Sample records for r-tech pilot program

  1. Texas Schools, Inc.: A Case Study of the Transfer of Technology at a Pilot Bilingual Program.

    ERIC Educational Resources Information Center

    Pearson, Vangie L.

    Texas Schools, Inc. (TSI) developed a pilot program in bilingual education for Mexican-American vocational workers in the Department of Diesel Mechanics at Texas Tech University. This study assesses the transfer of technology in that environment using quantitative and qualitative measures. TSI, a technical and vocational school in Lubbock, Texas,…

  2. Project Georgia High School/High Tech

    NASA Technical Reports Server (NTRS)

    2000-01-01

    The High School/High Tech initiative of the President's Committee on Employment of Disabilities, Georgia's application of the collaborative "Georgia Model" and NASA's commitment of funding have shown that opportunities for High School/High Tech students are unlimited. In Georgia, the partnership approach to meeting the needs of this program has opened doors previously closed. As the program grows and develops, reflecting the needs of our students and the marketplace, more opportunities will be available. Our collaboratives are there to provide these opportunities and meet the challenge of matching our students with appropriate education and career goals. Summing up the activities and outcomes of Project Georgia High School/High Tech is not difficult. Significant outcomes have already occurred in the Savannah area as a result of NASA's grant. The support of NASA has enabled Georgia Committee to "grow" High School/High Tech throughout the region-and, by example, the state. The success of the Columbus pilot project has fostered the proliferation of projects, resulting in more than 30 Georgia High School High Tech programs-with eight in the Savannah area.

  3. Program Manager: Journal of the Defense Systems Management College. Volume 16, Number 3, May-June 1987

    DTIC Science & Technology

    1987-06-01

    redress a growingstrategic imbalance and provide an en- test pilots conducted a rigorous flight test during capability to penetrate Soviet program...ment career path for rated officers vidual rotates through assignments in ( pilots and navigators) is different from engineering, test and evaluation...pain. Acquiring the B-1B, or any other weapon system for that matter, entails developing, testing ard producing new technology. In any high-tech en

  4. Environmental Impact Research Program. Proceedings of the US Army Corps of Engineers Riparian Zone Restoration and Management Workshop Held in San Antonio, Texas on 24-27 February 1986

    DTIC Science & Technology

    1988-02-01

    Dwayne G. Lee, CE, was Commander and Director of WES. Dr. Robert W. Whalin was Technical Director. This report should be cited as follows: Martin, Chester...Environmental features for streambank protection projects. U.S. Army Eng. Waterways Exp. Sta., Tech. Rep. E-84-11. 150 pp. Johnson , R. R., and D. A. Jones...Serv. Gen. Tech. Rep. RM-43. 217 pp. 57 Johnson , R. R., and J. F. McCormick (tech. coords.). 1978. Strategies for protection and management of

  5. Four Models of Clinical Supervision in Virginia.

    ERIC Educational Resources Information Center

    Buckley, Pamela K.; And Others

    The Virginia State Department of Education funded four, 3-year pilot clinical faculty programs to provide training and compensation to cooperating teachers for the purpose of improving the supervision of student teachers. Two of the programs which received grants were collaborative projects: partners Virginia Tech University and Hollins College…

  6. Cumulative Index to NASA Tech Briefs

    NASA Technical Reports Server (NTRS)

    1969-01-01

    Tech Briefs are short announcements of new technology derived from the R&D activities of the National Aeronautics and Space Administration. This Index to NASA Tech Briefs lists the technological innovations derived from the U.S. space program and published during the period January through December 1968. A new five year cycle of cumulative indexes begins with this index. The main section is arranged in six categories: Electrical (Electronic); Physical Sciences (Energy Sources); Materials (Chemistry); Life Sciences; Mechanical; and Computer Programs.

  7. Juvenile Offenders: Developing Motivation, Engagement, and Meaning-Making through Video Game Creation

    ERIC Educational Resources Information Center

    Ruggiero, Dana; Garcia de Hurtado, Belen; Watson, William R.

    2013-01-01

    In this study, the authors examined juvenile offender experiences in Project Tech, a research-based educational pilot program to teach socially responsible serious game development at a major Midwest university's Games Lab. Using open-ended interviews, learner feedback surveys, and learner journaling during the program, the researchers examined…

  8. Evaluation of the Washington state target zero teams project : traffic tech.

    DOT National Transportation Integrated Search

    2015-01-01

    In late 2006, the Washington State Patrol (WSP) assembled : a full-time, high-visibility saturation patrol called the Night : Emphasis Enforcement Team (NEET). This pilot program, : based in Snohomish County and funded by the Washington : Traffic Saf...

  9. Operator modeling in commerical aviation: Cognitive models, intelligent displays, and pilot's assistants

    NASA Technical Reports Server (NTRS)

    Govindaraj, T.; Mitchell, C. M.

    1994-01-01

    One of the goals of the National Aviation Safety/Automation program is to address the issue of human-centered automation in the cockpit. Human-centered automation is automation that, in the cockpit, enhances or assists the crew rather than replacing them. The Georgia Tech research program focused on this general theme, with emphasis on designing a computer-based pilot's assistant, intelligent (i.e, context-sensitive) displays, and an intelligent tutoring system for understanding and operating the autoflight system. In particular, the aids and displays were designed to enhance the crew's situational awareness of the current state of the automated flight systems and to assist the crew's situational awareness of the current state of the automated flight systems and to assist the crew in coordinating the autoflight system resources. The activities of this grant included: (1) an OFMspert to understand pilot navigation activities in a 727 class aircraft; (2) an extension of OFMspert to understand mode control in a glass cockpit, Georgia Tech Crew Activity Tracking System (GT-CATS); (3) the design of a training system to teach pilots about the vertical navigation portion of the flight management system -VNAV Tutor; and (4) a proof-of-concept display, using existing display technology, to facilitate mode awareness, particularly in situations in which controlled flight into terrain (CFIT) is a potential.

  10. Technology Predictors of Inquiry-Based Teaching: An Examination of Two K-12 1:1 Pilots

    ERIC Educational Resources Information Center

    Theis, Jennifer Lee

    2016-01-01

    The purpose of this study was to examine the relationship of technology use and facilitation of inquiry-based teaching across the curriculum through the implementation of a one-to-one technology pilot. This study also explored which technology related factors (Teacher Tech Use, Student Tech Use, Tech Barriers, Teacher Comfort) best predict the use…

  11. Tech Flex

    ERIC Educational Resources Information Center

    Demski, Jennifer

    2012-01-01

    On many college campuses, the 21st century classroom is the exception rather than the norm. Here's what usually happens: A forward-thinking administrator pushes for a pilot program to redesign a handful of classrooms. The resulting learning spaces are cutting edge and successful--in high demand among faculty and students alike. And that's as far…

  12. Illinois Tech Prep Planning Strategies.

    ERIC Educational Resources Information Center

    Illinois Univ., Urbana. Dept. of Vocational and Technical Education.

    This tech prep planning handbook is based on the research conducted at the Office of Community College Research and Leadership, University of Illinois at Urbana-Champaign. The study involved information gathering procedures at each of the 17 tech prep pilot sites about their planning activities. Seven sections are included: (1) tech prep in…

  13. C.P.R.: Promoting Cooperation, Participation and Respect in Physical Education

    ERIC Educational Resources Information Center

    Meaney, Karen S.; Kopf, Kelcie

    2010-01-01

    The Health, Exercise, and Sport Science (HESS) faculty at Texas Tech University, along with many of its graduate and undergraduate students, have been working with overweight youth since the Fun & Fit program launched in 2004. The collaborative effort between Tech and the Lubbock Independent School District, funded by a Carol M. White Physical…

  14. Cumulative index to NASA Tech Briefs, 1986-1990, volumes 10-14

    NASA Technical Reports Server (NTRS)

    1992-01-01

    Tech Briefs are short announcements of new technology derived from the R&D activities of the National Aeronautics and Space Administration. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This cumulative index of Tech Briefs contains abstracts and four indexes (subject, personal author, originating center, and Tech Brief number) and covers the period 1986 to 1990. The abstract section is organized by the following subject categories: electronic components and circuits, electronic systems, physical sciences, materials, computer programs, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences.

  15. Interim Report on Ed Tech PILOTS. A Report to the 78th Texas Legislature from the Texas Education Agency.

    ERIC Educational Resources Information Center

    Texas Education Agency, Austin.

    The primary goals of the Texas Education Agency's Educational Technologies Providing Increased Learning Opportunities for Texas Students (Ed Tech PILOTS) are to employ technology to more efficiently and effectively delivery information to students and teachers to enhance the efficacy of classroom instruction. This interim report discusses the…

  16. "Tech-check-tech": a review of the evidence on its safety and benefits.

    PubMed

    Adams, Alex J; Martin, Steven J; Stolpe, Samuel F

    2011-10-01

    The published evidence on state-authorized programs permitting final verification of medication orders by pharmacy technicians, including the programs' impact on pharmacist work hours and clinical activities, is reviewed. Some form of "tech-check-tech" (TCT)--the checking of a technician's order-filling accuracy by another technician rather than a pharmacist--is authorized for use by pharmacies in at least nine states. The results of 11 studies published since 1978 indicate that technicians' accuracy in performing final dispensing checks is very comparable to pharmacists' accuracy (mean ± S.D., 99.6% ± 0.55% versus 99.3% ± 0.68%, respectively). In 6 of those studies, significant differences in accuracy or error detection rates favoring TCT were reported (p < 0.05), although published TCT studies to date have had important limitations. In states with active or pilot TCT programs, pharmacists surveyed have reported that the practice has yielded time savings (estimates range from 10 hours per month to 1 hour per day), enabling them to spend more time providing clinical services. States permitting TCT programs require technicians to complete special training before assuming TCT duties, which are generally limited to restocking automated dispensing machines and filling unit dose batches of refills in hospitals and other institutional settings. The published evidence demonstrates that pharmacy technicians can perform as accurately as pharmacists, perhaps more accurately, in the final verification of unit dose orders in institutional settings. Current TCT programs have fairly consistent elements, including the limitation of TCT to institutional settings, advanced education and training requirements for pharmacy technicians, and ongoing quality assurance.

  17. Communications for Lifelong Success I and II (Tech Prep English I and II). Pilot Test Materials for Pendleton High School, Pendleton, South Carolina. Draft.

    ERIC Educational Resources Information Center

    Turlington, Anita; And Others

    These instructional materials include six supplementary units for Tech Prep English I (grade 9) and six assignments for Tech Prep English II (grade 10). The Tech Prep English I units have these components: unit objectives, introduction, and follow-up exercises. Topics include goal setting, problem solving and decision making, listening and reading…

  18. Draft project management update to the Iowa DOT Project Development Manual : tech transfer summary.

    DOT National Transportation Integrated Search

    2016-08-01

    The Iowa DOT applied and was selected to receive User Incentive : funding from the U.S. DOT Federal Highway Administration (FHWA) : for the SHRP 2 R10 Implementation Assistance Program. Through the : program, the Iowa DOT plans to utilize the results...

  19. Impact of newer self-monitoring technology and brief phone-based intervention on weight loss: a randomized pilot study

    PubMed Central

    Ross, Kathryn M.; Wing, Rena R.

    2016-01-01

    Objective Despite the proliferation of newer self-monitoring technology (e.g., activity monitors and smartphone apps), their impact on weight loss outside of structured in-person behavioral intervention is unknown. Methods A randomized, controlled pilot study was conducted to examine efficacy of self-monitoring technology, with and without phone-based intervention, on 6-month weight loss in adults with overweight and obesity. Eighty participants were randomized to receive standard self-monitoring tools (ST, n=26), technology-based self-monitoring tools (TECH, n=27), or technology-based tools combined with phone-based intervention (TECH+PHONE, n=27). All participants attended one introductory weight loss session and completed assessments at baseline, 3 months, and 6 months. Results Weight loss from baseline to 6 months differed significantly between groups p=.042; there was a trend for TECH+PHONE (−6.4±1.2kg) to lose more weight than ST (−1.3±1.2kg); weight loss in TECH (−4.1±1.4kg) was between ST and TECH+PHONE. Fewer ST (15%) achieved ≥5% weight losses compared to TECH and TECH+PHONE (44%), p=.039. Adherence to self-monitoring caloric intake was higher in TECH+PHONE than TECH or ST, ps<.05. Conclusion These results suggest use of newer self-monitoring technology plus brief phone-based intervention improves adherence and weight loss compared to traditional self-monitoring tools. Further research should determine cost-effectiveness of adding phone-based intervention when providing self-monitoring technology. PMID:27367614

  20. Human-Centered Design of Human-Computer-Human Dialogs in Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Mitchell, Christine M.

    1998-01-01

    A series of ongoing research programs at Georgia Tech established a need for a simulation support tool for aircraft computer-based aids. This led to the design and development of the Georgia Tech Electronic Flight Instrument Research Tool (GT-EFIRT). GT-EFIRT is a part-task flight simulator specifically designed to study aircraft display design and single pilot interaction. ne simulator, using commercially available graphics and Unix workstations, replicates to a high level of fidelity the Electronic Flight Instrument Systems (EFIS), Flight Management Computer (FMC) and Auto Flight Director System (AFDS) of the Boeing 757/767 aircraft. The simulator can be configured to present information using conventional looking B757n67 displays or next generation Primary Flight Displays (PFD) such as found on the Beech Starship and MD-11.

  1. Tech-Prep in New York State: Profiles of Four Diverse Programs.

    ERIC Educational Resources Information Center

    Frenkel, Michael W.; Brodsky, Stanley M.

    These case studies highlight the diversity of four tech programs that responded with a unique set of organizational policies and procedures to a unique set of challenges. The case study on City Tech Tech-Prep Consortium in Brooklyn focuses on three strategies: transition to City Tech program, postsecondary component, and program evaluation. The…

  2. United States Air Force Summer Faculty Research Program. 1988 Program Technical Report. Volume 1

    DTIC Science & Technology

    1988-12-01

    Laboratory: Rose-Hulman Institute of Tech. Logistics & Human Factors Div. 5500 Wabash Terre Haute, IN 47803 (812) 877-1511 Dr. David R. Cecil Degree...to detect those frequencies with our mercury- cadmium detector at Northridge, we were 16-7 unable to obtain this information with the indium-antinimide

  3. 36 CFR 223.275 - Establishment of a pilot program.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Establishment of a pilot... Establishment of a pilot program. This subpart governs the Forest Service's pilot program for the disposal of... of Title III of H.R. 3423)), as amended in 2004 by Section 335 of Public Law 108-108. The pilot...

  4. MiTEP's Collaborative Field Course Design Process Based on Earth Science Literacy Principles

    NASA Astrophysics Data System (ADS)

    Engelmann, C. A.; Rose, W. I.; Huntoon, J. E.; Klawiter, M. F.; Hungwe, K.

    2010-12-01

    Michigan Technological University has developed a collaborative process for designing summer field courses for teachers as part of their National Science Foundation funded Math Science Partnership program, called the Michigan Teacher Excellence Program (MiTEP). This design process was implemented and then piloted during two two-week courses: Earth Science Institute I (ESI I) and Earth Science Institute II (ESI II). Participants consisted of a small group of Michigan urban science teachers who are members of the MiTEP program. The Earth Science Literacy Principles (ESLP) served as the framework for course design in conjunction with input from participating MiTEP teachers as well as research done on common teacher and student misconceptions in Earth Science. Research on the Earth Science misconception component, aligned to the ESLP, is more fully addressed in GSA Abstracts with Programs Vol. 42, No. 5. “Recognizing Earth Science Misconceptions and Reconstructing Knowledge through Conceptual-Change-Teaching”. The ESLP were released to the public in January 2009 by the Earth Science Literacy Organizing Committee and can be found at http://www.earthscienceliteracy.org/index.html. Each day of the first nine days of both Institutes was focused on one of the nine ESLP Big Ideas; the tenth day emphasized integration of concepts across all of the ESLP Big Ideas. Throughout each day, Michigan Tech graduate student facilitators and professors from Michigan Tech and Grand Valley State University consistantly focused teaching and learning on the day's Big Idea. Many Earth Science experts from Michigan Tech and Grand Valley State University joined the MiTEP teachers in the field or on campus, giving presentations on the latest research in their area that was related to that Big Idea. Field sites were chosen for their unique geological features as well as for the “sense of place” each site provided. Preliminary research findings indicate that this collaborative design process piloted as ESI I and ESI II was successful in improving MiTEP teacher understanding of Earth Science content and that it was helpful to use the ESLP framework. Ultimately, a small sample of student scores will look at the impact on student learning in the MiTEP teacher classrooms.

  5. Annotated Bibliography of Publications from the U.S. Navy’s Marine Mammal Program. Revision D.

    DTIC Science & Technology

    1998-05-01

    Artificial Insemination of Bottlenosed Dolphins. In: The Bottlenosed Dolphin, J. S. Leatherwood and R. R. Reeves (eds.). Academic Press, San Diego, CA...pp. 447-460. 88 The development of semen collection, cryopreservation, and artificial insemination tech- niques for dolphins is reported...R. A. Kastelein (eds.). Plenum Press, New York, pp. 203- 216. Reviews dolphin sonar detection experiments in artificial and natural noise

  6. Combustion characterization of carbonized RDF, Joint Venture Task No. 7. Topical Report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None, None

    1995-04-30

    The overall objective of this research program was to demonstrate EnerTech's and the Energy & Environmental Research Center's (EERC) process of slurry carbonization for producing homogeneous, pumpable titels from refuse-derived fuel (RDF) with continuous pilot plant facilities, and to characterize flue gas and ash emissions from combustion of the carbonizd RDF slurry fuel. Please note that "Wet Thermal Oxidation" is EnerTech's trademark mme for combustion of the carbonized RDF slurry fuel. Carbonized RDF slurry fuels were produced with the EERC'S 7.5-tpd (wet basis) pilot plant facility. A hose diaphragm pump pressurized a 7- lo-wt% feed RDF slurry, with a viscositymore » of 500 cP, to approximately 2500 psig. The pressurized RDF slurry was heated by indirect heat exchangers to between 5850 -626°F, and its temperature and pressure was maintained in a downflow reactor. The carbonized slurry was flashed, concentrated in a filter press, and ground in an attritor. During operation of the pilot plant, samples of the feed RDF slurry, carbonization gas, condensate, carbonized solids, and filtrate were taken and analyzed. Pilot-scale slurry carbonization experiments with RDF produced a homogeneous pumpable slurry fuel with a higher heating value (HHV) of 3,000-6,600 Btu/lb (as-received basis), at a viscosity of 500 CP at 100 Hz decreasing, and ambient temperature. Greater-heating-value slurry fuels were produced at higher slurry carbonization temperatures. During slurry carbonization, polyvinyl chloride (PVC) plastics in the feed RDF also decompose to form hydrochloric acid and salts. Pilot-scale slurty carbonization experiments extracted 82-94% of the feed RDF chlorine content as chloride salts. Higher carbonization temperatures and higher alkali additions to the feed slurry produced a higher chlorine extraction.« less

  7. Effects of Different Distributions of Training Time on the Acquisition of Contact Flying Skills

    DTIC Science & Technology

    1981-07-01

    evaluate their own performance. PERCEPTION OF TRAINING. Based orn their general response to the Student Opinion Survey, the students in both programs felt...analy- sis. Dr. Jerry M. Childs and Mr. Edward Miller of Seville aided in the devel- oment of the pilot performance measurement instruments. Mr. E. Peter...J. B., Childs , J. M., Prophet, W. W., & Spears, W. L. Human factors problems in general aviation (Tech. Rep. FAA-CT-80-194). Washington, DC: Federal

  8. How To Implement a Tech Prep Program Based on the Rhode Island Model. Tech Prep Associate Degree Program. Technical Programs. Business/Office Administration Programs. Allied Health/Dental Health Programs.

    ERIC Educational Resources Information Center

    Community Coll. of Rhode Island, Warwick.

    This implementation guide contains information based on experiences that occurred during the development and implementation of the Rhode Island Tech Prep Model. It is intended to assist educators in addressing challenges and obstacles faced by the program early in the planning process. It begins with a rationale for tech prep. Rhode Island…

  9. Proceedings of the Annual Meeting of the Council for Programs in Technical and Scientific Communication (14th, Orlando, Florida, October 7-9, 1987).

    ERIC Educational Resources Information Center

    Geonetta, Sam C., Ed.

    Based on the notion of "reaching out," this proceedings presents papers from the annual meeting of the Council for Programs in Technical and Scientific Communication. Papers in the proceedings are: "Southern Tech's Technical Writing Certificate" (William S. Pfeiffer); "Reach Out and Quack Someone" (Daniel R. Jones);…

  10. NASA's Impact in Florida: A Tech Transfer Perspective

    NASA Technical Reports Server (NTRS)

    Dunn, Carol

    2009-01-01

    The Innovative Partnerships Program (IPP) Office at NASA's Kennedy Space Center is dedicated to forming partnerships that can positively contribute to -- and benefit from -- NASA's research and development (R&D) and technology innovations. This document discusses the IPP-driven impacts of NASA in Florida.

  11. 34 CFR 406.1 - What is the State-Administered Tech-Prep Education Program?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 3 2011-07-01 2011-07-01 false What is the State-Administered Tech-Prep Education... (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE-ADMINISTERED TECH-PREP EDUCATION PROGRAM General § 406.1 What is the State-Administered Tech-Prep Education Program? If the annual...

  12. Department of Defense In-House RDT&E Activities

    DTIC Science & Technology

    1979-10-30

    OIVAI .. I-:JNLI’IONS/EQJIPMtN’r/CAPAt3ILIrflt.4 tNC’i4PAb-Eý, APPLO RUA INCL WRC DEV AND) SPT IN INTI:RLO got: ~ISI6 ANALYSIS. JAM,IJEtPSi(7 iNrt7L...LU*. CAPT. R. 4. tsROWN TECH1.L1R. MR. THOMAS RAMIREZ F. ~PROGRAM LJATA BY FISCAL YEAR (MILLION S PiKOtRAM 1979 IQ80fk~(ACTUJAL) (ACT + EsT) TUTAL

  13. Development of a Computer Program for Store Airloads Prediction Technique

    DTIC Science & Technology

    1976-10-01

    W0N0000 44)N. )..04N4 tSNCN0U Y’~~~ Wo 0 JN*%O 0 W’ 0, 0 MOOC U gOO- 0*00 tf4-O gsU 0ow .4,0 4P- NNC0.z maot)m .Jrnu’ a" .r m (IN 0~."DNQ 40) 0440 a0...Code S 33)/Tech Lib 1 Sandia Lab/Tech Lib Div 3141 1 Rand Corp/ Library -D 1 TACTEC 1 USAFTAWC/TEFA 1 TAWC/TRADOCLO1 ADTC/SES 1 ADTC/SD23 1 AFATL/DL 1AFATL

  14. 76 FR 68243 - Youth Leadership Program: TechGirls

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-03

    ... DEPARTMENT OF STATE [Public Notice: 7671] Youth Leadership Program: TechGirls Overview Information Bureau of Educational and Cultural Affairs (ECA) Request for Grant Proposals: Youth Leadership Program... Cultural Affairs (ECA) announces an open competition for the new Youth Leadership Program ``TechGirls...

  15. Evaluation of current Louisiana flexible pavement structures using PMS data and new mechanistic-empirical pavement design guide : tech summary.

    DOT National Transportation Integrated Search

    2012-04-01

    The new Mechanistic-Empirical Pavement Design Guide (MEPDG) developed under the National Cooperative Highway : Research Program (NCHRP) Project 1-37A represents a major change as compared to the 1993 AASHTO Pavement : Design Guide. MEPDG provides a r...

  16. 34 CFR 406.31 - How does a State carry out the State-Administered Tech-Prep Education Program?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 3 2011-07-01 2011-07-01 false How does a State carry out the State-Administered Tech... TECH-PREP EDUCATION PROGRAM What Conditions Must Be Met After a State Receives an Award? § 406.31 How does a State carry out the State-Administered Tech-Prep Education Program? (a) A State board carries...

  17. Evaluation of the Advanced Situational Awareness Training Pilot Program

    DTIC Science & Technology

    2017-02-01

    M., Holder, L. D., Leibrecht, B. C ., Garland, D. J ., Wampler, R. L., & Matthews, M. D. (2000). Modeling and measuring situation awareness in the...Ware, L. J ., Ratcliff, J . J ., & Irvin, C . R. (2009). Evidence of the camera perspective bias in authentic videotaped interrogations: Implications...Advanced Situational Awareness Training Pilot Program 5a. CONTRACT OR GRANT NUMBER W5J9CQ-11- C -0040 5b. PROGRAM ELEMENT NUMBER 633007 6

  18. Impact of the Siena College Tech Valley Scholars Program on Student Outcomes

    ERIC Educational Resources Information Center

    Medsker, Larry; Allard, Lee; Tucker, Lucas J.; O'Donnell, Jodi L.; Sterne-Marr, Rachel; Bannon, Jon; Finn, Rose; Weatherwax, Allan

    2016-01-01

    The Tech Valley Scholars (TVS) program included 38 students who joined this program over the course of three academic years, from 2009 to 2012. These students comprise the experimental group for this study to determine if participating in the NSF-funded Tech Valley Scholars program improved academic outcomes. The experimental group was compared to…

  19. Tech-Prep/Associate Degree Program Guide: Tech Prep Associate Degree Program, Business Administration Associate Degree Program, Office Administration Associate Degree Program, Allied Health Associate Degree Program.

    ERIC Educational Resources Information Center

    Marmaras, Judy; Neri, Pat

    The Tech-Prep Associate Degree Program (TPAD) at the Community College of Rhode Island (CCRI) in Warwick, is a high school/community college partnership providing high school students with an alternative program of study focused on goal setting, basic academic skills development, and the skills needed to pursue a career in a technical, business or…

  20. Get on Board the Cost Effective Way: A Tech Prep Replication Process.

    ERIC Educational Resources Information Center

    Moore, Wayne A.; Szul, Linda F.; Rivosecchi, Karen

    1997-01-01

    The Northwestern Pennsylvania Tech Prep Consortium model for replicating tech prep programs includes these steps: fact finding, local industry analysis, curriculum development, detailed description, marketing strategies, implementation, and program evaluation. (SK)

  1. Disability Evaluation System Analysis and Research Annual Report 2017

    DTIC Science & Technology

    2017-11-20

    Amanda L. Kelley, MPH Program Manager, AMSARA Deputy Program Manager, AMSARA Contractor, ManTech Health Contractor, ManTech Health Christine...Toolin, MS Cordie K. Campbell, MPH Public Health Analyst, AMSARA Public Health Analyst, AMSARA Contractor, ManTech Health Contractor...ManTech Health Preventive Medicine Branch Walter Reed Army Institute of Research 503 Robert Grant Road, Forest Glen Annex Silver

  2. SEI Report on Graduate Software Engineering Education for 1991

    DTIC Science & Technology

    1991-04-01

    12, 12 (Dec. 1979), 85-94. Andrews83 Andrews, Gregory R . and Schneider, Fred B. “Concepts and Notations for Concurrent Programming.” ACM Computing...Barringer87 Barringer , H. “Up and Down the Temporal Way.” Computer J. 30, 2 (Apr. 1987), 134-148. Bjørner78 The Vienna Development Method: The Meta-Language...Lecture Notes in Computer Science. Bruns86 Bruns, Glenn R . Technology Assessment: PAISLEY. Tech. Rep. MCC TR STP-296-86, MCC, Austin, Texas, Sept

  3. Tech Prep Marketing Guide. The Complete Book of Strategies and Practical Experiences.

    ERIC Educational Resources Information Center

    Williamson, Patty

    This guide explains the concept of marketing tech prep and provides marketing principles and strategies to promote tech prep programs. The guide covers the following topics: (1) why it is necessary to market tech prep; (2) what a comprehensive tech prep marketing plan should include; (3) targeting the benefits message; (4) marketing tech prep to…

  4. Development of a Career Student Guide for the Tech Prep Program for Henry County High School.

    ERIC Educational Resources Information Center

    Winchester, Ruth Ann

    This practicum report describes the research conducted in preparation for developing a career student guide to acquaint students attending Henry County High School (HCHS) in McDonough, Georgia, with the school's new tech prep program. Chapters 1 and 2 contain background information about HCHS' tech prep program and a review of literature regarding…

  5. Tech Prep Compendium of Models. [Revised].

    ERIC Educational Resources Information Center

    Delaware Technical and Community Coll., Dover.

    This publication discusses four models for technical preparation (tech prep): program organization; student progress; tech prep data collection and evaluation model; and school/community. The program organization model is divided into four sections. Section I, the business industry, and labor section, shows the flow from craft committee and…

  6. Planning a Successful Tech Show

    ERIC Educational Resources Information Center

    Nikirk, Martin

    2011-01-01

    Tech shows are a great way to introduce prospective students, parents, and local business and industry to a technology and engineering or career and technical education program. In addition to showcasing instructional programs, a tech show allows students to demonstrate their professionalism and skills, practice public presentations, and interact…

  7. Guidelines for Simulator-Based Marine Pilot Training Programs

    DTIC Science & Technology

    1985-03-01

    Excellent’ Saifat Marginal Iiwartisfdc tory C oe n t s 0 / /0// .-ON I- FX- D OF V/L W L/wiT5. j :4 EX ER/? 15 r--5. 5Imu,1-tQ/0AJ OP- [319A/< E-.FPrc.r...REPOrT No. CG- D -25-85 CAORF-50-83 18-02 It) TECHNICAL REPORT GUIDELINES FOR SIMULATOR-BASED MARINE PILOT TRAINING PROGRAMS Reproduced From Best...constitute a standard, specification, or regulation. . Acoesson For - NTIS 7 &1 PTIC’ T,,R [_ 000, D.st r .. D !vr 4 i a -1 BIBLIOGRAPHIC DATA .Repof" No. 2. 3

  8. Automatic Synthesis of Fine-Motion Strategies for Robots.

    DTIC Science & Technology

    1983-12-01

    ADA-A39 532 AUTOMATI CSYNTHESISOF FNE-MOTIONSTRATEGIESFORa R080 S(U) MASSACHUSETTS INS OF TECH CAMBRIDOE ARTIFCIAL INTELLGENCE LAB IOZANO-PEREZ DEC...N00014-82-K-0334 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK Artificial Intelligence Laboratory AREA...provides correct- ness criteria for compliant motion strategies. MASSACHUSETTS INSTITUTE OF TECHNOLOGY ARTIFICIAL INTELLIGENCE LABORATORY A. I. MEMO 759

  9. School-to-Work Apprenticeship. Project Manual 1993-1994.

    ERIC Educational Resources Information Center

    Lee Coll., Baytown, TX.

    With Perkins tech prep funds, Lee College (Baytown, Texas), working with the Gulf Coast Tech Prep Consortium and the Goose Creek Consolidated Independent School District, developed a school-to-work apprenticeship model for tech prep programs. An advisory committe provided guidance in identifying targeted apprenticeable jobs, program content, and…

  10. Strategic directions and mechanisms in technology transfer

    NASA Technical Reports Server (NTRS)

    Mackin, Robert

    1992-01-01

    An outline summarizing the Working Panel discussion related to strategic directions for technology transfer is presented. Specific topics addressed include measuring success, management of technology, innovation and experimentation in the tech transfer process, integration of tech transfer into R&D planning, institutionalization of tech transfer, and policy/legislative resources.

  11. High School/High Tech Program Guide: An Implementation Guide for High School/High Tech Program Coordinators. Promoting Careers in Science and Technology for High School Students with Disabilities.

    ERIC Educational Resources Information Center

    Office of Disability Employment Policy (DOL), Washington, DC.

    This implementation guide is intended to assist educators in planning, establishing, building, and managing a High School/High Tech project for high school students with disabilities. The program is designed to develop career opportunities, provide activities that will spark an interest in high technology fields, and encourage students to pursue…

  12. Does the Number of College Credits Earned in a Tech Prep and Postsecondary Enrollment Options Program Predict College Success?

    ERIC Educational Resources Information Center

    Meyer, Bruce A.

    2011-01-01

    The purpose of this study was to examine a Tech Prep Program located in Northwest Ohio and determine the degree to which college credits earned in high school through the Tech Prep and PSEO Programs predict college success and if there were any significant gender/race differences in credits earned and college success as well as high school…

  13. The Effects of US Army Chemical Protective Clothing on Speech Intelligibility, Visual Field, Body Mobility and Psychomotor Coordination of Men

    DTIC Science & Technology

    1987-09-01

    soldiers wearing NBC clothing in hot/humid and hot/dry climates (Report MRL-R-826).Ascot Vale, Victoria, Australia : Materials Research Laboratories...Development and Engineering Center. 47. White, R.M. and Churchill, E. (1971). The body size of soldier-: U.S. Army anthropometry - 1966 (Tech. Rep. 72... Anthropometry of U.S. Army aviators - 1970 (Tech. Rep. 72-52-CE). Natick, MA: US Army Natick Laboratories. (AD 743 528) 112 ,7 r4 r

  14. Med-Tech Program. Tech Prep Final Report.

    ERIC Educational Resources Information Center

    Chicago Public Schools, IL.

    Staff from DuSable High School in Chicago, Illinois, collaborated with Malcolm X College and three area hospitals to develop a medical technician training program focusing on career awareness and development of the basic reading and math skills needed for any career. A 3-year Med Tech curriculum for grades 9, 10, and 11 and a career awareness…

  15. Integrated design and manufacturing for the high speed civil transport

    NASA Technical Reports Server (NTRS)

    Lee, Jae Moon; Gupta, Anurag; Mueller, Craig; Morrisette, Monica; Dec, John; Brewer, Jason; Donofrio, Kevin; Sturisky, Hilton; Smick, Doug; An, Meng Lin

    1994-01-01

    In June 1992, the School of Aerospace Engineering at Georgia Tech was awarded a three year NASA University Space Research Association (USRA) Advanced Design Program (ADP) grant to address issues associated with the Integrated Design and Manufacturing of High Speed Civil Transport (HSCT) configurations in its graduate Aerospace Systems Design courses. This report provides an overview of the on-going Georgia Tech initiative to address these design/manufacturing issues during the preliminary design phases of an HSCT concept. The new design methodology presented here has been incorporated in the graduate aerospace design curriculum and is based on the concept of Integrated Product and Process Development (IPPD). The selection of the HSCT as a pilot project was motivated by its potential global transportation payoffs; its technological, environmental, and economic challenges; and its impact on U.S. global competitiveness. This pilot project was the focus of each of the five design courses that form the graduate level aerospace systems design curriculum. This year's main objective was the development of a systematic approach to preliminary design and optimization and its implementation to an HSCT wing/propulsion configuration. The new methodology, based on the Taguchi Parameter Design Optimization Method (PDOM), was established and was used to carry out a parametric study where various feasible alternative configurations were evaluated. The comparison criterion selected for this evaluation was the economic impact of this aircraft, measured in terms of average yield per revenue passenger mile ($/RPM).

  16. Iowa High School High Tech: Promoting Careers in Technology for Students with Disabilities. Final Report and Implementation Manual.

    ERIC Educational Resources Information Center

    McQuillen, Terry; Nietupski, John; Berg, Deana Duncan; Daugherty, Vicki; Bildstein, Stephanie

    This final report and implementation manual describes the activities and outcomes of Iowa's High School High Tech (HSHT) program, a joint effort of Grant Wood Area Education Agency and Goodwill Industries of Southeast Iowa to inspire students with disabilities to pursue high tech careers. The program provides opportunities for students to learn…

  17. Integrated Technical Curriculum. Curriculum Developed for Project Second Chance II: Tech Reading, Tech Science, Tech Math, Automotive.

    ERIC Educational Resources Information Center

    Sorensen, Mary K.; And Others

    This integrated technical curriculum is designed to enroll and retain adult high school noncompleters in occupational programs by providing them with the remedial and content-area reading instruction needed for success in an automotive program. The following topics are covered in the four units: (1) skills for reading technical materials (basics…

  18. Effects of an 8-Week Outdoor Brisk Walking Program on Fatigue in Hi-Tech Industry Employees: A Randomized Control Trial.

    PubMed

    Wu, Li-Ling; Wang, Kuo-Ming; Liao, Po-I; Kao, Yu-Hsiu; Huang, Yi-Ching

    2015-10-01

    Over 73% of hi-tech industry employees in Taiwan lack regular exercise. They are exposed to a highly variable and stressful work environment for extended periods of time, and may subsequently experience depression, detrimental to workers' physiological and mental health. In this cross-sectional survey, the authors explored the effect of an 8-week brisk walking program on the fatigue of employees in the hi-tech industry. The participants, from a hi-tech company in northern Taiwan, were randomly assigned to an experimental group (EG; 41 subjects, Mage = 33.34 ± 6.40) or control group (CG; 45 subjects, Mage = 29.40 ± 3.60). Following the 8-week brisk walking program, the EG showed significantly lower scores for subjective fatigue, working motivation, attention, and overall fatigue. The authors confirmed that the 8-week outdoor brisk walking program significantly improved the level of fatigue among employees of the hi-tech industry. The finding serves as an important reference for health authorities in Taiwan and provides awareness of workplace health promotion in the hi-tech industry. © 2015 The Author(s).

  19. 34 CFR 406.4 - What regulations apply?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., DEPARTMENT OF EDUCATION STATE-ADMINISTERED TECH-PREP EDUCATION PROGRAM General § 406.4 What regulations apply? The following regulations apply to the State-Administered Tech-Prep Education Program: (a) The...

