ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) to identify and quantitate the unique changes in the urinary excretion of two metabolite markers, calcitroic acid and citrulline, in mice induced by different forms of irradiation; X-ray irradiation at a low dose rate (LDR) of 3.0 mGy/min and a high dose rate (HDR) of 1.1 Gy/min, and internal exposure to Cesium-137 (137Cs) and Strontium-90 (90Sr). The multiple reaction monitoring analysis showed that, while exposure to 137Cs and 90Sr induced a statistically significant and persistent decrease, similar doses of X-ray beam at the HDR had the opposite effect, and the LDR had no effect on the urinary levels of these two metabolites. This suggests that the source of exposure and the dose rate strongly modulate the in vivo metabolomic injury responses, which may have utility in clinical biodosimetry assays for the assessment of exposure in an affected population. This study complements our previous investigations into the metabolomic profile of urine from mice internally exposed to 90Sr and 137Cs and to X-ray beam radiation. PMID:27213362

INHALATION EXPOSURE-RESPONSE ASSESSMENTS FOR FIVE CHEMICALS

EPA Science Inventory

Inhalation exposure-response assessments for five chemicals (acrolein, ethylene oxide, hexachlorocyclopentadiene, hydrogen sulfide, and phosgene) for less-than-lifetime durations are being developed to inform the development of the Inhalation Exposure-Response Analysis Methodolog...

Risk assessment and management of radiofrequency radiation exposure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dabala, Dana; Surducan, Emanoil; Surducan, Vasile

2013-11-13

Radiofrequency radiation (RFR) industry managers, occupational physicians, security department, and other practitioners must be advised on the basic of biophysics and the health effects of RF electromagnetic fields so as to guide the management of exposure. Information on biophysics of RFR and biological/heath effects is derived from standard texts, literature and clinical experiences. Emergency treatment and ongoing care is outlined, with clinical approach integrating the circumstances of exposure and the patient's symptoms. Experimental risk assessment model in RFR chronic exposure is proposed. Planning for assessment and monitoring exposure, ongoing care, safety measures and work protection are outlining the proper management.

Risk assessment and management of radiofrequency radiation exposure

NASA Astrophysics Data System (ADS)

Dabala, Dana; Surducan, Emanoil; Surducan, Vasile; Neamtu, Camelia

2013-11-01

Radiofrequency radiation (RFR) industry managers, occupational physicians, security department, and other practitioners must be advised on the basic of biophysics and the health effects of RF electromagnetic fields so as to guide the management of exposure. Information on biophysics of RFR and biological/heath effects is derived from standard texts, literature and clinical experiences. Emergency treatment and ongoing care is outlined, with clinical approach integrating the circumstances of exposure and the patient's symptoms. Experimental risk assessment model in RFR chronic exposure is proposed. Planning for assessment and monitoring exposure, ongoing care, safety measures and work protection are outlining the proper management.

Assessing exposure to violence in urban youth.

PubMed

Selner-O'Hagan, M B; Kindlon, D J; Buka, S L; Raudenbush, S W; Earls, F J

1998-02-01

This study reports on the development of a structured interview, My Exposure to Violence (My ETV), that was designed to assess child and youth exposure to violence. Eighty participants between the ages of 9 and 24 were assessed. Data from My ETV were fit to a Rasch model for rating scales, a technique that generates interval level measures and allows the characterization of both chronic and acute exposure. Results indicated that the fit statistics for six scales, covering both lifetime and past year victimization, witnessing of violence, and total exposure, were all good. These scales were found to have high internal consistency (r = .68 to .93) and test-retest reliability (r = .75 to .94). Evidence of construct validity was provided by the item analysis, which revealed a theoretically sensible ordering of item extremity, and also by analysis of bivariate associations. As expected, younger subjects generally reported less exposure to violence than did older subjects, males reported more exposure than did females, African-American subjects reported higher levels of exposure than did White subjects, violent offenders reported more exposure than did non-offenders, and those living in high crime areas reported more exposure than did those residing in low crime areas. Future areas of investigation and the potential contribution to studies of antisocial behavior and post-traumatic stress disorder are discussed.

Quantitative Assessment of Combination Antimicrobial Therapy against Multidrug-Resistant Acinetobacter baumannii▿

PubMed Central

Lim, Tze-Peng; Ledesma, Kimberly R.; Chang, Kai-Tai; Hou, Jing-Guo; Kwa, Andrea L.; Nikolaou, Michael; Quinn, John P.; Prince, Randall A.; Tam, Vincent H.

2008-01-01

Treatment of multidrug-resistant bacterial infections poses a therapeutic challenge to clinicians; combination therapy is often the only viable option for multidrug-resistant infections. A quantitative method was developed to assess the combined killing abilities of antimicrobial agents. Time-kill studies (TKS) were performed using a multidrug-resistant clinical isolate of Acinetobacter baumannii with escalating concentrations of cefepime (0 to 512 mg/liter), amikacin (0 to 256 mg/liter), and levofloxacin (0 to 64 mg/liter). The bacterial burden data in single and combined (two of the three agents with clinically achievable concentrations in serum) TKS at 24 h were mathematically modeled to provide an objective basis for comparing various antimicrobial agent combinations. Synergy and antagonism were defined as interaction indices of <1 and >1, respectively. A hollow-fiber infection model (HFIM) simulating various clinical (fluctuating concentrations over time) dosing exposures was used to selectively validate our quantitative assessment of the combined killing effect. Model fits in all single-agent TKS were satisfactory (r2 > 0.97). An enhanced combined overall killing effect was seen in the cefepime-amikacin combination (interactive index, 0.698; 95% confidence interval [CI], 0.675 to 0.722) and the cefepime-levofloxacin combination (interactive index, 0.929; 95% CI, 0.903 to 0.956), but no significant difference in the combined overall killing effect for the levofloxacin-amikacin combination was observed (interactive index, 0.994; 95% CI, 0.982 to 1.005). These assessments were consistent with observations in HFIM validation studies. Our method could be used to objectively rank the combined killing activities of two antimicrobial agents when used together against a multidrug-resistant A. baumannii isolate. It may offer better insights into the effectiveness of various antimicrobial combinations and warrants further investigations. PMID:18505848

Assessing Inhalation Exposures Associated with ...

EPA Pesticide Factsheets

Journal Article This paper presents a simulation-based approach for assessing short-term, water-distribution-system-wide inhalation exposures that could result from showering and the use of humidifiers during contamination events.

Exposure Assessment of Livestock Carcass Management ...

EPA Pesticide Factsheets

Technical Brief This research brief summarizes an evaluation of livestock carcass management options following a natural disaster through a comparative exposure assessment. This assessment helps to inform a scientifically-based selection of environmentally protective methods in times of emergency.

Qualitative and Semiquantitative Assessment of Exposure to Engineered Nanomaterials within the French EpiNano Program: Inter- and Intramethod Reliability Study.

PubMed

Guseva Canu, Irina; Jezewski-Serra, Delphine; Delabre, Laurène; Ducamp, Stéphane; Iwatsubo, Yuriko; Audignon-Durand, Sabine; Ducros, Cécile; Radauceanu, Anca; Durand, Catherine; Witschger, Olivier; Flahaut, Emmanuel

2017-01-01

The relatively recent development of industries working with nanomaterials has created challenges for exposure assessment. In this article, we propose a relatively simple approach to assessing nanomaterial exposures for the purposes of epidemiological studies of workers in these industries. This method consists of an onsite industrial hygiene visit of facilities carried out individually and a description of workstations where nano-objects and their agglomerates and aggregates (NOAA) are present using a standardized tool, the Onsite technical logbook. To assess its reliability, we implemented this approach for assessing exposure to NOAA in workplaces at seven workstations which synthesize and functionalize carbon nanotubes. The prediction of exposure to NOAA using this method exhibited substantial agreement with that of the reference method, the latter being based on an onsite group visit, an expert's report and exposure measurements (Cohen kappa = 0.70, sensitivity = 0.88, specificity = 0.92). Intramethod comparison of results for exposure prediction showed moderate agreement between the three evaluators (two program team evaluators and one external evaluator) (weighted Fleiss kappa = 0.60, P = 0.003). Interevaluator reliability of the semiquantitative exposure characterization results was excellent between the two evaluators from the program team (Spearman rho = 0.93, P = 0.03) and fair when these two evaluators' results were compared with the external evaluator's results. The project was undertaken within the framework of the French epidemiological surveillance program EpiNano. This study allowed a first reliability assessment of the EpiNano method. However, to further validate this method a comparison with robust quantitative exposure measurement data is necessary. © The Author 2017. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Assessment of mechanisms of metal-induced reproductive toxicity in aquatic species as a biomarker of exposure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, M.; George, W.; Preslan, J.

1996-05-02

This project discusses the following studies: identification and quantitation of heavy metals and petroleum products present in Bayou Trepagnier relative to control sites; assessment of the uptake and bioaccumulation of metals and organic contaminants of interest in aquatic species; establishment and use of polarographic methods for use in metal speciation studies to identify specific chemical forms present in sediments, waters and organism; and evaluation of contaminants on reproductive function of aquatic species as potential biomarkers of exposure. 14 refs.

Aggregate Exposure Pathways in Support of Risk Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tan, Yu-Mei; Leonard, Jeremy A.; Edwards, Stephen

Over time, risk assessment has shifted from establishing relationships between exposure to a single chemical and a resulting adverse health outcome, to evaluation of multiple chemicals and disease outcomes simultaneously. As a result, there is an increasing need to better understand the complex mechanisms that influence risk of chemical and non-chemical stressors, beginning at their source and ending at a biological endpoint relevant to human or ecosystem health risk assessment. Just as the Adverse Outcome Pathway (AOP) framework has emerged as a means of providing insight into mechanism-based toxicity, the exposure science community has seen the recent introduction of themore » Aggregate Exposure Pathway (AEP) framework. AEPs aid in making exposure data applicable to the FAIR (i.e., findable, accessible, interoperable, and reusable) principle, especially by (1) organizing continuous flow of disjointed exposure information;(2) identifying data gaps, to focus resources on acquiring the most relevant data; (3) optimizing use and repurposing of existing exposure data; and (4) facilitating interoperability among predictive models. Herein, we discuss integration of the AOP and AEP frameworks and how such integration can improve confidence in both traditional and cumulative risk assessment approaches.« less

Aggregate Exposure Pathways in Support of Risk Assessment

DOE PAGES

Tan, Yu-Mei; Leonard, Jeremy A.; Edwards, Stephen; ...

2018-03-29

Over time, risk assessment has shifted from establishing relationships between exposure to a single chemical and a resulting adverse health outcome, to evaluation of multiple chemicals and disease outcomes simultaneously. As a result, there is an increasing need to better understand the complex mechanisms that influence risk of chemical and non-chemical stressors, beginning at their source and ending at a biological endpoint relevant to human or ecosystem health risk assessment. Just as the Adverse Outcome Pathway (AOP) framework has emerged as a means of providing insight into mechanism-based toxicity, the exposure science community has seen the recent introduction of themore » Aggregate Exposure Pathway (AEP) framework. AEPs aid in making exposure data applicable to the FAIR (i.e., findable, accessible, interoperable, and reusable) principle, especially by (1) organizing continuous flow of disjointed exposure information;(2) identifying data gaps, to focus resources on acquiring the most relevant data; (3) optimizing use and repurposing of existing exposure data; and (4) facilitating interoperability among predictive models. Herein, we discuss integration of the AOP and AEP frameworks and how such integration can improve confidence in both traditional and cumulative risk assessment approaches.« less

Quantitative Exposure Assessment of Various Chemical Substances in a Wafer Fabrication Industry Facility

PubMed Central

Jang, Jae-Kil; Shin, Jung-Ah

2011-01-01

Objectives This study was designed to evaluate exposure levels of various chemicals used in wafer fabrication product lines in the semiconductor industry where work-related leukemia has occurred. Methods The research focused on 9 representative wafer fabrication bays among a total of 25 bays in a semiconductor product line. We monitored the chemical substances categorized as human carcinogens with respect to leukemia as well as harmful chemicals used in the bays and substances with hematologic and reproductive toxicities to evaluate the overall health effect for semiconductor industry workers. With respect to monitoring, active and passive sampling techniques were introduced. Eight-hour long-term and 15-minute short-term sampling was conducted for the area as well as on personal samples. Results The results of the measurements for each substance showed that benzene, toluene, xylene, n-butyl acetate, 2-methoxyethanol, 2-heptanone, ethylene glycol, sulfuric acid, and phosphoric acid were non-detectable (ND) in all samples. Arsine was either "ND" or it existed only in trace form in the bay air. The maximum exposure concentration of fluorides was approximately 0.17% of the Korea occupational exposure limits, with hydrofluoric acid at about 0.2%, hydrochloric acid 0.06%, nitric acid 0.05%, isopropyl alcohol 0.4%, and phosphine at about 2%. The maximum exposure concentration of propylene glycol monomethyl ether acetate (PGMEA) was 0.0870 ppm, representing only 0.1% or less than the American Industrial Hygiene Association recommended standard (100 ppm). Conclusion Benzene, a known human carcinogen for leukemia, and arsine, a hematologic toxin, were not detected in wafer fabrication sites in this study. Among reproductive toxic substances, n-butyl acetate was not detected, but fluorides and PGMEA existed in small amounts in the air. This investigation was focused on the air-borne chemical concentrations only in regular working conditions. Unconditional exposures during

IWGT report on quantitative approaches to genotoxicity risk assessment II. Use of point-of-departure (PoD) metrics in defining acceptable exposure limits and assessing human risk

EPA Science Inventory

This is the second of two reports from the International Workshops on Genotoxicity Testing (IWGT) Working Group on Quantitative Approaches to Genetic Toxicology Risk Assessment (the QWG). The first report summarized the discussions and recommendations of the QWG related to the ne...

Rock Slide Risk Assessment: A Semi-Quantitative Approach

NASA Astrophysics Data System (ADS)

Duzgun, H. S. B.

2009-04-01

Rock slides can be better managed by systematic risk assessments. Any risk assessment methodology for rock slides involves identification of rock slide risk components, which are hazard, elements at risk and vulnerability. For a quantitative/semi-quantitative risk assessment for rock slides, a mathematical value the risk has to be computed and evaluated. The quantitative evaluation of risk for rock slides enables comparison of the computed risk with the risk of other natural and/or human-made hazards and providing better decision support and easier communication for the decision makers. A quantitative/semi-quantitative risk assessment procedure involves: Danger Identification, Hazard Assessment, Elements at Risk Identification, Vulnerability Assessment, Risk computation, Risk Evaluation. On the other hand, the steps of this procedure require adaptation of existing or development of new implementation methods depending on the type of landslide, data availability, investigation scale and nature of consequences. In study, a generic semi-quantitative risk assessment (SQRA) procedure for rock slides is proposed. The procedure has five consecutive stages: Data collection and analyses, hazard assessment, analyses of elements at risk and vulnerability and risk assessment. The implementation of the procedure for a single rock slide case is illustrated for a rock slope in Norway. Rock slides from mountain Ramnefjell to lake Loen are considered to be one of the major geohazards in Norway. Lake Loen is located in the inner part of Nordfjord in Western Norway. Ramnefjell Mountain is heavily jointed leading to formation of vertical rock slices with height between 400-450 m and width between 7-10 m. These slices threaten the settlements around Loen Valley and tourists visiting the fjord during summer season, as the released slides have potential of creating tsunami. In the past, several rock slides had been recorded from the Mountain Ramnefjell between 1905 and 1950. Among them

Exposure Assessment Tools by Tiers and Types - Aggregate and Cumulative

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Use of computer models to assess exposure to agricultural chemicals via drinking water.

PubMed

Gustafson, D I

1995-10-27

Surveys of drinking water quality throughout the agricultural regions of the world have revealed the tendency of certain crop protection chemicals to enter water supplies. Fortunately, the trace concentrations that have been detected are generally well below the levels thought to have any negative impact on human health or the environment. However, the public expects drinking water to be pristine and seems willing to bear the costs involved in further regulating agricultural chemical use in such a way so as to eliminate the potential for such materials to occur at any detectable level. Of all the tools available to assess exposure to agricultural chemicals via drinking water, computer models are one of the most cost-effective. Although not sufficiently predictive to be used in the absence of any field data, such computer programs can be used with some degree of certainty to perform quantitative extrapolations and thereby quantify regional exposure from field-scale monitoring information. Specific models and modeling techniques will be discussed for performing such exposure analyses. Improvements in computer technology have recently made it practical to use Monte Carlo and other probabilistic techniques as a routine tool for estimating human exposure. Such methods make it possible, at least in principle, to prepare exposure estimates with known confidence intervals and sufficient statistical validity to be used in the regulatory management of agricultural chemicals.

NATIONAL HUMAN EXPOSURE ASSESSMENT SURVEY (NHEXAS): OPPORTUNITIES AND LESSONS LEARNED

EPA Science Inventory

The National Human Exposure Assessment Survey (NHEXAS) in its fullest sense is a conceptual design, which upon implementation, will have long-term implications to exposure research and assessment. The ultimate goal is to document national distribution of human exposure to pote...

Variability in quartz exposure in the construction industry: implications for assessing exposure-response relations.

PubMed

Tjoe Nij, Evelyn; Höhr, Doris; Borm, Paul; Burstyn, Igor; Spierings, Judith; Steffens, Friso; Lumens, Mieke; Spee, Ton; Heederik, Dick

2004-03-01

The aims of this study were to determine implications of inter- and intraindividual variation in exposure to respirable (quartz) dust and of heterogeneity in dust characteristics for epidemiologic research in construction workers. Full-shift personal measurements (n = 67) from 34 construction workers were collected. The between-worker and day-to-day variances of quartz and respirable dust exposure were estimated using mixed models. Heterogeneity in dust characteristics was evaluated by electron microscopic analysis and electron spin resonance. A grouping strategy based on job title resulted in a 2- and 3.5-fold reduction in expected attenuation of a hypothetical exposure-response relation for respirable dust and quartz exposure, respectively, compared to an individual based approach. Material worked on explained most of the between-worker variance in respirable dust and quartz exposure. However, for risk assessment in epidemiology, grouping workers based on the materials they work on is not practical. Microscopic characterization of dust samples showed large quantities of aluminum silicates and large quantities of smaller particles, resulting in a D(50) between 1 and 2 microm. For risk analysis, job title can be used to create exposure groups, although error is introduced by the heterogeneity of dust produced by different construction workers activities and by the nonuniformity of exposure groups. A grouping scheme based on materials worked on would be superior, for both exposure and risk assessment, but is not practical when assessing past exposure. In dust from construction sites, factors are present that are capable of influencing the toxicological potency.

Some suggested future directions of quantitative resource assessments

USGS Publications Warehouse

Singer, D.A.

2001-01-01

Future quantitative assessments will be expected to estimate quantities, values, and locations of undiscovered mineral resources in a form that conveys both economic viability and uncertainty associated with the resources. Historically, declining metal prices point to the need for larger deposits over time. Sensitivity analysis demonstrates that the greatest opportunity for reducing uncertainty in assessments lies in lowering uncertainty associated with tonnage estimates. Of all errors possible in assessments, those affecting tonnage estimates are by far the most important. Selecting the correct deposit model is the most important way of controlling errors because the dominance of tonnage-deposit models are the best known predictor of tonnage. Much of the surface is covered with apparently barren rocks and sediments in many large regions. Because many exposed mineral deposits are believed to have been found, a prime concern is the presence of possible mineralized rock under cover. Assessments of areas with resources under cover must rely on extrapolation from surrounding areas, new geologic maps of rocks under cover, or analogy with other well-explored areas that can be considered training tracts. Cover has a profound effect on uncertainty and on methods and procedures of assessments because geology is seldom known and geophysical methods typically have attenuated responses. Many earlier assessment methods were based on relationships of geochemical and geophysical variables to deposits learned from deposits exposed on the surface-these will need to be relearned based on covered deposits. Mineral-deposit models are important in quantitative resource assessments for two reasons: (1) grades and tonnages of most deposit types are significantly different, and (2) deposit types are present in different geologic settings that can be identified from geologic maps. Mineral-deposit models are the keystone in combining the diverse geoscience information on geology, mineral

Physical Activity, a Critical Exposure Factor of Environmental Pollution in Children and Adolescents Health Risk Assessment.

PubMed

Dong, Jingmei; Zhang, Su; Xia, Li; Yu, Yi; Hu, Shuangshuang; Sun, Jingyu; Zhou, Ping; Chen, Peijie

2018-01-23

It is an extremely urgent problem that physical fitness promotion must face not only the increasing air pollution but also the decline of physical activity level of children and adolescents worldwide at present, which is the major reason that forms an inactive lifestyle and does harm to adolescents' health. Thus, it is necessary to focus on the exposure factor in environmental health risk assessment (EHRA) which conducts supervision of environmental pollution and survey of adolescents' activity patterns according to the harmful characteristics of air pollutant and relationship between dose and response. Some countries, such as USA, Canada and Australia, regard both respiratory rate and physical activity pattern as main exposure factors for adolescents in both air pollution health risk assessment and exercise risk assessment to forecast a safe exposing condition of pollutant for adolescents while they are doing exercise outdoors. In addition, it suggests that the testing indexes and testing methods of these two exposure factors, such as investigating the time of daily physical activity, strength, and characteristic of frequency, help to set up the quantitative relationship between environmental pollution index and the time, strength, frequency of daily activities, and formulate children's and adolescents' activity instructions under different levels of environmental pollutions. As smog becomes increasingly serious at present, it is meaningful to take physical activity as a critical composition of exposure factor and establish physical activity guideline, so as to reduce the risk of air pollution, and promote physical health of children and adolescents effectively.

Toward Quantitative Small Animal Pinhole SPECT: Assessment of Quantitation Accuracy Prior to Image Compensations

PubMed Central

Chen, Chia-Lin; Wang, Yuchuan; Lee, Jason J. S.; Tsui, Benjamin M. W.

2011-01-01

Purpose We assessed the quantitation accuracy of small animal pinhole single photon emission computed tomography (SPECT) under the current preclinical settings, where image compensations are not routinely applied. Procedures The effects of several common image-degrading factors and imaging parameters on quantitation accuracy were evaluated using Monte-Carlo simulation methods. Typical preclinical imaging configurations were modeled, and quantitative analyses were performed based on image reconstructions without compensating for attenuation, scatter, and limited system resolution. Results Using mouse-sized phantom studies as examples, attenuation effects alone degraded quantitation accuracy by up to −18% (Tc-99m or In-111) or −41% (I-125). The inclusion of scatter effects changed the above numbers to −12% (Tc-99m or In-111) and −21% (I-125), respectively, indicating the significance of scatter in quantitative I-125 imaging. Region-of-interest (ROI) definitions have greater impacts on regional quantitation accuracy for small sphere sources as compared to attenuation and scatter effects. For the same ROI, SPECT acquisitions using pinhole apertures of different sizes could significantly affect the outcome, whereas the use of different radii-of-rotation yielded negligible differences in quantitation accuracy for the imaging configurations simulated. Conclusions We have systematically quantified the influence of several factors affecting the quantitation accuracy of small animal pinhole SPECT. In order to consistently achieve accurate quantitation within 5% of the truth, comprehensive image compensation methods are needed. PMID:19048346

[Occupational exposure to nanoparticles. Assessment of workplace exposure].

