WindPACT Reference Wind Turbines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dykes, Katherine L; Rinker, Jennifer

To fully understand how loads and turbine cost scale with turbine size, it is necessary to have identical turbine models that have been scaled to different rated powers. The report presents the WindPACT baseline models, which are a series of four baseline models that were designed to facilitate investigations into the scalings of loads and turbine cost with size. The models have four different rated powers (750 kW, 1.5 MW, 3.0 MW, and 5.0 MW), and each model was designed to its specified rated power using the same design methodology. The models were originally implemented in FAST_AD, the predecessor tomore » NREL's open-source wind turbine simulator FAST, but have yet to be implemented in FAST. This report contains the specifications for all four WindPACT baseline models - including structural, aerodynamic, and control specifications - along with the inherent assumptions and equations that were used to calculate the model parameters. It is hoped that these baseline models will serve as extremely useful resources for investigations into the scalings of costs, loads, or optimization routines.« less

Energy and time determine scaling in biological and computer designs

PubMed Central

Bezerra, George; Edwards, Benjamin; Brown, James; Forrest, Stephanie

2016-01-01

Metabolic rate in animals and power consumption in computers are analogous quantities that scale similarly with size. We analyse vascular systems of mammals and on-chip networks of microprocessors, where natural selection and human engineering, respectively, have produced systems that minimize both energy dissipation and delivery times. Using a simple network model that simultaneously minimizes energy and time, our analysis explains empirically observed trends in the scaling of metabolic rate in mammals and power consumption and performance in microprocessors across several orders of magnitude in size. Just as the evolutionary transitions from unicellular to multicellular animals in biology are associated with shifts in metabolic scaling, our model suggests that the scaling of power and performance will change as computer designs transition to decentralized multi-core and distributed cyber-physical systems. More generally, a single energy–time minimization principle may govern the design of many complex systems that process energy, materials and information. This article is part of the themed issue ‘The major synthetic evolutionary transitions’. PMID:27431524

Energy and time determine scaling in biological and computer designs.

PubMed

Moses, Melanie; Bezerra, George; Edwards, Benjamin; Brown, James; Forrest, Stephanie

2016-08-19

Metabolic rate in animals and power consumption in computers are analogous quantities that scale similarly with size. We analyse vascular systems of mammals and on-chip networks of microprocessors, where natural selection and human engineering, respectively, have produced systems that minimize both energy dissipation and delivery times. Using a simple network model that simultaneously minimizes energy and time, our analysis explains empirically observed trends in the scaling of metabolic rate in mammals and power consumption and performance in microprocessors across several orders of magnitude in size. Just as the evolutionary transitions from unicellular to multicellular animals in biology are associated with shifts in metabolic scaling, our model suggests that the scaling of power and performance will change as computer designs transition to decentralized multi-core and distributed cyber-physical systems. More generally, a single energy-time minimization principle may govern the design of many complex systems that process energy, materials and information.This article is part of the themed issue 'The major synthetic evolutionary transitions'. © 2016 The Author(s).

Psychometric Properties of the Working Memory Rating Scale for Spanish-Speaking English Language Learners

ERIC Educational Resources Information Center

Guzman-Orth, Danielle; Grimm, Ryan; Gerber, Michael; Orosco, Michael; Swanson, H. Lee; Lussier, Cathy

2015-01-01

The Working Memory Rating Scale (WMRS) was designed as a behavioral rating tool to assist teachers in identifying students at risk of working memory difficulties. The instrument was originally normed on 417 monolingual English-speaking children from the United Kingdom. The purpose of this study was to test the reliability and validity of the WMRS…

The Evaluation of Child Care Centers and the "Infant/Toddler Environment Rating Scale": An Environmental Critique.

ERIC Educational Resources Information Center

Moore, Gary T.

This paper questions the physical environmental adequacy of the Infant/Toddler Environment Rating Scale (ITERS) developed by Thelma Harms, Debby Cryer, and Richard Clifford at the University of North Carolina, Chapel Hill. ITERS is a 35-item scale designed to assess the quality of center-based infant and toddler care, and one of a family of child…

Centre-Based Child Care Quality in Urban Australia

ERIC Educational Resources Information Center

Ishimine, Karin; Wilson, Rachel

2009-01-01

This study investigates the quality of childcare centres in urban Australian communities designated according to different bands of Centre Location Demographics (CLD). Childcare centres were assessed using the Early Childhood Environment Rating Scale- Revised Edition (ECERS-R) and the Early Childhood Environment Rating Scale-Extension (ECERS-E).…

Exploring Incomplete Rating Designs with Mokken Scale Analysis

ERIC Educational Resources Information Center

Wind, Stefanie A.; Patil, Yogendra J.

2018-01-01

Recent research has explored the use of models adapted from Mokken scale analysis as a nonparametric approach to evaluating rating quality in educational performance assessments. A potential limiting factor to the widespread use of these techniques is the requirement for complete data, as practical constraints in operational assessment systems…

FAPRS Manual: Manual for the Functional Analytic Psychotherapy Rating Scale

ERIC Educational Resources Information Center

Callaghan, Glenn M.; Follette, William C.

2008-01-01

The Functional Analytic Psychotherapy Rating Scale (FAPRS) is behavioral coding system designed to capture those essential client and therapist behaviors that occur during Functional Analytic Psychotherapy (FAP). The FAPRS manual presents the purpose and rules for documenting essential aspects of FAP. The FAPRS codes are exclusive and exhaustive…

Preliminary Validation of the Motor Skills Rating Scale

ERIC Educational Resources Information Center

Cameron, Claire E.; Chen, Wei-Bing; Blodgett, Julia; Cottone, Elizabeth A.; Mashburn, Andrew J.; Brock, Laura L.; Grissmer, David

2012-01-01

This study examined psychometric properties of the Motor Skills Rating Scale (MSRS), a questionnaire designed for classroom teachers of children in early elementary school. Items were developed with the guidance of two occupational therapists, and factor structure was examined with an exploratory factor analysis (EFA). The resulting model showed…

STE thrust chamber technology: Main injector technology program and nozzle Advanced Development Program (ADP)

NASA Technical Reports Server (NTRS)

1993-01-01

The purpose of the STME Main Injector Program was to enhance the technology base for the large-scale main injector-combustor system of oxygen-hydrogen booster engines in the areas of combustion efficiency, chamber heating rates, and combustion stability. The initial task of the Main Injector Program, focused on analysis and theoretical predictions using existing models, was complemented by the design, fabrication, and test at MSFC of a subscale calorimetric, 40,000-pound thrust class, axisymmetric thrust chamber operating at approximately 2,250 psi and a 7:1 expansion ratio. Test results were used to further define combustion stability bounds, combustion efficiency, and heating rates using a large injector scale similar to the Pratt & Whitney (P&W) STME main injector design configuration including the tangential entry swirl coaxial injection elements. The subscale combustion data was used to verify and refine analytical modeling simulation and extend the database range to guide the design of the large-scale system main injector. The subscale injector design incorporated fuel and oxidizer flow area control features which could be varied; this allowed testing of several design points so that the STME conditions could be bracketed. The subscale injector design also incorporated high-reliability and low-cost fabrication techniques such as a one-piece electrical discharged machined (EDMed) interpropellant plate. Both subscale and large-scale injectors incorporated outer row injector elements with scarfed tip features to allow evaluation of reduced heating rates to the combustion chamber.

The Impact of Silhouette Randomization on the Results of Figure Rating Scales

ERIC Educational Resources Information Center

Duncan, Michael J.; Dodd, Lorna J.; Al-Nakeeb, Yahya

2005-01-01

This study was designed to examine the impact of silhouette randomization on the responses to rating scales developed to rate the perceived current and ideal body shape, as well as body dissatisfaction. Seventy students (30 men and 40 women), ages 18 to 43 (M [plus or minus] SD = 22.1 [plus or minus] 5.7) years, completed the Stunkard, Sorensen,…

A Technique for the Assessment of Flight Operability Characteristics of Human Rated Spacecraft

NASA Technical Reports Server (NTRS)

Crocker, Alan

2010-01-01

In support of new human rated spacecraft development programs, the Mission Operations Directorate at NASA Johnson Space Center has implemented a formal method for the assessment of spacecraft operability. This "Spacecraft Flight Operability Assessment Scale" defines six key themes of flight operability, with guiding principles and goals stated for each factor. A standardized rating technique provides feedback that is useful to the operations, design and program management communities. Applicability of this concept across the program structure and life cycle is addressed. Examples of operationally desirable and undesirable spacecraft design characteristics are provided, as is a sample of the assessment scale product.

Design of rocker switches for work-vehicles--an application of Kansei Engineering.

PubMed

Schütte, Simon; Eklund, Jörgen

2005-09-01

Rocker switches used in vehicles meet high demands partly due to the increased focus on customer satisfaction. Previous studies focused on ergonomics and usability rather than design for emotions and affection. The aim of this study was to determine how and to what extent engineering properties influence the perception of rocker switches. Secondary aims were to compare two types of rating scales and to determine consistency over time of the ratings. As a method Kansei Engineering was used, describing a product domain from a physical and semantic point of view. A model was built and validated, and recommendations for new designs were given. It was seen that the subjective impressions of robustness, precision and design are strongly influenced by the zero position, the contact position, the form-ratio, shape and the surface of rocker switches. A 7-point scale was found suitable. The Kansei ratings were consistent over time.

Technical Adequacy of the Disruptive Behavior Rating Scale-2nd Edition--Self-Report

ERIC Educational Resources Information Center

Erford, Bradley T.; Miller, Emily M.; Isbister, Katherine

2015-01-01

This study provides preliminary analysis of the Disruptive Behavior Rating Scale-2nd Edition--Self-Report, which was designed to screen individuals aged 10 years and older for anxiety and behavior symptoms. Score reliability and internal and external facets of validity were good for a screening-level test.

Making Long-Lasting Changes with the Environment Rating Scales

ERIC Educational Resources Information Center

Harms, Thelma

2010-01-01

An assessment with the Environment Rating Scales (ERS) is designed to give early childhood administrators and teaching staff much more than a set of quality scores. Appropriately used, an ERS assessment can provide a blueprint for planning and carrying out both immediate and long-range program improvements. Unfortunately, programs often complete…

Evidence Based Clinical Assessment of Child and Adolescent Social Phobia: A Critical Review of Rating Scales

ERIC Educational Resources Information Center

Tulbure, Bogdan T.; Szentagotai, Aurora; Dobrean, Anca; David, Daniel

2012-01-01

Investigating the empirical support of various assessment instruments, the evidence based assessment approach expands the scientific basis of psychotherapy. Starting from Hunsley and Mash's evaluative framework, we critically reviewed the rating scales designed to measure social anxiety or phobia in youth. Thirteen of the most researched social…

Absolute and Relative Reliability of Percentage of Syllables Stuttered and Severity Rating Scales

ERIC Educational Resources Information Center

Karimi, Hamid; O'Brian, Sue; Onslow, Mark; Jones, Mark

2014-01-01

Purpose: Percentage of syllables stuttered (%SS) and severity rating (SR) scales are measures in common use to quantify stuttering severity and its changes during basic and clinical research conditions. However, their reliability has not been assessed with indices measuring both relative and absolute reliability. This study was designed to provide…

Assessing Quality of Program Environments for Children and Youth with Autism: Autism Program Environment Rating Scale (APERS)

ERIC Educational Resources Information Center

Odom, Samuel L.; Cox, Ann; Sideris, John; Hume, Kara A.; Hedges, Susan; Kucharczyk, Suzanne; Shaw, Evelyn; Boyd, Brian A.; Reszka, Stephanie; Neitzel, Jennifer

2018-01-01

The purpose of this study was to examine the psychometric properties of the "Autism Program Environment Rating Scale" ("APERS"), an instrument designed to assess quality of program environments for students with autism spectrum disorder. Data sets from two samples of public school programs that provided services to children and…

The Factor Structure and Sources of Variation Underlying the Social Learning Environment Rating Scales: Monograph 1.

ERIC Educational Resources Information Center

Warshow, Joyce P.; Bepko, Raymond A.

Seventeen intermediate level classes for the educable mentally retarded were involved in an investigation of the factor structure of the Social Learning Environment Rating Scale (SLERS), an instrument designed to quantify teacher-student behavior based on the Social Learning Curriculum (SLC). The 17 classes were observed implementing six…

Technical Analysis of the Disruptive Behavior Rating Scale--Second Edition--Teacher Version

ERIC Educational Resources Information Center

Erford, Bradley T.; Clark, Kelly

2011-01-01

The reliability and validity of scores on the Disruptive Behavior Rating Scale-second edition-teacher version (DBRS-II-T) was analyzed. The DBRS-II-T was designed to assess teacher observations of students referred for behavioral difficulties. The five-factor model fit the data poorly, but convergent and diagnostic validities were excellent.…

Optimal rates for phylogenetic inference and experimental design in the era of genome-scale datasets.

PubMed

Dornburg, Alex; Su, Zhuo; Townsend, Jeffrey P

2018-06-25

With the rise of genome- scale datasets there has been a call for increased data scrutiny and careful selection of loci appropriate for attempting the resolution of a phylogenetic problem. Such loci are desired to maximize phylogenetic information content while minimizing the risk of homoplasy. Theory posits the existence of characters that evolve under such an optimum rate, and efforts to determine optimal rates of inference have been a cornerstone of phylogenetic experimental design for over two decades. However, both theoretical and empirical investigations of optimal rates have varied dramatically in their conclusions: spanning no relationship to a tight relationship between the rate of change and phylogenetic utility. Here we synthesize these apparently contradictory views, demonstrating both empirical and theoretical conditions under which each is correct. We find that optimal rates of characters-not genes-are generally robust to most experimental design decisions. Moreover, consideration of site rate heterogeneity within a given locus is critical to accurate predictions of utility. Factors such as taxon sampling or the targeted number of characters providing support for a topology are additionally critical to the predictions of phylogenetic utility based on the rate of character change. Further, optimality of rates and predictions of phylogenetic utility are not equivalent, demonstrating the need for further development of comprehensive theory of phylogenetic experimental design.

Comparison of Rating Scales in the Development of Patient-Reported Outcome Measures for Children with Eye Disorders.

PubMed

Hatt, Sarah R; Leske, David A; Wernimont, Suzanne M; Birch, Eileen E; Holmes, Jonathan M

2017-03-01

A rating scale is a critical component of patient-reported outcome instrument design, but the optimal rating scale format for pediatric use has not been investigated. We compared rating scale performance when administering potential questionnaire items to children with eye disorders and their parents. Three commonly used rating scales were evaluated: frequency (never, sometimes, often, always), severity (not at all, a little, some, a lot), and difficulty (not difficult, a little difficult, difficult, very difficult). Ten patient-derived items were formatted for each rating scale, and rating scale testing order was randomized. Both child and parent were asked to comment on any problems with, or a preference for, a particular scale. Any confusion about options or inability to answer was recorded. Twenty-one children, aged 5-17 years, with strabismus, amblyopia, or refractive error were recruited, each with one of their parents. Of the first 10 children, 4 (40%) had problems using the difficulty scale, compared with 1 (10%) using frequency, and none using severity. The difficulty scale was modified, replacing the word "difficult" with "hard." Eleven additional children (plus parents) then completed all 3 questionnaires. No children had problems using any scale. Four (36%) parents had problems using the difficulty ("hard") scale and 1 (9%) with frequency. Regarding preference, 6 (55%) of 11 children and 5 (50%) of 10 parents preferred using the frequency scale. Children and parents found the frequency scale and question format to be the most easily understood. Children and parents also expressed preference for the frequency scale, compared with the difficulty and severity scales. We recommend frequency rating scales for patient-reported outcome measures in pediatric populations.

Self-esteem and self-efficacy as predictors of attrition in associate degree nursing students.

PubMed

Peterson-Graziose, Virginia; Bryer, Jennifer; Nikolaidou, Maria

2013-06-01

There is a serious and growing shortage of nurses in the United States, and the high rate of student attrition from nursing programs has further added to this problem. The challenge for schools of nursing is to recruit increased numbers of qualified candidates into their programs and to determine ways to decrease the rate of student attrition. The purpose of this study was to determine whether self-esteem, self-efficacy, and life stressors were significantly related to student attrition in first-semester associate degree nursing students. A descriptive correlational design and nonprobability convenience sample of first-semester associate degree nursing students was used. Data were gathered using the Rosenberg Self-Esteem Scale, the General Self-Efficacy Scale, and the Holmes and Rahe Social Readjustment Rating Scale. Findings indicated that self-esteem was significantly associated with student attrition. Results from this study provide the basis for targeted interventions designed to decrease student attrition rates in associate degree nursing programs. Copyright 2013, SLACK Incorporated.

[Development of a New Scale for Gauging Smartphone Dependence].

PubMed

Toda, Masahiro; Nishio, Nobuhiro; Takeshita, Tatsuya

2015-01-01

We designed a scale to gauge smartphone dependence and assessed its reliability and validity. A prototype self-rating smartphone-dependence scale was tested on 133 medical students who use smartphones more frequently than other devices to access web pages. Each response was scored on a Likert scale (0, 1, 2, 3), with higher scores indicating greater dependence. To select items for the final scale, exploratory factor analysis was conducted. On the basis of factor analysis results, we designed the Wakayama Smartphone-Dependence Scale (WSDS) comprising 21 items with 3 subscales: immersion in Internet communication; using a smartphone for extended periods of time and neglecting social obligations and other tasks; using a smartphone while doing something else and neglect of etiquette. Our analysis confirmed the validity of the different elements of the WSDS: the reliability coefficient (Cronbach's alpha) values of all subscales and total WSDS were from 0.79 to 0.83 and 0.88, respectively. These findings suggest that the WSDS is a useful tool for rating smartphone dependence.

Observing relationships in Finnish adoptive families: Oulu Family Rating Scale.

PubMed

Tienari, Pekka; Wynne, Lyman C; Sorri, Anneli; Lahti, Ilpo; Moring, Juha; Nieminen, Pentti; Joukamaa, Matti; Naarala, Mikko; Seitamaa, Markku; Wahlberg, Karl-Erik; Miettunen, Jouko

2005-01-01

Adoption studies were intended to separate genetic from environmental "causal" factors. In earlier adoption studies, psychiatric diagnostic labels for the adoptive parents were used as a proxy for the multiple dimensions of the family rearing environment. In the Finnish Adoption Study, research design provided the opportunity to study directly the adoptive family rearing environment. For this purpose 33 sub-scales were selected creating what we call Oulu Family Rating Scale (OPAS, Oulun PerheArviointiSkaala). In this paper, the manual for scoring of these sub-scales is presented.

Test Review: E. Schopler, M. E. Van Bourgondien, G. J. Wellman, & S. R. Love "Childhood Autism Rating Scale" (2nd Ed.). Los Angeles, CA--Western Psychological Services, 2010

ERIC Educational Resources Information Center

Vaughan, Chelsea A.

2011-01-01

The author reviews Childhood Autism Rating Scale-Second Edition (CARS2), a useful tool for supporting the diagnostic process and for forming intervention recommendations once a diagnosis has been made. CARS2 consists of three rating forms designed to identify symptoms associated with autism spectrum disorders (ASD). Published in 2010, the CARS2…

Hierarchical population monitoring of greater sage-grouse (Centrocercus urophasianus) in Nevada and California—Identifying populations for management at the appropriate spatial scale

USGS Publications Warehouse

Coates, Peter S.; Prochazka, Brian G.; Ricca, Mark A.; Wann, Gregory T.; Aldridge, Cameron L.; Hanser, Steven E.; Doherty, Kevin E.; O'Donnell, Michael S.; Edmunds, David R.; Espinosa, Shawn P.

2017-08-10

Population ecologists have long recognized the importance of ecological scale in understanding processes that guide observed demographic patterns for wildlife species. However, directly incorporating spatial and temporal scale into monitoring strategies that detect whether trajectories are driven by local or regional factors is challenging and rarely implemented. Identifying the appropriate scale is critical to the development of management actions that can attenuate or reverse population declines. We describe a novel example of a monitoring framework for estimating annual rates of population change for greater sage-grouse (Centrocercus urophasianus) within a hierarchical and spatially nested structure. Specifically, we conducted Bayesian analyses on a 17-year dataset (2000–2016) of lek counts in Nevada and northeastern California to estimate annual rates of population change, and compared trends across nested spatial scales. We identified leks and larger scale populations in immediate need of management, based on the occurrence of two criteria: (1) crossing of a destabilizing threshold designed to identify significant rates of population decline at a particular nested scale; and (2) crossing of decoupling thresholds designed to identify rates of population decline at smaller scales that decouple from rates of population change at a larger spatial scale. This approach establishes how declines affected by local disturbances can be separated from those operating at larger scales (for example, broad-scale wildfire and region-wide drought). Given the threshold output from our analysis, this adaptive management framework can be implemented readily and annually to facilitate responsive and effective actions for sage-grouse populations in the Great Basin. The rules of the framework can also be modified to identify populations responding positively to management action or demonstrating strong resilience to disturbance. Similar hierarchical approaches might be beneficial for other species occupying landscapes with heterogeneous disturbance and climatic regimes.

Using Generalizability Theory to Examine the Dependability of Scores from the Learning Target Rating Scale

ERIC Educational Resources Information Center

McLaughlin, Tara W.; Snyder, Patricia A.; Algina, James

2017-01-01

The Learning Target Rating Scale (LTRS) is a measure designed to evaluate the quality of teacher-developed learning targets for embedded instruction for early learning. In the present study, we examined the measurement dependability of LTRS scores by conducting a generalizability study (G-study). We used a partially nested, three-facet model to…

Measurement of Latent Variables with Different Rating Scales: Testing Reliability and Measurement Equivalence by Varying the Verbalization and Number of Categories

ERIC Educational Resources Information Center

Menold, Natalja; Tausch, Anja

2016-01-01

Effects of rating scale forms on cross-sectional reliability and measurement equivalence were investigated. A randomized experimental design was implemented, varying category labels and number of categories. The participants were 800 students at two German universities. In contrast to previous research, reliability assessment method was used,…

Concurrent Validity and Sensitivity to Change of Direct Behavior Rating Single-Item Scales (DBR-SIS) within an Elementary Sample

ERIC Educational Resources Information Center

Smith, Rhonda L.; Eklund, Katie; Kilgus, Stephen P.

2018-01-01

The purpose of this study was to evaluate the concurrent validity, sensitivity to change, and teacher acceptability of Direct Behavior Rating single-item scales (DBR-SIS), a brief progress monitoring measure designed to assess student behavioral change in response to intervention. Twenty-four elementary teacher-student dyads implemented a daily…

A Comparison of Rubrics and Graded Category Rating Scales with Various Methods Regarding Raters' Reliability

ERIC Educational Resources Information Center

Dogan, C. Deha; Uluman, Müge

2017-01-01

The aim of this study was to determine the extent at which graded-category rating scales and rubrics contribute to inter-rater reliability. The research was designed as a correlational study. Study group consisted of 82 students attending sixth grade and three writing course teachers in a private elementary school. A performance task was…

Value-Eroding Teacher Behaviors Scale: A Validity and Reliability Study

ERIC Educational Resources Information Center

Arseven, Zeynep; Kiliç, Abdurrahman; Sahin, Seyma

2016-01-01

In the present study, it is aimed to develop a valid and reliable scale for determining value-eroding behaviors of teachers, hence their values of judgment. The items of the "Value-eroding Teacher Behaviors Scale" were designed in the form of 5-point likert type rating scale. The exploratory factor analysis (EFA) was conducted to…

Reliability, construct validity, and responsiveness of the neck disability index, patient-specific functional scale, and numeric pain rating scale in patients with cervical radiculopathy.

PubMed

Young, Ian A; Cleland, Joshua A; Michener, Lori A; Brown, Chris

2010-10-01

To examine the psychometric properties of the Neck Disability Index, Patient-Specific Functional Scale, and the Numeric Pain Rating Scale in a cohort of patients with cervical radiculopathy. A single-group repeated-measures design. Patients (n = 165) presenting to physical therapy with cervical radiculopathy completed the Neck Disability Index, Patient-Specific Functional Scale, and Numeric Pain Rating Scale at the baseline examination and at a follow-up. At the time of follow-up, all patients also completed the Global Rating of Change, which was used to dichotomize patients as improved or stable. Baseline and follow-up scores were used to determine the test-retest reliability, construct validity, and minimal levels of detectable and clinically important change for the Neck Disability Index, Patient-Specific Functional Scale, and Numeric Pain Rating Scale. Both the Neck Disability Index and Numeric Pain Rating Scale exhibited fair test-retest reliability, whereas the Patient-Specific Functional Scale exhibited poor reliability in patients with cervical radiculopathy. All three outcome measures showed adequate responsiveness in this patient population. The minimal detectable change was 13.4 for the Neck Disability Index, 3.3 for the Patient-Specific Functional Scale, and 4.1 for the Numeric Pain Rating Scale. The threshold for the minimal clinically important difference was 8.5 for the Neck Disability Index and 2.2 for both the Patient-Specific Functional Scale and Numeric Pain Rating Scale. In light of the varied distribution of symptoms in patients with cervical radiculopathy, future studies should investigate the psychometric properties of other neck-related disability measures in this patient population.

Utility of numerical and visual analog scales for evaluating the post-operative pain in rural patients

PubMed Central

Mudgalkar, Nikhil; Bele, Samir D; Valsangkar, Sameer; Bodhare, Trupti N; Gorre, Mahipal

2012-01-01

Background: Visual analog scales (VAS) and numeric analog scales (NAS) are used to assess post-operative pain, but few studies indicate their usefulness in rural illiterate population in India. Aims: This study was designed to 1) Compare the impact of literacy on the ability to indicate pain rating on VAS and NAS in post-operative rural patients. 2) Assess the level of agreement between the pain scales. Setting and Design: Cross sectional, hospital based study. Methods: Informed consent was obtained from patients prior to undergoing surgical procedures in a teaching hospital. Post surgery, patients who were conscious and coherent, were asked to rate pain on both VAS and NAS. The pain ratings were obtained within 24 hours of surgery and within 5 minutes of each other. Statistical Methods: Percentages, chi square test, regression analysis. Results: A total of 105 patients participated in the study. 43 (41%) of the sample was illiterate. 82 (78.1%) were able to rate pain on VAS while 81 (77.1%) were able to rate pain on NAS. There was no significant association between pain ratings and type of surgery, duration of surgery and nature of anaesthesia. In multivariate analysis, age, sex and literacy had no significant association with the ability to rate pain on VAS (P value 0.652, 0.967, 0.328 respectively). Similarly, no significant association was obtained between age, sex and literacy and ability to rate pain on NAS (P value 0.713, 0.405, 0.875 respectively). Correlation coefficient between the scales was 0.693. Conclusion: VAS and NAS can be used interchangeably in Indian rural population as post-operative pain assessment tools irrespective of literacy status. PMID:23325940

Ares I Scale Model Acoustic Test Above Deck Water Sound Suppression Results

NASA Technical Reports Server (NTRS)

Counter, Douglas D.; Houston, Janice D.

2011-01-01

The Ares I Scale Model Acoustic Test (ASMAT) program test matrix was designed to determine the acoustic reduction for the Liftoff acoustics (LOA) environment with an above deck water sound suppression system. The scale model test can be used to quantify the effectiveness of the water suppression system as well as optimize the systems necessary for the LOA noise reduction. Several water flow rates were tested to determine which rate provides the greatest acoustic reductions. Preliminary results are presented.

Analysis of BJ493 diesel engine lubrication system properties

NASA Astrophysics Data System (ADS)

Liu, F.

2017-12-01

The BJ493ZLQ4A diesel engine design is based on the primary model of BJ493ZLQ3, of which exhaust level is upgraded to the National GB5 standard due to the improved design of combustion and injection systems. Given the above changes in the diesel lubrication system, its improved properties are analyzed in this paper. According to the structures, technical parameters and indices of the lubrication system, the lubrication system model of BJ493ZLQ4A diesel engine was constructed using the Flowmaster flow simulation software. The properties of the diesel engine lubrication system, such as the oil flow rate and pressure at different rotational speeds were analyzed for the schemes involving large- and small-scale oil filters. The calculated values of the main oil channel pressure are in good agreement with the experimental results, which verifies the proposed model feasibility. The calculation results show that the main oil channel pressure and maximum oil flow rate values for the large-scale oil filter scheme satisfy the design requirements, while the small-scale scheme yields too low main oil channel’s pressure and too high. Therefore, application of small-scale oil filters is hazardous, and the large-scale scheme is recommended.

Just-About-Right and ideal scaling provide similar insights into the influence of sensory attributes on liking.

PubMed

Li, Bangde; Hayes, John E; Ziegler, Gregory R

2014-10-01

Just-about-right (JAR) scaling is criticized for measuring attribute intensity and acceptability simultaneously. Using JAR scaling, an attribute is evaluated for its appropriateness relative to one's hypothetical ideal level that is pre-defined at the middle of a continuum. Alternatively, ideal scaling measures these two constructs separately. Ideal scaling allows participants to rate their ideal freely on the scale (i.e., without assuming the "Too Little" and "Too Much" regions are equal in size). We hypothesized that constraining participants' ideal to the center point, as is done in the JAR scale, may cause a scaling bias and, thereby, influence the magnitude of "Too Little" and "Too Much". Furthermore, we hypothesized that the magnitude of "Too Little" and "Too Much" would influence liking to different extents. Coffee-flavored dairy beverages (n=20) were formulated using a fractional, constrained-mixture design that varied the ratio of water, milk, coffee extract, and sucrose. Participants tasted 4 of 20 prototypes that were served in a monadic sequential order using a balanced incomplete block design. Data reported here are for participants randomly assigned to one of two research conditions: ideal scaling (n=129) or JAR scaling (n=132). For both conditions, participants rated overall liking using a 9-point hedonic scale. Four attributes ( sweetness, milk flavor, coffee flavor and thickness ) were evaluated. The reliability of an individual participant's ideal rating for an attribute was evaluated using the standard deviation of their ideal ratings (n=4). All data from a participant were eliminated from further analyses when his/her standard deviation of the ideal ratings for any of the four rated attributes was identified as a statistical outlier. This resulted in the elimination of 15 of 129 (12 %) of participants in the ideal scaling group. Multiple linear regression was employed to model liking as a function of "Too Little" or "Too Much" attribute intensities. Mean ideal ratings (averaged across participants) for all four attributes were significantly different from the central point of the scale (i.e., 50). However, Coffee flavor was the only attribute for which the mean ideal rating (57.2) fell outside the central 10% (45.0-55.0). Even so, the magnitude of "Too Little" and "Too Much" was not affected by the scaling method. The influence of the magnitude of "Too Little" and "Too Much" on liking was asymmetrical. Both scaling methods agreed that sweetness and coffee flavor were the main sensory attributes affecting liking . Overall, JAR scaling and ideal scaling were comparable for measuring "Too Little" and "Too Much", and identifying the main factors affecting liking.

Just-About-Right and ideal scaling provide similar insights into the influence of sensory attributes on liking

PubMed Central

Li, Bangde; Hayes, John E.; Ziegler, Gregory R.

2014-01-01

Just-about-right (JAR) scaling is criticized for measuring attribute intensity and acceptability simultaneously. Using JAR scaling, an attribute is evaluated for its appropriateness relative to one’s hypothetical ideal level that is pre-defined at the middle of a continuum. Alternatively, ideal scaling measures these two constructs separately. Ideal scaling allows participants to rate their ideal freely on the scale (i.e., without assuming the “Too Little” and “Too Much” regions are equal in size). We hypothesized that constraining participants’ ideal to the center point, as is done in the JAR scale, may cause a scaling bias and, thereby, influence the magnitude of “Too Little” and “Too Much”. Furthermore, we hypothesized that the magnitude of “Too Little” and “Too Much” would influence liking to different extents. Coffee-flavored dairy beverages (n=20) were formulated using a fractional, constrained-mixture design that varied the ratio of water, milk, coffee extract, and sucrose. Participants tasted 4 of 20 prototypes that were served in a monadic sequential order using a balanced incomplete block design. Data reported here are for participants randomly assigned to one of two research conditions: ideal scaling (n=129) or JAR scaling (n=132). For both conditions, participants rated overall liking using a 9-point hedonic scale. Four attributes (sweetness, milk flavor, coffee flavor and thickness) were evaluated. The reliability of an individual participant’s ideal rating for an attribute was evaluated using the standard deviation of their ideal ratings (n=4). All data from a participant were eliminated from further analyses when his/her standard deviation of the ideal ratings for any of the four rated attributes was identified as a statistical outlier. This resulted in the elimination of 15 of 129 (12 %) of participants in the ideal scaling group. Multiple linear regression was employed to model liking as a function of “Too Little” or “Too Much” attribute intensities. Mean ideal ratings (averaged across participants) for all four attributes were significantly different from the central point of the scale (i.e., 50). However, Coffee flavor was the only attribute for which the mean ideal rating (57.2) fell outside the central 10% (45.0–55.0). Even so, the magnitude of “Too Little” and “Too Much” was not affected by the scaling method. The influence of the magnitude of “Too Little” and “Too Much” on liking was asymmetrical. Both scaling methods agreed that sweetness and coffee flavor were the main sensory attributes affecting liking. Overall, JAR scaling and ideal scaling were comparable for measuring “Too Little” and “Too Much”, and identifying the main factors affecting liking. PMID:25061258

Divergent Activities in History Teaching: History Teachers' Perceptions and an Initiative for Evaluation as Preparing Rating Scale

ERIC Educational Resources Information Center

Tokdemir, Muhammet Ahmet

2017-01-01

Assessment is one of the basic elements of teaching. However, there are not enough studies on the evaluation of divergent questions, particularly, in history education. Therefore, after reviewing the past and current literature on the topic, this study describes the design and implementation of a rating scale which can be used in the evaluation of…

Dependability and Treatment Sensitivity of Multi-Item Direct Behavior Rating Scales for Interpersonal Peer Conflict

ERIC Educational Resources Information Center

Daniels, Brian; Volpe, Robert J.; Briesch, Amy M.; Gadow, Kenneth D.

2017-01-01

Direct behavior rating (DBR) represents a feasible method for monitoring student behavior in the classroom; however, limited work to date has focused on the use of multi-item scales. The purposes of the study were to examine the (a) dependability of data obtained from a multi-item DBR designed to assess peer conflict and (b) treatment sensitivity…

A Test Review: Gilliam, J. E. (2014). "Gilliam Autism Rating Scale-Third Edition (GARS-3)." Austin, TX: Pro-Ed

ERIC Educational Resources Information Center

Karren, Benjamin C.

2017-01-01

The Gilliam Autism Rating Scale-Third Edition (GARS-3) is a norm-referenced tool designed to screen for autism spectrum disorders (ASD) in individuals between the ages of 3 and 22 (Gilliam, 2014). The GARS-3 test kit consists of three different components and includes an "Examiner's Manual," summary/response forms (50), and the…

Clinical Utilisation and Usefullness of the Rating Scale of Mixed States, ("Gt-Msrs"): a Multicenter Study.

PubMed

Tavormina, Giuseppe; Franza, Francesco; Stranieri, Giuseppe; Juli, Luigi; Juli, Maria Rosaria

2017-09-01

The rating scale "G.T. MSRS" has been designed to improve the clinical effectiveness of the clinician psychiatrists, by enabling them to make an early "general" diagnosis of mixed states. The knowledge of the clinical features of the mixed states and of the symptoms of the "mixity" of mood disorders is crucial: to mis-diagnose or mis-treat patients with these symptoms may increase the suicide risk and make worse the evolution of mood disorders going to the dysphoric state. This study is the second validation study of the "G.T. MSRS" rating scale, in order to demonstrate its usefullness.

Pressure Decay Testing Methodology for Quantifying Leak Rates of Full-Scale Docking System Seals

NASA Technical Reports Server (NTRS)

Dunlap, Patrick H., Jr.; Daniels, Christopher C.; Wasowski, Janice L.; Garafolo, Nicholas G.; Penney, Nicholas; Steinetz, Bruce M.

2010-01-01

NASA is developing a new docking system to support future space exploration missions to low-Earth orbit and the Moon. This system, called the Low Impact Docking System, is a mechanism designed to connect the Orion Crew Exploration Vehicle to the International Space Station, the lunar lander (Altair), and other future Constellation Project vehicles. NASA Glenn Research Center is playing a key role in developing the main interface seal for this docking system. This seal will be relatively large with an outside diameter in the range of 54 to 58 in. (137 to 147 cm). As part of this effort, a new test apparatus has been designed, fabricated, and installed to measure leak rates of candidate full-scale seals under simulated thermal, vacuum, and engagement conditions. Using this test apparatus, a pressure decay testing and data processing methodology has been developed to quantify full-scale seal leak rates. Tests performed on untreated 54 in. diameter seals at room temperature in a fully compressed state resulted in leak rates lower than the requirement of less than 0.0025 lbm, air per day (0.0011 kg/day).

Assessing the applicability of the 1D flux theory to full-scale secondary settling tank design with a 2D hydrodynamic model.

PubMed

Ekama, G A; Marais, P

2004-02-01

The applicability of the one-dimensional idealized flux theory (1DFT) for the design of secondary settling tanks (SSTs) is evaluated by comparing its predicted maximum surface overflow (SOR) and solids loading (SLR) rates with that calculated with the two-dimensional computational fluid dynamics model SettlerCAD using as a basis 35 full-scale SST stress tests conducted on different SSTs with diameters from 30 to 45m and 2.25-4.1m side water depth (SWD), with and without Stamford baffles. From the simulations, a relatively consistent pattern appeared, i.e. that the 1DFT can be used for design but its predicted maximum SLR needs to be reduced by an appropriate flux rating, the magnitude of which depends mainly on SST depth and hydraulic loading rate (HLR). Simulations of the Watts et al. (Water Res. 30(9)(1996)2112) SST, with doubled SWDs and the Darvill new (4.1m) and old (2.5m) SSTs with interchanged depths, were run to confirm the sensitivity of the flux rating to depth and HLR. Simulations with and without a Stamford baffle were also performed. While the design of the internal features of the SST, such as baffling, has a marked influence on the effluent SS concentration while the SST is underloaded, these features appeared to have only a small influence on the flux rating, i.e. capacity, of the SST. Until more information is obtained, it would appear from the simulations that the flux rating of 0.80 of the 1DFT maximum SLR recommended by Ekama and Marais (Water Pollut. Control 85(1)(1986)101) remains a reasonable value to apply in the design of full-scale SSTs-for deep SSTs (4m SWD) the flux rating could be increased to 0.85 and for shallow SSTs (2.5m SWD) decreased to 0.75. It is recommended that (i) while the apparent interrelationship between SST flux rating and depth suggests some optimization of the volume of the SST, this be avoided and (ii) the depth of the SST be designed independently of the surface area as is usually the practice and once selected, the appropriate flux rating applied to the 1DFT estimate of the surface area.

Rating disease progression of Friedreich’s ataxia by the International Cooperative Ataxia Rating Scale: analysis of a 603-patient database

PubMed Central

Coppard, Nicholas; Cooper, Jonathon M.; Delatycki, Martin B.; Dürr, Alexandra; Di Prospero, Nicholas A.; Giunti, Paola; Lynch, David R.; Schulz, J. B.; Rummey, Christian; Meier, Thomas

2013-01-01

The aim of this cross-sectional study was to analyse disease progression in Friedreich’s ataxia as measured by the International Cooperative Ataxia Rating Scale. Single ratings from 603 patients with Friedreich’s ataxia were analysed as a function of disease duration, age of onset and GAA repeat lengths. The relative contribution of items and subscales to the total score was studied as a function of disease progression. In addition, the scaling properties were assessed using standard statistical measures. Average total scale progression per year depends on the age of disease onset, the time since diagnosis and the GAA repeat length. The age of onset inversely correlates with increased GAA repeat length. For patients with an age of onset ≤14 years associated with a longer repeat length, the average yearly rate of decline was 2.5 ± 0.18 points in the total International Cooperative Ataxia Rating Scale for the first 20 years of disease duration, whereas patients with a later onset progress more slowly (1.8 ± 0.27 points/year). Ceiling effects in posture, gait and lower limb scale items lead to a reduced sensitivity of the scale in the severely affected population with a total score of >60 points. Psychometric scaling analysis shows generally favourable properties for the total scale, but the subscale grouping could be improved. This cross-sectional study provides a detailed characterization of the International Cooperative Ataxia Rating Scale. The analysis further provides rates of change separated for patients with early and late disease onset, which is driven by the GAA repeat length. Differences in the subscale dynamics merit consideration in the design of future clinical trials applying this scale as a neurological assessment instrument in Friedreich’s ataxia. PMID:23365101

In-Flight Validation of a Pilot Rating Scale for Evaluating Failure Transients in Electronic Flight Control Systems

NASA Technical Reports Server (NTRS)

Kalinowski, Kevin F.; Tucker, George E.; Moralez, Ernesto, III

2006-01-01

Engineering development and qualification of a Research Flight Control System (RFCS) for the Rotorcraft Aircrew Systems Concepts Airborne Laboratory (RASCAL) JUH-60A has motivated the development of a pilot rating scale for evaluating failure transients in fly-by-wire flight control systems. The RASCAL RFCS includes a highly-reliable, dual-channel Servo Control Unit (SCU) to command and monitor the performance of the fly-by-wire actuators and protect against the effects of erroneous commands from the flexible, but single-thread Flight Control Computer. During the design phase of the RFCS, two piloted simulations were conducted on the Ames Research Center Vertical Motion Simulator (VMS) to help define the required performance characteristics of the safety monitoring algorithms in the SCU. Simulated failures, including hard-over and slow-over commands, were injected into the command path, and the aircraft response and safety monitor performance were evaluated. A subjective Failure/Recovery Rating (F/RR) scale was developed as a means of quantifying the effects of the injected failures on the aircraft state and the degree of pilot effort required to safely recover the aircraft. A brief evaluation of the rating scale was also conducted on the Army/NASA CH-47B variable stability helicopter to confirm that the rating scale was likely to be equally applicable to in-flight evaluations. Following the initial research flight qualification of the RFCS in 2002, a flight test effort was begun to validate the performance of the safety monitors and to validate their design for the safe conduct of research flight testing. Simulated failures were injected into the SCU, and the F/RR scale was applied to assess the results. The results validate the performance of the monitors, and indicate that the Failure/Recovery Rating scale is a very useful tool for evaluating failure transients in fly-by-wire flight control systems.

Gravo-Aeroelastic Scaling for Extreme-Scale Wind Turbines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fingersh, Lee J; Loth, Eric; Kaminski, Meghan

2017-06-09

A scaling methodology is described in the present paper for extreme-scale wind turbines (rated at 10 MW or more) that allow their sub-scale turbines to capture their key blade dynamics and aeroelastic deflections. For extreme-scale turbines, such deflections and dynamics can be substantial and are primarily driven by centrifugal, thrust and gravity forces as well as the net torque. Each of these are in turn a function of various wind conditions, including turbulence levels that cause shear, veer, and gust loads. The 13.2 MW rated SNL100-03 rotor design, having a blade length of 100-meters, is herein scaled to the CART3more » wind turbine at NREL using 25% geometric scaling and blade mass and wind speed scaled by gravo-aeroelastic constraints. In order to mimic the ultralight structure on the advanced concept extreme-scale design the scaling results indicate that the gravo-aeroelastically scaled blades for the CART3 are be three times lighter and 25% longer than the current CART3 blades. A benefit of this scaling approach is that the scaled wind speeds needed for testing are reduced (in this case by a factor of two), allowing testing under extreme gust conditions to be much more easily achieved. Most importantly, this scaling approach can investigate extreme-scale concepts including dynamic behaviors and aeroelastic deflections (including flutter) at an extremely small fraction of the full-scale cost.« less

If You've Got It, Use It (Simulation, That Is...)

NASA Technical Reports Server (NTRS)

Frost, Chad; Tucker, George

2006-01-01

This viewgraph presentation reviews the Rotorcraft Aircrew Systems Concept Airborne Laboratory (RASCAL) UH-60 in-flight simulator, the use of simulation in support of safety monitor design specification development, the development of a failure/recovery (F/R) rating scale, the use of F/R Rating Scale as a common element between simulation and flight evaluation, and the expansion of the flight envelope without benefit of simulation.

Development of an advanced anaerobic digester design and a kinetic model for biogasification of water hyacinth/sludge blends

DOE Office of Scientific and Technical Information (OSTI.GOV)

Srivastava, V.; Fannin, K.F.; Biljetina, R.

1986-07-01

The Institute of Gas Technology (IGT) conducted a comprehensive laboratory-scale research program to develop and optimize the anaerobic digestion process for producing methane from water hyacinth and sludge blends. This study focused on digester design and operating techniques, which gave improved methane yields and production rates over those observed using conventional digesters. The final digester concept and the operating experience was utilized to design and operate a large-scale experimentla test unit (ETU) at Walt Disney World, Florida. This paper describes the novel digester design, operating techniques, and the results obtained in the laboratory. The paper also discusses a kinetic modelmore » which predicts methane yield, methane production rate, and digester effluent solids as a function of retention time. This model was successfully utilized to predict the performance of the ETU. 15 refs., 6 figs., 6 tabs.« less

Measuring hunger and satiety in primary school children. Validation of a new picture rating scale.

PubMed

Bennett, Carmel; Blissett, Jackie

2014-07-01

Measuring hunger and satiety in children is essential to many studies of childhood eating behaviour. Few validated measures currently exist that allow children to make accurate and reliable ratings of hunger/satiety. Three studies aimed to validate the use of a new categorical rating scale in the context of estimated and real eating episodes. Forty-seven 6- to 8-year-olds participated in Study 1, which used a between-participant design. Results indicated that the majority of children were able to make estimated hunger/satiety ratings for a story character using the scale. No significant differences in the ratings of hunger/satiety of children measured before and after lunch were observed and likely causes are discussed. To account for inter-individual differences in hunger/satiety perceptions Study 2 employed a within-participant design. Fifty-four 5- to 7-year-olds participated and made estimated hunger/satiety ratings for a story character and real hunger/satiety ratings before and after lunch. The results indicated that the majority of children were able to use the scale to make estimated and real hunger and satiety ratings. Children were found to be significantly hungrier before compared to after lunch. As it was not possible to establish the types and quantities of food children ate for lunch a third study was carried out in a controlled laboratory environment. Thirty-six 6- to 9-year-olds participated in Study 3 and made hunger/satiety ratings before and after ingesting an ad libitum snack of known composition and quantity. Results indicated that children felt hungrier before than after the snack and that pre-snack hunger/satiety, and changes in hunger/satiety, were associated with snack intake. Overall, the studies indicate that the scale has potential for use with primary school children. Implications of the findings are discussed. Copyright © 2014 Elsevier Ltd. All rights reserved.

Bench scale demonstration and conceptual engineering for DETOX{sup SM} catalyzed wet oxidation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moslander, J.; Bell, R.; Robertson, D.

1994-06-01

Laboratory and bench scale studies of the DETOX{sup SM} catalyzed wet oxidation process have been performed with the object of developing the process for treatment of hazardous and mixed wastes. Reaction orders, apparent rates, and activation energies have been determined for a range of organic waste surrogates. Reaction intermediates and products have been analyzed. Metals` fates have been determined. Bench scale units have been designed, fabricated, and tested with solid and liquid organic waste surrogates. Results from the laboratory and bench scale studies have been used to develop conceptual designs for application of the process to hazardous and mixed wastes.

Room temperature stretch forming of scale space shuttle external tank dome gores. Volume 1: Technical

NASA Technical Reports Server (NTRS)

Blunck, R. D.; Krantz, D. E.

1974-01-01

An account of activities and data gathered in the Room Temperature Stretch Forming of One-third Scale External Tank Bulkhead Gores for space shuttle study, and a tooling design and production cost study are reported. The following study phases are described: (1) the stretch forming of three approximately one-third scale external tank dome gores from single sheets of 2219-T37 aluminum alloy; (2) the designing of a full scale production die, including a determination of tooling requirements; and (3) the determination of cost per gore at the required production rates, including manufacturing, packaging, and shipping.

Test Review: Children's Psychological Processing Scale (CPPS)

ERIC Educational Resources Information Center

McGill, Ryan J.

2013-01-01

The Children's Psychological Processing Scale (CPPS), authored by Milton J. Dehn and published by Schoolhouse Educational Services in 2012, is a third-party rating scale that can be administered to teachers who are familiar with children ages 5 to 12. The measure is designed to identify psychological processing deficits in children who are…

Material Recycling and Waste Minimization by Freeze Crystallization. Phase 1

DTIC Science & Technology

1995-05-01

or centrifuge for recovery. DESIGN PARAMETERS - Crystallizer Gives direct scale-up information. - Eutectic Salt Separation Gives direct scale-up...because of sfer rates and crystal kinetics, differences in crystallizer construction. - Eutectic Salt Separation No ability in this system. - Wash Columns

Choice of rating scale labels: implication for minimizing patient satisfaction response ceiling effect in telemedicine surveys.

PubMed

Masino, Caterina; Lam, Tony C M

2014-12-01

Lack of response variability is problematic in surveys because of its detrimental effects on sensitivity and consequently reliability of the responses. In satisfaction surveys, this problem is caused by the ceiling effect resulting from high satisfaction ratings. A potential solution strategy is to manipulate the labels of the rating scale to create greater discrimination of responses on the high end of the response continuum. This study examined the effects of a positive-centered scale on the distribution and reliability of telemedicine satisfaction responses in a highly positive respondent population. In total, 216 telemedicine participants were randomly assigned to one of three experimental conditions as defined by the form of Likert scale: (1) 5-point Balanced Equal-Interval, (2) 5-point Positive-Packed, and (3) 5-point Positive-Centered Equal-Interval. Although the study findings were not statistically significant, partially because of sample size, the distribution and internal consistency reliability of responses occurred in the direction hypothesized. Loading the rating scale with more positive labels appears to be a useful strategy for reducing the ceiling effect and increases the discrimination ability of survey responses. The current research provides a survey design strategy to minimize ceiling effects. Although the findings provide some evidence suggesting the benefit of using rating scales loaded with positive labels, more research is needed to confirm this, as well as extend it to examine other types of rating scales and the interaction between rating scale formats and respondent characteristics.

Integral Design Methodology of Photocatalytic Reactors for Air Pollution Remediation.

PubMed

Passalía, Claudio; Alfano, Orlando M; Brandi, Rodolfo J

2017-06-07

An integral reactor design methodology was developed to address the optimal design of photocatalytic wall reactors to be used in air pollution control. For a target pollutant to be eliminated from an air stream, the proposed methodology is initiated with a mechanistic derived reaction rate. The determination of intrinsic kinetic parameters is associated with the use of a simple geometry laboratory scale reactor, operation under kinetic control and a uniform incident radiation flux, which allows computing the local superficial rate of photon absorption. Thus, a simple model can describe the mass balance and a solution may be obtained. The kinetic parameters may be estimated by the combination of the mathematical model and the experimental results. The validated intrinsic kinetics obtained may be directly used in the scaling-up of any reactor configuration and size. The bench scale reactor may require the use of complex computational software to obtain the fields of velocity, radiation absorption and species concentration. The complete methodology was successfully applied to the elimination of airborne formaldehyde. The kinetic parameters were determined in a flat plate reactor, whilst a bench scale corrugated wall reactor was used to illustrate the scaling-up methodology. In addition, an optimal folding angle of the corrugated reactor was found using computational fluid dynamics tools.

Minimum impulse thruster valve design and development

NASA Technical Reports Server (NTRS)

Huftalen, Richard L.; Platt, Andrea L.; Parker, Morgan J.; Yankura, George A.

2003-01-01

The design and development of a minimum impulse thruster valve was conducted, by Moog, under contract by NASA's Jet Propulsion Laboratory, California Institute of Technology, for deep space propulsion systems. The effort was focused on applying known solenoid design techniques scaled to provide a 1 -millisecond response capability for monopropellant, hydrazine ACS thruster applications. The valve has an extended operating temperature range of 20(deg)F to +350(deg)F with a total mass of less than 25 grams and nominal power draw of 7 watts. The design solution resulted in providing a solenoid valve that is one-tenth the scale of the standard product line. The valve has the capability of providing a mass flow rate of 0.0009 pounds per second hydrazine. The design life of 1,000,000 cycles was demonstrated both dry and wet. Not all design factors scaled as expected and proved to be the focus of the final development effort. These included the surface interactions, hydrodynamics and driver electronics. The resulting solution applied matured design approaches to minimize the program risk with innovative methods to address the impacts of scale.

Specific Language Impairment and Executive Functioning: Parent and Teacher Ratings of Behavior

ERIC Educational Resources Information Center

Wittke, Kacie; Spaulding, Tammie J.; Schechtman, Calli J.

2013-01-01

Purpose: The current study used the Behavior Rating Inventory of Executive Function--Preschool Version (BRIEF-P; Gioia, Espy, & Isquith, 2003), a rating scale designed to investigate executive behaviors in everyday activities, to examine the executive functioning of preschool children with specific language impairment (SLI) relative to their…

Evaluating the Cognition, Behavior, and Social Profile of an Adolescent With Learning Disabilities and Assessing the Effectiveness of an Individualized Educational Program

PubMed Central

Tabitha Louis, Preeti; Arnold Emerson, Isaac

2014-01-01

Objective: The present study seeks to outline a holistic assessment method that was used in understanding problems experienced by an adolescent boy and in designing and implementing an individualized educational program. Methods: An adolescent child referred for concerns in learning was screened for learning disability using standardized inventories and test batteries. The Connors Parent and Teacher Rating Scales (short forms), Wechsler's Intelligence Scale for Children (WISC), the Vineland Social Maturity Scale (VSMS), and the Kinetic Family Drawing (KFD) test were used to assess the behavior, cognition, and social profile of the child. An individualized educational program was designed and this intervention was provided for 6 months by using parents as co-therapists. Participant and parent interview schedules were used in identifying underlying issues of concern. The child was reassessed 6 months after the intervention was provided. Results: Findings on the Connors Parent Rating Scale revealed scores that were greater than the 50th percentile on the domains of inattention and cognitive problems. On the Connors Teacher Rating Scale, we observed scores greater than the 50th percentile on the hyperactivity, cognitive problems, and the inattention domains. The WISC revealed that the child had a "Dull Normal" Intellectual functioning and there was also a deficit of 2 years on the social skills as tested by the Vineland Social Maturity Scale (VSMS). The Kinetic Family Drawing Test revealed negative emotions within the child. Post intervention, we noticed a remarkable improvement in the scores across all domains of behavior, social, and cognitive functioning. Conclusion: Designing an individualized education program that is tailored to the specific needs of the child and using parents as co-therapists proved to be an effective intervention. PMID:25053954

Control structures for high speed processors

NASA Technical Reports Server (NTRS)

Maki, G. K.; Mankin, R.; Owsley, P. A.; Kim, G. M.

1982-01-01

A special processor was designed to function as a Reed Solomon decoder with throughput data rate in the Mhz range. This data rate is significantly greater than is possible with conventional digital architectures. To achieve this rate, the processor design includes sequential, pipelined, distributed, and parallel processing. The processor was designed using a high level language register transfer language. The RTL can be used to describe how the different processes are implemented by the hardware. One problem of special interest was the development of dependent processes which are analogous to software subroutines. For greater flexibility, the RTL control structure was implemented in ROM. The special purpose hardware required approximately 1000 SSI and MSI components. The data rate throughput is 2.5 megabits/second. This data rate is achieved through the use of pipelined and distributed processing. This data rate can be compared with 800 kilobits/second in a recently proposed very large scale integration design of a Reed Solomon encoder.