  20. Pilot performance, strategy, and workload while executing approaches at steep angles and with lower landing minima.

    PubMed

    Boehm-Davis, Deborah A; Casali, John G; Kleiner, Brian M; Lancaster, Jeffrey A; Saleem, Jason J; Wochinger, Kathryn

    2007-10-01

    We examined the willingness and ability of general aviation pilots to execute steep approaches in low-visibility conditions into nontowered airports. Executing steep approaches in poor weather is required for a proposed Small Aircraft Transportation System (SATS) that consists of small aircraft flying direct routes to a network of regional airports. Across two experiments, 17 pilots rated for Instrument Flight Rules at George Mason University or Virginia Tech flew a Cessna 172R simulator into Blacksburg, Virginia. Pilots were familiarized with the simulator and asked to fly approaches with either a 200- or 400-foot ceiling (at approach angles of 3 degrees, 5 degrees, and 7 degrees in the first experiment, 3 degrees and 6 degrees in the second). Pilots rated subjective workload and the simulator recorded flight parameters for each set of approaches. Approaches with a 5 degree approach angle produced safe landings with minimal deviations from normal descent control configurations and were rated as having a moderate level of workload. Approaches with 6 degree and 7 degree approach angles produced safe landings but high workload ratings. Pilots reduced power to control the speed of descent and flew the aircraft slightly above the glide path to gain time to control the landing. Although the 6 degree and 7 degree approaches may not be practical for routine approaches, they may be achievable in the event of an emergency. Further work using other aircraft flying under a wider variety of conditions is needed before implementing SATS-type flights into airports intended to supplant or complement commercial operations in larger airports.

  1. Natural Object Categorization.

    DTIC Science & Technology

    1987-11-01

    6-A194 103 NATURAL OBJECT CATEGORIZATION(U) MASSACHUSETTS INST OF 1/3 TECH CAMBRIDGE ARTIFICIAL INTELLIGENCE LAB R F DBICK NOY 87 AI-TR-1091 NBSSI4...ORGANI1ZATION NAME AN40 ACORES$ 10. PROGRAM ELEMENT. PROJECT. TASK Artificial Inteligence Laboratory AREA A WORK UNIT MUMBERS 545 Technology Square Cambridge...describes research done at the Department of Brain and Cognitive Sciences and the Artificial Intelligence Laboratory at the Massachusetts Institute of

  2. Impacts of Academic R&D on High-Tech Manufacturing Products: Tentative Evidence from Supercomputer Data

    ERIC Educational Resources Information Center

    Le, Thanh; Tang, Kam Ki

    2015-01-01

    This paper empirically examines the impact of academic research on high-tech manufacturing growth of 28 Organisation for Economic Co-operation and Development (OECD) and emerging countries over the 1991-2005 period. A standard research and development (R&D) expenditure based measure is found to be too general to capture the input in high-tech…

  3. Planning a Tech Prep Program in Hospitality. Final Report.

    ERIC Educational Resources Information Center

    Chicago City Colleges, IL. Chicago City-Wide Coll.

    A project conducted to establish tech prep articulation training agreements between City Colleges of Chicago and several public secondary schools is described in this report. Project activities were as follows: (1) developed a handbook to define the tech prep experience and guide committee members on how tech prep can be a valuable asset to…

  4. Remotely Piloted Aircraft (RPA) Performing the Air Refueling Mission

    DTIC Science & Technology

    2012-06-01

    Expeditionary Center librarian , thank you for your year- long continual search for any and all references applicable to this study. To my classmate Major...priorities about which missions will require certified pilots and which do not; whether low-cost, low-tech alternatives exist to do basic reconnaissance...flights in civil airspace! The Federal Aviation Administration (FAA) recognizes that a certifiable “detect, sense, and avoid” solution to the “see

  5. The Boeing Company's Tech Prep Story: A Community College Bridge to the School-to-Work Strategy.

    ERIC Educational Resources Information Center

    Gayton, Carver; Parnell, Dale

    1996-01-01

    Reviews the Boeing Tech Prep Program, an associate degree program combining high school and community college vocational and academic curricula. Describes the three phases of the program's development: the provision of seed grants to schools, the development of an associate degree program, and the institution of an internship program. (MAB)

  6. Evaluation of Automated Configuration Management Tools in Ada Programming Support Environments.

    DTIC Science & Technology

    1984-03-01

    82174.> 00. r11 2-. 4-42% wqC)e 0 000 CU 00 u 0 4 V to 4- 1 ( 1 ) ( 1 )Cl 0- onI I-n 0 4)U- (a 0 ca IVI 4-) 0 aI 0 - 4- 1 U .,4 4.1 934 0 a - 1 0 0 0 qva 41 04...AD--R14@ 982 EVALUATION OF AUTOMATED CONFIGURATION MANAGEMENT TOOLS 1 /2 IN ADA PROGRAMMING..(U) AIR FORCE INST OF TECH WRIGHT-PATTERSON AFB OH...SCHOOL OF ENGI. M S ORNDORFF UNCLASSIFIED MAR 84 AFIT/GCS/EE/84M- 1 F/’G 5/i N EEEEEEEEEEomiE EEEEohEEmhEmhE II LA1111 J2. L I,..6 MICROCOPY RESOLUTION TEST

  7. Selected Outcomes Related to Tech Prep Implementation by Illinois Consortia, 2001-2005

    ERIC Educational Resources Information Center

    Bragg, Debra D.; Kirby, Catherine; Zhu, Rongchun

    2006-01-01

    This report is the summary of key aspects of Tech Prep in Illinois over the five year period of 2001-2005 during which all Tech Prep consortia provided annual data based on federal legislative requirements and state-determined essential elements of successful programs. These annual Tech Prep reports enable local educators to monitor student…

  8. Museum in a School (reaching the unreachable audience). Final report, February 2, 1993--December 14, 1995

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Diaz, O.

    SciTech, an interactive science and technology center located 45 miles west of Chicago, is dedicated to providing hands-on and minds-on experiences that explore the spectrum of science and mathematics. SciTech opened at its present location during the summer of 1990 in Aurora, a changing community with a large minority population. Since then, SciTech has received over 331,000 visitors from the entire Chicago metropolitan area. There are now more than 250 exhibits housed in the museum. SciTech has grown quickly in part due to the strong volunteer support from the research and development corridor population it serves, as well as throughmore » international ties. SciTech has become known as an innovative force in the science museum community for its original exhibits and unique youth and school programs. SciTech`s traveling outreach program, ``Museum in a School,`` has served over 391 public and private schools in 111 districts in the Chicago metropolitan area, and has reached over 3,099 teachers and 98,837 students throughout its history. This program serves a wide variety of students, including bilingual, economically depressed, and learning impaired. SciTech is concerned with every American`s need for increasing basic science literacy.« less

  9. Economic Analysis Model Evaluation for Technology Modernization Programs.

    DTIC Science & Technology

    1983-09-01

    program and ’ expost - facto ’ utilized the ASD model to evaluate the accuracy of the ASD model. The following chapter reviews the literature on Tech Mod and...was applied to the CAR 80 Tech Mod project ’ expost - facto ’ in order to develop an ASD model estimated rate o . return. The ASD model was applied in...ASD estimate to achieve a range for the actual IRR. The ASD model was applied expost - facto to the CAR 80 Tech Mod program to derive an IRR. Initial data

  10. Motorcycle crash causes and outcomes: pilot study : traffic tech.

    DOT National Transportation Integrated Search

    2010-08-01

    The number of motorcyclist crash-related fatalities has more than doubled during the past 10 years. In the Safe, Accountable, Flexible, Efficient Transportation Equity Act: A Legacy for Users (SAFETEA-LU), Congress directed the Secretary of Transport...

  11. Impact of newer self-monitoring technology and brief phone-based intervention on weight loss: A randomized pilot study.

    PubMed

    Ross, Kathryn M; Wing, Rena R

    2016-08-01

    Despite the proliferation of newer self-monitoring technology (e.g., activity monitors and smartphone apps), their impact on weight loss outside of structured in-person behavioral intervention is unknown. A randomized, controlled pilot study was conducted to examine efficacy of self-monitoring technology, with and without phone-based intervention, on 6-month weight loss in adults with overweight and obesity. Eighty participants were randomized to receive standard self-monitoring tools (ST, n = 26), technology-based self-monitoring tools (TECH, n = 27), or technology-based tools combined with phone-based intervention (TECH + PHONE, n = 27). All participants attended one introductory weight loss session and completed assessments at baseline, 3 months, and 6 months. Weight loss from baseline to 6 months differed significantly between groups P = 0.042; there was a trend for TECH + PHONE (-6.4 ± 1.2 kg) to lose more weight than ST (-1.3 ± 1.2 kg); weight loss in TECH (-4.1 ± 1.4 kg) was between ST and TECH + PHONE. Fewer ST (15%) achieved ≥5% weight losses compared with TECH and TECH + PHONE (44%), P = 0.039. Adherence to self-monitoring caloric intake was higher in TECH + PHONE than TECH or ST, Ps < 0.05. These results suggest use of newer self-monitoring technology plus brief phone-based intervention improves adherence and weight loss compared with traditional self-monitoring tools. Further research should determine cost-effectiveness of adding phone-based intervention when providing self-monitoring technology. © 2016 The Obesity Society.

  12. Implementing a Project-Based Technology Program for High School Women.

    ERIC Educational Resources Information Center

    Boudria, Theodore J.

    2002-01-01

    Describes the successful implementation of a Women in Technology (WIT) Project-Based Learning Program in High Tech Manufacturing by the Tech Prep Consortium at Bristol Community College (Massachusetts). Reports that the program's success was mainly due to the establishment of partnerships with industry, government, and education, including area…

  13. Pilot Trial of a Disclosure Intervention for HIV+ Mothers: The TRACK Program

    ERIC Educational Resources Information Center

    Murphy, Debra A.; Armistead, Lisa; Marelich, William D.; Payne, Diana L.; Herbeck, Diane M.

    2011-01-01

    Objective: The "T"eaching, "R"aising, "A"nd "C"ommunicating with "K"ids (TRACK) program was a longitudinal pilot-trial intervention designed to assist mothers living with HIV (MLHs) to disclose their serostatus to their young children (age 6-12 years). Method: MLH and child dyads (N = 80 dyads) were recruited and randomized to intervention or…

  14. HgCdTe Surface and Defect Study Program.

    DTIC Science & Technology

    1983-07-01

    RESkSTIVITY. Rm T 10 12 10> 9 i0 1 0 9 I i i i i TI/Au TI AI/Ni Ti/Ni In GATE METAL Figure 8. The Effect of Gate " fetal Type on dc Resistivity of 1500.4...2. J.A. Wilson, V.A. Cotton, J.A. Silkerman, 0. Lacer , W.E. Spicer and P. Morgen, J. Vac. Sci. Tech., Al (1983), 1719. 3. B.K. Janorsek, R.C

  15. Using a Mixed Model to Evaluate Job Satisfaction in High-Tech Industries.

    PubMed

    Tsai, Sang-Bing; Huang, Chih-Yao; Wang, Cheng-Kuang; Chen, Quan; Pan, Jingzhou; Wang, Ge; Wang, Jingan; Chin, Ta-Chia; Chang, Li-Chung

    2016-01-01

    R&D professionals are the impetus behind technological innovation, and their competitiveness and capability drive the growth of a company. However, high-tech industries have a chronic shortage of such indispensable professionals. Accordingly, reducing R&D personnel turnover has become a major human resource management challenge facing innovative companies. This study combined importance-performance analysis (IPA) with the decision-making trial and evaluation laboratory (DEMATEL) method to propose an IPA-DEMATEL model. Establishing this model involved three steps. First, an IPA was conducted to measure the importance of and satisfaction gained from job satisfaction criteria. Second, the DEMATEL method was used to determine the causal relationships of and interactive influence among the criteria. Third, a criteria model was constructed to evaluate job satisfaction of high-tech R&D personnel. On the basis of the findings, managerial suggestions are proposed.

  16. Exploring Astrobiology: Future and In-Service Teacher Research Experiences

    NASA Astrophysics Data System (ADS)

    Cola, J.; Williams, L. D.; Snell, T.; Gaucher, E.; Harris, B.; Usselman, M. C.; Millman, R. S.

    2009-12-01

    The Georgia Tech Center for Ribosome Adaptation and Evolution, a center funded by the NASA Astrobiology Institute, developed an educational Astrobiology program titled, “Life on the Edge: Astrobiology.” The purpose of the program was to provide educators with the materials, exposure, and skills necessary to prepare our future workforce and to foster student interest in scientific discovery on Earth and throughout the universe. A one-week, non-residential summer enrichment program for high school students was conducted and tested by two high school educators, an undergraduate student, and faculty in the Schools of Biology, and Chemistry and Biochemistry at Georgia Tech. In an effort to promote and encourage entry into teaching careers, Georgia Tech paired in-service teachers in the Georgia Intern-Fellowship for Teachers (GIFT) program with an undergraduate student interested in becoming a teacher through the Tech to Teaching program. The GIFT and Tech to Teaching fellows investigated extremophiles which have adapted to life under extreme environmental conditions. As a result, extremophiles became the focus of a week-long, “Life on the Edge: Astrobiology” curriculum aligned with the Georgia Performance Standards in Biology. Twenty-five high school students explored the adaptation and survival rates for various types of extremophiles exposed to UV radiation and desiccation; students were also introduced to hands-on activities and techniques such as genomic DNA purification, gel electrophoresis, and Polymerase Chain Reaction (PCR). The impact on everyone invested and involved in the Astrobiology program including the GIFT and Tech to Teaching fellows, high school students, and faculty are discussed.

  17. NASA Leads Demo for Drone Traffic Management Tech

    NASA Image and Video Library

    2017-06-30

    During the latest NASA-led demonstrations of technologies that could be part of an automated traffic management system for drones, pilots sent their vehicles beyond visual line-of-sight in simulated infrastructure inspections, search and rescue support, and package delivery.

  18. Iowa's bridge and highway climate change and extreme weather vulnerability assessment pilot : [tech transfer summary].

    DOT National Transportation Integrated Search

    2015-03-01

    An interactive and proactive process is desired to collect, monitor, : predict, and evaluate performance of existing Iowa highway : structures and roadway embankments during flood inundation, to : assist in proactively mitigating these events, and to...

  19. TechNovation Lecture Series

    NASA Image and Video Library

    2011-02-17

    Karim R. Lakhani, assistant professor at Harvard Business School, kicked off the Office of the Chief Technologist TechNovation Lecture series with his talk "Accessing the Ideas Cloud" on Thursday, Feb. 17, 2011 at NASA Headquarters in Washington. Photo Credit: (NASA/Carla Cioffi)

  20. "What I Did over My Summer Vacation..."

    ERIC Educational Resources Information Center

    Techniques: Making Education and Career Connections, 1997

    1997-01-01

    A tech prep summer camp was designed to give ninth graders a taste of tech prep before they were asked to choose a high school path. Parents were invited to dinner to learn about tech prep programs and their potential for successful careers. (JOW)

  1. A pilot study of an online workplace nutrition program: the value of participant input in program development.

    PubMed

    Cousineau, Tara; Houle, Brian; Bromberg, Jonas; Fernandez, Kathrine C; Kling, Whitney C

    2008-01-01

    Tailored nutrition Web programs constitute an emerging trend in obesity prevention. Initial investment in innovative technology necessitates that the target population be well understood. This pilot study's purpose was to determine the feasibility of a workplace nutrition Web program. Formative research was conducted with gaming industry employees and benefits managers to develop a consensus on workplace-specific nutrition needs. A demonstration Web program was piloted with stakeholders to determine feasibility. Indiana, Mississippi, Nevada, and New Jersey gaming establishments. 86 employees, 18 benefits managers. Prototype Web program. Concept mapping; 16-item nutrition knowledge test; satisfaction. Concept mapping was used to aggregate importance ratings on programmatic content, which informed Web program curriculum. Chi-square tests were performed postintervention to determine knowledge improvement. (1) Employees and benefits managers exhibited moderate agreement about content priorities for the program (r = 0.48). (2) There was a significant increase in employees' nutrition knowledge scores postintervention (t = 7.16, df = 36, P < .001); those with less knowledge exhibited the greatest gains in knowledge scores (r = -0.647, P < .001). Employees and benefit managers do not necessarily agree on the priority of nutrition-related content, suggesting a need for programs to appeal to various stakeholders. Computer-based approaches can address various stakeholder health concerns via tailored, customized programming.

  2. Teacher Development Program for ATP 2000. Project Report.

    ERIC Educational Resources Information Center

    Sutphin, Dean; And Others

    Agri Tech Prep 2000 (ATP 2000) is a 4-year tech prep program linking high school and postsecondary curricula designed to prepare New York students for careers in agriculture or acceptance into a college program in agriculture. Because teacher development was designated an integral project component for fiscal year 1991-1992, a weeklong teacher…

  3. Tech Prep Program in Financial Services. Final Report.

    ERIC Educational Resources Information Center

    Chicago Public Schools, IL.

    A tech prep program in financial services, called Chicago Academy of Finance, was developed at Jones Metropolitan High School of Business and Commerce in Chicago, Illinois. The program was designed to integrate vocational and academic skills, with an emphasis on critical thinking skills. Of the 39 students initially enrolling in the first…

  4. GT | Government & Community Relations | Georgia Institute of Technology |

    Science.gov Websites

    Atlanta, GA Skip to content Georgia Tech Georgia Institute of Technology Government & Georgia Tech's Impact State Relations Capitol Jackets Advocacy Network Legislative Priorities & ; Resources Georgia Legislative Internship Program Georgia Tech's Impact 2018 PHELAP Conference Community &

  5. Pilot testing of SHRP 2 reliability data and analytical products: Minnesota.

    DOT National Transportation Integrated Search

    2015-01-01

    The Minnesota pilot site has undertaken an effort to test data and analytical tools developed through the Strategic Highway Research Program (SHRP) 2 Reliability focus area. The purpose of these tools is to facilitate the improvement of travel time r...

  6. Implementation of a pilot continuous monitoring system : Iowa Falls Arch Bridge : [tech transfer summary].

    DOT National Transportation Integrated Search

    2015-06-01

    As part of designing, constructing, and maintaining the bridge infrastructure in : Iowa, the Iowa Department of Transportation (DOT) has, in recent years, focused : efforts on investigating the use of new high-performance materials, new design : conc...

  7. Using a Mixed Model to Evaluate Job Satisfaction in High-Tech Industries

    PubMed Central

    Tsai, Sang-Bing; Huang, Chih-Yao; Wang, Cheng-Kuang; Chen, Quan; Pan, Jingzhou; Wang, Ge; Wang, Jingan; Chin, Ta-Chia; Chang, Li-Chung

    2016-01-01

    R&D professionals are the impetus behind technological innovation, and their competitiveness and capability drive the growth of a company. However, high-tech industries have a chronic shortage of such indispensable professionals. Accordingly, reducing R&D personnel turnover has become a major human resource management challenge facing innovative companies. This study combined importance–performance analysis (IPA) with the decision-making trial and evaluation laboratory (DEMATEL) method to propose an IPA–DEMATEL model. Establishing this model involved three steps. First, an IPA was conducted to measure the importance of and satisfaction gained from job satisfaction criteria. Second, the DEMATEL method was used to determine the causal relationships of and interactive influence among the criteria. Third, a criteria model was constructed to evaluate job satisfaction of high-tech R&D personnel. On the basis of the findings, managerial suggestions are proposed. PMID:27139697

  8. Center for Alternative Fuels Research Program | College of Engineering &

    Science.gov Websites

    Applied Science A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW Visit Apply Give to UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

  9. Forging Industry Leadtimes: An Analysis of Causes for and Solutions to Long Leadtimes for Aerospace Forgings

    DTIC Science & Technology

    1986-09-01

    Pamplet . Forging Industry Association, Cleveland-MT, uncatea. 20. Forging Industry Association, and American Society for Metals. Forging Handbook, edited... Pamplet . The Harris-Thomas Drop Forge Compnyayto--n R, undated. 43. Theeck, Michael F., TECH MOD Program Mana.er. Personal interview. Industrial Base... Brochure . Worcester MA, 3, . 125 "’ VITA Captain Stephen F. O’Neill was born on 19 June 1957 in Pittsfield, Massachusetts. He graduated from high school

  10. Project DATA-TECH. 1990-91 Final Evaluation Profile. OREA Report.

    ERIC Educational Resources Information Center

    New York City Board of Education, Brooklyn, NY. Office of Research, Evaluation, and Assessment.

    An evaluation was done of New York City Public Schools' Project DATA-TECH, which served limited English proficient high school students interested in computer-aided drafting (CAD) and cosmetology programs. The program served 190 students at Sara J. Hale High School in Brooklyn, of whom 89.5 percent were eligible for the Free Lunch Program and most…

  11. Technical Preparation: Preparing Students for Success. A Position Paper Presented by the Wisconsin Association of Secondary Vocational Administrators 1991-1992.

    ERIC Educational Resources Information Center

    Peterson, Charlene; And Others

    Technical Preparation (Tech Prep) programs include basic skills and competencies to improve students' school-to-work transition. The following elements characterize Tech Prep: designed for grades 9-14, leading to an technical associate degree; parallels college preparatory program; offers technical program of study in business enterprise,…

  12. Cost Reduction Through the Use of Additive Manufacturing (3d Printing) and Collaborative Product Life Cycle Management Technologies to Enhance the Navy’s Maintenance Programs

    DTIC Science & Technology

    2013-09-01

    the order from the DLA; convenes a meeting with tech librarians , engineers, machinists, quality assurance (QA) inspectors, and mechanics to assess...created, begins the in-house process. 3. Research of Technical Drawings The tech librarian reviews the applicable repository for any tech drawings...applicable to Widget A. If none are found, the tech librarian contacts the OEM and other D-Level activities to find out whether the tech drawing is out

  13. Promoting Tech Schools within Your Community

    ERIC Educational Resources Information Center

    Nikirk, Martin

    2010-01-01

    This article describes a number of promotional events and practices that the author's school engages in. The author hopes that his school's experiences will serve as an inspiration and useful model for other "Tech Directions" readers. There are many methods for successfully promoting one's tech program. Two key strategies are: (1) Connect in…

  14. Contextual Learning and Tech Prep Curriculum Integration.

    ERIC Educational Resources Information Center

    Edling, Walter

    Because tech prep has the twin goals of preparing students for entry into postsecondary/continuing education or the work force after high school, tech prep programs require significant modification of conventional curricula and teaching methodologies. Both research and experience have demonstrated that the ability to transfer learning from one…

  15. Tech-Prep Competency Profiles within the Business/Computer Technologies.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document, which is designed for educators throughout Ohio who are involved in planning and/or delivering tech prep programs within the business/computer technologies cluster, discusses and presents tech prep competency profiles (TCPs) for 12 business/computer technology occupations. The first part of the document contains the following:…

  16. Feasibility, Acceptability, and Preliminary Effectiveness of a Peer-Delivered and Technology Supported Self-Management Intervention for Older Adults with Serious Mental Illness.

    PubMed

    Fortuna, Karen L; DiMilia, Peter R; Lohman, Matthew C; Bruce, Martha L; Zubritsky, Cynthia D; Halaby, Mitch R; Walker, Robert M; Brooks, Jessica M; Bartels, Stephen J

    2018-06-01

    To assess the feasibility, acceptability, and preliminary effectiveness of a peer-delivered and technology supported integrated medical and psychiatric self-management intervention for older adults with serious mental illness. Ten older adults with serious mental illness (i.e., schizophrenia, schizoaffective disorder, bipolar disorder, or major depressive disorder) and medical comorbidity (i.e., cardiovascular disease, obesity, diabetes, chronic obstructive pulmonary disease, hypertension, and/or high cholesterol) aged 60 years and older received the PeerTECH intervention in their homes. Three certified peer specialists were trained to deliver PeerTECH. Data were collected at baseline, one-month, and three-month. The pilot study demonstrated that a three-month, peer-delivered and technology-supported integrated medical and psychiatric self-management intervention ("PeerTECH") was experienced by peer specialists and participants as feasible and acceptable. PeerTECH was associated with statistically significant improvements in psychiatric self-management. In addition, pre/post, non-statistically significant improvements were observed in self-efficacy for managing chronic health conditions, hope, quality of life, medical self-management skills, and empowerment. This pre/post pilot study demonstrated it is possible to train peers to use technology to deliver an integrated psychiatric and medical self-management intervention in a home-based setting to older adults with serious mental illness with fidelity. These findings provide preliminary evidence that a peer-delivered and technology-supported intervention designed to improve medical and psychiatric self-management is feasible, acceptable, and is potentially associated with improvements in psychiatric self-management, self-efficacy for managing chronic health conditions, hope, quality of life, medical self-management skills, and empowerment with older adults with serious mental illness and chronic health conditions.

  17. Chemical Technology Division: Progress report, January 1, 1987--June 30, 1988

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1989-02-01

    This progress report summarizes the research and development efforts conducted in the Chemical Technology Division (Chem Tech) during the period January 1, 1987, to June 30, 1988. The following major areas are covered: waste management and environmental programs, radiochemical and reactor engineering programs, basic science and technology, Nuclear Regulatory Commission programs, and administrative resources and facilities. The Administrative Summary, an appendix, presents a comprehensive listing of publications, oral presentations, awards and recognitions, and patents of Chem Tech staff members during this period. A staffing level and financial summary and lists of seminars and Chem Tech consultants for the period aremore » also included.« less

  18. On-Demand Lectures Create an Effective Distributed Education Experience

    ERIC Educational Resources Information Center

    Lindsey, Stanley D.

    2003-01-01

    In this article, the author shares his experience teaching senior-level structural engineering courses at the Georgia Institute of Technology's Georgia Tech Regional Engineering Program. The program is a unique partnership of four universities--Georgia Tech, Savannah State University, Armstrong Atlantic State University, and Georgia Southern…

  19. Imperium/Lanzatech Syngas Fermentation Project - Biomass Gasification and Syngas Conditioning for Fermentation Evaluation: Cooperative Research and Development Final Report, CRADA Number CRD-12-474

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wilcox, E.

    2014-09-01

    LanzaTech and NREL will investigate the integration between biomass gasification and LanzaTech's proprietary gas fermentation process to produce ethanol and 2,3-butanediol. Using three feed materials (woody biomass, agricultural residue and herbaceous grass) NREL will produce syngas via steam indirect gasification and syngas conditioning over a range of process relevant operating conditions. The gasification temperature, steam-to-biomass ratio of the biomass feed into the gasifier, and several levels of syngas conditioning (based on temperature) will be varied to produce multiple syngas streams that will be fed directly to 10 liter seed fermenters operating with the Lanzatech organism. The NREL gasification system willmore » then be integrated with LanzaTech's laboratory pilot unit to produce large-scale samples of ethanol and 2,3-butanediol for conversion to fuels and chemicals.« less

  20. The PRO-TECH Program. A Program for Gifted and Talented High School Students in Connecticut's Vocational-Technical School System.

    ERIC Educational Resources Information Center

    Brann, Ronald E.

    This document describes Connecticut's PRO-TECH Program, which is designed to link pupils in vocational-technical schools, resources of school and community, and opportunity for growth in order to teach advanced skills, explore new interests, challenge old ideas, and highlight individual talents. The document consists of sections on the following…

  1. The First Bachelor of Science Degree in Wind Energy in the US at Texas Tech University Authors: A. Ruiz Columbié, K. Rozsavolgyi, P. Hughes, D. Farris, A. Swift, R. Walker and M. Baker

    NASA Astrophysics Data System (ADS)

    Ruiz-Columbie, A.

    2010-12-01

    This paper presents a new Bachelor of Science Degree in Wind Energy proposal at Texas Tech University (TTU) beginning the spring 2011. It is designed to prepare the students for admission into a graduate program in wind energy, and/or employment as a professional in wind energy. The program integrates the environmental, social, economic, ethical, technical, scientific principles and practical skills the graduates will need in order to success as professionals in their field of expertise. This degree will provide a multidisciplinary education in the wind energy field through the study of subjects as wind meteorology, wind power generation, wind resource assessment, sustainable energy systems, utility systems operations, and fiscal and operational oversight. Students will be prepared to contribute in areas that include planning, development, operations, analysis and supervision of wind energy systems and projects, as well as to continue in graduate studies. Following the Texas Tech Uniform Undergraduate Degree Requirement Act, the major in Wind Energy will include 47 hours of general education courses from the TTU academic core, 18 hours of junior/senior level electives, and 55 hours of coursework in wind energy topics. A minor of 18 hours is also provided at TTU for those students with a different major who might decide to get a higher education in wind energy.

  2. A Pilot Study of an Online Workplace Nutrition Program: The Value of Participant Input in Program Development

    PubMed Central

    Cousineau, Tara; Houle, Brian; Bromberg, Jonas; Fernandez, Kathrine C.; Kling, Whitney C.

    2008-01-01

    Objective Tailored nutrition Web programs constitute an emerging trend in obesity prevention. Initial investment in innovative technology necessitates that the target population be well understood. This pilot study’s purpose was to determine the feasibility of a workplace nutrition Web program. Design Formative research was conducted with gaming industry employees and benefits managers to develop a consensus on workplace-specific nutrition needs. A demonstration Web program was piloted with stakeholders to determine feasibility. Setting Indiana, Mississippi, Nevada, and New Jersey gaming establishments. Participants 86 employees, 18 benefits managers. Intervention Prototype Web program. Main Outcome Measures Concept mapping; 16-item nutrition knowledge test; satisfaction. Analysis Concept mapping was used to aggregate importance ratings on programmatic content, which informed Web program curriculum. Chi-square tests were performed postintervention to determine knowledge improvement. Results (1) Employees and benefits managers exhibited moderate agreement about content priorities for the program (r = 0.48). (2) There was a significant increase in employees’ nutrition knowledge scores postintervention (t = 7.16, df = 36, P < .001); those with less knowledge exhibited the greatest gains in knowledge scores (r = −0.647, P < .001). Conclusions and Implications Employees and benefit managers do not necessarily agree on the priority of nutrition-related content, suggesting a need for programs to appeal to various stakeholders. Computer-based approaches can address various stakeholder health concerns via tailored, customized programming. PMID:18457784

  3. The Boeing Company's Manufacturing Technology Student Internship. Evaluation Report.

    ERIC Educational Resources Information Center

    Owens, Thomas R.

    The Boeing Company contracted with the Northwest Regional Educational Laboratory to evaluate its student internship program, part of a "school-to-work" effort modeled after the nationally recognized Tech Prep initiative. The company's involvement in the Tech Prep Program has been implemented in three phases: (1) the initial phase helped…

  4. Curriculum Designs for Tech Prep Clusters. PACE '94.

    ERIC Educational Resources Information Center

    Schoon, Kenneth J., Ed.; Wiles, Clyde A., Ed.

    This booklet contains descriptions of various Tech Prep programs developed by PACE (Promoting Academic Excellence In Mathematics, Science & Technology for Workers of the 21st Century). Each entry includes general program descriptions, curriculum outlines, and course descriptions. The clusters and their specialty areas described in the booklet are:…

  5. Building Career Tech Programs into Career Academies

    ERIC Educational Resources Information Center

    Delano, Rick; Mittelsteadt, Sandy

    2005-01-01

    In Manatee County, Florida, not only did they build career tech programs into career academies, but they also developed an evaluation process to ensure these career academies were credible. A District Academic team created the "Documentation of Academy Assessment Criteria" with 12 core components and a rubric that helps evaluators…

  6. Case Study of a Service-Learning Partnership: Montana Tech and the Montana State Prison.

    ERIC Educational Resources Information Center

    Amtmann, John; Evans, Roberta; Powers, Jack

    2002-01-01

    As a service learning project, Montana Tech students deliver a wellness program for older inmates in Montana State Prison. Outcomes identified in student interviews included improved interpersonal skills (tact, diplomacy, communication, assertiveness) and opportunities to apply knowledge. Students recognized the value of the program for…

  7. Pilot project - demonstration of capabilities and benefits of bridge load rating through physical testing : tech transfer summary.

    DOT National Transportation Integrated Search

    2013-08-01

    This project demonstrated the capabilities for load testing bridges in Iowa, developed and presented a webinar to local and state engineers, and produced a spreadsheet and benefit evaluation matrix that others can use to preliminarily assess where br...

  8. Pilot project for a hybrid road-flooding forecasting system on Squaw Creek : [tech transfer summary].

    DOT National Transportation Integrated Search

    2014-10-01

    According to the National Weather Service, more than : half of the fatalities attributed to flash floods are : people swept away in vehicles when trying to cross an : intersection that is flooded. Efforts are underway to : improve prediction of the l...

  9. School-to-Work Apprenticeship. Project Manual 1993-1995.

    ERIC Educational Resources Information Center

    Lee Coll., Baytown, TX.

    With 1993-94 and 1994-95 Perkins tech prep funds, Lee College, in cooperation with a consortium and local schools, planned, developed, and validated a school-to-work apprenticeship model for tech prep programs. The other educational partners were the Gulf Coast Tech Prep Consortium and nine high schools in eight area school districts. The…

  10. Building 21st Century Schools: Designing Smarter, Sleeker High-Tech Facilities.

    ERIC Educational Resources Information Center

    Cutshall, Sandy

    2003-01-01

    The demand for high-tech programs in tandem with traditional classes challenges school districts to provide flexible facilities for career and technical education. Some districts partner with local businesses to develop state-of-the art facilities and deal with costs, upkeep, and upgrading. Some high-tech educational facilities are themselves…

  11. Soft Soil Tire Model Development and Experimental Testing

    DTIC Science & Technology

    2012-09-01

    Sandu 1 , Mr. Eduardo Pinto 2 , Mr. Scott Naranjo 3 , Dr. Paramsothy Jayakumar 4 , Dr. Brant Ross 5 1Virginia Tech, 2Virginia Tech, 3Virginia Tech...W56HZV-04-2-0001 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Corina Sandu; Eduardo Pinto; Scott Naranjo; Paramsothy Jayakumar ; Brant Ross

  12. Evaluation and Repair of Concrete Structures: Annotated Bibliography 1978 - 1988. Volume 1. (Repair, Evaluation, Maintenance and Rehabilitation Research Program)

    DTIC Science & Technology

    1991-06-01

    32303, "Application of New Technology to Maintenance and Minor Repair," for which Mr. James E. McDonald (CEWES-SC-R) was Principal Investigator. Dr. Tony...materials, shotcrete, and silica-fume concrete. 6. Section -D contains 710 references-on maintenance and repair tech- niques including bonding new concrote to...sys- -tem. The process problems have been resolved-by introduction of new instrumentation, static mixers, elimination of washers and high density

  13. Sustained Load Crack Growth in Inconel 718 Under Non-Isothermal Conditions.

    DTIC Science & Technology

    1983-12-01

    AD- R136 925 SUSTINED LOAD CRCK GROWTH IN INCONEL 7±8 UNDER / NON-ISOTHERM L ONDITIONS(U) IR FORCE INST OF TECH WRIGHT-PATTERSON AFB OH SCHOOL OF...thermocouples. This unit provides pre-programmed independent control of the four heat- Iing lamps. It also turns the cooling system on and off at the appropri...relationship between them. The microcomputer controls temperature as a function of time. The system is capable of heating and cooling a specimen at a rate of 8C

  14. Argonne National Laboratory's Recycling Pilot Plant

    ScienceCinema

    Spangenberger, Jeff; Jody, Sam

    2018-05-30

    Argonne has a Recycling Pilot Plant designed to save the non-metal portions of junked cars. Here, program managers demonstrate how plastic shredder residue can be recycled. (Currently these automotive leftovers are sent to landfills. For more information, visit Argonne's Transportation Technology R&D Center Web site at http://www.transportation.anl.gov.

  15. Saturn Apollo Program

    NASA Image and Video Library

    1968-06-03

    Pictured left to right, in the Apollo 7 Crew Portrait, are astronauts R. Walter Cunningham, Lunar Module pilot; Walter M. Schirra, Jr., commander; and Donn F. Eisele, Command Module Pilot. The Apollo 7 mission, boosted by a Saturn IB launch vehicle on October 11, 1968, was the first manned flight of the Apollo spacecraft.

  16. Index to 1982 NASA Tech Briefs, volume 7, numbers 1-4

    NASA Technical Reports Server (NTRS)

    1986-01-01

    Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1982 Tech Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences.

  17. Index to 1984 NASA Tech Briefs, volume 9, numbers 1-4

    NASA Technical Reports Server (NTRS)

    1987-01-01

    Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1984 Tech B Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences.

  18. Index to 1981 NASA Tech Briefs, volume 6, numbers 1-4

    NASA Technical Reports Server (NTRS)

    1986-01-01

    Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1981 Tech Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences.

  19. Index to 1983 NASA Tech Briefs, volume 8, numbers 1-4

    NASA Technical Reports Server (NTRS)

    1986-01-01

    Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1983 Tech Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences.

  20. Index to 1985 NASA Tech Briefs, volume 10, numbers 1-4

    NASA Technical Reports Server (NTRS)

    1987-01-01

    Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1985 Tech Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences.

  1. Problems and Countermeasures of Zhejiang High-Tech Enterprises Industry-University-Institute Cooperation in China

    NASA Astrophysics Data System (ADS)

    Zhou, Qing; Mao, Chong-Feng; Hou, Lin

    Industry-university-institute cooperation is an important means to accelerate technical development and achievements for high-tech enterprises. Considering that Zhejiang high-tech enterprises existed some problems which included low cooperative level, single distribution, weak secondary R&D ability, obvious risk and so on, government should play an guiding role on improving information service system, enhancing cooperative level, promoting scientific intermediary service organization system construction, and building better environment for Industry-university-institute cooperation.

  2. Index to 1986 NASA Tech Briefs, volume 11, numbers 1-4

    NASA Technical Reports Server (NTRS)

    1987-01-01

    Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1986 Tech Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences.

  3. SciTech Clubs for Girls. [Final report], September 1, 1991--April 30, 1994

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Malamud, E.; Diaz, O.; Cox, J.

    1994-12-31

    The program of SciTech Clubs for Girls and its progress are described. This is a program that promotes the learning of science and mathematics by girls in the age range of 9 to 13 years through the process of building exhibits and learning from local professionals. A list of exhibits and a critique of the program are given.

