Energy Sector Security through a System for Intelligent, Learning Network Configuration Monitoring and Management (“Essence”)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, Craig; Larmouth, Robert

The project was conceived and executed with the overarching objective to provide cost effective tools to cooperative utilities that enabled them to quickly detect, characterize and take remediative action against cyber attacks.

Cost-minimization analysis favors outpatient quick diagnosis unit over hospitalization for the diagnosis of potentially serious diseases.

PubMed

Sanclemente-Ansó, Carmen; Bosch, Xavier; Salazar, Albert; Moreno, Ramón; Capdevila, Cristina; Rosón, Beatriz; Corbella, Xavier

2016-05-01

Quick diagnosis units (QDUs) are a promising alternative to conventional hospitalization for the diagnosis of suspected serious diseases, most commonly cancer and severe anemia. Although QDUs are as effective as hospitalization in reaching a timely diagnosis, a full economic evaluation comparing both approaches has not been reported. To evaluate the costs of QDU vs. conventional hospitalization for the diagnosis of cancer and anemia using a cost-minimization analysis on the proven assumption that health outcomes of both approaches were equivalent. Patients referred to the QDU of Bellvitge University Hospital of Barcelona over 51 months with a final diagnosis of severe anemia (unrelated to malignancy), lymphoma, and lung cancer were compared with patients hospitalized for workup with the same diagnoses. The total cost per patient until diagnosis was analyzed. Direct and non-direct costs of QDU and hospitalization were compared. Time to diagnosis in QDU patients (n=195) and length-of-stay in hospitalized patients (n=237) were equivalent. There were considerable costs savings from hospitalization. Highest savings for the three groups were related to fixed direct costs of hospital stays (66% of total savings). Savings related to fixed non-direct costs of structural and general functioning were 33% of total savings. Savings related to variable direct costs of investigations were 1% of total savings. Overall savings from hospitalization of all patients were €867,719.31. QDUs appear to be a cost-effective resource for avoiding unnecessary hospitalization in patients with anemia and cancer. Internists, hospital executives, and healthcare authorities should consider establishing this model elsewhere. Copyright © 2015. Published by Elsevier B.V.

Increased energy efficiency of a steel foundry plant by using a cleaner production quick-E-scan methodology

NASA Astrophysics Data System (ADS)

Rasmeni, Zelda; Pan, Xiaowei

2017-07-01

The Quick-E-Scan methodology is a simple and quick method that is used to achieve operational energy efficiency as opposed to detailed energy audits, which therefore offers a no cost or less cost solutions for energy management programs with a limited budget. The quick-E-scan methodology was used to assesses a steel foundry plant based in Benoni through dividing the foundry into production sections which entailed a review of the current processes and usage patterns of energy within the plant and a detailed analysis of options available for improvement and profitable areas in which energy saving measures may be implemented for an increase energy efficiency which can be presented to management of the company.

LOCATING AREAS OF CONCERN

EPA Science Inventory

A simple method to locate changes in vegetation cover, which can be used to identify areas under stress. The method only requires inexpensive NDVI data. The use of remotely sensed data is far more cost-effective than field studies and can be performed more quickly. Local knowledg...

Cost Effective Use of Free-to-Use Apps in Neurosurgery (FAN) in Developing Countries: From Clinical Decision Making to Educational Courses, Strengthening Health Care Delivery.

PubMed

Thapa, Amit; Kc, Bidur; Shakya, Bikram

2016-11-01

Financial limitations and the scarcity of technological knowledge are a major hurdle to good communication platforms, data storage, and dissemination of medical knowledge in developing countries. Out of necessity we used free-to-use apps in our practice. We studied the applicability and cost effective aspect of a systematic use of these apps in neurosurgery. We designed the Free-to-use apps in neurosurgery (FAN) module in 4 phases at Kathmandu Medical College Teaching Hospital over the last 3 years. We used free apps like Viber, Dropbox, Skype, and VLC media player on 3G and Wi-Fi network. Users were trained in ethics and measures to ensure confidentiality and privacy of patient-related data. Endpoints studied were feasibility, reliability, cost effectiveness, and overall satisfaction of the users. In the FAN module, the Viber app was used to send pictures of digital images via smartphones within 30 minutes, enabling quick decisions by the consultants. Dropbox not only helped store images but also helped quick verification of discharge summaries as early as 15 minutes increasing overall efficiency. With Skype, consultants could be contacted even when they were abroad, and with the use of FAN they remain updated of their patients. By the use of Skype and VLC media player, 2 operative live workshops from abroad were transmitted live with good visual and audio reception, allowing question-and-answer sessions with the faculties. User satisfaction was more than 90%. The FAN module helped in quick reliable decision making, allowing for instantaneous communication and storing data and exchange of knowledge across countries. Copyright © 2016 Elsevier Inc. All rights reserved.

Development of a mix design process for cold-in-place rehabilitation using foamed asphalt.

DOT National Transportation Integrated Search

2003-12-01

This study evaluates one of the recycling techniques used to rehabilitate pavement, called Cold In-Place Recycling (CIR). CIR is one of the fastest growing road rehabilitation techniques because it is quick and cost-effective. The document reports on...

A simple technique of laparoscopic port closure.

PubMed

Aziz, Homayara Haque

2013-01-01

Laparoscopic and robotic surgery is widely practiced in modern medicine. The operative procedure is not complete until the port sites are closed with a fascial suture. We report a simple new technique that is easy, cost-effective, and quick to apply using 2 S-retractors for suture placement under direct visualization to secure the abdominal wall fascia and peritoneum. As a prospective consecutive case series, this technique was used for fascial closure after laparoscopy ports > 8 mm using 2 S-retractors. One S-retractor is used as a barrier protecting the contents of the abdominal cavity, reducing the risk of visceral injuries. The second S-retractor allows us to directly visualize the different layers, exposing the needle tip during its course through the fascia. This method was used in 100 patients with no intraoperative incidents, additional operative time, or need to access costly instruments. Currently, this technique is also used by many surgeons in our institution without any difficulty. No bowel injuries or port-site hernias were reported during a mean follow-up of 6 wk postoperation and 12-mo annual follow-up. The procedure is simple, easy, cost-effective, and quick to apply.

48 CFR 42.708 - Quick-closeout procedure.

Code of Federal Regulations, 2010 CFR

2010-10-01

... MANAGEMENT CONTRACT ADMINISTRATION AND AUDIT SERVICES Indirect Cost Rates 42.708 Quick-closeout procedure. (a... waive the 15 percent restriction based upon a risk assessment that considers the contractor's accounting...

Developing Rapid and Cost-Effective Tools for Assessing Groundwater Impacts on Contaminated Sediments

EPA Science Inventory

This research developed quick and inexpensive methods that can be useful in characterizing the interaction of water and solids within the GW/SW transition zone to explain processes that occur during physical contact between groundwater and sediments. The research used self-conta...

The Benefits of Guided Facility Self-Assessments

ERIC Educational Resources Information Center

O'Leary, Keith

2012-01-01

A growing number of educational institutions have discovered that a guided self-assessment solution helps them to consistently and cost-effectively obtain facility condition information and make better-informed capital planning decisions. Facility self-assessment employs a consistent, repeatable process for internal staff to quickly assess assets…

Considerations for Using Composite Pressure Vessels (CPVs) in Fuel Storage for Automotive Applications

NASA Technical Reports Server (NTRS)

Cone, Darren; Greene, Nathanael; Beeson, Harold; McCloskey, David

2013-01-01

Ongoing initiative to get high energy capacity "green fuel" containers to market quickly and cost effectively. The United States has decided to invest in "green energy" technology, to become energy independent, and to "Innovate Our Way to a Clean Energy Future."

Mind Map: a new way to teach patients and staff.

PubMed

Michelini, C A

2000-05-01

As home care agencies look for new ways to achieve patient outcomes and staff competencies in a cost-effective manner, Mind Map is a method that can be used to quickly organize patient and staff education while evaluating the learner's comprehension of critical information.

Effectiveness and cost of quick diagnostic tests to determine tetanus immunity in patients with a wound in French emergency departments.

PubMed

N'Diaye, Dieynaba S; Schwarzinger, Michaël; Obach, Dorothée; Poissy, Julien; Matheron, Sophie; Casalino, Enrique; Yazdanpanah, Yazdan

2014-11-19

Tétanos Quick Stick® (TQS) is a test for tetanus immunity screening for wounded patients in emergency departments (EDs), but represents additional costs compared with a medical interview on vaccination history. The study objective was to assess the effectiveness and cost of the TQS in French EDs. We performed a model-based analysis that simulates screening of tetanus immunity and risk of tetanus based on prophylaxis administration. Strategies compared were: i) diagnosis of tetanus immunity by "TQS"; ii) "Medical Interview" (current practice). The study population was 1,658,000 French adults seeking ED care for a wound in 2012. Model parameters were estimated based on French national surveillance data, and published literature. Outcome measures were number of tetanus cases, life years gained and costs (2012 €) from a societal perspective. Use of TQS had negligible impact on health outcomes (0.02 tetanus cases/year in France vs. 0.41 for "Medical Interview"), but resulted in a decrease in annual costs of €2,203,000 (-42%). Base case and sub-group analysis showed that with the same effectiveness, the average cost per patient was: €13 with "Medical Interview" vs. €11.7 with TQS for the overall cohort; €28.9 with "Medical Interview" vs. €21 with "TQS" for tetanus-prone wounds; €15 with "Medical Interview" vs. €14.1 with "TQS" for patients aged ≥65 years; and €6.2 with "Medical Interview" vs. €7.8 with "TQS" for non-tetanus-prone wounds. Use of TQS is as effective and less costly than "Medical Interview" when applied in ED to wounded patients with tetanus-prone wounds or aged ≥65 years. However, it is more expensive in patients with non-tetanus-prone wounds.

Field comparison of OraQuick® ADVANCE Rapid HIV-1/2 antibody test and two blood-based rapid HIV antibody tests in Zambia

PubMed Central

2012-01-01

Background Zambia’s national HIV testing algorithm specifies use of two rapid blood based antibody assays, Determine®HIV-1/2 (Inverness Medical) and if positive then Uni-GoldTM Recombigen HIV-1/2 (Trinity Biotech). Little is known about the performance of oral fluid based HIV testing in Zambia. The aims of this study are two-fold: 1) to compare the diagnostic accuracy (sensitivity and specificity) under field conditions of the OraQuick® ADVANCE® Rapid HIV-1/2 (OraSure Technologies, Inc.) to two blood-based rapid antibody tests currently in use in the Zambia National Algorithm, and 2) to perform a cost analysis of large-scale field testing employing the OraQuick®. Methods This was a operational retrospective research of HIV testing and questionnaire data collected in 2010 as part of the ZAMSTAR (Zambia South Africa TB and AIDS reduction) study. Randomly sampled individuals in twelve communities were tested consecutively with OraQuick® test using oral fluid versus two blood-based rapid HIV tests, Determine® and Uni-GoldTM. A cost analysis of four algorithms from health systems perspective were performed: 1) Determine® and if positive, then Uni-GoldTM (Determine®/Uni-GoldTM); based on current algorithm, 2) Determine® and if positive, then OraQuick® (Determine®/OraQuick®), 3) OraQuick® and if positive, then Determine® (OraQuick®/Determine®), 4) OraQuick® and if positive, then Uni-GoldTM (OraQuick®/Uni-GoldTM). This information was then used to construct a model using a hypothetical population of 5,000 persons with varying prevalence of HIV infection from 1–30%. Results 4,458 participants received both a Determine® and OraQuick® test. The sensitivity and specificity of the OraQuick® test were 98.7 (95%CI, 97.5–99.4) and 99.8 (95%CI, 99.6–99.9), respectively when compared to HIV positive serostatus. The average unit costs per algorithm were US$3.76, US$4.03, US$7.35, and US$7.67 for Determine®/Uni-GoldTM, Determine®/OraQuick®, OraQuick®/Determine®, and OraQuick®/Uni-GoldTM, respectively, for an HIV prevalence of 15%. Conclusions An alternative HIV testing algorithm could include OraQuick® test which had a high sensitivity and specificity. The current Determine®/Uni-GoldTM testing algorithm is the least expensive when compared to Determine®/OraQuick®, OraQuick®/Determine®, and OraQuick®/Uni-GoldTM in the Zambian setting. From our field experience, oral fluid based testing offers many advantages over blood-based testing, especially with self testing on the horizon. PMID:22871032

Implementation of GPS controlled highway construction equipment.

DOT National Transportation Integrated Search

2007-04-01

dozers, motor graders, and excavators is quickly becoming common place in private sector construction because it speeds project delivery and cuts costs. Use of this technology is expanding quickly into other construction equipment areas such as paver...

Similar Gender Dimorphism in the Costs of Reproduction across the Geographic Range of Fraxinus ornus

PubMed Central

Verdú, Miguel; Spanos, Kostas; čaňová, Ingrid; Slobodník, Branko; Paule, Ladislav

2007-01-01

Background and Aims The reproductive costs for individuals with the female function have been hypothesized to be greater than for those with the male function because the allocation unit per female flower is very high due to the necessity to nurture the embryos until seed dispersal occurs, while the male reproductive allocation per flower is lower because it finishes once pollen is shed. Consequently, males may invest more resources in growth than females. This prediction was tested across a wide geographical range in a tree with a dimorphic breeding system (Fraxinus ornus) consisting of males and hermaphrodites functioning as females. The contrasting ecological conditions found across the geographical range allowed the evaluation of the hypothesis that the reproductive costs of sexual dimorphism varies with environmental stressors. Methods By using random-effects meta-analysis, the differences in the reproductive and vegetative investment of male and hermaphrodite trees of F. ornus were analysed in 10 populations from the northern (Slovakia), south-eastern (Greece) and south-western (Spain) limits of its European distribution. The variation in gender-dimorphism with environmental stress was analysed by running a meta-regression between these effect sizes and the two environmental stress indicators: one related to temperature (the frost-free period) and another related to water availability (moisture deficit). Key Results Most of the effect sizes showed that males produced more flowers and grew more quickly than hermaphrodites. Gender differences in reproduction and growth were not minimized or maximized under adverse climatic conditions such as short frost-free periods or severe aridity. Conclusions The lower costs of reproduction for F. ornus males allow them to grow more quickly than hermaphrodites, although such differences in sex-specific reproductive costs are not magnified under stressful conditions. PMID:17098751

Rapid E-Learning Simulation Training and User Response

ERIC Educational Resources Information Center

Rackler, Angeline

2011-01-01

A new trend in e-learning development is to have subject matter experts use rapid development tools to create training simulations. This type of training is called rapid e-learning simulation training. Though companies are using rapid development tools to create training quickly and cost effectively, there is little empirical research to indicate…

What Works Clearinghouse Quick Review: "Expanding College Opportunities for High-Achieving, Low Income Students"

ERIC Educational Resources Information Center

What Works Clearinghouse, 2013

2013-01-01

This study examined the effects of providing low-income, high-achieving high school seniors with college application guidance and information about the costs of college. The "application guidance" included information about deadlines and requirements for college applications at nearby institutions, at the state's flagship institution, and at in-…

Bakeout Chamber Within Vacuum Chamber

NASA Technical Reports Server (NTRS)

Taylor, Daniel M.; Soules, David M.; Barengoltz, Jack B.

1995-01-01

Vacuum-bakeout apparatus for decontaminating and measuring outgassing from pieces of equipment constructed by mounting bakeout chamber within conventional vacuum chamber. Upgrade cost effective: fabrication and installation of bakeout chamber simple, installation performed quickly and without major changes in older vacuum chamber, and provides quantitative data on outgassing from pieces of equipment placed in bakeout chamber.

Personalized Boosters for a Computerized Intervention Targeting College Drinking: The Influence of Protective Behavioral Strategies

ERIC Educational Resources Information Center

Braitman, Abby L.; Henson, James M.

2016-01-01

Objective: Computerized interventions are cost-effective and can quickly deliver individual feedback to many students. However, in-person interventions are more efficacious. The current study sought to improve the efficacy of a popular online intervention via e-mailed boosters with personalized feedback. Participants: Participants were 213 student…

Evolving Approaches and Technologies to Enhance the Role of Ecological Modeling in Decision Making

Treesearch

Eric Gustafson; John Nestler; Louis Gross; Keith M. Reynolds; Daniel Yaussy; Thomas P. Maxwell; Virginia H. Dale

2002-01-01

Understanding the effects of management activities is difficult for natural resource managers and decision makers because ecological systems are highly complex and their behavior is difficult to predict. Furthermore, the empirical studies necessary to illuminate all management questions quickly become logistically complicated and cost prohibitive. Ecological models...

Asphalt Pavements Session 2E-3 : Warm Mix Asphalt : Laboratory Evaluation and Pavement Design [SD .WMV (720x480/29fps/218.0 MB)

DOT National Transportation Integrated Search

2003-12-01

This study evaluates one of the recycling techniques used to rehabilitate pavement, called Cold In-Place Recycling (CIR). CIR is one of the fastest growing road rehabilitation techniques because it is quick and cost-effective. The document reports on...

Rotavirus vaccination for Hong Kong children: an economic evaluation from the Hong Kong Government perspective.

PubMed

Ho, A M-H; Nelson, E A S; Walker, D G

2008-01-01

To perform an economic analysis of government-funded universal rotavirus vaccination in Hong Kong from the government's perspective. A Markov model of costs and effects (disability averted) associated with universal vaccination was compared with no vaccination. In both strategies, newborns were studied until 5 years of age or until they died, using cost, probability and utility data from the literature. The potential cost savings and cost effectiveness of vaccination were calculated and their sensitivities to changes in vaccine and health care costs, presumed decline in vaccine efficacy over time, and the use of discounting and age weights were determined. Depending on assumptions, the new rotavirus vaccines would be cost saving to the Hong Kong Government if they cost less than US$40-92 per course. Higher vaccine costs would quickly lead to an incremental cost-effectiveness ratio exceeding that of the gross national product per capita if the mortality rate of rotavirus gastroenteritis remained at zero. Based on 2002 demographic, cost and morbidity data and reasonable uncertainty estimates of these variables, a universal rotavirus vaccination programme paid for by the Hong Kong Government is cost neutral at a per course vaccine cost of US$40-92. For a fixed vaccine cost, the potential savings and cost effectiveness of the vaccine increase with higher estimated health care costs and vice versa.

How Can It Cost That Much? A Three-Year Study of Proposal Production Costs.

ERIC Educational Resources Information Center

Wiese, W. C.; Bowden, C. Mal

1997-01-01

Examines significant new business proposal efforts for United States Department of Defense contracts. Identifies six "pillars" of a contractor's proposal preparation costs. Derives a formula that characterizes proposal preparation costs. Demonstrates that a quick, accurate cost model can be developed for proposal publishing. (RS)

A design aid for determining width of filter strips

Treesearch

M.G. Dosskey; M.J. Helmers; D.E. Eisenhauer

2008-01-01

watershed planners need a tool for determining width of filter strips that is accurate enough for developing cost-effective site designs and easy enough to use for making quick determinations on a large number and variety of sites.This study employed the process-based Vegetative Filter Strip Model to evaluate the relationship between filter strip width and trapping...

Asphalt Pavements Session 2E-1 : Development of Mix Design Process for Cold-In-Place Recycling [SD .WMV (720x480/29fps/203.0 MB)

DOT National Transportation Integrated Search

2003-12-01

This study evaluates one of the recycling techniques used to rehabilitate pavement, called Cold In-Place Recycling (CIR). CIR is one of the fastest growing road rehabilitation techniques because it is quick and cost-effective. The document reports on...

Asphalt Pavements Session 2E-2 : Missouri's Use of Recycled Asphalt Shingles in Hot Asphalt [SD .WMV (720x480/29fps/289.0 MB)

DOT National Transportation Integrated Search

2003-12-01

This study evaluates one of the recycling techniques used to rehabilitate pavement, called Cold In-Place Recycling (CIR). CIR is one of the fastest growing road rehabilitation techniques because it is quick and cost-effective. The document reports on...

Claim audits: a relic of the indemnity age?

PubMed

Ellender, D E

1997-09-01

Traditional claim audits offering quick fixes to specific problems or to recover overpayments will not provide benefit managers with the data and action plan they need to make informed decisions about cost-effective benefit administration. Today's benefits environment calls for a comprehensive review of claim administration, incorporating traditional audit techniques into a quality improvement audit process.

Life support system cost study: Addendum to cost analysis of carbon dioxide concentrators

NASA Technical Reports Server (NTRS)

Yakut, M. M.

1973-01-01

New cost data are presented for the Hydrogen-Depolarized Carbon Dioxide Concentrator (HDC), based on modifying the concentrator to delete the quick disconnect valves and filters included in the system model defined in MDC-G4631. System description, cost data and a comparison between CO2 concentrator costs are presented.

Planetary sample rapid recovery and handling

NASA Technical Reports Server (NTRS)

1985-01-01

Methods for recovering and cost effectively handling planetary samples following return to the vicinity of Earth were designed for planetary mission planners. Three topics are addressed: (1) a rough cost estimate was produced for each of a series of options for the handling of planetary samples following their return to the vicinity of Earth; (2) the difficulty of quickly retrieving planetary samples from low circular and high elliptical Earth orbit is assessed; and (3) a conceptual design for a biological isolation and thermal control system for the returned sample and spacecraft is developed.

How much domestic quick response manufacturing can a business afford?

NASA Astrophysics Data System (ADS)

Warburton, Roger D. H.; Warner, Steven B.

2000-10-01

Employment in the U.S. apparel industry has declined dramatically since the 1960s. Will it fall inexorably to zero, or is there some base level that can endure? If so, what strategic characteristics are required to survive? There is considerable interest in Quick Response Manufacturing (QRM), not only as a reason to support domestic manufacturing, but also as part of the larger goal of reducing supply chain costs. However, since Domestic Manufacturing is more expensive, why should anyone bother considering it? This paper presents an analytical model of a team approach that includes both domestic and offshore manufacturing. Despite the additional costs associated with U.S. manufacturing, our model predicts that including a domestic contractor is legitimate and cost effective. However, the alliance must be genuinely cooperative. A partnership has to be established early in the retailer's planning cycle, and the manufacturer should participate in the planning. Also, sharing data and making timely decisions imposes a strategic business approach, and the model allows us to describe the characteristic roles and capabilities required. Using this model for guidance, we anticipate that retailers will have the stock to satisfy more customers with fewer markdowns, while manufacturers will see increased margins and lower inventories.

Capital cost expenditure of high temperature latent and sensible thermal energy storage systems

NASA Astrophysics Data System (ADS)

Jacob, Rhys; Saman, Wasim; Bruno, Frank

2017-06-01

In the following study cost estimates have been undertaken for an encapsulated phase change material (EPCM) packed bed, a packed bed thermocline and a traditional two-tank molten salt system. The effect of various heat transfer fluids (air and molten salt), system configuration (cascade vs one PCM, and direct vs indirect) and temperature difference (ΔT = 100-500 °C) on the cost estimate of the system was also investigated. Lastly, the storage system boundary was expanded to include heat exchangers, pumps and fans, and heat tracing so that a thorough cost comparison could be undertaken. The results presented in this paper provide a methodology to quickly compare various systems and configurations while providing design limits for the studied technologies.

SideRack: A Cost-Effective Addition to Commercial Zebrafish Housing Systems

PubMed Central

Burg, Leonard; Gill, Ryan; Balciuniene, Jorune

2014-01-01

Abstract Commercially available aquatic housing systems provide excellent and relatively trouble-free hardware for rearing and housing juvenile as well as adult zebrafish. However, the cost of such systems is quite high and potentially prohibitive for smaller educational and research institutions. The need for tank space prompted us to experiment with various additions to our existing Aquaneering system. We also noted that high water exchange rates typical in commercial systems are suboptimal for quick growth of juvenile fish. We devised a housing system we call “SideRack,” which contains 20 large tanks with air supply and slow water circulation. It enables cost-effective expansion of existing fish facility, with a key additional benefit of increased growth and maturation rates of juvenile fish. PMID:24611601

Fast and Cost-Effective Biochemical Spectrophotometric Analysis of Solution of Insect "Blood" and Body Surface Elution.

PubMed

Łoś, Aleksandra; Strachecka, Aneta

2018-05-09

Using insect hemolymph ("blood") and insect body surface elutions, researchers can perform rapid and cheap biochemical analyses to determine the insect's immunology status. The authors of this publication describe a detailed methodology for a quick marking of the concentration of total proteins and evaluation of the proteolytic system activity (acid, neutral, and alkaline proteases and protease inhibitors), as well as a methodology for quick "liver" tests in insects: alanine aminotransferase (ALT), aspartate aminotransferase (AST), alkaline phosphatase (ALP), and urea and glucose concentration analyses. The meaning and examples of an interpretation of the results of the presented methodology for biochemical parameter determination are described for the example of honey bees.

Torching the Haystack: modelling fast-fail strategies in drug development.

PubMed

Lendrem, Dennis W; Lendrem, B Clare

2013-04-01

By quickly clearing the development pipeline of failing or marginal products, fast-fail strategies release resources to focus on more promising molecules. The Quick-Kill model of drug development demonstrates that fast-fail strategies will: (1) reduce the expected time to market; (2) reduce expected R&D costs; and (3) increase R&D productivity. This paper outlines the model and demonstrates the impact of fast-fail strategies. The model is illustrated with costs and risks data from pharmaceutical and biopharmaceutical companies. Copyright © 2012 Elsevier Ltd. All rights reserved.

Innovative approach for low-cost quick-access small payload missions

NASA Astrophysics Data System (ADS)

Friis, Jan W., Jr.

2000-11-01

A significant part of the burgeoning commercial space industry is placing an unprecedented number of satellites into low earth orbit for a variety of new applications and services. By some estimates the commercial space industry now exceeds that of government space activities. Yet the two markets remain largely separate, with each deploying dedicated satellites and infrastructure for their respective missions. One commercial space firm, Final Analysis, has created a new program wherein either government, scientific or new technology payloads can be integrated on a commercial spacecraft on commercial satellites for a variety of mission scenarios at a fraction of the cost of a dedicated mission. NASA has recognized the advantage of this approach, and has awarded the Quick Ride program to provide frequent, low cost flight opportunities for small independent payloads aboard the Final Analysis constellation, and investigators are rapidly developing science programs that conform to the proposed payload accommodations envelope. Missions that were not feasible using dedicated launches are now receiving approval under the lower cost Quick Ride approach. Final Analysis has dedicated ten out of its thirty-eight satellites in support of the Quick Ride efforts. The benefit of this type of space access extend beyond NASA science programs. Commercial space firms can now gain valuable flight heritage for new technology and satellite product offerings. Further, emerging international space programs can now place a payload in orbit enabling the country to allocate its resources against the payload and mission requirements rather htan increased launch costs of a dedicated spacecraft. Finally, the low cost nature provides University-based research educational opportunities previously out of the reach of most space-related budgets. This paper will describe the motivation, benefits, technical features, and program costs of the Final Analysis secondary payload program. Payloads can be accommodated on up to thirty-eight separate satellites. Since the secondary payloads will fly on satellites designed for global wireless data services, each user can utilize low cost communication system already in place for sending and retrieving digital information from its payload.

Nanotechnology in Aerospace Applications

DTIC Science & Technology

2007-03-01

CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING...logic and memory chips, sensors, catalyst support, adsorption media, actuators, etc. All early works in nanoelectronics use CNTs as a conducting...inspection cost effectively , quickly, and efficiently than the present procedures, composites, wear resistant tires, improved avionics, satellite

Ecological investigations to select mitigation options to reduce vehicle-caused mortality of a threatened butterfly

Treesearch

Sara B. Zielin; Jalene Littlejohn; Catherine E. de Rivera; Winston P. Smith; Sandra L. Jacobson

2016-01-01

Whereas roads that bisect habitat are known to decrease population size through animal-vehicle collisions or interruption of key life history events, it is not always obvious how to reduce such impacts, especially for flying organisms. We needed a quick, cost-efficient and effective way to determine how best to decrease vehicle-caused mortality while maintaining...

Teach the Way They Learn: 62 Easy, Engaging, & Effective Language Arts Activities

ERIC Educational Resources Information Center

Hines, Joanne I; Vincent, Pamela J.

2005-01-01

This book focuses on quick and easy language arts activities to inspire and motivate students in kindergarten to sixth grades. Ingenious ideas appeal to children's enthusiasm for games, parades, race cars, their own names, and much more. The activities cost little or nothing. They engage young learners, and they work! This book is perfect for a…

Investing in International Information Exchange Activities to Improve the Safety, Cost Effectiveness and Schedule of Cleanup - 13281

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seed, Ian; James, Paula; Mathieson, John

2013-07-01

With decreasing budgets and increasing pressure on completing cleanup missions as quickly, safely and cost-effectively as possible, there is significant benefit to be gained from collaboration and joint efforts between organizations facing similar issues. With this in mind, the US Department of Energy (DOE) and the UK Nuclear Decommissioning Authority (NDA) have formally agreed to share information on lessons learned on the development and application of new technologies and approaches to improve the safety, cost effectiveness and schedule of the cleanup legacy wastes. To facilitate information exchange a range of tools and methodologies were established. These included tacit knowledge exchangemore » through facilitated meetings, conference calls and Site visits as well as explicit knowledge exchange through document sharing and newsletters. A DOE web-based portal has been established to capture these exchanges and add to them via discussion boards. The information exchange is operating at the Government-to-Government strategic level as well as at the Site Contractor level to address both technical and managerial topic areas. This effort has resulted in opening a dialogue and building working relationships. In some areas joint programs of work have been initiated thus saving resource and enabling the parties to leverage off one another activities. The potential benefits of high quality information exchange are significant, ranging from cost avoidance through identification of an approach to a problem that has been proven elsewhere to cost sharing and joint development of a new technology to address a common problem. The benefits in outcomes significantly outweigh the costs of the process. The applicability of the tools and methods along with the lessons learned regarding some key issues is of use to any organization that wants to improve value for money. In the waste management marketplace, there are a multitude of challenges being addressed by multiple organizations and the effective pooling and exchange of knowledge and experience can only be of benefit to all participants to help complete the cleanup mission more quickly and more cost effectively. This paper examines in detail the tools and processes used to promote information exchange and the progress made to date. It also discusses the challenges and issues involved and proposes recommendations to others who are involved in similar activities. (authors)« less

Cost-Effective Control of Infectious Disease Outbreaks Accounting for Societal Reaction.

PubMed

Fast, Shannon M; González, Marta C; Markuzon, Natasha

2015-01-01

Studies of cost-effective disease prevention have typically focused on the tradeoff between the cost of disease transmission and the cost of applying control measures. We present a novel approach that also accounts for the cost of social disruptions resulting from the spread of disease. These disruptions, which we call social response, can include heightened anxiety, strain on healthcare infrastructure, economic losses, or violence. The spread of disease and social response are simulated under several different intervention strategies. The modeled social response depends upon the perceived risk of the disease, the extent of disease spread, and the media involvement. Using Monte Carlo simulation, we estimate the total number of infections and total social response for each strategy. We then identify the strategy that minimizes the expected total cost of the disease, which includes the cost of the disease itself, the cost of control measures, and the cost of social response. The model-based simulations suggest that the least-cost disease control strategy depends upon the perceived risk of the disease, as well as media intervention. The most cost-effective solution for diseases with low perceived risk was to implement moderate control measures. For diseases with higher perceived severity, such as SARS or Ebola, the most cost-effective strategy shifted toward intervening earlier in the outbreak, with greater resources. When intervention elicited increased media involvement, it remained important to control high severity diseases quickly. For moderate severity diseases, however, it became most cost-effective to implement no intervention and allow the disease to run its course. Our simulation results imply that, when diseases are perceived as severe, the costs of social response have a significant influence on selecting the most cost-effective strategy.

Cost-Effective Control of Infectious Disease Outbreaks Accounting for Societal Reaction

PubMed Central

Fast, Shannon M.; González, Marta C.; Markuzon, Natasha

2015-01-01

Background Studies of cost-effective disease prevention have typically focused on the tradeoff between the cost of disease transmission and the cost of applying control measures. We present a novel approach that also accounts for the cost of social disruptions resulting from the spread of disease. These disruptions, which we call social response, can include heightened anxiety, strain on healthcare infrastructure, economic losses, or violence. Methodology The spread of disease and social response are simulated under several different intervention strategies. The modeled social response depends upon the perceived risk of the disease, the extent of disease spread, and the media involvement. Using Monte Carlo simulation, we estimate the total number of infections and total social response for each strategy. We then identify the strategy that minimizes the expected total cost of the disease, which includes the cost of the disease itself, the cost of control measures, and the cost of social response. Conclusions The model-based simulations suggest that the least-cost disease control strategy depends upon the perceived risk of the disease, as well as media intervention. The most cost-effective solution for diseases with low perceived risk was to implement moderate control measures. For diseases with higher perceived severity, such as SARS or Ebola, the most cost-effective strategy shifted toward intervening earlier in the outbreak, with greater resources. When intervention elicited increased media involvement, it remained important to control high severity diseases quickly. For moderate severity diseases, however, it became most cost-effective to implement no intervention and allow the disease to run its course. Our simulation results imply that, when diseases are perceived as severe, the costs of social response have a significant influence on selecting the most cost-effective strategy. PMID:26288274

Threshold analysis of reimbursing physicians for the application of fluoride varnish in young children.

PubMed

Hendrix, Kristin S; Downs, Stephen M; Brophy, Ginger; Carney Doebbeling, Caroline; Swigonski, Nancy L

2013-01-01

Most state Medicaid programs reimburse physicians for providing fluoride varnish, yet the only published studies of cost-effectiveness do not show cost-savings. Our objective is to apply state-specific claims data to an existing published model to quickly and inexpensively estimate the cost-savings of a policy consideration to better inform decisions - specifically, to assess whether Indiana Medicaid children's restorative service rates met the threshold to generate cost-savings. Threshold analysis was based on the 2006 model by Quiñonez et al. Simple calculations were used to "align" the Indiana Medicaid data with the published model. Quarterly likelihoods that a child would receive treatment for caries were annualized. The probability of a tooth developing a cavitated lesion was multiplied by the probability of using restorative services. Finally, this rate of restorative services given cavitation was multiplied by 1.5 to generate the threshold to attain cost-savings. Restorative services utilization rates, extrapolated from available Indiana Medicaid claims, were compared with these thresholds. For children 1-2 years old, restorative services utilization was 2.6 percent, which was below the 5.8 percent threshold for cost-savings. However, for children 3-5 years of age, restorative services utilization was 23.3 percent, exceeding the 14.5 percent threshold that suggests cost-savings. Combining a published model with state-specific data, we were able to quickly and inexpensively demonstrate that restorative service utilization rates for children 36 months and older in Indiana are high enough that fluoride varnish regularly applied by physicians to children starting at 9 months of age could save Medicaid funds over a 3-year horizon. © 2013 American Association of Public Health Dentistry.

Benefits of advanced space suits for supporting routine extravehicular activity

NASA Technical Reports Server (NTRS)

Alton, L. R.; Bauer, E. H.; Patrick, J. W.

1975-01-01

Technology is available to produce space suits providing a quick-reaction, safe, much more mobile extravehicular activity (EVA) capability than before. Such a capability may be needed during the shuttle era because the great variety of missions and payloads complicates the development of totally automated methods of conducting operations and maintenance and resolving contingencies. Routine EVA now promises to become a cost-effective tool as less complex, serviceable, lower-cost payload designs utilizing this capability become feasible. Adoption of certain advanced space suit technologies is encouraged for reasons of economics as well as performance.

Medical tourism and reproductive outsourcing: the dawning of a new paradigm for healthcare.

PubMed

Jones, C A; Keith, L G

2006-01-01

Medical tourism, a term that also can be used to describe medical outsourcing, is characterized by travel away from one's home region to procure treatment in another. It may take one of two forms: obligatory or elective. The former occurs when necessary treatments are unavailable or illegal in the place of origin. The latter includes elective and medically indicated procedures that, although available at the place of origin, may be delivered more quickly or in a more cost-effective manner in another location. Reproductive outsourcing is a special form of medical tourism that has quickly become an important area of present-day medicine because the changes of the last four decades have left all but the most advanced fertility centers breathless as they try to adjust their treatment protocols in effective and ethical manners. Legal and policy limitations have created a global environment where, in a rising number of instances, individuals and couples must travel elsewhere to procure fertility procedures that are unavailable back home. With low cost airfares to and from America, a growing number of "medical cartographers" have set out to map which places are the "best" (in terms of cost, effectiveness and timeliness), for what procedures, and for whom. On the other hand, physicians, legal experts and policy makers have only begun to shape how government and health care agencies should formally guide or regulate medical tourism. In doing so, a number of factors may challenge the limits of ethics, policy and legality in this most important trend in modern medicine.

Quick Estimation Model for the Concentration of Indoor Airborne Culturable Bacteria: An Application of Machine Learning.

PubMed

Liu, Zhijian; Li, Hao; Cao, Guoqing

2017-07-30

Indoor airborne culturable bacteria are sometimes harmful to human health. Therefore, a quick estimation of their concentration is particularly necessary. However, measuring the indoor microorganism concentration (e.g., bacteria) usually requires a large amount of time, economic cost, and manpower. In this paper, we aim to provide a quick solution: using knowledge-based machine learning to provide quick estimation of the concentration of indoor airborne culturable bacteria only with the inputs of several measurable indoor environmental indicators, including: indoor particulate matter (PM 2.5 and PM 10 ), temperature, relative humidity, and CO₂ concentration. Our results show that a general regression neural network (GRNN) model can sufficiently provide a quick and decent estimation based on the model training and testing using an experimental database with 249 data groups.

Control of non-linear actuator of artificial muscles for the use in low-cost robotics prosthetics limbs

NASA Astrophysics Data System (ADS)

Anis Atikah, Nurul; Yeng Weng, Leong; Anuar, Adzly; Chien Fat, Chau; Sahari, Khairul Salleh Mohamed; Zainal Abidin, Izham

2017-10-01

Currently, the methods of actuating robotic-based prosthetic limbs are moving away from bulky actuators to more fluid materials such as artificial muscles. The main disadvantages of these artificial muscles are their high cost of manufacturing, low-force generation, cumbersome and complex controls. A recent discovery into using super coiled polymer (SCP) proved to have low manufacturing costs, high force generation, compact and simple controls. Nevertheless, the non-linear controls still exists due to the nature of heat-based actuation, which is hysteresis. This makes position control difficult. Using electrically conductive devices allows for very quick heating, but not quick cooling. This research tries to solve the problem by using peltier devices, which can effectively heat and cool the SCP, hence giving way to a more precise control. The peltier device does not actively introduce more energy to a volume of space, which the coiled heating does; instead, it acts as a heat pump. Experiments were conducted to test the feasibility of using peltier as an actuating method on different diameters of nylon fishing strings. Based on these experiments, the performance characteristics of the strings were plotted, which could be used to control the actuation of the string efficiently in the future.

Mapping surface disturbance of energy-related infrastructure in southwest Wyoming--An assessment of methods

USGS Publications Warehouse

Germaine, Stephen S.; O'Donnell, Michael S.; Aldridge, Cameron L.; Baer, Lori; Fancher, Tammy; McBeth, Jamie; McDougal, Robert R.; Waltermire, Robert; Bowen, Zachary H.; Diffendorfer, James; Garman, Steven; Hanson, Leanne

2012-01-01

We evaluated how well three leading information-extraction software programs (eCognition, Feature Analyst, Feature Extraction) and manual hand digitization interpreted information from remotely sensed imagery of a visually complex gas field in Wyoming. Specifically, we compared how each mapped the area of and classified the disturbance features present on each of three remotely sensed images, including 30-meter-resolution Landsat, 10-meter-resolution SPOT (Satellite Pour l'Observation de la Terre), and 0.6-meter resolution pan-sharpened QuickBird scenes. Feature Extraction mapped the spatial area of disturbance features most accurately on the Landsat and QuickBird imagery, while hand digitization was most accurate on the SPOT imagery. Footprint non-overlap error was smallest on the Feature Analyst map of the Landsat imagery, the hand digitization map of the SPOT imagery, and the Feature Extraction map of the QuickBird imagery. When evaluating feature classification success against a set of ground-truthed control points, Feature Analyst, Feature Extraction, and hand digitization classified features with similar success on the QuickBird and SPOT imagery, while eCognition classified features poorly relative to the other methods. All maps derived from Landsat imagery classified disturbance features poorly. Using the hand digitized QuickBird data as a reference and making pixel-by-pixel comparisons, Feature Extraction classified features best overall on the QuickBird imagery, and Feature Analyst classified features best overall on the SPOT and Landsat imagery. Based on the entire suite of tasks we evaluated, Feature Extraction performed best overall on the Landsat and QuickBird imagery, while hand digitization performed best overall on the SPOT imagery, and eCognition performed worst overall on all three images. Error rates for both area measurements and feature classification were prohibitively high on Landsat imagery, while QuickBird was time and cost prohibitive for mapping large spatial extents. The SPOT imagery produced map products that were far more accurate than Landsat and did so at a far lower cost than QuickBird imagery. Consideration of degree of map accuracy required, costs associated with image acquisition, software, operator and computation time, and tradeoffs in the form of spatial extent versus resolution should all be considered when evaluating which combination of imagery and information-extraction method might best serve any given land use mapping project. When resources permit, attaining imagery that supports the highest classification and measurement accuracy possible is recommended.

Quick, easy, cheap, effective, rugged, and safe sample preparation approach for pesticide residue analysis using traditional detectors in chromatography: A review.

PubMed

Rahman, Md Musfiqur; Abd El-Aty, A M; Kim, Sung-Woo; Shin, Sung Chul; Shin, Ho-Chul; Shim, Jae-Han

2017-01-01

In pesticide residue analysis, relatively low-sensitivity traditional detectors, such as UV, diode array, electron-capture, flame photometric, and nitrogen-phosphorus detectors, have been used following classical sample preparation (liquid-liquid extraction and open glass column cleanup); however, the extraction method is laborious, time-consuming, and requires large volumes of toxic organic solvents. A quick, easy, cheap, effective, rugged, and safe method was introduced in 2003 and coupled with selective and sensitive mass detectors to overcome the aforementioned drawbacks. Compared to traditional detectors, mass spectrometers are still far more expensive and not available in most modestly equipped laboratories, owing to maintenance and cost-related issues. Even available, traditional detectors are still being used for analysis of residues in agricultural commodities. It is widely known that the quick, easy, cheap, effective, rugged, and safe method is incompatible with conventional detectors owing to matrix complexity and low sensitivity. Therefore, modifications using column/cartridge-based solid-phase extraction instead of dispersive solid-phase extraction for cleanup have been applied in most cases to compensate and enable the adaptation of the extraction method to conventional detectors. In gas chromatography, the matrix enhancement effect of some analytes has been observed, which lowers the limit of detection and, therefore, enables gas chromatography to be compatible with the quick, easy, cheap, effective, rugged, and safe extraction method. For liquid chromatography with a UV detector, a combination of column/cartridge-based solid-phase extraction and dispersive solid-phase extraction was found to reduce the matrix interference and increase the sensitivity. A suitable double-layer column/cartridge-based solid-phase extraction might be the perfect solution, instead of a time-consuming combination of column/cartridge-based solid-phase extraction and dispersive solid-phase extraction. Therefore, replacing dispersive solid-phase extraction with column/cartridge-based solid-phase extraction in the cleanup step can make the quick, easy, cheap, effective, rugged, and safe extraction method compatible with traditional detectors for more sensitive, effective, and green analysis. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

An Exploratory Study of Cost Engineering in Axiomatic Design: Creation of the Cost Model Based on an FR-DP Map

NASA Technical Reports Server (NTRS)

Lee, Taesik; Jeziorek, Peter

2004-01-01

Large complex projects cost large sums of money throughout their life cycle for a variety of reasons and causes. For such large programs, the credible estimation of the project cost, a quick assessment of the cost of making changes, and the management of the project budget with effective cost reduction determine the viability of the project. Cost engineering that deals with these issues requires a rigorous method and systematic processes. This paper introduces a logical framework to a&e effective cost engineering. The framework is built upon Axiomatic Design process. The structure in the Axiomatic Design process provides a good foundation to closely tie engineering design and cost information together. The cost framework presented in this paper is a systematic link between the functional domain (FRs), physical domain (DPs), cost domain (CUs), and a task/process-based model. The FR-DP map relates a system s functional requirements to design solutions across all levels and branches of the decomposition hierarchy. DPs are mapped into CUs, which provides a means to estimate the cost of design solutions - DPs - from the cost of the physical entities in the system - CUs. The task/process model describes the iterative process ot-developing each of the CUs, and is used to estimate the cost of CUs. By linking the four domains, this framework provides a superior traceability from requirements to cost information.

Planning and Implementing a Hospital Recycling Program at Naval Hospital, Camp Pendleton, California

DTIC Science & Technology

1992-08-01

communities have refused to license incinerators, saying "not in my back yard!" Recycling is quick, it’s economical, it can save natural resources, and...total costs - total credits) 4. Net Savings <Costs>: Present disposal Net recycling Net savings costs program costs <costs> * Assign only a...RECYCLING PROGRAM COSTS $ 9,739 (total costs - total credits) 4. Net Savings <Costs>: $ 9.287 _ $ 9.739 - S > Present disposal Net recycling Net

Offshore Wind Energy Systems

ERIC Educational Resources Information Center

Musgrove, P.

1978-01-01

Explores the possibility of installing offshore windmills to provide electricity and to save fuel for the United Kingdom. Favors their deployment in clusters to facilitate supervision and minimize cost. Discusses the power output and the cost involved and urges their quick development. (GA)

It's a Matter of Principle

ERIC Educational Resources Information Center

Furlong, Cerys

2010-01-01

As the new Minister for Education, Lifelong Learning and Skills and Wales, Leighton Andrews takes his first major decision, that is, commissioning a review of the cost of administering education in Wales with the aim of establishing "quick wins" from the costs of administering education. The author argues that plans to review the cost of…

Computer assisted yarding cost analysis.

Treesearch

Ronald W. Mifflin

1980-01-01

Programs for a programable calculator and a desk-top computer are provided for quickly determining yarding cost and comparing the economics of alternative yarding systems. The programs emphasize the importance of the relationship between production rate and machine rate, which is the hourly cost of owning and operating yarding equipment. In addition to generating the...

Delivering Extension to the Living Room Using Internet TV

ERIC Educational Resources Information Center

Rice, Grant G., III

2014-01-01

Television is a widely adopted source for viewing educational information. Unfortunately, producing a television show on network television can be costly and time consuming. Internet TV offers Extension video content producers the opportunity to create a niche topic channel quickly and at low cost. Internet TV offers viewers a low-cost and…

Development of cost-effective Hordeum chilense DNA markers: molecular aids for marker-assisted cereal breeding.

PubMed

Hernández, P; Dorado, G; Ramírez, M C; Laurie, D A; Snape, J W; Martín, A

2003-01-01

Hordeum chilense is a potential source of useful genes for wheat breeding. The use of this wild species to increase genetic variation in wheat will be greatly facilitated by marker-assisted introgression. In recent years, the search for the most suitable DNA marker system for tagging H. chilense genomic regions in a wheat background has lead to the development of RAPD and SCAR markers for this species. RAPDs represent an easy way of quickly generating suitable introgression markers, but their use is limited in heterogeneous wheat genetic backgrounds. SCARs are more specific assays, suitable for automatation or multiplexing. Direct sequencing of RAPD products is a cost-effective approach that reduces labour and costs for SCAR development. The use of SSR and STS primers originally developed for wheat and barley are additional sources of genetic markers. Practical applications of the different marker approaches for obtaining derived introgression products are described.

Quick Estimation Model for the Concentration of Indoor Airborne Culturable Bacteria: An Application of Machine Learning

PubMed Central

Liu, Zhijian; Li, Hao; Cao, Guoqing

2017-01-01

Indoor airborne culturable bacteria are sometimes harmful to human health. Therefore, a quick estimation of their concentration is particularly necessary. However, measuring the indoor microorganism concentration (e.g., bacteria) usually requires a large amount of time, economic cost, and manpower. In this paper, we aim to provide a quick solution: using knowledge-based machine learning to provide quick estimation of the concentration of indoor airborne culturable bacteria only with the inputs of several measurable indoor environmental indicators, including: indoor particulate matter (PM2.5 and PM10), temperature, relative humidity, and CO2 concentration. Our results show that a general regression neural network (GRNN) model can sufficiently provide a quick and decent estimation based on the model training and testing using an experimental database with 249 data groups. PMID:28758941

A feasibility study to determine if there is a market for automatic meter-reading devices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hilberg, G.R.

1996-08-01

For many utilities the cost of manually reading meters is increasing due to personnel expenses and equipment costs. The current system of manual meters provides little ability for the utility to reduce costs. To reduce meter reading costs the utility must automate the manual system and reduce personnel expenses. A water utility in San Diego county was studied to calculate the cost of reading individual water meters. This would allow for the selective replacement of {open_quotes}high-cost{close_quotes} meters to quickly reduce meter-reading costs while limiting the necessary capital investments. As the {open_quotes}high-cost{close_quotes} meters are selectively replaced, a utility with a significantmore » difference in individual meter reading costs could save three to five dollars per meter per year. This study showed that the {open_quotes}high-cost{close_quotes} meters were six times more expensive to read than the average meter. Additionally, AMR systems increase the information available to consumers and to the utility on usage patterns and problems. The challenge was to cost effectively identify the {open_quotes}high-cost{close_quotes} meters. The costs to collect these data were less than $500.« less

Consumer-Operated Service Programs: monetary and donated costs and cost-effectiveness.

PubMed

Yates, Brian T; Mannix, Danyelle; Freed, Michael C; Campbell, Jean; Johnsen, Matthew; Jones, Kristine; Blyler, Crystal R

2011-01-01

Examine cost differences between Consumer Operated Service Programs (COSPs) as possibly determined by a) size of program, b) use of volunteers and other donated resources, c) cost-of-living differences between program locales, d) COSP model applied, and e) delivery system used to implement the COSP model. As part of a larger evaluation of COSP, data on operating costs, enrollments, and mobilization of donated resources were collected for eight programs representing three COSP models (drop-in centers, mutual support, and education/advocacy training). Because the 8 programs were operated in geographically diverse areas of the US, costs were examined with and without adjustment for differences in local cost of living. Because some COSPs use volunteers and other donated resources, costs were measured with and without these resources being monetized. Scale of operation also was considered as a mediating variable for differences in program costs. Cost per visit, cost per consumer per quarter, and total program cost were calculated separately for funds spent and for resources donated for each COSP. Differences between COSPs in cost per consumer and cost per visit seem better explained by economies of scale and delivery system used than by cost-of-living differences between program locations or COSP model. Given others' findings that different COSP models produce little variation in service effectiveness, minimize service costs by maximizing scale of operation while using a delivery system that allows staff and facilities resources to be increased or decreased quickly to match number of consumers seeking services.

The Life Cycle Cost (LCC) of Life Support Recycling and Resupply

NASA Technical Reports Server (NTRS)

Jones, Harry W.

2015-01-01

Brief human space missions supply all the crew's water and oxygen from Earth. The multiyear International Space Station (ISS) program instead uses physicochemical life support systems to recycle water and oxygen. This paper compares the Life Cycle Cost (LCC) of recycling to the LCC of resupply for potential future long duration human space missions. Recycling systems have high initial development costs but relatively low durationdependent support costs. This means that recycling is more cost effective for longer missions. Resupplying all the water and oxygen requires little initial development cost but has a much higher launch mass and launch cost. The cost of resupply increases as the mission duration increases. Resupply is therefore more cost effective than recycling for shorter missions. A recycling system pays for itself when the resupply LCC grows greater over time than the recycling LCC. The time when this occurs is called the recycling breakeven date. Recycling will cost very much less than resupply for long duration missions within the Earth-Moon system, such as a future space station or Moon base. But recycling would cost about the same as resupply for long duration deep space missions, such as a Mars trip. Because it is not possible to provide emergency supplies or quick return options on the way to Mars, more expensive redundant recycling systems will be needed.

Middle East respiratory syndrome: obstacles and prospects for vaccine development

PubMed Central

Papaneri, Amy B.; Johnson, Reed F.; Wada, Jiro; Bollinger, Laura; Jahrling, Peter B.; Kuhn, Jens H.

2016-01-01

Summary The recent emergence of Middle East respiratory syndrome (MERS) highlights the need to engineer new methods for expediting vaccine development against emerging diseases. However, several obstacles prevent pursuit of a licensable MERS vaccine. First, the lack of a suitable animal model for MERS complicates in vivo testing of candidate vaccines. Second, due to the low number of MERS cases, pharmaceutical companies have little incentive to pursue MERS vaccine production as the costs of clinical trials are high. In addition, the timeline from bench research to approved vaccine use is 10 years or longer. Using novel methods and cost-saving strategies, genetically engineered vaccines can be produced quickly and cost-effectively. Along with progress in MERS animal model development, these obstacles can be circumvented or at least mitigated. PMID:25864502

Trade-offs between acquired and innate immune defenses in humans

PubMed Central

McDade, Thomas W.; Georgiev, Alexander V.; Kuzawa, Christopher W.

2016-01-01

Immune defenses provide resistance against infectious disease that is critical to survival. But immune defenses are costly, and limited resources allocated to immunity are not available for other physiological or developmental processes. We propose a framework for explaining variation in patterns of investment in two important subsystems of anti-pathogen defense: innate (non-specific) and acquired (specific) immunity. The developmental costs of acquired immunity are high, but the costs of maintenance and activation are relatively low. Innate immunity imposes lower upfront developmental costs, but higher operating costs. Innate defenses are mobilized quickly and are effective against novel pathogens. Acquired responses are less effective against novel exposures, but more effective against secondary exposures due to immunological memory. Based on their distinct profiles of costs and effectiveness, we propose that the balance of investment in innate versus acquired immunity is variable, and that this balance is optimized in response to local ecological conditions early in development. Nutritional abundance, high pathogen exposure and low signals of extrinsic mortality risk during sensitive periods of immune development should all favor relatively higher levels of investment in acquired immunity. Undernutrition, low pathogen exposure, and high mortality risk should favor innate immune defenses. The hypothesis provides a framework for organizing prior empirical research on the impact of developmental environments on innate and acquired immunity, and suggests promising directions for future research in human ecological immunology. PMID:26739325

The Charlie Sheen Effect on Rapid In-home Human Immunodeficiency Virus Test Sales.

PubMed

Allem, Jon-Patrick; Leas, Eric C; Caputi, Theodore L; Dredze, Mark; Althouse, Benjamin M; Noar, Seth M; Ayers, John W

2017-07-01

One in eight of the 1.2 million Americans living with human immunodeficiency virus (HIV) are unaware of their positive status, and untested individuals are responsible for most new infections. As a result, testing is the most cost-effective HIV prevention strategy and must be accelerated when opportunities are presented. Web searches for HIV spiked around actor Charlie Sheen's HIV-positive disclosure. However, it is unknown whether Sheen's disclosure impacted offline behaviors like HIV testing. The goal of this study was to determine if Sheen's HIV disclosure was a record-setting HIV prevention event and determine if Web searches presage increases in testing allowing for rapid detection and reaction in the future. Sales of OraQuick rapid in-home HIV test kits in the USA were monitored weekly from April 12, 2014, to April 16, 2016, alongside Web searches including the terms "test," "tests," or "testing" and "HIV" as accessed from Google Trends. Changes in OraQuick sales around Sheen's disclosure and prediction models using Web searches were assessed. OraQuick sales rose 95% (95% CI, 75-117; p < 0.001) of the week of Sheen's disclosure and remained elevated for 4 more weeks (p < 0.05). In total, there were 8225 more sales than expected around Sheen's disclosure, surpassing World AIDS Day by a factor of about 7. Moreover, Web searches mirrored OraQuick sales trends (r = 0.79), demonstrating their ability to presage increases in testing. The "Charlie Sheen effect" represents an important opportunity for a public health response, and in the future, Web searches can be used to detect and act on more opportunities to foster prevention behaviors.

Alternative Fuels Data Center: Reynolds Logistics Reduces Fuel Costs With

Science.gov Websites

EVsA> Reynolds Logistics Reduces Fuel Costs With EVs to someone by E-mail Share Alternative Fuels costs. For information about this project, contact Tucson Clean Cities. Download QuickTime Video Videos Photo of a car Electric Vehicles Charge up at State Parks in West Virginia Dec. 9, 2017 Photo of a

Midline submental intubation might be the preferred alternative to oral and nasal intubation in elective oral and craniomaxillofacial surgery when indicated.

PubMed

Jin, Huijun; Patil, Pavan Manohar

2015-01-01

No consensus exists to date regarding the best method of controlling the airway for oral or craniomaxillofacial surgery when orotracheal and nasotracheal intubations are unsuccessful or contraindicated. The most commonly used method of tracheostomy has been associated with a high degree of morbidity. Therefore, the present study was conducted to determine the indications, safety, efficacy, time required, drawbacks, complications, and costs of the midline submental intubation (SMI) approach in elective oral and craniomaxillofacial surgical procedures. A retrospective case series study was used to evaluate the surgical, financial, and photographic records of all patients who had undergone oral or craniomaxillofacial operations at Sharda University School of Dental Sciences, Greater Noida, from April 2006 to March 2014. The indications, drawbacks, time required for the procedure, ability to provide a secure airway, intra- and postoperative complications, and additional costs associated with SMI were analyzed. Of the 2,823 patients treated, the present study included 120 patients (97 men and 23 women, aged 19 to 60 years). The average time required for SMI was 10 ± 2 minutes. No episode of intraoperative oxygen desaturation was noted. One intraoperative complication, an injury to the ventral surface of the tongue, was encountered. Two patients developed infection at the skin incision site. No significant additional cost was incurred with the use of SMI. SMI has been successfully used in elective oral and craniomaxillofacial surgical procedures for which oral and nasal intubations were either not indicated or not possible. The advantages include a quick procedure, insignificant complications, the ability to provide a stable airway, and no added costs, making SMI a quick, safe, efficient, and cost-effective alternative in such cases. Copyright © 2015 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

[Evaluation on cost-effectiveness of snail control project by environmental modification in hilly regions].

PubMed

Li, Shui-Ming; Chen, Shi-Jun; Wu, Xiao-Jun; Chen, Xi-Qing; Zhang, Rong-Ping; Zhang, Jian-Rong

2011-02-01

To evaluate the cost-effectiveness of the snail control project by environmental modification in order to provide the evidence for quickly interrupting the transmission of schistosomiasis in hilly regions. Field investigations were carried out. The changes of the snail habitat areas were compared before and after the snail control project. The direct costs of the snail control were calculated. The reduction rates of snail area and snail density were regarded as the evaluation indexes of the effectiveness. The costs for reduction of 1% of snail area and 1% of snail density were used as the unit for cost-effectiveness analysis. After the 15 projects were implemented, there were no snails in 12 areas. The reduction rates of snail areas were 72.22% to 100%. The reduction rates of the snail area and density were both 100% in the areas with digging new ditches to fill up the old ones and building reservoirs. The total cost of 15 projects was 1 450 800 Yuan. The average cost per unit was 0.56 Yuan/m2. After the snail control project by digging new ditches to fill up the old ones was implemented, the costs of snail area and density decreased by one unit were 300 -700 Yuan, by building reservoirs, the costs were 600 -2 600 Yuan, by building fishpond, the costs were 1 200 - 1 500 Yuan, by watershed comprehensive measures, the costs were 900 - 2 700 Yuan. The cost of digging new ditches to fill up the old ones was significantly lower than that of building reservoirs or watershed comprehensive measures, but there was no significant difference between building reservoirs and watershed comprehensive measures. In hilly regions, the implementation of snail control project by environmental modification combined with construction of water conservancy is effective, and the cost-effectiveness of the snail control with digging new ditches to fill up the old ones is excellent.

Cost effectiveness of physiotherapy, manual therapy, and general practitioner care for neck pain: economic evaluation alongside a randomised controlled trial

PubMed Central

Bos, Ingeborg B C Korthals-de; Hoving, Jan L; van Tulder, Maurits W; Mölken, Maureen P M H Rutten-van; Adèr, Herman J; de Vet, Henrica C W; Koes, Bart W; Vondeling, Hindrik; Bouter, Lex M

2003-01-01

Objective To evaluate the cost effectiveness of physiotherapy, manual therapy, and care by a general practitioner for patients with neck pain. Design Economic evaluation alongside a randomised controlled trial. Setting Primary care. Participants 183 patients with neck pain for at least two weeks recruited by 42 general practitioners and randomly allocated to manual therapy (n=60, spinal mobilisation), physiotherapy (n=59, mainly exercise), or general practitioner care (n=64, counselling, education, and drugs). Main outcome measures Clinical outcomes were perceived recovery, intensity of pain, functional disability, and quality of life. Direct and indirect costs were measured by means of cost diaries that were kept by patients for one year. Differences in mean costs between groups, cost effectiveness, and cost utility ratios were evaluated by applying non-parametric bootstrapping techniques. Results The manual therapy group showed a faster improvement than the physiotherapy group and the general practitioner care group up to 26 weeks, but differences were negligible by follow up at 52 weeks. The total costs of manual therapy (€447; £273; $402) were around one third of the costs of physiotherapy (€1297) and general practitioner care (€1379). These differences were significant: P<0.01 for manual therapy versus physiotherapy and manual therapy versus general practitioner care and P=0.55 for general practitioner care versus physiotherapy. The cost effectiveness ratios and the cost utility ratios showed that manual therapy was less costly and more effective than physiotherapy or general practitioner care. Conclusions Manual therapy (spinal mobilisation) is more effective and less costly for treating neck pain than physiotherapy or care by a general practitioner. What is already known on this topicThe cost of treating neck pain is considerableMany conservative interventions are available, such as prescription drugs, yet their cost effectiveness has not been evaluatedNo randomised trials of conservative treatment for neck pain have so far included an economic evaluationWhat this study addsManual therapy is more effective and less costly than physiotherapy or care by a general practitioner for treating neck painPatients undergoing manual therapy recovered more quickly than those undergoing the other interventions PMID:12714472

Costs of immune responses are related to host body size and lifespan

DOE PAGES

Brace, Amber J.; Lajeunesse, Marc J.; Ardia, Daniel R.; ...