What controls deposition rate in electron-beam chemical vapor deposition?

PubMed

White, William B; Rykaczewski, Konrad; Fedorov, Andrei G

2006-08-25

The key physical processes governing electron-beam-assisted chemical vapor deposition are analyzed via a combination of theoretical modeling and supporting experiments. The scaling laws that define growth of the nanoscale deposits are developed and verified using carefully designed experiments of carbon deposition from methane onto a silicon substrate. The results suggest that the chamber-scale continuous transport of the precursor gas is the rate controlling process in electron-beam chemical vapor deposition.

The Koukopoulos Mixed Depression Rating Scale (KMDRS): An International Mood Network (IMN) validation study of a new mixed mood rating scale.

PubMed

Sani, Gabriele; Vöhringer, Paul A; Barroilhet, Sergio A; Koukopoulos, Alexia E; Ghaemi, S Nassir

2018-05-01

It has been proposed that the broad major depressive disorder (MDD) construct is heterogenous. Koukopoulos has provided diagnostic criteria for an important subtype within that construct, "mixed depression" (MxD), which encompasses clinical pictures characterized by marked psychomotor or inner excitation and rage/anger, along with severe depression. This study provides psychometric validation for the first rating scale specifically designed to assess MxD symptoms cross-sectionally, the Koukopoulos Mixed Depression Rating Scale (KMDRS). 350 patients from the international mood network (IMN) completed three rating scales: the KMDRS, Montgomery-Asberg Depression Rating Scale (MADRS) and Young Mania Rating Scale (YMRS). KMDRS' psychometric properties assessed included Cronbach's alpha, inter-rater reliability, factor analysis, predictive validity, and Receiver Operator Curve analysis. Internal consistency (Cronbach's alpha = 0.76; 95% CI 0.57, 0.94) and interrater reliability (kappa = 0.73) were adequate. Confirmatory factor analysis identified 2 components: anger and psychomotor excitation (80% of total variance). Good predictive validity was seen (C-statistic = 0.82 95% CI 0.68, 0.93). Severity cut-off scores identified were as follows: none (0-4), possible (5-9), mild (10-15), moderate (16-20) and severe (> 21) MxD. Non DSM-based diagnosis of MxD may pose some difficulties in the initial use and interpretation of the scoring of the scale. Moreover, the cross-sectional nature of the evaluation does not verify the long-term stability of the scale. KMDRS was a reliable and valid instrument to assess MxD symptoms. Copyright © 2018 Elsevier B.V. All rights reserved.

Trickle-bed root culture bioreactor design and scale-up: growth, fluid-dynamics, and oxygen mass transfer.

PubMed

Ramakrishnan, Divakar; Curtis, Wayne R

2004-10-20

Trickle-bed root culture reactors are shown to achieve tissue concentrations as high as 36 g DW/L (752 g FW/L) at a scale of 14 L. Root growth rate in a 1.6-L reactor configuration with improved operational conditions is shown to be indistinguishable from the laboratory-scale benchmark, the shaker flask (mu=0.33 day(-1)). These results demonstrate that trickle-bed reactor systems can sustain tissue concentrations, growth rates and volumetric biomass productivities substantially higher than other reported bioreactor configurations. Mass transfer and fluid dynamics are characterized in trickle-bed root reactors to identify appropriate operating conditions and scale-up criteria. Root tissue respiration goes through a minimum with increasing liquid flow, which is qualitatively consistent with traditional trickle-bed performance. However, liquid hold-up is much higher than traditional trickle-beds and alternative correlations based on liquid hold-up per unit tissue mass are required to account for large changes in biomass volume fraction. Bioreactor characterization is sufficient to carry out preliminary design calculations that indicate scale-up feasibility to at least 10,000 liters.

Susceptibility of functional impairment scales to noncredible responses in the clinical evaluation of adult ADHD.

PubMed

Fuermaier, Anselm B M; Tucha, Oliver; Koerts, Janneke; Butzbach, Marah; Weisbrod, Matthias; Aschenbrenner, Steffen; Tucha, Lara

2018-05-01

A growing body of research questions the reliance of symptom self-reports in the clinical evaluation of attention-deficit/hyperactivity disorder (ADHD) in adulthood. A recent study suggested that also impairment reports are vulnerable to noncredible responses, as derived from a simulation design using a global functional impairment scale. The present study aims to add evidence to this issue, by using an ADHD specific impairment scale in a simulation design on large samples. Impairment ratings on the Weiss Functional Impairment Rating Scale (WFIRS) of 62 patients with ADHD were compared to 142 healthy individuals who were instructed to show normal behavior. Furthermore, impairment ratings of patients with ADHD were compared to ratings of 330 healthy individuals who were randomly assigned to one of four simulation conditions that were instructed to complete the scale as if they had ADHD. Patients with ADHD reported higher levels of impairment than the healthy control group in all domains of life. Furthermore, individuals instructed to feign ADHD indicated higher levels of impairments in most domains of life compared to control participants and genuine patients with ADHD. The group differences between individuals feigning ADHD and individuals with genuine ADHD, however, were only small to moderate. Further analyses revealed that the WFRIS was not useful to successfully differentiate genuine from feigned ADHD. The present study confirms the conclusion that self-reported impairments are susceptible to noncredible responses and should be used with caution in the clinical evaluation of adult ADHD.

[Instruments for quantitative methods of nursing research].

PubMed

Vellone, E

2000-01-01

Instruments for quantitative nursing research are a mean to objectify and measure a variable or a phenomenon in the scientific research. There are direct instruments to measure concrete variables and indirect instruments to measure abstract concepts (Burns, Grove, 1997). Indirect instruments measure the attributes by which a concept is made of. Furthermore, there are instruments for physiologic variables (e.g. for the weight), observational instruments (Check-lists e Rating Scales), interviews, questionnaires, diaries and the scales (Check-lists, Rating Scales, Likert Scales, Semantic Differential Scales e Visual Anologue Scales). The choice to select an instrument or another one depends on the research question and design. Instruments research are very useful in research both to describe the variables and to see statistical significant relationships. Very carefully should be their use in the clinical practice for diagnostic assessment.

Use of the Devereux Scales of Mental Disorders for Children and Adolescents with Emotional Disturbance

ERIC Educational Resources Information Center

Reddy, Linda A.; Pfeiffer, Steven I.; Files-Hall, Tara M.

2007-01-01

The present study was designed to investigate the discriminant validity of the Devereux Scales of Mental Disorders (DSMD; Naglieri, LeBuffe, & Pfeiffer, 1994) in relation to a widely used behavior rating scale, the Teacher Report Form (TRF; Achenbach, 1991), in children and adolescents with emotional disturbance (ED). A matched sample of 148…

Allometric scaling law in a simple oxygen exchanging network: possible implications on the biological allometric scaling laws.

PubMed

Santillán, Moisés

2003-07-21

A simple model of an oxygen exchanging network is presented and studied. This network's task is to transfer a given oxygen rate from a source to an oxygen consuming system. It consists of a pipeline, that interconnects the oxygen consuming system and the reservoir and of a fluid, the active oxygen transporting element, moving through the pipeline. The network optimal design (total pipeline surface) and dynamics (volumetric flow of the oxygen transporting fluid), which minimize the energy rate expended in moving the fluid, are calculated in terms of the oxygen exchange rate, the pipeline length, and the pipeline cross-section. After the oxygen exchanging network is optimized, the energy converting system is shown to satisfy a 3/4-like allometric scaling law, based upon the assumption that its performance regime is scale invariant as well as on some feasible geometric scaling assumptions. Finally, the possible implications of this result on the allometric scaling properties observed elsewhere in living beings are discussed.

Simple scale for assessing level of dependency of patients in general practice.

PubMed Central

Willis, J

1986-01-01

A rating scale has been designed for assessing the degree of dependency of patients in general practice. An analysis of the elderly and disabled patients in a two doctor practice is given as an example of its use and simplicity. PMID:3087556

Improving the Quality of Education by Identifying Effective Television Teachers. Final Report.

ERIC Educational Resources Information Center

Myers, Lawrence, Jr.

A project designed to develop a television teacher rating instrument, and to study relationships between ratings of teachers, measures of student personality, and student reports of mood associated with instruction utilized over 2,300 undergraduates: 618 of them described an ideal teacher on an adjectival rating scale and the remainder rated…

Moving bed reactor setup to study complex gas-solid reactions.

PubMed

Gupta, Puneet; Velazquez-Vargas, Luis G; Valentine, Charles; Fan, Liang-Shih

2007-08-01

A moving bed scale reactor setup for studying complex gas-solid reactions has been designed in order to obtain kinetic data for scale-up purpose. In this bench scale reactor setup, gas and solid reactants can be contacted in a cocurrent and countercurrent manner at high temperatures. Gas and solid sampling can be performed through the reactor bed with their composition profiles determined at steady state. The reactor setup can be used to evaluate and corroborate model parameters accounting for intrinsic reaction rates in both simple and complex gas-solid reaction systems. The moving bed design allows experimentation over a variety of gas and solid compositions in a single experiment unlike differential bed reactors where the gas composition is usually fixed. The data obtained from the reactor can also be used for direct scale-up of designs for moving bed reactors.

Effect of Alloying Additions on Oxidation Behaviors of Ni-Fe Based Superalloy for Ultra-Supercritical Boiler Applications

NASA Astrophysics Data System (ADS)

Lu, Jintao; Yang, Zhen; Zhao, Xinbao; Yan, Jingbo; Gu, Y.

A new kind of Ni-Fe-based superalloy is designed recently for 750 °C-class A-USC boiler tube. The oxidation behavior of the designed alloys with various combinations of anti-oxidation additions, Cr, Al and Si, was investigated at 750 °C and 850 °C, respectively. The results indicated that the oxidation rate of tested alloys decreased with the increase of the sum of additions. Cr addition may drop the relative constant of parabolic rate greatly when temperature is raised. But the oxide scale, mainly consisted of NiCr spinel at 750 °C and NiCrMn spinel at 850 °C, was similar while the Cr content is in a range of 20-25 wt.% at tested temperatures. Al addition, however, showed the best effective to reduce the oxidation rates. Internal Al-rich oxide was observed at the scale/metal interface for alloys added with high content of Al and was increased with Al content increase. Very tiny difference between the oxide scales of the Si-added alloys was identified when Si content varies among 0.02-0.05 wt.%. Basing on these results, this presentation discussed the optimum combination of anti-oxidation additions as well as oxidation mechanisms in the designed Ni-Fe-base superalloy.

Modeling of copper sorption onto GFH and design of full-scale GFH adsorbers.

PubMed

Steiner, Michele; Pronk, Wouter; Boller, Markus A

2006-03-01

During rain events, copper wash-off occurring from copper roofs results in environmental hazards. In this study, columns filled with granulated ferric hydroxide (GFH) were used to treat copper-containing roof runoff. It was shown that copper could be removed to a high extent. A model was developed to describe this removal process. The model was based on the Two Region Model (TRM), extended with an additional diffusion zone. The extended model was able to describe the copper removal in long-term experiments (up to 125 days) with variable flow rates reflecting realistic runoff events. The four parameters of the model were estimated based on data gained with specific column experiments according to maximum sensitivity for each parameter. After model validation, the parameter set was used for the design of full-scale adsorbers. These full-scale adsorbers show high removal rates during extended periods of time.

Demonstration-scale evaluation of a novel high-solids anaerobic digestion process for converting organic wastes to fuel gas and compost.

PubMed

Rivard, C J; Duff, B W; Dickow, J H; Wiles, C C; Nagle, N J; Gaddy, J L; Clausen, E C

1998-01-01

Early evaluations of the bioconversion potential for combined wastes such as tuna sludge and sorted municipal solid waste (MSW) were conducted at laboratory scale and compared conventional low-solids, stirred-tank anaerobic systems with the novel, high-solids anaerobic digester (HSAD) design. Enhanced feedstock conversion rates and yields were determined for the HSAD system. In addition, the HSAD system demonstrated superior resiliency to process failure. Utilizing relatively dry feedstocks, the HSAD system is approximately one-tenth the size of conventional low-solids systems. In addition, the HSAD system is capable of organic loading rates (OLRs) on the order of 20-25 g volatile solids per liter digester volume per d (gVS/L/d), roughly 4-5 times those of conventional systems. Current efforts involve developing a demonstration-scale (pilot-scale) HSAD system. A two-ton/d plant has been constructed in Stanton, CA and is currently in the commissioning/startup phase. The purposes of the project are to verify laboratory- and intermediate-scale process performance; test the performance of large-scale prototype mechanical systems; demonstrate the long-term reliability of the process; and generate the process and economic data required for the design, financing, and construction of full-scale commercial systems. This study presents conformational fermentation data obtained at intermediate-scale and a snapshot of the pilot-scale project.

How Do Observational Scales Correlate the Ratings of Children's Behavior during Pediatric Procedural Sedation?

PubMed Central

Moura, Larissa da Silva

2016-01-01

Background. There is little information regarding the ability of observational scales to properly assess children's behavior during procedural sedation. Aim. To evaluate the characteristics of the Houpt scales, the Ohio State University Behavioral Rating Scale (OSUBRS) and the Venham Behavior Rating Scale when applied to preschool children undergoing conscious dental sedation. Design. This study included 27 children, 4–6 years old with early childhood caries that participated in a clinical trial (NCT02284204) that investigated two sedative regimes using oral midazolam/ketamine. Dental appointments were video-recorded; five calibrated observers assessed 1,209 minutes of video recording to score the children's behavior, following the instructions of the investigated scales. Data were analyzed by descriptive analysis and Spearman correlation tests (P < 0.05). Results. The Houpt overall behavior and the Venham scale were highly correlated (rho = −0.87; P < 0.001). OSUBRS scores were better correlated with Houpt overall behavior and Venham ratings, when compared to Houpt scores in the categories for movement and crying. Conclusions. The Houpt overall behavior and the Venham scores are global scales that properly measure children's behavior during dental sedation. Continuous assessment with OSUBRS through videos has a chance to give more precise data, while the Houpt categories can easily demonstrate children's behavior during procedures. PMID:28116299

Construction and Validation of a Professional Suitability Scale for Social Work Practice

ERIC Educational Resources Information Center

Tam, Dora M. Y.; Coleman, Heather

2009-01-01

This article reports on the construction and validation of a professional suitability scale, designed for assessing students' suitability for social work practice. Data were collected from 188 field supervisors who provided usable questionnaires, representing a response rate of 74%. Construct validation by exploratory factor analysis identified a…

Association between childhood dimensions of attention deficit hyperactivity disorder and adulthood clinical severity of bipolar disorders.

PubMed

Etain, Bruno; Lajnef, M; Loftus, J; Henry, C; Raust, A; Gard, S; Kahn, J P; Leboyer, M; Scott, J; Bellivier, F

2017-04-01

Clinical features of attention deficit hyperactivity disorder can be frequently observed in cases with bipolar disorders and associated with greater severity of bipolar disorders. Although designed as a screening tool for attention deficit hyperactivity disorder, the Wender Utah Rating Scale could, given its factorial structure, be useful in investigating the early history of impulsive, inattentive or mood-related symptoms among patients with bipolar disorders. We rated the Wender Utah Rating Scale in 276 adult bipolar disorder cases and 228 healthy controls and tested its factorial structure and any associations with bipolar disorder phenomenology. We confirmed a three-factor structure for the Wender Utah Rating Scale (' impulsivity/temper', ' inattentiveness' and ' mood/self-esteem'). Cases and controls differed significantly on Wender Utah Rating Scale total score and sub-scale scores ( p-values < 10 -5 ). About 23% of bipolar disorder cases versus 5% of controls were classified as ' WURS positive' (odds ratio = 5.21 [2.73-9.95]). In bipolar disorders, higher Wender Utah Rating Scale score was associated with earlier age at onset, severity of suicidal behaviors and polysubstance misuse; multivariate analyses, controlling for age and gender, confirmed the associations with age at onset ( p = 0.001) and alcohol and substance misuse ( p = 0.001). Adults with bipolar disorders who reported higher levels of childhood symptoms on the Wender Utah Rating Scale presented a more severe expression of bipolar disorders in terms of age at onset and comorbidity. The Wender Utah Rating Scale could be employed to screen for attention deficit hyperactivity disorder but also for ' at-risk behaviors' in adult bipolar disorder cases and possibly for prodromal signs of early onset in high-risk subjects.

Responsiveness of the activities of daily living scale of the knee outcome survey and numeric pain rating scale in patients with patellofemoral pain.

PubMed

Piva, Sara R; Gil, Alexandra B; Moore, Charity G; Fitzgerald, G Kelley

2009-02-01

To assess internal and external responsiveness of the Activity of Daily Living Scale of the Knee Outcome Survey and Numeric Pain Rating Scale on patients with patellofemoral pain. One group pre-post design. A total of 60 individuals with patellofemoral pain (33 women; mean age 29.9 (standard deviation 9.6) years). The Activity of Daily Living Scale and the Numeric Pain Rating Scale were assessed before and after 8 weeks of physical therapy program. Patients completed a global rating of change scale at the end of therapy. The standardized effect size, Guyatt responsiveness index, and the minimum clinical important difference were calculated. Standardized effect size of the Activity of Daily Living Scale was 0.63, Guyatt responsiveness index was 1.4, area under the curve was 0.83 (95% confidence interval: 0.72, 0.94), and the minimum clinical important difference corresponded to an increase of 7.1 percentile points. Standardized effect size of the Numeric Pain Rating Scale was 0.72, Guyatt responsiveness index was 2.2, area under the curve was 0.80 (95% confidence interval: 0.70, 0.92), and the minimum clinical important difference corresponded to a decrease of 1.16 points. Information from this study may be helpful to therapists when evaluating the effectiveness of rehabilitation intervention on physical function and pain, and to power future clinical trials on patients with patellofemoral pain.

Electronics Shielding and Reliability Design Tools

NASA Technical Reports Server (NTRS)

Wilson, John W.; ONeill, P. M.; Zang, Thomas A., Jr.; Pandolf, John E.; Koontz, Steven L.; Boeder, P.; Reddell, B.; Pankop, C.

2006-01-01

It is well known that electronics placement in large-scale human-rated systems provides opportunity to optimize electronics shielding through materials choice and geometric arrangement. For example, several hundred single event upsets (SEUs) occur within the Shuttle avionic computers during a typical mission. An order of magnitude larger SEU rate would occur without careful placement in the Shuttle design. These results used basic physics models (linear energy transfer (LET), track structure, Auger recombination) combined with limited SEU cross section measurements allowing accurate evaluation of target fragment contributions to Shuttle avionics memory upsets. Electronics shielding design on human-rated systems provides opportunity to minimize radiation impact on critical and non-critical electronic systems. Implementation of shielding design tools requires adequate methods for evaluation of design layouts, guiding qualification testing, and an adequate follow-up on final design evaluation including results from a systems/device testing program tailored to meet design requirements.

Rasch analysis for psychometric improvement of science attitude rating scales

NASA Astrophysics Data System (ADS)

Oon, Pey-Tee; Fan, Xitao

2017-04-01

Students' attitude towards science (SAS) is often a subject of investigation in science education research. Survey of rating scale is commonly used in the study of SAS. The present study illustrates how Rasch analysis can be used to provide psychometric information of SAS rating scales. The analyses were conducted on a 20-item SAS scale used in an existing dataset of The Trends in International Mathematics and Science Study (TIMSS) (2011). Data of all the eight-grade participants from Hong Kong and Singapore (N = 9942) were retrieved for analyses. Additional insights from Rasch analysis that are not commonly available from conventional test and item analyses were discussed, such as invariance measurement of SAS, unidimensionality of SAS construct, optimum utilization of SAS rating categories, and item difficulty hierarchy in the SAS scale. Recommendations on how TIMSS items on the measurement of SAS can be better designed were discussed. The study also highlights the importance of using Rasch estimates for statistical parametric tests (e.g. ANOVA, t-test) that are common in science education research for group comparisons.

The Validity and Reliability of the Violence Risk Scale-Sexual Offender Version: Assessing Sex Offender Risk and Evaluating Therapeutic Change

ERIC Educational Resources Information Center

Olver, Mark E.; Wong, Stephen C. P.; Nicholaichuk, Terry; Gordon, Audrey

2007-01-01

The Violence Risk Scale-Sexual Offender version (VRS-SO) is a rating scale designed to assess risk and predict sexual recidivism, to measure and link treatment changes to sexual recidivism, and to inform the delivery of sexual offender treatment. The VRS-SO comprises 7 static and 17 dynamic items empirically or conceptually linked to sexual…

Development and Psychometric Evaluation of a Clinical Global Impression for Schizoaffective Disorder Scale

PubMed Central

Daniel, David G; Revicki, Dennis A; Canuso, Carla M; Turkoz, Ibrahim; Fu, Dong-Jing; Alphs, Larry; Ishak, K. Jack; Bartko, John J; Lindenmayer, Jean-Pierre

2012-01-01

Objective: The Clinical Global Impression for Schizoaffective Disorder scale is a new rating scale adapted from the Clinical Global Impression scale for use in patients with schizoaffective disorder. The psychometric characteristics of the Clinical Global Impression for Schizoaffective Disorder are described. Design: Content validity was assessed using an investigator questionnaire. Inter-rater reliability was determined with 12 sets of videotaped interviews rated independently by two trained individuals. Test-retest reliability was assessed using 30 randomly selected raters from clinical trials who evaluated the same videos on separate occasions two weeks apart. Convergent and divergent validity and effect size were evaluated by comparing scores between the Clinical Global Impression for Schizoaffective Disorder and the Positive and Negative Syndrome Scale, 21-item Hamilton Rating Scale for Depression, and Young Mania Rating Scale scales using pooled patient data from two clinical trials. Clinical Global Impression for Schizoaffective Disorder scores were then linked to corresponding Positive and Negative Syndrome Scale scores. Results: Content validity was strong. Inter-rater agreement was good to excellent for most scales and subscales (intra-class correlation coefficient ≥0.50). Test-retest showed good reproducibility, with intraclass correlation coefficients ranging from 0.444 to 0.898. Spearman correlations between Clinical Global Impression for Schizoaffective Disorder domains and corresponding symptom scales were 0.60 or greater, and effect sizes for Clinical Global Impression for Schizoaffective Disorder overall and domain scores were similar to Positive and Negative Syndrome Scale Young Mania Rating Scale, and 21-item Hamilton Rating Scale for Depression scores. Raters anticipated that the scale might be less effective in distinguishing negative from depressive symptoms, and, in fact, the results here may reflect that clinical reality. Conclusion: Multiple lines of evidence support the reliability and validity of the Clinical Global Impression for Schizoaffective Disorder for studies in schizoaffective disorder. PMID:22347687

Freeze-drying simulation framework coupling product attributes and equipment capability: toward accelerating process by equipment modifications.

PubMed

Ganguly, Arnab; Alexeenko, Alina A; Schultz, Steven G; Kim, Sherry G

2013-10-01

A physics-based model for the sublimation-transport-condensation processes occurring in pharmaceutical freeze-drying by coupling product attributes and equipment capabilities into a unified simulation framework is presented. The system-level model is used to determine the effect of operating conditions such as shelf temperature, chamber pressure, and the load size on occurrence of choking for a production-scale dryer. Several data sets corresponding to production-scale runs with a load from 120 to 485 L have been compared with simulations. A subset of data is used for calibration, whereas another data set corresponding to a load of 150 L is used for model validation. The model predictions for both the onset and extent of choking as well as for the measured product temperature agree well with the production-scale measurements. Additionally, we study the effect of resistance to vapor transport presented by the duct with a valve and a baffle in the production-scale freeze-dryer. Computation Fluid Dynamics (CFD) techniques augmented with a system-level unsteady heat and mass transfer model allow to predict dynamic process conditions taking into consideration specific dryer design. CFD modeling of flow structure in the duct presented here for a production-scale freeze-dryer quantifies the benefit of reducing the obstruction to the flow through several design modifications. It is found that the use of a combined valve-baffle system can increase vapor flow rate by a factor of 2.2. Moreover, minor design changes such as moving the baffle downstream by about 10 cm can increase the flow rate by 54%. The proposed design changes can increase drying rates, improve efficiency, and reduce cycle times due to fewer obstructions in the vapor flow path. The comprehensive simulation framework combining the system-level model and the detailed CFD computations can provide a process analytical tool for more efficient and robust freeze-drying of bio-pharmaceuticals. Copyright © 2013 Elsevier B.V. All rights reserved.

Assessing factorial invariance of two-way rating designs using three-way methods

PubMed Central

Kroonenberg, Pieter M.

2015-01-01

Assessing the factorial invariance of two-way rating designs such as ratings of concepts on several scales by different groups can be carried out with three-way models such as the Parafac and Tucker models. By their definitions these models are double-metric factorially invariant. The differences between these models lie in their handling of the links between the concept and scale spaces. These links may consist of unrestricted linking (Tucker2 model), invariant component covariances but variable variances per group and per component (Parafac model), zero covariances and variances different per group but not per component (Replicated Tucker3 model) and strict invariance (Component analysis on the average matrix). This hierarchy of invariant models, and the procedures by which to evaluate the models against each other, is illustrated in some detail with an international data set from attachment theory. PMID:25620936

The effect of Web-based Braden Scale training on the reliability of Braden subscale ratings.

PubMed

Magnan, Morris A; Maklebust, JoAnn

2009-01-01

The primary purpose of this study was to evaluate the effect of Web-based Braden Scale training on the reliability of Braden Scale subscale ratings made by nurses working in acute care hospitals. A secondary purpose was to describe the distribution of reliable Braden subscale ratings before and after Web-based Braden Scale training. Secondary analysis of data from a recently completed quasi-experimental, pretest-posttest, interrater reliability study. A convenience sample of RNs working at 3 Michigan medical centers voluntarily participated in the study. RN participants included nurses who used the Braden Scale regularly at their place of employment ("regular users") as well as nurses who did not use the Braden Scale at their place of employment ("new users"). Using a pretest-posttest, quasi-experimental design, pretest interrater reliability data were collected to identify the percentage of nurses making reliable Braden subscale assessments. Nurses then completed a Web-based Braden Scale training module after which posttest interrater reliability data were collected. The reliability of nurses' Braden subscale ratings was determined by examining the level of agreement/disagreement between ratings made by an RN and an "expert" rating the same patient. In total, 381 RN-to-expert dyads were available for analysis. During both the pretest and posttest periods, the percentage of reliable subscale ratings was highest for the activity subscale, lowest for the moisture subscale, and second lowest for the nutrition subscale. With Web-based Braden Scale training, the percentage of reliable Braden subscale ratings made by new users increased for all 6 subscales with statistically significant improvements in the percentage of reliable assessments made on 3 subscales: sensory-perception, moisture, and mobility. Training had virtually no effect on the percentage of reliable subscale ratings made by regular users of the Braden Scale. With Web-based Braden Scale training the percentage of nurses making reliable ratings increased for all 6 subscales, but this was true for new users only. Additional research is needed to identify educational approaches that effectively improve and sustain the reliability of subscale ratings among regular users of the Braden Scale. Moreover, special attention needs to be given to ensuring that all nurses working with the Braden Scale have a clear understanding of the intended meanings and correct approaches to rating moisture and nutrition subscales.

People’s Preferences of Urban Design Qualities for Walking on a Commercial Street

NASA Astrophysics Data System (ADS)

Ernawati, J.; Surjono; Sudarmo, B. S.

2018-03-01

This research aims to explore people’s preferences of urban design qualities for walking on a commercial street, with Kawi Street located in a commercial neighborhood in the town of Malang Indonesia as the case study. Based on a literature review, this study used eight urban design qualities, i.e., enclosure, legibility, human scale, transparency, complexity, coherence, linkage, and imageability. This study applied a survey research method using a self-administered paper-pencil questionnaire applying two measurement techniques: Likert scale was used to explore people’s evaluations of urban design qualities of the street, while multiple-rating scales were used to measure people’s preference for walking on the street. One hundred and ten people randomly selected as respondents. Regression analysis was employed to explore the influence of urban design qualities on people preference for walking. Results indicated four urban design qualities that affect people’s choice for walking on a commercial street, i.e., transparency, coherence, linkage, and imageability. Implications of the findings will be discussed in the paper.

The validity and internal structure of the Bipolar Depression Rating Scale: data from a clinical trial of N-acetylcysteine as adjunctive therapy in bipolar disorder.

PubMed

Berk, Michael; Dodd, Seetal; Dean, Olivia M; Kohlmann, Kristy; Berk, Lesley; Malhi, Gin S

2010-10-01

Berk M, Dodd S, Dean OM, Kohlmann K, Berk L, Malhi GS. The validity and internal structure of the Bipolar Depression Rating Scale: data from a clinical trial of N-acetylcysteine as adjunctive therapy in bipolar disorder. The phenomenology of unipolar and bipolar disorders differ in a number of ways, such as the presence of mixed states and atypical features. Conventional depression rating instruments are designed to capture the characteristics of unipolar depression and have limitations in capturing the breadth of bipolar disorder. The Bipolar Depression Rating Scale (BDRS) was administered together with the Montgomery Asberg Rating Scale (MADRS) and Young Mania Rating Scale (YMRS) in a double-blind randomised placebo-controlled clinical trial of N-acetyl cysteine for bipolar disorder (N = 75). A factor analysis showed a two-factor solution: depression and mixed symptom clusters. The BDRS has strong internal consistency (Cronbach's alpha = 0.917), the depression cluster showed robust correlation with the MADRS (r = 0.865) and the mixed subscale correlated with the YMRS (r = 0.750). The BDRS has good internal validity and inter-rater reliability and is sensitive to change in the context of a clinical trial.

Response rates for mailout survey-driven studies in patients waiting for thyroid surgery.

PubMed

Eskander, Antoine; Freeman, Jeremy; Rotstein, Lorne; Higgins, Kevin; Enepekides, Danny; Gilbert, Ralph; Brown, Dale; Gullane, Patrick; Irish, Jonathan; Sawka, Anna M; Goldstein, David P

2011-12-01

In the surgical literature, mailout survey studies are becoming more prevalent. The objective of this article is to summarize response rates in patients waiting for thyroid surgery and to document the methodology of mailout survey questionnaires. The results reported here are from a study assessing clinical and sociodemographic factors associated with high levels of anxiety while patients are waiting for thyroid surgery. The surveys used in this study include a sociodemographic patient opinion questionnaire, the Hospital Anxiety Depression Scale (HADS), the Illness Intrusiveness Ratings Scale (IIRS), the Perceived Stress Scale (PSS), and the Impact of Events Scale-Revised (IES-R). A modified Dillman tailored design approach was used. Assessment of nonresponders was performed. The methods used yielded a response rate of 54% with this patient population. Some differences were noted among responders and nonresponders. This response rate is comparable to but in the lower spectrum of that stated in the oncology literature likely owing to the increase in the length of the survey, number of sensitive questions, limitations in the number of mailouts, and limited familiarity with the surgeon requesting participation in research.

Physicians' perception of alternative displays of clinical research evidence for clinical decision support - A study with case vignettes.

PubMed

Slager, Stacey L; Weir, Charlene R; Kim, Heejun; Mostafa, Javed; Del Fiol, Guilherme

2017-07-01

To design alternate information displays that present summaries of clinical trial results to clinicians to support decision-making; and to compare the displays according to efficacy and acceptability. A 6-between (information display presentation order) by 3-within (display type) factorial design. Two alternate displays were designed based on Information Foraging theory: a narrative summary that reduces the content to a few sentences; and a table format that structures the display according to the PICO (Population, Intervention, Comparison, Outcome) framework. The designs were compared with the summary display format available in PubMed. Physicians were asked to review five clinical studies retrieved for a case vignette; and were presented with the three display formats. Participants were asked to rate their experience with each of the information displays according to a Likert scale questionnaire. Twenty physicians completed the study. Overall, participants rated the table display more highly than either the text summary or PubMed's summary format (5.9vs. 5.4vs. 3.9 on a scale between 1 [strongly disagree] and 7 [strongly agree]). Usefulness ratings of seven pieces of information, i.e. patient population, patient age range, sample size, study arm, primary outcome, results of primary outcome, and conclusion, were high (average across all items=4.71 on a 1 to 5 scale, with 1=not at all useful and 5=very useful). Study arm, primary outcome, and conclusion scored the highest (4.9, 4.85, and 4.85 respectively). Participants suggested additional details such as rate of adverse effects. The table format reduced physicians' perceived cognitive effort when quickly reviewing clinical trial information and was more favorably received by physicians than the narrative summary or PubMed's summary format display. Copyright © 2017 Elsevier Inc. All rights reserved.

Clinical utilisation of the "G.T. MSRS", the rating scale for mixed states: 35 cases report.

PubMed

Tavormina, Giuseppe

2015-09-01

The knowledge of the clinical features of the mixed states and of the symptoms of the "mixity" of mood disorders is crucial: to mis-diagnose or mis-treat patients with these symptoms may increase the suicide risk and make worse the evolution of mood disorders. The rating scale "G.T. MSRS" has been designed to improve the clinical effectiveness of both psychiatrists and GPs by enabling them to make an early "general" diagnosis of mixed states. This study presents some cases in which the "G.T. MSRS" scale has been used, in order to demonstrate its usefullness.

The Social, Emotional and Behavioural Difficulties of Primary School Children with Poor Attendance Records

ERIC Educational Resources Information Center

Carroll, H. C. M.

2013-01-01

Two complementary studies of poor and better attenders are presented. To measure emotional and behavioural difficulties (EBD) different teacher-completed rating scales were employed, and to determine social difficulties, the studies used sociometry and some items from the scales. One study had a longitudinal design. It revealed that, after…

Symptom rating scale for assessing hyperthyroidism.

PubMed

Klein, I; Trzepacz, P T; Roberts, M; Levey, G S

1988-02-01

A hyperthyroid symptom scale (HSS) was designed and administered to ten subjects with untreated Graves' disease. All subjects had clinical and chemical evidence of hyperthyroidism and reproducible HSS scores of 20 or more points. During sequential treatments with propranolol hydrochloride (phase 2) followed by propylthiouracil (phase 3) there was a significant decline in the HSS scores at each phase. Accompanying the decrease in HSS scores was a decrease in heart rate, but there was no change in thyroid function test results at phase 2 and a decrease in heart rate, thyroid function test results, and goiter size at phase 3. This new scale includes ten categories of symptoms, it is sensitive to changes in both the adrenergic and metabolic components of hyperthyroidism, and it is useful in the clinical assessment and management of patients with thyrotoxicosis.

Effect of trace metals and sulfite oxidation of adipic acid degradation in FGD systems. Final report Dec 81-May 82

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jarvis, J.B.; Terry, J.C.; Schubert, S.A.

The report gives results of the measurement of the adipic acid degradation rate in a bench-scale flue gas desulfurization (FGD) system, designed to simulate many of the important aspects of full-scale FGD systems. Results show that the adipic acid degradation rate depends on the sulfite oxidation rate, the adipic acid concentration, the presence of manganese in solution, and temperature. The degradation rate is also affected by pH, but only when manganese is present. Adipic acid degradation products identified in the liquid phase include valeric, butyric, propionic, succinic, and glutaric acids. When manganese was present, the predominant degradation products were succinicmore » and glutaric acids. Analysis of solids from the bench scale tests shows large concentrations of coprecipitated adipic acid in low oxidation sulfite solids. By contrast, low quantities of coprecipitated adipic acid were found in high oxidation gypsum solids.« less

The Rangeland Hydrology and Erosion Model

NASA Astrophysics Data System (ADS)

Nearing, M. A.

2016-12-01

The Rangeland Hydrology and Erosion Model (RHEM) is a process-based model that was designed to address rangelands conditions. RHEM is designed for government agencies, land managers and conservationists who need sound, science-based technology to model, assess, and predict runoff and erosion rates on rangelands and to assist in evaluating rangeland conservation practices effects. RHEM is an event-based model that estimates runoff, erosion, and sediment delivery rates and volumes at the spatial scale of the hillslope and the temporal scale of as single rainfall event. It represents erosion processes under normal and fire-impacted rangeland conditions. Moreover, it adopts a new splash erosion and thin sheet-flow transport equation developed from rangeland data, and it links the model hydrologic and erosion parameters with rangeland plant community by providing a new system of parameter estimation equations based on 204 plots at 49 rangeland sites distributed across 15 western U.S. states. A dynamic partial differential sediment continuity equation is used to model the total detachment rate of concentrated flow and rain splash and sheet flow. RHEM is also designed to be used as a calculator, or "engine", within other watershed scale models. From the research perspective RHEM acts as a vehicle for incorporating new scientific findings from rangeland infiltration, runoff, and erosion studies. Current applications of the model include: 1) a web site for general use (conservation planning, research, etc.), 2) National Resource Inventory reports to Congress, 3) as a computational engine within watershed scale models (e.g., KINEROS, HEC), 4) Ecological Site & State and Transition Descriptions, 5) proposed in 2015 to become part of the NRCS Desktop applications for field offices.

Nonlocal and collective relaxation in stellar systems

NASA Technical Reports Server (NTRS)

Weinberg, Martin D.

1993-01-01

The modal response of stellar systems to fluctuations at large scales is presently investigated by means of analytic theory and n-body simulation; the stochastic excitation of these modes is shown to increase the relaxation rate even for a system which is moderately far from instability. The n-body simulations, when designed to suppress relaxation at small scales, clearly show the effects of large-scale fluctuations. It is predicted that large-scale fluctuations will be largest for such marginally bound systems as forming star clusters and associations.

Assessing Children's Perceptions of Academic Interventions: The Kids Intervention Profile

ERIC Educational Resources Information Center

Eckert, Tanya L.; Hier, Bridget O.; Hamsho, Narmene F.; Malandrino, Rigby D.

2017-01-01

The psychometric properties of the Kids Intervention Profile (KIP), a rating scale designed to measure academic intervention acceptability from the perspective of students, were examined as well as the influence of background factors on students' acceptability ratings. Data were extracted from 4 randomized controlled trials investigating the…

Test Review: Delis, D. (2012) "Delis Rating of Executive Function (D-REF)." Bloomington, Minnesota: Pearson

ERIC Educational Resources Information Center

Warnick, Brittany; Drake, Morgan; Vidrine, Stephanie

2015-01-01

The Delis Rating of Executive Function (D-REF) is a set of rating scales designed to assess executive functions and their constituent sub-processes in children and adolescents between the ages of 5 and 18. More specifically, the D-REF is a supplemental assessment of children and adolescents demonstrating behavioral or cognitive difficulties often…

Words That Fascinate the Listener: Predicting Affective Ratings of On-Line Lectures

ERIC Educational Resources Information Center

Weninger, Felix; Staudt, Pascal; Schuller, Björn

2013-01-01

In a large scale study on 843 transcripts of Technology, Entertainment and Design (TED) talks, the authors address the relation between word usage and categorical affective ratings of lectures by a large group of internet users. Users rated the lectures by assigning one or more predefined tags which relate to the affective state evoked in the…

Delphi Rating on the Internet

PubMed Central

Deshpande, Aniruddha M.; Shiffman, Richard N.

2003-01-01

We designed an application to allow respondents to rate components of clinical guidelines on the Internet. Twenty-three invited experts completed the rating followed by a satisfaction survey using a 5-level Likert scale. The experts felt that Web data entry was convenient, acceptable and easily accessible. We conclude that Web-based Delphi rating for consensus development is a convenient and acceptable alternative to the traditional paper-based method. PMID:14728333

Lightweight Vacuum Jacket for Cryogenic Insulation. Volume 1

NASA Technical Reports Server (NTRS)

Barclay, D. L.; Bell, J. E.; Brogren, E. W.; Straayer, J. W.

1975-01-01

The feasibility of producing a lightweight vacuum jacket using state-of-the-art technology and materials was examined. Design and analytical studies were made on a full-scale, orbital maneuvering system fuel tank. Preliminary design details were made for the tank assembly, including an optimized vacuum jacket and multilayer insulation system. A half-scale LH2 test model was designed and fabricated, and a force/stiffness proof test was conducted on the vacuum jacket. A vacuum leak rate of .000001 atmosphere ml of helium per second was measured, approximately 1500 hours of vacuum pressure were sustained, and 29 vacuum-pressure cycles were experienced prior to failure.

Neuroimaging correlates of parent ratings of working memory in typically developing children

PubMed Central

Mahone, E. Mark; Martin, Rebecca; Kates, Wendy R.; Hay, Trisha; Horská, Alena

2009-01-01

The purpose of the present study was to investigate construct validity of parent ratings of working memory in children, using a multi-trait/multi-method design including neuroimaging, rating scales, and performance-based measures. Thirty-five typically developing children completed performance-based tests of working memory and nonexecutive function (EF) skills, received volumetric MRI, and were rated by parents on both EF-specific and broad behavior rating scales. After controlling for total cerebral volume and age, parent ratings of working memory were significantly correlated with frontal gray, but not temporal, parietal, or occipital gray, or any lobar white matter volumes. Performance-based measures of working memory were also moderately correlated with frontal lobe gray matter volume; however, non-EF parent ratings and non-EF performance-based measures were not correlated with frontal lobe volumes. Results provide preliminary support for the convergent and discriminant validity of parent ratings of working memory, and emphasize their utility in exploring brain–behavior relationships in children. Rating scales that directly examine EF skills may potentially have ecological validity, not only for “everyday” function, but also as correlates of brain volume. PMID:19128526

Reusable Launch Vehicle Control in Multiple Time Scale Sliding Modes

NASA Technical Reports Server (NTRS)

Shtessel, Yuri

1999-01-01

A reusable launch vehicle control problem during ascent is addressed via multiple-time scaled continuous sliding mode control. The proposed sliding mode controller utilizes a two-loop structure and provides robust, de-coupled tracking of both orientation angle command profiles and angular rate command profiles in the presence of bounded external disturbances and plant uncertainties. Sliding mode control causes the angular rate and orientation angle tracking error dynamics to be constrained to linear, de-coupled, homogeneous, and vector valued differential equations with desired eigenvalues placement. The dual-time scale sliding mode controller was designed for the X-33 technology demonstration sub-orbital launch vehicle in the launch mode. 6DOF simulation results show that the designed controller provides robust, accurate, de-coupled tracking of the orientation angle command profiles in presence of external disturbances and vehicle inertia uncertainties. It creates possibility to operate the X-33 vehicle in an aircraft-like mode with reduced pre-launch adjustment of the control system.

Reusable Launch Vehicle Control In Multiple Time Scale Sliding Modes

NASA Technical Reports Server (NTRS)

Shtessel, Yuri; Hall, Charles; Jackson, Mark

2000-01-01

A reusable launch vehicle control problem during ascent is addressed via multiple-time scaled continuous sliding mode control. The proposed sliding mode controller utilizes a two-loop structure and provides robust, de-coupled tracking of both orientation angle command profiles and angular rate command profiles in the presence of bounded external disturbances and plant uncertainties. Sliding mode control causes the angular rate and orientation angle tracking error dynamics to be constrained to linear, de-coupled, homogeneous, and vector valued differential equations with desired eigenvalues placement. Overall stability of a two-loop control system is addressed. An optimal control allocation algorithm is designed that allocates torque commands into end-effector deflection commands, which are executed by the actuators. The dual-time scale sliding mode controller was designed for the X-33 technology demonstration sub-orbital launch vehicle in the launch mode. Simulation results show that the designed controller provides robust, accurate, de-coupled tracking of the orientation angle command profiles in presence of external disturbances and vehicle inertia uncertainties. This is a significant advancement in performance over that achieved with linear, gain scheduled control systems currently being used for launch vehicles.

Using Quality Rating Scales for Professional Development: Experiences from the UK

ERIC Educational Resources Information Center

Mathers, Sandra; Linskey, Faye; Seddon, Judith; Sylva, Kathy

2007-01-01

The ECERS-R and ITERS-R are among two of the most widely used observational measures for describing the characteristics of early childhood education and care. This paper describes a professional development programme currently taking place in seven regions across England, designed to train local government staff in the application of the scales as…

Hackneyed, Acned, or Just Plain Good: Perceiving Quality in Young Adult Fiction.

ERIC Educational Resources Information Center

Agee, Hugh

A rating scale was developed by Stephen Dunning for evaluating adolescent literature objectively. The distinguishing features of the scale's five categories are designed to produce a numerical score between 5 and 25 (each category a 1-to-5 ranking for poor/excellent quality), indicating the relative worth of a specific literary work. The first…

Evaluation of low-cost commercial-off-the-shelf autopilot systems for SUAS operations

NASA Astrophysics Data System (ADS)

Brown, Calvin Thomas

With this increase in unmanned aircraft system (UAS) operations, there is a need for a structured process to evaluate different commercially available systems, particularly autopilots. The Remotely Operated Aircraft Management, Interpretation, and Navigation from Ground or ROAMING scale was developed to meet this need. This scale is a modification of the widely accepted Handling Qualities Rating scale developed by George Cooper and Robert Harper Jr. The Cooper-Harper scale allows pilots to rate a vehicle's performance in completing some task. Similarly, the ROAMING scale allows UAS operators to evaluate the management and observability of UAS in completing some task. The standardized evaluative process consists of cost, size, weight, and power (SWAP) analysis, ease of implementation through procedural description of setup, ROAMING scale rating, a slightly modified NASA TLX rating, and comparison of manual operation to autonomous operation of the task. This standard for evaluation of autopilots and their software will lead to better understanding of the workload placed on UAS operators and indicate where improvements to design and operational procedures can be made. An assortment of low-cost commercial-off-the-shelf (COTS) autopilots were selected for use in the development of the evaluation and results of these tests demonstrate the commonalities and differences in these systems.

Downwind pre-aligned rotors for extreme-scale wind turbines

DOE PAGES

Loth, Eric; Steele, Adam; Qin, Chao; ...

2017-03-08

Downwind force angles are small for current turbines systems (1-5 MW) such that they may be readily accommodated by conventional upwind configurations. However, analysis indicates that extreme-scale systems (10-20 MW) will have larger angles that may benefit from downwind-aligned configurations. To examine potential rotor mass reduction, the pre-alignment concept was investigated a two-bladed configuration by keeping the structural and aerodynamic characteristics of each blade fixed (to avoids a complete blade re-design). Simulations for a 13.2 MW rated rotor at steady-state conditions show that this concept-level two-bladed design may yield 25% rotor mass savings while also reducing average blade stress overmore » all wind speeds. These results employed a pre-alignment on the basis of a wind speed of 1.25 times the rated wind speed. The downwind pre-aligned concept may also reduce damage equivalent loads on the blades by 60% for steady rated wind conditions. Even higher mass and damage equivalent load savings (relative to conventional upwind designs) may be possible for larger systems (15-20 MW) for which load-alignment angles become even larger. Furthermore, much more work is needed to determine whether this concept can be translated into a practical design that must meet a wide myriad of other criteria.« less

Downwind pre-aligned rotors for extreme-scale wind turbines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loth, Eric; Steele, Adam; Qin, Chao

Downwind force angles are small for current turbines systems (1-5 MW) such that they may be readily accommodated by conventional upwind configurations. However, analysis indicates that extreme-scale systems (10-20 MW) will have larger angles that may benefit from downwind-aligned configurations. To examine potential rotor mass reduction, the pre-alignment concept was investigated a two-bladed configuration by keeping the structural and aerodynamic characteristics of each blade fixed (to avoids a complete blade re-design). Simulations for a 13.2 MW rated rotor at steady-state conditions show that this concept-level two-bladed design may yield 25% rotor mass savings while also reducing average blade stress overmore » all wind speeds. These results employed a pre-alignment on the basis of a wind speed of 1.25 times the rated wind speed. The downwind pre-aligned concept may also reduce damage equivalent loads on the blades by 60% for steady rated wind conditions. Even higher mass and damage equivalent load savings (relative to conventional upwind designs) may be possible for larger systems (15-20 MW) for which load-alignment angles become even larger. Furthermore, much more work is needed to determine whether this concept can be translated into a practical design that must meet a wide myriad of other criteria.« less

Innovative Water Management Technology to Reduce Environmental Impacts of Produced Water

DOE Office of Scientific and Technical Information (OSTI.GOV)

Castle, James; Rodgers, John; Alley, Bethany

2013-05-15

Clemson University with Chevron as an industry partner developed and applied treatment technology using constructed wetland systems to decrease targeted constituents in simulated and actual produced waters to achieve reuse criteria and discharge limits. Pilot-scale and demonstration constructed wetland treatment system (CWTS) experiments led to design strategies for treating a variety of constituents of concern (COCs) in produced waters including divalent metals, metalloids, oil and grease, and ammonia. Targeted biogeochemical pathways for treatment of COCs in pilot-scale CWTS experiments included divalent metal sulfide precipitation through dissimilatory sulfate reduction, metal precipitation through oxidation, reduction of selenite to insoluble elemental selenium, aerobicmore » biodegradation of oil, nitrification of ammonia to nitrate, denitrification of nitrate to nitrogen gas, separation of oil using an oilwater separator, and sorption of ammonia to zeolite. Treatment performance results indicated that CWTSs can be designed and built to promote specific environmental and geochemical conditions in order for targeted biogeochemical pathways to operate. The demonstration system successfully achieved consistent removal extents even while inflow concentrations of COCs in the produced water differed by orders of magnitude. Design strategies used in the pilot-scale and demonstration CWTSs to promote specific conditions that can be applied to designing full-scale CWTSs include plant and soil selection, water-depth selection, addition of amendments, and hydraulic retention time (HRT). These strategies allow conditions within a CWTS to be modified to achieve ranges necessary for the preferred biogeochemical treatment pathways. In the case of renovating a produced water containing COCs that require different biogeochemical pathways for treatment, a CWTS can be designed with sequential cells that promote different conditions. For example, the pilot-scale CWTS for post-reverse osmosis produced water was designed to promote oxidizing conditions within the first wetland cell for nitrification of ammonia, and the subsequent three cells were designed to promote reducing conditions for denitrification of nitrate. By incorporating multiple wetland cells in a CWTS, the conditions within each cell can be modified for removal of specific COCs. In addition, a CWTS designed with multiple cells allows for convenient sample collection points so that biogeochemical conditions of individual cells can be monitored and performance evaluated. Removal rate coefficients determined from the pilot-scale CWTS experiments and confirmed by the demonstration system can be used to calculate HRTs required to treat COCs in full-scale CWTSs. The calculated HRTs can then be used to determine the surface area or ?footprint? of a full-size CWTS for a given inflow rate of produced water.« less

Innovative Water Management Technology to Reduce Environment Impacts of Produced Water

DOE Office of Scientific and Technical Information (OSTI.GOV)

Castle, James W.; Rodgers, John H.; Alley, Bethany

2013-08-08

Clemson University with Chevron as an industry partner developed and applied treatment technology using constructed wetland systems to decrease targeted constituents in simulated and actual produced waters to achieve reuse criteria and discharge limits. Pilot-scale and demonstration constructed wetland treatment system (CWTS) experiments led to design strategies for treating a variety of constituents of concern (COCs) in produced waters including divalent metals, metalloids, oil and grease, and ammonia. Targeted biogeochemical pathways for treatment of COCs in pilot-scale CWTS experiments included divalent metal sulfide precipitation through dissimilatory sulfate reduction, metal precipitation through oxidation, reduction of selenite to insoluble elemental selenium, aerobicmore » biodegradation of oil, nitrification of ammonia to nitrate, denitrification of nitrate to nitrogen gas, separation of oil using an oilwater separator, and sorption of ammonia to zeolite. Treatment performance results indicated that CWTSs can be designed and built to promote specific environmental and geochemical conditions in order for targeted biogeochemical pathways to operate. The demonstration system successfully achieved consistent removal extents even while inflow concentrations of COCs in the produced water differed by orders of magnitude. Design strategies used in the pilot-scale and demonstration CWTSs to promote specific conditions that can be applied to designing full-scale CWTSs include plant and soil selection, water-depth selection, addition of amendments, and hydraulic retention time (HRT). These strategies allow conditions within a CWTS to be modified to achieve ranges necessary for the preferred biogeochemical treatment pathways. In the case of renovating a produced water containing COCs that require different biogeochemical pathways for treatment, a CWTS can be designed with sequential cells that promote different conditions. For example, the pilot-scale CWTS for post-reverse osmosis produced water was designed to promote oxidizing conditions within the first wetland cell for nitrification of ammonia, and the subsequent three cells were designed to promote reducing conditions for denitrification of nitrate. By incorporating multiple wetland cells in a CWTS, the conditions within each cell can be modified for removal of specific COCs. In addition, a CWTS designed with multiple cells allows for convenient sample collection points so that biogeochemical conditions of individual cells can be monitored and performance evaluated. Removal rate coefficients determined from the pilot-scale CWTS experiments and confirmed by the demonstration system can be used to calculate HRTs required to treat COCs in full-scale CWTSs. The calculated HRTs can then be used to determine the surface area or footprint of a full-size CWTS for a given inflow rate of produced water.« less

Innovative Water Management Technology to Reduce Environment Impacts of Produced Water

DOE Office of Scientific and Technical Information (OSTI.GOV)

Castle, James; Rodgers, John; Alley, Bethany

2013-05-15

Clemson University with Chevron as an industry partner developed and applied treatment technology using constructed wetland systems to decrease targeted constituents in simulated and actual produced waters to achieve reuse criteria and discharge limits. Pilot-scale and demonstration constructed wetland treatment system (CWTS) experiments led to design strategies for treating a variety of constituents of concern (COCs) in produced waters including divalent metals, metalloids, oil and grease, and ammonia. Targeted biogeochemical pathways for treatment of COCs in pilot-scale CWTS experiments included divalent metal sulfide precipitation through dissimilatory sulfate reduction, metal precipitation through oxidation, reduction of selenite to insoluble elemental selenium, aerobicmore » biodegradation of oil, nitrification of ammonia to nitrate, denitrification of nitrate to nitrogen gas, separation of oil using an oilwater separator, and sorption of ammonia to zeolite. Treatment performance results indicated that CWTSs can be designed and built to promote specific environmental and geochemical conditions in order for targeted biogeochemical pathways to operate. The demonstration system successfully achieved consistent removal extents even while inflow concentrations of COCs in the produced water differed by orders of magnitude. Design strategies used in the pilot-scale and demonstration CWTSs to promote specific conditions that can be applied to designing full-scale CWTSs include plant and soil selection, water-depth selection, addition of amendments, and hydraulic retention time (HRT). These strategies allow conditions within a CWTS to be modified to achieve ranges necessary for the preferred biogeochemical treatment pathways. In the case of renovating a produced water containing COCs that require different biogeochemical pathways for treatment, a CWTS can be designed with sequential cells that promote different conditions. For example, the pilot-scale CWTS for post-reverse osmosis produced water was designed to promote oxidizing conditions within the first wetland cell for nitrification of ammonia, and the subsequent three cells were designed to promote reducing conditions for denitrification of nitrate. By incorporating multiple wetland cells in a CWTS, the conditions within each cell can be modified for removal of specific COCs. In addition, a CWTS designed with multiple cells allows for convenient sample collection points so that biogeochemical conditions of individual cells can be monitored and performance evaluated. Removal rate coefficients determined from the pilot-scale CWTS experiments and confirmed by the demonstration system can be used to calculate HRTs required to treat COCs in full-scale CWTSs. The calculated HRTs can then be used to determine the surface area or footprint of a full-size CWTS for a given inflow rate of produced water.« less

All Together Now: Measuring Staff Cohesion in Special Education Classrooms

PubMed Central

Kratz, Hilary E.; Locke, Jill; Piotrowski, Zinnia; Ouellette, Rachel R.; Xie, Ming; Stahmer, Aubyn C.; Mandell, David S.