  4. Standard/Handbook for Multipactor Breakdown Prevention in Spacecraft Components

    DTIC Science & Technology

    2014-05-28

    Axley, Transient-mode Multipactor Discharge, Phys. Plasmas, 2009, 16, n. 8, pp. 083502-1 – 083502-7. 11. D. Woode and J. Petit. ESTEC Working Paper 1556...Bearings Scot Lichty scot.r.lichty@lmco.com Lockheed Martin Sultan Ali Lilani sultan.lilani@integra- tech.com Integra - Tech Josh Lindley

  5. Virginia Water Resources Research Center - at Virginia Tech since 1965

    Science.gov Websites

    Virginia Water Resources Research Center at Virginia Tech since 1965 Search for: Search Skip to collaborative research, extension, and education programs to develop solutions to water resource challenges. We Monitoring Council Conference: March 21, 2018 The Virginia Water Resources Research Center at Virginia Tech

  6. Igniting the Spark: Tech Trek STEM Camps for Girls. Summary of Survey Findings

    ERIC Educational Resources Information Center

    American Association of University Women, 2014

    2014-01-01

    Tech Trek opens up STEM possibilities for girls in many contexts. It expands and influences their academic and social lives, starting in middle school and continuing on into their careers. The program seeks out talented girls, sparks their interest, illuminates the value of a college education, and validates their passions. Tech Trek's exciting,…

  7. Connecting Teachers and Ed-Tech Developers: Lessons from NYC's "Gap App" Program. Report

    ERIC Educational Resources Information Center

    Villavicencio, Adriana; Siman, Nina; Lafayette, Camille; Kang, David

    2016-01-01

    In 2011, with support from a federal Investing in Innovation grant, the NYC Department of Education launched Innovate NYC Schools. The initiative was designed to address two, related challenges to effectively integrating education technology (ed-tech) into classrooms: First, procurement of ed-tech tools is often hampered by a disconnect between…

  8. Connecting Teachers and Ed-Tech Developers: Lessons from NYC's "Gap App" Program. Technical Appendices

    ERIC Educational Resources Information Center

    Villavicencio, Adriana; Siman, Nina; Lafayette, Camille; Kang, David

    2016-01-01

    In 2011, with support from a federal Investing in Innovation grant, the NYC Department of Education launched Innovate NYC Schools. The initiative was designed to address two, related challenges to effectively integrating education technology (ed-tech) into classrooms: First, procurement of ed-tech tools is often hampered by a disconnect between…

  9. Reformulating General Engineering and Biological Systems Engineering Programs at Virginia Tech

    ERIC Educational Resources Information Center

    Lohani, Vinod K.; Wolfe, Mary Leigh; Wildman, Terry; Mallikarjunan, Kumar; Connor, Jeffrey

    2011-01-01

    In 2004, a group of engineering and education faculty at Virginia Tech received a major curriculum reform and engineering education research grant under the department-level reform (DLR) program of the NSF. This DLR project laid the foundation of sponsored research in engineering education in the Department of Engineering Education. The DLR…

  10. From High School to College to Work: Students with Disabilities in High Tech Fields.

    ERIC Educational Resources Information Center

    Burgstahler, Sheryl; Wild, Nellie; Smallman, Julie

    This paper describes DO-IT (Disabilities, Opportunities, Internetworking and Technology), a cooperative program of the University of Washington and the High School/High Tech program to increase the career success of individuals with disabilities by providing access to technology, career preparation activities, and work experiences. DO-IT works…

  11. Job Future's Bright for the Chefs of Muskingum Tech.

    ERIC Educational Resources Information Center

    Hoffman, Carl

    1993-01-01

    A two-year culinary arts program at Muskingum College (Zanesville, Ohio) prepares students for jobs in an emerging service-based economy. Students receive intensive classroom instruction and hands-on learning in a high-tech kitchen. Twenty-five full-time and 12 part-time students are completing their first year in the program. (LP)

  12. Bilingual Academic Computer and Technology Oriented Program: Project COM-TECH. Evaluation Section Report. OREA Report.

    ERIC Educational Resources Information Center

    Berney, Tomi D.; Plotkin, Donna

    Project COM-TECH offered bilingual individualized instruction, using an enrichment approach, to Spanish- and Haitian Creole-speaking students with varying levels of English and native language proficiency and academic preparation. The program provided supplementary instruction in English as a Second Language (ESL); Native Language Arts (NLA); and…

  13. Tech Team: Student Technology Assistants in the Elementary & Middle School.

    ERIC Educational Resources Information Center

    Peto, Erica; Onishi, Esther; Irish, Barbara

    A step-by-step manual of worksheets, templates, forms and examples, this comprehensive handbook is designed for librarians, classroom teachers, and technology specialists who are interested in training students to be technology aides. The "Tech Team" program not only systematically outlines how one organizes and manages a support program, but…

  14. Former Addicts Find a Home (and a Scholarship) at Texas Tech.

    ERIC Educational Resources Information Center

    Gose, Ben

    2000-01-01

    Describes a program at Texas Tech University which offers scholarships to 36 recovering drug or alcohol addicts each semester as part of its Center for the Study of Addiction which trains addiction counselors. Notes the special admissions process for these students and their apparent success in the program. (DB)

  15. NASA Remembers Astronaut John Young, Moonwalker and First Shuttle Commander

    NASA Image and Video Library

    2018-01-06

    Astronaut John Young, who walked on the Moon during Apollo 16 and commanded the first space shuttle mission, has passed away at the age of 87. After earning an engineering degree from Georgia Tech and flying planes for the Navy, Young began his impressive career at NASA in 1962, when he was selected from among hundreds of young pilots to join NASA's second astronaut class, known as the "New Nine." Young first flew in space on the first manned Gemini flight, Gemini 3 in March 1965. He later commanded the Gemini 10 mission in July 1966, served as command module pilot on Apollo 10 in 1969, and landed on the Moon as commander of Apollo 16 in April 1972. He went on to command the first Space Shuttle flight in 1981, and also commanded the STS-9 shuttle mission in 1983. He is the only person to go into space as part of the Gemini, Apollo and space shuttle programs and was the first to fly into space six times -- or seven times, when counting his liftoff from the Moon during Apollo 16.

  16. Two Different Maintenance Strategies in the Hospital Environment: Preventive Maintenance for Older Technology Devices and Predictive Maintenance for Newer High-Tech Devices.

    PubMed

    Sezdi, Mana

    2016-01-01

    A maintenance program generated through the consideration of characteristics and failures of medical equipment is an important component of technology management. However, older technology devices and newer high-tech devices cannot be efficiently managed using the same strategies because of their different characteristics. This study aimed to generate a maintenance program comprising two different strategies to increase the efficiency of device management: preventive maintenance for older technology devices and predictive maintenance for newer high-tech devices. For preventive maintenance development, 589 older technology devices were subjected to performance verification and safety testing (PVST). For predictive maintenance development, the manufacturers' recommendations were used for 134 high-tech devices. These strategies were evaluated in terms of device reliability. This study recommends the use of two different maintenance strategies for old and new devices at hospitals in developing countries. Thus, older technology devices that applied only corrective maintenance will be included in maintenance like high-tech devices.

  17. Two Different Maintenance Strategies in the Hospital Environment: Preventive Maintenance for Older Technology Devices and Predictive Maintenance for Newer High-Tech Devices

    PubMed Central

    Sezdi, Mana

    2016-01-01

    A maintenance program generated through the consideration of characteristics and failures of medical equipment is an important component of technology management. However, older technology devices and newer high-tech devices cannot be efficiently managed using the same strategies because of their different characteristics. This study aimed to generate a maintenance program comprising two different strategies to increase the efficiency of device management: preventive maintenance for older technology devices and predictive maintenance for newer high-tech devices. For preventive maintenance development, 589 older technology devices were subjected to performance verification and safety testing (PVST). For predictive maintenance development, the manufacturers' recommendations were used for 134 high-tech devices. These strategies were evaluated in terms of device reliability. This study recommends the use of two different maintenance strategies for old and new devices at hospitals in developing countries. Thus, older technology devices that applied only corrective maintenance will be included in maintenance like high-tech devices. PMID:27195666

  18. The ORNL Chemical Technology Division, 1950-1994

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jolley, R.L.; Genung, R.K.; McNeese, L.E.

    1994-10-01

    This document attempts to reconstruct the role played by the Chemical Technology Division (Chem Tech) of the Oak Ridge National Laboratory (ORNL) in the atomic era since the 1940`s related to the development and production of nuclear weapons and power reactors. Chem Tech`s early contributions were landmark pioneering studies. Unknown and dimly perceived problems like chemical hazards, radioactivity, and criticality had to be dealt with. New chemical concepts and processes had to be developed to test the new theories being developed by physicists. New engineering concepts had to be developed and demonstrated in order to build facilities and equipment thatmore » had never before been attempted. Chem Tech`s role was chemical separations, especially uranium and plutonium, and nuclear fuel reprocessing. With diversification of national and ORNL missions, Chem Tech undertook R&D studies in many areas including biotechnology; clinical and environmental chemistry; nuclear reactors; safety regulations; effective and safe waste management and disposal; computer modeling and informational databases; isotope production; and environmental control. The changing mission of Chem Tech are encapsulated in the evolving activities.« less

  19. A Concept of Constructing a Common Information Space for High Tech Programs Using Information Analytical Systems

    NASA Astrophysics Data System (ADS)

    Zakharova, Alexandra A.; Kolegova, Olga A.; Nekrasova, Maria E.

    2016-04-01

    The paper deals with the issues in program management used for engineering innovative products. The existing project management tools were analyzed. The aim is to develop a decision support system that takes into account the features of program management used for high-tech products: research intensity, a high level of technical risks, unpredictable results due to the impact of various external factors, availability of several implementing agencies. The need for involving experts and using intelligent techniques for information processing is demonstrated. A conceptual model of common information space to support communication between members of the collaboration on high-tech programs has been developed. The structure and objectives of the information analysis system “Geokhod” were formulated with the purpose to implement the conceptual model of common information space in the program “Development and production of new class mining equipment - “Geokhod”.

  20. LASER Tech Briefs, Fall 1994. Volume 2, No. 4

    NASA Technical Reports Server (NTRS)

    1994-01-01

    Topics in this issue of LASER Tech briefs include: Electronic Components and Circuits. Electronic Systems, Physical Sciences, Materials, Computer Programs, Fabrication Technology, Mathematics and Information Sciences, and Life Sciences

  1. ISO 50001 for Commercial Buildings: Lessons Learned From U.S. DOE Pilot Project: Preprint

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Deru, M.; Field, K.; Punjabi, S.

    In the U.S., the ISO 50001 Standard, which establishes energy management systems (EnMSs) and processes, has shown uptake primarily in the industrial sector. The U.S. Department of Energy (DOE) undertook a pilot program to explore ISO 50001 implementation in commercial buildings. Eight organizations participated as pilots, with technical assistance provided by DOE, the National Renewable Energy Laboratory (NREL), the Lawrence Berkeley National Laboratory (LBNL), and the Georgia Institute of Technology (Georgia Tech). This paper shares important lessons learned from the pilot. Staff time was the most critical resource required to establish effective EnMSs in commercial buildings. The pilot also revealedmore » that technical support and template/example materials were essential inputs. Crucial activities included evaluating performance, identifying goals, making connections, communicating operational controls, and tracking/reviewing progress. Benefits realized included enhanced intra-organizational connections, greater energy awareness, increased process efficiencies, and improved ability to make business cases. Incremental benefits for ISO 50001 certification were greater accountability, assurance of best practices, public relations opportunities, and potential to unlock verified savings credits or incentive money. Incremental certification costs included more staff/consultant time, money for certification, and a tendency to limit EnMS scope in order to ensure favorable audit results. Five best practices were identified - utilizing expert technical assistance, training, and other resources; focusing on implementation over documentation; keeping top management involved; considering organizational structure when selecting EnMS scope; and matching the implementation level to an EnMS's scope and scale. The last two practices are particularly relevant to the commercial buildings sector.« less

  2. Report on Virginia Tech Shootings Urges Clarification of Privacy Laws

    ERIC Educational Resources Information Center

    Fischer, Karin

    2007-01-01

    Educators, mental-health officials, and law-enforcement officers often do not share information about troubled students because they are confused by what they can disclose under complex and overlapping privacy laws, according to a report on the Virginia Tech shootings. Attorney General Alberto R. Gonzales and two other Bush cabinet secretaries…

  3. The Tech Prep Handbook: Essential Documents To Promte Effective Tech Prep Policies and Practices.

    ERIC Educational Resources Information Center

    Hensley, Oliver D., Ed.; And Others

    Developed during a project to document and analyze the tech prep initiative in Texas, this handbook contains exemplary documents associated with the model programs in the state. This second edition of the handbook organizes documents in sections (sections A, C, D, and G) that correspond to the major impact sectors identified during the research…

  4. ECO TECH LINK: PT3 Grant Builds Technology Circles in the K-18 Community.

    ERIC Educational Resources Information Center

    Klinger, Katie; Duckett, Jane; Medrano, Maria; Crow, Nedra; Stowers, Gwen

    Through the vehicle of the PT3 grant program, ECO TECH LINK has built a strong consortium to support technology circles of government, education and business in order to raise student achievement scores, shorten the time it takes to earn a teaching credential, and enhance the quality of teacher credential courses. The ECO TECH LINK grant enables…

  5. Another Innovation from High Tech High--Embedded Teacher Training

    ERIC Educational Resources Information Center

    Griswold, Janie; Riordan, Rob

    2016-01-01

    High Tech High School's teaching internship program blends on-the-job work with classroom theory. Interns spend two years working as full teachers as they take courses. The program serves three large purposes: Train new teachers and build capacity in the HTH organization; train teachers in and beyond HTH for success in a wide range of contexts;…

  6. They're Taking Requests: Student Techs Command the Help Desk

    ERIC Educational Resources Information Center

    Demski, Jennifer

    2010-01-01

    The new faces on the help desk are younger, work for cheap, and may be the tech savviest in the building. This article describes how two IT training programs are teaching students valuable technology skills while providing schools with a much-needed lift to their troubleshooting teams. The programs--Generation YES and Mouse Squad--put students at…

  7. Career Assessment: Interest and Values Measures for Tech Prep and School-to-Work Programs.

    ERIC Educational Resources Information Center

    Kapes, Jerome T.; Martinez, Linda

    This paper describes and compares interests and values measures useful for career assessment and counseling in tech prep and school-to-work programs. The primary source of information for this information is the third edition of "A Counselor's Guide to Career Assessment Instruments" (Kapes, Mastie, and Whitfield 1994). Stated objectives…

  8. Bilingual Academic Computer and Technology Oriented Program. Project COM-TECH, 1987-1988.

    ERIC Educational Resources Information Center

    Berney, Tomi D.; Plotkin, Donna

    The Bilingual Computer and Technology Oriented Program (COM-TECH) completed the final year of a 3-year funding cycle. The project's primary goal was to provide bilingual individualized instruction, using an enrichment approach, to Spanish- and Haitian Creole/French-speaking students of varying levels of native and English second-language (ESL)…

  9. Educational Innovation in the Design of an Online Nuclear Engineering Curriculum

    ERIC Educational Resources Information Center

    Hall, Simin; Jones, Brett D.; Amelink, Catherine; Hu, Deyu

    2013-01-01

    The purpose of this paper is to describe the development and implementation phases of online graduate nuclear engineering courses that are part of the Graduate Nuclear Engineering Certificate program at Virginia Tech. Virginia Tech restarted its nuclear engineering program in the Fall of 2007 with 60 students, and by 2009, the enrollment had grown…

  10. 34 CFR 406.31 - How does a State carry out the State-Administered Tech-Prep Education Program?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false How does a State carry out the State-Administered Tech-Prep Education Program? 406.31 Section 406.31 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE-ADMINISTERED...

  11. Aphasia vs. Apraxia

    MedlinePlus

    ... tech system – Paper and pencil High-tech system – Computer program that produces voice output at keystroke Oral ... for Aphasia Actions Speak as Loud as Words Computers & Language Rehab From Singing to Speaking When the ...

  12. The Characterization of Grade PCEA Recycle Graphite Pilot Scale Billets

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Burchell, Timothy D; Pappano, Peter J

    2010-10-01

    Here we report the physical properties of a series specimens machined from pilot scale (~ 152 mm diameter x ~305 mm length) grade PCEA recycle billets manufactured by GrafTech. The pilot scale billets were processed with increasing amounts of (unirradiated) graphite (from 20% to 100%) introduced to the formulation with the goal of determining if large fractions of recycle graphite have a deleterious effect on properties. The properties determined include Bulk Density, Electrical Resistivity, Elastic (Young s) Modulus, and Coefficient of Thermal Expansion. Although property variations were observed to be correlated with the recycle fraction, the magnitude of the variationsmore » was noted to be small.« less

  13. Heritage, Image and Identity: The Evolution of USAF Leadership

    DTIC Science & Technology

    2011-02-16

    up-in-coming “ Generation Z ” (also known as the “Net or Digital Generation”), which is the most connected and high-tech generation ever seen. 40...for future RPA warrior leaders. 43 The USAF has already set the ground work to position “ Generation Z ” RPA pilots for future senior leadership

  14. Pilot tests of a seat belt gearshift delay on the belt use of commercial fleet drivers : traffic tech.

    DOT National Transportation Integrated Search

    2010-04-01

    Wearing a seat belt has been shown effective in avoiding : or reducing serious injury due to traffic crashes. While : belt use rates in the United States increased from under : 60% in 1994 to 83% in 2008, a substantial number of drivers : still drive...

  15. GT-SUPREEM: the Georgia Tech summer undergraduate packaging research and engineering experience for minorities

    NASA Astrophysics Data System (ADS)

    May, Gary S.

    1996-07-01

    The Georgia Tech SUmmer Undergraduate Packaging Research and Engineering Experience for Minorities (GT-SUPREEM) is an eight-week summer program designed to attract qualified minority students to pursue graduate degrees in packaging- related disciplines. The program is conducted under the auspices of the Georgia Tech Engineering Research Center in Low-Cost Electronic Packaging, which is sponsored by the National Science Foundation. In this program, nine junior and senior level undergraduate students are selected on a nationwide basis and paired with a faculty advisor to undertake research projects in the Packaging Research CEnter. The students are housed on campus and provided with a $DLR3,000 stipend and a travel allowance. At the conclusion of the program, the students present both oral and written project summaries. It is anticipated that this experience will motivate these students to become applicants for graduate study in ensuring years. This paper will provide an overview of the GT-SUPREEM program, including student research activities, success stories, lessons learned, and overall program outlook.

  16. Project Synopsis for High School/High Tech

    NASA Technical Reports Server (NTRS)

    1997-01-01

    To help increase the diversity of workers at NASA centers it is necessary to provide students with disabilities the opportunities to explore careers in high technology. HIGH SCHOOL/HIGH TECH, an enrichment program, pioneered at Goddard Space Flight Center, successfully introduces students with disabilities to high tech careers. This community-based partnership serves as a model for three additional NASA sites-Ames Research Center, Johnson Space Flight Center, and Lewis Research Center. For a three year period beginning August 15, 1995, provide financial and technical support to a local agency in each NASA center area which serves persons with disabilities to enable a High School/High Tech program to develop and stand alone. Each project will develop a basis of cooperation with Ames, Johnson, and Lewis as well as a variety of community groups including the public schools, high tech employers, post-secondary education and training programs, rehabilitation agencies, and community economic development organizations. Throughout the startup period and thereafter, local youths with disabilities will have early exposure to professions in mathematics, science, and technology-related fields. This exposure will be multifaceted to insure adequate opportunity for realistic career exploration so these youths have an opportunity to test their interests and abilities. The exposure will be presented in the most supportive environment that is feasible.

  17. Psychological and Ethical Considerations Concerning the Debreather and Assisted Suicide: A Commentary on Ogden

    ERIC Educational Resources Information Center

    Kleespies, Phillip M.

    2010-01-01

    This article offers a commentary on the report by Russel Ogden (2010/this issue) on the use of the "debreather" for suicide assistance by the NuTech (or New Technologies for Self-Deliverance) program. The emergence of NuTech is set within its historical and political context. Nu Tech is criticized for its anarchic and extreme advocacy of…

  18. Project Georgia High School/High Tech

    NASA Technical Reports Server (NTRS)

    2000-01-01

    Georgia High School/High Tech has been developing a suggested curriculum for use in its programs. The purpose of this instructional material is to provide a basic curriculum format for teachers of High School/High Tech students. The curriculum is designed to implement QCC classroom instruction that encourages career development in technological fields through post-secondary education, paid summer internships, and exposure to experiences in high technology.

  19. NASA Tech Briefs, March 2002. Volume 26, No. 3

    NASA Technical Reports Server (NTRS)

    2002-01-01

    Topics include: a special section on data acquisition, software, electronic components and systems, materials, computer programs, mechanics, machinery/automation, manufacturing, biomedical, physical sciences, book and reports, and a special section of Photonics Tech Briefs.

  20. Connections: A Compendium of Integration Ideas. Illinois Tech Prep Innovators. 1992 Compendium. Integrative Teaching Ideas from Illinois Teachers.

    ERIC Educational Resources Information Center

    Illinois State Board of Education, Springfield. Dept. of Adult, Vocational and Technical Education.

    This report contains 51 one-page abstracts of innovative Illinois tech prep programs that integrate academic and vocational education. Each abstract includes the following: curriculum areas, grade level, types of students for whom the program is appropriate, materials needed, suggested resources, a contact person with address and telephone number,…

  1. Tech Prep Early Childhood Professions Advanced Specialty Curriculum Guide for Postsecondary Colleges. Part of an Articulated Program for Secondary & Postsecondary Students.

    ERIC Educational Resources Information Center

    Harriman, Marilyn Williams

    The Tech Prep Early Childhood Professions Program is designed to provide high school and community college students in Texas with the necessary training and skills to find employment in the child care and education professions as teachers, directors, or special needs paraprofessionals. This Advanced Speciality Curriculum Guide is designed for…

  2. Long-Term Follow-Up Study of Legal Tech Graduates, 1984-1988. Volume XVIII, No. 5.

    ERIC Educational Resources Information Center

    Lucas, John A.; Hildebrandt, Sharrie

    In order to provide information for the 1989-90 program review at William Rainey Harper College (WRHC) and to fulfill American Bar Association accreditation guidelines, a long-term, follow-up study was conducted of all Legal Tech program alumni who graduated between 1984 and 1988. A telephone survey generated usable responses from 106 (73%) of the…

  3. The Classroom Notetaker: How To Organize a Program Serving Students with Hearing Impairments.

    ERIC Educational Resources Information Center

    Wilson, Jimmie Joan

    This guide describes how to establish a notetaking program to benefit students with hearing impairments in mainstream settings. Chapter 1 discusses the need for notetakers and includes subjects such as providing equal access, high-tech and low-tech notetaking, how the notes can be used, and who can use the notes. Chapter 2 provides information on…

  4. Hydrogen Pumped Iodine Laser Study.

    DTIC Science & Technology

    1980-07-01

    D.W. Naegeli , and i. Glassman, Comb. Sci. Tech.. 8. 231 (1974), 5. L.H. Hall, Appi. Phys. Lett., 27 (6), 335 (1975). 6. R.C. Oldenbor, J.L. Gole, and...4693 �). 3. P. Cadman and J.C. Polanyi, J. Phys. Chem., 72. 3715 (1968). 4. M.L. Zwillengerg, D.W. Naegeli , and 1. Glassman, Comb. Sci. Tech., 8

  5. Marine Physical Laboratory Multi-Disciplinary Ocean Science and Technology Program

    DTIC Science & Technology

    1991-04-01

    ambierit noise were made with the advent of large. of 3800 m. Reflection profiles and drill logs from this hole scale seismome ter arrays." Sensor arrays...Deaion. and S C Webb."A deep-sea differential pressure frequency. The array was too limited in extent to make spa- gauge ." J. Aimos Ocean Tech. 2. 237...75, 847-864 (1985). 2"P. K Spudich andi I A. Orcutt," Petrology and porcisit% of tn oceanic "M E Dougherty and R. A. Stephen."Seismic energy

  6. The Shock and Vibration Digest. Volume 12, Number 2,

    DTIC Science & Technology

    1980-02-01

    Malfunction Diagnosis Key Words: Design techniques, Equipment, Balancing tech- R.C. Eisenmann niques, Alignment Mech. Engrg. Services, North American...260 Edil, T.B ................. 362 Hignett, H.J.............. 379 Castro, G............... 409 Eisenmann , R.C ........... 395 Hill, R.C

  7. Georgia Tech

    Science.gov Websites

    Family Programs Dean of Students Scholarships & Financial Aid Employee, Alumni, & Other Resources Education Georgia Tech Online Academic Calendar Admissions Prospective Students Admissions Overview roots extend worldwide, creating international business connections and giving students unique research

  8. NASA Tech Briefs, July 1995. Volume 19, No. 7

    NASA Technical Reports Server (NTRS)

    1995-01-01

    Topics include: mechanical components, electronic components and circuits, electronic systems, physical sciences, materials, computer programs, mechanics, machinery, manufacturing/fabrication, mathematics and information sciences, book and reports, and a special section of Federal laboratory computing Tech Briefs.

  9. NASA Tech Briefs, June 1995. Volume 19, No. 6

    NASA Technical Reports Server (NTRS)

    1995-01-01

    Topics include: communications technology, electronic components and circuits, electronic systems, physical sciences, materials, computer programs, mechanics, machinery, manufacturing/fabrication, mathematics and information sciences, life sciences, books and reports, a special section of laser Tech Briefs.

  10. NASA Tech Briefs, April 1995. Volume 19, No. 4

    NASA Technical Reports Server (NTRS)

    1995-01-01

    This issue of the NASA Tech Briefs has a special focus section on video and imaging, a feature on the NASA invention of the year, and a resource report on the Dryden Flight Research Center. The issue also contains articles on electronic components and circuits, electronic systems, physical sciences, materials, computer programs, mechanics, machinery, manufacturing/fabrication, mathematics and information sciences and life sciences. In addition to the standard articles in the NASA Tech brief, this contains a supplement entitled "Laser Tech Briefs" which features an article on the National Ignition Facility, and other articles on the use of Lasers.

  11. Models that Link School and Work. From These Projects Could Come New Ways to Teach Job Skills.

    ERIC Educational Resources Information Center

    Vocational Education Journal, 1991

    1991-01-01

    Six pilot worksite-based projects funded by the Department of Labor are described: preparing for metalworking careers in Pennsylvania; Workforce Los Angeles Youth Academy; Boston's Project Protech, preparation for health care careers; Maryland projects for manufacturing technology careers, high school tech prep, and at-risk youth; National…

  12. Si and Mg pair-doped interlayers for improving performance of AlGaN/GaN heterostructure field effect transistors grown on Si substrate

    NASA Astrophysics Data System (ADS)

    Ni, Yi-Qiang; He, Zhi-Yuan; Yao, Yao; Yang, Fan; Zhou, De-Qiu; Zhou, Gui-Lin; Shen, Zhen; Zhong, Jian; Zheng, Yue; Zhang, Bai-Jun; Liu, Yang

    2015-05-01

    We report a novel structure of AlGaN/GaN heterostructure field effect transistors (HFETs) with a Si and Mg pair-doped interlayer grown on Si substrate. By optimizing the doping concentrations of the pair-doped interlayers, the mobility of 2DEG increases by twice for the conventional structure under 5 K due to the improved crystalline quality of the conduction channel. The proposed HFET shows a four orders lower off-state leakage current, resulting in a much higher on/off ratio (˜ 109). Further temperature-dependent performance of Schottky diodes revealed that the inhibition of shallow surface traps in proposed HFETs should be the main reason for the suppression of leakage current. Project supported by the National Natural Science Foundation of China (Grant Nos. 51177175 and 61274039), the National Basic Research Project of China (Grant Nos. 2010CB923200 and 2011CB301903), the Ph.D. Program Foundation of Ministry of Education of China (Grant No. 20110171110021), the International Sci. & Tech. Collaboration Program of China (Grant No. 2012DFG52260), the National High-tech R&D Program of China (Grant No. 2014AA032606), the Science and Technology Plan of Guangdong Province, China (Grant No. 2013B010401013), and the Opened Fund of the State Key Laboratory on Integrated Optoelectronics (Grant No. IOSKL2014KF17).

  13. Washing Out the Competition

    NASA Technical Reports Server (NTRS)

    2001-01-01

    AJT Associates, Inc. (AJT) worked with NASA to develop a revolutionary ozone-based laundry system. AJT's TecH2Ozone(R) wash system presents its customers with an energy-efficient, cost-effective, and environmentally safe way to perform commercial laundering. TecH2Ozone significantly reduces the amount of water and chemical used as compared to traditional commercial laundry systems. This reduction has resulted in lower cost and shorter wash cycles. And due to the reduced use of chemicals, a significant portion of the rinse water is recycled back into the system for reuse. TecH2Ozone customers, such as hotels and other large commercial laundry facilities, have felt the benefits of this equipment. Because of the reduced cycle times, fewer washers are needed and there is a notable increase in the cleanliness of the laundry. The reduction in chemical residues is a boon to customers with allergies and those prone to skin irritation from chemicals retained in regular laundry. AJT Associates, Inc. (AJT) worked with NASA to develop a revolutionary ozone-based laundry system. AJT's TecH2Ozone(R) wash system presents its customers with an energy-efficient, cost-effective, and environmentally safe way to perform commercial laundering.

  14. U.S. EPA, Pesticide Product Label, HERCON INSECTAPE HIGH-TECH WITH PROPOXUR, 03/26/1990

    EPA Pesticide Factsheets

    2011-04-21

    ... I 'I I , I --~J:c- - - . - i [] I~~~~il ['~~I (1 /~j ~;[rLp) AAA. Customer Interlace Cable Interface / f (1 I I I I I .. --- j 'I r-/ \\ , I,-c-' - f r t' '/ ,~J I ,r . ...

  15. Future Assets, Student Talent (FAST)

    NASA Technical Reports Server (NTRS)

    1992-01-01

    Future Assets, Student Talent (FAST) motivates and prepares talented students with disabilities to further their education and achieve High Tech and professional employment. The FAST program is managed by local professionals, business, and industry leaders; it is modeled after High School High Tech project TAKE CHARGE started in Los Angeles in 1983. Through cooperative efforts of Alabama Department of Education, Vocational Rehabilitation, Adult and Children Services, and the President's Committee on Employment of People with Disabilities, north central Alabama was chosen as the second site for a High School High Tech project. In 1986 local business, industry, education, government agencies, and rehabilitation representatives started FAST. The program objectives and goals, results and accomplishments, and survey results are included.

  16. Green Power Partnership Top 30 Tech & Telecom

    EPA Pesticide Factsheets

    The U.S. EPA's Green Power Partnership is a voluntary program designed to reduce the environmental impact of electricity generation by promoting renewable energy. On this list are the largest green power users among tech and telecom partners within the GPP

  17. LASER Tech Briefs, September 1993. Volume 1, No. 1

    NASA Technical Reports Server (NTRS)

    Schnirring, Bill (Editor)

    1993-01-01

    This edition of LASER Tech briefs contains a feature on photonics. The other topics include: Electronic Components and Circuits. Electronic Systems, Physical Sciences, Materials, Computer Programs, Mechanics, Machinery, Fabrication Technology, Mathematics and Information Sciences, Life Sciences and books and reports.

  18. National Tech Prep Conference Review--Best Practices for Changing Times.

    ERIC Educational Resources Information Center

    Vandenberg, Victoria

    1995-01-01

    Provides an overview of the National Tech Prep Network Annual Conference in Atlanta, Georgia, October 5-7, 1995. Issues addressed include changes in funding for vocational education, new block grants, marketing programs, partnerships, and school to work. (JOW)

  19. NASA Tech Briefs, December 1995. Volume 19, No. 12

    NASA Technical Reports Server (NTRS)

    1995-01-01

    Topics include: a special focus section on Bio/Medical technology, electronic components and circuits, electronic systems, physical sciences, materials, computer programs, mechanics, machinery, manufacturing/fabrication, mathematics and information sciences, book and reports, and a special section on Laser Tech Briefs.

  20. A holistic approach to supporting staff in a pediatric hospital setting.

    PubMed

    Schwerman, Nichole; Stellmacher, Judy

    2012-09-01

    Health care professionals experience significant stress in the workplace. Building opportunities for health care professionals to manage stress is essential. Children's Hospital of Wisconsin designed a holistic set of programs called the R&R Series to support the emotional, cognitive, and spiritual health of staff and assist staff in using self-care strategies to build resiliency. Six hundred seventy program evaluations were collected during a 1-year pilot series. Program participants were from a wide variety of departments throughout the health care system. Staff reported feeling more supported, being better able to manage work and life stress, and practicing the self-care techniques they learned. Programs such as the R&R Series are one way to promote the overall health and resiliency of health care professionals. Copyright 2012, SLACK Incorporated.

  1. Technology Components as Adjuncts to Family-Based Pediatric Obesity Treatment in Low-Income Minority Youth.

    PubMed

    Tripicchio, Gina L; Ammerman, Alice S; Neshteruk, Cody; Faith, Myles S; Dean, Kelsey; Befort, Christie; Ward, Dianne S; Truesdale, Kimberly P; Burger, Kyle S; Davis, Ann

    2017-12-01

    Strategies to treat pediatric obesity are needed, especially among high-need populations. Technology is an innovative approach; however, data on technology as adjuncts to in-person treatment programs are limited. A total of 64 children [body mass index (BMI) ≥85th percentile, mean age = 9.6 ± 3.1 years, 32.8% female, 84.4% Hispanic] were recruited to participate in one of three cohorts of a family-based behavioral group (FBBG) treatment program: FBBG only, TECH1, and TECH2. Rolling, nonrandomized recruitment was used to enroll participants into three cohorts from May 2014 to February 2015. FBBG began in May 2014 and received the standard, in-person 12-week treatment only (n = 21); TECH1 began in September 2014 and received FBBG plus a digital tablet equipped with a fitness app (FITNET) (n = 20); TECH2 began in February 2015 and received FBBG and FITNET, plus five individually tailored TeleMed health-coaching sessions delivered via Skype (n = 23). Child BMI z-score (BMI-z) was assessed at baseline and postintervention. Secondary aims examined weekly FBBG attendance, feasibility/acceptability of FITNET and Skype, and the effect of technology engagement on BMI-z. FBBG and TECH1 participants did not show significant reductions in BMI-z postintervention [FBBG: β = -0.05(0.04), p = 0.25; TECH1: β = -0.006(0.06), p = 0.92], but TECH2 participants did [β = -0.09(0.02), p < 0.001] and TeleMed session participation was significantly associated with BMI-z reduction [β = -0.04(0.01), p = 0.01]. FITNET use and FBBG attendance were not associated with BMI-z in any cohort. Overall, participants rated the technology as highly acceptable. Technology adjuncts are feasible, used by hard-to-reach participants, and show promise for improving child weight status in obesity treatment programs.

  2. General Aviation Aircraft Safety, The Princeton University Conference (119th) Held at Princeton, N.J. on October 24-25 1973

    DTIC Science & Technology

    1974-10-01

    of the fact that we want to get information to pilots which will create a meaningful mental picture for the pilot, we still teach classical high and...universities and other flight safety groups ) I that porbapq bove R creat deal of safety technology nvailable in order that we c.’n nssRil..tp mtn,,ifacturers to...Dr. David Kehlman, who directs the project at Kansas, is with us and I am sure he will be glad to talk abuut the airplanc with you. In thiR program

  3. A Study on the Effects of Variable Surface Area to Volume Ratio on Closed Bomb Burn Rates

    DTIC Science & Technology

    1985-10-01

    chrarge amnplif ier. Data acquisition was madie onl a Nic -olet Explorer Ill digital oscilloscope, followed by dlata reduction on aI PUP 11/34 coimpiterA...of Tech Jet PropulsLon Laboratory 2 Thiokol Corporation ATTN: L. D. StrandElkton Division 4800 Oak Grove Drive ATL’N: R. Biddle PsdnC 10 Tec~h Lib

  4. High Tech Educators Network Evaluation.

    ERIC Educational Resources Information Center

    O'Shea, Dan

    A process evaluation was conducted to assess the High Tech Educators Network's (HTEN's) activities. Four basic components to the evaluation approach were documentation review, program logic model, written survey, and participant interviews. The model mapped the basic goals and objectives, assumptions, activities, outcome expectations, and…

  5. Expanding Urban American Indian Youths' Repertoire of Drug Resistance Skills: Pilot Results from a Culturally Adapted Prevention Program

    ERIC Educational Resources Information Center

    Kulis, Stephen; Dustman, Patricia A.; Brown, Eddie F.; Martinez, Marcos

    2013-01-01

    This article examines changes in the drug resistance strategies used by urban American Indian (UAI) middle school students during a pilot test of a substance use prevention curriculum designed specifically for UAI youth, "Living in 2 Worlds" (L2W). L2W teaches four drug resistance strategies (refuse, explain, avoid, leave [R-E-A-L]) in…

  6. A SCALE-UP Mock-Up: Comparison of Student Learning Gains in High- and Low-Tech Active-Learning Environments

    ERIC Educational Resources Information Center

    Soneral, Paula A. G.; Wyse, Sara A.

