Stem anatomy variation in cottonwood

Treesearch

A.N. Foulger; J. Hacskaylo

1968-01-01

Investigations of mineral nutrient-tree growth relationships have dealt mainly with associations involving foliage composition, root formation, or volume production of wood. Few studies have been concerned with changes in wood anatomy associated with element deficiency. In 1949 Davis reported that calcium deficiency was accompanied by a reduction of primary tissue and...

Quantitative cardiac SPECT reconstruction with reduced image degradation due to patient anatomy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tsui, B.M.W.; Zhao, X.D.; Gregoriou, G.K.

1994-12-01

Patient anatomy has complicated effects on cardiac SPECT images. The authors investigated reconstruction methods which substantially reduced these effects for improved image quality. A 3D mathematical cardiac-torso (MCAT) phantom which models the anatomical structures in the thorax region were used in the study. The phantom was modified to simulate variations in patient anatomy including regions of natural thinning along the myocardium, body size, diaphragmatic shape, gender, and size and shape of breasts for female patients. Distributions of attenuation coefficients and Tl-201 uptake in different organs in a normal patient were also simulated. Emission projection data were generated from the phantomsmore » including effects of attenuation and detector response. The authors have observed the attenuation-induced artifacts caused by patient anatomy in the conventional FBP reconstructed images. Accurate attenuation compensation using iterative reconstruction algorithms and attenuation maps substantially reduced the image artifacts and improved quantitative accuracy. They conclude that reconstruction methods which accurately compensate for non-uniform attenuation can substantially reduce image degradation caused by variations in patient anatomy in cardiac SPECT.« less

Wood evidence : proper collection, documentation, and storage of wood evidence from a crime scene

Treesearch

Alex Wiedenhoeft

2006-01-01

Wood can be found at crime scenes in many forms: as a murder weapon, as material used to hide a body, or as trace evidence from forced entry or vandalism. In the course of my work at the Forest Products Laboratory, Center for Wood Anatomy Research, I have been part of several forensic investigations that were adversely affected by inappropriate procedures used to...

Wood anatomy of the neotropical Sapotaceae. VI, Chloroluma

Treesearch

B. F. Kukachka

1978-01-01

The old genus Chloroluma has been reinstated to generic status after having been in synonomy under Chrysophyllum for many years. The description is based on the type species C. gonocarpa which is characterized by: Its clear yellow wood; pores in radial-echelon arrangement; rhombic, two-sized, and microcrystals frequent in the axial parenchyma and wood rays; colored...

Wood anatomy of the neotropical Sapotaceae : XVII. Gambeya

Treesearch

Bohumil Francis Kukachka

1980-01-01

Gambeya is an African genus to which Aubréville added Gambeya excelsa (Huber) Aubr., based on the Amazonian Chrysophyllum excelsum Huber. Whether Gambeya is the appropriate taxon for the American species remains to be resolved. Wood specimens indicate that several species occur in the Americas ranging from Southern Mexico to the Peruvian Amazon. The woods of the...

Wood Chemical Composition in Species of Cactaceae: The Relationship between Lignification and Stem Morphology

PubMed Central

Canché-Escamilla, Gonzalo; Soto-Hernández, Marcos

2015-01-01

In Cactaceae, wood anatomy is related to stem morphology in terms of the conferred support. In species of cacti with dimorphic wood, a unique process occurs in which the cambium stops producing wide-band tracheids (WBTs) and produces fibers; this is associated with the aging of individuals and increases in size. Stem support and lignification have only been studied in fibrous tree-like species, and studies in species with WBTs or dimorphic wood are lacking. In this study, we approach this process with a chemical focus, emphasizing the role of wood lignification. We hypothesized that the degree of wood lignification in Cactaceae increases with height of the species and that its chemical composition varies with wood anatomy. To test this, we studied the chemical composition (cellulose, hemicellulose, and lignin content) in 13 species (2 WBTs wood, 3 dimorphic, and 8 fibrous) with contrasting growth forms. We also analyzed lignification in dimorphic and fibrous species to determine the chemical features of WBTs and fibers and their relationship with stem support. The lignin contents were characterized by Fourier transform infrared spectroscopy and high performance liquid chromatography. We found that 11 species have a higher percentage (>35%) of lignin in their wood than other angiosperms or gymnosperms. The lignin chemical composition in fibrous species is similar to that of other dicots, but it is markedly heterogeneous in non-fibrous species where WBTs are abundant. The lignification in WBTs is associated with the resistance to high water pressure within cells rather than the contribution to mechanical support. Dimorphic wood species are usually richer in syringyl lignin, and tree-like species with lignified rays have more guaiacyl lignin. The results suggest that wood anatomy and lignin distribution play an important role in the chemical composition of wood, and further research is needed at the cellular level. PMID:25880223

Wood chemical composition in species of Cactaceae: the relationship between lignification and stem morphology.

PubMed

Reyes-Rivera, Jorge; Canché-Escamilla, Gonzalo; Soto-Hernández, Marcos; Terrazas, Teresa

2015-01-01

In Cactaceae, wood anatomy is related to stem morphology in terms of the conferred support. In species of cacti with dimorphic wood, a unique process occurs in which the cambium stops producing wide-band tracheids (WBTs) and produces fibers; this is associated with the aging of individuals and increases in size. Stem support and lignification have only been studied in fibrous tree-like species, and studies in species with WBTs or dimorphic wood are lacking. In this study, we approach this process with a chemical focus, emphasizing the role of wood lignification. We hypothesized that the degree of wood lignification in Cactaceae increases with height of the species and that its chemical composition varies with wood anatomy. To test this, we studied the chemical composition (cellulose, hemicellulose, and lignin content) in 13 species (2 WBTs wood, 3 dimorphic, and 8 fibrous) with contrasting growth forms. We also analyzed lignification in dimorphic and fibrous species to determine the chemical features of WBTs and fibers and their relationship with stem support. The lignin contents were characterized by Fourier transform infrared spectroscopy and high performance liquid chromatography. We found that 11 species have a higher percentage (>35%) of lignin in their wood than other angiosperms or gymnosperms. The lignin chemical composition in fibrous species is similar to that of other dicots, but it is markedly heterogeneous in non-fibrous species where WBTs are abundant. The lignification in WBTs is associated with the resistance to high water pressure within cells rather than the contribution to mechanical support. Dimorphic wood species are usually richer in syringyl lignin, and tree-like species with lignified rays have more guaiacyl lignin. The results suggest that wood anatomy and lignin distribution play an important role in the chemical composition of wood, and further research is needed at the cellular level.

Linking wood anatomy and xylogenesis allows pinpointing of climate and drought influences on growth of coexisting conifers in continental Mediterranean climate.

PubMed

Pacheco, Arturo; Camarero, J Julio; Carrer, Marco

2016-04-01

Forecasted warmer and drier conditions will probably lead to reduced growth rates and decreased carbon fixation in long-term woody pools in drought-prone areas. We therefore need a better understanding of how climate stressors such as drought constrain wood formation and drive changes in wood anatomy. Drying trends could lead to reduced growth if they are more intense in spring, when radial growth rates of conifers in continental Mediterranean climates peak. Since tree species from the aforementioned areas have to endure dry summers and also cold winters, we chose two coexisting species: Aleppo pine (Pinus halepensisMill., Pinaceae) and Spanish juniper (Juniperus thuriferaL., Cupressaceae) (10 randomly selected trees per species), to analyze how growth (tree-ring width) and wood-anatomical traits (lumen transversal area, cell-wall thickness, presence of intra-annual density fluctuations-IADFs-in the latewood) responded to climatic variables (minimum and maximum temperatures, precipitation, soil moisture deficit) calculated for different time intervals. Tree-ring width and mean lumen area showed similar year-to-year variability, which indicates that they encoded similar climatic signals. Wet and cool late-winter to early-spring conditions increased lumen area expansion, particularly in pine. In juniper, cell-wall thickness increased when early summer conditions became drier and the frequency of latewood IADFs increased in parallel with late-summer to early-autumn wet conditions. Thus, latewood IADFs of the juniper capture increased water availability during the late growing season, which is reflected in larger tracheid lumens. Soil water availability was one of the main drivers of wood formation and radial growth for the two species. These analyses allow long-term (several decades) growth and wood-anatomical responses to climate to be inferred at intra-annual scales, which agree with the growing patterns already described by xylogenesis approaches for the same

Effects of ring-porous and diffuse-porous stem wood anatomy on the hydraulic parameters used in a water flow and storage model.

PubMed

Steppe, Kathy; Lemeur, Raoul

2007-01-01

Calibration of a recently developed water flow and storage model based on experimental data for a young diffuse-porous beech tree (Fagus sylvatica L.) and a young ring-porous oak tree (Quercus robur L.) revealed that differences in stem wood anatomy between species strongly affect the calibrated values of the hydraulic model parameters. The hydraulic capacitance (C) of the stem storage tissue was higher in oak than in beech (939.8 versus 212.3 mg MPa(-1)). Model simulation of the elastic modulus (epsilon) revealed that this difference was linked to the higher elasticity of the stem storage tissue of oak compared with beech. Furthermore, the hydraulic resistance (R (x)) of beech was about twice that of oak (0.1829 versus 0.1072 MPa s mg(-1)). To determine the physiological meaning of the R (x) parameter identified by model calibration, we analyzed the stem wood anatomy of the beech and oak trees. Calculation of stem specific hydraulic conductivity (k (s)) of beech and oak with the Hagen-Poiseuille equation confirmed the differences in R (x) predicted by the model. The contributions of different vessel diameter classes to the total hydraulic conductivity of the xylem were calculated. As expected, the few big vessels contributed much more to total conductivity than the many small vessels. Compared with beech, the larger vessels of oak resulted in a higher k (s) (10.66 versus 4.90 kg m(-1) s(-1) MPa(-1)). The calculated ratio of k (s) of oak to beech was 2, confirming the R (x) ratio obtained by model calibration. Thus, validation of the R (x) parameter of the model led to identification of its physiological meaning.

Wood Anatomy of the Neotropical Sapotaceae: V. Calocarpum.

DTIC Science & Technology

1978-01-01

Because of this widespread distribution resulting from cultiva- tion , the original range is unknown but believed to be in the general area of southern...General: Wood light brown , rather drab and lusterless in appearance ; with little or no distinction between heartwood and sapwood . Growth rings

Wood Anatomy of the Neotropical Sapotaceae. XX. Manilkara

DTIC Science & Technology

1981-06-01

area , three of which also occur in the Caribbean and Central America. Twenty-six named species were available for this study, but two of these...specimens. Sapwood appreciably lighter in color and usually separated from the heartwood by a transitional zone. Growth rings vague and indistinct. Wood

Gene expression analysis of wood decay fungus Fibroporia Radiculosa grown In ACQ-treated wood

Treesearch

Ayfer Akgul; Ali Akgul; Juliet D. Diehl Tang

2018-01-01

Copper-tolerant brown-rot fungi are able todegrade wood treated with copper or copper-based wood preservatives. This research used quantitative reverse transcriptase polymerase chain reaction to explore what genes of the brown-rot fungus, Fibroporia radiculosa, were expressed when the fungus was overcoming the wood preservatives and decaying the...

Wood anatomy of the neotropical Sapotaceae. XXII, Pradosia

Treesearch

B.F. Kukachka

1981-01-01

As constituted here, the genus Pradosia consists of a group of closely related species including the species attributed to Glycoxylon and Neopometia. The members of Pradosia are readily separable anatomically from other American Sapotaceae by the presence of silica in the wood rays and of microcrystals (crystal sand) in the axial parenchyma. Although Podoluma does...

Comparative wood anatomy of some shrubs native to the Northern Rocky Mountains

Treesearch

Arlene Dale

1968-01-01

This paper describes some xylem characteristics of the more important shrub species of the Northern Rockies and presents a key for identifying shrub-wood specimens by microscopic characters. The paper contains photomicrographs of 55 shrub woods.

Leaf photosynthetic traits scale with hydraulic conductivity and wood density in Panamanian forest canopy trees.

Treesearch

L.S. Santiago; G. Goldstein; F.C. Meinzer; J.B. Fisher; K. Maehado; D. Woodruff; T. Jones

2004-01-01

We investigated how water transport capacity, wood density and wood anatomy were related to leaf photosynthetic traits in two lowland forests in Panama. Leaf-specific hydraulic conductivity (kL) of upper branches was positively correlated with maximum rates of net CO2, assimilation per unit leaf area (Aarea...

Identification of quantitative trait loci influencing wood specific gravity in an outbred pedigree of loblolly pine

Treesearch

A. Groover; M. Devey; T. Fiddler; J. Lee; R. Megraw; T. Mitchel-Olds; B. Sherman; S. Vujcic; C. Williams; D. Neale

1994-01-01

We report the identification of quantitative trait loci (QTL) influencing wood specific gravity (WSG) in an outbred pedigree of loblolly pine (Pinus taeda L.) . QTL mapping in an outcrossing species is complicated by the presence of multiple alleles (>2) at QTL and marker loci. Multiple alleles at QTL allow the examination of interaction among...

Wood Cellular Dendroclimatology: A Pilot Study on Bristlecone Pine in the Southwest US

NASA Astrophysics Data System (ADS)

Ziaco, E.; Biondi, F.; Heinrich, I.

2015-12-01

Tree-rings provide paleoclimatic records at annual to seasonal resolution for regions or periods with no instrumental climatic data. Relationships between climatic variability and wood cellular features allow for a more complete understanding of the physiological mechanisms that control the climatic response of trees. Given the increasing importance of wood anatomy as a source of dendroecological information, such studies are now starting in the US. We analyzed 10 cores of bristlecone pine (Pinus longaeva D.K. Bailey) from a high-elevation site included in the Nevada Climate-ecohydrological Assessment Network (NevCAN). Century-long chronologies (1870-2013) of wood anatomical parameters (lumen area, cell diameter, cell wall thickness) can be developed by capturing strongly contrasted microscopic images using a Confocal Laser Scanning Microscope, and then measuring cellular parameters with task-specific software. Measures of empirical signal strength were used to test the strength of the environmental information embedded in wood anatomy. Correlation functions between ring-width, cellular features, and PRISM climatic variables were produced for the period 1926-2013. Time series of anatomical features present lower autocorrelation compared to ring widths, highlighting the role of environmental conditions occurring at the time of cell formation. Mean chronologies of radial lumen length and cell diameter carry a stronger climatic signal compared to cell wall thickness, and are significantly correlated with climatic variables (maximum temperature and total precipitation) in spring (Mar-Apr) and during the growing season (Jun-Sep), whereas ring widths show weaker or no correlation. Wood anatomy holds great potential to refine dendroclimatic reconstructions at higher temporal resolution, providing better estimates of hydroclimatic variability and plant physiological adaptations in the southwest US.

Wood anatomy of the neotropical Sapotaceae. XVIII, Gomphiluma

Treesearch

B.F. Kukachka

1980-01-01

As now constituted, Gomphiluma consists of two species of small trees limited to the Brazilian Amazon. Formerly submerged in the large genus Pouteria, Gomphiluma was reinstated to generic status by Aubréville in 1961. The pale brown wood of moderate density is quite unlike that of Pouteria and appears more nearly allied with certain species of Micropholis.

Wood anatomy of the neotropical Sapotaceae. IV, Achrouteria

Treesearch

B. F. Kukachka

1978-01-01

Achrouteria pomifera Eyma, the sole representative of the genus for almost 40 years, is distinguished from the world Sapotaceae by the very large silica particles which occur in the wood rays. Anatomically, two groups (species) may be distinguished on the basis of vessel member length and parenchyma seriation. A second species, A. durifructa described in 1974, differs...

Wood anatomy of the neotropical Sapotaceae : XIV. Elaeoluma

Treesearch

Bohumil Francis Kukachka

1980-01-01

The genus Elaeoluma consists of three species distributed in the Amazon Basin, Surinam, Guyana, and Venezuela. The description presented here is based on E. glabrescens of the Amazon Basin. The wood is easily differentiated from all other neotropical Sapotaceae by its pale brown color, reticulate parenchyma, which is hardly discernable with a hand lens, and a low...

Chapter 05: Basic characters used in the identification of wood with a hand lens

Treesearch

Alex Wiedenhoeft

2011-01-01

The characters presented in this chapter represent the minimal set of terms and concepts necessary to build skill and proficiency in wood identification with a hand lens. This list is not exhaustive, nor is it in complete agreement with the characters used by other authors, in other references, or in traditional microscopic wood anatomy.

Wood anatomy of the neotropical Sapotaceae : XVI. Paralabatia

Treesearch

Bohumil Francis Kukachka

1980-01-01

Paralabatia is a small genus of five or six species ranging from the Amazon to the West Indies. From the anatomical standpoint the genus as constituted by Aubréville forms a group of closely related species. In marked contrast the four species cited by Baehni belong to four different anatomical groups. The woods of Paralabatia are somewhat similar to those of...

Wood anatomy of the neotropical Sapotaceae : XV. Sandwithiodoxa

Treesearch

Bohumil Francis Kukachka

1980-01-01

Sandwithiodoxa is a monotypic genus established by Aubréville and Pellegrin based on Pouteria egregia Sandwith, making the new combination Sandwithiodoxa egregia (Sandw.) Aubr. and Pellegr. The wood is light brown, very hard and heavy with an average specific gravity of 1.09. Individual specimens attain a specific gravity of 1.21. Floristically it is said to have...

Compensatory mechanisms mitigate the effect of warming and drought on wood formation.

PubMed

Balducci, Lorena; Cuny, Henri E; Rathgeber, Cyrille B K; Deslauriers, Annie; Giovannelli, Alessio; Rossi, Sergio

2016-06-01

Because of global warming, high-latitude ecosystems are expected to experience increases in temperature and drought events. Wood formation will have to adjust to these new climatic constraints to maintain tree mechanical stability and long-distance water transport. The aim of this study is to understand the dynamic processes involved in wood formation under warming and drought. Xylogenesis, gas exchange, water relations and wood anatomy of black spruce [Picea mariana (Mill.) B.S.P.] saplings were monitored during a greenhouse experiment where temperature was increased during daytime or night-time (+6 °C) combined with a drought period. The kinetics of tracheid development expressed as rate and duration of the xylogenesis sub-processes were quantified using generalized additive models. Drought and warming had a strong influence on cell production, but little effect on wood anatomy. The increase in cell production rate under warmer temperatures, and especially during the night-time warming at the end of the growing season, resulted in wider tree-rings. However, the strong compensation between rates and durations of cell differentiation processes mitigates warming and drought effects on tree-ring structure. Our results allowed quantification of how wood formation kinetics is regulated when water and heat stress increase, allowing trees to adapt to future environmental conditions. © 2015 John Wiley & Sons Ltd.

Renal artery anatomy assessed by quantitative analysis of selective renal angiography in 1,000 patients with hypertension.

PubMed

Lauder, Lucas; Ewen, Sebastian; Tzafriri, Abraham Rami; Edelman, Elazer Reuven; Lüscher, Thomas Felix; Blankenstijn, Peter J; Dörr, Oliver; Schlaich, Markus; Sharif, Faisal; Voskuil, Michiel; Zeller, Thomas; Ukena, Christian; Scheller, Bruno; Böhm, Michael; Mahfoud, Felix

2018-05-20

With increasing attention to renovascular causes and targets for hypertension there arises a critical need for more detailed knowledge of renal arterial anatomy. However, a standardised nomenclature is lacking. The present study sought to develop a standardised nomenclature for renal anatomy considering the complexity and variation of the renal arterial tree and to assess the applicability of the nomenclature. One thousand hypertensive patients underwent invasive selective renal artery angiography in nine centres. Further, renovasography was performed in 249 healthy swine as a surrogate for normotensive anatomy. Anatomical parameters were assessed by quantitative vascular analysis. Patients' mean blood pressure was 168/90±26/17 mmHg. The right main renal artery was longer than the left (41±15 mm vs. 35±13 mm, p<0.001), but the left had a greater diameter (5.4±1.2 vs. 5.2±1.2 mm, p<0.001). Accessory renal arteries and renal artery disease were documented in 22% and 9% of the patients, respectively. Other than exhibiting a longer left main renal artery in uncontrolled hypertensives (+2.7 mm, p=0.034) there was no anatomical difference between patients with controlled and uncontrolled hypertension. Main renal artery mean diameter was smaller in patients with impaired kidney function (GFR <90 ml/min, left -0.5 mm, right -0.4 mm, both p<0.001). Renal arterial anatomy differs between sides but shows no difference between patients with and without blood pressure control. Impaired GFR was associated with small main renal artery diameter.

Using stable isotopes and functional wood anatomy to identify underlying mechanisms of drought tolerance in different provenances of lodgepole pine

NASA Astrophysics Data System (ADS)

Isaac-Renton, Miriam; Montwé, David; Hamann, Andreas; Spiecker, Heinrich; Cherubini, Paolo; Treydte, Kerstin

2016-04-01

Choosing drought-tolerant seed sources for reforestation may help adapt forests to climate change. By combining dendroecological growth analysis with a long-term provenance trial, we assessed growth and drought tolerance of different populations of a wide-ranging conifer, lodgepole pine (Pinus contorta). This experimental design simulated a climate warming scenario through southward seed transfer, and an exceptional drought also occurred in 2002. We felled over 500 trees, representing 23 seed sources, which were grown for 32 years at three warm, dry sites in southern British Columbia, Canada. Northern populations showed poor growth and drought tolerance. These seed sources therefore appear to be especially at risk under climate change. Before recommending assisted migration of southern seeds towards the north, however, it is important to understand the physiological mechanisms underlying these responses. We combine functional wood anatomy with a dual-isotope approach to evaluate these mechanisms to drought response.

Quantitative Macroscopic Anatomy of the Giraffe (Giraffa camelopardalis) Digestive Tract.

PubMed

Sauer, C; Bertelsen, M F; Lund, P; Weisbjerg, M R; Clauss, M

2016-10-01

Quantitative data on digestive anatomy of the world's largest ruminant, the giraffe, are scarce. Data were collected from a total of 25 wild-caught and 13 zoo-housed giraffes. Anatomical measures were quantified by dimension, area or weight and analysed by allometric regression. The majority of measures scaled positively and isometrically to body mass. Giraffes had lower tissue weight of all stomach compartments and longer large intestinal length than cattle. When compared to other ruminants, the giraffe digestive tract showed many of the convergent morphological adaptations attributed to browsing ruminants, for example lower reticular crests, thinner ruminal pillars and smaller surface area of the omasal laminae. Salivary gland weight of the giraffe, however, resembled that of grazing ruminants. This matches a previous finding of similarly small salivary glands in the other extant giraffid, the okapi (Okapia johnstoni), suggesting that not all convergent characteristics need be expressed in all species and that morphological variation between species is a combination of phylogenetic and adaptational signals. © 2015 Blackwell Verlag GmbH.

Wood Anatomy of the Neotropical Sapotaceae. XXXI. Pouteria.

DTIC Science & Technology

1982-10-01

Pouteria that have been excluded for various reasons (see Notes for details). General: Sapwood light brown to brown; heartwood apparently late in formation...and, when present, is usually dark brown or reddish brown and sharply demar- cated from the lighter colored sapwood . Wood hard and heavy, with a...specific gravity range of 0.60 (branchwood) to 1.30 (heartwood); the overall average for all specimens was 0.91 and the majority of these were sapwood or in

Trade-offs between xylem hydraulic properties, wood anatomy and yield in Populus.

PubMed

Hajek, Peter; Leuschner, Christoph; Hertel, Dietrich; Delzon, Sylvain; Schuldt, Bernhard

2014-07-01

Trees face the dilemma that achieving high plant productivity is accompanied by a risk of drought-induced hydraulic failure due to a trade-off in the trees' vascular system between hydraulic efficiency and safety. By investigating the xylem anatomy of branches and coarse roots, and measuring branch axial hydraulic conductivity and vulnerability to cavitation in 4-year-old field-grown aspen plants of five demes (Populus tremula L. and Populus tremuloides Michx.) differing in growth rate, we tested the hypotheses that (i) demes differ in wood anatomical and hydraulic properties, (ii) hydraulic efficiency and safety are related to xylem anatomical traits, and (iii) aboveground productivity and hydraulic efficiency are negatively correlated to cavitation resistance. Significant deme differences existed in seven of the nine investigated branch-related anatomical and hydraulic traits but only in one of the four coarse-root-related anatomical traits; this likely is a consequence of high intra-plant variation in root morphology and the occurrence of a few 'high-conductivity roots'. Growth rate was positively related to branch hydraulic efficiency (xylem-specific conductivity) but not to cavitation resistance; this indicates that no marked trade-off exists between cavitation resistance and growth. Both branch hydraulic safety and hydraulic efficiency significantly depended on vessel size and were related to the genetic distance between the demes, while the xylem pressure causing 88% loss of hydraulic conductivity (P88 value) was more closely related to hydraulic efficiency than the commonly used P50 value. Deme-specific variation in the pit membrane structure may explain why vessel size was not directly linked to growth rate. We conclude that branch hydraulic efficiency is an important growth-influencing trait in aspen, while the assumed trade-off between productivity and hydraulic safety is weak. © The Author 2014. Published by Oxford University Press. All rights reserved

[Influence of sample surface roughness on mathematical model of NIR quantitative analysis of wood density].

PubMed

Huang, An-Min; Fei, Ben-Hua; Jiang, Ze-Hui; Hse, Chung-Yun

2007-09-01

Near infrared spectroscopy is widely used as a quantitative method, and the main multivariate techniques consist of regression methods used to build prediction models, however, the accuracy of analysis results will be affected by many factors. In the present paper, the influence of different sample roughness on the mathematical model of NIR quantitative analysis of wood density was studied. The result of experiments showed that if the roughness of predicted samples was consistent with that of calibrated samples, the result was good, otherwise the error would be much higher. The roughness-mixed model was more flexible and adaptable to different sample roughness. The prediction ability of the roughness-mixed model was much better than that of the single-roughness model.

Pristine Early Eocene wood buried deeply in kimberlite from northern Canada.

PubMed

Wolfe, Alexander P; Csank, Adam Z; Reyes, Alberto V; McKellar, Ryan C; Tappert, Ralf; Muehlenbachs, Karlis

2012-01-01

We report exceptional preservation of fossil wood buried deeply in a kimberlite pipe that intruded northwestern Canada's Slave Province 53.3±0.6 million years ago (Ma), revealed during excavation of diamond source rock. The wood originated from forest surrounding the eruption zone and collapsed into the diatreme before resettling in volcaniclastic kimberlite to depths >300 m, where it was mummified in a sterile environment. Anatomy of the unpermineralized wood permits conclusive identification to the genus Metasequoia (Cupressaceae). The wood yields genuine cellulose and occluded amber, both of which have been characterized spectroscopically and isotopically. From cellulose δ(18)O and δ(2)H measurements, we infer that Early Eocene paleoclimates in the western Canadian subarctic were 12-17°C warmer and four times wetter than present. Canadian kimberlites offer Lagerstätte-quality preservation of wood from a region with limited alternate sources of paleobotanical information.

Branch architecture in Ginkgo biloba: wood anatomy and long shoot-short shoot interactions.

PubMed

Little, Stefan A; Jacobs, Brooke; McKechnie, Steven J; Cooper, Ranessa L; Christianson, Michael L; Jernstedt, Judith A

2013-10-01

Ginkgo, centrally placed in seed plant phylogeny, is considered important in many phylogenetic and evolutionary studies. Shoot dimorphism of Ginkgo has been long noted, but no work has yet been done to evaluate the relationships between overall branch architecture and wood ring characters, shoot growth, and environmental conditions. • Branches, sampled from similar canopy heights, were mapped with the age of each long shoot segment determined by counting annual leaf-scar series on its short shoots. Transverse sections were made for each long shoot segment and an adjacent short shoot; wood ring thickness, number of rings, and number of tracheids/ring were determined. Using branch maps, we identified wood rings for each long shoot segment to year and developmental context of each year (distal short shoot growth only vs. at least one distal long shoot). Climate data were also analyzed in conjunction with developmental context. • Significantly thicker wood rings occur in years with distal long shoot development. The likelihood that a branch produced long shoots in a given year was lower with higher maximum annual temperature. Annual maximum temperature was negatively correlated with ring thickness in microsporangiate trees only. Annual minimum temperatures were correlated differently with ring thickness of megasporangiate and microsporangiate trees, depending on the developmental context. There were no significant effects associated with precipitation. • Overall, developmental context alone predicts wood ring thickness about as well as models that include temperature. This suggests that although climatic factors may be strongly correlated with wood ring data among many gymnosperm taxa, at least for Ginkgo, correlations with climate data are primarily due to changes in proportions of shoot developmental types (LS vs. SS) across branches.

Pristine Early Eocene Wood Buried Deeply in Kimberlite from Northern Canada

PubMed Central

Wolfe, Alexander P.; Csank, Adam Z.; Reyes, Alberto V.; McKellar, Ryan C.; Tappert, Ralf; Muehlenbachs, Karlis

2012-01-01

We report exceptional preservation of fossil wood buried deeply in a kimberlite pipe that intruded northwestern Canada’s Slave Province 53.3±0.6 million years ago (Ma), revealed during excavation of diamond source rock. The wood originated from forest surrounding the eruption zone and collapsed into the diatreme before resettling in volcaniclastic kimberlite to depths >300 m, where it was mummified in a sterile environment. Anatomy of the unpermineralized wood permits conclusive identification to the genus Metasequoia (Cupressaceae). The wood yields genuine cellulose and occluded amber, both of which have been characterized spectroscopically and isotopically. From cellulose δ18O and δ2H measurements, we infer that Early Eocene paleoclimates in the western Canadian subarctic were 12–17°C warmer and four times wetter than present. Canadian kimberlites offer Lagerstätte-quality preservation of wood from a region with limited alternate sources of paleobotanical information. PMID:23029080

Biophysical modelling of intra-ring variations in tracheid features and wood density of Pinus pinaster trees exposed to seasonal droughts

Treesearch

Sarah Wilkinson; Jerome Ogee; Jean-Christophe Domec; Mark Rayment; Lisa Wingate

2015-01-01

Process-based models that link seasonally varying environmental signals to morphological features within tree rings are essential tools to predict tree growth response and commercially important wood quality traits under future climate scenarios. This study evaluated model portrayal of radial growth and wood anatomy observations within a mature maritime pine (Pinus...

Anatomy of the anterior root attachments of the medial and lateral menisci: a quantitative analysis.

PubMed

LaPrade, Christopher M; Ellman, Michael B; Rasmussen, Matthew T; James, Evan W; Wijdicks, Coen A; Engebretsen, Lars; LaPrade, Robert F

2014-10-01

While the biomechanical importance of the meniscal roots has been demonstrated, the anatomy of the anterior meniscal roots remains largely unknown. Defining the quantitative anatomy of the anterior meniscal root attachments is essential for developing improved diagnostic and surgical techniques. The anterior medial (AM) and anterior lateral (AL) meniscal roots could be quantitatively defined relative to open and arthroscopic surgical landmarks. Descriptive laboratory study. Twelve nonpaired human cadaveric knees were used (average age, 51.3 years). A coordinate measuring device quantified the anatomic relationships of the AM and AL root attachments to open and arthroscopic surgical landmarks. The tibial attachments of both anterior roots were defined and quantified by categorizing the fibers of the root as either central, dense attachments or peripheral, supplemental attachments. The center of the tibial tuberosity and the medial tibial eminence apex were 27.0 mm lateral and distal and 27.5 mm posterior to the center of the AM root, respectively. The center of the anterior cruciate ligament (ACL) and the lateral tibial eminence apex were 5.0 mm posteromedial and 14.4 mm posterolateral to the center of the AL root, respectively. The AM root attachment had a mean area of 110.4 mm(2) (95% CI, 92.2-128.5) with a central attachment of 56.3 mm(2) (95% CI, 46.9-65.8). The AL root attachment had a mean area of 140.7 mm(2) (95% CI, 121.6-159.8) and inserted deeply beneath the ACL in all specimens. The overlap of the ACL on the AL root averaged 88.9 mm(2) (95% CI, 63.3-114.6), comprising 63.2% of the AL root attachment. The anterior meniscal roots were identified in relation to pertinent open and arthroscopic landmarks. The extended overlap between the AL root and ACL attachment revealed a more intimate tibial attachment relationship than previously recognized. Quantitative descriptions of the anterior meniscal roots elucidate the relationship between the root attachments

Evolution of wood anatomical characters in Nepenthes and close relatives of Caryophyllales

PubMed Central

Gravendeel, Barbara; de Boer, Hugo; Nylinder, Stephan; van Heuven, Bertie Joan; Sieder, Anton; Sumail, Sukaibin; van Vugt, Rogier; Lens, Frederic

2017-01-01

Abstract Background and Aims Nepenthes attracts wide attention with its spectacularly shaped carnivorous pitchers, cultural value and horticultural curiosity. Despite the plant’s iconic fascination, surprisingly little anatomical detail is known about the genus beyond its modified leaf tip traps. Here, the wood anatomical diversity of Nepenthes is explored. This diversity is further assessed with a phylogenetic framework to investigate whether the wood characters within the genus are relevant from an evolutionary or ecological perspective, or rather depend on differences in developmental stages, growth habits, substrates or precipitation. Methods Observations were performed using light microscopy and scanning electron microscopy. Ancestral states of selected wood and pith characters were reconstructed using an existing molecular phylogeny for Nepenthes and a broader Caryophyllales framework. Pairwise comparisons were assessed for possible relationships between wood anatomy and developmental stages, growth habits, substrates and ecology. Key Results Wood anatomy of Nepenthes is diffuse porous, with mainly solitary vessels showing simple, bordered perforation plates and alternate intervessel pits, fibres with distinctly bordered pits (occasionally septate), apotracheal axial parenchyma and co-occurring uni- and multiseriate rays often including silica bodies. Precipitation and growth habit (stem length) are linked with vessel density and multiseriate ray height, while soil type correlates with vessel diameter, vessel element length and maximum ray width. For Caryophyllales as a whole, silica grains, successive cambia and bordered perforation plates are the result of convergent evolution. Peculiar helical sculpturing patterns within various cell types occur uniquely within the insectivorous clade of non-core Caryophyllales. Conclusions The wood anatomical variation in Nepenthes displays variation for some characters dependent on soil type, precipitation and stem

Tracheid development and wood quality in larch seedlings under controlled environment

Treesearch

J.J. Balatinecz; J.L. Farrar

1968-01-01

Several environmental factors necessary for tree growth undergo rhythmic and sometimes abrupt changes during the course of a year, and even during a day. Since wood cells are susceptible to outside influences during their differentiation, certain fluctuations of environmental conditions invariably leave a permanent imprint on xylem anatomy, and hence significantly...

Coleoptera Associated with Decaying Wood in a Tropical Deciduous Forest.

PubMed

Muñoz-López, N Z; Andrés-Hernández, A R; Carrillo-Ruiz, H; Rivas-Arancibia, S P

2016-08-01

Coleoptera is the largest and diverse group of organisms, but few studies are dedicated to determine the diversity and feeding guilds of saproxylic Coleoptera. We demonstrate the diversity, abundance, feeding guilds, and succession process of Coleoptera associated with decaying wood in a tropical deciduous forest in the Mixteca Poblana, Mexico. Decaying wood was sampled and classified into four stages of decay, and the associated Coleoptera. The wood was identified according to their anatomy. Diversity was estimated using the Simpson index, while abundance was estimated using a Kruskal-Wallis test; the association of Coleoptera with wood species and decay was assessed using canonical correspondence analysis. Decay wood stage I is the most abundant (51%), followed by stage III (21%). We collected 93 Coleoptera belonging to 14 families, 41 genera, and 44 species. The family Cerambycidae was the most abundant, with 29% of individuals, followed by Tenebrionidae with 27% and Carabidae with 13%. We recognized six feeding guilds. The greatest diversity of Coleoptera was recorded in decaying Acacia farnesiana and Bursera linanoe. Kruskal-Wallis analysis indicated that the abundance of Coleoptera varied according to the species and stage of decay of the wood. The canonical analysis showed that the species and stage of decay of wood determined the composition and community structure of Coleoptera.

Biophysical modelling of intra-ring variations in tracheid features and wood density of Pinus pinaster trees exposed to seasonal droughts.

PubMed

Wilkinson, Sarah; Ogée, Jérôme; Domec, Jean-Christophe; Rayment, Mark; Wingate, Lisa

2015-03-01

Process-based models that link seasonally varying environmental signals to morphological features within tree rings are essential tools to predict tree growth response and commercially important wood quality traits under future climate scenarios. This study evaluated model portrayal of radial growth and wood anatomy observations within a mature maritime pine (Pinus pinaster (L.) Aït.) stand exposed to seasonal droughts. Intra-annual variations in tracheid anatomy and wood density were identified through image analysis and X-ray densitometry on stem cores covering the growth period 1999-2010. A cambial growth model was integrated with modelled plant water status and sugar availability from the soil-plant-atmosphere transfer model MuSICA to generate estimates of cell number, cell volume, cell mass and wood density on a weekly time step. The model successfully predicted inter-annual variations in cell number, ring width and maximum wood density. The model was also able to predict the occurrence of special anatomical features such as intra-annual density fluctuations (IADFs) in growth rings. Since cell wall thickness remained surprisingly constant within and between growth rings, variations in wood density were primarily the result of variations in lumen diameter, both in the model and anatomical data. In the model, changes in plant water status were identified as the main driver of the IADFs through a direct effect on cell volume. The anatomy data also revealed that a trade-off existed between hydraulic safety and hydraulic efficiency. Although a simplified description of cambial physiology is presented, this integrated modelling approach shows potential value for identifying universal patterns of tree-ring growth and anatomical features over a broad climatic gradient. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Force of habit: shrubs, trees and contingent evolution of wood anatomical diversity using Croton (Euphorbiaceae) as a model system

PubMed Central

van Ee, Benjamin W.; Riina, Ricarda; Berry, Paul E.; Wiedenhoeft, Alex C.

2017-01-01

Abstract Background and Aims Wood is a major innovation of land plants, and is usually a central component of the body plan for two major plant habits: shrubs and trees. Wood anatomical syndromes vary between shrubs and trees, but no prior work has explicitly evaluated the contingent evolution of wood anatomical diversity in the context of these plant habits. Methods Phylogenetic comparative methods were used to test for contingent evolution of habit, habitat and wood anatomy in the mega-diverse genus Croton (Euphorbiaceae), across the largest and most complete molecular phylogeny of the genus to date. Key Results Plant habit and habitat are highly correlated, but most wood anatomical features correlate more strongly with habit. The ancestral Croton was reconstructed as a tree, the wood of which is inferred to have absent or indistinct growth rings, confluent-like axial parenchyma, procumbent ray cells and disjunctive ray parenchyma cell walls. The taxa sampled showed multiple independent origins of the shrub habit in Croton, and this habit shift is contingent on several wood anatomical features (e.g. similar vessel-ray pits, thick fibre walls, perforated ray cells). The only wood anatomical trait correlated with habitat and not habit was the presence of helical thickenings in the vessel elements of mesic Croton. Conclusions Plant functional traits, individually or in suites, are responses to multiple and often confounding contexts in evolution. By establishing an explicit contingent evolutionary framework, the interplay between habit, habitat and wood anatomical diversity was dissected in the genus Croton. Both habit and habitat influence the evolution of wood anatomical characters, and conversely, the wood anatomy of lineages can affect shifts in plant habit and habitat. This study hypothesizes novel putatively functional trait associations in woody plant structure that could be further tested in a variety of other taxa. PMID:28065919

Sinus Anatomy

MedlinePlus

... ARS HOME ANATOMY Nasal Anatomy Sinus Anatomy Nasal Physiology Nasal Endoscopy Skull Base Anatomy Virtual Anatomy Disclosure ... ANATOMY > Sinus Anatomy Nasal Anatomy Sinus Anatomy Nasal Physiology Nasal Endoscopy Skull Base Anatomy Virtual Anatomy Disclosure ...

Charcoal anatomy of Brazilian species. I. Anacardiaceae.

PubMed

Gonçalves, Thaís A P; Scheel-Ybert, Rita

2016-01-01

Anthracological studies are firmly advancing in the tropics during the last decades. The theoretical and methodological bases of the discipline are well established. Yet, there is a strong demand for comparative reference material, seeking for an improvement in the precision of taxonomic determination, both in palaeoecological and palaeoethnobotanical studies and to help preventing illegal charcoal production. This work presents descriptions of charcoal anatomy of eleven Anacardiaceae species from six genera native to Brazil (Anacardium occidentale, Anacardium parvifolium, Astronium graveolens, Astronium lecointei, Lithrea molleoides, Schinus terebenthifolius, Spondias mombin, Spondias purpurea, Spondias tuberosa, Tapirira guianensis, and Tapirira obtusa). They are characterized by diffuse-porous wood, vessels solitary and in multiples, tyloses and spiral thickenings sometimes present; simple perforation plates, alternate intervessel pits, rounded vessel-ray pits with much reduced borders to apparently simple; parenchyma paratracheal scanty to vasicentric; heterocellular rays, some with radial canals and crystals; septate fibres with simple pits. These results are quite similar to previous wood anatomical descriptions of the same species or genera. Yet, charcoal identification is more effective when unknown samples are compared to charred extant equivalents, instead of to wood slides.

Interprofessional Anatomy Education in the United Kingdom and Ireland: Perspectives from Students and Teachers

ERIC Educational Resources Information Center

Smith, Claire F.; Hall, Samuel; Border, Scott; Adds, Philip J.; Finn, Gabrielle M.

2015-01-01

There is increasing recognition of multiprofessional learning in anatomy and its role in medical and healthcare professions. This study utilized two components to investigate anatomy interprofessional education (AIPE) in the United Kingdom and Ireland. First, a survey involving qualitative and quantitative components asked Heads of Anatomy to…

Stem wood properties of Populus tremuloides, Betula papyrifera and Acer saccharum saplings after three years of treatments to elevated carbon dioxide and ozone

Treesearch

Seija Kaakinen; Katri Kostiainen; Fredrik Ek; Pekka Saranpaa; Mark E. Kubiske; Jaak Sober; David F. Karnosky; Elina Vapaavuori

2004-01-01

The aim of this study was to examine the effects of elevated carbon dioxide [CO2] and ozone [O3] and their interaction on wood chemistry and anatomy of five clones of 3-year-old trembling aspen (Populus tremuloides Michx.). Wood chemistry was studied also on paper birch (Betula papyrifera...

Integrated control of wood destroying basidiomycetes combining Cu-based wood preservatives and Trichoderma spp.

PubMed Central

2017-01-01

The production of new generation of wood preservatives (without addition of a co-biocide) in combination with an exchange of wood poles on identical sites with high fungal inoculum, has resulted in an increase of premature failures of wood utility poles in the last decades. Wood destroying basidiomycetes inhabiting sites where poles have been installed, have developed resistance against wood preservatives. The objective of the in vitro studies was to identify a Trichoderma spp. with a highly antagonistic potential against wood destroying basidiomycetes that is capable of colonizing Cu-rich environments. For this purpose, the activity of five Trichoderma spp. on Cu-rich medium was evaluated according to its growth and sporulation rates. The influence of the selected Trichoderma spp. on wood colonization and degradation by five wood destroying basidiomycetes was quantitatively analyzed by means of dry weight loss of wood specimens. Furthermore, the preventative effect of the selected Trichoderma spp. in combination with four Cu-based preservatives was also examined by mass loss and histological changes in the wood specimens. Trichoderma harzianum (T-720) was considered the biocontrol agent with higher antagonistic potential to colonize Cu-rich environments (up to 0.1% CuSO4 amended medium). T. harzianum demonstrated significant preventative effect on wood specimens against four wood destroying basidiomycetes. The combined effect of T. harzianum and Cu-based wood preservatives demonstrated that after 9 months incubation with two wood destroying basidiomycetes, wood specimens treated with 3.8 kg m-3 copper-chromium had weight losses between 55–65%, whereas containers previously treated with T. harzianum had significantly lower weight losses (0–25%). Histological studies on one of the wood destroying basidiomycetes revealed typical decomposition of wood cells by brown-rot fungi in Cu-impregnated samples, that were notably absent in wood specimens previously exposed

Integrated control of wood destroying basidiomycetes combining Cu-based wood preservatives and Trichoderma spp.

PubMed

Ribera, Javier; Fink, Siegfried; Bas, Maria Del Carmen; Schwarze, Francis W M R

2017-01-01

The production of new generation of wood preservatives (without addition of a co-biocide) in combination with an exchange of wood poles on identical sites with high fungal inoculum, has resulted in an increase of premature failures of wood utility poles in the last decades. Wood destroying basidiomycetes inhabiting sites where poles have been installed, have developed resistance against wood preservatives. The objective of the in vitro studies was to identify a Trichoderma spp. with a highly antagonistic potential against wood destroying basidiomycetes that is capable of colonizing Cu-rich environments. For this purpose, the activity of five Trichoderma spp. on Cu-rich medium was evaluated according to its growth and sporulation rates. The influence of the selected Trichoderma spp. on wood colonization and degradation by five wood destroying basidiomycetes was quantitatively analyzed by means of dry weight loss of wood specimens. Furthermore, the preventative effect of the selected Trichoderma spp. in combination with four Cu-based preservatives was also examined by mass loss and histological changes in the wood specimens. Trichoderma harzianum (T-720) was considered the biocontrol agent with higher antagonistic potential to colonize Cu-rich environments (up to 0.1% CuSO4 amended medium). T. harzianum demonstrated significant preventative effect on wood specimens against four wood destroying basidiomycetes. The combined effect of T. harzianum and Cu-based wood preservatives demonstrated that after 9 months incubation with two wood destroying basidiomycetes, wood specimens treated with 3.8 kg m-3 copper-chromium had weight losses between 55-65%, whereas containers previously treated with T. harzianum had significantly lower weight losses (0-25%). Histological studies on one of the wood destroying basidiomycetes revealed typical decomposition of wood cells by brown-rot fungi in Cu-impregnated samples, that were notably absent in wood specimens previously exposed to T

Electrochemical corrosion testing of fasteners in extracts of treated wood

Treesearch

Samuel L. Zelinka; Douglas R. Rammer; Donald S. Stone

2008-01-01

A recent change in wood preservatives has highlighted the need for a rapid, quantitative test to measure the corrosion rates of metals in contact with treated wood that could be used to evaluate new fasteners or new wood preservatives. A new method was developed where polarisation resistance tests were conducted on fasteners exposed to a water extract of wood treated...

Evolution of wood anatomical characters in Nepenthes and close relatives of Caryophyllales.

PubMed

Schwallier, Rachel; Gravendeel, Barbara; de Boer, Hugo; Nylinder, Stephan; van Heuven, Bertie Joan; Sieder, Anton; Sumail, Sukaibin; van Vugt, Rogier; Lens, Frederic

2017-05-01

Nepenthes attracts wide attention with its spectacularly shaped carnivorous pitchers, cultural value and horticultural curiosity. Despite the plant's iconic fascination, surprisingly little anatomical detail is known about the genus beyond its modified leaf tip traps. Here, the wood anatomical diversity of Nepenthes is explored. This diversity is further assessed with a phylogenetic framework to investigate whether the wood characters within the genus are relevant from an evolutionary or ecological perspective, or rather depend on differences in developmental stages, growth habits, substrates or precipitation. Observations were performed using light microscopy and scanning electron microscopy. Ancestral states of selected wood and pith characters were reconstructed using an existing molecular phylogeny for Nepenthes and a broader Caryophyllales framework. Pairwise comparisons were assessed for possible relationships between wood anatomy and developmental stages, growth habits, substrates and ecology. Wood anatomy of Nepenthes is diffuse porous, with mainly solitary vessels showing simple, bordered perforation plates and alternate intervessel pits, fibres with distinctly bordered pits (occasionally septate), apotracheal axial parenchyma and co-occurring uni- and multiseriate rays often including silica bodies. Precipitation and growth habit (stem length) are linked with vessel density and multiseriate ray height, while soil type correlates with vessel diameter, vessel element length and maximum ray width. For Caryophyllales as a whole, silica grains, successive cambia and bordered perforation plates are the result of convergent evolution. Peculiar helical sculpturing patterns within various cell types occur uniquely within the insectivorous clade of non-core Caryophyllales. The wood anatomical variation in Nepenthes displays variation for some characters dependent on soil type, precipitation and stem length, but is largely conservative. The helical-banded fibre

Current issues with standards in the measurement and documentation of human skeletal anatomy.

PubMed

Magee, Justin; McClelland, Brian; Winder, John

2012-09-01

Digital modeling of human anatomy has become increasingly important and relies on well-documented quantitative anatomy literature. This type of documentation is common for the spine and pelvis; however, significant issues exist due to the lack of standardization in measurement and technique. Existing literature on quantitative anatomy for the spine and pelvis of white adults (aged 18-65 years, separated into decadal categories) was reviewed from the disciplines of anatomy, manipulative therapy, anthropometrics, occupational ergonomics, biomechanics and forensic science. The data were unified into a single normative model of the sub-axial spine. Two-dimensional orthographic drawings were produced from the 590 individual measurements identified, which informed the development of a 3D digital model. A similar review of full range of motion data was conducted as a meta-analysis and the results were applied to the existing model, providing an inter-connected, articulated digital spine. During these data analysis processes several inconsistencies were observed accompanied by an evidential lack of standardization with measurement and recording of data. These have been categorized as: anatomical terminology; scaling of measurements; measurement methodology, dimension and anatomical reference positions; global coordinate systems. There is inconsistency in anatomical terminology where independent researchers use the same terms to describe different aspects of anatomy or different terms for the same anatomy. Published standards exist for measurement methods of the human body regarding spatial interaction, anthropometric databases, automotive applications, clothing industries and for computer manikins, but none exists for skeletal anatomy. Presentation of measurements often lacks formal structure in clinical publications, seldom providing geometric reference points, therefore making digital reconstruction difficult. Published quantitative data does not follow existing

Force of habit: shrubs, trees and contingent evolution of wood anatomical diversity using Croton (Euphorbiaceae) as a model system.

PubMed

Arévalo, Rafael; van Ee, Benjamin W; Riina, Ricarda; Berry, Paul E; Wiedenhoeft, Alex C

2017-03-01

Wood is a major innovation of land plants, and is usually a central component of the body plan for two major plant habits: shrubs and trees. Wood anatomical syndromes vary between shrubs and trees, but no prior work has explicitly evaluated the contingent evolution of wood anatomical diversity in the context of these plant habits. Phylogenetic comparative methods were used to test for contingent evolution of habit, habitat and wood anatomy in the mega-diverse genus Croton (Euphorbiaceae), across the largest and most complete molecular phylogeny of the genus to date. Plant habit and habitat are highly correlated, but most wood anatomical features correlate more strongly with habit. The ancestral Croton was reconstructed as a tree, the wood of which is inferred to have absent or indistinct growth rings, confluent-like axial parenchyma, procumbent ray cells and disjunctive ray parenchyma cell walls. The taxa sampled showed multiple independent origins of the shrub habit in Croton , and this habit shift is contingent on several wood anatomical features (e.g. similar vessel-ray pits, thick fibre walls, perforated ray cells). The only wood anatomical trait correlated with habitat and not habit was the presence of helical thickenings in the vessel elements of mesic Croton . Plant functional traits, individually or in suites, are responses to multiple and often confounding contexts in evolution. By establishing an explicit contingent evolutionary framework, the interplay between habit, habitat and wood anatomical diversity was dissected in the genus Croton . Both habit and habitat influence the evolution of wood anatomical characters, and conversely, the wood anatomy of lineages can affect shifts in plant habit and habitat. This study hypothesizes novel putatively functional trait associations in woody plant structure that could be further tested in a variety of other taxa. Published by Oxford University Press on behalf of the Annals of Botany Company 2017. This work is

Comparison of a gross anatomy laboratory to online anatomy software for teaching anatomy.