PubMed

Bujak-Pietrek, Stella

2010-01-01

Nanotechnology is currently one of the most popular branch of science. It is a technology that enables designing, manufacturing and application of materials and structures of very small dimensions, and its products are applied in almost every field of life. Nanoparticles are the structures having one or more dimensions of the order of 100 nm or less. They are used in precise mechanics, electronics, optics, medicine, pharmacy, cosmetics and many other spheres. Due to their very small size, nanostructures have completely different and specific properties, unknown for the bulk of materials. Fast-growing nanotechnology provides a wide spectrum of applications, but it also brings about new and unknown danger to human health. Nanotechnology is the branch that has developed rather recently, and much information about health risk and its influence on the environment is beyond our knowledge. Nanoparticles, released in many technological processes, as well as manufactured nanoparticles can induce occupational hazards to workers. The lack of regulations and standards, compulsory in the manufacture and use ofnanoparticles is a fundamental problem faced in the evaluation of exposure. Another problem is the choice of proper measurement equipment for surveying of very small particles - their number, mass and surface area in the workpost air. In this article, the possibility and scope of exposure assessment is discussed and a brief specification of available instrumentation for counting and assessing the parameters essential for classifying the exposure to nanoparticles is presented.

Human exposure and internal dose assessments of acrylamide in food.

PubMed

Dybing, E; Farmer, P B; Andersen, M; Fennell, T R; Lalljie, S P D; Müller, D J G; Olin, S; Petersen, B J; Schlatter, J; Scholz, G; Scimeca, J A; Slimani, N; Törnqvist, M; Tuijtelaars, S; Verger, P

2005-03-01

This review provides a framework contributing to the risk assessment of acrylamide in food. It is based on the outcome of the ILSI Europe FOSIE process, a risk assessment framework for chemicals in foods and adds to the overall framework by focusing especially on exposure assessment and internal dose assessment of acrylamide in food. Since the finding that acrylamide is formed in food during heat processing and preparation of food, much effort has been (and still is being) put into understanding its mechanism of formation, on developing analytical methods and determination of levels in food, and on evaluation of its toxicity and potential toxicity and potential human health consequences. Although several exposure estimations have been proposed, a systematic review of key information relevant to exposure assessment is currently lacking. The European and North American branches of the International Life Sciences Institute, ILSI, discussed critical aspects of exposure assessment, parameters influencing the outcome of exposure assessment and summarised data relevant to the acrylamide exposure assessment to aid the risk characterisation process. This paper reviews the data on acrylamide levels in food including its formation and analytical methods, the determination of human consumption patterns, dietary intake of the general population, estimation of maximum intake levels and identification of groups of potentially high intakes. Possible options and consequences of mitigation efforts to reduce exposure are discussed. Furthermore the association of intake levels with biomarkers of exposure and internal dose, considering aspects of bioavailability, is reviewed, and a physiologically-based toxicokinetic (PBTK) model is described that provides a good description of the kinetics of acrylamide in the rat. Each of the sections concludes with a summary of remaining gaps and uncertainties.

DEVELOPMENT OF CHEMICAL METHODS TO CHARACTERIZE EXPOSURE TO EDCS IN THE NEUSE RIVER BASIN

EPA Science Inventory

To develop a quantitative health and environmental risk assessment of endocrine disrupting compounds (EDCs), information on exposures is essential. A full exposure assessment has complex requirements that require preliminary information to direct further research in this area....

Exposure monitoring and risk assessment of biphenyl in the workplace.

PubMed

Kim, Hyeon-Yeong; Shin, Sae-Mi; Ham, Miran; Lim, Cheol-Hong; Byeon, Sang-Hoon

2015-05-13

This study was performed to assess exposure to and the risk caused by biphenyl in the workplace. Biphenyl is widely used as a heat transfer medium and as an emulsifier and polish in industry. Vapor or high levels of dust inhalation and dermal exposure to biphenyl can cause eye inflammation, irritation of respiratory organs, and permanent lesions in the liver and nervous system. In this study, the workplace environment concentrations were assessed as central tendency exposure and reasonable maximum exposure and were shown to be 0.03 and 0.12 mg/m³, respectively. In addition, the carcinogenic risk of biphenyl as determined by risk assessment was 0.14 × 10⁻⁴ (central tendency exposure) and 0.56 × 10⁻⁴ (reasonable maximum exposure), which is below the acceptable risk value of 1.0 × 10⁻⁴. Furthermore, the central tendency exposure and reasonable maximum exposure hazard quotients were 0.01 and 0.06 for oral toxicity, 0.05 and 0.23 for inhalation toxicity, and 0.08 and 0.39 for reproduction toxicity, respectively, which are all lower than the acceptable hazard quotient of 1.0. Therefore, exposure to biphenyl was found to be safe in current workplace environments. Because occupational exposure limits are based on socioeconomic assessment, they are generally higher than true values seen in toxicity experiments. Based on the results of exposure monitoring of biphenyl, the current occupational exposure limits in Korea could be reviewed.

Exposure assessment of process-related contaminants in food by biomarker monitoring

DOE PAGES

Rietjens, Ivonne M. C. M.; Dussort, P.; Gunther, Helmut; ...

2018-01-04

Exposure assessment is a fundamental part of the risk assessment paradigm, but can often present a number of challenges and uncertainties. This is especially the case for process contaminants formed during the processing, e.g. heating of food, since they are in part highly reactive and/or volatile, thus making exposure assessment by analysing contents in food unreliable. New approaches are therefore required to accurately assess consumer exposure and thus better inform the risk assessment. Such novel approaches may include the use of biomarkers, physiologically based kinetic (PBK) modelling-facilitated reverse dosimetry, and/or duplicate diet studies. This review focuses on the state ofmore » the art with respect to the use of biomarkers of exposure for the process contaminants acrylamide, 3-MCPD esters, glycidyl esters, furan and acrolein. From the overview presented, it becomes clear that the field of assessing human exposure to process-related contaminants in food by biomarker monitoring is promising and strongly developing. The current state of the art as well as the existing data gaps and challenges for the future were defined. They include (1) using PBK modelling and duplicate diet studies to establish, preferably in humans, correlations between external exposure and biomarkers; (2) elucidation of the possible endogenous formation of the process-related contaminants and the resulting biomarker levels; (3) the influence of inter-individual variations and how to include that in the biomarker-based exposure predictions; (4) the correction for confounding factors; (5) the value of the different biomarkers in relation to exposure scenario’s and risk assessment, and (6) the possibilities of novel methodologies. Here, in spite of these challenges it can be concluded that biomarker-based exposure assessment provides a unique opportunity to more accurately assess consumer exposure to process-related contaminants in food and thus to better inform risk assessment.« less

Exposure assessment of process-related contaminants in food by biomarker monitoring

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rietjens, Ivonne M. C. M.; Dussort, P.; Gunther, Helmut

Exposure assessment is a fundamental part of the risk assessment paradigm, but can often present a number of challenges and uncertainties. This is especially the case for process contaminants formed during the processing, e.g. heating of food, since they are in part highly reactive and/or volatile, thus making exposure assessment by analysing contents in food unreliable. New approaches are therefore required to accurately assess consumer exposure and thus better inform the risk assessment. Such novel approaches may include the use of biomarkers, physiologically based kinetic (PBK) modelling-facilitated reverse dosimetry, and/or duplicate diet studies. This review focuses on the state ofmore » the art with respect to the use of biomarkers of exposure for the process contaminants acrylamide, 3-MCPD esters, glycidyl esters, furan and acrolein. From the overview presented, it becomes clear that the field of assessing human exposure to process-related contaminants in food by biomarker monitoring is promising and strongly developing. The current state of the art as well as the existing data gaps and challenges for the future were defined. They include (1) using PBK modelling and duplicate diet studies to establish, preferably in humans, correlations between external exposure and biomarkers; (2) elucidation of the possible endogenous formation of the process-related contaminants and the resulting biomarker levels; (3) the influence of inter-individual variations and how to include that in the biomarker-based exposure predictions; (4) the correction for confounding factors; (5) the value of the different biomarkers in relation to exposure scenario’s and risk assessment, and (6) the possibilities of novel methodologies. Here, in spite of these challenges it can be concluded that biomarker-based exposure assessment provides a unique opportunity to more accurately assess consumer exposure to process-related contaminants in food and thus to better inform risk assessment.« less

Exposure assessment of process-related contaminants in food by biomarker monitoring.

PubMed

Rietjens, Ivonne M C M; Dussort, P; Günther, Helmut; Hanlon, Paul; Honda, Hiroshi; Mally, Angela; O'Hagan, Sue; Scholz, Gabriele; Seidel, Albrecht; Swenberg, James; Teeguarden, Justin; Eisenbrand, Gerhard

2018-01-01

Exposure assessment is a fundamental part of the risk assessment paradigm, but can often present a number of challenges and uncertainties. This is especially the case for process contaminants formed during the processing, e.g. heating of food, since they are in part highly reactive and/or volatile, thus making exposure assessment by analysing contents in food unreliable. New approaches are therefore required to accurately assess consumer exposure and thus better inform the risk assessment. Such novel approaches may include the use of biomarkers, physiologically based kinetic (PBK) modelling-facilitated reverse dosimetry, and/or duplicate diet studies. This review focuses on the state of the art with respect to the use of biomarkers of exposure for the process contaminants acrylamide, 3-MCPD esters, glycidyl esters, furan and acrolein. From the overview presented, it becomes clear that the field of assessing human exposure to process-related contaminants in food by biomarker monitoring is promising and strongly developing. The current state of the art as well as the existing data gaps and challenges for the future were defined. They include (1) using PBK modelling and duplicate diet studies to establish, preferably in humans, correlations between external exposure and biomarkers; (2) elucidation of the possible endogenous formation of the process-related contaminants and the resulting biomarker levels; (3) the influence of inter-individual variations and how to include that in the biomarker-based exposure predictions; (4) the correction for confounding factors; (5) the value of the different biomarkers in relation to exposure scenario's and risk assessment, and (6) the possibilities of novel methodologies. In spite of these challenges it can be concluded that biomarker-based exposure assessment provides a unique opportunity to more accurately assess consumer exposure to process-related contaminants in food and thus to better inform risk assessment.

INDOOR AEROSOLS AND EXPOSURE ASSESSMENT

EPA Science Inventory

This chapter provides an overview of both indoor aerosol concentration measurements, and the considerations for assessment of exposure to aerosols in non-occupational settings. The fixed-location measurements of concentration at an outdoor location, while commuting inside an a...

An Exposure Assessment of Polybrominated Diphenyl Ethers (Pbde) (Final)

EPA Science Inventory

EPA announced the availability of the final report, An Exposure Assessment of Polybrominated Diphenyl Ethers. This report provides a comprehensive assessment of the exposure of Americans to this class of persistent organic pollutants. Individual chapters in this document ...

Risk assessments for exposure of deployed military personnel to insecticides and personal protective measures used for disease-vector management.

PubMed

Macedo, Paula A; Peterson, Robert K D; Davis, Ryan S

2007-10-01

Infectious diseases are problematic for deployed military forces throughout the world, and, historically, more military service days have been lost to insect-vectored diseases than to combat. Because of the limitations in efficacy and availability of both vaccines and therapeutic drugs, vector management often is the best tool that military personnel have against most vector-borne pathogens. However, the use of insecticides may raise concerns about the safety of their effects on the health of the military personnel exposed to them. Therefore, our objective was to use risk assessment methodologies to evaluate health risks to deployed U.S. military personnel from vector management tactics. Our conservative tier-1, quantitative risk assessment focused on acute, subchronic, and chronic exposures and cancer risks to military personnel after insecticide application and use of personal protective measures in different scenarios. Exposures were estimated for every scenario, chemical, and pathway. Acute, subchronic, and chronic risks were assessed using a margin of exposure (MOE) approach. Our MOE was the ratio of a no-observed-adverse-effect level (NOAEL) to an estimated exposure. MOEs were greater than the levels of concern (LOCs) for all surface residual and indoor space spraying exposures, except acute dermal exposure to lambda-cyhalothrin. MOEs were greater than the LOCs for all chemicals in the truck-mounted ultra-low-volume (ULV) exposure scenario. The aggregate cancer risk for permethrin exceeded 1 x 10(-6), but more realistic exposure refinements would reduce the cancer risk below that value. Overall, results indicate that health risks from exposures to insecticides and personal protective measures used by military personnel are low.

Quantitative assessment of cypermethrin induced behavioural and biochemical anomalies in adult zebrafish.

PubMed

Nema, Shubham; Bhargava, Yogesh

2018-05-23

Cypermethrin is one of the top five pesticides used globally. Although the effect of cypermethrin on the embryonic stages of zebrafish is well characterized, its toxic effect on the behaviour of adult zebrafish is largely unknown. Here we used videogram and automated tracking approach to quantitatively assess behavioural toxicity induced by the short exposure of cypermethrin to adult zebrafish. We observed that cypermethrin at 25 ppb level induced behavioural toxicity in adult zebrafish. Motor activity of the treated group was significantly retarded which affected their overall exploratory behaviour including their visit to the central arena of the open-field test. Furthermore, the treated group showed erratic movements (covered less distance per unit time) without affecting their angle based behavioural endpoints. In contrast to the control group, the cypermethrin exposed group showed frequent freezing behaviour. However, their freezing episodes were characterized by constant drift-like movement caused by the loss of their voluntary control over the motor coordination. These behavioural changes are similar to typical anxiety-like behaviour. Though, cypermethrin exposure at ppb level for just half an hour was sufficient to induce behavioural toxicity, it failed to alter brain superoxide dismutase and acetylcholine esterase enzyme activity. Our data indicates that acute short-term exposure of cypermethrin induces behavioural anomalies in adult zebrafish through a mechanism distinct from alteration of brain superoxide dismutase and the acetylcholine esterase activity. Copyright © 2018 Elsevier Inc. All rights reserved.

The challenges of exposure assessment in health studies of Gulf War veterans

PubMed Central

Glass, Deborah C; Sim, Malcolm R

2006-01-01

A variety of exposures have been investigated in Gulf War veterans' health studies. These have most commonly been by self-report in a postal questionnaire but modelling and bio-monitoring have also been employed. Exposure assessment is difficult to do well in studies of any workplace environment. It is made more difficult in Gulf War studies where there are a number and variety of possible exposures, no agreed metrics for individual exposures and few contemporary records associating the exposure with an individual. In some studies, the exposure assessment was carried out some years after the war and in the context of media interest. Several studies have examined different ways to test the accuracy of exposure reporting in Gulf War cohorts. There is some evidence from Gulf War studies that self-reported exposures were subject to recall bias but it is difficult to assess the extent. Occupational exposure-assessment methodology can provide insights into the exposure-assessment process and how to do it well. This is discussed in the context of the Gulf War studies. Alternative exposure-assessment methodologies are presented, although these may not be suitable for widespread use in veteran studies. Due to the poor quality of and accessibility of objective military exposure records, self-assessed exposure questionnaires are likely to remain the main instrument for assessing the exposure for a large number of veterans. If this is to be the case, then validation methods with more objective methods need to be included in future study designs. PMID:16687267

Exposure assessment for endocrine disruptors: some considerations in the design of studies.

PubMed Central

Rice, Carol; Birnbaum, Linda S; Cogliano, James; Mahaffey, Kathryn; Needham, Larry; Rogan, Walter J; vom Saal, Frederick S

2003-01-01

In studies designed to evaluate exposure-response relationships in children's development from conception through puberty, multiple factors that affect the generation of meaningful exposure metrics must be considered. These factors include multiple routes of exposure; the timing, frequency, and duration of exposure; need for qualitative and quantitative data; sample collection and storage protocols; and the selection and documentation of analytic methods. The methods for exposure data collection and analysis must be sufficiently robust to accommodate the a priori hypotheses to be tested, as well as hypotheses generated from the data. A number of issues that must be considered in study design are summarized here. PMID:14527851

High Throughput Exposure Assessment for Thousands of Chemicals (Fit-For-Purpose Exposure Assessment workshop - Italy)

EPA Science Inventory

Models incorporate knowledge, assumptions and data. The trick is to know which model to use and when. Rough exposure assessments may be potentially useful if the uncertainty can be quantified and is acceptable (i.e., “fit for purpose”).

Quantitation of exposure to benzo[a]pyrene with monoclonal antibodies.

PubMed Central

Santella, R M; Hsieh, L L; Lin, C D; Viet, S; Weinstein, I B

1985-01-01

It is now possible to quantitate carcinogen adducts on DNA by highly sensitive immunoassays. These techniques are particularly useful for screening human populations for exposure to potential environmental carcinogens. We have developed a panel of monoclonal antibodies that react with benzo(a)pyrene (BP) modified DNA to be used in an enzyme linked immunoassay (ELISA) to quantitate adduct levels of both human and animal samples. BALBc/Cr mice were immunized with either DNA modified by 7 beta, 8 alpha-dihydroxy-9 alpha, 10 alpha-epoxy-7,8,9, 10-tetrahydrobenzo(a)pyrene (BPDE-I-DNA) complexed electrostatically to methylated bovine serum albumin or with BPDE-I-modified guanosine conjugated with bovine serum albumin (BPDE-I-G-BSA). Four stable clones were produced from the spleen cells of animals immunized with BPDE-I-DNA and one from BPDE-I-G-BSA immunized animals. All antibodies were shown to be highly specific for BPDE-I-DNA and did not crossreact with nonmodified DNA or with N-2-acetylaminofluorene or 1-aminopyrene modified DNA. The antibodies differed in their sensitivity to BPDE-II-DNA, BPDE-I-poly G, BPDE-I-tetraols and BPDE-I-dG. In general, all the antibodies showed the greatest affinity for their original antigen. Those generated against modified DNA showed highest reactivity against modified DNA while the one antibody generated against the monoadduct showed highest reactivity with the monoadduct. These antibodies are currently being used in a highly sensitive competitive ELISA to quantitate levels of BP-DNA adducts in various animal and human tissue samples. PMID:4085452

OSHA's approach to risk assessment for setting a revised occupational exposure standard for 1,3-butadiene.

PubMed Central

Grossman, E A; Martonik, J

1990-01-01

In its 1980 benzene decision [Industrial Union Department, ALF-CIO v. American Petroleum Institute, 448 U.S. 607 (1980)], the Supreme Court ruled that "before he can promulgate any permanent health or safety standard, the Secretary [of Labor] is required to make a threshold finding that a place of employment is unsafe--in the sense that significant risks are present and can be lessened by a change in practices" (448 U.S. at 642). The Occupational Safety and Health Administration (OSHA) has interpreted this to mean that whenever possible, it must quantify the risk associated with occupational exposure to a toxic substance at the current permissible exposure limit (PEL). If OSHA determines that there is significant risk to workers' health at its current standard, then it must quantify the risk associated with a variety of alternative standards to determine at what level, if any, occupational exposure to a substance no longer poses a significant risk. For rulemaking on occupational exposure to 1,3-butadiene, there are two studies that are suitable for quantitative risk assessment. One is a mouse inhalation bioassay conducted by the National Toxicology Program (NTP), and the other is a rat inhalation bioassay conducted by Hazelton Laboratories Europe. Of the four risk assessments that have been submitted to OSHA, all four have used the mouse and/or rat data with a variety of models to quantify the risk associated with occupational exposure to 1,3-butadiene. In addition, OSHA has performed its own risk assessment using the female mouse and female rat data and the one-hit and multistage models.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:2401254

Nurse exposure to physical and nonphysical violence, bullying, and sexual harassment: a quantitative review.

PubMed

Spector, Paul E; Zhou, Zhiqing E; Che, Xin Xuan

2014-01-01

This paper provides a quantitative review that estimates exposure rates by type of violence, setting, source, and world region. A quantitative review of the nursing violence literature was summarized. A literature search was conducted using the CINAHL, Medline and PsycInfo data bases. Studies included had to report empirical results using a nursing sample, and include data on bullying, sexual harassment, and/or violence exposure rates. A total of 136 articles provided data on 151,347 nurses from 160 samples. Articles were identified through a database search and by consulting reference lists of review articles that were located. Relevant data were coded by the three authors. Categories depended on the availability of at least five studies. Exposure rates were coded as percentages of nurses in the sample who reported a given type of violence. Five types of violence were physical, nonphysical, bullying, sexual harassment, and combined (type of violence was not indicated). Setting, timeframe, country, and source of violence were coded. Overall violence exposure rates were 36.4% for physical violence, 66.9% for nonphysical violence, 39.7% for bullying, and 25% for sexual harassment, with 32.7% of nurses reporting having been physically injured in an assault. Rates of exposure varied by world region (Anglo, Asia, Europe and Middle East), with the highest rates for physical violence and sexual harassment in the Anglo region, and the highest rates of nonphysical violence and bullying in the Middle East. Regions also varied in the source of violence, with patients accounting for most of it in Anglo and European regions, whereas patents' families/friends were the most common source in the Middle East. About a third of nurses worldwide indicated exposure to physical violence and bullying, about a third reported injury, about a quarter experienced sexual harassment, and about two-thirds indicated nonphysical violence. Physical violence was most prevalent in emergency

Personalized Exposure Assessment: Promising Approaches for Human Environmental Health Research

PubMed Central

Weis, Brenda K.; Balshaw, David; Barr, John R.; Brown, David; Ellisman, Mark; Lioy, Paul; Omenn, Gilbert; Potter, John D.; Smith, Martyn T.; Sohn, Lydia; Suk, William A.; Sumner, Susan; Swenberg, James; Walt, David R.; Watkins, Simon; Thompson, Claudia; Wilson, Samuel H.

2005-01-01

New technologies and methods for assessing human exposure to chemicals, dietary and lifestyle factors, infectious agents, and other stressors provide an opportunity to extend the range of human health investigations and advance our understanding of the relationship between environmental exposure and disease. An ad hoc Committee on Environmental Exposure Technology Development was convened to identify new technologies and methods for deriving personalized exposure measurements for application to environmental health studies. The committee identified a “toolbox” of methods for measuring external (environmental) and internal (biologic) exposure and assessing human behaviors that influence the likelihood of exposure to environmental agents. The methods use environmental sensors, geographic information systems, biologic sensors, toxicogenomics, and body burden (biologic) measurements. We discuss each of the methods in relation to current use in human health research; specific gaps in the development, validation, and application of the methods are highlighted. We also present a conceptual framework for moving these technologies into use and acceptance by the scientific community. The framework focuses on understanding complex human diseases using an integrated approach to exposure assessment to define particular exposure–disease relationships and the interaction of genetic and environmental factors in disease occurrence. Improved methods for exposure assessment will result in better means of monitoring and targeting intervention and prevention programs. PMID:16002370

Distribution and preliminary exposure assessment of bisphenol AF (BPAF) in various environmental matrices around a manufacturing plant in China.

PubMed

Song, Shanjun; Ruan, Ting; Wang, Thanh; Liu, Runzeng; Jiang, Guibin

2012-12-18

Increasing attention has been paid to bisphenol A and bisphenol (BP) analogues due to high production volumes, wide usage and potential adverse effects. Bisphenol AF (BPAF) is considered a new bisphenol analogue which is used as raw material in plastic industry, but little is known about its occurrence in the environment and the potential associated risk. In this work, BPAF levels and environmental distribution were reported in samples collected around a manufacturing plant and a preliminary exposure risk assessment to local residents was conducted. BPAF was detected in most of the samples, with levels in river ranging between quantitative data and quantitative structure-property relationship (QSPR) model deduction, BPAF was predicted to mainly retain in sediment and soil after released into the ambient environment and organic carbon was the domain factor during the process. The preliminary BPAF exposure assessment based on the CSOIL model suggested that children could have higher intake of BPAF than adults through inhalation of soils, dermal exposure by soils contact and bathing with well water.

Comparison of expert and job-exposure matrix-based retrospective exposure assessment of occupational carcinogens in The Netherlands Cohort Study.