    2017-01-01

    Student-centered learning environments with upside-down pedagogies (SCALE-UP) are widely implemented at institutions across the country, and learning gains from these classrooms have been well documented. This study investigates the specific design feature(s) of the SCALE-UP classroom most conducive to teaching and learning. Using pilot survey…

  7. An Analysis of Information Systems Technology Initiatives and Small Businesses in the DoD Small Business Innovation Research (SBIR) Program

    DTIC Science & Technology

    2012-09-01

    PAGE INTENTIONALLY LEFT BLANK xv LIST OF ACRONYMS AND ABBREVIATIONS CAE Component Acquisition Executive COTS Commercial Off-The-Shelf DARPA...and reduce program lifecycle costs by expanding the pool of vendors and incorporating small innovative high -tech businesses in defense IT...acquisition. Particularly within the high -tech IT sector, small businesses have been consistently recognized as exceptional resources for the research and

  8. Manipulating presence influences the magnitude of virtual reality analgesia.

    PubMed

    Hoffman, Hunter G; Sharar, Sam R; Coda, Barbara; Everett, John J; Ciol, Marcia; Richards, Todd; Patterson, David R

    2004-09-01

    Excessive pain during medical procedures performed in unanesthetized patients is frequently reported, but can be reduced with virtual reality (VR) distraction. Increasing the person's illusion of going into the virtual world may increase how effectively VR distracts pain. Healthy volunteers aged 18-20 years participated in a double-blind between-groups design. Each subject received a brief baseline thermal pain stimulus, and the same stimulus again minutes later with either a Low Tech or a High Tech VR distraction. Each subject provided subjective 0-10 ratings of cognitive, sensory and affective components of pain, and rated their illusion of going inside the virtual world. Subjects in the High Tech VR group reported a stronger illusion of going into the virtual world (VR presence) than subjects in the Low Tech VR group, (4.2 vs. 2.5, respectively, P = 0.009) and more pain reduction (reduction of worst pain is 3.1 for High Tech VR vs. 0.7 for Low Tech VR, P < 0.001). Across groups, the amount of pain reduction was positively and significantly correlated with VR presence levels reported by subjects ( r = 0.48 for 'worst pain', P < 0.005).

  9. Cumulative Index to NASA Tech Briefs 1963-1969

    NASA Technical Reports Server (NTRS)

    1970-01-01

    Tech Briefs are short announcements of new technology derived from the research and development activities of the National Aeronautics and Space Administration. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This Cumulative index to NASA Tech Briefs lists those published from 1963 through 1969. The main listing is divided into six categokies: Electrical (Electronic), Physical Sciences (Energy Sources), Materials (Chemistry), Life Sciences, Mechanical, and Computer Programs.

  10. Recruitment and Selection of Minorities in High-Tech Organizations. A Sociological Perspective.

    DTIC Science & Technology

    1984-09-01

    Gretchen M. Luebbe Doris R. Entwisle Nancy A. Madden Joyce L. Epstein Kirk Nabors James Fennessey Alejandro Portes Denise C. Gottfredson Donald C. Rickert...Jr. Gary D. Gottfredson Laura Hersh Salganik Linda S. Gottfredson Robert E. Slavin Edward J. Harsch Jane St. John John H. Hollifield Valarie...and intelligence --as the primary determinants of minority and female underrepresentation in high-tech occupations. Despite voluminous research

  11. DoD Science and Engineering Apprenticeship Program for High-School Students

    DTIC Science & Technology

    1995-06-01

    Mu Alpha Theta for Computers, Calculus, Integral Calculus, and Precalculus ; 1994 Georgia Tech Distinguished Math Scholar; Captain of First Place...Computers. Calr.uIns. TntPg^i Painii»«. and Precalculus ; 1994 Georgia Tech Distinguished Math Scholar;.Captain of.First.Place Brain Bowl

  12. KSC Tech Transfer News, Volume 5, No. 2

    NASA Technical Reports Server (NTRS)

    Nichols, James D.

    2013-01-01

    Kennedy Tech Transfer News is the semiannual magazine of the Innovative Partnerships Program Office at NASA Kennedy Space Center in Cape Canaveral, Florida. This magazine seeks to inform and educate cMI servant and Contractor personnel at Kennedy about actively participating in achieving NASA's technology transfer goals

  13. An Automated Slide Classification System at Georgia Tech

    ERIC Educational Resources Information Center

    LoPresti, Maryellen

    1973-01-01

    The Georgia Tech Architecture Library slide collection is being revolutionized by adapting the Santa Cruz Slide Classification System. The slide catalog record is being transferred inexpensively to tapes and updated by the computer. Computer programs print out indexes in any of fifteen different sort fields. (Author)

  14. Not Just for CTE Teachers

    ERIC Educational Resources Information Center

    Reese, Susan

    2005-01-01

    Connecting education and careers through professional development experiences can benefit academic teachers as well as career tech teachers. At the Upper Rio Grande College Tech-Prep Youth Consortium in El Paso, Texas, there is a professional development program that helps academic teachers see the connection between learning and earning. A…

  15. It's Your Game-Tech: Toward Sexual Health in the Digital Age.

    PubMed

    Shegog, Ross; Peskin, Melissa F; Markham, Christine; Thiel, Melanie; Karny, Efrat; Addy, Robert C; Johnson, Kimberly A; Tortolero, Susan

    2014-08-01

    Adolescent sexually transmitted infection (STI) and birth rates indicate a need for effective middle school HIV/STI, and pregnancy prevention curricula to delay, or mitigate consequences of, early sexual activity. Individual and organizational barriers to adoption, implementation, and maintenance, however, can hamper dissemination of evidence-based sexual health curricula, adversely impacting fidelity and reach. Internet-based approaches may help mitigate these barriers. This paper describes the development and feasibility testing of It's Your Game ( IYG )-Tech, a stand-alone 13-lesson Internet-based sexual health life-skills curriculum adapted from an existing effective sexual health curriculum-It's Your Game… Keep it Real ( IYG ). IYG -Tech development adaptation steps were to: 1) Select a suitable effective program and gather the original program materials; 2) Develop "proof of concept" lessons and test usability and impact; 3) Develop the program design document describing the core content, scope, and methods and strategies; and 4) produce the new program. Lab- and school-based tests with middle school students demonstrated high ratings on usability parameters and immediate impact on selected psychosocial factors related to sexual behavior-perceptions of friends' beliefs, reasons for not having sex, condom use self-efficacy, abstinence intentions, negotiating with others to protect personal rules, and improved knowledge about what constitutes healthy relationships (all p < .05). Youth rated IYG -Tech is favorably compared to other learning channels (>76.2% agreement) and rated the lessons as helpful in making healthy choices, selecting personal rules, detecting challenges to those rules, and protecting personal rules through negotiation and refusal skills (89.5% - 100%). Further efficacy testing is indicated for IYG -Tech as a potential strategy to deliver effective HIV/STI, and pregnancy prevention to middle school youth.

  16. First Spaceborne GNSS-Reflectometry Observations of Hurricanes From the UK TechDemoSat-1 Mission

    NASA Astrophysics Data System (ADS)

    Foti, Giuseppe; Gommenginger, Christine; Srokosz, Meric

    2017-12-01

    We present the first examples of Global Navigation Satellite Systems-Reflectometry (GNSS-R) observations of hurricanes using spaceborne data from the UK TechDemoSat-1 (TDS-1) mission. We confirm that GNSS-R signals can detect ocean condition changes in very high near-surface ocean wind associated with hurricanes. TDS-1 GNSS-R reflections were collocated with International Best Track Archive for Climate Stewardship (IBTrACS) hurricane data, MetOp ASCAT A/B scatterometer winds, and two reanalysis products. Clear variations of GNSS-R reflected power (σ0) are observed as reflections travel through hurricanes, in some cases up to and through the eye wall. The GNSS-R reflected power is tentatively inverted to estimate wind speed using the TDS-1 baseline wind retrieval algorithm developed for low to moderate winds. Despite this, TDS-1 GNSS-R winds through the hurricanes show closer agreement with IBTrACS estimates than winds provided by scatterometers and reanalyses. GNSS-R wind profiles show realistic spatial patterns and sharp gradients that are consistent with expected structures around the eye of tropical cyclones.

  17. Effects of Occupational Education Programs Offered by the Oklahoma Department of Career and Technology Education, Skills Centers Division, on the Recidivism Rate of Selected Groups of Released Offenders in Oklahoma

    ERIC Educational Resources Information Center

    Ely, Joseph William

    2012-01-01

    Scope and Method of Study: The purpose of this study was to describe the effects of career and technical education (CTE) on recidivism for offenders enrolled in the Oklahoma Department of Corrections CareerTech Skills Center School Systems (SCSS) programs. Specifically, the study mined existing CareerTech and ODOC data to: (a) compare the…

  18. Summer Research Experiences for Science and Art Teachers to Explore Astrobiology

    NASA Astrophysics Data System (ADS)

    Cola, J.; Gaucher, E.; Snell, T.; Greenwood, J.; Angra, A.; Zimmerman, C.; Williams, L. D.

    2012-12-01

    The Georgia Tech Center for Ribosomal Origins and Evolution, a center funded by the NASA Astrobiology Institute, developed an educational program titled, "Life on the Edge: Astrobiology." The purpose of the program was to provide high school educators with the exposure, materials, and skills necessary to prepare our future workforce and to foster student interest in scientific discovery on Earth and throughout the universe. In an effort to promote and encourage entry into teaching careers, Georgia Tech paired teachers in the Georgia Intern-Fellowship for Teachers (GIFT) program with undergraduate students interested in becoming a teacher through the NSF Pre-Teaching REU program. The GIFT and Pre-Teaching fellows investigated extremophiles, which became the focus of a week-long, "Life on the Edge: Astrobiology " summer program developed by three high school educators, two undergraduate students and faculty in the Schools of Biology, and Chemistry and Biochemistry at Georgia Tech. Twenty high school students were introduced to hands-on activities, such as astrobiology inspired art and techniques such as genomic DNA purification, gel electrophoresis, and Polymerase Chain Reaction (PCR). The impact of the Astrobiology program on the GIFT researchers, Pre-Teaching REU students, high school students, and faculty are discussed.

  19. Viscoelastic Behavior of a Polyetheretherketone (PEEK) Composite.

    DTIC Science & Technology

    1987-12-01

    Nonlinear viscoelastic behavior has been observed with increasing crystallinity. Other measured properties are listed in Table 2. An acid digestion tech...I. ’ -- ’~mire .nzic at all.,-;; temperatu : r- ,,,r-,- ", 71 ". -ct.: f f: r n e :7 r y... ... tr 1. 1 i - -f t ’. -.. L-e er: i-; -_ re until :;e

  20. Ending the Tech Refresh Nightmare

    ERIC Educational Resources Information Center

    Demski, Jennifer

    2010-01-01

    As higher education budgets tighten in the ongoing recession, colleges and universities have found themselves questioning, lengthening, and even eliminating tech refresh cycles. Yet how deep an institution cuts into its refresh program can compromise its ability to provide an up-to-date and competitive computing environment for students and a…

  1. Tech Prep Associate Degree: A Win/Win Experience.

    ERIC Educational Resources Information Center

    Hull, Dan, Comp.; Parnell, Dale, Comp.

    Designed to serve as a "how to" guide for policymakers, and state, federal, and institutional leaders, as well as public school and higher education practitioners interested in developing a Tech Prep/Associate Degree (TPAD) consortium, this book provides a detailed synthesis of successful TPAD consortia and programs. The first five…

  2. Low-Tech High-Tech.

    ERIC Educational Resources Information Center

    Hart, Tom

    1997-01-01

    Outlines how Compact Disc-interactive (CD-i)--software that looks like a CD-ROM but operates independently using a television set--can be used in elementary, secondary, and vocational education. Discusses the cost effectiveness of CD-i and compares costs and operational issues with CD-ROM. Describes special features of one CD-i program,…

  3. High Touch in a High-Tech World

    ERIC Educational Resources Information Center

    Gibson, Cindy L.

    2009-01-01

    In a world of high tech and low touch, it is easy for public relations programs to stray from tried-and-true interpersonal strategies long associated with solid communication planning. New technologies allow communications professionals to quickly send e-mails and telephone calls to selected groups. Social media sites provide users immediate…

  4. Chicago Manufacturing Tech Prep. Fiscal Year 1991 Final Report.

    ERIC Educational Resources Information Center

    Chicago City Colleges, IL.

    During its first year of development in 1991, the Chicago Manufacturing Technical Preparation (Tech Prep) Program established a plan for implementing an industry-driven, articulated 4-year manufacturing technology course of study that integrates applied academic courses with technical courses and meets industry hiring standards. The project…

  5. Tech Prep Model for Marketing Education.

    ERIC Educational Resources Information Center

    Ruhland, Sheila K.; King, Binky M.

    A project was conducted to develop two tech prep models for marketing education (ME) in Missouri to provide a sequence of courses for skill-enhanced and time-shortened programs. First, labor market trends, employment growth projections, and business and industry labor needs in Missouri were researched and analyzed. The analysis results were used…

  6. Creating Tech Wizards: Tech-Savvy Students Help Teachers Transform Practice

    ERIC Educational Resources Information Center

    Breiner, Beth

    2009-01-01

    In eastern Pennsylvania, middle schoolers are teaching the teachers how to use technology effectively in the classroom. This article describes the Technology Wizards program which was developed by the Carbon Lehigh Intermediate Unit's Department of Instructional Innovation. It is a radical departure from traditional educational professional…

  7. Developing Games and Simulations for Today and Tomorrow's Tech Savvy Youth

    ERIC Educational Resources Information Center

    Klopfer, Eric; Yoon, Susan

    2005-01-01

    Constructively promoting the educational development of today's young tech savvy students and fostering the productive technological facility of tomorrow's youth requires harnessing new technological tools creatively. The MIT Teacher Education Program (TEP) focuses on the research and development of educational computer-based simulations and games…

  8. Tech Transfer Magazine - KSC News Volume I, Number 2, Fall/Winter 2008

    NASA Technical Reports Server (NTRS)

    Dunn, Carol (Editor)

    2008-01-01

    Kennedy Tech Transfer News is the semiannual magazine of the Innovative Partnerships Program Office at NASA Kennedy Space Center in Cape Canaveral, Florida. This magazine seeks to inform and educate cMI servant and Contractor personnel at Kennedy about actively participating in achieving NASA's technology transfer goals:

  9. Rhode Island Tech Prep Business & Industry Resource Guide.

    ERIC Educational Resources Information Center

    Community Coll. of Rhode Island, Warwick.

    This guide provides educators with information about developing partnerships with businesses. It begins with a rationale for forging education-business relationships and highlights benefits to all parties--educators, businesses, and students. The Rhode Island Tech Prep Associate Degree Program is cited as an example of how to create win-win…

  10. Effects of an Abbreviated Obesity Intervention Supported by Mobile Technology: The ENGAGED Randomized Clinical Trial

    PubMed Central

    Spring, Bonnie; Pellegrini, Christine A.; Pfammatter, Angela; Duncan, Jennifer M.; Pictor, Alex; McFadden, H. Gene; Siddique, Juned; Hedeker, Donald

    2017-01-01

    Objectives To determine the effects on weight loss of three abbreviated behavioral weight loss interventions with and without coaching and mobile technology. Methods Randomized controlled efficacy study of three six-month weight loss treatments delivered to 96 adults with obesity: 1) self-guided [SELF], 2) standard [STND], or 3) technology-supported [TECH]. STND and TECH received 8 in-person group treatment sessions. SELF and STND used paper diaries to self-monitor diet, activity, and weight; TECH used a smartphone application with social networking features and wireless accelerometer. Results Weight loss was greater for TECH and STND than SELF at 6 months [−5.7kg (95% CI: −7.2, −4.1) vs. −2.7kg (95% CI: −5.1, −0.3), p<.05]), but not 12 months. TECH and STND did not differ except that more STND (59%) than TECH (34%) achieved ≥5% weight loss at 6 months (P < 0.05). Self-monitoring adherence was greater in TECH than STND (P <0.001), greater in both interventions than SELF (P <0.001), and covaried with weight loss (r(84) = 0.36 − 0.51, P<.001). Conclusions Abbreviated behavioral counseling can produce clinically meaningful weight loss regardless of whether self-monitoring is performed on paper or smartphone, but long-term superiority over standard of care self-guided treatment is challenging to maintain. PMID:28494136

  11. Advanced User Interface Capabilities for Application on Portable Computers

    DTIC Science & Technology

    1992-02-01

    0 060 iI 1 ........ ... r: switch_ e( pressure , switch ) r6 : pilot- valvecircuit(A, pilot valve) pilot_ valve_ circuit(B, pilot valve) r7...shutoff_valvecircwt(A, shutoff valve) shutoff_valve circuit(B, shutoff valve) r: pressure_ switch_ circuit(A, pressure switch ) pressure_ switch circuit(B... pressure switch ) r: indicator(A, pilot valve) indicator(B, pilot valve) indicator(A, shutoff valve) indicator(B, shutoff valve) indicator(A, pressure

  12. Characterization of Reaerosolization From Impingers in an Effort to Improve Airborne Virus Sampling

    DTIC Science & Technology

    2009-04-01

    Koutrakis, P. (1996) Inertial separation of ultrafine particles using a condensational growth/ virtual impaction system. Aerosol Sci. Tech. 25, 424–436...Environ. 42, 828–832. Demokritou, P., Gupta, T., and and Koutrakis, P. (2002) A high volume apparatus for the condensational growth of ultrafine ... particles for inhalation toxicological studies. Aerosol Sci. Tech. 36, 1061–1072. Floyd, R., and Sharp, D. G. (1978) Viral aggregation: Effects of salts

  13. Technology Cost and Schedule Estimation (TCASE) Final Report

    NASA Technical Reports Server (NTRS)

    Wallace, Jon; Schaffer, Mark

    2015-01-01

    During the 2014-2015 project year, the focus of the TCASE project has shifted from collection of historical data from many sources to securing a data pipeline between TCASE and NASA's widely used TechPort system. TCASE v1.0 implements a data import solution that was achievable within the project scope, while still providing the basis for a long-term ability to keep TCASE in sync with TechPort. Conclusion: TCASE data quantity is adequate and the established data pipeline will enable future growth. Data quality is now highly dependent the quality of data in TechPort. Recommendation: Technology development organizations within NASA should continue to work closely with project/program data tracking and archiving efforts (e.g. TechPort) to ensure that the right data is being captured at the appropriate quality level. TCASE would greatly benefit, for example, if project cost/budget information was included in TechPort in the future.

  14. Research Center Renaming Will Honor Senator Domenici

    NASA Astrophysics Data System (ADS)

    2008-05-01

    New Mexico Tech and the National Radio Astronomy Observatory (NRAO) will rename the observatory's research center on the New Mexico Tech campus to honor retiring U.S. Senator Pete V. Domenici in a ceremony on May 30. The building that serves as the scientific, technical, and administrative center for the Very Large Array (VLA) and Very Long Baseline Array (VLBA) radio telescopes will be named the "Pete V. Domenici Science Operations Center." The building previously was known simply as the "Array Operations Center." Sen. Pete V. Domenici Sen. Pete V. Domenici "The new name recognizes the strong and effective support for science that has been a hallmark of Senator Domenici's long career in public service," said Dr. Fred Lo, NRAO Director. New Mexico Tech President Daniel H. Lopez said Sen. Domenici has always been a supporter of science and research in Socorro and throughout the state. "He's been a statesman for New Mexico, the nation -- and without exaggeration -- for the world," Lopez said. "Anyone with that track record deserves this recognition." Van Romero, Tech vice president of research and economic development, has served as the university's main lobbyist in Washington, D.C., for more than a decade. He said Sen. Domenici has always been receptive to new ideas and willing to take risks. "Over the years, Sen. Domenici has always had time to listen to our needs and goals," Romero said. "He has served as a champion of New Mexico Tech's causes and we owe him a debt of gratitude for all his efforts over the decades." Originally dedicated in 1988, the center houses offices and laboratories that support VLA and VLBA operations. The center also supports work on the VLA modernization project and on the international Atacama Large Millimeter/submillimeter Array (ALMA) project. Work on ALMA at the Socorro center and at the ALMA Test Facility at the VLA site west of Socorro has focused on developing and testing equipment to be deployed at the ALMA site in Chile's Atacama Desert. The research facility, part of the National Science Foundation-funded NRAO, was located on the NM Tech campus through a joint Federal-State effort spearheaded by Domenici. "Senator Domenici has worked hard over the years to support research both at New Mexico Tech and at the NRAO, and our facility on the New Mexico Tech campus is a symbol of that support. It's highly appropriate to name it after him," said Dr. Ethan Schreier, President of Associated Universities Inc., which operates the NRAO for the National Science Foundation. Senator Domenici helped make New Mexico Tech's Magdalena Ridge Observatory (MRO) a reality and provided essential support for NRAO's VLA and VLBA. MRO is one of the world's most technologically-advanced optical observatories. The VLA is the most scientifically-productive ground-based telescope in the history of astronomy. "Both these facilities will advance the frontiers of 21st-Century astrophysics, and keep our state and its research community in the forefront of science worldwide," said Dr. Robert Dickman, NRAO's Director for New Mexico Operations. Domenici also was instrumental in bringing the International Law Enforcement Academy -- another New Mexico Tech division -- to Roswell. During the Reagan Administration, Domenici sponsored the legislation that allowed the university to use the "M" Mountain range for research and testing. Lopez said the U.S. Department of the Interior would not let the university conduct testing on the range. A high level bureaucrat told Laurence Lattman, then the president of Tech, that it "would take an act of Congress" for Tech to have unlimited access to the land. Domenici sponsored the legislation -- signed by Reagan -- that gave Tech access to the land. Over the years, Domenici's support has helped Tech launch the homeland security training program in Playas, the EarthScope research and other anti-terrorism training programs. "All these projects benefit New Mexico Tech," Lopez said. "But these programs also benefit the nation. Senator Domenici has always been careful to make sure that federal money went to programs that benefit the entire nation." The National Radio Astronomy Observatory is a facility of the National Science Foundation, operated under cooperative agreement by Associated Universities, Inc.

  15. Readability Formulas and Air Force Publications: A Review of Their Development and an Examination of Their Application.

    DTIC Science & Technology

    1989-09-01

    Us e o f t he Autf o mat ( d R, ~hI- I f I nd ex -to A\\-S ( ss- C ompreon iL Iit f Nir UreT-chniiil1Orders, November 1967. Tech -nical R( -1 SEG-TP...MEN or THEIR EUELO (U) AIR FORM lust Or TECH WRIGHT-PATTERSON 4WD ON SCHOOL OF SYST..UNCASSIFIED T FEMKINHOF SEP 09 OWITI L/LSR/89S-22 F/O 5/2 HL...their timely assistance in my search for obtaining the various arti-zle- used in this research. I am also deeply indt-bted to rry advisor, Dr. David K

  16. LEED (Trademark) for Homes - Pilot Study: Evaluation for Use in Army Family Housing

    DTIC Science & Technology

    2007-11-01

    Star certification requirements. Once the LEED® for Homes tool is formally launched, Army Family Housing program managers will issue policy on...ER D C/ CE R L TR -0 7 -4 5 Sustainability Sustainability in Army Family Housing LEED® for Homes— Pilot Study Evaluation for Use in Army... Family Housing Lisa Bobotas and Matt Hinson Center of Standardization for Army Family Housing, Norfolk District Also: Paul Christensen, Gary

  17. Relationship of Technology Education to Tech Prep.

    ERIC Educational Resources Information Center

    Anderson, Lowell D.

    With increased global competition, it is imperative that secondary school programs be reformed so as to be able to turn out productive workers having basic skills in reading, writing, and mathematics and the ability to solve problems and learn new information. One proposed reform, tech prep, can be defined as a technical education alternative to…

  18. Learning Where They Teach

    ERIC Educational Resources Information Center

    Robelen, Erik W.

    2007-01-01

    In 2004, High Tech High, a charter school chain based in San Diego, California, became the state's first charter-management organization (CMO) to gain state approval to operate its own teacher-credentialing program. It is not stopping there. In August, it will cut the ribbon on the High Tech High graduate school of education, which appears to be…

  19. Planning and Designing Today's Career Tech Facility

    ERIC Educational Resources Information Center

    Seaman, James

    2010-01-01

    During the past 20 years, career and technical education (CTE) has gone through significant changes. CTE has evolved in response to the changes technology has had on the job market. Preparing students for high-tech, high-skill job opportunities is the new focus. The facilities that house these programs, however, have not kept pace with these…

  20. A Specification Technique for the Common APSE (Ada Programming Support Environments) Interface Set.

    DTIC Science & Technology

    1984-04-01

    NOSC So fTech Code 8322 460 Totten Pond Road San Diego, CA 92152 Waltham, MA 02154 Philip Myers Chuck Waltrip Dave Pasterchik Johns Hopkins University...06856 Georgia Tech Atlanta, GA 30332 Reed Kotler Lockheed Missiles & Space Dick Drake 1111 Lockheed Way IBM Sunnyvale, CA 94086 Federal Systems

  1. The Rise and Fall of Swedish Educational Technology 1960-1980

    ERIC Educational Resources Information Center

    Wallin, Erik

    2005-01-01

    In Sweden educational technology (EdTech) prospered during the 1960s and 1970s inspired by US experiences from primarily programmed instruction. The Departments of Education at the universities started different activities of research and other bodies developed EdTech products for commercial use. In some business firms in-service training of staff…

  2. TechXcite: Discover Engineering--A New STEM Curriculum

    ERIC Educational Resources Information Center

    Sallee, Jeff; Schmitt-McQuitty, Lynn; Swint, Sherry; Meek, Amanda; Ybarra, Gary; Dalton, Rodger

    2015-01-01

    TechXcite is an engineering-focused, discovery-based after-school science, technology, engineering, and math (STEM) program. The free curriculum is downloadable from http://techxcite.pratt.duke.edu/ and is comprised of eight Modules, each with four to five 45-minute activities that exercise the science and math learned in school by using…

  3. Computer systems and software engineering

    NASA Technical Reports Server (NTRS)

    Mckay, Charles W.

    1988-01-01

    The High Technologies Laboratory (HTL) was established in the fall of 1982 at the University of Houston Clear Lake. Research conducted at the High Tech Lab is focused upon computer systems and software engineering. There is a strong emphasis on the interrelationship of these areas of technology and the United States' space program. In Jan. of 1987, NASA Headquarters announced the formation of its first research center dedicated to software engineering. Operated by the High Tech Lab, the Software Engineering Research Center (SERC) was formed at the University of Houston Clear Lake. The High Tech Lab/Software Engineering Research Center promotes cooperative research among government, industry, and academia to advance the edge-of-knowledge and the state-of-the-practice in key topics of computer systems and software engineering which are critical to NASA. The center also recommends appropriate actions, guidelines, standards, and policies to NASA in matters pertinent to the center's research. Results of the research conducted at the High Tech Lab/Software Engineering Research Center have given direction to many decisions made by NASA concerning the Space Station Program.

  4. Cost Effective Bioethanol via Acid Pretreatment of Corn Stover, Saccharification, and Conversion via a Novel Fermentation Organism: Cooperative Research and Development Final Report, CRADA Number: CRD-12-485

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dowe, N.

    2014-05-01

    This research program will convert acid pretreated corn stover to sugars at the National Renewable Energy Laboratory (NREL) and then transfer these sugars to Honda R&D and its partner the Green Earth Institute (GEI) for conversion to ethanol via a novel fermentation organism. In phase one, NREL will adapt its pretreatment and saccharification process to the unique attributes of this organism, and Honda R&D/GEI will increase the sugar conversion rate as well as the yield and titer of the resulting ethanol. In later phases, NREL, Honda R&D, and GEI will work together at NREL to optimize and scale-up to pilot-scalemore » the Honda R&D/GEI bioethanol production process. The final stage will be to undertake a pilot-scale test at NREL of the optimized bioethanol conversion process.« less

  5. Christa McAuliffe meets other STS 51-L crewmembers

    NASA Image and Video Library

    1985-09-10

    S85-39943 (9 Sept. 1985) --- Sharon Christa McAuliffe, STS-51L citizen observer/payload specialist representing the Teacher in Space Program, meets the other STS-51L crew members. The crew members pictured are (l.-r.) astronauts Michael J. Smith, pilot; Ronald E. McNair, mission specialist; and Francis R. (Dick) Scobee, mission commander. Photo credit: NASA

  6. Radiation Insulation

    NASA Technical Reports Server (NTRS)

    1993-01-01

    An aluminized polymer film is a highly effective radiation barrier for both manned and unmanned spacecraft. Variations of this space-devised material are also used as an energy conservation technique for homes and offices. One commercial company, Tech 2000 (formerly Buckeye Radiant Barrier), markets 'Super R' Radiant Barrier, which finds its origins in the Apollo Mission programs. The material is placed between wall studs and exterior facing before siding or in new roof installation, between roof support and roof sheathing. Successful retrofit installations have included schools and shrink wrap ovens. The radiant barrier blocks 95 percent of radiant energy, thus retaining summer heat and blocking winter cold. Suppliers claim utility bill reductions of 20 percent or more.

  7. Jugando en el Pidi: Active Learning, Early Child Development and Interactive Radio Instruction. Supporting Caregivers, Parents, and Young Children. LearnTech Case Study Series, No. 4.

    ERIC Educational Resources Information Center

    Bosch, Andrea; Crespo, Cecilia

    In 1993, Bolivia was selected as a site to pilot an interactive radio instruction (IRI) project that would provide practical support to adult caregivers and children around early childhood development. Through linkages with health and education networks, PIDI (Programa Integral de Desarrollo Infantil) provided young children under the age of six…

  8. Effects of an abbreviated obesity intervention supported by mobile technology: The ENGAGED randomized clinical trial.

    PubMed

    Spring, Bonnie; Pellegrini, Christine A; Pfammatter, Angela; Duncan, Jennifer M; Pictor, Alex; McFadden, H Gene; Siddique, Juned; Hedeker, Donald

    2017-07-01

    To determine the effects on weight loss of three abbreviated behavioral weight loss interventions with and without coaching and mobile technology. A randomized controlled efficacy study of three 6-month weight loss treatments was conducted in 96 adults with obesity: 1) self-guided (SELF), 2) standard (STND), or 3) technology-supported (TECH). STND and TECH received eight in-person group treatment sessions. SELF and STND used paper diaries to self-monitor diet, activity, and weight; TECH used a smartphone application with social networking features and wireless accelerometer. Weight loss was greater for TECH and STND than SELF at 6 months (-5.7 kg [95% confidence interval: -7.2 to -4.1] vs. -2.7 kg [95% confidence interval: -5.1 to -0.3], P < 0.05) but not 12 months. TECH and STND did not differ except that more STND (59%) than TECH (34%) achieved ≥ 5% weight loss at 6 months (P < 0.05). Self-monitoring adherence was greater in TECH than STND (P < 0.001), greater in both interventions than SELF (P < 0.001), and covaried with weight loss (r(84) = 0.36-0.51, P < 0.001). Abbreviated behavioral counseling can produce clinically meaningful weight loss regardless of whether self-monitoring is performed on paper or smartphone, but long-term superiority over standard of care self-guided treatment is challenging to maintain. © 2017 The Obesity Society.

  9. Communities of Interest: Collaborating on Technology Challenges

    DTIC Science & Technology

    2015-04-01

    Tech- nology, and Logistics Office of International Cooperation and the Assistant Secretary of Defense for Research and Evalua- tion ( ASD [R&E]). With...DoD R&E budgetary responsibilities: The R&E Executive Committee (R&E ExCom), the most senior- level group, is comprised of the ASD (R&E), Service...COIs can draw from many new resources to inform and populate their respective Technology Roadmaps. The ASD (R&E) hosts a COI Collaboration workspace on

  10. Evaluation of Littoral Combat Ships for Open-Ocean Anti-Submarine Warfare

    DTIC Science & Technology

    2016-03-01

    known. Source: R. R. Hill, R. G. Carl, and L. E. Champagne , “Using Agent-Based Simulation to Empirically Examine Search Theory Using a Historical Case...coverage over a small area. Source: R. R. Hill, R. G. Carl, and L. E. Champagne , “Using Agent-Based Simulation to Empirically Examine Search Theory...Defense Tech, May 30. Hill, R R, R G Carl, and L E Champagne . “Using agent-based simulation to empirically examine search theory using a

  11. SpaceTech—Postgraduate space education

    NASA Astrophysics Data System (ADS)

    de Bruijn, Ferdi J.; Ashford, Edward W.; Larson, Wiley J.

    2008-07-01

    SpaceTech is a postgraduate program geared primarily for mid-career space professionals seeking to gain or improve their expertise in space systems engineering and in business engineering. SpaceTech provides a lifelong impact on its participants by broadening their capabilities, encouraging systematic "end-to-end" thinking and preparing them for any technical or business-related engineering challenges they may encounter. This flexible 1-year program offers high competency gain and increased business skills. It is held in attractive locations in a flexible, multi-cultural environment. SpaceTech is a highly effective master's program certified by the esteemed Technical University of Delft (TUD), Netherlands. SpaceTech provides expert instructors who place no barriers between themselves and participants. The program combines innovative and flexible new approaches with time-tested methods to give participants the skills required for future missions and new business, while allowing participants to meet their work commitments at the same time as they study for their master's degree. The SpaceTech program is conducted in separate sessions, generally each of 2-week duration, separated by periods of some 6-8 weeks, during which time participants may return to their normal jobs. It also includes introductory online course material that the participants can study at their leisure. The first session is held at the TUD, with subsequent sessions held at strategic space agency locations. By participating at two or more of these sessions, attendees can earn certificates of satisfactory completion from TU Delft. By participating in all of the sessions, as well as taking part in the companion Central Case Project (CCP), participants earn an accredited and highly respected master's degree in Space Systems Engineering from the TUD. Seven distinct SpaceTech modules are provided during these sessions: Space Mission Analysis and Design, Systems Engineering, Business Engineering, Interpersonal Skills, Telecommunications, Earth Observation and Navigation. A group CCP, a major asset of this unique program, is a focused project, aimed at the formation of a credible virtual commercial space-related business. Participants exercise space systems engineering fundamentals as well as marketing and business engineering tools, with the goal of creating a financially viable business opportunity. They then present the result, in the form of an unsolicited proposal to potential investors, as well as a varied group of engineers, managers and executives from the space community. During the CCP, participants learn the ties between mission and system design and the potential return to investors. They develop an instinct for the technical concepts and which of the parameters to adjust to make their newly conceived business more effective and profitable.

  12. Centrifuge training program with "push-pull" elements.

    PubMed

    Mikuliszyn, Romuald; Zebrowski, Mariusz; Kowalczuk, Krzysztof

    2005-05-01

    Pilots of fighter aircraft are often exposed to maneuvers that produce negative acceleration (-Gz) immediately followed by positive acceleration (+Gz). This sequence has been found to reduce tolerance to +Gz, a phenomenon known as the "push-pull" effect. We devised a centrifuge training program to demonstrate this phenomenon to pilots. The centrifuge of the Military Institute of Aviation Medicine in Warsaw, Poland, was modified in 1996 to allow active positioning of the gondola during rotation. Head-down position of -6 degrees to -40 degrees were used to produce relative -Gz (r-Gz) in a range down to 0.2. As a side effect, this produces Gy acceleration between -1.3 Gy and -1.6 Gy. Pilots completed normal centrifuge training, including a relaxed, gradual-onset run and three rapid-onset runs. They were then exposed to a profile that included a series of push-pull exposures where r-Gz was followed by +Gz with stepwise increases in the latter from +2.5 to +5 Gz. The final profile was a simulated aerial combat maneuver with push-pull elements. The trainees expressed surprise at the push-pull effect, which forced them to begin an anti-G straining maneuver at lower levels than normal. They complained about the presence of the Gy, which rarely occurs in aircraft. This type of profile appears useful for training pilots about the push-pull phenomenon. After collection of additional data, the profiles may be refined.

  13. Starting Up in a Down Market, with a Boost From Entrepreneurship Graduate Programs

    NASA Astrophysics Data System (ADS)

    Taylor, Cyrus

    2003-03-01

    In the late 1990's, it seemed that any two graduate students and their dog could start and grow a high-tech company. With the collapse of, first, the internet sector, and, more recently, the telecommunications sector, there has been a traumatic shake-out among high tech firms, and the challenges facing new firms appear to have greatly increased. This talk will highlight the keys for physics entrepreneurs to survive and even thrive in this environment, with a special initial boost from new graduate programs combining business school and physics training. The infrastructure needed by educational programs designed to empower physicists as entrepreneurs is discussed.

  14. Mathematics and Science Teachers Professional Development with Local Businesses to Introduce Middle and High School Students to Opportunities in STEM Careers

    ERIC Educational Resources Information Center

    Miles, Rhea; Slagter van Tryon, Patricia J.; Mensah, Felicia Moore

    2015-01-01

    TechMath is a professional development program that forms collaborations among businesses, colleges, and schools for the purpose of promoting Science, Technology, Engineering, and Mathematics (STEM) careers. TechMath has provided strategies for creating highquality professional development by bringing together teachers, students, and business…

  15. 2013: A Year in Space

    NASA Image and Video Library

    2014-01-24

    2013 was a big year for Ames Research Center's space exploration programs, including several new launches, and continuing a long history of cutting-edge innovations. Projects listed include: LADEE, IRIS, Kepler, PhoneSat, TechEdSat, NLAS, K10 Rover, Seedling Growth-1, Cell Biology Tech Demonstration, ADEPT, Spaceloft 7 and 8, CheMin, MSL, MRO, Bion-M1, Pioneer 11.

  16. Preparing Michigan Students for the Jobs of Tomorrow: The Report of the Tech Prep Task Force.

    ERIC Educational Resources Information Center

    Michigan State Board of Education, Lansing.

    Both secondary schools and community colleges are under pressure to increase the technical content of their curricula to produce graduates who can fill highly skilled technician jobs in a changing work force. Technical Preparation (Tech Prep) Programs are partnerships between these two institutional levels that incorporate career counseling and…

  17. Project COM-TECH (Bilingual Computer- and Technology-Oriented Program), 1985-86. OEA Evaluation Report.

    ERIC Educational Resources Information Center

    New York City Board of Education, Brooklyn. Office of Educational Assessment.

