Effects of diet on carcass quality and consumer taste panel acceptance of intact or castrated hair lambs

USDA-ARS?s Scientific Manuscript database

Forty hair-type lambs were examined in a 70-d study to determine the effects of gender (castrate; C vs. intact; I) and forage type on carcass traits and sensory acceptability. Lambs were procured from a single source in Missouri and one-half were randomly castrated. Lambs were randomly assigned to t...

Broadband Transmission Loss Due to Reverberant Excitation

NASA Technical Reports Server (NTRS)

Barisciano, Lawrence P. Jr.

1999-01-01

The noise transmission characteristics of candidate curved aircraft sidewall panel constructions is examined analytically using finite element models of the selected panel geometries. The models are validated by experimental modal analyses and transmission loss testing. The structural and acoustic response of the models are then examined when subjected to random or reverberant excitation, the simulation of which is also discussed. For a candidate curved honeycomb panel, the effect of add-on trim panel treatments is examined. Specifically, two different mounting configurations are discussed and their effect on the transmission loss of the panel is presented. This study finds that the add-on acoustical treatments do improve on the primary structures transmission loss characteristics, however, much more research is necessary to draw any valid conclusions about the optimal configuration for the maximum noise transmission loss. This paper describes several directions for the extension of this work.

(Pea)nuts and bolts of visual narrative: Structure and meaning in sequential image comprehension

PubMed Central

Cohn, Neil; Paczynski, Martin; Jackendoff, Ray; Holcomb, Phillip J.; Kuperberg, Gina R.

2012-01-01

Just as syntax differentiates coherent sentences from scrambled word strings, the comprehension of sequential images must also use a cognitive system to distinguish coherent narrative sequences from random strings of images. We conducted experiments analogous to two classic studies of language processing to examine the contributions of narrative structure and semantic relatedness to processing sequential images. We compared four types of comic strips: 1) Normal sequences with both structure and meaning, 2) Semantic Only sequences (in which the panels were related to a common semantic theme, but had no narrative structure), 3) Structural Only sequences (narrative structure but no semantic relatedness), and 4) Scrambled sequences of randomly-ordered panels. In Experiment 1, participants monitored for target panels in sequences presented panel-by-panel. Reaction times were slowest to panels in Scrambled sequences, intermediate in both Structural Only and Semantic Only sequences, and fastest in Normal sequences. This suggests that both semantic relatedness and narrative structure offer advantages to processing. Experiment 2 measured ERPs to all panels across the whole sequence. The N300/N400 was largest to panels in both the Scrambled and Structural Only sequences, intermediate in Semantic Only sequences and smallest in the Normal sequences. This implies that a combination of narrative structure and semantic relatedness can facilitate semantic processing of upcoming panels (as reflected by the N300/N400). Also, panels in the Scrambled sequences evoked a larger left-lateralized anterior negativity than panels in the Structural Only sequences. This localized effect was distinct from the N300/N400, and appeared despite the fact that these two sequence types were matched on local semantic relatedness between individual panels. These findings suggest that sequential image comprehension uses a narrative structure that may be independent of semantic relatedness. Altogether, we argue that the comprehension of visual narrative is guided by an interaction between structure and meaning. PMID:22387723

A research program to reduce interior noise in general aviation airplanes. Influence of depressurization and damping material on the noise reduction characteristics of flat and curved stiffened panels

NASA Technical Reports Server (NTRS)

Navaneethan, R.; Streeter, B.; Koontz, S.; Roskam, J.

1981-01-01

Some 20 x 20 aluminum panels were studied in a frequency range from 20 Hz to 5000 Hz. The noise sources used were a swept sine wave generator and a random noise generator. The effect of noise source was found to be negligible. Increasing the pressure differential across the panel gave better noise reduction below the fundamental resonance frequency due to an increase in stiffness. The largest increase occurred in the first 1 psi pressure differential. The curved, stiffened panel exhibited similar behavior, but with a lower increase of low frequency noise reduction. Depressurization on these panels resulted in decreased noise reduction at higher frequencies. The effect of damping tapes on the overall noise reduction values of the test specimens was small away from the resonance frequency. In the mass-law region, a slight and proportional improvement in noise reduction was observed by adding damping material. Adding sound absorbtion material to a panel with damping material beneficially increased noise reduction at high frequencies.

A Randomized, Controlled Trial of a Shared Panel Management Program for Small Practices.

PubMed

Bishop, Tara F; Ryan, Andrew M; Chen, Melinda A; Mendelsohn, Jayme; Gottlieb, Daniel; Shih, Sarah; Desai, Priya; Wolff, Elizabeth A; Casalino, Lawrence P

2016-10-01

To determine whether a shared panel management program was effective at improving quality of care for patients with uncontrolled chronic disease. Data were extracted from electronic health records. Randomized controlled trial of a panel management program initiated by New York City Department of Health and Mental Hygiene. Patients from 20 practices with an uncontrolled chronic disease and a lapse in care were assigned to the intervention (a phone call requesting that the patient schedule a physician appointment) or usual care. Outcomes were visits to physician practices, body mass index measurement, blood pressure measurement and control, use of antithrombotics, and low-density lipoprotein measurement and control. Panel managers were able to successfully speak with 1,676 patients (14.7 percent of the intervention group). There were no significant differences in outcomes between the intervention and usual care groups. Successfully contacted patients were more likely to have an office visit within 1 year of randomization (45.6 percent [95 percent CI: 22.8, 26.9] vs. 38.1 percent [95 percent CI: 36.8, 39.3]) and more likely to be on antithrombotics (24.4 percent [95 percent CI: 17.7, 31.0]) versus those in the usual care group (17.0 percent [95 percent CI: 13.9, 20.0]) but had no other difference in quality. A shared, low-intensity panel management program run by a city health department did not improve quality of care for patients with chronic illnesses and lapses in care. © Health Research and Educational Trust.

Modal sound transmission loss of a single leaf panel: Asymptotic solutions.

PubMed

Wang, Chong

2015-12-01

In a previously published paper [C. Wang, J. Acoust. Soc. Am. 137(6), 3514-3522 (2015)], the modal sound transmission coefficients of a single leaf panel were discussed with regard to the inter-modal coupling effects. By incorporating such effect into the equivalent modal radiation impedance, which is directly related to the modal sound transmission coefficient of each mode, the overall sound transmission loss for both normal and randomized sound incidences was computed through a simple modal superposition. Benefiting from the analytical expressions of the equivalent modal impedance and modal transmission coefficients, in this paper, behaviors of modal sound transmission coefficients in several typical frequency ranges are discussed in detail. Asymptotic solutions are also given for the panels with relatively low bending stiffnesses, for which the sound transmission loss has been assumed to follow the mass law of a limp panel. Results are also compared to numerical analysis and the renowned mass law theories.

The Effect of Recent Tax Changes on Taxable Income: Evidence from a New Panel of Tax Returns

ERIC Educational Resources Information Center

Heim, Bradley T.

2009-01-01

This paper estimates the elasticity of taxable income to the net-of-tax share using a panel of tax returns that follows a random sample of taxpayers from 1999 to 2005, spanning the EGTRRA 2001 and JGTRRA 2003 tax changes. Results suggest that the elasticity of taxable income to the current year's net-of-tax share lies between 0.3 and 0.4 overall,…

Spatiotemporal and random parameter panel data models of traffic crash fatalities in Vietnam.

PubMed

Truong, Long T; Kieu, Le-Minh; Vu, Tuan A

2016-09-01

This paper investigates factors associated with traffic crash fatalities in 63 provinces of Vietnam during the period from 2012 to 2014. Random effect negative binomial (RENB) and random parameter negative binomial (RPNB) panel data models are adopted to consider spatial heterogeneity across provinces. In addition, a spatiotemporal model with conditional autoregressive priors (ST-CAR) is utilised to account for spatiotemporal autocorrelation in the data. The statistical comparison indicates the ST-CAR model outperforms the RENB and RPNB models. Estimation results provide several significant findings. For example, traffic crash fatalities tend to be higher in provinces with greater numbers of level crossings. Passenger distance travelled and road lengths are also positively associated with fatalities. However, hospital densities are negatively associated with fatalities. The safety impact of the national highway 1A, the main transport corridor of the country, is also highlighted. Copyright © 2016 Elsevier Ltd. All rights reserved.

Sonic fatigue testing of an advanced composite aileron

NASA Technical Reports Server (NTRS)

Soovere, J.

1982-01-01

The sonic fatigue test program to verify the design of the composite inboard aileron for the L-1011 airplane is described. The composite aileron is fabricated from graphite/epoxy minisandwich covers which are attached to graphite/epoxy front spar and ribs, and to an aluminum rear spar with fasteners. The program covers the development of random fatigue data by means of coupon testing and modal studies on a representative section of the composite aileron, culminating in the accelerated sonic fatigue proof test. The composite aileron sustained nonlinear panel vibration during the proof test without failure. Viscous damping coefficients as low as 0.4% were measured on the panels. The effects of moisture conditioning and elevated temperature on the random fatigue life of both undamaged and impact damaged coupons were investigated. The combination of impact damage, moisture, and a 180 F temperature could reduce the random fatigue life by 50%.

Panel Estimates of Male-Female Earnings Functions.

ERIC Educational Resources Information Center

Kim, Moon-Kak; Polachek, Solomon W.

1994-01-01

Application of single and simultaneous equation fixed-effects and random-effects shows that earnings appreciation with experience and depreciation with labor market interruptions are comparable for men and women. Adjusting for heterogeneity reduces the wage gap to 20%; adjusting for endogeneity reduces it nearly to zero. (SK)

The spatial impact of neighbouring on the exports activities of COMESA countries by using spatial panel models

NASA Astrophysics Data System (ADS)

Hamzalouh, L.; Ismail, M. T.; Rahman, R. A.

2017-09-01

In this paper, spatial panel models were used and the method for selecting the best model amongst the spatial fixed effects model and the spatial random effects model to estimate the fitting model by using the robust Hausman test for analysis of the exports pattern of the Common Market for Eastern and Southern African (COMESA) countries. And examine the effects of the interactions of the economic statistic of explanatory variables on the exports of the COMESA. Results indicated that the spatial Durbin model with fixed effects specification should be tested and considered in most cases of this study. After that, the direct and indirect effects among COMESA regions were assessed, and the role of indirect spatial effects in estimating exports was empirically demonstrated. Regarding originality and research value, and to the best of the authors’ knowledge, this is the first attempt to examine exports between COMESA and its member countries through spatial panel models using XSMLE, which is a new command for spatial analysis using STATA.

Negative Effect of Acoustic Panels on Listening Effort in a Classroom Environment.

PubMed

Amlani, Amyn M; Russo, Timothy A

Acoustic panels are used to lessen the pervasive effects of noise and reverberation on speech understanding in a classroom environment. These panels, however, predominately absorb high-frequency energy important to speech understanding. Therefore, a classroom environment treated with acoustic panels might negatively influence the transmission of the target signal, resulting in an increase in listening effort exerted by the listener. Acoustic panels were installed in a public school environment that did not meet the ANSI-recommended guidelines for classroom design. We assessed the modifications to the acoustic climate by quantifying the effect of (1) acoustic panel (i.e., without, with) on the transmission of a standardized target signal at different seat positions (i.e., A-D) using the Speech Transmission Index (STI) and (2) acoustic panel and seat position on listening-effort performance in a group of third-grade students having normal-hearing sensitivity using a dual-task paradigm. STI measurements are described qualitatively. We used a repeated-measures randomized design to assess listening-effort performance of monosyllabic words in a primary task and digit recall in a secondary task for the independent variables of acoustic panel and seat position. Twenty-seven, third-grade students (12 males, 15 females), ranging in age from 8.3 to 9.4 yr (mean = 8.7 yr, standard deviation = 0.7), participated in this study. Qualitatively, we performed STI measurements under both testing conditions (i.e., panel and seat location). For the primary task of the dual-task paradigm, participants heard a ten-item list of monosyllabic words (i.e., ten words per list) recorded through a manikin in the classroom environment without and with acoustic panels and at different seat positions. Participants were asked to repeat each word exactly as it was heard. During the secondary task, participants were shown a single, random string of five digits before the presentation of the monosyllabic words. After each list in the primary task was completed, participants were asked to recall the string of five digits verbatim. Word-recognition and digit-recall performance decreased with the presence of acoustic panels and as the distance from the target signal to a given seat location increased. The results were validated using the STI, as indicated by a decrease in the transmission of the target signal in the presence of acoustic panel and as the distance to a given seat location increased. The inclusion of acoustic panels reduced the negative effects of noise and reverberation in a classroom environment, resulting in an acoustic climate that complied with the ANSI-recommended guidelines for classroom design. Results, however, revealed that participants required an increased amount of mental effort when the classroom was modified with acoustic treatment compared to no acoustic treatment. Independent of acoustic treatment, mental effort was greatest at seat locations beyond the critical distance (CD). With the addition of acoustic panels, mental effort was found to increase significantly at seat locations beyond the CD compared to the unmodified room condition. Overall, results indicate that increasing the distance between the teacher and child has a detrimental impact on mental effort and, ultimately, academic performance. American Academy of Audiology

Second Thoughts on Drug Testing: Balancing Students' Health and Welfare with Their Expectations of Privacy.

ERIC Educational Resources Information Center

Dowling-Sendor, Benjamin

2000-01-01

In its "stare decisis" ruling upholding a Pennsylvania school district's random drug-testing policy, a three-judge panel of the Seventh Circuit Court of Appeals nonetheless declared its disagreement with a similar panel's 1998 decision upholding another district's policy of random, suspicionless drug, alcohol, and tobacco testing. (MLH)

Life Course Changes of Children and Well-Being of Parents

ERIC Educational Resources Information Center

Kalmijn, Matthijs; De Graaf, Paul M.

2012-01-01

How do children's life course transitions affect the well-being of their parents? Using a large panel survey among parents with longitudinal information on 2 randomly chosen children, the authors analyzed the effects of children's union formation, parenthood, and union dissolution on changes in depressive symptoms of parents. Negative effects were…

Sound Transmission Through Multi-Panel Structures Lined with Elastic Porous Materials

NASA Astrophysics Data System (ADS)

Bolton, J. S.; Shiau, N.-M.; Kang, Y. J.

1996-04-01

Theory and measurements related to sound transmission through double panels lined with elastic porous media are presented. The information has application to the design of noise control barriers and to the optimization of aircraft fuselage transmission loss, for example. The major difference between the work described here and earlier research in this field relates to the treatment of the porous material that is used to line the cavity between the two panels of the double panel structure. Here we have used the porous material theory proposed by Biot since it takes explicit account of all the wave types known to propagate in elastic porous materials. As a result, it is possible to use the theory presented here to calculate the transmission loss of lined double panels at arbitrary angles of incidence; results calculated over a range of incidence angles may then be combined to yield the random incidence transmission loss. In this paper, the equations governing wave propagation in an elastic porous material are first considered briefly and then the general forms for the stresses and displacements within the porous material are given. Those solutions are expressed in terms of a number of constants that can be determined by application of appropriate boundary conditions. The boundary conditions required to model double panels having linings that are either directly attached to the facing panels or separated?!from them by air gaps are presented and discussed. Measurements of the random incidence transmission loss of aluminium double-panel structures lined with polyurethane foam are presented and have been found to be in good agreement with theoretical predictions. Both the theoretical predictions and the measured results have shown that the method by which an elastic porous lining material is attached to the facing panels can have a profound influence on the transmission loss of the panel system. It has been found, for example, that treatments in which the lining material is not directly attached to the facing panels are generally to be preferred to those in which the lining is directly bonded to the panels. These effects may be explained by considering the degree to which the various wave types within the elastic porous material are excited, which in turn can be related to the method by which the lining is mounted to the facing panels.

Effect of randomness on multi-frequency aeroelastic responses resolved by Unsteady Adaptive Stochastic Finite Elements

NASA Astrophysics Data System (ADS)

Witteveen, Jeroen A. S.; Bijl, Hester

2009-10-01

The Unsteady Adaptive Stochastic Finite Elements (UASFE) method resolves the effect of randomness in numerical simulations of single-mode aeroelastic responses with a constant accuracy in time for a constant number of samples. In this paper, the UASFE framework is extended to multi-frequency responses and continuous structures by employing a wavelet decomposition pre-processing step to decompose the sampled multi-frequency signals into single-frequency components. The effect of the randomness on the multi-frequency response is then obtained by summing the results of the UASFE interpolation at constant phase for the different frequency components. Results for multi-frequency responses and continuous structures show a three orders of magnitude reduction of computational costs compared to crude Monte Carlo simulations in a harmonically forced oscillator, a flutter panel problem, and the three-dimensional transonic AGARD 445.6 wing aeroelastic benchmark subject to random fields and random parameters with various probability distributions.

A probabilistic fatigue analysis of multiple site damage

NASA Technical Reports Server (NTRS)

Rohrbaugh, S. M.; Ruff, D.; Hillberry, B. M.; Mccabe, G.; Grandt, A. F., Jr.

1994-01-01

The variability in initial crack size and fatigue crack growth is incorporated in a probabilistic model that is used to predict the fatigue lives for unstiffened aluminum alloy panels containing multiple site damage (MSD). The uncertainty of the damage in the MSD panel is represented by a distribution of fatigue crack lengths that are analytically derived from equivalent initial flaw sizes. The variability in fatigue crack growth rate is characterized by stochastic descriptions of crack growth parameters for a modified Paris crack growth law. A Monte-Carlo simulation explicitly describes the MSD panel by randomly selecting values from the stochastic variables and then grows the MSD cracks with a deterministic fatigue model until the panel fails. Different simulations investigate the influences of the fatigue variability on the distributions of remaining fatigue lives. Six cases that consider fixed and variable conditions of initial crack size and fatigue crack growth rate are examined. The crack size distribution exhibited a dominant effect on the remaining fatigue life distribution, and the variable crack growth rate exhibited a lesser effect on the distribution. In addition, the probabilistic model predicted that only a small percentage of the life remains after a lead crack develops in the MSD panel.

Experimental vibroacoustic testing of plane panels using synthesized random pressure fields.

PubMed

Robin, Olivier; Berry, Alain; Moreau, Stéphane

2014-06-01

The experimental reproduction of random pressure fields on a plane panel and corresponding induced vibrations is studied. An open-loop reproduction strategy is proposed that uses the synthetic array concept, for which a small array element is moved to create a large array by post-processing. Three possible approaches are suggested to define the complex amplitudes to be imposed to the reproduction sources distributed on a virtual plane facing the panel to be tested. Using a single acoustic monopole, a scanning laser vibrometer and a baffled simply supported aluminum panel, experimental vibroacoustic indicators such as the Transmission Loss for Diffuse Acoustic Field, high-speed subsonic and supersonic Turbulent Boundary Layer excitations are obtained. Comparisons with simulation results obtained using a commercial software show that the Transmission Loss estimation is possible under both excitations. Moreover and as a complement to frequency domain indicators, the vibroacoustic behavior of the panel can be studied in the wave number domain.

[Efficacy evaluation of lafutidine for mild reflux esophagitis in Japanese patients].

PubMed

Ohara, Shuichi; Haruma, Ken; Kinoshita, Yoshikazu; Kusano, Motoyasu

2010-04-01

To evaluate the efficacy of lafutidine (20mg) , famotidine (40mg) and placebo in patients with mild reflux esophagitis (Grades A and B according to the Los Angeles classification) , a double-blind, multicenter, randomized clinical trial was performed for the first time in Japanese patients. In addition to each physician's evaluation, efficacy was evaluated by judging panels using images submitted by each physician. The healing rate after 8 weeks for lafutidine, famotidine and placebo were 67.7%, 56.6% and 41.2%, respectively. Lafutidine was significantly more effective than placebo (p=0.002, according to the judging panels) . Based on the evaluation of endoscopic images by the judging panels, 91 (27.1%) of 336 images submitted by each physician were judged to not be mucosal breaks. Judging panels are considered one of the ways to resolve the problem of the need to unify the criteria.

Comparison the Effects of Health Indicators on Male and Female Labor Supply, Evidence from Panel Data of Eastern Mediterranean Countries 1995-2010

PubMed Central

HOMAIE RAD, Enayatollah; HADIAN, Mohamad; GHOLAMPOOR, Hanie

2014-01-01

Abstract Background Skilled labor force is very important in economic growth. Workers become skilled when they are healthy and able to be educated and work. In this study, we estimated the effects of health indicators on labor supply. We used labor force participation rate as the indicator of labor supply. We categorized this indicator into 2 indicators of female and male labor force participation rates and compared the results of each estimate with the other. Methods This study was done in eastern Mediterranean countries between 1995 and 2011. We used a panel cointegration approach for estimating the models. We used Pesaran cross sectional dependency, Pesaran unit root test, and Westerlund panel cointegration for this issue. At the end, after confirmation of having random effect models, we estimated them with random effects. Results Increasing the fertility rate decreased the female labor supply, but increased the male labor supply. However, public health expenditures increased the female labor supply, but decreased the male labor supply because of substitution effects. Similar results were found regarding urbanization. Gross domestic product had a positive relationship with female labor supply, but not with male labor supply. Besides, out of pocket health expenditures had a negative relationship with male labor supply, but no significant relationships with female labor supply. Conclusion The effects of the health variables were more severe in the female labor supply model compared to the male model. Countries must pay attention to women’s health more and more to change the labor supply. PMID:26060746

Effects of external and gap mean flows on sound transmission through a double-wall sandwich panel

NASA Astrophysics Data System (ADS)

Liu, Yu; Sebastian, Alexis

2015-05-01

This paper studies analytically the effects of an external mean flow and an internal gap mean flow on sound transmission through a double-wall sandwich panel lined with poroelastic materials. Biot's theory is employed to describe wave propagation in poroelastic materials, and the transfer matrix method with three types of boundary conditions is applied to solve the system simultaneously. The random incidence transmission loss in a diffuse field is calculated numerically, and the limiting angle of incidence due to total internal reflection is discussed in detail. The numerical predictions suggest that the sound insulation performance of such a double-wall panel is enhanced considerably by both external and gap mean flows particularly in the high-frequency range. Similar effects on transmission loss are observed for the two mean flows. It is shown that the effect of the gap mean flow depends on flow velocity, flow direction, gap depth and fluid properties and also that the fluid properties within the gap appear to influence the transmission loss more effectively than the gap flow. Despite the implementation difficulty in practice, an internal gap flow provides more design space for tuning the sound insulation performance of a double-wall sandwich panel and has great potential for active/passive noise control.

Effects of relationship duration, cohabitation, and marriage on the frequency of intercourse in couples: Findings from German panel data.

PubMed

Schröder, Jette; Schmiedeberg, Claudia

2015-07-01

Research into the changes in the frequency of sexual intercourse is (with few exceptions) limited to cross-sectional analyses of marital duration. We investigate the frequency of intercourse while taking into account relationship duration as well as the duration of cohabitation and marriage, effects of parenthood, and relationship quality. For the analysis we apply fixed effects regression models using data from the German Family Panel (pairfam), a nationwide randomly sampled German panel survey. Our findings imply that the drop in sex frequency occurs early in the relationship, whereas neither cohabitation nor marriage affects the frequency of intercourse to a significant extent. Sex frequency is reduced during pregnancy and as long as the couple has small children, but becomes revived later on. Relationship quality is found to play a role as well. These results are contrary to the honeymoon effect found in earlier research, but indicate that in times of postponed marriage an analogous effect may be at work in the initial period of the relationship. Copyright © 2015 Elsevier Inc. All rights reserved.

Panel regressions to estimate low-flow response to rainfall variability in ungaged basins

USGS Publications Warehouse

Bassiouni, Maoya; Vogel, Richard M.; Archfield, Stacey A.

2016-01-01

Multicollinearity and omitted-variable bias are major limitations to developing multiple linear regression models to estimate streamflow characteristics in ungaged areas and varying rainfall conditions. Panel regression is used to overcome limitations of traditional regression methods, and obtain reliable model coefficients, in particular to understand the elasticity of streamflow to rainfall. Using annual rainfall and selected basin characteristics at 86 gaged streams in the Hawaiian Islands, regional regression models for three stream classes were developed to estimate the annual low-flow duration discharges. Three panel-regression structures (random effects, fixed effects, and pooled) were compared to traditional regression methods, in which space is substituted for time. Results indicated that panel regression generally was able to reproduce the temporal behavior of streamflow and reduce the standard errors of model coefficients compared to traditional regression, even for models in which the unobserved heterogeneity between streams is significant and the variance inflation factor for rainfall is much greater than 10. This is because both spatial and temporal variability were better characterized in panel regression. In a case study, regional rainfall elasticities estimated from panel regressions were applied to ungaged basins on Maui, using available rainfall projections to estimate plausible changes in surface-water availability and usable stream habitat for native species. The presented panel-regression framework is shown to offer benefits over existing traditional hydrologic regression methods for developing robust regional relations to investigate streamflow response in a changing climate.

Panel regressions to estimate low-flow response to rainfall variability in ungaged basins

NASA Astrophysics Data System (ADS)

Bassiouni, Maoya; Vogel, Richard M.; Archfield, Stacey A.

2016-12-01

Multicollinearity and omitted-variable bias are major limitations to developing multiple linear regression models to estimate streamflow characteristics in ungaged areas and varying rainfall conditions. Panel regression is used to overcome limitations of traditional regression methods, and obtain reliable model coefficients, in particular to understand the elasticity of streamflow to rainfall. Using annual rainfall and selected basin characteristics at 86 gaged streams in the Hawaiian Islands, regional regression models for three stream classes were developed to estimate the annual low-flow duration discharges. Three panel-regression structures (random effects, fixed effects, and pooled) were compared to traditional regression methods, in which space is substituted for time. Results indicated that panel regression generally was able to reproduce the temporal behavior of streamflow and reduce the standard errors of model coefficients compared to traditional regression, even for models in which the unobserved heterogeneity between streams is significant and the variance inflation factor for rainfall is much greater than 10. This is because both spatial and temporal variability were better characterized in panel regression. In a case study, regional rainfall elasticities estimated from panel regressions were applied to ungaged basins on Maui, using available rainfall projections to estimate plausible changes in surface-water availability and usable stream habitat for native species. The presented panel-regression framework is shown to offer benefits over existing traditional hydrologic regression methods for developing robust regional relations to investigate streamflow response in a changing climate.

Response of space shuttle insulation panels to acoustic noise pressure

NASA Technical Reports Server (NTRS)

Vaicaitis, R.

1976-01-01

The response of reusable space shuttle insulation panels to random acoustic pressure fields are studied. The basic analytical approach in formulating the governing equations of motion uses a Rayleigh-Ritz technique. The input pressure field is modeled as a stationary Gaussian random process for which the cross-spectral density function is known empirically from experimental measurements. The response calculations are performed in both frequency and time domain.

Inward Leakage Variability between Respirator Fit Test Panels – Part I. Deterministic Approach

PubMed Central

Zhuang, Ziqing; Liu, Yuewei; Coffey, Christopher C.; Miller, Colleen; Szalajda, Jonathan

2015-01-01

Inter-panel variability has never been investigated. The objective of this study was to determine the variability between different anthropometric panels used to determine the inward leakage (IL) of N95 filtering facepiece respirators (FFRs) and elastomeric half-mask respirators (EHRs). A total of 144 subjects, who were both experienced and non-experienced N95 FFR users, were recruited. Five N95 FFRs and five N95 EHRs were randomly selected from among those models tested previously in our laboratory. The PortaCount Pro+ (without N95-Companion) was used to measure IL of the ambient particles with a detectable size range of 0.02 to 1 μm. The Occupational Safety and Health Administration standard fit test exercises were used for this study. IL test were performed for each subject using each of the 10 respirators. Each respirator/subject combination was tested in duplicate, resulting in a total 20 IL tests for each subject. Three 35-member panels were randomly selected without replacement from the 144 study subjects stratified by the National Institute for Occupational Safety and Health bivariate panel cell for conducting statistical analyses. The geometric mean (GM) IL values for all 10 studied respirators were not significantly different among the three randomly selected 35-member panels. Passing rate was not significantly different among the three panels for all respirators combined or by each model. This was true for all IL pass/fail levels of 1%, 2%, and 5%. Using 26 or more subjects to pass the IL test, all three panels had consistent passing/failing results for pass/fail levels of 1% and 5%. Some disagreement was observed for the 2% pass/fail level. Inter-panel variability exists, but it is small relative to the other sources of variation in fit testing data. The concern about inter-panel variability and other types of variability can be alleviated by properly selecting: pass/fail level (IL 1–5%); panel size (e.g., 25 or 35); and minimum number of subjects required to pass (e.g., 26 of 35 or 23 of 35). PMID:26011282

Simultaneous genomic identification and profiling of a single cell using semiconductor-based next generation sequencing.

PubMed

Watanabe, Manabu; Kusano, Junko; Ohtaki, Shinsaku; Ishikura, Takashi; Katayama, Jin; Koguchi, Akira; Paumen, Michael; Hayashi, Yoshiharu

2014-09-01

Combining single-cell methods and next-generation sequencing should provide a powerful means to understand single-cell biology and obviate the effects of sample heterogeneity. Here we report a single-cell identification method and seamless cancer gene profiling using semiconductor-based massively parallel sequencing. A549 cells (adenocarcinomic human alveolar basal epithelial cell line) were used as a model. Single-cell capture was performed using laser capture microdissection (LCM) with an Arcturus® XT system, and a captured single cell and a bulk population of A549 cells (≈ 10(6) cells) were subjected to whole genome amplification (WGA). For cell identification, a multiplex PCR method (AmpliSeq™ SNP HID panel) was used to enrich 136 highly discriminatory SNPs with a genotype concordance probability of 10(31-35). For cancer gene profiling, we used mutation profiling that was performed in parallel using a hotspot panel for 50 cancer-related genes. Sequencing was performed using a semiconductor-based bench top sequencer. The distribution of sequence reads for both HID and Cancer panel amplicons was consistent across these samples. For the bulk population of cells, the percentages of sequence covered at coverage of more than 100 × were 99.04% for the HID panel and 98.83% for the Cancer panel, while for the single cell percentages of sequence covered at coverage of more than 100 × were 55.93% for the HID panel and 65.96% for the Cancer panel. Partial amplification failure or randomly distributed non-amplified regions across samples from single cells during the WGA procedures or random allele drop out probably caused these differences. However, comparative analyses showed that this method successfully discriminated a single A549 cancer cell from a bulk population of A549 cells. Thus, our approach provides a powerful means to overcome tumor sample heterogeneity when searching for somatic mutations.

The Living Arrangement Dynamics of Sick, Elderly Individuals

ERIC Educational Resources Information Center

Dostie, Benoit; Leger, Pierre Thomas

2005-01-01

We model the dynamics associated with living-arrangement decisions of sick elderly individuals. Using the Panel Study of Income Dynamics? Parental Health Supplement, we construct the complete living-arrangement histories of elderly individuals in need of care. We use a simultaneous random-effects competing-risks model to analyze the impact of…

A synthesis approach for reproducing the response of aircraft panels to a turbulent boundary layer excitation.

PubMed

Bravo, Teresa; Maury, Cédric

2011-01-01

Random wall-pressure fluctuations due to the turbulent boundary layer (TBL) are a feature of the air flow over an aircraft fuselage under cruise conditions, creating undesirable effects such as cabin noise annoyance. In order to test potential solutions to reduce the TBL-induced noise, a cost-efficient alternative to in-flight or wind-tunnel measurements involves the laboratory simulation of the response of aircraft sidewalls to high-speed subsonic TBL excitation. Previously published work has shown that TBL simulation using a near-field array of loudspeakers is only feasible in the low frequency range due to the rapid decay of the spanwise correlation length with frequency. This paper demonstrates through theoretical criteria how the wavenumber filtering capabilities of the radiating panel reduces the number of sources required, thus dramatically enlarging the frequency range over which the response of the TBL-excited panel is accurately reproduced. Experimental synthesis of the panel response to high-speed TBL excitation is found to be feasible over the hydrodynamic coincidence frequency range using a reduced set of near-field loudspeakers driven by optimal signals. Effective methodologies are proposed for an accurate reproduction of the TBL-induced sound power radiated by the panel into a free-field and when coupled to a cavity.

Comparative Emissions of Random Orbital Sanding between Conventional and Self-Generated Vacuum Systems

PubMed Central

Liverseed, David R.

2013-01-01

Conventional abrasive sanding generates high concentrations of particles. Depending on the substrate being abraded and exposure duration, overexposure to the particles can cause negative health effects ranging from respiratory irritation to cancer. The goal of this study was to understand the differences in particle emissions between a conventional random orbital sanding system and a self-generated vacuum random orbital sanding system with attached particle filtration bag. Particle concentrations were sampled for each system in a controlled test chamber for oak wood, chromate painted (hexavalent chromium) steel panels, and gel-coated (titanium dioxide) fiberglass panels using a Gesamtstaub-Probenahmesystem (GSP) sampler at three different locations adjacent to the sanding. Elevated concentrations were reported for all particles in the samples collected during conventional sanding. The geometric mean concentration ratios for the three substrates ranged from 320 to 4640 times greater for the conventional sanding system than the self-generated vacuum sanding system. The differences in the particle concentration generated by the two sanding systems were statistically significant with the two sample t-test (P < 0.0001) for all three substances. The data suggest that workers using conventional sanding systems could utilize the self-generated vacuum sanding system technology to potentially reduce exposure to particles and mitigate negative health effects. PMID:23065674

Comparative emissions of random orbital sanding between conventional and self-generated vacuum systems.

PubMed

Liverseed, David R; Logan, Perry W; Johnson, Carl E; Morey, Sandy Z; Raynor, Peter C

2013-03-01

Conventional abrasive sanding generates high concentrations of particles. Depending on the substrate being abraded and exposure duration, overexposure to the particles can cause negative health effects ranging from respiratory irritation to cancer. The goal of this study was to understand the differences in particle emissions between a conventional random orbital sanding system and a self-generated vacuum random orbital sanding system with attached particle filtration bag. Particle concentrations were sampled for each system in a controlled test chamber for oak wood, chromate painted (hexavalent chromium) steel panels, and gel-coated (titanium dioxide) fiberglass panels using a Gesamtstaub-Probenahmesystem (GSP) sampler at three different locations adjacent to the sanding. Elevated concentrations were reported for all particles in the samples collected during conventional sanding. The geometric mean concentration ratios for the three substrates ranged from 320 to 4640 times greater for the conventional sanding system than the self-generated vacuum sanding system. The differences in the particle concentration generated by the two sanding systems were statistically significant with the two sample t-test (P < 0.0001) for all three substances. The data suggest that workers using conventional sanding systems could utilize the self-generated vacuum sanding system technology to potentially reduce exposure to particles and mitigate negative health effects.

Cooperation without culture? The null effect of generalized trust on intentional homicide: a cross-national panel analysis, 1995-2009.

PubMed

Robbins, Blaine

2013-01-01

Sociologists, political scientists, and economists all suggest that culture plays a pivotal role in the development of large-scale cooperation. In this study, I used generalized trust as a measure of culture to explore if and how culture impacts intentional homicide, my operationalization of cooperation. I compiled multiple cross-national data sets and used pooled time-series linear regression, single-equation instrumental-variables linear regression, and fixed- and random-effects estimation techniques on an unbalanced panel of 118 countries and 232 observations spread over a 15-year time period. Results suggest that culture and large-scale cooperation form a tenuous relationship, while economic factors such as development, inequality, and geopolitics appear to drive large-scale cooperation.

An INAR(1) Negative Multinomial Regression Model for Longitudinal Count Data.

ERIC Educational Resources Information Center

Bockenholt, Ulf

1999-01-01

Discusses a regression model for the analysis of longitudinal count data in a panel study by adapting an integer-valued first-order autoregressive (INAR(1)) Poisson process to represent time-dependent correlation between counts. Derives a new negative multinomial distribution by combining INAR(1) representation with a random effects approach.…

The Richer, the Happier? An Empirical Investigation in Selected European Countries

ERIC Educational Resources Information Center

Seghieri, Chiara; Desantis, Gustavo; Tanturri, Maria Letizia

2006-01-01

This study analyses the relationship between subjective and objective measures of well-being in selected European countries using the data of the European Community Household Panel (ECHP). In the first part of the paper, we develop a random-effect ordered probit model, separately for each country, relating the subjective measure of income…

Income Transfers and Assets of the Poor. Revised. Discussion Paper.

ERIC Educational Resources Information Center

Ziliak, James P.

Contrary to the predictions of the standard life-cycle model, many low lifetime-income households accumulate little wealth relative to their incomes compared to households with high lifetime income. This paper uses data from the Panel Study of Income Dynamics and a correlated random-effects generalized model of moments estimator to decompose the…

Professional opinion concerning the effectiveness of bracing relative to observation in adolescent idiopathic scoliosis.

PubMed

Dolan, Lori A; Donnelly, Melanie J; Spratt, Kevin F; Weinstein, Stuart L

2007-01-01

To determine if community equipoise exists concerning the effectiveness of bracing in adolescent idiopathic scoliosis. Bracing is the standard of care for adolescent idiopathic scoliosis despite the lack of strong reasearch evidence concerning its effectiveness. Thus, some researchers support the idea of a randomized trial, whereas others think that randomization in the face of a standard of care would be unethical. A random of Scoliosis Research Society and Pediatric Orthopaedic Society of North America members were asked to consider 12 clinical profiles and to give their opinion concerning the radiographic outcomes after observation and bracing. An expert panel was created from the respondents. They expressed a wide array of opinions concerning the percentage of patients within each scenario who would benefit from bracing. Agreement was noted concerning the risk due to bracing for post-menarchal patients only. : This study found a high degree of variability in opinion among clinicians concerning the effectiveness of bracing, suggesting that a randomized trial of bracing would be ethical.

The Use of a Nonprobability Internet Panel to Monitor Sexual and Reproductive Health in the General Population

ERIC Educational Resources Information Center

Legleye, Stéphane; Charrance, Géraldine; Razafindratsima, Nicolas; Bajos, Nathalie; Bohet, Aline; Moreau, Caroline

2018-01-01

Background: Reliability of nonprobability online volunteer panels for epidemiological purposes has rarely been studied. Objectives: To assess the quality of a questionnaire on sexual and reproductive health (SRH) administered in a nonprobability Web panel and in a random telephone survey (n = 8,992; n = 8,437, age 16-49 years). Especially, we were…

Preselection statistics and Random Forest classification identify population informative single nucleotide polymorphisms in cosmopolitan and autochthonous cattle breeds.

PubMed

Bertolini, F; Galimberti, G; Schiavo, G; Mastrangelo, S; Di Gerlando, R; Strillacci, M G; Bagnato, A; Portolano, B; Fontanesi, L

2018-01-01

Commercial single nucleotide polymorphism (SNP) arrays have been recently developed for several species and can be used to identify informative markers to differentiate breeds or populations for several downstream applications. To identify the most discriminating genetic markers among thousands of genotyped SNPs, a few statistical approaches have been proposed. In this work, we compared several methods of SNPs preselection (Delta, F st and principal component analyses (PCA)) in addition to Random Forest classifications to analyse SNP data from six dairy cattle breeds, including cosmopolitan (Holstein, Brown and Simmental) and autochthonous Italian breeds raised in two different regions and subjected to limited or no breeding programmes (Cinisara, Modicana, raised only in Sicily and Reggiana, raised only in Emilia Romagna). From these classifications, two panels of 96 and 48 SNPs that contain the most discriminant SNPs were created for each preselection method. These panels were evaluated in terms of the ability to discriminate as a whole and breed-by-breed, as well as linkage disequilibrium within each panel. The obtained results showed that for the 48-SNP panel, the error rate increased mainly for autochthonous breeds, probably as a consequence of their admixed origin lower selection pressure and by ascertaining bias in the construction of the SNP chip. The 96-SNP panels were generally more able to discriminate all breeds. The panel derived by PCA-chrom (obtained by a preselection chromosome by chromosome) could identify informative SNPs that were particularly useful for the assignment of minor breeds that reached the lowest value of Out Of Bag error even in the Cinisara, whose value was quite high in all other panels. Moreover, this panel contained also the lowest number of SNPs in linkage disequilibrium. Several selected SNPs are located nearby genes affecting breed-specific phenotypic traits (coat colour and stature) or associated with production traits. In general, our results demonstrated the usefulness of Random Forest in combination to other reduction techniques to identify population informative SNPs.

Clustered mixed nonhomogeneous Poisson process spline models for the analysis of recurrent event panel data.

PubMed

Nielsen, J D; Dean, C B

2008-09-01

A flexible semiparametric model for analyzing longitudinal panel count data arising from mixtures is presented. Panel count data refers here to count data on recurrent events collected as the number of events that have occurred within specific follow-up periods. The model assumes that the counts for each subject are generated by mixtures of nonhomogeneous Poisson processes with smooth intensity functions modeled with penalized splines. Time-dependent covariate effects are also incorporated into the process intensity using splines. Discrete mixtures of these nonhomogeneous Poisson process spline models extract functional information from underlying clusters representing hidden subpopulations. The motivating application is an experiment to test the effectiveness of pheromones in disrupting the mating pattern of the cherry bark tortrix moth. Mature moths arise from hidden, but distinct, subpopulations and monitoring the subpopulation responses was of interest. Within-cluster random effects are used to account for correlation structures and heterogeneity common to this type of data. An estimating equation approach to inference requiring only low moment assumptions is developed and the finite sample properties of the proposed estimating functions are investigated empirically by simulation.

An efficient analytical model for baffled, multi-celled membrane-type acoustic metamaterial panels

NASA Astrophysics Data System (ADS)

Langfeldt, F.; Gleine, W.; von Estorff, O.

2018-03-01

A new analytical model for the oblique incidence sound transmission loss prediction of baffled panels with multiple subwavelength sized membrane-type acoustic metamaterial (MAM) unit cells is proposed. The model employs a novel approach via the concept of the effective surface mass density and approximates the unit cell vibrations in the form of piston-like displacements. This yields a coupled system of linear equations that can be solved efficiently using well-known solution procedures. A comparison with results from finite element model simulations for both normal and diffuse field incidence shows that the analytical model delivers accurate results as long as the edge length of the MAM unit cells is smaller than half the acoustic wavelength. The computation times for the analytical calculations are 100 times smaller than for the numerical simulations. In addition to that, the effect of flexible MAM unit cell edges compared to the fixed edges assumed in the analytical model is studied numerically. It is shown that the compliance of the edges has only a small impact on the transmission loss of the panel, except at very low frequencies in the stiffness-controlled regime. The proposed analytical model is applied to investigate the effect of variations of the membrane prestress, added mass, and mass eccentricity on the diffuse transmission loss of a MAM panel with 120 unit cells. Unlike most previous investigations of MAMs, these results provide a better understanding of the acoustic performance of MAMs under more realistic conditions. For example, it is shown that by varying these parameters deliberately in a checkerboard pattern, a new anti-resonance with large transmission loss values can be introduced. A random variation of these parameters, on the other hand, is shown to have only little influence on the diffuse transmission loss, as long as the standard deviation is not too large. For very large random variations, it is shown that the peak transmission loss value can be greatly diminished.

Computational and experimental studies of microvascular void features for passive-adaptation of structural panel dynamic properties

NASA Astrophysics Data System (ADS)

Sears, Nicholas C.; Harne, Ryan L.

2018-01-01

The performance, integrity, and safety of built-up structural systems are critical to their effective employment in diverse engineering applications. In conflict with these goals, harmonic or random excitations of structural panels may promote large amplitude oscillations that are particularly harmful when excitation energies are concentrated around natural frequencies. This contributes to fatigue concerns, performance degradation, and failure. While studies have considered active or passive damping treatments that adapt material characteristics and configurations for structural control, it remains to be understood how vibration properties of structural panels may be tailored via internal material transitions. Motivated to fill this knowledge gap, this research explores an idea of adapting the static and dynamic material distribution of panels through embedded microvascular channels and strategically placed voids that permit the internal movement of fluids within the panels for structural dynamic control. Finite element model and experimental investigations probe how redistributing material in the form of microscale voids influences the global vibration modes and natural frequencies of structural panels. Through parameter studies, the relationships among void shape, number, size, and location are quantified towards their contribution to the changing structural dynamics. For the panel composition and boundary conditions considered in this report, the findings reveal that transferring material between strategically placed voids may result in eigenfrequency changes as great as 10.0, 5.0, and 7.4% for the first, second, and third modes, respectively.

Why Does Private School Enrollment Grow? Evidence from Argentina

ERIC Educational Resources Information Center

Narodowski, Mariano; Moschetti, Mauro

2015-01-01

During the second half of the twentieth century, a process of privatization took place in the Argentine education system. This paper seeks to explain the growth of private enrollments in Argentina over the last years. Drawing on the concept of quasi-monopoly, we run a random-effects estimation on panel data to analyze the determinants of the…

Childcare Subsidies and the Transition from Welfare to Work

ERIC Educational Resources Information Center

Danziger, Sandra K.; Ananat, Elizabeth Oltmans; Browning, Kimberly G.

2004-01-01

We address how childcare subsidies help in the welfare-to-work transition relative to other factors. We examine how the policy operates, whether childcare problems differ by subsidy receipt, and the effect of subsidy on work. Data are from a random sample panel study of welfare recipients after 1996. Findings show that subsidy receipt reduces…

Development of panel loudspeaker system: design, evaluation and enhancement.

PubMed

Bai, M R; Huang, T

2001-06-01

Panel speakers are investigated in terms of structural vibration and acoustic radiation. A panel speaker primarily consists of a panel and an inertia exciter. Contrary to conventional speakers, flexural resonance is encouraged such that the panel vibrates as randomly as possible. Simulation tools are developed to facilitate system integration of panel speakers. In particular, electro-mechanical analogy, finite element analysis, and fast Fourier transform are employed to predict panel vibration and the acoustic radiation. Design procedures are also summarized. In order to compare the panel speakers with the conventional speakers, experimental investigations were undertaken to evaluate frequency response, directional response, sensitivity, efficiency, and harmonic distortion of both speakers. The results revealed that the panel speakers suffered from a problem of sensitivity and efficiency. To alleviate the problem, a woofer using electronic compensation based on H2 model matching principle is utilized to supplement the bass response. As indicated in the result, significant improvement over the panel speaker alone was achieved by using the combined panel-woofer system.

Effects of Communities That Care on Males' and Females' Drug Use and Delinquency 9 Years After Baseline in a Community-Randomized Trial.

PubMed

Oesterle, Sabrina; Hawkins, J David; Kuklinski, Margaret R; Fagan, Abigail A; Fleming, Christopher; Rhew, Isaac C; Brown, Eric C; Abbott, Robert D; Catalano, Richard F

2015-12-01

This study tested sustained effects of the Communities That Care (CTC) prevention system on health-risking behaviors 9 years after baseline in a community-randomized trial involving 24 towns in seven states. Earlier analyses found sustained effects on abstinence from drug use and delinquency through Grade 12 in a panel of fifth graders. At age 19, 91 % (n = 3986) of the living panel completed the survey. Data were analyzed using generalized linear mixed models. The prevalence of lifetime and current substance use and delinquency were the primary outcomes. Secondary outcomes included substance use disorders, major depression, suicidality, educational attainment, and sexual risk behaviors. CTC had a significant overall effect across lifetime measures of the primary outcomes for males, but not for females or the full sample, although lifetime abstinence from delinquency in the full sample was significantly higher in CTC communities (ARR = 1.16). Males in CTC communities also continued to show greater lifetime abstinence from cigarette smoking (ARR = 1.22). CTC did not have a sustained effect on current substance use and delinquency nor did it improve the secondary outcomes at age 19 for either gender. Communities using CTC may need to extend their prevention planning to include the high school years to sustain effects on drug use and delinquency beyond high school for both genders. ClinicalTrials.gov identifier: NCT01088542.

Effects of Communities That Care on Males’ and Females’ Drug Use and Delinquency 9 Years After Baseline in a Community-Randomized Trial

PubMed Central

Hawkins, J. David; Kuklinski, Margaret R.; Fagan, Abigail A.; Fleming, Christopher; Rhew, Isaac C.; Brown, Eric C.; Abbott, Robert D.; Catalano, Richard F.

2016-01-01

This study tested sustained effects of the Communities That Care (CTC) prevention system on health-risking behaviors 9 years after baseline in a community-randomized trial involving 24 towns in seven states. Earlier analyses found sustained effects on abstinence from drug use and delinquency through Grade 12 in a panel of fifth graders. At age 19, 91 % (n = 3986) of the living panel completed the survey. Data were analyzed using generalized linear mixed models. The prevalence of lifetime and current substance use and delinquency were the primary outcomes. Secondary outcomes included substance use disorders, major depression, suicidality, educational attainment, and sexual risk behaviors. CTC had a significant overall effect across lifetime measures of the primary outcomes for males, but not for females or the full sample, although lifetime abstinence from delinquency in the full sample was significantly higher in CTC communities (ARR = 1.16). Males in CTC communities also continued to show greater lifetime abstinence from cigarette smoking (ARR = 1.22). CTC did not have a sustained effect on current substance use and delinquency nor did it improve the secondary outcomes at age 19 for either gender. Communities using CTC may need to extend their prevention planning to include the high school years to sustain effects on drug use and delinquency beyond high school for both genders. PMID:26377418

Cooperation without Culture? The Null Effect of Generalized Trust on Intentional Homicide: A Cross-National Panel Analysis, 1995–2009

PubMed Central

Robbins, Blaine

2013-01-01

Sociologists, political scientists, and economists all suggest that culture plays a pivotal role in the development of large-scale cooperation. In this study, I used generalized trust as a measure of culture to explore if and how culture impacts intentional homicide, my operationalization of cooperation. I compiled multiple cross-national data sets and used pooled time-series linear regression, single-equation instrumental-variables linear regression, and fixed- and random-effects estimation techniques on an unbalanced panel of 118 countries and 232 observations spread over a 15-year time period. Results suggest that culture and large-scale cooperation form a tenuous relationship, while economic factors such as development, inequality, and geopolitics appear to drive large-scale cooperation. PMID:23527211

Ascertainment bias from imputation methods evaluation in wheat.

PubMed

Brandariz, Sofía P; González Reymúndez, Agustín; Lado, Bettina; Malosetti, Marcos; Garcia, Antonio Augusto Franco; Quincke, Martín; von Zitzewitz, Jarislav; Castro, Marina; Matus, Iván; Del Pozo, Alejandro; Castro, Ariel J; Gutiérrez, Lucía

2016-10-04

Whole-genome genotyping techniques like Genotyping-by-sequencing (GBS) are being used for genetic studies such as Genome-Wide Association (GWAS) and Genomewide Selection (GS), where different strategies for imputation have been developed. Nevertheless, imputation error may lead to poor performance (i.e. smaller power or higher false positive rate) when complete data is not required as it is for GWAS, and each marker is taken at a time. The aim of this study was to compare the performance of GWAS analysis for Quantitative Trait Loci (QTL) of major and minor effect using different imputation methods when no reference panel is available in a wheat GBS panel. In this study, we compared the power and false positive rate of dissecting quantitative traits for imputed and not-imputed marker score matrices in: (1) a complete molecular marker barley panel array, and (2) a GBS wheat panel with missing data. We found that there is an ascertainment bias in imputation method comparisons. Simulating over a complete matrix and creating missing data at random proved that imputation methods have a poorer performance. Furthermore, we found that when QTL were simulated with imputed data, the imputation methods performed better than the not-imputed ones. On the other hand, when QTL were simulated with not-imputed data, the not-imputed method and one of the imputation methods performed better for dissecting quantitative traits. Moreover, larger differences between imputation methods were detected for QTL of major effect than QTL of minor effect. We also compared the different marker score matrices for GWAS analysis in a real wheat phenotype dataset, and we found minimal differences indicating that imputation did not improve the GWAS performance when a reference panel was not available. Poorer performance was found in GWAS analysis when an imputed marker score matrix was used, no reference panel is available, in a wheat GBS panel.

Effects of tree species and wood particle size on the properties of cement-bonded particleboard manufacturing from tree prunings.

PubMed

Nasser, Ramadan A; Al-Mefarrej, H A; Abdel-Aal, M A; Alshahrani, T S

2014-09-01

This study investigated the possibility of using the prunings of six locally grown tree species in Saudi Arabia for cement-bonded particleboard (CBP) production. Panels were made using four different wood particle sizes and a constant wood/cement ratio (1/3 by weight) and target density (1200 kg/m3). The mechanical properties and dimensional stability of the produced panels were determined. The interfacial area and distribution of the wood particles in cement matrix were also investigated by scanning electron microscopy. The results revealed that the panels produced from these pruning materials at a target density of 1200 kg m(-3) meet the strength and dimensional stability requirements of the commercial CBP panels. The mean moduli of rupture and elasticity (MOR and MOE) ranged from 9.68 to 11.78 N mm2 and from 3952 to 5667 N mm2, respectively. The mean percent water absorption for twenty four hours (WA24) ranged from 12.93% to 23.39%. Thickness swelling values ranged from 0.62% to 1.53%. For CBP panels with high mechanical properties and good dimensional stability, mixed-size or coarse particles should be used. Using the tree prunings for CBPs production may help to solve the problem of getting rid of these residues by reducing their negative effects on environment, which are caused by poor disposal of such materials through direct combustion process and appearance of black cloud and then the impact on human health or the random accumulation and its indirect effects on the environment.

Professional Opinion Concerning the Effectiveness of Bracing Relative to Observation in Adolescent Idiopathic Scoliosis

PubMed Central

Dolan, Lori A.; Donnelly, Melanie J.; Spratt, Kevin F.; Weinstein, Stuart L.

2015-01-01

Objective To determine if community equipoise exists concerning the effectiveness of bracing in adolescent idiopathic scoliosis. Background Data Bracing is the standard of care for adolescent idiopathic scoliosis despite the lack of strong reasearch evidence concerning its effectiveness. Thus, some researchers support the idea of a randomized trial, whereas others think that randomization in the face of a standard of care would be unethical. Methods A random of Scoliosis Research Society and Pediatric Orthopaedic Society of North America members were asked to consider 12 clinical profiles and to give their opinion concerning the radiographic outcomes after observation and bracing. Results An expert panel was created from the respondents. They expressed a wide array of opinions concerning the percentage of patients within each scenario who would benefit from bracing. Agreement was noted concerning the risk due to bracing for post-menarchal patients only. Conclusions This study found a high degree of variability in opinion among clinicians concerning the effectiveness of bracing, suggesting that a randomized trial of bracing would be ethical. PMID:17414008

The Effect of Data Format on Integration of Performance Data into Angoff Judgments

ERIC Educational Resources Information Center

Clauser, Brian E.; Mee, Janet; Margolis, Melissa J.

2013-01-01

This study investigated the extent to which the performance data format impacted data use in Angoff standard setting exercises. Judges from two standard settings (a total of five panels) were randomly assigned to one of two groups. The full-data group received two types of data: (1) the proportion of examinees selecting each option and (2) plots…

Dental responsibility loadings and the relative value of dental services.

PubMed

Teusner, D N; Ju, X; Brennan, D S

2017-09-01

To estimate responsibility loadings for a comprehensive list of dental services, providing a standardized unit of clinical work effort. Dentists (n = 2500) randomly sampled from the Australian Dental Association membership (2011) were randomly assigned to one of 25 panels. Panels were surveyed by questionnaires eliciting responsibility loadings for eight common dental services (core items) and approximately 12 other items unique to that questionnaire. In total, loadings were elicited for 299 items listed in the Australian Dental Schedule 9th Edition. Data were weighted to reflect the age and sex distribution of the workforce. To assess reliability, regression models assessed differences in core item loadings by panel assignment. Estimated loadings were described by reporting the median and mean. Response rate was 37%. Panel composition did not vary by practitioner characteristics. Core item loadings did not vary by panel assignment. Oral surgery and endodontic service areas had the highest proportion (91%) of services with median loadings ≥1.5, followed by prosthodontics (78%), periodontics (76%), orthodontics (63%), restorative (62%) and diagnostic services (31%). Preventive services had median loadings ≤1.25. Dental responsibility loadings estimated by this study can be applied in the development of relative value scales. © 2017 Australian Dental Association.

Measuring the impact of energy consumption and air quality indicators on climate change: evidence from the panel of UNFCC classified countries.

PubMed

Ozturk, Ilhan

2015-10-01

This study examines the relationship between energy consumption, air pollution, and climate change in the panel of six economically diversified countries classified by the United Nations Framework Convention on Climate Change (UNFCC) as industrialized countries and economies in transition nations by using the panel econometric techniques for the period of 1990-2012. The results of pooled least square regression show that both the energy consumption and air quality indicators have a positive and significant relationship with the climate change, i.e., 1 % increase in energy consumption increases greenhouse gas emissions by 0.124 %, carbon dioxide emissions increase by 0.652 %, methane emissions increase by 0.123 %, and nitrous oxide emissions increase greenhouse gas emissions by 0.105 % age points. The results of fixed-effect regression and random-effect regression confirmed the deteriorating impact of air quality indicators on climate change; however, the results failed to show any significant association between energy consumption and climate change when absorbing country-specific shocks and time-variant shocks during the study time period.

Monte Carlo ray-tracing simulations of luminescent solar concentrators for building integrated photovoltaics

NASA Astrophysics Data System (ADS)

Leow, Shin Woei; Corrado, Carley; Osborn, Melissa; Carter, Sue A.

2013-09-01

Luminescent solar concentrators (LSCs) have the ability to receive light from a wide range of angles, concentrating the captured light onto small photo active areas. This enables greater incorporation of LSCs into building designs as windows, skylights and wall claddings in addition to rooftop installations of current solar panels. Using relatively cheap luminescent dyes and acrylic waveguides to effect light concentration onto lesser photovoltaic (PV) cells, there is potential for this technology to approach grid price parity. We employ a panel design in which the front facing PV cells collect both direct and concentrated light ensuring a gain factor greater than one. This also allows for flexibility in determining the placement and percentage coverage of PV cells during the design process to balance reabsorption losses against the power output and level of light concentration desired. To aid in design optimization, a Monte-Carlo ray tracing program was developed to study the transport of photons and loss mechanisms in LSC panels. The program imports measured absorption/emission spectra and transmission coefficients as simulation parameters with interactions of photons in the panel determined by comparing calculated probabilities with random number generators. LSC panels with multiple dyes or layers can also be simulated. Analysis of the results reveals optimal panel dimensions and PV cell layouts for maximum power output for a given dye concentration, absorbtion/emission spectrum and quantum efficiency.

Mathematical Creativity and Mathematical Aptitude: A Cross-Lagged Panel Analysis

ERIC Educational Resources Information Center

Tyagi, Tarun Kumar

2016-01-01

Cross-lagged panel correlation (CLPC) analysis has been used to identify causal relationships between mathematical creativity and mathematical aptitude. For this study, 480 8th standard students were selected through a random cluster technique from 9 intermediate and high schools of Varanasi, India. Mathematical creativity and mathematical…

Binaural Simulation Experiments in the NASA Langley Structural Acoustics Loads and Transmission Facility

NASA Technical Reports Server (NTRS)

Grosveld, Ferdinand W.; Silcox, Richard (Technical Monitor)

2001-01-01

A location and positioning system was developed and implemented in the anechoic chamber of the Structural Acoustics Loads and Transmission (SALT) facility to accurately determine the coordinates of points in three-dimensional space. Transfer functions were measured between a shaker source at two different panel locations and the vibrational response distributed over the panel surface using a scanning laser vibrometer. The binaural simulation test matrix included test runs for several locations of the measuring microphones, various attitudes of the mannequin, two locations of the shaker excitation and three different shaker inputs including pulse, broadband random, and pseudo-random. Transfer functions, auto spectra, and coherence functions were acquired for the pseudo-random excitation. Time histories were acquired for the pulse and broadband random input to the shaker. The tests were repeated with a reflective surface installed. Binary data files were converted to universal format and archived on compact disk.

The Role of Education Pathways in the Relationship between Job Mismatch, Wages and Job Satisfaction: A Panel Estimation Approach

ERIC Educational Resources Information Center

Mavromaras, Kostas; Sloane, Peter; Wei, Zhang

2012-01-01

This paper examines the outcome of over-skilling and over-education on wages and job satisfaction of full-time employees in Australia between 2001 and 2008. We employ a random effects probit model with Mundlak corrections. We find differences by type of mismatch, education pathway, and gender. We categorise reported mismatches as genuine…

Effectiveness of a Time-Limited Incentive on Participation by Hard-to-Reach Respondents in a Panel Study

ERIC Educational Resources Information Center

Fomby, Paula; Sastry, Narayan; McGonagle, Katherine A.

2017-01-01

We describe an experiment to provide a time-limited incentive among a random sample of 594 hard-to-reach respondents, 200 of whom were offered the incentive to complete all survey components of a study during a three-week winter holiday period. Sample members were primary caregivers of children included in the 2014 Child Development Supplement to…

Prospecting sugarcane resistance to Sugarcane yellow leaf virus by genome-wide association.

PubMed

Debibakas, S; Rocher, S; Garsmeur, O; Toubi, L; Roques, D; D'Hont, A; Hoarau, J-Y; Daugrois, J H

2014-08-01

Using GWAS approaches, we detected independent resistant markers in sugarcane towards a vectored virus disease. Based on comparative genomics, several candidate genes potentially involved in virus/aphid/plant interactions were pinpointed. Yellow leaf of sugarcane is an emerging viral disease whose causal agent is a Polerovirus, the Sugarcane yellow leaf virus (SCYLV) transmitted by aphids. To identify quantitative trait loci controlling resistance to yellow leaf which are of direct relevance for breeding, we undertook a genome-wide association study (GWAS) on a sugarcane cultivar panel (n = 189) representative of current breeding germplasm. This panel was fingerprinted with 3,949 polymorphic markers (DArT and AFLP). The panel was phenotyped for SCYLV infection in leaves and stalks in two trials for two crop cycles, under natural disease pressure prevalent in Guadeloupe. Mixed linear models including co-factors representing population structure fixed effects and pairwise kinship random effects provided an efficient control of the risk of inflated type-I error at a genome-wide level. Six independent markers were significantly detected in association with SCYLV resistance phenotype. These markers explained individually between 9 and 14 % of the disease variation of the cultivar panel. Their frequency in the panel was relatively low (8-20 %). Among them, two markers were detected repeatedly across the GWAS exercises based on the different disease resistance parameters. These two markers could be blasted on Sorghum bicolor genome and candidate genes potentially involved in plant-aphid or plant-virus interactions were localized in the vicinity of sorghum homologs of sugarcane markers. Our results illustrate the potential of GWAS approaches to prospect among sugarcane germplasm for accessions likely bearing resistance alleles of significant effect useful in breeding programs.

Self-rated health, generalized trust, and the Affordable Care Act: A US panel study, 2006-2014.

PubMed

Mewes, Jan; Giordano, Giuseppe Nicola

2017-10-01

Previous research shows that generalized trust, the belief that most people can be trusted, is conducive to people's health. However, only recently have longitudinal studies suggested an additional reciprocal pathway from health back to trust. Drawing on a diverse body of literature that shows how egalitarian social policy contributes to the promotion of generalized trust, we hypothesize that this other 'reverse' pathway could be sensitive to health insurance context. Drawing on nationally representative US panel data from the General Social Survey, we examine whether the Affordable Care Act of 2010 could have had influence on the deteriorating impact of worsening self-rated health (SRH) on generalized trust. Firstly, using two-wave panel data (2008-2010, N = 1403) and employing random effects regression models, we show that a lack of health insurance coverage negatively determines generalized trust in the United States. However, this association is attenuated when additionally controlling for (perceived) income inequality. Secondly, utilizing data from two separate three-wave panel studies from the US General Social Survey (2006-10; N = 1652; 2010-2014; N = 1187), we employ fixed-effects linear regression analyses to control for unobserved heterogeneity from time-invariant factors. We demonstrate that worsening SRH was a stronger predictor for a decrease in generalized trust prior (2006-2010) to the implementation of the Affordable Care Act. Further, the negative effect of fair/poor SRH seen in the 2006-2010 data becomes attenuated in the 2010-2014 panel data. We thus find evidence for a substantial weakening of the previously established negative impact of decreasing SRH on generalized trust, coinciding with the most significant US healthcare reforms in decades. Social policy and healthcare policy implications are discussed. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

An evaluation of random analysis methods for the determination of panel damping

NASA Technical Reports Server (NTRS)

Bhat, W. V.; Wilby, J. F.

1972-01-01

An analysis is made of steady-state and non-steady-state methods for the measurement of panel damping. Particular emphasis is placed on the use of random process techniques in conjunction with digital data reduction methods. The steady-state methods considered use the response power spectral density, response autocorrelation, excitation-response crosspower spectral density, or single-sided Fourier transform (SSFT) of the response autocorrelation function. Non-steady-state methods are associated mainly with the use of rapid frequency sweep excitation. Problems associated with the practical application of each method are evaluated with specific reference to the case of a panel exposed to a turbulent airflow, and two methods, the power spectral density and the single-sided Fourier transform methods, are selected as being the most suitable. These two methods are demonstrated experimentally, and it is shown that the power spectral density method is satisfactory under most conditions, provided that appropriate corrections are applied to account for filter bandwidth and background noise errors. Thus, the response power spectral density method is recommended for the measurement of the damping of panels exposed to a moving airflow.

Analysis of random structure-acoustic interaction problems using coupled boundary element and finite element methods

NASA Technical Reports Server (NTRS)

Mei, Chuh; Pates, Carl S., III

1994-01-01

A coupled boundary element (BEM)-finite element (FEM) approach is presented to accurately model structure-acoustic interaction systems. The boundary element method is first applied to interior, two and three-dimensional acoustic domains with complex geometry configurations. Boundary element results are very accurate when compared with limited exact solutions. Structure-interaction problems are then analyzed with the coupled FEM-BEM method, where the finite element method models the structure and the boundary element method models the interior acoustic domain. The coupled analysis is compared with exact and experimental results for a simplistic model. Composite panels are analyzed and compared with isotropic results. The coupled method is then extended for random excitation. Random excitation results are compared with uncoupled results for isotropic and composite panels.

The Effect of Widowhood on Mental Health - an Analysis of Anticipation Patterns Surrounding the Death of a Spouse.

PubMed

Siflinger, Bettina

2017-12-01

This study explores the effects of widowhood on mental health by taking into account the anticipation and adaptation to the partner's death. The empirical analysis uses representative panel data from the USA that are linked to administrative death records of the National Death Index. I estimate static and dynamic specifications of the panel probit model in which unobserved heterogeneity is modeled with correlated random effects. I find strong anticipation effects of the partner's death on the probability of depression, implying that the partner's death event cannot be assumed to be exogenous in econometric models. In the absence of any anticipation effects, the partner's death has long-lasting mental health consequences, leading to a significantly slower adaptation to widowhood. The results suggest that both anticipation effects and adaptation effects can be attributed to a caregiver burden and to the cause of death. The findings of this study have important implications for designing adequate social policies for the elderly US population that alleviate the negative consequences of bereavement. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Ottawa Panel evidence-based clinical practice guidelines for therapeutic exercise in the management of hip osteoarthritis.