2017-06-01

A central assumption in ecological immunology is that immune responses are costly, with costs manifesting directly (e.g., increases in metabolic rate and increased amino acid usage) or as tradeoffs with other life processes (e.g., reduced growth and reproductive success). Across taxa, host longevity, timing of maturity, and reproductive effort affect the organization of immune systems. It is reasonable, therefore, to expect that these and related factors should also affect immune activation costs. Specifically, species that spread their breeding efforts over a long lifetime should experience lower immune costs than those that mature and breed quickly and die comparatively early. Likewise,more » body mass should affect immune costs, as body size affects the extent to which hosts are exposed to parasites as well as how hosts can combat infections (via its effects on metabolic rates and other factors). Here in this paper, we used phylogenetic meta-regression to reveal that, in general, animals incur costs of immune activation, but small species that are relatively long-lived incur the largest costs. These patterns probably arise because of the relative need for defense when infection risk is comparatively high and fitness can only be realized over a comparatively long period. However, given the diversity of species considered here and the overall modest effects of body mass and life history on immune costs, much more research is necessary before generalizations are appropriate.« less

Costs of immune responses are related to host body size and lifespan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brace, Amber J.; Lajeunesse, Marc J.; Ardia, Daniel R.

A central assumption in ecological immunology is that immune responses are costly, with costs manifesting directly (e.g., increases in metabolic rate and increased amino acid usage) or as tradeoffs with other life processes (e.g., reduced growth and reproductive success). Across taxa, host longevity, timing of maturity, and reproductive effort affect the organization of immune systems. It is reasonable, therefore, to expect that these and related factors should also affect immune activation costs. Specifically, species that spread their breeding efforts over a long lifetime should experience lower immune costs than those that mature and breed quickly and die comparatively early. Likewise,more » body mass should affect immune costs, as body size affects the extent to which hosts are exposed to parasites as well as how hosts can combat infections (via its effects on metabolic rates and other factors). Here in this paper, we used phylogenetic meta-regression to reveal that, in general, animals incur costs of immune activation, but small species that are relatively long-lived incur the largest costs. These patterns probably arise because of the relative need for defense when infection risk is comparatively high and fitness can only be realized over a comparatively long period. However, given the diversity of species considered here and the overall modest effects of body mass and life history on immune costs, much more research is necessary before generalizations are appropriate.« less

Performance-based, cost- and time-effective pcb analytical methodology.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alvarado, J. S.

1998-06-11

Laboratory applications for the analysis of PCBs (polychlorinated biphenyls) in environmental matrices such as soil/sediment/sludge and oil/waste oil were evaluated for potential reduction in waste, source reduction, and alternative techniques for final determination. As a consequence, new procedures were studied for solvent substitution, miniaturization of extraction and cleanups, minimization of reagent consumption, reduction of cost per analysis, and reduction of time. These new procedures provide adequate data that meet all the performance requirements for the determination of PCBs. Use of the new procedures reduced costs for all sample preparation techniques. Time and cost were also reduced by combining the newmore » sample preparation procedures with the power of fast gas chromatography. Separation of Aroclor 1254 was achieved in less than 6 min by using DB-1 and SPB-608 columns. With the greatly shortened run times, reproducibility can be tested quickly and consequently with low cost. With performance-based methodology, the applications presented here can be applied now, without waiting for regulatory approval.« less

A survey of COTS wireless transceiver solutions for unmanned/unattended homeland defense systems

NASA Astrophysics Data System (ADS)

Wurth, Timothy J.; Wells, Jeffrey S.; Trimble, Michael L.

2004-08-01

As the war on terrorism continues abroad, the need to maintain security at home remains a major concern. Every aspect of the security effort can benefit from rapid information transfer. Advances in Commercial-Off-the-Shelf (COTS) radios make them valuable in applications ranging from deployed sensors on unsecured borders, to organizing an emergency response team. Additionally, the reduced cost and availability of these transceivers make them a viable alternative to custom developments. As an example, COTS radios can serve as the communication element in Unattended Ground Sensor (UGS) and munitions systems. Other applications include networked sonobuoys and networked RFID tracking. An additional advantage of COTS solutions is that they are available in a small form factor. They have extremely small mechanical outlines and are easily installed in systems requiring miniature designs and light payloads such as man-pack emplaced radios for the Army"s Future Combat System (FCS), as well as missions carried out by Unmanned Aerial Vehicles (UAV). The availability of the COTS radios result in a low-cost alternative for communication links that are applicable to military and Homeland Defense projects. They provide an easily obtainable, low-cost radio alternative enabling quick design cycles to meet mission timeliness. COTS solutions eliminate months from a typical design cycle and have many features already implemented such as ad-hoc routing and encryption. This enables robust hardware to be fielded quickly when a new need arises. The focus of this paper is to identify different COTS modules that can efficiently and cost effectively be applied to these and other various applications.

Cheap Oil and the Impact on Rebuilding Syria

DTIC Science & Technology

2015-10-30

Syrian energy infrastructure will not be cost effective in the current oil pricing environment. I will present a quick overview of oil’s historic role...in the Syrian economy, followed by a synopsis of the current state of Syria’s oil infrastructure . An analysis of the impact of low oil prices on...similarities between countries, a specific comparison will be made to Yemen in an effort to predict the challenges that Syria will face when entering the

LOW COST IMAGER FOR POLLUTANT GAS LEAK DETECTION - PHASE II

EPA Science Inventory

An inexpensive imaging Instrument to quickly locate leaks of methane and other greenhouse and VOC gases would reduce the cost and effort expended by industry to comply with EPA regulations. In Phase I, of this WBIR program, a new gas leak visualization camera was demonstrated...

Metal surface corrosion grade estimation from single image

NASA Astrophysics Data System (ADS)

Chen, Yijun; Qi, Lin; Sun, Huyuan; Fan, Hao; Dong, Junyu

2018-04-01

Metal corrosion can cause many problems, how to quickly and effectively assess the grade of metal corrosion and timely remediation is a very important issue. Typically, this is done by trained surveyors at great cost. Assisting them in the inspection process by computer vision and artificial intelligence would decrease the inspection cost. In this paper, we propose a dataset of metal surface correction used for computer vision detection and present a comparison between standard computer vision techniques by using OpenCV and deep learning method for automatic metal surface corrosion grade estimation from single image on this dataset. The test has been performed by classifying images and calculating the accuracy for the two different approaches.

Booze, Bars, and Bystander Behavior: People Who Consumed Alcohol Help Faster in the Presence of Others

PubMed Central

van Bommel, Marco; van Prooijen, Jan-Willem; Elffers, Henk; Van Lange, Paul A. M.

2016-01-01

People help each other less often and less quickly when bystanders are present. In this paper, we propose that alcohol consumption could attenuate or reverse this so-called bystander effect. Alcohol impairs people cognitively and perceptually, leading them to think less about the presence of others and behave less inhibited. Moreover, alcohol makes people more prone to see the benefits of helping and not the costs. To provide an initial test of these lines of reasoning, we invited visitors of bars in Amsterdam to join our study at a secluded spot at the bar. We manipulated bystander presence, and at the end of the study, we measured alcohol consumption. When participants took their seats, the experimenter dropped some items. We measured how many items were picked up and how quickly participants engaged in helping. Results revealed that alcohol did not influence the bystander effect in terms of the amount of help given. But importantly, it did influence the bystander effect in terms of response times: people who consumed alcohol actually came to aid faster in the presence of others. PMID:26903929

A Mobile Health Application to Predict Postpartum Depression Based on Machine Learning.

PubMed

Jiménez-Serrano, Santiago; Tortajada, Salvador; García-Gómez, Juan Miguel

2015-07-01

Postpartum depression (PPD) is a disorder that often goes undiagnosed. The development of a screening program requires considerable and careful effort, where evidence-based decisions have to be taken in order to obtain an effective test with a high level of sensitivity and an acceptable specificity that is quick to perform, easy to interpret, culturally sensitive, and cost-effective. The purpose of this article is twofold: first, to develop classification models for detecting the risk of PPD during the first week after childbirth, thus enabling early intervention; and second, to develop a mobile health (m-health) application (app) for the Android(®) (Google, Mountain View, CA) platform based on the model with best performance for both mothers who have just given birth and clinicians who want to monitor their patient's test. A set of predictive models for estimating the risk of PPD was trained using machine learning techniques and data about postpartum women collected from seven Spanish hospitals. An internal evaluation was carried out using a hold-out strategy. An easy flowchart and architecture for designing the graphical user interface of the m-health app was followed. Naive Bayes showed the best balance between sensitivity and specificity as a predictive model for PPD during the first week after delivery. It was integrated into the clinical decision support system for Android mobile apps. This approach can enable the early prediction and detection of PPD because it fulfills the conditions of an effective screening test with a high level of sensitivity and specificity that is quick to perform, easy to interpret, culturally sensitive, and cost-effective.

The impact of HMO and hospital competition on hospital costs.

PubMed

Younis, Mustafa Z; Rivers, Patrick A; Fottler, Myron D

2005-01-01

This study examines the impact of HMO penetration and competition on health system performance, as measured by hospital cost per adjusted admissions. The study population consisted of acute-care hospitals in the United States. The findings of this study suggest that there is no relationship between HMO competition and hospital cost per adjusted admission. Governmental efforts to stimulate competition in the hospital market, if focused on promoting HMOs, are not likely to produce cost-containing results quickly.

Digestion-ligation-only Hi-C is an efficient and cost-effective method for chromosome conformation capture.

PubMed

Lin, Da; Hong, Ping; Zhang, Siheng; Xu, Weize; Jamal, Muhammad; Yan, Keji; Lei, Yingying; Li, Liang; Ruan, Yijun; Fu, Zhen F; Li, Guoliang; Cao, Gang

2018-05-01

Chromosome conformation capture (3C) technologies can be used to investigate 3D genomic structures. However, high background noise, high costs, and a lack of straightforward noise evaluation in current methods impede the advancement of 3D genomic research. Here we developed a simple digestion-ligation-only Hi-C (DLO Hi-C) technology to explore the 3D landscape of the genome. This method requires only two rounds of digestion and ligation, without the need for biotin labeling and pulldown. Non-ligated DNA was efficiently removed in a cost-effective step by purifying specific linker-ligated DNA fragments. Notably, random ligation could be quickly evaluated in an early quality-control step before sequencing. Moreover, an in situ version of DLO Hi-C using a four-cutter restriction enzyme has been developed. We applied DLO Hi-C to delineate the genomic architecture of THP-1 and K562 cells and uncovered chromosomal translocations. This technology may facilitate investigation of genomic organization, gene regulation, and (meta)genome assembly.

Evaluating the performance of the quick CSF method in detecting contrast sensitivity function changes

PubMed Central

Hou, Fang; Lesmes, Luis Andres; Kim, Woojae; Gu, Hairong; Pitt, Mark A.; Myung, Jay I.; Lu, Zhong-Lin

2016-01-01

The contrast sensitivity function (CSF) has shown promise as a functional vision endpoint for monitoring the changes in functional vision that accompany eye disease or its treatment. However, detecting CSF changes with precision and efficiency at both the individual and group levels is very challenging. By exploiting the Bayesian foundation of the quick CSF method (Lesmes, Lu, Baek, & Albright, 2010), we developed and evaluated metrics for detecting CSF changes at both the individual and group levels. A 10-letter identification task was used to assess the systematic changes in the CSF measured in three luminance conditions in 112 naïve normal observers. The data from the large sample allowed us to estimate the test–retest reliability of the quick CSF procedure and evaluate its performance in detecting CSF changes at both the individual and group levels. The test–retest reliability reached 0.974 with 50 trials. In 50 trials, the quick CSF method can detect a medium 0.30 log unit area under log CSF change with 94.0% accuracy at the individual observer level. At the group level, a power analysis based on the empirical distribution of CSF changes from the large sample showed that a very small area under log CSF change (0.025 log unit) could be detected by the quick CSF method with 112 observers and 50 trials. These results make it plausible to apply the method to monitor the progression of visual diseases or treatment effects on individual patients and greatly reduce the time, sample size, and costs in clinical trials at the group level. PMID:27120074

[Relating costs to activities in hospitals. Use of internal cost accounting].

PubMed

Stavem, K

1995-01-10

During the last few years hospital cost accounting has become widespread in many countries, in parallel with increasing cost pressure, greater competition and new financing schemes. Cost accounting has been used in the manufacturing industry for many years. Costs can be related to activities and production, e.g. by the costing of procedures, episodes of care and other internally defined cost objectives. Norwegian hospitals have lagged behind in the adoption of cost accounting. They ought to act quickly if they want to be prepared for possible changes in health care financing. The benefits can be considerable to a hospital operating in a rapidly changing health care environment.

"Show me the money": a fair criticism of economic studies on inhaled bronchodilators for COPD.

PubMed

Kostikas, Konstantinos; Bouros, Demosthenes

2010-09-15

Chronic obstructive pulmonary disease (COPD) represents a significant burden for healthcare systems that is expected to grow further in the future. Inhaled long-acting bronchodilators, including tiotropium, represent the cornerstone of management of COPD patients. Economic studies evaluating the cost-effectiveness ratio of inhaled bronchodilators have to take into account several parameters, including the reduction of COPD exacerbations and related hospitalizations, as well as disease modification and improvement in quality of life and mortality. At an era when the healthcare resources are unlikely to grow as quickly as demand, economic analyses remain the cornerstone for the justification of the broad use of medication with an acceptable cost-effectiveness ratio. The greatest importance of such studies in COPD is the identification of subgroups of patients that will have the most benefit with an acceptable cost-effectiveness ratio for the healthcare providers. The development of models that will incorporate a global evaluation of the different aspects of this multi-component disease, in order to provide the best available care to each individual patient is urgently needed.

Economical Analysis on Prophylaxis, Diagnosis, and Treatment of Periprosthetic Infections

PubMed Central

Fernandez-Fairen, Mariano; Torres, Ana; Menzie, Ann; Hernandez-Vaquero, Daniel; Fernandez-Carreira, José Manuel; Murcia-Mazon, Antonio; Guerado, Enrique; Merzthal, Luis

2013-01-01

The economic burden of periprosthetic infections is enormous, but the number of economic studies dealing with this issue is very scarce. This review tries to know the economic literature existing, assess the value of current data, and recognize the less costly and more effective procedures for prevention, diagnosis and treatment of periprosthetic infections. Forty five studies meeting the inclusion criteria and adhering to the quality criteria used were carefully analyzed to extract the economic data of relevance in evaluating the magnitude of problem and the more cost-effective solutions. However, because the heterogeneity and the low-quality of most of these studies meta-analytical technique has not been possible. Instead, the studies have been reviewed descriptively. Optimizing the antibiotic use in the prevention and treatment of periprosthetic infection, combined with systemic and behavioral changes in the operating room; detecting and treating the high-risk groups; a quick, simple, reliable, safe, and cost-effective diagnosis, and the rationale management of the instituted infection, specifically using the different procedures according to each particular case, could allow to improve outcomes and produce the highest quality of life for patients and the lowest economic impact. Nevertheless, the cost effectiveness of different interventions to prevent and to treat the periprosthetic infection remains unclear. PMID:24082966

Optimize Resources and Help Reduce Cost of Ownership with Dell[TM] Systems Management

ERIC Educational Resources Information Center

Technology & Learning, 2008

2008-01-01

Maintaining secure, convenient administration of the PC system environment can be a significant drain on resources. Deskside visits can greatly increase the cost of supporting a large number of computers. Even simple tasks, such as tracking inventory or updating software, quickly become expensive when they require physically visiting every…

Why Cool Roofs?

ScienceCinema

Chu, Steven

2017-12-27

By installing a cool roof at DOE, the federal government and Secretary Chu are helping to educate families and businesses about the important energy and cost savings that can come with this simple, low-cost technology. Cool roofs have the potential to quickly and dramatically reduce global carbon emissions while saving money every month on consumers' electrical bills.

Policy Driven Development: Flexible Policy Insertion for Large Scale Systems.

PubMed

Demchak, Barry; Krüger, Ingolf

2012-07-01

The success of a software system depends critically on how well it reflects and adapts to stakeholder requirements. Traditional development methods often frustrate stakeholders by creating long latencies between requirement articulation and system deployment, especially in large scale systems. One source of latency is the maintenance of policy decisions encoded directly into system workflows at development time, including those involving access control and feature set selection. We created the Policy Driven Development (PDD) methodology to address these development latencies by enabling the flexible injection of decision points into existing workflows at runtime , thus enabling policy composition that integrates requirements furnished by multiple, oblivious stakeholder groups. Using PDD, we designed and implemented a production cyberinfrastructure that demonstrates policy and workflow injection that quickly implements stakeholder requirements, including features not contemplated in the original system design. PDD provides a path to quickly and cost effectively evolve such applications over a long lifetime.

Flightfax - Army Aviation Risk-Management Information. Volume 25, Number 11, August 1997. Snow

DTIC Science & Technology

1997-08-01

but why haven’t Loach that would ensure our surviving a multiple- you been acknowledging the radio calls?" A quick wire strike. check confirmed that...helicopter upright with only the collective and Loach on post with skid shoes, the skid cleats would pedals. have snagged the middle wire and flipped...is more cost effective to overhaul until because masking violated FAA Mr. Ken Muzzo, DSN 490-2257 (314-260- the retirement life is reached. The

X-1 to X-Wings: Developing a Parametric Cost Model

NASA Technical Reports Server (NTRS)

Sterk, Steve; McAtee, Aaron

2015-01-01

In todays cost-constrained environment, NASA needs an X-Plane database and parametric cost model that can quickly provide rough order of magnitude predictions of cost from initial concept to first fight of potential X-Plane aircraft. This paper takes a look at the steps taken in developing such a model and reports the results. The challenges encountered in the collection of historical data and recommendations for future database management are discussed. A step-by-step discussion of the development of Cost Estimating Relationships (CERs) is then covered.

Comparative effectiveness research and big data: balancing potential with legal and ethical considerations.

PubMed

Gray, Elizabeth Alexandra; Thorpe, Jane Hyatt

2015-01-01

Big data holds big potential for comparative effectiveness research. The ability to quickly synthesize and use vast amounts of health data to compare medical interventions across settings of care, patient populations, payers and time will greatly inform efforts to improve quality, reduce costs and deliver more patient-centered care. However, the use of big data raises significant legal and ethical issues that may present barriers or limitations to the full potential of big data. This paper addresses the scope of some of these legal and ethical issues and how they may be managed effectively to fully realize the potential of big data.

Hives (Urticaria)

MedlinePlus

... Asthma Quick-Relief Medicine Use Asthma Long-Term Control Medicine Use Cost of Asthma on Society Burden of Asthma on Minorities Asthma Inhaler Design My Life With Asthma Report Why Patient Engagement ...

Allergy Capitals

MedlinePlus

... Asthma Quick-Relief Medicine Use Asthma Long-Term Control Medicine Use Cost of Asthma on Society Burden of Asthma on Minorities Asthma Inhaler Design My Life With Asthma Report Why Patient Engagement ...

Generalized Intelligent Framework for Tutoring (GIFT) Cloud/Virtual Open Campus Quick-Start Guide

DTIC Science & Technology

2016-03-01

distribution is unlimited. 13. SUPPLEMENTARY NOTES 14. ABSTRACT This document serves as the quick-start guide for GIFT Cloud, the web -based...to users with a GIFT Account at no cost. GIFT Cloud is a new implementation of GIFT. This web -based application allows learners, authors, and...distribution is unlimited. 3 3. Requirements for GIFT Cloud GIFT Cloud is accessed via a web browser. Officially, GIFT Cloud has been tested to work on

Effect of telephone health coaching (Birmingham OwnHealth) on hospital use and associated costs: cohort study with matched controls.

PubMed

Steventon, Adam; Tunkel, Sarah; Blunt, Ian; Bardsley, Martin

2013-08-06

To test the effect of a telephone health coaching service (Birmingham OwnHealth) on hospital use and associated costs. Analysis of person level administrative data. Difference-in-difference analysis was done relative to matched controls. Community based intervention operating in a large English city with industry. 2698 patients recruited from local general practices before 2009 with heart failure, coronary heart disease, diabetes, or chronic obstructive pulmonary disease; and a history of inpatient or outpatient hospital use. These individuals were matched on a 1:1 basis to control patients from similar areas of England with respect to demographics, diagnoses of health conditions, previous hospital use, and a predictive risk score. Telephone health coaching involved a personalised care plan and a series of outbound calls usually scheduled monthly. Median length of time enrolled on the service was 25.5 months. Control participants received usual healthcare in their areas, which did not include telephone health coaching. Number of emergency hospital admissions per head over 12 months after enrolment. Secondary metrics calculated over 12 months were: hospital bed days, elective hospital admissions, outpatient attendances, and secondary care costs. In relation to diagnoses of health conditions and other baseline variables, matched controls and intervention patients were similar before the date of enrolment. After this point, emergency admissions increased more quickly among intervention participants than matched controls (difference 0.05 admissions per head, 95% confidence interval 0.00 to 0.09, P=0.046). Outpatient attendances also increased more quickly in the intervention group (difference 0.37 attendances per head, 0.16 to 0.58, P<0.001), as did secondary care costs (difference £175 per head, £22 to £328, P=0.025). Checks showed that we were unlikely to have missed reductions in emergency admissions because of unobserved differences between intervention and matched control groups. The Birmingham OwnHealth telephone health coaching intervention did not lead to the expected reductions in hospital admissions or secondary care costs over 12 months, and could have led to increases.

A model-assisted radio occultation data inversion method based on data ingestion into NeQuick

NASA Astrophysics Data System (ADS)

Shaikh, M. M.; Nava, B.; Kashcheyev, A.

2017-01-01

Inverse Abel transform is the most common method to invert radio occultation (RO) data in the ionosphere and it is based on the assumption of the spherical symmetry for the electron density distribution in the vicinity of an occultation event. It is understood that this 'spherical symmetry hypothesis' could fail, above all, in the presence of strong horizontal electron density gradients. As a consequence, in some cases wrong electron density profiles could be obtained. In this work, in order to incorporate the knowledge of horizontal gradients, we have suggested an inversion technique based on the adaption of the empirical ionospheric model, NeQuick2, to RO-derived TEC. The method relies on the minimization of a cost function involving experimental and model-derived TEC data to determine NeQuick2 input parameters (effective local ionization parameters) at specific locations and times. These parameters are then used to obtain the electron density profile along the tangent point (TP) positions associated with the relevant RO event using NeQuick2. The main focus of our research has been laid on the mitigation of spherical symmetry effects from RO data inversion without using external data such as data from global ionospheric maps (GIM). By using RO data from Constellation Observing System for Meteorology Ionosphere and Climate (FORMOSAT-3/COSMIC) mission and manually scaled peak density data from a network of ionosondes along Asian and American longitudinal sectors, we have obtained a global improvement of 5% with 7% in Asian longitudinal sector (considering the data used in this work), in the retrieval of peak electron density (NmF2) with model-assisted inversion as compared to the Abel inversion. Mean errors of NmF2 in Asian longitudinal sector are calculated to be much higher compared to American sector.

Will the Measurement Robots Take Our Jobs? An Update on the State of Automated M&V for Energy Efficiency Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Granderson, Jessica; Touzani, Samir; Taylor, Cody

Trustworthy savings calculations are critical to convincing regulators of both the cost-effectiveness of energy efficiency program investments and their ability to defer supply-side capital investments. Today’s methods for measurement and verification (M&V) of energy savings constitute a significant portion of the total costs of energy efficiency programs. They also require time-consuming data acquisition. A spectrum of savings calculation approaches is used, with some relying more heavily on measured data and others relying more heavily on estimated, modeled, or stipulated data. The rising availability of “smart” meters and devices that report near-real time data, combined with new analytical approaches to quantifyingmore » savings, offers potential to conduct M&V more quickly and at lower cost, with comparable or improved accuracy. Commercial energy management and information systems (EMIS) technologies are beginning to offer M&V capabilities, and program administrators want to understand how they might assist programs in quickly and accurately measuring energy savings. This paper presents the results of recent testing of the ability to use automation to streamline some parts of M&V. Here in this paper, we detail metrics to assess the performance of these new M&V approaches, and a framework to compute the metrics. We also discuss the accuracy, cost, and time trade-offs between more traditional M&V, and these emerging streamlined methods that use high-resolution energy data and automated computational intelligence. Finally we discuss the potential evolution of M&V and early results of pilots currently underway to incorporate M&V automation into ratepayer-funded programs and professional implementation and evaluation practice.« less

Has payment by results affected the way that English hospitals provide care? Difference-in-differences analysis

PubMed Central

Yi, Deokhee; Sutton, Matt; Chalkley, Martin; Sussex, Jon; Scott, Anthony

2009-01-01

Objective To examine whether the introduction of payment by results (a fixed tariff case mix based payment system) was associated with changes in key outcome variables measuring volume, cost, and quality of care between 2003/4 and 2005/6. Setting Acute care hospitals in England. Design Difference-in-differences analysis (using a control group created from trusts in England and providers in Scotland not implementing payment by results in the relevant years); retrospective analysis of patient level secondary data with fixed effects models. Data sources English hospital episode statistics and Scottish morbidity records for 2002/3 to 2005/6. Main outcome measures Changes in length of stay and proportion of day case admissions as a proxy for unit cost; growth in number of spells to measure increases in output; and changes in in-hospital mortality, 30 day post-surgical mortality, and emergency readmission after treatment for hip fracture as measures of impact on quality of care. Results Length of stay fell more quickly and the proportion of day cases increased more quickly where payment by results was implemented, suggesting a reduction in the unit costs of care associated with payment by results. Some evidence of an association between the introduction of payment by results and growth in acute hospital activity was found. Little measurable change occurred in the quality of care indicators used in this study that can be attributed to the introduction of payment by results. Conclusion Reductions in unit costs may have been achieved without detrimental impact on the quality of care, at least in as far as these are measured by the proxy variables used in this study. PMID:19713233

Rapid, simple and inexpensive production of custom 3D printed equipment for large-volume fluorescence microscopy

PubMed Central

Tyson, Adam L.; Hilton, Stephen T.; Andreae, Laura C.

2015-01-01

The cost of 3D printing has reduced dramatically over the last few years and is now within reach of many scientific laboratories. This work presents an example of how 3D printing can be applied to the development of custom laboratory equipment that is specifically adapted for use with the novel brain tissue clearing technique, CLARITY. A simple, freely available online software tool was used, along with consumer-grade equipment, to produce a brain slicing chamber and a combined antibody staining and imaging chamber. Using standard 3D printers we were able to produce research-grade parts in an iterative manner at a fraction of the cost of commercial equipment. 3D printing provides a reproducible, flexible, simple and cost-effective method for researchers to produce the equipment needed to quickly adopt new methods. PMID:25797056

Infrared Technology Trends and Implications to Home and Building Energy Use Efficiency

NASA Astrophysics Data System (ADS)

Woolaway, James T.

2008-09-01

It has long been realized that infrared technology would have applicability in improving the energy efficiency of homes and buildings. Walls that are missing or are poorly insulated can be quickly evaluated by looking at the thermal images of these surfaces. Similarly, air infiltration leaks under doors and around windows leave a telltale thermal signature easily seen in the infrared. The ability to view, evaluate and quickly respond to these images has immediate benefits in addressing and correcting situations where these types of losses are occurring. The principle issue that has been limiting the use of infrared technology in these applications has been the lack of availability and accessibility of infrared technology at a cost point suited to this market. The emergence of low cost microbolometer based infrared cameras, not needing sensor cooling, will greatly increase the accessibility and use of infrared technology for House Doctor inspections. The technology cost for this use is projected to be less than 1 per inspection.

Comparing Green and Grey Infrastructure Using Life Cycle Cost and Environmental Impact: A Rain Garden Case Study in Cincinnati, OH.

EPA Science Inventory

Green infrastructure is quickly gaining ground as a less costly, greener alternative to traditional methods of stormwater management. One popular form of green infrastructure is the use of rain gardens to capture and infiltrate stormwater in to the ground. We used life cycle asse...

How IECs Fit into the Counseling Puzzle

ERIC Educational Resources Information Center

Brown, Andy

2017-01-01

Independent educational consultants (IECs) are rapidly becoming a regular part of the college search and admission process as students search for the right fit. Although the cost of going to college has risen sharply in recent years, the cost of hiring a consultant hasn't gone up nearly so quickly. Families are beginning to see consulting as…

Cotton yield estimation using very high-resolution digital images acquired on a low-cost small unmanned aerial vehicle

USDA-ARS?s Scientific Manuscript database

Yield estimation is a critical task in crop management. A number of traditional methods are available for crop yield estimation but they are costly, time-consuming and difficult to expand to a relatively large field. Remote sensing provides techniques to develop quick coverage over a field at any sc...

Airing Your Dirty Laundry: A Quick Marketable Pollution Permits Game for the Classroom

ERIC Educational Resources Information Center

Caviglia-Harris, Jill L.; Melstrom, Richard T.

2015-01-01

In this article, the authors describe a simple classroom game that demonstrates the advantage of tradable emissions permits in regulating environmental pollution. Students take on the role of polluters who must consider the costs of complying with a uniform reduction and a tradable permits program. The class is divided into high-cost polluters and…

An overview of DARPA's advanced space technology program

NASA Astrophysics Data System (ADS)

Nicastri, E.; Dodd, J.

1993-02-01

The Defense Advanced Research Projects Agency (DARPA) is the central research and development organization of the DoD and, as such, has the primary responsibility for the maintenance of U.S. technological superiority over potential adversaries. DARPA's programs focus on technology development and proof-of-concept demonstrations of both evolutionary and revolutionary approaches for improved strategic, conventional, rapid deployment and sea power forces, and on the scientific investigation into advanced basic technologies of the future. DARPA can move quickly to exploit new ideas and concepts by working directly with industry and universities. For four years, DARPA's Advanced Space Technology Program (ASTP) has addressed various ways to improve the performance of small satellites and launch vehicles. The advanced technologies that are being and will be developed by DARPA for small satellites can be used just as easily on large satellites. The primary objective of the ASTP is to enhance support to operational commanders by developing and applying advanced technologies that will provide cost-effective, timely, flexible, and responsive space systems. Fundamental to the ASTP effort is finding new ways to do business with the goal of quickly inserting new technologies into DoD space systems while reducing cost. In our view, these methods are prime examples of what may be termed 'technology leveraging.' The ASTP has initiated over 50 technology projects, many of which were completed and transitioned to users. The objectives are to quickly qualify these higher risk technologies for use on future programs and reduce the risk of inserting these technologies into major systems, and to provide the miniaturized systems that would enable smaller satellites to have significant - rather than limited - capability. Only a few of the advanced technologies are described, the majority of which are applicable to both large and small satellites.

Automated production of plant-based vaccines and pharmaceuticals.

PubMed

Wirz, Holger; Sauer-Budge, Alexis F; Briggs, John; Sharpe, Aaron; Shu, Sudong; Sharon, Andre

2012-12-01

A fully automated "factory" was developed that uses tobacco plants to produce large quantities of vaccines and other therapeutic biologics within weeks. This first-of-a-kind factory takes advantage of a plant viral vector technology to produce specific proteins within the leaves of rapidly growing plant biomass. The factory's custom-designed robotic machines plant seeds, nurture the growing plants, introduce a viral vector that directs the plant to produce a target protein, and harvest the biomass once the target protein has accumulated in the plants-all in compliance with Food and Drug Administration (FDA) guidelines (e.g., current Good Manufacturing Practices). The factory was designed to be time, cost, and space efficient. The plants are grown in custom multiplant trays. Robots ride up and down a track, servicing the plants and delivering the trays from the lighted, irrigated growth modules to each processing station as needed. Using preprogrammed robots and processing equipment eliminates the need for human contact, preventing potential contamination of the process and economizing the operation. To quickly produce large quantities of protein-based medicines, we transformed a laboratory-based biological process and scaled it into an industrial process. This enables quick, safe, and cost-effective vaccine production that would be required in case of a pandemic.

Comparison of water-quality samples collected by siphon samplers and automatic samplers in Wisconsin

USGS Publications Warehouse

Graczyk, David J.; Robertson, Dale M.; Rose, William J.; Steur, Jeffrey J.

2000-01-01

In small streams, flow and water-quality concentrations often change quickly in response to meteorological events. Hydrologists, field technicians, or locally hired stream ob- servers involved in water-data collection are often unable to reach streams quickly enough to observe or measure these rapid changes. Therefore, in hydrologic studies designed to describe changes in water quality, a combination of manual and automated sampling methods have commonly been used manual methods when flow is relatively stable and automated methods when flow is rapidly changing. Auto- mated sampling, which makes use of equipment programmed to collect samples in response to changes in stage and flow of a stream, has been shown to be an effective method of sampling to describe the rapid changes in water quality (Graczyk and others, 1993). Because of the high cost of automated sampling, however, especially for studies examining a large number of sites, alternative methods have been considered for collecting samples during rapidly changing stream conditions. One such method employs the siphon sampler (fig. 1). also referred to as the "single-stage sampler." Siphon samplers are inexpensive to build (about $25- $50 per sampler), operate, and maintain, so they are cost effective to use at a large number of sites. Their ability to collect samples representing the average quality of water passing though the entire cross section of a stream, however, has not been fully demonstrated for many types of stream sites.

Targeted post-mortem computed tomography cardiac angiography: proof of concept.

PubMed

Saunders, Sarah L; Morgan, Bruno; Raj, Vimal; Robinson, Claire E; Rutty, Guy N

2011-07-01

With the increasing use and availability of multi-detector computed tomography and magnetic resonance imaging in autopsy practice, there has been an international push towards the development of the so-called near virtual autopsy. However, currently, a significant obstacle to the consideration as to whether or not near virtual autopsies could one day replace the conventional invasive autopsy is the failure of post-mortem imaging to yield detailed information concerning the coronary arteries. To date, a cost-effective, practical solution to allow high throughput imaging has not been presented within the forensic literature. We present a proof of concept paper describing a simple, quick, cost-effective, manual, targeted in situ post-mortem cardiac angiography method using a minimally invasive approach, to be used with multi-detector computed tomography for high throughput cadaveric imaging which can be used in permanent or temporary mortuaries.

Anesthesia for ambulatory anorectal surgery.

PubMed

Gudaityte, Jūrate; Marchertiene, Irena; Pavalkis, Dainius

2004-01-01

The prevalence of minor anorectal diseases is 4-5% of adult Western population. Operations are performed on ambulatory or 24-hour stay basis. Requirements for ambulatory anesthesia are: rapid onset and recovery, ability to provide quick adjustments during maintenance, lack of intraoperative and postoperative side effects, and cost-effectiveness. Anorectal surgery requires deep levels of anesthesia. The aim is achieved with 1) regional blocks alone or in combination with monitored anesthesia care or 2) deep general anesthesia, usually with muscle relaxants and tracheal intubation. Modern general anesthetics provide smooth, quickly adjustable anesthesia and are a good choice for ambulatory surgery. Popular regional methods are: spinal anesthesia, caudal blockade, posterior perineal blockade and local anesthesia. The trend in regional anesthesia is lowering the dose of local anesthetic, providing selective segmental block. Adjuvants potentiating analgesia are recommended. Postoperative period may be complicated by: 1) severe pain, 2) urinary retention due to common nerve supply, and 3) surgical bleeding. Complications may lead to hospital admission. In conclusion, novel general anesthetics are recommended for ambulatory anorectal surgery. Further studies to determine an optimal dose and method are needed in the group of regional anesthesia.

Economic effects of propulsion system technology on existing and future transport aircraft

NASA Technical Reports Server (NTRS)

Sallee, G. P.

1974-01-01

The results of an airline study of the economic effects of propulsion system technology on current and future transport aircraft are presented. This report represents the results of a detailed study of propulsion system operating economics. The study has four major parts: (1) a detailed analysis of current propulsion system maintenance with respect to the material and labor costs encountered versus years in service and the design characteristics of the major elements of the propulsion system of the B707, b727, and B747. (2) an analysis of the economic impact of a future representative 1979 propulsion system is presented with emphasis on depreciation of investment, fuel costs and maintenance costs developed on the basis of the analysis of the historical trends observed. (3) recommendations concerning improved methods of forecasting the maintenance cost of future propulsion systems are presented. A detailed method based on the summation of the projected labor and material repair costs for each major engine module and its installation along with a shorter form suitable for quick, less detailed analysis are presented, and (4) recommendations concerning areas where additional technology is needed to improve the economics of future commercial propulsion systems are presented along with the suggested economic benefits available from such advanced technology efforts.

How to use a nebulizer

MedlinePlus

... different kind, called an ultrasonic nebulizer, uses sound vibrations. This kind of nebulizer is quieter, but costs ... Chronic obstructive pulmonary disease Wheezing Patient Instructions Asthma - control drugs Asthma - quick-relief drugs Bronchiolitis - discharge COPD - ...

Hybrid Airships: Intratheater Operations Cost-Benefit Analysis

DTIC Science & Technology

2011-06-01

airships (HA) in an intratheater humanitarian assistance scenario. A linear programming model was used to study various mixes of hybrid airships...i.e. 200 tons) must be moved as quickly as possible (or during sealift transit), then HA operating costs of $3,000 per hour or less also make them a ...for Future Research ................................................................................ 52 Appendix A : Examples of HA Concepts/Prototypes

Quick Facts about Financial Aid and Community Colleges, 2007-08

ERIC Educational Resources Information Center

Institute for College Access & Success, 2009

2009-01-01

Community colleges are usually considered a low-cost college option, but the sticker price is only part of the real story--students often struggle to cover a range of related costs and living expenses. Financial aid can be a big help, but many community college students have a harder time paying for college than their peers at four-year schools.…

The Weak Link HP-41C hand-held calculator program

Treesearch

Ross A. Phillips; Penn A. Peters; Gary D. Falk

1982-01-01

The Weak Link hand-held calculator program (HP-41C) quickly analyzes a system for logging production and costs. The production equations model conventional chain saw, skidder, loader, and tandemaxle truck operations in eastern mountain areas. Production of each function of the logging system may be determined so that the system may be balanced for minimum cost. The...

Parametric Study of Reactive Melt Infiltration

NASA Technical Reports Server (NTRS)

Nelson, Emily S.; Colella, Phillip

2000-01-01

Reactive melt infiltration is viewed as a promising means of achieving near-net shape manufacturing with quick processing time and at low cost. Since the reactants and products are, in general, of varying density, overall conservation of mass dictates that there is a force related to chemical conversion which can directly influence infiltration behavior. In effect, the driving pressure forces may compete with the forces from chemical conversion, affecting the advancement of the front. We have developed a two-dimensional numerical code to examine these effects, using reaction-formed silicon carbide as a model system for this process. We have examined a range of initial porosities, pore radii, and reaction rates in order to investigate their effects on infiltration dynamics.

Designing a critical care nurse-led rapid response team using only available resources: 6 years later.

PubMed

Mitchell, Anne; Schatz, Marilyn; Francis, Heather

2014-06-01

Rapid response teams have been introduced to intervene in the care of patients whose condition deteriorates unexpectedly by bringing clinical experts quickly to the patient's bedside. Evidence supporting the need to overcome failure to deliver optimal care in hospitals is robust; whether rapid response teams demonstrate benefit by improving patient safety and reducing the occurrence of adverse events remains controversial. Despite inconsistent evidence regarding the effectiveness of rapid response teams, concerns regarding care and costly consequences of unaddressed deterioration in patients' condition have prompted many hospitals to implement rapid response teams as a patient safety strategy. A cost-neutral structure for a rapid response team led by a nurse from the intensive care unit was implemented with the goal of reducing cardiopulmonary arrests occurring outside the intensive care unit. The results of 6 years' experience indicate that a sustainable and effective rapid response team response can be put into practice without increasing costs or adding positions and can decrease the percentage of cardiopulmonary arrests occurring outside the intensive care unit. ©2014 American Association of Critical-Care Nurses.

Rebuilding health systems in post-conflict countries: estimating the costs of basic services.

PubMed

Newbrander, William; Yoder, Richard; Debevoise, Anne Bilby

2007-01-01

After the fall of the Taliban in 2001, the Afghan transitional government and international donors found the health system near collapse. Afghanistan had some of the worst health indicators ever recorded. To begin activities that would quickly improve the health situation, the Ministry of Health (MOH) needed both a national package of health services and reliable data on the costs of providing those services. This study details the process of determining national health priorities, creating a basic package of services, and estimating per capita and unit costs for providing those services, with an emphasis on the costing exercise. Strategies for obtaining a rapid yet reasonably accurate estimate of health service costs nationwide are discussed. In 2002 this costing exercise indicated that the basic package of services could be provided for US dollars 4.55 per person. In 2006, the findings were validated: the four major donors who contracted with non-governmental organizations (NGOs) to provide basic health services for nearly 80% of the population found per capita costs ranging from dollars 4.30 to dollars 5.12. This study is relevant for other post-conflict countries that are re-establishing health services and seeking to develop cost-effective and equitable health systems. Copyright (c) 2007 John Wiley & Sons, Ltd.

Visible quality aluminum and nickel superpolish polishing technology enabling new missions

NASA Astrophysics Data System (ADS)

Carrigan, Keith G.

2011-06-01

It is now well understood that with US Department of Defense (DoD) budgets shrinking and the Services and Agencies demanding new systems which can be fielded more quickly, cost and schedule are being emphasized more and more. At the same time, the US has ever growing needs for advanced capabilities to support evolving Intelligence, Surveillance and Reconnaissance objectives. In response to this market demand for ever more cost-effective, faster to market, single-channel, athermal optical systems, we have developed new metal polishing technologies which allow for short-lead, low-cost metal substrates to replace more costly, longer-lead material options. In parallel, the commercial marketplace is being driven continually to release better, faster and cheaper electronics. Growth according to Moore's law, enabled by advancements in photolithography, has produced denser memory, higher resolution displays and faster processors. While the quality of these products continues to increase, their price is falling. This seeming paradox is driven by industry advancements in manufacturing technology. The next steps on this curve can be realized via polishing technology which allows low-cost metal substrates to replace costly Silicon based optics for use in ultra-short wavelength systems.

NASA Balloon Highlights 2015-2017

NASA Technical Reports Server (NTRS)

Fairbrother, Debora

2017-01-01

The NASA Balloon Program provides low-cost, quick response, near space access to NASAs science Community for conducting Cutting Edge Science Investigations. Serve as a technology development platform. Excellent training for NASA scientists and engineers.

The Revolution's on Your Desk.

ERIC Educational Resources Information Center

Erickson, Bruce

1987-01-01

The use of desktop publishing at schools, colleges, and universities is described. The advantages include: shorter turnaround, reduced costs, more control and capability, and more fun. However, rapid change and quick obsolescence are inevitable. (MLW)

A Study of the Economic Benefit Potential of Intermodal Transports

NASA Technical Reports Server (NTRS)

Nelson, J. M.; Kawai, R. T.; Gregg, R. D.; McKinley, Robert E., Jr. (Technical Monitor)

2001-01-01

A conceptual study was conducted to determine the benefit potential of an Intermodal Transport in which quick change payload modules are used to reduce the cost of air travel by increasing daily utilization. Three basic concepts varying the degree of modularity were investigated for a 122,000 pounds payload 3,000 NM range regional wide body transport. The profit potential for operating as a passenger transport during the day and as a freighter at night was assessed. Assuming current levels of profitability, Intermodal operations could offer an operating cost reduction potential up to 20%. Enabling technology needs are identified as very quiet aircraft for expanded night operations, distributed load carrying quick disconnect latching, and configuration dependent safety issues. Recommendations are made to explore if additional benefits are possible from alternative mission and usage modules.

Effectively marketing prepaid medical care with decision support systems.

PubMed

Forgionne, G A

1991-01-01

The paper reports a decision support system (DSS) that enables health plan administrators to quickly and easily: (1) manage relevant medical care market (consumer preference and competitors' program) information and (2) convert the information into appropriate medical care delivery and/or payment policies. As the paper demonstrates, the DSS enables providers to design cost efficient and market effective medical care programs. The DSS provides knowledge about subscriber preferences, customer desires, and the program offerings of the competition. It then helps administrators structure a medical care plan in a way that best meets consumer needs in view of the competition. This market effective plan has the potential to generate substantial amounts of additional revenue for the program. Since the system's data base consists mainly of the provider's records, routine transactions, and other readily available documents, the DSS can be implemented at a nominal incremental cost. The paper also evaluates the impact of the information system on the general financial performance of existing dental and mental health plans. In addition, the paper examines how the system can help contain the cost of providing medical care while providing better services to more potential beneficiaries than current approaches.

Junior Purple Log-Warriors: Joint Entry-Level Training for Logistics Personnel

DTIC Science & Technology

2016-02-01

technical training. This option would have the lowest net cost and would be the most effective in joint integration and development of an... premium on the need for all levels of joint logisticians that are able to respond quickly, flexibly, and jointly to the unexpected. The (United States...Army Logistics Management College, is for active or reserve O-3 to O-5s, W-3 to W-5s, E-8 to E-9s, and GS-12 to GS/GM-14s. A similar course of the

Towards Intelligent Interpretation of Low Strain Pile Integrity Testing Results Using Machine Learning Techniques.

PubMed

Cui, De-Mi; Yan, Weizhong; Wang, Xiao-Quan; Lu, Lie-Min

2017-10-25

Low strain pile integrity testing (LSPIT), due to its simplicity and low cost, is one of the most popular NDE methods used in pile foundation construction. While performing LSPIT in the field is generally quite simple and quick, determining the integrity of the test piles by analyzing and interpreting the test signals (reflectograms) is still a manual process performed by experienced experts only. For foundation construction sites where the number of piles to be tested is large, it may take days before the expert can complete interpreting all of the piles and delivering the integrity assessment report. Techniques that can automate test signal interpretation, thus shortening the LSPIT's turnaround time, are of great business value and are in great need. Motivated by this need, in this paper, we develop a computer-aided reflectogram interpretation (CARI) methodology that can interpret a large number of LSPIT signals quickly and consistently. The methodology, built on advanced signal processing and machine learning technologies, can be used to assist the experts in performing both qualitative and quantitative interpretation of LSPIT signals. Specifically, the methodology can ease experts' interpretation burden by screening all test piles quickly and identifying a small number of suspected piles for experts to perform manual, in-depth interpretation. We demonstrate the methodology's effectiveness using the LSPIT signals collected from a number of real-world pile construction sites. The proposed methodology can potentially enhance LSPIT and make it even more efficient and effective in quality control of deep foundation construction.

Voronoi Diagram Based Optimization of Dynamic Reactive Power Sources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Weihong; Sun, Kai; Qi, Junjian

2015-01-01

Dynamic var sources can effectively mitigate fault-induced delayed voltage recovery (FIDVR) issues or even voltage collapse. This paper proposes a new approach to optimization of the sizes of dynamic var sources at candidate locations by a Voronoi diagram based algorithm. It first disperses sample points of potential solutions in a searching space, evaluates a cost function at each point by barycentric interpolation for the subspaces around the point, and then constructs a Voronoi diagram about cost function values over the entire space. Accordingly, the final optimal solution can be obtained. Case studies on the WSCC 9-bus system and NPCC 140-busmore » system have validated that the new approach can quickly identify the boundary of feasible solutions in searching space and converge to the global optimal solution.« less

Quick detection of QRS complexes and R-waves using a wavelet transform and K-means clustering.

PubMed

Xia, Yong; Han, Junze; Wang, Kuanquan

2015-01-01

Based on the idea of telemedicine, 24-hour uninterrupted monitoring on electrocardiograms (ECG) has started to be implemented. To create an intelligent ECG monitoring system, an efficient and quick detection algorithm for the characteristic waveforms is needed. This paper aims to give a quick and effective method for detecting QRS-complexes and R-waves in ECGs. The real ECG signal from the MIT-BIH Arrhythmia Database is used for the performance evaluation. The method proposed combined a wavelet transform and the K-means clustering algorithm. A wavelet transform is adopted in the data analysis and preprocessing. Then, based on the slope information of the filtered data, a segmented K-means clustering method is adopted to detect the QRS region. Detection of the R-peak is based on comparing the local amplitudes in each QRS region, which is different from other approaches, and the time cost of R-wave detection is reduced. Of the tested 8 records (total 18201 beats) from the MIT-BIH Arrhythmia Database, an average R-peak detection sensitivity of 99.72 and a positive predictive value of 99.80% are gained; the average time consumed detecting a 30-min original signal is 5.78s, which is competitive with other methods.

Planning and environmental linkages for historic preservation.

DOT National Transportation Integrated Search

2012-06-01

The Federal Highway Administration (FHWA) and state and local transportation agencies are working hard to deliver projects more quickly and efficiently, and for less cost. Many state departments of transportation (DOT) and local transportation planni...

Outsourcing gets providers back to the basics.

PubMed

Watson, S

1995-05-01

Information technology is advancing so quickly that many organizations can't keep up. That's why demand for the outsourcing of data processing functions is growing as providers and payers attempt to implement the latest technology while holding costs down. Those investigating outsourcing must carefully scrutinize whether an arrangement actually will cut costs, experts advise. And clients should review contract terms to ensure all expectations are spelled out.

Competitive soybean flour/phenol-formaldehyde adhesives for oriented strandboard

Treesearch

James M. Wescott; Charles R. Frihart

2004-01-01

Soy-based glues were very popular early in the 20th century. These adhesives were low cost and allowed for excellent performance in plywood panels as long as they were kept dry. These adhesives were quickly supplanted by lower cost, better performing petroleum-based resins in the middle half of the century. With the recent increase in the price of petroleum, soy-based...

Ozone Treatment For Cooling Towers

NASA Technical Reports Server (NTRS)

Blackwelder, Rick; Baldwin, Leroy V.; Feeney, Ellen S.

1990-01-01

Report presents results of study of cooling tower in which water treated with ozone instead of usual chemical agents. Bacteria and scale reduced without pollution and at low cost. Operating and maintenance costs with treatment about 30 percent of those of treatment by other chemicals. Corrosion rates no greater than with other chemicals. Advantage of ozone, even though poisonous, quickly detected by smell in very low concentrations.

Using QR codes to enable quick access to information in acute cancer care.

PubMed

Upton, Joanne; Olsson-Brown, Anna; Marshall, Ernie; Sacco, Joseph

2017-05-25

Quick access to toxicity management information ensures timely access to steroids/immunosuppressive treatment for cancer patients experiencing immune-related adverse events, thus reducing length of hospital stays or avoiding hospital admission entirely. This article discusses a project to add a QR (quick response) code to a patient-held immunotherapy alert card. As QR code generation is free and the immunotherapy clinical management algorithms were already publicly available through the trust's clinical network website, the costs of integrating a QR code into the alert card, after printing, were low, while the potential benefits are numerous. Patient-held alert cards are widely used for patients receiving anti-cancer treatment, and this established standard of care has been modified to enable rapid access of information through the incorporation of a QR code.

ABEL model: Evaluates corporations` claims of inability to afford penalties and compliance costs (version 3.0.16). Model-simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-11-01

The easy-to-use ABEL software evaluates for-profit company claims of inability to afford penalties, clean-up costs, or compliance costs. Violators raise the issue of inability to pay in most of EPA`s enforcement actions regardless of whether there is any hard evidence supporting those claims. The program enables Federal, State and local enforcement professionals to quickly determine if there was any validity to those claims. ABEL is a tool that promotes quick settlements by performing screening analyses of defendants and potentially responsible parties (PRP`s) to determine their financial capacity. After analyzing some basic financial ratios that reflect a company`s solvency, ABEL assessesmore » the firm`s ability to pay by focusing on projected cash flows. The model explicitly calculates the value of projected, internally generated cash flows from historical tax information, and compares these cash flows to the proposed environmental expenditure(s). The software is extremely easy to use. Version 3.0.16 updates the standard values for inflation and discount rate.« less

Organizing for low cost space operations - Status and plans

NASA Technical Reports Server (NTRS)

Lee, C.

1976-01-01

Design features of the Space Transportation System (vehicle reuse, low cost expendable components, simple payload interfaces, standard support systems) must be matched by economical operational methods to achieve low operating and payload costs. Users will be responsible for their own payloads and will be charged according to the services they require. Efficient use of manpower, simple documentation, simplified test, checkout, and flight planning are firm goals, together with flexibility for quick response to varying user needs. Status of the Shuttle hardware, plans for establishing low cost procedures, and the policy for user charges are discussed.

Minimum-Cost Aircraft Descent Trajectories with a Constrained Altitude Profile

NASA Technical Reports Server (NTRS)

Wu, Minghong G.; Sadovsky, Alexander V.

2015-01-01

An analytical formula for solving the speed profile that accrues minimum cost during an aircraft descent with a constrained altitude profile is derived. The optimal speed profile first reaches a certain speed, called the minimum-cost speed, as quickly as possible using an appropriate extreme value of thrust. The speed profile then stays on the minimum-cost speed as long as possible, before switching to an extreme value of thrust for the rest of the descent. The formula is applied to an actual arrival route and its sensitivity to winds and airlines' business objectives is analyzed.

Adaptive Information Dissemination Control to Provide Diffdelay for the Internet of Things.

PubMed

Liu, Xiao; Liu, Anfeng; Huang, Changqin

2017-01-12

Applications running on the Internet of Things, such as the Wireless Sensor and Actuator Networks (WSANs) platform, generally have different quality of service (QoS) requirements. For urgent events, it is crucial that information be reported to the actuator quickly, and the communication cost is the second factor. However, for interesting events, communication costs, network lifetime and time all become important factors. In most situations, these different requirements cannot be satisfied simultaneously. In this paper, an adaptive communication control based on a differentiated delay (ACCDS) scheme is proposed to resolve this conflict. In an ACCDS, source nodes of events adaptively send various searching actuators routings (SARs) based on the degree of sensitivity to delay while maintaining the network lifetime. For a delay-sensitive event, the source node sends a large number of SARs to actuators to identify and inform the actuators in an extremely short time; thus, action can be taken quickly but at higher communication costs. For delay-insensitive events, the source node sends fewer SARs to reduce communication costs and improve network lifetime. Therefore, an ACCDS can meet the QoS requirements of different events using a differentiated delay framework. Theoretical analysis simulation results indicate that an ACCDS provides delay and communication costs and differentiated services; an ACCDS scheme can reduce the network delay by 11.111%-53.684% for a delay-sensitive event and reduce the communication costs by 5%-22.308% for interesting events, and reduce the network lifetime by about 28.713%.

Adaptive Information Dissemination Control to Provide Diffdelay for the Internet of Things

PubMed Central

Liu, Xiao; Liu, Anfeng; Huang, Changqin

2017-01-01

Applications running on the Internet of Things, such as the Wireless Sensor and Actuator Networks (WSANs) platform, generally have different quality of service (QoS) requirements. For urgent events, it is crucial that information be reported to the actuator quickly, and the communication cost is the second factor. However, for interesting events, communication costs, network lifetime and time all become important factors. In most situations, these different requirements cannot be satisfied simultaneously. In this paper, an adaptive communication control based on a differentiated delay (ACCDS) scheme is proposed to resolve this conflict. In an ACCDS, source nodes of events adaptively send various searching actuators routings (SARs) based on the degree of sensitivity to delay while maintaining the network lifetime. For a delay-sensitive event, the source node sends a large number of SARs to actuators to identify and inform the actuators in an extremely short time; thus, action can be taken quickly but at higher communication costs. For delay-insensitive events, the source node sends fewer SARs to reduce communication costs and improve network lifetime. Therefore, an ACCDS can meet the QoS requirements of different events using a differentiated delay framework. Theoretical analysis simulation results indicate that an ACCDS provides delay and communication costs and differentiated services; an ACCDS scheme can reduce the network delay by 11.111%–53.684% for a delay-sensitive event and reduce the communication costs by 5%–22.308% for interesting events, and reduce the network lifetime by about 28.713%. PMID:28085097

Distributed Bees Algorithm Parameters Optimization for a Cost Efficient Target Allocation in Swarms of Robots

PubMed Central

Jevtić, Aleksandar; Gutiérrez, Álvaro

2011-01-01

Swarms of robots can use their sensing abilities to explore unknown environments and deploy on sites of interest. In this task, a large number of robots is more effective than a single unit because of their ability to quickly cover the area. However, the coordination of large teams of robots is not an easy problem, especially when the resources for the deployment are limited. In this paper, the Distributed Bees Algorithm (DBA), previously proposed by the authors, is optimized and applied to distributed target allocation in swarms of robots. Improved target allocation in terms of deployment cost efficiency is achieved through optimization of the DBA’s control parameters by means of a Genetic Algorithm. Experimental results show that with the optimized set of parameters, the deployment cost measured as the average distance traveled by the robots is reduced. The cost-efficient deployment is in some cases achieved at the expense of increased robots’ distribution error. Nevertheless, the proposed approach allows the swarm to adapt to the operating conditions when available resources are scarce. PMID:22346677

Filtrates & Residues: A Convenient, Low-Cost Method for Determining Sulfate in Acid Rain.

ERIC Educational Resources Information Center

Johns, Nicholas; Longstaff, Stephen J.

1987-01-01

Describes efforts in devising a method for determining sulfate quickly and accurately from rainwater samples. Explains the design and operation of the apparatus and identifies the solutions for the testing. (ML)

RFID Torque Sensing Tag System for Fasteners

NASA Technical Reports Server (NTRS)

Fink, Patrick W. (Inventor); Lin, Gregory Y. (Inventor); Ngo, Phong H. (Inventor); Kennedy, Timothy F. (Inventor)

2016-01-01

The present invention provides an RFID-based torque sensor that can be used to quickly monitor off the shelf fasteners including fasteners that are used in expensive satellites or other uses where fastener failure can be very costly. In one embodiment, an antenna, RFID ring and spring comprise a sensor tag that can be interrogated with an interrogation signal produced by an interrogator device. When sufficient torque is applied to the fastener, an RFID circuit is connected, and produces a radio frequency (RF) signal that can be read by the interrogator. In one embodiment, the RFID circuit does not transmit when the spring member is not compressed, thereby indicating insufficient tensioning of the fastener. The present invention offers the ability to remotely, quickly, and inexpensively verify that any number of fasteners are torqued properly upon initial installation. Where applicable, the present invention allows low cost monitoring over the life of the fastener.

A global economic model to assess the cost-effectiveness of new treatments for advanced breast cancer in Canada.

PubMed

Beauchemin, C; Letarte, N; Mathurin, K; Yelle, L; Lachaine, J

2016-06-01

Objective Considering the increasing number of treatment options for metastatic breast cancer (MBC), it is important to develop high-quality methods to assess the cost-effectiveness of new anti-cancer drugs. This study aims to develop a global economic model that could be used as a benchmark for the economic evaluation of new therapies for MBC. Methods The Global Pharmacoeconomics of Metastatic Breast Cancer (GPMBC) model is a Markov model that was constructed to estimate the incremental cost per quality-adjusted life years (QALY) of new treatments for MBC from a Canadian healthcare system perspective over a lifetime horizon. Specific parameters included in the model are cost of drug treatment, survival outcomes, and incidence of treatment-related adverse events (AEs). Global parameters are patient characteristics, health states utilities, disutilities, and costs associated with treatment-related AEs, as well as costs associated with drug administration, medical follow-up, and end-of-life care. The GPMBC model was tested and validated in a specific context, by assessing the cost-effectiveness of lapatinib plus letrozole compared with other widely used first-line therapies for post-menopausal women with hormone receptor-positive (HR+) and epidermal growth factor receptor 2-positive (HER2+) MBC. Results When tested, the GPMBC model led to incremental cost-utility ratios of CA$131 811 per QALY, CA$56 211 per QALY, and CA$102 477 per QALY for the comparison of lapatinib plus letrozole vs letrozole alone, trastuzumab plus anastrozole, and anastrozole alone, respectively. Results of the model testing were quite similar to those obtained by Delea et al., who also assessed the cost-effectiveness of lapatinib in combination with letrozole in HR+/HER2 + MBC in Canada, thus suggesting that the GPMBC model can replicate results of well-conducted economic evaluations. Conclusions The GPMBC model can be very valuable as it allows a quick and valid assessment of the cost-effectiveness of any new treatments for MBC in a Canadian context.

The potential of crowdsourcing to improve patient-centered care.

