INTERIOR VIEW, NORTH QUARRY, LOOKING NORTH TOWARDS THE SITE OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

INTERIOR VIEW, NORTH QUARRY, LOOKING NORTH TOWARDS THE SITE OF THE HISTORIC THOMAS FURNACES WITH ACTIVE DOLOMITE EXTRACTION ONGOING IN THE FOREGROUND. FURNACE FOUNDATION RUINS ARE PICTURED ON THE TOP LEDGE (CENTER LEFT) OF THE QUARRY. ALSO PICTURED IS THE HISTORIC THOMAS COKEWORKERS WITH (LEFT TO RIGHT) THE POWER PLANT, BOILER HOUSE, AND COKEWORKS. JUST SOUTH OF THE COKEWORKS, IS AN ACTIVE DOLOMITE CRUSHING, SIZING, AND SCREENING PLANT - Wade Sand & Gravel Company, North Quarry, State Highway 78, Thomas, Jefferson County, AL

INTERIOR VIEW, NORTH QUARRY, LOOKING NORTH TOWARDS THE SITE OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

INTERIOR VIEW, NORTH QUARRY, LOOKING NORTH TOWARDS THE SITE OF THE HISTORIC THOMAS FURNACES WITH ACTIVE DOLOMITE EXTRACTION ONGOING IN THE FOREGROUND. FURNACE FOUNDATION RUINS ARE PICTURED ON THE TOP LEDGE (CENTER LEFT) OF THE QUARRY. ALSO PICTURED IS THE HISTORIC THOMAS COKEWORKS WITH (LEFT TO RIGHT) THE POWER PLANT, BOILER HOUSE, AND COKEWORKS. JUST SOUTH OF THE COKEWORKS IS AN ACTIVE DOLOMITE CRUSHING, SIZING, AND SCREENING PLANT. - Wade Sand & Gravel Company, North Quarry, State Highway 78, Thomas, Jefferson County, AL

Field evidence for control of quarrying by rock bridges in jointed bedrock

NASA Astrophysics Data System (ADS)

Hooyer, T. S.; Cohen, D. O.; Iverson, N. R.

2011-12-01

Quarrying is generally thought to be the most important mechanism by which glaciers erode bedrock. In quarrying models it is assumed that slow, subcritical, growth of pre-existing cracks rate-limits the process and occurs where there are large stress differences in the bed, such as near rock bumps where ice separates from the bed to form water-filled cavities. Owing to the direction of principal stresses in rocks associated with sliding and resultant cavity formation, models predict that quarrying will occur along cracks oriented perpendicular to the ice flow direction or parallel to zones of ice-bed contact. Preglacial cracks in rocks will tend to propagate mainly downward, and in sedimentary or some metamorphic rocks will merge with bedding planes, thereby helping to isolate rock blocks for dislodgement. In contrast to these model assumptions, new measurements of quarried surface orientations in the deglaciated forefield of nine glaciers in Switzerland and Canada indicate a strong correlation between orientations of pre-existing joints and quarried bedrock surfaces, independent of ice flow direction or ice-water contact lines. The strong correlation persists across all rock types, and rocks devoid of major joints lack quarried surfaces. We propose a new conceptual model of quarrying that idealizes the bedrock as a series of blocks separated by discontinuous preglacial joints containing intact rock bridges. Bridges concentrate stress differences caused by normal and shear forces acting at the rock surface. Failure of bridges is caused by slow subcritical crack growth enhanced by water pressure fluctuations. To lend credibility to this new model, we show field evidence of failed rock bridges in quarried surfaces and of rib marks on plumose structures that we interpret as arrest fracture fronts due to transient subglacial water-pressure fluctuations.

7 CFR 330.105 - Inspection.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY... products; soil; stone and quarry products under § 330.300; garbage; and any other product or article of any...; soil; stone or quarry products under § 330.300; garbage; or other products or articles which an...

7 CFR 330.105 - Inspection.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY... products; soil; stone and quarry products under § 330.300; garbage; and any other product or article of any...; soil; stone or quarry products under § 330.300; garbage; or other products or articles which an...

7 CFR 330.105 - Inspection.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY... products; soil; stone and quarry products under § 330.300; garbage; and any other product or article of any...; soil; stone or quarry products under § 330.300; garbage; or other products or articles which an...

7 CFR 330.105 - Inspection.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY... products; soil; stone and quarry products under § 330.300; garbage; and any other product or article of any...; soil; stone or quarry products under § 330.300; garbage; or other products or articles which an...

7 CFR 330.105 - Inspection.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY... products; soil; stone and quarry products under § 330.300; garbage; and any other product or article of any...; soil; stone or quarry products under § 330.300; garbage; or other products or articles which an...

INTERIOR VIEW, NORTH QUARRY, LOOKING WEST. IN THE FOREGROUND ON ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

INTERIOR VIEW, NORTH QUARRY, LOOKING WEST. IN THE FOREGROUND ON THE FIRST BENCH, POWDER HILLS ARE PRIMED FOR DOLOMITE EXTRACTION. ON THE SECOND BENCH, THE DRILL TEAM IS LAYING OUT THE NEXT SHOTS. - Wade Sand & Gravel Company, North Quarry, State Highway 78, Thomas, Jefferson County, AL

Anciet marble quarries in Lesvos island Greece

NASA Astrophysics Data System (ADS)

Mataragkas, M.; Mataragkas, D.

2009-04-01

ANCIENT MARBLE QUARRIES IN LESBOS ISLAND, GREECE Varti- Matarangas M.1 & Matarangas D. 1 Institute of Geological and Mining Exploration (IGME), Olympic Village, Entrance C, ACHARNAE 13677, GREECE myrsini@igme.gr , myrsini@otenet.g r A B S T R A C T Ten ancient marble quarries of Lesbos Island, most of them previously unknown, have been studied, in the frame of the research study on the ancient marble quarries in the Aegean Sea. In the present paper the geological, petrological and morphological features of the aforementioned quarries are examined. Concerning the six ancient quarries located in the areas of Tarti, Agia Paraskevi (Tsaf), Mageiras, Loutra, Latomi (Plomari) and Thermi, the authochthonous neopaleozoic unit constitutes their geological formation, while their hosting lithological formations are the included crystalline limestone lens like beds. In two ancient quarries in the areas Moria and Alyfanta, the geological formation is the authochthonous upper Triassic series and the hosting lithological formation the upper Triassic carbonate sequence, while in the areas of Akrasi-Abeliko and Karyni, the geological formation is the thrust Triassic unit and the lithological hosting formations are the included strongly deformed or not crystalline limestone lenticular beds. Furthermore, the petrographic features were also determined permitting the identification of the building stones that have been used.

Lung function impact from working in the pre-revolution Libyan quarry industry.

PubMed

Draid, Marwan M; Ben-Elhaj, Khaled M; Ali, Ashraf M; Schmid, Kendra K; Gibbs, Shawn G

2015-05-07

The purpose of this study was to determine the lung impact from working within the Libyan quarry industry, and if the length of work impacted the degree of degradation. Eighty three workers from eight silica quarries in the Nafusa Mountains of Libya opted to participate. These quarries were working the upper cretaceous geological structure. Eighty-five individuals who lived in Gharyan City with no affiliation to quarry operations participated as controls. Spirometry variables evaluated were Forced Vital Capacity (FVC), Forced Expiratory Volume at 1.0 second (FEV1), FVC/FEV1 and Peak Expiratory Flow (PEF). Control and exposed groups had no differences in terms of height, weight, or smoking status (p = 0.18, 0.20, 0.98, respectively). Prior to adjustment for other variables, FVC, FEV1, and PEF are all significantly lower in the exposed group (p = 0.003, 0.009, 0.03, respectively). After adjustment for age, height, weight, and smoking status, there remain significant differences between the control and exposed groups for FVC, FEV1, and PEF. This analysis demonstrated that exposure to quarry dust has a detrimental effect on lung function, and that pre-revolution Libyan quarry workers were being exposed. This study shows that any exposure is harmful, as the reduction in lung function was not significantly associated with years of exposure.

Simulation of the effects of nearby quarrying operations on ground-water flow at the South Well Field, Franklin County, Ohio

USGS Publications Warehouse

Nalley, Gregory M.; Haefner, Ralph J.

1999-01-01

The City of Columbus, Ohio, operates a municipal well field in southern Franklin County that is adjacent to a sand and gravel mining operation. Mining operations have the potential to alter ground-water flowpaths and change the sources of water to pumped wells. Previous ground-water-flow modeling of the area has shown that water pumped from the supply wells is derived from infiltration from nearby rivers and surrounding bedrock. Some of that water flows through existing quarries. Because water quality differs among these sources and is affected by the path along which water flows to the wells, five flow conditions were simulated to evaluate the influence of different mining scenarios on sources of water as related to the size and shape of contributing recharge areas (CRAs) to wells. The first simulation was based on a revision of an existing model by Schalk (1996). The second and third simulations included one in which a 20-foot layer of undisturbed aquifer material within the quarry above the bedrock is left intact, and another in which the 20-foot layer is removed. The fourth and fifth simulations included one in which the 20-foot layer of undisturbed aquifer material is left above the bedrock and the quarry is backfilled with fine- grained sand and silt (a byproduct of the mining operations), and another in which the 20-foot layer is removed before the quarry is backfilled with the fine-grained sand and silt. The results of the five model simulations indicate that the overall volumetric budgets among models change only slightly in response to changing conditions at the quarry. The most significant change is noted in the amount of water that the aquifers gained from constant head and river leakage. This change is due to the way the quarries were simulated and lower heads in the aquifers compared to those in simulations made with earlier models. Previously published model simulations showed that the 5-year CRAs did not extend into the area of the newest sand and gravel quarry. In this study, however, the size and shape of the CRAs differ in response to the addition of two supply wells, and the 5-year CRA for one of these wells intersects the sand and gravel quarry. Particle-tracking analysis indicates that the proportions of water from the principal water sources -- rivers, other quarries (excluding the quarry of interest), and bedrock -- stayed relatively constant among the model simulations. The number of particles that originate in the quarry of interest increased from about 1 percent of the total particles withdrawn through all wells when the 20-foot layer of undisturbed aquifer material was left intact, to 2 percent when the 20-foot layer was removed. In simulations in which the quarry of interest was filled with fine-grained sand and silt, the percentage of particles that travel through or originate in that quarry decreased to less than 1 percent of the total number of particles. Thus, the mining activities at the quarry of interest, combined with increased pumping at the two supply wells have only a small potential to change the overall water quality of water withdrawn from supply wells at the South Well Field.

Geometry of surface fractures along the Mervine Anticline in Kay County, north central Oklahoma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hobbs, R.D.; Cemen, I.; Rizer, W.D.

1993-02-01

Surface fractures in the Lower Permian Barneston Formation are well exposed at three quarries in Kay County, north central Oklahoma. The three quarries are located along the Mervine Anticline which is a broad, assymmetric, low amplitude drape-like fold over a N20E trending sub-surface fault. The most northerly of the three quarries is at the axial surface trace of the anticline. The second quarry is one mile to the west and the third quarry is one-quarter mile to the east of the axial surface trace. In each quarry, a representative area of about 7,850 square feet was chosen for detailed mappingmore » of the surface fractures. In each representative area, the authors divided the surface fractures into what they termed as primary' and secondary' fractures. Traverse and area sampling methods were used to collect quantitative data on the joint orientation and frequency. The primary fractures are orthogonal and have a visible opening, while the secondary fractures have little or no opening. The primary fractures, the orthogonal sets, strike N30W and N75E. The secondary fractures show a slight preferred orientation along N65E although the overall distribution is random. These observations suggest that a similar fracture geometry exists in all three quarries. However, in one quarry the authors observed that fracture surfaces of the N30W striking set are inclined and their formation may have been influenced by movement along the proposed subsurface fault in the area.« less

77 FR 12004 - Stanislaus National Forest, CA; Notice of Intent To Prepare an Environmental Impact Statement for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-28

... Prepare an Environmental Impact Statement for Candy Rock Quarry Management AGENCY: Forest Service, USDA... Forest proposes to set permanent limitations on recreational target shooting at Candy Rock Quarry near... an appropriate activity at Candy Rock Quarry in the context of safety, public health, and applicable...

77 FR 14426 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-09

... Granite Company, LLC, 369 North State Street, Concord, New Hampshire 03301. Mine: Swenson Granite gray... Swenson Granite Gray Quarry is an open dimensional granite quarry operating fixed stiffleg derricks to... granite product if it can not be seen. (6) The quarry employees direct all derrick moves and positioning...

Strength Characteristics of Quarry Dust in Replacement of Sand

NASA Astrophysics Data System (ADS)

Shyam Prakash, K.; Hanumantha Rao, Ch, Dr

2017-08-01

The replacement of natural fine aggregate by using quarry dust leads to consumption of generated quarry dust, the requirement of land fill area can be reduced and solves the natural sand scarcity problem. The sand availability as a fine aggregate at low cost which needs the reason to search as a alternative material. Even it causes saddle to dump the crusher dust at one place which causes environmental pollution. The chemical analysis, specific gravity, sieve analysis and compressive strength is identified for various percentage and grades of concrete by replacement of sand with quarry dust.

Lung Function Impact from Working in the Pre-Revolution Libyan Quarry Industry

PubMed Central

Draid, Marwan M.; Ben-Elhaj, Khaled M.; Ali, Ashraf M.; Schmid, Kendra K.; Gibbs, Shawn G.

2015-01-01

The purpose of this study was to determine the lung impact from working within the Libyan quarry industry, and if the length of work impacted the degree of degradation. Eighty three workers from eight silica quarries in the Nafusa Mountains of Libya opted to participate. These quarries were working the upper cretaceous geological structure. Eighty-five individuals who lived in Gharyan City with no affiliation to quarry operations participated as controls. Spirometry variables evaluated were Forced Vital Capacity (FVC), Forced Expiratory Volume at 1.0 second (FEV1), FVC/FEV1 and Peak Expiratory Flow (PEF). Control and exposed groups had no differences in terms of height, weight, or smoking status (p = 0.18, 0.20, 0.98, respectively). Prior to adjustment for other variables, FVC, FEV1, and PEF are all significantly lower in the exposed group (p = 0.003, 0.009, 0.03, respectively). After adjustment for age, height, weight, and smoking status, there remain significant differences between the control and exposed groups for FVC, FEV1, and PEF. This analysis demonstrated that exposure to quarry dust has a detrimental effect on lung function, and that pre-revolution Libyan quarry workers were being exposed. This study shows that any exposure is harmful, as the reduction in lung function was not significantly associated with years of exposure. PMID:25961801

Geological-Technical and Geo-engineering Aspects of Dimensional Stone Underground Quarrying

NASA Astrophysics Data System (ADS)

Fornaro, Mauro; Lovera, Enrico

Underground exploitation of dimensional stones is not a novelty, being long since practised, as proved by a number of historical documents and by a certain number of ancient quarrying voids throughout the world. Anyway, so far, open cast quarrying has been the most adopted practice for the excavation of dimensional stones. One primary reason that led to this situation is of course connected to the lower production costs of an open cast exploitation compared to an underground one. This cheapness has been supported by geological and technical motives: on the one hand, the relative availability of surface deposits and, on the other, the development of technologies, which often can be used only outdoor. But, nowadays, general costs of quarrying activities should be re-evaluated because new, and often proper, restrictions have been strongly rising during recent years. As a consequence of both environmental and technical restrictions, pressure will more and more arise to reduce open cast quarrying and to promote underground exploitations. The trend is already well marked for weak rocks - for instance in the extractive basin of Carrara, where about one hundred quarries are active, 30 per cent is working underground, but also in Spain, Portugal and Greece the number of underground marble quarries is increasing - but not yet for hard rock quarrying, where only few quarries are working underground all around the world. One reason has to be found in cutting technologies traditionally used. In weak rocks, diamond wire saw and chain cutter are usable, with few adaptations, in underground spaces, while drilling and blasting, the traditional exploitation method for hard stone, is not easily usable in a confined space, where often only one free face is available. Many technicians and researchers agree that two technologies will probably open the door to underground quarrying in hard rocks: diamond wire and water jet. The first one is already available; the second should still be improved. The paper refers to some of the most important and significant examples in Italy, and underlines the possibility of extending, by underground quarrying, the exploitation of important and well-appreciated natural stones, as the quartzite-sandstone of the Tosco-Emiliano Appennini (Firenzuola Stone) and the Alpine gneisses. In order to pass from the simple experimental stage (explorative drift) to the more complex 3D design of the underground voids, detailed geo-structural reconstruction of the rock body and specific lithological in situ surveys are needed: such important aspects represent a very interesting common field between mining engineers and geologists.

Seismic scattering attribute for sedimentary classification of nearshore marine quarries for a major beach nourishment project: Case study of Adriatic coastline, Regione Abruzzo (Italy)

NASA Astrophysics Data System (ADS)

Orlando, Luciana; Contini, Paolo; De Girolamo, Paolo

2017-06-01

Of fundamental importance for any major beach nourishment project using marine quarries is a correct sedimentary classification. The main purpose of such a classification is to identify sand with the appropriate features for beach nourishment. This task is more onerous when quarry sediments are heterogeneous and mixed with silt. This is typical of nearshore marine quarries. The presence of excess silt compromises the use of marine quarries because of the water turbidity that may be induced in the nourished beaches, especially when the beaches are protected by defense structures. Here we discuss the use of scattering amplitude of seismic data, acquired with a pinger source (2-10 kHz), to detect and classify the unconsolidated sediment of a marine quarry. A robust correlation was found between this seismic attribute and the silt content in the sediment. The scattering amplitude was numerically calculated from the seismic data and used to map slices of silt content at different depths. The results have been validated with sedimentary analysis of vibra- and rotary cores, and by the dredged material used for the beach nourishment. The marine quarry produced about 1.200.000 m3 of sand used to nourish eight different beach sites along the Adriatic coasts of the Regione Abruzzo (Italy). The large-scale sedimentary assessment of the area was based on seismic boomer data and the evaluation of the volume of dredged sediments on multibeam data surveyed before and after the exploitation of the quarry. The study shows that this approach is effective in sites with high lateral and vertical variations in the percentage of sand in the sediments.

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The Weldon Spring Quarry is one of two noncontiguous areas that constitute the US Department of Energy`s (DOE) Weldon Spring site. The main area of the site is the chemical plant. Both areas are located in St. Charles County, Missouri, about 48 km (30 mi) west of St. Louis. The US Environmental Protection Agency (EPA) listed the quarry on the National Priorities List (NPL) in 1987, and the chemical plant area was added to the list in 1989. The quarry is about 6.4 km (4 mi) south-southwest of the chemical plant area; it is accessible from State Route 94 andmore » is currently fenced and closed to the public. The quarry is approximately 300 m (1,000 ft) long by 140 m (450 ft) wide and covers an area of approximately 3.6 ha (9 acres). The quarry was used by the Army for disposal of chemically contaminated (explosive) materials in the 1940s and was later used for the disposal of radioactively contaminated material by the Atomic Energy Commission (AEC) in the 1960s. Approximately 110,000 m{sup 3} (144,000 yd{sup 3}) of soil and waste material was removed from the quarry and transported to the chemical plant area as part of completing the remedial action stipulated in the Record of Decision (ROD) for the Quarry Bulk Waste Operable Unit (DOE 1990). Bulk waste removal was completed in October 1995. These wastes have been placed in the disposal cell at the chemical plant. Prior to bulk waste removal, contaminated water contained in the quarry pond was also removed; approximately 170 million liters (44 million gal) have been treated as of March 1998.« less

[Investigation of noise hazards and hearing status of workers in outdoor quarries].

PubMed

Zhang, Guoying; Tang, Zhifeng; Yao, Yongping; Wang, Haiying

2014-08-01

To investigate the noise hazards in open quarries and to provide a basis for further control of noise hazards. An investigation was performed during 2010 to 2011 among all open quarries in Deqing County of Zhejiang Province, China. The investigation included basic information of the quarries, the occupational health situation and noise intensity at the workplace, and the hearing loss of workers exposed to noise in quarry enterprises. The hearing test results were evaluated based on the Diagnostic criteria of occupational noise-induced hearing loss (GBZ 49-2007). A total of 25 enterprises with open quarries were investigated, of which only 30.4% (17/56) workplaces met the national standard. The median noise level was 92.5 dB (A). Fifty-four (10.6%) out of 508 workers in the 25 enterprises were diagnosed with binaural hearing loss in the initial physical examination, with 18.3% (93/508) under surveillance. The rate of normal hearing among crushing workers, mechanists, drilling workers, and blasting workers ranged between 27.6% and 41.4%, which was significantly lower than that among workers exposed to slight noise hazards (80.0%) or other workers (63.7%) (P < 0.05). With increasing working years, the binaural hearing loss of crushing workers became serious. Serious occupational noise hazards existed in most jobs in open quarries, with crushing workers, mechanists, drilling workers, and blasting workers most seriously jeopardized. Among crushing workers, those working in the first-line or unprotected second?line positions suffered more than the others. Further measures should be taken by the supervision department and the enterprises to control the noise hazards in open quarries.

A methodological framework to assess the socio-economic impact of underground quarries: A case study from Belgian Limburg.

PubMed

Sergeant, A; Poesen, J; Duchateau, P; Vranken, L

2016-01-15

This study developed a methodology to assess the socio-economic impact of the presence and collapse of underground limestone quarries. For this we rely on case study evidence from Riemst, a village located in Eastern Belgium and use both secondary and primary data sources. A sinkhole inventory as well as data about the prevention costs provided by the municipality was used. To estimate the recreational values of the quarries, visitor data was obtained from the tourist office of Riemst. Next, two surveys were conducted among inhabitants and four real estate agents and one notary. The direct and indirect damages were assessed using respectively the repair cost and production and real estate value losses. The total yearly direct and indirect damage equals €415000 (±€85000) and more than half of it can be attributed to the depreciation of real estate (€230000). The quarries have recreational, cultural-historical and ecological values and thus generate societal benefits. The yearly recreational value was at least €613000 in 2012 values. The ecological and cultural-historical values augment to €180000 per year (in 2012 values). Further, our study indicates that the gains from filling up the quarries below the houses located above an underground limestone quarry outweigh the costs in the case study area. The net gain from filling up the underground quarry ranges €38700 to €101700 per house. This is only the lower bound of the net gain from filling up these underground quarries since preventive filling makes future collapses less likely so that future direct repair costs will be most likely smaller. Copyright © 2015 Elsevier B.V. All rights reserved.

Respiratory symptoms and ventilatory functions among quarry workers in Edo state, Nigeria

PubMed Central

Isara, Alphonsus Rukevwe; Adam, Vincent Yakubu; Aigbokhaode, Adesuwa Queen; Alenoghena, Innocent Osi

2016-01-01

Introduction Workers in the quarry industries are exposed to hazards resulting from the inhalation of air borne particulates. The study determined the prevalence of respiratory symptoms and assessed ventilatory functions among quarry workers in Edo state, Nigeria. Methods Quarry workers (site workers and office workers) were interviewed using structured questionnaire. FEV1, FVC, FEV1/FVC and PEFR were measured using a KoKo Legend spirometer. Results A total of 113 quarry workers (76 exposure and 37 controls) were studied. The exposure group had significantly higher occurrence of chest tightness (35.5%) compared with 16.2% of the controls (p < 0.05). The occurrence of cough (23.7% versus 13.5%), sputum (21.1% versus 16.2%), and dyspnoea (7.9% versus 5.4%), were higher in exposure groups while wheeze (10.8% versus 10.5%) and nasal congestion (27.0% and 25.0%) were higher in the control groups. The mean (SD) FEV1, and FVC were significantly lower among the exposure compared with the control group; 2.77L (0.73) versus 3.14L (0.78), p < 0.05, and 3.48L (0.84) versus 3.89L (0.92), p < 0.05. In both groups, smokers had significantly lower mean (SD) FEV1, FVC and PEFR compared with non-smokers; 2.91L (0.77) versus 3.39L (0.69), p = 0.01, 3.61L (0.91) versus 4.26L (0.74), p < 0.05 and 6.56L (2.43) versus 7.98L (1.67), p < 0.05. Conclusion Chronic exposure to quarry dust is associated with respiratory symptoms and reduced lung function indices among quarry workers. The enforcement of the use of PPEs and periodic evaluation the lung function status of quarry workers is advocated. PMID:27347301

Respiratory symptoms and ventilatory functions among quarry workers in Edo state, Nigeria.

PubMed

Isara, Alphonsus Rukevwe; Adam, Vincent Yakubu; Aigbokhaode, Adesuwa Queen; Alenoghena, Innocent Osi

2016-01-01

Workers in the quarry industries are exposed to hazards resulting from the inhalation of air borne particulates. The study determined the prevalence of respiratory symptoms and assessed ventilatory functions among quarry workers in Edo state, Nigeria. Quarry workers (site workers and office workers) were interviewed using structured questionnaire. FEV1, FVC, FEV1/FVC and PEFR were measured using a KoKo Legend spirometer. A total of 113 quarry workers (76 exposure and 37 controls) were studied. The exposure group had significantly higher occurrence of chest tightness (35.5%) compared with 16.2% of the controls (p < 0.05). The occurrence of cough (23.7% versus 13.5%), sputum (21.1% versus 16.2%), and dyspnoea (7.9% versus 5.4%), were higher in exposure groups while wheeze (10.8% versus 10.5%) and nasal congestion (27.0% and 25.0%) were higher in the control groups. The mean (SD) FEV1, and FVC were significantly lower among the exposure compared with the control group; 2.77L (0.73) versus 3.14L (0.78), p < 0.05, and 3.48L (0.84) versus 3.89L (0.92), p < 0.05. In both groups, smokers had significantly lower mean (SD) FEV1, FVC and PEFR compared with non-smokers; 2.91L (0.77) versus 3.39L (0.69), p = 0.01, 3.61L (0.91) versus 4.26L (0.74), p < 0.05 and 6.56L (2.43) versus 7.98L (1.67), p < 0.05. Chronic exposure to quarry dust is associated with respiratory symptoms and reduced lung function indices among quarry workers. The enforcement of the use of PPEs and periodic evaluation the lung function status of quarry workers is advocated.

Comparison of physical and mechanical properties of river sand concrete with quarry dust concrete

NASA Astrophysics Data System (ADS)

Opara, Hyginus E.; Eziefula, Uchechi G.; Eziefula, Bennett I.

2018-03-01

This study compared the physical and mechanical properties of river sand concrete with quarry dust concrete. The constituent materials were batched by weight. The water-cement ratio and mix ratio selected for the experimental investigation were 0.55 and 1:2:4, respectively. The specimens were cured for 7, 14, 21 and 28 days. Slump, density and compressive strength tests were carried out. The results showed that river sand concrete had greater density and compressive strength than quarry dust concrete for all curing ages. At 28 days of curing, river sand concrete exceeded the target compressive strength by 36%, whereas quarry dust concrete was less than the target compressive strength by 12%. Both river sand concrete and quarry dust concrete for the selected water/cement ratio and mix ratio are suitable for non-structural applications and lightly-loaded members where high strength is not a prerequisite.

Candoglia Marble and the "Veneranda Fabbrica del Duomo di Milano": a resource for Global Heritage Stone Designation in the Italian Alps

NASA Astrophysics Data System (ADS)

Borghi, Alessandro; Castelli, Daniele; Corbetta, Elio; Antonella Dino, Giovanna

2015-04-01

Alpine marbles have been widely used in the past for celebrated, both indoor and outdoor, applications. Among them, the Candoglia Marble, a worldwide known and appreciated georesource, and its "bastard brother" from the nearby Ornavasso area were and are exploited in the Verbano-Cusio-Ossola quarry basin of Northwestern Italian Alps. They crop out as lenses (up to 30 m in thickness) interlayered within high-grade paragneisses of the Ivrea Zone, a section of deep continental crust that experienced amphibolite- to granulite-facies metamorphism of Palaeozoic age. The Candoglia and Ornavasso Marbles are pinkish to greyish, coarse-grained (> 3 mm), calcitic marbles with frequent, cm-thick, dark-greenish silicate layers containing diopside and tremolite; minor minerals include quartz, epidote, sulphides, Ba-feldspar, barite and, occasionally, phlogopite. First record of quarrying activities in the area arises to the Roman age (Ornavasso quarrying area). Both the Ornavasso and Candoglia Marbles were widely employed in local construction (San Nicola Church and Torre della Guardia at Ornavasso, Madonna di Campagna Church at Verbania, San Giovanni in Montorfano Church), but they became famous thanks to their application for the "Duomo di Milano" since the fourteenth century. At the beginning, the building stones employed for the construction of the Gothic style, Duomo di Milano were quarried in the Ornavasso area, but in a short time, the Candoglia quarry (property of the so-called "Veneranda Fabbrica del Duomo" that incessantly takes care of the Cathedral Church from 1387 A.D.) became the main quarry for the construction and maintenance of the Cathedral. The Candoglia quarry developed during the centuries, from open pit small quarries to a unique underground quarry, characterised by a very peculiar quarrying activities (subvertical bench characterized by strong lateral forces, which have to be contrasted and monitored). The Candoglia Marble was preferred to Carrara marbles also because of the more direct transport way from quarries to the construction yard: the transport were acted on big barges, from River Toce, across the Maggiore Lake and its emissary, the Ticino River, and then along the Naviglio Grande, up to the Milano Cathedral yard. The first saws driven by water wheels started to be employed in Candoglia to product slabs from stone blocks. Nowadays the working activities are both at Candoglia (block squaring activities and mason stone cutter laboratory) and in Milano (working plant). The peculiarity of the Candoglia Marble present exploitation is that all the quarried materials are used: as blocks (to produce the parts and sculptures for the Milano Cathedral maintenance), as armour stones (the irregular or not aesthetically suitable blocks) and as ornaments, furnishing, and jewels (the small pieces), so that everyone can potentially wear a "piece of history". The Candoglia Marble, for its petrological characteristics, its history, including the evolution of quarrying techniques and working activities, and its use in the construction and maintenance of the Milano Cathedral, represents an "unicum" that would deserve designation as Global Heritage Stone Resource.

Environmental Improvement Of Opencast Mining

NASA Astrophysics Data System (ADS)

Prokopenko, S.; Sushko, A.; Filatov, Yu; Kislyakov, M.; Kislyakov, I.

2017-01-01

Existing classifications of waste dumps in the quarries are given and their phenomenological nature is clarified. The need to identify the essence of the term "dump" is shown as well as the idea of "dump" as an artificial formation with everted and mixed rocks distanced from the quarry. Essential classification of man-made rock formations in quarries is developed. Characteristic of variations of man-made waste formations in quarries is developed. To reduce harmful effects of open-pit mining, dumps should be substituted with strat-lays - man-made structures relevant to natural stratification of litho-substances. Construction of strat-lays would improve ecological and technological culture of open cast mining.

Using a noise monitoring station in a small quarry located in an urban area.

PubMed

Wichers, Michiel; Iramina, Wilson Siguemasa; de Eston, Sérgio Médici; Ayres da Silva, Anna Luiza Marques

2017-12-22

Mining plays an important role in Brazilian exports. On the other hand, large urban centers like São Paulo, with approximately 21 million inhabitants, also demand an increasing domestic consumption of natural resources, such as construction aggregate. There are many quarries located in the surroundings of urban centers in Brazil, competing with the growth of urbanized areas. Such proximity leads to a series of conflicts involving quarries and surrounding communities, where the increase in noise levels is highlighted. Operations in quarries, in general, are intermittent. Noisier equipment, such as drilling rigs and primary crushers, operates only a few hours during the day, while other operations, such as screening and secondary and tertiary crushing, are more constant. This paper presents a study carried out in a quarry located near São Paulo, where in addition to conventional short term noise measurements at surrounding receptors, one noise monitoring station was installed, allowing to identify the noisiest moments during the quarry operating time. Through data transmitted by wireless technology, it was possible to follow the noise variations emitted from mining activities in real time and observe the noisiest events that were recorded for events that exceeded the established standards. A mobile application associated to this monitoring station facilitated the quarry's manager and employees to access immediately the monitoring information. Therefore, by using this system, it was possible to evaluate the effectiveness of noise reduction measures already taken and indicate what steps still need to be held.

Microbial Community Composition and Putative Biogeochemical Functions in the Sediment and Water of Tropical Granite Quarry Lakes.

PubMed

Kumar, Amit; Ng, Daphne H P; Wu, Yichao; Cao, Bin

2018-05-28

Re-naturalized quarry lakes are important ecosystems, which support complex communities of flora and fauna. Microorganisms associated with sediment and water form the lowest trophic level in these ecosystems and drive biogeochemical cycles. A direct comparison of microbial taxa in water and sediment microbial communities is lacking, which limits our understanding of the dominant functions that are carried out by the water and sediment microbial communities in quarry lakes. In this study, using the 16S rDNA amplicon sequencing approach, we compared microbial communities in the water and sediment in two re-naturalized quarry lakes in Singapore and elucidated putative functions of the sediment and water microbial communities in driving major biogeochemical processes. The richness and diversity of microbial communities in sediments of the quarry lakes were higher than those in the water. The composition of the microbial communities in the sediments from the two quarries was highly similar to one another, while those in the water differed greatly. Although the microbial communities of the sediment and water samples shared some common members, a large number of microbial taxa (at the phylum and genus levels) were prevalent either in sediment or water alone. Our results provide valuable insights into the prevalent biogeochemical processes carried out by water and sediment microbial communities in tropical granite quarry lakes, highlighting distinct microbial processes in water and sediment that contribute to the natural purification of the resident water.

Ecological filtering and plant traits variation across quarry geomorphological surfaces: implication for restoration.

PubMed

Gilardelli, Federica; Sgorbati, Sergio; Armiraglio, Stefano; Citterio, Sandra; Gentili, Rodolfo

2015-05-01

Revegetation patterns after quarry abandonment have been widely studied from several ecological points of view, but a trait-based approach is still lacking. The aim of this study was to characterise the plant species assemblages and the associated functional traits filtered on different geomorphological surfaces in abandoned limestone quarry areas: artificial cliffs, embankments, and platforms. We then verified if species with certain traits were better able to overcome the dispersal and environmental filters necessary for establishment. To this aim, we analyzed 113 vegetation plots and collected data on 25 morphological, ecological, and dispersal traits to detect species adaptaions across these man-made environments. As a case study, we investigated the extraction basin of Botticino (Lombardy, Italy), the second largest in Italy. The results obtained by SIMPER and CCA analyses showed that rockiness, stoniness, slope, elevation, and time of surfaces are the main filters that varied across quarries and affected plant assemblages at the macro-scale level. Across the three geomorphological surfaces (meso-scale) of quarries, more specific abiotic filters selecting species were found. In turn, traits differentiation according to the three main geomorphological surfaces of quarry emphasized that further filters acting at the micro-scale imply differences in dispersal mechanisms and resource availability. This work highlighted the utility to study species assemblages and environmental filters to address quarry restoration according to the type of geomorphological surface. The investigation of some traits (chorological form, life forms, seed dispersal,s and plant height) can furnish some interesting indications for practice individuating further abiotic filters acting at the micro-scale.

Identification of Quarries Rehabilitation Scenarios: A Case Study Within the Metropolitan Area of Bari (Italy)

NASA Astrophysics Data System (ADS)

Dal Sasso, Pasquale; Ottolino, Maria Antonella; Caliandro, Lucia Patrizia

2012-06-01

This paper addresses quarries rehabilitation issue within a Metropolitan Area. Areas where mining activity is carried out have been subjected to physical and environmental degradation linked both to pursue the building materials extraction and to the city expansion continuously asking for new areas to be developed with residential and service functions. These changes also occurred where environmental and landscape values are present. It has been therefore pointed out the issue of such areas redevelopment that, to be functionally reintegrated, must be consistently linked to the activities and the territorial local contexts characteristics. In this paper the quarries reuse issue is carried out through parameters identification able to define the quarries relationship with the neighboring towns and with their surroundings besides to identify their physical, environmental and landscaping characteristics. Quarry reuse alternatives have been identified among those consistent with the rehabilitation goals, as defined by the planning sector and internationally approved, while their selection is derived from the application of a two-step methodology: a multi-criteria analysis related to punctual parameters at a "site-specific" level, followed by a further territorial indicators checking over the wide area. This application has led to socially accepted results identifying the examined quarries for reuses ranging from agricultural-forestry and urban to functional or naturalistic. The proposed method has also proved to be suitable to address the abandoned quarries reuse problem with a systemic and consultative approach, as it is able to correlate the many variables present in the social and spatial complexity of the Metropolitan Areas.

INTERIOR VIEW, NORTH QUARRY, LOOKING WEST. IN THE FOREGROUND ON ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

INTERIOR VIEW, NORTH QUARRY, LOOKING WEST. IN THE FOREGROUND ON THE FIRST BENCH, POWDER HILLS ARE PRIMED FOR DOLOMITE EXTRACTION. ON THE SECOND BENCH, THE DRILL TEAM IS LAYING OUT THE NEXT SHOTS. ON THE TOP BENCH, A 245 CATERPILLAR LOADER FILLS A 55-TON CATERPILLAR ROCK TRUCK WITH EXTRACTED DOLOMITE FOR TRANSPORT TO THE DOLOMITE CRUSHING AND SCREENING PLANT. - Wade Sand & Gravel Company, North Quarry, State Highway 78, Thomas, Jefferson County, AL

Recycling of quarry waste as part of sustainable aggregate production: Norwegian and Italian point of view

NASA Astrophysics Data System (ADS)

Antonella Dino, Giovanna; Willy Danielsen, Svein; Chiappino, Claudia; Primavori, Piero; Engelsen, Christian John

2016-04-01

Resource preservation is one of the main challenges in Europe, together with waste management and recycling; recently several researchers are interested in the recovering of critical raw materials and secondary raw materials from landfill. Aggregate supply, even if it is not "critical" sensus stricto (s.s.), is one of the European priorities (low value but high volume needs). On the other side, the management of quarry waste , mainly from dimension stones, but also as fines from aggregate crushing, is still a matter of concern. Such materials are managed in different ways both locally and nationwide, and often they are landfilled, because of an unclear legislation and a general lack of data. Most of time the local authorities adopt the maximum precaution principle or the enterprises find it little profitable to recover them, so that the sustainable recycling of such material is not valued. Several studies have shown, depending on the material specific characteristics, the viability of recycling quarry waste into new raw materials used in glass and ceramic industries, precast concrete production, infrastructures etc. (Loudes et al. 2012, Dino&Marian 2015, Bozzola et al 2012, Dino et al. 2012, etc.). Thus, aggregate production may be one of the profitable ways to use quarry waste and is falling under the priority of EU (aggregate supply). Positive economic and environmental effects are likely to be achieved by systematic recycling of quarry waste planned by industries (industrial planning) and public authorities (national and local planning of aggregate exploitation). Today, the recycling level varies to a great extent and systematic recovery is not common among European Countries. In Italy and Norway no significant incentives on recycling or systematic approaches for local aggregate exploitation exist. The environmental consequences can be overexploitation of the natural resources, land take for the landfills, environmental contamination and landscape alteration by the quarry waste heaps. The environmentally sustainable management of quarry waste, which aims to recover and recycle both clean and contaminated materials, would therefore help to reduce the pressure on natural resources, reduce the land take and the environmental contamination. The present paper shows the main challenges connected to quarry waste management, focusing on several possibilities for quarry waste recovering, in order to produce recycled aggregates.

Groundwater maintenance at the vulcan materials quarry in Chattanooga, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, R.L.

1985-01-01

The Vulcan Materials Shallowford Road Quarry in Chattanooga, Tennessee is the largest active limestone quarry in the state. Currently it covers some 35 hectares with highwalls up to 100 m. Production is predominately from Middle Ordovician Limestone of the Stones River Group. The upper 60 m consists of medium-bedded gray limestone of the Pond Springs Formation, while the lower 40 m are in Lower Ordovician dolomites and limestones belonging to the Mascot Formation of the Knox Group. The present quarry began in 1951 and has been in continuous operation since that time. For several years the influx of groundwater intomore » the quarry was so great that over 11,355 liters per minute had to be removed by a series of pumps. A source of much of the groundwater was thought to be from Friar Branch which flowed near the present quarry site. At low water, several sinkholes were observed in the bottom of the stream. Several attempts were made (unsuccessfully) to fill these sinks. On July 17, 1984, a 184 m trench was dug along the north side of Friar Branch and fifty-one sections of 1.2 m diameter pipe were placed in the trench. Each 4 m section was made water tight and the water from Friar branch was then diverted into the pipe. Bulldozers scraped the dry bed of Friar Branch in an attempt to locate all major cavities and sinkholes. These were filled with grout and the bed of the creek was covered with about 7 to 8 cm of crushed rock and rolled. The entire stream was sealed with grout and then the stream was returned to its original course. The results was a marked reduction in groundwater seepage into the quarry.« less

Physical and mechanical properties of quarry dust waste incorporated into fired clay brick

NASA Astrophysics Data System (ADS)

Kadir, A. A.; Hassan, M. I. H.; Sarani, N. A.; Rahim, A. S. Abdul; Ismail, N.

2017-04-01

A large amount of quarry dust waste is dispose into landfills every year. This waste was obtained as a by-product during the production of aggregates through the crushing process of rocks in rubble crusher units. The increasing value of waste will have significant impact towards health and environment. Recycling such wastes by incorporating them into building materials is a practical solution for pollution problem. Therefore, this research was to examine the possibility of quarry dust to be incorporated in fired clay bricks. In this research, the composition and concentration of heavy metals were determined by using X-Ray Fluorescence Spectrometer (XRF). The research also consists of physical and mechanical properties of the fired clay bricks by utilizing quarry dust waste. Brick was manufactured by incorporating different percentages of quarry dust waste which are 0%, 10%, 20% and 30%. All bricks sample was tested with physical and mechanical properties which were density, shrinkage, initial rate of suction (IRS) and compressive strength of the fired bricks. Furthermore, the density and shrinkage were also in standard range. All physical and mechanical results were complied with the BS 3921:1985 standard. The comprehensive experimental work described in this research investigated the possibility of incorporating quarry dust into fired clay bricks. These materials could be an alternative low cost material for brick and at the same time provide a new disposal method for the waste.

Noise Exposure and Hearing Capabilities of Quarry Workers in Ghana: A Cross-Sectional Study

PubMed Central

Gyamfi, Charles Kwame R.; Amankwaa, Isaac; Owusu Sekyere, Frank; Boateng, Daniel

2016-01-01

Introduction. Although quarry operations have high economic significance, the effects they cause to the workers in terms of excessive noise production cannot be overlooked. This cross-sectional study assessed the extent of noise exposure and its influence on hearing capabilities among quarry workers in Ashanti region. Methods. The study involved 400 workers randomly selected from five quarries in Ashanti region from April to June 2012. Data was collected using structured questionnaires, physical examination, and audiological assessments. A logistic regression model was fitted to assess independent predictors of hearing loss. Results. All the machines used at the various quarries produced noise that exceeded the minimum threshold with levels ranging from 85.5 dBA to 102.7 dBA. 176 (44%) of study respondents had hearing threshold higher than 25 dBA. 18% and 2% of these were moderately (41–55 dBA) and severely (71–90 dBA) impaired, respectively. Age, duration of work, and use of earplugs independently predicted the development of hearing loss. Use of earplugs showed a protective effect on the development of hearing loss (OR = 0.45; 95% CI = 0.25, 0.84). Conclusion. This study provides empirical evidence on the extent of damage caused to quarry workers as a result of excessive noise exposure. This will support the institution of appropriate protective measures to minimize this threat. PMID:26904137

Archaeometric characterization and provenance determination of sculptures and architectural elements from Gerasa, Jordan

NASA Astrophysics Data System (ADS)

Al-Bashaireh, Khaled

2018-02-01

This study aims at the identification of the provenance of white marble sculptures and architectural elements uncovered from the archaeological site of Gerasa and neighboring areas, north Jordan. Most of the marbles are probably of the Roman or Byzantine periods. Optical microscopy, X-ray diffraction, and mass spectrometry were used to investigate petrographic, mineralogical and isotopic characteristics of the samples, respectively. Analytical results were compared with the main reference databases of known Mediterranean marble quarries exploited in antiquity. The collected data show that the most likely main sources of the sculptures were the Greek marble quarries of Paros-2 (Lakkoi), Penteli (Mount Pentelikon, Attica), and Thasos-3 (Thasos Island, Cape Vathy, Aliki); the Asia Minor marble quarries of Proconessus-1 (Marmara) and Aphrodisias (Aphrodisias); and the Italian quarry of Carrara (Apuan Alps). Similarly, the Asia Minor quarries of the fine-grained Docimium (Afyon) and the coarse-grained Proconessus-1 (Marmara) and Thasos-3 are the most likely sources of the architectural elements. The results agree with published data on the wide use of these marbles for sculpture and architectural elements.

Introducing a new aspect in marble quarry rehabilitation in Greece

NASA Astrophysics Data System (ADS)

Kaliampakos, D. C.; Mavrikos, A. A.

2006-06-01

For many years the marble extraction sector of the Greek mining industry has been in conflict with the public, especially in terms of rehabilitation of marble quarry sites. One of the main reasons for that is that the marble extraction sector has been unable to adjust to the existing legislative guidelines for the rehabilitation, such as extensive backfilling and re-vegetation. In the majority of cases these methods fail due to erosion of the backfill soil and adverse climatic conditions. As a result the number of abandoned marble quarry sites is continuously increasing. The present paper suggests a different approach regarding the rehabilitation of marble quarries. More specifically, the paper questions the applicability, the effectiveness, and the social usefulness of the above-mentioned guidelines and suggests the establishment of new land-uses, which are based on an in-depth analysis of the area’s special features, by taking full advantage of its potentials. What is more, the rehabilitation scheme proposes that the new land-uses and the quarrying activity may co-exist and operate simultaneously for a long period of time.

Radium-226 content of agricultural gypsums

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lindeken, C.L.; Coles, D.G.

1977-01-01

Gypsum (CaSO/sub 4/ . 2H/sub 2/O), used as a soil amendment for saline-alkali soils, is obtained either by quarrying or as a by-product in the phosphate fertilizer industry. The latter, termed phospho gypsum, contains variable amounts of /sup 226/Ra, depending on the uranium content of the phosphate rock. Radium-226 contents of both quarried and phospho gypsum were determined by gamma counting in a low-background Ge(Li) spectrometer equipped with Compton suppression. Quarried samples from Nova Scotia, Iowa, Texas, and California were compared with phospho gypsum derived from Florida land pebble phosphates. Quarried gypsums showed an average radium content of 0.21 pCi/g.more » The average radium in phospho gypsum was 14.6 pCi/g. Uranium-238 measurements showed that near secular equilibrium existed between the uranium and radium in the quarried samples. Disequilibrium in the phospho gypsums occurred because of the preferential separation of radium during chemical processing. At the levels observed, no health hazard is implied from uptake of radium by plants grown in phospho gypsum treated soil.« less

Contributions of non-destructive testing for determining the provenance of the granites used in the Roman Amphitheatre from Emerita Augusta, Badajoz, Spain.

NASA Astrophysics Data System (ADS)

Mota, M. Isabel; Alvarez de Buergo, Monica; Fort, Rafael; Pizzo, Antonio

2015-04-01

The Archaeological Ensemble of Emérita Augusta (Mérida, Badajoz, Spain) was listed a World Heritage Site in 1993 by UNESCO. One of the monuments that belongs to this Archaeological Ensemble is the Roman amphitheatre, mainly built with granite from quarries located near the city. Every urban centre in the Roman Empire, in addition to many rural sites, had one or more local quarries from which they extracted the bulk of their stone. In Mérida, there are a group of documented quarries located near the ancient city. In this work the authors have been investigating five of these documented outcrops which, due the distance from the monument or the existence of ancient Roman routes of communication with the city, can be the possible original quarries. The provenance of these materials with which the monument is built is of significant interest in terms of the restoration and conservation and from a historical point of view of the monument. Nowadays, there are many examples of identification of the original quarries that use destructive procedures and techniques which are based on the physical, petrographical, geochemical, magnetic or mechanical properties that are a function of the mineralogical and textural characteristics of the rock. In this work, the combined use of two non-destructive and on-site techniques, ultrasonic velocity and surface hardness determined with a Schmidt hammer rebound tester, allows to determine first, the quality and degree of decay in the granites, usually affecting the material surface and consisting of a decline in surface cohesion, and second, it can discriminate possible provenance areas of the rock used in the building. These two techniques are very useful for this purpose for several reasons. Their combined use allows the selection of the most representative blocks and ashlars for sampling. This reduces sampling to a minimum showing representative results for the whole building, especially in the case of performing ageing tests in the laboratory and when assessing consolidating and protecting treatments based on the similar decay condition present in the real structure; the combined values obtained from both techniques are directly and linearly related, can be used to compare the results from the building stones of the monument and from rocks from the surrounding documented quarries. The latter represents a suitable approach for locating the original quarries that supplied stone for construction and, in the case of many quarries having similar values, can be a method to exclude certain quarries. Moreover, the results also allow the identification of changes in determined physical properties of building stones, as porosity, mainly due to the exposure to climatic conditions, compared to fresh rocks from the quarries. The stones from the monument show lower ultrasonic and Schmidt hammer values than the rocks from the quarries. The obtained values from ultrasounds and from hardness surface measurement in the monument are affected by decay processes different from those in the quarries. This is due to the placement of ashlars in the monument (orientation), besides the cutting and carving of the stone and the surface finishing, which derives in a different correlation between the two sets of results from both techniques. Acknowledgements: to Geomateriales 2 programme (S2013/MIT-2914) funded by the Community of Madrid and to the Consorcio de la Ciudad Monumental de Mérida (Consortium of the Monumental City of Merida).

A preliminary sketch of the georesources in Niamey city (Niger)

NASA Astrophysics Data System (ADS)

Spadafora, Francesco; De Luca, Domenico A.; Antonella Dino, Giovanna; Lasagna, Manuela; Perotti, Luigi; Yadji, Guero; Tankari Dan-Badjo, Abdourahamane; Moussa, Issaka; Harouna, Moussa; Moussa, Konaté

2015-04-01

The present paper is about a preliminary study of the georesources (water and raw materials for construction) of Niamey city (Niger). Such research is part of an UNICOO project (funded by the University of Turin) and connected to the Edulink Cooperation Project (R.U.S.S.A.D.E.), a multidisciplinary project between Italy, Niger, Burquina Faso and Tchad funded on ACP- EU cooperation program in Higher Education. The main goals are the qualitative and quantitative characterization of the surface water and groundwater, and of aggregates (exploited in sands and gravel quarries). More specifically, at the beginning of the study there was a census of wells and quarries in the Niamey area, with a consequent sampling survey (surface water and groundwater sampling and aggregate sampling). After that, an in situ characterization was set: measure of piezometric levels in wells, water characterization (pH, electrolytic conductivity, temperature, nitrate and ammonia concentration) and an in situ evaluation of the quarrying techniques and quarry exploitation (present and old quarries). The samples were analyzed in Earth Science Dep. (UNITO) to evaluate the content of the main anions and cations (chemical analysis of sampled water) and the size distribution of the materials coming from the investigated quarries. Schematic reports of wells and quarries (location and features) were produced with the support of a Geodatabase with all available data. Geomatics instruments and methodologies (Geotagged Photos, Digital Mapping, GNSS Survey, Satellite Multitemporal Maps,) were basic starting point for the field data collection and a fundamental aid for data arrangement and final dissemination. The present study evidenced the actual condition of surface water and groundwater, also highlighting local phenomena of pollution. Nitrate in groundwater, i.e., showed locally concentration up to 5 times the WHO limit (50 mg/L). Thanks to the local quarry survey it was possible to evaluate how the open quarries works (open air yards, exploited by means of hand shovels and basic sieves) and what is the destination of the closed one (most of time the closed quarries are abandoned, not monitored and used as dumping areas, increasing the possibility of groundwater contamination). The safety condition of workers are very scarce: no protection devices, hard works and not safe yards (narrow tunnels, dug by hand and without protections). A sustainable management of natural resources and an appropriate environmental recovery are recommended, in order to prevent pollution and environmental deterioration. All the information arising from the present work are useful for local decision makers to enhance Niamey georesources management. At last, the information on water quality and quantity is fundamental in a wider perspective of food security and for life quality improvement. A final GIS project was prepared in order to have a good overview of the data and for dissemination purposes.

Multidisciplinary studies on ancient sandstone quarries of Western Sardinia (Italy).

NASA Astrophysics Data System (ADS)

Grillo, Silvana Maria; Del Vais, Carla; Naitza, Stefano

2013-04-01

The ancient coastal quarries of Mediterranean are increasingly considered geosites of multidisciplinary relevance. They are sites of historical-archaeological interest that show ancient techniques of stone extraction; they are significant for cultural heritage conservation and restoration, as sources of the stones used in ancient buildings and monuments; they are sites of geological relevance, as often retain important stratigraphic sections; they are also useful markers of secular changes in the sea level. A multisciplinary study is in progress on the ancient quarries of the Sinis region (western Sardinia island), integrating archaeological, geological, minero-petrographical data. In Sardinia, coastal quarries have been established from Punic and Roman times. Many of them exploited Quaternary sediments along the southern and western coasts of the island. They consist of middle-late Pleistocene marine conglomerates and carbonate sandstones, and of coastal (aeolian) carbonate sandstones. Sandstone blocks of different sizes have been widely used in ancient cities for buildings, defensive works, harbours, etc. Three main areas of stone extraction (San Giovanni di Sinis, Punta Maimoni, Is Arutas) have been so far recognized in the Sinis. GIS-supported mapping and documentation of the sites includes their geology and stratigraphy, the extension and layout of the quarries, and an evaluation of volumes of extracted rocks. Documented archaeological evidences include ancient extraction fronts, spoil heaps, working areas, working traces in the old fronts, transport routes of blocks, and traces of loading facilities. The study is aimed at reconstructing the relationships of the quarries with the urban areas of Sinis, as the ancient Punic-Roman city of Tharros. Consequently, a minero-petrographical characterization (optical microscopy, XRD) is performed on sandstones sampled in each quarry, and in historical buildings in Tharros and other centres of the region (Cabras, Oristano, Santa Giusta). They are prevailing fine-medium grained carbonate sandstones, and subordinate coarse sandstones and micro-conglomerates, variably cemented. In the studied areas, stratigraphic sequences grade from coarser facies of marine environment to fine-grained aeolian deposits, marked by cross-stratification. The Quaternary sedimentary sequence rests on Miocene limestones and clays, and on Plio-Pleistocene basalts. On optical microscopy, sandstones show grain-supported texture, with abundant carbonate bioclasts, intraclasts and algal nodules, with quartz, feldspars and fragments of granitoids, quartzites, volcanics. Grainsize in sandstone sequences progressively decreases towards the top, corresponding to an increase of fine bioclastic components. Terrigenous components change from the northernmost outcrops (Is Arutas quarries), where clasts of granitoid origin are dominant, to the southern outcrops (San Giovanni di Sinis quarries), which show a more marked compositional heterogeneity, with frequent volcanic feldspars and lithoclasts. The calcitic cement also shows distinct variations, both along the stratigraphic sequence and at areal scale, between the sparitic type and the micro/cryptocrystalline type. First evidences on samples from Tharros city walls indicate that sandstone blocks may come, almost in part, from the quarries of San Giovanni di Sinis that, consequently, could have started to work during the Punic age. Other evidences in the area, however, indicate that quarrying activities in Sinis continued well over the Ancient times, presumably including all the Middle Ages.

Deep Impact Spots Quarry

NASA Image and Video Library

2005-04-27

Taken on April 25, 2005, sixty-nine days before it gets up-close-and-personal with a comet, NASA Deep Impact spacecraft successfully photographed its quarry, comet Tempel 1, at a distance of 39.7 million miles.

Blasting methods for heterogeneous rocks in hillside open-pit mines with high and steep slopes

NASA Astrophysics Data System (ADS)

Chen, Y. J.; Chang, Z. G.; Chao, X. H.; Zhao, J. F.

2017-06-01

In the arid desert areas in Xinjiang, most limestone quarries are hillside open-pit mines (OPMs) where the limestone is hard, heterogeneous, and fractured, and can be easily broken into large blocks by blasting. This study tried to find effective technical methods for blasting heterogeneous rocks in such quarries based on an investigation into existing problems encountered in actual mining at Hongshun Limestone Quarry in Xinjiang. This study provided blasting schemes for hillside OPMs with different heights and slopes. These schemes involve the use of vertical deep holes, oblique shallow holes, and downslope hole-by-hole sublevel or simultaneous detonation techniques. In each bench, the detonations of holes in a detonation unit occur at intervals of 25-50 milliseconds. The research findings can offer technical guidance on how to blast heterogeneous rocks in hillside limestone quarries.

Volume Computation of a Stockpile - a Study Case Comparing GPS and Uav Measurements in AN Open Pit Quarry

NASA Astrophysics Data System (ADS)

Raeva, P. L.; Filipova, S. L.; Filipov, D. G.

2016-06-01

The following paper aims to test and evaluate the accuracy of UAV data for volumetric measurements to the conventional GNSS techniques. For this purpose, an appropriate open pit quarry has been chosen. Two sets of measurements were performed. Firstly, a stockpile was measured by GNSS technologies and later other terrestrial GNSS measurements for modelling the berms of the quarry were taken. Secondly, the area of the whole quarry including the stockpile site was mapped by a UAV flight. Having considered how dynamic our world is, new techniques and methods should be presented in numerous fields. For instance, the management of an open pit quarry requires gaining, processing and storing a large amount of information which is constantly changing with time. Fast and precise acquisition of measurements regarding the process taking place in a quarry is the key to an effective and stable maintenance. In other words, this means getting an objective evaluations of the processes, using up-to-date technologies and reliable accuracy of the results. Often legislations concerning mine engineering state that the volumetric calculations are to present ±3% accuracy of the whole amount. On one hand, extremely precise measurements could be performed by GNSS technologies, however, it could be really time consuming. On the other hand, UAV photogrammetry presents a fast, accurate method for mapping large areas and calculating stockpiles volumes. The study case was performed as a part of a master thesis.

Characterizing the microbial colonization of a dolostone quarry: implications for stone biodeterioration and response to biocide treatments.

PubMed

Cámara, Beatriz; De los Ríos, Asuncion; Urizal, Marta; de Buergo, Mónica Alvarez; Varas, Maria Jose; Fort, Rafael; Ascaso, Carmen

2011-08-01

This study examines the microbial colonization of three fronts of an abandoned dolostone quarry (Redueña, Madrid, Spain) exposed to atmospheric conditions for different time periods since Roman times to the present. Through scanning electron microscopy in backscattered electron mode (SEM-BSE), endolithic colonization was predominantly detected in the most recently exposed front, while in the longer exposed quarry fronts, epilithic forms of growth were most often observed. These observations were confirmed by denaturing gradient gel electrophoresis (DGGE) analysis. Based on the distribution pattern of microbial colonization in the different quarry fronts, we then established a sequence of colonization events that took place over this long time frame. Bioalteration processes related to this sequential colonization were also identified. Characterizing these sequential processes can be useful for interpreting biodeterioration processes in historic dolostone monuments, especially those affecting constructions in the area of the Redueña stone quarry. In a second experimental stage, different biocide treatments were tested on this quarry rock to find the best way to avoid the microbial colonization effects identified. Through combined SEM-BSE/DGGE analysis, the efficacy of several biocides against the microorganisms inhabiting the dolostones was assessed after 4 and 16 months treatment. In general, all treatments were effective at reducing around 80% of the lichen cover, although effects on endolithic lithobiontic communities were dependent on how well the rock surface had been mechanically cleaned prior to treatment and gradually disappeared over time.

The Solnhofen Limestone: A stony heritage of many uses

NASA Astrophysics Data System (ADS)

Kölbl-Ebert, Martina; Kramar, Sabina; Cooper, Barry J.

2016-04-01

High above the valley of the River Altmühl (Bavaria, Germany), between Solnhofen to the west and Kelheim to the east, numerous quarries give access to thinly plated limestone from the Upper Jurassic, some 150 million years before the present. The main quarry areas lie around the town of Eichstätt and between the villages of Solnhofen, Langenaltheim and Mörnsheim. Here limestone slabs have been quarried for several hundred years, some even in Roman times. Solnhofen Limestone is famous worldwide; not only because it is a beautiful building stone of high quality, but also because of the exceptionally well-preserved fossils it contains -among them the early bird Archaeopteryx. The quarry industry between Solnhofen and Eichstätt has shaped a cultural landscape, with old and new quarries sunk into the plain and numerous spoil heaps rising above it, for the rock is not all economically useful. But many of the spoil heaps and the old quarries are environmentally protected as they provide a habitat for some rare plants and animals. It is not necessary to cut the Solnhofen Limestone with a saw: it is split by hand into thin and even slabs or sheets which are used for flagstones and wall covers, which since centuries are sold world-wide. Locally it also serves as roof tiles for traditional houses. Thick slabs of especially fine quality may be found near Solnhofen and Mörnsheim and are used for lithography printing.

Quarry blasts assessment and their environmental impacts on the nearby oil pipelines, southeast of Helwan City, Egypt

NASA Astrophysics Data System (ADS)

Mohamed, Adel M. E.; Mohamed, Abuo El-Ela A.