PubMed

Brosseau, Lucie; Wells, George A; Pugh, Arlanna G; Smith, Christine Am; Rahman, Prinon; Àlvarez Gallardo, Inmaculada C; Toupin-April, Karine; Loew, Laurianne; De Angelis, Gino; Cavallo, Sabrina; Taki, Jade; Marcotte, Rachel; Fransen, Marlene; Hernandez-Molina, Gabriela; Kenny, Glen P; Regnaux, Jean-Philippe; Lefevre-Colau, Marie-Martine; Brooks, Sydney; Laferriere, Lucie; McLean, Linda; Longchamp, Guy

2016-10-01

The primary objective is to identify effective land-based therapeutic exercise interventions and provide evidence-based recommendations for managing hip osteoarthritis. A secondary objective is to develop an Ottawa Panel evidence-based clinical practice guideline for hip osteoarthritis. The search strategy and modified selection criteria from a Cochrane review were used. Studies included hip osteoarthritis patients in comparative controlled trials with therapeutic exercise interventions. An Expert Panel arrived at a Delphi survey consensus to endorse the recommendations. The Ottawa Panel hierarchical alphabetical grading system (A, B, C+, C, D, D+, or D-) considered the study design (level I: randomized controlled trial and level II: controlled clinical trial), statistical significance (p < 0.5), and clinical importance (⩾15% improvement). Four high-quality studies were included, which demonstrated that variations of strength training, stretching, and flexibility exercises are generally effective for improving the management of hip osteoarthritis. Strength training exercises displayed the greatest improvements for pain (Grade A), disability (Grades A and C+), physical function (Grade A), stiffness (Grade A), and range of motion (Grade A) within a short time period (8-24 weeks). Stretching also greatly improved physical function (Grade A), and flexibility exercises improved pain (Grade A), range of motion (Grade A), physical function (Grade A), and stiffness (Grade C+). The Ottawa Panel recommends land-based therapeutic exercise, notably strength training, for management of hip osteoarthritis in reducing pain, stiffness and self-reported disability, and improving physical function and range of motion. © The Author(s) 2015.

The Effects of Respondents’ Consent to be Recorded on Interview Length and Data Quality in a National Panel Study

PubMed Central

McGonagle, Katherine A.; Brown, Charles; Schoeni, Robert F.

2014-01-01

Recording interviews is a key feature of quality control protocols for most survey organizations. We examine the effects on interview length and data quality of a new protocol adopted by a national panel study. The protocol recorded a randomly chosen one-third of all interviews digitally, although all respondents were asked for permission to record their interview, and interviewers were blind to whether or not interviews were recorded. We find that the recording software slowed the interview slightly. Interviewer knowledge that the interview may be recorded improved data quality, but this knowledge also increased the length of the interview. Interviewers with higher education and performance ratings were less reactive to the new recording protocol. Survey managers may face a trade-off between higher data quality and longer interviews when determining recording protocols. PMID:26550000

A brief randomized controlled intervention targeting parents improves grades during middle school.

PubMed

Destin, Mesmin; Svoboda, Ryan C

2017-04-01

Despite a growing number of brief, psychosocial interventions that improve academic achievement, little research investigates how to leverage parents during such efforts. We designed and tested a randomized controlled intervention targeting parents to influence important discussions about the future and responses to academic difficulty experienced by their adolescent during eighth grade in the United States. We recruited experienced parents to convey the main messages of the intervention in a parent panel format. As expected, current parents who were randomly assigned to observe the parent panel subsequently planned to talk with their adolescents sooner about future opportunities and to respond more positively to experiences of academic difficulty than parents who were randomly assigned to a control group. The intervention also led to a significant increase in student grades, which was mediated by parents' responses to academic difficulty. We suggest an increase in experimental research that utilizes parents to influence student achievement. Copyright © 2017 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

Creep behavior of flakeboards made with a mixture of southern species

Treesearch

Eddie W. Price

1985-01-01

Deftection of oriented flakeboards, random flakeboards, and southern pine plywood was evaluated for small size bending specimens and concentrated loads applied to panels nailed on framing lumber. The flakeboards contained a mixture of southern hardwoods and pine; the plywood was 3-ply l/2-inch and 4-ply 5/8-inch construction. Tests of both panel directions, all load...

An Approach to the Analysis of Panel Data: The Watergate Hearings and Political Socialization.

ERIC Educational Resources Information Center

Davis, Dennis K.; Lee, Jae-won

It was the purpose of this study to provide a tool for designing and executing future research on panel data in which relationships between pairs of variables are observed over time so that contingent conditions can be controlled. The 360 subjects were selected from the telephone directory and surveyed at random about their responses to the…

A reliability-based cost effective fail-safe design procedure

NASA Technical Reports Server (NTRS)

Hanagud, S.; Uppaluri, B.

1976-01-01

The authors have developed a methodology for cost-effective fatigue design of structures subject to random fatigue loading. A stochastic model for fatigue crack propagation under random loading has been discussed. Fracture mechanics is then used to estimate the parameters of the model and the residual strength of structures with cracks. The stochastic model and residual strength variations have been used to develop procedures for estimating the probability of failure and its changes with inspection frequency. This information on reliability is then used to construct an objective function in terms of either a total weight function or cost function. A procedure for selecting the design variables, subject to constraints, by optimizing the objective function has been illustrated by examples. In particular, optimum design of stiffened panel has been discussed.

Expert Opinion Is Necessary: Delphi Panel Methodology Facilitates a Scientific Approach to Consensus.

PubMed

Hohmann, Erik; Brand, Jefferson C; Rossi, Michael J; Lubowitz, James H

2018-02-01

Our current trend and focus on evidence-based medicine is biased in favor of randomized controlled trials, which are ranked highest in the hierarchy of evidence while devaluing expert opinion, which is ranked lowest in the hierarchy. However, randomized controlled trials have weaknesses as well as strengths, and no research method is flawless. Moreover, stringent application of scientific research techniques, such as the Delphi Panel methodology, allows survey of experts in a high quality and scientific manner. Level V evidence (expert opinion) remains a necessary component in the armamentarium used to determine the answer to a clinical question. Copyright © 2017 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Characteristics of Clinical Studies Used for US Food and Drug Administration Approval of High-Risk Medical Device Supplements.

PubMed

Zheng, Sarah Y; Dhruva, Sanket S; Redberg, Rita F

2017-08-15

High-risk medical devices often undergo modifications, which are approved by the US Food and Drug Administration (FDA) through various kinds of premarket approval (PMA) supplements. There have been multiple high-profile recalls of devices approved as PMA supplements. To characterize the quality of the clinical studies and data (strength of evidence) used to support FDA approval of panel-track supplements (a type of PMA supplement pathway that is used for significant changes in a device or indication for use and always requires clinical data). Descriptive study of clinical studies supporting panel-track supplements approved by the FDA between April 19, 2006, and October 9, 2015. Panel-track supplement approval. Methodological quality of studies including randomization, blinding, type of controls, clinical vs surrogate primary end points, use of post hoc analyses, and reporting of age and sex. Eighty-three clinical studies supported the approval of 78 panel-track supplements, with 71 panel-track supplements (91%) supported by a single study. Of the 83 studies, 37 (45%) were randomized clinical trials and 25 (30%) were blinded. The median number of patients per study was 185 (interquartile range, 75-305), and the median follow-up duration was 180 days (interquartile range, 84-270 days). There were a total of 150 primary end points (mean [SD], 1.8 [1.2] per study), and 57 primary end points (38%) were compared with controls. Of primary end points with controls, 6 (11%) were retrospective controls and 51 (89%) were active controls. One hundred twenty-one primary end points (81%) were surrogate end points. Thirty-three studies (40%) did not report age and 25 (30%) did not report sex for all enrolled patients. The FDA required postapproval studies for 29 of 78 (37%) panel-track supplements. Among clinical studies used to support FDA approval of high-risk medical device modifications, fewer than half were randomized, blinded, or controlled, and most primary outcomes were based on surrogate end points. These findings suggest that the quality of studies and data evaluated to support approval by the FDA of modifications of high-risk devices should be improved.

Identification of an Efficient Gene Expression Panel for Glioblastoma Classification

PubMed Central

Zelaya, Ivette; Laks, Dan R.; Zhao, Yining; Kawaguchi, Riki; Gao, Fuying; Kornblum, Harley I.; Coppola, Giovanni

2016-01-01

We present here a novel genetic algorithm-based random forest (GARF) modeling technique that enables a reduction in the complexity of large gene disease signatures to highly accurate, greatly simplified gene panels. When applied to 803 glioblastoma multiforme samples, this method allowed the 840-gene Verhaak et al. gene panel (the standard in the field) to be reduced to a 48-gene classifier, while retaining 90.91% classification accuracy, and outperforming the best available alternative methods. Additionally, using this approach we produced a 32-gene panel which allows for better consistency between RNA-seq and microarray-based classifications, improving cross-platform classification retention from 69.67% to 86.07%. A webpage producing these classifications is available at http://simplegbm.semel.ucla.edu. PMID:27855170

Calculated and measured stresses in simple panels subject to intense random acoustic loading including the near noise field of a turbojet engine

NASA Technical Reports Server (NTRS)

Lassiter, Leslie W; Hess, Robert W

1958-01-01

Flat 2024-t3 aluminum panels measuring 11 inches by 13 inches were tested in the near noise fields of a 4-inch air jet and turbojet engine. The stresses which were developed in the panels are compared with those calculated by generalized harmonic analysis. The calculated and measured stresses were found to be in good agreement. In order to make the stress calculations, supplementary data relating to the transfer characteristics, damping, and static response of flat and curved panels under periodic loading are necessary and were determined experimentally. In addition, an appendix containing detailed data on the near pressure field of the turbojet engine is included.

Prediction of transmission loss through an aircraft sidewall using statistical energy analysis

NASA Astrophysics Data System (ADS)

Ming, Ruisen; Sun, Jincai

1989-06-01

The transmission loss of randomly incident sound through an aircraft sidewall is investigated using statistical energy analysis. Formulas are also obtained for the simple calculation of sound transmission loss through single- and double-leaf panels. Both resonant and nonresonant sound transmissions can be easily calculated using the formulas. The formulas are used to predict sound transmission losses through a Y-7 propeller airplane panel. The panel measures 2.56 m x 1.38 m and has two windows. The agreement between predicted and measured values through most of the frequency ranges tested is quite good.

Limit Theory for Panel Data Models with Cross Sectional Dependence and Sequential Exogeneity.

PubMed

Kuersteiner, Guido M; Prucha, Ingmar R

2013-06-01

The paper derives a general Central Limit Theorem (CLT) and asymptotic distributions for sample moments related to panel data models with large n . The results allow for the data to be cross sectionally dependent, while at the same time allowing the regressors to be only sequentially rather than strictly exogenous. The setup is sufficiently general to accommodate situations where cross sectional dependence stems from spatial interactions and/or from the presence of common factors. The latter leads to the need for random norming. The limit theorem for sample moments is derived by showing that the moment conditions can be recast such that a martingale difference array central limit theorem can be applied. We prove such a central limit theorem by first extending results for stable convergence in Hall and Hedye (1980) to non-nested martingale arrays relevant for our applications. We illustrate our result by establishing a generalized estimation theory for GMM estimators of a fixed effect panel model without imposing i.i.d. or strict exogeneity conditions. We also discuss a class of Maximum Likelihood (ML) estimators that can be analyzed using our CLT.

Prediction of sound transmission loss through multilayered panels by using Gaussian distribution of directional incident energy

PubMed

Kang; Ih; Kim; Kim

2000-03-01

In this study, a new prediction method is suggested for sound transmission loss (STL) of multilayered panels of infinite extent. Conventional methods such as random or field incidence approach often given significant discrepancies in predicting STL of multilayered panels when compared with the experiments. In this paper, appropriate directional distributions of incident energy to predict the STL of multilayered panels are proposed. In order to find a weighting function to represent the directional distribution of incident energy on the wall in a reverberation chamber, numerical simulations by using a ray-tracing technique are carried out. Simulation results reveal that the directional distribution can be approximately expressed by the Gaussian distribution function in terms of the angle of incidence. The Gaussian function is applied to predict the STL of various multilayered panel configurations as well as single panels. The compared results between the measurement and the prediction show good agreements, which validate the proposed Gaussian function approach.

Crash Frequency Modeling Using Real-Time Environmental and Traffic Data and Unbalanced Panel Data Models

PubMed Central

Chen, Feng; Chen, Suren; Ma, Xiaoxiang

2016-01-01

Traffic and environmental conditions (e.g., weather conditions), which frequently change with time, have a significant impact on crash occurrence. Traditional crash frequency models with large temporal scales and aggregated variables are not sufficient to capture the time-varying nature of driving environmental factors, causing significant loss of critical information on crash frequency modeling. This paper aims at developing crash frequency models with refined temporal scales for complex driving environments, with such an effort providing more detailed and accurate crash risk information which can allow for more effective and proactive traffic management and law enforcement intervention. Zero-inflated, negative binomial (ZINB) models with site-specific random effects are developed with unbalanced panel data to analyze hourly crash frequency on highway segments. The real-time driving environment information, including traffic, weather and road surface condition data, sourced primarily from the Road Weather Information System, is incorporated into the models along with site-specific road characteristics. The estimation results of unbalanced panel data ZINB models suggest there are a number of factors influencing crash frequency, including time-varying factors (e.g., visibility and hourly traffic volume) and site-varying factors (e.g., speed limit). The study confirms the unique significance of the real-time weather, road surface condition and traffic data to crash frequency modeling. PMID:27322306

The effect of cigarette price increases on cigarette consumption, tax revenue, and smoking-related death in Africa from 1999 to 2013.

PubMed

Ho, Li-Ming; Schafferer, Christian; Lee, Jie-Min; Yeh, Chun-Yuan; Hsieh, Chi-Jung

2017-11-01

This study investigates the effects of price hikes on cigarette consumption, tobacco tax revenues, and reduction in smoking-caused mortality in 36 African countries. Using panel data from the 1999-2013 Euromonitor International, the World Bank and the World Health Organization, we applied fixed-effects and random-effects regression models of panel data to estimate the elasticity of cigarette prices and simulate the effect of price fluctuations. Cigarette price elasticity was the highest for low-income countries and considerably lower for other African economies. The administered simulation shows that with an average annual cigarette price increase of 7.38%, the average annual cigarette consumption would decrease by 3.84%, and the average annual tobacco tax revenue would increase by 19.39%. By 2050, the number of averted smoking-attributable deaths (SADs) will be the highest in South Africa, followed by the Democratic Republic of Congo, Madagascar, and Ethiopia. Excise tax increases have a significant effect on the reduction of smoking prevalence and the number of averted smoking-attributable deaths, Low-income countries are most affected by high taxation policies.

A Panel Data Analysis of the Relationships of Nursing Home Staffing Levels and Standards to Regulatory Deficiencies

PubMed Central

Kovner, Christine; Harrington, Charlene; Greene, William; Mezey, Mathy

2009-01-01

Objective To examine the relationships between nursing staffing levels and nursing home deficiencies. Methods This panel data analysis employed random-effect models that adjusted for unobserved, nursing home–specific heterogeneity over time. Data were obtained from California's long-term care annual cost report data and the Automated Certification and Licensing Administrative Information and Management Systems data from 1999 to 2003, linked with other secondary data sources. Results Both total nursing staffing and registered nurse (RN) staffing levels were negatively related to total deficiencies, quality of care deficiencies, and serious deficiencies that may cause harm or jeopardy to nursing home residents. Nursing homes that met the state staffing standard received fewer total deficiencies and quality of care deficiencies than nursing homes that failed to meet the standard. Meeting the state staffing standard was not related to receiving serious deficiencies. Conclusions Total nursing staffing and RN staffing levels were predictors of nursing home quality. Further research is needed on the effectiveness of state minimum staffing standards. PMID:19181692

INDEPENDENT EVALUATION OF THE GAM EX5ALN MINIATURE LINE-NARROWED KRF EXCIMER LASER

DTIC Science & Technology

2017-06-01

software included the disabled tabs and buttons that clutter the panels. Information on these panels was not updated correctly (e.g., shots per fill and...total shots are not stored correctly and appear to contain random data, the lock function on the fill page does not update correctly, the time to...fill level after 7 M shots . .............................................................................. Error! Bookmark not defined. 7: Shelf-life

The effect of multi-directional nanocomposite materials on the vibrational response of thick shell panels with finite length and rested on two-parameter elastic foundations

NASA Astrophysics Data System (ADS)

Tahouneh, Vahid; Naei, Mohammad Hasan

2016-03-01

The main purpose of this paper is to investigate the effect of bidirectional continuously graded nanocomposite materials on free vibration of thick shell panels rested on elastic foundations. The elastic foundation is considered as a Pasternak model after adding a shear layer to the Winkler model. The panels reinforced by randomly oriented straight single-walled carbon nanotubes are considered. The volume fractions of SWCNTs are assumed to be graded not only in the radial direction, but also in axial direction of the curved panel. This study presents a 2-D six-parameter power-law distribution for CNTs volume fraction of 2-D continuously graded nanocomposite that gives designers a powerful tool for flexible designing of structures under multi-functional requirements. The benefit of using generalized power-law distribution is to illustrate and present useful results arising from symmetric, asymmetric and classic profiles. The material properties are determined in terms of local volume fractions and material properties by Mori-Tanaka scheme. The 2-D differential quadrature method as an efficient numerical tool is used to discretize governing equations and to implement boundary conditions. The fast rate of convergence of the method is shown and results are compared against existing results in literature. Some new results for natural frequencies of the shell are prepared, which include the effects of elastic coefficients of foundation, boundary conditions, material and geometrical parameters. The interesting results indicate that a graded nanocomposite volume fraction in two directions has a higher capability to reduce the natural frequency than conventional 1-D functionally graded nanocomposite materials.

78 FR 54653 - Proposed Data Collections Submitted for Public Comment and Recommendations

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-05

... materials on opinions about CRC screening tests. Each respondent will be randomly assigned to one of three... treatment group that receives a ``No Excuses'' educational flyer designed to dispel many common reasons for... randomly selected from the KN KnowledgePanel[supreg]. A pre-test of study procedures will be conducted...

Time domain simulation of the response of geometrically nonlinear panels subjected to random loading

NASA Technical Reports Server (NTRS)

Moyer, E. Thomas, Jr.

1988-01-01

The response of composite panels subjected to random pressure loads large enough to cause geometrically nonlinear responses is studied. A time domain simulation is employed to solve the equations of motion. An adaptive time stepping algorithm is employed to minimize intermittent transients. A modified algorithm for the prediction of response spectral density is presented which predicts smooth spectral peaks for discrete time histories. Results are presented for a number of input pressure levels and damping coefficients. Response distributions are calculated and compared with the analytical solution of the Fokker-Planck equations. RMS response is reported as a function of input pressure level and damping coefficient. Spectral densities are calculated for a number of examples.

Adult obesity: panel study from native Amazonians.

PubMed

Zeng, Wu; Eisenberg, Dan T A; Jovel, Karla Rubio; Undurraga, Eduardo A; Nyberg, Colleen; Tanner, Susan; Reyes-García, Victoria; Leonard, William R; Castaño, Juliana; Huanca, Tomás; McDade, Thomas W; Godoy, Ricardo

2013-03-01

This paper examines three morphological indicators measuring obesity among a native Amazonian population of foragers-farmers in Bolivia (Tsimane') and estimates the associations between them and standard covariates of obesity (e.g., socioeconomic status [SES]). We collected annual data from 350 non-pregnant women and 385 men ≥20 years of age from all 311 households in 13 villages during five consecutive years (2002-2006). We used three indicators to measure obesity: body-mass index (BMI), waist circumference (WC), and body fat using bioelectrical impedance analysis (BF-BIA). We ran separate individual random-effect panel multiple regressions for women and men with wealth, acculturation, health, and household food availability as key covariates, and controlled for village and year fixed effects and village×year interaction effects. Although BMI increases by a statistically significant annual growth rate of 0.64% among women and 0.37% among men over the five years, the increase does not yield significant biological meanings. Neither do we find consistent and biologically meaningful covariates associated with adult obesity. Copyright © 2012 Elsevier B.V. All rights reserved.

Dent and Flint maize diversity panels reveal important genetic potential for increasing biomass production.

PubMed

Rincent, R; Nicolas, S; Bouchet, S; Altmann, T; Brunel, D; Revilla, P; Malvar, R A; Moreno-Gonzalez, J; Campo, L; Melchinger, A E; Schipprack, W; Bauer, E; Schoen, C-C; Meyer, N; Ouzunova, M; Dubreuil, P; Giauffret, C; Madur, D; Combes, V; Dumas, F; Bauland, C; Jamin, P; Laborde, J; Flament, P; Moreau, L; Charcosset, A

2014-11-01

Genetic and phenotypic analysis of two complementary maize panels revealed an important variation for biomass yield. Flowering and biomass QTL were discovered by association mapping in both panels. The high whole plant biomass productivity of maize makes it a potential source of energy in animal feeding and biofuel production. The variability and the genetic determinism of traits related to biomass are poorly known. We analyzed two highly diverse panels of Dent and Flint lines representing complementary heterotic groups for Northern Europe. They were genotyped with the 50 k SNP-array and phenotyped as hybrids (crossed to a tester of the complementary pool) in a western European field trial network for traits related to flowering time, plant height, and biomass. The molecular information revealed to be a powerful tool for discovering different levels of structure and relatedness in both panels. This study revealed important variation and potential genetic progress for biomass production, even at constant precocity. Association mapping was run by combining genotypes and phenotypes in a mixed model with a random polygenic effect. This permitted the detection of significant associations, confirming height and flowering time quantitative trait loci (QTL) found in literature. Biomass yield QTL were detected in both panels but were unstable across the environments. Alternative kinship estimator only based on markers unlinked to the tested SNP increased the number of significant associations by around 40% with a satisfying control of the false positive rate. This study gave insights into the variability and the genetic architectures of biomass-related traits in Flint and Dent lines and suggests important potential of these two pools for breeding high biomass yielding hybrid varieties.

Comparative clinical study between the effect of fenofibrate alone and its combination with pentoxifylline on biochemical parameters and liver stiffness in patients with non-alcoholic fatty liver disease.

PubMed

El-Haggar, Sahar Mohamed; Mostafa, Tarek Mohamed

2015-07-01

Non-alcoholic fatty liver disease is a common health problem associated with increased liver and vascular specific complications. The purpose of this study was to assess and compare the effect of fenofibrate alone or in combination with pentoxifylline on the measured biochemical parameters, inflammatory pathway and liver stiffness in patients with non-alcoholic fatty liver disease. The study design was randomized controlled trial. From July 2013 to June 2014, we recruited 90 non-alcoholic fatty liver patients from the Internal Medicine Department at Tanta University Hospital, Egypt. They were classified randomly into two groups to receive fenofibrate 300 mg daily or fenofibrate 300 mg daily plus pentoxifylline 1200 mg/day in three divided doses for 24 weeks. Fasting blood sample was obtained before and 24 weeks after treatment for biochemical analysis of liver and lipid panels, tumor necrosis factor-alpha, hyaluronic acid, transforming growth factor beta 1, fasting plasma insulin and fasting glucose. Liver stiffness measurement was carried out using fibro-scan. Data were statistically analyzed by paired and unpaired Student's t test. The data obtained suggests that adding pentoxifylline to fenofibrate does not provide a beneficial effect on lipid panel, but has a beneficial effect on indirect biochemical markers of hepatic fibrosis, a direct marker linked to matrix deposition (hyaluronic acid), a cytokine/growth factor linked to liver fibrosis (transforming growth factor beta 1), the inflammatory pathway, insulin resistance and liver stiffness as compared to fenofibrate alone. The combination pentoxifylline plus fenofibrate may represent a new therapeutic strategy for non-alcoholic fatty liver disease as it resulted in more beneficial effects on direct and indirect markers of liver fibrosis, liver stiffness, insulin resistance and inflammatory pathway implicated in NAFLD.

[Study protocol on the effect of the economic crisis on mortality and reproductive health and health inequalities in Spain].

PubMed

Pérez, Glòria; Gotsens, Mercè; Palència, Laia; Marí-Dell'Olmo, Marc; Domínguez-Berjón, M Felicitas; Rodríguez-Sanz, Maica; Puig, Vanessa; Bartoll, Xavier; Gandarillas, Ana; Martín, Unai; Bacigalupe, Amaia; Díez, Elia; Ruiz, Miguel; Esnaola, Santiago; Calvo, Montserrat; Sánchez, Pablo; Luque Fernández, Miguel Ángel; Borrell, Carme

The aim is to present the protocol of the two sub-studies on the effect of the economic crisis on mortality and reproductive health and health inequalities in Spain. Substudy 1: describe the evolution of mortality and reproductive health between 1990 and 2013 through a longitudinal ecological study in the Autonomous Communities. This study will identify changes caused by the economic crisis in trends or reproductive health and mortality indicators using panel data (17 Autonomous Communities per study year) and adjusting Poisson models with random effects variance. Substudy 2: analyse inequalities by socioeconomic deprivation in mortality and reproductive health in several areas of Spain. An ecological study analysing trends in the pre-crisis (1999-2003 and 2004-2008) and crisis (2009-2013) periods will be performed. Random effects models Besag York and Mollié will be adjusted to estimate mortality indicators softened in reproductive health and census tracts. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Studies of Sound Absorption by and Transmission Through Layers of Elastic Noise Control Foams: Finite Element Modeling and Effects of Anisotropy

NASA Astrophysics Data System (ADS)

Kang, Yeon June

In this thesis an elastic-absorption finite element model of isotropic elastic porous noise control materials is first presented as a means of investigating the effects of finite dimension and edge constraints on the sound absorption by, and transmission through, layers of acoustical foams. Methods for coupling foam finite elements with conventional acoustic and structural finite elements are also described. The foam finite element model based on the Biot theory allows for the simultaneous propagation of the three types of waves known to exist in an elastic porous material. Various sets of boundary conditions appropriate for modeling open, membrane-sealed and panel-bonded foam surfaces are formulated and described. Good agreement was achieved when finite element predictions were compared with previously established analytical results for the plane wave absorption coefficient and transmission loss in the case of wave propagation both in foam-filled waveguides and through foam-lined double panel structures of infinite lateral extent. The primary effect of the edge constraints of a foam layer was found to be an acoustical stiffening of the foam. Constraining the ends of the facing panels in foam-lined double panel systems was also found to increase the sound transmission loss significantly in the low frequency range. In addition, a theoretical multi-dimensional model for wave propagation in anisotropic elastic porous materials was developed to study the effect of anisotropy on the sound transmission of foam-lined noise control treatments. The predictions of the theoretical anisotropic model have been compared with experimental measurements for the random incidence sound transmission through double panel structure lined with polyimide foam. The predictions were made by using the measured and estimated macroscopic physical parameters of polyimide foam samples which were known to be anisotropic. It has been found that the macroscopic physical parameters in the direction normal to the face of foam layer play the principal role in determining the acoustical behavior of polyimide foam layers, although more satisfactory agreement between experimental measurements and theoretical predictions of transmission loss is obtained when the anisotropic properties are allowed in the model.

Socio-Economic Factors Influencing on Total Fertility Rate in Iran: A Panel Data Analysis for the Period of 2002–2012

PubMed Central

Jafari, Hasan; Jaafaripooyan, Ebrahim; Vedadhir, Abou Ali; Foroushani, Abbas Rahimi; Ahadinejad, Bahman; Pourreza, Abolghasem

2016-01-01

Introduction Over the last few decades, total fertility rate (TFR) has followed a downward trend in Iran. The consequences of this trend from the perspectives of some are negative. Considering the macro-population policies in recent years, this study aimed to examine the effect of some macro socio-economic variables, including divorce, marriage, urbanization, and unemployment rate on TFR in Iran from 2002 to 2012. Methods This time series research was conducted in 2015 using the databases of the National Organization for Civil Registration (NOCR) and the Statistical Center of Iran. The study population was the related data of provinces in the selected variables. The main methods used in the research were the common unit root test, Pedroni Cointegration test, redundant fixed effects tests, correlated random effects-Hausman test, and panel least squares of fixed effects. In order to determine the suitable model for estimating panel data, likelihood ratio and Huasman tests were done using Eviews software, and the fixed effects regression model was chosen as the dominant model. Results The results indicated that the divorce rate had a negative and significant effect on TFR (p < 0.05). A positive and significant relationship between marriage rate and TFR variables also was observed (p < 0.05). Urbanization rate (p = 0.24) and unemployment rate (p = 0.36) had no significant relationship with TFR. According to F statistic, significance of the overall model also was confirmed (p < 0.001). Conclusion Due to the lower effect of the studied factors on the reduction of TFR, it seems that variables other than the ones studied, as well as cultural factors and values, might be fundamental factors for this change in the country. PMID:27504172

Particulate air pollution and panel studies in children: a systematic review

PubMed Central

Ward, D; Ayres, J

2004-01-01

Aims: To systematically review the results of such studies in children, estimate summary measures of effect, and investigate potential sources of heterogeneity. Methods: Studies were identified by searching electronic databases to June 2002, including those where outcomes and particulate level measurements were made at least daily for ⩾8 weeks, and analysed using an appropriate regression model. Study results were compared using forest plots, and fixed and random effects summary effect estimates obtained. Publication bias was considered using a funnel plot. Results: Twenty two studies were identified, all except two reporting PM10 (24 hour mean) >50 µg.m-3. Reported effects of PM10 on PEF were widely spread and smaller than those for PM2.5 (fixed effects summary: -0.012 v -0.063 l.min-1 per µg.m-3 rise). A similar pattern was evident for symptoms. Random effects models produced larger estimates. Overall, in between-study comparisons, panels of children with diagnosed asthma or pre-existing respiratory symptoms appeared less affected by PM10 levels than those without, and effect estimates were larger where studies were conducted in higher ozone conditions. Larger PM10 effect estimates were obtained from studies using generalised estimating equations to model autocorrelation and where results were derived by pooling subject specific regression coefficients. A funnel plot of PM10 results for PEF was markedly asymmetrical. Conclusions: The majority of identified studies indicate an adverse effect of particulate air pollution that is greater for PM2.5 than PM10. However, results show considerable heterogeneity and there is evidence consistent with publication bias, so limited confidence may be placed on summary estimates of effect. The possibility of interaction between particle and ozone effects merits further investigation, as does variability due to analytical differences that alter the interpretation of final estimates. PMID:15031404

Novel Δ9-tetrahydrocannabinol formulation Namisol® has beneficial pharmacokinetics and promising pharmacodynamic effects

PubMed Central

Klumpers, Linda E; Beumer, Tim L; van Hasselt, Johan G C; Lipplaa, Astrid; Karger, Lennard B; Kleinloog, H Daniël; Freijer, Jan I; de Kam, Marieke L; van Gerven, Joop M A

2012-01-01

AIMS Among the main disadvantages of currently available Δ9-tetrahydrocannabinol (THC) formulations are dosing difficulties due to poor pharmacokinetic characteristics. Namisol® is a novel THC formulation, designed to improve THC absorption. The study objectives were to investigate the optimal administration route, pharmacokinetics (PK), pharmacodynamics (PD) and tolerability of Namisol®. METHODS This first in human study consisted of two parts. Panel I included healthy males and females (n = 6/6) in a double-blind, double-dummy, randomized, crossover study with sublingual (crushed tablet) and oral administration of Namisol® (5 mg THC). Based on these results, male and female (n = 4/5) participants from panel I received oral THC 6.5 and 8.0 mg or matching placebo in a randomized, crossover, rising dose study during panel II. PD measurements were body sway; visual analogue scales (VAS) mood, psychedelic and heart rate. THC and 11-OH-THC population PK analysis was performed. RESULTS Sublingual administration showed a flat concentration profile compared with oral administration. Oral THC apparent t1/2 was 72–80 min, tmax was 39–56 min and Cmax 2.92–4.69 ng ml−1. THC affected body sway (60.8%, 95% CI 29.5, 99.8), external perception (0.078 log mm, 95% CI 0.019, 0.137), alertness (−2.7 mm, 95% CI −4.5, −0.9) feeling high (0.256 log mm, 95% CI 0.093, 0.418) and heart rate (5.6 beats min–1, 95% CI 2.7, 6.5). Namisol® was well tolerated. CONCLUSIONS Oral Namisol® showed promising PK and PD characteristics. Variability and tmax of THC plasma concentrations were smaller for Namisol® than reported for studies using oral dronabinol and nabilone. This study was performed in a limited number of healthy volunteers. Therefore, future research on Namisol® should study clinical effects in patient populations. PMID:22680341

Analysis of stationary and dynamic factors affecting highway accident occurrence: A dynamic correlated grouped random parameters binary logit approach.

PubMed

Fountas, Grigorios; Sarwar, Md Tawfiq; Anastasopoulos, Panagiotis Ch; Blatt, Alan; Majka, Kevin

2018-04-01

Traditional accident analysis typically explores non-time-varying (stationary) factors that affect accident occurrence on roadway segments. However, the impact of time-varying (dynamic) factors is not thoroughly investigated. This paper seeks to simultaneously identify pre-crash stationary and dynamic factors of accident occurrence, while accounting for unobserved heterogeneity. Using highly disaggregate information for the potential dynamic factors, and aggregate data for the traditional stationary elements, a dynamic binary random parameters (mixed) logit framework is employed. With this approach, the dynamic nature of weather-related, and driving- and pavement-condition information is jointly investigated with traditional roadway geometric and traffic characteristics. To additionally account for the combined effect of the dynamic and stationary factors on the accident occurrence, the developed random parameters logit framework allows for possible correlations among the random parameters. The analysis is based on crash and non-crash observations between 2011 and 2013, drawn from urban and rural highway segments in the state of Washington. The findings show that the proposed methodological framework can account for both stationary and dynamic factors affecting accident occurrence probabilities, for panel effects, for unobserved heterogeneity through the use of random parameters, and for possible correlation among the latter. The comparative evaluation among the correlated grouped random parameters, the uncorrelated random parameters logit models, and their fixed parameters logit counterpart, demonstrate the potential of the random parameters modeling, in general, and the benefits of the correlated grouped random parameters approach, specifically, in terms of statistical fit and explanatory power. Published by Elsevier Ltd.

Limit Theory for Panel Data Models with Cross Sectional Dependence and Sequential Exogeneity

PubMed Central

Kuersteiner, Guido M.; Prucha, Ingmar R.

2013-01-01

The paper derives a general Central Limit Theorem (CLT) and asymptotic distributions for sample moments related to panel data models with large n. The results allow for the data to be cross sectionally dependent, while at the same time allowing the regressors to be only sequentially rather than strictly exogenous. The setup is sufficiently general to accommodate situations where cross sectional dependence stems from spatial interactions and/or from the presence of common factors. The latter leads to the need for random norming. The limit theorem for sample moments is derived by showing that the moment conditions can be recast such that a martingale difference array central limit theorem can be applied. We prove such a central limit theorem by first extending results for stable convergence in Hall and Hedye (1980) to non-nested martingale arrays relevant for our applications. We illustrate our result by establishing a generalized estimation theory for GMM estimators of a fixed effect panel model without imposing i.i.d. or strict exogeneity conditions. We also discuss a class of Maximum Likelihood (ML) estimators that can be analyzed using our CLT. PMID:23794781

[Modeling of an influence of indicators of social stress on demographic processes in regions of the Russian Federation].

PubMed

Burkin, M M; Molchanova, E V

To assess an impact of indicators of social stress on demographic processes in regions of the Russian Federation using statistical methods. The data of Rosstat «Regions of Russia» and «Health care in Russia» were used as information base. Indicators of about 80 subjects of the Russian Federation (without autonomous areas) for the ten-year period (2005-2014) have been created in the form of the database consisting of the following blocks: medico-demographic situation, level of economic development of the territory and wellbeing of the population, development of social infrastructure, ecological and climatic conditions, scientific researches and innovations. In total, there were about 70 indicators. Panel data for 80 regions of Russia in 10 years, which combine both indicators of spatial type (cross-section data), and information on temporary ranks (time-series data), were used. Various models of regression according to the panel data have been realized: the integrated model of regression (pooled model), regression model with the fixed effects (fixed effect model), regression model with random effects (random effect model). Main demographic indicators (life expectancy, birth rate, mortality from the external reasons) are to a great extent connected with socio-economic factors. Social tension (social stress) caused by transition to market economy plays an important role. The integral assessment of the impact of the average per capita monetary income, incidence of alcoholism and alcoholic psychoses, criminality, sales volume of alcoholic beverages per capita and marriage relations on demographic indicators is presented. Results of modeling allow to define the priority directions in the field of development of mental health and psychotherapeutic services in the regions of the Russian Federation.

Max Launch Abort System (MLAS) Pad Abort Test Vehicle (PATV) II Attitude Control System (ACS) Integration and Pressurization Subsystem Dynamic Random Vibration Analysis

NASA Technical Reports Server (NTRS)

Ekrami, Yasamin; Cook, Joseph S.

2011-01-01

In order to mitigate catastrophic failures on future generation space vehicles, engineers at the National Aeronautics and Space Administration have begun to integrate a novel crew abort systems that could pull a crew module away in case of an emergency at the launch pad or during ascent. The Max Launch Abort System (MLAS) is a recent test vehicle that was designed as an alternative to the baseline Orion Launch Abort System (LAS) to demonstrate the performance of a "tower-less" LAS configuration under abort conditions. The MLAS II test vehicle will execute a propulsive coast stabilization maneuver during abort to control the vehicles trajectory and thrust. To accomplish this, the spacecraft will integrate an Attitude Control System (ACS) with eight hypergolic monomethyl hydrazine liquid propulsion engines that are capable of operating in a quick pulsing mode. Two main elements of the ACS include a propellant distribution subsystem and a pressurization subsystem to regulate the flow of pressurized gas to the propellant tanks and the engines. The CAD assembly of the Attitude Control System (ACS) was configured and integrated into the Launch Abort Vehicle (LAV) design. A dynamic random vibration analysis was conducted on the Main Propulsion System (MPS) helium pressurization panels to assess the response of the panel and its components under increased gravitational acceleration loads during flight. The results indicated that the panels fundamental and natural frequencies were farther from the maximum Acceleration Spectral Density (ASD) vibrations which were in the range of 150-300 Hz. These values will direct how the components will be packaged in the vehicle to reduce the effects high gravitational loads.

Deciding what type of evidence and outcomes to include in guidelines: article 5 in Integrating and coordinating efforts in COPD guideline development. An official ATS/ERS workshop report.

PubMed

Wilt, Timothy J; Guyatt, Gordon; Kunz, Regina; Macnee, William; Puhan, Milo A; Viegi, Giovanni; Woodhead, Mark; Akl, Elie A; Schünemann, Holger J

2012-12-01

Professional societies, like many other organizations around the world, have recognized the need to use more rigorous processes to ensure that health care recommendations are informed by the best available research evidence. This is the fifth of a series of 14 articles that were prepared by an international panel to advise guideline developers in respiratory and other diseases on approaches for guideline development. This article focuses on what type of evidence and outcomes to include in guidelines. In this review we addressed the following topics and questions. (1) What methods should be used to select important outcomes? (2) What types of outcomes should be considered? (3) What sources of evidence should be considered? (4) How should the importance of outcomes be ranked? (5) How to deal with surrogate outcomes. (6) What issues related to outcomes should be considered in the evidence review? (7) What quality of evidence should be used? (8) How to interpret the effect on outcomes. (9) How to incorporate outcomes related to harm. We based our responses on a PubMed literature review, prior reviews, relevant methodological research, and workshop discussions. Guideline panels should use transparent and systematic methods to select both the evidence and important outcomes, with input from groups that represent a wide range of expertise and constituencies. Outcomes should address both benefits and downsides, with consideration of the definitions, severity, and time course of the outcomes. Guideline panels should use a transparent approach to rank outcome importance recognizing that stakeholder and patient values and preferences may vary. Intermediate and surrogate outcomes are frequently reported, but their correlation with patient important outcomes may be low. A guideline panel should determine a priori the magnitude of effect judged clinically significant, factors that may influence outcome reporting, and whether different ways of measuring the outcomes permit the outcomes to be combined. Comprehensive identification of the evidence includes the use of multiple data sources. While randomized controlled trials (RCTs) provide the highest quality evidence, reviewers of evidence also need to consider nonrandomized studies such as case series, registries, and case-control studies if randomized trials are not available. This is particularly true for harms. The outcomes reported from RCTs may not always directly apply to clinical practice settings (i.e., they may not be generalizable).

Developing a novel panel of genome-wide ancestry informative markers for bio-geographical ancestry estimates.

PubMed

Jia, Jing; Wei, Yi-Liang; Qin, Cui-Jiao; Hu, Lan; Wan, Li-Hua; Li, Cai-Xia

2014-01-01

Inferring the ancestral origin of DNA samples can be helpful in correcting population stratification in disease association studies or guiding crime investigations. Populations throughout the world vary in appearance features and biological characteristics. Based on this idea, we performed a genome-wide scan for SNPs within genes that are related to physical and biological traits. Using the HapMap database, we screened 52 genes and their flanking regions. Thirty-five SNPs that displayed highly contrasting allele frequencies (F(st)>0.3, linkage disequilibrium r(2)<0.2, and Hardy-Weinberg equilibrium P>0.001) among Africans, Europeans, and East Asians were selected and validated. A multiplexed assay was developed to genotype these 35 SNPs in 357 individuals from 10 populations worldwide. This panel provided accurate estimates of individual ancestry proportions with balanced discriminatory power among the three continental ancestries: Africans, Europeans, and East Asians. It also proved very effective in evaluating admixed populations living in joint regions of continents (e.g., Uyghurs and Indians) and discriminating some subpopulations within each of the three continents. Structure analysis was performed to establish and evaluate the panel of ancestry-informative markers, and the components of each population were also described to indicate the structural composition. The 21 population structures in our study are consistent with geographic patterns, and individuals were properly assigned to their original ancestral populations with proportion analyses and random match probability calculations. Thus, the panel and its population information will be useful resources to minimize the effects of population stratification in association analyses and to assign the most likely origin of an unknown DNA contributor in forensic investigations. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Structural Acoustic Response of a Shape Memory Alloy Hybrid Composite Panel (Lessons Learned)

NASA Technical Reports Server (NTRS)

Turner, Travis L.

2002-01-01

This study presents results from an effort to fabricate a shape memory alloy hybrid composite (SMAHC) panel specimen and test the structure for dynamic response and noise transmission characteristics under the action of thermal and random acoustic loads. A method for fabricating a SMAHC laminate with bi-directional SMA reinforcement is described. Glass-epoxy unidirectional prepreg tape and Nitinol ribbon comprise the material system. Thermal activation of the Nitinol actuators was achieved through resistive heating. The experimental hardware required for mechanical support of the panel/actuators and for establishing convenient electrical connectivity to the actuators is presented. Other experimental apparatus necessary for controlling the panel temperature and acquiring structural acoustic data are also described. Deficiency in the thermal control system was discovered in the process of performing the elevated temperature tests. Discussion of the experimental results focuses on determining the causes for the deficiency and establishing means for rectifying the problem.

Structural acoustic response of a shape memory alloy hybrid composite panel (lessons learned)

NASA Astrophysics Data System (ADS)

Turner, Travis L.

2002-07-01

This study presents results from an effort to fabricate a shape memory alloy hybrid composite (SMAHC) panel specimen and test the structure for dynamic response and noise transmission characteristics under the action of thermal and random acoustic loads. A method for fabricating a SMAHC laminate with bi-directional SMA reinforcement is described. Glass-epoxy unidirectional prepreg tape and Nitinol ribbon comprise the material system. Thermal activation of the Nitinol actuators was achieved through resistive heating. The experimental hardware required for mechanical support of the panel/actuators and for establishing convenient electrical connectivity to the actuators is presented. Other experimental apparatus necessary for controlling the panel temperature and acquiring structural acoustic data are also described. Deficiency in the thermal control system was discovered in the process of performing the elevated temperature tests. Discussion of the experimental results focuses on determining the causes for the deficiency and establishing means for rectifying the problem.

Using Panel Vendors for Recruitment Into a Web-Based Family Prevention Program: Methodological Considerations.

PubMed

Wang-Schweig, Meme; Miller, Brenda A; Buller, David B; Byrnes, Hilary F; Bourdeau, Beth; Rogers, Veronica

2017-01-01

Use of online panel vendors in research has grown over the past decade. Panel vendors are organizations that recruit participants into a panel to take part in web-based surveys and match panelists to a target audience for data collection. We used two panel vendors to recruit families ( N = 411) with a 16- to 17-year-old teen to participate in a randomized control trial (RCT) of an online family-based program to prevent underage drinking and risky sexual behaviors. Our article addresses the following research questions: (1) How well do panel vendors provide a sample of families who meet our inclusion criteria to participate in a RCT? (2) How well do panel vendors provide a sample of families who reflect the characteristics of the general population? and (3) Does the choice of vendor influence the characteristics of families that we engage in research? Despite the screening techniques used by the panel vendors to identify families who met our inclusion criteria, 23.8% were found ineligible when research staff verified their eligibility by direct telephone contact. Compared to the general U.S. population, our sample had more Whites and more families with higher education levels. Finally, across the two panel vendors, there were no significant differences in the characteristics of families, except for mean age. The online environment provides opportunities for new methods to recruit participants in research studies. However, innovative recruitment methods need careful study to ensure the quality of their samples.

The invisible hand and EKC hypothesis: what are the drivers of environmental degradation and pollution in Africa?

PubMed

Sarkodie, Samuel Asumadu

2018-05-24

This study examined the drivers of environmental degradation and pollution in 17 countries in Africa from 1971 to 2013. The empirical study was analyzed with Westerlund error-correction model and panel cointegration tests with 1000 bootstrapping samples, U-shape test, fixed and random effect estimators, and panel causality test. The investigation of the nexus between environmental pollution economic growth in Africa confirms the validity of the EKC hypothesis in Africa at a turning point of US$ 5702 GDP per capita. However, the nexus between environmental degradation and economic growth reveals a U shape at a lower bound GDP of US$ 101/capita and upper bound GDP of US$ 8050/capita, at a turning point of US$ 7958 GDP per capita, confirming the scale effect hypothesis. The empirical findings revealed that energy consumption, food production, economic growth, permanent crop, agricultural land, birth rate, and fertility rate play a major role in environmental degradation and pollution in Africa, thus supporting the global indicators for achieving the sustainable development goals by 2030.

The influence of SO4 and NO3 to the acidity (pH) of rainwater using minimum variance quadratic unbiased estimation (MIVQUE) and maximum likelihood methods

NASA Astrophysics Data System (ADS)

Dilla, Shintia Ulfa; Andriyana, Yudhie; Sudartianto

2017-03-01

Acid rain causes many bad effects in life. It is formed by two strong acids, sulfuric acid (H2SO4) and nitric acid (HNO3), where sulfuric acid is derived from SO2 and nitric acid from NOx {x=1,2}. The purpose of the research is to find out the influence of So4 and NO3 levels contained in the rain to the acidity (pH) of rainwater. The data are incomplete panel data with two-way error component model. The panel data is a collection of some of the observations that observed from time to time. It is said incomplete if each individual has a different amount of observation. The model used in this research is in the form of random effects model (REM). Minimum variance quadratic unbiased estimation (MIVQUE) is used to estimate the variance error components, while maximum likelihood estimation is used to estimate the parameters. As a result, we obtain the following model: Ŷ* = 0.41276446 - 0.00107302X1 + 0.00215470X2.

Comparison of the Effects of Public and Private Health Expenditures on the Health Status: A Panel Data Analysis in Eastern Mediterranean Countries

PubMed Central

Homaie Rad, Enayatollah; Vahedi, Sajad; Teimourizad, Abedin; Esmaeilzadeh, Firooz; Hadian, Mohamad; Torabi Pour, Amin

2013-01-01

Background: Health expenditures are divided in two parts of public and private health expenditures. Public health expenditures contain social security spending, taxing to private and public sectors, and foreign resources like loans and subventions. On the other hand, private health expenditures contain out of pocket expenditures and private insurances. Each of these has different effects on the health status. The present study aims to compare the effects of these expenditures on health in Eastern Mediterranean Region (EMR). Methods: In this study, infant mortality rate was considered as an indicator of health status. We estimated the model using the panel data of EMR countries between 1995 and 2010. First, we used Pesaran CD test followed by Pesaran’s CADF unit root test. After the confirmation of having unit root, we used Westerlund panel cointegration test and found that the model was cointegrated and then after using Hausman and Breusch-Pagan tests, we estimated the model using the random effects. Results: The results showed that the public health expenditures had a strong negative relationship with infant mortality rate. However, a positive relationship was found between the private health expenditures and infant mortality rate (IMR). The relationship for public health expenditures was significant, but for private health expenditures was not. Conclusion: The study findings showed that the public health expenditures in the EMR countries improved health outcome, while the private health expenditures did not have any significant relationship with health status, so often increasing the public health expenditures leads to reduce IMR. But this relationship was not significant because of contradictory effects for poor and wealthy peoples. PMID:24596857

Comparison of the effects of public and private health expenditures on the health status: a panel data analysis in eastern mediterranean countries.

PubMed

Homaie Rad, Enayatollah; Vahedi, Sajad; Teimourizad, Abedin; Esmaeilzadeh, Firooz; Hadian, Mohamad; Torabi Pour, Amin

2013-08-01

Health expenditures are divided in two parts of public and private health expenditures. Public health expenditures contain social security spending, taxing to private and public sectors, and foreign resources like loans and subventions. On the other hand, private health expenditures contain out of pocket expenditures and private insurances. Each of these has different effects on the health status. The present study aims to compare the effects of these expenditures on health in Eastern Mediterranean Region (EMR). In this study, infant mortality rate was considered as an indicator of health status. We estimated the model using the panel data of EMR countries between 1995 and 2010. First, we used Pesaran CD test followed by Pesaran's CADF unit root test. After the confirmation of having unit root, we used Westerlund panel cointegration test and found that the model was cointegrated and then after using Hausman and Breusch-Pagan tests, we estimated the model using the random effects. The results showed that the public health expenditures had a strong negative relationship with infant mortality rate. However, a positive relationship was found between the private health expenditures and infant mortality rate (IMR). The relationship for public health expenditures was significant, but for private health expenditures was not. The study findings showed that the public health expenditures in the EMR countries improved health outcome, while the private health expenditures did not have any significant relationship with health status, so often increasing the public health expenditures leads to reduce IMR. But this relationship was not significant because of contradictory effects for poor and wealthy peoples.

Diabetes Care Management Teams Did Not Reduce Utilization When Compared With Traditional Care: A Randomized Cluster Trial.

PubMed

Kearns, Patrick

2017-10-01

PURPOSE: Health services research evaluates redesign models for primary care. Care management is one alternative. Evaluation includes resource utilization as a criterion. Compare the impact of care-manager teams on resource utilization. The comparison includes entire panes of patients and the subset of patients with diabetes. DESIGN: Randomized, prospective, cohort study comparing change in utilization rates between groups, pre- and post-intervention. METHODOLOGY: Ten primary care physician panels in a safety-net setting. Ten physicians were randomized to either a care-management approach (Group 1) or a traditional approach (Group 2). Care managers focused on diabetes and the cardiovascular cluster of diseases. Analysis compared rates of hospitalization, 30-day readmission, emergency room visits, and urgent care visits. Analysis compared baseline rates to annual rates after a yearlong run-in for entire panels and the subset of patients with diabetes. RESULTS: Resource utilization showed no statistically significant change between baseline and Year 3 (P=.79). Emergency room visits and hospital readmission increased for both groups (P=.90), while hospital admissions and urgent care visits decreased (P=.73). Similarly, utilization was not significantly different for patients with diabetes (P=.69). CONCLUSIONS: A care-management team approach failed to improve resource utilization rates by entire panels and the subset of diabetic patients compared to traditional care. This reinforces the need for further evidentiary support for the care-management model's hypothesis in the safety net.

A point-of-care chemistry test for reduction of turnaround and clinical decision time.

PubMed

Lee, Eui Jung; Shin, Sang Do; Song, Kyoung Jun; Kim, Seong Chun; Cho, Jin Seong; Lee, Seung Chul; Park, Ju Ok; Cha, Won Chul

2011-06-01

Our study compared clinical decision time between patients managed with a point-of-care chemistry test (POCT) and patients managed with the traditional central laboratory test (CLT). This was a randomized controlled multicenter trial in the emergency departments (EDs) of 5 academic teaching hospitals. We randomly assigned patients to POCT or CLT stratified by the Emergency Severity Index. A POCT chemistry analyzer (Piccolo; Abaxis, Inc, Union City, Calif), which is able to test liver panel, renal panel, pancreas enzymes, lipid panel, electrolytes, and blood gases, was set up in each ED. Primary and secondary end point was turnaround time and door-to-clinical-decision time. The total 2323 patients were randomly assigned to the POCT group (n = 1167) or to the CLT group (n = 1156). All of the basic characteristics were similar in the 2 groups. The turnaround time (median, interquartile range [IQR]) of the POCT group was shorter than that of the CLT group (14, 12-19 versus 55, 45-69 minutes; P < .0001). The median (IQR) door-to-clinical-decision time was also shorter in the POCT compared with the CLT group (46, 33-61 versus 86, 68-107 minutes; P < .0001). The proportion of patients who had new decisions within 60 minutes was 72.8% for the POCT group and 12.5% for the CLT group (P < .0001). A POCT chemistry analyzer in the ED shortens the test turnaround and ED clinical decision times compared with CLT. Copyright © 2011 Elsevier Inc. All rights reserved.

Public attitudes to genomic science: an experiment in information provision.

PubMed

Sturgis, Patrick; Brunton-Smith, Ian; Fife-Schaw, Chris

2010-03-01

We use an experimental panel study design to investigate the effect of providing "value-neutral" information about genomic science in the form of a short film to a random sample of the British public. We find little evidence of attitude change as a function of information provision. However, our results show that information provision significantly increased dropout from the study amongst less educated respondents. Our findings have implications both for our understanding of the knowledge-attitude relationship in public opinion toward genomic science and for science communication more generally.

Increase in transmission loss of single panels by addition of mass inclusions to a poro-elastic layer: Experimental investigation

NASA Astrophysics Data System (ADS)

Kidner, M. R. F.; Fuller, C. R.; Gardner, B.

2006-06-01

The insertion loss of standard acoustic blankets can be significantly improved at low frequencies by the addition of randomly placed mass inclusions to the poro-elastic layers. The improvement is much greater than that due to the mass effect alone. The mass inclusions act as resonant systems and so increase the structure impedance. This paper reports the results of experimental investigations into this phenomenon. Increases in insertion loss of 15 dB in the 100 Hz third octave band are reported.

Estimators used in the New Mexico inventory: practical implications of "truly" random nonresponse within each stratum

Treesearch

Paul L. Patterson; Sara A. Goeking

2012-01-01

The annual forest inventory of New Mexico began as an accelerated inventory, and 8 of the 10 Phase 2 panels were sampled between 2008 and 2011. The inventory includes a large proportion of nonresponse. FIA's estimation process uses post-stratification and assumes that nonresponse occurs at random within each stratum. We construct an estimator for the New Mexico...

Free internet access, the digital divide, and health information.

PubMed

Wagner, Todd H; Bundorf, M Kate; Singer, Sara J; Baker, Laurence C

2005-04-01

The Internet has emerged as a valuable tool for health information. Half of the U.S. population lacked Internet access in 2001, creating concerns about those without access. Starting in 1999, a survey firm randomly invited individuals to join their research panel in return for free Internet access. This provides a unique setting to study the ways that people who had not previously obtained Internet access use the Internet when it becomes available to them. In 2001-2002, we surveyed 12,878 individuals 21 years of age and older on the research panel regarding use of the Internet for health; 8935 (69%) responded. We analyzed respondents who had no prior Internet access, and then compared this group to those who had prior Internet access. Among those newly provided free Internet access, 24% had used the Internet for health information in the past year, and users reported notable benefits, such as improved knowledge and self-care abilities. Not surprisingly, the no-prior-Internet group reported lower rates of using the Internet (24%) than the group that had obtained Internet access prior to joining the research panel (40%), but the 2 groups reported similar perceptions of the Internet and self-reported effects. Those who obtained Internet access for the first time by joining the panel used the Internet for health and appeared to benefit from it. Access helps explain the digital divide, although most people given free access do not use the Internet for health information.

The false security of blind dates: chrononymization's lack of impact on data privacy of laboratory data.

PubMed

Cimino, J J

2012-01-01

The reuse of clinical data for research purposes requires methods for the protection of personal privacy. One general approach is the removal of personal identifiers from the data. A frequent part of this anonymization process is the removal of times and dates, which we refer to as "chrononymization." While this step can make the association with identified data (such as public information or a small sample of patient information) more difficult, it comes at a cost to the usefulness of the data for research. We sought to determine whether removal of dates from common laboratory test panels offers any advantage in protecting such data from re-identification. We obtained a set of results for 5.9 million laboratory panels from the National Institutes of Health's (NIH) Biomedical Translational Research Information System (BTRIS), selected a random set of 20,000 panels from the larger source sets, and then identified all matches between the sets. We found that while removal of dates could hinder the re-identification of a single test result, such removal had almost no effect when entire panels were used. Our results suggest that reliance on chrononymization provides a false sense of security for the protection of laboratory test results. As a result of this study, the NIH has chosen to rely on policy solutions, such as strong data use agreements, rather than removal of dates when reusing clinical data for research purposes.

The False Security of Blind Dates

PubMed Central

Cimino, J.J.

2012-01-01

Background The reuse of clinical data for research purposes requires methods for the protection of personal privacy. One general approach is the removal of personal identifiers from the data. A frequent part of this anonymization process is the removal of times and dates, which we refer to as “chrononymization.” While this step can make the association with identified data (such as public information or a small sample of patient information) more difficult, it comes at a cost to the usefulness of the data for research. Objectives We sought to determine whether removal of dates from common laboratory test panels offers any advantage in protecting such data from re-identification. Methods We obtained a set of results for 5.9 million laboratory panels from the National Institutes of Health’s (NIH) Biomedical Translational Research Information System (BTRIS), selected a random set of 20,000 panels from the larger source sets, and then identified all matches between the sets. Results We found that while removal of dates could hinder the re-identification of a single test result, such removal had almost no effect when entire panels were used. Conclusions Our results suggest that reliance on chrononymization provides a false sense of security for the protection of laboratory test results. As a result of this study, the NIH has chosen to rely on policy solutions, such as strong data use agreements, rather than removal of dates when reusing clinical data for research purposes. PMID:23646086

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nour, Ali, E-mail: ali.nour@polymtl.ca; Hydro Quebec, Montreal, Quebec, H2L 4P5; Massicotte, Bruno

This study is aimed at proposing a simple analytical model to investigate the post-cracking behaviour of FRC panels, using an arbitrary tension softening, stress crack opening diagram, as the input. A new relationship that links the crack opening to the panel deflection is proposed. Due to the stochastic nature of material properties, the random fibre distribution, and other uncertainties that are involved in concrete mix, this relationship is developed from the analysis of beams having the same thickness using the Monte Carlo simulation (MCS) technique. The softening diagrams obtained from direct tensile tests are used as the input for themore » calculation, in a deterministic way, of the mean load displacement response of round panels. A good agreement is found between the model predictions and the experimental results.« less

Performance characteristics of the ARCHITECT anti-HCV assay.

PubMed

Jonas, Gesa; Pelzer, Claudia; Beckert, Christian; Hausmann, Michael; Kapprell, Hans-Peter

2005-10-01

The ARCHITECT Anti-HCV assay is a fully automated high throughput chemiluminescent microparticle immunoassay (CMIA) for the detection of antibodies to structural and nonstructural proteins of the hepatitis C virus (HCV). To further enhance the performance of this test, the assay was modified to improve the specificity for blood donor specimens. The specificity of the enhanced ARCHITECT Anti-HCV assay was evaluated by screening blood donor samples randomly collected from various German blood banks, as well as hospitalized patient samples derived from Germany and the US. Additionally, antibody sensitivity was determined on commercially available anti-HCV seroconversion panels and on a commercially available worldwide anti-HCV genotype performance panel. Apparent specificity of the modified ARCHITECT Anti-HCV assay in a blood donor population consisting of 3811 specimens was 99.92%, compared to 99.76% for the current on-market assay. Additionally, antibody sensitivity was determined on commercially available anti-HCV seroconversion panels. Seroconversion sensitivity equivalent to or better than the current on-market product was observed by testing 33 seroconversion panels. This study demonstrates that the modified version of the ARCHITECT Anti-HCV assay shows improved specificity for blood donor specimens compared to the current assay on market without compromising sensitivity. With the availability of the improved ARCHITECT Anti-HCV assay and the recent launch of the ARCHITECT HIV Ag/Ab Combo assay, the ARCHITECT system now offers a full hepatitis/retrovirus menu with excellent performance on a high throughput, random access, automated analyzer, ideally suited for blood screening and diagnostic applications.

Consumer Understanding, Preferences, and Responses to Different Versions of Drug Safety Messages in the United States: A Randomized Controlled Trial.

PubMed

McCormack, Lauren; Craig Lefebvre, R; Bann, Carla; Taylor, Olivia; Rausch, Paula

2016-02-01

As part of its mission, the US Food and Drug Administration (FDA) communicates with the public regularly about the benefits and risks of prescription and over-the-counter (OTC) drugs. Effectively communicating risk, however, is a significant public health challenge. To better understand how different populations understand information communicated by the FDA about drug safety, we conducted a randomized experiment to examine comprehension and other measures of effectiveness of drug safety messages that occurred in a post-market surveillance phase. We used an Internet panel survey of 1244 consumers, of whom 58% used prescription drugs in the past year. Half of the sample panel was randomized to read a previous FDA Drug Safety Communication (DSC) with the drug name changed, and the other half was randomized to read a revised version of the same DSC. We examined how making certain modifications to the way drug risk information is communicated has an impact on comprehension and behavioral intentions, including the user's likelihood of discontinuing the drug. We also studied how comprehension varied by respondent characteristics, health literacy skills, risk perceptions, and trust in the message. Based on a five-item comprehension index, the revised version of the message was associated with significantly greater comprehension of the information relative to the standard version (63 vs 52% correct, p < 0.001). Significantly more respondents found the revised version to be clear (82 vs 73%, p < 0.000), while fewer in that group reported learning something new (78% vs 84%, p = 0.015). No significant differences emerged between the two groups in terms of the message being informative, convincing, or helpful. We found no significant differences between the two groups in terms of behavioral intentions, risk perception, and trust. We found that making plain language changes to the DSC significantly increased consumers' level of comprehension of its content, providing support for ongoing use and further exploration of these strategies in pharmacovigilance communication research. The study findings have important implications for future drug safety and other communication messages related to prescription drugs.

Causal inference from observational data.

PubMed

Listl, Stefan; Jürges, Hendrik; Watt, Richard G

2016-10-01

Randomized controlled trials have long been considered the 'gold standard' for causal inference in clinical research. In the absence of randomized experiments, identification of reliable intervention points to improve oral health is often perceived as a challenge. But other fields of science, such as social science, have always been challenged by ethical constraints to conducting randomized controlled trials. Methods have been established to make causal inference using observational data, and these methods are becoming increasingly relevant in clinical medicine, health policy and public health research. This study provides an overview of state-of-the-art methods specifically designed for causal inference in observational data, including difference-in-differences (DiD) analyses, instrumental variables (IV), regression discontinuity designs (RDD) and fixed-effects panel data analysis. The described methods may be particularly useful in dental research, not least because of the increasing availability of routinely collected administrative data and electronic health records ('big data'). © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Improvement of Predictive Ability by Uniform Coverage of the Target Genetic Space

PubMed Central

Bustos-Korts, Daniela; Malosetti, Marcos; Chapman, Scott; Biddulph, Ben; van Eeuwijk, Fred

2016-01-01

Genome-enabled prediction provides breeders with the means to increase the number of genotypes that can be evaluated for selection. One of the major challenges in genome-enabled prediction is how to construct a training set of genotypes from a calibration set that represents the target population of genotypes, where the calibration set is composed of a training and validation set. A random sampling protocol of genotypes from the calibration set will lead to low quality coverage of the total genetic space by the training set when the calibration set contains population structure. As a consequence, predictive ability will be affected negatively, because some parts of the genotypic diversity in the target population will be under-represented in the training set, whereas other parts will be over-represented. Therefore, we propose a training set construction method that uniformly samples the genetic space spanned by the target population of genotypes, thereby increasing predictive ability. To evaluate our method, we constructed training sets alongside with the identification of corresponding genomic prediction models for four genotype panels that differed in the amount of population structure they contained (maize Flint, maize Dent, wheat, and rice). Training sets were constructed using uniform sampling, stratified-uniform sampling, stratified sampling and random sampling. We compared these methods with a method that maximizes the generalized coefficient of determination (CD). Several training set sizes were considered. We investigated four genomic prediction models: multi-locus QTL models, GBLUP models, combinations of QTL and GBLUPs, and Reproducing Kernel Hilbert Space (RKHS) models. For the maize and wheat panels, construction of the training set under uniform sampling led to a larger predictive ability than under stratified and random sampling. The results of our methods were similar to those of the CD method. For the rice panel, all training set construction methods led to similar predictive ability, a reflection of the very strong population structure in this panel. PMID:27672112

Eicosapentaenoic Acid Versus Docosahexaenoic Acid as Options for Vascular Risk Prevention: A Fish Story.

PubMed

Singh, Sarabjeet; Arora, Rohit R; Singh, Mukesh; Khosla, Sandeep

2016-01-01

Vascular inflammation is a key component involved in the process of arthrosclerosis, which in turn increases the risk for cardiovascular injury. In the last 10 years, there have been many trials that looked at omega-3 fatty acids as a way to reduce cardiovascular risk. These trials observed the effects of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) on the traditional lipid panel and found that both EPA and DHA reduce triglyceride (TG) level and increase high-density lipoprotein cholesterol (HDL-C) levels but also increase the low-density lipoprotein cholesterol (LDL-C) levels. In the 2 more recent trials, the MARINE and ANCHOR, EPA was given as an adjunct therapy to high-risk patients and not only was the traditional lipids measured but also examined the vascular inflammatory biomarkers. The results of these 2 trials not only showed reduction in cardiovascular risk because of reduction in vascular inflammation and reduction in the lipid panel but also showed that one of the MARINE-derived omega-3 fatty acid is superior to the other. Data search for omega-3 fatty acids and cardiovascular risk was performed, and articles were selected for review from 2006 to date. The research studies were all double-blind randomized trials except for one, which was a single-blind and focused on the effects of omega-3 fatty acids on the entire lipid panel. The participants received DHA/EPA and compared with a placebo group on the effect seen in the lipid panel. The first 7 studies looked at the effects of omega-3 fatty acids on TG, LDL-C, and HDL-C; of the 7, 1 directly compared DHA and EPA, 2 focused on EPA, and 4 were directed towards DHA alone. The MARINE and ANCHOR trials were more recent and also looked at the same parameter but also monitored vascular inflammatory biomarkers and how they were affected by omega-3 fatty acids. A second data search was performed for vascular biomarkers and cardiovascular risk, and articles that focused on high-sensitivity C-reactive protein and oxidized low-density lipoprotein were selected for review. Omega-3 fatty acids have shown to decrease TG level in multiple trials, but they have also shown to increase LDL and HDL levels, likely because omega-3 fatty acids promote TG conversion into HDL/LDL. The older data suggested that the benefits of omega-3 fatty acids are nullified by their effects on LDL levels. The data from the MARINE and ANCHOR trials have shown that EPA alone at 4 g per day has shown to decrease TG and total cholesterol without affecting the LDL levels. The earlier data showed that both EPA and DHA decreased TG level and increased levels of HDL-C, but that the DHA alone and direct comparison of DHA/EPA showed that DHA has more undesirable effects on LDL. Furthermore, the MARINE and ANCHOR trials have both shown that not only does EPA improve the lipid panel but also helps to decrease the levels of the vascular inflammatory biomarkers, thus further helping to decrease cardiovascular risk. The use of EPA as an adjunct therapy for high-risk patient has shown to help decrease cardiovascular risk. The reduction in risk is performed not only by decreasing TG but also by reducing vascular inflammation. Although because there are no randomized double-blind study looking at this, the research is inconclusive and requires further investigation.