PubMed

Offermans, Nadine S M; Vermeulen, Roel; Burdorf, Alex; Peters, Susan; Goldbohm, R Alexandra; Koeman, Tom; van Tongeren, Martie; Kauppinen, T; Kant, Ijmert; Kromhout, Hans; van den Brandt, Piet A

2012-10-01

Reliable retrospective exposure assessment continues to be a challenge in most population-based studies. Several methodologies exist for estimating exposures retrospectively, of which case-by-case expert assessment and job-exposure matrices (JEMs) are commonly used. This study evaluated the reliability of exposure estimates for selected carcinogens obtained through three JEMs by comparing the estimates with case-by-case expert assessment within the Netherlands Cohort Study (NLCS). The NLCS includes 58,279 men aged 55-69 years at enrolment in 1986. For a subcohort of these men (n=1630), expert assessment is available for exposure to asbestos, polycyclic aromatic hydrocarbons (PAHs) and welding fumes. Reliability of the different JEMs (DOMJEM (asbestos, PAHs), FINJEM (asbestos, PAHs and welding fumes) and Asbestos JEM (asbestos) was determined by assessing the agreement between these JEMs and the expert assessment. Expert assessment revealed the lowest prevalence of exposure for all three exposures (asbestos 9.3%; PAHs 5.3%; welding fumes 11.7%). The DOMJEM showed the highest level of agreement with the expert assessment for asbestos and PAHs (κs=0.29 and 0.42, respectively), closely followed by the FINJEM. For welding fumes, concordance between the expert assessment and FINJEM was high (κ=0.70). The Asbestos JEM showed poor agreement with the expert asbestos assessment (κ=0.10). This study shows case-by-case expert assessment to result in the lowest prevalence of occupational exposure in the NLCS. Furthermore, the DOMJEM and FINJEM proved to be rather similar in agreement when compared with the expert assessment. The Asbestos JEM appeared to be less appropriate for use in the NLCS.

Rule-based exposure assessment versus case-by-case expert assessment using the same information in a community-based study.

PubMed

Peters, Susan; Glass, Deborah C; Milne, Elizabeth; Fritschi, Lin

2014-03-01

Retrospective exposure assessment in community-based studies is largely reliant on questionnaire information. Expert assessment is often used to assess lifetime occupational exposures, but these assessments generally lack transparency and are very time-consuming. We explored the agreement between a rule-based assessment approach and case-by-case expert assessment of occupational exposures in a community-based study. We used data from a case-control study of childhood acute lymphoblastic leukaemia in which parental occupational exposures were originally assigned by expert assessment. Key questions were identified from the completed parent questionnaires and, on the basis of these, rules were written to assign exposure levels to diesel exhaust, pesticides and solvents. We estimated exposure prevalence separately for fathers and mothers, and used κ statistics to assess the agreement between the two exposure assessment methods. Exposures were assigned to 5829 jobs among 1079 men and 6189 jobs among 1234 women. For both sexes, agreement was good for the two assessment methods of exposure to diesel exhaust at a job level (κ=0.70 for men and κ=0.71 for women) and at a person level (κ=0.74 and κ=0.75). The agreement was good to excellent for pesticide exposure among men (κ=0.74 for jobs and κ=0.84 at a person level) and women (κ=0.68 and κ=0.71 at a job and person level, respectively). Moderate to good agreement was observed for assessment of solvent exposure, which was better for women than men. The rule-based assessment approach appeared to be an efficient alternative for assigning occupational exposures in a community-based study for a selection of occupational exposures.

A Biomonitoring Framework to Support Exposure and Risk Assessments

EPA Science Inventory

Background - Biomonitoring is used in exposure and risk assessments to reduce uncertainties along the source-to-outcome continuum. Specifically, biomarkers can help identify exposure sources, routes, and distributions, and reflect kinetic and dynamic processes following exposure ...

Indirect Dietary Residential Exposure Assessment Model (IDREAM) Implementation

EPA Pesticide Factsheets

The Indirect Dietary Residential Exposure Assessment Model (IDREAM) estimates indirect ingestion exposure to disinfectants used in residential settings on hard surfaces where there may be inadvertent transfer to edible items prepared on those surfaces.

A framework for organizing and selecting quantitative approaches for benefit-harm assessment.

PubMed

Puhan, Milo A; Singh, Sonal; Weiss, Carlos O; Varadhan, Ravi; Boyd, Cynthia M

2012-11-19

Several quantitative approaches for benefit-harm assessment of health care interventions exist but it is unclear how the approaches differ. Our aim was to review existing quantitative approaches for benefit-harm assessment and to develop an organizing framework that clarifies differences and aids selection of quantitative approaches for a particular benefit-harm assessment. We performed a review of the literature to identify quantitative approaches for benefit-harm assessment. Our team, consisting of clinicians, epidemiologists, and statisticians, discussed the approaches and identified their key characteristics. We developed a framework that helps investigators select quantitative approaches for benefit-harm assessment that are appropriate for a particular decisionmaking context. Our framework for selecting quantitative approaches requires a concise definition of the treatment comparison and population of interest, identification of key benefit and harm outcomes, and determination of the need for a measure that puts all outcomes on a single scale (which we call a benefit and harm comparison metric). We identified 16 quantitative approaches for benefit-harm assessment. These approaches can be categorized into those that consider single or multiple key benefit and harm outcomes, and those that use a benefit-harm comparison metric or not. Most approaches use aggregate data and can be used in the context of single studies or systematic reviews. Although the majority of approaches provides a benefit and harm comparison metric, only four approaches provide measures of uncertainty around the benefit and harm comparison metric (such as a 95 percent confidence interval). None of the approaches considers the actual joint distribution of benefit and harm outcomes, but one approach considers competing risks when calculating profile-specific event rates. Nine approaches explicitly allow incorporating patient preferences. The choice of quantitative approaches depends on the

A framework for organizing and selecting quantitative approaches for benefit-harm assessment

PubMed Central

2012-01-01

Background Several quantitative approaches for benefit-harm assessment of health care interventions exist but it is unclear how the approaches differ. Our aim was to review existing quantitative approaches for benefit-harm assessment and to develop an organizing framework that clarifies differences and aids selection of quantitative approaches for a particular benefit-harm assessment. Methods We performed a review of the literature to identify quantitative approaches for benefit-harm assessment. Our team, consisting of clinicians, epidemiologists, and statisticians, discussed the approaches and identified their key characteristics. We developed a framework that helps investigators select quantitative approaches for benefit-harm assessment that are appropriate for a particular decisionmaking context. Results Our framework for selecting quantitative approaches requires a concise definition of the treatment comparison and population of interest, identification of key benefit and harm outcomes, and determination of the need for a measure that puts all outcomes on a single scale (which we call a benefit and harm comparison metric). We identified 16 quantitative approaches for benefit-harm assessment. These approaches can be categorized into those that consider single or multiple key benefit and harm outcomes, and those that use a benefit-harm comparison metric or not. Most approaches use aggregate data and can be used in the context of single studies or systematic reviews. Although the majority of approaches provides a benefit and harm comparison metric, only four approaches provide measures of uncertainty around the benefit and harm comparison metric (such as a 95 percent confidence interval). None of the approaches considers the actual joint distribution of benefit and harm outcomes, but one approach considers competing risks when calculating profile-specific event rates. Nine approaches explicitly allow incorporating patient preferences. Conclusion The choice of

Physical Activity, a Critical Exposure Factor of Environmental Pollution in Children and Adolescents Health Risk Assessment

PubMed Central

Zhang, Su; Xia, Li; Yu, Yi; Hu, Shuangshuang; Sun, Jingyu; Zhou, Ping; Chen, Peijie

2018-01-01

It is an extremely urgent problem that physical fitness promotion must face not only the increasing air pollution but also the decline of physical activity level of children and adolescents worldwide at present, which is the major reason that forms an inactive lifestyle and does harm to adolescents’ health. Thus, it is necessary to focus on the exposure factor in environmental health risk assessment (EHRA) which conducts supervision of environmental pollution and survey of adolescents’ activity patterns according to the harmful characteristics of air pollutant and relationship between dose and response. Some countries, such as USA, Canada and Australia, regard both respiratory rate and physical activity pattern as main exposure factors for adolescents in both air pollution health risk assessment and exercise risk assessment to forecast a safe exposing condition of pollutant for adolescents while they are doing exercise outdoors. In addition, it suggests that the testing indexes and testing methods of these two exposure factors, such as investigating the time of daily physical activity, strength, and characteristic of frequency, help to set up the quantitative relationship between environmental pollution index and the time, strength, frequency of daily activities, and formulate children’s and adolescents’ activity instructions under different levels of environmental pollutions. As smog becomes increasingly serious at present, it is meaningful to take physical activity as a critical composition of exposure factor and establish physical activity guideline, so as to reduce the risk of air pollution, and promote physical health of children and adolescents effectively. PMID:29360730

Quantitative methods for stochastic high frequency spatio-temporal and non-linear analysis: Assessing health effects of exposure to extreme ambient temperature

NASA Astrophysics Data System (ADS)

Liss, Alexander

Extreme weather events, such as heat waves and cold spells, cause substantial excess mortality and morbidity in the vulnerable elderly population, and cost billions of dollars. The accurate and reliable assessment of adverse effects of extreme weather events on human health is crucial for environmental scientists, economists, and public health officials to ensure proper protection of vulnerable populations and efficient allocation of scarce resources. However, the methodology for the analysis of large national databases is yet to be developed. The overarching objective of this dissertation is to examine the effect of extreme weather on the elderly population of the Conterminous US (ConUS) with respect to seasonality in temperature in different climatic regions by utilizing heterogeneous high frequency and spatio-temporal resolution data. To achieve these goals the author: 1) incorporated dissimilar stochastic high frequency big data streams and distinct data types into the integrated data base for use in analytical and decision support frameworks; 2) created an automated climate regionalization system based on remote sensing and machine learning to define climate regions for the Conterminous US; 3) systematically surveyed the current state of the art and identified existing gaps in the scientific knowledge; 4) assessed the dose-response relationship of exposure to temperature extremes on human health in relatively homogeneous climate regions using different statistical models, such as parametric and non-parametric, contemporaneous and asynchronous, applied to the same data; 5) assessed seasonal peak timing and synchronization delay of the exposure and the disease within the framework of contemporaneous high frequency harmonic time series analysis and modification of the effect by the regional climate; 6) modeled using hyperbolic functional form non-linear properties of the effect of exposure to extreme temperature on human health. The proposed climate

Added value of experts' knowledge to improve a quantitative microbial exposure assessment model--Application to aseptic-UHT food products.

PubMed

Pujol, Laure; Johnson, Nicholas Brian; Magras, Catherine; Albert, Isabelle; Membré, Jeanne-Marie

2015-10-15

In a previous study, a quantitative microbial exposure assessment (QMEA) model applied to an aseptic-UHT food process was developed [Pujol, L., Albert, I., Magras, C., Johnson, N. B., Membré, J. M. Probabilistic exposure assessment model to estimate aseptic UHT product failure rate. 2015 International Journal of Food Microbiology. 192, 124-141]. It quantified Sterility Failure Rate (SFR) associated with Bacillus cereus and Geobacillus stearothermophilus per process module (nine modules in total from raw material reception to end-product storage). Previously, the probabilistic model inputs were set by experts (using knowledge and in-house data). However, only the variability dimension was taken into account. The model was then improved using expert elicitation knowledge in two ways. First, the model was refined by adding the uncertainty dimension to the probabilistic inputs, enabling to set a second order Monte Carlo analysis. The eight following inputs, and their impact on SFR, are presented in detail in this present study: D-value for each bacteria of interest (B. cereus and G. stearothermophilus) associated with the inactivation model for the UHT treatment step, i.e., two inputs; log reduction (decimal reduction) number associated with the inactivation model for the packaging sterilization step for each bacterium and each part of the packaging (product container and sealing component), i.e., four inputs; and bacterial spore air load of the aseptic tank and the filler cabinet rooms, i.e., two inputs. Second, the model was improved by leveraging expert knowledge to develop further the existing model. The proportion of bacteria in the product which settled on surface of pipes (between the UHT treatment and the aseptic tank on one hand, and between the aseptic tank and the filler cabinet on the other hand) leading to a possible biofilm formation for each bacterium, was better characterized. It was modeled as a function of the hygienic design level of the aseptic

ASSESSMENT OF DIOXIN INHALATION EXPOSURES AND ...

EPA Pesticide Factsheets

In the days following the September 11, 2001, terrorist attack on New York City's World Trade Center (WTC) towers, EPA, other federal agencies, and New York City and New York State public health and environmental authorities initiated numerous air monitoring activities to better understand the ongoing impact of emissions from that disaster. Using these data, EPA conducted an inhalation exposure and human health risk assessment. The overall evaluation focused on particulate matter, metals, polychlorinated biphenyls, dioxin-like compounds, asbestos, and volatile organic compounds. This paper reports on the analysis of dioxin-like compounds only.Lorber, M. 2003. Assessment of Dioxin Inhalation Exposures and Potential Health Impacts Following the Collapse of the World Trade Center Towers. Organohalogen Compounds 63 (no page numbers). journal article

THE ROLE OF EXPOSURE ANALYSIS IN HUMAN HEALTH RISK ASSESSMENT

EPA Science Inventory

This presentation will cover the basic methodologies used for assessing human exposures to environmental pollutants, and some of the scientific challenges involved in conducting exposure and risk assessments in support of regulatory evaluations.

Exposure Assessment Tools by Tiers and Types - Screening-Level and Refined

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

The influence of fire exposure on austenitic stainless steel for pressure vessel fitness-for-service assessment: Experimental research

NASA Astrophysics Data System (ADS)

Li, Bo; Shu, Wenhua; Zuo, Yantian

2017-04-01

The austenitic stainless steels are widely applied to pressure vessel manufacturing. The fire accident risk exists in almost all the industrial chemical plants. It is necessary to make safety evaluation on the chemical equipment including pressure vessels after fire. Therefore, the present research was conducted on the influences of fire exposure testing under different thermal conditions on the mechanical performance evolution of S30408 austenitic stainless steel for pressure vessel equipment. The metallurgical analysis described typical appearances in micro-structure observed in the material suffered by fire exposure. Moreover, the quantitative degradation of mechanical properties was investigated. The material thermal degradation mechanism and fitness-for-service assessment process of fire damage were further discussed.

Retrospective assessment of solvent exposure in paint manufacturing.

PubMed Central

Glass, D C; Spurgeon, A; Calvert, I A; Clark, J L; Harrington, J M

1994-01-01

This paper describes how exposure to solvents at two large paint making sites was assessed in a study carried out to investigate the possibility of neuropsychological effects resulting from long term exposure to organic solvents. A job exposure matrix was constructed by buildings and year. A detailed plant history was taken and this was used to identify uniform exposure periods during which workers' exposure to solvents was not thought to have changed significantly. Exposure monitoring data, collected by the company before the study, was then used to characterise exposure within each uniform exposure period. Estimates were made for periods during which no air monitoring was available. Individual detailed job histories were collected for subjects and controls. The job histories were used to estimate exposure on an individual basis with the job exposure matrix. Exposure was expressed as duration, cumulative dose, and intensity of exposure. Classification of exposure by duration alone was found to result in misclassification of subjects. PMID:7951794

Exposure Assessment Tools by Approaches - Direct Measurement (Point-of-Contact Measurement)

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases, mode

Probabilistic assessment of wildfire hazard and municipal watershed exposure

Treesearch

Joe Scott; Don Helmbrecht; Matthew P. Thompson; David E. Calkin; Kate Marcille

2012-01-01

The occurrence of wildfires within municipal watersheds can result in significant impacts to water quality and ultimately human health and safety. In this paper, we illustrate the application of geospatial analysis and burn probability modeling to assess the exposure of municipal watersheds to wildfire. Our assessment of wildfire exposure consists of two primary...

[Application of three risk assessment models in occupational health risk assessment of dimethylformamide].

PubMed

Wu, Z J; Xu, B; Jiang, H; Zheng, M; Zhang, M; Zhao, W J; Cheng, J

2016-08-20

Objective: To investigate the application of United States Environmental Protection Agency (EPA) inhalation risk assessment model, Singapore semi-quantitative risk assessment model, and occupational hazards risk assessment index method in occupational health risk in enterprises using dimethylformamide (DMF) in a certain area in Jiangsu, China, and to put forward related risk control measures. Methods: The industries involving DMF exposure in Jiangsu province were chosen as the evaluation objects in 2013 and three risk assessment models were used in the evaluation. EPA inhalation risk assessment model: HQ=EC/RfC; Singapore semi-quantitative risk assessment model: Risk= (HR×ER) 1/2 ; Occupational hazards risk assessment index=2 Health effect level ×2 exposure ratio ×Operation condition level. Results: The results of hazard quotient (HQ>1) from EPA inhalation risk assessment model suggested that all the workshops (dry method, wet method and printing) and work positions (pasting, burdening, unreeling, rolling, assisting) were high risk. The results of Singapore semi-quantitative risk assessment model indicated that the workshop risk level of dry method, wet method and printing were 3.5 (high) , 3.5 (high) and 2.8 (general) , and position risk level of pasting, burdening, unreeling, rolling, assisting were 4 (high) , 4 (high) , 2.8 (general) , 2.8 (general) and 2.8 (general) . The results of occupational hazards risk assessment index method demonstrated that the position risk index of pasting, burdening, unreeling, rolling, assisting were 42 (high) , 33 (high) , 23 (middle) , 21 (middle) and 22 (middle) . The results of Singapore semi-quantitative risk assessment model and occupational hazards risk assessment index method were similar, while EPA inhalation risk assessment model indicated all the workshops and positions were high risk. Conclusion: The occupational hazards risk assessment index method fully considers health effects, exposure, and operating conditions

Quantitative aspects of radon daughter exposure and lung cancer in underground miners.

PubMed Central

Edling, C; Axelson, O

1983-01-01

Epidemiological studies have shown an excessive incidence of lung cancer in miners with exposure to radon daughters. The various risk estimates have ranged from six to 47 excess cases per 10(6) person years and working level month, but the effect of smoking has not been fully evaluated. The present study, among a group of iron ore miners, is an attempt to obtain quantitative information about the risk of lung cancer due to radon and its daughters among smoking and non-smoking miners. The results show a considerable risk for miners to develop lung cancer; even non-smoking miners seem to be at a rather high risk. An additive effect of smoking and exposure to radon daughters is indicated and an estimate of about 30-40 excess cases per 10(6) person years and working level month seems to apply on a life time basis to both smoking and non-smoking miners aged over 50. PMID:6830715

The Future of Exposure Assessment: Perspectives from the ...

EPA Pesticide Factsheets

The British Occupational Hygiene Society, in collaboration with the Institute of Occupational Medicine, the University of Manchester, the UK Health and Safety Executive, and the University of Aberdeen hosted the 7th International Conference on the Science of Exposure Assessment (X2012) on 2 July–5 July 2012 in Edinburgh, UK. The conference ended with a special session at which invited speakers from government, industry, independent research institutes, and academia were asked to reflect on the conference and discuss what may now constitute the important highlights or drivers of future exposure assessment research. This article summarizes these discussions with respect to current and future technical and methodological developments. For the exposure science community to continue to have an impact in protecting public health, additional efforts need to be made to improve partnerships and cross-disciplinary collaborations, although it is equally important to ensure that the traditional occupational exposure themes are still covered as these issues are becoming increasingly important in the developing world. To facilitate this the ‘X’ conferences should continue to retain a holistic approach to occupational and non-occupational exposures and should actively pursue collaborations with other disciplines and professional organizations to increase the presence of consumer and environmental exposure scientists. The National Exposure Research Laboratory′s (NERL′

Towards quantitative condition assessment of biodiversity outcomes: Insights from Australian marine protected areas.

PubMed

Addison, Prue F E; Flander, Louisa B; Cook, Carly N

2017-08-01

Protected area management effectiveness (PAME) evaluation is increasingly undertaken to evaluate governance, assess conservation outcomes and inform evidence-based management of protected areas (PAs). Within PAME, quantitative approaches to assess biodiversity outcomes are now emerging, where biological monitoring data are directly assessed against quantitative (numerically defined) condition categories (termed quantitative condition assessments). However, more commonly qualitative condition assessments are employed in PAME, which use descriptive condition categories and are evaluated largely with expert judgement that can be subject to a range of biases, such as linguistic uncertainty and overconfidence. Despite the benefits of increased transparency and repeatability of evaluations, quantitative condition assessments are rarely used in PAME. To understand why, we interviewed practitioners from all Australian marine protected area (MPA) networks, which have access to long-term biological monitoring data and are developing or conducting PAME evaluations. Our research revealed that there is a desire within management agencies to implement quantitative condition assessment of biodiversity outcomes in Australian MPAs. However, practitioners report many challenges in transitioning from undertaking qualitative to quantitative condition assessments of biodiversity outcomes, which are hampering progress. Challenges include a lack of agency capacity (staff numbers and money), knowledge gaps, and diminishing public and political support for PAs. We point to opportunities to target strategies that will assist agencies overcome these challenges, including new decision support tools, approaches to better finance conservation efforts, and to promote more management relevant science. While a single solution is unlikely to achieve full evidence-based conservation, we suggest ways for agencies to target strategies and advance PAME evaluations toward best practice. Copyright �

A Quantitative Ecological Risk Assessment of the Toxicological Risks from Exxon Valdez Subsurface Oil Residues to Sea Otters at Northern Knight Island, Prince William Sound, Alaska

PubMed Central

Harwell, Mark A.; Gentile, John H.; Johnson, Charles B.; Garshelis, David L.; Parker, Keith R.

2010-01-01

A comprehensive, quantitative risk assessment is presented of the toxicological risks from buried Exxon Valdez subsurface oil residues (SSOR) to a subpopulation of sea otters (Enhydra lutris) at Northern Knight Island (NKI) in Prince William Sound, Alaska, as it has been asserted that this subpopulation of sea otters may be experiencing adverse effects from the SSOR. The central questions in this study are: could the risk to NKI sea otters from exposure to polycyclic aromatic hydrocarbons (PAHs) in SSOR, as characterized in 2001–2003, result in individual health effects, and, if so, could that exposure cause subpopulation-level effects? We follow the U.S. Environmental Protection Agency (USEPA) risk paradigm by: (a) identifying potential routes of exposure to PAHs from SSOR; (b) developing a quantitative simulation model of exposures using the best available scientific information; (c) developing scenarios based on calculated probabilities of sea otter exposures to SSOR; (d) simulating exposures for 500,000 modeled sea otters and extracting the 99.9% quantile most highly exposed individuals; and (e) comparing projected exposures to chronic toxicity reference values. Results indicate that, even under conservative assumptions in the model, maximum-exposed sea otters would not receive a dose of PAHs sufficient to cause any health effects; consequently, no plausible toxicological risk exists from SSOR to the sea otter subpopulation at NKI. PMID:20862194

Human Health Exposure Assessment for Rocky Mountain Arsenal. Volume 8. Response to Comments on the Draft Exposure Assessment Version 4.1

DTIC Science & Technology

1990-09-01

ASSESSMENT (INCLUDES ARMY AND SHELL TOXICITY PROFILES). VOL. 41V - PPLV METHODOLOGY. VOL. V - PPLV CALCULATIONS. VOL. VI - STUDY AREA EXPOSURE ANALYSIS (A...INTRODUCTION, B WESTERN STUDY AREA, C SOUTHERN STUDY AREA, D NORTHERN CENTRAL STUDY AREA, E CENTRAL STUDY AREA, F EASTERN STUDY AREA, G SOUTH PLANTS... STUDY AREA, AND H NORTH PLANTS STUDY AREA. VOL. VII - SUMMARY EXPOSURE ASSESSMENT. VOL. VIII - 14. SUBJECT TERMS 15. NUMBER OF PAGES PPLV, LAND USE

Relationship between cardiopulmonary mortality and cancer risk and quantitative exposure to polycyclic aromatic hydrocarbons, fluorides, and dust in two prebake aluminum smelters.