PubMed

Weiner, Michael

2014-01-01

Crowdsourcing (CS) is the outsourcing of a problem or task to a crowd. Although patient-centered care (PCC) may aim to be tailored to an individual's needs, the uses of CS for generating ideas, identifying values, solving problems, facilitating research, and educating an audience represent powerful roles that can shape both allocation of shared resources and delivery of personalized care and treatment. CS can often be conducted quickly and at relatively low cost. Pitfalls include bias, risks of research ethics, inadequate quality of data, inadequate metrics, and observer-expectancy effect. Health professionals and consumers in the US should increase their attention to CS for the benefit of PCC. Patients' participation in CS to shape health policy and decisions is one way to pursue PCC itself and may help to improve clinical outcomes through a better understanding of patients' perspectives. CS should especially be used to traverse the quality-cost curve, or decrease costs while preserving or improving quality of care.

Emerging technologies for pediatric and adult trauma care.

PubMed

Moulton, Steven L; Haley-Andrews, Stephanie; Mulligan, Jane

2010-06-01

Current Emergency Medical Service protocols rely on provider-directed care for evaluation, management and triage of injured patients from the field to a trauma center. New methods to quickly diagnose, support and coordinate the movement of trauma patients from the field to the most appropriate trauma center are in development. These methods will enhance trauma care and promote trauma system development. Recent advances in machine learning, statistical methods, device integration and wireless communication are giving rise to new methods for vital sign data analysis and a new generation of transport monitors. These monitors will collect and synchronize exponentially growing amounts of vital sign data with electronic patient care information. The application of advanced statistical methods to these complex clinical data sets has the potential to reveal many important physiological relationships and treatment effects. Several emerging technologies are converging to yield a new generation of smart sensors and tightly integrated transport monitors. These technologies will assist prehospital providers in quickly identifying and triaging the most severely injured children and adults to the most appropriate trauma centers. They will enable the development of real-time clinical support systems of increasing complexity, able to provide timelier, more cost-effective, autonomous care.

Characterizing Task-Based OpenMP Programs

PubMed Central

Muddukrishna, Ananya; Jonsson, Peter A.; Brorsson, Mats

2015-01-01

Programmers struggle to understand performance of task-based OpenMP programs since profiling tools only report thread-based performance. Performance tuning also requires task-based performance in order to balance per-task memory hierarchy utilization against exposed task parallelism. We provide a cost-effective method to extract detailed task-based performance information from OpenMP programs. We demonstrate the utility of our method by quickly diagnosing performance problems and characterizing exposed task parallelism and per-task instruction profiles of benchmarks in the widely-used Barcelona OpenMP Tasks Suite. Programmers can tune performance faster and understand performance tradeoffs more effectively than existing tools by using our method to characterize task-based performance. PMID:25860023

Lasers in orthodontics

PubMed Central

Nalcaci, Ruhi; Cokakoglu, Serpil

2013-01-01

Many types of dental lasers are currently available that can be efficiently used for soft and hard tissue applications in the field of orthodontics. For achieving the desired effects in the target tissue, knowledge of laser characteristics such as power, wavelength and timing, is necessary. Laser therapy is advantageous because it often avoids bleeding, can be pain free, is non-invasive and is relatively quick. The high cost is its primary disadvantage. It is very important to take the necessary precautions to prevent possible tissue damage when using laser dental systems. Here, we reviewed the main types and characteristics of laser systems used in dental practice and discuss the applications of lasers in orthodontics, harmful effects and laser system safety. PMID:24966719

Liquid fuel supplies

NASA Astrophysics Data System (ADS)

Perry, H.

1980-06-01

This paper presents an overview of United States and world petroleum, natural gas, and natural gas liquids presumed recoverable but as yet undiscovered resources and suggests that the depletion of these fuels may not occur as quickly as frequently predicted. The paper points out that the construction of a synthetic fuels industry will be very costly and will provide only a small amount of increased energy independence. The fear is expressed that haste in accepting a specific synfuels process on the basis of present technology may serve to forestall the development of a better technology. The paper suggests that we construct relatively few plants now each using a different technology in order to gain better understanding of the various technologies, more information on costs and the essential but as yet unknown information on environmental and socioeconomic effects of large scale plants.

Point-of-care D-dimer testing in emergency departments.

PubMed

Marquardt, Udo; Apau, Daniel

2015-09-01

Overcrowding and prolonged patient stays in emergency departments (EDs) affect patients' experiences and outcomes, and increase healthcare costs. One way of addressing these problems is through using point-of-care blood tests, laboratory testing undertaken near patient locations with rapidly available results. D-dimer tests are used to exclude venous thromboembolism (VTE), a common presentation in EDs, in low-risk patients. However, data on the effects of point-of-care D-dimer testing in EDs and other urgent care settings are scarce. This article reports the results of a literature review that examined the benefits to patients of point-of-care D-dimer testing in terms of reduced turnaround times (time to results), and time to diagnosis, discharge or referral. It also considers the benefits to organisations in relation to reduced ED crowding and increased cost effectiveness. The review concludes that undertaking point-of-care D-dimer tests, combined with pre-test probability scores, can be a quick and safe way of ruling out VTE and improving patients' experience.

Comparison of airborne lidar measurements with 420 kHz echo-sounder measurements of zooplankton.

PubMed

Churnside, James H; Thorne, Richard E

2005-09-10

Airborne lidar has the potential to survey large areas quickly and at a low cost per kilometer along a survey line. For this reason, we investigated the performance of an airborne lidar for surveys of zooplankton. In particular, we compared the lidar returns with echo-sounder measurements of zooplankton in Prince William Sound, Alaska. Data from eight regions of the Sound were compared, and the correlation between the two methods was 0.78. To obtain this level of agreement, a threshold was applied to the lidar return to remove the effects of scattering from phytoplankton.

Integrated green algal technology for bioremediation and biofuel.

PubMed

Sivakumar, Ganapathy; Xu, Jianfeng; Thompson, Robert W; Yang, Ying; Randol-Smith, Paula; Weathers, Pamela J

2012-03-01

Sustainable non-food energy biomass and cost-effective ways to produce renewable energy technologies from this biomass are continuously emerging. Algae are capable of producing lipids and hydrocarbons quickly and their photosynthetic abilities make them a promising candidate for an alternative energy source. In addition, their favorable carbon life cycle and a renewed focus on rural economic development are attractive factors. In this review the focus is mainly on the integrated approach of algae culture for bioremediation and oil-based biofuel production with mention of possible other value-added benefits of using algae for those purposes. Published by Elsevier Ltd.

Towards Intelligent Interpretation of Low Strain Pile Integrity Testing Results Using Machine Learning Techniques

PubMed Central

Cui, De-Mi; Wang, Xiao-Quan; Lu, Lie-Min

2017-01-01

Low strain pile integrity testing (LSPIT), due to its simplicity and low cost, is one of the most popular NDE methods used in pile foundation construction. While performing LSPIT in the field is generally quite simple and quick, determining the integrity of the test piles by analyzing and interpreting the test signals (reflectograms) is still a manual process performed by experienced experts only. For foundation construction sites where the number of piles to be tested is large, it may take days before the expert can complete interpreting all of the piles and delivering the integrity assessment report. Techniques that can automate test signal interpretation, thus shortening the LSPIT’s turnaround time, are of great business value and are in great need. Motivated by this need, in this paper, we develop a computer-aided reflectogram interpretation (CARI) methodology that can interpret a large number of LSPIT signals quickly and consistently. The methodology, built on advanced signal processing and machine learning technologies, can be used to assist the experts in performing both qualitative and quantitative interpretation of LSPIT signals. Specifically, the methodology can ease experts’ interpretation burden by screening all test piles quickly and identifying a small number of suspected piles for experts to perform manual, in-depth interpretation. We demonstrate the methodology’s effectiveness using the LSPIT signals collected from a number of real-world pile construction sites. The proposed methodology can potentially enhance LSPIT and make it even more efficient and effective in quality control of deep foundation construction. PMID:29068431

Assessment of Needs for Further Research to Understand the Role of Governments in Supporting Geothermal Exploration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Speer, Bethany; Young, Kate

This paper looks at financing barriers to geothermal resource exploration in the United States (U.S.) for electricity generation projects and analyzes why the market is not developing as quickly as foreign geothermal markets or as quickly as other renewable energy technologies in the U.S. Research opportunities and approaches to understanding these discrepancies are discussed, particularly whether government policies and programs are spurring development activities. Further analysis to understand policies, programmatic cost efficiencies, potential project revenues, and other economic impacts are recommended together with the preliminary conclusions.

Connection details for prefabricated bridge elements and systems.

DOT National Transportation Integrated Search

2009-03-30

Prefabricated components of a bridge produced off-site can be assembled quickly, and can reduce design time and cost, minimizing forming, minimize lane closure time and/or possibly eliminate the need for a temporary bridge. This document has been dev...

USE OF EXPERT RATINGS AS SAMPLING STRATA FOR A MORE COST-EFFECTIVE PROBABILITY SAMPLE OF A RARE POPULATION

PubMed Central

McCaffrey, Daniel; Perlman, Judith; Marshall, Grant N.; Hambarsoomians, Katrin

2010-01-01

We consider situations in which externally observable characteristics allow experts to quickly categorize individual households as likely or unlikely to contain a member of a rare target population. This classification can form the basis of disproportionate stratified sampling such that households classified as “unlikely” are sampled at a lower rate than those classified as “likely,” thereby reducing screening costs. Design weights account for this approach and allow unbiased estimates for the target population. We demonstrate that with sensitivity and specificity of expert classification at least 70%, and ideally at least 80%, our approach can economically increase effective sample size for a rare population. We develop heuristics for implementing this approach and demonstrate that sensitivity drives design effects and screening costs whereas specificity only drives the latter. We demonstrate that the potential gains from this approach increase as the target population becomes rarer. We further show that for most applications, unlikely strata should be sampled at 1/6 to ½ the rate of likely strata. This approach was applied to a survey of Cambodian immigrants in which the 82% of households rated “unlikely” were sampled at ¼ the rate as “likely” households, reducing screening from 9.4 to 4.0 approaches per complete. Sensitivity and specificity were 86% and 91% respectively. Weighted estimation had a design effect of 1.26 so screening costs per effective sample size were reduced 47%. We also note that in this instance, expert classification appeared to be uncorrelated with survey outcomes of interest among eligibles. PMID:20936050

Quit for My Finances | Smokefree 60+

Cancer.gov

You can save money by quitting smoking. Why should you quit now? The cost of smoking adds up quickly. If you smoke a pack a day, you're spending at least $43 per week. Use the calculator to find out how much you could save if you quit today. These amounts are based on a 2015 national average price of about $6.25 per pack. Depending on where you live, the cost of cigarettes could be more.

Fragile Relationships: Japan, High Technology, and U.S. Vital Interests

DTIC Science & Technology

1990-04-04

costs ; better manufacturing techniques; higher quality products; excellent marketing plans; and, direct and indirect government support. 5 Akio...short-term and have not looked to the future, as have the Japanese. The stockholders’ demand for large, quick profits often cost market shares and...grip the country as we use increasing amounts of our wealth to service the national debt. Japan will be our creditor. U.S. market shares, both

Quit for My Finances | Smokefree 60+

Cancer.gov

You can save money by quitting smoking. Why should you quit now? The cost of smoking adds up quickly. If you smoke a pack a day, you're spending at least $45 per week. Use the calculator to find out how much you could save if you quit today. These amounts are based on a 2018 national average price of about $6.35 per pack. Depending on where you live, the cost of cigarettes could be more.

Quick Phases of Infantile Nystagmus Show the Saccadic Inhibition Effect

PubMed Central

Harrison, James J.; Sumner, Petroc; Dunn, Matt J.; Erichsen, Jonathan T.; Freeman, Tom C. A.

2015-01-01

Purpose. Infantile nystagmus (IN) is a pathological, involuntary oscillation of the eyes consisting of slow, drifting eye movements interspersed with rapid reorienting quick phases. The extent to which quick phases of IN are programmed similarly to saccadic eye movements remains unknown. We investigated whether IN quick phases exhibit ‘saccadic inhibition,' a phenomenon typically related to normal targeting saccades, in which the initiation of the eye movement is systematically delayed by task-irrelevant visual distractors. Methods. We recorded eye position from 10 observers with early-onset idiopathic nystagmus while task-irrelevant distractor stimuli were flashed along the top and bottom of a large screen at ±10° eccentricity. The latency distributions of quick phases were measured with respect to these distractor flashes. Two additional participants, one with possible albinism and one with fusion maldevelopment nystagmus syndrome, were also tested. Results. All observers showed that a distractor flash delayed the execution of quick phases that would otherwise have occurred approximately 100 ms later, exactly as in the standard saccadic inhibition effect. The delay did not appear to differ between the two main nystagmus types under investigation (idiopathic IN with unidirectional and bidirectional jerk). Conclusions. The presence of the saccadic inhibition effect in IN quick phases is consistent with the idea that quick phases and saccades share a common programming pathway. This could allow quick phases to take on flexible, goal-directed behavior, at odds with the view that IN quick phases are stereotyped, involuntary eye movements. PMID:25670485

Systematic review of the relationship between quick returns in rotating shift work and health-related outcomes.

PubMed

Vedaa, Øystein; Harris, Anette; Bjorvatn, Bjørn; Waage, Siri; Sivertsen, Børge; Tucker, Philip; Pallesen, Ståle

2016-01-01

A systematic literature search was carried out to investigate the relationship between quick returns (i.e., 11.0 hours or less between two consecutive shifts) and outcome measures of health, sleep, functional ability and work-life balance. A total of 22 studies published in 21 articles were included. Three types of quick returns were differentiated (from evening to morning/day, night to evening, morning/day to night shifts) where sleep duration and sleepiness appeared to be differently affected depending on which shifts the quick returns occurred between. There were some indications of detrimental effects of quick returns on proximate problems (e.g., sleep, sleepiness and fatigue), although the evidence of associations with more chronic outcome measures (physical and mental health and work-life balance) was inconclusive. Modern societies are dependent on people working shifts. This study systematically reviews literature on the consequences of quick returns (11.0 hours or less between two shifts). Quick returns have detrimental effects on acute health problems. However, the evidence regarding effects on chronic health is inconclusive.

Feasibility study of an orbiting laboratory for testing CSI technology

NASA Technical Reports Server (NTRS)

Bicos, Andrew S.; Loboda, Gregory G.

1993-01-01

A concept for an orbiting laboratory for testing Controls-Structures Integration (CSI) technology is described. The CSI-Star concept reflects a lower cost, higher risk approach. The concept supports demonstration and validation testing for critical CSI technologies at a cost of $20M to $26M with a 1-year reliability of approximately 0.9. The Ball Aerospace QuickStar bus is the carrier for the CSI test article. QuickStar is launched as a secondary payload on the McDonnell Douglas Delta 2. The QuickStar/Delta 2 approach is flight proven. The CSI test article is a 20 foot, 1 Hz, truss beam which is deployed from the QuickStar bus. The test article is well instrumented for quality system identification. The laboratory provides three layers of active control consisting of global vibration suppression along the truss beam, vibration isolation between the beam and instrument platforms, and vibration compensation through the use of gimbaled platforms which point lasers relative to optical sensor targets. The configuration simulates the dynamics of multi-instrument science platforms such as those of the Earth Observation System (EOS) while maintaining strong ties to astrophysics missions such as the Optical Interferometer. Uplink/downlink services and a reprogrammable computer provide flexibility for long-term investigations by members of the CSI community (NASA, DoD, academia, and industry). CSI-Star fills the gap between short-term experiments, which have been conducted primarily on the Shuttle, and future science missions which require the technology. The on-orbit maturity of CSI technology must be established to obtain acceptance by project managers and to promote injection of the technology into future science missions.

Preliminary engineering study: Quick opening valve MSFC high Reynolds number wind tunnel

NASA Technical Reports Server (NTRS)

1983-01-01

FluiDyne Engineering Corporation has conducted a preliminary engineering study of a quick-opening valve for the MSFC High Reynolds Number Wind Tunnel under NASA Contract NAS8-35056. The subject valve is intended to replace the Mylar diaphragm system as the flow initiation device for the tunnel. Only valves capable of opening within 0.05 sec. and providing a minimum of 11.4 square feet of flow area were considered. Also, the study focused on valves which combined the quick-opening and tight shutoff features in a single unit. A ring sleeve valve concept was chosen for refinement and pricing. Sealing for tight shutoff, ring sleeve closure release and sleeve actuation were considered. The resulting cost estimate includes the valve and requisite modifications to the facility to accommodate the valve as well as the associated design and development work.

Application of Motion Induced Remote-Field Eddy-Current effect to online inspection and quality examination of rolling metallic strips

NASA Astrophysics Data System (ADS)

Sun, Yushi; Udpa, Satish; Lord, William; Udpa, Lalita; Ouyang, Tianhe

2001-04-01

The Motion Induced Remote-Field Eddy-Current (MIRFEC) effect was first observed in 1994. The effect was first exploited for detecting pipeline stress corrosion cracks as a part of a research project sponsored by the U.S. Department of Transportation. This paper presents a new application of the MIRFEC effect for online inspection of rolling metallic strips. Currently, rolled metallic strips and sheets are inspected off-line, which is costly, time consuming and not ideal for quality control. A well-designed online diagnostic and control system for metal rolling process may be able to reduce cost, improve quality, and hence enhance competitiveness of the product. The overall objective of this paper is to demonstrate the feasibility of a new nondestructive measurement system for on-line diagnostics and control of metallic rolling process using the MIRFEC effect. The system can be used to monitor, in real time, metallic strips/sheets for possible anomalies, inclusions, voids, bubbles, lamination, as well as variations in its magnetic and other properties. The potential advantages of the MIRFEC system include simplicity, robustness, low cost, high reliability, quick and accurate signal classification and characterization. Such systems can be used for real-time process control, or off-line data analysis. The technique also allows operation at high temperatures, tolerates large lift-off and vibration, and high rolling speed. Results of finite element modeling of the MIRFEC effect and experimental measurement data obtained from a prototype system are presented.

Fabrication of multi-functional silicon surface by direct laser writing

NASA Astrophysics Data System (ADS)

Verma, Ashwani Kumar; Soni, R. K.

2018-05-01

We present a simple, quick and one-step methodology based on nano-second laser direct writing for the fabrication of micro-nanostructures on silicon surface. The fabricated surfaces suppress the optical reflection by multiple reflection due to light trapping effect to a much lower value than polished silicon surface. These textured surfaces offer high enhancement ability after gold nanoparticle deposition and then explored for Surface Enhanced Raman Scattering (SERS) for specific molecular detection. The effect of laser scanning line interval on optical reflection and SERS signal enhancement ability was also investigated. Our results indicate that low optical reflection substrates exhibit uniform SERS enhancement with enhancement factor of the order of 106. Furthermore, this methodology provide an alternative approach for cost-effective large area fabrication with good control over feature size.

A techno-economic analysis and optimization of Li-ion batteries for light-duty passenger vehicle electrification

NASA Astrophysics Data System (ADS)

Sakti, Apurba; Michalek, Jeremy J.; Fuchs, Erica R. H.; Whitacre, Jay F.

2015-01-01

We conduct a techno-economic analysis of Li-ion NMC-G prismatic pouch battery and pack designs for electric vehicle applications. We develop models of power capability and manufacturing operations to identify the minimum cost cell and pack designs for a variety of plug-in hybrid electric vehicle (PHEV) and battery electric vehicle (BEV) requirements. We find that economies of scale in battery manufacturing are reached quickly at a production volume of ∼200-300 MWh annually. Increased volume does little to reduce unit costs, except potentially indirectly through factors such as experience, learning, and innovation. We also find that vehicle applications with larger energy requirements are able to utilize cheaper cells due in part to the use of thicker electrodes. The effect on cost can be substantial. In our base case, we estimate pack-level battery production costs of ∼545 kWh-1 for a PHEV with a 10 mile (16 km) all-electric range (PHEV10) and ∼230 kWh-1 for a BEV with a 200 mile (320 km) all-electric range (BEV200). This 58% reduction, from 545 kWh-1 to 230 kWh-1, is a larger effect than the uncertainty represented by our optimistic and pessimistic scenarios. Electrodes thicker than about 100 or 125 microns are not currently used in practice due to manufacturing and durability concerns, but relaxing this constraint could further lower the cost of larger capacity BEV200 packs by up to an additional 8%.

Orbit Clustering Based on Transfer Cost

NASA Technical Reports Server (NTRS)

Gustafson, Eric D.; Arrieta-Camacho, Juan J.; Petropoulos, Anastassios E.

2013-01-01

We propose using cluster analysis to perform quick screening for combinatorial global optimization problems. The key missing component currently preventing cluster analysis from use in this context is the lack of a useable metric function that defines the cost to transfer between two orbits. We study several proposed metrics and clustering algorithms, including k-means and the expectation maximization algorithm. We also show that proven heuristic methods such as the Q-law can be modified to work with cluster analysis.

A simple and cheap system to speed up and to control the tumescent technique procedure: the Tedde's system.

PubMed

Rubino, C; Marongiu, F; Manzo, M J; Tedde, G; Madonia, M; Campus, G V; Farace, F

2014-06-01

We have devised a low cost system to quickly infiltrate tumescent solution: we call it the "Tedde's system". This low-cost system offers an improvement in quality and quantity of the infiltration because all the procedure depends on the operators, reducing also the time of the infiltration and consequently of the whole surgical procedure. Moreover, this system can be applied to other surgical procedure that requires large infiltration volumes.

We Will Find A Way: Understanding the Legacy of Canadian Special Operations Forces

DTIC Science & Technology

2012-02-01

and numerous contemporary English accounts conceded that the Canadian raiders “are well known to be the most dangerous enemy of any... reckoned...of the 1st Canadian Parachute Bat- talion, at great cost and personal sacrifice, pioneered a new innovative form of warfare and demonstrated agility...The MND quickly realized the strategic impact at a relatively low cost , that even a small SOF task force could achieve. As such, he pushed for

From functional structure to packaging: full-printing fabrication of a microfluidic chip.

PubMed

Zheng, Fengyi; Pu, Zhihua; He, Enqi; Huang, Jiasheng; Yu, Bocheng; Li, Dachao; Li, Zhihong

2018-05-24

This paper presents a concept of a full-printing methodology aiming at convenient and fast fabrication of microfluidic devices. For the first time, we achieved a microfluidic biochemical sensor with all functional structures fabricated by inkjet printing, including electrodes, immobilized enzymes, microfluidic components and packaging. With the cost-effective and rapid process, this method provides the possibility of quick model validation of a novel lab-on-chip system. In this study, a three-electrode electrochemical system was integrated successfully with glucose oxidase immobilization gel and sealed in an ice channel, forming a disposable microfluidic sensor for glucose detection. This fully-printed chip was characterized and showed good sensitivity and a linear section at a low-level concentration of glucose (0-10 mM). With the aid of automatic equipment, the fully-printed sensor can be massively produced with low cost.

New Technique for Fabrication of Scanning Single-Electron Transistor Microscopy Tips

NASA Astrophysics Data System (ADS)

Goodwin, Eric; Tessmer, Stuart

Fabrication of glass tips for Scanning Single-Electron Transistor Microscopy (SSETM) can be expensive, time consuming, and inconsistent. Various techniques have been tried, with varying levels of success in regards to cost and reproducibility. The main requirement for SSETM tips is to have a sharp tip ending in a micron-scale flat face to allow for deposition of a quantum dot. Drawing inspiration from methods used to create tips from optical fibers for Near-Field Scanning Optical Microscopes, our group has come up with a quick and cost effective process for creating SSETM tips. By utilizing hydrofluoric acid to etch the tips and oleic acid to guide the etch profile, optical fiber tips with appropriate shaping can be rapidly prepared. Once etched, electric leads are thermally evaporated onto each side of the tip, while an aluminum quantum dot is evaporated onto the face. Preliminary results using various metals, oxide layers, and lead thicknesses have proven promising.

Spatial Phase Imaging

NASA Technical Reports Server (NTRS)

2006-01-01

Frequently, scientists grow crystals by dissolving a protein in a specific liquid solution, and then allowing that solution to evaporate. The methods used next have been, variously, invasive (adding a dye that is absorbed by the protein), destructive (crushing protein/salt-crystal mixtures and observing differences between the crushing of salt and protein), or costly and time-consuming (X-ray crystallography). In contrast to these methods, a new technology for monitoring protein growth, developed in part through NASA Small Business Innovation Research (SBIR) funding from Marshall Space Flight Center, is noninvasive, nondestructive, rapid, and more cost effective than X-ray analysis. The partner for this SBIR, Photon-X, Inc., of Huntsville, Alabama, developed spatial phase imaging technology that can monitor crystal growth in real time and in an automated mode. Spatial phase imaging scans for flaws quickly and produces a 3-D structured image of a crystal, showing volumetric growth analysis for future automated growth.

Laserprinter applications in a medical graphics department.

PubMed

Lynch, P J

1987-01-01

Our experience with the Apple Macintosh and LaserWriter equipment has convinced us that lasergraphics holds much current and future promise in the creation of line graphics and typography for the biomedical community. Although we continue to use other computer graphics equipment to produce color slides and an occasional pen-plotter graphic, the most rapidly growing segment of our graphics workload is in material well-suited to production on the Macintosh/LaserWriter system. At present our goal is to integrate all of our computer graphics production (color slides, video paint graphics and monochrome print graphics) into a single Macintosh-based system within the next two years. The software and hardware currently available are capable of producing a wide range of science graphics very quickly and inexpensively. The cost-effectiveness, versatility and relatively low initial investment required to install this equipment make it an attractive alternative for cost-recovery departments just entering the field of computer graphics.

A Survey of UML Based Regression Testing

NASA Astrophysics Data System (ADS)

Fahad, Muhammad; Nadeem, Aamer

Regression testing is the process of ensuring software quality by analyzing whether changed parts behave as intended, and unchanged parts are not affected by the modifications. Since it is a costly process, a lot of techniques are proposed in the research literature that suggest testers how to build regression test suite from existing test suite with minimum cost. In this paper, we discuss the advantages and drawbacks of using UML diagrams for regression testing and analyze that UML model helps in identifying changes for regression test selection effectively. We survey the existing UML based regression testing techniques and provide an analysis matrix to give a quick insight into prominent features of the literature work. We discuss the open research issues like managing and reducing the size of regression test suite, prioritization of the test cases that would be helpful during strict schedule and resources that remain to be addressed for UML based regression testing.

[Rocuronium and sugammadex in emergency medicine: requirements of a muscle relaxant for rapid sequence induction].

PubMed

Luxen, J; Trentzsch, H; Urban, B

2014-04-01

The required characteristics of neuromuscular blockers for rapid sequence induction (RSI) are clearly defined: nearly immediate effectiveness and short duration of effect. These demands are not only necessary for ideal conditions of quick endotracheal intubation without mask-bag intermediate ventilation but are also essential to enable a quick return to sufficient spontaneous breathing in case of a cannot intubate cannot ventilate situation. Until recently only succinylcholine had these characteristics; however, a considerable number of dangerous side effects and contraindications had to be accepted. In 1996, rocuronium was introduced, which was capable of immediately establishing good intubation conditions similar to succinylcholine. However, the median duration of effect is 45-60 min and it therefore contains a risk if the patient cannot be ventilated and oxygenated. Therefore, rocuronium is considered a good alternative but not a complete substitute for succinylcholine. The introduction of sugammadex in 2008 for quick reversal of rocuronium changed matters. Comparative studies from the past 4 years dealing with rocuronium/sugammadex versus uccinylcholine in RSI showed that rocuronium and sugammadex combined enabled a significantly faster return to sufficient spontaneous ventilation in emergency situations and also proved that the use of rocuronium significantly reduced the degree of desaturation during the interval between injection and ventilation postintubation. rocuronium used in hospital is a very good substitute for succinylcholine as a neuromuscular blocker during RSI as long as sugammadex is at hand for reversal. It remains to be considered that in a situation with severe problems of the airway and breathing, which are the main preclinical indications for intubation, a forward strategy for ventilation of the patient is the only acceptable way in most cases and the return to spontaneous breathing is not an alternative. Therefore, the value of sugammadex and also of succinylcholine is limited for these situations. Additionally, economic factors such as storage conditions for rocuronium and the cost of sugammadex must also be considered.

Streamlining Building Efficiency Evaluation with DOE's Asset Score Preview

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goel, Supriya; Wang, Nora; Gonzalez, Juan

2016-08-26

Building Energy Asset Score (Asset Score), developed by the Pacific Northwest National Laboratory (PNNL) for the U.S. Department of Energy (DOE), is a tool to help building owners and managers assess the efficiency of a building's energy-related systems and encourage investment in cost-effective improvements. The Asset Score uses an EnergyPlus model to provide a quick assessment of building energy performance with minimum user inputs of building characteristics and identifies upgrade opportunities. Even with a reduced set of user inputs, data collection remains a challenge for wide-spread adoption, especially when evaluating a large number of buildings. To address this, Asset Scoremore » Preview was developed to allow users to enter as few as seven building characteristics to quickly assess their buildings before a more in-depth analysis. A streamlined assessment from Preview to full Asset Score provides an easy entry point and also enables users who manage a large number of buildings to screen and prioritize buildings that can benefit most from a more detailed evaluation and possible energy efficiency upgrades without intensive data collection.« less

Methodologies for Improving Flight Project Information Capture, Storage, and Dissemination

NASA Technical Reports Server (NTRS)

Equils, Douglas J.

2011-01-01

This paper will discuss the drawbacks and risks of the current documentation paradigm, how Document QuickStart improves on that process and ultimately how this stream-lined approach will reduce risk and costs to the next generation of Flight Projects at JPL

Nutrition Education Needs Pantry Clients

ERIC Educational Resources Information Center

Wood, Dolores K.; Shultz, Jill Armstrong; Edlefsen, Miriam; Butkus, Sue N.

2007-01-01

Two food pantries were surveyed for nutrition education (NE) interests and experiences. One site provided nutrition education classes; the comparison site was utilized to assess client interest in class topics. "Fixing low cost meals," "fixing quick and easy recipes," and "stretching food and food dollars" were topics…

Application of ISO 9000 Standards to Education and Training.

ERIC Educational Resources Information Center

Van den Berghe, Wouter

1998-01-01

ISO 9000 certification has the advantages of a measurable framework for quality efforts, continuous improvement, and better customer service. Drawbacks for education and training providers include volume of paperwork, ongoing cost, risk of a growing bureaucracy, and the difficulty of making changes quickly. (SK)

Are Dead Chickens Ohmic?

ERIC Educational Resources Information Center

Kocijancic, Slavko; O'Sullivan, Colm

2004-01-01

Modern low-cost data acquisition systems enable pupils to study the voltage-current characteristics of a wide range of different materials and devices in a quick and convenient way. In particular, it is possible to study materials, such as meat and vegetables, not normally associated with school physics experiments.

A web-based rapid assessment tool for production publishing solutions

NASA Astrophysics Data System (ADS)

Sun, Tong

2010-02-01

Solution assessment is a critical first-step in understanding and measuring the business process efficiency enabled by an integrated solution package. However, assessing the effectiveness of any solution is usually a very expensive and timeconsuming task which involves lots of domain knowledge, collecting and understanding the specific customer operational context, defining validation scenarios and estimating the expected performance and operational cost. This paper presents an intelligent web-based tool that can rapidly assess any given solution package for production publishing workflows via a simulation engine and create a report for various estimated performance metrics (e.g. throughput, turnaround time, resource utilization) and operational cost. By integrating the digital publishing workflow ontology and an activity based costing model with a Petri-net based workflow simulation engine, this web-based tool allows users to quickly evaluate any potential digital publishing solutions side-by-side within their desired operational contexts, and provides a low-cost and rapid assessment for organizations before committing any purchase. This tool also benefits the solution providers to shorten the sales cycles, establishing a trustworthy customer relationship and supplement the professional assessment services with a proven quantitative simulation and estimation technology.

DNA Assembly in 3D Printed Fluidics

PubMed Central

Patrick, William G.; Nielsen, Alec A. K.; Keating, Steven J.; Levy, Taylor J.; Wang, Che-Wei; Rivera, Jaime J.; Mondragón-Palomino, Octavio; Carr, Peter A.; Voigt, Christopher A.; Oxman, Neri; Kong, David S.

2015-01-01

The process of connecting genetic parts—DNA assembly—is a foundational technology for synthetic biology. Microfluidics present an attractive solution for minimizing use of costly reagents, enabling multiplexed reactions, and automating protocols by integrating multiple protocol steps. However, microfluidics fabrication and operation can be expensive and requires expertise, limiting access to the technology. With advances in commodity digital fabrication tools, it is now possible to directly print fluidic devices and supporting hardware. 3D printed micro- and millifluidic devices are inexpensive, easy to make and quick to produce. We demonstrate Golden Gate DNA assembly in 3D-printed fluidics with reaction volumes as small as 490 nL, channel widths as fine as 220 microns, and per unit part costs ranging from $0.61 to $5.71. A 3D-printed syringe pump with an accompanying programmable software interface was designed and fabricated to operate the devices. Quick turnaround and inexpensive materials allowed for rapid exploration of device parameters, demonstrating a manufacturing paradigm for designing and fabricating hardware for synthetic biology. PMID:26716448

Trace Detection of RDX, HMX and PETN Explosives Using a Fluorescence Spot Sensor

PubMed Central

Wang, Chen; Huang, Helin; Bunes, Benjamin R.; Wu, Na; Xu, Miao; Yang, Xiaomei; Yu, Li; Zang, Ling

2016-01-01

1,3,5-trinitroperhydro-1,3,5-triazine (RDX), octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), and pentaerythritol tetranitrate (PETN), the major components in plastic explosives, pose a significant threat to public safety. A quick, sensitive, and low-cost detection method for these non-volatile explosives is eagerly demanded. Here we present a fluo-spot approach, which can be employed for in situ detection of trace amount of explosives. The sensor molecule is a charge-transfer fluorophore, DCM, which is strongly fluorescent in its pristine state, but non-fluorescent after the quick reaction with NO2· (or NO2+) generated from the UV photolysis of RDX, HMX (or PETN). When fabricated within silica gel TLC plate, the fluo-spot sensor features high sensitivity owing to the large surface area and porous structure of the substrate. The sensor reaction mechanism was verified by various experimental characterizations, including chromatography, UV-Vis absorption and fluorescence spectroscopy, MS and 1H NMR spectrometry. The fluo-spot also demonstrated high selectivity towards RDX, HMX and PETN, as no significant fluorescence quenching was observed for other chemical compounds including common nitro-aromatic explosives and inorganic oxidative compounds. The DCM sensor can also be used as an economical spray kit to directly spot the explosives by naked eyes, implying great potential for quick, low-cost trace explosives detection. PMID:27146290

Trace Detection of RDX, HMX and PETN Explosives Using a Fluorescence Spot Sensor.

PubMed

Wang, Chen; Huang, Helin; Bunes, Benjamin R; Wu, Na; Xu, Miao; Yang, Xiaomei; Yu, Li; Zang, Ling

2016-05-05

1,3,5-trinitroperhydro-1,3,5-triazine (RDX), octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), and pentaerythritol tetranitrate (PETN), the major components in plastic explosives, pose a significant threat to public safety. A quick, sensitive, and low-cost detection method for these non-volatile explosives is eagerly demanded. Here we present a fluo-spot approach, which can be employed for in situ detection of trace amount of explosives. The sensor molecule is a charge-transfer fluorophore, DCM, which is strongly fluorescent in its pristine state, but non-fluorescent after the quick reaction with NO2· (or NO2(+)) generated from the UV photolysis of RDX, HMX (or PETN). When fabricated within silica gel TLC plate, the fluo-spot sensor features high sensitivity owing to the large surface area and porous structure of the substrate. The sensor reaction mechanism was verified by various experimental characterizations, including chromatography, UV-Vis absorption and fluorescence spectroscopy, MS and (1)H NMR spectrometry. The fluo-spot also demonstrated high selectivity towards RDX, HMX and PETN, as no significant fluorescence quenching was observed for other chemical compounds including common nitro-aromatic explosives and inorganic oxidative compounds. The DCM sensor can also be used as an economical spray kit to directly spot the explosives by naked eyes, implying great potential for quick, low-cost trace explosives detection.

Social media and nutrition education: the food hero experience.

PubMed

Tobey, Lauren N; Manore, Melinda M

2014-01-01

Social media can be a quick, low-cost, direct way for nutrition educators to broaden the scope of their targeted programs. The authors' viewpoint is that for social media to be effective, strategies for its use should follow "best practices" guidelines. This viewpoint suggests social media best practices based on experience gained from the Food Hero social marketing campaign. Understanding of how nutrition educators can take advantage of social media as a new mechanism for reaching their target audience is needed, including best practices for implementation, management, and evaluation. Copyright © 2014 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

New perspectives and lessons learned in the identification of impurities in drug development.

PubMed

Sasaki, Ryan R; McGibbon, Graham; Lee, Mike S; Murray, Clare L; Pharr, Bruce

2014-11-01

Within the pharmaceutical industry, the rapid identification, elucidation and characterization of synthetic or process impurities or degradants form an intense and a comprehensive undertaking. Advances in laboratory hardware and software are changing the way in which scientists work together to help resolve impurities in a quick and efficient manner. Although the industry trend toward externalization and outsourcing of development tasks provides a cost-effective method, the demand for improved productivity in laboratory workflows in drug development continues to be a high priority. This brings a need for new approaches for communication, collaboration and data management. Copyright © 2014 Elsevier Ltd. All rights reserved.

Indentured Parts List Maintenance and Part Assembly Capture Tool - IMPACT

NASA Technical Reports Server (NTRS)

Jain, Bobby; Morris, Jill; Sharpe, Kelly

2004-01-01

Johnson Space Center's (JSC's) indentured parts list (IPL) maintenance and parts assembly capture tool (IMPACT) is an easy-to-use graphical interface for viewing and maintaining the complex assembly hierarchies of large databases. IMPACT, already in use at JSC to support the International Space Station (ISS), queries, updates, modifies, and views data in IPL and associated resource data, functions that it can also perform, with modification, for any large commercial database. By enabling its users to efficiently view and manipulate IPL hierarchical data, IMPACT performs a function unlike that of any other tool. Through IMPACT, users will achieve results quickly, efficiently, and cost effectively.

The MIDAS processor. [Multivariate Interactive Digital Analysis System for multispectral scanner data

NASA Technical Reports Server (NTRS)

Kriegler, F. J.; Gordon, M. F.; Mclaughlin, R. H.; Marshall, R. E.

1975-01-01

The MIDAS (Multivariate Interactive Digital Analysis System) processor is a high-speed processor designed to process multispectral scanner data (from Landsat, EOS, aircraft, etc.) quickly and cost-effectively to meet the requirements of users of remote sensor data, especially from very large areas. MIDAS consists of a fast multipipeline preprocessor and classifier, an interactive color display and color printer, and a medium scale computer system for analysis and control. The system is designed to process data having as many as 16 spectral bands per picture element at rates of 200,000 picture elements per second into as many as 17 classes using a maximum likelihood decision rule.

Transcriptome sequences resolve deep relationships of the grape family.

PubMed

Wen, Jun; Xiong, Zhiqiang; Nie, Ze-Long; Mao, Likai; Zhu, Yabing; Kan, Xian-Zhao; Ickert-Bond, Stefanie M; Gerrath, Jean; Zimmer, Elizabeth A; Fang, Xiao-Dong

2013-01-01

Previous phylogenetic studies of the grape family (Vitaceae) yielded poorly resolved deep relationships, thus impeding our understanding of the evolution of the family. Next-generation sequencing now offers access to protein coding sequences very easily, quickly and cost-effectively. To improve upon earlier work, we extracted 417 orthologous single-copy nuclear genes from the transcriptomes of 15 species of the Vitaceae, covering its phylogenetic diversity. The resulting transcriptome phylogeny provides robust support for the deep relationships, showing the phylogenetic utility of transcriptome data for plants over a time scale at least since the mid-Cretaceous. The pros and cons of transcriptome data for phylogenetic inference in plants are also evaluated.

Promotion effect of nickel loaded on CdS for photocatalytic H2 production in lactic acid solution

NASA Astrophysics Data System (ADS)

Chen, Shu; Chen, Xiaoping; Jiang, Qizhong; Yuan, Jian; Lin, Caifang; Shangguan, Wenfeng

2014-10-01

Low-cost Ni modified CdS was prepared via a hydrothermal reduction method. The hydrogen production activity of CdS loaded with 5 wt% Ni under visible light was even higher than that of the one loaded with 0.5 wt% Pt. The highest H2 evolution rate (3004.8 μmol h-1) occurred when the concentration of sacrificial agent (lactic acid) was 50 vol%. The nickel can quickly transfer excited electrons and enhance the photocatalytic H2 production activity. It was also found that the hydrogen evolution in this system was generated steadily from both water and lactic acid.

Privatization of Public Education: Panacea or Pandora's Box?

ERIC Educational Resources Information Center

Stevenson, Kenneth R.

1999-01-01

The drive for privatizing public education comes from two different movements: load-shedding and outsourcing. Districts hope to reduce perceived labor problems, avoid managing "uninteresting" services, save money, and/or buy quick-fix education reform. Privatization of charter schools is becoming big business, but its cost-effectiveness…

Fluid Power Multi-actuator Circuit Board with Microcomputer Control Option.

ERIC Educational Resources Information Center

McKechnie, R. E.; Vickers, G. W.

1981-01-01

Describes a portable fluid power engineering laboratory and class demonstration apparatus designed to enable students to design, build, and test multi-actuator circuits. Features a variety of standard pneumatic values and actuators fitted with quick disconnect couplings. Discusses sequencing circuit boards, microcomputer control, cost, and…

Organic crop production's top research priority: Pestiphytology

USDA-ARS?s Scientific Manuscript database

Pestiphytology is the study of pest plants, commonly referred to as weeds. In a recent national survey, weed research was designated as the top research priority by organic producers. Manual weed control is a costly practice that can quickly decrease return on investment, while the absence of weed...

Hybrid and Electric Advanced Vehicle Systems Simulation

NASA Technical Reports Server (NTRS)

Beach, R. F.; Hammond, R. A.; Mcgehee, R. K.

1985-01-01

Predefined components connected to represent wide variety of propulsion systems. Hybrid and Electric Advanced Vehicle System (HEAVY) computer program is flexible tool for evaluating performance and cost of electric and hybrid vehicle propulsion systems. Allows designer to quickly, conveniently, and economically predict performance of proposed drive train.

Copyboard Quickly Makes Clean Printing Plates

NASA Technical Reports Server (NTRS)

Balandis, W. D.

1985-01-01

Vacuum-chuck eliminates glass and sponge artwork support. Vacuum copyboard allows camera-ready original slid on top plate for proper positioning, then holds securely for photography. Bleed valve allows vacuum in copyboard box adjusted for small or large originals. With new copyboard, time-consuming and costly procedures unnecessary.

Tunnel Cost-Estimating Methods.

DTIC Science & Technology

1981-10-01

wears down the bit very quickly; stratified rock or mixed face results in uneven thrust and excessive bearing wear and can cause large rocks to jam ...of Reclamation (USBIJREC) Strawberry Aqueduct System, is approximately 3-1/4 miles long and 13 ft in diameter. It was moled through hard sandstone and

Accurate pointing of tungsten welding electrodes

NASA Technical Reports Server (NTRS)

Ziegelmeier, P.

1971-01-01

Thoriated-tungsten is pointed accurately and quickly by using sodium nitrite. Point produced is smooth and no effort is necessary to hold the tungsten rod concentric. The chemically produced point can be used several times longer than ground points. This method reduces time and cost of preparing tungsten electrodes.

Overview of TPS Tasks

NASA Technical Reports Server (NTRS)

Johnson, Sylvia M.

2000-01-01

The objectives of the project summarized in this viewgraph presentation are the following: (1) Develop a lightweight and low cost durable Thermal Protection System (TPS) for easy application to reusable launch vehicle payload launchers; (2) Develop quickly processed composite TPS processing and repair techniques; and (3) Develop higher temperature capability tile TPS. The benefits of this technology include reduced installation and operations cost, enhanced payload capability resulting from TPS weight reduction, and enhanced flight envelope and performance resulting from higher temperature capability TPS which can result in improved safety.

An engineering and economic evaluation of quick germ-quick fiber process for dry-grind ethanol facilities: analysis.

PubMed

Rodríguez, Luis F; Li, Changying; Khanna, Madhu; Spaulding, Aslihan D; Lin, Tao; Eckhoff, Steven R

2010-07-01

An engineering economic model, which is mass balanced and compositionally driven, was developed to compare the conventional corn dry-grind process and the pre-fractionation process called quick germ-quick fiber (QQ). In this model, documented in a companion article, the distillers dried grains with solubles (DDGS) price was linked with its protein and fiber content as well as with the long-term average relationship with the corn price. The detailed economic analysis showed that the QQ plant retrofitted from conventional dry-grind ethanol plant reduces the manufacturing cost of ethanol by 13.5 cent/gallon and has net present value of nearly $4 million greater than the conventional dry-grind plant at an interest rate of 4% in 15years. Ethanol and feedstock price sensitivity analysis showed that the QQ plant gains more profits when ethanol price increases than conventional dry-grind ethanol plant. An optimistic analysis of the QQ process suggests that the greater value of the modified DDGS would provide greater resistance to fluctuations in corn price for QQ facilities. This model can be used to provide decision support for ethanol producers. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

Orthorectification, mosaicking, and analysis of sub-decimeter resolution UAV imagery for rangeland monitoring

USDA-ARS?s Scientific Manuscript database

Unmanned aerial vehicles (UAVs) offer an attractive platform for acquiring imagery for rangeland monitoring. UAVs can be deployed quickly and repeatedly, and they can obtain sub-decimeter resolution imagery at lower image acquisition costs than with piloted aircraft. Low flying heights result in ima...

Air Structures. Educational Facilities Review Series Number 23.

ERIC Educational Resources Information Center

Finne, Mary Lou

Air structures can be erected quickly, cover large areas, cost substantially less than conventional buildings, and use less natural resources. Air structures are economically utilized for many facilities, such as athletic fields, swimming pools, high schools, day care centers, and college campuses. The literature on air structures covered in this…

Customer Service Programming

NASA Technical Reports Server (NTRS)

1982-01-01

Use of computer program STRCMACS has enabled Illinois Bell Telephone, a subsidiary of American Telephone and Telegraph to cut software development costs about 10 percent by reducing program maintenance and by allowing the department to bring other software into operation more quickly. It has also been useful in company training of programming staff.

Mobile Learning: Readiness and Perceptions of Teachers of Open Universities of Commonwealth Asia

ERIC Educational Resources Information Center

Miglani, Anshu; Awadhiya, Ashish Kumar

2017-01-01

Integration of "Mobile Learning" (m-learning) in Open and Distance Learning (ODL) systems can play a crucial role in reducing the "Digital Divide" and strengthening "Democratization of Education" by providing quality educational opportunities and access to information quickly at affordable cost in Commonwealth Asian…

Approaches to Enable Demand Response by Industrial Loads for Ancillary Services Provision

NASA Astrophysics Data System (ADS)

Zhang, Xiao

Demand response has gained significant attention in recent years as it demonstrates potentials to enhance the power system's operational flexibility in a cost-effective way. Industrial loads such as aluminum smelters, steel manufacturers, and cement plants demonstrate advantages in supporting power system operation through demand response programs, because of their intensive power consumption, already existing advanced monitoring and control infrastructure, and the strong economic incentive due to the high energy costs. In this thesis, we study approaches to efficiently integrate each of these types of manufacturing processes as demand response resources. The aluminum smelting process is able to change its power consumption both accurately and quickly by controlling the pots' DC voltage, without affecting the production quality. Hence, an aluminum smelter has both the motivation and the ability to participate in demand response. First, we focus on determining the optimal regulation capacity that such a manufacturing plant should provide. Next, we focus on determining its optimal bidding strategy in the day-ahead energy and ancillary services markets. Electric arc furnaces (EAFs) in steel manufacturing consume a large amount of electric energy. However, a steel plant can take advantage of time-based electricity prices by optimally arranging energy-consuming activities to avoid peak hours. We first propose scheduling methods that incorporate the EAFs' flexibilities to reduce the electricity cost. We then propose methods to make the computations more tractable. Finally, we extend the scheduling formulations to enable the provision of spinning reserve. Cement plants are able to quickly adjust their power consumption rate by switching on/off the crushers. However, switching on/off the loading units only achieves discrete power changes, which restricts the load from offering valuable ancillary services such as regulation and load following, as continuous power changes are required for these services. We propose methods that enable these services with the support of an on-site energy storage device. As demonstrated by the case studies, the proposed approaches are effective and can generate practical production instructions for the industrial loads. This thesis not only provides methods to enable demand response by industrial loads but also potentially encourages industrial loads to be active in electricity markets.

An Affordable Microsurgical Training System for a Beginning Neurosurgeon: How to Realize the Self-Training Laboratory.

PubMed

Chung, Sang-Bong; Ryu, Jiwook; Chung, Yeongu; Lee, Sung Ho; Choi, Seok Keun

2017-09-01

To provide detailed information about how to realize a self-training laboratory with cost-effective microsurgical instruments, especially pertinent for the novice trainee. Our training model is designed to allow the practice of the microsurgery skills in an efficient and cost-effective manner. A used stereoscopic microscope is prepared for microsurgical training. A sufficient working distance for microsurgical practice is obtained by attaching an auxiliary objective lens. The minimum instrument list includes 2 jeweler's forceps, iris scissors, and alligator clips. The iris scissors and alligator clip provide good alternatives to micro-scissors and microvascular clamp. The short time needed to set up the microscope and suture the gauze with micro-forceps makes the training model suitable for daily practice. It takes about 15 minutes to suture 10 neighboring fibers of the gauze with 10-0 nylon; thus, training can be completed more quickly. We have developed an inexpensive and efficient micro-anastomosis training system using a stereoscopic microscope and minimal micro-instruments. Especially useful for novice trainees, this system provides high accessibility for microsurgical training. Copyright © 2017 Elsevier Inc. All rights reserved.

NASA GRC Fatigue Crack Initiation Life Prediction Models

NASA Technical Reports Server (NTRS)

Arya, Vinod K.; Halford, Gary R.

2002-01-01

Metal fatigue has plagued structural components for centuries, and it remains a critical durability issue in today's aerospace hardware. This is true despite vastly improved and advanced materials, increased mechanistic understanding, and development of accurate structural analysis and advanced fatigue life prediction tools. Each advance is quickly taken advantage of to produce safer, more reliable, more cost effective, and better performing products. In other words, as the envelope is expanded, components are then designed to operate just as close to the newly expanded envelope as they were to the initial one. The problem is perennial. The economic importance of addressing structural durability issues early in the design process is emphasized. Tradeoffs with performance, cost, and legislated restrictions are pointed out. Several aspects of structural durability of advanced systems, advanced materials and advanced fatigue life prediction methods are presented. Specific items include the basic elements of durability analysis, conventional designs, barriers to be overcome for advanced systems, high-temperature life prediction for both creep-fatigue and thermomechanical fatigue, mean stress effects, multiaxial stress-strain states, and cumulative fatigue damage accumulation assessment.

A Primer In Advanced Fatigue Life Prediction Methods

NASA Technical Reports Server (NTRS)

Halford, Gary R.

2000-01-01

Metal fatigue has plagued structural components for centuries, and it remains a critical durability issue in today's aerospace hardware. This is true despite vastly improved and advanced materials, increased mechanistic understanding, and development of accurate structural analysis and advanced fatigue life prediction tools. Each advance is quickly taken advantage of to produce safer, more reliable more cost effective, and better performing products. In other words, as the envelop is expanded, components are then designed to operate just as close to the newly expanded envelop as they were to the initial one. The problem is perennial. The economic importance of addressing structural durability issues early in the design process is emphasized. Tradeoffs with performance, cost, and legislated restrictions are pointed out. Several aspects of structural durability of advanced systems, advanced materials and advanced fatigue life prediction methods are presented. Specific items include the basic elements of durability analysis, conventional designs, barriers to be overcome for advanced systems, high-temperature life prediction for both creep-fatigue and thermomechanical fatigue, mean stress effects, multiaxial stress-strain states, and cumulative fatigue damage accumulation assessment.

Chest pain emergency centers: improving acute myocardial infarction care.

PubMed

Ornato, J P

1999-08-01

Uncertainty and delay are common in the diagnosis of acute coronary syndromes (ACS). In the last 20 years, the need for faster, more accurate, and more cost-effective diagnosis gave rise to the concept of specialized treatment of patients with chest pain in emergency departments (EDs). The original strategy dedicated a separate section of the ED and a nursing staff to the task of rapid intervention in patients with acute myocardial infarction (MI) and triage of low-risk patients. Chest pain centers grew quickly in popularity but evolved with a variety of goals, staffing plans, diagnostic resources, and levels of commitment. There existing centers--the University of Cincinnati Heart ER, Brigham and Women's Hospital, and the Medical College of Virginia--have implemented chest pain strategies with the common aims of (1) screening for the entire spectrum of coronary artery disease, (2) avoiding unnecessary admissions, and (3) using multiple diagnostic modalities. Yet, they differ in the specifics of their approaches and diagnostic methods (e.g., echocardiography vs. treadmill vs. myocardial perfusion imaging). The safety and cost effectiveness of these centers are discussed.

PACS storage technology update: holographic storage.

PubMed

Colang, John E; Johnston, James N

2006-01-01

This paper focuses on the emerging technology of holographic storage and its effect on picture archiving and communication systems (PACS). A review of the emerging technology is presented, which includes a high level description of holographic drives and the associated substrate media, the laser and optical technology, and the spatial light modulator. The potential advantages and disadvantages of holographic drive and storage technology are evaluated. PACS administrators face myriad complex and expensive storage solutions and selecting an appropriate system is time-consuming and costly. Storage technology may become obsolete quickly because of the exponential nature of the advances in digital storage media. Holographic storage may turn out to be a low cost, high speed, high volume storage solution of the future; however, data is inconclusive at this early stage of the technology lifecycle. Despite the current lack of quantitative data to support the hypothesis that holographic technology will have a significant effect on PACS and standards of practice, it seems likely from the current information that holographic technology will generate significant efficiencies. This paper assumes the reader has a fundamental understanding of PACS technology.

NASA GRC Fatigue Crack Initiation Life Prediction Models

NASA Astrophysics Data System (ADS)

Arya, Vinod K.; Halford, Gary R.

2002-10-01

Metal fatigue has plagued structural components for centuries, and it remains a critical durability issue in today's aerospace hardware. This is true despite vastly improved and advanced materials, increased mechanistic understanding, and development of accurate structural analysis and advanced fatigue life prediction tools. Each advance is quickly taken advantage of to produce safer, more reliable, more cost effective, and better performing products. In other words, as the envelope is expanded, components are then designed to operate just as close to the newly expanded envelope as they were to the initial one. The problem is perennial. The economic importance of addressing structural durability issues early in the design process is emphasized. Tradeoffs with performance, cost, and legislated restrictions are pointed out. Several aspects of structural durability of advanced systems, advanced materials and advanced fatigue life prediction methods are presented. Specific items include the basic elements of durability analysis, conventional designs, barriers to be overcome for advanced systems, high-temperature life prediction for both creep-fatigue and thermomechanical fatigue, mean stress effects, multiaxial stress-strain states, and cumulative fatigue damage accumulation assessment.

The economics of new drugs: can we afford to make progress in a common disease?

PubMed

Hirsch, Bradford R; Schulman, Kevin A

2013-01-01

The concept of personalized medicine is beginning to come to fruition, but the cost of drug development is untenable today. To identify new initiatives that would support a more sustainable business model, the economics of drug development are analyzed, including the cost of drug development, cost of capital, target market size, returns to innovators at the product and firm levels, and, finally, product pricing. We argue that a quick fix is not available. Instead, a rethinking of the entire pharmaceutical development process is needed from the way that clinical trials are conducted, to the role of biomarkers in segmenting markets, to the use of grant support, and conditional approval to decrease the cost of capital. In aggregate, the opportunities abound.

After the revolution: DRGs at age 30.

PubMed

Quinn, Kevin

2014-03-18

1 October 2013 marked 30 years since Medicare began paying hospitals by diagnosis-related group (DRG), arguably the most influential innovation in the history of health care financing. Initially developed as a tool for hospital management, DRGs became the basis of the inpatient prospective payment system that Medicare implemented in 1983. The strong incentives were revolutionary in their impact. Medicare spending growth slowed sharply, and, more remarkable, hospitals posted record profits. After the link between cost and payment was broken, hospitals moved quickly to cut costs. Nevertheless, a literature survey concluded that none of the worst fears about adverse effects on patients were realized. Diagnosis-related groups have also come to define "the product of a hospital" for purposes of benchmarking and risk adjustment. The acceptance of DRG algorithms owes much to their categorical approach, clinical focus, and transparency. The 2 most commonly used algorithms, Medicare DRGs and All Patient Refined (APR) DRGs, typically explain more than 40% of cost variance in inpatient stays, although with considerable range by care category. Because Medicare DRGs are unsuitable for obstetrics, pediatrics, and neonatology, some payers prefer APR DRGs. Diagnosis-related groups have proven to be a suitable basis for payment, as evidenced by widespread use. Common issues include mitigation of adverse incentives, appropriate payment for extremely costly stays, applicability to certain hospitals and care categories, and growing complexity. The DRG experience offers lessons about the effectiveness of financial incentives, the likelihood of adverse effects, the usefulness of case-mix measures, the risks of growing complexity, and the example that sensible policy need not be the domain of any one political party or other entity.

World of intelligence defense object detection-machine learning (artificial intelligence)

NASA Astrophysics Data System (ADS)

Gupta, Anitya; Kumar, Akhilesh; Bhushan, Vinayak

2018-04-01

This paper proposes a Quick Locale based Convolutional System strategy (Quick R-CNN) for question recognition. Quick R-CNN expands on past work to effectively characterize ob-ject recommendations utilizing profound convolutional systems. Com-pared to past work, Quick R-CNN utilizes a few in-novations to enhance preparing and testing speed while likewise expanding identification precision. Quick R-CNN trains the profound VGG16 arrange 9 quicker than R-CNN, is 213 speedier at test-time, and accomplishes a higher Guide on PASCAL VOC 2012. Contrasted with SPPnet, Quick R-CNN trains VGG16 3 quicker, tests 10 speedier, and is more exact. Quick R-CNN is actualized in Python and C++ (utilizing Caffe) and is accessible under the open-source MIT Permit.

An Upgrade Pinning Block: A Mechanical Practical Aid for Fast Labelling of the Insect Specimens.

PubMed

Ghafouri Moghaddam, Mohammad Hossein; Ghafouri Moghaddam, Mostafa; Rakhshani, Ehsan; Mokhtari, Azizollah

2017-01-01

A new mechanical innovation is described to deal with standard labelling of dried specimens on triangular cards and/or pinned specimens in personal and public collections. It works quickly, precisely, and easily and is very useful for maintaining label uniformity in collections. The tools accurately sets the position of labels in the shortest possible time. This tools has advantages including rapid processing, cost effectiveness, light weight, and high accuracy, compared to conventional methods. It is fully customisable, compact, and does not require specialist equipment to assemble. Conventional methods generally require locating holes on the pinning block surface when labelling with a resulting risk to damage of the specimens. Insects of different orders can be labelled by this simple and effective tool.

An Upgrade Pinning Block: A Mechanical Practical Aid for Fast Labelling of the Insect Specimens

PubMed Central

Ghafouri Moghaddam, Mohammad Hossein; Rakhshani, Ehsan; Mokhtari, Azizollah

2017-01-01

Abstract A new mechanical innovation is described to deal with standard labelling of dried specimens on triangular cards and/or pinned specimens in personal and public collections. It works quickly, precisely, and easily and is very useful for maintaining label uniformity in collections. The tools accurately sets the position of labels in the shortest possible time. This tools has advantages including rapid processing, cost effectiveness, light weight, and high accuracy, compared to conventional methods. It is fully customisable, compact, and does not require specialist equipment to assemble. Conventional methods generally require locating holes on the pinning block surface when labelling with a resulting risk to damage of the specimens. Insects of different orders can be labelled by this simple and effective tool. PMID:29104440

Applications of Phase-Based Motion Processing

NASA Technical Reports Server (NTRS)

Branch, Nicholas A.; Stewart, Eric C.

2018-01-01

Image pyramids provide useful information in determining structural response at low cost using commercially available cameras. The current effort applies previous work on the complex steerable pyramid to analyze and identify imperceptible linear motions in video. Instead of implicitly computing motion spectra through phase analysis of the complex steerable pyramid and magnifying the associated motions, instead present a visual technique and the necessary software to display the phase changes of high frequency signals within video. The present technique quickly identifies regions of largest motion within a video with a single phase visualization and without the artifacts of motion magnification, but requires use of the computationally intensive Fourier transform. While Riesz pyramids present an alternative to the computationally intensive complex steerable pyramid for motion magnification, the Riesz formulation contains significant noise, and motion magnification still presents large amounts of data that cannot be quickly assessed by the human eye. Thus, user-friendly software is presented for quickly identifying structural response through optical flow and phase visualization in both Python and MATLAB.