    In 1985-86, Project COM-TECH offered bilingual individualized instruction to 300 limited-English proficiency students at two New York City high schools (Bushwick in Brooklyn, and Brandeis in Manhattan). Using an enrichment approach, the project provided supplementary instruction in English as a second language (ESL), native language arts, and…

  18. Maintaining High-Tech Programs on a Low-Tech Budget

    ERIC Educational Resources Information Center

    Donham, Brent

    2003-01-01

    Technology is and will continue to be a driving force in the United States economy. The U.S. Department of Labor (2003) projects computer and data processing services to be the fastest growing segment of the economy between the years 2000-2010. A study by the National Association of Manufacturers (2001) indicates that more than 80 percent of…

  19. 2014 International Conference on Science & Engineering in Mathematics, Chemistry and Physics (ScieTech 2014)

    NASA Astrophysics Data System (ADS)

    2014-04-01

    2014 International Conference on Science & Engineering in Mathematics, Chemistry and Physics (ScieTech 2014), was held at the Media Hotel, Jakarta, Indonesia, on 13-14 January 2014. The ScieTech 2014 conference is aimed to bring together researchers, engineers and scientists in the domain of interest from around the world. ScieTech 2014 is placed on promoting interaction between the theoretical, experimental, and applied communities, so that a high level exchange is achieved in new and emerging areas within Mathematics, Chemistry and Physics. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting Conference Program as well as the invited and plenary speakers. This year, we received 187 papers and after rigorous review, 50 papers were accepted. The participants come from 16 countries. There are 5 (Five) Paralell Sessions and Four Keynote Speakers. It is an honour to present this volume of Journal of Physics: Conference Series (JPCS) and we deeply thank the authors for their enthusiastic and high-grade contributions. Finally, we would like to thank the conference chairmen, the members of the steering committee, the organizing committee, the organizing secretariat and the financial support from the conference sponsors that allowed the success of ScieTech 2014. The Editors of the Scietech 2014 Proceedings: Dr. Ford Lumban Gaol Dr. Benfano Soewito Dr. P.N. Gajjar

  20. RU SciTech: Weaving Astronomy and Physics into a University-sponsored Summer Camp for Middle School Students

    NASA Astrophysics Data System (ADS)

    Hart, Quyen N.

    2015-01-01

    We present a successful model for organizing a small University-sponsored summer camp that integrates astronomy and physics content with other science disciplines and computer programming content. The aim of our science and technology camp is to engage middle school students in a wide array of critical thinking tasks and hands-on activities centered on science and technology. Additionally, our program seeks to increase and maintain STEM interest among children, particularly in under-represented populations (e.g., Hispanic, African-American, women, and lower socioeconomic individuals) with hopes of decreasing disparities in diversity across many STEM fields.During this four-day camp, organized and facilitated by faculty volunteers, activities rotated through many STEM modules, including optics, telescopes, circuit building, computer hardware, and programming. Specifically, we scaffold camp activities to build upon similar ideas and content if possible. Using knowledge and skills gained through the AAS Astronomy Ambassadors program, we were able to integrate several astronomy activities into the camp, leading students through engaging activities, and conduct educational research. We present best practices on piloting a similar program in a university environment, our efforts to connect the learning outcomes common across all the modules, specifically in astronomy and physics, outline future camp activities, and the survey results on the impact of camp activities on attitudes toward science, technology, and science careers.

  1. Saturn Apollo Program

    NASA Image and Video Library

    1969-07-25

    The Apollo 11 mission, the first manned lunar mission, launched from the Kennedy Space Center, Florida via the Marshall Space Flight Center (MSFC) developed Saturn V launch vehicle on July 16, 1969 and safely returned to Earth on July 24, 1969. Aboard the space craft were astronauts Neil A. Armstrong, commander; Michael Collins, Command Module (CM) pilot; and Edwin E. Aldrin Jr., Lunar Module (LM) pilot. The CM, piloted by Michael Collins remained in a parking orbit around the Moon while the LM, named “Eagle’’, carrying astronauts Neil Armstrong and Edwin Aldrin, landed on the Moon. During 2½ hours of surface exploration, the crew collected 47 pounds of lunar surface material for analysis back on Earth. This photograph was taken as the mission’s first loaded sample return container arrived at Ellington Air Force Base by air from the Pacific recovery area. The rock box was immediately taken to the Lunar Receiving Laboratory at the Manned Spacecraft Center (MSC) in Houston, Texas. Happily posing for the photograph with the rock container are (L-R) Richard S. Johnston (back), special assistant to the MSC Director; George M. Low, MSC Apollo Spacecraft Program manager; George S. Trimble (back), MSC Deputy Director; Lt. General Samuel C. Phillips, Apollo Program Director, Office of Manned Spaceflight at NASA headquarters; Eugene G. Edmonds, MSC Photographic Technology Laboratory; Dr. Thomas O. Paine, NASA Administrator; and Dr. Robert R. Gilruth, MSC Director.

  2. Efficacy of It's Your Game-Tech: A Computer-Based Sexual Health Education Program for Middle School Youth.

    PubMed

    Peskin, Melissa F; Shegog, Ross; Markham, Christine M; Thiel, Melanie; Baumler, Elizabeth R; Addy, Robert C; Gabay, Efrat K; Emery, Susan Tortolero

    2015-05-01

    Few computer-based HIV, sexually transmitted infection (STI), and pregnancy prevention programs are available, and even fewer target early adolescents. In this study, we tested the efficacy of It's Your Game (IYG)-Tech, a completely computer-based, middle school sexual health education program. The primary hypothesis was that students who received IYG-Tech would significantly delay sexual initiation by ninth grade. We evaluated IYG-Tech using a randomized, two-arm nested design among 19 schools in a large, urban school district in southeast Texas (20 schools were originally randomized). The target population was English-speaking eighth-grade students who were followed into the ninth grade. The final analytic sample included 1,374 students. Multilevel logistic regression models were used to test for differences in sexual initiation between intervention and control students, while adjusting for age, gender, ethnicity, time between measures, and family structure. There was no significant difference in the delay of sexual activity or in any other sexual behavior between intervention and control students. However, there were significant positive between-group differences for psychosocial variables related to STI and condom knowledge, attitudes about abstinence, condom use self-efficacy, and perceived norms about sex. Post hoc analyses conducted among intervention students revealed some significant associations: "full exposure" (completion of all 13 lessons) and "mid-exposure" (5-8 lessons) students were less likely than "low exposure" (1-4 lessons) students to initiate sex. Collectively, our findings indicate that IYG-Tech impacts some determinants of sexual behavior, and that additional efficacy evaluation with full intervention exposure may be warranted. Copyright © 2015 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

  3. Automation Bias: Decision Making and Performance in High-Tech Cockpits

    NASA Technical Reports Server (NTRS)

    Mosier, Kathleen L.; Skitka, Linda J.; Heers, Susan; Burdick, Mark; Rosekind, Mark R. (Technical Monitor)

    1997-01-01

    Automated aids and decision support tools are rapidly becoming indispensible tools in high-technology cockpits, and are assuming increasing control of "cognitive" flight tasks, such as calculating fuel-efficient routes, navigating, or detecting and diagnosing system malfunctions and abnormalities. This study was designed to investigate "automation bias," a recently documented factor in the use of automated aids and decision support systems. The term refers to omission and commission errors resulting from the use of automated cues as a heuristic replacement for vigilant information seeking and processing. Glass-cockpit pilots flew flight scenarios involving automation "events," or opportunities for automation-related omission and commission errors. Pilots who perceived themselves as "accountable" for their performance and strategies of interaction with the automation were more likely to double-check automated functioning against other cues, and less likely to commit errors. Pilots were also likely to erroneously "remember" the presence of expected cues when describing their decision-making processes.

  4. GT-CATS: Tracking Operator Activities in Complex Systems

    NASA Technical Reports Server (NTRS)

    Callantine, Todd J.; Mitchell, Christine M.; Palmer, Everett A.

    1999-01-01

    Human operators of complex dynamic systems can experience difficulties supervising advanced control automation. One remedy is to develop intelligent aiding systems that can provide operators with context-sensitive advice and reminders. The research reported herein proposes, implements, and evaluates a methodology for activity tracking, a form of intent inferencing that can supply the knowledge required for an intelligent aid by constructing and maintaining a representation of operator activities in real time. The methodology was implemented in the Georgia Tech Crew Activity Tracking System (GT-CATS), which predicts and interprets the actions performed by Boeing 757/767 pilots navigating using autopilot flight modes. This report first describes research on intent inferencing and complex modes of automation. It then provides a detailed description of the GT-CATS methodology, knowledge structures, and processing scheme. The results of an experimental evaluation using airline pilots are given. The results show that GT-CATS was effective in predicting and interpreting pilot actions in real time.

  5. A smartphone-supported weight loss program: design of the ENGAGED randomized controlled trial.

    PubMed

    Pellegrini, Christine A; Duncan, Jennifer M; Moller, Arlen C; Buscemi, Joanna; Sularz, Alyson; DeMott, Andrew; Pictor, Alex; Pagoto, Sherry; Siddique, Juned; Spring, Bonnie

    2012-11-30

    Obesity remains a major public health challenge, demanding cost-effective and scalable weight management programs. Delivering key treatment components via mobile technology offers a potential way to reduce expensive in-person contact, thereby lowering the cost and burden of intensive weight loss programs. The ENGAGED study is a theory-guided, randomized controlled trial designed to examine the feasibility and efficacy of an abbreviated smartphone-supported weight loss program. Ninety-six obese adults (BMI 30-39.9 kg/m2) will be randomized to one of three treatment conditions: (1) standard behavioral weight loss (STND), (2) technology-supported behavioral weight loss (TECH); or (3) self-guided behavioral weight loss (SELF). All groups will aim to achieve a 7% weight loss goal by reducing calorie and fat intake and progressively increasing moderate intensity physical activity to 175 minutes/week. STND and TECH will attend 8 group sessions and receive regular coaching calls during the first 6 months of the intervention; SELF will receive the Group Lifestyle Balance Program DVD's and will not receive coaching calls. During months 1-6, TECH will use a specially designed smartphone application to monitor dietary intake, body weight, and objectively measured physical activity (obtained from a Blue-tooth enabled accelerometer). STND and SELF will self-monitor on paper diaries. Linear mixed modeling will be used to examine group differences on weight loss at months 3, 6, and 12. Self-monitoring adherence and diet and activity goal attainment will be tested as mediators. ENGAGED is an innovative weight loss intervention that integrates theory with emerging mobile technologies. We hypothesize that TECH, as compared to STND and SELF, will result in greater weight loss by virtue of improved behavioral adherence and goal achievement. NCT01051713.

  6. Photovoltaic pilot projects in the European community

    NASA Astrophysics Data System (ADS)

    Treble, F. C.; Grassi, G.; Schnell, W.

    The paper presents proposals received for the construction of photovoltaic pilot plants as part of the Commission of the European Communities' second 4-year solar energy R and D program. The proposed plants range from 30 to 300 kWp and cover a variety of applications including rural electrification, water pumping, desalination, dairy farming, factories, hospitals, schools and vacation centers. Fifteen projects will be accepted with a total generating capacity of 1 MWp, with preference given to those projects involving the development of new techniques, components and systems.

  7. FAA/NASA UAS Traffic Management Pilot Program (UPP)

    NASA Technical Reports Server (NTRS)

    Johnson, Ronald D.; Kopardekar, Parimal H.; Rios, Joseph L.

    2018-01-01

    NASA Ames is leading ATM R&D organization. NASA started working on UTM in 2012, it's come a long way primarily due to close relationship with FAA and industry. We have a research transition team between FAA and NASA for UTM. We have a few other RTTs as well. UTM is a great example of collaborative innovation, and now it's reaching very exciting stage of UTM Pilot Project (UPP). NASA is supporting FAA and industry to make the UPP most productive and successful.

  8. Crew Integration & Automation Testbed and Robotic Follower Programs

    DTIC Science & Technology

    2001-05-30

    Evolving Technologies for Reduced Crew Operation” Vehicle Tech Demo #1 (VTT) Vehicle Tech Demo #2 ( CAT ATD) Two Man Transition Future Combat...Simulation Advanced Electronic Architecture Concept Vehicle Shown with Onboard Safety Driver Advanced Interfaces CAT ATD Exit Criteria...Provide 1000 Hz control loop for critical real-time tasks CAT Workload IPT Process and Product Schedule Crew Task List Task Timelines Workload Analysis

  9. How Do Idaho Post-Secondary T&I Instructors Feel about Time-Shortened Tech-Prep Articulation?

    ERIC Educational Resources Information Center

    Rogers, George E.; Wilson, Ruth D.

    A study examined the acceptance of the time-shortened articulation (TSA) approach adopted to implement tech prep programs by Idaho postsecondary trade and industrial instructors. From a sample of 143 instructors, 46 usable responses were received. Hall's (1979) Stages of Concern (SoC) model was used to determine if they had accepted the process,…

  10. Project Data-Tech. Final Evaluation Report, 1993-1994. OER Report.

    ERIC Educational Resources Information Center

    Roman, Elliott M.

    Project Data-Tech was an Elementary and Secondary Education Act Title VII-funded project in its fifth and last year of operation at a high school in Brooklyn (New York). The program served a total of 131 Haitian- and Spanish-speaking students, most of whom were of limited English proficiency, 54 fewer than in the previous year. Participating…

  11. Computer Aided Drafting and Design, Industrial Manufacturing Technician, and Mechanical Engineering Technician and Machine Tool, Die and Moldmaking Technology. Tech Prep Competency Profile.

    ERIC Educational Resources Information Center

    Mid-East Ohio Tech Prep Consortium, Zanesville.

    This document contains competency profiles in four areas: computer-aided drafting and design; industrial manufacturing technician; mechanical engineering technician; and machine tool, die, and moldmaking technology occupations. The profiles are intended for use in articulating tech prep programs from high school through associate degrees in Ohio.…

  12. Gliders of World War II: ’The Bastards No One Wanted’

    DTIC Science & Technology

    2008-06-01

    BIBLIOGRAPHY Ammerman, Gale R . "An American Glider Pilot’s Story." Air Power History vol 46 no 1 (1999): 18-24. Barringer , Lewin Bennitt. Flight without...comments helped guide the research effort. Next, I would equally like to thank Dr. Richard R . Muller for encouraging me to consider the glider’s role...Field, November 1947), 2, as referenced in Janet R . Daly Bednarek, “American Combat Glider Program, 1941-1947: “Damned Fool Idea”,” Air Power

  13. Pilot testing of SHRP 2 reliability data and analytical products: Southern California.

    DOT National Transportation Integrated Search

    2015-01-01

    The second Strategic Highway Research Program (SHRP 2) has been investigating the critical subject of travel time reliability for several years. As part of this research, SHRP 2 supported multiple efforts to develop products to evaluate travel time r...

  14. Q & A with Ed Tech Leaders: Interview with John R. Savery

    ERIC Educational Resources Information Center

    Fulgham, Susan M.; Shaughnessy, Michael F.

    2014-01-01

    John R. Savery is Professor of Education and Director of Instructional Services at the University of Akron. His research and teaching interests focus on problem-based learning and technology-rich learning environments. As Director he supports faculty integration of instructional technology across the spectrum, from traditional classrooms to…

  15. Analysis of the Efficiency of an A-Posteriori Error Estimator for Linear Triangular Finite Elements

    DTIC Science & Technology

    1991-06-01

    Release 1.0, NOETIC Tech. Corp., St. Louis, Missouri, 1985. [28] R. VERFURTH, FEMFLOW-user guide. Version 1, Report, Universitiit Zirich, 1989. [29] R... study and research for foreign students in numerical mathematics who are supported by foreign governments or exchange agencies (Fulbright, etc

  16. Hydrographic Data from the Pilot Study of the Coastal Transition Zone (CTZ) Program, 15-28 June 1987

    DTIC Science & Technology

    1989-04-01

    8217i Wi Ui L6 LOlaa to LO to 0 a. ’U ’𔃺I’ N W Oa ON4’𔃺 C40 W4010404 r4 10 r% r - ’ : r a . ) - ’ : - : 0 ’n p 4 44 * t*- Ka 0I 0A I 0A 000)In "i pq m...OR 97331 Dr. Robert L. Smith 1 Dr. Adriana Huyer 1 Dr. P. Michael Kosro I Dr. Mark R. Abbott 1 Dr. John S. Allen I Dr. Tim Cowles 1 Dr. David Kadco

  17. Effectiveness of a physical activity program on weight, physical fitness, occupational stress, job satisfaction and quality of life of overweight employees in high-tech industries: a randomized controlled study.

    PubMed

    Fang, Yun-Ya; Huang, Chien-Yuan; Hsu, Mei-Chi

    2018-03-27

    This study aimed to examine the effectiveness of a physical activity (PA) program on weight control, physical fitness, occupational stress, job satisfaction and quality of life of overweight and sedentary employees in high-tech industries. Participants in the intervention group (n = 37) were instructed to carry out a PA program at moderate intensity for 60 min/session, 3 sessions/week for 12 weeks. Those in the control group (n = 38) received no PA program and were asked to continue their routine lifestyle. Evaluations were performed at baseline and at the end of the intervention. Results of structured questionnaires and blood biochemistry tests and evaluations of physical fitness were analyzed. The PA program effectively reduced the number of risk factors for metabolic syndrome and body fat percentage, and improved physical fitness such as flexibility, muscular strength and endurance and cardiorespiratory endurance. The intervention also significantly decreased levels of serum triglyceride, total cholesterol and low-density lipoprotein cholesterol. Significant positive effects on work control, interpersonal relationships at work, global job satisfaction and quality of life were also demonstrated. This study showed that a PA program can be helpful in improving physical, physiological and psychological outcomes for overweight and sedentary employees in high-tech industries.

  18. Steve Rummel | NREL

    Science.gov Websites

    Module Intercomparison," Proc. Solar Energies Technologies Review Meeting Nov. 7-10, 2005, NREL tech . Rummel, D.R. Myers, T.L. Stoffel, and D. Waddington, "A Comparison of Photovoltaic Calibration

  19. Small Business Intermediary Lending Pilot Program Act of 2010

    THOMAS, 111th Congress

    Rep. Kilroy, Mary Jo [D-OH-15

    2010-05-18

    05/20/2010 Sponsor introductory remarks on measure. (All Actions) Notes: For further action, see H.R.5297, which became Public Law 111-240 on 9/27/2010. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

  20. USAF/SCEEE Summer Faculty Research Program. Research Reports. Volume 1.

    DTIC Science & Technology

    1982-10-01

    in the early years included Bessie Coleman, first black ’woman pilot, Harriet Quimby, Matilde Moisant, Katherine and Marjorie Stinson, Ruth Law, and... Martinus Nijhoff. Cavallo, R. E., 1979b, (ed.), Systems Research Movement: Characteristics, Accomplishments and Current Developments, Special Issue of

  1. Overlay field application program, Pennsylvania US-119.

    DOT National Transportation Integrated Search

    2010-11-01

    The Concrete Overly Filed Application program is administered by FHWA and the National Concrete Pavement Technology Center (CP Tech Center). The overall objective of this program is to increase the awareness and knowledge of concrete overlay applicat...

  2. NASA Multidisciplinary Design and Analysis Fellowship Program

    NASA Technical Reports Server (NTRS)

    Schrage, D. P.; Craig, J. I.; Mavris, D. N.; Hale, M. A.; DeLaurentis, D.

    1999-01-01

    This report summarizes the results of a multi-year training grant for the development and implementation of a Multidisciplinary Design and Analysis (MDA) Fellowship Program at Georgia Tech. The Program funded the creation of graduate MS and PhD degree programs in aerospace systems design, analysis and integration. It also provided prestigious Fellowships with associated Industry Internships for outstanding engineering students. The graduate program has become the foundation for a vigorous and productive research effort and has produced: 20 MS degrees, 7 Ph.D. degrees, and has contributed to 9 ongoing Ph.D. students. The results of the research are documented in 32 publications (23 of which are included on a companion CDROM) and 4 annual student design reports (included on a companion CDROM). The legacy of this critical funding is the Center for Aerospace Systems Analysis at Georgia Tech which is continuing the graduate program, the research, and the industry internships established by this grant.

  3. Wood Products Analysis

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Structural Reliability Consultants' computer program creates graphic plots showing the statistical parameters of glue laminated timbers, or 'glulam.' The company president, Dr. Joseph Murphy, read in NASA Tech Briefs about work related to analysis of Space Shuttle surface tile strength performed for Johnson Space Center by Rockwell International Corporation. Analysis led to a theory of 'consistent tolerance bounds' for statistical distributions, applicable in industrial testing where statistical analysis can influence product development and use. Dr. Murphy then obtained the Tech Support Package that covers the subject in greater detail. The TSP became the basis for Dr. Murphy's computer program PC-DATA, which he is marketing commercially.

  4. DSMC (Defense Systems Management College) CALS (Computer-Aided Acquisition and Logistics Support) Briefing: Program Manager Course.

    DTIC Science & Technology

    1988-11-01

    library . o Air Force Tech Order Management System - Final Report, library o DLA CALS 1988 Implementation Plan, library . Where to go for Additional...0. ~l l LU; 0. 0 0 2. o 3 0 I) 0 U no V) 4- C 4. U) 00 u c.C0 Cco C Cl) cc m~0-CU . d" CD 0 m mooc Er.C 0 .0> s -w 2 c IM CO (aC wi E 0 r. X 0-0 a 0...as well as wider application. The Air Force AFTOMS Automation Plan, a copy of which is in the library , has excellent discussions of the expected

  5. Evaluating the Effectiveness of a Technology-Based Preschool Literacy Project: A Final Report of the LitTECH Outreach Project

    ERIC Educational Resources Information Center

    Johanson, Joyce; Bell, Carol; Daytner, Katrina

    2008-01-01

    Funded by the U.S. Department of Education's Office of Special Education Programs (OSEP), LitTECH Outreach was a 3-year technology-based preschool literacy project conducted by staff at the Center for Best Practices in Early Childhood, a research and development division of the College of Education and Human Services at Western Illinois…

  6. Exciting News From Va. Tech - Repaired Pallets May Be Stronger Than the Original

    Treesearch

    John W. Clarke; Marshall S. White; T.E. McLain; Philip A. Araman

    1995-01-01

    Virginia Tech, in cooperation with the NWPCA and the Southern Research Station of the USDA Forest Service, conducted a research program on the use of metal plates for repair of stringer pallets. This study looked at common stringer failure locations: splits between the notches, splits above the notches, and splits in the end feet. One of the research objectives was to...

  7. Meta-analysis of graduated driver licensing laws: effectiveness of specific program components : traffic tech.

    DOT National Transportation Integrated Search

    2015-11-01

    Graduated driver licensing (GDL) programs in the United States do not represent a single homogeneous intervention; rather, they contain different combinations and variations of program components. Programs vary by the duration of each stage of the GD...

  8. High Temperature Deformation Behavior of YBa2Cu3O6+x Superconducting Ceramic Materials

    DTIC Science & Technology

    1993-05-15

    Mocellin , High Tech. Ceramics, ed P. Vinvinzini, Pub. Elsevier Science Publisher (1986). 15. F. Wakai, S. Sakaguchi and M. Matsuno, Adv. Ceram. Mater...Soc., 68r101, 552 (1985). 18. C. Carry and A. Mocellin , J. Amer. Ceram. Soc., 69f91, C215 (1986). 19. P. C. Panda, E. R. Seydal and R. Raj, US Patent

  9. Expanding the seat belt program strategies toolbox: a starter kit for trying new program ideas : traffic tech.

    DOT National Transportation Integrated Search

    2016-10-01

    The National Highway Traffic Safety Administration has just : released a new resource for developing seat belt programs in : the traffic safety communityExpanding the Seat Belt Program : Toolbox: A Starter Kit for Trying New Program Ideas. : Resea...

  10. ECN-2409

    NASA Image and Video Library

    1970-06-17

    Not every moment of a test pilot's day is serious business. In a moment of levity, NASA pilots Bill Dana (left) and John A. Manke try to drag Air Force test pilot Peter Hoag away from the HL-10 lifting body while Air Force Major Jerauld R. Gentry helps from the cockpit. These four men were the principal pilots for the HL-10 program. This was not the only prank involving the HL-10 and its pilots. Once "Captain Midnight" (Gentry) and the "Midnight Skulkers" sneaked into the NASA hangar and put "U.S. Air Force" on the aircraft using stick-on letters. Later, while Gentry was making a lifting-body flight, his 1954 Ford was "borrowed" from the parking lot, painted with yellow-green zinc-chromate primer, and decorated with large stick-on flowers about one foot in diameter. After Gentry returned from the flight, he was surprised to see what had happened to his car.

  11. KSC-04pd1057

    NASA Image and Video Library

    2004-05-07

    KENNEDY SPACE CENTER, FLA. -- In the Space Shuttle Main Engine Shop at KSC, Boeing Tech Operations’ Team Manager Matthew McClelland (left) talks with STS-114 Pilot James Kelly. At right are Mission Specialists Wendy Lawrence and Charles Camarda. One of the main engines is in the background. Crew members are touring several areas on Center. The STS-114 mission is Logistics Flight 1, which is scheduled to deliver supplies and equipment plus the external stowage platform to the International Space Station.

  12. KSC-04PD-1057

    NASA Technical Reports Server (NTRS)

    2004-01-01

    KENNEDY SPACE CENTER, FLA. -- In the Space Shuttle Main Engine Shop at KSC, Boeing Tech Operations Team Manager Matthew McClelland (left) talks with STS-114 Pilot James Kelly. At right are Mission Specialists Wendy Lawrence and Charles Camarda. One of the main engines is in the background. Crew members are touring several areas on Center. The STS-114 mission is Logistics Flight 1, which is scheduled to deliver supplies and equipment plus the external stowage platform to the International Space Station.

  13. Texas Tech University's "Models of Teaching" over Satellite: A Description and Evaluation of College Credit Coursework Delivered via the TI-IN Interactive Satellite Network. A Report Submitted to the Office of the Academic Vice President.

    ERIC Educational Resources Information Center

    Platten, Marvin R.; Barker, Bruce O.

    The Texas Interactive Instructional Network (TI-IN), a private satellite system that provides one-way video and two-way audio communication, was used for a two-year pilot project which was conducted to determine if satellite instruction could be used successfully to share educational resources among institutions. Models of Teaching, a graduate…

  14. Model Variational Inverse Problems Governed by Partial Differential Equations

    DTIC Science & Technology

    2011-03-01

    COMSOL Multiphysics [10], deal.II [4], dune [5], the FEniCS project [11, 20] and Sundance, a package from the Trilinos project [17]. These toolkits...Dupont, J. Hoffman, C. Johnson, R. Kirby, M. Larson, A. Logg, and R. Scott, The FEniCS project, tech. rep., 2003. [12] S. C. Eisenstat and H. F

  15. Development of Synthesis and Large Scale Production Technology for Ultrahigh Energy and Density Fluoro-Organic Compounds

    DTIC Science & Technology

    2005-12-01

    M-I (H2C=CHSF5). To 3.5 g potassium hydroxide in 4 mL of water was added 10.5 mL of isopropanol in a 50 mL three-necked flask equipped with an...S- 5 2006 Ne Tech New Era Technology, Inc. 3720 NW 4 3rd Street, Suite 105, Gainesville, Florida 32606-6190, USA Final Report TITLE: Development of ...Senior Scientist, NeTech Research Institute (Subcontractor): University of Florida Dr. William R. Dolbier, Jr., P1 - University of Florida, Crow

  16. Development and implementation of a monitoring and information system to increase water use efficiency in arid and semi-arid areas in Limarí, Central Chile (WEIN)

    NASA Astrophysics Data System (ADS)

    Berger, Erich; Balmert, David; Richter, Jürgen

    2016-10-01

    The project WEIN was funded by the Federal Ministry of Education and Research (BMBF | Berlin, Germany) in the framework of the high-tech strategy of Germany's program "KMU-Innovativ". The project started in 2012 and was completed in 2014. In the scope of the project, an integrated system for analysis, monitoring and information at river basin level was developed, which provides relevant information for all stakeholders that are concerned with water resource issues. The main objective of the project was to improve water use efficiency and hence ensure the agricultural production in the region. The pilot region, in which this system was implemented, is the semi-arid Limarí basin in Northern Central Chile. One of the main parts of the project was the development and implementation of a web- and app-based irrigation water ordering and accounting system for local farmers.

  17. A Compendium of Energy Conservation Success Stories

    DOE R&D Accomplishments Database

    1988-09-01

    Three-quarters of DOE's Conservation R and D funds have been devoted to technology research and development: basic and applied research, exploratory R and D, engineering feasibility studies, pilot-scale prototype R and D, and technology demonstration. Non R and D projects have involved technology assessment program planning and analysis, model development, technology transfer and consumer information, health effects and safety research, and technical support for rule making. The success stories summarized in this compendium fall into three general categories: Completed Technology Success Stories, projects that have resulted in new energy-saving technologies that are presently being used in the private sector; Technical Success Stories, projects that have produced or disseminated important scientific/technical information likely to result in future energy savings; Program Success Stories, non-R and D activities that have resulted in nationally significant energy benefits. The Energy Conservation research and development program at DOE is managed by the Office of Conservation under the direction of the Deputy Assistant Secretary for Conservation. Three subordinate Program Offices correspond to the buildings, transportation, and industrial end-use sectors. A fourth subordinate Program Office{endash}Energy Utilization Research{endash}sponsors research and technical inventions for all end-use sectors.

  18. Where High-Tech Meets High-Touch: an example of effective cross-disciplinary collaboration in education

    NASA Astrophysics Data System (ADS)

    Holzhauer, B.; Mooney, M. E.

    2012-12-01

    How can non-formal education programs effectively blend hands-on, place-based field science lessons with technology and digital media to teach abstract global concepts in a local setting? Using climate change as an overarching concept, the Aldo Leopold Nature Center (ALNC) in Madison, WI, is developing exhibits and digital curricula, strengthened through partnerships with local and national experts from scientific and education fields, to effectively increase the public's interest in and understanding of science and technology, how the world works, and what we can do to adapt, mitigate, and innovate sustainable solutions. The exhibits and multimedia content, centered on topics such as climate, energy, weather, and phenology, have been developed in consultation with partners like the National Academy of Sciences and various departments at the University of Wisconsin (UW). Outdoor "high-touch" programs are complemented with "high-tech" exhibits and media, including touchscreen kiosks and the National Oceanic and Atmospheric Administration's (NOAA) Science On a Sphere® global display system, tying together multimedia experiences with peer-reviewed cutting-edge science to ensure maximum comprehension by appealing and connecting to learners of all ages and learning modalities. The curriculum is being developed in alignment with local and national education standards and science and climate literacy frameworks (such as "The Essential Principles of Climate Sciences," U.S. Global Change Research Program / U.S. Climate Change Science Program). Its digital format allows it to be easily adapted to visitors' learning styles and cognitive levels and updated with relevant new content such as real-time climate data or current visualizations from the UW Cooperative Institute for Meteorological Satellite Studies. Drawing upon ALNC's award-winning environmental education experiences, professional development networks such as NOAA's Climate Stewards Education Program, and existing resources for teaching through formal STEM education, ALNC has combined the unique benefits of place-based outdoor citizen-science in the community setting with digital, multimedia, and interactive components to address local, regional, and global scientific concepts with all audiences of all ages. This innovative, replicable and broadly accessible approach, geared towards formal school groups and the general public in a non-formal educational setting, is being piloted, evaluated, and disseminated through a variety of networks and professional development in order to serve as a model of continued collaborative education.;

  19. Enhancing STEM Education through Cubesats: Using Satellite Integration as a Teaching Tool at a Non-Tech School

    NASA Astrophysics Data System (ADS)

    Bernardes, S.; Cotten, D. L.

    2016-12-01

    University-based satellite programs have been successfully used as a platform for teaching STEM related fields, bringing tremendous benefits to graduate and undergraduate education. Considering their infrastructure and curricula, tech schools have traditionally been considered logical candidates for hosting such programs. More recently, with the dissemination of small satellites initiatives, non-tech schools have been presented the opportunity of developing satellite design and implementation programs. This work reports on the experiences and challenges associated with implementing a satellite program at the University of Georgia (UGA), a non-tech university. With funding from the Air Force Research Laboratory's (AFRL) University Nanosat Program (UNP) and NASA's Undergraduate Student Instrument Project (USIP) a team of undergraduates at UGA has recently been tasked with building two small satellites and helping to create a Small Satellite Research Laboratory (SSRL) at the university. Unique features of the satellite program at UGA include its team of students from a broad range of backgrounds and departments (Engineering, Computer Science, Art, Business, and Geography) and the previous exposure of many of these students to synergistic technologies, including arduino and unmanned aerial systems. We show how informal exposure to those technologies and willingness of students to focus on areas outside of their field of study can benefit from the implementation of satellite programs. In this regard, we report on methods and techniques used to find and recruit driven and knowledgeable students to work in a high paced field such as satellite system integration. We show how students and faculty from multiple departments have collaborated to reach a common, far reaching goal and describe our proposed methods to evaluate and measure educational goals based around SSRL and its projects. We also present the challenges associated with the lack of a developed engineering program, including our solutions to a shortage of equipment and expertise regarding building satellite systems and a satellite laboratory. Finally, we our outreach methods, including K-12, and share our experience and successes finding industry partners, considering an absence of background in the field and prior collaborations.

  20. Impact of R&D expenditures on research publications, patents and high-tech exports among European countries.

    PubMed

    Meo, S A; Usmani, A M

    2014-01-01

    This study aimed to compare the impact of Research&Development (R&D) expenditures on research publications, patents and high-tech exports among European countries. In this study, 47 European countries were included. The information regarding European countries, their per capita Gross Domestic Product (GDP), R&D spending, number of universities, indexed scientific journals, high technology exports and number of patents were collected. We recorded the total number of research documents in various science and social sciences subjects during the period 1996-2011. The main source for information was World Bank, Web of Science, Thomson Reuters and SCImago/Scopus. The mean GDP per capita for all the European countries is 23372.64 ± 3588.42 US$, yearly per capita spending on R&D 1.14 ± 0.13 US$, number of universities 48.17 ± 10.26, mean number of Institute of Scientific Information (ISI) indexed journal per country 90.72 ± 38.47, high technology exports 12.86 ± 1.59 and number of patent applications 61504.23 ± 22961.85. The mean of research documents published in various science and social science subjects among all the European countries during the period 1996-2011 is 213405.70 ± 56493.04. Spending on R&D, number of universities, indexed journals, high technology exports and number of patents have a positive correlation with number of published documents in various science and social science subjects. We found a positive correlation between patent application and high-tech exports. However, there was no association between GDP per capita and research outcomes. It is concluded that, the most important contributing factors towards a knowledge based economy are spending on R&D, number of universities, scientific indexed journals and research publications, which in turn give a boast to patents, high technology exports and ultimately GDP.

  1. 49 CFR 381.400 - What is a pilot program?

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 5 2011-10-01 2011-10-01 false What is a pilot program? 381.400 Section 381.400... PILOT PROGRAMS Initiation of Pilot Programs § 381.400 What is a pilot program? (a) A pilot program is a... that would be subject to the regulations. (b) During a pilot program, the participants would be given...

  2. 49 CFR 381.400 - What is a pilot program?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false What is a pilot program? 381.400 Section 381.400... PILOT PROGRAMS Initiation of Pilot Programs § 381.400 What is a pilot program? (a) A pilot program is a... that would be subject to the regulations. (b) During a pilot program, the participants would be given...

  3. HL-10 on lakebed with Jerauld R. Gentry, Peter Hoag, John A. Manke, and Bill Dana

    NASA Technical Reports Server (NTRS)

    1969-01-01

    The four principal HL-10 pilots are seen here with the lifting body aircraft. They are, left to right; Air Force Major Jerauld R. Gentry, Air Force test pilot Peter Hoag, and NASA pilots John A. Manke and Bill Dana. All are wearing the pressure suits needed for flying above 50,000 feet. The HL-10 was one of five heavyweight lifting-body designs flown at NASA's Flight Research Center (FRC--later Dryden Flight Research Center), Edwards, California, from July 1966 to November 1975 to study and validate the concept of safely maneuvering and landing a low lift-over-drag vehicle designed for reentry from space. Northrop Corporation built the HL-10 and M2-F2, the first two of the fleet of 'heavy' lifting bodies flown by the NASA Flight Research Center. The contract for construction of the HL-10 and the M2-F2 was $1.8 million. 'HL' stands for horizontal landing, and '10' refers to the tenth design studied by engineers at NASA's Langley Research Center, Hampton, Va. After delivery to NASA in January 1966, the HL-10 made its first flight on Dec. 22, 1966, with research pilot Bruce Peterson in the cockpit. Although an XLR-11 rocket engine was installed in the vehicle, the first 11 drop flights from the B-52 launch aircraft were powerless glide flights to assess handling qualities, stability, and control. In the end, the HL-10 was judged to be the best handling of the three original heavy-weight lifting bodies (M2-F2/F3, HL-10, X-24A). The HL-10 was flown 37 times during the lifting body research program and logged the highest altitude and fastest speed in the Lifting Body program. On Feb. 18, 1970, Air Force test pilot Peter Hoag piloted the HL-10 to Mach 1.86 (1,228 mph). Nine days later, NASA pilot Bill Dana flew the vehicle to 90,030 feet, which became the highest altitude reached in the program. Some new and different lessons were learned through the successful flight testing of the HL-10. These lessons, when combined with information from it's sister ship, the M2-F2/F3, provided an excellent starting point for designers of future entry vehicles, including the Space Shuttle.

  4. CIDR

    Science.gov Websites

    CIDR Program Contacts NIH CIDR Program Application Information Barbara Thomas, Ph.D. Scientific Review | Site Map | Get Adobe Reader Subscribe to CIDR News photo of lab tech A Research Technologist examines a

  5. Configuring The REU Experience To Maximize Student Collaboration

    NASA Astrophysics Data System (ADS)

    Majkowski, L.; Pullin, M. J.