2013-06-01

Ground vibrations induced by blasting in the cement quarries are one of the fundamental problems in the quarrying industry and may cause severe damage to the nearby utilities and pipelines. Therefore, a vibration control study plays an important role in the minimization of environmental effects of blasting in quarries. The current paper presents the influence of the quarry blasts at the National Cement Company (NCC) on the two oil pipelines of SUMED Company southeast of Helwan City, by measuring the ground vibrations in terms of Peak Particle Velocity (PPV). The seismic refraction for compressional waves deduced from the shallow seismic survey and the shear wave velocity obtained from the Multi channel Analysis of Surface Waves (MASW) technique are used to evaluate the closest site of the two pipelines to the quarry blasts. The results demonstrate that, the closest site of the two pipelines is of class B, according to the National Earthquake Hazard Reduction Program (NEHRP) classification and the safe distance to avoid any environmental effects is 650 m, following the deduced Peak Particle Velocity (PPV) and scaled distance (SD) relationship (PPV = 700.08 × SD-1.225) in mm/s and the Air over Pressure (air blast) formula (air blast = 170.23 × SD-0.071) in dB. In the light of prediction analysis, the maximum allowable charge weight per delay was found to be 591 kg with damage criterion of 12.5 mm/s at the closest site of the SUMED pipelines.

A procedure to evaluate environmental rehabilitation in limestone quarries.

PubMed

Neri, Ana Claudia; Sánchez, Luis Enrique

2010-11-01

A procedure to evaluate mine rehabilitation practices during the operational phase was developed and validated. It is based on a comparison of actually observed or documented practices with internationally recommended best practices (BP). A set of 150 BP statements was derived from international guides in order to establish the benchmark. The statements are arranged in six rehabilitation programs under three categories: (1) planning (2) operational and (3) management, corresponding to the adoption of the plan-do-check-act management systems model to mine rehabilitation. The procedure consists of (i) performing technical inspections guided by a series of field forms containing BP statements; (ii) classifying evidences in five categories; and (iii) calculating conformity indexes and levels. For testing and calibration purposes, the procedure was applied to nine limestone quarries and conformity indexes were calculated for the rehabilitation programs in each quarry. Most quarries featured poor planning practices, operational practices reached high conformity levels in 50% of the cases and management practices scored moderate conformity. Despite all quarries being ISO 14001 certified, their management systems pay low attention to issues pertaining to land rehabilitation and biodiversity. The best results were achieved by a quarry whose expansion was recently submitted to the environmental impact assessment process, suggesting that public scrutiny may play a positive role in enhancing rehabilitation practices. Conformity indexes and levels can be used to chart the evolution of rehabilitation practices at regular intervals, to establish corporate goals and for communication with stakeholders. Copyright 2010 Elsevier Ltd. All rights reserved.

Nature of the Paleocene/Eocene (P/E) boundary in Sinai, Egypt

NASA Astrophysics Data System (ADS)

Obaidalla, Nageh A.; Abdel-Maksoud, Nasr A.; Hosny, Atef M.; Mahfouz, Kamel H.

2017-12-01

The P/E boundary is studied at eight stratigraphic sections in Sinai, Egypt, which are nearly distributed in a stratigraphic profile from north to south as follows: Al-Hasanah, Sudr Al-Hitan, Wadi Sudr, Al-Thamad, Abu Qada, Wadi Matulla, Wadi Nukhul and Wadi Feiran. This study includes field, litho- and bio-stratigraphic analyses that enabled to delineate several hiatuses which may be due to the occurrence of tectonic activity that may be related to the echo of the Syrian Arc Orogeny at the P/E boundary. Generally, in Egypt the P/E boundary is marked by the occurrence of distinctive five beds, named by El Dababiya Quarry Member. At Wadi Nukhul, Wadi Matulla and Wadi Feiran sections, El Dababiya Quarry Member is well represented and the P/E boundary is conformable and resembles the GSSP section. Although El Dababiya Quarry Member is represented at Al-Hasanah section, the P/E boundary is marked by the occurrence of a minor hiatus at the end of Paleocene. Moreover, at Al Thamad section, El Dababiya Quarry Member is partially represented. On the other hand, at Sudr Al-Hitan, Wadi Sudr and Abu Qada sections, El Dababiya Quarry Member is completely absent due to a major hiatus.

Application of deterministic deconvolution of ground-penetrating radar data in a study of carbonate strata

USGS Publications Warehouse

Xia, J.; Franseen, E.K.; Miller, R.D.; Weis, T.V.

2004-01-01

We successfully applied deterministic deconvolution to real ground-penetrating radar (GPR) data by using the source wavelet that was generated in and transmitted through air as the operator. The GPR data were collected with 400-MHz antennas on a bench adjacent to a cleanly exposed quarry face. The quarry site is characterized by horizontally bedded carbonate strata with shale partings. In order to provide groundtruth for this deconvolution approach, 23 conductive rods were drilled into the quarry face at key locations. The steel rods provided critical information for: (1) correlation between reflections on GPR data and geologic features exposed in the quarry face, (2) GPR resolution limits, (3) accuracy of velocities calculated from common midpoint data and (4) identifying any multiples. Comparing the results of deconvolved data with non-deconvolved data demonstrates the effectiveness of deterministic deconvolution in low dielectric-loss media for increased accuracy of velocity models (improved at least 10-15% in our study after deterministic deconvolution), increased vertical and horizontal resolution of specific geologic features and more accurate representation of geologic features as confirmed from detailed study of the adjacent quarry wall. ?? 2004 Elsevier B.V. All rights reserved.

7. WEST DAM STRUCTURE, LOOKING NORTHWEST. QUARRIES AT BOTTOM; OUTLET ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. WEST DAM STRUCTURE, LOOKING NORTHWEST. QUARRIES AT BOTTOM; OUTLET STRUCTURE UNDER CONSTRUCTION CUTTING INTO HILL AT TOP OF PICTURE. - Eastside Reservoir, Diamond & Domenigoni Valleys, southwest of Hemet, Hemet, Riverside County, CA

Interior of Mess Hall, showing original columns and quarry tile ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Interior of Mess Hall, showing original columns and quarry tile floor - U.S. Naval Base, Pearl Harbor, Barracks & Mess Hall, Hornet Avenue between Liscome Bay & Enterprise Streets, Pearl City, Honolulu County, HI

The development of enhanced ripple-fire identification methods using high frequency data from Pinedale

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carr, D.; Garbin, H.D.

1996-01-01

A technique called ripple fire used in quarry blasts produces modulations in the spectra of these events. The Deployable Seismic Verification System (DSVS) was installed at the Pinedale Seismic Research Facility in Wyoming, an area with a lot of mining activity. DSVS records at frequencies up to 50 Hz and these data provides us with a unique opportunity to determine how well we can discriminate quarry blasts and if there are operational benefits from using high frequency (>20 Hz) data. We have collected a database of 646 events consisting of known earthquakes, known quarry blasts and unknown signals. We havemore » started to calculate preliminary spectrograms if we get the time-independent banding from the quarry blasts, and at what frequencies the banning occurs. We also detail what we hope to accomplish in FY 1996.« less

Geochronological and Taxonomic Revisions of the Middle Eocene Whistler Squat Quarry (Devil’s Graveyard Formation, Texas) and Implications for the Early Uintan in Trans-Pecos Texas

PubMed Central

Campisano, Christopher J.; Kirk, E. Christopher; Townsend, K. E. Beth; Deino, Alan L.

2014-01-01

The Whistler Squat Quarry (TMM 41372) of the lower Devil’s Graveyard Formation in Trans-Pecos Texas is a middle Eocene fossil locality attributed to Uintan biochronological zone Ui1b. Specimens from the Whistler Squat Quarry were collected immediately above a volcanic tuff with prior K/Ar ages ranging from ∼47–50 Ma and below a tuff previously dated to ∼44 Ma. New 40Ar/39Ar analyses of both of the original tuff samples provide statistically indistinguishable ages of 44.88±0.04 Ma for the lower tuff and 45.04±0.10 Ma for the upper tuff. These dates are compatible with magnetically reversed sediments at the site attributable to C20r (43.505–45.942 Ma) and a stratigraphic position above a basalt dated to 46.80 Ma. Our reanalysis of mammalian specimens from the Whistler Squat Quarry and a stratigraphically equivalent locality significantly revises their faunal lists, confirms the early Uintan designation for the sites, and highlights several biogeographic and biochronological differences when compared to stratotypes in the Bridger and Uinta Formations. Previous suggestions of regional endemism in the early Uintan are supported by the recognition of six endemic taxa (26% of mammalian taxa) from the Whistler Squat Quarry alone, including three new taxa. The revised faunal list for the Whistler Squat Quarry also extends the biostratigraphic ranges of nine non-endemic mammalian taxa to Ui1b. PMID:24988115

Stone Quarrying, Crushing and Screening Facilities General Air Quality Permit Request for Coverage: US Silica - Parshall Transload Facility

EPA Pesticide Factsheets

Documents related to Request for Coverage under Stone Quarrying, Crushing, and Screening Facilities General Permit Indian Reservation, US Silica, Parshall Transload Facility, Fort Berthold Indian Reservation, North Dakota.

DETAIL OF TWO LARGE BORE HOLES ON TOP OF SOUTH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAIL OF TWO LARGE BORE HOLES ON TOP OF SOUTH QUARRY WALL, FACING NORTH - Granite Hill Plantation, Quarry No. 1, South side of State Route 16, 1.3 miles northeast east of Sparta, Sparta, Hancock County, GA

VIEW OF PARALLEL LINE OF LARGE BORE HOLES IN NORTHERN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF PARALLEL LINE OF LARGE BORE HOLES IN NORTHERN QUARRY AREA, FACING NORTHEAST - Granite Hill Plantation, Quarry No. 2, South side of State Route 16, 1.3 miles northeast east of Sparta, Sparta, Hancock County, GA

Stone Quarrying, Crushing and Screening Facilities General Air Quality Permit Request for Coverage: Unimin Corporation - Unimin Flat Storage

EPA Pesticide Factsheets

Documents related to Request for Coverage under Stone Quarrying, Crushing and Screening Facilities General Permit, for the Unimin Corporation Silica Sand Rail Transloading Facility on the Fort Berhold Indian Reservation, North Dakota.

Assessment of Rock Slope Stability in Limestone Quarries in the Tournai's Region (Belgium) Using Structural Data

NASA Astrophysics Data System (ADS)

Tshibangu, Jean-Pierre; Deloge, K. Pierre-Alexandre; Deschamps, Benoît; Coudyzer, Christophe

The Tournais region is characterised by famous outcrops of carboniferous limestone which is mined out for cement and raw material production. The four main quarries found in the Region, i.e. Gaurain-Ramecroix, Milieu, Antoing and Lemay; are owned by the three main cement producers in Belgium: Italcimenti, Holcim and CBR. The global production of limestone is about 20 millions tons per year, giving big pits with depths up to 150 m. With the growth of the pits, the quarries are approaching each other leading to the problem of managing the reserves contained in the separating walls and their mechanical stability. The limestone deposit is composed of different seams having varying thickness, chemical com- position and even mechanical properties. The deposit has an overall horizontal dip and is intersected by two main sets of discontinuities with a spacing of about 10 m or less. It is also crossed by a set of east to west faults but the quarries are implanted in the in between areas, so to not be crossed by these faults. The layers and specially the shallow ones are characterised by a typical karstic weathering giving open or filled cavities. This paper presents the global work quarried out in order to study the stability of the Lemays quarry. First a description of the orientation and spacing of discontinuities is presented, and an attempt made to correlate to the development of weathering. Mechanical laboratory tests have been performed and a qualification of the rock mass assessed. A coupled approach is then presented using a mining planning analysis and mechanical simulation (i.e. Finite Element method).

Revegetation in abandoned quarries with landfill stabilized waste and gravels: water dynamics and plant growth - a case study

NASA Astrophysics Data System (ADS)

Zhang, Cheng-liang; Feng, Jing-jing; Rong, Li-ming; Zhao, Ting-ning

2017-11-01

Large amounts of quarry wastes are produced during quarrying. Though quarry wastes are commonly used in pavement construction and concrete production, in situ utilization during ecological restoration of abandoned quarries has the advantage of simplicity. In this paper, rock fragments 2-3 cm in size were mixed with landfill stabilized waste (LSW) in different proportions (LSW : gravel, RL), which was called LGM. The water content, runoff and plant growth under natural precipitation were monitored for 2 years using a runoff plot experiment. LGM with a low fraction of LSW was compacted to different degrees to achieve an appropriate porosity; water dynamics and plant growth of compacted LGM were studied in a field experiment. The results showed the following: (1) LGM can be used during restoration in abandoned quarries as growing material for plants. (2) RL had a significant effect on the infiltration and water-holding capacity of LGM and thus influenced the retention of precipitation, water condition and plant growth. LGM with RL ranging from 8:1 to 3:7 was suitable for plant growth, and the target species grew best when RL was 5:5. (3) Compaction significantly enhanced water content of LGM with a low RL of 2:8, but leaf water content of plants was lower or unchanged in the more compacted plots. Moderate compaction was beneficial to the survival and growth of Robinia pseudoacacia L. Platycladus orientalis (L.) Franco and Medicago sativa L. were not significantly affected by compaction, and they grew better under a high degree of compaction, which was disadvantageous for the uppermost layer of vegetation.

On the way of Friuli "yellow villages": the use of a calcareous-dolomitic sandstone in the surroundings of the quarrying area through the centuries.

NASA Astrophysics Data System (ADS)

Frangipane, Anna

2017-04-01

The role of local stone building material in cultural and technological heritage is based on the definition of the area of use, as related to ancient transportation networks, allowing the movement of heavy blocks from the quarries to the building sites. It is the case of the result of several surveys carried out for the detection of the architectural elements, dating from Middle Age to 20th century, made of a yellowish calcareous-dolomitic sandstone, which have been found, hidden among renovated buildings and new construction, in Friuli region (NE Italy). on the way between the quarrying piedmont western area and the towns of Udine and Spilimbergo. Starting from the definition of the quarrying area, the contribution give notice of such architectural elements (frames, columns, …), both in vernacular architecture and in relevant buildings, putting in evidence the period of their realisation and their technological features.

Glacial Erosion Driven by Seasonal Shifts in Meltwater Drainage

NASA Astrophysics Data System (ADS)

Ugelvig, S. V.; Egholm, D. L.

2017-12-01

Subglacial erosion processes, like abrasion and quarrying, have been studied for decades. While models for abrasion clearly points to sliding speed as a primary control on abrasion rates, quarrying rates are thought to be governed by more complex combinations of sliding speed, effective pressure, bedrock slope and short-term water pressure fluctuations. Early models for quarrying focused on the deviatoric stress needed for growth of small isolated cracks in otherwise homogeneous intact bedrock. The rate-limiting factor for quarrying was thus the subcritical crack growth. Later studies have included effects of pre-existing fractures in the bedrock that weaken the rock. Here the strength distribution in the rock is based on the assumption that larger rock bodies have lower strength, because they have a higher probability of containing a weak fracture. However, this approach has been hampered by the assumption of steady-state cavity configuration. Here we attempt to combine previous model efforts in a model that tracks the temporal evolution of cavities while including a statistical treatment of bedrock strength. Using a two-dimensional finite-difference model, we simulate the spatial and temporal evolution of the hydrological system at the base of a glacier, while simultaneously computing rates of abrasion and quarrying. Cavity lengths and channel cross-sections evolve through time, which allow us to study how temporal shifts in ice-bed contact area and deviatoric stress influence quarrying rates over the course of a year. Furthermore, we use the temporal evolution of contact area between ice and bed to predict basal sliding speed and scale abrasion rates. Our results suggest that ice-bed contact area is a key variable in controlling sliding speed and rates of glacial erosion on seasonal time scales, where the subglacial drainage system reorganizes to accommodate the variations in surface melt rates. However, on diurnal timescales cavities and channels cannot adjust to the relatively rapid changes in meltwater input, which causes large fluctuations in water pressure. This in turn elevates the deviatoric stress in the bedrock and pressure fluctuations are thus on diurnal timescales found to dictate quarrying rates as well as abrasion rates.

Compilation and preliminary interpretation of hydrologic data for the Weldon Spring radioactive waste-disposal sites, St Charles County, Missouri; a progress report

USGS Publications Warehouse

Kleeschulte, M.J.; Emmett, L.F.

1986-01-01

The Weldon Spring Chemical Plant is located just north of the drainage divide separating the Mississippi River and the Missouri River in St. Charles County, Missouri. From 1957 to 1966 the plant converted uranium-ore concentrates and recycled scrap to pure uranium trioxide, uranium tetrafluoride, and uranium metal. Residues from these operations were pumped to four large pits that had been excavated near the plant. Small springs and losing streams are present in the area. Water overlying the residue in the pits has a large concentration of dissolved solids and a different chemical composition compared to the native groundwater and surface water. This difference is indicated by the concentrations of calcium, sodium, sulfate, nitrate, fluoride, uranium, radium, lithium, molybdenum, strontium, and vanadium, all of which are greater than natural or background concentrations. Water from Burgermeister Spring, located about 1.5 miles north of the chemical plant area, contains uranium and nitrate concentrations greater than background concentrations. Groundwater in the shallow bedrock aquifer moves northward from the vicinity of the chemical plant toward Dardenne Creek. An abandoned limestone quarry several miles southwest of the chemical plant also has been used for the disposal of radioactive waste and rubble. Groundwater flow from the quarry area is southward through the alluvium, away from the quarry and toward the Missouri River. The St. Charles County well field is located in the Missouri River flood plain near the quarry and the large yield wells are open to the Missouri River alluvial aquifer. Water from a well 4,000 ft southeast of the quarry was analyzed; there was no indication of contamination from the quarry. Additional water quality and water level data are needed to determine if water from the quarry moves toward the well field. Observation wells need to be installed in the area between the chemical plant, pits, and Dardenne Creek. The wells would be used to provide access for measurements of depth to ground water and for the collection of water samples from the shallow bedrock aquifer. (Lantz-PTT)

Magnetic properties and element concentrations in lichens exposed to airborne pollutants released during cement production.

PubMed

Paoli, Luca; Winkler, Aldo; Guttová, Anna; Sagnotti, Leonardo; Grassi, Alice; Lackovičová, Anna; Senko, Dušan; Loppi, Stefano

2017-05-01

The content of selected elements (Al, As, Ca, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, S, Ti, V and Zn) was measured in samples of the lichen Evernia prunastri exposed for 30, 90 and 180 days around a cement mill, limestone and basalt quarries and urban and agricultural areas in SW Slovakia. Lichens transplanted around the investigated quarries and the cement mill rapidly (30 days) reflected the deposition of dust-associated elements, namely Ca (at the cement mill and the limestone quarry) and Fe, Ti and V (around the cement mill and the basalt quarry), and their content remained significantly higher throughout the whole period (30-180 days) with respect to the surrounding environment. Airborne pollutants (such as S) progressively increased in the study area from 30 to 180 days. The magnetic properties of lichen transplants exposed for 180 days have been characterized and compared with those of native lichens (Xanthoria parietina) and neighbouring bark, soil and rock samples, in order to test the suitability of native and transplanted samples as air pollution magnetic biomonitors. The magnetic mineralogy was homogeneous in all samples, with the exception of the samples from the basalt quarry. The transplants showed excellent correlations between the saturation remanent magnetization (Mrs) and the content of Fe. Native samples had a similar magnetic signature, but the values of the concentration-dependent magnetic parameters were up to two orders of magnitude higher, reflecting higher concentrations of magnetic particles. The concentrations of As, Ca and Cr in lichens correlated with Mrs values after neglecting the samples from the basalt quarry, which showed distinct magnetic properties, suggesting the cement mill as a likely source. Conversely, Ti and Mn were mostly (but not exclusively) associated with dust from the basalt quarry. It is suggested that the natural geological characteristics of the substrate may strongly affect the magnetic properties of lichen thalli. Taking this into account, the results of this study point out the suitability of lichens as air pollution magnetic biomonitors.

Quantification of Reduction in Forced Vital Capacity of Sand Stone Quarry Workers

PubMed Central

Singh, Suresh Kumar; Chowdhary, G. R.; Chhangani, V. D.; Purohit, Gopal

2007-01-01

This study assessed the reduction in forced vital capacity of lungs of sand stone quarry workers exposed to high respirable suspended particulate concentration. The sand stone quarry workers are engaged in different type of activities like drilling, loading and dressing. These different working places have different concentration of RSPM and these workers are exposed to different concentration of RSPM. It is found that exposure duration and exposure concentrations are main factors responsible to damage respiratory tract of worker. It is also revealed from the study that most of the workers are suffering from silicosis if the exposure duration is more than 15 years. PMID:18180540

A computational study of particulate emissions from an open pit quarry under neutral atmospheric conditions

NASA Astrophysics Data System (ADS)

Silvester, S. A.; Lowndes, I. S.; Hargreaves, D. M.

2009-12-01

The extraction of minerals from surface mines and quarries can produce significant fugitive dust emissions as a result of site activities such as blasting, road haulage, loading, crushing and stockpiling. If uncontrolled, these emissions can present serious environmental, health, safety and operational issues impacting both site personnel and the wider community. The dispersion of pollutant emissions within the atmosphere is principally determined by the background wind systems characterized by the atmospheric boundary layer (ABL). This paper presents an overview of the construction and solution of a computational fluid dynamics (CFD) model to replicate the development of the internal ventilation regime within a surface quarry excavation due to the presence of a neutral ABL above this excavation. This model was then used to study the dispersion and deposition of fugitive mineral dust particles generated during rock blasting operations. The paths of the mineral particles were modelled using Lagrangian particle tracking. Particles of four size fractions were released from five blast locations for eight different wind directions. The study concluded that dependent on the location of the bench blast within the quarry and the direction of the wind, a mass fraction of between 0.3 and 0.6 of the emitted mineral particles was retained within the quarry. The retention was largest when the distance from the blast location to the downwind pit boundary was greatest.

Quarry waste management and recovery: first results connected to Carrara marble ravaneti (Italy)

NASA Astrophysics Data System (ADS)

Antonella Dino, Giovanna; Chiappino, Claudia; Rossetti, Piergiorgio

2017-04-01

Quarry waste (QW) represents a huge economic and environmental issue, due to loss of resources and to economic and environmental costs connected to waste management and landfilling activities. In many cases, valuable Raw Materials (RM) and Secondary Raw Materials (SRM) can be supplied by enhancing the QW recovery. In Italy large amounts of QW have been and still are dumped: such materials, if their quality (chemical, mineralogical, physical characteristics) and quantity are adequate, and if the impacts connected to their management are positive, can represent a valuable resource for SRM exploitation. Several dimension stone quarries have been and are interested by researches as for QW exploitation. Some researches show positive results, which are the basis for QW recovery (both from waste streams and from quarry dumps exploitation): a noticeable example is represented by Carrara marble waste. The Carrara quarry basin is characterized by ca. one hundred quarries for colored and white marble exploitation. The waste production can be summarized in: 80 Mm3 waste present in old quarry dumps (Ravaneti) and 3 Mm3/y of waste stream from quarrying activities. At present only 0.5 Mm3/y of QW is exploited for SRM production, causing a huge loss of resource. This has been the background for a preliminary research, on Carrara marble Ravaneti characterization, which was carried out thanks to the close cooperation between University of Torino, Società Apuana Marmi srl, and SET srl. In 2015, two QW dumping areas, Calocara and Lorano, were selected as representative for sampling activities. Three main sample categories were individuated based on granulometry (0.5-4 mm, 0-25 mm, 0-150 mm) to be characterized (size distribution, density, Atterberg limits, Los Angeles test, freezing and heat tests, flat and shape indexes, geochemistry, mineralogy). The results obtained are promising: the physical characterization shows an attitude for Carrara QW to be recovered as crushed materials for embankments and armour stone. Furthermore, the mineralogical and geochemical analyses show that these materials, being composed of nearly pure CaCO3, could find a proper application in high value products, as filler for paper, rubber, paint, plastic, etc. These data need to be confirmed by other analyses, thus a systematic characterization of QW present in the different quarry dumps is going to be programmed. R&D is strategic to solve problems connected to QW and landscape management. The cooperation between private Companies, Research Centers and Local Authorities is fundamental to reach the target, in terms of experimentation of new products (for civil works and infrastructure, building industry, agronomy, high-tech, etc.). Furthermore, if the stone industry aims at guaranteeing the systematic and convenient SRM recovery from QW, a change in exploitation and working activities has to be planned (eg. selection of the potential SRMs; dedicated stock areas for selected SRM; proper treatments depending on the kinds of reuse; treatment-activity protocols to produce each new product, etc.).

Hydrogeological features conditioning trophic levels of quarry lakes in western Po plain (north-western Italy)

NASA Astrophysics Data System (ADS)

De Luca, Domenico Antonio; Castagna, Sara; Lasagna, Manuela

2013-04-01

Quarry lakes occur in plains areas due to the extraction of alluvial sand and gravel used for grout and concrete in the construction industry. Excavation depths can reach and intersect the groundwater surface, thus creating a lake. Because of the need to optimize efficiency, the number of active open pit mines has increased in recent years; consequently, the global number of pit lakes will increase in coming decades (Castendyk and Eary 2009; Klapper and Geller 2001; Castro and Moore 2000). Similar to natural lakes, pit lakes are subject to eutrophication process, both during and after quarrying activity; during mining activity, the eutrophic level is strongly controlled by the excavation method. In the Piedmont territory (north-western Italy) there are 70 active quarry lakes, corresponding to approximately 0.1% of the entire plain area. Quarry lakes, located primarily along the main rivers occur in alluvial deposits of the plain area and have average depths between 20 and 30 m (maximum of 60 m deep) and surface areas between 3 and 30 hectares (Castagna 2008). The present study describes the trophic status of 23 active quarry lakes in the Piedmont plain that were evaluated by applying classifications from scientific literature. Currently, the majority of the studied quarry lakes may be defined as mesotrophic or eutrophic according to the trophic state classifications. Based on historic data, lake trophic levels have increased over time, during active mining. At the end of mining activity, further deterioration of water quality was expected, especially for smaller lakes with minimal oxygen stratification and higher levels of nutrients and algal growth. In addition, the paper focuses on the pit lake water quality and pit dimension; From an environmental perspective the excavation of quarry lakes with an appreciable size will likely result in a better safeguard of water quality and enhanced possibilities for lake end use after the cessation of mining. Piedmont quarry lakes, for the most part, have rather large depths (over 20 m), and moreover, unlike natural lakes, this type of lake is not influenced by sewage inputs that are often a primary cause of eutrophication in natural lakes. It was shown that, in Piedmont, lakes with a larger depth and volume generally had a lower tendency towards eutrophication. References Castendyk D, Eary T (2009). The nature and global distribution of pit lakes. In, Mine Pit Lakes: Characteristics, Predictive Modeling, and Sustainability Castendyk, D.; Eary, T. and Park, B. (eds.) Society for Mining Engineering (SME), Colorado, USA, 1-11pp. Klapper H, Geller W (2001) Water quality management of mining lakes - a new field of applied hydrobiology. Acta Hydrochim Hydrobiol, 29: 363-374 Castro JM, Moore JN (2000) Pit lakes: their characteristics and the potential for their remediation. Environ Geol, 39(11):1254-1260 Castagna S (2008) Studio delle problematiche idrogeologiche nelle attività estrattive sottofalda per materiali granulari. Ph.D. Thesis.

Oscar Renda Contracting Inc. Navajo Nation Crushing/Screening Operation: Coverage Under General Air Quality Permit for Stone Quarrying, Crushing and Screening Facilities

EPA Pesticide Factsheets

Documents related to approved request for coverage under the Stone Quarrying, Crushing and Screening Facilities General Permit for Oscar Renda Contracting Inc. Navajo Nation Crushing/Screening Operation located in McKinley and San Juan Counties, NM.

Simulated water budgets and ground-water/surface-water interactions in Bushkill and parts of Monocacy Creek watersheds, Northampton County, Pennsylvania: A preliminary study with identification of data needs

USGS Publications Warehouse

Risser, Dennis W.

2006-01-01

This report, prepared in cooperation with the Department of Environmental Protection, Office of Mineral Resources Management, provides a preliminary analysis of water budgets and generalized ground-water/surface-water interactions for Bushkill and parts of Monocacy Creek watersheds in Northampton County, Pa., by use of a ground-water flow model. Bushkill Creek watershed was selected for study because it has areas of rapid growth, ground-water withdrawals from a quarry, and proposed stream-channel modifications, all of which have the potential for altering ground-water budgets and the interaction between ground water and streams. Preliminary 2-dimensional, steady-state simulations of ground-water flow by the use of MODFLOW are presented to show the status of work through September 2005 and help guide ongoing data collection in Bushkill Creek watershed. Simulations were conducted for (1) predevelopment conditions, (2) a water table lowered for quarry operations, and (3) anthropogenic changes in hydraulic conductivity of the streambed and aquifer. Preliminary results indicated under predevelopment conditions, the divide between the Bushkill and Monocacy Creek ground-water basins may not have been coincident with the topographic divide and as much as 14 percent of the ground-water discharge to Bushkill Creek may have originated from recharge in the Monocacy Creek watershed. For simulated predevelopment conditions, Schoeneck Creek and parts of Monocacy Creek were dry, but Bushkill Creek was gaining throughout all reaches. Simulated lowering of the deepest quarry sump to an altitude of 147 feet for quarry operations caused ground-water recharge and streamflow leakage to be diverted to the quarry throughout about 14 square miles and caused reaches of Bushkill and Little Bushkill Creeks to change from gaining to losing streams. Lowering the deepest quarry sump to an altitude of 100 feet caused simulated ground-water discharge to the quarry to increase about 4 cubic feet per second. Raising the deepest sump to an altitude of 200 feet caused the simulated discharge to the quarry to decrease about 14 cubic feet per second.Decreasing the hydraulic conductivity of the streambed of Bushkill Creek in the reach of large losses of flow caused simulated ground-water levels to decline and ground-water discharge to a quarry to decrease from 74 to 45 cubic feet per second.Decreasing the hydraulic conductivity of a hypothesized highly transmissive zone with a plug of relatively impermeable material caused ground-water levels to increase east of the plug and decline west of the plug, and decreased the discharge to a quarry from 74 to 53 cubic feet per second. Preliminary results of the study have significant limitations, which need to be recognized by the user. The results demonstrated the usefulness of ground-water modeling with available data sets, but as more data become available through field studies, a more complete evaluation could be conducted of the preliminary assumptions in the conceptual model, model sensitivity, and effects of boundary conditions. Additional streamflow and ground-water-level measurements would be needed to better quantify recharge and aquifer properties, particularly the anisotropy of carbonate rocks. Measurements of streamflow losses at average, steady-state hydrologic conditions could provide a more accurate estimate of ground-water recharge from this source, which directly affects water budgets and contributing areas simulated by the model.

7 CFR 330.300a - Administrative instructions exempting soil from parts of Canada from certain restrictions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 5 2014-01-01 2014-01-01 false Administrative instructions exempting soil from parts... FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Soil, Stone, And Quarry Products § 330.300a Administrative instructions exempting soil from parts...

7 CFR 330.302 - Domestic movements of earth (including soil), stone, etc.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Domestic movements of earth (including soil), stone...; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Soil, Stone, And Quarry Products § 330.302 Domestic movements of earth (including soil), stone, etc. The interstate movement from...

7 CFR 330.302 - Domestic movements of earth (including soil), stone, etc.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 5 2012-01-01 2012-01-01 false Domestic movements of earth (including soil), stone...; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Soil, Stone, And Quarry Products § 330.302 Domestic movements of earth (including soil), stone, etc. The interstate movement from...

7 CFR 330.302 - Domestic movements of earth (including soil), stone, etc.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 5 2011-01-01 2011-01-01 false Domestic movements of earth (including soil), stone...; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Soil, Stone, And Quarry Products § 330.302 Domestic movements of earth (including soil), stone, etc. The interstate movement from...

7 CFR 330.300a - Administrative instructions exempting soil from parts of Canada from certain restrictions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Administrative instructions exempting soil from parts... FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Soil, Stone, And Quarry Products § 330.300a Administrative instructions exempting soil from parts...

7 CFR 330.300a - Administrative instructions exempting soil from parts of Canada from certain restrictions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 5 2013-01-01 2013-01-01 false Administrative instructions exempting soil from parts... FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Soil, Stone, And Quarry Products § 330.300a Administrative instructions exempting soil from parts...

7 CFR 330.302 - Domestic movements of earth (including soil), stone, etc.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 5 2014-01-01 2014-01-01 false Domestic movements of earth (including soil), stone...; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Soil, Stone, And Quarry Products § 330.302 Domestic movements of earth (including soil), stone, etc. The interstate movement from...

7 CFR 330.302 - Domestic movements of earth (including soil), stone, etc.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 5 2013-01-01 2013-01-01 false Domestic movements of earth (including soil), stone...; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Soil, Stone, And Quarry Products § 330.302 Domestic movements of earth (including soil), stone, etc. The interstate movement from...

7 CFR 330.300a - Administrative instructions exempting soil from parts of Canada from certain restrictions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 5 2011-01-01 2011-01-01 false Administrative instructions exempting soil from parts... FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Soil, Stone, And Quarry Products § 330.300a Administrative instructions exempting soil from parts...

7 CFR 330.300a - Administrative instructions exempting soil from parts of Canada from certain restrictions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 5 2012-01-01 2012-01-01 false Administrative instructions exempting soil from parts... FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Soil, Stone, And Quarry Products § 330.300a Administrative instructions exempting soil from parts...

77 FR 10472 - San Bernardino National Forest, Mountaintop Ranger District, California, Mitsubishi South Quarry...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-22

... Cushenbury Cement Plant. Concurrent reclamation would be conducted throughout the life of the quarry and, at... the lead state agency under the California Environmental Quality Act (CEQA), address specific... grades of limestone to meet the feed requirement for the cement plant would not be adequate for the life...

40 CFR 372.23 - SIC and NAICS codes to which this Part applies.

Code of Federal Regulations, 2010 CFR

2010-07-01

... facilities primarily engaged in reproducing text, drawings, plans, maps, or other copy, by blueprinting...)); 212324Kaolin and Ball Clay Mining Limited to facilities operating without a mine or quarry and that are...)); 212393Other Chemical and Fertilizer Mineral Mining Limited to facilities operating without a mine or quarry...

Photographic copy of photograph, ca. 1921 (original print located in ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of photograph, ca. 1921 (original print located in the National Archives & Records Administration, Still Picture Branch, Panama Canal Collection Series 185-G, #453, Washington, D.C.). Aerial view of Quarry Heights and Balboa from Sosa Hill - Quarry Heights Military Reservation, Ancon Hill, Balboa, Former Panama Canal Zone, CZ

27 CFR 555.103 - Transactions among licensees/permittees and transactions among licensees and holders of user...

Code of Federal Regulations, 2013 CFR

2013-04-01

... explosive materials, e.g., resale, mining, quarrying, agriculture, construction, sport rocketry, road... the explosive materials, e.g., resale, mining, quarrying, agriculture, construction, sport rocketry... Management and Budget under control number 1140-0079) [ATF No. 1, 68 FR 13787, Mar. 20, 2003, as amended by...

Analytic hierarchy process helps select site for limestone quarry expansion in Barbados.

PubMed

Dey, Prasanta Kumar; Ramcharan, Eugene K

2008-09-01

Site selection is a key activity for quarry expansion to support cement production, and is governed by factors such as resource availability, logistics, costs, and socio-economic-environmental factors. Adequate consideration of all the factors facilitates both industrial productivity and sustainable economic growth. This study illustrates the site selection process that was undertaken for the expansion of limestone quarry operations to support cement production in Barbados. First, alternate sites with adequate resources to support a 25-year development horizon were identified. Second, technical and socio-economic-environmental factors were then identified. Third, a database was developed for each site with respect to each factor. Fourth, a hierarchical model in analytic hierarchy process (AHP) framework was then developed. Fifth, the relative ranking of the alternate sites was then derived through pair wise comparison in all the levels and through subsequent synthesizing of the results across the hierarchy through computer software (Expert Choice). The study reveals that an integrated framework using the AHP can help select a site for the quarry expansion project in Barbados.

Application of preliminary risk analysis at marble finishing plants in Recife's metropolitan area.

PubMed

de Melo Neto, Rútilo P; Kohlman Rabbani, Emilia R

2012-01-01

The finishing of marble occurs in quarries all over Brazil, being the most significant dimension of the ornamental stone sector, with 7,000 businesses. Recife's Metropolitan Area (RMR) contains approximately 106 marble quarries, 25 of them unionized. The study focused on the application of Preliminary Risk Analysis, conducted at two unionized quarries: M1, a small business; and the second, M2, considered a micro enterprise. In this analysis both the administrative and the productive sectors were evaluated. The fieldwork was done in the month of December 2010. The study revealed that the two quarries carried moderate risks in the administrative sector, mainly due to ergonomic factors, and that in the productive sectors the risks were high, specifically because of excess noise, dust material, and precarious electrical installations. Using the results of the qualitative analysis as a base, the need for quantitative study presents itself in order to determine the most adequate modes of protection to be of assistance in the management of these risks, guaranteeing the safety and health of the worker and consequently the improvement in productivity in this sector.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Imes, J.L.; Kleeschulte, M.J.

Ground-water-level measurements to support remedial actions were made in 37 piezometers and 19 monitoring wells during a 19-month period to assess the potential for ground-water flow from an abandoned quarry to the nearby St. Charles County well field, which withdraws water from the base of the alluvial aquifer. From 1957 to 1966, low-level radioactive waste products from the Weldon Spring chemical plant were placed in the quarry a few hundred feet north of the Missouri River alluvial plain. Uranium-based contaminants subsequently were detected in alluvial ground water south of the quarry. During all but flood conditions, lateral ground-water flow inmore » the bedrock from the quarry, as interpreted from water-table maps, generally is southwest toward Little Femme Osage Creek or south into the alluvial aquifer. After entering the alluvial aquifer, the ground water flows southeast to east toward a ground-water depression presumably produced by pumping at the St. Charles County well field. The depression position varies depending on the Missouri River stage and probably the number and location of active wells in the St. Charles County well field.« less

Groundwater monitoring of an open-pit limestone quarry: groundwater characteristics, evolution and their connections to rock slopes.

PubMed

Eang, Khy Eam; Igarashi, Toshifumi; Fujinaga, Ryota; Kondo, Megumi; Tabelin, Carlito Baltazar

2018-03-06

Groundwater flow and its geochemical evolution in mines are important not only in the study of contaminant migration but also in the effective planning of excavation. The effects of groundwater on the stability of rock slopes and other mine constructions especially in limestone quarries are crucial because calcite, the major mineral component of limestone, is moderately soluble in water. In this study, evolution of groundwater in a limestone quarry located in Chichibu city was monitored to understand the geochemical processes occurring within the rock strata of the quarry and changes in the chemistry of groundwater, which suggests zones of deformations that may affect the stability of rock slopes. There are three distinct geological formations in the quarry: limestone layer, interbedded layer of limestone and slaty greenstone, and slaty greenstone layer as basement rock. Although the hydrochemical facies of all groundwater samples were Ca-HCO 3 type water, changes in the geochemical properties of groundwater from the three geological formations were observed. In particular, significant changes in the chemical properties of several groundwater samples along the interbedded layer were observed, which could be attributed to the mixing of groundwater from the limestone and slaty greenstone layers. On the rainy day, the concentrations of Ca 2+ and HCO 3 - in the groundwater fluctuated notably, and the groundwater flowing along the interbedded layer was dominated by groundwater from the limestone layer. These suggest that groundwater along the interbedded layer may affect the stability of rock slopes.

DOSAGE DES ELEMENTS EN TRACE DES CALCAIRES AU SERVICE DE L'ARCHEOLOGIE

DOE Office of Scientific and Technical Information (OSTI.GOV)

BLANC,A.; HOLMES,L.; HARBOTTLE,G.

1998-05-01

Numerous quarries in the Lutetian limestone formations of the Paris Basin provided stone for the building and the decoration of monuments from antiquity to the present. To determine the origin of stone used for masonry and sculptures in these monuments, a team of geologists and archaeologists has investigated 300 quarries and collected 2,300 samples. Petrographic and paleontologic examination of thin sections allows geologists to distinguish Lutetian limestones from Jurassic and Cretaceous limestones. Geologists also seek to formulate hypotheses regarding the origin of Lutetian limestones used for building and sculpture in the Paris region. In the search for the sources ofmore » building and sculptural stone, the analytical methods of geologists are limited because often several quarries produce the same lithofacies. A new tool is now available, however, to attack questions of provenance raised by art historians. Because limestones from different sources have distinctive patterns of trace-element concentrations, compositional analysis by neutron activation allows them to compare building or sculptural stone from one monument with stone from quarries or other monuments. This analytical method subjects a powdered limestone sample to standard neutron activation analysis procedures at Brookhaven National Laboratory. With the help of computer programs, the compositional fingerprints of Lutetian limestones can be determined and stored in a database. The limestone database contains data for approximately 2,100 samples from monuments, sculptures and quarries. It is particularly rich in samples from the Paris Basin.« less

[Dust concentration analysis in non-coal mining. Exposure evaluation based on measurements performed by occupational hygiene laboratories in the years 2001-2005 in Poland].

PubMed

Bujak-Pietrek, Stella; Mikołajczyk, Urszula; Szadkowska-Stańczyk, Irena

2011-01-01

Non-coal mining includes the extraction of materials for construction (stone, gravel, sand and clay), chemical industry (salt and sulfur), metallurgy (metal ores, uranium and thorium) and other mining and quarrying. Regardless of the type of mining company one of the most common health hazards in this sector is exposure to high concentrations of dust occurring during the extraction of materials. Such activities as drilling, use of blasting agents, processing of raw material, its transportation and loading are the source of large amounts of dust containing crystalline silica. Data on exposure to dust, collected by industrial hygiene laboratories on the basis of dust concentration measurements in the work environment, were obtained from the sanitary inspection service. The analysis of dust concentrations at workplaces in non-coal mining covered the years 2001-2005. The average concentration of inhalable and respirable dust and the degree of results dispersion at workposts in different branches of non-coal mining (according to NACE rev1.1) were evaluated. Also there was estimated the percentage of surveys indicating dust concentrations above hygiene standards. Almost 5000 measurements of dust concentrations were performed in the years under study. The highest concentration of inhalable dust was noted for the production of salt (5.51 mg/m3), other mining and quarrying (4.30 mg/m3) and quarrying of slate (3.77 mg/m3). For respirable dust the highest concentrations were noted in other mining and quarrying (1.10 mg/m3), quarrying of slate (1.09 mg/m3) and quarrying of stone (0.81 mg/m3). Exposure to high concentrations of dust during the extraction of non-carbon is still an important hazard to human health. Almost for all workposts under study the excess of hygiene standards were observed.

Behavior and Release of Nitrogen at Mines and Quarries in Nordic Conditions

NASA Astrophysics Data System (ADS)

Karlsson, Teemu; Neitola, Raisa; Jermakka, Johannes; Merta, Elina; Mroueh, Ulla-Maija

2015-04-01

The increased extraction of mineral resources and mining activities creates added pressure on the environmental issues and a proper water management in mining areas in Finland. Among others, nitrogen compounds released from explosives or from mining processes can have a detrimental effect on the environment. Thus, this project aimed at comprehensive understanding on the nitrogen issue in the extractive industry. The project collected essential data on nitrogen compounds present in the environments of mines and quarries, and generated better understanding of the discharge and behaviour of nitrogen compounds in mining areas. The sources and balances of explosives-originated nitrogen compounds at mines and quarries of different sizes were investigated and compared. Additionally, the focus was in 'nitrogen smudging' problem of waste rocks and the intensity, as well as evolution and chemical characteristics of their nitrogen contamination. According to the results, the total load of potential nitrogen to the environment depends on the scale and type of the activity as well as the type of explosives used. The main emission sources of nitrogen are process and dewatering waters. A lysimeter study showed that the explosives originated nitrogen content of left over stones from natural stone quarrying is relatively low and ca. half of the nitrogen is leached within the first weeks after detonation. The "nitrogen smudging" of natural stone quarrying left over stones is relatively low to begin with and enhanced by the rapid flushing by rainwater, thus the residues of explosives should not be considered to prevent the utilization of otherwise mineralogically inert waste rocks of good technical quality. The overall nitrogen management should take into account the background concentrations and sensitivity of the local ecosystem. The research project "Solution for Control of Nitrogen Discharges at Mines and Quarries, (MINIMAN)" was realized during years 2012-2014 as a cooperative project with GTK, VTT and TTY together with several industrial and international partners and financed by Tekes Green Mining Programme.

Seismo-acoustic analysis of the near quarry blasts using Plostina small aperture array

NASA Astrophysics Data System (ADS)

Ghica, Daniela; Stancu, Iulian; Ionescu, Constantin

2013-04-01

Seismic and acoustic signals are important to recognize different type of industrial blasting sources in order to discriminate between them and natural earthquakes. We have analyzed the seismic events listed in the Romanian catalogue (Romplus) for the time interval between 2011 and 2012, and occurred in the Dobrogea region, in order to determine detection seismo-acoustic signals of quarry blasts by Plostina array stations. Dobrogea is known as a seismic region characterized by crustal earthquakes with low magnitudes; at the same time, over 40 quarry mines are located in the area, being sources of blasts recorded both with the seismic and infrasound sensors of the Romanian Seismic Network. Plostina seismo-acoustic array, deployed in the central part of Romania, consists of 7 seismic sites (3C broad-band instruments and accelerometers) collocated with 7 infrasound instruments. The array is particularly used for the seismic monitoring of the local and regional events, as well as for the detection of infrasonic signals produced by various sources. Considering the characteristics of the infrasound sensors (frequency range, dynamic, sensibility), the array proved its efficiency in observing the signals produced by explosions, mine explosion and quarry blasts. The quarry mines included for this study cover distances of two hundreds of kilometers from the station and routinely generate explosions that are detected as seismic and infrasonic signals with Plostina array. The combined seismo-acoustic analysis uses two types of detectors for signal identification: one, applied for the seismic signal identification, is based on array processing techniques (beamforming and frequency-wave number analysis), while the other one, which is used for infrasound detection and characterization, is the automatic detector DFX-PMCC (Progressive Multi-Channel Correlation Method). Infrasonic waves generated by quarry blasts have frequencies ranging from 0.05 Hz up to at least 6 Hz and amplitudes below 5 Pa. Seismic data analysis shows that the frequency range of the signals are above 2 Hz. Surface explosions such as quarry blasts are useful sources for checking detection and location efficiency, when seismic measurements are added. The process is crucial for discrimination purposes and for establishing of a set of ground-truth infrasound events. Ground truth information plays a key role in the interpretation of infrasound signals, by including near-field observations from industrial blasts.

Evolution of the alteration process in time of granitic materials from Valdemorillo quarries used in built heritage, Madrid, Spain

NASA Astrophysics Data System (ADS)

Alvarez de Buergo, M.; Fort, R.; Perez-Monserrat, E. M.

2012-04-01

Alteration of building materials used for heritage construction already starts in the quarries, where materials are subjected to both natural alteration and anthropic decay, this latter caused by the rock extracting, cutting and carving processes. Once the materials are placed in the building, they are exposed to other agents that accelerate their decay, especially if they are exposed to aggressive environments. Materials petrophysical properties tend to vary according to the alteration degree they have experienced, the longer they have been exposed to decay agents, the greater the properties change. Surface hardness of granitic rocks tend to diminish when they deteriorate, increasing its porosity, which usually is reflected on a decrease of the ultrasound propagation velocity measurements. Ultrasound velocity and surface hardness were measured in 200 monzogranite ashlars use to build the Assumption of Our Lady church (Valdemorillo, Madrid, Spain). Ultrasound velocity was measured using the indirect transmission mode, with 54 kHz frequency transductors, and surface hardness by means of the Schmidt hammer rebound tester. This monument was erected in different building stages. The starting point was a Mozarab or Visigoth defensive tower (8th century). Templars readapt it to a castle-convent (12th and 14th centuries), the tower being converted into a higher bell-tower. During the 14th-15th centuries the Cistercian Order made significant modifications of the complex, being the construction of the Chapter House one of the last enlargements during the 17th century. The quarries located in the surroundings of the monument were used for the first building stages. In the recent fronts of these quarries that have been used along the 20th century, ultrasound and hardness measurements were performed to obtain the values of these parameters in unaltered materials to compare them to those measured in ashlars from different constructive periods. A total of 50 recent front quarries were measured. Results show that quarry granites ultrasound velocity is much higher than those measured in the granite building. The older the monument ashlars, the lower the US velocity values: from data of 2 515±630 ms-1 in quarry materials we measured velocities of 1 880±720 ms-1 in 17th ashlars, 1 415 ±335 ms-1 in 12th-13th ashlars and 1 040±170 ms-1 for the oldest granites (8th century). At the same time, for sclerommetric index, values decrease from 30±10 in quarries to 22±4 in the 8th century ashlars, 24 ±4 (12th-13th centuries) and 26 ± 5 for the granites placed back in the 17th century.

7 CFR 330.300 - Soil from foreign countries or Territories or possessions. 1

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 5 2012-01-01 2012-01-01 false Soil from foreign countries or Territories or...; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Soil, Stone, And Quarry Products § 330.300 Soil from foreign countries or Territories or possessions. 1 1 The movement of soil from...

7 CFR 330.300 - Soil from foreign countries or Territories or possessions. 1

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 5 2014-01-01 2014-01-01 false Soil from foreign countries or Territories or...; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Soil, Stone, And Quarry Products § 330.300 Soil from foreign countries or Territories or possessions. 1 1 The movement of soil from...

7 CFR 330.300 - Soil from foreign countries or Territories or possessions. 1

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 5 2011-01-01 2011-01-01 false Soil from foreign countries or Territories or...; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Soil, Stone, And Quarry Products § 330.300 Soil from foreign countries or Territories or possessions. 1 1 The movement of soil from...

7 CFR 330.300 - Soil from foreign countries or Territories or possessions. 1

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Soil from foreign countries or Territories or...; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Soil, Stone, And Quarry Products § 330.300 Soil from foreign countries or Territories or possessions. 1 1 The movement of soil from...

7 CFR 330.300 - Soil from foreign countries or Territories or possessions. 1

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 5 2013-01-01 2013-01-01 false Soil from foreign countries or Territories or...; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Soil, Stone, And Quarry Products § 330.300 Soil from foreign countries or Territories or possessions. 1 1 The movement of soil from...

Deep Impact Spots Quarry

NASA Technical Reports Server (NTRS)

2005-01-01

Sixty-nine days before it gets up-close-and-personal with a comet, NASA's Deep Impact spacecraft successfully photographed its quarry, comet Tempel 1, at a distance of 39.7 million miles. The image, taken on April 25, 2005, is the first of many comet portraits Deep Impact will take leading up to its historic comet encounter on July 4.

Reducing the risk of the collapse of the soil by macro system modeling the slopes stability of the quarries

NASA Astrophysics Data System (ADS)

Klimova, E. V.; Semeykin, A. Yu

2018-01-01

The urgent task of modern production is to reduce the risks of man-made disasters and, as a consequence, preserve the life and health of workers, material properties and natural environment. In the mining industry, one of the reasons for the high level of injuries and accidents is the collapse of the soil. Macro system modelling of slopes stability of the quarries is based on the compliance with the conditions of physical and mathematical correctness of the application of the model of a continuous medium. This type of modelling allows to choose the safe parameters of the slopes of the quarries and to reduce the risk of collapse of the soil.

Testing different discrimination methods between microearthquakes and quarry blasts - a case study in Hungary

NASA Astrophysics Data System (ADS)

Kalocsai, Lilla; Kiszely, Márta; Süle, Bálint; Győri, Erzsébet

2017-04-01

Due to the development of seismological network, increasing number of events have been detected in the last years in Hungary. However about 50% of these shocks were quarry blasts. Therefore decontamination of catalogue for revealing the reliable natural seismicity has become an important task. We have studied the events occurring in the surroundings of Mecsek Hills. The goal of our research was to find the best method to separate earthquakes and quarry blasts. In the first step we have studied the diurnal distributions of the events. Because of different focal mechanisms, the waveforms and amplitudes of arriving phases of earthquakes and quarry blasts are different. We have tested the most typical parameter, the P and S amplitude ratio, which is often used for separation. The waveform similarities have been analyzed using cross-correlation matrix and dendrograms. The earthquakes and the blasts of different quarries have been arranged into different clusters. We have computed spectrograms and because the blasts were carried out by delay-fired technology we have computed binary spectrograms too. Computation of binary spectra is a useful visualization method to recognize the delay-fired explosions, because it emphasizes the long-duration modulations of the spectra. It is made from the original spectra by application of a filter that replaces the spectral amplitudes with a binary code, which simply reflects the local spectral highs and lows. The modulations were present in most of the spectra of blasts and in contrast to the earthquakes, the modulations have been observable until the end of the spectrogram. We also have studied the scalloping and steepness of the spectra.

Maximum volume cuboids for arbitrarily shaped in-situ rock blocks as determined by discontinuity analysis—A genetic algorithm approach

NASA Astrophysics Data System (ADS)

Ülker, Erkan; Turanboy, Alparslan

2009-07-01

The block stone industry is one of the main commercial use of rock. The economic potential of any block quarry depends on the recovery rate, which is defined as the total volume of useful rough blocks extractable from a fixed rock volume in relation to the total volume of moved material. The natural fracture system, the rock type(s) and the extraction method used directly influence the recovery rate. The major aims of this study are to establish a theoretical framework for optimising the extraction process in marble quarries for a given fracture system, and for predicting the recovery rate of the excavated blocks. We have developed a new approach by taking into consideration only the fracture structure for maximum block recovery in block quarries. The complete model uses a linear approach based on basic geometric features of discontinuities for 3D models, a tree structure (TS) for individual investigation and finally a genetic algorithm (GA) for the obtained cuboid volume(s). We tested our new model in a selected marble quarry in the town of İscehisar (AFYONKARAHİSAR—TURKEY).

Structural analysis of sheath folds in the Sylacauga Marble Group, Talladega slate belt, southern Appalachians

USGS Publications Warehouse

Mies, J.W.

1993-01-01

Remnant blocks of marble from the Moretti-Harrah dimension-stone quarry provide excellent exposure of meter-scale sheath folds. Tubular structures with elliptical cross-sections (4 ???Ryz ??? 5) are the most common expression of the folds. The tubes are elongate subparallel to stretching lineation and are defined by centimeter-scale layers of schist. Eccentrically nested elliptical patterns and opposing asymmetry of folds ('S' and 'Z') are consistent with the sheath-fold interpretation. Sheath folds are locally numerous in the Moretti-Harrah quarry but are not widely distributed in the Sylacauga Marble Group; reconnaissance in neighboring quarries provided no additional observations. The presence of sheath folds in part of the Talladega slate belt indicates a local history of plastic, non-coaxial deformation. Such a history of deformation is substantiated by petrographic study of an extracted hinge from the Moretti-Harrah quarry. The sheath folds are modeled as due to passive amplification of initial structures during simple shear, using both analytic geometry and graphic simulation. As indicated by these models, relatively large shear strains (y ??? 9) and longitudinal initial structures are required. The shear strain presumably relates to NW-directed displacement of overlying crystalline rocks during late Paleozoic orogeny. ?? 1993.

Asbestos exposure during quarrying and processing of serpentinites: a case study in Valmalenco, Central Alps, Northern Italy

NASA Astrophysics Data System (ADS)

Cavallo, A.; Rimoldi, B.

2012-04-01

Serpentinites are metamorphic rocks derived from ultramafics such as peridotites (lherzolites and/or harzburgites), with a typical mineralogical assemblage of antigorite, olivine, diopside and minor magnetite, chlorite and chrysotile. If the rock mass has good geotechnical properties, these stones are quarried because of their wide variety of green shades and outstanding technical properties. Excellent stones are produced in the Malenco Valley, Central Alps (northern Italy, Sondrio): here the geological set-up is dominated by the ultramafic Malenco massif (lower crust-mantle complex), exposed at the Penninic to Austroalpine boundary zone. Different processing operations give origin to valuable products like stoves, funeral monuments, design home appliances; important building element as roof slabs, tiles for floor and wall coverings constitute the main commercial line of production. In this area, good quality long fibre chrysotile asbestos was mined since the XIX century, till the seventies. The asbestos fissures (mostly slip-fiber) are well known in Valmalenco, associated to an important ENE-WSW striking fracture and hydrothermal vein system. Some actual serpentinite quarries "cross" at times tunnels of the old asbestos mines, because the fracture and vein system "guides" the extraction. At present time, this area represents an excellent example of naturally occurring asbestos (NOA). For these reasons, workers' exposure to asbestos during quarrying and processing cannot be ruled out, and must be assessed according to national laws. From 2004 to nowadays, the INAIL Regional Management of Lombardia, with the collaboration of University of Milan-Bicocca, carried out extensive monitoring campaigns both in quarries and in processing laboratories. More than 300 massive samples (rocks and veins) and 250 airborne dust samples were collected during the surveys. One of the main problems in the study of massive serpentinites is the accurate identification of the different serpentine minerals due to the close resemblance of their basic structures. For this reason, the massive samples were studied by combined use of optical microscopy, SEM-EDS, X-ray powder diffraction and FT-IR. Geological and geostructural mapping of the chrysotile veins was also performed by the University, in order to characterize and quantify the "asbestos content" in each quarry. The analyses performed on massive samples showed that chrysotile asbestos is concentrated only along fissures and veins, and is not "dispersed" in the rock. Airborne personal and environmental samples (performed both in quarries and laboratories), were analyzed by means of phase-contrast microscopy (PCM) and SEM-EDS. The exposure values were extremely variable, and mostly below the permissible exposure level. The airborne samples revealed some critical details: the extreme fineness of chrysotile fibers (not detectable by PCM), the presence of chrysotile "aggregates", the difficulty to distinguish between chrysotile and splintery antigorite fragments (produced by mechanical fragmentation during quarrying and processing). Prevention actions were planned on the basis of the analytical results, and are still in progress: preliminary geological surveys (in order to avoid mineralized fissures), drilling technologies, dust suction and water abatement were tested in the field, procedural and organizational solutions are implemented both in the quarries and in the processing sites. Employers and workers are trained appropriately according to the law. A specific method for monitoring NOA exposure in these workplaces will be soon released.

Geohydrology of the Gallup's Quarry area, Plainfield, Connecticut

USGS Publications Warehouse

Melvin, Robert L.; Stone, Janet Radway; Craft, Patrick A.; Lane, John W.

1995-01-01

The geohydrology of the Gallup's Quarry area in Plainfield, Connecticut was characterized by the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency, to provide a preliminary framework for future remedial efforts. Gallup's Quarry, an inactive sand and gravel pit, was the site of unregulated disposal of an unknown volume of chemical wastes from at least the summer of 1977 until January 1978. Existing information collected for the Connecticut Department of Environmental Protection during 1978-82 showed that ground water beneath Gallup's Quarry and adjacent land to the northwest was contaminated by organic and inorganic compounds. There is also some evidence for contamination of Mill Brook, which is located north and northwest of the disposal areas. Geologic mapping and subsurface data show that unconsolidated surficial materials up to 90 feet thick overlie fractured crystalline bedrock in most of the Gallup's Quarry area. The surficial materials consist primarily of stratified drift and till. Texture changes vertically and laterally within the stratified drift; grain size ranges from very coarse to fine. Till blankets the bedrock surface beneath the stratified drift and is a few feet to as much as 25 feet thick. Bedrock is exposed at land surface in a hill in the southeastern part of the quarry and slopes to depths of up to 90 feet beneath the area west and north of the disposal sites. The bedrock is a dark, fine-grained, fractured and jointed blastomylonite and hornblende gneiss of the Quinebaug Formation. It is likely that a west- northwest-trending fault is present in the bedrock beneath Gallup's Quarry; this fault, if present, may provide a preferential pathway for ground-water flow and contaminant transport. The principal horizontal direction of ground-water flow and movement of dissolved contaminants in the stratified drift was to the northwest of the waste-disposal areas toward Mill Brook in 1978. Estimates of average annual recharge based on regional analyses for 1978-91 are 30 inches in areas where stratified drift are exposed and 9.6 inches in areas where till and crystalline bedrock are exposed. The hydraulic conductivity of the coarse-grained stratified drift, identified in earlier U.S. Geological Survey studies as part of an aquifer capable of yielding large quantities of water, may be several hundred feet per day. The hydraulic conductivity of the till, based on regional information, is likely 0.04 to 24 feet per day. More detailed geohydrologic information is required to develop effective remedial programs at Gallup's Quarry, particularly in the areas north and west of the waste-disposal areas. Detailed subsurface geologic mapping and definition of head distribution and other hydraulic properties of each geohydrologic unit would indicate directions and rates of ground-water flow. Most importantly, the present extent of contamination of water and sediments throughout the area will have to be determined.

Visual Analysis as a design and decision-making tool in the development of a quarry

Treesearch

Randall Boyd Fitzgerald

1979-01-01

In order to obtain local and state government approvals, an environmental impact analysis of the mining and reclamation of a proposed hard rock quarry was required. High visibility of the proposed mining area from the adjacent community required a visual impact analysis in the planning and design of the project. The Visual Analysis defined design criteria for the...

Floodplain/wetlands assessment for the interceptor trench field study near the Weldon Spring Quarry, Weldon Spring Site, Missouri

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Lonkhuyzen, R.A.

1999-12-15

The US Department of Energy proposes to construct a groundwater interceptor trench near the Weldon Spring Quarry at the Weldon Spring Site in Missouri. The trench would be located near two palustrine wetland areas. Impacts to wetland hydrology and biotic communities are expected to be negligible. No long-term adverse impacts to floodplains are expected.

New data towards the development of a comprehensive taphonomic framework for the Late Jurassic Cleveland-Lloyd Dinosaur Quarry, Central Utah

PubMed Central

Warnock, Jonathan P.; Eberhart, Shawn L.; Clawson, Steven R.; Noto, Christopher R.