PubMed

Mathiowetz, Virgil; Yu, Chih-Huang; Quake-Rapp, Cindee

2016-01-01

This study was designed to assess the grades, self-perceived learning, and satisfaction between occupational therapy students who used a gross anatomy laboratory versus online anatomy software (AnatomyTV) as tools to learn anatomy at a large public university and a satellite campus in the mid-western United States. The goal was to determine if equivalent learning outcomes could be achieved regardless of learning tool used. In addition, it was important to determine why students chose the gross anatomy laboratory over online AnatomyTV. A two group, post-test only design was used with data gathered at the end of the course. Primary outcomes were students' grades, self-perceived learning, and satisfaction. In addition, a survey was used to collect descriptive data. One cadaver prosection was available for every four students in the gross anatomy laboratory. AnatomyTV was available online through the university library. At the conclusion of the course, the gross anatomy laboratory group had significantly higher grade percentage, self-perceived learning, and satisfaction than the AnatomyTV group. However, the practical significance of the difference is debatable. The significantly greater time spent in gross anatomy laboratory during the laboratory portion of the course may have affected the study outcomes. In addition, some students may find the difference in (B+) versus (A-) grade as not practically significant. Further research needs to be conducted to identify what specific anatomy teaching resources are most effective beyond prosection for students without access to a gross anatomy laboratory. © 2015 American Association of Anatomists.

Broad Anatomical Variation within a Narrow Wood Density Range--A Study of Twig Wood across 69 Australian Angiosperms.

PubMed

Ziemińska, Kasia; Westoby, Mark; Wright, Ian J

2015-01-01

Just as people with the same weight can have different body builds, woods with the same wood density can have different anatomies. Here, our aim was to assess the magnitude of anatomical variation within a restricted range of wood density and explore its potential ecological implications. Twig wood of 69 angiosperm tree and shrub species was analyzed. Species were selected so that wood density varied within a relatively narrow range (0.38-0.62 g cm-3). Anatomical traits quantified included wood tissue fractions (fibres, axial parenchyma, ray parenchyma, vessels, and conduits with maximum lumen diameter below 15 μm), vessel properties, and pith area. To search for potential ecological correlates of anatomical variation the species were sampled across rainfall and temperature contrasts, and several other ecologically-relevant traits were measured (plant height, leaf area to sapwood area ratio, and modulus of elasticity). Despite the limited range in wood density, substantial anatomical variation was observed. Total parenchyma fraction varied from 0.12 to 0.66 and fibre fraction from 0.20 to 0.74, and these two traits were strongly inversely correlated (r = -0.86, P < 0.001). Parenchyma was weakly (0.24 ≤|r|≤ 0.35, P < 0.05) or not associated with vessel properties nor with height, leaf area to sapwood area ratio, and modulus of elasticity (0.24 ≤|r|≤ 0.41, P < 0.05). However, vessel traits were fairly well correlated with height and leaf area to sapwood area ratio (0.47 ≤|r|≤ 0.65, all P < 0.001). Modulus of elasticity was mainly driven by fibre wall plus vessel wall fraction rather than by the parenchyma component. Overall, there seem to be at least three axes of variation in xylem, substantially independent of each other: a wood density spectrum, a fibre-parenchyma spectrum, and a vessel area spectrum. The fibre-parenchyma spectrum does not yet have any clear or convincing ecological interpretation.

Broad Anatomical Variation within a Narrow Wood Density Range—A Study of Twig Wood across 69 Australian Angiosperms

PubMed Central

Ziemińska, Kasia; Westoby, Mark; Wright, Ian J.

2015-01-01

Objectives Just as people with the same weight can have different body builds, woods with the same wood density can have different anatomies. Here, our aim was to assess the magnitude of anatomical variation within a restricted range of wood density and explore its potential ecological implications. Methods Twig wood of 69 angiosperm tree and shrub species was analyzed. Species were selected so that wood density varied within a relatively narrow range (0.38–0.62 g cm-3). Anatomical traits quantified included wood tissue fractions (fibres, axial parenchyma, ray parenchyma, vessels, and conduits with maximum lumen diameter below 15 μm), vessel properties, and pith area. To search for potential ecological correlates of anatomical variation the species were sampled across rainfall and temperature contrasts, and several other ecologically-relevant traits were measured (plant height, leaf area to sapwood area ratio, and modulus of elasticity). Results Despite the limited range in wood density, substantial anatomical variation was observed. Total parenchyma fraction varied from 0.12 to 0.66 and fibre fraction from 0.20 to 0.74, and these two traits were strongly inversely correlated (r = -0.86, P < 0.001). Parenchyma was weakly (0.24 ≤|r|≤ 0.35, P < 0.05) or not associated with vessel properties nor with height, leaf area to sapwood area ratio, and modulus of elasticity (0.24 ≤|r|≤ 0.41, P < 0.05). However, vessel traits were fairly well correlated with height and leaf area to sapwood area ratio (0.47 ≤|r|≤ 0.65, all P < 0.001). Modulus of elasticity was mainly driven by fibre wall plus vessel wall fraction rather than by the parenchyma component. Conclusions Overall, there seem to be at least three axes of variation in xylem, substantially independent of each other: a wood density spectrum, a fibre-parenchyma spectrum, and a vessel area spectrum. The fibre-parenchyma spectrum does not yet have any clear or convincing ecological interpretation. PMID

Improving wood properties for wood utilization through multi-omics integration in lignin biosynthesis

DOE PAGES

Wang, Jack P.; Matthews, Megan L.; Williams, Cranos M.; ...

2018-04-20

A multi-omics quantitative integrative analysis of lignin biosynthesis can advance the strategic engineering of wood for timber, pulp, and biofuels. Lignin is polymerized from three monomers (monolignols) produced by a grid-like pathway. The pathway in wood formation of Populus trichocarpa has at least 21 genes, encoding enzymes that mediate 37 reactions on 24 metabolites, leading to lignin and affecting wood properties. We perturb these 21 pathway genes and integrate transcriptomic, proteomic, fluxomic and phenomic data from 221 lines selected from ~2000 transgenics (6-month-old). The integrative analysis estimates how changing expression of pathway gene or gene combination affects protein abundance, metabolic-flux,more » metabolite concentrations, and 25 wood traits, including lignin, tree-growth, density, strength, and saccharification. The analysis then predicts improvements in any of these 25 traits individually or in combinations, through engineering expression of specific monolignol genes. The analysis may lead to greater understanding of other pathways for improved growth and adaptation.« less

Improving wood properties for wood utilization through multi-omics integration in lignin biosynthesis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Jack P.; Matthews, Megan L.; Williams, Cranos M.

A multi-omics quantitative integrative analysis of lignin biosynthesis can advance the strategic engineering of wood for timber, pulp, and biofuels. Lignin is polymerized from three monomers (monolignols) produced by a grid-like pathway. The pathway in wood formation of Populus trichocarpa has at least 21 genes, encoding enzymes that mediate 37 reactions on 24 metabolites, leading to lignin and affecting wood properties. We perturb these 21 pathway genes and integrate transcriptomic, proteomic, fluxomic and phenomic data from 221 lines selected from ~2000 transgenics (6-month-old). The integrative analysis estimates how changing expression of pathway gene or gene combination affects protein abundance, metabolic-flux,more » metabolite concentrations, and 25 wood traits, including lignin, tree-growth, density, strength, and saccharification. The analysis then predicts improvements in any of these 25 traits individually or in combinations, through engineering expression of specific monolignol genes. The analysis may lead to greater understanding of other pathways for improved growth and adaptation.« less

Improving wood properties for wood utilization through multi-omics integration in lignin biosynthesis.

PubMed

Wang, Jack P; Matthews, Megan L; Williams, Cranos M; Shi, Rui; Yang, Chenmin; Tunlaya-Anukit, Sermsawat; Chen, Hsi-Chuan; Li, Quanzi; Liu, Jie; Lin, Chien-Yuan; Naik, Punith; Sun, Ying-Hsuan; Loziuk, Philip L; Yeh, Ting-Feng; Kim, Hoon; Gjersing, Erica; Shollenberger, Todd; Shuford, Christopher M; Song, Jina; Miller, Zachary; Huang, Yung-Yun; Edmunds, Charles W; Liu, Baoguang; Sun, Yi; Lin, Ying-Chung Jimmy; Li, Wei; Chen, Hao; Peszlen, Ilona; Ducoste, Joel J; Ralph, John; Chang, Hou-Min; Muddiman, David C; Davis, Mark F; Smith, Chris; Isik, Fikret; Sederoff, Ronald; Chiang, Vincent L

2018-04-20

A multi-omics quantitative integrative analysis of lignin biosynthesis can advance the strategic engineering of wood for timber, pulp, and biofuels. Lignin is polymerized from three monomers (monolignols) produced by a grid-like pathway. The pathway in wood formation of Populus trichocarpa has at least 21 genes, encoding enzymes that mediate 37 reactions on 24 metabolites, leading to lignin and affecting wood properties. We perturb these 21 pathway genes and integrate transcriptomic, proteomic, fluxomic and phenomic data from 221 lines selected from ~2000 transgenics (6-month-old). The integrative analysis estimates how changing expression of pathway gene or gene combination affects protein abundance, metabolic-flux, metabolite concentrations, and 25 wood traits, including lignin, tree-growth, density, strength, and saccharification. The analysis then predicts improvements in any of these 25 traits individually or in combinations, through engineering expression of specific monolignol genes. The analysis may lead to greater understanding of other pathways for improved growth and adaptation.

Wood anatomy of Pleodendron costaricense (Canellaceae) from Southern Pacific, Costa Rica

Treesearch

Roger Moya Roque; Manuel Morales Salazar; Michael C. Wiemann; Luis Poveda Alvarez

2007-01-01

Pleodendron costaricense N. Zamora, Hammel & R. Aguilar (Canellaceae) is an endemic species from the southern Pacific region of Costa Rica. It is rare and is considered to be a living fossil. The wood of P. costaricense has high density (0.92 Kg/cm3, air dry) with little distinction between heartwood and sapwood. The growth rings are marked...

Wood-adhesive bonding failure : modeling and simulation

Treesearch

Zhiyong Cai

2010-01-01

The mechanism of wood bonding failure when exposed to wet conditions or wet/dry cycles is not fully understood and the role of the resulting internal stresses exerted upon the wood-adhesive bondline has yet to be quantitatively determined. Unlike previous modeling this study has developed a new two-dimensional internal-stress model on the basis of the mechanics of...

Current issues with standards in the measurement and documentation of human skeletal anatomy

PubMed Central

Magee, Justin; McClelland, Brian; Winder, John

2012-01-01

Digital modeling of human anatomy has become increasingly important and relies on well-documented quantitative anatomy literature. This type of documentation is common for the spine and pelvis; however, significant issues exist due to the lack of standardization in measurement and technique. Existing literature on quantitative anatomy for the spine and pelvis of white adults (aged 18–65 years, separated into decadal categories) was reviewed from the disciplines of anatomy, manipulative therapy, anthropometrics, occupational ergonomics, biomechanics and forensic science. The data were unified into a single normative model of the sub-axial spine. Two-dimensional orthographic drawings were produced from the 590 individual measurements identified, which informed the development of a 3D digital model. A similar review of full range of motion data was conducted as a meta-analysis and the results were applied to the existing model, providing an inter-connected, articulated digital spine. During these data analysis processes several inconsistencies were observed accompanied by an evidential lack of standardization with measurement and recording of data. These have been categorized as: anatomical terminology; scaling of measurements; measurement methodology, dimension and anatomical reference positions; global coordinate systems. There is inconsistency in anatomical terminology where independent researchers use the same terms to describe different aspects of anatomy or different terms for the same anatomy. Published standards exist for measurement methods of the human body regarding spatial interaction, anthropometric databases, automotive applications, clothing industries and for computer manikins, but none exists for skeletal anatomy. Presentation of measurements often lacks formal structure in clinical publications, seldom providing geometric reference points, therefore making digital reconstruction difficult. Published quantitative data does not follow existing

Comparison of a Gross Anatomy Laboratory to Online Anatomy Software for Teaching Anatomy

ERIC Educational Resources Information Center

Mathiowetz, Virgil; Yu, Chih-Huang; Quake-Rapp, Cindee

2016-01-01

This study was designed to assess the grades, self-perceived learning, and satisfaction between occupational therapy students who used a gross anatomy laboratory versus online anatomy software (AnatomyTV) as tools to learn anatomy at a large public university and a satellite campus in the mid-western United States. The goal was to determine if…

46 CFR 148.325 - Wood chips; wood pellets; wood pulp pellets.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Wood chips; wood pellets; wood pulp pellets. 148.325... § 148.325 Wood chips; wood pellets; wood pulp pellets. (a) This part applies to wood chips and wood pulp... cargo hold. (b) No person may enter a cargo hold containing wood chips, wood pellets, or wood pulp...

46 CFR 148.325 - Wood chips; wood pellets; wood pulp pellets.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 5 2012-10-01 2012-10-01 false Wood chips; wood pellets; wood pulp pellets. 148.325... § 148.325 Wood chips; wood pellets; wood pulp pellets. (a) This part applies to wood chips and wood pulp... cargo hold. (b) No person may enter a cargo hold containing wood chips, wood pellets, or wood pulp...

46 CFR 148.325 - Wood chips; wood pellets; wood pulp pellets.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 5 2013-10-01 2013-10-01 false Wood chips; wood pellets; wood pulp pellets. 148.325... § 148.325 Wood chips; wood pellets; wood pulp pellets. (a) This part applies to wood chips and wood pulp... cargo hold. (b) No person may enter a cargo hold containing wood chips, wood pellets, or wood pulp...

46 CFR 148.325 - Wood chips; wood pellets; wood pulp pellets.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 5 2011-10-01 2011-10-01 false Wood chips; wood pellets; wood pulp pellets. 148.325... § 148.325 Wood chips; wood pellets; wood pulp pellets. (a) This part applies to wood chips and wood pulp... cargo hold. (b) No person may enter a cargo hold containing wood chips, wood pellets, or wood pulp...

Wood anatomical correlates with theoretical conductivity and wood density across China: evolutionary evidence of the functional differentiation of axial and radial parenchyma

PubMed Central

Zheng, Jingming; Martínez-Cabrera, Hugo I.

2013-01-01

Background and Aims In recent years considerable effort has focused on linking wood anatomy and key ecological traits. Studies analysing large databases have described how these ecological traits vary as a function of wood anatomical traits related to conduction and support, but have not considered how these functions interact with cells involved in storage of water and carbohydrates (i.e. parenchyma cells). Methods We analyzed, in a phylogenetic context, the functional relationship between cell types performing each of the three xylem functions (conduction, support and storage) and wood density and theoretical conductivity using a sample of approx. 800 tree species from China. Key Results Axial parenchyma and rays had distinct evolutionary correlation patterns. An evolutionary link was found between high conduction capacity and larger amounts of axial parenchyma that is probably related to water storage capacity and embolism repair, while larger amounts of ray tissue have evolved with increased mechanical support and reduced hydraulic capacity. In a phylogenetic principal component analysis this association of axial parenchyma with increased conduction capacity and rays with wood density represented orthogonal axes of variation. In multivariate space, however, the proportion of rays might be positively associated with conductance and negatively with wood density, indicating flexibility in these axes in species with wide rays. Conclusions The findings suggest that parenchyma types may differ in function. The functional axes represented by different cell types were conserved across lineages, suggesting a significant role in the ecological strategies of the angiosperms. PMID:23904446

An extension of the plant ontology project supporting wood anatomy and development research

Treesearch

Federic Lens; Laurel Cooper; Maria Alejandra Gandolfo; Andrew Groover; Pankaj Jaiswal; Barbara Lachenbruch; Rachel Spicer; Margaret E. Staton; Dennis W. Stevenson; Ramona L. Walls; Jill Wegrzyn

2012-01-01

A wealth of information on plant anatomy and morphology is available in the current and historical literature, and molecular biologists are producing massive amounts of transcriptome and genome data that can be used to gain better insights into the development, evolution, ecology, and physiological function of plant anatomical attributes. Integrating anatomical and...

An improved FSL-FIRST pipeline for subcortical gray matter segmentation to study abnormal brain anatomy using quantitative susceptibility mapping (QSM).

PubMed

Feng, Xiang; Deistung, Andreas; Dwyer, Michael G; Hagemeier, Jesper; Polak, Paul; Lebenberg, Jessica; Frouin, Frédérique; Zivadinov, Robert; Reichenbach, Jürgen R; Schweser, Ferdinand

2017-06-01

Accurate and robust segmentation of subcortical gray matter (SGM) nuclei is required in many neuroimaging applications. FMRIB's Integrated Registration and Segmentation Tool (FIRST) is one of the most popular software tools for automated subcortical segmentation based on T 1 -weighted (T1w) images. In this work, we demonstrate that FIRST tends to produce inaccurate SGM segmentation results in the case of abnormal brain anatomy, such as present in atrophied brains, due to a poor spatial match of the subcortical structures with the training data in the MNI space as well as due to insufficient contrast of SGM structures on T1w images. Consequently, such deviations from the average brain anatomy may introduce analysis bias in clinical studies, which may not always be obvious and potentially remain unidentified. To improve the segmentation of subcortical nuclei, we propose to use FIRST in combination with a special Hybrid image Contrast (HC) and Non-Linear (nl) registration module (HC-nlFIRST), where the hybrid image contrast is derived from T1w images and magnetic susceptibility maps to create subcortical contrast that is similar to that in the Montreal Neurological Institute (MNI) template. In our approach, a nonlinear registration replaces FIRST's default linear registration, yielding a more accurate alignment of the input data to the MNI template. We evaluated our method on 82 subjects with particularly abnormal brain anatomy, selected from a database of >2000 clinical cases. Qualitative and quantitative analyses revealed that HC-nlFIRST provides improved segmentation compared to the default FIRST method. Copyright © 2017 Elsevier Inc. All rights reserved.

Impregnation of Scots pine and beech with tannin solutions: effect of viscosity and wood anatomy in wood infiltration.

PubMed

Tondi, G; Thevenon, M F; Mies, B; Standfest, G; Petutschnigg, A; Wieland, S

The impregnation process of Scots pine and beech samples with tannin solutions was investigated. The two materials involved in the process (impregnation solution and wood samples) are studied in depth. Viscosity of mimosa tannin solutions and the anatomical aspect of beech and Scots pine were analysed and correlated. The viscosity of tannin solutions presents a non-newtonian behaviour when its pH level increases, and in the case of addition of hexamine as a hardener, the crosslinking of the flavonoids turns out to be of great importance. During the impregnation of Scots pine ( Pinus sylvestris L.) and beech ( Fagus sylvatica L.), the liquid and solid uptakes were monitored while taking into consideration the different conditions of the impregnation process. This method allowed to identify the best conditions needed in order to get a successful preservative uptake for each wooden substrate. The penetration mechanism within the wood of both species was revealed with the aid of a microscopic analysis. Scots pine is impregnated through the tracheids in the longitudinal direction and through parenchyma rays in the radial direction, whereas in beech, the penetration occurs almost completely through longitudinal vessels.

Designing Anatomy Program in Modern Medical Curriculum: Matter of Balance

PubMed Central

Grković, Ivica; Marinović Guić, Maja; Košta, Vana; Poljičanin, Ana; Čarić, Ana; Vilović, Katarina

2009-01-01

Aim To evaluate the structure of the anatomy program in the first year medical curriculum of University of Split School of Medicine by comparing it with the recommendations by the Educational Affairs Committee of the American Association of Clinical Anatomists (AACA) and the Terminologia Anatomica (TA); we also quantitatively evaluated the organization of teaching material in contemporary topographical anatomy textbooks and matched them with the AACA recommendations, TA, and the curriculum of the anatomy course taught at Medical School in Split, Croatia. Methods TA, official recommendations of the AACA, 6 contemporary anatomy textbooks, and the structure of the anatomy course were analyzed for the proportion of the terms or text devoted to standard topographical regions of the body. The findings were correlated using Spearman ρ test. Results The curriculum outline correlated both with the AACA recommendations (Spearman ρ = 0.83, P = 0.015) and TA (Spearman ρ = 0.73, P = 0.046). Textbooks contained 8 distinct sections, 7 allocated to topographic anatomy regions and 1 to general anatomy concepts and principles. The structure of all textbooks correlated significantly with the course curriculum. However, 4 out of 6 textbooks did not correlate with TA and only a single textbook showed significant correlation with the AACA recommendations. Conclusion Anatomy textbooks vary in the amount of text dedicated to different parts of topographical anatomy and are not quite concordant with curriculum recommendations and standard anatomical terminology. Planning the structure of an anatomy course should not be based on a single book or recommendation but on evidence. PMID:19260144

Designing anatomy program in modern medical curriculum: matter of balance.

PubMed

Grković, Ivica; Marinović Guić, Maja; Kosta, Vana; Poljicanin, Ana; Carić, Ana; Vilović, Katarina

2009-02-01

To evaluate the structure of the anatomy program in the first year medical curriculum of University of Split School of Medicine by comparing it with the recommendations by the Educational Affairs Committee of the American Association of Clinical Anatomists (AACA) and the Terminologia Anatomica (TA); we also quantitatively evaluated the organization of teaching material in contemporary topographical anatomy textbooks and matched them with the AACA recommendations, TA, and the curriculum of the anatomy course taught at Medical School in Split, Croatia. TA, official recommendations of the AACA, 6 contemporary anatomy textbooks, and the structure of the anatomy course were analyzed for the proportion of the terms or text devoted to standard topographical regions of the body. The findings were correlated using Spearman rho test. The curriculum outline correlated both with the AACA recommendations (Spearman rho=0.83, P=0.015) and TA (Spearman rho=0.73, P=0.046). Textbooks contained 8 distinct sections, 7 allocated to topographic anatomy regions and 1 to general anatomy concepts and principles. The structure of all textbooks correlated significantly with the course curriculum. However, 4 out of 6 textbooks did not correlate with TA and only a single textbook showed significant correlation with the AACA recommendations. Anatomy textbooks vary in the amount of text dedicated to different parts of topographical anatomy and are not quite concordant with curriculum recommendations and standard anatomical terminology. Planning the structure of an anatomy course should not be based on a single book or recommendation but on evidence.

Cellulose and lignin biosynthesis is altered by ozone in wood of hybrid poplar (Populus tremula×alba)

PubMed Central

Richet, Nicolas; Afif, Dany; Huber, Françoise; Pollet, Brigitte; Banvoy, Jacques; El Zein, Rana; Lapierre, Catherine; Dizengremel, Pierre; Perré, Patrick; Cabané, Mireille

2011-01-01

Wood formation in trees is a dynamic process that is strongly affected by environmental factors. However, the impact of ozone on wood is poorly documented. The objective of this study was to assess the effects of ozone on wood formation by focusing on the two major wood components, cellulose and lignin, and analysing any anatomical modifications. Young hybrid poplars (Populus tremula×alba) were cultivated under different ozone concentrations (50, 100, 200, and 300 nl l−1). As upright poplars usually develop tension wood in a non-set pattern, the trees were bent in order to induce tension wood formation on the upper side of the stem and normal or opposite wood on the lower side. Biosynthesis of cellulose and lignin (enzymes and RNA levels), together with cambial growth, decreased in response to ozone exposure. The cellulose to lignin ratio was reduced, suggesting that cellulose biosynthesis was more affected than that of lignin. Tension wood was generally more altered than opposite wood, especially at the anatomical level. Tension wood may be more susceptible to reduced carbon allocation to the stems under ozone exposure. These results suggested a coordinated regulation of cellulose and lignin deposition to sustain mechanical strength under ozone. The modifications of the cellulose to lignin ratio and wood anatomy could allow the tree to maintain radial growth while minimizing carbon cost. PMID:21357770

SND1 Transcription Factor–Directed Quantitative Functional Hierarchical Genetic Regulatory Network in Wood Formation in Populus trichocarpa[C][W

PubMed Central

Lin, Ying-Chung; Li, Wei; Sun, Ying-Hsuan; Kumari, Sapna; Wei, Hairong; Li, Quanzi; Tunlaya-Anukit, Sermsawat; Sederoff, Ronald R.; Chiang, Vincent L.

2013-01-01

Wood is an essential renewable raw material for industrial products and energy. However, knowledge of the genetic regulation of wood formation is limited. We developed a genome-wide high-throughput system for the discovery and validation of specific transcription factor (TF)–directed hierarchical gene regulatory networks (hGRNs) in wood formation. This system depends on a new robust procedure for isolation and transfection of Populus trichocarpa stem differentiating xylem protoplasts. We overexpressed Secondary Wall-Associated NAC Domain 1s (Ptr-SND1-B1), a TF gene affecting wood formation, in these protoplasts and identified differentially expressed genes by RNA sequencing. Direct Ptr-SND1-B1–DNA interactions were then inferred by integration of time-course RNA sequencing data and top-down Graphical Gaussian Modeling–based algorithms. These Ptr-SND1-B1-DNA interactions were verified to function in differentiating xylem by anti-PtrSND1-B1 antibody-based chromatin immunoprecipitation (97% accuracy) and in stable transgenic P. trichocarpa (90% accuracy). In this way, we established a Ptr-SND1-B1–directed quantitative hGRN involving 76 direct targets, including eight TF and 61 enzyme-coding genes previously unidentified as targets. The network can be extended to the third layer from the second-layer TFs by computation or by overexpression of a second-layer TF to identify a new group of direct targets (third layer). This approach would allow the sequential establishment, one two-layered hGRN at a time, of all layers involved in a more comprehensive hGRN. Our approach may be particularly useful to study hGRNs in complex processes in plant species resistant to stable genetic transformation and where mutants are unavailable. PMID:24280390

Fast analysis of wood preservers using laser induced breakdown spectroscopy

NASA Astrophysics Data System (ADS)

Uhl, A.; Loebe, K.; Kreuchwig, L.

2001-06-01

Laser-induced breakdown spectroscopy (LIBS) is used for the investigation of wood preservers in timber and in furniture. Both experiments in laboratory and practical applications in recycling facilities and on a building site prove the new possibilities for the fast detection of harmful agents in wood. A commercial system was developed for mobile laser-plasma-analysis as well as for industrial use in sorting plants. The universal measuring principle in combination with an Echelle optics permits real simultaneous multi-element-analysis in the range of 200-780 nm with a resolution of a few picometers. It enables the user to detect main and trace elements in wood within a few seconds, nearly independent of the matrix, knowing that different kinds of wood show an equal elemental composition. Sample preparation is not required. The quantitative analysis of inorganic wood preservers (containing, e.g. Cu, Cr, B, As, Pb, Hg) has been performed exactly using carbon as reference element. It can be shown that the detection limits for heavy metals in wood are in the ppm-range. Additional information is given concerning the quantitative analysis. Statistical data, e.g. the standard deviation (S.D.), were determined and calibration curves were used for each particular element. A comparison between ICP-AES and LIBS is given using depth profile correction factors regarding the different penetration depths with respect to the different volumes in wood analyzed by both analytical methods.

Chemical yields from low-temperature pyrolysis of CCA-treated wood

Treesearch

Qirong Fu; Dimitris Argyropolous; Lucian Lucia; David Tilotta; Stan Lebow

2009-01-01

Low-temperature pyrolysis offers a feasible option for wood-waste management and the recovery of a variety of useful chemicals. The effect of chromated copper arsenate (CCA) wood preservative on the yield and composition of various pyrolysis products was investigated in the present research. A novel quantitative 31P nuclear magnetic resonance (...

Changes in wood density, wood anatomy and hydraulic properties of the xylem along the root-to-shoot flow path in tropical rainforest trees.

PubMed

Schuldt, Bernhard; Leuschner, Christoph; Brock, Nicolai; Horna, Viviana

2013-02-01

It is generally assumed that the largest vessels are occurring in the roots and that vessel diameters and the related hydraulic conductance in the xylem are decreasing acropetally from roots to leaves. With this study in five tree species of a perhumid tropical rainforest in Sulawesi (Indonesia), we searched for patterns in hydraulic architecture and axial conductivity along the flow path from small-diameter roots through strong roots and the trunk to distal sun-canopy twigs. Wood density differed by not more than 10% across the different flow path positions in a species, and branch and stem wood density were closely related in three of the five species. Other than wood density, the wood anatomical and xylem hydraulic traits varied in dependence on the position along the flow path, but were unrelated to wood density within a tree. In contrast to reports from conifers and certain dicotyledonous species, we found a hump-shaped variation in vessel diameter and sapwood area--specific conductivity along the flow path in all five species with a maximum in the trunk and strong roots and minima in both small roots and twigs; the vessel size depended on the diameter of the organ. This pattern might be an adaptation to the perhumid climate with a low risk of hydraulic failure. Despite a similar mean vessel diameter in small roots and twigs, the two distal organs, hydraulically weighted mean vessel diameters were on average 30% larger in small roots, resulting in ∼ 85% higher empirical and theoretical specific conductivities. Relative vessel lumen area in percent of sapwood area decreased linearly by 70% from roots to twigs, reflecting the increase in sclerenchymatic tissue and tracheids in acropetal direction in the xylem. Vessel size was more closely related to the organ diameter than to the distance along the root-to-shoot flow path. We conclude that (i) the five co-occurring tree species show convergent patterns in their hydraulic architecture despite different growth

Longevity and growth of Acacia tortilis; insights from 14C content and anatomy of wood

PubMed Central

Andersen, Gidske L; Krzywinski, Knut

2007-01-01

Background Acacia tortilis is a keystone species across arid ecosystems in Africa and the Middle East. Yet, its life-history, longevity and growth are poorly known, and consequently ongoing changes in tree populations cannot be managed in an appropriate manner. In other arid areas parenchymatic bands marking growth zones in the wood have made dendrochronological studies possible. The possibilities for using pre- and post-bomb 14C content in wood samples along with the presence of narrow marginal parenchymatic bands in the wood is therefore tested to gain further insight into the age, growth and growth conditions of A. tortilis in the hyper-arid Eastern Desert of Egypt. Results Based on age scenarios and the Gompertz growth equation, the age of trees studied seems to be from 200 up to 650 years. Annual radial growth estimated from calibrated dates based on the post-bomb 14C content of samples is up to 2.4 mm, but varies both spatially and temporally. Parenchymatic bands are not formed regularly. The correlation in band pattern among trees is poor, both among and within sites. Conclusion The post-bomb 14C content of A. tortilis wood gives valuable information on tree growth and is required to assess the age scenario approach applied here. This approach indicates high longevities and slow growth of trees. Special management measures should therefore be taken at sites where the trend in tree population size is negative. The possibilities for dendrochronological studies based on A. tortilis from the Eastern Desert are poor. However, marginal parenchymatic bands can give insight into fine scale variation in growth conditions and the past management of trees. PMID:17573964

Studying global change through investigation of the plastic responses of xylem anatomy in tree rings.

PubMed

Fonti, Patrick; von Arx, Georg; García-González, Ignacio; Eilmann, Britta; Sass-Klaassen, Ute; Gärtner, Holger; Eckstein, Dieter

2010-01-01

Variability in xylem anatomy is of interest to plant scientists because of the role water transport plays in plant performance and survival. Insights into plant adjustments to changing environmental conditions have mainly been obtained through structural and functional comparative studies between taxa or within taxa on contrasting sites or along environmental gradients. Yet, a gap exists regarding the study of hydraulic adjustments in response to environmental changes over the lifetimes of plants. In trees, dated tree-ring series are often exploited to reconstruct dynamics in ecological conditions, and recent work in which wood-anatomical variables have been used in dendrochronology has produced promising results. Environmental signals identified in water-conducting cells carry novel information reflecting changes in regional conditions and are mostly related to short, sub-annual intervals. Although the idea of investigating environmental signals through wood anatomical time series goes back to the 1960s, it is only recently that low-cost computerized image-analysis systems have enabled increased scientific output in this field. We believe that the study of tree-ring anatomy is emerging as a promising approach in tree biology and climate change research, particularly if complemented by physiological and ecological studies. This contribution presents the rationale, the potential, and the methodological challenges of this innovative approach.

[The fate of the wood of the Fabrica of 1543].

PubMed

Chevallier, Jacques; Neidhardt, Jean-Christophe

2014-01-01

Destiny of the wood blocks which have been used for engraving of illustrations of 1543 edition of the Fabrica is really outstanding. Several times lost and found again, they were transported over Europe in a surprising conservation state, for more than four centuries. Made by the famous Venitian wood-cutters, the blocks cross the Alps to join up Basel in Switzerland and Joannes Oporinus, the printer. Felix Platter uses 48 Vesalian wood-blocks for his own treaty in 1583. These blocks reappear in Augsburg in 1706, at the printer Andreas Maschenbauer's; they are found again by Von Wollter from Ingolstadt: they are used to illustrate Leveling's anatomy book in 1781 and 1783. Ingolstadt university and the blocks will be transferred to Landshut because of Napoleon's war, then to Munich in 1826. But in 1892 147 blocks are found again in the library; and are forgotten again. Forty years after, 230 blocks are discovered again! Icones anatomicae represent the last and fabulous edition made in 1934. The Second World War closes this epic with the library fire on July 13th 1944: none of these precious blocks remains today.

Significance of wood extractives for wood bonding.

PubMed

Roffael, Edmone

2016-02-01

Wood contains primary extractives, which are present in all woods, and secondary extractives, which are confined in certain wood species. Extractives in wood play a major role in wood-bonding processes, as they can contribute to or determine the bonding relevant properties of wood such as acidity and wettability. Therefore, extractives play an immanent role in bonding of wood chips and wood fibres with common synthetic adhesives such as urea-formaldehyde-resins (UF-resins) and phenol-formaldehyde-resins (PF-resins). Extractives of high acidity accelerate the curing of acid curing UF-resins and decelerate bonding with alkaline hardening PF-resins. Water-soluble extractives like free sugars are detrimental for bonding of wood with cement. Polyphenolic extractives (tannins) can be used as a binder in the wood-based industry. Additionally, extractives in wood can react with formaldehyde and reduce the formaldehyde emission of wood-based panels. Moreover, some wood extractives are volatile organic compounds (VOC) and insofar also relevant to the emission of VOC from wood and wood-based panels.

The place of surface anatomy in the medical literature and undergraduate anatomy textbooks.

PubMed

Azer, Samy A

2013-01-01

The aims of this review were to examine the place of surface anatomy in the medical literature, particularly the methods and approaches used in teaching surface and living anatomy and assess commonly used anatomy textbooks in regard to their surface anatomy contents. PubMed and MEDLINE databases were searched using the following keywords "surface anatomy," "living anatomy," "teaching surface anatomy," "bony landmarks," "peer examination" and "dermatomes". The percentage of pages covering surface anatomy in each textbook was calculated as well as the number of images covering surface anatomy. Clarity, quality and adequacy of surface anatomy contents was also examined. The search identified 22 research papers addressing methods used in teaching surface anatomy, 31 papers that can help in the improvement of surface anatomy curriculum, and 12 anatomy textbooks. These teaching methods included: body painting, peer volunteer surface anatomy, use of a living anatomy model, real time ultrasound, virtual (visible) human dissector (VHD), full body digital x-ray of cadavers (Lodox(®) Statscan(®) images) combined with palpating landmarks on peers and the cadaver, as well as the use of collaborative, contextual and self-directed learning. Nineteen of these studies were published in the period from 2006 to 2013. The 31 papers covered evidence-based and clinically-applied surface anatomy. The percentage of surface anatomy in textbooks' contents ranged from 0 to 6.2 with an average of 3.4%. The number of medical illustrations on surface anatomy varied from 0 to 135. In conclusion, although there has been a progressive increase in publications addressing methods used in teaching surface anatomy over the last six to seven years, most anatomy textbooks do not provide students with adequate information about surface anatomy. Only three textbooks provided a solid explanation and foundation of understanding surface anatomy. © 2013 American Association of Anatomists.

The use of urban wood waste as an energy resource

NASA Astrophysics Data System (ADS)

Khudyakova, G. I.; Danilova, D. A.; Khasanov, R. R.

2017-06-01

The capabilities use of wood waste in the Ekaterinburg city, generated during the felling of trees and sanitation in the care of green plantations in the streets, parks, squares, forest parks was investigated in this study. In the cities at the moment, all the wood, that is removed from city streets turns into waste completely. Wood waste is brought to the landfill of solid household waste, and moreover sorting and evaluation of the quantitative composition of wood waste is not carried out. Several technical solutions that are used in different countries have been proposed for the energy use of wood waste: heat and electrical energy generation, liquid and solid biofuel production. An estimation of the energy potential of the city wood waste was made, for total and for produced heat and electrical energy based on modern engineering developments. According to our estimates total energy potential of wood waste in the city measure up more 340 thousand GJ per year.

Interactive anatomical teaching: Integrating radiological anatomy within topographic anatomy.

PubMed

Abed Rabbo, F; Garrigues, F; Lefèvre, C; Seizeur, R

2016-03-01

Hours attributed to teaching anatomy have been reduced in medical curricula through out the world. In consequence, changes in anatomical curriculum as well as in teaching methods are becoming necessary. New methods of teaching are being evaluated. We present in the following paper an example of interactive anatomical teaching associating topographic anatomy with ultrasonographic radiological anatomy. The aim was to explicitly show anatomical structures of the knee and the ankle through dissection and ultrasonography. One cadaver was used as an ultrasonographic model and the other was dissected. Anatomy of the knee and ankle articulations was studied through dissection and ultrasonography. The students were able to simultaneously assimilate both anatomical aspects of radiological and topographic anatomy. They found the teaching very helpful and practical. This body of work provides example of a teaching method combining two important aspects of anatomy to help the students understand both aspects simultaneously. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Wood handbook : wood as an engineering material.

Treesearch

Forest Products Laboratory

1999-01-01

Summarizes information on wood as an engineering material. Presents properties of wood and wood-based products of particular concern to the architect and engineer. Includes discussion of designing with wood and wood-based products along with some pertinent uses.

Wood handbook : wood as an engineering material

Treesearch

Robert J. Ross; Forest Products Laboratory USDA Forest Service.

2010-01-01

Summarizes information on wood as an engineering material. Presents properties of wood and wood-based products of particular concern to the architect and engineer. Includes discussion of designing with wood and wood-based products along with some pertinent uses.

Liver anatomy.

PubMed

Abdel-Misih, Sherif R Z; Bloomston, Mark

2010-08-01

Understanding the complexities of the liver has been a long-standing challenge to physicians and anatomists. Significant strides in the understanding of hepatic anatomy have facilitated major progress in liver-directed therapies--surgical interventions, such as transplantation, hepatic resection, hepatic artery infusion pumps, and hepatic ablation, and interventional radiologic procedures, such as transarterial chemoembolization, selective internal radiation therapy, and portal vein embolization. Without understanding hepatic anatomy, such progressive interventions would not be feasible. This article reviews the history, general anatomy, and the classification schemes of liver anatomy and their relevance to liver-directed therapies. Copyright 2010 Elsevier Inc. All rights reserved.

Large wood in the Snowy River estuary, Australia

NASA Astrophysics Data System (ADS)

Hinwood, Jon B.; McLean, Errol J.

2017-02-01

In this paper we report on 8 years of data collection and interpretation of large wood in the Snowy River estuary in southeastern Australia, providing quantitative data on the amount, sources, transport, decay, and geomorphic actions. No prior census data for an estuary is known to the authors despite their environmental and economic importance and the significant differences between a fluvial channel and an estuarine channel. Southeastern Australian estuaries contain a significant quantity of large wood that is derived from many sources, including river flood flows, local bank erosion, and anthropogenic sources. Wind and tide are shown to be as important as river flow in transporting and stranding large wood. Tidal action facilitates trapping of large wood on intertidal bars and shoals; but channels are wider and generally deeper, so log jams are less likely than in rivers. Estuarine large wood contributes to localised scour and accretion and hence to the modification of estuarine habitat, but in the study area it did not have large-scale impacts on the hydraulic gradients nor the geomorphology.

The anatomy of anatomy: a review for its modernization.

PubMed

Sugand, Kapil; Abrahams, Peter; Khurana, Ashish

2010-01-01

Anatomy has historically been a cornerstone in medical education regardless of nation or specialty. Until recently, dissection and didactic lectures were its sole pedagogy. Teaching methodology has been revolutionized with more reliance on models, imaging, simulation, and the Internet to further consolidate and enhance the learning experience. Moreover, modern medical curricula are giving less importance to anatomy education and to the acknowledged value of dissection. Universities have even abandoned dissection completely in favor of user-friendly multimedia, alternative teaching approaches, and newly defined priorities in clinical practice. Anatomy curriculum is undergoing international reformation but the current framework lacks uniformity among institutions. Optimal learning content can be categorized into the following modalities: (1) dissection/prosection, (2) interactive multimedia, (3) procedural anatomy, (4) surface and clinical anatomy, and (5) imaging. The importance of multimodal teaching, with examples suggested in this article, has been widely recognized and assessed. Nevertheless, there are still ongoing limitations in anatomy teaching. Substantial problems consist of diminished allotted dissection time and the number of qualified anatomy instructors, which will eventually deteriorate the quality of education. Alternative resources and strategies are discussed in an attempt to tackle these genuine concerns. The challenges are to reinstate more effective teaching and learning tools while maintaining the beneficial values of orthodox dissection. The UK has a reputable medical education but its quality could be improved by observing international frameworks. The heavy penalty of not concentrating on sufficient anatomy education will inevitably lead to incompetent anatomists and healthcare professionals, leaving patients to face dire repercussions. Copyright 2010 American Association of Anatomists.

Recent advances quantifying the large wood dynamics in river basins: New methods and remaining challenges

NASA Astrophysics Data System (ADS)

Ruiz-Villanueva, Virginia; Piégay, Hervé; Gurnell, Angela A.; Marston, Richard A.; Stoffel, Markus

2016-09-01

Large wood is an important physical component of woodland rivers and significantly influences river morphology. It is also a key component of stream ecosystems. However, large wood is also a source of risk for human activities as it may damage infrastructure, block river channels, and induce flooding. Therefore, the analysis and quantification of large wood and its mobility are crucial for understanding and managing wood in rivers. As the amount of large-wood-related studies by researchers, river managers, and stakeholders increases, documentation of commonly used and newly available techniques and their effectiveness has also become increasingly relevant as well. Important data and knowledge have been obtained from the application of very different approaches and have generated a significant body of valuable information representative of different environments. This review brings a comprehensive qualitative and quantitative summary of recent advances regarding the different processes involved in large wood dynamics in fluvial systems including wood budgeting and wood mechanics. First, some key definitions and concepts are introduced. Second, advances in quantifying large wood dynamics are reviewed; in particular, how measurements and modeling can be combined to integrate our understanding of how large wood moves through and is retained within river systems. Throughout, we present a quantitative and integrated meta-analysis compiled from different studies and geographical regions. Finally, we conclude by highlighting areas of particular research importance and their likely future trajectories, and we consider a particularly underresearched area so as to stress the future challenges for large wood research.

Systematic feasibility analysis of a quantitative elasticity estimation for breast anatomy using supine/prone patient postures.

PubMed

Hasse, Katelyn; Neylon, John; Sheng, Ke; Santhanam, Anand P

2016-03-01

Breast elastography is a critical tool for improving the targeted radiotherapy treatment of breast tumors. Current breast radiotherapy imaging protocols only involve prone and supine CT scans. There is a lack of knowledge on the quantitative accuracy with which breast elasticity can be systematically measured using only prone and supine CT datasets. The purpose of this paper is to describe a quantitative elasticity estimation technique for breast anatomy using only these supine/prone patient postures. Using biomechanical, high-resolution breast geometry obtained from CT scans, a systematic assessment was performed in order to determine the feasibility of this methodology for clinically relevant elasticity distributions. A model-guided inverse analysis approach is presented in this paper. A graphics processing unit (GPU)-based linear elastic biomechanical model was employed as a forward model for the inverse analysis with the breast geometry in a prone position. The elasticity estimation was performed using a gradient-based iterative optimization scheme and a fast-simulated annealing (FSA) algorithm. Numerical studies were conducted to systematically analyze the feasibility of elasticity estimation. For simulating gravity-induced breast deformation, the breast geometry was anchored at its base, resembling the chest-wall/breast tissue interface. Ground-truth elasticity distributions were assigned to the model, representing tumor presence within breast tissue. Model geometry resolution was varied to estimate its influence on convergence of the system. A priori information was approximated and utilized to record the effect on time and accuracy of convergence. The role of the FSA process was also recorded. A novel error metric that combined elasticity and displacement error was used to quantify the systematic feasibility study. For the authors' purposes, convergence was set to be obtained when each voxel of tissue was within 1 mm of ground-truth deformation. The authors

Silicified wood from the Permian and Triassic of Antarctica: Tree rings from polar paleolatitudes

USGS Publications Warehouse

Ryberg, P.E.; Taylor, E.L.

2007-01-01

The mass extinction at the Permian-Triassic boundary produced a floral turnover in Gondwana in which Paleozoic seed ferns belonging to the Glossopteridales were replaced by corystosperm seed ferns and other seed plant groups in the Mesozoic. Secondary growth (wood production) in both plant groups provides information on plant growth in relation to environment in the form of permineralized tree rings. Techniques utilized to analyze extant wood can be used on fossil specimens to better understand the climate from both of these periods. Late Permian and early Middle Triassic tree rings from the Beardmore Glacier area indicate an environment where extensive plant growth occurred at polar latitudes (~80–85°S, Permian; ~75°S, Triassic). A rapid transition to dormancy in both the Permian and Triassic woods suggests a strong influence of the annual light/dark cycle within the Antarctic Circle on ring production. Latewood production in each ring was most likely triggered by the movement of the already low-angled sun below the horizon. The plants which produced the wood have been reconstructed as seasonally deciduous, based on structural and sedimentologic evidence. Although the Late Permian climate has been reconstructed as cold temperate and the Middle Triassic as a greenhouse, these differences are not reflected in tree ring anatomy or wood production in these plant fossils from the central Transantarctic Mountains.

Air quality and composite wood products

Treesearch

Melissa G. D. Baumann

1999-01-01

Research at the USDA Forest Service, Forest Products Laboratory (FPL) is being conducted to identify the compounds emitted from wood products during their manufacture and subsequent use. The FPL researchers are measuring the types and quantities of VOCs that are emitted from particleboard and MDF products to provide quantitative emissions information. This information...

Wood : adhesives

Treesearch

A.H. Conner

2001-01-01

This chapter on wood adhesives includes: 1) Classification of wood adhesives 2) Thermosetting wood adhesives 3) Thermoplastic adhesives, 4) Wood adhesives based on natural sources 5) Nonconventional bonding of wood 6) Wood bonding.

Normal Pancreas Anatomy

MedlinePlus

... hyphen, e.g. -historical Searches are case-insensitive Pancreas Anatomy Add to My Pictures View /Download : Small: ... 1586x1534 View Download Large: 3172x3068 View Download Title: Pancreas Anatomy Description: Anatomy of the pancreas; drawing shows ...

Wood anatomy of the Brazilian species of Swartizia and considerations within the tribe Swartzieae

Treesearch

Veronica Angyalossy-Alfonso

2002-01-01

Fifty-one Brazilian species and varieties of Swartzia Schreber and eight other genera from the tribe Swartzieae were examined. Features with the greatest diagnostic value for the tribe are intervascular pit size, ray width and frequency, storied structure, axial parenchyma strand length, parenchyma band width, and vessel diameter. We analyzed the wood anatomical data...

Quantitative proteomics reveals protein profiles underlying major transitions in aspen wood development.

PubMed

Obudulu, Ogonna; Bygdell, Joakim; Sundberg, Björn; Moritz, Thomas; Hvidsten, Torgeir R; Trygg, Johan; Wingsle, Gunnar

2016-02-18

Wood development is of outstanding interest both to basic research and industry due to the associated cellulose and lignin biomass production. Efforts to elucidate wood formation (which is essential for numerous aspects of both pure and applied plant science) have been made using transcriptomic analyses and/or low-resolution sampling. However, transcriptomic data do not correlate perfectly with levels of expressed proteins due to effects of post-translational modifications and variations in turnover rates. In addition, high-resolution analysis is needed to characterize key transitions. In order to identify protein profiles across the developmental region of wood formation, an in-depth and tissue specific sampling was performed. We examined protein profiles, using an ultra-performance liquid chromatography/quadrupole time of flight mass spectrometry system, in high-resolution tangential sections spanning all wood development zones in Populus tremula from undifferentiated cambium to mature phloem and xylem, including cell expansion and cell death zones. In total, we analyzed 482 sections, 20-160 μm thick, from four 47-year-old trees growing wild in Sweden. We obtained high quality expression profiles for 3,082 proteins exhibiting consistency across the replicates, considering that the trees were growing in an uncontrolled environment. A combination of Principal Component Analysis (PCA), Orthogonal Projections to Latent Structures (OPLS) modeling and an enhanced stepwise linear modeling approach identified several major transitions in global protein expression profiles, pinpointing (for example) locations of the cambial division leading to phloem and xylem cells, and secondary cell wall formation zones. We also identified key proteins and associated pathways underlying these developmental landmarks. For example, many of the lignocellulosic related proteins were upregulated in the expansion to the early developmental xylem zone, and for laccases with a rapid decrease

An improved method and data analysis for ultrasound acoustic emissions and xylem vulnerability in conifer wood.

PubMed

Wolkerstorfer, Silviya V; Rosner, Sabine; Hietz, Peter

2012-10-01

The vulnerability of the xylem to cavitation is an important trait in plant drought resistance and has been quantified by several methods. We present a modified method for the simultaneous measurement of cavitations, recorded as ultrasound acoustic emissions (UAEs), and the water potential, measured with a thermocouple psychrometer, in small samples of conifer wood. Analyzing the amplitude of the individual signals showed that a first phase, during which the mean amplitude increased, was followed by a second phase with distinctly lower signal amplitudes. We provide a method to separate the two groups of signals and show that for many samples plausible vulnerability curves require rejecting late low-energy UAEs. These very likely do not result from cavitations. This method was used to analyze the differences between juvenile wood, and early and late mature wood in Picea abies (L.) Karst. Juvenile earlywood was more resistant to cavitation than mature earlywood or latewood, which we relate to the tracheid anatomy of the samples. Copyright © Physiologia Plantarum 2012.