Study of the damping characteristics of general aviation aircraft panels and development of computer programs to calculate the effectiveness of interior noise control treatment, part 1

NASA Technical Reports Server (NTRS)

Navaneethan, R.; Hunt, J.; Quayle, B.

1982-01-01

Tests were carried out on 20 inch x 20 inch panels at different test conditions using free-free panels, clamped panels, and panels as installed in the KU-FRL acoustic test facility. Tests with free-free panels verified the basic equipment set-up and test procedure. They also provided a basis for comparison. The results indicate that the effect of installed panels is to increase the damping ratio at the same frequency. However, a direct comparison is not possible, as the fundamental frequency of a free-free panel differs from the resonance frequency of the panel when installed. The damping values of panels installed in the test facility are closer to the damping values obtained with fixed-fixed panels. Effects of damping tape, stiffeners, and bonded and riveted edged conditions were also investigated. Progress in the development of a simple interior noise level control program is reported.

Messaging to Increase Public Support for Naloxone Distribution Policies in the United States: Results from a Randomized Survey Experiment.

PubMed

Bachhuber, Marcus A; McGinty, Emma E; Kennedy-Hendricks, Alene; Niederdeppe, Jeff; Barry, Colleen L

2015-01-01

Barriers to public support for naloxone distribution include lack of knowledge, concerns about potential unintended consequences, and lack of sympathy for people at risk of overdose. A randomized survey experiment was conducted with a nationally-representative web-based survey research panel (GfK KnowledgePanel). Participants were randomly assigned to read different messages alone or in combination: 1) factual information about naloxone; 2) pre-emptive refutation of potential concerns about naloxone distribution; and 3) a sympathetic narrative about a mother whose daughter died of an opioid overdose. Participants were then asked if they support or oppose policies related to naloxone distribution. For each policy item, logistic regression models were used to test the effect of each message exposure compared with the no-exposure control group. The final sample consisted of 1,598 participants (completion rate: 72.6%). Factual information and the sympathetic narrative alone each led to higher support for training first responders to use naloxone, providing naloxone to friends and family members of people using opioids, and passing laws to protect people who administer naloxone. Participants receiving the combination of the sympathetic narrative and factual information, compared to factual information alone, were more likely to support all policies: providing naloxone to friends and family members (OR: 2.0 [95% CI: 1.4 to 2.9]), training first responders to use naloxone (OR: 2.0 [95% CI: 1.2 to 3.4]), passing laws to protect people if they administer naloxone (OR: 1.5 [95% CI: 1.04 to 2.2]), and passing laws to protect people if they call for medical help for an overdose (OR: 1.7 [95% CI: 1.2 to 2.5]). All messages increased public support, but combining factual information and the sympathetic narrative was most effective. Public support for naloxone distribution can be improved through education and sympathetic portrayals of the population who stands to benefit from these policies.

Transcatheter Treatment of Hepatocellular Carcinoma with Doxorubicin-loaded DC Bead (DEBDOX): Technical Recommendations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lencioni, Riccardo, E-mail: riccardo.lencioni@med.unipi.it; Baere, Thierry de; Burrel, Marta

2012-10-15

Tranarterial chemoembolization (TACE) has been established by a meta-analysis of randomized controlled trials as the standard of care for nonsurgical patients with large or multinodular noninvasive hepatocellular carcinoma (HCC) isolated to the liver and with preserved liver function. Although conventional TACE with administration of an anticancer-in-oil emulsion followed by embolic agents has been the most popular technique, the introduction of embolic drug-eluting beads has provided an alternative to lipiodol-based regimens. Experimental studies have shown that TACE with drug-eluting beads has a safe pharmacokinetic profile and results in effective tumor killing in animal models. Early clinical experiences have confirmed that drug-elutingmore » beads provide a combined ischemic and cytotoxic effect locally with low systemic toxic exposure. Recently, the clinical value of a TACE protocol performed by using the embolic microsphere DC Bead loaded with doxorubicin (DEBDOX; drug-eluting bead doxorubicin) has been shown by randomized controlled trials. An important limitation of conventional TACE has been the inconsistency in the technique and the treatment schedules. This limitation has hampered the acceptance of TACE as a standard oncology treatment. Doxorubicin-loaded DC Bead provides levels of consistency and repeatability not available with conventional TACE and offers the opportunity to implement a standardized approach to HCC treatment. With this in mind, a panel of physicians took part in a consensus meeting held during the European Conference on Interventional Oncology in Florence, Italy, to develop a set of technical recommendations for the use of DEBDOX in HCC treatment. The conclusions of the expert panel are summarized.« less

Selection of population controls for a Salmonella case-control study in the UK using a market research panel and web-survey provides time and resource savings.

PubMed

Mook, P; Kanagarajah, S; Maguire, H; Adak, G K; Dabrera, G; Waldram, A; Freeman, R; Charlett, A; Oliver, I

2016-04-01

Timely recruitment of population controls in infectious disease outbreak investigations is challenging. We evaluated the timeliness and cost of using a market research panel as a sampling frame for recruiting controls in a case-control study during an outbreak of Salmonella Mikawasima in the UK in 2013. We deployed a web-survey by email to targeted members of a market research panel (panel controls) in parallel to the outbreak control team interviewing randomly selected public health staff by telephone and completing paper-based questionnaires (staff controls). Recruitment and completion of exposure history web-surveys for panel controls (n = 123) took 14 h compared to 15 days for staff controls (n = 82). The average staff-time cost per questionnaire for staff controls was £13·13 compared to an invoiced cost of £3·60 per panel control. Differences in the distribution of some exposures existed between these control groups but case-control studies using each group found that illness was associated with consumption of chicken outside of the home and chicken from local butchers. Recruiting market research panel controls offers time and resource savings. More rapid investigations would enable more prompt implementation of control measures. We recommend that this method of recruiting controls is considered in future investigations and assessed further to better understand strengths and limitations.

A randomized trial of fellowships for early career researchers finds a high reliability in funding decisions.

PubMed

Clarke, Philip; Herbert, Danielle; Graves, Nick; Barnett, Adrian G

2016-01-01

Funding for early career researchers in Australia's largest medical research funding scheme is determined by a competitive peer-review process using a panel of four reviewers. The purpose of this experiment was to appraise the reliability of funding by duplicating applications that were considered by separate grant review panels. Sixty duplicate applications were considered by two independent grant review panels that were awarding funding for Australia's National Health and Medical Research Council. Panel members were blinded to which applications were included in the experiment and to whether it was the original or duplicate application. Scores were compared across panels using Bland-Altman plots to determine measures of agreement, including whether agreement would have impacted on actual funding. Twenty-three percent of the applicants were funded by both panels and 60 percent were not funded by both, giving an overall agreement of 83 percent [95% confidence interval (CI): 73%, 92%]. The chance-adjusted agreement was 0.75 (95% CI: 0.58, 0.92). There was a comparatively high level of agreement when compared with other types of funding schemes. Further experimental research could be used to determine if this higher agreement is due to nature of the application, the composition of the assessment panel, or the characteristics of the applicants. Copyright © 2016 Elsevier Inc. All rights reserved.

Genetic Dissection of End-Use Quality Traits in Adapted Soft White Winter Wheat

PubMed Central

Jernigan, Kendra L.; Godoy, Jayfred V.; Huang, Meng; Zhou, Yao; Morris, Craig F.; Garland-Campbell, Kimberly A.; Zhang, Zhiwu; Carter, Arron H.

2018-01-01

Soft white wheat is used in domestic and foreign markets for various end products requiring specific quality profiles. Phenotyping for end-use quality traits can be costly, time-consuming and destructive in nature, so it is advantageous to use molecular markers to select experimental lines with superior traits. An association mapping panel of 469 soft white winter wheat cultivars and advanced generation breeding lines was developed from regional breeding programs in the U.S. Pacific Northwest. This panel was genotyped on a wheat-specific 90 K iSelect single nucleotide polymorphism (SNP) chip. A total of 15,229 high quality SNPs were selected and combined with best linear unbiased predictions (BLUPs) from historical phenotypic data of the genotypes in the panel. Genome-wide association mapping was conducted using the Fixed and random model Circulating Probability Unification (FarmCPU). A total of 105 significant marker-trait associations were detected across 19 chromosomes. Potentially new loci for total flour yield, lactic acid solvent retention capacity, flour sodium dodecyl sulfate sedimentation and flour swelling volume were also detected. Better understanding of the genetic factors impacting end-use quality enable breeders to more effectively discard poor quality germplasm and increase frequencies of favorable end-use quality alleles in their breeding populations. PMID:29593752

Acoustic Panel Liner for an Engine Nacelle

NASA Technical Reports Server (NTRS)

Nark, Douglas M. (Inventor); Ayle, Earl (Inventor); Jones, Michael G. (Inventor); Ichihashi, Fumitaka (Inventor)

2016-01-01

An acoustic panel liner includes a face sheet, back plate, and liner core positioned there-between, which may be used in an engine nacelle. Elongated chambers contain variable amounts of septa at a calibrated depth or depths. The septa may have varying DC flow resistance. The chambers may have a hexagonal or other polygonal cross sections. The septa, such as mesh caps, may be bonded to an inner wall of a corresponding chamber. The insertion depths may be the same or different. If different, the pattern of distribution of the depths may be randomized.

Prediction of response of aircraft panels subjected to acoustic and thermal loads

NASA Technical Reports Server (NTRS)

Mei, Chuh

1992-01-01

The primary effort of this research project has been focused on the development of analytical methods for the prediction of random response of structural panels subjected to combined and intense acoustic and thermal loads. The accomplishments on various acoustic fatigue research activities are described first, then followed by publications and theses. Topics covered include: transverse shear deformation; finite element models of vibrating composite laminates; large deflection vibration modeling; finite element analysis of thermal buckling; and prediction of three dimensional duct using boundary element method.

Design and fabrication of composite wing panels containing a production splice

NASA Technical Reports Server (NTRS)

Reed, D. L.

1975-01-01

Bolted specimens representative of both upper and lower wing surface splices of a transport aircraft were designed and manufactured for static and random load tension and compression fatigue testing including ground-air-ground load reversals. The specimens were fabricated with graphite-epoxy composite material. Multiple tests were conducted at various load levels and the results were used as input to a statistical wearout model. The statically designed specimens performed very well under highly magnified fatigue loadings. Two large panels, one tension and compression, were fabricated for testing by NASA-LRC.

The impact of alcohol taxation on liver cirrhosis mortality.

PubMed

Ponicki, William R; Gruenewald, Paul J

2006-11-01

The objective of this study is to investigate the impact of distilled spirits, wine, and beer taxes on cirrhosis mortality using a large-panel data set and statistical models that control for various other factors that may affect that mortality. The analyses were performed on a panel of 30 U.S. license states during the period 1971-1998 (N = 840 state-by-year observations). Exogenous measures included current and lagged versions of beverage taxes and income, as well as controls for states' age distribution, religion, race, health care availability, urbanity, tourism, and local bans on alcohol sales. Regression analyses were performed using random-effects models with corrections for serial autocorrelation and heteroscedasticity among states. Cirrhosis rates were found to be significantly related to taxes on distilled spirits but not to taxation of wine and beer. Consistent results were found using different statistical models and model specifications. Consistent with prior research, cirrhosis mortality in the United States appears more closely linked to consumption of distilled spirits than to that of other alcoholic beverages.

Benefit-Cost Analysis of a Randomized Evaluation of Communities That Care: Monetizing Intervention Effects on the Initiation of Delinquency and Substance Use Through Grade 12.

PubMed

Kuklinski, Margaret R; Fagan, Abigail A; Hawkins, J David; Briney, John S; Catalano, Richard F

2015-06-01

To determine whether the Communities That Care (CTC) prevention system is a cost-beneficial intervention. Data were from a longitudinal panel of 4,407 youth participating in a randomized controlled trial including 24 towns in 7 states, matched in pairs within state and randomly assigned to condition. Significant differences favoring intervention youth in sustained abstinence from delinquency, alcohol use, and tobacco use through Grade 12 were monetized and compared to economic investment in CTC. CTC was estimated to produce $4,477 in benefits per youth (discounted 2011 dollars). It cost $556 per youth to implement CTC for 5 years. The net present benefit was $3,920. The benefit-cost ratio was $8.22 per dollar invested. The internal rate of return was 21%. Risk that investment would exceed benefits was minimal. Investment was expected to be recouped within 9 years. Sensitivity analyses in which effects were halved yielded positive cost-beneficial results. CTC is a cost-beneficial, community-based approach to preventing initiation of delinquency, alcohol use, and tobacco use. CTC is estimated to generate economic benefits that exceed implementation costs when disseminated with fidelity in communities.

Panel Resource Management (PRM) Implementation and Effects within Safety Review Panel Settings and Dynamics

NASA Technical Reports Server (NTRS)

Taylor, Robert W.; Nash, Sally K.

2007-01-01

While technical training and advanced degree's assure proficiency at specific tasks within engineering disciplines, they fail to address the potential for communication breakdown and decision making errors familiar to multicultural environments where language barriers, intimidating personalities and interdisciplinary misconceptions exist. In an effort to minimize these pitfalls to effective panel review, NASA's lead safety engineers to the ISS Safety Review Panel (SRP), and Payload Safety Review Panel (PSRP) initiated training with their engineers, in conjunction with the panel chairs, and began a Panel Resource Management (PRM) program. The intent of this program focuses on the ability to reduce the barriers inhibiting effective participation from all panel attendees by bolstering participants confidence levels through increased communication skills, situational awareness, debriefing, and a better technical understanding of requirements and systems.

A Randomized Study Comparing Digital Imaging to Traditional Glass Slide Microscopy for Breast Biopsy and Cancer Diagnosis.

PubMed

Elmore, Joann G; Longton, Gary M; Pepe, Margaret S; Carney, Patricia A; Nelson, Heidi D; Allison, Kimberly H; Geller, Berta M; Onega, Tracy; Tosteson, Anna N A; Mercan, Ezgi; Shapiro, Linda G; Brunyé, Tad T; Morgan, Thomas R; Weaver, Donald L

2017-01-01

Digital whole slide imaging may be useful for obtaining second opinions and is used in many countries. However, the U.S. Food and Drug Administration requires verification studies. Pathologists were randomized to interpret one of four sets of breast biopsy cases during two phases, separated by ≥9 months, using glass slides or digital format (sixty cases per set, one slide per case, n = 240 cases). Accuracy was assessed by comparing interpretations to a consensus reference standard. Intraobserver reproducibility was assessed by comparing the agreement of interpretations on the same cases between two phases. Estimated probabilities of confirmation by a reference panel (i.e., predictive values) were obtained by incorporating data on the population prevalence of diagnoses. Sixty-five percent of responding pathologists were eligible, and 252 consented to randomization; 208 completed Phase I (115 glass, 93 digital); and 172 completed Phase II (86 glass, 86 digital). Accuracy was slightly higher using glass compared to digital format and varied by category: invasive carcinoma, 96% versus 93% ( P = 0.04); ductal carcinoma in situ (DCIS), 84% versus 79% ( P < 0.01); atypia, 48% versus 43% ( P = 0.08); and benign without atypia, 87% versus 82% ( P < 0.01). There was a small decrease in intraobserver agreement when the format changed compared to when glass slides were used in both phases ( P = 0.08). Predictive values for confirmation by a reference panel using glass versus digital were: invasive carcinoma, 98% and 97% (not significant [NS]); DCIS, 70% and 57% ( P = 0.007); atypia, 38% and 28% ( P = 0.002); and benign without atypia, 97% and 96% (NS). In this large randomized study, digital format interpretations were similar to glass slide interpretations of benign and invasive cancer cases. However, cases in the middle of the spectrum, where more inherent variability exists, may be more problematic in digital format. Future studies evaluating the effect these findings exert on clinical practice and patient outcomes are required.

Omni-Directional Viewing-Angle Switching through Control of the Beam Divergence Angle in a Liquid Crystal Panel

NASA Astrophysics Data System (ADS)

Baek, Jong-In; Kim, Ki-Han; Kim, Jae Chang; Yoon, Tae-Hoon

2010-01-01

This paper proposes a method of omni-directional viewing-angle switching by controlling the beam diverging angle (BDA) in a liquid crystal (LC) panel. The LCs aligned randomly by in-cell polymer structures diffuse the collimated backlight for the bright state of the wide viewing-angle mode. We align the LCs homogeneously by applying an in-plane field for the narrow viewing-angle mode. By doing this the scattering is significantly reduced so that the small BDA is maintained as it passes through the LC layer. The dark state can be obtained by aligning the LCs homeotropically with a vertical electric field. We demonstrated experimentally the omni-directional switching of the viewing-angle, without an additional panel or backlighting system.

Smartphone Mobile Application Delivering Personalized, Real-Time Sun Protection Advice: A Randomized Clinical Trial

PubMed Central

Buller, David B.; Berwick, Marianne; Lantz, Kathy; Buller, Mary Klein; Shane, James; Kane, Ilima; Liu, Xia

2014-01-01

Importance Mobile smart phones are rapidly emerging as an effective means of communicating with many Americans. Using mobile applications, they can access remote databases, track time and location, and integrate user input to provide tailored health information. Objective A smart phone mobile application providing personalized, real-time sun protection advice was evaluated in a randomized trial. Design The trial was conducted in 2012 and had a randomized pretest-posttest controlled design with a 10-week follow-up. Setting Data was collected from a nationwide population-based survey panel. Participants The trial enrolled a sample of n=604 non-Hispanic and Hispanic adults from the Knowledge Panel® aged 18 or older who owned an Android smart phone. Intervention The mobile application provided advice on sun protection (i.e., protection practices and risk of sunburn) and alerts (to apply/reapply sunscreen and get out of the sun), hourly UV Index, and vitamin D production based on the forecast UV Index, phone's time and location, and user input. Main Outcomes and Measures Percent of days using sun protection and time spent outdoors (days and minutes) in the midday sun and number of sunburns in the past 3 months were collected. Results Individuals in the treatment group reported more shade use but less sunscreen use than controls. Those who used the mobile app reported spending less time in the sun and using all protection behaviors combined more. Conclusions and Relevance The mobile application improved some sun protection. Use of the mobile application was lower than expected but associated with increased sun protection. Providing personalized advice when and where people are in the sun may help reduce sun exposure. PMID:25629710

A novel airlift photobioreactor with baffles for improved light utilization through the flashing light effect.

PubMed

Degen, J; Uebele, A; Retze, A; Schmid-Staiger, U; Trösch, W

2001-12-28

A newly developed flat panel airlift photobioreactor with a defined circulation path was tested for microalgal culture. The bioreactor exposed the cells to intermittent light to improve the efficiency of light utilization through the flashing-light effect. During batch cultures in the new photobioreactor, the biomass productivity of Chlorella vulgaris was 1.7 times greater than in a randomly mixed bubble column of identical dimension. A reduction in light path from 30 to 15 mm increased the biomass productivity by 2.5-fold. A maximum dry biomass productivity of 0.11 g l(-1) h(-1) was obtained at an artificial illumination of 980 mu E m(-2) s(-1).

The effect of air flow, panel curvature, and internal pressurization on field-incidence transmission loss. [acoustic propagation through aircraft fuselage

NASA Technical Reports Server (NTRS)

Koval, L. R.

1975-01-01

In the context of sound transmission through aircraft fuselage panels, equations for the field-incidence transmission loss (TL) of a single-walled panel are derived that include the effects of external air flow, panel curvature, and internal fuselage pressurization. These effects are incorporated into the classical equations for the TL of single panels, and the resulting double integral for field-incidence TL is numerically evaluated for a specific set of parameters.

Design of Fiber Reinforced Foam Sandwich Panels for Large Ares V Structural Applications

NASA Technical Reports Server (NTRS)

Bednarcyk, Brett A.; Arnold, Steven M.; Hopkins, Dale A.

2010-01-01

The preliminary design of three major structural components within NASA's Ares V heavy lift vehicle using a novel fiber reinforced foam composite sandwich panel concept is presented. The Ares V payload shroud, interstage, and core intertank are designed for minimum mass using this panel concept, which consists of integral composite webs separated by structural foam between two composite facesheets. The HyperSizer structural sizing software, in conjunction with NASTRAN finite element analyses, is used. However, since HyperSizer does not currently include a panel concept for fiber reinforced foam, the sizing was performed using two separate approaches. In the first, the panel core is treated as an effective (homogenized) material, whose properties are provided by the vendor. In the second approach, the panel is treated as a blade stiffened sandwich panel, with the mass of the foam added after completion of the panel sizing. Details of the sizing for each of the three Ares V components are given, and it is demonstrated that the two panel sizing approaches are in reasonable agreement for thinner panel designs, but as the panel thickness increases, the blade stiffened sandwich panel approach yields heavier panel designs. This is due to the effects of local buckling, which are not considered in the effective core property approach.

Comparison of Theory and Experiment on Aeroacoustic Loads and Deflections

NASA Astrophysics Data System (ADS)

Campos, L. M. B. C.; Bourgine, A.; Bonomi, B.

1999-01-01

The correlation of acoustic pressure loads induced by a turbulent wake on a nearby structural panel is considered: this problem is relevant to the acoustic fatigue of aircraft, rocket and satellite structures. Both the correlation of acoustic pressure loads and the panel deflections, were measured in an 8-m diameter transonic wind tunnel. Using the measured correlation of acoustic pressures, as an input to a finite-element aeroelastic code, the panel response was reproduced. The latter was also satisfactorily reproduced, using again the aeroelastic code, with input given by a theoretical formula for the correlation of acoustic pressures; the derivation of this formula, and the semi-empirical parameters which appear in it, are included in this paper. The comparison of acoustic responses in aeroacoustic wind tunnels (AWT) and progressive wave tubes (PWT) shows that much work needs to be done to bridge that gap; this is important since the PWT is the standard test means, whereas the AWT is more representative of real flight conditions but also more demanding in resources. Since this may be the first instance of successful modelling of acoustic fatigue, it may be appropriate to list briefly the essential ``positive'' features and associated physical phenomena: (i) a standard aeroelastic structural code can predict acoustic fatigue, provided that the correlation of pressure loads be adequately specified; (ii) the correlation of pressure loads is determined by the interference of acoustic waves, which depends on the exact evaluation of multiple scattering integrals, involving the statistics of random phase shifts; (iii) for the relatively low frequencies (one to a few hundred Hz) of aeroacoustic fatigue, the main cause of random phase effects is scattering by irregular wakes, which are thin on wavelength scale, and appear as partially reflecting rough interfaces. It may also be appropriate to mention some of the ``negative'' features, to which may be attached illusory importance; (iv) deterministic flow features, even conspicuous or of large scale, such as convection, are not relevant to aeroacoustic fatigue, because they do not produce random phase shifts; (v) local turbulence, of scale much smaller than the wavelength of sound, cannot produce significant random phase shifts, and is also of little consequence to aeroacoustic fatigue; (vi) the precise location of sound sources can become of little consequence, after multiple scattering gives rise to a diffuse sound field; and (vii) there is not much ground for distinction between unsteady flow and sound waves, since at transonic speeds they are both associated with pressures fluctuating in time and space.

Comparison of computer- and human-derived coronary angiographic end-point measures for controlled therapy trials

NASA Technical Reports Server (NTRS)

Mack, W. J.; Selzer, R. H.; Pogoda, J. M.; Lee, P. L.; Shircore, A. M.; Azen, S. P.; Blankenhorn, D. H.

1992-01-01

The Cholesterol Lowering Atherosclerosis Study, a randomized angiographic clinical trial, demonstrated the beneficial effect of niacin/colestipol plus diet therapy on coronary atherosclerosis. Outcome was determined by panel-based estimates (viewed in both still and cine modes) of percent stenosis severity and change in native artery and bypass graft lesions. Computer-based quantitative coronary angiography (QCA) was also used to measure lesion and bypass graft stenosis severity and change in individual frames closely matched in orientation, opacification, and cardiac phase. Both methods jointly evaluated 350 nonoccluded lesions. The correlation between QCA and panel estimates of lesion size was 0.70 (p less than 0.0001) and for change in lesion size was 0.28 (p = 0.002). Agreement between the two methods in classifying lesion changes (i.e., regression, unchanged, or progression) occurred for 60% (210 of 350) of the lesions kappa +/- SEM = 0.20 +/- 0.05, p less than 0.001). The panel identified 442 nonoccluded lesions for which QCA stenosis measurements could not be obtained. Lesions not measurable by QCA included those with stenosis greater than 85% that could not be reliably edge tracked, segments with diffuse or ecstatic disease that had no reliable reference diameter, and segments for which matched frames could not be located. Seventy-nine lesions, the majority between 21% and 40% stenosis, were identified and measured by QCA but were not identified by the panel. This comparison study demonstrates the need to consider available angiographic measurement methods in relation to the goals of their use.

78 FR 63551 - Self-Regulatory Organizations; NYSE MKT LLC; Notice of Filing and Immediate Effectiveness of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-24

... Panel, which would be renamed the CER Panel to distinguish it from the Obvious Error Panel (``OE Panel... to the Panel, which will be renamed the CER Panel to distinguish it from the Obvious Error Panel... respect to a transaction, the party can appeal that determination to the CER Panel within 30 minutes of...

PERFORMANCE ENHANCEMENT OF COMPRESSION MOLDED KENAF FIBER REINFORCED VINYL ESTER COMPOSITES THROUGH RESIN ADDITIVE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fifield, Leonard S.; Simmons, Kevin L.; Laddha, Sachin

2010-05-17

Plant-based bio-fiber has the potential to achieve weight and cost savings over glass fiber in automotive polymer composites if moisture stability and fiber-resin compatibility issues can be solved. This paper describes the compression molding of 50vol% 2 inch random nonwoven mat kenaf fiber vinyl ester composites with and without chemical resin additives intended to improve moisture stability and resin compatibility. The 2wt% addition of n-undecanoyl chloride or 10-undecenoyl chloride to the styrene-based resin prior to molding of the kenaf composites was observed to decrease the 24hr, 25oC moisture uptake of the molded panels by more than 50%. The tensile stiffnessmore » and flexural stiffness of the soaked panels containing these additives were seen to increase by more than 30% and 70%, respectively, relative to panels made with no additives. While ‘dry’ panel (50% relative humidity at 25oC) strengths did not significantly change in the presence of the additives, tensile strength was observed to increase by more than 40% and flexural strength more than doubled for the soaked panels.« less

Cryogenic performance of slotted brazed Rene 41 honeycomb panels

NASA Technical Reports Server (NTRS)

Hepler, A. K.; Swegle, A. R.

1982-01-01

Two brazed Rene 41 honeycomb panels that would incorporate a frame element were designed, fabricated and tested. The panels were representative of the lower surface of an advanced space transportation vehicle. The first panel was a two span panel supported by a center frame and on edges parallel to it. The second panel was a two span panel supported by a center frame and on edges parallel to it. The second panel was a three span panel supported on two frames and on edges parallel to the frames. Each panel had its outer skin slotted to reduce the thermal stresses of the panel skins. The first panel was tested under simulated boost conditions that included liquid hydrogen exposure of the frame and inner skin and radiant heat to 478K on the outer skins. The first panel was tested to investigate the effect of thermal stresses in skins and core caused by the panel being restrained by a cold integral frame and to observe the effects of frost formation and possible liquid air development in and around outer skin slots.

A novel strategy to increase separated electron-hole dipoles in commercial Si based solar panel to assist photovoltaic effect

NASA Astrophysics Data System (ADS)

Feng, Yefeng; He, Cheng-En; Xu, Zhichao; Hu, Jianbing; Peng, Cheng

2018-01-01

Interface induced polarization has been found to have a significant impact on dielectric properties of 2-2 type polymer composites bearing Si based semi-conducting ceramic sheets. Inherent overall polarity of polymer layers in 2-2 composites has been verified to be closely connected with interface effect and achieved permittivity in composites. In present work, conducting performances of monocrystalline Si sheets coated by varied high polarity material layers were deeply researched. The positive results inspired us to propose a novel strategy to improve separated electron-hole dipoles in commercial Si based solar cell panel for assisting photovoltaic effect, based on strong interface induced polarization. Conducting features of solar panels coated by two different high polarity polymer layers were detected to be greatly elevated compared with solar panel standalone, thanks to interface induced polarization between panel and polymer. Polymer coating with higher polarity would lead to more separated electron-hole dipole pairs in solar panel contributing to higher conductivity of panel. Valid synergy of interface effect and photovoltaic effect was based on their unidirectional traits of electron transfer. Dielectric properties of solar panels in composites further confirmed that strategy. This work might provide a facile route to prepare promising Si based solar panels with higher photoelectric conversion efficiency by enhancing interface induced polarization between panel and polymer coating.

Evaluating Alcoholics Anonymous's effect on drinking in Project MATCH using cross-lagged regression panel analysis.

PubMed

Magura, Stephen; Cleland, Charles M; Tonigan, J Scott

2013-05-01

The objective of the study is to determine whether Alcoholics Anonymous (AA) participation leads to reduced drinking and problems related to drinking within Project MATCH (Matching Alcoholism Treatments to Client Heterogeneity), an existing national alcoholism treatment data set. The method used is structural equation modeling of panel data with cross-lagged partial regression coefficients. The main advantage of this technique for the analysis of AA outcomes is that potential reciprocal causation between AA participation and drinking behavior can be explicitly modeled through the specification of finite causal lags. For the outpatient subsample (n = 952), the results strongly support the hypothesis that AA attendance leads to increases in alcohol abstinence and reduces drinking/ problems, whereas a causal effect in the reverse direction is unsupported. For the aftercare subsample (n = 774), the results are not as clear but also suggest that AA attendance leads to better outcomes. Although randomized controlled trials are the surest means of establishing causal relations between interventions and outcomes, such trials are rare in AA research for practical reasons. The current study successfully exploited the multiple data waves in Project MATCH to examine evidence of causality between AA participation and drinking outcomes. The study obtained unique statistical results supporting the effectiveness of AA primarily in the context of primary outpatient treatment for alcoholism.

Portraying mental illness and drug addiction as treatable health conditions: effects of a randomized experiment on stigma and discrimination.

PubMed

McGinty, Emma E; Goldman, Howard H; Pescosolido, Bernice; Barry, Colleen L

2015-02-01

Despite significant advances in treatment, stigma and discrimination toward persons with mental illness and drug addiction have remained constant in past decades. Prior work suggests that portraying other stigmatized health conditions (i.e., HIV/AIDS) as treatable can improve public attitudes toward those affected. Our study compared the effects of vignettes portraying persons with untreated and symptomatic versus successfully treated and asymptomatic mental illness and drug addiction on several dimensions of public attitudes about these conditions. We conducted a survey-embedded randomized experiment using a national sample (N = 3940) from an online panel. Respondents were randomly assigned to read one of ten vignettes. Vignette one was a control vignette, vignettes 2-5 portrayed individuals with untreated schizophrenia, depression, prescription pain medication addiction and heroin addiction, and vignettes 6-10 portrayed successfully treated individuals with the same conditions. After reading the randomly assigned vignette, respondents answered questions about their attitudes related to mental illness or drug addiction. Portrayals of untreated and symptomatic schizophrenia, depression, and heroin addiction heightened negative public attitudes toward persons with mental illness and drug addiction. In contrast, portrayals of successfully treated schizophrenia, prescription painkiller addiction, and heroin addiction led to less desire for social distance, greater belief in the effectiveness of treatment, and less willingness to discriminate against persons with these conditions. Portrayal of persons with successfully treated mental illness and drug addiction is a promising strategy for reducing stigma and discrimination toward persons with these conditions and improving public perceptions of treatment effectiveness. Copyright © 2014 Elsevier Ltd. All rights reserved.

Combined-load buckling behavior of metal-matrix composite sandwich panels under different thermal environments

NASA Technical Reports Server (NTRS)

Ko, William L.; Jackson, Raymond H.

1991-01-01

Combined compressive and shear buckling analysis was conducted on flat rectangular sandwich panels with the consideration of transverse shear effects of the core. The sandwich panel is fabricated with titanium honeycomb core and laminated metal matrix composite face sheets. The results show that the square panel has the highest combined load buckling strength, and that the buckling strength decreases sharply with the increases of both temperature and panel aspect ratio. The effect of layup (fiber orientation) on the buckling strength of the panels was studied in detail. The metal matrix composite sandwich panel was much more efficient than the sandwich panel with nonreinforced face sheets and had the same specific weight.

Effect of Spinal Manipulative Therapy on the Singing Voice.

PubMed

Fachinatto, Ana Paula A; Duprat, André de Campos; Silva, Marta Andrada E; Bracher, Eduardo Sawaya Botelho; Benedicto, Camila de Carvalho; Luz, Victor Botta Colangelo; Nogueira, Maruan Nogueira; Fonseca, Beatriz Suster Gomes

2015-09-01

This study investigated the effect of spinal manipulative therapy (SMT) on the singing voice of male individuals. Randomized, controlled, case-crossover trial. Twenty-nine subjects were selected among male members of the Heralds of the Gospel. This association was chosen because it is a group of persons with similar singing activities. Participants were randomly assigned to two groups: (A) chiropractic SMT procedure and (B) nontherapeutic transcutaneous electrical nerve stimulation (TENS) procedure. Recordings of the singing voice of each participant were taken immediately before and after the procedures. After a 14-day period, procedures were switched between groups: participants who underwent SMT on the first day were subjected to TENS and vice versa. Recordings were subjected to perceptual audio and acoustic evaluations. The same recording segment of each participant was selected. Perceptual audio evaluation was performed by a specialist panel (SP). Recordings of each participant were randomly presented thus making the SP blind to intervention type and recording session (before/after intervention). Recordings compiled in a randomized order were also subjected to acoustic evaluation. No differences in the quality of the singing on perceptual audio evaluation were observed between TENS and SMT. No differences in the quality of the singing voice of asymptomatic male singers were observed on perceptual audio evaluation or acoustic evaluation after a single spinal manipulative intervention of the thoracic and cervical spine. Copyright © 2015 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

A novel dual-marker expression panel for easy and accurate risk stratification of patients with gastric cancer.

PubMed

Kanda, Mitsuro; Murotani, Kenta; Tanaka, Haruyoshi; Miwa, Takashi; Umeda, Shinichi; Tanaka, Chie; Kobayashi, Daisuke; Hayashi, Masamichi; Hattori, Norifumi; Suenaga, Masaya; Yamada, Suguru; Nakayama, Goro; Fujiwara, Michitaka; Kodera, Yasuhiro

2018-05-07

Development of specific biomarkers is necessary for individualized management of patients with gastric cancer. The aim of this study was to design a simple expression panel comprising novel molecular markers for precise risk stratification. Patients (n = 200) who underwent gastrectomy for gastric cancer were randomly assigned into learning and validation sets. Tissue mRNA expression levels of 15 candidate molecular markers were determined using quantitative PCR analysis. A dual-marker expression panel was created according to concordance index (C-index) values of overall survival for all 105 combinations of two markers in the learning set. The reproducibility and clinical significance of the dual-marker expression panel were evaluated in the validation set. The patient characteristics of the learning and validation sets were well balanced. The C-index values of combinations were significantly higher compared with those of single markers. The panel with the highest C-index (0.718) of the learning set comprised SYT8 and MAGED2, which clearly stratified patients into low-, intermediate-, and high-risk groups. The reproducibility of the panel was demonstrated in the validation set. High expression scores were significantly associated with larger tumor size, vascular invasion, lymph node metastasis, peritoneal metastasis, and advanced disease. The dual-marker expression panel provides a simple tool that clearly stratifies patients with gastric cancer into low-, intermediate-, and high risk after gastrectomy. © 2018 The Authors. Cancer Medicine published by John Wiley & Sons Ltd.

Randomized study of placebo and framing information in direct-to-consumer print advertisements for prescription drugs.

PubMed

O'Donoghue, Amie C; Sullivan, Helen W; Aikin, Kathryn J

2014-12-01

Research suggests that quantitative information in direct-to-consumer (DTC) prescription drug ads may be helpful for consumers. The objective was to examine the effect of adding placebo rates and framing to DTC ads. In study 1, 2,000 Internet panel members with chronic pain participated in a randomized controlled experiment of DTC ads varying in placebo rate and framing. In study 2, 596 physicians ranked DTC ads varying in placebo rate and framing by how well they conveyed scientific information and their usefulness for patients. In study 1, participants who viewed placebo rates were able to recall them and use them to form certain perceptions. A mixed frame led to lower placebo rate recall and perceived efficacy. In study 2, overall, physicians preferred a placebo/single frame ad. Adding placebo rates to DTC ads may be useful for consumers. The evidence does not support using a mixed frame.

Effect of boundary conditions and panel geometry on the response of laminated panels subjected to transverse pressure loads

NASA Technical Reports Server (NTRS)

Jegley, Dawn C.

1993-01-01

The behavior of thin laminated flat and curved panels subjected to transverse pressure and inplane loads is considered. The effects of panel geometry, boundary conditions and laminate stacking sequence on the response of panels subjected to transverse pressure loads up to 12.4 N/sq cm is presented. The response of thin laminated panels is evaluated analytically and selected results are compared with test data. A parametric study of the deformation and strain responses of panels with radius of curvature ranging from 20 to 305 cm is presented. The combination of inplane tensile and pressure loads is also considered.

Numerical simulation of wind loads on solar panels

NASA Astrophysics Data System (ADS)

Su, Kao-Chun; Chung, Kung-Ming; Hsu, Shu-Tsung

2018-05-01

Solar panels mounted on the roof of a building or ground are often vulnerable to strong wind loads. This study aims to investigate wind loads on solar panels using computational fluid dynamic (CFD). The results show good agreement with wind tunnel data, e.g. the streamwise distribution of mean surface pressure coefficient of a solar panel. Wind uplift for solar panels with four aspect ratios is evaluated. The effect of inclined angle and clearance (or height) of a solar panel is addressed. It is found that wind uplift of a solar panel increases when there is an increase in inclined angle and the clearance above ground shows an opposite effect.

Impact of pre-imputation SNP-filtering on genotype imputation results

PubMed Central

2014-01-01

Background Imputation of partially missing or unobserved genotypes is an indispensable tool for SNP data analyses. However, research and understanding of the impact of initial SNP-data quality control on imputation results is still limited. In this paper, we aim to evaluate the effect of different strategies of pre-imputation quality filtering on the performance of the widely used imputation algorithms MaCH and IMPUTE. Results We considered three scenarios: imputation of partially missing genotypes with usage of an external reference panel, without usage of an external reference panel, as well as imputation of completely un-typed SNPs using an external reference panel. We first created various datasets applying different SNP quality filters and masking certain percentages of randomly selected high-quality SNPs. We imputed these SNPs and compared the results between the different filtering scenarios by using established and newly proposed measures of imputation quality. While the established measures assess certainty of imputation results, our newly proposed measures focus on the agreement with true genotypes. These measures showed that pre-imputation SNP-filtering might be detrimental regarding imputation quality. Moreover, the strongest drivers of imputation quality were in general the burden of missingness and the number of SNPs used for imputation. We also found that using a reference panel always improves imputation quality of partially missing genotypes. MaCH performed slightly better than IMPUTE2 in most of our scenarios. Again, these results were more pronounced when using our newly defined measures of imputation quality. Conclusion Even a moderate filtering has a detrimental effect on the imputation quality. Therefore little or no SNP filtering prior to imputation appears to be the best strategy for imputing small to moderately sized datasets. Our results also showed that for these datasets, MaCH performs slightly better than IMPUTE2 in most scenarios at the cost of increased computing time. PMID:25112433

Utilisation of preventative health check-ups in the UK: findings from individual-level repeated cross-sectional data from 1992 to 2008

PubMed Central

Labeit, Alexander; Peinemann, Frank; Baker, Richard

2013-01-01

Objectives To analyse and compare the determinants of screening uptake for different National Health Service (NHS) health check-ups in the UK. Design Individual-level analysis of repeated cross-sectional surveys with balanced panel data. Setting The UK. Participants Individuals taking part in the British Household Panel Survey (BHPS), 1992–2008. Outcome measure Uptake of NHS health check-ups for cervical cancer screening, breast cancer screening, blood pressure checks, cholesterol tests, dental screening and eyesight tests. Methods Dynamic panel data models (random effects panel probit with initial conditions). Results Having had a health check-up 1 year before, and previously in accordance with the recommended schedule, was associated with higher uptake of health check-ups. Individuals who visited a general practitioner (GP) had a significantly higher uptake in 5 of the 6 health check-ups. Uptake was highest in the recommended age group for breast and cervical cancer screening. For all health check-ups, age had a non-linear relationship. Lower self-rated health status was associated with increased uptake of blood pressure checks and cholesterol tests; smoking was associated with decreased uptake of 4 health check-ups. The effects of socioeconomic variables differed for the different health check-ups. Ethnicity did not have a significant influence on any health check-up. Permanent household income had an influence only on eyesight tests and dental screening. Conclusions Common determinants for having health check-ups are age, screening history and a GP visit. Policy interventions to increase uptake should consider the central role of the GP in promoting screening examinations and in preserving a high level of uptake. Possible economic barriers to access for prevention exist for dental screening and eyesight tests, and could be a target for policy intervention. Trial registration This observational study was not registered. PMID:24366576

Radiotherapy Breast Boost With Reduced Whole-Breast Dose Is Associated With Improved Cosmesis: The Results of a Comprehensive Assessment From the St. George and Wollongong Randomized Breast Boost Trial

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hau, Eric, E-mail: helloerico@yahoo.com; Browne, Lois H.; Khanna, Sam

Purpose: To evaluate comprehensively the effect of a radiotherapy boost on breast cosmetic outcomes after 5 years in patients treated with breast-conserving surgery. Methods: The St. George and Wollongong trial (NCT00138814) randomized 688 patients with histologically proven Tis-2, N 0-1, M0 carcinoma to the control arm of 50 Gy in 25 fractions (342 patients) and the boost arm of 45 Gy in 25 fractions to the whole breast followed by a 16 Gy in 8 fraction electron boost (346 patients). Five-year cosmetic outcomes were assessed by a panel subjectively in 385 patients and objectively using pBRA (relative breast retraction assessment).more » A subset of patients also had absolute BRA measurements. Clinician assessment and patient self-assessment of overall cosmetic and specific items as well as computer BCCT.core analysis were also performed. Results: The boost arm had improved cosmetic overall outcomes as scored by the panel and BCCT.core software with 79% (p = 0.016) and 81% (p = 0.004) excellent/good cosmesis respectively compared with 68% in no-boost arm. The boost arm also had lower pBRA and BRA values with a mean difference of 0.60 and 1.82 mm, respectively, but was not statistically significant. There was a very high proportion of overall excellent/good cosmetic outcome in 95% and 93% in the boost and no-boost arms using patient self-assessment. However, no difference in overall and specific items scored by clinician assessment and patient self-assessment was found. Conclusion: The results show the negative cosmetic effect of a 16-Gy boost is offset by a lower whole-breast dose of 45 Gy.« less

Algorithms for selecting informative marker panels for population assignment.

PubMed

Rosenberg, Noah A

2005-11-01

Given a set of potential source populations, genotypes of an individual of unknown origin at a collection of markers can be used to predict the correct source population of the individual. For improved efficiency, informative markers can be chosen from a larger set of markers to maximize the accuracy of this prediction. However, selecting the loci that are individually most informative does not necessarily produce the optimal panel. Here, using genotypes from eight species--carp, cat, chicken, dog, fly, grayling, human, and maize--this univariate accumulation procedure is compared to new multivariate "greedy" and "maximin" algorithms for choosing marker panels. The procedures generally suggest similar panels, although the greedy method often recommends inclusion of loci that are not chosen by the other algorithms. In seven of the eight species, when applied to five or more markers, all methods achieve at least 94% assignment accuracy on simulated individuals, with one species--dog--producing this level of accuracy with only three markers, and the eighth species--human--requiring approximately 13-16 markers. The new algorithms produce substantial improvements over use of randomly selected markers; where differences among the methods are noticeable, the greedy algorithm leads to slightly higher probabilities of correct assignment. Although none of the approaches necessarily chooses the panel with optimal performance, the algorithms all likely select panels with performance near enough to the maximum that they all are suitable for practical use.

78 FR 63555 - Self-Regulatory Organizations; NYSE Arca, Inc.; Notice of Filing and Immediate Effectiveness of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-24

... Catastrophic Error has occurred, subject to an appeal to the Panel, which would be renamed the CER Panel to... Panel, which will be renamed the CER Panel to distinguish it from the Obvious Error Panel (``OE Panel... transaction, the party can appeal that determination to the CER Panel within 30 minutes of receiving...

Safety, pharmacokinetics and pharmacodynamics of multiple oral doses of apixaban, a factor Xa inhibitor, in healthy subjects

PubMed Central

Frost, Charles; Nepal, Sunil; Wang, Jessie; Schuster, Alan; Byon, Wonkyung; Boyd, Rebecca A; Yu, Zhigang; Shenker, Andrew; Barrett, Yu Chen; Mosqueda-Garcia, Rogelio; LaCreta, Frank

2013-01-01

Aim Apixaban is an oral factor Xa inhibitor approved for stroke prevention in atrial fibrillation and thromboprophylaxis in patients who have undergone elective hip or knee replacement surgery and under development for treatment of venous thromboembolism. This study examined the safety, pharmacokinetics and pharmacodynamics of multiple dose apixaban. Method This double-blind, randomized, placebo-controlled, parallel group, multiple dose escalation study was conducted in six sequential dose panels – apixaban 2.5, 5, 10 and 25 mg twice daily and 10 and 25 mg once daily– with eight healthy subjects per panel. Within each panel, subjects were randomized (3:1) to oral apixaban or placebo for 7 days. Subjects underwent safety assessments and were monitored for adverse events (AEs). Blood samples were taken to measure apixaban plasma concentration, international normalized ratio (INR), activated partial thromboplastin time (aPTT) and modified prothrombin time (mPT). Results Forty-eight subjects were randomized and treated (apixaban, n = 36; placebo, n = 12); one subject receiving 2.5 mg twice daily discontinued due to AEs (headache and nausea). No dose limiting AEs were observed. Apixaban maximum plasma concentration was achieved ∼3 h post-dose. Exposure increased approximately in proportion to dose. Apixaban steady-state concentrations were reached by day 3, with an accumulation index of 1.3–1.9. Peak : trough ratios were lower for twice daily vs. once daily regimens. Clotting times showed dose-related increases tracking the plasma concentration–time profile. Conclusion Multiple oral doses of apixaban were safe and well tolerated over a 10-fold dose range, with pharmacokinetics with low variability and concentration-related increases in clotting time measures. PMID:23451769

Slow-wave metamaterial open panels for efficient reduction of low-frequency sound transmission

NASA Astrophysics Data System (ADS)

Yang, Jieun; Lee, Joong Seok; Lee, Hyeong Rae; Kang, Yeon June; Kim, Yoon Young

2018-02-01

Sound transmission reduction is typically governed by the mass law, requiring thicker panels to handle lower frequencies. When open holes must be inserted in panels for heat transfer, ventilation, or other purposes, the efficient reduction of sound transmission through holey panels becomes difficult, especially in the low-frequency ranges. Here, we propose slow-wave metamaterial open panels that can dramatically lower the working frequencies of sound transmission loss. Global resonances originating from slow waves realized by multiply inserted, elaborately designed subwavelength rigid partitions between two thin holey plates contribute to sound transmission reductions at lower frequencies. Owing to the dispersive characteristics of the present metamaterial panels, local resonances that trap sound in the partitions also occur at higher frequencies, exhibiting negative effective bulk moduli and zero effective velocities. As a result, low-frequency broadened sound transmission reduction is realized efficiently in the present metamaterial panels. The theoretical model of the proposed metamaterial open panels is derived using an effective medium approach and verified by numerical and experimental investigations.

78 FR 65660 - Medicare Program; Solicitation of Five Nominations to the Advisory Panel on Hospital Outpatient...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-01

... Payment (HOP, the Panel). There are five vacancies on the Panel effective September 30, 2013. The purpose... services. The Secretary rechartered the Panel in 2012 for a 2-year period effective through November [email protected] or call (410) 786-3985. News Media: Representatives should contact the CMS Press Office at...

Glass/Epoxy Door Panel for Automobiles

NASA Technical Reports Server (NTRS)

Bauer, J. L. JR.

1985-01-01

Lightweight panel cost-effective. Integrally-molded intrusion strap key feature of composite outer door panel. Strap replaces bulky and heavy steel instrusion beam of conventional door. Standard steel inner panel used for demonstration purposes. Door redesigned to exploit advantages of composite outer panel thinner. Outer panel for automobilie door, made of glass/epoxy composite material, lighter than conventional steel door panel, meets same strength requirements, and less expensive.

Gold standards and expert panels: a pulmonary nodule case study with challenges and solutions

NASA Astrophysics Data System (ADS)

Miller, Dave P.; O'Shaughnessy, Kathryn F.; Wood, Susan A.; Castellino, Ronald A.

2004-05-01

Comparative evaluations of reader performance using different modalities, e.g. CT with computer-aided detection (CAD) vs. CT without CAD, generally require a "truth" definition based on a gold standard. There are many situations in which a true invariant gold standard is impractical or impossible to obtain. For instance, small pulmonary nodules are generally not assessed by biopsy or resection. In such cases, it is common to use a unanimous consensus or majority agreement from an expert panel as a reference standard for actionability in lieu of the unknown gold standard for disease. Nonetheless, there are three major concerns about expert panel reference standards: (1) actionability is not synonymous with disease (2) it may be possible to obtain different conclusions about which modality is better using different rules (e.g. majority vs. unanimous consensus), and (3) the variability associated with the panelists is not formally captured in the p-values or confidence intervals that are generally produced for estimating the extent to which one modality is superior to the other. A multi-reader-multi-case (MRMC) receiver operating characteristic (ROC) study was performed using 90 cases, 15 readers, and a reference truth based on 3 experienced panelists. The primary analyses were conducted using a reference truth of unanimous consensus regarding actionability (3 out of 3 panelists). To assess the three concerns noted above: (1) additional data from the original radiology reports were compared to the panel (2) the complete analysis was repeated using different definitions of truth, and (3) bootstrap analyses were conducted in which new truth panels were constructed by picking 1, 2, or 3 panelists at random. The definition of the reference truth affected the results for each modality (CT with CAD and CT without CAD) considered by itself, but the effects were similar, so the primary analysis comparing the modalities was robust to the choice of the reference truth.

Evaluation of a Serum Lung Cancer Biomarker Panel.

PubMed

Mazzone, Peter J; Wang, Xiao-Feng; Han, Xiaozhen; Choi, Humberto; Seeley, Meredith; Scherer, Richard; Doseeva, Victoria

2018-01-01

A panel of 3 serum proteins and 1 autoantibody has been developed to assist with the detection of lung cancer. We aimed to validate the accuracy of the biomarker panel in an independent test set and explore the impact of adding a fourth serum protein to the panel, as well as the impact of combining molecular and clinical variables. The training set of serum samples was purchased from commercially available biorepositories. The testing set was from a biorepository at the Cleveland Clinic. All lung cancer and control subjects were >50 years old and had smoked a minimum of 20 pack-years. A panel of biomarkers including CEA (carcinoembryonic antigen), CYFRA21-1 (cytokeratin-19 fragment 21-1), CA125 (carbohydrate antigen 125), HGF (hepatocyte growth factor), and NY-ESO-1 (New York esophageal cancer-1 antibody) was measured using immunoassay techniques. The multiple of the median method, multivariate logistic regression, and random forest modeling was used to analyze the results. The training set consisted of 604 patient samples (268 with lung cancer and 336 controls) and the testing set of 400 patient samples (155 with lung cancer and 245 controls). With a threshold established from the training set, the sensitivity and specificity of both the 4- and 5-biomarker panels on the testing set was 49% and 96%, respectively. Models built on the testing set using only clinical variables had an area under the receiver operating characteristic curve of 0.68, using the biomarker panel 0.81 and by combining clinical and biomarker variables 0.86. This study validates the accuracy of a panel of proteins and an autoantibody in a population relevant to lung cancer detection and suggests a benefit to combining clinical features with the biomarker results.

Evaluation of a Serum Lung Cancer Biomarker Panel

PubMed Central

Mazzone, Peter J; Wang, Xiao-Feng; Han, Xiaozhen; Choi, Humberto; Seeley, Meredith; Scherer, Richard; Doseeva, Victoria

2018-01-01

Background: A panel of 3 serum proteins and 1 autoantibody has been developed to assist with the detection of lung cancer. We aimed to validate the accuracy of the biomarker panel in an independent test set and explore the impact of adding a fourth serum protein to the panel, as well as the impact of combining molecular and clinical variables. Methods: The training set of serum samples was purchased from commercially available biorepositories. The testing set was from a biorepository at the Cleveland Clinic. All lung cancer and control subjects were >50 years old and had smoked a minimum of 20 pack-years. A panel of biomarkers including CEA (carcinoembryonic antigen), CYFRA21-1 (cytokeratin-19 fragment 21-1), CA125 (carbohydrate antigen 125), HGF (hepatocyte growth factor), and NY-ESO-1 (New York esophageal cancer-1 antibody) was measured using immunoassay techniques. The multiple of the median method, multivariate logistic regression, and random forest modeling was used to analyze the results. Results: The training set consisted of 604 patient samples (268 with lung cancer and 336 controls) and the testing set of 400 patient samples (155 with lung cancer and 245 controls). With a threshold established from the training set, the sensitivity and specificity of both the 4- and 5-biomarker panels on the testing set was 49% and 96%, respectively. Models built on the testing set using only clinical variables had an area under the receiver operating characteristic curve of 0.68, using the biomarker panel 0.81 and by combining clinical and biomarker variables 0.86. Conclusions: This study validates the accuracy of a panel of proteins and an autoantibody in a population relevant to lung cancer detection and suggests a benefit to combining clinical features with the biomarker results. PMID:29371783

Social capital and health-purely a question of context?

PubMed

Giordano, Giuseppe Nicola; Ohlsson, Henrik; Lindström, Martin

2011-07-01

Debate still surrounds which level of analysis (individual vs. contextual) is most appropriate to investigate the effects of social capital on health. Applying multilevel ecometric analyses to British Household Panel Survey data, we estimated fixed and random effects between five individual-, household- and small area-level social capital indicators and general health. We further compared the variance in health attributable to each level using intraclass correlations. Our results demonstrate that association between social capital and health depends on indicator type and level investigated, with one quarter of total individual-level health variance found at the household level. However, individual-level social capital variables and other health determinants appear to influence contextual-level variance the most. Copyright © 2011 Elsevier Ltd. All rights reserved.

Size Effects in Impact Damage of Composite Sandwich Panels

NASA Technical Reports Server (NTRS)

Dobyns, Alan; Jackson, Wade

2003-01-01

Panel size has a large effect on the impact response and resultant damage level of honeycomb sandwich panels. It has been observed during impact testing that panels of the same design but different panel sizes will show large differences in damage when impacted with the same impact energy. To study this effect, a test program was conducted with instrumented impact testing of three different sizes of sandwich panels to obtain data on panel response and residual damage. In concert with the test program. a closed form analysis method was developed that incorporates the effects of damage on the impact response. This analysis method will predict both the impact response and the residual damage of a simply-supported sandwich panel impacted at any position on the panel. The damage is incorporated by the use of an experimental load-indentation curve obtained for the face-sheet/honeycomb and indentor combination under study. This curve inherently includes the damage response and can be obtained quasi-statically from a rigidly-backed specimen or a specimen with any support conditions. Good correlation has been obtained between the test data and the analysis results for the maximum force and residual indentation. The predictions can be improved by using a dynamic indentation curve. Analyses have also been done using the MSC/DYTRAN finite element code.

Improving Strength of Postbuckled Panels Through Stitching

NASA Technical Reports Server (NTRS)

Jegley, Dawn C.

2007-01-01

The behavior of blade-stiffened graphite-epoxy panels with impact damage is examined to determine the effect of adding through-the-thickness stitches in the stiffener flange-to-skin interface. The influence of stitches is evaluated by examining buckling and failure for panels with failure loads up to 3.5 times greater than buckling loads. Analytical and experimental results from four configurations of panel specimens are presented. For each configuration, two panels were manufactured with skin and flanges held together with through-the-thickness stitches introduced prior to resin infusion and curing and one panel was manufactured with no stitches holding the flange to the skin. No mechanical fasteners were used for the assembly of any of these panels. Panels with and without low-speed impact damage were loaded to failure in compression. Buckling and failure modes are discussed. Stitching had little effect on buckling loads but increased the failure loads of impact-damaged panels by up to 30%.

Random parameter models of interstate crash frequencies by severity, number of vehicles involved, collision and location type.

PubMed

Venkataraman, Narayan; Ulfarsson, Gudmundur F; Shankar, Venky N

2013-10-01

A nine-year (1999-2007) continuous panel of crash histories on interstates in Washington State, USA, was used to estimate random parameter negative binomial (RPNB) models for various aggregations of crashes. A total of 21 different models were assessed in terms of four ways to aggregate crashes, by: (a) severity, (b) number of vehicles involved, (c) crash type, and by (d) location characteristics. The models within these aggregations include specifications for all severities (property damage only, possible injury, evident injury, disabling injury, and fatality), number of vehicles involved (one-vehicle to five-or-more-vehicle), crash type (sideswipe, same direction, overturn, head-on, fixed object, rear-end, and other), and location types (urban interchange, rural interchange, urban non-interchange, rural non-interchange). A total of 1153 directional road segments comprising of the seven Washington State interstates were analyzed, yielding statistical models of crash frequency based on 10,377 observations. These results suggest that in general there was a significant improvement in log-likelihood when using RPNB compared to a fixed parameter negative binomial baseline model. Heterogeneity effects are most noticeable for lighting type, road curvature, and traffic volume (ADT). Median lighting or right-side lighting are linked to increased crash frequencies in many models for more than half of the road segments compared to both-sides lighting. Both-sides lighting thereby appears to generally lead to a safety improvement. Traffic volume has a random parameter but the effect is always toward increasing crash frequencies as expected. However that the effect is random shows that the effect of traffic volume on crash frequency is complex and varies by road segment. The number of lanes has a random parameter effect only in the interchange type models. The results show that road segment-specific insights into crash frequency occurrence can lead to improved design policy and project prioritization. Copyright © 2013 Elsevier Ltd. All rights reserved.

Benefit-Cost Analysis of a Randomized Evaluation of Communities That Care: Monetizing Intervention Effects on the Initiation of Delinquency and Substance Use Through Grade 12

PubMed Central

Kuklinski, Margaret R.; Fagan, Abigail A.; Hawkins, J. David; Briney, John S.; Catalano, Richard F.

2015-01-01

Objective To determine whether the Communities That Care (CTC) prevention system is a cost-beneficial intervention. Methods Data were from a longitudinal panel of 4,407 youth participating in a randomized controlled trial including 24 towns in 7 states, matched in pairs within state and randomly assigned to condition. Significant differences favoring intervention youth in sustained abstinence from delinquency, alcohol use, and tobacco use through Grade 12 were monetized and compared to economic investment in CTC. Results CTC was estimated to produce $4,477 in benefits per youth (discounted 2011 dollars). It cost $556 per youth to implement CTC for 5 years. The net present benefit was $3,920. The benefit-cost ratio was $8.22 per dollar invested. The internal rate of return was 21%. Risk that investment would exceed benefits was minimal. Investment was expected to be recouped within 9 years. Sensitivity analyses in which effects were halved yielded positive cost-beneficial results. Conclusions CTC is a cost-beneficial, community-based approach to preventing initiation of delinquency, alcohol use, and tobacco use. CTC is estimated to generate economic benefits that exceed implementation costs when disseminated with fidelity in communities. PMID:26213527

Modeling the Effects of Solar Cell Distribution on Optical Cross Section for Solar Panel Simulation

DTIC Science & Technology

2012-09-01

cell material. The solar panel was created as a CAD model and simulated with the imaging facility parameters with TASAT. TASAT uses a BRDF to apply...1 MODELING THE EFFECTS OF SOLAR CELL DISTRIBUTION ON OPTICAL CROSS SECTION FOR SOLAR PANEL SIMULATION Kelly Feirstine Meiling Klein... model of a solar panel with various solar cell tip and tilt distribution statistics. Modeling a solar panel as a single sheet of “solar cell” material

Flutter Research on Skin Panels

NASA Technical Reports Server (NTRS)

Kordes, Eldon E.; Tuovila, Weimer J.; Guy, Lawrence D.

1960-01-01

Representative experimental results are presented to show the current status of the panel flutter problem. Results are presented for unstiffened rectangular panels and for rectangular panels stiffened by corrugated backing. Flutter boundaries are established for all types of panels when considered on the basis of equivalent isotropic plates. The effects of Mach number, differential pressure, and aerodynamic heating on panel flutter are discussed. A flutter analysis of orthotropic panels is presented in the appendix.

Response of moderately thick laminated cross-ply composite shells subjected to random excitation

NASA Technical Reports Server (NTRS)

Elishakoff, Isaak; Cederbaum, Gabriel; Librescu, Liviu

1989-01-01

This study deals with the dynamic response of transverse shear deformable laminated shells subjected to random excitation. The analysis encompasses the following problems: (1) the dynamic response of circular cylindrical shells of finite length excited by an axisymmetric uniform ring loading, stationary in time, and (2) the response of spherical and cylindrical panels subjected to stationary random loadings with uniform spatial distribution. The associated equations governing the structural theory of shells are derived upon discarding the classical Love-Kirchhoff (L-K) assumptions. In this sense, the theory is formulated in the framework of the first-order transverse shear deformation theory (FSDT).

Environmental effects of ozone depletion, UV radiation and interactions with climate change: UNEP Environmental Effects Assessment Panel, update 2017

EPA Science Inventory

The Environmental Effects Assessment Panel (EEAP) is one of three Panels of experts that inform the Parties to the Montreal Protocol. The EEAP focuses on the effects of UV radiation on human health, terrestrial and aquatic ecosystems, air quality, and materials, as well as on the...

Cardiovascular risk reduction in high-risk pediatric patients: a scientific statement from the American Heart Association Expert Panel on Population and Prevention Science; the Councils on Cardiovascular Disease in the Young, Epidemiology and Prevention, Nutrition, Physical Activity and Metabolism, High Blood Pressure Research, Cardiovascular Nursing, and the Kidney in Heart Disease; and the Interdisciplinary Working Group on Quality of Care and Outcomes Research.

PubMed

Kavey, Rae-Ellen W; Allada, Vivek; Daniels, Stephen R; Hayman, Laura L; McCrindle, Brian W; Newburger, Jane W; Parekh, Rulan S; Steinberger, Julia

2007-01-01

Although for most children the process of atherosclerosis is subclinical, dramatically accelerated atherosclerosis occurs in some pediatric disease states, with clinical coronary events occurring in childhood and very early adult life. As with most scientific statements about children and the future risk for cardiovascular disease, there are no randomized trials documenting the effects of risk reduction on hard clinical outcomes. A growing body of literature, however, identifies the importance of premature cardiovascular disease in the course of certain pediatric diagnoses and addresses the response to risk factor reduction. For this scientific statement, a panel of experts reviewed what is known about very premature cardiovascular disease in 8 high-risk pediatric diagnoses and, from the science base, developed practical recommendations for management of cardiovascular risk.

The effects of design details on cost and weight of fuselage structures

NASA Technical Reports Server (NTRS)

Swanson, G. D.; Metschan, S. L.; Morris, M. R.; Kassapoglou, C.

1993-01-01

Crown panel design studies showing the relationship between panel size, cost, weight, and aircraft configuration are compared to aluminum design configurations. The effects of a stiffened sandwich design concept are also discussed. This paper summarizes the effect of a design cost model in assessing the cost and weight relationships for fuselage crown panel designs. Studies were performed using data from existing aircraft to assess the effects of different design variables on the cost and weight of transport fuselage crown panel design. Results show a strong influence of load levels, panel size, and material choices on the cost and weight of specific designs. A design tool being developed under the NASA ACT program is used in the study to assess these issues. The effects of panel configuration comparing postbuckled and buckle resistant stiffened laminated structure is compared to a stiffened sandwich concept. Results suggest some potential economy with stiffened sandwich designs for compression dominated structure with relatively high load levels.

Escitalopram is Associated with Reductions in Pain Severity and Pain Interference in Opioid Dependent Patients with Depressive Symptoms

PubMed Central

Tsui, Judith I.; Herman, Debra S.; Kettavong, Malyna; Anderson, Bradley J.; Stein, Michael D.

2011-01-01

Pain is common among opioid dependent patients, yet pharmacologic strategies are limited. The aim of this study was to explore whether escitalopram, a selective serotonin reuptake inhibitor, was associated with reductions in pain. The study used longitudinal data from a randomized, controlled trial that evaluated the effects of escitalopram on treatment retention in patients with depressive symptoms who were initiating buprenorphine/naloxone for treatment of opioid dependence. Participants were randomized to take escitalopram 10mg or placebo daily. Changes in pain severity, pain interference and depression were assessed at 1, 2 and 3 months visits using the Visual Analog Scale, Brief Pain Inventory and the Beck Depression Inventory II, respectively. Fixed-effects estimator for panel regression models were used to assess the effects of intervention on changes in outcomes over time. Additional models were estimated to explore whether the intervention effect was mediated by within-person changes in depression. In this sample of 147 adults, we found that participants randomized to escitalopram had significantly larger reductions on both pain severity (b = −14.34, t = −2.66, p < .01) and pain interference (b = −1.20, t = −2.23, p < .05) between baseline and follow-up. After adjusting for within-subject changes in depression, the estimated effects of escitalopram on pain severity and pain interference were virtually identical to the unadjusted effects. In summary, this study of opioid-dependent patients with depressive symptoms found that treatment with escitalopram was associated with clinically meaningful reductions in pain severity and pain interference during the first three months of therapy. PMID:21924552

Attic Retrofits Using Nail-Base Insulated Panels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mallay, David; Kochkin, Vladimir

This project developed and demonstrated a roof/attic energy retrofit solution using nail-base insulated panels for existing homes where traditional attic insulation approaches are not effective or feasible. Nail-base insulated panels (retrofit panels) consist of rigid foam insulation laminated to one face of a wood structural panel. The prefabricated panels are installed above the existing roof deck during a reroofing effort.

Design guide for predicting nonlinear random response (including snap-through) of buckled plates

NASA Technical Reports Server (NTRS)

Ng, Chung Fai

1989-01-01

This design guide describes a method for predicting the random response of flat and curved plates which is based on theoretical analyses and experimental results. The plate curvature can be due to postbuckling, in-plane mechanical or thermal stresses. Based on a single mode formula, root mean square values of the strain response to broadband excitation are evaluated for different static buckled configurations using the equivalent linearization technique. The effects on the overall strain response due to instability motion of snap-through are included. Panel parameters include clamped and simply-supported boundaries, aspect ratio, thickness and length. Analytical results are compared with experimental results from tests with 12 in. x 15 in. aluminum plates under thermal loading in a progressive wave facility. Comparisons are also made with results from tests with a 2 in. x 15 in. x 0.032 in. aluminum beam under base mechanical excitation. The comparisons help to assess the accuracy of the theory and the conditions under which deviations from the theory due to effects of imperfection and higher modes are significant.

Aircraft interior noise reduction by alternate resonance tuning

NASA Technical Reports Server (NTRS)

Gottwald, James A.; Bliss, Donald B.