2017-01-01

The Cleveland-Lloyd Dinosaur Quarry (CLDQ) is the densest deposit of Jurassic theropod dinosaurs discovered to date. Unlike typical Jurassic bone deposits, it is dominated by the presence of Allosaurus fragilis. Since excavation began in the 1920s, numerous hypotheses have been put forward to explain the taphonomy of CLDQ, including a predator trap, a drought assemblage, and a poison spring. In an effort to reconcile the various interpretations of the quarry and reach a consensus on the depositional history of CLDQ, new data is required to develop a robust taphonomic framework congruent with all available data. Here we present two new data sets that aid in the development of such a robust taphonomic framework for CLDQ. First, x-ray fluorescence of CLDQ sediments indicate elevated barite and sulfide minerals relative to other sediments from the Morrison Formation in the region, suggesting an ephemeral environment dominated by periods of hypereutrophic conditions during bone accumulation. Second, the degree of abrasion and hydraulic equivalency of small bone fragments dispersed throughout the matrix were analyzed from CLDQ. Results of these analyses suggest that bone fragments are autochthonous or parautochthonous and are derived from bones deposited in the assemblage rather than transported. The variability in abrasion exhibited by the fragments is most parsimoniously explained by local periodic re-working and re-deposition during seasonal fluctuations throughout the duration of the quarry assemblage. Collectively, these data support previous interpretations that the CLDQ represents an attritional assemblage in a poorly-drained overbank deposit where vertebrate remains were introduced post-mortem to an ephemeral pond during flood conditions. Furthermore, while the elevated heavy metals detected at the Cleveland-Lloyd Dinosaur Quarry are not likely the primary driver for the accumulation of carcasses, they are likely the result of multiple sources; some metals may be derived from post-depositional and diagenetic processes, and others are potentially produced from an abundance of decomposing vertebrate carcasses. These new data help to support the inferred depositional environment of the quarry as an ephemeral pond, and represent a significant step in understanding the taphonomy of the bonebed and Late Jurassic paleoecology in this region. PMID:28603668

Piedra Pajarilla: A candidate for nomination as Global Heritage Stone Resource from Spain

NASA Astrophysics Data System (ADS)

Pereira, Dolores; Gimeno, Ana; del Barrio, Santiago

2013-04-01

Piedra Pajarilla is a tourmaline bearing leucogranite outcropping at Martinamor, near Salamanca, Spain. It is part of the Hercynian granitic chain in the Spanish Central System. The stone received the local name "Piedra Pajarilla", meaning "Little Bird Stone" due to the shape of the many tourmaline aggregates that are the main visual feature of the rock. This local name has been extrapolated to every granitic stone used in the area, even if they differ significantly in mineralogy, and as recently tested in physical and mechanical properties as well. Here we present the nomination of Piedra Pajarilla as a suitable "Global Heritage Stone Resource". This stone ideally fits the newly proposed designation as it has been used since Roman times in Salamanca (Spain) and since the Middle Ages in the construction of major historic buildings, including both the Old and New Cathedrals, and many additional churches, castles and walls in the Salamanca area. Salamancás historic city core has been granted UNESCO World Heritage status in 1988, and all associated buildings, monuments and pedestrian streets are constructed from original materials. One of utilised materials, Piedra Pajarilla, was quarried for centuries from the immediate area. It was also the preferred building stone of many internationally renowned architects of Spanish origin during the 18th and 19th centuries especially involved in reconstruction following the Lisbon earthquake. Although the associated quarries are no longer active, the Piedra Pajarilla quarry sites remain relatively undisturbed and accessible. A renewal of quarrying is consequently feasible if additional stone supplies are required for heritage restoration. Thus there is also a need to preserve these historic quarries in anticipation of such work. The importance of Salamanca as emblematic heritage makes the historic stone quarries worthwhile to preserve as well. At the same time, Piedra Pajarilla can be considered as the first of several natural stones that can contribute to the denomination of a "Global Heritage Stone Province", as a suite of associated stone resources have been utilised in the historical buildings of Salamanca.

A multidisciplinary study of the Lower Cretaceous Cedar Mountain Formation, Mussentuchit Wash, Utah: a determination of the paleoenvironment and paleoecology of the Eolambia caroljonesa dinosaur quarry

USGS Publications Warehouse

Garrison, J.R.; Brinkman, D.; Nichols, D.J.; Layer, P.; Burge, D.; Thayn, D.

2007-01-01

A quarry within the Cedar Mountain Formation in Mussentuchit Wash, Emery County, Utah, produced a fossil assemblage containing the remains of at least eight juvenile iguanodontid dinosaurs (Eolambia caroljonesa). The Cedar Mountain Formation lies stratigraphically between the Tithonian-Berriasian (Upper Jurassic) Brushy Basin Member of the Morrison Formation and the Cenomanian (Upper Cretaceous) Dakota Formation. Detailed stratigraphic, sedimentological, geochronological, palynological, and paleontological data have been collected along a measured section at the site of the Cifelli #2 Eolambia caroljonesa Quarry. These data provide a chronostratigraphic and a biostratigraphic framework for the Cedar Mountain Formation and allow a detailed reconstruction of the paleoenvironment and the paleoecology of the local paleogeographic area from which E. caroljonesa have been recovered. Three 40Ar/39Ar ages ranging from 96.7 to 98.5 Ma have been obtained three stratigraphically distinct altered volcanic ash layers within the Mussentuchit Member, one of which passes through the E. caroljonesa quarry, that indicate that the quarry is latest Albian in age and that the stratigraphic boundary between the Mussentuchit Member of the Cedar Mountain Formation and the overlying Dakota Formation is at or near the Albian/Cenomanian boundary. Sedimentological and biostratigraphic data suggest that significant long-term and short-term climatic changes are recorded in the Cedar Mountain Formation. During deposition of the lower part of the formation, climatic conditions were warm and arid to semi-arid. During deposition of the upper part of the formation, conditions became more humid. The progressive change in climatic conditions was probably related to the transgression of the Mowry Sea from the north. Cyclic sedimentation in the Mussentuchit Member suggests high-frequency changes from wet to dry periods. ?? 2007 Elsevier Ltd. All rights reserved.

Geology of the Carnegie museum dinosaur quarry site of Diplodocus carnegii, Sheep Creek, Wyoming

USGS Publications Warehouse

Brezinski, D.K.; Kollar, A.D.

2008-01-01

The holotype of Diplodocus carnegii Hatcher, 1901, consists of a partial skeleton (CM 84) that was recovered, along with a second partial skeleton of the same species (CM 94), from the upper 10 m of the Talking Rock facies of the Brushy Basin Member of the Morrison Formation exposed along Bone Quarry Draw, a tributary of Sheep Creek in Albany County, Wyoming. A composite measured section of the stratigraphic interval exposed adjacent to the quarry indicates that the Brushy Basin Member in this area is a stacked succession of lithofacies consisting of hackly, greenish gray, calcareous mudstone and greenish brown, dense, fine-grained limestone. The more erosion resistant limestone layers can be traced over many hundreds of meters. Thus, these strata do not appear to represent a highly localized deposit such as a stream channel, oxbow lake, or backwater pond. The Sheep Creek succession is interpreted as representing a clastic-dominated lake where high turbidity and sediment influx produced deposition of calcareous mudstone. During drier periods the lake's turbidity decreased and limestone and dolomite precipitation replaced mud deposition. Microkarsting at the top of some limestone/ dolomite layers suggests subaerial deposition may have prevailed during these dry episodes. The quarry of D. carnegii was excavated within the top strata of one of the numerous intervals of hackly, greenish gray, calcareous mudstone that represent an ephemeral freshwater lake. The quarry strata are directly overlain by 0.3 m of dolomite-capped limestone that was deposited shortly after interment of D. carnegii in the lake mudstones. The close vertical proximity of the overlying limestone to the skeleton's stratigraphic: level suggests that the animal's carcass may have been buried beneath the drying lake deposits during a period of decreased rainfall.

The effect of pH on metal accumulation in two Alyssum species.

PubMed

Kukier, Urszula; Peters, Carinne A; Chaney, Rufus L; Angle, J Scott; Roseberg, Richard J

2004-01-01

Nickel phytoextraction using hyperaccumulator plants offers a potential for profit while decontaminating soils. Although soil pH is considered a key factor in metal uptake by crops, little is known about soil pH effects on metal uptake by hyperaccumulator plants. Two Ni and Co hyperaccumulators, Alyssum murale and A. corsicum, were grown in Quarry muck (Terric Haplohemist) and Welland (Typic Epiaquoll) soils contaminated by a Ni refinery in Port Colborne, Ontario, Canada, and in the serpentine Brockman soil (Typic Xerochrepts) from Oregon, USA. Soils were acidified and limed to cover pH from strongly acidic to mildly alkaline. Alyssum grown in both industrially contaminated soils exhibited increased Ni concentration in shoots as soil pH increased despite a decrease in water-soluble soil Ni, opposite to that seen with agricultural crop plants. A small decrease in Alyssum shoot Ni concentration as soil pH increased was observed in the serpentine soil. The highest fraction of total soil Ni was phytoextracted from Quarry muck (6.3%), followed by Welland (4.7%), and Brockman (0.84%). Maximum Ni phytoextraction was achieved at pH 7.3, 7.7, and 6.4 in the Quarry, Welland, and Brockman soils, respectively. Cobalt concentrations in shoots increased with soil pH increase in the Quarry muck, but decreased in the Welland soil. Plants extracted 1.71, 0.83, and 0.05% of the total soil Co from Welland, Quarry, and Brockman, respectively. The differences in uptake pattern of Ni and Co by Alyssum from different soils and pH were probably related to the differences in organic matter and iron contents of the soils.

Noise-Induced Hearing Loss Among Quarry Workers in a North-Eastern State of Malaysia: A Study on Knowledge, Attitude and Practice

PubMed Central

Ismail, Ahmad Filza; Daud, Aziah; Ismail, Zaliha; Abdullah, Baharudin

2013-01-01

Objectives Noise is known to be one of the environmental and occupational hazards listed in the Factory and Machinery Act 1967. Quarries with loud deafening sounds from trucks and machineries pose the risk of noise-induced hearing loss to workers. This study was designed to assess the knowledge, attitude and practice towards noise-induced hearing loss and to determine the prevalence of noise-induced hearing loss and its associated factors among quarry workers in a north-eastern state of Malaysia. Methods A cross-sectional study was conducted at six quarries in a north-eastern state of Malaysia, with 97 consented respondents who answered a validated version of a questionnaire and underwent pure tone audiogram. The respondents were male, aged between 18 to 50 years, working in the quarry area for at least 6-months duration with no family history of ear diseases. Results The mean percentage scores of knowledge, attitude and practice were 44 (11), 70 (10) and 28 (16) percent, respectively. The prevalence of noise-induced hearing loss was found to be 57 (95% CI: 47, 67) with 46 (84%) having mild and moderate noise-induced hearing loss, and 34 (62%) involved both ears. Multiple logistic regressions showed that age and practice score were the associated factors with odd ratios of 1.1 (95% CI: 1.1, 1.2; p<0.001) and 0.9 (95% CI: 0.8, 1.0; p=0.008), respectively. Conclusion The knowledge, attitude and practice scores of the respondents were poor and the high prevalence of noise-induced hearing loss was contributed by factors such as poor practice and old age. PMID:24044059

U-series dating of the Late Pleistocene mammalian fauna from Wood Quarry (Steetley), Nottinghamshire, UK

NASA Astrophysics Data System (ADS)

Pike, A. W. G.; Eggins, S.; Grün, R.; Hedges, R. E. M.; Jacobi, R. M.

2005-01-01

We present the U-series dating of bones from Wood Quarry (Steetley Quarry Cave) using the diffusion-adsorption model to account for uranium uptake. The results give a weighted mean date of 66.8 ± 3.0 kyr, placing this assemblage within or just before Marine Oxygen Isotope Stage 4. The fauna is thought to correlate with the Banwell Bone Cave mammal assemblage-zone of the Early Devensian in Britain. Our results support the idea that this assemblage-zone immediately precedes the assemblage represented nearby at Pin Hole in Creswell Crags which is contemporary with the Mid-Devensian and correlates with MIS 3. Our dates, and dates for the Banwell Bone Cave mammal assemblage-zone from Stump Cross Cavern and evidence from other sites may indicate a longevity for this fauna.

Block Volume Estimation from the Discontinuity Spacing Measurements of Mesozoic Limestone Quarries, Karaburun Peninsula, Turkey

PubMed Central

Elci, Hakan; Turk, Necdet

2014-01-01

Block volumes are generally estimated by analyzing the discontinuity spacing measurements obtained either from the scan lines placed over the rock exposures or the borehole cores. Discontinuity spacing measurements made at the Mesozoic limestone quarries in Karaburun Peninsula were used to estimate the average block volumes that could be produced from them using the suggested methods in the literature. The Block Quality Designation (BQD) ratio method proposed by the authors has been found to have given in the same order of the rock block volume to the volumetric joint count (J v) method. Moreover, dimensions of the 2378 blocks produced between the years of 2009 and 2011 in the working quarries have been recorded. Assuming, that each block surfaces is a discontinuity, the mean block volume (V b), the mean volumetric joint count (J vb) and the mean block shape factor of the blocks are determined and compared with the estimated mean in situ block volumes (V in) and volumetric joint count (J vi) values estimated from the in situ discontinuity measurements. The established relations are presented as a chart to be used in practice for estimating the mean volume of blocks that can be obtained from a quarry site by analyzing the rock mass discontinuity spacing measurements. PMID:24696642

A novel environmental restoration method for an abandoned limestone quarry with a deep open pit and steep palisades: a case study

PubMed Central

Wang, Hanxun; Bai, Xueliang; Shi, Lei

2018-01-01

In general, exploitation of rock materials, such as limestone or granite exploitation, can cause serious damage to the environment near a mine area. With economic development and the ever-increasing demand for ore resources, mining activities have induced very serious environmental issues in China. Therefore, environmental restoration work around mines in China is urgently required. This study explores the Chuankou open-pit limestone quarry in Tongchuan City, Shaanxi Province, Northwest China, as the engineering case. The environmental issues caused by over 40 years of limestone exploitation, including land degradation, land occupation, dust pollution and potential geological disasters, were investigated. Combining the characteristics of this quarry with a summary of previous studies on environmental restoration work, this paper proposes a novel and systematic method that was comprehensively carried out through engineering and revegetation measures. The engineering measure, that is, the construction of an artificial slope by using local abandoned construction materials, solved the environmental problems in this quarry and provided site conditions favourable for revegetation. The revegetation measure restored the local ecosystem. This method provides both a new idea for the sustainable development of a mining area and a useful reference for analogous engineering cases. PMID:29892461

Block volume estimation from the discontinuity spacing measurements of mesozoic limestone quarries, Karaburun Peninsula, Turkey.

PubMed

Elci, Hakan; Turk, Necdet

2014-01-01

Block volumes are generally estimated by analyzing the discontinuity spacing measurements obtained either from the scan lines placed over the rock exposures or the borehole cores. Discontinuity spacing measurements made at the Mesozoic limestone quarries in Karaburun Peninsula were used to estimate the average block volumes that could be produced from them using the suggested methods in the literature. The Block Quality Designation (BQD) ratio method proposed by the authors has been found to have given in the same order of the rock block volume to the volumetric joint count (J(v)) method. Moreover, dimensions of the 2378 blocks produced between the years of 2009 and 2011 in the working quarries have been recorded. Assuming, that each block surfaces is a discontinuity, the mean block volume (V(b)), the mean volumetric joint count (J(vb)) and the mean block shape factor of the blocks are determined and compared with the estimated mean in situ block volumes (V(in)) and volumetric joint count (J(vi)) values estimated from the in situ discontinuity measurements. The established relations are presented as a chart to be used in practice for estimating the mean volume of blocks that can be obtained from a quarry site by analyzing the rock mass discontinuity spacing measurements.

Abandoned mines and their impact on the environment: Case studies from Franklin and Sterling Mines, NJ and Rondout Quarry, NY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kolkas, M.M.; Nehru, C.E.

1995-09-01

Water logged abandoned mines have an impact on the environment. In this project we selected abandoned mines from two sets of different ore bodies to learn about their environmental impact. Franklin and Sterling Pb-Zn mines, NJ and the limestone quarry in Rondout formation, NY were selected as case study examples. In the Pb-Zn mines metalimestone is the country rock and in the Rondout quarry limestone is the country rock. Soil water samples from selected strategic locations were analyzed for toxic and related heavy metal elements such as Pb, Zn, Cd, Cr and U. The levels of concentrations of these elementsmore » varied from one location to another according to the chemistry of the ore body and the ground movement throughout the area. In particular Cd, Cr and U concentration were variable from Franklin to Sterling mine. However, in the Rondout limestone (cement) quarry, higher concentrations of Cr and lower concentrations of Pb and Zn were noted. We conclude that ore body chemistry, mine dumps and tailing contaminated ponds along with the ground water movement throughout the area have an impact on the ground water and nearby river/stream contaminant chemistry in the areas.« less

The OSMATER project: promotion of stone materials from the Verbano-Cusio-Ossola region (Italy) and the Canton Ticino (Switzerland).

NASA Astrophysics Data System (ADS)

Cavallo, Alessandro; Antonella Dino, Giovanna

2013-04-01

The OSMATER (sub-Alpine Observatory Materials Territory Restoration) project, funded by the Piedmont Region (Italy) and the European Community, involved four Italian scientific bodies (Polytechnic of Turin, University of Turin, University of Milan-Bicocca, University of Bologna) and Switzerland (SUPSI). The aim was to investigate the present and historical quarrying and processing activities in the cross-border area between the Ossola Valley (Italy) and the Canton Ticino (Switzerland), and the use of dimension stones in local and national architecture. These materials are in many ways a "unique case", for their abundance and lithological variety. In the past, their extraction, processing and application characterized in a decisive way the architectural and constructive culture, both in terms of prestigious architecture and civil buildings, establishing a relationship between "stones and culture", "territory and its resources". In recent years, many of these traditions are losing importance and interest: this results in a loss of knowledge and historical memory, due mainly to the drastic changes in the market. The loss of this knowledge is likely to become irreversible in the short term, with the disappearance of people and social groups depositary of tradition. We can deduce that the creation of an "observatory", like OSMATER, is desirable and essential indeed, if we want to preserve the historical memory of the stone industry of an entire production area. The OSMATER project aimed the knowledge, recovery and enhancement of the architectural and cultural heritage of the cross-border area, through the census and classification of rocks, quarries (both active and historical - since Roman age), monuments and construction techniques typical of the sub-Alpine region, in order to create a documentation centre through a dedicated website. The first phase of the project was devoted to the identification of architectural works built with stone materials, with particular artistic and cultural interest for the study area. The monuments were selected on the basis of both their historical and social importance, and on the basis of stone materials, in order to make coherent proposals for their protection and future restoration projects. A comprehensive list of the quarries was drawn up: each quarry was characterized in terms of lithology, geotechnical properties and exploitation techniques. Where possible, traces of ancient quarrying and processing techniques were investigated and recorded, looking for correlations between stones and architectural heritage. The study area was divided basing on the exploited materials: granites (Baveno, Montorfano, Mergozzo), marbles (Ornavasso and Crevoladossola), "Beola" gneisses (Vogogna, Beura-Villadossola Trontano-Domodossola, Crevoladossola-Montecrestese), "Serizzo" gneisses (Antigorio, Formazza, Simplon, Anzasca and Divedro valleys), carbonatic rocks (Angera-Arona) and greenstones (Bognanco, Vigezzo, Brevettola and Loana valleys). Subsequently each stone from each quarry was characterized: petrography (optical microscopy, XRD, SEM-EDS), geochemistry (whole-rock by ICP-MS), physical and mechanical properties (standard tests and Hg-porosimetry). A comparison between "fresh" stones from the quarries and from the monuments has been realized, searching for correlations to the degradation. The last step was the evaluation of the monumental buildings that could be included into geo-touristic routes (quarry - laboratory - monument), for the enhancement of the local cultural heritage and resources.

Landscape evolution by subglacial quarrying

NASA Astrophysics Data System (ADS)

Ugelvig, Sofie V.; Egholm, David L.; Iverson, Neal R.

2014-05-01

In glacial landscape evolution models, subglacial erosion rates are often related to basal sliding or ice discharge by a power-law. This relation can be justified for bedrock abrasion because rock debris transported in the basal ice drives the erosion. However, a simple relation between rates of sliding and erosion is not well supported when considering models for quarrying of rock blocks from the bed. Iverson (2012) introduced a new subglacial quarrying model that operates from the theory of adhesive wear. The model is based on the fact that cavities, with a high level of bedrock differential stress, form along the lee side of bed obstacles when the sliding velocity is to high to allow for the ice to creep around the obstacles. The erosion rate is quantified by considering the likelihood of rock fracturing on topographic bumps. The model includes a statistical treatment of the bedrock weakness: larger rock bodies have lower strengths since they have greater possibility of containing a large flaw [Jaeger and Cook, 1979]. Inclusion of this effect strongly influences the erosion rates and questions the dominant role of sliding rate in standard models for subglacial erosion. Effective pressure, average bedslope, and bedrock fracture density are primary factors that, in addition to sliding rate, influence the erosion rate of this new quarrying model [Iverson, 2012]. We have implemented the quarrying model in a depth-integrated higher-order ice-sheet model [Egholm et al. 2011], coupled to a model for glacial hydrology. In order to also include the effects of cavitation on the subglacial sliding rate, we use a sliding law proposed by Schoof (2005), which includes an upper limit for the stress that can be supported at the bed. Computational experiments show that the combined influence of pressure, sliding rate and bed slope leads to realistically looking landforms such as U-shaped valleys, cirques, hanging valleys and overdeepenings. Compared to model results using a standard erosion rule, where erosion rate scales with basal sliding, the quarrying model produces valleys that are wider and have more flattened valley floors with several shallow overdeepenings. The overdeepenings are stabilized by hydrology because of the strong influence of effective pressure on quarrying rate. For melt water to escape the overdeepening, the average water pressure must rise as the overdeepening grows, and this keeps the effective pressure low and prevents the overdeepening from growing infinitely. In addition, the strong influence of effective pressure indicates that erosion rate depends strongly on ice thickness. This could associate to sudden jumps in erosion rate and fjord formation along margins that experienced periodic ice sheet configurations in the Quaternary. Egholm, D. L. et al. Modeling the flow of glaciers in steep terrains: The integrated second-order shallow ice approximation (iSOSIA). Journal of Geophysical Research, 116, F02012 (2011). Iverson, N. R. A theory of glacial quarrying for landscape evolution models. Geology, v. 40, no. 8, 679-682 (2012). Schoof, C. The effect of cavitation on glacier sliding. Proc. R. Soc. A , 461, 609-627 (2005). Jaeger, J.C., and Cook, N.G.W. Fundamentals of rock mechanics: New York, Chapman and Hall, 593 p. (1979)

55. QUARRY TILE CUTTERS, SECOND FLOOR, NORTH WING. WORKERS PRESSED ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

55. QUARRY TILE CUTTERS, SECOND FLOOR, NORTH WING. WORKERS PRESSED THE CUTTERS INTO SLABS OF CLAY, LIFTED THEM ONTO DRYING BOARDS AND PRESSED THE PLUNGERS TO RELEASE THE CUT TILES. REPRODUCTIONS CUTTERS ARE NOT USED IN PRODUCTION. WOODEN FORMS FOR PRODUCING CLAY SLABS WITH ROLLING PINS REST AGAINST THE WALL. - Moravian Pottery & Tile Works, Southwest side of State Route 313 (Swamp Road), Northwest of East Court Street, Doylestown, Bucks County, PA

Comparative study of modified bitumen binder properties collected from mixing plant and quarry.

NASA Astrophysics Data System (ADS)

Mustafa Kamal, M.; Abu Bakar, R.; Hadithon, K. A.

2017-11-01

Quality control and assurance are essential in pavement construction. In general, the properties of bitumen change as it ages in bulk storage, transport, and storage on site. The minimization of bituminous hardening during storing, transportation and mixing depends on careful control of binder temperature. Hence therefore, bitumen should always be stored and handled at the lowest temperature possible, consistent with efficient use. The objective of the work is to monitor the quality of bitumen samples collected from mixing plant and quarry. Results showed that, samples modified bitumen which collected from quarry showed some adverse effects on rheological properties and physical properties after subjecting to high temperature storage within a period of time. The dynamic stiffness, elastic properties and other common binder properties were deteriorated too. The chemical changes that occurred during storage were analysed using Fourier transform infra-red spectroscopy (FTIR). Thus studies developed an understanding of bitumen ageing in storage.

A Method of Effective Quarry Water Purifying Using Artificial Filtering Arrays

NASA Astrophysics Data System (ADS)

Tyulenev, M.; Garina, E.; Khoreshok, A.; Litvin, O.; Litvin, Y.; Maliukhina, E.

2017-01-01

The development of open pit mining in the large coal basins of Russia and other countries increases their negative impact on the environment. Along with the damage of land and air pollution by dust and combustion gases of blasting, coal pits have a significant negative impact on water resources. Polluted quarry water worsens the ecological situation on a much larger area than covered by air pollution and land damage. This significantly worsens the conditions of people living in cities and towns located near the coal pits, and complicates the subsequent restoration of the environment, irreversibly destroying the nature. Therefore, the research of quarry wastewater purifying is becoming an important mater for scholars of technical colleges and universities in the regions with developing open-pit mining. This paper describes the method of determining the basic parameters of the artificial filtering arrays formed on coal pits of Kuzbass (Western Siberia, Russia), and gives recommendations on its application.

Traces of the heritage arising from the Macelj sandstone

NASA Astrophysics Data System (ADS)

Golež, Mateja

2014-05-01

The landscape of Southeast Slovenia and its stone heritage principally reveal itself through various Miocene sandstones. The most frequently found type on the borderline between Slovenia and Croatia, i.e. east of Rogatec, is the micaceous-quartz Macelj sandstone. This rock ranges in colour from greenish grey to bluish grey and yellowish, depending on the content of glauconite, which colours it green. In its composition, the rock is a heterogeneous mixture of grains of quartz, dolomite, muscovite, microcline, anorthite and glauconite. The average size of grains is 300μm. In cross-section, they are oblong, semi-rounded or round. The mechanical-physical and durability properties of the Macelj sandstone, which have been characterised pursuant to the applicable standards for natural stone, reveal that the rock exhibits poor resistance to active substances from the atmosphere, particularly in the presence of salt. In the surroundings of Rogatec, there are around 45 abandoned quarries of the Macelj sandstone, which are the result of the exploitation of this mineral resource from the 17th century on. The local quarrymen earned their bread until 1957, when the Kambrus quarry industry closed down. From the original use of this mineral resource as construction and decorative material, the useful value of the Macelj sandstone expanded during the development of the metals industry to the manufacture of large and small grindstones for the needs of the domestic and international market. Therefore, traces of quarrying can not only be seen in the disused quarries, but also in the rich architectural heritage of Rogatec and its surroundings, the stone furniture - from portals, window frames, wells, various troughs, pavements to stone walls - and other. The living quarrying heritage slowly passed into oblivion after World War II, although the analysis of the social image of the people residing in Rogatec and its surroundings revealed that there was an average of one stonemason in every house in the period between both World Wars. Only few masters succeeded in transferring their know-how to their descendants, which is why the local community has been making efforts to include the quarrying and working of the Macelj sandstone in educational workshops that are being carried out at the Open-Air Museum in Rogatec.

Weldon Spring, Missouri, Site Annual Report for Calendar Year 2015 June 2016

DOE Office of Scientific and Technical Information (OSTI.GOV)

Starr, Ken; Deyo, Yvonne

1.1 Purpose and Scope. This report summarizes the activities, compliance status, annual inspection, and environmental monitoring results from calendar year 2015 for the Weldon Spring, Missouri, Site. The U.S. Department of Energy (DOE) prepares this annual report as part of the site’s long-term surveillance and maintenance (LTS&M) activities, in accordance with the requirements of the Long-Term Surveillance and Maintenance Plan for the Weldon Spring, Missouri, Site (LTS&M Plan) (DOE 2008a) and the Federal Facility Agreement for the Weldon Spring Site (DOE 2006). The Weldon Spring site is a Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) site. 1.2 Site Description.more » The Weldon Spring site is located in St. Charles County, Missouri, about 30 miles west of St. Louis, Missouri (Figure 1). The site comprises two geographically distinct, DOE-owned properties: the former Weldon Spring Chemical Plant and Raffinate Pit sites (Chemical Plant) and the former Weldon Spring Quarry (Quarry). The former Chemical Plant is located about 2 miles southwest of the junction of Missouri State Route 94 and Interstate 64. The Quarry is about 4 miles southwest of the former Chemical Plant. Both sites are accessible from Missouri State Route 94. During the early 1940s, the Department of the Army acquired 17,232 acres of private land in St. Charles County for the construction of the Weldon Spring Ordnance Works facility. The former Ordnance Works site has since been divided into several contiguous areas under different ownership, as depicted in Figure 2. Current land use of the former Ordnance Works site includes the former Chemical Plant and Quarry, the U.S. Army Reserve Weldon Spring Training Area, the Missouri Department of Conservation (MDC), the Missouri Department of Natural Resources (MDNR) Division of State Parks (MDNR-Parks), Francis Howell High School, a St. Charles County highway maintenance (formerly Missouri Department of Transportation [MoDOT]) facility, the Public Water Supply District No. 2 water supply facility, the St. Charles County law enforcement training center, the village of Weldon Spring Heights, and a University of Missouri research park. The former Chemical Plant and Quarry areas total 228.16 acres. The Former Chemical Plant property occupies 219.50 acres, and the Quarry occupies 8.66 acres.« less

Handling of quarry waste from schist production at Oppdal, Norway

NASA Astrophysics Data System (ADS)

Willy Danielsen, Svein; Alnæs, Lisbeth; Azrague, Kamal; Suleng, Jon

2017-04-01

Handling of quarry waste from schist production at Oppdal, Norway Svein Willy Danielsen1), Lisbeth Alnæs2), Kamal Azrague2), Jon Suleng3) 1) Geomaterials Consultant, Trondheim Norway, 2) SINTEF, Trondheim, Norway, 3) AF Gruppen AS, Oppdal, Norway A significant amount of aggregate research in Norway has been focused on the recovery and use of surplus sizes from hard rock aggregate quarries. The use of sand sized quarry waste (QW) from crushing/processing has been motivated by the rapid depletion of traditional sand/gravel resources, increasing land-use conflicts, and the need to minimise QW deposits which for some quarries are becoming a critical factor for economy as well as for environmental reasons. With an annual aggregate production of 77 million tons, out of which approximately 83 % comes from hard rock, the annual volume of size < 4 mm will be of the order of 19 million tons. Converting this into construction aggregates is a major challenge in order to obtain satisfactory mass balance. This challenge is even bigger for quarries producing decorative stones. E.g. the quarrying and production of schist products for building purpose normally utilises as little as 10-15 % of the excavated rock. Oppdal in central Norway is a main supplier of schist products for flooring, roofing and decorative purpose. The high percentage of QW is due to strict requirements to the finished products, both regarding processing and the character of the parent rock. The need to deposit large amounts of QW is a serious setback for the quarry economy. Within a limited time horizon the volumes of QW can threaten the further exploitation by merely choking the quarry. On the opposite side - any process that can convert the QW into sellable products will give a tremendous added value for the producer. Besides, the area in question is about to drain out its available aggregate resources, having to rely on long-transported sand and gravel. This has consequences not only for the economy, but also for the environment since heavy lorry transport will not be sustainable. An on-going project is now looking into converting the QW into quality aggregate both for road construction and concrete. Novel crusher technology and processing strategy is being applied and adapted, and the finished products will be tested in laboratories to establish the relevant application parameters and obtainable quality. By producing coarse aggregates for primarily road purpose, it is estimated that the QW can be reduced from todaýs approx. 90 % to approx. 40 %. The potential by also installing the latest inventions of crusher technology designed for making manufactured sand, is to further reduce QW down to < 10 %. Making all these materials sellable in the market, the economic - and also environmental - potential will be considerable. Understanding the geological conditions and petrographic properties of the rock is vital. This is a quartz-feldspar rich metamorphic rock - a meta-arkose - containing rhythmically distributed planar lamina (less than 2 mm thick) or scattered occurrence of mica, separated by layers composed predominately of quartz and feldspar. The rock can be split along the lamina to slabs varying from 0.5 cm to more than 10 cm in thickness, and the microstructure can be characterized as being granoblastic to gneissic. . This makes it possible by well designed crushing process and careful selection of the in-going rock particles, to obtain well shaped aggregates up to at least 20 mm. The on-going project will also study the total cost situation depending on the QW utilisation, discuss the environmental and sustainability issues with a societal perspective, and also consider the market opportunities.

Discrimination of Seismic Sources Using Israel Seismic Network.

DTIC Science & Technology

1996-07-01

earthquakes, quarry blasts, underwater explosions and 13 ISN stations in the Dead Sea basin and Negev region 4. Seismogram of event ESI on the Jordanian...1.5 Hz)/A 0 (10 Hz) 51 22. Example of recordings from the Negev quarry blast ES6 53 23. Example of recordings from the Dead Sea earthquake QS3 54 24...Discrimination results for the southern dataset: semblance versus 55 energy ratio IV 25. Velogram analysis, Dead Sea/ Negev region - Discrimination

Fragmentation, Cost and Environmental Effects of Plaster Stemming Method for Blasting at A Basalt Quarry

NASA Astrophysics Data System (ADS)

Cevizci, Halim

2014-10-01

In this study, the plaster stemming application for blasting at a basalt quarry is studied. Drill cuttings are generally used in open pits and quarries as the most common stemming material since these are most readily available at blast sites. However, dry drill cuttings eject very easily from blastholes without offering much resistance to blast energy. The plaster stemming method has been found to be better than the drill cuttings stemming method due to increased confinement inside the hole and better utilization of blast explosive energy in the rock. The main advantage of the new stemming method is the reduction in the cost of blasting. At a basalt quarry, blasting costs per unit volume of rock were reduced to 15% by increasing burden and spacing distances. In addition, better fragmentation was obtained by using the plaster stemming method. Blast trials showed that plaster stemming produced finer material. In the same blast tests, +30 cm size fragments were reduced to 47.3% of the total, compared to 32.6% in the conventional method of drill cuttings stemming. With this method of stemming, vibration and air shock values increased slightly due to more blast energy being available for rock breakage but generally these increased values were small and stayed under the permitted limit for blast damage criteria unless measuring distance is too close.

Nivelstein sandstone, weakly lithified pure silica sands from the Dutch-German border area, intermittently used in architecture for two millennia

NASA Astrophysics Data System (ADS)

Nijland, Timo G.; Wim Dubelaar, C.

2017-04-01

The current paper provides a concise overview of the geological setting of the Nivelstein sandstone in broad sense, its petrographic and physical characteristics, and its use as natural stone. Miocene pure silica sands occur around Heerlen in the southeastern part of the Dutch province of Limburg and Herzogenrath in adjacent Germany, as well as in the Belgian province of Limburg near Opgrimbie. In Dutch Limburg and in Germany are three large active exploitations, quarrying the sands for industrial purposes. On top of the unconsolidated sands in the Herzogenrath quarry, lithified banks of sandstone occur, known as Nivelstein (or more rarely Herzogenrath) sandstone. This sandstone has been used as dimension stone and ornamental stone since Roman times. In the 11th century the quarry was reopened and after a long period of disuse sandstone blocks were again quarried in the second half of the 19th century. The lithification of the Nivelstein sandstone usually is very weak, with grain to grain contacts and some newly formed quartz rims only. The clay content is extremely low and is restricted to tiny booklets of kaolinite. Despite the weak cementation the Nivelstein sandstone has proved to be very time-resistant building stone that forms a major element in the stone cultural heritage of the Dutch- German border area.

Contributions of human activities to suspended sediment yield during storm events from a small, steep, tropical watershed

NASA Astrophysics Data System (ADS)

Messina, A. M.; Biggs, T. W.

2016-07-01

Suspended sediment concentrations (SSC) and yields (SSY) were measured during storm and non-storm periods from undisturbed and human-disturbed portions of a small (1.8 km2), mountainous watershed that drains to a sediment-stressed coral reef. Event-wise SSY (SSYEV) was calculated for 142 storms from measurements of water discharge (Q), turbidity (T), and SSC measured downstream of three key sediment sources: undisturbed forest, an aggregate quarry, and a village. SSC and SSYEV were significantly higher downstream of the quarry during both storm- and non-storm periods. The human-disturbed subwatershed (10.1% disturbed) accounted for an average of 87% of SSYEV from the watershed. Observed sediment yield (mass) to the coast, including human disturbed subwatersheds, was 3.9× the natural background. Specific SSY (mass/area) from the disturbed quarry area was 49× higher than from natural forest compared with 8× higher from the village area. Similar to mountainous watersheds in semi-arid and temperate climates, SSYEV from both the undisturbed and disturbed watersheds correlated closely with maximum event discharge (Qmax), event total precipitation and event total Q, but not with the Erosivity Index. Best estimates of annual SSY varied by method, from 45 to 143 tons/km2/yr from the undisturbed subwatershed, 441-598 tons/km2/yr from the human-disturbed subwatershed, and 241-368 tons/km2/yr from the total watershed. Sediment yield was very sensitive to disturbance; the quarry covers 1.1% of the total watershed area, but contributed 36% of SSYEV. Given the limited access to gravel for infrastructure development, sediment disturbance from local aggregate mining may be a critical sediment source on remote islands in the Pacific and elsewhere. Identification of erosion hotspots like the quarry using rapid, event-wise measures of suspended sediment yield will help efforts to mitigate sediment stress and restore coral reefs.

Empirical Calibration of Small Explosion Seismic And Acoustic Phenomenology in New England

DTIC Science & Technology

2008-10-31

site was too close to a nearby cell /radio tower and the active quarry wall to detonate our planned 400 lb explosions. Core drilling at an...alternative test site (Figure 52) was conducted further away from the active quarry wall and a nearby cell /radio tower. The alternative site would be far...experiment was returned into the original location (Figure 52). In order to reduce the projected ground vibrations at the cell /radio tower and high

The Experience of Implementation of Innovative Technology of Quarry Waste Water Purifying in Kuzbass Open Pit

NASA Astrophysics Data System (ADS)

Lesin, Yu V.; Hellmer, M. C.

2016-08-01

Among all industries in Kuzbass (Western Siberia, Russia) the coal industry provides the most environmental threat. However, the construction of new and maintenance of existing open pit mines do not often correspond to the tasks of improving the environmental safety of surface mining. So the article describes the use of innovative quarry waste water purifying technology implemented in Kuzbass open pit mine «Shestaki». This technology is based on using artificial filter arrays made of overburden rock.

Quantification of Rock Damage from Small Explosions and Its Effect on Shear-Wave Generation

DTIC Science & Technology

2009-06-15

close to a nearby cell /radio tower and the active quarry wall to detonate our planned 400 lb explosions. Core drilling at an alternative test site...Figure ) was conducted further away from the active quarry wall and a nearby cell /radio tower. The alternative site would be far enough away from...returned into the original location (Figure ). In order to reduce the projected ground vibrations at the cell /radio tower and high wall of the active

Exploring old caves

NASA Astrophysics Data System (ADS)

Luana Belli, Maria

2015-04-01

Quarries, caves and mines often contain fossils. During the '30s in Rome, the urban expansion needs for building materials such as gravel, sand and clay were extracted from quarries that surrounded the city. One of these quarries in particular, in the area of Saccopastore (Nomentana area 3 km from the University Sapienza Roma) returned an ancient human fossil skull belonging to a Neanderthal (most likely a female) who lived in Latium about 120,000 years ago. Detailed studies of this fossil were carried out by Sergio Sergi, the son of the founder of the Museum of Anthropology in Rome, Giuseppe Sergi. The museum was founded in 1884 and was later transferred to the University City (1934) where it is still located. Professor Maria Luana Belli, a science teacher in the Liceo Scientifico "G. Keplero" is a volunteer and collaborator with the Museum "G. Sergi", and she and her students retrace the places of the discovery on the trail of the Neanderthals, for understanding the evolution of the territory in a perspective of interdisciplinary teaching.

Laser removal of graffiti from Pink Morelia Quarry

NASA Astrophysics Data System (ADS)

Penide, J.; Quintero, F.; Riveiro, A.; Sánchez-Castillo, A.; Comesaña, R.; del Val, J.; Lusquiños, F.; Pou, J.

2013-11-01

Morelia is an important city sited in Mexico. Its historical center reflects most of their culture and history, especially of the colonial period; in fact, it was appointed World Heritage Site by UNESCO. Sadly, there is a serious problem with graffiti in Morelia and its historical center is the worst affected since its delicate charming is definitely damaged. Hitherto, the conventional methods employed to remove graffiti from Pink Morelia Quarry (the most used building stone in Morelia) are quite aggressive to the appearance of the monuments, so actually, they are not a very good solution. In this work, we performed a study on the removal of graffiti from Pink Morelia Quarry by high power diode laser. We carried out an extensive experimental study looking for the optimal processing parameters, and compared a single-pass with a multi-pass method. Indeed, we achieved an effective cleaning without producing serious side effects in the stone. In conclusion, the multi-pass method emitting in continuous wave was revealed as the more effective operating modes to remove the graffiti.

High Cigarette and Poly-Tobacco Use Among Workers in a Dusty Industry: New Jersey Quarry Workers.

PubMed

Graber, Judith M; Worthington, Karen; Almberg, Kirsten S; Meng, Qingyu; Rose, Cecile S; Cohen, Robert A

2016-04-01

Tobacco use is high among US extraction and construction workers, who can also incur occupational dust exposure. Information on different types of tobacco use among quarry/mine workers is sparse. During mandated training sessions, New Jersey quarry workers were surveyed about their tobacco use. Prevalence was calculated for single and multiple tobacco use by demographic and workplace characteristics; logistic regression was used to assess associations with smoking. Two hundred forty (97.1%) workers completed surveys. Among respondents, 41.7% [95% confidence interval (95% CI) 35.4 to 48.3] currently used any tobacco product of whom 28.1% smoked cigarettes. In multivariate analysis, positive associations with smoking included working as a contractor versus mine employee (odds ratio 2.32, 95% CI 1.01 to 5.36) and a usual job title of maintenance (odds ratio 2.02, 95% CI 0.87 to 4.94). Industry-specific information may be helpful in developing targeted tobacco-cessation programs.

Developing biodiversity indicators on a stakeholders' opinions basis: the gypsum industry Key Performance Indicators framework.

PubMed

Pitz, Carline; Mahy, Grégory; Vermeulen, Cédric; Marlet, Christine; Séleck, Maxime

2016-07-01

This study aims to establish a common Key Performance Indicators (KPIs) framework for reporting about the gypsum industry biodiversity at the European level. In order to integrate different opinions and to reach a consensus framework, an original participatory process approach has been developed among different stakeholder groups: Eurogypsum, European and regional authorities, university scientists, consulting offices, European and regional associations for the conservation of nature, and the extractive industry. The strategy is developed around four main steps: (1) building of a maximum set of indicators to be submitted to stakeholders based on the literature (Focus Group method); (2) evaluating the consensus about indicators through a policy Delphi survey aiming at the prioritization of indicator classes using the Analytic Hierarchy Process method (AHP) and of individual indicators; (3) testing acceptability and feasibility through analysis of Environmental Impact Assessments (EIAs) and visits to three European quarries; (4) Eurogypsum final decision and communication. The resulting framework contains a set of 11 indicators considered the most suitable for all the stakeholders. Our KPIs respond to European legislation and strategies for biodiversity. The framework aims at improving sustainability in quarries and at helping to manage biodiversity as well as to allow the creation of coherent reporting systems. The final goal is to allow for the definition of the actual biodiversity status of gypsum quarries and allow for enhancing it. The framework is adaptable to the local context of each gypsum quarry.

Quarry identification of historical building materials by means of laser induced breakdown spectroscopy, X-ray fluorescence and chemometric analysis

NASA Astrophysics Data System (ADS)

Colao, F.; Fantoni, R.; Ortiz, P.; Vazquez, M. A.; Martin, J. M.; Ortiz, R.; Idris, N.

2010-08-01

To characterize historical building materials according to the geographic origin of the quarries from which they have been mined, the relative content of major and trace elements were determined by means of Laser Induced Breakdown Spectroscopy (LIBS) and X-ray Fluorescence (XRF) techniques. 48 different specimens were studied and the entire samples' set was divided in two different groups: the first, used as reference set, was composed by samples mined from eight different quarries located in Seville province; the second group was composed by specimens of unknown provenance collected in several historical buildings and churches in the city of Seville. Data reduction and analysis on laser induced breakdown spectroscopy and X-ray fluorescence measurements was performed using multivariate statistical approach, namely the Linear Discriminant Analysis (LDA), Principal Component Analysis (PCA) and Soft Independent Modeling of Class Analogy (SIMCA). A clear separation among reference sample materials mined from different quarries was observed in Principal Components (PC) score plots, then a supervised soft independent modeling of class analogy classification was trained and run, aiming to assess the provenance of unknown samples according to their elemental content. The obtained results were compared with the provenance assignments made on the basis of petrographical description. This work gives experimental evidence that laser induced breakdown spectroscopy measurements on a relatively small set of elements is a fast and effective method for the purpose of origin identification.

Laser Scanning for the definition of high resolution topography in the Apuan Alps (IT) marble district

NASA Astrophysics Data System (ADS)

Riccucci, Silvia; Salvini, Riccardo; Francioni, Mirko

2010-05-01

The present paper describes the results of five laser scanning surveys performed by a Leica™ ScanStation2 with the aim of producing an high definition topography of a quarry, at the scale of 1:1,000. The project comes from a joint research carried out by the Authors in collaboration with the Local Sanitary Unit Agency (ASL n.1) of Massa and Carrara (IT). The main objective of this work has been the survey of both the exploited quarry walls and the upper residual and natural slopes. The area of interest is characterized by several quarry fronts which develop to variable and alternate directions to create very evident rock spurs, from NW-SE to NE-SW trending for a total wideness of about 2 hectares. Moreover, the quarry walls are sub-vertical and sometimes overhang by a total height of 100 m in respect to the quarry floor. Differential GPS and orthometric correction have been applied in order to co-register and to georeference the five point clouds; for these purposes a series of optical targets have been measured using a Laser Total Station. The subsequent phase has been the mesh construction and editing, from which a topographic map, 25 cm equidistance contours lines, has been created. The planimetric map shows the position and the geometry of crests, banks, escarpments, walls and all others exploitation features and the characteristics of the upper natural slopes. Morphological profiles along the maximum slope have been realized in order to better plan the future extractive activities according to the regional law. In order to make easier the prospective observation of detailed and overall areas, 3D views of multi-directional orientation have been realized. The produced data has been published by using the free LeicaTM TruView plug-in for Internet Explorer in a way to easily view the photographs and to measure the laser scan point clouds. Processing results have highlighted the higher spatial resolution of data coming from laser scanning in respect to the traditional topographic methodologies. Such information can be used for multitemporal evaluation of mining volumes. For local authorities the control of extraction volumes can be more easily and rapidly executed by map algebra function of image differencing between bi-temporal Digital Dense Surface Model (DDSM) of the quarry walls. Finally, the DDSM has been utilized by the Authors to analyze the rock slope stability, to collect geological-engineering data, such as joints attitude and spacing, and to perform detailed analysis of rockfall trajectories.

Numerical analysis of instability processes in underground cavities and of the related effects at the surface

NASA Astrophysics Data System (ADS)

Lollino, Piernicola; Parise, Mario

2010-05-01

Natural and anthropogenic caves may represent a potential hazard for the built-up environment, due to the occurrence of underground instability processes, that may propagate upward and eventually reach the ground surface, thus inducing the occurrence of sinkholes. Especially when the caves are at shallow depth, the effects at the ground surface may result extremely severe. In the Apulia region of southern Italy, there are many sites where underground quarrying developed in the past, due to presence at a certain depth of rock of good quality for building purposes. Development of underground quarries, rather than open pit mines, was also favoured by the preservation of the terrains on the ground surface for agricultural practices. The Pliocene-Pleistocene calcarenite (a typical soft rock) was therefore quarried underground, by digging extensive networks of galleries in those levels within the local geological succession most suitable for the quarrying activity. With time, these underground activities have progressively been abandoned, and later on many quarries were used for other purposes, including illegal discharge of solid and liquid wastes. Many Apulian towns are nowadays located just above these caves, due to urban expansion in the last decades and loss of memory of the presence of the underground quarries. Thus, a serious risk exists for civil society, which should not be left uninvestigated. The present contribution deals with the analysis of the main factors at the origin of the instability processes described, also including those causing weathering of the soft rock wihich induces gradual decay of the physical and mechanical properties of the rock mass. Aimed at exploring the evolution with time of the stability conditions within the cavities, numerical analysis have been implemented by using finite element methods with respect to ideal situations which are representative of typical case studies in Apulia. Both the effects of local instability processes occurring within the underground case and the effects of the progressive enlargement of the caves have been explored. Sensitivity analyses have been carried out to evaluate the influence of the rock properties on the cave stability. Moreover, decay processes of the mechanical properties of the rock mass as a consequence of wetting and weathering phenomena in the areas surrounding the caves have been simulated. The results achieved from the numerical analyses have been then compared to what has been observed in situ during several field surveys and a satisfactory agreement between the numerical simulations and the instability processes detected in the field has been noticed.

A Historical Summary of the Work of the Corps of Engineers in Washington D.C. and Vicinity 1852 - 1952

DTIC Science & Technology

1952-01-01

built , and all land in Maryland needed for the conduit had been condemned . A first-class sand- stone quarry at Seneca , seven miles above Great Falls...constructed of Seneca Creek freestone obtained from the Bull Run quarry about twenty-three miles from Washington o By 1852 ~ the work was completed 9 except...pro- vided funds for an arsenal. Tragedy stalked the area in the ensuin8 years. In 1814, the arsenal was destroyed by the British, who lost

Design of a Free-running, 1/30th Froude Scaled Model Destroyer for In-situ Hydrodynamic Flow Visualization

DTIC Science & Technology

2012-06-01

Accessed 21 March 2012]. [12] ITTC Resistance Committee, "Final Report and Recommendations to the 26th ITTC," SNAME, Rio de Janeiro , 2011. [13] E. V...operating in open water, whether it is the Charles River or a local rock quarry, the depth to draft ratio will remain above the minimum value of...e.g. the Charles River , Boston Harbor, or a local rock quarry. The model will serve as a flexible test platform for future research within the MIT

Hydrogeologic controls and geochemical indicators of groundwater movement in the Niles Cone and southern East Bay Plain groundwater subbasins, Alameda County, California

USGS Publications Warehouse

Teague, Nicholas F.; Izbicki, John A.; Borchers, Jim; Kulongoski, Justin T.; Jurgens, Bryant C.

2018-02-01

Beginning in the 1970s, Alameda County Water District began infiltrating imported water through ponds in repurposed gravel quarries at the Quarry Lakes Regional Park, in the Niles Cone groundwater subbasin, to recharge groundwater and to minimize intrusion of saline, San Francisco Bay water into freshwater aquifers. Hydraulic connection between distinct aquifers underlying Quarry Lakes allows water to recharge the upper aquifer system to depths of 400 feet below land surface, and the Deep aquifer to depths of more than 650 feet. Previous studies of the Niles Cone and southern East Bay Plain groundwater subbasins suggested that these two subbasins may be hydraulically connected. Characterization of storage capacities and hydraulic properties of the complex aquifers and the structural and stratigraphic controls on groundwater movement aids in optimal storage and recovery of recharged water and provides information on the ability of aquifers shared by different water management agencies to fulfill competing storage and extraction demands. The movement of recharge water through the Niles Cone groundwater subbasin from Quarry Lakes and the possible hydraulic connection between the Niles Cone and the southern East Bay Plain groundwater subbasins were investigated using interferometric synthetic aperture radar (InSAR), water-chemistry, and isotopic data, including tritium/helium-3, helium-4, and carbon-14 age-dating techniques.InSAR data collected during refilling of the Quarry Lakes recharge ponds show corresponding ground-surface displacement. Maximum uplift was about 0.8 inches, reasonable for elastic expansion of sedimentary materials experiencing an increase in hydraulic head that resulted from pond refilling. Sodium concentrations increase while calcium and magnesium concentrations in groundwater decrease along groundwater flowpaths from the Niles Cone groundwater subbasin through the Deep aquifer to the northwest toward the southern East Bay Plain groundwater subbasin. Residual effects of pre-1970s intrusion of saline water from San Francisco Bay, including high chloride concentrations in groundwater, are evident in parts of the Niles Cone subbasin. Noble gas recharge temperatures indicate two primary recharge sources (Quarry Lakes and Alameda Creek) in the Niles Cone groundwater subbasin. Although recharge at Quarry Lakes affects hydraulic heads as far as the transition zone between the Niles Cone and East Bay Plain groundwater subbasins (about 5 miles), the effect of recharged water on water quality is only apparent in wells near (less than 2 miles) recharge sources. Groundwater chemistry from upper aquifer system wells near Quarry Lakes showed an evaporated signal (less negative oxygen and hydrogen isotopic values) relative to surrounding groundwater and a tritium concentration (2 tritium units) consistent with recently recharged water from a surface-water impoundment.Uncorrected carbon-14 activities measured in water sampled from wells in the Niles Cone groundwater subbasin range from 16 to 100 percent modern carbon (pmC). The geochemical reaction modeling software NETPATH was used to interpret carbon-14 ages along a flowpath from Quarry Lakes toward the East Bay Plain groundwater subbasin. Model results indicate that changes in groundwater chemistry are controlled by cation exchange on clay minerals and weathering of primary silicate minerals. Old groundwater (lower carbon-14 activities) is characterized by high dissolved silica and pH. Interpreted carbon-14 ages ranged from 830 to more than 7,000 years before present and are less than helium-4 ages that range from 2,000 to greater than 11,000 years before present. The average horizontal groundwater velocity along the studied flowpath, as calculated using interpreted carbon-14 ages, through the Deep aquifer of the Niles Cone groundwater subbasin is between 3 and 12 feet per year. The groundwater velocity decreases near the boundary of the transition zone to the southern East Bay Plain groundwater subbasin to about 0.5 feet per year. These changes may result from water recharged from different sources converging in flowpaths north of the transition zone, or a boundary to flow between the Niles Cone and southern East Bay Plain groundwater subbasins, likely owing to changes in lithology caused by depositional patterns.

Zarzalejo granite (Spain). A nomination for 'Global Heritage Stone Resource'

NASA Astrophysics Data System (ADS)

Freire Lista, David Martin; Fort, Rafael; José Varas-Muriel, María

2015-04-01

Zarzalejo granite is quarried in the Sierra de Guadarrama (Spanish Central System) foothills, in and around Zarzalejo village, in the province of Madrid, Spain. It is an inequigranular monzogranite medium-to-coarse grained, with a slight porphyritic texture (feldspar phenocrysts) and mafic micro-grained enclaves. In this abstract the candidacy of Zarzalejo granite as a "Global Heritage Resource Stone" (GHSR) is presented. This stone ideally fits the newly proposed designation as it has been used in many heritage buildings and its good petrophysical properties and durability have allowed well preserved constructions such as a Roman road, San Pedro Church in Zarzalejo (1492), Descalzas Reales Monastery in Madrid (1559-1564) and the San Lorenzo del Escorial Royal Monastery (1563-1584), to be declared a World Heritage Site by UNESCO. This level of construction has been a landmark in the extraction and proliferation of historic quarries created due to the high demand that such colossal monuments and buildings with granite, have required for their construction. In the mid-20th century, More, Zarzalejo granite has also been used in restoration works including the Royal Palace and the Reina Sofía Museum (2001-2005), both buildings in Madrid, Spain. Extraction of granite ashlars from tors has been a very frequent activity in the Zarzalejo neighbourhood until mid-twentieth century. So there is also a need to preserve these historic quarries. This type of stone has created a landscape that has been preserved as an open-air museum today where you can see the marks left in the granite due to historic quarry operations. The granite industry has been one of the main pillars of the Zarzalejo regional economy. For centuries, the local community have been engaged in quarrying and have created a cultural landscape based on its building stone. A quarryman monument has been erected in Zarzalejo in honor of this traditional craft as well as an architecture museum at San Lorenzo del Escorial Monastery, which shows the building material used during its construction. There is currently an active quarry of this dimension stone which continues to be sold under the commercial name of "Gris Escorial". Zarzalejo granite is mainly exported to Turkey, Italy and Saudi Arabia. Today this stone is used primarily in flooring. Other uses include cobblestones, funeral art, and building and monument restoration and rehabilitation. Sculptures have also built in recent years, notably the great monoliths in Salvador Dalí Square (1989) in Madrid. There are also small historic family-run quarries intermittently continuing this dimension stone carving tradition. Given its characteristics, Zarzalejo granite meets the requisites proposed to be nominated as a GHSR. This nomination will contribute to raising awareness and disseminate key aspects for conservation and thus ensure its use as a replacement stone in restoring heritage buildings where it was used as a building stone. Acknowledgements This study was funded by the Community of Madrid under the GEOMATERIALS 2 project (S2013/MIT-2914). The authors are members of the Complutense University of Madrid's Research Group: "Alteración y Conservación de los Materiales Pétreos del Patrimonio" (ref. 921349).

Specification aggregate quarry expansion: a case study demonstrating sustainable management of natural aggregate resources

USGS Publications Warehouse

Langer, William H.; Tucker, M.L.

2003-01-01

Many countries, provinces, territories, or states in the European Union, Australia, Canada, the United States, and elsewhere have begun implementing sustainability programs, but most of those programs stop short of sustainable management of aggregate resources. Sustainable practices do not always have to be conducted under the title of sustainability. This case study describes how Lafarge, a large multinational construction materials supplier, implemented the principles of sustainability even though there was an absence of existing local government policies or procedures addressing sustainable resource management. Jefferson County, Colorado, USA, is one of three counties in the six-county Denver, Colorado, region that has potentially available sources of crushed stone. Crushed stone comprises 30 percent of the aggregate produced in the area and plays a major role in regional aggregate resource needs. Jefferson County is home to four of the five crushed stone operations in the Denver region. Lafarge operates one of those four quarries. Lafarge recently proposed to expand its reserves by exchanging company-owned land for existing dedicated open space land adjacent to their quarry but owned by Jefferson County. A similar proposal submitted about 10 years earlier had been denied. Contrary to the earlier proposal, which was predicated on public relations, the new proposal was predicated on public trust. Although not explicitly managed under the moniker of sustainability, Lafarge used basic management principles that embody the tenets of sustainability. To achieve the goals of sustainable aggregate management where no governmental policies existed, Lafarge not only assumed their role of being a responsible corporate and environmental member of the community, but also assumed the role of facilitator to encourage and enable other stakeholders to responsibly resolve legitimate concerns regarding the Lafarge quarry proposal. Lafarge successfully presented an enlightened proposal where the county will gain 745 acres of new open space land in exchange for 60 acres of current open space land adjacent to the quarry. The process involved collaborative efforts by all stakeholders and resulted in an outcome that balances the needs of society, the environment, and business.

High resolution seismic tomography imaging of Ireland with quarry blast data

NASA Astrophysics Data System (ADS)

Arroucau, P.; Lebedev, S.; Bean, C. J.; Grannell, J.

2017-12-01

Local earthquake tomography is a well established tool to image geological structure at depth. That technique, however, is difficult to apply in slowly deforming regions, where local earthquakes are typically rare and of small magnitude, resulting in sparse data sampling. The natural earthquake seismicity of Ireland is very low. That due to quarry and mining blasts, on the other hand, is high and homogeneously distributed. As a consequence, and thanks to the dense and nearly uniform coverage achieved in the past ten years by temporary and permanent broadband seismological stations, the quarry blasts offer an alternative approach for high resolution seismic imaging of the crust and uppermost mantle beneath Ireland. We detected about 1,500 quarry blasts in Ireland and Northern Ireland between 2011 and 2014, for which we manually picked more than 15,000 P- and 20,000 S-wave first arrival times. The anthropogenic, explosive origin of those events was unambiguously assessed based on location, occurrence time and waveform characteristics. Here, we present a preliminary 3D tomographic model obtained from the inversion of 3,800 P-wave arrival times associated with a subset of 500 events observed in 2011, using FMTOMO tomographic code. Forward modeling is performed with the Fast Marching Method (FMM) and the inverse problem is solved iteratively using a gradient-based subspace inversion scheme after careful selection of damping and smoothing regularization parameters. The results illuminate the geological structure of Ireland from deposit to crustal scale in unprecedented detail, as demonstrated by sensitivity analysis, source relocation with the 3D velocity model and comparisons with surface geology.

Assessing the role of coastal characteristics in erosional process of rocky shores by boulder quarrying.

NASA Astrophysics Data System (ADS)

Causon Deguara, Joanna; Gauci, Ritienne

2017-04-01

Rocky coasts are considered as relatively stable coastlines, subject to erosional processes that change the landscape over long periods of time. Block quarrying is one such process, occurring when hydraulic pressure from wave impact dislodges boulders from within the outcropping bedrock. These dislodged boulders can be either deposited inland or dragged seaward by further wave action. This process can be evidenced from boulder deposits on the coast, as well as sockets and detachment scarps that are identified at the shoreline and in the backshore. This study seeks to identify the role of attributes such as aspect, geological structure and water depth have on erosion of rocky coasts through boulder quarrying processes. This is being done through observation of coastline morphology and an analysis of boulder accumulations and erosional features identified on a 3km stretch of rocky shore. The study area is situated on the SE coast of the Island of Malta (Central Mediterranean). The coastline being analysed generally trends NW - SE and consists of a series of limestone beds that dip slightly towards the NE. The boulder deposits observed along the site vary in size, quantity and position with respect to the shoreline. Whilst some areas exhibit large boulder accumulations, other areas are distinguished by the complete absence of such deposits. Taking into consideration the wave climate, the variable size, quantity and distribution of boulder accumulations observed along the site may indicate that geological structure and aspect play an important role in boulder dislodgment by wave action. Key words: rock coast, boulder quarrying, erosional process, Malta

Aging and Curing Temperature Effects on Compressive Strength of Mortar Containing Lime Stone Quarry Dust and Industrial Granite Sludge.