2015-01-01

This study sought to validate a new measure, the Classroom Cohesion Survey (CCS), designed to examine the relationship between teachers and classroom assistants in autism support classrooms. Teachers, classroom assistants, and external observers showed good inter-rater agreement on the CCS and good internal consistency for all scales. Simple factor structures were found for both teacher- and classroom assistant–rated scales, with one-factor solutions for both scales. Paired t tests revealed that on average, classroom assistants rated classroom cohesion stronger than teachers. The CCS may be an effective tool for measuring cohesion between classroom staff and may have an important impact on various clinical and implementation outcomes in school settings. PMID:26213443

Design and fabrication of a high temperature leading edge heating array, phase 1

NASA Technical Reports Server (NTRS)

1972-01-01

Progress during a Phase 1 program to design a high temperature heating array is reported for environmentally testing full-scale shuttle leading edges (30 inch span, 6 to 15 inch radius) at flight heating rates and pressures. Heat transfer analyses of the heating array, individual modules, and the shuttle leading edge were performed, which influenced the array design, and the design, fabrication, and testing of a prototype heater module.

Preliminary Investigation of Several Root Designs for Cermet Turbine Blades in Turbojet Engine III : Curved-root Design

NASA Technical Reports Server (NTRS)

Pinkel, Benjamin; Deutsch, George C; Morgan, William C

1955-01-01

Stresses om tje root fastenings of turbine blades were appreciably reduced by redesign of the root. The redesign consisted in curving the root to approximately conform to the camber of the airfoil and elimination of the blade platform. Full-scale jet-engine tests at rated speed using cermet blades of the design confirmed the improvement.

Development of the Comprehensive Cervical Dystonia Rating Scale: Methodology

PubMed Central

Comella, Cynthia L.; Fox, Susan H.; Bhatia, Kailash P.; Perlmutter, Joel S.; Jinnah, Hyder A.; Zurowski, Mateusz; McDonald, William M.; Marsh, Laura; Rosen, Ami R.; Waliczek, Tracy; Wright, Laura J.; Galpern, Wendy R.; Stebbins, Glenn T.

2016-01-01

We present the methodology utilized for development and clinimetric testing of the Comprehensive Cervical Dystonia (CD) Rating scale, or CCDRS. The CCDRS includes a revision of the Toronto Western Spasmodic Torticollis Rating Scale (TWSTRS-2), a newly developed psychiatric screening tool (TWSTRS-PSYCH), and the previously validated Cervical Dystonia Impact Profile (CDIP-58). For the revision of the TWSTRS, the original TWSTRS was examined by a committee of dystonia experts at a dystonia rating scales workshop organized by the Dystonia Medical Research Foundation. During this workshop, deficiencies in the standard TWSTRS were identified and recommendations for revision of the severity and pain subscales were incorporated into the TWSTRS-2. Given that no scale currently evaluates the psychiatric features of cervical dystonia (CD), we used a modified Delphi methodology and a reiterative process of item selection to develop the TWSTRS-PSYCH. We also included the CDIP-58 to capture the impact of CD on quality of life. The three scales (TWSTRS2, TWSTRS-PSYCH, and CDIP-58) were combined to construct the CCDRS. Clinimetric testing of reliability and validity of the CCDRS are described. The CCDRS was designed to be used in a modular fashion that can measure the full spectrum of CD. This scale will provide rigorous assessment for studies of natural history as well as novel symptom-based or disease-modifying therapies. PMID:27088112

Development of the Comprehensive Cervical Dystonia Rating Scale: Methodology.

PubMed

Comella, Cynthia L; Fox, Susan H; Bhatia, Kailash P; Perlmutter, Joel S; Jinnah, Hyder A; Zurowski, Mateusz; McDonald, William M; Marsh, Laura; Rosen, Ami R; Waliczek, Tracy; Wright, Laura J; Galpern, Wendy R; Stebbins, Glenn T

2015-06-01

We present the methodology utilized for development and clinimetric testing of the Comprehensive Cervical Dystonia (CD) Rating scale, or CCDRS. The CCDRS includes a revision of the Toronto Western Spasmodic Torticollis Rating Scale (TWSTRS-2), a newly developed psychiatric screening tool (TWSTRS-PSYCH), and the previously validated Cervical Dystonia Impact Profile (CDIP-58). For the revision of the TWSTRS, the original TWSTRS was examined by a committee of dystonia experts at a dystonia rating scales workshop organized by the Dystonia Medical Research Foundation. During this workshop, deficiencies in the standard TWSTRS were identified and recommendations for revision of the severity and pain subscales were incorporated into the TWSTRS-2. Given that no scale currently evaluates the psychiatric features of cervical dystonia (CD), we used a modified Delphi methodology and a reiterative process of item selection to develop the TWSTRS-PSYCH. We also included the CDIP-58 to capture the impact of CD on quality of life. The three scales (TWSTRS2, TWSTRS-PSYCH, and CDIP-58) were combined to construct the CCDRS. Clinimetric testing of reliability and validity of the CCDRS are described. The CCDRS was designed to be used in a modular fashion that can measure the full spectrum of CD. This scale will provide rigorous assessment for studies of natural history as well as novel symptom-based or disease-modifying therapies.

Development of an Observational Rating Schedule for Preschool Children's Peer-Group Behavior.

ERIC Educational Resources Information Center

Cunningham, Jo Lynn; Boger, Robert P.

The feasiblity of an observational rating scale which would provide objective, reliable and quantifiable measures of social and affective behavior was investigated. The Observation of Socialization Behavior (OSB), focusing on peer-group behavior of pre-school children and designed for use in unstructured situations was developed. Two forms of the…

Design Your Own Home. Courseware Evaluation for Vocational and Technical Education.

ERIC Educational Resources Information Center

Turner, Gordon; And Others

This courseware evaluation rates the Design Your Own Home program developed by Avant-Garde Publishing Company. (The program--not contained in this document--uses standard architectural scales and 126 shapes to allow creation of structural floorplans and sideviews.) Part A describes the program in terms of subject area and hardware requirements…

The Visual Analogue Scale for Rating, Ranking and Paired-Comparison (VAS-RRP): A new technique for psychological measurement.

PubMed

Sung, Yao-Ting; Wu, Jeng-Shin

2018-04-17

Traditionally, the visual analogue scale (VAS) has been proposed to overcome the limitations of ordinal measures from Likert-type scales. However, the function of VASs to overcome the limitations of response styles to Likert-type scales has not yet been addressed. Previous research using ranking and paired comparisons to compensate for the response styles of Likert-type scales has suffered from limitations, such as that the total score of ipsative measures is a constant that cannot be analyzed by means of many common statistical techniques. In this study we propose a new scale, called the Visual Analogue Scale for Rating, Ranking, and Paired-Comparison (VAS-RRP), which can be used to collect rating, ranking, and paired-comparison data simultaneously, while avoiding the limitations of each of these data collection methods. The characteristics, use, and analytic method of VAS-RRPs, as well as how they overcome the disadvantages of Likert-type scales, ranking, and VASs, are discussed. On the basis of analyses of simulated and empirical data, this study showed that VAS-RRPs improved reliability, response style bias, and parameter recovery. Finally, we have also designed a VAS-RRP Generator for researchers' construction and administration of their own VAS-RRPs.

A study of energy-size relationship and wear rate in a lab-scale high pressure grinding rolls unit

NASA Astrophysics Data System (ADS)

Rashidi Dashtbayaz, Samira

This study is focused on two independent topics of energy-size relationship and wear-rate measurements on a lab-scale high pressure grinding rolls (HPGR). The first part of this study has been aimed to investigate the influence of the operating parameters and the feed characteristics on the particle-bed breakage using four different ore samples in a 200 mm x 100 mm lab-scale HPGR. Additionally, multistage grinding, scale-up from a lab-scale HPGR, and prediction of the particle size distributions have been studied in detail. The results obtained from energy-size relationship studies help with better understanding of the factors contributing to more energy-efficient grinding. It will be shown that the energy efficiency of the two configurations of locked-cycle and open multipass is completely dependent on the ore properties. A test procedure to produce the scale-up data is presented. The comparison of the scale-up factors between the data obtained on the University of Utah lab-scale HPGR and the industrial machine at the Newmont Boddington plant confirmed the applicability of lab-scale machines for trade-off studies. The population balance model for the simulation of product size distributions has shown to work well with the breakage function estimated through tests performed on the HPGR at high rotational speed. Selection function has been estimated by back calculation of population balance model with the help of the experimental data. This is considered to be a major step towards advancing current research on the simulation of particle size distribution by using the HPGR machine for determining the breakage function. Developing a technique/setup to measure the wear rate of the HPGR rolls' surface is the objective of the second topic of this dissertation. A mockup was initially designed to assess the application of the linear displacement sensors for measuring the rolls' weight loss. Upon the analysis of that technique and considering the corresponding sources of errors, the application of the 2D distance measurement sensors was studied to directly determine the wear rate on the lab-sale HPGR roll. Results obtained from various grinding tests revealed that the operating variations were beyond the expected wear rate. Based on the valuable outcomes from the two mentioned experimental designs, a cup-disc arrangement similar to piston-die apparatus was developed to indirectly measure the wear rate on the HPGR roll. The preliminary outputs proved to be promising for further investigation into the development of this method in order to relate the measured data on the cup-disc apparatus to the actual wear rate on the HPGR rolls.

Heart rate detection from an electronic weighing scale.

PubMed

González-Landaeta, R; Casas, O; Pallàs-Areny, R

2007-01-01

We propose a novel technique for heart rate detection on a subject that stands on a common electronic weighing scale. The detection relies on sensing force variations related to the blood acceleration in the aorta, works even if wearing footwear, and does not require any sensors attached to the body. We have applied our method to three different weighing scales, and estimated whether their sensitivity and frequency response suited heart rate detection. Scale sensitivities were from 490 nV/V/N to 1670 nV/V/N, all had an underdamped transient response and their dynamic gain error was below 19% at 10 Hz, which are acceptable values for heart rate estimation. We also designed a pulse detection system based on off-the-shelf integrated circuits, whose gain was about 70x10(3) and able to sense force variations about 240 mN. The signal-to-noise ratio (SNR) of the main peaks of the pulse signal detected was higher than 48 dB, which is large enough to estimate the heart rate by simple signal processing methods. To validate the method, the ECG and the force signal were simultaneously recorded on 12 volunteers. The maximal error obtained from heart rates determined from these two signals was +/-0.6 beats/minute.

Exploring factors that influence work analysis data: A meta-analysis of design choices, purposes, and organizational context.

PubMed

DuVernet, Amy M; Dierdorff, Erich C; Wilson, Mark A

2015-09-01

Work analysis is fundamental to designing effective human resource systems. The current investigation extends previous research by identifying the differential effects of common design decisions, purposes, and organizational contexts on the data generated by work analyses. The effects of 19 distinct factors that span choices of descriptor, collection method, rating scale, and data source, as well as project purpose and organizational features, are explored. Meta-analytic results cumulated from 205 articles indicate that many of these variables hold significant consequences for work analysis data. Factors pertaining to descriptor choice, collection method, rating scale, and the purpose for conducting the work analysis each showed strong associations with work analysis data. The source of the work analysis information and organizational context in which it was conducted displayed fewer relationships. Findings can be used to inform choices work analysts make about methodology and postcollection evaluations of work analysis information. (c) 2015 APA, all rights reserved).

Dimensional approach to symptom factors of major depressive disorder in Koreans, using the Brief Psychiatric Rating Scale: the Clinical Research Center for Depression of South Korea study.

PubMed

Park, Seon-Cheol; Jang, Eun Young; Kim, Daeho; Jun, Tae-Youn; Lee, Min-Soo; Kim, Jae-Min; Kim, Jung-Bum; Jo, Sun-Jin; Park, Yong Chon

2015-01-01

Although major depressive disorder (MDD) has a variety of symptoms beyond the affective dimensions, the factor structure and contents of comprehensive psychiatric symptoms of this disorder have rarely been explored using the 18-item Brief Psychiatric Rating Scale (BPRS). We aimed to identify the factor structure of the 18-item BPRS in Korean MDD patients. A total of 258 MDD patients were recruited from a multicenter sample of the Clinical Research Center for Depression of South Korea study. Psychometric scales were used to assess overall psychiatric symptoms (BPRS), depression (Hamilton Depression Rating Scale), anxiety (Hamilton Anxiety Rating Scale), global severity (Clinical Global Impression of Severity Scale), suicidal ideation (Scale for Suicide Ideation), functioning (Social and Occupational Functioning Assessment Scale), and quality of life (World Health Organization Quality of Life Assessment-abbreviated version). Common factor analysis with oblique rotation was used to yield factor structure. A four-factor structure was designed and interpreted by the symptom dimensions to reflect mood disturbance, positive symptoms/apathy, bipolarity, and thought distortion/mannerism. These individual factors were also significantly correlated with clinical variables. The findings of this study support the view that the BPRS may be a promising measuring tool for the initial assessment of MDD patients. In addition, the four-factor structure of the BPRS may be useful in understanding the mood and psychotic characteristics of these patients. Copyright © 2014. Published by Elsevier Taiwan.

The Criterion and Discriminant Validity of the Referential Thinking (REF) Scale

ERIC Educational Resources Information Center

Startup, Mike; Sakrouge, Rebecca; Mason, Oliver J.

2010-01-01

The Referential Thinking (REF) scale was designed to be a comprehensive self-report measure of both simple and guilty ideas of reference in the general population. One aim of the present study was to test the proposed interpretations of REF scores by comparing REF scores with ratings of delusions among psychotic patients. A 2nd aim was to test…

High-rate composting of barley dregs with sewage sludge in a pilot scale bioreactor.

PubMed

Lu, Li-An; Kumar, Mathava; Tsai, Jen-Chieh; Lin, Jih-Gaw

2008-05-01

The feasibility of high-rate composting of barley dregs and sewage sludge was examined using a pilot scale bioreactor. A central composite design (CCD) was used to optimize the mix ratio of barley dregs/sewage sludge and moisture content. The performance of the bioreactor was monitored as a function of carbon decomposition rate (CDR) and total volatile solids (TVS) loss rate. The optimum range of mix ratio and moisture content was found to be 35-40% and 55-60%, respectively. High CO2 evolution rate (CER) and TVS loss rate were observed after 3 days of the composting and the compost was matured/stable after 7 days. Cardinal temperature model with inflection (CTMI) was used to analyze the compost stability with respect to CER as a parameter of composting efficiency. After examining the phytotoxicity, the compost can be promoted for land application.

Discriminant of validity the Wender Utah rating scale in Iranian adults.

PubMed

Farokhzadi, Farideh; Mohammadi, Mohammad Reza; Salmanian, Maryam

2014-01-01

The aim of this study is the normalization of the Wender Utah rating scale which is used to detect adults with Attention-Deficit and Hyperactivity Disorder (ADHD). Available sampling method was used to choose 400 parents of children (200 parents of children with ADHD as compared to 200 parents of normal children). Wender Utah rating scale, which has been designed to diagnose ADHD in adults, is filled out by each of the parents to most accurately diagnose of ADHD in parents. Wender Utah rating scale was divided into 6 sub scales which consist of dysthymia, oppositional defiant disorder; school work problems, conduct disorder, anxiety, and ADHD were analyzed with exploratory factor analysis method. The value of (Kaiser-Meyer-Olkin) KMO was 86.5% for dysthymia, 86.9% for oppositional defiant disorder, 77.5% for school related problems, 90.9% for conduct disorder, 79.6% for anxiety and 93.5% for Attention deficit/hyperactivity disorder, also the chi square value based on Bartlett's Test was 2242.947 for dysthymia, 2239.112 for oppositional defiant disorder, 1221.917 for school work problems, 5031.511 for conduct, 1421.1 for anxiety, and 7644.122 for ADHD. Since mentioned values were larger than the chi square critical values (P<0.05), it found that the factor correlation matrix is appropriate for factor analysis. Based on the findings, we can conclude that Wender Utah rating scale can be appropriately used for predicting dysthymia, oppositional defiant disorder, school work problems, conduct disorder, anxiety, in adults with ADHD.

The Swedish version of the Ritvo autism and asperger diagnostic scale: revised (RAADS-R). A validation study of a rating scale for adults.

PubMed

Andersen, Lisa M J; Näswall, Katharina; Manouilenko, Irina; Nylander, Lena; Edgar, Johan; Ritvo, Riva Ariella; Ritvo, Edward; Bejerot, Susanne

2011-12-01

There is a paucity of diagnostic instruments for adults with autism spectrum disorder (ASD). This study evaluates the psychometric properties of the Swedish version of the Ritvo Autism and Asperger Diagnostic Scale-Revised (RAADS-R), an 80-item self-rating scale designed to assist clinicians diagnosing ASD in adults. It was administered to 75 adults with ASD and 197 comparison cases. Also, a subset completed the Autism Spectrum Quotient (AQ). Three out of four subscales had high internal consistency. Sensitivity was 91% and specificity was 93%. The ASD subjects had significantly higher mean scores on all subscales. ASD females had higher scores than ASD males on the sensory motor subscale, a dimension not included in the AQ. RAADS-R showed promising test re-test reliability.

A Stochastic Model of Space-Time Variability of Mesoscale Rainfall: Statistics of Spatial Averages

NASA Technical Reports Server (NTRS)

Kundu, Prasun K.; Bell, Thomas L.

2003-01-01

A characteristic feature of rainfall statistics is that they depend on the space and time scales over which rain data are averaged. A previously developed spectral model of rain statistics that is designed to capture this property, predicts power law scaling behavior for the second moment statistics of area-averaged rain rate on the averaging length scale L as L right arrow 0. In the present work a more efficient method of estimating the model parameters is presented, and used to fit the model to the statistics of area-averaged rain rate derived from gridded radar precipitation data from TOGA COARE. Statistical properties of the data and the model predictions are compared over a wide range of averaging scales. An extension of the spectral model scaling relations to describe the dependence of the average fraction of grid boxes within an area containing nonzero rain (the "rainy area fraction") on the grid scale L is also explored.

Formative Assessment Using Direct Behavior Ratings: Evaluating Intervention Effects of Daily Behavior Report Cards

ERIC Educational Resources Information Center

Sims, Wesley A.; Riley-Tillman, Chris; Cohen, Daniel R.

2017-01-01

This study examined the treatment sensitivity of "Direct Behavior Rating-Single Item Scales" (DBR-SIS) in response to an evidence-based intervention delivered in a single-case, multiple-baseline design. DBR-SIS was used as a formative assessment in conjunction with a frequently used intervention in schools, a Daily Behavior Report Card…

Numeric rating scale: patients' perceptions of its use in postoperative pain assessments.

PubMed

Eriksson, Kerstin; Wikström, Lotta; Årestedt, Kristofer; Fridlund, Bengt; Broström, Anders

2014-02-01

The purpose of this study was to describe how patients perceive the use of the numeric rating scale in postoperative pain assessments. There are recommendations to use a pain scale to follow patients' postoperative pain. Most patients prefer the NRS but there is a discrepancy between patients and healthcare professionals how to interpret the ratings from the pain assessments. A descriptive design with a phenomenographic approach was used. Semi structured interviews were held with 25 patients. Three description categories emerged that illustrate patients' perceptions; use of the NRS facilitated communication of pain, it put demands on healthcare professionals and care routines and it contained interpretation difficulties. The NRS has a place in pain management according to the patients but there is a need for a dialogue to give the patients the opportunity to describe their pain and set a common goal. Copyright © 2014 Elsevier Inc. All rights reserved.

Pre-Stressing Micron-Scale Aluminum Core-Shell Particles to Improve Reactivity

PubMed Central

Levitas, Valery I.; McCollum, Jena; Pantoya, Michelle

2015-01-01

The main direction in increasing reactivity of aluminum (Al) particles for energetic applications is reduction in their size down to nanoscale. However, Al nanoparticles are 30–50 times more expensive than micron scale particles and possess safety and environmental issues. Here, we improved reactivity of Al micron scale particles by synthesizing pre-stressed core-shell structures. Al particles were annealed and quenched to induce compressive stresses in the alumina passivation shell surrounding Al core. This thermal treatment was designed based on predictions of the melt-dispersion mechanism (MDM); a theory describing Al particle reaction under high heating rate. For all anneal treatment temperatures, experimental flame propagation rates for Al combined with nanoscale copper oxide (CuO) are in quantitative agreement with the theoretical predictions based on the MDM. The best treatment increases flame rate by 36% and achieves 68% of that for the best Al nanoparticles. PMID:25597747

Designs for Living and Learning: Transforming Early Childhood Environments, Second Edition

ERIC Educational Resources Information Center

Carter, Margie; Curtis, Deb

2015-01-01

You likely have dreams for your early childhood environment that are greater than rating scales, regulations, and room arrangements. "Designs for Living and Learning" has been a favorite resource among educators and caregivers for more than a decade, and this new edition is packed with even more ideas that can be used as you create…

Is the Parkinson Anxiety Scale comparable across raters?

PubMed

Forjaz, Maria João; Ayala, Alba; Martinez-Martin, Pablo; Dujardin, Kathy; Pontone, Gregory M; Starkstein, Sergio E; Weintraub, Daniel; Leentjens, Albert F G

2015-04-01

The Parkinson Anxiety Scale is a new scale developed to measure anxiety severity in Parkinson's disease specifically. It consists of three dimensions: persistent anxiety, episodic anxiety, and avoidance behavior. This study aimed to assess the measurement properties of the scale while controlling for the rater (self- vs. clinician-rated) effect. The Parkinson Anxiety Scale was administered to a cross-sectional multicenter international sample of 362 Parkinson's disease patients. Both patients and clinicians rated the patient's anxiety independently. A many-facet Rasch model design was applied to estimate and remove the rater effect. The following measurement properties were assessed: fit to the Rasch model, unidimensionality, reliability, differential item functioning, item local independency, interrater reliability (self or clinician), and scale targeting. In addition, test-retest stability, construct validity, precision, and diagnostic properties of the Parkinson Anxiety Scale were also analyzed. A good fit to the Rasch model was obtained for Parkinson Anxiety Scale dimensions A and B, after the removal of one item and rescoring of the response scale for certain items, whereas dimension C showed marginal fit. Self versus clinician rating differences were of small magnitude, with patients reporting higher anxiety levels than clinicians. The linear measure for Parkinson Anxiety Scale dimensions A and B showed good convergent construct with other anxiety measures and good diagnostic properties. Parkinson Anxiety Scale modified dimensions A and B provide valid and reliable measures of anxiety in Parkinson's disease that are comparable across raters. Further studies are needed with dimension C. © 2014 International Parkinson and Movement Disorder Society.

Human Rating the Orion Parachute System

NASA Technical Reports Server (NTRS)

Machin, Ricardo A.; Fisher, Timothy E.; Evans, Carol T.; Stewart, Christine E.

2011-01-01

Human rating begins with design. Converging on the requirements and identifying the risks as early as possible in the design process is essential. Understanding of the interaction between the recovery system and the spacecraft will in large part dictate the achievable reliability of the final design. Component and complete system full-scale flight testing is critical to assure a realistic evaluation of the performance and reliability of the parachute system. However, because testing is so often difficult and expensive, comprehensive analysis of test results and correlation to accurate modeling completes the human rating process. The National Aeronautics and Space Administration (NASA) Orion program uses parachutes to stabilize and decelerate the Crew Exploration Vehicle (CEV) spacecraft during subsonic flight in order to deliver a safe water landing. This paper describes the approach that CEV Parachute Assembly System (CPAS) will take to human rate the parachute recovery system for the CEV.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pierson, L.G.; Witzke, E.L.

This effort studied the integration of innovative methods of key management crypto synchronization, and key agility while scaling encryption speed. Viability of these methods for encryption of ATM cell payloads at the SONET OC- 192 data rate (10 Gb/s), and for operation at OC-48 rates (2.5 Gb/s) was shown. An SNL-Developed pipelined DES design was adapted for the encryption of ATM cells. A proof-of-principle prototype circuit board containing 11 Electronically Programmable Logic Devices (each holding the equivalent of 100,000 gates) was designed, built, and used to prototype a high speed encryptor.

Determination of thermal properties of commercial Ni-MH cells

NASA Astrophysics Data System (ADS)

Darcy, Eric C.

1994-02-01

The test objectives were to evaluate the electrical and thermal performance of commercial Ni-MH cells, evaluate the effectiveness of commercial charge control circuits, assess the abuse tolerance of these cells, and correlate performance and abuse tolerances to cell design via disassembly. Design objectives were to determine which cell designs are most suitable for scale-up and to guide the design of future shuttle and space station based battery chargers. Results, displayed in viewgraph format, include: reflex charging with ICS circuit resulted in premature charge termination; Ni-MH cells appear very tolerant to overcharge at low rates; Enstore's charger is more electrically and thermally efficient at high rates; and Ni-MH cycles much more efficiently than Ni-Cd with the delta-V/delta-t termination.

Determination of thermal properties of commercial Ni-MH cells

NASA Technical Reports Server (NTRS)

Darcy, Eric C.

1994-01-01

The test objectives were to evaluate the electrical and thermal performance of commercial Ni-MH cells, evaluate the effectiveness of commercial charge control circuits, assess the abuse tolerance of these cells, and correlate performance and abuse tolerances to cell design via disassembly. Design objectives were to determine which cell designs are most suitable for scale-up and to guide the design of future shuttle and space station based battery chargers. Results, displayed in viewgraph format, include: reflex charging with ICS circuit resulted in premature charge termination; Ni-MH cells appear very tolerant to overcharge at low rates; Enstore's charger is more electrically and thermally efficient at high rates; and Ni-MH cycles much more efficiently than Ni-Cd with the delta-V/delta-t termination.

Utility of numerical and visual analog scales for evaluating the post-operative pain in rural patients.

PubMed

Mudgalkar, Nikhil; Bele, Samir D; Valsangkar, Sameer; Bodhare, Trupti N; Gorre, Mahipal

2012-11-01

Visual analog scales (VAS) and numeric analog scales (NAS) are used to assess post-operative pain, but few studies indicate their usefulness in rural illiterate population in India. This study was designed to 1) Compare the impact of literacy on the ability to indicate pain rating on VAS and NAS in post-operative rural patients. 2) Assess the level of agreement between the pain scales. Cross sectional, hospital based study. Informed consent was obtained from patients prior to undergoing surgical procedures in a teaching hospital. Post surgery, patients who were conscious and coherent, were asked to rate pain on both VAS and NAS. The pain ratings were obtained within 24 hours of surgery and within 5 minutes of each other. Percentages, chi square test, regression analysis. A total of 105 patients participated in the study. 43 (41%) of the sample was illiterate. 82 (78.1%) were able to rate pain on VAS while 81 (77.1%) were able to rate pain on NAS. There was no significant association between pain ratings and type of surgery, duration of surgery and nature of anaesthesia. In multivariate analysis, age, sex and literacy had no significant association with the ability to rate pain on VAS (P value 0.652, 0.967, 0.328 respectively). Similarly, no significant association was obtained between age, sex and literacy and ability to rate pain on NAS (P value 0.713, 0.405, 0.875 respectively). Correlation coefficient between the scales was 0.693. VAS and NAS can be used interchangeably in Indian rural population as post-operative pain assessment tools irrespective of literacy status.

Evaporatively cooled chiller for solar air conditioning systems design and field test

NASA Astrophysics Data System (ADS)

Merrick, R. H.; Murray, J. G.

1984-06-01

Design changes to improve reliability, part load performance, and manufacturability characteristics of the chiller are focused upon. Low heat flux was achieved by large transfer area allows scale formation without being a thermal barrier: 80 mils = 1 deg. The scaling rate is minimized by keeping surface temperatures below 100 F and a generous water recirculation flow rate. By integrating the cooling tower function into the chiller itself parasitic power consumption was reduced 35%. This system also provided the winter freeze protection without the specific manual shut down procedures required by separate water cooled units and their towers. The severe reduction in cumulative coefficient of performance (COP) due to cycling conditions has been substantially reduced using the spin down control scheme. The major disappointment was the failure to develop a satisfactory inexpensive protective coating. Hot dip galvanizing was demonstrated to be effective but costly, partially due to transportation expense.

Study of neutron generation in the compact tokamak TUMAN-3M in support of a tokamak-based fusion neutron source

NASA Astrophysics Data System (ADS)

Kornev, V. A.; Askinazi, L. G.; Belokurov, A. A.; Chernyshev, F. V.; Lebedev, S. V.; Melnik, A. D.; Shabelsky, A. A.; Tukachinsky, A. S.; Zhubr, N. A.

2017-12-01

The paper presents DD neutron flux measurements in neutron beam injection (NBI) experiments aimed at the optimization of target plasma and heating beam parameters to achieve maximum neutron flux in the TUMAN-3M compact tokamak. Two ion sources of different design were used, which allowed the separation of the beam’s energy and power influence on the neutron rate. Using the database of experiments performed with the two ion sources, an empirical scaling was derived describing the neutron rate dependence on the target plasma and heating beam parameters. Numerical modeling of the neutron rate in the NBI experiments performed using the ASTRA transport code showed good agreement with the scaling.

Progress Monitoring Using Direct Behavior Rating Single Item Scales in a Multiple-Baseline Design Study of the Daily Report Card Intervention

ERIC Educational Resources Information Center

Fabiano, Gregory A.; Pyle, Kellina; Kelty, Mary Bridget; Parham, Brittany R.

2017-01-01

Direct behavior rating (DBR) may be a viable assessment for documenting current areas of impaired functioning and progress monitoring students' response to a behavioral intervention. Challenging behaviors are often addressed in general education settings using interventions such as the daily report card (DRC). To best implement and monitor such…

Full-Scale System for Quantifying Loads and Leak Rates of Seals for Space Applications

NASA Technical Reports Server (NTRS)

Dunlap, Patrick H., Jr.; Steinetz, Bruce M.; Daniels, Christopher C.; Wasowski, Janice L.; Robbie, Malcolm G.; Erker, Arthur H.; Drlik, Gary J.; Mayer, John J.

2010-01-01

NASA is developing advanced space-rated vacuum seals in support of future space exploration missions to low-Earth orbit and other destinations. These seals may be 50 to 60 in. (127 to 152 cm) in diameter and must exhibit extremely low leak rates to ensure that astronauts have sufficient breathable air for extended missions to the International Space Station or the Moon. Seal compression loads must be below prescribed limits so as not to overload the mechanisms that compress them during docking or mating, and seal adhesion forces must be low to allow two mated systems to separate when required. NASA Glenn Research Center has developed a new test apparatus to measure leak rates and compression and adhesion loads of candidate full-scale seals under simulated thermal, vacuum, and engagement conditions. Tests can be performed in seal-on-seal or seal-on-flange configurations at temperatures from -76 to 140 F (-60 to 60 C) under operational pressure gradients. Nominal and off-nominal mating conditions (e.g., incomplete seal compression) can also be simulated. This paper describes the main design features of the test apparatus as well as techniques used to overcome some of the design challenges.

Assessment of personality-related levels of functioning: a pilot study of clinical assessment of the DSM-5 level of personality functioning based on a semi-structured interview.

PubMed

Thylstrup, Birgitte; Simonsen, Sebastian; Nemery, Caroline; Simonsen, Erik; Noll, Jane Fjernestad; Myatt, Mikkel Wanting; Hesse, Morten

2016-08-25

The personality disorder categories in the Diagnostic and Statistical Manual of Mental Disorders IV have been extensively criticized, and there is a growing consensus that personality pathology should be represented dimensionally rather than categorically. The aim of this pilot study was to test the Clinical Assessment of the Level of Personality Functioning Scale, a semi-structured clinical interview, designed to assess the Level of Personality Functioning Scale of the DSM-5 (Section III) by applying strategies similar to what characterizes assessments in clinical practice. The inter-rater reliability of the assessment of the four domains and the total impairment in the Level of Personality Functioning Scale were measured in a patient sample that varied in terms of severity and type of pathology. Ratings were done independently by the interviewer and two experts who watched a videotaped Clinical Assessment of the Level of Personality Functioning Scale interview. Inter-rater reliability coefficients varied between domains and were not sufficient for clinical practice, but may support the use of the interview to assess the dimensions of personality functioning for research purposes. While designed to measure the Level of Personality Functioning Scale with a high degree of similarity to clinical practice, the Clinical Assessment of the Level of Personality Functioning Scale had weak reliabilities and a rating based on a single interview should not be considered a stand-alone assessment of areas of functioning for a given patient.

Evaluation of the effect of Spiritual care on patients with generalized anxiety and depression: a randomized controlled study.

PubMed

Sankhe, A; Dalal, K; Save, D; Sarve, P

2017-12-01

The present study was conducted to assess the effect of spiritual care in patients with depression, anxiety or both in a randomized controlled design. The participants were randomized either to receive spiritual care or not and Hamilton anxiety rating scale-A (HAM-A), Hamilton depression rating scale-D (HAM-D), WHO-quality of life-Brief (WHOQOL-BREF) and Functional assessment of chronic illness therapy - Spiritual well-being (FACIT-Sp) were assessed before therapy and two follow-ups at 3 and 6 week. However, with regard to the spiritual care therapy group, statistically significant differences were observed in both HAM-A and HAM-D scales between the baseline and visit 2 (p < 0.001), thus significantly reducing symptoms of anxiety and depression, respectively. No statistically significant differences were observed for any of the scales during the follow-up periods for the control group of participants. When the scores were compared between the study groups, HAM-A, HAM-D and FACIT-Sp 12 scores were significantly lower in the interventional group as compared to the control group at both third and sixth weeks. This suggests a significant improvement in symptoms of anxiety and depression in the spiritual care therapy group than the control group; however, large randomized controlled trials with robust design are needed to confirm the same.

An Observational Study for Evaluating the Effects of Interpersonal Problem-Solving Skills Training on Behavioural Dimensions

ERIC Educational Resources Information Center

Anliak, Sakire; Sahin, Derya

2010-01-01

The present observational study was designed to evaluate the effectiveness of the I Can Problem Solve (ICPS) programme on behavioural change from aggression to pro-social behaviours by using the DECB rating scale. Non-participant observation method was used to collect data in pretest-training-posttest design. It was hypothesised that the ICPS…

Design of a sensor network for structural health monitoring of a full-scale composite horizontal tail

NASA Astrophysics Data System (ADS)

Gao, Dongyue; Wang, Yishou; Wu, Zhanjun; Rahim, Gorgin; Bai, Shengbao

2014-05-01

The detection capability of a given structural health monitoring (SHM) system strongly depends on its sensor network placement. In order to minimize the number of sensors while maximizing the detection capability, optimal design of the PZT sensor network placement is necessary for structural health monitoring (SHM) of a full-scale composite horizontal tail. In this study, the sensor network optimization was simplified as a problem of determining the sensor array placement between stiffeners to achieve the desired the coverage rate. First, an analysis of the structural layout and load distribution of a composite horizontal tail was performed. The constraint conditions of the optimal design were presented. Then, the SHM algorithm of the composite horizontal tail under static load was proposed. Based on the given SHM algorithm, a sensor network was designed for the full-scale composite horizontal tail structure. Effective profiles of cross-stiffener paths (CRPs) and uncross-stiffener paths (URPs) were estimated by a Lamb wave propagation experiment in a multi-stiffener composite specimen. Based on the coverage rate and the redundancy requirements, a seven-sensor array-network was chosen as the optimal sensor network for each airfoil. Finally, a preliminary SHM experiment was performed on a typical composite aircraft structure component. The reliability of the SHM result for a composite horizontal tail structure under static load was validated. In the result, the red zone represented the delamination damage. The detection capability of the optimized sensor network was verified by SHM of a full-scale composite horizontal tail; all the diagnosis results were obtained in two minutes. The result showed that all the damage in the monitoring region was covered by the sensor network.

Psychometric properties of an instrument to measure nursing students' quality of life.

PubMed

Chu, Yanxiang; Xu, Min; Li, Xiuyun

2015-07-01

It is important for clinical nursing teachers and managers to recognize the importance of nursing students' quality of life (QOL) since they are the source of future nurses. As yet, there is no quality of life evaluation scale (QOLES) specific to them. This study designed a quantitative instrument for evaluating QOL of nursing students. The study design was a descriptive survey with mixed methods including literature review, panel discussion, Delphi method, and statistical analysis. The data were collected from 880 nursing students from four teaching hospitals in Wuhan, China. The reliability and validity of the scale were tested through completion of the QOLES in a cluster sampling method. The total scale included 18 items in three domains: physical, psychological, and social functional. The cumulative contributing rate of the three common factors was 65.23%. Cronbach's alpha coefficient of the scale was 0.82. This scale had good reliability and validity to evaluate nursing students' QOL. Copyright © 2015 Elsevier Ltd. All rights reserved.

A real-time multi-scale 2D Gaussian filter based on FPGA

NASA Astrophysics Data System (ADS)

Luo, Haibo; Gai, Xingqin; Chang, Zheng; Hui, Bin

2014-11-01

Multi-scale 2-D Gaussian filter has been widely used in feature extraction (e.g. SIFT, edge etc.), image segmentation, image enhancement, image noise removing, multi-scale shape description etc. However, their computational complexity remains an issue for real-time image processing systems. Aimed at this problem, we propose a framework of multi-scale 2-D Gaussian filter based on FPGA in this paper. Firstly, a full-hardware architecture based on parallel pipeline was designed to achieve high throughput rate. Secondly, in order to save some multiplier, the 2-D convolution is separated into two 1-D convolutions. Thirdly, a dedicate first in first out memory named as CAFIFO (Column Addressing FIFO) was designed to avoid the error propagating induced by spark on clock. Finally, a shared memory framework was designed to reduce memory costs. As a demonstration, we realized a 3 scales 2-D Gaussian filter on a single ALTERA Cyclone III FPGA chip. Experimental results show that, the proposed framework can computing a Multi-scales 2-D Gaussian filtering within one pixel clock period, is further suitable for real-time image processing. Moreover, the main principle can be popularized to the other operators based on convolution, such as Gabor filter, Sobel operator and so on.

Conflicting Selection Pressures Will Constrain Viral Escape from Interfering Particles: Principles for Designing Resistance-Proof Antivirals.

PubMed

Rast, Luke I; Rouzine, Igor M; Rozhnova, Ganna; Bishop, Lisa; Weinberger, Ariel D; Weinberger, Leor S

2016-05-01

The rapid evolution of RNA-encoded viruses such as HIV presents a major barrier to infectious disease control using conventional pharmaceuticals and vaccines. Previously, it was proposed that defective interfering particles could be developed to indefinitely control the HIV/AIDS pandemic; in individual patients, these engineered molecular parasites were further predicted to be refractory to HIV's mutational escape (i.e., be 'resistance-proof'). However, an outstanding question has been whether these engineered interfering particles-termed Therapeutic Interfering Particles (TIPs)-would remain resistance-proof at the population-scale, where TIP-resistant HIV mutants may transmit more efficiently by reaching higher viral loads in the TIP-treated subpopulation. Here, we develop a multi-scale model to test whether TIPs will maintain indefinite control of HIV at the population-scale, as HIV ('unilaterally') evolves toward TIP resistance by limiting the production of viral proteins available for TIPs to parasitize. Model results capture the existence of two intrinsic evolutionary tradeoffs that collectively prevent the spread of TIP-resistant HIV mutants in a population. First, despite their increased transmission rates in TIP-treated sub-populations, unilateral TIP-resistant mutants are shown to have reduced transmission rates in TIP-untreated sub-populations. Second, these TIP-resistant mutants are shown to have reduced growth rates (i.e., replicative fitness) in both TIP-treated and TIP-untreated individuals. As a result of these tradeoffs, the model finds that TIP-susceptible HIV strains continually outcompete TIP-resistant HIV mutants at both patient and population scales when TIPs are engineered to express >3-fold more genomic RNA than HIV expresses. Thus, the results provide design constraints for engineering population-scale therapies that may be refractory to the acquisition of antiviral resistance.

dV/dt - Accelerating the Rate of Progress towards Extreme Scale Collaborative Science

DOE Office of Scientific and Technical Information (OSTI.GOV)

Livny, Miron

This report introduces publications that report the results of a project that aimed to design a computational framework that enables computational experimentation at scale while supporting the model of “submit locally, compute globally”. The project focuses on estimating application resource needs, finding the appropriate computing resources, acquiring those resources,deploying the applications and data on the resources, managing applications and resources during run.

A quasi-Newton algorithm for large-scale nonlinear equations.

PubMed

Huang, Linghua

2017-01-01

In this paper, the algorithm for large-scale nonlinear equations is designed by the following steps: (i) a conjugate gradient (CG) algorithm is designed as a sub-algorithm to obtain the initial points of the main algorithm, where the sub-algorithm's initial point does not have any restrictions; (ii) a quasi-Newton algorithm with the initial points given by sub-algorithm is defined as main algorithm, where a new nonmonotone line search technique is presented to get the step length [Formula: see text]. The given nonmonotone line search technique can avoid computing the Jacobian matrix. The global convergence and the [Formula: see text]-order convergent rate of the main algorithm are established under suitable conditions. Numerical results show that the proposed method is competitive with a similar method for large-scale problems.

Simplified Summative Temporal Bone Dissection Scale Demonstrates Equivalence to Existing Measures.

PubMed

Pisa, Justyn; Gousseau, Michael; Mowat, Stephanie; Westerberg, Brian; Unger, Bert; Hochman, Jordan B

2018-01-01

Emphasis on patient safety has created the need for quality assessment of fundamental surgical skills. Existing temporal bone rating scales are laborious, subject to evaluator fatigue, and contain inconsistencies when conferring points. To address these deficiencies, a novel binary assessment tool was designed and validated against a well-established rating scale. Residents completed a mastoidectomy with posterior tympanotomy on identical 3D-printed temporal bone models. Four neurotologists evaluated each specimen using a validated scale (Welling) and a newly developed "CanadaWest" scale, with scoring repeated after a 4-week interval. Nineteen participants were clustered into junior, intermediate, and senior cohorts. An ANOVA found significant differences between performance of the junior-intermediate and junior-senior cohorts for both Welling and CanadaWest scales ( P < .05). Neither scale found a significant difference between intermediate-senior resident performance ( P > .05). Cohen's kappa found strong intrarater reliability (0.711) with a high degree of interrater reliability of (0.858) for the CanadaWest scale, similar to scores on the Welling scale of (0.713) and (0.917), respectively. The CanadaWest scale was facile and delineated performance by experience level with strong intrarater reliability. Comparable to the validated Welling Scale, it distinguished junior from senior trainees but was challenged in differentiating intermediate and senior trainee performance.

Comparison of the 1D flux theory with a 2D hydrodynamic secondary settling tank model.

PubMed

Ekama, G A; Marais, P

2004-01-01

The applicability of the 1D idealized flux theory (1DFT) for design of secondary settling tanks (SSTs) is evaluated by comparing its predicted maximum surface overflow (SOR) and solids loading (SLR) rates with that calculated from the 2D hydrodynamic model SettlerCAD using as a basis 35 full scale SST stress tests conducted on different SSTs with diameters from 30 to 45m and 2.25 to 4.1 m side water depth, with and without Stamford baffles. From the simulations, a relatively consistent pattern appeared, i.e. that the 1DFT can be used for design but its predicted maximum SLR needs to be reduced by an appropriate flux rating, the magnitude of which depends mainly on SST depth and hydraulic loading rate (HLR). Simulations of the sloping bottom shallow (1.5-2.5 m SWD) Dutch SSTs tested by STOWa and the Watts et al. SST, all with doubled SWDs, and the Darvill new (4.1 m) and old (2.5 m) SSTs with interchanged depths, were run to confirm the sensitivity of the flux rating to depth and HLR. Simulations with and without a Stamford baffle were also done. While the design of the internal features of the SST, such as baffling, have a marked influence on the effluent SS concentration for underloaded SSTs, these features appeared to have only a small influence on the flux rating, i.e. capacity, of the SST, In the meantime until more information is obtained, it would appear that from the simulations so far that the flux rating of 0.80 of the 1DFT maximum SLR recommended by Ekama and Marais remains a reasonable value to apply in the design of full scale SSTs--for deep SSTs (4 m SWD) the flux rating could be increased to 0.85 and for shallow SSTs (2.5 m SWD) decreased to 0.75. It is recommended that (i) while the apparent interrelationship between SST flux rating and depth suggests some optimization of the volume of the SST, that this be avoided and that (ii) the depth of the SST be designed independently of the surface area as is usually the practice and once selected, the appropriate flux rating is applied to the 1DFT estimate of the surface area.

Dysautonomia rating scales in Parkinson's disease: sialorrhea, dysphagia, and constipation--critique and recommendations by movement disorders task force on rating scales for Parkinson's disease.

PubMed

Evatt, Marian L; Chaudhuri, K Ray; Chou, Kelvin L; Cubo, Ester; Hinson, Vanessa; Kompoliti, Katie; Yang, Chengwu; Poewe, Werner; Rascol, Olivier; Sampaio, Cristina; Stebbins, Glenn T; Goetz, Christopher G

2009-04-15

Upper and lower gastrointestinal dysautonomia symptoms (GIDS)--sialorrhea, dysphagia, and constipation are common in Parkinson's disease (PD) and often socially as well as physically disabling for patients. Available invasive quantitative measures for assessing these symptoms and their response to therapy are time-consuming, require specialized equipment, can cause patient discomfort and present patients with risk. The Movement Disorders Society commissioned a task force to assess available clinical rating scales, critique their clinimetric properties, and make recommendations regarding their clinical utility. Six clinical researchers and a biostatistician systematically searched the literature for scales of sialorrhea, dysphagia, and constipation, evaluated the scales' previous use, performance parameters, and quality of validation data (if available). A scale was designated "Recommended" if the scale was used in clinical studies beyond the group that developed it, has been specifically used in PD reports, and clinimetric studies have established that it is a valid, reliable, and sensitive. "Suggested" scales met at least part of the above criteria, but fell short of meeting all. Based on the systematic review, scales for individual symptoms of sialorrhea, dysphagia, and constipation were identified along with three global scales that include these symptoms in the context of assessing dysautonomia or nonmotor symptoms. Three sialorrhea scales met criteria for Suggested: Drooling Severity and Frequency Scale (DSFS), Drooling Rating Scale, and Sialorrhea Clinical Scale for PD (SCS-PD). Two dysphagia scales, the Swallowing Disturbance Questionnaire (SDQ) and Dysphagia-Specific Quality of Life (SWAL-QOL), met criteria for Suggested. Although Rome III constipation module is widely accepted in the gastroenterology community, and the earlier version from the Rome II criteria has been used in a single study of PD patients, neither met criteria for Suggested or Recommended. Among the global scales, the Scales for Outcomes in PD-Autonomic (SCOPA-AUT) and Nonmotor Symptoms Questionnaire for PD (NMSQuest) both met criteria for Recommended, and the Nonmotor Symptoms Scale (NMSS) met criteria for Suggested; however, none specifically focuses on the target gastrointestinal symptoms (sialorrhea, dysphagia, and constipation) of this report. A very small number of rating scales have been applied to studies of gastrointestinal-related dysautonomia in PD. Only two scales met "Recommended" criteria and neither focuses specifically on the symptoms of sialorrhea, dysphagia, and constipation. Further scale testing in PD among the scales that focus on these symptoms is warranted, and no new scales are needed until the available scales are fully tested clinimetrically.

Optimization of the inter-tablet coating uniformity for an active coating process at lab and pilot scale.

PubMed

Just, Sarah; Toschkoff, Gregor; Funke, Adrian; Djuric, Dejan; Scharrer, Georg; Khinast, Johannes; Knop, Klaus; Kleinebudde, Peter

2013-11-30

The objective of this study was to enhance the inter-tablet coating uniformity in an active coating process at lab and pilot scale by statistical design of experiments. The API candesartan cilexetil was applied onto gastrointestinal therapeutic systems containing the API nifedipine to obtain fixed dose combinations of these two drugs with different release profiles. At lab scale, the parameters pan load, pan speed, spray rate and number of spray nozzles were examined. At pilot scale, the parameters pan load, pan speed, spray rate, spray time, and spray pressure were investigated. A low spray rate and a high pan speed improved the coating uniformity at both scales. The number of spray nozzles was identified as the most influential variable at lab scale. With four spray nozzles, the highest CV value was equal to 6.4%, compared to 13.4% obtained with two spray nozzles. The lowest CV of 4.5% obtained with two spray nozzles was further reduced to 2.3% when using four spray nozzles. At pilot scale, CV values between 2.7% and 11.1% were achieved. Since the test of uniformity of dosage units accepts CV values of up to 6.25%, this active coating process is well suited to comply with the pharmacopoeial requirements. Copyright © 2013 Elsevier B.V. All rights reserved.

Embitterment in War Veterans with Posttraumatic Stress Disorder.

PubMed

Sabic, Dzevad; Sabic, Adela; Batic-Mujanovic, Olivera

2018-04-01

The aim of this study was to analyze frequency of embitterment in war veterans with Posttraumatic stress disorder (PTSD). It was analyzed 174 subjects (from Health Center Zivinice/ Mental Health Center) through a survey conducted in the period from March 2015 to June 2016, of witch 87 war veterans with PTSD and control subjects 87 war veterans without PTSD. The primary outcome measure was the Post-Traumatic Embitterment Disorder Self-Rating Scale (PTED Scale) who contains 19 items designed to assess features of embitterment reactions to negative life events. Secondary efficacy measures included the Clinician-Administered PTSD Scale - V (CAPS), the PTSD CheckList (PCL), the Combat Exposure Scale (CES), the Hamilton Depression Rating Scale (HAM-D), the Hamilton Anxiety Rating Scale (HAM-A) and the World Health Organization Quality of Life Scale ( WHOQOL-Bref). All subjects were male. The average age of patients in the group war veterans with PTSD was 52·78 ± 5·99. In the control group average age was 51·42 ± 5·98. Statistical data were analyzed in SPSS statistical program. Comparing the results, t tests revealed significant difference between group veterans with PTSD and control group (t=-21·216, p<0·0001). War veterans group with PTSD (X= 51·41 SD= 8·91), war veterans without PTSD (X=14·39, SD=13·61). Embitterment is frequent in war veterans with PTSD.

Space shuttle maneuvering engine reusable thrust chamber program. Task 11: Stability analyses and acoustic model testing data dump

NASA Technical Reports Server (NTRS)

Oberg, C. L.

1974-01-01

The combustion stability characteristics of engines applicable to the Space Shuttle Orbit Maneuvering System and the adequacy of acoustic cavities as a means of assuring stability in these engines were investigated. The study comprised full-scale stability rating tests, bench-scale acoustic model tests and analysis. Two series of stability rating tests were made. Acoustic model tests were made to determine the resonance characteristics and effects of acoustic cavities. Analytical studies were done to aid design of the cavity configurations to be tested and, also, to aid evaluation of the effectiveness of acoustic cavities from available test results.

Results of tests of a Rockwell International space shuttle orbiter (-139 configuration) 0.0175-scale model (no. 29-0) in AEDC tunnel F to determine hypersonic heating effects (OH11)

NASA Technical Reports Server (NTRS)

Quan, M.

1975-01-01

Results from wind tunnel tests to determine hypersonic aerodynamic heating rates on a NASA/Rockwell Space Shuttle Orbiter are reported. The tests were to determine Mach number effects, if any, and to obtain overall heating rate data at high Mach numbers from 10.5 to 16. The model used was a 0.0175-scale model built to Rockwell Orbiter lines VL70-000139. The model identity number is 29-0. These tests, designated OH11, were conducted in the AEDC Tunnel F.

Rainfall From Resolved Rather Than Parameterized Processes Better Represents the Present-Day and Climate Change Response of Moderate Rates in the Community Atmosphere Model

DOE PAGES

Kooperman, Gabriel J.; Pritchard, Michael S.; O'Brien, Travis A.; ...

2018-04-01

Deficiencies in the parameterizations of convection used in global climate models often lead to a distorted representation of the simulated rainfall intensity distribution (i.e., too much rainfall from weak rain rates). While encouraging improvements in high percentile rainfall intensity have been found as the horizontal resolution of the Community Atmosphere Model is increased to ~25 km, we demonstrate no corresponding improvement in the moderate rain rates that generate the majority of accumulated rainfall. Using a statistical framework designed to emphasize links between precipitation intensity and accumulated rainfall beyond just the frequency distribution, we show that CAM cannot realistically simulate moderatemore » rain rates, and cannot capture their intensification with climate change, even as resolution is increased. However, by separating the parameterized convective and large-scale resolved contributions to total rainfall, we find that the intensity, geographic pattern, and climate change response of CAM's large-scale rain rates are more consistent with observations (TRMM 3B42), superparameterization, and theoretical expectations, despite issues with parameterized convection. Increasing CAM's horizontal resolution does improve the representation of total rainfall intensity, but not due to changes in the intensity of large-scale rain rates, which are surprisingly insensitive to horizontal resolution. Rather, improvements occur through an increase in the relative contribution of the large-scale component to the total amount of accumulated rainfall. Analysis of sensitivities to convective timescale and entrainment rate confirm the importance of these parameters in the possible development of scale-aware parameterizations, but also reveal unrecognized trade-offs from the entanglement of precipitation frequency and total amount.« less

Rainfall From Resolved Rather Than Parameterized Processes Better Represents the Present-Day and Climate Change Response of Moderate Rates in the Community Atmosphere Model

NASA Astrophysics Data System (ADS)

Kooperman, Gabriel J.; Pritchard, Michael S.; O'Brien, Travis A.; Timmermans, Ben W.

2018-04-01

Deficiencies in the parameterizations of convection used in global climate models often lead to a distorted representation of the simulated rainfall intensity distribution (i.e., too much rainfall from weak rain rates). While encouraging improvements in high percentile rainfall intensity have been found as the horizontal resolution of the Community Atmosphere Model is increased to ˜25 km, we demonstrate no corresponding improvement in the moderate rain rates that generate the majority of accumulated rainfall. Using a statistical framework designed to emphasize links between precipitation intensity and accumulated rainfall beyond just the frequency distribution, we show that CAM cannot realistically simulate moderate rain rates, and cannot capture their intensification with climate change, even as resolution is increased. However, by separating the parameterized convective and large-scale resolved contributions to total rainfall, we find that the intensity, geographic pattern, and climate change response of CAM's large-scale rain rates are more consistent with observations (TRMM 3B42), superparameterization, and theoretical expectations, despite issues with parameterized convection. Increasing CAM's horizontal resolution does improve the representation of total rainfall intensity, but not due to changes in the intensity of large-scale rain rates, which are surprisingly insensitive to horizontal resolution. Rather, improvements occur through an increase in the relative contribution of the large-scale component to the total amount of accumulated rainfall. Analysis of sensitivities to convective timescale and entrainment rate confirm the importance of these parameters in the possible development of scale-aware parameterizations, but also reveal unrecognized trade-offs from the entanglement of precipitation frequency and total amount.

Rainfall From Resolved Rather Than Parameterized Processes Better Represents the Present-Day and Climate Change Response of Moderate Rates in the Community Atmosphere Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kooperman, Gabriel J.; Pritchard, Michael S.; O'Brien, Travis A.