PubMed

Friesen, Melissa C; Benke, Geza; Del Monaco, Anthony; Dennekamp, Martine; Fritschi, Lin; de Klerk, Nick; Hoving, Jan L; MacFarlane, Ewan; Sim, Malcolm R

2009-08-01

We examined the risk of mortality and cancer incidence with quantitative exposure to benzene-soluble fraction (BSF), benzo(a)pyrene (BaP), fluoride, and inhalable dust in two Australian prebake smelters. A total of 4,316 male smelter workers were linked to mortality and cancer incidence registries and followed from 1983 through 2002 (mean follow-up: 15.9 years, maximum: 20 years). Internal comparisons using Poisson regression were undertaken based on quantitative exposure levels. Smoking-adjusted, monotonic relationships were observed between respiratory cancer and cumulative inhalable dust exposure (trend p = 0.1), cumulative fluoride exposure (p = 0.1), and cumulative BaP exposure (p = 0.2). The exposure-response trends were stronger when examined across the exposed categories (BaP p = 0.1; inhalable dust p = 0.04). A monotonic, but not statistically significant trend was observed between cumulative BaP exposure and stomach cancer (n = 14). Bladder cancer was not associated with BaP or BSF exposure. No other cancer and no mortality outcomes were associated with these smelter exposures. The carcinogenicity of Söderberg smelter exposures is well established; in these prebake smelters we observed an association between smelter exposures and respiratory cancer, but not bladder cancer. The exploratory finding for stomach cancer needs confirmation. These results are preliminary due to the young cohort and short follow-up time.

Assessment of Population and Microenvironmental Exposure to Fine Particulate Matter (PM2.5)

NASA Astrophysics Data System (ADS)

Jiao, Wan

A positive relationship exists between fine particulate matter (PM 2.5) exposure and adverse health effects. PM2.5 concentration-response functions used in the quantitative risk assessment were based on findings from human epidemiological studies that relied on areawide ambient concentrations as surrogate for actual ambient exposure, which cannot capture the spatial and temporal variability in human exposures. The goal of the study is to assess inter-individual, geographic and seasonal variability in population exposures to inform the interpretation of available epidemiological studies, and to improve the understanding of how exposure-related factors in important exposure microenvironments contribute to the variability in individual PM2.5 exposure. Typically, the largest percentage of time in which an individual is exposed to PM2.5 of ambient origin occurs in indoor residence, and the highest ambient PM2.5 concentrations occur in transportation microenvironments because of the proximity to on-road traffic emissions. Therefore, indoor residence and traffic-related transportation microenvironments were selected for further assessment in the study. Population distributions of individual daily PM2.5 exposures were estimated for the selected regions and seasons using the Stochastic Human Exposure and Dose Simulation Model for Particulate Matter (SHEDS-PM). For the indoor residence, the current practice by assuming the entire residence to be one large single zone for calculating the indoor residential PM 2.5 concentration was evaluated by applying an indoor air quality model, RISK, to compare indoor PM2.5 concentrations between single-zone and multi-zone scenarios. For the transportation microenvironments, one field data collection focused on in-vehicle microenvironment and was conducted to quantify the variability in the in-vehicle PM2.5 concentration with respect to the outside vehicle concentration for a wide range of conditions that affect intra-vehicle variability

Occupational exposure limits for nanomaterials: state of the art

NASA Astrophysics Data System (ADS)

Schulte, P. A.; Murashov, V.; Zumwalde, R.; Kuempel, E. D.; Geraci, C. L.

2010-08-01

Assessing the need for and effectiveness of controlling airborne exposures to engineered nanomaterials in the workplace is difficult in the absence of occupational exposure limits (OELs). At present, there are practically no OELs specific to nanomaterials that have been adopted or promulgated by authoritative standards and guidance organizations. The vast heterogeneity of nanomaterials limits the number of specific OELs that are likely to be developed in the near future, but OELs could be developed more expeditiously for nanomaterials by applying dose-response data generated from animal studies for specific nanoparticles across categories of nanomaterials with similar properties and modes of action. This article reviews the history, context, and approaches for developing OELs for particles in general and nanoparticles in particular. Examples of approaches for developing OELs for titanium dioxide and carbon nanotubes are presented and interim OELs from various organizations for some nanomaterials are discussed. When adequate dose-response data are available in animals or humans, quantitative risk assessment methods can provide estimates of adverse health risk of nanomaterials in workers and, in conjunction with workplace exposure and control data, provide a basis for determining appropriate exposure limits. In the absence of adequate quantitative data, qualitative approaches to hazard assessment, exposure control, and safe work practices are prudent measures to reduce hazards in workers.

Technical Overview of Ecological Risk Assessment - Analysis Phase: Exposure Characterization

EPA Pesticide Factsheets

Exposure Characterization is the second major component of the analysis phase of a risk assessment. For a pesticide risk assessment, the exposure characterization describes the potential or actual contact of a pesticide with a plant, animal, or media.

Is There a Safe Level of Exposure to a Carcinogen?

ERIC Educational Resources Information Center

Hrudey, Steve E.; Krewski, Daniel

1995-01-01

Presents an approach to estimating the "safe" levels of low-dose exposure to carcinogens that involves working upward from the smallest conceivable chronic dose instead of extrapolating downward from high exposures. Discusses expert and public opinion and other issues related to quantitative cancer risk assessment. (LZ)

Approaches to Children’s Exposure Assessment: Case Study with Diethylhexylphthalate (DEHP)

PubMed Central

Ginsberg, Gary; Ginsberg, Justine; Foos, Brenda

2016-01-01

Children’s exposure assessment is a key input into epidemiology studies, risk assessment and source apportionment. The goals of this article are to describe a methodology for children’s exposure assessment that can be used for these purposes and to apply the methodology to source apportionment for the case study chemical, diethylhexylphthalate (DEHP). A key feature is the comparison of total (aggregate) exposure calculated via a pathways approach to that derived from a biomonitoring approach. The 4-step methodology and its results for DEHP are: (1) Prioritization of life stages and exposure pathways, with pregnancy, breast-fed infants, and toddlers the focus of the case study and pathways selected that are relevant to these groups; (2) Estimation of pathway-specific exposures by life stage wherein diet was found to be the largest contributor for pregnant women, breast milk and mouthing behavior for the nursing infant and diet, house dust, and mouthing for toddlers; (3) Comparison of aggregate exposure by pathways vs biomonitoring-based approaches wherein good concordance was found for toddlers and pregnant women providing confidence in the exposure assessment; (4) Source apportionment in which DEHP presence in foods, children’s products, consumer products and the built environment are discussed with respect to early life mouthing, house dust and dietary exposure. A potential fifth step of the method involves the calculation of exposure doses for risk assessment which is described but outside the scope for the current case study. In summary, the methodology has been used to synthesize the available information to identify key sources of early life exposure to DEHP. PMID:27376320

Task-based exposure assessment of nanoparticles in the workplace

NASA Astrophysics Data System (ADS)

Ham, Seunghon; Yoon, Chungsik; Lee, Euiseung; Lee, Kiyoung; Park, Donguk; Chung, Eunkyo; Kim, Pilje; Lee, Byoungcheun

2012-09-01

Although task-based sampling is, theoretically, a plausible approach to the assessment of nanoparticle exposure, few studies using this type of sampling have been published. This study characterized and compared task-based nanoparticle exposure profiles for engineered nanoparticle manufacturing workplaces (ENMW) and workplaces that generated welding fumes containing incidental nanoparticles. Two ENMW and two welding workplaces were selected for exposure assessments. Real-time devices were utilized to characterize the concentration profiles and size distributions of airborne nanoparticles. Filter-based sampling was performed to measure time-weighted average (TWA) concentrations, and off-line analysis was performed using an electron microscope. Workplace tasks were recorded by researchers to determine the concentration profiles associated with particular tasks/events. This study demonstrated that exposure profiles differ greatly in terms of concentrations and size distributions according to the task performed. The size distributions recorded during tasks were different from both those recorded during periods with no activity and from the background. The airborne concentration profiles of the nanoparticles varied according to not only the type of workplace but also the concentration metrics. The concentrations measured by surface area and the number concentrations measured by condensation particle counter, particulate matter 1.0, and TWA mass concentrations all showed a similar pattern, whereas the number concentrations measured by scanning mobility particle sizer indicated that the welding fume concentrations at one of the welding workplaces were unexpectedly higher than were those at workplaces that were engineering nanoparticles. This study suggests that a task-based exposure assessment can provide useful information regarding the exposure profiles of nanoparticles and can therefore be used as an exposure assessment tool.

Validation of a semi-quantitative job exposure matrix at a Söderberg aluminum smelter.

PubMed

Friesen, M C; Demers, P A; Spinelli, J J; Le, N D

2003-08-01

We tested the validity of a job exposure matrix (JEM) for coal tar pitch volatiles (CTPV) at a Söderberg aluminum smelter. The JEM had been developed by a committee of company hygienists and union representatives for an earlier study of cancer incidence and mortality. Our aim was to test the validity and reliability of the expert-based assignments. Personal CTPV exposure measurements (n = 1879) overlapped 11 yr of the JEM. The arithmetic mean was calculated for 35 job/time period combinations (35% of the exposed work history), categorized using the original exposure intervals, and compared with the expert-based assignments. The expert-based and the measurement-based exposure assignments were only moderately correlated (Spearman's rho = 0.42; weighted kappa = 0.39, CI 0.10-0.69). Only 40% of the expert-based medium category assignments were correctly assigned, with better agreement in the low (84%) and high (100%) categories. Pot operation jobs exhibited better agreement (rho = 0.60) than the maintenance and pot shell repair jobs (rho = 0.25). The mid-point value of the medium category was overestimated by 0.3 mg/m(3). The expert-based exposure assignments may be improved by better characterizing the transitions between exposure categories, by accounting for exposure differences between pot lines and by re-examining the category mid-point values used in calculating the cumulative exposure. Lack of historical exposure measurements often requires reliance on expert knowledge to assess exposure levels. Validating the experts' estimates against available exposure measurements may help to identify weaknesses in the exposure assessment where improvements may be possible, as was shown here.

Biodegradation kinetics for pesticide exposure assessment.

PubMed

Wolt, J D; Nelson, H P; Cleveland, C B; van Wesenbeeck, I J

2001-01-01

Understanding pesticide risks requires characterizing pesticide exposure within the environment in a manner that can be broadly generalized across widely varied conditions of use. The coupled processes of sorption and soil degradation are especially important for understanding the potential environmental exposure of pesticides. The data obtained from degradation studies are inherently variable and, when limited in extent, lend uncertainty to exposure characterization and risk assessment. Pesticide decline in soils reflects dynamically coupled processes of sorption and degradation that add complexity to the treatment of soil biodegradation data from a kinetic perspective. Additional complexity arises from study design limitations that may not fully account for the decline in microbial activity of test systems, or that may be inadequate for considerations of all potential dissipation routes for a given pesticide. Accordingly, kinetic treatment of data must accommodate a variety of differing approaches starting with very simple assumptions as to reaction dynamics and extending to more involved treatments if warranted by the available experimental data. Selection of the appropriate kinetic model to describe pesticide degradation should rely on statistical evaluation of the data fit to ensure that the models used are not overparameterized. Recognizing the effects of experimental conditions and methods for kinetic treatment of degradation data is critical for making appropriate comparisons among pesticide biodegradation data sets. Assessment of variability in soil half-life among soils is uncertain because for many pesticides the data on soil degradation rate are limited to one or two soils. Reasonable upper-bound estimates of soil half-life are necessary in risk assessment so that estimated environmental concentrations can be developed from exposure models. Thus, an understanding of the variable and uncertain distribution of soil half-lives in the environment is

Chemical Mixtures Health Risk Assessment: Overview of Exposure Assessment, Whole Mixtures Assessments; Basic Concepts

EPA Science Inventory

This problems-based, half-day, introductory workshop focuses on methods to assess health risks posed by exposures to chemical mixtures in the environment. Chemical mixtures health risk assessment methods continue to be developed and evolve to address concerns over health risks f...

INDIRECT EXPOSURE ASSESSMENT AT THE U.S. EPA

EPA Science Inventory

In the early 1980s, exposures and subsequent health impact assessments from contaminants emitted into the air from stationary sources focused on the inhalation pathway. This 'direct' pathway of exposure was thought to be the most critical pathway, as it is for many contaminants. ...

Exposure assessment of dioxins and dioxin-like PCBs in pasteurised bovine milk using probabilistic modelling.

PubMed

Adekunte, Adefunke O; Tiwari, Brijesh K; O'Donnell, Colm P

2010-09-01

Quantitative exposure assessment is a useful technique to investigate the risk from contaminants in the food chain. The objective of this study was to develop a probabilistic exposure assessment model for dioxins (PCDD/Fs) and dioxin-like PCBs (DL-PCBs) in pasteurised bovine milk. Mean dioxins and DL-PCBs (non-ortho and mono-ortho PCBs) concentrations (pg WHO-TEQ g(-1)) in bovine milk were estimated as 0.06 ± 0.07 pg WHO-TEQ g(-1) for dioxins and 0.08 ± 0.07 pg WHO-TEQ g(-1) for DL-PCBs using Monte Carlo simulation. The simulated model estimated mean exposure for dioxins was 0.19 ± 0.29 pg WHO-TEQ kg(-1)bw d(-1) and 0.14 ± 0.22 pg WHO-TEQ kg(-1) bw d(-1) and for DL-PCBs was 0.25 ± 0.30 pg WHO-TEQ kg(-1) bw d(-1) and 0.19 ± 0.22 pg WHO-TEQ kg(-1) bw d(-1) for men and women, respectively. This study showed that the mean dioxins and DL-PCBs exposure from consumption of pasteurised bovine milk is below the provisional maximum tolerable monthly intake of 70 pg TEQ kg(-1) bw month(-1) (equivalent of 2.3 pg TEQ kg(-1) bw d(-1)) recommended by the Joint FAO/WHO Expert Committee on Food Additives and Contaminants (JECFA). Results from this study also showed that the estimated dioxins and DL-PCBs concentration in pasteurised bovine milk is comparable to those reported in previous studies. Copyright © 2010 Elsevier Ltd. All rights reserved.

Global and local health burden trade-off through the hybridisation of quantitative microbial risk assessment and life cycle assessment to aid water management.

PubMed

Kobayashi, Yumi; Peters, Greg M; Ashbolt, Nicholas J; Heimersson, Sara; Svanström, Magdalena; Khan, Stuart J

2015-08-01

Life cycle assessment (LCA) and quantitative risk assessment (QRA) are commonly used to evaluate potential human health impacts associated with proposed or existing infrastructure and products. Each approach has a distinct objective and, consequently, their conclusions may be inconsistent or contradictory. It is proposed that the integration of elements of QRA and LCA may provide a more holistic approach to health impact assessment. Here we examine the possibility of merging LCA assessed human health impacts with quantitative microbial risk assessment (QMRA) for waterborne pathogen impacts, expressed with the common health metric, disability adjusted life years (DALYs). The example of a recent large-scale water recycling project in Sydney, Australia was used to identify and demonstrate the potential advantages and current limitations of this approach. A comparative analysis of two scenarios - with and without the development of this project - was undertaken for this purpose. LCA and QMRA were carried out independently for the two scenarios to compare human health impacts, as measured by DALYs lost per year. LCA results suggested that construction of the project would lead to an increased number of DALYs lost per year, while estimated disease burden resulting from microbial exposures indicated that it would result in the loss of fewer DALYs per year than the alternative scenario. By merging the results of the LCA and QMRA, we demonstrate the advantages in providing a more comprehensive assessment of human disease burden for the two scenarios, in particular, the importance of considering the results of both LCA and QRA in a comparative assessment of decision alternatives to avoid problem shifting. The application of DALYs as a common measure between the two approaches was found to be useful for this purpose. Copyright © 2015 Elsevier Ltd. All rights reserved.

Pooled exposure-response analyses and risk assessment for lung cancer in 10 cohorts of silica-exposed workers: an IARC multicentre study.

PubMed

Steenland, K; Mannetje, A; Boffetta, P; Stayner, L; Attfield, M; Chen, J; Dosemeci, M; DeKlerk, N; Hnizdo, E; Koskela, R; Checkoway, H

2001-11-01

Silica is one of the most common occupational exposures worldwide. In 1997 the International Agency for Research on Cancer (IARC) classified inhaled crystalline silica as a human carcinogen (group 1), but acknowledged limitations in the epidemiologic data, including inconsistencies across studies and the lack of extensive exposure-response data. We have conducted a pooled exposure-response analysis of 10 silica-exposed cohorts to investigate lung cancer. The pooled cohort included 65,980 workers (44,160 miners, 21,820 nominees), and 1,072 lung cancer deaths (663 miners, 409 nonminers). Follow-up has been extended for five of these cohorts beyond published data. Quantitative exposure estimates by job and calendar time were adopted, modified, or developed to permit common analyses by respirable silica (mg/m3) across cohorts. The log of cumulative exposure, with a 15-year lag, was a strong predictor of lung cancer (p = 0.0001), with consistency across studies (test for heterogeneity, p = 0.34). Results for the log of cumulative exposure were consistent between underground mines and other facilities. Categorical analyses by quintile of cumulative exposure resulted in a monotonic trend with odds ratios of 1.0. 1.0, 1.3, 1.5, 1.6. Analyses using a spline curve also showed a monotonic increase in risk with increasing exposure. The estimated excess lifetime risk (through age 75) of lung cancer for a worker exposed from age 20 to 65 at 0.1 mg/m3 respirable crystalline silica (the permissible level in many countries) was 1.1-1.7%, above background risks of 3-6%. Our results support the decision by the IARC to classify inhaled silica in occupational settings as a carcinogen, and suggest that the current exposure limits in many countries may be inadequate. These data represent the first quantitative exposure-response analysis and risk assessment for silica using data from multiple studies.

Exposure assessment of microwave ovens and impact on total exposure in WLANs

PubMed Central

Plets, David; Verloock, Leen; Van Den Bossche, Matthias; Tanghe, Emmeric; Joseph, Wout; Martens, Luc

2016-01-01

In situ exposure of electric fields of 11 microwave ovens is assessed in an occupational environment and in an office. Measurements as a function of distance without load and with a load of 275 ml of tap water were performed at distances of <1 m. The maximal measured field was 55.2 V m−1 at 5 cm from the oven (without load), which is 2.5 and 1.1 times below the International Commission on Non-Ionizing Radiation Protection reference level for occupational exposure and general public exposure, respectively. For exposure at distances of >1 m, a model of the electric field in a realistic environment is proposed. In an office scenario, switching on a microwave oven increases the median field strength from 91 to 145 mV m−1 (+91 %) in a traditional Wireless Local Area Network (WLAN) deployment and from 44 to 92 mV m−1 (+109 %) in an exposure-optimised WLAN deployment. PMID:25956787

Dermal exposure assessment to benzene and toluene using charcoal cloth pads.

PubMed

van Wendel de Joode, Berna; Tielemans, Erik; Vermeulen, Roel; Wegh, Hillion; Kromhout, Hans

2005-01-01

Charcoal cloth pads have been used to assess volatile chemicals on the skin in a laboratory setting; however, they have not yet been applied to measure dermal exposure in occupational settings. This study aimed at evaluating whether charcoal pads can be used to assess dermal exposure to benzene and toluene in workers of a petrochemical plant. Inhalation and dermal exposure levels to benzene and toluene were assessed for workers of a petrochemical plant performing different jobs. Benzene uptake was assessed by determining S-phenylmercapturic acid in workers' urine samples. Dermal exposure levels on the charcoal pads were adjusted for ambient air levels of benzene and toluene by subtracting the amount of benzene or toluene measured in personal air from the amount of benzene or toluene measured on the charcoal pad. In general, measured external and internal exposure levels were low. The estimated contribution of the dermal route to internal benzene exposure levels was less than 0.06% for all jobs. Toluene personal air concentrations and benzene and toluene dermal exposure levels differed statistically significantly between job titles. For benzene, differences between jobs were larger for adjusted dermal exposures (maximum 17-fold, P = 0.02) than for inhalation exposures (maximum two-fold, P = 0.08). Also for toluene, although less clear, differences between jobs were larger for adjusted dermal exposures (maximum 23-fold, P = 0.01) as compared to inhalation exposures (maximum 10-fold, P = 0.01). Charcoal pads appeared to measure dermal exposures to benzene and toluene in addition to ambient air levels. Future studies applying charcoal cloth pads for the dermal exposure assessment at workplaces with higher dermal exposure to organic solvents may provide more insight into the biological relevance of dermal exposure levels measured by charcoal cloth pads. In addition, the design of the dermal sampler might be improved by configuring a dermal sampler, where part of the

Occupational exposure assessment: Practices in Malaysian nuclear agency

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sarowi, S. Muhd, E-mail: suzie@nuclearmalaysia.gov.my; Ramli, S. A.; Kontol, K. Mohamad

Malaysian Nuclear Agency (Nuclear Malaysia) is the leading agency in introducing and promoting the application of nuclear science technology in Malaysia. The agency provides major nuclear facilities purposely for research and commercialisation such as reactor, irradiation plants and radioisotope production laboratory. When dealing with ionizing radiation, there is an obligatory requirement to monitor and assess the radiation exposure to the workers. The personal dose of radiation workers were monitored monthly by assessing their Thermoluminescence Dosimeter (TLD) dose reading. This paper will discuss the current practice in managing, assessing, record keeping and reporting of the occupational exposure in Nuclear Malaysia includingmore » the Health Physic Group roles and challenges. The statistics on occupational radiation exposure of monitored workers working in different fields in Nuclear Malaysia from 2011 - 2013 will also be presented. The results show that the null hypothesis (H{sub 0}) was accepted which the means of every populations are all equal or not differ significantly. This hypothesis states that the dose exposure received by the radiation workers in Nuclear Malaysia is similar and there were no significant changes from 2011 to 2013. The radiation monitoring programme correlate with the requirement of our national law, the Atomic Energy Licensing Act 1984 (Act 304)« less

Occupational exposure assessment: Practices in Malaysian nuclear agency

NASA Astrophysics Data System (ADS)

Sarowi, S. Muhd; Ramli, S. A.; Kontol, K. Mohamad; Rahman, N. A. H. Abd.

2016-01-01

Malaysian Nuclear Agency (Nuclear Malaysia) is the leading agency in introducing and promoting the application of nuclear science technology in Malaysia. The agency provides major nuclear facilities purposely for research and commercialisation such as reactor, irradiation plants and radioisotope production laboratory. When dealing with ionizing radiation, there is an obligatory requirement to monitor and assess the radiation exposure to the workers. The personal dose of radiation workers were monitored monthly by assessing their Thermoluminescence Dosimeter (TLD) dose reading. This paper will discuss the current practice in managing, assessing, record keeping and reporting of the occupational exposure in Nuclear Malaysia including the Health Physic Group roles and challenges. The statistics on occupational radiation exposure of monitored workers working in different fields in Nuclear Malaysia from 2011 - 2013 will also be presented. The results show that the null hypothesis (H₀) was accepted which the means of every populations are all equal or not differ significantly. This hypothesis states that the dose exposure received by the radiation workers in Nuclear Malaysia is similar and there were no significant changes from 2011 to 2013. The radiation monitoring programme correlate with the requirement of our national law, the Atomic Energy Licensing Act 1984 (Act 304).

Exposure matrix development for the Libby cohort.

PubMed

Noonan, C W

2006-11-01

The Libby, MT, cohort includes current and former residents with potential historical exposure to asbestos-contaminated vermiculite. This cohort includes individuals with a broad range of exposure experiences and work histories. While both occupational and nonoccupational exposure pathways were found to be relevant in recent investigations of health effects among this cohort, there has not been a comprehensive approach to characterizing these varied exposure pathways. Any approach toward assessing historical exposures among this population must account for three general categories: (1) occupational exposures, (2) residential exposures, and (3) exposures related to a variety of nonoccupational activities thought to be associated with vermiculite/asbestos exposure in this community. First, a job exposure matrix is commonly used in occupational epidemiology to assess historical worker exposures, allowing for the incorporation of numerous occupational categories and weighting factors applied to specific jobs for different time periods. Second, residential exposures can best be quantified by integrating individuals' residential histories with data on environmental asbestos contamination in the community. Previous soil or sediment sampling as well as air modeling could inform estimates of time- and spatial-dependent exposure concentrations for a residential exposure matrix. Finally, exposure opportunities due to nonoccupational activities could be weighted by factors such as time, geography, environmental sampling, and an assessment of the relative importance for each pathway. These three matrices for occupational, residential, and activity exposure pathways could be combined or used separately to provide a more comprehensive and quantitative, or semiquantitative, assessment of individual exposure in future epidemiological studies of this cohort.