PubMed

Amin, Muhammad Nasir; Khan, Kaffayatullah; Saleem, Muhammad Umair; Khurram, Nauman; Niazi, Muhammad Umar Khan

2017-06-11

In this study, the researchers investigated the potential use of locally available waste materials from the lime stone quarry and the granite industry as a partial replacement of cement. Quarry sites and granite industry in the eastern province of Saudi Arabia produces tons of powder wastes in the form of quarry dust (QD) and granite sludge (GS), respectively, causing serious environmental problems along with frequent dust storms in the area. According to ASTM C109, identical 50-mm3 specimens were cast throughout this study to evaluate the compressive strength development of mortars (7, 28 and 91 days) containing these waste materials. Experimental variables included different percentage replacement of cement with waste materials (GS, QD), fineness of GS, various curing temperatures (20, 40 and 60 °C as local normal and hot environmental temperatures) and curing moisture (continuously moist and partially moist followed by air curing). Finally, the results of mortar containing waste materials were compared to corresponding results of control mortar (CM) and mortar containing fly ash (FA). The test results indicated that under normal curing (20 °C, moist cured), the compressive strength of mortar containing the different percentage of waste materials (QD, GS, FA and their combinations) remained lower than that of CM at all ages. However, the compressive strength of mortar containing waste materials slightly increased with increased fineness of GS and significantly increased under high curing temperatures. It was recommended that more fineness of GS be achieved to use its high percentage replacement with cement (30% or more) incorporating local environmental conditions.

Aging and Curing Temperature Effects on Compressive Strength of Mortar Containing Lime Stone Quarry Dust and Industrial Granite Sludge

PubMed Central

Amin, Muhammad Nasir; Khan, Kaffayatullah; Saleem, Muhammad Umair; Khurram, Nauman; Niazi, Muhammad Umar Khan

2017-01-01

In this study, the researchers investigated the potential use of locally available waste materials from the lime stone quarry and the granite industry as a partial replacement of cement. Quarry sites and granite industry in the eastern province of Saudi Arabia produces tons of powder wastes in the form of quarry dust (QD) and granite sludge (GS), respectively, causing serious environmental problems along with frequent dust storms in the area. According to ASTM C109, identical 50-mm3 specimens were cast throughout this study to evaluate the compressive strength development of mortars (7, 28 and 91 days) containing these waste materials. Experimental variables included different percentage replacement of cement with waste materials (GS, QD), fineness of GS, various curing temperatures (20, 40 and 60 °C as local normal and hot environmental temperatures) and curing moisture (continuously moist and partially moist followed by air curing). Finally, the results of mortar containing waste materials were compared to corresponding results of control mortar (CM) and mortar containing fly ash (FA). The test results indicated that under normal curing (20 °C, moist cured), the compressive strength of mortar containing the different percentage of waste materials (QD, GS, FA and their combinations) remained lower than that of CM at all ages. However, the compressive strength of mortar containing waste materials slightly increased with increased fineness of GS and significantly increased under high curing temperatures. It was recommended that more fineness of GS be achieved to use its high percentage replacement with cement (30% or more) incorporating local environmental conditions. PMID:28772999

Investigation of intact rock geomechanical parameters' effects on commercial blocks' productivity within stone reserves: A case history of some quarries in Isfahan, Iran

NASA Astrophysics Data System (ADS)

Yarahmadi, Reza; Bagherpour, Raheb; Tabaei, Morteza; Sousa, Luis M. O.

2017-10-01

One of the common methods to determine commercial blocks productivity (CBP) in reserves of dimension stone is through the study of the discontinuities' network. However, this determination remains a difficult task due to geographical heterogeneity and lack of access to all reserves' formations. This study presents a new method based on various geomechanical tests performed on intact rocks that assessed the CBP of a dimension stones' rock mass. Assuming that a dimension stone's rock mass comprised a large block of an intact rock, due to tectonics, the geomechanical properties of this block had direct effects on the discontinuities created within it. Therefore, the geomechanical properties of the intact rock may be related to the CBP of a stone reserve. Based on this factor, this study explored the relationship among some geomechanical properties, including failure angle, uniaxial compressive strength, and modulus of elasticity, and CBP by using data acquired from 21 dimension stone quarries consisting of travertine, marble, and onyx groups. According to the results obtained from the analysis of the Isfahan province's Iranian quarries, failure angle was not highly related to the reserve's CBP. In marble quarries, CBP may decrease, if the compressive strength of an intact rock exceeds 60 MPa. Among the studied parameters, the saturated-to-dry ratio's modulus of elasticity had the greatest relationship to the CBP. Generally, the presented diagrams displayed that the correlation between geomechanical properties and the CBP were an appropriate guide in determining the potential cost-effectiveness of a accessing a particular rock reserve during the early exploration phase.

Role of transient water pressure in quarrying: A subglacial experiment using acoustic emissions

USGS Publications Warehouse

Cohen, D.; Hooyer, T.S.; Iverson, N.R.; Thomason, J.F.; Jackson, M.

2006-01-01

Probably the most important mechanism of glacial erosion is quarrying: the growth and coalescence of cracks in subglacial bedrock and dislodgement of resultant rock fragments. Although evidence indicates that erosion rates depend on sliding speed, rates of crack growth in bedrock may be enhanced by changing stresses on the bed caused by fluctuating basal water pressure in zones of ice-bed separation. To study quarrying in real time, a granite step, 12 cm high with a crack in its stoss surface, was installed at the bed of Engabreen, Norway. Acoustic emission sensors monitored crack growth events in the step as ice slid over it. Vertical stresses, water pressure, and cavity height in the lee of the step were also measured. Water was pumped to the lee of the step several times over 8 days. Pumping initially caused opening of a leeward cavity, which then closed after pumping was stopped and water pressure decreased. During cavity closure, acoustic emissions emanating mostly from the vicinity of the base of the crack in the step increased dramatically. With repeated pump tests this crack grew with time until the step's lee surface was quarried. Our experiments indicate that fluctuating water pressure caused stress thresholds required for crack growth to be exceeded. Natural basal water pressure fluctuations should also concentrate stresses on rock steps, increasing rates of crack growth. Stress changes on the bed due to water pressure fluctuations will increase in magnitude and duration with cavity size, which may help explain the effect of sliding speed on erosion rates. Copyright 2006 by the American Geophysical Union.

Minimising Backbreak at the Dewan Cement Limestone Quarry Using an Artificial Neural Network

NASA Astrophysics Data System (ADS)

Muhammad, Khan; Shah, Akram

2017-12-01

Backbreak, defined as excessive breakage behind the last row of blastholes in blasting operations at a quarry, causes destabilisation of rock slopes, improper fragmentation, minimises drilling efficiency. In this paper an artificial neural network (ANN) is applied to predict backbreak, using 12 input parameters representing various controllable factors, such as the characteristics of explosives and geometrical blast design, at the Dewan Cement limestone quarry in Hattar, Pakistan. This ANN was trained with several model architectures. The 12-2-1 ANN model was selected as the simplest model yielding the best result, with a reported correlation coefficient of 0.98 and 0.97 in the training and validation phases, respectively. Sensitivity analysis of the model suggested that backbreak can be reduced most effectively by reducing powder factor, blasthole inclination, and burden. Field tests were subsequently carried out in which these sensitive parameters were varied accordingly; as a result, backbreak was controlled and reduced from 8 m to less than a metre. The resulting reduction in powder factor (kg of explosives used per m3 of blasted material) also reduced blasting costs.

Natural versus anthropogenic genesis of mardels (closed depressions) on the Gutland plateau (Luxembourg); archaeometrical and palynological evidence of Roman clay excavation from mardels.

NASA Astrophysics Data System (ADS)

van Mourik, Jan; Braekmans, Dennis; Doorenbosch, Marieke; Kuijper, Wim; van der Plicht, Hans

2016-04-01

Mardels, small closed depressions, are distinctive landforms on the Luxembourger Gutland plateau. In the present landscape most mardels are shallow fens, filled with colluvial sediments. The genesis of mardels has been studied intensively, inside and outside Luxembourg. Some researchers suggested a natural development and consider mardels as subsidence basins due to subsurface solution of gypsum veins, other researchers suggested cultural causes and consider mardels as prehistorical quarries. In the Gutland, mardels occur on various substrates. Mardels on the Strassen marls (li3) are abandoned quarries, related to clay excavation in Roman Time. Mardels on the Luxembourger sandstone (li2) are sinkholes, related to joint patterns in the sandstone formation. Mardels on the Keuper marls (km1,3) are originally subsidence basins, related to subsurface dissolutions of gypsum lenses and veins, filled with colluvial clay. The results of pollen analysis and archaeometrical tests demonstrate Roman extraction of clay for the production of ancient ceramics. So, the natural depressions have been enlarged to the present mardels. After excavation, the sedimentation of colluvium restarted in the abandoned quarries.

Analysis of conditions and the concept of multidirectional revitalization of the dolomite quarry in Siewierz

NASA Astrophysics Data System (ADS)

Pawełczyk, Katarzyna

2018-01-01

The development of mining of rock raw materials in Poland has significantly contributed to economic growth and the quality of life of local communities. However, mining activity, besides a number of positive effects, also implies broadly understood changes in the environment and the formation of brownfields. Reclamation and redevelopment of post-industrial areas, and especially post-mining areas, is currently a huge environmental and socio-economic challenge. Revitalization of post-mining areas is particularly important for small towns and municipalities, where mining was one of the main pillars of development and prosperity. An example of such a municipality is Siewierz in Silesian Voivodship. In the paper analysis the conditions have been conducted and the concept of revitalization of dolomite quarry Górnicze Zakłady Dolomitowe S.A. has been proposed. The AHP method has been used to analyse and select the optimal method of revitalization. As a result of the analysis, the concept of multidirectional revitalization with socially, economically and environmentally beneficial functions has been created, maximizing the potential of the quarry.

Mines, Quarries and Landscape. Visuality and Transformation

NASA Astrophysics Data System (ADS)

Jimeno, Carlos López; Torrijos, Ignacio Díez; González, Carmen Mataix

2016-06-01

In this paper a review of two basic concepts is carried out: scenery and landscape integration, proposing a new concept: "visuality", alternative to the classical "visibility" used in landscape studies related to mining activity, which explores the qualitative aspects that define the visual relationships between observer and environment. In relation to landscape integration studies, some reflections on substantive issues are made which induce certain prejudices at the time of addressing the issue of mining operations landscape integration, and some guidance and integration strategies are formulated. In the second part of the text, a new approach to the landscape integration of mines and quarries is raised, closely linked to the concept of visuality which are based on a basic goal: the re-qualification of the place, and give innovative answers to re-qualify the place and show how to catch the opportunity in the deep transformation generated by the development of mining activities. As a conclusion, a case study is presented in the last section, the landscape integration study conducted on marble exploitations Coto Pinos (Alicante, Spain), considered the largest ornamental rock quarry in Europe.

ESR spectroscopy as a tool for identifying joining fragments of antique marbles: the example of a pulpit by Donatello and Michelozzo.

PubMed

Attanasio, D; Platania, R

2000-06-01

ESR spectroscopy is one of the physicochemical techniques used to characterize archaeological white marbles and obtain information about their quarries of provenance. This is done by measuring selected spectral features of the Mn(2+) impurity ubiquitously present in marbles and developing a statistical classification rule from the variable vectors measured for a significant number of samples of known provenance (the quarry database). Now we show that the overall variability exhibited by the same spectroscopic features decreases rapidly with the linear dimensions of the sampled block and can be used to distinguish fragments belonging to the same piece of stone from those simply originating from the same quarry. Application of the method to the seven marble panels of the Donatello pulpit in Prato (Tuscany) shows that they have all been cut from the same single block and their different degradation must be ascribed to differential weathering and to the different conservation treatments undergone in the past. The limits and possible drawbacks of the method are also discussed. Copyright 2000 Academic Press.

Use of a Combination of Vertical and Horizontal Boreholes in Massive Blasting of Benches in the Surface Quarry Rodež

NASA Astrophysics Data System (ADS)

Tori, Matija; Vajović, Stanojle; Goleš, Niko; Muhić, Elvir; Peternel, Miha

2017-12-01

This article deals with the extraction of minerals (limestone/marl/flysch) in the quarry Rodež, which is located in western Slovenia. During the extraction of minerals in a quarry, drilling and blasting of benches are used. The focus of the article is on the analysis of the parameters related to drilling and blasting in surface excavations when using a combination of explosions and introducing horizontal wells along with vertical holes in the bench. On the basis of the analysis of basic parameters through a combination of drilling horizontal wells and charging those with the ammonal + Anfex explosive, analyses of effects of seismic disturbances on potentially affected buildings have also been conducted. The article is connected to and deals exclusively with the basic parameters of drilling and blasting, with the introduction of horizontal drilling and with the analysis of seismic measurements of threatened buildings in accordance with the German standard German Institute for Standardisation (DIN) 4150 during the use of a new method of blasting.

Suitability of bedrock for construction stone in the Greenville 1° by 2° Quadrangle, South Carolina, Georgia, and North Carolina

USGS Publications Warehouse

D'Agostino, John P.; Horton, J. Wright; Nelson, Arthur E.; Clarke, James W.

1993-01-01

This map presents a qualitative regional assessment of the resource potential of bedrock for use as construction stone the the Greenville 1° by 2° quadrangle. Other studies will include metallic minerals (D'Agostine and others, in press a), gold (D'Agostino an others, in press b), and non-metallic commodities (D'Agostino and others, in press c). Construction stone, as used here in the context of bedrock suitability, refers mainly to dimension stone and crushed stone. Abundant supplies of bedrock and alluvial sand and gravel are available from numerous sources in the quadrangle. There is a modern quarry industry with 176 active and inactive quarries situated in the quadrangle--153 in Georgia, 23 in South Carolina, and one in North Carolina. Sixty-five dimension-stone quarries are located in a single granite mass, the Elberton Granite, in Elbert, Madison, and Oglethorpe Counties, Ga. There are numerous undeveloped sources of moderate amounts of stream sand and gravel and major abundant upland residual clay deposits in the quadrangle area.

EPR, SEM and XRD investigation of ornamental limestone and marbles from some renowned Romanian quarries.

NASA Astrophysics Data System (ADS)

Covaci, D.; Costea, C.; Dumitras, D.; Duliu, O. G.

2012-04-01

Ornamental limestone and marble samples were collected and analysed by means of Electron Paramagnetic Resonance (EPR), Scanning Electron Microscopy (SEM) and X-Ray Diffraction (XRD), in order to evidence any systematic peculiarities able to be used in further provenance studies as well as to get more detailed information regarding geochemistry and mineralogy of three of the most important deposits from Romania. In this respect, 20 samples of limestone (Arnota quarry, Capatani Mountains and Mateias South quarry, Iezer Mountains) and 9 of calci-dolomitic marble (Porumbacu de Sus quarry, Fagaras Mountains) were collected over a significant sampling area. EPR spectroscopy, primarily used to asset the degree of homogeneity of considered samples, evidenced, for both Arnota and Mateias South limestone, the presence of a typical six hyperfine lines spectrum of Mn2+ ions in calcite but no traces of Fe ferromagnetic clusters. A more careful investigation has showed that although within the same quarry, there were no significant differences regarding EPR spectra, the resonance lines were systematic narrower in the case of Mateias South samples which suggested a lower content of divalent manganese ions. The Porumbacu calci-dolomitic marble, presented a more intricate Mn2+ spectrum, consisting of a superposition of typical dolomitic and calcitic spectra. Again, the EPR spectra were almost identical, attesting, as in the previous cases, a relative uniform distribution of paramagnetic Mn2+ ions within quarry. In the case of SEM, scattered, back scattered and absorbed electron modes were used to visualise the mineral formations on the sample surfaces while an EDAX quantitative analysis was used to determine the content of the most abundant elements. Although, at a first inspection, both groups of limestone looked almost similar, displaying a great variety of randomly orientated micro-crystalline agglomeration, only in the case of Arnota samples, we have noticed the presence of some micron size graphite inclusions, potential proxies for further provenance studies. The Porumbacu South marble showed a different pattern, characterized by a more uniform crystallite distribution, all of them presenting almost perfect cleaving surfaces. EDAX results evidenced, excepting the dominant Ca and Mg (the last one in the case of Porumbacu de Sus marble), the presence, in small quantities, of some other element such as Fe, Ni, Cu and Zn whose content represent also a good provenance proxy. XRD investigation evidenced not only of the dominant calcite and dolomite mineral phases, but also other minor mineral fraction, whose presence could be well related to the content of mentioned trace elements. Principal Component and Cluster Analysis, finally used to classify all investigated samples, allowed us to group them in three cluster in accordance with their provenance.

The region of the Piedra Berroqueña: A potencial Global Heritage Stone Province.

NASA Astrophysics Data System (ADS)

Freire-Lista, David Martin; Fort, Rafael

2015-04-01

The Piedra Berroqueña region occupies an area of approximately 4000 km2 in the Sierra de Guadarrama, Spanish Central System, the centre of the Iberian Peninsula. This region has provided most of the building granites used in Madrid and surrounding provinces. Traditional methods of cutting and carving stone have been preserved and it is easy to locate historic quarries in its landscape in addition to mechanized quarries with large reserves of this dimension stone that is exported worldwide in the form of blocks or slabs with different finishes. The Piedra Berroqueña has been used as a building stone since before the Romans. Petrophysical and durability characteristics have allowed to endure monuments as representative as The Royal Monastery of San Lorenzo del Escorial (1563-1584), del Sol Gate (1857-1862), Royal Palace (1738-1764), Alcalá Gate (1770-1778) or Prado Museum (1785-1808) in Madrid, Spain. Also the Piedra Berroqueña is part of most residential buildings and streets of this city, as well as modern buildings around the world, such as airport terminals in Athens, Cork, the British consulate in Hong Kong and headquarters of banks in Jakarta, among others. Piedra Berroqueña province is presented in this abstract, which has many granite quarries with common characteristics such as their grey tones and the presence of darker enclaves "Gabarros or negrones". In the Piedra Berroqueña province four main types of granite can be distinguish: Peraluminous granites; with biotite and occasional cordierite, whose most representative historic quarries are in Alpedrete, Colmenar Viejo, El Boalo, El Berrocal and Collado Mediano. Biotite granites with occasional amphibole are present in historic quarries in El Berrueco, Lozoyuela-Navas-Sieteiglesias and Pelayo de la Presa, among others. Currently exploited in Valdemanco and La Cabrera and marketed under the commercial names of Aurora Blanco, Blanco Berrocal, Crema Champagne, Blanco Castilla, Crema Cabrera, Blanco Perla, Crema Valdemanco. In Cadalso de los Vidrios it is marketed under the commercial name of Gris Cadalso and Rosa Cadalso. Biotite granites without cordierite or amphibole and the most representative historic quarries are in San Lorenzo del Escorial, Valdemorillo, Robledo de Chavela, Colmenar de Arroyo, Chapinería and Navas del Rey. In Zarzalejo is marketed under the commercial name of Gris Escorial. Leucogranites in Manzanares el Real, San Martín de Valdeiglesias or La Cabrera there are historical quarries. In the Cadalso de los Vidrios is exported under the commercial name Blanco Ártico, Blanco Cristal and Oro Cristal. The Piedra Berroqueña province meets the requirements proposed to be nominated for GHSP. This nomination will contribute to better understanding and dissemination of an area with attractive economic aspects that focuses on the use of its resources. Thus, the Piedra Berroqueña remains part of the heritage of the province, whether used as a replacement stone for restoration of heritage buildings or when used for new buildings. Acknowledgements This study was funded by the Community of Madrid under the GEOMATERIALS 2 project (S2013/MIT-2914). The authors are members of the Complutense University of Madrid's Research Group: "Alteración y Conservación de los Materiales Pétreos del Patrimonio" (ref. 921349).

The impact of human activities on the natural geoheritage and its effects on geodiversity. The case of the Italian karst areas.

NASA Astrophysics Data System (ADS)

Laureti, Lamberto

2017-04-01

In Italy the karst environments represent nearly half of the mountainous areas, with typical aspects characterized by a strong articulation of the relief, often induced by recent tectonic evolution, with closed depressions and plateaus, steep slopes, sharp interface soil-rocks and soil sediments inside the fissures and rock cavities. From the middle Holocene the human impact in the italian karst areas cleared the original extensive sclerophyllous forests in order to utilize space for grazing and agriculture, but favoured in this way the erosion of the soil cover and, in time, caused a nearly complete desertification of many mountain slopes. The forms of impact were and are represented by slope terracing for intensive agriculture, large use of fertilizer and pesticides, stocking of bio-masses of cattle, pigs and chickens in small areas, opening of quarries and mines, besides other interventions. Among all the forms of human impact, the mining and quarrying activities are responsible of high deterioration of the karst environment as a consequence of great rocks excavations and movements, together with metal polluted waters leaking. After the closure and the abandonment of the nearly all Italian metal mines, especially in Sardinia but also in the Alpine ore districts, the quarries excavation is really the main threat towards the Italian karst areas, because of the increase of the stony materials international market. By this regard, in this poster are showed the case studies referring to the Lombard Prealpine karst plateaus (where many interesting caves were destroyed) and to the karst systems of the Apuane Alps (Tuscany), where the quarries of the famous "Carrara marble" endangered the same great "Antro di Corchia", today preserved by the creation of a natural park.

Experimental study on the strength parameter of Quarry Dust mixed Coconut Shell Concrete adding Coconut Fibre

NASA Astrophysics Data System (ADS)

Matangulu Shrestha, Victor; Anandh, S.; Sindhu Nachiar, S.

2017-07-01

Concrete is a heterogeneous mixture constitute of cement as the main ingredient with a different mix of fine and coarse aggregate. The massive use of conventional concrete has a shortfall in its key ingredients, natural sand and coarse aggregate, due to increased industrialisation and globalisation. To overcome the shortage of material, an alternate material with similar mechanical properties and composition has to be studied, as replacement of conventional concrete. Coconut shell concrete is a prime option as replacement of key ingredients of conventional concrete as coconut is produced in massive quantity in south East Asia. Coconut shell concrete is lightweight concrete and different research is still ongoing concerning about its mix design and composition in the construction industry. Concrete is weak in tension as compared to compression, hence the fibre is used to refrain the crack in the concrete. Coconut fibre is one of many fibres which can be used in concrete. The main aim of this project is to analyse the use of natural by-products in the construction industry, make light weight concrete and eco-friendly construction. This project concerns with the comparison of the mechanical properties of coconut shell concrete and conventional concrete, replacing fine aggregate with quarry dust using coconut fibre. M25 grade of concrete was adopted and testing of concrete was done at the age of 3, 7 and 28 days. In this concrete mix, sand was replaced completely in volumetric measurement by quarry dust. The result was analysed and compared with addition of coconut fibre at varying percentage of 1%, 2%, 3%, 4% and 5%. From the test conducted, coconut shell concrete with quarry dust has the maximum value at 4% of coconut fibre while conventional concrete showed the maximum value at 2% of coconut fibre.

Assessment of occupational exposure in a granite quarry and processing factory.

PubMed

Tejado, J J; Guillén, J; Baeza, A

2016-09-01

Workers in the granite industry face an occupational hazard: silicosis due to the crystalline silica present in inhalable dust. As granite can also present a variable, and occasionally significant, content of naturally occurring radionuclides, they may also face a radiological hazard. In order to assess the risk, a granite industry with a quarry and processing factory was selected to assess the occupational exposure. Three main potential pathways were observed: external irradiation, inhalation of granite dust, and radon exposure. The external dose rate was similar to that in a nearby farming area. A slight increment (0.016-0.076 mSv yr -1 ) was observed in the quarry and stockpile, due to quarry faces and granite blocks. The effective dose due to granite dust inhalation was 0.182  ±  0.009 mSv yr -1 in the worst case scenario (3 mg m -3 dust load in air and no use of filter masks). Thus, the mean value of the effective dose from these two pathways was 0.26 mSv yr -1 , lower than the reference level of 1 mSv yr -1 for the general population. The annual mean value of radon concentration in the indoor air was 33 Bq m -3 . However, during granite processing works the radon concentration can increase up to 216 Bq m -3 , due to mechanical operations (sawing, polishing, sanding, etc). This radon concentration was below the 600 Bq m -3 reference level for action in working places. Therefore, workers in this granite factory face no significant additional radiological exposure, and no-one needs to be designated as occupationally exposed and subject to individual dosimetry.

Archaeological investigations on the Buckboard Mesa Road Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amick, D.S.; Henton, G.H.; Pippin, L.C.

1991-10-01

In 1986, the Desert Research Institute (DRI) conducted an archaeological reconnaissance of a new alignment for the Buckboard Mesa Road on the Nevada Test Site for the Department of Energy (DOE). During this reconnaissance, several archaeological sites of National Register quality were discovered and recorded including a large quarry, site 26Ny4892, and a smaller lithic scatter, site 26Ny4894. Analysis of the debitage at 26Ny4892 indicates that this area was used primarily as a quarry for relatively small cobbles of obsidian found in the alluvium. Lithic reduction techniques used here are designed for efficiently reducing small pieces of toolstone and aremore » oriented towards producing flake blanks from small cores and bifacially reducing exhausted cores. Projectile point cross references indicate that the area has seen at least casual use for about 10,000 years and more sustained use for the last 3,000 years. Initial obsidian hydration measurements indicate sustained use of the quarry for about the last 3,000 years although the loci of activities appear to change over time. Based on this study, the DRI recommends that quarrying activities in the area of 26Ny4892 are sufficiently sampled and that additional investigations into that aspect of prehistoric activity in the area are not necessary. This does not apply to other aspects of prehistoric use. DRI recommends that preconstruction surveys continue to identify nonquarrying, prehistoric utilization of the area. With the increased traffic on the Buckboard Mesa Road, there is a greater potential for vandalism to sites of National Register-quality located near the road. The DRI recommends that during the orientation briefing the workers at the Test Site be educated about the importance of cultural resources and the need for their protection. 202 refs., 41 figs., 52 tabs.« less

Selection of site specific vibration equation by using analytic hierarchy process in a quarry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kalayci, Ulku, E-mail: ukalayci@istanbul.edu.tr; Ozer, Umit, E-mail: uozer@istanbul.edu.tr

This paper presents a new approach for the selection of the most accurate SSVA (Site Specific Vibration Attenuation) equation for blasting processes in a quarry located near settlements in Istanbul, Turkey. In this context, the SSVA equations obtained from the same study area in the literature were considered in terms of distance between the shot points and buildings and the amount of explosive charge. In this purpose, 11 different SSVA equations obtained from the study area in the past 12 years, forecasting capabilities according to designated new conditions, using 102 vibration records as test data obtained from the study areamore » was investigated. In this study, AHP (Analytic Hierarchy Process) was selected as an analysis method in order to determine the most accurate equation among 11 SSAV equations, and the parameters such as year, distance, charge, and r{sup 2} of the equations were used as criteria for AHP. Finally, the most appropriate equation was selected among the existing ones, and the process of selecting according to different target criteria was presented. Furthermore, it was noted that the forecasting results of the selected equation is more accurate than that formed using the test results. - Highlights: • The optimum Site Specific Vibration Attenuation equation for blasting in a quarry located near settlements was determined. • It is indicated that SSVA equations changing over the years don’t give always accurate estimates at changing conditions. • Selection of the blast induced SSVA equation was made using AHP. • Equation selection method was highlighted based on parameters such as charge, distance, and quarry geometry changes (year).« less

Occupational exposure due to naturally occurring radionuclide material in granite quarry industry.

PubMed

Ademola, J A

2012-02-01

The potential occupational exposure in granite quarry industry due to the presence of naturally occurring radioactive material (NORM) has been investigated. The activity concentrations of (40)K, (226)Ra and (232)Th were determined using gamma-ray spectroscopy method. The annual effective dose of workers through different exposure pathways was determined by model calculations. The total annual effective dose varied from 21.48 to 33.69 μSv y(-1). Inhalation dose contributes the highest to the total effective dose. The results obtained were much lower than the intervention exemption levels (1.0 mSv y(-1)) given in the International Commission on Radiological Protection Publication 82.

Radon-222 signatures of natural ventilation regimes in an underground quarry.

PubMed

Perrier, Frédéric; Richon, Patrick; Crouzeix, Catherine; Morat, Pierre; Le Mouël, Jean Louis

2004-01-01

Radon-222 activity concentration has been monitored since 1999 in an underground limestone quarry located in Vincennes, near Paris, France. It is homogeneous in summer, with an average value of 1700 Bq m(-3), and varies from 730 to 1450 Bq m(-3) in winter, indicating natural ventilation with a rate ranging from 0.5 to 2.4 x 10(-6) s(-1) (0.04-0.22 day(-1)). This hypothesis is supported by measurements in the vertical access pit where, in winter, a turbulent air current produces a stable radon profile, smoothly decreasing from 700 Bq m(-3) at 20 m depth to 300 Bq m(-3) at surface. In summer, a thermal stratification is maintained in the pit, but the radon-222 concentration jumps repeatedly between 100 and 2000 Bq m(-3). These jumps are due to atmospheric pressure pumping, which induces ventilation in the quarry at a rate of about 0.1 x 10(-6) s(-1) (0.009 day(-1)). Radon-222 monitoring thus provides a dynamical characterisation of ventilation regimes, which is important for the assessment of the long-term evolution of underground systems.

Prediction of blast-induced air overpressure: a hybrid AI-based predictive model.

PubMed

Jahed Armaghani, Danial; Hajihassani, Mohsen; Marto, Aminaton; Shirani Faradonbeh, Roohollah; Mohamad, Edy Tonnizam

2015-11-01

Blast operations in the vicinity of residential areas usually produce significant environmental problems which may cause severe damage to the nearby areas. Blast-induced air overpressure (AOp) is one of the most important environmental impacts of blast operations which needs to be predicted to minimize the potential risk of damage. This paper presents an artificial neural network (ANN) optimized by the imperialist competitive algorithm (ICA) for the prediction of AOp induced by quarry blasting. For this purpose, 95 blasting operations were precisely monitored in a granite quarry site in Malaysia and AOp values were recorded in each operation. Furthermore, the most influential parameters on AOp, including the maximum charge per delay and the distance between the blast-face and monitoring point, were measured and used to train the ICA-ANN model. Based on the generalized predictor equation and considering the measured data from the granite quarry site, a new empirical equation was developed to predict AOp. For comparison purposes, conventional ANN models were developed and compared with the ICA-ANN results. The results demonstrated that the proposed ICA-ANN model is able to predict blast-induced AOp more accurately than other presented techniques.

Sardinian basalt. An ancient georesource still en vougue

NASA Astrophysics Data System (ADS)

Careddu, Nicola; Grillo, Silvana Maria

2017-04-01

Commercially quarried Sardinian basalt was the result of extensive volcanic activity during the Pliocene and Pleistocene ages, following the opening of the Campidano plain and Tyrrhenian sea rift. Extensive areas of Sardinia have been modelled by large volumes of basalt and andesite rock. An example is provided by the 'Giare' tablelands and other large plateaus located in central Sardinia. Other basalt-rich areas exist in the Island. Sardinia is featured by a vast array of basalt monuments, dating back to the II-I millennium BC, bearing witness to the great workability, durability and resistance to weathering of the rock. The complex of circular defensive towers, known as "Su Nuraxi di Barumini" was included in the World Heritage List by Unesco in 1997. Basalt is currently produced locally to be used for architectural and ornamental purposes. It is obtained by quarrying stone deposits or mining huge boulders which are moved and sawn by means of mechanical machinery. Stone-working is carried out in plants located in various sites of the Island. The paper begins with an historical introduction and then focusses on the current state of the art of Sardinian basalt quarrying, processing and using. An analysis of the basalt market has been carried out.

Quarries as educational resources - a research with students of a secondary school of Portugal

NASA Astrophysics Data System (ADS)

Filipe, Fernanda; Henriques, Maria Helena

2015-04-01

This work describes the results obtained in a research on science education involving 18 students of Biology and Geology of the 10th grade (15 years old) of the Secondary School of Figueiró dos Vinhos (Central Portugal). Framed on the curricular topic "Earth, a very special planet", the research included the conception, implementation and evaluation of an educational intervention aiming to answer the question: "How to stimulate meaningful and relevant learning about sustainable exploitation of geological resources, namely limestone?" The intervention occurred along 8 classes of 90 minutes each, which included practical work developed in small groups (3 students/each), and several activities both in the field and in the classroom (prior and after the fieldtrip). From the methodological point of view, this research is qualitative in nature, a study-case type, with data resulting from direct observation and content analysis of the answers presented by students to questionnaires (diagnostic and intervention assessment) and to worksheets, expressly created for the research. The main goal of the intervention was that the students, by developing practical activities centered upon a field trip to an abandoned limestone quarry located close to their homes, could learn to recognize the geological impacts arising from the exploitation of geological resources and acquire skills for collecting and processing relevant information about existing rules that control the operations in quarries, in order to develop critical thinking about the nature of exploitation of these types of resources, which may hinder the promotion of sustainable development. Concerning the intervention assessment, results reinforced the idea that quarries can provide an educational resource of great value for promoting substantive knowledge on geosciences, urgently needed and consistent with the development of critical and intervenient citizens, able to decide, at the right moment, how to behave responsibly and actively in the society. Moreover, the results show that the strategies adopted appear to have contributed to encourage the development of students' skills, particularly in terms of knowledge, reasoning, communication and adoption of individual and collective attitudes and behaviors consistent with the promotion of sustainable development. Both educational strategies and resources implemented for this specific project can inspire other initiatives for other classes and schools located near to quarries, thus increasing among citizens meaningful and relevant knowledge on geosciences.

Hungarian travertine: a historic and current stone resource of Central Europe

NASA Astrophysics Data System (ADS)

Török, Ákos

2013-04-01

Travertine is a widespread dimension stone that was used worldwide in monuments. The best known examples are known from the Roman Empire from Italy, where this porous stone belonged to one of the favourite stone types. Ancient quarries of Tivoli provided material to major construction works to Rome. Other occurrences belonging to the Roman Empire outside of Rome were also used by the Romans. Some of the most important European deposits are known from Hungary. Exploitable travertine layers are found at many places in Hungary but at least two major areas were actively quarried by the Romans. One major deposit was not far away from the provincial capital of Roman Pannonia - called Aquincum, which currently forms a part of Budapest, while the other even larger occurrence is at Süttő, at the riverside of Danube some 50 km NE from the past capital. River Danube provided an excellent pathway of transport ting stone to the capital. Evidences indicate that quarrying activity in Süttő area has already begun during the 1st century BC and the travertine has been exploited with some interruptions since then. The present day quarries form the parts of the largest active dimension quarry system of Hungary. The exposed very thick banks (3 to 4m) of travertine were deposited from lukewarm springs during the Pleistocene period. Various types of travertine were used for constructing Roman aqueducts, fortresses, amphitheatre until the 4th century AD and were also transported to other parts of that Roman Province which extended to the present territory of Hungary, Austria, Slovenia and Croatia. Although the use of travertine has significantly decreased after the fall of Roman Empire in Central Europe and in Hungary, the presence of this stone was also documented from numerous Gothic and Baroque buildings from the area. The use of this stone became more popular again in the Carpathian Basin, when major constructions of larger cities such as Bratislava, Vienna or Budapest accelerated in the Austro-Hungarian Monarchy at the second part of the 19th century. The paper also provides information on various lithotypes of travertine and it also presents data on the physical properties and examples of its use in the monuments located in the cities of Central Europe.

Long-range laser scanning and 3D imaging for the Gneiss quarries survey

NASA Astrophysics Data System (ADS)

Schenker, Filippo Luca; Spataro, Alessio; Pozzoni, Maurizio; Ambrosi, Christian; Cannata, Massimiliano; Günther, Felix; Corboud, Federico

2016-04-01

In Canton Ticino (Southern Switzerland), the exploitation of natural stone, mostly gneisses, is an important activity of valley's economies. Nowadays, these economic activities are menaced by (i) the exploitation costs related to geological phenomena such as fractures, faults and heterogeneous rocks that hinder the processing of the stone product, (ii) continuously changing demand because of the evolving natural stone fashion and (iii) increasing administrative limits and rules acting to protect the environment. Therefore, the sustainable development of the sector for the next decades needs new and effective strategies to regulate and plan the quarries. A fundamental step in this process is the building of a 3D geological model of the quarries to constrain the volume of commercial natural stone and the volume of waste. In this context, we conducted Terrestrial Laser Scanning surveys of the quarries in the Maggia Valley to obtain a detailed 3D topography onto which the geological units were mapped. The topographic 3D model was obtained with a long-range laser scanning Riegl VZ4000 that can measure from up to 4 km of distance with a speed of 147,000 points per second. It operates with the new V-line technology, which defines the surface relief by sensing differentiated signals (echoes), even in the presence of obstacles such as vegetation. Depending on the esthetics of the gneisses, we defined seven types of natural stones that, together with faults and joints, were mapped onto the 3D models of the exploitation sites. According to the orientation of the geological limits and structures, we projected the different rock units and fractures into the excavation front. This way, we obtained a 3D geological model from which we can quantitatively estimate the volume of the seven different natural stones (with different commercial value) and waste (with low commercial value). To verify the 3D geological models and to quantify exploited rock and waste volumes the same procedure will be repeated after ca. 6 months. Finally, these 3D geological models can be useful to (i) decrease the exploitation costs because they yield the extraction potential of quarry, (ii) become more efficient in the exploitation and more dynamic in the market because they permit better planning and (iii) decrease the waste by limiting the excavation in regions with low-quality rocks.

Fast evolving conduits in clay-bonded sandstone: Characterization, erosion processes and significance for the origin of sandstone landforms

NASA Astrophysics Data System (ADS)

Bruthans, Jiri; Svetlik, Daniel; Soukup, Jan; Schweigstillova, Jana; Valek, Jan; Sedlackova, Marketa; Mayo, Alan L.

2012-12-01

In Strelec Quarry, the Czech Republic, an underground conduit network > 300 m long with a volume of ~ 104 m3 and a catchment of 7 km2 developed over 5 years by groundwater flow in Cretaceous marine quartz sandstone. Similar landforms at natural exposures (conduits, slot canyons, undercuts) are stabilized by case hardening and have stopped evolving. The quarry offers a unique opportunity to study conduit evolution in sandstone at local to regional scales, from the initial stage to maturity, and to characterize the erosion processes which may form natural landforms prior to stabilization. A new technique was developed to distinguish erodible and non-erodible sandstone surfaces. Based on measurements of relative erodibility, drilling resistance, ambient and water-saturated tensile strength (TS) at natural and quarry exposures three distinct kinds of surfaces were found. 1) Erodible sandstone exposed at ~ 60% of surfaces in quarry. This sandstone loses as much as 99% of TS when saturated. 2) Sub-vertical fracture surfaces that are non-erodible already prior to exposure at ground surface and which keep considerable TS if saturated. 3) Case hardened surfaces that start to form after exposure. In favorable conditions they became non-erodible and reach the full TS in just 6 years. An increase in the hydraulic gradient from ~ 0.005 to > 0.02 triggered conduit evolution, based on long-term monitoring of water table in 18 wells and inflows to the quarry. Rapidly evolving major conduits are characterized by a channel gradient of ~ 0.01, a flow velocity ~ 40 cm/s and sediment concentration ~ 10 g/l. Flow in openings with a discharge 1 ml/s and hydraulic gradient > 0.05 exceeds the erosion threshold and initiates piping. In the first phase of conduit evolution, fast concentrated flow mobilizes erodible sandstone between sets of parallel fractures in the shallow phreatic zone. In the second phase the conduit opening mainly expands vertically upward into the vadose zone by mass wasting of undercut sandstone slabs. Mass wasting is responsible for > 90% of mobilized sandstone. Sides of the mature conduits are protected by non-erodible fracture surfaces. Natural landforms were probably formed very rapidly by overland flow, piping and possibly fluidization during or at the end of the glacial periods when sandstone was not yet protected by case hardening.

The "green stones" of Valtellina and Valchiavenna (central Alps, northern Italy)

NASA Astrophysics Data System (ADS)

Cavallo, Alessandro

2015-04-01

Valtellina and Val Chiavenna (Sondrio, Central Alps, northern Italy) are traditionally areas of production of building and ornamental stones (e.g. Serizzo Ghiandone, Serizzo Valmasino, San Fedelino Granite), and among these the "green stones" have a leading position. These stones had an extensive use in Lombardy, as well as abroad (e.g Switzerland). The "green stones" are related to the two mafic-ultramafic bodies of Valmalenco and Chiavenna, where the two largest quarrying districts of the Province of Sondrio are located. Until the early decades of the XX century, serpentinites (and other lithologies from Valtellina) were also extracted from the erratic boulders of Brianza (north of Milan), but at present time the law protects the few remaining boulders. The extracted and processed materials are various: serpentinites, ophicalcites, soapstones. Even the "Stone of Tresivio", used in the past in important monuments of Valtellina, could be classified among the "green stones" in a broad sense: it is a green chloritic schist with scarce and thin ferriferous calcitic veins, pertaining to the sedimentary "Servino" Formation. In recent times, the ancient quarries of this stone were rediscovered near the homonymous village, a few kilometers from Sondrio. There are also historic reports about other "green stones", used in ancient times, such as the "Stone of Grosio", a chloritic schist, and the "Bormio Prasinite". Currently the extraction and processing of "green stones" occurs mostly in Valmalenco, with 22 active serpentinite quarries and a gross volume of 70000 m3 extracted per year, with a yield of about 50%. The Malenco serpentinite (interpreted as sub-continental mantle rocks) forms a 1-2 km thick tabular body, outcropping over an area of about 170 km2, almost entirely confined within the boundaries of the valley. The antigoritic serpentinites (with variable amounts of olivine, clinopyroxene, chlorite and magnetite) are moderately up to strongly foliated, sometimes folded, and are processed in two main commercial varieties: schistose ("serpentinoscisto") and massive ("serpentino da taglio"). In Valmalenco, the extraction and processing of schistose serpentinites for the production of slabs ("piode", splitted by hand with hammer and chisel), used in roofing and flooring, dates back at least to the XIV century. From the traditional underground extraction, the quarrying activities moved to the modern open-cast extraction in the seventies. The renowned quality of the secular serpentinite roof coverings is related to the excellent physical and mechanical properties, especially the flexural strength (average values around 90-100 MPa), very low porosity and the thaw/freezing resistance. The "massive" serpentinite achieved a special place in the national and international market of ornamental stones: the several extracted varieties (Serpentino Classico, Verde Vittoria, Verde Perlato, Verde Mare, Verde Principe, Verde Torre S. Maria), in addition to the excellent technical properties (flexural strength and thermal properties) that promote specific uses, make these stones much appreciated worldwide (e.g. Bundestag in Berlin, Germany). As part of the "green stones" of Valmalenco, two currently abandoned ophicalcite quarries have been active in the recent past. The extraction and processing of soapstone ("pietra ollare" or "pietra laugera", a talc and/or chlorite rich ultramafic/mafic rock) in Valmalenco and Valchiavenna probably dates back to the Iron Age; in Valchiavenna it is documented with certainty since Roman times and the Middle Ages. The extraction and processing of soapstone peaked around the middle of the XVIII century, with a dozen quarries and about 300 workers involved, between Chiavenna and Piuro. A limited production of soapstone is still active in the municipalities of Piuro (talc-olivine-tremolite fels) and Chiesa in Valmalenco (chlorite schist), where in addition to the traditional cooking pots ("Lavecc"), there is a growing art work and gift items production. With the exception of two companies that have reached an industrial production level, the remaining 24 companies operating in Valmalenco are on an artisan level, and are grouped in the "Consorzio Artigiani Cavatori Valmalenco". The consortium, already engaged in the management of a permanent storage of explosives at the service of the quarries, promotes and subsidizes economically various initiatives aimed at the enhancement of stone products and the development of this craft. The consortium is a promoter of a cultural initiative aimed at the restoration of an underground quarry and the ancient paths of "Giovello", a historic site for the extraction and processing of serpentinite.

Kassite from the Diamond Jo quarry, Magnet Cove, Hot Spring County, Arkansas: the problem of cafetite and kassite.

USGS Publications Warehouse

Evans, H.T.; Dwornik, E.J.; Milton, C.

1986-01-01

Small (<0.5 mm), brownish-pink platy rosettes and yellow spherules, in cavities in nepheline syenite at the Diamond Jo quarry, Magnet Cove, have been identified as kassite, CaTi2O4(OH)2, a mineral previously known only from the Kola Peninsula, USSR. The X-ray powder and single-crystal data and density of the Magnet Cove kassite correspond with those reported by earlier workers for cafetite, (Ca,Mg)(Fe,Al)2Ti4O12.4H2O, from Kola, but the chemical and physical properties correspond with those given in their description of kassite.-J.A.Z.

Natural stones of historic and future importance in Sweden

NASA Astrophysics Data System (ADS)

Schouenborg, Björn; Andersson, Jenny; Göransson, Mattias

2013-04-01

Several activities and responsibilities of the Geological Survey of Sweden (SGU) are related to the work of the newly formed international Heritage Stone Task Group (HSTG) for designating historically important stones. SGU is among other things a referral organization, frequently dealing with the preparation of statements in connection with the quarrying permit applications of stone producers. When preparing these statements, SGU takes into account a number of parameters, e.g. the importance for local and regional business development, historic importance, area of occurrence, quality of the geological documentation of the stone type, peculiarities of the stone types and technical properties relevant for the intended use. Traditionally, SGU has not worked with bedrock mapping looking at the potential of natural stones production but more commonly looking at the potential production of aggregates, industrial minerals and metals. The competence is, therefore, presently being built up with new databases over important natural stone types and definition of criteria for their selection etc. In this respect the criteria defined by the HSTG provide important help. This work goes hand in hand with the task of proposing stone-deposits and quarries of "national interest". The criteria for selection of a stone type, quarry etc as one of national interest are currently being revised. SGU plays an important role in this work. However, the final decision and appointment lies in the hands of the Swedish Board of Housing, Building and Planning (Boverket), an authority dealing with sustainable land use and regional development, town and country planning. Boverket supervises how the planning legislation is handled by the municipal authorities and the county administrative boards. The two latter organizations are those in charge of giving extraction permits for stone quarrying. The "Hallandia gneiss", of SW Sweden, is described as a case story and presented in this paper. Keywords: Hallandia gneiss, natural stones, historic stones, urban planning and building

Sulfur and oxygen isotopic study of Paleozoic sediment-hosted Zn-Pb(-Ag-Au-Ba-F) deposits and associated hydrothermal alteration zones in the Nome Complex, Seward Peninsula, Alaska

USGS Publications Warehouse

Shanks, W.C. Pat; Slack, John F.; Till, Alison B.; Thurston, Roland; Gemery-Hill, Pamela

2014-01-01

The stratabound Nelson deposit, and the deformed veins at the Galena and Quarry deposits, may be older than the Aurora Creek-Christophosen and Wheeler North deposits. The Nelson deposit has a lower and narrower range of δ34S values (1.9 to 10.4‰), averaging about 8‰. The Galena and Quarry veins display δ34S values that are similar to those of the stratabound Nelson deposit. Barite samples from the Aurora Creek-Christophosen, Wheeler North, and Quarry deposits have 34S-enriched δ34S values between 25 and 30‰ that are consistent with derivation of the sulfur from coeval (Paleozoic) seawater sulfate. Given their δ34S values, it is likely that the Aurora Creek-Christophosen and Wheeler North deposits formed in closed sub-basins with euxinic conditions that led to extreme Rayleigh distillation to produce the very large range and very high δ34S values. The Nelson deposit probably formed within an anoxic but not euxinic sub-basin. At Nelson, sulfide was likely derived by a subsurface thermochemical sulfate reduction (TSR) reaction, similar to reactions that are inferred to have produced the sulfides in the Galena and Quarry deposits, which are interpreted as feeder veins for the stratabound deposits. Calculations of oxygen isotope temperatures are based on the assumption that evolved seawater with δ18O of 3‰ was the mineralizing and altering fluid related to the formation of the sulfide deposits. Temperatures of aluminous alteration and sulfide mineralization were between 109 and 209 °C, determined on the basis of oxygen isotope fractionations between the mineralizing fluid and proportionate amounts of quartz and muscovite in the rocks. These temperature estimates agree well with known temperatures of SEDEX mineralization worldwide. Sulfur isotope values also are generally consistent with the known ranges in SEDEX deposits worldwide (δ34S ≈ -5 to 25‰).

Stationary and transient thermal states of barometric pumping in the access pit of an underground quarry.

PubMed

Perrier, Frédéric; Le Mouël, Jean-Louis

2016-04-15

The transition zone between free and underground atmospheres hosts spectacular phenomena, as demonstrated by temperature measurements performed in the 4.6m diameter and 20m deep vertical access pit of an abandoned underground quarry located in Vincennes, near Paris. In summer, a stable stratification of the atmosphere is maintained, with coherent temperature variations associated with atmospheric pressure changes, with a barometric tide S2 larger than 0.1°C peak to peak. When the winter regime of turbulent cold air avalanches is initiated, stratification with pressure induced signals can be restored transiently in the upper part of the pit, while the lower part remains fully mixed and insensitive to pressure variations. The amplitude of the pressure to temperature transfer function increases with frequency below 5×10(-4)Hz, with values at 3×10(-5)Hz varying from 0.1°C·hPa(-1) at the bottom up to 2°C·hPa(-1) towards the top of the pit. These temperature variations are accounted for by cave breathing, which is pressure induced motion of air amplified by the large volume of the quarry. This understanding is supported by a numerical model including advective heat transport, heat diffusion, and heat exchange with the pit walls. Mean lifetime in the pit is of the order of 9 to 13h, and barometric pumping results in an effective ventilation rate of the quarry of the order of 10(-7)s(-1). This study illustrates the important role of barometric pumping in heat and matter transport between atmosphere and lithosphere. The resulting stationary and transient states, revealed in this pit, are probably a general feature of functioning interface systems, and therefore are an important aspect to consider in problems of contaminant transport, or the preservation of precious heritage such as rare ecosystems or painted caves. Copyright © 2016 Elsevier B.V. All rights reserved.

Influence of stratigraphic factors on the failure mechanisms of sinkholes related to man-made underground caves at Cutrofiano (South-Eastern Italy)

NASA Astrophysics Data System (ADS)

Lollino, Piernicola; Margiotta, Stefano; Parise, Mario

2013-04-01

An increasing number of areas in southern Italy are being interested by sinkholes related to the presence of man-made cavities, with underground quarries representing the more problematic typology of anthropogenic caves in terms of instability. The case of Cutrofiano (Apulia, SE Italy) is here presented as a representative case study. This territory is well known for the underground quarrying activity of soft calcarenitic rocks that caused in the last decades widespread phenomena of subsidence at the surface, with extensive damage and problems to the main communication routes in the area. A very complex and intricate network of subterranean galleries is present underground, for a total development on the order of several tens of kilometres. The Gravina Calcarenite Formation, that is the object of the underground quarries, consists of whitish calcarenite with an upper greenish clayey-sandy interval rich in fossils. This formation is overlain by grey sandy clays (Subapennine Clays) grading upward to fossil-rich sands (Brindisi Sands). In recent years, clay mining has been resumed at the ground surface, following the opening of a cement factory, and resulting in the realization of wide open-pit quarries. The local sedimentary sequence is closed by terraced calcarenite deposits, that holds a phreatic groundwater body. The results of detailed geological, geomorphological and geomechanical surveys, supported by laboratory tests, show that in the Cutrofiano area the thickness of the stratigraphical succession, the depth of the underground galleries, the structural conditions of the rock mass, and the failure mechanisms observed within the quarries are variable. The geological model reconstructed represents the base for the implementation of numerical simulations, which are aimed at defining the eventual mechanisms of rock failure, up to the formation of the sinkhole. Local changes in the stratigraphy are very common in the area, due to the overall slight attitude of the strata, dipping toward the SW, and to lateral variations in the geological succession. Thus, at least two different geological settings may be recognized: the first is typical of those areas closest to the town, where the calcarenite rock mass is at low depth, and appears to be covered by very thin deposits; in such a situation, the underground quarries develop at depths ranging from 7 to 10 meters below the ground surface. The second setting, which typically characterizes the sectors a few kilometres farther south, shows, on the other hand, the presence of thick cover of the clay-sandy intervals, and has the galleries of underground quarries located at depth variable from 15 to 45 m. Starting from these different situations, two-dimensional numerical analyses have been developed by using the finite element method to investigate the stress-strain evolution of the rock mass surrounding the galleries due to long-term degradation of the rock properties induced by weathering and water infiltration. The results obtained from the numerical simulations point out a quite different behaviour between the two geological settings, since the presence of the significant clay layer overlying the calcarenite substratum affects the geometry of the subsidence cone, and, consequently, the real extent of the likely sinkholes at the surface. These outcomes are of great importance to highlight the need to use detailed, site-specific, data in order to perform numerical modelling, and warn about the common habit of extending a small number of borehole data, tens of hundreds of meters apart, over large areas. Especially when carried out to define vulnerability and/or risk of specific elements at risk, the researches should be performed having available on-site data, or, alternatively, the end users should be properly warned in the use of the outcomes from the study.

Interpolity exchange of basalt tools facilitated via elite control in Hawaiian archaic states

PubMed Central

Kirch, Patrick V.; Mills, Peter R.; Lundblad, Steven P.; Sinton, John; Kahn, Jennifer G.

2012-01-01

Ethnohistoric accounts of late precontact Hawaiian archaic states emphasize the independence of chiefly controlled territories (ahupua‘a) based on an agricultural, staple economy. However, elite control of unevenly distributed resources, such as high-quality volcanic rock for adze production, may have provided an alternative source of economic power. To test this hypothesis we used nondestructive energy-dispersive X-ray fluorescence (ED-XRF) analysis of 328 lithic artifacts from 36 archaeological features in the Kahikinui district, Maui Island, to geochemically characterize the source groups. This process was followed by a limited sampling using destructive wavelength-dispersive X-ray fluorescence (WD-XRF) analysis to more precisely characterize certain nonlocal source groups. Seventeen geochemical groups were defined, eight of which represent extra-Maui Island sources. Although the majority of stone tools were derived from Maui Island sources (71%), a significant quantity (27%) of tools derived from extraisland sources, including the large Mauna Kea quarry on Hawai‘i Island as well as quarries on O‘ahu, Moloka‘i, and Lāna‘i islands. Importantly, tools quarried from extralocal sources are found in the highest frequency in elite residential features and in ritual contexts. These results suggest a significant role for a wealth economy based on the control and distribution of nonagricultural goods and resources during the rise of the Hawaiian archaic states. PMID:22203984

Improvement of cement plant dust emission by bag filter system

NASA Astrophysics Data System (ADS)

Wahyu Purnomo, Chandra; Budhijanto, Wiratni; Alfisyah, Muziibu; Triyono

2018-03-01

The limestone quarry in PT Indocement Tunggal Prakarsa (ITP) in Cirebon is considered as a complex quarry in terms of chemical composition and material hardness. From the beginning of the plant operation up to the end of 2015, the dust removal was rely on electrostatic precipitator (EP) system. Whenever limestone from specific quarry zones were incorporated into Raw Mill (RM) feed or there was an upset condition, the dust emission increased significantly. Beside higher demand of electricity, an EP system requires lower gas inlet temperature in order to remove the dust effectively which requires larger cooling water in the previous gas conditioning tower to cool down gas from 400 °C to about 100 °C. By considering the drawbacks, the EP system was replaced by a bag filter (BF) system. The BF allows higher temperature of gas inlet and it has higher dust removal efficiency. In this study, the efficiency of the two different dust removal systems is compared. The effect of process variables i.e. RM feed, kiln feed, inlet temperature and pressure, and small size particle fraction to the dust emission are studied by multivariate linier regression analysis. It is observed that the BF system can reduce significantly the dust emission from 30 to 6 mg/m3 and in the same time reducing CO2 emission by 0.24 ton/year from the electricity consumption saving.

Potential source for crushed granite aggregate in Heard County, Georgia

USGS Publications Warehouse

Atkins, R.L.; Higgins, Michael W.; Dickerson, Robert P.

1981-01-01

The production of crushed stone suitable for highway and general construction is a major industry in Georgia. The state ranks eighth in the nation in overall crushed stone production, and first in crushed granite production. Crushed stone production in Georgia in 1979 was 40,902,000 short tons worth $154,021,000 (D.H. White, Jr., US Bureau of Mines, personal commun., Aug. 1980). More than 3,000 people were employed by the crushed stone industry in Georgia during that year.Presently, the only active quarry in Heard County is located in an amphibolite. Amphibolite is not a conventional aggregate. It has a high specific gravity, a tendency to make elongate fragments, and varies considerably in abrasion tests.Because the nearest approved aggregate quarry is more than 25 miles from Franklin, the county seat, the purpose of this brief report is to describe a body of granite gneiss that may provide suitable aggregate for the crushed stone industry, potential quarry operators and various agencies in Heard County. This report is part of a project to study the geology and mineral resources of the Piedmont south of the Brevard Zone, and is not intended to supplant detailed site investigations by industry or consultants. The report is a joint effort between the Georgia Geologic Survey and the Office of Materials and Research of the Georgia Department of Transportation.

Surface wave inversion of central Texas quarry blasts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bonner, J.L.; Goforth, T.T.

1993-02-01

Compressional and shear wave models of the upper crust in central Texas were obtained by inverting Rayleigh and Love waves recorded at the new W.M. Keck Foundation Seismological Observatory at Baylor University. The Keck Observatory, which became operational in April 1992, consists of a three-component, broadband Geotech seismometer located at a depth of 130 feet in a borehole 17 miles from the Baylor campus. The field station is solar powered, and the 140-dB dynamic range digital data are transmitted to the Baylor analysis lab via radio, where they are analyzed and archived. Limestone quarries located in all directions from themore » Keck Observatory detonate two to four tons of explosives per blast several times a week. Recordings of these blasts show sharp onsets of P and S waves, as well as dispersed Rayleigh and Love waves in the period band 1 to 3 seconds. Multiple filter analysis and phase matched filtering techniques were used to obtain high quality dispersion curves for the surface waves, and inversion techniques were applied to produce shear velocity models of the upper crust. A rapid increase in shear velocity at a depth of about 1.5 km is associated with the Ouachita Overthrust Belt. Portable seismic recording systems were placed at the quarries to monitor start times and initial wave forms. These data were combined with the Keck recordings to produce attenuation and compressional velocity models.« less

The building stones of ancient Egypt a gift of its geology

NASA Astrophysics Data System (ADS)

Klemm, Dietrich D.; Klemm, Rosemarie

2001-08-01

Building stones and clay-rich Nile mud were ancient Egypt's main raw construction materials. While the mud was easily accessible along the Nile river valley, the immense quantities of the different stone materials used for construction of the famous pyramids, precious temples and tombs needed a systematic quarrying organization, well arranged transport logistics over extreme distances and a high standard of stone masonry. The petrography, occurrence, and main applications of the 11 most popular stone types used in ancient Egypt are described in this contribution. Rough estimates of the scale of this mining activity, based on the volume of many different ancient quarry sites, all over Egypt, reveal that the monuments known today represent only a small fraction of the amount of building stones mined during the long, ancient Egyptian history.

A new species of karst-adapted Cnemaspis Strauch, 1887 (Squamata: Gekkonidae) from a threatened karst region in Pahang, Peninsular Malaysia.

PubMed

Grismer, L Lee; Wood, Perry L; Mohamed, Maketab; Chan, Kin Onn; Heinz, Heather M; Sumarli, Alex S-I; Chan, Jacob A; Loredo, Ariel I

2013-12-12

A new species of karst-adapted gekkonid lizard of the genus Cnemaspis Strauch is described from Gua Gunting and Gua Goyang in a karst region of Merapoh, Pahang, Peninsular Malaysia whose unique limestone formations are in immediate danger of being quarried. The new species differs from all other species of Cnemaspis based on its unique suite of morphological and color pattern characters. Its discovery underscores the unique biodiversity endemic to karst regions and adds to a growing list of karst-adapted reptiles from Peninsular Malaysia. We posit that new karst-adapted species endemic to limestone forests will continue to be discovered and these regions will harbor a significant percentage of Peninsular Malaysia's biodiversity and thusly should be conserved rather than quarried.

Contribution in support of a Global Heritage Stone designation for the Leitha Limestone s.l. of eastern Austria because of its use in Roman times

NASA Astrophysics Data System (ADS)

Moshammer, Beatrix; Rohatsch, Andreas

2015-04-01

The Leitha Limestone s.l., which has been proposed for Global Heritage Stone listing, comprises the red algae dominated sediments of shallow water carbonate platforms distributed around the Leitha Mountains, the Ruster Hills and other parts of the Vienna Basin. In our sense it comprehends the Leithakalk faciostratotype of the Badenian regional stage along with its lateral equivalents of near shore calcareous sandstones, breccias and conglomerates. It also includes the so called detrital Leithakalk, an informal name for calcareous algae sandstones of the Sarmatian regional stage that is perhaps comparable with the Skalica Formation and finally it covers the algae strata known from the Pannonian regional stage. Thus the Leitha Limestone s.l. belongs to the middle and upper part of the Miocene, i.e. ranging from about 16 to 10 my BP. The geoscientific focus of this multidisciplinary research is on deciphering the petrological types and carbonate facies of stone monuments and building stones and on comparing them with the successions of the strata outcropping in abandoned quarries. We are recording distinguishing lithological features and collecting appropriate field samples for microscopic, petrophysical, and geochemical analysis. The results of these analyses will be used to characterise the different varieties of Leitha Limestone s.l. of the investigated stone objects, with a view to setting up a catalogue based on lithological types that could be of considerable value for restoration and conservation too. Carnuntum was the regional metropolis of the Roman province Pannonia Superior and one of the legionary camps along the Danube Limes from about 40 AD to the end of the 5th century. It is situated about 40 km east of Vienna city centre, in the present-day market-town of Petronell-Carnuntum. Most of the stone objects from Carnuntum are made of the local quarried Leitha Limestone s.l. from the Hainburg Mountains and from ancient quarries in the Leitha Mountains probably in the region between Winden, Jois and Bruckneudorf. As part of the same research project, the above-mentioned methods are also being applied to a Roman stone inventory from Vindobona and to individual discoveries from the surrounding region. The remains of Vindobona lie in the centre of Vienna - it was another legionary camp of the Danube Limes, from the 1st to the 5th century AD. Gravestones and ornamented architectural parts (for example) have been identified as Leitha Limestone s.l. from local quarries along the western border of the Vienna Basin as well as from further afield in the Leitha Mountains. Compared with Carnuntum, the geological hinterland of Vindobona contains a greater variety of natural stone resources and the catchment area for rock used in Vindobona appears to have extended southwards along the Alpine margin as far as Bad Fischau. In addition to our understanding of the geology and petrology of the Leitha Limestone s.l., archaeological conclusions will be drawn regarding the historic and economic value of the resources contained in the identified quarry districts during the Roman period. FWF-Project P 26368. Stone monuments and stone quarrying in the Carnuntum - Vindobona area. Project Leader: Gabrielle Kremer, Österreichische Akademie der Wissenschaften, Institut für Kulturgeschichte der Antike.