Deficiencies in the parameterizations of convection used in global climate models often lead to a distorted representation of the simulated rainfall intensity distribution (i.e., too much rainfall from weak rain rates). While encouraging improvements in high percentile rainfall intensity have been found as the horizontal resolution of the Community Atmosphere Model is increased to ~25 km, we demonstrate no corresponding improvement in the moderate rain rates that generate the majority of accumulated rainfall. Using a statistical framework designed to emphasize links between precipitation intensity and accumulated rainfall beyond just the frequency distribution, we show that CAM cannot realistically simulate moderatemore » rain rates, and cannot capture their intensification with climate change, even as resolution is increased. However, by separating the parameterized convective and large-scale resolved contributions to total rainfall, we find that the intensity, geographic pattern, and climate change response of CAM's large-scale rain rates are more consistent with observations (TRMM 3B42), superparameterization, and theoretical expectations, despite issues with parameterized convection. Increasing CAM's horizontal resolution does improve the representation of total rainfall intensity, but not due to changes in the intensity of large-scale rain rates, which are surprisingly insensitive to horizontal resolution. Rather, improvements occur through an increase in the relative contribution of the large-scale component to the total amount of accumulated rainfall. Analysis of sensitivities to convective timescale and entrainment rate confirm the importance of these parameters in the possible development of scale-aware parameterizations, but also reveal unrecognized trade-offs from the entanglement of precipitation frequency and total amount.« less

Dysautonomia Rating Scales in Parkinson’s Disease: Sialorrhea, Dysphagia, and Constipation—Critique and Recommendations by Movement Disorders Task Force on Rating Scales for Parkinson’s Disease

PubMed Central

Evatt, Marian L.; Chaudhuri, K. Ray; Chou, Kelvin L.; Cubo, Ester; Hinson, Vanessa; Kompoliti, Katie; Yang, Chengwu; Poewe, Werner; Rascol, Olivier; Sampaio, Cristina; Stebbins, Glenn T.; Goetz, Christopher G.

2015-01-01

Upper and lower gastrointestinal dysautonomia symptoms (GIDS)—sialorrhea, dysphagia, and constipation are common in Parkinson’s disease (PD) and often socially as well as physically disabling for patients. Available invasive quantitative measures for assessing these symptoms and their response to therapy are time-consuming, require specialized equipment, can cause patient discomfort and present patients with risk. The Movement Disorders Society commissioned a task force to assess available clinical rating scales, critique their clinimetric properties, and make recommendations regarding their clinical utility. Six clinical researchers and a biostatistician systematically searched the literature for scales of sialorrhea, dysphagia, and constipation, evaluated the scales’ previous use, performance parameters, and quality of validation data (if available). A scale was designated “Recommended” if the scale was used in clinical studies beyond the group that developed it, has been specifically used in PD reports, and clinimetric studies have established that it is a valid, reliable, and sensitive. “Suggested” scales met at least part of the above criteria, but fell short of meeting all. Based on the systematic review, scales for individual symptoms of sialorrhea, dysphagia, and constipation were identified along with three global scales that include these symptoms in the context of assessing dysautonomia or nonmotor symptoms. Three sialorrhea scales met criteria for Suggested: Drooling Severity and Frequency Scale (DSFS), Drooling Rating Scale, and Sialorrhea Clinical Scale for PD (SCS-PD). Two dysphagia scales, the Swallowing Disturbance Questionnaire (SDQ) and Dysphagia-Specific Quality of Life (SWAL-QOL), met criteria for Suggested. Although Rome III constipation module is widely accepted in the gastroenterology community, and the earlier version from the Rome II criteria has been used in a single study of PD patients, neither met criteria for Suggested or Recommended. Among the global scales, the Scales for Outcomes in PD-Autonomic (SCOPA-AUT) and Nonmotor Symptoms Questionnaire for PD (NMSQuest) both met criteria for Recommended, and the Nonmotor Symptoms Scale (NMSS) met criteria for Suggested; however, none specifically focuses on the target gastrointestinal symptoms (sialorrhea, dysphagia, and constipation) of this report. A very small number of rating scales have been applied to studies of gastrointestinal-related dysautonomia in PD. Only two scales met “Recommended” criteria and neither focuses specifically on the symptoms of sialorrhea, dysphagia, and constipation. Further scale testing in PD among the scales that focus on these symptoms is warranted, and no new scales are needed until the available scales are fully tested clinimetrically. PMID:19205066

An Experimental Study on Burning Characteristics of n-Heptane/Ethanol Mixture Pool Fires in a Reduced Scaled Tunnel

NASA Astrophysics Data System (ADS)

Yozgatligil, Ahmet; Shafee, Sina

2016-11-01

Fire accidents in recent decades have drawn attention to safety issues associated with the design, construction and maintenance of tunnels. A reduced scale tunnel model constructed based on Froude scaling technique is used in the current work. Mixtures of n-heptane and ethanol are burned with ethanol volumetric fraction up to 30 percent and the longitudinal ventilation velocity varying from 0.5 to 2.5 m/s. The burning rates of the pool fires are measured using a precision load cell. The heat release rates of the fires are calculated according to oxygen calorimetry method and the temperature distributions inside the tunnel are also measured. Results of the experiments show that the ventilation velocity variation has a significant effect on the pool fire burning rate, smoke temperature and the critical ventilation velocity. With increased oxygen depletion in case of increased ethanol content of blended pool fires, the quasi-steady heat release rate values tend to increase as well as the ceiling temperatures while the combustion duration decreases.

Liquid Motion Experiment Flight Test Results

NASA Technical Reports Server (NTRS)

Chato David J.; Dalton, Penni J.; Dodge, Franklin T.; Green, Steve

1998-01-01

The Liquid Motion Experiment (LME), designed to study the effects of liquid motion in rotating tanks, was flown on STS 84. LME was essentially a spin table that created a realistic nutation motion of scale-model tanks containing liquid. TWo spherical and two cylindrical transparent tanks were tested simultaneously, and three sets of such tanks were employed to vary liquid viscosity, fill level, and propellant management device (PMD) design. All the tanks were approximately 4.5 inches diameter. The primary test measurements were the radial and tangential torques exerted on the tanks by the liquid. Resonant frequencies and damping of the liquid oscillations were determined by sine sweep tests. For a given tank shape, the resonant frequency depended on fill level. For the cylindrical tanks, the resonances had somewhat different frequencies for the tangential axis (0.55 to 0.75 times spin rate) and the radial axis (0.73 to 0.78 times spin rate), and the tangential axis resonance agreed more closely with available analytical models. For the spherical tanks, the resonant frequencies were between 0.74 to 0.77 times the spin rate and were the same for the tangential and radial axes. The damping coefficients varied from about I% to 3% of critical, depending on tank shape, fill level, and liquid viscosity. 'Me viscous energy dissipation rates of the liquid oscillations were determined from sine dwell tests. The LME energy dissipation rates varied from 0.3 to 0.5 times the estimates obtained from scaling previous ground tests and spacecraft flight data. The PNDs sometimes enhanced the resonances and energy dissipation rates and sometimes decreased them, which points out the need to understand better the effects of PMD on liquid motion as a function of PMD and tank design.

Multi-Scale Effects in the Strength of Ceramics

PubMed Central

Cook, Robert F.

2016-01-01

Multiple length-scale effects are demonstrated in indentation-strength measurements of a range of ceramic materials under inert and reactive conditions. Meso-scale effects associated with flaw disruption by lateral cracking at large indentation loads are shown to increase strengths above the ideal indentation response. Micro-scale effects associated with toughening by microstructural restraints at small indentation loads are shown to decrease strengths below the ideal response. A combined meso-micro-scale analysis is developed that describes ceramic inert strength behaviors over the complete indentation flaw size range. Nano-scale effects associated with chemical equilibria and crack velocity thresholds are shown to lead to invariant minimum strengths at slow applied stressing rates under reactive conditions. A combined meso-micro-nano-scale analysis is developed that describes the full range of reactive and inert strength behaviors as a function of indentation load and applied stressing rate. Applications of the multi-scale analysis are demonstrated for materials design, materials selection, toughness determination, crack velocity determination, bond-rupture parameter determination, and prediction of reactive strengths. The measurements and analysis provide strong support for the existence of sharp crack tips in ceramics such that the nano-scale mechanisms of discrete bond rupture are separate from the larger scale crack driving force mechanics characterized by continuum-based stress-intensity factors. PMID:27563150

Electrokinetic remediation prefield test methods

NASA Technical Reports Server (NTRS)

Hodko, Dalibor (Inventor)

2000-01-01

Methods for determining the parameters critical in designing an electrokinetic soil remediation process including electrode well spacing, operating current/voltage, electroosmotic flow rate, electrode well wall design, and amount of buffering or neutralizing solution needed in the electrode wells at operating conditions are disclosed These methods are preferably performed prior to initiating a full scale electrokinetic remediation process in order to obtain efficient remediation of the contaminants.

Experimental investigation of fuel regression rate in a HTPB based lab-scale hybrid rocket motor

NASA Astrophysics Data System (ADS)

Li, Xintian; Tian, Hui; Yu, Nanjia; Cai, Guobiao

2014-12-01

The fuel regression rate is an important parameter in the design process of the hybrid rocket motor. Additives in the solid fuel may have influences on the fuel regression rate, which will affect the internal ballistics of the motor. A series of firing experiments have been conducted on lab-scale hybrid rocket motors with 98% hydrogen peroxide (H2O2) oxidizer and hydroxyl terminated polybutadiene (HTPB) based fuels in this paper. An innovative fuel regression rate analysis method is established to diminish the errors caused by start and tailing stages in a short time firing test. The effects of the metal Mg, Al, aromatic hydrocarbon anthracene (C14H10), and carbon black (C) on the fuel regression rate are investigated. The fuel regression rate formulas of different fuel components are fitted according to the experiment data. The results indicate that the influence of C14H10 on the fuel regression rate of HTPB is not evident. However, the metal additives in the HTPB fuel can increase the fuel regression rate significantly.

Interpreting the handling qualities of aircraft with stability and control augmentation

NASA Technical Reports Server (NTRS)

Hodgkinson, J.; Potsdam, E. H.; Smith, R. E.

1990-01-01

The general process of designing an aircraft for good flying qualities is first discussed. Lessons learned are pointed out, with piloted evaluation emerging as a crucial element. Two sources of rating variability in performing these evaluations are then discussed. First, the finite endpoints of the Cooper-Harper scale do not bias parametric statistical analyses unduly. Second, the wording of the scale does introduce some scatter. Phase lags generated by augmentation systems, as represented by equivalent time delays, often cause poor flying qualities. An analysis is introduced which allows a designer to relate any level of time delay to a probability of loss of aircraft control. This view of time delays should, it is hoped, allow better visibility of the time delays in the design process.

Design and Processing of Electret Structures

DTIC Science & Technology

2009-10-31

and width as a function of time. ( d ) Estimated current density j of dissolving copper disk as a function of time. (e) Total current I of dissolving...effect leading to a higher corrosion rate in the galvanic microreactor . Because of the small scale of our galvanic system, the dissolving copper disk is...estimated by focusing with a calibrated microscope stage.   Figure 5: Particle separation and electrolyte convection. Scale bars in ( A , D ) are 100 µm

Measuring impairment when diagnosing adolescent ADHD: Differentiating problems due to ADHD versus other sources.

PubMed

Vazquez, Alejandro L; H Sibley, Margaret; Campez, Mileini

2018-06-01

The DSM-5 requires clinicians to link ADHD symptoms to clinically meaningful impairments in daily life functioning. Measuring impairment during ADHD assessments may be particularly challenging in adolescence, when ADHD is often not the sole source of a youth's difficulties. Existing impairment rating scales are criticized for not specifying ADHD as the source of impairment in their instructions, leading to potential problems with rating scale specificity. The current study utilized a within subjects design (N = 107) to compare parent report of impairment on two versions of a global impairment measure: one that specified ADHD as the source of impairment (Impairment Rating Scale-ADHD) and a standard version that did not (Impairment Rating Scale). On the standard family impairment item, parents endorsed greater impairment as compared to the IRS-ADHD. This finding was particularly pronounced when parents reported high levels of parenting stress. More severe ADHD symptoms were associated with greater concordance between the two versions. Findings indicate that adolescent family related impairments reported during ADHD assessments may be due to sources other than ADHD symptoms, such as developmental maladjustment. To prevent false positive diagnoses, symptom-specific wording may optimize impairment measures when assessing family functioning in diagnostic assessments for adolescents with ADHD. Copyright © 2018 Elsevier B.V. All rights reserved.

Heart rate detection from an electronic weighing scale.

PubMed

González-Landaeta, R; Casas, O; Pallàs-Areny, R

2008-08-01

We propose a novel technique for beat-to-beat heart rate detection based on the ballistocardiographic (BCG) force signal from a subject standing on a common electronic weighing scale. The detection relies on sensing force variations related to the blood acceleration in the aorta, works even if wearing footwear and does not require any sensors attached to the body because it uses the load cells in the scale. We have devised an approach to estimate the sensitivity and frequency response of three commercial weighing scales to assess their capability to detect the BCG force signal. Static sensitivities ranged from 490 nV V(-1) N(-1) to 1670 nV V(-1) N(-1). The frequency response depended on the subject's mass but it was broad enough for heart rate estimation. We have designed an electronic pulse detection system based on off-the-shelf integrated circuits to sense heart-beat-related force variations of about 0.24 N. The signal-to-noise ratio of the main peaks of the force signal detected was higher than 30 dB. A Bland-Altman plot was used to compare the RR time intervals estimated from the ECG and BCG force signals for 17 volunteers. The error was +/-21 ms, which makes the proposed technique suitable for short-term monitoring of the heart rate.

Characteristics of a gelled liquid hyprogen polyphenylene oxide (PPO) foam open-cell insulation system, phase 1

NASA Technical Reports Server (NTRS)

1973-01-01

A large scale gel production and storage facility and a small scale facility, the latter used for detailed visual examination of the gel/PPO foam interface, were developed. A subcontract was given to investigate techniques for the production of gelled liquid hydrogen, develop a process design for scale-up to a 1.89 cu m (500 gallon) gel production and storage facility, determine gel transfer characteristics, determine the solubility rate of gaseous helium in the gel, and investigate the gross gel/PPO foam interfacial phenomena. An inside-tank process for scaled-up production of gelled liquid hydrogen was selected. No detectable gel structure degradation occurred during repeated shearing. The viscosity of gelled liquid hydrogen at shear rates of 300/sec and higher is 2 to 5-fold greater than that of neat liquid hydrogen. No clogging problems were encountered during the transfer of gelled liquid hydrogen through warmed transfer lines. The solubility rate of helium in liquid hydrogen was significantly reduced by the presence of gel structure. The boil-off rates from gelled liquid hydrogen were reduced from 25 to 50 percent compared to those observed for the neat liquid hydrogen under compatible conditions. The polyphenylene oxide (PPO) foam insulation was found to be compatible with liquid ethane.

Hardware accelerator design for tracking in smart camera

NASA Astrophysics Data System (ADS)

Singh, Sanjay; Dunga, Srinivasa Murali; Saini, Ravi; Mandal, A. S.; Shekhar, Chandra; Vohra, Anil

2011-10-01

Smart Cameras are important components in video analysis. For video analysis, smart cameras needs to detect interesting moving objects, track such objects from frame to frame, and perform analysis of object track in real time. Therefore, the use of real-time tracking is prominent in smart cameras. The software implementation of tracking algorithm on a general purpose processor (like PowerPC) could achieve low frame rate far from real-time requirements. This paper presents the SIMD approach based hardware accelerator designed for real-time tracking of objects in a scene. The system is designed and simulated using VHDL and implemented on Xilinx XUP Virtex-IIPro FPGA. Resulted frame rate is 30 frames per second for 250x200 resolution video in gray scale.

Associations between recent gay-related stressful events, emotional distress, social support and unprotected anal intercourse behavior among Chinese men who have sex with men.

PubMed

Yunyong, Liu; Zhe, Wang; Junting, Xu; Yan, Zhou; Xiaoxia, An; Li, Zhao; Yuan, Gu; Chao, Jiang

2016-07-01

This study was designed to assess the levels of and associations between gay-related stressful events, social support, emotional distress and the number of unprotected anal intercourse partners among Chinese men who have sex with men. Using a respondent-driven sampling method, 807 men who have sex with men were recruited in urban areas of northeast China and data were collected via face-to-face interviews. Gay-related stressful events were measured using the Gay-Related Stressful Life Events Scale; levels of depression, anxiety symptoms and social support were measured using the Self-Rating Depression Scale, the Self-Rating Anxiety Scale and the Social Support Rating Scale, respectively. Over a quarter of study participants experienced gay-related stressful events during the preceding 3 months. Their average Self-Rating Depression Scale, Self-Rating Anxiety Scale and Social Support scores differed significantly from the national norm. Gay-related stressful events significantly correlated with anxiety (r = 0.167, p < 0.001), depression (r = 0.165, p < 0.001), social support (r = -0.107, p = 0.002) and number of unprotected anal intercourse partners (r = 0.13, p < 0.001), showing a clear dose-response relationship. Gay-related stressful events are common and are significantly associated with emotional distress, lack of social support and high-risk sexual behaviors among Chinese men who have sex with men. Multifaceted approaches are warranted to increase social support and reduce intolerance toward homosexual behaviors and to reduce risky sexual behaviors related to the rapid HIV epidemic among men who have sex with men population in China. © The Royal Australian and New Zealand College of Psychiatrists 2015.

RNA–protein binding kinetics in an automated microfluidic reactor

PubMed Central

Ridgeway, William K.; Seitaridou, Effrosyni; Phillips, Rob; Williamson, James R.

2009-01-01

Microfluidic chips can automate biochemical assays on the nanoliter scale, which is of considerable utility for RNA–protein binding reactions that would otherwise require large quantities of proteins. Unfortunately, complex reactions involving multiple reactants cannot be prepared in current microfluidic mixer designs, nor is investigation of long-time scale reactions possible. Here, a microfluidic ‘Riboreactor’ has been designed and constructed to facilitate the study of kinetics of RNA–protein complex formation over long time scales. With computer automation, the reactor can prepare binding reactions from any combination of eight reagents, and is optimized to monitor long reaction times. By integrating a two-photon microscope into the microfluidic platform, 5-nl reactions can be observed for longer than 1000 s with single-molecule sensitivity and negligible photobleaching. Using the Riboreactor, RNA–protein binding reactions with a fragment of the bacterial 30S ribosome were prepared in a fully automated fashion and binding rates were consistent with rates obtained from conventional assays. The microfluidic chip successfully combines automation, low sample consumption, ultra-sensitive fluorescence detection and a high degree of reproducibility. The chip should be able to probe complex reaction networks describing the assembly of large multicomponent RNPs such as the ribosome. PMID:19759214

Assessing Performance in Shoulder Arthroscopy: The Imperial Global Arthroscopy Rating Scale (IGARS).

PubMed

Bayona, Sofia; Akhtar, Kash; Gupte, Chinmay; Emery, Roger J H; Dodds, Alexander L; Bello, Fernando

2014-07-02

Surgical training is undergoing major changes with reduced resident work hours and an increasing focus on patient safety and surgical aptitude. The aim of this study was to create a valid, reliable method for an assessment of arthroscopic skills that is independent of time and place and is designed for both real and simulated settings. The validity of the scale was tested using a virtual reality shoulder arthroscopy simulator. The study consisted of two parts. In the first part, an Imperial Global Arthroscopy Rating Scale for assessing technical performance was developed using a Delphi method. Application of this scale required installing a dual-camera system to synchronously record the simulator screen and body movements of trainees to allow an assessment that is independent of time and place. The scale includes aspects such as efficient portal positioning, angles of instrument insertion, proficiency in handling the arthroscope and adequately manipulating the camera, and triangulation skills. In the second part of the study, a validation study was conducted. Two experienced arthroscopic surgeons, blinded to the identities and experience of the participants, each assessed forty-nine subjects performing three different tests using the Imperial Global Arthroscopy Rating Scale. Results were analyzed using two-way analysis of variance with measures of absolute agreement. The intraclass correlation coefficient was calculated for each test to assess inter-rater reliability. The scale demonstrated high internal consistency (Cronbach alpha, 0.918). The intraclass correlation coefficient demonstrated high agreement between the assessors: 0.91 (p < 0.001). Construct validity was evaluated using Kruskal-Wallis one-way analysis of variance (chi-square test, 29.826; p < 0.001), demonstrating that the Imperial Global Arthroscopy Rating Scale distinguishes significantly between subjects with different levels of experience utilizing a virtual reality simulator. The Imperial Global Arthroscopy Rating Scale has a high internal consistency and excellent inter-rater reliability and offers an approach for assessing technical performance in basic arthroscopy on a virtual reality simulator. The Imperial Global Arthroscopy Rating Scale provides detailed information on surgical skills. Although it requires further validation in the operating room, this scale, which is independent of time and place, offers a robust and reliable method for assessing arthroscopic technical skills. Copyright © 2014 by The Journal of Bone and Joint Surgery, Incorporated.

PRION-1 scales analysis supports use of functional outcome measures in prion disease

PubMed Central

Mead, S.; Ranopa, M.; Gopalakrishnan, G.S.; Thompson, A.G.B.; Rudge, P.; Wroe, S.; Kennedy, A.; Hudson, F.; MacKay, A.; Darbyshire, J.H.; Walker, A.S.

2011-01-01

Objectives: Human prion diseases are heterogeneous but invariably fatal neurodegenerative disorders with no known effective therapy. PRION-1, the largest clinical trial in prion disease to date, showed no effect of the potential therapeutic quinacrine on survival. Although there are several limitations to the usefulness of survival as an outcome measure, there have been no comprehensive studies of alternatives. Methods: To address this we did comparative analyses of neurocognitive, psychiatric, global, clinician-rated, and functional scales, focusing on validity, variability, and impact on statistical power over 77 person-years follow-up in 101 symptomatic patients in PRION-1. Results: Quinacrine had no demonstrable benefit on any of the 8 scales (p > 0.4). All scales had substantial numbers of patients with the worst possible score at enrollment (Glasgow Coma Scale score being least affected) and were impacted by missing data due to disease progression. These effects were more significant for cognitive/psychiatric scales than global, clinician-rated, or functional scales. The Barthel and Clinical Dementia Rating scales were the most valid and powerful in simulated clinical trials of an effective therapeutic. A combination of selected subcomponents from these 2 scales gave somewhat increased power, compared to use of survival, to detect clinically relevant effects in future clinical trials of feasible size. Conclusions: Our findings have implications for the choice of primary outcome measure in prion disease clinical trials. Prion disease presents the unusual opportunity to follow patients with a neurodegenerative disease through their entire clinical course, and this provides insights relevant to designing outcome measures in related conditions. PMID:22013183

Scaling and design of landslide and debris-flow experiments

USGS Publications Warehouse

Iverson, Richard M.

2015-01-01

Scaling plays a crucial role in designing experiments aimed at understanding the behavior of landslides, debris flows, and other geomorphic phenomena involving grain-fluid mixtures. Scaling can be addressed by using dimensional analysis or – more rigorously – by normalizing differential equations that describe the evolving dynamics of the system. Both of these approaches show that, relative to full-scale natural events, miniaturized landslides and debris flows exhibit disproportionately large effects of viscous shear resistance and cohesion as well as disproportionately small effects of excess pore-fluid pressure that is generated by debris dilation or contraction. This behavioral divergence grows in proportion to H3, where H is the thickness of a moving mass. Therefore, to maximize geomorphological relevance, experiments with wet landslides and debris flows must be conducted at the largest feasible scales. Another important consideration is that, unlike stream flows, landslides and debris flows accelerate from statically balanced initial states. Thus, no characteristic macroscopic velocity exists to guide experiment scaling and design. On the other hand, macroscopic gravity-driven motion of landslides and debris flows evolves over a characteristic time scale (L/g)1/2, where g is the magnitude of gravitational acceleration and L is the characteristic length of the moving mass. Grain-scale stress generation within the mass occurs on a shorter time scale, H/(gL)1/2, which is inversely proportional to the depth-averaged material shear rate. A separation of these two time scales exists if the criterion H/L < < 1 is satisfied, as is commonly the case. This time scale separation indicates that steady-state experiments can be used to study some details of landslide and debris-flow behavior but cannot be used to study macroscopic landslide or debris-flow dynamics.

Extension-twist coupling of composite circular tubes with application to tilt rotor blade design

NASA Technical Reports Server (NTRS)

Nixon, Mark W.

1987-01-01

This investigation was conducted to determine if twist deformation required for the design of full-scale extension-twist-coupled tilt-rotor blades can be achieved within material design limit loads, and to demonstrate the accuracy of a coupled-beam analysis in predicting twist deformations. Two extension-twist-coupled tilt-rotor blade designs were developed based on theoretically optimum aerodynamic twist distributions. The designs indicated a twist rate requirement of between .216 and .333 deg/in. Agreement between axial tests and analytical predictions was within 10 percent at design limit loads. Agreement between the torsion tests and predictions was within 11 percent.

Development and numerical/experimental characterization of a lab-scale flat flame reactor allowing the analysis of pulverized solid fuel devolatilization and oxidation at high heating rates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lemaire, R., E-mail: romain.lemaire@mines-douai.fr; Menanteau, S.

2016-01-15

This paper deals with the thorough characterization of a new experimental test bench designed to study the devolatilization and oxidation of pulverized fuel particles in a wide range of operating conditions. This lab-scale facility is composed of a fuel feeding system, the functioning of which has been optimized by computational fluid dynamics. It allows delivering a constant and time-independent mass flow rate of fuel particles which are pneumatically transported to the central injector of a hybrid McKenna burner using a carrier gas stream that can be inert or oxidant depending on the targeted application. A premixed propane/air laminar flat flamemore » stabilized on the porous part of the burner is used to generate the hot gases insuring the heating of the central coal/carrier-gas jet with a thermal gradient similar to those found in industrial combustors (>10{sup 5} K/s). In the present work, results issued from numerical simulations performed a priori to characterize the velocity and temperature fields in the reaction chamber have been analyzed and confronted with experimental measurements carried out by coupling particle image velocimetry, thermocouple and two-color pyrometry measurements so as to validate the order of magnitude of the heating rate delivered by such a new test bench. Finally, the main features of the flat flame reactor we developed have been discussed with respect to those of another laboratory-scale system designed to study coal devolatilization at a high heating rate.« less

Development and numerical/experimental characterization of a lab-scale flat flame reactor allowing the analysis of pulverized solid fuel devolatilization and oxidation at high heating rates

NASA Astrophysics Data System (ADS)

Lemaire, R.; Menanteau, S.

2016-01-01

This paper deals with the thorough characterization of a new experimental test bench designed to study the devolatilization and oxidation of pulverized fuel particles in a wide range of operating conditions. This lab-scale facility is composed of a fuel feeding system, the functioning of which has been optimized by computational fluid dynamics. It allows delivering a constant and time-independent mass flow rate of fuel particles which are pneumatically transported to the central injector of a hybrid McKenna burner using a carrier gas stream that can be inert or oxidant depending on the targeted application. A premixed propane/air laminar flat flame stabilized on the porous part of the burner is used to generate the hot gases insuring the heating of the central coal/carrier-gas jet with a thermal gradient similar to those found in industrial combustors (>105 K/s). In the present work, results issued from numerical simulations performed a priori to characterize the velocity and temperature fields in the reaction chamber have been analyzed and confronted with experimental measurements carried out by coupling particle image velocimetry, thermocouple and two-color pyrometry measurements so as to validate the order of magnitude of the heating rate delivered by such a new test bench. Finally, the main features of the flat flame reactor we developed have been discussed with respect to those of another laboratory-scale system designed to study coal devolatilization at a high heating rate.

Parametric analyses of summative scores may lead to conflicting inferences when comparing groups: A simulation study.

PubMed

Khan, Asaduzzaman; Chien, Chi-Wen; Bagraith, Karl S

2015-04-01

To investigate whether using a parametric statistic in comparing groups leads to different conclusions when using summative scores from rating scales compared with using their corresponding Rasch-based measures. A Monte Carlo simulation study was designed to examine between-group differences in the change scores derived from summative scores from rating scales, and those derived from their corresponding Rasch-based measures, using 1-way analysis of variance. The degree of inconsistency between the 2 scoring approaches (i.e. summative and Rasch-based) was examined, using varying sample sizes, scale difficulties and person ability conditions. This simulation study revealed scaling artefacts that could arise from using summative scores rather than Rasch-based measures for determining the changes between groups. The group differences in the change scores were statistically significant for summative scores under all test conditions and sample size scenarios. However, none of the group differences in the change scores were significant when using the corresponding Rasch-based measures. This study raises questions about the validity of the inference on group differences of summative score changes in parametric analyses. Moreover, it provides a rationale for the use of Rasch-based measures, which can allow valid parametric analyses of rating scale data.

Engineered yeast for enhanced CO2 mineralization†

PubMed Central

Barbero, Roberto; Carnelli, Lino; Simon, Anna; Kao, Albert; Monforte, Alessandra d’Arminio; Riccò, Moreno; Bianchi, Daniele; Belcher, Angela

2014-01-01

In this work, a biologically catalyzed CO2 mineralization process for the capture of CO2 from point sources was designed, constructed at a laboratory scale, and, using standard chemical process scale-up protocols, was modeled and evaluated at an industrial scale. A yeast display system in Saccharomyces cerevisae was used to screen several carbonic anhydrase isoforms and mineralization peptides for their impact on CO2 hydration, CaCO3 mineralization, and particle settling rate. Enhanced rates for each of these steps in the CaCO3 mineralization process were confirmed using quantitative techniques in lab-scale measurements. The effect of these enhanced rates on the CO2 capture cost in an industrial scale CO2 mineralization process using coal fly ash as the CaO source was evaluated. The model predicts a process using bCA2- yeast and fly ash is ~10% more cost effective per ton of CO2 captured than a process with no biological molecules, a savings not realized by wild-type yeast and high-temperature stable recombinant CA2 alone or in combination. The levelized cost of electricity for a power plant using this process was calculated and scenarios in which this process compares favorably to CO2 capture by MEA absorption process are presented. PMID:25289021

LanzaTech- Capturing Carbon. Fueling Growth.

ScienceCinema

NONE

2018-01-16

LanzaTech will design a gas fermentation system that will significantly improve the rate at which methane gas is delivered to a biocatalyst. Current gas fermentation processes are not cost effective compared to other gas-to-liquid technologies because they are too slow for large-scale production. If successful, LanzaTech's system will process large amounts of methane at a high rate, reducing the energy inputs and costs associated with methane conversion.

Patient Effort in Traumatic Brain Injury Inpatient Rehabilitation: Course and Associations With Age, Brain Injury Severity, and Time Postinjury

PubMed Central

Seel, Ronald T.; Corrigan, John D.; Dijkers, Marcel P.; Barrett, Ryan S.; Bogner, Jennifer; Smout, Randall J.; Garmoe, William; Horn, Susan D.

2016-01-01

Objective To describe patients' level of effort in occupational, physical, and speech therapy sessions during traumatic brain injury (TBI) inpatient rehabilitation and to evaluate how age, injury severity, cognitive impairment, and time are associated with effort. Design Prospective, multicenter, longitudinal cohort study. Setting Acute TBI rehabilitation programs. Participants Patients (N=1946) receiving 138,555 therapy sessions. Interventions Not applicable. Main Outcome Measures Effort in rehabilitation sessions rated on the Rehabilitation Intensity of Therapy Scale, FIM, Comprehensive Severity Index brain injury severity score, posttraumatic amnesia (PTA), and Agitated Behavior Scale (ABS). Results The Rehabilitation Intensity of Therapy Scale effort ratings in individual therapy sessions closely conformed to a normative distribution for all 3 disciplines. Mean Rehabilitation Intensity of Therapy Scale ratings for patients' therapy sessions were higher in the discharge week than in the admission week (P<.001). For patients who completed 2, 3, or 4 weeks of rehabilitation, differences in effort ratings (P<.001) were observed between 5 subgroups stratified by admission FIM cognitive scores and over time. In linear mixed-effects modeling, age and Comprehensive Severity Index brain injury severity score at admission, days from injury to rehabilitation admission, days from admission, and daily ratings of PTA and ABS score were predictors of level of effort (P<.0001). Conclusions Patients' level of effort can be observed and reliably rated in the TBI inpatient rehabilitation setting using the Rehabilitation Intensity of Therapy Scale. Patients who sustain TBI show varying levels of effort in rehabilitation therapy sessions, with effort tending to increase over the stay. PTA and agitated behavior are primary risk factors that substantially reduce patient effort in therapies. PMID:26212400

An iodine hypersonic wind tunnel for the study of nonequilibrium reacting flows

NASA Technical Reports Server (NTRS)

Pham-Van-diep, G. C.; Muntz, E. P.; Weaver, D. P.; Dewitt, T. G.; Bradley, M. K.; Erwin, D. A.; Kunc, J. A.

1992-01-01

A pilot scale hypersonic wind tunnel operating on pure iodine vapor has been designed and tested. The wind tunnel operates intermittently with a run phase lasting approximately 20 minutes. Successful recirculation of the iodine used during the run phase has been achieved but can be improved. Relevant issues regarding the full scale facility's design and operation, and the use of iodine as a working gas are discussed. Continuous wave laser induced fluorescence was used to monitor number densities within the plume flowfield, while pulsed laser induced fluorescence was used in an initial attempt to measure vibrational energy state population distributions. Preliminary nozzle flow calculations based on finite rate chemistry are presented.

Embitterment in War Veterans with Posttraumatic Stress Disorder

PubMed Central

Sabic, Dzevad; Sabic, Adela; Batic-Mujanovic, Olivera

2018-01-01

Aim The aim of this study was to analyze frequency of embitterment in war veterans with Posttraumatic stress disorder (PTSD). Patients and Methods It was analyzed 174 subjects (from Health Center Zivinice/ Mental Health Center) through a survey conducted in the period from March 2015 to June 2016, of witch 87 war veterans with PTSD and control subjects 87 war veterans without PTSD. The primary outcome measure was the Post-Traumatic Embitterment Disorder Self-Rating Scale (PTED Scale) who contains 19 items designed to assess features of embitterment reactions to negative life events. Secondary efficacy measures included the Clinician-Administered PTSD Scale - V (CAPS), the PTSD CheckList (PCL), the Combat Exposure Scale (CES), the Hamilton Depression Rating Scale (HAM-D), the Hamilton Anxiety Rating Scale (HAM-A) and the World Health Organization Quality of Life Scale (WHOQOL-Bref). All subjects were male. The average age of patients in the group war veterans with PTSD was 52·78 ± 5·99. In the control group average age was 51·42 ± 5·98. Statistical data were analyzed in SPSS statistical program. Results Comparing the results, t tests revealed significant difference between group veterans with PTSD and control group (t=–21·216, p<0·0001). War veterans group with PTSD (X= 51·41 SD= 8·91), war veterans without PTSD (X=14·39, SD=13·61). Conclusion Embitterment is frequent in war veterans with PTSD. PMID:29736102

A Hybrid Fuzzy Model for Lean Product Development Performance Measurement

NASA Astrophysics Data System (ADS)

Osezua Aikhuele, Daniel; Mohd Turan, Faiz

2016-02-01

In the effort for manufacturing companies to meet up with the emerging consumer demands for mass customized products, many are turning to the application of lean in their product development process, and this is gradually moving from being a competitive advantage to a necessity. However, due to lack of clear understanding of the lean performance measurements, many of these companies are unable to implement and fully integrated the lean principle into their product development process. Extensive literature shows that only few studies have focus systematically on the lean product development performance (LPDP) evaluation. In order to fill this gap, the study therefore proposed a novel hybrid model based on Fuzzy Reasoning Approach (FRA), and the extension of Fuzzy-AHP and Fuzzy-TOPSIS methods for the assessment of the LPDP. Unlike the existing methods, the model considers the importance weight of each of the decision makers (Experts) since the performance criteria/attributes are required to be rated, and these experts have different level of expertise. The rating is done using a new fuzzy Likert rating scale (membership-scale) which is designed such that it can address problems resulting from information lost/distortion due to closed-form scaling and the ordinal nature of the existing Likert scale.

School Principals' Decision-Making Behaviour in the Management of Innovation.

ERIC Educational Resources Information Center

McGeown, Vincent

1979-01-01

A rating scale operationalized a model for the adoption and implementation of educational innovation. Phases were designated: creating a climate for change; analyzing antecedent conditions; generating alternatives; initiating change adoption; implementing change; and evaluating change outcomes. Principals' decision-making behavior was the best…

CONTROL OF CRYPTOSPORIDIUM OOCYSTS BY STEADY-STATE CONVENTIONAL TREATMENT

EPA Science Inventory

Pilot-scale experiments have been performed to assess the ability of conventional treatment to control Cryptosporidium oocysts under steady-state conditions. The work was performed with a pilot plant that was designed to minimize flow rates and, as a result, the number of oocyst...

Enhancing Rain Garden Design to Promote Nitrate Removal

EPA Science Inventory

Rain gardens effectively remove some stressors from stormwater, but in most cases they show much smaller removal rates of nitrate, likely due to the media’s high sand and low organic matter content that inhibit trate removal by denitrification. EPA’s pilot-scale research explores...

Effectiveness of Adherence Therapy for People With Schizophrenia in Turkey: A Controlled Study.

PubMed

Dikec, Gul; Kutlu, Yasemin

2016-04-01

This study used a quasi-experimental design with a pretest-posttest control group and follow-up to determine the efficacy of adherence therapy in patients with schizophrenia in Turkey. The sample of this study consisted of patients with schizophrenia (n=30). The Questionnaire Form, Medication Adherence Rating Scale, Internalized Stigma of Mental Illness Scale, and Beck Cognitive Insight Scale were used. The patients were assigned to experimental (n=15) and control (n=15) groups using the randomization method. The experimental group received adherence therapy in eight sessions. When the scores of the patients in the experimental and control groups were compared at the pretest, posttest, and 3- and 6-months follow ups, a significant difference was only found in the Medication Adherence Rating Scale posttest scores. Adherence therapy is effective in improving adherence to treatment but is not effective with regard to insight and internalized stigma in patients with schizophrenia. Copyright © 2015 Elsevier Inc. All rights reserved.

Assessment of children's emotional adjustment: construction and validation of a new instrument.

PubMed

Thorlacius, Ö; Gudmundsson, E

2015-09-01

The present study describes the Children's Emotional Adjustment Scale (CEAS), a 47-item parent-reported scale designed to capture children's emotional functioning on four continuous dimensions. A large community sample of mothers of children (n = 606) aged 6-13 years was used to examine the psychometric properties of the CEAS. Exploratory and confirmatory factor analysis supported the hypothesized four-factor structure of the instrument: (1) temper control; (2) anxiety control; (3) mood repair; and (4) social assertiveness. Cronbach's alphas for the factors were consistently above 0.90, and convergent validity of the factors was satisfactory with maternal ratings of child psychopathology. Children rated by their mothers as having emotional problems in the clinical range on the Strengths and Difficulties Questionnaire had significantly lower scores on the CEAS scales. The CEAS is a psychometrically sound instrument, covering healthy emotional adjustment as well as maladjustment. The scale might prove to be valuable in the assessment and screening of behaviours underlying child psychopathology. © 2014 John Wiley & Sons Ltd.

On being the right size: scaling effects in designing a human-on-a-chip

PubMed Central

Moraes, Christopher; Labuz, Joseph M.; Leung, Brendan M.; Inoue, Mayumi; Chun, Tae-Hwa; Takayama, Shuichi

2013-01-01

Developing a human-on-a-chip by connecting multiple model organ systems would provide an intermediate screen for therapeutic efficacy and toxic side effects of drugs prior to conducting expensive clinical trials. However, correctly designing individual organs and scaling them relative to each other to make a functional microscale human analog is challenging, and a generalized approach has yet to be identified. In this work, we demonstrate the importance of rational design of both the individual organ and its relationship with other organs, using a simple two-compartment system simulating insulin-dependent glucose uptake in adipose tissues. We demonstrate that inter-organ scaling laws depend on both the number of cells, and on the spatial arrangement of those cells within the microfabricated construct. We then propose a simple and novel inter-organ ‘metabolically-supported functional scaling’ approach predicated on maintaining in vivo cellular basal metabolic rates, by limiting resources available to cells on the chip. This approach leverages findings from allometric scaling models in mammals that limited resources in vivo prompts cells to behave differently than in resource-rich in vitro cultures. Although applying scaling laws directly to tissues can result in systems that would be quite challenging to implement, engineering workarounds may be used to circumvent these scaling issues. Specific workarounds discussed include the limited oxygen carrying capacity of cell culture media when used as a blood substitute and the ability to engineer non-physiological structures to augment organ function, to create the transport-accessible, yet resource-limited environment necessary for cells to mimic in vivo functionality. Furthermore, designing the structure of individual tissues in each organ compartment may be a useful strategy to bypass scaling concerns at the inter-organ level. PMID:23925524

Theoretical Heterogeneous Catalysis: Scaling Relationships and Computational Catalyst Design.

PubMed

Greeley, Jeffrey

2016-06-07

Scaling relationships are theoretical constructs that relate the binding energies of a wide variety of catalytic intermediates across a range of catalyst surfaces. Such relationships are ultimately derived from bond order conservation principles that were first introduced several decades ago. Through the growing power of computational surface science and catalysis, these concepts and their applications have recently begun to have a major impact in studies of catalytic reactivity and heterogeneous catalyst design. In this review, the detailed theory behind scaling relationships is discussed, and the existence of these relationships for catalytic materials ranging from pure metal to oxide surfaces, for numerous classes of molecules, and for a variety of catalytic surface structures is described. The use of the relationships to understand and elucidate reactivity trends across wide classes of catalytic surfaces and, in some cases, to predict optimal catalysts for certain chemical reactions, is explored. Finally, the observation that, in spite of the tremendous power of scaling relationships, their very existence places limits on the maximum rates that may be obtained for the catalyst classes in question is discussed, and promising strategies are explored to overcome these limitations to usher in a new era of theory-driven catalyst design.

Performance Analysis, Design Considerations, and Applications of Extreme-Scale In Situ Infrastructures

DOE PAGES

Ayachit, Utkarsh; Bauer, Andrew; Duque, Earl P. N.; ...

2016-11-01

A key trend facing extreme-scale computational science is the widening gap between computational and I/O rates, and the challenge that follows is how to best gain insight from simulation data when it is increasingly impractical to save it to persistent storage for subsequent visual exploration and analysis. One approach to this challenge is centered around the idea of in situ processing, where visualization and analysis processing is performed while data is still resident in memory. Our paper examines several key design and performance issues related to the idea of in situ processing at extreme scale on modern platforms: Scalability, overhead,more » performance measurement and analysis, comparison and contrast with a traditional post hoc approach, and interfacing with simulation codes. We illustrate these principles in practice with studies, conducted on large-scale HPC platforms, that include a miniapplication and multiple science application codes, one of which demonstrates in situ methods in use at greater than 1M-way concurrency.« less

Aeronomy report no. 74: The Urbana meteor-radar system; design, development, and first observations

NASA Technical Reports Server (NTRS)

Hess, G. C.; Geller, M. A.

1976-01-01

The design, development, and first observations of a high power meteor-radar system located near Urbana, Illinois are described. The roughly five-fold increase in usable echo rate compared to other facilities, along with automated digital data processing and interferometry measurement of echo arrival angles, permits unsurpassed observations of tidal structure and shorter period waves. Such observations are discussed. The technique of using echo decay rates to infer density and scale height and the method of inferring wind shear from radial acceleration are examined. An original experiment to test a theory of the Delta-region winter anomaly is presented.

AirSTAR: A UAV Platform for Flight Dynamics and Control System Testing

NASA Technical Reports Server (NTRS)

Jordan, Thomas L.; Foster, John V.; Bailey, Roger M.; Belcastro, Christine M.

2006-01-01

As part of the NASA Aviation Safety Program at Langley Research Center, a dynamically scaled unmanned aerial vehicle (UAV) and associated ground based control system are being developed to investigate dynamics modeling and control of large transport vehicles in upset conditions. The UAV is a 5.5% (seven foot wingspan), twin turbine, generic transport aircraft with a sophisticated instrumentation and telemetry package. A ground based, real-time control system is located inside an operations vehicle for the research pilot and associated support personnel. The telemetry system supports over 70 channels of data plus video for the downlink and 30 channels for the control uplink. Data rates are in excess of 200 Hz. Dynamic scaling of the UAV, which includes dimensional, weight, inertial, actuation, and control system scaling, is required so that the sub-scale vehicle will realistically simulate the flight characteristics of the full-scale aircraft. This testbed will be utilized to validate modeling methods, flight dynamics characteristics, and control system designs for large transport aircraft, with the end goal being the development of technologies to reduce the fatal accident rate due to loss-of-control.

Large-scale modeling of rain fields from a rain cell deterministic model

NASA Astrophysics Data System (ADS)

FéRal, Laurent; Sauvageot, Henri; Castanet, Laurent; Lemorton, JoëL.; Cornet, FréDéRic; Leconte, Katia

2006-04-01

A methodology to simulate two-dimensional rain rate fields at large scale (1000 × 1000 km2, the scale of a satellite telecommunication beam or a terrestrial fixed broadband wireless access network) is proposed. It relies on a rain rate field cellular decomposition. At small scale (˜20 × 20 km2), the rain field is split up into its macroscopic components, the rain cells, described by the Hybrid Cell (HYCELL) cellular model. At midscale (˜150 × 150 km2), the rain field results from the conglomeration of rain cells modeled by HYCELL. To account for the rain cell spatial distribution at midscale, the latter is modeled by a doubly aggregative isotropic random walk, the optimal parameterization of which is derived from radar observations at midscale. The extension of the simulation area from the midscale to the large scale (1000 × 1000 km2) requires the modeling of the weather frontal area. The latter is first modeled by a Gaussian field with anisotropic covariance function. The Gaussian field is then turned into a binary field, giving the large-scale locations over which it is raining. This transformation requires the definition of the rain occupation rate over large-scale areas. Its probability distribution is determined from observations by the French operational radar network ARAMIS. The coupling with the rain field modeling at midscale is immediate whenever the large-scale field is split up into midscale subareas. The rain field thus generated accounts for the local CDF at each point, defining a structure spatially correlated at small scale, midscale, and large scale. It is then suggested that this approach be used by system designers to evaluate diversity gain, terrestrial path attenuation, or slant path attenuation for different azimuth and elevation angle directions.

Developing a Comprehensive and Comparative Questionnaire for Measuring Personality in Chimpanzees Using a Simultaneous Top-Down/Bottom-Up Design

PubMed Central

Freeman, Hani D.; Brosnan, Sarah F.; Hopper, Lydia M.; Lambeth, Susan P.; Schapiro, Steven J.; Gosling, Samuel D.

2013-01-01

One effective method for measuring personality in primates is to use personality trait ratings to distill the experience of people familiar with the individual animals. Previous rating instruments were created using either top-down or bottom-up approaches. Top-down approaches, which essentially adapt instruments originally designed for use with another species, can unfortunately lead to the inclusion of traits irrelevant to chimpanzees or fail to include all relevant aspects of chimpanzee personality. Conversely, because bottom-up approaches derive traits specifically for chimpanzees, their unique items may impede comparisons with findings in other studies and other species. To address the limitations of each approach, we developed a new personality rating scale using a combined top-down/bottom-up design. Seventeen raters rated 99 chimpanzees on the new 41-item scale, with all but one item being rated reliably. Principal components analysis, using both varimax and direct oblimin rotations, identified six broad factors. Strong evidence was found for five of the factors (Reactivity/Undependability, Dominance, Openness, Extraversion, and Agreeableness). A sixth factor (Methodical) was offered provisionally until more data are collected. We validated the factors against behavioral data collected independently on the chimpanzees. The five factors demonstrated good evidence for convergent and predictive validity, thereby underscoring the robustness of the factors. Our combined top-down/ bottom-up approach provides the most extensive data to date to support the universal existence of these five personality factors in chimpanzees. This framework, which facilitates cross-species comparisons, can also play a vital role in understanding the evolution of personality and can assist with husbandry and welfare efforts. PMID:23733359

Melter Throughput Enhancements for High-Iron HLW

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kruger, A. A.; Gan, Hoa; Joseph, Innocent

2012-12-26

This report describes work performed to develop and test new glass and feed formulations in order to increase glass melting rates in high waste loading glass formulations for HLW with high concentrations of iron. Testing was designed to identify glass and melter feed formulations that optimize waste loading and waste processing rate while meeting all processing and product quality requirements. The work included preparation and characterization of crucible melts to assess melt rate using a vertical gradient furnace system and to develop new formulations with enhanced melt rate. Testing evaluated the effects of waste loading on glass properties and themore » maximum waste loading that can be achieved. The results from crucible-scale testing supported subsequent DuraMelter 100 (DM100) tests designed to examine the effects of enhanced glass and feed formulations on waste processing rate and product quality. The DM100 was selected as the platform for these tests due to its extensive previous use in processing rate determination for various HLW streams and glass compositions.« less

Expanding Metabolic Engineering Algorithms Using Feasible Space and Shadow Price Constraint Modules

PubMed Central

Tervo, Christopher J.; Reed, Jennifer L.

2014-01-01

While numerous computational methods have been developed that use genome-scale models to propose mutants for the purpose of metabolic engineering, they generally compare mutants based on a single criteria (e.g., production rate at a mutant’s maximum growth rate). As such, these approaches remain limited in their ability to include multiple complex engineering constraints. To address this shortcoming, we have developed feasible space and shadow price constraint (FaceCon and ShadowCon) modules that can be added to existing mixed integer linear adaptive evolution metabolic engineering algorithms, such as OptKnock and OptORF. These modules allow strain designs to be identified amongst a set of multiple metabolic engineering algorithm solutions that are capable of high chemical production while also satisfying additional design criteria. We describe the various module implementations and their potential applications to the field of metabolic engineering. We then incorporated these modules into the OptORF metabolic engineering algorithm. Using an Escherichia coli genome-scale model (iJO1366), we generated different strain designs for the anaerobic production of ethanol from glucose, thus demonstrating the tractability and potential utility of these modules in metabolic engineering algorithms. PMID:25478320

Flight Control System Analysis and Design for a Remotely Piloted Vehicle with Thrust Vectoring Unit.

DTIC Science & Technology

1980-12-01

about the X-axis (slug-ft 2) Ixz Product of inertia (slug-ft 2 ) ly Moi,;ent of inertia about Y-axis (slug-ft 2) Iz Moment of inertia about Z-axis (slug...domain n Load factor (g’s) P Roll rate (rad/sec) xi p Perturbation roll rate (rad/sec) Q Pitch rate (rad/sec) q Perturbation pitch rate (rad/sec...was decided to employ a scale factor of 1.75 in increasing the vertical tail area. This choice was somewhat aruitrary since no documentation could be

Cold Flow Testing for Liquid Propellant Rocket Injector Scaling and Throttling

NASA Technical Reports Server (NTRS)

Kenny, Jeremy R.; Moser, Marlow D.; Hulka, James; Jones, Gregg

2006-01-01

Scaling and throttling of combustion devices are important capabilities to demonstrate in development of liquid rocket engines for NASA's Space Exploration Mission. Scaling provides the ability to design new injectors and injection elements with predictable performance on the basis of test experience with existing injectors and elements, and could be a key aspect of future development programs. Throttling is the reduction of thrust with fixed designs and is a critical requirement in lunar and other planetary landing missions. A task in the Constellation University Institutes Program (CUIP) has been designed to evaluate spray characteristics when liquid propellant rocket engine injectors are scaled and throttled. The specific objectives of the present study are to characterize injection and primary atomization using cold flow simulations of the reacting sprays. These simulations can provide relevant information because the injection and primary atomization are believed to be the spray processes least affected by the propellant reaction. Cold flow studies also provide acceptable test conditions for a university environment. Three geometric scales - 1/4- scale, 1/2-scale, and full-scale - of two different injector element types - swirl coaxial and shear coaxial - will be designed, fabricated, and tested. A literature review is currently being conducted to revisit and compile the previous scaling documentation. Because it is simple to perform, throttling will also be examined in the present work by measuring primary atomization characteristics as the mass flow rate and pressure drop of the six injector element concepts are reduced, with corresponding changes in chamber backpressure. Simulants will include water and gaseous nitrogen, and an optically accessible chamber will be used for visual and laser-based diagnostics. The chamber will include curtain flow capability to repress recirculation, and additional gas injection to provide independent control of the backpressure. This paper provides a short review of the appropriate literature, as well as descriptions of plans for experimental hardware, test chamber instrumentation, diagnostics, and testing.

Does a web-based feedback training program result in improved reliability in clinicians' ratings of the Global Assessment of Functioning (GAF) Scale?

PubMed

Støre-Valen, Jakob; Ryum, Truls; Pedersen, Geir A F; Pripp, Are H; Jose, Paul E; Karterud, Sigmund

2015-09-01

The Global Assessment of Functioning (GAF) Scale is used in routine clinical practice and research to estimate symptom and functional severity and longitudinal change. Concerns about poor interrater reliability have been raised, and the present study evaluated the effect of a Web-based GAF training program designed to improve interrater reliability in routine clinical practice. Clinicians rated up to 20 vignettes online, and received deviation scores as immediate feedback (i.e., own scores compared with expert raters) after each rating. Growth curves of absolute SD scores across the vignettes were modeled. A linear mixed effects model, using the clinician's deviation scores from expert raters as the dependent variable, indicated an improvement in reliability during training. Moderation by content of scale (symptoms; functioning), scale range (average; extreme), previous experience with GAF rating, profession, and postgraduate training were assessed. Training reduced deviation scores for inexperienced GAF raters, for individuals in clinical professions other than nursing and medicine, and for individuals with no postgraduate specialization. In addition, training was most beneficial for cases with average severity of symptoms compared with cases with extreme severity. The results support the use of Web-based training with feedback routines as a means to improve the reliability of GAF ratings performed by clinicians in mental health practice. These results especially pertain to clinicians in mental health practice who do not have a masters or doctoral degree. (c) 2015 APA, all rights reserved.

Reduction of dioxin emission by a multi-layer reactor with bead-shaped activated carbon in simulated gas stream and real flue gas of a sinter plant.

PubMed

Hung, Pao Chen; Lo, Wei Chiao; Chi, Kai Hsien; Chang, Shu Hao; Chang, Moo Been

2011-01-01

A laboratory-scale multi-layer system was developed for the adsorption of PCDD/Fs from gas streams at various operating conditions, including gas flow rate, operating temperature and water vapor content. Excellent PCDD/F removal efficiency (>99.99%) was achieved with the multi-layer design with bead-shaped activated carbons (BACs). The PCDD/F removal efficiency achieved with the first layer adsorption bed decreased as the gas flow rate was increased due to the decrease of the gas retention time. The PCDD/F concentrations measured at the outlet of the third layer adsorption bed were all lower than 0.1 ng I-TEQ Nm⁻³. The PCDD/Fs desorbed from BAC were mainly lowly chlorinated congeners and the PCDD/F outlet concentrations increased as the operating temperature was increased. In addition, the results of pilot-scale experiment (real flue gases of an iron ore sintering plant) indicated that as the gas flow rate was controlled at 15 slpm, the removal efficiencies of PCDD/F congeners achieved with the multi-layer reactor with BAC were better than that in higher gas flow rate condition (20 slpm). Overall, the lab-scale and pilot-scale experiments indicated that PCDD/F removal achieved by multi-layer reactor with BAC strongly depended on the flow rate of the gas stream to be treated. Copyright © 2010 Elsevier Ltd. All rights reserved.

Design and engineering of water-soluble light-harvesting protein maquettes

DOE PAGES

Kodali, Goutham; Mancini, Joshua A.; Solomon, Lee A.; ...