Efficiency analysis of wood processing industry in China during 2006-2015

NASA Astrophysics Data System (ADS)

Zhang, Kun; Yuan, Baolong; Li, Yanxuan

2018-03-01

The wood processing industry is an important industry which affects the national economy and social development. The data envelopment analysis model (DEA) is a quantitative evaluation method for studying industrial efficiency. In this paper, the wood processing industry of 8 provinces in southern China is taken as the study object, and the efficiency of each province in 2006 to 2015 was measured and calculated with the DEA method, and the efficiency changes, technological changes and Malmquist index were analyzed dynamically. The empirical results show that there is a widening gap in the efficiency of wood processing industry of the 8 provinces, and the technological progress has shown a lag in the promotion of wood processing industry. According to the research conclusion, along with the situation of domestic and foreign wood processing industry development, the government must introduce relevant policies to strengthen the construction of the wood processing industry technology innovation policy system and the industrial coordinated development system.

Five willow varieties cultivated across diverse field environments reveal stem density variation associated with high tension wood abundance

PubMed Central

Berthod, Nicolas; Brereton, Nicholas J. B.; Pitre, Frédéric E.; Labrecque, Michel

2015-01-01

Sustainable and inexpensive production of biomass is necessary to make biofuel production feasible, but represents a challenge. Five short rotation coppice willow cultivars, selected for high biomass yield, were cultivated on sites at four diverse regions of Quebec in contrasting environments. Wood composition and anatomical traits were characterized. Tree height and stem diameter were measured to evaluate growth performance of the cultivars according to the diverse pedoclimatic conditions. Each cultivar showed very specific responses to its environment. While no significant variation in lignin content was observed between sites, there was variation between cultivars. Surprisingly, the pattern of substantial genotype variability in stem density was maintained across all sites. However, wood anatomy did differ between sites in a cultivar (producing high and low density wood), suggesting a probable response to an abiotic stress. Furthermore, twice as many cellulose-rich G-fibers, comprising over 50% of secondary xylem, were also found in the high density wood, a finding with potential to bring higher value to the lignocellulosic bioethanol industry. PMID:26583024

Anisotropy of Wood in the Microwave Region

ERIC Educational Resources Information Center

Ziherl, Sasa; Bajc, Jurij; Urankar, Bernarda; Cepic, Mojca

2010-01-01

Wood is transparent for microwaves and due to its anisotropic structure has anisotropic dielectric properties. A laboratory experiment that allows for the qualitative demonstration and quantitative measurements of linear dichroism and birefringence in the microwave region is presented. As the proposed experiments are based on the anisotropy (of…

[Species identification of the fragment of wood found in the left eye socket bone during exhumation of general Władysław Sikorski's corpse].

PubMed

Wasik, Radosław

2009-01-01

During the exhumation of general Władysław Sikorski's corpse, a fragment of wood was found embedded in the left eye socket bone. The wood fragment was referred by the Institute of Forensic Research to the laboratory of Department of Forest and Wood Utilization, University of Agriculture in Krakow, where investigations were performed, aiming at determining the species of the wood. The fragment was cut into 20 microm thick microtome scraps of three anatomy sections: transverse, tangential and radial. The scraps were immersed in 99.8% ethyl alcohol for 24 hours and then for about 1 hour in xylene. Subsequently, they were placed between a microscope slide and a cover-glass in Canada balsam. The thus prepared scraps were then analyzed with the use of a Jenaval Carl Zeiss microscope. On the basis of microscope observations it was determined that the investigated fragment of wood belonged to Douglas-fir species (Pseudotsuga menziesii (Mirb.) Franco).

A Quantitative Technique for Beginning Microscopists.

ERIC Educational Resources Information Center

Sundberg, Marshall D.

1984-01-01

Stereology is the study of three-dimensional objects through the interpretation of two-dimensional images. Stereological techniques used in introductory botany to quantitatively examine changes in leaf anatomy in response to different environments are discussed. (JN)

Operability score: an innovative tool for quantitative assessment of operability in comparative studies on surgical anatomy.

PubMed

Gagliardi, Filippo; Boari, Nicola; Roberti, Fabio; Caputy, Anthony J; Mortini, Pietro

2014-09-01

Comparative anatomical studies have proved to be invaluable in the evaluation of advantages and drawbacks of single approaches to access established target areas. Approach-related exposed areas do not necessarily represent useful areas when performing surgical manoeuvres. Accordingly the concept of "operability" has recently been introduced as a qualitative assessment of the ability to execute surgical manoeuvres. The authors propose an innovative model for the quantitative assessment of the operability, defined as "operability score" (OS), which can be effectively and easily applied to comparative studies on surgical anatomy. A microanatomical study was conducted on six cadaveric heads. Morphometric measurements were collected and operability scores in selected target points of the surgical field were calculated. As illustrative example, the operability score was applied to the extradural subtemporal transzygomatic approach (ESTZ). The operability score is effective in grading system of surgical operability, and instruments manipulation capability. It is a useful tool to evaluate, in a single approach, areas that can be exposed, and to quantify how those areas are suitable for surgical manoeuvres. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

X-ray computed tomography of wood-adhesive bondlines: Attenuation and phase-contrast effects

DOE PAGES

Paris, Jesse L.; Kamke, Frederick A.; Xiao, Xianghui

2015-07-29

Microscale X-ray computed tomography (XCT) is discussed as a technique for identifying 3D adhesive distribution in wood-adhesive bondlines. Visualization and material segmentation of the adhesives from the surrounding cellular structures require sufficient gray-scale contrast in the reconstructed XCT data. Commercial wood-adhesive polymers have similar chemical characteristics and density to wood cell wall polymers and therefore do not provide good XCT attenuation contrast in their native form. Here, three different adhesive types, namely phenol formaldehyde, polymeric diphenylmethane diisocyanate, and a hybrid polyvinyl acetate, are tagged with iodine such that they yield sufficient X-ray attenuation contrast. However, phase-contrast effects at material edgesmore » complicate image quality and segmentation in XCT data reconstructed with conventional filtered backprojection absorption contrast algorithms. A quantitative phase retrieval algorithm, which isolates and removes the phase-contrast effect, was demonstrated. The paper discusses and illustrates the balance between material X-ray attenuation and phase-contrast effects in all quantitative XCT analyses of wood-adhesive bondlines.« less

X-ray computed tomography of wood-adhesive bondlines: Attenuation and phase-contrast effects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paris, Jesse L.; Kamke, Frederick A.; Xiao, Xianghui

Microscale X-ray computed tomography (XCT) is discussed as a technique for identifying 3D adhesive distribution in wood-adhesive bondlines. Visualization and material segmentation of the adhesives from the surrounding cellular structures require sufficient gray-scale contrast in the reconstructed XCT data. Commercial wood-adhesive polymers have similar chemical characteristics and density to wood cell wall polymers and therefore do not provide good XCT attenuation contrast in their native form. Here, three different adhesive types, namely phenol formaldehyde, polymeric diphenylmethane diisocyanate, and a hybrid polyvinyl acetate, are tagged with iodine such that they yield sufficient X-ray attenuation contrast. However, phase-contrast effects at material edgesmore » complicate image quality and segmentation in XCT data reconstructed with conventional filtered backprojection absorption contrast algorithms. A quantitative phase retrieval algorithm, which isolates and removes the phase-contrast effect, was demonstrated. The paper discusses and illustrates the balance between material X-ray attenuation and phase-contrast effects in all quantitative XCT analyses of wood-adhesive bondlines.« less

The Tunguska event in 1908: evidence from tree-ring anatomy.

PubMed

Vaganov, Evgenii A; Hughes, Malcolm K; Silkin, Pavel P; Nesvetailo, Valery D

2004-01-01

We analyzed tree rings in wood samples collected from some of the few surviving trees found close to the epicenter (within 4-5 km) of the Tunguska event that occurred on the last day of June 1908. Tree-ring growth shows a depression starting in the year after the event and continuing during a 4-5-year period. The most remarkable traces of the event were found in the rings' anatomical structure: (1) formation of "light" rings and a reduction of maximum density in 1908; (2) non-thickened tracheids (the cells that make up most of the wood volume) in the transition and latewood zones (the middle and last-formed parts of the ring, respectively); and (3) deformed tracheids, which are located on the 1908 annual ring outer boundary. In the majority of samples, normal earlywood and latewood tracheids were formed in all annual rings after 1908. The observed anomalies in wood anatomy suggest two main impacts of the Tunguska event on surviving trees--(1) defoliation and (2) direct mechanical stress on active xylem tissue. The mechanical stress needed to fell trees is less than the stress needed to cause the deformation of differentiating tracheids observed in trees close to the epicenter. In order to resolve this apparent contradiction, work is suggested on possible topographic modification of the overpressure experienced by these trees, as is an experimental test of the effects of such stresses on precisely analogous growing trees.

Digital interactive learning of oral radiographic anatomy.

PubMed

Vuchkova, J; Maybury, T; Farah, C S

2012-02-01

Studies reporting high number of diagnostic errors made from radiographs suggest the need to improve the learning of radiographic interpretation in the dental curriculum. Given studies that show student preference for computer-assisted or digital technologies, the purpose of this study was to develop an interactive digital tool and to determine whether it was more successful than a conventional radiology textbook in assisting dental students with the learning of radiographic anatomy. Eighty-eight dental students underwent a learning phase of radiographic anatomy using an interactive digital tool alongside a conventional radiology textbook. The success of the digital tool, when compared to the textbook, was assessed by quantitative means using a radiographic interpretation test and by qualitative means using a structured Likert scale survey, asking students to evaluate their own learning outcomes from the digital tool. Student evaluations of the digital tool showed that almost all participants (95%) indicated that the tool positively enhanced their learning of radiographic anatomy and interpretation. The success of the digital tool in assisting the learning of radiographic interpretation is discussed in the broader context of learning and teaching curricula, and preference (by students) for the use of this digital form when compared to the conventional literate form of the textbook. Whilst traditional textbooks are still valued in the dental curriculum, it is evident that the preference for computer-assisted learning of oral radiographic anatomy enhances the learning experience by enabling students to interact and better engage with the course material. © 2011 John Wiley & Sons A/S.

Anatomy of a field trial: Wood-based biochar and compost influences a Pacific Northwest soil

USDA-ARS?s Scientific Manuscript database

Biochar land application research in elevated rainfall areas (980 millimeters of annual rainfall) of the U.S. Pacific Northwest is lacking. A proof-of-concept field study examined the effects of spruce-pine-fir wood chip biochar (slow pyrolysis; 450-500 degrees Celsius; 35 megagrams per hectare), d...

Facial anatomy.

PubMed

Marur, Tania; Tuna, Yakup; Demirci, Selman

2014-01-01

Dermatologic problems of the face affect both function and aesthetics, which are based on complex anatomical features. Treating dermatologic problems while preserving the aesthetics and functions of the face requires knowledge of normal anatomy. When performing successfully invasive procedures of the face, it is essential to understand its underlying topographic anatomy. This chapter presents the anatomy of the facial musculature and neurovascular structures in a systematic way with some clinically important aspects. We describe the attachments of the mimetic and masticatory muscles and emphasize their functions and nerve supply. We highlight clinically relevant facial topographic anatomy by explaining the course and location of the sensory and motor nerves of the face and facial vasculature with their relations. Additionally, this chapter reviews the recent nomenclature of the branching pattern of the facial artery. © 2013 Elsevier Inc. All rights reserved.

Wood flour

Treesearch

Craig M. Clemons; Daniel F. Caufield

2005-01-01

The term “wood flour” is somewhat ambiguous. Reineke states that the term wood flour “is applied somewhat loosely to wood reduced to finely divided particles approximating those of cereal flours in size, appearance, and texture”. Though its definition is imprecise, the term wood flour is in common use. Practically speaking, wood flour usually refers to wood particles...

Wood flour

Treesearch

Craig M. Clemons

2010-01-01

The term “wood flour” is somewhat ambiguous. Reineke states that the term wood flour “is applied somewhat loosely to wood reduced to finely divided particles approximating those of cereal flours in size, appearance, and texture.” Though its definition is imprecise, the term wood flour is in common use. Practically speaking, wood flour usually refers to wood particles...

Cord Wood Testing in a Non-Catalytic Wood Stove

DOE Office of Scientific and Technical Information (OSTI.GOV)

Butcher, T.; Trojanowski, R.; Wei, G.

EPA Method 28 and the current wood stove regulations have been in-place since 1988. Recently, EPA proposed an update to the existing NSPS for wood stove regulations which includes a plan to transition from the current crib wood fuel to cord wood fuel for certification testing. Cord wood is seen as generally more representative of field conditions while the crib wood is seen as more repeatable. In any change of certification test fuel, there are questions about the impact on measured results and the correlation between tests with the two different fuels. The purpose of the work reported here ismore » to provide data on the performance of a noncatalytic stove with cord wood. The stove selected has previously been certified with crib wood which provides a basis for comparison with cord wood. Overall, particulate emissions were found to be considerably higher with cord wood.« less

SnapAnatomy, a computer-based interactive tool for independent learning of human anatomy.

PubMed

Yip, George W; Rajendran, Kanagasuntheram

2008-06-01

Computer-aided instruction materials are becoming increasing popular in medical education and particularly in the teaching of human anatomy. This paper describes SnapAnatomy, a new interactive program that the authors designed for independent learning of anatomy. SnapAnatomy is primarily tailored for the beginner student to encourage the learning of anatomy by developing a three-dimensional visualization of human structure that is essential to applications in clinical practice and the understanding of function. The program allows the student to take apart and to accurately put together body components in an interactive, self-paced and variable manner to achieve the learning outcome.

Cyclic polyalcohols: fingerprints to identify the botanical origin of natural woods used in wine aging.

PubMed

Alañón, M Elena; Díaz-Maroto, M Consuelo; Díaz-Maroto, Ignacio J; Vila-Lameiro, Pablo; Pérez-Coello, M Soledad

2011-02-23

Cyclic polyalcohol composition of 80 natural wood samples from different botanical species, with the majority of them used in the oenology industry for aging purposes, has been studied by gas chromatography-mass spectrometry (GC-MS) after its conversion into their trimethylsilyloxime derivatives. Each botanical species showed a different and specific cyclic polyalcohol profile. Oak wood samples were characterized by the richness in deoxyinositols, especially proto-quercitol. Meanwhile, other botanical species showed a very low content of cyclic polyalcohols. The qualitative and quantitative study of cyclic polyalcohols was a useful tool to characterize and differentiate woods of different botanical origin to guarantee the authenticity of chips used in the wine-aging process. Monosaccharide composition was also analyzed, showing some quantitative differences among species, but cyclic polyalcohols were the compounds that revealed the main differentiation power.

Fractional flow reserve and coronary bifurcation anatomy: a novel quantitative model to assess and report the stenosis severity of bifurcation lesions.

PubMed

Tu, Shengxian; Echavarria-Pinto, Mauro; von Birgelen, Clemens; Holm, Niels R; Pyxaras, Stylianos A; Kumsars, Indulis; Lam, Ming Kai; Valkenburg, Ilona; Toth, Gabor G; Li, Yingguang; Escaned, Javier; Wijns, William; Reiber, Johan H C

2015-04-20

The aim of this study was to develop a new model for assessment of stenosis severity in a bifurcation lesion including its core. The diagnostic performance of this model, powered by 3-dimensional quantitative coronary angiography to predict the functional significance of obstructive bifurcation stenoses, was evaluated using fractional flow reserve (FFR) as the reference standard. Development of advanced quantitative models might help to establish a relationship between bifurcation anatomy and FFR. Patients who had undergone coronary angiography and interventions in 5 European cardiology centers were randomly selected and analyzed. Different bifurcation fractal laws, including Murray, Finet, and HK laws, were implemented in the bifurcation model, resulting in different degrees of stenosis severity. A total of 78 bifurcation lesions in 73 patients were analyzed. In 51 (65%) bifurcations, FFR was measured in the main vessel. A total of 34 (43.6%) interrogated vessels had an FFR≤0.80. Correlation between FFR and diameter stenosis was poor by conventional straight analysis (ρ=-0.23, p<0.001) but significantly improved by bifurcation analyses: the highest by the HK law (ρ=-0.50, p<0.001), followed by the Finet law (ρ=-0.49, p<0.001), and the Murray law (ρ=-0.41, p<0.001). The area under the receiver-operating characteristics curve for predicting FFR≤0.80 was significantly higher by bifurcation analysis compared with straight analysis: 0.72 (95% confidence interval: 0.61 to 0.82) versus 0.60 (95% confidence interval: 0.49 to 0.71; p=0.001). Applying a threshold of ≥50% diameter stenosis, as assessed by the bifurcation model, to predict FFR≤0.80 resulted in 23 true positives, 27 true negatives, 17 false positives, and 11 false negatives. The new bifurcation model provides a comprehensive assessment of bifurcation anatomy. Compared with straight analysis, identification of lesions with preserved FFR values in obstructive bifurcation stenoses was improved

Anatomy comic strips.

PubMed

Park, Jin Seo; Kim, Dae Hyun; Chung, Min Suk

2011-01-01

Comics are powerful visual messages that convey immediate visceral meaning in ways that conventional texts often cannot. This article's authors created comic strips to teach anatomy more interestingly and effectively. Four-frame comic strips were conceptualized from a set of anatomy-related humorous stories gathered from the authors' collective imagination. The comics were drawn on paper and then recreated with digital graphics software. More than 500 comic strips have been drawn and labeled in Korean language, and some of them have been translated into English. All comic strips can be viewed on the Department of Anatomy homepage at the Ajou University School of Medicine, Suwon, Republic of Korea. The comic strips were written and drawn by experienced anatomists, and responses from viewers have generally been favorable. These anatomy comic strips, designed to help students learn the complexities of anatomy in a straightforward and humorous way, are expected to be improved further by the authors and other interested anatomists. Copyright © 2011 American Association of Anatomists.

Normal Female Reproductive Anatomy

MedlinePlus

... hyphen, e.g. -historical Searches are case-insensitive Reproductive System, Female, Anatomy Add to My Pictures View /Download : ... 1500x1575 View Download Large: 3000x3150 View Download Title: Reproductive System, Female, Anatomy Description: Anatomy of the female reproductive ...

Chapter 6: Wood energy and competing wood product markers

Treesearch

Kenneth E. Skog; Robert C. Abt; Karen Abt

2014-01-01

Understanding the effect of expanding wood energy markets is important to all wood-dependent industries and to policymakers debating the implementation of public programs to support the expansion of wood energy generation. A key factor in determining the feasibility of wood energy projects (e.g. wood boiler or pellet plant) is the long-term (i.e. 20-30year) supply...

Application of automatic image analysis in wood science

Treesearch

Charles W. McMillin

1982-01-01

In this paper I describe an image analysis system and illustrate with examples the application of automatic quantitative measurement to wood science. Automatic image analysis, a powerful and relatively new technology, uses optical, video, electronic, and computer components to rapidly derive information from images with minimal operator interaction. Such instruments...

Wood adhesives : vital for producing most wood products

Treesearch

Charles R. Frihart

2011-01-01

A main route for the efficient utilization of wood resources is to reduce wood to small pieces and then bond them together (Frihart and Hunt 2010). Although humankind has been bonding wood since early Egyptian civilizations, the quality and quantity of bonded wood products has increased dramatically over the past 100 years with the development of new adhesives and...

Factors controlling large-wood transport in a mountain river

NASA Astrophysics Data System (ADS)

Ruiz-Villanueva, Virginia; Wyżga, Bartłomiej; Zawiejska, Joanna; Hajdukiewicz, Maciej; Stoffel, Markus

2016-11-01

As with bedload transport, wood transport in rivers is governed by several factors such as flow regime, geomorphic configuration of the channel and floodplain, or wood size and shape. Because large-wood tends to be transported during floods, safety and logistical constraints make field measurements difficult. As a result, direct observation and measurements of the conditions of wood transport are scarce. This lack of direct observations and the complexity of the processes involved in wood transport may result in an incomplete understanding of wood transport processes. Numerical modelling provides an alternative approach to addressing some of the unknowns in the dynamics of large-wood in rivers. The aim of this study is to improve the understanding of controls governing wood transport in mountain rivers, combining numerical modelling and direct field observations. By defining different scenarios, we illustrate relationships between the rate of wood transport and discharge, wood size, and river morphology. We test these relationships for a wide, multithread reach and a narrower, partially channelized single-thread reach of the Czarny Dunajec River in the Polish Carpathians. Results indicate that a wide range of quantitative information about wood transport can be obtained from a combination of numerical modelling and field observations and from document contrasting patterns of wood transport in single- and multithread river reaches. On the one hand, log diameter seems to have a greater importance for wood transport in the multithread channel because of shallower flow, lower flow velocity, and lower stream power. Hydrodynamic conditions in the single-thread channel allow transport of large-wood pieces, whereas in the multithread reach, logs with diameters similar to water depth are not being moved. On the other hand, log length also exerts strong control on wood transport, more so in the single-thread than in the multithread reach. In any case, wood transport strongly

Infrared thermography for wood density estimation

NASA Astrophysics Data System (ADS)

López, Gamaliel; Basterra, Luis-Alfonso; Acuña, Luis

2018-03-01

Infrared thermography (IRT) is becoming a commonly used technique to non-destructively inspect and evaluate wood structures. Based on the radiation emitted by all objects, this technique enables the remote visualization of the surface temperature without making contact using a thermographic device. The process of transforming radiant energy into temperature depends on many parameters, and interpreting the results is usually complicated. However, some works have analyzed the operation of IRT and expanded its applications, as found in the latest literature. This work analyzes the effect of density on the thermodynamic behavior of timber to be determined by IRT. The cooling of various wood samples has been registered, and a statistical procedure that enables one to quantitatively estimate the density of timber has been designed. This procedure represents a new method to physically characterize this material.

An anatomy precourse enhances student learning in veterinary anatomy.

PubMed

McNulty, Margaret A; Stevens-Sparks, Cathryn; Taboada, Joseph; Daniel, Annie; Lazarus, Michelle D

2016-07-08

Veterinary anatomy is often a source of trepidation for many students. Currently professional veterinary programs, similar to medical curricula, within the United States have no admission requirements for anatomy as a prerequisite course. The purpose of the current study was to evaluate the impact of a week-long precourse in veterinary anatomy on both objective student performance and subjective student perceptions of the precourse educational methods. Incoming first year veterinary students in the Louisiana State University School of Veterinary Medicine professional curriculum were asked to participate in a free precourse before the start of the semester, covering the musculoskeletal structures of the canine thoracic limb. Students learned the material either via dissection only, instructor-led demonstrations only, or a combination of both techniques. Outcome measures included student performance on examinations throughout the first anatomy course of the professional curriculum as compared with those who did not participate in the precourse. This study found that those who participated in the precourse did significantly better on examinations within the professional anatomy course compared with those who did not participate. Notably, this significant improvement was also identified on the examination where both groups were exposed to the material for the first time together, indicating that exposure to a small portion of veterinary anatomy can impact learning of anatomical structures beyond the immediate scope of the material previously learned. Subjective data evaluation indicated that the precourse was well received and students preferred guided learning via demonstrations in addition to dissection as opposed to either method alone. Anat Sci Educ 9: 344-356. © 2015 American Association of Anatomists. © 2015 American Association of Anatomists.

Evaluation of an Innovative Hands-On Anatomy-Centered Ultrasound Curriculum to Supplement Graduate Gross Anatomy Education

ERIC Educational Resources Information Center

Royer, Danielle F.; Kessler, Ross; Stowell, Jeffrey R.

2017-01-01

Ultrasound (US) can enhance anatomy education, yet is incorporated into few non-medical anatomy programs. This study is the first to evaluate the impact of US training in gross anatomy for non-medical students in the United States. All 32 master's students enrolled in gross anatomy with the anatomy-centered ultrasound (ACUS) curriculum were…

Elevated temperature and CO(2) concentration effects on xylem anatomy of Scots pine.

PubMed

Kilpeläinen, Antti; Gerendiain, Ane Zubizarreta; Luostarinen, Katri; Peltola, Heli; Kellomäki, Seppo

2007-09-01

We studied the effects of elevated temperature and carbon dioxide concentration ([CO(2)]) alone and together on wood anatomy of 20-year-old Scots pine (Pinus sylvestris L.) trees. The study was conducted in 16 closed chambers, providing a factorial combination of two temperature regimes and two CO(2) concentrations (ambient and elevated), with four trees in each treatment. The climate scenario included a doubling of [CO(2)] and a corresponding increase of 2-6 degrees C in temperature at the site depending on the season. Anatomical characteristics analyzed were annual earlywood, latewood and ring widths, intra-ring wood densities (earlywood, latewood and mean wood density), tracheid width, length, wall thickness, lumen diameter, wall thickness:lumen diameter ratio and mass per unit length (coarseness), and numbers of rays, resin canals and tracheids per xylem cross-sectional area. Elevated [CO(2)] increased ring width in four of six treatment years; earlywood width increased in the first two years and latewood width in the third year. Tracheid walls in both the earlywood and latewood tended to become thicker over the 6-year treatment period when temperature or [CO(2)] was elevated alone, whereas in the combined treatment they tended to become thinner relative to the tracheids of trees grown under ambient conditions. Latewood tracheid lumen diameters were larger in all the treatments relative to ambient conditions over the 6-year period, whereas lumen diameters in earlywood increased only in response to elevated [CO(2)] and were 3-6% smaller in the treatments with elevated temperature than in ambient conditions. Tracheid width, length and coarseness were greater in trees grown in elevated than in ambient temperature. The number of resin canals per mm(2) decreased in the elevated [CO(2)] treatment and increased in the elevated temperature treatments relative to ambient conditions. The treatments decreased the number of rays and tracheids per mm(2) of cross

Wood preservation

Treesearch

Stan T. Lebow

2010-01-01

Many commonly used wood species can deteriorate if exposed to conditions that support growth of wood-degrading organisms (see Chap. 14). Wood products can be protected from the attack of decay fungi, harmful insects, or marine borers by applying chemical preservatives. Preservative treatments greatly increase the life of wood structures, thus reducing replacement costs...

Wood anatomical parameters of lowland European oak and Scots pine as proxies for climate reconstructions

NASA Astrophysics Data System (ADS)

Balanzategui, Daniel; Heußner, Karl-Uwe; Wazny, Tomasz; Helle, Gerd; Heinrich, Ingo

2017-04-01

Tree-ring based temperature reconstructions from the temperate lowlands worldwide are largely missing due to diffuse climate signals so far found in tree-ring widths. This motivated us to concentrate our efforts on the wood anatomies of two common European tree species, the European oak (Quercus robur) and Scots pine (Pinus sylvestris). We combined core samples of living trees with archaeological wood from northern Germany and Poland. We measured approx. 46,000 earlywood oak vessels of 34 trees covering the period AD 1500 to 2016 and approx. 7.5 million pine tracheid cells of 41 trees covering the period AD 1300 to 2010. First climate growth analyses indicate that both oak earlywood vessel and pine tracheid parameters contain climate signals which are different and more significant than those found in tree-ring widths. Preliminary results will be presented and discussed at EGU for the first time.

Industry standards for recognition of marginal wood defects

Treesearch

Henry A. Huber; Steve Ruddell; Charles W. McMillin

1990-01-01

This study of 46 U.S. wood products companies that manufacture a variety of hardwood products found no consistently applied formal or standard definition of what constitutes a marginal defect. Analysis indicated homogeneous yet nonspecific rules are used. While there were wide variations in criteria, similar quantitative terms were used. Two distinct classes of defects...

Assessment of the severity of injuries to hands by powered wood splitters.

PubMed

Lindqvist, Aron; Berglund, Maria; von Kieseritzky, Johanna; Nilsson, Olle

2010-11-01

Our aim was to rate the severity of injuries to hands by powered wood splitters. The patients were identified from a computerised registry, and the cause of injury was confirmed by written questionnaire and structured telephone interview. Information about the anatomy of the injury was gathered from patients' records and radiographs. Severity of injury was rated according to the Hand Injury Severity Scoring System (HISS system) and the Injury Severity Score (ISS). The reliability of HISS rating was tested. The mean Hand Injury Severity Score (HISS) was 63 and the mean ISS was 3.7. Twenty-five (19%) of patients had minor, 41 (31%) had moderate, 30 (23%) had severe, and 35 (27 %) had major injuries when scored by the HISS system. Children's injuries were more severe than those of adults. There was no difference in severity between injuries made by wedge and screw splitters. It is not possible to avoid serious hand injuries from powered wood splitters completely by prohibiting one of the two main types of splitter.

The effectiveness and user perception of 3-dimensional digital human anatomy in an online undergraduate anatomy laboratory

NASA Astrophysics Data System (ADS)

Hilbelink, Amy Joanne

2007-12-01

The primary purpose of this study was to determine the effectiveness of implementing desktop 3-dimensional (3D) stereo images of human anatomy into an undergraduate human anatomy distance laboratory. User perceptions of 2D and 3D images were gathered via questionnaire in order to determine ease of use and level of satisfaction associated with the 3D software in the online learning environment. Mayer's (2001, p. 184) principles of design were used to develop the study materials that consisted of PowerPoint presentations and AVI files accessed via Blackboard. The research design employed a mixed-methods approach. Volunteers each were administered a demographic survey and were then stratified into groups based upon pre-test scores. A total sample size of 62 pairs was available for combined data analysis. Quantitative research questions regarding the effectiveness of 2D versus the 3D treatment were analyzed using a doubly-multivariate repeated measures (Doubly-MANOVA) design. Paired test scores achieved by undergraduates on a laboratory practical of identification and spatial relationships of the bones and features of a human skull were used in the analysis. The questionnaire designed to gather user perceptions consisted of quantitative and qualitative questions. Response frequencies were analyzed for the two groups and common themes were noted. Results revealed a statistically significant difference in group means for the main effect of the treatment groups 2D and 3D and for the variables of identification and relationship with the 3D group outperforming the 2D group on both dependent variables. Effect sizes were determined to be small, 0.215 for the identification variable and 0.359 for the relationship variable. Overall, all students liked the convenience of using PowerPoint and AVI files online. The 3D group felt their PowerPoint was more realistic than did the 2D group and both groups appreciated the detailed labeling of the online images. One third of the

Mineral preservatives in the wood of Stradivari and Guarneri.

PubMed

Nagyvary, Joseph; Guillemette, Renald N; Spiegelman, Clifford H

2009-01-01

Following the futile efforts of generations to reach the high standard of excellence achieved by the luthiers in Cremona, Italy, by variations of design and plate tuning, current interest is being focused on differences in material properties. The long-standing question whether the wood of Stradivari and Guarneri were treated with wood preservative materials could be answered only by the examination of wood specimens from the precious antique instruments. In a recent communication (Nature, 2006), we reported about the degradation of the wood polymers in instruments of Stradivari and Guarneri, which could be explained only by chemical manipulations, possibly by preservatives. The aim of the current work was to identify the minerals from the small samples of the maple wood which were available to us from the antique instruments. The ashes of wood from one violin and one cello by Stradivari, two violins by Guarneri, one viola by H. Jay, one violin by Gand-Bernardel were analyzed and compared with a variety of commercial tone woods. The methods of analysis were the following: back-scattered electron imaging, X-ray fluorescence maps for individual elements, wave-length dispersive spectroscopy, energy dispersive X-ray spectroscopy and quantitative microprobe analysis. All four Cremonese instruments showed the unmistakable signs of chemical treatments in the form of chemicals which are not present in natural woods, such as BaSO4, CaF2, borate, and ZrSiO4. In addition to these, there were also changes in the common wood minerals. Statistical evaluation of 12 minerals by discriminant analysis revealed: a. a difference among all four Cremona instruments, b. the difference of the Cremonese instruments from the French and English antiques, and c. only the Cremonese instruments differed from all commercial woods. These findings may provide the answer why all attempts to recreate the Stradivarius from natural wood have failed. There are many obvious implications with regard to

The anatomy of the superficial external pudendal artery: a quantitative study.

PubMed

La Falce, Osvaldir Lanzoni; Ambrosio, João Dias; Souza, Romeu Rodrigues de

2006-10-01

The importance of the superficial external pudendal artery in cases of lower limb obstructive arteriopathies has been established, and a perfect knowledge of its anatomy is desirable for the creation of successful flaps involving it. However, little information is available on the morphometry of this artery. In this study, we conducted a quantitative investigation of the superficial external pudendal artery as the basis for skin grafts. Twenty-five right and left sides of the inguinal region of male cadavers were dissected. After retracting the skin at the inguinal region, the femoral vessels and the sapheno-femoral junction were exposed. The following aspects were then analyzed: 1) the presence of the superficial external pudendal artery, 2) the place of origin of the superficial external pudendal artery and the common trunk, 3) the duplication of the superficial external pudendal artery, 4) the distance from the superficial external pudendal artery or the common trunk to the inguinal ligament, and 5) the diameter of the superficial external pudendal artery. The results were the following: 1) superficial external pudendal arteries were found in 46 of 50 sides (92%); 2) they originated from the femoral artery in 45 cases and from the deep femoral artery in only 1 case; 3) the arteries were found duplicated in 21 cases (46%), as a common trunk in 11 cases (24%), and as a single artery in 14 cases (30%); 4) the distance from the superficial external pudendal artery to the inguinal ligament ranged from 0.8 cm to 8.5 cm; from the common trunk, it ranged from 3.5 cm to 6.7 cm; 5) the diameter of the superficial external pudendal artery ranged from 1.2 mm to 3.8 mm; and 6) the diameter of the common trunk ranged from 1.35 mm to 5.15 mm. The results show that the superficial external pudendal artery generally originates from the femoral artery. It was found as a common trunk, duplicated, or as a single artery. There was a great variability in both the diameter of the

Competitive outcomes between wood-decaying fungi are altered in burnt wood.

PubMed

Edman, Mattias; Eriksson, Anna-Maria

2016-06-01

Fire is an important disturbance agent in boreal forests where it creates a wide variety of charred and other types of heat-modified dead wood substrates, yet how these substrates affect fungal community structure and development within wood is poorly understood. We allowed six species of wood-decaying basidiomycetes to compete in pairs in wood-discs that were experimentally burnt before fungal inoculation. The outcomes of interactions in burnt wood differed from those in unburnt control wood for two species:Antrodia sinuosanever lost on burnt wood and won over its competitor in 67% of the trials compared to 40% losses and 20% wins on unburnt wood. In contrast, Ischnoderma benzoinumwon all interactions on unburnt wood compared to 33% on burnt wood. However, the responses differed depending on the identity of the competing species, suggesting an interaction between competitor and substrate type. The observed shift in competitive balance between fungal species probably results from chemical changes in burnt wood, but the underlying mechanism needs further investigation. Nevertheless, the results indicate that forest fires indirectly structure fungal communities by modifying dead wood, and highlight the importance of fire-affected dead wood substrates in boreal forests. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Genetic dissection of growth, wood basic density and gene expression in interspecific backcrosses of Eucalyptus grandis and E. urophylla

PubMed Central

2012-01-01

Background F1 hybrid clones of Eucalyptus grandis and E. urophylla are widely grown for pulp and paper production in tropical and subtropical regions. Volume growth and wood quality are priority objectives in Eucalyptus tree improvement. The molecular basis of quantitative variation and trait expression in eucalypt hybrids, however, remains largely unknown. The recent availability of a draft genome sequence (http://www.phytozome.net) and genome-wide genotyping platforms, combined with high levels of genetic variation and high linkage disequilibrium in hybrid crosses, greatly facilitate the detection of quantitative trait loci (QTLs) as well as underlying candidate genes for growth and wood property traits. In this study, we used Diversity Arrays Technology markers to assess the genetic architecture of volume growth (diameter at breast height, DBH) and wood basic density in four-year-old progeny of an interspecific backcross pedigree of E. grandis and E. urophylla. In addition, we used Illumina RNA-Seq expression profiling in the E. urophylla backcross family to identify cis- and trans-acting polymorphisms (eQTLs) affecting transcript abundance of genes underlying QTLs for wood basic density. Results A total of five QTLs for DBH and 12 for wood basic density were identified in the two backcross families. Individual QTLs for DBH and wood basic density explained 3.1 to 12.2% of phenotypic variation. Candidate genes underlying QTLs for wood basic density on linkage groups 8 and 9 were found to share trans-acting eQTLs located on linkage groups 4 and 10, which in turn coincided with QTLs for wood basic density suggesting that these QTLs represent segregating components of an underlying transcriptional network. Conclusion This is the first demonstration of the use of next-generation expression profiling to quantify transcript abundance in a segregating tree population and identify candidate genes potentially affecting wood property variation. The QTLs identified in this

Transcript patterns of Phanerochaete chrysosporium genes in organopollutant contaminated soils and in wood

Treesearch

Amber Vanden Wymelenberg; Bernard Janse; Jill Gaskell; Diane Dietrich; Marcelo Vallim; Dan Cullen

1998-01-01

We describe here recent methods for quantitative assessment of specific P. chrysosporium mRNAs in organopollutant contaminated soils and in Aspen wood chips. Magnetic capture techniques were used to rapidly purify poly(A)-RNA, and quantitative RT-PCR protocols were developed for all known lignin peroxidase (lip) and cellobiohydrolase (cbh1) genes. The methodology is...

An Anatomy Pre-Course Predicts Student Performance in a Professional Veterinary Anatomy Curriculum.

PubMed

McNulty, Margaret A; Lazarus, Michelle D

2018-01-18

Little to no correlation has been identified between previous related undergraduate coursework or outcomes on standardized tests and performance in a veterinary curriculum, including anatomy coursework. Therefore, a relatively simplistic method to predict student performance before entrance would be advantageous to many. The purpose of this study was to evaluate whether there is a correlation between performance in a veterinary anatomy pre-course and subsequent performance within a professional anatomy curriculum. Incoming first-year veterinary students at the Louisiana State University School of Veterinary Medicine were asked to participate in a free weeklong pre-course, before the start of the semester. The pre-course covered the musculoskeletal anatomy of the canine thoracic limb using dissection-based methods. Student performance, as evaluated by test grades in the pre-course, did indeed correlate with test grades in professional veterinary anatomy courses. A significant and positive correlation was identified between pre-course final exam performance and performance on examinations in each of 3 professional anatomy courses. Qualitative analyses of student comments pertaining to their experience within the pre-course indicated differences in the perceived benefits of the pre-course between high-, middle-, and low-performing students. These varied perceptions may provide predictive feedback as well as guidance for supporting lower performing students. Together, these results indicate that performance in a weeklong pre-course covering only a small portion of canine anatomy is a strong predictor of performance within a professional anatomy curriculum. In addition, the pre-course differentially affected student perceptions of their learning experience.

How useful is YouTube in learning heart anatomy?

PubMed

Raikos, Athanasios; Waidyasekara, Pasan

2014-01-01

Nowadays more and more modern medical degree programs focus on self-directed and problem-based learning. That requires students to search for high quality and easy to retrieve online resources. YouTube is an emerging platform for learning human anatomy due to easy access and being a free service. The purpose of this study is to make a quantitative and qualitative analysis of the available human heart anatomy videos on YouTube. Using the search engine of the platform we searched for relevant videos using various keywords. Videos with irrelevant content, animal tissue, non-English language, no sound, duplicates, and physiology focused were excluded from further elaboration. The initial search retrieved 55,525 videos, whereas only 294 qualified for further analysis. A unique scoring system was used to assess the anatomical quality and details, general quality, and the general data for each video. Our results indicate that the human heart anatomy videos available on YouTube conveyed our anatomical criteria poorly, whereas the general quality scoring found borderline. Students should be selective when looking up on public video databases as it can prove challenging, time consuming, and the anatomical information may be misleading due to absence of content review. Anatomists and institutions are encouraged to prepare and endorse good quality material and make them available online for the students. The scoring rubric used in the study comprises a valuable tool to faculty members for quality evaluation of heart anatomy videos available on social media platforms. Copyright © 2013 American Association of Anatomists.

Wood fuel preparation

Treesearch

L. H. Reineke

1965-01-01

This report gives information on the preparation of wood fuel from wood residues and other wood raw materials. Types of wood fuel discussed are cordwood, stovewood, slabwood, kindling, chips, hogged fuel, sawdust and shavings, bark, charcoal, alcohol, and briquets. Related information is given on types of machinery for preparing wood fuel and on possible markets for...

Who Is Repeating Anatomy? Trends in an Undergraduate Anatomy Course

ERIC Educational Resources Information Center

Schutte, Audra F.

2016-01-01

Anatomy courses frequently serve as prerequisites or requirements for health sciences programs. Due to the challenging nature of anatomy, each semester there are students remediating the course (enrolled in the course for a second time), attempting to earn a grade competitive for admissions into a program of study. In this retrospective study,…

Classic versus millennial medical lab anatomy.

PubMed

Benninger, Brion; Matsler, Nik; Delamarter, Taylor

2014-10-01

This study investigated the integration, implementation, and use of cadaver dissection, hospital radiology modalities, surgical tools, and AV technology during a 12-week contemporary anatomy course suggesting a millennial laboratory. The teaching of anatomy has undergone the greatest fluctuation of any of the basic sciences during the past 100 years in order to make room for the meteoric rise in molecular sciences. Classically, anatomy consisted of a 2-year methodical, horizontal, anatomy course; anatomy has now morphed into a 12-week accelerated course in a vertical curriculum, at most institutions. Surface and radiological anatomy is the language for all clinicians regardless of specialty. The objective of this study was to investigate whether integration of full-body dissection anatomy and modern hospital technology, during the anatomy laboratory, could be accomplished in a 12-week anatomy course. Literature search was conducted on anatomy text, journals, and websites regarding contemporary hospital technology integrating multiple image mediums of 37 embalmed cadavers, surgical suite tools and technology, and audio/visual technology. Surgical and radiology professionals were contracted to teach during the anatomy laboratory. Literature search revealed no contemporary studies integrating full-body dissection with hospital technology and behavior. About 37 cadavers were successfully imaged with roentograms, CT, and MRI scans. Students were in favor of the dynamic laboratory consisting of multiple activity sessions occurring simultaneously. Objectively, examination scores proved to be a positive outcome and, subjectively, feedback from students was overwhelmingly positive. Despite the surging molecular based sciences consuming much of the curricula, full-body dissection anatomy is irreplaceable regarding both surface and architectural, radiological anatomy. Radiology should not be a small adjunct to understand full-body dissection, but rather, full-body dissection

Anatomy Comic Strips

ERIC Educational Resources Information Center

Park, Jin Seo; Kim, Dae Hyun; Chung, Min Suk

2011-01-01

Comics are powerful visual messages that convey immediate visceral meaning in ways that conventional texts often cannot. This article's authors created comic strips to teach anatomy more interestingly and effectively. Four-frame comic strips were conceptualized from a set of anatomy-related humorous stories gathered from the authors' collective…

Wood-related occupations, wood dust exposure, and sinonasal cancer.

PubMed

Hayes, R B; Gerin, M; Raatgever, J W; de Bruyn, A

1986-10-01

A case-control study was conducted to examine the relations between type of woodworking and the extent of wood dust exposure to the risks for specific histologic types of sinonasal cancer. In cooperation with the major treatment centers in the Netherlands, 116 male patients newly diagnosed between 1978 and 1981 with primary malignancies of epithelial origin of this site were identified for study. Living controls were selected from the municipal registries, and deceased controls were selected from the national death registry. Interviews were completed for 91 (78%) cases and 195 (75%) controls. Job histories were coded by industry and occupation. An index of exposure was developed to classify the extent of occupational exposure to wood dust. When necessary, adjustment was made for age and usual cigarette use. The risk for nasal adenocarcinoma was elevated by industry for the wood and paper industry (odds ratio (OR) = 11.9) and by occupation for those employed in furniture and cabinet making (OR = 139.8), in factory joinery and carpentry work (OR = 16.3), and in association with high-level wood dust exposure (OR = 26.3). Other types of nasal cancer were not found to be associated with wood-related industries or occupations. A moderate excess in risk for squamous cell cancer (OR = 2.5) was associated with low-level wood dust exposure; however, no dose-response relation was evident. The association between wood dust and adenocarcinoma was strongest for those employed in wood dust-related occupations between 1930 and 1941. The risk of adenocarcinoma did not appear to decrease for at least 15 years after termination of exposure to wood dust. No cases of nasal adenocarcinoma were observed in men whose first exposure to wood dust occurred after 1941.

Effect of cement/wood ratios and wood storage conditions on hydration temperature, hydration time, and compressive strength of wood-cement mixtures

Treesearch

Andy W.C. Lee; Zhongli Hong; Douglas R. Phillips; Chung-Yun Hse

1987-01-01

This study investigated the effect of cement/wood ratios and wood storage conditions on hydration temperature, hydration time, and compressive strength of wood-cement mixtures made from six wood species: southern pine, white oak, southern red oak, yellow-poplar, sweetgum, and hickory. Cement/wood ratios varied from 13/1 to 4/1. Wood storage conditions consisted of air-...

Wood preservation

Treesearch

Rebecca E. Ibach

2003-01-01

When wood is exposed to various environmental conditions, many degradation reactions (biological, ultraviolet, mechanical, moisture, and chemical) can occur. To protect wood from biological degradation, chemical preservatives are applied by nonpressure or pressure treatment. Penetration and retention of a chemical depend upon the wood species and the amount of...

Quantitative color measurement for black walnut wood.

Treesearch

Ali A. Moslemi

1967-01-01

Black walnut (Juglans nigra L.) veneer specimens with wide variations in color were evaluated by a quantitative method of color measurement. The internationally adopted CIE system of colorimetry was used to analyze the data. These data were converted to also show them in the Munsell system. Color differences among the walnut veneer specimens were also numerically...

Interprofessional anatomy education in the United Kingdom and Ireland: Perspectives from students and teachers.

PubMed

Smith, Claire F; Hall, Samuel; Border, Scott; Adds, Philip J; Finn, Gabrielle M

2015-01-01

There is increasing recognition of multiprofessional learning in anatomy and its role in medical and healthcare professions. This study utilized two components to investigate anatomy interprofessional education (AIPE) in the United Kingdom and Ireland. First, a survey involving qualitative and quantitative components asked Heads of Anatomy to report on their institutions' uptake of AIPE. Second, a series of case studies explored the experiences of students by using evaluation forms and an in-depth analysis of thematic concepts to understand the learners' perspectives on designing and delivering AIPE. Out of the 13 institutions that took part in the survey, eight did not offer an AIPE program. Between the remaining five institutions that deliver AIPE programs, 10 different modules are offered with the majority involving healthcare professions. The AIPE component is rated highly by students. The themes from the case studies highlight how valuable AIPE is from the student perspective both in terms of engaging them in anatomy as well as in the broader skills of teamwork and communication. The case studies also revealed how AIPE can be engaging for groups of students who might not have previously had access to cadaveric anatomy, for example, engineers and archeologists. The results of this study have implications for curriculum design in medicine and healthcare but also for further engagement of professional groups from non-healthcare backgrounds. © 2015 American Association of Anatomists.

Learning Anatomy Enhances Spatial Ability

ERIC Educational Resources Information Center

Vorstenbosch, Marc A. T. M.; Klaassen, Tim P. F. M.; Donders, A. R. T.; Kooloos, Jan G. M.; Bolhuis, Sanneke M.; Laan, Roland F. J. M.

2013-01-01

Spatial ability is an important factor in learning anatomy. Students with high scores on a mental rotation test (MRT) systematically score higher on anatomy examinations. This study aims to investigate if learning anatomy also oppositely improves the MRT-score. Five hundred first year students of medicine ("n" = 242, intervention) and…

Wood as an adherend

Treesearch

Bryan H. River; Charles B. Vick; Robert H. Gillespie

1991-01-01

Wood is a porous, permeable, hygroscopic, orthotropic, biological composite material of extreme chemical diversity and physical intricacy. Table 1.1 provides an overview of the may variables, including wood variables, that bear on the bonding and performance of wood in wood joints and wood-based materials. Of particular note is the fact that wood properties vary...

Projected wood energy impact on US forest wood resources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Skog, K.E.

1993-12-31

The USDA Forest Service has developed long-term projections of wood energy use as part of a 1993 assessment of demand for and supply of resources from forest and range lands in the United States. To assess the impact of wood energy demand on timber resources, a market equilibrium model based on linear programming was developed to project residential, industrial, commercial, and utility wood energy use from various wood energy sources: roundwood from various land sources, primary wood products mill residue, other wood residue, and black liquor. Baseline projections are driven by projected price of fossil fuels compared to price ofmore » wood fuels and the projected increase in total energy use in various end uses. Wood energy use is projected to increase from 2.67 quad in 1986 to 3.5 quad in 2030 and 3.7 quad in 2040. This is less than the DOE National Energy Strategy projection of 5.5 quad in 2030. Wood energy from forest sources (roundwood) is projected to increase from 3.1 billion (10{sup 9}) ft{sup 3} in 1986 to 4.4. billion ft{sup 3} in 2030 and 4.8 billion ft{sup 3} in 2040 (88, 124 and 136 million m{sup 3}, respectively). This rate of increase of roundwood use for fuel -- 0.8 percent per year -- is virtually the same as the projected increase rate for roundwood for pulpwood. Pulpwood roundwood is projected to increase from 4.2 billion ft{sup 3} in 1986 to 6.0 billion ft{sup 3} in 2030 and 6.4 billion ft{sup 3} in 2040 (119, 170 and 183 million m{sup 3}, respectively).« less

From macro-scale to micro-scale computational anatomy: a perspective on the next 20 years.

PubMed

Mori, Kensaku

2016-10-01

This paper gives our perspective on the next two decades of computational anatomy, which has made great strides in the recognition and understanding of human anatomy from conventional clinical images. The results from this field are now used in a variety of medical applications, including quantitative analysis of organ shapes, interventional assistance, surgical navigation, and population analysis. Several anatomical models have also been used in computational anatomy, and these mainly target millimeter-scale shapes. For example, liver-shape models are almost completely modeled at the millimeter scale, and shape variations are described at such scales. Most clinical 3D scanning devices have had just under 1 or 0.5 mm per voxel resolution for over 25 years, and this resolution has not changed drastically in that time. Although Z-axis (head-to-tail direction) resolution has been drastically improved by the introduction of multi-detector CT scanning devices, in-plane resolutions have not changed very much either. When we look at human anatomy, we can see different anatomical structures at different scales. For example, pulmonary blood vessels and lung lobes can be observed in millimeter-scale images. If we take 10-µm-scale images of a lung specimen, the alveoli and bronchiole regions can be located in them. Most work in millimeter-scale computational anatomy has been done by the medical-image analysis community. In the next two decades, we encourage our community to focus on micro-scale computational anatomy. In this perspective paper, we briefly review the achievements of computational anatomy and its impacts on clinical applications; furthermore, we show several possibilities from the viewpoint of microscopic computational anatomy by discussing experimental results from our recent research activities. Copyright © 2016 Elsevier B.V. All rights reserved.

Skull Base Anatomy.

PubMed

Patel, Chirag R; Fernandez-Miranda, Juan C; Wang, Wei-Hsin; Wang, Eric W

2016-02-01

The anatomy of the skull base is complex with multiple neurovascular structures in a small space. Understanding all of the intricate relationships begins with understanding the anatomy of the sphenoid bone. The cavernous sinus contains the carotid artery and some of its branches; cranial nerves III, IV, VI, and V1; and transmits venous blood from multiple sources. The anterior skull base extends to the frontal sinus and is important to understand for sinus surgery and sinonasal malignancies. The clivus protects the brainstem and posterior cranial fossa. A thorough appreciation of the anatomy of these various areas allows for endoscopic endonasal approaches to the skull base. Copyright © 2016 Elsevier Inc. All rights reserved.