1990-01-01

The focus is on a noise control method which considers aircraft fuselages lined with panels alternately tuned to frequencies above and below the frequency that must be attenuated. An interior noise reduction called alternate resonance tuning (ART) is described both theoretically and experimentally. Problems dealing with tuning single paneled wall structures for optimum noise reduction using the ART methodology are presented, and three theoretical problems are analyzed. The first analysis is a three dimensional, full acoustic solution for tuning a panel wall composed of repeating sections with four different panel tunings within that section, where the panels are modeled as idealized spring-mass-damper systems. The second analysis is a two dimensional, full acoustic solution for a panel geometry influenced by the effect of a propagating external pressure field such as that which might be associated with propeller passage by a fuselage. To reduce the analysis complexity, idealized spring-mass-damper panels are again employed. The final theoretical analysis presents the general four panel problem with real panel sections, where the effect of higher structural modes is discussed. Results from an experimental program highlight real applications of the ART concept and show the effectiveness of the tuning on real structures.

Effects of Tangential Edge Constraints on the Postbuckling Behavior of Flat and Curved Panels Subjected to Thermal and Mechanical Loads

NASA Technical Reports Server (NTRS)

Lin, W.; Librescu, L.; Nemeth, M. P.; Starnes, J. H. , Jr.

1994-01-01

A parametric study of the effects of tangential edge constraints on the postbuckling response of flat and shallow curved panels subjected to thermal and mechanical loads is presented. The mechanical loads investigated are uniform compressive edge loads and transverse lateral pressure. The temperature fields considered are associated with spatially nonuniform heating over the panels, and a linear through-the-thickness temperature gradient. The structural model is based on a higher-order transverse-shear-deformation theory of shallow shells that incorporates the effects of geometric nonlinearities, initial geometric imperfections, and tangential edge motion constraints. Results are presented for three-layer sandwich panels made from transversely isotropic materials. Simply supported panels are considered in which the tangential motion of the unloaded edges is either unrestrained, partially restrained, or fully restrained. These results focus on the effects of the tangential edge restraint on the postbuckling response. The results of this study indicate that tangentially restraining the edges of a curved panel can make the panel insensitive to initial geometric imperfections in some cases.

Active structural acoustic control of noise transmission through double panel systems

NASA Astrophysics Data System (ADS)

Carneal, James P.; Fuller, Chris R.

1995-04-01

A preliminary parametric study of active control of sound transmission through double panel systems has been experimentally performed. The technique used is the active structural acoustic control (ASAC) approach where control inputs, in the form of piezoelectric actuators, were applied to the structure while the radiated pressure field was minimized. Results indicate the application of control inputs to the radiating panel resulted in greater transmission loss due to its direct effect on the nature of the structural-acoustic coupling between the radiating panel and the receiving chamber. Increased control performance was seen in a double panel system consisting of a stiffer radiating panel with a lower modal density. As expected, more effective control of a radiating panel excited on-resonance is achieved over one excited off-resonance. In general, the results validate the ASAC approach for double panel systems and demonstrate that it is possible to take advantage of double panel behavior to enhance control performance, although it is clear that further research must be done to understand the physics involved.

16 CFR 502.2 - Terms defined.

Code of Federal Regulations, 2010 CFR

2010-01-01

... market or trade area for a reasonably substantial period of time, i.e., a 30-day period. For consumer..., package, label, person, commerce, principal display panel, and random package have the same meaning as... person engaged in the packaging or labeling of any consumer commodity for distribution in commerce or any...

78 FR 53429 - Response Systems to Adult Sexual Assault Crimes Panel (Response Systems Panel); Notice of Federal...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-29

... recommendations regarding how to improve the effectiveness of such systems. The Panel is interested in written and... DEPARTMENT OF DEFENSE Office of the Secretary Response Systems to Adult Sexual Assault Crimes Panel (Response Systems Panel); Notice of Federal Advisory Committee Meeting AGENCY: Department of...

Description of Panel Method Code ANTARES

NASA Technical Reports Server (NTRS)

Ulbrich, Norbert; George, Mike (Technical Monitor)

2000-01-01

Panel method code ANTARES was developed to compute wall interference corrections in a rectangular wind tunnel. The code uses point doublets to represent blockage effects and line doublets to represent lifting effects of a wind tunnel model. Subsonic compressibility effects are modeled by applying the Prandtl-Glauert transformation. The closed wall, open jet, or perforated wall boundary condition may be assigned to a wall panel centroid. The tunnel walls can be represented by using up to 8000 panels. The accuracy of panel method code ANTARES was successfully investigated by comparing solutions for the closed wall and open jet boundary condition with corresponding Method of Images solutions. Fourier transform solutions of a two-dimensional wind tunnel flow field were used to check the application of the perforated wall boundary condition. Studies showed that the accuracy of panel method code ANTARES can be improved by increasing the total number of wall panels in the circumferential direction. It was also shown that the accuracy decreases with increasing free-stream Mach number of the wind tunnel flow field.

A blessing and a curse? Political institutions in the growth and decay of generalized trust: a cross-national panel analysis, 1980-2009.

PubMed

Robbins, Blaine G

2012-01-01

Despite decades of research on social capital, studies that explore the relationship between political institutions and generalized trust-a key element of social capital-across time are sparse. To address this issue, we use various cross-national public-opinion data sets including the World Values Survey and employ pooled time-series OLS regression and fixed- and random-effects estimation techniques on an unbalanced panel of 74 countries and 248 observations spread over a 29-year time period. With these data and methods, we investigate the impact of five political-institutional factors-legal property rights, market regulations, labor market regulations, universality of socioeconomic provisions, and power-sharing capacity-on generalized trust. We find that generalized trust increases monotonically with the quality of property rights institutions, that labor market regulations increase generalized trust, and that power-sharing capacity of the state decreases generalized trust. While generalized trust increases as the government regulation of credit, business, and economic markets decreases and as the universality of socioeconomic provisions increases, both effects appear to be more sensitive to the countries included and the modeling techniques employed than the other political-institutional factors. In short, we find that political institutions simultaneously promote and undermine generalized trust.

Effect of low-carbohydrate claims on consumer perceptions about food products' healthfulness and helpfulness for weight management.

PubMed

Labiner-Wolfe, Judith; Jordan Lin, Chung-Tung; Verrill, Linda

2010-01-01

Evaluate effect of low-carbohydrate claims on consumer perceptions about food products' healthfulness and helpfulness for weight management. Experiment in which participants were randomly assigned 1 of 12 front-of-package claim conditions on bread or a frozen dinner. Seven of the 12 conditions also included Nutrition Facts (NF) information. Internet. 4,320 members of a national on-line consumer panel. Exposure to images of a food package. Ratings on Likert scales about perceived healthfulness, helpfulness for weight management, and caloric content. Mean ratings by outcome measure, condition, and product were calculated. Ratings were also used as the dependent measure in analysis of variance models. Participants who saw front-of-package-only conditions rated products bearing low-carbohydrate claims as more helpful for weight management and lower in calories than the same products without a claim. Those who saw the bread with low-carbohydrate claims also rated it as more healthful than those who saw no claim. When the NF label was available and products had the same nutrition profile, participants rated products with low-carbohydrate claims the same as those with no claim. Consumers who do not use the NF panel may interpret low-carbohydrate claims to have meaning beyond the scope of the claim itself. Published by Elsevier Inc.

A Blessing and a Curse? Political Institutions in the Growth and Decay of Generalized Trust: A Cross-National Panel Analysis, 1980–2009

PubMed Central

Robbins, Blaine G.

2012-01-01

Despite decades of research on social capital, studies that explore the relationship between political institutions and generalized trust–a key element of social capital–across time are sparse. To address this issue, we use various cross-national public-opinion data sets including the World Values Survey and employ pooled time-series OLS regression and fixed- and random-effects estimation techniques on an unbalanced panel of 74 countries and 248 observations spread over a 29-year time period. With these data and methods, we investigate the impact of five political-institutional factors–legal property rights, market regulations, labor market regulations, universality of socioeconomic provisions, and power-sharing capacity–on generalized trust. We find that generalized trust increases monotonically with the quality of property rights institutions, that labor market regulations increase generalized trust, and that power-sharing capacity of the state decreases generalized trust. While generalized trust increases as the government regulation of credit, business, and economic markets decreases and as the universality of socioeconomic provisions increases, both effects appear to be more sensitive to the countries included and the modeling techniques employed than the other political-institutional factors. In short, we find that political institutions simultaneously promote and undermine generalized trust. PMID:22558122

Aerothermoelastic Topology Optimization with Flutter and Buckling Metrics (Postprint)

DTIC Science & Technology

2013-07-01

topologies of an unheated panel, thermal buckling-optimal topologies, and flutter- optimality of a heated panel (where the latter case presents a...topological compromise between the former two). The effect of various constraint boundaries, temperature gradients, and (for the flutter of the heated panel...optimality of a heated panel (where the latter case presents a topological compromise between the former two). The effect of various constraint boundaries

A Randomized Study Comparing Digital Imaging to Traditional Glass Slide Microscopy for Breast Biopsy and Cancer Diagnosis

PubMed Central

Elmore, Joann G.; Longton, Gary M.; Pepe, Margaret S.; Carney, Patricia A.; Nelson, Heidi D.; Allison, Kimberly H.; Geller, Berta M.; Onega, Tracy; Tosteson, Anna N. A.; Mercan, Ezgi; Shapiro, Linda G.; Brunyé, Tad T.; Morgan, Thomas R.; Weaver, Donald L.

2017-01-01

Background: Digital whole slide imaging may be useful for obtaining second opinions and is used in many countries. However, the U.S. Food and Drug Administration requires verification studies. Methods: Pathologists were randomized to interpret one of four sets of breast biopsy cases during two phases, separated by ≥9 months, using glass slides or digital format (sixty cases per set, one slide per case, n = 240 cases). Accuracy was assessed by comparing interpretations to a consensus reference standard. Intraobserver reproducibility was assessed by comparing the agreement of interpretations on the same cases between two phases. Estimated probabilities of confirmation by a reference panel (i.e., predictive values) were obtained by incorporating data on the population prevalence of diagnoses. Results: Sixty-five percent of responding pathologists were eligible, and 252 consented to randomization; 208 completed Phase I (115 glass, 93 digital); and 172 completed Phase II (86 glass, 86 digital). Accuracy was slightly higher using glass compared to digital format and varied by category: invasive carcinoma, 96% versus 93% (P = 0.04); ductal carcinoma in situ (DCIS), 84% versus 79% (P < 0.01); atypia, 48% versus 43% (P = 0.08); and benign without atypia, 87% versus 82% (P < 0.01). There was a small decrease in intraobserver agreement when the format changed compared to when glass slides were used in both phases (P = 0.08). Predictive values for confirmation by a reference panel using glass versus digital were: invasive carcinoma, 98% and 97% (not significant [NS]); DCIS, 70% and 57% (P = 0.007); atypia, 38% and 28% (P = 0.002); and benign without atypia, 97% and 96% (NS). Conclusions: In this large randomized study, digital format interpretations were similar to glass slide interpretations of benign and invasive cancer cases. However, cases in the middle of the spectrum, where more inherent variability exists, may be more problematic in digital format. Future studies evaluating the effect these findings exert on clinical practice and patient outcomes are required. PMID:28382226

Effects of Blank Curvature and Tool Conditions on the Spring Back of Thin Sheet Panel Formed through Local Embossing and Edge L-Bending

NASA Astrophysics Data System (ADS)

Park, Keecheol; Park, Jongyoun; Nam, Jaebok

2011-08-01

Due to the application of thinner sheet steels, the stamped panels in the forming process, generally, are severely distorted. The wavy shape of embossed panel finally converted to residual stress embedded in the panel at final forming (edge L-bending) and it is known as the cause of twisting and oil canning of spring backed panel. Another important source of stamped shape deviation is the curvature of blank. The effects of blank curvature on the shape defects (panel curvature and twisting) after stamping were investigated from defective panel analysis, model experiment and stamping simulation. And the effect of tool conditions (BHF and bead height change) on spring backed shape of real TV bottom chassis were studied. The initial curvature of blank was remained in the flat area of stamped panels as width directional curvature. It converted from length direction curvature of blank. The curvature of initial blank reduced the wavy shape after local emboss forming, but twisting after edge L-bending was increased at large blank curvature cases. The effects of emboss forming conditions, the forming heights and blank holding force were studied and it was found that the wavy shape of stamped sheet was rapidly changed although the forming conditions altered very small amount.

Nonlinear random response prediction using MSC/NASTRAN

NASA Technical Reports Server (NTRS)

Robinson, J. H.; Chiang, C. K.; Rizzi, S. A.

1993-01-01

An equivalent linearization technique was incorporated into MSC/NASTRAN to predict the nonlinear random response of structures by means of Direct Matrix Abstract Programming (DMAP) modifications and inclusion of the nonlinear differential stiffness module inside the iteration loop. An iterative process was used to determine the rms displacements. Numerical results obtained for validation on simple plates and beams are in good agreement with existing solutions in both the linear and linearized regions. The versatility of the implementation will enable the analyst to determine the nonlinear random responses for complex structures under combined loads. The thermo-acoustic response of a hexagonal thermal protection system panel is used to highlight some of the features of the program.

Coupled optical-thermal-fluid and structural analyses of novel light-trapping tubular panels for concentrating solar power receivers

NASA Astrophysics Data System (ADS)

Ortega, Jesus D.; Christian, Joshua M.; Yellowhair, Julius E.; Ho, Clifford K.

2015-09-01

Traditional tubular receivers used in concentrating solar power are formed using tubes connected to manifolds to form panels; which in turn are arranged in cylindrical or rectangular shapes. Previous and current tubular receivers, such as the ones used in Solar One, Solar Two, and most recently the Ivanpah solar plants, have used a black paint coating to increase the solar absorptance of the receiver. However, these coatings degrade over time and must be reapplied, increasing the receiver maintenance cost. This paper presents the thermal efficiency evaluation of novel receiver tubular panels that have a higher effective solar absorptance due to a light-trapping effect created by arranging the tubes in each panel into unique geometric configurations. Similarly, the impact of the incidence angle on the effective solar absorptance and thermal efficiency is evaluated. The overarching goal of this work is to achieve effective solar absorptances of ~90% and thermal efficiencies above 85% without using an absorptance coating. Several panel geometries were initially proposed and were down-selected based on structural analyses considering the thermal and pressure loading requirements of molten salt and supercritical carbon-dioxide receivers. The effective solar absorptance of the chosen tube geometries and panel configurations were evaluated using the ray-tracing modeling capabilities of SolTrace. The thermal efficiency was then evaluated by coupling computational fluid dynamics with the ray-tracing results using ANSYS Fluent. Compared to the base case analysis (flat tubular panel), the novel tubular panels have shown an increase in effective solar absorptance and thermal efficiency by several percentage points.

Impact of a Pay-for-Performance Program on Care for Black Patients with Hypertension: Important Answers in the Era of the Affordable Care Act.

PubMed

Petersen, Laura A; Ramos, Kate Simpson; Pietz, Kenneth; Woodard, LeChauncy D

2017-06-01

Evaluate the effect of a pay-for-performance intervention on the quality of hypertension care provided to black patients and determine whether it produced risk selection. Primary data collected between 2007 and 2009 from Veterans Affairs physicians and their primary care panels. Nested study within a cluster randomized controlled trial of three types of financial incentives and no incentives (control). We compared the proportion of physicians' black patients meeting hypertension performance measures for baseline and final performance periods. We measured risk selection by comparing the proportion of patients who switched providers, patient visit frequency, and panel turnover. Due to limited power, we prespecified in the analysis plan combining the three incentive groups and oversampling black patients. Data collected electronically and by chart review. The proportion of black patients who achieved blood pressure control or received an appropriate response to uncontrolled blood pressure in the final period was 6.3 percent (95 percent confidence interval, 0.8-11.7 percent) greater for physicians who received an incentive than for controls. There was no difference between intervention and controls in the proportion of patients who switched providers, visit frequency, or panel turnover. A pay-for-performance intervention improved blood pressure control or appropriate response to uncontrolled blood pressure in black patients and did not produce risk selection. © Published 2016. This article is a U.S. Government work and is in the public domain in the USA.

A Versatile Panel of Reference Gene Assays for the Measurement of Chicken mRNA by Quantitative PCR

PubMed Central

Maier, Helena J.; Van Borm, Steven; Young, John R.; Fife, Mark

2016-01-01

Quantitative real-time PCR assays are widely used for the quantification of mRNA within avian experimental samples. Multiple stably-expressed reference genes, selected for the lowest variation in representative samples, can be used to control random technical variation. Reference gene assays must be reliable, have high amplification specificity and efficiency, and not produce signals from contaminating DNA. Whilst recent research papers identify specific genes that are stable in particular tissues and experimental treatments, here we describe a panel of ten avian gene primer and probe sets that can be used to identify suitable reference genes in many experimental contexts. The panel was tested with TaqMan and SYBR Green systems in two experimental scenarios: a tissue collection and virus infection of cultured fibroblasts. GeNorm and NormFinder algorithms were able to select appropriate reference gene sets in each case. We show the effects of using the selected genes on the detection of statistically significant differences in expression. The results are compared with those obtained using 28s ribosomal RNA, the present most widely accepted reference gene in chicken work, identifying circumstances where its use might provide misleading results. Methods for eliminating DNA contamination of RNA reduced, but did not completely remove, detectable DNA. We therefore attached special importance to testing each qPCR assay for absence of signal using DNA template. The assays and analyses developed here provide a useful resource for selecting reference genes for investigations of avian biology. PMID:27537060

Structural parameters that influence the noise reduction characteristics of typical general aviation materials

NASA Technical Reports Server (NTRS)

Roskam, J.; Grosveld, F.

1980-01-01

Effect of panel curvature and oblique angle of sound incidence on noise reduction characteristics of an aluminum panel are experimentally investigated. Panel curvature results show significant increase in stiffness with comparable decrease of sound transmission through the panel in the frequency region below the panel/cavity resonance frequency. Noise reduction data have been achieved for aluminum panels with clamped, bonded and riveted edge conditions. These edge conditions are shown to influence noise reduction characteristics of aluminum panels. Experimentally measured noise reduction characteristics of flat aluminum panels with uniaxial and biaxial in-plane stresses are presented and discussed. Results indicate important improvement in noise reduction of these panels in the frequency range below the fundamental panel/cavity resonance frequency.

Evaluation of Thin Kevlar-Epoxy Fabric Panels Subjected to Shear Loading

NASA Technical Reports Server (NTRS)

Baker, Donald J.

1996-01-01

The results of an analytical and experimental investigation of 4-ply Kevlar-49-epoxy panels loaded by in-plane shear are presented. Approximately one-half of the panels are thin-core sandwich panels and the other panels are solid-laminate panels. Selected panels were impacted with an aluminum sphere at a velocity of either 150 or 220 ft/sec. The strength of panels impacted at 150 ft/sec was not reduced when compared to the strength of the undamaged panels, but the strength of panels impacted at 220 ft/sec was reduced by 27 to 40 percent. Results are presented for panels that were cyclically loaded from a load less than the buckling load to a load in the postbuckling load range. The thin-core sandwich panels had a lower fatigue life than the solid panels. The residual strength of the solid and sandwich panels cycled more than one million cycles exceeded the baseline undamaged panel strengths. The effect of hysteresis in the response of the sandwich panels is not significant. Results of a nonlinear finite element analysis conducted for each panel design are presented.

Impact-damaged graphite-thermoplastic trapezoidal-corrugation sandwich and semi-sandwich panels

NASA Technical Reports Server (NTRS)

Jegley, D.

1993-01-01

The results of a study of the effects of impact damage on compression-loaded trapezoidal-corrugation sandwich and semi-sandwich graphite-thermoplastic panels are presented. Sandwich panels with two identical face sheets and a trapezoidal corrugated core between them, and semi-sandwich panels with a corrugation attached to a single skin are considered in this study. Panels were designed, fabricated and tested. The panels were made using the manufacturing process of thermoforming, a less-commonly used technique for fabricating composite parts. Experimental results for unimpacted control panels and panels subjected to impact damage prior to loading are presented. Little work can be found in the literature about these configurations of thermoformed panels.

Analysis of Composite Panels Subjected to Thermo-Mechanical Loads

NASA Technical Reports Server (NTRS)

Noor, Ahmed K.; Peters, Jeanne M.

1999-01-01

The results of a detailed study of the effect of cutout on the nonlinear response of curved unstiffened panels are presented. The panels are subjected to combined temperature gradient through-the-thickness combined with pressure loading and edge shortening or edge shear. The analysis is based on a first-order, shear deformation, Sanders-Budiansky-type shell theory with the effects of large displacements, moderate rotations, transverse shear deformation, and laminated anisotropic material behavior included. A mixed formulation is used with the fundamental unknowns consisting of the generalized displacements and the stress resultants of the panel. The nonlinear displacements, strain energy, principal strains, transverse shear stresses, transverse shear strain energy density, and their hierarchical sensitivity coefficients are evaluated. The hierarchical sensitivity coefficients measure the sensitivity of the nonlinear response to variations in the panel parameters, as well as in the material properties of the individual layers. Numerical results are presented for cylindrical panels and show the effects of variations in the loading and the size of the cutout on the global and local response quantities as well as their sensitivity to changes in the various panel, layer, and micromechanical parameters.

Novel biomarkers for cardiovascular risk assessment: current status and future directions.

PubMed

MacNamara, James; Eapen, Danny J; Quyyumi, Arshed; Sperling, Laurence

2015-09-01

Cardiovascular disease (CVD) is the leading cause of mortality in the modern world. Traditional risk algorithms may miss up to 20% of CVD events. Therefore, there is a need for new cardiac biomarkers. Many fields of research are dedicated to improving cardiac risk prediction, including genomics, transcriptomics and proteomics. To date, even the most promising biomarkers have only demonstrated modest associations and predictive ability. Few have undergone randomized control trials. A number of biomarkers are targets to new therapies aimed to reduce cardiovascular risk. Currently, some of the most promising risk prediction has been demonstrated with panels of multiple biomarkers. This article reviews the current state and future of proteomic biomarkers and aggregate biomarker panels.

Postbuckling behavior of axially compressed graphite-epoxy cylindrical panels with circular holes

NASA Technical Reports Server (NTRS)

Knight, N. F., Jr.; Starnes, J. H., Jr.

1984-01-01

The results of an experimental and analytical study of the effects of circular holes on the postbuckling behavior of graphite-epoxy cylindrical panels loaded in axial compression are presented. The STAGSC-1 general shell analysis computer code is used to determine the buckling and postbuckling response of the panels. The loaded, curved ends of the specimens were clamped by fixtures and the unloaded, straight edges were simply supported by knife-edge restraints. The panels are loaded by uniform end shortening to several times the end shortening at buckling. The unstable equilibrium path of the postbuckling response is obtained analytically by using a method based on controlling an equilibrium-path-arc-length parameter instead of the traditional load parameter. The effects of hole diameter, panel radius, and panel thickness on postbuckling response are considered in the study. Experimental results are compared with the analytical results and the failure characteristics of the graphite-epoxy panels are described.

A pilot Internet "value of health" panel: recruitment, participation and compliance.

PubMed

Stein, Ken; Dyer, Matthew; Crabb, Tania; Milne, Ruairidh; Round, Alison; Ratcliffe, Julie; Brazier, John

2006-11-27

To pilot using a panel of members of the public to provide preference data via the Internet A stratified random sample of members of the general public was recruited and familiarized with the standard gamble procedure using an Internet based tool. Health states were periodically presented in "sets" corresponding to different conditions, during the study. The following were described: Recruitment (proportion of people approached who were trained); Participation (a) the proportion of people trained who provided any preferences and (b) the proportion of panel members who contributed to each "set" of values; and Compliance (the proportion, per participant, of preference tasks which were completed). The influence of covariates on these outcomes was investigated using univariate and multivariate analyses. A panel of 112 people was recruited. 23% of those approached (n = 5,320) responded to the invitation, and 24% of respondents (n = 1,215) were willing to participate (net = 5.5%). However, eventual recruitment rates, following training, were low (2.1% of those approached). Recruitment from areas of high socioeconomic deprivation and among ethnic minority communities was low. Eighteen sets of health state descriptions were considered over 14 months. 74% of panel members carried out at least one valuation task. People from areas of higher socioeconomic deprivation and unmarried people were less likely to participate. An average of 41% of panel members expressed preferences on each set of descriptions. Compliance ranged from 3% to 100%. It is feasible to establish a panel of members of the general public to express preferences on a wide range of health state descriptions using the Internet, although differential recruitment and attrition are important challenges. Particular attention to recruitment and retention in areas of high socioeconomic deprivation and among ethnic minority communities is necessary. Nevertheless, the panel approach to preference measurement using the Internet offers the potential to provide specific utility data in a responsive manner for use in economic evaluations and to address some of the outstanding methodological uncertainties in this field.

Elucidating the effects of solar panel waste glass substitution on the physical and mechanical characteristics of clay bricks.

PubMed

Lin, Kae-Long; Huang, Long-Sheng; Shie, Je-Lueng; Cheng, Ching-Jung; Lee, Ching-Hwa; Chang, Tien-Chin

2013-01-01

This study deals with the effect of solar panel waste glass on fired clay bricks. Brick samples were heated to temperatures which varied from 700-1000 degrees C for 6 h, with a heating rate of 10 degrees C min(-1). The material properties of the resultant material were then determined, including speciation variation, loss on ignition, shrinkage, bulk density, 24-h absorption rate, compressive strength and salt crystallization. The results indicate that increasing the amount of solar panel waste glass resulted in a decrease in the water absorption rate and an increase in the compressive strength of the solar panel waste glass bricks. The 24-h absorption rate and compressive strength of the solar panel waste glass brick made from samples containing 30% solar panel waste glass sintered at 1000 degrees C all met the Chinese National Standard (CNS) building requirements for first-class brick (compressive strengths and water absorption of the bricks were 300 kg cm(-2) and 10% of the brick, respectively). The addition of solar panel waste glass to the mixture reduced the degree of firing shrinkage. The salt crystallization test and wet-dry tests showed that the addition of solar panel waste glass had highly beneficial effects in that it increased the durability of the bricks. This indicates that solar panel waste glass is indeed suitable for the partial replacement of clay in bricks.

Design of a new high-performance pointing controller for the Hubble Space Telescope

NASA Technical Reports Server (NTRS)

Johnson, C. D.

1993-01-01

A new form of high-performance, disturbance-adaptive pointing controller for the Hubble Space Telescope (HST) is proposed. This new controller is all linear (constant gains) and can maintain accurate 'pointing' of the HST in the face of persistent randomly triggered uncertain, unmeasurable 'flapping' motions of the large attached solar array panels. Similar disturbances associated with antennas and other flexible appendages can also be accommodated. The effectiveness and practicality of the proposed new controller is demonstrated by a detailed design and simulation testing of one such controller for a planar-motion, fully nonlinear model of HST. The simulation results show a high degree of disturbance isolation and pointing stability.

Integrated multigene expression panel to prognosticate patients with gastric cancer.

PubMed

Kanda, Mitsuro; Murotani, Kenta; Tanaka, Haruyoshi; Miwa, Takashi; Umeda, Shinichi; Tanaka, Chie; Kobayashi, Daisuke; Hayashi, Masamichi; Hattori, Norifumi; Suenaga, Masaya; Yamada, Suguru; Nakayama, Goro; Fujiwara, Michitaka; Kodera, Yasuhiro

2018-04-10

Most of the proposed individual markers had limited clinical utility due to the inherent biological and genetic heterogeneity of gastric cancer. We aimed to build a new molecular-based model to predict prognosis in patients with gastric cancer. A total of 200 patients who underwent gastric resection for gastric cancer were divided into learning and validation cohorts using a table of random numbers in a 1:1 ratio. In the learning cohort, mRNA expression levels of 15 molecular markers in gastric tissues were analyzed and concordance index (C-index) values of all single and combinations of the 15 candidate markers for overall survival were calculated. The multigene expression panel was designed according to C-index values and the subpopulation index. Expression scores were determined with weighting according to the coefficient of each constituent. The reproducibility of the panel was evaluated in the validation cohort. C-index values of the 15 single candidate markers ranged from 0.506-0.653. Among 32,767 combinations, the optimal and balanced expression panel comprised four constituents ( MAGED2, SYT8, BTG1 , and FAM46 ) and the C-index value was 0.793. Using this panel, patients were provisionally categorized with scores of 1-3, and clearly stratified into favorable, intermediate, and poor overall survival groups. In the validation cohort, both overall and disease-free survival rates decreased incrementally with increasing expression scores. Multivariate analysis revealed that the expression score was an independent prognostic factor for overall survival after curative gastrectomy. We developed an integrated multigene expression panel that simply and accurately stratified risk of patients with gastric cancer.

Aeroelastic Analysis Of Versatile Thermal Insulation Panels For Launchers Applications

NASA Astrophysics Data System (ADS)

Carrera, E.; Zappino, E.; Augello, G.; Ferrarese, A.; Montabone, M.

2011-05-01

The aeroelastic behavior of a Versatile Thermal Insulation (VTI) has been investigated. Among the various loadings acting on the panels in this work the attention is payed to fluid structure interaction. e.g. panel flutter phenomena. Known available results from open literature, related to similar problems, permit to analyze the effect of various Mach regimes, including boundary layers thickness effects, in-plane mechanical and thermal loadings, nonlinear effect and amplitude of so called limit cycle oscillations. Dedicated finite element model is developed for the supersonic regime. The model used for coupling orthotropic layered structural model with to Piston Theory aerodynamic models allows the calculations of flutter conditions in case of curved panels supported in a dis- crete number of points. Through this approach the flutter boundaries of the VTI-panel have been investigated.

Fatigue flaw growth behavior in stiffened and unstiffened panels loaded in biaxial tension

NASA Technical Reports Server (NTRS)

Beck, E. J.

1973-01-01

The effect was investigated of biaxial loading on the flaw growth rate of 2219-T87 aluminum alloy that would be typical of Space Shuttle cryogenic tankage design. The stress distribution and stress concentration factors for several integrally stiffened panels under various loading conditions were obtained. The flaw growth behavior of both stiffened and unstiffened panels under biaxial loading conditions was determined. The effect of a complex stress state was studied by introducing flaws in fillet areas of biaxially loaded stiffened panels.

Vitamin-Fortified Snack Food May Lead Consumers to Make Poor Dietary Decisions.

PubMed

Verrill, Linda; Wood, Dallas; Cates, Sheryl; Lando, Amy; Zhang, Yuanting

2017-03-01

The US Food and Drug Administration's (FDA's) fortification policy discourages the fortification of certain foods, including sugars and snack foods such as cookies, candies, cakes, chips, and carbonated beverages, yet manufacturers sometimes add vitamins and minerals to snack foods. To assess whether vitamin-fortified snack foods affect consumers' information-seeking, purchase decisions, and product-related health perceptions. For this experimental study, participants were randomly assigned to study conditions to compare products that varied in product type, nutrition profile, and fortification and nutrient claim status. Data were collected via an online consumer panel. US adults aged 18 years and older were randomly selected from Research Now's e-panel online household panel. Data were collected during fall 2014 (N=5,076). Participants were randomly assigned to one of 24 conditions: two products (vegetable chip/potato chip), two nutrition profiles (healthier/less healthy), two fortification scenarios (not fortified/fortified), and three nutrient claim conditions (two no claim/one with claim). The design was not balanced; claims were not shown on products that were not vitamin fortified. Outcome measures were information-seeking (viewed the Nutrition Facts label), purchase decisions, perception of product healthfulness, and correct selection of product with the healthier nutrient profile. Logistic regression was used to test all models. Analyses was adjusted for general label use, consumes product, health status, age, sex, level of education, presence of children in the household, and race/ethnicity. When the snack food carried a nutrient claim for vitamin fortification, participants were 1) less likely to look for nutrition information on the Nutrition Facts label, 2) more likely to select the product for purchase, 3) more likely to perceive the product as healthier, and 4) less likely to correctly choose the healthier product. Snack foods that have been vitamin-fortified may cause consumers to make poor dietary decisions. Copyright © 2017 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Acute effects of PM2.5 on lung function parameters in schoolchildren in Nanjing, China: a panel study.

PubMed

Xu, Dandan; Zhang, Yi; Zhou, Lian; Li, Tiantian

2018-03-17

The association between exposure to ambient particulate matter (PM) and reduced lung function parameters has been reported in many works. However, few studies have been conducted in developing countries with high levels of air pollution like China, and little attention has been paid to the acute effects of short-term exposure to air pollution on lung function. The study design consisted of a panel comprising 86 children from the same school in Nanjing, China. Four measurements of lung function were performed. A mixed-effects regression model with study participant as a random effect was used to investigate the relationship between PM 2.5 and lung function. An increase in the current day, 1-day and 2-day moving average PM 2.5 concentration was associated with decreases in lung function indicators. The greatest effect of PM 2.5 on lung function was detected at 1-day moving average PM 2.5 exposure. An increase of 10 μg/m 3 in the 1-day moving average PM 2.5 concentration was associated with a 23.22 mL decrease (95% CI: 13.19, 33.25) in Forced Vital Capacity (FVC), a 18.93 mL decrease (95% CI: 9.34, 28.52) in 1-s Forced Expiratory Volume (FEV 1 ), a 29.38 mL/s decrease (95% CI: -0.40, 59.15) in Peak Expiratory Flow (PEF), and a 27.21 mL/s decrease (95% CI: 8.38, 46.04) in forced expiratory flow 25-75% (FEF 25-75% ). The effects of PM 2.5 on lung function had significant lag effects. After an air pollution event, the health effects last for several days and we still need to pay attention to health protection.

Targeted Proteomics Approach for Precision Plant Breeding.

PubMed

Chawade, Aakash; Alexandersson, Erik; Bengtsson, Therese; Andreasson, Erik; Levander, Fredrik

2016-02-05

Selected reaction monitoring (SRM) is a targeted mass spectrometry technique that enables precise quantitation of hundreds of peptides in a single run. This technique provides new opportunities for multiplexed protein biomarker measurements. For precision plant breeding, DNA-based markers have been used extensively, but the potential of protein biomarkers has not been exploited. In this work, we developed an SRM marker panel with assays for 104 potato (Solanum tuberosum) peptides selected using univariate and multivariate statistics. Thereafter, using random forest classification, the prediction markers were identified for Phytopthora infestans resistance in leaves, P. infestans resistance in tubers, and plant yield in potato leaf secretome samples. The results suggest that the marker panel has the predictive potential for three traits, two of which have no commercial DNA markers so far. Furthermore, the marker panel was also tested and found to be applicable to potato clones not used during the marker development. The proposed workflow is thus a proof-of-concept for targeted proteomics as an efficient readout in accelerated breeding for complex and agronomically important traits.

Preliminary study of head-up assessment techniques. 1: Viewing duration of instrument panel and HUD symbology using a recall methodology

NASA Technical Reports Server (NTRS)

Haines, R. F.

1978-01-01

Eight commercial pilots were shown 50 colored, high fidelity slides of a standard instrument panel (IP) with the needle positions of each instrument varying from slide to slide and then 50 slides of a head-up display (HUD) symbology format which contained an equivalent amount of flight-related information as the instrument panel slides. All stimuli were presented under controlled, static viewing conditions that allowed the measurement of the speed and accuracy with which one randomly selected flight parameter on each slide could be read. The subject did not know which parameter would be requested and, therefore, had to remember the total set of information in order to answer the question correctly. The results showed that from 6.6 - 8.7 sec total viewing time was required to correctly extract altitude, airspeed, heading, VSI, or ADI from the IP slides and from 6.1 to 7.4 sec for the HUD slides.

Fabrication and evaluation of brazed titanium-clad borsic/aluminum skin-stringer panels

NASA Technical Reports Server (NTRS)

Bales, T. T.; Royster, D. M.; Mcwithey, R. R.

1980-01-01

A successful brazing process was developed and evaluated for fabricating full-scale titanium-clad Borsic/aluminum skin-stringer panels. A panel design was developed consisting of a hybrid composite skin reinforced with capped honeycomb-core stringers. Six panels were fabricated for inclusion in the program which included laboratory testing of panels at ambient temperatures and 533 K (500 F) and flight service evaluation on the NASA Mach 3 YF-12 airplane. All panels tested met or exceeded stringent design requirements and no deleterious effects on panel properties were detected followng flight service evaluation on the YF-12 airplane.

Composite panel development at JPL

NASA Technical Reports Server (NTRS)

Mcelroy, Paul; Helms, Rich

1988-01-01

Parametric computer studies can be use in a cost effective manner to determine optimized composite mirror panel designs. An InterDisciplinary computer Model (IDM) was created to aid in the development of high precision reflector panels for LDR. The materials properties, thermal responses, structural geometries, and radio/optical precision are synergistically analyzed for specific panel designs. Promising panels designs are fabricated and tested so that comparison with panel test results can be used to verify performance prediction models and accommodate design refinement. The iterative approach of computer design and model refinement with performance testing and materials optimization has shown good results for LDR panels.

Buckling Behavior of Compression-Loaded Quasi-Isotropic Curved Panels with a Circular Cutout

NASA Technical Reports Server (NTRS)

Hilburger, Mark W.; Britt, Vicki O.; Nemeth, Michael P.

1999-01-01

Results from a numerical and experimental study of the response of compression-loaded quasi-isotropic curved panels with a centrally located circular cutout are presented. The numerical results were obtained by using a geometrically nonlinear finite element analysis code. The effects of cutout size, panel curvature and initial geo- metric imperfections on the overall response of compression-loaded panels are described. In addition, results are presented from a numerical parametric study that indicate the effects of elastic circumferential edge restraints on the prebuckling and buckling response of a selected panel and these numerical results are compared to experimentally measured results. These restraints are used to identify the effects of circumferential edge restraints that are introduced by the test fixture that was used in the present study. It is shown that circumferential edge restraints can introduce substantial nonlinear prebuckling deformations into shallow compression-loaded curved panels that can results in a significant increase in buckling load.

Vibration characteristics of an inclined flip-flow screen panel in banana flip-flow screens

NASA Astrophysics Data System (ADS)

Xiong, Xiaoyan; Niu, Linkai; Gu, Chengxiang; Wang, Yinhua

2017-12-01

A banana flip-flow screen is an effective solution for the screening of high-viscosity, high-water and fine materials. As one of the key components, the vibration characteristics of the inclined flip-flow screen panel largely affects the screen performance and the processing capacity. In this paper, a mathematical model for the vibration characteristic of the inclined flip-flow screen panel is proposed based on Catenary theory. The reasonability of Catenary theory in analyzing the vibration characteristic of flip-flow screen panels is verified by a published experiment. Moreover, the effects of the rotation speed of exciters, the incline angle, the slack length and the characteristics of the screen on the vertical deflection, the vertical velocity and the vertical acceleration of the screen panel are investigated parametrically. The results show that the rotation speed of exciters, the incline angle, the slack length and the characteristics of the screen have significant effects on the vibrations of an inclined flip-flow screen panel, and these parameters should be optimized.

Inequality, income, and poverty: comparative global evidence.

PubMed

Fosu, Augustin Kwasi

2010-01-01

Objectives. The study seeks to provide comparative global evidence on the role of income inequality, relative to income growth, in poverty reduction.Methods. An analysis-of-covariance model is estimated using a large global sample of 1980–2004 unbalanced panel data, with the headcount measure of poverty as the dependent variable, and the Gini coefficient and PPP-adjusted mean income as explanatory variables. Both random-effects and fixed-effects methods are employed in the estimation.Results. The responsiveness of poverty to income is a decreasing function of inequality, and the inequality elasticity of poverty is actually larger than the income elasticity of poverty. Furthermore, there is a large variation across regions (and countries) in the relative effects of inequality on poverty.Conclusion. Income distribution plays a more important role than might be traditionally acknowledged in poverty reduction, though this importance varies widely across regions and countries.

Facilitators and constraints at each stage of the migration decision process.

PubMed

Kley, Stefanie

2017-10-01

Behavioural models of migration emphasize the importance of migration decision-making for the explanation of subsequent behaviour. But empirical migration research regularly finds considerable gaps between those who intend to migrate and those who actually realize their intention. This paper applies the Theory of Planned Behaviour, enriched by the Rubicon model, to test specific hypotheses about distinct effects of facilitators and constraints on specific stages of migration decision-making and behaviour. The data come from a tailor-made panel survey based on random samples of people drawn from two German cities in 2006-07. The results show that in conventional models the effects of facilitators and constraints on migration decision-making are likely to be underestimated. Splitting the process of migration decision-making into a pre-decisional and a pre-actional phase helps to avoid bias in the estimated effects of facilitators and constraints on both migration decision-making and migration behaviour.

Pharmacokinetic and Pharmacodynamic Effects of Multiple-dose Administration of Omarigliptin, a Once-weekly Dipeptidyl Peptidase-4 Inhibitor, in Obese Participants With and Without Type 2 Diabetes Mellitus.

PubMed

Addy, Carol; Tatosian, Daniel; Glasgow, Xiaoli S; Gendrano, Isaias N; Kauh, Eunkyung; Martucci, Ashley; Johnson-Levonas, Amy O; Selverian, Diana; Matthews, Catherine Z; Gutierrez, Marie; Wagner, John A; Aubrey Stoch, S

2016-03-01

Omarigliptin (MK-3102) is a potent, oral, long-acting dipeptidyl peptidase (DPP)-4 inhibitor approved in Japan and in global development as a once-weekly treatment for type 2 diabetes mellitus (T2DM). The aim of this study was to investigate the pharmacokinetic (PK) and pharmacodynamic (PD) effects of omarigliptin in obese participants with and without T2DM. This was a Phase I, randomized, double-blind, placebo-controlled, multiple-dose study of 50-mg omarigliptin administered once weekly for 4 weeks. Participants included 24 obese but otherwise healthy subjects (panel A; omarigliptin, n = 18; placebo, n = 6) and 8 obese patients with T2DM (treatment naive, hemoglobin A1c ≥ 6.5% and ≤ 10.0% [panel B]; omarigliptin, n = 6; placebo, n = 2). Participants were 45 to 65 years of age with a body mass index of ≥ 30 and ≤ 40 kg/m(2). Blood sampling occurred at select time points, depending on the study panel, to evaluate the PK properties of omarigliptin, DPP-4 activity, active glucagon-like peptide 1 levels, and plasma glucose concentrations. Body weight was an exploratory end point. Due to sparse sampling in panel A, a thorough PK analysis was performed in obese patients with T2DM (panel B) only. PD analyses were performed in the overall study population (pooled panels A and B). PK profiles in obese participants with and without T2DM were similar to those observed in nonobese reference subjects (historical data). Steady state was achieved after 1 or 2 weekly doses in obese participants with and without T2DM. In obese patients with T2DM, omarigliptin was rapidly absorbed, with a median Tmax of 1 to 2.5 hours (days 1 and 22). Compared with those in reference subjects, the geometric mean ratios (95% CI) (Obese T2DM/reference) for steady-state plasma AUC0-168h, Cmax, and C168h were 0.80 (0.65-0.98), 0.86 (0.53-1.41), and 1.08 (0.88-1.33), respectively. Trough DPP-4 activity was inhibited by ~90%; postprandial (PP) 4-hour weighted mean active GLP-1 concentrations were increased ~2-fold; and PP glucose was significantly reduced with omarigliptin versus placebo in the pooled population. Omarigliptin was generally well-tolerated in the pooled population, and there were no hypoglycemic events. Consistent with other DPP-4 inhibitors, omarigliptin had no effect on body weight in this short-duration study. The administration of omarigliptin was generally well-tolerated in obese participants with and without T2DM, and the favorable PK and PD profiles support once-weekly dosing. Omarigliptin may provide an important once-weekly treatment option for patients with T2DM. ClinicalTrials.gov identifier: NCT01088711. Copyright © 2016 Elsevier HS Journals, Inc. All rights reserved.

Bio-Inspired Sensing and Display of Polarization Imagery

DTIC Science & Technology

2005-07-17

and weighting coefficients in this example. Panel 4D clearly shows a better visibility, feature extraction , and lesser effect from the background...of linear polarization. Panel E represents the segmentation of the degree of linear polarization, and then Panel F shows the extracted segment with...polarization, and Panel F shows the segment extraction with the finger print selected. Panel G illustrates the application of Canny edge detection to

Thermal and Mechanical Buckling Analysis of Hypersonic Aircraft Hat-Stiffened Panels With Varying Face Sheet Geometry and Fiber Orientation

NASA Technical Reports Server (NTRS)

Ko, William L.

1996-01-01

Mechanical and thermal buckling behavior of monolithic and metal-matrix composite hat-stiffened panels were investigated. The panels have three types of face-sheet geometry: Flat face sheet, microdented face sheet, and microbulged face sheet. The metal-matrix composite panels have three types of face-sheet layups, each of which is combined with various types of hat composite layups. Finite-element method was used in the eigenvalue extractions for both mechanical and thermal buckling. The thermal buckling analysis required both eigenvalue and material property iterations. Graphical methods of the dual iterations are shown. The mechanical and thermal buckling strengths of the hat-stiffened panels with different face-sheet geometry are compared. It was found that by just microdenting or microbulging of the face sheet, the axial, shear, and thermal buckling strengths of both types of hat-stiffened panels could be enhanced considerably. This effect is more conspicuous for the monolithic panels. For the metal-matrix composite panels, the effect of fiber orientations on the panel buckling strengths was investigated in great detail, and various composite layup combinations offering, high panel buckling strengths are presented. The axial buckling strength of the metal-matrix panel was sensitive to the change of hat fiber orientation. However, the lateral, shear, and thermal buckling strengths were insensitive to the change of hat fiber orientation.

Effect of food prices on the prevalence of obesity among young adults.

PubMed

Han, E; Powell, L M

2011-03-01

To examine the extent to which various food prices were associated with the obesity status of young adults. Retrospective cohort study of 6537 men and 5324 women in the USA using panel data from the Monitoring the Future Surveys (1992-2003), which were merged with two food-at-home and one food-away-from-home price measures from the American Chamber of Commerce Researchers Association. Longitudinal individual random effect and fixed effect models were estimated. This study found that food prices did not have a significant effect on the prevalence of obesity among young female adults. For young adult men, an individual random effect estimator suggested that a 10% increase in the price of fast food was associated with a 13.2% decrease in the probability of obesity, but this effect lost its economic and statistical significance once individual fixed effects were controlled for in the estimation. Overall, the results imply that observed time-varying individual characteristics, such as working status, marital status and school enrolment status, may over-ride the effect of changes in food prices for young adults. More research employing longitudinal data is necessary to determine if food subsidies or taxes, particularly soft drink and fast food taxes or subsidies for fruit and vegetables, could be effective policy measures to curtail the increasing prevalence of obesity among young adults. Copyright © 2010 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Active noise control using a distributed mode flat panel loudspeaker.

PubMed

Zhu, H; Rajamani, R; Dudney, J; Stelson, K A

2003-07-01

A flat panel distributed mode loudspeaker (DML) has many advantages over traditional cone speakers in terms of its weight, size, and durability. However, its frequency response is uneven and complex, thus bringing its suitability for active noise control (ANC) under question. This paper presents experimental results demonstrating the effective use of panel DML speakers in an ANC application. Both feedback and feedforward control techniques are considered. Effective feedback control with a flat panel speaker could open up a whole range of new noise control applications and has many advantages over feedforward control. The paper develops a new control algorithm to attenuate tonal noise of a known frequency by feedback control. However, due to the uneven response of the speakers, feedback control is found to be only moderately effective even for this narrow-band application. Feedforward control proves to be most capable for the flat panel speaker. Using feedforward control, the sound pressure level can be significantly reduced in close proximity to an error microphone. The paper demonstrates an interesting application of the flat panel in which the panel is placed in the path of sound and effectively used to block sound transmission using feedforward control. This is a new approach to active noise control enabled by the use of flat panels and can be used to prevent sound from entering into an enclosure in the first place rather than the traditional approach of attempting to cancel sound after it enters the enclosure.

Effects of eccentricities and lateral pressure on the design of stiffened compression panels

NASA Technical Reports Server (NTRS)

Giles, G. L.; Anderson, M. S.

1972-01-01

An analysis for determining the effects of eccentricities and lateral pressure on the design of stiffened compression panels is presented. The four types of panel stiffeners considered are integral, zee, integral zee, and integral tee. Mass-strength curves, which give the mass of the panel necessary to carry a specified load, are given along with related design equations needed to calculate the cross-sectional dimensions of the minimum-mass-stiffened panel. The results of the study indicate that the proportions of the panels are geometrically similar to the proportions of panels designed for no eccentricity or lateral pressure, but no cross-sectional dimensions are greater, resulting in significantly increased mass. The analytical minimum-mass designs of zee-stiffened panels are compared with designs from experimentally derived charts. An assumed eccentricity of 0.001 times the length of the panel is used to correlate the analytical and experimental data. Good correlation between the experimentally derived and the analytical curves is obtained for the range of loading where materials yield governs the design. At lower loads the mass given by the analytical curve using this assumed eccentricity is greater than that given by the experimental results.

Panel Conditioning in a Longitudinal Study of Adolescents' Substance Use: Evidence from an Experiment

ERIC Educational Resources Information Center

Torche, Florencia; Warren, John Robert; Halpern-Manners, Andrew; Valenzuela, Eduardo

2012-01-01

Panel surveys are widely used in sociology to examine life-course trajectories and to assess causal effects. However, when using panel data researchers usually assume that the act of measuring respondents' attitudes and behaviors has no effect on the attributes being measured or on the accuracy of reports about those attributes. Evidence from…

Effects of panel density and mat moisture content on processing medium density fiberboard

Treesearch

Zhiyong Cai; James H. Muehl; Jerrold E. Winandy

2006-01-01

Development of a fundamental understanding of heat transfer and resin curing during hot- pressing will help to optimize the manufacturing process of medium density fiberboard (MDF) allowing increased productivity, improved product quality, and enhanced durability. Effect of mat moisture content (MC) and panel density on performance of MDF panels, heat transfer,...

COMPUTERIZED EXPERT SYSTEM FOR EVALUATION OF AUTOMATED VISUAL FIELDS FROM THE ISCHEMIC OPTIC NEUROPATHY DECOMPRESSION TRIAL: METHODS, BASELINE FIELDS, AND SIX-MONTH LONGITUDINAL FOLLOW-UP

PubMed Central

Feldon, Steven E

2004-01-01

ABSTRACT Purpose To validate a computerized expert system evaluating visual fields in a prospective clinical trial, the Ischemic Optic Neuropathy Decompression Trial (IONDT). To identify the pattern and within-pattern severity of field defects for study eyes at baseline and 6-month follow-up. Design Humphrey visual field (HVF) change was used as the outcome measure for a prospective, randomized, multi-center trial to test the null hypothesis that optic nerve sheath decompression was ineffective in treating nonarteritic anterior ischemic optic neuropathy and to ascertain the natural history of the disease. Methods An expert panel established criteria for the type and severity of visual field defects. Using these criteria, a rule-based computerized expert system interpreted HVF from baseline and 6-month visits for patients randomized to surgery or careful follow-up and for patients who were not randomized. Results A computerized expert system was devised and validated. The system was then used to analyze HVFs. The pattern of defects found at baseline for patients randomized to surgery did not differ from that of patients randomized to careful follow-up. The most common pattern of defect was a superior and inferior arcuate with central scotoma for randomized eyes (19.2%) and a superior and inferior arcuate for nonrandomized eyes (30.6%). Field patterns at 6 months and baseline were not different. For randomized study eyes, the superior altitudinal defects improved (P = .03), as did the inferior altitudinal defects (P = .01). For nonrandomized study eyes, only the inferior altitudinal defects improved (P = .02). No treatment effect was noted. Conclusions A novel rule-based expert system successfully interpreted visual field defects at baseline of eyes enrolled in the IONDT. PMID:15747764

Do hospitals respond to rivals' quality and efficiency? A spatial panel econometric analysis.

PubMed

Longo, Francesco; Siciliani, Luigi; Gravelle, Hugh; Santos, Rita

2017-09-01

We investigate whether hospitals in the English National Health Service change their quality or efficiency in response to changes in quality or efficiency of neighbouring hospitals. We first provide a theoretical model that predicts that a hospital will not respond to changes in the efficiency of its rivals but may change its quality or efficiency in response to changes in the quality of rivals, though the direction of the response is ambiguous. We use data on eight quality measures (including mortality, emergency readmissions, patient reported outcome, and patient satisfaction) and six efficiency measures (including bed occupancy, cancelled operations, and costs) for public hospitals between 2010/11 and 2013/14 to estimate both spatial cross-sectional and spatial fixed- and random-effects panel data models. We find that although quality and efficiency measures are unconditionally spatially correlated, the spatial regression models suggest that a hospital's quality or efficiency does not respond to its rivals' quality or efficiency, except for a hospital's overall mortality that is positively associated with that of its rivals. The results are robust to allowing for spatially correlated covariates and errors and to instrumenting rivals' quality and efficiency. Copyright © 2017 John Wiley & Sons, Ltd.

Effect of Boundary Conditions on the Back Face Deformations of Flat UHMWPE Panels

DTIC Science & Technology

2014-12-01

Zhang [2] carried out a numerical study of the effects of clamping type and clamping pressure on the ballistic performance of woven Kevlar , and found...effects of composite size were also studied. Singletary [5] studied the effects of boundary conditions and panel sizes on V50 for Kevlar KM2 fabric. The...on the BFD in flat UHMWPE panels. UHMWPE possesses high tenacity and high strength compared to Kevlar , as a result of which it is the material of

Heave and Flow: Understanding the role of resonance and shape evolution for heaving flexible panels

NASA Astrophysics Data System (ADS)

Hoover, Alexander; Cortez, Ricardo; Tytell, Eric; Fauci, Lisa

2017-11-01

Many animals that swim or fly use their body to accelerate the fluid around them, transferring momentum from their bodies to the surrounding fluid. The emergent kinematics from this transfer are a result of the coupling between the fluid and the material properties of the body. Here we present a computational study of a 3-dimensional flexible panel that is heaved at its leading edge in an incompressible, viscous fluid. These high-fidelity numerical simulations enable us to examine the role of resonance, fluid forces, and panel deformations have on swimming performance. Varying both the passive material properties and the heaving frequency of the panel, we find peaks in trailing edge amplitude and forward swimming speed are determined by a dimensionless quantity, the effective flexibility. Modal decompositions of panel deflections reveal that the strength of each mode is related to the effective flexibility and peaks in the swimming speed and trailing edge amplitude correspond to peaks in the contributions of different modes. Panels of different material properties but with similar effective flexibilities have modal contributions that evolve similarly over the phase of the heaving cycle and agreement in dominant vortex structures generated by the panel. NSF RTG 1043626.

The effect of oblique angle of sound incidence, realistic edge conditions, curvature and in-plane panel stresses on the noise reduction characteristics of general aviation type panels

NASA Technical Reports Server (NTRS)

Grosveld, F.; Lameris, J.; Dunn, D.

1979-01-01

Experiments and a theoretical analysis were conducted to predict the noise reduction of inclined and curved panels. These predictions are compared to the experimental results with reasonable agreement between theory and experiment for panels under an oblique angle of sound incidence. Theoretical as well as experimental results indicate a big increase in noise reduction when a flat test panel is curved. Further curving the panel slightly decreases the noise reduction. Riveted flat panels are shown to give a higher noise reduction in the stiffness-controlled frequency region, while bonded panels are superior in this region when the test panel is curved. Experimentally measured noise reduction characteristics of flat aluminum panels with uniaxial in-plane stresses are presented and discussed. These test results indicate an important improvement in the noise reduction of these panels in the frequency range below the fundamental panel/cavity frequency.

Multipurpose Panel Display Device Investigation. [technology assessment and product development

NASA Technical Reports Server (NTRS)

Sliwa, R.

1977-01-01

A multipurpose panel was developed to provide a flexible control and a LED display panel with easily changeable nomenclature for use in applications where panel space is limited, but where a number of similar subsystems must be controlled, or where basic panel nomenclature and functions must be changed rapidly, as in the case of between mission changes of space shuttle payloads. In the first application, panel area limitations are overcome by time sharing a central control panel among several subsystems. In the latter case, entire control panel changes are effected by simply replacing a memory module, thereby reducing the extent of installation and checkout procedures between missions. Several types of control technologies (other than LED's) which show potential in meeting criteria for overcoming limitations of the panel are assessed.

Cell Phones in American High Schools: A National Survey

ERIC Educational Resources Information Center

Obringer, S. John; Coffey, Kent

2007-01-01

A survey instrument to determine school policy and practice regarding cell phone use by teachers and students was developed using a literature review, a panel of experts, and then a pilot study with typical respondents. The survey was mailed out randomly to 200 high school principals representing all 50 states. The return rate was 56 percent with…

Design of a Computer-Controlled, Random-Access Slide Projector Interface. Final Report (April 1974 - November 1974).

ERIC Educational Resources Information Center

Kirby, Paul J.; And Others

The design, development, test, and evaluation of an electronic hardware device interfacing a commercially available slide projector with a plasma panel computer terminal is reported. The interface device allows an instructional computer program to select slides for viewing based upon the lesson student situation parameters of the instructional…

Fire-retardant-treated strandboard : properties and fire performance

Treesearch

Jerrold Winandy; Qingwen Wang; Robert H. White

2008-01-01

This study evaluated a series of single-layer, randomly oriented strandboard panels made with one resin type, a single resin loading level, and four fire-retardant-treatment levels. The fire retardant (FR) evaluated was a pH-buffered combination of boric acid and organic phosphate. Siberian larch strands were separated into five batches. One batch of strands served as...

Use of Nutritional Information in Canada: National Trends between 2004 and 2008

ERIC Educational Resources Information Center

Goodman, Samantha; Hammond, David; Pillo-Blocka, Francy; Glanville, Theresa; Jenkins, Richard

2011-01-01

Objective: To examine longitudinal trends in use of nutrition information among Canadians. Design: Population-based telephone and Internet surveys. Setting and Participants: Representative samples of Canadian adults recruited with random-digit dialing sampling in 2004 (n = 2,405) and 2006 (n = 2,014) and an online commercial panel in 2008 (n =…

Early Schooling: The Handicap of Being Poor and Male

ERIC Educational Resources Information Center

Entwisle, Doris R.; Alexander, Karl L.; Olson, Linda S.

2007-01-01

In trying to understand the origin of gender differences favoring girls in reading skills, analysts have examined mainly the performance of students who are in the same grade, with samples pooled across socioeconomic status (SES). Using a longitudinal sample in Baltimore, where all students in a randomly selected panel are the same age and are…

What Affects People's Willingness to Participate in Qualitative Research? An Experimental Comparison of Five Incentives

ERIC Educational Resources Information Center

Kelly, Bridget; Margolis, Marjorie; McCormack, Lauren; LeBaron, Patricia A.; Chowdhury, Dhuly

2017-01-01

The literature on factors that influence participation in qualitative research is lacking. We conducted an experiment with a nationally representative sample to test the impact of different incentive types and amounts on willingness to participate in a hypothetical qualitative interview. We randomized participants from an online panel to one of…

Evaluating approved medications to treat allergic rhinitis in the United States: an evidence-based review of efficacy for nasal symptoms by class.

PubMed

Benninger, Michael; Farrar, Judith R; Blaiss, Michael; Chipps, Bradley; Ferguson, Berrylin; Krouse, John; Marple, Bradley; Storms, William; Kaliner, Michael

2010-01-01

To evaluate how well the medications currently approved in the United States for allergic rhinitis (AR) treat nasal symptoms when examined according to Food and Drug Administration-indicated uses and dosages. MEDLINE (1966 onward), EMBASE (1974 onward), and the Cochrane Library (2007) were systematically searched according to the following criteria defined at a roundtable meeting of the authors: randomized controlled trial, at least a 2-week duration, and approved indication and dosage in the United States. Data from studies that met the inclusion criteria were extracted into evidence tables, which were reviewed twice by the full panel of authors. Individual panel members also were asked to comment on abstracts, articles, and summary tables based on their known expertise. The entire faculty approved the selection of studies included in this review. Fifty-four randomized, placebo-controlled studies involving more than 14,000 adults and 1,580 children with AR met the criteria for review: 38 studies of seasonal allergic rhinitis (SAR; n = 11,980 adults and 946 children) and 12 studies of perennial allergic rhinitis (PAR; n = 3,800 adults and 366 children). The median percentage changes from baseline for total nasal symptom score for SAR were as follows: nasal antihistamines, -22.2%; oral antihistamines, -23.5%; intranasal steroids (INSs), -40.7%; and placebo, -15.0%. For PAR, the changes were as follows: oral antihistamines, -51.4%; INSs, -37.3%; and placebo, -24.8%. Data for mediator antagonists were limited. The data, although limited, confirm that INSs produce the greatest improvements in nasal symptoms in patients with SAR. In addition, INSs are effective for PAR, but the data were of variable quality, and oral antihistamines may be equally effective for some patients. The reporting of published data should be standardized to permit better comparisons in future studies.

Optimization of composite sandwich cover panels subjected to compressive loadings

NASA Technical Reports Server (NTRS)

Cruz, Juan R.

1991-01-01

An analysis and design method is presented for the design of composite sandwich cover panels that includes transverse shear effects and damage tolerance considerations. This method is incorporated into an optimization program called SANDOP (SANDwich OPtimization). SANDOP is used in the present study to design optimized composite sandwich cover panels for transport aircraft wing applications as a demonstration of its capabilities. The results of this design study indicate that optimized composite sandwich cover panels have approximately the same structural efficiency as stiffened composite cover panels designed to identical constraints. Results indicate that inplane stiffness requirements have a large effect on the weight of these composite sandwich cover panels at higher load levels. Increasing the maximum allowable strain and the upper percentage limit of the 0 degree and plus or minus 45 degree plies can yield significant weight savings. The results show that the structural efficiency of these optimized composite sandwich cover panels is relatively insensitive to changes in core density.

Study of noise reduction characteristics of double-wall panels

NASA Technical Reports Server (NTRS)

Navaneethan, R.; Quayle, B.; Stevenson, S.; Graham, M.

1983-01-01

The noise reduction characteristics of general aviation type, flat, double-wall structures were investigated. The experimental study was carried out on 20-by-20 inch panels with an exposed area of 18 by 18 inches. A frequency range from 20 to 5000 Hz was covered. The experimental results, in general, follow the expected trends. At low frequencies the double-wall structures are no better than the single-wall structures. However, for depths normally used in the general aviation industry, the double-wall panels are very attractive. The graphite-spoxy skin panels have higher noise reduction at very low frequencies ( 100 Hz) than the Kevlar skin panels. But the aluminum panels have higher noise reduction in the high frequency region, due to their greater mass. Use of fiberglass insulation is not effective in the low frequency region, and at times it is even negative. But the insulation is effective in the high-frequency region. The theoretical model for predicting the transmission loss of these multilayered panels is also discussed.

Study of noise reduction characteristics of double-wall panels

NASA Astrophysics Data System (ADS)

Navaneethan, R.; Quayle, B.; Stevenson, S.; Graham, M.

1983-05-01

The noise reduction characteristics of general aviation type, flat, double-wall structures were investigated. The experimental study was carried out on 20-by-20 inch panels with an exposed area of 18 by 18 inches. A frequency range from 20 to 5000 Hz was covered. The experimental results, in general, follow the expected trends. At low frequencies the double-wall structures are no better than the single-wall structures. However, for depths normally used in the general aviation industry, the double-wall panels are very attractive. The graphite-spoxy skin panels have higher noise reduction at very low frequencies ( 100 Hz) than the Kevlar skin panels. But the aluminum panels have higher noise reduction in the high frequency region, due to their greater mass. Use of fiberglass insulation is not effective in the low frequency region, and at times it is even negative. But the insulation is effective in the high-frequency region. The theoretical model for predicting the transmission loss of these multilayered panels is also discussed.

Effect of geometry on thermal aging behavior of Celion/LARC-160 composites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, J.B.

1987-12-01

Laminates of Celion/LARC-160, fabricated in thicknesses from 4 to 16 ply and in unidirectional, x-ply and fabric ply configurations, were isothermally aged at temperatures of 204, 260 and 316 C for periods up to 15,000 hours. Weight-loss of the test panels was measured at selected intervals during aging. At the lower aging temperatures, it was observed that panel thickness and ply arrangement influenced the apparent stability: i.e., thicker panels degraded less than thin panels and unidirectional panels degraded less than x-ply or fabric reinforced panels. At higher aging temperatures, all panel configurations and thicknesses converged toward the same behavior.

Multilevel modeling and panel data analysis in educational research (Case study: National examination data senior high school in West Java)

NASA Astrophysics Data System (ADS)

Zulvia, Pepi; Kurnia, Anang; Soleh, Agus M.

2017-03-01

Individual and environment are a hierarchical structure consist of units grouped at different levels. Hierarchical data structures are analyzed based on several levels, with the lowest level nested in the highest level. This modeling is commonly call multilevel modeling. Multilevel modeling is widely used in education research, for example, the average score of National Examination (UN). While in Indonesia UN for high school student is divided into natural science and social science. The purpose of this research is to develop multilevel and panel data modeling using linear mixed model on educational data. The first step is data exploration and identification relationships between independent and dependent variable by checking correlation coefficient and variance inflation factor (VIF). Furthermore, we use a simple model approach with highest level of the hierarchy (level-2) is regency/city while school is the lowest of hierarchy (level-1). The best model was determined by comparing goodness-of-fit and checking assumption from residual plots and predictions for each model. Our finding that for natural science and social science, the regression with random effects of regency/city and fixed effects of the time i.e multilevel model has better performance than the linear mixed model in explaining the variability of the dependent variable, which is the average scores of UN.

Stress-wave velocity of wood-based panels: effect of moisture, product type, and material direction

Treesearch

Guangping Han; Qinglin Wu; Xiping Wang

2006-01-01

The effect of moisture on longitudinal stress-wave velocity (SWV), bending stiffness. and bending strength of commercial oriented strandboard, plywood. particleboard. and southern pine lumber was evaluated. It was shown that the stress-wave verocity decreased in general with increases in panel moisture content (MC). At a given MC level. SWV varied with panel type and...

Effects of moisture, elevated temperature, and fatigue loading on the behavior of graphite/epoxy buffer strip panels with center cracks

NASA Technical Reports Server (NTRS)

Bigelow, C. A.

1988-01-01

The effects of fatigue loading combined with moisture and heat on the behavior of graphite epoxy panels with either Kevlar-49 or S-glass buffer strips were studied. Buffer strip panels, that had a slit in the center to represent damage, were moisture conditioned or heated, fatigue loaded, and then tested in tension to measure their residual strength. The buffer strips were parallel to the loading direction and were made by replacing narrow strips of the 0 deg graphite plies with Kevlar-49 epoxy or S-glass epoxy on a 1-for-1 basis. The panels were subjected to a fatigue loading spectrum. One group of panels was preconditioned by soaking in 60 C water to produce a 1 percent weight gain then tested at room temperature. One group was heated to 82 C during the fatigue loading. Another group was moisture conditioned and then tested at 82 C. The residual strengths of the buffer panels were not highly affected by the fatigue loading, the number of repetitions of the loading spectrum, or the maximum strain level. The moisture conditioning reduced the residual strengths of the S-glass buffer strip panel by 10 to 15 percent below the ambient results. The moisture conditioning did not have a large effect on the Kevlar-49 panels.

