42 CFR 136.370 - Pregraduate scholarship grants.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., preveterinary medicine, or prepodiatry curriculum or equivalent. (b) Students enrolled in accredited health..., audiology, medical technology, dental hygiene, dental technicians, engineering, radiologic technology...

42 CFR 136.370 - Pregraduate scholarship grants.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., preveterinary medicine, or prepodiatry curriculum or equivalent. (b) Students enrolled in accredited health..., audiology, medical technology, dental hygiene, dental technicians, engineering, radiologic technology...

42 CFR 136.370 - Pregraduate scholarship grants.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., preveterinary medicine, or prepodiatry curriculum or equivalent. (b) Students enrolled in accredited health..., audiology, medical technology, dental hygiene, dental technicians, engineering, radiologic technology...

Intraoperative monitoring technician: a new member of the surgical team.

PubMed

Brown, Molly S; Brown, Debra S

2011-02-01

As surgery needs have increased, the traditional surgical team has expanded to include personnel from radiology and perfusion services. A new surgical team member, the intraoperative monitoring technician, is needed to perform intraoperative monitoring during procedures that carry a higher risk of central and peripheral nerve injury. Including the intraoperative monitoring technician on the surgical team can create challenges, including surgical delays and anesthesia care considerations. When the surgical team members, including the surgeon, anesthesia care provider, and circulating nurse, understand and facilitate this new staff member's responsibilities, the technician is able to perform monitoring functions that promote the smooth flow of the surgical procedure and positive patient outcomes. Copyright © 2011 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Development and validation of a questionnaire to evaluate infection control in oral radiology.

PubMed

da Costa, Eliana D; Pinelli, Camila; da Silva Tagliaferro, Elaine P; Corrente, José E; Ambrosano, Glaucia M B

2017-04-01

To create and validate a questionnaire to evaluate infection control in oral radiology. The questionnaire was developed after review of the literature, which included published articles and the biosafety protocols available from healthcare agencies. The initial version of the questionnaire was composed of 14 multiple choice questions and was divided into 3 domains on handwashing, disinfection/protection of surfaces and disinfectant used. Content validity was assessed by two expert committees, which reviewed the content and scope of the questionnaire and the relevance of each item, respectively. Reliability was evaluated using test-retest and internal consistency methods with 115 undergraduate dentistry students. Construct validity was assessed using the known-groups technique and factor analysis. The known-groups technique involved 641 undergraduate dentistry students, 20 PhD students and 15 oral radiology professors. In the factor analysis, 3 radiology technicians also participated in addition to the 641 undergraduates, 20 PhD students and 15 oral radiology professors. The content validity results were found to be satisfactory to excellent for the ordinal variables (intraclass correlation coefficient = 0.722-1.000) and good to great for the yes/no questions (kappa = 0.662-0.913) in terms of reliability and good internal consistency (Cronbach's alpha = 0.88). After a factor analysis, some questions were excluded, and the questions were grouped into new domains. Significant differences were observed between answers from different groups. The final version of the questionnaire was composed of nine domains. The questionnaire created was found to exhibit good psychometric properties for assessing infection control in oral radiology.

Dental Technicians' Pneumoconiosis; Illness Behind a Healthy Smile – Case Series of a Reference Center in Turkey

PubMed Central

Alici, Nur Şafak; Beyan, Ayşe Coşkun; Demıral, Yücel; Çimrin, Arif

2018-01-01

Background: Dental laboratories include many hazards and risks. Dental technicians working in an unfavorable work environment in Turkey and other parts of the world may develop pneumoconiosis as a result of exposure to dust, depending on exposure time. In this study, we aimed to investigate the clinical and laboratory findings of dental technicians. Materials and Methods: The study consists of a case series. Between 2013 and 2016, a total of 70 who were working as a dental technician and referred to our clinic with suspicion of occupational disease were evaluated. Comprehensive work-history, physical examination complaints, functional status, chest X-ray, and high-resolution computed lung tomography (HRCT) findings were evaluated. Results: In all, 46 (65.7%) of the 70 dental technicians were diagnosed with pneumoconiosis. About 45 (97.8%) subjects were male and 1 (2.2%) was female. The mean age of starting to work was 15.89 ± 2.79 (11-23) years. The mix dust exposure time was 176.13 ± 73.97 (18-384) months. Small round opacities were most common finding. In 16 patients, high profusion being 2/3 and above were identified, and large opacity was detected in 11 patients. The radiological profusion had a weak negative correlation with FEV 1 and FVC (correlation coefficient − 0.18, P = 0.210 and − 0.058, P = 0704) and moderate negative correlation between radiological profusion and FEV1/FVC (correlation coefficient − 0.377, P = 0.010). In addition, no correlation was observed between the age at start of work and the duration of exposure. Conclusion: The presence of pneumoconiosis continues in dental technicians in Turkey, especially because there is an early childhood apprenticeship culture and almost all workers in this period have the history of sandblasting. PMID:29743783

[Position-checking by imaging embarked there tomotherapy and the delegation to the radiology technician].

PubMed

Autret, A; Choupeaux, D; Le Mée, M

2016-10-01

Tomotherapy is a technique of IMRT and IGRT using a linear accelerator and a helical CT-scanner. To reach this targeting of precision, the repositioning of the patient is essential. The use of a contention adapted according to the location of the disease and the morphology of the patient is necessary for the safety of this one and the treatment. Once the patient positioned on the reference table, technicians of imager's team check by the acquisition of helical imagery with the reference CT-scanner the position of the patient, the zone of the PTV and healthy organs in the protected surroundings. At first, adjustment will be made automatically on three planes of the space (axial, sagittal, frontal) and three rotations (pitch, roll and yaw) by the device of treatment, then the technicians of imagery will bring a modification of these recalls manually. After validation, the processing will then be made in complete safety for the patient and the nursing. This check by MVCT is daily before every session of processing. It is made by the technicians of imagery. The radiation oncologist confirms the images at j0, then controls once a week MVCT. Traceability in the file of the patient of the various marks (osseous and\\or soft tissue) necessary for the daily gaps will be noted by this one to delegate to the technicians of imagery the validation of the MVCT before every session. Copyright © 2016. Published by Elsevier SAS.

Evaluation of awareness on radiation protection and knowledge about radiological examinations in healthcare professionals who use ionized radiation at work.

PubMed

Yurt, Ayşegül; Cavuşoğlu, Berrin; Günay, Türkan

2014-06-01

In this study, we evaluated the knowledge and perception and mitigation of hazards involved in radiological examinations, focusing on healthcare personnel who are not in radiation-related occupations, but who use ionising radiation as a part of their work. A questionnaire was applied to physicians, nurses, technicians and other staff working in different clinics that use radiation in their work, in order to evaluate their knowledge levels about ionizing radiation and their awareness about radiation doses resulting from radiological examinations. The statistical comparisons between the groups were analyzed with the Kruskal Wallis test using the SPSS program. Ninety two participants took part in the study. Their level of knowledge about ionizing radiation and doses in radiological examinations were found to be very weak. The number of correct answers of physicians, nurses, medical technicians and other personnel groups were 15.7±3.7, 13.0±4.0, 10.1±2.9 and 11.8±4.0, respectively. In the statistical comparison between the groups, the level of knowledge of physicians was found to be significantly higher than the level of the other groups (p=0.005). The present study demonstrated that general knowledge in relation to radiation, radiation protection, health risks and doses used for radiological applications are insufficient among health professions using with ionizing radiation in their work.

Development and validation of a questionnaire to evaluate infection control in oral radiology

PubMed Central

Pinelli, Camila; da Silva Tagliaferro, Elaine P; Corrente, José E; Ambrosano, Glaucia M B

2017-01-01

Objectives: To create and validate a questionnaire to evaluate infection control in oral radiology. Methods: The questionnaire was developed after review of the literature, which included published articles and the biosafety protocols available from healthcare agencies. The initial version of the questionnaire was composed of 14 multiple choice questions and was divided into 3 domains on handwashing, disinfection/protection of surfaces and disinfectant used. Content validity was assessed by two expert committees, which reviewed the content and scope of the questionnaire and the relevance of each item, respectively. Reliability was evaluated using test–retest and internal consistency methods with 115 undergraduate dentistry students. Construct validity was assessed using the known-groups technique and factor analysis. The known-groups technique involved 641 undergraduate dentistry students, 20 PhD students and 15 oral radiology professors. In the factor analysis, 3 radiology technicians also participated in addition to the 641 undergraduates, 20 PhD students and 15 oral radiology professors. Results: The content validity results were found to be satisfactory to excellent for the ordinal variables (intraclass correlation coefficient = 0.722–1.000) and good to great for the yes/no questions (kappa = 0.662–0.913) in terms of reliability and good internal consistency (Cronbach's alpha = 0.88). After a factor analysis, some questions were excluded, and the questions were grouped into new domains. Significant differences were observed between answers from different groups. The final version of the questionnaire was composed of nine domains. Conclusions: The questionnaire created was found to exhibit good psychometric properties for assessing infection control in oral radiology. PMID:28112553

42 CFR 136.370 - Pregraduate scholarship grants.

Code of Federal Regulations, 2010 CFR

2010-10-01

... education leading to a baccalaureate degree in a premedicine, preoptometry, predentistry, preosteopathy..., audiology, medical technology, dental hygiene, dental technicians, engineering, radiologic technology, dietitian, nutritionist, social work, health education, physical therapy, occupational therapy and pharmacy...

Mammographic Breast Density in a Cohort of Medically Underserved Women

DTIC Science & Technology

2014-10-01

chronic diseases, adult weight history, diet , and health literacy. A trained radiologic technician completed full- field digital screening mammograms on... Mediterranean population. Int J Cancer 118:1782-1789 12. El-Bastawissi AY, White E, Mandelson MT, Taplin S (2001) Variation in mammographic breast

20 CFR 718.202 - Determining the existence of pneumoconiosis.

Code of Federal Regulations, 2010 CFR

2010-04-01

... radiologic technologist or technician and there is no evidence that the claim has been fraudulently... term other evidence means medical tests such as blood-gas studies, pulmonary function studies or physical examinations or medical histories which establish the presence of a chronic pulmonary, respiratory...

Risk of occupational radiation-induced cataract in medical workers.

PubMed

Milacic, Snezana

2009-01-01

ionizing radiation on the lens of the eye can produce a progressive cataract. Small cumulative doses, over a long time period, can produce adverse effects on the professional capabilities of health workers in the ionizing radiation zone. The aim of this study was to ascertain whether occupational exposure to low levels of ionizing radiation can cause an increase in prevalence of cataract. We compared a group with occupational cataract, consisting of 115 health workers in the ionizing radiation zone, and two control groups: a group of 100 health-care workers in the ionizing radiation zone, with a higher incidence of chromosomal aberrations, but without cataract; and another control group of 26 health-care workers with cataract, outside the zone; all risk factors for the development of cataract were considered: age, sex, diference in profession, duration of occupational exposure, years of service, level of blood sugar, blood pressure, arrhythmias, etc. A more significant incidence of cataract was found in workers in the ionizing radiation zone, where the relative risk was 4.6; p < 0.01. Radiology technicians showed the highest prevalence (63.5%), while physicians-radiologists and pneumologists were second (15.7%) and third (10.3%) respectively; nurses showed a 3.5% incidence and nuclear medicine department workers showed an incidence of only 1.7%. Other risk factors had an effect on the development of cataract (p < 0.05). Occupational exposure to low doses of ionizing radiation, together with other risk factors, is a significant cofactor in the occurrence of cataract as an occupational disease among x-ray exposed health care workers. The categories most at risk are radiology technicians,followed by radiologists.

Air and smear sample calculational tool for Fluor Hanford Radiological control

DOE Office of Scientific and Technical Information (OSTI.GOV)

BAUMANN, B.L.

2003-07-11

A spreadsheet calculation tool was developed to automate the calculations performed for determining the concentration of airborne radioactivity and smear counting as outlined in HNF-13536, Section 5.2.7, ''Analyzing Air and Smear Samples''. This document reports on the design and testing of the calculation tool. Radiological Control Technicians (RCTs) will save time and reduce hand written and calculation errors by using an electronic form for documenting and calculating work place air samples. Current expectations are RCTs will perform an air sample and collect the filter or perform a smear for surface contamination. RCTs will then survey the filter for gross alphamore » and beta/gamma radioactivity and with the gross counts utilize either hand calculation method or a calculator to determine activity on the filter. The electronic form will allow the RCT with a few key strokes to document the individual's name, payroll, gross counts, instrument identifiers; produce an error free record. This productivity gain is realized by the enhanced ability to perform mathematical calculations electronically (reducing errors) and at the same time, documenting the air sample.« less

20 CFR 718.202 - Determining the existence of pneumoconiosis.

Code of Federal Regulations, 2012 CFR

2012-04-01

... radiologist or qualified radiologic technologist or technician and there is no evidence that the claim has... with this paragraph. (A) The term other evidence means medical tests such as blood-gas studies, pulmonary function studies or physical examinations or medical histories which establish the presence of a...

20 CFR 718.202 - Determining the existence of pneumoconiosis.

Code of Federal Regulations, 2011 CFR

2011-04-01

... radiologist or qualified radiologic technologist or technician and there is no evidence that the claim has... with this paragraph. (A) The term other evidence means medical tests such as blood-gas studies, pulmonary function studies or physical examinations or medical histories which establish the presence of a...

20 CFR 718.202 - Determining the existence of pneumoconiosis.

Code of Federal Regulations, 2014 CFR

2014-04-01

... radiologist or qualified radiologic technologist or technician and there is no evidence that the claim has... with this paragraph. (A) The term other evidence means medical tests such as blood-gas studies, pulmonary function studies or physical examinations or medical histories which establish the presence of a...

20 CFR 718.202 - Determining the existence of pneumoconiosis.

Code of Federal Regulations, 2013 CFR

2013-04-01

... radiologist or qualified radiologic technologist or technician and there is no evidence that the claim has... with this paragraph. (A) The term other evidence means medical tests such as blood-gas studies, pulmonary function studies or physical examinations or medical histories which establish the presence of a...

Task Analysis for Curriculum Design and Validation. Allied Health Professions Project.

ERIC Educational Resources Information Center

Byers, Bruce B.; And Others

This report contains an outline of the method and the rationale for a project whose purpose is to develop training programs which are relevant to the specific requirements of technical occupations in nine allied health professions. The nine professions are in (a) nursing, (b) inhalation therapy, (c) radiology (technician level), (d) clinical…

A case of hypersensitivity pneumonitis with giant cells in a female dental technician.

PubMed

Kim, Yong-Hyun; Chung, Yun Kyung; Kim, Changhwan; Nam, Eun Suk; Kim, Hyun-Jun; Joo, Youngsu

2013-10-04

Dental technicians are exposed to methyl methacrylate(MMA) and hard metal dusts while working, and several cases of hypersensitivity pneumonitis caused by the exposure have been reported. The authors experienced a case of hypersensitivity pneumonitis in a female dental technician who had 10 years' work experience and report the case with clinical evidence. The patient's work, personal, social, and past and present medical histories were investigated based on patient questioning and medical records. Furthermore, the workplace conditions and tools and materials the patient worked with were also evaluated. Next, the pathophysiology and risk factors of pneumonitis were studied, and studies on the relationship between hypersensitivity pneumonitis and a dental technician's exposure to dust were reviewed. Any changes in the clinical course of her disease were noted for evaluation of the work-relatedness of the disease. The patient complained of cough and sputum for 1 year. In addition, while walking up the stairs, the patient was not able to ascend without resting due to dyspnea. She visited our emergency department due to epistaxis, and secondary hypertension was incidentally suspected. Laboratory tests including serologic, electrolyte, and endocrinologic tests and a simple chest radiograph showed no specific findings, but chest computed tomography revealed a centrilobular ground-glass pattern in both lung fields. A transbronchial biopsy was performed, and bronchoalveolar washing fluid was obtained. Among the findings of the laboratory tests, microcalcification, noncaseating granuloma containing foreign body-type giant cells, and metal particles within macrophages were identified histologically. Based on these results, hypersensitivity pneumonitis was diagnosed. The patient stopped working due to admission, and she completely quit her job within 2 months of restarting work due to reappearance of the symptoms. In this study, the patient did not have typical radiologic findings, but pathological evaluation of the lung biopsy from the bronchoscope led to the suspicion of pneumonitis. Under the microscope, the sample contained fibrotic changes in the lung, multinucleated giant cells, and particles in macrophages and was diagnosed as dental technician pneumoconiosis by the pathology. Working as a dental technician had directly exposed her to light metal dust and MMA, and her clinical symptoms and radiologic findings subsided after withdrawal from exposure to the workplace. These outcomes led to the diagnosis of hypersensitity pneumonitis due to MMA exposure and strong work-relatedness.

Pneumoconiosis in different sectors and their differences in Turkey.

PubMed

Alıcı, Nur Şafak; Çımrın, Arif; Coşkun Beyan, Ayşe

2016-12-01

Pneumoconiosis which is one of the ancient diseases, still affects many workers throughout the world despite "existing" control programs. We add data from a single center reviewing risk factors for pneumoconiosis; evaluate functional and radiological findings in different sectors. We reviewed medical records of patients diagnosed with pneumoconiosis who were admitted to our center between the years 2013 and 2015. Several personal and occupational features, together with functional and radiologic data, were collected. 60 were young males. Twenty-four of the cases (39.3%) worked at dental technician, 24 cases (39.3%) were ceramic workers, 5 cases (8.2%) were sandblasters, 2 cases (3.3%) were welders, 3 cases (4.9%) were miners, and 3 cases (4.9%) were marble cutters. The sectors in which the exposure started at the earliest ages were dental technicians and sandblasters, while the shortest working time was in sandblasting. The dental technicians were younger than the ceramic workers at the age of diagnosis (Kruskall-Wallis p= 0.003). The exposure time of the sandblasters was significantly shorter, especially than the ceramic workers (Kruskall-Wallis p= 0.002). The cases have been referred to us with pneumoconiosis suspicion based on the radiographic findings in the PA chest roentgenogram performed during the periodic examinations at their work place; but unlike other studies, in our study, following the HRCT assessment, cases which did not present any visible pathology in the re-evaluation of their PA chest roentgenogram, but had HRCT findings have been diagnosed as pneumoconiosis. Among the 44 cases in which micro-nodules had been detected at their HRCT, 15 of them had been previously classified as profusion of small opacities 0/1 according to their PA chest roentgenogram findings. It has been seen that the HRCT findings differ among sectors. Ceramics workers and sandblasters had significantly more micro-nodules, while dental technicians had significantly more mediastinal lymphadenopathies (Chi square, p= 0.004 and p= 0.007 respectively). When the relationship between the existence of big opacities and complaints was studied, statistically significant weight loss was detected in cases which had C opacities (chi square p= 0.01). Statistically significant FEV1 decrease was observed in cases which had weight loss (independent samples t-test p= 0.046). It has been observed that when the profusion of small opacities increased, while there was no statistically significant functional status change in non-smokers, a significant functional impairment was observed in smokers. Pneumoconiosis still exists in Turkey. Even a short exposure time as 2 years can cause pneumoconiosis. Workers in different sectors had different functional, radiological properties and smoking can affect the diseases' course. There are serious limitations related to the surveillance of both the workplace environment and the employees' health in Turkey. Without institutional preventive measures, personal protection and surveillance examinations, occupational hazards will continue to cause premature deaths. Pneumoconiosis in different sectors is a prototype of uncontrolled industry in the developing world.

Benthic boundary layer processes in the Lower Florida Keys

USGS Publications Warehouse

Lavoie, D.L.; Richardson, M.D.; Holmes, C.

1997-01-01

This special issue of Geo-Marine Letters, "Benthic Boundary Layer Processes in the Lower Florida Keys," includes 12 papers that present preliminary results from the Key West Campaign. The Dry Tortugas and Marquesas Keys test sites were selected by a group of 115 scientists and technicians to study benthic boundary layer processes in a carbonate environment controlled by bioturbation and biogeochemical processes. Major activities included remote sediment classification; high-frequency acoustic scattering experiments; sediment sampling for radiological, geotechnical, biological, biogeochemical, physical, and geoacoustic studies; and hydrodynamic studies using an instrumented tetrapod. All these data are being used to improve our understanding of the effects of environmental processes on sediment structure and behavior.

A Radiological Assessment Skills Training Program for the Radiation Worker at Shoreham Nuclear Power Station.

ERIC Educational Resources Information Center

Engel, Leonard, Jr.

Radiation workers, by law, have the responsibility to maintain their exposure to radiation levels as low as possible. This responsibility has not been accepted. Instead, they have relied solely on the policing action of health physics (HP) technicians, thereby delegating their lawful responsibility. Continued overexposure in the U.S. nuclear power…

Occupational musculoskeletal pain in cardiac sonographers compared to peer employees: a multisite cross-sectional study.

PubMed

Orme, Nicholas M; Geske, Jeffrey B; Pislaru, Sorin V; Askew, John Wells; Lennon, Ryan J; Lewis, Bradley R; Rihal, Charanjit S; Pellikka, Patricia A; Singh, Mandeep

2016-11-01

The purpose of this study was to compare the prevalence and impact of work-related musculoskeletal pain in cardiac sonographers to a large control group of peer employees with similar demographics. Cardiac sonographers are known to have high levels of occupational musculoskeletal pain. Comparative studies with other employees within cardiology/radiology departments have never been performed. An electronic survey was administered to Mayo Clinic employees at six major patient care facilities in four different states. There were 2682 employees within the departments of cardiology and radiology who were contacted, and 1532 (57%) completed the survey. After excluding those who wore protective lead aprons, 517 employees comprised the control group and 66 cardiac sonographers made up the study group. Cardiac sonographers reported work-related musculoskeletal pain more frequently than the control group (88% vs 40%; P<.001). This association persisted after multivariable adjustment for age, sex, body mass index, length of current employment, and history of preexisting musculoskeletal pain (OR 11.6; [95% CI 5.32, 25.5]; P<.001). Cardiac sonographers sought medical care for their work-related pain more often (55% vs 21%; P<.001) and missed more work due to pain (35% vs 12%, P<.001). In a secondary analysis, cardiac sonographers also experienced more work-related musculoskeletal pain than nurses, technicians, and physicians working in the interventional laboratory who regularly wear a protective lead apron (P<.001). In this multisite cross-sectional study, cardiac sonographers experienced significantly more work-related pain and missed more work due to pain than peer employees within cardiology/radiology departments. © 2016, Wiley Periodicals, Inc.

Nuclear Technology Series. Course 33: Control Systems I.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 34: Control Systems II.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 14: Introduction to Quality Assurance/Quality Control.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 6: Instrumentation and Control of Reactors and Plant Systems.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Pneumoconiosis in dental technicians: HRCT and pulmonary function findings.

PubMed

Kahraman, H; Koksal, N; Cinkara, M; Ozkan, F; Sucakli, M H; Ekerbicer, H

2014-09-01

Pneumoconiosis is a form of diffuse interstitial lung disease, often resulting from occupational exposures. As dental prosthetic technicians (DPTs) build prostheses, they are exposed to many chemical materials that increase their risk of developing pneumoconiosis. To document pulmonary function and prevalence of pneumoconiosis in DPTs. A cross-sectional study of DPTs working in prosthetic laboratories who underwent pulmonary function test and high-resolution chest computed tomography (HRCT) scanning. There were 76 participants and pneumoconiosis was diagnosed in 46%. The most commonly seen radiological finding was round opacities, present in 38%. Agreement among HRCT readers was moderate to good. As defined by HRCT, emphysema was diagnosed more often in those with a longer occupational history or a history of smoking, and low carbon monoxide diffusion capacity (DLCO), but not in those with pneumoconiosis. Forced expiratory rate and DLCO were significantly lower in those who had worked 16 years or more (all P < 0.05). DLCO values were significantly lower in technicians with emphysema and in current smokers (all P < 0.01). Round opacities were also present in a substantial proportion of DPTs who had 15 years or less exposure. Because HRCT is able to detect radiological changes of occupational lung disease very early, the prevalence of pneumoconiosis in our participants was quite high. Pneumoconiosis identified by HRCT was present in almost half of DPTs surveyed. Appropriate education and workplace protection should be given to DPTs in order to prevent exposure to hazardous materials in dental prosthetics laboratories. © The Author 2014. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Lean manufacturing and Toyota Production System terminology applied to the procurement of vascular stents in interventional radiology.

PubMed

de Bucourt, Maximilian; Busse, Reinhard; Güttler, Felix; Wintzer, Christian; Collettini, Federico; Kloeters, Christian; Hamm, Bernd; Teichgräber, Ulf K

2011-08-01

OBJECTIVES: To apply the economic terminology of lean manufacturing and the Toyota Production System to the procurement of vascular stents in interventional radiology. METHODS: The economic- and process-driven terminology of lean manufacturing and the Toyota Production System is first presented, including information and product flow as well as value stream mapping (VSM), and then applied to an interdisciplinary setting of physicians, nurses and technicians from different medical departments to identify wastes in the process of endovascular stent procurement in interventional radiology. RESULTS: Using the so-called seven wastes approach of the Toyota Production System (waste of overproducing, waiting, transport, processing, inventory, motion and waste of defects and spoilage) as well as further waste characteristics (gross waste, process and method waste, and micro waste), wastes in the process of endovascular stent procurement in interventional radiology were identified and eliminated to create an overall smoother process from the procurement as well as from the medical perspective. CONCLUSION: Economic terminology of lean manufacturing and the Toyota Production System, especially VSM, can be used to visualise and better understand processes in the procurement of vascular stents in interventional radiology from an economic point of view.

Comparative cath-lab assessment of coronary stenosis by radiology technician, junior and senior interventional cardiologist in patients treated with coronary angioplasty.

PubMed

Brunetti, Natale Daniele; Delli Carri, Felice; Ruggiero, Maria Assunta; Cuculo, Andrea; Ruggiero, Antonio; Ziccardi, Luigi; De Gennaro, Luisa; Di Biase, Matteo

2014-03-01

Exact quantification of plaque extension during coronary angioplasty (PCI) usually falls on interventional cardiologist (IC). Quantitative coronary stenosis assessment (QCA) may be possibly committed to the radiology technician (RT), who usually supports cath-lab nurse and IC during PCI. We therefore sought to investigate the reliability of QCA performed by RT in comparison with IC. Forty-four consecutive patients with acute coronary syndrome underwent PCI; target coronary vessel size beneath target coronary lesion (S) and target coronary lesion length (L) were assessed by the RT, junior IC (JIC), and senior IC (SIC) and then compared. SIC evaluation, which determined the final stent selection for coronary stenting, was considered as a reference benchmark. RT performance with QCA support in assessing target vessel size and target lesion length was not significantly different from SIC (r = 0.46, p < 0.01; r = 0.64, p < 0.001, respectively) as well as JIC (r = 0.79, r = 0.75, p < 0.001, respectively). JIC performance was significantly better than RT in assessing target vessel size (p < 0.05), while not significant when assessing target lesion length. RT may reliably assess target lesion by using adequate QCA software in the cath-lab in case of PCI; RT performance does not differ from SIC.

Assessing Subjectivity in Sensor Data Post Processing via a Controlled Experiment

NASA Astrophysics Data System (ADS)

Jones, A. S.; Horsburgh, J. S.; Eiriksson, D.

2017-12-01

Environmental data collected by in situ sensors must be reviewed to verify validity, and conducting quality control often requires making edits in post processing to generate approved datasets. This process involves decisions by technicians, data managers, or data users on how to handle problematic data. Options include: removing data from a series, retaining data with annotations, and altering data based on algorithms related to adjacent data points or the patterns of data at other locations or of other variables. Ideally, given the same dataset and the same quality control guidelines, multiple data quality control technicians would make the same decisions in data post processing. However, despite the development and implementation of guidelines aimed to ensure consistent quality control procedures, we have faced ambiguity when performing post processing, and we have noticed inconsistencies in the practices of individuals performing quality control post processing. Technicians with the same level of training and using the same input datasets may produce different results, affecting the overall quality and comparability of finished data products. Different results may also be produced by technicians that do not have the same level of training. In order to assess the effect of subjective decision making by the individual technician on the end data product, we designed an experiment where multiple users performed quality control post processing on the same datasets using a consistent set of guidelines, field notes, and tools. We also assessed the effect of technician experience and training by conducting the same procedures with a group of novices unfamiliar with the data and the quality control process and compared their results to those generated by a group of more experienced technicians. In this presentation, we report our observations of the degree of subjectivity in sensor data post processing, assessing and quantifying the impacts of individual technician as well as technician experience on quality controlled data products.

[Image-guided radiotherapy and partial delegation to radiotherapy technicians: Clermont-Ferrand experience].

PubMed

Loos, G; Moreau, J; Miroir, J; Benhaïm, C; Biau, J; Caillé, C; Bellière, A; Lapeyre, M

2013-10-01

The various image-guided radiotherapy techniques raise the question of how to achieve the control of patient positioning before irradiation session and sharing of tasks between radiation oncologists and radiotherapy technicians. We have put in place procedures and operating methods to make a partial delegation of tasks to radiotherapy technicians and secure the process in three situations: control by orthogonal kV imaging (kV-kV) of bony landmarks, control by kV-kV imaging of intraprostatic fiducial goldmarkers and control by cone beam CT (CBCT) imaging for prostate cancer. Significant medical overtime is required to control these three IGRT techniques. Because of their competence in imaging, these daily controls can be delegated to radiotherapy technicians. However, to secure the process, initial training and regular evaluation are essential. The analysis of the comparison of the use of kV/kV on bone structures allowed us to achieve a partial delegation of control to radiotherapy technicians. Controlling the positioning of the prostate through the use and automatic registration of fiducial goldmarkers allows better tracking of the prostate and can be easily delegated to radiotherapy technicians. The analysis of the use of daily cone beam CT for patients treated with intensity modulated irradiation is underway, and a comparison of practices between radiotherapy technicians and radiation oncologists is ongoing to know if a partial delegation of this control is possible. Copyright © 2013. Published by Elsevier SAS.

Nuclear Technology Series. Course 27: Metrology.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Radiation protection program for early detection of breast cancer in a mammography facility

NASA Astrophysics Data System (ADS)

Villagomez Casimiro, Mariana; Ruiz Trejo, Cesar; Espejo Fonseca, Ruby

2014-11-01

Mammography is the best tool for early detection of Breast Cancer. In this diagnostic radiology modality it is necessary to establish the criteria to ensure the proper use and operation of the equipment used to obtain mammographic images in order to contribute to the safe use of ionizing radiation. The aim of the work was to implement at FUCAM-AC the radiation protection program which must be established for patients and radiation workers according to Mexican standards [1-4]. To achieve this goal, radiation protection and quality control manuals were elaborated [5]. Furthermore, a quality control program (QCP) in the mammography systems (analog/digital), darkroom included, has been implemented. Daily sensitometry, non-variability of the image quality, visualizing artifacts, revision of the equipment mechanical stability, compression force and analysis of repetition studies are some of the QCP routine tests that must be performed by radiological technicians of this institution as a set of actions to ensure the protection of patients. Image quality and patients dose assessment were performed on 4 analog equipment installed in 2 mobile units. In relation to dose assessment, all equipment passed the acceptance criteria (<3 mGy per projection). The image quality test showed that most images (70%)- presented artifacts. A brief summary of the results of quality control tests applied to the equipment and film processor are presented. To maintain an adequate level of quality and safety at FUCAM-AC is necessary that the proposed radiation protection program in this work is applied.

Nuclear Technology Series. Course 35: Systems and Components.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course l: Radiation Physics.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 10: Power Plant Systems.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 7: Reactor Operations.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 22: Advanced Radionuclide Analysis.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 19: Radiation Shielding.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 8: Reactor Safety.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutians in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 9: Reactor Auxiliary Systems.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 13: Power Plant Chemistry.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 17: Radiation Protection II.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 2: Radiation Protection I.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 12: Reactor Physics.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 28: Welding Inspection.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 30: Mechanical Inspection.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 23: Nuclear Chemical Processes.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 31: Quality-Assurance Practices.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 29: Civil/Structural Inspection.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 5: Introduction to Nuclear Systems.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 16: Mechanical Component Characteristics and Specifications.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 11: Radiation Detection and Measurement.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 4: Heat Transfer and Fluid Flow.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 20: Radiation Monitoring Techniques (Radiochemical).

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 24: Nuclear Systems and Safety.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 32: Nondestructive Examination (NDE) Techniques II.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 15: Metallurgy and Metals Properties.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 26: Nondestructive Examination (NDE) Techniques I.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 21: Radioactive Materials Disposal and Management.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 25: Radioactive Material Handling Techniques.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Nuclear Technology Series. Course 3: Principles of Process Instrumentation.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Will X-ray Safety Glasses Become Mandatory for Radiological Vascular Interventions?

PubMed

Thomas, Rohit Philip; Grau, Mathias; Eldergash, Osama; Kowald, Tobias; Schnabel, Johannes; Szczechowicz, Marcin; Chavan, Ajay

2018-07-01

The annual permissible radiation ocular lens dose has been reduced to 20 millisieverts (mSv) in the current European directive 2013/59/Euratom. The aim of this study was to evaluate the personal radiation dose for vascular interventions with special focus on ocular lens dose. From May 2016 to October 2016, the personal radiation doses of two interventionists and four technicians were prospectively recorded during 206 vascular interventions. The position of personnel, intervention type and fluoroscopy time were recorded. Parameters evaluated were total body dose measured by film dosimeter, hand dose measured by ring thermoluminescent dosimeter (TLD) and ocular lens dose measured by TLD placed in front of the safety glasses. Linear regression analysis was used to estimate the dose at 2 and 5 years. The ocular lens dose, hand and total body dose of the two interventionists were 11/5, 56/47 and 0.6 mSv each, respectively. The estimated 5-year ocular dose was 113.08 mSv (95% CI 38.2-187.97)/40.95 (95% CI 16.9-64.7). Similarly, hand dose was 608.4 mSv (95% CI 442.78-774.38)/514.47 (95% CI 329.83-699.10) and body dose 6.07 mSv (95% CI 4.70-8.22)/5.12 (95% CI 3.65-6.59), respectively. Amongst four technicians, only the first assistant showed recordings of 0.3 mSv body dose, 2 mSv ocular lens dose and 5 mSv hand dose. The yearly ocular lens dose, particularly for interventionists dealing with complex interventions, could cross the permitted yearly limit set by the new Euratom directive. Therefore, X-ray safety glasses would become mandatory for complex radiological vascular interventions. Level III, non-randomized controlled cohort/follow-up study.

Development and Testing of a Nuclear Quality Assurance/Quality Control Technician Curriculum. Final Report.

ERIC Educational Resources Information Center

Espy, John; And Others

A project was conducted to field test selected first- and second-year courses in a postsecondary nuclear quality assurance/quality control (QA/QC) technician curriculum and to develop the teaching/learning modules for seven technical specialty courses remaining in the QA/QC technician curriculum. The field testing phase of the project involved the…

Comparative cath-lab assessment of coronary stenosis by radiology technician, junior and senior interventional cardiologist in patients treated with coronary angioplasty

PubMed Central

Delli Carri, Felice; Ruggiero, Maria Assunta; Cuculo, Andrea; Ruggiero, Antonio; Ziccardi, Luigi; De Gennaro, Luisa; Di Biase, Matteo

2014-01-01

Background Exact quantification of plaque extension during coronary angioplasty (PCI) usually falls on interventional cardiologist (IC). Quantitative coronary stenosis assessment (QCA) may be possibly committed to the radiology technician (RT), who usually supports cath-lab nurse and IC during PCI. We therefore sought to investigate the reliability of QCA performed by RT in comparison with IC. Methods Forty-four consecutive patients with acute coronary syndrome underwent PCI; target coronary vessel size beneath target coronary lesion (S) and target coronary lesion length (L) were assessed by the RT, junior IC (JIC), and senior IC (SIC) and then compared. SIC evaluation, which determined the final stent selection for coronary stenting, was considered as a reference benchmark. Results RT performance with QCA support in assessing target vessel size and target lesion length was not significantly different from SIC (r = 0.46, p < 0.01; r = 0.64, p < 0.001, respectively) as well as JIC (r = 0.79, r = 0.75, p < 0.001, respectively). JIC performance was significantly better than RT in assessing target vessel size (p < 0.05), while not significant when assessing target lesion length. Conclusions RT may reliably assess target lesion by using adequate QCA software in the cath-lab in case of PCI; RT performance does not differ from SIC. PMID:24672672

Radiation protection program for early detection of breast cancer in a mammography facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mariana, Villagomez Casimiro, E-mail: marjim10-66@ciencias.unam.mx, E-mail: cesar@fisica.unam.mx; Cesar, Ruiz Trejo, E-mail: marjim10-66@ciencias.unam.mx, E-mail: cesar@fisica.unam.mx; Ruby, Espejo Fonseca

Mammography is the best tool for early detection of Breast Cancer. In this diagnostic radiology modality it is necessary to establish the criteria to ensure the proper use and operation of the equipment used to obtain mammographic images in order to contribute to the safe use of ionizing radiation. The aim of the work was to implement at FUCAM-AC the radiation protection program which must be established for patients and radiation workers according to Mexican standards [1–4]. To achieve this goal, radiation protection and quality control manuals were elaborated [5]. Furthermore, a quality control program (QCP) in the mammography systemsmore » (analog/digital), darkroom included, has been implemented. Daily sensitometry, non-variability of the image quality, visualizing artifacts, revision of the equipment mechanical stability, compression force and analysis of repetition studies are some of the QCP routine tests that must be performed by radiological technicians of this institution as a set of actions to ensure the protection of patients. Image quality and patients dose assessment were performed on 4 analog equipment installed in 2 mobile units. In relation to dose assessment, all equipment passed the acceptance criteria (<3 mGy per projection). The image quality test showed that most images (70%)– presented artifacts. A brief summary of the results of quality control tests applied to the equipment and film processor are presented. To maintain an adequate level of quality and safety at FUCAM-AC is necessary that the proposed radiation protection program in this work is applied.« less

Career Directions: HVACR Technician

ERIC Educational Resources Information Center

Moore, Pam

2005-01-01

Heating/ventilation/air conditioning/refrigeration (HVACR) technicians (also known as "heating and cooling technicians") are the people who install, maintain, test and repair the machines that control temperature, circulation, moisture and purity of air in residential, commercial and industrial buildings. These systems consist of a variety of…

HEPA Filter Disposal Write-Up 10/19/16

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loll, C.

Process knowledge (PK) collection on HEPA filters is handled via the same process as other waste streams at LLNL. The Field technician or Characterization point of contact creates an information gathering document (IGD) in the IGD database, with input provided from the generator, and submits it for electronic approval. This document is essentially a waste generation profile, detailing the physical, chemical as well as radiological characteristics, and hazards, of a waste stream. It will typically contain a general, but sometimes detailed, description of the work processes which generated the waste. It will contain PK as well as radiological and industrialmore » hygiene analytical swipe results, and any other analytical or other supporting knowledge related to characterization. The IGD goes through an electronic approval process to formalize the characterization and to ensure the waste has an appropriate disposal path. The waste generator is responsible for providing initial process knowledge information, and approves the IGD before it routed to chemical and radiological waste characterization professionals. This is the standard characterization process for LLNL-generated HEPA Filters.« less

Musculoskeletal injuries resulting from patient handling tasks among hospital workers.

PubMed

Pompeii, Lisa A; Lipscomb, Hester J; Schoenfisch, Ashley L; Dement, John M

2009-07-01

The purpose of this study was to evaluate musculoskeletal injuries and disorders resulting from patient handling prior to the implementation of a "minimal manual lift" policy at a large tertiary care medical center. We sought to define the circumstances surrounding patient handling injuries and to identify potential preventive measures. Human resources data were used to define the cohort and their time at work. Workers' compensation records (1997-2003) were utilized to identify work-related musculoskeletal claims, while the workers' description of injury was used to identify those that resulted from patient handling. Adjusted rate ratios were generated using Poisson regression. One-third (n = 876) of all musculoskeletal injuries resulted from patient handling activities. Most (83%) of the injury burden was incurred by inpatient nurses, nurses' aides and radiology technicians, while injury rates were highest for nurses' aides (8.8/100 full-time equivalent, FTEs) and smaller workgroups including emergency medical technicians (10.3/100 FTEs), patient transporters (4.3/100 FTEs), operating room technicians (3.1/100 FTEs), and morgue technicians (2.2/100 FTEs). Forty percent of injuries due to lifting/transferring patients may have been prevented through the use of mechanical lift equipment, while 32% of injuries resulting from repositioning/turning patients, pulling patients up in bed, or catching falling patients may not have been prevented by the use of lift equipment. The use of mechanical lift equipment could significantly reduce the risk of some patient handling injuries but additional interventions need to be considered that address other patient handling tasks. Smaller high-risk workgroups should not be neglected in prevention efforts.

Fluid Power Technician

ERIC Educational Resources Information Center

Moore, Pam

2008-01-01

Fluid power technicians, sometimes called hydraulic and pneumatic technicians, work with equipment that utilizes the pressure of a liquid or gas in a closed container to transmit, multiply, or control power. Working under the supervision of an engineer or engineering staff, they assemble, install, maintain, and test fluid power equipment.…

Technicians complete assembly of Hubble Space Telescope (HST) mockup at JSC

NASA Technical Reports Server (NTRS)

1989-01-01

Technicians complete assembly of the Hubble Space Telescope (HST) mockup at JSC's Mockup and Integration Laboratory (MAIL) Bldg 9A. In the foreground, a technician holds the controls for an overhead crane attached to one of the HST's high gain antennas (HGAs). Technicians on the ground prepare the HGA to be hoisted into position on the mockup's Support System Module (SSM) forward shell as others work on SSM from a cherry picker.

Quality Control Technician Curriculum. An Elusive Butterfly.

ERIC Educational Resources Information Center

Holler, Michael

Defining and developing a quality control technician curriculum for an associate degree program is a difficult and puzzling job. There are as many definitions of quality control and curriculum ideas as there are educators asked. However, one could start by dividing the field into its major areas--heavy manufacturing, maintenance, research, and…

How do laboratory technicians perceive their role in the tuberculosis diagnostic process? A cross-sectional study among laboratory technicians in health centers of Central Java Province, Indonesia.

PubMed

Widjanarko, Bagoes; Widyastari, Dyah Anantalia; Martini, Martini; Ginandjar, Praba

2016-01-01

Detection of acid-fast bacilli in respiratory specimens serves as an initial pulmonary tuberculosis (TB) diagnosis. Laboratories are the essential and fundamental part of all health systems. This study aimed to describe how laboratory technicians perceived their own self and work. This included perceived self-efficacy, perceived role, perceived equipment availability, perceived procedures, perceived reward and job, and perceived benefit of health education, as well as level of knowledge and attitudes related to work performance of laboratory technicians. This was a cross-sectional quantitative study involving 120 laboratory technicians conducted in Central Java. Interviews and observation were conducted to measure performance and work-related variables. Among 120 laboratory technicians, 43.3% showed fairly good performance. They complied with 50%-75% of all procedures, including sputum collection, laboratory tools utilization, sputum smearing, staining, smear examination, grading of results, and universal precaution practice. Perceived role, perceived self-efficacy, and knowledge of laboratory procedures were significantly correlated to performance, besides education and years of working as a laboratory technician. Perceived equipment availability was also significantly correlated to performance after the education variable was controlled. Most of the laboratory technicians believed that they have an important role in TB patients' treatment and should display proper self-efficacy in performing laboratory activities. The result may serve as a basic consideration to develop a policy for enhancing motivation of laboratory technicians in order to improve the TB control program.

Radiation and cataract.

PubMed

Rehani, Madan M; Vano, Eliseo; Ciraj-Bjelac, Olivera; Kleiman, Norman J

2011-09-01

When this paper was about to go to press, the International Commission on Radiological Protection released a statement recommending a change in the threshold dose for the eye lens and dose limits for eye for occupationally exposed persons. It is clear that the earlier published threshold for radiation cataract is no longer valid. Epidemiological studies among Chernobyl clean-up workers, A bomb survivors, astronauts, residents of contaminated buildings, radiological technicians and recent surveys of staff in interventional rooms indicate that there is an increased incidence of lens opacities at doses below 1 Gy. Nevertheless, eye lens dosimetry is at a primitive stage and needs to be developed further. Despite uncertainties concerning dose threshold and dosimetry, it is possible to significantly reduce the risk of radiation cataract through the use of appropriate eye protection. By increasing awareness among those at risk and better adoption and increased usage of protective measures, radiation cataract can become preventable despite lowering of dose limits.

Human radiation studies: Remembering the early years. Oral history of radiologist Earl R. Miller, M.D., August 9 and 17, 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-06-01

Dr. Earl R. Miller was interviewed by representatives of US DOE Office of Human Radiation Research (OHRE). The interview covers Dr. Miller`s involvement with the Manhattan Engineer District, with total body irradiation, and heavy-ion therapy. Dr. Miller`s remembrances include wartime work on radiation exposure, Joe Hamilton, Neutron Therapy research, means of obtaining isotopes, consent forms, infinite laminograms, invention of a baby holder to alleviate exposure of radiological technicians in diagnostic procedures involving infants, and several personages.

Prevalence of high frequency hearing loss consistent with noise exposure among people working with sound systems and general population in Brazil: A cross-sectional study

PubMed Central

El Dib, Regina P; Silva, Edina MK; Morais, José F; Trevisani, Virgínia FM

2008-01-01

Background Music is ever present in our daily lives, establishing a link between humans and the arts through the senses and pleasure. Sound technicians are the link between musicians and audiences or consumers. Recently, general concern has arisen regarding occurrences of hearing loss induced by noise from excessively amplified sound-producing activities within leisure and professional environments. Sound technicians' activities expose them to the risk of hearing loss, and consequently put at risk their quality of life, the quality of the musical product and consumers' hearing. The aim of this study was to measure the prevalence of high frequency hearing loss consistent with noise exposure among sound technicians in Brazil and compare this with a control group without occupational noise exposure. Methods This was a cross-sectional study comparing 177 participants in two groups: 82 sound technicians and 95 controls (non-sound technicians). A questionnaire on music listening habits and associated complaints was applied, and data were gathered regarding the professionals' numbers of working hours per day and both groups' hearing complaint and presence of tinnitus. The participants' ear canals were visually inspected using an otoscope. Hearing assessments were performed (tonal and speech audiometry) using a portable digital AD 229 E audiometer funded by FAPESP. Results There was no statistically significant difference between the sound technicians and controls regarding age and gender. Thus, the study sample was homogenous and would be unlikely to lead to bias in the results. A statistically significant difference in hearing loss was observed between the groups: 50% among the sound technicians and 10.5% among the controls. The difference could be addressed to high sound levels. Conclusion The sound technicians presented a higher prevalence of high frequency hearing loss consistent with noise exposure than did the general population, although the possibility of residual confounding due to unmeasured factors such as socioeconomic status cannot be ruled out. PMID:18462490

V-TECS Guide for Automobile Engine Performance Technician.

ERIC Educational Resources Information Center

Meyer, Calvin F.; Benson, Robert T.

This guide is intended to assist teachers responsible for instructing future auto engine performance technicians. The following topics are covered: diagnosing engine performance problems, ignition system problems, fuel system problems, mechanically related performance problems, emission control system problems, and electronic control systems;…

1. CHANNEL DIMENSIONS AND ALIGNMENT RESEARCH INSTRUMENTATION. ENGINEERING TECHNICIAN WITH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. CHANNEL DIMENSIONS AND ALIGNMENT RESEARCH INSTRUMENTATION. ENGINEERING TECHNICIAN WITH VIDEO-CONTROLED MODEL BOAT IN MODEL NAVIGATION CHANNEL. NOTE CONTROL TRAILER IN BACKGROUND. - Waterways Experiment Station, Hydraulics Laboratory, Halls Ferry Road, 2 miles south of I-20, Vicksburg, Warren County, MS

How do laboratory technicians perceive their role in the tuberculosis diagnostic process? A cross-sectional study among laboratory technicians in health centers of Central Java Province, Indonesia

PubMed Central

Widjanarko, Bagoes; Widyastari, Dyah Anantalia; Martini, Martini; Ginandjar, Praba

2016-01-01

Purpose Detection of acid-fast bacilli in respiratory specimens serves as an initial pulmonary tuberculosis (TB) diagnosis. Laboratories are the essential and fundamental part of all health systems. This study aimed to describe how laboratory technicians perceived their own self and work. This included perceived self-efficacy, perceived role, perceived equipment availability, perceived procedures, perceived reward and job, and perceived benefit of health education, as well as level of knowledge and attitudes related to work performance of laboratory technicians. Methods This was a cross-sectional quantitative study involving 120 laboratory technicians conducted in Central Java. Interviews and observation were conducted to measure performance and work-related variables. Results Among 120 laboratory technicians, 43.3% showed fairly good performance. They complied with 50%–75% of all procedures, including sputum collection, laboratory tools utilization, sputum smearing, staining, smear examination, grading of results, and universal precaution practice. Perceived role, perceived self-efficacy, and knowledge of laboratory procedures were significantly correlated to performance, besides education and years of working as a laboratory technician. Perceived equipment availability was also significantly correlated to performance after the education variable was controlled. Conclusion Most of the laboratory technicians believed that they have an important role in TB patients’ treatment and should display proper self-efficacy in performing laboratory activities. The result may serve as a basic consideration to develop a policy for enhancing motivation of laboratory technicians in order to improve the TB control program. PMID:27660502

[Organic dementia among dental technicians. A cross-sectional study of dental technicians with opticians as the control group].