    2012-12-01

    The New Mexico Tech NSF-funded REU Program, Interdisciplinary Science for the Environment (ISE), hosted six cohorts of students between 2005 and 2010. The program ran for eight weeks during the first cycle and nine weeks during the second cycle, bringing in an average of twelve student participants per year. Students were provided with a stipend, food allowance, travel from home to New Mexico Tech, and free campus housing. The program sponsored weekend group field trips to scientific, environmental, and cultural sites of significance in New Mexico. For the second cycle, the ISE shared some programmatic elements with the New Mexico EPSCoR Undergraduate Research Opportunities Program (UROP). The majority of the research projects focused on the geosciences, with interdepartmental participation from researchers in earth science, hydrology, chemistry, environmental science, and biology. The ISE adopted a non-traditional approach to matching student participants with research projects and faculty mentors. Students were selected from different disciplines to work together in pairs on each project. This model provided the students with a peer collaborator in addition to the guidance of their faculty mentors and support from graduate students associated with the different projects. The focus on cohort, both within the individual research projects and each year's group, enabled and enhanced the students' critical thinking, problem-solving and teamwork skills. Students would routinely seek out the advice of their peers when they hit a roadblock in their research. This collaboration also occurred across the boundaries of the ISE and UROP cohorts. Long-term follow up has shown that a significant number of the student participants have continued on to graduate school. Students credit the program with developing their capacity to work on complex problems in an interdisciplinary group environment. Additionally, many students have continued contact with their research partners, faculty mentors and other members of their REU cohort.

  6. Modifying the Sleep Treatment Education Program for Students to include technology use (STEPS-TECH): Intervention effects on objective and subjective sleep outcomes.

    PubMed

    Barber, Larissa K; Cucalon, Maria S

    2017-12-01

    University students often have sleep issues that arise from poor sleep hygiene practices and technology use patterns. Yet, technology-related behaviors are often neglected in sleep hygiene education. This study examined whether the Sleep Treatment Education Program for Students-modified to include information regarding managing technology use (STEPS-TECH)-helps improve both subjective and objective sleep outcomes among university students. Results of an experimental study among 78 university students showed improvements in objective indicators of sleep quantity (total sleep time) and sleep quality (less awakenings) during the subsequent week for students in the STEPS-TECH intervention group compared to a control group. Exploratory analyses indicated that effects were driven by improvements in weekend days immediately following the intervention. There were also no intervention effects on subjective sleep quality or quantity outcomes. In terms of self-reported behavioral responses to educational content in the intervention, there were no group differences in sleep hygiene practices or technology use before bedtime. However, the intervention group reported less technology use during sleep periods than the control group. These preliminary findings suggest that STEPS-TECH may be a useful educational tool to help improve objective sleep and reduce technology use during sleep periods among university students. Copyright © 2017 John Wiley & Sons, Ltd.

  7. Saturn Apollo Program

    NASA Image and Video Library

    1971-07-26

    The fifth marned lunar landing mission, Apollo 15 (SA-510), carrying a crew of three astronauts: Mission commander David R. Scott, Lunar Module pilot James B. Irwin, and Command Module pilot Alfred M. Worden Jr., lifted off on July 26, 1971. Astronauts Scott and Irwin were the first to use a wheeled surface vehicle, the Lunar Roving Vehicle, or the Rover, which was designed and developed by the Marshall Space Flight Center, and built by the Boeing Company. Astronauts spent 13 days, nearly 67 hours, on the Moon's surface to inspect a wide variety of its geological features.

  8. 34 CFR 400.2 - What programs are governed by these regulations?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 407). (b) National discretionary programs. (1) Indian Vocational Education Program (34 CFR part 401). (2) Native Hawaiian Vocational Education Program (34 CFR part 402). (3) National Tech-Prep Education...). (8) National Network for Curriculum Coordination in Vocational and Technical Education (34 CFR part...

  9. Hypergol Maintenance Facility Hazardous Waste South Staging Areas, SWMU 070 Corrective Measures Implementation

    NASA Technical Reports Server (NTRS)

    Miller, Ralinda R.

    2016-01-01

    This document presents the Corrective Measures Implementation (CMI) Year 10 Annual Report for implementation of corrective measures at the Hypergol Maintenance Facility (HMF) Hazardous Waste South Staging Areas at Kennedy Space Center, Florida. The work is being performed by Tetra Tech, Inc., for the National Aeronautics and Space Administration (NASA) under Indefinite Delivery Indefinite Quantity (IDIQ) NNK12CA15B, Task Order (TO) 07. Mr. Harry Plaza, P.E., of NASA's Environmental Assurance Branch is the Remediation Project Manager for John F. Kennedy Space Center. The Tetra Tech Program Manager is Mr. Mark Speranza, P.E., and the Tetra Tech Project Manager is Robert Simcik, P.E.

  10. SunShot Identity Video

    ScienceCinema

    Le, Minh; Resch, Rhone

    2018-05-01

    Highlights of the SunShot program, the national targets for the program, and the "all of the above" approach to achieving those goals through research, tech transfer, permitting, tax incentives, and a comprehensive approach to installation.

  11. SunShot Identity Video

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Le, Minh; Resch, Rhone

    Highlights of the SunShot program, the national targets for the program, and the "all of the above" approach to achieving those goals through research, tech transfer, permitting, tax incentives, and a comprehensive approach to installation.

  12. The First ECPD Accredited Environmental B. Tech. Program

    ERIC Educational Resources Information Center

    Rowe, Donald R.; Russell, John P.

    1975-01-01

    Describes the first bachelor of science program in environmental engineering technology, with objectives of providing adequate training in the control of air, water, and land pollution. Includes a four-year curriculum plan. (MLH)

  13. NASA tech brief evaluations

    NASA Technical Reports Server (NTRS)

    Workman, Gary L.

    1994-01-01

    A major step in transferring technology is to disseminate information about new developments to the appropriate sector(s). A useful vehicle for transferring technology from the government sector to industry has been demonstrated with the use of periodical and journal announcements to highlight technological achievements which may meet the needs of industries other than the one who developed the innovation. To meet this end, NASA has very successfully pursued the goal of identifying technical innovations through the national circulation publication; NASA Tech Briefs. At one time the Technology Utilization Offices of the various centers coordinated the selection of appropriate technologies through a common channel. In recent years, each NASA field center has undertaken the task of evaluating submittals for Tech Brief publication independently of the others. The University of Alabama in Huntsville was selected to assist MSFC in evaluating technology developed under the various programs managed by the NASA center for publication in the NASA Tech Briefs journal. The primary motivation for the NASA Tech Briefs publication is to bring to the attention of industry the various NASA technologies which, in general, have been developed for a specific aerospace requirement, but has application in other areas. Since there are a number of applications outside of NASA that can benefit from innovative concepts developed within the MSPC programs, the ability to transfer technology to other sectors is very high. In most cases, the innovator(s) are not always knowledgeable about other industries which might potentially benefit from their innovation. The evaluation process can therefore contribute to the list of potential users through a knowledgeable evaluator.

  14. Experimental particle physics research at Texas Tech University

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Akchurin, Nural; Lee, Sung-Won; Volobouev, Igor

    The high energy physics group at Texas Tech University (TTU) concentrates its research efforts on the Compact Muon Solenoid (CMS) experiment at the Large Hadron Collider (LHC) and on generic detector R&D for future applications. Our research programs have been continuously supported by the US Department of Energy for over two decades, and this final report summarizes our achievements during the last grant period from May 1, 2012 to March 31, 2016. After having completed the Run 1 data analyses from the CMS detector, including the discovery of the Higgs boson in July 2012, we concentrated on commissioning the CMSmore » hadron calorimeter (HCAL) for Run 2, performing analyses of Run 2 data, and making initial studies and plans for the second phase of upgrades in CMS. Our research has primarily focused on searches for Beyond Standard Model (BSM) physics via dijets, monophotons, and monojets. We also made significant contributions to the analyses of the semileptonic Higgs decays and Standard Model (SM) measurements in Run 1. Our work on the operations of the CMS detector, especially the performance monitoring of the HCAL in Run 1, was indispensable to the experiment. Our team members, holding leadership positions in HCAL, have played key roles in the R&D, construction, and commissioning of these detectors in the last decade. We also maintained an active program in jet studies that builds on our expertise in calorimetry and algorithm development. In Run 2, we extended some of our analyses at 8 TeV to 13 TeV, and we also started to investigate new territory, e.g., dark matter searches with unexplored signatures. The objective of dual-readout calorimetry R&D was intended to explore (and, if possible, eliminate) the obstacles that prevent calorimetric detection of hadrons and jets with a comparable level of precision as we have grown accustomed to for electrons and photons. The initial prototype detector was successfully tested at the SPS/CERN in 2003-2004 and evolved over the last decade. In 2012-2015, several other prototypes were built to further reduce leakage fluctuations, improve Cherenkov light yield, increase fiber attenuation length, and other related phenomena. During this grant period, we graduated two students with Ph.D. degrees, and five undergraduate students from our labs went on to prestigious graduate programs in the US and Europe. Also, the TTU HEP team has participated in the QuarkNet program every year since 2001. We are dedicated to working with area teachers and students at all levels and to training the next generation of scientists. Over 20 high school teachers have participated in our program since its inception.« less

  15. CENDI Indexing Workshop

    NASA Technical Reports Server (NTRS)

    1994-01-01

    The CENDI Indexing Workshop held at NASA Headquarters, Two Independence Square, 300 E Street, Washington, DC, on September 21-22, 1994 focused on the following topics: machine aided indexing, indexing quality, an indexing pilot project, the MedIndEx Prototype, Department of Energy/Office of Scientific and Technical Information indexing activities, high-tech coding structures, category indexing schemes, and the Government Information Locator Service. This publication consists mostly of viewgraphs related to the above noted topics. In an appendix is a description of the Government Information Locator Service.

  16. Best practices for achieving and measuring pavement smoothness, a synthesis of state-of-practice : [tech summary].

    DOT National Transportation Integrated Search

    2015-04-01

    The RAC Region II has initiated a collaborative research program consortium : through the Transportation Pooled Fund (TPF) Program. The research program is : called the Southeast Transportation Consortium (STC) and is intended to encourage : coordina...

  17. Broadening Awareness and Participation in the Geosciences Among Underrepresented Minorities in STEM

    NASA Astrophysics Data System (ADS)

    Blake, R.; Liou-Mark, J.

    2012-12-01

    An acute STEM crisis exists nationally, and the problem is even more dire among the geosciences. Since about the middle of the last century, fewer undergraduate and graduate degrees have been granted in the geosciences than in any other STEM fields. To help in ameliorating this geoscience plight, particularly from among members of racial and ethnic groups that are underrepresented in STEM fields, the New York City College of Technology (City Tech) launched a vibrant geoscience program and convened a community of STEM students who are interested in learning about the geosciences. This program creates and introduces geoscience knowledge and opportunities to a diverse undergraduate student population that was never before exposed to geoscience courses at City Tech. This geoscience project is funded by the NSF OEDG program, and it brings awareness, knowledge, and geoscience opportunities to City Tech's students in a variety of ways. Firstly, two new geoscience courses have been created and introduced. One course is on Environmental Remote Sensing, and the other course is an Introduction to the Physics of Natural Disasters. The Remote Sensing course highlights the physical and mathematical principles underlying remote sensing techniques. It covers the radiative transfer equation, atmospheric sounding techniques, interferometric and lidar systems, and an introduction to image processing. Guest lecturers are invited to present their expertise on various geoscience topics. These sessions are open to all City Tech students, not just to those students who enroll in the course. The Introduction to the Physics of Natural Disasters course is expected to be offered in Spring 2013. This highly relevant, fundamental course will be open to all students, especially to non-science majors. The course focuses on natural disasters, the processes that control them, and their devastating impacts to human life and structures. Students will be introduced to the nature, causes, risks, effects, and prediction of natural disasters including earthquakes, volcanoes, tsunamis, landslides, subsidence, global climate change, severe weather, coastal erosion, floods, mass extinctions, wildfires, and meteoroid impacts. In addition to the brand new geoscience course offerings, City Tech students participate in geoscience - seminars, guest lectures, lecture series, and geoscience internship and fellowship workshops. The students also participate in geoscience exposure trips to NASA/GISS Columbia University, NOAA-CREST, and the Brookhaven National Laboratory. Moreover, the undergrads are provided opportunities for paid research internships via two NSF grants - NSF REU and NSF STEP. Geoscience projects are also integrated into course work, and students make geoscience group project presentations in class. Students also participate in geoscience career and graduate school workshops. The program also creates geoscience articulation agreements with the City College of New York so that students at City Tech may pursue Bachelor's and advanced degrees in the geosciences. This program is supported by NSF OEDG grant #1108281.

  18. HL-10 on lakebed with pilot Major Jerauld R. Gentry

    NASA Technical Reports Server (NTRS)

    1968-01-01

    Pilot Major Jerauld R. Gentry stands in front of the HL-10 Lifting Body. Gentry was the Air Force project pilot for the HL-10 while it was making the early glide and powered flights in 1968 following its modification. He made a total of nine flights in the vehicle. For his work on the HL-10, Gentry was awarded the Harmon International Trophy for his outstanding contribution to the science of flying. He later became the Air Force pilot for the X-24A. The HL-10 was one of five heavyweight lifting-body designs flown at NASA's Flight Research Center (FRC--later Dryden Flight Research Center), Edwards, California, from July 1966 to November 1975 to study and validate the concept of safely maneuvering and landing a low lift-over-drag vehicle designed for reentry from space. Northrop Corporation built the HL-10 and M2-F2, the first two of the fleet of 'heavy' lifting bodies flown by the NASA Flight Research Center. The contract for construction of the HL-10 and the M2-F2 was $1.8 million. 'HL' stands for horizontal landing, and '10' refers to the tenth design studied by engineers at NASA's Langley Research Center, Hampton, Va. After delivery to NASA in January 1966, the HL-10 made its first flight on Dec. 22, 1966, with research pilot Bruce Peterson in the cockpit. Although an XLR-11 rocket engine was installed in the vehicle, the first 11 drop flights from the B-52 launch aircraft were powerless glide flights to assess handling qualities, stability, and control. In the end, the HL-10 was judged to be the best handling of the three original heavy-weight lifting bodies (M2-F2/F3, HL-10, X-24A). The HL-10 was flown 37 times during the lifting body research program and logged the highest altitude and fastest speed in the Lifting Body program. On Feb. 18, 1970, Air Force test pilot Peter Hoag piloted the HL-10 to Mach 1.86 (1,228 mph). Nine days later, NASA pilot Bill Dana flew the vehicle to 90,030 feet, which became the highest altitude reached in the program. Some new and different lessons were learned through the successful flight testing of the HL-10. These lessons, when combined with information from it's sister ship, the M2-F2/F3, provided an excellent starting point for designers of future entry vehicles, including the Space Shuttle.

  19. 34 CFR 406.1 - What is the State-Administered Tech-Prep Education Program?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... provides financial assistance for— (a) Planning and developing four-year or six-year programs designed to...) Planning and developing, in a systematic manner, strong, comprehensive links between secondary schools and...

  20. FHWA LTBP Industry Day

    DOT National Transportation Integrated Search

    2014-02-01

    This TechBrief summarizes Long-Term Bridge Performance (LTBP) Industry Day, held July 16, 2012, a public meeting sponsored by the Federal Highway Administrations (FHWA) LTBP Program. Industry Day provided a platform for the LTBP Program to activel...

  1. Connected commercial vehicles-integrated truck project : data acquisition system (DAS) documentation.

    DOT National Transportation Integrated Search

    1996-08-01

    The report documents work performed under the FTA Advanced Public Transportation Systems (APTS) Program, a program structured to undertake research and development of innovative applications of advanced navigation, information, and communication tech...

  2. Low-cost rural surface alternatives : tech transfer summary.

    DOT National Transportation Integrated Search

    2013-12-01

    Freezing-thawing action induces physical changes to granular surface : roads that can negatively impact public users, reduce emergency : responder access/time, and result in maintenance costs for secondary : road departments. Stabilization can help r...

  3. 76 FR 62813 - Pilot Program To Evaluate Proposed Proprietary Name Submissions; Public Meeting on Pilot Program...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-11

    ...] Pilot Program To Evaluate Proposed Proprietary Name Submissions; Public Meeting on Pilot Program Results... voluntary pilot program that enabled participating pharmaceutical firms to evaluate proposed proprietary... public meeting at the end of fiscal year 2011 to discuss the results of the pilot program, but the Agency...

  4. Scientific Toy

    NASA Technical Reports Server (NTRS)

    1989-01-01

    Tensegritoy, inspired by the tensegrity concepts of R. Buckminster Fuller, is an erector set like toy designed to give students an understanding of structural stability. It is used by children, architects, engineers, and teachers. The manufacturer, Tensegrity Systems Corporation, also offers a collapsible point of purchase display which incorporates technology developed for space station trusses described in "NASA Tech Briefs." The tech brief described deployable trusses that can be collapsed into small packages for space shuttle transport, then unfolded in space. As a result, the display occupies a minimum amount of floor space, freight cost savings are substantial and assembly can be completed quickly.

  5. The Milliken/Georgia Tech Rising Senior Summer Program.

    ERIC Educational Resources Information Center

    Agrawal, Pradeep K; Sommerfeld, Jude T.

    1987-01-01

    Describes the Rising Senior Program at the Georgia Institute of Technology, which is a cooperative education program designed to provide student interns with an opportunity to apply engineering principles to real problems related to the business interests of the Milliken textile manufacturing company. (TW)

  6. The psychophysiological assessment method for pilot's professional reliability.

    PubMed

    Zhang, L M; Yu, L S; Wang, K N; Jing, B S; Fang, C

    1997-05-01

    Previous research has shown that a pilot's professional reliability depends on two relative factors: the pilot's functional state and the demands of task workload. The Psychophysiological Reserve Capacity (PRC) is defined as a pilot's ability to accomplish additive tasks without reducing the performance of the primary task (flight task). We hypothesized that the PRC was a mirror of the pilot's functional state. The purpose of this study was to probe the psychophysiological method for evaluating a pilot's professional reliability on a simulator. The PRC Comprehensive Evaluating System (PRCCES) which was used in the experiment included four subsystems: a) quantitative evaluation system for pilot's performance on simulator; b) secondary task display and quantitative estimating system; c) multiphysiological data monitoring and statistical system; and d) comprehensive evaluation system for pilot PRC. Two studies were performed. In study one, 63 healthy and 13 hospitalized pilots participated. Each pilot performed a double 180 degrees circuit flight program with and without secondary task (three digit operation). The operator performance, score of secondary task and cost of physiological effort were measured and compared by PRCCES in the two conditions. Then, each pilot's flight skill in training was subjectively scored by instructor pilot ratings. In study two, 7 healthy pilots volunteered to take part in the experiment on the effects of sleep deprivation on pilot's PRC. Each participant had PRC tested pre- and post-8 h sleep deprivation. The results show that the PRC values of a healthy pilot was positively correlated with abilities of flexibility, operating and correcting deviation, attention distribution, and accuracy of instrument flight in the air (r = 0.27-0.40, p < 0.05), and negatively correlated with emotional anxiety in flight (r = -0.40, p < 0.05). The values of PRC in healthy pilots (0.61 +/- 0.17) were significantly higher than that of hospitalized pilots (0.43 +/- 0.15) (p < 0.05). The PRC value after 8 h sleep loss (0.50 +/- 0.17) was significantly lower than those before sleep loss (0.70 +/- 0.15) (p < 0.05). We conclude that a pilot's PRC, which was closely related to flight ability and functional state, could partly represent the pilot's professional reliability. It is worthwhile to further research using a pilot's PRC as a predictor of mental workload in aircraft design.

  7. Radiation-Hardened N(+) Gate CMOS/SOS.

    DTIC Science & Technology

    1981-05-01

    Attn: Donald J Meeker L-545 Hanscom AFB, MA 01731 Attn: Tech Info Dept L-3 Attn: ES/A Kahan Attn: F K Miller L-156 Attn: ES/B Buchanan Attn: William J...Tempo-Center for Advanced Studies Attn: Donald R McMorrow/MS-G30 816 State St (P 0 Drawer QQ) Attn: Samuel R Crawford/MS-531 Santa Barbara, CA 93102...Jerry I Lubell Attn: Research Lib 6617 J R McKee -- r Attn: J E Goodwin/Mail 0452 Attn: John R Hoffman Attn: B T Graham/MS PO-454 Attn: Donald H Bryce

  8. 78 FR 9936 - Federal Housing Administration (FHA): PowerSaver Home Energy Retrofit Loan Pilot Program...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-12

    ... Administration (FHA): PowerSaver Home Energy Retrofit Loan Pilot Program: Extension of Pilot Program AGENCY...: On March 31, 2011, HUD published a notice that announced HUD's FHA Home Energy Retrofit Loan Pilot Program (Retrofit Pilot Program) known as FHA PowerSaver, which is a pilot program conducted for loans...

  9. SciTech Clubs for Girls. [Annual] technical report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nogal, A.M.

    1993-02-01

    Since January 1992, 9 exhibits have been constructed by the SciTech Clubs for Girls, which involved 63 girls, ages 10 to 14. These exhibits are: Bubble Shapes by the St. Charles Cadette Girl Scout Troop No. 109. Density Games by the South Elgin Cadette Girl Scout Troop No. 132. Electric Fleas by the Warrenville Junior Girl Scout Troop No. 305. Energy vs. Power by the Aurora Junior Girl Scout Troop No. 242. The Organ Pipe by the Bartlett Junior Girl Scout Troop No. 107. Ohm`s Law by the Geneva Junior Girl Scout Troop No. 401. What is Gravity by themore » Pilsen YMCA girls. Insulation at Work by the Algonquin Junior Girl Scout Troop No. 303. Series vs. Parallel by the Leland Junior Girl Scout Troop No. 50. The report is a description of each exhibit and the group that built the exhibit. Each group had a minimum of 10 hours of contact time at SciTech with the SciTech Clubs for Girls Program Coordinator. All mentors are female. Each exhibit building experience includes a trip to the hardware store to purchase supplies. After the exhibit is complete, the girls receive certificates of achievement and a SciTech Club Patch.« less

  10. Bacterial synthesis gas (syngas) fermentation.

    PubMed

    Bengelsdorf, Frank R; Straub, Melanie; Dürre, Peter

    2013-01-01

    Acetogenic bacteria employing the Wood-Ljungdahl pathway can be used as biocatalysts in syngas fermentation for the production ofbiofuels such as ethanol or butanol as well as biocommodities such as acetate, lactate, butyrate, 2,3 butanediol, and acetone. The potential of such processes can be projected by the global syngas output, which was 70,817 megawatts thermal in 2010 and is expected to increase up to 72% in 2016. To date, different acetogens are used as commercial production strains for industrial syngas fermentations in pilot or demonstration plants (Coskata, INEOS Bio, LanzaTech) and first commercial units are expected to launch operation in the near future (INEOS Bio, LanzaTech). Considerations on potential yields are quite promising for fermentative production. New methods for metabolic engineering were established to construct novel recombinant acetogenic biocatalysts. Synthetic biology will certainly play a major role in constructing strains for commercial operations. This way, a cheap and abundant carbon source most probably replace, processes based on crude oil or sugar in the near future.

  11. Like No Business We Know...

    ERIC Educational Resources Information Center

    Cutshall, Sandy

    2003-01-01

    Describes several programs in entertainment technology: the AV Tech Online Project, a curriculum for audiovisual technology career preparation and certification; a program for careers in the music recording industry; and another preparing students in digital visual media and sound. (JOW)

  12. Planning for organization development in operations control centers.

    DOT National Transportation Integrated Search

    2012-06-01

    The first step in a proposed program of organization development (OD) was to assess organizational processes within the : Technical Operations Services (TechOps) Operations Control Centers (OCCs). The aim of the OD program was to : improve effectiven...

  13. Hypersonic missile propulsion system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kazmar, R.R.

    1998-11-01

    Pratt and Whitney is developing the technology for hypersonic components and engines. A supersonic combustion ramjet (scramjet) database was developed using hydrogen fueled propulsion systems for space access vehicles and serves as a point of departure for the current development of hydrocarbon scramjets. The Air Force Hypersonic Technology (HyTech) Program has put programs in place to develop the technologies necessary to demonstrate the operability, performance and structural durability of an expendable, liquid hydrocarbon fueled scramjet system that operates from Mach 4 to 8. This program will culminate in a flight type engine test at representative flight conditions. The hypersonic technologymore » base that will be developed and demonstrated under HyTech will establish the foundation to enable hypersonic propulsion systems for a broad range of air vehicle applications from missiles to space access vehicles. A hypersonic missile flight demonstration is planned in the DARPA Affordable Rapid Response Missile Demonstrator (ARRMD) program in 2001.« less

  14. Small Business Intermediary Lending Pilot Program Act of 2009

    THOMAS, 111th Congress

    Sen. Levin, Carl [D-MI

    2009-11-17

    Senate - 11/17/2009 Read twice and referred to the Committee on Small Business and Entrepreneurship. (All Actions) Notes: For further action, see H.R.5297, which became Public Law 111-240 on 9/27/2010. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

  15. Connecting Japanese Companies with Global Ventures. Case Study

    ERIC Educational Resources Information Center

    Kuwahara, Yutaka

    2004-01-01

    After more than 13 years of business slump in Japan and worldwide, many high-tech companies are struggling to remain competitive. Faced with the need to stay profitable, a common response of such companies in Japan has been to cut their investment in R&D. Heavy cuts in R&D have led to a lack of innovation, with the associated threat to future…

  16. First Apollo 11 Lunar Samples Arrive at the Manned Spacecraft Center (MSC)

    NASA Technical Reports Server (NTRS)

    1969-01-01

    The Apollo 11 mission, the first manned lunar mission, launched from the Kennedy Space Center, Florida via the Marshall Space Flight Center (MSFC) developed Saturn V launch vehicle on July 16, 1969 and safely returned to Earth on July 24, 1969. Aboard the space craft were astronauts Neil A. Armstrong, commander; Michael Collins, Command Module (CM) pilot; and Edwin E. Aldrin Jr., Lunar Module (LM) pilot. The CM, piloted by Michael Collins remained in a parking orbit around the Moon while the LM, named 'Eagle'', carrying astronauts Neil Armstrong and Edwin Aldrin, landed on the Moon. During 2½ hours of surface exploration, the crew collected 47 pounds of lunar surface material for analysis back on Earth. This photograph was taken as the mission's first loaded sample return container arrived at Ellington Air Force Base by air from the Pacific recovery area. The rock box was immediately taken to the Lunar Receiving Laboratory at the Manned Spacecraft Center (MSC) in Houston, Texas. Happily posing for the photograph with the rock container are (L-R) Richard S. Johnston (back), special assistant to the MSC Director; George M. Low, MSC Apollo Spacecraft Program manager; George S. Trimble (back), MSC Deputy Director; Lt. General Samuel C. Phillips, Apollo Program Director, Office of Manned Spaceflight at NASA headquarters; Eugene G. Edmonds, MSC Photographic Technology Laboratory; Dr. Thomas O. Paine, NASA Administrator; and Dr. Robert R. Gilruth, MSC Director.

  17. USAF Summer Research Program - 1993 Summer Research Extension Program Final Reports, Volume 2, Phillips Laboratory

    DTIC Science & Technology

    1994-11-01

    Research Extension Program Phillips Laboratory Kirtland Air Force Base Sponsored by: Air Force Office of Scientific Research Boiling Air Force Base...Program Phillips Laboratory Sponsored by: Air Force Office of Scientific Research Bolling Air Force Base, Washington, D.C. and Arkansas Tech University...Summer Research Extension Program (SREP) Phillips

  18. Mississippi Curriculum Framework for Surgical Technology Programs (CIP: 51.0909--Surgical/Operating Room Tech.). Postsecondary Programs.

    ERIC Educational Resources Information Center

    Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

    This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the surgical technology program. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies for the program,…

  19. Mississippi Curriculum Framework for Automotive Technology Programs (CIP: 47.0604--Automotive Mechanic/Tech.). Postsecondary Programs.

    ERIC Educational Resources Information Center

    Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

    This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the automotive technology programs cluster. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies, and…

  20. Mississippi Curriculum Framework for Automotive Mechanics (Program CIP: 47.0604--Auto/Automotive Mechanic/Tech). Secondary Programs.

    ERIC Educational Resources Information Center

    Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

    This document, which reflects Mississippi's statutory requirement that instructional programs be based on core curricula and performance-based assessment, contains outlines of the instructional units required in local instructional management plans and daily lesson plans for automotive mechanics I and II. Presented first are a program description…

  1. Industrial Equipment Survival/Recovery Feasibility Program during Event DICE THROW

    DTIC Science & Technology

    1976-12-31

    WE i ° t S~DEFINITIONS OF TERMS AND ACRONYMS •’AFB Air Force Base • •ANFO Ammonium nitrate fuel oil explosive. SChimneying Falling of material from...tank half full and transmission at normal oil level. (For best orotection all tanks should be completely full.) 2. Mechanical/electrical calculator. 3...3263 Chief of Naval Research ATTN: Code 533, Tech. Library ATTN: Code 464, Jacob L. Warner ATTN: Carl Austin ATTN: Nicholas Perrone ATTN: Tech

  2. Rapid Prototyping of Application Specific Signal Processors (RASSP)

    DTIC Science & Technology

    1993-12-23

    Compilers 2-9 - Cadre Teamwork 2-13 - CodeCenter (Centerline) 2-15 - dbx/dbxtool (UNIXm) 2-17 - Falcon (Mentor) 2-19 - FrameMaker (Frame Tech) 2-21 - gprof...UNIXm C debuggers Falcon Mentor ECAD Framework FrameMaker Frame Tech Word Processing gcc GNU CIC++ compiler gprof GNU Software profiling tool...organization can put their own documentation on-line using the BOLD Com- poser for Framemaker . " The AMPLE programming language is a C like language used for

  3. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Piilonen, Leo; Takeuchi, Tatsu; Minic, Djordje

    This is the final report of DOE Grant DE-FG05-92ER40709 awarded to the Virginia Tech high energy physics group. It covers the period February 1, 2010 through April 30, 2013. The high energy physics program at Virginia Tech supported by this grant is organized into three tasks: A for theory (Profs. Tatsu Takeuchi and Djordje Minic), B for heavy flavor physics with the Belle and Belle II experiments (Prof. Leo Piilonen), and N for neutrino physics (Profs. Jonathan Link and Piilonen).

  4. Pilot factors guidelines for the operational inspection of navigation systems

    NASA Technical Reports Server (NTRS)

    Sadler, J. F.; Boucek, G. P.

    1988-01-01

    A computerized human engineered inspection technique is developed for use by FAA inspectors in evaluating the pilot factors aspects of aircraft navigation systems. The short title for this project is Nav Handbook. A menu-driven checklist, computer program and data base (Human Factors Design Criteria) were developed and merged to form a self-contained, portable, human factors inspection checklist tool for use in a laboratory or field setting. The automated checklist is tailored for general aviation navigation systems and can be expanded for use with other aircraft systems, transports or military aircraft. The Nav Handbook inspection concept was demonstrated using a lap-top computer and an Omega/VLF CDU. The program generates standardized inspection reports. Automated checklists for LORAN/C and R NAV were also developed. A Nav Handbook User's Guide is included.

  5. Atmospheric Radiation Measurement Program facilities newsletter, January 2000

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sisterson, D.L.

    2000-02-16

    The subject of this newsletter is the ARM unmanned aerospace vehicle program. The ARM Program's focus is on climate research, specifically research related to solar radiation and its interaction with clouds. The SGP CART site contains highly sophisticated surface instrumentation, but even these instruments cannot gather some crucial climate data from high in the atmosphere. The Department of Energy and the Department of Defense joined together to use a high-tech, high-altitude, long-endurance class of unmanned aircraft known as the unmanned aerospace vehicle (UAV). A UAV is a small, lightweight airplane that is controlled remotely from the ground. A pilot sitsmore » in a ground-based cockpit and flies the aircraft as if he were actually on board. The UAV can also fly completely on its own through the use of preprogrammed computer flight routines. The ARM UAV is fitted with payload instruments developed to make highly accurate measurements of atmospheric flux, radiance, and clouds. Using a UAV is beneficial to climate research in many ways. The UAV puts the instrumentation within the environment being studied and gives scientists direct measurements, in contrast to indirect measurements from satellites orbiting high above Earth. The data collected by UAVs can be used to verify and calibrate measurements and calculated values from satellites, therefore making satellite data more useful and valuable to researchers.« less

  6. Dynamic Pricing Criteria in Linear Programming

    DTIC Science & Technology

    1988-07-01

    DTICE’ECTE h QSEPO08 19880 Department of Operations Researchs Stanford University Stanford, CA 94305 Fl . dommd lum b dLvulbcjasa Im %ailmft@d.I &~ T...information about positive ones. 38 C- M .9 ~ ,~- - ~ fl .’ %’% ’ % % .,h.] However, this rule works extremely well on the PILOT set, achieving...34 .r " .:." ," "e .-r".’.€ .-,N., N REFERENCES [1] Adler, I., Resende, M.G. and Veiga , G. (1986). An implementation of Karmax- kar’s algorithm for

  7. For Drafting Programs--Computer Graphics in Industrial Tech.

    ERIC Educational Resources Information Center

    Sutliff, Ron

    1980-01-01

    Posits that computer-aided drafting and design should be introduced to students in industrial technology programs. Discusses ways the technical educator can get involved in computer graphics to familiarize students with it without a large outlay of money. (JOW)

  8. CHE At Georgia Tech: A Period of Transition.

    ERIC Educational Resources Information Center

    Poehlein, Gary W.

    1980-01-01

    Presents information on the Georgia Institute of Technology. This information includes: (1) a brief history of the institute; (2) names of the faculty members of the chemistry and metallurgy divisions; (3) undergraduate program; and (4) graduate program. (HM)

  9. Effects of Logo-autobiography Program on Meaning in Life and Mental Health in the Wives of Alcoholics.

    PubMed

    Cho, Sunhee

    2008-06-01

    This study aimed to identify the effectiveness of a newly developed group therapy, called the logo-autobiography program, in improving meaning in life and mental health in the wives of alcoholics. The program was developed in four steps: literature review, pilot program development, pilot study and detailed program structuring. The pilot program was developed by combining a modified guided autobiography program with logotherapy. A non-randomized controlled trial was conducted with a pre- and post-test design. The instruments chosen for the study were the Purpose in Life (PIL) test and the Symptom Checklist-90-Revision (SCL-90-R) to measure the meaning in life and mental health. Data were collected between November 2006 and March 2007 from 19 subjects in the experimental group and 21 subjects in the control group, who were all wives of alcoholics from four South Korean cities. The score for meaning in life was significantly higher in the experimental group than in the control group (p = .047). Also, the scores for somatization (p = .001), interpersonal sensitivity (p = .008), depression (p = .003), hostility (p = .002) and global severity index (p = .001) were significantly lower in the experimental group than in the control group. This study indicated that the logo-autobiography program enhanced both meaning in life and mental health in alcoholics' wives, which suggests that the program would be very beneficial to this population. Furthermore, it might be suitable for improving mental health in families and communities that suffer from psychological trauma and meaninglessness.

  10. Wallops Station and the Creation of an American Space Program. Master's Degree awarded by Univ. of Maryland-Baltimore County

    NASA Technical Reports Server (NTRS)

    Wallace, Harold D., Jr.

    1997-01-01

    As part of the NASA history series a detailed history of Wallops Space Flight Facility from 1957 to 1966 is given. Discussions of Sputnik, NASA, Piloted Space Flight, Space Science Research, and comments on the changes the facility went through during the period are presented. Several appendices are attached as well covering R&D Launches, the NACA Era, organizational charts, Wallops' complement, and selected international cooperative programs.

  11. Craig R. Bomben

    NASA Technical Reports Server (NTRS)

    2001-01-01

    Craig R. Bomben became a pilot in the Flight Crew Branch of NASA's Dryden Flight Research Center, Edwards, Calif., in June 2001. His flying duties include a variety of research and support activities while piloting the F/A-18, DC-8, T-34C and King Air aircraft. He has more than 17 years and 3,800 hours of military and civilian flight experience in over 50 different aircraft types. Bomben came to NASA Dryden from a U.S. Navy assignment to the Personnel Exchange Program, Canada. He served as a test pilot in the Canadian Armed Forces located in Cold Lake, Alberta. He participated in numerous developmental programs to include CT-133 airborne ejection seat testing, F/A-18 weapons flutter testing and F/A-18 night vision goggles integration. Bomben performed U.S. Navy fleet service in 1995 as a strike-fighter department head. He completed two overseas deployments onboard the USS George Washington and USS Stennis. As a combat strike leader, he headed numerous multi-national missions over Iraq in support of Operation Southern Watch. Bomben graduated from the U.S. Naval Test Pilot School in 1992 and was subsequently assigned to the Naval Weapons Test Squadron at Pt. Mugu, Calif. During this tour he developed the F-14D bombsight and worked on various other F-14D and F/A-18 weapon systems developmental programs. Bomben is a 1985 graduate of Washington State University with a bachelor of science degree in electrical engineering. He graduated from naval flight training in 1987 and was recognized as a Commodore List graduate. His first assignment was to Naval Air Station Pensacola, Fla., where he was an instructor in the T-2B Buckeye. When selected to fly the F/A-18 in 1989, he joined a fleet squadron and deployed aboard the USS Forrestal. Bomben is married to the former Aissa Asuncion. They live in Lancaster, Calif., with their 3 children.

  12. Craig R. Bomben

    NASA Image and Video Library

    2001-06-19

    Craig R. Bomben became a pilot in the Flight Crew Branch of NASA's Dryden Flight Research Center, Edwards, Calif., in June 2001. His flying duties include a variety of research and support activities while piloting the F/A-18, DC-8, T-34C and King Air aircraft. He has more than 17 years and 3,800 hours of military and civilian flight experience in over 50 different aircraft types. Bomben came to NASA Dryden from a U.S. Navy assignment to the Personnel Exchange Program, Canada. He served as a test pilot in the Canadian Armed Forces located in Cold Lake, Alberta. He participated in numerous developmental programs to include CT-133 airborne ejection seat testing, F/A-18 weapons flutter testing and F/A-18 night vision goggles integration. Bomben performed U.S. Navy fleet service in 1995 as a strike-fighter department head. He completed two overseas deployments onboard the USS George Washington and USS Stennis. As a combat strike leader, he headed numerous multi-national missions over Iraq in support of Operation Southern Watch. Bomben graduated from the U.S. Naval Test Pilot School in 1992 and was subsequently assigned to the Naval Weapons Test Squadron at Pt. Mugu, Calif. During this tour he developed the F-14D bombsight and worked on various other F-14D and F/A-18 weapon systems developmental programs. Bomben is a 1985 graduate of Washington State University with a bachelor of science degree in electrical engineering. He graduated from naval flight training in 1987 and was recognized as a Commodore List graduate. His first assignment was to Naval Air Station Pensacola, Fla., where he was an instructor in the T-2B Buckeye. When selected to fly the F/A-18 in 1989, he joined a fleet squadron and deployed aboard the USS Forrestal. Bomben is married to the former Aissa Asuncion. They live in Lancaster, Calif., with their 3 children.