2017-01-01

Natural selection in photosynthesis has engineered tetrapyrrole based, nanometer scale, light harvesting and energy capture in light-induced charge separation. By designing and creating nanometer scale artificial light harvesting and charge separating proteins, we have the opportunity to reengineer and overcome the limitations of natural selection to extend energy capture to new wavelengths and to tailor efficient systems that better meet human as opposed to cellular energetic needs. While tetrapyrrole cofactor incorporation in natural proteins is complex and often assisted by accessory proteins for cofactor transport and insertion, artificial protein functionalization relies on a practical understanding of the basic physical chemistrymore » of protein and cofactors that drive nanometer scale self-assembly. Patterning and balancing of hydrophobic and hydrophilic tetrapyrrole substituents is critical to avoid natural or synthetic porphyrin and chlorin aggregation in aqueous media and speed cofactor partitioning into the non-polar core of a man-made water soluble protein designed according to elementary first principles of protein folding. In conclusion, this partitioning is followed by site-specific anchoring of tetrapyrroles to histidine ligands strategically placed for design control of rates and efficiencies of light energy and electron transfer while orienting at least one polar group towards the aqueous phase.« less

Design and engineering of water-soluble light-harvesting protein maquettes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kodali, Goutham; Mancini, Joshua A.; Solomon, Lee A.

Natural selection in photosynthesis has engineered tetrapyrrole based, nanometer scale, light harvesting and energy capture in light-induced charge separation. By designing and creating nanometer scale artificial light harvesting and charge separating proteins, we have the opportunity to reengineer and overcome the limitations of natural selection to extend energy capture to new wavelengths and to tailor efficient systems that better meet human as opposed to cellular energetic needs. While tetrapyrrole cofactor incorporation in natural proteins is complex and often assisted by accessory proteins for cofactor transport and insertion, artificial protein functionalization relies on a practical understanding of the basic physical chemistrymore » of protein and cofactors that drive nanometer scale self-assembly. Patterning and balancing of hydrophobic and hydrophilic tetrapyrrole substituents is critical to avoid natural or synthetic porphyrin and chlorin aggregation in aqueous media and speed cofactor partitioning into the non-polar core of a man-made water soluble protein designed according to elementary first principles of protein folding. In conclusion, this partitioning is followed by site-specific anchoring of tetrapyrroles to histidine ligands strategically placed for design control of rates and efficiencies of light energy and electron transfer while orienting at least one polar group towards the aqueous phase.« less

Behavioral Indices in Medical Care Outcome: The Working Alliance, Adherence, and Related Factors

PubMed Central

Boylan, Laura S.; Fontanella, Jessie A.

2008-01-01

Background The working alliance has been shown to be a consistent predictor of patient outcome and satisfaction in psychotherapy. This study examines the role of the working alliance and related behavioral indices in predicting medical outcome. Objective Cognitive and emotional dimensions of the physician–patient relationship were examined in relation to patients’ ratings of physician empathy, physician multicultural competence, perceived utility of treatment, and patients’ adherence self-efficacy. These factors were then examined as part of a theoretical framework using path analyses to explain patient self-reported adherence to and satisfaction with treatment. Design The study was based on an ex-post facto field correlation design. Participants One hundred fifty-two adult outpatients from a neurology clinic at Bellevue Hospital, a large municipal hospital in New York City, participated in the study. Interventions Surveys given to participants. Measurements We used the following measurements: Physician–Patient Working Alliance Scale, Perceived Utility Scale, Treatment Adherence Self-Efficacy Scale, Medical Outcome Study Adherence Scale, Physician Empathy Questionnaire, Physician Multicultural Competence Questionnaire, Medical Patient Satisfaction Questionnaire. Main Results The effect sizes for adherence are between 0.07 and 0.21 and for satisfaction between 0.10 to >0.50. Regression and path analyses showed that ratings of physician multicultural competence and patient adherence self-efficacy beliefs predicted patient adherence (SB = 0.34) and (SB = 0.30) and satisfaction (SB = 0.18) and (SB = 0.12), respectively. Working alliance ratings also predicted patient satisfaction (SB = 0.49). Conclusions Psychological and interpersonal dimensions of medical care are related to patient adherence and satisfaction. Medical care providers may be able to use these dimensions to target and improve health care outcomes. PMID:18972089

Testing of the Multi-Fluid Evaporator Engineering Development Unit

NASA Technical Reports Server (NTRS)

Quinn, Gregory; O'Connor, Ed; Riga, Ken; Anderson, Molly; Westheimer, David

2007-01-01

Hamilton Sundstrand is under contract with the NASA Johnson Space Center to develop a scalable, evaporative heat rejection system called the Multi-Fluid Evaporator (MFE). It is being designed to support the Orion Crew Module and to support future Constellation missions. The MFE would be used from Earth sea level conditions to the vacuum of space. The current Shuttle configuration utilizes an ammonia boiler and flash evaporator system to achieve cooling at all altitudes. The MFE system combines both functions into a single compact package with significant weight reduction and improved freeze-up protection. The heat exchanger core is designed so that radial flow of the evaporant provides increasing surface area to keep the back pressure low. The multiple layer construction of the core allows for efficient scale up to the desired heat rejection rate. The full scale MFE prototype will be constructed with four core sections that, combined with a novel control scheme, manage the risk of freezing the heat exchanger cores. A sub-scale MFE engineering development unit (EDU) has been built, and is identical to one of the four sections of a full scale prototype. The EDU has completed testing at Hamilton Sundstrand. The overall test objective was to determine the thermal performance of the EDU. The first set of tests simulated how each of the four sections of the prototype would perform by varying the chamber pressure, evaporant flow rate, coolant flow rate and coolant temperature. A second set of tests was conducted with an outlet steam header in place to verify that the outlet steam orifices prevent freeze-up in the core while also allowing the desired thermal turn-down ratio. This paper discusses the EDU tests and results.

Ecological Momentary Assessment Methodology in Chronic Pain Research: A Systematic Review.

PubMed

May, Marcella; Junghaenel, Doerte U; Ono, Masakatsu; Stone, Arthur A; Schneider, Stefan

2018-01-31

Self-reported pain intensity assessments are central to chronic pain research. Ecological momentary assessment (EMA) methodologies are uniquely positioned to collect these data, and are indeed being used in the field. However, EMA protocols are complex, and many decisions are necessary in the design of EMA research studies. A systematic literature review identified 105 articles drawing from 62 quantitative EMA research projects examining pain intensity in adult chronic pain patients. Study characteristics were tabulated to summarize and describe the use of EMA, with an emphasis placed on various dimensions of decision-making involved in executing EMA methodologies. Most identified studies considered within-person relationships between pain and other variables, and a few examined interventions on chronic pain. There was a trend toward the use of smartphones as EMA data collection devices more recently, and completion rates were not reported in nearly one third of studies. Pain intensity items varied widely with respect to number of scale points, anchor labels, and length of reporting period; most used numeric rating scales. Recommendations are provided for reporting to improve reproducibility, comparability, and interpretation of results, and for opportunities to clarify the importance of design decisions. Studies that use EMA methodologies to assess pain intensity are heterogeneous. Aspects of protocol design, including data input modality and pain item construction, have the potential to influence the data collected. Thorough reporting on design features and completion rates therefore facilitates reproducibility, comparability, and interpretation of study results. Copyright © 2018 The American Pain Society. Published by Elsevier Inc. All rights reserved.

Next-generation negative symptom assessment for clinical trials: validation of the Brief Negative Symptom Scale.

PubMed

Strauss, Gregory P; Keller, William R; Buchanan, Robert W; Gold, James M; Fischer, Bernard A; McMahon, Robert P; Catalano, Lauren T; Culbreth, Adam J; Carpenter, William T; Kirkpatrick, Brian

2012-12-01

The current study examined the psychometric properties of the Brief Negative Symptom Scale (BNSS), a next-generation rating instrument developed in response to the NIMH sponsored consensus development conference on negative symptoms. Participants included 100 individuals with a DSM-IV diagnosis of schizophrenia or schizoaffective disorder who completed a clinical interview designed to assess negative, positive, disorganized, and general psychiatric symptoms, as well as functional outcome. A battery of anhedonia questionnaires and neuropsychological tests were also administered. Results indicated that the BNSS has excellent internal consistency and temporal stability, as well as good convergent and discriminant validity in its relationships with other symptom rating scales, functional outcome, self-reported anhedonia, and neuropsychological test scores. Given its brevity (13-items, 15-minute interview) and good psychometric characteristics, the BNSS can be considered a promising new instrument for use in clinical trials. Copyright © 2012 Elsevier B.V. All rights reserved.

Ketamine rapidly relieves acute suicidal ideation in cancer patients: a randomized controlled clinical trial.

PubMed

Fan, Wei; Yang, HaiKou; Sun, Yong; Zhang, Jun; Li, Guangming; Zheng, Ying; Liu, Yi

2017-01-10

This study was designed to examine the rapid antidepressant effects of single dose ketamine on suicidal ideation and overall depression level in patients with newly-diagnosed cancer. Forty-two patients were enrolled into the controlled trial and randomized into two groups: ketamine group and midazolam group. Patients from the two groups received a sub-anesthetic dose of racemic ketamine hydrochloride or midazolam. Suicidal ideation score, measured with the Beck Scale and suicidal part of the Montgomery-Asberg Depression Rating Scale, significantly decreased on day 1 and day 3 in ketamine-treated patients when compared to those treated with midazolam. Consistently, overall depression levels measured using the Montgomery-Asberg Depression Rating Scale indicated a significant relief of overall depression on day 1 in ketamine-treated patients. Collectively, this study provides novel information about the rapid antidepressant effect of ketamine on acute depression and suicidal ideation in newly-diagnosed cancer patients.

Advanced AFCS developments on the XV-15 tilt rotor research aircraft. [Automatic Flight Control System

NASA Technical Reports Server (NTRS)

Churchill, G. B.; Gerdes, R. M.

1984-01-01

The design criteria and control and handling qualities of the Automatic Flight Control System (AFCS), developed in the framework of the XV-15 tilt-rotor research aircraft, are evaluated, differentiating between the stability and control criteria. A technically aggressive SCAS control law was implemented, demonstrating that significant benefits accrue when stability criteria are separated from design criteria; the design analyses for application of the control law are presented, and the limit bandwidth for stabilization in hovering flight is shown to be defined by rotor or control lag functions. Flight tests of the aircraft resulted in a rating of 3 on the Cooper-Harper scale; a possibility of achieving a rating of 2 is expected if the system is applied to the yaw and heave control modes.

Antidepressant Efficacy of the Antimuscarinic Drug Scopolamine

PubMed Central

Furey, Maura L.; Drevets, Wayne C.

2010-01-01

Context The need for improved therapeutic agents that more quickly and effectively treat depression is critical. In a pilot study we evaluated the role of the cholinergic system in cognitive symptoms of depression and unexpectedly observed rapid reductions in depression severity following the administration of the antimuscarinic drug scopolamine hydrobromide (4 μg/kg intravenously) compared with placebo (P=.002). Subsequently a clinical trial was designed to assess more specifically the antidepressant efficacy of scopolamine. Objective To evaluate scopolamine as a potential antidepressant agent. Design Two studies were conducted: a double-blind, placebo-controlled, dose-finding study followed by a double-blind, placebo-controlled, crossover clinical trial. Setting The National Institute of Mental Health. Patients Currently depressed outpatients aged 18 to 50 years meeting DSM-IV criteria for recurrent major depressive disorder or bipolar disorder. Of 39 eligible patients, 19 were randomized and 18 completed the trial. Interventions Multiple sessions including intravenous infusions of placebo or scopolamine hydrobromide (4 μg/kg). Individuals were randomized to a placebo/ scopolamine or scopolamine/placebo sequence (series of 3 placebo sessions and series of 3 scopolamine sessions). Sessions occurred 3 to 5 days apart. Main Outcome Measures Psychiatric evaluations using the Montgomery-Asberg Depression Rating Scale and the Hamilton Anxiety Rating Scale were performed to assess antidepressant and antianxiety responses to scopolamine. Results The placebo/scopolamine group showed no significant change during placebo infusion vs baseline; reductions in depression and anxiety rating scale scores (P<.001 for both) were observed after the administration of scopolamine compared with placebo. The scopolamine/placebo group also showed reductions in depression and anxiety rating scale scores (P<.001 for both) after the administration of scopolamine, relative to baseline, and these effects persisted as they received placebo. In both groups, improvement was significant at the first evaluation after scopolamine administration (P≤.002). Conclusion Rapid, robust antidepressant responses to the antimuscarinic scopolamine occurred in currently depressed patients who predominantly had poor prognoses. PMID:17015814

Estimates of reservoir methane emissions based on a spatially ...

EPA Pesticide Factsheets

Global estimates of methane (CH4) emissions from reservoirs are poorly constrained, partly due to the challenges of accounting for intra-reservoir spatial variability. Reservoir-scale emission rates are often estimated by extrapolating from measurement made at a few locations; however, error and bias associated with this approach can be large and difficult to quantify. Here we use a generalized random tessellation survey (GRTS) design to generate estimates of central tendency and variance at multiple spatial scales in a reservoir. GRTS survey designs are probabilistic and spatially balanced which eliminates bias associated with expert judgment in site selection. GRTS surveys also allow for variance estimates that account for spatial pattern in emission rates. Total CH4 emission rates (i.e. sum of ebullition and diffusive emissions) were 4.8 (±2.1), 33.0 (±10.7), and 8.3 (±2.2) mg CH4 m-2 h-1 in open-waters, tributary associated areas, and the entire reservoir for the period in August 2014 during which 115 sites were sampled across an 7.98 km2 reservoir in Southwestern, Ohio, USA. Tributary areas occupy 12% of the reservoir surface, but were the source of 41% of total CH4 emissions, highlighting the importance of riverine-lacustrine transition zones. Ebullition accounted for >90% of CH4 emission at all spatial scales. Confidence interval estimates that incorporated spatial pattern in CH4 emissions were up to 29% narrower than when spatial independence

Complexity and Pilot Workload Metrics for the Evaluation of Adaptive Flight Controls on a Full Scale Piloted Aircraft

NASA Technical Reports Server (NTRS)

Hanson, Curt; Schaefer, Jacob; Burken, John J.; Larson, David; Johnson, Marcus

2014-01-01

Flight research has shown the effectiveness of adaptive flight controls for improving aircraft safety and performance in the presence of uncertainties. The National Aeronautics and Space Administration's (NASA)'s Integrated Resilient Aircraft Control (IRAC) project designed and conducted a series of flight experiments to study the impact of variations in adaptive controller design complexity on performance and handling qualities. A novel complexity metric was devised to compare the degrees of simplicity achieved in three variations of a model reference adaptive controller (MRAC) for NASA's F-18 (McDonnell Douglas, now The Boeing Company, Chicago, Illinois) Full-Scale Advanced Systems Testbed (Gen-2A) aircraft. The complexity measures of these controllers are also compared to that of an earlier MRAC design for NASA's Intelligent Flight Control System (IFCS) project and flown on a highly modified F-15 aircraft (McDonnell Douglas, now The Boeing Company, Chicago, Illinois). Pilot comments during the IRAC research flights pointed to the importance of workload on handling qualities ratings for failure and damage scenarios. Modifications to existing pilot aggressiveness and duty cycle metrics are presented and applied to the IRAC controllers. Finally, while adaptive controllers may alleviate the effects of failures or damage on an aircraft's handling qualities, they also have the potential to introduce annoying changes to the flight dynamics or to the operation of aircraft systems. A nuisance rating scale is presented for the categorization of nuisance side-effects of adaptive controllers.

Fabrication of 3D surface structures using grayscale lithography

NASA Astrophysics Data System (ADS)

Stilson, Christopher; Pal, Rajan; Coutu, Ronald A.

2014-03-01

The ability to design and develop 3D microstructures is important for microelectromechanical systems (MEMS) fabrication. Previous techniques used to create 3D devices included tedious steps in direct writing and aligning patterns onto a substrate followed by multiple photolithography steps using expensive, customized equipment. Additionally, these techniques restricted batch processing and placed limits on achievable shapes. Gray-scale lithography enables the fabrication of a variety of shapes using a single photolithography step followed by reactive ion etching (RIE). Micromachining 3D silicon structures for MEMS can be accomplished using gray-scale lithography along with dry anisotropic etching. In this study, we investigated: using MATLAB for mask designs; feasibility of using 1 μm Heidelberg mask maker to direct write patterns onto photoresist; using RIE processing to etch patterns into a silicon substrate; and the ability to tailor etch selectivity for precise fabrication. To determine etch rates and to obtain desired etch selectivity, parameters such as gas mixture, gas flow, and electrode power were studied. This process successfully demonstrates the ability to use gray-scale lithography and RIE for use in the study of micro-contacts. These results were used to produce a known engineered non-planer surface for testing micro-contacts. Surface structures are between 5 μm and 20 μm wide with varying depths and slopes based on mask design and etch rate selectivity. The engineered surfaces will provide more insight into contact geometries and failure modes of fixed-fixed micro-contacts.

A small-scale, rolled-membrane microfluidic artificial lung designed towards future large area manufacturing.

PubMed

Thompson, A J; Marks, L H; Goudie, M J; Rojas-Pena, A; Handa, H; Potkay, J A

2017-03-01

Artificial lungs have been used in the clinic for multiple decades to supplement patient pulmonary function. Recently, small-scale microfluidic artificial lungs (μAL) have been demonstrated with large surface area to blood volume ratios, biomimetic blood flow paths, and pressure drops compatible with pumpless operation. Initial small-scale microfluidic devices with blood flow rates in the μ l/min to ml/min range have exhibited excellent gas transfer efficiencies; however, current manufacturing techniques may not be suitable for scaling up to human applications. Here, we present a new manufacturing technology for a microfluidic artificial lung in which the structure is assembled via a continuous "rolling" and bonding procedure from a single, patterned layer of polydimethyl siloxane (PDMS). This method is demonstrated in a small-scale four-layer device, but is expected to easily scale to larger area devices. The presented devices have a biomimetic branching blood flow network, 10  μ m tall artificial capillaries, and a 66  μ m thick gas transfer membrane. Gas transfer efficiency in blood was evaluated over a range of blood flow rates (0.1-1.25 ml/min) for two different sweep gases (pure O 2 , atmospheric air). The achieved gas transfer data closely follow predicted theoretical values for oxygenation and CO 2 removal, while pressure drop is marginally higher than predicted. This work is the first step in developing a scalable method for creating large area microfluidic artificial lungs. Although designed for microfluidic artificial lungs, the presented technique is expected to result in the first manufacturing method capable of simply and easily creating large area microfluidic devices from PDMS.

Rainfall From Resolved Rather Than Parameterized Processes Better Represents the Present‐Day and Climate Change Response of Moderate Rates in the Community Atmosphere Model

PubMed Central

Pritchard, Michael S.; O'Brien, Travis A.; Timmermans, Ben W.

2018-01-01

Abstract Deficiencies in the parameterizations of convection used in global climate models often lead to a distorted representation of the simulated rainfall intensity distribution (i.e., too much rainfall from weak rain rates). While encouraging improvements in high percentile rainfall intensity have been found as the horizontal resolution of the Community Atmosphere Model is increased to ∼25 km, we demonstrate no corresponding improvement in the moderate rain rates that generate the majority of accumulated rainfall. Using a statistical framework designed to emphasize links between precipitation intensity and accumulated rainfall beyond just the frequency distribution, we show that CAM cannot realistically simulate moderate rain rates, and cannot capture their intensification with climate change, even as resolution is increased. However, by separating the parameterized convective and large‐scale resolved contributions to total rainfall, we find that the intensity, geographic pattern, and climate change response of CAM's large‐scale rain rates are more consistent with observations (TRMM 3B42), superparameterization, and theoretical expectations, despite issues with parameterized convection. Increasing CAM's horizontal resolution does improve the representation of total rainfall intensity, but not due to changes in the intensity of large‐scale rain rates, which are surprisingly insensitive to horizontal resolution. Rather, improvements occur through an increase in the relative contribution of the large‐scale component to the total amount of accumulated rainfall. Analysis of sensitivities to convective timescale and entrainment rate confirm the importance of these parameters in the possible development of scale‐aware parameterizations, but also reveal unrecognized trade‐offs from the entanglement of precipitation frequency and total amount. PMID:29861837

CFD Study of Full-Scale Aerobic Bioreactors: Evaluation of Dynamic O2 Distribution, Gas-Liquid Mass Transfer and Reaction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Humbird, David; Sitaraman, Hariswaran; Stickel, Jonathan

If advanced biofuels are to measurably displace fossil fuels in the near term, they will have to operate at levels of scale, efficiency, and margin unprecedented in the current biotech industry. For aerobically-grown products in particular, scale-up is complex and the practical size, cost, and operability of extremely large reactors is not well understood. Put simply, the problem of how to attain fuel-class production scales comes down to cost-effective delivery of oxygen at high mass transfer rates and low capital and operating costs. To that end, very large reactor vessels (>500 m3) are proposed in order to achieve favorable economiesmore » of scale. Additionally, techno-economic evaluation indicates that bubble-column reactors are more cost-effective than stirred-tank reactors in many low-viscosity cultures. In order to advance the design of extremely large aerobic bioreactors, we have performed computational fluid dynamics (CFD) simulations of bubble-column reactors. A multiphase Euler-Euler model is used to explicitly account for the spatial distribution of air (i.e., gas bubbles) in the reactor. Expanding on the existing bioreactor CFD literature (typically focused on the hydrodynamics of bubbly flows), our simulations include interphase mass transfer of oxygen and a simple phenomenological reaction representing the uptake and consumption of dissolved oxygen by submerged cells. The simulations reproduce the expected flow profiles, with net upward flow in the center of column and downward flow near the wall. At high simulated oxygen uptake rates (OUR), oxygen-depleted regions can be observed in the reactor. By increasing the gas flow to enhance mixing and eliminate depleted areas, a maximum oxygen transfer (OTR) rate is obtained as a function of superficial velocity. These insights regarding minimum superficial velocity and maximum reactor size are incorporated into NREL's larger techno-economic models to supplement standard reactor design equations.« less

Combustion performance and scale effect from N2O/HTPB hybrid rocket motor simulations

NASA Astrophysics Data System (ADS)

Shan, Fanli; Hou, Lingyun; Piao, Ying

2013-04-01

HRM code for the simulation of N2O/HTPB hybrid rocket motor operation and scale effect analysis has been developed. This code can be used to calculate motor thrust and distributions of physical properties inside the combustion chamber and nozzle during the operational phase by solving the unsteady Navier-Stokes equations using a corrected compressible difference scheme and a two-step, five species combustion model. A dynamic fuel surface regression technique and a two-step calculation method together with the gas-solid coupling are applied in the calculation of fuel regression and the determination of combustion chamber wall profile as fuel regresses. Both the calculated motor thrust from start-up to shut-down mode and the combustion chamber wall profile after motor operation are in good agreements with experimental data. The fuel regression rate equation and the relation between fuel regression rate and axial distance have been derived. Analysis of results suggests improvements in combustion performance to the current hybrid rocket motor design and explains scale effects in the variation of fuel regression rate with combustion chamber diameter.

An Integrated Assessment of Location-Dependent Scaling for Microalgae Biofuel Production Facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coleman, Andre M.; Abodeely, Jared; Skaggs, Richard

Successful development of a large-scale microalgae-based biofuels industry requires comprehensive analysis and understanding of the feedstock supply chain—from facility siting/design through processing/upgrading of the feedstock to a fuel product. The evolution from pilot-scale production facilities to energy-scale operations presents many multi-disciplinary challenges, including a sustainable supply of water and nutrients, operational and infrastructure logistics, and economic competitiveness with petroleum-based fuels. These challenges are addressed in part by applying the Integrated Assessment Framework (IAF)—an integrated multi-scale modeling, analysis, and data management suite—to address key issues in developing and operating an open-pond facility by analyzing how variability and uncertainty in space andmore » time affect algal feedstock production rates, and determining the site-specific “optimum” facility scale to minimize capital and operational expenses. This approach explicitly and systematically assesses the interdependence of biofuel production potential, associated resource requirements, and production system design trade-offs. The IAF was applied to a set of sites previously identified as having the potential to cumulatively produce 5 billion-gallons/year in the southeastern U.S. and results indicate costs can be reduced by selecting the most effective processing technology pathway and scaling downstream processing capabilities to fit site-specific growing conditions, available resources, and algal strains.« less

Evaluation of sulfate reduction at experimentally induced mixing interfaces using small-scale push-pull tests in an aquifer-wetland system

USGS Publications Warehouse

Kneeshaw, T.A.; McGuire, J.T.; Smith, E.W.; Cozzarelli, I.M.

2007-01-01

This paper presents small-scale push-pull tests designed to evaluate the kinetic controls on SO42 - reduction in situ at mixing interfaces between a wetland and aquifer impacted by landfill leachate at the Norman Landfill research site, Norman, OK. Quantifying the rates of redox reactions initiated at interfaces is of great interest because interfaces have been shown to be zones of increased biogeochemical transformations and thus may play an important role in natural attenuation. To mimic the aquifer-wetland interface and evaluate reaction rates, SO42 --rich anaerobic aquifer water (??? 100 mg / L SO42 -) was introduced into SO42 --depleted wetland porewater via push-pull tests. Results showed SO42 - reduction was stimulated by the mixing of these waters and first-order rate coefficients were comparable to those measured in other push-pull studies. However, rate data were complex involving either multiple first-order rate coefficients or a more complex rate order. In addition, a lag phase was observed prior to SO42 - reduction that persisted until the mixing interface between test solution and native water was recovered, irrespective of temporal and spatial constraints. The lag phase was not eliminated by the addition of electron donor (acetate) to the injected test solution. Subsequent push-pull tests designed to elucidate the nature of the lag phase support the importance of the mixing interface in controlling terminal electron accepting processes. These data suggest redox reactions may occur rapidly at the mixing interface between injected and native waters but not in the injected bulk water mass. Under these circumstances, push-pull test data should be evaluated to ensure the apparent rate is actually a function of time and that complexities in rate data be considered. ?? 2007 Elsevier Ltd. All rights reserved.

An Evaluation of a Diabetes Self-Management Education (DSME) Intervention Delivered Using Avatar-Based Technology: Certified Diabetes Educators' Ratings and Perceptions.

PubMed

Duncan-Carnesciali, Joanne; Wallace, Barbara C; Odlum, Michelle

2018-06-01

Purpose The purpose of this study was to evaluate the perceptions that certified diabetes educators (CDEs), of diverse health professions, have of a culturally appropriate e-health intervention that used avatar-based technology. Methods Cross-sectional, survey-based design using quantitative and qualitative paradigms. A logic model framed the study, which centered on the broad and general concepts leading to study outcomes. In total, 198 CDEs participated in the evaluation. Participants were mostly female and represented an age range of 26 to 76 years. The profession representative of the sample was registered nurses. Study setting and data collection occurred at https://www.surveymonkey.com/r/AvatarVideoSurvey-for-Certified_Diabetes_Educators . Study instruments used were the Basic Demographics Survey (BD-13), Educational Material Use and Rating of Quality Scale (EMU-ROQ-9), Marlowe-Crowne Social Desirability Survey (MS-SOC-DES-CDE-13), Quality of Avatar Video Rating Scale (QAVRS-7), Recommend Avatar to Patients Scale (RAVTPS-3), Recommend Avatar Video to Health Professionals Scale (RAVTHP-3), and Avatar Video Applications Scale (AVAPP-1). Statistical analysis used included t tests, Pearson product moment correlations, backward stepwise regression, and content/thematic analysis. Results Age, ethnicity, Arab/Middle Eastern, Asian, and white/European descents were significant predictors of a high-quality rating of the video. Thematic and content analysis of the data revealed an overall positive perception of the video. Conclusions An e-health intervention grounded in evidence-based health behavior theories has potential to increase access to diabetes self-management education as evidenced in the ratings and perceptions of the video by CDEs.

Temperament: A Review of Research with Implications for the School Psychologist.

ERIC Educational Resources Information Center

Martin, Roy P.

1983-01-01

Current definitions of temperament are reviewed, and two types of rating scales designed to measure temperamental variables are described. Also, brief reviews of the literature on the relationship of temperament to general cognitive ability, achievement, and psychopathology are presented. Implications for school psychologists are discussed.…

Implementation of a Process for the Design of an Episodic Ethics Assessment Instrument.

ERIC Educational Resources Information Center

DuFrene, Debbie D.; And Others

1993-01-01

Responses from 52 of 174 business faculty and 61 of 203 business practitioners rated important ethical concerns on a Kohlberg-influenced scale. A high degree of consistency between the two samples was found. Environmental, employment, and corporate/individual integrity issues ranked highest. (SK)

Developing a Standardized Letter of Recommendation

ERIC Educational Resources Information Center

Walters, Alyssa M.; Kyllonen, Patrick C.; Plante, Janice W.

2006-01-01

The Standardized Letter of Recommendation (SLR) is a Web-based admission tool designed to replace traditional, narrative letters of recommendation with a more systematic and equitable source of information about applicants to institutions of higher education. The SLR includes a rating scale and open-ended response space that prompt evaluators to…

Building lab-scale x-ray tube based irradiators

USDA-ARS?s Scientific Manuscript database

The construction of economical x-ray tube based irradiators in a variety of configurations is described using 1000 Watt x-ray tubes. Single tube, double tube, and four tube designs are described, as well as various cabinet construction techniques. Relatively high dose rates were achieved for small s...

Designing questionnaires: healthcare survey to compare two different response scales.

PubMed

Dell-Kuster, Salome; Sanjuan, Esteban; Todorov, Atanas; Weber, Heidemarie; Heberer, Michael; Rosenthal, Rachel

2014-08-03

A widely discussed design issue in patient satisfaction questionnaires is the optimal length and labelling of the answering scale. The aim of the present study was to compare intra-individually the answers on two response scales to five general questions evaluating patients' perception of hospital care. Between November 2011 and January 2012, all in-hospital patients at a Swiss University Hospital received a patient satisfaction questionnaire on an adjectival scale with three to four labelled categories (LS) and five redundant questions displayed on an 11-point end-anchored numeric scale (NS). The scales were compared concerning ceiling effect, internal consistency (Cronbach's alpha), individual item answers (Spearman's rank correlation), and concerning overall satisfaction by calculating an overall percentage score (sum of all answers related to the maximum possible sum). The response rate was 41% (2957/7158), of which 2400 (81%) completely filled out all questions. Baseline characteristics of the responders and non-responders were similar. Floor and ceiling effect were high on both response scales, but more pronounced on the LS than on the NS. Cronbach's alpha was higher on the NS than on the LS. There was a strong individual item correlation between both answering scales in questions regarding the intent to return, quality of treatment and the judgement whether the patient was treated with respect and dignity, but a lower correlation concerning satisfactory information transfer by physicians or nurses, where only three categories were available in the LS. The overall percentage score showed a comparable distribution, but with a wider spread of lower satisfaction in the NS. Since the longer scale did not substantially reduce the ceiling effect, the type of questions rather than the type of answering scale could be addressed with a focus on specific questions about concrete situations instead of general questions. Moreover, the low correlation in questions about information provision suggests that only three possible response choices are insufficient. Further investigations are needed to find a more sensitive scale discriminating high-end ratings. Otherwise, a longitudinal within-hospital or a cross-sectional between-hospital comparison of patient care is questionable.

Designing questionnaires: healthcare survey to compare two different response scales

PubMed Central

2014-01-01

Background A widely discussed design issue in patient satisfaction questionnaires is the optimal length and labelling of the answering scale. The aim of the present study was to compare intra-individually the answers on two response scales to five general questions evaluating patients’ perception of hospital care. Methods Between November 2011 and January 2012, all in-hospital patients at a Swiss University Hospital received a patient satisfaction questionnaire on an adjectival scale with three to four labelled categories (LS) and five redundant questions displayed on an 11-point end-anchored numeric scale (NS). The scales were compared concerning ceiling effect, internal consistency (Cronbach’s alpha), individual item answers (Spearman’s rank correlation), and concerning overall satisfaction by calculating an overall percentage score (sum of all answers related to the maximum possible sum). Results The response rate was 41% (2957/7158), of which 2400 (81%) completely filled out all questions. Baseline characteristics of the responders and non-responders were similar. Floor and ceiling effect were high on both response scales, but more pronounced on the LS than on the NS. Cronbach’s alpha was higher on the NS than on the LS. There was a strong individual item correlation between both answering scales in questions regarding the intent to return, quality of treatment and the judgement whether the patient was treated with respect and dignity, but a lower correlation concerning satisfactory information transfer by physicians or nurses, where only three categories were available in the LS. The overall percentage score showed a comparable distribution, but with a wider spread of lower satisfaction in the NS. Conclusions Since the longer scale did not substantially reduce the ceiling effect, the type of questions rather than the type of answering scale could be addressed with a focus on specific questions about concrete situations instead of general questions. Moreover, the low correlation in questions about information provision suggests that only three possible response choices are insufficient. Further investigations are needed to find a more sensitive scale discriminating high-end ratings. Otherwise, a longitudinal within-hospital or a cross-sectional between-hospital comparison of patient care is questionable. PMID:25086869

Spatiotemporal analysis of land use and land cover change in the Brazilian Amazon

PubMed Central

Li, Guiying; Moran, Emilio; Hetrick, Scott

2013-01-01

This paper provides a comparative analysis of land use and land cover (LULC) changes among three study areas with different biophysical environments in the Brazilian Amazon at multiple scales, from per-pixel, polygon, census sector, to study area. Landsat images acquired in the years of 1990/1991, 1999/2000, and 2008/2010 were used to examine LULC change trajectories with the post-classification comparison approach. A classification system composed of six classes – forest, savanna, other-vegetation (secondary succession and plantations), agro-pasture, impervious surface, and water, was designed for this study. A hierarchical-based classification method was used to classify Landsat images into thematic maps. This research shows different spatiotemporal change patterns, composition and rates among the three study areas and indicates the importance of analyzing LULC change at multiple scales. The LULC change analysis over time for entire study areas provides an overall picture of change trends, but detailed change trajectories and their spatial distributions can be better examined at a per-pixel scale. The LULC change at the polygon scale provides the information of the changes in patch sizes over time, while the LULC change at census sector scale gives new insights on how human-induced activities (e.g., urban expansion, roads, and land use history) affect LULC change patterns and rates. This research indicates the necessity to implement change detection at multiple scales for better understanding the mechanisms of LULC change patterns and rates. PMID:24127130

Prevalence and risk factors of agitation in newly hospitalized schizophrenia patients in China: An observational survey.

PubMed

Mi, Weifeng; Zhang, Suzhen; Liu, Qi; Yang, Fude; Wang, Yong; Li, Tao; Mei, Qiyi; He, Hongbo; Chen, Zhiyu; Su, Zhonghua; Liu, Tiebang; Xie, Shiping; Tan, Qingrong; Zhang, Jinbei; Zhang, Congpei; Sang, Hong; Chen, Wenhao; Shi, Le; Li, Lingzhi; Shi, Ying; Guo, Lihua; Zhang, Hongyan; Lu, Lin

2017-07-01

This multi-center observational study investigated the prevalence of agitation in newly hospitalized schizophrenia patients in China and its potential risk factors. It was performed in 2014 and covered 14 hospitals. Newly hospitalized patients with schizophrenia or suspected schizophrenia who met the diagnostic criteria of the International Statistical Classification of Diseases and Related Health Problems, 10th revision, were recruited. Agitation and related risk factors were evaluated by a questionnaire designed for the survey. General demographic data, disease characteristics, scores on schizophrenia rating scales and agitation rating scales (e.g., Positive and Negative Syndrome Scale-Excited Component [PANSS-EC] and Behavioral Activity Rating Scale [BARS]) were collected. Among the 1512 patients screened in the study, 1400 (92.59%) were eligible. According to the PANSS-EC and BARS, the prevalence of agitation was 60.92% (853 of 1400) and 59.00% (826 of 1400), respectively. The overall prevalence of agitation was 47.50% (665 of 1400). The most important risk factor of agitation was being aggressive at baseline (Modified Overt Aggression Scale score ≥4, odds ratio=6.54; 95% confidence interval=4.93-8.69). Other risk factors included a history of aggressive behavior, northern region of residence, involuntary hospitalization, disease severity, low level of education, living alone, being unemployed or retired. Copyright © 2017. Published by Elsevier B.V.

Bioreactor design studies for a hydrogen-producing bacterium.

PubMed

Wolfrum, Edward J; Watt, Andrew S

2002-01-01

Carbon monoxide (CO) can be metabolized by a number of microorganisms along with water to produce hydrogen (H2) and carbon dioxide. National Renewable Energy Laboratory researchers have isolated a number of bacteria that perform this so-called water-gas shift reaction at ambient temperatures. We performed experiments to measure the rate of CO conversion and H2 production in a trickle-bed reactor (TBR). The liquid recirculation rate and the reactor support material both affected the mass transfer coefficient, which controls the overall performance of the reactor. A simple reactor model taken from the literature was used to quantitatively compare the performance of the TBR geometry at two different size scales. Good agreement between the two reactor scales was obtained.

Biogasification of community-derived biomass and solid wastes in a pilot-scale SOLCON reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Srivastava, V.J.; Biljetina, R.; Isaacson, H.R.

1988-01-01

The Institute of Gas Technology has developed a novel, solids- concentrating (SOLCON) bioreactor to convert a variety of individual or mixed feedstocks (biomass and wastes) to methane at higher rates and efficiencies than those obtained from conventional high-rate anaerobic digesters. The biogasification studies are being conducted in a pilot-scale experimental test unit (ETU) located in the Walt Disney World Resort Complex, Orlando, Florida. This paper describes the ETU facility, the logistics of feedstock integration, the SOLCON reactor design and operating techniques, and the results obtained during 4 years of stable, uninterrupted operation with different feedstocks. The SOLCON reactor consistently outperformedmore » the conventional stirred-tank reactor by 20% to 50%.« less

Development of an Intermediate-Scale Aerobic Bioreactor to Regenerate Nutrients from Inedible Crop Residues

NASA Technical Reports Server (NTRS)

Finger, Barry W.; Strayer, Richard F.

1994-01-01

Three Intermediate-Scale Aerobic Bioreactors were designed, fabricated, and operated. They utilized mixed microbial communities to bio-degrade plant residues. The continuously stirred tank reactors operated at a working volume of 8 L, and the average oxygen mass transfer coefficient, k(sub L)a, was 0.01 s(exp -1). Mixing time was 35 s. An experiment using inedible wheat residues, a replenishment rate of 0.125/day, and a solids loading rate of 20 gdw/day yielded a 48% reduction in biomass. Bioreactor effluent was successfully used to regenerate a wheat hydroponic nutrient solution. Over 80% of available potassium, calcium, and other minerals were recovered and recycled in the 76-day wheat growth experiment.

ATLAS Data Management Accounting with Hadoop Pig and HBase

NASA Astrophysics Data System (ADS)

Lassnig, Mario; Garonne, Vincent; Dimitrov, Gancho; Canali, Luca

2012-12-01

The ATLAS Distributed Data Management system requires accounting of its contents at the metadata layer. This presents a hard problem due to the large scale of the system, the high dimensionality of attributes, and the high rate of concurrent modifications of data. The system must efficiently account more than 90PB of disk and tape that store upwards of 500 million files across 100 sites globally. In this work a generic accounting system is presented, which is able to scale to the requirements of ATLAS. The design and architecture is presented, and the implementation is discussed. An emphasis is placed on the design choices such that the underlying data models are generally applicable to different kinds of accounting, reporting and monitoring.

Numerical and experimental investigation of downdraft gasification of woody residues.

PubMed

Simone, Marco; Nicolella, Cristiano; Tognotti, Leonardo

2013-04-01

A pilot scale throated downdraft gasifier was operated with vine prunings as feedstock to assess the effect of biomass loading rate on process performance. A distributed 1D model of mass and heat transfer and reactions was applied to aid the interpretation of experimental evidence. The model takes into account peculiar gasifier design features (air inlets and throat) and it reproduces satisfactorily the temperature profiles and the mass fluxes of gaseous species at different biomass loading rates. The integration of pilot-scale experiments and numerical simulations provides sound indications for the gasifier operation. In particular, simulations performed at different loading rates and feedstock humidity show that steady state operation and stable performance of the gasifier rely on the thermal balance between the enthalpy of cold biomass moving downward and the counter-current radiative heat fluxes moving upward from the oxidation zone. This balance can be destabilized by high loading rate and moisture contents. Copyright © 2013 Elsevier Ltd. All rights reserved.

Effect of pipe corrosion scales on chlorine dioxide consumption in drinking water distribution systems.

PubMed

Zhang, Zhe; Stout, Janet E; Yu, Victor L; Vidic, Radisav

2008-01-01

Previous studies showed that temperature and total organic carbon in drinking water would cause chlorine dioxide (ClO(2)) loss in a water distribution system and affect the efficiency of ClO(2) for Legionella control. However, among the various causes of ClO(2) loss in a drinking water distribution system, the loss of disinfectant due to the reaction with corrosion scales has not been studied in detail. In this study, the corrosion scales from a galvanized iron pipe and a copper pipe that have been in service for more than 10 years were characterized by energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD). The impact of these corrosion scale materials on ClO(2) decay was investigated in de-ionized water at 25 and 45 degrees C in a batch reactor with floating glass cover. ClO(2) decay was also investigated in a specially designed reactor made from the iron and copper pipes to obtain more realistic reaction rate data. Goethite (alpha-FeOOH) and magnetite (Fe(3)O(4)) were identified as the main components of iron corrosion scale. Cuprite (Cu(2)O) was identified as the major component of copper corrosion scale. The reaction rate of ClO(2) with both iron and copper oxides followed a first-order kinetics. First-order decay rate constants for ClO(2) reactions with iron corrosion scales obtained from the used service pipe and in the iron pipe reactor itself ranged from 0.025 to 0.083 min(-1). The decay rate constant for ClO(2) with Cu(2)O powder and in the copper pipe reactor was much smaller and it ranged from 0.0052 to 0.0062 min(-1). Based on these results, it can be concluded that the corrosion scale will cause much more significant ClO(2) loss in corroded iron pipes of the distribution system than the total organic carbon that may be present in finished water.

The role and benefits of accessing primary care patient records during unscheduled care: a systematic review.

PubMed

Bowden, Tom; Coiera, Enrico

2017-09-22

The purpose of this study was to assess the impact of accessing primary care records on unscheduled care. Unscheduled care is typically delivered in hospital Emergency Departments. Studies published to December 2014 reporting on primary care record access during unscheduled care were retrieved. Twenty-two articles met inclusion criteria from a pool of 192. Many shared electronic health records (SEHRs) were large in scale, servicing many millions of patients. Reported utilization rates by clinicians was variable, with rates >20% amongst health management organizations but much lower in nation-scale systems. No study reported on clinical outcomes or patient safety, and no economic studies of SEHR access during unscheduled care were available. Design factors that may affect utilization included consent and access models, SEHR content, and system usability and reliability. Despite their size and expense, SEHRs designed to support unscheduled care have been poorly evaluated, and it is not possible to draw conclusions about any likely benefits associated with their use. Heterogeneity across the systems and the populations they serve make generalization about system design or performance difficult. None of the reviewed studies used a theoretical model to guide evaluation. Value of Information models may be a useful theoretical approach to design evaluation metrics, facilitating comparison across systems in future studies. Well-designed SEHRs should in principle be capable of improving the efficiency, quality and safety of unscheduled care, but at present the evidence for such benefits is weak, largely because it has not been sought.

Effects of dose scaling on delivery quality assurance in tomotherapy

PubMed Central

Nalichowski, Adrian; Burmeister, Jay

2012-01-01

Delivery quality assurance (DQA) of tomotherapy plans is routinely performed with silver halide film which has a limited range due to the effects of saturation. DQA plans with dose values exceeding this limit require the dose of the entire plan to be scaled downward if film is used, to evaluate the dose distribution in two dimensions. The potential loss of fidelity between scaled and unscaled DQA plans as a function of dose scaling is investigated. Three treatment plans for 12 Gy fractions designed for SBRT of the lung were used to create DQA procedures that were scaled between 100% and 10%. The dose was measured with an ionization chamber array and compared to values from the tomotherapy treatment planning system. Film and cylindrical ion chamber measurements were also made for one patient for scaling factors of 50% to 10% to compare with the ionization chamber array measurements. The array results show the average gamma pass rate is ≥99% from 100% to 30% scaling. The average gamma pass rate falls to 93.6% and 51.1% at 20% and 10% scaling, respectively. Film analysis yields similar pass rates. Cylindrical ion chambers did not exhibit significant variation with dose scaling, but only represent points in the low gradient region of the dose distribution. Scaling the dose changes the mechanics of the radiation delivery, as well as the signal‐to‐noise ratio. Treatment plans which exhibit parameters that differ significantly from those common to DQA plans studied in this paper may exhibit different behavior. Dose scaling should be limited to the smallest degree possible. Planar information, such as that from film or a detector array, is required. The results show that it is not necessary to perform both a scaled and unscaled DQA plan for the treatment plans considered here. PACS numbers: 87.55.km, 87.55.Qr PMID:22231213

Dual Temporal Scale Convolutional Neural Network for Micro-Expression Recognition.

PubMed

Peng, Min; Wang, Chongyang; Chen, Tong; Liu, Guangyuan; Fu, Xiaolan

2017-01-01

Facial micro-expression is a brief involuntary facial movement and can reveal the genuine emotion that people try to conceal. Traditional methods of spontaneous micro-expression recognition rely excessively on sophisticated hand-crafted feature design and the recognition rate is not high enough for its practical application. In this paper, we proposed a Dual Temporal Scale Convolutional Neural Network (DTSCNN) for spontaneous micro-expressions recognition. The DTSCNN is a two-stream network. Different of stream of DTSCNN is used to adapt to different frame rate of micro-expression video clips. Each stream of DSTCNN consists of independent shallow network for avoiding the overfitting problem. Meanwhile, we fed the networks with optical-flow sequences to ensure that the shallow networks can further acquire higher-level features. Experimental results on spontaneous micro-expression databases (CASME I/II) showed that our method can achieve a recognition rate almost 10% higher than what some state-of-the-art method can achieve.

Observations of the birth of a small coronal hole

NASA Technical Reports Server (NTRS)

Solodyna, C. V.; Krieger, A. S.; Nolte, J. T.

1977-01-01

Using soft X-ray data from the S-054 X-ray spectrographic telescope aboard Skylab, we observed temporal changes in the emission structure of the X-ray corona associated with the birth of a small coronal hole. Designated as CH6, this coronal hole was born near the equator in a time interval less than 9-1/2 hr. By constructing a light curve for a point near the center of CH6, we observed a sudden 40% decrease in X-ray emission associated with the birth of this coronal hole. On a time scale of hours, the growth of CH6 in area proceeded faster than the average rate predicted by the diffusion of solar fields. The short term decay of CH6 followed the diffusive rate to within experimental uncertainty. On a time scale of one rotation, the subsequent development of CH6 was not consistent with steady growth at the average rate predicted by diffusion.

[Pilot-scale opposite folded plate hybrid anaerobic reactor (OFPHAR) in treatment of sewage].

PubMed

Han, Xiang-Kui; Ye, Chang-Bing; Zhuang, Jin-Peng; Bi, Dong; Wang, Lei

2008-11-01

Based on the theories of mass-transfer and two-double integrated staged multi-phase anaerobe (TSMPA), a pilot-scale opposite folded plate hybrid anaerobic reactor (OFPHAR) was designed to treat low concentration sewage. All the trial lasted 12 months and the results indicated that the optimal HRT was 6h. At this HRT, the COD, TP and TN removal rate were 78.58%, 35.15%, 39.17%, respectively, at 25 degrees C +/- 2 degrees C. The optimal rate of anaerobic section was 45%-65%. Controlled HRT = 6 h, the COD, TP and TN removal rate were 64.37%, 20.72%, 23.65%, respectively, and the specific methane production capacity were 1.85 mL/(g x h) when the temperature decreased to 7 degrees C. The results of trial indicated that apply this OFPHAR to treat low concentration sewage at low temperature in north China is feasible.

Small-Scale Hybrid Rocket Test Stand & Characterization of Swirl Injectors

NASA Astrophysics Data System (ADS)

Summers, Matt H.

Derived from the necessity to increase testing capabilities of hybrid rocket motor (HRM) propulsion systems for Daedalus Astronautics at Arizona State University, a small-scale motor and test stand were designed and developed to characterize all components of the system. The motor is designed for simple integration and setup, such that both the forward-end enclosure and end cap can be easily removed for rapid integration of components during testing. Each of the components of the motor is removable allowing for a broad range of testing capabilities. While examining injectors and their potential it is thought ideal to obtain the highest regression rates and overall motor performance possible. The oxidizer and fuel are N2O and hydroxyl-terminated polybutadiene (HTPB), respectively, due to previous experience and simplicity. The injector designs, selected for the same reasons, are designed such that they vary only in the swirl angle. This system provides the platform for characterizing the effects of varying said swirl angle on HRM performance.

Standing wave design and experimental validation of a tandem simulated moving bed process for insulin purification.

PubMed

Xie, Yi; Mun, Sungyong; Kim, Jinhyun; Wang, Nien-Hwa Linda

2002-01-01

A tandem simulated moving bed (SMB) process for insulin purification has been proposed and validated experimentally. The mixture to be separated consists of insulin, high molecular weight proteins, and zinc chloride. A systematic approach based on the standing wave design, rate model simulations, and experiments was used to develop this multicomponent separation process. The standing wave design was applied to specify the SMB operating conditions of a lab-scale unit with 10 columns. The design was validated with rate model simulations prior to experiments. The experimental results show 99.9% purity and 99% yield, which closely agree with the model predictions and the standing wave design targets. The agreement proves that the standing wave design can ensure high purity and high yield for the tandem SMB process. Compared to a conventional batch SEC process, the tandem SMB has 10% higher yield, 400% higher throughput, and 72% lower eluant consumption. In contrast, a design that ignores the effects of mass transfer and nonideal flow cannot meet the purity requirement and gives less than 96% yield.

Monitoring survival rates of landbirds at varying spatial scales: An application of the MAPS Program

USGS Publications Warehouse

Rosenberg, D.K.; DeSante, D.F.; Hines, J.E.; Bonney, Rick; Pashley, David N.; Cooper, Robert; Niles, Larry

2000-01-01

Survivorship is a primary demographic parameter affecting population dynamics, and thus trends in species abundance. The Monitoring Avian Productivity and Survivorship (MAPS) program is a cooperative effort designed to monitor landbird demographic parameters. A principle goal of MAPS is to estimate annual survivorship and identify spatial patterns and temporal trends in these rates. We evaluated hypotheses of spatial patterns in survival rates among a collection of neighboring sampling sites, such as within national forests, among biogeographic provinces, and between breeding populations that winter in either Central or South America, and compared these geographic-specific models to a model of a common survival rate among all sampling sites. We used data collected during 1992-1995 from Swainson's Thrush (Cathorus ustulatus) populations in the western region of the United States. We evaluated the ability to detect spatial and temporal patterns of survivorship with simulated data. We found weak evidence of spatial differences in survival rates at the local scale of 'location,' which typically contained 3 mist-netting stations. There was little evidence of differences in survival rates among biogeographic provinces or between populations that winter in either Central or South America. When data were pooled for a regional estimate of survivorship, the percent relative bias due to pooling 'locations' was 12 years of monitoring. Detection of spatial patterns and temporal trends in survival rates from local to regional scales will provide important information for management and future research directed toward conservation of landbirds.

Using 4+ to grade near-normal muscle strength does not improve agreement.

PubMed

O'Neill, Søren; Jaszczak, Sofie Louise Thomsen; Steffensen, Anne Katrine Søndergaard; Debrabant, Birgit

2017-01-01

Manual assessment of muscle strength is often graded using the ordinal Medical Research Council (MRC) scale. The scale has a number of inherent weaknesses, including poorly defined limits between grades '4' and '5' and very large differences in the span of muscle strength encompassed by each of the six grades. It is not necessarily obvious how to convert a manual muscle test finding into an MRC grade. Several modifications which include intermediate grades have been suggested to improve the MRC scale and the current study examines whether agreement improves and variation in ratings decrease, with an intermediate grade between '4' and '5', in circumstances where such a grade would seem appropriate. The present study examined the hypothesis, that a modified MRC-scale which included the commonly used '4+' option, resulted in greater agreement between clinicians compared to the standard MRC-scale. A questionnaire containing five simple clinical cases were distributed to a large convenience sample of chiropractors in Northern Europe, with instructions to grade the described muscle strength findings using the MRC scale. The scale was adapted (with/without an intermediate '4+' grade) depending on the preference of the individual respondent. The cases were designed in such a way as to suggest a muscle weakness in the grey area between '4' and '5', i.e. grade '4+' on the modified MRC scale. A total of 225 questionnaires were returned (7% response rate). The average percentage agreement (across cases) in the standard MRC group was 64% [range 51%: 73%] (grade '4' in all cases). In the modified MRC group, the corresponding findings was 48% [38%: 74%] (grade '4' or '4+' in all cases). The mean average deviation analogue in the standard MRC group was 0.34 (range 0.34: 0.40), compared to 0.51 (range 0.39: 0.73) in the modified MRC group, indicating greater dispersion of scores in the modified MRC group. The Fleiss kappa was 0.02 ( p  < 0.001) and 0.13 ( p  < 0.001), respectively. Contrary to the original hypothesis, introduction of a '4+' grade did not clearly improve agreement or variability of ratings, despite eliminating the physical muscle testing by providing written descriptions of test findings and specifically designing these to suggest a weakness of grade '4+'.

Triaxial digital fluxgate magnetometer for NASA applications explorer mission: Results of tests of critical elements

NASA Technical Reports Server (NTRS)

Mcleod, M. G.; Means, J. D.

1977-01-01

Tests performed to prove the critical elements of the triaxial digital fluxgate magnetometer design were described. A method for improving the linearity of the analog to digital converter portion of the instrument was studied in detail. A sawtooth waveform was added to the signal being measured before the A/D conversion, and averaging the digital readings over one cycle of the sawtooth. It was intended to reduce bit error nonlinearities present in the A/D converter which could be expected to be as much as 16 gamma if not reduced. No such nonlinearities were detected in the output of the instrument which included the feature designed to reduce these nonlinearities. However, a small scale nonlinearity of plus or minus 2 gamma with a 64 gamma repetition rate was observed in the unit tested. A design improvement intended to eliminate this small scale nonlinearity was examined.

Design of the Brine Evaporation Bag for Increased Water Recovery in Microgravity

NASA Technical Reports Server (NTRS)

Hayden, Anna L.; Delzeit, Lance D.

2015-01-01

The existing water recovery system on the International Space Station (ISS) is limited to 75% reclamation; consequently, long duration space missions are currently unfeasible due to the large quantity of water necessary to sustain the crew. The Brine Evaporation Bag (BEB) is a proposed system to supplement the existing water recovery system aboard the ISS that can to increase water recovery to 99%. The largest barrier to high water recovery is mineral scaling inside the water recovery equipment, which leads to equipment failure; therefore, some water must remain to keep the minerals dissolved. This waste stream is liquid brine containing salts, acids, organics, and water. The BEB is designed to recover this remaining water while protecting the equipment from scale. The BEB consists of a sealed bag containing a hydrophobic membrane that allows water vapor and gas to pass through. It is operated under vacuum, heated, and continuously filled with brine to boil away the water. The water vapor is recovered and the solids are contained inside the bag for disposal. The BEB can dry the brine to a solid block. Ongoing work includes improving the design of the BEB and the evaporator to prevent leaks, maximize the rate of water removal, and minimize energy use and weight. Additional testing will determine whether designs are heat- or mass-transfer limited and the optimal water recovery rate.

Neurofibrillary Tangle Stage and the Rate of Progression of Alzheimer Symptoms: Modeling Using an Autopsy Cohort and Application to Clinical Trial Design

PubMed Central

Qian, Jing; T.Hyman, Bradley; Betensky, Rebecca A.