PubMed

Prescott, E; Steendahl, U; Damsgaard, M T

1989-07-17

The preparation methyl metacrylate (MMA) an organic solvent which is employed inter alii in the production of prostheses, is regarded as neurotoxic. With the object of illustrating to what extent dental technicians have symptoms compatible with organic dementia as compared with a control group, a cross-sectional questionnaire investigation was undertaken in a population consisting of 256 dental technicians and 160 opticians, all of whom were professionally active. The percentage replies for the two groups were 88 and 85 respectively. The two groups do not differ from one another as regards background variables with the exception of age and adjustments are made for this in the analysis. The results demonstrate that there is a statistically higher prevalence of the majority of acute and also chronic symptoms among dental technicians than among opticians. The symptom pattern and the presence of information and selection bias are discussed and it is concluded that this investigation confirms the hypothesis that symptoms compatible with organic dementia are commoner among dental technicians. The results raise the suspicion that MMA may cause acute and chronic damage to the central nervous system, even after very slight exposure. Revision of the occupational environment of dental technicians, including the current hygienic limits for MMA, is recommended.

[Organic dementia among dental technicians: a cross-sectional investigation of dental technicians using opticians as control].

PubMed

Prescott, E; Steendahl, U; Damsgaard, M T

1989-10-01

The preparation methylmethacrylate (MMA) an organic solvent which is employed inter alii in the production of prostheses, is regarded as neurotoxic. With the object of illustrating to what extent dental technicians have symptoms compatible with organic dementia as compared with a control group, a cross-sectional questionnaire investigation was undertaken in a population consisting of 256 dental technicians and 160 opticians, all of whom were professionally active. The percentage replies for the two group were 88 and 85 respectively. The two groups do not differ from one another as regards background variables with the exception of age and adjustments are made for this in the analysis. The results demonstrate that there is a statistically higher prevalence of the majority of acute and also chronic symptoms among dental technicians than among opticians. The symptom pattern and the presence of information and selection bias are discussed and it is concluded that this investigation confirms the hypothesis that symptoms compatible with organic dementia are commoner among dental technicians. The results raise the suspicion that MMA may cause acute and chronic damage to the central nervous system, even after very slight exposure. Revision of the occupational environment of dental technicians, including the current hygienic limits for MMA, is recommended.

Advancing Your Career at LLNL: Meet NIF’s Radiation Control Technicians

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zarco, Judy; Gutierrez, Myrna; Beale, Richard

2017-04-26

Myrna Gutierrez and Judy Zarco took advantage of LLNL's legacy of encouraging continuing education to get the necessary degrees and training to advance their careers at the Lab. As Radiation Control Technicians, they help maintain safety at the National Ignition Facility.

Are the urology operating room personnel aware about the ionizing radiation?

PubMed Central

Tok, Adem; Akbas, Alparslan; Aytan, Nimet; Aliskan, Tamer; Cicekbilek, Izzet; Kaba, Mehmet; Tepeler, Abdulkadir

2015-01-01

ABSTRACT Purpose: We assessed and evaluated attitudes and knowledge regarding ionizing radiation of urology surgery room staff. Materials and Methods: A questionnaire was sent by e-mail to urology surgery room personnel in Turkey, between June and August 2013. The questionnaire included demographic questions and questions regarding radiation exposure and protection. Results: In total, 127 questionnaires were answered. Of them, 62 (48.8%) were nurses, 51 (40.2%) were other personnel, and 14 (11%) were radiological technicians. In total, 113 (89%) participants had some knowledge of radiation, but only 56 (44.1%) had received specific education or training regarding the harmful effects of radiation. In total, 92 (72.4%) participants indicated that they used a lead apron and a thyroid shield. In the subgroup that had received education about the harmful effects of radiation, the use ratio for all protective procedures was 21.4% (n=12); this ratio was only 2.8% (n=2) for those with no specific training; the difference was statistically significant (p=0.004). Regarding dosimeters, the use rates were 100% for radiology technicians, 46.8% for nurses, and 31.4% for other hospital personnel; these differences were statistically significant (p<0.001). No significant relationship between working period in the surgery room, number of daily fluoroscopy procedures, education, task, and use of radiation protection measures was found. Conclusions: It is clear that operating room-allied health personnel exposed to radiation do not have sufficient knowledge of ionizing radiation and they do not take sufficient protective measures. PMID:26689525

Physical hazard safety awareness among healthcare workers in Tanta university hospitals, Egypt.

PubMed

El-Sallamy, Rania M; Kabbash, Ibrahim Ali; El-Fatah, Sanaa Abd; El-Feky, Asmaa

2017-05-17

Hospital workers are exposed to many occupational hazards that may threaten their health and safety. Physical hazards encountered in hospital working environment include temperature, illumination, noise, electrical injuries, and radiation. To assess the awareness of healthcare workers (HCWs) about physical hazards in Tanta university hospitals, this cross-sectional study included 401 HCWs (physicians, nurses, technicians, and workers) from seven departments (general surgery, orthopedics, radiology, ophthalmology, kitchen, incinerator, and laundry). Data were collected through interview questionnaire to assess six types of physical hazards (noise, electric hazards, temperature, radiation, fire, and lighting,). Most of the physicians (63.7%) were aware of the level of noise. All physicians, nurses, technicians, and majority of workers reported that hearing protective devices were not available, and all HCWs reported that periodic hearing examination was not performed. Most of the nurses (75.2%) and workers (68.5%) did not attended emergency training, and more than two thirds of all HCWs were not briefed about emergency evacuation. Most HCWs were not given appropriate radiation safety training before starting work (88% of workers, 73.7% of nurses, 65.7% of physicians, and 68.3% of technicians). The majority of physicians, nurses, and technicians (70.5, 65.4, and 53.7%) denied regular environmental monitoring for radiation level inside work place. Health education programs on health and safety issues regarding physical hazards should be mandatory to all healthcare workers to improve their awareness and protect them from undue exposures they may face due to lack of adequate awareness and knowledge. There is urgent need of expanding the occupational healthcare services in Egypt to cover all the employees as indicated by the international recommendations and the Egyptian Constitution, legislation, and community necessity.

Quality Control Technician.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document contains 18 units to consider for use in a tech prep competency profile for the occupation of quality control technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific occupation and…

Career Directions--Electronics Technician

ERIC Educational Resources Information Center

Tech Directions, 2012

2012-01-01

Electronics technicians (ETs) work with electronics engineers to set up and maintain complicated electronics equipment that many of today's businesses rely on. The field is varied. An ET might service the industrial controls on a factory floor. Or repair missile control systems for the government. Or an ET could specialize in cars and trucks,…

Instrumentation Control Technician.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document contains 22 units to consider for use in a tech prep competency profile for the occupation of instrumentation control technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific…

Remote Neural Pendants In A Welding-Control System

NASA Technical Reports Server (NTRS)

Venable, Richard A.; Bucher, Joseph H.

1995-01-01

Neural network integrated circuits enhance functionalities of both remote terminals (called "pendants") and communication links, without necessitating installation of additional wires in links. Makes possible to incorporate many features into pendant, including real-time display of critical welding parameters and other process information, capability for communication between technician at pendant and host computer or technician elsewhere in system, and switches and potentiometers through which technician at pendant exerts remote control over such critical aspects of welding process as current, voltage, rate of travel, flow of gas, starting, and stopping. Other potential manufacturing applications include control of spray coating and of curing of composite materials. Potential nonmanufacturing uses include remote control of heating, air conditioning, and lighting in electrically noisy and otherwise hostile environments.

Internet treatment for depression: a randomized controlled trial comparing clinician vs. technician assistance.

PubMed

Titov, Nickolai; Andrews, Gavin; Davies, Matthew; McIntyre, Karen; Robinson, Emma; Solley, Karen

2010-06-08

Internet-based cognitive behavioural therapy (iCBT) for depression is effective when guided by a clinician, less so if unguided. Would guidance from a technician be as effective as guidance from a clinician? Randomized controlled non-inferiority trial comparing three groups: Clinician-assisted vs. technician-assisted vs. delayed treatment. Community-based volunteers applied to the VirtualClinic (www.virtualclinic.org.au) research program, and 141 participants with major depressive disorder were randomized. Participants in the clinician- and technician-assisted groups received access to an iCBT program for depression comprising 6 online lessons, weekly homework assignments, and weekly supportive contact over a treatment period of 8 weeks. Participants in the clinician-assisted group also received access to a moderated online discussion forum. The main outcome measures were the Beck Depression Inventory (BDI-II) and the Patient Health QUESTIONnaire-9 Item (PHQ-9). Completion rates were high, and at post-treatment, both treatment groups reduced scores on the BDI-II (p<0.001) and PHQ-9 (p<0.001) compared to the delayed treatment group but did not differ from each other. Within group effect sizes on the BDI-II were 1.27 and 1.20 for the clinician- and technician-assisted groups respectively, and on the PHQ-9, were 1.54 and 1.60 respectively. At 4-month follow-up participants in the technician group had made further improvements and had significantly lower scores on the PHQ-9 than those in the clinician group. A total of approximately 60 minutes of clinician or technician time was required per participant during the 8-week treatment program. Both clinician- and technician-assisted treatment resulted in large effect sizes and clinically significant improvements comparable to those associated with face-to-face treatment, while a delayed treatment control group did not improve. These results provide support for large scale trials to determine the clinical effectiveness and acceptability of technician-assisted iCBT programs for depression. This form of treatment has potential to increase the capacity of existing mental health services. Australian New Zealand Clinical Trials Registry ACTRN12609000559213.

Internet Treatment for Depression: A Randomized Controlled Trial Comparing Clinician vs. Technician Assistance

PubMed Central

Titov, Nickolai; Andrews, Gavin; Davies, Matthew; McIntyre, Karen; Robinson, Emma; Solley, Karen

2010-01-01

Background Internet-based cognitive behavioural therapy (iCBT) for depression is effective when guided by a clinician, less so if unguided. Question: Would guidance from a technician be as effective as guidance from a clinician? Method Randomized controlled non-inferiority trial comparing three groups: Clinician-assisted vs. technician-assisted vs. delayed treatment. Community-based volunteers applied to the VirtualClinic (www.virtualclinic.org.au) research program, and 141 participants with major depressive disorder were randomized. Participants in the clinician- and technician-assisted groups received access to an iCBT program for depression comprising 6 online lessons, weekly homework assignments, and weekly supportive contact over a treatment period of 8 weeks. Participants in the clinician-assisted group also received access to a moderated online discussion forum. The main outcome measures were the Beck Depression Inventory (BDI-II) and the Patient Health Questionnaire-9 Item (PHQ-9). Completion rates were high, and at post-treatment, both treatment groups reduced scores on the BDI-II (p<0.001) and PHQ-9 (p<0.001) compared to the delayed treatment group but did not differ from each other. Within group effect sizes on the BDI-II were 1.27 and 1.20 for the clinician- and technician-assisted groups respectively, and on the PHQ-9, were 1.54 and 1.60 respectively. At 4-month follow-up participants in the technician group had made further improvements and had significantly lower scores on the PHQ-9 than those in the clinician group. A total of approximately 60 minutes of clinician or technician time was required per participant during the 8-week treatment program. Conclusions Both clinician- and technician-assisted treatment resulted in large effect sizes and clinically significant improvements comparable to those associated with face-to-face treatment, while a delayed treatment control group did not improve. These results provide support for large scale trials to determine the clinical effectiveness and acceptability of technician-assisted iCBT programs for depression. This form of treatment has potential to increase the capacity of existing mental health services. Trial Registration Australian New Zealand Clinical Trials Registry ACTRN12609000559213 PMID:20544030

Personnel and Training Requirements for the ASR-21 Rescue Control Center.

ERIC Educational Resources Information Center

DeLuca, Joseph F.; Noble, John F.

This report covers personnel and training requirements for Rescue Control Center (RCC) twin hull submarine rescue ships (ASRs). Skills and knowledge similar to those of a sonar technician (ST-0408) and a data system technician (DS-1666) are needed to operate the special sonar set and computer based system, but no suitable Navy training facility…

Description and comparison of pharmacy technician training programs in the United States.

PubMed

Anderson, Douglas C; Draime, Juanita A; Anderson, Timothy S

2016-01-01

To describe pharmacy technician training programs in the United States and to compare pharmacy technician program characteristics between programs with and without a pharmacist on faculty and between programs with different accreditation status. Descriptive, cross-sectional study. Not applicable. United States pharmacy technician programs. Not applicable. Student class size, faculty credentials, coursework components, program length, tuition rates, and admission criteria. Currently, there are more than 698 pharmacy technician programs across 1114 campuses, with complete data available for 216 programs. Programs varied widely in terms of class sizes, faculty credentials, and admission criteria. Programs with pharmacists on faculty were significantly less expensive than were those without pharmacists (P = 0.009). Accreditation had no impact on tuition prices. This is the first study of its kind to describe and characterize pharmacy technician training programs. There is relatively little control of technician training by the profession of pharmacy. The quality of these programs in terms of student outcomes is unknown, and it should be explored. Rigorous debate and discussion is needed regarding the future of pharmacy technician roles and the training required for those roles. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Utility of a Newly Designed Film Holder for Premolar Bitewing Radiography.

PubMed

Safi, Yaser; Esmaeelinejad, Mohammad; Vasegh, Zahra; Valizadeh, Solmaz; Aghdasi, Mohammad Mehdi; Sarani, Omid; Afsahi, Mahmoud

2015-11-01

Bitewing radiography is a valuable technique for assessment of proximal caries, alveolar crest and periodontal status. Technical errors during radiography result in erroneous radiographic interpretation, misdiagnosis, possible mistreatment or unnecessary exposure of patient for taking a repeat radiograph. In this study, we aimed to evaluate the efficacy of a film holder modified from the conventional one and compared it with that of conventional film holder. Our study population comprised of 70 patients who were referred to the Radiology Department for bilateral premolar bitewing radiographs as requested by their attending clinician. Bitewing radiographs in each patient were taken using the newly designed holder in one side and the conventional holder in the other side. The acceptability of the two holders from the perspectives of the technician and patients was determined using a 0-20 point scale. The frequency of overlap and film positioning errors was calculated for each method. The conventional holder had greater acceptability among patients compared to the newly designed holder (mean score of 16.59 versus 13.37). From the technicians' point of view, the newly designed holder was superior to the conventional holder (mean score of 17.33 versus 16.44). The frequency of overlap was lower using the newly designed holder (p<0.001) and it allowed more accurate film positioning (p=0.005). The newly designed holder may facilitate the process of radiography for technicians and may be associated with less frequency of radiographic errors compared to the conventional holder.

Federal Radiological Monitoring and Assessment Center Monitoring Manual Volume 1, Operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

NSTec Aerial Measurement Systems

2012-07-31

The Monitoring division is primarily responsible for the coordination and direction of: Aerial measurements to delineate the footprint of radioactive contaminants that have been released into the environment. Monitoring of radiation levels in the environment; Sampling to determine the extent of contaminant deposition in soil, water, air and on vegetation; Preliminary field analyses to quantify soil concentrations or depositions; and Environmental and personal dosimetry for FRMAC field personnel, during a Consequence Management Response Team (CMRT) and Federal Radiological Monitoring and Assessment Center (FRMAC) response. Monitoring and sampling techniques used during CM/FRMAC operations are specifically selected for use during radiological emergenciesmore » where large numbers of measurements and samples must be acquired, analyzed, and interpreted in the shortest amount of time possible. In addition, techniques and procedures are flexible so that they can be used during a variety of different scenarios; e.g., accidents involving releases from nuclear reactors, contamination by nuclear waste, nuclear weapon accidents, space vehicle reentries, or contamination from a radiological dispersal device. The Monitoring division also provides technicians to support specific Health and Safety Division activities including: The operation of the Hotline; FRMAC facility surveys; Assistance with Health and Safety at Check Points; and Assistance at population assembly areas which require support from the FRMAC. This volume covers deployment activities, initial FRMAC activities, development and implementation of the monitoring and assessment plan, the briefing of field teams, and the transfer of FRMAC to the EPA.« less

Radiological controls integrated into design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kindred, G.W.

1995-03-01

Radiological controls are required by law in the design of commercial nuclear power reactor facilities. These controls can be relatively minor or significant, relative to cost. To ensure that radiological controls are designed into a project, the health physicist (radiological engineer) must be involved from the beginning. This is especially true regarding keeping costs down. For every radiological engineer at a nuclear power plant there must be fifty engineers of other disciplines. The radiological engineer cannot be an expert on every discipline of engineering. However, he must be knowledgeable to the degree of how a design will impact the facilitymore » from a radiological perspective. This paper will address how to effectively perform radiological analyses with the goal of radiological controls integrated into the design package.« less

A Low-Cost Tele-Imaging Platform for Developing Countries

PubMed Central

Adambounou, Kokou; Adjenou, Victor; Salam, Alex P.; Farin, Fabien; N’Dakena, Koffi Gilbert; Gbeassor, Messanvi; Arbeille, Philippe

2014-01-01

Purpose: To design a “low-cost” tele-imaging method allowing real-time tele-ultrasound expertise, delayed tele-ultrasound diagnosis, and tele-radiology between remote peripherals hospitals and clinics (patient centers) and university hospital centers (expert center). Materials and methods: A system of communication via internet (IP camera and remote access software) enabling transfer of ultrasound videos and images between two centers allows a real-time tele-radiology expertise in the presence of a junior sonographer or radiologist at the patient center. In the absence of a sonographer or radiologist at the patient center, a 3D reconstruction program allows a delayed tele-ultrasound diagnosis with images acquired by a lay operator (e.g., midwife, nurse, technician). The system was tested both with high and low bandwidth. The system can further accommodate non-ultrasound tele-radiology (conventional radiography, mammography, and computer tomography for example). The system was tested on 50 patients between CHR Tsevie in Togo (40 km from Lomé-Togo and 4500 km from Tours-France) and CHU Campus at Lomé and CHU Trousseau in Tours. Results: A real-time tele-expertise was successfully performed with a delay of approximately 1.5 s with an internet bandwidth of around 1 Mbps (IP Camera) and 512 kbps (remote access software). A delayed tele-ultrasound diagnosis was also performed with satisfactory results. The transmission of radiological images from the patient center to the expert center was of adequate quality. Delayed tele-ultrasound and tele-radiology was possible even in the presence of a low-bandwidth internet connection. Conclusion: This tele-imaging method, requiring nothing by readily available and inexpensive technology and equipment, offers a major opportunity for telemedicine in developing countries. PMID:25250306

Internet treatment for generalized anxiety disorder: a randomized controlled trial comparing clinician vs. technician assistance.

PubMed

Robinson, Emma; Titov, Nickolai; Andrews, Gavin; McIntyre, Karen; Schwencke, Genevieve; Solley, Karen

2010-06-03

Internet-based cognitive behavioural therapy (iCBT) for generalized anxiety disorder (GAD) has been shown to be effective when guided by a clinician. The present study sought to replicate this finding, and determine whether support from a technician is as effective as guidance from a clinician. Randomized controlled non-inferiority trial comparing three groups: Clinician-assisted vs. technician-assisted vs. delayed treatment. Community-based volunteers applied to the VirtualClinic (www.virtualclinic.org.au) research program and 150 participants with GAD were randomized. Participants in the clinician- and technician-assisted groups received access to an iCBT program for GAD comprising six online lessons, weekly homework assignments, and weekly supportive contact over a treatment period of 10 weeks. Participants in the clinician-assisted group also received access to a moderated online discussion forum. The main outcome measures were the Penn State Worry Questionnaire (PSWQ) and the Generalized Anxiety Disorder-7 Item (GAD-7). Completion rates were high, and both treatment groups reduced scores on the PSWQ (p<0.001) and GAD-7 (p<0.001) compared to the delayed treatment group, but did not differ from each other. Within group effect sizes on the PSWQ were 1.16 and 1.07 for the clinician- and technician-assisted groups, respectively, and on the GAD-7 were 1.55 and 1.73, respectively. At 3 month follow-up participants in both treatment groups had sustained the gains made at post-treatment. Participants in the clinician-assisted group had made further gains on the PSWQ. Approximately 81 minutes of clinician time and 75 minutes of technician time were required per participant during the 10 week treatment program. Both clinician- and technician-assisted treatment resulted in large effect sizes and clinically significant improvements comparable to those associated with face-to-face treatment, while a delayed treatment/control group did not improve. These results provide support for large scale trials to determine the clinical effectiveness and acceptability of technician-assisted iCBT programs for GAD. This form of treatment has potential to increase the capacity of existing mental health services. Australian New Zealand Clinical Trials Registry ACTRN12609000563268.

Internet Treatment for Generalized Anxiety Disorder: A Randomized Controlled Trial Comparing Clinician vs. Technician Assistance

PubMed Central

Robinson, Emma; Titov, Nickolai; Andrews, Gavin; McIntyre, Karen; Schwencke, Genevieve; Solley, Karen

2010-01-01

Background Internet-based cognitive behavioural therapy (iCBT) for generalized anxiety disorder (GAD) has been shown to be effective when guided by a clinician. The present study sought to replicate this finding, and determine whether support from a technician is as effective as guidance from a clinician. Method Randomized controlled non-inferiority trial comparing three groups: Clinician-assisted vs. technician-assisted vs. delayed treatment. Community-based volunteers applied to the VirtualClinic (www.virtualclinic.org.au) research program and 150 participants with GAD were randomized. Participants in the clinician- and technician-assisted groups received access to an iCBT program for GAD comprising six online lessons, weekly homework assignments, and weekly supportive contact over a treatment period of 10 weeks. Participants in the clinician-assisted group also received access to a moderated online discussion forum. The main outcome measures were the Penn State Worry Questionnaire (PSWQ) and the Generalized Anxiety Disorder-7 Item (GAD-7). Completion rates were high, and both treatment groups reduced scores on the PSWQ (p<0.001) and GAD-7 (p<0.001) compared to the delayed treatment group, but did not differ from each other. Within group effect sizes on the PSWQ were 1.16 and 1.07 for the clinician- and technician-assisted groups, respectively, and on the GAD-7 were 1.55 and 1.73, respectively. At 3 month follow-up participants in both treatment groups had sustained the gains made at post-treatment. Participants in the clinician-assisted group had made further gains on the PSWQ. Approximately 81 minutes of clinician time and 75 minutes of technician time were required per participant during the 10 week treatment program. Conclusions Both clinician- and technician-assisted treatment resulted in large effect sizes and clinically significant improvements comparable to those associated with face-to-face treatment, while a delayed treatment/control group did not improve. These results provide support for large scale trials to determine the clinical effectiveness and acceptability of technician-assisted iCBT programs for GAD. This form of treatment has potential to increase the capacity of existing mental health services. Trial Registration Australian New Zealand Clinical Trials Registry ACTRN12609000563268 PMID:20532167

Technicians assembly the Hubble Space Telescope (HST) mockup at JSC

NASA Technical Reports Server (NTRS)

1989-01-01

At JSC's Mockup and Integration Laboratory (MAIL) Bldg 9A, technicians install a high gain antenna (HGA) on the Hubble Space Telescope (HST) mockup. On the ground a technician operates the controls for the overhead crane that is lifting the HGA into place on the Support System Module (SSM) forward shell. Others in a cherry picker basket wait for the HGA to near its final position so they can secure it on the mockup.

Department of Defense Manpower Requirements Report - FY 1990

DTIC Science & Technology

1989-02-01

14 00 N) I 4C4 00-4 -A)4 4 4 0 44~𔃺 0OO %0 440 *04 0 U) 0 &n NOOO tO o CIO 4 iO4Mc 0 w N\\’. 41 w v.a a A a at a- a a a 41 M 8i~ 8f- 4’’O UtI r- ’-44...with nurses, occupational health physicians, pharmacists , physical therapists, optometrists, radiological technicians, etc. The difficulty is the result...reduction in the introduction of new employees (fewer nursing school graduates) and an increasing demand, and such as pharmacists where there is a

Hubble Systems Optimize Hospital Schedules

NASA Technical Reports Server (NTRS)

2009-01-01

Don Rosenthal, a former Ames Research Center computer scientist who helped design the Hubble Space Telescope's scheduling software, co-founded Allocade Inc. of Menlo Park, California, in 2004. Allocade's OnCue software helps hospitals reclaim unused capacity and optimize constantly changing schedules for imaging procedures. After starting to use the software, one medical center soon reported noticeable improvements in efficiency, including a 12 percent increase in procedure volume, 35 percent reduction in staff overtime, and significant reductions in backlog and technician phone time. Allocade now offers versions for outpatient and inpatient magnetic resonance imaging (MRI), ultrasound, interventional radiology, nuclear medicine, Positron Emission Tomography (PET), radiography, radiography-fluoroscopy, and mammography.

Emergency Victim Care. A Training Manual for Emergency Medical Technicians. Module 6. Bleeding Control, Wounds and Bandaging, Shock. Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Vocational Education.

This student manual, the sixth in a set of 14 modules, is designed to train emergency medical technicians (EMTs) in Ohio. The module contains three sections covering the following course content: control of bleeding, caring for wounds and bandaging various body parts, and caring for shock victims. Each section contains objectives, an introduction,…

An Examination of the Effects of First-Term Career Progression on Navy A-School Attrition and the Military Experiences of A-School Students After Attrition

DTIC Science & Technology

1991-06-01

614S 6718 21.9 Technician Elec (GSE- 4YO ) Avionics Technician- 6240 21.8 Aviation Control Tech- 4YO (AQ- 4YO ) Boiler Technician PSI- 4YO 601G 6260 6486 21.3...BT- 4YO ) Electronics Technician 6723 6708 6711 21.3 Submarine (ET-SS) Strategic Weapons Systems 6371 6146 615S 615T 20.7 (SWS) Gas Turbine Systems...601G 614W 614T 6720 20.4 Technicien Mech (GSM- 4YO ) Machinist’s Mate Nuclear 611N 130E 191.8 Field (MMN) SOURCES: Chief of Naval Education and Training

An Internet-Based Radiology Course in Medical School: Comparison of Academic Performance of Students on Campus Versus Those With Absenteeism Due to Residency Interviews.

PubMed

Alexander, Andrew George; Deas, Deborah; Lyons, Paul Eric

2018-05-18

Imaging and its optimal use are imperative to the practice of medicine, yet many students don't receive a formal education in radiology. Concurrently, students look for ways to take time away from medical school for residency interviewing. Web-based instruction provides an opportunity to combine these imperatives using online modalities. A largely Web-based course in radiology during the 4th year of medical school was evaluated both for its acceptance to students who needed to be away from campus for interviews, and its effectiveness on a nationally administered standardized test. All students were placed into a structured program utilizing online videos, online modules, online textbook assignments, and live interactive online lectures. Over half of the course could be completed away from campus. The Alliance of Medical Student Educators in Radiology test exam bank was used as a final exam to evaluate medical knowledge. Positive student feedback included the freedom to travel for interviews, hands-on ultrasound training, interactive teaching sessions, and quality Web-based learning modules. Negative feedback included taking quizzes in-person, a perceived outdated online textbook, and physically shadowing hospital technicians. Most students elected to take the course during the interview months of October through January. The Alliance of Medical Student Educators in Radiology final exam results (70.5%) were not significantly different than the national cohort (70%) who took the course in-person. Test scores from students taking the course during interview travel months were not significantly different from students who took the course before (P=.30) or after (P=.34) the interview season. Students desire to learn radiology and often choose to do so when they need to be away from campus during the fall of their 4th year of study to accomplish their residency interviews. Web-based education in radiology allows students' interview traveling and radiology course objectives to be successfully met without adversely affecting the outcomes on a nationally normed examination in radiology. A curriculum that includes online content and live Web-based teleconference access to faculty can accomplish both imperatives. ©Andrew George Alexander, Deborah Deas, Paul Eric Lyons. Originally published in JMIR Medical Education (http://mededu.jmir.org), 18.05.2018.

Engineers and technicians in the control room at the Dryden Flight Research Center must constantly monitor critical operations and checks during research projects like NASA's hypersonic X-43A

NASA Image and Video Library

2004-01-24

Engineers and technicians in the control room at the Dryden Flight Research Center must constantly monitor critical operations and checks during research projects like NASA's hypersonic X-43A. Visible in the photo, taken two days before the X-43's captive carry flight in January 2004, are [foreground to background]; Tony Kawano (Range Safety Officer), Brad Neal (Mission Controller), and Griffin Corpening (Test Conductor).

Use of alpha spectroscopy for conducting rapid surveys of transuranic activity on air sample filters and smears.

PubMed

Hayes, Robert B; Peña, Adan M; Goff, Thomas E

2005-08-01

This paper demonstrates the utility of a portable alpha Continuous Air Monitor (CAM) as a bench top scalar counter for multiple sample types. These include using the CAM to count fixed air sample filters and radiological smears. In counting radiological smears, the CAM is used very much like a gas flow proportional counter (GFPC), albeit with a lower efficiency. Due to the typically low background in this configuration, the minimum detectable activity for a 5-min count should be in the range of about 10 dpm which is acceptably below the 20 dpm limit for transuranic isotopes. When counting fixed air sample filters, the CAM algorithm along with other measurable characteristics can be used to identify and quantify the presence of transuranic isotopes in the samples. When the radiological control technician wants to take some credit from naturally occurring radioactive material contributions due to radon progeny producing higher energy peaks (as in the case with a fixed air sample filter), then more elaborate techniques are required. The techniques presented here will generate a decision level of about 43 dpm for such applications. The calibration for this application should alternatively be done using the default values of channels 92-126 for region of interest 1. This can be done within 10 to 15 min resulting in a method to rapidly evaluate air filters for transuranic activity. When compared to the 1-h count technique described by , the technique presented in the present work demonstrates a technique whereby more than two thirds of samples can be rapidly shown (within 10 to 15 min) to be within regulatory compliant limits. In both cases, however, spectral quality checks are required to insure sample self attenuation is not a significant bias in the activity estimates. This will allow the same level of confidence when using these techniques for activity quantification as is presently available for air monitoring activity quantification using CAMs.

[Microbiology laboratory as a base of information sending].

PubMed

Komori, Toshiaki; Fujita, Naohisa; Hirose, Yuri; Kimura, Takeshi; Kyotani, Noriko; Kurahashi, Satoko; Yamada, Yukiji; Ushiyama, Masaji; Yasumoto, Towa; Yuasa, Soh-ichi

2007-10-01

The goal of our microbiology laboratory is to provide an accurate microbiological result and a useful information for every healthcare workers (HCWs). For this purpose, we were trying to do several activities, such as improving the work-flow of microbiology testings, starting 365-day-open microbiology tests, providing some training courses of microbiology and sending many useful informations about infectious diseases and infection control. Before these activities, we needed another 5 microbiology technicians beside 3 technicians and had started the program to educate them. We have successfully finished it and enabled all plans begin in April, 2005. Since then we are open for 365 days and also sending HCWs many newsletters for performing effective microbiological testings via the intra-network system and having lectures for both doctors and nurses, especially for new resident doctors at the orientation. We had also the training course for certified infection control nurses and accepted two technicians from Africa, who came to study a basic microbiology via JICA. These activities have enabled every technician not only to report and analyze microbiological test result effectively but also to improve writing and presentation skills. Through these activities all technicians have realized that accurate and rapid information from a microbiology laboratory is a key to treat patients with infectious diseases and improve their prognosis. It is suggested that skill-up of technicians lead to report an accurate result in microbiology and at the same time improve the attitude for their job.

Large Outbreak of Hepatitis C Virus Associated With Drug Diversion by a Healthcare Technician.

PubMed

Alroy-Preis, Sharon; Daly, Elizabeth R; Adamski, Christine; Dionne-Odom, Jodie; Talbot, Elizabeth A; Gao, Fengxiang; Cavallo, Steffany J; Hansen, Katrina; Mahoney, Jennifer C; Metcalf, Erin; Loring, Carol; Bean, Christine; Drobeniuc, Jan; Xia, Guo-Liang; Kamili, Saleem; Montero, José T

2018-05-14

In May 2012, the New Hampshire (NH) Division of Public Health Services (DPHS) was notified of 4 persons with newly diagnosed hepatitis C virus (HCV) infection at hospital X. Initial investigation suggested a common link to the hospital cardiac catheterization laboratory (CCL) because the infected persons included 3 CCL patients and a CCL technician. NH DPHS initiated an investigation to determine the source and control the outbreak. NH DPHS conducted site visits, case patient and employee interviews, medical record and medication use review, and employee and patient HCV testing using enzyme immunoassay for anti-HCV, reverse-transcription polymerase chain reaction for HCV RNA, nonstructural 5B (NS5B) and hypervariable region 1 (HVR1) sequencing, and quasispecies analysis. HCV HVR1 analysis of the first 4 cases confirmed a common source of infection. HCV testing identified 32 of 1074 CCL patients infected with the outbreak strain, including 3 patients coinfected with >1 HCV strain. The epidemiologic investigation revealed evidence of drug diversion by the HCV-infected technician, evidenced by gaps in controlled medication control, higher fentanyl use during procedures for confirmed cases, and building card key access records documenting the presence of the technician during days when transmission occurred. The employee's status as a traveling technician led to a multistate investigation, which identified additional cases at prior employment sites. This is the largest laboratory-confirmed drug diversion-associated HCV outbreak published to date. Recommendations to reduce drug diversion risk and to conduct outbreak investigations are provided.

Education of Technicians for Water Conservation and Wastewater Control.

ERIC Educational Resources Information Center

Brooking, Walter J.

There is a growing need for supportive personnel with technical preparation in water and wastewater purification and water resource conservation. A curriculum and program guide was developed in 1965-66 by Fayetteville Technical Institute for use by institutions interested in establishing a program to educate technicians. Meeting the need for…

47 CFR 97.119 - Station identification.

Code of Federal Regulations, 2010 CFR

2010-10-01

... on the common data base coordinated, maintained and disseminated by the special event call sign data... part of the communications are transmitted by a RTTY or data emission; (4) By an image emission... from Novice, Technician, or Technician Plus Class to General Class: AG; (3) For a control operator who...

Emergency Victim Care. A Training Manual for Emergency Medical Technicians. Module 2. Equipment, Safe Driving Practices, Legal Aspects, Controlling the Situation, Action Evaluation Conference. Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Vocational Education.

This student manual, the second in a set of 14 modules, is designed to train emergency medical technicians (EMTs) in Ohio. The module contains five sections that cover the following course content: ambulance equipment, safe driving practices for emergency vehicle drivers, legal aspects of the EMT's job, how to maintain control at an accident scene…

Automated Diagnosis Of Conditions In A Plant-Growth Chamber

NASA Technical Reports Server (NTRS)

Clinger, Barry R.; Damiano, Alfred L.

1995-01-01

Biomass Production Chamber Operations Assistant software and hardware constitute expert system that diagnoses mechanical failures in controlled-environment hydroponic plant-growth chamber and recommends corrective actions to be taken by technicians. Subjects of continuing research directed toward development of highly automated closed life-support systems aboard spacecraft to process animal (including human) and plant wastes into food and oxygen. Uses Microsoft Windows interface to give technicians intuitive, efficient access to critical data. In diagnostic mode, system prompts technician for information. When expert system has enough information, it generates recovery plan.

Radiation Protection in Canada

PubMed Central

Brown, John R.; Jarvis, Anita A.

1964-01-01

A recent survey was carried out with respect to radiobiological and radiological health projects in Canada. Letters of inquiry, followed by two questionnaires, were sent out to every institution where radiation research was likely to have been undertaken. Approximately 75% of those contacted replied. Of the total of 200 studies, 84% were classified as biological and medical studies, the remaining 16% as environmental radiation studies. Responses to the inquiry stressed the inadequacy of the present governmental budget for radiation research, the need for higher salaries for research workers, and the necessity of a more intensive teaching program for technicians and professional personnel. The granting of longer-term grants, rather than annually renewable grants, is urged. PMID:14226104

Effects of occupational exposure of X-Ray on hematological parameters of diagnostic technicians

NASA Astrophysics Data System (ADS)

Taqi, Ali H.; Faraj, Kharman A.; Zaynal, Sarah A.; Hameed, Ahmed M.; Mahmood, Abd-Alkader A.

2018-06-01

The aim of this study was to identify the effects of long term exposure of X-ray on diagnostic technicians which they work at Kirkuk hospitals through examining some hematological parameters which are white blood cells (WBC), Neutrophils, Lymphocyte, Monocyte, Eosinophil, Basophil, Reactive Lymphocyte, red blood cells (RBC), hemoglobin (Hb), hematocrit (HCT), Mean Cell Volume (MCV), Mean Corpuscular Hemoglobin (MCH), Mean Cell Hemoglobin Concentration (MCHC), Red Cell Distribution Width (RDW), Platelet (PLT). The study included 54 male diagnostic technicians and 54 male healthy controls match with the first group to show any alteration of the hematological parameters. The diagnostic technicians divided into two groups depending on their work experience and hours working per day. The statistical analysis was performed using (Graph-pad) program. Our results showed that the Complete blood cells count (CBC) parameters (Neutrophil, Monocytes, Basophile, MCV, RDW and PLT) significantly (P<.05) decreased while the parameters (Lymphocytes, RBC, Hb and HCT) significantly (P<.05) increased and strong significantly (P<.0001) increasing was recorded for the parameter Reactive lymphocytes mostly in all groups of the diagnostic technicians compared with their controls. We concluded that chronic exposure of X-ray can significantly alter some hematological parameters and the number of hours working per day has observable effects on the some hematological parameters. We recommended training and courses about hazard of ionizing radiation should be organized for enhance the healthcare quality of the technicians and to improve their knowledge about benefit of radiation protection tools to protect themselves from any overexposure during the daily life.

Development of a Pharmacy Technician-Driven Program to Improve Vaccination Rates at an Academic Medical Center.

PubMed

Hill, John D; Anderegg, Sammuel V; Couldry, Rick J

2017-10-01

Background: Influenza and pneumococcal disease contribute substantially to the burden of preventable disease in the United States. Despite quality measures tied to immunization rates, health systems have struggled to achieve these targets in the inpatient setting. Pharmacy departments have had success through implementation of pharmacist standing order programs (SOP); however, these initiatives are labor-intensive and have not resulted in 100% immunization rates. Objective: The objective of this study was to evaluate a pilot utilizing pharmacy technician interventions, in combination with a nursing SOP, to improve vaccination rates of hospitalized patients for influenza and pneumococcal disease. Methods: A process was developed for pharmacy technicians to identify patients who were not previously screened or immunized during the weekend days on the Cardiovascular Progressive Care unit at the University of Kansas Health-System. Targeted pharmacy technician interventions consisted of phone call reminders and face-to-face discussions with nursing staff. The primary study outcome was the change in immunization compliance rates between the control and intervention groups. Results: Influenza vaccine rates showed a statistically significant increase from 72.2% (52 of 72) of patients during the control group to 92.9% (65 of 70, P = .001) of patients during the intervention group. A pneumococcal vaccination rate of 81.3% (61 of 75) was observed in the control group, compared with 84.3% (59 of 70) of patients in the intervention group ( P = .638). Conclusion: An improvement in inpatient influenza immunization rates can be achieved through targeted follow-up performed by pharmacy technicians, in combination with a nursing-driven SOP.

Advancing technician practice: Deliberations of a regulatory board.

PubMed

Adams, Alex J

2018-01-01

In 2016, the Idaho State Board of Pharmacy (U.S.) undertook a major rulemaking initiative to advance pharmacy practice by broadening the ability of pharmacists to delegate tasks to pharmacy technicians. The new rules of the Board thus moved the locus of control in technician scope of practice from law to pharmacist delegation. Pharmacist delegation is individualistic and takes into account the individual technician's capabilities, the pharmacist's comfort level, facility policies, and the risk mitigation strategies present at the facility, among other factors. State law limits, by contrast, are rigid and can mean that pharmacists are unable to delegate tasks that are or could otherwise be within the abilities of their technicians. The expanded technician duties are in two domains: 1) medication dispensing support (e.g., tech-check-tech, accepting verbal prescriptions, transferring prescriptions, and performing remote data entry); and 2) technical support for pharmacist clinical services (e.g., administering immunizations). This commentary reviews the evidence behind these expanded duties, as well as the key regulatory decision points for each task. The Board's rules and approach may prove useful to other states and even other governing bodies outside the U.S. as they consider similar issues. Copyright © 2017 Elsevier Inc. All rights reserved.

Outbreak of hepatitis C virus infection associated with narcotics diversion by an hepatitis C virus-infected surgical technician.

PubMed

Warner, Amy E; Schaefer, Melissa K; Patel, Priti R; Drobeniuc, Jan; Xia, Guoliang; Lin, Yulin; Khudyakov, Yury; Vonderwahl, Candace W; Miller, Lisa; Thompson, Nicola D

2015-01-01

Drug diversion by health care personnel poses a risk for serious patient harm. Public health identified 2 patients diagnosed with acute hepatitis C virus (HCV) infection who shared a common link with a hospital. Further investigation implicated a drug-diverting, HCV-infected surgical technician who was subsequently employed at an ambulatory surgical center. Patients at the 2 facilities were offered testing for HCV infection if they were potentially exposed. Serum from the surgical technician and patients testing positive for HCV but without evidence of infection before their surgical procedure was further tested to determine HCV genotype and quasi-species sequences. Parenteral medication handling practices at the 2 facilities were evaluated. The 2 facilities notified 5970 patients of their possible exposure to HCV, 88% of whom were tested and had results reported to the state public health departments. Eighteen patients had HCV highly related to the surgical technician's virus. The surgical technician gained unauthorized access to fentanyl owing to limitations in procedures for securing controlled substances. Public health surveillance identified an outbreak of HCV infection due to an infected health care provider engaged in diversion of injectable narcotics. The investigation highlights the value of public health surveillance in identifying HCV outbreaks and uncovering a method of drug diversion and its impacts on patients. Copyright © 2015 Association for Professionals in Infection Control and Epidemiology, Inc. All rights reserved.

Field of dreamers and dreamed-up fields: functional and fake perimetry.

PubMed

Thompson, J C; Kosmorsky, G S; Ellis, B D

1996-01-01

Hysterical and malingering patients can manifest visual field defects on perimetry (visual field testing), including defects suggestive of true visual pathway pathology. It has been shown that control subjects can easily imitate some pathologic defects with automated, computed perimetry. The authors sought to determine whether subjects could imitate the same pathologic defect with manual and automated perimetry. Six subjects posed as patients with neurologic problems. They had manual perimetry with both an experienced and inexperienced technician followed by automated perimetry. They were later interviewed about the methods of the technicians and the difficulty of the exercise. Four of six subjects easily imitated the assigned defects with both technicians on manual perimetry and with automated perimetry. These included quadrantic, altitudinal, hemianopic, and enlarged blind-spot defects. Two subjects who were assigned cecocentral and paracentral scotomas instead produced enlarged blind spots by manual perimetry and defects suggestive of chiasmal pathology by automated perimetry. Paradoxically, some subjects found that experienced technicians were easier to fool than inexperienced technicians because of the systematic way in which experienced technicians defined defects. With minimal coaching, some subjects can imitate visual fields with enlarged blind spots, quadrantic, hemianopic, and altitudinal defects with ease and reproducibility by both automated and manual perimetry. Cecocentral and paracentral scotomas are harder to imitate but may be mistaken as representing chiasmal pathology. Paradoxically, experienced technicians may not be better at detecting hysterical or malingering individuals.

Compact Microscope Imaging System with Intelligent Controls

NASA Technical Reports Server (NTRS)

McDowell, Mark

2004-01-01

The figure presents selected views of a compact microscope imaging system (CMIS) that includes a miniature video microscope, a Cartesian robot (a computer- controlled three-dimensional translation stage), and machine-vision and control subsystems. The CMIS was built from commercial off-the-shelf instrumentation, computer hardware and software, and custom machine-vision software. The machine-vision and control subsystems include adaptive neural networks that afford a measure of artificial intelligence. The CMIS can perform several automated tasks with accuracy and repeatability . tasks that, heretofore, have required the full attention of human technicians using relatively bulky conventional microscopes. In addition, the automation and control capabilities of the system inherently include a capability for remote control. Unlike human technicians, the CMIS is not at risk of becoming fatigued or distracted: theoretically, it can perform continuously at the level of the best human technicians. In its capabilities for remote control and for relieving human technicians of tedious routine tasks, the CMIS is expected to be especially useful in biomedical research, materials science, inspection of parts on industrial production lines, and space science. The CMIS can automatically focus on and scan a microscope sample, find areas of interest, record the resulting images, and analyze images from multiple samples simultaneously. Automatic focusing is an iterative process: The translation stage is used to move the microscope along its optical axis in a succession of coarse, medium, and fine steps. A fast Fourier transform (FFT) of the image is computed at each step, and the FFT is analyzed for its spatial-frequency content. The microscope position that results in the greatest dispersal of FFT content toward high spatial frequencies (indicating that the image shows the greatest amount of detail) is deemed to be the focal position.

Learner-Centered Instruction (LCI). Volume 3. Plan of Instruction.

ERIC Educational Resources Information Center

Pieper, William J.; And Others

A plan of instruction (POI) is presented for an experimental course to train flight line weapon control systems technicians for the F-111A. The POI is based on the job behavioral description of this technician's job prepared earlier. The two basic decisions establishing the character of the POI are the overall objective of producing graduates…

Task Analysis and Descriptions of Required Job Competencies of Robotics/Automated Systems Technicians. Outlines for New Courses and Modules.

ERIC Educational Resources Information Center

Hull, Daniel M.; Lovett, James E.

The six new robotics and automated systems specialty courses developed by the Robotics/Automated Systems Technician (RAST) project are described in this publication. Course titles are Fundamentals of Robotics and Automated Systems, Automated Systems and Support Components, Controllers for Robots and Automated Systems, Robotics and Automated…

Learner's Guide: Water Quality Monitoring. An Instructional Guide for the Two-Year Water Quality Monitoring Curriculum.

ERIC Educational Resources Information Center

Glazer, Richard B.; And Others

This learner's guide is designed to meet the training needs for technicians involved in monitoring activities related to the Federal Water Pollution Act and the Safe Drinking Water Act. In addition it will assist technicians in learning how to perform process control laboratory procedures for drinking water and wastewater treatment plant…

[Controlling instruments in radiology].

PubMed

Maurer, M

2013-10-01

Due to the rising costs and competitive pressures radiological clinics and practices are now facing, controlling instruments are gaining importance in the optimization of structures and processes of the various diagnostic examinations and interventional procedures. It will be shown how the use of selected controlling instruments can secure and improve the performance of radiological facilities. A definition of the concept of controlling will be provided. It will be shown which controlling instruments can be applied in radiological departments and practices. As an example, two of the controlling instruments, material cost analysis and benchmarking, will be illustrated.