  13. Environmental Technology.

    ERIC Educational Resources Information Center

    Columbus State Community Coll., OH.

    This document contains materials developed for and about the environmental technology tech prep program of the South-Western City Schools in Ohio. Part 1 begins with a map of the program, which begins with an environmental science technology program in grades 11 and 12 that leads to entry-level employment or a 2-year environmental technology…

  14. Automotive Diagnostic Technologies.

    ERIC Educational Resources Information Center

    Columbus State Community Coll., OH.

    This document contains materials developed for and about the automotive diagnostic technologies tech prep program of the South-Western City Schools in Ohio. Part 1 begins with a map of the program, which begins with an automotive/diagnostic technologies program in grades 11 and 12 that leads to entry-level employment or a 2-year automotive…

  15. Tiered Internship Model for Undergraduate Students in Geospatial Science and Technology

    ERIC Educational Resources Information Center

    Kopteva, Irina A.; Arkowski, Donna; Craft, Elaine L.

    2015-01-01

    This article discusses the development, implementation, and evaluation of a tiered internship program for undergraduate students in geospatial science and technology (TIMSGeoTech). The internship program assists education programs in providing skill development that is relevant and useful, and it aligns graduates and their skills with industry…

  16. The Impact of a Cognitive Behavioral Pain Management Program on Sleep in Patients with Chronic Pain: Results of a Pilot Study.

    PubMed

    Blake, Catherine; Cunningham, Jennifer; Power, Camillus K; Horan, Sheila; Spencer, Orla; Fullen, Brona M

    2016-02-01

    To determine the impact of a cognitive behavioral pain management program on sleep in patients with chronic pain. Prospective nonrandomized controlled pilot study with evaluations at baseline and 12 weeks. Out-patient multidisciplinary cognitive behavioral pain management program in a university teaching hospital. Patients with chronic pain who fulfilled the criteria for participation in a cognitive behavioral pain management program. Patients assigned to the intervention group (n = 24) completed a 4 week cognitive behavioral pain management program, and were compared with a waiting list control group (n = 22). Assessments for both groups occurred at baseline and two months post cognitive behavioral pain management program. Outcome measures included self-report (Pittsburgh Sleep Quality Index) and objective (actigraphy) sleep measures, pain and quality of life measures. Both groups were comparable at baseline, and all had sleep disturbance. The Pittsburgh Sleep Quality Index correlated with only two of the seven objective sleep measures (fragmentation index r = 0.34, P = 0.02, and sleep efficiency percentage r = -0.31, P = 0.04). There was a large treatment effect for cognitive behavioral pain management program group in mean number of wake bouts (d = 0.76), where a significant group*time interaction was also found (P = 0.016), showing that the CBT-PMP group improved significantly more than controls in this sleep variable. Patients attending a cognitive behavioral pain management program have high prevalence of sleep disturbance, and actigraphy technology was well tolerated by the patients. Preliminary analysis of the impact of a cognitive behavioral pain management program on sleep is promising, and warrants further investigation.

  17. New generation extracorporeal membrane oxygenation with MedTech Mag-Lev, a single-use, magnetically levitated, centrifugal blood pump: preclinical evaluation in calves.

    PubMed

    Fujiwara, Tatsuki; Nagaoka, Eiki; Watanabe, Taiju; Miyagi, Naoto; Kitao, Takashi; Sakota, Daisuke; Mamiya, Taichi; Shinshi, Tadahiko; Arai, Hirokuni; Takatani, Setsuo

    2013-05-01

    We have evaluated the feasibility of a newly developed single-use, magnetically levitated centrifugal blood pump, MedTech Mag-Lev, in a 3-week extracorporeal membrane oxygenation (ECMO) study in calves against a Medtronic Bio-Pump BPX-80. A heparin- and silicone-coated polypropylene membrane oxygenator MERA NHP Excelung NSH-R was employed as an oxygenator. Six healthy male Holstein calves with body weights of about 100 kg were divided into two groups, four in the MedTech group and two in the Bio-Pump group. Under general anesthesia, the blood pump and oxygenator were inserted extracorporeally between the main pulmonary artery and the descending aorta via a fifth left thoracotomy. Postoperatively, both the pump and oxygen flow rates were controlled at 3 L/min. Heparin was continuously infused to maintain the activated clotting time at 200-240 s. All the MedTech ECMO calves completed the study duration. However, the Bio-Pump ECMO calves were terminated on postoperative days 7 and 10 because of severe hemolysis and thrombus formation. At the start of the MedTech ECMO, the pressure drop across the oxygenator was about 25 mm Hg with the pump operated at 2800 rpm and delivering 3 L/min flow. The PO2 of the oxygenator outlet was higher than 400 mm Hg with the PCO2 below 45 mm Hg. Hemolysis and thrombus were not seen in the MedTech ECMO circuits (plasma-free hemoglobin [PFH] < 5 mg/dL), while severe hemolysis (PFH > 20 mg/dL) and large thrombus were observed in the Bio-Pump ECMO circuits. Plasma leakage from the oxygenator did not occur in any ECMO circuits. Three-week cardiopulmonary support was performed successfully with the MedTech ECMO without circuit exchanges. The MedTech Mag-Lev could help extend the durability of ECMO circuits by the improved biocompatible performances. © 2013, Copyright the Authors. Artificial Organs © 2013, International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.

  18. Geology Exchange Program

    NASA Astrophysics Data System (ADS)

    Because geology professors cannot bring ore deposits from around the globe into their classrooms, the next best thing is to take their students to the deposits, according to David Norman, an associate professor of geochemistry at New Mexico Tech and Angus Moore of the Royal School of Mines. They organized a new exchange program between the New Mexico Institute of Mining and Technology in Socorro, N.M., and the Royal School of Mines in London, England. In May, 14 students from England toured deposits in New Mexico, Arizona, Utah, and Colorado; in the photograph, Norman (on the right) describes a rock from a New Mexico ore deposit to some of the visitors from England. In early June a contingency from New Mexico Tech began studying deposits in England, Spain, and Portugal. Norman and Moore say that the exchange program may be expanded next year.

  19. Make sure your imaging equipment goes the distance.

    PubMed

    Halverson, K A

    1997-11-01

    Today's hospitals have invested a substantial portion of their capital budgets on the purchase of high-tech equipment--diagnostic imaging machinery, clinical laboratory apparatus, biomedical devices--and yet only half have developed strategies for taking care of that equipment as it ages. When do you replace it? When is it obsolete? How do you determine whether it is cost effective? Kenneth Halverson examines the steps to take to develop and implement a successful asset management program that will enable you to keep your high-tech equipment going.

  20. KSC Tech Transfer News, Volume 3, No. 1

    NASA Technical Reports Server (NTRS)

    Dunn, Carol (Editor)

    2010-01-01

    Kennedy Tech Transfer News is the semiannual magazine of the Innovative Partnerships Program at NASA's Kennedy Space Center in Cape Canaveral, Florida. This magazine seeks to inform and educate civil servant and contractor personnel at Kennedy about actively participating in achieving NASA's technology transfer and partnership goals. The contents include: 1) About IPP; 2) NTR corner; 3) Innovator Insights; 4) Licensing Success; 5) Partnership Success; 6) SBIR/STTR Success; 7) Events; 8) Trands in Innovation; 9) Q&A: Data Rights; and 10) Awards.

  1. Data-Base Software For Tracking Technological Developments

    NASA Technical Reports Server (NTRS)

    Aliberti, James A.; Wright, Simon; Monteith, Steve K.

    1996-01-01

    Technology Tracking System (TechTracS) computer program developed for use in storing and retrieving information on technology and related patent information developed under auspices of NASA Headquarters and NASA's field centers. Contents of data base include multiple scanned still images and quick-time movies as well as text. TechTracS includes word-processing, report-editing, chart-and-graph-editing, and search-editing subprograms. Extensive keyword searching capabilities enable rapid location of technologies, innovators, and companies. System performs routine functions automatically and serves multiple users.

  2. NASA Tech Briefs, December 1991. Volume 15, No. 12

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Topics include: Electronic Components and Circuits. Electronic Systems, Physical Sciences, Materials, Computer Programs, Mechanics, Machinery, Fabrication Technology, Mathematics and Information Sciences,

  3. NASA Tech Briefs, December 2002

    NASA Technical Reports Server (NTRS)

    2002-01-01

    Topics covered include: Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; and Life Sciences.

  4. 48 CFR 1819.001 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Definitions. 1819.001 Section 1819.001 Federal Acquisition Regulations System NATIONAL AERONAUTICS AND SPACE ADMINISTRATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS 1819.001 Definitions. High-Tech as used in this part means...

  5. First NASA Aviation Safety Program Weather Accident Prevention Project Annual Review

    NASA Technical Reports Server (NTRS)

    Colantonio, Ron

    2000-01-01

    The goal of this Annual Review was to present NASA plans and accomplishments that will impact the national aviation safety goal. NASA's WxAP Project focuses on developing the following products: (1) Aviation Weather Information (AWIN) technologies (displays, sensors, pilot decision tools, communication links, etc.); (2) Electronic Pilot Reporting (E-PIREPS) technologies; (3) Enhanced weather products with associated hazard metrics; (4) Forward looking turbulence sensor technologies (radar, lidar, etc.); (5) Turbulence mitigation control system designs; Attendees included personnel from various NASA Centers, FAA, National Weather Service, DoD, airlines, aircraft and pilot associations, industry, aircraft manufacturers and academia. Attendees participated in discussion sessions aimed at collecting aviation user community feedback on NASA plans and R&D activities. This CD is a compilation of most of the presentations presented at this Review.

  6. PRONTO training for obstetric and neonatal emergencies in Mexico.

    PubMed

    Walker, Dilys M; Cohen, Susanna R; Estrada, Fatima; Monterroso, Marcia E; Jenny, Alisa; Fritz, Jimena; Fahey, Jenifer O

    2012-02-01

    To evaluate the acceptability, feasibility, rating, and potential impact of PRONTO, a low-tech and high-fidelity simulation-based training for obstetric and neonatal emergencies and teamwork using the PartoPants low-cost birth simulator. A pilot project was conducted from September 21, 2009, to April 9, 2010, to train interprofessional teams from 5 community hospitals in the states of Mexico and Chiapas. Module I (teamwork, neonatal resuscitation, and obstetric hemorrhage) was followed 3 months later by module II (dystocia and pre-eclampsia/eclampsia) and an evaluation. Four elements were assessed: acceptability; feasibility and rating; institutional goal achievement; teamwork improvement; and knowledge and self-efficacy. The program was rated highly both by trainees and by non-trainees who completed a survey and interview. Hospital goals identified by participants in the module I strategic-planning sessions were achieved for 65% of goals in 3 months. Teamwork, knowledge, and self-efficacy scores improved. PRONTO brings simulation training to low-resource settings and can empower interprofessional teams to respond more effectively within their institutional limitations to emergencies involving women and newborns. Further study is warranted to evaluate the potential impact of the program on obstetric and neonatal outcome. Copyright © 2011 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

  7. Aviation Weather Information Requirements Study

    NASA Technical Reports Server (NTRS)

    Keel, Byron M.; Stancil, Charles E.; Eckert, Clifford A.; Brown, Susan M.; Gimmestad, Gary G.; Richards, Mark A.; Schaffner, Philip R. (Technical Monitor)

    2000-01-01

    The Aviation Safety Program (AvSP) has as its goal an improvement in aviation safety by a factor of 5 over the next 10 years and a factor of 10 over the next 20 years. Since weather has a big impact on aviation safety and is associated with 30% of all aviation accidents, Weather Accident Prevention (WxAP) is a major element under this program. The Aviation Weather Information (AWIN) Distribution and Presentation project is one of three projects under this element. This report contains the findings of a study conducted by the Georgia Tech Research Institute (GTRI) under the Enhanced Weather Products effort, which is a task under AWIN. The study examines current aviation weather products and there application. The study goes on to identify deficiencies in the current system and to define requirements for aviation weather products that would lead to an increase in safety. The study also provides an overview the current set of sensors applied to the collection of aviation weather information. New, modified, or fused sensor systems are identified which could be applied in improving the current set of weather products and in addressing the deficiencies defined in the report. In addition, the study addresses and recommends possible sensors for inclusion in an electronic pilot reporting (EPIREP) system.

  8. ENVIRONMENTAL IMPACTS OF THE USE OF ORIMULSION (R): REPORT TO CONGRESS ON PHASE I OF THE ORIMULSION TECHNOLOGY ASSESSMENT PROGRAM, VOLUME 2

    EPA Science Inventory

    The report gives results of an evaluation of Orimulsion, a bitumen-in-water emulsion produced in Venezuela, to provide a better understanding of the potential environmental impacts associated with its use as a fuel. Pilot-scale tests were conducted at EPA's Environmental Research...

  9. The Great Aviation Transformation Begins

    NASA Image and Video Library

    2017-08-19

    On National Aviation Day, August 19, NASA goes “X.” While we celebrate the birthday of one of America’s original U.S. aviation pioneers – Orville Wright – we also celebrate the pioneers of right now. The women and men at NASA who are changing the face of aviation by going “X.” We’re starting the design and build of a series of piloted experimental aircraft – X-planes – for the final proof that new advanced tech and revolutionary shapes will give us faster, quieter, cleaner ways to get from here to there.

  10. Evaluation of teen seat belt demonstration projects in Colorado and Nevada : traffic tech.

    DOT National Transportation Integrated Search

    2012-02-01

    Teens have higher fatality and injury rates in motor vehicle : crashes than any other age group. The combination of immaturity, : inexperience, and underdeveloped decision-making skills : (including hazard recognition) contributes to the high crash r...

  11. Analytical Chemistry Laboratory

    NASA Technical Reports Server (NTRS)

    Anderson, Mark

    2013-01-01

    The Analytical Chemistry and Material Development Group maintains a capability in chemical analysis, materials R&D failure analysis and contamination control. The uniquely qualified staff and facility support the needs of flight projects, science instrument development and various technical tasks, as well as Cal Tech.

  12. NASA Tech Briefs, November 1991. Volume 15, No. 11

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Topics include: Electronic Components & and Circuits. Electronic Systems, Physical Sciences, Materials, Computer Programs, Mechanics, Machinery, Fabrication Technology, and Mathematics and Information Sciences,

  13. The Influence of Learning Strategies in the Acquisition, Retention, and Transfer of a Procedural Task.

    DTIC Science & Technology

    1979-08-01

    Lockhart , R. S. Levels of processing : A framework for memory research. Journal of Verbal Learning and Verbal Behavior, 1972, 11, 671-684. Craik , F. I. M...learning and memory research. In F. I. f. Craik & L. S. Cermak (Eds.), Levels of processing and theories of memory. Hillsdale, N. J.: Erlbaum, 1978...R. N., Gerson, R. F., & Kim, K. Information processing capabilities in performers differing in levels of motor skill. (Tech. Rep. TR-79-A4). a

  14. Tech House

    NASA Technical Reports Server (NTRS)

    1978-01-01

    The members of the Swain family- Dr. Charles "Bill" Swain, wife Elaine, daughter Carol, 17, son "Chuck", 12, and dog Susie have an interesting assignment. They are active participants in an important NASA research program involving the application of space-age technology to home construction. b' Transplanted Floridians, the Swains now reside in NASA's Tech House, loatedat Langley Research Center, Hampton, Virginia. Their job is to use and help evaluate the variety of advanced technology systems in Tech House. A contemporary three-bedroom home, Tech House incorporates NASA technology, the latest commercial building techniques and other innovations, all designed to reduce energy and water consumption and to provide new levels of comfort, convenience, security and fire safety. Tech House equipment performed well in initial tests, but a house is not a home until it has people. That's where the Swains come in. NASA wants to see how the various systems work under actual living conditions, to confirm the effectiveness of the innovations or to determine necessary modifications for improvement. The Swains are occupying the house for a year, during which NASA engineers are computer monitoring the equipment and assembling a record of day-to-day performance. . Tech House is a laboratory rather than a mass production prototype, but its many benefits may influence home design and construction. In a period of sharply rising utility costs, widespread adoption of Tech House features could provide large-scale savings to homeowners and potentially enormous national benefit in resources conservation. Most innovations are aerospace spinoffs: Some of the equipment is now commercially available; other systems are expected to be in production within a few years. Around 1980, a Tech House-type of home could be built for $45-50,000 (1 976 dollars). It is estimated that the homeowner would save well over $20,000 (again 1976 dollars) in utility costs over the average mortgage span of 20 years.

  15. Report to Congress State Block Grant Program

    DTIC Science & Technology

    1992-05-01

    by theweekdays, except Federal holidays . include the amendment number Administrator will administer the Fiscal FOR PUWMER INFORMATION CONTAC’r...responded that they will not apply for the State block grant pilot program: 1. Massachusetts (12/30/88) 2. Virgin Islands (1/18/89) 3. Palau (1/24/89) 4...Massachusetts (12/30/88) 2. Virgin Islands (1/18/89) 3. Palau (1/24/89) 4. Nebraska (2/2/89) 5. California (2/7/89) 6. Iowa (2/13/89) 7. Texas (2/14

  16. Program for transfer research and impact studies

    NASA Technical Reports Server (NTRS)

    Kottenstette, J. P.; Rusnak, J. J.; Staskin, E. R.

    1972-01-01

    The progress made in achieving TRIS research objectives during the first six months of 1972 is reviewed. The Tech Brief-Technical Support Package Program and technology transfer profiles are presented along with summaries of technology transfer in nondestructive testing, and visual display systems.

  17. More cops more stops: evaluation of a combined HVE program in Oklahoma and Tennessee : traffic tech.

    DOT National Transportation Integrated Search

    2016-10-01

    More Cops More Stops (MCMS) was a high-visibility enforcement : (HVE) program designed to address multiple traffic : safety issues with one message and programmatic : effort. Law enforcement agencies (LEAs) in Oklahoma and : Tennessee conducted heigh...

  18. Pilot Personality Profile Using the NEO-PI-R

    NASA Technical Reports Server (NTRS)

    Fitzgibbons, Amy; Davis, Donald; Schutte, Paul C.

    2004-01-01

    This paper recounts the qualitative research conducted to determine if a general personality measure would provide a personality profile for commercial aviation pilots. The researchers investigated a widely used general personality inventory, the NEO-PI-R, with 93 pilots. The results indicate that a 'pilot personality' does exist. Future research and implications are discussed.

  19. Pilot Personality Profile Using the NEO-PI-R

    NASA Technical Reports Server (NTRS)

    Fitzgibbons, Amy; Davis, Don; Schutte, Paul C. (Technical Monitor)

    2000-01-01

    This paper recounts the qualitative research conducted to determine if a general personality measure would provide a personality profile for commercial aviation pilots. The researchers investigated a widely used general personality inventory, the NEO-PI-R, with 93 pilots. The results indicate that a "pilot personality" does exist. Future research and implications are discussed.

  20. Pilot Fullerton points Hasselblad camera out forward flight deck window W6

    NASA Technical Reports Server (NTRS)

    1982-01-01

    Pilot Fullerton, wearing communications kit assembly (ASSY) mini headset (HDST), points Hasselblad camera out forward flight deck pilots station window W6. Forward flight deck control panels F4, F8, and R1, flight mirror assy, Volume R5 Kit, and pilots ejection seat (S2) headrest appear in view.

  1. High Tech. High Technology in Vocational Education. Training Programs for Emerging Occupations.

    ERIC Educational Resources Information Center

    Rodenstein, Judith, Ed.

    This publication represents the collaborative efforts of vocational educators who are involved in the planning and teaching of high technology training programs. It contains a series of reports and profiles which illustrate the diversity of high technology programs in vocational education institutions and the variety of approaches that can be used…

  2. 78 FR 29117 - After Final Consideration Pilot Program 2.0

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-17

    ...] After Final Consideration Pilot Program 2.0 AGENCY: United States Patent and Trademark Office, Commerce... Final Consideration Pilot Program (AFCP) to create the After Final Consideration Pilot Program 2.0 (AFCP... without modifications) depending on feedback from the participants and the effectiveness of the pilot...

  3. NASA Tech Briefs, August 1992. Volume 16, No. 8

    NASA Technical Reports Server (NTRS)

    1992-01-01

    Topics include: Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  4. NASA Tech Briefs, September 1992. Volume 16, No.9

    NASA Technical Reports Server (NTRS)

    1992-01-01

    Topics include: Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  5. NASA Tech Briefs, January 1993. Volume 17, No. 1

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Topics include: Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences;

  6. NASA Tech Briefs, November 1992. Volume 16, No. 11

    NASA Technical Reports Server (NTRS)

    1992-01-01

    Topics include: Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences;

  7. NASA Tech Briefs, December 1992. Volume 16, No. 12

    NASA Technical Reports Server (NTRS)

    1992-01-01

    Topics include: Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences;

  8. Earthtech, Dig-Texas and Upward Bound: Outreach to At-Risk Students with Interdisciplinary STEM Activities

    NASA Astrophysics Data System (ADS)

    Olgin, J. G.; Güereque, M.; Pennington, D. D.; Everett, A.; Dixon, J. G.; Reyes, A.; Houser, P. I. Q.; Baker, J. A.; Stocks, E.; Ellins, K.

    2015-12-01

    The Geological Sciences department at the University of Texas at El Paso (UTEP) hosted the EarthTech outreach program - a one-week intensive summer camp for low-income, at-risk high school students. The EarthTech program engaged students in STEM activities from geological and environmental sciences. Developed and led by university student-mentors with guidance from a supervising faculty member, the course engaged Upward Bound students with lectures, interactive projects, and excursions to local ecological preserves and geological sites around El Paso, Texas. Topics covered plant and animal distribution and diversity, water and soil dynamics, evolution and paleontology, geohazards, and planetary science. Field trips were combined with hands-on activities, including activities from DIG Texas teaching modules. The NSF-funded DIG Texas Instructional Blueprints project is organizing vetted, high quality online educational resources and learning activities into teaching modules. The modules follow a storyline and demonstrate congruency with the Next Generation Science Standards. Selected DIG Texas resources were included in the daily curriculum to complement the field trip and other hands-on activities. EarthTech students created ESRI Online GIS story maps in which they showed the locations of the field trips, incorporated photographs they had taken, and provided written reflections about their camp experiences. The DIG Texas project evaluation collected survey and interview data from the university student mentors throughout the week to ascertain the efficacy of the program. This poster presentation will include an overview of the program, including examples of work and evaluation results.

  9. 76 FR 79243 - Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Notice of Filing and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-21

    ... Pilot Program will allow for further analysis of the Pilot Program and a determination of how the Pilot Program should be structured in the future. During this extension of the Penny Pilot Program, CBOE... to the Pilot Program (i.e. December) would not be used for purposes of the six-month analysis. Thus...

  10. NASA Tech Briefs, May 2000. Volume 24, No. 5

    NASA Technical Reports Server (NTRS)

    2000-01-01

    Topics include: Sensors: Test and Measurement; Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Composites and Plastics; Materials; Computer Programs; Mechanics;

  11. NASA Tech Briefs, June 2000. Volume 24, No. 6

    NASA Technical Reports Server (NTRS)

    2000-01-01

    Topics include: Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Test and Measurement; Physical Sciences; Materials; Computer Programs; Computers and Peripherals;

  12. NASA Tech Briefs, October 1989. Volume 13, No. 10

    NASA Technical Reports Server (NTRS)

    1989-01-01

    Topics include: Electronic Components and Circuits. Electronic Systems, Physical Sciences, Materials, Computer Programs, Mechanics, Machinery, Fabrication Technology, Mathematics and Information Sciences, and Life Sciences

  13. NASA Tech Briefs, February 1990. Volume 14, No. 2

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Topics include: Electronic Components and Circuits. Electronic Systems, Physical Sciences, Materials, Computer Programs, Mechanics, Machinery, Fabrication Technology, Mathematics and Information Sciences, and Life Sciences

  14. NASA Tech Briefs, January 1990. Volume 14, No. 1

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Topics include: Electronic Components and Circuits. Electronic Systems, Physical Sciences, Materials, Computer Programs, Mechanics, Machinery, Fabrication Technology, Mathematics and Information Sciences, and Life Sciences

  15. NASA Tech Briefs, November 1989. Volume 13, No. 11

    NASA Technical Reports Server (NTRS)

    1989-01-01

    Topics include: Electronic Components and Circuits. Electronic Systems, Physical Sciences, Materials, Computer Programs, Mechanics, Machinery, Fabrication Technology, Mathematics and Information Sciences, and Life Sciences

  16. NASA Tech Briefs, September 1989. Volume 13, No. 9

    NASA Technical Reports Server (NTRS)

    1989-01-01

    Topics include: Electronic Components and Circuits. Electronic Systems, Physical Sciences, Materials, Computer Programs, Mechanics, Machinery, Fabrication Technology, Mathematics and Information Sciences, and Life Sciences.

  17. NASA Tech Briefs, October 1992. Volume 16, No. 10

    NASA Technical Reports Server (NTRS)

    1992-01-01

    Topics covered include: Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication technology; Mathematics and Information Sciences; Life Sciences.

  18. NASA Tech Briefs, December 1989. Volume 13, No. 12

    NASA Technical Reports Server (NTRS)

    1989-01-01

    Topics include: Electronic Components and Circuits. Electronic Systems, Physical Sciences, Materials, Computer Programs, Mechanics, Machinery, Fabrication Technology, Mathematics and Information Sciences, and Life Sciences.

  19. NASA Tech Briefs, April 1993. Volume 17, No. 4

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Topics include: Optoelectronics; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences;

  20. NASA Tech Briefs, March 1990. Volume 14, No. 3

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Topics include: Electronic Components and Circuits. Electronic Systems, Physical Sciences, Materials, Computer Programs, Mechanics, Machinery, Fabrication Technology, Mathematics and Information Sciences, and Life Sciences

  1. Automation bias: decision making and performance in high-tech cockpits.

    PubMed

    Mosier, K L; Skitka, L J; Heers, S; Burdick, M

    1997-01-01

    Automated aids and decision support tools are rapidly becoming indispensable tools in high-technology cockpits and are assuming increasing control of"cognitive" flight tasks, such as calculating fuel-efficient routes, navigating, or detecting and diagnosing system malfunctions and abnormalities. This study was designed to investigate automation bias, a recently documented factor in the use of automated aids and decision support systems. The term refers to omission and commission errors resulting from the use of automated cues as a heuristic replacement for vigilant information seeking and processing. Glass-cockpit pilots flew flight scenarios involving automation events or opportunities for automation-related omission and commission errors. Although experimentally manipulated accountability demands did not significantly impact performance, post hoc analyses revealed that those pilots who reported an internalized perception of "accountability" for their performance and strategies of interaction with the automation were significantly more likely to double-check automated functioning against other cues and less likely to commit errors than those who did not share this perception. Pilots were also lilkely to erroneously "remember" the presence of expected cues when describing their decision-making processes.

  2. Creation of security engineering programs by the Southwest Surety Institute

    NASA Astrophysics Data System (ADS)

    Romero, Van D.; Rogers, Bradley; Winfree, Tim; Walsh, Dan; Garcia, Mary Lynn

    1998-12-01

    The Southwest Surety Institute includes Arizona State University (ASU), Louisiana State University (LSU), New Mexico Institute of Mining and Technology (NM Tech), New Mexico State University (NMSU), and Sandia National Laboratories (SNL). The universities currently offer a full spectrum of post-secondary programs in security system design and evaluation, including an undergraduate minor, a graduate program, and continuing education programs. The programs are based on the methodology developed at Sandia National Laboratories over the past 25 years to protect critical nuclear assets. The programs combine basic concepts and principles from business, criminal justice, and technology to create an integrated performance-based approach to security system design and analysis. Existing university capabilities in criminal justice (NMSU), explosives testing and technology (NM Tech and LSU), and engineering technology (ASU) are leveraged to provide unique science-based programs that will emphasize the use of performance measures and computer analysis tools to prove the effectiveness of proposed systems in the design phase. Facility managers may then balance increased protection against the cost of implementation and risk mitigation, thereby enabling effective business decisions. Applications expected to benefit from these programs include corrections, law enforcement, counter-terrorism, critical infrastructure protection, financial and medical care fraud, industrial security, and border security.

  3. ChemTechLinks: Alliances for Chemical Technician Education

    NASA Astrophysics Data System (ADS)

    Nameroff, Tamara

    2003-09-01

    ChemTechLinks (CTL) is a project of the American Chemical Society (ACS) Educational and International Activities Division and funded by the National Science Foundation to support and advance chemistry-based technician education. The project aims to help improve technician education programs, foster academic-industry alliances, provide professional development opportunities for faculty, and increase student recruitment into chemical technology. The CTL Web site serves as an information clearinghouse and link to other ACS resources and programs, including a Web-based, Voluntary Industry Standards (VIS) database, the Chemistry Technician Program Approval Service, the College Chemistry Consultants Service, summer workshops for high school teachers and two-year college faculty that emphasize a technology-oriented curriculum, scholarships for two-year college faculty to attend ACS Short Courses, a self-study instructional guide for faculty to use in preparing for classroom instruction, and information and free recruitment materials about career opportunities in chemistry technology.

  4. Magnetic-based NDE of prestressed and post-tensioned concrete members : the MFL system : tech brief.

    DOT National Transportation Integrated Search

    1997-02-01

    This report assesses the effectiveness of vehicle retirement programs in reducing emissions from the motor vehicle fleets, as well as examining the effect of a program's timing on the magnitude of these reductions. First, the eastern Massachusetts no...

  5. Year 1 of the Washington nighttime seat belt enforcement program : traffic tech.

    DOT National Transportation Integrated Search

    2010-09-01

    The first year of the Washington nighttime belt program : ran from May 2007 through May 2008. During this period, WTSC ran three, two-week nighttime seat belt enforcement : campaigns. The primary message of the ad was that extra : seat-belt-focuse...

  6. Nighttime enforcement of seat belt laws: an evaluation of three community programs : traffic tech.

    DOT National Transportation Integrated Search

    2010-04-01

    Enforcement of seat belt laws has been conducted largely : during daylight hours. Daytime enforcement programs : have worked well to improve observed belt use rates during : the day, but have been shown less often to affect nighttime : use. Fatality ...

  7. 48 CFR 212.7102 - Pilot program.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Pilot program. 212.7102... OF DEFENSE ACQUISITION PLANNING ACQUISITION OF COMMERCIAL ITEMS Pilot Program for Acquisition of Military-Purpose Nondevelopmental Items 212.7102 Pilot program. ...

  8. Saturn Apollo Program

    NASA Image and Video Library

    1971-01-01

    This is the official three-member crew portrait of the Apollo 15 (SA-510). Pictured from left to right are: David R. Scott, Mission Commander; Alfred M. Worden Jr., Command Module pilot; and James B. Irwin, Lunar Module pilot. The fifth marned lunar landing mission, Apollo 15 (SA-510), lifted off on July 26, 1971. Astronauts Scott and Irwin were the first to use a wheeled surface vehicle, the Lunar Roving Vehicle (LRV), or the Rover, which was designed and developed by the Marshall Space Flight Center, and built by the Boeing Company. The astronauts spent 13 days, nearly 67 hours, on the Moon's surface to inspect a wide variety of its geological features.

  9. Defense Research: Improved Management of DOD’s Technical Corrosion Collaboration Program Needed

    DTIC Science & Technology

    2014-05-01

    Education and Research on Corrosion and Material Performance TCC Technical Corrosion Collaboration UCC University Corrosion Collaboration This is...is the successor to the University Corrosion Collaboration ( UCC ) pilot program, established in 2008. The TCC program builds on efforts of the UCC ...going from a pilot to a full program. They indicated that the UCC pilot program naturally evolved into the TCC pilot program in 2011, and the pilot

  10. The Military Family: A Selective Bibliography.

    DTIC Science & Technology

    1981-09-01

    1975 K8 iittle. Roger W ., ed. Handbook of Military Instituit ions. Beve rly 1iII s , CA: Sage, 1971. 607 1. UA 10 .1123 l.ittle, Roger W., ed. A...Program Management ." Commanh r.; Digest 18: entire issue, September 11, 1975 "CHAMPUS Complexitis Explained by ROA Sui-gt.n." CO),. Ialrrv G. Becker...lluaiv 1973 ’Missing Pilots’ Chi ldren Rece iv,, VA Schl Aid." Air Iorce ’lit:; l’ 1I, 1971 ’Mission: Financial Planning." (apt. Lvle R. Me tzlor and 2d

  11. NASA Tech Briefs, January 1989. Volume 13, No. 1

    NASA Technical Reports Server (NTRS)

    1989-01-01

    Topics include: Electronic Components & and Circuits. Electronic Systems, A Physical Sciences, Materials, Computer Programs, Mechanics, Machinery, Fabrication Technology, Mathematics and Information Sciences, and Life Sciences.

  12. NASA Tech Briefs, June 1993. Volume 17, No. 6

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Topics include: Imaging Technology: Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  13. NASA Tech Briefs, November 1993. Volume 17, No. 11

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Topics covered: Advanced Manufacturing; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  14. NASA Tech Briefs, January 1997. Volume 21, No. 1

    NASA Technical Reports Server (NTRS)

    1997-01-01

    Topics: Sensors; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Books and Reports.

  15. NASA Tech Briefs, February 1993. Volume 17, No. 2

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Topics include: Communication Technology; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  16. NASA Tech Briefs, April 1992. Volume 16, No. 4

    NASA Technical Reports Server (NTRS)

    1992-01-01

    Topics covered include: New Product Ideas; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

  17. FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    George Rizeq; Janice West; Arnaldo Frydman

    It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the process efficiency and environmental impact performance of fossil fuel utilization. GE Global Research has developed an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP module offers the potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions including NO{sub x}. GE Global Research (prime contractor) wasmore » awarded a contract from U.S. DOE NETL to develop the UFP technology. Work on this Phase I program started on October 1, 2000. The project team includes GE Global Research, Southern Illinois University at Carbondale (SIU-C), California Energy Commission (CEC), and T. R. Miles, Technical Consultants, Inc. In the UFP technology, coal and air are simultaneously converted into separate streams of (1) high-purity hydrogen that can be utilized in fuel cells or turbines, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure vitiated air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on ASPEN Plus process modeling, has an estimated process efficiency of 6% higher than IGCC with conventional CO{sub 2} separation. The current R&D program will determine the feasibility of the integrated UFP technology through pilot-scale testing, and will investigate operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates experimental testing, modeling and economic studies to demonstrate the UFP technology. This is the thirteenth quarterly technical progress report for the UFP program, which is supported by U.S. DOE NETL under Contract No. DE-FC26-00FT40974. This report summarizes program accomplishments for the period starting October 1, 2003 and ending December 31, 2003. The report includes an introduction summarizing the UFP technology, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including lab-scale experimental testing, pilot-scale assembly, pilot-scale demonstration and program management and technology transfer.« less

  18. Pilot Study to Aid in the Designing of Research on the Officer Candidate Training Program. PJ-3407-01

    DTIC Science & Technology

    1952-08-01

    Coadidate Scbhol, Aberden Proving Oromds, Md. 20 G The Antiaircraft sa OuGided Misiles Brach Officer Canidate School, Fort B11.., Temaw 22 9 The Army...M4onmouth, N. J. R The Infantry Officer Candidate School, Fort BenninG, Georgia F The Ordnance Officer Candidate School, Aberdeen Proving Grounds , Md

  19. 78 FR 23941 - Pilot Program for Early Feasibility Study Investigational Device Exemption Applications...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-23

    ...] Pilot Program for Early Feasibility Study Investigational Device Exemption Applications; Extending the... 13343), FDA terminated the acceptance of applications into the program and extended the pilot program for the nine accepted sponsors until May 8, 2013. The pilot program will be further extended for the...

  20. 14 CFR 91.1097 - Pilot and flight attendant crewmember training programs.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 2 2011-01-01 2011-01-01 false Pilot and flight attendant crewmember... RULES Fractional Ownership Operations Program Management § 91.1097 Pilot and flight attendant crewmember training programs. (a) Each program manager must establish and maintain an approved pilot training program...

  1. 14 CFR 91.1097 - Pilot and flight attendant crewmember training programs.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Pilot and flight attendant crewmember... RULES Fractional Ownership Operations Program Management § 91.1097 Pilot and flight attendant crewmember training programs. (a) Each program manager must establish and maintain an approved pilot training program...

  2. 9 CFR 149.9 - Pilot program sites.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Pilot program sites. 149.9 Section 149... LIVESTOCK IMPROVEMENT VOLUNTARY TRICHINAE CERTIFICATION PROGRAM § 149.9 Pilot program sites. Pork production sites participating in an APHIS-approved trichinae pilot program at the time of implementation of the...

  3. 9 CFR 149.9 - Pilot program sites.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Pilot program sites. 149.9 Section 149... LIVESTOCK IMPROVEMENT VOLUNTARY TRICHINAE CERTIFICATION PROGRAM § 149.9 Pilot program sites. Pork production sites participating in an APHIS-approved trichinae pilot program at the time of implementation of the...

  4. Scientific support of SciTech museum exhibits and outreach programs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Peshkin, M.