Assessment of Environmental Cockroach Allergen Exposure

PubMed Central

Chew, Ginger L.

2016-01-01

In the past, cockroach allergen exposure assessment mainly focused on settled dust in homes in low-income urban cities in the United States. That choice was not wrong; without measureable levels of cockroach allergen, it is difficult to show associations with any home characteristics much less with health outcomes (e.g., allergy, asthma). However, recent studies in other suburban areas, schools, and other countries have elucidated the importance of cockroach allergen in these environments too. In addition, characterizing the underlying factors that give rise to cockroach allergen exposure (or protect against it) can lead to more targeted public health interventions. This review discusses different approaches to sampling indoor environments, interprets recent asthma and allergy studies, compares cockroach allergen levels from past studies with those of recent studies, and describes strategies to decrease exposures. PMID:22825884

Helmet-Cam: tool for assessing miners’ respirable dust exposure

PubMed Central

Cecala, A.B.; Reed, W.R.; Joy, G.J.; Westmoreland, S.C.; O’Brien, A.D.

2015-01-01

Video technology coupled with datalogging exposure monitors have been used to evaluate worker exposure to different types of contaminants. However, previous application of this technology used a stationary video camera to record the worker’s activity while the worker wore some type of contaminant monitor. These techniques are not applicable to mobile workers in the mining industry because of their need to move around the operation while performing their duties. The Helmet-Cam is a recently developed exposure assessment tool that integrates a person-wearable video recorder with a datalogging dust monitor. These are worn by the miner in a backpack, safety belt or safety vest to identify areas or job tasks of elevated exposure. After a miner performs his or her job while wearing the unit, the video and dust exposure data files are downloaded to a computer and then merged together through a NIOSH-developed computer software program called Enhanced Video Analysis of Dust Exposure (EVADE). By providing synchronized playback of the merged video footage and dust exposure data, the EVADE software allows for the assessment and identification of key work areas and processes, as well as work tasks that significantly impact a worker’s personal respirable dust exposure. The Helmet-Cam technology has been tested at a number of metal/nonmetal mining operations and has proven to be a valuable assessment tool. Mining companies wishing to use this technique can purchase a commercially available video camera and an instantaneous dust monitor to obtain the necessary data, and the NIOSH-developed EVADE software will be available for download at no cost on the NIOSH website. PMID:26380529

Quantitative Procedures for the Assessment of Quality in Higher Education Institutions.

ERIC Educational Resources Information Center

Moran, Tom; Rowse, Glenwood

The development of procedures designed to provide quantitative assessments of quality in higher education institutions are reviewed. These procedures employ a systems framework and utilize quantitative data to compare institutions or programs of similar types with one another. Three major elements essential in the development of models focusing on…

INFLUENCE OF EXPOSURE ASSESSMENT METHOD IN AN EPIDEMIOLOGIC STUDY OF TRIHALOMETHANE EXPOSURE AND SPONTANEOUS ABORTION

EPA Science Inventory

Trihalomethanes are common contaminants of chlorinated drinking water. Studies of their health effects have been hampered by exposure misclassification, due in part to limitations inherent in using utility sampling records. We used two exposure assessment methods, one based on ut...

Systematic reviews on neurodevelopmental and neurodegenerative disorders linked to pesticide exposure: Methodological features and impact on risk assessment.

PubMed

Hernández, Antonio F; González-Alzaga, Beatriz; López-Flores, Inmaculada; Lacasaña, Marina

2016-01-01

Epidemiological data are not currently used in the risk assessment of chemical substances in a systematic and consistent manner. However, systematic reviews (SRs) could be useful for risk assessment as they appraise and synthesize the best epidemiological knowledge available. To conduct a comprehensive literature search of SRs pertaining to pesticide exposure and various neurological outcomes, namely neurodevelopmental abnormalities, Parkinson's disease (PD) and Alzheimer's disease (AD), and to assess the potential contribution of SRs to the risk assessment process. Search was conducted in PubMed and Web of Science databases and articles were selected if the following inclusion criteria were met: being a SR, published until April 2015 and without language restrictions. For each neurological outcome, two review authors independently screened the search results for included studies. Data were extracted and summarized in two tables according to 16 criteria. Disagreements were resolved by discussion. The total number of studies identified in the first search was 65, 304 and 108 for neurodevelopment, PD and AD, respectively. From them, 8, 10 and 2 met the defined inclusion criteria for those outcomes, respectively. Overall, results suggest that prenatal exposure to organophosphates is associated with neurodevelopmental disturbances in preschool and school children. In contrast, postnatal exposures failed to show a clear effect across cohort studies. Regarding PD, 6 SRs reported statistically significant combined effect size estimates, with OR/RR ranging between 1.28 and 1.94. As for AD, 2 out of the 8 original articles included in the SRs found significant associations, with OR of 2.39 and 4.35, although the quality of the data was rather low. The critical appraisal of the SRs identified allowed for discussing the implications of SRs for risk assessment, along with the identification of gaps and limitations of current epidemiological studies that hinder their use for

VISUALLY OBSERVED MOLD AND MOLDY ODOR VERSUS QUANTITATIVELY MEASURED MICROBIAL EXPOSURE IN HOMES

EPA Science Inventory

The main study objective was to compare different methods for assessing mold exposure in conjunction with an epidemiologic study on the development of children's asthma. Homes of 184 children were assessed for mold by visual observations and dust sampling at child's age 1 (Year ...

Nanomaterials, and Occupational Health and Safety—A Literature Review About Control Banding and a Semi-Quantitative Method Proposed for Hazard Assessment.

NASA Astrophysics Data System (ADS)

Dimou, Kaotar; Emond, Claude

2017-06-01

In recent decades, the control banding (CB) approach has been recognised as a hazard assessment methodology because of its increased importance in the occupational safety, health and hygiene (OSHH) industry. According to the American Industrial Hygiene Association, this approach originates from the pharmaceutical industry in the United Kingdom. The aim of the CB approach is to protect more than 90% (or approximately 2.7 billion) of the world’s workers who do not have access to OSHH professionals and traditional quantitative risk assessment methods. In other words, CB is a qualitative or semi-quantitative tool designed to prevent occupational accidents by controlling worker exposures to potentially hazardous chemicals in the absence of comprehensive toxicological and exposure data. These criteria correspond very precisely to the development and production of engineered nanomaterials (ENMs). Considering the significant lack of scientific knowledge about work-related health risks because of ENMs, CB is, in general, appropriate for these issues. Currently, CB can be adapted to the specificities of ENMs; hundreds of nanotechnology products containing ENMs are already on the market. In this context, this qualitative or semi-quantitative approach appears to be relevant for characterising and quantifying the degree of physico-chemical and biological reactivities of ENMs, leading towards better control of human health effects and the safe handling of ENMs in workplaces. The need to greater understand the CB approach is important to further manage the risks related to handling hazardous substances, such as ENMs, without established occupational exposure limits. In recent years, this topic has garnered much interest, including discussions in many technical papers. Several CB models have been developed, and many countries have created their own nano-specific CB instruments. The aims of this research were to perform a literature review about CBs, to classify the main

Assessing the prevalence of trauma exposure in epidemiological surveys.

PubMed

Mills, Katherine L; McFarlane, Alexander C; Slade, Tim; Creamer, Mark; Silove, Derrick; Teesson, Maree; Bryant, Richard

2011-05-01

Estimates of the prevalence of exposure to potentially traumatic events (PTEs) in population surveys have increased over time. There is limited empirical evidence on the impact of changes in measurement practices on these estimates. The present study examined the effect of increasing the number of events assessed on the prevalence of exposure longitudinally. Data were ultilized from the 1997 and 2007 Australian National Surveys of Mental Health and Wellbeing. The 1997 survey assessed exposure using 11 items from the Composite International Diagnostic Interview (CIDI), version 2.1. The 2007 survey utilized 29 items from the World Mental Health CIDI. Prevalence rates of exposure to matched events among age-matched samples from both surveys were compared to determine whether differences in the estimates obtained were due to respondents having been asked about an increased number of event types in the latter survey. The effect of increasing the number of event types in the CIDI from 11 to 29 was to increase the overall population prevalence of exposure to PTEs by 18%. The difference between estimates was more pronounced in women than in men. The cross-cohort analyses revealed that these differences were not indicative of an increase in trauma exposure over time; but rather the endorsement of new events that were not listed in the earlier survey. The findings underscore the importance of using comprehensive assessments in the measurement of exposure to PTEs. Previous epidemiological surveys may have underestimated the prevalence of traumatic and other stressful life events, particularly among women.

Exposure Assessment of Chemicals from Packaging Materials

NASA Astrophysics Data System (ADS)

Poças, Maria De Fátima; Hogg, Timothy

A variety of chemicals may enter our food supply, by means of intentional or unintentional addition, at different stages of the food chain. These chemicals include food additives, pesticide residues, environmental contaminants, mycotox-ins, flavoring substances, and micronutrients. Packaging systems and other food-contact materials are also a source of chemicals contaminating food products and beverages. Monitoring exposure to these chemicals has become an integral part of ensuring the safety of the food supply. Within the context of the risk analysis approach and more specifically as an integral part of risk assessment procedures, the exercise known as exposure assessment is crucial in providing data to allow sound judgments concerning risks to human health. The exercise of obtaining this data is part of the process of revealing sources of contamination and assessing the effectiveness of strategies for minimizing the risk from chemical contamination in the food supply (Lambe, 2002).

AN APPROACH TO METHODS DEVELOPMENT FOR HUMAN EXPOSURE ASSESSMENT STUDIES

EPA Science Inventory

Human exposure assessment studies require methods that are rapid, cost-effective and have a high sample through-put. The development of analytical methods for exposure studies should be based on specific information for individual studies. Human exposure studies suggest that di...

In Vitro Exposure Systems and Dosimetry Assessment Tools ...

EPA Pesticide Factsheets

In 2009, the passing of The Family Smoking Prevention and Tobacco Control Act facilitated the establishment of the FDA Center for Tobacco Products (CTP) and gave it regulatory authority over the marketing, manufacture and distribution of tobacco products, including those termed “modified risk”. On 4-6 April 2016, the Institute for In Vitro Sciences, Inc. (IIVS) convened a workshop conference titled “In Vitro Exposure Systems and Dosimetry Assessment Tools for Inhaled Tobacco Products” to bring together stakeholders representing regulatory agencies, academia, and industry to address the research priorities articulated by the FDA CTP. Specific topics were covered to assess the status of current in vitro smoke and aerosol/vapor exposure systems, as well as the various approaches and challenges to quantifying the complex exposures, in in vitro pulmonary models developed for evaluating adverse pulmonary events resulting from tobacco product exposures. The four core topics covered were, 1) Tobacco Smoke And E-Cigarette Aerosols, 2) Air-Liquid Interface-In Vitro Exposure Systems, 3) Dosimetry Approaches For Particles And Vapors; In Vitro Dosimetry Determinations and 4) Exposure Microenvironment/Physiology Of Cells. The two and a half day workshop included presentations from 20 expert speakers, poster sessions, networking discussions, and breakout sessions which identified key findings and provided recommendations to advance these technologies. Here, we will re

Assessing human exposure to power-frequency electric and magnetic fields.

PubMed Central

Kaune, W T

1993-01-01

This paper reviews published literature and current problems relating to the assessment of occupational and residential human exposures to power-frequency electric and magnetic fields. Available occupational exposure data suggest that the class of job titles known as electrical workers may be an effective surrogate for time-weighted-average (TWA) magnetic-field (but not electric-field) exposure. Current research in occupational-exposure assessment is directed to the construction of job-exposure matrices based on electric- and magnetic-field measurements and estimates of worker exposures to chemicals and other factors of interest. Recent work has identified five principal sources of residential magnetic fields: electric power transmission lines, electric power distribution lines, ground currents, home wiring, and home appliances. Existing residential-exposure assessments have used one or more of the following techniques: questionnaires, wiring configuration coding, theoretical field calculations, spot electric- and magnetic-field measurements, fixed-site magnetic-field recordings, personal- exposure measurements, and geomagnetic-field measurements. Available normal-power magnetic-field data for residences differ substantially between studies. It is not known if these differences are due to geographical differences, differences in measurement protocols, or instrumentation differences. Wiring codes and measured magnetic fields (but not electric fields) are associated weakly. Available data suggest, but are far from proving, that spot measurements may be more effective than wire codes as predictors of long-term historical magnetic-field exposure. Two studies find that away-from-home TWA magnetic-field exposures are less variable than at-home exposures. The importance of home appliances as contributors to total residential magnetic-field exposure is not known at this time. It also is not known what characteristics (if any) of residential electric and magnetic fields are

[Research progress and development trend of quantitative assessment techniques for urban thermal environment.

PubMed

Sun, Tie Gang; Xiao, Rong Bo; Cai, Yun Nan; Wang, Yao Wu; Wu, Chang Guang

2016-08-01

Quantitative assessment of urban thermal environment has become a focus for urban climate and environmental science since the concept of urban heat island has been proposed. With the continual development of space information and computer simulation technology, substantial progresses have been made on quantitative assessment techniques and methods of urban thermal environment. The quantitative assessment techniques have been developed to dynamics simulation and forecast of thermal environment at various scales based on statistical analysis of thermal environment on urban-scale using the historical data of weather stations. This study reviewed the development progress of ground meteorological observation, thermal infrared remote sensing and numerical simulation. Moreover, the potential advantages and disadvantages, applicability and the development trends of these techniques were also summarized, aiming to add fundamental knowledge of understanding the urban thermal environment assessment and optimization.

Nano-metal oxides: Exposure and engineering control assessment.

PubMed

Garcia, Alberto; Eastlake, Adrienne; Topmiller, Jennifer L; Sparks, Christopher; Martinez, Kenneth; Geraci, Charles L

2017-09-01

In January 2007, the National Institute for Occupational Safety and Health (NIOSH) conducted a field study to evaluate process specific emissions during the production of ENMs. This study was performed using the nanoparticle emission assessment technique (NEAT). During this study, it was determined that ENMs were released during production and cleaning of the process reactor. Airborne concentrations of silver, nickel, and iron were found both in the employee's personal breathing zone and area samples during reactor cleaning. At the completion of this initial survey, it was suggested that a flanged attachment be added to the local exhaust ventilation system.  NIOSH re-evaluated the facility in December 2011 to assess worker exposures following an increase in production rates. This study included a fully comprehensive emissions, exposure, and engineering control evaluation of the entire process. This study made use of the nanoparticle exposure assessment technique (NEAT 2.0). Data obtained from filter-based samples and direct reading instruments indicate that reactor cleanout increased the overall particle concentration in the immediate area. However, it does not appear that these concentrations affect areas outside of the production floor. As the distance between the reactor and the sample location increased, the observed particle number concentration decreased, creating a concentration gradient with respect to the reactor. The results of this study confirm that the flanged attachment on the local exhaust ventilation system served to decrease exposure potential.  Given the available toxicological data of the metals evaluated, caution is warranted. One should always keep in mind that occupational exposure levels were not developed specifically for nanoscale particles. With data suggesting that certain nanoparticles may be more toxic than the larger counterparts of the same material; employers should attempt to control emissions of these particles at the source

Fertility preservation: a pilot study to assess previsit patient knowledge quantitatively.

PubMed

Balthazar, Ursula; Fritz, Marc A; Mersereau, Jennifer E

2011-05-01

To provide a quantitative assessment of patient knowledge about fertility and fertility preservation treatment options before the initial fertility preservation consultation at a university-based fertility preservation center. Prospective pilot survey containing 13 items assessing patient knowledge about fertility preservation, including the available treatment options and their requirements, success rates, and associated risks. University-based IVF center. Women aged 18 to 41 years with illnesses requiring treatments posing a serious threat to future fertility who were referred for fertility preservation consultation between April 2009 and June 2010. None. Knowledge score. Forty-one eligible patients were identified, and all completed surveys before their consultation. A knowledge score was generated for each patient with 1 point awarded for each correct answer. Overall, patients had poor previsit fertility preservation knowledge (mean score 5.9±2.7). Higher knowledge scores were correlated with personal experience with infertility and previous exposure to fertility preservation treatment information. There was no correlation between knowledge score and age, relationship status, pregnancy history, education, or income. Patients seen for fertility preservation consultation at our university-based center generally tend to be in their early 30s, white, well educated, and married. Previsit knowledge about fertility preservation treatment options was poor and did not correlate with age, education, and relationship status. Copyright © 2011 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Assessing the Quantitative Relationships between Preschool Children's Exposures to Bisphenol A by Route and Urinary Biomonitoring

EPA Science Inventory

Limited published information exists on young children’s exposures to bisphenol A (BPA) in the United States using urinary biomonitoring. In a previous project, we quantified the aggregate exposures of 257 preschool children to BPA in environmental and personal media over 48-h pe...

Update of an occupational asthma-specific job exposure matrix to assess exposure to 30 specific agents.

PubMed

Le Moual, Nicole; Zock, Jan-Paul; Dumas, Orianne; Lytras, Theodore; Andersson, Eva; Lillienberg, Linnéa; Schlünssen, Vivi; Benke, Geza; Kromhout, Hans

2018-07-01

We aimed to update an asthmagen job exposure matrix (JEM) developed in the late 1990s. Main reasons were: the number of suspected and recognised asthmagens has since tripled; understanding of the aetiological role of irritants in asthma and methodological insights in application of JEMs have emerged in the period. For each agent of the new occupational asthma-specific JEM (OAsJEM), a working group of three experts out of eight evaluated exposure for each International Standard Classification of Occupations, 1988 (ISCO-88) job code into three categories: 'high' (high probability of exposure and moderate-to-high intensity), 'medium' (low-to-moderate probability or low intensity) and 'unexposed'. Within a working group, experts evaluated exposures independently from each other. If expert assessments were inconsistent the final decision was taken by consensus. Specificity was favoured over sensitivity, that is, jobs were classified with high exposure only if the probability of exposure was high and the intensity moderate-to-high. In the final review, all experts checked assigned exposures and proposed/improved recommendations for expert re-evaluation after default application of the JEM. The OAsJEM covers exposures to 30 sensitisers/irritants, including 12 newly recognised, classified into seven broad groups. Initial agreement between the three experts was mostly fair to moderate (κ values 0.2-0.5). Out of 506 ISCO-88 codes, the majority was classified as unexposed (from 82.6% (organic solvents) to 99.8% (persulfates)) and a minority as 'high-exposed' (0.2% (persulfates) to 2.6% (organic solvents)). The OAsJEM developed to improve occupational exposure assessment may improve evaluations of associations with asthma in epidemiological studies and contribute to assessment of the burden of work-related asthma. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless

Population-Based Assessment of Exposure to Risk Behaviors in Motion Pictures

PubMed Central

Sargent, James D.; Worth, Keilah A.; Beach, Michael; Gerrard, Meg; Heatherton, Todd F.

2008-01-01

The aim of most population-based studies of media is to relate a specific exposure to an outcome of interest. A research program has been developed that evaluates exposure to different components of movies in an attempt of assess the association of such exposure with the adoption of substance use during adolescence. To assess exposure to movie substance use, one must measure both viewing time and content. In developing the exposure measure, the study team was interested in circumventing a common problem in exposure measurement, where measures often conflate exposure to media with attention to media. Our aim in this paper is to present a validated measure of exposure to entertainment media, the Beach method, which combines recognition of a movie title with content analysis of the movie for substance use, to generate population based measures of exposure to substance use in this form of entertainment. PMID:19122801

Population-Based Assessment of Exposure to Risk Behaviors in Motion Pictures.

PubMed

Sargent, James D; Worth, Keilah A; Beach, Michael; Gerrard, Meg; Heatherton, Todd F

2008-01-01

The aim of most population-based studies of media is to relate a specific exposure to an outcome of interest. A research program has been developed that evaluates exposure to different components of movies in an attempt of assess the association of such exposure with the adoption of substance use during adolescence. To assess exposure to movie substance use, one must measure both viewing time and content. In developing the exposure measure, the study team was interested in circumventing a common problem in exposure measurement, where measures often conflate exposure to media with attention to media. Our aim in this paper is to present a validated measure of exposure to entertainment media, the Beach method, which combines recognition of a movie title with content analysis of the movie for substance use, to generate population based measures of exposure to substance use in this form of entertainment.

Relationship between Plaque Echo, Thickness and Neovascularization Assessed by Quantitative and Semi-quantitative Contrast-Enhanced Ultrasonography in Different Stenosis Groups.

PubMed

Song, Yan; Feng, Jun; Dang, Ying; Zhao, Chao; Zheng, Jie; Ruan, Litao

2017-12-01

The aim of this study was to determine the relationship between plaque echo, thickness and neovascularization in different stenosis groups using quantitative and semi-quantitative contrast-enhanced ultrasound (CEUS) in patients with carotid atherosclerosis plaque. A total of 224 plaques were divided into mild stenosis (<50%; 135 plaques, 60.27%), moderate stenosis (50%-69%; 39 plaques, 17.41%) and severe stenosis (70%-99%; 50 plaques, 22.32%) groups. Quantitative and semi-quantitative methods were used to assess plaque neovascularization and determine the relationship between plaque echo, thickness and neovascularization. Correlation analysis revealed no relationship of neovascularization with plaque echo in the groups using either quantitative or semi-quantitative methods. Furthermore, there was no correlation of neovascularization with plaque thickness using the semi-quantitative method. The ratio of areas under the curve (RAUC) was negatively correlated with plaque thickness (r = -0.317, p = 0.001) in the mild stenosis group. With the quartile method, plaque thickness of the mild stenosis group was divided into four groups, with significant differences between the 1.5-2.2 mm and ≥3.5 mm groups (p = 0.002), 2.3-2.8 mm and ≥3.5 mm groups (p <0.001) and 2.9-3.4 mm and ≥3.5 mm groups (p <0.001). Both semi-quantitative and quantitative CEUS methods characterizing neovascularization of plaque are equivalent with respect to assessing relationships between neovascularization, echogenicity and thickness. However, the quantitative method could fail for plaque <3.5 mm because of motion artifacts. Copyright © 2017 World Federation for Ultrasound in Medicine and Biology. Published by Elsevier Inc. All rights reserved.

Occupational exposure decisions: can limited data interpretation training help improve accuracy?