2010 Mississippi Curriculum Framework: Postsecondary Emergency Medical Technician. (Program CIP: 51.0904 - Emergency Medical Technology/Technician)

ERIC Educational Resources Information Center

Briscoe, Lisa; Bryant, Katrina; Galtelli, Mark; Glasson, Kristi; Hall, David; Hood, Brenda; Mahaffey, Libby; McBryde, John; Read, John; Shirley, Gary; Wright, Al

2010-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

DOE Partnerships with States, Tribes and Other Federal Programs Help Responders Prepare for Challenges Involving Transport of Radioactive Materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marsha Keister

2001-02-01

DOE Partnerships with States, Tribes and Other Federal Programs Help Responders Prepare for Challenges Involving Transport of Radioactive Materials Implementing adequate institutional programs and validating preparedness for emergency response to radiological transportation incidents along or near U.S. Department of Energy (DOE) shipping corridors poses unique challenges to transportation operations management. Delayed or insufficient attention to State and Tribal preparedness needs may significantly impact the transportation operations schedule and budget. The DOE Transportation Emergency Preparedness Program (TEPP) has successfully used a cooperative planning process to develop strong partnerships with States, Tribes, Federal agencies and other national programs to support responder preparednessmore » across the United States. DOE TEPP has found that building solid partnerships with key emergency response agencies ensures responders have access to the planning, training, technical expertise and assistance necessary to safely, efficiently and effectively respond to a radiological transportation accident. Through the efforts of TEPP over the past fifteen years, partnerships have resulted in States and Tribal Nations either using significant portions of the TEPP planning resources in their programs and/or adopting the Modular Emergency Response Radiological Transportation Training (MERRTT) program into their hazardous material training curriculums to prepare their fire departments, law enforcement, hazardous materials response teams, emergency management officials, public information officers and emergency medical technicians for responding to transportation incidents involving radioactive materials. In addition, through strong partnerships with Federal Agencies and other national programs TEPP provided technical expertise to support a variety of radiological response initiatives and assisted several programs with integration of the nationally recognized MERRTT program into other training venues, thus ensuring consistency of radiological response curriculums delivered to responders. This presentation will provide an overview of the steps to achieve coordination, to avoid redundancy, and to highlight several of the successful partnerships TEPP has formed with States, Tribes, Federal agencies and other national programs. Events, accident scenarios, and training where TEPP was proven to be integral in building the radiological response capabilities for first responders to actual radiological incidents are also highlighted. Participants will gain an appreciation for the collaborative efforts States and Tribes are engaging in with the DOE to ensure that responders all along the DOE transportation corridors are adequately prepared to respond to shipments of radioactive materials through their communities.« less

Child Passenger Safety Technician Consultation in the Pediatric Primary Care Setting.

PubMed

Burstein, Dina; Zonfrillo, Mark R; Baird, Janette; Mello, Michael J

2017-09-01

Correct use of a child safety seat (CSS) can reduce the risk of fatal motor vehicle crash-related injury by up to 71%; however, misuse rates for CSS are as high as 70%. We recruited 189 caregivers at 2 large suburban pediatric office practices; 94 in the intervention group and 95 in the control group. All participants completed a baseline survey and received a CSS safety brochure. Intervention participants had their CSS installation checked at enrollment by a certified child passenger safety (CPS) technician. Follow-up was conducted 4 months post enrollment. Intervention group participants had a 21.3% reduction in critical misuse at follow-up, whereas control participants critical misuse rate at follow-up was identical to the intervention group at baseline. A consult with a certified CPS technician, at the time of a routine visit to the pediatrician, resulted in a reduction in CSS misuse rates.

DOC/WSNSO (Department of Commerce/Weather Service Nuclear Support Office) operational support to Federal Radiological Monitoring and Assessment Center

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mueller, P.

1989-01-01

The National Weather Service (NWS) is an agency of the Department of Commerce. The NWS has hundreds of weather offices throughout the United States. The Weather Service Nuclear Support Office (WSNSO) is a highly specialized unit of NWS that provides direct support to the U.S. Department of Energy's (DOE's) underground nuclear testing program. The WSNSO has been associated with the DOE for >33 yr. As a result of the unique relationship with the DOE, all WSNSO emergency response meteorologists and meteorological technicians are allowed access to classified material. Meteorological phenomena play a significant role during a Federal Radiological Monitoring andmore » Assessment Center (FRMAC) event, and WSNSO meteorologists provide direct support to ARAC. The marriage of state-of-the-art computer systems together with proven technology provides the on-scene WSNSO meteorologist with essentially a portable fully equipped, fully functional, advanced NWS weather station. The WSNSO's emergency response personnel and hardware are at the ready and can be mobilized within 2 h. WSNSO can provide on-scene weather forecasts and critical weather data collection whenever and wherever necessary.« less

Expert Computer Systems for Missile Maintenance.

DTIC Science & Technology

1983-08-09

ADDRESS(II different from Controlling Office) IS. SECURITY CLASS. (of thl report) Unclassified 1Sa. DECL ASSI FICATION/ DOWNGRADING - SCHEDULE I...circuit, and with the diagnostic methods used by the technicians responsible for maintain- ing it, we decided that we should visit Owego. On October 20...This trip was useful in several respects: 1. Insight was gained into the methods used by the technicians to diagnose a faulty circuit. 2. We learned what

The Extent of Restrictions on the Service of Active-Component Military Women

DTIC Science & Technology

2012-01-01

from www.rand.org as a public service of the RAND Corporation. CHILDREN AND FAMILIES EDUCATION AND THE ARTS ENERGY AND ENVIRONMENT HEALTH AND...EN engineman, GM gunner’s mate, IT information systems, ET electronics technician, FC fire control, LS logistics spe- cialist, and CS culinary ...sonar technician rating. Women in non–submarine- specific ratings, such as YN yeoman, CS culinary specialist, and LS logistics specialist, are

[Task sharing with radiotherapy technicians in image-guided radiotherapy].

PubMed

Diaz, O; Lorchel, F; Revault, C; Mornex, F

2013-10-01

The development of accelerators with on-board imaging systems now allows better target volumes reset at the time of irradiation (image-guided radiotherapy [IGRT]). However, these technological advances in the control of repositioning led to a multiplication of tasks for each actor in radiotherapy and increase the time available for the treatment, whether for radiotherapy technicians or radiation oncologists. As there is currently no explicit regulatory framework governing the use of IGRT, some institutional experiments show that a transfer is possible between radiation oncologists and radiotherapy technicians for on-line verification of image positioning. Initial training for every technical and drafting procedures within institutions will improve audit quality by reducing interindividual variability. Copyright © 2013. Published by Elsevier SAS.

Formation of an environmental restoration user group for radiological controls

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morris, R.L.

1993-12-31

An Environmental Restoration User Group for Radiological Controls will be proposed. Article 116 of the Radiological Control Manual encourages contractors to establish informal working associations that promote dialogue among similar facilities. Chem-Nuclear Geotech, Inc., is willing to initially organize and lead a users group to work on common problems, define standard methods, publish a Radiological Work Practices Handbook, and recommend regulatory changes to make environmental restoration programs more cost effective without compromising radiological control. A charter for the users group will be proposed. A questionnaire will be distributed to interested persons to assist in development of focus groups and agendamore » items for the first meeting. The first meeting is planned for May 25-26, 1993, in Grand Junction Colorado. All interested persons are welcome to attend.« less

Skylab

NASA Image and Video Library

1970-01-01

This photograph shows technicians installing the meteoroid shield on the Thruster Attitude Control Subsystem (TACS). At one end of the Orbital Workshop (OWS), the TACS provided short-term control of the attitude of the Skylab.

Assessment of Occupational Symptoms and Chemical Exposures for Nail Salon Technicians in Daegu City, Korea

PubMed Central

Park, Sung-Ae; Gwak, Sugyeong

2014-01-01

Objectives This study aimed to evaluate occupational symptoms and chemical exposures of nail salon technicians. Methods Work-related symptoms of nail salon technicians in Daegu City were surveyed using a researcher-administered questionnaire, and responses were compared to those of non-exposed office workers as controls. Personal exposure level of airborne volatile organic compounds was also monitored using passive samplers. Results A total of 159 subjects in 120 salons were interviewed. Average work-shift concentrations of 13 chemicals were measured for 50 workers from 30 salons using personal passive samplers. The most frequently reported respiratory or neurologic symptoms by nail shop technicians compared to controls were nose irritation (odds ratio [OR], 54.0; confidence interval [CI], 21.6 to 134.8), followed by headache (OR, 9.3; CI, 4.7 to 18), and throat irritation (OR, 4.3; CI, 2.2 to 8.5). For eyes and skin, 92% of respondents complained eye irritation (OR, 13.1; CI, 5.7 to 30.1). In musculoskeletal symptoms, workers reported pain or discomfort in shoulders (OR, 20.3; CI, 7.7 to 54) and neck (OR, 19.7; CI, 8.9 to 43.6). From personal measurements, the proportion of exceeding the Korean Occupational Exposure Limit was the highest for acetone with 64%, followed by toluene (50%), butyl acetate (46%), and methyl methacrylate (12%). However, the service was being provided without a proper ventilation system in most surveyed shops. Conclusions Based on these findings, it is warranted to have appropriate local exhaust ventilation place to ensure adequate health protection of nail shop technicians as well as customers. At the same time, greater policy interests are warranted in nail care business to protect health of both workers and customers. PMID:24921020

Pharmacy technician involvement in community pharmacy medication therapy management.

PubMed

Lengel, Matthew; Kuhn, Catherine H; Worley, Marcia; Wehr, Allison M; McAuley, James W

To assess the impact of technician involvement on the completion of medication therapy management (MTM) services in a community pharmacy setting and to describe pharmacists' and technicians' perceptions of technician involvement in MTM-related tasks and their satisfaction with the technician's role in MTM. Prospective observational study. In the fall of 2015, pharmacists and selected technicians from 32 grocery store-based community pharmacies were trained to use technicians within MTM services. Completed MTM claims were evaluated at all pharmacies for 3 months before training and 3 months after training. An electronic survey, developed with the use of competencies taught in the training and relevant published literature, was distributed via e-mail to trained employees 3 months after training. The total number of completed MTM claims at the 32 pharmacy sites was higher during the posttraining time period (2687 claims) versus the pretraining period (1735 claims). Of the 182 trained participants, 112 (61.5%) completed the survey. Overall, perceived technician involvement was lower than expected. However, identifying MTM opportunities was the most commonly reported technician MTM task, with 62.5% of technicians and 47.2% of pharmacists reporting technician involvement. Nearly one-half of technicians (42.5%) and pharmacists (44.0%) agreed or strongly agreed they were satisfied with the technician's role in MTM services, and 40.0% of technicians agreed that they were more satisfied with their work in the pharmacy after involvement in MTM. Three months after initial training of technicians in MTM, participation of technicians was lower than expected. However, the technicians involved most often reported identifying MTM opportunities for pharmacists, which may be a focus for future technician trainings. In addition, technician involvement in MTM services may increase satisfaction with many aspects of work for actively involved technicians. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Performance evaluation of traffic sensing and control devices.

DOT National Transportation Integrated Search

2011-01-01

High quality vehicle detection is essential to properly operate actuated phases at traffic signals and to facilitate effective : management of technician and engineering resources. INDOT operates over 2600 traffic signal controllers, approximately 20...

Individual Radiation Protection Monitoring in the Marshall Islands: Rongelap Atoll (2002-2004)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamilton, T F; Kehl, S; Hickman, D

2006-01-17

The United States Department of Energy (U.S. DOE) has recently implemented a series of strategic initiatives to address long-term radiological surveillance needs at former U.S. nuclear test sites in the Marshall Islands. The plan is to engage local atoll communities in developing shared responsibilities for implementing radiation protection monitoring programs for resettled and resettling populations in the northern Marshall Islands. Using the pooled resources of the U.S. DOE and local atoll governments, individual radiological surveillance programs have been developed in whole body counting and plutonium urinalysis in order to accurately assess radiation doses resulting from the ingestion and uptake ofmore » fallout radionuclides contained in locally grown foods. Permanent whole body counting facilities have been established at three separate locations in the Marshall Islands including Rongelap Atoll (Figure 1). These facilities are operated and maintained by Marshallese technicians with scientists from the Lawrence Livermore National Laboratory (LLNL) providing on-going technical support services. Bioassay samples are collected under controlled conditions and analyzed for plutonium isotopes at the Center for Accelerator Mass Spectrometry at LLNL using state-of-the art measurement technologies. We also conduct an on-going environmental monitoring and characterization program at selected sites in the northern Marshall Islands. The aim of the environmental program is to determine the level and distribution of important fallout radionuclides in soil, water and local foods with a view towards providing more accurate and updated dose assessments, incorporating knowledge of the unique behaviors and exposure pathways of fallout radionuclides in coral atoll ecosystems. These scientific studies have also been essential in helping guide the development of remedial options used in support of island resettlement. Together, the individual and environmental radiological surveillance programs are helping meet the informational needs of the U.S. DOE and the Republic of the Marshall Islands. Our updated environmental assessments provide a strong scientific basis for predicting future change in exposure conditions especially in relation to changes in lifestyle, diet and/or land-use patterns. This information has important implications in addressing questions about existing (and future) radiological conditions on the islands, in determining as well as the implementation, cost and effectiveness of potential intervention options, and in general policy support considerations. Perhaps most importantly, the recently established individual radiological surveillance programs provide affected atoll communities with an unprecedented level of radiation protection monitoring where, for the first time, local resources are being made available to monitor resettled and resettling populations on a continuous basis. As a hard copy supplement to Marshall Islands Program website (http://eed.llnl.gov/mi/), this document provides an overview of the individual radiation protection monitoring program established for resettlement workers living on Rongelap Island along with a full disclosure of all verified measurement data (2002-2004). Readers are advised that an additional feature of the associated web site is a provision where users are able calculate and track doses delivered to volunteers (de-identified information only) participating the Marshall Islands Radiological Surveillance Program.« less

Individual Radiation Protection Monitoring in the Marshall Islands: Enewetak Atoll (2002-2004)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamilton, T F; Kehl, S; Hickman, D

2006-01-17

The United States Department of Energy (U.S. DOE) has recently implemented a series of strategic initiatives to address long-term radiological surveillance needs at former U.S. nuclear test sites in the Marshall Islands. The plan is to engage local atoll communities in developing shared responsibilities for implementing radiation protection monitoring programs for resettled and resettling populations in the northern Marshall Islands. Using the pooled resources of the U.S. DOE and local atoll governments, individual radiological surveillance programs have been developed in whole body counting and plutonium urinalysis in order to accurately assess radiation doses resulting from the ingestion and uptake ofmore » fallout radionuclides contained in locally grown foods. Permanent whole body counting facilities have been established at three separate locations in the Marshall Islands including Enewetak Island (Figure 1) (Bell et al., 2002). These facilities are operated and maintained by Marshallese technicians with scientists from the Lawrence Livermore National Laboratory (LLNL) providing on-going technical support services. Bioassay samples are collected under controlled conditions and analyzed for plutonium isotopes at the Center for Accelerator Mass Spectrometry at LLNL using state-of-the art measurement technologies. We also conduct an on-going environmental monitoring and characterization program at selected sites in the northern Marshall Islands. The aim of the environmental program is to determine the level and distribution of important fallout radionuclides in soil, water and local foods with a view towards providing more accurate and updated dose assessments, incorporating knowledge of the unique behaviors and exposure pathways of fallout radionuclides in coral atoll ecosystems. These scientific studies have also been essential in helping guide the development of remedial options used in support of island resettlement. Together, the individual and environmental radiological surveillance programs are helping meet the informational needs of the U.S. DOE and the Republic of the Marshall Islands. Our updated environmental assessments provide a strong scientific basis for predicting future change in exposure conditions especially in relation to changes in lifestyle, diet and/or land-use patterns. This information has important implications in addressing questions about existing (and future) radiological conditions on the islands, in determining the cost and estimating the effectiveness of potential remedial measures, and in general policy support considerations. Perhaps most importantly, the recently established individual radiological surveillance programs provide affected atoll communities with an unprecedented level of radiation protection monitoring where, for the first time, local resources are being made available to monitor resettled and resettling populations on a continuous basis. As a hard copy supplement to Marshall Islands Program website (http://eed.llnl.gov/mi/), this document provides an overview of the individual radiation protection monitoring program established for the Enewetak Atoll population group along with a full disclosure of all verified measurement data (2002-2004). Readers are advised that an additional feature of the associated web site is a provision where users are able calculate and track doses delivered to volunteers (de-identified information only) participating in the Marshall Islands Radiological Surveillance Program.« less

Estimation of annual occupational effective doses from external ionizing radiation at medical institutions in Kenya

NASA Astrophysics Data System (ADS)

Korir, Geoffrey; Wambani, Jeska; Korir, Ian

2011-04-01

This study details the distribution and trends of doses due to occupational radiation exposure among radiation workers from participating medical institutions in Kenya, where monthly dose measurements were collected for a period of one year ranging from January to December in 2007. A total of 367 medical radiation workers were monitored using thermoluminescent dosemeters. They included radiologists (27%), oncologists (2%), dentists (4%), Physicists (5%), technologists (45%), nurses (4%), film processor technicians (3%), auxiliary staff (4%), and radiology office staff (5%). The average annual effective dose of all categories of staff was found to range from 1.19 to 2.52 mSv. This study formed the initiation stage of wider, comprehensive and more frequent monitoring of occupational radiation exposures and long-term investigations into its accumulation patterns in our country.

Colonic transit in soccer players.

PubMed

Sesboüé, B; Arhan, P; Devroede, G; Lecointe-Besançon, I; Congard, P; Bouchoucha, M; Fabre, J

1995-04-01

To evaluate the effects of exercise on colonic function, we measured total and segmental transit times in 11 male soccer players and nine male radiology student technicians. Diet was kept constant in all subjects, who maintained their normal activities. For the soccer players, normal activities included 15 h of training and one match each week. Transit times were measured with radioopaque markers, using the multiple-ingestion, single-radiograph technique. No overall difference in large bowel transit was observed between the two groups. Right colon transit was considerably slower in the soccer players, whereas left colon and rectal transit were slightly accelerated. We conclude that an intensive sport activity only modifies regional differences in large bowel function. This may be of importance in extreme conditions, such as those experienced by marathon runners. Data should be obtained before prescribing exercise to treat constipation.

Assessment of Non-Invasive Methods of Measuring Bone Repair in Naval Casualty Victims.

DTIC Science & Technology

1980-02-01

the pin-hole colurnator on a high resolution gamma camera. In addition, the pilot project was necessary to train new technicians who had been hired...after the loss of trained technicians in 1976. Finally, the project was under- taken to help define any problems with regards to radiation contamination...allograft was entirely normal and equivalent to its autogenous control except that its histologic rating was a Type II repair rather than a Type I. In

Technicians complete assembly of Hubble Space Telescope (HST) mockup at JSC

NASA Technical Reports Server (NTRS)

1989-01-01

A technician listens to instructions as he operates the controls for the overhead crane that is lifting one of the Hubble Space Telescope (HST) high gain antennas (HGAs) into place on the HST Support System Module (SSM) forward shell. Others in a cherry picker basket wait to install the HGA on the SSM mockup. The HST mockup will be used for astronaut training and is being assembled in JSC's Mockup and Integration Laboratory (MAIL) Bldg 9A.

Uneasiness among laboratory technicians.

PubMed

Arluke, A

1999-01-01

Four aspects of animal experimentation cause uneasiness among many animal laboratory technicians. First, if technicians form strong attachments to lab animals, they feel conflict between their nurturing and the experimental manipulations they perform. Most technicians learn to curtail these attachments. Second, the "sacrifice" of lab animals becomes routinized and stripped of special meaning for many technicians, making killing uncomfortably rote. Third, technicians sometimes encounter outsiders who are critical of animal experimentation and ridicule the technicians for doing this work. Most technicians avoid telling outsiders about their work or take an educational approach to deal with these awkward encounters. Finally, most technicians report some ethical uneasiness about certain types of experiments and their clinical value, as well as about the use of certain animals, and they feel they cannot turn to investigators or fellow technicians to pursue such issues.

Corporate Functional Management Evaluation of the LLNL Radiation Safety Organization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sygitowicz, L S

2008-03-20

A Corporate Assess, Improve, and Modernize review was conducted at Lawrence Livermore National Laboratory (LLNL) to evaluate the LLNL Radiation Safety Program and recommend actions to address the conditions identified in the Internal Assessment conducted July 23-25, 2007. This review confirms the findings of the Internal Assessment of the Institutional Radiation Safety Program (RSP) including the noted deficiencies and vulnerabilities to be valid. The actions recommended are a result of interviews with about 35 individuals representing senior management through the technician level. The deficiencies identified in the LLNL Internal Assessment of the Institutional Radiation Safety Program were discussed with Radiationmore » Safety personnel team leads, customers of Radiation Safety Program, DOE Livermore site office, and senior ES&H management. There are significant issues with the RSP. LLNL RSP is not an integrated, cohesive, consistently implemented program with a single authority that has the clear roll and responsibility and authority to assure radiological operations at LLNL are conducted in a safe and compliant manner. There is no institutional commitment to address the deficiencies that are identified in the internal assessment. Some of these deficiencies have been previously identified and corrective actions have not been taken or are ineffective in addressing the issues. Serious funding and staffing issues have prevented addressing previously identified issues in the Radiation Calibration Laboratory, Internal Dosimetry, Bioassay Laboratory, and the Whole Body Counter. There is a lack of technical basis documentation for the Radiation Calibration Laboratory and an inadequate QA plan that does not specify standards of work. The Radiation Safety Program lack rigor and consistency across all supported programs. The implementation of DOE Standard 1098-99 Radiological Control can be used as a tool to establish this consistency across LLNL. The establishment of a site wide ALARA Committee and administrative control levels would focus attention on improved processes. Currently LLNL issues dosimeters to a large number of employees and visitors that do not enter areas requiring dosimetry. This includes 25,000 visitor TLDs per year. Dosimeters should be issued to only those personnel who enter areas where dosimetry is required.« less

Process Instrumentation. Teacher Edition.

ERIC Educational Resources Information Center

Brown, A. O., III; Fowler, Malcolm

This module provides instructional materials that are designed to help teachers train students in job skills for entry-level jobs as instrumentation technicians. This text addresses the basics of troubleshooting control loops, and the transducers, transmitters, signal conditioners, control valves, and controllers that enable process systems to…

Radiological Control Center (RADCC) Renaming Ceremony

NASA Image and Video Library

2017-03-31

Consoles in the Radiological Control Center at NASA's Kennedy Space Center are seen during ceremonies to name the facility in honor of Randy Scott. A professional health physicist of more than 40 years, Scott served as the Florida spaceport's Radiation Protection Officer for 14 years until his death June 17, 2016. Located in the Neil Armstrong Operations and Checkout building, the Randall E. Scott Radiological Control Center is staffed by technical and radiological experts from NASA, the U.S. Department of Energy, the U.S. Air Force 45th Space Wing and the state of Florida. The group performs data collection and assessment functions supporting launch site and field data collection activities.

Radiological Control Center (RADCC) Renaming Ceremony

NASA Image and Video Library

2017-03-31

A portion of the Radiological Control Center at NASA's Kennedy Space Center is seen during ceremonies to name the facility in honor of Randy Scott. A professional health physicist of more than 40 years, Scott served as the Florida spaceport's Radiation Protection Officer for 14 years until his death June 17, 2016. Located in the Neil Armstrong Operations and Checkout building, the Randall E. Scott Radiological Control Center is staffed by technical and radiological experts from NASA, the U.S. Department of Energy, the U.S. Air Force 45th Space Wing and the state of Florida. The group performs data collection and assessment functions supporting launch site and field data collection activities.

Radiological Control Center (RADCC) Renaming Ceremony

NASA Image and Video Library

2017-03-31

Space Center, presents Myrna Scott, widow of Randy Scott, with a replica of the emblem noting that the spaceport's Radiological Control Center has been named in honor of her husband who died last year. The ceremony in the center's Radiological Control Center honored the extensive contributions of Randy Scott. A professional health physicist of more than 40 years, Scott served as the Florida spaceport's Radiation Protection Officer for 14 years until his death June 17, 2016.

Prevalence and associated factors of job-related depression in laboratory technicians in Hospital Universiti Sains Malaysia (HUSM) and Ministry of Health Malaysia (MOH) Hospitals in Kelantan.

PubMed

Aziah, B D; Rusli, B N; Winn, T; Naing, L; Tengku, M A

2004-06-01

Karasek's job strain model postulates that workers chronically exposed to adverse psychosocial work environment (high strain job)--high psychological job demands and low job control, including poor social support, increased physical demand and hazardous work condition--will eventually develop both physical illnesses such as cardiovascular diseases and psychological disorders such as depression. In order to determine the prevalence and associated factors of job-related depression, a cross-sectional study was conducted among laboratory technicians in Hospital Universiti Sains Malaysia (HUSM) and Kementerian Kesihatan Malaysia (KKM) Hospitals in Kelantan between September 2001 and February 2002. One hundred and two laboratory technicians in HUSM and 79 laboratory technicians in 7 KKM Hospitals were selected; 84/102 (82.4%) in HUSM and 71/79 (89.9%) in KKM Hospitals responded. Data was collected using self-administered questionnaires of the validated Malay version of the Job Content Questionnaire (JCQ) originally developed by Robert Karasek. Results indicated that the prevalence of high job strain in laboratory technicians in HUSM and KKM hospitals was 33.3% (28/84) and 26.8% (19/71), respectively (p>0.05). Significantly higher proportion (59.5%) (50/84) of laboratory technicians in HUSM compared to those in KKM Hospitals (39.4%) (28/71) (p = 0.016) experienced job-related depression. Significant associated factors of job-related depression were low social support (HUSM: adjusted OR 4.7, 95% CI 1.2-18.8; KKM: adjusted OR 14.8, 95%CI 2.4-89.3), high psychological demand (HUSM: adjusted OR 3.0, 95%CI 1.0-8.8), and low decision authority (KKM: adjusted OR 9.7, 95%CI 1.0-91.1). We conclude that strengthening the social support network (supervisors' and coworkers' support), reducing psychological job demand, and increasing decision-making authority of laboratory technicians may go a long way towards reducing job-related depression.

A Study to Estimate the Effectiveness of Visual Testing Training for Aviation Maintenance Management

NASA Technical Reports Server (NTRS)

Law, Lewis Lyle

2007-01-01

The Air Commerce Act of 1926 set the beginning for standards in aviation maintenance. Even after deregulation in the late l970s, maintenance standards and requirements still have not changed far from their initial criteria. After a potential candidate completes Federal Aviation Administration training prerequisites, they may test for their Airframe and Powerplant (A&P) certificate. Performing maintenance in the aviation industry for a minimum of three years, the technician may then test for their Inspection Authorization (IA). After receiving their Airframe and Powerplant certificate, a technician is said to have a license to perform. At no time within the three years to eligibility for Inspection Authorization are they required to attend higher-level inspection training. What a technician learns in the aviation maintenance industry is handed down from a seasoned technician to the new hire or is developed from lessons learned on the job. Only in Europe has the Joint Aviation Authorities (JAA) required higher-level training for their aviation maintenance technicians in order to control maintenance related accidents (Lu, 2005). Throughout the 1990s both the General Accounting Office (GAO) and the National Transportation Safety Board (NTSB) made public that the FAA is historically understaffed (GAO, 1996). In a safety recommendation the NTSB stated "The Safety Board continues to lack confidence in the FAA's commitment to provide effective quality assurance and safety oversight of the ATC system (NTSB, 1990)." The Federal Aviation Administration (FAA) has been known to be proactive in creating safer skies. With such reports you would suspect the FAA to also be proactive in developing more stringent inspection training for aviation maintenance technicians. The purpose of this study is to estimate the effectiveness of higher-level inspection training, such as Visual Testing (VT) for aviation maintenance technicians, to improve the safety of aircraft and to make recommendations to management with regard to the value of such training.

National Manpower Inventory. Volume 3. Technical Documentation for Software for the Model

DTIC Science & Technology

1985-09-01

Technician APS-96 Search Radar IMA Technician USM-449 (V) & AAI 5500 Series ATE Int Maintenance Level Tech. CO CP-413/ASA-27A SACE TesI Bench IMA...MATE) Test Console IMA Technician ALQ-91/108 DECM IMA Technician ALQ-99 ECM Jammer/Tmilter & ALM-107 TesI Console IMA Technician ALQ-99 ECM Track...Receivers & ALM-109 TesI Console IMA Technician ECM Systems Intermediate Maintenance Technician ASM-347 (GT-1) SACE Programmer/Mainlenanca IMA

Thermography based prescreening software tool for veterinary clinics

NASA Astrophysics Data System (ADS)

Dahal, Rohini; Umbaugh, Scott E.; Mishra, Deependra; Lama, Norsang; Alvandipour, Mehrdad; Umbaugh, David; Marino, Dominic J.; Sackman, Joseph

2017-05-01

Under development is a clinical software tool which can be used in the veterinary clinics as a prescreening tool for these pathologies: anterior cruciate ligament (ACL) disease, bone cancer and feline hyperthyroidism. Currently, veterinary clinical practice uses several imaging techniques including radiology, computed tomography (CT), and magnetic resonance imaging (MRI). But, harmful radiation involved during imaging, expensive equipment setup, excessive time consumption and the need for a cooperative patient during imaging, are major drawbacks of these techniques. In veterinary procedures, it is very difficult for animals to remain still for the time periods necessary for standard imaging without resorting to sedation - which creates another set of complexities. Therefore, clinical application software integrated with a thermal imaging system and the algorithms with high sensitivity and specificity for these pathologies, can address the major drawbacks of the existing imaging techniques. A graphical user interface (GUI) has been created to allow ease of use for the clinical technician. The technician inputs an image, enters patient information, and selects the camera view associated with the image and the pathology to be diagnosed. The software will classify the image using an optimized classification algorithm that has been developed through thousands of experiments. Optimal image features are extracted and the feature vector is then used in conjunction with the stored image database for classification. Classification success rates as high as 88% for bone cancer, 75% for ACL and 90% for feline hyperthyroidism have been achieved. The software is currently undergoing preliminary clinical testing.

Evaluation and revision of checklists for screening facilities and municipal governmental programs for gastric cancer and colorectal cancer screening in Japan.

PubMed

Higashi, Takahiro; Machii, Ryoko; Aoki, Ayako; Hamashima, Chisato; Saito, Hiroshi

2010-11-01

To evaluate the appropriateness of current checklists created by a governmental committee to assess screening programs run by municipal governments and service provider facilities for gastric and colorectal cancer, and to accumulate expert opinions to provide insights aimed at the next revision. We convened an expert panel that consisted of physicians nominated by regional offices of the Japanese Society for Gastrointestinal Cancer Screening and radiology technicians nominated by the technician chapter of the society. The panel rated the appropriateness of each checklist item on a scale of 1-9 (1, extremely inappropriate; 9, extremely appropriate) twice, between which they had a face-to-face discussion meeting. During the process they were allowed to propose modifications and additions to the items. In the first round of rating, the panelists rated all 57 and 56 checklists items for gastric and colorectal cancer, respectively, as appropriate based on an acceptance rule determined a priori. During the process of the face-to-face discussion, however, the panel proposed modifications to 23 (40%) and 22 (39%) items, respectively, and the addition of 27 new items each. After integrating overlapping items and rating again for appropriateness, 66 and 64 items, respectively, were accepted as the revised checklist set. The expert panel considered current checklists for colorectal and gastric cancer-screening programs and facilities to be suitable. Their proposals for a new set of checklist items will help further improve the checklists.

Forensic Science Technician

ERIC Educational Resources Information Center

Tech Directions, 2010

2010-01-01

Forensic science technicians, also called crime laboratory technicians or police science technicians, help solve crimes. They examine and identify physical evidence to reconstruct a crime scene. This article discusses everything students need to know about careers for forensic science technicians--wages, responsibilities, skills needed, career…

EC02-0188-22

NASA Image and Video Library

2002-07-12

Technicians at General Atomics Aeronautical Systems, Inc., (GA-ASI) facility at Adelanto, Calif., carefully thread control lines through a bulkhead during engine installation on NASA's Altair aircraft.

47 CFR 97.9 - Operator license grant.

Code of Federal Regulations, 2010 CFR

2010-10-01

... grants are: Novice, Technician, Technician Plus (until such licenses expire, a Technical Class license granted before February 14, 1991, is considered a Technician Plus Class license), General, Advanced, and... grant. (b) The person named in an operator license grant of Novice, Technician, Technician Plus, General...

A System Approach to Navy Medical Education and Training. Appendix 15. Biotronics Technicians.

DTIC Science & Technology

1974-08-31

curricula based upon job analysis was implemented to a level of methodology determination. These methods and curriculum materials constituted a third...Therapy Technician 8495 Dermatology Technician 8496 Embalming Technician 8497 Medical Illustration Technician 8498 Medical Equipment Repair Technician... WET COMPRESSES/SOAKS/PACKS 24 ICONTROL BLEEDING BY PRESSURE DRESSING 25 1APPLY/CHANGE BANDAGES, E.G. ROLLER, TRIANGULAR, KURLEX GO TO RIGHT HAND PAGE

Installation of new Generation General Purpose Computer (GPC) compact unit

NASA Technical Reports Server (NTRS)

1991-01-01

In the Kennedy Space Center's (KSC's) Orbiter Processing Facility (OPF) high bay 2, Spacecraft Electronics technician Ed Carter (right), wearing clean suit, prepares for (26864) and installs (26865) the new Generation General Purpose Computer (GPC) compact IBM unit in Atlantis', Orbiter Vehicle (OV) 104's, middeck avionics bay as Orbiter Systems Quality Control technician Doug Snider looks on. Both men work for NASA contractor Lockheed Space Operations Company. All three orbiters are being outfitted with the compact IBM unit, which replaces a two-unit earlier generation computer.

ANTIBODY FORMATION IN WORKERS OF ROENTGEN DEPARTMENTS VACCINATED WITH LIVE TULAREMIA VACCINE (in Russian)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marder, B.B.

1961-01-01

Workers of roentgenological departments, physicians, roentgen technicians and auxiliary personnel (a totul of 15 persons) were immunized by the pericutaneous method with live tularemia vaccine. For comparison, subject to immunization were 5 medical workers not working in roentgenological departments. In all the persons immunized blood was taken 1, 2, 3 months and one year after the vaccination for studies of the agglutination titers of sera. The lowest antibody titer was seen in roentgen technicians, whereas the highest---in auxiliary personnel and the controls. (auth)

Crew Access Arm Installation onto Mobile Launcher

NASA Image and Video Library

2018-02-26

With a control panel visible in the foreground, a technician begins installation of the Orion crew access arm (CAA) to the mobile launcher (ML) tower at NASA's Kennedy Space Center in Florida. NASA's Exploration Ground Systems organization has been overseeing installation of umbilicals and other launch accessories on the 380-foot-tall ML in preparation for stacking the first launch of the Space launch System, or SLS, rocket with an Orion spacecraft. The CAA is designed to rotate from its retracted position and line up with Orion's crew hatch providing entry for astronauts and technicians.

Training pharmacy technicians to administer immunizations.

PubMed

McKeirnan, Kimberly C; Frazier, Kyle R; Nguyen, Maryann; MacLean, Linda Garrelts

To evaluate the effectiveness of an immunization training program for pharmacy technicians on technicians' self-reported confidence, knowledge, and number of vaccines administered. A one-group pre- and posttest study was conducted with certified pharmacy technicians from Albertsons and Safeway community pharmacies in Idaho. Thirty pharmacy technicians were recruited to participate in an immunization administration training program comprising a 2-hour home study and a 2-hour live training. Pharmacy technician scores on a 10-question knowledge assessment, responses on a pre- and posttraining survey, and number of immunizations administered in the 6-month period following the training were collected. Twenty-five pharmacy technicians completed the home study and live portions of the immunization training program. All 29 pharmacy technicians who took the home study assessment passed with greater than 70% competency on the first attempt. Technicians self-reported increased confidence with immunization skills between the pretraining survey and the posttraining survey. From December 2016 to May 2017, the technicians administered 953 immunizations with 0 adverse events reported. For the first time, pharmacy technicians have legally administered immunizations in the United States. Trained pharmacy technicians demonstrated knowledge of vaccination procedures and self-reported improved confidence in immunization skills and administered immunizations after participating in a 4-hour training program. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

24 CFR 291.530 - Eligible firefighter/emergency medical technicians.

Code of Federal Regulations, 2010 CFR

2010-04-01

... medical technicians. 291.530 Section 291.530 Housing and Urban Development Regulations Relating to Housing... medical technicians. A person qualifies as a firefighter/emergency medical technician for the purposes of... technician by a fire department or emergency medical services responder unit of the federal government, a...

Technical basis for implementation of remote reading capabilities for radiological control instruments at tank farms

DOE Office of Scientific and Technical Information (OSTI.GOV)

PIERSON, R.M.

1999-10-27

This document provides the technical basis for use of remote reading capabilities with radiological control instruments at River Protection Project facilities. The purpose of this document is to evaluate applications of remote reading capabilities with Radiological Control instrumentation to allow continuous monitoring of radiation dose rates at River Protection Project (RPP) facilities. In addition this document provides a technical basis and implementing guidelines for remote monitoring of dose rates and their potential contribution to maintaining radiation exposures ALARA.

5 CFR 315.610 - Noncompetitive appointment of certain National Guard technicians.

Code of Federal Regulations, 2010 CFR

2010-01-01

... National Guard technicians. 315.610 Section 315.610 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT... technicians. (a) An agency may appoint noncompetitively a National Guard technician who— (1) Was involuntarily... 3 years as a technician; (3) Meets the qualifications requirements of the job: and (4) Is appointed...

Current status, crisis and trends in Chinese dental technicians.

PubMed

Chaoyi, Ma; Liwei, Zheng; Li, Yue; Min, Zhou; Haiyang, Yu

2012-04-01

Chinese dental technicians play a significant role in the globalised market of dental prosthesis fabrication, but this subject has not been investigated in detail. The demand for dental prostheses increases as individuals pay increasing attention to their oral health. Therefore, it is important to investigate the status of Chinese dental technicians. To evaluate the current status of Chinese dental technicians. Dental technicians' resumés, which reveal information regarding dental technician manpower, degrees, working age and salary, etc., were analysed and compared with those abroad. We also estimated the future demands of dental technician manpower, and discussed some potential solutions. There are fewer dental technicians in China than in other developed countries; they are also of a lower standard. Male technicians outnumber females. The education level of technicians is insufficient, and the education programme is still in its exploratory stage. The development of dental technician teams in China represents both an opportunity and a challenge. It is important to move forward from the current situation to yield long-term development. This article provides information on the Chinese dental technology industry, identifies the problems and offers solutions for its development. © 2012 FDI World Dental Federation.

Mentor program boosts new nurses' satisfaction and lowers turnover rate.

PubMed

Fox, Kathy C

2010-07-01

In 2004, the turnover rate among first-year registered nurses (RNs) at St. Francis Hospital and Health Centers had mushroomed to 31%. Based on research, in 2006, the hospital embarked on a journey to implement an RN mentor program to improve satisfaction and reduce turnover. A pilot program was initiated, including 12 RN mentors and 12 RN protégés from select nursing units. The results showed a 0% turnover rate during the 1-year pilot program. Based on these findings, the mentor program was expanded to include RNs working in inpatient nursing units and surgery and emergency departments. Each year, the RN turnover rate has decreased. In 2009, the turnover rate was 10.3%. Because of the success of the program, it has been expanded in scope to include other professionals experiencing high turnover in targeted departments, including radiological technicians, respiratory therapists, pharmacists, and physical therapists.

30 Years of radiotherapy service in Southern Thailand: workload vs resources.

PubMed

Phungrassami, Temsak; Funsian, Amporn; Sriplung, Hutcha

2013-01-01

To study the pattern of patient load, personnel and equipment resources from 30-years experience in Southern Thailand. This retrospective study collected secondary data from the Division of Therapeutic Radiology and Oncology and the Songklanagarind Hospital Tumor Registry database, Faculty of Medicine, Prince of Songkla University, during the period of 1982-2012. The number of new patients who had radiation treatment gradually increased from 121 in 1982 to 2,178 in 2011. Shortages of all kinds of personnel were demonstrated as compared to the recommendations, especially in radiotherapy technicians. In 2011, Southern Thailand, with two radiotherapy centers, had 0.44 megavoltage radiotherapy machines (cobalt or linear accelerator) per million of population. This number is suboptimal, but could be managed cost-effectively by prolonging machine operating times during personnel shortages. This study identified a discrepancy between workload and resources in one medical school radiotherapy center in.

Compassion fatigue and burnout: prevalence among oncology nurses.

PubMed

Potter, Patricia; Deshields, Teresa; Divanbeigi, Joyce; Berger, Julie; Cipriano, Doreen; Norris, Lori; Olsen, Sarah

2010-10-01

This descriptive, cross-sectional survey was conducted in inpatient nursing units and outpatient clinics in a cancer center in the midwestern United States. The sample of 153 healthcare providers included RNs, medical assistants, and radiology technicians. The fourth revision of the 30-item Professional Quality of Life (ProQOL R-IV) scale was used for measuring compassion fatigue, compassion satisfaction, and burnout. A series of cross tab analyses examined the relationship between participant demographics and three ProQOL R-IV subscales. The study sample scored similarly on compassion satisfaction and burnout when compared with participants who used the ProQOL R-IV in previous studies. Value exists in analyzing the prevalence of burnout and compassion fatigue among oncology healthcare providers. Understanding the needs of distinct demographic groups offers valuable direction for intervention program development. Applying internal evidence in the design of a relevant stress-reduction program will better equip healthcare providers to recognize and manage compassion fatigue and burnout.

Genotoxic damage in auto body shop workers.

PubMed

Siebel, Anna Maria; Basso da Silva, Luciano

2010-10-01

Some studies have shown increased DNA damage among car painters, but other professionals working in auto body and paint shops have not been extensively assessed. The aim of this study was to assess DNA damage in different types of auto body shop workers by measuring micronucleus (MN) levels in exfoliated buccal cells. The mean number of cells with MN per 2000 exfoliated buccal cells was analyzed in three groups of male workers: auto body repair technicians, painters, and office workers (control group). All participants answered a questionnaire inquiring about age, smoking habits, alcohol consumption, work practices, occupational exposure time, job activities, and use of protective equipment. The mean number of cells with MN was 3.50 ± 1.50 in auto body painters, 3.91 ± 2.10 in auto body repair technicians, and 0.80 ± 0.78 in office workers, with a significant difference between the control group and the two other groups (p = 0.0001). Age, occupational exposure time, use of protective masks, alcohol consumption, and smoking habit did not affect MN results. The findings indicate that technicians and painters working in auto body shops are at risk for genotoxic damage, while office workers seem to be protected.

Westinghouse corporate development of a decision software program for Radiological Evaluation Decision Input (REDI)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bush, T.S.

1995-03-01

In December 1992, the Department of Energy (DOE) implemented the DOE Radiological Control Manual (RCM). Westinghouse Idaho Nuclear Company, Inc. (WINCO) submitted an implementation plan showing how compliance with the manual would be achieved. This implementation plan was approved by DOE in November 1992. Although WINCO had already been working under a similar Westinghouse RCM, the DOE RCM brought some new and challenging requirements. One such requirement was that of having procedure writers and job planners create the radiological input in work control procedures. Until this time, that information was being provided by radiological engineering or a radiation safety representative.more » As a result of this requirement, Westinghouse developed the Radiological Evaluation Decision Input (REDI) program.« less

Technician Consistency in Specular Microscopy Measurements: A "Real-World" Retrospective Analysis of a United States Eye Bank.

PubMed

Rand, Gabriel M; Kwon, Ji Won; Gore, Patrick K; McCartney, Mitchell D; Chuck, Roy S

2017-10-01

To quantify consistency of endothelial cell density (ECD) measurements among technicians in a single US eye bank operating under typical operating conditions. In this retrospective analysis of 51 microscopy technicians using a semiautomated counting method on 35,067 eyes from July 2007 to May 2015, technician- and date-related marginal ECD effects were calculated using linear regression models. ECD variance was correlated with the number of specular microscopy technicians. Technician mean ECDs ranged from 2386 ± 431 to 3005 ± 560 cells/mm. Nine technicians had statistically and clinically significant marginal effects. Annual mean ECDs adjusted for changes in technicians ranged from 2422 ± 433 to 2644 ± 430 cells/mm. The period of 2007 to 2009 had statistically and clinically significant marginal effects. There was a nonstatistically significant association between the number of technicians and ECD standard deviation. There was significant ECD variability associated with specular microscopy technicians and with the date of measurement. We recommend that eye banks collect data related to laboratory factors that have been shown to influence ECD variability.

Radiological control manual. Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kloepping, R.

1996-05-01

This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPPmore » and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP.« less

Occupational risk factors for testicular cancer: a registry-based case-control study in Rhineland Palatinate – Germany

PubMed Central

Yousif, Lamyaa; Hammer, Gaël P.; Emrich, Katharina; Blettner, Maria; Zeeb, Hajo

2013-01-01

Objectives: Testicular cancer affects mainly men below the age of 50. An association with occupation and social status has been suggested but risk factors are not well understood. A registry-based case-control study focusing on occupation was performed in Germany. Methods: All 348 testicular cancer cases with available gainful occupational information registered between 2000 and 2005; as well as 564 suitable controls (from a pool of other cancers) were drawn from the Cancer Registry of Rhineland-Palatinate. Unconditional logistic regression was used to compute odds ratios (OR) and associated 95% confidence intervals (CI). Results: Slightly elevated OR were observed for technicians and related professionals (OR 1.62, 95% CI 1.00–2.63) and for clerical support workers (OR 1.71, 95% CI 1.14–2.56). This increase was highest in the age group 20–50 for technicians (OR 2.02, 95% CI 1.23–3.33) and clerks (OR 2.00, 95% CI 1.30–3.09), respectively. An association with testicular cancer was observed for no other occupation. Conclusion: An increased risk of testicular cancer was observed for technicians and related professionals and clerical support workers. This could be related to socioeconomic status or sedentary life style, two factors that were identified in previous studies. While the feasibility of a purely registry-based study was shown, missing occupational data and the choice of cancer controls represent challenges to the validity of this approach. PMID:24265602

47 CFR 97.201 - Auxiliary station.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Technician, Technician Plus, General, Advanced or Amateur Extra Class operator license may be an auxiliary station. A holder of a Technician, Technician Plus, General, Advanced or Amateur Extra Class operator...

Highway Surveying. Instructor's Guide for an Adult Course. Highway Technicians Program Unit III.

ERIC Educational Resources Information Center

Fimmano, Ralph; Kacharian, John C.

The revised instructor's guide, which is part of the New York State Highway Technician's Program to provide needed technicians and engineers by upgrading people in the lower-level technician jobs, is geared toward the improvement of technical skills and knowledge in highway surveying. In view of the shortage of qualified technicians and engineers…

Individual Radiation Protection Monitoring in the Marshall Islands: Utrok Atoll (2003-2004)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamilton, T F; Kehl, S; Hickman, D

2006-01-17

The United States Department of Energy (U.S. DOE) has recently implemented a series of strategic initiatives to address long-term radiological surveillance needs at former U.S. nuclear test sites in the Marshall Islands. The plan is to engage local atoll communities in developing shared responsibilities for implementing radiation protection monitoring programs for resettled and resettling populations in the northern Marshall Islands. Using the pooled resources of the U.S. DOE and local atoll governments, individual radiological surveillance programs have been developed in whole body counting and plutonium urinalysis in order to accurately assess radiation doses resulting from the ingestion and uptake ofmore » fallout radionuclides contained in locally grown foods. Permanent whole body counting facilities have been established at three separate locations in the Marshall Islands (Figure 1). These facilities are operated and maintained by Marshallese technicians with scientists from the Lawrence Livermore National Laboratory (LLNL) providing on-going technical support services. Bioassay samples are collected under controlled conditions and analyzed for plutonium isotopes at the Center for Accelerator Mass Spectrometry at LLNL using state-of-the art measurement technologies. We also conduct an on-going environmental monitoring and characterization program at selected sites in the northern Marshall Islands. The aim of the environmental program is to determine the level and distribution of important fallout radionuclides in soil, water and local foods with a view towards providing more accurate and updated dose assessments, incorporating knowledge of the unique behaviors and exposure pathways of fallout radionuclides in coral atoll ecosystems. These scientific studies have also been essential in helping guide the development of remedial options used in support of island resettlement. Together, the individual and environmental radiological surveillance programs are helping meet the informational needs of the U.S. DOE and the Republic of the Marshall Islands. Our updated environmental assessments provide a strong scientific basis for predicting future change in exposure conditions especially in relation to changes in life-style, diet and/or land-use patterns. This information has important implications in addressing questions about existing (and future) radiological conditions on the islands, in determining the cost and the effectiveness of potential remedial measures, and in general policy support considerations. Perhaps most importantly, the recently established individual radiological surveillance programs provide affected atoll communities with an unprecedented level of radiation protection monitoring where, for the first time, local resources are being made available to monitor resettled and resettling populations on a continuous basis. As a hard copy supplement to Marshall Islands Program website (http://eed.llnl.gov/mi/), this document provides an overview of the individual radiation surveillance monitoring program established for the Utrok Atoll population group along with a full disclosure of all verified measurement data (2003-2004). The Utrok whole body counting facility has been temporarily stationed on Majuro Atoll and, in cooperation with the Utrok Atoll Local Government, serves as a national facility open to the general public. Readers are advised that an additional feature of the associated website is a provision whereby users are able to calculate and track radiation doses delivered to volunteers (de-identified information only) participating in the Marshall Islands Radiological Surveillance Program.« less

Is work in education child's play? Understanding risks to educators arising from work organization and design of work spaces.