The Fungal Degradation of Wood and Wood Products Selected Bibliography

DTIC Science & Technology

1981-08-01

Pi 0-Alt^Jihi 1 TECHNICAL LIBRARY SPECIAL PUBLICATION ARLCD-SP-81006 THE FUNGAL DEGRADATION OF WOOD AND WOOD PRODUCTS SELECTED BIBLIOGRAPHY...GOVT ACCESSION NO. READ INSTRUCTIONS BEFORE COMPLETING FORM 3. RECIPIENT’S CATALOG NUMBER 4. TITLE fand SubJltJo; THE FUNGAL DEGRADATION OF...search con- centrated on the microbiological deterioration or degradation of wood (trees) or wood products which are found or used in tropical

Finishing of wood

Treesearch

R. Sam Williams

1999-01-01

The primary function of any wood finish (paint, varnish, and stain, for example) is to protect the wood surface, help maintain a certain appearance, and provide a cleanable surface. Although wood can be used both outdoors and indoors without finishing, unfinished wood surfaces exposed to the weather change color, are roughened by photodegradation and surface checking,...

Variations in the monoterpene composition of ponderosa pine wood oleoresin

Treesearch

Richard H. Smith

1964-01-01

A wide range in quantitative composition of the wood oleoresin monoterpenes was found among 64 ponderosa pines in the central Sierra Nevada by gas chromatographic analysis. An inverse relationship was found in the amount of β-pinene and Δ3-carene. Practically no difference in composition could be associated with (a) type of...

Dancers' Perceived and Actual Knowledge of Anatomy.

PubMed

Kotler, Dana H; Lynch, Meaghan; Cushman, Daniel; Hu, Jason; Garner, Jocelyn

2017-06-15

Dancers are highly susceptible to musculoskeletal injuries and frequently require interaction with medical professionals. While many dancers have a finely tuned awareness of their bodies, their knowledge of the fundamentals of human anatomy is not uniform. There is a paucity of literature on the benefits of human anatomy education in dancers, though it seems intuitive that there should be a relationship. The purpose of this study was to assess dancers' perceived and actual knowledge of basic musculoskeletal anatomy and its relationship to function. Adult dancers at the undergraduate, pre-professional, and professional levels were surveyed through an anonymous online questionnaire. Questions included demographic information, dance techniques studied, anatomy training, and injury history. Subjects rated their perceived knowledge of anatomy and were tested with 15 multiple-choice questions on basic musculoskeletal anatomy. Four hundred seventy-five surveys were completed. Ordinal regression showed a correlation of perceived to actual knowledge of anatomy (p < 0.001). Factors that correlated with increases in both perceived and actual knowledge of anatomy included having taken an anatomy course of any type (p < 0.001) and increased age (p ≤ 0.001). Years of dance training and professional dancer status both significantly correlated with increased knowledge of anatomy (p < 0.001) but not perceived knowledge. Chi-square analysis showed that dancers with training in either modern or jazz dance had a significantly higher perceived, but not actual, knowledge when compared to those without training in those styles of dance (p < 0.001 and p = 0.011, respectively). In conclusion, dancers generally scored well on questions pertaining to basic musculoskeletal anatomy, and their perception correlated with their actual knowledge of anatomy. Factors that contribute to dancers' knowledge of anatomy include age, years of experience, professional dancer status, and anatomy training.

Introduction to anatomy on Wikipedia.

PubMed

Ledger, Thomas Stephen

2017-09-01

Wikipedia (www.wikipedia.com) is the largest encyclopaedia in existence. Of over five million English-language articles, about 6000 relate to Anatomy, which are viewed roughly 30 million times monthly. No work parallels the amount of attention, scope or interdisciplinary layout of Wikipedia, and it offers a unique opportunity to improve the anatomical literacy of the masses. Anatomy on Wikipedia is introduced from an editor's perspective. Article contributors, content, layout and accuracy are discussed, with a view to demystifying editing for anatomy professionals. A final request for edits or on-site feedback from anatomy professionals is made. © 2017 Anatomical Society.

[Laurentius on anatomy].

PubMed

Sawai, Tadashi; Sakai, Tatsuo

2005-03-01

Andreas Laurentius wrote Opera anatomica (1593) and Historia anatomica (1600). These books were composed of two types of chapters; 'historia' and 'quaestio'. His description is not original, but take from other anatomists. 'Historia' describes the structure, action and usefulness of the body parts clarified after dissection. 'Quaestio' treats those questions which could not be solved only by dissection. Laurentius cited many previous contradicting interpretations to these questions and choose a best interpretation for the individual questions. In most cases, Laurentius preferred Galen's view. Historia anatomica retained almost all the 'historia' and 'quaestio' from Opera anatomica, and added some new 'historia' and 'quaestio', especially in regard to the components of the body, such as ligaments, membranes, vessels, nerves and glands. Other new 'historia' and 'quaestio' in Historia anatomica concerned several topics on anatomy in general to comprehensively analyze the history of anatomy, methods of anatomy, and usefulness of anatomy. Historia anatomica reviewed what was anatomy by describing in 'historia' what was known and in 'quaestio' what was unresolved. Till now Laurentius's anatomical works have attracted little attention because his description contained few original findings and depended on previous books. However, the important fact that Historia anatomica was very popular in the 17th century tells us that people needed non-original and handbook style of this textbook. Historia anatomica is important for further research on the propagation of anatomical knowledge from professional anatomists to non-professionals in the 17th century.

Wood preservatives and pressure-treated wood: considerations for historic-preservation projects

Treesearch

Ronald W. Anthony; Stan T. Lebow

2015-01-01

Wood, an abundant resource throughout most of the world, has been used as a building material for thousands of years. Many historic buildings have been built primarily of wood, and masonry and stone buildings generally have wood elements, both structural and architectural. As a biological material, wood is both remarkably complex and yet quite durable if well...

Can melamine-based wood primers help in understanding bonded wood durability?

Treesearch

Charles R. Frihart; Jermal G. Chandler

2006-01-01

Melamine–formaldehyde adhesives form wood bonds with exterior durability, and the melamine is more easily studied because of its significant nitrogen content (compared with the lack of nitrogen in wood components). In addition, some melamine–formaldehyde chemicals reduce wood swelling [6], enter into wood cell walls [7], and strengthen them [8]. This information led to...

Wood composites

Treesearch

Lars Berglund; Roger M. Rowell

2005-01-01

A composite can be defined as two or more elements held together by a matrix. By this definition, what we call “solid wood” is a composite. Solid wood is a three-dimensional composite composed of cellulose, hemicelluloses and lignin (with smaller amounts of inorganics and extractives), held together by a lignin matrix. The advantages of developing wood composites are (...

Polymer/clay/wood nanocomposites: The effect of incorporation of nanoclay into the wood/polymer composites

NASA Astrophysics Data System (ADS)

Hetzer, Max E.

composites were also investigated. A model based on the Halpin-Tsai model was developed that predicts the (Young's) modulus-temperature relationship of the composites based on discontinuous fillers. It was found that the molecular weight of the compatibilizer significantly affects the exfoliation/dispersion of the nanoclay within the polymer matrix. A compatibilizer containing a high Mw fraction based on high density polyethylene (HDPE) and a low Mw fraction based on linear low density polyethylene (LLDPE) was found to be the most effective at enhancing the thermal and mechanical properties of PCNs and WPCs. A compatibilizer containing greater than 60 wt.% high Mw fraction resulted in a 30% increase of the modulus and a 15°C increase of the heat deflection temperature (HDT). The addition of the nanoclay had a detrimental effect on the moduli of PCNs and WPCs when a low Mw compatibilizer based on LLDPE was used. The moduli of these composites increased with increasing high Mw content of the compatibilizer and increasing nanoclay content. The addition of the nanoclay to wood/polymer composites resulted in an increased modulus of elasticity and HDT of these composites. The developed model quantitatively predicts the modulus-temperature relationship of the fiber containing composites. It was found that the modulus of the composites varies linearly with temperature and was highly dependent on the exfoliation of the nanoclay within the polymer matrix.

Thermal decomposition of wood: influence of wood components and cellulose crystallite size.

PubMed

Poletto, Matheus; Zattera, Ademir J; Forte, Maria M C; Santana, Ruth M C

2012-04-01

The influence of wood components and cellulose crystallinity on the thermal degradation behavior of different wood species has been investigated using thermogravimetry, chemical analysis and X-ray diffraction. Four wood samples, Pinus elliottii (PIE), Eucalyptus grandis (EUG), Mezilaurus itauba (ITA) and Dipteryx odorata (DIP) were used in this study. The results showed that higher extractives contents associated with lower crystallinity and lower cellulose crystallite size can accelerate the degradation process and reduce the wood thermal stability. On the other hand, the thermal decomposition of wood shifted to higher temperatures with increasing wood cellulose crystallinity and crystallite size. These results indicated that the cellulose crystallite size affects the thermal degradation temperature of wood species. Copyright © 2012. Published by Elsevier Ltd.

Bacteria in decomposing wood and their interactions with wood-decay fungi.

PubMed

Johnston, Sarah R; Boddy, Lynne; Weightman, Andrew J

2016-11-01

The fungal community within dead wood has received considerable study, but far less attention has been paid to bacteria in the same habitat. Bacteria have long been known to inhabit decomposing wood, but much remains underexplored about their identity and ecology. Bacteria within the dead wood environment must interact with wood-decay fungi, but again, very little is known about the form this takes; there are indications of both antagonistic and beneficial interactions within this fungal microbiome. Fungi are hypothesised to play an important role in shaping bacterial communities in wood, and conversely, bacteria may affect wood-decay fungi in a variety of ways. This minireview considers what is currently known about bacteria in wood and their interactions with fungi, and proposes possible associations based on examples from other habitats. It aims to identify key knowledge gaps and pressing questions for future research. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Finishes for Wood Decks

Treesearch

Mark Knaebe

2013-01-01

Wood decks have become an important part of residential construction. Wood decks can add versatile living space to a home and, with minimal maintenance, provide decades of use. However, wood decks are exposed to high levels of stress from severe weather conditions that shrink and swell the wood. Without proper maintenance, wood decks can develop problems such as checks...

Student perceptions about learning anatomy

NASA Astrophysics Data System (ADS)

Notebaert, Andrew John

This research study was conducted to examine student perceptions about learning anatomy and to explore how these perceptions shape the learning experience. This study utilized a mixed-methods design in order to better understand how students approach learning anatomy. Two sets of data were collected at two time periods; one at the beginning and one at the end of the academic semester. Data consisted of results from a survey instrument that contained open-ended questions and a questionnaire and individual student interviews. The questionnaire scored students on a surface approach to learning (relying on rote memorization and knowing factual information) scale and a deep approach to learning (understanding concepts and deeper meaning behind the material) scale. Students were asked to volunteer from four different anatomy classes; two entry-level undergraduate courses from two different departments, an upper-level undergraduate course, and a graduate level course. Results indicate that students perceive that they will learn anatomy through memorization regardless of the level of class being taken. This is generally supported by the learning environment and thus students leave the classroom believing that anatomy is about memorizing structures and remembering anatomical terminology. When comparing this class experience to other academic classes, many students believed that anatomy was more reliant on memorization techniques for learning although many indicated that memorization is their primary learning method for most courses. Results from the questionnaire indicate that most students had decreases in both their deep approach and surface approach scores with the exception of students that had no previous anatomy experience. These students had an average increase in surface approach and so relied more on memorization and repetition for learning. The implication of these results is that the learning environment may actually amplify students' perceptions of the anatomy

Reflections on anatomy and physical anthropology.

PubMed

Tobias, P V

1978-06-24

The close and ineluctable links between anatomy and physical anthropology are explored. The relevance of many aspects of physical anthropology in the teaching of anatomy to medical and dental students is stressed. It is suggested that, since physical anthropology is one of the frontier fields in anatomical research today, it may help to attract personnel to anatomy departments which in most parts of the world are suffering from a serious shortage of suitably qualified people to teach gross anatomy.

Variation in brain anatomy in frogs and its possible bearing on their locomotor ecology.

PubMed

Manzano, Adriana S; Herrel, Anthony; Fabre, Anne-Claire; Abdala, Virginia

2017-07-01

Despite the long-standing interest in the evolution of the brain, relatively little is known about variation in brain anatomy in frogs. Yet, frogs are ecologically diverse and, as such, variation in brain anatomy linked to differences in lifestyle or locomotor behavior can be expected. Here we present a comparative morphological study focusing on the macro- and micro-anatomy of the six regions of the brain and its choroid plexus: the olfactory bulbs, the telencephalon, the diencephalon, the mesencephalon, the rhombencephalon, and the cerebellum. We also report on the comparative anatomy of the plexus brachialis responsible for the innervation of the forelimbs. It is commonly thought that amphibians have a simplified brain organization, associated with their supposedly limited behavioral complexity and reduced motor skills. We compare frogs with different ecologies that also use their limbs in different contexts and for other functions. Our results show that brain morphology is more complex and more variable than typically assumed. Moreover, variation in brain morphology among species appears related to locomotor behavior as suggested by our quantitative analyses. Thus we propose that brain morphology may be related to the locomotor mode, at least in the frogs included in our analysis. © 2017 Anatomical Society.

Evaluation of an innovative hands-on anatomy-centered ultrasound curriculum to supplement graduate gross anatomy education.

PubMed

Royer, Danielle F; Kessler, Ross; Stowell, Jeffrey R

2017-07-01

Ultrasound (US) can enhance anatomy education, yet is incorporated into few non-medical anatomy programs. This study is the first to evaluate the impact of US training in gross anatomy for non-medical students in the United States. All 32 master's students enrolled in gross anatomy with the anatomy-centered ultrasound (ACUS) curriculum were recruited. Mean Likert ratings on pre- and post-course surveys (100% response rates) were compared to evaluate the effectiveness of the ACUS curriculum in developing US confidence, and gauge its impact on views of US. Post-course, students reported significantly higher (P < 0.001) mean confidence ratings in five US skills (pre-course versus post-course mean): obtaining scans (3.13 ±1.04 versus 4.03 ±0.78), optimizing images (2.78 ±1.07 versus 3.75 ±0.92), recognizing artifacts (2.94 ±0.95 versus 3.97 ±0.69), distinguishing tissue types (2.88 ±0.98 versus 4.09 ±0.69), and identifying structures (2.97 ±0.86 versus 4.03 ±0.59), demonstrating the success of the ACUS curriculum in students with limited prior experience. Views on the value of US to anatomy education and to students' future careers remained positive after the course. End-of-semester quiz performance (91% response rate) provided data on educational outcomes. The average score was 79%, with a 90% average on questions about distinguishing tissues/artifacts, demonstrating positive learning outcomes and retention. The anatomy-centered ultrasound curriculum significantly increased confidence with and knowledge of US among non-medical anatomy students with limited prior training. Non-medical students greatly value the contributions that US makes to anatomy education and to their future careers. It is feasible to enhance anatomy education outside of medical training by incorporating US. Anat Sci Educ 10: 348-362. © 2016 American Association of Anatomists. © 2016 American Association of Anatomists.

[History of anatomy in Strasbourg].

PubMed

Le Minor, J M; Kahn, J L

1989-01-01

When printing came into being, Strasbourg played a crucial role in the dissemination of the knowledge on anatomy, especially with the publication of Brunschwig's famous treatise on surgery in 1497. The first official human dissection in Strasbourg was performed in 1517. The teaching of medicine really began with the establishment of the Academy in 1566, but it was only in 1652 that a specific chair was created for anatomy. The first anatomical theatre was opened in 1670 in a secularized church contiguous to the city hospital. Until 1708, the teaching of anatomy is combined with that of botany; it was only from this date that anatomy was to be associated with surgery, and such was the case until the French Revolution. During the nineteenth century an impressive museum of anatomy was gradually established in Strasbourg. In 1872, after the annexation of Alsace, when the new german university was created, normal and pathological anatomy were separated and each chair attached to a particular institute. The building housing the institutes of normal and pathological anatomy was inaugurated in 1877 and is still used today. In 1919, when the Faculty of medicine was reorganized after Alsace was restored to France, histology and embryology were definitively separated from anatomy. Many famous anatomists worked in Strasbourg, among whom are to be found: J. G. von Andernach (1497-1574), T. Lauth (1758-1826), F. D. Reisseissen (1773-1828), J. F. Lobstein (1777-1835), E. A. Lauth (1803-1837), E. Küss (1815-1871), E. Koeberlé (1828-1915), E. Beaunis (1830-1921), H. D. Bouchard (1833-1899), J. G. Joessel (1838-1892), W. Waldeyer (1836-1921), G. Schwalbe (1844-1916), W. Pfitzner (1853-1903), F. Keibel (1861-1929), A. Forster (1878-1957) and Ph. Bellocq (1888-1962).

Lignin-Retaining Transparent Wood.

PubMed

Li, Yuanyuan; Fu, Qiliang; Rojas, Ramiro; Yan, Min; Lawoko, Martin; Berglund, Lars

2017-09-11

Optically transparent wood, combining optical and mechanical performance, is an emerging new material for light-transmitting structures in buildings with the aim of reducing energy consumption. One of the main obstacles for transparent wood fabrication is delignification, where around 30 wt % of wood tissue is removed to reduce light absorption and refractive index mismatch. This step is time consuming and not environmentally benign. Moreover, lignin removal weakens the wood structure, limiting the fabrication of large structures. A green and industrially feasible method has now been developed to prepare transparent wood. Up to 80 wt % of lignin is preserved, leading to a stronger wood template compared to the delignified alternative. After polymer infiltration, a high-lignin-content transparent wood with transmittance of 83 %, haze of 75 %, thermal conductivity of 0.23 W mK -1 , and work-tofracture of 1.2 MJ m -3 (a magnitude higher than glass) was obtained. This transparent wood preparation method is efficient and applicable to various wood species. The transparent wood obtained shows potential for application in energy-saving buildings. © 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

Lignin‐Retaining Transparent Wood

PubMed Central

Fu, Qiliang; Rojas, Ramiro; Yan, Min; Lawoko, Martin

2017-01-01

Abstract Optically transparent wood, combining optical and mechanical performance, is an emerging new material for light‐transmitting structures in buildings with the aim of reducing energy consumption. One of the main obstacles for transparent wood fabrication is delignification, where around 30 wt % of wood tissue is removed to reduce light absorption and refractive index mismatch. This step is time consuming and not environmentally benign. Moreover, lignin removal weakens the wood structure, limiting the fabrication of large structures. A green and industrially feasible method has now been developed to prepare transparent wood. Up to 80 wt % of lignin is preserved, leading to a stronger wood template compared to the delignified alternative. After polymer infiltration, a high‐lignin‐content transparent wood with transmittance of 83 %, haze of 75 %, thermal conductivity of 0.23 W mK−1, and work‐tofracture of 1.2 MJ m−3 (a magnitude higher than glass) was obtained. This transparent wood preparation method is efficient and applicable to various wood species. The transparent wood obtained shows potential for application in energy‐saving buildings. PMID:28719095

Lymphatic Anatomy.

PubMed

Hsu, Michael C; Itkin, Maxim

2016-12-01

Recent development of new lymphatic imaging and intervention techniques, such as intranodal lymphangiogram, dynamic contrast enhanced magnetic resonance lymphangiography and lymphatic embolization, have resulted in the resurgence of interest in the lymphatic anatomy. The lymphatic system is a continuous maze of interlacing vessels and lymph nodes and is extremely complex and variable. This presents a significant challenge for interpretation of imaging and performance of interventions on this system. There is an embryological reason for this complexity and variability; the lymphatic system sprouts off of primordia from several locations in the body, which later fuse together at different stages of development of the embryo. The lymphatic system can be divided in three distinct parts: soft tissue lymphatics, intestinal lymphatics, and liver lymphatics. Liver and intestinal lymphatics generate approximately 80% of the body lymph and are functionally the most important parts of the lymphatic system. However, their normal anatomy and pathological changes are relatively unknown. In this chapter we will explore the anatomy of these three systems relevant to lymphatic imaging and interventions. Copyright © 2016 Elsevier Inc. All rights reserved.

Remediation Trends in an Undergraduate Anatomy Course and Assessment of an Anatomy Supplemental Study Skills Course

ERIC Educational Resources Information Center

Schutte, Audra Faye

2013-01-01

Anatomy A215: Basic Human Anatomy (Anat A215) is an undergraduate human anatomy course at Indiana University Bloomington (IUB) that serves as a requirement for many degree programs at IUB. The difficulty of the course, coupled with pressure to achieve grades for admittance into specific programs, has resulted in high remediation rates. In an…

Biodeterioration of wood

Treesearch

Carol A. Clausen

2010-01-01

Under proper conditions, wood will give centuries of service. However, under conditions that permit the development of wood-degrading organisms, protection must be provided during processing, merchandising, and use. The organisms that can degrade wood are principally fungi, insects, bacteria, and marine borers.

Quantitative and qualitative analysis of student tutors as near-peer teachers in the gross anatomy course.

PubMed

Walser, J; Horneffer, A; Oechsner, W; Huber-Lang, M; Gerhardt-Szep, S; Boeckers, A

2017-03-01

Peer teaching is a well-established teaching method in medical education. During the 2012/13 winter term, the Institute of Anatomy and Cell Biology in Ulm, Germany, introduced a longitudinal didactics program ("Train the Tutor": TtT) to train student tutors as near-peer teachers (NPT) in the dissection course (DC). Twenty-three of 38 tutors participated in the programme. Our study describes the educational concept and the NPTs' activities in the dissection course. NPTs documented their activities on a daily basis in the form of semi-structured reports. A total of 575 reports were quantitatively and qualitatively analysed. Free-text analysis was performed using Grounded Theory followed by code quantification of all indications (n=1868). NPTs spend 61% of their time dissecting by themselves or supervising the tutee's dissection process. Organisational tasks had a larger share at the beginning of the course. Just before examinations the proportion of time spent giving feedback rose. Of all positive indications, 45% described experiences working with the tutees. In contrast, 68% of all negative indications were characterized by a self-critical reflection on their own activities. NPTs included all learning domains in their teaching, substantially functioning as teachers and role models to convey particular attitudes. TtT-Trained Tutors (NPT) clearly met the requirements of a practical course and adjusted their activities in response to the course's progress. NPTs were concerned about their tutees' attitudes and may need more professional support within the TtT program regarding this. Copyright © 2016 Elsevier GmbH. All rights reserved.

The Anatomy of Learning Anatomy

ERIC Educational Resources Information Center

Wilhelmsson, Niklas; Dahlgren, Lars Owe; Hult, Hakan; Scheja, Max; Lonka, Kirsti; Josephson, Anna

2010-01-01

The experience of clinical teachers as well as research results about senior medical students' understanding of basic science concepts has much been debated. To gain a better understanding about how this knowledge-transformation is managed by medical students, this work aims at investigating their ways of setting about learning anatomy.…

Wood anatomy and carbon-isotope discrimination support long-term hydraulic deterioration as a major cause of drought-induced dieback.

PubMed

Pellizzari, Elena; Camarero, J Julio; Gazol, Antonio; Sangüesa-Barreda, Gabriel; Carrer, Marco

2016-06-01

Hydraulic impairment due to xylem embolism and carbon starvation are the two proposed mechanisms explaining drought-induced forest dieback and tree death. Here, we evaluate the relative role played by these two mechanisms in the long-term by quantifying wood-anatomical traits (tracheid size and area of parenchyma rays) and estimating the intrinsic water-use efficiency (iWUE) from carbon isotopic discrimination. We selected silver fir and Scots pine stands in NE Spain with ongoing dieback processes and compared trees showing contrasting vigour (declining vs nondeclining trees). In both species earlywood tracheids in declining trees showed smaller lumen area with thicker cell wall, inducing a lower theoretical hydraulic conductivity. Parenchyma ray area was similar between the two vigour classes. Wet spring and summer conditions promoted the formation of larger lumen areas, particularly in the case of nondeclining trees. Declining silver firs presented a lower iWUE than conspecific nondeclining trees, but the reverse pattern was observed in Scots pine. The described patterns in wood anatomical traits and iWUE are coherent with a long-lasting deterioration of the hydraulic system in declining trees prior to their dieback. Retrospective quantifications of lumen area permit to forecast dieback in declining trees 2-5 decades before growth decline started. Wood anatomical traits provide a robust tool to reconstruct the long-term capacity of trees to withstand drought-induced dieback. © 2016 John Wiley & Sons Ltd.

Complementing anatomy education using three-dimensional anatomy mobile software applications on tablet computers.

PubMed

Lewis, T L; Burnett, B; Tunstall, R G; Abrahams, P H

2014-04-01

Anatomy has traditionally been a cornerstone of medical education, which has been taught via dissection and didactic lectures. The rising prevalence of mobile tablet technology means medical software applications ("apps") play an increasingly important role in medical education. The applications highlighted in this article will aid anatomical educators to identify which are the most useful in clinical, academic, and educational environments. These have been systematically identified by downloading all applications with keywords related to anatomy and then carrying out qualitative assessment. Novel anatomy applications from developers such as Visible Body, 3D4Medical, and Pocket Anatomy allow students to visualize and manipulate complex anatomical structures using detailed 3D models. They often contain additional content including clinical correlations and a range of media from instructional videos to interactive quiz functions. The strength of tablet technology lies in its ability to consolidate and present anatomical information to the user in the most appropriate manner for their learning style. The only question mark remains over the level of detail and accuracy of these applications. Innovative medical educators who embrace tablet technology will find that anatomy applications serve as a useful learning tool when used in conjunction with existing teaching setups. Copyright © 2013 Wiley Periodicals, Inc.

Effects of wood fiber characteristics on mechanical properties of wood/polypropylene composites

Treesearch

Nicole M. Stark; Robert E. Rowlands

2003-01-01

Commercial wood flour, the most common wood-derived filler for thermoplastics, is produced in a mixture of particle sizes and generally has a lower aspect ratio than wood and other natural fibers. To understand how wood flour and fiber characteristics influence the mechanical properties of polypropylene composites, we first investigated the effect of different sizes of...

Product distribution from pyrolysis of wood and agricultural residues

DOE Office of Scientific and Technical Information (OSTI.GOV)

Di Blasi, C.; Signorelli, G.; Di Russo, C.

1999-06-01

The pyrolysis characteristics of agricultural residues (wheat straw, olive husks, grape residues, and rice husks) and wood chips have been investigated on a bench scale. The experimental system establishes the conditions encountered by a thin (4 {times} 10{sup {minus}2} m diameter) packed bed of biomass particles suddenly exposed in a high-temperature environment, simulated by a radiant furnace. Product yields (gases, liquids, and char) and gas composition, measured for surface bed temperatures in the range 650--1000 K, reproduce trends already observed for wood. However, differences are quantitatively large. Pyrolysis of agricultural residues is always associated with much higher solid yields (upmore » to a factor of 2) and lower liquid yields. Differences are lower for the total gas, and approximate relationships exist among the ratios of the main gas species yields, indicating comparable activation energies for the corresponding apparent kinetics of formation. However, while the ratios are about the same for wood chips, rice husks, and straw, much lower values are shown by olive and grape residues. Large differences have also been found in the average values of the specific devolatilization rates. The fastest (up to factors of about 1.5 with respect to wood) have been observed for wheat straw and the slowest (up to factors of 2) for grape residues.« less

Wood energy-commercial applications

NASA Technical Reports Server (NTRS)

Kennel, R. P.

1978-01-01

Wood energy is being widely investigated in many areas of the country because of the many obvious benefits of wood fuel such as the low price per million Btus relative to coal, oil, and gas; the wide availability of noncommercial wood and the proven ability to harvest it; established technology which is reliable and free of pollution; renewable resources; better conservation for harvested land; and the potential for jobs creation. The Southeastern United States has a specific leadership role in wood energy based on its established forest products industry experience and the potential application of wood energy to other industries and institutions. Significant questions about the widespread usage of wood energy are being answered in demonstrations around the country as well as the Southeast in areas of wood storage and bulk handling; high capitalization costs for harvesting and combustion equipment; long term supply and demand contracts; and the economic feasibility of wood energy outside the forest products industry.

Effectiveness of a Radiographic Anatomy Software Application for Enhancing Learning of Veterinary Radiographic Anatomy.

PubMed

Reiter, Rachel; Viehdorfer, Matt; Hescock, Kimmy; Clark, Terri; Nemanic, Sarah

The goal of this study was to determine the effectiveness of an interactive radiology software application that we developed to enhance learning of normal canine radiographic anatomy. All first-year veterinary medical students were eligible to participate in this subject pre-test-post-test experimental design. When presented with the software application, all students had completed two terms of gross anatomy in which the complete anatomy of the dog had been taught using a combination of lectures and laboratory dissections, including radiographic examples. The software application was divided into four body regions: front limb, hind limb, skull/spine, and thorax/abdomen, each with a learning mode and a quiz mode. Quizzes were composed of 15 questions drawn pseudo-randomly without repeat from all structures within a region (median 206 structures). Students were initially given the software application with only the quiz mode activated. After completing four quizzes, one for each body region, students were given access to the software application with both learning mode and quiz mode activated. Students were instructed to spend 30 minutes using the learning mode to study the radiographic anatomy of each region and to retake each quiz. Quiz scores after using the learning mode were significantly higher for each body region (p<.001), with a large effect size for all four regions (Cohen's d=0.83-1.56). These results suggest that this radiographic anatomy software application is an effective tool for students to use to learn normal radiographic anatomy.

Improved understanding of human anatomy through self-guided radiological anatomy modules.

PubMed

Phillips, Andrew W; Smith, Sandy G; Ross, Callum F; Straus, Christopher M

2012-07-01

To quantifiably measure the impact of self-instructed radiological anatomy modules on anatomy comprehension, demonstrated by radiology, gross, and written exams. Study guides for independent use that emphasized structural relationships were created for use with two online radiology atlases. A guide was created for each module of the first year medical anatomy course and incorporated as an optional course component. A total of 93 of 96 eligible students participated. All exams were normalized to control for variances in exam difficulty and body region tested. An independent t-test was used to compare overall exam scores with respect to guide completion or incompletion. To account for aptitude differences between students, a paired t-test of each student's exam scores with and without completion of the associated guide was performed, thus allowing students to serve as their own controls. Twenty-one students completed no study guides; 22 completed all six guides; and 50 students completed between one and five guides. Aggregate comparisons of all students' exam scores showed significantly improved mean performance when guides were used (radiology, 57.8% [percentile] vs. 45.1%, P < .001; gross, 56.9% vs. 46.5%, P = .001; written, 57.8% vs. 50.2%, P = .011). Paired comparisons among students who completed between one and five guides demonstrated significantly higher mean practical exam scores when guides were used (radiology, 49.3% [percentile] vs. 36.0%, P = .001; gross, 51.5% vs. 40.4%, P = .005), but not higher written scores. Radiological anatomy study guides significantly improved anatomy comprehension on radiology, gross, and written exams. Copyright © 2012 AUR. Published by Elsevier Inc. All rights reserved.

Comprehensive genetic dissection of wood properties in a widely-grown tropical tree: Eucalyptus

PubMed Central

2011-01-01

Background Eucalyptus is an important genus in industrial plantations throughout the world and is grown for use as timber, pulp, paper and charcoal. Several breeding programmes have been launched worldwide to concomitantly improve growth performance and wood properties (WPs). In this study, an interspecific cross between Eucalyptus urophylla and E. grandis was used to identify major genomic regions (Quantitative Trait Loci, QTL) controlling the variability of WPs. Results Linkage maps were generated for both parent species. A total of 117 QTLs were detected for a series of wood and end-use related traits, including chemical, technological, physical, mechanical and anatomical properties. The QTLs were mainly clustered into five linkage groups. In terms of distribution of QTL effects, our result agrees with the typical L-shape reported in most QTL studies, i.e. most WP QTLs had limited effects and only a few (13) had major effects (phenotypic variance explained > 15%). The co-locations of QTLs for different WPs as well as QTLs and candidate genes are discussed in terms of phenotypic correlations between traits, and of the function of the candidate genes. The major wood property QTL harbours a gene encoding a Cinnamoyl CoA reductase (CCR), a structural enzyme of the monolignol-specific biosynthesis pathway. Conclusions Given the number of traits analysed, this study provides a comprehensive understanding of the genetic architecture of wood properties in this Eucalyptus full-sib pedigree. At the dawn of Eucalyptus genome sequence, it will provide a framework to identify the nature of genes underlying these important quantitative traits. PMID:21651758

Temporal Trend in Wood Dust Exposure During the Production of Wood Pellets.

PubMed

Eriksson, Kåre; Bryngelsson, Ing-Liss; Hagström, Katja

2017-05-01

Wood dust data collected in the production of wood pellets during 2001 to 2013 were evaluated to study a temporal trend in inhalation exposure. A linear mixed effects model of natural ln-transformed data was used to express the relative annual difference in inhalation wood dust exposure. There was an annual decrease of -20.5% of the geometric mean wood dust exposure during 2001 until 2013. The results were based on 617 inhalable dust samples collected at 14 different production units. The exposure to wood dust at the industrial premises investigated has decreased from a relatively high level of 6.4 mg m-3 in 2001 to 1.0 mg-3 in 2013. The Swedish Occupational Exposure Limit (SOEL) of 2 mg m-3 may still be exceeded. Analysis of the temporal trend in soft wood production units revealed declines in exposure of 20.5% per annum. It is important that precautions are taken to protect workers from a hazardous exposure to wood dust at the premises as the SOEL of 2 mg m-3 at some occasions is still exceeded. Additional measurements of wood dust exposure should be carried out on a regular basis in wood pellet production units in Sweden as well in other countries. © The Author 2017. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Virtual reality anatomy: is it comparable with traditional methods in the teaching of human forearm musculoskeletal anatomy?

PubMed

Codd, Anthony M; Choudhury, Bipasha

2011-01-01

The use of cadavers to teach anatomy is well established, but limitations with this approach have led to the introduction of alternative teaching methods. One such method is the use of three-dimensional virtual reality computer models. An interactive, three-dimensional computer model of human forearm anterior compartment musculoskeletal anatomy was produced using the open source 3D imaging program "Blender." The aim was to evaluate the use of 3D virtual reality when compared with traditional anatomy teaching methods. Three groups were identified from the University of Manchester second year Human Anatomy Research Skills Module class: a "control" group (no prior knowledge of forearm anatomy), a "traditional methods" group (taught using dissection and textbooks), and a "model" group (taught solely using e-resource). The groups were assessed on anatomy of the forearm by a ten question practical examination. ANOVA analysis showed the model group mean test score to be significantly higher than the control group (mean 7.25 vs. 1.46, P < 0.001) and not significantly different to the traditional methods group (mean 6.87, P > 0.5). Feedback from all users of the e-resource was positive. Virtual reality anatomy learning can be used to compliment traditional teaching methods effectively. Copyright © 2011 American Association of Anatomists.

Functional anatomy of the gibbon forelimb: adaptations to a brachiating lifestyle

PubMed Central

Michilsens, Fana; Vereecke, Evie E; D'Août, Kristiaan; Aerts, Peter

2009-01-01

It has been shown that gibbons are able to brachiate with very low mechanical costs. The conversion of muscle activity into smooth, purposeful movement of the limb depends on the morphometry of muscles and their mechanical action on the skeleton. Despite the gibbon's reputation for excellence in brachiation, little information is available regarding either its gross musculoskeletal anatomy or its more detailed muscle–tendon architecture. We provide quantitative anatomical data on the muscle–tendon architecture (muscle mass, physiological cross-sectional area, fascicle length and tendon length) of the forelimb of four gibbon species, collected by detailed dissections of unfixed cadavers. Data are compared between different gibbon species and with similar published data of non-brachiating primates such as macaques, chimpanzees and humans. No quantitative differences are found between the studied gibbon species. Both their forelimb anatomy and muscle dimensions are comparable when normalized to the same body mass. Gibbons have shoulder flexors, extensors, rotator muscles and elbow flexors with a high power or work-generating capacity and their wrist flexors have a high force-generating capacity. Compared with other primates, the elbow flexors of gibbons are particularly powerful, suggesting that these muscles are particularly important for a brachiating lifestyle. Based on this anatomical study, the shoulder flexors, extensors, rotator muscles, elbow flexors and wrist flexors are expected to contribute the most to brachiation. PMID:19519640

Impact of Anatomy Boot Camp on Students in a Medical Gross Anatomy Course

ERIC Educational Resources Information Center

Herling, Patrick J.; Mohseni, B. Tanya; Hill, Derek C.; Chelf, Stacy; Rickert, Jeffrey A.; Leo, Jonathan T.; Langley, Natalie R.

2017-01-01

Lincoln Memorial University-DeBusk College of Osteopathic Medicine (LMU-DCOM) offers an optional three-week summer Anatomy Boot Camp course (ABC) to facilitate students' transition into medical school and promote retention of anatomy subject matter. The pre-matriculation program is a supplemental instruction course that utilizes a small group…

Wood preservative testing

Treesearch

Rebecca Ibach; Stan T. Lebow

2012-01-01

Most wood species used in commercial and residential construction have little natural biological durability and will suffer from biodeterioration when exposed to moisture. Historically, this problem has been overcome by treating wood for outdoor use with toxic wood preservatives. As societal acceptance of chemical use changes, there is continual pressure to develop and...

Wood Anatomy and Insect Defoliator Systems: Is there an anatomical response to sustained feeding by the western spruce budworm (Choristoneura occidentalis) on Douglas-fir (Pseudotusga menziesii)?

NASA Astrophysics Data System (ADS)

Axelson, Jodi; Gärtner, Holger; Alfaro, René; Smith, Dan

2013-04-01

), cell wall thickness (µm), lumen diameter (µm), and total cell width (µm) were measured. Preliminary results indicate that earlywood parameters remain quite stable during WSB outbreak, while latewood parameters such as secondary cell wall thickness and cell length undergo step shifts at the beginning and end of outbreaks. These parameters, tree-level data, and annual defoliation data will further be tested to determine if changes in stem wood anatomy during WSB outbreaks were statistically significant.

Combining wood anatomy and stable isotope variations in a 600-year multi-parameter climate reconstruction from Corsican black pine

NASA Astrophysics Data System (ADS)

Szymczak, Sonja; Hetzer, Timo; Bräuning, Achim; Joachimski, Michael M.; Leuschner, Hanns-Hubert; Kuhlemann, Joachim

2014-10-01

We present a new multi-parameter dataset from Corsican black pine growing on the island of Corsica in the Western Mediterranean basin covering the period AD 1410-2008. Wood parameters measured include tree-ring width, latewood width, earlywood width, cell lumen area, cell width, cell wall thickness, modelled wood density, as well as stable carbon and oxygen isotopes. We evaluated the relationships between different parameters and determined the value of the dataset for climate reconstructions. Correlation analyses revealed that carbon isotope ratios are influenced by cell parameters determining cell size, whereas oxygen isotope ratios are influenced by cell parameters determining the amount of transportable water in the xylem. A summer (June to August) precipitation reconstruction dating back to AD 1185 was established based on tree-ring width. No long-term trends or pronounced periods with extreme high/low precipitation are recorded in our reconstruction, indicating relatively stable moisture conditions over the entire time period. By comparing the precipitation reconstruction with a summer temperature reconstruction derived from the carbon isotope chronologies, we identified summers with extreme climate conditions, i.e. warm-dry, warm-wet, cold-dry and cold-wet. Extreme climate conditions during summer months were found to influence cell parameter characteristics. Cold-wet summers promote the production of broad latewood composed of wide and thin-walled tracheids, while warm-wet summers promote the production of latewood with small thick-walled cells. The presented dataset emphasizes the potential of multi-parameter wood analysis from one tree species over long time scales.

Polyphenolic profile as a useful tool to identify the wood used in wine aging.

PubMed

Sanz, Miriam; Fernández de Simón, Brígida; Cadahía, Estrella; Esteruelas, Enrique; Muñoz, Angel Ma; Hernández, Ma Teresa; Estrella, Isabel

2012-06-30

Although oak wood is the main material used in cooperage, other species are being considered as possible sources of wood for the production of wines and their derived products. In this work we have compared the phenolic composition of acacia (Robinia pseudoacacia), chestnut (Castanea sativa), cherry (Prunus avium) and ash (Fraxinus excelsior and F. americana) heartwoods, by using HPLC-DAD/ESI-MS/MS (some of these data have been showed in previous paper), as well as the changes that toasting intensity at cooperage produce in each polyphenolic profile. Before toasting, each wood shows a different and specific polyphenolic profile, with both qualitative and quantitative differences among them. Toasting notably changed these profiles, in general, proportionally to toasting intensity and led to a minor differentiation among species in toasted woods, although we also found phenolic markers in toasted woods. Thus, methyl syringate, benzoic acid, methyl vanillate, p-hydroxybenzoic acid, 3,4,5-trimethylphenol and p-coumaric acid, condensed tannins of the procyanidin type, and the flavonoids naringenin, aromadendrin, isosakuranetin and taxifolin will be a good tool to identify cherry wood. In acacia wood the chemical markers will be the aldehydes gallic and β-resorcylic and two not fully identified hydroxycinnamic compounds, condensed tannins of the prorobinetin type, and when using untoasted wood, dihydrorobinetin, and in toasted acacia wood, robinetin. In untoasted ash wood, the presence of secoiridoids, phenylethanoid glycosides, or di and oligolignols will be a good tool, especially oleuropein, ligstroside and olivil, together verbascoside and isoverbascoside in F. excelsior, and oleoside in F. americana. In toasted ash wood, tyrosol, syringaresinol, cyclolovil, verbascoside and olivil, could be used to identify the botanical origin. In addition, in ash wood, seasoned and toasted, neither hydrolysable nor condensed tannins were detected. Lastly, in chestnut wood, gallic

Wood Dust

Cancer.gov

Learn about wood dust, which can raise the risk of cancers of the paranasal sinuses and nasal cavity. High amounts of wood dust are produced in sawmills, and in the furniture-making, cabinet-making, and carpentry industries.

Wood Smoke

EPA Pesticide Factsheets

Smoke is made up of a complex mixture of gases and fine, microscopic particles produced when wood and other organic matter burn. The biggest health threat from wood smoke comes from fine particles (also called particulate matter).

Anatomy Education Environment Measurement Inventory: A Valid Tool to Measure the Anatomy Learning Environment

ERIC Educational Resources Information Center

Hadie, Siti Nurma Hanim; Hassan, Asma'; Ismail, Zul Izhar Mohd; Asari, Mohd Asnizam; Khan, Aaijaz Ahmed; Kasim, Fazlina; Yusof, Nurul Aiman Mohd; Manan@Sulong, Husnaida Abdul; Tg Muda, Tg Fatimah Murniwati; Arifin, Wan Nor; Yusoff, Muhamad Saiful Bahri

2017-01-01

Students' perceptions of the education environment influence their learning. Ever since the major medical curriculum reform, anatomy education has undergone several changes in terms of its curriculum, teaching modalities, learning resources, and assessment methods. By measuring students' perceptions concerning anatomy education environment,…

Biodeterioration of wood

Treesearch

Terry L. Highley

1999-01-01

Under proper conditions, wood will give centuries of service. However, if conditions exist that permit the development of wood-degrading organisms, protection must be provided during processing, merchandising, and use. The principal organisms that can degrade wood are fungi, insects, bacteria, and marine borers. Molds, most sapwood stains, and decay are caused by fungi...

Evaluation of physical changes in wood during colonization by Ceriporiopsis submervispora

Treesearch

Chris Hunt; Alex Wiedenhoeft; Eric Horn; Carl Houtman

2001-01-01

Mechanical, chemical, and light microscopic methods were used to observe wood cell wall changes during colonization by Ceriporiopsis submervispora. Maximum crushing load, dynamic mechanical analysis (DMA), and quantitative Simon’s staining were found to be the most useful methods for tracking biopulping action. MOE and loss modulus trended downward within 2 days of...

The mouse-human anatomy ontology mapping project.

PubMed

Hayamizu, Terry F; de Coronado, Sherri; Fragoso, Gilberto; Sioutos, Nicholas; Kadin, James A; Ringwald, Martin

2012-01-01

The overall objective of the Mouse-Human Anatomy Project (MHAP) was to facilitate the mapping and harmonization of anatomical terms used for mouse and human models by Mouse Genome Informatics (MGI) and the National Cancer Institute (NCI). The anatomy resources designated for this study were the Adult Mouse Anatomy (MA) ontology and the set of anatomy concepts contained in the NCI Thesaurus (NCIt). Several methods and software tools were identified and evaluated, then used to conduct an in-depth comparative analysis of the anatomy ontologies. Matches between mouse and human anatomy terms were determined and validated, resulting in a highly curated set of mappings between the two ontologies that has been used by other resources. These mappings will enable linking of data from mouse and human. As the anatomy ontologies have been expanded and refined, the mappings have been updated accordingly. Insights are presented into the overall process of comparing and mapping between ontologies, which may prove useful for further comparative analyses and ontology mapping efforts, especially those involving anatomy ontologies. Finally, issues concerning further development of the ontologies, updates to the mapping files, and possible additional applications and significance were considered. DATABASE URL: http://obofoundry.org/cgi-bin/detail.cgi?id=ma2ncit.

Two-Year Community: Human Anatomy Software Use in Traditional and Online Anatomy Laboratory Classes: Student-Perceived Learning Benefits

ERIC Educational Resources Information Center

Kuyatt, Brian L.; Baker, Jason D.

2014-01-01

This study evaluates the effectiveness of human anatomy software in face-to-face and online anatomy laboratory classes. Cognitive, affective, and psychomotor perceived learning was measured for students using Pearson Education's Practice Anatomy Laboratory 2.0 software. This study determined that student-perceived learning was significantly…

Anatomy: Spotlight on Africa

ERIC Educational Resources Information Center

Kramer, Beverley; Pather, Nalini; Ihunwo, Amadi O.

2008-01-01

Anatomy departments across Africa were surveyed regarding the type of curriculum and method of delivery of their medical courses. While the response rate was low, African anatomy departments appear to be in line with the rest of the world in that many have introduced problem based learning, have hours that are within the range of western medical…

Energy from wood

Treesearch

J.I. Zerbe

2004-01-01

In most developing countries wood and charcoal are the predominant fuels for preparation of food to maintain the quality of life that encompasses the majority of citizens. In many developing countries wood fuels are also important for small and medium size industries. Moreover, energy from wood continues to be important in industrial countries. In the USA biomass...

Wood thermoplastic composites

Treesearch

Daniel F. Caulfield; Craig Clemons; Roger M. Rowell

2010-01-01

The wood industry can expand into new sustainable markets with the formation of a new class of composites with the marriage of the wood industry and the plastics industry. The wood component, usually a flour or fiber, is combined with a thermoplastic to form an extrudable, injectable or thermoformable composite that can be used in many non-structural applications....

Mammographic phenotypes of breast cancer risk driven by breast anatomy

NASA Astrophysics Data System (ADS)

Gastounioti, Aimilia; Oustimov, Andrew; Hsieh, Meng-Kang; Pantalone, Lauren; Conant, Emily F.; Kontos, Despina

2017-03-01

Image-derived features of breast parenchymal texture patterns have emerged as promising risk factors for breast cancer, paving the way towards personalized recommendations regarding women's cancer risk evaluation and screening. The main steps to extract texture features of the breast parenchyma are the selection of regions of interest (ROIs) where texture analysis is performed, the texture feature calculation and the texture feature summarization in case of multiple ROIs. In this study, we incorporate breast anatomy in these three key steps by (a) introducing breast anatomical sampling for the definition of ROIs, (b) texture feature calculation aligned with the structure of the breast and (c) weighted texture feature summarization considering the spatial position and the underlying tissue composition of each ROI. We systematically optimize this novel framework for parenchymal tissue characterization in a case-control study with digital mammograms from 424 women. We also compare the proposed approach with a conventional methodology, not considering breast anatomy, recently shown to enhance the case-control discriminatory capacity of parenchymal texture analysis. The case-control classification performance is assessed using elastic-net regression with 5-fold cross validation, where the evaluation measure is the area under the curve (AUC) of the receiver operating characteristic. Upon optimization, the proposed breast-anatomy-driven approach demonstrated a promising case-control classification performance (AUC=0.87). In the same dataset, the performance of conventional texture characterization was found to be significantly lower (AUC=0.80, DeLong's test p-value<0.05). Our results suggest that breast anatomy may further leverage the associations of parenchymal texture features with breast cancer, and may therefore be a valuable addition in pipelines aiming to elucidate quantitative mammographic phenotypes of breast cancer risk.

Intraoperative microscope-mounted spectral domain optical coherence tomography for evaluation of retinal anatomy during macular surgery.

PubMed

Ray, Robin; Barañano, David E; Fortun, Jorge A; Schwent, Bryan J; Cribbs, Blaine E; Bergstrom, Chris S; Hubbard, G Baker; Srivastava, Sunil K

2011-11-01

To evaluate the use of microscope mounted spectral domain optical coherence tomography (SD-OCT) to detect changes in retinal anatomy during macular surgery. Retrospective, observational case series. We included 25 eyes of 24 consecutive patients who underwent SD-OCT during macular surgery. A retrospective review of operative techniques, outcomes, and imaging for all patients who underwent intraoperative microscope mounted SD-OCT during surgery for macular hole or epiretinal membrane (ERM) from April 2009 to April 2010 was performed. Qualitative and quantitative characteristics of intraoperative and postoperative changes in retinal anatomy were studied. Intraoperative change in macular hole dimensions and retinal thickness in patients with ERM owing to surgical manipulation measured using SD-OCT. Intraoperative SD-OCT from 13 eyes of 13 patients undergoing surgery for macular hole was reviewed. Two cases had images of suboptimal quality and were excluded. The remaining 11 eyes were subjected to quantitative analysis, which revealed stability of macular hole height and central hole diameter after internal limiting membrane (ILM) peeling, but an increase in the diameter of subretinal fluid under the macula in ten of 11 eyes (average 87% wider). Intraoperative imaging from 12 eyes of 11 patients undergoing surgery for ERM was analyzed. Quantitative analysis revealed an average increase of retinal thickness after ILM peel of <2%. Ten of 12 eyes developed a new subretinal hyporeflectance, which likely represents shallow detachment of the macula, after uncomplicated membrane peel. Use of intraoperative SD-OCT has provided new insight into the changes to retinal anatomy during macular surgery and may prove to be a useful tool for vitreoretinal surgery. Further study is warranted to determine whether intraoperative changes such as the creation of shallow retinal detachments during uncomplicated macular surgery affects visual recovery. Proprietary or commercial disclosure

A Measure of the Effectiveness of Incorporating 3D Human Anatomy into an Online Undergraduate Laboratory

ERIC Educational Resources Information Center

Hilbelink, Amy J.

2009-01-01

Results of a study designed to determine the effectiveness of implementing three-dimensional (3D) stereo images of a human skull in an undergraduate human anatomy online laboratory were gathered and analysed. Mental model theory and its applications to 3D relationships are discussed along with the research results. Quantitative results on 62 pairs…

Anatomy of the clitoris.