Sierra Nevada serpentinites. An important element in the architectonic heritage of Granada (Spain).

NASA Astrophysics Data System (ADS)

Navarro, Rafael; Pereira, Dolores; Rodríguez-Navarro, Carlos; Sebastián-Pardo, Eduardo

2013-04-01

Serpentinites are widely used in historic buildings in the whole world, from Ancient Greek or Egypt to more recent colonial buildings in the USA. Serpentinites from Sierra Nevada (S of Spain) have been traditionally used as ornamental elements in historic buildings of Granada city, both indoors and outdoors. The Cathedral, Carlos V Palace, Royal Chancery and some others are good examples of their use. Some other important cases can be found outside Granada, like El Escorial monastery, Las Salesas Reales convent, etc… all of them part of Madrid architectonic heritage. There are two quarries located in Sierra Nevada that supplied all the material to make the different elements in the cited buildings. In this work, a thorough characterization of the main serpentinites from Sierra Nevada, their uses, and their state of conservation in selected buildings from Granada has been performed. Samples from the main original quarry and from one historical building (Real Chancillería) have been analysed, determining the mineralogical and geochemical composition, texture, water parameters (absorption, porosity, density) and possible alteration by salt formation. It has been observed that the mineralogical and geochemical compositions are similar in both sets of samples, although the ones coming from the historical building show a highly advanced state of alteration. Regarding physical and mechanical parameters, samples from the quarry have very low water absorption values, while the porosity of serpentinites sampled from the Real Chancillería is comparatively much higher. We explain this difference as due to the weathering of the emplaced serpentinites by salt crystallization processes (mainly gypsum or epsomite), that generate strong internal pressures causing the disintegration of the whole natural stone. In addition, the increase of the porosity can be caused by dissolution processes related to the presence of acid solutions related to oxidation and hydrolysis of iron, chrome and nickel sulphides that were present in the original rock, and/or air pollution-derived SO2-attack. Knowing the condition of some of the serpentinite architectonic elements in Granada's historic buildings as well as the original quarry materials will help to face restoration in a more appropriate way than what has been done so far. Our work can be used as the base to establish future methods of remediation / conservation to prevent the deterioration of the serpentinite built heritage, but as well to recognize a natural stone that has been profusely used in the past in the construction of a magnificent heritage of an important city and historical quarries should be protected to provide original material if needed. This is a contribution of the Spanish network CONSTRUROCK.

Canada's National Building Stone: Tyndall Stone from Manitoba

NASA Astrophysics Data System (ADS)

Pratt, Brian R.; Young, Graham A.; Dobrzanski, Edward P.

2016-04-01

Tyndall Stone is a distinctively mottled and highly fossiliferous dolomitic limestone that belongs to the Selkirk Member of the Red River Formation, of Late Ordovician (Katian) age. It has been quarried at Garson, Manitoba, 37 km northeast of Winnipeg, since 1895, although other quarries in the area go back to 1832. Tyndall Stone, so named because it was shipped by rail from nearby Tyndall, is currently produced by Gillis Quarries Limited. It has various uses as a dimension stone. Large slabs, most often cut parallel to bedding, face the exterior or interior of many important buildings such as the Parliament Buildings and the Canadian Museum of Civilization in the Ottawa area, the Empress Hotel in Victoria, and the provincial legislatures in Winnipeg and Regina, as well as many commercial buildings especially in the Canadian prairies. At the quarries, the stone is cut vertically, using eight foot (2.44 m) diameter saws mounted on one hundred foot (30.5 m) tracks, then split into 6-8 tonne blocks that are moved using front-end loaders. Gillis Quarries operates a large finishing plant with an area of about 4000 m2. Stone is processed along advanced cutting lines that feature eight primary saws and six gantry saw stations, allowing it to be made into a variety of sizes, shapes, and finishes. The Selkirk Member is 43 m thick and the stone is extracted from a 6-8 m thick interval within the lower part. The upper beds tend to be more buff-coloured than the grey lower beds due to weathering by groundwater. The stone is massive, but extracted blocks are less than ~1m thick due to splitting along stylolites. Consisting of bioturbated wackestone to packstone, the Tyndall Stone was deposited in a shallow-marine environment within the photic zone, in the central part of the vast equatorial epicontinental sea that covered much of Laurentia. Scattered thin, bioclastic grainstone lenses record brief, low-energy storm events. The distinctive mottles are formed by dolomitized burrows belonging to Thalassinoides, which were interconnected galleries likely made by arthropods after the sediment became somewhat consolidated. Slabs bearing fossils are typically avoided in construction for esthetic reasons and because some impart weaknesses. Such slabs have, however, become increasingly popular for decorative surfaces not exposed to the elements, since the macrofossil content is so striking. Most common are receptaculitids, followed by solitary rugose corals, stromatoporoid sponges, colonial rugose and tabulate corals, brachiopods, bryozoans, gastropods, cephalopods, and trilobites; echinoderm ossicles are common in the muddy matrix. Fossil relative abundances vary stratigraphically, suggesting that subtle environmental changes took place over time.

5. VIEW FROM SLIGHTLY FARTHER DOWN SERVICE ROAD, LOOKING SOUTHEAST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. VIEW FROM SLIGHTLY FARTHER DOWN SERVICE ROAD, LOOKING SOUTHEAST AT ELECTRICITY SUPPLY BUILDING, LABORATORY, AND OFFICE. - Standard Lime & Stone Quarry, County Route 27, Millville, Jefferson County, WV

A Combined Remote Sensing-Numerical Modelling Approach to the Stability Analysis of Delabole Slate Quarry, Cornwall, UK

NASA Astrophysics Data System (ADS)

Havaej, Mohsen; Coggan, John; Stead, Doug; Elmo, Davide

2016-04-01

Rock slope geometry and discontinuity properties are among the most important factors in realistic rock slope analysis yet they are often oversimplified in numerical simulations. This is primarily due to the difficulties in obtaining accurate structural and geometrical data as well as the stochastic representation of discontinuities. Recent improvements in both digital data acquisition and incorporation of discrete fracture network data into numerical modelling software have provided better tools to capture rock mass characteristics, slope geometries and digital terrain models allowing more effective modelling of rock slopes. Advantages of using improved data acquisition technology include safer and faster data collection, greater areal coverage, and accurate data geo-referencing far exceed limitations due to orientation bias and occlusion. A key benefit of a detailed point cloud dataset is the ability to measure and evaluate discontinuity characteristics such as orientation, spacing/intensity and persistence. This data can be used to develop a discrete fracture network which can be imported into the numerical simulations to study the influence of the stochastic nature of the discontinuities on the failure mechanism. We demonstrate the application of digital terrestrial photogrammetry in discontinuity characterization and distinct element simulations within a slate quarry. An accurately geo-referenced photogrammetry model is used to derive the slope geometry and to characterize geological structures. We first show how a discontinuity dataset, obtained from a photogrammetry model can be used to characterize discontinuities and to develop discrete fracture networks. A deterministic three-dimensional distinct element model is then used to investigate the effect of some key input parameters (friction angle, spacing and persistence) on the stability of the quarry slope model. Finally, adopting a stochastic approach, discrete fracture networks are used as input for 3D distinct element simulations to better understand the stochastic nature of the geological structure and its effect on the quarry slope failure mechanism. The numerical modelling results highlight the influence of discontinuity characteristics and kinematics on the slope failure mechanism and the variability in the size and shape of the failed blocks.

Local Earthquake Tomography in the Eifel Region, Middle Europe

NASA Astrophysics Data System (ADS)

Gaensicke, H.

2001-12-01

The aim of the Eifel Plume project is to verify the existence of an assumed mantle plume responsible for the Tertiary and Quaternary volcanism in the Eifel region of midwest Germany. During a large passive and semi-active seismological experiment (November 1997 - June 1998) about 160 mobil broadband and short period stations were operated in addition to about 100 permanent stations in the area of interest. The stations registered teleseismic and local events. Local events are used to obtain a threedimensional tomographic model of seismic velocities in the crust. Since local earthquake tomography requires a large set of crustal travel paths, seismograms of local events recorded from July 1998 to June 2001 by permanent stations were added to the Eifel Plume data set. In addition to travel time corrections for the teleseismic tomography of the upper mantle, the new 3D velocity model should improve the precision for location of local events. From a total of 832 local seismic events, 172 were identified as tectonic earthquakes. The other events were either quarry blasts or shallow mine-induced seismic events. The locations of 60 quarry blasts are known and for 30 of them the firing time was measured during the field experiment. Since the origin time and location of these events are known with high precision, they are used to validate inverted velocity models. Station corrections from simultaneous 1D-inversion of local earthquake traveltimes and hypocenters are in good agreement with travel time residuals calculated from teleseismic rays. A strong azimuthal dependency of travel time residuals resulting from a 1D velocity model was found for quarry blasts with hypocenters in the volcanic field in the center of the Eifel. Simultaneous 3D-inversion calculations show strong heterogeneities in the upper crust and a negative anomaly for p-wave velocities in the lower crust. The latter either could indicate a low velocity zone close to the Moho or subsidence of the Moho. We present preliminary results obtained by simultaneous inversion of earthquake and velocity parameters constrained by known geological parameters and the controlled source information from calibrated quarry blasts.

Drenov Grič black limestone as a heritage stone from Slovenia

NASA Astrophysics Data System (ADS)

Kramar, Sabina; Rožič, Boštjan; Žbona, Nina; Bedjanič, Mojca; Mladenović, Ana

2016-04-01

The limestone known as Drenov Grič black limestone is considered one of the most beautiful Slovenian natural stones due to its homogenous black colour interwoven with white veins. Over the centuries it has been exploited from three major quarries west of Ljubljana, with the main quarry at Drenov Grič playing the primary role in supplying building material for the central parts of Slovenia. All the quarries are currently not active. In the area of Drenov grič, one locality of black limestone is protected - Kuclerjev kamnolom quarry. It has the status of 'valuable natural feature of national importance' and is protected as a natural monument. This well-stratified micritic limestone of Triassic (Carnian) age occurs in 10-80 cm thick beds, with thin marl interlayers. The stone contains abundant fossil bivalves and ostracods. Apart from calcite as the main component, dolomite, quartz, illite/muscovite and pyrite are also present. The limestone is relatively rich in carbonaceous and bituminous organic matter, which is responsible for the black colour of the stone. This component does not have any adverse effect on mechanical and physical characteristics. As the lime¬stone is dense, thus facilitating a good polish, it has been commercially considered as marble. The stone has been widely used in Slovenian monuments, not only in Ljubljana but also in other regions of Slovenia. Many inner and outdoor architectural elements were made of this limestone, particularly in the baroque period, which was known for the extensive use of black limestones also in other European countries. The most significant use of this limestone has been recorded in sculptured portals and altars. Some of the important buildings decorated utilising this stone, are the Ljubljana Cathedral, the St. James's Parish Church, and the Franciscan Church of the Annunciation, all of which are located in Ljubljana, some of them having been declared as cultural monuments of local or national importance. When exposed to climatic influences, chromatic weathering and salt weathering are recognized as the main deterioration phenomena of this limestone on monuments.

South approach, looking north. The galvanized piping extends from the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

South approach, looking north. The galvanized piping extends from the abutments across the length of the arch. - Weaverland Bridge, Quarry Road spanning Conestoga Creek, Terre Hill, Lancaster County, PA

Acushnet, Mass. Company Resolves Clean Water Concerns

EPA Pesticide Factsheets

A company with a mining, quarry and stone crushing facility in Acushnet, Mass. will now comply with Clean Water Act requirements, which will better protect people’s health and the local environment.

1. LOOKING SOUTHWEST TOWARD NORTH AND WEST SIDES OF OFFICE; ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. LOOKING SOUTHWEST TOWARD NORTH AND WEST SIDES OF OFFICE; LABORATORY AND ELECTRICITY SUPPLY HOUSE TO THE RIGHT. - Standard Lime & Stone Quarry, Office, County Route 27, Millville, Jefferson County, WV

Sustainable aggregates production : green applications for aggregate by-products.

DOT National Transportation Integrated Search

2015-06-01

Increased emphasis in the construction industry on sustainability and recycling requires production of : aggregate gradations with lower dust (cleaner aggregates) and smaller maximum sizeshence, increased : amount of quarry by-products (QBs). QBs ...

Aggregate sources for construction and maintenance in northern Arizona.

DOT National Transportation Integrated Search

2014-04-01

Constructing and maintaining Arizonas highway system requires a dependable, abundant supply of mineral : aggregates, borrow, quarried rock, and other materials. Finding such sources is important in northern Arizona, where : suitable materials may ...

7 CFR 330.111 - Advance notification of arrival of aircraft and watercraft.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE General Provisions § 330.111 Advance...

36 CFR 7.42 - Pipestone National Monument.

Code of Federal Regulations, 2012 CFR

2012-07-01

... INTERIOR SPECIAL REGULATIONS, AREAS OF THE NATIONAL PARK SYSTEM § 7.42 Pipestone National Monument. (a) An American Indian desiring to quarry and work “catlinite” pipestone shall first secure a permit from the...

36 CFR 7.42 - Pipestone National Monument.

Code of Federal Regulations, 2010 CFR

2010-07-01

... INTERIOR SPECIAL REGULATIONS, AREAS OF THE NATIONAL PARK SYSTEM § 7.42 Pipestone National Monument. (a) An American Indian desiring to quarry and work “catlinite” pipestone shall first secure a permit from the...

General Air Quality Permit Request for Coverage: US Silica - Parshall Transload Facility

EPA Pesticide Factsheets

Documents related to Request for Coverage under Stone Quarrying, Crushing, and Screening Facilities General Permit Indian Reservation, US Silica, Parshall Transload Facility, Fort Berthold Indian Reservation, North Dakota.

Silicosis

MedlinePlus

... metal ores. Silica is a main part of sand, so glass workers and sand-blasters are also exposed to silica. Three types ... Glass manufacturing Mining Quarrying Road and building construction Sand blasting Stone cutting Intense exposure to silica can ...

Rating Quantitative and Mapping of Sliding of the Quarry of Ouenza, Algeria

NASA Astrophysics Data System (ADS)

Mohamed, Boudiaf; Rachid, Chaib

The exploitation of iron ore deposit of Ouenza runs into serious difficulties related to landslides. Among the most important events of sliding, we have those of the site "Zerga" including lands located above the ore body "north" of Zerga. The overall area of the landslide is 40,000 m2. Instabilities of land are also manifested in other mine workings, thereby destroying the natural and economic resources. Thus, issues of prevention are needed to secure the career staff and preserve the resources and assets. Our goal is to determine the stability parameters of the quarry to allow the extraction of ore in good working conditions. This allows us to have a topographic map that puts us in the problem and gives us valuable information to guide us in our work to eliminate the slip

Stable isotopes back-track the origin of alabaster from the 'Ulrich Epitaph', Güstrow, Germany

NASA Astrophysics Data System (ADS)

Böttcher, Michael E.; Fuchs, Arnold; Gehre, Matthias; Krempler, Michael; Cooper, Anthony H.

2017-04-01

Natural calcium sulphate minerals (like gypsum, in the variety of 'alabaster') have been used for a long time for art and ornamental works despite its high solubility in aqueous solution due to its easy way of recovery and handling. To identify different European source provenances, geochemical and stable isotope forensic methods have been applied, thereby defining historical pathways of trade. A detailed geochemical characterization of both alabaster samples from the monument and potential sources is a pre-requisite for a backtracking material sources. Several tracers have been tested in the past identifiying the coupled sulfur and oxygen isotope composition of the sulfate molecule in the evaporite minerals to be highly characteristic. In the present study, we analyzed the stable sulfur and oxygen isotope composition of raw alabaster from the famous Ulrich Epithaph in Güstrow, Northeastern Germany, and compared the results with new measurements from one of the major European contributors of alabaster in the 16th century, the Cellaston quarry, Derbyshire (England) and literature data for further potential Spanish and Frensh source quarries (Kloppmann et a., 2014; Archaeometry, 56). We found that the stable sulfur and oxygen isotope signatures of alabaster from the Ulrich Epitaph indicate the origin from the Upper Triassic (Keuper) evaporites of the English Cellaston quarry and are not related to other potential alabaster sources. This further illustrates the alabaster trade way between England and Germany in the late 16th century.

Active faulting on the Wallula fault zone within the Olympic-Wallowa lineament, Washington State, USA

USGS Publications Warehouse

Sherrod, Brian; Blakely, Richard J.; Lasher, John P.; Lamb, Andrew P.; Mahan, Shannon; Foit, Franklin F.; Barnett, Elizabeth

2016-01-01

The Wallula fault zone is an integral feature of the Olympic-Wallowa lineament, an ∼500-km-long topographic lineament oblique to the Cascadia plate boundary, extending from Vancouver Island, British Columbia, to Walla Walla, Washington. The structure and past earthquake activity of the Wallula fault zone are important because of nearby infrastructure, and also because the fault zone defines part of the Olympic-Wallowa lineament in south-central Washington and suggests that the Olympic-Wallowa lineament may have a structural origin. We used aeromagnetic and ground magnetic data to locate the trace of the Wallula fault zone in the subsurface and map a quarry exposure of the Wallula fault zone near Finley, Washington, to investigate past earthquakes along the fault. We mapped three main packages of rocks and unconsolidated sediments in an ∼10-m-high quarry exposure. Our mapping suggests at least three late Pleistocene earthquakes with surface rupture, and an episode of liquefaction in the Holocene along the Wallula fault zone. Faint striae on the master fault surface are subhorizontal and suggest reverse dextral oblique motion for these earthquakes, consistent with dextral offset on the Wallula fault zone inferred from offset aeromagnetic anomalies associated with ca. 8.5 Ma basalt dikes. Magnetic surveys show that the Wallula fault actually lies 350 m to the southwest of the trace shown on published maps, passes directly through deformed late Pleistocene or younger deposits exposed at Finley quarry, and extends uninterrupted over 120 km.

30 CFR 56.3131 - Pit or quarry wall perimeter.

Code of Federal Regulations, 2011 CFR

2011-07-01

... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Ground Control... performing their assigned tasks, loose or unconsolidated material shall be sloped to the angle of repose or...

30 CFR 56.3131 - Pit or quarry wall perimeter.

Code of Federal Regulations, 2010 CFR

2010-07-01

... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Ground Control... performing their assigned tasks, loose or unconsolidated material shall be sloped to the angle of repose or...

29 CFR 570.108 - “Produced”.

Code of Federal Regulations, 2011 CFR

2011-07-01

... process or occupation directly essential to the production thereof, in any State.” (a) The prohibition of... mine, oil from oil wells, or stone from quarries. The statute also defines the term “produced” to mean...

2. PERSPECTIVE VIEW OF SOUTH SIDE AND WEST END OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. PERSPECTIVE VIEW OF SOUTH SIDE AND WEST END OF ENGINE REPAIR HOUSE, HARBISON-WALKER QUARRY - Harbison-Walker Refractories Company, Engine Repair House, West end of Shirley Street, Mount Union, Huntingdon County, PA

The wearing characteristics of mineral aggregates in highway pavements.

DOT National Transportation Integrated Search

1970-01-01

Fifteen asphaltic concrete and seventeen portland cement concrete pavements located in Virginia were chosen for studies of aggregate wear and related wet pavement friction. Coarse aggregates from thirteen different geologic formations and quarry sour...

Mining (except Oil and Gas) Sector (NAICS 212)

EPA Pesticide Factsheets

EPA Regulatory and enforcement information for the mining sector, including metal mining & nonmetallic mineral mining and quarrying. Includes information about asbestos, coal mining, mountaintop mining, Clean Water Act section 404, and abandoned mine lands

7 CFR 330.204 - Denial or cancellation of permits; reconsiderations.

Code of Federal Regulations, 2011 CFR

2011-01-01

...; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Plant Pests § 330.204 Denial or...; (4) The movement is adverse to the conduct of an eradication, suppression, control, or regulatory...

Adaptive control system of dump truck traction electric drive

NASA Astrophysics Data System (ADS)

Bolshunova, O. M.; Korzhev, A. A.; Kamyshyan, A. M.

2018-03-01

The paper describes the operational factors that determine the accident rate of a quarry motor vehicle and assessment of their impact on the choice of the operation mode of the traction drive control system.

29 CFR 570.108 - “Produced”.

Code of Federal Regulations, 2010 CFR

2010-07-01

... process or occupation directly essential to the production thereof, in any State.” (a) The prohibition of... mine, oil from oil wells, or stone from quarries. The statute also defines the term “produced” to mean...

The relevance of "Santa Pudia" calcarenite: a natural stone to preserve heritage buildings in Andalusia (Spain)

NASA Astrophysics Data System (ADS)

Navarro, Rafael; Molina, Eduardo; Baltuille, José Manuel

2013-04-01

"Santa Pudia" calcarenite, extracted in quarries from Granada (Andalusia, Spain), is a very important ornamental stone used in some of the main historical buildings in Andalusia, and particularly in the city of Granada. It has been used mainly outdoors with structural purposes (ashlars, columns), but is also used as decorative element in façades, pinnacles, etc. There are two main quarries, one historical ("Las Parideras") and another one currently under exploitation ("La Escribana"). Both were the source for all the material to make the different cited elements. Some of the main historical buildings using this stone in their construction, in one way or other, are the cathedral, The Royal Chapel, the Royal Hospital, San Juan de Dios monastery, the Royal Chancery or Carlos V Palace in the Alhambra, all of them in the city of Granada. In recent days, this natural stone has been used in the restoration of the Mosque of Córdoba and the Cinco Llagas Hospital in Seville. Although the main reference in industry for this natural stone is "Calcarenita de Santa Pudia", it can be found as well cited in the old literature under the denomination of "Piedra Franca". From a geological point of view is a white to yellow calcarenite, part of the Tortonian deposits of the Guadalquivir Basin (Post-Orogenic Neogene Basins of the Betic Chains). It's made up mainly by micritic matrix of calcite, with fragments of bioclasts (about 90%) including molluscs, echinoderms, briozoan, red algae and foraminifera. Other components, like metamorphic quartz, moscovite and/or schist or gneiss (rock fragments from the nearby metamorphic basement), can be found as well. The rock is poorly cemented with sparitic calcite. Regarding the main physical and mechanical properties, this rock has an open porosity between 25-36%, bulk density of 1,74 g/cm3, water absorption values at atmospheric pressure of 16%, compressive strength (dry) of 11 MPa, flexural strength (dry) of 2,3 MPa and salt crystallization loss of mass of 5%. It is a natural stone that easily decays in urban environments, therefore the importance of its proper knowledge and characterization. This natural stone, because of its relevance in the main heritage buildings in the monumental city of Granada can be considered a very important natural stone in Andalusia. Its nomination as Global Heritage Stone Resource will help to preserve the material, both in quarries and in historical buildings. This will guarantee the conservation and availability of material for future restoration works when needed. Its nomination is important as well to avoid the mistakes that can be produced from the equal name that is given to other natural stones quarried these days, not only in Andalusia (e.g. Piedra Dorada or Piedra Franca from Porcuna, in Jaén), but in other parts of Spain as well (e.g. Villamayor sandstone or Piedra Franca, quarried in Salamanca). This is a contribution of the Spanish network CONSTRUROCK.

Ground-water levels, water quality, and potential effects of toxic-substance spills or cessation of quarry dewatering near a municipal ground-water supply, southeastern Franklin County, Ohio

USGS Publications Warehouse

Sedam, A.C.; Eberts, S.M.; Bair, E.S.

1989-01-01

A newly completed municipal ground-water supply that produces from a sand and gravel aquifer in southern Franklin County, Ohio, may be susceptible to potential sources of pollution. Among these are spills of toxic substances that could enter recharge areas of the aquifer or be carried by surface drainage and subsequently enter the aquifer by induced infiltration. Ground water of degraded quality also is present in the vicinity of several landfills located upstream from the municipal supply. Local dewatering by quarrying operations has created a ground-water divide which, at present, prevents direct movement of the degraded ground water to the municipal supply. In addition, the dewatering has held water levels at the largest landfills below the base of the landfill. Should the dewatering cease, concern would be raised regarding the rise of water levels at this landfills and transport of contaminants through the aquifer to the Scioto River and subsequently by the river to the well field. From June 1984 through July 1986, the U.S. Geological Survey, in cooperation with the City of Columbus, Ohio, investigated the relations among the ground-water supply and potential sources of contamination by means of an observation-well network and a program of measuring water levels and sampling for water quality. Sample collections included those made to determine the baseline levels of organic chemicals and metals, as well as periodic sampling and analysis for common constituents to evaluate any changes taking place in the system. Finally, a steady-state, three-dimensional numerical model was used to determine ground-water flow directions and average ground-water velocities to asses potential effects of toxic-substance spills. The model also was used to simulate changes in the ground-water flow system that could result if part or all of the quarry dewatering ceased. Few of the organic-chemical and metal constituents analyzed for were present at detectable levels. With respect to chemical analysis of water and soil materials reported in earlier studies, no new problem areas were discovered as a result of either the baseline or periodic samplings. Model simulations suggest that, under March 1986 conditions, a toxic-substance spill along the major highways in the northern two-thirds of the study area eventually could discharge into one of the two quarries being dewatered or into the Scioto River. A toxic-substance spill in the southern one-third of the study area ultimately may discharge into the Scioto River, Big Walnut Creek, or possibly into the municipal ground-water supply. Model simulations also indicate that concentrated landfill leachate probably would not reach the municipal ground-water supply under current or well-field pumping conditions if dewatering ceased at either or both of the quarries.

Environmental rehabilitation of dismissed quarry areas in the Emilia Apennines (Italy) based on the exploitation of geosites

NASA Astrophysics Data System (ADS)

Soldati, Mauro; Coratza, Paola; Vandelli, Vittoria

2016-04-01

The landscape modifications induced by human activity in the past 50 years, due to quarrying in the catchment of Rio della Rocca (Province of Reggio Emilia, northern Italy) and plans for its environmental rehabilitation, are illustrated. The study area is located in the northern Apennines margin, specifically in the municipality of Castellarano, and is characterised by a great variety of abiotic environments and high biodiversity. As regards the geological aspects of the area, the main lithological outcrops consists of yellow sandstones belonging to the Epi-Ligurian Sequence (Upper Eocene - Lower Oligocene) and grey clays (Lower Pliocene - Lower Pleistocene) of the marine units of the Apennine margin. From a geomorphological viewpoint, the landscape evolution of this valley has been deeply influenced by the presence of rocks with different mechanical behaviour, gravitational and rainwash processes and, more recently, human activities. The latter have played a fundamental role in modelling the physical landscape of the area in recent times. In the Sassuolo area (Province of Modena), very close to the study area, there is the largest tile making district in the world, which was developed during the '60s and '70s of the 20th century, partly thanks to the wide availability of clayey raw materials with suitable technological properties. Since the mid-1950s the study area has been affected by intense quarrying activities which have largely modified its environmental and, in particular, geomorphological features. In the 1970s, three clay pits and four sandstone quarries were active in the area. The clay pits were used for tile production whereas the sandstone materials were utilised in large part for the building industry. This production scenario has radically changed during the past twenty years, with the progressive abandonment of quarries due to the introduction of ever-more restrictive environmental policies, imposing rigorous planning on mining activities. Considering the high scenic and environmental value of the study area, multidisciplinary investigations concerning the main geological, botanical and faunistic aspects were carried out in order to plan the environmental rehabilitation of the whole valley. Specific attention was given to recognition and assessment of geosites of the area in order to exploit them within a Masterplan. On the basis of the results attained, proposals of territorial upgrading have been developed by taking into account also appraisal measures for geotourism and recreational purposes. A series of specific proposals have been presented for the protection and use of sites of geological interest in the valley. These proposals include the design of physical protection measurements, the formulation of traditional itineraries, aiming at integrating geological-geomorphological elements and information on flora and fauna, and the appraisal of geosites as basis for fostering tourism and recreation and contributing to economic activities. The aim is to show the link between Man and the geological environment with respect to exploitation of raw materials which are particularly abundant in the area studied.

Whitaker Aggregates, Inc. d/b/a Centerville Quarry

EPA Pesticide Factsheets

The EPA is providing notice of a proposed Administrative Penalty Assessment against Whitaker Aggregates, Inc., a business located at 555 Delaware Road, Humbolt, KS 66748 for alleged violations of its National Pollutant Discharge Elimination System permit (

Research notes : aggregate into the future.

DOT National Transportation Integrated Search

2000-03-01

Research staff is conducting an inventory of ODOT owned and leased quarry sites to estimate current aggregate resources. The research team is using Global Positioning System coordinates to locate and catalog sites. The study will identify sites with ...

Age and correlation of the Calera Limestone in the Permanente terrane of northern California

USGS Publications Warehouse

Sliter, William V.; McGann, Mary

1992-01-01

Planktonic foraminifers indicate that outcrops of Calera Limestone from the Permanente terrane in the Franciscan Complex of northern California range in age from possibly as old as Barremian to late Turonian. Underlying black limestone, which is devoid of planktonic foraminifers, presumably is Barremian in age or older. The top of the sequence exposed in major quarries is always faulted. Improved biostratigraphic resolution shows two patterns of missing time intervals. The primary pattern, which is found at all localities and involves missing planktonic foraminiferal zones in the late Aptian to early Albian and the late Albian, is linked to paleoceanographic changes in the Cretaceous Pacific Ocean. The secondary pattern, which is found at the scattered outcrops outside the major quarries and involves missing zones in the Albian and Cenomanian, suggests the results of a common tectonic history related to the accretion of a large seamount.

Doses from radon 222 irradiation for workers of the granite mining industry.

PubMed

Сrygorieva, L; Tomilin, Yu

2017-12-01

determining the integral value of annual effective dose from 222Rn for workers of the granite mining industry and assessment for the expected life effective dose from 222Rn. Materials were the results of measurements of external exposure dose of radiation measurements equiv alent equilibrium volume activity of 222Rn in workrooms and workplaces of major groups of granite quarry workers Mykolaiv region, studies EROA 222Rn air premises of these workers, research content 222Rn in drinking water. Granite quarry workers receive double radiation exposure of 222Rn due to exposure in the workplace and at home. The load in the workplace due to inhalation of 222Rn the air was (2.1 ± 0.2) mSv / year (vari ation 0.9-5.9) in a residential area - (4,1 ± 0,2) mSv/year (variation 1.8-5.9). The total annual effective dose from internal exposure from air flow and working premises and drinking water was on average (6,5 ± 0,2) mSv/year, equal to a maximum value of 20 mSv/year. The expected life for the chronic exposure dose of technological naturally occurring radioactive sources for people who work in the granite quarries and, while living in high risk from radon is in the range of 0.16-1.12 Sv. The research results indicate that in assessing the effects associated with exposure due to radon 222 contingents persons such surveys must take into account all sources of this radionuclide dose. L. Сrygorieva, Yu. Tomilin.

Comments on the Yule Marble Haines block: potential replacement, Tomb of the Unknown Soldier, Arlington National Cemetery

USGS Publications Warehouse

Mossotti, Victor G.

2014-01-01

Marble for the Tomb of the Unknown Soldier at Arlington National Cemetery was cut from the Colorado Yule Marble Quarry in 1931. Although anecdotal reports suggest that cracks were noticed in the main section of the monument shortly after its installation at the Arlington National Cemetery in Arlington, Virginia, detailed documentation of the extent of cracking did not appear until 1963. Although debate continues as to whether the main section of the Tomb of the Unknowns monument should be repaired or replaced, Mr. John S. Haines of Glenwood Springs, Colorado, in anticipation of the permanent closing of the Yule Quarry, donated a 58-ton block of Yule Marble, the so-called Haines block, as a potential backup. The brief study reported here was conducted during mid-summer 2009 at the behest of the superintendent of Arlington National Cemetery. The field team entered the subterranean Yule Marble Quarry with the Chief Extraction Engineer in order to contrast the method used for extraction of the Haines block with the method that was probably used to extract the marble block that is now cracked. Based on surficial inspection and shallow coring of the Haines block, and on the nature of crack propagation in Yule Marble as judged by close inspection of a large collection of surrogate Yule Marble blocks, the team found the block to be structurally sound and cosmetically equivalent to the marble used for the current monument. If the Haines block were needed, it would be an appropriate replacement for the existing cracked section of the Tomb of the Unknown Soldier Monument.

A three-dimensional back-analysis of the collapse of an underground cavity in soft rocks

NASA Astrophysics Data System (ADS)

Fazio, Nunzio Luciano; Lollino, Piernicola; Perrotti, Michele; Parise, Mario; Bonamini, Marco; Di Maggio, Cipriano; Madonia, Giuliana; Vattano, Marco

2016-04-01

Anthropogenic sinkholes have recently occurred in built-up areas of Sicily (southern Italy) and are generally associated with the presence of ancient underground quarries for the extraction of soft calcarenite rock, used as building material. These quarries were poorly excavated and then were abandoned in the following decades; urban expansion has recently enlarged to involve the areas affected by presence of the cavities, so that the likely collapse of the underground systems poses serious risks to people, buildings and infrastructures. The present work focuses on the case of the town of Marsala, where in 2003 a sinkhole opened at the outskirts of town, near peri-urban buildings. Field surveys, structural analysis of the joint networks in the rock mass and numerical modeling were carried out in order to investigate the most significant factors responsible of the instability processes of the underground quarry. In particular, a geotechnical three-dimensional model has been defined based on in-situ measurements and surveys. The FEM analyses have been performed with the code Plaxis-3D, by using initially the Mohr-Coulomb elasto-plastic model and then assessing the influence of the joint systems on the rock-mass stability with a jointed rock anisotropic model. Discrete planar bands have been also used to simulate the effect of specific joints, as an alternative to the jointed rock model. The results are in good agreement with the failure mechanism generated during the 2003 sinkhole event, and confirm that reliable analyses of these problems requires 3-D sophisticated tools.

Ultrasonic characterization of granites obtained from industrial quarries of Extremadura (Spain).

PubMed

del Río, L M; López, F; Esteban, F J; Tejado, J J; Mota, M; González, I; San Emeterio, J L; Ramos, A

2006-12-22

The industry of ornamental rocks, such as granites, represents one of the most important industrial activities in the region of Extremadura, SW Spain. A detailed knowledge of the intrinsic properties of this natural stone and its environmental evolution is a required goal in order to fully characterize its quality. In this work, two independent NDT acoustic techniques have been used to measure the acoustic velocity of longitudinal waves in different prismatic granitic-samples of industrial quarries. A low-frequency transceiver set-up, based on a high-voltage BPV Steinkamp instrument and two 50 kHz probes, has been used to measure pulse travel times by ultrasonic through-transmission testing. In complementary fashion, an Erudite MK3 test equipment with an electromagnetic vibrator and two piezoelectric sensors has also been employed to measure ultrasonic velocity by means of a resonance-based method, using the same types of granite varieties. In addition, a comprehensive set of physical/mechanical properties have also been analyzed, according to Spanish regulations in force, by means of alternative methods including destructive techniques such as strength, porosity, absorption, etc. A large number of samples, representing the most important varieties of granites from quarries of Extremadura, have been analyzed using the above-mentioned procedures. Some results obtained by destructive techniques have been correlated with those found using ultrasonic techniques. Our experimental setting allowed a complementary characterization of granite samples and a thorough validation of the different techniques employed, thus providing the industry of ornamental rocks with a non-destructive tool that will facilitate a more detailed insight on the properties of the rocks under study.

Antagonistic perception of a rock-mass as geomorphosite and/or mineral resource with specific concern of natural stone for heritage conservation

NASA Astrophysics Data System (ADS)

Prikryl, Richard

2016-04-01

Prior to industrial era, the quarrying of natural stone was primarily local (the stone has been used very close to its extraction in most of the cases), small scale, occasional (the stone has been extracted only when needed for specific construction, permanent operations were much rarer than nowadays) but long-term (the quarrying activity at one site persisted over centuries very often). The landscape affected by such quarrying (as we can observe it at present) gained numerous new values (e.g., increased morphological contrast, succession of wildlife habitat, etc.) that are often appreciated more than the presence of valuable mineral resource - natural stone. If these site were claimed natural monuments or gained another type of environmental protection, any further extraction of natural stone is prohibited. However, if the specific site was used for extraction of natural stone that has been used for construction which later became cultural heritage object, the antagonistic perception of the site might appear - the site might be protected as a geomorphosite but, at the same time, it can be a source of unique natural stone required for the restoration of cultural heritage objects. This paper, along with above mentioned basic relationships, provides some real examples connected with the difficulties to find the extractable source of natural stone for restoration of iconic cultural heritage objects - specifically search for sources of Carboniferous arkoses to be used for replacement of the decayed ashlars at the Gothic Charles Bridge in Prague (Czech Republic).

Ichnology of an upper carboniferous fluvio-estuarine paleovalley: The tonganoxie sandstone, buildex quarry, eastern Kansas, USA

USGS Publications Warehouse

Buatois, L.A.; Mangano, M.G.; Maples, C.G.; Lanier, Wendy E.

1998-01-01

Tidal rhythmites of the Tonganoxie Sandstone Member (Stranger Formation, Douglas Group) at Buildex Quarry, eastern Kansas, contain a relatively diverse ichnofauna. The assemblage includes arthropod locomotion (Dendroidichnites irregulare, Diplichnites gouldi type A and B, Diplopodichnus biformis, Kouphichnium isp., Mirandaichnium famatinense, and Stiaria intermedia), resting (Tonganoxichnus buildexensis) and feeding traces (Stiallia pilosa, Tonganoxichnus ottawensis); grazing traces (Gordia indianaensis, Helminthoidichnites tenuis, Helminthopsis hieroglyphica); feeding structures (Circulichnis montanus, Treptichnus bifurcus, Treptichnus pollardi, irregular networks), fish traces (Undichna britannica, Undichna simplicitas), tetrapod trackways, and root traces. The taxonomy of some of these ichnotaxa is briefly reviewed and emended diagnoses for Gordia indianaensis and Helminthoidichnites tenuis are proposed. Additionally, the combined name Dendroidichnites irregulare is proposed for nested chevron trackways. Traces previously regarded as produced by isopods are reinterpreted as myriapod trackways (D. gouldi type B). Trackways formerly interpreted as limulid crawling and swimming traces are assigned herein to Kouphichnium isp and Dendroidichnites irregulare, respectively. Taphonomic analysis suggests that most grazing and feeding traces were formed before the arthropod trackways and resting traces. Grazing/feeding traces were formed in a soft, probably submerged substrate. Conversely, the majority of trackways and resting traces probably were produced subaerially in a firmer, dewatered and desiccated sediment. The Buildex Quarry ichnofauna records the activity of a terrestrial and freshwater biota. The presence of this assemblage in tidal rhythmites is consistent with deposition on tidal flats in the most proximal zone of the inner estuary, between the maximum landward limit of tidal currents and the salinity limit further towards the sea.

Sedimentary processes and architecture of Upper Cretaceous deep-sea channel deposits: a case from the Skole Nappe, Polish Outer Carpathians

NASA Astrophysics Data System (ADS)

Łapcik, Piotr

2018-02-01

Deep-sea channels are one of the architectonic elements, forming the main conduits for sand and gravel material in the turbidite depositional systems. Deep-sea channel facies are mostly represented by stacking of thick-bedded massive sandstones with abundant coarse-grained material, ripped-up clasts, amalgamation and large scale erosional structures. The Manasterz Quarry of the Ropianka Formation (Upper Cretaceous, Skole Nappe, Carpathians) contains a succession of at least 31 m of thick-bedded high-density turbidites alternated with clast-rich sandy debrites, which are interpreted as axial deposits of a deep-sea channel. The section studied includes 5 or 6 storeys with debrite basal lag deposits covered by amalgamated turbidite fills. The thickness of particular storeys varies from 2.5 to 13 m. Vertical stacking of similar facies through the whole thickness of the section suggest a hierarchically higher channel-fill or a channel complex set, with an aggradation rate higher than its lateral migration. Such channel axis facies cannot aggrade without simultaneous aggradation of levee confinement, which was distinguished in an associated section located to the NW from the Manasterz Quarry. Lateral offset of channel axis facies into channel margin or channel levee facies is estimated at less than 800 m. The Manasterz Quarry section represents mostly the filling and amalgamation stage of channel formation. The described channel architectural elements of the Ropianka Formation are located within the so-called Łańcut Channel Zone, which was previously thought to be Oligocene but may have been present already in the Late Cretaceous.

Assessment of Environmental Impacts of Limestone Quarrying Operations in Thailand

NASA Astrophysics Data System (ADS)

Kittipongvises, Suthirat

2017-11-01

Environmental impacts of the mineral extraction have been a public concern. Presently, there is widespread global interest in the area of mining and its sustainability that focused on the need to shift mining industry to a more sustainable framework. The aim of this study was to systematically assess all possible environmental and climate change related impacts of the limestone quarrying operation in Thailand. By considering the life cycle assessment method, the production processes were divided into three phases: raw material extraction, transportation, and comminution. Both IMPACT 2002+ and the Greenhouse Gas Protocol methods were used. Results of IMPACT 2002+ analysis showed that per 1 ton crushed limestone rock production, the total depletion of resource and GHGs emissions were 79.6 MJ and 2.76 kg CO2 eq., respectively. Regarding to the four damage categories, `resources' and `climate change' categories were the two greatest environmental impacts of the limestone rock production. Diesel fuel and electricity consumption in the mining processes were the main causes of those impacts. For climate change, the unit of CO2 eq. was expressed to quantify the total GHGs emissions. Estimated result was about 3.13 kg CO2 eq. per ton limestone rock product. The results obtained by the Greenhouse Gas Protocol were also similar to IMPACT 2002+ method. Electrical energy consumption was considered as the main driver of GHGs, accounting for approximately 46.8 % of total fossil fuel CO2 emissions. A final point should be noted that data uncertainties in environmental assessment over the complete life cycle of limestone quarrying operation have to be carefully considered.

7 CFR 330.111 - Advance notification of arrival of aircraft and watercraft.

Code of Federal Regulations, 2011 CFR

2011-01-01

...; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE General Provisions § 330.111 Advance.... (Approved by the Office of Management and Budget under control number 0579-0054) [52 FR 49344, Dec. 31, 1987] ...

6. VIEW WEST, PERSPECTIVE UP INCLINED PLANE FROM MIDSLOPE VICINITY, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. VIEW WEST, PERSPECTIVE UP INCLINED PLANE FROM MID-SLOPE VICINITY, CUT CONFIGURATION - Laurel Hill Quarry, Incline Plane, Both sides of State Route 56, 2.4 miles East of State Route 711, Seward, Westmoreland County, PA

5. VIEW WEST, PERSPECTIVE UP INCLINED PLANE FROM TOP OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. VIEW WEST, PERSPECTIVE UP INCLINED PLANE FROM TOP OF ABUTMENT, FILL CONFIGURATION - Laurel Hill Quarry, Incline Plane, Both sides of State Route 56, 2.4 miles East of State Route 711, Seward, Westmoreland County, PA

Fisher Sand & Gravel New Mexico, Inc. General Air Quality Permit: Related Documents

EPA Pesticide Factsheets

Documents related to the Fisher Sand & Gravel – New Mexico, Inc., Grey Mesa Gravel Pit General Air Quality Permit for New or Modified Minor Source Stone Quarrying, Crushing, and Screening Facilities in Indian Country.

Wynoochee Dam Foundation Report

DTIC Science & Technology

1988-01-01

schists and in propylitized andesite volcanic rocks. Tests on chlorite-bearing graywackes (Lumni Island and Robe Quarry, Seattle District) and... propylitized chlorite-bearing andesites (Blue River and Lookout Point Dams, Portland District) have shown these rocks to be durable materials with only minor

25. INTERIOR OF GLAZE KILN NO. 2, SHOWING HOW SAGGERS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

25. INTERIOR OF GLAZE KILN NO. 2, SHOWING HOW SAGGERS AND LOOSE QUARRY TILES WERE STACKED. - Moravian Pottery & Tile Works, Southwest side of State Route 313 (Swamp Road), Northwest of East Court Street, Doylestown, Bucks County, PA

"Sydney sandstone": Heritage Stone from Australia

NASA Astrophysics Data System (ADS)

Cooper, Barry; Kramar, Sabina

2014-05-01

Sydney is Australia's oldest city being founded in 1788. The city was fortunate to be established on an extensive and a relatively undeformed layer of lithified quartz sandstone of Triassic age that has proved to be an ideal building stone. The stone has been long identified by geologists as the Hawkesbury Sandstone. On the other hand the term "Sydney sandstone" has also been widely used over a long period, even to the extent of being utilised as the title of published books, so its formal designation as a heritage stone will immediately formalise this term. The oldest international usage is believed to be its use in the construction of the Stone Store at Kerikeri, New Zealand (1832-1836). In the late 19th century, public buildings such as hospitals, court houses as well as the prominent Sydney Town Hall, Sydney General Post Office, Art Gallery of New South Wales, State Library of New South Wales as well as numerous schools, churches, office building buildings, University, hotels, houses, retaining walls were all constructed using Sydney sandstone. Innumerable sculptures utilising the gold-coloured stone also embellished the city ranging from decorative friezes and capitals on building to significant monuments. Also in the late 19th and early 20th century, Sydney sandstone was used for major construction in most other major Australian cities especially Melbourne, Adelaide and Brisbane to the extent that complaints were expressed that suitable local stone materials were being neglected. Quarrying of Sydney sandstone continues today. In 2000 it was recorded noted that there were 33 significant operating Sydney sandstone quarries including aggregate and dimension stone operations. In addition sandstone continues to be sourced today from construction sites across the city area. Today major dimension stone producers (eg Gosford Quarries) sell Sydney sandstone not only into the Sydney market but also on national and international markets as cladding and paving products as well as block. Recent international projects by Gosford Quarries include Mishima Golf Club in Japan, Al Awadi Tower in Kuwait, New World Resort in China and a Hard Rock Café in Florida, USA. Arguably Sydney sandstone is Australia's most prominent potential Global Heritage Stone Resource and details are readily available in existing publications to make the nomination.

Comparison of water absorption methods: testing the water absorption of recently quarried and weathered porous limestone on site and under laboratory conditions

NASA Astrophysics Data System (ADS)

Rozgonyi-Boissinot, Nikoletta; Agárdi, Tamás; Karolina Cebula, Ágnes; Török, Ákos

2017-04-01

The water absorption of weathering sensitive stones is a critical parameter that influences durability. The current paper compares different methods of water absorption tests by using on site and laboratory tests. The aims of the tests were to assess the water absorption of un-weathered quarry stones and various weathering forms occurring on porous limestone monuments. For the tests a Miocene porous limestone was used that occurs in Central and Western Hungary and especially near and in Budapest. Besides the Hungarian occurrences the same or very similar porous limestones are found in Austria, Slovakia and in the Czech Republic. Several quarries were operating in these countries. Due to the high workability the stone have been intensively used as construction material from the Roman period onward. The most prominent monuments made of this stone were built in Vienna and in Budapest during the 18th -19th century and in the early 20th century. The high porosity and the micro-fabric of the stone make it prone to frost- and salt weathering. Three different limestone types were tested representing coarse-, medium- and fine grained lithologies. The test methods included Rilem tube (Karsten tube) tests and capillary water absorption tests. The latter methodology has been described in detail in EN 1925:2000. The test results of on-site tests of weathered porous limestone clearly show that the water absorption of dissolved limestone surfaces and crumbling or micro-cracked limestone is similar. The water absorption curves have similar inclinations marking high amount of absorbed water. To the contrary, the white weathering crusts covered stone blocks and black crusts have significantly lower water absorptions and many of these crusts are considered as very tight almost impermeable surfaces. Capillary water absorption tests in the laboratory allowed the determination of maximum water absorption of quarried porous limestone. Specimens were placed in 3 mm of water column and the absorbed amount of water was detected. The obtained 29-30m% water absorption values compared to the 30-35m% of the total porosity of the stone, clearly suggest that the pores can be saturated with water under standard barometric pressure and therefore the tested porous Miocene limestones are very prone to salt attack.

Granodiorite - one of the most significant Slovenian natural stones

NASA Astrophysics Data System (ADS)

Kramar, Sabina; Trajanova, Mirka; Rogan-Šmuc, Nastja; Gutman, Maja; Bedjanič, Mojca; Mladenovič, Ana

2015-04-01

The paper provides a description of the petrographic and mechanical characteristics of granodiorite from the Pohorje Mountains (NE Slovenia) and of its use as a natural stone. This stone, which is a calc-alkaline igneous rock of Miocene age (18.7 Ma), is characterised by its grey colour and by its thick white aplite-pegmatite veins. It mainly consists of plagioclase, quartz, and K-feldspar, which are light coloured constituents, with biotite and a small amount of hornblende as dark coloured minerals. Some other minerals are found in traces, among which pyrite is considered to be the most problematic. However, due to the presence of a small amount of arsenic, the pyrite is quite stable and not prone to alteration. In Slovenia currently two quarries are located in granodiorite, both protected as valuable natural geological features; an active quarry at Cezlak which is the largest quarry in magmatic rocks in Slovenia and the abandoned quarry in Josipdol. Granodiorite is considered the highest quality natural stone in Slovenia. It is characterised by high density, low water absorption, and low open porosity, so that it exhibits high frost and salt resistance, as well as a high compressive strength and an extremely high flexural strength, which is due to its pronounced oriented structure. It is widely recognized throughout Slovenia by its durability and its decorative white veins, and is currently the most frequently used natural stone in Slovenia. It is mainly used as paving and cladding material for residential buildings, churches, and other structures, as well as for squares, thus giving a special character to many of Slovenia's largest towns and cities. Several important buildings are decorated by means of this stone, such as the Slovenian Parliament, the Republic Square business complex, the Maximarket department store, and the Faculty of Law of the University of Ljubljana, all of which are located in Ljubljana, some of them having been declared as cultural monuments of national importance. Since 1940 granodiorite has also been widely used by sculptors for various monuments and fountains. An unusual type of degradation of cladding panels, in the form of bowing, was detected on the façades of the above-mentioned Maximarket, which was constructed in 1971. This phenomenon is one among the very few documented cases of the bowing of magmatic rocks.

CodingQuarry: highly accurate hidden Markov model gene prediction in fungal genomes using RNA-seq transcripts.

PubMed

Testa, Alison C; Hane, James K; Ellwood, Simon R; Oliver, Richard P

2015-03-11

The impact of gene annotation quality on functional and comparative genomics makes gene prediction an important process, particularly in non-model species, including many fungi. Sets of homologous protein sequences are rarely complete with respect to the fungal species of interest and are often small or unreliable, especially when closely related species have not been sequenced or annotated in detail. In these cases, protein homology-based evidence fails to correctly annotate many genes, or significantly improve ab initio predictions. Generalised hidden Markov models (GHMM) have proven to be invaluable tools in gene annotation and, recently, RNA-seq has emerged as a cost-effective means to significantly improve the quality of automated gene annotation. As these methods do not require sets of homologous proteins, improving gene prediction from these resources is of benefit to fungal researchers. While many pipelines now incorporate RNA-seq data in training GHMMs, there has been relatively little investigation into additionally combining RNA-seq data at the point of prediction, and room for improvement in this area motivates this study. CodingQuarry is a highly accurate, self-training GHMM fungal gene predictor designed to work with assembled, aligned RNA-seq transcripts. RNA-seq data informs annotations both during gene-model training and in prediction. Our approach capitalises on the high quality of fungal transcript assemblies by incorporating predictions made directly from transcript sequences. Correct predictions are made despite transcript assembly problems, including those caused by overlap between the transcripts of adjacent gene loci. Stringent benchmarking against high-confidence annotation subsets showed CodingQuarry predicted 91.3% of Schizosaccharomyces pombe genes and 90.4% of Saccharomyces cerevisiae genes perfectly. These results are 4-5% better than those of AUGUSTUS, the next best performing RNA-seq driven gene predictor tested. Comparisons against whole genome Sc. pombe and S. cerevisiae annotations further substantiate a 4-5% improvement in the number of correctly predicted genes. We demonstrate the success of a novel method of incorporating RNA-seq data into GHMM fungal gene prediction. This shows that a high quality annotation can be achieved without relying on protein homology or a training set of genes. CodingQuarry is freely available ( https://sourceforge.net/projects/codingquarry/ ), and suitable for incorporation into genome annotation pipelines.

Villamayor stone (Golden Stone) as a Global Heritage Stone Resource from Salamanca (NW of Spain)

NASA Astrophysics Data System (ADS)

Garcia-Talegon, Jacinta; Iñigo, Adolfo; Vicente-Tavera, Santiago

2013-04-01

Villamayor stone is an arkosic stone of Middle Eocene age and belongs to the Cabrerizos Sandstone Formation that comprising braided fluvial systems and paleosoils at the top of each stratigraphic sequence. The sandstone is known by several names: i) the Villamayor Stone because the quarries are located in Villamayor de Armuña village that are situated at 7 km to the North from Salamanca city; ii) the Golden Stone due to its patina that produced a ochreous/golden color on the façades of monuments of Salamanca (World Heritage City,1988) built in this Natural stone (one of the silicated rocks utilised). We present in this work, the Villamayor Stone to be candidate as Global Heritage Stone Resource. The Villamayor Stone were quarrying for the construction and ornamentation of Romanesque religious monuments as the Old Cathedral and San Julian church; Gothic (Spanish plateresc style) as the New Cathedral, San Esteban church and the sculpted façade of the Salamanca University, one of the oldest University in Europe (it had established in 1250); and this stone was one of the type of one of the most sumptuous Baroque monuments is the Main Square of the its galleries and arcades (1729). Also, this stone was used in building palaces, walls and reconstruction of Roman bridge. Currently, Villamayor Stone is being quarried by small and family companies, without a modernized processing, for cladding of the façades of the new buildings until that the construction sector was burst (in 2008 the international economic crisis). However, Villamayor Stone is the main stone material used in the city of Salamanca for the restoration of monuments and, even in small quantities when compared with just before the economic crisis, it would be of great importance for future generations protect their quarries and the craft of masonry. Villamayor Stone has several varieties from channels facies to floodplains facies, in this work the selected varieties are: i) the fine-grained stone, microporous, is partially cemented by dolomite, 27% (bulk porosity), ii) the ochre and fine-grained stone, microporous, with smectite, 30% (bulk porosity), iii) the medium-grained stone, 38% (bulk porosity). Main components for all three varieties: Quartz (up to 60%), feldspars, 2:1 layered silicates (smectites), palygorskite-type fibrous silicates, and small amounts of micaceous minerals (illite/mica).

7 CFR 330.101 - Policy.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 5 2011-01-01 2011-01-01 false Policy. 330.101 Section 330.101 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.103 - Documentation.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 5 2014-01-01 2014-01-01 false Documentation. 330.103 Section 330.103 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.103 - Documentation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Documentation. 330.103 Section 330.103 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.103 - Documentation.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 5 2012-01-01 2012-01-01 false Documentation. 330.103 Section 330.103 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.101 - Policy.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Policy. 330.101 Section 330.101 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.103 - Documentation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 5 2011-01-01 2011-01-01 false Documentation. 330.103 Section 330.103 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.103 - Documentation.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 5 2013-01-01 2013-01-01 false Documentation. 330.103 Section 330.103 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.109 - Caution.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 5 2012-01-01 2012-01-01 false Caution. 330.109 Section 330.109 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.109 - Caution.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 5 2014-01-01 2014-01-01 false Caution. 330.109 Section 330.109 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.109 - Caution.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 5 2011-01-01 2011-01-01 false Caution. 330.109 Section 330.109 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.109 - Caution.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 5 2013-01-01 2013-01-01 false Caution. 330.109 Section 330.109 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.101 - Policy.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 5 2013-01-01 2013-01-01 false Policy. 330.101 Section 330.101 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.101 - Policy.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 5 2012-01-01 2012-01-01 false Policy. 330.101 Section 330.101 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.109 - Caution.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Caution. 330.109 Section 330.109 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.101 - Policy.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 5 2014-01-01 2014-01-01 false Policy. 330.101 Section 330.101 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

DETAIL VIEW OF LARGE BORE HOLE, SHOWING TRIANGULAR SHAPE FORMED ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAIL VIEW OF LARGE BORE HOLE, SHOWING TRIANGULAR SHAPE FORMED BY CHISEL METHOD OF DRILLING - Granite Hill Plantation, Quarry No. 3, South side of State Route 16, 1.3 miles northeast east of Sparta, Sparta, Hancock County, GA

Whitaker Aggregates, Inc. d/b/a Centerville Quarry - Clean Water Act Public Notice

EPA Pesticide Factsheets

The EPA is providing notice of a proposed Administrative Penalty Assessment against Whitaker Aggregates, Inc., a business located at 555 Delaware Road, Humbolt, KS 66748 for alleged violations of its National Pollutant Discharge Elimination System permit (

7 CFR 330.202 - Consideration of applications for permits to move plant pests.

Code of Federal Regulations, 2011 CFR

2011-01-01

...; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Plant Pests § 330.202... Budget under control number 0579-0054) [24 FR 10825, Dec. 29, 1959, as amended at 48 FR 57466, Dec. 30...

Stream Restoration to Manage Nutrients in Degraded Watersheds

EPA Science Inventory

Historic land-use change can reduce water quality by impairing the ability of stream ecosystems to efficiently process nutrients such as nitrogen. Study results of two streams (Minebank Run and Big Spring Run) affected by urbanization, quarrying, agriculture, and impoundments in...

Photographic copy of architectural drawing (original drawing located at the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of architectural drawing (original drawing located at the Panama Canal Commission Headquarters Building, Department of Engineering Vault, Balboa Heights, Republic of Panama). Rear elevation. - Quarry Heights, Officers' Quarters, Parkinson Lane, Balboa, Former Panama Canal Zone, CZ

Photographic copy of architectural drawing (original drawing located at the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of architectural drawing (original drawing located at the Panama Canal Commission Headquarters Building, Department of Engineering Vault, Balboa Heights, Republic of Panama). Longitudinal section. - Quarry Heights, Officers' Quarters, Parkinson Lane, Balboa, Former Panama Canal Zone, CZ

Photographic copy of architectural drawing (original drawing located at the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of architectural drawing (original drawing located at the Panama Canal Commission Headquarters Building, Department of Engineering Vault, Balboa Heights, Republic of Panama). First floor plan. - Quarry Heights, Officers' Quarters, Parkinson Lane, Balboa, Former Panama Canal Zone, CZ

Photographic copy of architectural drawing (original drawing located at the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of architectural drawing (original drawing located at the Panama Canal Commission Headquarters Building, Department of Engineering Vault, Balboa Heights, Republic of Panama). Front elevation. - Quarry Heights, Officers' Quarters, Parkinson Lane, Balboa, Former Panama Canal Zone, CZ

Photographic copy of architectural drawing (original drawing located at the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of architectural drawing (original drawing located at the Panama Canal Commission Headquarters Building, Department of Engineering Vault, Balboa Heights, Republic of Panama). Left side elevation. - Quarry Heights, Officers' Quarters, Parkinson Lane, Balboa, Former Panama Canal Zone, CZ

Photographic copy of architectural drawing (original drawing located at the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of architectural drawing (original drawing located at the Panama Canal Commission Headquarters Building, Department of Engineering Vault, Balboa Heights, Republic of Panama), Right side elevation. - Quarry Heights, Officers' Quarters, Parkinson Lane, Balboa, Former Panama Canal Zone, CZ

Photographic copy of architectural drawing (original drawing located at the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of architectural drawing (original drawing located at the Panama Canal Commission Headquarters Building, Department of Engineering Vault, Balboa Heights, Republic of Panama). Second floor plan. - Quarry Heights, Officers' Quarters, Parkinson Lane, Balboa, Former Panama Canal Zone, CZ

1. LOOKING WEST TOWARD OIL/CLEANING SUPPLY BUILDING (SIDING AND ROOF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. LOOKING WEST TOWARD OIL/CLEANING SUPPLY BUILDING (SIDING AND ROOF VISIBLE TO THE LEFT); GAS PUMP SHED IN CENTER (IN SHADOWS). - Standard Lime & Stone Quarry, Oil-Cleaning Supply Building, County Route 27, Millville, Jefferson County, WV

3. VIEW NORTHWEST, PERSPECTIVE OF ABUTMENT AND INCLINED PLANE ON ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. VIEW NORTHWEST, PERSPECTIVE OF ABUTMENT AND INCLINED PLANE ON WEST SIDE OF PA ROUTE 56 - Laurel Hill Quarry, Incline Plane, Both sides of State Route 56, 2.4 miles East of State Route 711, Seward, Westmoreland County, PA

2. VIEW SOUTH, PERSPECTIVE OF ABUTMENT AND INCLINED PLANE ON ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. VIEW SOUTH, PERSPECTIVE OF ABUTMENT AND INCLINED PLANE ON WEST SIDE OF PA ROUTE 56 - Laurel Hill Quarry, Incline Plane, Both sides of State Route 56, 2.4 miles East of State Route 711, Seward, Westmoreland County, PA

18. Detail, typical quarryfaced ashlar blocks, convextooled mortar joints, on ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. Detail, typical quarry-faced ashlar blocks, convex-tooled mortar joints, on pillars in former porte porte cochere area, view to southeast, 135mm lens. - Southern Pacific Depot, 559 El Camino Real, San Carlos, San Mateo County, CA

THERMAL TECHNOLOGY TESTED FOR CONTAMINANT RECOVERY

EPA Science Inventory

A research project on steam enhanced remediation (SER) for the recovery of dense nonaqueous phase liquid (DNAPL) from fractured limestone has been undertaken at the former Loring Air Force Base Quarry site in Limestone, ME. Participants in the project include the Maine Departmen...