PubMed

Seifert, Ana María

2007-01-01

The educational sector exposes its primarily female work force to numerous psychosocial risk factors. At the request of the education workers', ergonomists developed a participatory research project in order to understand the determinants of the difficulties experienced by special education technicians. These technicians work with students presenting behavioral and learning difficulties as well as developmental and mental health problems. Eighteen technicians were interviewed and the work of seven technicians and two teachers was observed. Technicians prevent and manage crisis situations and help students acquire social skills. Coordination with teachers is made difficult by the fact that most technicians work part time, part year, and many technicians' work areas and classrooms are physically distant one from another. Most technicians change schools each year and must continually reconstruct work teams. Management strategies and poorly adapted working spaces can have important repercussions on coordination among educators and on technicians' capacity to help students and prevent aggressive behavior.

Can they do it? Comparing the views of pharmacists and technicians to the introduction of an advanced technician role.

PubMed

Napier, Patti; Norris, Pauline; Green, James; Braund, Rhiannon

2016-04-01

This study aimed to investigate the opinions of pharmacists and technicians regarding the ability of New Zealand technicians to take on an advanced checking technician role. A survey was developed to investigate the opinions regarding the introduction of this new role. The questions covered are: perceived ability to take on the role, training requirements and competence. Surveys were sent to pharmacists whose contact details are available for research purposes (n = 2095) and to all pharmacies in New Zealand (both community and hospital) for the attention of technicians (n = 858). The results were analysed using IBM SPSS and thematic analysis of comments was conducted. A total of 1221 surveys were returned (pharmacists = 736 and technicians = 485). The majority of the technicians (83%) believed that 'some' technicians could work in a CT role, compared with 73% of the pharmacists. Over two-thirds (69%) of the technicians felt comfortable checking a prescription at their current level of training compared with 53% of pharmacists. Both groups' comfort increased with further specific training for the technicians. The majority of both of these groups supported the change in roles. Pharmacists were less confident that technicians could take on this role now, but were more comfortable after extra training had been completed. The technicians, however, were confident they could take on this role now but would take on extra training if needed. © 2015 Royal Pharmaceutical Society.

ELECTRICAL AND ELECTRONIC INDUSTRIAL CONTROL, STATIC CONTROL SERIES. BASIC CONTROL FUNCTIONS, UNIT 9A.

ERIC Educational Resources Information Center

SUTTON, MACK C.

THIS SELF-INSTRUCTIONAL PROGRAMED TEXT IS FOR INDIVIDUAL STUDENT USE IN STUDYING STATIC CONTROL IN ELECTRICAL-ELECTRONIC PROGRAMS. IT WAS DEVELOPED BY AN INSTRUCTIONAL MATERIALS SPECIALIST AND ADVISERS AND HAS BEEN TESTED BY STUDENT USE. THE OBJECTIVE OF THE COURSE IS TO HELP THE ELECTRICAL-TECHNICIAN DEVELOP AN UNDERSTANDING OF STATIC CONTROL…

Data analyst technician: an innovative role for the pharmacy technician.

PubMed

Ervin, K C; Skledar, S; Hess, M M; Ryan, M

2001-10-01

The development of an innovative role for the pharmacy technician is described. The role of the pharmacy technician was based on a needs assessment and the expertise of the pharmacy technician selected. Initial responsibilities of the technician included chart reviews, benchmarking surveys, monthly financial impact analysis, initiative assessment, and quality improvement reporting. As the drug-use and disease-state management (DUDSM) program expanded, pharmacist activities increased, requiring the expansion of data analyst technician (DAT) duties. These new responsibilities included participation in patient assessment, data collection and interpretation, and formulary enforcement. Most recently, technicians' expanded duties include maintenance of a physician compliance profiling database, quality improvement reporting and graphing, active role in patient risk assessment and database management for adult vaccination, and support of financial impact monitoring for other institutions within the health system. This pharmacist-technician collaboration resulted a threefold increase in patient assessments completed per day. In addition, as the DUDSM program continues to expand across the health system, an increase in DAT resources from 0.5 to 1.0 full-time equivalent was obtained. The role of the DAT has increased the efficiency of the DUDSM program and has provided an innovative role for the pharmacy technician.

Technical Support. Focus on Careers.

ERIC Educational Resources Information Center

Thiers, Naomi

1996-01-01

Describes work conditions, education and training needs, and salaries of the following technician careers: auto/diesel technicians, auto body repairers, general maintenance mechanics, heating/air conditioning/refrigeration, paralegals, engineering technicians, science technicians, computer repairers, and drafters. (SK)

Installing Electronics in Juno Vault

NASA Image and Video Library

2010-12-16

Technicians install components that will aid with guidance, navigation and control of NASA Juno spacecraft. Like most of Juno sensitive electronics, these components are situated within the spacecraft titanium radiation vault.

Obstacles for optimal tuberculosis case detection in primary health centers (PHC) in Sidoarjo district, East Java, Indonesia

PubMed Central

Wahyuni, Chatarina U; Budiono; Rahariyani, Lutfia Dwi; Sulistyowati, Muji; Rachmawati, Tety; Djuwari; Yuliwati, Sri; van der Werf, Marieke J

2007-01-01

Background Pulmonary tuberculosis (TB) is a major health problem worldwide. Detection of the most infectious cases of tuberculosis – sputum smear-positive pulmonary cases – by passive case finding is an essential component of TB control. The district of Sidoarjo in East Java reported a low case detection rate (CDR) of 14% in 2003. We evaluated the diagnostic process for TB in primary health care centers (PHC) in Sidoarjo district to assess whether problems in identification of TB suspects or in diagnosing TB patients can explain the low CDR. Methods We performed interviews with the staff (general nurse, TB worker, laboratory technician, and head of health center) of the 25 PHCs of Sidoarjo district to obtain information about the knowledge of TB, health education practices, and availability of support services for TB diagnosis. The quality of the laboratory diagnosis was examined by providing 10 slides with a known result to the laboratory technicians for re-examination. Results Eighty percent of the nurses and 84% of the TB workers knew that cough >3 weeks can be a symptom of TB. Only 40% of the nurses knew the cause of TB, few could mention complications of TB and none could mention the duration of infectiousness after start of treatment. Knowledge of TB workers was much better. Information about how to produce a good sputum sample was provided to TB suspects by 76% of the nurses and 84% of the TB workers. Only few provided all information. Fifty-five percent of the 11 laboratory technicians correctly identified all positive slides as positive and 45% correctly identified 100% of the negative slides as negative. All TB workers, one general nurses and 32% of the laboratory technicians had received specific training in TB control. There has been no shortage of TB forms and laboratory materials in 96% of the PHCs. Conclusion The quality of the diagnostic process for TB at PHC in Sidoarjo district should be improved on all levels. Training in TB control of all general nurses and the laboratory technicians that have not received training would be a good first step to enhance diagnosis of TB and to improve the case detection rate. PMID:17760984

Local technicians in long-term research projects: evaluation of 25 years experience in an active tropical research station.

PubMed

Hurtado, Johanna; Clark, David B

2011-12-01

Most field ecology is conceived and financed by scientists from urban areas but is actually carried out in rural areas. Field staff can either be imported from urban areas or recruited from local residents. We evaluated the advantages and disadvantages of involving rural residents as local technicians over a 25- year period at active field research site in Costa Rica. We defined "local technicians" as local residents with no university education who acquired significant experience in field data collection, data management and/or laboratory work. We analyzed the experiences of incorporating these technicians into field research in developing countries from the points of view of scientist and of the local technicians themselves. Primary data were written responses from to a standardized survey of 19 senior scientists and Ph.D. students,and results from standardized personal interviews with 22 local technicians. Researchers highlighted the advantages of highly-skilled technicians with minimal staff turnover, as well as the technicians' knowledge of local ecological conditions. Local technicians considered the primary advantages of their jobs to be opportunities for continuing education training in science as well as cultural enrichment through interactions with people of different cultures. The main challenges identified by researchers were the lack of long-term funding for projects and extended training required for local technicians. Local technicians can be of great benefit to research projects by providing high-quality data collection at reasonable costs with low staff turnover. Over the last 25 years the research model at the field station we studied has evolved to the point that most long-term projects now depend heavily on local technicians. This model of involving local technicians in long-term research has multiple benefits for the researchers, the technicians and the local community, and could be adapted to a variety of settings in rural areas of developing countries.

PA-30 Twin Comanche - NASA 808 in hangar

NASA Image and Video Library

1980-05-05

Technicians check instrumentation and systems on NASA 808, a PA-30 aircraft, prior to a research flight. The aircraft was used as the testbed in development of control systems for remotely piloted vehicles that were "flown" from the ground. The concept led to highly successful programs such as the HiMAT and the subscale F-15 remotely piloted vehicles. Over the years, NASA 808 has also been used for spin and stall research related to general aviation aircraft and also research to alleviate wake vortices behind large jetliners. This 1980 photograph taken inside a hangar shows technicians measuring moment of inertia.

NHEXAS PHASE I MARYLAND STUDY--TECHNICIAN WALKTHROUGH QUESTIONNAIRE DATA

EPA Science Inventory

The Technician Walkthrough questionnaire data set contains information about each household as determined during a walkthrough by trained technicians. The information is from 403 technician walkthrough questionnaires for 80 households across 6 cycles. The questionnaire includes...

Uptake and impact of regulated pharmacy technicians in Ontario community pharmacies.

PubMed

Grootendorst, Paul; Shim, Minsup; Tieu, Jimmy

2018-01-01

Since 2010, most provincial Colleges of Pharmacists have licensed pharmacy technicians. The colleges hoped this would give pharmacists time to provide "expanded scope" activities such as medication reviews. Little is known, however, about the uptake and impact of pharmacy technicians on pharmacists' provision of such services. We address these questions using data for Ontario community pharmacies. Data on pharmacists and pharmacy technicians were obtained from the Ontario College of Pharmacists website in September 2016. Their place of employment was used to calculate the number of full-time equivalent (FTE) pharmacists and technicians employed at each community pharmacy. Pharmacy claims data for the 12-month period ending March 31, 2016, were obtained from the Ontario Public Drug Programs (OPDP). These data included number of MedsChecks performed, type of MedsCheck and number of prescriptions dispensed to OPDP beneficiaries. Pharmacy technicians were employed in 24% of the pharmacies in our sample. Technician employment rates were highest in Central Fill pharmacies and pharmacies serving long-term care facilities. In general, pharmacies employing 1 or fewer technician full-time equivalents (FTEs) had a slightly higher probability of providing MedsChecks and, of those that did provide Meds Checks Annuals, provided more of them. Pharmacies that hired 3 or more technician FTEs were markedly less likely to provide MedsChecks. Pharmacies differ in their employment of technicians and in the apparent impact of technicians on the provision of MedsChecks. However, these represent associations. Additional research is needed to assess the causal effect of technician employment on the provision of MedsChecks.

Uptake and impact of regulated pharmacy technicians in Ontario community pharmacies

PubMed Central

Grootendorst, Paul; Shim, Minsup

2018-01-01

Background: Since 2010, most provincial Colleges of Pharmacists have licensed pharmacy technicians. The colleges hoped this would give pharmacists time to provide “expanded scope” activities such as medication reviews. Little is known, however, about the uptake and impact of pharmacy technicians on pharmacists’ provision of such services. We address these questions using data for Ontario community pharmacies. Methods: Data on pharmacists and pharmacy technicians were obtained from the Ontario College of Pharmacists website in September 2016. Their place of employment was used to calculate the number of full-time equivalent (FTE) pharmacists and technicians employed at each community pharmacy. Pharmacy claims data for the 12-month period ending March 31, 2016, were obtained from the Ontario Public Drug Programs (OPDP). These data included number of MedsChecks performed, type of MedsCheck and number of prescriptions dispensed to OPDP beneficiaries. Results: Pharmacy technicians were employed in 24% of the pharmacies in our sample. Technician employment rates were highest in Central Fill pharmacies and pharmacies serving long-term care facilities. In general, pharmacies employing 1 or fewer technician full-time equivalents (FTEs) had a slightly higher probability of providing MedsChecks and, of those that did provide Meds Checks Annuals, provided more of them. Pharmacies that hired 3 or more technician FTEs were markedly less likely to provide MedsChecks. Conclusions: Pharmacies differ in their employment of technicians and in the apparent impact of technicians on the provision of MedsChecks. However, these represent associations. Additional research is needed to assess the causal effect of technician employment on the provision of MedsChecks. PMID:29796133

A Novel Simulation Technician Laboratory Design: Results of a Survey-Based Study

PubMed Central

Hughes, Patrick G; Friedl, Ed; Ortiz Figueroa, Fabiana; Cepeda Brito, Jose R; Frey, Jennifer; Birmingham, Lauren E; Atkinson, Steven Scott

2016-01-01

Objective  The purpose of this study was to elicit feedback from simulation technicians prior to developing the first simulation technician-specific simulation laboratory in Akron, OH. Background Simulation technicians serve a vital role in simulation centers within hospitals/health centers around the world. The first simulation technician degree program in the US has been approved in Akron, OH. To satisfy the requirements of this program and to meet the needs of this special audience of learners, a customized simulation lab is essential.  Method A web-based survey was circulated to simulation technicians prior to completion of the lab for the new program. The survey consisted of questions aimed at identifying structural and functional design elements of a novel simulation center for the training of simulation technicians. Quantitative methods were utilized to analyze data. Results Over 90% of technicians (n=65) think that a lab designed explicitly for the training of technicians is novel and beneficial. Approximately 75% of respondents think that the space provided appropriate audiovisual (AV) infrastructure and space to evaluate the ability of technicians to be independent. The respondents think that the lab needed more storage space, visualization space for a large number of students, and more space in the technical/repair area. Conclusions  A space designed for the training of simulation technicians was considered to be beneficial. This laboratory requires distinct space for technical repair, adequate bench space for the maintenance and repair of simulators, an appropriate AV infrastructure, and space to evaluate the ability of technicians to be independent. PMID:27096134

A Novel Simulation Technician Laboratory Design: Results of a Survey-Based Study.

PubMed

Ahmed, Rami; Hughes, Patrick G; Friedl, Ed; Ortiz Figueroa, Fabiana; Cepeda Brito, Jose R; Frey, Jennifer; Birmingham, Lauren E; Atkinson, Steven Scott

2016-03-16

OBJECTIVE : The purpose of this study was to elicit feedback from simulation technicians prior to developing the first simulation technician-specific simulation laboratory in Akron, OH. Simulation technicians serve a vital role in simulation centers within hospitals/health centers around the world. The first simulation technician degree program in the US has been approved in Akron, OH. To satisfy the requirements of this program and to meet the needs of this special audience of learners, a customized simulation lab is essential. A web-based survey was circulated to simulation technicians prior to completion of the lab for the new program. The survey consisted of questions aimed at identifying structural and functional design elements of a novel simulation center for the training of simulation technicians. Quantitative methods were utilized to analyze data. Over 90% of technicians (n=65) think that a lab designed explicitly for the training of technicians is novel and beneficial. Approximately 75% of respondents think that the space provided appropriate audiovisual (AV) infrastructure and space to evaluate the ability of technicians to be independent. The respondents think that the lab needed more storage space, visualization space for a large number of students, and more space in the technical/repair area. CONCLUSIONS : A space designed for the training of simulation technicians was considered to be beneficial. This laboratory requires distinct space for technical repair, adequate bench space for the maintenance and repair of simulators, an appropriate AV infrastructure, and space to evaluate the ability of technicians to be independent.

10 CFR 835.501 - Radiological areas.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Radiological areas. 835.501 Section 835.501 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Entry Control Program § 835.501 Radiological areas. (a.... These authorizations shall specify radiation protection measures commensurate with the existing and...

10 CFR 835.501 - Radiological areas.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Radiological areas. 835.501 Section 835.501 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Entry Control Program § 835.501 Radiological areas. (a.... These authorizations shall specify radiation protection measures commensurate with the existing and...

10 CFR 835.501 - Radiological areas.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false Radiological areas. 835.501 Section 835.501 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Entry Control Program § 835.501 Radiological areas. (a.... These authorizations shall specify radiation protection measures commensurate with the existing and...

10 CFR 835.501 - Radiological areas.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Radiological areas. 835.501 Section 835.501 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Entry Control Program § 835.501 Radiological areas. (a.... These authorizations shall specify radiation protection measures commensurate with the existing and...

10 CFR 835.501 - Radiological areas.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Radiological areas. 835.501 Section 835.501 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Entry Control Program § 835.501 Radiological areas. (a.... These authorizations shall specify radiation protection measures commensurate with the existing and...

40 CFR 745.90 - Renovator certification and dust sampling technician certification.

Code of Federal Regulations, 2010 CFR

2010-07-01

... sampling technician certification. 745.90 Section 745.90 Protection of Environment ENVIRONMENTAL PROTECTION... RESIDENTIAL STRUCTURES Residential Property Renovation § 745.90 Renovator certification and dust sampling technician certification. (a) Renovator certification and dust sampling technician certification. (1) To...

Medical examinations for radiation workers

NASA Technical Reports Server (NTRS)

Alexander, R. E.

1969-01-01

The NASA radiological protection policy allows an employee to be assigned work in a radiologically controlled area only if all of the following conditions are met: (1) The area must be radiologically safe for the intended operations; (2) the employee must be medically fit; (3) the employee must be properly trained; (4) appropriate radiation protection procedures must be prepared; (5) appropriate dosimetric, survey, surveillance and reporting procedures must be implemented; and (6) adequate controls and records must be established.

Wireless Time Tracking Improves Productivity at CSU Long Beach.

ERIC Educational Resources Information Center

Charmack, Scott; Walsh, Randy

2002-01-01

Describes California State University Long Beach's implementation of new maintenance management software, which integrated maintenance, inventory control, and key control and allows technicians to enter and receive information through handheld wireless devices for more accurate time accounting. The school estimates a 10 percent increase in…

Computer-Integrated Manufacturing Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Lakeland Tech Prep Consortium, Kirtland, OH.

This tech prep competency profile covers these occupations: manufacturing technician, computer-assisted design and drafting (CADD) technician, quality technician, and mechanical technician. Section 1 provides occupation definitions. Section 2 lists development committee members. Section 3 provides the leveling codes---abbreviations for grade level…

Environmental Technician Training in the United Kingdom.

ERIC Educational Resources Information Center

Potter, John F.

1985-01-01

Stresses the need for qualified environmental science technicians and for training courses in this area. Provides program information and statistical summarization of a national diploma program for environmental technicians titled "Business and Technician Education Council." Reviews the program areas of environmental analysis and…

47 CFR 97.505 - Element credit.

Code of Federal Regulations, 2010 CFR

2010-10-01

... but within the grace period for renewal) FCC-granted Technician or Technician Plus Class operator (including a Technician Class operator license granted before February 14, 1991) license grant: Element 2. (4) An expired FCC-issued Technician Class operator license document granted before March 21, 1987...

Evaluating the accuracy of technicians and pharmacists in checking unit dose medication cassettes.

PubMed

Ambrose, Peter J; Saya, Frank G; Lovett, Larry T; Tan, Sandy; Adams, Dale W; Shane, Rita

2002-06-15

The accuracy rates of board-registered pharmacy technicians and pharmacists in checking unit dose medication cassettes in the inpatient setting at two separate institutions were examined. Cedars-Sinai Medical Center and Long Beach Memorial Medical Center, both in Los Angeles county, petitioned the California State Board of Pharmacy to approve a waiver of the California Code of Regulations to conduct an experimental program to compare the accuracy of unit dose medication cassettes checked by pharmacists with that of cassettes checked by trained, certified pharmacy technicians. The study consisted of three parts: assessing pharmacist baseline checking accuracy (Phase I), developing a technician-training program and certifying technicians who completed the didactic and practical training (Phase II), and evaluating the accuracy of certified technicians checking unit dose medication cassettes as a daily function (Phase III). Twenty-nine pharmacists and 41 technicians (3 of whom were pharmacy interns) participated in the study. Of the technicians, all 41 successfully completed the didactic and practical training, 39 successfully completed the audits and became certified checkers, and 2 (including 1 of the interns) did not complete the certification audits because they were reassigned to another work area or had resigned. In Phase II, the observed accuracy rate and its lower confidence limit exceeded the predetermined minimum requirement of 99.8% for a certified checker. The mean accuracy rates for technicians were identical at the two institutions (p = 1.0). The difference in mean accuracy rates between pharmacists (99.52%; 95% confidence interval [CI] 99.44-99.58%) and technicians, (99.89%; 95% CI 99.87-99.90%) was significant (p < 0.0001). Inpatient technicians who had been trained and certified in a closely supervised program that incorporated quality assurance mechanisms could safely and accurately check unit dose medication cassettes filled by other technicians.

Clinical Experience and Learning Style of Flight Nurse and Aeromedical Evacuation Technician Students.

PubMed

De Jong, Marla J; Dukes, Susan F; Dufour, Karey M; Mortimer, Darcy L

2017-01-01

The clinical experience and preferred learning style of U.S. Air Force flight nurses and aeromedical evacuation technicians are unknown. Using a cross-sectional survey design, we gathered data regarding the clinical experience, level of comfort providing clinical care, and preferred learning style of 77 active duty (AD), Air Force Reserve (AFR), and Air National Guard (ANG) nurses enrolled in the U.S. Air Force School of Aerospace Medicine Flight Nurse course, and 121 AD, AFR, and ANG medical technicians enrolled in the Aeromedical Evacuation Technician course. Nurses and medical technicians reported 7.6 ± 5.5 and 3.9 ± 4.5 yr of experience, respectively. AD, AFR, and ANG nurses had comparable years of experience: 5.8 ± 3.2, 8.3 ± 6.6, and 7.9 ± 4.2 yr, respectively; however, AD medical technicians had more years of experience (5.6 ± 4.4 yr) than AFR (3.1 ± 4.8 yr) and ANG (1.9 ± 2.8 yr) medical technicians. Both nurses and medical technicians reported infrequently caring for patients with various disease processes and managing equipment or devices that they will routinely encounter when transporting patients as an aeromedical evacuation clinician. Nurses and medical technicians preferred a kinesthetic learning style or a multimodal learning style that included kinesthetic learning. Nearly all (99%) nurses and 97% of medical technicians identified simulation as their preferred teaching method. These findings confirm faculty concerns regarding the clinical experience of flight nurse and aerospace evacuation technician students.De Jong MJ, Dukes SF, Dufour KM, Mortimer DL. Clinical experience and learning style of flight nurse and aeromedical evacuation technician students. Aerosp Med Hum Perform. 2017; 88(1):23-29.

Establishing a clinical pharmacy technician at a United States Army military treatment facility.

PubMed

Evans, Jennifer L; Gladd, Ellen M; Gonzalez, Alicia C; Tranam, Salman; Larrabee, Joni M; Lipphardt, Sarah E; Chen, Tina T; Ronn, Michael D; Spain, John

2016-01-01

To describe the creation of a clinical pharmacy technician position within the U.S. Army and to identify the personal skills and characteristics required to meet the demands of this role. An outpatient military treatment facility located in Maryland. The clinical pharmacy technician position was designed to support clinical pharmacy services within a patient-centered medical home. Funding and a position description were established to hire a clinical pharmacy technician. Expected duties included administrative (45%), patient education (30%), and dispensing (25%). Local policy, in accordance with federal law and U.S. Army regulations, was developed to define the expanded technician responsibility to deliver patient medication education. In the initial 3 months, the clinical pharmacy technician spent 24 hours per week on clinical activities, affording an additional 10-15 hours per week for clinical pharmacists to provide patient care. Completed consults increased from 41% to 56%, and patient-pharmacist encounters increased from 240 to 290 per month. The technician, acting as a clinical pharmacist extender, also completed an average of 90 patient encounters independently each month. As a result of these improvements, the decision was made to hire a second technician. Currently, the technicians spend 28-40 hours per week on clinical activities, offsetting an average of 26 hours per week for the clinical pharmacists. A patient-centered medical home clinical pharmacy technician can reduce the administrative workload for clinical pharmacists, improve their efficiency, and enhance the use of clinical pharmacy services. Several characteristics, particularly medication knowledge, make pharmacy technicians particularly suited for this role. The results from the implementation of a clinical pharmacy technician at this military treatment facility resulted in an Army-wide expansion of the position and suggested applicability in other practice sites, particularly in federal pharmacies. Published by Elsevier Inc.

Computer-Integrated Manufacturing Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Lakeland Tech Prep Consortium, Kirtland, OH.

This tech prep competency profile for computer-integrated manufacturing technology begins with definitions for four occupations: manufacturing technician, quality technician, mechanical engineering technician, and computer-assisted design/drafting (CADD) technician. A chart lists competencies by unit and indicates whether entire or partial unit is…

Forest Technician. 2+2 Articulated Curriculum in Agricultural Technology.

ERIC Educational Resources Information Center

York, Walter

This 2+2 articulated curriculum for the occupation of forest technician includes the following: program results and benefits; job description--forest technician; curriculum objective; duty and task listings for forest technician; recommended secondary and postsecondary course options flowchart; recommended student prerequisites; basic outlines for…

46 CFR 160.151-39 - Training of servicing technicians.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false Training of servicing technicians. 160.151-39 Section...-39 Training of servicing technicians. (a) The training program for certification of servicing technicians must include— (1) Training and practice in packing an inflatable liferaft, repairing buoyancy...

5 CFR 841.708 - Special provisions affecting retired military reserve technicians.

Code of Federal Regulations, 2010 CFR

2010-01-01

... military reserve technicians. 841.708 Section 841.708 Administrative Personnel OFFICE OF PERSONNEL... ADMINISTRATION Cost-of-Living Adjustments § 841.708 Special provisions affecting retired military reserve technicians. (a) Military reserve technicians who retire as a result of a medical disability are excepted from...

5 CFR 842.210 - Military reserve technicians.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Military reserve technicians. 842.210... REGULATIONS (CONTINUED) FEDERAL EMPLOYEES RETIREMENT SYSTEM-BASIC ANNUITY Eligibility § 842.210 Military reserve technicians. (a) A military reserve technician as defined in 5 U.S.C. 8401(30) who is separated...

Creating a performance appraisal template for pharmacy technicians using the method of equal-appearing intervals.

PubMed

Desselle, Shane P; Vaughan, Melissa; Faria, Thomas

2002-01-01

To design a highly quantitative template for the evaluation of community pharmacy technicians' job performance that enables managers to provide sufficient feedback and fairly allocate organizational rewards. Two rounds of interviews with two convenience samples of community pharmacists and pharmacy technicians were conducted. The interview in phase 1 was qualitative, and responses were used to design the second interview protocol. During the phase 2 interviews, a new group of respondents ranked technicians' job responsibilities, identified through the initial interviewees' responses, using scales the researchers had designed using an interval-level scaling technique called equal-appearing intervals. Chain and independent pharmacies. Phase 1-20 pharmacists and 20 technicians from chain and independent pharmacies; phase 2-20 pharmacists and 9 technicians from chain and independent pharmacies. Ratings of the importance of technician practice functions and corresponding responsibilities. Weights were calculated for each practice function. A weighted list of practice functions was developed, and this may serve as a performance evaluation template. Customer service-related activities were judged by pharmacists and technicians alike to be the most important technician functions. Many pharmacies either lack formal performance appraisal systems or fail to implement them properly. Technicians may desire more consistent feedback from pharmacists and value information that may lead to organizational rewards. Using a weighted, behaviorally anchored performance appraisal system may help pharmacists and pharmacy managers meet these demands.

Biological rhythms and rotating shift work : some considerations for air traffic controllers and managers.

DOT National Transportation Integrated Search

1986-01-01

This report is a general review of some of the current themes and practices regarding rotating shift work; to inform air traffic controllers, technicians, and managers of these issues; and to offer some ideas that may be helpful in dealing with diffi...

Instrumentation and Control. Energy Technology Series.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This course in instrumentation and controls is one of 16 courses in the Energy Technology Series developed for an Energy Conservation-and-Use Technology curriculum. Intended for use in two-year postsecondary technical institutions to prepare technicians for employment, the courses are also useful in industry for updating employees in…

[Proposed recommendations for the practical use of internal quality controls (IQC) in a medical biology laboratory].

PubMed

Giannoli, Jean-Marc; Szymanowicz, Anton

2011-01-01

We propose a set of recommendations and practices to optimize the use of quality control of medical biology examinations. The fundamentals are reviewed: definition of a series of analysis, IQC at one or more level, Westgard alert rules and rejection, practical remedial actions to take for the technician, corrective and preventive actions to be implemented by the biologist. We have also formalized three flowcharts to guide the technician in their daily practice to ensure analytical quality of investigations carried out. These decision trees are the result of the experience submitted by an accredited and professional laboratory attentive to the ongoing improvement of IQC. This article can provide useful assistance to biologists for accreditation but also aims to foster collaboration reliable medical biology laboratory at the appropriate management of patients.

Automated Guided Vehicle For Phsically Handicapped People - A Cost Effective Approach

NASA Astrophysics Data System (ADS)

Kumar, G. Arun, Dr.; Sivasubramaniam, Mr. A.

2017-12-01

Automated Guided vehicle (AGV) is like a robot that can deliver the materials from the supply area to the technician automatically. This is faster and more efficient. The robot can be accessed wirelessly. A technician can directly control the robot to deliver the components rather than control it via a human operator (over phone, computer etc. who has to program the robot or ask a delivery person to make the delivery). The vehicle is automatically guided through its ways. To avoid collisions a proximity sensor is attached to the system. The sensor senses the signals of the obstacles and can stop the vehicle in the presence of obstacles. Thus vehicle can avoid accidents that can be very useful to the present industrial trend and material handling and equipment handling will be automated and easy time saving methodology.

Data Processing Technician 3 and 2: Revised 1973.

ERIC Educational Resources Information Center

Naval Training Publications Detachment, Washington, DC.

The training manual is designed to train naval personnel in the professional aspects of their rating as Data Processing (DP) Technician and is a direct help to meeting the occupational qualifications for advancement to Data Processing Technician Third Class and Data Processing Technician Second Class. Personnel of the Data Processing Technician…

Criteria for Technician Education. A Suggested Guide.

ERIC Educational Resources Information Center

Office of Education (DHEW), Washington, DC.

This publication discusses criteria for post-secondary education of technicians as illustrated by the accumulated experience of successful programs which have had their graduates sought after by employees. Chapter headings are (1) Technicians: Who They Are and What They Do, (2) Administration of Programs to Educate Technicians, (3) Physical…

You're a What?: Tower Technician

ERIC Educational Resources Information Center

Vilorio, Dennis

2012-01-01

In this article, the author talks about the role and functions of a tower technician. A tower technician climbs up the face of telecommunications towers to remove, install, test, maintain, and repair a variety of equipment--from antennas to light bulbs. Tower technicians also build shelters and radiofrequency shields for electronic equipment, lay…

7 CFR 800.171 - Who may be licensed or authorized.

Code of Federal Regulations, 2010 CFR

2010-01-01

... individual is to be licensed. (d) Competency determinations—(1) Agency samplers and technicians. The competency of an applicant for a license as a sampler, inspection technician, or weighing technician shall be..., contract samplers, and technicians. The competency of an applicant for a license as an inspector or weigher...

46 CFR 160.151-41 - Approval of servicing facilities.

Code of Federal Regulations, 2010 CFR

2010-10-01

... of the facility; (2) The name(s) of its competent servicing technician(s); (3) Identification of the... section. A currently trained servicing technician shall successfully demonstrate the complete service to... a Coast Guard inspector or of a third-party inspector accepted by the OCMI, or such technician shall...

National Apprenticeship and Training Standards for Optical Technician (Contact Lens Technician). Revised.

ERIC Educational Resources Information Center

Employment and Training Administration (DOL), Washington, DC. Bureau of Apprenticeship and Training.

These national standards are intended to serve as a guide for the establishment of thorough and complete apprenticeship programs to produce trained optical technicians (contact lens technicians). Covered in the individual sections are the following topics: definitions, qualifications for apprenticeship, credit for previous experience, continuity…

NE TARDIS Banner Event

NASA Image and Video Library

2017-12-08

Inside the Prototype Development Laboratory at NASA's Kennedy Space Center in Florida, engineers and technicians hold a banner marking the successful delivery of a liquid oxygen test tank called Tardis. From left, are Todd Steinrock, chief, Fabrication and Development Branch, Prototype Development Lab; David McLaughlin, electrical engineering technician; Phil Stroda, mechanical engineering technician; Perry Dickey, lead electrical engineering technician; and Harold McAmis, lead mechanical engineering technician. Engineers and technicians worked together to develop the tank and build it at the lab to support cryogenic testing at Johnson Space Center's White Sands Test Facility in Las Cruces, New Mexico. The 12-foot-tall, 3,810-pound aluminum tank will be shipped to White Sands for testing.

Radiological Control Center (RADCC) Renaming Ceremony

NASA Image and Video Library

2017-03-31

A Mars Science Laboratory cap is displayed in the Randall E. Scott Radiological Control Center at NASA's Kennedy Space Center. The facility was recently named in honor of Randy Scott, a professional health physicist of more than 40 years. He served as the Florida spaceport's Radiation Protection Officer for 14 years until his death June 17, 2016. Launched Nov. 26, 2011, the Mars Science Laboratory with the Curiosity lander was powered by a radioisotope thermalelectric generator. Located in the Neil Armstrong Operations and Checkout building, the Randall E. Scott Radiological Control Center is staffed by technical and radiological experts from NASA, the U.S. Department of Energy, the U.S. Air Force 45th Space Wing and the state of Florida. The group performs data collection and assessment functions supporting launch site and field data collection activities during launces involving plutonium-powered spacecraft such as the Mars Science Laboratory.

Teaching Geographic Field Methods to Cultural Resource Management Technicians

ERIC Educational Resources Information Center

Mires, Peter B.

2004-01-01

There are perhaps 10,000 technicians in the United States who work in the field known as cultural resource management (CRM). The typical field technician possesses a bachelor's degree in anthropology, geography, or a closely allied discipline. The author's experience has been that few CRM field technicians receive adequate undergraduate training…

Changes in Occupational Radiation Exposures after Incorporation of a Real-time Dosimetry System in the Interventional Radiology Suite.

PubMed

Poudel, Sashi; Weir, Lori; Dowling, Dawn; Medich, David C

2016-08-01

A statistical pilot study was retrospectively performed to analyze potential changes in occupational radiation exposures to Interventional Radiology (IR) staff at Lawrence General Hospital after implementation of the i2 Active Radiation Dosimetry System (Unfors RaySafe Inc, 6045 Cochran Road Cleveland, OH 44139-3302). In this study, the monthly OSL dosimetry records obtained during the eight-month period prior to i2 implementation were normalized to the number of procedures performed during each month and statistically compared to the normalized dosimetry records obtained for the 8-mo period after i2 implementation. The resulting statistics included calculation of the mean and standard deviation of the dose equivalences per procedure and included appropriate hypothesis tests to assess for statistically valid differences between the pre and post i2 study periods. Hypothesis testing was performed on three groups of staff present during an IR procedure: The first group included all members of the IR staff, the second group consisted of the IR radiologists, and the third group consisted of the IR technician staff. After implementing the i2 active dosimetry system, participating members of the Lawrence General IR staff had a reduction in the average dose equivalence per procedure of 43.1% ± 16.7% (p = 0.04). Similarly, Lawrence General IR radiologists had a 65.8% ± 33.6% (p=0.01) reduction while the technologists had a 45.0% ± 14.4% (p=0.03) reduction.

Coping with Work-related Traumatic Situations among Crime Scene Technicians.

PubMed

Pavšič Mrevlje, Tinkara

2016-10-01

Crime scene technicians collect evidence related to crime and are therefore exposed to many traumatic situations. The coping strategies they use are thus very important in the process of facing the psychological consequences of such work. The available literature shows that crime scene technicians are an understudied subgroup of police workers. Our study is therefore the first unfolding insights into technicians' coping strategies, post-traumatic symptomatology and somatic health, based on a sample of 64 male crime scene technicians (85% of all Slovene technicians). Crime scene technicians mainly use avoidance coping strategies. Approach strategies that are more effective in the long-term-i.e. lead to a larger buffering of the effects of traumatic stress-are more frequently used if technicians are familiar with the nature of the task, when they have time to prepare for it, and if they feel that past situations have been positively resolved. Behavioural avoidance strategies were found to be least effective when dealing with traumatic experiences and are also related to more frequent problems of physical health. Results indicate that appropriate trainings for future technicians would facilitate the use of more effective coping strategies and consequently lead to a more effective and satisfied worker. Copyright © 2014 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

Operational evaluation of rapid diagnostic testing for Ebola Virus Disease in Guinean laboratories

PubMed Central

Aho, Josephine; Franklin, Kristyn; Likofata, Jacques; Kamgang, Jean Baptiste; Keita, Sakoba; Koivogui, Lamine; Magassouba, N’Faly; Martel, Lise D.; Dahourou, Anicet George

2017-01-01

Background Rapid Diagnostic Tests (RDTs) for Ebola Virus Disease (EVD) at the point of care have the potential to increase access and acceptability of EVD testing and the speed of patient isolation and secure burials for suspect cases. A pilot program for EVD RDTs in high risk areas of Guinea was introduced in October 2015. This paper presents concordance data between EVD RDTs and PCR testing in the field as well as an assessment of the acceptability, feasibility, and quality assurance of the RDT program. Methods and findings Concordance data were compiled from laboratory surveillance databases. The operational measures of the laboratory-based EVD RDT program were evaluated at all 34 sentinel sites in Guinea through: (1) a technical questionnaire filled by the lab technicians who performed the RDTs, (2) a checklist filled by the evaluator during the site visits, and (3) direct observation of the lab technicians performing the quality control test. Acceptability of the EVD RDT was good for technicians, patients, and families although many technicians (69.8%) expressed concern for their safety while performing the test. The feasibility of the program was good based on average technician knowledge scores (6.6 out of 8) but basic infrastructure, equipment, and supplies were lacking. There was much room for improvement in quality assurance of the program. Conclusions The implementation of new diagnostics in weak laboratory systems requires general training in quality assurance, biosafety and communication with patients in addition to specific training for the new test. Corresponding capacity building in terms of basic equipment and a long-term commitment to transfer supervision and quality improvement to national public health staff are necessary for successful implementation. PMID:29190713

Operational evaluation of rapid diagnostic testing for Ebola Virus Disease in Guinean laboratories.

PubMed

VanSteelandt, Amanda; Aho, Josephine; Franklin, Kristyn; Likofata, Jacques; Kamgang, Jean Baptiste; Keita, Sakoba; Koivogui, Lamine; Magassouba, N'Faly; Martel, Lise D; Dahourou, Anicet George

2017-01-01

Rapid Diagnostic Tests (RDTs) for Ebola Virus Disease (EVD) at the point of care have the potential to increase access and acceptability of EVD testing and the speed of patient isolation and secure burials for suspect cases. A pilot program for EVD RDTs in high risk areas of Guinea was introduced in October 2015. This paper presents concordance data between EVD RDTs and PCR testing in the field as well as an assessment of the acceptability, feasibility, and quality assurance of the RDT program. Concordance data were compiled from laboratory surveillance databases. The operational measures of the laboratory-based EVD RDT program were evaluated at all 34 sentinel sites in Guinea through: (1) a technical questionnaire filled by the lab technicians who performed the RDTs, (2) a checklist filled by the evaluator during the site visits, and (3) direct observation of the lab technicians performing the quality control test. Acceptability of the EVD RDT was good for technicians, patients, and families although many technicians (69.8%) expressed concern for their safety while performing the test. The feasibility of the program was good based on average technician knowledge scores (6.6 out of 8) but basic infrastructure, equipment, and supplies were lacking. There was much room for improvement in quality assurance of the program. The implementation of new diagnostics in weak laboratory systems requires general training in quality assurance, biosafety and communication with patients in addition to specific training for the new test. Corresponding capacity building in terms of basic equipment and a long-term commitment to transfer supervision and quality improvement to national public health staff are necessary for successful implementation.

Pharmacovigilance and adverse drug reaction reporting: a perspective of community pharmacists and pharmacy technicians in Sana'a, Yemen.

PubMed

Al-Worafi, Yaser Mohammed; Kassab, Yaman Walid; Alseragi, Wafa Mohammed; Almutairi, Masaad Saeed; Ahmed, Ali; Ming, Long Chiau; Alkhoshaiban, Ali Saleh; Hadi, Muhammad Abdul

2017-01-01

The aim of this study was to compare the knowledge, attitude and barriers of pharmacy technicians and pharmacists toward pharmacovigilance, adverse drug reactions (ADRs) and ADR reporting in community pharmacies in Yemen. This cross-sectional survey was conducted among community pharmacists and pharmacy technicians in the capital of Yemen, Sana'a. A total of 289 community pharmacies were randomly selected. The validated and pilot-tested questionnaire consisted of six sections: demographic data, knowledge about pharmacovigilance, experience with ADR reporting, attitudes toward ADR reporting, and the facilitators to improve ADR reporting. A total of 428 pharmacy technicians and pharmacists were contacted and 179 went on to complete a questionnaire (response rate: 41.8%). Of the 179 respondents, 21 (11.7%) were pharmacists and 158 (88.3%) were pharmacy technicians, of which, 176 (98.3%) were male and 3 (1.7%) were female. The mean age of the respondents was 25.87±2.63 years. There was a significant difference between the pharmacists and pharmacy technicians in terms of knowledge scores ( P <0.05). The mean knowledge scores for pharmacists was 3.33±2.852 compared to 0.15±0.666 for pharmacy technicians. With regard to attitudes toward ADR reporting, all pharmacists (100%) showed a positive attitude, while only 43% of pharmacy technicians showed a positive attitude. Pharmacists have a significantly better knowledge than pharmacy technicians with regard to pharmacovigilance. More than half of pharmacy technicians showed a negative attitude toward ADR reporting. Therefore, educational interventions and training is very important for community pharmacists and pharmacy technicians in Yemen to increase their awareness and participation in ADR reporting.

Pharmacovigilance and adverse drug reaction reporting: a perspective of community pharmacists and pharmacy technicians in Sana’a, Yemen

PubMed Central

Al-Worafi, Yaser Mohammed; Kassab, Yaman Walid; Alseragi, Wafa Mohammed; Almutairi, Masaad Saeed; Ahmed, Ali; Ming, Long Chiau; Alkhoshaiban, Ali Saleh; Hadi, Muhammad Abdul

2017-01-01

Objective The aim of this study was to compare the knowledge, attitude and barriers of pharmacy technicians and pharmacists toward pharmacovigilance, adverse drug reactions (ADRs) and ADR reporting in community pharmacies in Yemen. Methods This cross-sectional survey was conducted among community pharmacists and pharmacy technicians in the capital of Yemen, Sana’a. A total of 289 community pharmacies were randomly selected. The validated and pilot-tested questionnaire consisted of six sections: demographic data, knowledge about pharmacovigilance, experience with ADR reporting, attitudes toward ADR reporting, and the facilitators to improve ADR reporting. Results A total of 428 pharmacy technicians and pharmacists were contacted and 179 went on to complete a questionnaire (response rate: 41.8%). Of the 179 respondents, 21 (11.7%) were pharmacists and 158 (88.3%) were pharmacy technicians, of which, 176 (98.3%) were male and 3 (1.7%) were female. The mean age of the respondents was 25.87±2.63 years. There was a significant difference between the pharmacists and pharmacy technicians in terms of knowledge scores (P<0.05). The mean knowledge scores for pharmacists was 3.33±2.852 compared to 0.15±0.666 for pharmacy technicians. With regard to attitudes toward ADR reporting, all pharmacists (100%) showed a positive attitude, while only 43% of pharmacy technicians showed a positive attitude. Conclusion Pharmacists have a significantly better knowledge than pharmacy technicians with regard to pharmacovigilance. More than half of pharmacy technicians showed a negative attitude toward ADR reporting. Therefore, educational interventions and training is very important for community pharmacists and pharmacy technicians in Yemen to increase their awareness and participation in ADR reporting. PMID:28924350

Best possible medication history for hemodialysis patients obtained by a pharmacy technician.

PubMed

Leung, Marianna; Jung, Joanne; Lau, Wynnie; Kiaii, Mercedeh; Jung, Beverly

2009-09-01

Outpatients undergoing hemodialysis are at high risk for adverse drug events. Limited resources make it challenging for pharmacists to routinely obtain a best possible medication history (BPMH). The primary objective was to determine whether, for patients undergoing hemodialysis, a pharmacy technician has the skills to obtain a BPMH that would allow a pharmacist to identify drug-related problems. The secondary objectives were to determine the number and types of medication discrepancies and drug-related problems identified and the time required by the technician to complete the BPMH. All patients treated in the hemodialysis unit during the study period were included, except for those who required an interpreter or were unable to participate in an in-person interview. A single technician was taught how to interview patients according to a structured format. For each patient, the technician's BMPH was verified by a pharmacist. The agreement rate between technician and pharmacists was determined, along with the number and types of discrepancies and drug-related problems identified. The technician interviewed 99 patients. Of the 1334 medication orders reviewed, the technician and pharmacists agreed on all but 15 (agreement rate 98.9%). A total of 358 medication discrepancies were noted for 93 patients (3.8 discrepancies per patient). Of these, 210 (59%) were undocumented intentional discrepancies, and 148 (41%) were unintentional discrepancies (most commonly errors of commission). Of the 135 drug-related problems identified, the majority involved dosing problems or nonadherence. The technician required an average of 17 min for each interview. An adequately trained technician was capable of interviewing patients to create a BPMH. A variety of medication discrepancies and drug-related problems were identified. Generation of a BPMH by a technician is a useful approach allowing pharmacists to identify drug-related problems.

Roadside vegetation field condition study : [summary].

DOT National Transportation Integrated Search

2011-01-01

Roadside perennial grasses stabilize soils, reduce : erosion, and assist to maintain the integrity of : roadway right-of-ways and roadbeds. One way to : maintain healthy roadside grasses is to control : weed growth. Technicians with FDOTs maintena...

The essence of the Japan Radiological Society/Japanese College of Radiology Imaging Guideline.

PubMed

Yamashita, Yasuyuki; Murayama, Sadayuki; Okada, Masahiro; Watanabe, Yoshiyuki; Kataoka, Masako; Kaji, Yasushi; Imamura, Keiko; Takehara, Yasuo; Hayashi, Hiromitsu; Ohno, Kazuko; Awai, Kazuo; Hirai, Toshinori; Kojima, Kazuyuki; Sakai, Shuji; Matsunaga, Naofumi; Murakami, Takamichi; Yoshimitsu, Kengo; Gabata, Toshifumi; Matsuzaki, Kenji; Tohno, Eriko; Kawahara, Yasuhiro; Nakayama, Takeo; Monzawa, Shuichi; Takahashi, Satoru

2016-01-01

Diagnostic imaging is undoubtedly important in modern medicine, and final clinical decisions are often made based on it. Fortunately, Japan has the highest numbers of diagnostic imaging instruments, such as CT and MRI devices, and boasts easy access to them as well as a high level of diagnostic accuracy. In consequence, a very large number of imaging examinations are performed, but diagnostic instruments are installed in so many medical facilities that expert management of these examinations tends to be insufficient. Particularly, in order to avoid risks, clinicians have recently become indifferent to indications of imaging modalities and tend to rely on CT or MRI resulting in increasing the number of imaging examinations in Japan. This is a serious problem from the viewpoints of avoidance of unnecessary exposure and medical economy. Under these circumstances, the Japan Radiological Society and Japanese College of Radiology jointly initiated the preparation of new guidelines for diagnostic imaging. However, the field of diagnostic imaging is extremely wide, and it is impossible to cover all diseases. Therefore, in drafting the guidelines, we selected important diseases and focused on "showing evidence and suggestions in the form of clinical questions (CQs)" concerning clinically encountered questions and "describing routine imaging techniques presently considered to be standards to guarantee the quality of imaging examinations". In so doing, we adhered to the basic principles of assuming the readers to be "radiologists specializing in diagnostic imaging", "simultaneously respecting the global standards and attending to the situation in Japan", and "making the guidelines consistent with those of other scientific societies related to imaging". As a result, the guidelines became the largest ever, consisting of 152 CQs, nine areas of imaging techniques, and seven reviews, but no other guidelines in the world summarize problems concerning diagnostic imaging in the form of CQs. In this sense, the guidelines are considered to reflect the abilities of diagnostic radiologists in Japan. The contents of the guidelines are essential knowledge for radiologists, but we believe that they are also of use to general clinicians and clinical radiological technicians. While the number and contents of CQs are still insufficient, and while chapters such as those on imaging in children and emergency imaging need to be supplemented, the guidelines will be serially improved through future revisions. Lastly, we would like to extend our sincere thanks to the 153 members of the drafting committee who authored the guidelines, 12 committee chairpersons who coordinated their efforts, six members of the secretariat, and affiliates of related scientific societies who performed external evaluation.