Impact of Research and Development, Analysis, and Standardization on PV Project Financing Costs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feldman, David J; Margolis, Robert M; Jones-Albertus, Rebecca

The technical report discusses how R and D efforts focused on removing perceived risk from cash flows to investors have the potential to lower the cost of capital and increase the amount of leverage in a solar project. It also discusses how creating business efficiencies that allow financing transactions to occur more quickly with less effort can reduce the upfront costs associated with arranging financing for a solar project or group of projects. The paper then assesses the impact that these R and D activities might have on the volatility of PV asset cash flows and asset value, as wellmore » as the upfront costs of arranging a financial transaction. Finally, we insert these assumptions into financial models to analyze their impacts on the cost of capital for equity and debt investors, project leverage, and upfront financial transaction costs.« less

Costs and effects of two public sector delivery channels for long-lasting insecticidal nets in Uganda

PubMed Central

2010-01-01

Background In Uganda, long-lasting insecticidal nets (LLIN) have been predominantly delivered through two public sector channels: targeted campaigns or routine antenatal care (ANC) services. Their combination in a mixed-model strategy is being advocated to quickly increase LLIN coverage and maintain it over time, but there is little evidence on the efficiency of each system. This study evaluated the two delivery channels regarding LLIN retention and use, and estimated the associated costs, to contribute towards the evidence-base on LLIN delivery channels in Uganda. Methods Household surveys were conducted 5-7 months after LLIN distribution, combining questionnaires with visual verification of LLIN presence. Focus groups and interviews were conducted to further investigate determinants of LLIN retention and use. Campaign distribution was evaluated in Jinja and Adjumani while ANC distribution was evaluated only in the latter district. Costs were calculated from the provider perspective through retrospective analysis of expenditure data, and effects were estimated as cost per LLIN delivered and cost per treated-net-year (TNY). These effects were calculated for the total number of LLINs delivered and for those retained and used. Results After 5-7 months, over 90% of LLINs were still owned by recipients, and between 74% (Jinja) and 99% (ANC Adjumani) were being used. Costing results showed that delivery was cheapest for the campaign in Jinja and highest for the ANC channel, with economic delivery cost per net retained and used of USD 1.10 and USD 2.31, respectively. Financial delivery costs for the two channels were similar in the same location, USD 1.04 for campaign or USD 1.07 for ANC delivery in Adjumani, but differed between locations (USD 0.67 for campaign delivery in Jinja). Economic cost for ANC distribution were considerably higher (USD 2.27) compared to campaign costs (USD 1.23) in Adjumani. Conclusions Targeted campaigns and routine ANC services can both achieve high LLIN retention and use among the target population. The comparatively higher economic cost of delivery through ANC facilities was at least partially due to the relatively short time this system had been in existence. Further studies comparing the cost of well-established ANC delivery with LLIN campaigns and other delivery channels are thus encouraged. PMID:20406448

Costs and effects of two public sector delivery channels for long-lasting insecticidal nets in Uganda.

PubMed

Kolaczinski, Jan H; Kolaczinski, Kate; Kyabayinze, Daniel; Strachan, Daniel; Temperley, Matilda; Wijayanandana, Nayantara; Kilian, Albert

2010-04-20

In Uganda, long-lasting insecticidal nets (LLIN) have been predominantly delivered through two public sector channels: targeted campaigns or routine antenatal care (ANC) services. Their combination in a mixed-model strategy is being advocated to quickly increase LLIN coverage and maintain it over time, but there is little evidence on the efficiency of each system. This study evaluated the two delivery channels regarding LLIN retention and use, and estimated the associated costs, to contribute towards the evidence-base on LLIN delivery channels in Uganda. Household surveys were conducted 5-7 months after LLIN distribution, combining questionnaires with visual verification of LLIN presence. Focus groups and interviews were conducted to further investigate determinants of LLIN retention and use. Campaign distribution was evaluated in Jinja and Adjumani while ANC distribution was evaluated only in the latter district. Costs were calculated from the provider perspective through retrospective analysis of expenditure data, and effects were estimated as cost per LLIN delivered and cost per treated-net-year (TNY). These effects were calculated for the total number of LLINs delivered and for those retained and used. After 5-7 months, over 90% of LLINs were still owned by recipients, and between 74% (Jinja) and 99% (ANC Adjumani) were being used. Costing results showed that delivery was cheapest for the campaign in Jinja and highest for the ANC channel, with economic delivery cost per net retained and used of USD 1.10 and USD 2.31, respectively. Financial delivery costs for the two channels were similar in the same location, USD 1.04 for campaign or USD 1.07 for ANC delivery in Adjumani, but differed between locations (USD 0.67 for campaign delivery in Jinja). Economic cost for ANC distribution were considerably higher (USD 2.27) compared to campaign costs (USD 1.23) in Adjumani. Targeted campaigns and routine ANC services can both achieve high LLIN retention and use among the target population. The comparatively higher economic cost of delivery through ANC facilities was at least partially due to the relatively short time this system had been in existence. Further studies comparing the cost of well-established ANC delivery with LLIN campaigns and other delivery channels are thus encouraged.

Reducing Transaction Costs for Energy Efficiency Investments and Analysis of Economic Risk Associated With Building Performance Uncertainties: Small Buildings and Small Portfolios Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Langner, R.; Hendron, B.; Bonnema, E.

2014-08-01

The small buildings and small portfolios (SBSP) sector face a number of barriers that inhibit SBSP owners from adopting energy efficiency solutions. This pilot project focused on overcoming two of the largest barriers to financing energy efficiency in small buildings: disproportionately high transaction costs and unknown or unacceptable risk. Solutions to these barriers can often be at odds, because inexpensive turnkey solutions are often not sufficiently tailored to the unique circumstances of each building, reducing confidence that the expected energy savings will be achieved. To address these barriers, NREL worked with two innovative, forward-thinking lead partners, Michigan Saves and Energi,more » to develop technical solutions that provide a quick and easy process to encourage energy efficiency investments while managing risk. The pilot project was broken into two stages: the first stage focused on reducing transaction costs, and the second stage focused on reducing performance risk. In the first stage, NREL worked with the non-profit organization, Michigan Saves, to analyze the effects of 8 energy efficiency measures (EEMs) on 81 different baseline small office building models in Holland, Michigan (climate zone 5A). The results of this analysis (totaling over 30,000 cases) are summarized in a simple spreadsheet tool that enables users to easily sort through the results and find appropriate small office EEM packages that meet a particular energy savings threshold and are likely to be cost-effective.« less

Design of a Low-cost Oil Spill Tracking Buoy

NASA Astrophysics Data System (ADS)

Zhao, Y.; Hu, X.; Yu, F.; Dong, S.; Chen, G.

2017-12-01

As the rapid development of oil exploitation and transportation, oil spill accidents, such as Prestige oil spill, Gulf of Mexico oil spill accident and so on, happened frequently in recent years which would result in long-term damage to the environment and human life. It would be helpful for rescue operation if we can locate the oil slick diffusion area in real time. Equipped with GNSS system, current tracking buoys(CTB), such as Lagrangian drifting buoy, Surface Velocity Program (SVP) drifter, iSLDMB (Iridium self locating datum marker buoy) and Argosphere buoy, have been used as oil tracking buoy in oil slick observation and as validation tools for oil spill simulation. However, surface wind could affect the movement of oil slick, which couldn't be reflected by CTB, thus the oil spill tracking performance is limited. Here, we proposed an novel oil spill tracking buoy (OSTB) which has a low cost of less than $140 and is equipped with Beidou positioning module and sails to track oil slick. Based on hydrodynamic equilibrium model and ocean dynamic analysis, the wind sails and water sails are designed to be adjustable according to different marine conditions to improve tracking efficiency. Quick release device is designed to assure easy deployment from air or ship. Sea experiment was carried out in Jiaozhou Bay, Northern China. OSTB, SVP, iSLDMB, Argosphere buoy and a piece of oil-simulated rubber sheet were deployed at the same time. Meanwhile, oil spill simulation model GNOME (general NOAA operational modeling environment) was configured with the wind and current field, which were collected by an unmanned surface vehicle (USV) mounted with acoustic Doppler current profilers (ADCP) and wind speed and direction sensors. Experimental results show that the OSTB has better relevance with rubber sheet and GNOME simulation results, which validate the oil tracking ability of OSTB. With low cost and easy deployment, OSTB provides an effective way for oil spill numerical modeling validation and quick response to oil spill accidents.

CMOS array design automation techniques. [metal oxide semiconductors

NASA Technical Reports Server (NTRS)

Ramondetta, P.; Feller, A.; Noto, R.; Lombardi, T.

1975-01-01

A low cost, quick turnaround technique for generating custom metal oxide semiconductor arrays using the standard cell approach was developed, implemented, tested and validated. Basic cell design topology and guidelines are defined based on an extensive analysis that includes circuit, layout, process, array topology and required performance considerations particularly high circuit speed.

A train wreck on board the Titanic.

PubMed

Senak, M

1996-07-01

Combination therapy has created a paradox for people with HIV. Although the drugs, after being discovered at a fast pace, are manufactured quickly, they are not available to many persons because of the high cost. Future policy regulations must allow government subsidies to give persons drug therapy early in the course of the disease.

Galilean Tracks in the Physics Lab

ERIC Educational Resources Information Center

Hellman, Walter

2011-01-01

Variations of Galileo's famous track experiments in acceleration are commonly performed in high school and college. The purpose of this article is to present a sequence of three low-tech basic kinematics experiments using Galilean tracks that can be set up extremely quickly and yet generally yield excellent results. A low-cost construction method…

A Sports Franchise Simulation Game

ERIC Educational Resources Information Center

Surdam, David G.

2009-01-01

Students in sports economics courses might better learn the basic concepts by running their own franchise. A simple game, based on the card game War, is easy and inexpensive to implement. Students quickly grasp the importance of weighing marginal benefits, both in terms of team record and marginal revenue, against the costs of improving their…

When a School Burns, Cool Heads and Quick Action Keep Education on Track.

ERIC Educational Resources Information Center

Parry, Robert; Burris, Carol

1988-01-01

A fire destroyed an elementary school in the East Rockaway (New York) school system. A substitute facility, furniture, and textbooks were secured and classes opened, missing only four school days. Future precautions include insurance to cover actual reconstruction costs, smoke detectors, and a computerized inventory system. (MLF)

Bridging the Gap Between Large-scale Data Sets and Analyses: Semi-automated Methods to Facilitate Length Polymorphism Scoring and Data Analyses.

EPA Science Inventory

Amplified fragment length polymorphism (AFLP) markers can be developed more quickly and at a lower cost than microsatellite and single nucleotide polymorphism markers, which makes them ideal markers for large-scale studies of understudied taxa — such as species at risk. However,...

Inexpensive Tools To Quantify And Map Vegetative Cover For Large-Scale Research Or Management Decisions.

USDA-ARS?s Scientific Manuscript database

Vegetative cover can be quantified quickly and consistently and often at lower cost with image analysis of color digital images than with visual assessments. Image-based mapping of vegetative cover for large-scale research and management decisions can now be considered with the accuracy of these met...

Identifying Promising Items: The Use of Crowdsourcing in the Development of Assessment Instruments

ERIC Educational Resources Information Center

Sadler, Philip M.; Sonnert, Gerhard; Coyle, Harold P.; Miller, Kelly A.

2016-01-01

The psychometrically sound development of assessment instruments requires pilot testing of candidate items as a first step in gauging their quality, typically a time-consuming and costly effort. Crowdsourcing offers the opportunity for gathering data much more quickly and inexpensively than from most targeted populations. In a simulation of a…

Maximal Processing, or, Archivist on a Pale Horse

ERIC Educational Resources Information Center

Cox, Robert S.

2010-01-01

With the promise of greater economy in handling an ever-increasing volume of material, minimal processing has quickly become a new orthodoxy for the archival profession despite a raft of unintended consequences for service and discovery. Taking a long-term view of the costs and benefits entailed in the process of processing, the three-stage…

Design and Development of Low-Cost Water Tunnel for Educational Purpose

NASA Astrophysics Data System (ADS)

Zahari, M.; Dol, S. S.

2015-04-01

The hydrodynamic behaviour of immersed body is essential in fluid dynamics study. Water tunnel is an example of facility required to provide a controlled condition for fluid flow research. The operational principle of water tunnel is quite similar to the wind tunnel but with different working fluid and higher flow-pumping capacity. Flow visualization in wind tunnel is more difficult to conduct as turbulent flows in wind dissipate quickly whilst water tunnel is more suitable for such purpose due to higher fluid viscosity and wide variety of visualization techniques can be employed. The present work focusses on the design and development of open flow water tunnel for the purpose of studying vortex-induced vibration from turbulent vortex shedding phenomenon. The water tunnel is designed to provide a steady and uniform flow speed within the test section area. Construction details are discussed for development of low-cost water tunnel for quantitative and qualitative fluid flow measurements. The water tunnel can also be used for educational purpose such as fluid dynamics class activity to provide quick access to visualization medium for better understanding of various turbulence motion learnt in class.

Modeling and Simulation Reliable Spacecraft On-Board Computing

NASA Technical Reports Server (NTRS)

Park, Nohpill

1999-01-01

The proposed project will investigate modeling and simulation-driven testing and fault tolerance schemes for Spacecraft On-Board Computing, thereby achieving reliable spacecraft telecommunication. A spacecraft communication system has inherent capabilities of providing multipoint and broadcast transmission, connectivity between any two distant nodes within a wide-area coverage, quick network configuration /reconfiguration, rapid allocation of space segment capacity, and distance-insensitive cost. To realize the capabilities above mentioned, both the size and cost of the ground-station terminals have to be reduced by using reliable, high-throughput, fast and cost-effective on-board computing system which has been known to be a critical contributor to the overall performance of space mission deployment. Controlled vulnerability of mission data (measured in sensitivity), improved performance (measured in throughput and delay) and fault tolerance (measured in reliability) are some of the most important features of these systems. The system should be thoroughly tested and diagnosed before employing a fault tolerance into the system. Testing and fault tolerance strategies should be driven by accurate performance models (i.e. throughput, delay, reliability and sensitivity) to find an optimal solution in terms of reliability and cost. The modeling and simulation tools will be integrated with a system architecture module, a testing module and a module for fault tolerance all of which interacting through a centered graphical user interface.

Reducing Mission Costs by Leveraging Previous Investments in Space

NASA Technical Reports Server (NTRS)

Miller, Ron; Adams, W. James

1999-01-01

The Rapid Spacecraft Development Office (RSDO) at NASA's Goddard Space Flight Center has been charged with the responsibility to reduce mission cost by allowing access to previous developments on government and commercial space missions. RSDO accomplishes this responsibility by implementing two revolutionary contract vehicles, the Rapid Spacecraft Acquisition (RSA) and Quick Ride. This paper will describe the concept behind these contracts, the current capabilities available to missions, analysis of pricing trends to date using the RSDO processes, and future plans to increase flexibility and capabilities available to mission planners.

Frequency stabilization for mobile satellite terminals via LORAN

NASA Technical Reports Server (NTRS)

Ernst, Gregory J.; Kee, Steven M.; Marquart, Robert C.

1990-01-01

Digital satellite communication systems require careful management of frequency stability. Historically, frequency stability has been accomplished by continuously powered, high cost, high performance reference oscillators. Today's low cost mobile satellite communication equipment must operate under wide ranging environmental conditions, stabilize quickly after application of power, and provide adequate performance margin to overcome RF link impairments unique to the land mobile environment. Methods for frequency stabilization in land mobile applications must meet these objectives without incurring excessive performance degradation. A frequency stabilization scheme utilizing the LORAN (Long Range Navigation) system is presented.

Foldable and Disposable Memory on Paper

PubMed Central

Lee, Byung-Hyun; Lee, Dong-Il; Bae, Hagyoul; Seong, Hyejeong; Jeon, Seung-Bae; Seol, Myung-Lok; Han, Jin-Woo; Meyyappan, M.; Im, Sung-Gap; Choi, Yang-Kyu

2016-01-01

Foldable organic memory on cellulose nanofibril paper with bendable and rollable characteristics is demonstrated by employing initiated chemical vapor deposition (iCVD) for polymerization of the resistive switching layer and inkjet printing of the electrode, where iCVD based on all-dry and room temperature process is very suitable for paper electronics. This memory exhibits a low operation voltage of 1.5 V enabling battery operation compared to previous reports and wide memory window. The memory performance is maintained after folding tests, showing high endurance. Furthermore, the quick and complete disposable nature demonstrated here is attractive for security applications. This work provides an effective platform for green, foldable and disposable electronics based on low cost and versatile materials. PMID:27922094

Remediation potential of mulch for removing lead.

PubMed

Jang, A; Bishop, P L

2012-01-01

Hardwood bark mulch has good physicochemical properties for the adsorption of lead (Pb(II)). Batch tests were conducted to obtain the sorption coefficient of Pb(II) in mulch. The results of the Freundlich model were not in as good agreement as for the case of the Langmuir model. In addition, a laboratory-scale mulch permeable reactive barrier (PRB) system was designed for the treatment of Pb(II)-contaminated groundwater. The mulch PRB system, using a mulch layer, can potentially be used in the subsurface for cost-effective and in situ transformation of the Pb(II) into environmentally acceptable forms. From the Pb(II) breakthrough curve, the mulch becomes saturated more quickly at higher flow rates.

Flexible implementation of front-end bioelectric signal amplifier using FPAA for telemedicine system.

PubMed

Chan, U Fai; Chan, Wai Wong; Pun, Sio Hang; Vai, Mang I; Mak, Peng Un

2007-01-01

Traditional/Current electronic circuits for Telemedicine have significant performance on certain bioelectric signal detection. However, it is rarely seen that can handle multiple signals without changing of hardware. This paper introduces a general front-end amplifier for various bioelectric signals based on Field Programmable Analogy Array (FPAA) Technology. Employing FPAA technology, the implemented amplifier can be adapted for various bioelectric signals without alternating the circuitry while its compact size (core parts < 2 cm2) provides an alternative solution for miniaturized Telemedicine system and Wearable Devices. The proposed design implementation has demonstrated, through successfully ECG and EMG signal extractions, a quick way to miniaturize analog biomedical circuit in a convenient and cost effective way.

Quantum metropolitan optical network based on wavelength division multiplexing.

PubMed

Ciurana, A; Martínez-Mateo, J; Peev, M; Poppe, A; Walenta, N; Zbinden, H; Martín, V

2014-01-27

Quantum Key Distribution (QKD) is maturing quickly. However, the current approaches to its application in optical networks make it an expensive technology. QKD networks deployed to date are designed as a collection of point-to-point, dedicated QKD links where non-neighboring nodes communicate using the trusted repeater paradigm. We propose a novel optical network model in which QKD systems share the communication infrastructure by wavelength multiplexing their quantum and classical signals. The routing is done using optical components within a metropolitan area which allows for a dynamically any-to-any communication scheme. Moreover, it resembles a commercial telecom network, takes advantage of existing infrastructure and utilizes commercial components, allowing for an easy, cost-effective and reliable deployment.

Probabilistic Analysis of Solid Oxide Fuel Cell Based Hybrid Gas Turbine System

NASA Technical Reports Server (NTRS)

Gorla, Rama S. R.; Pai, Shantaram S.; Rusick, Jeffrey J.

2003-01-01

The emergence of fuel cell systems and hybrid fuel cell systems requires the evolution of analysis strategies for evaluating thermodynamic performance. A gas turbine thermodynamic cycle integrated with a fuel cell was computationally simulated and probabilistically evaluated in view of the several uncertainties in the thermodynamic performance parameters. Cumulative distribution functions and sensitivity factors were computed for the overall thermal efficiency and net specific power output due to the uncertainties in the thermodynamic random variables. These results can be used to quickly identify the most critical design variables in order to optimize the design and make it cost effective. The analysis leads to the selection of criteria for gas turbine performance.

Positional Accuracy of Airborne Integrated Global Positioning and Inertial Navigation Systems for Mapping in Glen Canyon, Arizona

USGS Publications Warehouse

Sanchez, Richard D.; Hothem, Larry D.

2002-01-01

High-resolution airborne and satellite image sensor systems integrated with onboard data collection based on the Global Positioning System (GPS) and inertial navigation systems (INS) may offer a quick and cost-effective way to gather accurate topographic map information without ground control or aerial triangulation. The Applanix Corporation?s Position and Orientation Solutions for Direct Georeferencing of aerial photography was used in this project to examine the positional accuracy of integrated GPS/INS for terrain mapping in Glen Canyon, Arizona. The research application in this study yielded important information on the usefulness and limits of airborne integrated GPS/INS data-capture systems for mapping.

Science in space with the Space Station

NASA Technical Reports Server (NTRS)

Banks, Peter M.

1987-01-01

The potential of the Space Station as a versatile scientific laboratory is discussed, reviewing plans under consideration by the NASA Task Force on Scientific Uses of the Space Station. The special advantages offered by the Station for expanding the scope of 'space science' beyond astrophysics, geophysics, and terrestrial remote sensing are stressed. Topics examined include the advantages of a manned presence, the scientific value and cost effectiveness of smaller, more quickly performable experiments, improved communications for ground control of Station experiments, the international nature of the Station, the need for more scientist astronauts for the Station crew, Station on-orbit maintenance and repair services for coorbiting platforms, and the need for Shuttle testing of proposed Station laboratory equipment and procedures.

RapGene: a fast and accurate strategy for synthetic gene assembly in Escherichia coli

PubMed Central

Zampini, Massimiliano; Stevens, Pauline Rees; Pachebat, Justin A.; Kingston-Smith, Alison; Mur, Luis A. J.; Hayes, Finbarr

2015-01-01

The ability to assemble DNA sequences de novo through efficient and powerful DNA fabrication methods is one of the foundational technologies of synthetic biology. Gene synthesis, in particular, has been considered the main driver for the emergence of this new scientific discipline. Here we describe RapGene, a rapid gene assembly technique which was successfully tested for the synthesis and cloning of both prokaryotic and eukaryotic genes through a ligation independent approach. The method developed in this study is a complete bacterial gene synthesis platform for the quick, accurate and cost effective fabrication and cloning of gene-length sequences that employ the widely used host Escherichia coli. PMID:26062748

Transcriptome Sequences Resolve Deep Relationships of the Grape Family

PubMed Central

Wen, Jun; Xiong, Zhiqiang; Nie, Ze-Long; Mao, Likai; Zhu, Yabing; Kan, Xian-Zhao; Ickert-Bond, Stefanie M.; Gerrath, Jean; Zimmer, Elizabeth A.; Fang, Xiao-Dong

2013-01-01

Previous phylogenetic studies of the grape family (Vitaceae) yielded poorly resolved deep relationships, thus impeding our understanding of the evolution of the family. Next-generation sequencing now offers access to protein coding sequences very easily, quickly and cost-effectively. To improve upon earlier work, we extracted 417 orthologous single-copy nuclear genes from the transcriptomes of 15 species of the Vitaceae, covering its phylogenetic diversity. The resulting transcriptome phylogeny provides robust support for the deep relationships, showing the phylogenetic utility of transcriptome data for plants over a time scale at least since the mid-Cretaceous. The pros and cons of transcriptome data for phylogenetic inference in plants are also evaluated. PMID:24069307

Conservation strategies for orangutans: reintroduction versus habitat preservation and the benefits of sustainably logged forest.

PubMed

Wilson, Howard B; Meijaard, Erik; Venter, Oscar; Ancrenaz, Marc; Possingham, Hugh P

2014-01-01

The Sumatran orangutan is currently listed by the IUCN as critically endangered and the Bornean species as endangered. Unless effective conservation measures are enacted quickly, most orangutan populations without adequate protection face a dire future. Two main strategies are being pursued to conserve orangutans: (i) rehabilitation and reintroduction of ex-captive or displaced individuals; and (ii) protection of their forest habitat to abate threats like deforestation and hunting. These strategies are often mirrored in similar programs to save other valued and endangered mega-fauna. Through GIS analysis, collating data from across the literature, and combining this information within a modelling and decision analysis framework, we analysed which strategy or combination of strategies is the most cost-effective at maintaining wild orangutan populations, and under what conditions. We discovered that neither strategy was optimal under all circumstances but was dependent on the relative cost per orangutan, the timescale of management concern, and the rate of deforestation. Reintroduction, which costs twelve times as much per animal as compared to protection of forest, was only a cost-effective strategy at very short timescales. For time scales longer than 10-20 years, forest protection is the more cost-efficient strategy for maintaining wild orangutan populations. Our analyses showed that a third, rarely utilised strategy is intermediate: introducing sustainable logging practices and protection from hunting in timber production forest. Maximum long-term cost-efficiency is achieved by working in conservation forest. However, habitat protection involves addressing complex conservation issues and conflicting needs at the landscape level. We find a potential resolution in that well-managed production forests could achieve intermediate conservation outcomes. This has broad implications for sustaining biodiversity more generally within an economically productive landscape. Insights from this analysis should provide a better framework to prioritize financial investments, and facilitate improved integration between the organizations that implement these strategies.

Conservation Strategies for Orangutans: Reintroduction versus Habitat Preservation and the Benefits of Sustainably Logged Forest

PubMed Central

Wilson, Howard B.; Meijaard, Erik; Venter, Oscar; Ancrenaz, Marc; Possingham, Hugh P.

2014-01-01

The Sumatran orangutan is currently listed by the IUCN as critically endangered and the Bornean species as endangered. Unless effective conservation measures are enacted quickly, most orangutan populations without adequate protection face a dire future. Two main strategies are being pursued to conserve orangutans: (i) rehabilitation and reintroduction of ex-captive or displaced individuals; and (ii) protection of their forest habitat to abate threats like deforestation and hunting. These strategies are often mirrored in similar programs to save other valued and endangered mega-fauna. Through GIS analysis, collating data from across the literature, and combining this information within a modelling and decision analysis framework, we analysed which strategy or combination of strategies is the most cost-effective at maintaining wild orangutan populations, and under what conditions. We discovered that neither strategy was optimal under all circumstances but was dependent on the relative cost per orangutan, the timescale of management concern, and the rate of deforestation. Reintroduction, which costs twelve times as much per animal as compared to protection of forest, was only a cost-effective strategy at very short timescales. For time scales longer than 10–20 years, forest protection is the more cost-efficient strategy for maintaining wild orangutan populations. Our analyses showed that a third, rarely utilised strategy is intermediate: introducing sustainable logging practices and protection from hunting in timber production forest. Maximum long-term cost-efficiency is achieved by working in conservation forest. However, habitat protection involves addressing complex conservation issues and conflicting needs at the landscape level. We find a potential resolution in that well-managed production forests could achieve intermediate conservation outcomes. This has broad implications for sustaining biodiversity more generally within an economically productive landscape. Insights from this analysis should provide a better framework to prioritize financial investments, and facilitate improved integration between the organizations that implement these strategies. PMID:25025134

Are wildlife detector dogs or people better at finding Desert Tortoises (Gopherus agassizii)?

USGS Publications Warehouse

Nussear, K.E.; Esque, T.C.; Heaton, J.S.; Cablk, Mary E.; Drake, K.K.; Valentin, C.; Yee, J.L.; Medica, P.A.

2008-01-01

Our ability to study threatened and endangered species depends on locating them readily in the field. Recent studies highlight the effectiveness of trained detector dogs to locate wildlife during field surveys, including Desert Tortoises in a semi-natural setting. Desert Tortoises (Gopherus agassizii) are cryptic and difficult to detect during surveys, especially the smaller size classes. We conducted comparative surveys to determine whether human or detector dog teams were more effective at locating Desert Tortoises in the wild. We compared detectability of Desert Tortoises and the costs to deploy human and dog search teams. Detectability of tortoises was not statistically different for either team, and was estimated to be approximately 70% (SE = 5%). Dogs found a greater proportion of tortoises located in vegetation than did humans. The dog teams finished surveys 2.5 hours faster than the humans on average each day. The human team cost was approximately $3,000 less per square kilometer sampled. Dog teams provided a quick and effective method for surveying for adult Desert Tortoises; however, we were unable to determine-their effectiveness at locating smaller size classes. Detection of smaller size classes during surveys would improve management of the species and should be addressed by future research using Desert Tortoise detector dogs.

Assessing the Utility of Uav-Borne Hyperspectral Image and Photogrammetry Derived 3d Data for Wetland Species Distribution Quick Mapping

NASA Astrophysics Data System (ADS)

Li, Q. S.; Wong, F. K. K.; Fung, T.

2017-08-01

Lightweight unmanned aerial vehicle (UAV) loaded with novel sensors offers a low cost and minimum risk solution for data acquisition in complex environment. This study assessed the performance of UAV-based hyperspectral image and digital surface model (DSM) derived from photogrammetric point clouds for 13 species classification in wetland area of Hong Kong. Multiple feature reduction methods and different classifiers were compared. The best result was obtained when transformed components from minimum noise fraction (MNF) and DSM were combined in support vector machine (SVM) classifier. Wavelength regions at chlorophyll absorption green peak, red, red edge and Oxygen absorption at near infrared were identified for better species discrimination. In addition, input of DSM data reduces overestimation of low plant species and misclassification due to the shadow effect and inter-species morphological variation. This study establishes a framework for quick survey and update on wetland environment using UAV system. The findings indicate that the utility of UAV-borne hyperspectral and derived tree height information provides a solid foundation for further researches such as biological invasion monitoring and bio-parameters modelling in wetland.

An Ontology-Based, Mobile-Optimized System for Pharmacogenomic Decision Support at the Point-of-Care

PubMed Central

Miñarro-Giménez, Jose Antonio; Blagec, Kathrin; Boyce, Richard D.; Adlassnig, Klaus-Peter; Samwald, Matthias

2014-01-01

Background The development of genotyping and genetic sequencing techniques and their evolution towards low costs and quick turnaround have encouraged a wide range of applications. One of the most promising applications is pharmacogenomics, where genetic profiles are used to predict the most suitable drugs and drug dosages for the individual patient. This approach aims to ensure appropriate medical treatment and avoid, or properly manage, undesired side effects. Results We developed the Medicine Safety Code (MSC) service, a novel pharmacogenomics decision support system, to provide physicians and patients with the ability to represent pharmacogenomic data in computable form and to provide pharmacogenomic guidance at the point-of-care. Pharmacogenomic data of individual patients are encoded as Quick Response (QR) codes and can be decoded and interpreted with common mobile devices without requiring a centralized repository for storing genetic patient data. In this paper, we present the first fully functional release of this system and describe its architecture, which utilizes Web Ontology Language 2 (OWL 2) ontologies to formalize pharmacogenomic knowledge and to provide clinical decision support functionalities. Conclusions The MSC system provides a novel approach for enabling the implementation of personalized medicine in clinical routine. PMID:24787444

An ontology-based, mobile-optimized system for pharmacogenomic decision support at the point-of-care.

PubMed

Miñarro-Giménez, Jose Antonio; Blagec, Kathrin; Boyce, Richard D; Adlassnig, Klaus-Peter; Samwald, Matthias

2014-01-01

The development of genotyping and genetic sequencing techniques and their evolution towards low costs and quick turnaround have encouraged a wide range of applications. One of the most promising applications is pharmacogenomics, where genetic profiles are used to predict the most suitable drugs and drug dosages for the individual patient. This approach aims to ensure appropriate medical treatment and avoid, or properly manage, undesired side effects. We developed the Medicine Safety Code (MSC) service, a novel pharmacogenomics decision support system, to provide physicians and patients with the ability to represent pharmacogenomic data in computable form and to provide pharmacogenomic guidance at the point-of-care. Pharmacogenomic data of individual patients are encoded as Quick Response (QR) codes and can be decoded and interpreted with common mobile devices without requiring a centralized repository for storing genetic patient data. In this paper, we present the first fully functional release of this system and describe its architecture, which utilizes Web Ontology Language 2 (OWL 2) ontologies to formalize pharmacogenomic knowledge and to provide clinical decision support functionalities. The MSC system provides a novel approach for enabling the implementation of personalized medicine in clinical routine.

Direct cost comparison of minimally invasive punch technique versus traditional approaches for percutaneous bone anchored hearing devices.

PubMed

Sardiwalla, Yaeesh; Jufas, Nicholas; Morris, David P

2017-06-12

Minimally Invasive Ponto Surgery (MIPS) was recently described as a new technique to facilitate the placement of percutaneous bone anchored hearing devices. The procedure has resulted in a simplification of the surgical steps and a dramatic reduction in surgical time while maintaining excellent patient outcomes. Given these developments, our group sought to move the procedure from the main operating suite where they have traditionally been performed. This study aims to test the null hypothesis that MIPS and open approaches have the same direct costs for the implantation of percutaneous bone anchored hearing devices in a Canadian public hospital setting. A retrospective direct cost comparison of MIPS and open approaches for the implantation of bone conduction implants was conducted. Indirect and future costs were not included in the fiscal analysis. A simple cost comparison of the two approaches was made considering time, staff and equipment needs. All 12 operations were performed on adult patients from 2013 to 2016 by the same surgeon at a single hospital site. MIPS has a total mean reduction in cost of CAD$456.83 per operation from the hospital perspective when compared to open approaches. The average duration of the MIPS operation was 7 min, which is on average 61 min shorter compared with open approaches. The MIPS technique was more cost effective than traditional open approaches. This primarily reflects a direct consequence of a reduction in surgical time, with further contributions from reduced staffing and equipment costs. This simple, quick intervention proved to be feasible when performed outside the main operating room. A blister pack of required equipment could prove convenient and further reduce costs.

GIS Based System for Post-Earthquake Crisis Managment Using Cellular Network

NASA Astrophysics Data System (ADS)

Raeesi, M.; Sadeghi-Niaraki, A.

2013-09-01

Earthquakes are among the most destructive natural disasters. Earthquakes happen mainly near the edges of tectonic plates, but they may happen just about anywhere. Earthquakes cannot be predicted. Quick response after disasters, like earthquake, decreases loss of life and costs. Massive earthquakes often cause structures to collapse, trapping victims under dense rubble for long periods of time. After the earthquake and destroyed some areas, several teams are sent to find the location of the destroyed areas. The search and rescue phase usually is maintained for many days. Time reduction for surviving people is very important. A Geographical Information System (GIS) can be used for decreasing response time and management in critical situations. Position estimation in short period of time time is important. This paper proposes a GIS based system for post-earthquake disaster management solution. This system relies on several mobile positioning methods such as cell-ID and TA method, signal strength method, angel of arrival method, time of arrival method and time difference of arrival method. For quick positioning, the system can be helped by any person who has a mobile device. After positioning and specifying the critical points, the points are sent to a central site for managing the procedure of quick response for helping. This solution establishes a quick way to manage the post-earthquake crisis.

Low-cost and low maintenance preservation of Agaricus brasiliensis cultures.

PubMed

Maia, Scheila C; Toledo, Rômulo C C; Almeida, Ana Paula M M; da Silva, Romildo; Rinker, Danny Lee; Dias, Eustáquio S

2012-06-01

Agaricus brasiliensis cultures quickly lose viability when stored at cool temperatures, even for a short period of time. We evaluated several low-cost preservation methods using varied substrates, preservation solutions, and storage temperatures. Agaricus brasiliensis was intolerant to freezing temperatures, making liquid nitrogen use and deep-freezing methods impossible for its preservation. The best preservation conditions for the A. brasiliensis CS1 strain tested in this study were obtained by using rice as substrate and water as preservation solution, with storage at room temperature or when using soil, mushroom cultivation compost, or rice and stored at 10 °C without preservation solution. Those cultures that were reactivated showed the same productivity attributes as the control. In addition, no effect on productivity or biological efficiency was observed through successive subculturing of the strain (CS1). Parboiled rice was successfully used for other A. brasiliensis strains (CS2, CS5, CS7, CS9, and CS10), and also for Pleurotus ostreatus, P. sajor-caju, and Lentinula edodes.

An interactive computer approach to performing resource analysis for a multi-resource/multi-project problem. [Spacelab inventory procurement planning

NASA Technical Reports Server (NTRS)

Schlagheck, R. A.

1977-01-01

New planning techniques and supporting computer tools are needed for the optimization of resources and costs for space transportation and payload systems. Heavy emphasis on cost effective utilization of resources has caused NASA program planners to look at the impact of various independent variables that affect procurement buying. A description is presented of a category of resource planning which deals with Spacelab inventory procurement analysis. Spacelab is a joint payload project between NASA and the European Space Agency and will be flown aboard the Space Shuttle starting in 1980. In order to respond rapidly to the various procurement planning exercises, a system was built that could perform resource analysis in a quick and efficient manner. This system is known as the Interactive Resource Utilization Program (IRUP). Attention is given to aspects of problem definition, an IRUP system description, questions of data base entry, the approach used for project scheduling, and problems of resource allocation.

Printable CIGS thin film solar cells

NASA Astrophysics Data System (ADS)

Fan, Xiaojuan

2014-03-01

Among the various thin film solar cells in the market, CuInGaSe thin film cells have been considered as the most promising alternatives to silicon solar cells because of their high photo-electricity efficiency, reliability, and stability. However, many fabrication of CIGS thin film are based on vacuum processes such as evaporation sputtering techniques which are not cost efficient. This work develops a method using paste or ink liquid spin-coated on glass that would be to conventional ways in terms of cost effective, non-vacuum needed, quick processing. A mixture precursor was prepared by dissolving appropriate amounts of chemicals. After the mixture solution was cooled, a viscous paste prepared and ready for spin-coating process. A slight bluish CIG thin film substrate was then put in a tube furnace with evaporation of metal Se by depositing CdS layer and ZnO nanoparticle thin film coating to a solar cell fabrication. Structure, absorption spectrum, and photo-conversion efficiency for the as-grown CIGS thin film solar cell under study.

Contingency Contractor Optimization Phase 3 Sustainment Software Design Document - Contingency Contractor Optimization Tool - Prototype

DOE Office of Scientific and Technical Information (OSTI.GOV)

Durfee, Justin David; Frazier, Christopher Rawls; Bandlow, Alisa

This document describes the final software design of the Contingency Contractor Optimization Tool - Prototype. Its purpose is to provide the overall architecture of the software and the logic behind this architecture. Documentation for the individual classes is provided in the application Javadoc. The Contingency Contractor Optimization project is intended to address Department of Defense mandates by delivering a centralized strategic planning tool that allows senior decision makers to quickly and accurately assess the impacts, risks, and mitigation strategies associated with utilizing contract support. The Contingency Contractor Optimization Tool - Prototype was developed in Phase 3 of the OSD ATLmore » Contingency Contractor Optimization project to support strategic planning for contingency contractors. The planning tool uses a model to optimize the Total Force mix by minimizing the combined total costs for selected mission scenarios. The model optimizes the match of personnel types (military, DoD civilian, and contractors) and capabilities to meet mission requirements as effectively as possible, based on risk, cost, and other requirements.« less

Hospital diversification: corporate restructuring as a survival strategy.

PubMed

Snook, I D

1987-05-01

Corporate restructuring of hospitals as a strategy for survival and continued success is described. Health-care providers' traditional orientation has been toward service and mission; now, profits and new markets in health care must be considered also. To remain competitive, hospitals must be prepared to act rapidly on opportunities. Corporate reorganization, the creation of new corporate entities that perform diversified medical and nonmedical functions, may provide the flexibility needed for quick action. Legal and accounting costs will be incurred by corporate reorganization. Tax issues, staff morale, community support, and effect on hospital managers and board members should be considered. Hospitals can cut costs through vertical integration of existing services; in this system-building strategy, new services can be added to broaden the patient base. Corporate reorganization is more important for diversification--the extension of a hospital's medical and health businesses--than for system building. Guidelines for diversification are offered. Corporate reorganization is a technique that should be considered in an institution's planning process.

Molecular pathway activation - new type of biomarkers for tumor morphology and personalized selection of target drugs.

PubMed

Buzdin, Anton; Sorokin, Maxim; Garazha, Andrew; Sekacheva, Marina; Kim, Ella; Zhukov, Nikolay; Wang, Ye; Li, Xinmin; Kar, Souvik; Hartmann, Christian; Samii, Amir; Giese, Alf; Borisov, Nicolas

2018-06-20

Anticancer target drugs (ATDs) specifically bind and inhibit molecular targets that play important roles in cancer development and progression, being deeply implicated in intracellular signaling pathways. To date, hundreds of different ATDs were approved for clinical use in the different countries. Compared to previous chemotherapy treatments, ATDs often demonstrate reduced side effects and increased efficiency, but also have higher costs. However, the efficiency of ATDs for the advanced stage tumors is still insufficient. Different ATDs have different mechanisms of action and are effective in different cohorts of patients. Personalized approaches are therefore needed to select the best ATD candidates for the individual patients. In this review, we focus on a new generation of biomarkers - molecular pathway activation - and on their applications for predicting individual tumor response to ATDs. The success in high throughput gene expression profiling and emergence of novel bioinformatic tools reinforced quick development of pathway related field of molecular biomedicine. The ability to quantitatively measure degree of a pathway activation using gene expression data has revolutionized this field and made the corresponding analysis quick, robust and inexpensive. This success was further enhanced by using machine learning algorithms for selection of the best biomarkers. We review here the current progress in translating these studies to clinical oncology and patient-oriented adjustment of cancer therapy. Copyright © 2018. Published by Elsevier Ltd.

Population Health Impact and Cost-Effectiveness of Tuberculosis Diagnosis with Xpert MTB/RIF: A Dynamic Simulation and Economic Evaluation

PubMed Central

Menzies, Nicolas A.; Cohen, Ted; Lin, Hsien-Ho; Murray, Megan; Salomon, Joshua A.

2012-01-01

Background The Xpert MTB/RIF test enables rapid detection of tuberculosis (TB) and rifampicin resistance. The World Health Organization recommends Xpert for initial diagnosis in individuals suspected of having multidrug-resistant TB (MDR-TB) or HIV-associated TB, and many countries are moving quickly toward adopting Xpert. As roll-out proceeds, it is essential to understand the potential health impact and cost-effectiveness of diagnostic strategies based on Xpert. Methods and Findings We evaluated potential health and economic consequences of implementing Xpert in five southern African countries—Botswana, Lesotho, Namibia, South Africa, and Swaziland—where drug resistance and TB-HIV coinfection are prevalent. Using a calibrated, dynamic mathematical model, we compared the status quo diagnostic algorithm, emphasizing sputum smear, against an algorithm incorporating Xpert for initial diagnosis. Results were projected over 10- and 20-y time periods starting from 2012. Compared to status quo, implementation of Xpert would avert 132,000 (95% CI: 55,000–284,000) TB cases and 182,000 (97,000–302,000) TB deaths in southern Africa over the 10 y following introduction, and would reduce prevalence by 28% (14%–40%) by 2022, with more modest reductions in incidence. Health system costs are projected to increase substantially with Xpert, by US$460 million (294–699 million) over 10 y. Antiretroviral therapy for HIV represents a substantial fraction of these additional costs, because of improved survival in TB/HIV-infected populations through better TB case-finding and treatment. Costs for treating MDR-TB are also expected to rise significantly with Xpert scale-up. Relative to status quo, Xpert has an estimated cost-effectiveness of US$959 (633–1,485) per disability-adjusted life-year averted over 10 y. Across countries, cost-effectiveness ratios ranged from US$792 (482–1,785) in Swaziland to US$1,257 (767–2,276) in Botswana. Assessing outcomes over a 10-y period focuses on the near-term consequences of Xpert adoption, but the cost-effectiveness results are conservative, with cost-effectiveness ratios assessed over a 20-y time horizon approximately 20% lower than the 10-y values. Conclusions Introduction of Xpert could substantially change TB morbidity and mortality through improved case-finding and treatment, with more limited impact on long-term transmission dynamics. Despite extant uncertainty about TB natural history and intervention impact in southern Africa, adoption of Xpert evidently offers reasonable value for its cost, based on conventional benchmarks for cost-effectiveness. However, the additional financial burden would be substantial, including significant increases in costs for treating HIV and MDR-TB. Given the fundamental influence of HIV on TB dynamics and intervention costs, care should be taken when interpreting the results of this analysis outside of settings with high HIV prevalence. Please see later in the article for the Editors' Summary PMID:23185139

Stochastic Industrial Source Detection Using Lower Cost Methods

NASA Astrophysics Data System (ADS)

Thoma, E.; George, I. J.; Brantley, H.; Deshmukh, P.; Cansler, J.; Tang, W.

2017-12-01

Hazardous air pollutants (HAPs) can be emitted from a variety of sources in industrial facilities, energy production, and commercial operations. Stochastic industrial sources (SISs) represent a subcategory of emissions from fugitive leaks, variable area sources, malfunctioning processes, and improperly controlled operations. From the shared perspective of industries and communities, cost-effective detection of mitigable SIS emissions can yield benefits such as safer working environments, cost saving through reduced product loss, lower air shed pollutant impacts, and improved transparency and community relations. Methods for SIS detection can be categorized by their spatial regime of operation, ranging from component-level inspection to high-sensitivity kilometer scale surveys. Methods can be temporally intensive (providing snap-shot measures) or sustained in both time-integrated and continuous forms. Each method category has demonstrated utility, however, broad adoption (or routine use) has thus far been limited by cost and implementation viability. Described here are a subset of SIS methods explored by the U.S EPA's next generation emission measurement (NGEM) program that focus on lower cost methods and models. An emerging systems approach that combines multiple forms to help compensate for reduced performance factors of lower cost systems is discussed. A case study of a multi-day HAP emission event observed by a combination of low cost sensors, open-path spectroscopy, and passive samplers is detailed. Early field results of a novel field gas chromatograph coupled with a fast HAP concentration sensor is described. Progress toward near real-time inverse source triangulation assisted by pre-modeled facility profiles using the Los Alamos Quick Urban & Industrial Complex (QUIC) model is discussed.

Carbon nanotube-embedded advanced aerospace composites for early-stage damage sensing

NASA Astrophysics Data System (ADS)

Nataraj, Latha; Coatney, Michael; Cain, Jason; Hall, Asha

2018-03-01

Fiber reinforced polymer (FRP) composites featuring outstanding fatigue performance, high specific stiffness and strength, and low density have evolved as critical structural materials in aerospace applications. Microscale damage such as fiber breakage, matrix cracking, and delamination could occur in layered composites compromising structural integrity, emphasizing the critical need to monitor structural health. Early damage detection would lead to enhanced reliability, lifetime, and performance while minimizing maintenance time, leading to enormous scientific and technical interest in realizing physically stable, quick responding, and cost effective strain sensing materials, devices, and techniques with high sensitivity over a broad range of the practical strain spectrum. Today's most commonly used strain sensing techniques are metal foil strain gauges and optical fiber sensors. Metal foil gauges offer high stability and cost-effectiveness but can only be surface-mounted and have a low gauge factor. Optical fibers require expensive instrumentation, are mostly insensitive to cracks parallel to the fiber orientation and may lead to crack initiation as the diameter is larger than that of the reinforcement fibers. Carbon nanotubes (CNTs) have attracted much attention due to high aspect ratio and superior electrical, thermal, and mechanical properties. CNTs embedded in layered composites have improved performance. A variety of CNT architectures and configurations have shown improved piezoresistive behavior and stability for sensing applications. However, scaling up and commercialization remain serious challenges. The current study investigates a simple, cost effective and repeatable technique for highly sensitive, stable, linear and repeatable strain sensing for damage detection by integrating CNT laminates into composites.

Chromatic aberration correction: an enhancement to the calibration of low-cost digital dermoscopes.

PubMed

Wighton, Paul; Lee, Tim K; Lui, Harvey; McLean, David; Atkins, M Stella

2011-08-01

We present a method for calibrating low-cost digital dermoscopes that corrects for color and inconsistent lighting and also corrects for chromatic aberration. Chromatic aberration is a form of radial distortion that often occurs in inexpensive digital dermoscopes and creates red and blue halo-like effects on edges. Being radial in nature, distortions due to chromatic aberration are not constant across the image, but rather vary in both magnitude and direction. As a result, distortions are not only visually distracting but could also mislead automated characterization techniques. Two low-cost dermoscopes, based on different consumer-grade cameras, were tested. Color is corrected by imaging a reference and applying singular value decomposition to determine the transformation required to ensure accurate color reproduction. Lighting is corrected by imaging a uniform surface and creating lighting correction maps. Chromatic aberration is corrected using a second-order radial distortion model. Our results for color and lighting calibration are consistent with previously published results, while distortions due to chromatic aberration can be reduced by 42-47% in the two systems considered. The disadvantages of inexpensive dermoscopy can be quickly substantially mitigated with a suitable calibration procedure. © 2011 John Wiley & Sons A/S.

An Experimental Examination of Quick Writing in the Middle School Science Classroom

ERIC Educational Resources Information Center

Benedek-Wood, Elizabeth; Mason, Linda H.; Wood, Philip H.; Hoffman, Katie E.; McGuire, Ashley

2014-01-01

A staggered A-B design study was used to evaluate the effects of Self- Regulated Strategy Development (SRSD) instruction for quick writing in middle school science across four classrooms. A sixth-grade science teacher delivered all students' writing assessment and SRSD instruction for informative quick writing. Results indicated that performance…

Cost-engineering modeling to support rapid concept development of an advanced infrared satellite system

NASA Astrophysics Data System (ADS)

Bell, Kevin D.; Dafesh, Philip A.; Hsu, L. A.; Tsuda, A. S.

1995-12-01

Current architectural and design trade techniques often carry unaffordable alternatives late into the decision process. Early decisions made during the concept exploration and development (CE&D) phase will drive the cost of a program more than any other phase of development; thus, designers must be able to assess both the performance and cost impacts of their early choices. The Space Based Infrared System (SBIRS) cost engineering model (CEM) described in this paper is an end-to-end process integrating engineering and cost expertise through commonly available spreadsheet software, allowing for concurrent design engineering and cost estimation to identify and balance system drives to reduce acquisition costs. The automated interconnectivity between subsystem models using spreadsheet software allows for the quick and consistent assessment of the system design impacts and relative cost impacts due to requirement changes. It is different from most CEM efforts attempted in the past as it incorporates more detailed spacecraft and sensor payload models, and has been applied to determine the cost drivers for an advanced infrared satellite system acquisition. The CEM is comprised of integrated detailed engineering and cost estimating relationships describing performance, design, and cost parameters. Detailed models have been developed to evaluate design parameters for the spacecraft bus and sensor; both step-starer and scanner sensor types incorporate models of focal plane array, optics, processing, thermal, communications, and mission performance. The current CEM effort has provided visibility to requirements, design, and cost drivers for system architects and decision makers to determine the configuration of an infrared satellite architecture that meets essential requirements cost effectively. In general, the methodology described in this paper consists of process building blocks that can be tailored to the needs of many applications. Descriptions of the spacecraft and payload subsystem models provide insight into The Aerospace Corporation expertise and scope of the SBIRS concept development effort.

On-Line Sentence Processing in Swedish: Cross-Linguistic Developmental Comparisons with French

ERIC Educational Resources Information Center

Kail, Michele; Kihlstedt, Maria; Bonnet, Philippe

2012-01-01

This study examined on-line processing of Swedish sentences in a grammaticality-judgement experiment within the framework of the Competition Model. Three age groups from 6 to 11 and an adult group were asked to detect grammatical violations as quickly as possible. Three factors concerning cue cost were studied: violation position (early vs. late),…

78 FR 52860 - Electronic Reporting of Toxics Release Inventory Data

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-27

..., decreasing the cost to EPA of processing forms, and providing TRI information more quickly to the public. The... reporting of TRI forms provides numerous benefits, including making it easier for facilities to report... Constitution Ave. NW., Washington, DC. The Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday...

Next Stop: OpenSim!

ERIC Educational Resources Information Center

Korolov, Maria

2011-01-01

Unhappy with conditions in Second Life, educators are migrating to a developing virtual world that offers them greater autonomy and a safer platform for their students at far less a cost. OpenSimulator is an open source virtual world platform that schools can run for free on their own servers or can get cheaply and quickly--the space can be up and…

Durability of sealants exposed to outdoor weathering and hot compression cycles

Treesearch

Gregory T. Schueneman; Steven Lacher; Christopher G. Hunt; Christopher C. White; Donald L. Hunston

2011-01-01

Sealants play an important role in weatherproofing structures by filling gaps and preventing air and water intrusion. When incorrectly selected or improperly applied, they may fail quickly, compromising durability of the structure. To ensure reliability and prevent the need for costly repairs to structures, it is necessary to measure durability and predict life...

Using REU Projects and Crowdsourcing to Facilitate Learning on Demand

ERIC Educational Resources Information Center

Liu, Hong P.; Klein, Jerry E.

2013-01-01

With the increasing complexity of technology and large quantities of data in our digital age, learning and training has become a major cost of employers. Employee competence depends more and more on how quickly one can acquire new knowledge and solve problems to meet pressing deadlines. This paper presents a practical method to use REU (Research…

Simulating Building Fires for Movies

NASA Technical Reports Server (NTRS)

Rodriguez, Ricardo C.; Johnson, Randall P.

1987-01-01

Fire scenes for cinematography staged at relatively low cost in method that combines several existing techniques. Nearly realistic scenes, suitable for firefighter training, produced with little specialized equipment. Sequences of scenes set up quickly and easily, without compromising safety because model not burned. Images of fire, steam, and smoke superimposed on image of building to simulate burning of building.

Benefits and Costs of Lexical Decomposition and Semantic Integration during the Processing of Transparent and Opaque English Compounds

ERIC Educational Resources Information Center

Ji, Hongbo; Gagne, Christina L.; Spalding, Thomas L.

2011-01-01

Six lexical decision experiments were conducted to examine the influence of complex structure on the processing speed of English compounds. All experiments revealed that semantically transparent compounds (e.g., "rosebud") were processed more quickly than matched monomorphemic words (e.g., "giraffe"). Opaque compounds (e.g., "hogwash") were also…

Image-Aided Navigation Using Cooperative Binocular Stereopsis

DTIC Science & Technology

2014-03-27

Global Postioning System . . . . . . . . . . . . . . . . . . . . . . . . . 1 IMU Inertial Measurement Unit...an intertial measurement unit ( IMU ). This technique capitalizes on an IMU’s ability to capture quick motion and the ability of GPS to constrain long...the sensor-aided IMU framework. Visual sensors provide a number of benefits, such as low cost and weight. These sensors are also able to measure

Human-Centered Command and Control of Future Autonomous Systems

DTIC Science & Technology

2013-06-01

introduce challenges with situation awareness, automation reliance, and accountability (Bainbridge, 1983). If not carefully designed and integrated...into users’ tasks, automation’s costs can quickly outweigh its benefits. A tempting solution to compensate for inherent human cognitive limitations is... Drury & Scott, 2008; Nehme, Scott, Cummings, & Furusho, 2006; Scott & Cummings, 2006). However, there have not been detailed prescriptive task

Clevidipine as a therapeutic and cost-effective alternative to sodium nitroprusside in patients with acute aortic syndromes.

PubMed

Alviar, Carlos L; Gutierrez, Alejandra; Cho, Leslie; Krishnaswamy, Amar; Saleh, Amr; Lincoff, Michael A; Roselli, Eric; Militello, Michael; Menon, Venu

2018-06-01

Sodium nitroprusside is the preferred agent for the treatment of high blood pressure during acute aortic syndrome if blood pressure remains elevated after heart rate control with beta-blockers. The increasing cost of sodium nitroprusside in the USA led us to assess the efficacy and safety of intravenous clevidipine, a calcium channel blocker with quick onset of action, short half-life and significantly lower costs than sodium nitroprusside, in patients presenting with acute aortic syndrome. We performed a retrospective chart review of consecutive patients admitted to the Cleveland Clinic Cardiac Intensive Care Unit from 2013-2016 with a diagnosis of acute aortic syndrome. Patients who received intravenous sodium nitroprusside were compared with those receiving intravenous clevidipine. The primary outcome was a significant difference in blood pressure at one, three and six hours. Secondary outcomes included time to achieving blood pressure target and in hospital mortality with rates of hypotension and bradycardia as safety endpoints. A total of 85 patients with suspected acute aortic pathology received clevidipine and 50 received sodium nitroprusside. Clinical and demographic characteristics were similar in both groups, except for a higher incidence of abdominal aortic aneurysm in the clevidipine group and for a trend towards higher use of labetalol in the clevidipine group. There were no significant differences in blood pressure or heart rate at one, three and six hours after starting either infusion. The rates of hypotension, bradycardia and in-hospital mortality did not differ. Time to achieve blood pressure control were also similar between groups. Intravenous clevidipine appears to be a safe and effective alternative to sodium nitroprusside for the management of high blood pressure during acute aortic dissection. In the USA, clevidipine could represent a cost effective therapy providing similar outcomes than sodium nitroprusside.

Modeling the patient and health system impacts of alternative xpert® MTB/RIF algorithms for the diagnosis of pulmonary tuberculosis in Addis Ababa, Ethiopia.

PubMed

Tesfaye, Abraham; Fiseha, Daniel; Assefa, Dawit; Klinkenberg, Eveline; Balanco, Silvia; Langley, Ivor

2017-05-02

To reduce global tuberculosis (TB) burden, the active disease must be diagnosed quickly and accurately and patients should be treated and cured. In Ethiopia, TB diagnosis mainly relies on spot-morning-spot (SMS) sputum sample smear analysis using Ziehl-Neelsen staining techniques (ZN). Since 2014 targeted use of xpert has been implemented. New diagnostic techniques have higher sensitivity and are likely to detect more cases if routinely implemented. The objective of our study was to project the effects of alternative diagnostic algorithms on the patient, health system, and costs, and identify cost-effective algorithms that increase TB case detection in Addis Ababa, Ethiopia. An observational quantitative modeling framework was applied using the Virtual Implementation approach. The model was designed to represent the operational and epidemiological context of Addis Ababa, the capital city of Ethiopia. We compared eight diagnostic algorithm with ZN microscopy, light emitting diode (LED) fluorescence microscopy and Xpert MTB/RIF. Interventions with an annualized cost per averted disability adjusted life year (DALY) of less than the Gross Domestic Product (GDP) per capita are considered cost-effective interventions. With a cost lower than the average per-capita GDP (US$690 for Ethiopia) for each averted disability adjusted life year (DALY), three of the modeled algorithms are cost-effective. Implementing them would have important patient, health system, and population-level effects in the context of Addis Ababa ❖ The full roll-out of Xpert MTB/RIF as the primary test for all presumptive TB cases would avert 91170 DALYs (95% credible interval [CrI] 54888 - 127448) with an additional health system cost of US$ 11.6 million over the next 10 years. The incremental cost-effectiveness ratio (ICER) is $370 per DALY averted. ❖ Same day LED fluorescence microscopy for all presumptive TB cases combined with Xpert MTB/RIF targeted to HIV-positive and High multidrug resistant (MDR) risk groups would avert 73600 DALYs( 95% CrI 48373 - 99214) with an additional cost of US$5.1 million over the next 10 years. The ICER is $169per DALY averted. ❖ Same-day LED fluorescence microscopy for all presumptive TB cases (and no Xpert MTB/RIF) would avert 43580 DALYs with a reduction cost of US$ 0.2 million over the next 10years. The ICER is $13 per DALY averted. The full roll-out of Xpert MTB/RIF is predicted to be the best option to substantially reduce the TB burden in Addis Ababa and is considered cost effective. However, the investment cost to implement this is far beyond the budget of the national TB control program. Targeted use of Xpert MTB/RIF for HIV positive and high MDR risk groups with same-day LED fluorescence microscopy for all other presumptive TB cases is an affordable alternative.

Process Cost Modeling for Multi-Disciplinary Design Optimization

NASA Technical Reports Server (NTRS)

Bao, Han P.; Freeman, William (Technical Monitor)

2002-01-01

For early design concepts, the conventional approach to cost is normally some kind of parametric weight-based cost model. There is now ample evidence that this approach can be misleading and inaccurate. By the nature of its development, a parametric cost model requires historical data and is valid only if the new design is analogous to those for which the model was derived. Advanced aerospace vehicles have no historical production data and are nowhere near the vehicles of the past. Using an existing weight-based cost model would only lead to errors and distortions of the true production cost. This report outlines the development of a process-based cost model in which the physical elements of the vehicle are costed according to a first-order dynamics model. This theoretical cost model, first advocated by early work at MIT, has been expanded to cover the basic structures of an advanced aerospace vehicle. Elemental costs based on the geometry of the design can be summed up to provide an overall estimation of the total production cost for a design configuration. This capability to directly link any design configuration to realistic cost estimation is a key requirement for high payoff MDO problems. Another important consideration in this report is the handling of part or product complexity. Here the concept of cost modulus is introduced to take into account variability due to different materials, sizes, shapes, precision of fabrication, and equipment requirements. The most important implication of the development of the proposed process-based cost model is that different design configurations can now be quickly related to their cost estimates in a seamless calculation process easily implemented on any spreadsheet tool. In successive sections, the report addresses the issues of cost modeling as follows. First, an introduction is presented to provide the background for the research work. Next, a quick review of cost estimation techniques is made with the intention to highlight their inappropriateness for what is really needed at the conceptual phase of the design process. The First-Order Process Velocity Cost Model (FOPV) is discussed at length in the next section. This is followed by an application of the FOPV cost model to a generic wing. For designs that have no precedence as far as acquisition costs are concerned, cost data derived from the FOPV cost model may not be accurate enough because of new requirements for shape complexity, material, equipment and precision/tolerance. The concept of Cost Modulus is introduced at this point to compensate for these new burdens on the basic processes. This is treated in section 5. The cost of a design must be conveniently linked to its CAD representation. The interfacing of CAD models and spreadsheets containing the cost equations is the subject of the next section, section 6. The last section of the report is a summary of the progress made so far, and the anticipated research work to be achieved in the future.