Suomi-NPP VIIRS Solar Diffuser Stability Monitor Performance

NASA Technical Reports Server (NTRS)

Fulbright, Jon; Lei, Ning; Efremova, Boryana; Xiong, Xiaoxiong

2015-01-01

When illuminated by the Sun, the onboard solar diffuser (SD) panel provides a known spectral radiance source to calibrate the reflective solar bands of the Visible Infrared Imaging Radiometer Suite on the Suomi-NPP satellite. The SD bidirectional reflectance distribution function (BRDF) degrades over time due to solar exposure, and this degradation is measured using the SD stability monitor (SDSM). The SDSM acts as a ratioing radiometer, comparing solar irradiance measurements off the SD panel to those from a direct Sun view. We discuss the design and operations of the SDSM, the SDSM data analysis, including improvements incorporated since launch, and present the results through 1000 days after launch. After 1000 days, the band-dependent H-factors, a quantity describing the relative degradation of the BRDF of the SD panel since launch, range from 0.716 at 412 nanometers to 0.989 at 926 nanometers. The random uncertainty of these H-factors is about 0.1 percent, which is confirmed by the similar standard deviation values computed from the residuals of quadratic exponential fits to the H-factor time trends. The SDSM detector gains have temperature sensitivity of up to about 0.36 percent per kelvin, but this does not affect the derived H-factors. An initial error in the solar vector caused a seasonal bias to the H-factors of up to 0.5 percent. The total exposure of the SD panel to UV light after 1000 orbits is equivalent to about 100 hours of direct sunlight illumination perpendicular to the SD panel surface.

Experimental Design for the Evaluation of Detection Techniques of Hidden Corrosion Beneath the Thermal Protective System of the Space Shuttle Orbiter

NASA Technical Reports Server (NTRS)

Kemmerer, Catherine C.; Jacoby, Joseph A.; Lomness, Janice K.; Hintze, Paul E.; Russell, Richard W.

2007-01-01

The detection of corrosion beneath Space Shuttle Orbiter thermal protective system is traditionally accomplished by removing the Reusable Surface Insulation tiles and performing a visual inspection of the aluminum substrate and corrosion protection system. This process is time consuming and has the potential to damage high cost tiles. To evaluate non-intrusive NDE methods, a Proof of Concept (PoC) experiment was designed and test panels were manufactured. The objective of the test plan was three-fold: establish the ability to detect corrosion hidden from view by tiles; determine the key factor affecting detectability; roughly quantify the detection threshold. The plan consisted of artificially inducing dimensionally controlled corrosion spots in two panels and rebonding tile over the spots to model the thermal protective system of the orbiter. The corrosion spot diameter ranged from 0.100" to 0.600" inches and the depth ranged from 0.003" to 0.020". One panel consisted of a complete factorial array of corrosion spots with and without tile coverage. The second panel consisted of randomized factorial points replicated and hidden by tile. Conventional methods such as ultrasonics, infrared, eddy current and microwave methods have shortcomings. Ultrasonics and IR cannot sufficiently penetrate the tiles, while eddy current and microwaves have inadequate resolution. As such, the panels were interrogated using Backscatter Radiography and Terahertz Imaging. The terahertz system successfully detected artificially induced corrosion spots under orbiter tile and functional testing is in-work in preparation for implementation.

Analysis and Tests of Reinforced Carbon-Epoxy/Foam-Core Sandwich Panels with Cutouts

NASA Technical Reports Server (NTRS)

Baker, Donald J.; Rogers, Charles

1996-01-01

The results of a study of a low-cost structurally efficient minimum-gage shear-panel design that can be used in light helicopters are presented. The shear-panel design is based on an integrally stiffened syntactic-foam stabilized-skin with an all-bias-ply tape construction for stabilized-skin concept with an all-bias-ply tape construction for the skins. This sandwich concept is an economical way to increase the panel bending stiffness weight penalty. The panels considered in the study were designed to be buckling resistant up to 100 lbs/in. of shear load and to have an ultimate strength of 300 lbs/in. The panel concept uses unidirectional carbon-epoxy tape on a syntactic adhesive as a stiffener that is co-cured with the skin and is an effective concept for improving panel buckling strength. The panel concept also uses pultruded carbon-epoxy rods embedded in a syntactic adhesive and over-wrapped with a bias-ply carbon-epoxy tape to form a reinforcing beam which is an effective method for redistributing load around rectangular cutout. The buckling strength of the reinforced panels is 83 to 90 percent of the predicted buckling strength based on a linear buckling analysis. The maximum experimental deflection exceeds the maximum deflection predicted by a nonlinear analysis by approximately one panel thickness. The failure strength of the reinforced panels was two and a half to seven times of the buckling strength. This efficient shear-panel design concept exceeds the required ultimate strength requirement of 300 lbs/in by more than 100 percent.

Orbiter radiator panel solar focusing test

NASA Technical Reports Server (NTRS)

Howell, H. R.; Rankin, J. G.

1983-01-01

Test data are presented which define the area around the Orbiter radiator panels for which the solar reflections are concentrated to one-sun or more. The concave shape of the panels and their specular silver/Teflon coating causes focusing of the reflected solar energy which could have adverse heating effects on equipment or astronaut extravehicular activity (EVA) in the vicinity of the radiator panels. A room ambient test method was utilized with a one-tenth scale model of the radiator panels.

Evaluation of the thermal and structural performance of straw bale construction

NASA Astrophysics Data System (ADS)

Beaudry, Kyle R.

This thesis is primarily divided into two distinct experimental programs evaluating: 1) the thermal performance and, 2) the structural performance of straw bale construction. The thermal performance chapter describes hot-box testing (based on ASTM C1363-11) of seven straw bale wall panels to obtain their apparent thermal conductivity values. All panels were constructed with stacked bales and cement-lime plaster skins on each side of the bales. Four panels were made with traditional, 2-string field bales of densities ranging from 89.5 kg/m3 - 131 kg/m3 and with the bales on-edge (fibres perpendicular to the heat flow). Three panels were made with manufactured high-density bales (291 kg/m3 - 372 kg/m3). The fibres of the manufactured bales were randomly oriented. The key conclusion of this work is that within the experimental error, there is no difference in the apparent thermal conductivity value for panels using normal density bales and manufactured high-density bales up to a density of 333 kg/m3. The structural performance chapter describes gravity and transverse load testing (based on ASTM E72-15) of non-plastered modular straw bale wall (DBW) panels to evaluate their strength capacity and failure modes. The out-of-plane flexural (OPF) tests exhibited a mean ultimate bending moment of 49.7 kNm. The axial compression (AC) tests exhibited a mean ultimate line load of 161.0 kN/m. The local flexural header beam (HP) tests exhibited an ultimate line load of 31.6 kN/m. The OPF and AC capacities of the DBW exceeded the capacities exhibited by a conventional 38 mm x 140 mm stud wall. However, the DBW's header beam strength and stiffness was inferior to conventional stud wall.

Effects of fatigue and environment on residual strengths of center-cracked graphite/epoxy buffer strip panels

NASA Technical Reports Server (NTRS)

Bigelow, Catherine A.

1989-01-01

The effects of fatigue, moisture conditioning, and heating on the residual tension strengths of center-cracked graphite/epoxy buffer strip panels were evaluated using specimens made with T300/5208 graphite epoxy in a 16-ply quasi-isotropic layup, with two different buffer strip materials, Kevlar-49 or S-glass. It was found that, for panels subjected to fatigue loading, the residual strengths were not significantly affected by the fatigue loading, the number of repetitions of the loading spectrum, or the maximum strain level. The moisture conditioning reduced the residual strengths of the S-glass buffer strip panels by 10 to 15 percent below the ambient results, but increased the residual strengths of the Kevlar-49 buffer strip panels slightly. For both buffer strip materials, the heat increased the residual strengths of the buffer strip panels slightly over the ambient results.

Drapery assembly including insulated drapery liner

DOEpatents

Cukierski, Gwendolyn

1983-01-01

A drapery assembly is disclosed for covering a framed wall opening, the assembly including drapery panels hung on a horizontal traverse rod, the rod having a pair of master slides and means for displacing the master slides between open and closed positions. A pair of insulating liner panels are positioned behind the drapery, the remote side edges of the liner panels being connected with the side portions of the opening frame, and the adjacent side edges of the liner panels being connected with a pair of vertically arranged center support members adapted for sliding movement longitudinally of a horizontal track member secured to the upper horizontal portion of the opening frame. Pivotally arranged brackets connect the center support members with the master slides of the traverse rod whereby movement of the master slides to effect opening and closing of the drapery panels effects simultaneous opening and closing of the liner panels.

Damage Characteristics and Residual Strength of Composite Sandwich Panels Impacted with and Without Compression Loading

NASA Technical Reports Server (NTRS)

McGowan, David M.; Ambur, Damodar R.

1998-01-01

The results of an experimental study of the impact damage characteristics and residual strength of composite sandwich panels impacted with and without a compression loading are presented. Results of impact damage screening tests conducted to identify the impact-energy levels at which damage initiates and at which barely visible impact damage occurs in the impacted facesheet are discussed. Parametric effects studied in these tests include the impactor diameter, dropped-weight versus airgun-launched impactors, and the effect of the location of the impact site with respect to the panel boundaries. Residual strength results of panels tested in compression after impact are presented and compared with results of panels that are subjected to a compressive preload prior to being impacted.

Sound-proof Sandwich Panel Design via Metamaterial Concept

NASA Astrophysics Data System (ADS)

Sui, Ni

Sandwich panels consisting of hollow core cells and two face-sheets bonded on both sides have been widely used as lightweight and strong structures in practical engineering applications, but with poor acoustic performance especially at low frequency regime. Basic sound-proof methods for the sandwich panel design are spontaneously categorized as sound insulation and sound absorption. Motivated by metamaterial concept, this dissertation presents two sandwich panel designs without sacrificing weight or size penalty: A lightweight yet sound-proof honeycomb acoustic metamateiral can be used as core material for honeycomb sandwich panels to block sound and break the mass law to realize minimum sound transmission; the other sandwich panel design is based on coupled Helmholtz resonators and can achieve perfect sound absorption without sound reflection. Based on the honeycomb sandwich panel, the mechanical properties of the honeycomb core structure were studied first. By incorporating a thin membrane on top of each honeycomb core, the traditional honeycomb core turns into honeycomb acoustic metamaterial. The basic theory for such kind of membrane-type acoustic metamaterial is demonstrated by a lumped model with infinite periodic oscillator system, and the negative dynamic effective mass density for clamped membrane is analyzed under the membrane resonance condition. Evanescent wave mode caused by negative dynamic effective mass density and impedance methods are utilized to interpret the physical phenomenon of honeycomb acoustic metamaterials at resonance. The honeycomb metamaterials can extraordinarily improve low-frequency sound transmission loss below the first resonant frequency of the membrane. The property of the membrane, the tension of the membrane and the numbers of attached membranes can impact the sound transmission loss, which are observed by numerical simulations and validated by experiments. The sandwich panel which incorporates the honeycomb metamateiral as the core material maintains the mechanical property and yields a sound transmission loss that is consistently greater than 50 dB at low frequencies. Furthermore, the absorption property of the proposed honeycomb sandwich panel was experimentally studied. The honeycomb sandwich panel shows an excellent sound absorbing performance at high frequencies by using reinforced glass fiber without adding too much mass. The effect of the panel size and the stiffness of the grid-like frame effect of the honeycomb sandwich structures on sound transmission are discussed lastly. For the second sound-proof sandwich panel design, each unit cell of the sandwich panel is replaced by a Helmholtz resonator by perforating a small hole on the top face sheet. A perfect sound absorber sandwich panel with coupled Helmholtz resonators is proposed by two types: single identical Helmholtz resonator in each unit cell and dual Helmholtz resonators with different orifices, arranged in each cell arranged periodically. The soundproof sandwich panel is modelled as a panel embedded in rigid panel and assumed as a semiinfinite space with hard boundary condition. The net/mutual impedance model is first proposed and derived by solving Kirchhoff-Helmholtz integral by using the Green's function. The thermal-viscous energy dissipation at the thermal boundary layer dominates the total energy consumed. Two types of perfect sound absorber sandwich panel are designed in the last part. Two theoretical methods: the average energy and the equivalent surface impedance method are used to predict sound absorption performance. The geometry for perfect sound absorber sandwich panel at a target frequency can be obtained when the all the Helmholtz resonators are at resonance and the surface impedance of the sandwich panel matches the air impedance. The bandwidth for the identical sandwich panel mainly depends on the neck radius. The absorptive property of the dual Helmholtz resonators type of sandwich panel is studied by investigating the coupling effects between HRs. The theoretical results can be verified by numerical simulations through finite element method. The absorption bandwidth can be tuned by incorporating more HRs in each unit cell. Both sound-proof sandwich panel designs possess extraordinary acoustic performance for noise reduction at low frequency range with sub-wavelength structures. The sound absorber panel design can also achieve broadband sound attenuation at low frequencies.

Single-larger-portion-size and dual-column nutrition labeling may help consumers make more healthful food choices.

PubMed

Lando, Amy M; Lo, Serena C

2013-02-01

The Food and Drug Administration is considering changes to the Nutrition Facts label to help consumers make more healthful choices. To examine the effects of modifications to the Nutrition Facts label on foods that can be listed as having 1 or 2 servings per container, but are reasonably consumed at a single eating occasion. Participants were randomly assigned to study conditions that varied on label format, product, and nutrition profile. Data were collected via an online consumer panel. Adults aged 18 years and older were recruited from Synovate's online household panel. Data were collected during August 2011. A total of 32,897 invitations were sent for a final sample of 9,493 interviews. Participants were randomly assigned to one of 10 label formats classified into three groups: listing 2 servings per container with a single column, listing 2 servings per container with a dual column, and listing a single serving per container. Within these groups there were versions that enlarged the font size for "calories," removed "calories from fat," and changed the wording for serving size declaration. The single product task measured product healthfulness, the amount of calories and various nutrients per serving and per container, and label perceptions. The product comparison task measured ability to identify the healthier product and the product with fewer calories per container and per serving. Analysis of covariance models with Tukey-Kramer tests were used. Covariates included general label use, age, sex, level of education, and race/ethnicity. Single-serving and dual-column formats performed better and scored higher on most outcome measures. For products that contain 2 servings but are customarily consumed at a single eating occasion, using a single-serving or dual-column labeling approach may help consumers make healthier food choices. Published by Elsevier Inc.

Gross regional domestic product estimation: Application of two-way unbalanced panel data models to economic growth in East Nusa Tenggara province

NASA Astrophysics Data System (ADS)

Wibowo, Wahyu; Sinu, Elisabeth B.; Setiawan

2017-03-01

The condition of East Nusa Tenggara Province which recently developed new districts can affect the number of information or data collected become unbalanced. One of the consequences of ignoring the data incompleteness is the estimator become not valid. Therefore, the analysis of unbalanced panel data is very crucial.The aim of this paper is to find the estimation of Gross Regional Domestic Product in East Nusa Tenggara Province using unbalanced panel data regression model for two-way error component which assume random effect model (REM). In this research, we employ Feasible Generalized Least Squares (FGLS) as regression coefficients estimation method. Since variance of the model is unknown, ANOVA method is considered to obtain the variance components in order to construct the variance-covariance matrix. The data used in this research is secondary data taken from Central Bureau of Statistics of East Nusa Tenggara Province in 21 districts period 2004-2013. The predictors are the number of labor over 15 years old (X1), electrification ratios (X2), and local revenues (X3) while Gross Regional Domestic Product based on constant price 2000 is the response (Y). The FGLS estimation result shows that the value of R2 is 80,539% and all the predictors chosen are significantly affect (α = 5%) the Gross Regional Domestic Product in all district of East Nusa Tenggara Province. Those variables are the number of labor over 15 years old (X1), electrification ratios (X2), and local revenues (X3) with 0,22986, 0,090476, and 0,14749 of elasticities, respectively.

Details of development of the resource for adults with asthma in the RAISIN (randomized trial of an asthma internet self-management intervention) study.

PubMed

Morrison, Deborah; Mair, Frances S; Chaudhuri, Rekha; McGee-Lennon, Marilyn; Thomas, Mike; Thomson, Neil C; Yardley, Lucy; Wyke, Sally

2015-07-28

Around 300 million people worldwide have asthma and prevalence is increasing. Self-management can be effective in improving a range of outcomes and is cost effective, but is underutilised as a treatment strategy. Supporting optimum self-management using digital technology shows promise, but how best to do this is not clear. We aimed to develop an evidence based, theory informed, online resource to support self-management in adults with asthma, called 'Living well with Asthma', as part of the RAISIN (Randomized Trial of an Asthma Internet Self-Management Intervention) study. We developed Living well with Asthma in two phases. Phase 1: A low fidelity prototype (paper-based) version of the website was developed iteratively through input from a multidisciplinary expert panel, empirical evidence from the literature, and potential end users via focus groups (adults with asthma and practice nurses). Implementation and behaviour change theories informed this process. Phase 2: The paper-based designs were converted to a website through an iterative user centred process. Adults with asthma (n = 10) took part in think aloud studies, discussing the paper based version, then the web-based version. Participants considered contents, layout, and navigation. Development was agile using feedback from the think aloud sessions immediately to inform design and subsequent think aloud sessions. Think aloud transcripts were also thematically analysed, further informing resource development. The website asked users to aim to be symptom free. Key behaviours targeted to achieve this include: optimising medication use (including inhaler technique); attending primary care asthma reviews; using asthma action plans; increasing physical activity levels; and stopping smoking. The website had 11 sections, plus email reminders, which promoted these behaviours. Feedback on the contents of the resource was mainly positive with most changes focussing on clarification of language, order of pages and usability issues mainly relating to navigation difficulties. Our multifaceted approach to online intervention development underpinned by theory, using evidence from the literature, co-designed with end users and a multidisciplinary panel has resulted in a resource which end users find relevant to their needs and easy to use. Living well with Asthma is undergoing evaluation within a randomized controlled trial.

Quantifying Uncertainties in N2O Emission Due to N Fertilizer Application in Cultivated Areas

PubMed Central

Philibert, Aurore; Loyce, Chantal; Makowski, David

2012-01-01

Nitrous oxide (N2O) is a greenhouse gas with a global warming potential approximately 298 times greater than that of CO2. In 2006, the Intergovernmental Panel on Climate Change (IPCC) estimated N2O emission due to synthetic and organic nitrogen (N) fertilization at 1% of applied N. We investigated the uncertainty on this estimated value, by fitting 13 different models to a published dataset including 985 N2O measurements. These models were characterized by (i) the presence or absence of the explanatory variable “applied N”, (ii) the function relating N2O emission to applied N (exponential or linear function), (iii) fixed or random background (i.e. in the absence of N application) N2O emission and (iv) fixed or random applied N effect. We calculated ranges of uncertainty on N2O emissions from a subset of these models, and compared them with the uncertainty ranges currently used in the IPCC-Tier 1 method. The exponential models outperformed the linear models, and models including one or two random effects outperformed those including fixed effects only. The use of an exponential function rather than a linear function has an important practical consequence: the emission factor is not constant and increases as a function of applied N. Emission factors estimated using the exponential function were lower than 1% when the amount of N applied was below 160 kg N ha−1. Our uncertainty analysis shows that the uncertainty range currently used by the IPCC-Tier 1 method could be reduced. PMID:23226430

Effects of post heat-treatment on surface characteristics and adhesive bonding performance of medium density fiberboard

Treesearch

Nadir Ayrilimis; Jerrold E. Winandy

2009-01-01

A series of commercially manufactured medium density fiberboard (MDF) panels were exposed to a post-manufacture heat-treatment at various temperatures and durations using a hot press and just enough pressure to ensure firm contact between the panel and the press platens. Post-manufacture heat-treatment improved surface roughness of the exterior MDF panels. Panels...

Media Panel: A Presentation of a Program. Report No. 4

ERIC Educational Resources Information Center

Rosengren, Karl Erik; Windahl, Swen

Media Panel is a research program directed toward media habits, causes and effects of TV use among children and adolescents, and viewer/media interaction in general. Results of this longitudinal study from 1970 to the present are presented in three sections focusing on the early work of the group, the preschool panel, and the primary school panel.…

Buckling and postbuckling of composite panels with cutouts subjected to combined edge shear and temperature change

NASA Technical Reports Server (NTRS)

Noor, Ahmed K.; Kim, Yong H.

1995-01-01

The results of a detailed study of the buckling and postbuckling responses of composite panels with central circular cutouts are presented. The panels are subjected to combined edge shear and temperature change. The panels are discretized by using a two-field degenerate solid element with each of the displacement components having a linear variation throughout the thickness of the panel. The fundamental unknowns consist of the average mechanical strains through the thickness and the displacement components. The effects of geometric nonlinearities and laminated anisotropic material behavior are included. The stability boundary, postbuckling response and the hierarchical sensitivity coefficients are evaluated. The hierarchical sensitivity coefficients measure the sensitivity of the buckling and postbuckling responses to variations in the panel stiffnesses, and the material properties of both the individual layers and the constituents (fibers and matrix). Numerical results are presented for composite panels with central circular cutouts subjected to combined edge shear and temperature change, showing the effects of variations in the hole diameter, laminate stacking sequence and fiber orientation, on the stability boundary and postbuckling response and their sensitivity to changes in the various panel parameters.

Effect of Facet Displacement on Radiation Field and Its Application for Panel Adjustment of Large Reflector Antenna

NASA Astrophysics Data System (ADS)

Wang, Wei; Lian, Peiyuan; Zhang, Shuxin; Xiang, Binbin; Xu, Qian

2017-05-01

Large reflector antennas are widely used in radars, satellite communication, radio astronomy, and so on. The rapid developments in these fields have created demands for development of better performance and higher surface accuracy. However, low accuracy and low efficiency are the common disadvantages for traditional panel alignment and adjustment. In order to improve the surface accuracy of large reflector antenna, a new method is presented to determinate panel adjustment values from far field pattern. Based on the method of Physical Optics (PO), the effect of panel facet displacement on radiation field value is derived. Then the linear system is constructed between panel adjustment vector and far field pattern. Using the method of Singular Value Decomposition (SVD), the adjustment value for all panel adjustors are obtained by solving the linear equations. An experiment is conducted on a 3.7 m reflector antenna with 12 segmented panels. The results of simulation and test are similar, which shows that the presented method is feasible. Moreover, the discussion about validation shows that the method can be used for many cases of reflector shape. The proposed research provides the instruction to adjust surface panels efficiently and accurately.

Dynamic Response and Optimal Design of Curved Metallic Sandwich Panels under Blast Loading

PubMed Central

Yang, Shu; Han, Shou-Hong; Lu, Zhen-Hua

2014-01-01

It is important to understand the effect of curvature on the blast response of curved structures so as to seek the optimal configurations of such structures with improved blast resistance. In this study, the dynamic response and protective performance of a type of curved metallic sandwich panel subjected to air blast loading were examined using LS-DYNA. The numerical methods were validated using experimental data in the literature. The curved panel consisted of an aluminum alloy outer face and a rolled homogeneous armour (RHA) steel inner face in addition to a closed-cell aluminum foam core. The results showed that the configuration of a “soft” outer face and a “hard” inner face worked well for the curved sandwich panel against air blast loading in terms of maximum deflection (MaxD) and energy absorption. The panel curvature was found to have a monotonic effect on the specific energy absorption (SEA) and a nonmonotonic effect on the MaxD of the panel. Based on artificial neural network (ANN) metamodels, multiobjective optimization designs of the panel were carried out. The optimization results revealed the trade-off relationships between the blast-resistant and the lightweight objectives and showed the great use of Pareto front in such design circumstances. PMID:25126606

Dynamic response and optimal design of curved metallic sandwich panels under blast loading.

PubMed

Qi, Chang; Yang, Shu; Yang, Li-Jun; Han, Shou-Hong; Lu, Zhen-Hua

2014-01-01

It is important to understand the effect of curvature on the blast response of curved structures so as to seek the optimal configurations of such structures with improved blast resistance. In this study, the dynamic response and protective performance of a type of curved metallic sandwich panel subjected to air blast loading were examined using LS-DYNA. The numerical methods were validated using experimental data in the literature. The curved panel consisted of an aluminum alloy outer face and a rolled homogeneous armour (RHA) steel inner face in addition to a closed-cell aluminum foam core. The results showed that the configuration of a "soft" outer face and a "hard" inner face worked well for the curved sandwich panel against air blast loading in terms of maximum deflection (MaxD) and energy absorption. The panel curvature was found to have a monotonic effect on the specific energy absorption (SEA) and a nonmonotonic effect on the MaxD of the panel. Based on artificial neural network (ANN) metamodels, multiobjective optimization designs of the panel were carried out. The optimization results revealed the trade-off relationships between the blast-resistant and the lightweight objectives and showed the great use of Pareto front in such design circumstances.

Uncertainties in predicting solar panel power output

NASA Technical Reports Server (NTRS)

Anspaugh, B.

1974-01-01

The problem of calculating solar panel power output at launch and during a space mission is considered. The major sources of uncertainty and error in predicting the post launch electrical performance of the panel are considered. A general discussion of error analysis is given. Examples of uncertainty calculations are included. A general method of calculating the effect on the panel of various degrading environments is presented, with references supplied for specific methods. A technique for sizing a solar panel for a required mission power profile is developed.

Atomic Oxygen Erosion of EVA-Stranded Soft-Goods on the ISS

NASA Technical Reports Server (NTRS)

Alred, John W.

2017-01-01

This paper presents the results of an analysis to calculate the cumulative, effective atomic oxygen (AO) flux impinging on short-duration EVA tethers used to secure panel NOD1/C2-02 and panel LAB/C2-03. Shadowing from the ram reduces the AO flux on much of the Node 1 panel. On the Lab panel, the tethers are essentially in the ram flux. Table 1 summarizes the results of the analysis for Node 1 and the US Lab panels.

[Child malnutrition, infrastructure and income in Mexico].

PubMed

Ayala-Gaytán, Edgardo A; Díaz Durán-Hernández, Andrea

2015-01-01

Explain the variation in child malnutrition (CM), understood as low height for age (0 to 5 years old) for the period 1999-2006. State estimations of child malnutrition and several indicators of subjacent probable causes of CM were employed, such as poverty indices, state product per capita, women scholar attainment and access to health and the sewage system. Panel data regression analysis with fixed and random effects were used to analyze the data. The results indicate that the lack to access to health and sewage systems and poverty worsen CM, whereas women education helps to diminish CM. The study shows that infrastructure variables explain a significant part of the recent variation in DI across Mexican states, and that economic growth is not a sufficient condition to diminish DI.

Do Working Conditions at Older Ages Shape the Health Gradient?

PubMed Central

Schmitz, Lauren L.

2016-01-01

This study examines whether working conditions at the end of workers’ careers impact health and contribute to health disparities across occupations. A dynamic panel correlated random effects model is used in conjunction with a rich data set that combines information from the Health and Retirement Study (HRS), expert ratings of job demands from the Occupational Information Network (O*NET), and mid-career earnings records from the Social Security Administration’s (SSA) Master Earnings File (MEF). Results reveal a strong relationship between positive aspects of the psychosocial work environment and improved self-reported health status, blood pressure, and cognitive function. However, there is little evidence to suggest that working conditions shape observed health disparities between occupations in the years leading up to retirement. PMID:27814483

Recommendations of the Panel on Cost-effectiveness in Health and Medicine.

PubMed

Weinstein, M C; Siegel, J E; Gold, M R; Kamlet, M S; Russell, L B

1996-10-16

To develop consensus-based recommendations for the conduct of cost-effectiveness analysis (CEA). This article, the second in a 3-part series, describes the basis for recommendations constituting the reference case analysis, the set of practices developed to guide CEAs that inform societal resource allocation decisions, and the content of these recommendations. The Panel on Cost-Effectiveness in Health and Medicine, a nonfederal panel with expertise in CEA, clinical medicine, ethics, and health outcomes measurement, was convened by the US Public Health Service (PHS). The panel reviewed the theoretical foundations of CEA, current practices, and alternative methods used in analyses. Recommendations were developed on the basis of theory where possible, but tempered by ethical and pragmatic considerations, as well as the needs of users. The panel developed recommendations through 2 1/2 years of discussions. Comments on preliminary drafts prepared by panel working groups were solicited from federal government methodologists, health agency officials, and academic methodologists. The panel's methodological recommendations address (1) components belonging in the numerator and denominator of a cost-effectiveness (C/E) ratio; (2) measuring resource use in the numerator of a C/E ratio; (3) valuing health consequences in the denominator of a C/E ratio; (4) estimating effectiveness of interventions; (5) incorporating time preference and discounting; and (6) handling uncertainty. Recommendations are subject to the ¿rule of reason,¿ balancing the burden engendered by a practice with its importance to a study. If researchers follow a standard set of methods in CEA, the quality and comparability of studies, and their ultimate utility, can be much improved.

Information and College Decisions: Evidence from the Texas GO Center Project

ERIC Educational Resources Information Center

Cunha, Jesse M.; Miller, Trey; Weisburst, Emily

2018-01-01

We study GO Centers, a college information program that is run by student peers and provides information about all aspects of the college-going process to academically prepared students on the margin of attending college. We use the semi-random rollout of the program along with detailed panel data on the universe of Texas public school students to…

Community Policing: A Preliminary Assessment of Environmental Impact with Panel Data on Program Implementation in U.S. Cities

ERIC Educational Resources Information Center

He, Ni; Zhao, Jihong; Lovrich, Nicholas P.

2005-01-01

This article examines the environmental impact on the programmatic implementation of community-oriented policing (COP) in large municipal police agencies during the 1990s. Three waves of nationwide surveys (1993, 1996, and 2000) based on a random sample of 281 municipalities and the corresponding police agencies were used for our analysis. Based…

Parental Empowerment in Mexico: Randomized Experiment of the "Apoyos a La Gestion Escolar (Age)" Program in Rural Primary Schools in Mexico

ERIC Educational Resources Information Center

Gertler, Paul; Patrinos, Harry Anthony; Rodriguez-Oreggia, Eduardo

2012-01-01

Previous evaluations from Mexico are limited. The urban school-based management program, Programa Escuelas de Calidad (PEC), was analyzed using panel data regression analysis and propensity score matching. Participation in PEC is found to lead to decreases in dropout, failure and repetition rates. An evaluation of the rural parental empowerment…

Compressive and shear buckling analysis of metal matrix composite sandwich panels under different thermal environments

NASA Technical Reports Server (NTRS)

Ko, William L.; Jackson, Raymond H.

1993-01-01

Combined inplane compressive and shear buckling analysis was conducted on flat rectangular sandwich panels using the Raleigh-Ritz minimum energy method with a consideration of transverse shear effect of the sandwich core. The sandwich panels were fabricated with titanium honeycomb core and laminated metal matrix composite face sheets. The results show that slightly slender (along unidirectional compressive loading axis) rectangular sandwich panels have the most desirable stiffness-to-weight ratios for aerospace structural applications; the degradation of buckling strength of sandwich panels with rising temperature is faster in shear than in compression; and the fiber orientation of the face sheets for optimum combined-load buckling strength of sandwich panels is a strong function of both loading condition and panel aspect ratio. Under the same specific weight and panel aspect ratio, a sandwich panel with metal matrix composite face sheets has much higher buckling strength than one having monolithic face sheets.

Toxicity of chromated copper arsenate (CCA)-treated wood to non-target marine fouling communities in Langstone Harbour, Portsmouth, UK.

PubMed

Brown, C J; Eaton, R A

2001-04-01

The effect of the anti-marine-borer timber preservative chromated copper arsenate (CCA) (a pressure impregnated solution of copper, chromium and arsenic compounds) on non-target marine fouling animals was investigated during a subtidal exposure trial. Panels of Scots pine treated to target retentions of 12, 24 and 48 kg CCA per m-3 of wood, plus untreated controls were submerged at a coastal site on the south coast of the UK for 6, 12 and 18 months. After each exposure period the fouling communities that formed on the surface of panels were assessed both qualitatively and quantitatively. Community structure was similar on panels treated to the three CCA loadings, but was significantly different from community structure on untreated panels. The total number of species (species richness) was similar on all panels, although the number of individual organisms attached to the surface of panels was significantly higher on CCA-treated panels than on untreated panels. k-dominance curves revealed that the difference in numbers of individuals between CCA-treated and untreated panels was caused by higher numbers of the dominant species (Elminius modestus, Hydroides ezoensis, and Electra pilosa) on CCA-treated panels. Other species were present in similar numbers on panels of all treatments. Results indicate that there are no detrimental toxic effects to epibiota caused by the presence of CCA preservative within the matrix of the wood at any of the treatment levels. Differences in community structure between CCA-treated and untreated panels may be due to enhanced larval settlement on CCA-treated timber by some species as a result of modifications to the surface properties of the timber by the CCA preservative.

Optimization of composite sandwich cover panels subjected to compressive loadings

NASA Technical Reports Server (NTRS)

Cruz, Juan R.

1991-01-01

An analysis and design method is presented for the design of composite sandwich cover panels that include the transverse shear effects and damage tolerance considerations. This method is incorporated into a sandwich optimization computer program entitled SANDOP. As a demonstration of its capabilities, SANDOP is used in the present study to design optimized composite sandwich cover panels for for transport aircraft wing applications. The results of this design study indicate that optimized composite sandwich cover panels have approximately the same structural efficiency as stiffened composite cover panels designed to satisfy individual constraints. The results also indicate that inplane stiffness requirements have a large effect on the weight of these composite sandwich cover panels at higher load levels. Increasing the maximum allowable strain and the upper percentage limit of the 0 degree and +/- 45 degree plies can yield significant weight savings. The results show that the structural efficiency of these optimized composite sandwich cover panels is relatively insensitive to changes in core density. Thus, core density should be chosen by criteria other than minimum weight (e.g., damage tolerance, ease of manufacture, etc.).

A pilot Internet "Value of Health" Panel: recruitment, participation and compliance

PubMed Central

Stein, Ken; Dyer, Matthew; Crabb, Tania; Milne, Ruairidh; Round, Alison; Ratcliffe, Julie; Brazier, John

2006-01-01

Objectives To pilot using a panel of members of the public to provide preference data via the Internet Methods A stratified random sample of members of the general public was recruited and familiarised with the standard gamble procedure using an Internet based tool. Health states were perdiodically presented in "sets" corresponding to different conditions, during the study. The following were described: Recruitment (proportion of people approached who were trained); Participation (a) the proportion of people trained who provided any preferences and (b) the proportion of panel members who contributed to each "set" of values; and Compliance (the proportion, per participant, of preference tasks which were completed). The influence of covariates on these outcomes was investigated using univariate and multivariate analyses. Results A panel of 112 people was recruited. 23% of those approached (n = 5,320) responded to the invitation, and 24% of respondents (n = 1,215) were willing to participate (net = 5.5%). However, eventual recruitment rates, following training, were low (2.1% of those approached). Recruitment from areas of high socioeconomic deprivation and among ethnic minority communities was low. Eighteen sets of health state descriptions were considered over 14 months. 74% of panel members carried out at least one valuation task. People from areas of higher socioeconomic deprivation and unmarried people were less likely to participate. An average of 41% of panel members expressed preferences on each set of descriptions. Compliance ranged from 3% to 100%. Conclusion It is feasible to establish a panel of members of the general public to express preferences on a wide range of health state descriptions using the Internet, although differential recruitment and attrition are important challenges. Particular attention to recruitment and retention in areas of high socioeconomic deprivation and among ethnic minority communities is necessary. Nevertheless, the panel approach to preference measurement using the Internet offers the potential to provide specific utility data in a responsive manner for use in economic evaluations and to address some of the outstanding methodological uncertainties in this field. PMID:17129380

Skin, Stringer, and Fastener Loads in Buckled Fuselage Panels

NASA Technical Reports Server (NTRS)

Young, Richard D.; Rose, Cheryl A.; Starnes, James H., Jr.

2001-01-01

The results of a numerical study to assess the effect of skin buckling on the internal load distribution in a stiffened fuselage panel, with and without longitudinal cracks, are presented. In addition, the impact of changes in the internal loads on the fatigue life and residual strength of a fuselage panel is assessed. A generic narrow-body fuselage panel is considered. The entire panel is modeled using shell elements and considerable detail is included to represent the geometric-nonlinear response of the buckled skin, cross section deformation of the stiffening components, and details of the skin-string attachment with discrete fasteners. Results are presented for a fixed internal pressure and various combinations of axial tension or compression loads. Results illustrating the effect of skin buckling on the stress distribution in the skin and stringer, and fastener loads are presented. Results are presented for the pristine structure, and for cases where damage is introduced in the form of a longitudinal crack adjacent to the stringer, or failed fastener elements. The results indicate that axial compression loads and skin buckling can have a significant effect on the circumferential stress in the skin, and fastener loads, which will influence damage initiation, and a comparable effect on stress intensity factors for cases with cracks. The effects on stress intensity factors will influence damage propagation rates and the residual strength of the panel.

Flight service evaluation of composite helicopter components

NASA Technical Reports Server (NTRS)

Rich, M. J.; Lowry, D. W.

1985-01-01

An assessment of composite helicopter structures, exposed to environmental effects, after four years of commercial service is presented. This assessment is supported by test results of helicopter components and test panels which have been exposed to environmental effects since late 1979. Full scale static and fatigue tests are being conducted on composite components obtained from S-76 helicopters in commercial operations in the Gulf Coast region of Louisiana. Small scale tests are being conducted on coupons obtained from panels being exposed to outdoor conditions in Stratford, Connecticut and West Palm Beach, Florida. The panel layups represent S-76 components. Moisture evaluations and strength tests are being conducted, on the S-76 components and panels, over a period of eight years. Results are discussed for components and panels with up to four years of exposure.

Exit, Voice, and Suffering: Do Couples Adapt to Changing Employment Patterns?

ERIC Educational Resources Information Center

Gershuny, Jonathan; Bittman, Michael; Brice, John

2005-01-01

What is the long-term effect of the emerging predominance of the dual-earner family? This study uses data from 3 national household panel surveys-the British Household Panel Survey (N= 16,044), the German Socioeconomic Panel (N= 14,164), and the U.S. Panel Study of Income Dynamics (N= 7,423)which provide, for the first time, clear and direct…

Comparing Dropout Predictors for Two State-Level Panels Using Grade 6 and Grade 8 Data

ERIC Educational Resources Information Center

Franklin, Bobby J.; Trouard, Stephen B.

2016-01-01

The purpose of this study was to examine the effectiveness of dropout predictors across time. Two state-level high school graduation panels were selected to begin with the seventh and ninth grades but end at the same time. The first panel (seventh grade) contained 29,554 students and used sixth grade predictors. The second panel (ninth grade)…

Efficacy of transfusion with granulocytes from G-CSF/dexamethasone–treated donors in neutropenic patients with infection

PubMed Central

Boeckh, Michael; Harrison, Ryan W.; McCullough, Jeffrey; Ness, Paul M.; Strauss, Ronald G.; Nichols, W. Garrett; Hamza, Taye H.; Cushing, Melissa M.; King, Karen E.; Young, Jo-Anne H.; Williams, Eliot; McFarland, Janice; Holter Chakrabarty, Jennifer; Sloan, Steven R.; Friedman, David; Parekh, Samir; Sachais, Bruce S.; Kiss, Joseph E.; Assmann, Susan F.

2015-01-01

High-dose granulocyte transfusion therapy has been available for 20 years, yet its clinical efficacy has never been conclusively demonstrated. We report here the results of RING (Resolving Infection in Neutropenia with Granulocytes), a multicenter randomized controlled trial designed to address this question. Eligible subjects were those with neutropenia (absolute neutrophil count <500/μL) and proven/probable/presumed infection. Subjects were randomized to receive either (1) standard antimicrobial therapy or (2) standard antimicrobial therapy plus daily granulocyte transfusions from donors stimulated with granulocyte colony-stimulating factor (G-CSF) and dexamethasone. The primary end point was a composite of survival plus microbial response, at 42 days after randomization. Microbial response was determined by a blinded adjudication panel. Fifty-six subjects were randomized to the granulocyte arm and 58 to the control arm. Transfused subjects received a median of 5 transfusions. Mean transfusion dose was 54.9 × 109 granulocytes. Overall success rates were 42% and 43% for the granulocyte and control groups, respectively (P > .99), and 49% and 41%, respectively, for subjects who received their assigned treatments (P = .64). Success rates for granulocyte and control arms did not differ within any infection type. In a post hoc analysis, subjects who received an average dose per transfusion of ≥0.6 × 109 granulocytes per kilogram tended to have better outcomes than those receiving a lower dose. In conclusion, there was no overall effect of granulocyte transfusion on the primary outcome, but because enrollment was half that planned, power to detect a true beneficial effect was low. RING was registered at www.clinicaltrials.gov as #NCT00627393. PMID:26333778

Space Station Freedom solar array panels plasma interaction test facility

NASA Technical Reports Server (NTRS)

Martin, Donald F.; Mellott, Kenneth D.

1989-01-01

The Space Station Freedom Power System will make extensive use of photovoltaic (PV) power generation. The phase 1 power system consists of two PV power modules each capable of delivering 37.5 KW of conditioned power to the user. Each PV module consists of two solar arrays. Each solar array is made up of two solar blankets. Each solar blanket contains 82 PV panels. The PV power modules provide a 160 V nominal operating voltage. Previous research has shown that there are electrical interactions between a plasma environment and a photovoltaic power source. The interactions take two forms: parasitic current loss (occurs when the currect produced by the PV panel leaves at a high potential point and travels through the plasma to a lower potential point, effectively shorting that portion of the PV panel); and arcing (occurs when the PV panel electrically discharges into the plasma). The PV solar array panel plasma interaction test was conceived to evaluate the effects of these interactions on the Space Station Freedom type PV panels as well as to conduct further research. The test article consists of two active solar array panels in series. Each panel consists of two hundred 8 cm x 8 cm silicon solar cells. The test requirements dictated specifications in the following areas: plasma environment/plasma sheath; outgassing; thermal requirements; solar simulation; and data collection requirements.

Estimation of the Thermal Process in the Honeycomb Panel by a Monte Carlo Method

NASA Astrophysics Data System (ADS)

Gusev, S. A.; Nikolaev, V. N.

2018-01-01

A new Monte Carlo method for estimating the thermal state of the heat insulation containing honeycomb panels is proposed in the paper. The heat transfer in the honeycomb panel is described by a boundary value problem for a parabolic equation with discontinuous diffusion coefficient and boundary conditions of the third kind. To obtain an approximate solution, it is proposed to use the smoothing of the diffusion coefficient. After that, the obtained problem is solved on the basis of the probability representation. The probability representation is the expectation of the functional of the diffusion process corresponding to the boundary value problem. The process of solving the problem is reduced to numerical statistical modelling of a large number of trajectories of the diffusion process corresponding to the parabolic problem. It was used earlier the Euler method for this object, but that requires a large computational effort. In this paper the method is modified by using combination of the Euler and the random walk on moving spheres methods. The new approach allows us to significantly reduce the computation costs.

AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 34th and AIAA/ASME Adaptive Structures Forum, La Jolla, CA, Apr. 19-22, 1993, Technical Papers. Pts. 1-6

NASA Astrophysics Data System (ADS)

Topics addressed include the prediction of helicopter component loads using neural networks, spacecraft on-orbit coupled loads analysis, hypersonic flutter of a curved shallow panel with aerodynamic heating, thermal-acoustic fatigue of ceramic matrix composite materials, transition elements based on transfinite interpolation, damage progression in stiffened composite panels, a direct treatment of min-max dynamic response optimization problems, and sources of helicopter rotor hub inplane shears. Also discussed are dynamics of a layered elastic system, confidence bounds on structural reliability, mixed triangular space-time finite elements, advanced transparency development for USAF aircraft, a low-velocity impact on a graphite/PEEK, an automated mode-tracking strategy, transonic flutter suppression by a passive flap, a nonlinear response of composite panels to random excitation, an optimal placement of elastic supports on a simply supported plate, a probabilistic assessment of composite structures, a model for mode I failure of laminated composites, a residual flexibility approach to multibody dynamics,and multilayer piezoelectric actuators.

Pixel electronic noise as a function of position in an active matrix flat panel imaging array

NASA Astrophysics Data System (ADS)

Yazdandoost, Mohammad Y.; Wu, Dali; Karim, Karim S.

2010-04-01

We present an analysis of output referred pixel electronic noise as a function of position in the active matrix array for both active and passive pixel architectures. Three different noise sources for Active Pixel Sensor (APS) arrays are considered: readout period noise, reset period noise and leakage current noise of the reset TFT during readout. For the state-of-the-art Passive Pixel Sensor (PPS) array, the readout noise of the TFT switch is considered. Measured noise results are obtained by modeling the array connections with RC ladders on a small in-house fabricated prototype. The results indicate that the pixels in the rows located in the middle part of the array have less random electronic noise at the output of the off-panel charge amplifier compared to the ones in rows at the two edges of the array. These results can help optimize for clearer images as well as help define the region-of-interest with the best signal-to-noise ratio in an active matrix digital flat panel imaging array.

Multi-sectorial convergence in greenhouse gas emissions.

PubMed

Oliveira, Guilherme de; Bourscheidt, Deise Maria

2017-07-01

This paper uses the World Input-Output Database (WIOD) to test the hypothesis of per capita convergence in greenhouse gas (GHG) emissions for a multi-sectorial panel of countries. The empirical strategy applies conventional estimators of random and fixed effects and Arellano and Bond's (1991) GMM to the main pollutants related to the greenhouse effect. For reasonable empirical specifications, the model revealed robust evidence of per capita convergence in CH 4 emissions in the agriculture, food, and services sectors. The evidence of convergence in CO 2 emissions was moderate in the following sectors: agriculture, food, non-durable goods manufacturing, and services. In all cases, the time for convergence was less than 15 years. Regarding emissions by energy use, the largest source of global warming, there was only moderate evidence in the extractive industry sector-all other pollutants presented little or no evidence. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Marriage Wealth Premium Revisited: Gender Disparities and Within-Individual Changes in Personal Wealth in Germany.

PubMed

Lersch, Philipp M

2017-06-01

This study examines the association between marriage and economic wealth of women and men. Going beyond previous research that focused on household wealth, I examine personal wealth, which allows identifying gender disparities in the association between marriage and wealth. Using unique data from the German Socio-Economic Panel Study (2002, 2007, and 2012), I apply random-effects and fixed-effects regression models to test my expectations. I find that both women and men experience substantial marriage wealth premiums not only in household wealth but also in personal wealth. However, I do not find consistent evidence for gender disparities in these general marriage premiums. Additional analyses indicate, however, that women's marriage premiums are substantially lower than men's premiums in older cohorts and when only nonhousing wealth is considered. Overall, this study provides new evidence that women and men gain unequally in their wealth attainment through marriage.

Design and development of polyphenylene oxide foam as a reusable internal insulation for LH2 tanks, phase 2

NASA Technical Reports Server (NTRS)

1972-01-01

PPO form was tested for mechanical strength, for the effects of 100 thermal cycles from 450 K (359 F) to 21 K (-423 F) and for gas flow resistance characteristics. PPO foam panels were investigated for density variations, methods for joining panels were studied and panel joint thermal test specimens were fabricated. The range of foam panel thickness under investigation was extended to include 7 mm (0.3 in) and 70 mm (2.8 in) panels which also were tested for thermal performance.

78 FR 26667 - Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-07

... first panel will examine issues in connection with the possibility of developing a credit rating assignment system. The second panel will discuss the effectiveness of the Commission's current system under.... The third panel will focus on other potential alternatives to the current issuer pay business model...

Investigation of Chinese text entry performance for mobile display interfaces.

PubMed

Lin, Po-Hung

2015-01-01

This study examined the effects of panel type, frequency of use and arrangement of phonetic symbols on operation time, usability, visual fatigue and workload in text entry performance. Three types of panel (solid, touch and mixed), three types of frequency of use (low, medium and high) and two types of the arrangement of phonetic symbols (vertical and horizontal) were investigated through 30 college students in the experiment. The results indicated that panel type, frequency of use, arrangement of phonetic symbols and the interaction between panel type and frequency of use were significant factors on operation time. Panel type was also a significant factor on usability, and a touch panel and a solid panel showed better usability than a mixed panel. Furthermore, a touch panel showed good usability and the lowest workload and therefore it is recommended to use a touch panel with vertical phonetic arrangement in sending Chinese text messages. Practitioner Summary: This study found, from ergonomics considerations, that a touch panel showed good usability and it is recommended to use a touch panel with vertical phonetic arrangement in sending Chinese text messages. Mobile display manufacturers can use the results of this study as a reference for future keyboard design.

A panel multinomial logit analysis of elderly living arrangements: evidence from Aging In Manitoba longitudinal data, Canada.

PubMed

Sarma, Sisira; Simpson, Wayne

2007-12-01

Utilizing a unique longitudinal survey linked with home care use data, this paper analyzes the determinants of elderly living arrangements in Manitoba, Canada using a random effects multinomial logit model that accounts for unobserved individual heterogeneity. Because current home ownership is potentially endogenous in a living arrangements choice model, we use prior home ownership as an instrument. We also use prior home care use as an instrument for home care and use a random coefficient framework to account for unobserved health status. After controlling for relevant socio-demographic factors and accounting for unobserved individual heterogeneity, we find that home care and home ownership reduce the probability of living in a nursing home. Consistent with previous studies, we find that age is a strong predictor of nursing home entry. We also find that married people, those who have lived longer in the same community, and those who are healthy are more likely to live independently and less likely to be institutionalized or to cohabit with individuals other than their spouse.

Color of low-fat cheese influences flavor perception and consumer liking.

PubMed

Wadhwani, R; McMahon, D J

2012-05-01

The present study examines the effect of color on low-fat cheese flavor perception and consumer acceptability. To understand the flavor preferences of the consumer population participating in the sensory testing, 4 brands of retail full-fat Cheddar cheeses labeled as mild, medium, or sharp were obtained. These cheeses were evaluated by a trained descriptive panel to generate a flavor profile for each cheese and then by consumer sensory panels. Overall and color liking were measured using a 9-point hedonic scale, and flavor, chewiness, level of sharpness measured using a 5-point just-about-right (JAR) scale (with 1 being not enough, 3 being just about right, and 5 being too much of the attribute). Subsequently, 9 low-fat Cheddar cheeses were manufactured using 3 levels of annatto (0, 7.34, and 22 g/100 kg) and 3 levels of titanium dioxide (0, 7.67, and 40 g/100 kg) using a randomized block design in duplicate. Cheeses were then evaluated by descriptive and consumer sensory panels. Each consumer testing consisted of 120 panelists who were mainly 18 to 35 yr of age (>90% of total populace) with >60% being frequent cheese consumers. Overall liking preference of the consumer group was for mild to medium cheese. Using the JAR scale, the medium cheeses were considered closest to JAR with a mean score of 3.0, compared with 2.4 for mild cheese and 3.6 for sharp cheese. Among low-fat cheeses, color was shown to be important with consumer liking being negatively influenced when the cheese appearance was too translucent (especially when normal levels of annatto were used) or too white. Matching the level of titanium dioxide with the annatto level gave the highest liking scores and flavor perception closest to JAR. This study established a significant effect of color on overall liking of low-fat versions of Cheddar cheese. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

A preliminary report on the effect of elevated temperature exposure on the mechanical properties of titanium-alloy honeycomb-core sandwich panels.

NASA Technical Reports Server (NTRS)

Bales, T. T.; Cain, R. L.

1971-01-01

A study has been initiated to determine the effects of elevated-temperature exposure on the room-temperature mechanical properties of titanium honeycomb-core sandwich panels fabricated by brazing or spot diffusion bonding. Only flatwise tensile properties following exposure have been determined to date. Preliminary results indicate very little change in the flatwise tensile strength of sandwich panels fabricated by spot diffusion bonding following exposures of 10,000 hr at 600 and 800 F and 1000 hr at 1000 F. Titanium panels fabricated by using a Ti-Zr-Be braze alloy are susceptible to oxidation at elevated temperature and experience flatwise tensile strength degradation after continuous exposures of 7500 hr at 600 F, 1000 hr at 800 F, and less than 100 hr at 1000 F. It is possible that the exposure life of the brazed panels may be substantially increased if the panel edges are sealed to prevent oxidation of the braze alloy.

Radiated Sound Power from a Curved Honeycomb Panel

NASA Technical Reports Server (NTRS)

Robinson, Jay H.; Buehrle, Ralph D.; Klos, Jacob; Grosveld, Ferdinand W.

2003-01-01

The validation of finite element and boundary element model for the vibro-acoustic response of a curved honeycomb core composite aircraft panel is completed. The finite element and boundary element models were previously validated separately. This validation process was hampered significantly by the method in which the panel was installed in the test facility. The fixture used was made primarily of fiberboard and the panel was held in a groove in the fiberboard by a compression fitting made of plastic tubing. The validated model is intended to be used to evaluate noise reduction concepts from both an experimental and analytic basis simultaneously. An initial parametric study of the influence of core thickness on the radiated sound power from this panel, using this numerical model was subsequently conducted. This study was significantly influenced by the presence of strong boundary condition effects but indicated that the radiated sound power from this panel was insensitive to core thickness primarily due to the offsetting effects of added mass and added stiffness in the frequency range investigated.

Effect of air flow, panel curvature, and internal pressurization on field-incidence transmission loss

NASA Technical Reports Server (NTRS)

Koval, L. R.

1976-01-01

In the context of sound transmission through aircraft fuselage panels, equations for the field-incidence transmission loss (TL) of a single-walled panel are derived that include the effects of external air flow, panel curvature, and internal fuselage pressurization. Flow is shown to provide a modest increase in TL that is uniform with frequency up to the critical frequency. The increase is about 2 dB at Mach number M = 0.5, and about 3.5 dB at M = 1. Above the critical frequency where TL is damping controlled, the increase can be slightly larger at certain frequencies. Curvature is found to stiffen the panel, thereby increasing the TL at low frequencies, but also to introduce a dip at the 'ring frequency' of a full cylinder having the same radius as the panel. Pressurization appears to produce a slight decrease in TL throughout the frequency range, and also slightly shifts the dips at the critical frequency and at the ring frequency.

Mechanical and thermal buckling analysis of sandwich panels under different edge conditions

NASA Technical Reports Server (NTRS)

Ko, William L.

1993-01-01

By using the Rayleigh-Ritz method of minimizing the total potential energy of a structural system, combined load (mechanical or thermal load) buckling equations are established for orthotropic rectangular sandwich panels supported under four different edge conditions. Two-dimensional buckling interaction curves and three dimensional buckling interaction surfaces are constructed for high-temperature honeycomb-core sandwich panels supported under four different edge conditions. The interaction surfaces provide easy comparison of the panel buckling strengths and the domains of symmetrical and antisymmetrical buckling associated with the different edge conditions. Thermal buckling curves of the sandwich panels also are presented. The thermal buckling conditions for the cases with and without thermal moments were found to be identical for the small deformation theory. In sandwich panels, the effect of transverse shear is quite large, and by neglecting the transverse shear effect, the buckling loads could be overpredicted considerably. Clamping of the edges could greatly increase buckling strength more in compression than in shear.

Pulsed differential holographic measurements of vibration modes of high temperature panels

NASA Technical Reports Server (NTRS)

Evensen, D. A.; Aprahamian, R.; Overoye, K. R.

1972-01-01

Holography is a lensless imaging technique which can be applied to measure static or dynamic displacements of structures. Conventional holography cannot be readily applied to measure vibration modes of high-temperature structures, due to difficulties caused by thermal convection currents. The present report discusses the use of pulsed differential holography, which is a technique for recording structural motions in the presence of random fluctuations such as turbulence. An analysis of the differential method is presented, and demonstration experiments were conducted using heated stainless steel plates. Vibration modes were successfully recorded for the heated plates at temperatures of 1000, 1600, and 2000 F. The technique appears promising for such future measurments as vibrations of the space shuttle TPS panels or recording flutter of aeroelastic models in a wind-tunnel.

Active control of sound radiation from a vibrating rectangular panel by sound sources and vibration inputs - An experimental comparison

NASA Technical Reports Server (NTRS)

Fuller, C. R.; Hansen, C. H.; Snyder, S. D.

1991-01-01

Active control of sound radiation from a rectangular panel by two different methods has been experimentally studied and compared. In the first method a single control force applied directly to the structure is used with a single error microphone located in the radiated acoustic field. Global attenuation of radiated sound was observed to occur by two main mechanisms. For 'on-resonance' excitation, the control force had the effect of increasing the total panel input impedance presented to the nosie source, thus reducing all radiated sound. For 'off-resonance' excitation, the control force tends not significantly to modify the panel total response amplitude but rather to restructure the relative phases of the modes leading to a more complex vibration pattern and a decrease in radiation efficiency. For acoustic control, the second method, the number of acoustic sources required for global reduction was seen to increase with panel modal order. The mechanism in this case was that the acoustic sources tended to create an inverse pressure distribution at the panel surface and thus 'unload' the panel by reducing the panel radiation impedance. In general, control by structural inputs appears more effective than control by acoustic sources for structurally radiated noise.

Panel positioning error and support mechanism for a 30-m THz radio telescope

NASA Astrophysics Data System (ADS)

Yang, De-Hua; Okoh, Daniel; Zhou, Guo-Hua; Li, Ai-Hua; Li, Guo-Ping; Cheng, Jing-Quan

2011-06-01

A 30-m TeraHertz (THz) radio telescope is proposed to operate at 200 μm with an active primary surface. This paper presents sensitivity analysis of active surface panel positioning errors with optical performance in terms of the Strehl ratio. Based on Ruze's surface error theory and using a Monte Carlo simulation, the effects of six rigid panel positioning errors, such as piston, tip, tilt, radial, azimuthal and twist displacements, were directly derived. The optical performance of the telescope was then evaluated using the standard Strehl ratio. We graphically illustrated the various panel error effects by presenting simulations of complete ensembles of full reflector surface errors for the six different rigid panel positioning errors. Study of the panel error sensitivity analysis revealed that the piston error and tilt/tip errors are dominant while the other rigid errors are much less important. Furthermore, as indicated by the results, we conceived of an alternative Master-Slave Concept-based (MSC-based) active surface by implementating a special Series-Parallel Concept-based (SPC-based) hexapod as the active panel support mechanism. A new 30-m active reflector based on the two concepts was demonstrated to achieve correction for all the six rigid panel positioning errors in an economically feasible way.

What Is Effectiveness? Panel Discussion.

ERIC Educational Resources Information Center

Zigmond, Naomi

Two papers are presented from a panel discussion moderated by Naomi Zigmond, who introduces the papers with a note on definitions and measures of intervention effectiveness. "Some Thoughts on Effective Intervention for Handicapped Preschoolers," by Phillip Strain, notes that special education researchers attempt to be efficient, economical,…

Ottawa panel evidence-based clinical practice guidelines for therapeutic exercises and manual therapy in the management of osteoarthritis.

PubMed

2005-09-01

Osteoarthritis (OA) affects a large and growing proportion of the population. The purpose of this project was to create guidelines for the use of therapeutic exercises and manual therapy in the management of adult patients (>18 years of age) with a diagnosis of OA. All stages of the disease were included in the analysis, and studies of patients who had recent surgery or other rheumatologic, musculoskeletal, or spinal problems or of subjects without known pathology or impairments were excluded. The Ottawa Methods Group used Cochrane Collaboration methods to find and synthesize evidence from comparative controlled trials and then asked stakeholder groups to nominate representatives to serve on a panel of experts. The Ottawa Panel agreed on criteria for grading the strength of the recommendations and their supporting evidence. Of the 609 potential articles on therapeutic exercises for OA that were identified, 113 were considered potentially relevant, and 26 randomized controlled trials and controlled clinical trials were ultimately used. Sixteen positive recommendations of clinical benefit were developed for therapeutic exercises, especially strengthening exercises and general physical activity, particularly for the management of pain and improvement of functional status. Manual therapy combined with exercises also is recommended in the management of patients with OA. The Ottawa Panel recommends the use of therapeutic exercises alone, or combined with manual therapy, for managing patients with OA. There were a total of 16 positive recommendations: 13 grade A and 3 grade C+. The Ottawa Panel recommends the use of therapeutic exercises because of the strong evidence (grades A, B, and C+) in the literature.

Smartphone mobile application delivering personalized, real-time sun protection advice: a randomized clinical trial.

PubMed

Buller, David B; Berwick, Marianne; Lantz, Kathy; Buller, Mary Klein; Shane, James; Kane, Ilima; Liu, Xia

2015-05-01

Mobile smartphones are rapidly emerging as an effective means of communicating with many Americans. Using mobile applications (apps), they can access remote databases, track time and location, and integrate user input to provide tailored health information. A smartphone mobile app providing personalized, real-time sun protection advice was evaluated in a randomized clinical trial. The trial was conducted in 2012 and had a randomized pretest-posttest controlled design with a 10-week follow-up. Data were collected from a nationwide population-based survey panel. A sample of 604 non-Hispanic and Hispanic adults from the Knowledge Panel 18 years or older who owned an Android smartphone were enrolled. The mobile app provided advice on sun protection (ie, protection practices and risk of sunburn) and alerts (to apply or reapply sunscreen and get out of the sun), hourly UV Index, and vitamin D production based on the forecast UV Index, the phone's time and location, and user input. Percentage of days using sun protection and time spent outdoors (days and minutes) in the midday sun and number of sunburns in the past 3 months were collected. Individuals in the treatment group reported more shade use (mean days staying in the shade, 41.0% vs 33.7%; P = .03) but less sunscreen use (mean days, 28.6% vs 34.5%; P = .048) than controls. There was no significant difference in number of sunburns in the past 3 months (mean, 0.60 in the treatment group vs 0.62 for controls; P = .87). Those who used the mobile app reported spending less time in the sun (mean days keeping time in the sun to a minimum, 60.4% for app users vs 49.3% for nonusers; P = .04) and using all protection behaviors combined more (mean days, 39.4% vs 33.8%; P = .04). The mobile app improved some sun protection. Use of the mobile app was lower than expected but associated with increased sun protection. Providing personalized advice when and where people are in the sun may help reduce sun exposure.

Flutter Sensitivity to Boundary Layer Thickness, Structural Damping, and Static Pressure Differential for a Shuttle Tile Overlay Repair Concept

NASA Technical Reports Server (NTRS)

Scott, Robert C.; Bartels, Robert E.

2009-01-01

This paper examines the aeroelastic stability of an on-orbit installable Space Shuttle patch panel. CFD flutter solutions were obtained for thick and thin boundary layers at a free stream Mach number of 2.0 and several Mach numbers near sonic speed. The effect of structural damping on these flutter solutions was also examined, and the effect of structural nonlinearities associated with in-plane forces in the panel was considered on the worst case linear flutter solution. The results of the study indicated that adequate flutter margins exist for the panel at the Mach numbers examined. The addition of structural damping improved flutter margins as did the inclusion of nonlinear effects associated with a static pressure difference across the panel.

Effect of Thermoelectric Cooling (TEC) module and the water flow heatsink on Photovoltaic (PV) panel performance

NASA Astrophysics Data System (ADS)

Amelia, A. R.; Jusoh, MA; Shamira Idris, Ida

2017-11-01

Photovoltaic (PV) panel suffers in low conversion efficiency of the output performance affected by the elevated operating temperature of the PV panel. It is important to keep the PV panel to operate at low temperature. To address this issue, this paper proposes the cooling system using thermoelectric cooling (TEC) and water block heatsink for enhancing the PV panel output performance. These both types cooling system were designed located on the back side of the PV panel to cool down the operating temperature of the PV panel. To evaluate the function for the existing cooling systems, the experiment was subsequently performed for PV panel without and with different design of the cooling system in outdoor weather conditions. By comparing the experimental results, it is concluded that by the hybrid cooling system which combining TEC module and the water block heatsink could improve the output performance of the PV panel. By the reduction temperature of the PV panel by 16.04 %, the average output power of the PV panel has been boosted up from 8.59 W to 9.03 W. In short, the output power of the PV panel was enhanced by the reduction of the operating temperature of the PV panel.

Image quality and radiation dose on digital chest imaging: comparison of amorphous silicon and amorphous selenium flat-panel systems.

PubMed

Bacher, Klaus; Smeets, Peter; Vereecken, Ludo; De Hauwere, An; Duyck, Philippe; De Man, Robert; Verstraete, Koenraad; Thierens, Hubert

2006-09-01

The aim of this study was to compare the image quality and radiation dose in chest imaging using an amorphous silicon flat-panel detector system and an amorphous selenium flat-panel detector system. In addition, the low-contrast performance of both systems with standard and low radiation doses was compared. In two groups of 100 patients each, digital chest radiographs were acquired with either an amorphous silicon or an amorphous selenium flat-panel system. The effective dose of the examination was measured using thermoluminescent dosimeters placed in an anthropomorphic Rando phantom. The image quality of the digital chest radiographs was assessed by five experienced radiologists using the European Guidelines on Quality Criteria for Diagnostic Radiographic Images. In addition, a contrast-detail phantom study was set up to assess the low-contrast performance of both systems at different radiation dose levels. Differences between the two groups were tested for significance using the two-tailed Mann-Whitney test. The amorphous silicon flat-panel system allowed an important and significant reduction in effective dose in comparison with the amorphous selenium flat-panel system (p < 0.0001) for both the posteroanterior and lateral views. In addition, clinical image quality analysis showed that the dose reduction was not detrimental to image quality. Compared with the amorphous selenium flat-panel detector system, the amorphous silicon flat-panel detector system performed significantly better in the low-contrast phantom study, with phantom entrance dose values of up to 135 muGy. Chest radiographs can be acquired with a significantly lower patient radiation dose using an amorphous silicon flat-panel system than using an amorphous selenium flat-panel system, thereby producing images that are equal or even superior in quality to those of the amorphous selenium flat-panel detector system.

Yield and cost of individual common diagnostic tests in new primary care outpatients in Japan.

PubMed

Takemura, Yuzuru; Ishida, Haku; Inoue, Yuji; Beck, J Robert

2002-01-01

Appropriate diagnostic testing involves considerations of cost-effectiveness. We examined the cost-effectiveness of individual tests in a panel of tests defined by the Japan Society of Clinical Pathology. We studied 540 new, symptomatic primary care outpatients with a set of 30 common diagnostic tests [the Essential Laboratory Tests (2); ELT(2) panel] for clinical evaluation and identification of occult disease. A useful result (UR) of testing was defined as a finding that contributed to a change in a physician's diagnosis or decision-making relating to a "tentative initial diagnosis" obtained from history and physical examination alone. The ELT(2) panel testing yielded 398 URs and uncovered 261 occult diseases among 540 patients. In total, 1592 tests contributed to either UR-generation or discovery of occult disease. The cost per effective test (cost required per test that contributed to either definition of effectiveness) ranged from 108 yen (approximately 0.92 US dollars) for total cholesterol to 6200 yen (approximately 52.50 dollars) for chest x-ray. Contribution rates and the cost per effective test varied among disease categories. We restructured panel components considering the effectiveness of each test. Subsets of the ELT(2) would have improved cost-effectiveness and achieved cost savings in five of eight disease categories. Assembly of tests based on cost-effectiveness can improve clinical efficiency and decrease total cost of panel testing for selected patient groups.

Determination of Oriented Strandboard properties from a three-dimensional density distribution using the finite element method

NASA Astrophysics Data System (ADS)

Tackie, Alan Derek Nii

Computer modeling of Oriented Strand Board (OSB) properties has gained widespread attention with numerous models created to better understand OBS behavior. Recent models allow researchers to observe multiple variables such as changes in moisture content, density and resin effects on panel performance. Thickness-swell variation influences panel durability and often has adverse effects on a structural panel's bending stiffness. The prediction of out-of-plane swell under changing moisture conditions was, therefore, the essence for developing a model in this research. The finite element model accounted for both vertical and horizontal density variations, the three-dimensional (3D) density variation of the board. The density variation, resulting from manufacturing processes, affects the uniformity of thickness-swell in OSB and is often exacerbated by continuous sorption of moisture that leads to potentially damaging internal stresses in the panel. The overall thickness-swell (the cumulative swell from non-uniform horizontal density profile, panel swell from free water, and spring-back from panel compression) was addressed through the finite element model in this research. The pursued goals in this study were, first and foremost, the development of a robust and comprehensive finite element model which integrated several component studies to investigate the effects of moisture variation on the out-of-plane thickness-swell of OSB panels, and second, the extension of the developed model to predict panel stiffness. It is hoped that this paper will encourage researchers to adopt the 3D density distribution approach as a viable approach to analyzing the physical and mechanical properties of OSB.