2017-01-01

Importance The heterogeneity of rate of clinical progression among patients with Alzheimer disease leads to difficulty in providing clinical counseling and diminishes the power of clinical trials using disease-modifying agents. Objective To gain a better understanding of the factors that affect the natural history of progression in Alzheimer disease for the purpose of improving both clinical care and clinical trial design. Design, Setting, and Participants A longitudinal cohort study of aging from 2005 to 2014 in the National Alzheimer Coordinating Center. Clinical evaluation of the participants was conducted in 31 National Institute on Aging’s Alzheimer Disease Centers. Nine hundred eighty-four participants in the National Alzheimer Coordinating Center cohort study who died and underwent autopsy and met inclusion and exclusion criteria. Main Outcomes and Measures We sought to model the possibility that knowledge of neurofibrillary tangle burden in the presence of moderate or frequent plaques would add to the ability to predict clinical rate of progression during the ensuing 2 to 3 years. We examined the National Alzheimer Coordinating Center autopsy data to evaluate the effect of different neurofibrillary tangle stages on the rates of progression on several standard clinical instruments: the Clinical Dementia Rating Scale sum of boxes, a verbal memory test (logical memory), and a controlled oral word association task (vegetable naming), implementing a reverse-time longitudinal modeling approach in conjunction with latent class estimation to adjust for unmeasured sources of heterogeneity. Results Several correlations between clinical variables and neurocognitive performance suggest a basis for heterogeneity: Higher education level was associated with lower Clinical Dementia Rating Scale sum of boxes (β = −0.19; P < .001), and frequent vs moderate neuritic plaques were associated with higher Clinical Dementia Rating Scale sum of boxes (β = 1.64; P < .001) and lower logical memory score (β = −1.07; P = .005). The rate of change of the clinical and cognitive scores varied depending on Braak stage, when adjusting for plaques, age of death, sex, education, and APOE genotype. For example, comparing high vs low Braak stage with other variables fixed, the logical memory score decreased a substantial 0.38 additional units per year (95% CI, −0.70 to −0.06; P = .02). Using these data, we estimate that a 300-participant clinical trial with end point of a 20% improvement in slope in rate of change of Clinical Dementia Rating Scale sum of boxes has 89% power when all participants in the trial are from the high Braak stage, compared with 29% power if Braak stage had not used for eligibility. Conclusions and Relevance We found that knowledge of neurofibrillary tangle stage, modeled as the sort of information that could be available from tau positron-emission tomography scans and its use to determine eligibility to a trial, could dramatically improve the power of clinical trials and equivalently reduce the required sample sizes of clinical trials. PMID:28288263

Laboratory Scale Coal And Biomass To Drop-In Fuels (CBDF) Production And Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lux, Kenneth; Imam, Tahmina; Chevanan, Nehru

This Final Technical Report describes the work and accomplishments of the project entitled, “Laboratory Scale Coal and Biomass to Drop-In Fuels (CBDF) Production and Assessment.” The main objective of the project was to fabricate and test a lab-scale liquid-fuel production system using coal containing different percentages of biomass such as corn stover and switchgrass at a rate of 2 liters per day. The system utilizes the patented Altex fuel-production technology, which incorporates advanced catalysts developed by Pennsylvania State University. The system was designed, fabricated, tested, and assessed for economic and environmental feasibility relative to competing technologies.

Validation of the Family Meeting Behavioral Skills Checklist. An Instrument to Assess Fellows' Communication Skills.

PubMed

Gustin, Jillian L; Way, David P; Wells-Di Gregorio, Sharla; McCallister, Jennifer W

2016-08-01

Fellows in pulmonary and critical care medicine are required to show competency in facilitating family meetings for critically ill patients. There are many assessment measures available for evaluating physician-patient communication (e.g., the SEGUE Framework [Set the stage, Elicit information, Give information, Understand the patient's perspective, End the encounter]) and some designed for family meetings. However, no validated measure exists that is specifically designed to assess communication skills during family meetings with surrogate decision makers in intensive care settings. We developed the Family Meeting Behavioral Skills Checklist (FMBSC) to measure advanced communication skills of fellows in family meetings of critically ill patients based on a literature review and consensus of an interdisciplinary group of communications experts. We evaluated the psychometric properties of the FMBSC. We digitally recorded 16 pulmonary/critical care fellows performing a simulated family meeting for a critically ill patient at the end of 1 year of fellowship training. Two clinical health psychologists evaluated each recording independently using the FMBSC Rating Scale and the SEGUE Framework. Judges recorded the number of skills performed using the checklist and employed a summary rating scale to judge the level of performance for each of nine subsets of skills. Each instrument was scored and converted to percentage scores. The FMBSC and SEGUE Framework items were summed and converted to percentage scores for each category and as a total for each instrument. The rating scale items on the FMBSC were also summed and converted to a percentage score. Four primary analyses were conducted to evaluate interjudge reliability, internal consistency, and concurrent validity. Interrater reliability was higher for the FMBSC (intraclass correlation [ICC2,2] = 0.57) than for the SEGUE instrument (ICC2,2 = 0.32) or the FMBSC Rating Scale (ICC2,2 = 0.23). The FMBSC demonstrated evidence of concurrent validity through high positive correlations with both the FMBSC Rating Scale and the SEGUE instrument (r = +0.83, P ≤ 0.01; r = +0.65, P ≤ 0.01 respectively). All but one of the nine subscales on the FMBSC showed adequate internal consistency (reliabilities ranged from 0.18 to 0.68). Interjudge reliability was higher for the FMBSC (ICC2,2 = 0.57) than for the SEGUE instrument (ICC2,2 = 0.32) or the FMBSC Rating Scale (ICC2,2 = 0.23). The FMBSC demonstrated internal consistency and structural validity in assessing advanced communication skills of fellows in facilitating family meetings of critically ill patients in the ICU. Interjudge reliability was better for the FMBS Checklist than it was for the other measures.

The Development and Validation of the Memory Support Rating Scale (MSRS)

PubMed Central

Lee, Jason Y.; Worrell, Frank C.; Harvey, Allison G.

2015-01-01

Patient memory for treatment information is poor, and worse memory for treatment information is associated with poorer clinical outcomes. Memory support techniques have been harnessed to improve patient memory for treatment. However, a measure of memory support used by treatment providers during sessions has yet to be established. The present study reports on the development and psychometric properties of the Memory Support Rating Scale (MSRS) – an observer-rated scale designed to measure memory support. Forty-two adults with major depressive disorder (MDD) were randomized to either cognitive therapy plus memory support (CS+MS; n = 22) or cognitive therapy as-usual (CT-as-usual; n = 20). At post-treatment, patients freely recalled treatment points via the Patient Recall Task. Sessions (n = 171) were coded for memory support using the MSRS, 65% of which were also assessed for the quality of cognitive therapy via the Cognitive Therapy Rating Scale (CTRS). A unidimensional scale composed of 8 items was developed using exploratory factor analysis, though a larger sample is needed to further assess the factor structure of MSRS scores. High inter-rater and test-retest reliabilities of MSRS scores were observed across seven MSRS coders. MSRS scores were higher in the CT+MS condition compared to CT-as-usual, demonstrating group differentiation ability. MSRS scores were positively associated with Patient Recall Task scores but not associated with CTRS scores, demonstrating convergent and discriminant validity, respectively. Results indicate that the MSRS yields reliable and valid scores for measuring treatment providers’ use of memory support while delivering cognitive therapy. PMID:26389597

The development and validation of the Memory Support Rating Scale.

PubMed

Lee, Jason Y; Worrell, Frank C; Harvey, Allison G

2016-06-01

Patient memory for treatment information is poor, and worse memory for treatment information is associated with poorer clinical outcomes. Memory support techniques have been harnessed to improve patient memory for treatment. However, a measure of memory support used by treatment providers during sessions has yet to be established. The present study reports on the development and psychometric properties of the Memory Support Rating Scale (MSRS)-an observer-rated scale designed to measure memory support. Adults with major depressive disorder (MDD; N = 42) were randomized to either cognitive therapy plus memory support (CT + MS; n = 22) or cognitive therapy as-usual (CT-as-usual; n = 20). At posttreatment, patients freely recalled treatment points via the patient recall task. Sessions (n = 171) were coded for memory support using the MSRS, 65% of which were also assessed for the quality of cognitive therapy via the Cognitive Therapy Rating Scale (CTRS). A unidimensional scale composed of 8 items was developed using exploratory factor analysis, though a larger sample is needed to further assess the factor structure of MSRS scores. High interrater and test-retest reliabilities of MSRS scores were observed across 7 MSRS coders. MSRS scores were higher in the CT + MS condition compared with CT-as-usual, demonstrating group differentiation ability. MSRS scores were positively associated with patient recall task scores but not associated with CTRS scores, demonstrating convergent and discriminant validity, respectively. Results indicate that the MSRS yields reliable and valid scores for measuring treatment providers' use of memory support while delivering cognitive therapy. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Factors Influencing Patient Selection of a Foot and Ankle Surgeon.

PubMed

Manning, Blaine T; Bohl, Daniel D; Wang, Kevin C; Hamid, Kamran S; Holmes, George B; Lee, Simon

2017-09-01

An increasingly consumer-centric health insurance market has empowered patients to select the providers of their choice. There is a lack of studies investigating the rationale by which patients select a foot and ankle surgeon. In the present study, 824 consecutive new patients seeking treatment from 3 foot-ankle surgeons were consecutively administered an anonymous questionnaire prior to their first appointment. It included rating the importance of 15 factors regarding specialist selection on a 1 to 10 scale, with 10 designated " Very important" and 1 designated " Not important at all." The remaining questions were multiple choice regarding patient perspectives on other surgeon aspects (appointment availability, waiting room times, clinic proximity, etc). Of 824 consecutive patients administered the survey, 305 (37%) responded. Patients rated board certification (9.24 ± 1.87) and on-site imaging availability (8.48 ± 2.37)-on a 1 to 10 scale, with 10 designated "Very important- as the 2 most important criteria in choosing a foot and ankle surgeon. Patients rated advertisements as least important. Among the patients, 91% responded that a maximum of 30 minutes should elapse between clinic check-in and seeing their physician; 61% responded that a maximum of 20 minutes should elapse between clinic check-in and seeing their physician. In the context of an increasingly consumer-driven paradigm of health care delivery and reimbursement, it is important to understand patients' preferences in specialist selection. Level III: Prospective questionnaire.

Design of the Blood Pressure Goals in Dialysis pilot study.

PubMed

Gul, Ambreen; Miskulin, Dana; Gassman, Jennifer; Harford, Antonia; Horowitz, Bruce; Chen, Joline; Paine, Susan; Bedrick, Edward; Kusek, John W; Unruh, Mark; Zager, Philip

2014-02-01

Cardiovascular disease (CVD) is markedly increased among hemodialysis (HD) patients. Optimizing blood pressure (BP) among HD patients may present an important opportunity to reduce the disparity in CVD rates between HD patients and the general population. The optimal target predialysis systolic BP (SBP) among HD patients is unknown. Current international guidelines, calling for a predialysis SBP < 140 mm Hg, are based on the opinion and extrapolation from the general population. Existing randomized controlled trials (RCTs) were small and did not include prespecified BP targets. The authors described the design of the Blood Pressure in Dialysis (BID) Study, a pilot, multicenter RCT where HD patients are randomized to either a target-standardized predialysis SBP of 110 to 140 mm Hg or 155 to 165 mm Hg. This is the first study to randomize HD patients to 2 different SBP targets. Primary outcomes are feasibility and safety. Feasibility parameters include recruitment and retention rates, adherence with prescribed BP measurements and achievement and maintenance of selected BP targets. Safety parameters include rates of hypotension and other adverse and serious adverse events. The authors obtained preliminary data on changes in left ventricular mass, aortic pulse wave velocity, vascular access thromboses and health-related quality of life across study arms, which may be the secondary outcomes in the full-scale study. The data acquired in the pilot RCT will determine the feasibility and safety and inform the design of a full-scale trial, powered for hard outcomes, which may require 2000 participants.

Plasma Amyloid β-Protein and C-reactive Protein in Relation to the Rate of Progression of Alzheimer Disease

PubMed Central

Locascio, Joseph J.; Fukumoto, Hiroaki; Yap, Liang; Bottiglieri, Teodoro; Growdon, John H.; Hyman, Bradley T.; Irizarry, Michael C.

2008-01-01

Objective To examine whether plasma markers of amyloid precursor protein metabolism (amyloid β-protein ending in Val-40 [Aβ40] and Ala-42 [Aβ42]), inflammation (high-sensitivity C-reactive protein), and folic acid metabolism (folic acid, vitamin B12, and total homocysteine levels) are associated with the rate of cognitive and functional decline in persons with Alzheimer disease. Design Longitudinal study across a mean (SD) of 4.2 (2.6) years with assessments at approximately 6- to 12- month intervals. Setting Out patient care. Patients A cohort of 122 patients having a clinical diagnosis of probable Alzheimer disease, each with at least 2 assessments across time. Main Outcome Measures Scores on the cognitive Information-Memory-Concentration subscale of the Blessed Dementia Scale and the functional Weintraub Activities of Daily Living Scale. Results Low plasma levels of Aβ40, Aβ42, and high-sensitivity C-reactive protein were associated with a significantly more rapid cognitive decline, as indexed using the Blessed Dementia Scale, than were high levels. Low levels of Aβ42 and high-sensitivity C-reactive protein were significantly associated with more rapid functional decline on the Weintraub Activities of Daily Living Scale than were high levels. These plasma markers contributed about 5% to 12% of the variance accounted for on the Blessed Dementia Scale and the Activities of Daily Living Scale by fixed-effects predictors. Measures of folic acid metabolism were not associated with changes on either the Blessed Dementia Scale or the Activities of Daily Living Scale. Conclusions Plasma markers of amyloid precursor protein metabolism and C-reactive protein may be associated with the rate of cognitive and functional decline in patients with Alzheimer disease. PMID:18541797

Resilience Design Patterns - A Structured Approach to Resilience at Extreme Scale (version 1.1)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hukerikar, Saurabh; Engelmann, Christian

Reliability is a serious concern for future extreme-scale high-performance computing (HPC) systems. Projections based on the current generation of HPC systems and technology roadmaps suggest the prevalence of very high fault rates in future systems. The errors resulting from these faults will propagate and generate various kinds of failures, which may result in outcomes ranging from result corruptions to catastrophic application crashes. Therefore the resilience challenge for extreme-scale HPC systems requires management of various hardware and software technologies that are capable of handling a broad set of fault models at accelerated fault rates. Also, due to practical limits on powermore » consumption in HPC systems future systems are likely to embrace innovative architectures, increasing the levels of hardware and software complexities. As a result the techniques that seek to improve resilience must navigate the complex trade-off space between resilience and the overheads to power consumption and performance. While the HPC community has developed various resilience solutions, application-level techniques as well as system-based solutions, the solution space of HPC resilience techniques remains fragmented. There are no formal methods and metrics to investigate and evaluate resilience holistically in HPC systems that consider impact scope, handling coverage, and performance & power efficiency across the system stack. Additionally, few of the current approaches are portable to newer architectures and software environments that will be deployed on future systems. In this document, we develop a structured approach to the management of HPC resilience using the concept of resilience-based design patterns. A design pattern is a general repeatable solution to a commonly occurring problem. We identify the commonly occurring problems and solutions used to deal with faults, errors and failures in HPC systems. Each established solution is described in the form of a pattern that addresses concrete problems in the design of resilient systems. The complete catalog of resilience design patterns provides designers with reusable design elements. We also define a framework that enhances a designer's understanding of the important constraints and opportunities for the design patterns to be implemented and deployed at various layers of the system stack. This design framework may be used to establish mechanisms and interfaces to coordinate flexible fault management across hardware and software components. The framework also supports optimization of the cost-benefit trade-offs among performance, resilience, and power consumption. The overall goal of this work is to enable a systematic methodology for the design and evaluation of resilience technologies in extreme-scale HPC systems that keep scientific applications running to a correct solution in a timely and cost-efficient manner in spite of frequent faults, errors, and failures of various types.« less

Comparison of the hedonic general Labeled Magnitude Scale with the hedonic 9-point scale.

PubMed

Kalva, Jaclyn J; Sims, Charles A; Puentes, Lorenzo A; Snyder, Derek J; Bartoshuk, Linda M

2014-02-01

The hedonic 9-point scale was designed to compare palatability among different food items; however, it has also been used occasionally to compare individuals and groups. Such comparisons can be invalid because scale labels (for example, "like extremely") can denote systematically different hedonic intensities across some groups. Addressing this problem, the hedonic general Labeled Magnitude Scale (gLMS) frames affective experience in terms of the strongest imaginable liking/disliking of any kind, which can yield valid group comparisons of food palatability provided extreme hedonic experiences are unrelated to food. For each scale, 200 panelists rated affect for remembered food products (including favorite and least favorite foods) and sampled foods; they also sampled taste stimuli (quinine, sucrose, NaCl, citric acid) and rated their intensity. Finally, subjects identified experiences representing the endpoints of the hedonic gLMS. Both scales were similar in their ability to detect within-subject hedonic differences across a range of food experiences, but group comparisons favored the hedonic gLMS. With the 9-point scale, extreme labels were strongly associated with extremes in food affect. In contrast, gLMS data showed that scale extremes referenced nonfood experiences. Perceived taste intensity significantly influenced differences in food liking/disliking (for example, those experiencing the most intense tastes, called supertasters, showed more extreme liking and disliking for their favorite and least favorite foods). Scales like the hedonic gLMS are suitable for across-group comparisons of food palatability. © 2014 Institute of Food Technologists®

Virtual Reality for Pain Management in Cardiac Surgery

PubMed Central

Mosso-Vázquez, José Luis; Gao, Kenneth; Wiederhold, Brenda K.

2014-01-01

Abstract Surgical anxiety creates psychological and physiological stress, causes complications in surgical procedures, and prolongs recovery. Relaxation of patients in postoperative intensive care units can moderate patient vital signs and reduce discomfort. This experiment explores the use of virtual reality (VR) cybertherapy to reduce postoperative distress in patients that have recently undergone cardiac surgery. Sixty-seven patients were monitored at IMSS La Raza National Medical Center within 24 hours of cardiac surgery. Patients navigated through a 30 minute VR simulation designed for pain management. Results were analyzed through comparison of pre- and postoperative vital signs and Likert scale survey data. A connection was found in several physiological factors with subjective responses from the Likert scale survey. Heavy positive correlation existed between breathing rate and Likert ratings, and a moderate correlation was found between mean arterial pressure and Likert ratings and heart rate and Likert ratings, all of which indicated lower pain and stress within patients. Further study of these factors resulted in the categorization of patients based upon their vital signs and subjective response, providing a context for the effectiveness of the therapy to specific groups of patients. PMID:24892200

A UVM simulation environment for the study, optimization and verification of HL-LHC digital pixel readout chips

NASA Astrophysics Data System (ADS)

Marconi, S.; Conti, E.; Christiansen, J.; Placidi, P.

2018-05-01

The operating conditions of the High Luminosity upgrade of the Large Hadron Collider are very demanding for the design of next generation hybrid pixel readout chips in terms of particle rate, radiation level and data bandwidth. To this purpose, the RD53 Collaboration has developed for the ATLAS and CMS experiments a dedicated simulation and verification environment using industry-consolidated tools and methodologies, such as SystemVerilog and the Universal Verification Methodology (UVM). This paper presents how the so-called VEPIX53 environment has first guided the design of digital architectures, optimized for processing and buffering very high particle rates, and secondly how it has been reused for the functional verification of the first large scale demonstrator chip designed by the collaboration, which has recently been submitted.

Flow Components in a NaK Test Loop Designed to Simulate Conditions in a Nuclear Surface Power Reactor

NASA Astrophysics Data System (ADS)

Polzin, Kurt A.; Godfroy, Thomas J.

2008-01-01

A test loop using NaK as the working fluid is presently in use to study material compatibility effects on various components that comprise a possible nuclear reactor design for use on the lunar surface. A DC electromagnetic (EM) pump has been designed and implemented as a means of actively controlling the NaK flow rate through the system and an EM flow sensor is employed to monitor the developed flow rate. These components allow for the matching of the flow rate conditions in test loops with those that would be found in a full-scale surface-power reactor. The design and operating characteristics of the EM pump and flow sensor are presented. In the EM pump, current is applied to a set of electrodes to produce a Lorentz body force in the fluid. A measurement of the induced voltage (back-EMF) in the flow sensor provides the means of monitoring flow rate. Both components are compact, employing high magnetic field strength neodymium magnets thermally coupled to a water-cooled housing. A vacuum gap limits the heat transferred from the high temperature NaK tube to the magnets and a magnetically-permeable material completes the magnetic circuit. The pump is designed to produce a pressure rise of 34.5 kPa, and the flow sensor's predicted output is roughly 20 mV at the loop's nominal flow rate of 0.114 m3/hr.

Flow Components in a NaK Test Loop Designed to Simulate Conditions in a Nuclear Surface Power Reactor

NASA Technical Reports Server (NTRS)

Polzin, Kurt A.; Godfroy, Thomas J.

2008-01-01

A test loop using NaK as the working fluid is presently in use to study material compatibility effects on various components that comprise a possible nuclear reactor design for use on the lunar surface. A DC electromagnetic (EM) pump has been designed and implemented as a means of actively controlling the NaK flow rate through the system and an EM flow sensor is employed to monitor the developed flow rate. These components allow for the matching of the flow rate conditions in test loops with those that would be found in a full-scale surface-power reactor. The design and operating characteristics of the EM pump and flow sensor are presented. In the EM pump, current is applied to a set of electrodes to produce a Lorentz body force in the fluid. A measurement of the induced voltage (back-EMF) in the flow sensor provides the means of monitoring flow rate. Both components are compact, employing high magnetic field strength neodymium magnets thermally coupled to a water-cooled housing. A vacuum gap limits the heat transferred from the high temperature NaK tube to the magnets and a magnetically-permeable material completes the magnetic circuit. The pump is designed to produce a pressure rise of 5 psi, and the flow sensor's predicted output is roughly 20 mV at the loop's nominal flow rate of 0.5 GPM.

Resilience Design Patterns - A Structured Approach to Resilience at Extreme Scale (version 1.0)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hukerikar, Saurabh; Engelmann, Christian

Reliability is a serious concern for future extreme-scale high-performance computing (HPC) systems. Projections based on the current generation of HPC systems and technology roadmaps suggest that very high fault rates in future systems. The errors resulting from these faults will propagate and generate various kinds of failures, which may result in outcomes ranging from result corruptions to catastrophic application crashes. Practical limits on power consumption in HPC systems will require future systems to embrace innovative architectures, increasing the levels of hardware and software complexities. The resilience challenge for extreme-scale HPC systems requires management of various hardware and software technologies thatmore » are capable of handling a broad set of fault models at accelerated fault rates. These techniques must seek to improve resilience at reasonable overheads to power consumption and performance. While the HPC community has developed various solutions, application-level as well as system-based solutions, the solution space of HPC resilience techniques remains fragmented. There are no formal methods and metrics to investigate and evaluate resilience holistically in HPC systems that consider impact scope, handling coverage, and performance & power eciency across the system stack. Additionally, few of the current approaches are portable to newer architectures and software ecosystems, which are expected to be deployed on future systems. In this document, we develop a structured approach to the management of HPC resilience based on the concept of resilience-based design patterns. A design pattern is a general repeatable solution to a commonly occurring problem. We identify the commonly occurring problems and solutions used to deal with faults, errors and failures in HPC systems. The catalog of resilience design patterns provides designers with reusable design elements. We define a design framework that enhances our understanding of the important constraints and opportunities for solutions deployed at various layers of the system stack. The framework may be used to establish mechanisms and interfaces to coordinate flexible fault management across hardware and software components. The framework also enables optimization of the cost-benefit trade-os among performance, resilience, and power consumption. The overall goal of this work is to enable a systematic methodology for the design and evaluation of resilience technologies in extreme-scale HPC systems that keep scientific applications running to a correct solution in a timely and cost-ecient manner in spite of frequent faults, errors, and failures of various types.« less

Cost Scaling of a Real-World Exhaust Waste Heat Recovery Thermoelectric Generator: A Deeper Dive

NASA Astrophysics Data System (ADS)

Hendricks, Terry J.; Yee, Shannon; LeBlanc, Saniya

2016-03-01

Cost is equally important to power density or efficiency for the adoption of waste heat recovery thermoelectric generators (TEG) in many transportation and industrial energy recovery applications. In many cases, the system design that minimizes cost (e.g., the /W value) can be very different than the design that maximizes the system's efficiency or power density, and it is important to understand the relationship between those designs to optimize TEG performance-cost compromises. Expanding on recent cost analysis work and using more detailed system modeling, an enhanced cost scaling analysis of a waste heat recovery TEG with more detailed, coupled treatment of the heat exchangers has been performed. In this analysis, the effect of the heat lost to the environment and updated relationships between the hot-side and cold-side conductances that maximize power output are considered. This coupled thermal and thermoelectric (TE) treatment of the exhaust waste heat recovery TEG yields modified cost scaling and design optimization equations, which are now strongly dependent on the heat leakage fraction, exhaust mass flow rate, and heat exchanger effectiveness. This work shows that heat exchanger costs most often dominate the overall TE system costs, that it is extremely difficult to escape this regime, and in order to achieve TE system costs of 1/W it is necessary to achieve heat exchanger costs of 1/(W/K). Minimum TE system costs per watt generally coincide with maximum power points, but preferred TE design regimes are identified where there is little cost penalty for moving into regions of higher efficiency and slightly lower power outputs. These regimes are closely tied to previously identified low cost design regimes. This work shows that the optimum fill factor F opt minimizing system costs decreases as heat losses increase, and increases as exhaust mass flow rate and heat exchanger effectiveness increase. These findings have profound implications on the design and operation of various TE waste heat recovery systems. This work highlights the importance of heat exchanger costs on the overall TEG system costs, quantifies the possible TEG performance-cost domain space based on heat exchanger effects, and provides a focus for future system research and development efforts.

Objective structured assessment of nontechnical skills: Reliability of a global rating scale for the in-training assessment in the operating room.

PubMed

Dedy, Nicolas J; Szasz, Peter; Louridas, Marisa; Bonrath, Esther M; Husslein, Heinrich; Grantcharov, Teodor P

2015-06-01

Nontechnical skills are critical for patient safety in the operating room (OR). As a result, regulatory bodies for accreditation and certification have mandated the integration of these competencies into postgraduate education. A generally accepted approach to the in-training assessment of nontechnical skills, however, is lacking. The goal of the present study was to develop an evidence-based and reliable tool for the in-training assessment of residents' nontechnical performance in the OR. The Objective Structured Assessment of Nontechnical Skills tool was designed as a 5-point global rating scale with descriptive anchors for each item, based on existing evidence-based frameworks of nontechnical skills, as well as resident training requirements. The tool was piloted on scripted videos and refined in an iterative process. The final version was used to rate residents' performance in recorded OR crisis simulations and during live observations in the OR. A total of 37 simulations and 10 live procedures were rated. Interrater agreement was good for total mean scores, both in simulation and in the real OR, with intraclass correlation coefficients >0.90 in all settings for average and single measures. Internal consistency of the scale was high (Cronbach's alpha = 0.80). The Objective Structured Assessment of Nontechnical Skills global rating scale was developed as an evidence-based tool for the in-training assessment of residents' nontechnical performance in the OR. Unique descriptive anchors allow for a criterion-referenced assessment of performance. Good reliability was demonstrated in different settings, supporting applications in research and education. Copyright © 2015 Elsevier Inc. All rights reserved.

Thermal oxidation of nuclear graphite: A large scale waste treatment option.

PubMed

Theodosiou, Alex; Jones, Abbie N; Marsden, Barry J

2017-01-01

This study has investigated the laboratory scale thermal oxidation of nuclear graphite, as a proof-of-concept for the treatment and decommissioning of reactor cores on a larger industrial scale. If showed to be effective, this technology could have promising international significance with a considerable impact on the nuclear waste management problem currently facing many countries worldwide. The use of thermal treatment of such graphite waste is seen as advantageous since it will decouple the need for an operational Geological Disposal Facility (GDF). Particulate samples of Magnox Reactor Pile Grade-A (PGA) graphite, were oxidised in both air and 60% O2, over the temperature range 400-1200°C. Oxidation rates were found to increase with temperature, with a particular rise between 700-800°C, suggesting a change in oxidation mechanism. A second increase in oxidation rate was observed between 1000-1200°C and was found to correspond to a large increase in the CO/CO2 ratio, as confirmed through gas analysis. Increasing the oxidant flow rate gave a linear increase in oxidation rate, up to a certain point, and maximum rates of 23.3 and 69.6 mg / min for air and 60% O2 respectively were achieved at a flow of 250 ml / min and temperature of 1000°C. These promising results show that large-scale thermal treatment could be a potential option for the decommissioning of graphite cores, although the design of the plant would need careful consideration in order to achieve optimum efficiency and throughput.

Thermal oxidation of nuclear graphite: A large scale waste treatment option

PubMed Central

Jones, Abbie N.; Marsden, Barry J.

2017-01-01

This study has investigated the laboratory scale thermal oxidation of nuclear graphite, as a proof-of-concept for the treatment and decommissioning of reactor cores on a larger industrial scale. If showed to be effective, this technology could have promising international significance with a considerable impact on the nuclear waste management problem currently facing many countries worldwide. The use of thermal treatment of such graphite waste is seen as advantageous since it will decouple the need for an operational Geological Disposal Facility (GDF). Particulate samples of Magnox Reactor Pile Grade-A (PGA) graphite, were oxidised in both air and 60% O2, over the temperature range 400–1200°C. Oxidation rates were found to increase with temperature, with a particular rise between 700–800°C, suggesting a change in oxidation mechanism. A second increase in oxidation rate was observed between 1000–1200°C and was found to correspond to a large increase in the CO/CO2 ratio, as confirmed through gas analysis. Increasing the oxidant flow rate gave a linear increase in oxidation rate, up to a certain point, and maximum rates of 23.3 and 69.6 mg / min for air and 60% O2 respectively were achieved at a flow of 250 ml / min and temperature of 1000°C. These promising results show that large-scale thermal treatment could be a potential option for the decommissioning of graphite cores, although the design of the plant would need careful consideration in order to achieve optimum efficiency and throughput. PMID:28793326

Computer-based attention training in the schools for children with attention deficit/hyperactivity disorder: a preliminary trial.

PubMed

Steiner, Naomi J; Sheldrick, Radley Christopher; Gotthelf, David; Perrin, Ellen C

2011-07-01

Objective. This study examined the efficacy of 2 computer-based training systems to teach children with attention deficit/hyperactivity disorder (ADHD) to attend more effectively. Design/methods. A total of 41 children with ADHD from 2 middle schools were randomly assigned to receive 2 sessions a week at school of either neurofeedback (NF) or attention training through a standard computer format (SCF), either immediately or after a 6-month wait (waitlist control group). Parents, children, and teachers completed questionnaires pre- and postintervention. Results. Primary parents in the NF condition reported significant (P < .05) change on Conners's Rating Scales-Revised (CRS-R) and Behavior Assessment Scales for Children (BASC) subscales; and in the SCF condition, they reported significant (P < .05) change on the CRS-R Inattention scale and ADHD index, the BASC Attention Problems Scale, and on the Behavioral Rating Inventory of Executive Functioning (BRIEF). Conclusion. This randomized control trial provides preliminary evidence of the effectiveness of computer-based interventions for ADHD and supports the feasibility of offering them in a school setting.

Teaching Demands and Adaptive Curriculum Management.

ERIC Educational Resources Information Center

Flinders, David

A qualitative case study was designed to explore the work experience of six high school English teachers. Teachers were observed over a five month period. No formal, systematic rating scale or observation instruments were used; the observer relied upon his experience as a high school teacher and on specialized training in curriculum theory and…

101 Criteria for Appraising Interactive Video. A Futuremedia Guide.

ERIC Educational Resources Information Center

Copeland, Peter

The criteria in this guide for evaluating interactive video instructional programs are based on principles of learning and motivation, and emphasize the design, production, presentation, and usage of interactive video programs. Presented in the format of a rating scale, the criteria are grouped into nine broad categories: (1) information about the…

The Roles of Sex, Gender, and Coping in Adolescent Depression

ERIC Educational Resources Information Center

Li, Cindy Ellen; DiGiuseppe, Raymond; Froh, Jeffrey

2006-01-01

This study investigated the roles of coping and masculinity in higher rates of depressive symptoms among adolescent girls, as compared to boys. A model was designed and tested through path analysis, which involved the variables of sex, gender, problem-focused coping, rumination, and distraction. The Reynolds Adolescent Depression Scale and the Bem…

On the Hedges Correction for a "t"-Test

ERIC Educational Resources Information Center

VanHoudnos, Nathan M.; Greenhouse, Joel B.

2016-01-01

When cluster randomized experiments are analyzed as if units were independent, test statistics for treatment effects can be anticonservative. Hedges proposed a correction for such tests by scaling them to control their Type I error rate. This article generalizes the Hedges correction from a posttest-only experimental design to more common designs…

Enhancing Treatment Team Process through Mindfulness-Based Mentoring in an Inpatient Psychiatric Hospital

ERIC Educational Resources Information Center

Singh, Nirbhay N.; Singh, Subhashni D.; Sabaawi, Mohamed; Myers, Rachel E.; Wahler, Robert G.

2006-01-01

The authors investigated changes in treatment team functioning in an adult inpatient psychiatric hospital after the implementation of a mindfulness-based mentoring intervention. Using a multiple baseline across treatment teams design, the authors assessed levels of functioning of three treatment teams using a 50-item rating scale and then…

Conjoint analysis of nature tourism values in Bahia, Brazil

Treesearch

Thomas Holmes; Chris Zinkhan; Keith Alger; D. Evan Mercer

1996-01-01

This paper uses conjoint analysis to estimate the value of nature tourism attributes in a threatened forest ecosystem in northeastern Brazil. Computerized interviews were conducted using a paired comparison design. An ordinal interpretation of the rating scale was used and marginal utilities were estimated using ordered probit. The empirical results showed that the...

Development of a Questionnaire Assessing School Physical Activity Environment

ERIC Educational Resources Information Center

Robertson-Wilson, Jennifer; Levesque, Lucie; Holden, Ronald R.

2007-01-01

This study was designed to develop the Questionnaire Assessing School Physical Activity Environment (Q--SPACE) based on student perceptions. Twenty-eight items rated on 4-point Likert scales were administered to 244 middle school students in 9 schools. Exploratory factor analysis was used to evaluate the underlying structure of the items and 2…

A Cross-Cultural Study of Self-Report Depressive Symptoms among College Students.

ERIC Educational Resources Information Center

Crittenden, Kathleen S.; And Others

1992-01-01

A study of self-report depressive symptoms measured by the Zung Self-Rating Depression Scale was conducted in Korea, the Philippines, Taiwan, and the United States with 953 college students. There are marked differences among countries in symptoms reported. Research designs and measurement strategies for cross-cultural research are discussed. (SLD)

Confirmatory Factor Analysis on the Professional Suitability Scale for Social Work Practice

ERIC Educational Resources Information Center

Tam, Dora M. Y.; Twigg, Robert C.; Boey, Kam-Wing; Kwok, Siu-Ming

2013-01-01

Objective: This article presents a validation study to examine the factor structure of an instrument designed to measure professional suitability for social work practice. Method: Data were collected from registered social workers in a provincial mailed survey. The response rate was 23.2%. After eliminating five cases with multivariate outliers,…

Attention Deficit Disorder and Hyperactivity. Second Edition.

ERIC Educational Resources Information Center

Friedman, Ronald J.; Doyal, Guy T.

This book is designed for parents and teachers of children with Attention Deficit Disorder (ADD) and hyperactivity. Chapter 1 describes the symptoms, diagnosis, and causes of ADD, its effect on parents and families, inborn temperament characteristics of children with ADD, and tests and rating scales used to diagnose and treat the disorder. The…

The Home Situations Questionnaire-PDD Version: Factor Structure and Psychometric Properties

ERIC Educational Resources Information Center

Chowdhury, M.; Aman, M. G.; Scahill, L.; Swiezy, N.; Arnold, L. E.; Lecavalier, L.; Johnson, C.; Handen, B.; Stigler, K.; Bearss, K.; Sukhodolsky, D.; McDougle, C. J.

2010-01-01

Background: The Home Situations Questionnaire (HSQ) is a caregiver-rated scale designed to assess behavioural non-compliance in everyday settings that has been used in several studies in typically developing children. Currently there is no accepted measure of behavioural non-compliance in children with pervasive developmental disorders (PDDs).…

Effects of process parameters on solid self-microemulsifying particles in a laboratory scale fluid bed.

PubMed

Mukherjee, Tusharmouli; Plakogiannis, Fotios M

2012-01-01

The purpose of this study was to select the critical process parameters of the fluid bed processes impacting the quality attribute of a solid self-microemulsifying (SME) system of albendazole (ABZ). A fractional factorial design (2(4-1)) with four parameters (spray rate, inlet air temperature, inlet air flow, and atomization air pressure) was created by MINITAB software. Batches were manufactured in a laboratory top-spray fluid bed at 625-g scale. Loss on drying (LOD) samples were taken throughout each batch to build the entire moisture profiles. All dried granulation were sieved using mesh 20 and analyzed for particle size distribution (PSD), morphology, density, and flow. It was found that as spray rate increased, sauter-mean diameter (D(s)) also increased. The effect of inlet air temperature on the peak moisture which is directly related to the mean particle size was found to be significant. There were two-way interactions between studied process parameters. The main effects of inlet air flow rate and atomization air pressure could not be found as the data were inconclusive. The partial least square (PLS) regression model was found significant (P < 0.01) and predictive for optimization. This study established a design space for the parameters for solid SME manufacturing process.

Effect of Freeze Dryer Design on Heat Transfer Variability Investigated Using a 3D Mathematical Model.

PubMed

Scutellà, Bernadette; Bourlès, Erwan; Plana-Fattori, Artemio; Fonseca, Fernanda; Flick, Denis; Trelea, Ioan-Cristian; Passot, Stephanie

2018-04-14

During the freeze-drying process, vials located at the border of the shelf usually present higher heat flow rates that result in higher product temperatures than vials in the center. This phenomenon, referred to as edge vial effect, can lead to product quality variability within the same batch of vials and between batches at different scales. Our objective was to investigate the effect of various freeze dryer design features on heat transfer variability. A 3D mathematical model previously developed in COMSOL Multiphysics and experimentally validated was used to simulate the heat transfer of a set of vials located at the edge and in the center of the shelf. The design features considered included the vials loading configurations, the thermal characteristics, and some relevant dimensions of the drying chamber geometry. The presence of the rail in the loading configuration and the value of the shelf emissivity strongly impacted the heat flow rates received by the vials. Conversely, the heat transfer was not significantly influenced by modifications of the thermal conductivity of the rail, the emissivity of the walls, or the geometry of the drying chamber. The model developed turned out to be a powerful tool for cycle development and scale-up. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Design concept of a cryogenic distillation column cascade for a ITER scale fusion reactor

NASA Astrophysics Data System (ADS)

Yamanishi, Toshihiko; Enoeda, Mikio; Okuno, Kenji

1994-07-01

A column cascade has been proposed for the fuel cycle of a ITER scale fusion reactor. The proposed cascade consists of three columns and has significant features: either top or bottom product is prior to the other for each column; it is avoided to withdraw side streams as products or feeds of down stream columns; and there is no recycle steam between the columns. In addition, the product purity of the cascade can be maintained against the changes of flow rates and compositions of feed streams just by adjusting the top and bottom flow rates. The control system has been designed for each column in the cascade. A key component in the prior product stream was selected, and the analysis method of this key component was proposed. The designed control system never brings instability as long as the concentration of the key component is measured with negligible time lag. The time lag for the measurement considerably affects the stability of the control system. A significant conclusion by the simulation in this work is that permissible time for the measurement is about 0.5 hour to obtain stable control. Hence, the analysis system using the gas chromatography is valid for control of the columns.

Effectiveness and feasibility of Socratic feedback to increase awareness of deficits in patients with acquired brain injury: Four single-case experimental design (SCED) studies.

PubMed

Schrijnemaekers, Anne-Claire M C; Winkens, Ieke; Rasquin, Sascha M C; Verhaeg, Annette; Ponds, Rudolf W H M; van Heugten, Caroline M

2018-06-29

To investigate the effectiveness and feasibility of a Socratic feedback programme to improve awareness of deficits in patients with acquired brain injury (ABI). Rehabilitation centre. Four patients with ABI with awareness problems. A series of single-case experimental design studies with random intervention starting points (A-B + maintenance design). Rate of trainer-feedback and self-control behaviour on everyday tasks, patient competency rating scale (PCRS), self-regulating skills interview (SRSI), hospital anxiety and depression scale. All patients needed less trainer feedback, the change was significant in 3 out of 4. One patient increased in overt self-corrective behaviour. SRSI performance increased in all patients (medium to strong effect size), and PCRS performance increased in two patients (medium and strong effect size). Mood and anxiety levels were elevated in one patient at the beginning of the training and decreased to normal levels at the end of the training. The feasibility of the programme was scored 9 out of 10. The Socratic feedback method is a promising intervention for improving awareness of deficits in patients with ABI. Controlled studies with larger populations are needed to draw more solid conclusions about the effect of this method.

Small scale green infrastructure design to meet different urban hydrological criteria.

PubMed

Jia, Z; Tang, S; Luo, W; Li, S; Zhou, M

2016-04-15

As small scale green infrastructures, rain gardens have been widely advocated for urban stormwater management in the contemporary low impact development (LID) era. This paper presents a simple method that consists of hydrological models and the matching plots of nomographs to provide an informative and practical tool for rain garden sizing and hydrological evaluation. The proposed method considers design storms, infiltration rates and the runoff contribution area ratio of the rain garden, allowing users to size a rain garden for a specific site with hydrological reference and predict overflow of the rain garden under different storms. The nomographs provide a visual presentation on the sensitivity of different design parameters. Subsequent application of the proposed method to a case study conducted in a sub-humid region in China showed that, the method accurately predicted the design storms for the existing rain garden, the predicted overflows under large storm events were within 13-50% of the measured volumes. The results suggest that the nomographs approach is a practical tool for quick selection or assessment of design options that incorporate key hydrological parameters of rain gardens or other infiltration type green infrastructure. The graphic approach as displayed by the nomographs allow urban planners to demonstrate the hydrological effect of small scale green infrastructure and gain more support for promoting low impact development. Copyright © 2016 Elsevier Ltd. All rights reserved.

Developing the RAL front end test stand source to deliver a 60 mA, 50 Hz, 2 ms H- beam

NASA Astrophysics Data System (ADS)

Faircloth, Dan; Lawrie, Scott; Letchford, Alan; Gabor, Christoph; Perkins, Mike; Whitehead, Mark; Wood, Trevor; Tarvainen, Olli; Komppula, Jani; Kalvas, Taneli; Dudnikov, Vadim; Pereira, Hugo; Izaola, Zunbeltz; Simkin, John

2013-02-01

All the Front End Test Stand (FETS) beam requirements have been achieved, but not simultaneously [1]. At 50 Hz repetition rates beam current droop becomes unacceptable for pulse lengths longer than 1 ms. This is fundamental limitation of the present source design. Previous researchers [2] have demonstrated that using a physically larger Penning surface plasma source should overcome these limitations. The scaled source development strategy is outlined in this paper. A study of time-varying plasma behavior has been performed using a V-UV spectrometer. Initial experiments to test scaled plasma volumes are outlined. A dedicated plasma and extraction test stand (VESPA-Vessel for Extraction and Source Plasma Analysis) is being developed to allow new source and extraction designs to be appraised. The experimental work is backed up by modeling and simulations. A detailed ANSYS thermal model has been developed. IBSimu is being used to design extraction and beam transport. A novel 3D plasma modeling code using beamlets is being developed by Cobham Vector Fields using SCALA OPERA, early source modeling results are very promising. Hardware on FETS is also being developed in preparation to run the scaled source. A new 2 ms, 50 Hz, 25 kV pulsed extraction voltage power supply has been constructed and a new discharge power supply is being designed. The design of the post acceleration electrode assembly has been improved.

A first-level evaluation of a family intervention for adolescent social, emotional and behavioural difficulties in Child and Adolescent Mental Health Services.

PubMed

Wynne, Ciara; Doyle, Caoimhe; Kenny, Rachel; Brosnan, Eileen; Sharry, John

2016-01-01

This study is a first-level evaluation of a family intervention targeted at adolescents with social, emotional and behavioural difficulties (SEBD) attending Child and Adolescent Mental Health Services (CAMHS) in Ireland. It is a combined implementation of the Working Things Out adolescent programme and the Parents Plus Adolescent Programme (WTOPPAP). A total of 93 adolescents aged 11-17 years (M = 14.64, SD = 1.31; 39% male) and their parents took part in the study. The study used a quasi-experimental One-Group Pretest-Posttest design to assess change from pre- to post-intervention using the Strengths and Difficulties Questionnaire, the McMaster General Functioning Scale, Goal Attainment, Parent Stress Scale and the Kansas Parenting Satisfaction Scale. Both parent- and adolescent-rated goal attainment and general family functioning improved from pre- to post-intervention. Parents also rated their satisfaction with parenting as having significantly improved. Adolescent-rated emotional difficulties significantly improved for the overall sample and parent-rated child total difficulties for female adolescents significantly improved from pre-test to post-test. Parents of female adolescents also reported a significant drop in parental stress. These findings indicate that the WTOPPAP may be an effective intervention for adolescents with SEBD, particularly females, and their parents. Further implications are discussed.

Practising what we preach: using cognitive load theory for workshop design and evaluation.

PubMed

Naismith, Laura M; Haji, Faizal A; Sibbald, Matthew; Cheung, Jeffrey J H; Tavares, Walter; Cavalcanti, Rodrigo B

2015-12-01

Theory-based instructional design is a top priority in medical education. The goal of this Show and Tell article is to present our theory-driven approach to the design of instruction for clinical educators. We adopted cognitive load theory as a framework to design and evaluate a series of professional development workshops that were delivered at local, national and international academic conferences in 2014. We used two rating scales to measure participants' cognitive load. Participants also provided narrative comments as to how the workshops could be improved. Cognitive load ratings from 59 participants suggested that the workshop design optimized learning by managing complexity for different levels of learners (intrinsic load), stimulating cognitive processing for long-term memory storage (germane load), and minimizing irrelevant distracters (extraneous load). Narrative comments could also be classified as representing intrinsic, extraneous, or germane load, which provided specific directions for ongoing quality improvement. These results demonstrate that a cognitive load theory approach to workshop design and evaluation is feasible and useful in the context of medical education.

Novel duplex vapor: Electrochemical method for silicon solar cells. [chemical reactor for a silicon sodium reaction system

NASA Technical Reports Server (NTRS)

Nanis, L.; Sanjurjo, A.; Sancier, K.

1979-01-01

The scaled up chemical reactor for a SiF4-Na reaction system is examined for increased reaction rate and production rate. The reaction system which now produces 5 kg batches of mixed Si and NaF is evaluated. The reactor design is described along with an analysis of the increased capacity of the Na chip feeder. The reactor procedure is discussed and Si coalescence in the reaction products is diagnosed.

Phase change paint tests on Rockwell orbiter/tank and orbiter alone configurations (OH3A/OH3B)

NASA Technical Reports Server (NTRS)

Quan, M.; Craig, C.

1974-01-01

Wind tunnel tests were conducted on scale models of the space shuttle orbiter and external tank. The tests were designed to determine the basic heating rate and interference effects on the orbiter-tank configuration and to analyze the effectiveness of the thermal protective system on the reentry vehicle. The phase change paint techniques were used to determine areodynamic heating rates. Oil flow and schlieren photographs were used for flow visualization.

The use of the general image quality equation in the design and evaluation of imaging systems

NASA Astrophysics Data System (ADS)

Cota, Steve A.; Florio, Christopher J.; Duvall, David J.; Leon, Michael A.

2009-08-01

The design of any modern imaging system is the end result of many trade studies, each seeking to optimize image quality within real world constraints such as cost, schedule and overall risk. The National Imagery Interpretability Rating Scale (NIIRS) is a useful measure of image quality, because, by characterizing the overall interpretability of an image, it combines into one metric those contributors to image quality to which a human interpreter is most sensitive. The main drawback to using a NIIRS rating as a measure of image quality in engineering trade studies is the fact that it is tied to the human observer and cannot be predicted from physical principles and engineering parameters alone. The General Image Quality Equation (GIQE) of Leachtenauer et al. 1997 [Appl. Opt. 36, 8322-8328 (1997)] is a regression of actual image analyst NIIRS ratings vs. readily calculable engineering metrics, and provides a mechanism for using the expected NIIRS rating of an imaging system in the design and evaluation process. In this paper, we will discuss how we use the GIQE in conjunction with The Aerospace Corporation's Parameterized Image Chain Analysis & Simulation SOftware (PICASSO) to evaluate imager designs, taking a hypothetical high resolution commercial imaging system as an example.

Genome-scale biological models for industrial microbial systems.

PubMed

Xu, Nan; Ye, Chao; Liu, Liming

2018-04-01

The primary aims and challenges associated with microbial fermentation include achieving faster cell growth, higher productivity, and more robust production processes. Genome-scale biological models, predicting the formation of an interaction among genetic materials, enzymes, and metabolites, constitute a systematic and comprehensive platform to analyze and optimize the microbial growth and production of biological products. Genome-scale biological models can help optimize microbial growth-associated traits by simulating biomass formation, predicting growth rates, and identifying the requirements for cell growth. With regard to microbial product biosynthesis, genome-scale biological models can be used to design product biosynthetic pathways, accelerate production efficiency, and reduce metabolic side effects, leading to improved production performance. The present review discusses the development of microbial genome-scale biological models since their emergence and emphasizes their pertinent application in improving industrial microbial fermentation of biological products.

Factors affecting length of stay in forensic hospital setting: need for therapeutic security and course of admission.

PubMed

Davoren, Mary; Byrne, Orla; O'Connell, Paul; O'Neill, Helen; O'Reilly, Ken; Kennedy, Harry G

2015-11-23

Patients admitted to a secure forensic hospital are at risk of a long hospital stay. Forensic hospital beds are a scarce and expensive resource and ability to identify the factors predicting length of stay at time of admission would be beneficial. The DUNDRUM-1 triage security scale and DUNDRUM-2 triage urgency scale are designed to assess need for therapeutic security and urgency of that need while the HCR-20 predicts risk of violence. We hypothesized that items on the DUNDRUM-1 and DUNDRUM-2 scales, rated at the time of pre-admission assessment, would predict length of stay in a medium secure forensic hospital setting. This is a prospective study. All admissions to a medium secure forensic hospital setting were collated over a 54 month period (n = 279) and followed up for a total of 66 months. Each patient was rated using the DUNDRUM-1 triage security scale and DUNDRUM-2 triage urgency scale as part of a pre-admission assessment (n = 279) and HCR-20 within 2 weeks of admission (n = 187). Episodes of harm to self, harm to others and episodes of seclusion whilst an in-patient were collated. Date of discharge was noted for each individual. Diagnosis at the time of pre-admission assessment (adjustment disorder v other diagnosis), predicted legal status (sentenced v mental health order) and items on the DUNDRUM-1 triage security scale and the DUNDRUM-2 triage urgency scale, also rated at the time of pre-admission assessment, predicted length of stay in the forensic hospital setting. Need for seclusion following admission also predicted length of stay. These findings may form the basis for a structured professional judgment instrument, rated prior to or at time of admission, to assist in estimating length of stay for forensic patients. Such a tool would be useful to clinicians, service planners and commissioners given the high cost of secure psychiatric care.

Effects of geometry and composition of soft polymer films embedded with nanoparticles on rates for optothermal heat dissipation.

PubMed

Roper, D Keith; Berry, Keith R; Dunklin, Jeremy R; Chambers, Caitlyn; Bejugam, Vinith; Forcherio, Gregory T; Lanier, Megan

2018-06-12

Embedding soft matter with nanoparticles (NPs) can provide electromagnetic tunability at sub-micron scales for a growing number of applications in healthcare, sustainable energy, and chemical processing. However, the use of NP-embedded soft material in temperature-sensitive applications has been constrained by difficulties in validating the prediction of rates for energy dissipation from thermally insulating to conducting behavior. This work improved the embedment of monodisperse NPs to stably decrease the inter-NP spacings in polydimethylsiloxane (PDMS) to nano-scale distances. Lumped-parameter and finite element analyses were refined to apportion the effects of the structure and composition of the NP-embedded soft polymer on the rates for conductive, convective, and radiative heat dissipation. These advances allowed for the rational selection of PDMS size and NP composition to optimize measured rates of internal (conductive) and external (convective and radiative) heat dissipation. Stably reducing the distance between monodisperse NPs to nano-scale intervals increased the overall heat dissipation rate by up to 29%. Refined fabrication of NP-embedded polymer enabled the tunability of the dynamic thermal response (the ratio of internal to external dissipation rate) by a factor of 3.1 to achieve a value of 0.091, the largest reported to date. Heat dissipation rates simulated a priori were consistent with 130 μm resolution thermal images across 2- to 15-fold changes in the geometry and composition of NP-PDMS. The Nusselt number was observed to increase with the fourth root of the Rayleigh number across thermally insulative and conductive regimes, further validating the approach. These developments support the model-informed design of soft media embedded with nano-scale-spaced NPs to optimize the heat dissipation rates for evolving temperature-sensitive diagnostic and therapeutic modalities, as well as emerging uses in flexible bioelectronics, cell and tissue culture, and solar-thermal heating.

Developing an instrument for assessing fidelity of motivational care planning: The Aboriginal and Islander Mental health initiative adherence scale.

PubMed

Prowse, Phuong-Tu; Nagel, Tricia

2014-01-01

The aim of this study was to design and trial an Adherence Scale to measure fidelity of Motivational Care Planning (MCP) within a clinical trial. This culturally adapted therapy MCP uses a client centered holistic approach that emphasises family and culture to motivate healthy life style changes. The Motivational Care Planning-Adherence Scale (MCP-AS) was developed through consultation with Aboriginal and Islander Mental Health Initiative (AIMhi) Indigenous and non-Indigenous trainers, and review of MCP training resources. The resultant ten-item scale incorporates a 9-Point Likert Scale with a supporting protocol manual and uses objective, behaviourally anchored criteria for each scale point. A fidelity assessor piloted the tool through analysis of four audio-recordings of MCP (conducted by Indigenous researchers within a study in remote communities in Northern Australia). File audits of the remote therapy sessions were utilised as an additional source of information. A Gold Standard Motivational Care Planning training video was also assessed using the MCP-AS. The Motivational Care Planning-Adherence Scale contains items measuring both process and content of therapy sessions. This scale was used successfully to assess therapy through observation of audio or video-recorded sessions and review of clinical notes. Treatment fidelity measured by the MCP-AS within the pilot study indicated high fidelity ratings. Ratings were high across the three domains of rapport, motivation, and self-management with especially high ratings for positive feedback and engagement, review of stressors and goal setting. The Motivational Care Planning-Adherence Scale has the potential to provide a measure of quality of delivery of Motivation Care Planning. The pilot findings suggest that despite challenges within the remote Indigenous community setting, Indigenous therapists delivered therapy that was of high fidelity. While developed as a research tool, the scale has the potential to support fidelity of delivery of Motivation Care Planning in clinical, supervision and training settings. Larger studies are needed to establish inter-rater reliability and internal and external validity.

Extruder scale-up assessment in the process of extrusion-spheronization: comparison of radial and axial systems by a design of experiments approach.