Geosites of Lithuania as an environment for dwelling of specific biota: geo- and biodiversity interactions

NASA Astrophysics Data System (ADS)

Skridlaite, Grazina; Motiejunaite, Jurga; Jukoniene, Ilona; Prigodina Lukosiene, Ingrida

2016-04-01

Surface of Lithuania and surrounding countries is sculptured by five glaciations, which left behind morainic tills and melt water deposits, modified by erosion and later used for agriculture or overgrown by wild meadows or forests. The glaciations also left numerous erratic boulders and boulder fields that are declared as natural monuments in Lithuania and surrounding countries. Tens of single boulders and boulder fields are included into the Geosites database at the Lithuanian Geological Survey. Though sparse, but of high scientific value, Devonian, Permian, Triassic and Jurassic outcrops and quarries of Lithuania are variably protected. Quaternary scientists attempted to use single erratic boulders, their fields and abundances in tills to imply glacier dynamics. Some erratics came from known localities in Scandinavia and are called indicator boulders because they show the source and directions of ice sheet movements. Huge single boulders (e.g. 7 m long and 6 m high Puntukas, Anyksciai Regional Park) and wild boulder fields are natural monuments and attractive sites for visitors. Outcrops and quarries of Devonian dolomites and gypsium, Permian limestones and Jurassic sandstones widely used for a scientific research are parts of the protected geo-diversity in the Venta and Birzai regional parks, N and NW Lithuania. On the other hand, a large part of the c. 700 species of lichenized and allied fungi and of c. 500 bryophytes known in Lithuania are confined to natural or semi-natural (quarries) rocky habitats. Eight rock-dwelling lichen and nine bryophyte species are included in the Lithuanian Red Data Book, some of them are known from 1-2 localities or are thought to be extinct now. Besides, the recent investigations of dolomite quarries revealed them to be habitats for 7 bryophyte, 8 lichenized and lichenicolous species, previously unknown for Lithuania. One new lichenicolous species was discovered (Khodosovtsev et al., 2012). Some of the newfinds are rare or absent also in the neighbouring countries. In general, protection of geo-diversity coincides well with protection of narrowly specialized cryptogams, e.g. overgrowing of boulder fields with tall herbs and shrubs also has adversary effect on rock-dwelling lichens. Shading of Devonian outcrops and quarries by trees and shrubs may obscure rocky surfaces and destroy lichens, but favour an establishment of sciophyllous bryophytes. No doubt that cleaning of surfaces of single boulders that are well-known nature monuments prevents an establishment and growth of lichens and bryophytes. However, most of the geological monuments which are subjected to cleaning are situated in localities under strong anthropogenic impact and therefore not suitable for settlement of the rare and protected species. Though conservation conflicts arise even when protecting different species of biota, not to mention conservation of bio- versus geo-diversity, most of the conservation measures for the geoheritage in Lithuania are also suitable for rock-inhabiting lichens and bryophytes. Protection status and measures should be negotiated by bio-and geoscientists, and legislation for bio- and geo-diversity protection should be improved. Khodosovtsev, A., Vondrák, J., Naumovich, A., Kocourková, J., Vondráková, O., Motiejūnaitė, J., 2012. Nova Hedwigia, 95(1-2): 211-220.

7 CFR 330.208 - Courtesy permits.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 5 2011-01-01 2011-01-01 false Courtesy permits. 330.208 Section 330.208 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.107 - Costs.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 5 2012-01-01 2012-01-01 false Costs. 330.107 Section 330.107 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS...

7 CFR 330.110 - Seals.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 5 2012-01-01 2012-01-01 false Seals. 330.110 Section 330.110 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS...

7 CFR 330.107 - Costs.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Costs. 330.107 Section 330.107 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS...

7 CFR 330.107 - Costs.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 5 2014-01-01 2014-01-01 false Costs. 330.107 Section 330.107 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS...

7 CFR 330.208 - Courtesy permits.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 5 2014-01-01 2014-01-01 false Courtesy permits. 330.208 Section 330.208 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.208 - Courtesy permits.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 5 2013-01-01 2013-01-01 false Courtesy permits. 330.208 Section 330.208 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.110 - Seals.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 5 2011-01-01 2011-01-01 false Seals. 330.110 Section 330.110 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS...

7 CFR 330.208 - Courtesy permits.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 5 2012-01-01 2012-01-01 false Courtesy permits. 330.208 Section 330.208 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.208 - Courtesy permits.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Courtesy permits. 330.208 Section 330.208 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.110 - Seals.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 5 2014-01-01 2014-01-01 false Seals. 330.110 Section 330.110 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS...

7 CFR 330.110 - Seals.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Seals. 330.110 Section 330.110 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS...

7 CFR 330.107 - Costs.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 5 2013-01-01 2013-01-01 false Costs. 330.107 Section 330.107 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS...

7 CFR 330.107 - Costs.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 5 2011-01-01 2011-01-01 false Costs. 330.107 Section 330.107 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS...

7 CFR 330.110 - Seals.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 5 2013-01-01 2013-01-01 false Seals. 330.110 Section 330.110 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS...

Perspective view NW by 310. Note the concrete pier extending ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Perspective view NW by 310. Note the concrete pier extending from the bridge in the foreground. This way to allow maximum water flow during floods and rainy periods. - Weaverland Bridge, Quarry Road spanning Conestoga Creek, Terre Hill, Lancaster County, PA

Photographic copy of architectural drawing (original drawing located at the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of architectural drawing (original drawing located at the Panama Canal Commission Headquarters Building, Department of Engineering Vault, Balboa Heights, Republic of Panama). Details of bookshelves and pilasters. - Quarry Heights, Officers' Quarters, Parkinson Lane, Balboa, Former Panama Canal Zone, CZ

7. VIEW WEST, PERSPECTIVE VIEW OF TOP OF INCLINED PLANE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. VIEW WEST, PERSPECTIVE VIEW OF TOP OF INCLINED PLANE AND EAST FACE OF CUT STONE TOWER - Laurel Hill Quarry, Incline Plane, Both sides of State Route 56, 2.4 miles East of State Route 711, Seward, Westmoreland County, PA

Sources Approved for Coverage under the SQCS General Permit in Region 8

EPA Pesticide Factsheets

The sources on Indian country reservation lands that the Region 8 has approved for coverage under the General Air Quality Permit for New and Modified Minor Source Stone Quarrying, Crushing, and Screening Facilities in Indian Country (SQCS General Permit).

Advances in detecting localized road damage due to sinkholes induced by engineering works using high resolution RASARSAT-2 data

NASA Astrophysics Data System (ADS)

Chen, J.; Zebker, H. A.; Lakshmi, V.

2016-12-01

Sinkholes often occur in karst terrains such as found in central and eastern Pennsylvania. Voids produced by dissolution of carbonate rocks can result in soil transport leading to localized, gradual or rapid, sinking of the land surface. A cluster of sinkholes developed in 2000 around a small rural community beside Bushkill creek near a limestone quarry, and severely destroyed road bridges and railway tracks. At a cost of $6 million, the Pennsylvania DoT replaced the bridge, which was damaged again in 2004 by newly developed sinkholes likely associated with quarry's pumping activity. Here we present high-resolution spaceborne interferometric radar images of sinkhole development on this community. We show that this technique may be used to monitor regions with high sinkhole damage risk and assist future infrastructure route planning, especially in rural areas where hydrogeologic information is limited. Specifically, we processed 66 RADARSAT-2 interferograms to extract deformation occurred over Bushkill creek between Jun. 2015 and Mar. 2016 with a temporal resolution of 24 days. We advanced recent persistent scatterer techniques to preserve meter-level spatial resolution in the interferograms while minimizing temporal decorrelation and phase unwrapping error. We observe periodic deformation due to pumping activity at the quarry and localized subsidence along Bushkill creek that is co-located with recent reported sinkholes. We plan to use the automatic processing techniques developed for this study to study road damage in another region in Pennsylvania, along Lewiston Narrows, and also to monitor urban infrastructure improvements in Seattle, both again with RASARSAT-2 data. Our results demonstrate that recent advances in satellite geodesy can be transferred to benefit society beyond the science community.

Lithofacies variation across the Mammoth Cave-Pope Megagroup boundary -- a sequence stratigraphic approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDonald, T.A.; Tabor, E.; Marzolf, J.E.

1994-04-01

Regional stratigraphic relations in southern Illinois suggest a major unconformity near the top of the St. Genevieve Limestone. Large exposures below the unconformity within the Anna quarries display a retrogradational parasequence-stacking pattern. Eight to 12 m-thick parasequences comprise thinning-upward marine bioclastic wackestone overlain by oolitic and bioclastic thickening-upward eolian( ) grainstone. An eolian origin for the bioclastic grainstones is supported by large scale cross stratification (0.5 to 2 m-thick sets), reworked character of rounded, coated bioclasts, and preserved duneforms. At the quarries, the unconformity is directly overlain by mudstones and sandstones. Thinning-upward mudstones interbedded with very thin (1 to 3more » cm thick) intraclastic packstone tempestites crop out in a roadcut about 500 m NE of the quarries. Small-scale ripples and absence of trace fossils in lower mudstone units suggest an estuarine or lagoonal, brackish-waver environment. The trace fossil Conostichus and horizontal burrows appear abruptly in the upper, thin mudstone units. Highly bioturbated green and red shales overlying a 1 to 4 m-thick covered interval in a roadcut 610 m farther north are interbedded with tidally deposited, medium- to coarse-grained, bioclastic grainstones. The shale-draped, medium cross-bedded grainstones document ten or more tidal bundles. The cross-bedded grainstone is overlain by wavy- to flaser-bedded very fine-grained sandstone suggestive of sand flat origin. These sandstones are overlain by the Aux Vases Sandstone. Numerous low-angle bounding surfaces within the Aux Vases enclose low-angle, wedge-planar cross-bedding. A single irregular surface coated by a few centimeters of poorly sorted unstratified sandstone defines a ravinement surface near the base of the Aux Vases Sandstone.« less

Death in the New Town: Edinburgh's hidden story of stonemasons' silicosis.

PubMed

Donaldson, K; Wallace, W A; Henry, C; Seaton, A

2017-12-01

The building of the Edinburgh New Town, from the mid-18th to the mid-19th centuries, was a major advance in harmonious and elegant town planning. However, there is anecdotal evidence that it led to the occurrence of an epidemic of silicosis/tuberculosis among the stonemasons. We have reviewed contemporary accounts of the episode and early records of the understanding of silicosis. We have also studied the lung of a contemporary stonemason, preserved in the museum of the Royal College of Surgeons of Edinburgh, and confirmed the presence of silico-tuberculosis in it. The evidence shows that a major epidemic did occur, caused by a combination of factors. The size of the undertaking attracted many stonemasons to Edinburgh over a period of almost 100 years, intensively cutting and dressing stone. The principal stone worked was a very high-quartz sandstone, derived from the local Craigleith quarry, having properties that made it desirable for prestige buildings. However, even before the construction of the New Town, Craigleith sandstone was notorious for its dustiness and the Edinburgh stonemasons worked the stone in unventilated sheds. Stonemasons appeared to be aware of the risk of their trade, but little was known about preventive measures. It appears it was assumed that the risks to stonemasons disappeared after the Craigleith quarry closed, the employers emphasising (without evidence) the lack of health risks in other quarries, and the tragic episode appears to have been forgotten. However, we point to the continuing occurrence of silicosis among stonemasons to the present day; the importance of remembering such episodes is stressed lest the lessons of the past be forgotten.

Public perception of risk and its consequences: the case of a natural fibrous mineral deposit.

PubMed

Major, G; Vardy, G F

1989-01-01

A public authority building a breakwater and other harbour facilities at a small seaport (population 3000) had short-term requirements for 261,000 tonnes of rock and ultimately for 1,000,000 tonnes. A suitable quarry was found about 11 km from the port but unfortunately the rock was found to be contaminated to a small extent with a fibrous mineral identified with the analytical transmission electron microscope as a non-commercial type of fine amphibole with many long fibres. Quarrying only was intended and there were no plans to crush the rock, but the projected work soon brought complaints from local residents, who expressed fears concerning risks to health from what soon became known as 'the asbestos mine'. These complaints posed a dilemma for both the construction and health authorities; they were forcefully expressed, and residents were supported by local newspapers, municipal authorities and regional politicians. The Land and Environment Court ordered (by consent) that the construction authority 'take all reasonable measures to ensure that no loose asbestos material and no rock with any asbestos material exposed on the surface (is) removed from the site'. Personal monitoring of quarry workmen by the membrane filter method and ambient air monitoring near residents' homes with analysis by electron microscope showed that only insignificant concentrations of airborne fibres were present. The breakwater was ultimately completed after much delay and extra expense. Other and greater risks to health and safety, such as the transport of liquid chlorine through the centre of the town to the fish processing plant and the storage, distribution and transport of petroleum products from the nearby regional facilities, were not perceived as such by the residents.

The growth of pines germinated from woodchip mulch in restored soils from semiarid SE Spain quarries is enhanced by organic amendments

NASA Astrophysics Data System (ADS)

Luna Ramos, Lourdes; Miralles, Isabel; Lázaro-Suau, Roberto; Solé-Benet, Albert

2017-04-01

The use of pine woodchips in soil restoration in calcareous quarries is a relatively low-cost mulching technique to improve soil water conservation and decrease soil erosion, contributing to improve soil quality. Besides these two important effects, woodchip mulch is also a potential source of seeds which can germinate if environmental conditions during earlier stages are adequate. Pine germination has been observed in experimental plots treated with pine woodchips used as mulch in one of the driest regions in Europe (SE Spain). This side-effect provided an interesting opportunity to analyse the influence of topsoil and two organic wastes (compost from domestic organic waste and sewage sludge from urban water treatment plant) in mine soils on the germinated pines (Pinus halepensis Mill.) and the plant cover (revegetated native plants and spontaneous vegetation). Number, height and basal diameter of pines and the total plant cover were measured 6 years after the applications of topsoil and organic amendments. Results showed that organic wastes increased the pine growth and the total plant cover which could favour in turn the physico-chemical soil properties and its quality in the medium-long term. However, organic amendments negatively influencing the number of germinated pines. The likely growth of pine seedlings derived from the pine cones which come with pine woodchips used as mulch, when enhanced by organic amendments, adds a positive value in quarry restoration even under very dry climatic conditions. However, it is necessary to continue monitoring the development of vegetation to form a more precise idea about whether the development of the pines is globally beneficial, since the pines could outcompete the local native plants.

Weldon Spring Site environmental report for calendar year 1993. Weldon Springs Site Remedial Action Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-05-01

This Site Environmental Report for Calendar Year 1993 describes the environmental monitoring programs at the Weldon Spring Site Remedial Action Project (WSSRAP). The objectives of these programs are to assess actual or potential exposure to contaminant effluents from the project area by providing public use scenarios and dose estimates, to demonstrate compliance with Federal and State permitted levels, and to summarize trends and/or changes in contaminant concentrations from environmental monitoring program. In 1993, the maximum committed dose to a hypothetical individual at the chemical plant site perimeter was 0.03 mrem (0.0003 mSv). The maximum committed dose to a hypothetical individualmore » at the boundary of the Weldon Spring Quarry was 1.9 mrem (0.019 mSv). These scenarios assume an individual walking along the perimeter of the site-once a day at the chemical plant/raffinate pits and twice a day at the quarry-250 days per year. This hypothetical individual also consumes fish, sediment, and water from lakes and other bodies of water in the area. The collective dose, based on an effected population of 112,000 was 0.12 person-rem (0.0012 person-Sv). This calculation is based on recreational use of the August A. Busch Memorial Conservation Area and the Missouri Department of Conservation recreational trail (the Katy Trail) near the quarry. These estimates are below the U.S. Department of Energy requirement of 100 mrem (I mSv) annual committed effective dose equivalent for all exposure pathways. Results from air monitoring for the National Emission Standards for Hazardous Air Pollutants (NESHAPs) program indicated that the estimated dose was 0.38 mrem, which is below the U.S. Environmental Protection Agency (EPA) standard of 10 mrem per year.« less

Thermal history of volcanic debris flow deposits on the eastern flanks of Mt. Taranaki, New Zealand: Implications for future hazards

NASA Astrophysics Data System (ADS)

Turner, Gillian M.; Alloway, Brent V.; Dixon, Benjamin J.; Atkins, Cliff B.

2018-03-01

We use palaeomagnetic methods to decipher the thermal histories of a succession of massive to weakly stratified debris flow deposits (Ngatoro and Te Popo formations) of late Holocene age located on the eastern lower flanks of Mt. Taranaki/Egmont Volcano, western North Island, New Zealand. Results from two sites, Vickers Quarry and Surrey Road Quarry, both c. 9.6 km from the present-day summit, enable us to distinguish between clast incorporation temperatures of about 400 °C and emplacement temperatures between 150 and 200 °C, consistent with observation of superficial charring and desiccation of outer podocarp-hardwood tree trunks at Vickers Quarry. Analysis of palaeomagnetic directions and lithofacies architecture suggest that these deposits were likely initiated as a closely-spaced succession of block-and-ash flows (BAFs) that rapidly cooled as they descended the volcano flanks. Radiocarbon chronology and the widespread occurrence of a palaeosol between the products of the preceding Inglewood eruptive phase, c. 3.4 cal. ka B.P., and the overlying Ngatoro Formation suggest that these two events are temporally unrelated. Certainly, there is no field evidence of contemporaneous explosive volcanic activity that might be related to the emplacement of Ngatoro Formation. However, we suggest that these low-temperature deposits might either relate to collapse of a small emergent lava dome or a cooling dome remnant, possibly emplaced in the aftermath of the Inglewood eruption. How collapse was initiated remains uncertain: the remnant dome may have been rendered unstable by volcano-tectonic or tectonic seismic events and/or by adverse meteorological events. Nevertheless, this study demonstrates that edifice collapse events generating potentially hazardous debris flows can occur independent of specific eruptive activity.

7 CFR 330.104 - Ports of entry.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 5 2014-01-01 2014-01-01 false Ports of entry. 330.104 Section 330.104 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.104 - Ports of entry.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 5 2013-01-01 2013-01-01 false Ports of entry. 330.104 Section 330.104 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.104 - Ports of entry.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Ports of entry. 330.104 Section 330.104 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.104 - Ports of entry.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 5 2011-01-01 2011-01-01 false Ports of entry. 330.104 Section 330.104 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

7 CFR 330.104 - Ports of entry.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 5 2012-01-01 2012-01-01 false Ports of entry. 330.104 Section 330.104 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

8. COLLAPSED AND SCATTERED BUILDING ON FLOOR OF PIT, WITH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. COLLAPSED AND SCATTERED BUILDING ON FLOOR OF PIT, WITH PILE OF RHYOLITE BOULDERS IN BACKGROUND, VIEW TO SOUTH - Iron Springs Quarry, 150 feet west of Grand Loop Road, 20 miles east of U.S. Highway 287, West Thumb, Teton County, WY

Numerical Simulation of Quarry Blast Sources

DTIC Science & Technology

1993-01-01

Phillips Laboratory (PL/PKVA) AGENCY REPORT NUMBER 3701 N. Fairfax Dr. #717 3651 Lowry Avenue, SE Arlington, VA 2203-1714 Kirtland, AFB, NM 87117...Freeman and Company, San Francisco. Smith, A. T. (1992), "Discrimination of Explosions from Simultaneous Mining Blasts," Lawrence Livermore Report UCRL

7 CFR 330.108 - Authority to issue administrative instructions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE General Provisions § 330.108 Authority to issue... plant pests into the United States or interstate. In addition, whenever the Deputy Administrator shall...

STREAM INJECTION INTO FRACTURE BEDROCK AT LORING AFB

EPA Science Inventory

The Quarry at the former Loring Air Force Base in Limestone, Maine, was used for the disposal of drums containing spent chlorinated solvents, mainly tetrachloroethene (PCE). After closure of the base, surface geophysics were used to locate the drums, and they were removed. Subs...

4. VIEW EAST, PERSPECTIVE DOWN INCLINED PLANE FROM TOP OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. VIEW EAST, PERSPECTIVE DOWN INCLINED PLANE FROM TOP OF ABUTMENT TO CONEMAUGH RIVER AND AREA OF LOWER INCLINE - Laurel Hill Quarry, Incline Plane, Both sides of State Route 56, 2.4 miles East of State Route 711, Seward, Westmoreland County, PA

Hazardous Waste Cleanup: Frontier Chemical Waste Process Incorporated in Pendleton, New York

EPA Pesticide Factsheets

Frontier Chemical Waste Process, Inc. is located at 7025 Townline Road, Pendleton, New York. This site was used for the treatment of industrial wastes from 1959 to 1974, with many wastes being discharged to the lake on the property (Quarry Lake).

NORSAR detection processing system

NASA Astrophysics Data System (ADS)

Loughran, L. B.

1987-05-01

This Semiannual Technical Summary describes the operation, maintenance and research activities at the Norwegian Seismic Array (NORSAR). Investigations into further potential improvements in the NORSAR array processing system have continued. A new Detection Processor (DP) program has developed and tested in an off-line mode. This program is flexible enough to conduct both NORSAR and NORESS detection processing as is done today, besides incorporating improved algorithms. A wide-band slowness estimation technique has been investigated by processing data from several events from the same location. Ten quarry blasts at a dam construction site in western Russia and sixteen Semipalatinsk nuclear explosions were selected. The major conclusion from this study is that employing a wider frequency band clearly tends to increase the stability of the slowness estimates, provided the signal-to-noise ratio is adequate over the band of interest. The stability was found, particularly for Pn, to be remarkably good for the western Norway quarry blasts when using a fixed frequency band for each phase for all ten events.

Preliminary Geological Findings on the BP-1 Simulant

NASA Technical Reports Server (NTRS)

Stoeser, D. B.; Rickman, D. L.; Wilson, S.

2010-01-01

A waste material from an aggregate producing quarry has been used to make an inexpensive lunar simulant called BP-1. The feedstock is the Black Point lava flow in northern Arizona. Although this is part of the San Francisco volcanic field, which is also the source of the JSC-1 series feedstock, BP-1 and JSC-1 are distinct. Chemically, the Black Point flow is an amygdaloidal nepheline-bearing basalt. The amygdules are filled with secondary minerals containing opaline silica, calcium carbonate, and ferric iron minerals. X-ray diffraction (XRD) detected approximately 3% quartz, which is in line with tests done by the Kennedy Space Center Industrial Hygiene Office. Users of this material should use appropriate protective equipment. XRD also showed the presence of significant halite and some bassanite. Both are interpreted to be evaporative residues due to recycling of wash water at the quarry. The size distribution of BP-1 may be superior to some other simulants for some applications.

Use Of limestone resources in flue-gas desulfurization power plants in the Ohio River Valley

USGS Publications Warehouse

Foose, M.P.; Barsotti, A.F.

1999-01-01

In 1994, more than 41 of the approximately 160 coal-fired, electrical- power plants within the six-state Ohio River Valley region used flue-gas desulfurization (FGD) units to desulfurize their emissions, an approximately 100% increase over the number of plants using FGD units in 1989. This increase represents a trend that may continue with greater efforts to meet Federal Clean Air Act standards. Abundant limestone resources exist in the Ohio River Valley and are accessed by approximately 975 quarries. However, only 35 of these are believed to have supplied limestone for FGD electrical generating facilities. The locations of these limestone suppliers do not show a simple spatial correlation with FGD facilities, and the closest quarries are not being used in most cases. Thus, reduction in transportation costs may be possible in some cases. Most waste generated by FGD electrical-generating plants is not recycled. However, many FGD sites are relatively close to gypsum wallboard producers that may be able to process some of their waste.

If it bleeds, it leads: the construction of workplace injury in Canadian newspapers, 2009-2014.

PubMed

Barnetson, Bob; Foster, Jason

2015-01-01

Public perceptions of workplace injuries are shaped by media reports, but the accuracy of such reports is unknown. This study identifies differences between workers' compensation claims data and newspaper reports of workplace injuries in Canadian newspapers and media sources. This study applies quantitative content analysis to 245 Canadian English-language newspaper articles from 2009 to 2014. Workers' compensation claims data is drawn from the Association of Workers' Compensation Boards of Canada. Newspapers dramatically overreport fatalities, injuries to men, injuries in the construction and mining/quarrying/oil industries, injuries stemming from contact with objects/equipment and fires/explosions, and acute physical injuries such as burns, fractures, intracranial injuries, and traumatic injuries. Newspaper reporters tend to rely upon government, police/firefighter, and employer accounts, rarely recounting the perspectives of workers. Newspapers overreported fatalities, injuries to men, and injuries in the construction and mining/quarrying/oil industries. This results in a misleading picture of occupational injuries in Canada.

If it bleeds, it leads: the construction of workplace injury in Canadian newspapers, 2009–2014

PubMed Central

Barnetson, Bob; Foster, Jason

2015-01-01

Background: Public perceptions of workplace injuries are shaped by media reports, but the accuracy of such reports is unknown. Objective: This study identifies differences between workers' compensation claims data and newspaper reports of workplace injuries in Canadian newspapers and media sources. Methods: This study applies quantitative content analysis to 245 Canadian English-language newspaper articles from 2009 to 2014. Workers' compensation claims data is drawn from the Association of Workers' Compensation Boards of Canada. Results: Newspapers dramatically overreport fatalities, injuries to men, injuries in the construction and mining/quarrying/oil industries, injuries stemming from contact with objects/equipment and fires/explosions, and acute physical injuries such as burns, fractures, intracranial injuries, and traumatic injuries. Newspaper reporters tend to rely upon government, police/firefighter, and employer accounts, rarely recounting the perspectives of workers. Conclusion: Newspapers overreported fatalities, injuries to men, and injuries in the construction and mining/quarrying/oil industries. This results in a misleading picture of occupational injuries in Canada. PMID:26070326

The ratio between corner frequencies of source spectra of P- and S-waves—a new discriminant between earthquakes and quarry blasts

NASA Astrophysics Data System (ADS)

Ataeva, G.; Gitterman, Y.; Shapira, A.

2017-01-01

This study analyzes and compares the P- and S-wave displacement spectra from local earthquakes and explosions of similar magnitudes. We propose a new approach to discrimination between low-magnitude shallow earthquakes and explosions by using ratios of P- to S-wave corner frequencies as a criterion. We have explored 2430 digital records of the Israeli Seismic Network (ISN) from 456 local events (226 earthquakes, 230 quarry blasts, and a few underwater explosions) of magnitudes Md = 1.4-3.4, which occurred at distances up to 250 km during 2001-2013 years. P-wave and S-wave displacement spectra were computed for all events following Brune's source model of earthquakes (1970, 1971) and applying the distance correction coefficients (Shapira and Hofstetter, Teconophysics 217:217-226, 1993; Ataeva G, Shapira A, Hofstetter A, J Seismol 19:389-401, 2015), The corner frequencies and moment magnitudes were determined using multiple stations for each event, and then the comparative analysis was performed.

7. DETAIL, LOOKING SOUTH, INTERIOR OF SOUTH ARCH, SHOWING DRAINAGE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. DETAIL, LOOKING SOUTH, INTERIOR OF SOUTH ARCH, SHOWING DRAINAGE HOLE IN THE WEST END OF THE SOUTH WALL AND VERTICAL QUARRY DRILLING HOLES ON THE STONE FACE - Mulladay Hollow Bridge, Spanning Mulladay Hollow Creek at County Road No.61, Eureka Springs, Carroll County, AR

78 FR 13621 - Forest Service

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-28

... expansions, will add an additional 20 years life to the Sentinel Quarry, add an additional 40 years life to... requirements of both the National Environmental Policy Act (NEPA) and the California Environmental Quality Act... and that they are effective in protecting the environment. Inspections will occur during the life of...

29 CFR 776.15 - “Production.”

Code of Federal Regulations, 2014 CFR

2014-07-01

... such goods, or in any closely related process or occupation directly essential to the production... of such goods, 55 and include those whose work is closely related and directly essential thereto, 56... exclusively, this includes that large group of employees engaged in mines, oil fields, quarries, and...

29 CFR 776.15 - “Production.”

Code of Federal Regulations, 2012 CFR

2012-07-01

... such goods, or in any closely related process or occupation directly essential to the production... of such goods, 55 and include those whose work is closely related and directly essential thereto, 56... exclusively, this includes that large group of employees engaged in mines, oil fields, quarries, and...

29 CFR 776.15 - “Production.”

Code of Federal Regulations, 2013 CFR

2013-07-01

... such goods, or in any closely related process or occupation directly essential to the production... of such goods, 55 and include those whose work is closely related and directly essential thereto, 56... exclusively, this includes that large group of employees engaged in mines, oil fields, quarries, and...

Equipment Operator 1 & C.

ERIC Educational Resources Information Center

Naval Education and Training Program Development Center, Pensacola, FL.

The Rate Training Manual and Nonresident Career Course (RTM/NRCC) form a self-study package to assist Navy Equipment Operators First and Chief in fulfilling the requirements of their rating. (Navy Equipment Operators First and Chief direct and coordinate efforts of individuals and crews in construction, earthmoving, roadbuilding, quarrying, and…

Be a Citizen Scientist!: Celebrate Earth Science Week 2006

ERIC Educational Resources Information Center

Benbow, Ann E.; Camphire, Geoff

2006-01-01

During Earth Science Week (October 8-14, 2006), millions of citizen scientists worldwide will be sampling groundwater, monitoring weather, touring quarries, exploring caves, preparing competition projects, and visiting museums and science centers to learn about Earth science. The American Geological Institute organizes this annual event to…

Photographic copy of photograph, ca. 1924 (original print located in ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of photograph, ca. 1924 (original print located in the Construction Inventory Book at the Directorate of Engineering and Housing, U.S. Army Garrison-Panama, Corozal, Republic of Panama). East front. - Quarry Heights, Officers' Quarters, Parkinson Lane, Balboa, Former Panama Canal Zone, CZ

78 FR 19523 - General Management Plan, Draft Environmental Impact Statement, Lake Meredith National Recreation...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-01

... Management Plan, Draft Environmental Impact Statement, Lake Meredith National Recreation Area and Alibates... Management Plan, Lake Meredith National Recreation Area and Alibates Flint Quarries National Monument, Texas... management alternatives for Lake Meredith National Recreation Area and three management alternatives for...

Environmentalism and natural aggregate mining

USGS Publications Warehouse

Drew, L.J.; Langer, W.H.; Sachs, J.S.

2002-01-01

Sustaining a developed economy and expanding a developing one require the use of large volumes of natural aggregate. Almost all human activity (commercial, recreational, or leisure) is transacted in or on facilities constructed from natural aggregate. In our urban and suburban worlds, we are almost totally dependent on supplies of water collected behind dams and transported through aqueducts made from concrete. Natural aggregate is essential to the facilities that produce energy-hydroelectric dams and coal-fired powerplants. Ironically, the utility created for mankind by the use of natural aggregate is rarely compared favorably with the environmental impacts of mining it. Instead, the empty quarries and pits are seen as large negative environmental consequences. At the root of this disassociation is the philosophy of environmentalism, which flavors our perceptions of the excavation, processing, and distribution of natural aggregate. The two end-member ideas in this philosophy are ecocentrism and anthropocentrism. Ecocentrism takes the position that the natural world is a organism whose arteries are the rivers-their flow must not be altered. The soil is another vital organ and must not be covered with concrete and asphalt. The motto of the ecocentrist is "man must live more lightly on the land." The anthropocentrist wants clean water and air and an uncluttered landscape for human use. Mining is allowed and even encouraged, but dust and noise from quarry and pit operations must be minimized. The large volume of truck traffic is viewed as a real menace to human life and should be regulated and isolated. The environmental problems that the producers of natural aggregate (crushed stone and sand and gravel) face today are mostly difficult social and political concerns associated with the large holes dug in the ground and the large volume of heavy truck traffic associated with quarry and pit operations. These concerns have increased in recent years as society's demand for living space has encroached on the sites of production; in other words, the act of production has engendered condemnation. Many other environmental problems that are associated with dust and noise and blasting from quarry and pit operations have been reduced through the efficient use of technology. Recycling concrete in buildings, bridges, and roads and asphaltic pavements will ultimately reduce the demand for virgin natural aggregate. The impact created by the large holes in the ground required for the mining of natural aggregate can be greatly reduced by planning their reclamation before mining begins. ?? 2002 International Association for Mathematical Geology.

7 CFR 330.100 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY... composing part of the surface of the globe, in distinction from the firm rock, and including the soil and subsoil, as well as finely divided rock and other soil formation materials down to the rock layer. Garbage...

7 CFR 330.100 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY... composing part of the surface of the globe, in distinction from the firm rock, and including the soil and subsoil, as well as finely divided rock and other soil formation materials down to the rock layer. Garbage...

7 CFR 330.100 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY... composing part of the surface of the globe, in distinction from the firm rock, and including the soil and subsoil, as well as finely divided rock and other soil formation materials down to the rock layer. Garbage...

7 CFR 330.100 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY... composing part of the surface of the globe, in distinction from the firm rock, and including the soil and subsoil, as well as finely divided rock and other soil formation materials down to the rock layer. Garbage...

7 CFR 330.100 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY... composing part of the surface of the globe, in distinction from the firm rock, and including the soil and subsoil, as well as finely divided rock and other soil formation materials down to the rock layer. Garbage...

Community response to blasting.

PubMed

Fidell, S; Horonjeff, R; Schultz, T; Teffeteller, S

1983-09-01

Annoyance due to chronic exposure to blast noise and vibration was assessed in residential areas near two surface mines and a quarry. It was found possible to base useful prediction of the prevalence of high annoyance on a metric of outdoor ground vibration related to high centiles of the long term distribution of exposure levels.

China Report, Economic Affairs

DTIC Science & Technology

1985-02-11

meters of glazed tiles, as well as quarried stone and cutlery , according to project officials. The venture is organized by three companies in Tianjin...were the amount of crude oil up by 42.7 percent and refxned oxl by 16.4 percent. The amount of goods exported last year including gram, edible oil

Shared Governance at Lincoln University: An Elusive Quarry

ERIC Educational Resources Information Center

DeBoy, James L.

2015-01-01

This paper identifies those factors that led to American Association of University Professors (AAUP) representation at the nation's oldest degree-granting Historically Black College University (HBCU). In the span of 18 months, Lincoln Faculty overwhelmingly embraced unionism when the body agreed to have AAUP as its official agent in the collective…

A Dictionary of Mining, Mineral and Related Terms.

ERIC Educational Resources Information Center

Thrush, Paul W., Comp.

This dictionary contains about 55,000 terms with approximately 150,000 definitions. These terms are of both a technical and local nature and apply to metal mining, coal mining, quarrying, geology, metallurgy, ceramics and clays, glassmaking, minerals and mineralogy, and general terminology. Petroleum, natural gas, and legal mining terminology,…

26 CFR 509.111 - Real property income and natural resource royalties.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 19 2012-04-01 2010-04-01 true Real property income and natural resource... and natural resource royalties. (a) General. Income of whatever nature derived by a nonresident alien... from such property, and royalties in respect of the operation of mines, quarries, or other natural...

26 CFR 509.111 - Real property income and natural resource royalties.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 26 Internal Revenue 19 2014-04-01 2010-04-01 true Real property income and natural resource... and natural resource royalties. (a) General. Income of whatever nature derived by a nonresident alien... from such property, and royalties in respect of the operation of mines, quarries, or other natural...

26 CFR 509.111 - Real property income and natural resource royalties.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 19 2013-04-01 2010-04-01 true Real property income and natural resource... and natural resource royalties. (a) General. Income of whatever nature derived by a nonresident alien... from such property, and royalties in respect of the operation of mines, quarries, or other natural...

40 CFR 52.2276 - Control strategy and regulations: Particulate matter.

Code of Federal Regulations, 2010 CFR

2010-07-01

... its limestone quarry facilities near New Braunfels, Comal County, Texas shall install fabric filters... of the fabric filters, Parker Brothers and Co., Inc., shall not emit particulate matter in excess of 0.03 grains per standard cubic foot from the exhaust stack of the fabric filter on its primary...

40 CFR 52.2276 - Control strategy and regulations: Particulate matter.

Code of Federal Regulations, 2013 CFR

2013-07-01

... its limestone quarry facilities near New Braunfels, Comal County, Texas shall install fabric filters... of the fabric filters, Parker Brothers and Co., Inc., shall not emit particulate matter in excess of 0.03 grains per standard cubic foot from the exhaust stack of the fabric filter on its primary...

40 CFR 52.2276 - Control strategy and regulations: Particulate matter.

Code of Federal Regulations, 2012 CFR

2012-07-01

... its limestone quarry facilities near New Braunfels, Comal County, Texas shall install fabric filters... of the fabric filters, Parker Brothers and Co., Inc., shall not emit particulate matter in excess of 0.03 grains per standard cubic foot from the exhaust stack of the fabric filter on its primary...

7 CFR 330.200 - Movement of plant pests regulated; permits required.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Movement of plant pests regulated; permits required... AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Plant Pests § 330.200 Movement of...

7 CFR 330.202 - Consideration of applications for permits to move plant pests.

Code of Federal Regulations, 2010 CFR

2010-01-01

... plant pests. 330.202 Section 330.202 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Plant Pests § 330.202...

7 CFR 330.204 - Denial or cancellation of permits; reconsiderations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Plant Pests § 330.204 Denial or... to move a plant pest when, in his opinion, such movement would involve a danger of dissemination of...

Stabilization techniques for reactive aggregate in soil-cement base course.

DOT National Transportation Integrated Search

2003-01-01

Anhydrite (CaSO4) beds occur as a cap rock on a salt dome in Winn Parish in north Louisiana. Locally known as Winn Rock, it has been quarried for gravel for road building. It has been used as a surface course for local parish and logging roads. Stabi...

Computer visualizations in engineering applications

NASA Astrophysics Data System (ADS)

Bills, K. C.

The use of computerized simulations of various robotic tasks via IGRIP software is reported. The projects include underwater activities demonstrating clean up of a quarry; time study of methods to store waste drums inside a facility; design walk-through of a new facility; plant layout flyover; and conceptual development and layout of new mechanisms.

26 CFR 509.111 - Real property income and natural resource royalties.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 19 2010-04-01 2010-04-01 false Real property income and natural resource... and natural resource royalties. (a) General. Income of whatever nature derived by a nonresident alien... from such property, and royalties in respect of the operation of mines, quarries, or other natural...

26 CFR 509.111 - Real property income and natural resource royalties.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 19 2011-04-01 2010-04-01 true Real property income and natural resource... and natural resource royalties. (a) General. Income of whatever nature derived by a nonresident alien... from such property, and royalties in respect of the operation of mines, quarries, or other natural...

77 FR 55420 - Minerals Management: Adjustment of Cost Recovery Fees

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-10

... mining, oil and gas extraction, and the mining and quarrying of nonmetallic minerals) as an individual...\\ New value \\4\\ New fee \\5\\ Oil & Gas (parts 3100, 3110, 3120, 3130, 3150) Noncompetitive lease... Leasing of Solid Minerals Other Than Coal and Oil Shale (parts 3500, 3580) Applications other than those...

75. Photographic copy of historic photo, September 25, 1935 (original ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

75. Photographic copy of historic photo, September 25, 1935 (original print filed in Record Group 115, National Archives, Washington, D.C.). CCC CREW WORKING ON ROAD AND QUARRY TO SUPPLY ROCK FOR REFACING DEER FLAT RESERVOIR DAM. - Boise Project, Deer Flat Embankments, Lake Lowell, Nampa, Canyon County, ID

Serpentinitic waste materials: possible reuses and critical issues

NASA Astrophysics Data System (ADS)

Cavallo, Alessandro

2017-04-01

The extraction and processing of marbles, rocks and granites produces a significant amount of waste materials, in the form of shapeless blocks, scraps, gravel and sludge. Current regulations and a greater concern to the environment promote the reuse of these wastes: quartz-feldspathic materials are successfully used for ceramics, crushed porphyry as track ballast, whereas carbonatic wastes for lime, cement and fillers. However, there are currently no reuses for serpentinitic materials: a striking example is represented by the Valmalenco area (central Alps, northern Italy), a relatively small productive district. In this area 22 different enterprises operate in the quarrying and/or processing of serpentinites with various textures, schistose to massive, and color shades; the commercial products are used all over the world and are known with many commercial names. The total volume extracted in the quarries is estimated around 68000 m3/yr. and the resulting commercial blocks and products can be estimated around the 40 - 50 % of the extracted material. The processing wastes can vary significantly according to the finished product: 35 % of waste can be estimated in the case of slab production, whereas 50 % can be estimated in the case of gang-saw cutting of massive serpentinite blocks. The total estimate of the processing rock waste in the Valmalenco area is about 12700 m3/yr; together with the quarry waste, the total amount of waste produced in the area is more than 43000 m3/yr. The sludge (approximately 12000 m3/yr, more than 95 % has grain size < 50 micron) mainly derives from the cutting (by diamond disk and gang-saw) and polishing of massive serpentinites; it is filter-pressed before disposal (water content ranging from 11.5 to 19.4 wt. %). All the different waste materials (85 samples) were characterized by quantitative XRPD (FULLPAT software), whole-rock geochemistry (ICP-AES, ICP-MS and Leco®) and SEM-EDS. The mineralogical composition is quite variable from quarry to quarry, with abundant antigorite (up to 90 wt. %) and olivine (up to 38 wt. %), and variable contents of diopside, chlorite, magnetite, chromite and brucite. The chemical composition reflects the protolith: MgO 35.1 - 42.7 wt. %, SiO2 38.8 - 42.3 wt. %, Fe2O3 7.1 - 8.8 wt. %, Al2O3 0.9 - 2.8 wt. %, CaO 0.2 - 3.1 wt. %, Cr2O3 0.26 - 0.35 wt. %, Ni 1800 - 2100 ppm; little differences can be observed in trace elements. SEM-EDS investigations evidenced little amounts of chrysotile asbestos fibers (generally < 1000 ppm, mean values 200 - 400 ppm), deriving from cracks, fissures and veins of the waste blocks. Very few published studies on the reuse of serpentinitic wastes can be found. Finely ground antigorite-rich materials could be used as filler for plastics (instead of talc), whereas olivine-rich wastes as a reactive fixing carbon dioxide (as carbonates) released during the use of fossil fuels. In the ceramic industry, the most promising target is represented by forsterite and/or high-MgO ceramics and forsterite refractories (with periclase addition), but also by cordierite ceramics (adding kaolin) and high-hardness vitroceramics. The real possibility of an industrial use of serpentinitic materials will require much more experimental work, because no relevant previous studies are available. Special care must be taken to avoid chrysotile asbestos contamination.

Analytical and numerical simulation of the steady-state hydrologic effects of mining aggregate in hypothetical sand-and-gravel and fractured crystalline-rock aquifers

USGS Publications Warehouse

Arnold, L.R.; Langer, William H.; Paschke, Suzanne Smith

2003-01-01

Analytical solutions and numerical models were used to predict the extent of steady-state drawdown caused by mining of aggregate below the water table in hypothetical sand-and-gravel and fractured crystalline-rock aquifers representative of hydrogeologic settings in the Front Range area of Colorado. Analytical solutions were used to predict the extent of drawdown under a wide range of hydrologic and mining conditions that assume aquifer homogeneity, isotropy, and infinite extent. Numerical ground-water flow models were used to estimate the extent of drawdown under conditions that consider heterogeneity, anisotropy, and hydrologic boundaries and to simulate complex or unusual conditions not readily simulated using analytical solutions. Analytical simulations indicated that the drawdown radius (or distance) of influence increased as horizontal hydraulic conductivity of the aquifer, mine penetration of the water table, and mine radius increased; radius of influence decreased as aquifer recharge increased. Sensitivity analysis of analytical simulations under intermediate conditions in sand-and-gravel and fractured crystalline-rock aquifers indicated that the drawdown radius of influence was most sensitive to mine penetration of the water table and least sensitive to mine radius. Radius of influence was equally sensitive to changes in horizontal hydraulic conductivity and recharge. Numerical simulations of pits in sand-and- gravel aquifers indicated that the area of influence in a vertically anisotropic sand-and-gravel aquifer of medium size was nearly identical to that in an isotropic aquifer of the same size. Simulated area of influence increased as aquifer size increased and aquifer boundaries were farther away from the pit, and simulated drawdown was greater near the pit when aquifer boundaries were close to the pit. Pits simulated as lined with slurry walls caused mounding to occur upgradient from the pits and drawdown to occur downgradient from the pits. Pits simulated as refilled with water and undergoing evaporative losses had little hydro- logic effect on the aquifer. Numerical sensitivity analyses for simulations of pits in sand-and-gravel aquifers indicated that simulated head was most sensitive to horizontal hydraulic conductivity and the hydraulic conductance of general-head boundaries in the models. Simulated head was less sensitive to riverbed conductance and recharge and relatively insensitive to vertical hydraulic conductivity. Numerical simulations of quarries in fractured crystalline-rock aquifers indicated that the area of influence in a horizontally anisotropic aquifer was elongated in the direction of higher horizontal hydraulic conductivity and shortened in the direction of lower horizontal hydraulic conductivity compared to area of influence in a homogeneous, isotropic aquifer. Area of influence was larger in an aquifer with ground-water flow in deep, low-permeability fractures than in a homogeneous, isotropic aquifer. Area of influence was larger for a quarry intersected by a hydraulically conductive fault zone and smaller for a quarry intersected by a low-conductivity fault zone. Numerical sensitivity analyses for simulations of quarries in fractured crystalline-rock aquifers indicated simulated head was most sensitive to variations in recharge and horizontal hydraulic conductivity, had little sensitivity to vertical hydraulic conductivity and drain cells used to simulate valleys, and was relatively insensitive to drain cells used to simulate the quarry.

Stability Assessment of the High Safety Pillars in Slovenian Natural Stone Mines / Ocena Stabilności Wysokich Filarów Bezpieczeństwa W Kopalniach Kamieni Naturalnych W Słowenii

NASA Astrophysics Data System (ADS)

Kortnik, Jože

2015-03-01

For the first time in Slovenia, the underground excavation of natural stone blocks was introduced on a trial basis at the Hotavlje I colourful limestone quarry in 1993, in 2002 at the Lipica II limestone quarry, in 2008 at the Lipica I limestone quarry and in 2009 also at the Doline limestone quarry. This was primarily because of the geological structure of the site, the quarry's condition, the potentially large amounts of the overburden in the event of an expansion of the surface part of the quarry, and the increasing needs for this raw material, i.e. natural stone. The underground excavation of natural stone in all locations are done using a modified room-and-pillar excavation method that is adjusted to each site's characteristics, with regularly or irregularly distributed high safety pillars. Since the underground excavation of natural stone blocks is performed at a relatively shallow level under the surface, i.e., at a depth of only 10-40 m, the value of the primary vertical stress state is also relatively low (less than 1.0 MPa). This significantly increases the risk of wedge-shaped pieces or blocks falling out of the ceiling in open underground spaces. In previous years, special attention was paid to the installation of stress-strain systems for controlling the planned dimensions (width and height) of large, open, underground spaces (rooms) and the dimensions of the high safety pillars, along with continual monitoring and identification of the instability phenomena in the ceiling and sides of the large open spaces (rooms). The paper presents the methods and devices used for the optimization and the safety monitoring of high safety pillars for the underground excavation of natural stone blocks in Slovenian natural stone mines. Wydobycie naturalnych bloków skalnych ze złóż podziemnych rozpoczęło się w Słowenii w roku 1993 w kamieniołomach wapieni kolorowych w Hotavlje I (etap próbny). W 2002 uruchomiono kamieniołom Lipica II (wapień), w 2008 kamieniołom Lipica I (wapień), w roku 2009 wapień pozyskiwać także zaczęto z kamieniołomu w Dolinie. Działo się to głównie z uwagi na strukturę geologiczną w tych miejscach, warunki geologiczne kamieniołomów, potencjalnie grube warstwy nadkładu w przypadku rozszerzania działalności w części odkrywkowej kamieniołomu, a także rosnący popyt na te surowce (kamień naturalny). Podziemne wydobycie kamieni naturalnych we wszystkich tych lokalizacjach odbywa się za pomocą zmodyfikowanej metody filarowo- komorowej, dostosowanej do uwarunkowań poszczególnych lokalizacji, z wykorzystaniem układu mniej lub bardziej regularnie rozmieszczonych filarów zabezpieczających. Ponieważ podziemne wydobycie naturalnych bloków skalnych odbywa się stosunkowo płytko pod powierzchnią, (na głębokościach rzędu 10-40 m), to wartości pierwotnego naprężenia pionowego są stosunkowo niewielkie (poniżej 1.0 MPa). Wskutek tego powstaje poważne ryzyko odrywania się od stropu bloków skalnych w kształcie klinów, zwłaszcza w dużych, otwartych komorach podziemnych. W latach ubiegłych instalowano układy monitorujące stan naprężeń i odkształceń, wykorzystywane przy planowaniu wymiarów (szerokości i wysokości) dużych, otwartych, przestrzennych komór podziemnych oraz wymiarów filarów zabezpieczających, a także układy zapewniające stałą kontrolę i wykrywanie niestabilności w obrębie stropu oraz w ścianach bocznych komór. Niniejsza praca zawiera przegląd metod i urządzeń wykorzystywanych do optymalizacji i bezpieczeństwa monitorowania stanu filarów zabezpieczających w podziemnych kopalniach kamieni naturalnych w Słowenii.

Campfire Stories with George Catlin--An Encounter of Two Cultures.

ERIC Educational Resources Information Center

National Museum of American Art, Washington, DC.

This lesson plan collection focuses on attitudes and opinions held by Native Americans and European Americans about the United States. The lesson plans are arranged in four sections: (1) "Ancestral Lands" (Debating for Land; Making Treaties and Weaving Wampum; Pipestone Quarry and Westward Expansion: Whose Rock Is It Anyway); (2)…

Map showing quarries, mines, prospects, and sample data in and near the James River Face Wilderness, Bedford and Rockbridge counties, Virginia

USGS Publications Warehouse

Gazdik, Gertrude C.; Ross, Robert B.

1982-01-01

The area, on the crest of the Blue Ridge Mountains, is drained by small tributaries of the James River.  Altitudes range from 600 ft where U.S. Route 501 crosses the James River to 3,073 ft on Highcock Knob.

Ignoring History: The Flawed Effort to Divorce Reconnaissance From Security in Modern Cavalry Transformation

DTIC Science & Technology

2006-06-16

Weapons of the Waffen -SS: From Small Arms to Tanks (Wellingsborough: Patrick Stephens, Limited, 1988), 106. 47 McCarthy, 29. 48 Schnieder,193-197. 49...book of the German army in the twentieth century). Freiburg, Germany: Podzun- Pallas, 1990. Quarrie, Bruce, Weapons of the Waffen -SS: From Small Arms

AERIAL VIEW, LOOKING EAST TOWARD IRONDALE AND TRUSSVILLE, ALONG THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

AERIAL VIEW, LOOKING EAST TOWARD IRONDALE AND TRUSSVILLE, ALONG THE CREST OF RED (RUFFNER) MOUNTAIN WITH FORMER SLOSS LIMESTONE QUARRY (CENTER). JONES VALLEY AND CITY OF BIRMINGHAM IS TO THE LEFT, SHADES VALLEY TO THE RIGHT. - Ruffner Red Ore Mine, North of I-20 at Madrid Exit, Birmingham, Jefferson County, AL

26 CFR 521.109 - Real property income, natural resource royalties.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 26 Internal Revenue 19 2014-04-01 2010-04-01 true Real property income, natural resource royalties... Are Residents of Denmark and of Danish Corporations § 521.109 Real property income, natural resource... from the operation of mines, quarries, oil wells or other natural resources may, for such taxable year...

26 CFR 521.109 - Real property income, natural resource royalties.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 19 2012-04-01 2010-04-01 true Real property income, natural resource royalties... Are Residents of Denmark and of Danish Corporations § 521.109 Real property income, natural resource... from the operation of mines, quarries, oil wells or other natural resources may, for such taxable year...

26 CFR 521.109 - Real property income, natural resource royalties.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 19 2013-04-01 2010-04-01 true Real property income, natural resource royalties... Are Residents of Denmark and of Danish Corporations § 521.109 Real property income, natural resource... from the operation of mines, quarries, oil wells or other natural resources may, for such taxable year...

7 CFR 330.210a - Administrative instructions listing approved packing materials for plant pests.

Code of Federal Regulations, 2010 CFR

2010-01-01

... materials for plant pests. 330.210a Section 330.210a Agriculture Regulations of the Department of... PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Plant Pests § 330.210a Administrative instructions listing approved packing materials for plant pests. (a) The...

7 CFR 330.206 - Permits for plant pest movement associated with National Defense projects.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Permits for plant pest movement associated with... (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Plant Pests § 330.206...

7 CFR 330.205 - Disposal of plant pests when permits are canceled.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Disposal of plant pests when permits are canceled. 330... PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Plant Pests § 330.205 Disposal of...

7 CFR 330.207 - Permits for movement of organisms issued by other agencies.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Plant Pests § 330.207 Permits... pests, any further conditions of movement to carry out the purposes of the Plant Protection Act which...

Fluorspar

USGS Publications Warehouse

Miller, M.

2012-01-01

World fluorspar demand continued to show signs of recovery from 2008-2009 recession. In 2011, nearly all fluorspar (CaF2) consumed in the United States was imported. Hastie Mining and Trucking Co. produced some fluorspar as a byproduct from its limestone quarry operations in Illinois. In addition, a small amount of usable synthetic fluorspar was produced from industrial waste streams.

27 CFR 555.103 - Transactions among licensees/permittees and transactions among licensees and holders of user...

Code of Federal Regulations, 2010 CFR

2010-04-01

... organization showing the name, address, and date and place of birth of each representative or agent. A licensee... explosive materials, e.g., resale, mining, quarrying, agriculture, construction, sport rocketry, road... certified statement of intended use must specify the name, address, date and place of birth, and social...

STEAM ENHANCED REMEDIATION RESEARCH FOR DNAPL IN FRACTURED ROCK, LORING AIR FORCE BASE, LIMESTONE, MAINE

EPA Science Inventory

This report details a research project on Steam Enhanced Remediation (SER) for the recovery of volatile organic compounds from fractured limestone that was carried out at the Quarry at the former Loring Air Force Base in Limestone, Maine. This project was carried out by USEPA, Ma...

26 CFR 521.109 - Real property income, natural resource royalties.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 19 2011-04-01 2010-04-01 true Real property income, natural resource royalties... Are Residents of Denmark and of Danish Corporations § 521.109 Real property income, natural resource... from the operation of mines, quarries, oil wells or other natural resources may, for such taxable year...

78 FR 49945 - Minerals Management: Adjustment of Cost Recovery Fees

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-16

..., oil and gas extraction, and the mining and quarrying of nonmetallic minerals) as an individual...\\ Increase \\3\\ New value \\4\\ New fee \\5\\ Oil & Gas (parts 3100, 3110, 3120, 3130, 3150) Noncompetitive lease... Solid Minerals Other Than Coal and Oil Shale (parts 3500, 3580) Applications other than those 35 34.99 0...

Prediction of Performance of Diamond Wire Saw with Respect to Texture Characteristics of Rock / Prognozowanie Wydajności Pracy Strunowej Piły Diamentowej W Odniesieniu Do Charakterystyki Tekstury Skał

NASA Astrophysics Data System (ADS)

Ghaysari, N.; Ataei, M.; Sereshki, F.; Mikaiel, R.

2012-12-01

In this study, prediction of production rate in diamond wire saw has been investigated. Performance measurements of diamond wire saw carried out in 7 different quarries of carbonate rocks in Iran. For determination textural properties, rock samples were collected from these quarries. At first, a thin section was prepared for each rock and then 5 digital photographs were taken from each section. After this, all images were digitized using AutoCAD software. Then, area, perimeter, longest diameter and shortest diameter were assigned. According to these parameters, all of the other textural characteristics and texture coefficient were determined too. The correlation between sawing rate and textural characteristics were evaluated using multiple and simple regression analyses. Then developed model was validated by P-value test. It was concluded that area, perimeter, diameter equivalent and index of grain size homogeneity are very effective on production rate. Production rate using diamond wire saw can reliably be predicted using developed model.

Determination of the origin and texture of marble artifacts using stable isotopes

NASA Astrophysics Data System (ADS)

Dotsika, E.; Poutoukis, D.; Zisi, N.; Psomiadis, D.

2009-04-01

For the characterization of marble and the identification of the origin of marble artifacts, samples from several ancient monuments of Greece were analyzed using several techniques: stable isotopes of carbonates (13C, 18O), XRD analysis and optical microscopy, from which information can be obtained on the origin and texture of the marble used for the production of the artifacts. The full range of grain sizes and isotopic signatures that occur in a lot of different quarries has been measured and presented. In a δ13C versus δ18O diagram, the fields corresponding to all known ancient quarries (from Penteli, Cyclades, especially Naxos (Mela, Apol, Apir, Senax), Keros, Paros (Parlak, Parlyc) and Asia Minor (Prokon)) are reported. The plots representing the analyzed samples are also shown on the same diagram. The final results of the study indicate the origin of the carbonate material of the artefacts from each of the ancient monument. In cases that the samples plot on overlapping areas, a further study is proposed, using the maximum grain size of the material.

Anisotropy of Magnetic Susceptibility of Silicic Rocks From Quarries in the Vicinity of São Marcos, Rio Grande Do Sul, South Brazil: Implications for Emplacement Mechanisms.

NASA Astrophysics Data System (ADS)

Canon-Tapia, E.; Raposo, M. I. B.

2017-12-01

The Paraná-Etendeka Large Igneous Province includes felsic volcanic rocks whose mechanism of emplacement and location of their eruptive sources are controversial. Opening of several quarries of dimension stone near the city of Sao Marcos, Rio Grande do Sul, Brazil, offers a unique opportunity to study in detail some of those products. Here, we present the results of a study of the anisotropy of magnetic susceptibility (AMS) completed in some rocks that had been interpreted as the roots of volcanic conduits. Our results, and reexamination of the textural features of the rocks, lead to a reinterpretation that suggests that these rocks were emplaced subaerially, and involved assimilation and remelting of clastic components of previous lavas. The extremely high eruption temperatures of the lavas promoted the development of peperite-like textures and mixing patterns similar to those observed in plutonic environments. Due to the inferred conditions of emplacement, it is unlikely that the eruptive vents are located far from the area of study, therefore ruling out the long-travelled nature of these products.

Anisotropy of magnetic susceptibility of silicic rocks from quarries in the vicinity of São Marcos, Rio Grande do Sul, South Brazil: Implications for emplacement mechanisms

NASA Astrophysics Data System (ADS)

Cañón-Tapia, Edgardo; Raposo, M. Irene B.

2018-04-01

The Paraná-Etendeka Large Igneous Province includes acid volcanic rocks that can be found throughout its extension. Several aspects concerning those rocks remain controversial, including their mechanism of emplacement and location of their eruptive sources. Opening of several quarries of dimension stone near the city of Sao Marcos, Rio Grande do Sul, Brazil, offers a unique opportunity to study in detail the acid products. Here, we present the results of a study of the anisotropy of magnetic susceptibility (AMS) completed in some rocks that had been interpreted as the roots of volcanic conduits. Our results, and reexamination of the textural features of the rocks, lead to a reinterpretation that suggests that these rocks were emplaced subaerially, and involved assimilation and remelting of clastic components of previous products. Due to the inferred conditions of emplacement, it is unlikely that the eruptive vents are located far from the area of study, therefore ruling out the long-travelled nature of these products.

The effect of surface waviness on friction between Neolite and quarry tiles.

PubMed

Chang, Wen-Ruey; Grönqvist, Raoul; Hirvonen, Mikko; Matz, Simon

2004-06-22

Friction is widely used as an indicator of surface slipperiness in preventing accidents in slips and falls. Surface texture affects friction, but it is not clear which surface characteristics are better correlated with friction. Highly correlated surface characteristics could be used as potential interventions to prevent slip and fall accidents. The dynamic friction between quarry tiles and a commonly used sole testing material, Neolite, using three different mixtures of glycerol and water as contaminants at the interface was correlated with the surface parameters of the tile surfaces. The surface texture was quantified with various surface roughness and surface waviness parameters using three different cut-off lengths to filter the measured profiles for obtaining the profiles of either surface roughness or surface waviness. The correlation coefficients between the surface parameters and the measured friction were affected by the glycerol contents and cut-off lengths. Surface waviness parameters could potentially be better indicators of friction than commonly used surface roughness parameters, especially when they were measured with commonly used cut-off lengths or when the viscosity of the liquid contaminant was high.