PubMed

O'Connell, Helen E; Sanjeevan, Kalavampara V; Hutson, John M

2005-10-01

We present a comprehensive account of clitoral anatomy, including its component structures, neurovascular supply, relationship to adjacent structures (the urethra, vagina and vestibular glands, and connective tissue supports), histology and immunohistochemistry. We related recent anatomical findings to the historical literature to determine when data on accurate anatomy became available. An extensive review of the current and historical literature was done. The studies reviewed included dissection and microdissection, magnetic resonance imaging (MRI), 3-dimensional sectional anatomy reconstruction, histology and immunohistochemical studies. The clitoris is a multiplanar structure with a broad attachment to the pubic arch and via extensive supporting tissue to the mons pubis and labia. Centrally it is attached to the urethra and vagina. Its components include the erectile bodies (paired bulbs and paired corpora, which are continuous with the crura) and the glans clitoris. The glans is a midline, densely neural, non-erectile structure that is the only external manifestation of the clitoris. All other components are composed of erectile tissue with the composition of the bulbar erectile tissue differing from that of the corpora. The clitoral and perineal neurovascular bundles are large, paired terminations of the pudendal neurovascular bundles. The clitoral neurovascular bundles ascend along the ischiopubic rami to meet each other and pass along the superior surface of the clitoral body supplying the clitoris. The neural trunks pass largely intact into the glans. These nerves are at least 2 mm in diameter even in infancy. The cavernous or autonomic neural anatomy is microscopic and difficult to define consistently. MRI complements dissection studies and clarifies the anatomy. Clitoral pharmacology and histology appears to parallel those of penile tissue, although the clinical impact is vastly different. Typical textbook descriptions of the clitoris lack detail and

Anatomies of Inequality: Considering the Emotional Cost of Aiming Higher for Marginalised, Mature Mothers Re-Entering Education

ERIC Educational Resources Information Center

Mannay, Dawn; Morgan, Melanie

2013-01-01

The "Anatomy of Economic Inequality in Wales" (2011) provides quantitative evidence for the pervasive nature of class-based inequalities in education, demonstrating that an individual in social housing is approximately 10 times less likely to be a graduate compared to those in other types of accommodation. This article moves beyond the…

Opinion of Pakistani physiotherapists/students about anatomy as a subject and method of teaching anatomy: a cross sectional survey.

PubMed

Khan, Muhammad Sikander Ghayas; ul Ain, Qurrat; Hussan, Syed Imtiaz; Basher, Salman; Iram, Humaira; Umar, Bilal

2015-02-01

To recognise and identify the importance of Anatomy as a subject for physiotherapists/students. The cross-sectional descriptive study was conducted from January to October 2011 at Riphah International University, Lahore, and comprised physiotherapists registered with Pakistan Physical Therapy Association and students pursuing undergraduate physiotherapy studies at the University. A survey proforma consisting of six questions was used for data collection which was analysed using SPSS 17. Of the 500 questionnaires distributed among physiotherapists and students, 286(57.2%) were collected back duly filled. Overall, 280(97.9%) respondents said Anatomy was important in physical therapy, 179(62.58%) said Anatomy was a difficult subject to retain knowledge of, 155 (54.38%) were of the view that only Clinical Anatomy should be studied, 204 (71.32%) were in favour of performing dissection, 259 (90.55%) found that teaching videos were essential for the study of Anatomy, and 89 (31.11%) believed Anatomy could be memorised by multiple readings. Despite being a difficult subject, Anatomy is an essential subject for medical professionals.

Allowable bending stresses of wood for use in portable wood ladders

Treesearch

Fred Werren

1975-01-01

A standard for portable wood ladders has been in effect since 1923, and has been revised several times since then. The most recent publication is "American National Standard Safety Standard for Portable Wood Ladders," A14.1-1975, from American National Standards Institute, Inc. Methods of arriving at allowable stresses for wood ladder parts have never been...

Anatomy learning styles and strategies among Jordanian and Malaysian medical students: the impact of culture on learning anatomy.

PubMed

Mustafa, Ayman G; Allouh, Mohammed Z; Mustafa, Intisar G; Hoja, Ibrahim M

2013-07-01

The study aims to investigate anatomy learning styles and strategies of Jordanian and Malaysian medical students at the Jordan University of Science and Technology. The study is a cross-sectional questionnaire-based study. Students' responses for the questionnaire were numerically coded, and the results were analyzed to reveal statistically significant differences between Jordanian and Malaysian students. The results showed that Jordanian medical students were less interested in using cadavers in learning anatomy than Malaysian medical students. However, similar to their Malaysian counterparts, they prefer to employ other tools to learn anatomy like plastinated models and Internet-based resources. In addition to the aforementioned tools, Malaysian students were more interested in using cross-sectional images and making their own revision cards. Both Jordanian and Malaysian medical students were more interested in learning anatomy through clinical cases, and by system rather than by region. Moreover, it was revealed that Jordanian medical students learn anatomy more efficiently when they formulate a general view of a particular topic. Both Jordanian and Malaysian medical students also relied on reciting definitions and memorizing facts to learn anatomy. The study also reported significant differences between Jordanian and Malaysian students' perspectives on learning anatomy. The findings of the study suggest that Jordanian and Malaysian medical students posses different cultures of learning. Jordanian anatomy instructors need to consider these different learning cultures when they prepare their instructional methods and teaching materials to fulfill the educational needs of their culturally diverse students.

Wood and society

Treesearch

Christopher D. Risbrudt

2005-01-01

Forests, and the wood they produce, have played an important role in human activity since before recorded history. Indeed, one of the first major innovations of humankind was utilizing fire, fueled by wood, for cooking and heating. It is very likely that early hominids used wood fires for cooking as long as 1.5 million years ago (Clark and Harris 1985). Clear evidence...

Micrandra inundata (Euphorbiaceae), a new species with unusual wood anatomy from black-water river banks in southern Venezuela

Treesearch

Paul E. Berry; Alex C. Wiedenhoeft

2004-01-01

Micrandra inundata is a distinctive new species adapted to seasonally flooded black-water river banks in southern Venezuela. Trees rarely exceed 10 m in height but have thick basal trunks composed of very lightweight wood. It has the smallest leaves and fruits of any known Micrandra species and appears to be most closely related to M. minor Benth. The botanical...

Clinical anatomy of the subserous layer: An amalgamation of gross and clinical anatomy.

PubMed

Yabuki, Yoshihiko

2016-05-01

The 1998 edition of Terminologia Anatomica introduced some currently used clinical anatomical terms for the pelvic connective tissue or subserous layer. These innovations persuaded the present author to consider a format in which the clinical anatomical terms could be reconciled with those of gross anatomy and incorporated into a single anatomical glossary without contradiction or ambiguity. Specific studies on the subserous layer were undertaken on 79 Japanese women who had undergone surgery for uterine cervical cancer, and on 26 female cadavers that were dissected, 17 being formalin-fixed and 9 fresh. The results were as follows: (a) the subserous layer could be segmentalized by surgical dissection in the perpendicular, horizontal and sagittal planes; (b) the segmentalized subserous layer corresponded to 12 cubes, or ligaments, of minimal dimension that enabled the pelvic organs to be extirpated; (c) each ligament had a three-dimensional (3D) structure comprising craniocaudal, mediolateral, and dorsoventral directions vis-á-vis the pelvic axis; (d) these 3D-structured ligaments were encoded morphologically in order of decreasing length; and (e) using these codes, all the surgical procedures for 19th century to present-day radical hysterectomy could be expressed symbolically. The establishment of clinical anatomical terms, represented symbolically through coding as demonstrated in this article, could provide common ground for amalgamating clinical anatomy with gross anatomy. Consequently, terms in clinical anatomy and gross anatomy could be reconciled and compiled into a single anatomical glossary. © 2015 Wiley Periodicals, Inc.

Floods and Fluvial Wood

NASA Astrophysics Data System (ADS)

Comiti, F.

2014-12-01

Several studies have recently addressed the complex interactions existing at various spatial scales among riparian vegetation, channel morphology and wood storage. The majority of these investigations has been carried out in relatively natural river systems, focusing mostly on the long-term vegetation-morphology dynamics under "equilibrium" conditions. Little is still known about the role of flood events - of different frequency/magnitude - on several aspects of such dynamics, e.g. entrainment conditions of in-channel wood, erosion rates of vegetation from channel margins and from islands, transport distances of wood elements of different size along the channel network. Even less understood is how the river's evolutionary trajectory may affect these processes, and thus the degree to which conceptual models derivable from near-natural systems could be applicable to human-disturbed channels. Indeed, the different human pressures - present on most river basins worldwide - have greatly impaired the morphological and ecological functions of fluvial wood, and the attempts to "restore" in-channel wood storage are currently carried out without a sufficient understanding of wood transport processes occurring during floods. On the other hand, the capability to correctly predict the magnitude of large wood transport during large floods is now seen as crucial - especially in mountain basins - for flood hazard mapping, as is the identification of the potential wood sources (e.g. landslides, floodplains, islands) for the implementation of sound and effective hazard mitigation measures. The presentation will first summarize the current knowledge on fluvial wood dynamics and modelling at different spatial and temporal scales, with a particular focus on mountain rivers. The effects of floods of different characteristics on vegetation erosion and wood transport will be then addressed presenting some study cases from rivers in the European Alps and in the Italian Apennines featuring

A Jurassic wood providing insights into the earliest step in Ginkgo wood evolution.

PubMed

Jiang, Zikun; Wang, Yongdong; Philippe, Marc; Zhang, Wu; Tian, Ning; Zheng, Shaolin

2016-12-16

The fossil record of Ginkgo leaf and reproductive organs has been well dated to the Mid-Jurassic (170 Myr). However, the fossil wood record that can safely be assigned to Ginkgoales has not yet been reported from strata predating the late Early Cretaceous (ca. 100 Myr). Here, we report a new fossil wood from the Mid-Late Jurassic transition deposit (153-165 Myr) of northeastern China. The new fossil wood specimen displays several Ginkgo features, including inflated axial parenchyma and intrusive tracheid tips. Because it is only slightly younger than the oldest recorded Ginkgo reproductive organs (the Yima Formation, 170 Myr), this fossil wood very probably represents the oldest bona fide fossil Ginkgo wood and the missing ancestral form of Ginkgo wood evolution.

A Jurassic wood providing insights into the earliest step in Ginkgo wood evolution

NASA Astrophysics Data System (ADS)

Jiang, Zikun; Wang, Yongdong; Philippe, Marc; Zhang, Wu; Tian, Ning; Zheng, Shaolin

2016-12-01

The fossil record of Ginkgo leaf and reproductive organs has been well dated to the Mid-Jurassic (170 Myr). However, the fossil wood record that can safely be assigned to Ginkgoales has not yet been reported from strata predating the late Early Cretaceous (ca. 100 Myr). Here, we report a new fossil wood from the Mid-Late Jurassic transition deposit (153-165 Myr) of northeastern China. The new fossil wood specimen displays several Ginkgo features, including inflated axial parenchyma and intrusive tracheid tips. Because it is only slightly younger than the oldest recorded Ginkgo reproductive organs (the Yima Formation, 170 Myr), this fossil wood very probably represents the oldest bona fide fossil Ginkgo wood and the missing ancestral form of Ginkgo wood evolution.

Henry Gray's Anatomy.

PubMed

Pearce, J M S

2009-04-01

Little is generally known of Henry Gray, the author of Gray's Anatomy, and even less of his colleague Henry Vandyke Carter, who played a vital role in the dissections and illustrations leading to the production of the first volume in 1859. This essay attempts to sketch briefly the salient, know aspects of these two men and their divergent careers. It traces succinctly the subsequent fate of the unique anatomy book that has influenced and instructed almost every student of medicine. (c) 2009 Wiley-Liss, Inc.

[Assessment of occupational exposure to wood dust in the Polish furniture industry].

PubMed

Szewczyńska, Małgorzata; Pośniak, Małgorzata

2017-02-28

Occupational exposure to wood dust can be responsible for many different harmful health effects, especially in workers employed in the wood industry. The assessment of wood dust adverse effects to humans, as well as the interpretation of its concentration measurements carried out to assess potential occupational exposure are very difficult. First of all, it is due to possible occurrence of different kind of wood dust in the workplace air, namely wood dust from dozens of species of trees belonging to 2 kinds of botanical gymnosperms and angiosperms, as well as to its different chemical composition. Total dust and respirable wood dust in the workplace air in the furniture industry was determined using the filtration-gravimetric method in accordance with Polish Standards PN-Z-04030-05:1991 and PN-Z-04030-06:1991. Air samples were collected based on the principles of individual dosimetry. Total dust concentrations were 0.84-13.92 mg/m³ and inhalable fraction concentrations, obtained after the conversion of total dust by applying a conversion factor of 1.59, were 1.34-22.13 mg/m³. Respirable fraction concentrations were 0.38-4.04 mg/m³, which makes approx. 25% of the inhalable fraction on average. The highest concentrations occurred in grinding and the lowest during milling processes of materials used in the manufacture of furniture. The results indicate that the share of respirable fraction in the inhalable fraction of wood dust is considerable. Due to the determination of the threshold limit value (TLV) for the inhalable fraction of wood dust, it is necessary to replace the previously used samplers for total dust with samplers that provide quantitative separation of wood dust inhalable fractions in accordance with the convention of this fraction as defined in PN-EN 481:1998. Med Pr 2017;68(1):45-60. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Anatomy adventure: a board game for enhancing understanding of anatomy.

PubMed

Anyanwu, Emeka G

2014-01-01

Certain negative factors such as fear, loss of concentration and interest in the course, lack of confidence, and undue stress have been associated with the study of anatomy. These are factors most often provoked by the unusually large curriculum, nature of the course, and the psychosocial impact of dissection. As a palliative measure, Anatomy Adventure, a board game on anatomy was designed to reduce some of these pressures, emphasize student centered and collaborative learning styles, and add fun to the process of learning while promoting understanding and retention of the subject. To assess these objectives, 95 out of over 150 medical and dental students who expressed willingness to be part of the study were recruited and divided into a Game group and a Non-game group. A pretest written examination was given to both groups, participants in the Game group were allowed to play the game for ten days, after which a post-test examination was also given. A 20-item questionnaire rated on a three-point scale to access student's perception of the game was given to the game group. The post-test scores of the game group were significantly higher (P < 0.05) than those of the non-game counterparts. Also the post-test score of the game based group was significantly better (P < 0.05) than their pretest. The students in their feedback noted in very high proportions that the game was interesting, highly informative, encouraged team work, improved their attitude, and perception to gross anatomy. © 2013 American Association of Anatomists.

Structure and function of wood

Treesearch

Alex C. Wiedenhoeft; Regis B. Miller

2005-01-01

Despite the many human uses to which various woods are suited, at a fundamental level wood is a complex biological structure, itself a composite of many chemistries and cell types acting together to serve the needs of the plant. Although humans have striven to understand wood in the context of wood technology, we have often overlooked the key and basic fact that wood...

Many Roles of Wood Adhesives

Treesearch

Charles R. Frihart

2014-01-01

Although wood bonding is one of the oldest applications of adhesives, going back to early recorded history (1), some aspects of wood bonds are still not fully understood. Most books in the general area of adhesives and adhesion do not cover wood bonding. However, a clearer understanding of wood bonding and wood adhesives can lead to improved products. This is important...

Wood Substitutes; A Base Syllabus on Wood Technology.

ERIC Educational Resources Information Center

Eastern Kentucky Univ., Richmond.

This curriculum guide is for use by college instructors concerned with expanding traditional woodworking programs. It was developed in a National Defense Education Act summer institute and is based on an outline provided by members of a previous institute. The content concerns wood substitutes which are made to resemble wood and are often used…

Student perceptions of independent versus facilitated small group learning approaches to compressed medical anatomy education.

PubMed

Whelan, Alexander; Leddy, John J; Mindra, Sean; Matthew Hughes, J D; El-Bialy, Safaa; Ramnanan, Christopher J

2016-01-01

The purpose of this study was to compare student perceptions regarding two, small group learning approaches to compressed (46.5 prosection-based laboratory hours), integrated anatomy education at the University of Ottawa medical program. In the facilitated active learning (FAL) approach, tutors engage students and are expected to enable and balance both active learning and progression through laboratory objectives. In contrast, the emphasized independent learning (EIL) approach stresses elements from the "flipped classroom" educational model: prelaboratory preparation, independent laboratory learning, and limited tutor involvement. Quantitative (Likert-style questions) and qualitative data (independent thematic analysis of open-ended commentary) from a survey of students who had completed the preclerkship curriculum identified strengths from the EIL (promoting student collaboration and communication) and FAL (successful progression through objectives) approaches. However, EIL led to student frustration related to a lack of direction and impaired completion of objectives, whereas active learning opportunities in FAL were highly variable and dependent on tutor teaching style. A "hidden curriculum" was also identified, where students (particularly EIL and clerkship students) commonly compared their compressed anatomy education or their anatomy learning environment with other approaches. Finally, while both groups highly regarded the efficiency of prosection-based learning and expressed value for cadaveric-based learning, student commentary noted that the lack of grade value dedicated to anatomy assessment limited student accountability. This study revealed critical insights into small group learning in compressed anatomy education, including the need to balance student active learning opportunities with appropriate direction and feedback (including assessment). © 2015 American Association of Anatomists.

Quantification of human upper extremity nerves and fascicular anatomy.

PubMed

Brill, Natalie A; Tyler, Dustin J

2017-09-01

In this study we provide detailed quantification of upper extremity nerve and fascicular anatomy. The purpose is to provide values and trends in neural features useful for clinical applications and neural interface device design. Nerve cross-sections were taken from 4 ulnar, 4 median, and 3 radial nerves from 5 arms of 3 human cadavers. Quantified nerve features included cross-sectional area, minor diameter, and major diameter. Fascicular features analyzed included count, perimeter, area, and position. Mean fascicular diameters were 0.57 ± 0.39, 0.6 ± 0.3, 0.5 ± 0.26 mm in the upper arm and 0.38 ± 0.18, 0.47 ± 0.18, 0.4 ± 0.27 mm in the forearm of ulnar, median, and radial nerves, respectively. Mean fascicular diameters were inversely proportional to fascicle count. Detailed quantitative anatomy of upper extremity nerves is a resource for design of neural electrodes, guidance in extraneural procedures, and improved neurosurgical planning. Muscle Nerve 56: 463-471, 2017. © 2016 Wiley Periodicals, Inc.

New views on antidiarrheal effect of wood creosote: is wood creosote really a gastrointestinal antiseptic?

PubMed

Ataka, Koji; Ito, Masafumi; Shibata, Takashi

2005-12-01

Wood creosote, the principal ingredient in Seirogan, has a long history as a known gastrointestinal microbicidal agent. When administered orally, the intraluminal concentration of wood creosote is not sufficiently high to achieve this microbicidal effect. Through further animal tests, we have shown that antimotility and antisecretory actions are the principal antidiarrheal effects of wood creosote. Wood creosote inhibits intestinal secretion induced by enterotoxins by blocking the Cl(-) channel on the intestinal epithelium. Wood creosote also decreases intestinal motility accelerated by mechanical, chemical, or electrical stimulus by the inhibition of the Ca(2+) influx into the smooth muscle cells. In this overview, the antimotility and antisecretory effects of wood creosote are compared with those of loperamide. Wood creosote was observed to inhibit stimulated colonic motility, but not normal jejunal motility. Loperamide inhibits normal jejunal motility, but not stimulated colonic motility. Both wood creosote and loperamide inhibit intestinal secretion accelerated by acetylcholine. Wood creosote was found to have greater antisecretory effects in the colon than loperamide. Based upon these findings, we conclude that the antidiarrheal effects of wood creosote are due to both antisecretory activity in the intestine and antimotility in the colon, but not due to the microbicidal activity as previously thought. Wood creosote was found to have no effects on normal intestinal activity. These conclusions are supported by the results of a recent clinical study comparing wood creosote and loperamide, which concluded that wood creosote was more efficacious in relieving abdominal pain and comparable to loperamide in relieving diarrhea.

Characterization of wood mulch and leachate/runoff from three wood recycling facilities.

PubMed

Kannepalli, Sarat; Strom, Peter F; Krogmann, Uta; Subroy, Vandana; Giménez, Daniel; Miskewitz, Robert

2016-11-01

Large-scale open storage of wood mulch is common practice at wood recycling facilities. During rain and snow melt, leachate with soluble compounds and suspended particles is released from mulch stockpiles. The objective of this study was to determine the quality of leachate/runoff from wood recycling facilities to evaluate its potential to contaminate receiving waterbodies. Wood mulch (n = 30) and leachate/runoff (n = 26) samples were collected over 1.5 years from three wood recycling facilities in New Jersey, USA. Differences by site were found (p < 0.05) for most of the 21 constituents tested in the solid wood mulch samples. Biochemical oxygen demand (range <20-3000 mg/L), chemical oxygen demand (134-6000 mg/L) and total suspended solids (69-401 mg/L) median concentrations of the leachate/runoff samples were comparable to those of untreated domestic wastewater. Total Kjeldahl N, total P and fecal coliform median values were slightly lower than typical wastewater values. Dose-response studies with leachate/runoff samples using zebrafish (Danio rerio) embryos showed that mortality and developmental defects typically did not occur even at the highest concentration tested, indicating low toxicity, although delayed development did occur. Based on this study, leachate/runoff from wood recycling facilities should not be released to surface waters as it is a potential source of organic contamination and low levels of nutrients. A study in which runoff from a controlled drainage area containing wood mulch of known properties is monitored would allow for better assessment of the potential impact of stormwater runoff from wood recycling facilities. Copyright © 2016 Elsevier Ltd. All rights reserved.

Wood formation and the concept of wood quality

Treesearch

Philip R. Larson

1969-01-01

Wood has been the principal product of trees from the first hunting club or digging tool of ancient man to the rich variety of industrial and decorative uses of modern civilization. The universal practical value and aesthetic appeal of wood may be traced to the seemingly infinite variation in its characteristics. These variations arise from the structure and...

Combustion characteristics of lodge pole pine wood chips. Technical progress report No. 15, September 16, 1978-September 15, 1979

DOE Office of Scientific and Technical Information (OSTI.GOV)

Junge, D.C.

1979-09-01

Significant quantits of wood resiue fuels are presently being used in industrial steam generating facilities. Recent studies indicate that substantial additional quantities of wood residue fuels are available for energy generation in the form of steam and/or electricity. A limited data base on the combustion characteristics of wood residue fuels has resulted in the installation and operation of inefficient combustion systems for these fuels. This investigation of the combustion characteristics of wood residue fuels was undertaken to provide a data base which could be used to optimize the combustion of such fuels. Optimization of the combustion process in industrial boilersmore » serves to improve combustion efficiency and to reduce air pollutant emissions generated in the combustion process. This report presents data on the combustion characteristics of lodge pole pine wood chips. The data were obtained in a pilot scale combustion test facility at Oregon State University.« less

Wood-boring beetles in homes

Treesearch

V.R. Lewis; S.J. Seybold

2010-01-01

Three groups of wood-boring beetles—powderpost, deathwatch, and false powderpost (Table 1)—invade and damage wood furniture as well as structural and decorative wood inside of buildings. The beetle larvae feed in and do most of the damage to wood, and when they reach the adult stage, they emerge through round exit holes, which they create by chewing through the wood...

Health Instruction Packages: Cardiac Anatomy.

ERIC Educational Resources Information Center

Phillips, Gwen; And Others

Text, illustrations, and exercises are utilized in these five learning modules to instruct nurses, students, and other health care professionals in cardiac anatomy and functions and in fundamental electrocardiographic techniques. The first module, "Cardiac Anatomy and Physiology: A Review" by Gwen Phillips, teaches the learner to draw…

Curriculum Guidelines for Gross Anatomy.

ERIC Educational Resources Information Center

Journal of Dental Education, 1993

1993-01-01

The American Association of Dental Schools' revised guidelines on curricula for gross anatomy suggest percentages of effort and time devoted to curricular areas, offer a rationale for anatomy instruction, note primary educational goals and prerequisites, outline content, and make recommendations for sequencing. Appropriate faculty and facilities…

Weathering Characteristics of Wood Plastic Composites Reinforced with Extracted or Delignified Wood Flour

PubMed Central

Chen, Yao; Stark, Nicole M.; Tshabalala, Mandla A.; Gao, Jianmin; Fan, Yongming

2016-01-01

This study investigated weathering performance of an HDPE wood plastic composite reinforced with extracted or delignified wood flour (WF). The wood flour was pre-extracted with three different solvents, toluene/ethanol (TE), acetone/water (AW), and hot water (HW), or sodium chlorite/acetic acid. The spectral properties of the composites before and after artificial weathering under accelerated conditions were characterized by Fourier transform infrared (FTIR) spectroscopy, the surface color parameters were analyzed using colorimetry, and the mechanical properties were determined by a flexural test. Weathering of WPC resulted in a surface lightening and a decrease in wood index (wood/HDPE) and flexural strength. WPCs that were reinforced with delignified wood flour showed higher ΔL* and ΔE* values, together with lower MOE and MOR retention ratios upon weathering when compared to those with non-extracted control and extracted WF. PMID:28773732

Anatomy education environment measurement inventory: A valid tool to measure the anatomy learning environment.

PubMed

Hadie, Siti Nurma Hanim; Hassan, Asma'; Ismail, Zul Izhar Mohd; Asari, Mohd Asnizam; Khan, Aaijaz Ahmed; Kasim, Fazlina; Yusof, Nurul Aiman Mohd; Manan Sulong, Husnaida Abdul; Tg Muda, Tg Fatimah Murniwati; Arifin, Wan Nor; Yusoff, Muhamad Saiful Bahri

2017-09-01

Students' perceptions of the education environment influence their learning. Ever since the major medical curriculum reform, anatomy education has undergone several changes in terms of its curriculum, teaching modalities, learning resources, and assessment methods. By measuring students' perceptions concerning anatomy education environment, valuable information can be obtained to facilitate improvements in teaching and learning. Hence, it is important to use a valid inventory that specifically measures attributes of the anatomy education environment. In this study, a new 11-factor, 132-items Anatomy Education Environment Measurement Inventory (AEEMI) was developed using Delphi technique and was validated in a Malaysian public medical school. The inventory was found to have satisfactory content evidence (scale-level content validity index [total] = 0.646); good response process evidence (scale-level face validity index [total] = 0.867); and acceptable to high internal consistency, with the Raykov composite reliability estimates of the six factors are in the range of 0.604-0.876. The best fit model of the AEEMI is achieved with six domains and 25 items (X 2  = 415.67, P < 0.001, ChiSq/df = 1.63, RMSEA = 0.045, GFI = 0.905, CFI = 0.937, NFI = 0.854, TLI = 0.926). Hence, AEEMI was proven to have good psychometric properties, and thus could be used to measure the anatomy education environment in Malaysia. A concerted collaboration should be initiated toward developing a valid universal tool that, using the methods outlined in this study, measures the anatomy education environment across different institutions and countries. Anat Sci Educ 10: 423-432. © 2017 American Association of Anatomists. © 2017 American Association of Anatomists.

External and internal anatomy of mandibular molars.

PubMed

Rocha, L F; Sousa Neto, M D; Fidel, S R; da Costa, W F; Pécora, J D

1996-01-01

The external and internal anatomy of 628 extracted, mandibular first and second molars was studied. The external anatomy was studied by measuring each tooth and by observing the direction of the root curvatures from the facial surface. The internal anatomy of the pulp cavity was studied by a method of making the teeth translucent.

Papilian's anatomy - celebrating six decades.

PubMed

Dumitraşcu, Dinu Iuliu; Crivii, Carmen Bianca; Opincariu, Iulian

2017-01-01

Victor Papilian was born an artist, during high school he studied music in order to become a violinist in two professional orchestras in Bucharest. Later on he enrolled in the school of medicine, being immediately attracted by anatomy. After graduating, with a briliant dissertation, he became a member of the faculty and continued to teach in his preferred field. His masters, Gh. Marinescu and Victor Babes, proposed him for the position of professor at the newly established Faculty of Medicine of Cluj. Here he reorganized the department radically, created an anatomy museum and edited the first dissection handbook and the first Romanian anatomy (descriptive and topographic) treatise, both books received with great appreciation. He received the Romanian Academy Prize. His knowledge and skills gained him a well deserved reputation and he created a prestigious school of anatomy. He published over 250 scientific papers in national and international journals, ranging from morphology to functional, pathological and anthropological topics. He founded the Society of Anthropology, with its own newsletter; he was elected as a member of the French Society of Anatomy. In parallel he had a rich artistic and cultural activity as writer and playwright: he was president of the Transylvanian Writers' Society, editor of a literary review, director of the Cluj theater and opera, leader of a book club and founder of a symphony orchestra.

Relevance of human anatomy in daily clinical practice.

PubMed

Arráez-Aybar, Luis-Alfonso; Sánchez-Montesinos, Indalecio; Mirapeix, Rosa-M; Mompeo-Corredera, Blanca; Sañudo-Tejero, Jose-Ramón

2010-12-20

the aim of this study has been to evaluate the relevance of gross human anatomy in daily clinical practice and to compare it to that of other basic sciences (biochemistry, bioethics, cytohistology, microbiology, pharmacology, physiology, psychology). a total of 1250 questionnaires were distributed among 38 different medical speciality professionals. Answers were analyzed taking into account speciality (medical, surgery and others), professional status (training physician or staff member) and professional experience. the response rate was 42.9% (n=536). Gross human anatomy was considered the most relevant basic discipline for surgical specialists, while pharmacology and physiology were most relevant for medical specialists. Knowledge of anatomy was also considered fundamental for understanding neurological or musculoskeletal disorders. In undergraduate programmes, the most important focuses in teaching anatomy were radiological, topographical and functional anatomy followed by systematic anatomy. In daily medical practice anatomy was considered basic for physical examination, symptom interpretation and interpretation of radiological images. When professional status or professional experience was considered, small variations were shown and there were no significant differences related to gender or community. our results underline the relevance of basic sciences (gross anatomy, physiology, and pharmacology) in daily professional activity. Evidence-based studies such as ours, lend greater credibility and objectivity to the role of gross anatomy in the undergraduate training of health professionals and should help to establish a more appropriate curriculum for future professionals. 2010 Elsevier GmbH. All rights reserved.

Locomotion and basicranial anatomy in primates and marsupials.

PubMed

Villamil, Catalina I

2017-10-01

There is ongoing debate in paleoanthropology about whether and how the anatomy of the cranium, and especially the cranial base, is evolving in response to locomotor and postural changes. However, the majority of studies focus on two-dimensional data, which fails to capture the complexity of cranial anatomy. This study tests whether three-dimensional cranial base anatomy is linked to locomotion or to other factors in primates (n = 473) and marsupials (n = 231). Results indicate that although there is a small effect of locomotion on cranial base anatomy in primates, this is not the case in marsupials. Instead, facial anatomy likely drives variation in cranial base anatomy in both primates and marsupials, with additional roles for body size and brain size. Although some changes to foramen magnum position and orientation are phylogenetically useful among the hominoids, they do not necessarily reflect locomotion or positional behavior. The interplay between locomotion, posture, and facial anatomy in primates requires further investigation. Copyright © 2017 Elsevier Ltd. All rights reserved.

What Do the Public Know about Anatomy? Anatomy Education to the Public and the Implications

ERIC Educational Resources Information Center

Taylor, Adam M.; Diggle, Peter; Wessels, Quenton

2018-01-01

Public knowledge of the anatomical "self" is lacking and evidence points towards a growing need for anatomy education to the wider public. The public were offered the opportunity to learn human anatomy and complete an anatomical knowledge survey afterwards. Sixty-three participants volunteered to attempt to place 20 anatomical structures…

Wood preservation

Treesearch

Rebecca E. Ibach

1999-01-01

When left untreated in many outdoor applications, wood becomes subject to degradation by a variety of natural causes. Although some trees possess naturally occurring resistance to decay (Ch. 3, Decay Resistance), many are in short supply or are not grown in ready proximity to markets. Because most commonly used wood species, such as Southern Pine, ponderosa pine, and...

The use of new, aqueous chemical wood modifications to improve the durability of wood-plastic composites

Treesearch

Rebecca E. Ibach; Craig M. Clemons; George C. Chen

2017-01-01

The wood flour used in wood-plastic composites (WPCs) can biologically deteriorate and thus the overall mechanical performance of WPCs decrease when exposed to moisture and fungal decay. Protecting the wood flour by chemical modification can improve the durability of the wood in a nontoxic way so it is not harmful to the environment. WPCs were made with modified wood...

Bioprocessing preservative-treated waste wood

Treesearch

Barbara L. Illman; Vina W. Yang; Les Ferge

2000-01-01

Disposal of preservative-treated waste wood is a growing problem worldwide. Bioprocessing the treated wood offers one approach to waste management under certain conditions. One goal is to use wood decay fungi to reduce the volume of waste with an easily managed system in a cost-effective manner. Wood decay fungi were obtained from culture collections in the Mycology...

Functional Multi-Locus QTL Mapping of Temporal Trends in Scots Pine Wood Traits

PubMed Central

Li, Zitong; Hallingbäck, Henrik R.; Abrahamsson, Sara; Fries, Anders; Gull, Bengt Andersson; Sillanpää, Mikko J.; García-Gil, M. Rosario

2014-01-01

Quantitative trait loci (QTL) mapping of wood properties in conifer species has focused on single time point measurements or on trait means based on heterogeneous wood samples (e.g., increment cores), thus ignoring systematic within-tree trends. In this study, functional QTL mapping was performed for a set of important wood properties in increment cores from a 17-yr-old Scots pine (Pinus sylvestris L.) full-sib family with the aim of detecting wood trait QTL for general intercepts (means) and for linear slopes by increasing cambial age. Two multi-locus functional QTL analysis approaches were proposed and their performances were compared on trait datasets comprising 2 to 9 time points, 91 to 455 individual tree measurements and genotype datasets of amplified length polymorphisms (AFLP), and single nucleotide polymorphism (SNP) markers. The first method was a multilevel LASSO analysis whereby trend parameter estimation and QTL mapping were conducted consecutively; the second method was our Bayesian linear mixed model whereby trends and underlying genetic effects were estimated simultaneously. We also compared several different hypothesis testing methods under either the LASSO or the Bayesian framework to perform QTL inference. In total, five and four significant QTL were observed for the intercepts and slopes, respectively, across wood traits such as earlywood percentage, wood density, radial fiberwidth, and spiral grain angle. Four of these QTL were represented by candidate gene SNPs, thus providing promising targets for future research in QTL mapping and molecular function. Bayesian and LASSO methods both detected similar sets of QTL given datasets that comprised large numbers of individuals. PMID:25305041

LCA-based optimization of wood utilization under special consideration of a cascading use of wood.

PubMed

Höglmeier, Karin; Steubing, Bernhard; Weber-Blaschke, Gabriele; Richter, Klaus

2015-04-01

Cascading, the use of the same unit of a resource in multiple successional applications, is considered as a viable means to improve the efficiency of resource utilization and to decrease environmental impacts. Wood, as a regrowing but nevertheless limited and increasingly in demand resource, can be used in cascades, thereby increasing the potential efficiency per unit of wood. This study aims to assess the influence of cascading wood utilization on optimizing the overall environmental impact of wood utilization. By combining a material flow model of existing wood applications - both for materials provision and energy production - with an algebraic optimization tool, the effects of the use of wood in cascades can be modelled and quantified based on life cycle impact assessment results for all production processes. To identify the most efficient wood allocation, the effects of a potential substitution of non-wood products were taken into account in a part of the model runs. The considered environmental indicators were global warming potential, particulate matter formation, land occupation and an aggregated single score indicator. We found that optimizing either the overall global warming potential or the value of the single score indicator of the system leads to a simultaneous relative decrease of all other considered environmental impacts. The relative differences between the impacts of the model run with and without the possibility of a cascading use of wood were 7% for global warming potential and the single score indicator, despite cascading only influencing a small part of the overall system, namely wood panel production. Cascading led to savings of up to 14% of the annual primary wood supply of the study area. We conclude that cascading can improve the overall performance of a wood utilization system. Copyright © 2015 Elsevier Ltd. All rights reserved.

Wood adhesion and adhesives

Treesearch

Charles R. Frihart

2005-01-01

An appreciation of rheology, material science, organic chemistry, polymer science, and mechanics leads to better understanding of the factors controlling the performance of the bonded assemblies. Given the complexity of wood as a substrate, it is hard to understand why some wood adhesives work better than other wood adhesives, especially when under the more severe...

[Quantification of Wood Flour and Polypropylene in Chinese Fir/Polypropylene Composites by FTIR].

PubMed

Lao, Wan-li; Li, Gai-yun; Zhou, Qun; Qin, Te-fu

2015-06-01

The ratio of wood and plastic in Wood Plastic Composites (WPCss) influences quality and price, but traditional thermochemical methods cannot rapidly and accurately quantify the ratio of wood/PP in WPCss. This paper was addressed to investigate the feasibility of quantifying the wood flour content and plastic content in WPCss by Fourier Transform Infrared (FTIR) spectroscopy. With Chinese fir, polypropylene (PP) and other additives as raw materials, 13 WPCs samples with different wood flour contents, ranging from 9.8% to 61.5%, were prepared by modifying wood flour, mixing materials and extrusion pelletizing. The samples were analyzed by FTIR with the KBr pellets technique. The absorption peaks of WPCss at 1059, 1 033 and 1 740 cm(-1) are considered as characteristic of Chinese fir, and the absorption peaks at 1 377, 2 839 and 841 cm(-1) are typical of PP by comparing the spectra of WPCss with that of Chinese fir, PP and other additives. The relationship between the wood flour content, PP content in WPCss and their characteristic IR peaks height ratio was established. The results show that there is a strong linear correlation between the wood flour content in WPCss and I1 059/l 1 377/I1 033, /I1377, R2 are 0.992 and 0.993 respectively; there is a high linear correlation between the PP content in WPCss and I1 377/I1 740, I2 839 /I1 740 R2 are 0.985 and 0.981, respectively. Quantitative methods of the wood flour content and PP content in WPCss by FTIR were developed, the predictive equations of the wood flour content in WPCss are y = 53.297x-9. 107 and y = 55.922x-10.238, the predictive equations of the PP content in WPCss are y = 6.828 5x+5.403 6 and y = 8.719 7x+3.295 8. The results of the accuracy test and precision test show that the method has strong repeatability and high accuracy. The average prediction relative deviations of the wood flour content and PP content in WPCss are about 5%. The prediction accuracy has been improved remarkably, compared to

Structure and Function of Wood

Treesearch

Alex C. Wiedenhoeft

2012-01-01

Wood is a complex biological structure, a composite of many cell types and chemistries acting together to serve the needs of living plant. Attempting to understand wood inthe context of wood technology, we have often overlooked the basic fact that wood evolved over the course of millions of years to serve three main functions in plants-conduction of water from the...

Adhesive interactions with wood

Treesearch

Charles R. Frihart

2004-01-01

While the chemistry for the polymerization of wood adhesives has been studied systematically and extensively, the critical aspects of the interaction of adhesives with wood are less clearly understood. General theories of bond formation need to be modified to take into account the porosity of wood and the ability of chemicals to be absorbed into the cell wall....

Wood Formation in Trees

Treesearch

Melanie Mauriat; Gregoire Le Provost; Phillippe Rozenberg; Sylvain Delzon; Nathalie Breda; Bruno Clair; Catherine Coutand; Jean-Christoph Domec; Thierry Fourcaud; Jacqueline Grima-Pettenati; Raul Herrera; Jean-Charles Leple; Nicolas Richet; Jean-Francois Trontin; Christophe Plomion

2014-01-01

Among the ecosystem services provided by forests, wood provisioning takes a central position. Wood and derived products have played a critical role in the evolution of human kind and demand for raw material is increasing in a foreseeable future. Wood is used for energy production, construction and a wide variety of products for which different properties are required....

Weathering characteristics of wood plastic composites reinforced with extracted or delignified wood flour

Treesearch

Yao Chen; Nicole M. Stark; Mandla A. Tshabalala; Jianmin Gao; Yongming Fan

2016-01-01

This study investigated weathering performance of an HDPE wood plastic composite reinforced with extracted or delignified wood flour (WF). The wood flour was pre-extracted with three different solvents, toluene/ethanol (TE), acetone/water (AW), and hot water (HW), or sodium chlorite/acetic acid. The spectral properties of the composites before and after artificial...

The Asian Wood Pellet Markets

Treesearch

Joseph A. Roos; Allen Brackley

2012-01-01

This study examines the three major wood pellet markets in Asia: China, Japan, and South Korea. In contrast to the United States, where most wood pellets are used for residential heating with pellet stoves, a majority of the wood pellets in Asia are used for co-firing at coal-fired power plants. Our analysis indicated that Japan is the largest importer of wood pellets...

Structure and function of wood

Treesearch

Alex Wiedenhoeft

2010-01-01

Wood is a complex biological structure, a composite of many chemistries and cell types acting together to serve the needs of a living plant. Attempting to understand wood in the context of wood technology, we have often overlooked the key and basic fact that wood evolved over the course of millions of years to serve three main functions in plants― conduction of water...

Nutrient-induced modifications of wood anatomical traits of Alchornea lojaensis (Euphorbiaceae)

NASA Astrophysics Data System (ADS)

Spannl, Susanne; Homeier, Jürgen; Bräuning, Achim

2016-05-01

Regarding woody plant responses on higher atmospheric inputs of the macronutrients nitrogen (N) and phosphorous (P) on tropical forests in the future, an adaptive modification of wood anatomical traits on the cellular level of woody plants is expected. As part of an interdisciplinary nutrient manipulation experiment (NUMEX) carried out in Southern Ecuador, we present here the first descriptive and quantitative wood anatomical analysis of the tropical evergreen tree species Alchornea lojaensis (Euphorbiaceae). We sampled branch wood of nine individual trees belonging to treatments with N fertilization, N+P fertilization, and a control group, respectively. Quantitative evaluations of eleven different vessel parameters were conducted. The results showed that this endemic tree species will be able to adapt well to the future effects of climate change and higher nutrient deposition. This was firstly implied by an increase in vessel diameter and consequently a higher theo. area-specific hydraulic conductivity with higher nutrient availability. Secondly, the percentage of small vessels (0-20µm diameter) strongly increased with fertilization. Thirdly, the vessel arrangement (solitary vessels vs. multiple vessel groupings) changed towards a lower percentage of solitary vessel fraction (VS), and concurrently towards a higher total vessel grouping index (VG) and a higher mean group size of non-solitary vessels (VM) after N and N+P addition. We conclude that higher nutrient availability of N and N+P triggered higher foliage amount and water demand, leading to higher cavitation risk in larger vessels. This is counteracted by a stronger grouping of vessels with smaller risk of cavitation to ensure water supply during drier periods that are expected to occur in higher frequency in the near future.

Acoustic and adsorption properties of submerged wood

NASA Astrophysics Data System (ADS)

Hilde, Calvin Patrick

Wood is a common material for the manufacture of many products. Submerged wood, in particular, is used in niche markets, such as the creation of musical instruments. An initial study performed on submerged wood from Ootsa Lake, British Columbia, provided results that showed that the wood was not suitable for musical instruments. This thesis re-examined the submerged wood samples. After allowing the wood to age unabated in a laboratory setting, the wood was retested under the hypothesis that the physical acoustic characteristics would improve. It was shown, however, that the acoustic properties became less adequate after being left to sit. The adsorption properties of the submerged wood were examined to show that the submerged wood had a larger accessible area of wood than that of control wood samples. This implied a lower amount of crystalline area within the submerged wood. From the combined adsorption and acoustic data for the submerged wood, relationships between the moisture content and speed of sound were created and combined with previous research to create a proposed model to describe how the speed of sound varies with temperature, moisture content and the moisture content corresponding to complete hydration of sorption sites within the wood.

Moisture Performance of wood-plastic composites reinforced with extracted and delignified wood flour

Treesearch

Yao Chen; Nicole M. Stark; Mandla A. Tshabalala; Jianmin Gao; Yongming Fan

2014-01-01

This study investigated the effect of using extracted and delignified wood flour on water sorption properties of wood–plastic composites. Wood flour (WF) extraction was performed with three solvent systems: toluene/ethanol (TE), acetone/water (AW), and hot water (HW); delignification was conducted using sodium chlorite/acetic acid solution. A 24 full-factorial...

Chemical modification of wood

Treesearch

Roger M. Rowell

2005-01-01

The properties of any resource are, in general, a result of the chemistry of the components of that resource. In the case of wood, the cell wall polymers (cellulose, hemicelluloses, and lignin) are the components that, if modified, would change the properties of the resource. If the properties of the wood are modified, the performance of the modified wood would be...

Chapter 9: Wood Energy

Treesearch

Francisco X. Aguilar; Karen Abt; Branko Glavonjic; Eugene Lopatin; Warren  Mabee

2016-01-01

The availabilty of information on wood energy continues to improve, particularly for commoditized woodfuels.  Wood energy consumption and production vary in the UNECE region because demand is strngly affected by weather and the prices of competing energy sources.  There has been an increase in wood energy in the power-and-heat sector in the EU28 and North American...

Iron Stain on Wood

Treesearch

Mark Knaebe

2013-01-01

Iron stain, an unsightly blue–black or gray discoloration, can occur on nearly all woods. Oak, redwood, cypress, and cedar are particularly prone to iron stain because these woods contain large amounts of tannin-like extractives. The discoloration is caused by a chemical reaction between extractives in the wood and iron in steel products, such as nails, screws, and...

Resident perceptions of anatomy education: a survey of medical school alumni from two different anatomy curricula and multiple medical specialties.

PubMed

Bohl, Michael A; Gest, Thomas R

2011-01-01

In 2004, the University of Michigan Medical School reduced its gross anatomy curriculum. To determine the effect of this reduction on resident perceptions of their clinical preparedness, we surveyed alumni that included residents from the original and new shortened curricula. A Likert-scale survey was sent to four classes of alumni. Respondents were compared in old curriculum (OC) and new curriculum (NC) groups, surgical specialty (SS) and nonsurgical specialty (NS) groups, and subgroups of SS and NS were compared for differences between OC and NC. Mean response scores were compared using independent samples T-tests. As a single population (n = 110), respondents felt their anatomy education prepared them well for residency, that a more robust anatomy curriculum would be helpful, that dissection was important to their residency preparation, and that a 4th year anatomy elective was effective in expanding their anatomy education and preparing them for residency. No significant difference existed between OC and NC groups, neither as a whole nor as SS and NS subgroups. The SS group felt dissection was more important to their residency preparation than the NS group (P = 0.001) and that a more robust anatomy curriculum would have better prepared them for residency (P = 0.001). Thirty percent of SS respondents who did not take a 4th year elective commented that they wish they had. Fourth year anatomy electives were highly valued by residents, and respondents felt that they should be offered to students as a way of revisiting anatomy following the 1st year of clinical training. Copyright © 2011 American Association of Anatomists.

Environmental assessment of a wood-waste-fired industrial watertube boiler. Volume 1. Technical results. Final report, March 1981-March 1984

DOE Office of Scientific and Technical Information (OSTI.GOV)

Castaldini, C.; Waterland, L.R.

1987-03-01

The two-volume report gives results from field tests of a wood-waste-fired industrial watertube boiler. Two series of tests were performed: one firing dry (11% moisture) wood waste, and the other firing green (34% moisture) wood waste. Emission measurements included: continuous monitoring of flue-gas emissions; source-assessment sampling system (SASS) sampling of the flue gas with subsequent laboratory analysis of samples to give total flue-gas organics in two boiling-point ranges, compound category information within these ranges, specific quantitation of the semi-volatile organic priority pollutants, and flue-gas concentrations of 73 trace elements; Method 5 sampling for particulate; controlled condensation system sampling for SO/submore » 2/ and SO/sub 3/; and grab sampling of boiler mechanical collector hopper ash for inorganic composition determinations. Total organic emissions decreased from 60-135 mg/dscm firing dry wood to 2-65 mg/dscm firing green wood, in parallel with corresponding boiler CO emissions.« less

Environmental assessment of a wood-waste-fired industrial watertube boiler. Volume 2. Data supplement. Final report, March 1981-March 1984

DOE Office of Scientific and Technical Information (OSTI.GOV)

Castaldini, C.; Waterland, L.R.

1987-03-01

The two-volume report gives results from field tests of a wood-waste-fired industrial watertube boiler. Two series of tests were performed: one firing dry (11% moisture) wood waste, and the other firing green (34% moisture) wood waste. Emission measurements included: continuous monitoring of flue-gas emissions; source-assessment sampling system (SASS) sampling of the flue-gas with subsequent laboratory analysis of samples to give total flue-gas organics in two boiling-point ranges, compound category information within these ranges, specific quantitation of the semi-volatile organic priority pollutants, and flue gas concentrations of 73 trace elements; Method 5 sampling for particulate; controlled condensation system sampling for SO/submore » 2/ and SO/sub 3/; and grab sampling of boiler mechanical collector hopper ash for inorganic and organic composition determinations. Total organic emissions decreased from 60-135 mg/dscm firing dry wood to 2-65 mg/dscm firing green wood, in parallel with corresponding boiler CO emissions.« less

Variant adrenal venous anatomy in 546 laparoscopic adrenalectomies.

PubMed

Scholten, Anouk; Cisco, Robin M; Vriens, Menno R; Shen, Wen T; Duh, Quan-Yang

2013-04-01

Knowing the types and frequency of adrenal vein variants would help surgeons identify and control the adrenal vein during laparoscopic adrenalectomy. To establish the surgical anatomy of the main vein and its variants for laparoscopic adrenalectomy and to analyze the relationship between variant adrenal venous anatomy and tumor size, pathologic diagnosis, and operative outcomes. In a retrospective review of patients at a tertiary referral hospital, 506 patients underwent 546 consecutive laparoscopic adrenalectomies between April 22, 1993, and October 21, 2011. Patients with variant adrenal venous anatomy were compared with patients with normal adrenal venous anatomy regarding preoperative variables (patient and tumor characteristics [size and location] and clinical diagnosis), intraoperative variables (details on the main adrenal venous drainage, any variant venous anatomy, duration of operation, rate of conversion to hand-assisted or open procedure, and estimated blood loss), and postoperative variables (transfusion requirement, reoperation for bleeding, duration of hospital stay, and histologic diagnosis). Laparoscopic adrenalectomy. Prevalence of variant adrenal venous anatomy and its relationship to tumor characteristics, pathologic diagnosis, and operative outcomes. Variant venous anatomy was encountered in 70 of 546 adrenalectomies (13%). Variants included no main adrenal vein identifiable (n = 18), 1 main adrenal vein with additional small veins (n = 11), 2 adrenal veins (n = 20), more than 2 adrenal veins (n = 14), and variants of the adrenal vein drainage to the inferior vena cava and hepatic vein or of the inferior phrenic vein (n = 7). Variants occurred more often on the right side than on the left side (42 of 250 glands [17%] vs. 28 of 296 glands [9%], respectively; P = .02). Patients with variant anatomy compared with those with normal anatomy had larger tumors (mean, 5.1 vs 3.3 cm, respectively; P < .001), more pheochromocytomas (24 of 70 [35%] vs

Spring temperature responses of oaks are synchronous with North Atlantic conditions during the last deglaciation

Treesearch

Steven L. Voelker; Paul-Emile Noirot-Cosson; Michael C. Stambaugh; Erin R. McMurry; Frederick C. Meinzer; Barbara Lachenburch; Richard P. Guyette

2012-01-01

Paleoclimate proxies based on the measurement of xylem cell anatomy have rarely been developed across the temperature range of a species or applied to wood predating the most recent millennium. Here we describe wood anatomy-based proxies for spring temperatures in central North America from modern bur oaks (Quercus macrocarpa Michx.). The strong...