PubMed

Logan, Perry; Ramachandran, Gurumurthy; Mulhausen, John; Hewett, Paul

2009-06-01

Accurate exposure assessments are critical for ensuring that potentially hazardous exposures are properly identified and controlled. The availability and accuracy of exposure assessments can determine whether resources are appropriately allocated to engineering and administrative controls, medical surveillance, personal protective equipment and other programs designed to protect workers. A desktop study was performed using videos, task information and sampling data to evaluate the accuracy and potential bias of participants' exposure judgments. Desktop exposure judgments were obtained from occupational hygienists for material handling jobs with small air sampling data sets (0-8 samples) and without the aid of computers. In addition, data interpretation tests (DITs) were administered to participants where they were asked to estimate the 95th percentile of an underlying log-normal exposure distribution from small data sets. Participants were presented with an exposure data interpretation or rule of thumb training which included a simple set of rules for estimating 95th percentiles for small data sets from a log-normal population. DIT was given to each participant before and after the rule of thumb training. Results of each DIT and qualitative and quantitative exposure judgments were compared with a reference judgment obtained through a Bayesian probabilistic analysis of the sampling data to investigate overall judgment accuracy and bias. There were a total of 4386 participant-task-chemical judgments for all data collections: 552 qualitative judgments made without sampling data and 3834 quantitative judgments with sampling data. The DITs and quantitative judgments were significantly better than random chance and much improved by the rule of thumb training. In addition, the rule of thumb training reduced the amount of bias in the DITs and quantitative judgments. The mean DIT % correct scores increased from 47 to 64% after the rule of thumb training (P < 0.001). The

The Use of Quantitative SPECT/CT Imaging to Assess Residual Limb Health

DTIC Science & Technology

2016-10-01

AWARD NUMBER: W81XWH-15-1-0669 TITLE: The Use of Quantitative SPECT/CT Imaging to Assess Residual Limb Health PRINCIPAL INVESTIGATOR...3. DATES COVERED 30 Sep 2015 - 29 Sep 2016 4. TITLE AND SUBTITLE The Use of Quantitative SPECT/CT Imaging to Assess Residual Limb Health 5a...amputation and subsequently evaluate the utility of non-invasive imaging for evaluating the impact of next-generation socket technologies on the health of

Human health exposure assessment for Rocky Mountain Arsenal. Volume 8. Response to comments on the draft exposure assessment version 4. 1. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The objectives of the Human Health Exposure Assessment include: (1) estimate the type and magnitude of exposures to contaminants; (2) Identify contaminants of concern; (3) Identify sites for remedial action; (4) Recommend sites for the no action remedial alternative; and (5) Provide a basis for detailed characterization of the risk associated with all sites. This document consists of the following: An executive summary. Vol I - Land use and exposed population evaluations. Vol. II III - Toxicity assessment (includes army and shell toxicity profiles). Vol. IV - PPLV Methodology. Vol. V - PPLV Calculations. Vol. VI - Study area exposuremore » analysis A introduction, B Western study ares, C Southern study area, D northern Central study area, E Central study area, F Eastern study area, G South plants study area, and H North plants study area. Vol. VII - Summary exposure assessment.« less

Quantitative weight of evidence assessment of higher tier studies on the toxicity and risks of neonicotinoids in honeybees. 4. Thiamethoxam.

PubMed

Stephenson, Gladys L; Solomon, Keith R

2017-01-01

A quantitative weight of evidence (QWoE) methodology was used to assess several higher-tier studies on the effects of thiamethoxam (TMX) on honeybees. Assessment endpoints were population size and viability of commercially managed honeybee colonies and quantity of hive products. A higher-tier field toxicology study indicated a no-observed-adverse effect concentration (NOAEC) of 29.5 µg TMX/kg syrup, equivalent to an oral no-observed-adverse-effect-dose (NOAED) of 8.6 ng/bee/day for all responses measured. For exposures via deposition of dust, a conservative no-observed-adverse-effect-rate at the level of the colony was 0.1 g TMX/ha. There was minimal risk to honeybees from exposure to TMX via nectar and pollen from its use as a seed-treatment. For exposures via dust and dust/seed applications, there were no concentrations above the risk values for TMX in nectar and pollen. Although some risks were identified for potential exposures via guttation fluid, this route of exposure is incomplete; no apparent adverse effects were observed in field studies. For exposures via dust/seed and dust/foliar applications, few adverse effects were observed. Considering all lines of evidence, the quality of the studies included in this analysis was variable. However, the results of the studies were consistent and point to the same conclusion. The overall weight of evidence based on many studies indicates that TMX has no adverse effects on viability or survival of the colony. Thus, the overall conclusion is that the treatment of seeds with thiamethoxam, as currently used in good agricultural practices, does not present a significant risk to honeybees at the level of the colony.

IWGT report on quantitative approaches to genotoxicity risk assessment I. Methods and metrics for defining exposure-response relationships and points of departure (PoDs)

EPA Science Inventory

This report summarizes the discussion, conclusions, and points of consensus of the IWGT Working Group on Quantitative Approaches to Genetic Toxicology Risk Assessment (QWG) based on a meeting in Foz do Iguaçu, Brazil October 31–November 2, 2013. Topics addressed incl...

Performance of GPS-devices for environmental exposure assessment.

PubMed

Beekhuizen, Johan; Kromhout, Hans; Huss, Anke; Vermeulen, Roel

2013-01-01

Integration of individual time-location patterns with spatially resolved exposure maps enables a more accurate estimation of personal exposures to environmental pollutants than using estimates at fixed locations. Current global positioning system (GPS) devices can be used to track an individual's location. However, information on GPS-performance in environmental exposure assessment is largely missing. We therefore performed two studies. First, a commute-study, where the commute of 12 individuals was tracked twice, testing GPS-performance for five transport modes and two wearing modes. Second, an urban-tracking study, where one individual was tracked repeatedly through different areas, focused on the effect of building obstruction on GPS-performance. The median error from the true path for walking was 3.7 m, biking 2.9 m, train 4.8 m, bus 4.9 m, and car 3.3 m. Errors were larger in a high-rise commercial area (median error=7.1 m) compared with a low-rise residential area (median error=2.2 m). Thus, GPS-performance largely depends on the transport mode and urban built-up. Although ~85% of all errors were <10 m, almost 1% of the errors were >50 m. Modern GPS-devices are useful tools for environmental exposure assessment, but large GPS-errors might affect estimates of exposures with high spatial variability.

Addressing bystander exposure to agricultural pesticides in life cycle impact assessment.

PubMed

Ryberg, Morten Walbech; Rosenbaum, Ralph K; Mosqueron, Luc; Fantke, Peter

2018-04-01

Residents living near agricultural fields may be exposed to pesticides drifting from the fields after application to different field crops. To address this currently missing exposure pathway in life cycle assessment (LCA), we developed a modeling framework for quantifying exposure of bystanders to pesticide spray drift from agricultural fields. Our framework consists of three parts addressing: (1) loss of pesticides from an agricultural field via spray drift; (2) environmental fate of pesticide in air outside of the treated field; and (3) exposure of bystanders to pesticides via inhalation. A comparison with measured data in a case study on pesticides applied to potato fields shows that our model gives good predictions of pesticide air concentrations. We compared our bystander exposure estimates with pathways currently included in LCA, namely aggregated inhalation and ingestion exposure mediated via the environment for the general population, and general population exposure via ingestion of pesticide residues in consumed food crops. The results show that exposure of bystanders is limited relative to total population exposure from ingestion of pesticide residues in crops, but that the exposure magnitude of individual bystanders can be substantially larger than the exposure of populations not living in the proximity to agricultural fields. Our framework for assessing bystander exposure to pesticide applications closes a relevant gap in the exposure assessment included in LCA for agricultural pesticides. This inclusion aids decision-making based on LCA as previously restricted knowledge about exposure of bystanders can now be taken into account. Copyright © 2018 Elsevier Ltd. All rights reserved.

Exposure and inhalation risk assessment in an aluminium cast-house.

PubMed

Godderis, L; Vanderheyden, W; Van Geel, J; Moens, G; Masschelein, R; Veulemans, H

2005-12-01

To date the exposure, absorption and respiratory health effects of cast-house workers have not been described since most studies performed in the aluminium industry are focused on exposure and health effects of potroom personnel. In the present study, we assessed the external exposure and the absorbed dose of metals in personnel from the aluminium cast house. This was combined with an evaluation of respiratory complaints and the lung function of the personnel. 30 workers from an aluminium casting plant participated and 17 individuals of the packaging and distribution departments were selected as controls. The exposure was assessed by the quantification of total inhalable fume with metal fraction and by the determination of urinary aluminium, chromium, beryllium, manganese and lead concentration. Carbon monoxide (CO), carbon dioxide (CO2), aldehydes and polyaromatic hydrocarbons and man-made mineral fibres concentration were assessed as well. In order to evaluate their respiratory status each participant filled out a questionnaire and their lung function was tested by forced spirometry. Total inhalable fume exposure was maximum 4.37 mg m(-3). Exposure to the combustion gases, man-made mineral fibres and metal fume was well below the exposure limits. Beryllium could not be detected in the urine. The values of aluminium, manganese and lead in the urine were all under the respective reference value. One individual had a urinary chromium excretion above the ACGIH defined biological exposure index (BEI) of 30 microg g(-1) creatinine. There was no significant difference in any of the categories of the respiratory questionnaire and in the results of the spirometry between cast house personnel and referents (Chi-square, all p > 0.05). Exposure in cast houses seem to be acceptable under these conditions. However, peak exposure to fumes cannot be excluded and the potential risk of chromium and beryllium exposure due to the recycling of aluminium requires further attention.

Modelling ecological and human exposure to POPs in Venice lagoon - Part II: Quantitative uncertainty and sensitivity analysis in coupled exposure models.

PubMed

Radomyski, Artur; Giubilato, Elisa; Ciffroy, Philippe; Critto, Andrea; Brochot, Céline; Marcomini, Antonio

2016-11-01

The study is focused on applying uncertainty and sensitivity analysis to support the application and evaluation of large exposure models where a significant number of parameters and complex exposure scenarios might be involved. The recently developed MERLIN-Expo exposure modelling tool was applied to probabilistically assess the ecological and human exposure to PCB 126 and 2,3,7,8-TCDD in the Venice lagoon (Italy). The 'Phytoplankton', 'Aquatic Invertebrate', 'Fish', 'Human intake' and PBPK models available in MERLIN-Expo library were integrated to create a specific food web to dynamically simulate bioaccumulation in various aquatic species and in the human body over individual lifetimes from 1932 until 1998. MERLIN-Expo is a high tier exposure modelling tool allowing propagation of uncertainty on the model predictions through Monte Carlo simulation. Uncertainty in model output can be further apportioned between parameters by applying built-in sensitivity analysis tools. In this study, uncertainty has been extensively addressed in the distribution functions to describe the data input and the effect on model results by applying sensitivity analysis techniques (screening Morris method, regression analysis, and variance-based method EFAST). In the exposure scenario developed for the Lagoon of Venice, the concentrations of 2,3,7,8-TCDD and PCB 126 in human blood turned out to be mainly influenced by a combination of parameters (half-lives of the chemicals, body weight variability, lipid fraction, food assimilation efficiency), physiological processes (uptake/elimination rates), environmental exposure concentrations (sediment, water, food) and eating behaviours (amount of food eaten). In conclusion, this case study demonstrated feasibility of MERLIN-Expo to be successfully employed in integrated, high tier exposure assessment. Copyright © 2016 Elsevier B.V. All rights reserved.

A qualitative and quantitative assessment for a bone marrow harvest simulator.

PubMed

Machado, Liliane S; Moraes, Ronei M

2009-01-01

Several approaches to perform assessment in training simulators based on virtual reality have been proposed. There are two kinds of assessment methods: offline and online. The main requirements related to online training assessment methodologies applied to virtual reality systems are the low computational complexity and the high accuracy. In the literature it can be found several approaches for general cases which can satisfy such requirements. An inconvenient about those approaches is related to an unsatisfactory solution for specific cases, as in some medical procedures, where there are quantitative and qualitative information available to perform the assessment. In this paper, we present an approach to online training assessment based on a Modified Naive Bayes which can manipulate qualitative and quantitative variables simultaneously. A special medical case was simulated in a bone marrow harvest simulator. The results obtained were satisfactory and evidenced the applicability of the method.

Exposure assessment of aluminum arc welding radiation.

PubMed

Peng, Chiung-yu; Lan, Cheng-hang; Juang, Yow-jer; Tsao, Ta-ho; Dai, Yu-tung; Liu, Hung-hsin; Chen, Chiou-jong

2007-10-01

The purpose of this study is to evaluate the non-ionizing radiation (NIR) exposure, especially optical radiation levels, and potential health hazard from aluminum arc welding processes based on the American Conference of Governmental Industrial Hygienists (ACGIH) method. The irradiance from the optical radiation emissions can be calculated with various biological effective parameters [i.e., S(lambda), B(lambda), R(lambda)] for NIR hazard assessments. The aluminum arc welding processing scatters bright light with NIR emission including ultraviolet radiation (UVR), visible, and infrared spectra. The UVR effective irradiance (Eeff) has a mean value of 1,100 microW cm at 100 cm distance from the arc spot. The maximum allowance time (tmax) is 2.79 s according to the ACGIH guideline. Blue-light hazard effective irradiance (EBlue) has a mean value of 1840 microW cm (300-700 nm) at 100 cm with a tmax of 5.45 s exposure allowance. Retinal thermal hazard effective calculation shows mean values of 320 mW cm(-2) sr(-1) and 25.4 mW (cm-2) (380-875 nm) for LRetina (spectral radiance) and ERetina (spectral irradiance), respectively. From this study, the NIR measurement from welding optical radiation emissions has been established to evaluate separate types of hazards to the eye and skin simultaneously. The NIR exposure assessment can be applied to other optical emissions from industrial sources. The data from welding assessment strongly suggest employees involved in aluminum welding processing must be fitted with appropriate personal protection devices such as masks and gloves to prevent serious injuries of the skin and eyes upon intense optical exposure.

Is multidetector CT-based bone mineral density and quantitative bone microstructure assessment at the spine still feasible using ultra-low tube current and sparse sampling?

PubMed

Mei, Kai; Kopp, Felix K; Bippus, Rolf; Köhler, Thomas; Schwaiger, Benedikt J; Gersing, Alexandra S; Fehringer, Andreas; Sauter, Andreas; Münzel, Daniela; Pfeiffer, Franz; Rummeny, Ernst J; Kirschke, Jan S; Noël, Peter B; Baum, Thomas

2017-12-01

Osteoporosis diagnosis using multidetector CT (MDCT) is limited to relatively high radiation exposure. We investigated the effect of simulated ultra-low-dose protocols on in-vivo bone mineral density (BMD) and quantitative trabecular bone assessment. Institutional review board approval was obtained. Twelve subjects with osteoporotic vertebral fractures and 12 age- and gender-matched controls undergoing routine thoracic and abdominal MDCT were included (average effective dose: 10 mSv). Ultra-low radiation examinations were achieved by simulating lower tube currents and sparse samplings at 50%, 25% and 10% of the original dose. BMD and trabecular bone parameters were extracted in T10-L5. Except for BMD measurements in sparse sampling data, absolute values of all parameters derived from ultra-low-dose data were significantly different from those derived from original dose images (p<0.05). BMD, apparent bone fraction and trabecular thickness were still consistently lower in subjects with than in those without fractures (p<0.05). In ultra-low-dose scans, BMD and microstructure parameters were able to differentiate subjects with and without vertebral fractures, suggesting osteoporosis diagnosis is feasible. However, absolute values differed from original values. BMD from sparse sampling appeared to be more robust. This dose-dependency of parameters should be considered for future clinical use. • BMD and quantitative bone parameters are assessable in ultra-low-dose in vivo MDCT scans. • Bone mineral density does not change significantly when sparse sampling is applied. • Quantitative trabecular bone microstructure measurements are sensitive to dose reduction. • Osteoporosis subjects could be differentiated even at 10% of original dose. • Radiation exposure should be considered when comparing quantitative bone parameters.

Exposure factors for cleaning, automotive care, and surface protection products for exposure assessments.

PubMed

Park, Ji Young; Lim, Miyoung; Yang, Wonho; Lee, Kiyoung

2017-01-01

Accurately measuring the usage patterns of consumer products (CPs) is important to conduct realistic exposure assessments. We determined the exposure factors for 18 consumer products: household bleach, mold stain remover, all-purpose cleaner, washing machine cleaner, air conditioner cleaner, glass cleaner, drain cleaner, adhesive remover, liquid snow chain, tire shine spray, wheel cleaner, rain repellent, car wax spray, leather polish, furniture polish, anti-fog product, fabric waterproofing spray, and rust inhibitor. Field survey staff visited homes and collected product use information via face-to-face interviews. In total, 10,000 participants (5010 men and 4990 women) aged 15 years and older completed the questionnaire. Household bleach had the highest use rate of 47.4% and use rates for the other products ranged from 0.8 to 21.7%. The use rates of many CPs differed by age group and gender. Many household cleaning products were used regularly, but some products, such as air conditioner cleaner and liquid snow chain, were used in specific seasons or for specific purposes; therefore, they were used less frequently compared to cleaning products. These exposure factor data will be useful as input data for exposure and risk assessments and setting safety guidelines. Copyright © 2016 Elsevier Ltd. All rights reserved.

Population Based Exposure Assessment of Bioaccessible Arsenic in Carrots

EPA Science Inventory

The two predominant arsenic exposure routes are food and water. Estimating the risk from dietary exposures is complicated, owing to the chemical form dependent toxicity of arsenic and the diversity of arsenicals present in dietary matrices. Two aspects of assessing dietary expo...

Exposure assessment in different occupational groups at a hospital using Quick Exposure Check (QEC) - a pilot study.

PubMed

Ericsson, Pernilla; Björklund, Martin; Wahlström, Jens

2012-01-01

In order to test the feasibility and sensitivity of the ergonomic exposure assessment tool Quick Exposure Check (QEC), a pilot-study was conducted. The aim was to test QEC in different occupational groups to compare the exposure in the most common work task with the exposure in the work task perceived as the most strenuous for the neck/shoulder region, and to test intra-observer reliability. One experienced ergonomist observed 23 workers. The mean observation time was 45 minutes, waiting time and time for complementary questions included. The exposure scores varied between the different occupational groups as well as between workers within the occupational groups. Eighteen workers rated their most common work task as also being the most strenuous for the neck/shoulder region. For the remaining five workers, the mean exposure score were higher both for the neck and shoulder/arm in the most common work task. Intra-observer reliability shows agreement in 86% of the exposure interactions in the neck and in 71% in the shoulder/arm. QEC seems to fulfill the expectations of being a quick, sensible and practical exposure assessment tool that covers physical risk factors in the neck, upper extremities and low back.

A Chemical Activity Approach to Exposure and Risk Assessment of Chemicals

EPA Science Inventory

To support the goals articulated in the vision for exposure and risk assessment in the twenty-first century, we highlight the application of a thermodynamic chemical activity approach for the exposure and risk assessment of chemicals in the environment. The present article descri...

Reanalysis of the DEMS Nested Case-Control Study of Lung Cancer and Diesel Exhaust: Suitability for Quantitative Risk Assessment

PubMed Central

Crump, Kenny S; Van Landingham, Cynthia; Moolgavkar, Suresh H; McClellan, Roger

2015-01-01

The International Agency for Research on Cancer (IARC) in 2012 upgraded its hazard characterization of diesel engine exhaust (DEE) to “carcinogenic to humans.” The Diesel Exhaust in Miners Study (DEMS) cohort and nested case-control studies of lung cancer mortality in eight U.S. nonmetal mines were influential in IARC’s determination. We conducted a reanalysis of the DEMS case-control data to evaluate its suitability for quantitative risk assessment (QRA). Our reanalysis used conditional logistic regression and adjusted for cigarette smoking in a manner similar to the original DEMS analysis. However, we included additional estimates of DEE exposure and adjustment for radon exposure. In addition to applying three DEE exposure estimates developed by DEMS, we applied six alternative estimates. Without adjusting for radon, our results were similar to those in the original DEMS analysis: all but one of the nine DEE exposure estimates showed evidence of an association between DEE exposure and lung cancer mortality, with trend slopes differing only by about a factor of two. When exposure to radon was adjusted, the evidence for a DEE effect was greatly diminished, but was still present in some analyses that utilized the three original DEMS DEE exposure estimates. A DEE effect was not observed when the six alternative DEE exposure estimates were utilized and radon was adjusted. No consistent evidence of a DEE effect was found among miners who worked only underground. This article highlights some issues that should be addressed in any use of the DEMS data in developing a QRA for DEE. PMID:25857246

Exposure Assessment at 30 000 Feet: Challenges and Future Directions

PubMed Central

Grajewski, Barbara; Pinkerton, Lynne E.

2015-01-01

Few studies of cancer mortality and incidence among flight crew have included a detailed assessment of both occupational exposures and lifestyle factors that may influence the risk of cancer. In this issue, Kojo et al. (Risk factors for skin cancer among Finnish airline cabin crew. Ann. Occup. Hyg 2013; 57: 695–704) evaluated the relative contributions of ultraviolet and cosmic radiation to the incidence of skin cancer in Finnish flight attendants. This is a useful contribution, yet the reason flight crew members have an increased risk of skin cancer compared with the general population remains unclear. Good policy decisions for flight crew will depend on continued and emerging effective collaborations to increase study power and improve exposure assessment in future flight crew health studies. Improving the assessment of occupational exposures and non-occupational factors will cost additional time and effort, which are well spent if the role of exposures can be clarified in larger studies. PMID:23818455

Repeatability Assessment by ISO 11843-7 in Quantitative HPLC for Herbal Medicines.

PubMed

Chen, Liangmian; Kotani, Akira; Hakamata, Hideki; Tsutsumi, Risa; Hayashi, Yuzuru; Wang, Zhimin; Kusu, Fumiyo

2015-01-01

We have proposed an assessment methods to estimate the measurement relative standard deviation (RSD) of chromatographic peaks in quantitative HPLC for herbal medicines by the methodology of ISO 11843 Part 7 (ISO 11843-7:2012), which provides detection limits stochastically. In quantitative HPLC with UV detection (HPLC-UV) of Scutellaria Radix for the determination of baicalin, the measurement RSD of baicalin by ISO 11843-7:2012 stochastically was within a 95% confidence interval of the statistically obtained RSD by repetitive measurements (n = 6). Thus, our findings show that it is applicable for estimating of the repeatability of HPLC-UV for determining baicalin without repeated measurements. In addition, the allowable limit of the "System repeatability" in "Liquid Chromatography" regulated in a pharmacopoeia can be obtained by the present assessment method. Moreover, the present assessment method was also successfully applied to estimate the measurement RSDs of quantitative three-channel liquid chromatography with electrochemical detection (LC-3ECD) of Chrysanthemi Flos for determining caffeoylquinic acids and flavonoids. By the present repeatability assessment method, reliable measurement RSD was obtained stochastically, and the experimental time was remarkably reduced.

Review of research on residential mobility during pregnancy: consequences for assessment of prenatal environmental exposures

PubMed Central

Bell, Michelle L.; Belanger, Kathleen

2012-01-01

Studies on environmental exposures during pregnancy often have limited residential history (e.g., at delivery), potentially introducing exposure misclassification. We reviewed studies reporting residential mobility during pregnancy to summarize current evidence and discuss research implications. A meaningful quantitative combination of results (e.g., meta-analysis), was infeasible owing to variation in study designs. Fourteen studies were identified, of which half were from the US. Most were case-control studies examining birth defects. Residential history was typically assessed after delivery. Overall mobility rates were 9–32% and highest in the second trimester. Mobility generally declined with age, parity, and socioeconomic status, although not consistently. Married mothers moved less frequently. Findings were dissimilar by race, smoking, or alcohol use. On the basis of the few studies reporting distance moved, most distances were short (median often <10 km). Results indicate potential misclassification for environmental exposures estimated with incomplete residential information. This misclassification could be associated with potential confounders, such as socioeconomics, thereby affecting risk estimates. As most moves were short distances, exposures that are homogenous within a community may be well estimated with limited residential data. Future research should consider the implications of residential mobility during pregnancy in relation to the exposure’s spatial heterogeneity and factors associated with the likelihood of moving and distance moved. PMID:22617723

Health effects of gasoline exposure. I. Exposure assessment for U.S. distribution workers.