Radiological Monitoring Equipment For Real-Time Quantification Of Area Contamination In Soils And Facility Decommissioning

DOE Office of Scientific and Technical Information (OSTI.GOV)

M. V. Carpenter; Jay A. Roach; John R Giles

2005-09-01

The environmental restoration industry offers several sys¬tems that perform scan-type characterization of radiologically contaminated areas. The Idaho National Laboratory (INL) has developed and deployed a suite of field systems that rapidly scan, characterize, and analyse radiological contamination in surface soils. The base system consists of a detector, such as sodium iodide (NaI) spectrometers, a global positioning system (GPS), and an integrated user-friendly computer interface. This mobile concept was initially developed to provide precertifica¬tion analyses of soils contaminated with uranium, thorium, and radium at the Fernald Closure Project, near Cincinnati, Ohio. INL has expanded the functionality of this basic system tomore » create a suite of integrated field-deployable analytical systems. Using its engineering and radiation measurement expertise, aided by computer hardware and software support, INL has streamlined the data acquisition and analysis process to provide real-time information presented on wireless screens and in the form of coverage maps immediately available to field technicians. In addition, custom software offers a user-friendly interface with user-selectable alarm levels and automated data quality monitoring functions that validate the data. This system is deployed from various platforms, depending on the nature of the survey. The deployment platforms include a small all-terrain vehicle used to survey large, relatively flat areas, a hand-pushed unit for areas where manoeuvrability is important, an excavator-mounted system used to scan pits and trenches where personnel access is restricted, and backpack- mounted systems to survey rocky shoreline features and other physical settings that preclude vehicle-based deployment. Variants of the base system include sealed proportional counters for measuring actinides (i.e., plutonium-238 and americium-241) in building demolitions, soil areas, roadbeds, and process line routes at the Miamisburg Closure Project near Dayton, Ohio. In addition, INL supports decontamination operations at the Oak Ridge National Laboratory.« less

Method and apparatus for in-cell vacuuming of radiologically contaminated materials

DOEpatents

Spadaro, Peter R.; Smith, Jay E.; Speer, Elmer L.; Cecconi, Arnold L.

1987-01-01

A vacuum air flow operated cyclone separator arrangement for collecting, handling and packaging loose contaminated material in accordance with acceptable radiological and criticality control requirements. The vacuum air flow system includes a specially designed fail-safe prefilter installed upstream of the vacuum air flow power supply. The fail-safe prefilter provides in-cell vacuum system flow visualization and automatically reduces or shuts off the vacuum air flow in the event of an upstream prefilter failure. The system is effective for collecting and handling highly contaminated radiological waste in the form of dust, dirt, fuel element fines, metal chips and similar loose material in accordance with radiological and criticality control requirements for disposal by means of shipment and burial.

[Dentistry in Korean during the Japanese occupation].

PubMed

Shin, Jae-Eu

2004-12-01

The Japanese introduction of dentistry into Korea was for treating the Japanese residing in Korea Noda-Oji was the first Japanese dentist for Japanese people in Korea in 1893, and Narajaki doyoyo, an invited dentist was posted in the Korean headquarter of Japanese army in September, 1905. The imperialist Japan licensed the dental technicians (yipchisa) without limit and controlled them generously so they could practice dentistry freely. This measure was contrary to that in Japan. (In Japan no new dental technician was licensed.) Komori, a dental technician opened his laboratory at Chungmuro in 1902. The dental technician had outnumbered by 1920. In 1907, the first Korean dental technician Sung-Ryong Choi practiced dentistry in Jongno. The imperialist Japan made the regulations for dental technicians to set a limit to the advertisement and medical practice of dental technicians. The first Korean dentists Suk-Tae Ham was register No. 1 in the dentist license. The Kyungsung dental school was established by Nagira Dasoni for the purpose of educating some Korean people that contributed to Japanese colonization. It made progress with the help of Japan, it was was given the approval of the establishment of the professional school in January the 25th, 1929. It was intended to produce Korean dentists in the first place but became the school for Japanese students later on. The association of Chosun dentist, which had been founded by Narajaki doyoyo, was managed by Japanese dentists in favor of the colonial ruling. The Hansung Association of Dentists established in 1925 was the organization made by the necessity of the association for Koreans only. The Japanese forcefully annexed the Association of Hansung Dentists (Koreans only) to the Association of Kyungsung Dentists to avoid collective actions of Korean dentists in the name of 'Naesunilche' -- 'Japan and Korea and one'. Their invading intention was shown in the event of 'decayed tooth preventive day'. Japanese controlled the gold for dental treatment by licensing and limited the stuff for dental treatment by rationing. The association of Chosun dentists was a group organized for the academic purpose by Nagira Dasoni and etc. In October of 191, where as the association of Kyungsung dentists was constructed on the background of Nagira Dasoni. This establishment of the association of Kyungsung dentists represented a backlash against Ikuda singjo having a complete control over the association of Chosun dentists. The number of Koreans who wrote to the Chosun Dental Science Academy was 27, and they wrote 75 articles, which amounted to 15% of 486 articles. The number of Koreans who wrote to the Kyungsung Dental Science Academy was 16, and they wrote 52 articles, which amounted to 11% of 481 articles. These had been a lot of improvement by activity backlash of the dental association. However, they experimented Korean people. The experiments included the experimental stimulation of dental pain by Nagira Dasoni, use of toxic agents on human bodies such as mercury, bismuth and carcinogenic benzole, and experimental treatments with a poor prognosis. Worst of all, the rapid discrimination was stressed. The different dentition according to races was the subject of comparison researches. The dangerous chemicals were sometimes used. The non-akaloid medication was investigated to relieve the dental pain but, the habitual side effects were not unusual by the overuse of morphine or heroin, which was known to be irrelevant due to their habitual side effect. The use of new and unproven material was recommended as well. Especially, the alloy that substituted gold, attracting attention, was substantiated by researches.

Survey of occupational hazards in Minnesota veterinary practices in 2012.

PubMed

Fowler, Heather N; Holzbauer, Stacy M; Smith, Kirk E; Scheftel, Joni M

2016-01-15

To identify the scope of occupational hazards encountered by veterinary personnel and compare hazard exposures between veterinarians and technicians working in small and large animal practices. Cross-sectional survey. Licensed veterinarians and veterinary staff in Minnesota. A survey of Minnesota veterinary personnel was conducted between February 1 and December 1, 2012. Adult veterinary personnel working in clinical practice for > 12 months were eligible to participate. Information was collected on various workplace hazards as well as on workplace safety culture. 831 eligible people responded, representing approximately 10% of Minnesota veterinary personnel. A greater proportion of veterinarians (93%; 368/394) reported having received preexposure rabies vaccinations than did veterinary technicians (54%; 198/365). During their career, 226 (27%) respondents had acquired at least 1 zoonotic infection and 636 (77%) had been injured by a needle or other sharps. Recapping of needles was reported by 87% of respondents; the most common reason reported by veterinarians (41%; 142/345) and veterinary technicians (71%; 238/333) was being trained to do so at school or work. Recent feelings of depression were reported by 204 (25%) respondents. A greater proportion of technicians (42%; 155/365) than veterinarians (21%; 81/394) indicated working in an environment in which employees experienced some form of workplace abuse. Veterinary personnel in Minnesota were exposed to several work-related hazards. Practice staff should assess workplace hazards, implement controls, and incorporate instruction on occupational health into employee training.

Exposure of aircraft maintenance technicians to organophosphates from hydraulic fluids and turbine oils: a pilot study.

PubMed

Schindler, Birgit Karin; Koslitz, Stephan; Weiss, Tobias; Broding, Horst Christoph; Brüning, Thomas; Bünger, Jürgen

2014-01-01

Hydraulic fluids and turbine oils contain organophosphates like tricresyl phosphate isomers, triphenyl phosphate and tributyl phosphate from very small up to high percentages. The aim of this pilot study was to determine if aircraft maintenance technicians are exposed to relevant amounts of organophosphates. Dialkyl and diaryl phosphate metabolites of seven organophosphates were quantified in pre- and post-shift spot urine samples of technicians (N=5) by GC-MS/MS after solid phase extraction and derivatization. Pre- and post shift values of tributyl phosphate metabolites (dibutyl phosphate (DBP): median pre-shift: 12.5 μg/L, post-shift: 23.5 μg/L) and triphenyl phosphate metabolites (diphenyl phosphate (DPP): median pre-shift: 2.9 μg/L, post-shift: 3.5 μg/L) were statistically higher than in a control group from the general population (median DBP: <0.25 μg/L, median DPP: 0.5 μg/L). No tricresyl phosphate metabolites were detected. The aircraft maintenance technicians were occupationally exposed to tributyl and triphenyl phosphate but not to tricresyl phosphate, tri-(2-chloroethyl)- and tri-(2-chloropropyl)-phosphate. Further studies are necessary to collect information on sources, routes of uptake and varying exposures during different work tasks, evaluate possible health effects and to set up appropriate protective measures. Copyright © 2013 Elsevier GmbH. All rights reserved.

Outbreak of hepatitis C virus infection associated with narcotics diversion by an hepatitis C virus–infected surgical technician

PubMed Central

Warner, Amy E.; Schaefer, Melissa K.; Patel, Priti R.; Drobeniuc, Jan; Xia, Guoliang; Lin, Yulin; Khudyakov, Yury; Vonderwahl, Candace W.; Miller, Lisa; Thompson, Nicola D.

2015-01-01

Background Drug diversion by health care personnel poses a risk for serious patient harm. Public health identified 2 patients diagnosed with acute hepatitis C virus (HCV) infection who shared a common link with a hospital. Further investigation implicated a drug-diverting, HCV-infected surgical technician who was subsequently employed at an ambulatory surgical center. Methods Patients at the 2 facilities were offered testing for HCV infection if they were potentially exposed. Serum from the surgical technician and patients testing positive for HCV but without evidence of infection before their surgical procedure was further tested to determine HCV genotype and quasi-species sequences. Parenteral medication handling practices at the 2 facilities were evaluated. Results The 2 facilities notified 5970 patients of their possible exposure to HCV, 88% of whom were tested and had results reported to the state public health departments. Eighteen patients had HCV highly related to the surgical technician’s virus. The surgical technician gained unauthorized access to fentanyl owing to limitations in procedures for securing controlled substances. Conclusions Public health surveillance identified an outbreak of HCV infection due to an infected health care provider engaged in diversion of injectable narcotics. The investigation highlights the value of public health surveillance in identifying HCV outbreaks and uncovering a method of drug diversion and its impacts on patients. PMID:25442395

Radiological Control Center (RADCC) Renaming Ceremony

NASA Image and Video Library

2017-03-31

Family members of Randy Scott gather in the Radiological Control Center at NASA's Kennedy Space Center following ceremonies to name the facility in his honor. A professional health physicist of more than 40 years, Scott served as the Florida spaceport's Radiation Protection Officer for 14 years until his death June 17, 2016.

The Education and Training of Marine Technicians.

ERIC Educational Resources Information Center

Chan, Gordon L.

This report includes a study of the need for marine technicians in California, implications for the national scene, and observations made at a national conference held in Florida in 1968. Problems treated are: (1) definition of a marine technician, (2) how marine technicians should be classified, (3) how great is the demand for them, (4) the type…

DataHawk Flocks: Self-Contained sUAS Modules for High-Resolution Atmospheric Measurements

DTIC Science & Technology

2015-08-25

Gabriel LoDolce (sr. technician) 0.38 Emily Ranquist (jr. technician) 0.20 Gabriel Chapel (jr. technician) 0.04 Russel Temple (jr. technician) 0.04...processor board, including 3 SPI, 3 I2C, 1 CAN, 6 UART, 8 analog, and 1 digital camera interface. 2.2 Flexibility in changing peripherals: The

20 CFR 1002.306 - Is a National Guard civilian technician considered a State or Federal employee for purposes of...

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Is a National Guard civilian technician... a National Guard civilian technician considered a State or Federal employee for purposes of USERRA? A National Guard civilian technician is considered a State employee for USERRA purposes, although he...

5 CFR 831.306 - Service as a National Guard technician before January 1, 1969.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Service as a National Guard technician... National Guard technician before January 1, 1969. (a) Definitions. In this section—(1) Service as a National Guard technician is service performed under section 709 of title 32, United States Code (or under...

Best Manufacturing Practices Survey Conducted at Motorola, Incorporated Government Electronics Group Scottsdale, Arizona

DTIC Science & Technology

1988-03-01

operators recommendations, certain select individuals are trained and used as SPC technicians. " POKA - YOKE " or mistake proofing from Shiegeo Shingo’s "Zero...Quality Control: Source Inspection and the POKA - YOKE System" has been locally applied to operators processes with great success. This pre-control

Evaluation of risk and protective factors for work-related bite injuries to veterinary technicians certified in Minnesota.

PubMed

Nordgren, Leslie D; Gerberich, Susan G; Alexander, Bruce H; Church, Timothy R; Bender, Jeff B; Ryan, Andrew D

2014-08-15

To identify risk and protective factors for work-related bite injuries among veterinary technicians certified in Minnesota. Nested case-control study. 868 certified veterinary technicians (CVTs). A questionnaire was mailed to CVTs who previously participated in a survey regarding work-related injuries and did (cases; 301 surveys sent) or did not (controls; 567) report qualifying work-related animal bite injuries in the preceding 12 months. Descriptive statistics were summarized. Demographic and work-related variables for the month preceding the bite injury (for cases) or a randomly selected month (controls) were assessed with univariate analysis (489 CVTs) and multivariate analysis of a subset of 337 CVTs who worked in small or mixed mostly small animal facilities. Responses were received from 176 case and 313 control CVTs. For the subset of 337 CVTs, risk of bite injury was higher for those < 25 years of age (OR, 3.82; 95% confidence interval [CI], 1.84 to 7.94) than for those ≥ 35 years of age, for those who had worked < 5 years (OR, 3.24; 95% CI, 1.63 to 6.45) versus ≥ 10 years in any veterinary facility, and for those who handled ≥ 5 species/d (OR, 1.99; 95% CI, 1.06 to 3.74) versus < 3 species/d. Risk was lower for CVTs who handled < 10 versus ≥ 20 animals/d (OR, 0.23; 95% CI, 0.08 to 0.71). Several work-related factors were associated with the risk of work-related bite injury to CVTs. These findings may serve as a basis for development of intervention efforts and future research regarding work-related injuries among veterinary staff.

Defining the Simulation Technician Role: Results of a Survey-Based Study.

PubMed

Bailey, Rachel; Taylor, Regina G; FitzGerald, Michael R; Kerrey, Benjamin T; LeMaster, Thomas; Geis, Gary L

2015-10-01

In health care simulation, simulation technicians perform multiple tasks to support various educational offerings. Technician responsibilities and the tasks that accompany them seem to vary between centers. The objectives were to identify the range and frequency of tasks that technicians perform and to determine if there is a correspondence between what technicians do and what they feel their responsibilities should be. We hypothesized that there is a core set of responsibilities and tasks for the technician position regardless of background, experience, and type of simulation center. We conducted a prospective, survey-based study of individuals currently functioning in a simulation technician role in a simulation center. This survey was designed internally and piloted within 3 academic simulation centers. Potential respondents were identified through a national mailing list, and the survey was distributed electronically during a 3-week period. A survey request was sent to 280 potential participants, 136 (49%) responded, and 73 met inclusion criteria. Five core tasks were identified as follows: equipment setup and breakdown, programming scenarios into software, operation of software during simulation, audiovisual support for courses, and on-site simulator maintenance. Independent of background before they were hired, technicians felt unprepared for their role once taking the position. Formal training was identified as a need; however, the majority of technicians felt experience over time was the main contributor toward developing knowledge and skills within their role. This study represents a first step in defining the technician role within simulation-based education and supports the need for the development of a formal job description to allow recruitment, development, and certification.

Expanded Roles for Pharmacy Technicians in the Medication Reconciliation Process: A Qualitative Review

PubMed Central

Ham, YoungYoon; Gerrity, Theresa M.

2017-01-01

Background: Collection of a complete and accurate medication history is an essential component of the medication reconciliation process. The role of pharmacy technicians in supporting medication reconciliation has been the subject of recent interest. Purpose: The purpose of this article is to review the existing literature on pharmacy technician involvement in the medication reconciliation process and to summarize outcomes on the quality and accuracy of pharmacy technician–collected medication histories. Method: A literature review was conducted using MEDLINE and Academic Search Premier (1948 – April 2015). Results: Sixteen papers were identified, with 12 containing a formal evaluation of outcomes. Three were purely descriptive, and 9 compared the pharmacy technician's performance to pharmacists, nurses, physicians, and/or interdisciplinary teams. Studies used a variety of endpoints, but they demonstrated similar or improved outcomes by engaging pharmacy technicians. Evidence demonstrates that trained pharmacy technicians are able to gather medication histories with similar completeness and accuracy to other health care professionals. Conclusion: The use of pharmacy technicians may be a viable strategy for developing and expanding medication reconciliation processes with appropriate supervision. Future efforts should focus on evaluating the impact of expanded roles for pharmacy technicians in the health care system; assessing the need for standardization of pharmacy technician education, training, and certification; and obtaining clarification from state pharmacy boards regarding these expanded roles. PMID:28179740

Simulation For Task Practice in Technical Training.

ERIC Educational Resources Information Center

Mallory, W. J.

1981-01-01

Describes two programs used by the Ford Motor Company to train manufacturing skilled trades personnel. Programmable Controller Maintenance Training Program for Industrial Technicians and Troubleshooting Strategy Program use simulation and provide improved task performance after training. (JOW)

Technicism, Teachers and Teaching Quality in Vocational Education and Training.

ERIC Educational Resources Information Center

Hodkinson, Phil

1998-01-01

Post-Fordist notions of people as the most important organizational resource are congruent with teacher professionalism. However, government vocational education policies are dominated by technical rationalism, which treats teachers as technicians to be controlled. (SK)

Exploring Current and Future Roles of Non-Dental Professionals: Implications for Dental Hygiene Education.

PubMed

Maxey, Hannah L; Farrell, Christine; Gwozdek, Anne

2017-09-01

The health care system is undergoing transformation in which oral health is not only valued as an aspect of overall health, but health care delivery systems are aligning to better deliver total patient care. As a result of this transformation, education for many non-dental professionals incorporates oral health content to prepare them to practice in comprehensive delivery models. While some non-dental professionals already incorporate oral health care in their service, many opportunities exist for expansion of oral health care delivery by other non-dental professionals, including radiologic technicians, nursing staff, and human services professionals. As non-dental professionals take on expanded roles in oral health care, the dental hygiene workforce must be prepared to practice in settings with new types of professionals. Dental hygiene curricula should prioritize interprofessional education to best prepare these students for practice in evolved delivery models. This article was written as part of the project "Advancing Dental Education in the 21 st Century."

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, technicians on the floor watch as a tray is extended from inside the Pressurized Module, or PM, part of the Japanese Experiment Module (JEM). The PM provides a shirt-sleeve environment in which astronauts on the International Space Station can conduct microgravity experiments. There are a total of 23 racks, including 10 experiment racks, inside the PM providing a power supply, communications, air conditioning, hardware cooling, water control and experiment support functions.

NASA Image and Video Library

2003-09-24

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, technicians on the floor watch as a tray is extended from inside the Pressurized Module, or PM, part of the Japanese Experiment Module (JEM). The PM provides a shirt-sleeve environment in which astronauts on the International Space Station can conduct microgravity experiments. There are a total of 23 racks, including 10 experiment racks, inside the PM providing a power supply, communications, air conditioning, hardware cooling, water control and experiment support functions.

14 CFR 147.17 - Instructional equipment requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... (CONTINUED) SCHOOLS AND OTHER CERTIFICATED AGENCIES AVIATION MAINTENANCE TECHNICIAN SCHOOLS Certification... maintenance technician might be required to work and with which the technician should be familiar. (b) The...

Computer Aided Drafting and Design, Industrial Manufacturing Technician, and Mechanical Engineering Technician and Machine Tool, Die and Moldmaking Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Mid-East Ohio Tech Prep Consortium, Zanesville.

This document contains competency profiles in four areas: computer-aided drafting and design; industrial manufacturing technician; mechanical engineering technician; and machine tool, die, and moldmaking technology occupations. The profiles are intended for use in articulating tech prep programs from high school through associate degrees in Ohio.…

Switch Box For Controlling Flows Of Four Gases

NASA Technical Reports Server (NTRS)

Wishard, James R.; Lamb, James L.

1995-01-01

Switch box designed for use in simultaneously controlling flows of as many as four out of total of six available gases into semiconductor-processing chamber. Contains switches, relays, logic circuitry, display devices, and other circuitry for connecting each of as many as four gas controllers to any one of as many as six available mass-flow controllers. Front panel of switch box apprises technician of statuses of flows of various gases.

Compliance with infection control practices in sputum microscopy centres: a study from Kerala, India

PubMed Central

Ubaid, N. P.; Nagaraja, S. B.; Shewade, H. D.; Padmanabhan, K. V.; Naik, B. R.; Satpati, M.; Blesson, S.; Jayasree, A. K.

2015-01-01

Background: One of the strategies of the Revised National Tuberculosis Control Programme in India to achieve tuberculosis control is by increasing case detection through a nationwide network of designated microscopy centres (DMC). Practice of standard precautions for infection control in these DMCs is very important to prevent transmission of infection not only to the laboratory personnel, but also to the general population. However, in India this has not been evaluated by an external agency. Method: A cross-sectional study was carried out to assess knowledge, facilities and compliance regarding infection control practices (ICP) in all 38 DMCs in Kannur district, Kerala, India, in 2015. Using observations and interviews, the investigators collected data in a structured format. Results: Overall knowledge about infection control was found to be satisfactory among 29% of laboratory technicians. Overall facilities for infection control were satisfactory in 61% of the DMCs, while adherence to ICP was satisfactory in 45% of the DMCs. Knowledge regarding ICP was better in government DMCs, whereas facilities for ICP and adherence to biomedical waste management guidelines were better in private DMCs. Conclusion: Given the higher risk of infection among laboratory technicians, there is an urgent need to address the shortcomings in infection control practices. PMID:26767180

Comparison of exercise blood pressure measured by technician and an automated system.

PubMed

Garcia-Gregory, J A; Jackson, A S; Studeville, J; Squires, W G; Owen, C A

1984-05-01

We evaluated the automated system Blood Pressure Measuring System (BPMS) developed by NASA on 277 adult males who elected to have a treadmill test as part of their annual physical. The BPMS uses acoustic transduction with a computer-assisted ECG gating to detect nonsynchronous noise. The BPMS readings were compared to pressures simultaneously measured by trained technicians. For all stages of work, BPMS readings were higher for systolic and lower for diastolic than technician readings. At peak stages of work, BPMS systolic pressures were about 20 mmHg higher than technician readings. Within each 3-min workstage, BPMS readings were found to be more inconsistent than technician readings. The standard errors of measurement for BPMS were from two to three times higher than technician values. These data showed automated blood pressure readings were significantly different than technician values and subject to more random fluctuations. These findings demonstrate the need to view exercise blood pressure measured by automated systems with caution.

Spirometry quality-control strategies in a multinational study of the prevalence of chronic obstructive pulmonary disease.

PubMed

Pérez-Padilla, Rogelio; Vázquez-García, Juan Carlos; Márquez, María Nelly; Menezes, Ana Maria B

2008-08-01

We report the characteristics of a centralized spirometry quality-control program developed for a population-based survey of the prevalence of chronic obstructive pulmonary disease in 5 cities: São Paulo, Brazil; México City, México; Montevideo, Uruguay; Santiago, Chile; and Caracas, Venezuela (the Latin American Project for the Investigation of Obstructive Lung Diseases [PLATINO]). We developed and used a 3-level quality-control system. Level 1: The spirometer used in the survey (EasyOne), gives quality-control messages to the user/clinician. All the spirometry technicians were trained by the same team, with the aim of meeting what became the 2005 spirometry quality criteria of the American Thoracic Society/European Respiratory Society (ATS/ERS). Level 2: In each of the 5 cities a local supervisor identified poor-quality spirometries that needed to be repeated. Level 3: Once a week during the survey, all spirometry results were sent via e-mail to the study's quality-control center in México City for review and feedback. In the overall totals at the end of the study, 94% of the 5,315 subjects had spirometries that met the 1994 ATS quality criteria, and 89% met the 2005 ATS/ERS criteria. In their overall totals at the end of the study, 90% of the 64 spirometry technicians were successful in getting 86% of their subjects to meet the 1994 ATS criteria, and got 75% of their subjects to meet the 2005 ATS/ERS criteria. In the first 10 subjects they tested, 90% of the 64 spirometry technicians were successful in getting 70% of their subjects to meet the 1994 ATS criteria, and got 60% of their subjects to meet the 2005 ATS/ERS criteria. Standardization of equipment, training, and supervision of spirometry is essential in a multinational spirometry survey. Centralized quality control can be done via e-mail with good reliability and low cost.

Development of a general-purpose, integrated knowledge capture and delivery system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberts, A.G.; Freer, E.B.

1991-01-01

KATIE (Knowledge-Based Assistant for Troubleshooting Industrial Equipment) was first conceived as a solution for maintenance problems. In the area of process control, maintenance technicians have become responsible for increasingly complicated equipment and an overwhelming amount of associated information. The sophisticated distributed control systems have proven to be such a drastic change for technicians that they are forced to rely on the engineer for troubleshooting guidance. Because it is difficult for a knowledgeable engineer to be readily available for troubleshooting,maintenance personnel wish to capture the information provided by the engineer. The solution provided has two stages. First, a specific complicated systemmore » was chosen as a test case. An effort was made to gather all available system information in some form. Second, a method of capturing and delivering this collection of information was developed. Several features were desired for this knowledge capture/delivery system (KATIE). Creation of the knowledge base needed to be independent of the delivery system. The delivery path need to be as simple as possible for the technician, and the capture, or authoring, system could provide very sophisticated features. It was decided that KATIE should be as general as possible, not internalizing specifics about the first implementation. The knowledge bases created needed to be completely separate from KATIE needed to have a modular structure so that each type of information (rules, procedures, manuals, symptoms) could be encapsulated individually.« less

Radiological Control Center (RADCC) Renaming Ceremony

NASA Image and Video Library

2017-03-31

Nancy Bray, director of Spaceport Integration and Services at NASA's Kennedy Space Center, speaks during ceremonies to name the Radiological Control Center in honor for Randy Scott. A professional health physicist of more than 40 years, Scott served as the Florida spaceport's Radiation Protection Officer for 14 years until his death June 17, 2016.

Utility of simultaneous interventional radiology and operative surgery in a dedicated suite for seriously injured patients.

PubMed

D'Amours, Scott K; Rastogi, Pratik; Ball, Chad G

2013-12-01

In recent years, combined interventional radiology and operative suites have been proposed and are now becoming operational in select trauma centres. Given the infancy of this technology, this review aims to review the rationale, benefits and challenges of hybrid suites in the management of seriously injured patients. No specific studies exist that investigate outcomes within hybrid trauma suites. Endovascular and interventional radiology techniques have been successfully employed in thoracic, abdominal, pelvic and extremity trauma. Although the association between delayed haemorrhage control and poorer patient outcomes is intuitive, most supporting scientific data are outdated. The hybrid suite model offers the potential to expedite haemorrhage control through synergistic operative, interventional radiology and resuscitative platforms. Maximizing the utility of these suites requires trained multidisciplinary teams, ergonomic and workplace considerations, as well as a fundamental paradigm shift of trauma care. This often translates into a more damage-control orientated philosophy. Hybrid suites offer tremendous potential to expedite haemorrhage control in trauma patients. Outcome evaluations from trauma units that currently have operational hybrid suites are required to establish clearer guidelines and criteria for patient management.

Summary of the National Technicians' Conference ASE/NSLC York--5/6th July 2012

ERIC Educational Resources Information Center

Bostock, Julia, Comp.

2012-01-01

This article presents a summary of the National Technicians' Conference ASE/NSLC York from July 5th to July 6th 2012. Approximately 160 technicians attended the Conference on both days. The programme included workshops and lectures and was repeated on the Friday, so that technicians who stayed for both days were able to take part in a variety of…

Advancing the role of the pharmacy technician: A systematic review.

PubMed

Mattingly, Ashlee N; Mattingly, T Joseph

To summarize the findings of a literature search on advancing the role of pharmacy technicians, including the types of training identified and the potential costs and benefits to both the technician and the pharmacy. A literature search of Scopus, Embase, and Medline was conducted on January 11, 2017. Original research, research reports, case studies, or association reports were included for review. Articles were considered to be relevant based on identification of an advanced pharmacy technician role or addressing additional training/education for technician functions. A standard data extraction form was used to collect study authors, article title, year published, journal title, study design, brief description of methods, primary outcome measures, advanced technician roles identified, additional education or training addressed, and additional costs and benefits identified in each article. A total of 33 articles were included for full review and data extraction. Study design varied, with 17 (52%) quantitative, 1 (3%) qualitative, 5 (15%) mixed-method, and 10 (30%) case study designs. Seventeen (52%) of the studies included were published after 2006. The mechanism of training was primarily through supervised on-the-job training, allowing technicians to assume administrative-based positions that facilitated a pharmacist-led clinical service, with either the pharmacist or the pharmacy receiving the greatest benefits. Although the literature supports technicians performing advanced roles in the pharmacy, resulting in either improved patient outcomes or opportunities for pharmacists to engage in additional clinical services, the benefits to the technician were primarily indirect, such as an increase in job satisfaction or a more desirable work schedule. If a technician is to take on additional roles that require completion of a formalized training or educational program, benefits that are more tangible may help to inspire technicians to pursue these roles. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Pharmacy technician self-efficacies: Insight to aid future education, staff development, and workforce planning.

PubMed

Desselle, Shane P; Hoh, Ryan; Holmes, Erin R; Gill, Amanpreet; Zamora, Lemuel

2017-07-15

The roles of pharmacy technicians are increasingly prominent given pharmacy's transition to patient-centered activities and evolving scopes of practice in many U.S. states and throughout the world. The aims of this study were to assess U.S. pharmacy technicians' self-efficacies for and attitudes toward performing current and emerging roles in hospital and in community pharmacy and to identify factors related to pharmacy technician self-efficacies in these roles. A total of 5000 pharmacy technicians from 8 U.S. states were sent an electronic survey eliciting data on current involvement, self-efficacies, and attitudes for practicing in an expansive list of practice activities. The 8 states from which the sample was drawn were selected from a stratified randomized procedure using U.S. Census Bureau geographically defined regions. Pre-notification and response reminders were employed. Data were analyzed descriptively and with univariate, inferential tests, as appropriate, to determine associations with commitment, practice environment, experience level, and other variables. Of the 612 participants who responded, 494 were currently working as a technician and not enrolled in a PharmD program of study. Participants reported various activities in which they were highly engaged. Overall, attitudes toward performing most of the activities and self-efficacies were quite favorable, even for those activities in which technicians were currently less involved. There were some notable differences between technicians practicing in community versus hospital settings. Years of experience, profession commitment, and advanced employee ranking were associated with higher levels of self-efficacy, overall. This initial examination of pharmacy technician self-efficacies identified areas that along with other factors could help employers with further expanding technician practice activities and vocational institutions with considerations for education and development of these key members of the workforce. The results would suggest technicians to be ready for continued evolution in their practice. Copyright © 2017 Elsevier Inc. All rights reserved.

Use of a pharmacy technician to facilitate postfracture care provided by clinical pharmacy specialists.

PubMed

Irwin, Adriane N; Heilmann, Rachel M F; Gerrity, Theresa M; Kroner, Beverly A; Olson, Kari L

2014-12-01

The ability of a pharmacy technician to support the patient screening and documentation-related functions of a pharmacist-driven osteoporosis management service was evaluated. A two-phase prospective study was conducted within a large integrated health system to assess a pharmacy technician's performance in supporting a multisite team of clinical pharmacy specialists providing postfracture care. In phase I of the study, a specially trained pharmacy technician provided support to pharmacists at five participating medical offices, helping to identify patients requiring pharmacist intervention and, when applicable, collecting patient-specific clinical information from the electronic health record. In phase II of the study, the amount of pharmacist time saved through the use of technician support versus usual care was evaluated. The records of 127 patient cases were reviewed by the pharmacy technician during phase I of the study, and a pharmacist agreed with the technician's determination of the need for intervention in the majority of instances (92.9%). An additional 91 patient cases were reviewed by the technician in phase II of the research. With technician support, pharmacists spent less time reviewing cases subsequently determined as not requiring intervention (mean ± S.D., 5.0 ± 3.8 minutes per case compared with 5.2 ± 4.5 minutes under the usual care model; p = 0.78). In cases requiring intervention, technician support was associated with a reduction in the average pharmacist time spent on care plan development (13.5 ± 7.1 minutes versus 18.2 ± 16.6 minutes with usual care, p = 0.34). The study results suggest that a pharmacy technician can accurately determine if a patient is a candidate for pharmacist intervention and collect clinical information to facilitate care plan development. Copyright © 2014 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Metabolic syndrome and occupation: Any association? Prevalence among auto technicians and school teachers in South West Nigeria.

PubMed

Akintunde, Adeseye A; Oloyede, Taiwo W

2017-11-01

To determine occupational association with metabolic syndrome among auto technicians and school teachers. One hundred and sixty six subjects were selected for this study. Clinical data was obtained while laboratory investigations including plasma glucose and lipid profile were performed. Statistical analysis was done with SPSS 20.0. P<0.05 was taken as statistically significant. School teachers had significantly higher mean total cholesterol and LDL-cholesterol compared to auto technicians. Mean serum triglycerides was significantly higher among auto-technicians compared to school teachers in this study. The prevalence of some conventional cardiovascular risk factors was significantly higher among auto-technicians compared to school teachers: Impaired blood glucose (9.6% vs. 1.2%, p<0.05), hypertriglyceridaemia (18.1% vs. 7.2%, p<0.05) and low HDL-Cholesterol (47.0% vs. 37.3%, p<0.05) respectively. However elevated LDL-cholesterol (56.6% vs. 32.5%, p<0.05) was significantly more common among school teachers compared to auto-technicians. Based on the WHO and the Harmonized criteria, metabolic syndrome was more frequent among auto-technicians compared to school teachers. (8.4% vs. 1.2% and 19.3% vs. 7.2% respectively, p<0.05) CONCLUSION: The prevalence of metabolic syndrome appears to be significantly higher among auto technicians despite their high level of physical activity, exertion and education compared to teachers. This may be related to the increased occupational exposure to organic and inorganic materials from dust particles, oil and oil related matter and particulate matter among auto technicians. Prompt definitive evaluation of this concept and appropriate health education to encourage safety mechanism can reduce this burden of metabolic syndrome among auto technicians in Nigeria. Copyright © 2016 Diabetes India. Published by Elsevier Ltd. All rights reserved.

Enactment of mandatory pharmacy technician certification in Kansas.

PubMed

Lucas, Amber; Massey, Lindsay; Gill, Taylor; Burger, Gregory; Little, Jeff D

2016-02-01

The successful enactment of mandatory pharmacy technician certification in Kansas is described. In 2004, Kansas began requiring registration of all pharmacy technicians with the state board of pharmacy. Registration identified individuals working as pharmacy technicians but did not require any specific education or certification. In September 2012, the Kansas Board of Pharmacy created a task force of key stakeholders including pharmacists from multiple areas of practice, the University of Kansas School of Pharmacy, organizational leaders from the Kansas Council of Health-System Pharmacists (KCHP) and Kansas Pharmacists Association, and professional lobbyists. The goals of this task force were to research practices of technician certification in other states and to make recommendations to the state board of pharmacy on how Kansas could accomplish mandatory technician certification. The task force outlined the steps needed to achieve legislation that could be supported by the members. These topics included the creation of a technician trainee category, grandfathering certain technicians who had been practicing for a designated period of time, state board-approved exemptions, training requirements, age and education requirements, continuing-education requirements, and pharmacist:technician ratio. The recommendations were finalized at the August 2013 Kansas Pharmacy Summit, and the proposed legislation was introduced and passed during the 2014 legislative session. KCHP members learned many valuable lessons about advocacy and the legislative process with this initiative, including building relationships, working with legislators, and working with other professional organizations. The formation of a task force led to the successful passage of a bill granting the Kansas Board of Pharmacy the authority to issue regulations regarding mandatory pharmacy technician certification. Copyright © 2016 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Best Possible Medication History for Hemodialysis Patients Obtained by a Pharmacy Technician

PubMed Central

Leung, Marianna; Jung, Joanne; Lau, Wynnie; Kiaii, Mercedeh; Jung, Beverly

2009-01-01

Background: Outpatients undergoing hemodialysis are at high risk for adverse drug events. Limited resources make it challenging for pharmacists to routinely obtain a best possible medication history (BPMH). Objectives: The primary objective was to determine whether, for patients undergoing hemodialysis, a pharmacy technician has the skills to obtain a BPMH that would allow a pharmacist to identify drug-related problems. The secondary objectives were to determine the number and types of medication discrepancies and drug-related problems identified and the time required by the technician to complete the BPMH. Methods: All patients treated in the hemodialysis unit during the study period were included, except for those who required an interpreter or were unable to participate in an in-person interview. A single technician was taught how to interview patients according to a structured format. For each patient, the technician’s BMPH was verified by a pharmacist. The agreement rate between technician and pharmacists was determined, along with the number and types of discrepancies and drug-related problems identified. Results: The technician interviewed 99 patients. Of the 1334 medication orders reviewed, the technician and pharmacists agreed on all but 15 (agreement rate 98.9%). A total of 358 medication discrepancies were noted for 93 patients (3.8 discrepancies per patient). Of these, 210 (59%) were undocumented intentional discrepancies, and 148 (41%) were unintentional discrepancies (most commonly errors of commission). Of the 135 drug-related problems identified, the majority involved dosing problems or nonadherence. The technician required an average of 17 min for each interview. Conclusion: An adequately trained technician was capable of interviewing patients to create a BPMH. A variety of medication discrepancies and drug-related problems were identified. Generation of a BPMH by a technician is a useful approach allowing pharmacists to identify drug-related problems. PMID:22478921

Texas curve margin of safety.

DOT National Transportation Integrated Search

2013-01-01

This software can be used to assist with the assessment of margin of safety for a horizontal curve. It is intended for use by engineers and technicians responsible for safety analysis or management of rural highway pavement or traffic control devices...

Effect of individually tailored biopsychosocial workplace interventions on chronic musculoskeletal pain, stress and work ability among laboratory technicians: randomized controlled trial protocol.

PubMed

Jay, Kenneth; Brandt, Mikkel; Sundstrup, Emil; Schraefel, Mc; Jakobsen, Markus D; Sjøgaard, Gisela; Andersen, Lars L

2014-12-18

Among laboratory technicians, the prevalence of neck and shoulder pain is widespread possibly due to typical daily work tasks such as pipetting, preparing vial samples for analysis, and data processing on a computer including mouse work - all tasks that require precision in motor control and may result in extended periods of time spent in static positions.In populations characterized by intense chronic musculoskeletal pain and diagnosed conditions in conjunction with psycho-physiological symptoms such as stress-related pain and soreness and other disabling conditions, multifactorial approaches applying a combination of individually tailored physical and cognitive strategies targeting the areas most needed, may be an effective solution to the physical and mental health challenges.The aim of this study is therefore to investigate the effect of an individually tailored biopsychosocial intervention strategy on musculoskeletal pain, stress and work disability in lab technicians with a history of musculoskeletal pain at a single worksite in Denmark. In this single-blind two-armed parallel-group randomized controlled trial with allocation concealment, participants receive either an individualized multifactorial intervention or "usual care" for 10 weeks at the worksite. 1) female laboratory technician (18-67 years of age) and 2) Pain intensity ≥ 3 (0-10 Visual Analogue Scale) lasting ≥3 months with a frequency of ≥ 3 days per week in one or more of the following regions: i) upper back i) low back iii) neck, iv) shoulder, v) elbow and/or vi) hand. 1) life-threatening disease and 2) pregnancy. Stress, as measured by Cohen´s perceived stress questionnaire is not an inclusion criteria, thus participants can participate regardless of their stress level.We will implement an individualized intervention addressing biopsychosocial elements of musculoskeletal pain with the following components; i) increasing physical capacity through strength- and motor control training; ii) lowering or preventing development of stress through mindfulness practice and learning de-catastrophizing pain management strategies through cognitive training.The primary outcome at 10-week follow-up is the between-group difference in intensity of perceived musculoskeletal pain during the last week (average value of back, neck, shoulder, elbow and hand) assessed by questionnaire (modified visual analogue scale 0-10). This study will provide experimental evidence to guide workplace initiatives designed towards reducing chronic musculoskeletal pain and stress. ClinicalTrials.gov NCT02047669.

Job dynamics of veterinary professionals in an academic research institution. I. Retention and turnover of veterinary technicians.

PubMed

Huerkamp, Michael J

2006-09-01

The turnover of veterinary technicians within an animal resources program averaged 33% annually over 18 y, peaking at 67% in 1998 to 1999. Insufficient retention of veterinary technicians led to diversion of veterinarian effort to technical tasks and to increased allocation of administrative resources for supervising and managing an expanding team of veterinary technicians. To identify factors and trends related to poor retention, address any causes, and reduce turnover, a retrospective analysis of employment records was done. The retention of veterinary technicians was significantly greater for the 9 technicians hired from veterinary private practice rather than for any of 3 other general sources: promotions from the animal care staff, transfers from other research institutions, and miscellaneous sources. Veterinary technician turnover was reduced from a mean of 60% over 1995 to 1999 to an average of 26% during 2000 to 2004. Higher retention was associated with management practices that included renewed concentration on recruiting and interviewing strategies and emphasis on training and career development including merit raises for technician certification through the American Association for Laboratory Animal Science. Higher retention yielded correspondingly greater experience on the job as the mean tenure increased from 1.1 y in 2000 to 2.8 y in 2004. The most valued attributes related to employment by veterinary technicians as determined by survey were to do meaningful work, earn a good living, and have a committed team of coworkers.

Design and Evaluation of an Integrated Online Motion Control Training Package

ERIC Educational Resources Information Center

Buiu, C.

2009-01-01

The aim of this paper is to present an integrated Internet-based package for teaching the fundamentals of motion control by using a wide range of resources: theory, videos, simulators, games, quizzes, and a remote lab. The package is aimed at automation technicians, pupils at vocational schools and students taking an introductory course in…

A Joint Learning Activity in Process Control and Distance Collaboration between Future Engineers and Technicians

ERIC Educational Resources Information Center

Deschênes, Jean-Sebastien; Barka, Noureddine; Michaud, Mario; Paradis, Denis; Brousseau, Jean

2013-01-01

A joint learning activity in process control is presented, in the context of a distance collaboration between engineering and technical-level students, in a similar fashion as current practices in the industry involving distance coordination and troubleshooting. The necessary infrastructure and the setup used are first detailed, followed by a…

Robot welding process control development task

NASA Technical Reports Server (NTRS)

Romine, Peter L.

1992-01-01

The completion of, and improvements made to, the software developed during 1990 for program maintenance on the PC and HEURIKON and transfer to the CYRO, and integration of the Rocketdyne vision software with the CYRO is documented. The new programs were used successfully by NASA, Rocketdyne, and UAH technicians and engineers to create, modify, upload, download, and control CYRO NC programs.

Learner-Centered Instruction (LCI). Volume 5. Description of the Job Performance Test.

ERIC Educational Resources Information Center

Pieper, William J.; And Others

An account is presented of the development of a job performance test for the Learner Centered Instruction (LCI) weapon control systems mechanic/technician Air Force course. The performance test was administered to the LCI experimental course subjects as well as the control course subjects upon graduation. Test items are, for the most part, based…

An Advanced Microcosting System for Forecasting and Managing Radiology Expenses

PubMed Central

Arenson, Ronald; Viale, Richard; van der Voorde, Frans

1985-01-01

The new prospective payment system encourages hospital cost containment and necessitates understanding actual costs for radiology procedures. The automated microcosting system described here, utilizing data from the Radiology Information Management System, hospital expense reports, and payroll management reports, calculates an accurate unit cost for each procedure type. This data is very useful for cost control, enhancement of department efficiency, and planning.

Radiological Weapons Control: A Soviet and US Perspective. Occasional Paper 29.

ERIC Educational Resources Information Center

Issraelyan, Victor L.; Flowerree, Charles C.

Two international diplomats from the Soviet Union and the United States focus on the need for a treaty to ban the use of radiological weapons. Radiological weapons are those based on the natural decay of nuclear material such as waste from military or civilian nuclear reactors. Such devices include both weapons and equipment, other than a nuclear…

Occupational Conversion Index: Enlisted/Officer/Civilian

DTIC Science & Technology

1993-09-01

14A/B OMA Integrated Weapons Technician AT 7975 APQ-126 FLR IMA Technician AT 7976 C-8!85 ASCU IMA Tecnnician AT 7978 APM-446 Radar System Test...Operator/Maintainer AT 6705 CASS Test Station Inter Main, Calibratiort/Adv Maint Technician AT 7923 ASCU & Tactical Computer SSE IMA Technician...GENERAL ARMY 93F Field Artillery Meteorological Crewmember NAVY AG Aerographer’s Mate AG 7412 Analyst-Forecaster MARINE CORPS 0847 a Artillery

An Analysis of the Effect of ASVAB Waivers on A-School Academic Attrition

DTIC Science & Technology

1990-12-01

6224 6537 Boiler Technician ( 4YO ) (BT4) 6260 6486 Boiler Technician (6YO) 614F 614H 6488 Cryptologic Maintenance Technician (CTM) 605A 6161 Electronics...Systems Technician Electrical (6YO) (GSE) 606C 614N 614R Gas Turbine Systems Technician Mechanical (GSM) 614W 614T Machinist’s Mate ( 4YO ) (M*4) 6262...19.05) 4 (17.39) 58 M.( 4YO 372 (29.29) 54 (29.19) 29 (38.67) 455 IM6YO 30 (9.87) 4 (9.30) * 34 OH 18 (69.23) 4 (100) * 22 OS 296 (18.90) 42 (28.19) 6

Optimization of dual-energy subtraction chest radiography by use of a direct-conversion flat-panel detector system.

PubMed

Fukao, Mari; Kawamoto, Kiyosumi; Matsuzawa, Hiroaki; Honda, Osamu; Iwaki, Takeshi; Doi, Tsukasa

2015-01-01

We aimed to optimize the exposure conditions in the acquisition of soft-tissue images using dual-energy subtraction chest radiography with a direct-conversion flat-panel detector system. Two separate chest images were acquired at high- and low-energy exposures with standard or thick chest phantoms. The high-energy exposure was fixed at 120 kVp with the use of an auto-exposure control technique. For the low-energy exposure, the tube voltages and entrance surface doses ranged 40-80 kVp and 20-100 % of the dose required for high-energy exposure, respectively. Further, a repetitive processing algorithm was used for reduction of the image noise generated by the subtraction process. Seven radiology technicians ranked soft-tissue images, and these results were analyzed using the normalized-rank method. Images acquired at 60 kVp were of acceptable quality regardless of the entrance surface dose and phantom size. Using a repetitive processing algorithm, the minimum acceptable doses were reduced from 75 to 40 % for the standard phantom and to 50 % for the thick phantom. We determined that the optimum low-energy exposure was 60 kVp at 50 % of the dose required for the high-energy exposure. This allowed the simultaneous acquisition of standard radiographs and soft-tissue images at 1.5 times the dose required for a standard radiograph, which is significantly lower than the values reported previously.