    SciTech (Science and Technology Interactive Center) is a small hands-on science museum located in Aurora, Illinois, not far from Argonne National Laboratory. Its constituency includes prosperous suburbs and economically disadvantaged minority communities in Aurora and Chicago. Its mission is to contribute to the country`s scientific literacy initiative by offering hands-on experiences on the museum floor and through outreach programs extended to school children, their teachers, and other groups. Argonne`s participation is focused mainly on the development of exhibits to carry the ideas of modern science and technology to the public. This is an area in which traditional museums are weak,more » but in which SciTech has become a nationally recognized leader with the assistance of Argonne, Fermilab, nearby technological companies, and many volunteer scientists and engineers. We also participate in development and improvement of the museum`s general exhibits and outreach programs. Argonne`s Director, Alan Schriesheim, serves as a member of the museum`s Board of Directors. Murray Peshkin serves part-time as the museum`s Senior Scientist. Dale Henderson serves part-time as an exhibit developer. That work is supported by the Laboratory Director`s discretionary funds. In addition, several members of the Physics Division voluntarily assist with exhibit development and the Division makes facilities available for that effort.« less

  5. Problem Reporting Taxonomy and Data Preparation Tool Evaluation

    NASA Technical Reports Server (NTRS)

    Beil, Robert J.

    2010-01-01

    A member of the NASA Engineering and Safety Center (NESC) Systems Engineering Office (SEO) Technical Discipline Team (TDT) requested a SEO-managed activity to perform a gap analysis on the proposed NASA Standard 0006, "Common NASA Taxonomy for Problem Reporting, Analysis, and Resolution", and to create an input filter and set of instructions for using the data-mining/data-cleansing tool TechOasis1 with Space Shuttle Program (SSP) problem reporting data. The work that achieved these objectives and deployment of TechOasis are discussed in this report.

  6. Earth Science Goes E-Commerce

    NASA Technical Reports Server (NTRS)

    2000-01-01

    Software packages commercially marketed by Agri ImaGIS allow customers to analyze farm fields. Agri ImaGIS provides satellite images of farmland and agricultural views to US clients. The company approached NASA-MSU TechLink for access to technology that would improve the company's capabilities to deliver satellite images over the Internet. TechLink found that software with the desired functions had already been developed through NASA's Remote Sensing Database Program. Agri ImaGIS formed a partnership with the University of Minnesota group that allows the company to further develop the software to meet its Internet commerce needs.

  7. National CPS Certification | A Program of Safe Kids Worldwide

    Science.gov Websites

    the Tech! ABOUT THE PROGRAM National CPS Certification Training is a program of Safe Kids Worldwide ; E-Vouchers FAQS/HELP FAQs Fees Forms Policies & Procedures Who We Are NHTSA Safe Kids CPS-board State Farm Follow us on Facebook Copyright © 2017 by Safe Kids Worldwide - Child Passenger Safety

  8. Career Awareness Program; Fruth Elementary School.

    ERIC Educational Resources Information Center

    Kelly, Julia; Gaujot, Carol

    This is a report of a career education program, first conceived through a school assembly and initiated at Fruth Elementary School in grades K-6. The format used by the teachers correlates a phase of the world of work with regular school work. Some students and teachers from the Career Education Tech. Center participate in this program as do…

  9. Fun & Fit, Phase I: A Program for Overweight African American and Hispanic American Children from Low-Income Families

    ERIC Educational Resources Information Center

    Meaney, Karen S.; Hart, Melanie A.; Griffin, L. Kent

    2009-01-01

    Fun & Fit is a program designed to create positive physical activity experiences and to promote healthy lifestyle choices among overweight children from low-income African American and Hispanic American families. The program is a collaborative project between Texas Tech University and the Lubbock Independent School District funded through a…

  10. 48 CFR 212.7002 - Pilot program.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Pilot program. 212.7002... OF DEFENSE ACQUISITION PLANNING ACQUISITION OF COMMERCIAL ITEMS Pilot Program for Transition to Follow-On Contracting After Use of Other Transaction Authority 212.7002 Pilot program. ...

  11. 48 CFR 212.7002 - Pilot program.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Pilot program. 212.7002... OF DEFENSE ACQUISITION PLANNING ACQUISITION OF COMMERCIAL ITEMS Pilot Program for Transition to Follow-On Contracting After Use of Other Transaction Authority 212.7002 Pilot program. ...

  12. 75 FR 80561 - Community Express Pilot Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-22

    ... SMALL BUSINESS ADMINISTRATION Community Express Pilot Program AGENCY: U.S. Small Business Administration (SBA). ACTION: Notice of short-term extension and termination of the Community Express Pilot Program. SUMMARY: This notice announces the termination of the Community Express Pilot Program following a...

  13. 77 FR 59911 - Request To Make Special Program for the Law School Clinic Certification Patent Pilot Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-01

    ...] Request To Make Special Program for the Law School Clinic Certification Patent Pilot Program AGENCY... and Trademark Office (USPTO) is implementing a pilot program in which a law school clinic participating in the USPTO Law School Clinic Certification Pilot Program may file an application for a pro bono...

  14. Petascale Simulation Initiative Tech Base: FY2007 Final Report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    May, J; Chen, R; Jefferson, D

    The Petascale Simulation Initiative began as an LDRD project in the middle of Fiscal Year 2004. The goal of the project was to develop techniques to allow large-scale scientific simulation applications to better exploit the massive parallelism that will come with computers running at petaflops per second. One of the major products of this work was the design and prototype implementation of a programming model and a runtime system that lets applications extend data-parallel applications to use task parallelism. By adopting task parallelism, applications can use processing resources more flexibly, exploit multiple forms of parallelism, and support more sophisticated multiscalemore » and multiphysics models. Our programming model was originally called the Symponents Architecture but is now known as Cooperative Parallelism, and the runtime software that supports it is called Coop. (However, we sometimes refer to the programming model as Coop for brevity.) We have documented the programming model and runtime system in a submitted conference paper [1]. This report focuses on the specific accomplishments of the Cooperative Parallelism project (as we now call it) under Tech Base funding in FY2007. Development and implementation of the model under LDRD funding alone proceeded to the point of demonstrating a large-scale materials modeling application using Coop on more than 1300 processors by the end of FY2006. Beginning in FY2007, the project received funding from both LDRD and the Computation Directorate Tech Base program. Later in the year, after the three-year term of the LDRD funding ended, the ASC program supported the project with additional funds. The goal of the Tech Base effort was to bring Coop from a prototype to a production-ready system that a variety of LLNL users could work with. Specifically, the major tasks that we planned for the project were: (1) Port SARS [former name of the Coop runtime system] to another LLNL platform, probably Thunder or Peloton (depending on when Peloton becomes available); (2) Improve SARS's robustness and ease-of-use, and develop user documentation; and (3) Work with LLNL code teams to help them determine how Symponents could benefit their applications. The original funding request was $296,000 for the year, and we eventually received $252,000. The remainder of this report describes our efforts and accomplishments for each of the goals listed above.« less

  15. NASA Tech Briefs, January 1992. Volume 16, No. 1

    NASA Technical Reports Server (NTRS)

    1992-01-01

    Topics include: New Product Ideas; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Fabrication; Mathematics and Information Sciences; Life Sciences;

  16. NASA Tech Briefs, May 1992. Volume 16, No. 5

    NASA Technical Reports Server (NTRS)

    1992-01-01

    Topics include: New Product Ideas; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  17. NASA Tech Briefs, May 1988. Volume 12, No. 5

    NASA Technical Reports Server (NTRS)

    1988-01-01

    Topics : New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics ; Machinery; Fabrication Technology; Mathematics and Information Sciences.

  18. NASA Tech Briefs, July 1992. Volume 16, No. 7

    NASA Technical Reports Server (NTRS)

    1992-01-01

    Topics include: New Product Ideas; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  19. NASA Tech Briefs, November 1990. Volume 14, No. 11

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Topics: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

  20. NASA Tech Briefs, March 1992. Volume 16, No. 3

    NASA Technical Reports Server (NTRS)

    1992-01-01

    Topics include: New Product Ideas; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  1. NASA Tech Briefs, April 1990. Volume 14, No. 4

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Topics: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

  2. NASA Tech Briefs, September 1994. Volume 18, No. 9

    NASA Technical Reports Server (NTRS)

    1994-01-01

    Topics: Sensors; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences; Books and Reports.

  3. Click it or ticket evaluation, 2008–2009 : traffic tech.

    DOT National Transportation Integrated Search

    2013-06-01

    Click It or Ticket (CIOT) is a high-visibility enforcement : program to increase seat belt use. Click It or Ticket was : adopted as a national program in 2003 and is credited : with steady increases in seat belt use across the Nation. : In 2009, seat...

  4. 34 CFR 406.3 - What activities may the Secretary fund?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... graduation and two years of higher education, or an apprenticeship training program of at least two years... 406.3 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE-ADMINISTERED TECH-PREP EDUCATION PROGRAM...

  5. 34 CFR 406.3 - What activities may the Secretary fund?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... graduation and two years of higher education, or an apprenticeship training program of at least two years... 406.3 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE-ADMINISTERED TECH-PREP EDUCATION PROGRAM...

  6. Esthetic Education in Teacher Education (LEEP).

    ERIC Educational Resources Information Center

    Texas Tech Univ., Lubbock.

    The Lubbock Esthetic Education Program (LEEP) is being offered as a field-based experience which combines theory and practice. As an interdisciplinary arts-education program conducted by teams composed of arts and education faculty and graduate and undergraduate students of Texas Tech University, LEEP is concerned with developing esthetic…

  7. The Vanishing Neighborhood Campus

    ERIC Educational Resources Information Center

    Halfond, Jay A.

    2012-01-01

    Only a generation ago, universities like Northeastern and Boston University had campuses strategically sprinkled throughout eastern Massachusetts. Lesley University offered graduate education programs across the U.S. BU had a contract with the U.S. Army to deliver master's programs on military bases throughout Europe. Mega-high-tech companies,…

  8. GATE Center for Automotive Fuel Cell Systems at Virginia Tech

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nelson, Douglas

    2011-09-30

    The Virginia Tech GATE Center for Automotive Fuel Cell Systems (CAFCS) achieved the following objectives in support of the domestic automotive industry: Expanded and updated fuel cell and vehicle technologies education programs; Conducted industry directed research in three thrust areas development and characterization of materials for PEM fuel cells; performance and durability modeling for PEM fuel cells; and fuel cell systems design and optimization, including hybrid and plug-in hybrid fuel cell vehicles; Developed MS and Ph.D. engineers and scientists who are pursuing careers related to fuel cells and automotive applications; Published research results that provide industry with new knowledge whichmore » contributes to the advancement of fuel cell and vehicle systems commercialization. With support from the Dept. of Energy, the CAFCS upgraded existing graduate course offerings; introduced a hands-on laboratory component that make use of Virginia Tech's comprehensive laboratory facilities, funded 15 GATE Fellowships over a five year period; and expanded our program of industry interaction to improve student awareness of challenges and opportunities in the automotive industry. GATE Center graduate students have a state-of-the-art research experience preparing them for a career to contribute to the advancement fuel cell and vehicle technologies.« less

  9. On the image of AGS 3He 2+ $$\\vec{n}$$ 0 in the blue

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Meot, F.; Huang, H.; Tsoupas, N.

    This note addresses the transport of Helion spinmore » $$\\vec{n}$$ 0 vector, from its periodic orientation in the AGS to RHIC Blue ring injection kicker, via the AGS extraction system and the AtR line. The goal is to investigate optimal injection energy into RHIC, in the matter of Helion spin matching, in the hypothesis of equal warm and cold snake strengths in the AGS. The study uses recently computed OPERA 3-D field maps of the AGS cold snake, including possibility of independent solenoid and helix settings (as discussed in Tech. Note C-A/AP/485), together with the machinery of the AGS and AtR models developed in the stepwise ray-tracing code Zgoubi. Computing tools and methods employed are discussed as well, in order to facilitate possible further checks or investigations. They are however similar to those used in an earlier study regarding the image in RHIC Blue and Yellow of AGS $$\\vec{n}$$ 0 via the AtR in the case of proton beam (Tech. Note C-A/AP/502), which can be referred to for additional details.« less

  10. IARC - Illinois Accelerator Research Center | Pilot Program

    Science.gov Websites

    Toggle navigation Pilot Program Agenda Directions Registration Illinois Accelerator Research Center National Laboratory present Accelerator Stewardship Test Facility Pilot Program Use accelerator technology , energy and environment. With this pilot program, the DOE Office of Science National Laboratories are

  11. 75 FR 473 - Community Express Pilot Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-05

    ... SMALL BUSINESS ADMINISTRATION Community Express Pilot Program AGENCY: U.S. Small Business Administration (SBA). ACTION: Notice of extension of the Community Express Pilot Program. SUMMARY: This notice extends the Community Express Pilot Program in its current form through December 31, 2010. Based upon the...

  12. 78 FR 77534 - Self-Regulatory Organizations; C2 Options Exchange, Incorporated; Notice of Filing and Immediate...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-23

    ... further analysis of the Pilot Program and a determination of how the Program shall be structured in the... Program will allow for further analysis of the Pilot Program and a determination of how the Pilot Program should be structured in the future. During this extension of the Pilot Program, C2 proposes that it may...

  13. NASA Tech Briefs, June 1988. Volume 12, No. 6

    NASA Technical Reports Server (NTRS)

    1988-01-01

    Topics covered: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

  14. LASER Tech Briefs, Winter 1994. Volume 2, No. 1

    NASA Technical Reports Server (NTRS)

    Schnirring, Bill (Editor)

    1994-01-01

    Topics include: Electronic Components and Circuits. Electronic Systems, Physical Sciences, Materials, Computer Programs, Mechanics, Machinery, Fabrication Technology, Mathematics and Information Sciences, Life Sciences, and Books and reports

  15. NASA Tech Briefs, May 1993. Volume 17, No. 5

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Topics include: Advanced Composites and Plastics; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  16. Annual Review of Research Under the Joint Services Electronics Program.

    DTIC Science & Technology

    1978-10-01

    Electronic Science at Texas Tech University. Specific topics covered include fault analysis, Stochastic control and estimation, nonlinear control, multidimensional system theory , Optical noise, and pattern recognition.

  17. NASA Tech Briefs, February 1992. Volume 16, No. 2

    NASA Technical Reports Server (NTRS)

    1992-01-01

    Topics covered include: New Product Development; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  18. NASA Tech Briefs, September 2000. Volume 24, No. 9

    NASA Technical Reports Server (NTRS)

    2000-01-01

    Topics include: Sensors; Test and Measurement; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Bio-Medical; semiconductors/ICs; Books and Reports.

  19. NASA Tech Briefs, July 1993. Volume 17, No. 7

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Topics include: Data Acquisition and Analysis: Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  20. NASA Tech Briefs, June 1992. Volume 16, No. 6

    NASA Technical Reports Server (NTRS)

    1992-01-01

    Topics covered include: New Product Ideas; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  1. NASA Tech Briefs, December 1994. Volume 18, No. 12

    NASA Technical Reports Server (NTRS)

    1994-01-01

    Topics: Test and Measurement; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication; Mathematics and Information Sciences; Life Sciences; Books and Reports

  2. NASA Tech Briefs, January 1995. Volume 19, No. 1

    NASA Technical Reports Server (NTRS)

    1995-01-01

    Topics include: Sensors; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences; Books and Reports

  3. NASA Tech Briefs, April 1988. Volume 12, No. 4

    NASA Technical Reports Server (NTRS)

    1988-01-01

    Topics include: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

  4. NASA Tech Briefs, June 1996. Volume 20, No. 6

    NASA Technical Reports Server (NTRS)

    1996-01-01

    Topics: New Computer Hardware; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences;Books and Reports.

  5. NASA Tech Briefs, July 1989. Volume 13, No. 7

    NASA Technical Reports Server (NTRS)

    1989-01-01

    Topics include New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials;;Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences.

  6. 77 FR 18793 - Spectrum Sharing Innovation Test-Bed Pilot Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-28

    .... 120322212-2212-01] Spectrum Sharing Innovation Test-Bed Pilot Program AGENCY: National Telecommunications... Innovation Test-Bed pilot program to assess whether devices employing Dynamic Spectrum Access techniques can... Spectrum Sharing Innovation Test-Bed (Test-Bed) pilot program to examine the feasibility of increased...

  7. An Assessment of Air Force Development Portfolio Management Practices

    DTIC Science & Technology

    2002-01-01

    of Product Innovation Management , 12, 235–246. Cooper, R. G., & Kleinschmidt, E. J. (1995). Benchmarking the firm’s criti- cal success factors in new...product development. Journal of Product Innovation Management , 12, 374– 391. Cooper, R. G., Edgett, S. J., & Klein- schmidt, E. J. (1998a). Best...Scott, G. M. (2000). Critical technology management issues of new product development in high-tech companies. Journal of Product Innovation Management , 17

  8. Spark Gap Electrode Erosion

    DTIC Science & Technology

    1984-12-01

    N~JFOSR-TR- 85-0282 o ~FINAL REPORT S SPARK GAP ELECTRODE EROSION 00i Air Force Office of Scientific Research Grant No. 84-0015- Approve", t’r p...OF MONITORING ORGANIZATION Texas Tech University IDibj Air Office of Scientific Research it- ADORESS rCat.. State and ZIP CG*, 7b. ADONESS ’CitY...spark gap was measured for various electrode, gas, and pressure combinations. A previously developed model of self breakdown voltage distribution was

  9. The Shock and Vibration Digest, Volume 17, Number 10

    DTIC Science & Technology

    1985-10-01

    Venkayya, V.B. and Tischler, V.A., 49. Calico , R.A., Jr. and Tnyfault, D.V., "Frequency Control and the Effect on the "Decoupled Large Space Structure...Hurwitz presented. The threshold concept is de- Numerical Structural Mechanics scribed, as are receiver operating charac- Branch (Code 1844 ) teristic...Part Vibration and Dynamics of Off Road Vehi- 2 - Realistic Complex Elements des M. Apetaur I.A. Craighead, P.R. Brown Prague Univ. of Tech

  10. Investigation of Radiation Effects on Semiconductor Devices and Integrated Circuits

    DTIC Science & Technology

    1988-09-16

    qualitativelysimilar to, and consistent with, findings at the two higher energies .) Results for irradiation of eightwhere q is the electronic charge, ni is the...COMMUNICATIONS R&D COMMAND ATTN: R BROWN ASSISTANT TO THE SECRETARY OF DEFENSE ATOMIC ENERGY U S ARMY ELECTRONIC TECH DEV LAB ATTN: EXECUTIVE ASSISTANT...Continue on reverse if necessary and identify by block number) Results of a study of radiation effects on electronic materials, devices, and integrated

  11. Physical Processes within the Nocturnal Stratus-Topped Boundary Layer. Revision

    DTIC Science & Technology

    1992-01-01

    applied to PBL parameter- ization by Chatfield and Brost (1987), Randall (1987), Wang and Albrecht (1990), and Randall et al. (1992). One of the closures...mecha- nism. Acknowledgments We thank Joost Businger, Don Lenschow, figa Paluch, Steve Siems, Steve Stage, Roland Stull, and George Young for helpful...Oncley, 1990: Flux measurement with conditional sampling. At- mos. Oceanic Tech., 7, 349-352. Chatfield, R. B., and R. A. Brost , 1987: A two-stream model

  12. Cal Tech's Program in Meteorology: 1933-1948.

    NASA Astrophysics Data System (ADS)

    Lewis, J. M.

    1994-01-01

    The California Institute of Technology (Cal Tech) established a course of study in meteorology in 1933. It was intimately tied to the upsurge of activity in commercial and military aviation that occurred in the period between the world wars. The tragic crash of the airship U.S.S. Akron provided the stimulus for including meteorology as a subprogram in the aeronautics department at Cal Tech. Thoodore von K´rm´n, head of the department and director of the school's Guggenheim Aeronautics Laboratory, masterminded the design of the program and geared it toward the solution of practical problems using the principles of dynamic meteorology. One of his doctoral students, Irving Krick, was groomed to develop the program.Robert Millikan, head of the institute, fostered an approach to science that encouraged the faculty to consuit and work with industry. In this environment, Krick established links with aviation, motion picture studios, and public utilities that would set the stage for the research thrust in meteorology. The program was primarily designed for training at the master' degree level, and a significant number of the graduates became entrepreneurs in meteorology. Based on letters of reminiscence and oral histories from some of these consulting meteorologists, it has been concluded that the Millikan/von K´rm´n philosophy of science played an important part in directing the meteorologists into the private sector.Following World War II, Lee DuBridge replaced Millikan as head of the institute. DuBridge's efforts were directed toward making the small elite school scientifically competitive in the changed conditions of a postwar world. In this climate, the merging of private business with academic work fell into disfavor. Without champions such as Millikan and von K´rm´n,the meteorology program was unable to survive.

  13. EC95-42939-3

    NASA Image and Video Library

    1995-02-02

    The support crew for the F-16A, the F-16XL no. 1, and the F-16 AFTI are, top row, left to right: Randy Weaver; mechanic, Susan Ligon; mechanic, Bob Garcia; Crew Chief, Rich Kelly; mechanic, Dale Edminister; Avionics Technician. Bottom row, left to right, Art Cope; mechanic, John Huffman; Avionics Technician, Jaime Garcia; Avionics Technician, Don Griffith, Avionics Tech. Co-op student. The F-16A (NASA 516), the only civil registered F-16 in existence, was transferred to Dryden from Langley, and was primarily used in engine tests and for parts. It was subsequently transfered from Dryden. The single-seat F-16XL no. 1 (NASA 849) was most recently used in the Cranked-Arrow Wing Aerodynamics Project (CAWAP) to test boundary layer pressures and distribution. Previously it had been used in a program to investigate the characteristics of sonic booms for NASA's High Speed Research Program. Data from the program will be used in the development of a high speed civilian transport. During the series of sonic boom research flights, the F-16XL was used to probe the shock waves being generated by a NASA SR-71 and record their shape and intensity. The Advanced Fighter Technology Integration (AFTI) F-16 was used to develop and demonstrate technologies to improve navigation and a pilot's ability to find and destroy enemy ground targets day or night, including adverse weather. Earlier research in the joint NASA-Air Force AFTI F-16 program demonstrated voice actuated controls, helmet-mounted sighting and integration of forward-mounted canards with the standard flight control system to achieve uncoupled flight.

  14. EC95-42939-5

    NASA Image and Video Library

    1995-02-02

    The support crew for the F-16A, the F-16XL no. 1, and the F-16 AFTI are, top row, left to right: Randy Weaver; mechanic, Susan Ligon; mechanic, Bob Garcia; Crew Chief, Rich Kelly; mechanic, Dale Edminister; Avionics Technician. Bottom row, left to right, Art Cope; mechanic, John Huffman; Avionics Technician, Jaime Garcia; Avionics Technician, Don Griffith, Avionics Tech. Co-op student. The F-16A (NASA 516), the only civil registered F-16 in existence, was transferred to Dryden from Langley, and was primarily used in engine tests and for parts. It was subsequently transfered from Dryden. The single-seat F-16XL no. 1 (NASA 849) was most recently used in the Cranked-Arrow Wing Aerodynamics Project (CAWAP) to test boundary layer pressures and distribution. Previously it had been used in a program to investigate the characteristics of sonic booms for NASA's High Speed Research Program. Data from the program will be used in the development of a high speed civilian transport. During the series of sonic boom research flights, the F-16XL was used to probe the shock waves being generated by a NASA SR-71 and record their shape and intensity. The Advanced Fighter Technology Integration (AFTI) F-16 was used to develop and demonstrate technologies to improve navigation and a pilot's ability to find and destroy enemy ground targets day or night, including adverse weather. Earlier research in the joint NASA-Air Force AFTI F-16 program demonstrated voice actuated controls, helmet-mounted sighting and integration of forward-mounted canards with the standard flight control system to achieve uncoupled flight.

  15. Telemedicine in the 'Hood.

    ERIC Educational Resources Information Center

    Elgrably, Jordan

    1998-01-01

    Telemedicine, the ability to examine patients while physically removed from them by using high-tech virtual treatment, is used increasingly to diagnose and prescribe treatment for patients in nontraditional settings. In Los Angeles (California), Charles R. Drew University of Medicine and King-Drew Medical Center communicate in real time with…

  16. Shopping for Jobs: Mall Internship Program Opens Doors for HVAC Students.

    ERIC Educational Resources Information Center

    Nolot, Terry

    1995-01-01

    Ivy Tech State College uses River Falls, a shopping mall, as an enormous heating, ventilation, and air conditioning laboratory. Students spend Saturdays working with full-time technicians getting invaluable training and experience. Students see the program as a professional opportunity and a direct route to jobs. (JOW)

  17. Department of Defense In-House RDT and E Activities

    DTIC Science & Technology

    1974-10-30

    SURGICAL RtStARCH FT. SAM HOUSTON. TX. CU. CUL BASIL A. PRUITT, JR. TECH. DIR. DR. ARTHUR D. MASON PROGRAM TOTAL RDTtfc...C0N1K0L AND SULIU WASTE AND PESTICIDE DISPOSAL. ...CURRENT IMPORTANT PROGRAMS .-„^r™ .DM CVWTH.^1«; UF NEW COMPUTER ANALYSIS OF

  18. Ohio Agricultural Business and Production Systems. Technical Competency Profile (TCP).

    ERIC Educational Resources Information Center

    Ray, Gayl M.; Kershaw, Isaac; Mokma, Arnie

    This document describes the essential competencies from secondary through post-secondary associate degree programs for a career in agricultural business and production systems. Following an introduction, the Ohio College Tech Prep standards and program, and relevant definitions are described. Next are the technical competency profiles for these…

  19. Exchanging Education and Culture.

    ERIC Educational Resources Information Center

    Gustafson, Christine; Knowlton, Leslie

    1993-01-01

    An eight-week residential program at the University of California at Irvine aims to increase representation of Native American students in high-tech fields and to encourage transfer of Native American students to four-year programs. Students spend four weeks in intensive computer science classes and four weeks serving as interns at sponsoring…

  20. Ohio Business Management. Technical Competency Profile (TCP).

    ERIC Educational Resources Information Center

    Ray, Gayl M.; Wilson, Nick; Mangini, Rick

    This document describes the essential competencies from secondary through post-secondary associate degree programs for a career in business management. Ohio College Tech Prep Program standards are described, and a key to profile codes is provided. Sample occupations in this career area, such as management trainee, product manager, and advertising…

  1. Long-Term Pavement Performance Program: Pavement Performance Measures and Forecasting and the Effects of Maintenance and Rehabilitation Strategy on Treatment Effectiveness [Tech Brief

    DOT National Transportation Integrated Search

    2016-08-01

    This document is a technical summary of the Federal Highway Administration Long-Term Pavement Performance Program report, Pavement Performance Measures and Forecasting and the Effects of Maintenance and Rehabilitation Strategy on Treatment Effectiven...

  2. The Art of Mentoring

    ERIC Educational Resources Information Center

    Reese, Susan

    2006-01-01

    Mentoring provides students with role models, inspiration and encouragement that helps paint the promise of a successful future. In this article, the author discusses examples of successful mentoring programs in career and technical education. Among them is the High Tech Girls Society (HTGS). The program was started in the 2003-2004 school year in…

  3. One Size Never Fits All: Tech Integration for Special Needs

    ERIC Educational Resources Information Center

    Courduff, Jennifer

    2011-01-01

    For more than seven years, Etiwanda School District in California has implemented a districtwide technology integration program that included beginning, intermediate, and advanced professional development training and support for general education teachers. Training included programs such as Intel Teach to the Future and the application of this…

  4. 12 CFR 703.19 - Investment pilot program.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Investment pilot program. 703.19 Section 703.19 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS INVESTMENT AND DEPOSIT ACTIVITIES § 703.19 Investment pilot program. (a) Under the investment pilot program, NCUA...

  5. 12 CFR 703.19 - Investment pilot program.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 6 2011-01-01 2011-01-01 false Investment pilot program. 703.19 Section 703.19 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS INVESTMENT AND DEPOSIT ACTIVITIES § 703.19 Investment pilot program. (a) Under the investment pilot program, NCUA...

  6. 77 FR 67433 - Community Advantage Pilot Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-09

    ... comments. SUMMARY: The Community Advantage (``CA'') Pilot Program is a pilot program to increase SBA... small businesses and entrepreneurs in underserved markets, SBA is issuing this Notice to extend the term... Pilot Program was introduced to increase the number of SBA-guaranteed loans made to small businesses in...

  7. 78 FR 60169 - Federal Acquisition Regulation; Pilot Program for Enhancement of Contractor Employee...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-30

    ... 9000-AM56 Federal Acquisition Regulation; Pilot Program for Enhancement of Contractor Employee... program enhancing whistleblower protections for contractor employees. DATES: Effective: September 30, 2013... contractor employees at FAR subpart 3.9. The pilot program is mandated by section 828, entitled ``Pilot...

  8. 78 FR 77526 - Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Notice of Filing and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-23

    ... analysis of the Pilot Program and a determination of how the Program shall be structured in the future. In.... CBOE believes that extending the Pilot Program will allow for further analysis of the Pilot Program and a determination of how the Pilot Program should be structured in the future. During this extension...

  9. NASA Tech Briefs, May 1991. Volume 15, No. 5

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Topics: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  10. NASA Tech Briefs, January 1991. Volume 15, No. 1

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Topics: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences;Life Sciences.

  11. NASA Tech Briefs, September 1991. Volume 15, No. 9

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Topics: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  12. NASA Tech Briefs, March 1996. Volume 20, No. 3

    NASA Technical Reports Server (NTRS)

    1996-01-01

    Topics: Computer-Aided Design and Engineering; Electronic Components and Cicuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information; Books and Reports.

  13. NASA Tech Briefs, June 1990. Volume 14, No. 6

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Topics: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  14. NASA Tech Briefs, August 1991. Volume 15, No. 8

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Topics: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  15. NASA Tech Briefs, February 1991. Volume 15, No. 2

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Topics: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  16. NASA Tech Briefs, March 1991. Volume 15, No. 3

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Topics: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  17. NASA Tech Briefs, December 1990. Volume 14, No. 12

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Topics: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  18. NASA Tech Briefs, September 1996. Volume 20, No. 9

    NASA Technical Reports Server (NTRS)

    1996-01-01

    Topics: Data Acquisition and Analysis; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Books and Reports.

  19. NASA Tech Briefs, June 1991. Volume 15, No. 6

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Topics: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  20. NASA Tech Briefs, August 1993. Volume 17, No. 8

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Topics include: Computer Graphics; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences; Books and Reports.

  1. NASA Tech Briefs, September 1993. Volume 17, No. 9

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Topics include: Microelectronics; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Life Sciences; Books and Reports.

  2. NASA Tech Briefs, September 1999. Volume 23, No. 9

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Topics discussed include: Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences;

  3. NASA Tech Briefs, May 1990. Volume 14, No. 5

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Topics: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  4. NASA Tech Briefs, March 1993. Volume 17, No. 3

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Topics include: Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences;

  5. NASA Tech Briefs, January 1994. Volume 18, No. 1

    NASA Technical Reports Server (NTRS)

    1994-01-01

    Topics include: Communications Technology; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences; Books and Reports.

  6. NASA Tech Briefs, November 1994. Volume 18, No. 11

    NASA Technical Reports Server (NTRS)

    1994-01-01

    Topics: Advanced Manufacturing; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Life Sciences; Books and Reports.

  7. NASA Tech Briefs, April 1991. Volume 15, No. 4

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Topics: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  8. NASA Tech Briefs, October 1990. Volume 14, No. 10

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Topics: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical' Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  9. NASA Tech Briefs, October 1991. Volume 15, No. 10

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Topics: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences.

  10. Pilot Programs in Vocational Agriculture. Agribusiness Programs for People; Final Report of Wisconsin's 5 Years of Pilot Programs in Agriculture.

    ERIC Educational Resources Information Center

    Thompson, John F.

    The committee for Vocational Agriculture Pilot Programs in Wisconsin was appointed in 1967; this report analyzes the impact of five years of pilot programs on Wisconsin's vocational agriculture as a whole. During this period, the committee granted funding to 34 vocational agriculture departments in the State. A wide variety of programs were…

  11. Pilot interaction with automated airborne decision making systems

    NASA Technical Reports Server (NTRS)

    Hammer, John M.

    1990-01-01

    Ways in which computers can aid the decision making of an human operator of an aerospace system are investigated. The approach taken is to aid rather than replace the human operator, because operational experience has shown that humans can enhance the effectiveness of systems. As systems become more automated, the role of the operator has shifted to that of a manager and problem solver. This shift has created the research area of how to aid the human in this role. Published research in four areas is described. A discussion is presented of the DC-8 flight simulator at Georgia Tech.

  12. 38 CFR 3.161 - Expedited Claims Adjudication Initiative-Pilot Program.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Adjudication Initiative-Pilot Program. 3.161 Section 3.161 Pensions, Bonuses, and Veterans' Relief DEPARTMENT... Claims § 3.161 Expedited Claims Adjudication Initiative—Pilot Program. Rules pertaining to the Expedited Claims Adjudication Initiative Pilot Program are set forth in part 20, subpart P, of this chapter...

  13. 77 FR 49782 - Extension of the Application Deadline for Humanitarian Awards Pilot Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-17

    ...] Extension of the Application Deadline for Humanitarian Awards Pilot Program AGENCY: United States Patent and... Trademark Office (USPTO) announced the Humanitarian Awards Pilot Program, which recognizes patent holders... extending the deadline for applications to the Humanitarian Awards Pilot Program by two months until October...

  14. 75 FR 39091 - Airport Privatization Pilot Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-07

    ... Privatization Pilot Program AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of Receipt and... application for participation in the airport privatization pilot program received under 49 U.S.C. 47134. The... application to the FAA for exemption under the pilot program. 49 U.S.C. 47134 establishes an airport...

  15. The CNSE Public-Private Partnership Paradigm: A Driver for New York State and U.S. Educational, Research and Economic Excellence in the 21st Century

    NASA Astrophysics Data System (ADS)

    Cupoli, Edward M.

    2009-10-01

    The College of Nanoscale Science and Engineering (CNSE) of the University at Albany-SUNY is the first college in the world dedicated to education, research, development, and deployment in the emerging disciplines of nanoscience, nanoengineering, nanobioscience, and nanoeconomics. Envisioned and developed as a bold and unique educational, technological and business paradigm, the CNSE model has produced outcomes that are both significant and unparalleled: preparation of a highly educated, highly skilled workforce that is critical to driving opportunity and growth at all levels; acceleration of nanoscale research and development that is vital to advancing the commercialization of cutting-edge technologies and applications; and, generation of unmatched high-tech investment and job creation that are serving to foster a positive economic and societal impact throughout New York State, while also enhancing national competitiveness in the global innovation economy of the 21^st century. In less than a decade of operation, CNSE has become a globally recognized entity. CNSE's Albany NanoTech Complex is the most advanced research enterprise of its kind at any university in the world: a 5 billion, 800,000-square-foot complex that continuously attracts corporate partners from around the world, offers students a one-of-a-kind academic experience, and educates society on the implications of advances in nanotechnology. CNSE's Albany NanoTech houses the only fully-integrated 300mm wafer, computer chip pilot prototyping and demonstration line within 80,000 square feet of Class 1 capable cleanrooms. More than 2,500 scientists, researchers, engineers, students, and faculty work on site at CNSE's Albany NanoTech, with a network of global corporate partners that includes more than 250 leading nanotechnology companies, such as IBM, AMD, GlobalFoundries, SEMATECH, Toshiba, ASML, Applied Materials, Tokyo Electron, Vistec Lithography and Atotech, among many others.

  16. ENVIRONMENTAL TECHNOLOGY VERIFICATION JOINT (NSF-EPA) VERIFICATION STATEMENT AND REPORT, PERFORMANCE OF INDUCTION MIXERS FOR DISINFECTION OF WET WEATHER FLOWS, US FILTER/STRANCO PRODUCTS WATER CHAMP R F SERIES CHEMICAL INDUCTION SYSTEM

    EPA Science Inventory

    The Wet-Weather Flow Technologies Pilot of the EPA's Technology Verification (ETV) Program under a partnership with NSF International has verified the performawnce of the USFilter/Stranco Products chemical induction mixer used for disinfection of wet-weather flows. The USFilter t...

  17. Comprehensive Flood Plain Studies Using Spatial Data Management Techniques.

    DTIC Science & Technology

    1978-06-01

    Hydrologic Engineer- ing Center computer programs that forecast urban storm water quality and dynamic in- stream water quality response to waste...determination. Water Quality The water quality analysis planned for the pilot study includes urban storm water quality forecasting and in-streamn...analysis is performed under the direction of Tony Thomas. Chief, Research Branch, by Jess Abbott for storm water quality analysis, R. G. Willey for

  18. A bill to establish a pilot program in certain United States district courts to encourage enhancement of expertise in patent cases among district judges.

    THOMAS, 111th Congress

    Sen. Specter, Arlen [R-PA

    2009-01-22

    Senate - 01/22/2009 Read twice and referred to the Committee on the Judiciary. (All Actions) Notes: For further action, see H.R.628, which became Public Law 111-349 on 1/4/2011. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

  19. The Laser Cutter: A Terrific Addition to Your Tech Program

    ERIC Educational Resources Information Center

    Buxton, Richard

    2007-01-01

    A laser cutter has found a very welcome home in the technology program at Thomas Jefferson High School for Science and Technology. It has proven an easy-to-use major addition. Lasers come in different types, sizes and power ratings, which means several things must be taken into consideration when selecting the right one for the technology program.…

  20. Collaborative Efforts Result in a Successful Field Based Program for the Preparation of Secondary Teachers in Social Studies.

    ERIC Educational Resources Information Center

    Askins, Billy E.; Logan, Neal; Nelson, Jill

    Collaborative efforts by Texas Tech University (TTU) and the Lubbock Independent School District (ISD) resulted in an innovative program to improve the preparation of secondary-level preservice teachers in social studies. The program is grounded in the realities of the social studies classroom. Students are organized by teaching field in a…

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top