Effectiveness of the Solar Panels in the Castro Valley Unified School District Based on Projected Amount of Energy to be Produced

NASA Astrophysics Data System (ADS)

Sparks, J. R.; Palmer, T. C.; Siegel, A. P.

2014-12-01

In recent years Americans have warmed to the idea of installing solar panels to their homes and businesses. These panels help reduce the cost of receiving energy from power plants that lose a lot of energy in transportation. These power plants provide energy by burning gas or coal producing emissions that add to the growing problem of pollution and global warming. In 2010 the Castro Valley Unified School District decided to add solar panels to Canyon Middle School, Castro Valley High School, and Castro Valley Adult School. We researched whether the solar panels reached their projected amount of energy (74%) for the sites where the panels were placed. The solar panels at all three sites were found to exceed these projected amounts. The solar panels at each site produce a little over 74% for the each school.

Solar-Panel Dust Accumulation and Cleanings

NASA Technical Reports Server (NTRS)

2005-01-01

Air-fall dust accumulates on the solar panels of NASA's Mars Exploration Rovers, reducing the amount of sunlight reaching the solar arrays. Pre-launch models predicted steady dust accumulation. However, the rovers have been blessed with occasional wind events that clear significant amounts of dust from the solar panels.

This graph shows the effects of those panel-cleaning events on the amount of electricity generated by Spirit's solar panels. The horizontal scale is the number of Martian days (sols) after Spirit's Jan. 4, 2005, (Universal Time) landing on Mars. The vertical scale indicates output from the rover's solar panels as a fraction of the amount produced when the clean panels first opened. Note that the gradual declines are interrupted by occasional sharp increases, such as a dust-cleaning event on sol 420.

Impact of dietary supplemental methionine sources on sensory measurement of odor-related compounds in broiler excreta.

PubMed

Chavez, C; Coufal, C D; Niemeyer, P L; Carey, J B; Lacey, R E; Miller, R K; Beier, R C

2004-10-01

An experiment was conducted to detect differences in odor characteristics of broiler excreta due to utilization of different supplementary Met sources by a trained human descriptive aroma attribute sensory panel. The 5 treatment groups were no supplemental Met (control group), sodium methioninate aqueous solution, dry Met hydroxy analogue, liquid Met hydroxy analogue, and DL-Met. Two trials were conducted consisting of 5 treatment groups with 3 replications of 13 randomly distributed straight run broiler chicks per pen reared in battery cages. Starter and grower diets were formulated to contain 0.5 and 0.38% Met activity, respectively (except control group, 0.35% Met activity). Excreta were collected for 24 h in litter pans lined with aluminum foil at wk 4, 5, and 6 and analyzed by a trained sensory panel (7 people). Each panelist was given 25 g of manure heated at 27 degrees C for 5 min for sensory analysis. The 13 odor attributes used to determine differences in broiler excreta by the trained sensory panel were ammonia, dirty socks, wet poultry, fermented rotten fruit, hay, musty wet, sharp, sour, urinous, rotten eggs, irritating, pungent, and nauseating. Panelist marked intensities for each attribute ranging from 0 = none and 15 = extremely intense. Each panelist was given 2 replications of each treatment group in a random order each week (total of 10 samples per wk). All data were evaluated by ANOVA using the general linear model procedure of SAS software. No significant differences were observed in BW, feed consumption, or feed conversion among the treatments. The attributes of ammonia, wet poultry, rotten fruit, musty wet, sharp, and pungent differed (P < 0.05) across treatment groups. These findings demonstrate that supplemental Met sources significantly influence odor production in broiler excreta.

Development of an objective gene expression panel as an alternative to self-reported symptom scores in human influenza challenge trials.

PubMed

Muller, Julius; Parizotto, Eneida; Antrobus, Richard; Francis, James; Bunce, Campbell; Stranks, Amanda; Nichols, Marshall; McClain, Micah; Hill, Adrian V S; Ramasamy, Adaikalavan; Gilbert, Sarah C

2017-06-08

Influenza challenge trials are important for vaccine efficacy testing. Currently, disease severity is determined by self-reported scores to a list of symptoms which can be highly subjective. A more objective measure would allow for improved data analysis. Twenty-one volunteers participated in an influenza challenge trial. We calculated the daily sum of scores (DSS) for a list of 16 influenza symptoms. Whole blood collected at baseline and 24, 48, 72 and 96 h post challenge was profiled on Illumina HT12v4 microarrays. Changes in gene expression most strongly correlated with DSS were selected to train a Random Forest model and tested on two independent test sets consisting of 41 individuals profiled on a different microarray platform and 33 volunteers assayed by qRT-PCR. 1456 probes are significantly associated with DSS at 1% false discovery rate. We selected 19 genes with the largest fold change to train a random forest model. We observed good concordance between predicted and actual scores in the first test set (r = 0.57; RMSE = -16.1%) with the greatest agreement achieved on samples collected approximately 72 h post challenge. Therefore, we assayed samples collected at baseline and 72 h post challenge in the second test set by qRT-PCR and observed good concordance (r = 0.81; RMSE = -36.1%). We developed a 19-gene qRT-PCR panel to predict DSS, validated on two independent datasets. A transcriptomics based panel could provide a more objective measure of symptom scoring in future influenza challenge studies. Trial registration Samples were obtained from a clinical trial with the ClinicalTrials.gov Identifier: NCT02014870, first registered on December 5, 2013.

Use of Internet panels to conduct surveys.

PubMed

Hays, Ron D; Liu, Honghu; Kapteyn, Arie

2015-09-01

The use of Internet panels to collect survey data is increasing because it is cost-effective, enables access to large and diverse samples quickly, takes less time than traditional methods to obtain data for analysis, and the standardization of the data collection process makes studies easy to replicate. A variety of probability-based panels have been created, including Telepanel/CentERpanel, Knowledge Networks (now GFK KnowledgePanel), the American Life Panel, the Longitudinal Internet Studies for the Social Sciences panel, and the Understanding America Study panel. Despite the advantage of having a known denominator (sampling frame), the probability-based Internet panels often have low recruitment participation rates, and some have argued that there is little practical difference between opting out of a probability sample and opting into a nonprobability (convenience) Internet panel. This article provides an overview of both probability-based and convenience panels, discussing potential benefits and cautions for each method, and summarizing the approaches used to weight panel respondents in order to better represent the underlying population. Challenges of using Internet panel data are discussed, including false answers, careless responses, giving the same answer repeatedly, getting multiple surveys from the same respondent, and panelists being members of multiple panels. More is to be learned about Internet panels generally and about Web-based data collection, as well as how to evaluate data collected using mobile devices and social-media platforms.

A general panel sizing computer code and its application to composite structural panels

NASA Technical Reports Server (NTRS)

Anderson, M. S.; Stroud, W. J.

1978-01-01

A computer code for obtaining the dimensions of optimum (least mass) stiffened composite structural panels is described. The procedure, which is based on nonlinear mathematical programming and a rigorous buckling analysis, is applicable to general cross sections under general loading conditions causing buckling. A simplified method of accounting for bow-type imperfections is also included. Design studies in the form of structural efficiency charts for axial compression loading are made with the code for blade and hat stiffened panels. The effects on panel mass of imperfections, material strength limitations, and panel stiffness requirements are also examined. Comparisons with previously published experimental data show that accounting for imperfections improves correlation between theory and experiment.

General aviation aircraft interior noise problem: Some suggested solutions

NASA Technical Reports Server (NTRS)

Roskam, J.; Navaneethan, R.

1984-01-01

Laboratory investigation of sound transmission through panels and the use of modern data analysis techniques applied to actual aircraft is used to determine methods to reduce general aviation interior noise. The experimental noise reduction characteristics of stiffened flat and curved panels with damping treatment are discussed. The experimental results of double-wall panels used in the general aviation industry are given. The effects of skin panel material, fiberglass insulation and trim panel material on the noise reduction characteristics of double-wall panels are investigated. With few modifications, the classical sound transmission theory can be used to design the interior noise control treatment of aircraft. Acoustic intensity and analysis procedures are included.

Blackboard system generator (BSG) - An alternative distributed problem-solving paradigm

NASA Technical Reports Server (NTRS)

Silverman, Barry G.; Feggos, Kostas; Chang, Joseph Shih

1989-01-01

A status review is presented for a generic blackboard-based distributed problem-solving environment in which multiple-agent cooperation can be effected. This environment is organized into a shared information panel, a chairman control panel, and a metaplanning panel. Each panel contains a number of embedded AI techniques that facilitate its operation and that provide heuristics for solving the underlying team-agent decision problem. The status of these panels and heuristics is described along with a number of robustness considerations. The techniques for each of the three panels and for four sets of paradigm-related advances are described, along with selected results from classroom teaching experiments and from three applications.

Outbrief - Long Life Rocket Engine Panel

NASA Technical Reports Server (NTRS)

Quinn, Jason Eugene

2004-01-01

This white paper is an overview of the JANNAF Long Life Rocket Engine (LLRE) Panel results from the last several years of activity. The LLRE Panel has met over the last several years in order to develop an approach for the development of long life rocket engines. Membership for this panel was drawn from a diverse set of the groups currently working on rocket engines (Le. government labs, both large and small companies and university members). The LLRE Panel was formed in order to determine the best way to enable the design of rocket engine systems that have life capability greater than 500 cycles while meeting or exceeding current performance levels (Specific Impulse and Thrust/Weight) with a 1/1,OOO,OOO likelihood of vehicle loss due to rocket system failure. After several meetings and much independent work the panel reached a consensus opinion that the primary issues preventing LLRE are a lack of: physics based life prediction, combined loads prediction, understanding of material microphysics, cost effective system level testing. and the inclusion of fabrication process effects into physics based models. With the expected level of funding devoted to LLRE development, the panel recommended that fundamental research efforts focused on these five areas be emphasized.

Experimental Investigation at Mach Number 3.0 of the Effects of Thermal Stress and Buckling on the Flutter of Four-Bay Aluminum Alloy Panels with Length-Width Ratios of 10

NASA Technical Reports Server (NTRS)

Dixon, Sidney C.; Griffith, George E.; Bohon, Herman L.

1961-01-01

Skin-stiffener aluminum alloy panels consisting of four bays, each bay having a length-width ratio of 10, were tested at a Mach number of 3.0 at dynamic pressures ranging from 1,500 psf to 5,000 psf and at stagnation temperatures from 300 F to 655 F. The panels were restrained by the supporting structure in such a manner that partial thermal expansion of the skins could occur in both the longitudinal and lateral directions. A boundary faired through the experimental flutter points consisted of a flat-panel portion, a buckled-panel portion, and a transition point at the intersection of the two boundaries. In the region where a panel must be flat when flutter occurs, an increase in panel skin temperature (or midplane compressive stress) makes the panel more susceptible to flutter. In the region where a panel must be buckled when flutter occurs, the flutter trend is reversed. This reversal in trend is attributed to the panel postbuckling behavior.

Direct-reading design charts for 75S-T6 aluminum-alloy flat compression panels having longitudinal extruded Z-section stiffeners

NASA Technical Reports Server (NTRS)

Hickman, William A; Dow, Norris F

1951-01-01

Direct-reading design charts are presented for 75S-T6 aluminum-alloy flat compression panels having longitudinal extruded Z-section stiffeners. These charts, which cover a wide range of proportions, make possible the direct determination of the stress and all panel dimensions required to carry a given intensity of loading with a given skin thickness and effective length of panel.

Research on Storm-Tide Disaster Losses in China Using a New Grey Relational Analysis Model with the Dispersion of Panel Data

PubMed Central

Yin, Kedong; Zhang, Ya; Li, Xuemei

2017-01-01

Owing to the difference of the sequences’ orders and the surface structure in the current panel grey relational models, research results will not be unique. In addition, individual measurement of indicators and objects and the subjectivity of combined weight would significantly weaken the effective information of panel data and reduce the reliability and accuracy of research results. Therefore, we propose the concept and calculation method of dispersion of panel data, establish the grey relational model based on dispersion of panel data (DPGRA), and prove that DPGRA exhibits the effective properties of uniqueness, symmetry, and normality. To demonstrate its applicability, the proposed DPGRA model is used to research on storm-tide disaster losses in China’s coastal areas. Comparing research results of three models, which are DPGRA, Euclidean distance grey relational model, and grey grid relational model, it was shown that DPGRA is more effective, feasible, and stable. It is indicated that DPGRA can entirely utilize the effective information of panel data; what’s more, it can not only handle the non-uniqueness of the grey relational model’s results but also improve the reliability and accuracy of research results. The research results are of great significance for coastal areas to focus on monitoring storm–tide disasters hazards, strengthen the protection measures of natural disasters, and improve the ability of disaster prevention and reduction. PMID:29104262

Research on Storm-Tide Disaster Losses in China Using a New Grey Relational Analysis Model with the Dispersion of Panel Data.

PubMed

Yin, Kedong; Zhang, Ya; Li, Xuemei

2017-11-01

Owing to the difference of the sequences' orders and the surface structure in the current panel grey relational models, research results will not be unique. In addition, individual measurement of indicators and objects and the subjectivity of combined weight would significantly weaken the effective information of panel data and reduce the reliability and accuracy of research results. Therefore, we propose the concept and calculation method of dispersion of panel data, establish the grey relational model based on dispersion of panel data (DPGRA), and prove that DPGRA exhibits the effective properties of uniqueness, symmetry, and normality. To demonstrate its applicability, the proposed DPGRA model is used to research on storm-tide disaster losses in China's coastal areas. Comparing research results of three models, which are DPGRA, Euclidean distance grey relational model, and grey grid relational model, it was shown that DPGRA is more effective, feasible, and stable. It is indicated that DPGRA can entirely utilize the effective information of panel data; what's more, it can not only handle the non-uniqueness of the grey relational model's results but also improve the reliability and accuracy of research results. The research results are of great significance for coastal areas to focus on monitoring storm-tide disasters hazards, strengthen the protection measures of natural disasters, and improve the ability of disaster prevention and reduction.

Enhanced Co-Worker Social Support in Isolated Work Groups and Its Mitigating Role on the Work-Family Conflict-Depression Loss Spiral.

PubMed

McTernan, Wesley P; Dollard, Maureen F; Tuckey, Michelle R; Vandenberg, Robert J

2016-03-29

This paper examines a loss spiral model (i.e., reciprocal relationships) between work-family conflict and depression, moderated by co-worker support. We expected that the moderation effect due to co-worker support would be evident among those working in isolation (i.e., mining workers) due to a greater level of intragroup attraction and saliency attributable to the proximity effects. We used a two wave panel study and data from a random population sample of Australian employees (n = 2793, [n = 112 mining, n = 2681 non-mining]). Using structural equation modelling we tested the reciprocal three way interaction effects. In line with our theory, co-worker support buffered the reciprocal relationship between WFC and depression, showing a protective effect in both pathways. These moderation effects were found in the mining industry only suggesting a proximity component moderates the social support buffer hypothesis (i.e., a three way interaction effect). The present paper integrates previous theoretical perspectives of stress and support, and provides insight into the changing dynamics of workplace relationships.

Enhanced Co-Worker Social Support in Isolated Work Groups and Its Mitigating Role on the Work-Family Conflict-Depression Loss Spiral

PubMed Central

McTernan, Wesley P.; Dollard, Maureen F.; Tuckey, Michelle R.; Vandenberg, Robert J.

2016-01-01

This paper examines a loss spiral model (i.e., reciprocal relationships) between work-family conflict and depression, moderated by co-worker support. We expected that the moderation effect due to co-worker support would be evident among those working in isolation (i.e., mining workers) due to a greater level of intragroup attraction and saliency attributable to the proximity effects. We used a two wave panel study and data from a random population sample of Australian employees (n = 2793, [n = 112 mining, n = 2681 non-mining]). Using structural equation modelling we tested the reciprocal three way interaction effects. In line with our theory, co-worker support buffered the reciprocal relationship between WFC and depression, showing a protective effect in both pathways. These moderation effects were found in the mining industry only suggesting a proximity component moderates the social support buffer hypothesis (i.e., a three way interaction effect). The present paper integrates previous theoretical perspectives of stress and support, and provides insight into the changing dynamics of workplace relationships. PMID:27043592

A critique of the cross-lagged panel model.

PubMed

Hamaker, Ellen L; Kuiper, Rebecca M; Grasman, Raoul P P P

2015-03-01

The cross-lagged panel model (CLPM) is believed by many to overcome the problems associated with the use of cross-lagged correlations as a way to study causal influences in longitudinal panel data. The current article, however, shows that if stability of constructs is to some extent of a trait-like, time-invariant nature, the autoregressive relationships of the CLPM fail to adequately account for this. As a result, the lagged parameters that are obtained with the CLPM do not represent the actual within-person relationships over time, and this may lead to erroneous conclusions regarding the presence, predominance, and sign of causal influences. In this article we present an alternative model that separates the within-person process from stable between-person differences through the inclusion of random intercepts, and we discuss how this model is related to existing structural equation models that include cross-lagged relationships. We derive the analytical relationship between the cross-lagged parameters from the CLPM and the alternative model, and use simulations to demonstrate the spurious results that may arise when using the CLPM to analyze data that include stable, trait-like individual differences. We also present a modeling strategy to avoid this pitfall and illustrate this using an empirical data set. The implications for both existing and future cross-lagged panel research are discussed. (c) 2015 APA, all rights reserved).

Tracking the Correlation Between CpG Island Methylator Phenotype and Other Molecular Features and Clinicopathological Features in Human Colorectal Cancers: A Systematic Review and Meta-Analysis

PubMed Central

Zong, Liang; Abe, Masanobu; Ji, Jiafu; Zhu, Wei-Guo; Yu, Duonan

2016-01-01

Objectives: The controversy of CpG island methylator phenotype (CIMP) in colorectal cancers (CRCs) persists, despite many studies that have been conducted on its correlation with molecular and clinicopathological features. To drive a more precise estimate of the strength of this postulated relationship, a meta-analysis was performed. Methods: A comprehensive search for studies reporting molecular and clinicopathological features of CRCs stratified by CIMP was performed within the PubMed, EMBASE, and Cochrane Library. CIMP was defined by either one of the three panels of gene-specific CIMP markers (Weisenberger panel, classic panel, or a mixture panel of the previous two) or the genome-wide DNA methylation profile. The associations of CIMP with outcome parameters were estimated using odds ratio (OR) or weighted mean difference (WMD) or hazard ratios (HRs) with 95% confidence interval (CI) for each study using a fixed effects or random effects model. Results: A total of 29 studies involving 9,393 CRC patients were included for analysis. We observed more BRAF mutations (OR 34.87; 95% CI, 22.49–54.06) and microsatellite instability (MSI) (OR 12.85 95% CI, 8.84–18.68) in CIMP-positive vs. -negative CRCs, whereas KRAS mutations were less frequent (OR 0.47; 95% CI, 0.30–0.75). Subgroup analysis showed that only the genome-wide methylation profile-defined CIMP subset encompassed all BRAF-mutated CRCs. As expected, CIMP-positive CRCs displayed significant associations with female (OR 0.64; 95% CI, 0.56–0.72), older age at diagnosis (WMD 2.77; 95% CI, 1.15–4.38), proximal location (OR 6.91; 95% CI, 5.17–9.23), mucinous histology (OR 3.81; 95% CI, 2.93–4.95), and poor differentiation (OR 4.22; 95% CI, 2.52–7.08). Although CIMP did not show a correlation with tumor stage (OR 1.10; 95% CI, 0.82–1.46), it was associated with shorter overall survival (HR 1.73; 95% CI, 1.27–2.37). Conclusions: The meta-analysis highlights that CIMP-positive CRCs take their own molecular feature, especially overlapping with BRAF mutations, and clinicopathological features and worse prognosis from CIMP-negative CRCs, suggesting CIMP could be used as an independent prognostic marker for CRCs. PMID:26963001

Tracking the Correlation Between CpG Island Methylator Phenotype and Other Molecular Features and Clinicopathological Features in Human Colorectal Cancers: A Systematic Review and Meta-Analysis.

PubMed

Zong, Liang; Abe, Masanobu; Ji, Jiafu; Zhu, Wei-Guo; Yu, Duonan

2016-03-10

The controversy of CpG island methylator phenotype (CIMP) in colorectal cancers (CRCs) persists, despite many studies that have been conducted on its correlation with molecular and clinicopathological features. To drive a more precise estimate of the strength of this postulated relationship, a meta-analysis was performed. A comprehensive search for studies reporting molecular and clinicopathological features of CRCs stratified by CIMP was performed within the PubMed, EMBASE, and Cochrane Library. CIMP was defined by either one of the three panels of gene-specific CIMP markers (Weisenberger panel, classic panel, or a mixture panel of the previous two) or the genome-wide DNA methylation profile. The associations of CIMP with outcome parameters were estimated using odds ratio (OR) or weighted mean difference (WMD) or hazard ratios (HRs) with 95% confidence interval (CI) for each study using a fixed effects or random effects model. A total of 29 studies involving 9,393 CRC patients were included for analysis. We observed more BRAF mutations (OR 34.87; 95% CI, 22.49-54.06) and microsatellite instability (MSI) (OR 12.85 95% CI, 8.84-18.68) in CIMP-positive vs. -negative CRCs, whereas KRAS mutations were less frequent (OR 0.47; 95% CI, 0.30-0.75). Subgroup analysis showed that only the genome-wide methylation profile-defined CIMP subset encompassed all BRAF-mutated CRCs. As expected, CIMP-positive CRCs displayed significant associations with female (OR 0.64; 95% CI, 0.56-0.72), older age at diagnosis (WMD 2.77; 95% CI, 1.15-4.38), proximal location (OR 6.91; 95% CI, 5.17-9.23), mucinous histology (OR 3.81; 95% CI, 2.93-4.95), and poor differentiation (OR 4.22; 95% CI, 2.52-7.08). Although CIMP did not show a correlation with tumor stage (OR 1.10; 95% CI, 0.82-1.46), it was associated with shorter overall survival (HR 1.73; 95% CI, 1.27-2.37). The meta-analysis highlights that CIMP-positive CRCs take their own molecular feature, especially overlapping with BRAF mutations, and clinicopathological features and worse prognosis from CIMP-negative CRCs, suggesting CIMP could be used as an independent prognostic marker for CRCs.

Final Test Report: Hexavalent Chrome Free Coatings for Electronics Electromagnetic Interference (EMI) Shielding Effectiveness (SE)

NASA Technical Reports Server (NTRS)

Kessel, Kurt R.

2016-01-01

The test results for Salt Spray Resistance, Static Heat and Humidity and Marine Environment can be found in Sections 3.1.3.3, 3.1.4.3 and 3.1.5.3 respectively. In summary, both the Metalast TCP and SurTec 650 Type 2 conversion coatings perform very similar to the incumbent Type 1 conversion coating against both 6061 and 5052 aluminum under all three test conditions. Significant prior work was performed to select the aluminum and conversion coating included within this test cycle; Reference - NASA GSDO Program Hexavalent Chrome Alternatives Final Pretreatments Test Report Task Order: NNH12AA45D September 01, 2013. As illustrated in the data, the 6061 aluminum panels SLIGHTLY out-performed the 5052 aluminum panels. Individual shielding effectiveness graphs for each panel are included within Appendix C and D. One other notable effect found during review of the data is that the Test Panels exposed to B117 Salt Fog reduced in shielding effectiveness significantly more than the Marine Environment Test Panels. The shielding effectiveness of the Marine Test Panels was approximately 20dB higher than the Test Panels that underwent B117 Salt Fog Exposure. The intent of this evaluation was not to maximize shielding effectiveness values. The same Parker Chomerics Cho-Seal 6503 gasket material was used for all panels with aluminum and conversion coating variants. A typical EMI gasket design for corrosive environments would be done quite differently. The intent was to execute a test that would provide the best possible evaluation of different aluminum materials and conversion coatings in corrosive environments. The test program achieved this intent. The fact that the two aluminums and two Type II conversion coatings performed similar to the incumbent Type 1 conversion coating is a positive outcome. It was desired to have an outcome that further differentiation the performance of two aluminum types and two conversion coating types but this could not be extracted by the test results. Further analysis of the test plates may be done by X-Ray Photoelectron Spectroscopy (XPS) or Electrochemical Impedance Spectroscopy (EIS). Feasibility of this is under review.

Using long-term data to predict fish abundance: the case of Prochilodus lineatus (Characiformes, Prochilodontidae) in the intensely regulated upper Paraná River

USGS Publications Warehouse

Piana, Pitágoras A.; Cardoso, Bárbara F.; Dias, Joilson; Gomes, Luiz C.; Agostinho, Angelo A.; Miranda, Leandro E.

2017-01-01

Populations show spatial-temporal fluctuations in abundance, partly due to random processes and partly due to self-regulatory processes. We evaluated the effects of various external factors on the population numerical abundance of curimba Prochilodus lineatus in the upper Paraná River floodplain, Brazil, over a 19-year period. Panel data analysis was applied to examine the structure of temporal and spatial abundance while controlling auto-regressive processes and spatial non-homogeneity variances that often obscure relationships. As sources of population variation, we considered predation, competition, selected abiotic variables, construction of a dam upstream of the study area, water level and flood intensity during the spawning period. We found that biological interactions (predation and competition) were not significantly related to variations in curimba abundance; specific conductance was a space indicator of abundance, apparently linked to the biology of the species; intensity of floods determined inter-annual variation in abundances; Porto Primavera Dam negatively impacted the abundances at sites in the floodplain directly affected by discharges from the dam. Panel data analysis was a powerful tool that identified the need for intense flooding to maintain high abundances of curimba in the upper Paraná River. We believe our results apply to other species with similar life strategy.

World Health Organization Guidelines: Use of cryotherapy for cervical intraepithelial neoplasia.

PubMed

Santesso, Nancy; Schünemann, Holger; Blumenthal, Paul; De Vuyst, Hugo; Gage, Julia; Garcia, Francisco; Jeronimo, Jose; Lu, Ricky; Luciani, Silvana; Quek, Swee C; Awad, Tahany; Broutet, Nathalie

2012-08-01

In 2008, cervical cancer was responsible for 275000 deaths, of which approximately 88% occurred in low- and middle-income countries. In 2009, the World Health Organization (WHO) committed to updating recommendations for use of cryotherapy for cervical intraepithelial neoplasia (CIN). We followed the WHO Handbook for Guidelines Development to develop present guidelines. An expert panel was established, which included clinicians, researchers, program directors, and methodologists. An independent group conducted systematic reviews and produced evidence summaries following the GRADE approach. GRADE evidence profiles were created for 16 key questions about the effects of cryotherapy in the presence of histologically confirmed CIN compared with no treatment and with loop electrosurgical excision procedure, as well as the use of different cryotherapy techniques. We identified a small number of randomized controlled trials or independently controlled observational studies. Surrogate outcomes were reported when evidence about outcomes critical to decision making were not available. The panel made 14 recommendations and documented factors that determined the strength and direction of the recommendations in decision tables. The present document summarizes new evidence-based WHO recommendations about the use of cryotherapy in women with histologically confirmed CIN for low-, middle-, and high-income countries. Copyright © 2012 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

Corrosion protection of aluminum alloys in contact with other metals

NASA Technical Reports Server (NTRS)

Kuster, C. A.

1969-01-01

Study establishes the quality of chemical and galvanized protection afforded by anodized and aldozided coatings applied to test panels of various aluminum alloys. The test panels, placed in firm contact with panels of titanium alloys, were subjected to salt spray tests and visually examined for corrosion effect.

21 CFR 601.26 - Reclassification procedures to determine that licensed biological products are safe, effective...

Code of Federal Regulations, 2011 CFR

2011-04-01

... to the Commissioner a report containing the panel's conclusions and recommendations with respect to... statement of why such alternatives are not suitable. In making this recommendation the panel shall also take... order. After reviewing the conclusions and recommendations of the advisory review panels, the...

Noise transmission by viscoelastic sandwich panels

NASA Technical Reports Server (NTRS)

Vaicaitis, R.

1977-01-01

An analytical study on low frequency noise transmission into rectangular enclosures by viscoelastic sandwich panels is presented. Soft compressible cores with dilatational modes and hard incompressible cores with dilatational modes neglected are considered as limiting cases of core stiffness. It is reported that these panels can effect significant noise reduction.

The development of optimal lightweight truss-core sandwich panels

NASA Astrophysics Data System (ADS)

Langhorst, Benjamin Robert

Sandwich structures effectively provide lightweight stiffness and strength by sandwiching a low-density core between stiff face sheets. The performance of lightweight truss-core sandwich panels is enhanced through the design of novel truss arrangements and the development of methods by which the panels may be optimized. An introduction to sandwich panels is presented along with an overview of previous research of truss-core sandwich panels. Three alternative truss arrangements are developed and their corresponding advantages, disadvantages, and optimization routines are discussed. Finally, performance is investigated by theoretical and numerical methods, and it is shown that the relative structural efficiency of alternative truss cores varies with panel weight and load-carrying capacity. Discrete truss core sandwich panels can be designed to serve bending applications more efficiently than traditional pyramidal truss arrangements at low panel weights and load capacities. Additionally, discrete-truss cores permit the design of heterogeneous cores, which feature unit cells that vary in geometry throughout the panel according to the internal loads present at each unit cell's location. A discrete-truss core panel may be selectively strengthened to more efficiently support bending loads. Future research is proposed and additional areas for lightweight sandwich panel development are explained.

Communicating about Mental Illness and Violence: Balancing Increased Support for Services and Stigma

PubMed Central

Goldman, Howard H.; Pescosolido, Bernice A.; Barry, Colleen L.

2017-01-01

In the ongoing national policy debate about how to best address serious mental illness (SMI), a major controversy among mental health advocates is whether drawing public attention to an apparent link between SMI and violence, shown to elevate stigma, is the optimal strategy for increasing public support for investing in mental health services or whether non-stigmatizing messages can be equally effective. We conducted a randomized experiment to examine this question. Participants in a nationally representative online panel (N=1,326) were randomized to read one of three brief narratives about SMI emphasizing violence, systemic barriers to treatment, or successful treatment and recovery or to a control arm. Narratives, or stories about individuals, are a common communication strategy used by policymakers, advocates, and the news media. Study results showed that narratives emphasizing violence and barriers to treatment were equally effective in increasing the public’s willingness to pay additional taxes to improve the mental health system (55% and 52% versus 42% in the control arm). Only the narrative emphasizing the link between SMI and violence increased stigma. For the mental health advocates dedicated to improving the public mental health system, findings offer an alternative to stigmatizing messages linking mental illness and violence. PMID:29630706

Three estimates of the association between linear growth failure and cognitive ability.

PubMed

Cheung, Y B; Lam, K F

2009-09-01

To compare three estimators of association between growth stunting as measured by height-for-age Z-score and cognitive ability in children, and to examine the extent statistical adjustment for covariates is useful for removing confounding due to socio-economic status. Three estimators, namely random-effects, within- and between-cluster estimators, for panel data were used to estimate the association in a survey of 1105 pairs of siblings who were assessed for anthropometry and cognition. Furthermore, a 'combined' model was formulated to simultaneously provide the within- and between-cluster estimates. Random-effects and between-cluster estimators showed strong association between linear growth and cognitive ability, even after adjustment for a range of socio-economic variables. In contrast, the within-cluster estimator showed a much more modest association: For every increase of one Z-score in linear growth, cognitive ability increased by about 0.08 standard deviation (P < 0.001). The combined model verified that the between-cluster estimate was significantly larger than the within-cluster estimate (P = 0.004). Residual confounding by socio-economic situations may explain a substantial proportion of the observed association between linear growth and cognition in studies that attempt to control the confounding by means of multivariable regression analysis. The within-cluster estimator provides more convincing and modest results about the strength of association.

Communicating about Mental Illness and Violence: Balancing Stigma and Increased Support for Services.

PubMed

McGinty, Emma E; Goldman, Howard H; Pescosolido, Bernice A; Barry, Colleen L

2018-04-01

In the ongoing national policy debate about how to best address serious mental illness (SMI), a major controversy among mental health advocates is whether drawing public attention to an apparent link between SMI and violence, shown to elevate stigma, is the optimal strategy for increasing public support for investing in mental health services or whether nonstigmatizing messages can be equally effective. We conducted a randomized experiment to examine this question. Participants in a nationally representative online panel (N = 1,326) were randomized to a control arm or to read one of three brief narratives about SMI emphasizing violence, systemic barriers to treatment, or successful treatment and recovery. Narratives, or stories about individuals, are a common communication strategy used by policy makers, advocates, and the news media. Study results showed that narratives emphasizing violence or barriers to treatment were equally effective in increasing the public's willingness to pay additional taxes to improve the mental health system (55 percent and 52 percent, vs. 42 percent in the control arm). Only the narrative emphasizing the link between SMI and violence increased stigma. For mental health advocates dedicated to improving the public mental health system, these findings offer an alternative to stigmatizing messages linking mental illness and violence. Copyright © 2018 by Duke University Press.

The role of psychological flexibility in a self-help acceptance and commitment therapy intervention for psychological distress in a randomized controlled trial.

PubMed

Fledderus, Martine; Bohlmeijer, Ernst T; Fox, Jean-Paul; Schreurs, Karlein M G; Spinhoven, Philip

2013-03-01

This study examined the role of psychological flexibility, as a risk factor and as a process of change, in a self-help Acceptance and Commitment Therapy (ACT) intervention for adults with mild to moderate depression and anxiety. Participants were randomized to the self-help programme with e-mail support (n=250), or to a waiting list control group (n=126). All participants completed measures before and after the intervention to assess depression, anxiety and psychological flexibility. Participants in the experimental condition also completed these measures during the intervention (after three and six weeks) and at a three-month follow-up. With multilevel modelling, it was shown that the effects of the intervention on psychological distress were stronger for participants with higher levels of psychological flexibility. Furthermore, our study showed that improved psychological flexibility mediated the effects of the ACT intervention. With a cross-lagged panel design, it was shown that especially improvements in psychological flexibility in the last three sessions of the intervention were important for further reductions in anxiety. To conclude, our study showed the importance of targeting psychological flexibility during an ACT intervention for a reduction in depressive and anxiety symptoms. Copyright © 2012 Elsevier Ltd. All rights reserved.

Effectiveness of self-management promotion educational program among diabetic patients based on health belief model

PubMed Central

Jalilian, Farzad; Motlagh, Fazel Zinat; Solhi, Mahnaz; Gharibnavaz, Hasan

2014-01-01

Introduction: Diabetes is a chronic disease; it can cause serious complications. Diabetes self-management is essential for prevention of disease complications. This study was conducted to evaluate self-management promotion educational program intervention efficiency among diabetic patients in Iran and health belief model (HBM) was applied as a theoretical framework. Materials and Methods: Overall, 120 Type 2 diabetic patients referred to rural health centers in Gachsaran, Iran participated in this study as randomly divided into intervention and control group. This was a longitudinal randomized pre- and post-test series control group design panel study to implement a behavior modification based intervention to promotion self-management among diabetic patients. Cross-tabulation and t-test by using SPSS statistical package, version 16 was used for the statistical analysis. Results: Mean age was 55.07 years (SD = 9.94, range: 30-70). Our result shows significant improvements in average response for susceptibility, severity, benefit and self-management among intervention group. Additionally, after intervention, average response of the barrier to self-management was decreased among intervention group. Conclusion: Our result showed education program based on HBM was improve of self-management and seems implementing these programs can be effective in the and prevention of diabetes complications. PMID:24741654

Environmental effects of ozone depletion and its interactions with climate change: progress report, 2015

EPA Science Inventory

The Environmental Effects Assessment Panel (EEAP) is one of three Panels that regularly informs the Parties (countries) to the Montreal Protocol on the effects of ozone depletion and the consequences of climate change interactions with respect to human health, animals, plants, bi...

DOE Office of Scientific and Technical Information (OSTI.GOV)

James Schondel; Henry S. Chu

Lightweight panels have been designed to protect buildings and vehicles from blast pressures by activating energy dissipation mechanisms under the influence of blast loading. Panels were fabricated which featured a variety of granular materials and hydraulic dissipative deformation mechanisms and the test articles were subjected to full-scale blast loading. The force time-histories transmitted by each technology were measured by a novel method that utilized inexpensive custom-designed force sensors. The array of tests revealed that granular materials can effectively dissipate blast energy if they are employed in a way that they easily crush and rearrange. Similarly, hydraulic dissipation can effectively dissipatemore » energy if the panel features a high fraction of porosity and the panel encasement features low compressive stiffness.« less

Experimental modal analysis of the fuselage panels of an Aero Commander aircraft

NASA Technical Reports Server (NTRS)

Geisler, D.

1981-01-01

The reduction of interior noise in light aircraft was investigated with emphasis the thin fuselage sidewall. The approach used is theoretical and involves modeling of the sidewall panels and stiffeners. Experimental data obtained from tests investigating the effects of mass and stiffness treatments to the sidewalls are presented. The dynamic characteristics of treated panels are contrasted with the untreated sidewall panels using experimental modal analysis techniques. The results include the natural frequencies, modal dampling, and mode shapes of selected panels. Frequency response functions, data relating to the global fuselage response, and acoustic response are also presented.

Does grandchild care influence grandparents' self-rated health? Evidence from a fixed effects approach.

PubMed

Ates, Merih

2017-10-01

The present study aims to identify, whether and how supplementary grandchild care is causally related to grandparents' self-rated health (SRH). Based on longitudinal data drawn from the German Aging Survey (DEAS; 2008-2014), I compare the results of pooled OLS, pooled OLS with lagged dependant variables (POLS-LD), random and fixed effects (RE, FE) panel regression. The results show that there is a positive but small association between supplementary grandchild care and SRH in POLS, POLS-LD, and RE models. However, the fixed effects model shows that the intrapersonal change in grandchild care does not cause a change in grandparents' SRH. The FE findings indicate that supplementary grandchild care in Germany does not have a causal impact on grandparents' SRH, suggesting that models with between-variation components overestimate the influence of grandchild care on grandparents' health because they do not control for unobserved (time-constant) heterogeneity. Copyright © 2017 Elsevier Ltd. All rights reserved.

Does wastewater discharge have relations with increase of Turner syndrome and Down syndrome?

PubMed

Choi, Intae

2017-01-01

The purpose of this study is to examine whether water and air pollutants have a relationship with an increase in the genetic disorders Turner syndrome and Down syndrome, which are caused by congenital chromosomal abnormalities, and to generate a hypothesis about the genetic health effects of environmental pollutants. A panel regression based on random effect was conducted on Korea's metropolitan councils from 2012 to 2014. The dependent variable was the number of Turner syndrome and Down syndrome cases, and the main independent variables were those regarding the water and air pollution. Air pollutants did not have a significant impact on the number of Turner syndrome and Down syndrome cases; however, the increase in number of wastewater discharge companies did have a significant relationship with the number of cases. The more the number of wastewater discharge companies, the more the number Turner syndrome and Down syndrome cases were observed. Therefore, scientific investigation on water and air pollutants in relation with genetic health effects needs to be performed.

Panels of HIV-1 Subtype C Env Reference Strains for Standardized Neutralization Assessments

DOE PAGES

Hraber, Peter; Rademeyer, Cecilia; Williamson, Carolyn; ...

2017-07-26

In the search for effective immunologic interventions to prevent and treat HIV-1 infection, standardized reference reagents are a cost-effective way to maintain robustness and reproducibility among immunological assays. To support planned and ongoing studies where clade C predominates, here we describe three virus panels, chosen from 200 well-characterized clade C envelope (Env)-pseudotyped viruses from early infection. All 200 Envs were expressed as a single round of replication pseudoviruses and were tested to quantify neutralization titers by 16 broadly neutralizing antibodies (bnAbs) and sera from 30 subjects with chronic clade C infections. We selected large panels of 50 and 100 Envsmore » either to characterize cross-reactive breadth for sera identified as having potent neutralization activity based on initial screening or to evaluate neutralization magnitude-breadth distributions of newly isolated antibodies. We identified these panels by downselection after hierarchical clustering of bnAb neutralization titers. The resulting panels represent the diversity of neutralization profiles throughout the range of virus sensitivities identified in the original panel of 200 viruses. A small 12-Env panel was chosen to screen sera from vaccine trials or natural-infection studies for neutralization responses. We considered panels selected by previously described methods but favored a computationally informed method that enabled selection of viruses representing diverse neutralization sensitivity patterns, given that we do nota prioriknow what the neutralization-response profile of vaccine sera will be relative to that of sera from infected individuals. The resulting 12-Env panel complements existing panels. Use of standardized panels enables direct comparisons of data from different trials and study sites testing HIV-1 clade C-specific products. HIV-1 group M includes nine clades and many recombinants. Clade C is the most common lineage, responsible for roughly half of current HIV-1 infections, and is a focus for vaccine design and testing. Standard reference reagents, particularly virus panels to study neutralization by antibodies, are crucial for developing cost-effective and yet rigorous and reproducible assays against diverse examples of this variable virus. We developed clade C-specific panels for use as standardized reagents to monitor complex polyclonal sera for neutralization activity and to characterize the potency and breadth of cross-reactive neutralization by monoclonal antibodies, whether engineered or isolated from infected individuals. We chose from 200 southern African, clade C envelope-pseudotyped viruses with neutralization titers against 16 broadly neutralizing antibodies and 30 sera from chronic clade C infections. We selected panels to represent the diversity of bnAb neutralization profiles and Env neutralization sensitivities. Finally, use of standard virus panels can facilitate comparison of results across studies and sites.« less

Panels of HIV-1 Subtype C Env Reference Strains for Standardized Neutralization Assessments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hraber, Peter; Rademeyer, Cecilia; Williamson, Carolyn

In the search for effective immunologic interventions to prevent and treat HIV-1 infection, standardized reference reagents are a cost-effective way to maintain robustness and reproducibility among immunological assays. To support planned and ongoing studies where clade C predominates, here we describe three virus panels, chosen from 200 well-characterized clade C envelope (Env)-pseudotyped viruses from early infection. All 200 Envs were expressed as a single round of replication pseudoviruses and were tested to quantify neutralization titers by 16 broadly neutralizing antibodies (bnAbs) and sera from 30 subjects with chronic clade C infections. We selected large panels of 50 and 100 Envsmore » either to characterize cross-reactive breadth for sera identified as having potent neutralization activity based on initial screening or to evaluate neutralization magnitude-breadth distributions of newly isolated antibodies. We identified these panels by downselection after hierarchical clustering of bnAb neutralization titers. The resulting panels represent the diversity of neutralization profiles throughout the range of virus sensitivities identified in the original panel of 200 viruses. A small 12-Env panel was chosen to screen sera from vaccine trials or natural-infection studies for neutralization responses. We considered panels selected by previously described methods but favored a computationally informed method that enabled selection of viruses representing diverse neutralization sensitivity patterns, given that we do nota prioriknow what the neutralization-response profile of vaccine sera will be relative to that of sera from infected individuals. The resulting 12-Env panel complements existing panels. Use of standardized panels enables direct comparisons of data from different trials and study sites testing HIV-1 clade C-specific products. HIV-1 group M includes nine clades and many recombinants. Clade C is the most common lineage, responsible for roughly half of current HIV-1 infections, and is a focus for vaccine design and testing. Standard reference reagents, particularly virus panels to study neutralization by antibodies, are crucial for developing cost-effective and yet rigorous and reproducible assays against diverse examples of this variable virus. We developed clade C-specific panels for use as standardized reagents to monitor complex polyclonal sera for neutralization activity and to characterize the potency and breadth of cross-reactive neutralization by monoclonal antibodies, whether engineered or isolated from infected individuals. We chose from 200 southern African, clade C envelope-pseudotyped viruses with neutralization titers against 16 broadly neutralizing antibodies and 30 sera from chronic clade C infections. We selected panels to represent the diversity of bnAb neutralization profiles and Env neutralization sensitivities. Finally, use of standard virus panels can facilitate comparison of results across studies and sites.« less

Measuring Practicing Clinicians' Information Literacy. An Exploratory Analysis in the Context of Panel Management.

PubMed

Dixon, Brian E; Barboza, Katherine; Jensen, Ashley E; Bennett, Katelyn J; Sherman, Scott E; Schwartz, Mark D

2017-02-15

As healthcare moves towards technology-driven population health management, clinicians must adopt complex digital platforms to access health information and document care. This study explored information literacy, a set of skills required to effectively navigate population health information systems, among primary care providers in one Veterans' Affairs (VA) medical center. Information literacy was assessed during an 8-month randomized trial that tested a population health (panel) management intervention. Providers were asked about their use and comfort with two VA digital tools for panel management at baseline, 16 weeks, and post-intervention. An 8-item scale (range 0-40) was used to measure information literacy (Cronbach's α=0.84). Scores between study arms and provider types were compared using paired t-tests and ANOVAs. Associations between self-reported digital tool use and information literacy were measured via Pearson's correlations. Providers showed moderate levels of information literacy (M= 27.4, SD 6.5). There were no significant differences in mean information literacy between physicians (M=26.4, SD 6.7) and nurses (M=30.5, SD 5.2, p=0.57 for difference), or between intervention (M=28.4, SD 6.5) and control groups (M=25.1, SD 6.2, p=0.12 for difference). Information literacy was correlated with higher rates of self-reported information system usage (r=0.547, p=0.001). Clinicians identified data access, accuracy, and interpretability as potential information literacy barriers. While exploratory in nature, cautioning generalizability, the study suggests that measuring and improving clinicians' information literacy may play a significant role in the implementation and use of digital information tools, as these tools are rapidly being deployed to enhance communication among care teams, improve health care outcomes, and reduce overall costs.

Canadian Thoracic Society recommendations for management of chronic obstructive pulmonary disease - 2007 update.

PubMed

O'Donnell, Denis E; Aaron, Shaw; Bourbeau, Jean; Hernandez, Paul; Marciniuk, Darcy D; Balter, Meyer; Ford, Gordon; Gervais, Andre; Goldstein, Rogers; Hodder, Rick; Kaplan, Alan; Keenan, Sean; Lacasse, Yves; Maltais, Francois; Road, Jeremy; Rocker, Graeme; Sin, Don; Sinuff, Tasmin; Voduc, Nha

2007-09-01

Chronic obstructive pulmonary disease (COPD) is a major respiratory illness in Canada that is both preventable and treatable. Our understanding of the pathophysiology of this complex condition continues to grow and our ability to offer effective treatment to those who suffer from it has improved considerably. The purpose of the present educational initiative of the Canadian Thoracic Society (CTS) is to provide up to date information on new developments in the field so that patients with this condition will receive optimal care that is firmly based on scientific evidence. Since the previous CTS management recommendations were published in 2003, a wealth of new scientific information has become available. The implications of this new knowledge with respect to optimal clinical care have been carefully considered by the CTS Panel and the conclusions are presented in the current document. Highlights of this update include new epidemiological information on mortality and prevalence of COPD, which charts its emergence as a major health problem for women; a new section on common comorbidities in COPD; an increased emphasis on the meaningful benefits of combined pharmacological and nonpharmacological therapies; and a new discussion on the prevention of acute exacerbations. A revised stratification system for severity of airway obstruction is proposed, together with other suggestions on how best to clinically evaluate individual patients with this complex disease. The results of the largest randomized clinical trial ever undertaken in COPD have recently been published, enabling the Panel to make evidence-based recommendations on the role of modern pharmacotherapy. The Panel hopes that these new practice guidelines, which reflect a rigorous analysis of the recent literature, will assist caregivers in the diagnosis and management of this common condition.

Motivational and contextual determinants of HPV-vaccination uptake: A longitudinal study among mothers of girls invited for the HPV-vaccination.

PubMed

Pot, Mirjam; van Keulen, Hilde M; Ruiter, Robert A C; Eekhout, Iris; Mollema, Liesbeth; Paulussen, Theo W G M

2017-07-01

In the Netherlands, HPV-vaccination uptake among 12-year-old girls remains to be lower (61% in 2016) than expected. The present study is about 1) replicating the extent to which social-psychological determinants found in earlier cross-sectional studies explain HPV-vaccination intention, and 2) testing whether HPV-vaccination intention, as well as other social-psychological determinants, are good predictors of future HPV-vaccination uptake in a longitudinal design. A random sample of mothers of girls invited for the vaccination in 2015 was drawn from the Dutch vaccination register (Praeventis) (N=36,000) and from three online panels (N=2483). Two months prior to the vaccination of girls, their mothers were requested to complete a web-based questionnaire by letter (Praeventis sample) or by e-mail (panel samples). HPV-vaccination uptake was derived from Praeventis. Backward linear and logistic regression analyses were conducted to examine most dominant predictors of HPV-vaccination intention and uptake, respectively. The total sample used for data analyses consisted of 8062 mothers. Response rates were 18% for the Praeventis sample and 47% for the panel samples. HPV-vaccination intention was best explained by attitude, beliefs, subjective norms, habit, and perceived relative effectiveness of the vaccination; they explained 83% of the variance in HPV-vaccination intention. Intention appeared to be the only stable predictor of HPV-vaccination uptake and explained 43% of the variance in HPV-vaccination uptake. These results confirm what was found by earlier cross-sectional studies, and provide strong leads for selecting relevant targets in the planning of future communication strategies aiming to improve HPV-vaccination uptake. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Guidelines for Improving Entry Into and Retention in Care and Antiretroviral Adherence for Persons With HIV: Evidence-Based Recommendations From an International Association of Physicians in AIDS Care Panel

PubMed Central

Thompson, Melanie A.; Mugavero, Michael J.; Amico, K. Rivet; Cargill, Victoria A.; Chang, Larry W.; Gross, Robert; Orrell, Catherine; Altice, Frederick L.; Bangsberg, David R.; Bartlett, John G.; Beckwith, Curt G.; Dowshen, Nadia; Gordon, Christopher M.; Horn, Tim; Kumar, Princy; Scott, James D.; Stirratt, Michael J.; Remien, Robert H.; Simoni, Jane M.; Nachega, Jean B.

2014-01-01

Description After HIV diagnosis, timely entry into HIV medical care and retention in that care are essential to the provision of effective antiretroviral therapy (ART). ART adherence is among the key determinants of successful HIV treatment outcome and is essential to minimize the emergence of drug resistance. The International Association of Physicians in AIDS Care convened a panel to develop evidence-based recommendations to optimize entry into and retention in care and ART adherence for people with HIV. Methods A systematic literature search was conducted to produce an evidence base restricted to randomized, controlled trials and observational studies with comparators that had at least 1 measured biological or behavioral end point. A total of 325 studies met the criteria. Two reviewers independently extracted and coded data from each study using a standardized data extraction form. Panel members drafted recommendations based on the body of evidence for each method or intervention and then graded the overall quality of the body of evidence and the strength for each recommendation. Recommendations Recommendations are provided for monitoring of entry into and retention in care, interventions to improve entry and retention, and monitoring of and interventions to improve ART adherence. Recommendations cover ART strategies, adherence tools, education and counseling, and health system and service delivery interventions. In addition, they cover specific issues pertaining to pregnant women, incarcerated individuals, homeless and marginally housed individuals, and children and adolescents, as well as substance use and mental health disorders. Recommendations for future research in all areas are also provided. PMID:22393036

Canadian Thoracic Society recommendations for management of chronic obstructive pulmonary disease – 2007 update

PubMed Central

O’Donnell, Denis E; Aaron, Shawn; Bourbeau, Jean; Hernandez, Paul; Marciniuk, Darcy D; Balter, Meyer; Ford, Gordon; Gervais, Andre; Goldstein, Roger; Hodder, Rick; Kaplan, Alan; Keenan, Sean; Lacasse, Yves; Maltais, Francois; Road, Jeremy; Rocker, Graeme; Sin, Don; Sinuff, Tasmin; Voduc, Nha

2007-01-01

Chronic obstructive pulmonary disease (COPD) is a major respiratory illness in Canada that is both preventable and treatable. Our understanding of the pathophysiology of this complex condition continues to grow and our ability to offer effective treatment to those who suffer from it has improved considerably. The purpose of the present educational initiative of the Canadian Thoracic Society (CTS) is to provide up to date information on new developments in the field so that patients with this condition will receive optimal care that is firmly based on scientific evidence. Since the previous CTS management recommendations were published in 2003, a wealth of new scientific information has become available. The implications of this new knowledge with respect to optimal clinical care have been carefully considered by the CTS Panel and the conclusions are presented in the current document. Highlights of this update include new epidemiological information on mortality and prevalence of COPD, which charts its emergence as a major health problem for women; a new section on common comorbidities in COPD; an increased emphasis on the meaningful benefits of combined pharmacological and nonpharmacological therapies; and a new discussion on the prevention of acute exacerbations. A revised stratification system for severity of airway obstruction is proposed, together with other suggestions on how best to clinically evaluate individual patients with this complex disease. The results of the largest randomized clinical trial ever undertaken in COPD have recently been published, enabling the Panel to make evidence-based recommendations on the role of modern pharmacotherapy. The Panel hopes that these new practice guidelines, which reflect a rigorous analysis of the recent literature, will assist caregivers in the diagnosis and management of this common condition. PMID:17885691

Energy-water-food nexus under financial constraint environment: good, the bad, and the ugly sustainability reforms in sub-Saharan African countries.

PubMed

Zaman, Khalid; Shamsuddin, Sadaf; Ahmad, Mehboob

2017-05-01

Environmental sustainability agenda are generally compromised by energy, water, and food production resources, while in the recent waves of global financial crisis, it mediates to increase the intensity of air pollutants, which largely affected the less developing countries due to their ease of environmental regulation policies and lack of optimal utilization of economic resources. Sub-Saharan African (SSA) countries are no exception that majorly hit by the recent global financial crisis, which affected the country's natural environment through the channel of unsustainable energy-water-food production. The study employed panel random effect model that addresses the country-specific time-invariant shocks to examine the non-linear relationship between water-energy-food resources and air pollutants in a panel of 19 selected SSA countries, for a period of 2000-2014. The results confirmed the carbon-fossil-methane environmental Kuznets curve (EKC) that turned into inverted U-shaped relationships in a panel of selected SSA countries. Food resources largely affected greenhouse gas (GHG), methane (CH 4 ), and nitrous oxide (N 2 O) emissions while water resource decreases carbon dioxide (CO 2 ), fossil fuel, and CH 4 emissions in a region. Energy efficiency improves air quality indicators while industry value added increases CO 2 emissions, fossil fuel energy, and GHG emissions. Global financial crisis increases the risk of climate change across countries. The study concludes that although SSA countries strive hard to take some "good" initiatives to reduce environmental degradation in a form of improved water and energy sources, however, due to lack of optimal utilization of food resources and global financial constraints, it leads to "the bad" and "the ugly" sustainability reforms in a region.

Validation of Vehicle Panel/Equipment Response from Diffuse Acoustic Field Excitation Using Spatially Correlated Transfer Function Approach

NASA Technical Reports Server (NTRS)

Smith, Andrew; LaVerde, Bruce; Fulcher, Clay; Hunt, Ron

2012-01-01

An approach for predicting the vibration, strain, and force responses of a flight-like vehicle panel assembly to acoustic pressures is presented. Important validation for the approach is provided by comparison to ground test measurements in a reverberant chamber. The test article and the corresponding analytical model were assembled in several configurations to demonstrate the suitability of the approach for response predictions when the vehicle panel is integrated with equipment. Critical choices in the analysis necessary for convergence of the predicted and measured responses are illustrated through sensitivity studies. The methodology includes representation of spatial correlation of the pressure field over the panel surface. Therefore, it is possible to demonstrate the effects of hydrodynamic coincidence in the response. The sensitivity to pressure patch density clearly illustrates the onset of coincidence effects on the panel response predictions.

Multi-objective optimal design of sandwich panels using a genetic algorithm

NASA Astrophysics Data System (ADS)

Xu, Xiaomei; Jiang, Yiping; Pueh Lee, Heow

2017-10-01

In this study, an optimization problem concerning sandwich panels is investigated by simultaneously considering the two objectives of minimizing the panel mass and maximizing the sound insulation performance. First of all, the acoustic model of sandwich panels is discussed, which provides a foundation to model the acoustic objective function. Then the optimization problem is formulated as a bi-objective programming model, and a solution algorithm based on the non-dominated sorting genetic algorithm II (NSGA-II) is provided to solve the proposed model. Finally, taking an example of a sandwich panel that is expected to be used as an automotive roof panel, numerical experiments are carried out to verify the effectiveness of the proposed model and solution algorithm. Numerical results demonstrate in detail how the core material, geometric constraints and mechanical constraints impact the optimal designs of sandwich panels.

The balance sheet of benefits and harms of breast cancer population-based screening in Europe: outcome research, practice and future challenges.

PubMed

Broeders, Mireille; Paci, Eugenio

2015-11-01

Breast cancer screening programs are still object of harsh debate. In 2012, the Independent UK Panel reviewed the benefits and harms of mammography screening based on randomized trials and the EUROSCREEN Working Group reviewed European observational outcome studies. The conclusion was that screening programs should continue, while acknowledging that harms, such as the occurrence of false-positive results and overdiagnosis, can have a negative impact on a woman's life. Information on the balance sheet of the benefits and harms of breast cancer screening should help women and their physicians to make an informed choice. The future challenge for breast screening programs is to assess the feasibility, acceptability, effectiveness and impact of risk-based screening in order to maximize benefit-to-harm ratios.

SMA Hybrid Composites for Dynamic Response Abatement Applications

NASA Technical Reports Server (NTRS)

Turner, Travis L.

2000-01-01

A recently developed constitutive model and a finite element formulation for predicting the thermomechanical response of Shape Memory Alloy (SMA) hybrid composite (SMAHC) structures is briefly described. Attention is focused on constrained recovery behavior in this study, but the constitutive formulation is also capable of modeling restrained or free recovery. Numerical results are shown for glass/epoxy panel specimens with embedded Nitinol actuators subjected to thermal and acoustic loads. Control of thermal buckling, random response, sonic fatigue, and transmission loss are demonstrated and compared to conventional approaches including addition of conventional composite layers and a constrained layer damping treatment. Embedded SMA actuators are shown to be significantly more effective in dynamic response abatement applications than the conventional approaches and are attractive for combination with other passive and/or active approaches.

Individual payments as a longer-term incentive in online panels.

PubMed

Göritz, Anja S; Wolff, Hans-Georg; Goldstein, Daniel G

2008-11-01

Does it pay to pay online panel members? A three-wave longitudinal experiment was conducted with an online panel to examine whether per person payments, paid through an online intermediary, influence response and retention rates. In the payment condition, participants were promised payment for participation at each wave, whereas control participants were not offered any payment. The promise of a payment had a negative effect on response in Wave 1, but a positive effect on response in Wave 2. Payment had no significant effect on retention. Completing a given wave was an indicator for responding to a subsequent invitation.

Prediction and Measurement of the Vibration and Acoustic Radiation of Panels Subjected to Acoustic Loading

NASA Technical Reports Server (NTRS)

Turner, Travis L.; Rizzi, Stephen A.

1995-01-01

Interior noise and sonic fatigue are important issues in the development and design of advanced subsonic and supersonic aircraft. Conventional aircraft typically employ passive treatments, such as constrained layer damping and acoustic absorption materials, to reduce the structural response and resulting acoustic levels in the aircraft interior. These techniques require significant addition of mass and only attenuate relatively high frequency noise transmitted through the fuselage. Although structural acoustic coupling is in general very important in the study of aircraft fuselage interior noise, analysis of noise transmission through a panel supported in an infinite rigid baffle (separating two semi-infinite acoustic domains) can be useful in evaluating the effects of active/adaptive materials, complex loading, etc. Recent work has been aimed at developing adaptive and/or active methods of controlling the structural acoustic response of panels to reduce the transmitted noise1. A finite element formulation was recently developed to study the dynamic response of shape memory alloy (SMA) hybrid composite panels (conventional composite panel with embedded SMA fibers) subject to combined acoustic and thermal loads2. Further analysis has been performed to predict the far-field acoustic radiation using the finite element dynamic panel response prediction3. The purpose of the present work is to validate the panel vibration and acoustic radiation prediction methods with baseline experimental results obtained from an isotropic panel, without the effect of SMA.

Thermal conductivity of Rene 41 honeycomb panels

NASA Astrophysics Data System (ADS)

Deriugin, V.

1980-12-01

Effective thermal conductivities of Rene 41 panels suitable for advanced space transportation vehicle structures were determined analytically and experimentally for temperature ranges between 20.4K (423 F) and 1186K (1675 F). The cryogenic data were obtained using a cryostat whereas the high temperature data were measured using a heat flow meter and a comparative thermal conductivity instrument respectively. Comparisons were made between analysis and experimental data. Analytical methods appear to provide reasonable definition of the honeycomb panel effective thermal conductivities.

Thermal conductivity of Rene 41 honeycomb panels. [space transportation vehicles

NASA Technical Reports Server (NTRS)

Deriugin, V.

1980-01-01

Effective thermal conductivities of Rene 41 panels suitable for advanced space transportation vehicle structures were determined analytically and experimentally for temperature ranges between 20.4K (423 F) and 1186K (1675 F). The cryogenic data were obtained using a cryostat whereas the high temperature data were measured using a heat flow meter and a comparative thermal conductivity instrument respectively. Comparisons were made between analysis and experimental data. Analytical methods appear to provide reasonable definition of the honeycomb panel effective thermal conductivities.

DOE Radiation Research Program is floundering - NAS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lobsenz, G.

1994-04-20

The Energy Department's radiation health effects research program is floundering in a morass of administrative confusion due to an ill-considered 1990 joint management agreement between DOE and the Health and Human Services Department, a National Academy of Sciences panel says. The NAS panel said the [open quotes]administrative difficulties[close quotes] created by the DOE-HHS agreement appear to be [open quotes]stifling creativity and efficiency within DOE's Epidemiology Research Program, delaying the completion and publication of research.[close quotes] The panel also expressed concern that DOE has failed to adequately fund or staff its health research office, and that the department had no mastermore » research plan to identify research needs or set forth uniform, scientifically rigorous data collection procedures. The panel said DOE's lack of commitment was particularly evident in its failure to set up an effective health surveillance program for its nuclear work force. In addition, the panel said DOE had fallen short on promises to create a comprehensive computer bank of health research data that would be continually updated with new information gleaned from an ongoing worker surveillance program. While recommending enhancements, the NAS panel emphasized that DOE's health research program would not be able to function effectively until the department revamped its joint management agreement with HHS.« less

Estudio de la influencia de la refrigeracion con aire de forma natural e inducida en el comportamiento de instalaciones fotovoltaicas

NASA Astrophysics Data System (ADS)

Mazon Hernandez, Rocio

The aim is to analyse the negative influence of high panel temperatures on electrical production when they are placed on steel roofs of industrial buildings and greenhouse roofs. Different configurations have been tested in order to allow cooling of photovoltaic panels to decrease panel temperature and improve electrical performance. To research this problem two experimental facilities have been built. The first facility includes two panels fixed on a structure. A panel is integrated on a parallel steel plate which does not allow sufficient cooling. Between both surfaces, there is an open air channel in which an air flow is created by the chimney effect thus cooling the panel by natural convection or inducing air, using a fan, by forced convection. The other panel has not any plate underneath it and is used as a referent. The electrical behaviour of the integrated panel has been studied for different air gaps and induced velocities, being also compared with the reference panel. An experimental model was developed to establish correlations which allow determine the panel temperature depending on the influential variables on the cooling ability. This research also analyses the data of a working solar plant, with the same panel model, obtaining the correlations between electrical variables and panel temperature. A comparison with the electrical behaviour in the experimental facility and the solar plant is also presented. The second experimental facility is a replica of a photovoltaic greenhouse. It consists of four photovoltaic panels placed on the plastic roof, providing an open and divergent channel between both surfaces thus creating an air flow by natural convection. This research studies the effect of high temperatures within the greenhouse which is transferred by the roof and thus affects the electrical production. In addition, two air gaps were used and the effect of adding insulating material to the plastic roof was studied. The electrical variables of the panels are analysed to compare and select the best configuration. The presented research provides a deep knowledge of how they work as well as information and results for an improvement in future designs of building integrated photovoltaic systems. Este estudio se centra en analizar la influencia negativa de la temperatura en la produccion electrica de paneles fotovoltaicos al estar emplazados sobre cubierta de acero, como sucede en naves industriales y sobre un invernadero. Se estudian diferentes configuraciones que permitan refrigerar los paneles, reduciendo su temperatura y mejorar su rendimiento. Para abordar este problema, se han construido dos instalaciones experimentales, fieles a plantas solares en funcionamiento. Una instalacion engloba dos paneles fotovoltaicos sobre estructura fija al suelo. Uno de los paneles esta integrado sobre una superficie paralela y metalica. Entre ambas superficies existe un espacio que posibilita circular aire, permitiendo refrigerar el panel por conveccion natural, o conveccion forzada impulsando el aire con un ventilador. El otro panel, libre por su cara posterior y se ha considerado de referencia. Se ha estudiado el comportamiento del panel integrado sobre cubierta para diferentes secciones de aire y velocidades inducidas, comparandolo con el panel de referencia. Se ha desarrollado un modelo experimental que nos permite determinar la temperatura del panel en funcion de las variables que influyen en su refrigeracion. Adicionalmente, se han analizado los datos de una planta solar en funcionamiento, con paneles de igual caracteristicas, obteniendo correlaciones entre la temperatura del panel y las variables electricas y comparandolos con las obtenidas en la instalacion experimental. La segunda instalacion experimental reproduce parte de una instalacion solar sobre un invernadero, formada por cuatro paneles fotovoltaicos colocados sobre el plastico del invernadero, existiendo un canal divergente entre ambas superficies. Se estudia la influencia de las altas temperaturas en el interior del invernadero sobre la produccion electrica de los paneles, decido a la transferencia de calor del interior del invernadero. Ademas, se han ensayado dos separaciones diferentes y para cada una se ha comparado con la misma, utilizando un aislante sobre la cubierta. El estudio realizado sobre ambas instalaciones ha proporcionado un conocimiento profundo del funcionamiento de cada una de ellas, asi como informacion valida para una mejora de futuros disenos de instalaciones fotovoltaicas sobre cubiertas.

Gender Equity Expert Panel: Exemplary & Promising Gender Equity Programs, 2000.

ERIC Educational Resources Information Center

Department of Education, Washington, DC.

The U.S. Department of Education developed the Gender Equity Expert Panel to identify promising and exemplary programs that promote gender equity in and through education. This panel of experts reviewed self-nominated programs to determine whether they met four criteria: evidence of success/effectiveness in promoting gender equity; quality of the…

Mechanical and physical properties of agro-based fiberboard

Treesearch

S. Lee; T.F. Shupe; C.Y. Hse

2006-01-01

In order to better utilize agricultural fibers as an alternative resource for composite panels, several variables were investigated to improve mechanical and physical properties of agm-based fiberboard. This study focused on the effect of fiber morphology, slenderness ratios (UD), and fiber mixing combinations on panel properties. The panel construction types were also...

78 FR 70023 - Response Systems to Adult Sexual Assault Crimes Panel; Notice of Federal Advisory Committee Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-22

... developing recommendations regarding how to improve the effectiveness of such systems. The Panel is... DEPARTMENT OF DEFENSE Office of the Secretary Response Systems to Adult Sexual Assault Crimes... Advisory Committee meeting of the Response Systems to Adult Sexual Assault Crimes Panel. This meeting is...