PubMed Central

Smith, T J; Hammond, S K; Wong, O

1993-01-01

Personal exposures were estimated for a large cohort of workers in the U.S. domestic system for distributing gasoline by trucks and marine vessels. This assessment included development of a rationale and methodology for extrapolating vapor exposures prior to the availability of measurement data, analysis of existing measurement data to estimate task and job exposures during 1975-1985, and extrapolation of truck and marine job exposures before 1975. A worker's vapor exposure was extrapolated from three sets of factors: the tasks in his or her job associated with vapor sources, the characteristics of vapor sources (equipment and other facilities) at the work site, and the composition of petroleum products producing vapors. Historical data were collected on the tasks in job definitions, on work-site facilities, and on product composition. These data were used in a model to estimate the overall time-weighted-average vapor exposure for jobs based on estimates of task exposures and their duration. Task exposures were highest during tank filling in trucks and marine vessels. Measured average annual, full-shift exposures during 1975-1985 ranged from 9 to 14 ppm of total hydrocarbon vapor for truck drivers and 2 to 35 ppm for marine workers on inland waterways. Extrapolated past average exposures in truck operations were highest for truck drivers before 1965 (range 140-220 ppm). Other jobs in truck operations resulted in much lower exposures. Because there were few changes in marine operations before 1979, exposures were assumed to be the same as those measured during 1975-1985. Well-defined exposure gradients were found across jobs within time periods, which were suitable for epidemiologic analyses. PMID:8020436

Skin exposure: Assessing the hazard in the workplace

NASA Technical Reports Server (NTRS)

Cummins, Kevin

1994-01-01

An outline of the Occupational Safety and Health Agency's concerns of skin exposure to hazardous chemicals is presented, followed by the corresponding slide narrations. Specifically, dermatitis and skin absorption as compared to lung absorption are addressed. Lung versus skin exposure is examined for glycol ethers and acrylamide. Examples of skin exposure include PBC's in transformers, toluene and xylene from autobody work, polynuclear aromatics (PNA's) among Coke oven workers, toluene diisocyanate (TDI), and occupational chemical exposures in an academic medical center. Permeation through gloves in the semiconductor industry is addressed as evidence for the need to assess the effectiveness of PPE (Personal Protective Equipment). This leads to the revisions of the PPE standard and the Safety and Health Program standard.

Personal exposure assessment to particulate metals using a paper-based analytical device

NASA Astrophysics Data System (ADS)

Cate, David; Volckens, John; Henry, Charles

2013-03-01

The development of a paper-based analytical device (PAD) for assessing personal exposure to particulate metals will be presented. Human exposure to metal aerosols, such as those that occur in the mining, construction, and manufacturing industries, has a significant impact on the health of our workforce, costing an estimated $10B in the U.S and causing approximately 425,000 premature deaths world-wide each year. Occupational exposure to particulate metals affects millions of individuals in manufacturing, construction (welding, cutting, blasting), and transportation (combustion, utility maintenance, and repair services) industries. Despite these effects, individual workers are rarely assessed for their exposure to particulate metals, due mainly to the high cost and effort associated with personal exposure measurement. Current exposure assessment methods for particulate metals call for an 8-hour filter sample, after which time, the filter sample is transported to a laboratory and analyzed by inductively-coupled plasma (ICP). The time from sample collection to reporting is typically weeks and costs several hundred dollars per sample. To exacerbate the issue, method detection limits suffer because of sample dilution during digestion. The lack of sensitivity hampers task-based exposure assessment, for which sampling times may be tens of minutes. To address these problems, and as a first step towards using microfluidics for personal exposure assessment, we have developed PADs for measurement of Pb, Cd, Cr, Fe, Ni, and Cu in aerosolized particulate matter.

NecroQuant: quantitative assessment of radiological necrosis

NASA Astrophysics Data System (ADS)

Hwang, Darryl H.; Mohamed, Passant; Varghese, Bino A.; Cen, Steven Y.; Duddalwar, Vinay

2017-11-01

Clinicians can now objectively quantify tumor necrosis by Hounsfield units and enhancement characteristics from multiphase contrast enhanced CT imaging. NecroQuant has been designed to work as part of a radiomics pipelines. The software is a departure from the conventional qualitative assessment of tumor necrosis, as it provides the user (radiologists and researchers) a simple interface to precisely and interactively define and measure necrosis in contrast-enhanced CT images. Although, the software is tested here on renal masses, it can be re-configured to assess tumor necrosis across variety of tumors from different body sites, providing a generalized, open, portable, and extensible quantitative analysis platform that is widely applicable across cancer types to quantify tumor necrosis.

Single-exposure quantitative phase imaging in color-coded LED microscopy.

PubMed

Lee, Wonchan; Jung, Daeseong; Ryu, Suho; Joo, Chulmin

2017-04-03

We demonstrate single-shot quantitative phase imaging (QPI) in a platform of color-coded LED microscopy (cLEDscope). The light source in a conventional microscope is replaced by a circular LED pattern that is trisected into subregions with equal area, assigned to red, green, and blue colors. Image acquisition with a color image sensor and subsequent computation based on weak object transfer functions allow for the QPI of a transparent specimen. We also provide a correction method for color-leakage, which may be encountered in implementing our method with consumer-grade LEDs and image sensors. Most commercially available LEDs and image sensors do not provide spectrally isolated emissions and pixel responses, generating significant error in phase estimation in our method. We describe the correction scheme for this color-leakage issue, and demonstrate improved phase measurement accuracy. The computational model and single-exposure QPI capability of our method are presented by showing images of calibrated phase samples and cellular specimens.

Analysis of Intervention Strategies for Inhalation Exposure to Polycyclic Aromatic Hydrocarbons and Associated Lung Cancer Risk Based on a Monte Carlo Population Exposure Assessment Model

PubMed Central

Zhou, Bin; Zhao, Bin

2014-01-01

It is difficult to evaluate and compare interventions for reducing exposure to air pollutants, including polycyclic aromatic hydrocarbons (PAHs), a widely found air pollutant in both indoor and outdoor air. This study presents the first application of the Monte Carlo population exposure assessment model to quantify the effects of different intervention strategies on inhalation exposure to PAHs and the associated lung cancer risk. The method was applied to the population in Beijing, China, in the year 2006. Several intervention strategies were designed and studied, including atmospheric cleaning, smoking prohibition indoors, use of clean fuel for cooking, enhancing ventilation while cooking and use of indoor cleaners. Their performances were quantified by population attributable fraction (PAF) and potential impact fraction (PIF) of lung cancer risk, and the changes in indoor PAH concentrations and annual inhalation doses were also calculated and compared. The results showed that atmospheric cleaning and use of indoor cleaners were the two most effective interventions. The sensitivity analysis showed that several input parameters had major influence on the modeled PAH inhalation exposure and the rankings of different interventions. The ranking was reasonably robust for the remaining majority of parameters. The method itself can be extended to other pollutants and in different places. It enables the quantitative comparison of different intervention strategies and would benefit intervention design and relevant policy making. PMID:24416436

Analysis of intervention strategies for inhalation exposure to polycyclic aromatic hydrocarbons and associated lung cancer risk based on a Monte Carlo population exposure assessment model.

PubMed

Zhou, Bin; Zhao, Bin

2014-01-01

It is difficult to evaluate and compare interventions for reducing exposure to air pollutants, including polycyclic aromatic hydrocarbons (PAHs), a widely found air pollutant in both indoor and outdoor air. This study presents the first application of the Monte Carlo population exposure assessment model to quantify the effects of different intervention strategies on inhalation exposure to PAHs and the associated lung cancer risk. The method was applied to the population in Beijing, China, in the year 2006. Several intervention strategies were designed and studied, including atmospheric cleaning, smoking prohibition indoors, use of clean fuel for cooking, enhancing ventilation while cooking and use of indoor cleaners. Their performances were quantified by population attributable fraction (PAF) and potential impact fraction (PIF) of lung cancer risk, and the changes in indoor PAH concentrations and annual inhalation doses were also calculated and compared. The results showed that atmospheric cleaning and use of indoor cleaners were the two most effective interventions. The sensitivity analysis showed that several input parameters had major influence on the modeled PAH inhalation exposure and the rankings of different interventions. The ranking was reasonably robust for the remaining majority of parameters. The method itself can be extended to other pollutants and in different places. It enables the quantitative comparison of different intervention strategies and would benefit intervention design and relevant policy making.

Probabilistic Exposure Analysis for Chemical Risk Characterization

PubMed Central

Bogen, Kenneth T.; Cullen, Alison C.; Frey, H. Christopher; Price, Paul S.

2009-01-01

This paper summarizes the state of the science of probabilistic exposure assessment (PEA) as applied to chemical risk characterization. Current probabilistic risk analysis methods applied to PEA are reviewed. PEA within the context of risk-based decision making is discussed, including probabilistic treatment of related uncertainty, interindividual heterogeneity, and other sources of variability. Key examples of recent experience gained in assessing human exposures to chemicals in the environment, and other applications to chemical risk characterization and assessment, are presented. It is concluded that, although improvements continue to be made, existing methods suffice for effective application of PEA to support quantitative analyses of the risk of chemically induced toxicity that play an increasing role in key decision-making objectives involving health protection, triage, civil justice, and criminal justice. Different types of information required to apply PEA to these different decision contexts are identified, and specific PEA methods are highlighted that are best suited to exposure assessment in these separate contexts. PMID:19223660

Risk assessment from exposure to arsenic, antimony, and selenium in urban gardens (Madrid, Spain).

PubMed

De Miguel, Eduardo; Izquierdo, Miguel; Gómez, Amaia; Mingot, Juan; Barrio-Parra, Fernando

2017-02-01

The authors discuss the geochemical behavior of arsenic (As), antimony (Sb), and selenium (Se) in urban gardens and the human health implications associated with urban agriculture. A total of 42 samples from 7 urban gardens in Madrid, Spain, were collected from the top 20 cm of soil. Concentrations of As, Sb, and Se and the main soil properties (i.e., total iron, pH, texture, calcium carbonate, and organic matter) were determined. A significant correlation was found between As and Sb and calcium carbonate, indicating the possibility of surface adsorption or ligand exchange with the carbonate group. Also, Sb seemed to form stable chelates with soil organic matter. On the other hand, Se showed a significant association with clay and iron content. The concentration of Sb in soil exceeded the recommended value for agricultural use in 70% of the urban gardens. A human health risk assessment resulted in acceptable levels of both noncarcinogenic and carcinogenic risks (although with elevated values of the latter), with As as the main risk driver and soil and food ingestion as the main exposure pathways. The numerical results of the risk assessment should be interpreted with caution given the considerable uncertainties in some exposure variables and the lack of quantitative values for the suspected carcinogenicity of Sb and Se. Environ Toxicol Chem 2017;36:544-550. © 2016 SETAC. © 2016 SETAC.

A review of air exchange rate models for air pollution exposure assessments.

PubMed

Breen, Michael S; Schultz, Bradley D; Sohn, Michael D; Long, Thomas; Langstaff, John; Williams, Ronald; Isaacs, Kristin; Meng, Qing Yu; Stallings, Casson; Smith, Luther

2014-11-01

A critical aspect of air pollution exposure assessments is estimation of the air exchange rate (AER) for various buildings where people spend their time. The AER, which is the rate of exchange of indoor air with outdoor air, is an important determinant for entry of outdoor air pollutants and for removal of indoor-emitted air pollutants. This paper presents an overview and critical analysis of the scientific literature on empirical and physically based AER models for residential and commercial buildings; the models highlighted here are feasible for exposure assessments as extensive inputs are not required. Models are included for the three types of airflows that can occur across building envelopes: leakage, natural ventilation, and mechanical ventilation. Guidance is provided to select the preferable AER model based on available data, desired temporal resolution, types of airflows, and types of buildings included in the exposure assessment. For exposure assessments with some limited building leakage or AER measurements, strategies are described to reduce AER model uncertainty. This review will facilitate the selection of AER models in support of air pollution exposure assessments.

Quantitative ultrasound imaging for monitoring in situ high-intensity focused ultrasound exposure.

PubMed

Ghoshal, Goutam; Kemmerer, Jeremy P; Karunakaran, Chandra; Abuhabsah, Rami; Miller, Rita J; Sarwate, Sandhya; Oelze, Michael L

2014-10-01

Quantitative ultrasound (QUS) imaging is hypothesized to map temperature elevations induced in tissue with high spatial and temporal resolution. To test this hypothesis, QUS techniques were examined to monitor high-intensity focused ultrasound (HIFU) exposure of tissue. In situ experiments were conducted on mammary adenocarcinoma tumors grown in rats and lesions were formed using a HIFU system. A thermocouple was inserted into the tumor to provide estimates of temperature at one location. Backscattered time-domain waveforms from the tissue during exposure were recorded using a clinical ultrasonic imaging system. Backscatter coefficients were estimated using a reference phantom technique. Two parameters were estimated from the backscatter coefficient (effective scatterer diameter (ESD) and effective acoustic concentration (EAC). The changes in the average parameters in the regions corresponding to the HIFU focus over time were correlated to the temperature readings from the thermocouple. The changes in the EAC parameter were consistently correlated to temperature during both heating and cooling of the tumors. The changes in the ESD did not have a consistent trend with temperature. The mean ESD and EAC before exposure were 120 ± 16 μm and 32 ± 3 dB/cm3, respectively, and changed to 144 ± 9 μm and 51 ± 7 dB/cm3, respectively, just before the last HIFU pulse was delivered to the tissue. After the tissue cooled down to 37 °C, the mean ESD and EAC were 126 ± 8 μm and 35 ± 4 dB/cm3, respectively. Peak temperature in the range of 50-60 °C was recorded by a thermocouple placed just behind the tumor. These results suggest that QUS techniques have the potential to be used for non-invasive monitoring of HIFU exposure. © The Author(s) 2014.

Combined visual and semi-quantitative assessment of 123I-FP-CIT SPECT for the diagnosis of dopaminergic neurodegenerative diseases.

PubMed

Ueda, Jun; Yoshimura, Hajime; Shimizu, Keiji; Hino, Megumu; Kohara, Nobuo

2017-07-01

Visual and semi-quantitative assessments of 123 I-FP-CIT single-photon emission computed tomography (SPECT) are useful for the diagnosis of dopaminergic neurodegenerative diseases (dNDD), including Parkinson's disease, dementia with Lewy bodies, progressive supranuclear palsy, multiple system atrophy, and corticobasal degeneration. However, the diagnostic value of combined visual and semi-quantitative assessment in dNDD remains unclear. Among 239 consecutive patients with a newly diagnosed possible parkinsonian syndrome who underwent 123 I-FP-CIT SPECT in our medical center, 114 patients with a disease duration less than 7 years were diagnosed as dNDD with the established criteria or as non-dNDD according to clinical judgment. We retrospectively examined their clinical characteristics and visual and semi-quantitative assessments of 123 I-FP-CIT SPECT. The striatal binding ratio (SBR) was used as a semi-quantitative measure of 123 I-FP-CIT SPECT. We calculated the sensitivity and specificity of visual assessment alone, semi-quantitative assessment alone, and combined visual and semi-quantitative assessment for the diagnosis of dNDD. SBR was correlated with visual assessment. Some dNDD patients with a normal visual assessment had an abnormal SBR, and vice versa. There was no statistically significant difference between sensitivity of the diagnosis with visual assessment alone and semi-quantitative assessment alone (91.2 vs. 86.8%, respectively, p = 0.29). Combined visual and semi-quantitative assessment demonstrated superior sensitivity (96.7%) to visual assessment (p = 0.03) or semi-quantitative assessment (p = 0.003) alone with equal specificity. Visual and semi-quantitative assessments of 123 I-FP-CIT SPECT are helpful for the diagnosis of dNDD, and combined visual and semi-quantitative assessment shows superior sensitivity with equal specificity.

Objective, Quantitative, Data-Driven Assessment of Chemical Probes.

PubMed

Antolin, Albert A; Tym, Joseph E; Komianou, Angeliki; Collins, Ian; Workman, Paul; Al-Lazikani, Bissan

2018-02-15

Chemical probes are essential tools for understanding biological systems and for target validation, yet selecting probes for biomedical research is rarely based on objective assessment of all potential compounds. Here, we describe the Probe Miner: Chemical Probes Objective Assessment resource, capitalizing on the plethora of public medicinal chemistry data to empower quantitative, objective, data-driven evaluation of chemical probes. We assess >1.8 million compounds for their suitability as chemical tools against 2,220 human targets and dissect the biases and limitations encountered. Probe Miner represents a valuable resource to aid the identification of potential chemical probes, particularly when used alongside expert curation. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Human health exposure assessment for Rocky Mountain Arsenal study area evaluations. Volume 6-C. Southern study area exposure assessment version 4. 1. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The objectives of the Human Health Exposure Assessment include: (1) estimate the type and magnitude of exposures to contaminants; (2) Identify contaminants of concern; (3) Identify sites for remedial action; (4) Recommend sites for the no action remedial alternative; and (5) Provide a basis for detailed characterization of the risk associated with all sites. This document consists of the following: An executive summary. Vol I - Land use and exposed population evaluations. Vol. II III - Toxicity assessment (includes army and shell toxicity profiles). Vol. IV - PPLV Methodology. Vol. V - PPLV Calculations. Vol. VI - Study area exposuremore » analysis A introduction, B Western study ares, C Southern study area, D northern Central study area, E Central study area, F Eastern study area, G South plants study area, and H North plants study area. Vol. VII - Summary exposure assessment.« less

Design and acceptability of the Aviation Laser Exposure Self-Assessment (ALESA).

PubMed

Waggel, Stephanie E; Hutchison, Ewan J

2013-03-01

There is an increase in reports of aircraft exposed to lasers directed from the ground. Approximately 2300 cases were reported to the United Kingdom Civil Aviation Authority (UK CAA) in 2011. While the likelihood of injuries directly resulting from such exposure is currently low, this may increase with the increasing power of lasers. A project was undertaken to develop a rapid self-assessment tool that would assist pilots in determining whether permanent injury has occurred after eye exposure to a laser and whether professional assessment should be sought. Laser incidents reported to the UK CAA were analyzed. With the aid of expert advice, the Aviation Laser Exposure Self-Assessment (ALESA) tool was produced using key aspects of illumination needed to determine the risk of harm. There were 25 pilots and flight crewmembers who have experienced aviation laser exposure who were given the tool and their response was assessed with a questionnaire. There was a favorable response to five of the six measured aspects of the ALESA. The ALESA is considered a useful tool for pilots following laser exposure during flight. The UK CAA is making the tool available through its website.

Hotspot Identification for Shanghai Expressways Using the Quantitative Risk Assessment Method

PubMed Central

Chen, Can; Li, Tienan; Sun, Jian; Chen, Feng

2016-01-01

Hotspot identification (HSID) is the first and key step of the expressway safety management process. This study presents a new HSID method using the quantitative risk assessment (QRA) technique. Crashes that are likely to happen for a specific site are treated as the risk. The aggregation of the crash occurrence probability for all exposure vehicles is estimated based on the empirical Bayesian method. As for the consequences of crashes, crashes may not only cause direct losses (e.g., occupant injuries and property damages) but also result in indirect losses. The indirect losses are expressed by the extra delays calculated using the deterministic queuing diagram method. The direct losses and indirect losses are uniformly monetized to be considered as the consequences of this risk. The potential costs of crashes, as a criterion to rank high-risk sites, can be explicitly expressed as the sum of the crash probability for all passing vehicles and the corresponding consequences of crashes. A case study on the urban expressways of Shanghai is presented. The results show that the new QRA method for HSID enables the identification of a set of high-risk sites that truly reveal the potential crash costs to society. PMID:28036009

Multiparametric Quantitative Ultrasound Imaging in Assessment of Chronic Kidney Disease.

PubMed

Gao, Jing; Perlman, Alan; Kalache, Safa; Berman, Nathaniel; Seshan, Surya; Salvatore, Steven; Smith, Lindsey; Wehrli, Natasha; Waldron, Levi; Kodali, Hanish; Chevalier, James

2017-11-01

To evaluate the value of multiparametric quantitative ultrasound imaging in assessing chronic kidney disease (CKD) using kidney biopsy pathologic findings as reference standards. We prospectively measured multiparametric quantitative ultrasound markers with grayscale, spectral Doppler, and acoustic radiation force impulse imaging in 25 patients with CKD before kidney biopsy and 10 healthy volunteers. Based on all pathologic (glomerulosclerosis, interstitial fibrosis/tubular atrophy, arteriosclerosis, and edema) scores, the patients with CKD were classified into mild (no grade 3 and <2 of grade 2) and moderate to severe (at least 2 of grade 2 or 1 of grade 3) CKD groups. Multiparametric quantitative ultrasound parameters included kidney length, cortical thickness, pixel intensity, parenchymal shear wave velocity, intrarenal artery peak systolic velocity (PSV), end-diastolic velocity (EDV), and resistive index. We tested the difference in quantitative ultrasound parameters among mild CKD, moderate to severe CKD, and healthy controls using analysis of variance, analyzed correlations of quantitative ultrasound parameters with pathologic scores and the estimated glomerular filtration rate (GFR) using Pearson correlation coefficients, and examined the diagnostic performance of quantitative ultrasound parameters in determining moderate CKD and an estimated GFR of less than 60 mL/min/1.73 m 2 using receiver operating characteristic curve analysis. There were significant differences in cortical thickness, pixel intensity, PSV, and EDV among the 3 groups (all P < .01). Among quantitative ultrasound parameters, the top areas under the receiver operating characteristic curves for PSV and EDV were 0.88 and 0.97, respectively, for determining pathologic moderate to severe CKD, and 0.76 and 0.86 for estimated GFR of less than 60 mL/min/1.73 m 2 . Moderate to good correlations were found for PSV, EDV, and pixel intensity with pathologic scores and estimated GFR. The

Human exposure assessment and the National Toxicology Program.

PubMed Central

Lucier, G W; Schecter, A

1998-01-01

The National Institute of Environmental Health Sciences/National Toxicology Program (NIEHS/NTP) is developing a new interagency initiative in exposure assessment. This initiative involves the NIEHS, the Centers for Disease Control and Prevention through its National Center for Environmental Health, the National Institute for Occupational Safety and Health, the EPA, and other participating institutes and agencies of the NTP. This initiative will benefit public health and priority setting in a number of ways. First, as discussed above, it will strengthen the scientific foundation for risk assessments by the development of more credible exposure/response relationships in people by improving cross-species extrapolation, the development of biologically based dose-response models, and the identification of sensitive subpopulations and for "margin of exposure" based estimates of risk. Second, it will provide the kind of information necessary for deciding which chemicals should be studied with the limited resources available for toxicological testing. For example, there are 85,000 chemicals in commerce today, and the NTP can only provide toxicological evaluations on 10-20 per year. Third, we would use the information obtained from the exposure initiative to focus our research on mixtures that are actually present in people's bodies. Fourth, we would obtain information on the kinds and amount of chemicals in children and other potentially sensitive subpopulations. Determinations of whether additional safety factors need to be applied to children must rest, in part, upon comparative exposure analyses between children and adults. Fifth, this initiative, taken together with the environmental genome initiative, will provide the science base essential for meaningful studies on gene/environment interactions, particularly for strengthening the evaluation of epidemiology studies. Sixth, efficacy of public health policies aimed at reducing human exposure to chemical agents could be

The Quantitative Reasoning for College Science (QuaRCS) Assessment: Emerging Themes from 5 Years of Data

NASA Astrophysics Data System (ADS)

Follette, Katherine; Dokter, Erin; Buxner, Sanlyn

2018-01-01

The Quantitative Reasoning for College Science (QuaRCS) Assessment is a validated assessment instrument that was designed to measure changes in students' quantitative reasoning skills, attitudes toward mathematics, and ability to accurately assess their own quantitative abilities. It has been administered to more than 5,000 students at a variety of institutions at the start and end of a semester of general education college science instruction. I will begin by briefly summarizing our published work surrounding validation of the instrument and identification of underlying attitudinal factors (composite variables identified via factor analysis) that predict 50% of the variation in students' scores on the assessment. I will then discuss more recent unpublished work, including: (1) Development and validation of an abbreviated version of the assessment (The QuaRCS Light), which results in marked improvements in students' ability to maintain a high effort level throughout the assessment and has broad implications for quantitative reasoning assessments in general, and (2) Our efforts to revise the attitudinal portion of the assessment to better assess math anxiety level, another key factor in student performance on numerical assessments.

Quantitative Prediction of Systemic Toxicity Points of Departure (OpenTox USA 2017)

EPA Science Inventory

Human health risk assessment associated with environmental chemical exposure is limited by the tens of thousands of chemicals little or no experimental in vivo toxicity data. Data gap filling techniques, such as quantitative models based on chemical structure information, are c...