Can the Direct Medical Cost of Chronic Disease Be Transferred across Different Countries? Using Cost-of-Illness Studies on Type 2 Diabetes, Epilepsy and Schizophrenia as Examples

PubMed Central

Gao, Lan; Hu, Hao; Zhao, Fei-Li; Li, Shu-Chuen

2016-01-01

Objectives To systematically review cost of illness studies for schizophrenia (SC), epilepsy (EP) and type 2 diabetes mellitus (T2DM) and explore the transferability of direct medical cost across countries. Methods A comprehensive literature search was performed to yield studies that estimated direct medical costs. A generalized linear model (GLM) with gamma distribution and log link was utilized to explore the variation in costs that accounted by the included factors. Both parametric (Random-effects model) and non-parametric (Boot-strapping) meta-analyses were performed to pool the converted raw cost data (expressed as percentage of GDP/capita of the country where the study was conducted). Results In total, 93 articles were included (40 studies were for T2DM, 34 studies for EP and 19 studies for SC). Significant variances were detected inter- and intra-disease classes for the direct medical costs. Multivariate analysis identified that GDP/capita (p<0.05) was a significant factor contributing to the large variance in the cost results. Bootstrapping meta-analysis generated more conservative estimations with slightly wider 95% confidence intervals (CI) than the parametric meta-analysis, yielding a mean (95%CI) of 16.43% (11.32, 21.54) for T2DM, 36.17% (22.34, 50.00) for SC and 10.49% (7.86, 13.41) for EP. Conclusions Converting the raw cost data into percentage of GDP/capita of individual country was demonstrated to be a feasible approach to transfer the direct medical cost across countries. The approach from our study to obtain an estimated direct cost value along with the size of specific disease population from each jurisdiction could be used for a quick check on the economic burden of particular disease for countries without such data. PMID:26814959

Quantification, dissipation behavior and risk assessment of ethion in green pea by gas chromatography-electron capture detector.

PubMed

Jan, Ishrat; Dar, Alamgir A; Mubashir, Sofi; Alam Wani, Ashraf; Mukhtar, Malik; Sofi, Khurshid A; Dar, Irshad H; Sofi, Javid A

2018-05-01

Residue investigation was carried out to scrutinize the persistence, dissipation behavior, half-life, and risk assessment of ethion on green pea fruit by spraying ethion at the fruiting stage followed by another application at 10 day intervals. The samples were extracted by using a quick, easy, low-cost, effective, rugged, and safe method, and the residues of ethion were analyzed by gas chromatography with electron capture detection. Here we report a novel, accurate, and cost-effective gas chromatography method for the determination of average deposits of ethion on green pea. The initial deposits were found to be 4.65 mg/kg following the application of insecticide. Residues of ethion reached below the detection limit of 0.10 mg/kg after 25 days at recommended dosage. The half-life of ethion was found to be 4.62 days. For risk assessment studies, the 25th day will be safe for consumers for the consumption of green peas. The developed method is simple, sensitive, selective, and repeatable and can be extended for ethion-based standardization of herbal formulations containing green pea and its use in pesticide industries. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Simultaneous detection of bovine and porcine DNA in pharmaceutical gelatin capsules by duplex PCR assay for Halal authentication.

PubMed

Nikzad, Jafar; Shahhosseini, Soraya; Tabarzad, Maryam; Nafissi-Varcheh, Nastaran; Torshabi, Maryam

2017-02-14

In the pharmaceutical industry, hard- and soft-shelled capsules are typically made from gelatin, commonly derived from bovine and porcine sources. To ensure that pharmaceutical products comply with halal regulations in Muslim countries (no porcine products allowed), development of a valid, reliable, quick, and most importantly, cost-effective tests are of utmost importance. We developed a species-specific duplex polymerase chain reaction (PCR) assay targeting 149 bp porcine and 271 bp bovine mitochondrial DNA (mtDNA) to simultaneously detect both porcine and bovine DNA (in one reaction at the same time) in gelatin. Some additional simplex PCR tests (targeting 126 bp bovine and 212 bp porcine mtDNA) and real-time PCR using a commercially available kit (for identification of porcine DNA) were used to verify the selectivity and sensitivity of our duplex PCR. After optimization of DNA extraction and PCR methods, hard/soft pharmaceutical gelatin capsules (containing drug) were tested for the presence of porcine and/or bovine DNA. Duplex PCR detected the presence of as little as 0.1% porcine DNA, which was more accurate than the commercially available kit. Of all gelatin capsules tested (n = 24), 50% contained porcine DNA (pure porcine gelatin alone or in combination with bovine gelatin). Duplex PCR presents an easy-to-follow, quick, low-cost and reliable method to simultaneously detect porcine and bovine DNAs (>100 bp) in minute amounts in highly processed gelatin-containing pharmaceutical products (with a 0.1% sensitivity for porcine DNA) which may be used for halal authentication. Simultaneous detection of porcine and bovine DNA in gelatin capsules by duplex PCR.

Long-Time Stability of Ni-Ti-Shape Memory Alloys for Automotive Safety Systems

NASA Astrophysics Data System (ADS)

Strittmatter, Joachim; Gümpel, Paul

2011-07-01

In automotive a lot of electromagnetically, pyrotechnically or mechanically driven actuators are integrated to run comfort systems and to control safety systems in modern passenger cars. Using shape memory alloys (SMA) the existing systems could be simplified, performing the same function through new mechanisms with reduced size, weight, and costs. A drawback for the use of SMA in safety systems is the lack of materials knowledge concerning the durability of the switching function (long-time stability of the shape memory effect). Pedestrian safety systems play a significant role to reduce injuries and fatal casualties caused by accidents. One automotive safety system for pedestrian protection is the bonnet lifting system. Based on such an application, this article gives an introduction to existing bonnet lifting systems for pedestrian protection, describes the use of quick changing shape memory actuators and the results of the study concerning the long-time stability of the tested NiTi-wires. These wires were trained, exposed up to 4 years at elevated temperatures (up to 140 °C) and tested regarding their phase change temperatures, times, and strokes. For example, it was found that A P-temperature is shifted toward higher temperatures with longer exposing periods and higher temperatures. However, in the functional testing plant a delay in the switching time could not be detected. This article gives some answers concerning the long-time stability of NiTi-wires that were missing till now. With this knowledge, the number of future automotive applications using SMA can be increased. It can be concluded, that the use of quick changing shape memory actuators in safety systems could simplify the mechanism, reduce maintenance and manufacturing costs and should be insertable also for other automotive applications.

Early‐Stage Capital Cost Estimation of Biorefinery Processes: A Comparative Study of Heuristic Techniques

PubMed Central

Couturier, Jean‐Luc; Kokossis, Antonis; Dubois, Jean‐Luc

2016-01-01

Abstract Biorefineries offer a promising alternative to fossil‐based processing industries and have undergone rapid development in recent years. Limited financial resources and stringent company budgets necessitate quick capital estimation of pioneering biorefinery projects at the early stages of their conception to screen process alternatives, decide on project viability, and allocate resources to the most promising cases. Biorefineries are capital‐intensive projects that involve state‐of‐the‐art technologies for which there is no prior experience or sufficient historical data. This work reviews existing rapid cost estimation practices, which can be used by researchers with no previous cost estimating experience. It also comprises a comparative study of six cost methods on three well‐documented biorefinery processes to evaluate their accuracy and precision. The results illustrate discrepancies among the methods because their extrapolation on biorefinery data often violates inherent assumptions. This study recommends the most appropriate rapid cost methods and urges the development of an improved early‐stage capital cost estimation tool suitable for biorefinery processes. PMID:27484398

Development and testing of a new framework for rapidly assessing legal and managerial protection afforded by marine protected areas: Mediterranean Sea case study.

PubMed

Rodríguez-Rodríguez, D; Rodríguez, J; Abdul Malak, D

2016-02-01

The Convention on Biological Diversity (CBD) states the need to effectively conserve at least 10% of coastal and marine areas of particular importance for biodiversity by 2020. Here, a new indicator-based methodological framework to assess biodiversity protection afforded by marine protected areas' (MPA) was developed as a quick surrogate for MPAs' potential conservation effectiveness: the Marine Protected Area Protection Assessment Framework (MaPAF). The MaPAF consists of a limited number of headline indicators that are integrated in two indexes: Legal protection and Management effort, which eventually integrate in the overall MPA Protection super-index. The MaPAF was then tested in the Mediterranean MPA network as a case study. Spatial analyses were performed at three meaningful scales: the whole Mediterranean Sea, Mediterranean ecoregions and countries. The results of this study suggest that: 1) The MaPAF can serve as a useful tool for consistent, adaptive, quick and cost-effective MPA effectiveness assessments of MPAs and MPA networks in virtually any marine region, as the headline indicators used are commonly compiled and easy to retrieve; 2) The MaPAF proved usable and potentially relevant in the Mediterranean Sea where most indicators in the framework can be publicly accessed through the MAPAMED database and are planned to be regularly updated; 3) Protection afforded by MPAs is low across the whole Mediterranean, with only few MPAs having relatively high legal and managerial protection; and 4) Most Mediterranean countries need to devote substantially more work to improve MPA effectiveness mainly through increased management effort. Copyright © 2015 Elsevier Ltd. All rights reserved.

A Multi-Disciplinary Approach to Remote Sensing through Low-Cost UAVs.

PubMed

Calvario, Gabriela; Sierra, Basilio; Alarcón, Teresa E; Hernandez, Carmen; Dalmau, Oscar

2017-06-16

The use of Unmanned Aerial Vehicles (UAVs) based on remote sensing has generated low cost monitoring, since the data can be acquired quickly and easily. This paper reports the experience related to agave crop analysis with a low cost UAV. The data were processed by traditional photogrammetric flow and data extraction techniques were applied to extract new layers and separate the agave plants from weeds and other elements of the environment. Our proposal combines elements of photogrammetry, computer vision, data mining, geomatics and computer science. This fusion leads to very interesting results in agave control. This paper aims to demonstrate the potential of UAV monitoring in agave crops and the importance of information processing with reliable data flow.

A Multi-Disciplinary Approach to Remote Sensing through Low-Cost UAVs

PubMed Central

Calvario, Gabriela; Sierra, Basilio; Alarcón, Teresa E.; Hernandez, Carmen; Dalmau, Oscar

2017-01-01

The use of Unmanned Aerial Vehicles (UAVs) based on remote sensing has generated low cost monitoring, since the data can be acquired quickly and easily. This paper reports the experience related to agave crop analysis with a low cost UAV. The data were processed by traditional photogrammetric flow and data extraction techniques were applied to extract new layers and separate the agave plants from weeds and other elements of the environment. Our proposal combines elements of photogrammetry, computer vision, data mining, geomatics and computer science. This fusion leads to very interesting results in agave control. This paper aims to demonstrate the potential of UAV monitoring in agave crops and the importance of information processing with reliable data flow. PMID:28621740

Comparative analysis of Mouse Inoculation Test and Virus Isolation in Cell Culture for rabies diagnosis in animals of Parana, Brazil.

PubMed

Corona, Thaila Francini; Böger, Beatriz; Rocha, Tatiana Carneiro da; Svoboda, Walfrido Külh; Gomes, Eliane Carneiro

2018-01-01

Rabies is an acute zoonotic disease, caused by a rhabdovirus that can affect all mammals, and is commonly transmitted by the bite of a rabid animal. The definitive diagnosis is laboratorial, by the Fluorescent Antibody Test (FAT) as a quick test and Mouse Inoculation Test (MIT) as a confirmatory test (gold standard). Studies conducted over the past three decades indicate that MIT and Virus Isolation in Cell Culture (VICC) can provide the same effectiveness, the latter being considered superior in bioethics and animal welfare. The aim of this study was to compare VICC with MIT, in terms of accuracy, biosafety and occupational health, supply and equipment costs, bioethics and animal welfare, in a Brazilian public health lab. We utilized 400 samples of animal neurological tissue to compare the performance of VICC against MIT. The variables analyzed were accuracy, biosafety and occupational health, time spent in performing the tests, supply and equipment costs, bioethics and animal welfare evaluation. Both VICC and MIT had almost the same accuracy (99.8%), although VICC presented fewer risks regarding biosafety and mental health of the technicians, and reduced time between inoculation and obtaining the results (approximately 22 days less). In addition, VICC presented lower supply costs (86.5% less), equipment costs (32.6% less), and the advantage of not using animals. These results confirm that VICC can replace MIT, offering the same accuracy and better features regarding cost, results, biosafety and occupational health, and bioethics and animal welfare.

Support from the Morphological Family When Unembedding the Stem

ERIC Educational Resources Information Center

Beyersmann, Elisabeth; Grainger, Jonathan

2018-01-01

Recent research investigating embedded stem priming effects with the masked priming paradigm and pseudoword primes (e.g., "quickify"--"quick") has shown that priming effects can be obtained even when the embedded target word is followed by a non-morphological ending (e.g., "quickald"--"quick"). Here we…

Orbital Express Mission Operations Planning and Resource Management using ASPEN

NASA Technical Reports Server (NTRS)

Chouinard, Caroline; Knight, Russell; Jones, Grailing; Tran, Danny

2008-01-01

The Orbital Express satellite servicing demonstrator program is a DARPA program aimed at developing "a safe and cost-effective approach to autonomously service satellites in orbit". The system consists of: a) the Autonomous Space Transport Robotic Operations (ASTRO) vehicle, under development by Boeing Integrated Defense Systems, and b) a prototype modular next-generation serviceable satellite, NEXTSat, being developed by Ball Aerospace. Flexibility of ASPEN: a) Accommodate changes to procedures; b) Accommodate changes to daily losses and gains; c) Responsive re-planning; and d) Critical to success of mission planning Auto-Generation of activity models: a) Created plans quickly; b) Repetition/Re-use of models each day; and c) Guarantees the AML syntax. One SRP per day vs. Tactical team

Lymph nodes fine needle cytology in the diagnosis of infectious diseases: clinical settings.

PubMed

Natella, Valentina; Cozzolino, Immacolata; Sosa Fernandez, Laura Virginia; Vigliar, Elena

2012-01-01

Lymph node reactive hyperplasia, caused by specific infectious etiologic factors, represents the most frequent cause of enlarged peripheral lymph nodes. The main infectious agents are viruses, pyogenic bacteria, mycobacteria, fungi and protozoa that may determine unspecific or specific pathological entities, such as cat-scratch disease, toxoplasmosis or infectious mononucleosis. Lymph node fine needle cytology (FNC) is a safe, simple, cost-effective and efficient technique that quickly provides information about the cell population and the nature of the process. FNC can also provide suitable material for ancillary techniques, such as flow cytometry, immunocytochemistry, molecular biology and microbiological examinations. This study focuses on the cytological features of benign lymphadenopathy of infectious origin and their possible contribution to the clinical setting definition of corresponding patients.

Internet for law enforcement: a modern phenomena and a phenomenal tool

NASA Astrophysics Data System (ADS)

Wilsker, Ira

1997-02-01

There is an existing, low cost, and widely used framework in place for both the public distribution of law enforcement information, and the secure and restricted distribution of sensitive data. That is, of course, the Internet. Already, hundreds of law enforcement agencies around the world, at all levels, are utilizing this most cost effective medium for a variety of tasks. In the public mode, now with 21 - 35 million individuals in the U.S. having access, agencies typically make available contact information, Community Oriented Policing (COPS), employment, crime prevention, DARE, police explorer, and other helpful information. Most often this information is available via WWW page, or a local BBS. Other public access is available to thousands of specialized sites, such as forensics, training, narcotics, firearms, terrorism and hate crimes, K9, police supply, traffic related, crime prevention, most wanted, missing persons, etc. Public newsgroups provide a forum for local, national, and international law enforcement issues. In the private mode, there is a wide variety of restricted mail lists providing for the exchange of information on narrowly defined topics including forensics, firearms, COPS, officer survival, and other related areas. Traditional EMail provides another cost effective method for the exchange of information, either to a specific point, or broadcast to an explicit wide audience. As a secure method of quickly exchanging information in a most cost effective way, encrypted data, typically text, files, or images, can be instantly transmitted between individuals or agencies. Commonly available encryption technology (the most commonly used is PGP, a public key encryption utility), is freely or inexpensively available. An additional Internet benefit available to the law enforcement community, is the availability of software. Currently available is a variety of accident investigation, crime scene, dispatch, maintenance, evidence tracking, and other useful software. This software can typically be downloaded and updated for free, or for a nominal cost. It is imperative that more agencies make use of this valuable resource; while hundreds are, thousands are not.

Choosing iPad Apps with a Purpose: Aligning Skills and Standards

ERIC Educational Resources Information Center

Powell, Selma

2014-01-01

With the number of apps available today, browsing the iTunes store can become overwhelming for any teacher. A teacher can quickly try free apps, but to have full access, cost is often involved. Purchasing numerous apps can be expensive and time consuming and, most important, may not produce an outcome of acquiring tools that are well aligned with…

Benefit from NASA

NASA Image and Video Library

2004-04-15

Marshall Space Flight Center engineers helped North American Marine Jet (NAMJ), Inc. improve the proposed design of a new impeller for jet propulsion system. With a three-dimensional computer model of the new marine jet engine blades, engineers were able to quickly create a solid ploycarbonate model of it. The rapid prototyping allowed the company to avoid many time-consuming and costly steps in creating the impeller.

Benefit from NASA

NASA Image and Video Library

1996-01-01

Marshall space Flight Center engineers helped North American Marine Jet (NAMJ), Inc. improve the proposed design of a new impeller for a jet-propulsion system. With a three-dimensional computer model of the new marine jet engine blades, engineers were able to quickly create a solid polycarbonate model of it. The rapid prototyping allowed the company to avoid many time-consuming and costly steps in creating the impeller.

Breakthrough at the Missouri River Breaks: A quick tool for comparing burned and unburned sites

Treesearch

Rachael Clark; Theresa Jain

2009-01-01

A quantitative understanding of how forests work, both before and after (prescribed and wild) fire, is essential to management. Yet acquiring the kind of broad yet detailed information needed for many management decisions can be costly, tedious, and time-consuming. After two sweeping wildfires in the Missouri River Breaks area of eastern Montana - the Indian and...

Sex ratio selection and multi-factorial sex determination in the housefly: a dynamic model.

PubMed

Kozielska, M; Pen, I; Beukeboom, L W; Weissing, F J

2006-05-01

Sex determining (SD) mechanisms are highly variable between different taxonomic groups and appear to change relatively quickly during evolution. Sex ratio selection could be a dominant force causing such changes. We investigate theoretically the effect of sex ratio selection on the dynamics of a multi-factorial SD system. The system considered resembles the naturally occurring three-locus system of the housefly, which allows for male heterogamety, female heterogamety and a variety of other mechanisms. Sex ratio selection is modelled by assuming cost differences in the production of sons and daughters, a scenario leading to a strong sex ratio bias in the absence of constraints imposed by the mechanism of sex determination. We show that, despite of the presumed flexibility of the SD system considered, equilibrium sex ratios never deviate strongly from 1 : 1. Even if daughters are very costly, a male-biased sex ratio can never evolve. If sons are more costly, sex ratio can be slightly female biased but even in case of large cost differences the bias is very small (<10% from 1 : 1). Sex ratio selection can lead to a shift in the SD mechanism, but cannot be the sole cause of complete switches from one SD system to another. In fact, more than one locus remains polymorphic at equilibrium. We discuss our results in the context of evolution of the variable SD mechanism found in natural housefly populations.

Early adoption of cyclosporine and recombinant human erythropoietin: clinical, economic, and policy issues with emergence of high-cost drugs.

PubMed

Powe, N R; Eggers, P W; Johnson, C B

1994-07-01

The discovery of new drugs and their introduction into US markets will become an intense area of focus should health care reform result in Medicare insurance coverage for prescription drugs. Particular attention will be focused on high-cost drugs. Two high-cost drugs, cyclosporine and recombinant human erythropoietin (rHuEPO), introduced into the clinical management of patients with kidney disease during the past decade, provide some experience concerning the forces affecting the use of expensive drugs in a cost-conscious health care system. The decision to prescribe a drug will depend on provider's judgements of the drug's clinical benefits and costs compared with those of other possible therapies. It may also depend on payment policy. Both cyclosporine and rHuEPO were adopted rapidly and extensively by providers of end-stage renal disease care following US Food and Drug Administration approval, despite their high costs. Both drugs were remarkably effective, relatively safe, and able to be administered without great difficulty compared with the therapies they have replaced. There was no additional payment to hospitals for the initial use of cyclosporine, which was introduced in 1983 at the time when Medicare's prospective payment was established, since choice of immunosuppressive agent did not affect the fixed, per-admission payment determined by the diagnosis-related group for kidney transplantation. Medicare coverage for continuing outpatient use of cyclosporine was not initially provided, in contrast to rHuEPO, which was introduced in 1989 with Medicare outpatient coverage and payment of 80% of the allowed charge. Despite their high costs and different methods of insurance payment both drugs achieved a rather quick and high penetration rate into their respective populations.(ABSTRACT TRUNCATED AT 250 WORDS)

Assessment of ecological passages along road networks within the Mediterranean forest using GIS-based multi criteria evaluation approach.

PubMed

Gülci, Sercan; Akay, Abdullah Emin

2015-12-01

Major roads cause barrier effect and fragmentation on wildlife habitats that are suitable places for feeding, mating, socializing, and hiding. Due to wildlife collisions (Wc), human-wildlife conflicts result in lost lives and loss of biodiversity. Geographical information system (GIS)-based multi criteria evaluation (MCE) methods have been successfully used in short-term planning of road networks considering wild animals. Recently, wildlife passages have been effectively utilized as road engineering structures provide quick and certain solutions for traffic safety and wildlife conservation problems. GIS-based MCE methods provide decision makers with optimum location for ecological passages based on habitat suitability models (HSMs) that classify the areas based on ecological requirements of target species. In this study, ecological passages along Motorway 52 within forested areas in Mediterranean city of Osmaniye in Turkey were evaluated. Firstly, HSM coupled with nine eco-geographic decision variables were developed based on ecological requirements of roe deer (Capreolus capreolus) that were chosen as target species. Then specified decision variables were evaluated using GIS-based weighted linear combination (WLC) method to estimate movement corridors and mitigation points along the motorway. In the solution process, two linkage nodes were evaluated for eco-passages which were determined based on the least-cost movement corridor intersecting with the motorway. One of the passages was identified as a natural wildlife overpass while the other was suggested as underpass construction. The results indicated that computer-based models provide accurate and quick solutions for positioning ecological passages to reduce environmental effects of road networks on wild animals.

What drives health policy formulation: insights from the Nepal maternity incentive scheme?

PubMed

Ensor, Tim; Clapham, Susan; Prasai, Devi Prasad

2009-05-01

Although maternal health outcomes have improved considerably in Nepal, continued low levels of skilled attendance and unequal access to safe emergency obstetric care continues to be central policy concern. The financial costs of delivery exacerbated are thought to continue to represent a major barrier to care to accessing services. Policy interest in this area moved swiftly. Skilled birth attendance came under the spotlight in 2001 while research on costs was commissioned in 2003. The resulting conclusions suggested substantial costs particularly on the demand side in the form of transport costs. After the research was completed the Government moved quickly to develop policy on financial barriers to skilled attendance leading to the Maternity Incentive Scheme that was implemented in 2005. We explored the reasons for policy acceptance and implementation based on recent studies in this area and a series of key informant interviews in the country. A variety of reasons can be shown to be important in ensuring that the research was utilised quickly. The conduct of the research process was importance, particularly by ensuring that results were communicated widely in a way that responded to both technical and political policy-making concerns. A convergence of political interests that meant that the policy became an ideal vehicle for improving the flagging fortunes of the government was also seen as crucial in expediting policy change although it also meant that the policy had to be adjusted to cater to political rather purely technical concerns. The experience also underlines the importance of political champions within or close to government in advocating a strong policy line through channels that researchers can rarely access.

Problems unique to offshore measurement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Young, J.G.

1995-12-01

Most of us have arrived at this meeting in some kind of company provided transportation. This is supplied in order for us to do our assigned jobs. These may be trucks, or cars, or even helicopters, and maybe boats. All who are involved in the offshore industry know that transportation is the cost costly of all. The helicopter bill for our company is a bill which costs us somewhere in the 9 million dollar range. Since this costs us so much, we are constantly looking at ways to reduce this. The helicopters we use cost us $510.00 a flying hourmore » plus $28,000.00 a month for lease. These helicopters fly in the neighborhood of 140 miles per hour. You can quickly see how fast the cost can climb. We have two technicians, along with a pilot, and approx. 400 lbs of test gear and spare parts. You have to carry all you think you will need for the day`s activities because it`s a long and costly trip to go pick up some gasket material or an orifice plate.« less

A short course of cardiac rehabilitation program is highly cost effective in improving long-term quality of life in patients with recent myocardial infarction or percutaneous coronary intervention.

PubMed

Yu, Cheuk-Man; Lau, Chu-Pak; Chau, June; McGhee, Sarah; Kong, Shun-Ling; Cheung, Bernard Man-Yung; Li, Leonard Sheung-Wai

2004-12-01

To evaluate the long-term effect of a cardiac rehabilitation and prevention program (CRPP) on quality of life (QOL) and its cost effectiveness. Prospective, randomized controlled trial. University-affiliated outpatient cardiac rehabilitation and prevention center. A total of 269 patients (76% men; mean age, 64+/-11 y) with recent acute myocardial infarction (AMI; n=193) or after elective percutaneous coronary intervention (PCI; n=76) were randomized in a ratio of 2 to 1. Patients received either CRPP (an 8-wk exercise and education class in phase 2) or conventional therapy without exercise program (control group). They were followed until they had completed all 4 phases of the program (ie, 2 y). QOL assessments, by using the Medical Outcomes Study 36-Item Short-Form Health Survey (SF-36) and Symptoms Questionnaire, were performed at the end of each phase. Direct health care cost was calculated, whereas cost utility was estimated as money spent (in US dollars) per quality-adjusted life-year (QALY) gained. In the CRPP group, 6 of the 8 SF-36 dimensions improved significantly by phase 2 and were maintained throughout the study period. Patients were less anxious and depressed, and felt more relaxed and contented. In the control group, none of the SF-36 dimensions were improved by phase 2, and bodily pain was increased. In phase 4, only 4 dimensions were improved. Symptoms were unchanged except for increased hostility score. There was a significant gain in net time trade-off in the CRPP group after phase 2. The direct health care expenses in the CRPP and control groups were 15,292 dollars and 15,707 dollars per patient, respectively. Therefore, the cost utility calculated was 640 dollars saved per QALY gained. Savings attributable to CRPP were primarily explained by the lower rate (13% vs 26% of patients, chi2 test=3.9, P <.05) and cost of subsequent PCI (P =.01). In an era of managing patients with coronary heart disease, a short-course CRPP was highly cost effective in providing better QOL to patients with recent AMI or after elective PCI. In addition, the improvement of QOL was quick and sustained for at least 2 years after CRPP.

A Feasibility Study on Using an Internet-Panel Survey to Measure Perceptions of E-cigarettes in 3 Metropolitan Areas, 2015.

PubMed

Miller, Eric A; Berman, Lewis; Atienza, Audie; Middleton, Deirdre; Iachan, Ronaldo; Tortora, Robert; Boyle, John

Internet-panel surveys are emerging as a means to quickly and cost-effectively collect health data, and because of their large memberships, they could be used for community-level surveys. To determine the feasibility of using an internet-panel survey to quickly provide community-level data, we conducted a pilot test of a health survey in 3 US metropolitan areas. We conducted internet-panel surveys in Cleveland, Ohio; New York, New York; and Seattle, Washington, in 2015. Slightly more than 500 people responded to the survey in each city. We compared weighted unadjusted prevalence estimates from the internet-panel data with estimates from the 2014 Health Information National Trends Survey (HINTS) for the following question in each survey: "Compared to smoking cigarettes, would you say that electronic cigarettes are…much less harmful, less harmful, just as harmful, more harmful, much more harmful, or I've never heard of electronic cigarettes." We used multivariable logistic regression to compare associations of respondents' demographic and health characteristics with perceived harm from e-cigarettes. The prevalence of the perception that e-cigarettes are less harmful than smoking cigarettes ranged from 35.9% to 39.9% in the internet-panel sites and was 43.0% in HINTS. Most patterns of beliefs and respondent characteristics in the internet-panel data were consistent with patterns in HINTS. We found inconsistent patterns between internet-panel sites and HINTS by race/ethnicity and education. This feasibility study found that internet-panel surveys could quickly produce community-level data for targeted public health interventions and evaluation, but they may be limited in producing estimates among subgroups.

Handling Emergency Management in [an] Object Oriented Modeling Environment

NASA Technical Reports Server (NTRS)

Tokgoz, Berna Eren; Cakir, Volkan; Gheorghe, Adrian V.

2010-01-01

It has been understood that protection of a nation from extreme disasters is a challenging task. Impacts of extreme disasters on a nation's critical infrastructures, economy and society could be devastating. A protection plan itself would not be sufficient when a disaster strikes. Hence, there is a need for a holistic approach to establish more resilient infrastructures to withstand extreme disasters. A resilient infrastructure can be defined as a system or facility that is able to withstand damage, but if affected, can be readily and cost-effectively restored. The key issue to establish resilient infrastructures is to incorporate existing protection plans with comprehensive preparedness actions to respond, recover and restore as quickly as possible, and to minimize extreme disaster impacts. Although national organizations will respond to a disaster, extreme disasters need to be handled mostly by local emergency management departments. Since emergency management departments have to deal with complex systems, they have to have a manageable plan and efficient organizational structures to coordinate all these systems. A strong organizational structure is the key in responding fast before and during disasters, and recovering quickly after disasters. In this study, the entire emergency management is viewed as an enterprise and modelled through enterprise management approach. Managing an enterprise or a large complex system is a very challenging task. It is critical for an enterprise to respond to challenges in a timely manner with quick decision making. This study addresses the problem of handling emergency management at regional level in an object oriented modelling environment developed by use of TopEase software. Emergency Operation Plan of the City of Hampton, Virginia, has been incorporated into TopEase for analysis. The methodology used in this study has been supported by a case study on critical infrastructure resiliency in Hampton Roads.

Development of Flood Inundation Libraries using Historical Satellite Data and DEM for Part of Godavari Basin: An Approach Towards Better Flood Management

NASA Astrophysics Data System (ADS)

Bhatt, C. M.; Rao, G. S.; Patro, B.

2014-12-01

Conventional method of identifying areas to be inundated for issuing flood alert require inputs like discharge data, fine resolution digital elevation model (DEM), software for modelling and technically trained manpower to interpret the results meaningfully. Due to poor availability of these inputs, including good network of historical hydrological observations and limitation of time, quick flood early warning becomes a difficult task. Presently, based on the daily river water level and forecasted water level for major river systems in India, flood alerts are provided which are non-spatial in nature and does not help in understanding the inundation (spatial dimension) which may be caused at various water levels. In the present paper a concept for developing a series of flood-inundation map libraries two approaches are adopted one by correlating inundation extent derived from historical satellite data analysis with the corresponding water level recorded by the gauge station and the other simulation of inundation using digital elevation model (DEM's) is demonstrated for a part of Godavari Basin. The approach explained can be one of quick and cost-effective method for building a library of flood inundation extents, which can be utilized during flood disaster for alerting population and taking the relief and rescue operations. This layer can be visualized from a spatial dimension together with other spatial information like administrative boundaries, transport network, land use and land cover, digital elevation data and satellite images for better understanding and visualization of areas to be inundated spatially on free web based earth visualization portals like ISRO's Bhuvan portal (http://bhuvan.nrsc.gov.in). This can help decision makers in taking quick appropriate measures for warning, planning relief and rescue operations for the population to get affected under that river stage.

Introduction to magnification in endodontics.

PubMed

Arens, Donald E

2003-01-01

Dentistry has recently recognized the practicality and benefits of treating damaged and diseased oral tissues under high magnification levels. Initially, enhanced vision was more-or-less restricted to the use of prescription bifocals, awkward magnifying loops, and heavy cumbersome telephoto glasses; the microscope drew little interest and was quickly viewed as another useless and expensive dental gadget. However, owing to the very nature and demands of the therapy, endodontists were quick to accept and adopt this technology, and the manufacturers were quick to adapt and market their surgical microscopes to the endodontic office. Since acceptance leads to progression, we are currently witnessing manufacturers adapting the microscopic and other magnifying lenses to other areas of dentistry. However, choosing and purchasing a microscope involves a great number of issues, including the adequacy of one's present vision, the type of practice conducted, the demands one places on the quality of his or her dentistry, and the amount of time and expense one wishes to devote to becoming competent in using magnification. In addition, one must become familiar with what the different levels of magnification offer, what different depths and widths of field meet their normal practice needs, the amount of space required for the equipment, and whether the investment is cost effective. This article details all of the benefits as well as the difficulties encountered when embarking on a magnification journey. The art of dentistry is based on precision. The human naked eye is capable of distinguishing fine detail, but it is no match for what can be accomplished when an image is sharpened and enlarged. The microscope and other forms of magnification fill that need, especially for accomplishing endodontic procedures.

A PC-based telemetry system for acquiring and reducing data from multiple PCM streams

NASA Astrophysics Data System (ADS)

Simms, D. A.; Butterfield, C. P.

1991-07-01

The Solar Energy Research Institute's (SERI) Wind Research Program is using Pulse Code Modulation (PCM) Telemetry Data-Acquisition Systems to study horizontal-axis wind turbines. Many PCM systems are combined for use in test installations that require accurate measurements from a variety of different locations. SERI has found them ideal for data-acquisition from multiple wind turbines and meteorological towers in wind parks. A major problem has been in providing the capability to quickly combine and examine incoming data from multiple PCM sources in the field. To solve this problem, SERI has developed a low-cost PC-based PCM Telemetry Data-Reduction System (PC-PCM System) to facilitate quick, in-the-field multiple-channel data analysis. The PC-PCM System consists of two basic components. First, PC-compatible hardware boards are used to decode and combine multiple PCM data streams. Up to four hardware boards can be installed in a single PC, which provides the capability to combine data from four PCM streams directly to PC disk or memory. Each stream can have up to 62 data channels. Second, a software package written for use under DOS was developed to simplify data-acquisition control and management. The software, called the Quick-Look Data Management Program, provides a quick, easy-to-use interface between the PC and multiple PCM data streams. The Quick-Look Data Management Program is a comprehensive menu-driven package used to organize, acquire, process, and display information from incoming PCM data streams. The paper describes both hardware and software aspects of the SERI PC-PCM system, concentrating on features that make it useful in an experiment test environment to quickly examine and verify incoming data from multiple PCM streams. Also discussed are problems and techniques associated with PC-based telemetry data-acquisition, processing, and real-time display.

Application of automated measurement and verification to utility energy efficiency program data

DOE PAGES

Granderson, Jessica; Touzani, Samir; Fernandes, Samuel; ...

2017-02-17

Trustworthy savings calculations are critical to convincing regulators of both the cost-effectiveness of energy efficiency program investments and their ability to defer supply-side capital investments. Today’s methods for measurement and verification (M&V) of energy savings constitute a significant portion of the total costs of energy efficiency programs. They also require time-consuming data acquisition. A spectrum of savings calculation approaches is used, with some relying more heavily on measured data and others relying more heavily on estimated, modeled, or stipulated data. The increasing availability of “smart” meters and devices that report near-real time data, combined with new analytical approaches to quantifymore » savings, offers the potential to conduct M&V more quickly and at lower cost, with comparable or improved accuracy. Commercial energy management and information systems (EMIS) technologies are beginning to offer these ‘M&V 2.0’ capabilities, and program administrators want to understand how they might assist programs in quickly and accurately measuring energy savings. This paper presents the results of recent testing of the ability to use automation to streamline the M&V process. In this paper, we apply an automated whole-building M&V tool to historic data sets from energy efficiency programs to begin to explore the accuracy, cost, and time trade-offs between more traditional M&V, and these emerging streamlined methods that use high-resolution energy data and automated computational intelligence. For the data sets studied we evaluate the fraction of buildings that are well suited to automated baseline characterization, the uncertainty in gross savings that is due to M&V 2.0 tools’ model error, and indications of labor time savings, and how the automated savings results compare to prior, traditionally determined savings results. The results show that 70% of the buildings were well suited to the automated approach. In a majority of the cases (80%) savings and uncertainties for each individual building were quantified to levels above the criteria in ASHRAE Guideline 14. In addition the findings suggest that M&V 2.0 methods may also offer time-savings relative to traditional approaches. Lastly, we discuss the implications of these findings relative to the potential evolution of M&V, and pilots currently being launched to test how M&V automation can be integrated into ratepayer-funded programs and professional implementation and evaluation practice.« less

Application of automated measurement and verification to utility energy efficiency program data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Granderson, Jessica; Touzani, Samir; Fernandes, Samuel

Trustworthy savings calculations are critical to convincing regulators of both the cost-effectiveness of energy efficiency program investments and their ability to defer supply-side capital investments. Today’s methods for measurement and verification (M&V) of energy savings constitute a significant portion of the total costs of energy efficiency programs. They also require time-consuming data acquisition. A spectrum of savings calculation approaches is used, with some relying more heavily on measured data and others relying more heavily on estimated, modeled, or stipulated data. The increasing availability of “smart” meters and devices that report near-real time data, combined with new analytical approaches to quantifymore » savings, offers the potential to conduct M&V more quickly and at lower cost, with comparable or improved accuracy. Commercial energy management and information systems (EMIS) technologies are beginning to offer these ‘M&V 2.0’ capabilities, and program administrators want to understand how they might assist programs in quickly and accurately measuring energy savings. This paper presents the results of recent testing of the ability to use automation to streamline the M&V process. In this paper, we apply an automated whole-building M&V tool to historic data sets from energy efficiency programs to begin to explore the accuracy, cost, and time trade-offs between more traditional M&V, and these emerging streamlined methods that use high-resolution energy data and automated computational intelligence. For the data sets studied we evaluate the fraction of buildings that are well suited to automated baseline characterization, the uncertainty in gross savings that is due to M&V 2.0 tools’ model error, and indications of labor time savings, and how the automated savings results compare to prior, traditionally determined savings results. The results show that 70% of the buildings were well suited to the automated approach. In a majority of the cases (80%) savings and uncertainties for each individual building were quantified to levels above the criteria in ASHRAE Guideline 14. In addition the findings suggest that M&V 2.0 methods may also offer time-savings relative to traditional approaches. Lastly, we discuss the implications of these findings relative to the potential evolution of M&V, and pilots currently being launched to test how M&V automation can be integrated into ratepayer-funded programs and professional implementation and evaluation practice.« less

Effectiveness and Cost Efficiency of Different Surveillance Components for Proving Freedom and Early Detection of Disease: Bluetongue Serotype 8 in Cattle as Case Study for Belgium, France and the Netherlands.

PubMed

Welby, S; van Schaik, G; Veldhuis, A; Brouwer-Middelesch, H; Peroz, C; Santman-Berends, I M; Fourichon, C; Wever, P; Van der Stede, Y

2017-12-01

Quick detection and recovery of country's freedom status remain a constant challenge in animal health surveillance. The efficacy and cost efficiency of different surveillance components in proving the absence of infection or (early) detection of bluetongue serotype 8 in cattle populations within different countries (the Netherlands, France, Belgium) using surveillance data from years 2006 and 2007 were investigated using an adapted scenario tree model approach. First, surveillance components (sentinel, yearly cross-sectional and passive clinical reporting) within each country were evaluated in terms of efficacy for substantiating freedom of infection. Yearly cross-sectional survey and passive clinical reporting performed well within each country with sensitivity of detection values ranging around 0.99. The sentinel component had a sensitivity of detection around 0.7. Secondly, how effective the components were for (early) detection of bluetongue serotype 8 and whether syndromic surveillance on reproductive performance, milk production and mortality data available from the Netherlands and Belgium could be of added value were evaluated. Epidemic curves were used to estimate the timeliness of detection. Sensitivity analysis revealed that expected within-herd prevalence and number of herds processed were the most influential parameters for proving freedom and early detection. Looking at the assumed direct costs, although total costs were low for sentinel and passive clinical surveillance components, passive clinical surveillance together with syndromic surveillance (based on reproductive performance data) turned out most cost-efficient for the detection of bluetongue serotype 8. To conclude, for emerging or re-emerging vectorborne disease that behaves such as bluetongue serotype 8, it is recommended to use passive clinical and syndromic surveillance as early detection systems for maximum cost efficiency and sensitivity. Once an infection is detected and eradicated, cross-sectional screening for substantiating freedom of infection and sentinel for monitoring the disease evolution are recommended. © 2016 Blackwell Verlag GmbH.

Laser notching ceramics for reliable fracture toughness testing

DOE PAGES

Barth, Holly D.; Elmer, John W.; Freeman, Dennis C.; ...

2015-09-19

A new method for notching ceramics was developed using a picosecond laser for fracture toughness testing of alumina samples. The test geometry incorporated a single-edge-V-notch that was notched using picosecond laser micromachining. This method has been used in the past for cutting ceramics, and is known to remove material with little to no thermal effect on the surrounding material matrix. This study showed that laser-assisted-machining for fracture toughness testing of ceramics was reliable, quick, and cost effective. In order to assess the laser notched single-edge-V-notch beam method, fracture toughness results were compared to results from other more traditional methods, specificallymore » surface-crack in flexure and the chevron notch bend tests. Lastly, the results showed that picosecond laser notching produced precise notches in post-failure measurements, and that the measured fracture toughness results showed improved consistency compared to traditional fracture toughness methods.« less

Antiviral T-cell therapy

PubMed Central

Leen, Ann M; Heslop, Helen E; Brenner, Malcolm K

2013-01-01

Summary Serious viral infections are a common cause of morbidity and mortality after allogeneic stem cell transplantation. They occur in the majority of allograft recipients and are fatal in 17–20%. These severe infections may be prolonged or recurrent and add substantially to the cost, both human and financial, of the procedure. Many features of allogeneic stem cell transplantation contribute to this high rate of viral disease. The cytotoxic and immunosuppressive drugs administered pre-transplant to eliminate the host hematopoietic/immune system and any associated malignancy, the delay in recapitulating immune ontogeny post-transplant, the immunosuppressive drugs given to prevent graft versus host disease (GvHD), and the effects of GvHD itself, all serve to make stem cell transplant recipients vulnerable to disease from endogenous (latent) and exogenous (community) viruses, and to be incapable of controlling them as quickly and effectively as most normal individuals. PMID:24517423

Application of Approximate Pattern Matching in Two Dimensional Spaces to Grid Layout for Biochemical Network Maps

PubMed Central

Inoue, Kentaro; Shimozono, Shinichi; Yoshida, Hideaki; Kurata, Hiroyuki

2012-01-01

Background For visualizing large-scale biochemical network maps, it is important to calculate the coordinates of molecular nodes quickly and to enhance the understanding or traceability of them. The grid layout is effective in drawing compact, orderly, balanced network maps with node label spaces, but existing grid layout algorithms often require a high computational cost because they have to consider complicated positional constraints through the entire optimization process. Results We propose a hybrid grid layout algorithm that consists of a non-grid, fast layout (preprocessor) algorithm and an approximate pattern matching algorithm that distributes the resultant preprocessed nodes on square grid points. To demonstrate the feasibility of the hybrid layout algorithm, it is characterized in terms of the calculation time, numbers of edge-edge and node-edge crossings, relative edge lengths, and F-measures. The proposed algorithm achieves outstanding performances compared with other existing grid layouts. Conclusions Use of an approximate pattern matching algorithm quickly redistributes the laid-out nodes by fast, non-grid algorithms on the square grid points, while preserving the topological relationships among the nodes. The proposed algorithm is a novel use of the pattern matching, thereby providing a breakthrough for grid layout. This application program can be freely downloaded from http://www.cadlive.jp/hybridlayout/hybridlayout.html. PMID:22679486

Application of approximate pattern matching in two dimensional spaces to grid layout for biochemical network maps.

PubMed

Inoue, Kentaro; Shimozono, Shinichi; Yoshida, Hideaki; Kurata, Hiroyuki

2012-01-01

For visualizing large-scale biochemical network maps, it is important to calculate the coordinates of molecular nodes quickly and to enhance the understanding or traceability of them. The grid layout is effective in drawing compact, orderly, balanced network maps with node label spaces, but existing grid layout algorithms often require a high computational cost because they have to consider complicated positional constraints through the entire optimization process. We propose a hybrid grid layout algorithm that consists of a non-grid, fast layout (preprocessor) algorithm and an approximate pattern matching algorithm that distributes the resultant preprocessed nodes on square grid points. To demonstrate the feasibility of the hybrid layout algorithm, it is characterized in terms of the calculation time, numbers of edge-edge and node-edge crossings, relative edge lengths, and F-measures. The proposed algorithm achieves outstanding performances compared with other existing grid layouts. Use of an approximate pattern matching algorithm quickly redistributes the laid-out nodes by fast, non-grid algorithms on the square grid points, while preserving the topological relationships among the nodes. The proposed algorithm is a novel use of the pattern matching, thereby providing a breakthrough for grid layout. This application program can be freely downloaded from http://www.cadlive.jp/hybridlayout/hybridlayout.html.

Mutator dynamics in sexual and asexual experimental populations of yeast.

PubMed

Raynes, Yevgeniy; Gazzara, Matthew R; Sniegowski, Paul D

2011-06-07

In asexual populations, mutators may be expected to hitchhike with associated beneficial mutations. In sexual populations, recombination is predicted to erode such associations, inhibiting mutator hitchhiking. To investigate the effect of recombination on mutators experimentally, we compared the frequency dynamics of a mutator allele (msh2Δ) in sexual and asexual populations of Saccharomyces cerevisiae. Mutator strains increased in frequency at the expense of wild-type strains in all asexual diploid populations, with some approaching fixation in 150 generations of propagation. Over the same period of time, mutators declined toward loss in all corresponding sexual diploid populations as well as in haploid populations propagated asexually. We report the first experimental investigation of mutator dynamics in sexual populations. We show that a strong mutator quickly declines in sexual populations while hitchhiking to high frequency in asexual diploid populations, as predicted by theory. We also show that the msh2Δ mutator has a high and immediate realized cost that is alone sufficient to explain its decline in sexual populations. We postulate that this cost is indirect; namely, that it is due to a very high rate of recessive lethal or strongly deleterious mutation. However, we cannot rule out the possibility that msh2Δ also has unknown directly deleterious effects on fitness, and that these effects may differ between haploid asexual and sexual populations. Despite these reservations, our results prompt us to speculate that the short-term cost of highly deleterious recessive mutations can be as important as recombination in preventing mutator hitchhiking in sexual populations.

Integrating health economics into the product development cycle: a case study of absorbable pins for treating hallux valgus.

PubMed

Vallejo-Torres, Laura; Steuten, Lotte; Parkinson, Bonny; Girling, Alan J; Buxton, Martin J

2011-01-01

The probability of reimbursement is a key factor in determining whether to proceed with or abandon a product during its development. The purpose of this article is to illustrate how the methods of iterative Bayesian economic evaluation proposed in the literature can be incorporated into the development process of new medical devices, adapting them to face the relative scarcity of data and time that characterizes the process. A 3-stage economic evaluation was applied: an early phase in which simple methods allow for a quick prioritization of competing products; a mid-stage in which developers synthesize the data into a decision model, identify the parameters for which more information is most valuable, and explore uncertainty; and a late stage, in which all relevant information is synthesized. A retrospective analysis was conducted of the case study of absorbable pins, compared with metallic fixation, in osteotomy to treat hallux valgus. The results from the early analysis suggest absorbable pins to be cost-effective under the beliefs and assumptions applied. The outputs from the models at the mid-stage analyses show the device to be cost-effective with a high probability. Late-stage analysis synthesizes evidence from a randomized controlled trial and informative priors, which are based on previous evidence. It also suggests that absorbable pins are the most cost-effective strategy, although the uncertainty in the model output increased considerably. This example illustrates how the method proposed allows decisions in the product development cycle to be based on the best knowledge that is available at each stage.

Comparison of total costs of administering calcium polycarbophil and psyllium mucilloid in an institutional setting.

PubMed

Mamtani, R; Cimino, J A; Cooperman, J M; Kugel, R

1990-01-01

The total cost of administering calcium polycarbophil per unit dose (two tablets) was compared with that of administering psyllium mucilloid (one packet dissolved in 8 oz of water) in 20 elderly nursing-home residents. Times for printing labels, checking and initialing labels, gathering materials needed, and preparing and administering the medications were recorded during at least 50 observations in each treatment group. Total cost included nurses' and pharmacists' time, materials, and medications. Calcium polycarbophil doses were prepared and administered more quickly (mean, 49.5 sec) than psyllium mucilloid (105.3 sec). The mean cost of preparing and administering a unit dose was 28.2 for calcium polycarbophil tablets and 59.9 for psyllium mucilloid. The results suggest that the use of calcium polycarbophil tablets would save time and money in institutions in which laxatives are frequently administered.

Fast multiview three-dimensional reconstruction method using cost volume filtering

NASA Astrophysics Data System (ADS)

Lee, Seung Joo; Park, Min Ki; Jang, In Yeop; Lee, Kwan H.

2014-03-01

As the number of customers who want to record three-dimensional (3-D) information using a mobile electronic device increases, it becomes more and more important to develop a method which quickly reconstructs a 3-D model from multiview images. A fast multiview-based 3-D reconstruction method is presented, which is suitable for the mobile environment by constructing a cost volume of the 3-D height field. This method consists of two steps: the construction of a reliable base surface and the recovery of shape details. In each step, the cost volume is constructed using photoconsistency and then it is filtered according to the multiscale. The multiscale-based cost volume filtering allows the 3-D reconstruction to maintain the overall shape and to preserve the shape details. We demonstrate the strength of the proposed method in terms of computation time, accuracy, and unconstrained acquisition environment.

Estimating regional long-term economic consequences of natural hazards - a case study of the 2005 flood event in Tyrol (Austria)

NASA Astrophysics Data System (ADS)

Pfurtscheller, C.; Lochner, B.; Brucker, A.

2012-04-01

The interaction of relief-driven alpine natural processes with the anthropogenic sphere often leads to natural disasters which significantly impact on remote alpine economies. When evaluating the effects of such events for future risk prevention strategies, it is essential to assess indirect losses. While the economic measurement of direct effects - the physical impact on structures and infrastructure - seems fairly manageable, less is known about the dimensions of indirect effects, especially on a local and regional scale within the Alps. The lack of standardized terminology, empirical data and methods to estimate indirect economic effects currently hampers profound decision support. In our study of the 2005 flood event in Tyrol, we surveyed companies from all sectors of the economy to identify the main drivers of indirect effects and interrupted economic flows. In collaboration with the Federal State administration, we extrapolate the total regional economic effects of this catastrophic event. Using quantitative and qualitative methods, we established and analysed a data pool of questionnaire and interview results as well as direct loss data. We mainly focus on the decrease in value creation and the negative impacts on tourism. We observed that disrupted traffic networks can have a highly negative impact, especially for the tourism sector in lateral alpine valleys. Within a month, turnover fell by approximately EUR 3.3 million in the investigated area. In the short run (until August 2006), the shortfall in touristic revenues in the Paznaun valley aggregated to approx. EUR 5.3 million. We observed that overnight stays rebound very quickly so that long-term effects are marginal. In addition, we tried to identify possible economical losers as well as winners of severe hazard impacts. In response to such flood events, high investments are made to improve disaster and risk management. Nearly 70% of the respondents specified the (re)construction sector and similar businesses as main beneficiaries and about 40% mentioned infrastructural improvements, as in streets or protective measures, as the most positive effect. We present an empirical approach to assess the economic consequences of fatal events and provide rules of thumb to quickly estimate indirect economic losses from natural disasters, at least for the Alpine Space, at the local and regional level. The methods and results of this study can help to improve ex-post loss estimations, and with it, ex-ante methods for the cost efficiency of risk reduction measures, e.g. cost-benefit-analysis.

Effect of Exercise Program Speed, Agility, and Quickness (SAQ) in Improving Speed, Agility, and Acceleration

NASA Astrophysics Data System (ADS)

Azmi, K.; Kusnanik, N. W.

2018-01-01

This study aimed to analyze the effect of speed, agility and quickness training program to increase in speed, agility and acceleration. This study was conducted at 26 soccer players and divided into 2 groups with 13 players each group. Group 1 was given SAQ training program, and Group 2 conventional training program for 8 weeks. This study used a quantitative approach with quasi-experimental method. The design of this study used a matching-only design. Data was collected by testing 30-meter sprint (speed), agility t-test (agility), and run 10 meters (acceleration) during the pretest and posttest. Furthermore, the data was analyzed using paired sample t-test and independent t-test. The results showed: that there was a significant effect of speed, agility and quickness training program in improving in speed, agility and acceleration. In summary, it can be concluded that the speed, agility and quickness training program can improve the speed, agility and acceleration of the soccer players.

Low-cost carbon-silicon nanocomposite anodes for lithium ion batteries.

PubMed

Badi, Nacer; Erra, Abhinay Reddy; Hernandez, Francisco C Robles; Okonkwo, Anderson O; Hobosyan, Mkhitar; Martirosyan, Karen S

2014-01-01

The specific energy of the existing lithium ion battery cells is limited because intercalation electrodes made of activated carbon (AC) materials have limited lithium ion storage capacities. Carbon nanotubes, graphene, and carbon nanofibers are the most sought alternatives to replace AC materials but their synthesis cost makes them highly prohibitive. Silicon has recently emerged as a strong candidate to replace existing graphite anodes due to its inherently large specific capacity and low working potential. However, pure silicon electrodes have shown poor mechanical integrity due to the dramatic expansion of the material during battery operation. This results in high irreversible capacity and short cycle life. We report on the synthesis and use of carbon and hybrid carbon-silicon nanostructures made by a simplified thermo-mechanical milling process to produce low-cost high-energy lithium ion battery anodes. Our work is based on an abundant, cost-effective, and easy-to-launch source of carbon soot having amorphous nature in combination with scrap silicon with crystalline nature. The carbon soot is transformed in situ into graphene and graphitic carbon during mechanical milling leading to superior elastic properties. Micro-Raman mapping shows a well-dispersed microstructure for both carbon and silicon. The fabricated composites are used for battery anodes, and the results are compared with commercial anodes from MTI Corporation. The anodes are integrated in batteries and tested; the results are compared to those seen in commercial batteries. For quick laboratory assessment, all electrochemical cells were fabricated under available environment conditions and they were tested at room temperature. Initial electrochemical analysis results on specific capacity, efficiency, and cyclability in comparison to currently available AC counterpart are promising to advance cost-effective commercial lithium ion battery technology. The electrochemical performance observed for carbon soot material is very interesting given the fact that its production cost is away cheaper than activated carbon. The cost of activated carbon is about $15/kg whereas the cost to manufacture carbon soot as a by-product from large-scale milling of abundant graphite is about $1/kg. Additionally, here, we propose a method that is environmentally friendly with strong potential for industrialization.

Low-cost carbon-silicon nanocomposite anodes for lithium ion batteries

PubMed Central

2014-01-01

The specific energy of the existing lithium ion battery cells is limited because intercalation electrodes made of activated carbon (AC) materials have limited lithium ion storage capacities. Carbon nanotubes, graphene, and carbon nanofibers are the most sought alternatives to replace AC materials but their synthesis cost makes them highly prohibitive. Silicon has recently emerged as a strong candidate to replace existing graphite anodes due to its inherently large specific capacity and low working potential. However, pure silicon electrodes have shown poor mechanical integrity due to the dramatic expansion of the material during battery operation. This results in high irreversible capacity and short cycle life. We report on the synthesis and use of carbon and hybrid carbon-silicon nanostructures made by a simplified thermo-mechanical milling process to produce low-cost high-energy lithium ion battery anodes. Our work is based on an abundant, cost-effective, and easy-to-launch source of carbon soot having amorphous nature in combination with scrap silicon with crystalline nature. The carbon soot is transformed in situ into graphene and graphitic carbon during mechanical milling leading to superior elastic properties. Micro-Raman mapping shows a well-dispersed microstructure for both carbon and silicon. The fabricated composites are used for battery anodes, and the results are compared with commercial anodes from MTI Corporation. The anodes are integrated in batteries and tested; the results are compared to those seen in commercial batteries. For quick laboratory assessment, all electrochemical cells were fabricated under available environment conditions and they were tested at room temperature. Initial electrochemical analysis results on specific capacity, efficiency, and cyclability in comparison to currently available AC counterpart are promising to advance cost-effective commercial lithium ion battery technology. The electrochemical performance observed for carbon soot material is very interesting given the fact that its production cost is away cheaper than activated carbon. The cost of activated carbon is about $15/kg whereas the cost to manufacture carbon soot as a by-product from large-scale milling of abundant graphite is about $1/kg. Additionally, here, we propose a method that is environmentally friendly with strong potential for industrialization. PMID:25114651

Reducing the cost of dietary assessment: self-completed recall and analysis of nutrition for use with children (SCRAN24).

PubMed

Foster, E; Hawkins, A; Delve, J; Adamson, A J

2014-01-01

Self-Completed Recall and Analysis of Nutrition (scran24) is a prototype computerised 24-h recall system for use with 11-16 year olds. It is based on the Multiple Pass 24-h Recall method and includes prompts and checks throughout the system for forgotten food items. The development of scran24 was informed by an extensive literature review, a series of focus groups and usability testing. The first stage of the recall is a quick list where the user is asked to input all the foods and drinks they remember consuming the previous day. The quick list is structured into meals and snacks. Once the quick list is complete, additional information is collected on each food to determine food type and to obtain an estimate of portion size using digital images of food. Foods are located within the system using a free text search, which is linked to the information entered into the quick list. A time is assigned to each eating occasion using drag and drop onto a timeline. The system prompts the user if no foods or drinks have been consumed within a 3-h time frame, or if fewer than three drinks have been consumed throughout the day. The food composition code and weight (g) of all items selected are automatically allocated and stored. Nutritional information can be generated automatically via the scran24 companion Access database. scran24 was very well received by young people and was relatively quick to complete. The accuracy and precision was close to that of similar computer-based systems currently used in dietary studies. © 2013 The Authors Journal of Human Nutrition and Dietetics © 2013 The British Dietetic Association Ltd.

Aerial survey of insect-caused mortality...operation recorder gathers data quickly, cheaply

Treesearch

Steven L. Wert; Bruce Roettigering

1967-01-01

An Aerial survey using an operation recorder was made over a remote forested area of the Sierra Nevada, in central California. Data on insect-caused mortality were gathered. The survey saved several man-weeks of costly ground work that would have otherwise been required to obtain this information. The technique used proved to be an efficient and inexpensive way of...

Ouick Reaction Report on Financial Reporting Procedures for the Defense Homeowners Assistance Fund

DTIC Science & Technology

1992-12-28

FINANCE AND ACCOUNTING SERVICE REPORT NO. 93-040 SUBJECT: Quick-Reaction Report on Financial Reporting Procedures for the Defense Homeowners...General, DoD. Financial reporting includes summarizing and reclassifying program cost elements and making adjusting entries to determine financial...the FY 1992 financial statements could contain material misstatements and omissions. The goal of accounting and financial reporting is to provide

Thermal design of the space shuttle solid rocket booster

NASA Technical Reports Server (NTRS)

Fisher, R. R.; Vaniman, J. L.; Patterson, W. J.

1985-01-01

The thermal protection systems (TPS) to meet the quick turnaround and low cost required for reuse of the solid rocket booster (SRB) hardware. The TPS development considered the ease of application, changing ascent/reentry environments, and the problem of cleaning the residual insulation upon recovery. A sprayable ablator TPS material was developed. The challenges involved in design and development of this thermal system are discussed.