Analysis of thin fractures with GPR: from theory to practice

NASA Astrophysics Data System (ADS)

Arosio, Diego; Zanzi, Luigi; Longoni, Laura; Papini, Monica

2017-04-01

Whenever we perform a GPR survey to investigate a rocky medium, being the ultimate purpose of the survey either to study the stability of a rock slope or to determine the soundness of a quarried rock block, we would like mainly to detect any fracture within the investigated medium and, possibly, to estimate the parameters of the fractures, namely thickness and filling material. In most of the practical cases, rock fracture thicknesses are very small when compared to the wavelength of the electromagnetic radiation generated by the GPR systems. In such cases, fractures are to be considered as thin beds, i.e. two interfaces whose distance is smaller than GPR resolving capability, and the reflected signal is the sum of the electromagnetic reverberation within the bed. According to this, fracture parameters are encoded in the thin bed complex response and in this work we propose a methodology based on deterministic deconvolution to process amplitude and phase information in the frequency domain to estimate fracture parameters. We first present some theoretical aspects related to thin bed response and a sensitivity analysis concerning fracture thickness and filling. Secondly, we deal with GPR datasets collected both during laboratory experiments and in the facilities of quarrying activities. In the lab tests fractures were simulated by placing materials with known electromagnetic parameters and controlled thickness in between two small marble blocks, whereas field GPR surveys were performed on bigger quarried ornamental stone blocks before they were submitted to the cutting process. We show that, with basic pre-processing and the choice of a proper deconvolving signal, results are encouraging although an ambiguity between thickness and filling estimates exists when no a-priori information is available. Results can be improved by performing CMP radar surveys that are able to provide additional information (i.e., variation of thin bed response versus offset) at the expense of acquisition effort and of more complex and tricky pre-processing sequences.

Ecotoxicological risk assessment linked to infilling quarries with treated dredged seaport sediments.

PubMed

Perrodin, Yves; Donguy, Gilles; Bazin, Christine; Volatier, Laurence; Durrieu, Claude; Bony, Sylvie; Devaux, Alain; Abdelghafour, Mohammed; Moretto, Robert

2012-08-01

The dredged sediments of polluted seaports now raise complex management problems since it is no longer possible to discharge them into the sea. This results in the need to manage them on land, raising other types of technical, economic and environmental problems. Regarding the technical and economic dimensions, traditional waste treatment methods have proved to be poorly adapted, due to very high costs and low absorbable volumes. In this context, filling quarries in coastal areas with treated sediments could represent an interesting alternative for these materials. Nevertheless, for the environmental dimension, it is necessary to demonstrate that this possibility is harmless to inland ecosystems. Consequently, a specific ecotoxicological risk assessment methodology has been formulated and tested on three sediments taken from seaboards of France, in view to providing an operational and usable tool for the prior validation of any operation to fill quarries with treated seaport sediments. This method incorporates the formulation of a global conceptual model of the scenario studied and the definition of protocols for each of its steps: the characterisation of exposures (based on a simulation of sediment deposit), the characterisation of effects (via the study of sediments ecotoxicity), and the final ecotoxicological risk assessment performed as a calculation of a risk quotient. It includes the implementation in parallel of two types of complementary approach: the "substances" approach derived from the European methodology for assessing new substances placed on the market, and the "matrix" approach which is similar to methods developed in France to assess ecological risks in other domains (waste management, polluted site management, …). The application of this dual approach to the three sediments tested led to conclude with reliability that the project to deposit sediments "1" and "2" presented a low risk for the peripheral aquatic ecosystems while sediment "3" presented a high risk. Copyright © 2012 Elsevier B.V. All rights reserved.

The negative effect of environmental geological conditions of some geo-archaeological sites of North Coast and Alexandria

NASA Astrophysics Data System (ADS)

Ibrahim, Hani; Kamh, Gamal

2005-12-01

Three geo-archaeological sites at the North Coast and Alexandria, namely, the Alexandria wall (El Shalalat Park site), Abu Soir temple, and Marina excavations, were investigated to determine the negative impact of a salty environmental condition. The monuments suffer from rock decay of different rates. The geo-archaeological sites were built mainly from oolitic limestone blocks (i.e., the Alexandria wall at the El Shalalat Park site and Abu Soir temple) or excavated on them (i.e., Marina excavations). Field inspection and a lab analysis were carried out to understand the weathering mechanism. Salt weathering criteria such as disintegration, pitting, scaling, exfoliation, and honeycomb are observed on the Alexandria wall and upper parts of the Abu Soir temple, while dangerous cracks are detected on the Marina excavation tombs. The petrographic study of the oolitic limestone samples shows that they consist mainly of oolities and drusy sparite as a cement (oolitic grainstone). Some oolities have quartz grains as nuclei. Hydrochemical analysis shows that the total dissolved salts of extracted solutions of the North Coast quarry samples range from 539 to 686 ppm and dramatically increase (i.e., ten times) for extracted solutions from monument samples, ranging from 5395 to 6880 ppm. The dominant cation is sodium while the dominant anion is chlorine. Acid insoluble residue analysis shows that the carbonate content ranges from 89.2% to 96.4% for fresh samples from quarries and from 9.2% to 94.8% for weathered monument samples. The weight loss of the quarry oolitic limestone samples range from 30.7% to 32.7% and its physical and mechanical properties become worse after being subjected to 15 cycles of a durability simulation soundness test (using a sodium sulphate solution). Our main recommendations are to use suitable grouting for binding the cracks, high durability reconstruction rocks, and suitable cleaning methods to remove salts from the monuments.

Improving ground-penetrating radar data in sedimentary rocks using deterministic deconvolution

USGS Publications Warehouse

Xia, J.; Franseen, E.K.; Miller, R.D.; Weis, T.V.; Byrnes, A.P.

2003-01-01

Resolution is key to confidently identifying unique geologic features using ground-penetrating radar (GPR) data. Source wavelet "ringing" (related to bandwidth) in a GPR section limits resolution because of wavelet interference, and can smear reflections in time and/or space. The resultant potential for misinterpretation limits the usefulness of GPR. Deconvolution offers the ability to compress the source wavelet and improve temporal resolution. Unlike statistical deconvolution, deterministic deconvolution is mathematically simple and stable while providing the highest possible resolution because it uses the source wavelet unique to the specific radar equipment. Source wavelets generated in, transmitted through and acquired from air allow successful application of deterministic approaches to wavelet suppression. We demonstrate the validity of using a source wavelet acquired in air as the operator for deterministic deconvolution in a field application using "400-MHz" antennas at a quarry site characterized by interbedded carbonates with shale partings. We collected GPR data on a bench adjacent to cleanly exposed quarry faces in which we placed conductive rods to provide conclusive groundtruth for this approach to deconvolution. The best deconvolution results, which are confirmed by the conductive rods for the 400-MHz antenna tests, were observed for wavelets acquired when the transmitter and receiver were separated by 0.3 m. Applying deterministic deconvolution to GPR data collected in sedimentary strata at our study site resulted in an improvement in resolution (50%) and improved spatial location (0.10-0.15 m) of geologic features compared to the same data processed without deterministic deconvolution. The effectiveness of deterministic deconvolution for increased resolution and spatial accuracy of specific geologic features is further demonstrated by comparing results of deconvolved data with nondeconvolved data acquired along a 30-m transect immediately adjacent to a fresh quarry face. The results at this site support using deterministic deconvolution, which incorporates the GPR instrument's unique source wavelet, as a standard part of routine GPR data processing. ?? 2003 Elsevier B.V. All rights reserved.

San Pedro leucogranite from A Coruña, Northwest of Spain: Uses of a heritage stone.

NASA Astrophysics Data System (ADS)

Freire Lista, David Martin; Fort, Rafael

2016-04-01

Place names often provide examples of the importance that a heritage stone has had with the foundation of cities and throughout its subsequent history. The heritage of a town is related to its geological environment, which provides its construction materials. The historic quarry of San Pedro leucogranite in northwest Spain is considered here and its petrological characteristics, utilization throughout history and its heritage value are evaluated. The Romans used this stone, however there was an initial boom in the use of San Pedro leucogranite for Galician Romanesque sculptures during the Middle Ages. Notable among other monuments such as the twelfth century Romanesque churches of Santa María del Campo and Santiago and it has also been used to build the pedestal of Herculeś Tower, this is a majestic lighthouse in A Coruña city, it was declared World Heritage by UNESCO in 2 009. San Pedro leucogranite is part of the pavement of the main tourist streets of A Coruña city (Calle Real and Cantones, to name some of the most popular). Betanzos is a historical village about 25 km from A Coruña, its historical center was declared historic-artistic site in 1970. The Betanzos historical center also provides major utilization of this stone in sculptures and ashlars of San Francisco and Santa María de Azogue churches, among others. Color, rarity, appearance, quality and durability are the primary characteristics that have led to San Pedro leucogranite being used for sculpting and building. These characteristics and historical quarrying should be assessed with respect to its heritage significance and strategic location near the city of A Coruña. The preservation and enhancement of its historic quarries that are essential for conservation work and restoration of heritage assets built with the San Pedro leucogranite in this region.

Combination of photogrammetric and geoelectric methods to assess 3d structures associated to natural hazards

NASA Astrophysics Data System (ADS)

Fargier, Yannick; Dore, Ludovic; Antoine, Raphael; Palma Lopes, Sérgio; Fauchard, Cyrille

2016-04-01

The extraction of subsurface materials is a key element for the economy of a nation. However, natural degradation of underground quarries is a major issue from an economic and public safety point of view. Consequently, the quarries stakeholders require relevant tools to define hazards associated to these structures. Safety assessment methods of underground quarries are recent and mainly based on rock physical properties. This kind of method leads to a certain homogeneity assumption of pillar internal properties that can cause an underestimation of the risk. Electrical Resistivity Imaging (ERI) is a widely used method that possesses two advantages to overcome this limitation. The first is to provide a qualitative understanding for the detection and monitoring of anomalies in the pillar body (e.g. faults). The second is to provide a quantitative description of the electrical resistivity distribution inside the pillar. This quantitative description can be interpreted with constitutive laws to help decision support (water content decreases the mechanical resistance of a chalk). However, conventional 2D and 3D Imaging techniques are usually applied to flat surface surveys or to surfaces with moderate topography. A 3D inversion of more complex media (case of the pillar) requires a full consideration of the geometry that was never taken into account before. The Photogrammetric technique presents a cost effective solution to obtain an accurate description of the external geometry of a complex media. However, this method has never been fully coupled with a geophysical method to enhance/improve the inversion process. Consequently we developed a complete procedure showing that photogrammetric and ERI tools can be efficiently combined to assess a complex 3D structure. This procedure includes in a first part a photogrammetric survey, a processing stage with an open source software and a post-processing stage finalizing a 3D surface model. The second part necessitates the production of a complete 3D mesh of the previous surface model to operate some forward modelization of the geo-electrical problem. To solve the inverse problem and obtain a 3D resistivity distribution we use a double grid method associated with a regularized Gauss-Newton inversion scheme. We applied this procedure to a synthetic case to demonstrate the impact of the geometry on the inversion result. This study shows that geometrical information in between electrodes are necessary to reconstruct finely the "true model". Finally, we apply the methodology to a real underground quarry pillar, implying one photogrammetric survey and three ERI surveys. The results show that the procedure can greatly improve the reconstruction and avoid some artifacts due to strong geometry variations.

Relation of historical quarrying, material utilization and performance on buildings in Eastern Finland

NASA Astrophysics Data System (ADS)

Luodes, Nike M.; Pirinen, Heikki

2016-04-01

Finland might seem to have lower stone heritage compared to other southern European countries, but it has been the main exporter of dimension stone to the majestic buildings that made St.Petersburg a recognized cultural heritage. In Finland, though, the stone seems undervalued. The only dramatic and predominant stone buildings are those of agencies and administrations located in the towns, where the stone has been used to impress and symbolize value. Romantic style used massive bossy stone in building's full height and created fine traditional carvings. Otherwise the communities have mainly built settlements in contact with the nature, with materials easily available and of low cost, following architectonical trends of the periods and producing interesting stone details. During the past years, research has been conducted on historical buildings interconnecting scientific and artistic approach to evaluate material durability and cultural relevance of the artifacts. Generally until mid 20th century the stone has been traditionally used massive for basements and walls. The materials still present good mechanical characteristics and most often the weathering level after hundreds of years of exposure had reached only the first millimeters from the curst. Instead the old methodology for deposit exploitation has left visible signs on the buildings. Some examples are visible from Kuopio. The exploitation of small, easy-to-reach surface deposits, even if planned by local experts, has affected quality and appearance of historical buildings. As an example the excavation of shallow quarries where also weathered crop was kept as a product has characterized the basement of the Niirala school that presents change in colors due to original material more than to weathering on site. Fissuring is also visible on a couple of blocks while marks on the rocks depict the old excavation method. Most often the deposits had been in the vicinities, frequently hidden by further construction activities under urban development. In cases where extension of relevant buildings, as for example Kuopio Lyceum, required new material, the original quarry might have not been any more available. Alternative material had to be found and changes in appearance between the construction ages might still be readable from the heterogeneity of the material. In few cases the material had been extracted from remote areas, for buildings symbolizing the town and when the appearance had been a predominant choice. In these cases the quarries are still visible and have been exploited also in more recent years. It might happen that their economical value is not anymore competitive with modern requirements, but still they represent an important material source to avoid restructuration with similar but unsuitable materials.

7 CFR 330.210 - Packing materials and containers for plant pest movement; host materials.

Code of Federal Regulations, 2011 CFR

2011-01-01

... REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Plant Pests § 330.210... through the United States, or interstate, must be free of soil, except when the Deputy Administrator approves in the permit the movement of soil with the plant pest. Subject to this exception, only approved...

7 CFR 330.210 - Packing materials and containers for plant pest movement; host materials.

Code of Federal Regulations, 2010 CFR

2010-01-01

... REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Plant Pests § 330.210... through the United States, or interstate, must be free of soil, except when the Deputy Administrator approves in the permit the movement of soil with the plant pest. Subject to this exception, only approved...

7 CFR 330.210 - Packing materials and containers for plant pest movement; host materials.

Code of Federal Regulations, 2014 CFR

2014-01-01

... REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Plant Pests § 330.210... through the United States, or interstate, must be free of soil, except when the Deputy Administrator approves in the permit the movement of soil with the plant pest. Subject to this exception, only approved...

7 CFR 330.210 - Packing materials and containers for plant pest movement; host materials.

Code of Federal Regulations, 2012 CFR

2012-01-01

... REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Plant Pests § 330.210... through the United States, or interstate, must be free of soil, except when the Deputy Administrator approves in the permit the movement of soil with the plant pest. Subject to this exception, only approved...

7 CFR 330.210 - Packing materials and containers for plant pest movement; host materials.

Code of Federal Regulations, 2013 CFR

2013-01-01

... REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Plant Pests § 330.210... through the United States, or interstate, must be free of soil, except when the Deputy Administrator approves in the permit the movement of soil with the plant pest. Subject to this exception, only approved...

JPRS Report, East Europe

DTIC Science & Technology

1987-10-29

nonferrous ores in quarries and underground; Installations for desulfurization , cleaning, and dry- ing of gas , turbocompressors for methane gas ; Mining...Products Exportation Bucharest Minis- "Indus- try of trial- Foreign Drilling installations and equipment for oil and gas ; export- Trade...equipment; try of Refineries, complex installations, parts, and equip- the ment for the oil- and gas -refining industry; Heavy Factories, complex

WOOD WALKWAY EXTENDING BETWEEN THE GARDEN AND THE RIVERFRONT, LOOKING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

WOOD WALKWAY EXTENDING BETWEEN THE GARDEN AND THE RIVERFRONT, LOOKING SOUTH. PORTION VISIBLE HERE RUNS PAST A ROCK OUTCROPPING THAT IS LIKELY ONE OF A NUMBER OF QUARRY SITES USED BY JOHN BARTRAM DURING THE CONSTRUCTION OF THE HOUSE AND OUTBUILDINGS - John Bartram House & Garden, 54th Street & Lindbergh Boulevard, Philadelphia, Philadelphia County, PA

The Fossil Fauna of the Islands Region of Western Lake Erie.

ERIC Educational Resources Information Center

Bowe, Lulu M., Comp.

The islands of western Lake Erie are rock-bound isles that abound in rocky outcrops and quarries. The rocks of these islands are of two distinct types, Silurian dolomites and Devonian limestones. The dolomites, exposed in the Bass Islands and Sister Islands are virtually devoid of fossils. Conversely, the limestones of Johnson Island, Marblehead,…

Evaluation of Cross-Correlation Methods on a Massive Scale for Accurate Relocation of Seismic Events in East Asia

DTIC Science & Technology

2006-04-21

purposes, such as scientific study of earthquake interactions in a fault zone or seismic sources associated with magma conduits in a volcano , relative... Kilauea , J. Geophys. Res., 99, 375-393. HARRIS, D.B. (1991), A waveform correlation method for identifying quarry explosions, Bull. Seismol. Soc. Am

Vegetation dynamics at a Mojave Desert restoration site, 1992 to 2007

Treesearch

Jeffrey E. Ott; E. Durant McArthur; Stewart C. Sanderson

2011-01-01

The Twist Hollow restoration site on BLM land near St. George, Utah, had been badly disturbed by sand mining, rock quarrying, dumping, off-road vehicles and target shooting prior to its closure and treatment. In December 1992 the site was sculpted and drill seeded with Indian ricegrass (Stipa hymenoides), sand dropseed (Sporobolus cryptandrus), galleta (Hilaria jamesii...

76 FR 59058 - Minerals Management: Adjustment of Cost Recovery Fees

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-23

... mining, oil and gas extraction, and the mining and quarrying of nonmetallic minerals) as an individual... increase New value New fee \\5\\ fee \\1\\ value \\2\\ \\3\\ \\4\\ Oil & Gas (parts 3100, 3110, 3120, 3130, 3150... interest transfer 60 61.94 0.84 62.78 65 Leasing of Solid Minerals Other Than Coal and Oil Shale (parts...

76 FR 76179 - Public Land Order No. 7785; Extension of Public Land Order No. 6912; Montana

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-06

... protection of the Mount Haggin Prehistoric Quarry Site in Deer Lodge County, Montana, which would otherwise...) may call the Federal Information Relay Service (FIRS) at 1-(800) 877-8339 to reach the Bureau of Land... extension in order to continue the protection of the archaeological, historical, educational, interpretive...

Phytophthora species from oak and tanoak forests in California and Oregon

Treesearch

Everett Hansen; David Rizzo; Matteo Garbelotto

2006-01-01

The current sudden oak death (SOD) epidemics in Europe and western North America triggered a search of North American oak forests for other Phytophthora species, and the results from the western United States have been surprising. Phytophthora ramorum has been the main quarry, and as an aerial pathogen, it is a surprise in itself....

Streambank Protection Guidelines,

DTIC Science & Technology

1983-10-01

the types of rubble suitable for dumping on an eroding bank include broken pavement, bricks, building blocks , slag , and quarry waste. Large flat slabs...not provide any long-termn protection. blocks , and house brick. I rfbiae omrilgbo akt Completed gabion revetment made from prefabricated baskets...prevent pressure buildup that could cause revetment failure. BLOCKS . Precast cellular blocks can be ypi i .,, p no- , ,,, ,hag ,.,.,,,,t

The Antiaircraft Journal. Volume 92, Number 3, May-June 1949

DTIC Science & Technology

1949-06-01

Ft. Sill, Okla. Daley, Edward J., to 4051st STU Det Arty Sch, Ft. Sill, Okla. Dalton, Joseph R., to Marianas- Bonins Comd, Guam. Darden, Harry 1., to...AAA and GM Br, Ft. Bliss, Tex. Edwards, Dave W., to 4052d ASU AAA and GM Cen, Ft. Bliss, Tex. Eiler, Donald 1., to US Army Caribbean, Quarry Heights

Evaluation of afforestation development and natural colonization on a reclaimed mine site

Treesearch

Diana Laarmann; Henn Korjus; Allan Sims; Ahto Kangur; Andres Kiviste; John Stanturf

2015-01-01

Post-mining restoration sites often develop novel ecosystems as soil conditions are completely new and ecosystem assemblage can be spontaneous even on afforested sites. This study presents results from long-term monitoring and evaluation of an afforested oil-shale quarry in Estonia. The study is based on chronosequence data of soil and vegetation and comparisons are...

A Multi-Scale Modeling Framework for Shear Initiated Reactions in Energetic Materials

DTIC Science & Technology

2013-07-01

Laboratory, 2004. 10. Fermen-Coker, M., “Numerical Simulation of Adiabatic Shear Bands in Ti-6Al-4V Alloy Due to Fragment Impact,” ARL-RP-91; U.S...V.G., “Application of the Morse Potential Function to Cubic Metals” Phys. Rev., Vol. 114, pp. 687- 690 , 1959. 15. McQuarrie, D.A., Statistical

AERIAL VIEW, LOOKING NORTHWEST TOWARDS JONES VALLEY FROM THE CREST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

AERIAL VIEW, LOOKING NORTHWEST TOWARDS JONES VALLEY FROM THE CREST OF RED (CALLED RUFFNER) MOUNTAIN AND THE CITY OF BIRMINGHAM (TOP), WITH ABANDONED SLOSS CO. LIMESTONE QUARRIES (CENTER) AND RIGHT-OF-WAY OF THE L. & N. BIRMINGHAM MINERAL RAILROAD (LEFT CENTER TO BOTTOM RIGHT). - Ruffner Red Ore Mine, North of I-20 at Madrid Exit, Birmingham, Jefferson County, AL

7 CFR 330.203 - Action on applications for permits to move plant pests; form of and conditions in permits.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Action on applications for permits to move plant pests... PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Plant Pests § 330.203 Action on applications for permits to move plant pests; form of and conditions in...

Fluorspar

USGS Publications Warehouse

Miller, M.

2013-01-01

World fluorspar demand slowed in 2012 and, according to some sources prices decreased, especially in the latter half of the year. In 2012, nearly all fluorspar (CaF2) consumption in the United States was from imports. Hastie Mining and Trucking Co. produced some fluorspar as a byproduct of its limestone quarry operations in Illinois. In addition, a small amount of usable synthetic fluorspar was produced from industrial waste streams.

Fluorspar

USGS Publications Warehouse

Miller, M.M.

2011-01-01

World fluorspar demand showed some signs of recovery in 2010 but was still depressed compared with 2008. In 2010, nearly all fluorspar (CaF[sub2]) consumption in the United States was from imports. Hastie Mining and Trucking Co. produced some fluorspar as a byproduct from its limestone quarry operations in Illinois. In addition, a small amount of usable synthetic fluorspar was produced from industrial waste streams.

259. View of the stone curbing used at the Hefner ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

259. View of the stone curbing used at the Hefner Overlook. This is a common feature at all overlooks on the parkway. All stone on the parkway, except for the Linn Cove Viaduct was quarried from within fifty miles of where it was used. Looking north. - Blue Ridge Parkway, Between Shenandoah National Park & Great Smoky Mountains, Asheville, Buncombe County, NC

Quarries of Culture: An Ethnohistorical and Environmental Account of Sacred Sites and Rock Formations in Southern California's Mission Indian Country

ERIC Educational Resources Information Center

Karr, Steven M.

2005-01-01

Sacred sites and Rock Formations throughout Southern California's India Country are described by Indians as ancestral markers, origin and place-name locales, areas of deity habitation, and power sources. Early ethnographers were keen to record the traditional stories and meanings related to them by their Native collaborators. Rock formations…

Sedimentology of the Early Jurassic terrestrial Steierdorf Formation in Anina, Colonia Cehă Quarry, South Carpathians, Romania

NASA Astrophysics Data System (ADS)

Kędzior, Artur; Popa, Mihai E.

2013-06-01

Kędzior, A. and Popa, E.M. 2013. Sedimentology of the Early Jurassic terrestrial Steierdorf Formation in Anina, Colonia Cehă Quarry, South Carpathians, Romania. Acta Geologica Polonica, 63 (2), 175-199. Warszawa. The continental, coal bearing Steierdorf Formation, Hettangian - Sinemurian in age, is included in the Mesozoic cover of the Reşiţa Basin, Getic Nappe, South Carpathians, Romania. The Steierdorf Formation can be studied in Anina, a coal mining center and an exceptional locality for Early Jurassic flora and fauna, occurring in the middle of the Reşiţa Basin. This paper presents the results of sedimentological, stratigraphical and paleobotanical researches undertaken in Colonia Cehă open cast mine in Anina, where the Steierdorf Formation outcrops widely. Several sedimentary facies associations have been described, these associations permitting the reconstruction of various depositional systems such as alluvial fans, braided and meandering river systems, as well as lacustrine and coal generating marsh systems of the Steierdorf Formation. The sedimentary associations recorded within the Steierdorf Formation show a gradual fining upward trend, pointing to a rising marine water table and a decreasing relief within the source area.

Stress Related Fracturing in Dimension Stone Quarries

NASA Astrophysics Data System (ADS)

Hamdi Deliormanli, Ahmet; Maerz, Norbert H.

2016-10-01

In Missouri, the horizontal stresses (pressures) in the near surface rock are uncommonly high. While the vertical stresses in rock are simply a function of the weight of the overlying rock, near surface stresses can be many times higher. The near surface horizontal stresses can be in excess of 5 times greater than the vertical stresses. In this research, Flatjack method was used to measure horizontal stress in Red Granite Quarry in Missouri. The flat jack method is an approved method of measuring ground stresses. A saw cut is used to “relax” the stress in the ground by allowing the rock to deform inwards the cut. A hydraulic flat jack is used to inflate the slot; to push the rock back to its stressed position, as measured by a strain gauge on either side of the slot. The pressure in the jack, when the rock is exactly back to its original position, is equal to the ground stress before the saw cut was made. According to the results, present production direction for each pit is not good because the maximum stress direction is perpendicular with production direction. This case causes unintentional breakage results in the loss rock. The results show that production direction should be changed.

The Marble Types of Thassos Island through the Ages

NASA Astrophysics Data System (ADS)

Laskaridis, Kostas; Patronis, Michael; Papatrechas, Christos; Schouenborg, Björn

2013-04-01

The first references to the "white whole-grain" marble of Thassos Island, Greece, date back to the 6th century BC when stones were quarried at Alyki peninsula and at Fanari and Vathy capes. Since that time, Thassos marble was exported to Samothraki and other neighbouring islands, Asia Minor coastal cities, Southern Greece and Rome. In ancient times, there were two principal types of marble quarries in Thassos: (a) those producing material for the construction of temples and for the creation of various art pieces, i.e. ornamental stones, and (b) those for extraction of rough blocks for export. This paper aims at describing the Thassos marble, the geological setting in brief, its historic use and future supply possibilities and other reasons why it is a time-enduring ornamental stone. The aesthetical characteristics and the physical mechanical properties of its two main types (i.e. calcitic and dolomitic) are described and evaluated. The relevant results justify the wide application range and the continuous use of Thassos marble from ancient to present times and confirm the ability of this stone to survive over time. Keywords: Thassos, Marble, Ornamental Stones, Physical Mechanical Properties, Historic use

The Postcranial Skeleton of an Exceptionally Complete Individual of the Plated Dinosaur Stegosaurus stenops (Dinosauria: Thyreophora) from the Upper Jurassic Morrison Formation of Wyoming, U.S.A.

PubMed

Maidment, Susannah Catherine Rose; Brassey, Charlotte; Barrett, Paul Michael

2015-01-01

Although Stegosaurus is one of the most iconic dinosaurs, well-preserved fossils are rare and as a consequence there is still much that remains unknown about the taxon. A new, exceptionally complete individual affords the opportunity to describe the anatomy of Stegosaurus in detail for the first time in over a century, and enables additional comparisons with other stegosaurian dinosaurs. The new specimen is from the Red Canyon Ranch Quarry, near Shell Wyoming, and appears to have been so well preserved because it was buried rapidly in a pond or body of standing water immediately after death. The quarry is probably located in the middle part of the Morrison Formation, which is believed to be Tithonian in age in this area. The specimen is referable to Stegosaurus stenops based on the possession of an edentulous anterior portion of the dentary and elevated postzygapophyses on the cervical vertebrae. New information provided by the specimen concerns the morphology of the vertebrae, the iliosacral block and dermal armor. Several aspects of its morphology indicate the individual was not fully skeletally mature at the time of death, corroborating a previous histological study.

The Effects of Fracture Anisotropy on the Damage Pattern and Seismic Radiation from a Chemical Explosion in a Granite Quarry

NASA Astrophysics Data System (ADS)

Rogers-Martinez, M. A.; Sammis, C. G.; Ezzedine, S. M.

2017-12-01

As part of the New England Damage Experiment (NEDE) a 122.7 kg Heavy ANFO charge was detonated at a depth of 13 m in a granite quarry in Barre Vt. Subsequent drill cores from the source region revealed that most of the resultant fracturing was concentrated in the rift plane of the highly anisotropic Barre granite. We simulated this explosion using a dynamic damage mechanics model embedded in the ABAQUS 3D finite element code. The damage mechanics was made anisotropic by taking the critical stress intensity factor to be a function of azimuth in concert with the physics of interacting parallel fractures and laboratory studies of anisotropic granite. In order to identify the effects of anisotropy, the explosion was also simulated assuming 1) no initial damage (pure elasticity) and 2) isotropic initial damage. For the anisotropic case, the calculated fracture pattern simulated that observed in NEDE. The simulated seismic radiation looked very much like that from a tensile fracture oriented in the rift plane, and similar to the crack-like moment tensor observed in the far field of many nuclear explosions.

Prograding coastal facies associations in the Vryheid formation (Permian) at Effingham quarries near Durban, South Africa

NASA Astrophysics Data System (ADS)

Tavener-Smith, R.

1982-05-01

This paper describes and interprets a flat-lying, sandstone—siltstone sequence 70 m thick in three disused quarries. The beds comprise the lowest part of the Vryheid Formation (middle Ecca) in the Durban vicinity. The sequence is conveniently divisible into two parts: the Lower Division constitutes a prograding beach barrier association, while the upper one represents a back barrier lagoonal complex. Fourteen sedimentary facies are described and interpreted to represent a range of depositional environments including open water shelf silts, sandy shoreface and littoral deposits, organic-rich muds and peats of lagoonal origin, a tidal inlet, washover fans and a fluvial channel sand. Among the conclusions reached are that the local middle Ecca coastline extended in a northwest to southeast direction and that progradation was towards the southwest; that the coastline was microtidal and that stormy conditions were common with prevalent palaeowinds from the northwest. The absence of invertebrate body fossils in these strata is attributed to penecontemporaneous solution of shelly remains. This is the first time that a coastal sequence has been identified on the southeast margin of the Main Karoo Basin of South Africa

ADA Title I allegations and the Mining, Quarrying, and Oil/Gas Extraction industry.

PubMed

Van Wieren, Todd A; Rhoades, Laura; McMahon, Brian T

2017-01-01

The majority of research about employment discrimination in the U.S. Mining, Quarrying, and Oil/Gas (MQOGE) industries has concentrated on gender and race, while little attention has focused on disability. To explore allegations of Americans with Disabilities Act (ADA) Title I discrimination made to the Equal Employment Opportunity Commission (EEOC) by individuals with disabilities against MQOGE employers. Key data available to this study included demographic characteristics of charging parties, size of employers, types of allegations, and case outcomes. Using descriptive analysis, allegation profiles were developed for MQOGE's three main sectors (i.e., Oil/Gas Extraction, Mining except Oil/Gas, and Support Activities). These three profiles where then comparatively analyzed. Lastly, regression analysis explored whether some of the available data could partially predict MQOGE case outcomes. The predominant characteristics of MQOGE allegations were found to be quite similar to the allegation profile of U.S. private-sector industry as a whole, and fairly representative of MQOGE's workforce demographics. Significant differences between MQOGE's three main sector profiles were noted on some important characteristics. Lastly, it was found that MQOGE case outcomes could be partially predicted via some of the available variables. The study's limitations were presented and recommendations were offered for further research.

The benthic macrofauna from the Lower Maastrichtian chalk of Kronsmoor (northern Germany, Saturn quarry): taxonomic outline and palaeoecologic implications

NASA Astrophysics Data System (ADS)

Engelke, Julia; Esser, Klaus J. K.; Linnert, Christian; Mutterlose, Jörg; Wilmsen, Markus

2016-12-01

The benthic macroinvertebrates of the Lower Maastrichtian chalk of Saturn quarry at Kronsmoor (northern Germany) have been studied taxonomically based on more than 1,000 specimens. Two successive benthic macrofossil assemblages were recognised: the lower interval in the upper part of the Kronsmoor Formation (Belemnella obtusa Zone) is characterized by low abundances of macroinvertebrates while the upper interval in the uppermost Kronsmoor and lowermost Hemmoor formations (lower to middle Belemnella sumensis Zone) shows a high macroinvertebrate abundance (eight times more than in the B. obtusa Zone) and a conspicuous dominance of brachiopods. The palaeoecological analysis of these two assemblages indicates the presence of eight different guilds, of which epifaunal suspension feeders (fixo-sessile and libero-sessile guilds), comprising approximately half of the trophic nucleus of the lower interval, increased to a dominant 86% in the upper interval, including a considerable proportion of rhynchonelliform brachiopods. It is tempting to relate this shift from the lower to the upper interval to an increase in nutrient supply and/or a shallowing of the depositional environment but further data including geochemical proxies are needed to fully understand the macrofossil distribution patterns in the Lower Maastrichtian of Kronsmoor.

Replacement of Fine Aggregate by using Recyclable Materials in Paving Blocks

NASA Astrophysics Data System (ADS)

Koganti, Shyam Prakash; Hemanthraja, Kommineni; Sajja, Satish

2017-08-01

Cement concrete paving blocks are precast hard products complete out of cement concrete. The product is made in various sizes and shapes like square, round and rectangular blocks of different dimensions with designs for interlocking of adjacent tiles blocks. Several Research Works have been carried out in the past to study the possibility of utilizing waste materials and industrial byproducts in the manufacturing of paver blocks. Various industrial waste materials like quarry dust, glass powder, ceramic dust and coal dust are used as partial replacement of fine aggregate and assessed the strength parameters and compared the profit percentages after replacement with waste materials. Quarry dust can be replaced by 20% and beyond that the difference in strength is not much higher but considering cost we can replace upto 40% so that we can get a profit of almost 10%. Similarly we can replace glass powder and ceramic dust by 20% only beyond that there is decrement in strength and even with 20% replacement we can get 1.34 % and 2.42% of profit. Coal dust is not suitable for alternative material as fine aggregate as it reduces the strength.

Simulation of ground-water flow in the Vevay Township area, Ingham County, Michigan

USGS Publications Warehouse

Luukkonen, Carol L.; Simard, Andreanne

2004-01-01

Ground water is the primary source of water for domestic, public-supply, and industrial use within the Tri-County region that includes Clinton, Eaton, and Ingham Counties in Michigan. Because of the importance of this ground-water resource, numerous communities, including the city of Mason in Ingham County, have begun local Wellhead Protection Programs. In these programs, communities protect their groundwater resource by identifying the areas that contribute water to production wells and potential sources of contamination, and by developing methods to manage and minimize threats to the water supply. In addition, some communities in Michigan are concerned about water availability, particularly in areas experiencing water-level declines in the vicinity of quarry dewatering operations. In areas where Wellhead Protection Programs are implemented and there are potential threats to the water supply, residents and communities need adequate information to protect the water supply.In 1996, a regional ground-water-flow model was developed by the U.S. Geological Survey to simulate ground-water flow in Clinton, Eaton, and Ingham Counties. This model was developed primarily to simulate the bedrock ground-waterflow system; ground-water flow in the unconsolidated glacial sediments was simulated to support analysis of flow in the underlying bedrock Saginaw aquifer. Since its development in 1996, regional model simulations have been conducted to address protection concerns and water availability questions of local water-resources managers. As a result of these continuing model simulations, additional hydrogeologic data have been acquired in the Tri-County region that has improved the characterization of the simulated ground-water-flow system and improved the model calibration. A major benefit of these updates and refinements is that the regional Tri-County model continues to be a useful tool that improves the understanding of the ground-water-flow system in the Tri-County region, provides local water-resources managers with a means to answer ground-water protection and availability questions, and serves as an example that can be applied in other areas of the state.A refined version of the 1996 Tri-County regional ground-water-flow model, developed in 1997, was modified with local hydrogeologic information in the Vevay Township area in Michigan. This model, updated in 2003 for this study, was used to simulate ground-water flow to address groundwater protection and availability questions in Vevay Township. The 2003 model included refinement of glacial and bedrock hydraulic characteristics, better representation of the degree of connection between the glacial deposits and the underlying Saginaw aquifer, and refinement of the model cell size.The 2003 model was used to simulate regional groundwater flow, to delineate areas contributing recharge and zones of contribution to production wells in the city of Mason, and to simulate the effects of present and possible future withdrawals. The areal extent of the 10- and 40-year areas contributing recharge and the zones of contribution for the city of Mason's production wells encompass about 2.3 and 6.2 square miles, respectively. Simulation results, where withdrawals for quarry operations were represented by one well pumping at 1.6 million gallons per day, indicate that water levels would decline slightly over 1 foot approximately 2 miles from the quarry in the glacial deposits and in the Saginaw aquifer. With a reduction of the local riverbed conductance or removal of local river model cells representing Mud Creek, water-level declines would extend further west of Mud Creek and further to the north, east, and south of the simulated quarry. Simulation results indicate that water withdrawn for quarry dewatering operations would decrease ground-water recharge to nearby Mud Creek, would increase ground-water discharge from Mud Creek, and that local water levels would be lowered as a result.

Evolution in the use of natural building stone in Madrid, Spain

NASA Astrophysics Data System (ADS)

Fort, R.; Alvarez de Buergo, M.; Perez-Monserrat, E. M.; Varas-Muriel, M. J.; Gomez-Heras, M.; Freire, D. M.

2012-04-01

The first natural building stone used in Madrid was the flint, from the 9th to the 12th century. It was first used by the Arabs and there are some nice examples left, such as the Arab Wall in the very centre of Madrid. It was a hard and very resistant material, and the end of its use probably had more to do with the fact that was a really difficult stone to work, cut, shape and carve with due to its hardness and compactness, than with its suitability and availability as a building stone. This was the main reason to start using other type of materials, such as the Cretaceous limestones and dolostones- Redueña stone-; although their quarries were not as close to the city as the flintstones were, a Roman road made possible to bring this material to the city. The Redueña stone then became the most frequent used building stone in the city (used a longer time ago in the quarries areas): nice colour, easy to extract and to work and availability were some of the reasons for it, lasting its predominance until the 17th century. At the same time, more or less, the use of granitic materials started, abundant in the Central System range that limits the North of the Madrid province. This material - traditionally known as Berroqueña stone- never stopped to be used in built heritage since then. Although there are many different quarries, until the 17th century, granites from the Zarzalejo area (Center-West area of the Guadarrama mountain range) were most used, and also those from the Alpedrete area (Center-East area of the mentioned range) during mainly the 18th century It was not until this century when the advances in underground mining extraction and the construction of a bridge crossing the Tajo river, allowed the use of Colmenar stone in the city of Madrid, a limestone located at the Southeast of Madrid. It is a white, little porous and resistant material, which, together with the granite, became the traditional building stones of Madrid. This limestone shows excellent properties and is still used nowadays for construction. It was at the end of the 19th and the beginning of the 20th centuries, when the advanced in transport communications, mainly the railway network, allowed the entrance of new building stones, from Spain and abroad (Novelda stone, Baides stone, etc). The study of some heritage buildings let us know this fact, such as the Cathedral and Crypt of La Almudena, the Pantheon of Illustrious Men and the San Manuel and San Benito church. Illustrating all of this, the group designed Geomonumental routes, in which all these materials are shown either on site, in the quarries, or in the heritage building in where they were placed.

Landslide stability analysis on basis of LIDAR data extraction

NASA Astrophysics Data System (ADS)

Hu, Hui; Fernandez-Steeger, Tomas M.; Dong, Mei; Azzam, Rafig

2010-05-01

Currently, existing contradictory between remediation and acquisition from natural resource induces a series of divergences. With regard to open pit mining, legal regulation requires human to fill back the open pit area with water or recreate new landscape by other materials; on the other hand, human can not help excavating the mining area due to the shortage of power resource. However, to engineering geologists, one coincident problem which takes place not only in filling but also in mining operation should be paid more attention to, i.e. the slope stability analysis within these areas. There are a number of construction activities during remediation or mining process which can directly or indirectly cause slope failure. Lives can be endangered since local failure either while or after remediation; for mining process, slope failure in a bench, which carries a main haul road or is adjacent to human activity area, would be significant catastrophe to the whole mining program. The stability of an individual bench or slope is controlled by several factors, which are geological condition, morphology, climate, excavation techniques and transportation approach. The task which takes the longest time is to collect the morphological data. Consequently, it is one of the most dangerous tasks due to the time consuming in mining field. LIDAR scanning for morphological data collecting can help to skip this obstacle since advantages of LIDAR techniques as follows: • Dynamic range available on the market: from 3 m to beyond 1 km, • Ruggedly designed for demanding field applications, • Compact, easily hand-carried and deployed by a single operator. In 2009, scanning campaigns for 2 open pit quarry have been carried out. The aim for these LIDAR detections is to construct a detailed 3D quarry model and analyze the bench stability to support the filling planning. The 3D quarry surface was built up by using PolyWorks 10.1 on basis of LIDAR data. LIDAR data refining takes an important role during surface construction for further more precise analysis purpose. 3D geological model can be built based on the connection between surface model and geological data like borehole data in GOCAD. Regarding the bench stability analysis, LEM (Limit Equilibrium Method) analysis using Janbu and FEM (Finite Element Method) have been adopted during this analyzing task. A program was developed to convert GOCAD 2D section data directly into the FEM software. The meshed model is then used for stability analysis. In one quarry, 3 cross sections have been extracted on basis of LIDAR original data (original 3 cross sections). To evaluate the advantages of LIDAR data for slope analysis, the results of safety factor (SF) were compared to simplified slope models as they are used normally. The comparison showed that variations of the SF reach up to 9%. Additionally, conservative evaluation demonstrated by SF results based on simplified model is not adaptive for decision making of filling.

Estimated hydrostatic/cryostatic pressures during emplacement of pillow lavas at Undirhlithar quarry, Reykjanes Peninsula, southwest Iceland

NASA Astrophysics Data System (ADS)

Hiatt, A. R.; Pollock, M.; Edwards, B. R.; Hauksdottir, S.; Williams, M.; Reinthal, M.

2013-12-01

Undirhlithar quarry exposes the interior of the northern end of a pillow-dominated tindar on the Reykjanes Peninsula in southwest Iceland. The Reykjanes Peninsula has several tindars and tuyas, which are glaciovolcanic features emplaced within or beneath ice. Such features are rapidly becoming one of the fundamental tools for estimating paleo-ice thickness in order to better constrain models for reconstructing ice sheet extents. In Iceland, most estimates of past ice thickness come from geological evidence, such as the elevation of tuya passage zones (e.g., Pedersen et al., IAVCEI 2013), although various theoretical attempts have been made as well. For example, estimations have been calculated from postglacial isostatic uplift (e.g., Le Breton et al., J Geol Soc Lond 2010). An alternative approach for estimating paleo-ice thickness is to use the volatile contents of glaciovolcanic glasses. The extent of degassing of a volatile-saturated magma is, in part, a function of the pressure at which the magma is quenched to form glass. Therefore, pressures calculated from measured H2O contents in quenched basaltic pillow lava rims should record emplacement conditions. On the Reykjanes Peninsula, two studies have used this method to calculate past ice thickness: Mercurio et al. (AGU 2009) estimated a maximum thickness of 400 m for Sveifuháls, several km south of Undirhlithar. Schopka et al. (JGR 2006) analyzed glasses from the predominantly fragmental Helgafell ridge, ~ 2.5 km to the NE of Undirhlithar, and estimated a quenching pressure equivalent of up to ~ 200 m of ice; however, they noted that this disagrees with their estimate of overall ice thickness of ~ 500 m, based on the elevation of Helgafell. Although a growing number of studies are using volatile contents in a range of glass compositions to reconstruct ice thicknesses, many questions remain about the validity of the approach. This study focuses on the reproducibility of the technique using samples from Undirhlithar. Sixteen glass samples were collected from the quenched rinds of twelve different pillows. Four of these samples were collected from a single pillow rim and the others were collected from pillows very close in elevation around the quarry. Two samples were collected several tens of meters above the rest. Each sample was examined under a stereoscope and the freshest chips were selected for analysis. Major and trace element compositions will be analyzed via DCP-AES and ICP-MS, respectively, and volatile contents will be analyzed by FTIR. A preliminary calculation using the average Undirhlithar pillow lava composition, the H2O content of a sample collected in the quarry by Nichols et al. (Earth Planet Sci Lett 2002; 0.4 wt%), and CO2 concentrations from 0 - 20 ppm yields quench pressures of ~ 42 - 56 bar, equivalent to water depths of ~ 450 - 575 m and consistent with previous estimates for ice thickness on the Reykjanes Peninsula.

Introducing two federally listed carbonate-endemic plants onto a disturbed site in the San Bernardino Mountains, California

Treesearch

Orlando Mistretta; Scott D. White

2001-01-01

Erigeron parishii and Eriogonum ovalifolium var. vineum are federally listed local endemic plants occurring almost exclusively on carbonate soils in the northeastern San Bernardino Mountains. In 1991 and 1992, both species were planted onto a barren cut slope above a limestone quarry haul road. The plants were irrigated through the first summer and fall after planting...

Two new Phlegmariurus species (Lycopodiaceae) and one new combination from Peninsular Malaysia.

PubMed

Kiew, Ruth; Kamin, Imin

2018-01-01

Two new species, Phlegmariurus iminii Kiew (Lycopodiaceae) from limestone karst and P. monticola Kiew from montane habitats, are described from Peninsular Malaysia and a new combination is made for Phlegmariurus pinifolius (Trevis.) Kiew. Phlegmariurus iminii , known from a single hill threatened by quarrying, is Critically Endangered; while P. monticola and P. pinifolius that are relatively widespread are of Least Concern.

A Field-Based Biomimicry Exercise Helps Students Discover Connections among Biodiversity, Form and Function, and Species Conservation during Earth's Sixth Extinction

ERIC Educational Resources Information Center

Soja, Constance M.

2014-01-01

In a first-year seminar on mass extinctions, a field-based, paleontology-focused exercise promotes active learning about Earth's biodiversity, form and function, and the biomimicry potential of ancient and modern life. Students study Devonian fossils at a local quarry and gain foundational experience in describing anatomy and relating form to…

Environmental Impact Analysis Process, Groom Mountain Range, Lincoln County, Nevada

DTIC Science & Technology

1985-10-01

bases clustered around springs, temporary camps, rock shelters , quarries, lithic scatters, rock art, pinyon caches, pot drops, isolates, and historic...include pinyon caches and rock shelters with associated historic artifacts and many of the spring sites. These sites provide an unusual research...Management. (b) Proposed Action: Renewed Withdrawal of Groom Mountain Range Addition to Nellis Air Force Bombing and Gunnery Range, Lincoln County, Nevada. (c

Feel the Force of Cogs, Pulleys and Water Power

ERIC Educational Resources Information Center

Pugh, Julie

2016-01-01

Quarry Bank Mill in Cheshire was built in 1784 and was one of the first water-powered cotton mills of the Industrial Revolution. While the machines are now powered by electricity, the water wheel still turns and the machines run. Linking the two are cogs, shafts and belts, so it is possible to see how the power of the river was captured and then…

The physical basis of explosion and blast injury processes.

PubMed

Proud, W G

2013-03-01

Energetic materials are widely used in civilian and military applications, such as quarrying and mining, flares, and in munitions. Recent conflicts have involved the widespread use of improvised explosive devices to attack military, civilians and infrastructure. This article gives a basic overview of explosive technology and the underlying physical processes that produce the injuries encountered. In particular aspects relevant to primary and secondary injuries are discussed.

Stone Quarries and Sourcing in the Carolina Slate Belt

DTIC Science & Technology

2006-04-01

a hilltop with a localized outcrop of small boulders of andesite porphyry . A revisit revealed that the site had recently been destroyed by...rocks are dacitic and include flows, tuffs, breccias, and porphyries . Metasedimentary rocks are metamudstone and fine metasandstone. The Uwharrie...Rocks of this zone, from Shingle Trap, Hattaway, and Sugarloaf Mountains, are mainly light to dark gray metadacite porphyry or metadacitic

Pluto's Paleoglaciation: Processes and Bounds

NASA Astrophysics Data System (ADS)

Umurhan, Orkan; Howard, Alan D.; White, Oliver L.; Moore, Jeffrey M.; Grundy, William M.; Schenk, Paul M.; Beyer, Ross A.; McKinnon, William B.; Singer, Kelsi N.; Lauer, Tod R.; Cheng, Andrew F.; Stern, S. Alan; Weaver, Harold A.; Young, Leslie; Ennico, Kimberly; Olkin, Catherine; New Horizons Science Team

2017-10-01

New Horizons imaging of Pluto’s surface shows eroded landscapes reminiscent of assorted glaciated terrains found on the Earth such as alpine valleys, dendritic networks and others. For example, LORRI imaging of fluted craters show radially oriented ridging which also resembles Pluto’s washboard terrain. Digital elevation modeling indicates that these down-gradient oriented ridges are about 3-4 km spaced apart with depths ranging from 0.2-0.5 km. Present day glaciation on Pluto is characterized by moving N2 ice blocks presumably riding over a H2O ice bedrock substrate. Assuming Pluto’s ancient surface was sculpted by N2 glaciation, what remains a mystery is the specific nature of the glacial erosion mechanism(s) responsible for the observed features.To better resolve this puzzle, we perform landform evolution modeling of several glacial erosion processes known from terrestrial H2O ice glaciation studies. These terrestrial processes, which depend upon whether or not the glacier’s base is wet or dry, include quarrying/plucking and fluvial erosion. We also consider new erosional processes (to be described in this presentation) which are unique to the highly insulating character of solid N2 including both phase change induced hydrofracture and geothermally driven basal melt. Until improvements in our knowledge of solid N2’s rheology are made available (including its mechanical behavior as a binary/trinary mixture of CH4 and CO), it is difficult to assess with high precision which of the aforementioned erosion mechanisms are responsible for the observed surface etchings.Nevertheless, we consider a model crater surface and examine its erosional development due to flowing N2 glacial ice as built up over time according to N2 deposition rates based on GCM modeling of Pluto’s ancient atmosphere. For given erosional mechanism our aim is to determine the permissible ranges of model input parameters (e.g., ice strength, flow rates, grain sizes, quarrying rates, etc.) that best reproduces the observed length scales found on the observed fluted craters. As of the writing of this abstract, both the processes of quarrying and phase change induced hydrofracture appear to be most promising at explaining the fluted crater ridging.

Pluto's Paleoglaciation: Processes and Bounds.

NASA Astrophysics Data System (ADS)

Umurhan, O. M.; Howard, A. D.; White, O. L.; Moore, J. M.; Grundy, W. M.; Schenk, P.; Beyer, R. A.; McKinnon, W. B.; Singer, K. N.; Lauer, T.; Cheng, A. F.; Stern, A.; Weaver, H. A., Jr.; Young, L. A.; Ennico Smith, K.; Olkin, C.

2017-12-01

New Horizons imaging of Pluto's surface shows eroded landscapes reminiscent of assorted glaciated terrains found on the Earth such as alpine valleys, dendritic networks and others. For example, LORRI imaging of fluted craters show radially oriented ridging which also resembles Pluto's washboard terrain. Digital elevation modeling indicates that these down-gradient oriented ridges are about 3-4 km spaced apart with depths ranging from 0.2-0.5 km. Present day glaciation on Pluto is characterized by moving N2 ice blocks presumably riding over a H2O ice bedrock substrate. Assuming Pluto's ancient surface was sculpted by N2 glaciation, what remains a mystery is the specific nature of the glacial erosion mechanism(s) responsible for the observed features. To better resolve this puzzle, we perform landform evolution modeling of several glacial erosion processes known from terrestrial H2O ice glaciation studies. These terrestrial processes, which depend upon whether or not the glacier's base is wet or dry, include quarrying/plucking and fluvial erosion. We also consider new erosional processes (to be described in this presentation) which are unique to the highly insulating character of solid N2 including both phase change induced hydrofracture and geothermally driven basal melt. Until improvements in our knowledge of solid N2's rheology are made available (including its mechanical behavior as a binary/trinary mixture of CH4 and CO), it is difficult to assess with high precision which of the aforementioned erosion mechanisms are responsible for the observed surface etchings. Nevertheless, we consider a model crater surface and examine its erosional development due to flowing N2 glacial ice as built up over time according to N2 deposition rates based on GCM modeling of Pluto's ancient atmosphere. For given erosional mechanism our aim is to determine the permissible ranges of model input parameters (e.g., ice strength, flow rates, grain sizes, quarrying rates, etc.) that best reproduces the observed length scales found on the observed fluted craters. As of the writing of this abstract, both the processes of quarrying and phase change induced hydrofracture appear to be most promising at explaining the fluted crater ridging.

Purbeck Stone - A possible Global Heritage Stone from England

NASA Astrophysics Data System (ADS)

Marker, Brian

2014-05-01

By definition, a Global Heritage Stone Resource (GHSR) should have international significance. The Purbeck Group of uppermost Jurassic to lowermost Cretaceous age (Tithonian- Berriasian) outcrops mainly in the Purbeck area of Dorset, England. It was deposited in shallow freshwater to brackish lagoons with occasional marine incursions. Limestones, mainly biosparites, occur at 6 main levels. Differences in bed thickness, jointing and hardness make it suitable for a variety of purposes including dimension stone, monumental and ornamental stone, roofing tiles, paving, flooring and rockery stone. Near the top of the sequence is a dark gastropod biosparite, traditionally called Purbeck Marble, easily carved, which has been extensively used for decorative interior work in churches and cathedrals particularly for fonts, tombs, flooring and facings on columns for example in the medieval cathedrals of Salisbury, Exeter, Durham, York and Wells and Worcester and Westminster Abbey. The stone was extracted at least from Roman times (1st century AD) through the medieval period. Quarrying expanded from about 1700 reaching a peak in the late 18th and 19th centuries. Stone was transported first by sea but later by rail for wider use. Used in many local buildings, it gives an important element of local character. Many of the villages are designated conservation areas with a requirement for repair, maintenance and new building using local stone. Initially the stone was taken from quarries but was later mined. The number of operating companies declined from 15 to 5 over the past 40 years, with 10 active small quarries. Outputs are from few hundred tonnes to a few thousand tonnes per annum or about 9 to 12 years of permitted reserves but the Planning Authority intends to make sufficient provision for production at recent levels for their development plan period. The extraction sites are in an Area of Outstanding Natural Beauty and close to Jurassic Coast World Heritage Site. This might be a test case for considering whether a stone with this history is significant enough to be designated as a GHSR or is, rather, of national significance.

Strides in Preservation of Malawi's Natural Stone

NASA Astrophysics Data System (ADS)

Kamanga, Tamara; Chisenga, Chikondi; Katonda, Vincent

2017-04-01

The geology of Malawi is broadly grouped into four main lithological units that is the Basement Complex, the Karoo Super group, Tertiary to Quaternary sedimentary deposits and the Chilwa Alkaline province. The basement complex rocks cover much of the country and range in age from late Precambrian to early Paleozoic. They have been affected by three major phases of deformation and metamorphism that is the Irumide, Ubendian and The Pan-African. These rocks comprise gneisses, granulites and schists with associated mafic, ultramafic, syenites and granite rocks. The Karoo System sedimentary rocks range in age from Permian to lower Jurassic and are mainly restricted to two areas in the extreme North and extreme Alkaline Province - late Jurassic to Cretaceous in age, preceded by upper Karoo Dolerite dyke swarms and basaltic lavas, have been intruded into the Basement Complex gneisses of southern Malawi. Malawi is endowed with different types of natural stone deposits most of which remain unexploited and explored. Over twenty quarry operators supply quarry stone for road and building construction in Malawi. Hundreds of artisanal workers continue to supply aggregate stones within and on the outskirts of urban areas. Ornamental stones and granitic dimension stones are also quarried, but in insignificant volumes. In Northern Malawi, there are several granite deposits including the Nyika, which is the largest single outcrop occupying approximately 260.5 km2 , Mtwalo Amazonite an opaque to translucent bluish -green variety of microcline feldspar that occurs in alkali granites and pegmatite, the Ilomba granite (sodalite) occurring in small areas within biotite; apatite, plagioclase and calcite. In the Center, there are the Dzalanyama granites, and the Sani granites. In the South, there are the Mangochi granites. Dolerite and gabbroic rocks spread across the country, treading as black granites. Malawi is also endowed with many deposits of marble. A variety of other igneous, metamorphic and sedimentary rocks are also used as dimension stones. Discovery and preservation of more natural stone deposits through research is essential in the country .Natural stone preservation has not only the potential to generate significant direct and indirect economic benefits for Malawi but also to preserve its heritage .

Coniacian sandstones from the North Sudetic Synclinorium revisited: palaeoenvironmental and palaeogeographical reconstructions based on trace fossil analysis and associated body fossils

NASA Astrophysics Data System (ADS)

Chrząstek, Alina; Wypych, Monika

2018-03-01

The Coniacian quartz sandstones (Żerkowice Member, Rakowice Wielkie Formation) that crop out at quarries near Czaple-Nowa Wieś Grodziska (North Sudetic Synclinorium) contain a low-diversity assemblage of trace fossils: Gyrochorte isp., Ophiomorpha nodosa (Lundgren, 1891), Ophiomorpha isp., Phycodes cf. curvipalmatum (Pollard, 1981), ?Phycodes isp., Planolites cf. beverleyensis (Billings, 1862), Thalassinoides paradoxicus (Woodward, 1830) and ?Thalassinoides isp. Moreover, interesting compound burrow systems, here referred to as Thalassinoides-Phycodes cf. palmatus and ?Thalassinoides-Phycodes, were recognised at the Czaple Quarry. Additionally, ?Gyrochorte isp., Phycodes cf. flabellum (Miller and Dyer, 1878) and ?Treptichnus isp. were encountered at correlative levels in the Rakowice Małe Quarry. Some of these ichnotaxa have not been recorded previously from Coniacian sandstones of the Żerkowice Member. Additionally, in slabs of these sandstones, the gastropod Nerinea bicincta (Bronn, 1836) and the bivalve Lima haidingeri (Zittel, 1866) were found. These interesting finds, in particular the gastropods, were already noted from the study area in the first half of the twentieth century by (Scupin (1912-1913)). Ethologically, the trace fossil assemblage is represented by domichnia or domichnia/fodinichnia (Ophiomorpha, Thalassinoides), fodinichnia (Phycodes) and pascichnia (Gyrochorte, Planolites). The compound burrow systems (Thalassinoides-Phycodes) are interpreted as dwelling/feeding structures. The possible tracemakers are crustaceans (Ophiomorpha, Thalassinoides) or worm-like animals (annelids and other) (Planolites, ?Phycodes, Gyrochorte and ?Treptichnus). The assemblage of trace fossils is characteristic of the Skolithos ichnofacies and Cruziana ichnofacies, typical of shallow-marine settings. Ichnological studies, as well as the presence of accompanying fossils (bivalves, gastropods), confirm the palaeoenvironmental reconstruction of the Żerkowice Member sandstones by (Leszczyński (2010)). That author interpreted the Coniacian sandstones as bar and storm deposits laid down in a shallow epicontinental sea (mainly the foreshore-upper shoreface; up to the middle shoreface) under normal oxygenation and salinity, in soft substrate, above fair-weather wave base. The deposition of the Żerkowice Member sandstones is linked to a regression that started after uplift of the southeastern part of the North Sudetic Synclinorium.

Developing a Planting Medium from Solid Waste Compost and Construction and Demolition Rubble for Use in Quarry Rehabilitation

NASA Astrophysics Data System (ADS)

Assaf, E. A.

2015-12-01

The combination of construction, demolition and excavation (CDE) waste along with the increase in solid waste generation has put a major stress on Lebanon and on the management of its solid waste. Compounding this problem are the issues of quarries closure and rehabilitation and a decrease in forest and vegetative cover. This research aims to provide an integrated solution to the stated problem by developing a "soil mix" derived from a mélange of the organic matter of the solid waste (compost), the CDE waste, and soil. Excavation and construction debris were ground to several sizes and mixed with compost and soil at different ratios. Replicates of these mixes and a set of control (regular soil) were used. In this mix, native and indicator plants are planted (in pots). The plant species used are Mathiolla crassifolia and Zea mays (Corn). Results have shown successful growth of both corn and Mathiolla seedlings in the mixes with higher amounts of construction rubble and compost i.e. Rubble: Soil: Compost Ratio of 2:1:1 and 1:0:1. However treatments with no compost and with less quantities of rubble demonstrated the inability of the soil used to sustain plant growth alone (1:1:1 and 1:1:0). Last but not least, the control consisting of soil only ended up being the weakest mix with yellow corn leaves and small Mathiolla seedlings fifty days after planting and fertilizing. Additionally, soil analysis, rubble and compost analysis were conducted. The samples were tested for heavy metals, nutrient availability and values of pH and EC. No contamination has been reported and an abundance of macronutrients and micronutrients was documented for the soil and compost. High alkalinity is due to the presence of concrete and the high percentage of Calcium Carbonate in Lebanese soils. Accordingly, the most adequate mixes for planting are treatments A (2:1:1) and B (1:0:1) and they should be pursued for a pilot scale study to test their potential use in quarry rehabilitation and eventually urban agriculture.