Range-Finding Risk Assessment of Inhalation Exposure to Nanodiamonds in a Laboratory Environment

PubMed Central

Koivisto, Antti J.; Palomäki, Jaana E.; Viitanen, Anna-Kaisa; Siivola, Kirsi M.; Koponen, Ismo K.; Yu, Mingzhou; Kanerva, Tomi S.; Norppa, Hannu; Alenius, Harri T.; Hussein, Tareq; Savolainen, Kai M.; Hämeri, Kaarle J.

2014-01-01

This study considers fundamental methods in occupational risk assessment of exposure to airborne engineered nanomaterials. We discuss characterization of particle emissions, exposure assessment, hazard assessment with in vitro studies, and risk range characterization using calculated inhaled doses and dose-response translated to humans from in vitro studies. Here, the methods were utilized to assess workers’ risk range of inhalation exposure to nanodiamonds (NDs) during handling and sieving of ND powder. NDs were agglomerated to over 500 nm particles, and mean exposure levels of different work tasks varied from 0.24 to 4.96 µg·m−3 (0.08 to 0.74 cm−3). In vitro-experiments suggested that ND exposure may cause a risk for activation of inflammatory cascade. However, risk range characterization based on in vitro dose-response was not performed because accurate assessment of delivered (settled) dose on the cells was not possible. Comparison of ND exposure with common pollutants revealed that ND exposure was below 5 μg·m−3, which is one of the proposed exposure limits for diesel particulate matter, and the workers’ calculated dose of NDs during the measurement day was 74 ng which corresponded to 0.02% of the modeled daily (24 h) dose of submicrometer urban air particles. PMID:24840353

European consumer exposure to cosmetic products, a framework for conducting population exposure assessments.

PubMed

Hall, B; Tozer, S; Safford, B; Coroama, M; Steiling, W; Leneveu-Duchemin, M C; McNamara, C; Gibney, M

2007-11-01

Access to reliable exposure data is essential to evaluate the toxicological safety of ingredients in cosmetic products. This study was carried out by European cosmetic manufacturers acting within the trade association Colipa, with the aim to construct a probabilistic European population model of exposure. The study updates, in distribution form, the current exposure data on daily quantities of six cosmetic products. Data were collected using a combination of market information databases and a controlled product use study. In total 44,100 households and 18,057 individual consumers in five European countries provided data using their own products. All product use occasions were recorded, including those outside of home. The raw data were analysed using Monte Carlo simulation and a European Statistical Population Model of exposure was constructed. A significant finding was an inverse correlation between frequency of product use and quantity used per application for body lotion, facial moisturiser, toothpaste and shampoo. Thus it is not appropriate to calculate daily exposure to these products by multiplying the maximum frequency value by the maximum quantity per event value. The results largely confirm the exposure parameters currently used by the cosmetic industry. Design of this study could serve as a model for future assessments of population exposure to chemicals in products other than cosmetics.

Assessment of food intake input distributions for use in probabilistic exposure assessments of food additives.

PubMed

Gilsenan, M B; Lambe, J; Gibney, M J

2003-11-01

A key component of a food chemical exposure assessment using probabilistic analysis is the selection of the most appropriate input distribution to represent exposure variables. The study explored the type of parametric distribution that could be used to model variability in food consumption data likely to be included in a probabilistic exposure assessment of food additives. The goodness-of-fit of a range of continuous distributions to observed data of 22 food categories expressed as average daily intakes among consumers from the North-South Ireland Food Consumption Survey was assessed using the BestFit distribution fitting program. The lognormal distribution was most commonly accepted as a plausible parametric distribution to represent food consumption data when food intakes were expressed as absolute intakes (16/22 foods) and as intakes per kg body weight (18/22 foods). Results from goodness-of-fit tests were accompanied by lognormal probability plots for a number of food categories. The influence on food additive intake of using a lognormal distribution to model food consumption input data was assessed by comparing modelled intake estimates with observed intakes. Results from the present study advise some level of caution about the use of a lognormal distribution as a mode of input for food consumption data in probabilistic food additive exposure assessments and the results highlight the need for further research in this area.

Drone based measurement system for radiofrequency exposure assessment.

PubMed

Joseph, Wout; Aerts, Sam; Vandenbossche, Matthias; Thielens, Arno; Martens, Luc

2016-03-10

For the first time, a method to assess radiofrequency (RF) electromagnetic field (EMF) exposure of the general public in real environments with a true free-space antenna system is presented. Using lightweight electronics and multiple antennas placed on a drone, it is possible to perform exposure measurements. This technique will enable researchers to measure three-dimensional RF-EMF exposure patterns accurately in the future and at locations currently difficult to access. A measurement procedure and appropriate measurement settings have been developed. As an application, outdoor measurements are performed as a function of height up to 60 m for Global System for Mobile Communications (GSM) 900 MHz base station exposure. Bioelectromagnetics. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Polyfluoroalkyl Chemicals and Learning and Developmental Disorders: Epidemiology and Exposure Assessment

ERIC Educational Resources Information Center

Hoffman, Jennifer Kate

2010-01-01

This dissertation has two areas of focus: learning and developmental disorders (LDDs) and polyfluoroalkyl chemicals (PFCs). Epidemiological and exposure assessment methods are applied to each. The first paper used geographic location as a surrogate for exposure and broadly assesses the effect of the environment, both physical and social, on LDD…

A Quantitative ADME-base Tool for Exploring Human ...

EPA Pesticide Factsheets

Exposure to a wide range of chemicals through our daily habits and routines is ubiquitous and largely unavoidable within modern society. The potential for human exposure, however, has not been quantified for the vast majority of chemicals with wide commercial use. Creative advances in exposure science are needed to support efficient and effective evaluation and management of chemical risks, particularly for chemicals in consumer products. The U.S. Environmental Protection Agency Office of Research and Development is developing, or collaborating in the development of, scientifically-defensible methods for making quantitative or semi-quantitative exposure predictions. The Exposure Prioritization (Ex Priori) model is a simplified, quantitative visual dashboard that provides a rank-ordered internalized dose metric to simultaneously explore exposures across chemical space (not chemical by chemical). Diverse data streams are integrated within the interface such that different exposure scenarios for “individual,” “population,” or “professional” time-use profiles can be interchanged to tailor exposure and quantitatively explore multi-chemical signatures of exposure, internalized dose (uptake), body burden, and elimination. Ex Priori has been designed as an adaptable systems framework that synthesizes knowledge from various domains and is amenable to new knowledge/information. As such, it algorithmically captures the totality of exposure across pathways. It

Comparison of indoor air sampling and dust collection methods for fungal exposure assessment using quantitative PCR.

PubMed

Cox, Jennie; Indugula, Reshmi; Vesper, Stephen; Zhu, Zheng; Jandarov, Roman; Reponen, Tiina

2017-10-18

Evaluating fungal contamination indoors is complicated because of the many different sampling methods utilized. In this study, fungal contamination was evaluated using five sampling methods and four matrices for results. The five sampling methods were a 48 hour indoor air sample collected with a Button™ inhalable aerosol sampler and four types of dust samples: a vacuumed floor dust sample, newly settled dust collected for four weeks onto two types of electrostatic dust cloths (EDCs) in trays, and a wipe sample of dust from above floor surfaces. The samples were obtained in the bedrooms of asthmatic children (n = 14). Quantitative polymerase chain reaction (qPCR) was used to analyze the dust and air samples for the 36 fungal species that make up the Environmental Relative Moldiness Index (ERMI). The results from the samples were compared by four matrices: total concentration of fungal cells, concentration of fungal species associated with indoor environments, concentration of fungal species associated with outdoor environments, and ERMI values (or ERMI-like values for air samples). The ERMI values for the dust samples and the ERMI-like values for the 48 hour air samples were not significantly different. The total cell concentrations of the 36 species obtained with the four dust collection methods correlated significantly (r = 0.64-0.79, p < 0.05), with the exception of the vacuumed floor dust and newly settled dust. In addition, fungal cell concentrations of indoor associated species correlated well between all four dust sampling methods (r = 0.68-0.86, p < 0.01). No correlation was found between the fungal concentrations in the air and dust samples primarily because of differences in concentrations of Cladosporium cladosporioides Type 1 and Epicoccum nigrum. A representative type of dust sample and a 48 hour air sample might both provide useful information about fungal exposures.

Indoor Exposure and Adverse Birth Outcomes Related to Fetal Growth, Miscarriage and Prematurity—A Systematic Review

PubMed Central

Patelarou, Evridiki; Kelly, Frank J.

2014-01-01

The purpose of this review was to summarize existing epidemiological evidence of the association between quantitative estimates of indoor air pollution and all-day personal exposure with adverse birth outcomes including fetal growth, prematurity and miscarriage. We carried out a systematic literature search of MEDLINE and EMBASE databases with the aim of summarizing and evaluating the results of peer-reviewed epidemiological studies undertaken in “westernized” countries that have assessed indoor air pollution and all-day personal exposure with specific quantitative methods. This comprehensive literature search identified 16 independent studies which were deemed relevant for further review and two additional studies were added through searching the reference lists of all included studies. Two reviewers independently and critically appraised all eligible articles using the Critical Appraisal Skills Programme (CASP) tool. Of the 18 selected studies, 14 adopted a prospective cohort design, three were case-controls and one was a retrospective cohort study. In terms of pollutants of interest, seven studies assessed exposure to electro-magnetic fields, four studies assessed exposure to polycyclic aromatic hydrocarbons, four studies assessed PM2.5 exposure and three studies assessed benzene, phthalates and noise exposure respectively. Furthermore, 12 studies examined infant growth as the main birth outcome of interest, six examined spontaneous abortion and three studies assessed gestational age at birth and preterm delivery. This survey demonstrates that there is insufficient research on the possible association of indoor exposure and early life effects and that further research is needed. PMID:24896737

Quantitative microbial risk assessment of Cryptosporidium and Giardia in well water from a native community of Mexico.

PubMed

Balderrama-Carmona, Ana Paola; Gortáres-Moroyoqui, Pablo; Álvarez-Valencia, Luis Humberto; Castro-Espinoza, Luciano; Balderas-Cortés, José de Jesús; Mondaca-Fernández, Iram; Chaidez-Quiroz, Cristóbal; Meza-Montenegro, María Mercedes

2015-01-01

Cryptosporidium and Giardia are gastrointestinal disease-causing organisms transmitted by the fecal-oral route, zoonotic and prevalent in all socioeconomic segments with greater emphasis in rural communities. The goal of this study was to assess the risk of cryptosporidiosis and giardiasis of Potam dwellers consuming drinking water from communal well water. To achieve the goal, quantitative microbial risk assessment (QMRA) was carried out as follows: (a) identification of Cryptosporidium oocysts and Giardia cysts in well water samples by information collection rule method, (b) assessment of exposure to healthy Potam residents, (c) dose-response modelling, and (d) risk characterization using an exponential model. All well water samples tested were positive for Cryptosporidium and Giardia. The QMRA results indicate a mean of annual risks of 99:100 (0.99) for cryptosporidiosis and 1:1 (1.0) for giardiasis. The outcome of the present study may drive decision-makers to establish an educational and treatment program to reduce the incidence of parasite-borne intestinal infection in the Potam community, and to conduct risk analysis programs in other similar rural communities in Mexico.

Source-to-Outcome Microbial Exposure and Risk Modeling Framework

EPA Science Inventory

A Quantitative Microbial Risk Assessment (QMRA) is a computer-based data-delivery and modeling approach that integrates interdisciplinary fate/transport, exposure, and impact models and databases to characterize potential health impacts/risks due to pathogens. As such, a QMRA ex...

Occupational dermal exposure to nanoparticles and nano-enabled products: Part 2, exploration of exposure processes and methods of assessment.

PubMed

Brouwer, Derk H; Spaan, Suzanne; Roff, Martin; Sleeuwenhoek, Anne; Tuinman, Ilse; Goede, Henk; van Duuren-Stuurman, Birgit; Filon, Francesca Larese; Bello, Dhimiter; Cherrie, John W

2016-08-01

Over the past decade, the primary focus of nanotoxicology and nanoenvironmental health and safety efforts has been largely on inhalation exposure to engineered nanomaterials, at the production stage, and much less on considering risks along the life cycle of nano-enabled products. Dermal exposure to nanomaterials and its health impact has been studied to a much lesser extent, and mostly in the context of intentional exposure to nano-enabled products such as in nanomedicine, cosmetics and personal care products. How concerning is dermal exposure to such nanoparticles in the context of occupational exposures? When and how should we measure it? In the first of a series of two papers (Larese Filon et al., 2016), we focused our attention on identifying conditions or situations, i.e. a combination of nanoparticle physico-chemical properties, skin barrier integrity, and occupations with high prevalence of skin disease, which deserve further investigation. This second paper focuses on the broad question of dermal exposure assessment to nanoparticles and attempts to give an overview of the mechanisms of occupational dermal exposure to nanoparticles and nano-enabled products and explores feasibility and adequacy of various methods of quantifying dermal exposure to NOAA. We provide here a conceptual framework for screening, prioritization, and assessment of dermal exposure to NOAA in occupational settings, and integrate it into a proposed framework for risk assessment. Copyright © 2016 Elsevier GmbH. All rights reserved.

ALVEOLAR BREATH SAMPLING AND ANALYSIS IN HUMAN EXPOSURE ASSESSMENT STUDIES

EPA Science Inventory

Alveolar breath sampling and analysis can be extremely useful in exposure assessment studies involving volatile organic compounds (VOCs). Over recent years scientists from the EPA's National Exposure Research Laboratory have developed and refined an alveolar breath collection ...

Chemistry, manufacturing and exposure assessments to support generally recognized as safe (GRAS) determinations.

PubMed

Barraj, Leila; Murphy, Mary; Tran, Nga; Petersen, Barbara

2016-08-01

Identity, stability, purity, intended use levels in what foods and technical effects, and probable intake are among the key components in an assessment to support GRAS determinations. The specifications of identity of a food substance are an important component of the safety assessment as changes in the physical and chemical properties of a food substance can influence its technical effect in food and can influence its nutritional or toxicological properties of the food substance. Estimating exposure is a key determining step in the safety evaluation of a food substance. Intake assessment in GRAS determination is necessarily comprehensive based on cumulative exposure, i.e. proposed new uses plus background dietary exposure. Intake estimates for safety assurance in a GRAS determination also represent conservative overestimate of chronic exposure as they are based on 2-day average daily intake and the upper percentile (90th) intake among consumers. In contrast, in a nutrient assessment where realistic intake estimates are of interest, usual intake estimates are relied upon. It should also be noted that intake estimates for GRAS determinations are also more conservative than estimate of dietary exposure by EPA (FIFRA), where mean per capita are used to assess chronic exposure. Overall, for safety assurance, intake assessments in GRAS determinations are comprehensively cumulative and typically conservative overestimate of exposures. Copyright © 2016. Published by Elsevier Inc.

Development of risk-based nanomaterial groups for occupational exposure control

NASA Astrophysics Data System (ADS)

Kuempel, E. D.; Castranova, V.; Geraci, C. L.; Schulte, P. A.

2012-09-01

Given the almost limitless variety of nanomaterials, it will be virtually impossible to assess the possible occupational health hazard of each nanomaterial individually. The development of science-based hazard and risk categories for nanomaterials is needed for decision-making about exposure control practices in the workplace. A possible strategy would be to select representative (benchmark) materials from various mode of action (MOA) classes, evaluate the hazard and develop risk estimates, and then apply a systematic comparison of new nanomaterials with the benchmark materials in the same MOA class. Poorly soluble particles are used here as an example to illustrate quantitative risk assessment methods for possible benchmark particles and occupational exposure control groups, given mode of action and relative toxicity. Linking such benchmark particles to specific exposure control bands would facilitate the translation of health hazard and quantitative risk information to the development of effective exposure control practices in the workplace. A key challenge is obtaining sufficient dose-response data, based on standard testing, to systematically evaluate the nanomaterials' physical-chemical factors influencing their biological activity. Categorization processes involve both science-based analyses and default assumptions in the absence of substance-specific information. Utilizing data and information from related materials may facilitate initial determinations of exposure control systems for nanomaterials.

Improving the relevance and efficiency of human exposure assessments within the process of regulatory risk assessment.

PubMed

Money, Chris

2018-01-24

The process for undertaking exposure assessments varies dependent on its purpose. But for exposure assessments to be relevant and accurate, they are reliant on access to reliable information on key exposure determinants. Acquiring such information is seldom straightforward and can take significant time and resources. This articles examines how the application of tiered and targeted approaches to information acquisition, within the context of European human health risk assessments, can not only lead to improvements in the efficiency and effectiveness of the process but also in the confidence of stakeholders in its outputs. The article explores how the benefits might be further improved through the coordination of such activities, as well as those areas that represent barriers to wider international harmonisation.

[The key problems in the population exposure assessment of hazardous chemicals accidents].

PubMed

Pan, L J; Liu, F P; Zhang, X; Bai, X T; Shi, X M

2016-07-06

Serious accidents of hazardous chemicals can cause a variety of acute or chronic impairment in human health. The effects of hazardous chemicals on human health can be identified by carrying on population exposure assessment. Through analyzing the domestic and overseas population exposure assessment cases related to hazardous chemicals accidents, we summarized that the base and key of the population exposure assessment were to identify the characteristics of the chemicals , delimit the area and the population exposed to the chemicals, and collect the data of the monitored chemicals and the population health in the polluted area.

Hydrogen quantitative risk assessment workshop proceedings.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Groth, Katrina M.; Harris, Aaron P.

2013-09-01

The Quantitative Risk Assessment (QRA) Toolkit Introduction Workshop was held at Energetics on June 11-12. The workshop was co-hosted by Sandia National Laboratories (Sandia) and HySafe, the International Association for Hydrogen Safety. The objective of the workshop was twofold: (1) Present a hydrogen-specific methodology and toolkit (currently under development) for conducting QRA to support the development of codes and standards and safety assessments of hydrogen-fueled vehicles and fueling stations, and (2) Obtain feedback on the needs of early-stage users (hydrogen as well as potential leveraging for Compressed Natural Gas [CNG], and Liquefied Natural Gas [LNG]) and set priorities for %E2%80%9CVersionmore » 1%E2%80%9D of the toolkit in the context of the commercial evolution of hydrogen fuel cell electric vehicles (FCEV). The workshop consisted of an introduction and three technical sessions: Risk Informed Development and Approach; CNG/LNG Applications; and Introduction of a Hydrogen Specific QRA Toolkit.« less

MULTIMEDIA HUMAN EXPOSURE AND RISK ASSESSMENT MODELING

EPA Science Inventory

Exposures and health risk comparisons from different sites may be used for allocating limited resources available for remedial action. It is important that comparisons between different sites use similar levels of site-specific data and/or screening level data. Risk assessment c...

ELEMENTAL SPECIATION IN ENVIRONMENTAL EXPOSURE ASSESSMENT MATRICES

EPA Science Inventory

Arsenic and tin are two trace metals where exposure assessments have moved towards a speciation based approach because the toxicity is very chemical form dependent. This toxicity difference can be one of many factors which influence the formulation of certain regulations. For a...

Aggregate Exposure and Cumulative Risk Assessment--Integrating Occupational and Non-occupational Risk Factors.

PubMed

Lentz, T J; Dotson, G S; Williams, P R D; Maier, A; Gadagbui, B; Pandalai, S P; Lamba, A; Hearl, F; Mumtaz, M

2015-01-01

Occupational exposure limits have traditionally focused on preventing morbidity and mortality arising from inhalation exposures to individual chemical stressors in the workplace. While central to occupational risk assessment, occupational exposure limits have limited application as a refined disease prevention tool because they do not account for all of the complexities of the work and non-occupational environments and are based on varying health endpoints. To be of greater utility, occupational exposure limits and other risk management tools could integrate broader consideration of risks from multiple exposure pathways and routes (aggregate risk) as well as the combined risk from exposure to both chemical and non-chemical stressors, within and beyond the workplace, including the possibility that such exposures may cause interactions or modify the toxic effects observed (cumulative risk). Although still at a rudimentary stage in many cases, a variety of methods and tools have been developed or are being used in allied risk assessment fields to incorporate such considerations in the risk assessment process. These approaches, which are collectively referred to as cumulative risk assessment, have potential to be adapted or modified for occupational scenarios and provide a tangible path forward for occupational risk assessment. Accounting for complex exposures in the workplace and the broader risks faced by the individual also requires a more complete consideration of the composite effects of occupational and non-occupational risk factors to fully assess and manage worker health problems. Barriers to integrating these different factors remain, but new and ongoing community-based and worker health-related initiatives may provide mechanisms for identifying and integrating risk from aggregate exposures and cumulative risks from all relevant sources, be they occupational or non-occupational.

Characterizing exposure to household air pollution within the Prospective Urban Rural Epidemiology (PURE) study.

PubMed

Arku, Raphael E; Birch, Aaron; Shupler, Matthew; Yusuf, Salim; Hystad, Perry; Brauer, Michael

2018-05-01

Household air pollution (HAP) from combustion of solid fuels is an important contributor to disease burden in low- and middle-income countries (LIC, and MIC). However, current HAP disease burden estimates are based on integrated exposure response curves that are not currently informed by quantitative HAP studies in LIC and MIC. While there is adequate evidence supporting causal relationships between HAP and respiratory disease, large cohort studies specifically examining relationships between quantitative measures of HAP exposure with cardiovascular disease are lacking. We aim to improve upon exposure proxies based on fuel type, and to reduce exposure misclassification by quantitatively measuring exposure across varying cooking fuel types and conditions in diverse geographies and socioeconomic settings. We leverage technology advancements to estimate household and personal PM 2.5 (particles below 2.5 μm in aerodynamic diameter) exposure within the large (N~250,000) multi-country (N~26) Prospective Urban and Rural Epidemiological (PURE) cohort study. Here, we detail the study protocol and the innovative methodologies being used to characterize HAP exposures, and their application in epidemiologic analyses. This study characterizes HAP PM 2.5 exposures for participants in rural communities in ten PURE countries with >10% solid fuel use at baseline (Bangladesh, Brazil, Chile, China, Colombia, India, Pakistan, South Africa, Tanzania, and Zimbabwe). PM 2.5 monitoring includes 48-h cooking area measurements in 4500 households and simultaneous personal monitoring of male and female pairs from 20% of the selected households. Repeat measurements occur in 20% of households to assess impacts of seasonality. Monitoring began in 2017, and will continue through 2019. The Ultrasonic Personal Aerosol Sampler (UPAS), a novel, robust, and inexpensive filter based monitor that is programmable through a dedicated mobile phone application is used for sampling. Pilot study field

Using Geographic Information Systems for Exposure Assessment in Environmental Epidemiology Studies

PubMed Central

Nuckols, John R.; Ward, Mary H.; Jarup, Lars

2004-01-01

Geographic information systems (GIS) are being used with increasing frequency in environmental epidemiology studies. Reported applications include locating the study population by geocoding addresses (assigning mapping coordinates), using proximity analysis of contaminant source as a surrogate for exposure, and integrating environmental monitoring data into the analysis of the health outcomes. Although most of these studies have been ecologic in design, some have used GIS in estimating environmental levels of a contaminant at the individual level and to design exposure metrics for use in epidemiologic studies. In this article we discuss fundamentals of three scientific disciplines instrumental to using GIS in exposure assessment for epidemiologic studies: geospatial science, environmental science, and epidemiology. We also explore how a GIS can be used to accomplish several steps in the exposure assessment process. These steps include defining the study population, identifying source and potential routes of exposure, estimating environmental levels of target contaminants, and estimating personal exposures. We present and discuss examples for the first three steps. We discuss potential use of GIS and global positioning systems (GPS) in the last step. On the basis of our findings, we conclude that the use of GIS in exposure assessment for environmental epidemiology studies is not only feasible but can enhance the understanding of the association between contaminants in our environment and disease. PMID:15198921