Addressing Counterfeit Parts in the DoD Supply Chain

DTIC Science & Technology

2014-03-01

components are genuine, given this industry’s relatively quick innovation cycles. Many active military systems were built using now-obsolete...reviews, and other activities that can delay acquisitions and increase acquisition costs. The QSLD program also enables the DSCC to use automated...case of semiconductors, many active military systems were built using now-obsolete semiconductors, the production of which was halted years, even

Strategic Implications of Cloud Computing for Modeling and Simulation (Briefing)

DTIC Science & Technology

2016-04-01

of Promises with Cloud • Cost efficiency • Unlimited storage • Backup and recovery • Automatic software integration • Easy access to information...activities that wrap the actual exercise itself (e.g., travel for exercise support, data collection, integration , etc.). Cloud -based simulation would...requiring quick delivery rather than fewer large messages requiring high bandwidth. Cloud environments tend to be better at providing high-bandwidth

Analysis of Garment Production Methods. Part 1: Comparison of Cost and Production Between a Traditional Bundle System and a Unit Production System Installation

DTIC Science & Technology

1992-01-01

fixed sequence. What made the Eton System different was that I one could very quickly, via a mechanical keypad, reprogram the sequencing of each work...possible was that this group of five workers subconsciously decided that they would themselves fullfil the needs of the increased output because they did

An integrated approach for updating cadastral maps in Pakistan using satellite remote sensing data

NASA Astrophysics Data System (ADS)

Ali, Zahir; Tuladhar, Arbind; Zevenbergen, Jaap

2012-08-01

Updating cadastral information is crucial for recording land ownership and property division changes in a timely fashioned manner. In most cases, the existing cadastral maps do not provide up-to-date information on land parcel boundaries. Such a situation demands that all the cadastral data and parcel boundaries information in these maps to be updated in a timely fashion. The existing techniques for acquiring cadastral information are discipline-oriented based on different disciplines such as geodesy, surveying, and photogrammetry. All these techniques require a large number of manpower, time, and cost when they are carried out separately. There is a need to integrate these techniques for acquiring cadastral information to update the existing cadastral data and (re)produce cadastral maps in an efficient manner. To reduce the time and cost involved in cadastral data acquisition, this study develops an integrated approach by integrating global position system (GPS) data, remote sensing (RS) imagery, and existing cadastral maps. For this purpose, the panchromatic image with 0.6 m spatial resolution and the corresponding multi-spectral image with 2.4 m spatial resolution and 3 spectral bands from QuickBird satellite were used. A digital elevation model (DEM) was extracted from SPOT-5 stereopairs and some ground control points (GCPs) were also used for ortho-rectifying the QuickBird images. After ortho-rectifying these images and registering the multi-spectral image to the panchromatic image, fusion between them was attained to get good quality multi-spectral images of these two study areas with 0.6 m spatial resolution. Cadastral parcel boundaries were then identified on QuickBird images of the two study areas via visual interpretation using participatory-GIS (PGIS) technique. The regions of study are the urban and rural areas of Peshawar and Swabi districts in the Khyber Pakhtunkhwa province of Pakistan. The results are the creation of updated cadastral maps with a lot of cadastral information which can be used in updating the existing cadastral data with less time and cost.

Repeated quick hot-and-chilling treatments for the inactivation of Escherichia coli O157:H7 in mung bean and radish seeds.

PubMed

Bari, Md Latiful; Sugiyama, Jun; Kawamoto, Shinnichi

2009-01-01

The majority of the seed sprout-related outbreaks have been associated with Escherichia coli O157:H7. Therefore, it is necessary to find an effective method to inactivate these organisms on the seeds prior to sprouting. This study was conducted to assess the effectiveness of repeated quick hot-and-chilling treatments with various chemicals to inactivate E. coli O157:H7 populations inoculated onto mung bean and radish seeds intended for sprout production and to determine the effect of these treatments on seed germination. The treatment time was 20 sec for quick hot and 20 sec for quick chilling in one repeat. Likewise up to five repeats were done throughout the experiments. The chemicals used for this study were electrolyzed acidic (EO) water, phytic acid (0.05%), oxalic acid (3%), surfcera(R), and alpha-torino water(R), and distilled water was used as control. The quick hot treatment was done with 75 degrees C, 70 degrees C, and 60 degrees C, and the chilling temperature was 0 degrees C. The treated seeds were then assessed for the efficacy of this treatment in reducing populations of the pathogens and the effects of repeated quick hot-and-chilling treatments on germination yield. It was found that repeating treatment at 75 degrees C for two or three repeats with phytic acid and oxalic acid could reduce 4.38-log colony-forming unit (CFU)/g of E. coli O157:H7 in mung bean seeds. EO water and distilled water were found equally effective at 75 degrees C for four or five repeats to inactivate E. coli O157:H7 in mung bean seeds. However, alpha-torino water(R) and surfcera(R) were not found effective in comparison to other sanitizers used in this experiment. Irrespective of sanitizer used, the germination yield of the mung bean seed was not affected significantly. On the other hand, distilled water, EO water, and alpha-torino water(R) at 75 degrees C for five repeats were found effective in reducing 5.80-log CFU/g of E. coli O157:H7 in radish seeds; however, the germination yield of the seed was affected significantly. Therefore, repeated quick hot-and-chilling treatments could be useful to decontaminate mung bean seeds intended for sprout production.

The minicell TMirradiator: A new system for a new market

NASA Astrophysics Data System (ADS)

Clouser, James F.; Beers, Eric W.

1998-06-01

Since the commissioning of the first industrial Gamma Irradiator design, designers and operators of irradiation systems have been attempting to meet the specific production requirements and challenges presented to them. This objective has resulted in many different versions of irradiators currently in service today, all of which had original charters and many of which still perform very well within even the new requirements of this industry. Continuing changes in the marketplace have, however, placed pressures on existing designs due to a combination of changing dose requirements for sterlization, increased economic pressures from the specific industry served for both time and location and the increasing variety of product types requiring processing. Additionally, certain market areas which could never economically support a typical gamma processing facility have either not been serviced, or have forced potential gamma users to transport product long distances to one of these existing facilities. The MiniCell TM removes many of the traditional barriers previously accepted in the radiation processing industry for building a processing facility in a location. Its reduced size and cost have allowed many potential users to consider in-house processing and its ability to be quickly assembled allow it to meet market needs in a much more timely fashion than the previous designs. The MiniCell system can cost effectively meet many of the current market needs of reducing total cost of processing and also be flexible enough to process product in a wide range of industries effectively.

Loop-mediated isothermal amplification (LAMP) assays for the species-specific detection of Eimeria that infect chickens

PubMed Central

2011-01-01

Background Eimeria parasites can cause the disease coccidiosis in poultry and even subclinical infection can incur economic loss. Diagnosis of infection predominantly relies on traditional techniques including lesion scoring and faecal microscopy despite the availability of sensitive molecular assays, largely due to cost and the requirement for specialist equipment. Despite longstanding proven efficacy these traditional techniques demand time and expertise, can be highly subjective and may under-diagnose subclinical disease. Recognition of the tight economic margins prevailing in modern poultry production and the impact of avian coccidiosis on poverty in many parts of the world has highlighted a requirement for a panel of straightforward and sensitive, but cost-effective, Eimeria species-specific diagnostic assays. Results Loop-mediated isothermal amplification (LAMP) is an uncomplicated, quick and relatively inexpensive diagnostic tool. In this study we have developed a panel of species-specific LAMP assays targeting the seven Eimeria species that infect the chicken. Each assay has been shown to be genuinely species-specific with the capacity to detect between one and ten eimerian genomes, equivalent to less than a single mature schizont. Development of a simple protocol for template DNA preparation from tissue collected post mortem with no requirement for specialist laboratory equipment supports the use of these assays in routine diagnosis of eimerian infection. Preliminary field testing supports this hypothesis. Conclusions Development of a panel of sensitive species-specific LAMP assays introduces a valuable new cost-effective tool for use in poultry husbandry. PMID:22053893

Chronic obstructive pulmonary disease - quick-relief drugs

MedlinePlus

... away if you have this side effect. Oral Steroids Oral steroids (also called corticosteroids) are medicines you take by ... might have to take them for longer. Oral steroids include: Methylprednisolone Prednisone Prednisolone Alternative Names COPD - quick- ...

EPA QUICK REFERENCE GUIDES

EPA Science Inventory

EPA Quick Reference Guides are compilations of information on chemical and biological terrorist agents. The information is presented in consistent format and includes agent characteristics, release scenarios, health and safety data, real-time field detection, effect levels, samp...

A preferred provider organization (PPO) case study for mental health and substance abuse.

PubMed

Gomillion, I; Self, D R

1988-01-01

The Preferred Provider Organization concept is quickly becoming more popular because of its relative cost-effectiveness and recent successes. Managed care through means of this mental health and substance abuse PPO may well serve as the prototype for the general health care cost containment efforts of the future for the self-insured insurance plans for Alabama state employees and teachers. The first year also revealed several problems in the original proposal especially with respect to the unintended attractiveness of inpatient/residential care. Consequently, copayment plans were added to dissuade unnecessary lengthy stays (see Table 2). Second, a new quality assurance mechanism has been added to further evaluate the need for admissions to facilities, as well as for the need for continued inpatient treatment. The Alabama Quality Assurance Foundation (AQAF) began on January 1, 1988, conducting the preadmission certification on all admissions based upon criteria established jointly by AQAF and the PPO providers. In addition, AQAF will conduct continuing stay reviews at predetermined time periods to ensure that continued treatment in an inpatient setting is indeed necessary.

The emerging role for robotics in cholecystectomy: the dawn of a new era?

PubMed Central

Zaman, Jessica A.

2018-01-01

Though laparoscopic cholecystectomy (LC) was highly criticized in its early stages, it quickly grew to become a new standard of care and has revolutionized the field of general surgery. Now emerging robotic technology is making its way into the minimally invasive arena. Robotic cholecystectomy (RC) is often disparaged as a costly technology that can lead to increased operative times with outcomes that are quite similar to LC. However, this perspective is skewed as many existing studies were performed in the early phase of learning for this procedure. RC can be performed in a cost-effective manner as the volume of robotic procedures increases. In addition, improved visualization and capability to perform fluorescence cholangiography can improve the safety profile of cholecystectomy to a level that has not yet been achieved with conventional laparoscopy. Advanced simulation technology for robotic surgery, and newer single-site robotic platforms have the potential to further revolutionize this technology and lead to improved patient satisfaction. In this review, we will present current data, trends, and controversies in robotic-assisted cholecystectomy. PMID:29531940

Additive manufacturing of patient-specific tubular continuum manipulators

NASA Astrophysics Data System (ADS)

Amanov, Ernar; Nguyen, Thien-Dang; Burgner-Kahrs, Jessica

2015-03-01

Tubular continuum robots, which are composed of multiple concentric, precurved, elastic tubes, provide more dexterity than traditional surgical instruments at the same diameter. The tubes can be precurved such that the resulting manipulator fulfills surgical task requirements. Up to now the only material used for the component tubes of those manipulators is NiTi, a super-elastic shape-memory alloy of nickel and titan. NiTi is a cost-intensive material and fabrication processes are complex, requiring (proprietary) technology, e.g. for shape setting. In this paper, we evaluate component tubes made of 3 different thermoplastic materials (PLA, PCL and nylon) using fused filament fabrication technology (3D printing). This enables quick and cost-effective production of custom, patient-specific continuum manipulators, produced on site on demand. Stress-strain and deformation characteristics are evaluated experimentally for 16 fabricated tubes of each thermoplastic with diameters and shapes equivalent to those of NiTi tubes. Tubes made of PCL and nylon exhibit properties comparable to those made of NiTi. We further demonstrate a tubular continuum manipulator composed of 3 nylon tubes in a transnasal, transsphenoidal skull base surgery scenario in vitro.

Contribution of the GAVI Alliance to improving health and reducing poverty.

PubMed

Lob-Levyt, Julian

2011-10-12

The Global Alliance for Vaccines and Immunization (GAVI), now 10 years old, was established as a successful and innovative public-private partnership to deal with a fundamental inequity. The poorest children in the poorest parts of the world were being denied access to life-saving vaccines simply on the basis of cost. GAVI has been successful in mobilizing significant funding from donors and through innovative financing instruments, immunizing large numbers of children. GAVI has been less successful, at least in the time frames first envisaged, at quickly reducing the prices of new and under-used vaccines to levels affordable by the poorest countries. Vaccines remain some of the most cost effective of public health interventions. As GAVI seeks to introduce a new set of vaccines to tackle major killers such as pneumonia and diarrhoea, and emerging threats such as cervical cancer, it needs to raise significant additional funds. There is no single solution. Multiple and new instruments will be required to raise finance both globally and at the country level, and also to incentivize industry and others to provide vaccines at affordable prices to the poorest countries.

Cost Model Comparison: A Study of Internally and Commercially Developed Cost Models in Use by NASA

NASA Technical Reports Server (NTRS)

Gupta, Garima

2011-01-01

NASA makes use of numerous cost models to accurately estimate the cost of various components of a mission - hardware, software, mission/ground operations - during the different stages of a mission's lifecycle. The purpose of this project was to survey these models and determine in which respects they are similar and in which they are different. The initial survey included a study of the cost drivers for each model, the form of each model (linear/exponential/other CER, range/point output, capable of risk/sensitivity analysis), and for what types of missions and for what phases of a mission lifecycle each model is capable of estimating cost. The models taken into consideration consisted of both those that were developed by NASA and those that were commercially developed: GSECT, NAFCOM, SCAT, QuickCost, PRICE, and SEER. Once the initial survey was completed, the next step in the project was to compare the cost models' capabilities in terms of Work Breakdown Structure (WBS) elements. This final comparison was then portrayed in a visual manner with Venn diagrams. All of the materials produced in the process of this study were then posted on the Ground Segment Team (GST) Wiki.

DupuytrEn Treatment EffeCtiveness Trial (DETECT): a protocol for prospective, randomised, controlled, outcome assessor-blinded, three-armed parallel 1:1:1, multicentre trial comparing the effectiveness and cost of collagenase clostridium histolyticum, percutaneous needle fasciotomy and limited fasciectomy as short-term and long-term treatment strategies in Dupuytren's contracture.

PubMed

Räisänen, Mikko P; Karjalainen, Teemu; Göransson, Harry; Reito, Aleksi; Kautiainen, Hannu; Malmivaara, Antti; Leppänen, Olli V

2018-03-28

Dupuytren's contracture (DC) is a chronic fibroproliferative disorder of the palmar fascia which leads to flexion contracture in one or more fingers. There is no definitive cure for DC, and treatment aims at relieving symptoms by releasing the contracture using percutaneous or operative techniques. We planned a prospective, randomised, controlled, outcome assessor-blinded, three-armed parallel 1:1:1, multicentre trial comparing the effectiveness and cost of (1) collagenase clostridium histolyticum injection followed by limited fasciectomy in non-responsive cases, (2) percutaneous needle fasciotomy followed by limited fasciectomy in non-responsive cases and (3) primary limited fasciectomy during short-term and long-term follow-up for Tubiana I-III stages DC. We will recruit participants from seven national centres in Finland. Primary outcome is the rate of success in the treatment arm at 5 years after recruitment. Success is a composite outcome comprising (1) at least 50% contracture release from the date of recruitment and (2) participants in a patient-accepted symptom state (PASS). Secondary outcomes are (1) angle of contracture, (2) quick disabilities of the arm, a shoulder and hand outcome measure (QuickDASH), (3) perceived hand function, (4) EQ-5D-3L, (5) rate of major adverse events, (6) patient's trust of the treatment, (7) global rating, (8) rate of PASS, (9) rate of minimal clinically important improvement, (10) expenses, (11) progression of disease, (12) progression-free survival, (13) favoured treatment modality, (14) patients achieving full contracture release and >50% improvement and (15) patient satisfaction with the treatment effect. Predictive factors for achieving the PASS will also be analysed. The protocol was approved by the Tampere University Hospital Institutional Review Board and Finnish Medicine Agency. The study will be performed according to the principles of good clinical practice. The results of the trial will be disseminated as published articles in peer-reviewed journals. NCT03192020; Pre-results. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Cancer Detection Using Neural Computing Methodology

NASA Technical Reports Server (NTRS)

Toomarian, Nikzad; Kohen, Hamid S.; Bearman, Gregory H.; Seligson, David B.

2001-01-01

This paper describes a novel learning methodology used to analyze bio-materials. The premise of this research is to help pathologists quickly identify anomalous cells in a cost efficient method. Skilled pathologists must methodically, efficiently and carefully analyze manually histopathologic materials for the presence, amount and degree of malignancy and/or other disease states. The prolonged attention required to accomplish this task induces fatigue that may result in a higher rate of diagnostic errors. In addition, automated image analysis systems to date lack a sufficiently intelligent means of identifying even the most general regions of interest in tissue based studies and this shortfall greatly limits their utility. An intelligent data understanding system that could quickly and accurately identify diseased tissues and/or could choose regions of interest would be expected to increase the accuracy of diagnosis and usher in truly automated tissue based image analysis.

Early-Stage Capital Cost Estimation of Biorefinery Processes: A Comparative Study of Heuristic Techniques.

PubMed

Tsagkari, Mirela; Couturier, Jean-Luc; Kokossis, Antonis; Dubois, Jean-Luc

2016-09-08

Biorefineries offer a promising alternative to fossil-based processing industries and have undergone rapid development in recent years. Limited financial resources and stringent company budgets necessitate quick capital estimation of pioneering biorefinery projects at the early stages of their conception to screen process alternatives, decide on project viability, and allocate resources to the most promising cases. Biorefineries are capital-intensive projects that involve state-of-the-art technologies for which there is no prior experience or sufficient historical data. This work reviews existing rapid cost estimation practices, which can be used by researchers with no previous cost estimating experience. It also comprises a comparative study of six cost methods on three well-documented biorefinery processes to evaluate their accuracy and precision. The results illustrate discrepancies among the methods because their extrapolation on biorefinery data often violates inherent assumptions. This study recommends the most appropriate rapid cost methods and urges the development of an improved early-stage capital cost estimation tool suitable for biorefinery processes. © 2015 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

Cross-linguistic evidence for memory storage costs in filler-gap dependencies with wh-adjuncts

PubMed Central

Stepanov, Arthur; Stateva, Penka

2015-01-01

This study investigates processing of interrogative filler-gap dependencies in which the filler integration site or gap is not directly subcategorized by the verb. This is the case when the wh-filler is a structural adjunct such as how or when rather than subject or object. Two self-paced reading experiments in English and Slovenian provide converging cross-linguistic evidence that wh-adjuncts elicit a kind of memory storage cost similar to that previously shown in the literature for wh-arguments. Experiment 1 investigates the storage costs elicited by the adjunct when in Slovenian, and Experiment 2 the storage costs elicited by how quickly and why in English. The results support the class of theories of storage costs based on the metric in terms of incomplete phrase structure rules or incomplete syntactic head predictions. We also demonstrate that the endpoint of the storage cost for a wh-adjunct filler provides valuable processing evidence for its base structural position, the identification of which remains a rather murky issue in current grammatical research. PMID:26388806

Expanding the scope of psychiatric nursing practice: devaluing the essence of psychiatric nursing?

PubMed

Hogan, Beverly Kay

2012-09-01

Psychiatric Nurse Practitioners are quickly becoming sought after employees, especially in public mental health systems where a shrinking number of psychiatrists necessitate alternate access to prescribers. In addition, new guidelines necessitate greater attention to the follow up and monitoring of the medical problems of psychiatric patients. These events are occurring in the midst of declining reimbursement and rising litigation concerns in psychiatry. At the same time there is an increased focus on a recovery orientation to psychiatry alongside the primacy of psychotropic medicine as the most cost effective treatment, which can become competing aims for practitioners. It is important for psychiatric nurses and psychiatric nurse practitioners to consider how these opportunities might also have a negative impact on the core foundation of psychiatric nursing.

Generation of knockout rabbits using transcription activator-like effector nucleases.

PubMed

Wang, Yu; Fan, Nana; Song, Jun; Zhong, Juan; Guo, Xiaogang; Tian, Weihua; Zhang, Quanjun; Cui, Fenggong; Li, Li; Newsome, Philip N; Frampton, Jon; Esteban, Miguel A; Lai, Liangxue

2014-01-01

Zinc-finger nucleases and transcription activator-like effector nucleases are novel gene-editing platforms contributing to redefine the boundaries of modern biological research. They are composed of a non-specific cleavage domain and a tailor made DNA-binding module, which enables a broad range of genetic modifications by inducing efficient DNA double-strand breaks at desired loci. Among other remarkable uses, these nucleases have been employed to produce gene knockouts in mid-size and large animals, such as rabbits and pigs, respectively. This approach is cost effective, relatively quick, and can produce invaluable models for human disease studies, biotechnology or agricultural purposes. Here we describe a protocol for the efficient generation of knockout rabbits using transcription activator-like effector nucleases, and a perspective of the field.

A systematic review of the clinical, public health and cost-effectiveness of rapid diagnostic tests for the detection and identification of bacterial intestinal pathogens in faeces and food.

PubMed

Abubakar, I; Irvine, L; Aldus, C F; Wyatt, G M; Fordham, R; Schelenz, S; Shepstone, L; Howe, A; Peck, M; Hunter, P R

2007-09-01

To determine the diagnostic accuracy of tests for the rapid diagnosis of bacterial food poisoning in clinical and public health practice and to estimate the cost-effectiveness of these assays in a hypothetical population in order to inform policy on the use of these tests. Studies evaluating diagnostic accuracy of rapid tests were retrieved using electronic databases and handsearching reference lists and key journals. Hospital laboratories and test manufacturers were contacted for cost data, and clinicians involved in the care of patients with food poisoning were invited to discuss the conclusions of this review using the nominal group technique. A systematic review of the current medical literature on assays used for the rapid diagnosis of bacterial food poisoning was carried out. Specific organisms under review were Salmonella, Campylobacter, Escherichia coli O157, Staphylococcus aureus, Clostridium perfringens and Bacillus cereus. Data extraction was undertaken using standardised data extraction forms. Where a sufficient number of studies evaluating comparable tests were identified, meta-analysis was performed. A decision analytic model was developed, using effectiveness data from the review and cost data from hospitals and manufacturers, which contributed to an assessment of the cost-effectiveness of rapid tests in a hypothetical UK population. Finally, diagnostic accuracy and cost-effectiveness results were presented to a focus group of GPs, microbiologists and consultants in communicable disease control, to assess professional opinion on the use of rapid tests in the diagnosis of food poisoning. Good test performance levels were observed with rapid test methods, especially for polymerase chain reaction (PCR) assays. The estimated levels of diagnostic accuracy using the area under the curve of the summary receiver operating characteristic curve was very high. Indeed, although traditional culture is the natural reference test to use for comparative statistical analysis, on many occasions the rapid test outperforms culture, detecting additional 'truly' positive cases of food-borne illness. The significance of these additional positives requires further investigation. Economic modelling suggests that adoption of rapid tests in combination with routine culture is unlikely to be cost-effective, however, as the cost of rapid technologies decreases; total replacement with rapid technologies may be feasible. Despite the relatively poor quality of reporting of studies evaluating rapid detection methods, the reviewed evidence shows that PCR for Campylobacter, Salmonella and E. coli O157 is potentially very successful in identifying pathogens, possibly detecting more than the number currently reported using culture. Less is known about the benefits of testing for B. cereus, C. perfringens and S. aureus. Further investigation is needed on how clinical outcomes may be altered if test results are available more quickly and at a greater precision than in the current practice of bacterial culture.

Development and evaluation of a low-cost and high-capacity DICOM image data storage system for research.

PubMed

Yakami, Masahiro; Ishizu, Koichi; Kubo, Takeshi; Okada, Tomohisa; Togashi, Kaori

2011-04-01

Thin-slice CT data, useful for clinical diagnosis and research, is now widely available but is typically discarded in many institutions, after a short period of time due to data storage capacity limitations. We designed and built a low-cost high-capacity Digital Imaging and COmmunication in Medicine (DICOM) storage system able to store thin-slice image data for years, using off-the-shelf consumer hardware components, such as a Macintosh computer, a Windows PC, and network-attached storage units. "Ordinary" hierarchical file systems, instead of a centralized data management system such as relational database, were adopted to manage patient DICOM files by arranging them in directories enabling quick and easy access to the DICOM files of each study by following the directory trees with Windows Explorer via study date and patient ID. Software used for this system was open-source OsiriX and additional programs we developed ourselves, both of which were freely available via the Internet. The initial cost of this system was about $3,600 with an incremental storage cost of about $900 per 1 terabyte (TB). This system has been running since 7th Feb 2008 with the data stored increasing at the rate of about 1.3 TB per month. Total data stored was 21.3 TB on 23rd June 2009. The maintenance workload was found to be about 30 to 60 min once every 2 weeks. In conclusion, this newly developed DICOM storage system is useful for research due to its cost-effectiveness, enormous capacity, high scalability, sufficient reliability, and easy data access.

A low-cost PC-based telemetry data-reduction system

NASA Astrophysics Data System (ADS)

Simms, D. A.; Butterfield, C. P.

1990-04-01

The Solar Energy Research Institute's (SERI) Wind Research Branch is using Pulse Code Modulation (PCM) telemetry data-acquisition systems to study horizontal-axis wind turbines. PCM telemetry systems are used in test installations that require accurate multiple-channel measurements taken from a variety of different locations. SERI has found them ideal for use in tests requiring concurrent acquisition of data-reduction system to facilitate quick, in-the-field multiple-channel data analysis. Called the PC-PCM System, it consists of two basic components. First, AT-compatible hardware boards are used for decoding and combining PCM data streams. Up to four hardware boards can be installed in a single PC, which provides the capability to combine data from four PCM streams directly to PC disk or memory. Each stream can have up to 62 data channels. Second, a software package written for the DOS operating system was developed to simplify data-acquisition control and management. The software provides a quick, easy-to-use interface between the PC and PCM data streams. Called the Quick-Look Data Management Program, it is a comprehensive menu-driven package used to organize, acquire, process, and display information from incoming PCM data streams. This paper describes both hardware and software aspects of the SERI PC-PCM system, concentrating on features that make it useful in an experiment test environment to quickly examine and verify incoming data. Also discussed are problems and techniques associated with PC-based telemetry data acquisition, processing, and real-time display.

New Air-Launched Small Missile (ALSM) Flight Testbed for Hypersonic Systems

NASA Technical Reports Server (NTRS)

Bui, Trong T.; Lux, David P.; Stenger, Michael T.; Munson, Michael J.; Teate, George F.

2007-01-01

The Phoenix Air-Launched Small Missile (ALSM) flight testbed was conceived and is proposed to help address the lack of quick-turnaround and cost-effective hypersonic flight research capabilities. The Phoenix ALSM testbed results from utilization of the United States Navy Phoenix AIM-54 (Hughes Aircraft Company, now Raytheon Company, Waltham, Massachusetts) long-range, guided air-to-air missile and the National Aeronautics and Space Administration (NASA) Dryden Flight Research Center (Edwards, California) F-15B (McDonnell Douglas, now the Boeing Company, Chicago, Illinois) testbed airplane. The retirement of the Phoenix AIM-54 missiles from fleet operation has presented an opportunity for converting this flight asset into a new flight testbed. This cost-effective new platform will fill the gap in the test and evaluation of hypersonic systems for flight Mach numbers ranging from 3 to 5. Preliminary studies indicate that the Phoenix missile is a highly capable platform; when launched from a high-performance airplane, the guided Phoenix missile can boost research payloads to low hypersonic Mach numbers, enabling flight research in the supersonic-to-hypersonic transitional flight envelope. Experience gained from developing and operating the Phoenix ALSM testbed will assist the development and operation of future higher-performance ALSM flight testbeds as well as responsive microsatellite-small-payload air-launched space boosters.

New Air-Launched Small Missile (ALSM) Flight Testbed for Hypersonic Systems

NASA Technical Reports Server (NTRS)

Bui, Trong T.; Lux, David P.; Stenger, Mike; Munson, Mike; Teate, George

2006-01-01

A new testbed for hypersonic flight research is proposed. Known as the Phoenix air-launched small missile (ALSM) flight testbed, it was conceived to help address the lack of quick-turnaround and cost-effective hypersonic flight research capabilities. The Phoenix ALSM testbed results from utilization of two unique and very capable flight assets: the United States Navy Phoenix AIM-54 long-range, guided air-to-air missile and the NASA Dryden F-15B testbed airplane. The U.S. Navy retirement of the Phoenix AIM-54 missiles from fleet operation has presented an excellent opportunity for converting this valuable flight asset into a new flight testbed. This cost-effective new platform will fill an existing gap in the test and evaluation of current and future hypersonic systems for flight Mach numbers ranging from 3 to 5. Preliminary studies indicate that the Phoenix missile is a highly capable platform. When launched from a high-performance airplane, the guided Phoenix missile can boost research payloads to low hypersonic Mach numbers, enabling flight research in the supersonic-to-hypersonic transitional flight envelope. Experience gained from developing and operating the Phoenix ALSM testbed will be valuable for the development and operation of future higher-performance ALSM flight testbeds as well as responsive microsatellite small-payload air-launched space boosters.

Bio-production of Baccatin III, an Important Precursor of Paclitaxel by a Cost-Effective Approach.

PubMed

Lin, Shu-Ling; Wei, Tao; Lin, Jun-Fang; Guo, Li-Qiong; Wu, Guang-Pei; Wei, Jun-Bin; Huang, Jia-Jun; Ouyang, Ping-Lan

2018-07-01

Natural production of anti-cancer drug taxol from Taxus has proved to be environmentally unsustainable and economically unfeasible. Currently, bioengineering the biosynthetic pathway of taxol is an attractive alternative production approach. 10-deacetylbaccatin III-10-O-acetyl transferase (DBAT) was previously characterized as an acyltransferase, using 10-deacetylbaccatin III (10-DAB) and acetyl CoA as natural substrates, to form baccatin III in the taxol biosynthesis. Here, we report that other than the natural acetyl CoA (Ac-CoA) substrate, DBAT can also utilize vinyl acetate (VA), which is commercially available at very low cost, acylate quickly and irreversibly, as acetyl donor in the acyl transfer reaction to produce baccatin III. Furthermore, mutants were prepared via a semi-rational design in this work. A double mutant, I43S/D390R was constructed to combine the positive effects of the different single mutations on catalytic activity, and its catalytic efficiency towards 10-DAB and VA was successfully improved by 3.30-fold, compared to that of wild-type DBAT, while 2.99-fold higher than the catalytic efficiency of WT DBAT towards 10-DAB and Ac-CoA. These findings can provide a promising economically and environmentally friendly method for exploring novel acyl donors to engineer natural product pathways.

Identification of spider-mite species and their endosymbionts using multiplex PCR.

PubMed

Zélé, Flore; Weill, Mylène; Magalhães, Sara

2018-02-01

Spider mites of the genus Tetranychidae are severe crop pests. In the Mediterranean a few species coexist, but they are difficult to identify based on morphological characters. Additionally, spider mites often harbour several species of endosymbiotic bacteria, which may affect the biology of their hosts. Here, we propose novel, cost-effective, multiplex diagnostic methods allowing a quick identification of spider-mite species as well as of the endosymbionts they carry. First, we developed, and successfully multiplexed in a single PCR, primers to identify Tetranychus urticae, T. evansi and T. ludeni, some of the most common tetranychids found in southwest Europe. Moreover, we demonstrated that this method allows detecting multiple species in a single pool, even at low frequencies (up to 1/100), and can be used on entire mites without DNA extraction. Second, we developed another set of primers to detect spider-mite endosymbionts, namely Wolbachia, Cardinium and Rickettsia in a multiplex PCR, along with a generalist spider-mite primer to control for potential failure of DNA amplification in each PCR. Overall, our method represents a simple, cost-effective and reliable method to identify spider-mite species and their symbionts in natural field populations, as well as to detect contaminations in laboratory rearings. This method may easily be extended to other species.

Analytical Model For Fluid Dynamics In A Microgravity Environment

NASA Technical Reports Server (NTRS)

Naumann, Robert J.

1995-01-01

Report presents analytical approximation methodology for providing coupled fluid-flow, heat, and mass-transfer equations in microgravity environment. Experimental engineering estimates accurate to within factor of 2 made quickly and easily, eliminating need for time-consuming and costly numerical modeling. Any proposed experiment reviewed to see how it would perform in microgravity environment. Model applied in commercial setting for preliminary design of low-Grashoff/Rayleigh-number experiments.

A Commander’s Quick Reference Manual for Legal Issues.

DTIC Science & Technology

1998-04-01

special infrequent occasions such as child birth , marriage, retirement, a gift appropriate for the occasion may be given. GROUP GIFTS: Authorized for...Chapter VI REPORTING REQUIREMENT: If DON assets are requested, permission must come from SECNAV or SECNAV designee. If approved, cost recovery for DON...pregnancy. Generally requests will normally be granted unless compelling needs of the service exist. After birth of the child, other bases for

A Commander’s Quick Reference Manual for Legal Issues.

DTIC Science & Technology

1997-08-01

occasions such as child birth , marriage, retirement. Gift appropriate for the occasion may be given. GROUP GIFTS: Authorized for special infrequent occasions...REPORTING REQUIREMENT: If DON assets are requested, permission must come from SECNAVor SECNAVdesignee. If approved, cost recovery for DON is required...will normally be granted unless compelling needs of the service exist. After birth of the child, other bases for administrative separation may apply (e.g

Computational Modeling of the Dielectric Barrier Discharge (DBD) Device for Aeronautical Applications

DTIC Science & Technology

2006-06-01

electron energy equation are solved semi-implicitly in a sequential manner. Each of the governing equations is solved by casting them onto a tridiagonal ...actuator for different device configurations and operating parameters. This will provide the Air Force with a low cost, quick turn around...Atmosphere (ATM) (20:8). Initially, the applied potential difference on the electrodes must be great enough to initiate gas breakdown. While

Assistance Focus: Africa (Brochure)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Clean Energy Solutions Center Ask an Expert service connects governments seeking policy information and advice with one of more than 30 global policy experts who can provide reliable and unbiased quick-response advice and information. The service is available at no cost to government agency representatives from any country and the technical institutes assisting them. This publication presents summaries of assistance provided to African governments, including the benefits of that assistance.

Assistance Focus: Latin America/Caribbean (Brochure)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Clean Energy Solutions Center Ask an Expert service connects governments seeking policy information and advice with one of more than 30 global policy experts who can provide reliable and unbiased quick-response advice and information. The service is available at no cost to government agency representatives from any country and the technical institutes assisting them. This publication presents summaries of assistance provided to African governments, including the benefits of that assistance.

Robots on the Battlefield. Contemporary Perspectives and Implications for the Future

DTIC Science & Technology

2014-01-01

is irreplaceable. This may, for example, involve the robot exploring an inaccessible environment or one presenting a significant risk ( contaminated ... contamination , etc.), and the high rate of attrition that it is logically ex- pected to undergo must not cause any problems in terms of cost.19 This quick...surveillance, the identification and designation of targets, neutralizing explosive devices, and reconnaissance in contaminated , polluted or booby

Emerging Technologies for the Remediation of Metals in Soils, Insitu Stabilization/Inplace Inactivation

DTIC Science & Technology

1997-12-01

implement, they may also serve as interim measures for reducing risk prior to subsequent phytoremediation or remediation by other techniques. 2.0...are essentially non-leachable and pass leachate and TCLP testing protocols. 2.6 Time Requirements Most of the stabilization techniques mentioned above...site. In addition to the attractive low cost of both phytoremediation techniques, these techniques may also be less invasive and more quickly

Falling from the top: the fired physician executive.

PubMed

Coile, R C; Tyler, J L

2000-01-01

Today's health care market is volatile, and the job of a physician executive is becoming more risky. Recognizing signs of trouble and taking immediate action is essential. Ten early warning signs that you could be fired are: (1) Net profits dip unexpectedly; (2) investment income can't cover operating losses; (3) bond rating is downgraded; (4) revenues are not rising as fast as costs; (5) senior executives leave the team; (6) wage increases don't improve nursing vacancy rate; (7) unions begin whisper campaign; (8) medical staff elect an SOB; (9) hospital is slapped with a costly lawsuit; and (10) recruiters call to check on your status. Physician executives are quickly learning what it takes to overcome tough challenges and prevent premature job termination: Communication; no-surprise performance; continuous monitoring of key indicators; openness and plain talk; and no-more-business-as-usual attitude. What can you do to make your job loss as painless as possible? (1) Negotiate a contract upfront; (2) don't lose your temper; (3) ask for your wish list quickly; (4) be reluctant to sue your former employer; (5) tell your family as soon as possible; (6) take only a brief vacation; (7) consider a temporary assignment; (8) be prepared to be re-employed by your former employer; and (9) keep a positive attitude.

Biofuels from Bacteria Is PNNL Biochemist’s Goal (DOE Pulse Profile)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wiley, Julie G.; Manke, Kristin L.

When you ask Mary Lipton what her strengths are, she quickly responds with her personality type. 'I'm an Expressive,' she says, aptly punctuating her words with her hands. 'The plus side is that I communicate and collaborate well, and I look at the bigger picture. On the other hand, I don't concentrate on details. But I can incorporate the details into a larger vision.' Regardless of how they are perceived, these traits have served Lipton well as a scientist at Pacific Northwest National Laboratory. She's nationally recognized for applying new mass spectrometry-based technologies to characterize environmental microbes and microbial communities,more » particularly for their use in generating biofuels. 'I work on biofuels because at some point, everyone pays for the high cost of fuel. It affects all of us, whether directly at the gas pump or by higher food and materials costs,' says Lipton. Lipton categorizes her biofuels research area as environmental proteomics, which she defines as the application of advanced protein-based techniques to understanding environmental and biological systems. But she's quick to note that environmental proteomics doesn't just aid development of new biofuels, but also helps further understanding of the impact of climate change and the use of organisms for bioremediation.« less

Analyzing the costs to deliver medication therapy management services.

PubMed

Rupp, Michael T

2011-01-01

To provide pharmacy managers and consultant pharmacists with a step-by-step approach for analyzing of the costs of delivering medication therapy management (MTM) services and to describe use of a free online software application for determining costs of delivering MTM. The process described is applicable to community pharmacies and consultant pharmacists who provide MTM services from nonpharmacy settings. The PharmAccount Service Cost Calculator is an Internet- based software application that uses a guided online interview to collect information needed to conduct a comprehensive cost analysis of any specialized pharmacy service. In addition to direct variable and fixed costs, the software automatically allocates indirect and overhead costs to the service and generates an itemized report that details the components of service delivery costs. The service cost calculator is sufficiently flexible to support the analysis of virtually any specialized pharmacy service, irrespective of whether the service is being delivered from a physical pharmacy. The software application allows users to perform sensitivity analysis to quickly determine the potential impact that alternate scenarios would have on service delivery cost. It is therefore particularly well suited to assist in the design and planning of a new pharmacy service. Good management requires that the cost implications of service delivery decisions are known and considered. Analyzing the cost of an MTM service is an important step in developing a sustainable business model.

The National Shipbuilding Research Program. Development of a Quick TBT Analytical Method

DTIC Science & Technology

2000-08-16

Development of a Quick TBT Analytical Method 09/25/2000 Page 3 of 38 Executive Summary Concern about the toxic effect of tributyltin have caused the...paints, developed in the 1960s, contains the organotin tributyltin ( TBT ), which has been proven to cause deformations in oysters and sex changes in...measured response (area counts) for tributyltin in deionized distilled water. Final Report – Development of a Quick TBT Analytical Method 09/25/2000

Essays on wholesale auctions in deregulated electricity markets

NASA Astrophysics Data System (ADS)

Baltaduonis, Rimvydas

2007-12-01

The early experience in the restructured electric power markets raised several issues, including price spikes, inefficiency, security, and the overall relationship of market clearing prices to generation costs. Unsatisfactory outcomes in these markets are thought to have resulted in part from strategic generator behaviors encouraged by inappropriate market design features. In this dissertation, I examine the performance of three auction mechanisms for wholesale power markets - Offer Cost Minimization auction, Payment Cost Minimization auction and Simple-Offer auction - when electricity suppliers act strategically. A Payment Cost Minimization auction has been proposed as an alternative to the traditional Offer Cost Minimization auction with the intention to solve the problem of inflated wholesale electricity prices. Efficiency concerns for this proposal were voiced due to insights predicated on the assumption of true production cost revelation. Using a game theoretic approach and an experimental method, I compare the two auctions, strictly controlling for the level of unilateral market power. A specific feature of these complex-offer auctions is that the sellers submit not only the quantities and the minimum prices that they are willing to sell at, but also the start-up fees, which are designed to reimburse the fixed start-up costs of the generation plants. I find that the complex structure of the offers leaves considerable room for strategic behavior, which consequently leads to anti-competitive and inefficient market outcomes. In the last chapter of my dissertation, I use laboratory experiments to contrast the performance of two complex-offer auctions against the performance of a simple-offer auction, in which the sellers have to recover all their generation costs - fixed and variable - through a uniform market-clearing price. I find that a simple-offer auction significantly reduces consumer prices and lowers price volatility. It mitigates anti-competitive effects that are present in the complex-offer auctions and achieves allocative efficiency more quickly.

Epifluorescent direct-write photolithography for microfluidic applications

NASA Astrophysics Data System (ADS)

Higgins, MacCallister; Geiger, Emil J.

2015-01-01

We present a technique for fabricating soft-lithography molds created using an epifluorescent microscope. By focusing the UV light emitted from a Hg arc lamp, we demonstrate the ability to direct-write photoresist features with a minimum resolution of 45 μm. This resolution is satisfactory for many microfluidic applications. A major advantage of this technique is its low cost, both in terms of capital investment and on-going expenditures. Furthermore, by using a motorized stage, we can quickly fabricate a design on demand, eliminating the need, cost, and lead-time required for a photomask. With the addition of an electronic shutter, complicated separate structures can be imaged and utilized to make a wide range of microfluidic devices. We demonstrate this technique using dry-film resist due to its low cost, ease of application, and less stringent safety protocols.

Modern methods of cost saving of the production activity in construction

NASA Astrophysics Data System (ADS)

Silka, Dmitriy

2017-10-01

Every time economy faces recession, cost saving questions acquire increased urgency. This article shows how companies of the construction industry have switched to the new kind of economic relations over recent years. It is specified that the dominant type of economic relations does not allow to quickly reorient on the necessary tools in accordance with new requirements of economic activity. Successful experience in the new environment becomes demanded. Cost saving methods, which were proven in other industries, are offered for achievement of efficiency and competitiveness of the companies. Analysis is performed on the example of the retail sphere, which, according to the authoritative analytical reviews, is extremely innovative on both local and world economic levels. At that, methods, based on the modern unprecedentedly high opportunities of communications and informational exchange took special place among offered methods.

Modeling Imperfect Generator Behavior in Power System Operation Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krad, Ibrahim

A key component in power system operations is the use of computer models to quickly study and analyze different operating conditions and futures in an efficient manner. The output of these models are sensitive to the data used in them as well as the assumptions made during their execution. One typical assumption is that generators and load assets perfectly follow operator control signals. While this is a valid simulation assumption, generators may not always accurately follow control signals. This imperfect response of generators could impact cost and reliability metrics. This paper proposes a generator model that capture this imperfect behaviormore » and examines its impact on production costs and reliability metrics using a steady-state power system operations model. Preliminary analysis shows that while costs remain relatively unchanged, there could be significant impacts on reliability metrics.« less

A Quick-Test for Biochar Effects on Seed Germination

EPA Science Inventory

Biochar is being globally evaluated as a soil amendment to improve soil characteristics (e.g. soil water holding, nutrient exchange, microbiology, pesticides and chemical availability) to increase crop yields. Unfortunately, there are no quick tests to determine what biochar type...

Onshore-offshore wind energy resource evaluation based on synergetic use of multiple satellite data and meteorological stations in Jiangsu Province, China

NASA Astrophysics Data System (ADS)

Wei, Xianglin; Duan, Yuewei; Liu, Yongxue; Jin, Song; Sun, Chao

2018-05-01

The demand for efficient and cost-effective renewable energy is increasing as traditional sources of energy such as oil, coal, and natural gas, can no longer satisfy growing global energy demands. Among renewable energies, wind energy is the most prominent due to its low, manageable impacts on the local environment. Based on meteorological data from 2006 to 2014 and multi-source satellite data (i.e., Advanced Scatterometer, Quick Scatterometer, and Windsat) from 1999 to 2015, an assessment of the onshore and offshore wind energy potential in Jiangsu Province was performed by calculating the average wind speed, average wind direction, wind power density, and annual energy production (AEP). Results show that Jiangsu has abundant wind energy resources, which increase from inland to coastal areas. In onshore areas, wind power density is predominantly less than 200 W/m2, while in offshore areas, wind power density is concentrates in the range of 328-500 W/m2. Onshore areas comprise more than 13,573.24 km2, mainly located in eastern coastal regions with good wind farm potential. The total wind power capacity in onshore areas could be as much as 2.06 x 105 GWh. Meanwhile, offshore wind power generation in Jiangsu Province is calculated to reach 2 x 106 GWh, which is approximately four times the electricity demand of the entire Jiangsu Province. This study validates the effective application of Advanced Scatterometer, Quick Scatterometer, and Windsat data to coastal wind energy monitoring in Jiangsu. Moreover, the methodology used in this study can be effectively applied to other similar coastal zones.

Influence of Geometry and Flow Variations on NO Formation in the Quick Mixer of a Staged Combustor

NASA Technical Reports Server (NTRS)

Hatch, M. S.; Sowa, W. A.; Samuelsen, G. S.; Holdeman, J. D.

1995-01-01

Staged combustion, such as Rich-Burn/Quick-Mix/Lean-Burn (RQL), is a viable strategy to meet nitric oxide (NO) emission goals for both stationary and propulsion gas turbine engines. A critical element of the design is the quick mixer section where the potential for NO production is high. While numerical calculations of the quick mixer under reacting conditions have been conducted, the hostile environment and lack of appropriate diagnostics have, to date, precluded experimental probing of the reacting case. As an alternative to understanding the effect of geometry and flow variations on the production of NO in the quick mixer, the present paper presents (1) a series of non-reacting parametric studies, and (2) a computational method to extrapolate the results of the non-reacting experiments to reacting conditions. The results show that the rate of NO production is highest in the immediate vicinity of the injection plane. For a given momentum flux ratio between the jets and mainstream, the most effective mixing geometry is that which mixes effectively in both (1) the plane of injection, and (2) the wall regions downstream of the plan of injection. The tailoring of the mixing is key to minimize the NO formed. As a result, the best overall mixer with respect to the minimization of NO production may depend on the system specific characteristics of the particular application.

Preventing, controlling, and managing alien species introduction for the health of aquatic and marine ecosystems

USGS Publications Warehouse

Short, C.I.; Gross, S.K.; Wilkinson, D.

2004-01-01

The introduction and spread of invasive species is an emerging global problem. As economic and ecological impacts continue to grow, there will be an increasing need to develop innovative solutions and global partnerships to combat the increasing rate of invasions and their accompanying impacts. Threats to sustainable fisheries in North America associated with alien species come from many global directions and sources and can be deliberate or the unintended consequence of other actions. Decisions about the role of sustainable fisheries in protecting and restoring the health of aquatic ecosystems become even more complex when economic and social factors are considered along with environmental impacts, because many intentionally introduced species also have associated economic and community costs and benefits. Actions designed to prevent or control alien species in an aquatic ecosystem are often complicated by these nonenvironmental factors as well as public perception and opinion. Aquatic ecosystems are disturbed to varying degrees by alien species, including disease organisms. Prevention is the first and best line of defense. Determining likely pathways and effective countermeasures is more cost-effective than either eradication or control. Our ability to quickly identify new species and their associated risk to ecosystems is critical in designing and implementing effective control and management actions. Lack of infrastructure and necessary resources, clear-cut authority for regulation and action, and scientific information about the biology of alien species and effective control techniques are often limiting factors that prevent the needed action to protect aquatic ecosystems.

Routing to preserve energy in wireless networks

NASA Astrophysics Data System (ADS)

Block, Frederick J., IV

Many applications for wireless radio networks require that some or all radios in the network rely on batteries as energy sources. In many cases, battery replacement is infeasible, expensive, or impossible. Communication protocols for such networks should be designed to preserve limited energy supplies. Because the choice of a route to a traffic sink influences how often radios must transmit and receive, poor route selection can quickly deplete the batteries of certain nodes. Previous work has shown that a network's lifetime can be extended by assigning higher routing costs to nodes with little remaining energy and nodes that must use high transmitter power to reach neighbor radios. Although using remaining energy levels in routing metrics can increase network lifetime, in practice, there may be significant error in a node's estimate of its battery level. The effect of battery level uncertainty on routing is examined. Routing metrics are presented that are designed to explicitly account for uncertainty in remaining energy. Simulation results using several statistical models for this uncertainty show that the proposed metrics perform well. In addition to knowledge of current battery levels, estimates of how quickly radios are consuming energy may be helpful in extending network lifetime. We present a family of routing metrics that incorporate a radio's rate of energy consumption. Simulation results show that the proposed family of metrics performs well under a variety of traffic models and network topologies. Route selection can also be complicated by time-varying link conditions. Radios may be subject to interference from other nearby communication systems, hostile jammers, and other, non-communication sources of noise. A route that first appears to have only a small cost may later require much greater energy expenditure when transmitting packets. Frequent route selection can help radios avoid using links with interference, but additional routing control messages increase energy consumption. We investigate the effects of time-varying interference on the lifetime of ad hoc networks. It is shown that there is a tradeoff between packet delay and node lifetime. We show that it is possible to design the system to perform well under a wide variety of channel conditions.

QuickRNASeq lifts large-scale RNA-seq data analyses to the next level of automation and interactive visualization.

PubMed

Zhao, Shanrong; Xi, Li; Quan, Jie; Xi, Hualin; Zhang, Ying; von Schack, David; Vincent, Michael; Zhang, Baohong

2016-01-08

RNA sequencing (RNA-seq), a next-generation sequencing technique for transcriptome profiling, is being increasingly used, in part driven by the decreasing cost of sequencing. Nevertheless, the analysis of the massive amounts of data generated by large-scale RNA-seq remains a challenge. Multiple algorithms pertinent to basic analyses have been developed, and there is an increasing need to automate the use of these tools so as to obtain results in an efficient and user friendly manner. Increased automation and improved visualization of the results will help make the results and findings of the analyses readily available to experimental scientists. By combing the best open source tools developed for RNA-seq data analyses and the most advanced web 2.0 technologies, we have implemented QuickRNASeq, a pipeline for large-scale RNA-seq data analyses and visualization. The QuickRNASeq workflow consists of three main steps. In Step #1, each individual sample is processed, including mapping RNA-seq reads to a reference genome, counting the numbers of mapped reads, quality control of the aligned reads, and SNP (single nucleotide polymorphism) calling. Step #1 is computationally intensive, and can be processed in parallel. In Step #2, the results from individual samples are merged, and an integrated and interactive project report is generated. All analyses results in the report are accessible via a single HTML entry webpage. Step #3 is the data interpretation and presentation step. The rich visualization features implemented here allow end users to interactively explore the results of RNA-seq data analyses, and to gain more insights into RNA-seq datasets. In addition, we used a real world dataset to demonstrate the simplicity and efficiency of QuickRNASeq in RNA-seq data analyses and interactive visualizations. The seamless integration of automated capabilites with interactive visualizations in QuickRNASeq is not available in other published RNA-seq pipelines. The high degree of automation and interactivity in QuickRNASeq leads to a substantial reduction in the time and effort required prior to further downstream analyses and interpretation of the analyses findings. QuickRNASeq advances primary RNA-seq data analyses to the next level of automation, and is mature for public release and adoption.

Collaborative Observation and Research (CORE) Watersheds: new strategies for tracking the regional effects of climate change on complex systems

NASA Astrophysics Data System (ADS)

Murdoch, P. S.

2007-12-01

The past 30 years of environmental research have shown that our world is not made up of discrete components acting independently, but rather of a mosaic of complex relations among air, land, water, living resources, and human activities. Recent warming of the climate is having a significant effect on the functioning of those systems. A national imperative is developing to quickly establish local, regional, and national systems for anticipating environmental degradation from a changing climate and developing cost-effective adaptation or mitigation strategies. In these circumstances, the debate over research versus monitoring becomes moot--there is a clear need for the integrated application of both across a range of temporal and spatial scales. A national framework that effectively addresses the multiple scales and complex multi-disciplinary processes of climate change is being assembled largely from existing programs through collaboration among Federal, State, local, and NGO organizations. The result will be an observation and research network capable of interpreting complex environmental changes at a range of spatial and temporal scales, but at less cost than if the network were funded as an independent initiative. A pilot implementation of the collaborative framework in the Delaware River Basin yielded multi-scale assessments of carbon storage and flux, and the effects of forest fragmentation and soil calcium depletion on ecosystem function. A prototype of a national climate-effects observation and research network linking research watersheds, regional surveys, remote sensing, and ecosystem modeling is being initiated in the Yukon River Basin where carbon flux associated with permafrost thaw could accelerate global warming.

[Assessment of pragmatics from verbal spoken data].

PubMed

Gallardo-Paúls, B

2009-02-27

Pragmatic assessment is usually complex, long and sophisticated, especially for professionals who lack specific linguistic education and interact with impaired speakers. To design a quick method of assessment that will provide a quick general evaluation of the pragmatic effectiveness of neurologically affected speakers. This first filter will allow us to decide whether a detailed analysis of the altered categories should follow. Our starting point was the PerLA (perception, language and aphasia) profile of pragmatic assessment designed for the comprehensive analysis of conversational data in clinical linguistics; this was then converted into a quick questionnaire. A quick protocol of pragmatic assessment is proposed and the results found in a group of children with attention deficit hyperactivity disorder are discussed.

A narrative review on the effect of economic downturns on the nursing labour market: implications for policy and planning

PubMed Central

2012-01-01

Economic downturns and recession lead to budget cuts and service reductions in the healthcare sector which often precipitate layoffs and hiring freezes. Nurses, being the largest professional group in healthcare, are strongly affected by cost reductions. Economic downturns destabilize the nursing labour market with potential negative outcomes, including serious shortages, extending beyond the recessionary period. The objectives of this manuscript are to provide an overview of the potential short- and long-run impact of economic downturns on the supply and demand of nurses, and present healthcare decision makers with a framework to enhance their ability to strategically manage their human resources through economic cycles. A narrative review of the literature on the effects of economic downturns on the nursing labour market in developed countries was carried out with a special focus on studies offering a longitudinal examination of labour force trends. Analysis indicates that economic downturns limit the ability of public payers and institutions to finance their existing health workforce. As salaried healthcare workers, nurses are especially susceptible to institutional budget cuts. In the short run, economic downturns may temporarily reduce the demand for and increase the supply of nurses, thereby influencing nursing wages and turnover rates. These effects may destabilise the nursing labour market in the long run. After economic downturns, the market would quickly display the pre-recessionary trends and there may be serious demand–supply imbalances resulting in severe shortages. Potential long-term effects of recession on the nursing labour market may include a downsized active workforce, difficulty in retaining younger nurses, a decreased supply of nurses and workforce casualisation. Lack of understanding of labour market dynamics and trends might mislead policy makers into making misinformed workforce downsizing decisions that are often difficult and expensive to reverse. In the aftermath of an economic downturn, the costs of attracting nurses back often outweigh the short term cost savings. Effective management should support the nursing workforce by creating attractive and stable work environments to retain nurses at a manageable cost. PMID:22905739

A narrative review on the effect of economic downturns on the nursing labour market: implications for policy and planning.

PubMed

Alameddine, Mohamad; Baumann, Andrea; Laporte, Audrey; Deber, Raisa

2012-08-20

Economic downturns and recession lead to budget cuts and service reductions in the healthcare sector which often precipitate layoffs and hiring freezes. Nurses, being the largest professional group in healthcare, are strongly affected by cost reductions. Economic downturns destabilize the nursing labour market with potential negative outcomes, including serious shortages, extending beyond the recessionary period. The objectives of this manuscript are to provide an overview of the potential short- and long-run impact of economic downturns on the supply and demand of nurses, and present healthcare decision makers with a framework to enhance their ability to strategically manage their human resources through economic cycles.A narrative review of the literature on the effects of economic downturns on the nursing labour market in developed countries was carried out with a special focus on studies offering a longitudinal examination of labour force trends. Analysis indicates that economic downturns limit the ability of public payers and institutions to finance their existing health workforce. As salaried healthcare workers, nurses are especially susceptible to institutional budget cuts. In the short run, economic downturns may temporarily reduce the demand for and increase the supply of nurses, thereby influencing nursing wages and turnover rates. These effects may destabilise the nursing labour market in the long run. After economic downturns, the market would quickly display the pre-recessionary trends and there may be serious demand-supply imbalances resulting in severe shortages. Potential long-term effects of recession on the nursing labour market may include a downsized active workforce, difficulty in retaining younger nurses, a decreased supply of nurses and workforce casualisation.Lack of understanding of labour market dynamics and trends might mislead policy makers into making misinformed workforce downsizing decisions that are often difficult and expensive to reverse. In the aftermath of an economic downturn, the costs of attracting nurses back often outweigh the short term cost savings. Effective management should support the nursing workforce by creating attractive and stable work environments to retain nurses at a manageable cost.

Effect of short-term regulated temperature variations on the swimming economy of Atlantic salmon smolts

PubMed Central

Palstra, A. P.

2017-01-01

Abstract Migratory species travelling long distances between habitats to spawn or feed are well adapted to optimize their swimming economy. However, human activities, such as river regulation, represent potential threats to fish migration by changing environmental parameters that will have impact on their metabolism. The main objective of this study was to evaluate the changes in the swimming energetics of a salmonid species, Atlantic salmon (Salmo salar L.), caused by short-term temperature variations that usually result from the operation of hydroelectrical dams. Intermittent flow respirometry in swim tunnels allows to obtain high resolution data on oxygen consumption of swimming fish which can reflect aerobic and anaerobic metabolism. This method was used to compare the metabolic rates of oxygen consumption before, during and after sudden thermal change. Control (no temperature variation) and experimental (temperature variation of approximately 4°C in 1 h) swimming trials were conducted to achieve the following objectives: (i) quantify the variations in oxygen consumption associated with abrupt temperature decrease, and (ii) assess if the tested fish return quickly to initial oxygen consumption rates. Main results revealed that Atlantic salmon smolts show a strong response to sudden temperature variation, significantly reducing the oxygen consumption rate up to a seven-fold change. Fish quickly returned to initial swimming costs shortly after reestablishment of temperature values. Results from this study can be used to evaluate the species-specific effects of the applied operation modes by hydroelectrical dams and to increase the success of conservation and management actions directed to fish species inhabiting regulated rivers. PMID:28480037

Effect of short-term regulated temperature variations on the swimming economy of Atlantic salmon smolts.

PubMed

Alexandre, C M; Palstra, A P

2017-01-01

Migratory species travelling long distances between habitats to spawn or feed are well adapted to optimize their swimming economy. However, human activities, such as river regulation, represent potential threats to fish migration by changing environmental parameters that will have impact on their metabolism. The main objective of this study was to evaluate the changes in the swimming energetics of a salmonid species, Atlantic salmon ( Salmo salar L.), caused by short-term temperature variations that usually result from the operation of hydroelectrical dams. Intermittent flow respirometry in swim tunnels allows to obtain high resolution data on oxygen consumption of swimming fish which can reflect aerobic and anaerobic metabolism. This method was used to compare the metabolic rates of oxygen consumption before, during and after sudden thermal change. Control (no temperature variation) and experimental (temperature variation of approximately 4°C in 1 h) swimming trials were conducted to achieve the following objectives: (i) quantify the variations in oxygen consumption associated with abrupt temperature decrease, and (ii) assess if the tested fish return quickly to initial oxygen consumption rates. Main results revealed that Atlantic salmon smolts show a strong response to sudden temperature variation, significantly reducing the oxygen consumption rate up to a seven-fold change. Fish quickly returned to initial swimming costs shortly after reestablishment of temperature values. Results from this study can be used to evaluate the species-specific effects of the applied operation modes by hydroelectrical dams and to increase the success of conservation and management actions directed to fish species inhabiting regulated rivers.

Health, safety, and ecological implications of using biobased floor-stripping products.

PubMed

Massawe, Ephraim; Geiser, Kenneth; Ellenbecker, Michael; Marshall, Jason

2007-05-01

The main objective of the study reported here was to investigate the ecological, health, and safety (EHS) implications of using biobased floor strippers as alternatives to solvent-based products such as Johnson Wax Professional (Pro Strip). The authors applied a quick EHS-scoring technique developed by the Surface Solution Laboratory (SSL) of the Toxics Use Reduction Institute (TURI) to some alternative, biobased products that had previously performed as well as or close to as well as the currently used product. The quick technique is considered an important step in EHS assessment, particularly for toxics use reduction planners and advocates who may not have the resources to subject many alternative products or processes at once to detailed EHS analysis. Taking this step narrows available options to a manageable number. (Technical-performance experiments were also conducted, but the results are not discussed or reported in this paper). The cost of switching to biobased floor strippers was assessed and compared with the cost of using the traditional product, both at full strength and at the dilution ratios recommended by the respective manufacturers. The EHS analysis was based on a framework consisting of five parameters: volatile organic compounds (VOCs); pH; global-warming potential (GWP); ozone depletion potential (ODP); and safety scores in areas such as flammability, stability, and special hazards, based on ratings from the Hazardous Material Classification System (HMIS) and the National Fire Protection Association (NFPA). Total EHS scores were calculated with data derived from the material safety data sheets. For most cleaning products previously investigated by the TURI SSL, the investigators have demonstrated that the five key parameters used in the study reported here can successfully be used for quick screening of the EHS impacts of cleaning alternatives. All eight biobased, or green, products evaluated in the study had better EHS-screening scores than did Pro Strip. One product, Botanic Gold, had a screening score of 49 out of a possible 50. This score was much higher than the score of 26 achieved by Pro Strip. The other biobased floor strippers had EHS-screening scores of > or =37, which is the average value of solvent-based cleaning solutions. These results indicate that biobased cleaning products capable of floor stripping are potentially better than traditional products with respect to the five EHS parameters used. The cost of switching to biobased floor strippers at their full strength ranged from a minimum of U.S. $15.50 per gallon ($4.10 per liter) for Eco Natural Floor Stripper (WPR) to about $59.00 per gallon ($15.61 per liter) for Botanic Gold. At 25 percent volume by volume (v/v), the recommended dilution ratio for the traditional product, the cost of the Botanic Gold was $14.75 per gallon ($3.90 per liter), or about five times more than that of Pro Strip, which was $2.48 per gallon ($0.65 per liter). Since these figures do not reflect all of the EHS costs, such as disposal and recycling fees, it is likely that use of Botanic Gold could be cost-effective in the long run. The authors therefore recommend that detailed EHS analysis be conducted on this alternative biobased floor stripper. It is also recommended that large field trials be conducted and that janitors' or consumers' perceptions be determined. For detailed assessment of eco-toxicological properties of the biobased floor strippers, investigations of the common additives in the Botanic Gold formulation should be conducted through use of databases on the World Wide Web such as Toxnet. Finally, the current policies, regulations, and standards that promote biobased products should be investigated to determine their strengths and weaknesses. This would encourage a broader public debate about the future of the biobased industry in the context of sustainability.