PubMed

Désiré, Amélie; Paillard, Bruno; Bougaret, Joël; Baron, Michel; Couarraze, Guy

2013-02-01

Scaling-up the extrusion-spheronization process involves the separate scale-up of each of the five process steps: dry mixing, granulation, extrusion, spheronization, and drying. The aim of the study was to compare two screw extrusion systems regarding their suitability for scaling-up. Two drug substances of high- and low-solubility in water were retained at different concentrations as formulation variables. Different spheronization times were tested. The productivity of the process was followed up using the extrusion rate and yield. Pellets were characterized by their size and shape, and by their structural and mechanical properties. A response surface design of experiments was built to evaluate the influence of the different variables and their interactions on each response, and to select the type of extrusion which provides the best results in terms of product quality, the one which shows less influence on the product after scale-up ("scalability") and when the formula used changes ("robustness"), and the one which allows the possibility to adjust pellet properties with spheronization variables ("flexibility"). Axial system showed the best characteristics in terms of product quality at lab and industrial scales, the best robustness at industrial scale, and the best scalability, by comparison with radial system. Axial system thus appeared as the easiest scaled-up system. Compared to lab scale, the conclusions observed at industrial scale were the same in terms of product quality, but different for robustness and flexibility, which confirmed the importance to test the systems at industrial scale before acquiring the equipment.

Effects of a blended learning module on self-reported learning performances in baccalaureate nursing students.

PubMed

Hsu, Li-Ling; Hsieh, Suh-Ing

2011-11-01

This article is a report of a quasi-experimental study of the effects of blended modules on nursing students' learning of ethics course content. There is yet to be an empirically supported mix of strategies on which a working blended learning model can be built for nursing education. This was a two-group pretest and post-test quasi-experimental study in 2008 involving a total of 233 students. Two of the five clusters were designated the experimental group to experience a blended learning model, and the rest were designated the control group to be given classroom lectures only. The Case Analysis Attitude Scale, Case Analysis Self-Evaluation Scale, Blended Learning Satisfaction Scale, and Metacognition Scale were used in pretests and post-tests for the students to rate their own performance. In this study, the experimental group did not register significantly higher mean scores on the Case Analysis Attitude Scale at post-test and higher mean ranks on the Case Analysis Self-Evaluation Scale, the Blended Learning Satisfaction Scale, and the Metacognition Scale at post-test than the control group. Moreover, the experimental group registered significant progress in the mean ranks on the Case Analysis Self-Evaluation Scale and the Metacognition Scale from pretest to post-test. No between-subjects effects of four scales at post-test were found. Newly developed course modules, be it blended learning or a combination of traditional and innovative components, should be tested repeatedly for effectiveness and popularity for the purpose of facilitating the ultimate creation of a most effective course module for nursing education. © 2011 Blackwell Publishing Ltd.

Detection-dependent kinetics as a probe of folding landscape microstructure.

PubMed

Yang, Wei Yuan; Gruebele, Martin

2004-06-30

The folding landscapes of polypeptides and proteins exhibit a hierarchy of local minima. The causes range from proline isomerization all the way down to microstructure in the free energy caused by residual frustration inherent in even the best 20 amino acid design. The corresponding time scales range from hours to submicroseconds. The smallest microstructures are difficult to detect. We have measured the folding/unfolding kinetics of the engineered trpzip2 peptide at different tryptophan fluorescence wavelengths, each yielding a different rate. Wavelength-dependent folding kinetics on 0.1-2 mus time scales show that different microstructures with a range of solvent exposure and local dynamics are populated. We estimate a lower limit for the roughness of the free energy surface based on the range of rates observed.

Individualized Homeopathic Treatment and Fluoxetine for Moderate to Severe Depression in Peri- and Postmenopausal Women (HOMDEP-MENOP Study): A Randomized, Double-Dummy, Double-Blind, Placebo-Controlled Trial

PubMed Central

Macías-Cortés, Emma del Carmen; Llanes-González, Lidia; Aguilar-Faisal, Leopoldo; Asbun-Bojalil, Juan

2015-01-01

Background Perimenopausal period refers to the interval when women's menstrual cycles become irregular and is characterized by an increased risk of depression. Use of homeopathy to treat depression is widespread but there is a lack of clinical trials about its efficacy in depression in peri- and postmenopausal women. The aim of this study was to assess efficacy and safety of individualized homeopathic treatment versus placebo and fluoxetine versus placebo in peri- and postmenopausal women with moderate to severe depression. Methods/Design A randomized, placebo-controlled, double-blind, double-dummy, superiority, three-arm trial with a 6 week follow-up study was conducted. The study was performed in a public research hospital in Mexico City in the outpatient service of homeopathy. One hundred thirty-three peri- and postmenopausal women diagnosed with major depression according to DSM-IV (moderate to severe intensity) were included. The outcomes were: change in the mean total score among groups on the 17-item Hamilton Rating Scale for Depression, Beck Depression Inventory and Greene Scale, after 6 weeks of treatment, response and remission rates, and safety. Efficacy data were analyzed in the intention-to-treat population (ANOVA with Bonferroni post-hoc test). Results After a 6-week treatment, homeopathic group was more effective than placebo by 5 points in Hamilton Scale. Response rate was 54.5% and remission rate, 15.9%. There was a significant difference among groups in response rate definition only, but not in remission rate. Fluoxetine-placebo difference was 3.2 points. No differences were observed among groups in the Beck Depression Inventory. Homeopathic group was superior to placebo in Greene Climacteric Scale (8.6 points). Fluoxetine was not different from placebo in Greene Climacteric Scale. Conclusion Homeopathy and fluoxetine are effective and safe antidepressants for climacteric women. Homeopathy and fluoxetine were significantly different from placebo in response definition only. Homeopathy, but not fluoxetine, improves menopausal symptoms scored by Greene Climacteric Scale. Trial Registration ClinicalTrials.gov NCT01635218 Protocol Publication http://www.trialsjournal.com/content/14/1/105. PMID:25768800

An integrated assessment of location-dependent scaling for microalgae biofuel production facilities

DOE PAGES

Coleman, André M.; Abodeely, Jared M.; Skaggs, Richard L.; ...

2014-06-19

Successful development of a large-scale microalgae-based biofuels industry requires comprehensive analysis and understanding of the feedstock supply chain—from facility siting and design through processing and upgrading of the feedstock to a fuel product. The evolution from pilot-scale production facilities to energy-scale operations presents many multi-disciplinary challenges, including a sustainable supply of water and nutrients, operational and infrastructure logistics, and economic competitiveness with petroleum-based fuels. These challenges are partially addressed by applying the Integrated Assessment Framework (IAF) – an integrated multi-scale modeling, analysis, and data management suite – to address key issues in developing and operating an open-pond microalgae production facility.more » This is done by analyzing how variability and uncertainty over space and through time affect feedstock production rates, and determining the site-specific “optimum” facility scale to minimize capital and operational expenses. This approach explicitly and systematically assesses the interdependence of biofuel production potential, associated resource requirements, and production system design trade-offs. To provide a baseline analysis, the IAF was applied in this paper to a set of sites in the southeastern U.S. with the potential to cumulatively produce 5 billion gallons per year. Finally, the results indicate costs can be reduced by scaling downstream processing capabilities to fit site-specific growing conditions, available and economically viable resources, and specific microalgal strains.« less

The Cleft Aesthetic Rating Scale for 18-Year-Old Unilateral Cleft Lip and Palate Patients: A Tool for Nasolabial Aesthetics Assessment.

PubMed

Mulder, F J; Mosmuller, D G M; de Vet, H C W; Mouës, C M; Breugem, C C; van der Molen, A B Mink; Don Griot, J P W

2018-01-01

Objective To develop a reliable and easy-to-use method to assess the nasolabial appearance of 18-year-old patients with unilateral cleft lip and palate (CLP). Design Retrospective analysis of nasolabial aesthetics using a 5-point ordinal scale and newly developed photographic reference scale: the Cleft Aesthetic Rating Scale (CARS). Three cleft surgeons and 20 medical students scored the nasolabial appearance on standardized frontal photographs. Setting VU University Medical Center, Amsterdam. Patients Inclusion criteria: 18-year-old patients, unilateral cleft lip and palate, available photograph of the frontal view. history of facial trauma, congenital syndromes affecting facial appearance. Eighty photographs were available for scoring. Main Outcome Measures The interobserver and intraobserver reliability of the CARS for 18-year-old patients when used by cleft surgeons and medical students. Results The interobserver reliability for the nose and lip together was 0.64 for the cleft surgeons and 0.61 for the medical students. There was an intraobserver reliability of 0.75 and 0.78 from the surgeons and students, respectively, on the nose and lip together. No significant difference was found between the cleft surgeons and medical students in the way they scored the nose ( P = 0.22) and lip ( P = 0.72). Conclusions The Cleft Aesthetic Rating Scale for 18-year-old patients has a substantial overall estimated reliability when the average score is taken from three or more cleft surgeons or medical students assessing the nasolabial aesthetics of CLP patients.

Numerical Modeling of STARx for Ex Situ Soil Remediation

NASA Astrophysics Data System (ADS)

Gerhard, J.; Solinger, R. L.; Grant, G.; Scholes, G.

2016-12-01

Growing stockpiles of contaminated soils contaminated with petroleum hydrocarbons are an outstanding problem worldwide. Self-sustaining Treatment for Active Remediation (STAR) is an emerging technology based on smouldering combustion that has been successfully deployed for in situ remediation. STAR has also been developed for ex situ applications (STARx). This work used a two-dimensional numerical model to systematically explore the sensitivity of ex situ remedial performance to key design and operational parameters. First the model was calibrated and validated against pilot scale experiments, providing confidence that the rate and extent of treatment were correctly predicted. Simulations then investigated sensitivity of remedial performance to injected air flux, contaminant saturation, system configuration, heterogeneity of intrinsic permeability, heterogeneity of contaminant saturation, and system scale. Remedial performance was predicted to be most sensitive to the injected air flux, with higher air fluxes achieving higher treatment rates and remediating larger fractions of the initial contaminant mass. The uniformity of the advancing smouldering front was predicted to be highly dependent on effective permeability contrasts between treated and untreated sections of the contaminant pack. As a result, increased heterogeneity (of intrinsic permeability in particular) is predicted to lower remedial performance. Full-scale systems were predicted to achieve treatment rates an order of magnitude higher than the pilot scale for similar contaminant saturation and injected air flux. This work contributed to the large scale STARx treatment system that is being tested at a field site in Fall 2016.

Review of feedstock pretreatment strategies for improved anaerobic digestion: From lab-scale research to full-scale application.

PubMed

Carrere, Hélène; Antonopoulou, Georgia; Affes, Rim; Passos, Fabiana; Battimelli, Audrey; Lyberatos, Gerasimos; Ferrer, Ivet

2016-01-01

When properly designed, pretreatments may enhance the methane potential and/or anaerobic digestion rate, improving digester performance. This paper aims at providing some guidelines on the most appropriate pretreatments for the main feedstocks of biogas plants. Waste activated sludge was firstly investigated and implemented at full-scale, its thermal pretreatment with steam explosion being most recommended as it increases the methane potential and digestion rate, ensures sludge sanitation and the heat needed is produced on-site. Regarding fatty residues, saponification is preferred for enhancing their solubilisation and bioavailability. In the case of animal by-products, this pretreatment can be optimised to ensure sterilisation, solubilisation and to reduce inhibition linked to long chain fatty acids. With regards to lignocellulosic biomass, the first goal should be delignification, followed by hemicellulose and cellulose hydrolysis, alkali or biological (fungi) pretreatments being most promising. As far as microalgae are concerned, thermal pretreatment seems the most promising technique so far. Copyright © 2015 Elsevier Ltd. All rights reserved.

Hyperviscosity for unstructured ALE meshes

NASA Astrophysics Data System (ADS)

Cook, Andrew W.; Ulitsky, Mark S.; Miller, Douglas S.

2013-01-01

An artificial viscosity, originally designed for Eulerian schemes, is adapted for use in arbitrary Lagrangian-Eulerian simulations. Changes to the Eulerian model (dubbed 'hyperviscosity') are discussed, which enable it to work within a Lagrangian framework. New features include a velocity-weighted grid scale and a generalised filtering procedure, applicable to either structured or unstructured grids. The model employs an artificial shear viscosity for treating small-scale vorticity and an artificial bulk viscosity for shock capturing. The model is based on the Navier-Stokes form of the viscous stress tensor, including the diagonal rate-of-expansion tensor. A second-order version of the model is presented, in which Laplacian operators act on the velocity divergence and the grid-weighted strain-rate magnitude to ensure that the velocity field remains smooth at the grid scale. Unlike sound-speed-based artificial viscosities, the hyperviscosity model is compatible with the low Mach number limit. The new model outperforms a commonly used Lagrangian artificial viscosity on a variety of test problems.

Perception of speaker size and sex of vowel sounds

NASA Astrophysics Data System (ADS)

Smith, David R. R.; Patterson, Roy D.

2005-04-01

Glottal-pulse rate (GPR) and vocal-tract length (VTL) are both related to speaker size and sex-however, it is unclear how they interact to determine our perception of speaker size and sex. Experiments were designed to measure the relative contribution of GPR and VTL to judgements of speaker size and sex. Vowels were scaled to represent people with different GPRs and VTLs, including many well beyond the normal population values. In a single interval, two response rating paradigm, listeners judged the size (using a 7-point scale) and sex/age of the speaker (man, woman, boy, or girl) of these scaled vowels. Results from the size-rating experiments show that VTL has a much greater influence upon judgements of speaker size than GPR. Results from the sex-categorization experiments show that judgements of speaker sex are influenced about equally by GPR and VTL for vowels with normal GPR and VTL values. For abnormal combinations of GPR and VTL, where low GPRs are combined with short VTLs, VTL has more influence than GPR in sex judgements. [Work supported by the UK MRC (G9901257) and the German Volkswagen Foundation (VWF 1/79 783).

Food product design: emerging evidence for food policy.

PubMed

Al-Hamdani, Mohammed; Smith, Steven

2017-03-01

The research on the impact of specific brand elements such as food descriptors and package colors is underexplored. We tested whether a "light" color and a "low-calorie" descriptor on food packages gain favorable consumer perception ratings as compared with regular packages. Our online experiment recruited 406 adults in a 3 (product type: Chips versus Juice versus Yoghurt) × 2 (descriptor type: regular versus low-calorie) × 2 (color type: regular versus light) mixed design. Dependent variables were sensory (evaluations of the product's nutritional value and quality), product-based (evaluations of the product's physical appeal), and consumer-based (evaluations of the potential consumers of the product) scales. "Low-calorie" descriptors were found to increase sensory ratings as compared with regular descriptors and light-colored packages received higher product-based ratings as compared with their regular-colored counterparts. Food package color and descriptors present a promising venue for understanding preventative measures against obesity.[Formula: see text].

Flow in a centrifugal fan impeller at off-design conditions

NASA Astrophysics Data System (ADS)

Wright, T.; Tzou, K. T. S.; Madhavan, S.

1984-06-01

A fully three-dimensional finite element analysis of inviscid, incompressible blade channel flow is the basis of the present study of both predicted and measured surface velocity and pressure distributions in the internal flow channels of a centrifugal fan impeller, for volume flow rates of 80-125 percent the design flow rate. The experimental results made extensive use of blade and sidewall surface pressure taps installed in a scale model of an airfoil-bladed centrifugal fan impeller. The results obtained illustrate the ability of both flow analyses to predict the dominant features of the impeller flow field, including peak blade surface velocities and adverse gradients at flows far from the design point. Insight is also gained into the limiting channel diffusion values for typical centrifugal cascade performance, together with the influence of viscous effects, as seen in deviations from ideal flow predictions.

Systematic review of communication partner training in aphasia: methodological quality.

PubMed

Cherney, Leora R; Simmons-Mackie, Nina; Raymer, Anastasia; Armstrong, Elizabeth; Holland, Audrey

2013-10-01

Twenty-three studies identified from a previous systematic review examining the effects of communication partner training on persons with aphasia and their communication partners were evaluated for methodological quality. Two reviewers rated the studies on defined methodological quality criteria relevant to each study design. There were 11 group studies, seven single-subject participant design studies, and five qualitative studies. Quality scores were derived for each study. The mean inter-rater reliability of scores for each study design ranged from 85-93%, with Cohen's Kappa indicating substantial agreement between raters. Methodological quality of research on communication partner training in aphasia was highly varied. Overall, group studies employed the least rigorous methodology as compared to single subject and qualitative research. Only two of 11 group studies complied with more than half of the quality criteria. No group studies reported therapist blinding and only one group study reported participant blinding. Across all types of studies, the criterion of treatment fidelity was most commonly omitted. Failure to explicitly report certain methodological quality criteria may account for low ratings. Using methodological rating scales specific to the type of study design may help improve the methodological quality of aphasia treatment studies, including those on communication partner training.

DOE Office of Scientific and Technical Information (OSTI.GOV)

KRUGER AA; MATLACK KS; KOT WK

This document provides the final report on data and results obtained from a series of nine tests performed on the one-third scale DuraMelter{trademark} 1200 (DM1200) HLW Pilot Melter system that has been installed at VSL with an integrated prototypical off-gas treatment system. That system has replaced the DM1000 system that was used for HLW throughput testing during Part B1 [1]. Both melters have similar melt surface areas (1.2 m{sup 2}) but the DM1200 is prototypical of the present RPP-WTP HLW melter design whereas the DM1000 was not. These tests were performed under a corresponding RPP-WTP Test Specification and associated Testmore » Plans. The nine tests reported here were preceded by an initial series of short-duration tests conducted to support the start-up and commissioning of this system. This report is a followup to the previously issued Preliminary Data Summary Reports. The DM1200 system was deployed for testing and confirmation of basic design, operability, flow sheet, and process control assumptions as well as for support of waste form qualification and permitting. These tests include data on processing rates, off-gas treatment system performance, recycle stream compositions, as well as process operability and reliability. Consequently, this system is a key component of the overall HLW vitrification development strategy. The primary objective of the present series of tests was to determine the effects of a variety of parameters on the glass production rate in comparison to the RPP-WTP HL W design basis of 400 kg/m{sup 2}/d. Previous testing on the DMIOOO system [1] concluded that achievement of that rate with simulants of projected WTP melter feeds (AZ-101 and C-106/AY-102) was unlikely without the use of bubblers. As part of those tests, the same feed that was used during the cold-commissioning of the West Valley Demonstration Project (WVDP) HLW vitrification system was run on the DM1000 system. The DM1000 tests reproduced the rates that were obtained at the larger WVDP facility, lending confidence to the tests results [1]. Since the inclusion or exclusion of a bubbler has significant design implications, the Project commissioned further tests to address this issue. In an effort to identify factors that might increase the glass production rate for projected WTP melter feeds, a subsequent series of tests was performed on the DM100 system. Several tests variables led to glass production rate increases to values significantly above the 400 kg/m2/d requirement. However, while small-scale melter tests are useful for screening relative effects, they tend to overestimate absolute glass production rates, particularly for un-bubbled tests. Consequently, when scale-up effects were taken into account, it was not clear that any of the variables investigated would conclusively meet the 400 kg/m{sup 2}/d requirement without bubbling. The present series of tests was therefore performed on the DM1200 one-third scale HLW pilot melter system to provide the required basis for a final decision on whether bubblers would be included in the HLW melter. The present tests employed the same AZ-101 waste simulant and glass composition that was used for previous testing for consistency and comparability with the results from the earlier tests.« less

Using R in experimental design with BIBD: An application in health sciences

NASA Astrophysics Data System (ADS)

Oliveira, Teresa A.; Francisco, Carla; Oliveira, Amílcar; Ferreira, Agostinho

2016-06-01

Considering the implementation of an Experimental Design, in any field, the experimenter must pay particular attention and look for the best strategies in the following steps: planning the design selection, conduct the experiments, collect observed data, proceed to analysis and interpretation of results. The focus is on providing both - a deep understanding of the problem under research and a powerful experimental process at a reduced cost. Mainly thanks to the possibility of allowing to separate variation sources, the importance of Experimental Design in Health Sciences is strongly recommended since long time. Particular attention has been devoted to Block Designs and more precisely to Balanced Incomplete Block Designs - in this case the relevance states from the fact that these designs allow testing simultaneously a number of treatments bigger than the block size. Our example refers to a possible study of inter reliability of the Parkinson disease, taking into account the UPDRS (Unified Parkinson's disease rating scale) in order to test if there are significant differences between the specialists who evaluate the patients performances. Statistical studies on this disease were described for example in Richards et al (1994), where the authors investigate the inter-rater Reliability of the Unified Parkinson's Disease Rating Scale Motor Examination. We consider a simulation of a practical situation in which the patients were observed by different specialists and the UPDRS on assessing the impact of Parkinson's disease in patients was observed. Assigning treatments to the subjects following a particular BIBD(9,24,8,3,2) structure, we illustrate that BIB Designs can be used as a powerful tool to solve emerging problems in this area. Once a structure with repeated blocks allows to have some block contrasts with minimum variance, see Oliveira et al. (2006), the design with cardinality 12 was selected for the example. R software was used for computations.

Evidence of Chinese income dynamics and its effects on income scaling law

NASA Astrophysics Data System (ADS)

Xu, Yan; Wang, Yougui; Tao, Xiaobo; Ližbetinová, Lenka

2017-12-01

With personal annual income data of 5 consecutive years (1998-2002) from CHIPS, dynamic characteristics of Chinese income are studied, especially two hypotheses of time reversal symmetry and independent growth rate are tested. In high income regions, an increasing trend of the standard deviation of income growth rate is observed, which means independent growth rate hypothesis fails to hold. This empirical finding is designed as a new mechanism and added into Gibrat's model, which yields a distribution with a power-law tail. Our model's simulation result shows that increasing variance of income growth rates for higher income regions is the key ingredient to get the power-law tail.

Robust inference for responder analysis: Innovative clinical trial design using a minimum p-value approach.

PubMed

Lin, Yunzhi

2016-08-15

Responder analysis is in common use in clinical trials, and has been described and endorsed in regulatory guidance documents, especially in trials where "soft" clinical endpoints such as rating scales are used. The procedure is useful, because responder rates can be understood more intuitively than a difference in means of rating scales. However, two major issues arise: 1) such dichotomized outcomes are inefficient in terms of using the information available and can seriously reduce the power of the study; and 2) the results of clinical trials depend considerably on the response cutoff chosen, yet in many disease areas there is no consensus as to what is the most appropriate cutoff. This article addresses these two issues, offering a novel approach for responder analysis that could both improve the power of responder analysis and explore different responder cutoffs if an agreed-upon common cutoff is not present. Specifically, we propose a statistically rigorous clinical trial design that pre-specifies multiple tests of responder rates between treatment groups based on a range of pre-specified responder cutoffs, and uses the minimum of the p-values for formal inference. The critical value for hypothesis testing comes from permutation distributions. Simulation studies are carried out to examine the finite sample performance of the proposed method. We demonstrate that the new method substantially improves the power of responder analysis, and in certain cases, yields power that is approaching the analysis using the original continuous (or ordinal) measure.

Using Mason number to predict MR damper performance from limited test data

NASA Astrophysics Data System (ADS)

Becnel, Andrew C.; Wereley, Norman M.

2017-05-01

The Mason number can be used to produce a single master curve which relates MR fluid stress versus strain rate behavior across a wide range of shear rates, temperatures, and applied magnetic fields. As applications of MR fluid energy absorbers expand to a variety of industries and operating environments, Mason number analysis offers a path to designing devices with desired performance from a minimal set of preliminary test data. Temperature strongly affects the off-state viscosity of the fluid, as the passive viscous force drops considerably at higher temperatures. Yield stress is not similarly affected, and stays relatively constant with changing temperature. In this study, a small model-scale MR fluid rotary energy absorber is used to measure the temperature correction factor of a commercially-available MR fluid from LORD Corporation. This temperature correction factor is identified from shear stress vs. shear rate data collected at four different temperatures. Measurements of the MR fluid yield stress are also obtained and related to a standard empirical formula. From these two MR fluid properties - temperature-dependent viscosity and yield stress - the temperature-corrected Mason number is shown to predict the force vs. velocity performance of a full-scale rotary MR fluid energy absorber. This analysis technique expands the design space of MR devices to high shear rates and allows for comprehensive predictions of overall performance across a wide range of operating conditions from knowledge only of the yield stress vs. applied magnetic field and a temperature-dependent viscosity correction factor.

Genome-Scale Metabolic Model for the Green Alga Chlorella vulgaris UTEX 395 Accurately Predicts Phenotypes under Autotrophic, Heterotrophic, and Mixotrophic Growth Conditions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zuniga, Cristal; Li, Chien -Ting; Huelsman, Tyler

The green microalgae Chlorella vulgaris has been widely recognized as a promising candidate for biofuel production due to its ability to store high lipid content and its natural metabolic versatility. Compartmentalized genome-scale metabolic models constructed from genome sequences enable quantitative insight into the transport and metabolism of compounds within a target organism. These metabolic models have long been utilized to generate optimized design strategies for an improved production process. Here, we describe the reconstruction, validation, and application of a genome-scale metabolic model for C. vulgaris UTEX 395, iCZ843. The reconstruction represents the most comprehensive model for any eukaryotic photosynthetic organismmore » to date, based on the genome size and number of genes in the reconstruction. The highly curated model accurately predicts phenotypes under photoautotrophic, heterotrophic, and mixotrophic conditions. The model was validated against experimental data and lays the foundation for model-driven strain design and medium alteration to improve yield. Calculated flux distributions under different trophic conditions show that a number of key pathways are affected by nitrogen starvation conditions, including central carbon metabolism and amino acid, nucleotide, and pigment biosynthetic pathways. Moreover, model prediction of growth rates under various medium compositions and subsequent experimental validation showed an increased growth rate with the addition of tryptophan and methionine.« less

Evaluation of wireless sensor networks (WSNs) for remote wetland monitoring: design and initial results.

PubMed

Watras, Carl J; Morrow, Michael; Morrison, Ken; Scannell, Sean; Yaziciaglu, Steve; Read, Jordan S; Hu, Yu-Hen; Hanson, Paul C; Kratz, Tim

2014-02-01

Here, we describe and evaluate two low-power wireless sensor networks (WSNs) designed to remotely monitor wetland hydrochemical dynamics over time scales ranging from minutes to decades. Each WSN (one student-built and one commercial) has multiple nodes to monitor water level, precipitation, evapotranspiration, temperature, and major solutes at user-defined time intervals. Both WSNs can be configured to report data in near real time via the internet. Based on deployments in two isolated wetlands, we report highly resolved water budgets, transient reversals of flow path, rates of transpiration from peatlands and the dynamics of chromophoric-dissolved organic matter and bulk ionic solutes (specific conductivity)-all on daily or subdaily time scales. Initial results indicate that direct precipitation and evapotranspiration dominate the hydrologic budget of both study wetlands, despite their relatively flat geomorphology and proximity to elevated uplands. Rates of transpiration from peatland sites were typically greater than evaporation from open waters but were more challenging to integrate spatially. Due to the high specific yield of peat, the hydrologic gradient between peatland and open water varied with precipitation events and intervening periods of dry out. The resultant flow path reversals implied that the flux of solutes across the riparian boundary varied over daily time scales. We conclude that WSNs can be deployed in remote wetland-dominated ecosystems at relatively low cost to assess the hydrochemical impacts of weather, climate, and other perturbations.

Genome-Scale Metabolic Model for the Green Alga Chlorella vulgaris UTEX 395 Accurately Predicts Phenotypes under Autotrophic, Heterotrophic, and Mixotrophic Growth Conditions

DOE PAGES

Zuniga, Cristal; Li, Chien -Ting; Huelsman, Tyler; ...

2016-07-02

The green microalgae Chlorella vulgaris has been widely recognized as a promising candidate for biofuel production due to its ability to store high lipid content and its natural metabolic versatility. Compartmentalized genome-scale metabolic models constructed from genome sequences enable quantitative insight into the transport and metabolism of compounds within a target organism. These metabolic models have long been utilized to generate optimized design strategies for an improved production process. Here, we describe the reconstruction, validation, and application of a genome-scale metabolic model for C. vulgaris UTEX 395, iCZ843. The reconstruction represents the most comprehensive model for any eukaryotic photosynthetic organismmore » to date, based on the genome size and number of genes in the reconstruction. The highly curated model accurately predicts phenotypes under photoautotrophic, heterotrophic, and mixotrophic conditions. The model was validated against experimental data and lays the foundation for model-driven strain design and medium alteration to improve yield. Calculated flux distributions under different trophic conditions show that a number of key pathways are affected by nitrogen starvation conditions, including central carbon metabolism and amino acid, nucleotide, and pigment biosynthetic pathways. Moreover, model prediction of growth rates under various medium compositions and subsequent experimental validation showed an increased growth rate with the addition of tryptophan and methionine.« less

Genome-Scale Metabolic Model for the Green Alga Chlorella vulgaris UTEX 395 Accurately Predicts Phenotypes under Autotrophic, Heterotrophic, and Mixotrophic Growth Conditions.

PubMed

Zuñiga, Cristal; Li, Chien-Ting; Huelsman, Tyler; Levering, Jennifer; Zielinski, Daniel C; McConnell, Brian O; Long, Christopher P; Knoshaug, Eric P; Guarnieri, Michael T; Antoniewicz, Maciek R; Betenbaugh, Michael J; Zengler, Karsten

2016-09-01

The green microalga Chlorella vulgaris has been widely recognized as a promising candidate for biofuel production due to its ability to store high lipid content and its natural metabolic versatility. Compartmentalized genome-scale metabolic models constructed from genome sequences enable quantitative insight into the transport and metabolism of compounds within a target organism. These metabolic models have long been utilized to generate optimized design strategies for an improved production process. Here, we describe the reconstruction, validation, and application of a genome-scale metabolic model for C. vulgaris UTEX 395, iCZ843. The reconstruction represents the most comprehensive model for any eukaryotic photosynthetic organism to date, based on the genome size and number of genes in the reconstruction. The highly curated model accurately predicts phenotypes under photoautotrophic, heterotrophic, and mixotrophic conditions. The model was validated against experimental data and lays the foundation for model-driven strain design and medium alteration to improve yield. Calculated flux distributions under different trophic conditions show that a number of key pathways are affected by nitrogen starvation conditions, including central carbon metabolism and amino acid, nucleotide, and pigment biosynthetic pathways. Furthermore, model prediction of growth rates under various medium compositions and subsequent experimental validation showed an increased growth rate with the addition of tryptophan and methionine. © 2016 American Society of Plant Biologists. All rights reserved.

Genome-Scale Metabolic Model for the Green Alga Chlorella vulgaris UTEX 395 Accurately Predicts Phenotypes under Autotrophic, Heterotrophic, and Mixotrophic Growth Conditions1

PubMed Central

Zuñiga, Cristal; Li, Chien-Ting; Zielinski, Daniel C.; Guarnieri, Michael T.; Antoniewicz, Maciek R.; Zengler, Karsten

2016-01-01

The green microalga Chlorella vulgaris has been widely recognized as a promising candidate for biofuel production due to its ability to store high lipid content and its natural metabolic versatility. Compartmentalized genome-scale metabolic models constructed from genome sequences enable quantitative insight into the transport and metabolism of compounds within a target organism. These metabolic models have long been utilized to generate optimized design strategies for an improved production process. Here, we describe the reconstruction, validation, and application of a genome-scale metabolic model for C. vulgaris UTEX 395, iCZ843. The reconstruction represents the most comprehensive model for any eukaryotic photosynthetic organism to date, based on the genome size and number of genes in the reconstruction. The highly curated model accurately predicts phenotypes under photoautotrophic, heterotrophic, and mixotrophic conditions. The model was validated against experimental data and lays the foundation for model-driven strain design and medium alteration to improve yield. Calculated flux distributions under different trophic conditions show that a number of key pathways are affected by nitrogen starvation conditions, including central carbon metabolism and amino acid, nucleotide, and pigment biosynthetic pathways. Furthermore, model prediction of growth rates under various medium compositions and subsequent experimental validation showed an increased growth rate with the addition of tryptophan and methionine. PMID:27372244

A Nationwide Survey of Quality of End-of-Life Cancer Care in Designated Cancer Centers, Inpatient Palliative Care Units, and Home Hospices in Japan: The J-HOPE Study.

PubMed

Miyashita, Mitsunori; Morita, Tatsuya; Sato, Kazuki; Tsuneto, Satoru; Shima, Yasuo

2015-07-01

End-of-life (EOL) cancer care in general hospitals and home care has not previously been evaluated in Japan. This study aimed to evaluate EOL cancer care from the perspective of bereaved family members in nationwide designated cancer centers, inpatient palliative care units (PCUs), and home hospices in Japan. We conducted a cross-sectional, anonymous, self-report questionnaire survey for bereaved family members of cancer patients in March 2008 for 56 designated cancer centers and in June 2007 for 100 PCUs and 14 home hospices. Outcomes were overall care satisfaction, structure and process of care (Care Evaluation Scale), and achievement of a good death (Good Death Inventory). In designated cancer centers, PCUs, and home hospices, 2794 (response rate 59%), 5312 (response rate 69%), and 292 (response rate 67%) bereaved family members participated, respectively. Mean scores for overall care satisfaction were high for all places of death, at 4.3 ± 1.2 for designated cancer centers, 5.0 ± 1.2 for PCUs, and 5.0 ± 1.0 for home hospices. Designated cancer centers showed significantly lower ratings than PCUs and home hospices for structure and process of care and achievement of a good death (P = 0.0001 each). Home hospices were rated significantly higher than PCUs for achievement of a good death (P = 0.0001). The main findings of this study were: (1) overall, bereaved family members were satisfied with end-of-life care in all three places of death; (2) designated cancer centers were inferior to PCUs and home hospices and had more room for improvement; and 3) home hospices were rated higher than PCUs for achieving a good death, although home hospices remain uncommon in Japan. Copyright © 2015 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

A novel approach to assess clinical competence of postgraduate year 1 surgery residents

PubMed Central

Qi, Xin; Ding, Lian; Zhai, Wei; Li, Qiang; Li, Yan; Li, Haichao; Wen, Bing

2017-01-01

ABSTRACT Background: An increased demand for accountability and transparency in medicine have initiated a shift toward a more objective and standardized approach for postgraduate medical training. Objective: To develop and evaluate an objective method to assess clinical competence of postgraduate year 1 surgery residents. Design: Thirty-one postgraduate year 1 surgery residents, who had been trained in the Surgical School of Peking University First Hospital for one year, participated in an objective structured clinical examination as a final assessment of their clinical competence. A test station of irregular wound repair (debridement and suture) was specially designed to test the residents’ surgical integrative competence in a complex-trauma treatment procedure. A modified global rating scale, in combination with wound area measurement, was applied to evaluate residents’ surgical performance. The validity of the subjective global rating scale was evaluated by the objective measurement results from the software. Results: The global rating scale score had no obvious correlation with the area of the removed tissue and the residual wound area after the suture. There was significant difference in the debridement time and the residual wound area between 0–3 and >3 total stitches. There were significant differences in the area of the removed tissue between 0 and 1–2 grey stitches and 0 and 3–4 grey stitches, and in the residual wound area after suture between 0 and 3–4 grey stitches and 1–2 and 3–4 grey stitches. Conclusions: An irregular wound repair procedure could be an effective method to assess the integrative competence of surgery residents. The training for surgical thinking in the early stage of junior residents needs to be strengthened. The entire measurement process was more complex and time-consuming than expected. The possibility of measurement by simply counting the numbers of the key spots might be explored in the future. Abbreviations: ACS/APDS American College of Surgeons/Association of Program Directors in Surgery; GRS Global rating scale; LSD-T Least significant difference-test; OSATS Objective structured assessment of technical skills; OSCE Objective structured clinical examination; PBT Proficiency based training; PGY1 Postgraduate Year 1 PMID:28670976

Towards a Predictive Model of Quality in Canadian Child Care Centers

ERIC Educational Resources Information Center

Goelman, Hillel; Forer, Barry; Kershaw, Paul; Doherty, Gillian; Lero, Donna; LaGrange, Annette

2006-01-01

This paper reports on the design, methodology, and results of a study of quality in 326 classrooms in 239 Canadian child care centers. This study, the largest and most extensive ever undertaken in Canada, used the Caregiver Interaction Scale (CIS) to rate the adult-child interactions in the classrooms and the Infant-Toddler Environment Rating…

Quality of Care: A National Sample.

ERIC Educational Resources Information Center

Ferrari, Monica

This survey of 25 day care centers in 5 regions of Italy was designed to determine the characteristics of competent centers and the effects of differing local regulations on the quality of care provided. The Infant and Toddler Environment Rating Scale (ITERS) and a questionnaire were utilized to assess the quality of the day care centers in the…

Modeling fuel treatment leverage: Encounter rates, risk reduction, and suppression cost impacts

Treesearch

Matthew P. Thompson; Karin L. Riley; Dan Loeffler; Jessica R. Haas

2017-01-01

The primary theme of this study is the cost-effectiveness of fuel treatments at multiple scales of investment. We focused on the nexus of fuel management and suppression response planning, designing spatial fuel treatment strategies to incorporate landscape features that provide control opportunities that are relevant to fire operations. Our analysis explored the...

Clinical Use of the Pediatric Attention Disorders Diagnostic Screener for Children at Risk for Attention Deficit Hyperactivity Disorder: Case Illustrations

ERIC Educational Resources Information Center

Keiser, Ashley; Reddy, Linda

2013-01-01

The Pediatric Attention Disorders Diagnostic Screener is a multidimensional, computerized screening tool designed to assess attention and global aspects of executive functioning in children at risk for attention disorders. The screener consists of a semi-structured diagnostic interview, brief parent and teacher rating scales, 3 computer-based…

A Comparison of Asperger Symptom Rating Scales with Children and Adolescents

ERIC Educational Resources Information Center

Matson, Johnny L.; Dempsey, Timothy; Rivet, Tessa

2008-01-01

Asperger's syndrome (AS), first diagnosed in 1944, and has only recently begun to receive a great deal of research attention. An emerging controversy has been whether AS is a distinct condition from high functioning autism (HFA), and if so, can it be reliably and validly diagnosed. While measures designed specifically to aid in the screening and…

Validation Study of a Gatekeeping Attitude Index for Social Work Education

ERIC Educational Resources Information Center

Tam, Dora M. Y.; Coleman, Heather

2011-01-01

This article reports on a study designed to validate the Gatekeeping Attitude Index, a 14-item Likert scaling index. The authors collected data from a convenience sample of social work field instructors (N = 188) with a response rate of 74.0%. Construct validation by exploratory factor analysis identified a 2-factor solution on the index after…

77 FR 46034 - Utility Scale Wind Towers From the People's Republic of China: Preliminary Determination of Sales...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-02

... nacelle and rotor blades in a wind turbine with a minimum rated electrical power generation capacity in... efficiencies have been improving, and turbine heights have been rising to altitudes with much stronger winds... configurations that meet the minimum height requirement and are designed to support wind turbine electrical...

The Stakeholder Approach to the Construction of Performance Measures.

ERIC Educational Resources Information Center

Crawford, John C.

Glasgow Caledonian University Library (Scotland) conducted a pilot study to design a set of user chosen performance measures which can be used in British academic libraries for data collection. Members of 8 stakeholder groups were identified and given an 103-question survey, with each question to be rated on a 1-5 scale of importance. Stakeholder…

Factor Structure of the BASC-2 Behavioral and Emotional Screening System Student Form

ERIC Educational Resources Information Center

Dowdy, Erin; Twyford, Jennifer M.; Chin, Jenna K.; DiStefano, Christine A.; Kamphaus, Randy W.; Mays, Kristen L.

2011-01-01

The BASC-2 Behavioral and Emotional Screening System (BESS) Student Form (Kamphaus & Reynolds, 2007) is a recently developed youth self-report rating scale designed to identify students at risk for behavioral and emotional problems. The BESS Student Form was derived from the Behavior Assessment System for Children-Second Edition Self-Report of…

Big data and the industrialization of neuroscience: A safe roadmap for understanding the brain?

PubMed

Frégnac, Yves

2017-10-27

New technologies in neuroscience generate reams of data at an exponentially increasing rate, spurring the design of very-large-scale data-mining initiatives. Several supranational ventures are contemplating the possibility of achieving, within the next decade(s), full simulation of the human brain. Copyright © 2017, American Association for the Advancement of Science.

"Chips with Everything": A Laboratory Exercise for Comparing Subjective and Objective Measurements of Potato Chips

ERIC Educational Resources Information Center

Davies, Cathy

2005-01-01

The following laboratory exercise was designed to aid student understanding of the differences between subjective and objective measurements. Students assess the color and texture of different varieties of potato chip (crisps) by means of an intensity rating scale and a rank test and objectively with a colorimeter and texture analyzer. For data…

Not Wanted in the Inbox!: Evaluations of Unsolicited and Harassing E-Mail

ERIC Educational Resources Information Center

Khoo, Pek Ne; Senn, Charlene Y.

2004-01-01

This study was designed as a first step to explore sexual harassment in the electronic domain. One hundred six students read 10 e-mail messages ranging from jokes to spam to a sexual proposition from a stranger and rated them on an offensiveness evaluative scale. Participants also completed social desirability and attitudes toward sexual…

The Pathways fertility preservation decision aid website for women with cancer: development and field testing.

PubMed

Woodard, Terri L; Hoffman, Aubri S; Covarrubias, Laura A; Holman, Deborah; Schover, Leslie; Bradford, Andrea; Hoffman, Derek B; Mathur, Aakrati; Thomas, Jerah; Volk, Robert J

2018-02-01

To improve survivors' awareness and knowledge of fertility preservation counseling and treatment options, this study engaged survivors and providers to design, develop, and field-test Pathways: a fertility preservation patient decision aid website for young women with cancer©. Using an adapted user-centered design process, our stakeholder advisory group and research team designed and optimized the Pathways patient decision aid website through four iterative cycles of review and revision with clinicians (n = 21) and survivors (n = 14). Field-testing (n = 20 survivors) assessed post-decision aid scores on the Fertility Preservation Knowledge Scale, feasibility of assessing women's decision-making values while using the website, and website usability/acceptability ratings. Iterative stakeholder engagement optimized the Pathways decision aid website to meet survivors' and providers' needs, including providing patient-friendly information and novel features such as interactive value clarification exercises, testimonials that model shared decision making, financial/referral resources, and a printable personal summary. Survivors scored an average of 8.2 out of 13 (SD 1.6) on the Fertility Preservation Knowledge Scale. They rated genetic screening and having a biological child as strong factors in their decision-making, and 71% indicated a preference for egg freezing. Most women (> 85%) rated Pathways favorably, and all women (100%) said they would recommend it to other women. The Pathways decision aid is a usable and acceptable tool to help women learn about fertility preservation. The Pathways decision aid may help women make well-informed values-based decisions and prevent future infertility-related distress.

Effect of substrate concentration on hydrogen production by photo-fermentation in the pilot-scale baffled bioreactor.

PubMed

Lu, Chaoyang; Zhang, Zhiping; Zhou, Xuehua; Hu, Jianjun; Ge, Xumeng; Xia, Chenxi; Zhao, Jia; Wang, Yi; Jing, Yanyan; Li, Yameng; Zhang, Quanguo

2018-01-01

Effect of substrate concentration on photo-fermentative hydrogen production was studied with a self-designed 4m 3 pilot-scale baffled photo-fermentative hydrogen production reactor (BPHR). The relationships between parameters, such as hydrogen production rate (HPR, mol H 2 /m 3 /d), hydrogen concentration, pH value, oxidation-reduction potential, biomass concentration (volatile suspended solids, VSS) and reducing sugar concentration, during the photo-fermentative hydrogen production process were investigated. The highest HPR of 202.64±8.83mol/m 3 /d was achieved in chamber #3 at a substrate concentration of 20g/L. Hydrogen contents were in the range of 42.19±0.94%-49.71±0.27%. HPR increased when organic loading rate was increased from 3.3 to 20g/L/d, then decreased when organic loading rate was further increased to 25g/L/d. A maximum HPR of 148.65±4.19mol/m 3 /d was obtained when organic loading rate was maintained at 20g/L/d during continuous bio-hydrogen production. Copyright © 2017 Elsevier Ltd. All rights reserved.

Content and face validity of a comprehensive robotic skills training program for general surgery, urology, and gynecology.

PubMed

Dulan, Genevieve; Rege, Robert V; Hogg, Deborah C; Gilberg-Fisher, Kristine K; Tesfay, Seifu T; Scott, Daniel J

2012-04-01

The authors previously developed a comprehensive, proficiency-based robotic training curriculum that aimed to address 23 unique skills identified via task deconstruction of robotic operations. The purpose of this study was to determine the content and face validity of this curriculum. Expert robotic surgeons (n = 12) rated each deconstructed skill regarding relevance to robotic operations, were oriented to the curricular components, performed 3 to 5 repetitions on the 9 exercises, and rated each exercise. In terms of content validity, experts rated all 23 deconstructed skills as highly relevant (4.5 on a 5-point scale). Ratings for the 9 inanimate exercises indicated moderate to thorough measurement of designated skills. For face validity, experts indicated that each exercise effectively measured relevant skills (100% agreement) and was highly effective for training and assessment (4.5 on a 5-point scale). These data indicate that the 23 deconstructed skills accurately represent the appropriate content for robotic skills training and strongly support content and face validity for this curriculum. Copyright © 2012. Published by Elsevier Inc.

Effect of lift-to-drag ratio in pilot rating of the HL-20 landing task

NASA Technical Reports Server (NTRS)

Jackson, E. B.; Rivers, Robert A.; Bailey, Melvin L.

1993-01-01

A man-in-the-loop simulation study of the handling qualities of the HL-20 lifting-body vehicle was made in a fixed-base simulation cockpit at NASA Langley Research Center. The purpose of the study was to identify and substantiate opportunities for improving the original design of the vehicle from a handling qualities and landing performance perspective. Using preliminary wind-tunnel data, a subsonic aerodynamic model of the HL-20 was developed. This model was adequate to simulate the last 75-90 s of the approach and landing. A simple flight-control system was designed and implemented. Using this aerodynamic model as a baseline, visual approaches and landings were made at several vehicle lift-to-drag ratios. Pilots rated the handling characteristics of each configuration using a conventional numerical pilot-rating scale. Results from the study showed a high degree of correlation between the lift-to-drag ratio and pilot rating. Level 1 pilot ratings were obtained when the L/D ratio was approximately 3.8 or higher.

Effect of lift-to-drag ratio in pilot rating of the HL-20 landing task

NASA Astrophysics Data System (ADS)

Jackson, E. B.; Rivers, Robert A.; Bailey, Melvin L.

1993-10-01

A man-in-the-loop simulation study of the handling qualities of the HL-20 lifting-body vehicle was made in a fixed-base simulation cockpit at NASA Langley Research Center. The purpose of the study was to identify and substantiate opportunities for improving the original design of the vehicle from a handling qualities and landing performance perspective. Using preliminary wind-tunnel data, a subsonic aerodynamic model of the HL-20 was developed. This model was adequate to simulate the last 75-90 s of the approach and landing. A simple flight-control system was designed and implemented. Using this aerodynamic model as a baseline, visual approaches and landings were made at several vehicle lift-to-drag ratios. Pilots rated the handling characteristics of each configuration using a conventional numerical pilot-rating scale. Results from the study showed a high degree of correlation between the lift-to-drag ratio and pilot rating. Level 1 pilot ratings were obtained when the L/D ratio was approximately 3.8 or higher.

Consensus Conference Follow-up: Inter-rater Reliability Assessment of the Best Evidence in Emergency Medicine (BEEM) Rater Scale, a Medical Literature Rating Tool for Emergency Physicians

PubMed Central

Worster, Andrew; Kulasegaram, Kulamakan; Carpenter, Christopher R.; Vallera, Teresa; Upadhye, Suneel; Sherbino, Jonathan; Haynes, R. Brian

2011-01-01

Background Studies published in general and specialty medical journals have the potential to improve emergency medicine (EM) practice, but there can be delayed awareness of this evidence because emergency physicians (EPs) are unlikely to read most of these journals. Also, not all published studies are intended for or ready for clinical practice application. The authors developed “Best Evidence in Emergency Medicine” (BEEM) to ameliorate these problems by searching for, identifying, appraising, and translating potentially practice-changing studies for EPs. An initial step in the BEEM process is the BEEM rater scale, a novel tool for EPs to collectively evaluate the relative clinical relevance of EM-related studies found in more than 120 journals. The BEEM rater process was designed to serve as a clinical relevance filter to identify those studies with the greatest potential to affect EM practice. Therefore, only those studies identified by BEEM raters as having the highest clinical relevance are selected for the subsequent critical appraisal process and, if found methodologically sound, are promoted as the best evidence in EM. Objectives The primary objective was to measure inter-rater reliability (IRR) of the BEEM rater scale. Secondary objectives were to determine the minimum number of EP raters needed for the BEEM rater scale to achieve acceptable reliability and to compare performance of the scale against a previously published evidence rating system, the McMaster Online Rating of Evidence (MORE), in an EP population. Methods The authors electronically distributed the title, conclusion, and a PubMed link for 23 recently published studies related to EM to a volunteer group of 134 EPs. The volunteers answered two demographic questions and rated the articles using one of two randomly assigned seven-point Likert scales, the BEEM rater scale (n = 68) or the MORE scale (n = 66), over two separate administrations. The IRR of each scale was measured using generalizability theory. Results The IRR of the BEEM rater scale ranged between 0.90 (95% confidence interval [CI] = 0.86 to 0.93) to 0.92 (95% CI = 0.89 to 0.94) across administrations. Decision studies showed a minimum of 12 raters is required for acceptable reliability of the BEEM rater scale. The IRR of the MORE scale was 0.82 to 0.84. Conclusions The BEEM rater scale is a highly reliable, single-question tool for a small number of EPs to collectively rate the relative clinical relevance within the specialty of EM of recently published studies from a variety of medical journals. It compares favorably with the MORE system because it achieves a high IRR despite simply requiring raters to read each article’s title and conclusion. PMID:22092904

Power analysis to detect treatment effects in longitudinal clinical trials for Alzheimer's disease.

PubMed

Huang, Zhiyue; Muniz-Terrera, Graciela; Tom, Brian D M

2017-09-01

Assessing cognitive and functional changes at the early stage of Alzheimer's disease (AD) and detecting treatment effects in clinical trials for early AD are challenging. Under the assumption that transformed versions of the Mini-Mental State Examination, the Clinical Dementia Rating Scale-Sum of Boxes, and the Alzheimer's Disease Assessment Scale-Cognitive Subscale tests'/components' scores are from a multivariate linear mixed-effects model, we calculated the sample sizes required to detect treatment effects on the annual rates of change in these three components in clinical trials for participants with mild cognitive impairment. Our results suggest that a large number of participants would be required to detect a clinically meaningful treatment effect in a population with preclinical or prodromal Alzheimer's disease. We found that the transformed Mini-Mental State Examination is more sensitive for detecting treatment effects in early AD than the transformed Clinical Dementia Rating Scale-Sum of Boxes and Alzheimer's Disease Assessment Scale-Cognitive Subscale. The use of optimal weights to construct powerful test statistics or sensitive composite scores/endpoints can reduce the required sample sizes needed for clinical trials. Consideration of the multivariate/joint distribution of components' scores rather than the distribution of a single composite score when designing clinical trials can lead to an increase in power and reduced sample sizes for detecting treatment effects in clinical trials for early AD.

Energy Dissipation in Earthquake Soil Structure Interaction: The September 3rd, 2016 M5.8 Pawnee Oklahoma Earthquake

NASA Astrophysics Data System (ADS)

Yang, H.; Sinha, S. K.; Feng, Y.; Jeremic, B.

2016-12-01

The M5.8 earthquake occurred in Pawnee, Oklahoma on September 3rd 2016 is the strongest seismic event recorded in Oklahoma. Soil structure interaction (SSI) played an important role in this tragic event. As a major aspect of SSI analysis, the propagation and dissipation of seismic energy will be studied in depth, with particular focus on the ground motion recorded in this earthquake. Seismic energy propagates from seismic source to the SSI system and is dissipated within and around the SSI system. Energy dissipation with the SSI system is related to inelastic behavior of soil, rock, contact zone (foundation-soil/rock), structural components and energy dissipators. Accurate evaluation of seismic energy can be used to optimize SSI system for safety and economy. The SSI system can be designed so that majority of seismic energy is dissipated within soil and soil-foundation contact zone, away from the structure.Accurate and theoretically sound modeling of propagation and dissipation is essential to use of seismic energy for design and assessment. The rate of plastic work is defined as the product of stress and the rate of plastic strain. On the other hand, plastic dissipation is defined as a form of heat transfer. The difference between these two quantities, which has been neglected in many studies, is a plastic part of the free energy. By considering energy storage and dissipation at both micro (particle) scale and macro (continuum) scale, it can be shown that the plastic free energy is an intrinsic attribute at the continuum scale due to particle rearrangement. Proper application of thermodynamics to finite element simulations, plastic dissipation can be correctly modeled. Examples will be used to illustrate above point on both constitutive, single element and SSI model scales. In addition, propagation of seismic energy, its dissipation (timing and location) will be used to illustrate use in design and assessment.

Sources of self-efficacy belief: development and validation of two scales.

PubMed

Liu, Ou Lydia; Wilson, Mark

2010-01-01

Self-efficacy belief has been an instrumental affective factor in predicting student behavior and achievement in academic settings. Although there is abundant literature on efficacy belief per se, the sources of efficacy belief have not been fully researched. Very few instruments exist to quantify the sources of efficacy-beliefs. To fill this void, we developed two scales for the two main sources of self-efficacy belief: past performance and social persuasion. Pilot test data were collected from 255 middle school students. A self-efficacy measure was also administered to the students as a criterion measure. The Rasch rating scale model was used to analyze the data. Information on item fit, item design, content validity, external validity, internal consistency, and person separation reliability was examined. The two scales displayed satisfactory psychometric properties. Applications and limitations of these two scales are also discussed.

Operation of an aquatic worm reactor suitable for sludge reduction at large scale.

PubMed

Hendrickx, Tim L G; Elissen, Hellen H J; Temmink, Hardy; Buisman, Cees J N

2011-10-15

Treatment of domestic waste water results in the production of waste sludge, which requires costly further processing. A biological method to reduce the amount of waste sludge and its volume is treatment in an aquatic worm reactor. The potential of such a worm reactor with the oligochaete Lumbriculus variegatus has been shown at small scale. For scaling up purposes, a new configuration of the reactor was designed, in which the worms were positioned horizontally in the carrier material. This was tested in a continuous experiment of 8 weeks where it treated all the waste sludge from a lab-scale activated sludge process. The results showed a higher worm growth rate compared to previous experiments with the old configuration, whilst nutrient release was similar. The new configuration has a low footprint and allows for easy aeration and faeces collection, thereby making it suitable for full scale application. Copyright © 2011 Elsevier Ltd. All rights reserved.