Differences in subependymal vein anatomy may predispose preterm infants to GMH-IVH.

PubMed

Tortora, Domenico; Severino, Mariasavina; Malova, Mariya; Parodi, Alessandro; Morana, Giovanni; Sedlacik, Jan; Govaert, Paul; Volpe, Joseph J; Rossi, Andrea; Ramenghi, Luca Antonio

2018-01-01

The anatomy of the deep venous system plays an important role in the pathogenesis of brain lesions in the preterm brain as shown by different histological studies. The aims of this study were to compare the subependymal vein anatomy of preterm neonates with germinal matrix haemorrhage-intraventricular haemorrhage (GMH-IVH), as evaluated by susceptibility-weighted imaging (SWI) venography, with a group of age-matched controls with normal brain MRI, and to explore the relationship between the anatomical features of subependymal veins and clinical risk factors for GMH-IVH. SWI venographies of 48 neonates with GMH-IVH and 130 neonates with normal brain MRI were retrospectively evaluated. Subependymal vein anatomy was classified into six different patterns: type 1 represented the classic pattern and types 2-6 were considered anatomic variants. A quantitative analysis of the venous curvature index was performed. Variables were analysed by using Mann-Whitney U and χ 2 tests, and a multiple logistic regression analysis was performed to evaluate the association between anatomical features, clinical factors and GMH-IVH. A significant difference was noticed among the six anatomical patterns according to the presence of GMH-IVH (χ 2 =14.242, p=0.014). Anatomic variants were observed with higher frequency in neonates with GMH-IVH than in controls (62.2% and 49.6%, respectively). Neonates with GMH-IVH presented a narrower curvature of the terminal portion of subependymal veins (p<0.05). These anatomical features were significantly associated with GMH-IVH (p<0.05). Preterm neonates with GMH-IVH show higher variability of subependymal veins anatomy confirming a potential role as predisposing factor for GMH-IVH. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Multimodal integration of anatomy and physiology classes: How instructors utilize multimodal teaching in their classrooms

NASA Astrophysics Data System (ADS)

McGraw, Gerald M., Jr.

Multimodality is the theory of communication as it applies to social and educational semiotics (making meaning through the use of multiple signs and symbols). The term multimodality describes a communication methodology that includes multiple textual, aural, and visual applications (modes) that are woven together to create what is referred to as an artifact. Multimodal teaching methodology attempts to create a deeper meaning to course content by activating the higher cognitive areas of the student's brain, creating a more sustained retention of the information (Murray, 2009). The introduction of multimodality educational methodologies as a means to more optimally engage students has been documented within educational literature. However, studies analyzing the distribution and penetration into basic sciences, more specifically anatomy and physiology, have not been forthcoming. This study used a quantitative survey design to determine the degree to which instructors integrated multimodality teaching practices into their course curricula. The instrument used for the study was designed by the researcher based on evidence found in the literature and sent to members of three associations/societies for anatomy and physiology instructors: the Human Anatomy and Physiology Society; the iTeach Anatomy & Physiology Collaborate; and the American Physiology Society. Respondents totaled 182 instructor members of two- and four-year, private and public higher learning colleges collected from the three organizations collectively with over 13,500 members in over 925 higher learning institutions nationwide. The study concluded that the expansion of multimodal methodologies into anatomy and physiology classrooms is at the beginning of the process and that there is ample opportunity for expansion. Instructors continue to use lecture as their primary means of interaction with students. Email is still the major form of out-of-class communication for full-time instructors. Instructors with

Sensory-directed identification of taste-active ellagitannins in American (Quercus alba L.) and European oak wood (Quercus robur L.) and quantitative analysis in bourbon whiskey and oak-matured red wines.

PubMed

Glabasnia, Arne; Hofmann, Thomas

2006-05-03

Aimed at increasing our knowledge on the sensory-active nonvolatiles migrating from oak wood into alcoholic beverages upon cooperaging, an aqueous ethanolic extract prepared from oak wood chips (Quercus alba L.) was screened for its key taste compounds by application of the taste dilution analysis. Purification of the compounds perceived with the highest sensory impacts, followed by liquid chromatography/mass spectrometry as well as one-dimensional and two-dimensional NMR experiments, revealed the ellagitannins vescalagin, castalagin, and grandinin, the roburins A-E, and 33-deoxy-33-carboxyvescalagin as the key molecules imparting an astringent oral sensation. To the best of our knowledge, 33-deoxy-33-carboxyvescalagin has as yet not been reported as a phytochemical in Q. alba L. In addition, the sensory activity of these ellagitannins was determined for the first time on the basis of their human threshold concentrations and dose/response functions. Furthermore, the ellagitannins have been quantitatively determined in extracts prepared from Q. alba L. and Quercus robur L., respectively, as well as in bourbon whiskey and oak-matured red wines, and the sensory contribution of the individual compounds has been evaluated for the first time on the basis of dose/activity considerations.

Scoliosis convexity and organ anatomy are related.

PubMed

Schlösser, Tom P C; Semple, Tom; Carr, Siobhán B; Padley, Simon; Loebinger, Michael R; Hogg, Claire; Castelein, René M

2017-06-01

Primary ciliary dyskinesia (PCD) is a respiratory syndrome in which 'random' organ orientation can occur; with approximately 46% of patients developing situs inversus totalis at organogenesis. The aim of this study was to explore the relationship between organ anatomy and curve convexity by studying the prevalence and convexity of idiopathic scoliosis in PCD patients with and without situs inversus. Chest radiographs of PCD patients were systematically screened for existence of significant lateral spinal deviation using the Cobb angle. Positive values represented right-sided convexity. Curve convexity and Cobb angles were compared between PCD patients with situs inversus and normal anatomy. A total of 198 PCD patients were screened. The prevalence of scoliosis (Cobb >10°) and significant spinal asymmetry (Cobb 5-10°) was 8 and 23%, respectively. Curve convexity and Cobb angle were significantly different within both groups between situs inversus patients and patients with normal anatomy (P ≤ 0.009). Moreover, curve convexity correlated significantly with organ orientation (P < 0.001; ϕ = 0.882): In 16 PCD patients with scoliosis (8 situs inversus and 8 normal anatomy), except for one case, matching of curve convexity and orientation of organ anatomy was observed: convexity of the curve was opposite to organ orientation. This study supports our hypothesis on the correlation between organ anatomy and curve convexity in scoliosis: the convexity of the thoracic curve is predominantly to the right in PCD patients that were 'randomized' to normal organ anatomy and to the left in patients with situs inversus totalis.

Learning of Cross-Sectional Anatomy Using Clay Models

ERIC Educational Resources Information Center

Oh, Chang-Seok; Kim, Ji-Young; Choe, Yeon Hyeon

2009-01-01

We incorporated clay modeling into gross anatomy and neuro-anatomy courses to help students understand cross-sectional anatomy. By making clay models, cutting them and comparing cut surfaces to CT and MR images, students learned how cross-sectional two-dimensional images were created from three-dimensional structure of human organs. Most students…

Wood Litter Consumption by three Species of Nasutitermes Termites in an Area of the Atlantic Coastal Forest in Northeastern Brazil

PubMed Central

Vasconcellos, Alexandre; Moura, Flávia Maria da Silva

2010-01-01

Termites constitute a considerable fraction of the animal biomass in tropical forest, but little quantitative data are available that indicates their importance in the processes of wood decomposition. This study evaluated the participation of Nasutitermes corniger (Motschulsky) (Isoptera: Termitidae), N. ephratae (Holmgren), and N. macrocephalus (Silvestri) in the consumption of the wood litter in a remnant area of Atlantic Coastal Forest in northeastern Brazil. The populations of this species were quantified in nests and in decomposing tree trunks, while the rate of wood consumption was determined in the laboratory using wood test-blocks of Clitoria fairchildiana Howard (Fabales: Fabaceae), Cecropia sp. (Urticales: Cecropiaceae), and Protium heptaphyllum (Aublet) Marchand (Sapindales: Burseraceae). The abundance of the three species of termites varied from 40.8 to 462.2 individuals/m2. The average dry wood consumption for the three species was 9.4 mg/g of termites (fresh weight)/day, with N. macrocephalus demonstrating the greatest consumption (12.1 mg/g of termite (fresh weight)/day). Wood consumption by the three species of Nasutitermes was estimated to be 66.9 kg of dry wood /ha/year, corresponding to approximately 2.9% of the annual production of wood-litter in the study area. This consumption, together with that of the other 18 exclusively wood-feeders termite species known to occur in the area, indicates the important participation of termites in removing wood-litter within the Atlantic Coastal Forest domain. PMID:20673190

Using Live-Crown Ratio to Control Wood Quality: An Example of Quantitative Silviculture

Treesearch

Thomas J. Dean

1999-01-01

Quantitative silviculture is the application of biological relationships in meeting specific, quantitative management objectives. It is a two-sided approach requiring the identification and application of biological relationships. An example of quantitative silviculture is presented that uses a relationship between average-live crown ratio and relative stand density...

The role of wood hardness in limiting nest site selection in avian cavity excavators

Treesearch

Teresa J. Lorenz; Kerri T. Vierling; Timothy R. Johnson; Philip C. Fischer

2015-01-01

Woodpeckers and other primary cavity excavators (PCEs) are important worldwide for excavating cavities in trees, and a large number of studies have examined their nesting preferences. However, quantitative measures of wood hardness have been omitted from most studies, and ecologists have focused on the effects of external tree- and habitat-level features on nesting....

Bacterial associations with decaying wood : a review

Treesearch

C. A. Clausen

1996-01-01

Wood-inhabiting bacteria are associated with wood decay and may have an indirect influence on the decay process. Bacteria are able to affect wood permeability, attack wood structure, or work synergistically with other bacteria and soft-rot fungi to predispose wood to fungal attack. Bacteria that can inhabit chemically treated wood are recognized. The natural ability of...

Wood Technology: Techniques, Processes, and Products

ERIC Educational Resources Information Center

Oatman, Olan

1975-01-01

Seven areas of wood technology illustrates applicable techniques, processes, and products for an industrial arts woodworking curriculum. They are: wood lamination; PEG (polyethylene glycol) diffusion processes; wood flour and/or particle molding; production product of industry; WPC (wood-plastic-composition) process; residential construction; and…

Frank Netter's Legacy: Interprofessional Anatomy Instruction

ERIC Educational Resources Information Center

Niekrash, Christine E.; Copes, Lynn E.; Gonzalez, Richard A.

2015-01-01

Several medical schools have recently described new innovations in interprofessional interactions in gross anatomy courses. The Frank H. Netter MD School of Medicine at Quinnipiac University in Hamden, CT has developed and implemented two contrasting interprofessional experiences in first-year medical student gross anatomy dissection laboratories:…

Functional multi-locus QTL mapping of temporal trends in Scots pine wood traits.

PubMed

Li, Zitong; Hallingbäck, Henrik R; Abrahamsson, Sara; Fries, Anders; Gull, Bengt Andersson; Sillanpää, Mikko J; García-Gil, M Rosario

2014-10-09

Quantitative trait loci (QTL) mapping of wood properties in conifer species has focused on single time point measurements or on trait means based on heterogeneous wood samples (e.g., increment cores), thus ignoring systematic within-tree trends. In this study, functional QTL mapping was performed for a set of important wood properties in increment cores from a 17-yr-old Scots pine (Pinus sylvestris L.) full-sib family with the aim of detecting wood trait QTL for general intercepts (means) and for linear slopes by increasing cambial age. Two multi-locus functional QTL analysis approaches were proposed and their performances were compared on trait datasets comprising 2 to 9 time points, 91 to 455 individual tree measurements and genotype datasets of amplified length polymorphisms (AFLP), and single nucleotide polymorphism (SNP) markers. The first method was a multilevel LASSO analysis whereby trend parameter estimation and QTL mapping were conducted consecutively; the second method was our Bayesian linear mixed model whereby trends and underlying genetic effects were estimated simultaneously. We also compared several different hypothesis testing methods under either the LASSO or the Bayesian framework to perform QTL inference. In total, five and four significant QTL were observed for the intercepts and slopes, respectively, across wood traits such as earlywood percentage, wood density, radial fiberwidth, and spiral grain angle. Four of these QTL were represented by candidate gene SNPs, thus providing promising targets for future research in QTL mapping and molecular function. Bayesian and LASSO methods both detected similar sets of QTL given datasets that comprised large numbers of individuals. Copyright © 2014 Li et al.

Corrosion of Fasteners in Wood Treated with Newer Wood Preservatives

Treesearch

Samuel L. Zelinka

2013-01-01

This document compiles recent research findings related to corrosion of metals in preservative treated wood into a single report on corrosion of metals in wood. The research was conducted as part of the Research, Technology and Education portion of the National Historic Covered Bridge Preservation (NHCBP) Program administered by the Federal Highway Administration. The...

Ocular anatomy in medieval arabic medicine. A review.

PubMed

Laios, Konstantinos; Moschos, Marilita M; George, Androutsos

2016-01-01

In medieval Arabic medicine Ophthalmology had a central role. Ocular anatomy was described in many ophthalmological treatises of the physicians of the time. These physicians followed the doctrines of Galen according ocular anatomy, nevertheless their contribution to the history of ocular anatomy was the presentation of ocular anatomical sketches in their manuscripts for the fist time in medical history.

Anatomy: a must for teaching the next generation.

PubMed

Older, J

2004-04-01

Teaching anatomy to both undergraduate medical students and medical graduates is in the midst of a downward spiral. The traditional anatomy education based on topographical structural anatomy taught by didactic lectures and complete dissection of the body with personal tuition, has been replaced by a multiple range of special study modules, problem-based workshops, computers, plastic models and many other teaching tools. In some centres, dissected cadaver-based anatomy is no longer taught. Changing the undergraduate medical curriculum in the UK has taken place without any research into the key aspects of knowledge necessary or comparing methods of teaching. There is no agreement on a common national core curriculum and as a result, numerous new curricula have been introduced. No external audit or validation is carried out, so medical schools have been free to teach and assess their own work themselves. There is a great divergence in medical schools across the UK and Ireland in teaching medicine in general and anatomy in particular. Published data on the impact of these changes is scant. The reduction in undergraduate teaching and knowledge of anatomy has caused great concern, not only for undergraduates but also to postgraduate students, especially in surgery. This, together with a change in basic surgical training, a marked reduction in demonstrator posts and a change in examination standards, has set up a system that is allowing young men and women with a poor knowledge of anatomy to become surgeons. There should be a full public debate at every level; the Royal Colleges, specialist associations, the Universities, Government, both health and education. This debate should highlight areas of concern, explore in depth and define a minimal core curriculum for anatomy. Teaching must be enhanced with a critical look at both teachers and methods. The dominance of research must be reassessed to establish an equitable cohabitation with teaching. The place of basic science

Evaluating wood-based composites for incipient fungal decay with the immunodiagnostic wood decay test.

Treesearch

C.A. Clausen; L. Haughton; C. Murphy

2003-01-01

Early and accurate detection of the extent of fungal deterioration during forensic inspection of the building envelope would eliminate excessive or unnecessary replacement of wood-based building materials. Areas of water infiltration in wood-framed building envelopes in the Pacific Northwest were evaluated visually and sampled for moisture content. Wood samples were...

Patient specific anatomy: the new area of anatomy based on computer science illustrated on liver.

PubMed

Soler, Luc; Mutter, Didier; Pessaux, Patrick; Marescaux, Jacques

2015-01-01

Over the past century, medical imaging has brought a new revolution: internal anatomy of a patient could be seen without any invasive technique. This revolution has highlighted the two main limits of current anatomy: the anatomical description is physician dependent, and the average anatomy is more and more frequently insufficient to describe anatomical variations. These drawbacks can sometimes be so important that they create mistakes but they can be overcome through the use of 3D patient-specific surgical anatomy. In this article, we propose to illustrate such improvement of standard anatomy on liver. We first propose a general scheme allowing to easily compare the four main liver anatomical descriptions by Takasaki, Goldsmith and Woodburne, Bismuth and Couinaud. From this general scheme we propose four rules to apply in order to correct these initial anatomical definitions. Application of these rules allows to correct usual vascular topological mistakes of standard anatomy. We finally validate such correction on a database of 20 clinical cases compared to the 111 clinical cases of a Couinaud article. Out of the 20 images of the database, we note a revealing difference in 14 cases (70%) on at least one important branch of the portal network. Only six cases (30%) do not present a revealing difference between both labellings. We also show that the right portal fissure location on our 20 cases defined between segment V and VI of our anatomical definition is well correlated with the real position described by Couinaud on 111 cases, knowing that the theoretical position was only found in 46 cases out of 111, i.e., 41.44% of cases with the non-corrected Couinaud definition. We have proposed a new anatomical segmentation of the liver based on four main rules to apply in order to correct topological errors of the four main standard segmentations. Our validation clearly illustrates that this new definition corrects the large amount of mistakes created by the current

Patient specific anatomy: the new area of anatomy based on computer science illustrated on liver

PubMed Central

Mutter, Didier; Pessaux, Patrick; Marescaux, Jacques

2015-01-01

Background Over the past century, medical imaging has brought a new revolution: internal anatomy of a patient could be seen without any invasive technique. This revolution has highlighted the two main limits of current anatomy: the anatomical description is physician dependent, and the average anatomy is more and more frequently insufficient to describe anatomical variations. These drawbacks can sometimes be so important that they create mistakes but they can be overcome through the use of 3D patient-specific surgical anatomy. Methods In this article, we propose to illustrate such improvement of standard anatomy on liver. We first propose a general scheme allowing to easily compare the four main liver anatomical descriptions by Takasaki, Goldsmith and Woodburne, Bismuth and Couinaud. From this general scheme we propose four rules to apply in order to correct these initial anatomical definitions. Application of these rules allows to correct usual vascular topological mistakes of standard anatomy. We finally validate such correction on a database of 20 clinical cases compared to the 111 clinical cases of a Couinaud article. Results Out of the 20 images of the database, we note a revealing difference in 14 cases (70%) on at least one important branch of the portal network. Only six cases (30%) do not present a revealing difference between both labellings. We also show that the right portal fissure location on our 20 cases defined between segment V and VI of our anatomical definition is well correlated with the real position described by Couinaud on 111 cases, knowing that the theoretical position was only found in 46 cases out of 111, i.e., 41.44% of cases with the non-corrected Couinaud definition. Conclusions We have proposed a new anatomical segmentation of the liver based on four main rules to apply in order to correct topological errors of the four main standard segmentations. Our validation clearly illustrates that this new definition corrects the large amount

Choosing Wood Burning Appliances

EPA Pesticide Factsheets

Information to assist consumers in choosing a wood burning appliance, including types of appliances, the differences between certified and non-certified appliances, and alternative wood heating options.

Instream wood in a steep headwater channel: geomorphic significance of large and small wood

NASA Astrophysics Data System (ADS)

Galia, Tomáš; Šilhán, Karel; Ruiz-Villanueva, Virginia; Tichavský, Radek

2016-04-01

Besides the well-known significance of large wood (LW), also small woody pieces (SW; here defined as pieces with dimensions at least 0.5 m length and 0.05 m diameter), can play an important role in steep narrow headwaters. We inventoried instream wood in the 0.4 km long Mazák headwater channel, Moravskoslezské Beskydy Mts, Czech Republic (2wood dimensions, orientation, decay status (four classes), stability (unattached/contact with hillslopes/attached by bed sediments or other wood), % of influenced channel width by a wood, the geomorphic function of a wood (step, wood jam) and % of length of a wood in channel were assessed. The total number of inventoried instream wood was 90 LWs and 199 SWs. In addition, dendrogeomorphic dating of 36 LWs and 17 SWs was performed to obtain residence time of local instream wood and to provide some insights into its mobility. Practically all investigated pieces were European beeches (Fagus sylvatica L.); only two pieces were Norway spruces (Picea abies (L.) Karst.). First results showed an increase in the number of LWs in channel-reaches confined by the steepest adjacent hillslopes (especially at 0.15-0.20 km). Increasing downstream amount of SW most likely reflected transport processes in the stream, and the later deposition of SWs on the lowest channel gradients. Also LWs and SWs in the downstream channel-reaches were more decayed than wood presented in the upper reaches. The orientation of instream wood was connected with its length and stability, and LWs longer than 5 m were usually attached to adjacent hillslopes. Pieces longer than 2 m, which were unattached or were somehow stabilized in the channel bed, had often orientation of 0° or 337°. LWs were mostly unattached in the upstream channel-reaches, while often stabilized by adjacent hillslopes in the middle part. At 0.05-0.10 km, there were also many logs stabilized by

Quantitative and Qualitative Changes in Teaching Histology by Means of Virtual Microscopy in an Introductory Course in Human Anatomy

ERIC Educational Resources Information Center

Husmann, Polly R.; O'Loughlin, Valerie Dean; Braun, Mark W.

2009-01-01

This study compares overall laboratory averages and individual test scores along with a student survey to determine the effects of using virtual microscopy in place of optical microscopes in a large undergraduate human anatomy course. T-tests revealed that the first two laboratory examinations (of four) and the overall laboratory averages were…

Japanese Neurosurgeons and Microsurgical Anatomy: A Historical Review

PubMed Central

MATSUSHIMA, Toshio; KAWASHIMA, Masatou; MATSUSHIMA, Ken; WANIBUCHI, Masahiko

2015-01-01

Research in microneurosurgical anatomy has contributed to great advances in neurosurgery in the last 40 years. Many Japanese neurosurgeons have traveled abroad to study microsurgical anatomy and played major roles in advancing and spreading the knowledge of anatomy, overcoming their disadvantage that the cadaver study has been strictly limited inside Japan. In Japan, they initiated an educational system for surgical anatomy that has contributed to the development and standardization of Japanese neurosurgery. For example, the Japanese Society for Microsurgical Anatomy started an annual educational meeting in the middle of 1980s and published its proceedings in Japanese every year for approximately 20 years. These are some of the achievements that bring worldwide credit to Japanese neurosurgeons. Not only should Japanese neurosurgeons improve their educational system but they should also contribute to the international education in this field, particularly in Asia. PMID:25797782

Wood anatomy of Mollinedia glabra (Spreng.) Perkins (Monimiaceae) in two Restinga Vegetation Formations at Rio das Ostras, RJ, Brazil.

PubMed

Novaes, Fernanda da S; Callado, Cátia H; Pereira-Moura, Maria Verônica L; Lima, Helena R P

2010-12-01

This paper aimed to characterize the anatomical structure of the wood of specimens of Mollinedia glabra (Spreng.) Perkins growing in two contiguous formations of restinga vegetation at Praia Virgem, in the municipality of Rio das Ostras, RJ. Both the Open Palmae (OPS) and the Sandy Strip Closed Shrub (SSCS) formations are found in coastal regions that receive between 1,100 and 1,300 mm of rainfall per year. Sapwood samples were collected in both formations. Typical anatomical features for this species include: solitary vessels, radial multiples or clusters elements, that are circular to angular in outline, 5-15 barred scalariform perforation plates, wood parenchyma scanty, septate fiber-tracheids, and wide multiseriate rays with prismatic crystals. Statistical analyses indicated a significant increase in the frequency of vessel elements and an increase in fiber-tracheid diameters in OPS individuals. These characteristics are considered structural adaptations to increased water needs caused by a greater exposure to sunlight. Continuous pruning may be responsible for the tyloses observed in OPS plants. The greater lengths and higher frequencies of the rays in SSCS trees may be due to the greater diameters of their branches. Our results suggest that M. glabra develops structural adaptations to the restinga micro-environmental variations during its development.

Bacterial Community Succession in Pine-Wood Decomposition.

PubMed

Kielak, Anna M; Scheublin, Tanja R; Mendes, Lucas W; van Veen, Johannes A; Kuramae, Eiko E

2016-01-01

Though bacteria and fungi are common inhabitants of decaying wood, little is known about the relationship between bacterial and fungal community dynamics during natural wood decay. Based on previous studies involving inoculated wood blocks, strong fungal selection on bacteria abundance and community composition was expected to occur during natural wood decay. Here, we focused on bacterial and fungal community compositions in pine wood samples collected from dead trees in different stages of decomposition. We showed that bacterial communities undergo less drastic changes than fungal communities during wood decay. Furthermore, we found that bacterial community assembly was a stochastic process at initial stage of wood decay and became more deterministic in later stages, likely due to environmental factors. Moreover, composition of bacterial communities did not respond to the changes in the major fungal species present in the wood but rather to the stage of decay reflected by the wood density. We concluded that the shifts in the bacterial communities were a result of the changes in wood properties during decomposition and largely independent of the composition of the wood-decaying fungal communities.

Bacterial Community Succession in Pine-Wood Decomposition

PubMed Central

Kielak, Anna M.; Scheublin, Tanja R.; Mendes, Lucas W.; van Veen, Johannes A.; Kuramae, Eiko E.

2016-01-01

Though bacteria and fungi are common inhabitants of decaying wood, little is known about the relationship between bacterial and fungal community dynamics during natural wood decay. Based on previous studies involving inoculated wood blocks, strong fungal selection on bacteria abundance and community composition was expected to occur during natural wood decay. Here, we focused on bacterial and fungal community compositions in pine wood samples collected from dead trees in different stages of decomposition. We showed that bacterial communities undergo less drastic changes than fungal communities during wood decay. Furthermore, we found that bacterial community assembly was a stochastic process at initial stage of wood decay and became more deterministic in later stages, likely due to environmental factors. Moreover, composition of bacterial communities did not respond to the changes in the major fungal species present in the wood but rather to the stage of decay reflected by the wood density. We concluded that the shifts in the bacterial communities were a result of the changes in wood properties during decomposition and largely independent of the composition of the wood-decaying fungal communities. PMID:26973611

The anatomy of the mermaid.

PubMed

Heppell, D

Investigation of the anatomy of the mermaid and of mermaid lore has revealed a tangled web of stories, sightings and specimens of the most diverse nature, extending worldwide into the realms of folklore and legend, zoology and cryptozoology, anatomy, physiology, radiography and folk medicine, ethnography, social history and the history of science. The stereotype we know as the mermaid is surely a fit subject for further serious study

Chemical Composition of Cacti Wood and Comparison with the Wood of Other Taxonomic Groups.

PubMed

Maceda, Agustín; Soto-Hernández, Marcos; Peña-Valdivia, Cecilia B; Terrazas, Teresa

2018-04-01

The aims of this study were to determine the wood chemical composition of 25 species of Cactaceae and to relate the composition to their anatomical diversity. The hypothesis was that wood chemical components differ in relationship to their wood features. The results showed significant differences in wood chemical compounds across species and genera (P < 0.05). Pereskia had the highest percentage of lignin, whereas species of Coryphantha had the lowest; extractive compounds in water were highest for Echinocereus, Mammillaria, and Opuntia. Principal component analysis showed that lignin proportion separated the fibrous, dimorphic, and non-fibrous groups; additionally, the differences within each type of wood occurred because of the lignification of the vascular tissue and the type of wall thickening. Compared with other groups of species, the Cactaceae species with fibrous and dimorphic wood had a higher lignin percentage than did gymnosperms and Acer species. Lignin may confer special rigidity to tracheary elements to withstand desiccation without damage during adverse climatic conditions. © 2018 Wiley-VHCA AG, Zurich, Switzerland.

Oxalate analysis methodology for decayed wood

Treesearch

Carol A. Clausen; William Kenealy; Patricia K. Lebow

2008-01-01

Oxalate from partially decayed southern pine wood was analyzed by HPLC or colorimetric assay. Oxalate extraction efficiency, assessed by comparing analysis of whole wood cubes with ground wood, showed that both wood geometries could be extracted with comparable efficiency. To differentiate soluble oxalate from total oxalate, three extraction methods were assessed,...

The Carbon Impacts of Wood Products

Treesearch

Richard Bergman; Maureen Puettmann; Adam Taylor; Kenneth E. Skog

2014-01-01

Wood products have many environmental advantages over nonwood alternatives. Documenting and publicizing these merits helps the future competitiveness of wood when climate change impacts are being considered. The manufacture of wood products requires less fossil fuel than nonwood alternative building materials such as concrete, metals, or plastics. By nature, wood is...

Tracing nitrogen accumulation in decaying wood and examining its impact on wood decomposition rate

NASA Astrophysics Data System (ADS)

Rinne, Katja T.; Rajala, Tiina; Peltoniemi, Krista; Chen, Janet; Smolander, Aino; Mäkipää, Raisa

2016-04-01

Decomposition of dead wood, which is controlled primarily by fungi is important for ecosystem carbon cycle and has potentially a significant role in nitrogen fixation via diazotrophs. Nitrogen content has been found to increase with advancing wood decay in several studies; however, the importance of this increase to decay rate and the sources of external nitrogen remain unclear. Improved knowledge of the temporal dynamics of wood decomposition rate and nitrogen accumulation in wood as well as the drivers of the two processes would be important for carbon and nitrogen models dealing with ecosystem responses to climate change. To tackle these questions we applied several analytical methods on Norway spruce logs from Lapinjärvi, Finland. We incubated wood samples (density classes from I to V, n=49) in different temperatures (from 8.5oC to 41oC, n=7). After a common seven day pre-incubation period at 14.5oC, the bottles were incubated six days in their designated temperature prior to CO2 flux measurements with GC to determine the decomposition rate. N2 fixation was measured with acetylene reduction assay after further 48 hour incubation. In addition, fungal DNA, (MiSeq Illumina) δ15N and N% composition of wood for samples incubated at 14.5oC were determined. Radiocarbon method was applied to obtain age distribution for the density classes. The asymbiotic N2 fixation rate was clearly dependent on the stage of wood decay and increased from stage I to stage IV but was substantially reduced in stage V. CO2 production was highest in the intermediate decay stage (classes II-IV). Both N2 fixation and CO2 production were highly temperature sensitive having optima in temperature 25oC and 31oC, respectively. We calculated the variation of annual levels of respiration and N2 fixation per hectare for the study site, and used the latter data together with the 14C results to determine the amount of N2 accumulated in wood in time. The proportion of total nitrogen in wood

The central role of wood biology in understanding the durability of wood-coating interactions

Treesearch

Alex C. Wiedenhoeft

2007-01-01

To design effectively for durability, one must actively and honestly assess the material properties and limitations of each of the components in the design system; wood or wood composite, and the coating. Inasmuch as wood coatings are manufactured to specified tolerances from known materials, we have control of that component of the system. Compared to manmade...

Wood Condition Assessment Manual: Second Edition

Treesearch

Robert J. Ross; Robert H. White

2014-01-01

This report summarizes information on condition assessment of in-service wood, including visual inspection of wood and timbers, use of ultrasound and probing/boring techniques for inspection, and assessment of wood and timbers that have been exposed to fire. The report also includes information on assigning allowable design values for in-service wood.

Aligning Microtomography Analysis with Traditional Anatomy for a 3D Understanding of the Host-Parasite Interface – Phoradendron spp. Case Study

PubMed Central

Teixeira-Costa, Luíza; Ceccantini, Gregório C. T.

2016-01-01

The complex endophytic structure formed by parasitic plant species often represents a challenge in the study of the host-parasite interface. Even with the large amounts of anatomical slides, a three-dimensional comprehension of the structure may still be difficult to obtain. In the present study we applied the High Resolution X-ray Computed Tomography (HRXCT) analysis along with usual plant anatomy techniques in order to compare the infestation pattern of two mistletoe species of the genus Phoradendron. Additionally, we tested the use of contrasting solutions in order to improve the detection of the parasite’s endophytic tissue. To our knowledge, this is the first study to show the three-dimensional structure of host-mistletoe interface by using HRXCT technique. Results showed that Phoradendron perrottetii growing on the host Tapirira guianensis forms small woody galls with a restricted endophytic system. The sinkers were short and eventually grouped creating a continuous interface with the host wood. On the other hand, the long sinkers of P. bathyoryctum penetrate deeply into the wood of Cedrela fissilis branching in all directions throughout the woody gall area, forming a spread-out infestation pattern. The results indicate that the HRXCT is indeed a powerful approach to understand the endophytic system of parasitic plants. The combination of three-dimensional models of the infestation with anatomical analysis provided a broader understanding of the host-parasite connection. Unique anatomic features are reported for the sinkes of P. perrottetii, while the endophytic tissue of P. bathyoryctum conformed to general anatomy observed for other species of this genus. These differences are hypothesized to be related to the three-dimensional structure of each endophytic system and the communication stablished with the host. PMID:27630661

Microbial Communities in Sunken Wood Are Structured by Wood-Boring Bivalves and Location in a Submarine Canyon

PubMed Central

Fagervold, Sonja K.; Romano, Chiara; Kalenitchenko, Dimitri; Borowski, Christian; Nunes-Jorge, Amandine; Martin, Daniel; Galand, Pierre E.

2014-01-01

The cornerstones of sunken wood ecosystems are microorganisms involved in cellulose degradation. These can either be free-living microorganisms in the wood matrix or symbiotic bacteria associated with wood-boring bivalves such as emblematic species of Xylophaga, the most common deep-sea woodborer. Here we use experimentally submerged pine wood, placed in and outside the Mediterranean submarine Blanes Canyon, to compare the microbial communities on the wood, in fecal pellets of Xylophaga spp. and associated with the gills of these animals. Analyses based on tag pyrosequencing of the 16S rRNA bacterial gene showed that sunken wood contained three distinct microbial communities. Wood and pellet communities were different from each other suggesting that Xylophaga spp. create new microbial niches by excreting fecal pellets into their burrows. In turn, gills of Xylophaga spp. contain potential bacterial symbionts, as illustrated by the presence of sequences closely related to symbiotic bacteria found in other wood eating marine invertebrates. Finally, we found that sunken wood communities inside the canyon were different and more diverse than the ones outside the canyon. This finding extends to the microbial world the view that submarine canyons are sites of diverse marine life. PMID:24805961

Microbial communities in sunken wood are structured by wood-boring bivalves and location in a submarine canyon.

PubMed

Fagervold, Sonja K; Romano, Chiara; Kalenitchenko, Dimitri; Borowski, Christian; Nunes-Jorge, Amandine; Martin, Daniel; Galand, Pierre E

2014-01-01

The cornerstones of sunken wood ecosystems are microorganisms involved in cellulose degradation. These can either be free-living microorganisms in the wood matrix or symbiotic bacteria associated with wood-boring bivalves such as emblematic species of Xylophaga, the most common deep-sea woodborer. Here we use experimentally submerged pine wood, placed in and outside the Mediterranean submarine Blanes Canyon, to compare the microbial communities on the wood, in fecal pellets of Xylophaga spp. and associated with the gills of these animals. Analyses based on tag pyrosequencing of the 16S rRNA bacterial gene showed that sunken wood contained three distinct microbial communities. Wood and pellet communities were different from each other suggesting that Xylophaga spp. create new microbial niches by excreting fecal pellets into their burrows. In turn, gills of Xylophaga spp. contain potential bacterial symbionts, as illustrated by the presence of sequences closely related to symbiotic bacteria found in other wood eating marine invertebrates. Finally, we found that sunken wood communities inside the canyon were different and more diverse than the ones outside the canyon. This finding extends to the microbial world the view that submarine canyons are sites of diverse marine life.

Anatomy Education Faces Challenges in Pakistan

ERIC Educational Resources Information Center

Memon, Ismail K.

2009-01-01

Anatomy education in Pakistan is facing many of the same challenges as in other parts of the world. Roughly, a decade ago, all medical and dental colleges in Pakistan emphasized anatomy as a core basic discipline within a traditional medical science curriculum. Now institutions are adopting problem based learning (PBL) teaching philosophies, and…

Wood formation in Angiosperms.

PubMed

Déjardin, Annabelle; Laurans, Françoise; Arnaud, Dominique; Breton, Christian; Pilate, Gilles; Leplé, Jean-Charles

2010-04-01

Wood formation is a complex biological process, involving five major developmental steps, including (1) cell division from a secondary meristem called the vascular cambium, (2) cell expansion (cell elongation and radial enlargement), (3) secondary cell wall deposition, (4) programmed cell death, and (5) heartwood formation. Thanks to the development of genomic studies in woody species, as well as genetic engineering, recent progress has been made in the understanding of the molecular mechanisms underlying wood formation. In this review, we will focus on two different aspects, the lignification process and the control of microfibril angle in the cell wall of wood fibres, as they are both key features of wood material properties. Copyright (c) 2010 Académie des sciences. Published by Elsevier SAS. All rights reserved.

Interprofessional approach for teaching functional knee joint anatomy.

PubMed

Meyer, Jakob J; Obmann, Markus M; Gießler, Marianne; Schuldis, Dominik; Brückner, Ann-Kathrin; Strohm, Peter C; Sandeck, Florian; Spittau, Björn

2017-03-01

Profound knowledge in functional and clinical anatomy is a prerequisite for efficient diagnosis in medical practice. However, anatomy teaching does not always consider functional and clinical aspects. Here we introduce a new interprofessional approach to effectively teach the anatomy of the knee joint. The presented teaching approach involves anatomists, orthopaedists and physical therapists to teach anatomy of the knee joint in small groups under functional and clinical aspects. The knee joint courses were implemented during early stages of the medical curriculum and medical students were grouped with students of physical therapy to sensitize students to the importance of interprofessional work. Evaluation results clearly demonstrate that medical students and physical therapy students appreciated this teaching approach. First evaluations of following curricular anatomy exams suggest a benefit of course participants in knee-related multiple choice questions. Together, the interprofessional approach presented here proves to be a suitable approach to teach functional and clinical anatomy of the knee joint and further trains interprofessional work between prospective physicians and physical therapists as a basis for successful healthcare management. Copyright © 2016 The Authors. Published by Elsevier GmbH.. All rights reserved.

Reusing remediated CCA-treated wood

Treesearch

Carol A. Clausen

2003-01-01

Options for recycling and reusing chromated-copper-arsenate- (CCA) treated material include dimensional lumber and round wood size reduction, composites, and remediation. Size reduction by remilling, shaving, or resawing CCA-treated wood reduces the volume of landfilled waste material and provides many options for reusing used treated wood. Manufacturing composite...

Classroom Demonstrations of Wood Properties.

ERIC Educational Resources Information Center

Foulger, A. N.

Presented in this manual are 20 activities selected to show some of the properties of wood and how these properties relate to the cellular structure of wood. Each activity includes stated objectives, indicates materials needed, and explains procedures. Illustrations related to the activities, glossary of terms, and photographs of wood structure…

The challenge of bonding treated wood

Treesearch

Charles R. Frihart

2004-01-01

Wood products are quite durable if exposure to moisture is minimized; however, most uses of wood involve considerable exposure to moisture. To preserve the wood, chemicals are used to minimize moisture pickup, to prevent insect attack, and/or to resist microbial growth. The chemicals used as preservatives can interfere with adhesive bonds to wood. Given the many...

FIRE INSURANCE AND WOOD SCHOOL BUILDINGS.

ERIC Educational Resources Information Center

PURCELL, FRANK X.

A COMPARISON OF FIRE INSURANCE COSTS OF WOOD, MASONRY, STEEL AND CONCRETE STRUCTURES SHOWS FIRE INSURANCE PREMIMUMS ON WOOD STRUCTURES TEND TO BE HIGHER THAN PREMIUMS ON MASONRY, STEEL AND CONCRETE BUILDINGS, HOWEVER, THE INITIAL COST OF THE WOOD BUILDINGS IS LOWER. DATA SHOW THAT THE SAVINGS ACHIEVED IN THE INITIAL COST OF WOOD STRUCTURES OFFSET…

Fire resistance of exposed wood members

Treesearch

Robert H. White

2004-01-01

Fire resistance data on exposed wood beams and columns are plentiful, but few studies have been done on exposed wood members in tension and in decks. To provide data to verify the application of a new calculation procedure, a limited series of fire resistance tests were conducted on wood members loaded in tension and on exposed wood decks.

Physical and mechanical properties of bio-composites from wood particles and liquefied wood resin

Treesearch

Hui Pan; Todd F. Shupe; Chung-Yun Hse

2009-01-01

Compression molded composites were made from wood particles and a liquefied wood/phenol/formaldehyde co-condensed resin. Based on our previous research, a phenol to wood (P/W) ratio of 2/1 was chosen for this study. The two experimental variables selected were: 1) liquefaction temperature (150o and 180oC) and 2) cooking method (atmospheric and sealed). Panels were...

Spatial abilities and anatomy knowledge assessment: A systematic review.

PubMed

Langlois, Jean; Bellemare, Christian; Toulouse, Josée; Wells, George A

2017-06-01

Anatomy knowledge has been found to include both spatial and non-spatial components. However, no systematic evaluation of studies relating spatial abilities and anatomy knowledge has been undertaken. The objective of this study was to conduct a systematic review of the relationship between spatial abilities test and anatomy knowledge assessment. A literature search was done up to March 20, 2014 in Scopus and in several databases on the OvidSP and EBSCOhost platforms. Of the 556 citations obtained, 38 articles were identified and fully reviewed yielding 21 eligible articles and their quality were formally assessed. Non-significant relationships were found between spatial abilities test and anatomy knowledge assessment using essays and non-spatial multiple-choice questions. Significant relationships were observed between spatial abilities test and anatomy knowledge assessment using practical examination, three-dimensional synthesis from two-dimensional views, drawing of views, and cross-sections. Relationships between spatial abilities test and anatomy knowledge assessment using spatial multiple-choice questions were unclear. The results of this systematic review provide evidence for spatial and non-spatial methods of anatomy knowledge assessment. Anat Sci Educ 10: 235-241. © 2016 American Association of Anatomists. © 2016 American Association of Anatomists.

Toward a better understanding of the lignin isolation process from wood.

PubMed

Guerra, Anderson; Filpponen, Ilari; Lucia, Lucian A; Saquing, Carl; Baumberger, Stephanie; Argyropoulos, Dimitris S

2006-08-09

The recently developed protocol for isolating enzymatic mild acidolysis lignins (EMAL) coupled with the novel combination of derivatization followed by reductive cleavage (DFRC) and quantitative (31)P NMR spectroscopy were used to better understand the lignin isolation process from wood. The EMAL protocol is shown to offer access at lignin samples that are more representative of the overall lignin present in milled wood. The combination of DFRC/(31)P NMR provided a detailed picture on the effects of the isolation conditions on the lignin structure. More specifically, we have used vibratory and ball milling as the two methods of wood pulverization and have compared their effects on the lignin structures and molecular weights. Vibratory-milling conditions cause substantial lignin depolymerization. Lignin depolymerization occurs via the cleavage of uncondensed beta-aryl ether linkages, while condensed beta-aryl ethers and dibenzodioxocins were found to be resistant to such mechanical action. Condensation and side chain oxidations were induced mechanochemically under vibratory-milling conditions as evidenced by the increased amounts of condensed phenolic hydroxyl and carboxylic acid groups. Alternatively, the mild mechanical treatment offered by ball milling was found not to affect the isolated lignin macromolecular structure. However, the overall lignin yields were found to be compromised when the mechanical action was less intense, necessitating longer milling times under ball-milling conditions. As compared to other lignin preparations isolated from the same batch of milled wood, the yield of EMAL was about four times greater than the corresponding milled wood lignin (MWL) and about two times greater as compared to cellulolytic enzyme lignin (CEL). Molecular weight distribution analyses also pointed out that the EMAL protocol allows the isolation of lignin fractions that are not accessed by any other lignin isolation procedures.

Parenchymal texture measures weighted by breast anatomy: preliminary optimization in a case-control study

NASA Astrophysics Data System (ADS)

Gastounioti, Aimilia; Keller, Brad M.; Hsieh, Meng-Kang; Conant, Emily F.; Kontos, Despina

2016-03-01

Growing evidence suggests that quantitative descriptors of the parenchymal texture patterns hold a valuable role in assessing an individual woman's risk for breast cancer. In this work, we assess the hypothesis that breast cancer risk factors are not uniformly expressed in the breast parenchymal tissue and, therefore, breast-anatomy-weighted parenchymal texture descriptors, where different breasts ROIs have non uniform contributions, may enhance breast cancer risk assessment. To this end, we introduce an automated breast-anatomy-driven methodology which generates a breast atlas, which is then used to produce a weight map that reinforces the contributions of the central and upper-outer breast areas. We incorporate this methodology to our previously validated lattice-based strategy for parenchymal texture analysis. In the framework of a pilot case-control study, including digital mammograms from 424 women, our proposed breast-anatomy-weighted texture descriptors are optimized and evaluated against non weighted texture features, using regression analysis with leave-one-out cross validation. The classification performance is assessed in terms of the area under the curve (AUC) of the receiver operating characteristic. The collective discriminatory capacity of the weighted texture features was maximized (AUC=0.87) when the central breast area was considered more important than the upperouter area, with significant performance improvement (DeLong's test, p-value<0.05) against the non-weighted texture features (AUC=0.82). Our results suggest that breast-anatomy-driven methodologies have the potential to further upgrade the promising role of parenchymal texture analysis in breast cancer risk assessment and may serve as a reference in the design of future studies towards image-driven personalized recommendations regarding women's cancer risk evaluation.

Anatomy education for the YouTube generation.

PubMed

Barry, Denis S; Marzouk, Fadi; Chulak-Oglu, Kyrylo; Bennett, Deirdre; Tierney, Paul; O'Keeffe, Gerard W

2016-01-01

Anatomy remains a cornerstone of medical education despite challenges that have seen a significant reduction in contact hours over recent decades; however, the rise of the "YouTube Generation" or "Generation Connected" (Gen C), offers new possibilities for anatomy education. Gen C, which consists of 80% Millennials, actively interact with social media and integrate it into their education experience. Most are willing to merge their online presence with their degree programs by engaging with course materials and sharing their knowledge freely using these platforms. This integration of social media into undergraduate learning, and the attitudes and mindset of Gen C, who routinely creates and publishes blogs, podcasts, and videos online, has changed traditional learning approaches and the student/teacher relationship. To gauge this, second year undergraduate medical and radiation therapy students (n = 73) were surveyed regarding their use of online social media in relation to anatomy learning. The vast majority of students had employed web-based platforms to source information with 78% using YouTube as their primary source of anatomy-related video clips. These findings suggest that the academic anatomy community may find value in the integration of social media into blended learning approaches in anatomy programs. This will ensure continued connection with the YouTube generation of students while also allowing for academic and ethical oversight regarding the use of online video clips whose provenance may not otherwise be known. © 2015 American Association of Anatomists.

Interaction of copper wood preservatives and adhesives

Treesearch

Charles R. Frihart

2003-01-01

Compared to other substrates, wood is generally easy to bond. However, adhesion is diminished when the wood surface is covered by chemicals, whether natural oils and resins or added chemicals. Among the chemicals added to wood are fire retardants and wood preservatives. Chromated copper arsenate (CCA) has been widely used to protect wood against rot and termites, but...

Wood-based composites and panel products

Treesearch

John A. Youngquist

1999-01-01

Because wood properties vary among species, between trees of the same species, and between pieces from the same tree, solid wood cannot match reconstituted wood in the range of properties that can be controlled in processing. When processing variables are properly selected, the end result can sometimes surpass nature’s best effort. With solid wood, changes in...

Ionic liquid pretreatment of poplar wood at room temperature: swelling and incorporation of nanoparticles.

PubMed

Lucas, Marcel; Macdonald, Brian A; Wagner, Gregory L; Joyce, Stephen A; Rector, Kirk D

2010-08-01

Lignocellulosic biomass offers economic and environmental advantages over corn starch for biofuels production. However, its fractionation currently requires energy-intensive pretreatments, due to the lignin chemical resistance and complex cell wall structure. Recently, ionic liquids have been used to dissolve biomass at high temperatures. In this study, thin sections of poplar wood were swollen by ionic liquid (1-ethyl-3-methylimidazolium acetate) pretreatment at room temperature. The samples contract when rinsed with deionized water. The controlled expansion and contraction of the wood structure can be used to incorporate enzymes and catalysts deep into the wood structure for improved pretreatments and accelerated cellulose hydrolysis. As a proof of concept, silver and gold nanoparticles of diameters ranging from 20 to 100 nm were incorporated at depths up to 4 mum. Confocal surface-enhanced Raman images at different depths show that a significant number of nanoparticles were incorporated into the pretreated sample, and they remained on the samples after rinsing. Quantitative X-ray fluorescence microanalyses indicate that the majority of nanoparticle incorporation occurs after an ionic liquid pretreatment of less than 1 h. In addition to improved pretreatments, the incorporation of materials and chemicals into wood and paper products enables isotope tracing, development of new sensing, and imaging capabilities.

Anatomy and function of the hypothenar muscles.

PubMed

Pasquella, John A; Levine, Pam

2012-02-01

The hypothenar eminence is the thick soft tissue mass located on the ulnar side of the palm. Understanding its location and contents is important for understanding certain aspects of hand function. Variation in motor nerve distribution of the hypothenar muscles makes surgery of the ulnar side of the palm more challenging. To avoid injury to nerve branches, knowledge of these differences is imperative. This article discusses the muscular anatomy and function, vascular anatomy, and nerve anatomy and innervation of the hypothenar muscles. Copyright © 2012 Elsevier Inc. All rights reserved.

Anatomy integration blueprint: A fourth-year musculoskeletal anatomy elective model.

PubMed

Lazarus, Michelle D; Kauffman, Gordon L; Kothari, Milind J; Mosher, Timothy J; Silvis, Matthew L; Wawrzyniak, John R; Anderson, Daniel T; Black, Kevin P

2014-01-01

Current undergraduate medical school curricular trends focus on both vertical integration of clinical knowledge into the traditionally basic science-dedicated curricula and increasing basic science education in the clinical years. This latter type of integration is more difficult and less reported on than the former. Here, we present an outline of a course wherein the primary learning and teaching objective is to integrate basic science anatomy knowledge with clinical education. The course was developed through collaboration by a multi-specialist course development team (composed of both basic scientists and physicians) and was founded in current adult learning theories. The course was designed to be widely applicable to multiple future specialties, using current published reports regarding the topics and clinical care areas relying heavily on anatomical knowledge regardless of specialist focus. To this end, the course focuses on the role of anatomy in the diagnosis and treatment of frequently encountered musculoskeletal conditions. Our iterative implementation and action research approach to this course development has yielded a curricular template for anatomy integration into clinical years. Key components for successful implementation of these types of courses, including content topic sequence, the faculty development team, learning approaches, and hidden curricula, were developed. We also report preliminary feedback from course stakeholders and lessons learned through the process. The purpose of this report is to enhance the current literature regarding basic science integration in the clinical years of medical school. © 2014 American Association of Anatomists.

How to make a beetle out of wood: multi-elemental stoichiometry of wood decay, xylophagy and fungivory.