The Macael landscape in the context of a possible candidate as Global Heritage Stone Province (Almería, SE of Spain)

NASA Astrophysics Data System (ADS)

Navarro Domínguez, Rafael; Pereira Gómez, Dolores; Carrillo, Gloria; Cruz, Anasol

2017-04-01

The beginning of the marble extraction activity in the Macael Area (Almería, South of Spain) date back 4000 years ago, and since then, it has been used in several and important monuments, principally, in Spain. The quality of the works carried out is more than proven. During this time, the extraction has alternated periods of activity with others of lesser or none-activity, ruling both the lives of the inhabitants of the region, and its landscape. The most well-known material extracted in the region, with international recognition, is marble "Blanco Macael" (White Macael), traditionally compared with "Carrara marble". But there are other marbles such as "Amarillo Macael", "Gris Macael" or "Anasol", as well as serpentinites that are referred as "Verde Macael" or "Verde Almería". All of them have been employed in many recent important buildings, at national and international level. The problem of this intensive activity through the years, from the point of view of the preservation of the old landscapes, is that the modern quarries have replaced the old ones, leaving few remains of the old quarries. In some cases it is possible to see Muslim vestiges (e.g. "Puntilla"), but this is an exception. Notwithstanding, the landscape of the region has a high value due to the combination of high mountains, high faces with a lot of banks, waste dumps and full restored areas. Nowadays, the surface occupied by mining exploitation, only in the closer area to Macael village, is more 8.5 km2, with more than forty active quarries and many abandoned ones. These features have helped to configure a singular and beautiful landscape, possibly unique in Spain, in relation with an historic mining activity. This is an important added value to the possible candidature of the "Blanco Macael" as a "Global Heritage Stone Resource" and the "Macael Region" as a "Global Heritage Stone Province", mostly if we consider that these designations must take into consideration the social importance of the activity in the region.

Colorado Yule Marble; building stone of the Lincoln Memorial

USGS Publications Warehouse

McGee, Elaine S.

1999-01-01

The Colorado Yule marble, quarried in Marble, Colo., is a very pure white marble, and it has been widely acclaimed for its quality and purity. This marble has been used for many prominent buildings; one of the most notable is the Lincoln Memorial in Washington, D.C., built nearly 80 years ago. Although most of the marble in the memorial appears to be in very good condition, some of the stones have developed pronounced surficial roughness and show a significant loss of carved details and rounded edges compared with adjacent stones. Because adjacent blocks of marble receive nearly identical exposure to weathering agents that cause deterioration of the marble, it seems very likely that this pronounced difference in durability of adjacent stones arises from some inherent characteristic of the marble. The Colorado Yule marble is a nearly pure calcite marble with minor inclusions of mica, quartz, and feldspar. Compositions of the calcite and the inclusion phases in the marble are typical for those phases. The calcite grains that compose the marble are irregularly shaped and range from 100 to 600 micrometers in diameter. The texture of the marble is even, with a slight preferred directional elongation that is visible when the marble is cut in certain directions. Physical tests of the marble show that its strength is comparable to that of other marbles typically used in buildings. Variations in the durability of the marble, like those seen at the Lincoln Memorial, are not related to variations in calcite composition or to the presence of inclusions in the marble. Most likely, the variations arise from differences in the calcite grain boundaries and the degree to which the grains interlock with one another. Weak grain boundaries that permit water or solutions to penetrate into the marble and dissolve the calcite grains at their edges cause the marble to disaggregate or ?sugar.? Subtle differences in texture that occur in the marble from various parts of the quarry probably cause some stones to be more susceptible to this form of deterioration. These differences may not be readily visible when the stone is freshly quarried.

Stream Quality Assessment on Military Training Grounds Near Waverly, Tennessee

DTIC Science & Technology

2009-07-01

Trace Creek located within the Tennessee Army National Guard Volunteer Training Site—Gorman Quarry near Waverly, Tennessee. The purpose of the study...Environment and Conservation guidelines. The 155’’’ Engineering Asphalt and Rock Crushing Company of the Tennessee Army National Guard trained with...temporal scales (one to several years). Information describing distribution, habitat associations , and life-history patterns of many taxa is available for

Streambank Protection Guidelines for Landowners and Local Governments,

DTIC Science & Technology

1983-10-01

building blocks , slag , and quarry waste. UNCHE SON / / Large flat slabs should be broken up into /smaller pieces. Garbage, vegetation, scrap lumber...concrete blocks , and house brick. but will not provide any long-term protection. Preabrfirated commercial gabion basket. Completed gabion revetment made...prevent pressure buildup that could cause revetment failure. BLOCKS . Precast cellular blocks can be *,-’e : Typi.tal sa.d- e, .t bag r ’etment

Comparison of the Relationship between Words Retained and Intelligence for Three Instructional Strategies among Students with Below-Average IQ

ERIC Educational Resources Information Center

Burns, Matthew K.; Boice, Christina H.

2009-01-01

The current study replicated MacQuarrie, Tucker, Burns, and Hartman (2002) with a sample of 20 students who had been identified with a disability and had an IQ score that was between 1 and 3 standard deviations below the normative mean. Each student was taught 27 words from the Esperanto International Language with the following conditions: (a)…

Numerical Simulation of Quarry Source and Reflection/Refraction Seismic Experiments

DTIC Science & Technology

1990-08-01

Prof. William Menke MIT-Lincoln Laboratory Lamont-Doherty Geological Observatory M-200B of Columbia University P. 0. Box 73 Palisades, NY 10964...University of Arizona Los Angeles, CA 90089-0741 Tucson, AZ 85721 Prof. Christopher H. Scholz Dr. William Wortman Lamont-Doherty Geological Observatory...Sunrise Valley Drive, Suite 1212 Stanford, CA 94305 Reston, VA 22091 Mr. William J. Best Prof. Robert W. Clayton 907 Westwood Drive Seismological

WILD ROGUE WILDERNESS, OREGON.

USGS Publications Warehouse

Gray, Floyd; Miller, Michael S.

1984-01-01

A geologic, geochemical, and geophysical investigation and a survey of mines, prospects, and quarries were conducted to evaluate the mineral-resource potential of the Wild Rogue Wilderness, Oregon. Approximately 800 mining claims, one-third of which are placer gold locations, exist in or adjacent to the area. The Wild Rogue Wilderness has one area of probable resource for copper, lead, zinc, silver, and gold and two area of probable resource potential for gold.

Numerical Simulation of Quarry Blast Sources

DTIC Science & Technology

1994-01-01

REPORT NUMBER 3701 N. Fairfax Dr. #717 3651 Lowry Avenue, SE Arlington, VA 22203-1714 Kirtland, AFB, NM 87117-5777 11. SUPPLEMENTARY NOTES 12a...Blasts, LLNL Report UCRL -JC- 109245. Wuster, J. (1993). Discrimination of Chemical Explosions and Earthquakes in Central Europe - A Case Study, Bull. Seism...NMRO Building 77 3701 N. Fairfax Drive, Suite 717 University of Arizona Arlington, VA 22203-1714 Tucson, AZ 85721 ARPAIOASB/Librarian Dr. William

Lightweight Exoatmospheric Projectile (LEAP) Test Program. Environment Assessment

DTIC Science & Technology

1991-07-01

and Man-Made Environment Kwajalein Atoll is a coral reef containing approximately 100 islands surrounding the largest lagoon in the Nlorld. The Atoll is...entirely from the remains of marine organisms such as reef corals , coralline algae, foramnifera, and others. Soils are coarse, grain size, alkaline...Kwajalein Atoll include ocean reefs , lagoon reefs , lagoon floor and sand flats, harbors, piers, quarries, and sea grass beds. Several reef species are

Office of Naval Research Aggregate Dynamics in the Sea Workshop Held at Pacific Grove, California on September 22-24, 1986

DTIC Science & Technology

1986-09-01

collision, etc.) originate from largely biogenically derived component particles. Local loss terms include sinking, advection and decomposition which...Some quarry or scrape away the aggregate surface, others consume entire particles. Bacterial decomposition on the particle surfaces may also weaken...major role in the degradation of aggregates. Only limited information is available regarding microbial colonization, hydrolysis , and metabolism of the

Crustal thickness variations across the Blue Ridge mountains, southern Appalachians: an alternative procedure for migrating wide-angle reflection data

Treesearch

Robert B. Hawman

2008-01-01

Migration of wide-angle reflections generated by quarry blasts suggests that crustal thickness increases from 38 km beneath the Carolina Terrane to 47–51 km along the southeastern flank of the Blue Ridge. The migration algorithm, developed for generating single-fold images from explosions and earthquakes recorded with isolated, short-aperture arrays, uses the localized...

Earth Observations taken by the Expedition 13 crew

NASA Image and Video Library

2006-05-06

ISS013-E-14843 (6 May 2006) --- Calcite Quarry, Michigan is featured in this image photographed by an Expedition 13 crewmember on the International Space Station. While the Great Lakes region of North America is well known for its importance to shipping between the United States, Canada, and the Atlantic Ocean, it is also the location of an impressive structure in the continent's bedrock -- the Michigan Basin, NASA scientists point out. The Basin looks much like a large bull's-eye defined by the arrangement of exposed rock layers, which all tilt inwards towards the center forming a huge bowl-shaped structure. While this "bowl" is not readily apparent while on the ground, detailed mapping of the rock units on a regional scale revealed the structure to geologists. The outer layers of the Basin include thick deposits of carbonates (limestone and dolomite). These carbonate rocks are mined throughout the Great Lakes region using large open-pit mines. The largest carbonate mine in the world, Calcite Quarry, is depicted in this image. The mine has been active for over 85 years; the worked area (grey region in image center) measures approximately 7 kilometers long by 4 kilometers wide, and is crossed by several access roads (white) into various areas of the mine.

Plowshare Program - American Atomic Bomb Tests For Industrial Applications

ScienceCinema

None

2018-01-16

The United States Atomic Energy Commission (AEC) established the Plowshare Program as a research and development activity to explore the technical and economic feasibility of using nuclear explosives for industrial applications. The reasoning was that the relatively inexpensive energy available from nuclear explosions could prove useful for a wide variety of peaceful purposes. The Plowshare Program began in 1958 and continued through 1975. Between December 1961 and May 1973, the United States conducted 27 Plowshare nuclear explosive tests comprising 35 individual detonations. Conceptually, industrial applications resulting from the use of nuclear explosives could be divided into two broad categories: 1) large-scale excavation and quarrying, where the energy from the explosion was used to break up and/or move rock; and 2) underground engineering, where the energy released from deeply buried nuclear explosives increased the permeability and porosity of the rock by massive breaking and fracturing. Possible excavation applications included: canals, harbors, highway and railroad cuts through mountains, open pit mining, construction of dams, and other quarry and construction-related projects. Underground nuclear explosion applications included: stimulation of natural gas production, preparation of leachable ore bodies for in situ leaching, creation of underground zones of fractured oil shale for in situ retorting, and formation of underground natural gas and petroleum storage reservoirs.

Bucket wheel rehabilitation of ERC 1400-30/7 high-capacity excavators from lignite quarries

NASA Astrophysics Data System (ADS)

Vîlceanu, Fl; Iancu, C.

2016-11-01

The existence of bucket wheel equipment type ERC 1400-30/7 in lignite quarries with lifetime expired, or in the ultimate life period, together with high cost investments for their replacement, makes rational the efforts made to rehabilitation in order to extend their life. Rehabilitation involves checking operational safety based on relevant expertise of metal structures supporting effective resistance but also the replacement (or modernization) of subassemblies that can increase excavation process productivity, lowering energy consumption, reducing mechanical stresses. This paper proposes an analysis of constructive solution of using a part of the classical bucket wheel, on which are located 9 cutting cups and 9 chargers cups and adding a new part so that the new redesigned bucket-wheel will contain 18 cutting-chargers cups, compared to the classical model. On the CAD model of bucket wheel was performed a static and a dynamic FEA, the results being compared with the yield strength of the material of the entire structure, were checked mechanical stresses in the overall distribution map, and were verified the first 4 vibrating modes the structure compared to real loads. Thus was verified that the redesigned bucket-wheel can accomplish the proposed goals respectively increase excavation process productivity, lowering energy consumption and reducing mechanical stresses.

The UK waste input-output table: Linking waste generation to the UK economy.

PubMed

Salemdeeb, Ramy; Al-Tabbaa, Abir; Reynolds, Christian

2016-10-01

In order to achieve a circular economy, there must be a greater understanding of the links between economic activity and waste generation. This study introduces the first version of the UK waste input-output table that could be used to quantify both direct and indirect waste arisings across the supply chain. The proposed waste input-output table features 21 industrial sectors and 34 waste types and is for the 2010 time-period. Using the waste input-output table, the study results quantitatively confirm that sectors with a long supply chain (i.e. manufacturing and services sectors) have higher indirect waste generation rates compared with industrial primary sectors (e.g. mining and quarrying) and sectors with a shorter supply chain (e.g. construction). Results also reveal that the construction, mining and quarrying sectors have the highest waste generation rates, 742 and 694 tonne per £1m of final demand, respectively. Owing to the aggregated format of the first version of the waste input-output, the model does not address the relationship between waste generation and recycling activities. Therefore, an updated version of the waste input-output table is expected be developed considering this issue. Consequently, the expanded model would lead to a better understanding of waste and resource flows in the supply chain. © The Author(s) 2016.

The Postcranial Skeleton of an Exceptionally Complete Individual of the Plated Dinosaur Stegosaurus stenops (Dinosauria: Thyreophora) from the Upper Jurassic Morrison Formation of Wyoming, U.S.A.

PubMed Central

Maidment, Susannah Catherine Rose; Brassey, Charlotte; Barrett, Paul Michael

2015-01-01

Although Stegosaurus is one of the most iconic dinosaurs, well-preserved fossils are rare and as a consequence there is still much that remains unknown about the taxon. A new, exceptionally complete individual affords the opportunity to describe the anatomy of Stegosaurus in detail for the first time in over a century, and enables additional comparisons with other stegosaurian dinosaurs. The new specimen is from the Red Canyon Ranch Quarry, near Shell Wyoming, and appears to have been so well preserved because it was buried rapidly in a pond or body of standing water immediately after death. The quarry is probably located in the middle part of the Morrison Formation, which is believed to be Tithonian in age in this area. The specimen is referable to Stegosaurus stenops based on the possession of an edentulous anterior portion of the dentary and elevated postzygapophyses on the cervical vertebrae. New information provided by the specimen concerns the morphology of the vertebrae, the iliosacral block and dermal armor. Several aspects of its morphology indicate the individual was not fully skeletally mature at the time of death, corroborating a previous histological study. PMID:26466098

Pleistocene Hominins as a Resource for Carnivores: A c. 500,000-Year-Old Human Femur Bearing Tooth-Marks in North Africa (Thomas Quarry I, Morocco)

PubMed Central

Daujeard, Camille; Geraads, Denis; Gallotti, Rosalia; Lefèvre, David; Mohib, Abderrahim; Raynal, Jean-Paul; Hublin, Jean-Jacques

2016-01-01

In many Middle Pleistocene sites, the co-occurrence of hominins with carnivores, who both contributed to faunal accumulations, suggests competition for resources as well as for living spaces. Despite this, there is very little evidence of direct interaction between them to-date. Recently, a human femoral diaphysis has been recognized in South-West of Casablanca (Morocco), in the locality called Thomas Quarry I. This site is famous for its Middle Pleistocene fossil hominins considered representatives of Homo rhodesiensis. The bone was discovered in Unit 4 of the Grotte à Hominidés (GH), dated to c. 500 ky and was associated with Acheulean artefacts and a rich mammalian fauna. Anatomically, it fits well within the group of known early Middle Pleistocene Homo, but its chief point of interest is that the diaphyseal ends display numerous tooth marks showing that it had been consumed shortly after death by a large carnivore, probably a hyena. This bone represents the first evidence of consumption of human remains by carnivores in the cave. Whether predated or scavenged, this chewed femur indicates that humans were a resource for carnivores, underlining their close relationships during the Middle Pleistocene in Atlantic Morocco. PMID:27120202

Application of inert wastes in the construction, operation and closure of landfills: Calculation tool.

PubMed

Colomer Mendoza, Francisco J; Esteban Altabella, Joan; Gallardo Izquierdo, Antonio

2017-01-01

Waste from construction and demolition activities represents one of the highest volumes of waste in Europe. 500 million tonnes are produced throughout the whole EU every year. In some EU members like Spain, approximately 83 per cent of such waste is disposed in landfills. The remaining part is classified and processed in treatment facilities so that it can later be used as recycled aggregates in the construction sector (sand, gravel, aggregates, etc.) but without much commercial success. The aim of this study is to use recycled aggregates from inert wastes (IW) in the different phases of a landfill (construction, operation and closure) with the aid of a new computer tool called LABWASTE.14. This tool incorporates the mathematical relationship among the activities of the landfill and provides as a result the economic viability of using recycled aggregates compared to aggregates from quarries. Therefore, knowing the needs of aggregates in landfills (dams, drainage layers, covering layers, collection wells, etc.) may determine the amount of IW that could be recovered. These calculations can be obtained from some of the data that is introduced (population, land physiography, etc.). Furthermore, the use of LABWASTE.14 makes it possible to reduce the demand for aggregates from quarries. Copyright © 2016 Elsevier Ltd. All rights reserved.

Dispersal of arbuscular mycorrhizal fungi and plants during succession

NASA Astrophysics Data System (ADS)

García de León, David; Moora, Mari; Öpik, Maarja; Jairus, Teele; Neuenkamp, Lena; Vasar, Martti; Bueno, C. Guillermo; Gerz, Maret; Davison, John; Zobel, Martin

2016-11-01

Arbuscular mycorrhizal (AM) fungi are important root symbionts that enhance plant nutrient uptake and tolerance to pathogens and drought. While the role of plant dispersal in shaping successional vegetation is well studied, there is very little information about the dispersal abilities of AM fungi. We conducted a trap-box experiment in a recently abandoned quarry at 10 different distances from the quarry edge (i.e. the potential propagule source) over eleven months to assess the short term, within-year, arrival of plant and AM fungal assemblages and hence their dispersal abilities. Using DNA based techniques we identified AM fungal taxa and analyzed their phylogenetic diversity. Plant diversity was determined by transporting trap soil to a greenhouse and identifying emerging seedlings. We recorded 30 AM fungal taxa. These contained a high proportion of ruderal AM fungi (30% of taxa, 79% of sequences) but the richness and abundance of AM fungi were not related to the distance from the presumed propagule source. The number of sequences of AM fungi decreased over time. Twenty seven plant species (30% of them ruderal) were recorded from the soil seed traps. Plant diversity decreased with distance from the propagule source and increased over time. Our data show that AM fungi with ruderal traits can be fast colonizers of early successional habitats.

Plowshare Program - American Atomic Bomb Tests For Industrial Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2012-04-22

The United States Atomic Energy Commission (AEC) established the Plowshare Program as a research and development activity to explore the technical and economic feasibility of using nuclear explosives for industrial applications. The reasoning was that the relatively inexpensive energy available from nuclear explosions could prove useful for a wide variety of peaceful purposes. The Plowshare Program began in 1958 and continued through 1975. Between December 1961 and May 1973, the United States conducted 27 Plowshare nuclear explosive tests comprising 35 individual detonations. Conceptually, industrial applications resulting from the use of nuclear explosives could be divided into two broad categories: 1)more » large-scale excavation and quarrying, where the energy from the explosion was used to break up and/or move rock; and 2) underground engineering, where the energy released from deeply buried nuclear explosives increased the permeability and porosity of the rock by massive breaking and fracturing. Possible excavation applications included: canals, harbors, highway and railroad cuts through mountains, open pit mining, construction of dams, and other quarry and construction-related projects. Underground nuclear explosion applications included: stimulation of natural gas production, preparation of leachable ore bodies for in situ leaching, creation of underground zones of fractured oil shale for in situ retorting, and formation of underground natural gas and petroleum storage reservoirs.« less

Ecological effects of contaminants in McCoy Branch, 1989-1990

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryon, M.G.

1992-01-01

The 1984 Hazardous and Solid Waste Amendments to the Resource Conservation and Recovery Act (RCRA) required assessment of all current and former solid waste management units. Such a RCRA Facility Investigation (RFI) was required of the Y-12 Plant for their Filled Coal Ash Pond on McCoy Branch. Because the disposal of coal ash in the ash pond, McCoy Branch, and Rogers Quarry was not consistent with the Tennessee Water Quality Act, several remediation steps were implemented or planned for McCoy Branch to address disposal problems. The McCoy Branch RFI plan included provisions for biological monitoring of the McCoy Branch watershed.more » The objectives of the biological monitoring were to: (1) document changes in biological quality of McCoy Branch after completion of a pipeline and after termination of all discharges to Rogers Quarry, (2) provide guidance on the need for additional remediation, and (3) evaluate the effectiveness of implemented remedial actions. The data from the biological monitoring program will also determine if the classified uses, as identified by the State of Tennessee, of McCoy Branch are being protected and maintained. This report discusses results from toxicity monitoring of snails fish community assessment, and a Benthic macroinvertebrate community assessment.« less

Local earthquake tomography of Scotland

NASA Astrophysics Data System (ADS)

Luckett, Richard; Baptie, Brian

2015-03-01

Scotland is a relatively aseismic region for the use of local earthquake tomography, but 40 yr of earthquakes recorded by a good and growing network make it possible. A careful selection is made from the earthquakes located by the British Geological Survey (BGS) over the last four decades to provide a data set maximising arrival time accuracy and ray path coverage of Scotland. A large number of 1-D velocity models with different layer geometries are considered and differentiated by employing quarry blasts as ground-truth events. Then, SIMULPS14 is used to produce a robust 3-D tomographic P-wave velocity model for Scotland. In areas of high resolution the model shows good agreement with previously published interpretations of seismic refraction and reflection experiments. However, the model shows relatively little lateral variation in seismic velocity except at shallow depths, where sedimentary basins such as the Midland Valley are apparent. At greater depths, higher velocities in the northwest parts of the model suggest that the thickness of crust increases towards the south and east. This observation is also in agreement with previous studies. Quarry blasts used as ground truth events and relocated with the preferred 3-D model are shown to be markedly more accurate than when located with the existing BGS 1-D velocity model.

Computer-aided video exposure monitoring.

PubMed

Walsh, P T; Clark, R D; Flaherty, S; Gentry, S J

2000-01-01

A computer-aided video exposure monitoring system was used to record exposure information. The system comprised a handheld camcorder, portable video cassette recorder, radio-telemetry transmitter/receiver, and handheld or notebook computers for remote data logging, photoionization gas/vapor detectors (PIDs), and a personal aerosol monitor. The following workplaces were surveyed using the system: dry cleaning establishments--monitoring tetrachoroethylene in the air and in breath; printing works--monitoring white spirit type solvent; tire manufacturing factory--monitoring rubber fume; and a slate quarry--monitoring respirable dust and quartz. The system based on the handheld computer, in particular, simplified the data acquisition process compared with earlier systems in use by our laboratory. The equipment is more compact and easier to operate, and allows more accurate calibration of the instrument reading on the video image. Although a variety of data display formats are possible, the best format for videos intended for educational and training purposes was the review-preview chart superimposed on the video image of the work process. Recommendations for reducing exposure by engineering or by modifying work practice were possible through use of the video exposure system in the dry cleaning and tire manufacturing applications. The slate quarry work illustrated how the technique can be used to test ventilation configurations quickly to see their effect on the worker's personal exposure.

Comparison of Hydrologic Data from Monroe County, Michigan, 1991-2001

USGS Publications Warehouse

Nicholas, J.R.; Blumer, Stephen P.; McGowan, Rose M.

2001-01-01

In the summer of 2001, there were renewed concerns about the effects of quarry dewatering on nearby domestic ground-water supplies in Monroe County, Michigan. Reports of domestic wells “going dry” are not uncommon historically in Monroe County. Such reports have been linked to droughts, nearby irrigation, quarrying, and other large ground-water uses since as early as 1900 (Sherzer, 1900). Concerns about ground-water availability during the short, but extreme, drought of 1988 prompted the County and the State of Michigan to cooperate with the USGS (U.S. Geological Survey) on a county water resources assessment during the early 1990s (Nicholas and others, 1996). Aquifers in Monroe County generally yield sufficient water for domestic supplies. High transmissivities and low storage in fractured carbonate aquifers and poor water quality at depth (Nicholas and others, 1996), however, make domestic supplies very susceptible to the effects of drought and large withdrawals. Therefore, there are legitimate concerns about sustainable groundwater supplies in the County. Additionally, significant increases in ground-water uses in Monroe County during the past decade coincide with very dry years during the late 1990s. Although ground-water-level data were collected by Monroe County during the last decade, there are not comparable data sets available for many water uses. Therefore, determining whether concerns about domestic wells going dry can be linked to ground-water withdrawals or climate is problematic. In response to recent concerns, the USGS and MDEQ (Michigan Department of Environmental Quality) entered into a cooperative agreement in October 2001 to conduct a study regarding the availability of ground water in Monroe County. The major goal of this study is to determine how widespread are the impacts of quarry dewatering operations. This report summarizes the initial phase of the study which consists of a comparison of hydrologic data from 1991 to 2001. The 1991 data are reported by the USGS in the report by Nicholas and others (1996). Later data come from a variety of sources including USGS, MDEQ, Monroe County, National Oceanic and Atmospheric Administration, U.S. Army Corps of Engineers, and ground-water users. All non-USGS data in this report are given as reported; data verification was not a part of this initial phase. The types of data chosen for comparison in this report include water levels of Lake Erie, precipitation at Monroe, streamflow in the River Raisin at Manchester, ground-water use, ground-water levels, and ground-water quality. The authors acknowledge the cooperation and provision of data and information by several agencies. Ground-water use for irrigation was provided by Ron Van Til of MDEQ. Quarry discharges were provided by Jennifer Rogers of MDEQ. Ground-water-level data for 1993 to 2001 were provided by the Monroe County Health Department. The authors also acknowledge Carlos Hernandez, Chris Hoard, Tom Morgan, Tom Sabin, and Dave Westjohn for collecting streamflow, ground-water, and ground-water-quality data in autumn, 2001. Sharon Baltusis and Jaye Lunsford assisted in the compilation and presentation of hydrologic data in this report.

Gneisses (Serizzi and Beole) of the Verbano-Cusio-Ossola district (Piedmont, Northern Italy): possible candidates for the designation of "Global Heritage Stone province"

NASA Astrophysics Data System (ADS)

Antonella Dino, Giovanna; Borghi, Alessandro; Cavallo, Alessandro; Primavori, Piero

2016-04-01

The Verbano-Cusio-Ossola quarrying district (Piedmont, northern Italy) produces many different ornamental stones (granites, gneisses, marbles): two really important categories are represented by Serizzo and Beola gneisses. Several varieties of Serizzo and Beola crop out in the upper and middle Ossola Valley: Serizzo derives from the Antigorio, Monte Leone and Monte Rosa Penninic Units, whereas Beola from the Monte Leone, Orselina-Moncucco-Isorno and Monte Rosa Penninic Units, as well from the Fobello-Rimella schists (Austroalpine). The Serizzo, represented by a group of foliated granitoid orthogneisses (Serizzo Antigorio, Serizzo Formazza, Serizzo Sempione and Serizzo Monte Rosa varieties), is probably the most important and extensively exploited ornamental stones from the VCO province (about 70% of the VCO stone production). The quarries are mostly concentrated in the Antigorio and Formazza valleys, where the Antigorio nappe has a sub-horizontal attitude and reaches its greatest thickness (up to 1000 m). This stone was largely used to produce columns since the end of XV century (e.g. the old Ospedale Maggiore in Milano, now University of Milano) and later on it was replaced with granites. It was also used in the building structure of the Duomo di Milano, for the plinth and the piers. Nowadays, thanks to its good wear resistance and low cost, it is mainly used in polished slabs for paving: a recent application is the Frankfurt airport floor. Beola is the name of a group of heterogeneous orthogneisses with mylonitic foliation and strong mineralogical lineation (Beola Grigia, Bianca, Ghiandonata, Striata varieties), easy to split into thin slabs with hammer and chisel, occurring in the middle Ossola Valley, between Vogogna and Montecrestese. The quarries of Beola are probably the oldest of the Ossola Valley, although the precise period in which the stone started to be exported is unknown. The Beola trade probably started at the end of the XIII century, with the opening of the Naviglio Grande channel (a Leonardo da Vinci's project) connecting the Ticino river to Milano. However, during the Roman Empire, these stones were already exploited and exported, as testified by the ancient Roman road, visible near the village of Beura. In general, Beola and Serizzo gneisses have also been used for ornamental purposes and for the construction of churches, palaces and monuments, widely documented in many towns and villages of the Ossola Valley (San Gaudenzio church, Montecrestese bell-tower, rural villages, Domodossola city center, etc…) and in the north of Italy (Milano and Torino). The trade of these stones, which characterized (and still characterize) the VCO territory, was affected by the recent economic crisis in the national and international market, so that in the recent years lot of quarries, even if active, are not productive. Due to the global economy situation and the strong competition with other countries (China, India,…), the risk of a collapse in the serizzi and beole production is tangible. The present contribution aim at evidencing the history and peculiarity of these materials, their importance in local culture, and the necessity not to obliterate less famous, but culturally important, stone materials.

Chrysotile asbestos quantification in serpentinite quarries: a case study in Valmalenco, central Alps, northern Italy

NASA Astrophysics Data System (ADS)

Cavallo, Alessandro

2013-04-01

Outcrops of serpentinites are usually strongly fractured and cataclastic, and the rock can only be used as ballast. However, in rare cases, like in Valmalenco (Central Alps, Northern Italy), fractures are regular and well spaced, and the rock mass has good geotechnical quality, ideal conditions for the extraction of dimension stone blocks. The Valmalenco Serpentinite is marketed worldwide as dimension and decorative stone, with remarkable mechanical properties and pleasing colours and textures. However, the same area was once subject to chrysotile asbestos mining, in the form of discrete veins along the main discontinuities of the rock mass. For this reason, airborne asbestos contamination can occur during the extraction and processing cycle of the rocks, therefore it is essential to locate and quantify asbestos in the rock mass, to reduce as much as possible the exposure risk. The first step was a detailed geostructural survey of each quarry, in order to characterize the main discontinuities (orientation, spacing, linear persistence, opening, filling), with special attention to the identification of fibrous minerals. The surveys was followed by extensive sampling of massive rocks, mineralized veins and fillings of fractures, and the cutting sludge derived from diamond wire cutting. Preliminary qualitative XRPD was performed on all samples, while quantitative analysis was carried out on the most representative samples of the main rock mass discontinuities. On the other hand, XRPD is not effective in the identification of asbestos percentages of less than 2% by weight, and the accurate distinction among the various serpentine polymorphs (antigorite, lizardite, chrysotile) is very difficult (if not impossible) when they are simultaneously present, due to their very similar basic structure and the strong structural disorder. The same samples were then analyzed by SEM-EDS (fiber counting after filtration on a polycarbonate filter), for a better distinction between fibrous and lamellar polymorphs. A lot of minerals were identified in the mineralized veins: chrysotile, carbonates, talc, forsterite, brucite, chlorite, garnet (andradite), magnetite and sulphides. The quantitative XRPD and SEM-EDS analyses proved chrysotile percentages comprised between 11 and 100% by weight. On the other hand, chrysotile was never detected in the commercial massive rock. Considering the geostructural properties of the rock mass, the total asbestos content of the quarries is comprised between 0.23% and 0.02% by weight, very low percentages of no mining interest, classifiable as naturally occurring asbestos (NOA) occurrence. The SEM-EDS analyses also showed a slight chrysotile contamination close to the salvages of mineralized veins (in the form of chrysotile filled micro-fractures), for a thickness up to 5-6 cm. This study shows that the airborne asbestos exposure risk can be easily reduced by avoiding diamond wire or explosive cutting along the main mineralized veins, and by squaring off the blocks in the quarry (instead of processing plants). However, this study does not consider the possible asbestos occurrence in the form of micro-veins and micro-fractures, outside of the main discontinuities, and cannot be fully applied to highly fractured rock masses.

Engineering Manual for McMurdo Station. Revision

DTIC Science & Technology

1979-01-01

1-3 Rock Quarry .. ..... ....... ....... ..... 1-4 . Fast Ice .. ..... ....... ....... ........ 1-4 Snow-Drift Ice Slabs. .. ....... ....... ...... 1...Chapter 6. Fast p.- The Fortress Rocks, about 3,000 feet ice was found beneath the sewage outfall north of the central McMurdo Station structure in DF-71...concrete aggregate tion from the land (Figure 1-11). Drilling has and fill material in the McMurdo area. This also shown the presence of fast ice on the

Terrorist Innovations in Weapons of Mass Effect: Preconditions, Causes, and Predictive Indicators

DTIC Science & Technology

2010-10-01

into the Martin Marietta Rock Quarry to steal explosives and blasting caps. This should have triggered an investigation from the FBI counterterrorism...Kifner, “In Long Fight With Israel, Hezbollah Tactics Evolved,” The New York Times, July 19, 2000. 48 Martin Dillon, The Dirty War: Covert...includes scientific discovery. Also see Martin Heidegger for a more obtuse expression of a similar idea, ( Martin Heidegger [William Lovitt, transl

SUGARLOAF ROADLESS AREA, CALIFORNIA.

USGS Publications Warehouse

Powell, Robert E.; Campbell, Harry W.

1984-01-01

On the basis of geologic, geochemical, and geophysical investigations and a survey of mines, quarries, and prospects the Sugarloaf Roadless Area, California, has little promise for the occurrence of metallic mineral or energy resources. Units of carbonate rock and graphitic schist have demonstrated resources of magnesian marble and graphite. Sand, gravel, and construction stone other than carbonate rock are present in the roadless area, but similar or better quality materials are abundant and more accessible outside the area.

Selected Economic Translations on Eastern Europe (184th in the Series)

DTIC Science & Technology

1960-06-22

binding materials industry, we must first of all es - tablish the construction needs in the field of cement in all places wnere its replacement with lime...progressive industry, and despite the very large capital outlays required, the indus- try always showed tendencies toward modernization of techni- ques ...stone quarry. The. plant laboratory staffs were also expanded to exaggerated dimensions«, They some- ti es employ numbers of people corresponding to

The Landforms of Granitic Rocks: An Annotated Bibliography

DTIC Science & Technology

1990-05-01

major sources of copper , tin, silver, gold, and many other valuable commodities. They are naturally highly radioactive, particularly at depth, and are...et al., 1978). Kesel (1977) cited sheeting and spalling as the major process in central Arizona . Crystal growth, usually salt or ice, is a common...quarries; and 4) aplite veins and dikes. Tin is found on Dartmoor, but copper is common only around the edges. Tin and copper lodes run east-west and

Proceedings of the Annual Meeting of the Association for Education in Journalism and Mass Communication (80th, Chicago, Illinois, July 30-August 2, 1997): Magazine.

ERIC Educational Resources Information Center

Association for Education in Journalism and Mass Communication.

The Magazine section of the Proceedings contains the following five papers: "The Role of Barriers to Entry in the Success or Failure of New Magazines: An Exploratory Study" (Kathryn E. Segnar and Fiona A.E. McQuarrie); "An American Title Abroad: A Cross-Cultural Study of One Popular Magazine in the U.S. and the U.K." (Carolyn…

Cascading Effects of Fuel Network Interdiction

DTIC Science & Technology

2015-03-26

Agriculture, hunting, forestry and fishing C10T14 M ning and quarry ng C15T16 Food products, beverages and tobacco C17T19 Textiles, textile products...9369063 C15T16 Food products, beverages and tobacco 33278 70853 222.4224148 112593.0889 4705.413385 49.58915033 491.768614 81.36711771 1554.487224...THESIS Presented to the Faculty Department of Operational Sciences Graduate School of Engineering and Management Air Force Institute of Technology

Water resources of the Iroquois National Wildlife Refuge, Genesee and Orleans counties, New York 2008-2010

USGS Publications Warehouse

Kappel, William M.; Jennings, Matthew B.

2012-01-01

A 2-year study of the water resources of the Iroquois National Wildlife Refuge (Refuge) in western New York was carried out in 2009-2010 in cooperation with the U.S. Fish and Wildlife Service to assist the Refuge in the development of a 15-year Comprehensive Conservtion plan. The study focused on Oak Orchard Creek, which flows through the Refuge, the groundwater resources that underlie the Refuge, and the possible changes to these resources related to the potential development of a bedrock quarry along the northern side of the Refuge. Oak Orchard Creek was monitored seasonally for flow and water quality; four tributary streams, which flowed only during early spring, also were monitored. A continuous streamgage was operated on Oak Orchard Creek, just north of the Refuge at Harrison Road. Four bedrock wells were drilled within the Refuge to determine the type and thickness of unconsolidated glacial sediments and to characterize the thickness and type of bedrock units beneath the Refuge, primarily the Lockport Dolomite. Water levels were monitored in 17 wells within and adjacent to the Refuge and water-quality samples were collected from 11 wells and 6 springs and analyzed for physical properties, nutrients, major ions, and trace metals. Flow in Oak Orchard Creek is from two different sources. During spring runoff, flow from the Onondaga Limestone Escarpment, several miles south of the Refuge, supplements surface-water runoff and groundwater discharge from the Salina Group to the south and east of the Refuge. Flow to Oak Orchard Creek also comes from surface-water runoff from the Lockport Dolomite Escarpment, north of the Refuge, and from groundwater discharging from the Lockport Dolomite and unconsolidated deposits that overlie the Lockport Dolomite. During the summer and fall low-flow period, only small quantities of groundwater flow from the Salina shales and Lockport Dolomite bedrock and the unconsolidated sediments that overlie them; most of this flow is lost to wetland evapotranspiration, and the remainder enters Oak Orchard Creek. Water quality in the Oak Orchard Creek is affected not only by these groundwater sources but also by surface runoff from agricultural areas and the New York State Wildlife Management Area east of the Refuge. Based on the results of the drilling program, the Lockport Dolomite underlies nearly all the Refuge. The Refuge wetlands lie within a bedrock trough between the Lockport Dolomite and Onondaga Limestone Escarpments, to the north and south, respectively. This bedrock trough was filled with mostly fine-grained sediments when Glacial Lake Tonawanda was present following the last period of glaciation. These fine-grained sediments became the substrate on which the wetlands were formed along Oak Orchard Creek and nearby Tonawanda Creek, to the south and west. Water quality in the unconsolidated and bedrock aquifers is variable; poor quality water (sulfide-rich "black water") generally is present south of Oak Orchard Creek and better quality water to the north where the Lockport Dolomite is close to the land surface. A set of springs, the Oak Orchard Acid Springs, is present within the Refuge; the springs are considered unique in New York State because of their naturally low pH (approximately 2.0) and their continual discharge of natural gas. The potential development of a bedrock quarry in the Lockport Dolomite bedrock along the northern border of the Refuge may affect the nearby Refuge wetlands. The extent of drawdown needed to actively quarry the bedrock could change the local hydrology and affect groundwater-flow directions and rates, primarily in the Lockport Dolomite bedrock and possibly the Oak Orchard Acid Springs area, farther to the south. The effect on the volume of flow in Oak Orchard Creek would probably be minimal as a result of the poor interaction between the surface-water and the groundwater systems. Of greater potential effect will be the possible change in the quality of water flowing into the Refuge from the discharge of groundwater during dewatering operations at the quarry; this discharge will flow into the northern part of the Refuge and affect the quantity and quality of wetland areas downstream from the quarry discharge. These changes may affect wetland management activities because of the potential for poorquality water to affect the ecology of the wetlands and the wildlife that use these wetlands.

Assessing Sediment Yield and the Effect of Best Management Practices on Sediment Yield Reduction for Tutuila Island, American Samoa

NASA Astrophysics Data System (ADS)

Leta, O. T.; Dulai, H.; El-Kadi, A. I.

2017-12-01

Upland soil erosion and sedimentation are the main threats for riparian and coastal reef ecosystems in Pacific islands. Here, due to small size of the watersheds and steep slope, the residence time of rainfall runoff and its suspended load is short. Fagaalu bay, located on the island of Tutuila (American Samoa) has been identified as a priority watershed, due to degraded coral reef condition and reduction of stream water quality from heavy anthropogenic activity yielding high nutrients and sediment loads to the receiving water bodies. This study aimed to estimate the sediment yield to the Fagaalu stream and assess the impact of Best Management Practices (BMP) on sediment yield reduction. For this, the Soil and Water Assessment Tool (SWAT) model was applied, calibrated, and validated for both daily streamflow and sediment load simulation. The model also estimated the sediment yield contributions from existing land use types of Fagaalu and identified soil erosion prone areas for introducing BMP scenarios in the watershed. Then, three BMP scenarios, such as stone bund, retention pond, and filter strip were treated on bare (quarry area), agricultural, and shrub land use types. It was found that the bare land with quarry activity yielded the highest annual average sediment yield of 133 ton per hectare (t ha-1) followed by agriculture (26.1 t ha-1) while the lowest sediment yield of 0.2 t ha-1 was estimated for the forested part of the watershed. Additionally, the bare land area (2 ha) contributed approximately 65% (207 ha) of the watershed's sediment yield, which is 4.0 t ha-1. The latter signifies the high impact as well as contribution of anthropogenic activity on sediment yield. The use of different BMP scenarios generally reduced the sediment yield to the coastal reef of Fagaalu watershed. However, treating the quarry activity area with stone bund showed the highest sediment yield reduction as compared to the other two BMP scenarios. This study provides an estimate of the impact that each BMP has on specific land use and Fagaalu's reef. It also offers information that may be useful for the coastal water resource management and mitigation measures to reduce sediment yield of the study site and similar areas.

Oxidatively damaged DNA in the nasal epithelium of workers occupationally exposed to silica dust in Tuscany region, Italy.

PubMed

Peluso, Marco E M; Munnia, Armelle; Giese, Roger W; Chellini, Elisabetta; Ceppi, Marcello; Capacci, Fabio

2015-07-01

Chronic silica exposure has been associated to cancer and silicosis. Furthermore, the induction of oxidative stress and the generation of reactive oxygen species have been indicated to play a main role in the carcinogenicity of respirable silica. Therefore, we conducted a cross-sectional study to evaluate the prevalence of 3-(2-deoxy-β-D-erythro-pentafuranosyl)pyrimido[1,2-α]purin-10(3H)-one deoxyguanosine (M1dG) adducts, a biomarker of oxidative stress and peroxidation of lipids, in the nasal epithelium of 135 silica-exposed workers, employed in pottery, ceramic and marble manufacturing plants as well as in a stone quarry, in respect to 118 controls living in Tuscany region, Italy. The M1dG generation was measured by the (32)P-postlabelling assay. Significant higher levels of M1dG adducts per 10(8) normal nucleotides were observed in the nasal epithelium of smokers, 77.9±9.8 (SE), and in those of former smokers, 80.7±9.7 (SE), as compared to non-smokers, 57.1±6.2 (SE), P = 0.001 and P = 0.004, respectively. Significant increments of M1dG adducts were found in the nasal epithelium of workers that handle artificial marble conglomerates, 184±36.4 (SE), and in those of quarry workers, 120±34.7 (SE), with respect to controls, 50.6±2.7 (SE), P = 0.014 and P < 0.001, respectively. Null increments were observed in association with the pottery and the ceramic factories. After stratification for different exposures, silica-exposed workers that were co-exposed to organic solvents, and welding and exhaust fumes have significantly higher M1dG levels, 90.4±13.4 (SE), P = 0.014 vs. Our data suggested that silica exposure might be associated with genotoxicity in the nasal epithelial cells of silica-exposed workers that handle of artificial marble conglomerates and quarry workers. Importantly, we observed that co-exposures to other respiratory carcinogens may have contributed to enhance the burden of M1dG adducts in the nasal epithelium of silica-exposed workers. © The Author 2015. Published by Oxford University Press on behalf of the UK Environmental Mutagen Society. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Cretaceous planktic foraminiferal biostratigraphy of the Calera Limestone, Northern California, USA

USGS Publications Warehouse

Sliter, W.V.

1999-01-01

The Calera Limestone is the largest, most stratigraphically extensive limestone unit of oceanic character included in the Franciscan Complex of northern California. The aim of this paper is to place the Calera Limestone at its type locality (Rockaway Beach, Pacifica) in a high-resolution biostratigraphy utilizing planktic foraminifers studied in thin section. A section, about 110 m-thick, was measured from the middle thrust slice exposed by quarrying on the southwest side of Calera Hill at Pacifica Quarry. Lithologically, the section is divided in two units; a lower unit with 73 m of black to dark-grey limestone, black chert and tuff, and an upper unit with 36.8 m of light-grey limestone and medium-grey chert. Two prominent black-shale layers rich in organic carbon occur 11 m below the top of the lower black unit and at the boundary with overlying light-grey unit, yielding a total organic content (TOC) of 4.7% and 1.8% t.w., respectively. The fossiliferous Calera Limestone section measured at Pacifica Quarry, from the lower black shale, contains eleven zones and three subzones that span approximately 26 m.y. from the early Aptian to the late Cenomanian. The zones indentified range from the Globigerinelloides blowi Zone to the Dicarinella algeriana Subzone of the Rotalipora cushmani Zone. Within this biostratigraphic interval, the Ticinella bejaouaensis and Hedbergella planispira Zones at the Aptian/Albian boundary are missing as are the Rotalipora subticinensis Subzone of the Biticinella breggiensis Zone and the overlying Rotalipora ticinensis Zone in the late Albian owing both to low-angle thrust faulting and to unconformities. The abundance and preservation of planktic foraminifers are poor in the lower part and improve only within the upper G. algerianus Zone. The faunal relationship indicate that the lower black shale occurs in the upper part of the G. blowi Zone and correlates with the Selli Event recognized at global scale in the early Aptian. The upper black shale occurs at or near the boundary between the G. ferreolensis and G. algerianus Zone in the late Aptian. This black layer, or Thalmann Event as named here, seems to represent the sedimentary expression, at the scale of Permanente Terrane, of a global perturbation of the carbon cycle.

The Swedish Bohus granite - a stone with a fascinating history

NASA Astrophysics Data System (ADS)

Schouenborg, Björn; Eliasson, Thomas

2015-04-01

One of the most well-known and well spread Swedish stone types used as building stones is the Bonus granite. It outcrops in an area north of Gothenburgh (SW Sweden), along the coastline, approximately 35 km wide and 85 km long. The granite continues into Norway as the Iddefjord granite. The Bohus granite is one of Sweden's youngest granites. Isotopic dating shows that the magma cooled at about 920 M years ago and thus marking the end of the Sveconorwegian orogoney. It is a composite granite massif area with several granitic intrusions but with rather homogeneous mineralogy. However, colour and texture varies quite a lot and the colour ranges from red to reddish grey although some pure grey varieties occur sparsely. The grain size ranges from medium grained to coarse grained and even with some porphyric parts. Quarrying in an industrial scale started 1842. The merchant A C Kullgren opened the first quarry and produced stones for the construction of the 86 km long Trollhättan channel connecting lake Vänern and the Atlantic ocean in the SW Sweden The stone was used for constructing harbors and wharves along the channel. Several quarries opened in the late 1800 around 1870 - 1890 and the export increased steadily with deliveries to Germany, Denmark, Holland, England and even to South America. The stone industries in Bohuslän (Bohus county), at its peak in 1929, engaged around 7 000 employees. During the depression in 1930 almost all of them became unemployed. However, as a curiosity, production and export continued to Germany for construction of Germania, the future World capital city ("Welthauptstadt Germania"), planned by Adolf Hitler and Albert Speer. About 500 stone workers were kept employed for this project during the late thirties. Today several varieties are still produced: Evja/Ävja, Tossene, Brastad, Näsinge, Broberg, Nolby, Allemarken and Skarstad. However, the number of stone workers is far from that of the early 1900. The Swedish production is mainly blocks but also paving products like sets, slabs and kerb stones are still manufactured in Sweden. Blocks are generally further processed in other countries like Italy and China to reach the European market as semi-finished products like slabs or finished products for any kind of application. The granite is very durable and suitable for all types of natural stone products.

The Significance of Podpe limestone in the Cultural Heritage of Slovenia

NASA Astrophysics Data System (ADS)

Kramar, Sabina; Bedjanič, Mojca; Mirtič, Breda; Mladenović, Ana; Rožič, Boštjan; Skaberne, Dragomir; Zupančič, Nina

2013-04-01

Podpeč limestone is characterized by its dark grey, or nearly black colour, with white fossil shells of the Lithiotis. These beds, which have been dated as Lower Jurassic, occur in southern and south-western Slovenia, and are particularly common in areas southwest of Ljubljana. The main quarry, which is not active, is located next to the village of Podpeč near Ljubljana, and has been declared as a geological natural value of national importance; as such, it is officially protected as a natural monument. In the close vicinity of the village there are some other smaller quarries, but all of them have been abandoned. With its very low porosity (0.9%) and water absorption (0.13 - 0.30 % by mass), but relatively high compressive strength (185 MPa), this limestone is quite durable, although its colouring becomes somewhat bleached when situated outdoors. The use of Podpeč limestone was first documented in the case of the Roman period in Slovenia, when it was used for funerary stelae, votive altars, boundary stones, and other artefacts. At the end of the 5th Century AD, with the fall of the Roman Empire, stone-cutting ceased at Podpeč for the next few centuries. Before 1850 Podpeč limestone had no special value. Only very few portals or pilasters made of this stone are known, and no evidence has been found in churches. However, towards the end of the 19th Century Podpeč limestone became better-known, although before the first half of the 20th Century there were no significant stonecutting workshops in Podpeč. After this, stone was supplied progressively from the main quarry. Large numbers of buildings in Ljubljana and central Slovenia have sills, lintels and jambs made of Podpeč limestone. Production stopped in 1967. The internationally renowned Slovenian architect Jože Plečnik (1872-1957) used Podpeč limestone in various Slovenian buildings - the central stadium in Ljubljana, the National University Library, many altars and churches (Bogojina, the Ši\\vska and Bežigrad districts of Ljubljana), parts of the Parliament of the Republic of Slovenia (Ljubljana), and Ljubljana's first skyscraper. With the exception of the Antonius Church in Belgrade, which was constructed by Plečnik, where part of the altar was made of Podpeč limestone, the international use of Podpeč limestone is not known.

Remedial Investigation Report on Chestnut Ridge Operable Unit 2 (Filled Coal Ash Pond/Upper McCoy Branch) at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee. Volume 1. Main Text

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-08-01

This document is a report on the remedial investigation (RI) of Chestnut Ridge Operable Unit (OU) 2 at the Oak Ridge Y-12 Plant. Chestnut Ridge OU 2 consists of Upper McCoy Branch (UMB), the Filled Coal Ash Pond (FCAP), and the area surrounding the Sluice Channel formerly associated with coal ash disposal in the FCAP. Chestnut Ridge OU 2 is located within the U.S. Department of Energy`s (DOE`s) Oak Ridge Reservation in Anderson County, Tennessee, approximately 24 miles west of Knoxville. The pond is an 8.5-acre area on the southern slope of Chestnut Ridge, 0.5 mile south of the mainmore » Y-12 Plant and geographically separated from the Y-12 Plant by Chestnut Ridge. The elevation of the FCAP is {approximately} 950 ft above mean sea level (msl), and it is relatively flat and largely vegetated. Two small ponds are usually present at the northeast and northwest comers of the FCAP. The Sluice Channel Area extends {approximately}1000 ft from the northern margin of the FCAP to the crest of Chestnut Ridge, which has an elevation of {approximately}1100 ft above msl. The Sluice Channel Area is largely vegetated also. McCoy Branch runs from the top of Chestnut Ridge across the FCAP into Rogers Quarry and out of the quarry where it runs a short distance into Milton Hill Lake at McCoy Embayment, termed UMB. The portion south of Rogers Quarry, within Chestnut Ridge OU 4, is termed Lower McCoy Branch. The DOE Oak Ridge Y-12 Plant disposed of coal ash from its steam plant operations as a slurry that was discharged into an ash retention impoundment; this impoundment is the FCAP. The FCAP was built in 1955 to serve as a settling basin after coal ash slurried over Chestnut Ridge from the Y-12 Plant. The FCAP was constructed by building an earthen dam across the northern tributary of McCoy Branch. The dam was designed to hold 20 years of Y-12 steam plant ash. By July 1967, ash had filled up the impoundment storage behind the dam to within 4 ft of the top.« less

Tree-ring records of near-Younger Dryas time in central North America : preliminary results from the Lincoln Quarry site, central Illinois, USA

Treesearch

Irina P. Panyushkina; Steven W. Leavitt; Alex Wiedenhoeft; Sarah Noggle; Brandon Curry; Eric Grimm

2004-01-01

The abrupt millennial-scale changes associated with the Younger Dryas (YD) event (“chronozone”) near the dawn of the Holocene are at least hemispheric, if not global, in extent. Evidence for the YD cold excursion is abundant in Europe but fairly meager in central North America. We are engaged in an investigation of high-resolution environmental changes in mid-North...

Statistical Analysis of 3-Point Bending Properties of Polymer Concretes Made From Marble Powder Waste, Sand Grains, and Polyester Resin

NASA Astrophysics Data System (ADS)

Benzannache, N.; Bezazi, A.; Bouchelaghem, H.; Boumaaza, M.; Amziane, S.; Scarpa, F.

2018-01-01

The mechanical performance of concrete polymer beams subjected to 3-point bending was investigated. The polymer concrete incorporates marble powder waste and quarry sand. The results obtained showed that the type of sand, and amount of marble powder and sand aggregate affected the resistance of the polymer concrete beams significantly. The marble waste increased their bending strength by reducing the porosity of polymer concrete.

Common clay and shale

USGS Publications Warehouse

Virta, R.L.

2006-01-01

At present, 150 companies produce common clay and shale in 41 US states. According to the United States Geological Survey (USGS), domestic production in 2005 reached 24.8 Mt valued at $176 million. In decreasing order by tonnage, the leading producer states include North Carolina, Texas, Alabama, Georgia and Ohio. For the whole year, residential and commercial building construction remained the major market for common clay and shale products such as brick, drain tile, lightweight aggregate, quarry tile and structural tile.

Cretaceous Footprints Found on Goddard Campus

NASA Image and Video Library

2017-12-08

Michael Godfrey beginning the process of quarrying down around the footprint bearing layer. Photo taken December 31, 2012. Image courtesy Stephen Godfrey NASA image use policy. NASA Goddard Space Flight Center enables NASA’s mission through four scientific endeavors: Earth Science, Heliophysics, Solar System Exploration, and Astrophysics. Goddard plays a leading role in NASA’s accomplishments by contributing compelling scientific knowledge to advance the Agency’s mission. Follow us on Twitter Like us on Facebook Find us on Instagram

Quarry Creek - Excavation, Analysis and Prospect of a Kansas City Hopewell Site, Fort Leavenworth, Kansas

DTIC Science & Technology

1993-06-01

1941), who lists 53 species of reeds, grasses and sedges; 79 species of trees, shrubs and vines ; and 223 species of herbaceous plants. While some of...limited areas of Minnesota, Michigan, Ohio, and Indiana and in more extensive areas of Iowa, Illinois, eastern Nebraska, eastern Kansas, northern Missouri...possession of prairie areas... During long, dry periods the process has been reversed. Grasses invade wooded areas and kill the shrubs and trees probably

Quantitative models for aggregate: some types and examples from Oklahoma carbonate rocks

USGS Publications Warehouse

Bliss, James D.

1999-01-01

Evaluation of data for three engineering variable--absorption, bulk specific gravity, and freeze-thaw durability (350 cycles)--was made for quarries in carbonate rocks in Oklahoma that supply aggregate. It was found that lower Palrozoic carbonate rocks (Cambrian through Devonian) are likely to make a better quality aggregate than upper Paleozoic (Mississippian to Permian) carbonate rocks. In addition, freeze-thaw durability can be forecast from absorption and is exemplary for lower Paleozoic carbonate rocks.

A study in cost analysis of aggregate production as depending on drilling and blasting design

NASA Astrophysics Data System (ADS)

Bilim, Niyazi; Çelik, Arif; Kekeç, Bilgehan

2017-10-01

Since aggregate production has vital importance for many engineering projects-such as construction, highway and plant-mixed concrete production-this study was undertaken to determine how the costs for such production are affected by the design of drilling and blasting processes used. Aggregates are used in the production of concrete and asphalt, which are critical resources for the construction sector. The ongoing population increase and the growth of living standards around the world drive the increasing demand for these products. As demand grows, competition has naturally arisen among producers in the industry. Competition in the market has directly affected prices, which leads to the need for new measures and cost analysis on production costs. The cost calculation is one of the most important parameters in mining activities. Aggregate production operations include drilling, blasting, secondary crushing (if necessary), loading, hauling and crushing-screening, and each of these factors affects cost. In this study, drilling and blasting design parameters (such as hole diameter, hole depth, hole distance and burden) were investigated and evaluated for their effect on the total cost of quarrying these products, based on a particular quarry selected for this research. As the result of evaluation, the parameters actually driving costs have been identified, and their effects on the cost have been determined. In addition, some suggestions are presented regarding production design which may lead to avoiding increased production costs.

Evaluation of Wheel Loaders in Open Pit Marble Quarrying by Using the AHP and Topsis Approaches / Ocena pracy ładowarki na podwoziu kołowym w odkrywkowej kopalni marmuru w oparciu o metody AHP i topsis

NASA Astrophysics Data System (ADS)

Kun, Mete; Topaloǧlu, Şeyda; Malli, Tahir

2013-03-01

The marble mining in Turkey has been rising since the early 80's. In relation to that, the marble income has become noticeably bigger than those of other mining sectors. In recent years, marble and natural stone export composes half of the total mine export with a value of two billion dollars. This rapid development observed in marble operation has increased the importance of mining economics, income-expenditure balance and cost analysis. The most important cost elements observed in marble quarrying are machinery and equipment, labor costs and geological structures of the field. The aim of this study is to is to propose a multi-criteria decision making (MCDM) approach to evaluate the wheel loader alternatives and select the best loader under multiple criteria. A two-step methodology based on two MCDM methods, which are namely the Analytic Hierarchy Process (AHP) and the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS), are used in the evaluation procedure. More precisely, AHP is applied to determine the relative weights of evaluation criteria and TOPSIS is applied to rank the wheel loader alternatives. The proposed approach also provides a relatively simple and very well suited decision making tool for this type of decision making problems.

Early Cambrian wave-formed shoreline deposits: the Hardeberga Formation, Bornholm, Denmark

NASA Astrophysics Data System (ADS)

Clemmensen, Lars B.; Glad, Aslaug C.; Pedersen, Gunver K.

2017-09-01

During the early Cambrian, the Danish island Bornholm was situated on the northern edge of the continent Baltica with palaeolatitudes of about 35°S. An early Cambrian (Terreneuvian) transgression inundated large areas of Baltica including Bornholm creating shallow marine and coastline environments. During this period, wave-formed shoreline sediments (the Vik Member, Hardeberga Formation) were deposited on Bornholm and are presently exposed at Strøby quarry. The sediments consist of fine- and medium-grained quartz-cemented arenites in association with a few silt-rich mudstones. The presence of well-preserved subaqueous dunes and wave ripples indicates deposition in a wave-dominated upper shoreface (littoral zone) environment, and the presence of interference ripples indicates that the littoral zone environment experienced water level fluctuations due to tides and/or changing meteorological conditions. Discoidal structures (medusoids) are present in the quarry, but due to the relative poor preservation of their fine-scale structures it is difficult to determine if the discoids represent true medusae imprints or inorganic structures. The preservation of the shallow-water bedforms as well as the possible medusae imprints is related to either the formation of thin mud layers, formed during a period of calm water when winds blew offshore for a longer period, or to the growth of bacterial mats. The orientation of the wave-formed bedforms indicates a local palaeoshoreline trending NE-SW and facing a large ocean to the north.

Recent adjustments to the long profile of Cooksville Creek, an urbanized bedrock channel in Mississauga, Ontario

NASA Astrophysics Data System (ADS)

Tinkler, Keith J.; Parish, John

Cooksville Creek (33 km2) is based in weak Georgian Bay Formation shale and thin limestone and has been gradually urbanized by the City of Mississauga within the last thirty years. These conditions, together with a mean thalweg gradient of about 0.77%, have produced enhanced rates of channel bed erosion along much of the channel (the order of 2 centimetres per year), as revealed by installed engineering works, such as armour stone blocks and gabion baskets. Erosion rates below drop structures are up to an order of magnitude faster. A year-long monitoring program revealed that weathering of the shale bed by wetting and drying cycles was primarily responsible for fragmenting the shale to a size (a few centimetres on the long axis) which could be removed by frequent and moderate high flows with a magnitude much less than the Mean Annual Flood. Channel bed quarrying of shale and limestone slabs, and the transport of larger clasts and meter dimension armour stones toppled from channel structures, require flood flows with a recurrence interval of about the Mean Annual Flood. Such flows are characterized by critical or supercritical flow conditions along the thalweg, and with velocities typically in the range 4 to 6 meters per second, they are well able to quarry the bed, and transport clasts up to metre dimension in size.

The Kolmården serpentine marble in Sweden, a building stone found at many levels in the society.

NASA Astrophysics Data System (ADS)

Wikström, Anders; Pereira, Dolores

2013-04-01

The Kolmården marble is a green serpentine marble of Svekofennian age (c. 1900 Ma). Serpentine is mainly secondary after diopside. The rock has been used as far back as in the 13th century. But it was mainly due to the start of the building of the Royal castles in Stockholm in the 17th century when the stone became more extensively used. The quarries were in operation until the 1970s and during the last years the production was so rationalized that one finds the stone in stairs, pavement and non structural ornaments within "common" houses all over the country. One can also find this stone in many exclusive places all over the world (e.g. the Paris Opera house, League of Nations building in Geneva, Leeds University Library, Uppsala University, Rockefeller Center, etc). The importance of this stone in international architecture, the good physical and mechanical behaviour observed in its emplacements and the possibilities for preservation of some of the quarries makes the Kolmården marble a good candidate as Global Stone Heritage Stone. The nomination will also trigger international publications on this natural stone to spread its knowledge among scientists and architects to be able to select this rock in case that some restoration on the mentioned important buildings is needed at some point.