Progressive Failure Analysis of Composite Stiffened Panels

NASA Technical Reports Server (NTRS)

Bednarcyk, Brett A.; Yarrington, Phillip W.; Collier, Craig S.; Arnold, Steven M.

2006-01-01

A new progressive failure analysis capability for stiffened composite panels has been developed based on the combination of the HyperSizer stiffened panel design/analysis/optimization software with the Micromechanics Analysis Code with Generalized Method of Cells (MAC/GMC). MAC/GMC discretizes a composite material s microstructure into a number of subvolumes and solves for the stress and strain state in each while providing the homogenized composite properties as well. As a result, local failure criteria may be employed to predict local subvolume failure and the effects of these local failures on the overall composite response. When combined with HyperSizer, MAC/GMC is employed to represent the ply level composite material response within the laminates that constitute a stiffened panel. The effects of local subvolume failures can then be tracked as loading on the stiffened panel progresses. Sample progressive failure results are presented at both the composite laminate and the composite stiffened panel levels. Deformation and failure model predictions are compared with experimental data from the World Wide Failure Exercise for AS4/3501-6 graphite/epoxy laminates.

Guns and High Gas Output Devices Panel: Introduction

NASA Technical Reports Server (NTRS)

Simmons, Ronald L.; Kaste, Pamela J.

2000-01-01

A new panel known as the Guns and High Gas Output Panel was organized in 1999 under the auspices of the JANNAF Propellant and Characterization SubCommittee (PDCS). This is an introduction to our first meeting, purpose of the panel, and the scope of activities to be covered. The primary purpose of the panel is very simple: to provide a single focal point for interfacing Government Laboratories (Department of Defense and Department of Energy) and commercial industry researchers to share R&D activities and findings (i.e. facilitate the exchange of information) specifically aimed at gun-launched propulsion and high-gas output devices (gas generators and air bag inflators). Specific areas of interest included in the Panel's scope (and the Technical Data Base) are the following: (1) new propellant formulations and chemistry, (2) new ingredients, (3) ballistic effects of the new formulations and ingredients, (4) new processing methods unique to gun propellants, (5) thermochemistry of new ingredients, (6) unique physical and mechanical properties, (7) burning rates of new propellants and small scale closed bomb testing, (8) plasma effects on the propellant, and (9) unique safety and insensitive munitions properties.

External mean flow influence on sound transmission through finite clamped double-wall sandwich panels

NASA Astrophysics Data System (ADS)

Liu, Yu; Catalan, Jean-Cédric

2017-09-01

This paper studies the influence of an external mean flow on the sound transmission through finite clamped double-wall sandwich panels lined with poroelastic materials. Biot's theory is employed to describe wave propagation in poroelastic materials and various configurations of coupling the poroelastic layer to the facing plates are considered. The clamped boundary of finite panels are dealt with by the modal superposition theory and the weighted residual (Garlekin) method, leading to a matrix equation solution for the sound transmission loss (STL) through the structure. The theoretical model is validated against existing theories of infinite sandwich panels with and without an external flow. The numerical results of a single incident wave show that the external mean flow has significant effects on the STL which are coupled with the clamped boundary effect dominating in the low-frequency range. The external mean flow also influences considerably the limiting incidence angle of the panel system and the effect of the incidence angle on the STL. However, the influences of the azimuthal angle and the external flow orientation are negligible.

Attitudes towards assisted dying are influenced by question wording and order: a survey experiment.

PubMed

Magelssen, Morten; Supphellen, Magne; Nortvedt, Per; Materstvedt, Lars Johan

2016-04-27

Surveys on attitudes towards assisted dying play an important role in informing public debate, policy and legislation. Unfortunately, surveys are often designed with insufficient attention to framing effects; that is, effects on the respondents' stated attitudes caused by question wording and context. The purpose of this study was to demonstrate and measure such framing effects. Survey experiment in which an eight-question survey on attitudes towards assisted dying was distributed to Norwegian citizens through a web-based panel. Two variations of question wording as well as two variations of question order were employed. Respondents were randomized to receive one of four questionnaire versions. Three thousand and fifty responses were received. There were moderate to large question wording and question order effects. A majority of Norwegian citizens favour the legalization of assisted dying for patients with terminal or chronic disease. Stakeholders in the assisted dying debate need to acknowledge potential framing effects, and accordingly should interpret survey results with caution. The same holds for researchers who conduct attitude surveys in the field of bioethics.

A bacterial bioreporter panel to assay the cytotoxicity of atmospheric particulate matter

NASA Astrophysics Data System (ADS)

Kessler, Nivi; Schauer, James J.; Yagur-Kroll, Sharon; Melamed, Sahar; Tirosh, Ofir; Belkin, Shimshon; Erel, Yigal

2012-12-01

Numerous studies have demonstrated that elevated concentrations of suspended atmospheric particulate matter (PM) are associated with adverse health effects. In order to minimize the adverse public health effects of atmospheric PM by exposure management, there is a need for a greater understanding of the toxic mechanisms and the components that are responsible for the toxic effects. The aim of this study was to utilize bioassay techniques to investigate these aspects. For this purpose a reporter panel of 9 genetically engineered bacterial (Escherichia coli) strains was composed. Each panel member was designed to report on a different stress condition with a measurable light signal produced by the luciferase enzyme. Toxic mechanisms and components were studied using six anthropogenic PM source samples, including two vehicle combustion particles, three coal fly ash (CFA) samples and an urban dust sample. The most prominent outcome of the panel exposure results were broad panel responses observed for two of the CFA samples, indicating oxidative stress, respiration inhibition and iron deficiency. These responses were relieved when the samples were treated with EDTA, a non-specific metal chelator, suggesting the involvement of metals in the observed effects. Bioavailability analysis of the samples suggests that chromium was related to the toxic responses induced by two of the CFA samples. Oxidative stress was also observed in several samples of ambient atmospheric aerosols and excess metal toxicity in an urban dust sample collected in a parking lot. The reporter panel approach, as demonstrated in this study, has the potential of providing novel insights as to the mechanisms of atmospheric PM toxicity. Furthermore, combining the panel's results with bioavailability data can enlighten about the role of different PM components in the observed toxicity.

Evaluation and Validation: A Look at the Program Effectiveness Panel.

ERIC Educational Resources Information Center

Cook, Nancy R.; And Others

The work of the Program Effectiveness Panel (PEP) of the United States Department of Education was examined. The PEP is the Department of Education's primary means of certifying or validating the effectiveness of educational programs. Thirty-three educational programs were validated by the PEP between January 1988 and December 1990. Over time,…

Damage detection and isolation via autocorrelation: a step toward passive sensing

NASA Astrophysics Data System (ADS)

Chang, Y. S.; Yuan, F. G.

2018-03-01

Passive sensing technique may eliminate the need of expending power from actuators and thus provide a means of developing a compact and simple structural health monitoring system. More importantly, it may provide a solution for monitoring the aircraft subjected to environmental loading from air flow during operation. In this paper, a non-contact auto-correlation based technique is exploited as a feasibility study for passive sensing application to detect damage and isolate the damage location. Its theoretical basis bears some resemblance to reconstructing Green's function from diffusive wavefield through cross-correlation. Localized high pressure air from air compressor are randomly and continuously applied on the one side surface of the aluminum panels through the air blow gun. A laser Doppler vibrometer (LDV) was used to scan a 90 mm × 90 mm area to create a 6 × 6 2D-array signals from the opposite side of the panels. The scanned signals were auto-correlated to reconstruct a "selfimpulse response" (or Green's function). The premise for stably reconstructing the accurate Green's function requires long sensing times. For a 609.6 mm × 609.6 mm flat aluminum panel, the sensing times roughly at least four seconds is sufficient to establish converged Green's function through correlation. For the integral stiffened aluminum panel, the geometrical features of the panel expedite the formation of the diffusive wavefield and thus shorten the sensing times. The damage is simulated by gluing a magnet onto the panels. Reconstructed Green's functions (RGFs) are used for damage detection and damage isolation based on an imaging condition with mean square deviation of the RGFs from the pristine and the damaged structure and the results are shown in color maps. The auto-correlation based technique is shown to consistently detect the simulated damage, image and isolate the damage in the structure subjected to high pressure air excitation. This technique may be transformed into passive sensing applied on the aircraft during operation.

Laboratory and Modeling Studies of Insect Swarms

DTIC Science & Technology

2016-03-10

and measuring the response. These novel methods allowed us for the first time to characterize precisely properties of the swarm at the group level... Time series for a randomly chosen pair as well as its continuous wavelet transform (CWT; bottom panel). Nearly all of the power in the signal for... based time -frequency analysis to identify such transient interactions, as long as they modified the frequency structure of the insect flight

An analytical and experimental investigation of active structural acoustic control of noise transmission through double panel systems

NASA Astrophysics Data System (ADS)

Carneal, James P.; Fuller, Chris R.

2004-05-01

An analytical and experimental investigation of active control of sound transmission through double panel systems has been performed. The technique used was active structural acoustic control (ASAC) where the control inputs, in the form of piezoelectric actuators, were applied to the structure while the radiating pressure field was minimized. Results verify earlier experimental investigations and indicate the application of control inputs to the radiating panel of the double panel system resulted in greater transmission loss (TL) due to its direct effect on the nature of the structural-acoustic (or radiation) coupling between the radiating panel and the receiving acoustic space. Increased control performance was seen in a double panel system consisting of a stiffer radiating panel due to its lower modal density and also as a result of better impedance matching between the piezoelectric actuator and the radiating plate. In general the results validate the ASAC approach for double panel systems, demonstrating that it is possible to take advantage of double panel system passive behavior to enhance control performance, and provide design guidelines.

Simplified Calculation Model and Experimental Study of Latticed Concrete-Gypsum Composite Panels

PubMed Central

Jiang, Nan; Ma, Shaochun

2015-01-01

In order to address the performance complexity of the various constituent materials of (dense-column) latticed concrete-gypsum composite panels and the difficulty in the determination of the various elastic constants, this paper presented a detailed structural analysis of the (dense-column) latticed concrete-gypsum composite panel and proposed a feasible technical solution to simplified calculation. In conformity with mechanical rules, a typical panel element was selected and divided into two homogenous composite sub-elements and a secondary homogenous element, respectively for solution, thus establishing an equivalence of the composite panel to a simple homogenous panel and obtaining the effective formulas for calculating the various elastic constants. Finally, the calculation results and the experimental results were compared, which revealed that the calculation method was correct and reliable and could meet the calculation needs of practical engineering and provide a theoretical basis for simplified calculation for studies on composite panel elements and structures as well as a reference for calculations of other panels. PMID:28793631

Solar panel thermal cycling testing by solar simulation and infrared radiation methods

NASA Technical Reports Server (NTRS)

Nuss, H. E.

1980-01-01

For the solar panels of the European Space Agency (ESA) satellites OTS/MAROTS and ECS/MARECS the thermal cycling tests were performed by using solar simulation methods. The performance data of two different solar simulators used and the thermal test results are described. The solar simulation thermal cycling tests for the ECS/MARECS solar panels were carried out with the aid of a rotatable multipanel test rig by which simultaneous testing of three solar panels was possible. As an alternative thermal test method, the capability of an infrared radiation method was studied and infrared simulation tests for the ultralight panel and the INTELSAT 5 solar panels were performed. The setup and the characteristics of the infrared radiation unit using a quartz lamp array of approx. 15 sq and LN2-cooled shutter and the thermal test results are presented. The irradiation uniformity, the solar panel temperature distribution, temperature changing rates for both test methods are compared. Results indicate the infrared simulation is an effective solar panel thermal testing method.

Simplified Calculation Model and Experimental Study of Latticed Concrete-Gypsum Composite Panels.

PubMed

Jiang, Nan; Ma, Shaochun

2015-10-27

In order to address the performance complexity of the various constituent materials of (dense-column) latticed concrete-gypsum composite panels and the difficulty in the determination of the various elastic constants, this paper presented a detailed structural analysis of the (dense-column) latticed concrete-gypsum composite panel and proposed a feasible technical solution to simplified calculation. In conformity with mechanical rules, a typical panel element was selected and divided into two homogenous composite sub-elements and a secondary homogenous element, respectively for solution, thus establishing an equivalence of the composite panel to a simple homogenous panel and obtaining the effective formulas for calculating the various elastic constants. Finally, the calculation results and the experimental results were compared, which revealed that the calculation method was correct and reliable and could meet the calculation needs of practical engineering and provide a theoretical basis for simplified calculation for studies on composite panel elements and structures as well as a reference for calculations of other panels.

Elevated-Temperature Tests Under Static and Aerodynamic Conditions on Honeycomb-Core Sandwich Panels

NASA Technical Reports Server (NTRS)

Groen, Joseph M.; Johnson, Aldie E., Jr.

1959-01-01

Stainless-steel honeycomb-core sandwich panels which differed primarily in skin thicknesses were tested at elevated temperatures under static and aerodynamic conditions. The results of these tests were evaluated to determine the insulating effectiveness and structural integrity of the panels. The static radiant-heating tests were performed in front of a quartz-tube radiant heater at panel skin temperatures up to 1,5000 F. The aerodynamic tests were made in a Mach 1.4 heated blowdown wind tunnel. The tunnel temperature was augmented by additional heat supplied by a radiant heater which raised the panel surface temperature above 8000 F during air flow. Static radiant-heating tests of 2 minutes duration showed that all the panels protected the load-carrying structure about equally well. Thin-skin panels showed an advantage for this short-time test over thick-skin panels from a standpoint of weight against insulation. Permanent inelastic strains in the form of local buckles over each cell of the honeycomb core caused an increase in surface roughness. During the aero- dynamic tests all of the panels survived with little or no damage, and panel flutter did not occur.

Sound transmission analysis of partially treated MR fluid-based sandwich panels using finite element method

NASA Astrophysics Data System (ADS)

Hemmatian, M.; Sedaghati, R.

2017-04-01

This study aims at developing a finite element model to predict the sound transmission loss (STL) of a multilayer panel partially treated with a Magnetorheological (MR) fluid core layer. MR fluids are smart materials with promising controllable rheological characteristics in which the application of an external magnetic field instantly changes their rheological properties. Partial treatment of sandwich panels with MR fluid core layer provides an opportunity to change stiffness and damping of the structure without significantly increasing the mass. The STL of a finite sandwich panel partially treated with MR fluid is modeled using the finite element (FE) method. Circular sandwich panels with clamped boundary condition and elastic face sheets in which the core layer is segmented circumferentially is considered. The MR fluid core layer is considered as a viscoelastic material with complex shear modulus with the magnetic field and frequency dependent storage and loss moduli. Neglecting the effect of the panel's vibration on the pressure forcing function, the work done by the acoustic pressure is expressed as a function of the blocked pressure in order to calculate the force vector in the equation of the motion of the panel. The governing finite element equation of motion of the MR sandwich panel is then developed to predict the transverse vibration of the panel which can then be utilized to obtain the radiated sound using Green's function. The developed model is used to conduct a systematic parametric study on the effect of different locations of MR fluid treatment on the natural frequencies and the STL.

Global status of recycling waste solar panels: A review.

PubMed

Xu, Yan; Li, Jinhui; Tan, Quanyin; Peters, Anesia Lauren; Yang, Congren

2018-05-01

With the enormous growth in the development and utilization of solar-energy resources, the proliferation of waste solar panels has become problematic. While current research into solar panels has focused on how to improve the efficiency of the production capacity, the dismantling and recycling of end-of-life (EOL) panels are seldom considered, as can be seen, for instance, in the lack of dedicated solar-panel recycling plants. EOL solar-panel recycling can effectively save natural resources and reduce the cost of production. To address the environmental conservation and resource recycling issues posed by the huge amount of waste solar panels regarding environmental conservation and resource recycling, the status of the management and recycling technologies for waste solar panels are systemically reviewed and discussed in this article. This review can provide a quantitative basis to support the recycling of PV panels, and suggests future directions for public policy makers. At present, from the technical aspect, the research on solar panel recovery is facing many problems, and we need to further develop an economically feasible and non-toxic technology. The research on solar photovoltaic panels' management at the end of life is just beginning in many countries, and there is a need for further improvement and expansion of producer responsibility. Copyright © 2018 Elsevier Ltd. All rights reserved.

Effect of panel shape on hydrodynamic performances of vertical v-shaped double- slotted cambered otter-board

NASA Astrophysics Data System (ADS)

Wang, Lei; Zhang, Xun; Wang, Lu Min; Huang, Hong Liang; Zhang, Yu; Liu, Yong Li; Feng, Wei Dong; Zhang, Rong Jun

2018-06-01

The effect of panel shape on hydrodynamic performances of a vertical v-shaped double-slotted cambered otter-board was investigated using engineering models in a wind tunnel. Three different shape panels (rhomboid, left trapezoid and isosceles trapezoid) were evaluated at a wind speed of 28 m/s. Parameters measured included: drag coefficient Cx, lift coefficient Cy, pitch moment coefficient Cm, center of pressure coefficient Cp , over a range of angle of attack (0° to 70°). These coefficients were used in analyzing the differences in the performance among the three otter-board models. Results showed that the maximum lift coefficient Cy of the otter-board model with the isosceles trapezoid shape panels was highest (2.103 at α=45°). The maximum Cy/Cx of the otter-board with the rhomboid shape panels was highest (3.976 at α=15°). A comparative analysis of Cm and Cp showed that the stability of otter-board model with the isosceles trapezoid shape panels is better in pitch, and the stability of otter-board model with the left trapezoid shape panels is better in roll. The findings of this study can offer useful reference data for the structural optimization of otter-boards for trawling.

Very early diagnosis of chest pain by point-of-care testing: comparison of the diagnostic efficiency of a panel of cardiac biomarkers compared with troponin measurement alone in the RATPAC trial.

PubMed

Collinson, Paul; Goodacre, Steve; Gaze, David; Gray, Alasdair

2012-02-01

To assess the impact of triple marker testing on patient management and the diagnostic efficiencies of different biomarker strategies examined. A prospective randomised trial of triple marker testing by point-of-care testing (POCT); the Randomised Assessment of Panel Assay of Cardiac markers (RATPAC) study. Six emergency departments. Low-risk patients presenting with chest pain to diagnostic assessment with a cardiac panel measured by POCT or to diagnosis when biomarker measurement was based on central laboratory testing. Interventions 1125 patients were randomly assigned to POCT measurement of the triple marker panel of cardiac troponin I (cTnI), myoglobin and the MB isoenzyme of creatine kinase (CK-MB) on admission and 90 min from admission. Myocardial infarction (MI) was defined by the universal definition of MI. The following diagnostic strategies were compared by receiver operator characteristic (ROC) curve analysis and comparison of area under the curve (AUC): individual marker values, change (Δ) in CK-MB and myoglobin and the combination of presentation or 90 min value plus Δ value. Admission sample measurement of cTnI was the most diagnostically efficient AUC 0.96 (0.93-0.98) with areas under the ROC curve statistically significantly greater than CK-MB 0.85 (0.80-0.90) and myoglobin 0.75 (0.68-0.81). At 90 min cTnI measurement had the highest AUC 0.95 (0.87-1.00) but was statistically significantly different only from Δmyoglobin and ΔCK-MB. Measurement of cTnI alone is sufficient for diagnosis. Measurement of a marker panel does not facilitate diagnosis.

A four-kallikrein panel for the prediction of repeat prostate biopsy: data from the European Randomized Study of Prostate Cancer screening in Rotterdam, Netherlands.

PubMed

Gupta, A; Roobol, M J; Savage, C J; Peltola, M; Pettersson, K; Scardino, P T; Vickers, A J; Schröder, F H; Lilja, H

2010-08-24

Most men with elevated levels of prostate-specific antigen (PSA) do not have prostate cancer, leading to a large number of unnecessary biopsies. A statistical model based on a panel of four kallikreins has been shown to predict the outcome of a first prostate biopsy. In this study, we apply the model to an independent data set of men with previous negative biopsy but persistently elevated PSA. The study cohort consisted of 925 men with a previous negative prostate biopsy and elevated PSA (>or=3 ng ml(-1)), with 110 prostate cancers detected (12%). A previously published statistical model was applied, with recalibration to reflect the lower positive biopsy rates on rebiopsy. The full-kallikrein panel had higher discriminative accuracy than PSA and DRE alone, with area under the curve (AUC) improving from 0.58 (95% confidence interval (CI): 0.52, 0.64) to 0.68 (95% CI: 0.62, 0.74), P<0.001, and high-grade cancer (Gleason >or=7) at biopsy with AUC improving from 0.76 (95% CI: 0.64, 0.89) to 0.87 (95% CI: 0.81, 0.94), P=0.003). Application of the panel to 1000 men with persistently elevated PSA after initial negative biopsy, at a 15% risk threshold would reduce the number of biopsies by 712; would miss (or delay) the diagnosis of 53 cancers, of which only 3 would be Gleason 7 and the rest Gleason 6 or less. Our data constitute an external validation of a previously published model. The four-kallikrein panel predicts the result of repeat prostate biopsy in men with elevated PSA while dramatically decreasing unnecessary biopsies.

Large Coded Aperture Mask for Spaceflight Hard X-ray Images

NASA Technical Reports Server (NTRS)

Vigneau, Danielle N.; Robinson, David W.

2002-01-01

The 2.6 square meter coded aperture mask is a vital part of the Burst Alert Telescope on the Swift mission. A random, but known pattern of more than 50,000 lead tiles, each 5 mm square, was bonded to a large honeycomb panel which projects a shadow on the detector array during a gamma ray burst. A two-year development process was necessary to explore ideas, apply techniques, and finalize procedures to meet the strict requirements for the coded aperture mask. Challenges included finding a honeycomb substrate with minimal gamma ray attenuation, selecting an adhesive with adequate bond strength to hold the tiles in place but soft enough to allow the tiles to expand and contract without distorting the panel under large temperature gradients, and eliminating excess adhesive from all untiled areas. The largest challenge was to find an efficient way to bond the > 50,000 lead tiles to the panel with positional tolerances measured in microns. In order to generate the desired bondline, adhesive was applied and allowed to cure to each tile. The pre-cured tiles were located in a tool to maintain positional accuracy, wet adhesive was applied to the panel, and it was lowered to the tile surface with synchronized actuators. Using this procedure, the entire tile pattern was transferred to the large honeycomb panel in a single bond. The pressure for the bond was achieved by enclosing the entire system in a vacuum bag. Thermal vacuum and acoustic tests validated this approach. This paper discusses the methods, materials, and techniques used to fabricate this very large and unique coded aperture mask for the Swift mission.

Transplanting Sensitized Kidney Transplant Patients With Equivalent Outcomes Utilizing Stringent HLA Crossmatching.

PubMed

Rohan, Vinayak S; Taber, David J; Moussa, Omar; Pilch, Nicole A; Denmark, Signe; Meadows, Holly B; McGillicuddy, John W; Chavin, Kenneth D; Baliga, Prabhakar K; Bratton, Charles F

2017-02-01

Elevated panel reactive antibody levels have been traditionally associated with increased acute rejection rate and decreased long-term graft survival after kidney transplant. In this study, our objective was to determine patient and allograft outcomes in sensitized kidney transplant recipients with advanced HLA antibody detection and stringent protein sequence epitope analyses. This was a subanalysis of a prospective, risk-stratified randomized controlled trial that compared interleukin 2 receptor antagonist to rabbit antithymocyte globulin induction in 200 kidney transplant recipients, examining outcomes based on panel reactive antibody levels of < 20% (low) versus ≥ 20% (high, sensitized). The study was conducted between February 2009 and July 2011. All patients underwent solid-phase single antigen bead assays to detect HLA antibodies and stringent HLA epitope analyses with protein sequence alignment for virtual crossmatching. Delayed graft function, acute rejection rates, and graft loss were the main outcomes measured. Both the low (134 patients) and high (66 patients) panel reactive antibody level cohorts had equivalent induction and maintenance immunosuppression. Patients in the high-level group were more likely to be female (P < .001), African American (P < .001), and received a kidney from a deceased donor (P = .004). Acute rejection rates were similar between the low (rate of 8%) and high (rate of 9%) panel reactive antibody groups (P = .783). Delayed graft function, borderline rejection, graft loss, and death were not different between groups. Multivariate analyses demonstrated delayed graft function to be the strongest predictor of acute rejection (odds ratio, 5.7; P = .005); panel reactive antibody level, as a continuous variable, had no significant correlation with acute rejection (C statistic, 0.48; P = .771). Appropriate biologic matching with single antigen bead assays and stringent epitope analyses provided excellent outcomes in sensitized patients regardless of the induction therapy choice.

The Effect of Minimum Wages on Youth Employment in Canada: A Panel Study.

ERIC Educational Resources Information Center

Yuen, Terence

2003-01-01

Canadian panel data 1988-90 were used to compare estimates of minimum-wage effects based on a low-wage/high-worker sample and a low-wage-only sample. Minimum-wage effect for the latter is nearly zero. Different results for low-wage subgroups suggest a significant effect for those with longer low-wage histories. (Contains 26 references.) (SK)

Effect of panel shape of soccer ball on its flight characteristics

PubMed Central

Hong, Sungchan; Asai, Takeshi

2014-01-01

Soccer balls are typically constructed from 32 pentagonal and hexagonal panels. Recently, however, newer balls named Cafusa, Teamgeist 2, and Jabulani were respectively produced from 32, 14, and 8 panels with shapes and designs dramatically different from those of conventional balls. The newest type of ball, named Brazuca, was produced from six panels and will be used in the 2014 FIFA World Cup in Brazil. There have, however, been few studies on the aerodynamic properties of balls constructed from different numbers and shapes of panels. Hence, we used wind tunnel tests and a kick-robot to examine the relationship between the panel shape and orientation of modern soccer balls and their aerodynamic and flight characteristics. We observed a correlation between the wind tunnel test results and the actual ball trajectories, and also clarified how the panel characteristics affected the flight of the ball, which enabled prediction of the trajectory. PMID:24875291

Scattering Effects of Solar Panels on Space Station Antenna Performance

NASA Technical Reports Server (NTRS)

Panneton, Robert J.; Ngo, John C.; Hwu, Shian U.; Johnson, Larry A.; Elmore, James D.; Lu, Ba P.; Kelley, James S.

1994-01-01

Characterizing the scattering properties of the solar array panels is important in predicting Space Station antenna performance. A series of far-field, near-field, and radar cross section (RCS) scattering measurements were performed at S-Band and Ku-Band microwave frequencies on Space Station solar array panels. Based on investigation of the measured scattering patterns, the solar array panels exhibit similar scattering properties to that of the same size aluminum or copper panel mockup. As a first order approximation, and for worse case interference simulation, the solar array panels may be modeled using perfect reflecting plates. Numerical results obtained using the Geometrical Theory of Diffraction (GTD) modeling technique are presented for Space Station antenna pattern degradation due to solar panel interference. The computational and experimental techniques presented in this paper are applicable for antennas mounted on other platforms such as ship, aircraft, satellite, and space or land vehicle.

POSTOP: Postbuckled open-stiffener optimum panels, user's manual

NASA Technical Reports Server (NTRS)

Biggers, S. B.; Dickson, J. N.

1984-01-01

The computer program POSTOP developed to serve as an aid in the analysis and sizing of stiffened composite panels that may be loaded in the postbuckling regime, is intended for the preliminary design of metal or composite panels with open-section stiffeners, subjected to multiple combined biaxial compression (or tension), shear and normal pressure load cases. Longitudinal compression, however, is assumed to be the dominant loading. Temperature, initial bow eccentricity and load eccentricity effects are included. The panel geometry is assumed to be repetitive over several bays in the longitudinal (stiffener) direction as well as in the transverse direction. Analytical routines are included to compute panel stiffnesses, strains, local and panel buckling loads, and skin/stiffener interface stresses. The resulting program is applicable to stiffened panels as commonly used in fuselage, wing, or empennage structures. The capabilities and limitations of the code are described. Instructions required to use the program and several example problems are included.

Effect of panel shape of soccer ball on its flight characteristics

NASA Astrophysics Data System (ADS)

Hong, Sungchan; Asai, Takeshi

2014-05-01

Soccer balls are typically constructed from 32 pentagonal and hexagonal panels. Recently, however, newer balls named Cafusa, Teamgeist 2, and Jabulani were respectively produced from 32, 14, and 8 panels with shapes and designs dramatically different from those of conventional balls. The newest type of ball, named Brazuca, was produced from six panels and will be used in the 2014 FIFA World Cup in Brazil. There have, however, been few studies on the aerodynamic properties of balls constructed from different numbers and shapes of panels. Hence, we used wind tunnel tests and a kick-robot to examine the relationship between the panel shape and orientation of modern soccer balls and their aerodynamic and flight characteristics. We observed a correlation between the wind tunnel test results and the actual ball trajectories, and also clarified how the panel characteristics affected the flight of the ball, which enabled prediction of the trajectory.

Study of double wall panels for use in propeller driven aircraft

NASA Technical Reports Server (NTRS)

Atwal, M.; Bernhard, R.

1984-01-01

Propeller driven aircraft have exhibited high levels of interior noise. Most absorption materials are not effective at low frequencies where maximum noise levels occur. Two panels separated by an air gap are suggested as an alternative means of noise attenuation. This design produces an impedance mismatch where a sound wave travels backwards to the source. The higher the impedance, the higher the reflected soundwave intensity. Two aluminum panels with helium in between and two panels with one being perforated were investigated. Helium increases the transmission loss because of a greater impedance mismatch than air. The transmission loss of the unperforated panel is higher throughout the frequency range tested.

Field-incidence transmission of treated orthotropic and laminated composite panels

NASA Technical Reports Server (NTRS)

Koval, L. R.

1983-01-01

In an effort to improve understanding of the phenomenon of noise transmission through the sidewalls of an aircraft fuselage, an analytical model was developed for the field incidence transmission loss of an orthotropic or laminated composite infinite panel with layers of various noise insulation treatments. The model allows for four types of treatments, impervious limp septa, orthotropic trim panels, porous blankets, and air spaces, while it also takes into account the effects of forward speed. Agreement between the model and transmission loss data for treated panels is seen to be fairly good overall. In comparison with transmission loss data for untreated composite panels, excellent agreement occurred.

Study of double wall panels for use in propeller driven aircraft

NASA Astrophysics Data System (ADS)

Atwal, M.; Bernhard, R.

1984-05-01

Propeller driven aircraft have exhibited high levels of interior noise. Most absorption materials are not effective at low frequencies where maximum noise levels occur. Two panels separated by an air gap are suggested as an alternative means of noise attenuation. This design produces an impedance mismatch where a sound wave travels backwards to the source. The higher the impedance, the higher the reflected soundwave intensity. Two aluminum panels with helium in between and two panels with one being perforated were investigated. Helium increases the transmission loss because of a greater impedance mismatch than air. The transmission loss of the unperforated panel is higher throughout the frequency range tested.

Sound transmission through double panel constructions lined with elastic porous materials

NASA Astrophysics Data System (ADS)

Bolton, J. S.; Green, E. R.

1986-07-01

Attention is given to a theory governing one-dimensional wave motion in elastic porous materials which is capable of reproducing experimental transmission measurements for unfaced polyurethane foam layers. Calculations of the transmission loss of fuselage-like foam-lined double panels are presented and it is shown that the foam/panel boundary conditions have a large effect on the panel performance; a hybrid arrangement whereby the foam is bonded directly to one panel and separated from the other by a thin air gap appears to be the most advantageous under practical circumstances. With this configuratiom, the mass-air-mass resonance is minimized and increased low-frequency performance is offered.

Effects of export concentration on CO2 emissions in developed countries: an empirical analysis.

PubMed

Apergis, Nicholas; Can, Muhlis; Gozgor, Giray; Lau, Chi Keung Marco

2018-03-08

This paper provides the evidence on the short- and the long-run effects of the export product concentration on the level of CO 2 emissions in 19 developed (high-income) economies, spanning the period 1962-2010. To this end, the paper makes use of the nonlinear panel unit root and cointegration tests with multiple endogenous structural breaks. It also considers the mean group estimations, the autoregressive distributed lag model, and the panel quantile regression estimations. The findings illustrate that the environmental Kuznets curve (EKC) hypothesis is valid in the panel dataset of 19 developed economies. In addition, it documents that a higher level of the product concentration of exports leads to lower CO 2 emissions. The results from the panel quantile regressions also indicate that the effect of the export product concentration upon the per capita CO 2 emissions is relatively high at the higher quantiles.

Thermal neutron shield and method of manufacture

DOEpatents

Metzger, Bert Clayton; Brindza, Paul Daniel

2014-03-04

A thermal neutron shield comprising boron shielding panels with a high percentage of the element Boron. The panel is least 46% Boron by weight which maximizes the effectiveness of the shielding against thermal neutrons. The accompanying method discloses the manufacture of boron shielding panels which includes enriching the pre-cursor mixture with varying grit sizes of Boron Carbide.

What You Can--and Can't--Do with Three-Wave Panel Data

ERIC Educational Resources Information Center

Vaisey, Stephen; Miles, Andrew

2017-01-01

The recent change in the general social survey (GSS) to a rotating panel design is a landmark development for social scientists. Sociological methodologists have argued that fixed-effects (FE) models are generally the best starting point for analyzing panel data because they allow analysts to control for unobserved time-constant heterogeneity. We…

A randomized controlled trial to evaluate the Make Safe Happen® app-a mobile technology-based safety behavior change intervention for increasing parents' safety knowledge and actions.

PubMed

McKenzie, Lara B; Roberts, Kristin J; Clark, Roxanne; McAdams, Rebecca; Abdel-Rasoul, Mahmoud; Klein, Elizabeth G; Keim, Sarah A; Kristel, Orie; Szymanski, Alison; Cotton, Christopher G; Shields, Wendy C

2018-03-12

Many unintentional injuries that occur in and around the home can be prevented through the use of safety equipment and by consistently following existing safety recommendations. Unfortunately, uptake of these safety behaviors is unacceptably low. This paper describes the design of the Make Safe Happen® smartphone application evaluation study, which aims to evaluate a mobile technology-based safety behavior change intervention on parents' safety knowledge and actions. Make Safe Happen® app evaluation study is a randomized controlled trial. Participants will be parents of children aged 0-12 years who are recruited from national consumer online survey panels. Parents will complete a pretest survey, and will be randomized to receive the Make Safe Happen® app or a non-injury-related app, and then complete a posttest follow-up survey after 1 week. Primary outcomes are: (1) safety knowledge; (2) safety behaviors; (3) safety device acquisition and use, and (4) behavioral intention to take safety actions. Anticipated study results are presented. Wide-reaching interventions, to reach substantial parent and caregiver audiences, to effectively reduce childhood injuries are needed. This study will contribute to the evidence-base about how to increase safety knowledge and actions to prevent home-related injuries in children. NCT02751203 ; Pre-results.

Investigation on the Acoustic Absorption of Flexible Micro-Perforated Panel with Ultra-Micro Perforations

NASA Astrophysics Data System (ADS)

Li, Guoxin; Tang, Xiaoning; Zhang, Xiaoxiao; Qian, Y. J.; Kong, Deyi

2017-11-01

Flexible micro-perforated panel has unique advantages in noise reduction due to its good flexibility compared with traditional rigid micro-perforated panel. In this paper, flexible micro-perforated panel was prepared by computer numerical control (CNC) milling machine. Three kinds of plastics including polyvinylchloride (PVC), polyethylene terephthalate (PET), and polyimide (PI) were taken as the matrix materials to prepare flexible micro-perforated panel. It has been found that flexible micro-perforated panel made of PET possessing good porosity and proper density, elastic modulus and poisson ratio exhibited the best acoustic absorption properties. The effects of various structural parameters including perforation diameter, perforation ratio, thickness and air gap have also been investigated, which would be helpful to the optimization of acoustic absorption properties.

Photoelectric panel with equatorial mounting of drive

NASA Astrophysics Data System (ADS)

Kukhta, M. S.; Krauinsh, P. Y.; Krauinsh, D. P.; Sokolov, A. P.; Mainy, S. B.

2018-03-01

The relevance of the work is determined by the need to create effective models for sunny energy. The article considers a photoelectric panel equipped with a system for tracking the sun. Efficiency of the system is provided by equatorial mounting, which compensates for the rotation of the Earth by rotating the sunny panel in the plane of the celestial equator. The specificity of climatic and geographical conditions of Tomsk is estimated. The dynamics of power variations of photoelectric panels with equatorial mounting during seasonal fluctuations in Tomsk is calculated. A mobile photovoltaic panel with equatorial mounting of the drive has been developed. The methods of design strategy for placing photovoltaic panels in the architectural environment of the city are presented. Key words: sunny energy, photovoltaics, equatorial mounting, mechatronic model, wave reducer, electric drive.

Exploring longitudinal shifts in international nurse migration to the United States between 2003 and 2013 through a random effects panel data analysis.

PubMed

Squires, Allison; Ojemeni, Melissa T; Jones, Simon

2016-06-30

No study has examined the longitudinal trends in National Council Licensure Exam for Registered Nurse (NCLEX-RN) applicants and pass rates among internationally-educated nurses (IENs) seeking to work in the United States, nor has any analysis explored the impact of specific events on these trends, including changes to the NCLEX-RN exam, the role of the economic crisis, or the passing of the WHO Code on the International Recruitment of Health Personnel. This study seeks to understand the impact of the three aforementioned factors that may be influencing current and future IEN recruitment patterns in the United States. In this random effects panel data analysis, we analyzed 11 years (2003-2013) of annual IEN applicant numbers and pass rates for registered nurse credentialing. Data were obtained from publicly available reports on exam pass rates. With the global economic crisis and NCLEX-RN changes in 2008 coupled with the WHO Code passage in 2010, we sought to compare if (1) the number of applicants changed significantly after those 2 years and (2) if pass rates changed following exam modifications implemented in 2008 and 2011. A total of 177 countries were eligible for inclusion in this analysis, representing findings from 200,453 IEN applicants to the United States between 2003 and 2013. The majority of applicants were from the Philippines (58 %) and India (11 %), with these two countries combined representing 69 % of the total. Candidates from Sub-Saharan African countries totalled 7133 (3 % of all applications) over the study period, with half of these coming from Nigeria alone. No significant changes were found in the number of candidates following the 2008 economic crisis or the 2010 WHO Code, although pass rates decreased significantly following the 2008 exam modifications and the WHO Code implementation. This study suggests that, while the WHO Code has had an influence on overall IEN migration dynamics to the United States by decreasing candidate numbers, in most cases, the WHO Code was not the single cause of these fluctuations. Indeed, the impact of the NCLEX-RN exam changes appears to exert a larger influence.

Association mapping for yield and grain quality traits in rice (Oryza sativa L.)

PubMed Central

2010-01-01

Association analysis was applied to a panel of accessions of Embrapa Rice Core Collection (ERiCC) with 86 SSR and field data from two experiments. A clear subdivision between lowland and upland accessions was apparent, thereby indicating the presence of population structure. Thirty-two accessions with admixed ancestry were identified through structure analysis, these being discarded from association analysis, thus leaving 210 accessions subdivided into two panels. The association of yield and grain-quality traits with SSR was undertaken with a mixed linear model, with markers and subpopulation as fixed factors, and kinship matrix as a random factor. Eight markers from the two appraised panels showed significant association with four different traits, although only one (RM190) maintained the marker-trait association across years and cultivation. The significant association detected between amylose content and RM190 was in agreement with previous QTL analyses in the literature. Herein, the feasibility of undertaking association analysis in conjunction with germplasm characterization was demonstrated, even when considering low marker density. The high linkage disequilibrium expected in rice lines and cultivars facilitates the detection of marker-trait associations for implementing marker assisted selection, and the mining of alleles related to important traits in germplasm. PMID:21637426

Effects of Fusion Tack Welds on Self-Reacting Friction Stir Welds

NASA Technical Reports Server (NTRS)

Nunes, A. C., Jr.; Pendleton, M. L.; Brooke, S. A.; Russell, C. K.

2012-01-01

In order to know whether fusion tack welds would affect the strength of self-reacting friction stir seam welds in 2195-T87 aluminum alloy, the fracture stresses of 144 tensile test coupons cut from 24 welded panels containing segments of friction stir welds were measured. Each of the panels was welded under unique processing conditions. A measure of the effect of the tack welds for each panel was devised. An analysis of the measures of the tack weld effect supported the hypothesis that fusion tack welds do not affect the strength of self-reacting friction stir welds to a 5% level of confidence.

Development of technology for the fabrication of reliable laminar flow control panels on subsonic transports

NASA Technical Reports Server (NTRS)

1976-01-01

The feasibility of using porous composite materials (Kevlar, Doweave, and Leno Weave) as lightweight, efficient laminar flow control (LFC) surface materials is compared to the metallic 319L stainless Dynapore surfaces and electron beam drilled composite surfaces. Areas investigated include: (1) selection of the LFC-suitable surface materials, structural materials, and fabrication techniques for the LFC aircraft skins; (2) aerodynamic static air flow test results in terms of pressure drop through the LFC panel and the corresponding effective porosity; (3) structural design definition and analyses of the panels, and (4) contamination effects on static drop and effective porosity. Conclusions are presented and discussed.

Targeted gene panels and microbiota analysis provide insight into the effects of effects of alternative production diet formulations on channel catfish nutritional physiology

USDA-ARS?s Scientific Manuscript database

The present research evaluated targeted gene panels and microbiota analysis to provide greater insight into the effects of alternatively-sourced dietary ingredients on production indices, gut health, changes in the gut microbiota and genes involved in the regulation of appetite, growth, metabolism, ...

In-Plane Behaviour of a Reinforcement Concrete Frame with a Dry Stack Masonry Panel

PubMed Central

Lin, Kun; Totoev, Yuri Zarevich; Liu, Hongjun; Guo, Tianyou

2016-01-01

In order to improve the energy dissipation of the masonry infilled frame structure while decreasing the stiffening and strengthening effects of the infill panels, a new dry stacked panel (DSP) semi-interlocking masonry (SIM) infill panel has been developed. In this paper, the material properties of DSP and a traditional unreinforced masonry (URM) panel have been evaluated experimentally. A series of cyclic tests were performed to investigate the cyclic behaviour of the reinforcement concrete (RC) frame with different infill panels. The failure modes, damage evolution, hysteretic behaviour, stiffness degradation and energy dissipation were compared and analysed. We concluded that DSP is capable of significantly improving the seismic energy dissipation due to its hysteretic behaviour when the frame is in elastic stage without increasing the stiffness of the frame. Therefore, DSP or SIM panels can be considered as frictional dampers. Based on the experimental results, the influence of DSP was examined. Using the parallel model, the hysteretic loops of DSP subjected to different load cases were achieved. The typical full hysteretic loop for DSP could be divided into three distinct stages of behaviour: packing stage, constant friction stage and equivalent strut stage. The connection between the panel and the frame had a great effect on the transferring of different mechanical stages. The constant friction stage was verified to provide substantial energy dissipation and benefits to the ductility of the structure, which, therefore, is suggested to be prolonged in reality. PMID:28787906

Is solvent/detergent plasma better than standard fresh-frozen plasma? A systematic review and an expert consensus document

PubMed Central

Marietta, Marco; Franchini, Massimo; Bindi, M. Lucia; Picardi, Francesco; Ruggeri, Matteo; De Silvestro, Giustina

2016-01-01

Background Only a few studies have compared solvent/detergent plasma (SD-plasma) to standard fresh-frozen plasma (FFP) in terms of efficacy and safety. Materials and methods A systematic review was performed in order to develop a consensus document on the use of SD-plasma. Moreover, a pharmacoeconomic study was performed in order to assess whether the use of SD-plasma can be cost-effective with respect to the use of FFP. A multidisciplinary panel used the systematic review and the GRADE methodology to develop evidence-based recommendations on this topic. Results Based on moderate to very low quality evidence, the panel developed the following consensus statements: (i) the panel suggested that SD-plasma is safer than FFP; (ii) the panel could not express for or against a greater efficacy of SD-plasma as compared to FFP; (iii) the panel suggested that in patients undergoing liver transplantation SD-plasma can be preferred over FFP; (iv) the panel suggested that SD-plasma can be preferred over FFP in patients with thrombotic thrombocytopenic purpura undergoing plasma-exchange procedures; (v) the panel could not recommend for or against preferring SD-plasma over FFP in critical care patients; and (vi) the panel suggested that the use of SD-plasma can be cost-effective with respect to the use of FFP. Discussion Data from additional randomised studies are needed to establish more definitive guidelines on the use of SD-plasma. PMID:27136429

In-Plane Behaviour of a Reinforcement Concrete Frame with a Dry Stack Masonry Panel.

PubMed

Lin, Kun; Totoev, Yuri Zarevich; Liu, Hongjun; Guo, Tianyou

2016-02-11

In order to improve the energy dissipation of the masonry infilled frame structure while decreasing the stiffening and strengthening effects of the infill panels, a new dry stacked panel (DSP) semi-interlocking masonry (SIM) infill panel has been developed. In this paper, the material properties of DSP and a traditional unreinforced masonry (URM) panel have been evaluated experimentally. A series of cyclic tests were performed to investigate the cyclic behaviour of the reinforcement concrete (RC) frame with different infill panels. The failure modes, damage evolution, hysteretic behaviour, stiffness degradation and energy dissipation were compared and analysed. We concluded that DSP is capable of significantly improving the seismic energy dissipation due to its hysteretic behaviour when the frame is in elastic stage without increasing the stiffness of the frame. Therefore, DSP or SIM panels can be considered as frictional dampers. Based on the experimental results, the influence of DSP was examined. Using the parallel model, the hysteretic loops of DSP subjected to different load cases were achieved. The typical full hysteretic loop for DSP could be divided into three distinct stages of behaviour: packing stage, constant friction stage and equivalent strut stage. The connection between the panel and the frame had a great effect on the transferring of different mechanical stages. The constant friction stage was verified to provide substantial energy dissipation and benefits to the ductility of the structure, which, therefore, is suggested to be prolonged in reality.

The Efficacy of a Viscoelastic Foam Overlay on Prevention of Pressure Injury in Acutely Ill Patients: A Prospective Randomized Controlled Trial.

PubMed

Park, Kyung Hee; Park, Joohee

The purpose of this study was to compare a viscoelastic foam overlay (VEFO) to a standard hospital mattress for pressure injury (PI) prevention. We also compared interface pressures (IPs) of the VEFO to our facility's standard hospital mattress. Prospective, randomized controlled trial. Data analysis was based on 110 participants (55 in each group) who were 19 years or older, had a Braden Scale for Pressure Sore Risk score of 16 or less, and were cared for on a neurology, oncology, or pulmonology inpatient care unit. The research setting was the Samsung Medical Center in Seoul, South Korea. Participants were divided into 2 groups: the experimental group were based on a VEFO on top of the standard hospital mattress used in our facility. Participants in the control group were placed on a standard hospital mattress with/without air overlay. All patients were given standard nursing care for prevention of PI. Skin assessments were completed daily over a period of 2 weeks. In addition, we compared IPs of the standard hospital mattress and the VEFO in participants randomly allocated to the intervention group. Interface pressure was measured over the sacral/coccygeal area with subjects in the supine position. Pressures were measured immediately before and immediately following placement of the VEFO and just before data collection began. Data were collected between October 2013 and November 2014. Pressure injury incidence was compared between groups using the χ test, and IPs were compared using the paired t test. Pressure injury development was determined using the staging system described in guidelines from the National Pressure Ulcer Advisory Panel, European Pressure Ulcer Advisory Panel, and Pan Pacific Pressure Injury Alliance in 2014. Interface pressure was measured using a device manufactured for this purpose. The incidence of PI development was significantly lower in subjects assigned to the experimental group as compared to those in the control group (3.6%-27.3% over the 2-week data collection period; P = .001). The maximum IP was significantly lower on the VEFO with standard hospital mattress than on the standard hospital mattress (paired t = 8.87, P < .001). Patients managed with a VEFO had a significantly lower incidence of PI than those managed with a standard hospital mattress. Additional research is needed to further characterize the efficacy of the VEFO, its effect on PI healing, and its effect of PI prevention in high-risk populations such as critically ill patients.

The implementation of a community-based aerobic walking program for mild to moderate knee osteoarthritis (OA): a knowledge translation (KT) randomized controlled trial (RCT): Part I: The Uptake of the Ottawa Panel clinical practice guidelines (CPGs)

PubMed Central

2012-01-01

Background The implementation of evidence based clinical practice guidelines on self-management interventions to patients with chronic diseases is a complex process. A multifaceted strategy may offer an effective knowledge translation (KT) intervention to promote knowledge uptake and improve adherence in an effective walking program based on the Ottawa Panel Evidence Based Clinical Practice Guidelines among individuals with moderate osteoarthritis (OA). Methods A single-blind, randomized control trial was conducted. Patients with mild to moderate (OA) of the knee (n=222) were randomized to one of three KT groups: 1) Walking and Behavioural intervention (WB) (18 males, 57 females) which included the supervised community-based aerobic walking program combined with a behavioural intervention and an educational pamphlet on the benefits of walking for OA; 2) Walking intervention (W) (24 males, 57 females) wherein participants only received the supervised community-based aerobic walking program intervention and the educational pamphlet; 3) Self-directed control (C) (32 males, 52 females) wherein participants only received the educational pamphlet. One-way analyses of variance were used to test for differences in quality of life, adherence, confidence, and clinical outcomes among the study groups at each 3 month assessment during the 12-month intervention period and 6-month follow-up period. Results Short-term program adherence was greater in WB compared to C (p<0.012) after 3 months. No statistical significance (p> 0.05) was observed for long-term adherence (6 to 12 months), and total adherence between the three groups. The three knowledge translation strategies demonstrated equivalent long-term results for the implementation of a walking program for older individuals with moderate OA. Lower dropout rates as well as higher retention rates were observed for WB at 12 and 18 months. Conclusion The additional knowledge translation behavioural component facilitated the implementation of clinical practice guidelines on walking over a short-term period. More studies are needed to improve the long-term walking adherence or longer guidelines uptake on walking among participants with OA. Particular attention should be taken into account related to patient’s characteristic and preference. OA can be managed through the implementation of a walking program based on clinical practice guidelines in existing community-based walking clubs as well as at home with the minimal support of an exercise therapist or a trained volunteer. Trial Registration Current Controlled Trials IRSCTNO9193542 PMID:23061875

Alcohol and liver cirrhosis mortality in the United States: comparison of methods for the analyses of time-series panel data models.

PubMed

Ye, Yu; Kerr, William C

2011-01-01

To explore various model specifications in estimating relationships between liver cirrhosis mortality rates and per capita alcohol consumption in aggregate-level cross-section time-series data. Using a series of liver cirrhosis mortality rates from 1950 to 2002 for 47 U.S. states, the effects of alcohol consumption were estimated from pooled autoregressive integrated moving average (ARIMA) models and 4 types of panel data models: generalized estimating equation, generalized least square, fixed effect, and multilevel models. Various specifications of error term structure under each type of model were also examined. Different approaches controlling for time trends and for using concurrent or accumulated consumption as predictors were also evaluated. When cirrhosis mortality was predicted by total alcohol, highly consistent estimates were found between ARIMA and panel data analyses, with an average overall effect of 0.07 to 0.09. Less consistent estimates were derived using spirits, beer, and wine consumption as predictors. When multiple geographic time series are combined as panel data, none of existent models could accommodate all sources of heterogeneity such that any type of panel model must employ some form of generalization. Different types of panel data models should thus be estimated to examine the robustness of findings. We also suggest cautious interpretation when beverage-specific volumes are used as predictors. Copyright © 2010 by the Research Society on Alcoholism.

Variation in the sustained effects of the communities that care prevention system on adolescent smoking, delinquency, and violence.

PubMed

Oesterle, Sabrina; Hawkins, J David; Fagan, Abigail A; Abbott, Robert D; Catalano, Richard F

2014-04-01

Communities That Care (CTC) is a universal, science-based community prevention system designed to reduce risk, enhance protection, and prevent adolescent health and behavior problems community wide. CTC has been found to have sustained effects on cigarette use and delinquent and violent behaviors in grade 10 in a panel of 4,407 students followed from fifth grade in a community randomized trial. It is important to test variation in the effects of this prevention system designed to be universal to understand for whom it is most effective and whether it fails to produce change or leads to iatrogenic effects for certain categories of individuals. The present study examined variation in the sustained effects of CTC on tenth-grade cigarette use and delinquent and violent behaviors. Interaction analyses suggest that the effect of CTC did not differ between those who had high levels of community-targeted risk factors at baseline or had already engaged in substance use, delinquency, or violence at baseline versus those who had not. Although CTC reduced the prevalence of both girls' and boys' problem behaviors, the effect on delinquency was marginally (p = 0.08) larger for boys than for girls.

Universality properties of school-based preventive intervention targeted at cannabis use.

PubMed

Miovský, Michal; Voňková, Hana; Gabrhelík, Roman; Šťastná, Lenka

2015-02-01

This study aims to examine the effect of school-based preventive intervention on cannabis use in Czech adolescents with different levels of risk factors and provide evidence of its universality. A randomized controlled prevention trial with six waves was conducted over a period of 33 months. We used a two-level logistic random-intercept model for panel data; we first looked at the statistical significance of the effect of the intervention on cannabis use, controlling for the characteristics of the children and time dummies. Then we analyzed the effects of the interactions between the intervention and the characteristics of the children on cannabis use and related it to the definition of universal preventive interventions. The setting for the study was in basic schools in the Czech Republic in the years 2007-2010. A total of 1,874 sixth-graders (mean age 11.82 years) who completed the baseline testing. According to our results, the prevention intervention was effective. We found all the selected characteristics of the children to be relevant in relation to cannabis use, except their relationships with their friends. We showed empirically that the intervention is universal in two dimensions for the selected characteristics of the children. First, all adolescents who undergo the intervention are expected to benefit. Second, with respect to the effect of the intervention on cannabis use, the total level of individual risk of cannabis use is superior to the composition of the risk factors in the individual risk profile. We present indicative evidence that the drug prevention intervention may be considered a true universal preventive intervention.

Hypersonic panel flutter in a rarefied atmosphere

NASA Technical Reports Server (NTRS)

Resende, Hugo B.

1993-01-01

Panel flutter is a form of dynamic aeroelastic instability resulting from the interaction between motion of an aircraft structural panel and the aerodynamic loads exerted on that panel by air flowing past one of the faces. It differs from lifting surface flutter in the sense that it is not usually catastrophic, the panel's motion being limited by nonlinear membrane stresses produced by the transverse displacement. Above some critical airflow condition, the linear instability grows to a limit cycle . The present investigation studies panel flutter in an aerodynamic regime known as 'free molecule flow', wherein intermolecular collisions can be neglected and loads are caused by interactions between individual molecules and the bounding surface. After collision with the panel, molecules may be reflected specularly or reemitted in diffuse fashion. Two parameters characterize this process: the 'momentum accommodation coefficient', which is the fraction of the specularly reflected molecules; and the ratio between the panel temperature and that of the free airstream. This model is relevant to the case of hypersonic flight vehicles traveling at very high altitudes and especially for panels oriented parallel to the airstream or in the vehicle's lee. Under these conditions the aerodynamic shear stress turns out to be considerably larger than the surface pressures, and shear effects must be included in the model. This is accomplished by means of distributed longitudinal and bending loads. The former can cause the panel to buckle. In the example of a simply-supported panel, it turns out that the second mode of free vibration tends to dominate the flutter solution, which is carried out by a Galerkin analysis. Several parametric studies are presented. They include the effects of (1) temperature ratio; (2) momentum accommodation coefficient; (3) spring parameters, which are associated with how the panel is connected to adjacent structures; (4) a parameter which relates compressive end load to its value which would cause classical column buckling; (5) a parameter proportional to the pressure differential between the front and back faces; and (6) initial curvature. The research is completed by an investigation into the possibility of accounting for molecular collisions, which proves to be infeasible given the speeds of current mainframe supercomputers.

Political science. When contact changes minds: an experiment on transmission of support for gay equality.

PubMed

LaCour, Michael J; Green, Donald P

2014-12-12

Can a single conversation change minds on divisive social issues, such as same-sex marriage? A randomized placebo-controlled trial assessed whether gay (n = 22) or straight (n = 19) messengers were effective at encouraging voters (n = 972) to support same-sex marriage and whether attitude change persisted and spread to others in voters' social networks. The results, measured by an unrelated panel survey, show that both gay and straight canvassers produced large effects initially, but only gay canvassers' effects persisted in 3-week, 6-week, and 9-month follow-ups. We also find strong evidence of within-household transmission of opinion change, but only in the wake of conversations with gay canvassers. Contact with gay canvassers further caused substantial change in the ratings of gay men and lesbians more generally. These large, persistent, and contagious effects were confirmed by a follow-up experiment. Contact with minorities coupled with discussion of issues pertinent to them is capable of producing a cascade of opinion change. Copyright © 2014, American Association for the Advancement of Science.

The significance of the source of zinc and its anti-VSC effect.

PubMed

Rölla, G; Jonski, G; Young, A

2002-06-01

The anti-VSC (volatile sulphur compounds) effect of zinc is known to be associated with free zinc ions. To examine whether zinc salts with low stability constants were more suitable as sources of zinc in zinc lozenges than zinc salts with high stability constants. The former provide free zinc ions upon dissolution in water, whereas the latter provide few such ions. Identical lozenges were produced which contained either zinc acetate, zinc gluconate (low stability constants), zinc citrate or amino-acid chelated zinc (extremely high stability constants). All the lozenges contained 0.1 per cent of zinc. A test panel of 10 volunteers used the different lozenges randomly. VSC were measured by GC. The lozenge with the highest stability constant was as effective as those with very low stability constants. The anti-VSC effect was thus not related to this constant. These findings may be explained by the possibility that alternative ligands with stronger affinity for zinc than the original ligands in the lozenges may be present in the oral cavity. An in vitro experiment indicated that the sulphide ion (S2-) may be such a ligand.

Aerothermal Test of Thermal Protection Systems for X-33 Reusable Launch Vehicle

NASA Technical Reports Server (NTRS)

Sawyer, James Wayne; Hodge, Jefferson; Moore, Brad; Snyder, Kevin

1999-01-01

An array of metallic Thermal Protection System (TPS) panels developed for the windward surface of the X-33 vehicle was tested in the 8-Foot High Temperature Tunnel at the NASA Langley Research Center. These tests were the first aerothermal tests of an X-33 TPS array and the test results will be used to validate the TPS for the X-33 flight program. Specifically, the tests evaluated the structural and thermal performance of the TPS, the effectiveness of the high temperature seals between adjacent panels and the durability of the TPS under realistic aerothermal flight conditions. The effect of varying panel-to-panel step heights, intentional damage to the seals between adjacent panels, and the use of secondary seals were also investigated during the test program. The metallic TPS developed for the windward surface of the X-33, the blanket TPS developed to protect the leeward surfaces of the X-33, and the test program in the 8-Foot High Temperature Tunnel are presented and discussed.

An Investigation on Low Velocity Impact Response of Multilayer Sandwich Composite Structures

PubMed Central

Jedari Salami, S.; Sadighi, M.; Shakeri, M.; Moeinfar, M.

2013-01-01

The effects of adding an extra layer within a sandwich panel and two different core types in top and bottom cores on low velocity impact loadings are studied experimentally in this paper. The panel includes polymer composite laminated sheets for faces and the internal laminated sheet called extra layer sheet, and two types of crushable foams are selected as the core material. Low velocity impact tests were carried out by drop hammer testing machine to the clamped multilayer sandwich panels with expanded polypropylene (EPP) and polyurethane rigid (PUR) in the top and bottom cores. Local displacement of the top core, contact force and deflection of the sandwich panel were obtained for different locations of the internal sheet; meanwhile the EPP and PUR were used in the top and bottom cores alternatively. It was found that the core material type has made significant role in improving the sandwich panel's behavior compared with the effect of extra layer location. PMID:24453804

Temperature and initial curvature effects in low-density panel flutter

NASA Technical Reports Server (NTRS)

Resende, Hugo B.

1992-01-01

The panel flutter phenomenon is studied assuming free-molecule flow. This kind of analysis is relevant in the case of hypersonic flight vehicles traveling at high altitudes, especially in the leeward portion of the vehicle. In these conditions the aerodynamic shear can be expected to be considerably larger than the pressure at a given point, so that the effects of such a loading are incorporated into the structural model. Both the pressure and shear loadings are functions of the panel temperature, which can lead to great variations on the location of the stability boundaries for parametric studies. Different locations can, however, be 'collapsed' onto one another by using as ordinate an appropriately normalized dynamic pressure parameter. This procedure works better for higher values of the panel temperature for a fixed undisturbed flow temperature. Finally, the behavior of the system is studied when the panel has some initial curvature. This leads to the conclusion that it may be unrealistic to try to distinguish between a parabolic or sinusoidal initial shape.

Sound transmission through a double-panel construction lined with poroelastic material in the presence of mean flow

NASA Astrophysics Data System (ADS)

Zhou, Jie; Bhaskar, Atul; Zhang, Xin

2013-08-01

This paper investigates the sound transmission characteristics through a system of double-panel lined with poroelastic material in the core. The panels are surrounded by external and internal fluid media where a uniform external mean flow exists on one side. Biot's theory is used to model the porous material. Three types of constructions—bonded-bonded, bonded-unbonded and unbonded-unbonded—are considered. The effect of Mach number of the external flow on the sound transmission over a wide frequency range in a diffuse sound field is examined. External mean flow is shown to give a modest increase in transmission loss at low frequency, but a significant increase at high frequency. It is brought out that calculations based on static air on the incidence side provide a conservative estimate of sound transmission through the sandwich structure. The acoustic performance of the sandwich panel for different configurations is presented. The effect of curvature of the panel is also brought out by using shallow shell theory.

Nonlinear panel flutter in a rarefied atmosphere - Aerodynamic shear stress effects

NASA Technical Reports Server (NTRS)

Resende, Hugo B.

1991-01-01

The panel flutter phenomenon is studied assuming free-molecule flow. This kind of analysis is relevant in the case of hypersonic flight vehicles traveling at high altitudes, especially in the leeward portion of the vehicle. In these conditions the aerodynamic shear can be expected to be considerably larger than the pressure at a given point, so that the effects of such a loading are incorporated into the structural model. This is accomplished by introducing distributed longitudinal and bending moment loads. The former can lead to buckling of the panel, with the second mode in the case of a simply-supported panel playing a important role, and becoming the dominant mode in the solution. The presence of equivalent springs in the longitudinal direction at the panel's ends also becomes of relative importance, even for the evaluation of the linear flutter parameter. Finally, the behavior of the system is studied in the presence of applied compressive forces, that is, classical buckling.

Genotyping of 75 SNPs using arrays for individual identification in five population groups.

PubMed

Hwa, Hsiao-Lin; Wu, Lawrence Shih Hsin; Lin, Chun-Yen; Huang, Tsun-Ying; Yin, Hsiang-I; Tseng, Li-Hui; Lee, James Chun-I

2016-01-01

Single nucleotide polymorphism (SNP) typing offers promise to forensic genetics. Various strategies and panels for analyzing SNP markers for individual identification have been published. However, the best panels with fewer identity SNPs for all major population groups are still under discussion. This study aimed to find more autosomal SNPs with high heterozygosity for individual identification among Asian populations. Ninety-six autosomal SNPs of 502 DNA samples from unrelated individuals of five population groups (208 Taiwanese Han, 83 Filipinos, 62 Thais, 69 Indonesians, and 80 individuals with European, Near Eastern, or South Asian ancestry) were analyzed using arrays in an initial screening, and 75 SNPs (group A, 46 newly selected SNPs; groups B, 29 SNPs based on a previous SNP panel) were selected for further statistical analyses. Some SNPs with high heterozygosity from Asian populations were identified. The combined random match probability of the best 40 and 45 SNPs was between 3.16 × 10(-17) and 7.75 × 10(-17) and between 2.33 × 10(-19) and 7.00 × 10(-19), respectively, in all five populations. These loci offer comparable power to short tandem repeats (STRs) for routine forensic profiling. In this study, we demonstrated the population genetic characteristics and forensic parameters of 75 SNPs with high heterozygosity from five population groups. This SNPs panel can provide valuable genotypic information and can be helpful in forensic casework for individual identification among these populations.

Radiologist Agreement for Mammographic Recall by Case Difficulty and Finding Type

PubMed Central

Onega, Tracy; Smith, Megan; Miglioretti, Diana L.; Carney, Patricia A.; Geller, Berta; Kerlikowske, Karla; Buist, Diana SM; Rosenberg, Robert D.; Smith, Robert; Sickles, Edward A.; Haneuse, Sebastien; Anderson, Melissa L.; Yankaskas, Bonnie

2012-01-01

INTRODUCTIONS To assess agreement of mammography interpretations by community radiologists with consensus interpretations of an expert radiology panel, to inform approaches that improve mammography performance. METHODS From six mammography registries, 119 community-based radiologists were recruited to assess one of four randomly assigned test sets of 109 screening mammograms with comparison studies for no recall or recall, giving the most significant finding type [mass, calcifications, asymmetric density or architectural distortion] and location. The mean proportion of agreement with an expert radiology panel was calculated by cancer status, finding type, and difficulty level of identifying the finding at the woman, breast, and lesion level. We also examined concordance in finding type between study radiologists and the expert panel. For each finding type, we determined the proportion of unnecessary recalls, defined as study radiologist recalls that were not expert panel recalls. RESULTS Recall agreement was 100% for masses and for exams with obvious findings in both cancer and non-cancer cases. Among cancer cases, recall agreement was lower for lesions that were subtle (50%) or asymmetric (60%). Subtle non-cancer findings and benign calcifications showed 33% agreement for recall. Agreement for finding responsible for recall was low, especially for architectural distortions (43%) and asymmetric densities (40%). Most unnecessary recalls (51%) were asymmetric densities. CONCLUSION Agreement in mammography interpretation was low for asymmetric densities and architectural distortions. Training focused on these interpretations could improve mammography accuracy and reduce unnecessary recalls. PMID:23122345

Reorganization increases long-term sickness absence at all levels of hospital staff: panel data analysis of employees of Norwegian public hospitals.

PubMed

Ingelsrud, Mari H

2014-09-19

The Norwegian specialist health service has undergone many processes of reorganization during the last three decades. Changes are mainly initiated to increase the efficiency and quality of health care serving an ageing population under the condition of a diminishing labour supply. The aim of this study is to investigate the effects of reorganization on long-term sickness absence among different levels of hospital staff. The study draws on panel data on employees of Norwegian public hospitals in 2005 and 2007 (N = 106,715). National register data on individual employees' days of medically certified long-term (>16 days) sickness absence were linked with survey measures of actual reorganization executed at each hospital in each year. The surveys, answered by hospital administration staff, measured five types of reorganization: merging units, splitting up units, creating new units, shutting down units and reallocation of employees. The variation in sickness absence days was analysed using random and fixed effects Poisson regression with level of reorganization as the main explanatory variable. The fixed effects analysis shows that increasing the degree of organizational change at a hospital from a low to a moderate or high degree leads to an increase in the number of days of long-term sickness absence of respectively 9% (95% CI: 1.03-1.15) and 8% (95% CI: 1.02-1.15). There are few significant differences between employees in different education categories. Only physicians have a significantly higher relative increase in days of long-term sickness absence than the control group with lower tertiary education. Increased long-term sickness absence is a risk following reorganization. This risk affects all levels of hospital staff.

Effects of High School Exit Exams on Dropout Rates: Summary of a Panel Discussion.