PubMed

Filipiak, Michał; Weiner, January

2014-01-01

The majority of terrestrial biomass is wood, but the elemental composition of its potential consumers, xylophages, differs hugely from that of wood. This causes a severe nutritional imbalance. We studied the stoichiometric relationships of 11 elements (C, N, P, K, Ca, Mg, Fe, Zn, Mn, Cu, Na) in three species of pine-xylem-feeding insects, Stictoleptura rubra, Arhopalus rusticus (Coleoptera, Cerambycidae) and Chalcophora mariana (Coleoptera, Buprestidae), to elucidate their mechanisms of tissue growth and to match their life histories to their dietary constraints. These beetles do not differ from other Coleoptera in their absolute elemental compositions, which are approximately 1000 (N), 100 (P, Cu) and 50 (K, Na) times higher than in dead but undecayed pine wood. This discrepancy diminishes along the wood decay gradient, but the elemental concentrations remain higher by an order of magnitude in beetles than in highly decayed wood. Numerical simulation of the life history of S. rubra shows that feeding on nutrient-poor undecayed wood would extend its development time to implausible values, whereas feeding on highly decomposed wood (heavily infected with fungi) would barely balance its nutritional budget during the long development period of this species. The changes in stoichiometry indicate that the relative change in the nutrient levels in decaying wood cannot be attributed solely to carbon loss resulting from decomposer respiration: the action of fungi substantially enriches the decaying wood with nutritional elements imported from the outside of the system, making it a suitable food for wood-eating invertebrates.

Design Projects in Human Anatomy & Physiology

ERIC Educational Resources Information Center

Polizzotto, Kristin; Ortiz, Mary T.

2008-01-01

Very often, some type of writing assignment is required in college entry-level Human Anatomy and Physiology courses. This assignment can be anything from an essay to a research paper on the literature, focusing on a faculty-approved topic of interest to the student. As educators who teach Human Anatomy and Physiology at an urban community college,…

Laser-Induced Graphene Formation on Wood.

PubMed

Ye, Ruquan; Chyan, Yieu; Zhang, Jibo; Li, Yilun; Han, Xiao; Kittrell, Carter; Tour, James M

2017-10-01

Wood as a renewable naturally occurring resource has been the focus of much research and commercial interests in applications ranging from building construction to chemicals production. Here, a facile approach is reported to transform wood into hierarchical porous graphene using CO 2 laser scribing. Studies reveal that the crosslinked lignocellulose structure inherent in wood with higher lignin content is more favorable for the generation of high-quality graphene than wood with lower lignin content. Because of its high electrical conductivity (≈10 Ω per square), graphene patterned on wood surfaces can be readily fabricated into various high-performance devices, such as hydrogen evolution and oxygen evolution electrodes for overall water splitting with high reaction rates at low overpotentials, and supercapacitors for energy storage with high capacitance. The versatility of this technique in formation of multifunctional wood hybrids can inspire both research and industrial interest in the development of wood-derived graphene materials and their nanodevices. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The effectiveness of physical models in teaching anatomy: a meta-analysis of comparative studies.

PubMed

Yammine, Kaissar; Violato, Claudio

2016-10-01

There are various educational methods used in anatomy teaching. While three dimensional (3D) visualization technologies are gaining ground due to their ever-increasing realism, reports investigating physical models as a low-cost 3D traditional method are still the subject of considerable interest. The aim of this meta-analysis is to quantitatively assess the effectiveness of such models based on comparative studies. Eight studies (7 randomized trials; 1 quasi-experimental) including 16 comparison arms and 820 learners met the inclusion criteria. Primary outcomes were defined as factual, spatial and overall percentage scores. The meta-analytical results are: educational methods using physical models yielded significantly better results when compared to all other educational methods for the overall knowledge outcome (p < 0.001) and for spatial knowledge acquisition (p < 0.001). Significantly better results were also found with regard to the long-retention knowledge outcome (p < 0.01). No significance was found for the factual knowledge acquisition outcome. The evidence in the present systematic review was found to have high internal validity and at least an acceptable strength. In conclusion, physical anatomical models offer a promising tool for teaching gross anatomy in 3D representation due to their easy accessibility and educational effectiveness. Such models could be a practical tool to bring up the learners' level of gross anatomy knowledge at low cost.

Wood Specific Gravity Variations and Biomass of Central African Tree Species: The Simple Choice of the Outer Wood.

PubMed

Bastin, Jean-François; Fayolle, Adeline; Tarelkin, Yegor; Van den Bulcke, Jan; de Haulleville, Thales; Mortier, Frederic; Beeckman, Hans; Van Acker, Joris; Serckx, Adeline; Bogaert, Jan; De Cannière, Charles

2015-01-01

Wood specific gravity is a key element in tropical forest ecology. It integrates many aspects of tree mechanical properties and functioning and is an important predictor of tree biomass. Wood specific gravity varies widely among and within species and also within individual trees. Notably, contrasted patterns of radial variation of wood specific gravity have been demonstrated and related to regeneration guilds (light demanding vs. shade-bearing). However, although being repeatedly invoked as a potential source of error when estimating the biomass of trees, both intraspecific and radial variations remain little studied. In this study we characterized detailed pith-to-bark wood specific gravity profiles among contrasted species prominently contributing to the biomass of the forest, i.e., the dominant species, and we quantified the consequences of such variations on the biomass. Radial profiles of wood density at 8% moisture content were compiled for 14 dominant species in the Democratic Republic of Congo, adapting a unique 3D X-ray scanning technique at very high spatial resolution on core samples. Mean wood density estimates were validated by water displacement measurements. Wood density profiles were converted to wood specific gravity and linear mixed models were used to decompose the radial variance. Potential errors in biomass estimation were assessed by comparing the biomass estimated from the wood specific gravity measured from pith-to-bark profiles, from global repositories, and from partial information (outer wood or inner wood). Wood specific gravity profiles from pith-to-bark presented positive, neutral and negative trends. Positive trends mainly characterized light-demanding species, increasing up to 1.8 g.cm-3 per meter for Piptadeniastrum africanum, and negative trends characterized shade-bearing species, decreasing up to 1 g.cm-3 per meter for Strombosia pustulata. The linear mixed model showed the greater part of wood specific gravity variance was

Wood Specific Gravity Variations and Biomass of Central African Tree Species: The Simple Choice of the Outer Wood

PubMed Central

Bastin, Jean-François; Fayolle, Adeline; Tarelkin, Yegor; Van den Bulcke, Jan; de Haulleville, Thales; Mortier, Frederic; Beeckman, Hans; Van Acker, Joris; Serckx, Adeline; Bogaert, Jan; De Cannière, Charles

2015-01-01

Context Wood specific gravity is a key element in tropical forest ecology. It integrates many aspects of tree mechanical properties and functioning and is an important predictor of tree biomass. Wood specific gravity varies widely among and within species and also within individual trees. Notably, contrasted patterns of radial variation of wood specific gravity have been demonstrated and related to regeneration guilds (light demanding vs. shade-bearing). However, although being repeatedly invoked as a potential source of error when estimating the biomass of trees, both intraspecific and radial variations remain little studied. In this study we characterized detailed pith-to-bark wood specific gravity profiles among contrasted species prominently contributing to the biomass of the forest, i.e., the dominant species, and we quantified the consequences of such variations on the biomass. Methods Radial profiles of wood density at 8% moisture content were compiled for 14 dominant species in the Democratic Republic of Congo, adapting a unique 3D X-ray scanning technique at very high spatial resolution on core samples. Mean wood density estimates were validated by water displacement measurements. Wood density profiles were converted to wood specific gravity and linear mixed models were used to decompose the radial variance. Potential errors in biomass estimation were assessed by comparing the biomass estimated from the wood specific gravity measured from pith-to-bark profiles, from global repositories, and from partial information (outer wood or inner wood). Results Wood specific gravity profiles from pith-to-bark presented positive, neutral and negative trends. Positive trends mainly characterized light-demanding species, increasing up to 1.8 g.cm-3 per meter for Piptadeniastrum africanum, and negative trends characterized shade-bearing species, decreasing up to 1 g.cm-3 per meter for Strombosia pustulata. The linear mixed model showed the greater part of wood specific

Inhibition and stimulation effects in communities of wood decay fungi: exudates from colonized wood influence growth by other species.

PubMed

Heilmann-Clausen, J; Boddy, L

2005-04-01

The effects of exudates from uncolonized and from partly decayed beech wood on the extension rates of 16 later stage decay fungi were investigated. The partly decayed wood had been colonized by the pyrenomycete Eutypa spinosa, or the basidiomycetes Fomes fomentarius, Stereum hirsutum, and Trametes versicolor, all known as common early decay agents in European beech forests. Sterilized wood pieces were placed onto 0.5% malt agar, opposite to small agar plugs containing the test fungi. The latter showed very variable and species-specific growth responses to the various wood types. The presence of uncolonized wood stimulated extension rates in many species, whereas the four previously decayed wood types had variable stimulatory or inhibitory effects. Wood decayed by S. hirsutum resulted in reduced extension rate, delayed growth, or total inhibition in the majority of species, thus it is suggested that this species uses secondary metabolites in a defensive strategy. A single species was, however, stimulated in the presence of S. hirsutum-decayed wood. In contrast, the presence of wood decayed by F. fomentarius was stimulatory to 45% of the species. The other previously decayed wood types generally resulted in more variable responses, depending upon species. The results are discussed in an ecological context and it is suggested that the exudates from the partly decayed wood that are responsible for the reported effects may function as infochemicals, structuring microbial communities in wood.

Online instructional anatomy videos: Student usage, self-efficacy, and performance in upper limb regional anatomy assessment.

PubMed

Langfield, Tracey; Colthorpe, Kay; Ainscough, Louise

2017-12-04

Allied health professionals concur that a sound knowledge of practical gross anatomy is vital for the clinician, however, human anatomy courses in allied health programs have been identified as high-risk for attrition and failure. While anatomists and clinicians agree that learning anatomy via human cadaveric instruction is the preferred method, students vary in their reaction to the cadaveric learning experience and have differing levels of anatomy self-efficacy. This study investigated whether student self-efficacy had an effect on student usage of supplemental instructional videos and whether the use of videos had an impact on student self-efficacy and/or learning. Anatomy self-efficacy differed based on gender and prior performance. Student usage of the videos varied widely and students with lower self-efficacy were more inclined to use the resources. The provision of the videos did not improve overall cohort performance as compared to a historical cohort, however, those students that accessed all video sets experienced a greater normalized learning gain compared to students that used none or one of the four sets of videos. Student reports and usage patterns indicate that the videos were primarily used for practical class preparation and revision. Potentially, the videos represent a passive mode of teaching whereas active learning has been demonstrated to result in greater learning gains. Adapting the videos into interactive tutorials which will provide opportunity for feedback and the development of students' self-evaluation may be more appropriate. Anat Sci Educ. © 2017 American Association of Anatomists. © 2017 American Association of Anatomists.

A quantitative study of the U.S. wood pallet industry based on supply chain management practices

Treesearch

Henry Quesada-Pineda; Scarlett Sanchez-Gomez; Philip A. Araman

2012-01-01

Pallets play an important role in the movement of goods from place to place. They are not only used in warehouses or distribution centers, but also in all those activities that require an efficient and effective method of transportation. To better understand business practices and external factors that impacts supply chain management (SCM), a survey of 1,500 U.S. wood...

Compression debarking of wood chips.

Treesearch

Rodger A. Arola; John R. Erickson

1973-01-01

Presents results from 2 years testing of a single-pass compression process for debarking wood chips of several species. The most significant variable was season of cut. Depending on species, approximately 70% of the bark was removed from wood cut in the growing season while approximately 45% was removed from wood cut in the dormant season.

Ovalbumin as a Wood Adhesive

Treesearch

Charles R. Frihart; Holly Satori; Zhu Rongxian; Michael J. Birkeland

2014-01-01

Use of proteins to bond wood dominated industrial production until the middle of the 20th century (1). The ensuing creation of the plywood and glulam beam industries allowed for more efficient use of wood resources than is possible with solid wood products. Many protein sources have been used as adhesives, including plant (soybean) and animal (blood, fish scales,...

Continued growth expected for wood energy despite turbulence of the economic crisis : wood energy markets, 2008-2009

Treesearch

Rens Hartkamp; Bengt Hillring; Warren Mabee; Olle Olsson; Kenneth Skog; Henry Spelter; Johan Vinterback; Antje Wahl

2009-01-01

The economic crisis has not reduced the demand for wood energy, which is expected to continue to grow. The downturn in sawmill production caused a shortage of raw material supply for wood pellet producers. With decreased demand for pulpwood-quality roundwood for wood and paper products in 2009, some pulpwood is being converted into wood energy. Economies of scale are...

Guidelines for Standard Photography in Gross and Clinical Anatomy

ERIC Educational Resources Information Center

Barut, Cagatay; Ertilav, Hakan

2011-01-01

Photography has a widespread usage in medicine and anatomy. In this review, authors focused on the usage of photography in gross and clinical anatomy. Photography in gross and clinical anatomy is not only essential for accurate documentation of morphological findings but also important in sharing knowledge and experience. Photographs of cadavers…

Spatial Abilities and Anatomy Knowledge Assessment: A Systematic Review

ERIC Educational Resources Information Center

Langlois, Jean; Bellemare, Christian; Toulouse, Josée; Wells, George A.

2017-01-01

Anatomy knowledge has been found to include both spatial and non-spatial components. However, no systematic evaluation of studies relating spatial abilities and anatomy knowledge has been undertaken. The objective of this study was to conduct a systematic review of the relationship between spatial abilities test and anatomy knowledge assessment. A…

Analysis of biliary anatomy according to different classification systems.

PubMed

Deka, Pranjal; Islam, Mahibul; Jindal, Deepti; Kumar, Niteen; Arora, Ankur; Negi, Sanjay Singh

2014-01-01

Variations in biliary anatomy are common, and different classifications have been described. These classification systems have not been compared to each other in a single cohort. We report such variations in biliary anatomy on magnetic resonance cholangiopancreatography (MRCP) using six different classification systems. In 299 patients undergoing MRCP for various indications, biliary anatomy was classified as described by Couinaud (1957), Huang (1996), Karakas (2008), Choi (2003), Champetier (1994), and Ohkubo (2004). Correlation with direct cholangiography and vascular anatomy was done. Bile duct dimensions were measured. Cystic duct junction and pancreaticobiliary ductal junction (PBDJ) were classified. Normal biliary anatomy was noted in 57.8 %. The most common variants were Couinaud type D2, Choi type 3A, Huang type A1, Champetier type a, Ohkubo types D and J, and Karakas type 2a. The Ohkubo classification was the most appropriate; 3.1 % of right ducts and 6.3 % of left ducts with variant anatomy could not be classified using the Ohkubo classification. There was a good agreement between MRCP and direct cholangiography (ĸ = 0.9). Anomalous PBDJ was noted in 8.7 %. Variant biliary anatomy was not associated with gender (p = 0.194) or variant vascular anatomy (p = 0.24). Although each classification system has its merits and demerits, some anatomical variations cannot be classified using any of the previously described classifications. The Ohkubo classification system is the most applicable as it considers most clinically relevant variations pertinent to hepatobiliary surgery.

Wood's lamp illumination (image)

MedlinePlus

A Wood's lamp emits ultraviolet light and can be a diagnostic aid in determining if someone has a fungal ... is an infection on the area where the Wood's lamp is illuminating, the area will fluoresce. Normally ...

Trends in performance indicators of neuroimaging anatomy research publications: a bibliometric study of major neuroradiology journal output over four decades based on web of science database.

PubMed

Wing, Louise; Massoud, Tarik F

2015-01-01

Quantitative, qualitative, and innovative application of bibliometric research performance indicators to anatomy and radiology research and education can enhance cross-fertilization between the two disciplines. We aim to use these indicators to identify long-term trends in dissemination of publications in neuroimaging anatomy (including both productivity and citation rates), which has subjectively waned in prestige during recent years. We examined publications over the last 40 years in two neuroradiological journals, AJNR and Neuroradiology, and selected and categorized all neuroimaging anatomy research articles according to theme and type. We studied trends in their citation activity over time, and mathematically analyzed these trends for 1977, 1987, and 1997 publications. We created a novel metric, "citation half-life at 10 years postpublication" (CHL-10), and used this to examine trends in the skew of citation numbers for anatomy articles each year. We identified 367 anatomy articles amongst a total of 18,110 in these journals: 74.2% were original articles, with study of normal anatomy being the commonest theme (46.7%). We recorded a mean of 18.03 citations for each anatomy article, 35% higher than for general neuroradiology articles. Graphs summarizing the rise (upslope) in citation rates after publication revealed similar trends spanning two decades. CHL-10 trends demonstrated that more recently published anatomy articles were likely to take longer to reach peak citation rate. Bibliometric analysis suggests that anatomical research in neuroradiology is not languishing. This novel analytical approach can be applied to other aspects of neuroimaging research, and within other subspecialties in radiology and anatomy, and also to foster anatomical education. © 2014 Wiley Periodicals, Inc.

Dissection of Insertion–Deletion Variants within Differentially Expressed Genes Involved in Wood Formation in Populus

PubMed Central

Gong, Chenrui; Du, Qingzhang; Xie, Jianbo; Quan, Mingyang; Chen, Beibei; Zhang, Deqiang

2018-01-01

Short insertions and deletions (InDels) are one of the major genetic variants and are distributed widely across the genome; however, few investigations of InDels have been conducted in long-lived perennial plants. Here, we employed a combination of RNA-seq and population resequencing to identify InDels within differentially expressed (DE) genes underlying wood formation in a natural population of Populus tomentosa (435 individuals) and utilized InDel-based association mapping to detect the causal variants under additive, dominance, and epistasis underlying growth and wood properties. In the present paper, 5,482 InDels detected from 629 DE genes showed uneven distributions throughout all 19 chromosomes, and 95.9% of these loci were diallelic InDels. Seventy-four InDels (positive false discovery rate q ≤ 0.10) from 68 genes exhibited significant additive/dominant effects on 10 growth and wood-properties, with an average of 14.7% phenotypic variance explained. Potential pleiotropy was observed in one-third of the InDels (representing 24 genes). Seven genes exhibited significantly differential expression among the genotypic classes of associated InDels, indicating possible important roles for these InDels. Epistasis analysis showed that overlapping interacting genes formed unique interconnected networks for each trait, supporting the putative biochemical links that control quantitative traits. Therefore, the identification and utilization of InDels in trees will be recognized as an effective marker system for molecular marker-assisted breeding applications, and further facilitate our understanding of quantitative genomics. PMID:29403506

Anatomy of lower eyelid and eyelid-cheek junction.

PubMed

Mojallal, A; Cotofana, S

2017-10-01

Understanding the anatomy of the lower eyelid and the lid-cheek junction is important for surgical and non-surgical approaches. It is important to understand the correlation between the clinical presentation and the individual anatomy to direct an adequate treatment. A review of the literature based on the authors experience combined with anatomical dissections was conducted to reveal the current concepts of the surgical and non-surgical anatomy. The various anatomical structures important for the understanding of the symptoms and the proposed treatment are described in this article. The anatomy of the lower eyelid and the lid-cheek junction has to be understood as a unit. Structures are continuous from the eyelid to the cheek influencing each other during aging. The concept of superficial, i.e. superficial to the orbicularis oculi muscle and deep facial fat compartments, i.e. deep to the orbicularis oculi muscle has to be applied in order to understand the relevant anatomy regarding the ligaments, fat compartments, muscular and tarsal structures and the vascularization. The understanding of the layered arrangement of the lower eyelid and eyelid-cheek junction anatomy enables practitioners to perform safe and effective surgical and non-surgical procedures. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

The Anatomy of Anatomy: A Review for Its Modernization

ERIC Educational Resources Information Center

Sugand, Kapil; Abrahams, Peter; Khurana, Ashish

2010-01-01

Anatomy has historically been a cornerstone in medical education regardless of nation or specialty. Until recently, dissection and didactic lectures were its sole pedagogy. Teaching methodology has been revolutionized with more reliance on models, imaging, simulation, and the Internet to further consolidate and enhance the learning experience.…

Can "YouTube" help students in learning surface anatomy?

PubMed

Azer, Samy A

2012-07-01

In a problem-based learning curriculum, most medical students research the Internet for information for their "learning issues." Internet sites such as "YouTube" have become a useful resource for information. This study aimed at assessing YouTube videos covering surface anatomy. A search of YouTube was conducted from November 8 to 30, 2010 using research terms "surface anatomy," "anatomy body painting," "living anatomy," "bone landmarks," and "dermatomes" for surface anatomy-related videos. Only relevant video clips in the English language were identified and related URL recorded. For each videotape the following information were collected: title, authors, duration, number of viewers, posted comments, and total number of days on YouTube. The data were statistically analyzed and videos were grouped into educationally useful and non-useful videos on the basis of major and minor criteria covering technical, content, authority, and pedagogy parameters. A total of 235 YouTube videos were screened and 57 were found to have relevant information to surface anatomy. Analysis revealed that 15 (27%) of the videos provided useful information on surface anatomy. These videos scored (mean ± SD, 14.0 ± 0.7) and mainly covered surface anatomy of the shoulder, knee, muscles of the back, leg, and ankle, carotid artery, dermatomes, and anatomical positions. The other 42 (73%) videos were not useful educationally, scoring (mean ± SD, 7.4 ± 1.8). The total viewers of all videos were 1,058,634. Useful videos were viewed by 497,925 (47% of total viewers). The total viewership per day was 750 for useful videos and 652 for non-useful videos. No video clips covering surface anatomy of the head and neck, blood vessels and nerves of upper and lower limbs, chest and abdominal organs/structures were found. Currently, YouTube is an inadequate source of information for learning surface anatomy. More work is needed from medical schools and educators to add useful videos on You

Constructive, Collaborative, Contextual, and Self-Directed Learning in Surface Anatomy Education

ERIC Educational Resources Information Center

Bergman, Esther M.; Sieben, Judith M.; Smailbegovic, Ida; de Bruin, Anique B. H.; Scherpbier, Albert J. J. A.; van der Vleuten, Cees P. M.

2013-01-01

Anatomy education often consists of a combination of lectures and laboratory sessions, the latter frequently including surface anatomy. Studying surface anatomy enables students to elaborate on their knowledge of the cadaver's static anatomy by enabling the visualization of structures, especially those of the musculoskeletal system, move and…

A review of wood thermal pretreatments to improve wood composite properties

Treesearch

Manuel Raul Pelaez-Samaniego; Vikram Yadama; Eini Lowell; Raul Espinoza-Herrera

2013-01-01

The objective of this paper is to review the published literature on improving properties of wood composites through thermal pretreatment of wood. Thermal pretreatment has been conducted in moist environments using hot water or steam at temperatures up to 180 and 230 ˚C, respectively, or in dry environments using inert gases at temperatures up to 240 ...

EFFECTS OF BURN RATE, WOOD SPECIES, MOISTURE CONTENT AND WEIGHT OF WOOD LOADED ON WOODSTOVE EMISSIONS

EPA Science Inventory

The report gives results of tests of four woodstove operating parameters (burn rate, wood moisture, wood load, and wood species) at two levels each using a half factorial experimental test design to determine statistically significant effects on the emission components CO, CO2, p...

How to Make a Beetle Out of Wood: Multi-Elemental Stoichiometry of Wood Decay, Xylophagy and Fungivory

PubMed Central

Filipiak, Michał; Weiner, January

2014-01-01

The majority of terrestrial biomass is wood, but the elemental composition of its potential consumers, xylophages, differs hugely from that of wood. This causes a severe nutritional imbalance. We studied the stoichiometric relationships of 11 elements (C, N, P, K, Ca, Mg, Fe, Zn, Mn, Cu, Na) in three species of pine-xylem-feeding insects, Stictoleptura rubra, Arhopalus rusticus (Coleoptera, Cerambycidae) and Chalcophora mariana (Coleoptera, Buprestidae), to elucidate their mechanisms of tissue growth and to match their life histories to their dietary constraints. These beetles do not differ from other Coleoptera in their absolute elemental compositions, which are approximately 1000 (N), 100 (P, Cu) and 50 (K, Na) times higher than in dead but undecayed pine wood. This discrepancy diminishes along the wood decay gradient, but the elemental concentrations remain higher by an order of magnitude in beetles than in highly decayed wood. Numerical simulation of the life history of S. rubra shows that feeding on nutrient-poor undecayed wood would extend its development time to implausible values, whereas feeding on highly decomposed wood (heavily infected with fungi) would barely balance its nutritional budget during the long development period of this species. The changes in stoichiometry indicate that the relative change in the nutrient levels in decaying wood cannot be attributed solely to carbon loss resulting from decomposer respiration: the action of fungi substantially enriches the decaying wood with nutritional elements imported from the outside of the system, making it a suitable food for wood-eating invertebrates. PMID:25536334

Detection of wood failure by image processing method: influence of algorithm, adhesive and wood species

Treesearch

Lanying Lin; Sheng He; Feng Fu; Xiping Wang

2015-01-01

Wood failure percentage (WFP) is an important index for evaluating the bond strength of plywood. Currently, the method used for detecting WFP is visual inspection, which lacks efficiency. In order to improve it, image processing methods are applied to wood failure detection. The present study used thresholding and K-means clustering algorithms in wood failure detection...

New Developments in Wood-Destroying Organisms from the International Research Group on Wood Preservation \\t

Treesearch

Elmer L. Schmidt

1991-01-01

New developments in wood-destroying organisms and in wood protection from the 20th annual meeting (May 1989 at Lappeenranta, Finland) of the International Research Group on Wood Preservation (IRG) are highlighted in the areas of biological control of fungi, dry rot, decay mechanisms and product problems, new techniques, insect problems and control, and developments in...

Robert Wood Johnson Foundation

MedlinePlus

Robert Wood Johnson Foundation Search How We Work Our Focus Areas About RWJF Search Menu How We Work Grants and Grant ... more For Grantees and Grantseekers The Robert Wood Johnson Foundation funds a wide array of programs which ...

A virtual reality atlas of craniofacial anatomy.

PubMed

Smith, Darren M; Oliker, Aaron; Carter, Christina R; Kirov, Miro; McCarthy, Joseph G; Cutting, Court B

2007-11-01

Head and neck anatomy is complex and represents an educational challenge to the student. Conventional two-dimensional illustrations inherently fall short in conveying intricate anatomical relationships that exist in three dimensions. A gratis three-dimensional virtual reality atlas of craniofacial anatomy is presented in an effort to address the paucity of readily accessible and customizable three-dimensional educational material available to the student of head and neck anatomy. Three-dimensional model construction was performed in Alias Maya 4.5 and 6.0. A basic three-dimensional skull model was altered to include surgical landmarks and proportions. Some of the soft tissues were adapted from previous work, whereas others were constructed de novo. Texturing was completed with Adobe Photoshop 7.0 and Maya. The Internet application was designed in Viewpoint Enliven 1.0. A three-dimensional computer model of craniofacial anatomy (bone and soft tissue) was completed. The model is compatible with many software packages and can be accessed by means of the Internet or downloaded to a personal computer. As the three-dimensional meshes are publicly available, they can be extensively manipulated by the user, even at the polygonal level. Three-dimensional computer graphics has yet to be fully exploited for head and neck anatomy education. In this context, the authors present a publicly available computer model of craniofacial anatomy. This model may also find applications beyond clinical medicine. The model can be accessed gratis at the Plastic and Reconstructive Surgery Web site or obtained as a three-dimensional mesh, also gratis, by contacting the authors.

Controlling mold on wood Pallets

Treesearch

Carol A. Clausen

2012-01-01

THE WOOD PALLET AND CONTAINER INDUSTRY CONSUMES 4.5 billion board feet (BBF) of hardwoods and 1.8 BBF of softwoods for the annual production of 400-500 million solid wood pallets. While alternative materials such as plastic, corrugated paperboard and metal have entered the market, solid wood remains the material of choice for a majority of pallets on the market (more...

Strength loss in decayed wood

Treesearch

Rebecca E. Ibach; Patricia K. Lebow

2014-01-01

Wood is a durable engineering material when used in an appropriate manner, but it is susceptible to biological decay when a log, sawn product, or final product is not stored, handled, or designed properly. Even before the biological decay of wood becomes visually apparent, the decay can cause the wood to become structurally unsound. The progression of decay to that...

Wood : mechanical fasteners

Treesearch

Douglas R. Rammer

2001-01-01

The strength and stability of any structure depends heavily on the fasteners that hold its parts together. One prime advantage of wood as a structural material is the ease with which wood structural parts can be joined together using a wide variety of fasteners: nails, staples, screws, lag screws, bolts, and various types of metal connectors. For the utmost rigidity,...

Wood thermoplastic composites

Treesearch

Daniel F. Caulfield; Craig Clemons; Rodney E. Jacobson; Roger M. Rowell

2005-01-01

The term “wood-plastic composites” refers to any number of composites that contain wood (of any form) and either thermoset or thermoplastic polymers. Thermosets or thermoset polymers are plastics that, once cured, cannot be remelted by heating. These include cured resins, such as epoxies and phenolics, plastics with which the forest products industry is most familiar (...

Structure of wood

Treesearch

Regis B. Miller

1999-01-01

The fibrous nature of wood strongly influences how it is used. Wood is primarily composed of hollow, elongate, spindle-shaped cells that are arranged parallel to each other along the trunk of a tree. When lumber and other products are cut from the tree, the characteristics of these fibrous cells and their arrangement affect such properties as strength and shrinkage as...

Gross anatomy education for South African undergraduate physiotherapy students.

PubMed

Shead, Dorothy A; Roos, Ronel; Olivier, Benita; Ihunwo, Amadi O

2018-01-16

Eight faculties in South Africa offer undergraduate physiotherapy training with gross anatomy included as a basis for clinical practice. Little information exists about anatomy education for this student body. A 42-question peer-reviewed survey was distributed to physiotherapy gross anatomy course coordinators in all the eight faculties. Seven coordinators from six (75%) of the universities responded. Two respondents' data from the same university were pooled. Collected data show that staff qualifications and experience varied widely and high to average staff to student ratios exist between faculties. Direct anatomy teaching duration was 12.3 (SD ±5.2) weeks per semester. Total number of weeks in courses per faculty was 27.6 (SD ±5.7) varying widely between institutions. Calculable direct contact anatomy hours ranged between 100 and 308 with a mean of 207.6 (SD ±78.1). Direct contact hours in lectures averaged 3.9 (SD ±1.6) per week and the average direct contact hours in practical sessions were 3.5 (SD ±1.8) per week. Dissection, prosection, plastinated models, surface anatomy, and e-learning were available across faculties. Ancillary modalities such as vertical integration and inter-professional learning were in use. All faculties had multiple-choice questions, spot tests, and short examination questions. Half had viva-voce examinations and one had additional long questions assessment. Students evaluated teaching performance in five faculties. Four faculties were reviewing anatomy programs to consider implementing changes to anatomy curriculum or pedagogy. The findings highlighted disparity between programs and also identified the need for specific guidelines to develop a unified South African gross anatomy course for physiotherapy students. Anat Sci Educ. © 2018 American Association of Anatomists. © 2018 American Association of Anatomists.

Shark Attack! Sinking Your Teeth into Anatomy.

ERIC Educational Resources Information Center

House, Herbert

2002-01-01

Presents a real life shark attack story and studies arm reattachment surgery to teach human anatomy. Discusses how knowledge of anatomy can be put to use in the real world and how the arm functions. Includes teaching notes and suggestions for classroom management. (YDS)

Analysis of three-year Wisconsin temperature histories for roof systems using wood, wood-thermoplastic composite, and fiberglass shingles

Treesearch

Jerrold E. Winandy; Cherilyn A. Hatfield

2007-01-01

Temperature histories for various types of roof shingles, wood roof sheathing, rafters, and nonventilated attics were monitored in outdoor attic structures using simulated North American light-framed construction. In this paper, 3-year thermal load histories for wood-based composite roof sheathing, wood rafters, and attics under western redcedar (WRC) shingles, wood-...

Approach to the study of human anatomy.

PubMed

Ridola, Carlo

2004-01-01

The first thing to do to describe the human body is to define the anatomical position and the bilateral symmetry which characterise every Metazoi (man included) and permit us to study the body in its two symmetric halves; the left and right sides are the result of a virtual cut on a vertical and median plan. This is followed by a resume of the general structures and the vocabulary of the outer shapes of the human body; its direction (it will be helpful to use the virtual geometric parallelepiped made by three couples of planes one orthogonal to the other); levels of structural organization (chemical, cellular, tissue, organ and the system level; the highest is the organism level). After that, rules and principles are enunciated in the four fundamental laws of anatomy regarding the organ structures and their systems studied by the surface, gross (macroscopic), systemic, regional and constitutional type anatomy. There is also some information concerning education and research, the competence of the Human Anatomy as recommended by art. 1 of D.M. 23. XI. 1999 of the Italian law. Later what Richard Snell written in the preface to "Clinical Anatomy for Medical Students" about the importance of the knowledge of human anatomy for medical and surgical applications will be reported.

Oral and Maxillofacial Anatomy.

PubMed

Sadrameli, Mitra; Mupparapu, Mel

2018-01-01

This article deals with identification and descriptions of intraoral and extraoral anatomy of the dental and maxillofacial structures. The anatomic landmarks are highlighted and described based on their radiographic appearance and their clinical significance is provided. Cone beam CT-based images are described in detail using the multiplanar reconstructions. The skull views are depicted via line diagrams in addition to their normal radiographic appearance to make identification of anatomic structures easier for clinicians. The authors cover most of the anatomic structures commonly noted via radiographs and their descriptions. This article serves as a clinician's guide to oral and maxillofacial radiographic anatomy. Copyright © 2017 Elsevier Inc. All rights reserved.

Strength of anisotropic wood and synthetic materials. [plywood, laminated wood plastics, glass fiber reinforced plastics, polymeric film, and natural wood

NASA Technical Reports Server (NTRS)

Ashkenazi, Y. K.

1981-01-01

The possibility of using general formulas for determining the strength of different anisotropic materials is considered, and theoretical formulas are applied and confirmed by results of tests on various nonmetallic materials. Data are cited on the strength of wood, plywood, laminated wood plastics, fiber glass-reinforced plastics and directed polymer films.

A veterinary anatomy tutoring system.

PubMed

Theodoropoulos, G; Loumos, V; Antonopoulos, J

1994-02-14

A veterinary anatomy tutoring system was developed by using Knowledge Pro, an object-oriented software development tool with hypermedia capabilities, and MS Access, a relational database. Communication between them is facilitated by using the Structured Query Language (SQL). The architecture of the system is based on knowledge sets, each of which covers four different descriptions of an organ, namely gross anatomy (general description), gross anatomy (comparative features), histology, and embryology, which constitute the knowledge units. These knowledge units are linked with three global variables that define the animals, the topographies, and the system to which this organ belongs, creating three data-bases. These three data-bases are interrelated through the organ field in order to establish a relational model. This system allows versatility in the student's navigation through the information space by offering different modes for information location and presentation. These include course mode, review mode, reference mode, dissection mode, and comparison mode. In addition, the system provides a self-evaluation mode.

Tribology in secondary wood machining

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ko, P.L.; Hawthorne, H.M.; Andiappan, J.

Secondary wood manufacturing covers a wide range of products from furniture, cabinets, doors and windows, to musical instruments. Many of these are now mass produced in sophisticated, high speed numerical controlled machines. The performance and the reliability of the tools are key to an efficient and economical manufacturing process as well as to the quality of the finished products. A program concerned with three aspects of tribology of wood machining, namely, tool wear, tool-wood friction characteristics and wood surface quality characterization, was set up in the Integrated Manufacturing Technologies Institute (IMTI) of the National Research Council of Canada. The studiesmore » include friction and wear mechanism identification and modeling, wear performance of surface-engineered tool materials, friction-induced vibration and cutting efficiency, and the influence of wear and friction on finished products. This research program underlines the importance of tribology in secondary wood manufacturing and at the same time adds new challenges to tribology research since wood is a complex, heterogeneous, material and its behavior during machining is highly sensitive to the surrounding environments and to the moisture content in the work piece.« less

Surface characterization of weathered wood-plastic composites produced from modified wood flour

Treesearch

James S. Fabiyi; Armando G. McDonald; Nicole M. Stark

2007-01-01

The effects of weathering on the surface properties of wood-plastic composites (WPC) were examined. High-density polyethylene (HDPE) based WPCs made from modified wood flour (untreated, extractives free, and holocellulose (delignified) fibers) were subjected to accelerated (xenon-arc) weathering. Colorimetry and Fourier-transform infrared spectroscopy were employed to...

Teaching Anatomy and Physiology Using Computer-Based, Stereoscopic Images

ERIC Educational Resources Information Center

Perry, Jamie; Kuehn, David; Langlois, Rick

2007-01-01

Learning real three-dimensional (3D) anatomy for the first time can be challenging. Two-dimensional drawings and plastic models tend to over-simplify the complexity of anatomy. The approach described uses stereoscopy to create 3D images of the process of cadaver dissection and to demonstrate the underlying anatomy related to the speech mechanisms.…

A Comprehensive Reanalysis of the Distal Iliotibial Band: Quantitative Anatomy, Radiographic Markers, and Biomechanical Properties.

PubMed

Godin, Jonathan A; Chahla, Jorge; Moatshe, Gilbert; Kruckeberg, Bradley M; Muckenhirn, Kyle J; Vap, Alexander R; Geeslin, Andrew G; LaPrade, Robert F

2017-09-01

The qualitative anatomy of the distal iliotibial band (ITB) has previously been described. However, a comprehensive characterization of the quantitative anatomic, radiographic, and biomechanical properties of the Kaplan fibers of the deep distal ITB has not yet been established. It is paramount to delineate these characteristics to fully understand the distal ITB's contribution to rotational knee stability. Purpose/Hypothesis: There were 2 distinct purposes for this study: (1) to perform a quantitative anatomic and radiographic evaluation of the distal ITB's attachment sites and their relationships to pertinent osseous and soft tissue landmarks, and (2) to quantify the biomechanical properties of the deep (Kaplan) fibers of the distal ITB. It was hypothesized that the distal ITB has definable parameters concerning its anatomic attachments and consistent relationships to surgically pertinent landmarks with correlating plain radiographic findings. In addition, it was hypothesized that the biomechanical properties of the Kaplan fibers would support their role as important restraints against internal rotation. Descriptive laboratory study. Ten nonpaired, fresh-frozen human cadaveric knees (mean age, 61.1 years; range, 54-65 years) were dissected for anatomic and radiographic purposes. A coordinate measuring device quantified the attachment areas of the distal ITB to the distal femur, patella, and proximal tibia and their relationships to pertinent bony landmarks. A radiographic analysis was performed by inserting pins into the attachment sites of relevant anatomic structures to assess their location relative to pertinent bony landmarks with fluoroscopic guidance. A further biomechanical assessment of 10 cadaveric knees quantified the load to failure and stiffness of the Kaplan fibers' insertion on the distal femur after a preconditioning protocol. Two separate deep (Kaplan) fiber bundles were identified with attachments to 2 newly identified femoral bony prominences

Chapter 1: Wood and Society

Treesearch

Chrisopher D. Risbrudt

2013-01-01

Forests, and the wood they produce, have played an important role in human activity since before recorded history. Indeed, one of the first major innovations was utilizing fire, fueled by wood, for cooking and heating. It is very likely that early hominids used wood fires for cooking, as long as 1.5 million years ago (Clark and Harris 1985). Clear evidence of this use...

Chapter 6: Above Ground Deterioration of Wood and Wood-Based Materials

Treesearch

Grant Kirker; Jerrold Winandy

2014-01-01

Wood as a material has unique properties that make it ideal for above ground exposure in a wide range of structural and non-strucutral applications. However, no material is without limitations. Wood is a bio-polymer which is subject to degradative processes, both abiotic and biotic. This chapter is a general summary of the abiotic and biotic factors that impact service...

Medical Holography for Basic Anatomy Training

DTIC Science & Technology

2013-12-01

Interservicel!ndustry Training, Simulation, and Education Conference (l/ITSEC) 2013 Medical Holography for Basic Anatomy Training Matthew Hackett...to the complex 3D structures inherent in human anatomy . One potential solution to this problem is to present medical content in three dimensions...traditional format via textbook handouts or through holography. Cognitive load analysis was performed to determine if a difference in cognitive effort was

Users guide for WoodCite, a product cost quotation tool for wood component manufacturers [computer program

Treesearch

Jeff Palmer; Adrienn Andersch; Jan Wiedenbeck; Urs. Buehlmann

2014-01-01

WoodCite is a Microsoft® Access-based application that allows wood component manufacturers to develop product price quotations for their current and potential customers. The application was developed by the U.S. Forest Service and Virginia Polytechnic Institute and State University, in cooperation with the Wood Components Manufacturers Association.

Anatomy Education for the YouTube Generation

ERIC Educational Resources Information Center

Barry, Denis S.; Marzouk, Fadi; Chulak-Oglu, Kyrylo; Bennett, Deirdre; Tierney, Paul; O'Keeffe, Gerard W.

2016-01-01

Anatomy remains a cornerstone of medical education despite challenges that have seen a significant reduction in contact hours over recent decades; however, the rise of the "YouTube Generation" or "Generation Connected" (Gen C), offers new possibilities for anatomy education. Gen C, which consists of 80% Millennials, actively…

Learning Anatomy through Thiel- vs. Formalin-Embalmed Cadavers: Student Perceptions of Embalming Methods and Effect on Functional Anatomy Knowledge

ERIC Educational Resources Information Center

Kennel, Larissa; Martin, David M. A.; Shaw, Hannah; Wilkinson, Tracey

2018-01-01

Thiel-embalmed cadavers, which have been adopted for use in anatomy teaching in relatively few universities, show greater flexibility and color retention compared to formalin-embalmed cadavers, properties which might be considered advantageous for anatomy teaching. This study aimed to investigate student attitudes toward the dissection experience…

The Influence of Study Methods and Knowledge Processing on Academic Success and Long-Term Recall of Anatomy Learning by First-Year Veterinary Students

ERIC Educational Resources Information Center

Ward, Peter J.; Walker, James J.

2008-01-01

The purpose of this investigation was to quantitatively and qualitatively identify the study methods and learning strategies that veterinary students used to study anatomy during their first year of professional school and to correlate these with their academic achievement and long-term recall of information. It was surmised that active study…

7 CFR 160.10 - Sulphate wood turpentine.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 3 2014-01-01 2014-01-01 false Sulphate wood turpentine. 160.10 Section 160.10... STANDARDS FOR NAVAL STORES General § 160.10 Sulphate wood turpentine. The designation “sulphate wood... in the sulphate process of cooking wood pulp, and commonly known as sulphate turpentine or sulphate...

7 CFR 160.10 - Sulphate wood turpentine.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 3 2013-01-01 2013-01-01 false Sulphate wood turpentine. 160.10 Section 160.10... STANDARDS FOR NAVAL STORES General § 160.10 Sulphate wood turpentine. The designation “sulphate wood... in the sulphate process of cooking wood pulp, and commonly known as sulphate turpentine or sulphate...

7 CFR 160.10 - Sulphate wood turpentine.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 3 2012-01-01 2012-01-01 false Sulphate wood turpentine. 160.10 Section 160.10... STANDARDS FOR NAVAL STORES General § 160.10 Sulphate wood turpentine. The designation “sulphate wood... in the sulphate process of cooking wood pulp, and commonly known as sulphate turpentine or sulphate...

7 CFR 160.10 - Sulphate wood turpentine.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Sulphate wood turpentine. 160.10 Section 160.10... STANDARDS FOR NAVAL STORES General § 160.10 Sulphate wood turpentine. The designation “sulphate wood... in the sulphate process of cooking wood pulp, and commonly known as sulphate turpentine or sulphate...

7 CFR 160.10 - Sulphate wood turpentine.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 3 2011-01-01 2011-01-01 false Sulphate wood turpentine. 160.10 Section 160.10... STANDARDS FOR NAVAL STORES General § 160.10 Sulphate wood turpentine. The designation “sulphate wood... in the sulphate process of cooking wood pulp, and commonly known as sulphate turpentine or sulphate...

Michelangelo: anatomy and its implication in his art.

PubMed

Hilloowala, Rumy

2009-06-01

Michelangelo's major interest was the Life of the Soul as expressed in the beautiful structure and movement of the human body, which he often called the "mortal veil" of the divine intentions. This study ascertains Michelangelo's interest in and acquisition of the knowledge of human anatomy, the use of small anatomical models to crystallize his concepts into reality and the application of anatomy to his art. Relatively little is known of this interaction between anatomy and art in Michelangelo's life and work.

A unique, innovative, and clinically oriented approach to anatomy education.

PubMed

Drake, Richard L

2007-05-01

The establishment of The Cleveland Clinic Lerner College of Medicine of Case Western Reserve University, whose first class entered in 2004, provided a unique opportunity to design an anatomy program that, from all indications, is effective, time efficient, and clinically relevant in the context of a nonlecture, problem-based, organ-systems-oriented curriculum. Through consultation with surgery colleagues, the case-directed anatomy program was developed. This approach, meeting one day a week for 1 hour 50 minutes for 30 weeks, uses clinical cases to introduce anatomical information that is reinforced using prosected cadavers and imaging. The format of the approach involves three steps: (1) students preview a clinical case with clinical questions and learning objectives, (2) students acquire basic knowledge using textbooks and self-directed learning modules, and (3) students reinforce their basic knowledge in weekly case-directed anatomy sessions, which involve an interactive discussion of the clinical case followed by a laboratory. In the laboratory, students rotate around stations viewing prosected cadavers and imaging. Learning anatomy does not stop after the first year, because the program is longitudinal. During the second year, students review anatomy in each organ-system course using the first-year format. Also, second-year students can assist the fellows or residents prepare the prosections for first-year students and for their review of anatomy in the second year. This provides students with a dissection experience. During third-year clinical rotations, anatomy knowledge is reinforced, and several surgery anatomy electives are available during the final year. In this way, anatomy is learned and reinforced throughout the medical school curriculum.

Wood and Sediment Dynamics in River Corridors

NASA Astrophysics Data System (ADS)

Wohl, E.; Scott, D.

2015-12-01

Large wood along rivers influences entrainment, transport, and storage of mineral sediment and particulate organic matter. We review how wood alters sediment dynamics and explore patterns among volumes of instream wood, sediment storage, and residual pools for dispersed pieces of wood, logjams, and beaver dams. We hypothesized that: volume of sediment per unit area of channel stored in association with wood is inversely proportional to drainage area; the form of sediment storage changes downstream; sediment storage correlates most strongly with wood load; and volume of sediment stored behind beaver dams correlates with pond area. Lack of data from larger drainage areas limits tests of these hypotheses, but analyses suggest a negative correlation between sediment volume and drainage area and a positive correlation between wood and sediment volume. The form of sediment storage in relation to wood changes downstream, with wedges of sediment upstream from jammed steps most prevalent in small, steep channels and more dispersed sediment storage in lower gradient channels. Use of a published relation between sediment volume, channel width, and gradient predicted about half of the variation in sediment stored upstream from jammed steps. Sediment volume correlates well with beaver pond area. Historically more abundant instream wood and beaver populations likely equated to greater sediment storage within river corridors. This review of the existing literature on wood and sediment dynamics highlights the lack of studies on larger rivers.

NorWood: a gene expression resource for evo-devo studies of conifer wood development.

PubMed

Jokipii-Lukkari, Soile; Sundell, David; Nilsson, Ove; Hvidsten, Torgeir R; Street, Nathaniel R; Tuominen, Hannele

2017-10-01

The secondary xylem of conifers is composed mainly of tracheids that differ anatomically and chemically from angiosperm xylem cells. There is currently no high-spatial-resolution data available profiling gene expression during wood formation for any coniferous species, which limits insight into tracheid development. RNA-sequencing data from replicated, high-spatial-resolution section series throughout the cambial and woody tissues of Picea abies were used to generate the NorWood.conGenIE.org web resource, which facilitates exploration of the associated gene expression profiles and co-expression networks. Integration within PlantGenIE.org enabled a comparative regulomics analysis, revealing divergent co-expression networks between P. abies and the two angiosperm species Arabidopsis thaliana and Populus tremula for the secondary cell wall (SCW) master regulator NAC Class IIB transcription factors. The SCW cellulose synthase genes (CesAs) were located in the neighbourhoods of the NAC factors in A. thaliana and P. tremula, but not in P. abies. The NorWood co-expression network enabled identification of potential SCW CesA regulators in P. abies. The NorWood web resource represents a powerful community tool for generating evo-devo insights into the divergence of wood formation between angiosperms and gymnosperms and for advancing understanding of the regulation of wood development in P. abies. © 2017 The Authors. New Phytologist © 2017 New Phytologist Trust.

Untargeted Identification of Wood Type-Specific Markers in Particulate Matter from Wood Combustion.

PubMed

Weggler, Benedikt A; Ly-Verdu, Saray; Jennerwein, Maximilian; Sippula, Olli; Reda, Ahmed A; Orasche, Jürgen; Gröger, Thomas; Jokiniemi, Jorma; Zimmermann, Ralf

2016-09-20

Residential wood combustion emissions are one of the major global sources of particulate and gaseous organic pollutants. However, the detailed chemical compositions of these emissions are poorly characterized due to their highly complex molecular compositions, nonideal combustion conditions, and sample preparation steps. In this study, the particulate organic emissions from a masonry heater using three types of wood logs, namely, beech, birch, and spruce, were chemically characterized using thermal desorption in situ derivatization coupled to a GCxGC-ToF/MS system. Untargeted data analyses were performed using the comprehensive measurements. Univariate and multivariate chemometric tools, such as analysis of variance (ANOVA), principal component analysis (PCA), and ANOVA simultaneous component analysis (ASCA), were used to reduce the data to highly significant and wood type-specific features. This study reveals substances not previously considered in the literature as meaningful markers for differentiation among wood types.

Gliomas and exposure to wood preservatives.

PubMed Central

Cordier, S; Poisson, M; Gerin, M; Varin, J; Conso, F; Hemon, D

1988-01-01

A case-referent study was undertaken to look for occupational risk factors among patients with glioma treated in a neurological hospital in Paris between 1975 and 1984. In the study group were 125 men with gliomas (aged less than or equal to 65) and 238 patients (also less than or equal to 65) admitted for non-neoplastic, non-malformative vascular diseases in the same department during the same period constituting the reference group. All diagnoses were confirmed by tomodensitometry. Information on occupational history was obtained from a postal questionnaire and from medical records. Comparison of cases and referents showed a significant excess risk among teachers (OR = 4.1) and a raised risk among wood workers (OR = 1.6). Four of nine cases of glioma who had been employed as wood workers reported that a colleague had suffered from glioma (those reports were confirmed by hospital records). None were reported among 11 referent wood workers. Using a complementary questionnaire on wood work, exposure assessment to wood preservatives and solvents showed that frequent exposure to organochlorine wood preservatives and to organic solvents occurred more often among cases than referent wood workers (p less than 0.10). PMID:3196664

[Anatomy of the skull].

PubMed

Pásztor, Emil

2010-01-01

The anatomy of the human body based on a special teleological system is one of the greatest miracles of the world. The skull's primary function is the defence of the brain, so every alteration or disease of the brain results in some alteration of the skull. This analogy is to be identified even in the human embryo. Proportions of the 22 bones constituting the skull and of sizes of sutures are not only the result of the phylogeny, but those of the ontogeny as well. E.g. the age of the skeletons in archaeological findings could be identified according to these facts. Present paper outlines the ontogeny and development of the tissues of the skull, of the structure of the bone-tissue, of the changes of the size of the skull and of its parts during the different periods of human life, reflecting to the aesthetics of the skull as well. "Only the human scull can give me an impression of beauty. In spite of all genetical colseness, a skull of a chimpanzee cannot impress me aesthetically"--author confesses. In the second part of the treatise those authors are listed, who contributed to the perfection of our knowledge regarding the skull. First of all the great founder of modern anatomy, Andreas Vesalius, then Pierre Paul Broca, Jacob Benignus Winslow are mentioned here. The most important Hungarian contributors were as follow: Sámuel Rácz, Pál Bugát or--the former assistant of Broca--Aurél Török. A widely used tool for measurement of the size of the skull, the craniometer was invented by the latter. The members of the family Lenhossék have had also important results in this field of research, while descriptive anatomy of the skull was completed by microsopical anatomy thanks the activity of Géza Mihálkovits.