1400314

NASA Image and Video Library

2014-04-21

2. ENGINEERS AND TECHNICIANS PREPARE FOR AN UPCOMING HOT-FIRE TEST OF A ROCKET INJECTOR MANUFACTURED USING ADDITIVE MANUFACTURING, OR 3-D PRINTING…(L TO R) WILLIE PARKER, INFOPRO TECHNICIAN, BRAD BULLARD, NASA, NICK CASE, NASA, AND RANDALL MCALLISTER, INFOPRO TECHNICIAN

Changes in radiological protection and quality control in Spanish dental installations: 1996-2003.

PubMed

Alcaraz-Baños, Miguel; Parra-Pérez, María del Carmen; Armero-Barranco, David; Velasco-Hidalgo, Francisco; Velasco-Hidalgo, Esteban

2009-10-01

The European Union has established specific directives concerning radiological protection which are obligatory for member States. In addition, all Spanish dental clinics with radiological equipment are required to have an annual quality control check. To analyze the effect of new European legislation on dental radiological practice in Spain and to determine whether it has resulted in lower doses being administered to patients. A total of 10,171 official radiological quality control reports on Spanish dental clinics, covering 16 autonomous regions, were studied following the passing of Royal Decree 2071/1995 on quality criteria in radiodiagnostic installations. The reports, compiled by U.T.P.R Asigma S.A., a company authorised by the Nuclear Safety Council, cover the years 1996 to 2003, which has enabled us to monitor the evolution of radiological procedures in dental clinics over a seven year period. According to the reports for 2003, 77.3 % of clinics complied with EU requirements, using equipment of 70 kVp, 8 mA, 1.5 mm Al filters, with a collimator length of 20 cm. However, non-compliance was detected in approximately a third (30.8%) of the equipment inspected: alterations in the kilovoltage used, exposure time, performance of the tubing, dosage, linearity/intensity of current and acoustic-luminous signal 6.86%. The mean skin dose reached 3.11 mGy for patients who received an x-ray of an upper molar, representing a decrease of 18% over the seven years studied. there has obviously been a general improvement in the parameters studied, but only 77.3% of the installations complied fully with official EU regulations concerning dental radiological protection.

Survey of occupational hazards in Minnesota veterinary practices in 2012

PubMed Central

Fowler, Heather N.; Holzbauer, Stacy M.; Smith, Kirk E.; Scheftel, Joni M.

2017-01-01

OBJECTIVE To identify the scope of occupational hazards encountered by veterinary personnel and compare hazard exposures between veterinarians and technicians working in small and large animal practices. DESIGN Cross-sectional survey. POPULATION Licensed veterinarians and veterinary staff in Minnesota. PROCEDURES A survey of Minnesota veterinary personnel was conducted between February 1 and December 1, 2012. Adult veterinary personnel working in clinical practice for > 12 months were eligible to participate. Information was collected on various workplace hazards as well as on workplace safety culture. RESULTS 831 eligible people responded, representing approximately 10% of Minnesota veterinary personnel. A greater proportion of veterinarians (93%; 368/394) reported having received preexposure rabies vaccinations than did veterinary technicians (54%; 198/365). During their career, 226 (27%) respondents had acquired at least 1 zoonotic infection and 636 (77%) had been injured by a needle or other sharps. Recapping of needles was reported by 87% of respondents; the most common reason reported by veterinarians (41%; 142/345) and veterinary technicians (71%; 238/333) was being trained to do so at school or work. Recent feelings of depression were reported by 204 (25%) respondents. A greater proportion of technicians (42%; 155/365) than veterinarians (21%; 81/394) indicated working in an environment in which employees experienced some form of workplace abuse. CONCLUSIONS AND CLINICAL RELEVANCE Veterinary personnel in Minnesota were exposed to several work-related hazards. Practice staff should assess workplace hazards, implement controls, and incorporate instruction on occupational health into employee training. PMID:26720089

Comparative assessment of blood lead levels of automobile technicians in organised and roadside garages in Lagos, Nigeria.

PubMed

Saliu, Abdulsalam; Adebayo, Onajole; Kofoworola, Odeyemi; Babatunde, Ogunowo; Ismail, Abdussalam

2015-01-01

Occupational exposure to lead is common among automobile technicians and constitutes 0.9% of total global health burden with a majority of cases in developing countries. The aim of this study was to determine and compare the blood lead levels of automobile technicians in roadside and organised garages in Lagos State, Nigeria. This was a comparative cross-sectional study. Data were collected using interviewer-administered questionnaires. Physical examinations were conducted and blood was analysed for lead using atomic spectrophotometery. Statistical analyses were performed to compare the median blood lead levels of each group using the independent sample (Mann-Whitney U) test. Seventy-three (40.3%) of the organised compared to 59 (34.3%) of the roadside groups had high blood lead levels. The organised group had statistically significant higher median blood lead levels of, 66.0 µg/dL than the roadside 43.5 µg/dL (P < 0.05). There was also statistically significant association between high blood lead levels and abnormal discolouration of the mucosa of the mouth in the organised group. Automobile technicians in organised garages in Lagos have higher prevalence of elevated blood lead levels and higher median levels than the roadside group. Preventive strategies against lead exposures should be instituted by the employers and further actions should be taken to minimize exposures, improve work practices, implement engineering controls (e.g., proper ventilation), and ensure the use of personal protective equipment.

Comparative Assessment of Blood Lead Levels of Automobile Technicians in Organised and Roadside Garages in Lagos, Nigeria

PubMed Central

Saliu, Abdulsalam; Adebayo, Onajole; Kofoworola, Odeyemi; Babatunde, Ogunowo; Ismail, Abdussalam

2015-01-01

Occupational exposure to lead is common among automobile technicians and constitutes 0.9% of total global health burden with a majority of cases in developing countries. The aim of this study was to determine and compare the blood lead levels of automobile technicians in roadside and organised garages in Lagos State, Nigeria. This was a comparative cross-sectional study. Data were collected using interviewer-administered questionnaires. Physical examinations were conducted and blood was analysed for lead using atomic spectrophotometery. Statistical analyses were performed to compare the median blood lead levels of each group using the independent sample (Mann-Whitney U) test. Seventy-three (40.3%) of the organised compared to 59 (34.3%) of the roadside groups had high blood lead levels. The organised group had statistically significant higher median blood lead levels of, 66.0 µg/dL than the roadside 43.5 µg/dL (P < 0.05). There was also statistically significant association between high blood lead levels and abnormal discolouration of the mucosa of the mouth in the organised group. Automobile technicians in organised garages in Lagos have higher prevalence of elevated blood lead levels and higher median levels than the roadside group. Preventive strategies against lead exposures should be instituted by the employers and further actions should be taken to minimize exposures, improve work practices, implement engineering controls (e.g., proper ventilation), and ensure the use of personal protective equipment. PMID:25759723

Electronics Curriculum.

ERIC Educational Resources Information Center

Prickett, Charlotte

This document presents results of research conducted by industry representatives regarding tasks performed by electronic technicians and line manufacturing electro-mechanical technicians in Arizona electronics industries. Based on this research, a competency-based curriculum was developed for training entry-level electronics technicians. Twelve…

Job satisfaction and patient care practices of hemodialysis nurses and technicians.

PubMed

Perumal, Seena; Sehgal, Ashwini R

2003-10-01

The quality of hemodialysis care has been the focus of intense scrutiny, yet little is known about the job satisfaction of the nurses and technicians providing this care. We identified 240 nurses and technicians from 307 randomly selected American facilities and asked them about (a) specific domains of job satisfaction, (b) overall job satisfaction, and (c) self-reported patient care practices. Fewer than half of nurses and technicians were satisfied with their pay or their opportunities for advancement. Almost all subjects were satisfied with their personal delivery of patient care, their chance to do things for others, and their job security. About three-fourths of nurses and technicians expressed overall satisfaction with their jobs. Higher job satisfaction was associated with increased attention to patient psychosocial and educational needs. We urge local and national associations of nurses and technicians to collaborate with dialysis facilities, chains, and regulatory agencies to address specific aspects of job satisfaction.

[Role of the technician in a brachytherapy department].

PubMed

Bélot-Cheval, V; Lemoine, L; Cuisinier, C; Gensse, M-C; Lasbareilles, O

2013-04-01

The role of the technician in a brachytherapy department is essential for the cohesion of the treatment team made up of the radiation oncologist, the physicist, and the technician. He/she collaborates in the different treatment steps such as taking care of the patients, training of the professionals and research studies in collaboration with the team. He participates in all steps of the treatment such as preparation, technician's consultation, catheters/templates and radioactives sources implant, dose distribution analysis and treatment. He looks after the management of planning, radioactive sources and chemist's equipments. He takes part in the training of the junior technician, and support doctors and physicists in different studies. The procedure writing and the presentation of professional practices are also part of the technician task. Copyright © 2013 Société française de radiothérapie oncologique (SFRO). Published by Elsevier SAS. All rights reserved.

Decision theory applied to image quality control in radiology.

PubMed

Lessa, Patrícia S; Caous, Cristofer A; Arantes, Paula R; Amaro, Edson; de Souza, Fernando M Campello

2008-11-13

The present work aims at the application of the decision theory to radiological image quality control (QC) in diagnostic routine. The main problem addressed in the framework of decision theory is to accept or reject a film lot of a radiology service. The probability of each decision of a determined set of variables was obtained from the selected films. Based on a radiology service routine a decision probability function was determined for each considered group of combination characteristics. These characteristics were related to the film quality control. These parameters were also framed in a set of 8 possibilities, resulting in 256 possible decision rules. In order to determine a general utility application function to access the decision risk, we have used a simple unique parameter called r. The payoffs chosen were: diagnostic's result (correct/incorrect), cost (high/low), and patient satisfaction (yes/no) resulting in eight possible combinations. Depending on the value of r, more or less risk will occur related to the decision-making. The utility function was evaluated in order to determine the probability of a decision. The decision was made with patients or administrators' opinions from a radiology service center. The model is a formal quantitative approach to make a decision related to the medical imaging quality, providing an instrument to discriminate what is really necessary to accept or reject a film or a film lot. The method presented herein can help to access the risk level of an incorrect radiological diagnosis decision.

A Comparison of Medication Histories Obtained by a Pharmacy Technician Versus Nurses in the Emergency Department.

PubMed

Markovic, Marija; Mathis, A Scott; Ghin, Hoytin Lee; Gardiner, Michelle; Fahim, Germin

2017-01-01

To compare the medication history error rate of the emergency department (ED) pharmacy technician with that of nursing staff and to describe the workflow environment. Fifty medication histories performed by an ED nurse followed by the pharmacy technician were evaluated for discrepancies (RN-PT group). A separate 50 medication histories performed by the pharmacy technician and observed with necessary intervention by the ED pharmacist were evaluated for discrepancies (PT-RPh group). Discrepancies were totaled and categorized by type of error and therapeutic category of the medication. The workflow description was obtained by observation and staff interview. A total of 474 medications in the RN-PT group and 521 in the PT-RPh group were evaluated. Nurses made at least one error in all 50 medication histories (100%), compared to 18 medication histories for the pharmacy technician (36%). In the RN-PT group, 408 medications had at least one error, corresponding to an accuracy rate of 14% for nurses. In the PT-RPh group, 30 medications had an error, corresponding to an accuracy rate of 94.4% for the pharmacy technician ( P < 0.0001). The most common error made by nurses was a missing medication (n = 109), while the most common error for the pharmacy technician was a wrong medication frequency (n = 19). The most common drug class with documented errors for ED nurses was cardiovascular medications (n = 100), while the pharmacy technician made the most errors in gastrointestinal medications (n = 11). Medication histories obtained by the pharmacy technician were significantly more accurate than those obtained by nurses in the emergency department.

The Makings of a Technician.

ERIC Educational Resources Information Center

Baird, Collette

1996-01-01

Describes the development of occupational standards for technicians in education and highlights the main aspects of the work. Explains the importance of learning as much as possible about technicians' work so that emerging occupational standards are both accurate and enabling. (DDR)

The Engineering Technician.

ERIC Educational Resources Information Center

American Society for Engineering Education, Washington, DC.

Occupational and educational information concerning 12 categories of engineering technicians and engineering technology is presented. This information covers the role of the technicians, student qualifications, typical job titles, and typical educational programs. The categories presented are (1) air conditioning, heating, and refrigeration, (2)…

A Catalog of Performance Objectives and Performance Guides for Laser Systems Technician for the Job Titles of Laser Technician D.O.T. 019.181-010, Laser Systems Technician D.O.T.-N/A.

ERIC Educational Resources Information Center

Pennsylvania State Dept. of Education, Harrisburg. Bureau of Vocational and Technical Education.

This catalog lists and describes the tasks performed by a laser technician and standards for their performance. Each duty contains performance objectives for related tasks. Included in the objectives are standards that must be met and conditions for performance of the tasks. Performance guides provided for each objective identify the conditions…

Defining the Role of the Pharmacy Technician and Identifying Their Future Role in Medicines Optimisation.

PubMed

Boughen, Melanie; Sutton, Jane; Fenn, Tess; Wright, David

2017-07-15

Traditionally, pharmacy technicians have worked alongside pharmacists in community and hospital pharmacy. Changes within pharmacy provide opportunity for role expansion and with no apparent career pathway, there is a need to define the current pharmacy technician role and role in medicines optimisation. To capture the current roles of pharmacy technicians and identify how their future role will contribute to medicines optimisation. Following ethical approval and piloting, an online survey to ascertain pharmacy technicians' views about their roles was undertaken. Recruitment took place in collaboration with the Association of Pharmacy Technicians UK. Data were exported to SPSS, data screened and descriptive statistics produced. Free text responses were analysed and tasks collated into categories reflecting the type of work involved in each task. Responses received were 393 (28%, n = 1380). Results were organised into five groups: i.e., hospital, community, primary care, General Practitioner (GP) practice and other (which included HM Prison Service). Thirty tasks were reported as commonly undertaken in three or more settings and 206 (84.7%, n = 243) pharmacy technicians reported they would like to expand their role. Tasks core to hospital and community pharmacy should be considered for inclusion to initial education standards to reflect current practice. Post qualification, pharmacy technicians indicate a significant desire to expand clinically and managerially allowing pharmacists more time in patient-facing/clinical roles.

Implications of involving pharmacy technicians in obtaining a best possible medication history from the perspectives of pharmaceutical, medical and nursing staff: a qualitative study.

PubMed

Niederhauser, Andrea; Zimmermann, Chantal; Fishman, Liat; Schwappach, David L B

2018-05-17

In recent years, the involvement of pharmacy technicians in medication reconciliation has increasingly been investigated. The aim of this study was to assess the implications on professional roles and collaboration when a best possible medication history (BPMH) at admission is obtained by pharmacy technicians. Qualitative study with semistructured interviews. Data were analysed using a qualitative content analysis approach. Internal medicine units in two mid-sized Swiss hospitals. 21 staff members working at the two sites (6 pharmacy technicians, 2 pharmacists, 6 nurses, 5 physician residents and 2 senior physicians). Pharmacy technicians generally appreciated their new tasks in obtaining a BPMH. However, they also experienced challenges associated with their new role. Interviewees reported unease with direct patient interaction and challenges with integrating the new BPMH tasks into their regular daily duties. We found that pharmacists played a key role in the BPMH process, since they act as coaches for pharmacy technicians, transmit information to the physicians and reconcile preadmission medication lists with admission orders. Physicians stated that they benefitted from the delegation of administrative tasks to pharmacy technicians. Regarding the interprofessional collaboration, we found that pharmacy technicians in the study acted on a preliminary administrative level and did not become part of the larger treatment team. There was no direct interaction between pharmacy technicians and physicians, but rather, the supervising pharmacists acted as intermediaries. The tasks assumed by pharmacy technicians need to be clearly defined and fully integrated into existing processes. Engaging pharmacy technicians may generate new patient safety risks and inefficiencies due to process fragmentation. Communication and information flow at the interfaces between professional groups therefore need to be well organised. More research is needed to understand if and under which circumstances such a model can be efficient and contribute to improving medication safety. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Improved understanding of human anatomy through self-guided radiological anatomy modules.

PubMed

Phillips, Andrew W; Smith, Sandy G; Ross, Callum F; Straus, Christopher M

2012-07-01

To quantifiably measure the impact of self-instructed radiological anatomy modules on anatomy comprehension, demonstrated by radiology, gross, and written exams. Study guides for independent use that emphasized structural relationships were created for use with two online radiology atlases. A guide was created for each module of the first year medical anatomy course and incorporated as an optional course component. A total of 93 of 96 eligible students participated. All exams were normalized to control for variances in exam difficulty and body region tested. An independent t-test was used to compare overall exam scores with respect to guide completion or incompletion. To account for aptitude differences between students, a paired t-test of each student's exam scores with and without completion of the associated guide was performed, thus allowing students to serve as their own controls. Twenty-one students completed no study guides; 22 completed all six guides; and 50 students completed between one and five guides. Aggregate comparisons of all students' exam scores showed significantly improved mean performance when guides were used (radiology, 57.8% [percentile] vs. 45.1%, P < .001; gross, 56.9% vs. 46.5%, P = .001; written, 57.8% vs. 50.2%, P = .011). Paired comparisons among students who completed between one and five guides demonstrated significantly higher mean practical exam scores when guides were used (radiology, 49.3% [percentile] vs. 36.0%, P = .001; gross, 51.5% vs. 40.4%, P = .005), but not higher written scores. Radiological anatomy study guides significantly improved anatomy comprehension on radiology, gross, and written exams. Copyright © 2012 AUR. Published by Elsevier Inc. All rights reserved.

Effects of instructional strategies using cross sections on the recognition of anatomical structures in correlated CT and MR images.

PubMed

Khalil, Mohammed K; Paas, Fred; Johnson, Tristan E; Su, Yung K; Payer, Andrew F

2008-01-01

This research is an effort to best utilize the interactive anatomical images for instructional purposes based on cognitive load theory. Three studies explored the differential effects of three computer-based instructional strategies that use anatomical cross-sections to enhance the interpretation of radiological images. These strategies include: (1) cross-sectional images of the head that can be superimposed on radiological images, (2) transparent highlighting of anatomical structures in radiological images, and (3) cross-sectional images of the head with radiological images presented side-by-side. Data collected included: (1) time spent on instruction and on solving test questions, (2) mental effort during instruction and test, and (3) students' performance to identify anatomical structures in radiological images. Participants were 28 freshmen medical students (15 males and 13 females) and 208 biology students (190 females and 18 males). All studies used posttest-only control group design, and the collected data were analyzed by either t test or ANOVA. In self-directed computer-based environments, the strategies that used cross sections to improve students' ability to recognize anatomic structures in radiological images showed no significant positive effects. However, when increasing the complexity of the instructional materials, cross-sectional images imposed a higher cognitive load, as indicated by higher investment of mental effort. There is not enough evidence to claim that the simultaneous combination of cross sections and radiological images has no effect on the identification of anatomical structures in radiological images for novices. Further research that control for students' learning and cognitive style is needed to reach an informative conclusion.

TECHcitement: Advances in Technological Education, 2007

ERIC Educational Resources Information Center

Patton, Madeline

2007-01-01

This publication presents the following nine articles: (1) ATE [Advanced Technological Education] Readies Technicians for International Competition; (2) Technicians in Demand Worldwide; (3) Accreditation Board for Engineering and Technology Endorses International Protocols for Technicians; (4) Entrepreneurial Educator Creates InnovaBio to Meet…

7 CFR 868.84 - Suspension or revocation of license.

Code of Federal Regulations, 2010 CFR

2010-01-01

... REGULATIONS AND STANDARDS FOR CERTAIN AGRICULTURAL COMMODITIES Regulations Licensed Inspectors, Technicians, and Samplers § 868.84 Suspension or revocation of license. (a) General. (1) An inspector's, technician... health, interest, or safety require, the Administrator may summarily suspend an inspector's, technician's...

40 CFR 82.250 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., and disposal of equipment containing halons and during technician training; requiring organizations that employ technicians to provide emissions reduction training; and requiring proper disposal of... technician training. This subpart also applies to any person disposing of halons; to manufacturers of halon...

14 CFR 147.3 - Certificate required.

Code of Federal Regulations, 2010 CFR

2010-01-01

... OTHER CERTIFICATED AGENCIES AVIATION MAINTENANCE TECHNICIAN SCHOOLS General § 147.3 Certificate required. No person may operate as a certificated aviation maintenance technician school without, or in violation of, an aviation maintenance technician school certificate issued under this part. [Doc. No. 15196...

Evaluation of the effectiveness of Haemophilus influenzae type b conjugate vaccine introduction against radiologically-confirmed hospitalized pneumonia in young children in Ukraine.

PubMed

Pilishvili, Tamara; Chernyshova, Liudmyla; Bondarenko, Anastasia; Lapiy, Fedir; Sychova, Irina; Cohen, Adam; Flannery, Brendan; Hajjeh, Rana

2013-07-01

Haemophilus influenzae type b (Hib) conjugate vaccine was included into the national vaccination schedule of Ukraine in 2006. The objective of this study was to demonstrate the effectiveness of Hib conjugate vaccine against radiologically-confirmed hospitalized pneumonia in children. Children <2 years old with radiologically confirmed pneumonia admitted to 11 participating hospitals in Kiev and Dnepropetrovsk between April 2007 and June 2009 were included in a case-control evaluation. Four controls were matched to each case by date of birth (within 14 days) and outpatient clinic. We estimated ORs for vaccination and vaccine effectiveness ((1 - OR)*100%) using conditional logistic regression, adjusting for comorbid conditions and contraindications for vaccination. We enrolled 188 case-children and 735 controls. Median age was 16 months (range 4-24 months). Fifty-one percent of cases and 67% of controls received ≥1 doses of Hib conjugate vaccine; 26% of cases and 37% of controls received ≥3 doses. The effectiveness of ≥1 dose Hib conjugate vaccine was estimated at 45% (95% CI 18%-63%). Our study showed that Hib infections are important causes of hospitalized radiologically confirmed pneumonia in young children in Ukraine. Copyright © 2013. Published by Mosby, Inc.

Aircraft Materials, Processes, Cleaning and Corrosion Control (Course Outline), Aviation Mechanics 1 (Power and Frame): 9073.01.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

This document presents an outline for a 135-hour course designed to familiarize the beginning student with the basic concepts common to aircraft materials and processes, together with the requirements of proper cleaning and corrosion control as outlined by the Federal Aviation Agency. The aviation airframe and powerplant maintenance technician is…

Preventing tuberculosis in healthcare workers of the radiology department: a Malaysian perspective.

PubMed

Tan, Lh; Kamarulzaman, A

2006-01-01

Tuberculosis (TB) is a well recognised occupational hazard for healthcare workers (HCWs). Concerns on the safety of healthcare settings in Malaysia was raised following a report of 25 HCWs working in 11 general hospitals in Malaysia who were infected with TB in 2004 being publicised in the media recently. As the disease burden in general is high in Malaysia, due attention should be given to this disease in our healthcare facilities including the radiology department, an often neglected area in TB infection control programmes. This article focuses on the key control measures that can be implemented in radiology departments in a developing country with limited resources.

Radiology preparedness in ebola virus disease: guidelines and challenges for disinfection of medical imaging equipment for the protection of staff and patients.

PubMed

Mollura, Daniel J; Palmore, Tara N; Folio, Les R; Bluemke, David A

2015-05-01

The overlap of early Ebola virus disease (EVD) symptoms (eg, fever, headache, abdominal pain, diarrhea, emesis, and fatigue) with symptoms of other more common travel-related diseases (eg, malaria, typhoid fever, pneumonia, and meningococcemia) may result in delayed diagnosis of EVD before isolation of infected patients. Radiology departments should consider policies for and approaches to decontamination of expensive and potentially easily damaged radiology equipment. In addition, the protection of radiology personnel must be considered during the work-up phase of undiagnosed EVD patients presenting to emergency departments. The purpose of this article is to consider the effect of EVD on radiology departments and imaging equipment, with particular consideration of guidelines currently available from the Centers for Disease Control and Prevention that may be applicable to radiology. (©) RSNA, 2015.

Design and preliminary validation of a mobile application-based expert system to facilitate repair of medical equipment in resource-limited health settings.

PubMed

Wong, Alison L; Lacob, Kelly M; Wilson, Madeline G; Zwolski, Stacie M; Acharya, Soumyadipta

2018-01-01

One of the greatest barriers to safe surgery is the availability of functional biomedical equipment. Biomedical technicians play a major role in ensuring that equipment is functional. Following in-field observations and an online survey, a mobile application was developed to aid technicians in troubleshooting biomedical equipment. It was hypothesized that this application could be used to aid technicians in equipment repair, as modeled by repair of a pulse oximeter. To identify specific barriers to equipment repair and maintenance for biomedical technicians, an online survey was conducted to determine current practices and challenges. These findings were used to guide the development of a mobile application system that guides technicians through maintenance and repair tasks. A convenience sample of technicians in Ethiopia tested the application using a broken pulse oximeter task and following this completed usability and content validity surveys. Fifty-three technicians from 13 countries responded to the initial survey. The results of the survey showed that technicians find equipment manuals most useful, but these are not easily accessible. Many do not know how to or are uncomfortable reaching out to human resources. Thirty-three technicians completed the broken pulse oximeter task using the application. All were able to appropriately identify and repair the equipment, and post-task surveys of usability and content validity demonstrated highly positive scores (Agree to Strongly Agree) on both scales. This research demonstrates the need for improved access to resources for technicians and shows that a mobile application can be used to address a gap in the access to knowledge and resources in low- and middle-income countries. Further research will include prospective studies to determine the impact of an application on the availability of functional equipment in a hospital and the effect on the provision and safety of surgical care.

A Grounded Theory Study of Aircraft Maintenance Technician Decision-Making

NASA Astrophysics Data System (ADS)

Norcross, Robert

Aircraft maintenance technician decision-making and actions have resulted in aircraft system errors causing aircraft incidents and accidents. Aircraft accident investigators and researchers examined the factors that influence aircraft maintenance technician errors and categorized the types of errors in an attempt to prevent similar occurrences. New aircraft technology introduced to improve aviation safety and efficiency incur failures that have no information contained in the aircraft maintenance manuals. According to the Federal Aviation Administration, aircraft maintenance technicians must use only approved aircraft maintenance documents to repair, modify, and service aircraft. This qualitative research used a grounded theory approach to explore the decision-making processes and actions taken by aircraft maintenance technicians when confronted with an aircraft problem not contained in the aircraft maintenance manuals. The target population for the research was Federal Aviation Administration licensed aircraft and power plant mechanics from across the United States. Nonprobability purposeful sampling was used to obtain aircraft maintenance technicians with the experience sought in the study problem. The sample population recruitment yielded 19 participants for eight focus group sessions to obtain opinions, perceptions, and experiences related to the study problem. All data collected was entered into the Atlas ti qualitative analysis software. The emergence of Aircraft Maintenance Technician decision-making themes regarding Aircraft Maintenance Manual content, Aircraft Maintenance Technician experience, and legal implications of not following Aircraft Maintenance Manuals surfaced. Conclusions from this study suggest Aircraft Maintenance Technician decision-making were influenced by experience, gaps in the Aircraft Maintenance Manuals, reliance on others, realizing the impact of decisions concerning aircraft airworthiness, management pressures, and legal concerns related to decision-making. Recommendations included an in-depth systematic review of the Aircraft Maintenance Manuals, development of a Federal Aviation Administration approved standardized Aircraft Maintenance Technician decision-making flow diagram, and implementation of risk based decision-making training. The benefit of this study is to save the airline industry revenue by preventing poor decision-making practices that result in inefficient maintenance actions and aircraft incidents and accidents.

A reliability-based maintenance technicians' workloads optimisation model with stochastic consideration

NASA Astrophysics Data System (ADS)

Ighravwe, D. E.; Oke, S. A.; Adebiyi, K. A.

2016-06-01

The growing interest in technicians' workloads research is probably associated with the recent surge in competition. This was prompted by unprecedented technological development that triggers changes in customer tastes and preferences for industrial goods. In a quest for business improvement, this worldwide intense competition in industries has stimulated theories and practical frameworks that seek to optimise performance in workplaces. In line with this drive, the present paper proposes an optimisation model which considers technicians' reliability that complements factory information obtained. The information used emerged from technicians' productivity and earned-values using the concept of multi-objective modelling approach. Since technicians are expected to carry out routine and stochastic maintenance work, we consider these workloads as constraints. The influence of training, fatigue and experiential knowledge of technicians on workload management was considered. These workloads were combined with maintenance policy in optimising reliability, productivity and earned-values using the goal programming approach. Practical datasets were utilised in studying the applicability of the proposed model in practice. It was observed that our model was able to generate information that practicing maintenance engineers can apply in making more informed decisions on technicians' management.

Decision support methodology to establish priorities on the inspection of structures

NASA Astrophysics Data System (ADS)

Cortes, V. Juliette; Sterlacchini, Simone; Bogaard, Thom; Frigerio, Simone; Schenato, Luca; Pasuto, Alessandro

2014-05-01

For hydro-meteorological hazards in mountain areas, the regular inspection of check dams and bridges is important due to the effect of their functional status on water-sediment processes. Moreover, the inspection of these structures is time consuming for organizations due to their extensive number in many regions. However, trained citizen-volunteers can support civil protection and technical services in the frequency, timeliness and coverage of monitoring the functional status of hydraulic structures. Technicians should evaluate and validate these reports to get an index for the status of the structure. Thus, preventive actions could initiate such as the cleaning of obstructions or to pre-screen potential problems for a second level inspection. This study proposes a decision support methodology that technicians can use to assess an index for three parameters representing the functional status of the structure: a) condition of the structure at the opening of the stream flow, b) level of obstruction at the structure and c) the level of erosion in the stream bank. The calculation of the index for each parameter is based upon fuzzy logic theory to handle ranges in precision of the reports and to convert the linguistic rating scales into numbers representing the structure's status. A weighting method and multi-criteria method (Analytic Hierarchy Process- AHP and TOPSIS), can be used by technicians to combine the different ratings according to the component elements of the structure and the completeness of the reports. Finally, technicians can set decision rules based on the worst rating and a threshold for the functional indexes. The methodology was implemented as a prototype web-based tool to be tested with technicians of the Civil Protection in the Fella basin, Northern Italy. Results at this stage comprise the design and implementation of the web-based tool with GIS interaction to evaluate available reports and to set priorities on the inspection of structures. Keywords Decision-making, Multi-criteria methods, Torrent control structures, Web-based tools.

Weld Repair of a Stamped Pressure Vessel in a Radiologically Controlled Zone

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cannell, Gary L.; Huth, Ralph J.; Hallum, Randall T.

2013-08-26

In September 2012 an ASME B&PVC Section VIII stamped pressure vessel located at the DOE Hanford Site Effluent Treatment Facility (ETF) developed a through-wall leak. The vessel, a steam/brine heat exchanger, operated in a radiologically controlled zone (by the CH2MHill PRC or CHPRC), had been in service for approximately 17 years. The heat exchanger is part of a single train evaporator process and its failure caused the entire system to be shut down, significantly impacting facility operations. This paper describes the activities associated with failure characterization, technical decision making/planning for repair by welding, logistical challenges associated with performing work inmore » a radiologically controlled zone, performing the repair, and administrative considerations related to ASME code requirements.« less

ATIP: Automotive Technician Internship Program.

ERIC Educational Resources Information Center

De Anza Coll., Cupertino, CA.

The Automotive Technology Department (ATD) of De Anza College (DAC) in Cupertino, California, in partnership with the Automotive Service Council of California, received funding to develop and implement a 2-year, competency-based certification program for automotive service technicians. Students in the Automotive Technician Internship Program…

Diesel Engine Technician

ERIC Educational Resources Information Center

Tech Directions, 2010

2010-01-01

Diesel engine technicians maintain and repair the engines that power transportation equipment such as heavy trucks, trains, buses, and locomotives. Some technicians work mainly on farm machines, ships, compressors, and pumps. Others work mostly on construction equipment such as cranes, power shovels, bulldozers, and paving machines. This article…

CONTOUR COUCH - MERCURY-ATLAS (MA)-9 PRELAUNCH ACTIVITIES - CAPE

NASA Image and Video Library

1963-02-01

S63-03968 (1963) --- Astronaut L. Gordon Cooper Jr., prime pilot for the Mercury-Atlas 9 (MA-9) mission; Joe Trammel, MAC technician; A. Rochford, NASA suit technician; and C.R. Coyle, MAC technician, look over spacecraft couch. Photo credit: NASA

Implications for Veterinary Medical Education: Paraprofessional Education.

ERIC Educational Resources Information Center

Lukens, Roger

1980-01-01

The emergence of the veterinary technician as an extension of the veterinarian's capability into animal agriculture is discussed. Some aspects reviewed include: technician education, current restrictions imposed by practice acts, general acceptance by the consumer, and effective relationships for veterinary technicians working under the…

Technician Education Yearbook 1984.

ERIC Educational Resources Information Center

Prakken Publications, Inc., Ann Arbor, MI.

This yearbook deals with technician education. Included in a section on new issues, problems, and proposals for technician education are the following papers: "High Technology Challenges the Vocational-Technical Curriculum," by Walter J. Brooking; "Assessment of Technical Competency," by Gordon C. McMahon; "Industry and Education Cooperation…

Developing a Program for Water/Wastewater Technology.

ERIC Educational Resources Information Center

Valentine, Ivan E.; And Others

1979-01-01

Describes a water/wastewater technician program that provides: (1) entry-level skills for individuals seeking employment as water/wastewater technicians, (2) upgrading courses for operators and technicians already employed, and (3) instruction for those who are preparing for Colorado state water/wastewater certification. (LRA)

24 CFR 291.510 - Overview of the GNND Sales Program.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Program enables a full-time law enforcement officer, teacher, or firefighter/emergency medical technician... the law enforcement officer, teacher, or firefighter/emergency medical technician finances the home... officers, teachers, and firefighters/emergency medical technicians prior to listing the properties for sale...

24 CFR 291.540 - Owner-occupancy term.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., teacher, or firefighter/emergency medical technician submits a written and signed request to HUD... firefighter/emergency medical technician that: (A) The law enforcement officer, teacher, or firefighter/emergency medical technician is not abandoning the home as his/her permanent residence; and (B) The law...

Social Actions Career Ladder and Utilization Field, AFSCs 734X0A/B, 736XA/B, 737X, 73499, and 73400.

DTIC Science & Technology

1984-11-01

enlisted specialty was composed of three shreds: 734XOA - Social Actions Technician, Equal Opportunity; 734XOB- Social Actions Technician, Drug/Alcohol...and 734X0C - Social Actions Technician, Race Relations. On 30 April 1980, the Equal Opportunity and Race Relations specialties were merged to form...AFS 734X0A - Social Actions Technician, Equal Opportunity/Human Relations. The officer Social Actions utilization field was created on 31 January 1973

Aviation Warrant Officer Program and Enlisted Aviator Study

DTIC Science & Technology

1977-11-01

MOS. No direct appointment into this MOS. (b) 961A (ATTACHE TECHNICIAN) Entry and advanced MOS. (c) 221B ( NIKE MISSILE ASSEMBLY TECHNICIAN) Entry MOS...Advanced level is MOS, 251B (Air Defense Missile System Repair Technician, NIKE ) (d) 963A (INTERROGATION TECHNICIAN) Entry and advanced MOS, but...30 SEP 77 021A - Club Manager 9 2 222B - AD MSL Fire Tech, Nike 13 39 *Authorization equals 10.0% of the assigned strength for FY 77. 18 To make a

The Influence of Skill Development Training Program for Spiritual Care of Elderly Individual on Elderly Care Technician Students' Perception of Spiritual Support.

PubMed

Bulduk, Serap; Usta, Esra; Dinçer, Yeliz

2017-06-01

Spiritual care means helping an individual protect, maintain and gain all the dimensions of his/her existence. Elderly care technicians face numerous cases or crisis situations in which elderly individuals from different backgrounds question the meaning and value of life. Elderly care technicians must acknowledge that the spirituality is an important element in the way an elderly individual receives healthcare and they must be equipped for this matter. This study was conducted in order to examine the influence of "Skill Development Training Program for Spiritual Care of Elderly Individual," which was carried out with students from elderly care program, on the perception of spirituality support in a pretest-posttest quasi-experimental study design with control group. As the data collection form, "Spiritual Support Perception" (SSP) scale was used. The mean scores of the intervention group after the training and after one month are 50.39 ± 5.34 and 51.13 ± 4.98, respectively, and those of the control group are 43.16 ± 4.83 and 42.72 ± 4.48. A statistically significant difference was found between the mean scores of the intervention group from the pretest and the posttests immediately after the training and one month after the training (f = 94.247, p = 0.001). In the control group, however, there was no significant change in the SSP mean scores (f = 0.269, p = 0.77). As a result, this study pointed out the necessity of such training programs for healthcare professionals to make a distinction between their professional duties and their own personalities in order to offer spiritual care to the elderly individual.

[Radiological control intraoperatory of a surgical piece in non palpable breast lesions].

PubMed

Ruvalcaba Limón, Eva; Espejo Fonseca, Ruby; Bautista Piña, Verónica; Madero Preciado, Luis; Capurso Garcia, Marino; Serratos Garduño, José Eduardo; Hohenstein, Fernando Guisa; Rodríguez Cuevas, Sergio

2009-09-01

nonconcrete the mammary injuries are frequent in programs of detection of breast cancer, estereotaxic or ecographic marking is required to realize its split. The intrasurgical radiation control of the surgical piece is indispensable to evaluate the margins of the mammary cancer. to determine the effectiveness of the intrasurgical radiation control of the surgical piece in nonconcrete mammary injuries to diminish the surgical reinterventions to extend margins. women with nonconcrete mammary injuries to those who biopsy by split became, previous marking and intraoperating radiation control of the surgical piece to value margins (suitable margin the same or major of 10 mm, smaller inadequate margin of 10 mm). Intrasurgical reesicion in inadequate radiological margins became. The demographic characteristics, masto-ecographics images, histopathology of the injuries and the radiological-histopatol6gica correlation of the margins studied. Cross-sectional, prospective and descriptive study. 103 patients with 113 nonconcrete mammary injuries included themselves, with age average of 51,35 (32-73) years. In all the injuries the intrasurgical radiation control became of the surgical piece. The prevalence of mammary cancer was of 28.3% (32/113), that corresponds to stellar images (42.8%), suspicious microcalcifications with density (39.2%), microcalcifications (31.2%) and nodules (20%). Of the 32 cancers, 16 had inadequate radiological margins that required intraoperating reescision; suitable histopatologic margins in 100% were obtained (16/16). The 16 (62.5%) cancers without intraoperating reescisi6n by suitable radiological margins had suitable histopatologic margins and 37.5% (6/16) inadequate ones that required surgical reinterventionn to control the margins. The discrepancy between margins was related to microcalcifications in 83.3% of the injuries. the intrasurgical radiation control of the surgical piece is effective to evaluate margins; the intrasurgical reescisión changed inadequate margins to suitable in 50% (16/32) of the cancers; only 18.7% (6/32) of the total of cases required another surgery to control the margins.

Survey on the use of CAD-CAM technology by UK and Irish dental technicians.

PubMed

Blackwell, E; Nesbit, M; Petridis, H

2017-05-12

Statement of the problem Digital workflows (CAD/CAM) have been introduced in dentistry during recent years. No published information exists on dental technicians' use and reporting of this technology.Purpose The aim of this cross sectional survey was to identify the extent digital technology has infiltrated the workplace and to investigate the factors affecting the use of CAD-CAM technology by dental laboratory technicians within Ireland and the UK.Materials and methods A web-based questionnaire was composed (Opinio, Object Planet Inc. Oslo, Norway) and distributed to UK and Irish dental technicians. Answers to all questions were anonymous and grouped such that general information was gathered initially, followed by branching of the survey into two sections depending on whether or not the respondent worked with CAD-CAM technology. Results were compiled and statistical analysis (Fisher's Exact test, SPSS, IBM, Armonk, New York, USA) was performed in order to investigate any correlation between various demographic variables and the answers provided.Results The survey was distributed to 760 UK technicians and 77 Irish technicians. The total number of completed surveys was 105, which yielded a total response rate of 14%. Most technicians reported using some form of CAD/CAM aspect in the workflow, and this was more significant for technicians working in large laboratories. Most training received was company-led. Large laboratories were also significantly correlated with less outsourcing of CAD/CAM work and a change in dental material use leading to the increase of zirconia and the decrease of noble alloys. Dental technicians did not report any significant change in working relationships and staffing as a result of CAD/CAM incorporation. High initial investment cost was the most common reason quoted from non-users, along with the lack of such technology in their working environment.

A Comparison of Medication Histories Obtained by a Pharmacy Technician Versus Nurses in the Emergency Department

PubMed Central

Markovic, Marija; Mathis, A. Scott; Ghin, Hoytin Lee; Gardiner, Michelle; Fahim, Germin

2017-01-01

Purpose: To compare the medication history error rate of the emergency department (ED) pharmacy technician with that of nursing staff and to describe the workflow environment. Methods: Fifty medication histories performed by an ED nurse followed by the pharmacy technician were evaluated for discrepancies (RN-PT group). A separate 50 medication histories performed by the pharmacy technician and observed with necessary intervention by the ED pharmacist were evaluated for discrepancies (PT-RPh group). Discrepancies were totaled and categorized by type of error and therapeutic category of the medication. The workflow description was obtained by observation and staff interview. Results: A total of 474 medications in the RN-PT group and 521 in the PT-RPh group were evaluated. Nurses made at least one error in all 50 medication histories (100%), compared to 18 medication histories for the pharmacy technician (36%). In the RN-PT group, 408 medications had at least one error, corresponding to an accuracy rate of 14% for nurses. In the PT-RPh group, 30 medications had an error, corresponding to an accuracy rate of 94.4% for the pharmacy technician (P < 0.0001). The most common error made by nurses was a missing medication (n = 109), while the most common error for the pharmacy technician was a wrong medication frequency (n = 19). The most common drug class with documented errors for ED nurses was cardiovascular medications (n = 100), while the pharmacy technician made the most errors in gastrointestinal medications (n = 11). Conclusion: Medication histories obtained by the pharmacy technician were significantly more accurate than those obtained by nurses in the emergency department. PMID:28090164

Education and training for technicians in photonics-enabled technologies

NASA Astrophysics Data System (ADS)

Hull, Daniel M.; Hull, Darrell M.

2005-10-01

Within a few years after lasers were first made operational in 1960, it became apparent that rapid growth in the applications of this new technology in industry, health care, and other fields would require a new generation of technicians in laser/optics engineering. Technicians are the men and women who work alongside scientists and engineers in bringing their ideas, designs, and processes to fruition. In America, most highly qualified technicians are graduates of associate of applied science (AAS) programs in community and technical colleges (two-year postsecondary institutions). Curricula and educational programs designed to prepare technicians in laser/electro-optics technology (LEOT) emerged in the 1970s; today there are over 15 LEOT programs in the United States producing over 100 LEOT graduates each year.

Surveying Fourth-Year Medical Students Regarding the Choice of Diagnostic Radiology as a Specialty.

PubMed

Arleo, Elizabeth Kagan; Bluth, Edward; Francavilla, Michael; Straus, Christopher M; Reddy, Sravanthi; Recht, Michael

2016-02-01

The aim of this study was to survey fourth-year medical students, both those choosing and those not choosing diagnostic radiology as their specialty, regarding factors influencing their choice of specialty and their perceptions of radiology. A voluntary anonymous online survey hyperlink was sent to 141 US medical schools for distribution to fourth-year students. Topics included demographics, radiology education, specialty choice and influencing factors, and opinions of radiology. A representative sampling (7%) of 2015 fourth-year medical students (n = 1,219; 51% men, 49% women) participated: 7% were applying in radiology and 93% were not. For respondents applying in radiology, the most important factor was intellectual challenge. For respondents applying in nonradiology specialties, degree of patient contact was the most important factor in the decision not to choose radiology; job market was not listed as a top-three factor. Women were less likely than men to apply in radiology (P < .001), with radiology selected by 11.8% of men (56 of 476) and only 2.8% of women (13 of 459). Respondents self-identifying as Asian had a significantly higher (P = .015) likelihood of selecting radiology (19 of 156 [12.2%]) than all other races combined (44 of 723 [6.1%]). Respondents at medical schools with required dedicated medical imaging rotations were more likely to choose radiology as a specialty, but most schools still do not require the clerkship (82%). The reasons fourth-year medical students choose, or do not choose, diagnostic radiology as a specialty are multifactorial, but noncontrollable factors, such as the job market, proved less compelling than controllable factors, such as taking a radiology rotation. Copyright © 2016 American College of Radiology. Published by Elsevier Inc. All rights reserved.

14 CFR 65.80 - Certificated aviation maintenance technician school students.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 2 2013-01-01 2013-01-01 false Certificated aviation maintenance technician school students. 65.80 Section 65.80 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... § 65.80 Certificated aviation maintenance technician school students. Whenever an aviation maintenance...

14 CFR 65.80 - Certificated aviation maintenance technician school students.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 2 2012-01-01 2012-01-01 false Certificated aviation maintenance technician school students. 65.80 Section 65.80 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... § 65.80 Certificated aviation maintenance technician school students. Whenever an aviation maintenance...

14 CFR 65.80 - Certificated aviation maintenance technician school students.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 2 2011-01-01 2011-01-01 false Certificated aviation maintenance technician school students. 65.80 Section 65.80 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... § 65.80 Certificated aviation maintenance technician school students. Whenever an aviation maintenance...

14 CFR 65.80 - Certificated aviation maintenance technician school students.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Certificated aviation maintenance technician school students. 65.80 Section 65.80 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... § 65.80 Certificated aviation maintenance technician school students. Whenever an aviation maintenance...

14 CFR 65.80 - Certificated aviation maintenance technician school students.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 2 2014-01-01 2014-01-01 false Certificated aviation maintenance technician school students. 65.80 Section 65.80 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... § 65.80 Certificated aviation maintenance technician school students. Whenever an aviation maintenance...

Knowledges Commonly Useful in Twelve Allied Health Occupations. Report No. 25. Final Report.

ERIC Educational Resources Information Center

Wallenstien, Robert J.

Forty-eight instructors and forty-one practitioners representing 12 occupations (dental assistant, dental laboratory technician, inhalation therapist, medical assistant, medical records technician, associate degree nurse, practical nurse, occupational therapist, physical therapist, X-ray technician, medical secretary, and medical laboratory…

Certification and Career Success: A LEADS Project

ERIC Educational Resources Information Center

Russ-Eft, Darlene; Dickison, Phil; Levine, Roger

2008-01-01

This study examines the relationship between certification examination test results and Emergency Medical Technician (EMT) career success. The sample was drawn from the Longitudinal Emergency Medical Technician Attributes and Demographics Study (LEADS). LEADS participants were matched with National Registry of Emergency Medical Technician (NREMT)…

Agricultural Biotechnology Technician. National Voluntary Occupational Skill Standards.

ERIC Educational Resources Information Center

National Future Farmers of America Foundation, Madison, WI.

The skill standards in this document were developed as a result of meetings between representatives of the agricultural industry and educational institutions to determine the skills and educational preparation required of an agricultural biotechnology technician, verified by technicians working in laboratories, greenhouses, animal facilities, and…

The Effects of Workload and Working Conditions on Operating Room Nurses and Technicians.

PubMed

Uğurlu, Ziyafet; Karahan, Azize; Ünlü, Hayriye; Abbasoğlu, Aysel; Özhan Elbaş, Nalan; Avcı Işık, Sevcan; Tepe, Aylin

2015-09-01

This study was conducted between August 15 and September 20, 2013, to determine the effects of workload and working conditions on operating room (OR) nurses and technicians. The study sample included 74 OR nurses and technicians working in a private university's six hospitals. The Individual Workload Perception Scale and a questionnaire that collected data on risk and environmental factors were used. The mean age of study participants was 29.3 ± 6.7 years, and 62.2% of the participants were female. More than 90% of the nurses and technicians had experienced spills or splashing of blood or other body fluids; anesthetic gases and radiation had affected 63.5% and 71.6% of nurses and technicians, respectively; 63.5% reported lumbar pain; and 46.6% defined the work environment as very stressful. The average workload scale score was 32.4 ± 6.2 (min = 11, max = 55). OR nurses and technicians are exposed to many occupational risks. © 2015 The Author(s).

Occupational health hazards of working in the interventional laboratory: a multisite case control study of physicians and allied staff.