Evaluation of search strategies for microcalcifications and masses in 3D images

NASA Astrophysics Data System (ADS)

Eckstein, Miguel P.; Lago, Miguel A.; Abbey, Craig K.

2018-03-01

Medical imaging is quickly evolving towards 3D image modalities such as computed tomography (CT), magnetic resonance imaging (MRI) and digital breast tomosynthesis (DBT). These 3D image modalities add volumetric information but further increase the need for radiologists to search through the image data set. Although much is known about search strategies in 2D images less is known about the functional consequences of different 3D search strategies. We instructed readers to use two different search strategies: drillers had their eye movements restricted to a few regions while they quickly scrolled through the image stack, scanners explored through eye movements the 2D slices. We used real-time eye position monitoring to ensure observers followed the drilling or the scanning strategy while approximately preserving the percentage of the volumetric data covered by the useful field of view. We investigated search for two signals: a simulated microcalcification and a larger simulated mass. Results show an interaction between the search strategy and lesion type. In particular, scanning provided significantly better detectability for microcalcifications at the cost of 5 times more time to search while there was little change in the detectability for the larger simulated masses. Analyses of eye movements support the hypothesis that the effectiveness of a search strategy in 3D imaging arises from the interaction of the fixational sampling of visual information and the signals' visibility in the visual periphery.

Immobilization of Wyoming bears using carfentanil and xylazine.

PubMed

Kreeger, Terry J; Bjornlie, Dan; Thompson, Dan; Clapp, Justin; Clark, Colby; Hansen, Cole; Huizenga, Matt; Lockwood, Sam

2013-07-01

Seven grizzly (Ursus arctos; four male, three female) and three black (Ursus americanus; two male, one female) bears caught in culvert traps or leg snares were immobilized in northwestern Wyoming with carfentanil and xylazine at doses, respectively, of 0.011 ± 0.001 and 0.12 ± 0.01 mg/kg for grizzly bears and 0.014 ± 0.002 and 0.15 ± 0.04 mg/kg for black bears. These drugs were antagonized with 1 mg/kg naltrexone and 2 mg/kg tolazoline. Induction and recovery times, respectively, were 4.3 ± 0.5 and 7.1 ± 0.8 min for grizzly bears and 5.2 ± 0.4 and 9.1 ± 2.2 min for black bears. Inductions were smooth and uneventful. Recoveries were characterized initially by increased respiration followed by raising of the head, which quickly led to a full recovery, with the bears recognizing and avoiding humans and moving away, maneuvering around obstacles. All bears experienced respiratory depression, which did not significantly improve with supplemental oxygen on the basis of pulse oximetry (P=0.56). Rectal temperatures were normothermic. Carfentanil-xylazine immobilization of bears provided significant advantages over other drug regimens, including small drug volumes, predictable inductions, quick and complete recoveries, and lower costs. On the basis of these data, both grizzly and black bears can be immobilized effectively with 0.01 mg/kg carfentanil and 0.1 mg/kg xylazine.

Anatomy of an Extensible Open Source PACS.

PubMed

Valente, Frederico; Silva, Luís A Bastião; Godinho, Tiago Marques; Costa, Carlos

2016-06-01

The conception and deployment of cost effective Picture Archiving and Communication Systems (PACS) is a concern for small to medium medical imaging facilities, research environments, and developing countries' healthcare institutions. Financial constraints and the specificity of these scenarios contribute to a low adoption rate of PACS in those environments. Furthermore, with the advent of ubiquitous computing and new initiatives to improve healthcare information technologies and data sharing, such as IHE and XDS-i, a PACS must adapt quickly to changes. This paper describes Dicoogle, a software framework that enables developers and researchers to quickly prototype and deploy new functionality taking advantage of the embedded Digital Imaging and Communications in Medicine (DICOM) services. This full-fledged implementation of a PACS archive is very amenable to extension due to its plugin-based architecture and out-of-the-box functionality, which enables the exploration of large DICOM datasets and associated metadata. These characteristics make the proposed solution very interesting for prototyping, experimentation, and bridging functionality with deployed applications. Besides being an advanced mechanism for data discovery and retrieval based on DICOM object indexing, it enables the detection of inconsistencies in an institution's data and processes. Several use cases have benefited from this approach such as radiation dosage monitoring, Content-Based Image Retrieval (CBIR), and the use of the framework as support for classes targeting software engineering for clinical contexts.

The Spin Move: A Reliable and Cost-Effective Gowning Technique for the 21st Century.

PubMed

Ochiai, Derek H; Adib, Farshad

2015-04-01

Operating room efficiency (ORE) and utilization are considered one of the most crucial components of quality improvement in every hospital. We introduced a new gowning technique that could optimize ORE. The Spin Move quickly and efficiently wraps a surgical gown around the surgeon's body. This saves the operative time expended through the traditional gowning techniques. In the Spin Move, while the surgeon is approaching the scrub nurse, he or she uses the left heel as the fulcrum. The torque, which is generated by twisting the right leg around the left leg, helps the surgeon to close the gown as quickly and safely as possible. From 2003 to 2012, the Spin Move was performed in 1,725 consecutive procedures with no complication. The estimated average time was 5.3 and 7.8 seconds for the Spin Move and traditional gowning, respectively. The estimated time saving for the senior author during this period was 71.875 minutes. Approximately 20,000 orthopaedic surgeons practice in the United States. If this technique had been used, 23,958 hours could have been saved. The money saving could have been $14,374,800.00 (23,958 hours × $600/operating room hour) during the past 10 years. The Spin Move is easy to perform and reproducible. It saves operating room time and increases ORE.

The Spin Move: A Reliable and Cost-Effective Gowning Technique for the 21st Century

PubMed Central

Ochiai, Derek H.; Adib, Farshad

2015-01-01

Operating room efficiency (ORE) and utilization are considered one of the most crucial components of quality improvement in every hospital. We introduced a new gowning technique that could optimize ORE. The Spin Move quickly and efficiently wraps a surgical gown around the surgeon's body. This saves the operative time expended through the traditional gowning techniques. In the Spin Move, while the surgeon is approaching the scrub nurse, he or she uses the left heel as the fulcrum. The torque, which is generated by twisting the right leg around the left leg, helps the surgeon to close the gown as quickly and safely as possible. From 2003 to 2012, the Spin Move was performed in 1,725 consecutive procedures with no complication. The estimated average time was 5.3 and 7.8 seconds for the Spin Move and traditional gowning, respectively. The estimated time saving for the senior author during this period was 71.875 minutes. Approximately 20,000 orthopaedic surgeons practice in the United States. If this technique had been used, 23,958 hours could have been saved. The money saving could have been $14,374,800.00 (23,958 hours × $600/operating room hour) during the past 10 years. The Spin Move is easy to perform and reproducible. It saves operating room time and increases ORE. PMID:26052490

14 CFR 25.1329 - Flight guidance system.

Code of Federal Regulations, 2014 CFR

2014-01-01

... (or equivalent). The autothrust quick disengagement controls must be located on the thrust control... wheel (or equivalent) and thrust control levers. (b) The effects of a failure of the system to disengage... guidance system. (a) Quick disengagement controls for the autopilot and autothrust functions must be...

14 CFR 25.1329 - Flight guidance system.

Code of Federal Regulations, 2012 CFR

2012-01-01

... (or equivalent). The autothrust quick disengagement controls must be located on the thrust control... wheel (or equivalent) and thrust control levers. (b) The effects of a failure of the system to disengage... guidance system. (a) Quick disengagement controls for the autopilot and autothrust functions must be...

14 CFR 25.1329 - Flight guidance system.

Code of Federal Regulations, 2011 CFR

2011-01-01

... (or equivalent). The autothrust quick disengagement controls must be located on the thrust control... wheel (or equivalent) and thrust control levers. (b) The effects of a failure of the system to disengage... guidance system. (a) Quick disengagement controls for the autopilot and autothrust functions must be...

14 CFR 25.1329 - Flight guidance system.

Code of Federal Regulations, 2013 CFR

2013-01-01

... (or equivalent). The autothrust quick disengagement controls must be located on the thrust control... wheel (or equivalent) and thrust control levers. (b) The effects of a failure of the system to disengage... guidance system. (a) Quick disengagement controls for the autopilot and autothrust functions must be...

14 CFR 25.1329 - Flight guidance system.

Code of Federal Regulations, 2010 CFR

2010-01-01

... (or equivalent). The autothrust quick disengagement controls must be located on the thrust control... wheel (or equivalent) and thrust control levers. (b) The effects of a failure of the system to disengage... guidance system. (a) Quick disengagement controls for the autopilot and autothrust functions must be...

Costs of task allocation with local feedback: Effects of colony size and extra workers in social insects and other multi-agent systems.

PubMed

Radeva, Tsvetomira; Dornhaus, Anna; Lynch, Nancy; Nagpal, Radhika; Su, Hsin-Hao

2017-12-01

Adaptive collective systems are common in biology and beyond. Typically, such systems require a task allocation algorithm: a mechanism or rule-set by which individuals select particular roles. Here we study the performance of such task allocation mechanisms measured in terms of the time for individuals to allocate to tasks. We ask: (1) Is task allocation fundamentally difficult, and thus costly? (2) Does the performance of task allocation mechanisms depend on the number of individuals? And (3) what other parameters may affect their efficiency? We use techniques from distributed computing theory to develop a model of a social insect colony, where workers have to be allocated to a set of tasks; however, our model is generalizable to other systems. We show, first, that the ability of workers to quickly assess demand for work in tasks they are not currently engaged in crucially affects whether task allocation is quickly achieved or not. This indicates that in social insect tasks such as thermoregulation, where temperature may provide a global and near instantaneous stimulus to measure the need for cooling, for example, it should be easy to match the number of workers to the need for work. In other tasks, such as nest repair, it may be impossible for workers not directly at the work site to know that this task needs more workers. We argue that this affects whether task allocation mechanisms are under strong selection. Second, we show that colony size does not affect task allocation performance under our assumptions. This implies that when effects of colony size are found, they are not inherent in the process of task allocation itself, but due to processes not modeled here, such as higher variation in task demand for smaller colonies, benefits of specialized workers, or constant overhead costs. Third, we show that the ratio of the number of available workers to the workload crucially affects performance. Thus, workers in excess of those needed to complete all tasks improve task allocation performance. This provides a potential explanation for the phenomenon that social insect colonies commonly contain inactive workers: these may be a 'surplus' set of workers that improves colony function by speeding up optimal allocation of workers to tasks. Overall our study shows how limitations at the individual level can affect group level outcomes, and suggests new hypotheses that can be explored empirically.

Costs of task allocation with local feedback: Effects of colony size and extra workers in social insects and other multi-agent systems

PubMed Central

Dornhaus, Anna; Su, Hsin-Hao

2017-01-01

Adaptive collective systems are common in biology and beyond. Typically, such systems require a task allocation algorithm: a mechanism or rule-set by which individuals select particular roles. Here we study the performance of such task allocation mechanisms measured in terms of the time for individuals to allocate to tasks. We ask: (1) Is task allocation fundamentally difficult, and thus costly? (2) Does the performance of task allocation mechanisms depend on the number of individuals? And (3) what other parameters may affect their efficiency? We use techniques from distributed computing theory to develop a model of a social insect colony, where workers have to be allocated to a set of tasks; however, our model is generalizable to other systems. We show, first, that the ability of workers to quickly assess demand for work in tasks they are not currently engaged in crucially affects whether task allocation is quickly achieved or not. This indicates that in social insect tasks such as thermoregulation, where temperature may provide a global and near instantaneous stimulus to measure the need for cooling, for example, it should be easy to match the number of workers to the need for work. In other tasks, such as nest repair, it may be impossible for workers not directly at the work site to know that this task needs more workers. We argue that this affects whether task allocation mechanisms are under strong selection. Second, we show that colony size does not affect task allocation performance under our assumptions. This implies that when effects of colony size are found, they are not inherent in the process of task allocation itself, but due to processes not modeled here, such as higher variation in task demand for smaller colonies, benefits of specialized workers, or constant overhead costs. Third, we show that the ratio of the number of available workers to the workload crucially affects performance. Thus, workers in excess of those needed to complete all tasks improve task allocation performance. This provides a potential explanation for the phenomenon that social insect colonies commonly contain inactive workers: these may be a ‘surplus’ set of workers that improves colony function by speeding up optimal allocation of workers to tasks. Overall our study shows how limitations at the individual level can affect group level outcomes, and suggests new hypotheses that can be explored empirically. PMID:29240763

Guideposts for the U.S. Military in the Twenty-first Century

DTIC Science & Technology

2000-01-01

emphasizes cost over value , administration over output, and the separation of operators from engineers. To defeat complacency and regain superiority...teaching military values and culture. Increasingly, the lure of attractive, non-military careers poses a serious challenge to military retention. If we are...future conflicts-the vision that air power would be primarily of strategic value , carrying the war quickly and decisively to the heart of the enemy’s

Algorithms for Automated DNA Assembly

DTIC Science & Technology

2010-01-01

polyketide synthase gene cluster. Proc. Natl Acad. Sci. USA, 101, 15573–15578. 16. Shetty,R.P., Endy,D. and Knight,T.F. Jr (2008) Engineering BioBrick vectors...correct theoretical construction scheme is de- veloped manually, it is likely to be suboptimal by any number of cost metrics. Modular, robust and...to an exhaustive search on a small synthetic dataset and our results show that our algorithms can quickly find an optimal solution. Comparison with

A general-purpose balloon-borne pointing system for solar scientific instruments

NASA Technical Reports Server (NTRS)

Polites, M. E.

1990-01-01

A general purpose balloonborne pointing system for accommodating a wide variety of solar scientific instruments is described. It is designed for precise pointing, low cost, and quick launch. It offers the option of three-axis control, pitch-yaw-roll, or two-axis control, pitch-yaw, depending on the needs of the solar instrument. Simulation results are presented that indicate good pointing capability at Sun elevation angles ranging from 10 to 80 deg.

Emerging Global Trends in Advanced Manufacturing

DTIC Science & Technology

2012-03-01

facility. Such distributed manufacturing could be made accessible to large masses even in remote areas (Ehmann 2011). For example, Zara is a Spanish...consumers. It has tightened its supply-chain management so that the consumer “pulls” the design. Zara uses state-of-the-art IT and distribution...systems to collect data daily on trends so they can quickly turn out new designs. Zara keeps costs down by using existing materials in stock and through

Wind Energy Finance (WEF): An Online Calculator for Economic Analysis of Wind Projects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2004-02-01

This brochure provides an overview of Wind Energy Finance (WEF), a free online cost of energy calculator developed by the National Renewable Energy Laboratory that provides quick, detailed economic evaluation of potential utility-scale wind energy projects. The brochure lists the features of the tool, the inputs and outputs that a user can expect, visuals of the screens and a Cash Flow Results table, and contact information.

Assistance Focus: Asia/Pacific Region (Brochure)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Clean Energy Solutions Center Ask an Expert service connects governments seeking policy information and advice with one of more than 30 global policy experts who can provide reliable and unbiased quick-response advice and information. The service is available at no cost to government agency representatives from any country and the technical institutes assisting them. This publication presents summaries of assistance provided to governments in the Asia/Pacific region, including the benefits of that assistance.

Parameters. US Army War College Quarterly. Volume 24, Number 2, Summer 1994

DTIC Science & Technology

1994-01-01

Karabakh i Vokryg Nyevo (Yerevan: 1991); Artem Ohandfanian, Armenien (Wien: Boehlan, 1989); the classic Deutschland und Armenlett 1914 - 1918 , Samlung...cost estimates are revised and political realities change. It is not uncommon for the Congress to modify an Admini- stration budget request in ways... political purpose that outweighed planning: After the fall of the Berlin Wall, the Bush Administration needed quickly to focus the public’s attention

The National Shipbuilding Research Program. Environmental Studies and Testing (Phase V)

DTIC Science & Technology

2000-11-20

development of an analytical procedure for toxic organic compounds, including TBT ( tributyltin ), whose turnaround time would be in the order of minutes...Cost of the Subtask was $20,000. Subtask #33 - Turnaround Analytical Method for TBT This Subtask performed a preliminary investigation leading to the...34Quick TBT Analytical Method" that will yield reliable results in 15 minutes, a veritable breakthrough in sampling technology. The Subtask was managed by

Studying Transonic Gases With a Hydraulic Analog

NASA Technical Reports Server (NTRS)

Wagner, W.; Lepore, F.

1986-01-01

Water table for hydraulic-flow research yields valuable information about gas flow at transonic speeds. Used to study fuel and oxidizer flow in high-pressure rocket engines. Method applied to gas flows in such equipment as furnaces, nozzles, and chemical lasers. Especially suitable when wall contours nonuniform, discontinuous, or unusually shaped. Wall shapes changed quickly for study and evaluated on spot. Method used instead of computer simulation when computer models unavailable, inaccurate, or costly to run.

Computational algorithm to evaluate product disassembly cost index

NASA Astrophysics Data System (ADS)

Zeid, Ibrahim; Gupta, Surendra M.

2002-02-01

Environmentally conscious manufacturing is an important paradigm in today's engineering practice. Disassembly is a crucial factor in implementing this paradigm. Disassembly allows the reuse and recycling of parts and products that reach their death after their life cycle ends. There are many questions that must be answered before a disassembly decision can be reached. The most important question is economical. The cost of disassembly versus the cost of scrapping a product is always considered. This paper develops a computational tool that allows decision-makers to calculate the disassembly cost of a product. The tool makes it simple to perform 'what if' scenarios fairly quickly. The tool is Web based and has two main parts. The front-end part is a Web page and runs on the client side in a Web browser, while the back-end part is a disassembly engine (servlet) that has disassembly knowledge and costing algorithms and runs on the server side. The tool is based on the client/server model that is pervasively utilized throughout the World Wide Web. An example is used to demonstrate the implementation and capabilities of the tool.

Productivity Losses and Costs in the Less-Common Systemic Autoimmune Rheumatic Diseases.

PubMed

McCormick, Natalie; Marra, Carlo A; Aviña-Zubieta, J Antonio

2017-10-30

We synthesised the literature on productivity losses and costs in the less-common systemic autoimmune rheumatic diseases: Sjogren's syndrome (SjS), systemic sclerosis (SSc), poly/dermatomyositis (PM/DM), and systemic vasculitides (SV). Of 29 studies located, 12 were published 2012 onwards (SSc = 6, SjS = 2, PM/DM = 2, SV = 2). In these, 25% of PM/DM, and 21-26% of SV, were work disabled, 22% of SSc stopped work within 3 years of diagnosis, and annual costs of absenteeism in SSc averaged $12,024 2017 USD. Very few studies reported on costs, presenteeism (working at reduced levels), or unpaid productivity loss. Across multiple systemic autoimmune rheumatic diseases (SARDs), major drivers of lost productivity were generalised items like pain, depression, and fatigue, rather than disease-specific factors. Evidence suggests that work disability is common in SSc and strikes quickly. However, in SSc and other SARDs, more comprehensive estimates are needed, which include absenteeism and presenteeism from paid and unpaid work, costs, and drivers of productivity loss.

Transforming a Brutalist Monument into an Energy Efficient Building Without Destroying the Formal Appealing: The Example of the Mediterranean Bank in Potenza (Italy)

NASA Astrophysics Data System (ADS)

Lembo, Filiberto

In years 1980 the "brutalist" and "monumentalist" architecture went even in Italy, and in Potenza, and it finds some interesting examples, such as the building designed as the home of the Mediterranean Bank. A monumental building, all in reinforced facing concrete and curtain walls, with refined proportional relationships, and so devoid of insulation (annual heat demand of 69 kWh/m3 year), that its management has become unbearable from the economic point of view, so it was abandoned a few years ago. Aim of this work was to define a design methodology that preserves all the qualities of architecture, but at a cost that is economically bearable and made the building energetically efficient. This was done by allying a very thick and efficient isolation, protected by a ventilated continues rainscreen, finished with several layers of a thin plaster with a bèton-like effect, which determines a morphology that, while different, recalls the original. The curtain walls were doubled with a double skin façade, whose performance has been optimized with a purpose created software. The huge skylight roof of the interior atrium has been doubled with a new, of different trend and thermally more effective. The roof was covered with photovoltaic panels. The result is an annual heat and refrigeration demand of 17 kWh/m3 year, at a cost of 20,000 €/m2, quickly depreciating, due to savings in operating costs for air conditioning (from €104,800.00 to €14,700.00 per year).

Environmental DNA from Residual Saliva for Efficient Noninvasive Genetic Monitoring of Brown Bears (Ursus arctos)

PubMed Central

Wheat, Rachel E.; Allen, Jennifer M.; Miller, Sophie D. L.; Wilmers, Christopher C.; Levi, Taal

2016-01-01

Noninvasive genetic sampling is an important tool in wildlife ecology and management, typically relying on hair snaring or scat sampling techniques, but hair snaring is labor and cost intensive, and scats yield relatively low quality DNA. New approaches utilizing environmental DNA (eDNA) may provide supplementary, cost-effective tools for noninvasive genetic sampling. We tested whether eDNA from residual saliva on partially-consumed Pacific salmon (Oncorhynchus spp.) carcasses might yield suitable DNA quality for noninvasive monitoring of brown bears (Ursus arctos). We compared the efficiency of monitoring brown bear populations using both fecal DNA and salivary eDNA collected from partially-consumed salmon carcasses in Southeast Alaska. We swabbed a range of tissue types from 156 partially-consumed salmon carcasses from a midseason run of lakeshore-spawning sockeye (O. nerka) and a late season run of stream-spawning chum (O. keta) salmon in 2014. We also swabbed a total of 272 scats from the same locations. Saliva swabs collected from the braincases of salmon had the best amplification rate, followed by swabs taken from individual bite holes. Saliva collected from salmon carcasses identified unique individuals more quickly and required much less labor to locate than scat samples. Salmon carcass swabbing is a promising method to aid in efficient and affordable monitoring of bear populations, and suggests that the swabbing of food remains or consumed baits from other animals may be an additional cost-effective and valuable tool in the study of the ecology and population biology of many elusive and/or wide-ranging species. PMID:27828988

Incentives in the family II: behavioral dynamics and the evolution of non-costly signaling.

PubMed

Akçay, Erol

2012-02-07

In many biological and social interactions, individuals with private information have incentives to misrepresent their information. A prominent example is when offspring know their need or condition but the parents do not. Theory showed that signal costs can ensure truthful communication in such situations, but further studies have cast in doubt whether empirically measured costs are high enough to sustain honesty, and whether the costly signaling equilibrium represents a fitness advantage over non-signaling. Here, I tackle these issues with a model of signaling that takes place at the behavioral time-scale through dynamic responses of individuals to each other. I then embed this behavioral model in an evolutionary one that asks how the decision rules of the parent and offspring evolve in response to the trade-off between signal costs and the costs of provisioning. I find that a non-costly honest signaling equilibrium can evolve when relatedness between siblings is above a certain threshold. This threshold is lower when (i) offspring get satiated more quickly, (ii) the cost of provisioning to the parent escalates less rapidly, or (iii) the variation in offspring need is higher. These results provide a potential resolution to the apparent paradox of costly begging. I also discuss the relation between costly signaling and mechanism design theories. Copyright © 2011 Elsevier Ltd. All rights reserved.

Artificial Urine for Teaching Urinalysis Concepts and Diagnosis of Urinary Tract Infection in the Medical Microbiology Laboratory.

PubMed

Khan, Latifa B; Read, Hannah M; Ritchie, Stephen R; Proft, Thomas

2017-01-01

Dipstick urinalysis is an informative, quick, cost-effective and non-invasive diagnostic tool that is useful in clinical practice for the diagnosis of urinary tract infections (UTIs), kidney diseases, and diabetes. We used dipstick urinalysis as a hands-on microbiology laboratory exercise to reinforce student learning about UTIs with a particular focus on cystitis, which is a common bacterial infection. To avoid exposure to potentially contaminated human urine samples, we prepared artificial urine using easily acquired and affordable ingredients, which allowed less-experienced students to perform urinalysis without the risk of exposure to pathogenic organisms and ensured reliable availability of the urine samples. This practical class taught medical students how to use urinalysis data in conjunction with medical history to diagnose diseases from urine samples and to determine a treatment plan for clinical scenarios.

Probabilistic Analysis of Gas Turbine Field Performance

NASA Technical Reports Server (NTRS)

Gorla, Rama S. R.; Pai, Shantaram S.; Rusick, Jeffrey J.

2002-01-01

A gas turbine thermodynamic cycle was computationally simulated and probabilistically evaluated in view of the several uncertainties in the performance parameters, which are indices of gas turbine health. Cumulative distribution functions and sensitivity factors were computed for the overall thermal efficiency and net specific power output due to the thermodynamic random variables. These results can be used to quickly identify the most critical design variables in order to optimize the design, enhance performance, increase system availability and make it cost effective. The analysis leads to the selection of the appropriate measurements to be used in the gas turbine health determination and to the identification of both the most critical measurements and parameters. Probabilistic analysis aims at unifying and improving the control and health monitoring of gas turbine aero-engines by increasing the quality and quantity of information available about the engine's health and performance.

The SULSA Assay Development Fund: accelerating translation of new biology from academia to pharma.

PubMed

McElroy, Stuart P; Jones, Philip S; Barrault, Denise V

2017-02-01

With industry increasingly sourcing preclinical drug discovery projects from academia it is important that new academic discoveries are enabled through translation with HTS-ready assays. However, many scientifically interesting, novel molecular targets lack associated high-quality, robust assays suitable for hit finding and development. To bridge this gap, the Scottish Universities Life Sciences Alliance (SULSA) established a fund to develop assays to meet quality criteria such as those of the European Lead Factory. A diverse project portfolio was quickly assembled, and a review of the learnings and successful outcomes showed this fund as a new highly cost-effective model for leveraging significant follow-on resources, training early-career scientists and establishing a culture of translational drug discovery in the academic community. Copyright © 2016 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Second International Conference on Accelerating Biopharmaceutical Development

PubMed Central

2009-01-01

The Second International Conference on Accelerating Biopharmaceutical Development was held in Coronado, California. The meeting was organized by the Society for Biological Engineering (SBE) and the American Institute of Chemical Engineers (AIChE); SBE is a technological community of the AIChE. Bob Adamson (Wyeth) and Chuck Goochee (Centocor) were co-chairs of the event, which had the theme “Delivering cost-effective, robust processes and methods quickly and efficiently.” The first day focused on emerging disruptive technologies and cutting-edge analytical techniques. Day two featured presentations on accelerated cell culture process development, critical quality attributes, specifications and comparability, and high throughput protein formulation development. The final day was dedicated to discussion of technology options and new analysis methods provided by emerging disruptive technologies; functional interaction, integration and synergy in platform development; and rapid and economic purification process development. PMID:20065637

Ballistic Puncture Self-Healing Polymeric Materials

NASA Technical Reports Server (NTRS)

Gordon, Keith L.; Siochi, Emilie J.; Yost, William T.; Bogert, Phil B.; Howell, Patricia A.; Cramer, K. Elliott; Burke, Eric R.

2017-01-01

Space exploration launch costs on the order of $10,000 per pound provide an incentive to seek ways to reduce structural mass while maintaining structural function to assure safety and reliability. Damage-tolerant structural systems provide a route to avoiding weight penalty while enhancing vehicle safety and reliability. Self-healing polymers capable of spontaneous puncture repair show promise to mitigate potentially catastrophic damage from events such as micrometeoroid penetration. Effective self-repair requires these materials to quickly heal following projectile penetration while retaining some structural function during the healing processes. Although there are materials known to possess this capability, they are typically not considered for structural applications. Current efforts use inexpensive experimental methods to inflict damage, after which analytical procedures are identified to verify that function is restored. Two candidate self-healing polymer materials for structural engineering systems are used to test these experimental methods.

What is the appropriate business continuity management staff size?

PubMed

Walch, Damian; Merante, Jason

2008-04-01

This paper explores the question 'how many professionals does it take to build a resilient enterprise?' The paper describes the various segments of a comprehensive business continuity, disaster recovery and crisis management programme and then delves into the variables that determine the appropriate number of professionals required for the company. It is a thought-provoking examination that can help anybody in the `c-suite' examine their particular requirements, characteristics and culture to determine appropriate staffing levels. The reader will have a quantitative approach for determining the size and structure of a resilient enterprise which can provide a solid foundation for a programme that adapts and adjusts quickly and cost-effectively to disasters and events. It can also help build executive support for a programme management office which could ultimately increase the overall success of the programme.

Effectiveness and Usability of the Sensory Processing Measure-Preschool Quick Tips: Data-Driven Intervention Following the Use of the SPM-Preschool in an Early Childhood, Multiple-Case Study

ERIC Educational Resources Information Center

Olson, Carol H.; Henry, Diana A.; Kliner, Ashley Peck; Kyllo, Alissa; Richter, Chelsea Munson; Charley, Jane; Whitcher, Meagan Chapman; Reinke, Katherine Roth; Tysver, Chelsay Horner; Wagner, Lacey; Walworth, Jessica

2016-01-01

This pre- and posttest multiple-case study examined the effectiveness and usability of the Sensory Processing Measure-Preschool Quick Tips (SPM-P QT) by key stakeholders (parents and teachers) for implementing data-driven intervention to address sensory processing challenges. The Sensory Processing Measure-Preschool (SPM-P) was administered as an…

Investigating the effects of methodological expertise and data randomness on the robustness of crowd-sourced SfM terrain models

NASA Astrophysics Data System (ADS)

Ratner, Jacqueline; Pyle, David; Mather, Tamsin

2015-04-01

Structure-from-motion (SfM) techniques are now widely available to quickly and cheaply generate digital terrain models (DTMs) from optical imagery. Topography can change rapidly during disaster scenarios and change the nature of local hazards, making ground-based SfM a particularly useful tool in hazard studies due to its low cost, accessibility, and potential for immediate deployment. Our study is designed to serve as an analogue to potential real-world use of the SfM method if employed for disaster risk reduction purposes. Experiments at a volcanic crater in Santorini, Greece, used crowd-sourced data collection to demonstrate the impact of user expertise and randomization of SfM data on the resultant DTM. Three groups of participants representing variable expertise levels utilized 16 different camera models, including four camera phones, to collect 1001 total photos in one hour of data collection. Datasets collected by each group were processed using the free and open source software VisualSFM. The point densities and overall quality of the resultant SfM point clouds were compared against each other and also against a LiDAR dataset for reference to the industry standard. Our results show that the point clouds are resilient to changes in user expertise and collection method and are comparable or even preferable in data density to LiDAR. We find that 'crowd-sourced' data collected by a moderately informed general public yields topography results comparable to those produced with data collected by experts. This means that in a real-world scenario involving participants with a diverse range of expertise levels, topography models could be produced from crowd-sourced data quite rapidly and to a very high standard. This could be beneficial to disaster risk reduction as a relatively quick, simple, and low-cost method to attain a rapidly updated knowledge of terrain attributes, useful for the prediction and mitigation of many natural hazards.

Economic analysis of revenue losses and control costs associated with the spotted wing drosophila, Drosophila suzukii (Matsumura), in the California raspberry industry.

PubMed

Farnsworth, Derek; Hamby, Kelly A; Bolda, Mark; Goodhue, Rachael E; Williams, Jeffrey C; Zalom, Frank G

2017-06-01

The spotted wing drosophila (SWD), Drosophila suzukii (Matsumura), is an invasive vinegar fly with a preference for infesting commercially viable berries and stone fruits. SWD infestations can reduce yields significantly, necessitating additional management activities. This analysis estimates economic losses in the California raspberry industry that have resulted from the SWD invasion. California raspberry producers experienced considerable revenue losses and management costs in the first years following SWD's invasion of North America. Conventional producers have since developed effective chemical management programs, virtually eliminating revenue losses due to SWD and reducing the cost of management to that of purchasing and applying insecticides more often. Organic raspberry producers, who do not have access to the same chemical controls, continue to confront substantial SWD-related revenue losses. These losses can be mitigated only by applying expensive insecticides registered for organic use and by performing labor-intensive field sanitation. SWD's invasion into North America has caused extensive crop losses to berry and cherry crops in California and elsewhere. Agricultural producers and researchers have responded quickly to this pest by developing management programs that significantly reduce revenue losses. Economic losses are expected to continue to fall as producers learn to manage SWD more efficiently and as new control tactics become available. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Feasibility of utilizing the SD BIOLINE Onchocerciasis IgG4 rapid test in onchocerciasis surveillance in Senegal.

PubMed

Dieye, Yakou; Storey, Helen L; Barrett, Kelsey L; Gerth-Guyette, Emily; Di Giorgio, Laura; Golden, Allison; Faulx, Dunia; Kalnoky, Michael; Ndiaye, Marie Khemesse Ngom; Sy, Ngayo; Mané, Malang; Faye, Babacar; Sarr, Mamadou; Dioukhane, Elhadji Mamadou; Peck, Roger B; Guinot, Philippe; de Los Santos, Tala

2017-10-01

As effective onchocerciasis control efforts in Africa transition to elimination efforts, different diagnostic tools are required to support country programs. Senegal, with its long standing, successful control program, is transitioning to using the SD BIOLINE Onchocerciasis IgG4 (Ov16) rapid test over traditional skin snip microscopy. The aim of this study is to demonstrate the feasibility of integrating the Ov16 rapid test into onchocerciasis surveillance activities in Senegal, based on the following attributes of acceptability, usability, and cost. A cross-sectional study was conducted in 13 villages in southeastern Senegal in May 2016. Individuals 5 years and older were invited to participate in a demographic questionnaire, an Ov16 rapid test, a skin snip biopsy, and an acceptability interview. Rapid test technicians were interviewed and a costing analysis was conducted. Of 1,173 participants, 1,169 (99.7%) agreed to the rapid test while 383 (32.7%) agreed to skin snip microscopy. The sero-positivity rate of the rapid test among those tested was 2.6% with zero positives 10 years and younger. None of the 383 skin snips were positive for Ov microfilaria. Community members appreciated that the rapid test was performed quickly, was not painful, and provided reliable results. The total costs for this surveillance activity was $22,272.83, with a cost per test conducted at $3.14 for rapid test, $7.58 for skin snip microscopy, and $13.43 for shared costs. If no participants had refused skin snip microscopy, the total cost per method with shared costs would have been around $16 per person tested. In this area with low onchocerciasis sero-positivity, there was high acceptability and perceived value of the rapid test by community members and technicians. This study provides evidence of the feasibility of implementing the Ov16 rapid test in Senegal and may be informative to other country programs transitioning to Ov16 serologic tools.

Feasibility of utilizing the SD BIOLINE Onchocerciasis IgG4 rapid test in onchocerciasis surveillance in Senegal

PubMed Central

Dieye, Yakou; Barrett, Kelsey L.; Gerth-Guyette, Emily; Di Giorgio, Laura; Golden, Allison; Faulx, Dunia; Kalnoky, Michael; Ndiaye, Marie Khemesse Ngom; Sy, Ngayo; Mané, Malang; Faye, Babacar; Sarr, Mamadou; Dioukhane, Elhadji Mamadou; Peck, Roger B.; Guinot, Philippe; de los Santos, Tala

2017-01-01

As effective onchocerciasis control efforts in Africa transition to elimination efforts, different diagnostic tools are required to support country programs. Senegal, with its long standing, successful control program, is transitioning to using the SD BIOLINE Onchocerciasis IgG4 (Ov16) rapid test over traditional skin snip microscopy. The aim of this study is to demonstrate the feasibility of integrating the Ov16 rapid test into onchocerciasis surveillance activities in Senegal, based on the following attributes of acceptability, usability, and cost. A cross-sectional study was conducted in 13 villages in southeastern Senegal in May 2016. Individuals 5 years and older were invited to participate in a demographic questionnaire, an Ov16 rapid test, a skin snip biopsy, and an acceptability interview. Rapid test technicians were interviewed and a costing analysis was conducted. Of 1,173 participants, 1,169 (99.7%) agreed to the rapid test while 383 (32.7%) agreed to skin snip microscopy. The sero-positivity rate of the rapid test among those tested was 2.6% with zero positives 10 years and younger. None of the 383 skin snips were positive for Ov microfilaria. Community members appreciated that the rapid test was performed quickly, was not painful, and provided reliable results. The total costs for this surveillance activity was $22,272.83, with a cost per test conducted at $3.14 for rapid test, $7.58 for skin snip microscopy, and $13.43 for shared costs. If no participants had refused skin snip microscopy, the total cost per method with shared costs would have been around $16 per person tested. In this area with low onchocerciasis sero-positivity, there was high acceptability and perceived value of the rapid test by community members and technicians. This study provides evidence of the feasibility of implementing the Ov16 rapid test in Senegal and may be informative to other country programs transitioning to Ov16 serologic tools. PMID:28972982

High fidelity 3-dimensional models of beam-electron cloud interactions in circular accelerators

NASA Astrophysics Data System (ADS)

Feiz Zarrin Ghalam, Ali

Electron cloud is a low-density electron profile created inside the vacuum chamber of circular machines with positively charged beams. Electron cloud limits the peak current of the beam and degrades the beams' quality through luminosity degradation, emittance growth and head to tail or bunch to bunch instability. The adverse effects of electron cloud on long-term beam dynamics becomes more and more important as the beams go to higher and higher energies. This problem has become a major concern in many future circular machines design like the Large Hadron Collider (LHC) under construction at European Center for Nuclear Research (CERN). Due to the importance of the problem several simulation models have been developed to model long-term beam-electron cloud interaction. These models are based on "single kick approximation" where the electron cloud is assumed to be concentrated at one thin slab around the ring. While this model is efficient in terms of computational costs, it does not reflect the real physical situation as the forces from electron cloud to the beam are non-linear contrary to this model's assumption. To address the existing codes limitation, in this thesis a new model is developed to continuously model the beam-electron cloud interaction. The code is derived from a 3-D parallel Particle-In-Cell (PIC) model (QuickPIC) originally used for plasma wakefield acceleration research. To make the original model fit into circular machines environment, betatron and synchrotron equations of motions have been added to the code, also the effect of chromaticity, lattice structure have been included. QuickPIC is then benchmarked against one of the codes developed based on single kick approximation (HEAD-TAIL) for the transverse spot size of the beam in CERN-LHC. The growth predicted by QuickPIC is less than the one predicted by HEAD-TAIL. The code is then used to investigate the effect of electron cloud image charges on the long-term beam dynamics, particularly on the transverse tune shift of the beam at CERN Super Proton Synchrotron (SPS) ring. The force from the electron cloud image charges on the beam cancels the force due to cloud compression formed on the beam axis and therefore the tune shift is mainly due to the uniform electron cloud density. (Abstract shortened by UMI.)

M & V Shootout: Setting the Stage For Testing the Performance of New Energy Baseline

DOE Office of Scientific and Technical Information (OSTI.GOV)

Touzani, Samir; Custodio, Claudine; Sohn, Michael

Trustworthy savings calculations are critical to convincing investors in energy efficiency projects of the benefit and cost-effectiveness of such investments and their ability to replace or defer supply-side capital investments. However, today’s methods for measurement and verification (M&V) of energy savings constitute a significant portion of the total costs of efficiency projects. They also require time-consuming data acquisition and often do not deliver results until years after the program period has ended. A spectrum of savings calculation approaches are used, with some relying more heavily on measured data and others relying more heavily on estimated or modeled data, or stipulatedmore » information. The rising availability of “smart” meters, combined with new analytical approaches to quantifying savings, has opened the door to conducting M&V more quickly and at lower cost, with comparable or improved accuracy. Energy management and information systems (EMIS) technologies, not only enable significant site energy savings, but are also beginning to offer M&V capabilities. This paper expands recent analyses of public-domain, whole-building M&V methods, focusing on more novel baseline modeling approaches that leverage interval meter data. We detail a testing procedure and metrics to assess the performance of these new approaches using a large test dataset. We also provide conclusions regarding the accuracy, cost, and time trade-offs between more traditional M&V and these emerging streamlined methods. Finally, we discuss the potential evolution of M&V to better support the energy efficiency industry through low-cost approaches, and the long-term agenda for validation of building energy analytics.« less

The burden of acute myocardial infarction after a regional cardiovascular center project in Korea.

PubMed

Kim, Arim; Yoon, Seok-Jun; Kim, Young-Ae; Kim, Eun Jung

2015-10-01

The aim of this study was to examine the impact of a government-directed regional cardiovascular center (RCVC) project on the length of stay (LOS) and medical costs due to acute myocardial infarction (AMI). A retrospective claim data review. Forty hospitals including four RCVCs in Korea. A total of 1469 AMI patients who visited a RCVC in two regions between February 2009 and December 2011. RCVC project has been fostering specialized center by region for management of cardiovascular disease. It has built a system that could receive intensive care quickly within 3 h when disease occurred. Changes in the LOS and cost were evaluated using the difference-in-differences (DIDs) method combined with propensity score matching (1:1) and multilevel analysis with adjustment for patient's and institutional factors. The net effect of RCVC project implementation showed decline of LOS (-0.71 days) and total medical costs (-797 US dollars) by DID. After the RCVC project, the LOS for patients with AMI hospitalized in a RCVC was decreased by 8.9% (β = -0.094, P = 0.041) compared with patients hospitalized in a hospital not designed as a RCVC. Compared with costs before the RCVC project, they were decreased by 11.5% (β = -0.122, P = 0.004). We provided evidence regarding the change in the societal burden due to AMI after regionalization. Although there was a reduction of LOS and direct medical costs reported in limited number of regionalized hospitals, in the long term we can anticipate an expanding impact in all regionalized hospitals. © The Author 2015. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

QuickNGS elevates Next-Generation Sequencing data analysis to a new level of automation.

PubMed

Wagle, Prerana; Nikolić, Miloš; Frommolt, Peter

2015-07-01

Next-Generation Sequencing (NGS) has emerged as a widely used tool in molecular biology. While time and cost for the sequencing itself are decreasing, the analysis of the massive amounts of data remains challenging. Since multiple algorithmic approaches for the basic data analysis have been developed, there is now an increasing need to efficiently use these tools to obtain results in reasonable time. We have developed QuickNGS, a new workflow system for laboratories with the need to analyze data from multiple NGS projects at a time. QuickNGS takes advantage of parallel computing resources, a comprehensive back-end database, and a careful selection of previously published algorithmic approaches to build fully automated data analysis workflows. We demonstrate the efficiency of our new software by a comprehensive analysis of 10 RNA-Seq samples which we can finish in only a few minutes of hands-on time. The approach we have taken is suitable to process even much larger numbers of samples and multiple projects at a time. Our approach considerably reduces the barriers that still limit the usability of the powerful NGS technology and finally decreases the time to be spent before proceeding to further downstream analysis and interpretation of the data.

Effects of polishing on surface roughness, gloss, and color of resin composites.

PubMed

Hosoya, Yumiko; Shiraishi, Takanobu; Odatsu, Tetsuro; Nagafuji, Junichi; Kotaku, Mayumi; Miyazaki, Masashi; Powers, John M

2011-09-01

This study evaluated the effects of polishing on surface roughness, gloss, and color of regular, opaque, and enamel shades for each of three resin composites. Two-mm-thick resin disks made with Estelite Σ Quick, Clearfil Majesty, and Beautifil II were final polished with 180-, 1000-, and 3000-grit silicon carbide paper. Surface roughness, gloss, and color were measured one week after curing. Estelite Σ Quick had significantly lower roughness values and significantly higher gloss values as compared with Clearfil Majesty and Beautifil II. The effects of surface roughness and gloss on color (L*a*b*) differed among resin composites and by shade. Correlation coefficients between surface roughness and L*a*b* color factors were generally high for Clearfil Majesty, partially high (i.e., between roughness and L*) for Beautifil II, and low for Estelite Σ Quick. Correlation coefficients between gloss and L*a*b* color parameters were generally high for Beautifil II and low for Estelite Σ Quick and Clearfil Majesty. However, for all resin composites, the values of the color differences between 3000-grit and 180-grit polishing groups for all shades were imperceptible by the naked eye.

[Economic aspects of oncological esophageal surgery : Centralization is essential].

PubMed

von Dercks, N; Gockel, I; Mehdorn, M; Lorenz, D

2017-01-01

The incidence of esophageal carcinoma has increased in recent years in Germany. The aim of this article is a discussion of the economic aspects of oncological esophageal surgery within the German diagnosis-related groups (DRG) system focusing on the association between minimum caseload requirements and outcome quality as well as costs. The margins for the DRG classification G03A are low and quickly exhausted if complications determine the postoperative course. A current study using nationwide German hospital discharge data proved a significant difference in hospital mortality between clinics with and without achieving the minimum caseload requirements for esophagectomy. Data from the USA clearly showed that besides patient-relevant parameters, the caseload of a surgeon is relevant for the cost of treatment. Such cost-related analyses do not exist in Germany at present. Scientific validation of reliable minimum caseload numbers for oncological esophagectomy is desirable in the future.

Enhanced quasi-static particle-in-cell simulation of electron cloud instabilities in circular accelerators

NASA Astrophysics Data System (ADS)

Feng, Bing

Electron cloud instabilities have been observed in many circular accelerators around the world and raised concerns of future accelerators and possible upgrades. In this thesis, the electron cloud instabilities are studied with the quasi-static particle-in-cell (PIC) code QuickPIC. Modeling in three-dimensions the long timescale propagation of beam in electron clouds in circular accelerators requires faster and more efficient simulation codes. Thousands of processors are easily available for parallel computations. However, it is not straightforward to increase the effective speed of the simulation by running the same problem size on an increasingly number of processors because there is a limit to domain size in the decomposition of the two-dimensional part of the code. A pipelining algorithm applied on the fully parallelized particle-in-cell code QuickPIC is implemented to overcome this limit. The pipelining algorithm uses multiple groups of processors and optimizes the job allocation on the processors in parallel computing. With this novel algorithm, it is possible to use on the order of 102 processors, and to expand the scale and the speed of the simulation with QuickPIC by a similar factor. In addition to the efficiency improvement with the pipelining algorithm, the fidelity of QuickPIC is enhanced by adding two physics models, the beam space charge effect and the dispersion effect. Simulation of two specific circular machines is performed with the enhanced QuickPIC. First, the proposed upgrade to the Fermilab Main Injector is studied with an eye upon guiding the design of the upgrade and code validation. Moderate emittance growth is observed for the upgrade of increasing the bunch population by 5 times. But the simulation also shows that increasing the beam energy from 8GeV to 20GeV or above can effectively limit the emittance growth. Then the enhanced QuickPIC is used to simulate the electron cloud effect on electron beam in the Cornell Energy Recovery Linac (ERL) due to extremely small emittance and high peak currents anticipated in the machine. A tune shift is discovered from the simulation; however, emittance growth of the electron beam in electron cloud is not observed for ERL parameters.

Buses retrofitting with diesel particle filters: Real-world fuel economy and roadworthiness test considerations.

PubMed

Fleischman, Rafael; Amiel, Ran; Czerwinski, Jan; Mayer, Andreas; Tartakovsky, Leonid

2018-05-01

Retrofitting older vehicles with diesel particulate filter (DPF) is a cost-effective measure to quickly and efficiently reduce particulate matter emissions. This study experimentally analyzes real-world performance of buses retrofitted with CRT DPFs. 18 in-use Euro III technology urban and intercity buses were investigated for a period of 12months. The influence of the DPF and of the vehicle natural aging on buses fuel economy are analyzed and discussed. While the effect of natural deterioration is about 1.2%-1.3%, DPF contribution to fuel economy penalty is found to be 0.6% to 1.8%, depending on the bus type. DPF filtration efficiency is analyzed throughout the study and found to be in average 96% in the size range of 23-560nm. Four different load and non-load engine operating modes are investigated on their appropriateness for roadworthiness tests. High idle is found to be the most suitable regime for PN diagnostics considering particle number filtration efficiency. Copyright © 2017. Published by Elsevier B.V.

The impact of economic recession on infection prevention and control.

PubMed

O'Riordan, M; Fitzpatrick, F

2015-04-01

The economic recession that began in 2007 led to austerity measures and public sector cutbacks in many European countries. Reduced resource allocation to infection prevention and control (IPC) programmes is impeding prevention and control of tuberculosis, HIV and vaccine-preventable infections. In addition, higher rates of infectious disease in the community have a significant impact on hospital services, although the extent of this has not been studied. With a focus on quick deficit reduction, preventive services such IPC may be regarded as non-essential. Where a prevention programme succeeds in reducing disease burden to a low level, its very success can undermine the perceived need for the programme. To mitigate the negative effects of recession, we need to: educate our political leaders about the economic benefits of IPC; better quantify the costs of healthcare-associated infection; and evaluate the effects of budget cuts on healthcare outcomes and IPC activities. Copyright © 2015 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

Radio astronomy ultra-low-noise amplifier for operation at 91 cm wavelength in high RFI environment

NASA Astrophysics Data System (ADS)

Korolev, A. M.; Zakharenko, V. V.; Ulyanov, O. M.

2016-02-01

An ultra-low-noise input amplifier intended for a use in a radio telescope operating at 91 cm wavelength is presented. The amplifier noise temperatures are 12.8 ± 1.5 and 10.0 ± 1.5 K at ambient temperatures of 293 and 263 K respectively. The amplifier does not require cryogenic cooling. It can be quickly put in operation thus shortening losses in the telescope observation time. High linearity of the amplifier (output power at 1 dB gain compression P1dB ≥ 22 dBm, output third order intercept point OIP3 ≥ 37 dBm) enables the telescope operation in highly urbanized and industrialized regions. To obtain low noise characteristics along with high linearity, high-electron-mobility field-effect transistors were used in parallel in the circuit developed. The transistors used in the amplifier are cost-effective and commercially available. The circuit solution is recommended for similar devices working in ultra-high frequency band.

Through-transmission laser welding of glass fibre composite: Experimental light scattering identification

NASA Astrophysics Data System (ADS)

Cosson, Benoit; Asséko, André Chateau Akué; Dauphin, Myriam

2018-05-01

The purpose of this paper is to develop a cost-effective, efficient and quick to implement experimental optical method in order to predict the optical properties (extinction coefficient) of semi-transparent polymer composites. The extinction coefficient takes into account the effects due to the absorption and the scattering phenomena in a semi-transparent component during the laser processes, i.e. TTLW (through-transmission laser welding). The present method used a laser as light source and a reflex camera equipped with a macro lens as a measurement device and is based on the light transmission measurement through different thickness samples. The interaction between the incident laser beam and the semi-transparent composite is exanimated. The results are presented for the case of a semi-transparent composite reinforced with the unidirectional glass fiber (UD). A numerical method, ray tracing, is used to validate the experimental results. The ray tracing method is appropriate to characterize the light-scattering phenomenon in semi-transparent materials.

SPlinted Ligation Adapter Tagging (SPLAT), a novel library preparation method for whole genome bisulphite sequencing

PubMed Central

Manlig, Erika; Wahlberg, Per

2017-01-01

Abstract Sodium bisulphite treatment of DNA combined with next generation sequencing (NGS) is a powerful combination for the interrogation of genome-wide DNA methylation profiles. Library preparation for whole genome bisulphite sequencing (WGBS) is challenging due to side effects of the bisulphite treatment, which leads to extensive DNA damage. Recently, a new generation of methods for bisulphite sequencing library preparation have been devised. They are based on initial bisulphite treatment of the DNA, followed by adaptor tagging of single stranded DNA fragments, and enable WGBS using low quantities of input DNA. In this study, we present a novel approach for quick and cost effective WGBS library preparation that is based on splinted adaptor tagging (SPLAT) of bisulphite-converted single-stranded DNA. Moreover, we validate SPLAT against three commercially available WGBS library preparation techniques, two of which are based on bisulphite treatment prior to adaptor tagging and one is a conventional WGBS method. PMID:27899585

User engineering: A new look at system engineering

NASA Technical Reports Server (NTRS)

Mclaughlin, Larry L.

1987-01-01

User Engineering is a new System Engineering perspective responsible for defining and maintaining the user view of the system. Its elements are a process to guide the project and customer, a multidisciplinary team including hard and soft sciences, rapid prototyping tools to build user interfaces quickly and modify them frequently at low cost, and a prototyping center for involving users and designers in an iterative way. The main consideration is reducing the risk that the end user will not or cannot effectively use the system. The process begins with user analysis to produce cognitive and work style models, and task analysis to produce user work functions and scenarios. These become major drivers of the human computer interface design which is presented and reviewed as an interactive prototype by users. Feedback is rapid and productive, and user effectiveness can be measured and observed before the system is built and fielded. Requirements are derived via the prototype and baselined early to serve as an input to the architecture and software design.

Creating New Economic Incentives for Repurposing Generic Drugs for Unsolved Diseases Using Social Finance.

PubMed

Bloom, Bruce E

2015-12-01

Repurposing research improves patient lives by taking drugs approved for one disease and clinically testing them to create a treatment for a different disease. Repurposing drugs that are generic, inexpensive, and widely available and that can be taken in their current dosage and formulation in the new indication provide a quick, affordable, and effective way to create "new" treatments. However, generic drug repurposing often provides no profit potential, and so there is no economic incentive for industry to pursue this, and philanthropy and government funds are often insufficient. One way to create new economic incentive for the repurposing of generic drugs is through social finance. This perspective describes how social finance can create a new economic incentive by using a social impact bond, or similar financial structure, to repay for-profit investors who fund the repurposing research from the proceeds of healthcare cost reductions generated when these affordable, effective, and widely available repurposed therapies improve healthcare outcomes.

The Affordable Care Act: a case study for understanding and applying complexity concepts to health care reform.

PubMed

Larkin, D Justin; Swanson, R Chad; Fuller, Spencer; Cortese, Denis A

2016-02-01

The current health system in the United States is the result of a history of patchwork policy decisions and cultural assumptions that have led to persistent contradictions in practice, gaps in coverage, unsustainable costs, and inconsistent outcomes. In working toward a more efficient health system, understanding and applying complexity science concepts will allow for policy that better promotes desired outcomes and minimizes the effects of unintended consequences. This paper will consider three applied complexity science concepts in the context of the Patient Protection and Affordable Care Act (PPACA): developing a shared vision around reimbursement for value, creating an environment for emergence through simple rules, and embracing transformational leadership at all levels. Transforming the US health system, or any other health system, will be neither easy nor quick. Applying complexity concepts to health reform efforts, however, will facilitate long-term change in all levels, leading to health systems that are more effective, efficient, and equitable. © 2014 John Wiley & Sons, Ltd.

Distributed sensor network for local-area atmospheric modeling

NASA Astrophysics Data System (ADS)

French, Patrick D.; Lovell, John S.; Seaman, Nelson L.

2003-09-01

In the event of a Weapons of Mass Destruction (WMD) chemical or radiological release, quick identification of the nature and source of the release can support efforts to warn, protect and evacuate threatened populations downwind; mitigate the release; provide more accurate plume forecasting; and collect critical transient evidence to help identify the perpetrator(s). Although there are systems available to assist in tracking a WMD release and then predicting where a plume may be traveling, there are no reliable systems available to determine the source location of that release. This would typically require the timely deployment of a remote sensing capability, a grid of expendable air samplers, or a surface sampling plan if the plume has dissipated. Each of these typical solutions has major drawbacks (i.e.: excessive cost, technical feasibility, duration to accomplish, etc...). This paper presents data to support the use of existing rapid-response meteorological modeling coupled with existing transport and diffusion modeling along with a prototype cost-effective situational awareness monitor which would reduce the sensor network requirements while still accomplishing the overall mission of having a 95% probability in converging on a source location within 100 meters.

Satellite Ocean Color Validation Using Merchant Ships. Chapter 10

NASA Technical Reports Server (NTRS)

Frouin, Robert; Cutchin, David L.; Deschamps, Pierre-Yves

2001-01-01

A collaborative measurement program for evaluating satellite-derived ocean color has been developed based on ships of opportunity (merchant, oceanographic) and specific instrumentation, the SIMBAD radiometer. The purpose of the measurement program is to complement, in a cost-effective way, dedicated evaluation experiments at sea, which are expensive, cannot be carried out over the full range of expected oceanic and atmospheric conditions, and generally provide a few match-ups. Ships participate in the program on a volunteer basis or at a very small cost, and measurement procedures do not interfere with other ship activities. The SIMBAD radiometer is a portable, easy-to-operate instrument that measures the basic ocean color variables, namely aerosol optical thickness and water-leaving radiance, in typical spectral bands of ocean-color sensors, i.e., 443, 490, 560, 670, and 870 nm. Measuring these variables at the time of satellite overpass is usually sufficient to verify satellite-derived ocean color and to evaluate atmospheric correction algorithms. Any ordinary crew can learn quickly how to make measurements. Importantly, the ship is not required to stop, making it possible to collect data along regular routes traveled by merchant ships in the world's oceans.

An architecture for efficient gravitational wave parameter estimation with multimodal linear surrogate models

NASA Astrophysics Data System (ADS)

O'Shaughnessy, Richard; Blackman, Jonathan; Field, Scott E.

2017-07-01

The recent direct observation of gravitational waves has further emphasized the desire for fast, low-cost, and accurate methods to infer the parameters of gravitational wave sources. Due to expense in waveform generation and data handling, the cost of evaluating the likelihood function limits the computational performance of these calculations. Building on recently developed surrogate models and a novel parameter estimation pipeline, we show how to quickly generate the likelihood function as an analytic, closed-form expression. Using a straightforward variant of a production-scale parameter estimation code, we demonstrate our method using surrogate models of effective-one-body and numerical relativity waveforms. Our study is the first time these models have been used for parameter estimation and one of the first ever parameter estimation calculations with multi-modal numerical relativity waveforms, which include all \\ell ≤slant 4 modes. Our grid-free method enables rapid parameter estimation for any waveform with a suitable reduced-order model. The methods described in this paper may also find use in other data analysis studies, such as vetting coincident events or the computation of the coalescing-compact-binary detection statistic.

Oleaginous Microalgae from Dairy Farm Wastewater for Biodiesel Production: Isolation, Characterization and Mass Cultivation.

PubMed

Sun, Zheng; Fang, Xiao-Peng; Li, Xiao-Yang; Zhou, Zhi-Gang

2018-02-01

Producing biodiesel from microalgae grown in wastewater is environment-friendly and cost-effective. The present study investigated the algae found in wastewater of a local dairy farm for their potential as biodiesel feedstocks. Thirteen native algal strains were isolated. On the basis of morphology and 16S/18S rRNA gene sequences, one strain was identified to be a member of cyanobacteria, while other 12 strains belong to green algae. After screening, two Scenedesmus strains out of the 13 microalgae isolates demonstrated superiority in growth rate, lipid productivity, and sedimentation properties, and therefore were selected for further scale-up outdoor cultivation. Both Scenedesmus strains quickly adapted to the outdoor conditions, exhibiting reasonably good growth and strong anti-contamination capabilities. In flat-plate photobioreactors (PBRs), algal cells accumulated predominantly neutral lipids that accounted for over 60% of total lipids with almost 70% being triacylglycerol. In addition, Scenedesmus obliquus had a high content of monounsaturated fatty acids, of which the amount of oleic acid (C18:1) was up to 27.11%. Based on these findings, the dairy farm wastewater-isolated Scenedesmus strains represent promising sources of low-cost, high-quality oil for biofuel production.

Empowering a safer practice: PDAs are integral tools for nursing and health care.

PubMed

Hudson, Kathleen; Buell, Virginia

2011-04-01

This study's purpose was to assess the characteristics of personal digital assistant (PDA) uptake and use in both clinical and classroom work for baccalaureate student nurses (BSN) within a rural Texas university. Patient care has become more complicated, risk prone, automated and costly. Efficiencies at the bedside are needed to continue to provide safe and successful within this environment. Purposive sample of nursing students using PDAs throughout their educational processes, conducted at three campus sites. The initial sample size was 105 students, followed by 94 students at end of the first semester and 75 students at curriculum completion at the end of a 2-year period. Students completed structured and open-ended questions to assess their perspectives on PDA usage. Student uptake varied in relation to overall competency, with minimal to high utilization noted, and was influenced by the current product costs. PDAs are developing into useful clinical tools by providing quick and important information for safer care. Using bedside PDAs effectively assists with maintaining patient safety, efficiency of care delivery and staff satisfaction. This study evaluates the initial implementation of PDAs by students, our future multitasking nurses. © 2011 The Authors. Journal compilation © 2011 Blackwell Publishing Ltd.