Anatomy and Physiology. Module Set I: Introduction to Anatomy and Physiology. Teacher Edition [and] Student Edition. Surgical Technology.

ERIC Educational Resources Information Center

Hilley, Robert

This document, which is the first part in a two-part set of modules on anatomy and physiology for future surgical technicians, contains the teacher and student editions of an introduction to anatomy and physiology that consists of modules on the following topics: (1) organization of the human body; (2) biochemistry and microbiology; (3) infection,…

Where Does Wood Most Effectively Enhance Storage? Network-Scale Distribution of Sediment and Organic Matter Stored by Instream Wood

NASA Astrophysics Data System (ADS)

Pfeiffer, Andrew; Wohl, Ellen

2018-01-01

We used 48 reach-scale measurements of large wood and wood-associated sediment and coarse particulate organic matter (CPOM) storage within an 80 km2 catchment to examine spatial patterns of storage relative to stream order. Wood, sediment, and CPOM are not distributed uniformly across the drainage basin. Third- and fourth-order streams (23% of total stream length) disproportionately store wood and coarse and fine sediments: 55% of total wood volume, 78% of coarse sediment, and 49% of fine sediment, respectively. Fourth-order streams store 0.8 m3 of coarse sediment and 0.2 m3 of fine sediment per cubic meter of wood. CPOM storage is highest in first-order streams (60% of storage in 47% of total network stream length). First-order streams can store up to 0.3 m3 of CPOM for each cubic meter of wood. Logjams in third- and fourth-order reaches are primary sediment storage agents, whereas roots in small streams may be more important for storage of CPOM. We propose the large wood particulate storage index to quantify average volume of sediment or CPOM stored by a cubic meter of wood.

Gender Bias in Human Anatomy Textbook Illustrations.

ERIC Educational Resources Information Center

Giacomini, M.; And Others

1986-01-01

Surveyed anatomy texts currently in use in a major western medical school. In text sections dealing with standard (nongender-specific) anatomy, male subjects were shown in 64 percent of the illustrations in which gender was discernible, females in ll percent, and gender-neutral representations, 25 percent. Females and males were represented…

Macroinvertebrate community assembly on deep-sea wood falls in Monterey Bay is strongly influenced by wood type.

PubMed

Judge, Jenna; Barry, James P

2016-11-01

Environmental filtering, including the influence of environmental constraints and biological interactions on species' survival, is known to significantly affect patterns of community assembly in terrestrial ecosystems. However, its role in regulating patterns and processes of community assembly in deep-sea environments is poorly studied. Here we investigated the role of wood characteristics in the assembly of deep-sea wood fall communities. Ten different wood species (substrata) that varied in structural complexity were sunk to a depth of 3,100 m near Monterey Bay, CA. In total, 28 wood parcels were deployed on the deep-sea bed. After 2 yr, the wood parcels were recovered with over 7,000 attached or colonizing macroinvertebrates. All macroinvertebrates were identified to the lowest taxonomic level possible, and included several undescribed species. Diversity indices and multivariate analyses of variance detected significant variation in the colonizing community assemblages among different wood substrata. Structural complexity seemed to be the primary factor altering community composition between wood substrata. For example, wood-boring clams were most abundant on solid logs, while small arthropods and limpets were more abundant on bundles of branches that provided more surface area and small, protected spaces to occupy. Other factors such as chemical defenses, the presence of bark, and wood hardness likely also played a role. Our finding that characteristics of woody debris entering the marine realm can have significant effects on community assembly supports the notion of ecological and perhaps evolutionarily significant links between land and sea. © 2016 by the Ecological Society of America.

[Imaging anatomy of cranial nerves].

PubMed

Hermier, M; Leal, P R L; Salaris, S F; Froment, J-C; Sindou, M

2009-04-01

Knowledge of the anatomy of the cranial nerves is mandatory for optimal radiological exploration and interpretation of the images in normal and pathological conditions. CT is the method of choice for the study of the skull base and its foramina. MRI explores the cranial nerves and their vascular relationships precisely. Because of their small size, it is essential to obtain images with high spatial resolution. The MRI sequences optimize contrast between nerves and surrounding structures (cerebrospinal fluid, fat, bone structures and vessels). This chapter discusses the radiological anatomy of the cranial nerves.

Assessment and management of dead-wood habitat

USGS Publications Warehouse

Hagar, Joan

2007-01-01

The Bureau of Land Management (BLM) is in the process of revising its resource management plans for six districts in western and southern Oregon as the result of the settlement of a lawsuit brought by the American Forest Resource Council. A range of management alternatives is being considered and evaluated including at least one that will minimize reserves on O&C lands. In order to develop the bases for evaluating management alternatives, the agency needs to derive a reasonable range of objectives for key issues and resources. Dead-wood habitat for wildlife has been identified as a key resource for which decision-making tools and techniques need to be refined and clarified. Under the Northwest Forest Plan, reserves were to play an important role in providing habitat for species associated with dead wood (U.S. Department of Agriculture Forest Service and U.S. Department of the Interior Bureau of Land Management, 1994). Thus, the BLM needs to: 1) address the question of how dead wood will be provided if reserves are not included as a management strategy in the revised Resource Management Plan, and 2) be able to evaluate the effects of alternative land management approaches. Dead wood has become an increasingly important conservation issue in managed forests, as awareness of its function in providing wildlife habitat and in basic ecological processes has dramatically increased over the last several decades (Laudenslayer et al., 2002). A major concern of forest managers is providing dead wood habitat for terrestrial wildlife. Wildlife in Pacific Northwest forests have evolved with disturbances that create large amounts of dead wood; so, it is not surprising that many species are closely associated with standing (snags) or down, dead wood. In general, the occurrence or abundance of one-quarter to one-third of forest-dwelling vertebrate wildlife species, is strongly associated with availability of suitable dead-wood habitat (Bunnell et al., 1999; Rose et al., 2001). In

Long term durability of wood-plastic composites made with chemically modified wood

Treesearch

Rebecca E. Ibach; Craig M. Clemons

2017-01-01

Wood-plastic composites (WPCs) have slower moisture sorption than solid wood, but over time moisture can impact the strength, stiffness, and decay of the composite. These changes will become increasingly important if WPCs are used in more challenging environments such as in ground-contact applications. There are several options for mitigating the moisture sorption of...

Papilian’s anatomy - celebrating six decades –

PubMed Central

DUMITRAŞCU, DINU IULIU; CRIVII, CARMEN BIANCA; OPINCARIU, IULIAN

2017-01-01

Victor Papilian was born an artist, during high school he studied music in order to become a violinist in two professional orchestras in Bucharest. Later on he enrolled in the school of medicine, being immediately attracted by anatomy. After graduating, with a briliant dissertation, he became a member of the faculty and continued to teach in his preferred field. His masters, Gh. Marinescu and Victor Babes, proposed him for the position of professor at the newly established Faculty of Medicine of Cluj. Here he reorganized the department radically, created an anatomy museum and edited the first dissection handbook and the first Romanian anatomy (descriptive and topographic) treatise, both books received with great appreciation. He received the Romanian Academy Prize. His knowledge and skills gained him a well deserved reputation and he created a prestigious school of anatomy. He published over 250 scientific papers in national and international journals, ranging from morphology to functional, pathological and anthropological topics. He founded the Society of Anthropology, with its own newsletter; he was elected as a member of the French Society of Anatomy. In parallel he had a rich artistic and cultural activity as writer and playwright: he was president of the Transylvanian Writers’ Society, editor of a literary review, director of the Cluj theater and opera, leader of a book club and founder of a symphony orchestra. PMID:28246506

Simulated long-term effects of varying tree retention on wood production, dead wood and carbon stock changes.

PubMed

Santaniello, Francesca; Djupström, Line B; Ranius, Thomas; Weslien, Jan; Rudolphi, Jörgen; Sonesson, Johan

2017-10-01

Boreal forests are an important source of timber and pulp wood, but provide also other products and services. Utilizing a simulation program and field data from a tree retention experiment in a Scots pine forest in central Sweden, we simulated the consequences during the following 100 years of various levels of retention on production of merchantable wood, dead wood input (as a proxy for biodiversity), and carbon stock changes. At the stand level, wood production decreased with increased retention levels, while dead wood input and carbon stock increased. We also compared 12 scenarios representing a land sharing/land sparing gradient. In each scenario, a constant volume of wood was harvested with a specific level of retention in a 100-ha landscape. The area not needed to reach the defined volume was set-aside during a 100-year rotation period, leading to decreasing area of set-asides with increasing level of retention across the 12 scenarios. Dead wood input was positively affected by the level of tree retention whereas the average carbon stock decreased slightly with increasing level of tree retention. The scenarios will probably vary in how they favor species preferring different substrates. Therefore, we conclude that a larger variation of landscape-level conservation strategies, also including active creation of dead wood, may be an attractive complement to the existing management. Copyright © 2017 Elsevier Ltd. All rights reserved.

Wood mimetic hydrogel beads for enzyme immobilization.

PubMed

Park, Saerom; Kim, Sung Hee; Won, Keehoon; Choi, Joon Weon; Kim, Yong Hwan; Kim, Hyung Joo; Yang, Yung-Hun; Lee, Sang Hyun

2015-01-22

Wood component-based composite hydrogels have potential applications in biomedical fields owing to their low cost, biodegradability, and biocompatibility. The controllable properties of wood mimetic composites containing three major wood components are useful for enzyme immobilization. Here, lipase from Candida rugosa was entrapped in wood mimetic beads containing cellulose, xylan, and lignin by dissolving wood components with lipase in [Emim][Ac], followed by reconstitution. Lipase entrapped in cellulose/xylan/lignin beads in a 5:3:2 ratio showed the highest activity; this ratio is very similar to that in natural wood. The lipase entrapped in various wood mimetic beads showed increased thermal and pH stability. The half-life times of lipase entrapped in cellulose/alkali lignin hydrogel were 31- and 82-times higher than those of free lipase during incubation under denaturing conditions of high temperature and low pH, respectively. Owing to their biocompatibility, biodegradability, and controllable properties, wood mimetic hydrogel beads can be used to immobilize various enzymes for applications in the biomedical, bioelectronic, and biocatalytic fields. Copyright © 2014 Elsevier Ltd. All rights reserved.

Damage Assessment of a Full-Scale Six-Story wood-frame Building Following Triaxial shake Table Tests

Treesearch

John W. van de Lindt; Rakesh Gupta; Shiling Pei; Kazuki Tachibana; Yasuhiro Araki; Douglas Rammer; Hiroshi Isoda

2012-01-01

In the summer of 2009, a full-scale midrise wood-frame building was tested under a series of simulated earthquakes on the world's largest shake table in Miki City, Japan. The objective of this series of tests was to validate a performance-based seismic design approach by qualitatively and quantitatively examining the building's seismic performance in terms of...

Kant on anatomy and the status of the life sciences.

PubMed

Olson, Michael J

2016-08-01

This paper contributes to recent interest in Kant's engagement with the life sciences by focusing on one corner of those sciences that has received comparatively little attention: physical and comparative anatomy. By attending to remarks spread across Kant's writings, we gain some insight into Kant's understanding of the disciplinary limitations but also the methodological sophistication of the study of anatomy and physiology. Insofar as Kant highlights anatomy as a paradigmatic science guided by the principle of teleology in the Critique of the Power of Judgment, a more careful study of Kant's discussions of anatomy promises to illuminate some of the obscurities of that text and of his understanding of the life sciences more generally. In the end, it is argued, Kant's ambivalence with regard to anatomy gives way to a pessimistic conclusion about the possibility that anatomy, natural history, and, by extension, the life sciences more generally might one day become true natural sciences. Copyright © 2016 Elsevier Ltd. All rights reserved.

Substitution potentials of recycled HDPE and wood particles from post-consumer packaging waste in Wood-Plastic Composites.

PubMed

Sommerhuber, Philipp F; Welling, Johannes; Krause, Andreas

2015-12-01

The market share of Wood-Plastic Composites (WPC) is small but expected to grow sharply in Europe. This raises some concerns about suitable wood particles needed in the wood-based panels industry in Europe. Concerns are stimulated by the competition between the promotion of wooden products through the European Bioeconomy Strategy and wood as an energy carrier through the Renewable Energy Directive. Cascade use of resources and valorisation of waste are potential strategies to overcome resource scarcity. Under experimental design conditions, WPC made from post-consumer recycled wood and plastic (HDPE) were compared to WPC made from virgin resources. Wood content in the polymer matrix was raised in two steps from 0% to 30% and 60%. Mechanical and physical properties and colour differences were characterized. The feasibility of using cascaded resources for WPC is discussed. Results indicate the technical and economic feasibility of using recycled HDPE from packaging waste for WPC. Based on technical properties, 30% recycled wood content for WPC is feasible, but economic and political barriers of efficient cascading of biomass need to be overcome. Copyright © 2015 Elsevier Ltd. All rights reserved.

Best teaching practices in anatomy education: A critical review.

PubMed

Estai, Mohamed; Bunt, Stuart

2016-11-01

In this report we review the range of teaching resources and strategies used in anatomy education with the aim of coming up with suggestions about the best teaching practices in this area. There is much debate about suitable methods of delivering anatomical knowledge. Competent clinicians, particularly surgeons, need a deep understanding of anatomy for safe clinical procedures. However, because students have had very limited exposure to anatomy during clinical training, there is a concern that medical students are ill-prepared in anatomy when entering clerkships and residency programs. Therefore, developing effective modalities for teaching anatomy is essential to safe medical practice. Cadaver-based instruction has survived as the main instructional tool for hundreds of years, however, there are differing views on whether full cadaver dissection is still appropriate for a modern undergraduate training. The limitations on curricular time, trained anatomy faculty and resources for gross anatomy courses in integrated or/and system-based curricula, have led many medical schools to abandon costly and time-consuming dissection-based instruction in favour of alternative methods of instruction including prosection, medical imaging, living anatomy and multimedia resources. To date, no single teaching tool has been found to meet curriculum requirements. The best way to teach modern anatomy is by combining multiple pedagogical resources to complement one another, students appear to learn more effectively when multimodal and system-based approaches are integrated. Our review suggests that certain professions would have more benefit from certain educational methods or strategies than others. Full body dissection would be best reserved for medical students, especially those with surgical career intentions, while teaching based on prosections and plastination is more suitable for dental, pharmacy and allied health science students. There is a need to direct future research

Moisture relations and physical properties of wood

Treesearch

Samuel V. Glass; Samuel L. Zelinka

2010-01-01

Wood, like many natural materials, is hygroscopic; it takes on moisture from the surrounding environment. Moisture exchange between wood and air depends on the relative humidity and temperature of the air and the current amount of water in the wood. This moisture relationship has an important influence on wood properties and performance. Many of the challenges of using...

Adhesives for Achieving Durable Bonds with Acetylated Wood

Treesearch

Charles Frihart; Rishawn Brandon; James Beecher; Rebecca Ibach

2017-01-01

Acetylation of wood imparts moisture durability, decay resistance, and dimensional stability to wood; however, making durable adhesive bonds with acetylated wood can be more difficult than with unmodified wood. The usual explanation is that the acetylated surface has fewer hydroxyl groups, resulting in a harder-to-wet surface and in fewer hydrogen bonds between wood...

Comparative study on liquefaction of creosote and chromated copper arsenate (CCA)-treated wood and untreated southern pine wood: effects of acid catalyst content, liquefaction time, temperature, and phenol to wood ratio

Treesearch

Hui Pan; Chung-Yun Hse; Todd F. Shupe

2009-01-01

Creosote- and chromated copper arsenate (CCA)-treated wood waste and untreated southern pine wood were liquefied with phenol and sulfuric acid. The effects of sulfuric acid content, liquefaction time, liquefaction temperature, and phenol to wood ratio on liquefaction rate (i.e., wood residue content) were investigated and analyzed by analysis of variance (...

Variability and reliability of the vastus lateralis muscle anatomy.

PubMed

D'Arpa, Salvatore; Toia, Francesca; Brenner, Erich; Melloni, Carlo; Moschella, Francesco; Cordova, Adriana

2016-08-01

The aims of this study are to investigate the variability of the morphological and neurovascular anatomy of the vastus lateralis (VL) muscle and to describe the relationships among its intramuscular partitions and with the other muscles of the quadriceps femoris. Clinical implications in its reliability as a flap donor are also discussed. In 2012, the extra- and intramuscular neurovascular anatomy of the VL was investigated in 10 cadaveric lower limbs. In three specimens, the segmental arterial pedicles were injected with latex of different colors to point out their anastomotic connections. The morphological anatomy was investigated with regard to the mutual relationship of the three muscular partitions and the relation of the VL with the other muscles of the quadriceps femoris. The VL has a segmental morphological anatomy. However, the fibers of its three partitions interconnect individually and with the other bellies of the quadriceps femoris, particularly, in several variable portions with the vastus intermedius and mainly in the posterior part of the VL. The lateral circumflex femoral artery and its branches have variable origin, but demonstrate constant segmental distribution. Intramuscular dissection and colored latex injections show a rich anastomotic vascular network among the three partitions. Moderate variability exists in both the myological and the neurovascular anatomy of the VL. Despite this variability, the anatomy of the VL always has a constant segmental pattern, which makes the VL a reliable flap donor. Detailed knowledge of the VL anatomy could have useful applications in a broad clinical field.

Recycling of decommissioned CCA-treated wood into value-added enigineered wood products

Treesearch

Todd F. Shupe; Chung-Yun Hse

2003-01-01

Chromatcd copper arsenate (CCA) treated wood has been most widely used in North America since the 1970's for many exterior application such as decks, fences, playground equipment, utility poles, and others. A large volume of CCA-treated wood is currently coming out of service. Traditional disposal methods such as landfilling and incineration are not without...

Anatomic and Quantitative Temporal Bone CT for Preoperative Assessment of Branchio-Oto-Renal Syndrome.

PubMed

Ginat, D T; Ferro, L; Gluth, M B

2016-12-01

We describe the temporal bone computed tomography (CT) findings of an unusual case of branchio-oto-renal syndrome with ectopic ossicles that are partially located in the middle cranial fossa. We also describe quantitative temporal bone CT assessment pertaining to cochlear implantation in the setting of anomalous cochlear anatomy associated with this syndrome.

Detailed anatomy knowledge: first step to approach petroclival meningiomas through the petrous apex. Anatomy lab experience and surgical series.

PubMed

Altieri, Roberto; Sameshima, Tetsuro; Pacca, Paolo; Crobeddu, Emanuela; Garbossa, Diego; Ducati, Alessandro; Zenga, Francesco

2017-04-01

Petroclival meningiomas are a challenge for neurosurgeons due to the complex anatomy of the region that is rich of vessels and nerves. A perfect and detailed knowledge of the anatomy is very demanding in neurosurgery, especially in skull base surgery. The authors describe the microsurgical anatomy to perform an anterior petrosectomy based on their anatomical and surgical experience and perform a literature review. The temporal bone is the most complex and fascinating bone of skull base. The apex is located in the angle between the greater wing of the sphenoid and the occipital bone. Removing the petrous apex exposes the clivus. The approach directed through the temporal bone in this anatomical area is referred to as an anterior petrosectomy. The area that must be drilled is the rhomboid fossa that is defined by the Kawase, premeatal, and postmeatal triangles. In Division of Neurosurgery - University of Turin, 130 patients, from August 2013 to September 2015, underwent surgical resection of intracranial meningiomas. In this group, we have operated 7 PCMs and 5 of these were approached performing an anterior petrosectomy with good results. In our conclusions, we feel that this surgery require an advanced knowledge of human anatomy and a specialized training in interpretation of radiological and microsurgical anatomy both in the dissection lab and in the operating room.

Wood for sound.

PubMed

Wegst, Ulrike G K

2006-10-01

The unique mechanical and acoustical properties of wood and its aesthetic appeal still make it the material of choice for musical instruments and the interior of concert halls. Worldwide, several hundred wood species are available for making wind, string, or percussion instruments. Over generations, first by trial and error and more recently by scientific approach, the most appropriate species were found for each instrument and application. Using material property charts on which acoustic properties such as the speed of sound, the characteristic impedance, the sound radiation coefficient, and the loss coefficient are plotted against one another for woods. We analyze and explain why spruce is the preferred choice for soundboards, why tropical species are favored for xylophone bars and woodwind instruments, why violinists still prefer pernambuco over other species as a bow material, and why hornbeam and birch are used in piano actions.

Normal and variant anatomy of the nasal tip.

PubMed

Ketcham, Amy S; Dobratz, Eric J

2012-04-01

A thorough understanding of nasal tip anatomy is a prerequisite to understanding the nuances of restructuring the nasal tip. The three-dimensional structural anatomy of the nasal tip is complex. Additionally, the interrelationship between these structures determines the ultimate form and function of the nasal tip. As a result, alteration of one structure in the tip will often lead to change in other portions of the nasal tip. This dynamic concept of anatomy in the nasal tip makes proper alteration of the nasal tip one of the most challenging tasks faced by a rhinoplasty surgeon. This article provides a fundamental knowledge of the normal anatomy of the tip structures and how their interaction with each other determines the shape and support of the lower portion of the nose. It also provides a description of some common variants of tip anatomy that cause patients to seek consultation for rhinoplasty. A proper understanding of the concepts presented provides a foundation to build on as the reader continues to explore the "nuances of the nasal tip." Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

OCT imaging of craniofacial anatomy in xenopus embryos (Conference Presentation)

NASA Astrophysics Data System (ADS)

Deniz, Engin; Jonas, Stephan M.; Griffin, John; Hooper, Michael C.; Choma, Michael A.; Khokha, Mustafa K.

2016-03-01

The etiology of craniofacial defects is incompletely understood. The ability to obtain large amounts of gene sequence data from families affected by craniofacial defects is opening up new ways to understand molecular genetic etiological factors. One important link between gene sequence data and clinical relevance is biological research into candidate genes and molecular pathways. We present our recent research using OCT as a nondestructive phenotyping modality of craniofacial morphology in Xenopus embryos, an important animal model for biological research in gene and pathway discovery. We define 2D and 3D scanning protocols for a standardized approach to craniofacial imaging in Xenopus embryos. We define standard views and planar reconstructions for visualizing normal anatomy and landmarks. We compare these views and reconstructions to traditional histopathology using alcian blue staining. In addition to being 3D, nondestructive, and having much faster throughout, OCT can identify craniofacial features that are lost during traditional histopathological preparation. We also identify quantitative morphometric parameters to define normative craniofacial anatomy. We also note that craniofacial and cardiac defects are not infrequently present in the same patient (e.g velocardiofacial syndrome). Given that OCT excels at certain aspects of cardiac imaging in Xenopus embryos, our work highlights the potential of using OCT and Xenopus to study molecular genetic factors that impact both cardiac and craniofacial development.

Experiences from the anatomy track in the ontology alignment evaluation initiative.

PubMed

Dragisic, Zlatan; Ivanova, Valentina; Li, Huanyu; Lambrix, Patrick

2017-12-04

One of the longest running tracks in the Ontology Alignment Evaluation Initiative is the Anatomy track which focuses on aligning two anatomy ontologies. The Anatomy track was started in 2005. In 2005 and 2006 the task in this track was to align the Foundational Model of Anatomy and the OpenGalen Anatomy Model. Since 2007 the ontologies used in the track are the Adult Mouse Anatomy and a part of the NCI Thesaurus. Since 2015 the data in the Anatomy track is also used in the Interactive track of the Ontology Alignment Evaluation Initiative. In this paper we focus on the Anatomy track in the years 2007-2016 and the Anatomy part of the Interactive track in 2015-2016. We describe the data set and the changes it went through during the years as well as the challenges it poses for ontology alignment systems. Further, we give an overview of all systems that participated in the track and the techniques they have used. We discuss the performance results of the systems and summarize the general trends. About 50 systems have participated in the Anatomy track. Many different techniques were used. The most popular matching techniques are string-based strategies and structure-based techniques. Many systems also use auxiliary information. The quality of the alignment has increased for the best performing systems since the beginning of the track and more and more systems check the coherence of the proposed alignment and implement a repair strategy. Further, interacting with an oracle is beneficial.

From gross anatomy to the nanomorphome: stereological tools provide a paradigm for advancing research in quantitative morphomics

PubMed Central

Mayhew, Terry M; Lucocq, John M

2015-01-01

The terms morphome and morphomics are not new but, recently, a group of morphologists and cell biologists has given them clear definitions and emphasised their integral importance in systems biology. By analogy to other ‘-omes’, the morphome refers to the distribution of matter within 3-dimensional (3D) space. It equates to the totality of morphological features within a biological system (virus, single cell, multicellular organism or populations thereof) and morphomics is the systematic study of those structures. Morphomics research has the potential to generate ‘big data’ because it includes all imaging techniques at all levels of achievable resolution and all structural scales from gross anatomy and medical imaging, via optical and electron microscopy, to molecular characterisation. As with other ‘-omics’, quantification is an important part of morphomics and, because biological systems exist and operate in 3D space, precise descriptions of form, content and spatial relationships require the quantification of structure in 3D. Revealing and quantifying structural detail inside the specimen is achieved currently in two main ways: (i) by some form of reconstruction from serial physical or tomographic slices or (ii) by using randomly-sampled sections and simple test probes (points, lines, areas, volumes) to derive stereological estimates of global and/or individual quantities. The latter include volumes, surfaces, lengths and numbers of interesting features and spatial relationships between them. This article emphasises the value of stereological design, sampling principles and estimation tools as a template for combining with alternative imaging techniques to tackle the ‘big data’ issue and advance knowledge and understanding of the morphome. The combination of stereology, TEM and immunogold cytochemistry provides a practical illustration of how this has been achieved in the sub-field of nanomorphomics. Applying these quantitative tools

Method of predicting mechanical properties of decayed wood

DOEpatents

Kelley, Stephen S.

2003-07-15

A method for determining the mechanical properties of decayed wood that has been exposed to wood decay microorganisms, comprising: a) illuminating a surface of decayed wood that has been exposed to wood decay microorganisms with wavelengths from visible and near infrared (VIS-NIR) spectra; b) analyzing the surface of the decayed wood using a spectrometric method, the method generating a first spectral data of wavelengths in VIS-NIR spectra region; and c) using a multivariate analysis to predict mechanical properties of decayed wood by comparing the first spectral data with a calibration model, the calibration model comprising a second spectrometric method of spectral data of wavelengths in VIS-NIR spectra obtained from a reference decay wood, the second spectral data being correlated with a known mechanical property analytical result obtained from the reference decayed wood.

Wood decomposition in Amazonian hydropower reservoirs: An additional source of greenhouse gases

NASA Astrophysics Data System (ADS)

Abril, Gwenaël; Parize, Marcelo; Pérez, Marcela A. P.; Filizola, Naziano

2013-07-01

Amazonian hydroelectric reservoirs produce abundant carbon dioxide and methane from large quantities of flooded biomass that decompose anaerobically underwater. Emissions are extreme the first years after impounding and progressively decrease with time. To date, only water-to-air fluxes have been considered in these estimates. Here, we investigate in two Amazonian reservoirs (Balbina and Petit Saut) the fate of above water standing dead trees, by combining a qualitative analysis of wood state and density through time and a quantitative analysis of the biomass initially flooded. Dead wood was much more decomposed in the Balbina reservoir 23 years after flooding than in the Petit Saut reservoir 10 years after flooding. Termites apparently played a major role in wood decomposition, occurring mainly above water, and resulting in a complete conversion of this carbon biomass into CO2 and CH4 at a timescale much shorter than reservoir operation. The analysis of pre-impounding wood biomass reveals that above-water decomposition in Amazonian reservoirs is a large, previously unrecognized source of carbon emissions to the atmosphere, representing 26-45% of the total reservoir flux integrated over 100 years. Accounting for both below- and above-water fluxes, we could estimate that each km2 of Amazonian forest converted to reservoir would emit over 140 Gg CO2-eq in 100 years. Hydropower plants in the Amazon should thus generate 0.25-0.4 MW h per km2 flooded area to produce lower greenhouse gas emissions than gas power plants. They also have the disadvantage to emit most of their greenhouse gases the earliest years of operation.

Respiratory symptoms and lung function in relation to wood dust and monoterpene exposure in the wood pellet industry.

PubMed

Löfstedt, Håkan; Hagström, Katja; Bryngelsson, Ing-Liss; Holmström, Mats; Rask-Andersen, Anna

2017-06-01

Wood pellets are used as a source of renewable energy for heating purposes. Common exposures are wood dust and monoterpenes, which are known to be hazardous for the airways. The purpose of this study was to study the effect of occupational exposure on respiratory health in wood pellet workers. Thirty-nine men working with wood pellet production at six plants were investigated with a questionnaire, medical examination, allergy screening, spirometry, and nasal peak expiratory flow (nasal PEF). Exposure to wood dust and monoterpenes was measured. The wood pellet workers reported a higher frequency of nasal symptoms, dry cough, and asthma medication compared to controls from the general population. There were no differences in nasal PEF between work and leisure time. A lower lung function than expected (vital capacity [VC], 95%; forced vital capacity in 1 second [FEV 1 ], 96% of predicted) was noted, but no changes were noted during shifts. There was no correlation between lung function and years working in pellet production. Personal measurements of wood dust at work showed high concentrations (0.16-19 mg/m 3 ), and exposure peaks when performing certain work tasks. Levels of monoterpenes were low (0.64-28 mg/m 3 ). There was no association between exposure and acute lung function effects. In this study of wood pellet workers, high levels of wood dust were observed, and that may have influenced the airways negatively as the study group reported upper airway symptoms and dry cough more frequently than expected. The wood pellet workers had both a lower VC and FEV 1 than expected. No cross-shift changes were found.

Respiratory symptoms and lung function in relation to wood dust and monoterpene exposure in the wood pellet industry

PubMed Central

Löfstedt, Håkan; Hagström, Katja; Bryngelsson, Ing-Liss; Holmström, Mats; Rask-Andersen, Anna

2017-01-01

Introduction Wood pellets are used as a source of renewable energy for heating purposes. Common exposures are wood dust and monoterpenes, which are known to be hazardous for the airways. The purpose of this study was to study the effect of occupational exposure on respiratory health in wood pellet workers. Materials and methods Thirty-nine men working with wood pellet production at six plants were investigated with a questionnaire, medical examination, allergy screening, spirometry, and nasal peak expiratory flow (nasal PEF). Exposure to wood dust and monoterpenes was measured. Results The wood pellet workers reported a higher frequency of nasal symptoms, dry cough, and asthma medication compared to controls from the general population. There were no differences in nasal PEF between work and leisure time. A lower lung function than expected (vital capacity [VC], 95%; forced vital capacity in 1 second [FEV1], 96% of predicted) was noted, but no changes were noted during shifts. There was no correlation between lung function and years working in pellet production. Personal measurements of wood dust at work showed high concentrations (0.16–19 mg/m3), and exposure peaks when performing certain work tasks. Levels of monoterpenes were low (0.64–28 mg/m3). There was no association between exposure and acute lung function effects. Conclusions In this study of wood pellet workers, high levels of wood dust were observed, and that may have influenced the airways negatively as the study group reported upper airway symptoms and dry cough more frequently than expected. The wood pellet workers had both a lower VC and FEV1 than expected. No cross-shift changes were found. PMID:28276782

Treatments that enhance physical properties of wood

Treesearch

Roger M. Rowell; Peggy Konkol

1987-01-01

This paper was prepared for anyone who wants to know more about enhancing wood’s physical properties, from the amateur wood carver to the president of a forest products company. The authors describe chemical and physical treatments of wood that enhance the strength, stiffness, water repellency, and stability of wood. Five types of treatments are described: 1. water-...

Physical properties and moisture relations of wood

Treesearch

William Simpson; Anton TenWolde

1999-01-01

The versatility of wood is demonstrated by a wide variety of products. This variety is a result of a spectrum of desirable physical characteristics or properties among the many species of wood. In many cases, more than one property of wood is important to the end product. For example, to select a wood species for a product, the value of appearance- type properties,...

Bioremediation of treated wood with fungi

Treesearch

Barbara L. Illman; Vina W. Yang

2006-01-01

The authors have developed technologies for fungal bioremediation of waste wood treated with oilborne or metal-based preservatives. The technologies are based on specially formulated inoculum of wood-decay fungi, obtained through strain selection to obtain preservative-tolerant fungi. This waste management approach provides a product with reduced wood volume and the...

Relating nanoindentation to macroindentation of wood

Treesearch

Robert J. Moon; Joseph E. Jakes; Jim F. Beecher; Charles R. Frihart; Donald S. Stone

2009-01-01

Wood has several levels of hierarchical structure, spanning from the configuration of growth-rings down to the configuration of the base polymers (cellulose, hemicellulose, and lignin). The bulk properties of wood result from the culmination of interactions over all length scales. Gaps presently exist in the fundamental knowledge relating the contribution of wood...

Postliver transplantation vascular and biliary surgical anatomy.

PubMed

Saad, Wael E A; Orloff, Mark C; Davies, Mark G; Waldman, David L; Bozorgzadeh, Adel

2007-09-01

Imaging and management of postliver transplantation complications require an understanding of the surgical anatomy of liver transplantation. There are several methods of liver transplantation. Furthermore, liver transplantation is a complex surgery with numerous variables in its 4 anastomoses: (1) arterial anastomosis, (2) venous inflow (portal venous) anastomosis, (3) venous outflow (hepatic vein, inferior vena cava, or both) anastomosis, and (4) biliary/biliary-enteric anastomosis. The aim of this chapter is to introduce the principles of liver transplant surgical anatomy based on anastomotic anatomy. With radiologists as the target readers, the chapter focuses on the inflow and outflow connections and does not detail intricate surgical techniques or intraoperative maneuvers, operative stages, or vascular shunting.

Anatomy and Biomechanics of the Unstable Shoulder

PubMed Central

Cuéllar, Ricardo; Ruiz-Ibán, Miguel Angel; Cuéllar, Adrián

2017-01-01

Purpose: To review the anatomy of the shoulder joint and of the physiology of glenohumeral stability is essential to manage correctly shoulder instability. Methods: It was reviewed a large number of recently published research studies related to the shoulder instability that received a higher Level of Evidence grade. Results: It is reviewed the bony anatomy, the anatomy and function of the ligaments that act on this joint, the physiology and physiopathology of glenohumeral instability and the therapeutic implications of the injured structures. Conclusion: This knowledge allows the surgeon to evaluate the possible causes of instability, to assess which are the structures that must be reconstructed and to decide which surgical technique must be performed. PMID:28979600

Wood Export and Deposition Dynamics in Mountain Watersheds

NASA Astrophysics Data System (ADS)

Senter, Anne Elizabeth

Wood dynamics that store, transport, break down, and ultimately export wood pieces through watershed networks are key elements of stream complexity and ecosystem health. Efforts to quantify wood processes are advancing rapidly as technological innovations in field data collection, remotely sensed data acquisition, and data analyses become increasingly sophisticated. The ability to extend the temporal and spatial scales of wood data acquisition has been particularly useful to the investigations presented herein. The primary contributions of this dissertation are focused on two aspects of wood dynamics: watershed-scale wood export processes as identified using the depositional environment of a mountain reservoir, and wood deposition mechanisms in a bedrock-dominated mountain river. Three chapters present this work: In Chapter 1, continuous video monitoring of wood in transport revealed seasonal and diurnal hydrologic cycle influences on the variable rates at which wood transports. This effort supports the efficacy of utilizing continuous data collection methods for wood transport studies. Annual wood export data were collected via field efforts and aerial image analyses from New Bullards Bar Reservoir on the North Yuba River, Sierra Nevada, California. Examination of data revealed linkages between decadal-scale climatic patterns, large flood events, and episodic wood export quantities. A watershed-specific relation between wood export quantities and annual peak discharge contributes to the notion that peak discharge is a primary control on wood export, and yielded prediction of annual wood export quantities where no data were available. Linkages between seasonality, climatic components, and hydrologic events that exert variable control on watershed scale wood responses are presented as a functional framework. An accompanying conceptual model supports the framework presumption that wood responses are influenced by seasonal variations in Mediterranean-montane climate

The Anatomy Competence Score--A New Marker for Anatomical Ability

ERIC Educational Resources Information Center

Schoeman, Scarpa; Chandratilake, Madawa

2012-01-01

The assessment of students' ability in gross anatomy is a complex process as it involves the measurement of multiple facets. In this work, the authors developed and introduced the Anatomy Competence Score (ACS), which incorporates the three domains of anatomy teaching and assessment namely: theoretical knowledge, practical 3D application of the…

The stress-strain relationships in wood and fiber-reinforced plastic laminae of reinforced glued-laminated wood beams

NASA Astrophysics Data System (ADS)

Tingley, Daniel Arthur

The reinforcement of wood and wood composite structural products to improve their mechanical properties has been in practice for many years. Recently, the use of high-strength fiber-reinforced plastic (FRP) as a reinforcement in such applications has been commercialized. The reinforcement is manufactured using a standard pultrusion process or alternatively a sheet-forming process commonly referred to as "pulforming". The high-modulus fibers are predominately unidirectional, although off-axis fibers are often used to enhance off-axis properties. The fibers used are either of a single type or multiple types, which are called "hybrids". Unidirectional, single, and hybrid fiber FRP physical properties and characteristics were compared to wood. Full-scale reinforced glulams were tested. Aramid-reinforced plastics (ARP) used as tensile reinforcements were found to be superior in strength applications to other types of FRP made with fiber, such as carbon and fiberglass. Carbon/aramid-reinforced plastic (CARP) was shown to be superior in both modulus and strength design situations. Fiberglass was shown to be suitable only in hybrid situations with another fiber such as aramid or carbon and only in limited use situations where modulus was a design criteria. The testing and analysis showed that the global response of reinforced glulam beams is controlled by localized strength variations in the wood such as slope of grain, knots, finger joints, etc. in the tensile zone. The elemental tensile strains in the extreme wood tensile laminae, due to global applied loads, were found to be well below the strain at failure in clear wood samples recovered from the failure area. Two areas affecting the relationship between the wood and the FRP were investigated: compatibility of the wood and FRP materials and interface characteristics between the wood and FRP. The optimum strain value at yield point for an FRP was assessed to be slightly higher than the clear wood value in tension for a

Downed wood in Micronesian mangrove forests

USGS Publications Warehouse

Allen, J.A.; Ewel, K.C.; Keeland, B.D.; Tara, T.; Smith, T. J.

2000-01-01

Dead, downed wood is an important component of upland forest and aquatic ecosystems, but its role in wetland ecosystems, including mangroves, is poorly understood. We measured downed wood in ten sites on the western Pacific islands of Kosrae, Pohnpei, and Yap, all located within the Federated States of Micronesia. Our goals were to examine patterns of variability in the quantity of downed wood in these mangrove ecosystems, provide a general characterization of downed wood in a region with no previously published accounts, and investigate the relationship between harvesting practices and the amount of downed wood. The overall mean volume of downed wood at our study sites was estimated to be 60.8 m3 ha-1 (20.9 t ha-1), which is greater than most published data for forested wetlands. There were significant differences among islands, with the sites on Kosrae (104.2 m3 ha-1) having a much greater mean volume of downed wood than those on Pohnpei (43.1 m3 ha-1) or Yap (35.1 m3 ha-1). Part of the difference among islands may be attributable to differences in stand age and structure, but the most important factor seems to be the greater amount of wood harvesting on Kosrae, coupled with a low efficiency of use of cut trees. Of a total of 45 cut trees examined on Kosrae, no wood had been removed from 18 (40%); these are believed to be trees cut down because other, more valuable, trees were caught on them as they were felled. Of the other 27 trees, only 24 to 42% of the stem volume (to a 10 cm top) was removed from the forest, the amount varying by species. The impacts of current harvesting practices are unknown but may include important effects on tree regeneration and the abundance and species composition of crab populations.

Safranine fluorescent staining of wood cell walls.

PubMed

Bond, J; Donaldson, L; Hill, S; Hitchcock, K

2008-06-01

Safranine is an azo dye commonly used for plant microscopy, especially as a stain for lignified tissues such as xylem. Safranine fluorescently labels the wood cell wall, producing green/yellow fluorescence in the secondary cell wall and red/orange fluorescence in the middle lamella (ML) region. We examined the fluorescence behavior of safranine under blue light excitation using a variety of wood- and fiber-based samples of known composition to interpret the observed color differentiation of different cell wall types. We also examined the basis for the differences in fluorescence emission using spectral confocal microscopy to examine lignin-rich and cellulose-rich cell walls including reaction wood and decayed wood compared to normal wood. Our results indicate that lignin-rich cell walls, such as the ML of tracheids, the secondary wall of compression wood tracheids, and wood decayed by brown rot, tend to fluoresce red or orange, while cellulose-rich cell walls such as resin canals, wood decayed by white rot, cotton fibers and the G-layer of tension wood fibers, tend to fluoresce green/yellow. This variation in fluorescence emission seems to be due to factors including an emission shift toward red wavelengths combined with dye quenching at shorter wavelengths in regions with high lignin content. Safranine fluorescence provides a useful way to differentiate lignin-rich and cellulose-rich cell walls without counterstaining as required for bright field microscopy.

Juvenile wood effect in red alder : analysis of physical and mechanical data to delineate juvenile and mature wood zones

Treesearch

Joel W. Evans; John F. Senft; David W. Green

2000-01-01

The objective of this study was to investigate the influence of juvenile wood on the mechanical and physical properties of red alder. Tree growth in the first 10 to 20 years, usually referred to as juvenile wood, often influences wood quality by adversely affecting mechanical strength properties. Strength can be reduced up to 50 percent by the presence of juvenile wood...

Development of wood decay in wound-initiated discolored wood of eastern red cedar

Treesearch

Walter C. Shortle; Kenneth R. Dudzik; Kevin T. Smith

2010-01-01

Logs of eastern red cedar, Juniperus virginiana L., with well-developed bands of light-colored wood ("included sapwood") within heartwood can be unsuitable for sawn wood products. This finding is in contrast to published information that the "included sapwood" is (1) a heartwood anomaly rather than sapwood and (2) its occurrence...

Woods Hole Science Aquarium: VOLUNTEERS

Science.gov Websites

Turtle Conservation Woods Hole Seals NEFSC Volunteering in the Woods Hole Science Aquarium Feeding a , although occasionally there may be a short waiting period. Anyone interested in volunteering may contact

Medical student responses to clinical procedure teaching in the anatomy lab.

PubMed

Wilson, Donald R; Nava, Pedro B

2010-03-01

the teaching of gross anatomy to first-year medical students has progressed from a 'stand-alone' discipline to one with much clinical emphasis. The curriculum at Loma Linda University School of Medicine has had increasing clinical correlates in recent years. We decided to supplement this with procedure demonstrations early in the course, and measure the student response. clinical procedures were performed on cadavers in the anatomy lab. For example, pleural and pericardial effusions were simulated by placing bags of intravenous fluid in the pleural and pericardial cavities; pneumothorax and tension pneumothorax were simulated using an inflatable rubber bladder. Videos were made and then presented in sequence with gross anatomy lectures. The student response was evaluated with a survey sheet. the Student response was overwhelmingly positive, with all students stating that the presentations made anatomy more relevant, and most indicating that anatomy also became easier to learn. Feedback confirmed that first-year medical students have a strong clinical orientation, which can facilitate both the teaching and learning of gross anatomy. advantages of having clinicians present simulated procedures in the anatomy lab include: heightened student interest; mentoring and modelling for students; introduction to clinical concepts now encountered in basic science examinations; supplementation of the thinning ranks of qualified gross anatomy teachers. The use of intravenous fluid bags and distensible bladders to simulate abnormal collections of fluid and air in body cavities is simple, inexpensive, and can be replicated in any anatomy lab. Blackwell Publishing Ltd 2010.

The extractives of Pinus pinaster wood

Treesearch

Richard W. Hemingway; W. E. Hillis; L. S. Lau

1973-01-01

The extractives in Pinus pinaster wood grown in South Australia were examined as part of an assessment of the suitability of this wood for manufacture of absorbent tissues from bisulphite pulps. The average petroleum solubility of the wood was 2.0% but the amount and composition of the petroleum extract varied widely depending upon the age of the...

Effects of Acid Deposition on Wood

Treesearch

Mark Knaebe

2013-01-01

Since acid deposition increases the rate of deterioration of unpainted wood, it can also affect the performance of paint applied to this weathered wood. In tests conducted near Madison, Wisconsin, smooth-planed wood was allowed to weather before painting. Exposure for as little as 2 weeks shortened the service life of the subsequently applied paint. The paint bond was...

Wood properties affecting finish service life

Treesearch

R. Sam Williams; Charles Jourdain; George I. Daisey; Robert W. Springate

2000-01-01

Wood is a biological material that has widely different properties depending on species, geographic area where the tree grew, the growth conditions, size of the tree at harvest, sawing, and other manufacturing processes. Some of the more important wood properties as they relate to wood finishing are discussed, e.g., growth rate, density, knots, extractives, juvenile...

Ecosystem processes related to wood decay

Treesearch

Bruce G. Marcot

2017-01-01

Wood decay elements include snags, down wood, root wads, tree stumps, litter, duff, broomed or diseased branches, and partially dead trees, all of which contribute to ecological processes and biodiversity of the forest ecosystem. Down wood can serve as reservoirs for moisture and mycorrhizal fungi beneficial to the health and growth of commercial tree species. Decaying...

Wood structure and adhesive bond strength

Treesearch

Charles R. Frihart

2006-01-01

Much of the literature on the bonding of wood and other lignocellulosic materials has concentrated on traditional adhesion theories. This has led to misconceptions because wood is a porous material on both the macroscopic and microscopic levels. A better understanding of wood bonding can be developed by investigating the theories of adhesion and bond strength, taking...

Practical session assessments in human anatomy: Weightings and performance.

PubMed

McDonald, Aaron C; Chan, Siew-Pang; Schuijers, Johannes A

2016-07-08

Assessment weighting within a given module can be a motivating factor for students when deciding on their commitment level and time given to study a specific topic. In this study, an analysis of assessment performances of second year anatomy students was performed over four years to determine if (1) students performed better when a higher weighting was given to a set of practical session assessments and (2) whether an improved performance in the practical session assessments had a carry-over effect on other assessment tasks within that anatomy module and/or other anatomy modules that follow. Results showed that increasing the weighting of practical session assessments improved the average mark in that assessment and also improved the percentage of students passing that assessment. Further, it significantly improved performance in the written end-semester examination within the same module and had a carry-over effect on the anatomy module taught in the next teaching period, as students performed better in subsequent practical session assessments as well as subsequent end-semester examinations. It was concluded that the weighting of assessments had significant influences on a student's performance in that, and subsequent, assessments. It is postulated that practical session assessments, designed to develop deep learning skills in anatomy, improved efficacy in student performance in assessments undertaken in that and subsequent anatomy modules when the weighting of these assessments was greater. These deep learning skills were also transferable to other methods of assessing anatomy. Anat Sci Educ 9: 330-336. © 2015 American Association of Anatomists. © 2015 American Association of Anatomists.

Oral anatomy laboratory examinations in a physical therapy program.

PubMed

Fabrizio, Philip A

2013-01-01

The process of creating and administering traditional tagged anatomy laboratory examinations is time consuming for instructors and limits laboratory access for students. Depending on class size and the number of class, sections, creating, administering, and breaking down a tagged laboratory examination may involve one to two eight-hour days. During the time that a tagged examination is being created, student productivity may be reduced as the anatomy laboratory is inaccessible to students. Further, the type of questions that can be asked in a tagged laboratory examination may limit student assessment to lower level cognitive abilities and may limit the instructors' ability to assess the students' understanding of anatomical and clinical concepts. Anatomy is a foundational science in the Physical Therapy curriculum and a thorough understanding of anatomy is necessary to progress through the subsequent clinical courses. Physical therapy curricula have evolved to reflect the changing role of physical therapists to primary caregivers by introducing a greater scope of clinical courses earlier in the curriculum. Physical therapy students must have a thorough understanding of clinical anatomy early in the education process. However, traditional anatomy examination methods may not be reflective of the clinical thought processes required of physical therapy students. Traditional laboratory examination methods also reduce student productivity by limiting access during examination set-up and breakdown. To provide a greater complexity of questions and reduced overall laboratory time required for examinations, the Physical Therapy Program at Mercer University has introduced oral laboratory examinations for the gross anatomy course series. © 2012 American Association of Anatomists.

Multifactorial antimicrobial wood protectants

Treesearch

Robert D. Coleman; Carol A. Clausen

2008-01-01

It is unlikely that a single antimicrobial compound, whether synthetic or natural, will provide the ‘magic bullet’ for eliminating multiple biological agents affecting wood products. Development of synergistic combinations of selected compounds, especially those derived from natural sources, is recognized as a promising approach to improved wood protection. Recent...

Wood-based composite materials : panel products, glued-laminated timber, structural composite lumber, and wood-nonwood composite materials

Treesearch

Nicole M. Stark; Zhiyong Cai; Charles Carll

2010-01-01

This chapter gives an overview of the general types and composition of wood-based composite products and the materials and processes used to manufacture them. It describes conventional wood-based composite panels and structural composite materials intended for general construction, interior use, or both. This chapter also describes wood–nonwood composites. Mechanical...

Wood-Based Nanocomposite Derived by in Situ Formation of Organic-Inorganic Hybrid Polymer within Wood via a Sol-Gel Method.

PubMed

Dong, Xiaoying; Zhuo, Xiao; Wei, Jie; Zhang, Gang; Li, Yongfeng

2017-03-15

Solid wood materials and wood-plastic composites as two kinds of lightweight materials are attracting great interest from academia and industry due to their green and recycling nature. However, the relatively lower specific strength limits their wider applications. In particular, solid wood is vulnerable to moisture and decay fungi in nature, resulting in its poor durability for effectively long-term utilization. Inspired from the porous structure of wood, we propose a new design to build a wood-based nanocomposite with higher specific strength and satisfactory durability by in situ generation of organic-inorganic hybrid polymer within wood via a sol-gel method. The derived composite has 50-1200% improvement of impact toughness, 56-192% improvement of tensile strength, and 110-291% improvement of flexural strength over those of typical wood-plastic composites, respectively; and even 34% improvement of specific tensile strength than that of 36A steel; 208% enhancement of hardness; and 156% enhancement of compression strength than those of compared solid wood, respectively; as well as significantly improved dimensional stability and decay resistance over those of untreated natural wood. Such materials could be potentially utilized as lightweight and high-strength materials for applications in construction and automotive industries. This method could be extended to constitute other inorganic nanomaterials for novel organic-inorganic hybrid polymer within wood.

Digital dissection system for medical school anatomy training