PubMed

Orme, Nicholas M; Rihal, Charanjit S; Gulati, Rajiv; Holmes, David R; Lennon, Ryan J; Lewis, Bradley R; McPhail, Ian R; Thielen, Kent R; Pislaru, Sorin V; Sandhu, Gurpreet S; Singh, Mandeep

2015-03-03

The occupational hazards of working in the interventional laboratory have been inadequately studied for physicians and remain unaddressed for nonphysician personnel. This study sought to determine whether the prevalence of work-related musculoskeletal pain, cancer, and other medical conditions is higher among physicians and allied staff who work in interventional laboratories compared with employees who do not. Mayo Clinic employees who work in affiliated hospitals with interventional cardiology or interventional radiology laboratories took an electronic survey. Results were stratified on the basis of self-reported occupational exposure to procedures that involve radiation. There were 1,543 employees (mean age 43 ± 11.3 years, 33% male) who responded to the survey (response rate of 57%), and 1,042 (67.5%) reported being involved with procedures utilizing radiation. These employees reported experiencing work-related pain more often than the control group before (54.7% vs. 44.7%; p < 0.001) and after adjustment for age, sex, body mass index, pre-existing musculoskeletal conditions, years in profession, and job description (odds ratio: 1.67; 95% confidence interval: 1.32 to 2.11; p < 0.001). Musculoskeletal pain varied significantly by job description, with the highest incidence reported by technicians (62%) and nurses (60%) followed by attending physicians (44%) and trainees (19%; p < 0.001). There was no difference in cancer prevalence between groups (9% vs. 9%; p = 0.96). Musculoskeletal pain is more common among healthcare workers who participate in interventional procedures and is highest in nonphysician employees. The diagnosis of cancer in employees who participate in procedures that utilize radiation was not elevated when compared to controls within the same departments, although any conclusion regarding causality is limited by the cross-sectional nature of the study, as well as the low overall prevalence of malignancy in our study group. Copyright © 2015 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Outcomes of asymptomatic anastomotic leaks found on routine postoperative water-soluble enema following anterior resection for cancer.

PubMed

Killeen, S; Souroullas, P; Ho Tin, H; Hunter, I A; O'Grady, H; Gunn, J; Hartley, J E

2013-11-01

The incidence and consequence of an anastomotic leak associated with low anterior resection for cancer mandates covering stoma in most cases. A water-soluble enema is often performed to assess anastomotic integrity prior to stoma reversal. The functional outcome following reversal in patients with occult radiologically detected leaks is poorly defined. The goal of the present study was to determine the functional outcome in patients with a radiologically detected anastomotic leak who subsequently underwent stoma reversal. This case control study used patients with and without radiologically detected occult anastomotic leak having undergone reversal of covering stomata. The study group was matched with controls for age, gender, procedure, tumor stage, and adjuvant/neoadjuvant therapy. Validated fecal incontinence quality of life (FIQL), Cleveland Clinic Fecal Incontinence Score (CCFIS), and the Memorial Sloan-Kettering Cancer Center (MSKCC) Bowel Function Index (BFI) were used. Patient satisfaction, medication use, and ancillary procedures prior to closure were also recorded. Thirteen patients with radiologically detected occult anastomotic leaks and 13 matched controls were identified from a prospectively maintained database. The FIQL, CCFIS, and MSKCC BFI scores were significantly reduced in those with occult leaks. The mean number of radiological and surgical interventions was significantly greater in the patients with occult leaks. Antidiarrheal and bulking agent use, as well as patient satisfaction, were the same for both groups. Only one patient in the occult leak group would not undergo stoma reversal again. Reversal of a defunctioning ileostomy in the presence of an occult radiological leak can be associated with poorer functional outcomes, but patient satisfaction is undiminished.

5 CFR 842.503 - Eligibility for annuity supplement.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 842.07 governing early retirement for air traffic controllers; (6) Section 842.208 governing early retirement for law enforcement officers; (7) Section 842.209 governing early retirement for Members of Congress; (8) Section 842.210 governing early retirement for military reserve technicians; or (9) Section...

5 CFR 842.503 - Eligibility for annuity supplement.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 842.07 governing early retirement for air traffic controllers; (6) Section 842.208 governing early retirement for law enforcement officers; (7) Section 842.209 governing early retirement for Members of Congress; (8) Section 842.210 governing early retirement for military reserve technicians; or (9) Section...

5 CFR 842.503 - Eligibility for annuity supplement.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 842.07 governing early retirement for air traffic controllers; (6) Section 842.208 governing early retirement for law enforcement officers; (7) Section 842.209 governing early retirement for Members of Congress; (8) Section 842.210 governing early retirement for military reserve technicians; or (9) Section...

5 CFR 842.503 - Eligibility for annuity supplement.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 842.07 governing early retirement for air traffic controllers; (6) Section 842.208 governing early retirement for law enforcement officers; (7) Section 842.209 governing early retirement for Members of Congress; (8) Section 842.210 governing early retirement for military reserve technicians; or (9) Section...

5 CFR 842.503 - Eligibility for annuity supplement.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 842.07 governing early retirement for air traffic controllers; (6) Section 842.208 governing early retirement for law enforcement officers; (7) Section 842.209 governing early retirement for Members of Congress; (8) Section 842.210 governing early retirement for military reserve technicians; or (9) Section...

Introduction to Instrumentation. Teacher Edition.

ERIC Educational Resources Information Center

Brown, A. O., III

This module contains instructional materials on instrumentation to help teachers train students in the job skills they will need as beginning instrumentation technicians. The module addresses the nature of accessing, measuring, and controlling phenomena such as level, flow, pressure, and temperature. Students are introduced to the devices and…

40 CFR 745.90 - Renovator certification and dust sampling technician certification.

Code of Federal Regulations, 2014 CFR

2014-07-01

... AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN... certified renovator. (3) Individuals who have successfully completed an accredited lead-based paint... are currently certified as lead-based paint inspectors or risk assessors may act as certified dust...

40 CFR 745.90 - Renovator certification and dust sampling technician certification.

Code of Federal Regulations, 2013 CFR

2013-07-01

... AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN... certified renovator. (3) Individuals who have successfully completed an accredited lead-based paint... are currently certified as lead-based paint inspectors or risk assessors may act as certified dust...

40 CFR 745.90 - Renovator certification and dust sampling technician certification.

Code of Federal Regulations, 2012 CFR

2012-07-01

... AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN... certified renovator. (3) Individuals who have successfully completed an accredited lead-based paint... are currently certified as lead-based paint inspectors or risk assessors may act as certified dust...

KENNEDY SPACE CENTER, FLA. - During power-up of the orbiter Discovery in the Orbiter Processing Facility, a technician moves a switch. Discovery has been undergoing Orbiter Major Modifications in the past year, ranging from wiring, control panels and black boxes to gaseous and fluid systems tubing and components. These systems were deserviced, disassembled, inspected, modified, reassembled, checked out and reserviced, as were most other systems onboard. The work includes the installation of the Multifunction Electronic Display Subsystem (MEDS) - a state-of-the-art “glass cockpit.”

NASA Image and Video Library

2003-08-27

KENNEDY SPACE CENTER, FLA. - During power-up of the orbiter Discovery in the Orbiter Processing Facility, a technician moves a switch. Discovery has been undergoing Orbiter Major Modifications in the past year, ranging from wiring, control panels and black boxes to gaseous and fluid systems tubing and components. These systems were deserviced, disassembled, inspected, modified, reassembled, checked out and reserviced, as were most other systems onboard. The work includes the installation of the Multifunction Electronic Display Subsystem (MEDS) - a state-of-the-art “glass cockpit.”

KENNEDY SPACE CENTER, FLA. - During power-up of the orbiter Discovery in the Orbiter Processing Facility, a technician turns on a switch. Discovery has been undergoing Orbiter Major Modifications in the past year, ranging from wiring, control panels and black boxes to gaseous and fluid systems tubing and components. These systems were deserviced, disassembled, inspected, modified, reassembled, checked out and reserviced, as were most other systems onboard. The work includes the installation of the Multifunction Electronic Display Subsystem (MEDS) - a state-of-the-art “glass cockpit.”

NASA Image and Video Library

2003-08-27

KENNEDY SPACE CENTER, FLA. - During power-up of the orbiter Discovery in the Orbiter Processing Facility, a technician turns on a switch. Discovery has been undergoing Orbiter Major Modifications in the past year, ranging from wiring, control panels and black boxes to gaseous and fluid systems tubing and components. These systems were deserviced, disassembled, inspected, modified, reassembled, checked out and reserviced, as were most other systems onboard. The work includes the installation of the Multifunction Electronic Display Subsystem (MEDS) - a state-of-the-art “glass cockpit.”

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, Japanese astronaut Koichi Wakata, dressed in blue protective clothing (at right), looks at the inside of the Pressurized Module, or PM, part of the Japanese Experiment Module (JEM), along with technicians. The PM provides a shirt-sleeve environment in which astronauts on the International Space Station can conduct microgravity experiments. There are a total of 23 racks, including 10 experiment racks, inside the PM providing a power supply, communications, air conditioning, hardware cooling, water control and experiment support functions.

NASA Image and Video Library

2003-09-24

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, Japanese astronaut Koichi Wakata, dressed in blue protective clothing (at right), looks at the inside of the Pressurized Module, or PM, part of the Japanese Experiment Module (JEM), along with technicians. The PM provides a shirt-sleeve environment in which astronauts on the International Space Station can conduct microgravity experiments. There are a total of 23 racks, including 10 experiment racks, inside the PM providing a power supply, communications, air conditioning, hardware cooling, water control and experiment support functions.

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, Japanese astronaut Koichi Wakata (top left) and technicians watch as a tray is extended from inside the Pressurized Module, or PM, part of the Japanese Experiment Module (JEM). The PM provides a shirt-sleeve environment in which astronauts on the International Space Station can conduct microgravity experiments. There are a total of 23 racks, including 10 experiment racks, inside the PM providing a power supply, communications, air conditioning, hardware cooling, water control and experiment support functions.

NASA Image and Video Library

2003-09-24

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, Japanese astronaut Koichi Wakata (top left) and technicians watch as a tray is extended from inside the Pressurized Module, or PM, part of the Japanese Experiment Module (JEM). The PM provides a shirt-sleeve environment in which astronauts on the International Space Station can conduct microgravity experiments. There are a total of 23 racks, including 10 experiment racks, inside the PM providing a power supply, communications, air conditioning, hardware cooling, water control and experiment support functions.

Radiological Control Center (RADCC) Renaming Ceremony

NASA Image and Video Library

2017-03-31

Myrna Scott holds a replica of the emblem noting that the Radiological Control Center at NASA's Kennedy Space Center has been named in honor of her husband, Randy Scott who died last year. A ceremony honored the extensive contributions of Randy Scott. A professional health physicist of more than 40 years, Scott served as the Florida spaceport's Radiation Protection Officer for 14 years until his death June 17, 2016.

Emergency Medical Technician.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document, which is designed for use in developing a tech prep competency profile for the occupation of emergency medical technician, lists technical competencies and competency builders for 18 units pertinent to the health technologies cluster in general and 4 units specific to the occupation of emergency medical technician. The following…

Dental Laboratory Technician.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document, which is designed for use in developing a tech prep competency profile for the occupation of dental laboratory technician, lists technical competencies and competency builders for 13 units pertinent to the health technologies cluster in general and 8 units to the occupation of dental laboratory technician. The following skill areas…

Medical Laboratory Technician.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document, which is designed for use in developing a tech prep competency profile for the occupation of medical laboratory technician, lists technical competencies and competency builders for 18 units pertinent to the health technologies cluster in general and 8 units specific to the occupation of medical laboratory technician. The following…

[The subject matters concerned with use of simplified analytical systems from the perspective of the Japanese Association of Medical Technologists].

PubMed

Morishita, Y

2001-05-01

The subject matters concerned with use of so-called simplified analytical systems for the purpose of useful utilizing are mentioned from the perspective of a laboratory technician. 1. The data from simplified analytical systems should to be agreed with those of particular reference methods not to occur the discrepancy of the data from different laboratories. 2. Accuracy of the measured results using simplified analytical systems is hard to be scrutinized thoroughly and correctly with the quality control surveillance procedure on the stored pooled serum or partly-processed blood. 3. It is necessary to present the guide line to follow about the contents of evaluation to guarantee on quality of simplified analytical systems. 4. Maintenance and manual performance of simplified analytical systems have to be standardized by a laboratory technician and a selling agent technician. 5. It calls attention, further that the cost of simplified analytical systems is much expensive compared to that of routine method with liquid reagents. 6. Various substances in human serum, like cytokine, hormone, tumor marker, and vitamin, etc. are also hoped to be measured by simplified analytical systems.

Technician-free system for image-guided bronchoscopy

NASA Astrophysics Data System (ADS)

Khare, Rahul; Bascom, Rebecca; Higgins, William E.

2013-03-01

Previous studies have shown that guidance systems improve accuracy and reduce skill variation among physicians during bronchoscopy. However, most of these systems suffer from one or more of the following limitations: 1) an attending technician must carefully keep the system position synchronized with the bronchoscope position during the procedure; 2) extra bronchoscope tracking hardware may be required; 3) guidance cannot take place in real time; 4) the guidance system is unable to detect and correct faulty bronchoscope maneuvers; and 5) a resynchronization procedure must be followed after adverse events such as patient cough or dynamic airway collapse. Here, we propose an image-based system for technician-free bronchoscopy guidance that relies on two features. First, our system precomputes a guidance plan that suggests natural bronchoscope maneuvers at every bifurcation leading toward a region of interest (ROI). Second, our system enables bronchoscope position verification that relies on a global-registration algorithm to establish the global bronchoscope position and, thus, provide the physician with updated navigational information during bronchoscopy. The system can handle general navigation to an ROI, as well as adverse events, and is directly controlled by the physician by a foot pedal. Guided bronchoscopy results using airway-tree phantoms and human cases demonstrate the efficacy of the system.

Radiology Preparedness in Ebola Virus Disease: Guidelines and Challenges for Disinfection of Medical Imaging Equipment for the Protection of Staff and Patients

PubMed Central

Palmore, Tara N.; Folio, Les R.; Bluemke, David A.

2015-01-01

The overlap of early Ebola virus disease (EVD) symptoms (eg, fever, headache, abdominal pain, diarrhea, emesis, and fatigue) with symptoms of other more common travel-related diseases (eg, malaria, typhoid fever, pneumonia, and meningococcemia) may result in delayed diagnosis of EVD before isolation of infected patients. Radiology departments should consider policies for and approaches to decontamination of expensive and potentially easily damaged radiology equipment. In addition, the protection of radiology personnel must be considered during the work-up phase of undiagnosed EVD patients presenting to emergency departments. The purpose of this article is to consider the effect of EVD on radiology departments and imaging equipment, with particular consideration of guidelines currently available from the Centers for Disease Control and Prevention that may be applicable to radiology. © RSNA, 2015 PMID:25654616

Level of Motivation Amongst Health Personnel Working in A Tertiary Care Government Hospital of New Delhi, India

PubMed Central

Jaiswal, Poonam; Singhal, Ashok K.; Gadpayle, Adesh K.; Sachdeva, Sandeep; Padaria, Rabindra

2014-01-01

Aims: To assess the level and factors of motivation amongst permanent government employees working in a tertiary health care institution. Material and Methods: A sample of 200 health personnel (50 in each category) i.e. doctors, nurses, technician, and support staff were contacted through face to face interview. Motivation was measured as the degree to which an individual possessed various identified motivation domains like Drive, Control, Challenge, Relationship and Rewards. Each domain was represented by 4 dimensions- accordingly a closed-ended statement represented each of these dimensions and responses were assessed on a Likert based scale. Data management was done using SPSS, ver. 19. Results: The average age for different health personnel were: Doctors 48.68 (±8.53), nurses 40.72 (±7.76), technician 38.4 (±10.65) and support staff 43.24 (±9.52) years. The average year of work experience was: Doctor 19.09 (±9.77), nurses 17.2 (±8.420), technician 14.84 (±10.45), support staff 18.24 (±10.28). A comparison of overall motivation index (mean score) revealed that nurse had highest level (3.47), followed by support staff (3.46), doctor (3.45) and technician (3.43). Based on their individual mean scores, the healthcare providers were categorised into three different levels of motivation and it was found that majority of the health personnel i.e.70% of support staff, 62% nurse, 56% doctor and technician, had high to very high level of motivation index. The mean scores for all the five factors as well as their respective ranks were also found out and it was deduced that “relationship” assumed first rank for doctors (mean score: 3.71) and technician (mean score: 3.75), whereas “control” assumed greatest significance for nurses (mean score, 3.62) and support staff (mean scores, 3.61). Based upon the mean scores, “reward” assumed third rank among all the four categories. Kruskal-Wallis test was applied to test if the different categories of health personnel varied with respect to five factors of motivation and it was found that their orientation towards the various motivational components differed significantly only with respect to Drive (P < 0.01). Conclusion: There is scope for enhancing staff motivation. PMID:25364148

Electric Vehicle Technician

ERIC Educational Resources Information Center

Moore, Pam

2011-01-01

With President Obama's goal to have one million electric vehicles (EV) on the road by 2015, the electric vehicle technician should have a promising and busy future. "The job force in the car industry is ramping up for a revitalized green car industry," according to Greencareersguide.com. An electric vehicle technician will safely troubleshoot and…

Instructor Quality Affecting Emergency Medical Technician (EMT) Preparedness: A LEADS Project

ERIC Educational Resources Information Center

Russ-Eft, Darlene F.; Dickison, Philip D.; Levine, Roger

2005-01-01

This represents one of a series of studies of the Longitudinal Emergency Medical Technician Attributes and Demographics Study (LEADS) being undertaken by the National Registry of Emergency Medical Technicians and the National Highway Traffic Safety Administration (NHTSA). This secondary analysis of the LEADS database, which provides a…

Raising the Standard. Electronics Technician Skills for Today and Tomorrow.

ERIC Educational Resources Information Center

Electronic Industries Foundation, Washington, DC.

This manual identifies the standard skills required of a work-ready, entry-level electronics technician. It provides a valuable resource for these groups: students considering careers as electronics technicians; for counselors, educators, and administrators; and for employers. An introduction discusses use of the standards and includes two lists…

Guide for Training Medical Laboratory Technicians. Fourth Edition.

ERIC Educational Resources Information Center

American Medical Technologists, Park Ridge, IL.

This document is intended to assist educators in the development of medical laboratory technician training programs. The following elements are included in the document: (1) an introduction; (2) the American Medical Technologists' Code of Ethics; (3) suggested curricula for medical laboratory technician programs for a 12-month course and an…

Fiber Optics Technician. Curriculum Research Project. Final Report.

ERIC Educational Resources Information Center

Whittington, Herschel K.

A study examined the role of technicians in the fiber optics industry and determined those elements that should be included in a comprehensive curriculum to prepare fiber optics technicians for employment in the Texas labor market. First the current literature, including the ERIC database and equipment manufacturers' journals were reviewed. After…

NHEXAS PHASE I MARYLAND STUDY--STANDARD OPERATING PROCEDURE FOR TRAINING OF FIELD TECHNICIANS (G07)

EPA Science Inventory

The purpose of this SOP is to describe the method used for training field technicians. The SOP outlines the responsibilities of the Field Technician (FT) and the Field Coordination Center Supervisor (FCC-S) before, during, and after sampling at residences, and the training syste...

Cognitive Processes Embedded in Self-Explanations of Solving Technical Problems: Implications for Training

ERIC Educational Resources Information Center

Maughan, George R.

2007-01-01

This qualitative research examines the cognitive processes embedded in self-explanations of automobile and motorcycle service technicians performing troubleshooting tasks and solving technical problems. In-depth interviews were conducted with twelve service technicians who have obtained the designation of "master technician" or equivalent within…

Evaluating Three Allied Health Training Programs: Exploratory Research into Curriculum Relevance and Labor Market Conditions

ERIC Educational Resources Information Center

Appel, Gary L.; And Others

1977-01-01

Presents results of a research effort designed to develop a methodology for assisting dietetic technicians, physical therapist assistants, and medical record technicians curriculum relevance, and to better understand labor market conditions affecting the utilization and distribution of midlevel technicians. (Author/LAS)

The Operating Technician's Role in Video Distance Learning.

ERIC Educational Resources Information Center

Olesinski, Raymond L.; And Others

Operating technicians play a number of roles in video, or televised, distance learning programs, the most obvious being the operation and support of the technology itself. Very little information exists, however, about the non-technical activities of technicians that may influence the instruction process. This paper describes these activities…

Auto Collision Technician: An Instructional Guide for Teachers.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This guide is designed to help teachers in auto collision technician programs for grades 11 and 12 teach the critical competencies of the program. The critical competencies covered are the High Priority-Individual (HP-I) competencies in Ohio's Occupational Competency Assessment Profile (OCAP) for Auto Collision Technician. HP-I competencies are…

Auto Technician: An Instructional Guide for Teachers.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This guide is designed to help teachers in automotive technician programs for grades 11 and 12 teach the critical competencies of the program. The critical competencies covered are the Priority 1 competencies in Ohio Occupational Competency Assessment Profile (OCAP) for Automotive Technician. Teacher materials include program/instructor resources,…

Standards for Medical Library Technicians, Medical Library Association.

ERIC Educational Resources Information Center

Medical Library Association, Chicago, IL.

A medical library technician is a semiprofessional library employee whose duties require knowledge and skill based on a minimum of two years' general college education that includes library instruction beyond the clerical level. The medical library technician must have a practical knowledge of library functions and services, an understanding of…

Veterinary Technician Program Director Leadership Style and Program Success

ERIC Educational Resources Information Center

Renda-Francis, Lori A.

2012-01-01

Program directors of American Veterinary Medical Association (AVMA) accredited veterinary technician programs may have little or no training in leadership. The need for program directors of AVMA-accredited veterinary technician programs to understand how leadership traits may have an impact on student success is often overlooked. The purpose of…

75 FR 80567 - Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-22

... Aviation Maintenance Technician Schools meet the minimum requirements for procedures and curriculum set forth by the FAA in FAR Part 147. Applicants submit FAA Form 8310-6, Aviation Maintenance Technician... FAR Part 147 requirements have been met, an aviation maintenance technician school certificate with...

OSU-Okmulgee's Orthotics and Prosthetics Technician Program Thrives

ERIC Educational Resources Information Center

Smith, Sharon

2007-01-01

Students in the Orthotics and Prosthetics Technician Program at Oklahoma State University (OSU)-Okmulgee are provided with opportunities to develop multiple skill sets coveted by employers that will land them jobs in the industry as technicians, fitters or pedorthists. The program was recently restructured to become a technically based orthotic…

A Task Analysis of Selected Nuclear Technician Occupations.

ERIC Educational Resources Information Center

Braden, Paul V.; Paul, Krishan K.

A task analysis of nuclear technician occupations in selected organizations in the Southern Interstate Nuclear Board Region was conducted as part of a research and development project leading to a nuclear technician manpower information system for these 17 states. In order to answer 11 questions focusing on task performance frequency and…

Apprenticeship and Training Policy for Dental Laboratory Technicians.

ERIC Educational Resources Information Center

National Association of Dental Labs., Inc., Washington, DC.

The dental technician performs completely one or more specialized areas of the dental laboratory procedures required in the creation of a dental appliance. Policies of the 8000 hour apprenticeship program are explained in terms of qualifications, apprenticeship terms and agreement, ratio of apprentices to technicians, probationary period, credit…

A survey of needle handling practices and needlestick injuries in veterinary technicians.

PubMed

Weese, J Scott; Faires, Meredith

2009-12-01

A survey of veterinary technicians identified that needlestick injuries are very common, with 210/226 (93%) technicians reporting at least one needlestick injury over the course of their career. One hundred sixty-seven (74%) had experienced a needlestick injury during the preceding year. Exposure to animal blood and various drugs was common. It was particularly concerning that needlestick injuries involving chemotherapeutic agents and prostaglandin were reported. Eight (3.5%) technicians had required medical care for a needlestick injury and 2 (0.8%) had lost time at work. The approach to sharps handling and needlestick injury avoidance was poor and most needlestick injuries had not been reported to employers. Measures need to be undertaken to improve sharps handling practices to reduce the number of needlestick injuries among veterinary technicians.

Technicians test OV-102's aft fuselage LRU hydrogen recirculation pump

NASA Technical Reports Server (NTRS)

1990-01-01

Donald C. Buckner, a Lockheed mechanical lead technician, installs an aft fuselage line replaceable unit (LRU) liquid hydrogen recirculation pump from Columbia, Orbiter Vehicle (OV) 102 into JSC's Thermochemical Test Area (TTA) Support Laboratory Bldg 350 test stand. Technicians ran the pump package through the battery of leak tests. Preliminary indications showed only minor, acceptable leakage from the package and Kennedy Space Center (KSC) technicians have replaced a crushed seal on the prevalve of the main propulsion system they believe may have caused the STS-35 hydrogen leak. In addition to Buckner, (left to right) Larry Kilbourn, a Rockwell Service Center lead mechanical technician from Cape Canaveral, and John Dickerson, a quality inspector with EBASCO Services, also monitored the test at JSC. Photo taken by JSC photographer Benny Benavides.

Pharmacist and Technician Perceptions of Tech-Check-Tech in Community Pharmacy Practice Settings.

PubMed

Frost, Timothy P; Adams, Alex J

2018-04-01

Tech-check-tech (TCT) is a practice model in which pharmacy technicians with advanced training can perform final verification of prescriptions that have been previously reviewed for appropriateness by a pharmacist. Few states have adopted TCT in part because of the common view that this model is controversial among members of the profession. This article aims to summarize the existing research on pharmacist and technician perceptions of community pharmacy-based TCT. A literature review was conducted using MEDLINE (January 1990 to August 2016) and Google Scholar (January 1990 to August 2016) using the terms "tech* and check," "tech-check-tech," "checking technician," and "accuracy checking tech*." Of the 7 studies identified we found general agreement among both pharmacists and technicians that TCT in community pharmacy settings can be safely performed. This agreement persisted in studies of theoretical TCT models and in studies assessing participants in actual community-based TCT models. Pharmacists who had previously worked with a checking technician were generally more favorable toward TCT. Both pharmacists and technicians in community pharmacy settings generally perceived TCT to be safe, in both theoretical surveys and in surveys following actual TCT demonstration projects. These perceptions of safety align well with the actual outcomes achieved from community pharmacy TCT studies.

A Feasibility Study of Youth Apprenticeship in Arkansas.

ERIC Educational Resources Information Center

Jobs for the Future, Inc., West Somerville, MA.

A study assessed the feasibility and attractiveness of youth apprenticeship in Arkansas in over 80 interviews with employers in 5 key Arkansas industries and occupations. They were allied health, food processing (equipment repair and maintenance and lab technician/quality control), information services, metalworking, and self-employment and…

14 CFR Appendix D to Part 147 - Powerplant Curriculum Subjects

Code of Federal Regulations, 2010 CFR

2010-01-01

... (CONTINUED) SCHOOLS AND OTHER CERTIFICATED AGENCIES AVIATION MAINTENANCE TECHNICIAN SCHOOLS Pt. 147, App. D... engine temperature, pressure, and r.p.m. indicating systems. b. engine fire protection systems (3) 11... repair heat exchangers, superchargers, and turbine engine airflow and temperature control systems. (3) 28...

Does Your Technology Support Measure Up?

ERIC Educational Resources Information Center

Abramson, Paul

1998-01-01

Provides tips on ways to keep computer systems in colleges and universities from failing while also controlling costs. Trinity College (Hartford) is used to illustrate how proper staffing, system maintenance, hardware purchasing decisions, technician compensation, and the use of students for maintenance work can effectively support a school's…

A comparison of the job attitudes and interest patterns of air traffic and airway facility personnel.

DOT National Transportation Integrated Search

1979-03-01

Air traffic control specialists (ATCSs) and airway facility technicians (AFTs) were compared on measures of job attitudes and interests. A total of 792 ATCSs and 2,366 AFTs completed the Strong Vocational Interest Blank (SVIB) and questionnaires conc...

Sensitivity of autopsy and radiological examination in detecting bone fractures in an animal model: implications for the assessment of fatal child physical abuse.

PubMed

Cattaneo, C; Marinelli, E; Di Giancamillo, A; Di Giancamillo, M; Travetti, O; Vigano', L; Poppa, P; Porta, D; Gentilomo, A; Grandi, M

2006-12-20

Skeletal injuries are often strong indicators of child abuse and their detection is therefore crucial. The aim of this study was to compare the sensitivity of three diagnostic approaches, namely autopsy, traditional (conventional) radiology, and computed tomography on "battered" piglets, in order to verify the sensitivity of each method, with respect to the true number of bone fractures assessed once the piglet was skeletonised (osteological control). Four newborn cadaver piglets who had died from natural causes were severely beaten post-mortem in every district of the body. Traditional radiography, computed tomography (CT) and autopsy were performed. The piglet was then macerated until skeletonised and the number of all fractures present recorded (osteological control). On the cranium, traditional radiology revealed only 35% circa of actual fractures, autopsy detected only 31% (P<0.01 for both comparisons versus osteological control), whereas CT imaging detected all fractures actually present. For ribs, radiology detected only 47% of all fractures present, and autopsy 65% circa (P>0.05 for both comparisons versus osteological control), while CT scans detected 34% (P<0.01). In suspected cases of fatal child abuse, we suggest that the bones of specific districts be directly analysed either at autopsy or by collecting specific diagnostic sites, such as parts of the rib cage, and subjecting them to maceration. The removed areas could be replaced with artificial material for cosmetic purposes. The authors stress the importance of combined radiological, CT scan, autopsy and osteological survey in the detection of perimortem bone fractures.

Emergency management and infection control in a radiology department during an outbreak of severe acute respiratory syndrome.

PubMed

Lin, Y C; Dong, S L; Yeh, Y H; Wu, Y S; Lan, G Y; Liu, C M; Chu, T C

2005-07-01

The World Health Organization classified Taiwan as a serious epidemic-stricken area when the extent of severe acute respiratory syndrome (SARS) in Taiwan became clear. As of 11 July 2003, 671 probable SARS cases had been identified in Taiwan and 7 healthcare workers had died from the disease. Radiographers were easily infected by SARS because they had close contact with suspected or probable cases while conducting chest X-ray examinations. Three radiographers had been infected by the end of May 2003. Because of the impact of SARS on the Radiology Department, the department established a SARS emergency infection control team and re-designed the department's infection-control and emergency-management procedures based on the concept of risk-grade protection. This effort included installing a radiographic room at the fever-screening station, re-allocating human resources in the Radiology Department, training the department staff in infection control, and drafting new operational procedures for radiographers conducting X-ray examinations on SARS patients. The goal of this program was to reduce the infection rate and distribute materials efficiently in the department. This article introduces the emergency-management procedure of the Radiology Department during the SARS outbreak and the infection-protection experience of the department staff.

Approaching the Practice Quality Improvement Project in Interventional Radiology.

PubMed

Reis, Stephen P; White, Benjamin; Sutphin, Patrick D; Pillai, Anil K; Kalva, Sanjeeva P; Toomay, Seth M

2015-12-01

An important component of maintenance of certification and quality improvement in radiology is the practice quality improvement (PQI) project. In this article, the authors describe several methodologies for initiating and completing PQI projects. Furthermore, the authors illustrate several tools that are vital in compiling, analyzing, and presenting data in an easily understandable and reproducible manner. Last, they describe two PQI projects performed in an interventional radiology division that have successfully improved the quality of care for patients. Using the DMAIC (define, measure, analyze, improve, control) quality improvement framework, interventional radiology throughput has been increased, to lessen mediport wait times from 43 to 8 days, and mediport infection rates have decreased from more than 2% to less than 0.4%. Copyright © 2015 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Beliefs about inhaled corticosteroids: Comparison of community pharmacists, pharmacy technicians and patients with asthma.

PubMed

Driesenaar, Jeanine A; De Smet, Peter A G M; van Hulten, Rolf; Horne, Rob; Zwikker, Hanneke; van den Bemt, Bart; van Dulmen, Sandra

2016-12-01

To compare pharmacists' and pharmacy technicians' perceptions of patients' beliefs regarding inhaled corticosteroids (ICS) with those of patients and to compare the ICS beliefs of pharmacists and technicians with those of patients with asthma. 1269 community pharmacies were approached to fill out an online questionnaire; 1952 patients were sent a questionnaire by post. Beliefs (i.e., necessity and concerns) regarding ICS were measured using (an adapted version of) the Beliefs about Medicines Questionnaire (BMQ-specific). Pharmacists and technicians were instructed to fill out the BMQ for themselves, and to fill it out in the way they thought most of their patients would complete it. 136 pharmacists, 90 pharmacy technicians and 161 patients with asthma completed the questionnaire. Pharmacists and technicians thought patients had more concerns about ICS than patients themselves reported (p < 0.0001). They also thought that patients had stronger beliefs in their personal need for ICS than patients reported (p < 0.01). Pharmacists reported lower levels of concerns than patients (p < 0.05) and both providers attributed a higher level of necessity to ICS than patients did (p < 0.0001). Pharmacists and technicians overestimate the personal need for treatment as well as the concerns patients with asthma have regarding ICS. They also have, to some extent, stronger positive beliefs about ICS than patients. If pharmacists and technicians expect that patients share their positive views about ICS, they might be less likely to elicit and address patients' doubts and concerns about ICS, which might be relevant for effective ICS treatment and subsequent patient outcomes.

Computer Programs For Automated Welding System

NASA Technical Reports Server (NTRS)

Agapakis, John E.

1993-01-01

Computer programs developed for use in controlling automated welding system described in MFS-28578. Together with control computer, computer input and output devices and control sensors and actuators, provide flexible capability for planning and implementation of schemes for automated welding of specific workpieces. Developed according to macro- and task-level programming schemes, which increases productivity and consistency by reducing amount of "teaching" of system by technician. System provides for three-dimensional mathematical modeling of workpieces, work cells, robots, and positioners.

A STUDY OF RECOMMENDATIONS FOR TECHNICAL EDUCATION CURRICULA.

ERIC Educational Resources Information Center

ARNOLD, JOSEPH P.

THE PRIMARY PURPOSE OF THIS STUDY WAS TO HAVE MANAGEMENT PERSONNEL AND TECHNICIANS IDENTIFY CORES OF SUBJECT MATTER RELATED TO TECHNICIAN JOB PERFORMANCE AND TO DIFFERENTIATE BETWEEN THEIR JUDGMENTS. FIFTY-TWO TECHNICIANS AND 116 MANAGEMENT PERSONNEL IN 52 ILLINOIS FIRMS EMPLOYING 200 OR MORE PERSONS PARTICIPATED. A 99-CARD CURRICULUM DECK,…

Aviation Electronics Technician 3 and 2. Rate Training Manual.

ERIC Educational Resources Information Center

Bureau of Naval Personnel, Washington, DC.

The manual is designed as a self-study text for use by personnel of the Navy and Naval Reserve who are preparing to meet professional requirements for advancement in the rating of Aviation Electronics Technician. The document opens with a review of leadership and qualifications for the Aviation Electronics Technician rating. Other chapters cover…

Work Force Preparation for Technician-Level Occupations.

ERIC Educational Resources Information Center

Harmon, Hobart L.

The Tech Prep Associate Degree (TPAD) program must be clearly focused on technician-level occupations, which are expected to have the greatest occupational growth. Generally, the preparation required to enter the work force at the technician level is completion of an associate degree program that includes 50 percent theory and 50 percent applied…

Job-Oriented Basic Skills (JOBS) Program for the Acoustic Sensor Operations Strand.

ERIC Educational Resources Information Center

U'Ren, Paula Kabance; Baker, Meryl S.

An effort was undertaken to develop a job-oriented basic skills curriculum appropriate for the acoustic sensor operations area, which includes members of four ratings: ocean systems technician, aviation antisubmarine warfare operator, sonar technician (surface), and sonar technician (submarine). Analysis of the job duties of the four ratings…

Development of Curricula for Nuclear Radiation Protection, Nuclear Instrumentation, and Nuclear Materials Processing Technologies. Final Report.

ERIC Educational Resources Information Center

Hull, Daniel M.

A study was conducted to assist two-year postsecondary educational institutions in providing technical specialty courses for preparing nuclear technicians. As a result of project activities, curricula have been developed for five categories of nuclear technicians and operators: (1) radiation protection technician, (2) nuclear instrumentation and…

Materials and Fabrication Methods II. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Lindberg, Andrew; Bay, Robert

This study guide is part of a program of studies entitled Science and Engineering Technician (SET) Curriculum. The SET Curriculum integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology, and electronic technology with the objective of training technicians in the use of electronic instruments and their…

Chemical Science and Technology I. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Ballinger, Jack T.; Wolf, Lawrence J.

This study guide is part of an interdisciplinary program of studies entitled the Science and Engineering Technician (SET) Curriculum. This curriculum integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology, and electronic technology with the objective of training technicians in the use of electronic…

Energy Management Technician Curriculum Development. Final Report.

ERIC Educational Resources Information Center

Sarvis, Robert E.

This document is the result of an effort to develop a comprehensive curriculum to train community college students as energy management technicians. The main body of the document contains the energy management technician training curriculum and course content for the proposed courses in the two-year sequence; a report of how the curriculum was…

Examining Career Success of Minority and Women Emergency Medical Technicians (EMTs): A LEADS Project

ERIC Educational Resources Information Center

Russ-Eft, Darlene F.; Dickison, Philip D.; Levine, Roger

2008-01-01

Emergency medical technicians (EMTs) are a critical segment in prehospital medical care. This study examined EMT-paramedic career success focused on minorities and women, as part of the Longitudinal Emergency Medical Technician Attributes and Demographics Study (LEADS). The LEADS data come from a representative sampling of EMTs throughout the…

An Occupational Survey of Refrigeration Technicians Aiming at Determining Psychomotor Competencies in Turkish Vocational Higher Education System

ERIC Educational Resources Information Center

Isik, Nurettin; Onat, Ayhan

2004-01-01

In this study of "Occupational Survey of Refrigeration Technicians" in which the "Task Inventory Questionnaires" have been developed, we aim at determining the vocational psychomotor competencies (skills) of refrigeration technicians for effectively carrying out the occupational duties in labor-life. In the first phase of the…

Physical Science Experiments for Scientific Glassblowing Technicians.

ERIC Educational Resources Information Center

Tillis, Samuel E.; Donaghay, Herbert C.

The twenty experiments in this text have been designed to give the scientific glassblowing technician the opportunity to use scientific glass apparatus in the study of physical science. Primary emphasis of these experiments is on the practical application of the physical science program as a working tool for the scientific glassblowing technician.…

The Relationship of Academic Courses to Skills Required of Automobile Repair Technicians

ERIC Educational Resources Information Center

Freund, Stephen H.

2013-01-01

The primary objective was to show the important need of academic skills, specifically general education coursework, to the effectiveness of the technician's expertise in the field of automobile repair. Additionally, I emphasized that one of the keys to the quality of the technician's education is the method of instruction analyzed through…

Science and Engineering Technician Curriculum Development Project. Final Report.

ERIC Educational Resources Information Center

Mowery, Donald R.; Wolf, Lawrence J.

Project SET (Science and Engineering for Technicians) developed a series of study guides designed to teach generic science and engineering skills to students interested in becoming technicians. An entire 2-year curriculum is encompassed by these guides, geared for 2-year college students. Described in this final report are the project's rationale,…

Technicians, Education and Equity--With the Benefit of Foresight?

ERIC Educational Resources Information Center

Imrie, Bradford W.

This paper considers the sources and education of an adequate supply of technicians to ensure New Zealand's technological future. It deals with such questions as the source of technicians, and what their learning experiences and outcomes should be. Included in the paper are specific sections dealing with: (1) "Authority for Advanced…

Task Analysis and Job Descriptions for Robotics/Automated Systems Technicians. Final Report. Volume 1.

ERIC Educational Resources Information Center

Hull, Daniel M.; Lovett, James E.

The Robotics/Automated Systems Technician (RAST) project developed a robotics technician model curriculum for the use of state directors of vocational education and two-year college vocational/technical educators. A baseline management plan was developed to guide the project. To provide awareness, project staff developed a dissemination plan…

NHEXAS PHASE I ARIZONA STUDY--STANDARD OPERATING PROCEDURE FOR CODING: TECHNICIAN WALK-THROUGH QUESTIONNAIRE (UA-D-35.0)

EPA Science Inventory

The purpose of this SOP is to define the coding strategy for the Technician Walk-Through Questionnaire. This questionnaire was developed for use during the Arizona NHEXAS project and the "Border" study. Keywords: data; coding; technician walk-through questionnaire.

The Nationa...

NHEXAS PHASE I ARIZONA STUDY--STANDARD OPERATING PROCEDURE FOR CLEANING: TECHNICIAN WALK-THROUGH QUESTIONNAIRE (UA-D-36.0)

EPA Science Inventory

The purpose of this SOP is to define the steps involved in cleaning the electronic data generated from data entry of the Technician Walk-Through Questionnaire. It applies to electronic data corresponding to the Technician Walk-Through Questionnaire that was scanned and verified ...

Analog and Digital Electronics. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Cavanaugh, Vince; Greer, Marlin

This study guide is part of an interdisciplinary curriculum entitled the Science and Engineering Technician (SET) Curriculum devised to provide basic information to train technicians in the use of electronic instruments and their application. The program of study integrates elements from the disciplines of chemistry, physics, mathematics,…

A Wider Role for Technicians in Science Practical Work with School Students?

ERIC Educational Resources Information Center

Helliar, Anne T.; Harrison, Timothy G.

2010-01-01

This paper reports the results of a study made on the impact of improved deployment of science technicians in the classroom could directly benefit students in practical science investigations. Science technicians are skilled individuals whose understanding of practical work is a valuable resource not being used of in support of students…

75 FR 1021 - Magnuson-Stevens Fishery Conservation and Management Act Provisions; Fisheries of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-08

... LOA is needed; the name(s) and affiliation of the fishery research technicians that will be collecting the data; a statement demonstrating the qualifications of the research technician that will be... the RA's designee, to temporarily exempt a vessel, on which a qualified fishery research technician is...

National Apprenticeship and Training Standards for Optical Technician (Contact Lens Technician).

ERIC Educational Resources Information Center

Manpower Administration (DOL), Washington, DC. Bureau of Apprenticeship and Training.

A statement of policy of the Contact Lens Society of America regarding contact lens filters is followed by national apprenticeship and training standards for optical technicians approved and adopted by the Contact Lens Society of America in accordance with the basic standards recommended by the Bureau of Apprenticeship and Training of the…

Analysis of Associate Degree Program for Traffic Safety Technicians. Final Report.

ERIC Educational Resources Information Center

Shimada, Jonathan K.

A study was conducted to evaluate the impact of the Associate Degree Program for Traffic Engineering Technicians (TET's) offered at three community colleges on students' subsequent job performance as technicians. Data were collected by means of personal interviews and telephone interviews with 81 students, their primary instructors, and their…

Pharmacy technician-to-pharmacist ratios: a state-driven safety and quality decision.

PubMed

Bess, D Todd; Carter, Jason; DeLoach, Lindsey; White, Carol L

2014-01-01

To discuss the policy of pharmacy technician-to-pharmacist ratios by comparing Florida as an example of legislative-led authority versus Tennessee as an example of board of pharmacy-led ruling. Over the past 2 years, the Florida legislature has debated the issue of pharmacy staffing ratios, initially leaving the Florida Board of Pharmacy with little authority to advocate for and enact safe technician staffing ratios. Anticipating this situation, the Tennessee Board of Pharmacy created rules to meet pharmacy staffing needs while protecting the authority of the pharmacist-in-charge and promoting patient safety. Before enacting rules, members of the board toured the state and talked about proposed rule changes with pharmacists. The final rule sets the pharmacy technician-to-pharmacist ratio at 2:1 but permits a 4:1 ratio based on public safety considerations and availability of at least two Certified Pharmacy Technicians. Pharmacists and leaders within the profession should conduct further research on appropriate and safe ratios of pharmacy technicians to pharmacists, with a focus on safety and quality of care.

21 CFR 1010.4 - Variances.

Code of Federal Regulations, 2010 CFR

2010-04-01

... (formerly the Radiation Control for Health and Safety Act of 1968), and: (i) The scope of the requested... FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) RADIOLOGICAL HEALTH... and Radiological Health, Food and Drug Administration, may grant a variance from one or more...

Is Your Interventional Radiology Service Ready for SARS?: The Singapore Experience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lau, Te-Neng; Teo, Ngee; Tay, Kiang-Hiong

2003-09-15

The recent epidemic of severe acute respiratory syndrome caught many by surprise. Hitherto, infection control has not been in the forefront of radiological practice. Many interventional radiology (IR) services are therefore not equipped to deal with such a disease. In this review, we share our experience from the interventional radiologist's perspective, report on the acute measures instituted within our departments and explore the long-term effects of such a disease on the practice of IR.

Occupational Radiation Exposure to the Extremities of Medical Staff during Hysterosalpingography and Radionuclide Bone Scan Procedures in Several Nigerian Hospitals.

PubMed

Jibiri, Nnamdi Norbert; Akintunde, Tawakalitu Oluwatoyin; Dambele, Musa Yusuf; Olowookere, Christopher Jimoh

2016-10-05

The practice of regular dose measurement helps to ascertain the level of occupational dose delivered to the staff involved in diagnostic procedures. This study was carried out to evaluate the dose exposed to the hands of radiologists and a radiologic technologist carrying out HSG and radionuclide bone scan examinations in several hospitals in Nigeria. Radiation doses exposed to the hands of radiologists and a technician carrying out hysterosalpingography (HSG) and bone scan procedures were measured using calibrated thermo-luminescent dosimeters. Five radiologists and a radiologic technologist were included in the study for dose measurement. The study indicates that each radiologist carried out approximately 2 examinations per week with the mean dose ranging between 0.49-0.62 mSv per week, resulting in an annual dose of 191 mSv. Similarly, the occupational dose delivered to both the left and right hands of a radiologic technologist administering 99mTc-methylene diphosphonate (MDP) without cannula and with cannula were 10.68 (720.2) and 13.82 (556.4) mSv per week (and per annum), respectively. It was determined that the left hand of the personnel received higher doses than their right hand. The estimated annual dose during HSG is far below the annual dose limit for deterministic effects, however, it is greater than 10% of the applicable annual dose limit. Hence, routine monitoring is required to ensure adequate protection of the personnel. The total annual dose received during the bone scan exceeds the annual dose limit for both hands, and the dose to either left or right hand is greater than the dose limit of 500 mSv/yr. The radiologists monitored are not expected to incur any deterministic effects during HSG examinations, however, accumulated doses arising from the scattered radiation to the eyes, legs, and neck could be substantial and might lead to certain effects. More staff are required to administer 99mTc-MDP in Nigerian institutions to prevent excessive doses to personnel.

Occupational Radiation Exposure to the Extremities of Medical Staff during Hysterosalpingography and Radionuclide Bone Scan Procedures in Several Nigerian Hospitals

PubMed Central

Jibiri, Nnamdi Norbert; Akintunde, Tawakalitu Oluwatoyin; Dambele, Musa Yusuf; Olowookere, Christopher Jimoh

2016-01-01

Objective: The practice of regular dose measurement helps to ascertain the level of occupational dose delivered to the staff involved in diagnostic procedures. This study was carried out to evaluate the dose exposed to the hands of radiologists and a radiologic technologist carrying out HSG and radionuclide bone scan examinations in several hospitals in Nigeria. Methods: Radiation doses exposed to the hands of radiologists and a technician carrying out hysterosalpingography (HSG) and bone scan procedures were measured using calibrated thermo-luminescent dosimeters. Five radiologists and a radiologic technologist were included in the study for dose measurement. Results: The study indicates that each radiologist carried out approximately 2 examinations per week with the mean dose ranging between 0.49-0.62 mSv per week, resulting in an annual dose of 191 mSv. Similarly, the occupational dose delivered to both the left and right hands of a radiologic technologist administering 99mTc-methylene diphosphonate (MDP) without cannula and with cannula were 10.68 (720.2) and 13.82 (556.4) mSv per week (and per annum), respectively. It was determined that the left hand of the personnel received higher doses than their right hand. Conclusion: The estimated annual dose during HSG is far below the annual dose limit for deterministic effects, however, it is greater than 10% of the applicable annual dose limit. Hence, routine monitoring is required to ensure adequate protection of the personnel. The total annual dose received during the bone scan exceeds the annual dose limit for both hands, and the dose to either left or right hand is greater than the dose limit of 500 mSv/yr. The radiologists monitored are not expected to incur any deterministic effects during HSG examinations, however, accumulated doses arising from the scattered radiation to the eyes, legs, and neck could be substantial and might lead to certain effects. More staff are required to administer 99mTc-MDP in Nigerian institutions to prevent excessive doses to personnel. PMID:27751973

An indoor radon survey of the X-ray rooms of Mexico City hospitals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Juarez, Faustino; Reyes, Pedro G.; Espinosa, Guillermo

This paper presents the results of measurements of indoor radon concentrations in the X-ray rooms of a selection of hospitals in the metropolitan area of Mexico City. The metropolitan area of Mexico City is Mexico's largest metropolitan area by population; the number of patients requiring the use of X-rays is also the highest. An understanding of indoor radon concentrations in X-ray rooms is necessary for the estimation of the radiological risk to which patients, radiologists and medical technicians are exposed. The indoor radon concentrations were monitored for a period of six months using nuclear track detectors (NTD) consisting of amore » closed-end cup system with CR-39 (Lantrack Registered-Sign ) polycarbonate as detector material. The indoor radon concentrations were found to be between 75 and 170 Bq m{sup -3}, below the USEPA-recommended indoor radon action level for working places of 400 Bq m{sup -3}. It is hoped that the results of this study will contribute to the establishment of recommended action levels by the Mexican regulatory authorities responsible for nuclear safety.« less

The Stability of Factors Influencing the Choice of Medical Specialty Among Medical Students and Postgraduate Radiology Trainees.