ERIC Educational Resources Information Center

Chudowsky, Naomi; Gayler, Keith

This paper summarizes a panel discussion that addressed exit-exam policies and dropout issues. It presents the panel members' conclusions about existing research and their recommendations on what kinds of further work are needed. Research on how exit exams affect dropout rates is limited and inconclusive, so policies continue to be made in the…

Basic metabolic panel

MedlinePlus

SMAC7; Sequential multi-channel analysis with computer-7; SMA7; Metabolic panel 7; CHEM-7 ... breathing problems, diabetes or diabetes-related complications, and medicine side effects. Talk to your provider about the ...

Sound Transmission Loss Through a Corrugated-Core Sandwich Panel with Integrated Acoustic Resonators

NASA Technical Reports Server (NTRS)

Schiller, Noah H.; Allen, Albert R.; Zalewski, Bart F; Beck, Benjamin S.

2014-01-01

The goal of this study is to better understand the effect of structurally integrated resonators on the transmission loss of a sandwich panel. The sandwich panel has facesheets over a corrugated core, which creates long aligned chambers that run parallel to the facesheets. When ports are introduced through the facesheet, the long chambers within the core can be used as low-frequency acoustic resonators. By integrating the resonators within the structure they contribute to the static load bearing capability of the panel while also attenuating noise. An analytical model of a panel with embedded resonators is derived and compared with numerical simulations. Predictions show that acoustic resonators can significantly improve the transmission loss of the sandwich panel around the natural frequency of the resonators. In one configuration with 0.813 m long internal chambers, the diffuse field transmission loss is improved by more than 22 dB around 104 Hz. The benefit is achieved with no added mass or volume relative to the baseline structure. The embedded resonators are effective because they radiate sound out-of-phase with the structure. This results in destructive interference, which leads to less transmitted sound power.

Prediction of break-out sound from a rectangular cavity via an elastically mounted panel.

PubMed

Wang, Gang; Li, Wen L; Du, Jingtao; Li, Wanyou

2016-02-01

The break-out sound from a cavity via an elastically mounted panel is predicted in this paper. The vibroacoustic system model is derived based on the so-called spectro-geometric method in which the solution over each sub-domain is invariably expressed as a modified Fourier series expansion. Unlike the traditional modal superposition methods, the continuity of the normal velocities is faithfully enforced on the interfaces between the flexible panel and the (interior and exterior) acoustic media. A fully coupled vibro-acoustic system is obtained by taking into account the strong coupling between the vibration of the elastic panel and the sound fields on the both sides. The typical time-consuming calculations of quadruple integrals encountered in determining the sound power radiation from a panel has been effectively avoided by reducing them, via discrete cosine transform, into a number of single integrals which are subsequently calculated analytically in a closed form. Several numerical examples are presented to validate the system model, understand the effects on the sound transmissions of panel mounting conditions, and demonstrate the dependence on the size of source room of the "measured" transmission loss.

Study of noise reduction characteristics of composite fiber-reinforced panels, interior panel configurations, and the application of the tuned damper concept

NASA Technical Reports Server (NTRS)

Lameris, J.; Stevenson, S.; Streeter, B.

1982-01-01

The application of fiber reinforced composite materials, such as graphite epoxy and Kevlar, for secondary or primary structures developing in the commercial airplane industry was investigated. A composite panel program was initiated to study the effects of some of the parameters that affect noise reduction of these panels. The fiber materials and the ply orientation were chosen to be variables in the test program. It was found that increasing the damping characteristics of a structural panel will reduce the vibration amplitudes at resonant frequencies with attendant reductions in sound reduction. Test results for a dynamic absorber, a tuned damper, are presented and evaluated.

Design and analysis of grid stiffened fuselage panel with curved stiffeners

NASA Astrophysics Data System (ADS)

Hemanth, Bharath; Babu, N. C. Mahendra; Shivakumar, H. G.; Srikari, S.

2018-04-01

Designing and analyzing grid stiffened panel to understand the effect of stiffeners on stiffness of the panel is crucial in designing grid stiffened cylinder for fuselage application. Traditionally only straight stiffeners were used due to limited manufacturing capabilities and in recent years GSS with curved stiffeners have become a reality. The present work is on flat grid stiffened panel and the focus is to realize the change in stiffness by converting straight stiffeners in an isogrid panel to curved stiffeners. An isogrid stiffened panel is identified from literature for which experimental results were available and was considered for replacing straight stiffeners with curved stiffeners. Defining and designing the curve for curved stiffeners which can be used to replace straight stiffeners in isogrid pattern is crucial. FE model of the grid stiffened fuselage panel with isogrid pattern identified from the literature for which experimental data was available was developed and evaluated for stiffness. For the same panel, curved grid pattern to enhance stiffness of the panel was designed following existing design procedure. FE model of the grid stiffened fuselage panel with designed curved stiffeners was developed and evaluated for stiffness. It is established that the stiffness of panel can be increased by minimum of 2.82% to maximum of 11.93% by using curved stiffeners of particular curvature as a replacement for straight stiffeners in isogrid pattern with a slight mass penalty.

Heat Transfer in Adhesively Bonded Honeycomb Core Panels

NASA Technical Reports Server (NTRS)

Daryabeigi, Kamran

2001-01-01

The Swann and Pittman semi-empirical relationship has been used as a standard in aerospace industry to predict the effective thermal conductivity of honeycomb core panels. Recent measurements of the effective thermal conductivity of an adhesively bonded titanium honeycomb core panel using three different techniques, two steady-state and one transient radiant step heating method, at four laboratories varied significantly from each other and from the Swann and Pittman predictions. Average differences between the measurements and the predictions varied between 17 and 61% in the temperature range of 300 to 500 K. In order to determine the correct values of the effective thermal conductivity and determine which set of the measurements or predictions were most accurate, the combined radiation and conduction heat transfer in the honeycomb core panel was modeled using a finite volume numerical formulation. The transient radiant step heating measurements provided the best agreement with the numerical results. It was found that a modification of the Swann and Pittman semi-empirical relationship which incorporated the facesheets and adhesive layers in the thermal model provided satisfactory results. Finally, a parametric study was conducted to investigate the influence of adhesive thickness and thermal conductivity on the overall heat transfer through the panel.

Scaling the Non-linear Impact Response of Flat and Curved Composite Panels

NASA Technical Reports Server (NTRS)

Ambur, Damodar R.; Chunchu, Prasad B.; Rose, Cheryl A.; Feraboli, Paolo; Jackson, Wade C.

2005-01-01

The application of scaling laws to thin flat and curved composite panels exhibiting nonlinear response when subjected to low-velocity transverse impact is investigated. Previous research has shown that the elastic impact response of structural configurations exhibiting geometrically linear response can be effectively scaled. In the present paper, a preliminary experimental study is presented to assess the applicability of the scaling laws to structural configurations exhibiting geometrically nonlinear deformations. The effect of damage on the scalability of the structural response characteristics, and the effect of scale on damage development are also investigated. Damage is evaluated using conventional methods including C-scan, specimen de-plying and visual inspection of the impacted panels. Coefficient of restitution and normalized contact duration are also used to assess the extent of damage. The results confirm the validity of the scaling parameters for elastic impacts. However, for the panels considered in the study, the extent and manifestation of damage do not scale according to the scaling laws. Furthermore, the results indicate that even though the damage does not scale, the overall panel response characteristics, as indicated by contact force profiles, do scale for some levels of damage.

Hot-spot investigations of utility scale panel configurations

NASA Technical Reports Server (NTRS)

Arnett, J. C.; Dally, R. B.; Rumburg, J. P.

1984-01-01

The causes of array faults and efforts to mitigate their effects are examined. Research is concentrated on the panel for the 900 kw second phase of the Sacramento Municipal Utility District (SMUD) project. The panel is designed for hot spot tolerance without comprising efficiency under normal operating conditions. Series/paralleling internal to each module improves tolerance in the power quadrant to cell short or open circuits. Analtyical methods are developed for predicting worst case shade patterns and calculating the resultant cell temperature. Experiments conducted on a prototype panel support the analytical calculations.

Active control of turbulent boundary layer-induced sound transmission through the cavity-backed double panels

NASA Astrophysics Data System (ADS)

Caiazzo, A.; Alujević, N.; Pluymers, B.; Desmet, W.

2018-05-01

This paper presents a theoretical study of active control of turbulent boundary layer (TBL) induced sound transmission through the cavity-backed double panels. The aerodynamic model used is based on the Corcos wall pressure distribution. The structural-acoustic model encompasses a source panel (skin panel), coupled through an acoustic cavity to the radiating panel (trim panel). The radiating panel is backed by a larger acoustic enclosure (the back cavity). A feedback control unit is located inside the acoustic cavity between the two panels. It consists of a control force actuator and a sensor mounted at the actuator footprint on the radiating panel. The control actuator can react off the source panel. It is driven by an amplified velocity signal measured by the sensor. A fully coupled analytical structural-acoustic model is developed to study the effects of the active control on the sound transmission into the back cavity. The stability and performance of the active control system are firstly studied on a reduced order model. In the reduced order model only two fundamental modes of the fully coupled system are assumed. Secondly, a full order model is considered with a number of modes large enough to yield accurate simulation results up to 1000 Hz. It is shown that convincing reductions of the TBL-induced vibrations of the radiating panel and the sound pressure inside the back cavity can be expected. The reductions are more pronounced for a certain class of systems, which is characterised by the fundamental natural frequency of the skin panel larger than the fundamental natural frequency of the trim panel.

Effective medical treatment of opiate addiction. National Consensus Development Panel on Effective Medical Treatment of Opiate Addiction.

PubMed

1998-12-09

To provide clinicians, patients, and the general public with a responsible assessment of the effective approaches to treat opiate dependence. A nonfederal, nonadvocate, 12-member panel representing the fields of psychology, psychiatry, behavioral medicine, family medicine, drug abuse, epidemiology, and the public. In addition, 25 experts from these same fields presented data to the panel and a conference audience of 600. Presentations and discussions were divided into 3 phases over 2 1/2 days: (1) presentations by investigators working in the areas relevant to the consensus questions during a 2-day public session; (2) questions and statements from conference attendees during open discussion periods that are part of the public session; and (3) closed deliberations by the panel during the remainder of the second day and morning of a third day. The conference was organized and supported by the Office of Medical Applications of Research, National Institutes of Health. The literature was searched through MEDLINE and other National Library of Medicine and online databases from January 1994 through September 1997 and an extensive bibliography of 941 references was provided to the panel and the conference audience. Experts prepared abstracts for their presentations as speakers at the conference with relevant citations from the literature. Scientific evidence was given precedence over clinical anecdotal experience. The panel, answering predefined questions, developed its conclusions based on the scientific evidence presented in open forum and the scientific literature. The panel composed a draft statement that was read in its entirety and circulated to the experts and the audience for comment. Thereafter, the panel resolved conflicting recommendations and released a revised statement at the end of the conference. The panel finalized the revisions within a few weeks after the conference. The draft statement was made available on the World Wide Web immediately following its release at the conference and was updated with the panel's final revisions. Opiate dependence is a brain-related medical disorder that can be effectively treated with significant benefits for the patient and society, and society must make a commitment to offer effective treatment for opiate dependence to all who need it. All persons dependent on opiates should have access to methadone hydrochloride maintenance therapy under legal supervision, and the US Office of National Drug Control Policy and the US Department of Justice should take the necessary steps to implement this recommendation. There is a need for improved training for physicians and other health care professionals. Training to determine diagnosis and treatment of opiate dependence should also be improved in medical schools. The unnecessary regulations of methadone maintenance therapy and other long-acting opiate agonist treatment programs should be reduced, and coverage for these programs should be a required benefit in public and private insurance programs.

Performance power evaluation of DC fan cooling system for PV panel by using ANSYS CFX

NASA Astrophysics Data System (ADS)

Syafiqah, Z.; Amin, N. A. M.; Irwan, Y. M.; Irwanto, M.; Leow, W. Z.; Amelia, A. R.

2017-09-01

A research has been conducted to find the optimum combination for DC fan air cooling system of photovoltaic (PV) panel. During normal operation of PV panel, it is estimated that only 15 % of solar radiation is converted into electrical energy. Meanwhile, the rest of the solar radiation is converted into heat energy which affects the performance of the PV panel. Therefore, the aim of this research is to investigate the performance power evaluation of DC fan cooling system for PV panel by using ANSYS CFX. The effect of airflow configuration of DC fan has been investigated. This is to analyze whether the airflow circulation of DC fan cause a change towards the maximum temperature of PV panel. Besides, the impact of varying number of DC fans attached at the back of PV panel is evaluated. The result of airflow circulation of DC fan has been discussed. Meanwhile, with the increment number of DC fans, the PV panel temperature drops significantly. As a conclusion, the optimum number of DC fans is two with the combination of inlet airflow.

A study of the structural-acoustic response and interior noise levels of fuselage structures

NASA Technical Reports Server (NTRS)

Koval, L. R.

1978-01-01

Models of both flat and curved fuselage panels were tested for their sound transmission characteristics. The effect of external air flow on transmission loss was simulated in a subsonic wind-tunnel. By numerically evaluating the known equations for field-incidence transmission loss of single-walled panels in a computer program, a comparison of the theory with the test results was made. As a further extension to aircraft fuselage simulation, equations for the field-incidence transmission loss of a double-walled panel were derived. Flow is shown to provide a small increase in transmission loss for a flat panel. Curvature is shown to increase transmission loss for low frequencies, while also providing a sharp decrease in transmission loss at the ring frequency of the cylindrical panel. The field-incidence transmission loss of a double-walled panel was found to be approximately twice that for a single-walled panel, with the addition of dips in the transmission loss at the air gap resonances and at the critical frequency of the internal panel.

Labour Market Problems and Psychological Well-Being: A Panel Study of Canadian Youth in Transition from School to Work.

ERIC Educational Resources Information Center

Hartnagel, Timothy F.; Krahn, Harvey

1995-01-01

Four-year panel survey data were used to examine the effects of well-being on school-to-work transition of Canadian youth. Such labor market problems as unemployment and underemployment had small, significant negative effects on self-esteem, depression, and powerlessness for high school graduates but not college graduates. Effects of education…

Energy transmission through a double-wall curved stiffened panel using Green's theorem

NASA Astrophysics Data System (ADS)

Ghosh, Subha; Bhattacharya, Partha

2015-04-01

It is a common practice in aerospace and automobile industries to use double wall panels as fuselage skins or in window panels to improve acoustic insulation. However, the scientific community is yet to develop a reliable prediction method for a suitable vibro-acoustic model for sound transmission through a curved double-wall panel. In this quest, the present work tries to delve into the modeling of energy transmission through a double-wall curved panel. Subsequently the radiation of sound power into the free field from the curved panel in the low to mid frequency range is also studied. In the developed model to simulate a stiffened aircraft fuselage configuration, the outer wall is provided with longitudinal stiffeners. A modal expansion theory based on Green's theorem is implemented to model the energy transmission through an acoustically coupled double-wall curved panel. An elemental radiator approach is implemented to calculate the radiated energy from the curved surface in to the free field. The developed model is first validated with various numerical models available. It has been observed in the present study that the radius of curvature of the surface has a prominent effect on the behavior of radiated sound power into the free field. Effect of the thickness of the air gap between the two curved surfaces on the sound power radiation has also been noted.

Existing reporting guidelines for clinical trials are not completely relevant for implantable medical devices: a systematic review.

PubMed

Motte, Anne-France; Diallo, Stéphanie; van den Brink, Hélène; Châteauvieux, Constance; Serrano, Carole; Naud, Carole; Steelandt, Julie; Alsac, Jean-Marc; Aubry, Pierre; Cour, Florence; Pellerin, Olivier; Pineau, Judith; Prognon, Patrice; Borget, Isabelle; Bonan, Brigitte; Martelli, Nicolas

2017-11-01

The aim of this study was to determine relevant items for reporting clinical trials on implantable medical devices (IMDs) and to identify reporting guidelines which include these items. A panel of experts identified the most relevant items for evaluating IMDs from an initial list based on reference papers. We then conducted a systematic review of articles indexed in MEDLINE. We retrieved reporting guidelines from the EQUATOR network's library for health research reporting. Finally, we screened these reporting guidelines to find those using our set of reporting items. Seven relevant reporting items were selected that related to four topics: randomization, learning curve, surgical setting, and device information. A total of 348 reporting guidelines were identified, among which 26 met our inclusion criteria. However, none of the 26 reporting guidelines presented all seven items together. The most frequently reported item was timing of randomization (65%). On the contrary, device information and learning curve effects were poorly specified. To our knowledge, this study is the first to identify specific items related to IMDs in reporting guidelines for clinical trials. We have shown that no existing reporting guideline is totally suitable for these devices. Copyright © 2017 Elsevier Inc. All rights reserved.

A two dimensional interface element for coupling of independently modeled three dimensional finite element meshes and extensions to dynamic and non-linear regimes

NASA Technical Reports Server (NTRS)

Aminpour, Mohammad

1995-01-01

The work reported here pertains only to the first year of research for a three year proposal period. As a prelude to this two dimensional interface element, the one dimensional element was tested and errors were discovered in the code for built-up structures and curved interfaces. These errors were corrected and the benchmark Boeing composite crown panel was analyzed successfully. A study of various splines led to the conclusion that cubic B-splines best suit this interface element application. A least squares approach combined with cubic B-splines was constructed to make a smooth function from the noisy data obtained with random error in the coordinate data points of the Boeing crown panel analysis. Preliminary investigations for the formulation of discontinuous 2-D shell and 3-D solid elements were conducted.

Treatment of Malignant Pleural Mesothelioma: American Society of Clinical Oncology Clinical Practice Guideline.

PubMed

Kindler, Hedy L; Ismaila, Nofisat; Armato, Samuel G; Bueno, Raphael; Hesdorffer, Mary; Jahan, Thierry; Jones, Clyde Michael; Miettinen, Markku; Pass, Harvey; Rimner, Andreas; Rusch, Valerie; Sterman, Daniel; Thomas, Anish; Hassan, Raffit

2018-05-01

Purpose To provide evidence-based recommendations to practicing physicians and others on the management of malignant pleural mesothelioma. Methods ASCO convened an Expert Panel of medical oncology, thoracic surgery, radiation oncology, pulmonary, pathology, imaging, and advocacy experts to conduct a literature search, which included systematic reviews, meta-analyses, randomized controlled trials, and prospective and retrospective comparative observational studies published from 1990 through 2017. Outcomes of interest included survival, disease-free or recurrence-free survival, and quality of life. Expert Panel members used available evidence and informal consensus to develop evidence-based guideline recommendations. Results The literature search identified 222 relevant studies to inform the evidence base for this guideline. Recommendations Evidence-based recommendations were developed for diagnosis, staging, chemotherapy, surgical cytoreduction, radiation therapy, and multimodality therapy in patients with malignant pleural mesothelioma. Additional information is available at www.asco.org/thoracic-cancer-guidelines and www.asco.org/guidelineswiki .

Developing a Manualized Occupational Therapy Diabetes Management Intervention: Resilient, Empowered, Active Living With Diabetes.

PubMed

Pyatak, Elizabeth A; Carandang, Kristine; Davis, Shain

2015-07-01

This article reports on the development of a manualized occupational therapy intervention for diabetes management. An initial theoretical framework and core content areas for a Stage I intervention manual were developed based on an in-depth needs assessment and review of existing literature. After evaluation by a panel of experts and completion of a feasibility study, the intervention was revised into a Stage 2 manual in preparation for a randomized study evaluating the intervention's efficacy. In developing the initial manual, we delineated core theoretical principles to allow for flexible application and tailoring of the intervention's content areas. Expert panel feedback and feasibility study results led to changes to the intervention structure and content as we developed the Stage 2 manual. Through describing this process, we illustrate the dynamic evolution of intervention manuals, which undergo revisions due to both theoretical and practical considerations at each stage of the research-to-clinical practice pipeline.

Authoritarian Parenting and Asian Adolescent School Performance: Insights from the US and Taiwan

PubMed Central

Pong, Suet-ling; Johnston, Jamie; Chen, Vivien

2014-01-01

Our study re-examines the relationship between parenting and school performance among Asian students. We use two sources of data: wave I of the Adolescent Health Longitudinal Survey (Add Health), and waves I and II of the Taiwan Educational Panel Survey (TEPS). Analysis using Add Health reveals that the Asian-American/European-American difference in the parenting–school performance relationship is due largely to differential sample sizes. When we select a random sample of European-American students comparable to the sample size of Asian-American students, authoritarian parenting also shows no effect for European-American students. Furthermore, analysis of TEPS shows that authoritarian parenting is negatively associated with children's school achievement, while authoritative parenting is positively associated. This result for Taiwanese Chinese students is similar to previous results for European-American students in the US. PMID:24850978

Probabilistic Physics-Based Risk Tools Used to Analyze the International Space Station Electrical Power System Output

NASA Technical Reports Server (NTRS)

Patel, Bhogila M.; Hoge, Peter A.; Nagpal, Vinod K.; Hojnicki, Jeffrey S.; Rusick, Jeffrey J.

2004-01-01

This paper describes the methods employed to apply probabilistic modeling techniques to the International Space Station (ISS) power system. These techniques were used to quantify the probabilistic variation in the power output, also called the response variable, due to variations (uncertainties) associated with knowledge of the influencing factors called the random variables. These uncertainties can be due to unknown environmental conditions, variation in the performance of electrical power system components or sensor tolerances. Uncertainties in these variables, cause corresponding variations in the power output, but the magnitude of that effect varies with the ISS operating conditions, e.g. whether or not the solar panels are actively tracking the sun. Therefore, it is important to quantify the influence of these uncertainties on the power output for optimizing the power available for experiments.

Authoritarian Parenting and Asian Adolescent School Performance: Insights from the US and Taiwan.

PubMed

Pong, Suet-Ling; Johnston, Jamie; Chen, Vivien

2010-01-01

Our study re-examines the relationship between parenting and school performance among Asian students. We use two sources of data: wave I of the Adolescent Health Longitudinal Survey (Add Health), and waves I and II of the Taiwan Educational Panel Survey (TEPS). Analysis using Add Health reveals that the Asian-American/European-American difference in the parenting-school performance relationship is due largely to differential sample sizes. When we select a random sample of European-American students comparable to the sample size of Asian-American students, authoritarian parenting also shows no effect for European-American students. Furthermore, analysis of TEPS shows that authoritarian parenting is negatively associated with children's school achievement, while authoritative parenting is positively associated. This result for Taiwanese Chinese students is similar to previous results for European-American students in the US.

Palliative radiation therapy for bone metastases: Update of an ASTRO Evidence-Based Guideline.

PubMed

Lutz, Stephen; Balboni, Tracy; Jones, Joshua; Lo, Simon; Petit, Joshua; Rich, Shayna E; Wong, Rebecca; Hahn, Carol

The purpose is to provide an update the Bone Metastases Guideline published in 2011 based on evidence complemented by expert opinion. The update will discuss new high-quality literature for the 8 key questions from the original guideline and implications for practice. A systematic PubMed search from the last date included in the original Guideline yielded 414 relevant articles. Ultimately, 20 randomized controlled trials, 32 prospective nonrandomized studies, and 4 meta-analyses/pooled analyses were selected and abstracted into evidence tables. The authors synthesized the evidence and reached consensus on the included recommendations. Available literature continues to support pain relief equivalency between single and multiple fraction regimens for bone metastases. High-quality data confirm single fraction radiation therapy may be delivered to spine lesions with acceptable late toxicity. One prospective, randomized trial confirms both peripheral and spine-based painful metastases can be successfully and safely palliated with retreatment for recurrence pain with adherence to published dosing constraints. Advanced radiation therapy techniques such as stereotactic body radiation therapy lack high-quality data, leading the panel to favor its use on a clinical trial or when results will be collected in a registry. The panel's conclusion remains that surgery, radionuclides, bisphosphonates, and kyphoplasty/vertebroplasty do not obviate the need for external beam radiation therapy. Updated data analysis confirms that radiation therapy provides excellent palliation for painful bone metastases and that retreatment is safe and effective. Although adherence to evidence-based medicine is critical, thorough expert radiation oncology physician judgment and discretion regarding number of fractions and advanced techniques are also essential to optimize outcomes when considering the patient's overall health, life expectancy, comorbidities, tumor biology, anatomy, previous treatment including prior radiation at or near current site of treatment, tumor and normal tissue response history to local and systemic therapies, and other factors related to the patient, tumor characteristics, or treatment. Copyright © 2016 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.

American Brachytherapy Society consensus report for accelerated partial breast irradiation using interstitial multicatheter brachytherapy.

PubMed

Hepel, Jaroslaw T; Arthur, Douglas; Shaitelman, Simona; Polgár, Csaba; Todor, Dorin; Zoberi, Imran; Kamrava, Mitchell; Major, Tibor; Yashar, Catheryn; Wazer, David E

To develop a consensus report for the quality practice of accelerated partial breast irradiation (APBI) using interstitial multicatheter brachytherapy (IMB). The American Brachytherapy Society Board appointed an expert panel with clinical and research experience with breast brachytherapy to provide guidance for the current practice of IMB. This report is based on a comprehensive literature review with emphasis on randomized data and expertise of the panel. Randomized trials have demonstrated equivalent efficacy of APBI using IMB compared with whole breast irradiation for select patients with early-stage breast cancer. Several techniques for placement of interstitial catheters are described, and importance of three-dimensional planning with appropriate optimization is reviewed. Optimal target definition is outlined. Commonly used dosing schemas include 50 Gy delivered in pulses of 0.6-0.8 Gy/h using pulsed-dose-rate technique and 34 Gy in 10 fractions, 32 Gy in eight fractions, or 30 Gy in seven fractions using high-dose-rate technique. Potential toxicities and strategies for toxicity avoidance are described in detail. Dosimetric constraints include limiting whole breast volume that receives ≥50% of prescription dose to <60%, skin dose to ≤100% of prescription dose (≤60-70% preferred), chest wall dose to ≤125% of prescription dose, Dose Homogeneity Index to >0.75 (>0.85 preferred), V 150  < 45 cc, and V 200  < 14 cc. Using an optimal implant technique coupled with optimal planning and appropriate dose constraints, a low rate of toxicity and a good-to-excellent cosmetic outcome of ≥90% is expected. IMB is an effective technique to deliver APBI for appropriately selected women with early-stage breast cancer. This consensus report has been created to assist clinicians in the appropriate practice of APBI using IMB. Copyright © 2017 American Brachytherapy Society. Published by Elsevier Inc. All rights reserved.

Tilted membrane panel: A new module concept to maximize the impact of air bubbles for membrane fouling control in microalgae harvesting.

PubMed

Eliseus, A; Bilad, M R; Nordin, N A H M; Putra, Z A; Wirzal, M D H

2017-10-01

Microalgae harvesting using membrane technology is challenging because of its high fouling propensity. As an established fouling mitigation technique, efficacy of air bubbles can be improved by maximizing the impact of shear-rates in scouring foulant. In this study, it is achieved by tilting the membrane panel. We investigate the effect of tilting angle, switching period as well as aeration rate during microalgal broth filtration. Results show that higher tilting angles (up to 20°) improve permeability of up to 2.7 times of the vertical panel. In addition, operating a one-sided panel is better than a two-sided panel, in which the later involved switching mode. One-sided membrane panel only require a half of area, yet its performance is comparable with of a large-scale module. This tilted panel can lead to significant membrane cost reductions and eventually improves the competitiveness of membrane technology for microalgae harvesting application. Copyright © 2017 Elsevier Ltd. All rights reserved.

Nonlinear vibration and radiation from a panel with transition to chaos induced by acoustic waves

NASA Technical Reports Server (NTRS)

Maestrello, Lucio; Frendi, Abdelkader; Brown, Donald E.

1992-01-01

The dynamic response of an aircraft panel forced at resonance and off-resonance by plane acoustic waves at normal incidence is investigated experimentally and numerically. Linear, nonlinear (period doubling) and chaotic responses are obtained by increasing the sound pressure level of the excitation. The response time history is sensitive to the input level and to the frequency of excitation. The change in response behavior is due to a change in input conditions, triggered either naturally or by modulation of the bandwidth of the incident waves. Off-resonance, bifurcation is diffused and difficult to maintain, thus the panel response drifts into a linear behavior. The acoustic pressure emanated by the panel is either linear or nonlinear as is the vibration response. The nonlinear effects accumulate during the propagation with distance. Results are also obtained on the control of the panel response using damping tape on aluminum panel and using a graphite epoxy panel having the same size and weight. Good agreement is obtained between the experimental and numerical results.

Nonlinear vibration and radiation from a panel with transition to chaos

NASA Technical Reports Server (NTRS)

Maestrello, Lucio; Frendi, Abdelkader; Brown, Donald E.

1992-01-01

The dynamic response of an aircraft panel forced at resonance and off-resonance by plane acoustic waves at normal incidence is investigated experimentally and numerically. Linear, nonlinear (period doubling), and chaotic responses are obtained by increasing the sound pressure level of the excitation. The response time history is sensitive to the input level and to the frequency of excitation. The change in response behavior is due to a change in input conditions, triggered either naturally or by modulation of the bandwidth of the incident waves. Off-resonance bifurcation is diffused and difficult to maintain; thus the panel response drifts into a linear behavior. The acoustic pressure emanated by the panel is either linear or nonlinear as is the vibration response. The nonlinear effects accumulate during the propagation with distance. Results are also obtained on the control of the panel response using damping tape on an aluminum panel and a graphite epoxy panel having the same size and weight. Good agreement is obtained betwen the experimental and numerical results.

POSTOP: Postbuckled open-stiffener optimum panels-theory and capability

NASA Technical Reports Server (NTRS)

Dickson, J. N.; Biggers, S. B.

1984-01-01

The computer program POSTOP was developed to serve as an aid in the analysis and sizing of stiffened composite panels that are loaded in the postbuckling regime. A comprehensive set of analysis routines was coupled to a widely used optimization program to produce this sizing code. POSTOP is intended for the preliminary design of metal or composite panels with open-section stiffeners, subjected to multiple combined biaxial compression (or tension), shear and normal pressure load cases. Longitudinal compression, however, is assumed to be the dominant loading. Temperature, initial bow eccentricity and load eccentricity effects are included. The panel geometry is assumed to be repetitive over several bays in the longitudinal (stiffener) direction as well as in the transverse direction. Analytical routines are included to compute panel stiffnesses, strains, local and panel buckling loads, and skin/stiffener interface stresses. The resulting program is applicable to stiffened panels as commonly used in fuselage, wing, or empennage structures. The analysis procedures and rationale for the assumptions used therein are described in detail.

Orbiter radiator panel solar focusing test

NASA Technical Reports Server (NTRS)

Howell, H. R.

1982-01-01

A test was conducted to determine the solar reflections from the Orbiter radiator panels. A one-tenth scale model of the forward and mid-forward radiator panels in the deployed position was utilized in the test. Test data was obtained to define the reflected one-sun envelope for the embossed silver/Teflon radiator coating. The effects of the double contour on the forward radiator panels were included in the test. Solar concentrations of 2 suns were measured and the one-sun envelope was found to extend approximately 86 inches above the radiator panel. A limited amount of test data was also obtained for the radiator panels with the smooth silver/Teflon coating to support the planned EVA on the Orbiter STS-5 flight. Reflected solar flux concentrations as high as 8 suns were observed with the smooth coating and the one-sun envelope was determined to extend 195 inches above the panel. It is recommended that additional testing be conducted to define the reflected solar environment beyond the one-sun boundary.

Potentially traumatic events have negative and positive effects on loneliness, depending on PTSD-symptom levels: evidence from a population-based prospective comparative study.

PubMed

van der Velden, Peter G; Pijnappel, Bas; van der Meulen, Erik

2018-02-01

Examine to what extent adults affected by recent potentially traumatic events (PTE) with different PTSD-symptom levels are more at risk for post-event loneliness than non-affected adults are in the same study period. We extracted data from the Dutch longitudinal LISS panel to measure pre-event loneliness (2011) and post-event loneliness (2013 and 2014), pre-event mental health problems (2011), PTE and PTSD symptoms (2012). This panel is based on a traditional random sample drawn from the population register by Statistics Netherlands. Results of the multinomial logistic regression analyses showed that affected adults with high levels of PTSD symptoms were more at risk for high levels of post-event loneliness than affected adults with very low PTSD-symptom levels and non-affected adults, while controlling for pre-event loneliness, pre-event mental health problems and demographics. However, affected adults with very low levels of PTSD symptoms compared to non-affected adults were less at risk for medium and high levels of post-event loneliness while controlling for the same variables. Yet, pre-event loneliness appeared to be the strongest independent predictor of loneliness at later stages: more than 80% with high pre-event levels had high post-event levels at both follow-ups. Remarkably, potentially traumatic events have depending on PTSD-symptom levels both negative and positive effects on post-event loneliness in favor of affected adults with very low PTSD symptoms levels. However, post-event levels at later stages are predominantly determined by pre-event loneliness levels.

Fidelity Failures in Brief Strategic Family Therapy for Adolescent Drug Abuse: A Clinical Analysis.

PubMed

Lebensohn-Chialvo, Florencia; Rohrbaugh, Michael J; Hasler, Brant P

2018-04-30

As evidence-based family treatments for adolescent substance use and conduct problems gain traction, cutting edge research moves beyond randomized efficacy trials to address questions such as how these treatments work and how best to disseminate them to community settings. A key factor in effective dissemination is treatment fidelity, which refers to implementing an intervention in a manner consistent with an established manual. While most fidelity research is quantitative, this study offers a qualitative clinical analysis of fidelity failures in a large, multisite effectiveness trial of Brief Strategic Family Therapy (BSFT) for adolescent drug abuse, where BSFT developers trained community therapists to administer this intervention in their own agencies. Using case notes and video recordings of therapy sessions, an independent expert panel first rated 103 cases on quantitative fidelity scales grounded in the BSFT manual and the broader structural-strategic framework that informs BSFT intervention. Because fidelity was generally low, the panel reviewed all cases qualitatively to identify emergent types or categories of fidelity failure. Ten categories of failures emerged, characterized by therapist omissions (e.g., failure to engage key family members, failure to think in threes) and commissions (e.g., off-model, nonsystemic formulations/interventions). Of these, "failure to think in threes" appeared basic and particularly problematic, reflecting the central place of this idea in structural theory and therapy. Although subject to possible bias, our observations highlight likely stumbling blocks in exporting a complex family treatment like BSFT to community settings. These findings also underscore the importance of treatment fidelity in family therapy research. © 2018 Family Process Institute.

Impact of Health Research Systems on Under-5 Mortality Rate: A Trend Analysis.

PubMed

Yazdizadeh, Bahareh; Parsaeian, Mahboubeh; Majdzadeh, Reza; Nikooee, Sima

2016-11-26

Between 1990 and 2015, under-5 mortality rate (U5MR) declined by 53%, from an estimated rate of 91 deaths per 1000 live births to 43, globally. The aim of this study was to determine the share of health research systems in this decrease alongside other influential factors. We used random effect regression models including the 'random intercept' and 'random intercept and random slope' models to analyze the panel data from 1990 to 2010. We selected the countries with U5MRs falling between the first and third quartiles in 1990. We used both the total articles (TA) and the number of child-specific articles (CSA) as a proxy of the health research system. In order to account for the impact of other factors, measles vaccination coverage (MVC) (as a proxy of health system performance), gross domestic product (GDP), human development index (HDI), and corruption perception index (CPI) (as proxies of development), were embedded in the model. Among all the models, 'the random intercept and random slope models' had lower residuals. The same variables of CSA, HDI, and time were significant and the coefficient of CSA was estimated at -0.17; meaning, with the addition of every 100 CSA, the rate of U5MR decreased by 17 per 1000 live births. Although the number of CSA has contributed to the reduction of U5MR, the amount of its contribution is negligible compared to the countries' development. We recommend entering different types of researches into the model separately in future research and including the variable of 'exchange between knowledge generator and user.' © 2017 The Author(s); Published by Kerman University of Medical Sciences. This is an open-access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

A randomized clinical trial of counseling and nicotine replacement therapy for treatment of African American non-daily smokers: Design, accrual, and baseline characteristics.

PubMed

Nollen, Nicole L; Cox, Lisa Sanderson; Mayo, Matthew S; Ellerbeck, Edward F; Madhusudhana, Sheshadri; Ahluwalia, Jasjit S

2018-05-19

Non-daily smokers (NDS) who smoke on some but not all days are a growing subset of United States (US) tobacco users. Racial/ethnic minorities are more likely to be NDS. African American NDS have strikingly high levels of nicotine and carcinogen exposure, making treatment of this high risk group a priority. The current study is one of three ongoing federally-funded clinical trials of NDS and, to our knowledge the only RCT focused on racial/ethnic minority NDS. The design has been guided by input from Patient and Stakeholder Advisory Panels who helped develop the research questions, design the intervention, and select the outcomes. The objective is to compare the effectiveness of smoking cessation counseling alone (C) or smoking cessation counseling plus participant's choice of nicotine replacement therapy (NRT; C + NRT) for African American NDS. Two-hundred seventy-eight African American NDS will be randomized in a 2:1 fashion to C + NRT or C. All participants receive five sessions of smoking cessation counseling; those randomized to C + NRT receive their choice of nicotine gum, patch, and/or lozenge. Treatment in both groups lasts for 12 weeks. We hypothesize that C + NRT will be more effective than C on the primary outcome of biochemically-confirmed abstinence from smoking at week 12. Secondary aims will compare C + NRT and C on patient- and provider-desired outcomes including abstinence from smoking at week 26, change in biochemically-verified nicotine and carcinogen exposure, days abstinent, and treatment process measures (e.g., NRT use and side effects). Predictors of abstinence will also be explored. Findings will illuminate effective treatment options for African American NDS and contribute to development of evidence-based guidelines for treating the 8.9 million US adult NDS for whom no guidelines currently exist. ClinicalTrials.gov: NCT02244918. Copyright © 2017. Published by Elsevier Inc.

Catch-up growth and growth deficits: Nine-year annual panel child growth for native Amazonians in Bolivia

PubMed Central

Zhang, Rebecca; Undurraga, Eduardo A.; Zeng, Wu; Reyes-García, Victoria; Tanner, Susan; Leonard, William R.; Behrman, Jere R.; Godoy, Ricardo A.

2017-01-01

Background Childhood growth stunting is negatively associated with cognitive and health outcomes, claimed to be irreversible after age 2. Aim To estimate growth rates for children 2 ≤ age ≤ 7 who were stunted (sex-age standardized z-score [HAZ] <−2), marginally-stunted (−2≤ HAZ ≤ −1), or not-stunted (HAZ >−1) at baseline and tracked annually until age 11; frequency of movement among height categories; and variation in height predicted by early childhood height. Participants/methods We used a nine-year annual panel (2002–2010) from a native Amazonian society of horticulturalists-foragers (Tsimane’; n=174 girls; 179 boys at baseline) is used. We used descriptive statistics and random-effect regressions. Results We found some evidence of catch-up growth in HAZ but persistent height deficits. Children stunted at baseline improved 1 HAZ unit by age 11, and had higher annual growth rates than non-stunted children. Marginally-stunted boys had a 0.1 HAZ units higher annual growth rate than non-stunted boys. Despite some catch up, ~80% of marginally-stunted children at baseline remained marginally-stunted by age 11. The height deficit increased from age 2 to11. We found modest year-to-year movement between height categories. Conclusions The prevalence of growth faltering among the Tsimane’ has declined, but hurdles still substantially lock children into height categories. PMID:27251215

Counter-advertising may reduce parent's susceptibility to front-of-package promotions on unhealthy foods.

PubMed

Dixon, Helen; Scully, Maree; Kelly, Bridget; Donovan, Robert; Chapman, Kathy; Wakefield, Melanie

2014-01-01

Assess the effect of counter-advertisements on parents' appraisals of unhealthy foods featuring front-of-package promotions (FOPPs). A 2 × 2 × 5 between-subjects Web-based experiment. Parents were randomly shown an advertisement (counter-advertisement challenging FOPP/control advertisement) and then a pair of food products from the same category: an unhealthy product featuring an FOPP (nutrient content claim/sports celebrity endorsement) and a healthier control product with no FOPP. Australia. A total of 1,269 Australian-based parents of children aged 5-12 years recruited from an online panel. Parents nominated which product they would prefer to buy and which they thought was healthier, then rated the unhealthy product and FOPP on various characteristics. Differences between advertisement conditions were assessed using logistic regression (product choice tasks) and analysis of variance tests (ratings of unhealthy product and FOPP). Compared with parents who saw a control advertisement, parents who saw a counter-advertisement perceived unhealthy products featuring FOPPs as less healthy, expressed weaker intentions for buying such products, and were more likely to read the nutrition facts panel before nominating choices (all P < .001). Counter-advertising may help reduce the misleading influence of unhealthy food marketing and improve the accuracy of parents' evaluations of how nutritious promoted food products are. Copyright © 2014 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Using advertisement light-panel and CMOS image sensor with frequency-shift-keying for visible light communication.

PubMed

Chow, Chi-Wai; Shiu, Ruei-Jie; Liu, Yen-Chun; Liao, Xin-Lan; Lin, Kun-Hsien; Wang, Yi-Chang; Chen, Yi-Yuan

2018-05-14

A frequency-shift-keying (FSK) visible light communication (VLC) system is proposed and demonstrated using advertisement light-panel as transmitter and mobile-phone image sensor as receiver. The developed application program (APP) in mobile-phone can retrieve the rolling shutter effect (RSE) pattern produced by the FSK VLC signal effectively. Here, we also define noise-ratio value (NRV) to evaluate the contrast of different advertisements displayed on the light-panel. Both mobile-phones under test can achieve success rate > 96% even when the transmission distance is up to 200 cm and the NRVs are low.

Photovoltaic cell with thin CS layer

DOEpatents

Jordan, John F.; Albright, Scot P.

1994-01-18

An improved photovoltaic panel and method of forming a photovoltaic panel are disclosed for producing a high efficiency CdS/CdTe photovoltaic cell. The photovoltaic panel of the present invention is initially formed with a substantially thick Cds layer, and the effective thickness of the CdS layer is substantially reduced during regrowth to both form larger diameter CdTe crystals and substantially reduce the effective thickness of the C This invention was made with Government support under Subcontract No. ZL-7-06031-3 awarded by the Department of Energy. The Government has certain rights in this invention.

A Cost-Effective Energy-Recovering Sustain Driving Circuit for ac Plasma Display Panels

NASA Astrophysics Data System (ADS)

Lim, Jae Kwang; Tae, Heung-Sik; Choi, Byungcho; Kim, Seok Gi

A new sustain driving circuit, featuring an energy-recovering function with simple structure and minimal component count, is proposed as a cost-effective solution for driving plasma display panels during the sustaining period. Compared with existing solutions, the proposed circuit reduces the number of semiconductor switches and reactive circuit components without compromising the circuit performance and gas-discharging characteristics. In addition, the proposed circuit utilizes the harness wire as an inductive circuit component, thereby further simplifying the circuit structure. The performance of the proposed circuit is confirmed with a 42-inch plasma display panel.

Effects of pressing schedule on formation of vertical density profile for MDF panels

Treesearch

Zhiyong Cai; James H. Muehl; Jerrold E. Winandy

2006-01-01

A fundamental understanding of mat consolidation during hot pressing will help to optimize the medium-density fiberboard (MDF) manufacturing process by increasing productivity, improving product quality, and enhancing durability. Effects of panel density, fiber moisture content (MC), and pressing schedule on formation of vertical density profile (VDP) during hot...

Panel Conditioning in the General Social Survey

ERIC Educational Resources Information Center

Halpern-Manners, Andrew; Warren, John Robert; Torche, Florencia

2017-01-01

Does participation in one wave of a survey have an effect on respondents' answers to questions in subsequent waves? In this article, we investigate the presence and magnitude of "panel conditioning" effects in one of the most frequently used data sets in the social sciences: the General Social Survey (GSS). Using longitudinal records…

Effects of recycled fiber on the properties of fiberboard panels

Treesearch

Chin-yin Hwang; Chung-yun Hse; Todd F. Shupe

2005-01-01

This study examined the effects of recycled and virgin wood fiber on the properties of fiberboard. Replacing virgin fiber with recycled fiber adversely affected physical and mechanical properties of fiberboard. Bending properties and dimensional stability were linearly dependent on virgin fiber ratios. Based on strength properties, panels with 20 and 40 percent...

The Effects of Minimum Wages on Teenage Employment, Enrollment, and Idleness.

ERIC Educational Resources Information Center

Neumark, David

A study described the effects of minimum wages on teenagers by using individual-level panel data on school and work transitions of teenagers. Panel data from 1979-92 measuring transitions among alternative employment and enrollment activities of teenagers were obtained from matched Current Population Surveys data sets. Findings indicated that…

Heterogeneity of antibody response to human platelet transfusion.

PubMed Central

Wu, K K; Thompson, J S; Koepke, J A; Hoak, J C; Flink, R

1976-01-01

To study the antibody response to human platelet transfusions, nine thrombocytopenia patients with bone marrow failure were given 6 U (3X10(11)) of random platelet concentrates twice a week. Before transfusion, none of the patients had preexisting antibodies detectable with lymphocytotoxicity, platelet aggregation, or capillary leukoagglutination techniques. After receiving 18-78 U of platelets, they became refractory to further transfusions of random platelets and alloantibodies were detectable. Two patterns of antibody response could be identified. In three patients, the sera were not lymphocytotoxic with a panel of standard cells in which all the known HLA antigens in the first and second series were represented at least once. Yet, they caused platelet aggregation with 30, 24, and 60%, respectively, of a donor population studied. The aggregating activities were inhibited by antihuman IgG but not by antihuman IgA or antihuman IgM antiserum. The aggregating antibodies could be absorbed out with donor platelets but not lymphocytes or granulocytes. Antibodies from two of these patients aggregated platelets of their respective siblings matched for both HLA haplotypes. Transfusion of platelets from these two siblings did not increase the platelet count while platelets obtained from aggregation-negative donors did. The sera from the remaining six patients were lymphocytotoxic with 15-100% of the panel of standard cells. They also had aggregating antibodies, which could be absorbed out by both platelets and lymphocytes, suggesting that they were HLA antibodies. These data suggest that the development of platelet-specific antibodies may play an important role in the immunological rejection of isologous platelets, and should be considered in the selection of donors for patients who are refractory to platelets from random donors. PMID:956376

Hydroclimatic projections for the Murray-Darling Basin based on an ensemble derived from Intergovernmental Panel on Climate Change AR4 climate models

NASA Astrophysics Data System (ADS)

Sun, Fubao; Roderick, Michael L.; Lim, Wee Ho; Farquhar, Graham D.

2011-12-01

We assess hydroclimatic projections for the Murray-Darling Basin (MDB) using an ensemble of 39 Intergovernmental Panel on Climate Change AR4 climate model runs based on the A1B emissions scenario. The raw model output for precipitation, P, was adjusted using a quantile-based bias correction approach. We found that the projected change, ΔP, between two 30 year periods (2070-2099 less 1970-1999) was little affected by bias correction. The range for ΔP among models was large (˜±150 mm yr-1) with all-model run and all-model ensemble averages (4.9 and -8.1 mm yr-1) near zero, against a background climatological P of ˜500 mm yr-1. We found that the time series of actually observed annual P over the MDB was indistinguishable from that generated by a purely random process. Importantly, nearly all the model runs showed similar behavior. We used these facts to develop a new approach to understanding variability in projections of ΔP. By plotting ΔP versus the variance of the time series, we could easily identify model runs with projections for ΔP that were beyond the bounds expected from purely random variations. For the MDB, we anticipate that a purely random process could lead to differences of ±57 mm yr-1 (95% confidence) between successive 30 year periods. This is equivalent to ±11% of the climatological P and translates into variations in runoff of around ±29%. This sets a baseline for gauging modeled and/or observed changes.

An investigation of the effect of an essential oil mouthrinse on induced bacteraemia: a pilot study.

PubMed

Fine, Daniel H; Furgang, David; McKiernan, Marie; Tereski-Bischio, Debra; Ricci-Nittel, Danette; Zhang, Paul; Araujo, Marcelo W B

2010-09-01

This pilot study was designed to assess the effect of an essential oil antiseptic mouthrinse (EOM) in reducing bloodstream bacteria after chewing an apple. From a panel of 200, we screened 62 individuals with mild-to-moderate gingivitis. Twenty-two individuals who showed a bacteraemia after chewing an apple were enrolled. Subjects were recalled, instructed to chew an apple, had blood drawn (first baseline), and were randomly assigned EOM or a control (C) treatment for 2 weeks. Subjects were recalled, given an apple, and had blood taken for bacterial counts. Following a 1-week fluoride dentifrice wash-out, subjects were recalled, given the apple challenge, had blood drawn (second baseline), assigned the alternate treatment, and recalled for testing. Differences between baseline and 2-week post-treatment (EOM versus C) in blood-borne bacteria were assessed by analysis of covariance. Mean aerobic blood-borne bacteria decreased by 68.5% (17.7 viable counts from baseline; p<0.001), while anaerobic counts decreased by 70.7% (14.5 mean viable counts from baseline; p<0.001) for the EOM treatment. No reduction was seen for the C treatment. This double-blind, placebo-controlled, randomized, 2-week cross-over study showed that rinsing with essential oils reduced the level of bloodstream bacteria in subjects with mild-to-moderate gingivitis.

Height premium for job performance.

PubMed

Kim, Tae Hyun; Han, Euna

2017-08-01

This study assessed the relationship of height with wages, using the 1998 and 2012 Korean Labor and Income Panel Study data. The key independent variable was height measured in centimeters, which was included as a series of dummy indicators of height per 5cm span (<155cm, 155-160cm, 160-165cm, and ≥165cm for women; <165cm, 165-170cm, 170-175cm, 175-180cm, and ≥180cm for men). We controlled for household- and individual-level random effects. We used a random-effect quantile regression model for monthly wages to assess the heterogeneity in the height-wage relationship, across the conditional distribution of monthly wages. We found a non-linear relationship of height with monthly wages. For men, the magnitude of the height wage premium was overall larger at the upper quantile of the conditional distribution of log monthly wages than at the median to low quantile, particularly in professional and semi-professional occupations. The height-wage premium was also larger at the 90th quantile for self-employed women and salaried men. Our findings add a global dimension to the existing evidence on height-wage premium, demonstrating non-linearity in the association between height and wages and heterogeneous changes in the dispersion and direction of the association between height and wages, by wage level. Copyright © 2017 Elsevier B.V. All rights reserved.

The role of driver age in performance and attention allocation effects of roadway sign count, format and familiarity.

PubMed

Zahabi, Maryam; Machado, Patricia; Pankok, Carl; Lau, Mei Ying; Liao, Yi-Fan; Hummer, Joseph; Rasdorf, William; Kaber, David B

2017-09-01

White-on-blue logo signs are used to inform drivers of food, gas, lodging, and attraction businesses at highway interchanges. In this study, 60 drivers were asked to look for food and attraction targets on logo signs while driving in a realistic freeway simulation. The objective of the study was to quantify effects of the number of sign panels (six vs. nine), logo familiarity (familiar vs. unfamiliar), logo format (text vs. pictorial), and driver age (young, middle, and elderly) on performance, attention allocation and target identification accuracy. Results revealed elderly drivers to exhibit worse performance in comparison to middle-age and young groups even though they adopted a more conservative driving strategy. There was no significant effect of the number of panels, logo familiarity, and logo format on driver performance or attention allocation. In target identification, drivers were more accurate with familiar or text-based panels appearing in six-panel signs. Copyright © 2017 Elsevier Ltd. All rights reserved.

The outcast-lash-out effect in youth: alienation increases aggression following peer rejection.

PubMed

Reijntjes, Albert; Thomaes, Sander; Bushman, Brad J; Boelen, Paul A; de Castro, Bram Orobio; Telch, Michael J

2010-10-01

Although there are good theoretical reasons to believe that youth who are high in alienation (i.e., estranged from society, significant others, and themselves) are prone to behave aggressively, empirical evidence is lacking. The present experiment tested whether alienation moderates the effects of acute peer rejection on aggression in youth. Participants (N = 121; mean age = 11.5 years) completed a personal profile (e.g., "How do you describe yourself?") that was allegedly evaluated online by a panel of peer judges. After randomly receiving negative or positive feedback from peer judges, participants were given the opportunity to aggress against them (i.e., by reducing their monetary reward and by posting negative comments about them online). As predicted, alienation increased participants' aggression against peers who had rejected them, but not against peers who had praised them, even after controlling for peer-nominated chronic rejection and peer-nominated aggression. Thus, alienated youth are more aggressive than others when they experience acute peer rejection.

Education and Psychological Distress of Older Chinese: Exploring the Longitudinal Relationship and Its Subgroup Variations.

PubMed

Zhang, Wei; Chen, Huashuai; Feng, Qiushi

2015-10-01

The goal of this study is to examine whether and how education predicts distress for older Chinese and whether this association varies by age, gender, and rural/urban residence. The random-effect panel model and Heckman selection model were used to analyze four waves of data with a total sample size of 54,405 from the Chinese Longitudinal Healthy Longevity Survey. We found the following: (a) There is a persistent and negative association between education and distress among older Chinese; (b) education predicts lower levels of distress over time and this is particularly true for males, urban residents, and the young-old; and (c) the effect of education on distress is largely explained by physical health, economic conditions, and a three-dimensional framework of leisure-time activities. Our findings strengthen the external validity of the relationship between education and health and suggest the dynamic patterns on the subgroup variations within the association in China. © The Author(s) 2015.

Do gender gaps in education and health affect economic growth? A cross-country study from 1975 to 2010.

PubMed

Mandal, Bidisha; Batina, Raymond G; Chen, Wen

2018-05-01

We use system-generalized method-of-moments to estimate the effect of gender-specific human capital on economic growth in a cross-country panel of 127 countries between 1975 and 2010. There are several benefits of using this methodology. First, a dynamic lagged dependent econometric model is suitable to address persistence in per capita output. Second, the generalized method-of-moments estimator uses dynamic properties of the data to generate appropriate instrumental variables to address joint endogeneity of the explanatory variables. Third, we allow the measurement error to include unobserved country-specific effect and random noise. We include two gender-disaggregated measures of human capital-education and health. We find that gender gap in health plays a critical role in explaining economic growth in developing countries. Our results provide aggregate evidence that returns to investments in health systematically differ across gender and between low-income and high-income countries. Copyright © 2018 John Wiley & Sons, Ltd.

The analysis of non-linear dynamic behavior (including snap-through) of postbuckled plates by simple analytical solution

NASA Technical Reports Server (NTRS)

Ng, C. F.

1988-01-01

Static postbuckling and nonlinear dynamic analysis of plates are usually accomplished by multimode analyses, although the methods are complicated and do not give straightforward understanding of the nonlinear behavior. Assuming single-mode transverse displacement, a simple formula is derived for the transverse load displacement relationship of a plate under in-plane compression. The formula is used to derive a simple analytical expression for the static postbuckling displacement and nonlinear dynamic responses of postbuckled plates under sinusoidal or random excitation. Regions with softening and hardening spring behavior are identified. Also, the highly nonlinear motion of snap-through and its effects on the overall dynamic response can be easily interpreted using the single-mode formula. Theoretical results are compared with experimental results obtained using a buckled aluminum panel, using discrete frequency and broadband point excitation. Some important effects of the snap-through motion on the dynamic response of the postbuckled plates are found.

Simple, efficient, and cost-effective multiplex genotyping with matrix assisted laser desorption/ionization time-of-flight mass spectrometry of hemoglobin beta gene mutations.

PubMed

Thongnoppakhun, Wanna; Jiemsup, Surasak; Yongkiettrakul, Suganya; Kanjanakorn, Chompunut; Limwongse, Chanin; Wilairat, Prapon; Vanasant, Anusorn; Rungroj, Nanyawan; Yenchitsomanus, Pa-Thai

2009-07-01

A number of common mutations in the hemoglobin beta (HBB) gene cause beta-thalassemia, a monogenic disease with high prevalence in certain ethnic groups. As there are 30 HBB variants that cover more than 99.5% of HBB mutant alleles in the Thai population, an efficient and cost-effective screening method is required. Three panels of multiplex primer extensions, followed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry were developed. The first panel simultaneously detected 21 of the most common HBB mutations, while the second panel screened nine additional mutations, plus seven of the first panel for confirmation; the third panel was used to confirm three HBB mutations, yielding a 9-Da mass difference that could not be clearly distinguished by the previous two panels. The protocol was both standardized using 40 samples of known genotypes and subsequently validated in 162 blind samples with 27 different genotypes (including a normal control), comprising heterozygous, compound heterozygous, and homozygous beta-thalassemia. Results were in complete agreement with those from the genotyping results, conducted using three different methods overall. The method developed here permitted the detection of mutations missed using a single genotyping procedure. The procedure should serve as the method of choice for HBB genotyping due to its accuracy, sensitivity, and cost-effectiveness, and can be applied to studies of other gene variants that are potential disease biomarkers.

Text Line Detection from Rectangle Traffic Panels of Natural Scene

NASA Astrophysics Data System (ADS)

Wang, Shiyuan; Huang, Linlin; Hu, Jian

2018-01-01

Traffic sign detection and recognition is very important for Intelligent Transportation. Among traffic signs, traffic panel contains rich information. However, due to low resolution and blur in the rectangular traffic panel, it is difficult to extract the character and symbols. In this paper, we propose a coarse-to-fine method to detect the Chinese character on traffic panels from natural scenes. Given a traffic panel Color Quantization is applied to extract candidate regions of Chinese characters. Second, a multi-stage filter based on learning is applied to discard the non-character regions. Third, we aggregate the characters for text lines by Distance Metric Learning method. Experimental results on real traffic images from Baidu Street View demonstrate the effectiveness of the proposed method.

A retrospective analysis of the effect of discussion in teleconference and face-to-face scientific peer-review panels

PubMed Central

Carpenter, Afton S; Sullivan, Joanne H; Deshmukh, Arati; Glisson, Scott R; Gallo, Stephen A

2015-01-01

Objective With the use of teleconferencing for grant peer-review panels increasing, further studies are necessary to determine the efficacy of the teleconference setting compared to the traditional onsite/face-to-face setting. The objective of this analysis was to examine the effects of discussion, namely changes in application scoring premeeting and postdiscussion, in these settings. We also investigated other parameters, including the magnitude of score shifts and application discussion time in face-to-face and teleconference review settings. Design The investigation involved a retrospective, quantitative analysis of premeeting and postdiscussion scores and discussion times for teleconference and face-to-face review panels. The analysis included 260 and 212 application score data points and 212 and 171 discussion time data points for the face-to-face and teleconference settings, respectively. Results The effect of discussion was found to be small, on average, in both settings. However, discussion was found to be important for at least 10% of applications, regardless of setting, with these applications moving over a potential funding line in either direction (fundable to unfundable or vice versa). Small differences were uncovered relating to the effect of discussion between settings, including a decrease in the magnitude of the effect in the teleconference panels as compared to face-to-face. Discussion time (despite teleconferences having shorter discussions) was observed to have little influence on the magnitude of the effect of discussion. Additionally, panel discussion was found to often result in a poorer score (as opposed to an improvement) when compared to reviewer premeeting scores. This was true regardless of setting or assigned reviewer type (primary or secondary reviewer). Conclusions Subtle differences were observed between settings, potentially due to reduced engagement in teleconferences. Overall, further research is required on the psychology of decision-making, team performance and persuasion to better elucidate the group dynamics of telephonic and virtual ad-hoc peer-review panels. PMID:26351194

Structured hypocaloric diet is more effective than behavioral therapy in reducing metabolic syndrome in Mexican postmenopausal women: a randomized controlled trial.

PubMed

Perichart-Perera, Otilia; Balas-Nakash, Margie; Muñoz-Manrique, Cinthya; Legorreta-Legorreta, Jennifer; Rodríguez-Cano, Ameyalli; Mier-Cabrera, Jennifer; Aguilera-Pérez, Jesús Rafael

2014-07-01

This study aims to compare the effects of a lifestyle intervention using a behavioral therapy (BT) approach with the effects of a cardioprotective structured hypocaloric diet on metabolic syndrome in Mexican postmenopausal women. This study is a randomized clinical trial (2006-2009) of Mexican postmenopausal women with metabolic syndrome (Adult Treatment Panel III criteria) who were recruited from the Postmenopause Clinic of the National Institute of Perinatology in Mexico City. Women were assigned to one of two groups--group 1 (structured hypocaloric diet; n = 63): energy restriction (-300 to -500 kcal/d) emphasizing cardioprotective dietary changes; and group 2 (BT; n = 55): goal setting, problem-solving, and stimulus control to achieve cardioprotective dietary and lifestyle recommendations. Metabolic syndrome prevalence, as well as weight, waist circumference, fat mass, and fasting biochemical markers (glucose and lipid profile), were measured at baseline and at 2, 4, and 6 months after the intervention. Metabolic syndrome risk (relative risk and absolute risk reduction), mean differences between groups, and logistic regression were evaluated using Statistical Package for the Social Sciences software, version 17.0. A total of 118 women were studied (mean [SD] age, 53.81 [6.43] y). No baseline differences were observed between groups. At the end of the study, a higher reduction in metabolic syndrome prevalence was observed in group 1 (-38.1%) compared with group 2 (-12.7%; relative risk, 0.237; 95% CI, 0.092-0.608; P = 0.003). The effect was maintained even when adjusted by age, hormone therapy and antihypertensive drug use. A cardioprotective structured hypocaloric diet is more effective than the BT approach in reducing metabolic syndrome after 6 months of intervention. Both strategies have positive effects on different individual cardiovascular risk factors.

Warpage of Large Curved Composite Panels due to Manufacturing Anomalies

NASA Technical Reports Server (NTRS)

Starnes, James H., Jr. (Technical Monitor); Ambur, Damadar (Technical Monitor); Ochinero, T. T.; Hyer, M. W.

2002-01-01

This paper discusses the influences of a misaligned layer, a resin-rich slightly thicker layer, and a small thermal gradient on the thermally-induced deformations of large curved composite panels during cooldown from their cure temperature. The deformations represent warpage of the panels due to anomalies that occur during layup, consolidation, and cure. Two-dimensional finite element analyses are used The deformations are categorized as to their impact on circumferential and twist warpage metrics. The results are intended to highlight the sensitivity of manufactured panel shape to the various unwanted effects that can occur during manufacturing.

Integrated Solar-Panel Antenna Array for CubeSats

NASA Technical Reports Server (NTRS)

Baktur, Reyhan

2016-01-01

The goal of the Integrated Solar-Panel Antenna Array for CubeSats (ISAAC) project is to design and demonstrate an effective and efficien toptically transparent, high-gain, lightweight, conformal X-band antenna array that is integrated with the solar panels of a CubeSat. The targeted demonstration is for a Near Earth Network (NEN)radio at X-band, but the design can be easilyscaled to other network radios for higher frequencies. ISAAC is a less expensive and more flexible design for communication systemscompared to a deployed dish antenna or the existing integrated solar panel antenna design.

Thermal and Optical Properties of Low-E Storm Windows and Panels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Culp, Thomas D.; Widder, Sarah H.; Cort, Katherine A.

Installing low-emissivity (low-E) storm windows and panels over existing windows has been identified as a cost-effective new approach for improving the energy efficiency of existing buildings where window replacement is impractical or too expensive. As such, it is desirable to characterize the key energy performance properties of low-E storm windows and panels when installed over different types of existing primary windows. this paper presents the representative U-factors, solar heat gain coefficients (SGHCs) and visible transmittance properties of the combined assemblies of various storm windows and panel types installed over different primary windows.

The microbial and quality properties of poultry carcasses treated with peracetic acid as an antimicrobial treatment.

PubMed

Bauermeister, L J; Bowers, J W J; Townsend, J C; McKee, S R

2008-11-01

Salmonella spp. and Campylobacter spp. continue to be prominent food safety concerns for the poultry industry and consumers alike. Peracetic acid (PAA) has been approved as an antimicrobial for use in poultry chillers. To validate its effectiveness, 100 poultry carcasses (per replication x 2) were inoculated with Salmonella (10(6) cfu) or Campylobacter (10(6) cfu) and were randomly allocated into chill water containing chlorine (0.003%) or PAA (0.0025%, 0.01%, or 0.02%). Results indicated that PAA concentrations as low as 0.0025% were effective in decreasing Salmonella spp., whereas PAA levels of 0.02% were effective in decreasing Campylobacter spp. when compared with the chlorine treatment. A sensory study was also conducted with another set of 500 carcasses (not inoculated). Birds were treated with water, chlorine (0.003%), or PAA (0.01%, 0.015%, or 0.02%). Sensory panels and microbial data were collected weekly on randomly sampled carcasses that were stored at 4 degrees C for 21 d. The PAA-treated carcasses at 0.015% and 0.02% had an extended shelf-life compared with those treated with water or chlorine. Specifically, on d 15, the only treatments that could be served to sensory panelists were the carcasses treated with 0.015% or 0.02% PAA. The carcasses treated with water, chlorine, or 0.01% PAA had off-colors, off-odors, and high microbial counts. These results suggest that PAA may be an effective antimicrobial when used in poultry chiller applications and greater levels (>or=0.015%) may extend product shelf-life.

Open-Mode Debonding Analysis of Curved Sandwich Panels Subjected to Heating and Cryogenic Cooling on Opposite Faces

NASA Technical Reports Server (NTRS)

Ko, William L.

1999-01-01

Increasing use of curved sandwich panels as aerospace structure components makes it vital to fully understand their thermostructural behavior and identify key factors affecting the open-mode debonding failure. Open-mode debonding analysis is performed on a family of curved honeycomb-core sandwich panels with different radii of curvature. The curved sandwich panels are either simply supported or clamped, and are subjected to uniform heating on the convex side and uniform cryogenic cooling on the concave side. The finite-element method was used to study the effects of panel curvature and boundary condition on the open-mode stress (radial tensile stress) and displacement fields in the curved sandwich panels. The critical stress point, where potential debonding failure could initiate, was found to be at the midspan (or outer span) of the inner bonding interface between the sandwich core and face sheet on the concave side, depending on the boundary condition and panel curvature. Open-mode stress increases with increasing panel curvature, reaching a maximum value at certain high curvature, and then decreases slightly as the panel curvature continues to increase and approach that of quarter circle. Changing the boundary condition from simply supported to clamped reduces the magnitudes of open-mode stresses and the associated sandwich core depth stretching.

Population and performance analyses of four major populations with Illumina's FGx Forensic Genomics System.

PubMed

Churchill, Jennifer D; Novroski, Nicole M M; King, Jonathan L; Seah, Lay Hong; Budowle, Bruce

2017-09-01

The MiSeq FGx Forensic Genomics System (Illumina) enables amplification and massively parallel sequencing of 59 STRs, 94 identity informative SNPs, 54 ancestry informative SNPs, and 24 phenotypic informative SNPs. Allele frequency and population statistics data were generated for the 172 SNP loci included in this panel on four major population groups (Chinese, African Americans, US Caucasians, and Southwest Hispanics). Single-locus and combined random match probability values were generated for the identity informative SNPs. The average combined STR and identity informative SNP random match probabilities (assuming independence) across all four populations were 1.75E-67 and 2.30E-71 with length-based and sequence-based STR alleles, respectively. Ancestry and phenotype predictions were obtained using the ForenSeq™ Universal Analysis System (UAS; Illumina) based on the ancestry informative and phenotype informative SNP profiles generated for each sample. Additionally, performance metrics, including profile completeness, read depth, relative locus performance, and allele coverage ratios, were evaluated and detailed for the 725 samples included in this study. While some genetic markers included in this panel performed notably better than others, performance across populations was generally consistent. The performance and population data included in this study support that accurate and reliable profiles were generated and provide valuable background information for laboratories considering internal validation studies and implementation. Copyright © 2017 Elsevier B.V. All rights reserved.