Talk with Tiff: teen's inquiries to a sexual health website.

PubMed

Buzi, Ruth S; Smith, Peggy B; Barrera, Cristina

2015-01-01

Because of its availability, anonymity, and low cost of access, the Internet is an increasingly common way for adolescents to find information about sensitive issues. Sexual health website question portals are an important way for adolescents to seek personalized information tailored to their individualized needs. Few studies have examined the content within anonymous e-mails sent to these question portals. The purpose of this qualitative evaluation was to analyze thematic content of anonymous e-mails sent through a question portal on a comprehensive sexual health clinic website for an adolescent family planning clinic in a large city in the southwest United States. Between August 2009 and June 2012, the e-mail server received questions from 484 individuals who were seeking sexual health-related information. The authors used a content analysis to identify recurrent themes in the questions submitted. The most common questions regarded the cost of the clinic's services and testing for sexually transmitted diseases. The questions revealed that adolescents lack basic sexual health knowledge and hold many misconceptions. The findings support the usefulness of online question portals as effective venues for teenagers to quickly and anonymously obtain accurate information on sensitive issues.

Cellulase recycling in biorefineries--is it possible?

PubMed

Gomes, Daniel; Rodrigues, Ana Cristina; Domingues, Lucília; Gama, Miguel

2015-05-01

On a near future, bio-based economy will assume a key role in our lives. Lignocellulosic materials (e.g., agroforestry residues, industrial/solid wastes) represent a cheaper and environmentally friendly option to fossil fuels. Indeed, following suitable processing, they can be metabolized by different microorganisms to produce a wide range of compounds currently obtained by chemical synthesis. However, due to the recalcitrant nature of these materials, they cannot be directly used by microorganisms, the conversion of polysaccharides into simpler sugars being thus required. This conversion, which is usually undertaken enzymatically, represents a significant part on the final cost of the process. This fact has driven intense efforts on the reduction of the enzyme cost following different strategies. Here, we describe the fundamentals of the enzyme recycling technology, more specifically, cellulase recycling. We focus on the main strategies available for the recovery of both the liquid- and solid-bound enzyme fractions and discuss the relevant operational parameters (e.g., composition, temperature, additives, and pH). Although the efforts from the industry and enzyme suppliers are primarily oriented toward the development of enzyme cocktails able to quickly and effectively process biomass, it seems clear by now that enzyme recycling is technically possible.

Development of Metallic Thermal Protection Systems for the Reusable Launch Vehicle

NASA Technical Reports Server (NTRS)

Blosser, Max L.

1996-01-01

A reusable Thermal Protection System (TPS) that is not only lightweight, but durable, operable and cost effective is one of the technologies required by the Reusable Launch Vehicle (RLV) to achieve the goal of drastically reducing the cost of delivering payload to orbit. Metallic TPS is one of the systems being developed to meet this challenge. Current efforts involve improving the superalloy honeycomb TPS concept, which consists of a foil-gage metallic box encapsulating a low density fibrous insulation, and evaluating it for RLV requirements. The superalloy honeycomb TPS concept is mechanically attached to the vehicle structure. Improvements include more efficient internal insulation, a simpler, lighter weight configuration, and a quick-release fastener system for easier installation and removal. Evaluation includes thermal and structural analysis, fabrication and testing of both coupons and TPS panels under conditions simulating RLV environments. Coupons of metallic honeycomb sandwich, representative of the outer TPS surface, were subjected to low speed impact, hypervelocity impact, and rain erosion testing as well as subsequent arcjet exposure. Arrays of TPS panels have been subjected to radiant heating in a thermal/vacuum facility, aerodynamic heating in an arcjet facility and acoustic loading.

Examining the existence of the underwriting cycle in managed care organizations.

PubMed

Brotman, B A

2000-01-01

This article examines the existence of the underwriting or profitability cycle in the health insurance industry. Researchers have reported that a six-year cycle exists for health care insurers. That is, three years of profits then are followed by three years of losses. This article suggests that insurers react more quickly to losses and adjust their cost structures almost immediately. Health insurers react to both expected changes and current increases in the payoff ratio.

Generalized Intelligent Framework for Tutoring (GIFT) Cloud/Virtual Open Campus Quick Start Guide (Revision 1)

DTIC Science & Technology

2017-06-01

for GIFT Cloud, the web -based application version of the Generalized Intelligent Framework for Tutoring (GIFT). GIFT is a modular, open-source...external applications. GIFT is available to users with a GIFT Account at no cost. GIFT Cloud is an implementation of GIFT. This web -based application...section. Approved for public release; distribution is unlimited. 3 3. Requirements for GIFT Cloud GIFT Cloud is accessed via a web browser

Multi-track financing.

PubMed

Kennedy, Steven W; Randolph, John; Taddey, Anthony J

2012-05-01

In today's uncertain economic environment, when seeking to finance a capital project, healthcare borrowers should adopt a multi-tracked funding strategy that permits them to change capital-funding routes quickly in response to changing circumstances. The multi-tracking process requires two stages prior to securing a commitment and beginning the closing process: due diligence and indication of interest. This process should present no material additional cost during these two stages, giving healthcare borrowers the flexibility to explore a variety of financing options.

Assistance Focus: Asia/Pacific Region; Clean Energy Solutions Center (CESC)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The Clean Energy Solutions Center Ask an Expert service connects governments seeking policy information and advice with one of more than 30 global policy experts who can provide reliable and unbiased quick-response advice and information. The service is available at no cost to government agency representatives from any country and the technical institutes assisting them. This publication presents summaries of assistance provided to governments in the Asia/Pacific region, including the benefits of that assistance.

[Outpatient breast surgery].

PubMed

Cappel, J; Lüders, K

1980-01-24

Indication, standard operative procedure and technique of ambulant diagnostic mammary surgery is shown in detail from 15 years of experience. In respect of reducing costs intraoperative quick-frozen sections and in case of malignancy radical mastectomy immediately after biopsy during continuous general anesthesia is important. By retrospective analysis we could prove that operative results in treatment of benign breast tumors by out-patient surgery or otherwise for in-patients do not differ. According to an inquiry patients preferred by 60% out-patient procedure.

Initial Management of Traumatic Wounds.

PubMed

Devriendt, Nausikaa; de Rooster, Hilde

2017-11-01

When traumatic wounds are quickly and accurately treated, morbidity and costs can be significantly decreased. Several factors, such as time delay between injury and treatment, the degree of contamination, extension and depth of the wound, and the mechanism of injury, influence the treatment and prognosis and stress the importance of a patient-specific approach. Although all traumatic wounds are contaminated, antibiotic therapy is seldom required if correct wound management is installed. Copyright © 2017 Elsevier Inc. All rights reserved.

Three-dimensional quick response code based on inkjet printing of upconversion fluorescent nanoparticles for drug anti-counterfeiting.

PubMed

You, Minli; Lin, Min; Wang, Shurui; Wang, Xuemin; Zhang, Ge; Hong, Yuan; Dong, Yuqing; Jin, Guorui; Xu, Feng

2016-05-21

Medicine counterfeiting is a serious issue worldwide, involving potentially devastating health repercussions. Advanced anti-counterfeit technology for drugs has therefore aroused intensive interest. However, existing anti-counterfeit technologies are associated with drawbacks such as the high cost, complex fabrication process, sophisticated operation and incapability in authenticating drug ingredients. In this contribution, we developed a smart phone recognition based upconversion fluorescent three-dimensional (3D) quick response (QR) code for tracking and anti-counterfeiting of drugs. We firstly formulated three colored inks incorporating upconversion nanoparticles with RGB (i.e., red, green and blue) emission colors. Using a modified inkjet printer, we printed a series of colors by precisely regulating the overlap of these three inks. Meanwhile, we developed a multilayer printing and splitting technology, which significantly increases the information storage capacity per unit area. As an example, we directly printed the upconversion fluorescent 3D QR code on the surface of drug capsules. The 3D QR code consisted of three different color layers with each layer encoded by information of different aspects of the drug. A smart phone APP was designed to decode the multicolor 3D QR code, providing the authenticity and related information of drugs. The developed technology possesses merits in terms of low cost, ease of operation, high throughput and high information capacity, thus holds great potential for drug anti-counterfeiting.

Cutting costs in response to predatory threat by Geoffroy's marmosets (Callithrix geoffroyi).

PubMed

Caine, N G

1998-01-01

Ideally, prey should respond to their predators efficiently, without over- or underreacting to the threat. This may be particularly important for small-bodied species for whom metabolic demands are high and predatory risk is great. In the current study, two family groups of Callithrix geoffroyi living outside in a rural setting at the Center for Reproduction of Endangered Species, San Diego Wild Animal Park, were observed before, during, and after ten presentations of a great horned owl model. The owl was mounted on a post on a nearby hillside, simulating a situation in which a real but nonimminent threat is posed. As controls, a model of a crow and a cloth bag were also presented, each for ten trials. During the 10 min presentations of the owl, rates of play and foraging decreased, and rates of locomotion and vigilant looking increased from baseline rates. Data on occupation of the best viewing area suggest that the marmosets shared the job of monitoring a potential threat. After the owl was removed, behavior quickly returned to baseline rates, with the exception of looking at the place where the owl had been, and play. Neither the bag nor the crow generated significant differences from the baseline condition that preceded it. Marmosets may reduce the costs of antipredator behavior by appropriately assessing the degree of risk and by quickly resuming important activities once a potential threat has passed.

Lunar Transportation Facilities and Operations Study, option 1

NASA Astrophysics Data System (ADS)

1991-05-01

Throughout the Option I period of the Lunar Transportation Facilities and Operations Study (LTFOS), McDonnell Douglas Space Systems Company - Kennedy Space Center (MDSSC-KSC) provided support to both the Planetary Surface Systems (PSS) Office at the National Aeronautics and Space Administration (NASA) at the Johnson Space Center and to the Flight and Ground Systems Projects Office (Payload Projects Management) at the Kennedy Space Center. The primary objective of the Option I phase of the study was to assist the above NASA centers in developing Space Exploration Initiative (SEI) concepts. MDSSC-KSC conducted three analyses which provided launch and landing detail to the proposed exploration concepts. One analysis, the Lunar Ejecta Assessment, was conducted to determine the effects of launch and landing a vehicle in a dusty environment. A second analysis, the Thermal/Micrometeoroid Protection Trade Study, was refined to determine the impacts that Reference Architecture Option 5A would have on thermal/micrometeoroid protection approaches. The third analysis, the Centaur Prelaunch Procedure Analysis, used a Centaur prelaunch test and checkout flow to identify key considerations that would be important if a Lunar Excursion Vehicle (LEV) was to use an expander cycle liquid oxygen-liquid hydrogen engine. Several 'quick look' assessments were also conducted. One quick look assessment, the Storable Propellant Quick Look Assessment, was conducted to identify design considerations that should be made if storable propellants were to be used instead of liquid oxygen and liquid hydrogen. The LEV Servicer Maintenance Analysis provided an early look at the effort required to maintain an LEV Servicer on the lunar surface. Also, support was provided to the PSS Logistics Manager to develop initial LEV Servicer cost inputs. Consideration was given to the advanced development that must be provided to accomplish a lunar and/or Mars mission. MDSS-KSC also provided support to both MASE and PSS by reviewing and commenting on architecture documents and concept definitions to ensure adequate considerations were given to the launch and landing function of an exploration initiative.

A New Method of High-Precision Positioning for an Indoor Pseudolite without Using the Known Point Initialization.

PubMed

Zhao, Yinzhi; Zhang, Peng; Guo, Jiming; Li, Xin; Wang, Jinling; Yang, Fei; Wang, Xinzhe

2018-06-20

Due to the great influence of multipath effect, noise, clock and error on pseudorange, the carrier phase double difference equation is widely used in high-precision indoor pseudolite positioning. The initial position is determined mostly by the known point initialization (KPI) method, and then the ambiguities can be fixed with the LAMBDA method. In this paper, a new method without using the KPI to achieve high-precision indoor pseudolite positioning is proposed. The initial coordinates can be quickly obtained to meet the accuracy requirement of the indoor LAMBDA method. The detailed processes of the method follows: Aiming at the low-cost single-frequency pseudolite system, the static differential pseudolite system (DPL) method is used to obtain the low-accuracy positioning coordinates of the rover station quickly. Then, the ambiguity function method (AFM) is used to search for the coordinates in the corresponding epoch. The real coordinates obtained by AFM can meet the initial accuracy requirement of the LAMBDA method, so that the double difference carrier phase ambiguities can be correctly fixed. Following the above steps, high-precision indoor pseudolite positioning can be realized. Several experiments, including static and dynamic tests, are conducted to verify the feasibility of the new method. According to the results of the experiments, the initial coordinates with the accuracy of decimeter level through the DPL can be obtained. For the AFM part, both a one-meter search scope and two-centimeter or four-centimeter search steps are used to ensure the precision at the centimeter level and high search efficiency. After dealing with the problem of multiple peaks caused by the ambiguity cosine function, the coordinate information of the maximum ambiguity function value (AFV) is taken as the initial value of the LAMBDA, and the ambiguities can be fixed quickly. The new method provides accuracies at the centimeter level for dynamic experiments and at the millimeter level for static ones.

Lunar Transportation Facilities and Operations Study, option 1

NASA Technical Reports Server (NTRS)

1991-01-01

Throughout the Option I period of the Lunar Transportation Facilities and Operations Study (LTFOS), McDonnell Douglas Space Systems Company - Kennedy Space Center (MDSSC-KSC) provided support to both the Planetary Surface Systems (PSS) Office at the National Aeronautics and Space Administration (NASA) at the Johnson Space Center and to the Flight and Ground Systems Projects Office (Payload Projects Management) at the Kennedy Space Center. The primary objective of the Option I phase of the study was to assist the above NASA centers in developing Space Exploration Initiative (SEI) concepts. MDSSC-KSC conducted three analyses which provided launch and landing detail to the proposed exploration concepts. One analysis, the Lunar Ejecta Assessment, was conducted to determine the effects of launch and landing a vehicle in a dusty environment. A second analysis, the Thermal/Micrometeoroid Protection Trade Study, was refined to determine the impacts that Reference Architecture Option 5A would have on thermal/micrometeoroid protection approaches. The third analysis, the Centaur Prelaunch Procedure Analysis, used a Centaur prelaunch test and checkout flow to identify key considerations that would be important if a Lunar Excursion Vehicle (LEV) was to use an expander cycle liquid oxygen-liquid hydrogen engine. Several 'quick look' assessments were also conducted. One quick look assessment, the Storable Propellant Quick Look Assessment, was conducted to identify design considerations that should be made if storable propellants were to be used instead of liquid oxygen and liquid hydrogen. The LEV Servicer Maintenance Analysis provided an early look at the effort required to maintain an LEV Servicer on the lunar surface. Also, support was provided to the PSS Logistics Manager to develop initial LEV Servicer cost inputs. Consideration was given to the advanced development that must be provided to accomplish a lunar and/or Mars mission. MDSS-KSC also provided support to both MASE and PSS by reviewing and commenting on architecture documents and concept definitions to ensure adequate considerations were given to the launch and landing function of an exploration initiative.

When public health intervention is not successful: Cost sharing, crowd-out, and selection in Korea's National Cancer Screening Program.

PubMed

Kim, Hyuncheol Bryant; Lee, Sun-Mi

2017-05-01

This study investigates the impact of and behavioral responses to cost sharing in Korea's National Cancer Screening Program, which provides free stomach and breast cancer screenings to those with an income below a certain cutoff. Free cancer screening substantially increases the screening take up rate, yielding more cancer detections. However, the increase in cancer detection is quickly crowded out by cancer detection through other channels such as diagnostic testing and private cancer screening. Further, compliers are much less likely to have cancer than never takers. Crowd-out and selection help explain why the program has been unable to reduce cancer mortality. Copyright © 2017 Elsevier B.V. All rights reserved.

Computational Simulations and the Scientific Method

NASA Technical Reports Server (NTRS)

Kleb, Bil; Wood, Bill

2005-01-01

As scientific simulation software becomes more complicated, the scientific-software implementor's need for component tests from new model developers becomes more crucial. The community's ability to follow the basic premise of the Scientific Method requires independently repeatable experiments, and model innovators are in the best position to create these test fixtures. Scientific software developers also need to quickly judge the value of the new model, i.e., its cost-to-benefit ratio in terms of gains provided by the new model and implementation risks such as cost, time, and quality. This paper asks two questions. The first is whether other scientific software developers would find published component tests useful, and the second is whether model innovators think publishing test fixtures is a feasible approach.

Image compression using quad-tree coding with morphological dilation

NASA Astrophysics Data System (ADS)

Wu, Jiaji; Jiang, Weiwei; Jiao, Licheng; Wang, Lei

2007-11-01

In this paper, we propose a new algorithm which integrates morphological dilation operation to quad-tree coding, the purpose of doing this is to compensate each other's drawback by using quad-tree coding and morphological dilation operation respectively. New algorithm can not only quickly find the seed significant coefficient of dilation but also break the limit of block boundary of quad-tree coding. We also make a full use of both within-subband and cross-subband correlation to avoid the expensive cost of representing insignificant coefficients. Experimental results show that our algorithm outperforms SPECK and SPIHT. Without using any arithmetic coding, our algorithm can achieve good performance with low computational cost and it's more suitable to mobile devices or scenarios with a strict real-time requirement.

Battery energy storage sizing when time of use pricing is applied.

PubMed

Carpinelli, Guido; Khormali, Shahab; Mottola, Fabio; Proto, Daniela

2014-01-01

Battery energy storage systems (BESSs) are considered a key device to be introduced to actuate the smart grid paradigm. However, the most critical aspect related to the use of such device is its economic feasibility as it is a still developing technology characterized by high costs and limited life duration. Particularly, the sizing of BESSs must be performed in an optimized way in order to maximize the benefits related to their use. This paper presents a simple and quick closed form procedure for the sizing of BESSs in residential and industrial applications when time-of-use tariff schemes are applied. A sensitivity analysis is also performed to consider different perspectives in terms of life span and future costs.

Achieving the Space Vision through Government Incentives and Rapid Prototyping

NASA Astrophysics Data System (ADS)

Gump, David P.

2005-02-01

The Crew Exploration Vehicle family must be developed and operated at much lower cost levels than current vehicles in order to win public support, while providing a higher level of safety. The Transformational Space Corporation (t/Space) is under contract to NASA show how this can be accomplished through government incentives for the development of privately-owned infrastructure that sells services to both government and commercial space customers. This markets-based approach rewards companies that focus on delivering affordable products quickly, rather than on following elaborate government-supervised processes. The architecture developed by t/Space also eliminates the need to develop heavy-lift vehicles and lunar landers, cutting in half NASA's projected cost for the first human return to the Moon.

Battery Energy Storage Sizing When Time of Use Pricing Is Applied

PubMed Central

Khormali, Shahab

2014-01-01

Battery energy storage systems (BESSs) are considered a key device to be introduced to actuate the smart grid paradigm. However, the most critical aspect related to the use of such device is its economic feasibility as it is a still developing technology characterized by high costs and limited life duration. Particularly, the sizing of BESSs must be performed in an optimized way in order to maximize the benefits related to their use. This paper presents a simple and quick closed form procedure for the sizing of BESSs in residential and industrial applications when time-of-use tariff schemes are applied. A sensitivity analysis is also performed to consider different perspectives in terms of life span and future costs. PMID:25295309

Radiotherapy Monte Carlo simulation using cloud computing technology.

PubMed

Poole, C M; Cornelius, I; Trapp, J V; Langton, C M

2012-12-01

Cloud computing allows for vast computational resources to be leveraged quickly and easily in bursts as and when required. Here we describe a technique that allows for Monte Carlo radiotherapy dose calculations to be performed using GEANT4 and executed in the cloud, with relative simulation cost and completion time evaluated as a function of machine count. As expected, simulation completion time decreases as 1/n for n parallel machines, and relative simulation cost is found to be optimal where n is a factor of the total simulation time in hours. Using the technique, we demonstrate the potential usefulness of cloud computing as a solution for rapid Monte Carlo simulation for radiotherapy dose calculation without the need for dedicated local computer hardware as a proof of principal.

Inducing Sadness and Anxiousness through Visual Media: Measurement Techniques and Persistence

PubMed Central

Kuijsters, Andre; Redi, Judith; de Ruyter, Boris; Heynderickx, Ingrid

2016-01-01

The persistence of negative moods (sadness and anxiousness) induced by three visual Mood Induction Procedures (MIP) was investigated. The evolution of the mood after the MIP was monitored for a period of 8 min with the Self-Assessment Manikin (SAM; every 2 min) and with recordings of skin conductance level (SCL) and electrocardiography (ECG). The SAM pleasure ratings showed that short and longer film fragments were effective in inducing a longer lasting negative mood, whereas the negative mood induced by the IAPS slideshow was short lived. The induced arousal during the anxious MIPs diminished quickly after the mood induction; nevertheless, the SCL data suggest longer lasting arousal effects for both movies. The decay of the induced mood follows a logarithmic function; diminishing quickly in the first minutes, thereafter returning slowly back to baseline. These results reveal that caution is needed when investigating the effects of the induced mood on a task or the effect of interventions on induced moods, because the induced mood diminishes quickly after the mood induction. PMID:27536260

Practice-based evidence study design for comparative effectiveness research.

PubMed

Horn, Susan D; Gassaway, Julie

2007-10-01

To describe a new, rigorous, comprehensive practice-based evidence for clinical practice improvement (PBE-CPI) study methodology, and compare its features, advantages, and disadvantages to those of randomized controlled trials and sophisticated statistical methods for comparative effectiveness research. PBE-CPI incorporates natural variation within data from routine clinical practice to determine what works, for whom, when, and at what cost. It uses the knowledge of front-line caregivers, who develop study questions and define variables as part of a transdisciplinary team. Its comprehensive measurement framework provides a basis for analyses of significant bivariate and multivariate associations between treatments and outcomes, controlling for patient differences, such as severity of illness. PBE-CPI studies can uncover better practices more quickly than randomized controlled trials or sophisticated statistical methods, while achieving many of the same advantages. We present examples of actionable findings from PBE-CPI studies in postacute care settings related to comparative effectiveness of medications, nutritional support approaches, incontinence products, physical therapy activities, and other services. Outcomes improved when practices associated with better outcomes in PBE-CPI analyses were adopted in practice.

Drugs, sex, money and power: an HPV vaccine case study.

PubMed

Haas, Marion; Ashton, Toni; Blum, Kerstin; Christiansen, Terkel; Conis, Elena; Crivelli, Luca; Lim, Meng Kin; Lisac, Melanie; Macadam, Margaret; Schlette, Sophia

2009-10-01

In this paper we compare the experiences of seven industrialized countries in considering approval and introduction of the world's first cervical cancer-preventing vaccine. Based on case studies, articles from public agencies, professional journals and newspapers we analyse the public debate about the vaccine, examine positions of stakeholder groups and their influence on the course and outcome of this policy process. The analysis shows that the countries considered here approved the vaccine and established related immunization programs exceptionally quickly even though there still exist many uncertainties as to the vaccine's long-term effectiveness, cost-effectiveness and safety. Some countries even bypassed established decision-making processes. The voice of special interest groups has been prominent in all countries, drawing on societal values and fears of the public. Even though positions differed among countries, all seven decided to publicly fund the vaccine, illustrating a widespread convergence of interests. It is important that decision-makers adhere to transparent and robust guidelines in making funding decisions in the future to avoid capture by vested interests and potentially negative effects on access and equity.

Identifying Links Between Sexual Violence and Youth Violence Perpetration: New Opportunities for Sexual Violence Prevention

PubMed Central

DeGue, Sarah; Massetti, Greta M.; Holt, Melissa K.; Tharp, Andra Teten; Valle, Linda Anne; Matjasko, Jennifer L.; Lippy, Caroline

2018-01-01

Objective One promising opportunity for advancing sexual violence (SV) research and identifying new avenues for prevention involves examining other forms of violence that may share risk factors with SV. Youth violence (YV) is ideal for consideration given evidence of overlap in SV and YV risk factors, a large set of established YV risk factors across the social ecology, and the number of evidence-based YV prevention strategies available. The current paper identifies shared and unique risk factors for SV and YV and highlights evidence-based YV prevention strategies that impact these shared risk factors. Conclusions Researchers and program developers should consider adapting and evaluating evidence-based YV prevention strategies to prevent SV. Modifying these programs to address SV’s unique risk factors may maximize their potential effectiveness. In addition, expanding SV research at the outer levels of the social ecology is critical to developing community-level prevention strategies. The YV literature suggests several potential risk factors at these levels in need of research for SV, including school connectedness, social disorganization, and availability of alcohol and drugs. Using the YV literature as a starting point for expanding SV research leverages prior investments in YV research, may help identify new SV prevention strategies at a limited cost, and moves the field more quickly toward implementation of cost-effective, multidomain violence prevention strategies in communities. PMID:29644117

Clinical effectiveness and cost-effectiveness of foam sclerotherapy, endovenous laser ablation and surgery for varicose veins: results from the Comparison of LAser, Surgery and foam Sclerotherapy (CLASS) randomised controlled trial.

PubMed

Brittenden, Julie; Cotton, Seonaidh C; Elders, Andrew; Tassie, Emma; Scotland, Graham; Ramsay, Craig R; Norrie, John; Burr, Jennifer; Francis, Jill; Wileman, Samantha; Campbell, Bruce; Bachoo, Paul; Chetter, Ian; Gough, Michael; Earnshaw, Jonothan; Lees, Tim; Scott, Julian; Baker, Sara A; MacLennan, Graeme; Prior, Maria; Bolsover, Denise; Campbell, Marion K

2015-04-01

Foam sclerotherapy (foam) and endovenous laser ablation (EVLA) have emerged as alternative treatments to surgery for patients with varicose veins, but uncertainty exists regarding their effectiveness in the medium to longer term. To assess the clinical effectiveness and cost-effectiveness of foam, EVLA and surgery for the treatment of varicose veins. A parallel-group randomised controlled trial (RCT) without blinding, and economic modelling evaluation. Eleven UK specialist vascular centres. Seven hundred and ninety-eight patients with primary varicose veins (foam, n = 292; surgery, n = 294; EVLA, n = 212). Patients were randomised between all three treatment options (eight centres) or between foam and surgery (three centres). Disease-specific [Aberdeen Varicose Vein Questionnaire (AVVQ)] and generic [European Quality of Life-5 Dimensions (EQ-5D), Short Form questionnaire-36 items (SF-36) physical and mental component scores] quality of life (QoL) at 6 months. Cost-effectiveness as cost per quality-adjusted life-year (QALY) gained. Quality of life at 6 weeks; residual varicose veins; Venous Clinical Severity Score (VCSS); complication rates; return to normal activity; truncal vein ablation rates; and costs. The results appear generalisable in that participants' baseline characteristics (apart from a lower-than-expected proportion of females) and post-treatment improvement in outcomes were comparable with those in other RCTs. The health gain achieved in the AVVQ with foam was significantly lower than with surgery at 6 months [effect size -1.74, 95% confidence interval (CI) -2.97 to -0.50; p = 0.006], but was similar to that achieved with EVLA. The health gain in SF-36 mental component score for foam was worse than that for EVLA (effect size 1.54, 95% CI 0.01 to 3.06; p = 0.048) but similar to that for surgery. There were no differences in EQ-5D or SF-36 component scores in the surgery versus foam or surgery versus EVLA comparisons at 6 months. The trial-based cost-effectiveness analysis showed that, at 6 months, foam had the highest probability of being considered cost-effective at a ceiling willingness-to-pay ratio of £20,000 per QALY. EVLA was found to cost £26,107 per QALY gained versus foam, and was less costly and generated slightly more QALYs than surgery. Markov modelling using trial costs and the limited recurrence data available suggested that, at 5 years, EVLA had the highest probability (≈ 79%) of being cost-effective at conventional thresholds, followed by foam (≈ 17%) and surgery (≈ 5%). With regard to secondary outcomes, health gains at 6 weeks (p < 0.005) were greater for EVLA than for foam (EQ-5D, p = 0.004). There were fewer procedural complications in the EVLA group (1%) than after foam (7%) and surgery (8%) (p < 0.001). Participants returned to a wide range of behaviours more quickly following foam or EVLA than following surgery (p < 0.05). There were no differences in VCSS between the three treatments. Truncal ablation rates were higher for surgery (p < 0.001) and EVLA (p < 0.001) than for foam, and were similar for surgery and EVLA. Considerations of both the 6-month clinical outcomes and the estimated 5-year cost-effectiveness suggest that EVLA should be considered as the treatment of choice for suitable patients. Five-year trial results are currently being evaluated to compare the cost-effectiveness of foam, surgery and EVLA, and to determine the recurrence rates following each treatment. This trial has highlighted the need for long-term outcome data from RCTs on QoL, recurrence rates and costs for foam sclerotherapy and other endovenous techniques compared against each other and against surgery. Current Controlled Trials ISRCTN51995477. This project was funded by the National Institute for Health Research (NIHR) Health Technology Assessment programme and will be published in full in Health Technology Assessment; Vol. 19, No. 27. See the NIHR Journals Library website for further project information.

Clinical effectiveness and cost-effectiveness of foam sclerotherapy, endovenous laser ablation and surgery for varicose veins: results from the Comparison of LAser, Surgery and foam Sclerotherapy (CLASS) randomised controlled trial.

PubMed Central

Brittenden, Julie; Cotton, Seonaidh C; Elders, Andrew; Tassie, Emma; Scotland, Graham; Ramsay, Craig R; Norrie, John; Burr, Jennifer; Francis, Jill; Wileman, Samantha; Campbell, Bruce; Bachoo, Paul; Chetter, Ian; Gough, Michael; Earnshaw, Jonothan; Lees, Tim; Scott, Julian; Baker, Sara A; MacLennan, Graeme; Prior, Maria; Bolsover, Denise; Campbell, Marion K

2015-01-01

BACKGROUND Foam sclerotherapy (foam) and endovenous laser ablation (EVLA) have emerged as alternative treatments to surgery for patients with varicose veins, but uncertainty exists regarding their effectiveness in the medium to longer term. OBJECTIVES To assess the clinical effectiveness and cost-effectiveness of foam, EVLA and surgery for the treatment of varicose veins. DESIGN A parallel-group randomised controlled trial (RCT) without blinding, and economic modelling evaluation. SETTING Eleven UK specialist vascular centres. PARTICIPANTS Seven hundred and ninety-eight patients with primary varicose veins (foam, n = 292; surgery, n = 294; EVLA, n = 212). INTERVENTIONS Patients were randomised between all three treatment options (eight centres) or between foam and surgery (three centres). PRIMARY OUTCOME MEASURES Disease-specific [Aberdeen Varicose Vein Questionnaire (AVVQ)] and generic [European Quality of Life-5 Dimensions (EQ-5D), Short Form questionnaire-36 items (SF-36) physical and mental component scores] quality of life (QoL) at 6 months. Cost-effectiveness as cost per quality-adjusted life-year (QALY) gained. SECONDARY OUTCOME MEASURES Quality of life at 6 weeks; residual varicose veins; Venous Clinical Severity Score (VCSS); complication rates; return to normal activity; truncal vein ablation rates; and costs. RESULTS The results appear generalisable in that participants' baseline characteristics (apart from a lower-than-expected proportion of females) and post-treatment improvement in outcomes were comparable with those in other RCTs. The health gain achieved in the AVVQ with foam was significantly lower than with surgery at 6 months [effect size -1.74, 95% confidence interval (CI) -2.97 to -0.50; p = 0.006], but was similar to that achieved with EVLA. The health gain in SF-36 mental component score for foam was worse than that for EVLA (effect size 1.54, 95% CI 0.01 to 3.06; p = 0.048) but similar to that for surgery. There were no differences in EQ-5D or SF-36 component scores in the surgery versus foam or surgery versus EVLA comparisons at 6 months. The trial-based cost-effectiveness analysis showed that, at 6 months, foam had the highest probability of being considered cost-effective at a ceiling willingness-to-pay ratio of £20,000 per QALY. EVLA was found to cost £26,107 per QALY gained versus foam, and was less costly and generated slightly more QALYs than surgery. Markov modelling using trial costs and the limited recurrence data available suggested that, at 5 years, EVLA had the highest probability (≈ 79%) of being cost-effective at conventional thresholds, followed by foam (≈ 17%) and surgery (≈ 5%). With regard to secondary outcomes, health gains at 6 weeks (p < 0.005) were greater for EVLA than for foam (EQ-5D, p = 0.004). There were fewer procedural complications in the EVLA group (1%) than after foam (7%) and surgery (8%) (p < 0.001). Participants returned to a wide range of behaviours more quickly following foam or EVLA than following surgery (p < 0.05). There were no differences in VCSS between the three treatments. Truncal ablation rates were higher for surgery (p < 0.001) and EVLA (p < 0.001) than for foam, and were similar for surgery and EVLA. CONCLUSIONS Considerations of both the 6-month clinical outcomes and the estimated 5-year cost-effectiveness suggest that EVLA should be considered as the treatment of choice for suitable patients. FUTURE WORK Five-year trial results are currently being evaluated to compare the cost-effectiveness of foam, surgery and EVLA, and to determine the recurrence rates following each treatment. This trial has highlighted the need for long-term outcome data from RCTs on QoL, recurrence rates and costs for foam sclerotherapy and other endovenous techniques compared against each other and against surgery. TRIAL REGISTRATION Current Controlled Trials ISRCTN51995477. FUNDING This project was funded by the National Institute for Health Research (NIHR) Health Technology Assessment programme and will be published in full in Health Technology Assessment; Vol. 19, No. 27. See the NIHR Journals Library website for further project information. PMID:25858333

The Psychologist Said Quickly, “Dialogue Descriptions Modulate Reading Speed!”

PubMed Central

Stites, Mallory C.; Luke, Steven G.; Christianson, Kiel

2012-01-01

The current study investigates whether the semantic content of a dialogue description can affect reading times on an embedded quote to determine if the speed at which a character is described as saying a quote influences how quickly it is read. Yao and Scheepers (2011) previously found that readers were faster to read direct quotes when the preceding context implied that the talker generally spoke quickly, an effect attributed to perceptual simulation of talker speed. The current study manipulated the speed of a physical action performed by the speaker independently from character talking rate to determine if these sources have separable effects on perceptual simulation of a direct quote. Results showed that readers spent less time reading direct quotes described as being said quickly compared to slowly (e.g., John walked/bolted into the room and said energetically/nonchalantly, “I finally found my car keys”), an effect that was not present when a nearly identical phrase was presented as an indirect quote (e.g., John…said energetically that he finally found his car keys). The speed of the character’s movement did not affect direct quote reading times. Furthermore, fast adverbs were themselves read significantly faster than slow adverbs, an effect we attribute to implicit effects on the eye movement program stemming from automatically activated semantic features of the adverbs. Our findings add to the literature on perceptual simulation by showing that these effects can be instantiated with only a single adverb, and are strong enough to override effects of global sentence speed. PMID:22927027

Applying Project Management Strategies in a Large Curriculum Conversion Project in Higher Education

ERIC Educational Resources Information Center

Gardner, Joel; Bennett, Patrick A.; Hyatt, Niccole; Stoker, Kevin

2017-01-01

Higher education is undergoing great changes that require universities to adapt quickly, and making these changes can be difficult. One discipline that can aid in executing change is project management, which has developed a set of clear processes and strategies for completing initiatives quickly and effectively. Several authors have identified…

Connector acts as quick coupling in coaxial cable application

NASA Technical Reports Server (NTRS)

Brejcha, A. G., Jr.

1966-01-01

Quick-coupling connector whose inner shells are threaded to the cable ends and whose outer shells have tracks that register in channels machined in the inner shells are rotated 45 deg to effect a locking of the coupling. This connector faithfully reproduces excellent electrical characteristics no matter how frequently assembled and disassembled.

Comparison of experimental methods for estimating matrix diffusion coefficients for contaminant transport modeling

NASA Astrophysics Data System (ADS)

Telfeyan, Katherine; Ware, S. Doug; Reimus, Paul W.; Birdsell, Kay H.

2018-02-01

Diffusion cell and diffusion wafer experiments were conducted to compare methods for estimating effective matrix diffusion coefficients in rock core samples from Pahute Mesa at the Nevada Nuclear Security Site (NNSS). A diffusion wafer method, in which a solute diffuses out of a rock matrix that is pre-saturated with water containing the solute, is presented as a simpler alternative to the traditional through-diffusion (diffusion cell) method. Both methods yielded estimates of effective matrix diffusion coefficients that were within the range of values previously reported for NNSS volcanic rocks. The difference between the estimates of the two methods ranged from 14 to 30%, and there was no systematic high or low bias of one method relative to the other. From a transport modeling perspective, these differences are relatively minor when one considers that other variables (e.g., fracture apertures, fracture spacings) influence matrix diffusion to a greater degree and tend to have greater uncertainty than effective matrix diffusion coefficients. For the same relative random errors in concentration measurements, the diffusion cell method yields effective matrix diffusion coefficient estimates that have less uncertainty than the wafer method. However, the wafer method is easier and less costly to implement and yields estimates more quickly, thus allowing a greater number of samples to be analyzed for the same cost and time. Given the relatively good agreement between the methods, and the lack of any apparent bias between the methods, the diffusion wafer method appears to offer advantages over the diffusion cell method if better statistical representation of a given set of rock samples is desired.

Comparison of Quick-Set and mineral trioxide aggregate root-end fillings for the regeneration of apical tissues in dogs.

PubMed

Kohout, George D; He, Jianing; Primus, Carolyn M; Opperman, Lynne A; Woodmansey, Karl F

2015-02-01

Quick-Set (Avalon Biomed Inc, Bradenton, FL) is a calcium aluminosilicate cement that is a potential alternative to mineral trioxide aggregate (MTA) with greater acid resistance and faster setting. The purpose of this study was to compare the regeneration of apical tissues after root-end surgery when the apical tissues were exposed to Quick-Set or White ProRoot MTA (Dentsply Tulsa Dental Specialties, Tulsa, OK) by root-end resection. The root canals of 42 mandibular premolars in 7 beagle dogs were accessed, cleaned and shaped, and obturated with Quick-Set or white MTA. Osteotomies and root-end resections were performed immediately. The dogs were sacrificed at 90 days, and the teeth and surrounding tissues were removed and prepared for histologic analysis. The sections of the apical areas were scored for inflammation, new cementum formation, periodontal ligament formation, and bone quality. At 90 days, both materials supported some degree of cementum formation on the surface of the material, periodontal ligament regeneration, and excellent bone quality. The only significant difference was greater inflammation found in the Quick-Set group. Quick-Set and White ProRoot MTA had a similar effect on bone quality, cementum formation, and periodontal ligament formation after root-end surgery in dogs. Quick-Set was associated with greater inflammation. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Can developing countries leapfrog the centralized electrification paradigm?

DOE PAGES

Levin, Todd; Thomas, Valerie M.

2016-02-04

Due to the rapidly decreasing costs of small renewable electricity generation systems, centralized power systems are no longer a necessary condition of universal access to modern energy services. Developing countries, where centralized electricity infrastructures are less developed, may be able to adopt these new technologies more quickly. We first review the costs of grid extension and distributed solar home systems (SHSs) as reported by a number of different studies. We then present a general analytic framework for analyzing the choice between extending the grid and implementing distributed solar home systems. Drawing upon reported grid expansion cost data for three specificmore » regions, we demonstrate this framework by determining the electricity consumption levels at which the costs of provision through centralized and decentralized approaches are equivalent in these regions. We then calculate SHS capital costs that are necessary for these technologies provide each of five tiers of energy access, as defined by the United Nations Sustainable Energy for All initiative. Our results suggest that solar home systems can play an important role in achieving universal access to basic energy services. The extent of this role depends on three primary factors: SHS costs, grid expansion costs, and centralized generation costs. Given current technology costs, centralized systems will still be required to enable higher levels of consumption; however, cost reduction trends have the potential to disrupt this paradigm. Furthermore, by looking ahead rather than replicating older infrastructure styles, developing countries can leapfrog to a more distributed electricity service model.« less

Assessment of IRI-2012, NeQuick-2 and IRI-Plas 2015 models with observed equatorial ionization anomaly in Africa during 2009 sudden stratospheric warming event

NASA Astrophysics Data System (ADS)

Bolaji, O. S.; Oyeyemi, E. O.; Adewale, A. O.; Wu, Q.; Okoh, D.; Doherty, P. H.; Kaka, R. O.; Abbas, M.; Owolabi, C.; Jidele, P. A.

2017-11-01

In Africa, we assessed the performance of all the three options of International Reference Ionosphere 2012, IRI-2012 (i.e. IRI-2001, IRI-2001COR and IRI-NeQuick), NeQuick-2 and IRI-Plas 2015 models prior to and during 2009 sudden stratospheric warming (SSW) event to predict equatorial ionization anomaly (EIA) crest locations and their magnitudes using total electron content (TEC) from experimental records of Global Positioning System (GPS). We confirmed that the IRI-Plas 2015 that appeared as the best compared to all of the models as regard prediction of the EIA crest locations in the northern hemisphere of Africa is due to discontinuities in the GPS data between ∼8° N and 22° N. As regard the predictions of EIA crest magnitudes and the location of EIA crests in the southern hemisphere of Africa, they are not present in all the models. The NeQuick-2 model does not have the capability to predict either the EIA crest location in the northern or southern hemisphere. The SSW effect on the low latitude was able to modify a single EIA crest to pre-noon and post noon EIA crests in the northern hemisphere during the SSW peak phase and significantly reduced the GPS TEC magnitudes over the hemispheres as well. These SSW effects and delays of plasma transportation to higher latitudes in GPS TEC were absent in all the models. For future improvements of IRI-2012, NeQuick-2 and IRI-Plas 2015 models, SSW conditions should be included in order to characterize the effect of lower atmosphere on the ionosphere. The EIA trough modeling is only present in IRI-2001COR and IRI-2001NeQuick options. In the middle latitude, all the model could not predict the location of highest TEC magnitudes found at RBAY (Richardsbay, South Africa).

Development and Application of Loop-Mediated Isothermal Amplification Assays for Rapid Visual Detection of cry2Ab and cry3A Genes in Genetically-Modified Crops

PubMed Central

Li, Feiwu; Yan, Wei; Long, Likun; Qi, Xing; Li, Congcong; Zhang, Shihong

2014-01-01

The cry2Ab and cry3A genes are two of the most important insect-resistant exogenous genes and had been widely used in genetically-modified crops. To develop more effective alternatives for the quick identification of genetically-modified organisms (GMOs) containing these genes, a rapid and visual loop-mediated isothermal amplification (LAMP) method to detect the cry2Ab and cry3A genes is described in this study. The LAMP assay can be finished within 60 min at an isothermal condition of 63 °C. The derived LAMP products can be obtained by a real-time turbidimeter via monitoring the white turbidity or directly observed by the naked eye through adding SYBR Green I dye. The specificity of the LAMP assay was determined by analyzing thirteen insect-resistant genetically-modified (GM) crop events with different Bt genes. Furthermore, the sensitivity of the LAMP assay was evaluated by diluting the template genomic DNA. Results showed that the limit of detection of the established LAMP assays was approximately five copies of haploid genomic DNA, about five-fold greater than that of conventional PCR assays. All of the results indicated that this established rapid and visual LAMP assay was quick, accurate and cost effective, with high specificity and sensitivity. In addition, this method does not need specific expensive instruments or facilities, which can provide a simpler and quicker approach to detecting the cry2Ab and cry3A genes in GM crops, especially for on-site, large-scale test purposes in the field. PMID:25167136

Development and application of loop-mediated isothermal amplification assays for rapid visual detection of cry2Ab and cry3A genes in genetically-modified crops.

PubMed

Li, Feiwu; Yan, Wei; Long, Likun; Qi, Xing; Li, Congcong; Zhang, Shihong

2014-08-27

The cry2Ab and cry3A genes are two of the most important insect-resistant exogenous genes and had been widely used in genetically-modified crops. To develop more effective alternatives for the quick identification of genetically-modified organisms (GMOs) containing these genes, a rapid and visual loop-mediated isothermal amplification (LAMP) method to detect the cry2Ab and cry3A genes is described in this study. The LAMP assay can be finished within 60 min at an isothermal condition of 63 °C. The derived LAMP products can be obtained by a real-time turbidimeter via monitoring the white turbidity or directly observed by the naked eye through adding SYBR Green I dye. The specificity of the LAMP assay was determined by analyzing thirteen insect-resistant genetically-modified (GM) crop events with different Bt genes. Furthermore, the sensitivity of the LAMP assay was evaluated by diluting the template genomic DNA. Results showed that the limit of detection of the established LAMP assays was approximately five copies of haploid genomic DNA, about five-fold greater than that of conventional PCR assays. All of the results indicated that this established rapid and visual LAMP assay was quick, accurate and cost effective, with high specificity and sensitivity. In addition, this method does not need specific expensive instruments or facilities, which can provide a simpler and quicker approach to detecting the cry2Ab and cry3A genes in GM crops, especially for on-site, large-scale test purposes in the field.

Comparison of accelerated solvent extraction and quick, easy, cheap, effective, rugged and safe method for extraction and determination of pharmaceuticals in vegetables.

PubMed

Chuang, Ya-Hui; Zhang, Yingjie; Zhang, Wei; Boyd, Stephen A; Li, Hui

2015-07-24

Land application of biosolids and irrigation with reclaimed water in agricultural production could result in accumulation of pharmaceuticals in vegetable produce. To better assess the potential human health impact from long-term consumption of pharmaceutical-contaminated vegetables, it is important to accurately quantify the amount of pharmaceuticals accumulated in vegetables. In this study, a quick, easy, cheap, effective, rugged and safe (QuEChERS) method was developed and optimized to extract multiple classes of pharmaceuticals from vegetables, which were subsequently quantified by liquid chromatography coupled to tandem mass spectrometry. For the eleven target pharmaceuticals in celery and lettuce, the extraction recovery of the QuEChERS method ranged from 70.1 to 118.6% with relative standard deviation <20%, and the method detection limit was achieved at the levels of nanograms of pharmaceuticals per gram of vegetables. The results revealed that the performance of the QuEChERS method was comparable to, or better than that of accelerated solvent extraction (ASE) method for extraction of pharmaceuticals from plants. The two optimized extraction methods were applied to quantify the uptake of pharmaceuticals by celery and lettuce growing hydroponically. The results showed that all the eleven target pharmaceuticals could be absorbed by the vegetables from water. Compared to the ASE method, the QuEChERS method offers the advantages of short time and reduced costs of sample preparation, and less amount of organic solvents used. The established QuEChERS method could be used to determine the accumulation of multiple classes of pharmaceutical residues in vegetables and other plants, which is needed to evaluate the quality and safety of agricultural produce consumed by humans. Copyright © 2015 Elsevier B.V. All rights reserved.

Raman spectroscopy of stored red blood cells: evaluating clinically-relevant biochemical markers in donated blood

NASA Astrophysics Data System (ADS)

Atkins, Chad G.; Buckley, Kevin; Chen, Deborah; Schulze, H. G.; Devine, Dana V.; Blades, Michael W.; Turner, Robin F. B.

2015-07-01

Modern transfusion medicine relies on the safe, secure, and cost-effective delivery of donated red blood cells (RBCs). Once isolated, RBCs are suspended in a defined additive solution and stored in plastic blood bags in which, over time, they undergo chemical, physiological, and morphological changes that may have a deleterious impact on some patients. Regulations limit the storage period to 42 days and the cells do not routinely undergo analytical testing before use. In this study, we use Raman spectroscopy to interrogate stored RBCs and we identify metabolic and cell-breakdown products, such as haemoglobin and membrane fragments, that build-up in the blood bags as the cells age. Our work points the way to the development of an instrument which could quickly and easily assess the biochemical nature of stored RBC units before they are transfused.

The hematoma block: a simple, effective technique for closed reduction of ankle fracture dislocations.

PubMed

Ross, Adrianne; Catanzariti, Alan R; Mendicino, Robert W

2011-01-01

Management of a dislocated ankle fracture can be challenging because of instability of the ankle mortise, a compromised soft tissue envelope, and the potential neurovascular compromise. Every effort should be made to quickly and efficiently relocate the disrupted ankle joint. Within the emergency department setting, narcotics and benzodiazepines can be used to sedate the patient before attempting closed reduction. The combination of narcotics and benzodiazepines provides relief of pain and muscle guarding; however, it conveys a risk of seizure as well as respiratory arrest. An alternative to conscious sedation is the hematoma block, or an intra-articular local anesthetic injection in the ankle joint and the associated fracture hematoma. The hematoma block offers a comparable amount of analgesia to conscious sedation without the additional cardiovascular risk, hospital cost, and procedure time. Copyright © 2011 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Yu; Li, Shunbo; Wen, Weijia, E-mail: phwen@ust.hk

A local area temperature monitor is important for precise control of chemical and biological processes in microfluidics. In this work, we developed a facile method to realize micron spatial resolution of temperature mapping in a microfluidic channel quickly and cost effectively. Based on the temperature dependent fluorescence emission of NaYF{sub 4}:Yb{sup 3+}, Er{sup 3+} upconversion nanoparticles (UCNPs) under near-infrared irradiation, ratio-metric imaging of UCNPs doped polydimethylsiloxane can map detailed temperature distribution in the channel. Unlike some reported strategies that utilize temperature sensitive organic dye (such as Rhodamine) to achieve thermal sensing, our method is highly chemically inert and physically stablemore » without any performance degradation in long term operation. Moreover, this method can be easily scaled up or down, since the spatial and temperature resolution is determined by an optical imaging system. Our method supplied a simple and efficient solution for temperature mapping on a heterogeneous surface where usage of an infrared thermal camera was limited.« less

Quantitative modeling of coupled piezo-elastodynamic behavior of piezoelectric actuators bonded to an elastic medium for structural health monitoring: a review.

PubMed

Huang, Guoliang; Song, Fei; Wang, Xiaodong

2010-01-01

Elastic waves, especially guided waves, generated by a piezoelectric actuator/sensor network, have shown great potential for on-line health monitoring of advanced aerospace, nuclear, and automotive structures in recent decades. Piezoelectric materials can function as both actuators and sensors in these applications due to wide bandwidth, quick response and low costs. One of the most fundamental issues surrounding the effective use of piezoelectric actuators is the quantitative evaluation of the resulting elastic wave propagation by considering the coupled piezo-elastodynamic behavior between the actuator and the host medium. Accurate characterization of the local interfacial stress distribution between the actuator and the host medium is the key issue for the problem. This paper presents a review of the development of analytical, numerical and hybrid approaches for modeling of the coupled piezo-elastodynamic behavior. The resulting elastic wave propagation for structural health monitoring is also summarized.

Lot quality assurance sampling for monitoring immunization programmes: cost-efficient or quick and dirty?

PubMed

Sandiford, P

1993-09-01

In recent years Lot quality assurance sampling (LQAS), a method derived from production-line industry, has been advocated as an efficient means to evaluate the coverage rates achieved by child immunization programmes. This paper examines the assumptions on which LQAS is based and the effect that these assumptions have on its utility as a management tool. It shows that the attractively low sample sizes used in LQAS are achieved at the expense of specificity unless unrealistic assumptions are made about the distribution of coverage rates amongst the immunization programmes to which the method is applied. Although it is a very sensitive test and its negative predictive value is probably high in most settings, its specificity and positive predictive value are likely to be low. The implications of these strengths and weaknesses with regard to management decision-making are discussed.

National health spending projections through 2020: economic recovery and reform drive faster spending growth.

PubMed

Keehan, Sean P; Sisko, Andrea M; Truffer, Christopher J; Poisal, John A; Cuckler, Gigi A; Madison, Andrew J; Lizonitz, Joseph M; Smith, Sheila D

2011-08-01

In 2010, US health spending is estimated to have grown at a historic low of 3.9 percent, due in part to the effects of the recently ended recession. In 2014, national health spending growth is expected to reach 8.3 percent when major coverage expansions from the Affordable Care Act of 2010 begin. The expanded Medicaid and private insurance coverage are expected to increase demand for health care significantly, particularly for prescription drugs and physician and clinical services. Robust growth in Medicare enrollment, expanded Medicaid coverage, and premium and cost-sharing subsidies for exchange plans are projected to increase the federal government share of health spending from 27 percent in 2009 to 31 percent by 2020. This article provides perspective on how the nation's health care dollar will be spent over the coming decade as the health sector moves quickly toward its new paradigm of expanded insurance coverage.

Microcontroller-based real-time QRS detection.

PubMed

Sun, Y; Suppappola, S; Wrublewski, T A

1992-01-01

The authors describe the design of a system for real-time detection of QRS complexes in the electrocardiogram based on a single-chip microcontroller (Motorola 68HC811). A systematic analysis of the instrumentation requirements for QRS detection and of the various design techniques is also given. Detection algorithms using different nonlinear transforms for the enhancement of QRS complexes are evaluated by using the ECG database of the American Heart Association. The results show that the nonlinear transform involving multiplication of three adjacent, sign-consistent differences in the time domain gives a good performance and a quick response. When implemented with an appropriate sampling rate, this algorithm is also capable of rejecting pacemaker spikes. The eight-bit single-chip microcontroller provides sufficient throughput and shows a satisfactory performance. Implementation of multiple detection algorithms in the same system improves flexibility and reliability. The low chip count in the design also favors maintainability and cost-effectiveness.

Computational Issues in Damping Identification for Large Scale Problems

NASA Technical Reports Server (NTRS)

Pilkey, Deborah L.; Roe, Kevin P.; Inman, Daniel J.

1997-01-01

Two damping identification methods are tested for efficiency in large-scale applications. One is an iterative routine, and the other a least squares method. Numerical simulations have been performed on multiple degree-of-freedom models to test the effectiveness of the algorithm and the usefulness of parallel computation for the problems. High Performance Fortran is used to parallelize the algorithm. Tests were performed using the IBM-SP2 at NASA Ames Research Center. The least squares method tested incurs high communication costs, which reduces the benefit of high performance computing. This method's memory requirement grows at a very rapid rate meaning that larger problems can quickly exceed available computer memory. The iterative method's memory requirement grows at a much slower pace and is able to handle problems with 500+ degrees of freedom on a single processor. This method benefits from parallelization, and significant speedup can he seen for problems of 100+ degrees-of-freedom.

Platforms.

PubMed

Josko, Deborah

2014-01-01

The advent of DNA sequencing technologies and the various applications that can be performed will have a dramatic effect on medicine and healthcare in the near future. There are several DNA sequencing platforms available on the market for research and clinical use. Based on the medical laboratory scientist or researcher's needs and taking into consideration laboratory space and budget, one can chose which platform will be beneficial to their institution and their patient population. Although some of the instrument costs seem high, diagnosing a patient quickly and accurately will save hospitals money with fewer hospital stays and targeted treatment based on an individual's genetic make-up. By determining the type of disease an individual has, based on the mutations present or having the ability to prescribe the appropriate antimicrobials based on the knowledge of the organism's resistance patterns, the clinician will be better able to treat and diagnose a patient which ultimately will improve patient outcomes and prognosis.

Hydrophobic and porous cellulose nanofibrous screen for efficient particulate matter (PM2.5) blocking

NASA Astrophysics Data System (ADS)

Chen, Liping; Guo, Yi; Peng, Xinsheng

2017-10-01

Particulate matter (PM2.5) pollution in air seriously affects public health. However, both bulk thickness and the accumulation of PM particles typically lead to a quick decline in the air permeability and large pressure drops of the conventional air clean membranes. In this work, we choose cellulose nanofibers (CNFs, a low cost, biodegradable and sustainable material) to form a hydrophobic and porous CNF thin layer on a stainless steel screen (300 mesh with pore size of 48 µm) through a simple filtration-assisted gelation process and subsequent polydimethylsiloxane modification. The prepared hydrophobic CNFs/stainless steel screen demonstrates highly efficient PM2.5 blocking based on size-sieving effect, fast air permeability and long-term durability under natural ventilation conditions in the relative humidity range from 45% to 93%. This technique holds great potential for indoor PM2.5 blocking under natural ventilation conditions.

Blood glucose measurement by glucometer in comparison with standard method in diagnosis of neonatal hypoglycemia.

PubMed

Nayeri, Fatemeh; Shariat, Mamak; Mousavi Behbahani, Hamid Modarres; Dehghan, Padideh; Ebrahim, Bita

2014-01-01

Hypoglycemia is considered as a serious risk factor in neonates. In the majority of cases, it occurs with no clinical symptoms. Accordingly, early diagnosis is extremely imperative, which can also lead to less morbidity and mortality. The aim of this study was to assess the importance of screening blood glucose using glucometer (known as a quick and cost-effective diagnostic test) in comparison with laboratory method. A total of 219 neonates at risk of hypoglycemia were included in this study. Blood glucose was measured by glucometer and laboratory. In addition glucose level of capillary blood was measured by glucometer at the same time. Sensitivity and specificity of capillary blood glucose measurement by glucometer were 83.5%, 97.5% respectively (ppv=80%), (npv=98%). Capillary blood glucose measured by glucometer has an acceptable sensitivity and specificity in measurement of neonatal blood glucose. Therefore measurement by glucometer is recommended as a proper diagnostic test.

A cost-effective method to characterize variation in clinical practice.

PubMed

Chang, K; Sauereisen, S; Dlutowski, M; Veloski, J J; Nash, D B

1999-06-01

This study's objective was to measure variation in physicians' practice styles and policies. Family physicians and general internists were surveyed about evidence-based medicine in the areas of asthma, congestive heart failure, and diabetes mellitus. They were asked about clinical recommendations where standards of practice were uncertain, controversial, or changing in response to published guidelines. Also included were items dealing with managed care. Although there was wide variation in responses to 20 of 36 items, some responses were consistent with practice guidelines. Responses to several items indicated a tendency to overuse expensive tests. Overall, the results indicate that a brief, open-ended survey can assess practice variation quickly and economically, as contrasted with more expensive analyses of medical records or claims data. With proper validation such assessments can be used as baselines to guide interventions, as well as measures of the outcomes of these interventions to change practice styles.

Contagion and differentiation in unethical behavior: the effect of one bad apple on the barrel.

PubMed

Gino, Francesca; Ayal, Shahar; Ariely, Dan

2009-03-01

In a world where encounters with dishonesty are frequent, it is important to know if exposure to other people's unethical behavior can increase or decrease an individual's dishonesty. In Experiment 1, our confederate cheated ostentatiously by finishing a task impossibly quickly and leaving the room with the maximum reward. In line with social-norms theory, participants' level of unethical behavior increased when the confederate was an in-group member, but decreased when the confederate was an out-group member. In Experiment 2, our confederate instead asked a question about cheating, which merely strengthened the saliency of this possibility. This manipulation decreased the level of unethical behavior among the other group members. These results suggest that individuals' unethicality does not depend on the simple calculations of cost-benefit analysis, but rather depends on the social norms implied by the dishonesty of others and also on the saliency of dishonesty.

Block Copolymer Micellization as a Protection Strategy for DNA Origami.

PubMed

Agarwal, Nayan P; Matthies, Michael; Gür, Fatih N; Osada, Kensuke; Schmidt, Thorsten L

2017-05-08

DNA nanotechnology enables the synthesis of nanometer-sized objects that can be site-specifically functionalized with a large variety of materials. For these reasons, DNA-based devices such as DNA origami are being considered for applications in molecular biology and nanomedicine. However, many DNA structures need a higher ionic strength than that of common cell culture buffers or bodily fluids to maintain their integrity and can be degraded quickly by nucleases. To overcome these deficiencies, we coated several different DNA origami structures with a cationic poly(ethylene glycol)-polylysine block copolymer, which electrostatically covered the DNA nanostructures to form DNA origami polyplex micelles (DOPMs). This straightforward, cost-effective, and robust route to protect DNA-based structures could therefore enable applications in biology and nanomedicine where unprotected DNA origami would be degraded. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Second International Conference on Accelerating Biopharmaceutical Development: March 9-12, 2009, Coronado, CA USA.

PubMed

Reichert, Janice M; Jacob, Nitya; Amanullah, Ashraf

2009-01-01

The Second International Conference on Accelerating Biopharmaceutical Development was held in Coronado, California. The meeting was organized by the Society for Biological Engineering (SBE) and the American Institute of Chemical Engineers (AIChE); SBE is a technological community of the AIChE. Bob Adamson (Wyeth) and Chuck Goochee (Centocor) were co-chairs of the event, which had the theme "Delivering cost-effective, robust processes and methods quickly and efficiently." The first day focused on emerging disruptive technologies and cutting-edge analytical techniques. Day two featured presentations on accelerated cell culture process development, critical quality attributes, specifications and comparability, and high throughput protein formulation development. The final day was dedicated to discussion of technology options and new analysis methods provided by emerging disruptive technologies; functional interaction, integration and synergy in platform development; and rapid and economic purification process development.