PubMed

Yen, Adam J; Webb, Emily M; Jordan, Eric J; Kallianos, Kimberly; Naeger, David M

2018-06-01

To investigate whether general psychological motivating factors that guide career selection of a medical specialty differ over the course of medical school and to compare differences in motivating factors among students choosing "controllable" lifestyle specialties, students choosing "uncontrollable" lifestyle specialties, and a cohort of radiology residents. An anonymous survey was distributed to first- through fourth-year medical students and radiology residents at a single institution. Participants were asked to select their top three of seven factors that most influenced their choice of medical specialty. Fourth-year students were asked to designate the specialty to which they had applied. The survey was distributed to 259 students and 47 radiology residents with a response rate of 93.8% (243 of 259) and 95.7% (45 of 47), respectively. The top three factors indicated by medical students were finding the daily work fulfilling, work-life balance, and interest in the subject. These top three factors were common to all medical student classes and did not differ between students choosing "controllable" versus "uncontrollable" fields. The factors uncommonly selected were similar personality to others in the field, attending income, competitiveness or prestige, and job market conditions. For radiology residents, the top three motivating factors were the same as for medical students. Three out of seven motivating factors were universally important to trainees, regardless of their stage of medical training or their selection of a controllable versus uncontrollable lifestyle specialty. These data suggest the variety of career choices made by students may not derive from differing underlying values. Copyright © 2018 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Technicians for Intelligent Buildings. Final Report.

ERIC Educational Resources Information Center

Prescott, Carolyn; Thomson, Ron

"Intelligent building" is a term that has been coined in recent years to describe buildings in which computer technology is intensely applied in two areas of building operations: control systems and shared tenant services. This two-part study provides an overview of the intelligent building industry and reports on issues related to the…

A DIY Ultrasonic Signal Generator for Sound Experiments

ERIC Educational Resources Information Center

Riad, Ihab F.

2018-01-01

Many physics departments around the world have electronic and mechanical workshops attached to them that can help build experimental setups and instruments for research and the training of undergraduate students. The workshops are usually run by experienced technicians and equipped with expensive lathing, computer numerical control (CNC) machines,…

Music as Narrative in American College Football

ERIC Educational Resources Information Center

McCluskey, John Michael

2016-01-01

American college football features an enormous amount of music woven into the fabric of the event, with selections accompanying approximately two-thirds of a game's plays. Musical selections are controlled by a number of forces, including audio and video technicians, university marketing departments, financial sponsors, and wind bands. These blend…

Robotic Arms. A Contribution to the Curriculum. An Occasional Paper.

ERIC Educational Resources Information Center

Arnold, W. F.; Carpenter, C. J.

This report examines ways of providing technician training in the operating principles of robotic devices. The terms "robotics" and "robotic arms" are first defined. Some background information on the principal features of robotic arms is given, including their geometric arrangement, type of actuator used, control method, and…

40 CFR 745.90 - Renovator certification and dust sampling technician certification.

Code of Federal Regulations, 2011 CFR

2011-07-01

... AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN... renovator. (3) Individuals who have successfully completed an accredited lead-based paint inspector or risk... whether components to be affected by the renovation contain lead-based paint. (7) Must have with them at...

CNC Turning Technician. A Competency-Based Instructional System.

ERIC Educational Resources Information Center

Sloan, Kelly; Hilley, Robert

This competency-based curriculum guide for instructing students in using computer numerically controlled (CNC) turning machines is one of a series of instructional guides for the machinist field developed in Oklahoma. Although developed jointly with Baxter Technologies Corporation and oriented toward the Baxter Vo-Tec 2000 Future Builder CNC…

47 CFR 97.119 - Station identification.

Code of Federal Regulations, 2013 CFR

2013-10-01

... on the common data base coordinated, maintained and disseminated by the special event call sign data... part of the communications are transmitted by a RTTY or data emission; (4) By an image emission... from Novice or Technician to General Class: AG; (3) For a control operator who has requested a license...

47 CFR 97.119 - Station identification.

Code of Federal Regulations, 2011 CFR

2011-10-01

... on the common data base coordinated, maintained and disseminated by the special event call sign data... part of the communications are transmitted by a RTTY or data emission; (4) By an image emission... from Novice or Technician to General Class: AG; (3) For a control operator who has requested a license...

47 CFR 97.119 - Station identification.

Code of Federal Regulations, 2014 CFR

2014-10-01

... on the common data base coordinated, maintained and disseminated by the special event call sign data... part of the communications are transmitted by a RTTY or data emission; (4) By an image emission... from Novice or Technician to General Class: AG; (3) For a control operator who has requested a license...

47 CFR 97.119 - Station identification.

Code of Federal Regulations, 2012 CFR

2012-10-01

... on the common data base coordinated, maintained and disseminated by the special event call sign data... part of the communications are transmitted by a RTTY or data emission; (4) By an image emission... from Novice or Technician to General Class: AG; (3) For a control operator who has requested a license...

Defining the Role of the Pharmacy Technician and Identifying Their Future Role in Medicines Optimisation

PubMed Central

Boughen, Melanie; Sutton, Jane; Fenn, Tess

2017-01-01

Background: Traditionally, pharmacy technicians have worked alongside pharmacists in community and hospital pharmacy. Changes within pharmacy provide opportunity for role expansion and with no apparent career pathway, there is a need to define the current pharmacy technician role and role in medicines optimisation. Aim: To capture the current roles of pharmacy technicians and identify how their future role will contribute to medicines optimisation. Methods: Following ethical approval and piloting, an online survey to ascertain pharmacy technicians’ views about their roles was undertaken. Recruitment took place in collaboration with the Association of Pharmacy Technicians UK. Data were exported to SPSS, data screened and descriptive statistics produced. Free text responses were analysed and tasks collated into categories reflecting the type of work involved in each task. Results: Responses received were 393 (28%, n = 1380). Results were organised into five groups: i.e., hospital, community, primary care, General Practitioner (GP) practice and other (which included HM Prison Service). Thirty tasks were reported as commonly undertaken in three or more settings and 206 (84.7%, n = 243) pharmacy technicians reported they would like to expand their role. Conclusions: Tasks core to hospital and community pharmacy should be considered for inclusion to initial education standards to reflect current practice. Post qualification, pharmacy technicians indicate a significant desire to expand clinically and managerially allowing pharmacists more time in patient-facing/clinical roles. PMID:28970452

POOL WATER TREATMENT AND COOLING SYSTEM DESCRIPTION DOCUMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

V. King

2000-06-19

The Pool Water Treatment and Cooling System is located in the Waste Handling Building (WHB), and is comprised of various process subsystems designed to support waste handling operations. This system maintains the pool water temperature within an acceptable range, maintains water quality standards that support remote underwater operations and prevent corrosion, detects leakage from the pool liner, provides the capability to remove debris from the pool, controls the pool water level, and helps limit radiological exposure to personnel. The pool structure and liner, pool lighting, and the fuel staging racks in the pool are not within the scope of themore » Pool Water Treatment and Cooling System. Pool water temperature control is accomplished by circulating the pool water through heat exchangers. Adequate circulation and mixing of the pool water is provided to prevent localized thermal hotspots in the pool. Treatment of the pool water is accomplished by a water treatment system that circulates the pool water through filters, and ion exchange units. These water treatment units remove radioactive and non-radioactive particulate and dissolved solids from the water, thereby providing the water clarity needed to conduct waste handling operations. The system also controls pool water chemistry to prevent advanced corrosion of the pool liner, pool components, and fuel assemblies. Removal of radioactivity from the pool water contributes to the project ALARA (as low as is reasonably achievable) goals. A leak detection system is provided to detect and alarm leaks through the pool liner. The pool level control system monitors the water level to ensure that the minimum water level required for adequate radiological shielding is maintained. Through interface with a demineralized water system, adequate makeup is provided to compensate for loss of water inventory through evaporation and waste handling operations. Interface with the Site Radiological Monitoring System provides continuous radiological monitoring of the pool water. The Pool Water Treatment and Cooling System interfaces with the Waste Handling Building System, Site-Generated Radiological Waste Handling System, Site Radiological Monitoring System, Waste Handling Building Electrical System, Site Water System, and the Monitored Geologic Repository Operations Monitoring and Control System.« less

Bulgarian experience in the establishment of reference dose levels and implementation of a quality control system in diagnostic radiology.

PubMed

Vassileva, J; Dimov, A; Slavchev, A; Karadjov, A

2005-01-01

Results from a Bulgarian patient dose survey in diagnostic radiology are presented. Reference levels for entrance surface dose (ESD) were 0.9 mGy for chest radiography (PA), 30 mGy for lumbar spine (Lat), 10 mGy for pelvis, 5 mGy for skull (AP), 3 mGy for skull (Lat) and 13 mGy for mammography. Quality control (QC) programmes were proposed for various areas of diagnostic radiology. Film processing QC warranted special attention. Proposed QC programmes included parameters to be tested, level of expertise needed and two action levels: remedial and suspension. Programmes were tested under clinical conditions to assess initial results and draw conclusions for further QC system development. On the basis of international experience, measurement protocols were developed for all parameters tested. QC equipment was provided as part of the PHARE project. A future problem for QC programme implementation may be the small number of medical physics experts in diagnostic radiology.

CHALLENGES IN SETTING UP QUALITY CONTROL IN DIAGNOSTIC RADIOLOGY FACILITIES IN NIGERIA.

PubMed

Inyang, S O; Egbe, N O; Ekpo, E

2015-01-01

The Nigerian Nuclear Regulatory Authority (NNRA) was established to regulate and control the use of radioactive and radiation emitting sources in Nigeria. Quality control (QC) on diagnostic radiology equipment form part of the fundamental requirements for the authorization of diagnostic radiology facilities in the Country. Some quality control tests (output, exposure linearity and reproducibility) were measured on the x-ray machines in the facilities that took part in the study. Questionnaire was developed to evaluate the frequencies at which QC tests were conducted in the facilities and the challenges in setting up QC. Results show great variation in the values of the QC parameters measured. Inadequate cooperation by facilities management, lack of QC equipment and insufficient staff form the major challenges in setting up QC in the facilities under study. The responses on the frequencies at which QC tests should be conducted did not correspond to the recommended standards; indicating that personnel were not familiar with QC implementation and may require further training on QC.

Raising the Bar or Training Library Technicians To Assume Reference Responsibilities.

ERIC Educational Resources Information Center

Brandys, Barbara; Daghita, Joan; Whitmore, Susan

This paper reports on a program at the National Institutes of Health (NIH) Library that was instituted to train library technicians to work at the Information Desk as Reference Assistants; the objectives of the program were to train library technicians to become reference assistants, to free up librarians' time for new work assignments, and to…

Engine-Building Contest Inspires Future Automotive Technicians

ERIC Educational Resources Information Center

Kraft, Thomas; Morphew, Rick; Norris, Gerald

2004-01-01

According to the Bureau of Labor Statistics, the requirement for automotive technicians will increase 17 percent by 2008 from the 10-year period starting in 1998. In numbers, this translates to the need for an additional 132,000 technicians over the 790,000 that existed in 1998. The nation is currently losing 10 percent of its automotive…

Technicians prepare to close hatches on Gemini 11 spacecraft during countdown

NASA Technical Reports Server (NTRS)

1966-01-01

Technicians in the White Room atop Pad 19 prepare to close hatches on the Gemini 11 spacecraft during prelaunch countdown. Inside the spacecraft are Astronauts Charles Conrad Jr., command pilot, and Richard F. Gordon Jr., pilot. There is a humorous sign stating 'This is ABSOLUTELY your Last Chance' being held by one of the technicians.

Science and Engineering Graphics I. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Craig, Jerry; Stapleton, Jerry

This study guide is part of a program of studies entitled Science and Engineering Technician (SET) Curriculum. The SET Curriculum was developed for the purpose of training technicians in the use of electronic instruments and their applications. It integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology,…

Physics of Mechanical, Gaseous, and Fluid Systems. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Dixon, Peggy; And Others

This study guide is part of a program of studies entitled Science and Engineering Technician (SET) Curriculum. The SET Curriculum integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology, and electronic technology. The objective of this curriculum development project is to train technicians in the use of…

Chemical Science and Technology II. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Ballinger, Jack T.; Wolf, Lawrence J.

This study guide is part of a program of studies entitled the Science and Engineering Technician (SET) Curriculum developed to provide a framework for training technicians in the use of electronic instruments and their applications. This interdisciplinary course of study integrates elements from the disciplines of chemistry, physics, mathematics,…

Electronic Components, Transducers, and Basic Circuits. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Mowery, Donald R.

This study guide is part of a program of studies entitled the Science and Engineering Technician (SET) Curriculum developed for the purpose of training technicians in the use of electronic instruments and their applications. The program integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology, and…

Microcprocessing Computer Technician, Digital and Microprocessor Technician Program. Post-Graduate 5th Year.

ERIC Educational Resources Information Center

Carangelo, Pasquale R.; Janeczek, Anthony J.

Materials are provided for a two-semester digital and microprocessor technician postgraduate program. Prerequisites stated for the program include a background in DC and AC theory, solid state devices, basic circuit fundamentals, and basic math. A chronology of major topics and a listing of course objectives appear first. Theory outlines for each…

In Perspective. Colombo Plan Staff College for Technician Education: First Two Years.

ERIC Educational Resources Information Center

Colombo Plan Staff Coll., Singapore.

This brochure explains the basic structures, content, and methodologies, which have been established by the Colombo Plan Staff College for Technician Training for its activities in its first two years of operation. The role of a variety of technicians is explained, along with their importance in developing countries. The problems of technician…

U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--STANDARD OPERATING PROCEDURE FOR CODING: TECHNICIAN WALK-THROUGH QUESTIONNAIRE (UA-D-35.0)

EPA Science Inventory

The purpose of this SOP is to define the coding strategy for the Technician Walk-Through Questionnaire. This questionnaire was developed for use during the Arizona NHEXAS project and the Border study. Keywords: data; coding; technician walk-through questionnaire.

The U.S.-Mexi...

U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--STANDARD OPERATING PROCEDURE FOR CLEANING: TECHNICIAN WALK-THROUGH QUESTIONNAIRE (UA-D-36.0)

EPA Science Inventory

The purpose of this SOP is to define the steps involved in cleaning the electronic data generated from data entry of the Technician Walk-Through Questionnaire. It applies to electronic data corresponding to the Technician Walk-Through Questionnaire that was scanned and verified ...

5 CFR 844.103 - Eligibility.

Code of Federal Regulations, 2010 CFR

2010-01-01

.... (c)(1) Paragraphs (a)(2) through (a)(4) of this section do not apply to a military reserve technician... technician under circumstances set forth in 5 U.S.C. 8456(a)(1) after reaching age 50 and completing 25 years... under § 842.210 of this chapter. (3) A former military reserve technician is not entitled to an annuity...

32 CFR 536.97 - Scope for claims under the National Guard Claims Act.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) The ARNG also employs civilians, referred to as technicians and employed under 32 U.S.C. 709. Technicians are usually, but not always, ARNG soldiers who perform the usual 15 days of annual training (a... technicians. However, since the NGCA's enactment in 1960, Congress has also extended Federal Tort Claims Act...

EC95-42939-3

NASA Image and Video Library

1995-02-02

The support crew for the F-16A, the F-16XL no. 1, and the F-16 AFTI are, top row, left to right: Randy Weaver; mechanic, Susan Ligon; mechanic, Bob Garcia; Crew Chief, Rich Kelly; mechanic, Dale Edminister; Avionics Technician. Bottom row, left to right, Art Cope; mechanic, John Huffman; Avionics Technician, Jaime Garcia; Avionics Technician, Don Griffith, Avionics Tech. Co-op student. The F-16A (NASA 516), the only civil registered F-16 in existence, was transferred to Dryden from Langley, and was primarily used in engine tests and for parts. It was subsequently transfered from Dryden. The single-seat F-16XL no. 1 (NASA 849) was most recently used in the Cranked-Arrow Wing Aerodynamics Project (CAWAP) to test boundary layer pressures and distribution. Previously it had been used in a program to investigate the characteristics of sonic booms for NASA's High Speed Research Program. Data from the program will be used in the development of a high speed civilian transport. During the series of sonic boom research flights, the F-16XL was used to probe the shock waves being generated by a NASA SR-71 and record their shape and intensity. The Advanced Fighter Technology Integration (AFTI) F-16 was used to develop and demonstrate technologies to improve navigation and a pilot's ability to find and destroy enemy ground targets day or night, including adverse weather. Earlier research in the joint NASA-Air Force AFTI F-16 program demonstrated voice actuated controls, helmet-mounted sighting and integration of forward-mounted canards with the standard flight control system to achieve uncoupled flight.

EC95-42939-5

NASA Image and Video Library

1995-02-02

The support crew for the F-16A, the F-16XL no. 1, and the F-16 AFTI are, top row, left to right: Randy Weaver; mechanic, Susan Ligon; mechanic, Bob Garcia; Crew Chief, Rich Kelly; mechanic, Dale Edminister; Avionics Technician. Bottom row, left to right, Art Cope; mechanic, John Huffman; Avionics Technician, Jaime Garcia; Avionics Technician, Don Griffith, Avionics Tech. Co-op student. The F-16A (NASA 516), the only civil registered F-16 in existence, was transferred to Dryden from Langley, and was primarily used in engine tests and for parts. It was subsequently transfered from Dryden. The single-seat F-16XL no. 1 (NASA 849) was most recently used in the Cranked-Arrow Wing Aerodynamics Project (CAWAP) to test boundary layer pressures and distribution. Previously it had been used in a program to investigate the characteristics of sonic booms for NASA's High Speed Research Program. Data from the program will be used in the development of a high speed civilian transport. During the series of sonic boom research flights, the F-16XL was used to probe the shock waves being generated by a NASA SR-71 and record their shape and intensity. The Advanced Fighter Technology Integration (AFTI) F-16 was used to develop and demonstrate technologies to improve navigation and a pilot's ability to find and destroy enemy ground targets day or night, including adverse weather. Earlier research in the joint NASA-Air Force AFTI F-16 program demonstrated voice actuated controls, helmet-mounted sighting and integration of forward-mounted canards with the standard flight control system to achieve uncoupled flight.

KSC-2009-2977

NASA Image and Video Library

2009-05-06

CAPE CANAVERAL, Fla. – A technician works at installing a new window in the Launch Control Center's Firing Room 1 at NASA's Kennedy Space Center in Florida. The firing room will support the future Ares rocket launches as part of NASA's Constellation Program. Future astronauts will ride to orbit on Ares I, launched from Kennedy's Launch Pad 39B. The Launch Control Center firing rooms face the launch pads. Photo credit: NASA/Jack Pfaller

Ultrasonic prediction of carcass merit in beef cattle: evaluation of technician effects on ultrasonic estimates of carcass fat thickness and longissimus muscle area.

PubMed

Perkins, T L; Green, R D; Hamlin, K E; Shepard, H H; Miller, M F

1992-09-01

The objective of this study was to determine technician effects of live animal ultrasonic estimates of fat thickness (FTU) and longissimus muscle area (LMAU). Steers (n = 36) representing four breed-types (Brown Swiss, Average Zebu-cross Mexican, Corriente Mexican, and typical British crossbred) of commercial slaughter cattle were isonified to estimate accuracy and repeatability of fat thickness (FT) and longissimus muscle area (LMA) measurements by two experienced technicians. Repeated measures of FTU and LMAU were taken by technicians on two consecutive days with an Aloka 500V ultrasound unit equipped with a 3.5-MHz, 172-mm scanning width, linear-array transducer. Ultrasonic estimates of fat thickness and LMAU were taken at the 12th and 13th rib interface 48 h before slaughter; carcass fat thickness (FTC) and longissimus muscle area (LMAC) were measured 48 h postmortem. Means for FTU, FTC, LMAU, and LMAC were .91 +/- .36 cm, .82 +/- .40 cm, 70.7 +/- 9.43 cm2, and 72.4 +/- 8.9 cm2, respectively. Ultrasound and carcass measures of FT and LMA were different (P less than .01) among breed-types but were not different (P greater than .10) between technicians or for technician x breed-type interactions. Pooled simple correlation coefficients (P less than .01) were .87 and .86 between FTU and FTC and .76 and .82 between LMAU and LMAC for Technicians 1 and 2, respectively. Repeatabilities estimated by intraclass correlation methods were .91 +/- .03 and .81 +/- .06 for images repeated over 2 d and .95 +/- .02 and .83 +/- .05 for images repeated by two technicians for FT and LMA, respectively.(ABSTRACT TRUNCATED AT 250 WORDS)

Survey to assess the role of pharmacy technicians and nonpharmacist staff in the operation of research pharmacies.

PubMed

Siden, Rivka; Tamer, Helen R; Skyles, Amy J; Dolan, Christopher S; Propes, Denise J; Redic, Kimberly

2014-11-01

Results of a survey assessing trends and innovations in the use of pharmacy technicians and other nonpharmacist staff in the research pharmacy setting are reported. A Web-based survey was distributed to Internet communities of members of the American Society of Health-System Pharmacists and the University Health-System Consortium involved in investigational drug research and related practice areas. The survey collected data on the characteristics of institutions with pharmacy department staff dedicated to such research activities and the participation of pharmacists, technicians, and other staff in key areas of research pharmacy operations. Survey responses from 51 institutions were included in the data analysis. Overall, the reported distribution of assigned responsibility for most evaluated research pharmacy tasks reflected traditional divisions of pharmacist and technician duties, with technicians performing tasks subject to a pharmacist check or pharmacists completing tasks alone. However, some institutions reported allowing technicians to perform a number of key tasks without direct pharmacist supervision, primarily in the areas of inventory management and sponsor monitoring and auditing; almost half of the surveyed institutions reported technician involvement in teaching activities. In general, the reported use of "tech-check-tech" arrangements in research pharmacies was very limited. Some responding institutions reported the innovative use of nonpharmacist staff (e.g., paid interns, students and residents on rotation). Although the majority of research pharmacy tasks related to direct patient care are performed by or under the direct supervision of pharmacists, a variety of other essential tasks are typically assigned to pharmacy technicians and other nonpharmacist staff. Copyright © 2014 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Clinical support role for a pharmacy technician within a primary care resource center.

PubMed

Fera, Toni; Kanel, Keith T; Bolinger, Meghan L; Fink, Amber E; Iheasirim, Serah

2018-02-01

The creation of a clinical support role for a pharmacy technician within a primary care resource center is described. In the Primary Care Resource Center (PCRC) Project, hospital-based care transition coordination hubs staffed by nurses and pharmacist teams were created in 6 independent community hospitals. At the largest site, patient volume for targeted diseases challenged the ability of the PCRC pharmacist to provide expected elements of care to targeted patients. Creation of a new pharmacy technician clinical support role was implemented as a cost-effective option to increase the pharmacist's efficiency. The pharmacist's work processes were reviewed and technical functions identified that could be assigned to a specially trained pharmacy technician under the direction of the PCRC pharmacist. Daily tasks performed by the pharmacy technician included maintenance of the patient roster and pending discharges, retrieval and documentation of pertinent laboratory and diagnostic test information from the patient's medical record, assembly of patient medication education materials, and identification of discrepancies between disparate systems' medication records. In the 6 months after establishing the PCRC pharmacy technician role, the pharmacist's completion of comprehensive medication reviews (CMRs) for target patients increased by 40.5% ( p = 0.0223), driven largely by a 42.4% ( p < 0.0001) decrease in the time to complete each chart review. The addition of a pharmacy technician to augment pharmacist care in a PCRC team extended the reach of the pharmacist and allowed more time for the pharmacist to engage patients. Technician support enabled the pharmacist to complete more CMRs and reduced the time required for chart reviews. Copyright © 2018 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

An in-depth examination into pharmacy technician worklife through an organizational behavior framework.

PubMed

Desselle, Shane P

2016-01-01

Pharmacy technicians are a vital part of the health care workforce. Little is known about perceptions of their own work environment that would engender more effective recruitment, retention, and management strategies by pharmacists and employers. The purpose of this study was to gain a greater understanding of certified pharmacy technician worklife. Specific objectives included the identification of themes of worklife phenomena to assist with the development of appropriate responses by other pharmacy stakeholders and to ascertain the contribution of various factors engendering or discouraging career commitment of pharmacy technicians. Semi-structured in-depth interviews were carried out with a convenience sample of pharmacy technicians in one U.S. state, who varied by their work settings and level of experience. The interview guide and corresponding participant responses were framed from around an organizational cultural basis rooted in organizational behavior theory. Notes from the interviews were analyzed thematically using directed content analysis. Four primary themes emerged, including: career impetus, job responsibilities, quality of work life, and equitable partnership. The data revealed pharmacy technicians' need for self-actualization and recognition of the value they bring to the organization. The participants identified primary responsibilities that contribute to their sense of worth and those that if not managed adequately potentially detract from their well-being and effectiveness. Findings in regard to rate of pay corroborate previous work on wages as both an intrinsic and extrinsic motivator. Pharmacy technicians seek equity among each other (their peers) and in a mutually beneficial relationship with their employing organization. This study provides the impetus for interventions and further study that should serve to enhance pharmacy technician effectiveness, quality of work life, and longevity in an emerging profession. Copyright © 2015 Elsevier Inc. All rights reserved.

[Competencies in the education of nursing technicians to implement the nursing care systematization].

PubMed

da Cruz, Andrea de Mello Pereira; Almeida, Miriam de Abreu

2010-12-01

This is a qualitative, exploratory and descriptive study whose general objective was to learn, considering the perspective of the nursing technician who works in school hospitals, the competencies developed during their educational process to implement the Nursing Care Systematization (NCS). Data collection and analysis were carried out through a focal group, with content analysis and nursing technicians. Two thematic categories emerged: The participation of the nursing technician in the NCS and The competencies in the education of the nursing technician. Each one received two subcategories: Conception of the NCS and (De)valuation of the NCS, Technical-scientific competency and Competency in the interpersonal relationship, respectively. It was observed that the NCS must be shared, discussed and made public among nursing professionals, so that they may acknowledge themselves as the leading actors of their methodology and be aware that their practices determine the results.

KSC-08pd1902

NASA Image and Video Library

2008-07-02

CAPE CANAVERAL, Fla. – A United Space Alliance technician (right) hands off a component of the Orion Crew Module mockup to one of the other technicians inside the mockup. The technicians wear motion capture suits. The motion tracking aims to improve efficiency of assembly processes and identify potential ergonomic risks for technicians assembling the mockup, which was created and built at the New York Institute of Technology by a team led by Prof. Peter Voci, MFA Director at the College of Arts and Sciences. The motion tracking aims to improve efficiency of assembly processes and identify potential ergonomic risks for technicians assembling the mockup. The work is being performed in United Space Alliance's Human Engineering Modeling and Performance Lab in the RLV Hangar at NASA's Kennedy Space Center. Part of NASA's Constellation Program, the Orion spacecraft will return humans to the moon and prepare for future voyages to Mars and other destinations in our solar system.

Influence of physical parameters on radiation protection and image quality in intra-oral radiology

NASA Astrophysics Data System (ADS)

Belinato, W.; Souza, D. N.

2011-10-01

In the world of diagnostic imaging, radiography is an important supplementary method for dental diagnosis. In radiology, special attention must be paid to the radiological protection of patients and health professionals, and also to image quality for correct diagnosis. In Brazil, the national rules governing the operation of medical and dental radiology were specified in 1998 by the National Sanitary Surveillance Agency, complemented in 2005 by the guide "Medical radiology: security and performance of equipment." In this study, quality control tests were performed in public clinics with dental X-ray equipment in the State of Sergipe, Brazil, with consideration of the physical parameters that influence radiological protection and also the quality of images taken in intra-oral radiography. The accuracy of the exposure time was considered acceptable for equipment with digital timers. Exposure times and focal-spot size variations can lead to increased entrance dose. Increased dose has also been associated with visual processing of radiographic film, which often requires repeating the radiographic examination.

A survey of interventional radiology for the management of obstetric haemorrhage in the United Kingdom.

PubMed

Webster, V J; Stewart, R; Stewart, P

2010-07-01

Massive haemorrhage remains a leading cause of maternal death worldwide. Interventional radiology can be used to prevent or treat life-threatening haemorrhage, but evidence for its efficacy is limited to case series predominantly from large tertiary centres. The current availability of interventional radiology for management of obstetric haemorrhage in the UK is unknown. A postal questionnaire on the use of interventional radiology was sent to the lead clinician for obstetric anaesthesia in 226 UK maternity units. The response rate was 72%; 74 respondents (46%) had considered and 51 (31%) used interventional radiology for control of obstetric haemorrhage. Its use was primarily confined to large tertiary obstetric units and limited by availability of equipment and staff. Interventional radiology to assist in the management of obstetric haemorrhage is not uniformly available in the UK and experience remains limited. Access to this resource is subject to striking local variability and influenced by the size and nature of the hospital supporting the delivery unit. 2010 Elsevier Ltd. All rights reserved.

Fault tree analysis for exposure to refrigerants used for automotive air conditioning in the United States.

PubMed

Jetter, J J; Forte, R; Rubenstein, R

2001-02-01

A fault tree analysis was used to estimate the number of refrigerant exposures of automotive service technicians and vehicle occupants in the United States. Exposures of service technicians can occur when service equipment or automotive air-conditioning systems leak during servicing. The number of refrigerant exposures of service technicians was estimated to be 135,000 per year. Exposures of vehicle occupants can occur when refrigerant enters passenger compartments due to sudden leaks in air-conditioning systems, leaks following servicing, or leaks caused by collisions. The total number of exposures of vehicle occupants was estimated to be 3,600 per year. The largest number of exposures of vehicle occupants was estimated for leaks caused by collisions, and the second largest number of exposures was estimated for leaks following servicing. Estimates used in the fault tree analysis were based on a survey of automotive air-conditioning service shops, the best available data from the literature, and the engineering judgement of the authors and expert reviewers from the Society of Automotive Engineers Interior Climate Control Standards Committee. Exposure concentrations and durations were estimated and compared with toxicity data for refrigerants currently used in automotive air conditioners. Uncertainty was high for the estimated numbers of exposures, exposure concentrations, and exposure durations. Uncertainty could be reduced in the future by conducting more extensive surveys, measurements of refrigerant concentrations, and exposure monitoring. Nevertheless, the analysis indicated that the risk of exposure of service technicians and vehicle occupants is significant, and it is recommended that no refrigerant that is substantially more toxic than currently available substitutes be accepted for use in vehicle air-conditioning systems, absent a means of mitigating exposure.

Mutations des roles techniques et formation. Etude documentaire (Changes in the Roles and Education of Technicians. Documentary Study).

ERIC Educational Resources Information Center

Pinard, Helene

Drawing from research conducted in 1990-91, this report examines trends affecting the future work of technicians in Quebec, their pre-employment education, and the link between college and work. Part 1 focuses on aspects of the economic, technological, and social environment that will influence the future role of technicians. Economic concerns…

An Investigation of the Effectiveness of Four-Year Industrial Technology Programs In Preparing Industrial Electronic Technicians to Meet the Requirements of Industry.

ERIC Educational Resources Information Center

Prewitt, Roger W.

To determine the effectiveness of the 4-year industrial technology programs in preparing industrial electronic technicians for employment in industry, data were obtained through an opinionnaire, which was sent to the higher education institutions offering a 4-year electronic technician program and to selected industrial representatives located in…

Fiberglass Technician Technical Terms. English-Thai Lexicon. Introduction to Fiberglass Technician. Thai Version. Multi-Cultural Competency-Based Vocational/Technical Curricula Series.

ERIC Educational Resources Information Center

Shin, Masako T.

This English-Thai lexicon and program introduction for fiberglass technician is one of eight documents in the Multicultural Competency-Based Vocational/Technical Curricula Series. It is intended for use in postsecondary, adult, and preservice teacher and administrator education. The first two sections provide Thai equivalencies of English…

Nuclear Technology Series. Radiation Protection Technician. A Suggested Program Planning Guide. Revised June 80.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This program planning guide for a two-year postsecondary radiation protection technician program is designed for use with courses 17-22 of thirty-five included in the Nuclear Technology Series. The purpose of the guide is to describe the nuclear power field and its job categories for specialists, technicians, and operators; and to assist planners,…

Technicians under the Microscope: The Training and Skills of University Laboratory and Engineering Workshop Technicians

ERIC Educational Resources Information Center

Lewis, Paul A.; Gospel, Howard

2015-01-01

The UK government aims to increase both the number, and also the status, of workers with intermediate-level skills, with a view to creating a "modern class of technicians" who can help to bolster economic growth and prosperity. This article considers the prospects for such a policy by focusing on one particular, but neglected, group of…

[Psychophysiological professional selection of drilling technicians who provide the sinking of oil wells].

PubMed

Amirov, Z R

2005-01-01

To protect health and to warn future workers against the choice of a petroleum job that was not in accord with their psychological and physiological features of their organism, studies (such as sanitary and psychophysiological ones) were conducted to create criteria for the professional selection of drilling technicians who provided the sinking of oil wells. The studies have been systematized and mathematically analyzed. This made it possible to reveal the significant psychophysiological properties (8 parameters) in a drilling technician. By taking into account these properties, the author derived a linear equation that estimates the fitness of a candidate for a job as a drilling technician.

Staphylococcus aureus with Panton-Valentine toxin skin infection in a medical laboratory technician.

PubMed

Pougnet, Richard; Pougnet, Laurence

2016-12-01

This report exposes the case of a Staphylococcus aureus infection occurring in a microbiology laboratory technician. He was a 52 year-old man without medical history. He presented an abscess on the anterior aspect of the left forearm. Analysis showed that it was a Staphylococcus aureus secreting the Panton-Valentine toxin. The study of the workplace found the frequency of exposure. The study of workstation showed the link between the technician position and the infection. Indeed, this man touched an area where the biocleaning was hard to do. This is the first case of infection with PVL described for a laboratory technician.

UK dental laboratory technicians' views on the efficacy and teaching of clinical-laboratory communication.

PubMed

Juszczyk, A S; Clark, R K F; Radford, D R

2009-05-23

The General Dental Council states that 'good dental care is delivered by a team' and restorative treatment is enhanced by communication between team members. Commercial dental laboratories are ideally placed to comment on effective communication. To investigate contemporary attitudes and communication between dentist and dental technician from the technician's perspective. Eight hundred and three dental laboratories were invited to take part in a postal survey covering dentist/laboratory communication and the dentist's understanding of technical procedures. Forty percent of laboratories responded. Only 9% scored communication as very good, 48% scored communication with newly qualified dentists better than with established dentists but only 26% considered that dental students were taught to communicate with dental laboratories effectively. The free comments that the respondents were invited to make identified three distinct themes, 'recognition within the dental team', 'effective communication between dentist and dental technician' and 'dentists lack of technical knowledge'. Effective communication between dentist and dental technician is often poor. It was the view of the dental technicians who responded that newly qualified dentists do not have an appropriate understanding of technical techniques. Dental schools are still not preparing new graduates to communicate effectively with dental laboratories.

Important skills for biomedical services: The perspectives of Malaysian employers and employees.

PubMed

Buntat, Yahya; Saud, Muhammad Sukri; Mokhtar, Mahani; Kamin, Yusri; Feh, Lim Set

2016-10-17

Increase in the occurrence of existing diseases, continual emergence of new or exotic diseases and re-emergence of old diseases have placed increasing demands on biomedical services in Malaysia. Biomedical technicians play an important role in operating biomedical instruments. However, there are no clear specifications about characteristics and traits for these semi-professional employees. Employers in a few studies claimed that biomedical graduates are not ready to enter and face challenges in the job market. Therefore, the purpose of this study is to identify technical and generic skills for a biomedical technician from the perspectives of the biomedical technicians and their employers. A quantitative survey design was employed whereby data were obtained through the administration of an instrument developed by the researchers. The sample consisted of 20 hospital managers and 186 biomedical technicians who are currently working in Malaysian government hospitals. The findings show that there are no difference in the perceptions of hospital managers and biomedical technicians regarding technical and non-technical skills. These findings resulted in a checklist which can be used for institutions to produce future biomedical technician graduates in order to meet job demands. However, future research is needed to validate the findings and explore the variables in depth.

[Analysis of subjective symptoms of upper extremities in dental technicians].

PubMed

Yoshida, H; Nagata, C; Mirbod, S M; Iwata, H; Inaba, R

1991-01-01

Our review of the literature showed no report on the subjective symptoms of the upper extremities in dental technicians. This study was therefore undertaken on 164 dental technicians in Gifu Prefecture to investigate the relationship between the subjective symptoms of the hands, arms and shoulders and work of dental technicians. The following results were obtained. 1) The prevalence of Raynaud's phenomenon and numbness of the fingers was 5.5 and 18.5 %, respectively. A significant positive correlation was observed between the prevalence and frequency of numbness and cold sensation in the fingers and the daily usage time (h) of high-speed type machines. In addition, pain in the fingers and around the wrists, and pain and numbness in the arms were significantly related to the daily usage time (h) of low-speed type machines. These results suggest that the usage of high- and low-speed type machines may be a cause of vibration syndrome among dental technicians. 2) A high prevalence of pain in the shoulders (30.8%), neck (30.1%), and back (36.3%) was observed in dental technicians. It is considered that these symptoms are related to the working posture and usage of machines.

Utilization of Pharmacy Technicians to Increase the Accuracy of Patient Medication Histories Obtained in the Emergency Department

PubMed Central

Pisupati, Radhika; Nerenberg, Steven F.

2016-01-01

Purpose: The purpose of this study is to determine the accuracy of a pharmacy technician–collected medication history pilot program in the emergency department. This was completed by reviewing all elements of the technician activity by direct observation and by verifying the technician-collected medication list through a second phone call by a pharmacist to the outpatient pharmacy. Methods: This was a retrospective, single-center study conducted from March to April 2015. Four certified pharmacy technicians were trained by a postgraduate year 1 (PGY1) pharmacy practice resident on how to collect, verify, and accurately enter medication histories into the electronic medical record. Accuracy of pharmacy technician–collected medication histories was verified by a pharmacist through observation of their patient interviews, review of technician-completed medication history forms, and by contacting the patient's outpatient pharmacy. Results: The pharmacy technician–completed medication histories resulted in an absolute risk reduction of errors of 50% and a relative risk reduction of errors of 77% (p < .001) in comparison to medication histories collected by non-pharmacy personnel. Conclusion: With high accuracy rates, pharmacy technicians proved to be a valuable asset to the medication history process and can enhance patient safety during care transitions. The results of this study further support the Pharmacy Practice Model Initiative vision to advance the pharmacy technician role to improve the process of medication history taking and reconciliation within the health care system. PMID:27303094

KSC-2012-1194

NASA Image and Video Library

2012-02-01

CAPE CANAVERAL, Fla. – At NASA’s Kennedy Space Center in Florida, technicians walk alongside as space shuttle Endeavour is being towed from the Vehicle Assembly Building to Orbiter Processing Facility-2. Shuttle Endeavour will remain in OPF-2 so that the orbiter maneuvering system (OMS) pods and forward reaction control system can be installed. Technicians also will offload water and Freon gas from lines located in Endeavour’s midbody. The work is part of Endeavour’s transition and retirement processing. The spacecraft is being prepared for public display at the California Science Center in Los Angeles. Endeavour flew 25 missions, spent 299 days in space, orbited Earth 4,671 times and traveled 122, 883, 151 miles over the course of its 19-year career. Endeavour’s STS-134 and final mission was completed after landing on June 1, 2011. Photo credit: Kim Shiflett

KSC-2012-1195

NASA Image and Video Library

2012-02-01

CAPE CANAVERAL, Fla. – At NASA’s Kennedy Space Center in Florida, technicians walk alongside as space shuttle Endeavour is being towed from the Vehicle Assembly Building to Orbiter Processing Facility-2. Shuttle Endeavour will remain in OPF-2 so that the orbiter maneuvering system (OMS) pods and forward reaction control system can be installed. Technicians also will offload water and Freon gas from lines located in Endeavour’s midbody. The work is part of Endeavour’s transition and retirement processing. The spacecraft is being prepared for public display at the California Science Center in Los Angeles. Endeavour flew 25 missions, spent 299 days in space, orbited Earth 4,671 times and traveled 122, 883, 151 miles over the course of its 19-year career. Endeavour’s STS-134 and final mission was completed after landing on June 1, 2011. Photo credit: Kim Shiflett

KSC-2012-1200

NASA Image and Video Library

2012-02-01

CAPE CANAVERAL, Fla. – At NASA’s Kennedy Space Center in Florida, technicians assist as space shuttle Endeavour is being towed from the Vehicle Assembly Building to Orbiter Processing Facility-2 (OPF-2). Shuttle Endeavour will remain in OPF-2 so that the orbiter maneuvering system (OMS) pods and forward reaction control system can be installed. Technicians also will offload water and Freon gas from lines located in Endeavour’s midbody. The work is part of Endeavour’s transition and retirement processing. The spacecraft is being prepared for public display at the California Science Center in Los Angeles. Endeavour flew 25 missions, spent 299 days in space, orbited Earth 4,671 times and traveled 122, 883, 151 miles over the course of its 19-year career. Endeavour’s STS-134 and final mission was completed after landing on June 1, 2011. Photo credit: Kim Shiflett

KSC-2012-1196

NASA Image and Video Library

2012-02-01

CAPE CANAVERAL, Fla. – At NASA’s Kennedy Space Center in Florida, technicians walk alongside as space shuttle Endeavour is being towed from the Vehicle Assembly Building to Orbiter Processing Facility-2. Shuttle Endeavour will remain in OPF-2 so that the orbiter maneuvering system (OMS) pods and forward reaction control system can be installed. Technicians also will offload water and Freon gas from lines located in Endeavour’s midbody. The work is part of Endeavour’s transition and retirement processing. The spacecraft is being prepared for public display at the California Science Center in Los Angeles. Endeavour flew 25 missions, spent 299 days in space, orbited Earth 4,671 times and traveled 122, 883, 151 miles over the course of its 19-year career. Endeavour’s STS-134 and final mission was completed after landing on June 1, 2011. Photo credit: Kim Shiflett

KSC-2012-1187

NASA Image and Video Library

2012-02-01

CAPE CANAVERAL, Fla. – Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, technicians prepare space shuttle Endeavour for its move to Orbiter Processing Facility-2 (OPF-2). Shuttle Endeavour will remain in OPF-2 so that the orbiter maneuvering system (OMS) pods and forward reaction control system can be installed. Technicians also will offload water and Freon gas from lines located in Endeavour’s midbody. The work is part of Endeavour’s transition and retirement processing. The spacecraft is being prepared for public display at the California Science Center in Los Angeles. Endeavour flew 25 missions, spent 299 days in space, orbited Earth 4,671 times and traveled 122, 883, 151 miles over the course of its 19-year career. Endeavour’s STS-134 and final mission was completed after landing on June 1, 2011. Photo credit: Kim Shiflett

KSC-2012-1199

NASA Image and Video Library

2012-02-01

CAPE CANAVERAL, Fla. – At NASA’s Kennedy Space Center in Florida, technicians assist as space shuttle Endeavour is being towed from the Vehicle Assembly Building to Orbiter Processing Facility-2 (OPF-2). Shuttle Endeavour will remain in OPF-2 so that the orbiter maneuvering system (OMS) pods and forward reaction control system can be installed. Technicians also will offload water and Freon gas from lines located in Endeavour’s midbody. The work is part of Endeavour’s transition and retirement processing. The spacecraft is being prepared for public display at the California Science Center in Los Angeles. Endeavour flew 25 missions, spent 299 days in space, orbited Earth 4,671 times and traveled 122, 883, 151 miles over the course of its 19-year career. Endeavour’s STS-134 and final mission was completed after landing on June 1, 2011. Photo credit: Kim Shiflett

KSC-2012-1193

NASA Image and Video Library

2012-02-01

CAPE CANAVERAL, Fla. – At NASA’s Kennedy Space Center in Florida, technicians walk alongside as space shuttle Endeavour is being towed from the Vehicle Assembly Building to Orbiter Processing Facility-2. Shuttle Endeavour will remain in OPF-2 so that the orbiter maneuvering system (OMS) pods and forward reaction control system can be installed. Technicians also will offload water and Freon gas from lines located in Endeavour’s midbody. The work is part of Endeavour’s transition and retirement processing. The spacecraft is being prepared for public display at the California Science Center in Los Angeles. Endeavour flew 25 missions, spent 299 days in space, orbited Earth 4,671 times and traveled 122, 883, 151 miles over the course of its 19-year career. Endeavour’s STS-134 and final mission was completed after landing on June 1, 2011. Photo credit: Kim Shiflett

Nuclear Technology. Course 28: Welding Inspection. Module 28-5, Qualifications.

ERIC Educational Resources Information Center

Espy, John

This fifth in a series of ten modules for a course titled Welding Inspection describes qualification requirements for welding procedures and welders and the role of the nuclear quality assurance/quality control technician. The module follows a typical format that includes the following sections: (1) introduction, (2) module prerequisites, (3)…

Nuclear Technology. Course 28: Welding Inspection. Module 28-1, Welding Fundamentals and Processes.

ERIC Educational Resources Information Center

Espy, John

This first in a series of ten modules for a course titled Welding Inspection describes the role and responsbilities of the quality assurance/quality control technician in welding inspections. The module follows a typical format that includes the following sections: (1) introduction, (2) module prerequisites, (3) objectives, (4) notes to…

Development of a Two-Year Associate Arts Degree in Environmental Health Technology.

ERIC Educational Resources Information Center

Campbell, Charles R.

The field of Environmental Health Technology (EHT) encompasses both the equipment and the trained expertise required to utilize land, water, energy, and minerals in the service of human health and welfare. EHT technicians work in disease control, licensing bureaus, hospitals, nursing homes, hazardous waste agencies, and other health agencies. In…

Half Sinful Words: Disguised Grief in "Ulysses."

ERIC Educational Resources Information Center

Hobbs, Michael

As a shrewd technician of the language, A. L. Tennyson rightly understood that words are not controllable; they do not always obey rules. As Tennyson said, words "half reveal and half conceal the soul within." In "Ulysses," the title character's speech to his fellow mariners--where he attempts to explain why he has decided to…

Inorganic Analysis in Water Quality Control Programs. Instructor's Guide.

ERIC Educational Resources Information Center

Kroner, Audrey

This two-part instructor's guide was designed for a five-day course for chemists and technicians with little or no experience in inorganic analyses. Part I provides information on course planning and management including course description, staff responsibilities, suggested course plan and agenda, timeline for planning and conducting the course,…

Nuclear Technology. Course 30: Mechanical Inspection. Module 30-6, Protective Coating Inspection.

ERIC Educational Resources Information Center

Espy, John

This sixth in a series of eight modules for a course titled Mechanical Inspection describes the duties of the nuclear quality assurance/quality control technician that are associated with protective coatings, and the national standards that govern the selection, application, and inspection of protective coatings for the reactor containment…

Assuring Quality Control of Clinical Education in Multiple Clinical Affiliates.

ERIC Educational Resources Information Center

Davis, Judith A.

A plan was developed to assure equivalency of clinical education among the medical laboratory technician (MLT) programs affiliated with Sandhills Community College. The plan was designed by faculty to monitor the quality of clinical courses offered by the clinical affiliates. The major strategies were to develop competencies, slide/tape modules, a…