Freezable Radiator Coupon Testing and Full Scale Radiator Design

NASA Technical Reports Server (NTRS)

Lillibridge, Sean T.; Guinn, John; Cognata, Thomas; Navarro, Moses

2009-01-01

Freezable radiators offer an attractive solution to the issue of thermal control system scalability. As thermal environments change, a freezable radiator will effectively scale the total heat rejection it is capable of as a function of the thermal environment and flow rate through the radiator. Scalable thermal control systems are a critical technology for spacecraft that will endure missions with widely varying thermal requirements. These changing requirements are a result of the space craft s surroundings and because of different thermal loads during different mission phases. However, freezing and thawing (recovering) a radiator is a process that has historically proven very difficult to predict through modeling, resulting in highly inaccurate predictions of recovery time. This paper summarizes tests on three test articles that were performed to further empirically quantify the behavior of a simple freezable radiator, and the culmination of those tests into a full scale design. Each test article explored the bounds of freezing and recovery behavior, as well as providing thermo-physical data of the working fluid, a 50-50 mixture of DowFrost HD and water. These results were then used as a tool for developing correlated thermal model in Thermal Desktop which could be used for modeling the behavior of a full scale thermal control system for a lunar mission. The final design of a thermal control system for a lunar mission is also documented in this paper.

Outcome Rating Scale and Session Rating Scale in Psychological Practice: Clinical Utility of Ultra-Brief Measures

ERIC Educational Resources Information Center

Campbell, Alistair; Hemsley, Samantha

2009-01-01

The validity and reliability of the Outcome Rating Scale (ORS) and the Session Rating Scale (SRS) were evaluated against existing longer measures, including the Outcome Questionnaire-45, Working Alliance Inventory, Depression Anxiety Stress Scale-21, Quality of Life Scale, Rosenberg Self-Esteem Scale and General Self-efficacy Scale. The measures…

Dystonia rating scales: critique and recommendations

PubMed Central

Albanese, Alberto; Sorbo, Francesca Del; Comella, Cynthia; Jinnah, H.A.; Mink, Jonathan W.; Post, Bart; Vidailhet, Marie; Volkmann, Jens; Warner, Thomas T.; Leentjens, Albert F.G.; Martinez-Martin, Pablo; Stebbins, Glenn T.; Goetz, Christopher G.; Schrag, Anette

2014-01-01

Background Many rating scales have been applied to the evaluation of dystonia, but only few have been assessed for clinimetric properties. The Movement Disorders Society commissioned this task force to critique existing dystonia rating scales and place them in the clinical and clinimetric context. Methods A systematic literature review was conducted to identify rating scales that have either been validated or used in dystonia. Results Thirty six potential scales were identified. Eight were excluded because they did not meet review criteria, leaving twenty-eight scales that were critiqued and rated by the task force. Seven scales were found to meet criteria to be “recommended”: the Blepharospasm Disability Index is recommended for rating blepharospasm; the Cervical Dystonia Impact Scale and the Toronto Western Spasmodic Torticollis Rating Scale for rating cervical dystonia; the Craniocervical Dystonia Questionnaire for blepharospasm and cervical dystonia; the Voice Handicap Index (VHI) and the Vocal Performance Questionnaire (VPQ) for laryngeal dystonia; and the Fahn-Marsden Dystonia Rating Scale for rating generalized dystonia. Two “recommended” scales (VHI and VPQ) are generic scales validated on few patients with laryngeal dystonia, whereas the others are disease-specific scales. Twelve scales met criteria for “suggested” and seven scales met criteria for “listed”. All the scales are individually reviewed in the online appendix. Conclusion The task force recommends five specific dystonia scales and suggests to further validate in dystonia two recommended generic voice-disorder scales. Existing scales for oromandibular, arm and task-specific dystonia should be refined and fully assessed. Scales should be developed for body regions where no scales are available, such as lower limbs and trunk. PMID:23893443

Dual Temporal Scale Convolutional Neural Network for Micro-Expression Recognition

PubMed Central

Peng, Min; Wang, Chongyang; Chen, Tong; Liu, Guangyuan; Fu, Xiaolan

2017-01-01

Facial micro-expression is a brief involuntary facial movement and can reveal the genuine emotion that people try to conceal. Traditional methods of spontaneous micro-expression recognition rely excessively on sophisticated hand-crafted feature design and the recognition rate is not high enough for its practical application. In this paper, we proposed a Dual Temporal Scale Convolutional Neural Network (DTSCNN) for spontaneous micro-expressions recognition. The DTSCNN is a two-stream network. Different of stream of DTSCNN is used to adapt to different frame rate of micro-expression video clips. Each stream of DSTCNN consists of independent shallow network for avoiding the overfitting problem. Meanwhile, we fed the networks with optical-flow sequences to ensure that the shallow networks can further acquire higher-level features. Experimental results on spontaneous micro-expression databases (CASME I/II) showed that our method can achieve a recognition rate almost 10% higher than what some state-of-the-art method can achieve. PMID:29081753

Combination of Universal Mechanical Testing Machine with Atomic Force Microscope for Materials Research

PubMed Central

Zhong, Jian; He, Dannong

2015-01-01

Surface deformation and fracture processes of materials under external force are important for understanding and developing materials. Here, a combined horizontal universal mechanical testing machine (HUMTM)-atomic force microscope (AFM) system is developed by modifying UMTM to combine with AFM and designing a height-adjustable stabilizing apparatus. Then the combined HUMTM-AFM system is evaluated. Finally, as initial demonstrations, it is applied to analyze the relationship among macroscopic mechanical properties, surface nanomorphological changes under external force, and fracture processes of two kinds of representative large scale thin film materials: polymer material with high strain rate (Parafilm) and metal material with low strain rate (aluminum foil). All the results demonstrate the combined HUMTM-AFM system overcomes several disadvantages of current AFM-combined tensile/compression devices including small load force, incapability for large scale specimens, disability for materials with high strain rate, and etc. Therefore, the combined HUMTM-AFM system is a promising tool for materials research in the future. PMID:26265357

Combination of Universal Mechanical Testing Machine with Atomic Force Microscope for Materials Research.

PubMed

Zhong, Jian; He, Dannong

2015-08-12

Surface deformation and fracture processes of materials under external force are important for understanding and developing materials. Here, a combined horizontal universal mechanical testing machine (HUMTM)-atomic force microscope (AFM) system is developed by modifying UMTM to combine with AFM and designing a height-adjustable stabilizing apparatus. Then the combined HUMTM-AFM system is evaluated. Finally, as initial demonstrations, it is applied to analyze the relationship among macroscopic mechanical properties, surface nanomorphological changes under external force, and fracture processes of two kinds of representative large scale thin film materials: polymer material with high strain rate (Parafilm) and metal material with low strain rate (aluminum foil). All the results demonstrate the combined HUMTM-AFM system overcomes several disadvantages of current AFM-combined tensile/compression devices including small load force, incapability for large scale specimens, disability for materials with high strain rate, and etc. Therefore, the combined HUMTM-AFM system is a promising tool for materials research in the future.

Bioreactor Scalability: Laboratory-Scale Bioreactor Design Influences Performance, Ecology, and Community Physiology in Expanded Granular Sludge Bed Bioreactors

PubMed Central

Connelly, Stephanie; Shin, Seung G.; Dillon, Robert J.; Ijaz, Umer Z.; Quince, Christopher; Sloan, William T.; Collins, Gavin

2017-01-01

Studies investigating the feasibility of new, or improved, biotechnologies, such as wastewater treatment digesters, inevitably start with laboratory-scale trials. However, it is rarely determined whether laboratory-scale results reflect full-scale performance or microbial ecology. The Expanded Granular Sludge Bed (EGSB) bioreactor, which is a high-rate anaerobic digester configuration, was used as a model to address that knowledge gap in this study. Two laboratory-scale idealizations of the EGSB—a one-dimensional and a three- dimensional scale-down of a full-scale design—were built and operated in triplicate under near-identical conditions to a full-scale EGSB. The laboratory-scale bioreactors were seeded using biomass obtained from the full-scale bioreactor, and, spent water from the distillation of whisky from maize was applied as substrate at both scales. Over 70 days, bioreactor performance, microbial ecology, and microbial community physiology were monitored at various depths in the sludge-beds using 16S rRNA gene sequencing (V4 region), specific methanogenic activity (SMA) assays, and a range of physical and chemical monitoring methods. SMA assays indicated dominance of the hydrogenotrophic pathway at full-scale whilst a more balanced activity profile developed during the laboratory-scale trials. At each scale, Methanobacterium was the dominant methanogenic genus present. Bioreactor performance overall was better at laboratory-scale than full-scale. We observed that bioreactor design at laboratory-scale significantly influenced spatial distribution of microbial community physiology and taxonomy in the bioreactor sludge-bed, with 1-D bioreactor types promoting stratification of each. In the 1-D laboratory bioreactors, increased abundance of Firmicutes was associated with both granule position in the sludge bed and increased activity against acetate and ethanol as substrates. We further observed that stratification in the sludge-bed in 1-D laboratory-scale bioreactors was associated with increased richness in the underlying microbial community at species (OTU) level and improved overall performance. PMID:28507535

Enabling Large-Scale Design, Synthesis and Validation of Small Molecule Protein-Protein Antagonists

PubMed Central

Koes, David; Khoury, Kareem; Huang, Yijun; Wang, Wei; Bista, Michal; Popowicz, Grzegorz M.; Wolf, Siglinde; Holak, Tad A.; Dömling, Alexander; Camacho, Carlos J.

2012-01-01

Although there is no shortage of potential drug targets, there are only a handful known low-molecular-weight inhibitors of protein-protein interactions (PPIs). One problem is that current efforts are dominated by low-yield high-throughput screening, whose rigid framework is not suitable for the diverse chemotypes present in PPIs. Here, we developed a novel pharmacophore-based interactive screening technology that builds on the role anchor residues, or deeply buried hot spots, have in PPIs, and redesigns these entry points with anchor-biased virtual multicomponent reactions, delivering tens of millions of readily synthesizable novel compounds. Application of this approach to the MDM2/p53 cancer target led to high hit rates, resulting in a large and diverse set of confirmed inhibitors, and co-crystal structures validate the designed compounds. Our unique open-access technology promises to expand chemical space and the exploration of the human interactome by leveraging in-house small-scale assays and user-friendly chemistry to rationally design ligands for PPIs with known structure. PMID:22427896

Numerical Modeling of Propellant Boil-Off in a Cryogenic Storage Tank

NASA Technical Reports Server (NTRS)

Majumdar, A. K.; Steadman, T. E.; Maroney, J. L.; Sass, J. P.; Fesmire, J. E.

2007-01-01

A numerical model to predict boil-off of stored propellant in large spherical cryogenic tanks has been developed. Accurate prediction of tank boil-off rates for different thermal insulation systems was the goal of this collaboration effort. The Generalized Fluid System Simulation Program, integrating flow analysis and conjugate heat transfer for solving complex fluid system problems, was used to create the model. Calculation of tank boil-off rate requires simultaneous simulation of heat transfer processes among liquid propellant, vapor ullage space, and tank structure. The reference tank for the boil-off model was the 850,000 gallon liquid hydrogen tank at Launch Complex 39B (LC- 39B) at Kennedy Space Center, which is under study for future infrastructure improvements to support the Constellation program. The methodology employed in the numerical model was validated using a sub-scale model and tank. Experimental test data from a 1/15th scale version of the LC-39B tank using both liquid hydrogen and liquid nitrogen were used to anchor the analytical predictions of the sub-scale model. Favorable correlations between sub-scale model and experimental test data have provided confidence in full-scale tank boil-off predictions. These methods are now being used in the preliminary design for other cases including future launch vehicles

A Rating Scale for the Functional Assessment of Patients with Familial Dysautonomia (Riley Day Syndrome)

PubMed Central

Axelrod, Felicia B.; Rolnitzky, Linda; von Simson, Gabrielle Gold; Berlin, Dena; Kaufmann, Horacio

2012-01-01

Objective To develop a reliable rating scale to assess functional capacity in children with familial dysautonomia, evaluate changes over time and determine whether severity within a particular functional category at a young age affected survival. Study design Ten functional categories were retrospectively assessed in 123 patients with familial dysautonomia at age 7 years ± 6 months. Each of the ten Functional Severity Scale (FuSS) categories (motor development, cognitive ability, psychological status, expressive speech, balance, oral coordination, frequency of dysautonomic crisis, respiratory, cardiovascular and nutritional status) was scored from 1 (worst or severely affected) to 5 (best or no impairment). Changes over time were analyzed further in 22 of the 123 patients who were also available at ages 17 and 27 years. Results Severely impaired cardiovascular function and high frequency of dysautonomic crisis negatively affected survival (p<0.005 and p<0.001, respectively). In the 22 individuals followed up to age 27 years, psychological status significantly worsened (p=0.01), and expressive speech improved (p=0.045). From age 17 to 27 years, balance worsened markedly (p =0.048). Conclusion The FuSS scale is a reliable tool to measure functional capacity in patients with familial dysautonomia. The scale may prove useful in providing prognosis and as a complementary endpoint in clinical trials. PMID:22727867

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walters, C.T.; Dulaney, J.L.; Campbell, B.E.

Demonstrations of operation of a compact neodymium glass laser with average output powers greater than 1 kW for several seconds are reported. The laser is based on the thermal inertia laser (TIL) concept wherein a neodymium-doped glass rod is pumped uniformly without cooling during a burst mode of laser operation. Design principles for TIL devices and scaling to 100 kW class lasers are discussed. Experimental results for a low repetition-rate proof-of-concept pulsed device (30 J, 0.2 Hz) and a high repetition-rate pulsed prototype (40 J, 36 Hz) are presented and compared to numerical solutions for the laser rate equations withmore » temperature dependent cross-sections.« less

A similitude method and the corresponding blade design of a low-speed large-scale axial compressor rotor

NASA Astrophysics Data System (ADS)

Yu, Chenghai; Ma, Ning; Wang, Kai; Du, Juan; Van den Braembussche, R. A.; Lin, Feng

2014-04-01

A similitude method to model the tip clearance flow in a high-speed compressor with a low-speed model is presented in this paper. The first step of this method is the derivation of similarity criteria for tip clearance flow, on the basis of an inviscid model of tip clearance flow. The aerodynamic parameters needed for the model design are then obtained from a numerical simulation of the target high-speed compressor rotor. According to the aerodynamic and geometric parameters of the target compressor rotor, a large-scale low-speed rotor blade is designed with an inverse blade design program. In order to validate the similitude method, the features of tip clearance flow in the low-speed model compressor are compared with the ones in the high-speed compressor at both design and small flow rate points. It is found that not only the trajectory of the tip leakage vortex but also the interface between the tip leakage flow and the incoming main flow in the high-speed compressor match well with that of its low speed model. These results validate the effectiveness of the similitude method for the tip clearance flow proposed in this paper.

Scale-Dependent Rates of Uranyl Surface Complexation Reaction in Sediments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Chongxuan; Shang, Jianying; Kerisit, Sebastien N.

Scale-dependency of uranyl[U(VI)] surface complexation rates was investigated in stirred flow-cell and column systems using a U(VI)-contaminated sediment from the US Department of Energy, Hanford site, WA. The experimental results were used to estimate the apparent rate of U(VI) surface complexation at the grain-scale and in porous media. Numerical simulations using molecular, pore-scale, and continuum models were performed to provide insights into and to estimate the rate constants of U(VI) surface complexation at the different scales. The results showed that the grain-scale rate constant of U(VI) surface complexation was over 3 to 10 orders of magnitude smaller, dependent on themore » temporal scale, than the rate constant calculated using the molecular simulations. The grain-scale rate was faster initially and slower with time, showing the temporal scale-dependency. The largest rate constant at the grain-scale decreased additional 2 orders of magnitude when the rate was scaled to the porous media in the column. The scaling effect from the grain-scale to the porous media became less important for the slower sorption sites. Pore-scale simulations revealed the importance of coupled mass transport and reactions in both intragranular and inter-granular domains, which caused both spatial and temporal dependence of U(VI) surface complexation rates in the sediment. Pore-scale simulations also revealed a new rate-limiting mechanism in the intragranular porous domains that the rate of coupled diffusion and surface complexation reaction was slower than either process alone. The results provided important implications for developing models to scale geochemical/biogeochemical reactions.« less

Lightweight Vacuum Jacket for Cryogenic Insulation - Appendices to Final Report. Volume 2

NASA Technical Reports Server (NTRS)

Barclay, D. L.; Bell, J. E.; Brogren, E. W.; Straayer, J. W.

1975-01-01

The feasibility is demonstrated of producing a lightweight vacuum jacket using state-of-the-art technology and materials. Design and analytical studies were made on an orbital maneuvering system fuel tank. Preliminary design details were completed for the tank assembly which included an optimized vacuum jacket and multilayered insulation system. A half-scale LH2 test model was designed and fabricated and a force/stiffness proof test was conducted on the vacuum jacket. A vacuum leak rate of 0.00001 was measured, approximately 1500 hours of vacuum pressure was sustained, and 29 vacuum pressure cycles were experienced prior to failure. For vol. 1, see N75-26192.

Empathy scores in medical school and ratings of empathic behavior in residency training 3 years later.

PubMed

Hojat, Mohammadreza; Mangione, Salvatore; Nasca, Thomas J; Gonnella, Joseph S; Magee, Mike

2005-12-01

The authors designed the present study to examine the association between individuals' scores on the Jefferson Scale of Physician Empathy (JSPE; M. Hojat, J. S. Gonnella, S. Mangione, T. J. Nasca, & M. Magee, 2003; M. Hojat, J. S. Gonnella, T. J. Nasca, S. Mangione, M. Vergare, & M. Magee, 2002; M. Hojat, S. Mangione, T. J. Nasca, M. J. M. Cohen, J. S. Gonnella, J. B. Erdmann, J. J. Veloski, & M. Magee, 2001), a self-report empathy scale, during medical school and ratings of their empathic behavior made by directors of their residency training programs 3 years later. Participants were 106 physicians. The authors examined the relationships between scores on the JSPE (with 20 Likert-type items) at the beginning of the students' 3rd year of medical school and ratings of their empathic behavior made by directors of their residency training programs. Top scorers on the JSPE in medical school, compared to Bottom scorers, obtained a significantly higher average rating of empathic behavior in residency 3 years later (p < .05, effect size = 0.50). The findings support the long-term predictive validity of the self-report empathy scale, JSPE, despite different methods of evaluations (self-report and supervisors' ratings) and despite a time interval between evaluations (3 years). Because empathy is relevant to prosocial and helping behavior, it is important for investigators to further enhance our understanding of its correlates and outcomes among health professionals.

Postmenopausal symptoms among Egyptian geripausal women.

PubMed

Sweed, H S; Elawam, A E; Nabeel, A M; Mortagy, K

2012-03-01

Increases in life expectancies mean that women are spending longer periods of their life in a hypo-oestrogenic state. A cross-sectional study was designed to assess the prevalence of postmenopausal symptoms among elderly Egyptian women in the geripausal phase. A sample of 400 community-dwelling elderly women aged > 65 years were recruited from 6 geriatric social clubs in Cairo. A full personal and medical history was taken from all participants. The menopause rating scale was applied to all participants after translation and linguistic validation in the Arabic language. The most prevalent postmenopausal symptoms were joint pain (90.3%), followed by sleep problems (84.0%) and physical and mental exhaustion (80.0%). A statistically significant positive correlation was found between total menopause rating scale score and age, duration of menopause and number of chronic diseases but not with age of menopause.

The suitability of ultrafine coal as an industrial boiler fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barratt, D.J.; Roberts, P.T.

1989-07-01

Coal that was finely ground to a mean particle size of 12 /mu/m produced a hotter, shorter flame compared to normal pulverized fuel in a pilot scale combustor. Measurements indicated that, should this fuel be fired in an industrial boiler, the rate of ash deposition on the walls and convection tubes could be low, but that the thin ash deposits that were produced might be more highly insulating and would therefore require more frequent cleaning. A mathematical model, using reactivity and pyrolysis data measured in laboratory-scale apparatus, has been used to predict the heat release rate within a boiler. Thismore » would be sufficiently high to allow a premium-quality finely ground coal to be burned in many boilers originally designed for oil firing, provided that burner mixing patterns were optimized.« less

The Impact of Granule Density on Tabletting and Pharmaceutical Product Performance.

PubMed

van den Ban, Sander; Goodwin, Daniel J

2017-05-01

The impact of granule densification in high-shear wet granulation on tabletting and product performance was investigated, at pharmaceutical production scale. Product performance criteria need to be balanced with the need to deliver manufacturability criteria to assure robust industrial scale tablet manufacturing processes. A Quality by Design approach was used to determine in-process control specifications for tabletting, propose a design space for disintegration and dissolution, and to understand the permitted operating limits and required controls for an industrial tabletting process. Granules of varying density (filling density) were made by varying water amount added, spray rate, and wet massing time in a design of experiment (DoE) approach. Granules were compressed into tablets to a range of thicknesses to obtain tablets of varying breaking force. Disintegration and dissolution performance was evaluated for the tablets made. The impact of granule filling density on tabletting was rationalised with compressibility, tabletability and compactibility. Tabletting and product performance criteria provided competing requirements for porosity. An increase in granule filling density impacted tabletability and compactability and limited the ability to achieve tablets of adequate mechanical strength. An increase in tablet solid fraction (decreased porosity) impacted disintegration and dissolution. An attribute-based design space for disintegration and dissolution was specified to achieve both product performance and manufacturability. The method of granulation and resulting granule filling density is a key design consideration to achieve both product performance and manufacturability required for modern industrial scale pharmaceutical product manufacture and distribution.

Simulating Bubble Plumes from Breaking Waves with a Forced-Air Venturi

NASA Astrophysics Data System (ADS)

Long, M. S.; Keene, W. C.; Maben, J. R.; Chang, R. Y. W.; Duplessis, P.; Kieber, D. J.; Beaupre, S. R.; Frossard, A. A.; Kinsey, J. D.; Zhu, Y.; Lu, X.; Bisgrove, J.

2017-12-01

It has been hypothesized that the size distribution of bubbles in subsurface seawater is a major factor that modulates the corresponding size distribution of primary marine aerosol (PMA) generated when those bubbles burst at the air-water interface. A primary physical control of the bubble size distribution produced by wave breaking is the associated turbulence that disintegrates larger bubbles into smaller ones. This leads to two characteristic features of bubble size distributions: (1) the Hinze scale which reflects a bubble size above which disintegration is possible based on turbulence intensity and (2) the slopes of log-linear regressions of the size distribution on either side of the Hinze scale that indicate the state of plume evolution or age. A Venturi with tunable seawater and forced air flow rates was designed and deployed in an artificial PMA generator to produce bubble plumes representative of breaking waves. This approach provides direct control of turbulence intensity and, thus, the resulting bubble size distribution characterizable by observations of the Hinze scale and the simulated plume age over a range of known air detrainment rates. Evaluation of performance in different seawater types over the western North Atlantic demonstrated that the Venturi produced bubble plumes with parameter values that bracket the range of those observed in laboratory and field experiments. Specifically, the seawater flow rate modulated the value of the Hinze scale while the forced-air flow rate modulated the plume age parameters. Results indicate that the size distribution of sub-surface bubbles within the generator did not significantly modulate the corresponding number size distribution of PMA produced via bubble bursting.

Analysis of large-scale tablet coating: Modeling, simulation and experiments.

PubMed

Boehling, P; Toschkoff, G; Knop, K; Kleinebudde, P; Just, S; Funke, A; Rehbaum, H; Khinast, J G

2016-07-30

This work concerns a tablet coating process in an industrial-scale drum coater. We set up a full-scale Design of Simulation Experiment (DoSE) using the Discrete Element Method (DEM) to investigate the influence of various process parameters (the spray rate, the number of nozzles, the rotation rate and the drum load) on the coefficient of inter-tablet coating variation (cv,inter). The coater was filled with up to 290kg of material, which is equivalent to 1,028,369 tablets. To mimic the tablet shape, the glued sphere approach was followed, and each modeled tablet consisted of eight spheres. We simulated the process via the eXtended Particle System (XPS), proving that it is possible to accurately simulate the tablet coating process on the industrial scale. The process time required to reach a uniform tablet coating was extrapolated based on the simulated data and was in good agreement with experimental results. The results are provided at various levels of details, from thorough investigation of the influence that the process parameters have on the cv,inter and the amount of tablets that visit the spray zone during the simulated 90s to the velocity in the spray zone and the spray and bed cycle time. It was found that increasing the number of nozzles and decreasing the spray rate had the highest influence on the cv,inter. Although increasing the drum load and the rotation rate increased the tablet velocity, it did not have a relevant influence on the cv,inter and the process time. Copyright © 2015 Elsevier B.V. All rights reserved.

Oxygen Transfer in Moving Bed Biofilm Reactor and Integrated Fixed Film Activated Sludge Processes.

PubMed

2017-11-17

A demonstrated approach to design the, so-called, medium-bubble air diffusion network for oxygen transfer into the aerobic zone(s) of moving bed biofilm reactor (MBBR) and integrated fixed-film activated sludge (IFAS) processes is described in this paper. Operational full-scale biological water resource recovery systems treating municipal sewerage demonstrate that medium-bubble air diffusion networks designed using the method presented here provide reliable service. Further improvement is possible, however, as knowledge gaps prevent more rational process designs. Filling such knowledge gaps can potentially result in higher performing and more economical systems. Small-scale system testing demonstrates significant enhancement of oxygen transfer capacity due to the presence of media, but quantification of such effects in full-scale systems is lacking, and is needed. Establishment of the relationship between diffuser submergence, aeration rate, and biofilm carrier fill fraction will enhance MBBR and IFAS aerobic process design, cost, and performance. Limited testing of full-scale systems is available to allow computation of alpha valuess. As with clean water testing of full-scale systems, further full-scale testing under actual operating conditions is required to more fully quantify MBBR and IFAS system oxygen transfer performance under a wide range of operating conditions. Control of MBBR and IFAS aerobic zone oxygen transfer systems can be optimized by recognizing that varying residual dissolved oxygen (DO) concentrations are needed, depending on operating conditions. For example, the DO concentration in the aerobic zone of nitrifying IFAS processes can be lowered during warm weather conditions when greater suspended growth nitrification can occur, resulting in the need for reduced nitrification by the biofilm compartment. Further application of oxygen transfer control approaches used in activated sludge systems to MBBR and IFAS systems, such as ammonia-based oxygen transfer system control, has been demonstrated to further improve MBBR and IFAS system energy-efficiency.

Faces scales for the measurement of postoperative pain intensity in children following minor surgery.

PubMed

Chambers, Christine T; Hardial, Janine; Craig, Kenneth D; Court, Colleen; Montgomery, Carolyne

2005-01-01

Faces scales are commonly used to obtain self-reports of pain intensity from children. Previous research using hypothetical vignettes and pain following venepuncture has found differences in children's pain ratings as a function of the type of faces scale used. The purpose of the present study was to determine whether scales beginning with a smiling rather than neutral "no pain" face would produce higher ratings in the assessment of postoperative pain intensity in children and to compare ratings using different faces scales to those reported with an additional independent measure of pain intensity. Participants were 78 children between the ages of 5 and 13 years undergoing surgery, one of their parents, and their postoperative care nurse. Following surgery, children were asked to provide a rating of their current pain intensity using a set of 5 successively administered faces scales and the Colored Analog Scale (CAS). Parents and nurses provided independent ratings using the same measures. Results showed that parents and nurses rated significantly more pain when using scales with a smiling rather than a neutral "no pain" face. This pattern was not as clear for the children's ratings, although their highest ratings were provided when using a smiling "no pain" faces scale. Children's and nurses' ratings on the CAS were generally more similar to their ratings using scales with neutral "no pain" faces, whereas parents' CAS ratings tended to fall in between ratings provided on the smiling and neutral "no pain" faces scales. Scale preference, age and sex differences in pain ratings, and child-parent-nurse agreement in pain ratings are also examined. Children's and parents' ratings of postoperative pain intensity are influenced by the presence of a smiling "no pain" face at the beginning of faces scales, with such scales producing significantly higher ratings than scales with neutral "no pain" faces. Ratings on the independent CAS measure were more comparable to those provided on faces scales with neutral "no pain" faces. Nurses are also susceptible to the influencing effect of a smiling face at the beginning of a faces scale.

Analytical model for the design of in situ horizontal permeable reactive barriers (HPRBs) for the mitigation of chlorinated solvent vapors in the unsaturated zone

NASA Astrophysics Data System (ADS)

Verginelli, Iason; Capobianco, Oriana; Hartog, Niels; Baciocchi, Renato

2017-02-01

In this work we introduce a 1-D analytical solution that can be used for the design of horizontal permeable reactive barriers (HPRBs) as a vapor mitigation system at sites contaminated by chlorinated solvents. The developed model incorporates a transient diffusion-dominated transport with a second-order reaction rate constant. Furthermore, the model accounts for the HPRB lifetime as a function of the oxidant consumption by reaction with upward vapors and its progressive dissolution and leaching by infiltrating water. Simulation results by this new model closely replicate previous lab-scale tests carried out on trichloroethylene (TCE) using a HPRB containing a mixture of potassium permanganate, water and sand. In view of field applications, design criteria, in terms of the minimum HPRB thickness required to attenuate vapors at acceptable risk-based levels and the expected HPRB lifetime, are determined from site-specific conditions such as vapor source concentration, water infiltration rate and HPRB mixture. The results clearly show the field-scale feasibility of this alternative vapor mitigation system for the treatment of chlorinated solvents. Depending on the oxidation kinetic of the target contaminant, a 1 m thick HPRB can ensure an attenuation of vapor concentrations of orders of magnitude up to 20 years, even for vapor source concentrations up to 10 g/m3. A demonstrative application for representative contaminated site conditions also shows the feasibility of this mitigation system from an economical point of view with capital costs potentially somewhat lower than those of other remediation options, such as soil vapor extraction systems. Overall, based on the experimental and theoretical evaluation thus far, field-scale tests are warranted to verify the potential and cost-effectiveness of HPRBs for vapor mitigation control under various conditions of application.

Colorectal cancer patients' attitudes towards involvement in decision making.

PubMed

Beaver, Kinta; Campbell, Malcolm; Craven, Olive; Jones, David; Luker, Karen A; Susnerwala, Shabbir S

2009-03-01

To design and administer an attitude rating scale, exploring colorectal cancer patients' views of involvement in decision making. To examine the impact of socio-demographic and/or treatment-related factors on decision making. To conduct principal components analysis to determine if the scale could be simplified into a number of factors for future clinical utility. An attitude rating scale was constructed based on previous qualitative work and administered to colorectal cancer patients using a cross-sectional survey approach. 375 questionnaires were returned (81.7% response). For patients it was important to be informed and involved in the decision-making process. Information was not always used to make decisions as patients placed their trust in medical expertise. Women had more positive opinions on decision making and were more likely to want to make decisions. Written information was understood to a greater degree than verbal information. The scale could be simplified to a number of factors, indicating clinical utility. Few studies have explored the attitudes of colorectal cancer patients towards involvement in decision making. This study presents new insights into how patients view the concept of participation; important when considering current policy imperatives in the UK of involving service users in all aspects of care and treatment.

Development and validation of the Spanish-English Language Proficiency Scale (SELPS).

PubMed

Smyk, Ekaterina; Restrepo, M Adelaida; Gorin, Joanna S; Gray, Shelley

2013-07-01

This study examined the development and validation of a criterion-referenced Spanish-English Language Proficiency Scale (SELPS) that was designed to assess the oral language skills of sequential bilingual children ages 4-8. This article reports results for the English proficiency portion of the scale. The SELPS assesses syntactic complexity, grammatical accuracy, verbal fluency, and lexical diversity based on 2 story retell tasks. In Study 1, 40 children were given 2 story retell tasks to evaluate the reliability of parallel forms. In Study 2, 76 children participated in the validation of the scale against language sample measures and teacher ratings of language proficiency. Study 1 indicated no significant differences between the SELPS scores on the 2 stories. Study 2 indicated that the SELPS scores correlated significantly with their counterpart language sample measures. Correlations between the SELPS and teacher ratings were moderate. The 2 story retells elicited comparable SELPS scores, providing a valuable tool for test-retest conditions in the assessment of language proficiency. Correlations between the SELPS scores and external variables indicated that these measures assessed the same language skills. Results provided empirical evidence regarding the validity of inferences about language proficiency based on the SELPS score.

Suicidal behaviour of Indian patients with obsessive compulsive disorder.

PubMed

Dhyani, Mohan; Trivedi, Jitendra Kumar; Nischal, Anil; Sinha, Pramod Kumar; Verma, Subham

2013-04-01

The chronicity, distress, high rates of comorbidity and varying degree of non response to treatment in Obsessive Compulsive Disorder (OCD) may contribute to suicidal behavior. There is relatively little information on suicidal behavior in OCD subjects. Our study design is Single point non-invasive, cross sectional, clinical study of new and follow up cases. Assessment of Suicidal Behavior in patients of OCD attending the adult Psychiatry O.P.D. of Chatrapati Shahuji Maharaj Medical University (CSMMU) U.P. Lucknow using (DSM-IV) criteria for diagnosis of Obsessive Compulsive Disorder, Structured Clinical Interview for DSM-IV Axis-I disorders, Yale Brown Obsessive Compulsive Rating Scale, Scale for Suicidal Ideation (SSI), Beck's Hopelessness Scale (BHS). Mean standard deviation and t test for independent samples, Pearson's correlation coefficient. Statistically significant differences were seen in the SSI score between the "Clinical" and "Sub-Clinical" cases with Clinical group having higher scores. Value of correlation coefficient between YBOCS score and SSI and BHS score is positive and statistically significant (P<0.01). "Clinical" group of patients had significantly higher scores of suicidal ideation measured by Scale of Suicidal Ideation (SSI). There was a significantly positive correlation between disease severity (YBOCS Score) and degree of suicidal ideation (SIS Score).

Basic Competence of Intensive Care Unit Nurses: Cross-Sectional Survey Study

PubMed Central

Lakanmaa, Riitta-Liisa; Suominen, Tarja; Ritmala-Castrén, Marita; Vahlberg, Tero; Leino-Kilpi, Helena

2015-01-01

Critical care patients benefit from the attention of nursing personnel with a high competence level. The aim of the study was to describe and evaluate the self-assessed basic competence of intensive care unit nurses and related factors. A cross-sectional survey design was used. A basic competence scale (Intensive and Critical Care Nursing Competence Scale version 1, Likert scale 1–5, 1 = poor and 5 = excellent) was employed among Finnish intensive care unit nurses (n = 431). Intensive care unit nurses' self-assessed basic competence was good (mean 4.19, SD 0.40). The attitude and value base of basic competence was excellent whereas experience base was the poorest compared to the knowledge base and skill base of intensive and critical care nursing. The strongest factor explaining nurses' basic competence was their experience of autonomy in nursing care (F value 60.85, β 0.11, SE 0.01, and P ≤ 0.0001). Clinical competence was self-rated as good. Nurses gave their highest competence self-ratings for ICU patient care according to the principles of nursing care. The ICU nurses also self-rated their professional competence as good. Collaboration was self-rated as the best competence. In basic and continuing education and professional self-development discussions it is meaningful to consider and find solutions for how to improve nurses' experienced autonomy in nursing. PMID:26557676

In situ redox manipulation of subsurface sediments from Fort Lewis, Washington: Iron reduction and TCE dechlorination mechanisms

DOE Office of Scientific and Technical Information (OSTI.GOV)

JE Szecsody; JS Fruchter; DS Sklarew

2000-03-21

Pacific Northwest National Laboratory (PNNL) conducted a bench-scale study to determine how effective chemically treated Ft. Lewis sediments can degrade trichloroethylene (TCE). The objectives of this experimental study were to quantify: (1) sediment reduction and oxidation reactions, (2) TCE degradation reactions, and (3) other significant geochemical changes that occurred. Sediment reduction and oxidation were investigated to determine the mass of reducible iron in the Ft. Lewis sediments and the rate of this reduction and subsequent oxidation at different temperatures. The temperature dependence was needed to be able to predict field-scale reduction in the relatively cold ({approximately}11 C) Ft. Lewis aquifer.more » Results of these experiments were used in conjunction with other geochemical and hydraulic characterization to design the field-scale injection experiment and predict barrier longevity. For example, the sediment reduction rate controls the amount of time required for the dithionite solution to fully react with sediments. Sediment oxidation experiments were additionally conducted to determine the oxidation rate and provide a separate measure of the mass of reduced iron. Laboratory experiments that were used to meet these objectives included: (1) sediment reduction in batch (static) systems, (2) sediment reduction in 1-D columns, and (3) sediment oxidation in 1-D columns. Multiple reaction modeling was conducted to quantify the reactant masses and reaction rates.« less

Combinations of Earth Orientation Observations: SPACE94, COMB94, and POLE94

NASA Technical Reports Server (NTRS)

Gross, R. S.

1995-01-01

A Kalman filter has been used to combine all publicly available, independently determined measurements of the Earth's orientation taken by the modern, space-geodetic techniques of very long baseline interferometry, satellite laser ranging, lunar laser ranging, and the global positioning system. Prior to combining the data, tidal terms were removed from the UT1 measurements, outlying data points were deleted, series-specific corrections were applied for bias and rate, and the stated uncertainties of the measurements were adjusted by multiplying them by series-specific scale factors. Values for these bias- rate corrections and uncertainty scale factors were determined by an iterative, round-robin procedure wherein each data set is compared, in turn, to a combination of all other data sets. When applied to the measurements, the bias-rate corrections thus determined make the data sets agree with each other in bias and rate, and the uncertainty scale factors thus determined make the residual of each series (when differenced with a combination of all others) have a reduced chi-square of one. The corrected and adjusted series are then placed within an IERS reference frame by aligning them with the IERS Earth orientation series EOP (IERS)90C04. The result of combining these corrected, adjusted and aligned series is designated SPCE94 and spans October 6.0, 1976 to January 27.0, 1995 at daily intervals.

A Conceptual Design For A Spaceborne 3D Imaging Lidar

NASA Technical Reports Server (NTRS)

Degnan, John J.; Smith, David E. (Technical Monitor)

2002-01-01

First generation spaceborne altimetric approaches are not well-suited to generating the few meter level horizontal resolution and decimeter accuracy vertical (range) resolution on the global scale desired by many in the Earth and planetary science communities. The present paper discusses the major technological impediments to achieving few meter transverse resolutions globally using conventional approaches and offers a feasible conceptual design which utilizes modest power kHz rate lasers, array detectors, photon-counting multi-channel timing receivers, and dual wedge optical scanners with transmitter point-ahead correction.

Qualities of Single Electrode Stimulation as a Function of Rate and Place of Stimulation with a Cochlear Implant

PubMed Central

Landsberger, David M.; Vermeire, Katrien; Claes, Annes; Van Rompaey, Vincent; Van de Heyning, Paul

2015-01-01

Objectives Although it has been previously shown that changes in temporal coding produce changes in pitch in all cochlear regions, research has suggested that temporal coding might be best encoded in relatively apical locations. We hypothesized that although temporal coding may provide useable information at any cochlear location, low rates of stimulation might provide better sound quality in apical regions that are more likely to encode temporal information in the normal ear. In the present study, sound qualities of single electrode pulse trains were scaled to provide insight into the combined effects of cochlear location and stimulation rate on sound quality. Design Ten long term users of MED-EL cochlear implants with 31 mm electrode arrays (Standard or FLEXSOFT) were asked to scale the sound quality of single electrode pulse trains in terms of how “Clean”, “Noisy”, “High”, and “Annoying” they sounded. Pulse trains were presented on most electrodes between 1 and 12 representing the entire range of the long electrode array at stimulation rates of 100, 150, 200, 400, or 1500 pulses per second. Results While high rates of stimulation are scaled as having a “Clean” sound quality across the entire array, only the most apical electrodes (typically 1 through 3) were considered “Clean” at low rates. Low rates on electrodes 6 through 12 were not rated as “Clean” while the low rate quality of electrodes 4 and 5 were typically in between. Scaling of “Noisy” responses provided an approximately inverse pattern as “Clean” responses. “High” responses show the trade-off between rate and place of stimulation on pitch. Because “High” responses did not correlate with “Clean” responses, subjects were not rating sound quality based on pitch. Conclusions If explicit temporal coding is to be provided in a cochlear implant, it is likely to sound better when provided apically. Additionally, the finding that low rates sound clean only at apical places of stimulation is consistent with previous findings that a change in rate of stimulation corresponds to an equivalent change in perceived pitch at apical locations. Collectively, the data strongly suggests that temporal coding with a cochlear implant is optimally provided by electrodes placed well into the second cochlear turn. PMID:26583480

Rain Basin Design Implications for Soil Microbial Activity and N-mineralization in a Semi-arid Environment

NASA Astrophysics Data System (ADS)

Stern, C.; Pavao-Zuckerman, M.

2014-12-01

Rain basins have been an increasingly popular Green Infrastructure (GI) solution to the redistribution of water flow caused by urbanization. This study was conducted to examine how different approaches to basin design, specifically mulching (gravel vs. compost and gravel), influence the water availability of rain basins and the effects this has on the soil microbial activity of the basins. Soil microbes are a driving force of biogeochemical process and may impact the carbon and nitrogen dynamics of rain basin GI. In this study we sampled 12 different residential-scale rain basins, differing in design established at Biosphere 2, Arizona in 2013. Soil samples and measurements were collected before and after the onset of the monsoon season in 2014 to determine how the design of basins mediates the transition from dry to wet conditions. Soil abiotic factors were measured, such as moisture content, soil organic matter (SOM) content, texture and pH, and were related to the microbial biomass size within the basins. Field and lab potential N-mineralization and soil respiration were measured to determine how basin design influences microbial activity and N dynamics. We found that pre-monsoon basins with compost had higher moisture contents and that there was a positive correlation between the moisture content and the soil microbial biomass size of the basins. Pre-monsoon data also suggests that N-mineralization rates for basins with compost were higher than those with only gravel. These design influences on basin-scale biogeochemical dynamics and nitrogen retention may have important implications for urban biogeochemistry at neighborhood and watershed scales.

Photovoltaic balance-of-system designs and costs at PVUSA

NASA Astrophysics Data System (ADS)

Reyes, A. B.; Jennings, C.

1995-05-01

This report is one in a series of 1994-1995 PVUSA reports that document PVUSA lessons learned at demonstration sites in California and Texas. During the last 7 years (1988 to 1994), 16 PV systems ranging from 20 kW to 500 kW have been installed. Six 20-kW emerging module technology (EMT) arrays and three turnkey (i.e., vendor designed and integrated) utility-scale systems were procured and installed at PVUSA's main test site in Davis, California. PVUSA host utilities have installed a total of seven EMT arrays and utility-scale systems in their service areas. Additional systems at Davis and host utility sites are planned. One of PVUSA's key objectives is to evaluate the performance, reliability, and cost of PV balance-of-system (BOS). In the procurement stage PVUSA encouraged innovative design to improve upon present practice by reducing maintenance, improving reliability, or lowering manufacturing or construction costs. The project team worked closely with suppliers during the design stage not only to ensure designs met functional and safety specifications, but to provide suggestions for improvement. This report, intended for the photovoltaic (PV) industry and for utility project managers and engineers considering PV plant construction and ownership, documents PVUSA utility-scale system design and cost lessons learned. Complementary PVUSA topical reports document: construction and safety experience; five-year assessment of EMTs; validation of the Kerman 500-kW grid-support PV plant benefits; PVUSA instrumentation and data analysis techniques; procurement, acceptance, and rating practices for PV power plants; experience with power conditioning units and power quality.

Computational analysis of fluid dynamics in pharmaceutical freeze-drying.

PubMed

Alexeenko, Alina A; Ganguly, Arnab; Nail, Steven L

2009-09-01

Analysis of water vapor flows encountered in pharmaceutical freeze-drying systems, laboratory-scale and industrial, is presented based on the computational fluid dynamics (CFD) techniques. The flows under continuum gas conditions are analyzed using the solution of the Navier-Stokes equations whereas the rarefied flow solutions are obtained by the direct simulation Monte Carlo (DSMC) method for the Boltzmann equation. Examples of application of CFD techniques to laboratory-scale and industrial scale freeze-drying processes are discussed with an emphasis on the utility of CFD for improvement of design and experimental characterization of pharmaceutical freeze-drying hardware and processes. The current article presents a two-dimensional simulation of a laboratory scale dryer with an emphasis on the importance of drying conditions and hardware design on process control and a three-dimensional simulation of an industrial dryer containing a comparison of the obtained results with analytical viscous flow solutions. It was found that the presence of clean in place (CIP)/sterilize in place (SIP) piping in the duct lead to significant changes in the flow field characteristics. The simulation results for vapor flow rates in an industrial freeze-dryer have been compared to tunable diode laser absorption spectroscopy (TDLAS) and gravimetric measurements.

Dimensionality and construct validity of an instrument designed to measure the metacognitive orientation of science classroom learning environments.

PubMed

Thomas, Gregory P

2004-01-01

The purpose of this study was to establish the factorial construct validity and dimensionality of the Metacognitive Orientation Learning Environment Scale-Science (MOLES-S) which was designed to measure the metacognitive orientation of science classroom learning environments. The metacognitive orientation of a science classroom learning environment is the extent to which psychosocial conditions that are known to enhance students' metacognition are evident within that classroom. The development of items comprising this scale was based on a theoretical understanding of metacognition, learning environments and the development of previous learning environments instruments. Four possible hypothesized structure models, each consistent with the literature, were reviewed and their merits were compared on the basis of empirical data drawn from two populations of 1026 and 1223 Hong Kong secondary school students using confirmatory factor analysis procedures. The scale was calibrated using the Rasch rating scale model using data from the 1223 student sample. The results suggest that there is strong evidence to support the factorial construct validity of the MOLES-S but that, on the basis of the Rasch analysis, there are still suggestions for further refinement and improvement of the MOLES-S.

Designing Real-time Decision Support for Trauma Resuscitations

PubMed Central

Yadav, Kabir; Chamberlain, James M.; Lewis, Vicki R.; Abts, Natalie; Chawla, Shawn; Hernandez, Angie; Johnson, Justin; Tuveson, Genevieve; Burd, Randall S.

2016-01-01

Background Use of electronic clinical decision support (eCDS) has been recommended to improve implementation of clinical decision rules. Many eCDS tools, however, are designed and implemented without taking into account the context in which clinical work is performed. Implementation of the pediatric traumatic brain injury (TBI) clinical decision rule at one Level I pediatric emergency department includes an electronic questionnaire triggered when ordering a head computed tomography using computerized physician order entry (CPOE). Providers use this CPOE tool in less than 20% of trauma resuscitation cases. A human factors engineering approach could identify the implementation barriers that are limiting the use of this tool. Objectives The objective was to design a pediatric TBI eCDS tool for trauma resuscitation using a human factors approach. The hypothesis was that clinical experts will rate a usability-enhanced eCDS tool better than the existing CPOE tool for user interface design and suitability for clinical use. Methods This mixed-methods study followed usability evaluation principles. Pediatric emergency physicians were surveyed to identify barriers to using the existing eCDS tool. Using standard trauma resuscitation protocols, a hierarchical task analysis of pediatric TBI evaluation was developed. Five clinical experts, all board-certified pediatric emergency medicine faculty members, then iteratively modified the hierarchical task analysis until reaching consensus. The software team developed a prototype eCDS display using the hierarchical task analysis. Three human factors engineers provided feedback on the prototype through a heuristic evaluation, and the software team refined the eCDS tool using a rapid prototyping process. The eCDS tool then underwent iterative usability evaluations by the five clinical experts using video review of 50 trauma resuscitation cases. A final eCDS tool was created based on their feedback, with content analysis of the evaluations performed to ensure all concerns were identified and addressed. Results Among 26 EPs (76% response rate), the main barriers to using the existing tool were that the information displayed is redundant and does not fit clinical workflow. After the prototype eCDS tool was developed based on the trauma resuscitation hierarchical task analysis, the human factors engineers rated it to be better than the CPOE tool for nine of 10 standard user interface design heuristics on a three-point scale. The eCDS tool was also rated better for clinical use on the same scale, in 84% of 50 expert–video pairs, and was rated equivalent in the remainder. Clinical experts also rated barriers to use of the eCDS tool as being low. Conclusions An eCDS tool for diagnostic imaging designed using human factors engineering methods has improved perceived usability among pediatric emergency physicians. PMID:26300010

Improved design of anaerobic digesters for household biogas production in indonesia: one cow, one digester, and one hour of cooking per day.

PubMed

Usack, Joseph G; Wiratni, Wiratni; Angenent, Largus T

2014-01-01

A government-sponsored initiative in Indonesia to design and implement low-cost anaerobic digestion systems resulted in 21 full-scale systems with the aim to satisfy the cooking fuel demands of rural households owning at least one cow. The full-scale design consisted of a 0.3 m diameter PVC pipe, which was operated as a conventional plug-flow system. The system generated enough methane to power a cooking stove for ∼ 1 h. However, eventual clogging from solids accumulation inside the bioreactor proved to be a major drawback. Here, we improved the digester configuration to remedy clogging while maintaining system performance. Controlled experiments were performed using four 9-L laboratory-scale digesters operated at a temperature of 27 ± 1 °C, a volatile solids loading rate of 2.0 g VS · L(-1) · day(-1), and a 21-day hydraulic retention time. Two of the digesters were replicates of the original design (control digesters), while the other two digesters included internal mixing or effluent recycle (experimental digesters). The performance of each digester was compared based on methane yields, VS removal efficiencies, and steady-state solids concentrations during an operating period of 311 days. Statistical analyses revealed that internal mixing and effluent recycling resulted in reduced solids accumulation compared to the controls without diminishing methane yields or solids removal efficiencies.

Toward a physics-based rate and state friction law for earthquake nucleation processes in fault zones with granular gouge

NASA Astrophysics Data System (ADS)

Ferdowsi, B.; Rubin, A. M.

2017-12-01

Numerical simulations of earthquake nucleation rely on constitutive rate and state evolution laws to model earthquake initiation and propagation processes. The response of different state evolution laws to large velocity increases is an important feature of these constitutive relations that can significantly change the style of earthquake nucleation in numerical models. However, currently there is not a rigorous understanding of the physical origins of the response of bare rock or gouge-filled fault zones to large velocity increases. This in turn hinders our ability to design physics-based friction laws that can appropriately describe those responses. We here argue that most fault zones form a granular gouge after an initial shearing phase and that it is the behavior of the gouge layer that controls the fault friction. We perform numerical experiments of a confined sheared granular gouge under a range of confining stresses and driving velocities relevant to fault zones and apply 1-3 order of magnitude velocity steps to explore dynamical behavior of the system from grain- to macro-scales. We compare our numerical observations with experimental data from biaxial double-direct-shear fault gouge experiments under equivalent loading and driving conditions. Our intention is to first investigate the degree to which these numerical experiments, with Hertzian normal and Coulomb friction laws at the grain-grain contact scale and without any time-dependent plasticity, can reproduce experimental fault gouge behavior. We next compare the behavior observed in numerical experiments with predictions of the Dieterich (Aging) and Ruina (Slip) friction laws. Finally, the numerical observations at the grain and meso-scales will be used for designing a rate and state evolution law that takes into account recent advances in rheology of granular systems, including local and non-local effects, for a wide range of shear rates and slow and fast deformation regimes of the fault gouge.

Computational Modeling in Plasma Processing for 300 mm Wafers

NASA Technical Reports Server (NTRS)

Meyyappan, Meyya; Arnold, James O. (Technical Monitor)

1997-01-01

Migration toward 300 mm wafer size has been initiated recently due to process economics and to meet future demands for integrated circuits. A major issue facing the semiconductor community at this juncture is development of suitable processing equipment, for example, plasma processing reactors that can accomodate 300 mm wafers. In this Invited Talk, scaling of reactors will be discussed with the aid of computational fluid dynamics results. We have undertaken reactor simulations using CFD with reactor geometry, pressure, and precursor flow rates as parameters in a systematic investigation. These simulations provide guidelines for scaling up in reactor design.

Photocatalytic destruction of chlorinated solvents with solar energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pacheco, J.; Prairie, M.; Yellowhorse, L.

1990-01-01

Sandia National Laboratories and the Solar Energy Research Institute are developing a photocatalytic process to destroy organic contaminants in water. Tests with common water pollutants are being conducted at Sandia's Solar Thermal Test Facility using a near commercial-scale single-axis tracking parabolic trough system with glass pipe mounted at its focus. Experiments at this scale provide verification of laboratory studies and allow examination of design and operation issues at a real-life scale. The catalyst, titanium dioxide (TiO{sub 2}), is a harmless material found in paint, cosmetics and toothpaste. Experiments were conducted to determine the effect of key process parameters on destructionmore » rates of two chlorinated organic compounds which are common water pollutants: trichloroethylene and trichloroethane. In this paper, we summarize the engineering-scale results of these experiments and analyses. 21 refs., 8 figs.« less

Design and Analysis of Windmill Simulation and Pole by Solidwork Program

NASA Astrophysics Data System (ADS)

Mulyana, Tatang; Sebayang, Darwin; R, Akmal Muamar. D.; A, Jauharah H. D.; Yahya Shomit, M.

2018-03-01

The Indonesian state of archipelago has great wind energy potential. For micro-scale power generation, the energy obtained from the windmill can be connected directly to the electrical load and can be used without problems. However, for macro-scale power generation, problems will arise such as the design of vane shapes, there should be a simulation and an accurate experiment to produce blades with a special shape that can capture wind energy. In addition, daily and yearly wind and wind rate calculations are also required to ensure the best latitude and longitude positions for building windmills. This paper presents a solution to solve the problem of how to produce a windmill which in the builder is very practical and very mobile can be moved its location. Before a windmill prototype is built it should have obtained the best windmill design result. Therefore, the simulation of the designed windmill is of crucial importance. Solid simulation express is a tool that serves to generate simulation of a design. Some factors that can affect a design result include the power part and the rest part of the part, material selection, the load is given, the security of the design power made, and changes in shape due to treat the load given to the design made. In this paper, static and thermal simulations of windmills have been designed. Based on the simulation result on the designed windmill, it shows that the design has been made very satisfactory so that it can be done prototyping fabrication process.

An automated laboratory-scale methodology for the generation of sheared mammalian cell culture samples.

PubMed

Joseph, Adrian; Goldrick, Stephen; Mollet, Michael; Turner, Richard; Bender, Jean; Gruber, David; Farid, Suzanne S; Titchener-Hooker, Nigel

2017-05-01

Continuous disk-stack centrifugation is typically used for the removal of cells and cellular debris from mammalian cell culture broths at manufacturing-scale. The use of scale-down methods to characterise disk-stack centrifugation performance enables substantial reductions in material requirements and allows a much wider design space to be tested than is currently possible at pilot-scale. The process of scaling down centrifugation has historically been challenging due to the difficulties in mimicking the Energy Dissipation Rates (EDRs) in typical machines. This paper describes an alternative and easy-to-assemble automated capillary-based methodology to generate levels of EDRs consistent with those found in a continuous disk-stack centrifuge. Variations in EDR were achieved through changes in capillary internal diameter and the flow rate of operation through the capillary. The EDRs found to match the levels of shear in the feed zone of a pilot-scale centrifuge using the experimental method developed in this paper (2.4×10 5 W/Kg) are consistent with those obtained through previously published computational fluid dynamic (CFD) studies (2.0×10 5 W/Kg). Furthermore, this methodology can be incorporated into existing scale-down methods to model the process performance of continuous disk-stack centrifuges. This was demonstrated through the characterisation of culture hold time, culture temperature and EDRs on centrate quality. © 2017 The Authors. Biotechnology Journal published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Hardware accelerator design for change detection in smart camera

NASA Astrophysics Data System (ADS)

Singh, Sanjay; Dunga, Srinivasa Murali; Saini, Ravi; Mandal, A. S.; Shekhar, Chandra; Chaudhury, Santanu; Vohra, Anil

2011-10-01

Smart Cameras are important components in Human Computer Interaction. In any remote surveillance scenario, smart cameras have to take intelligent decisions to select frames of significant changes to minimize communication and processing overhead. Among many of the algorithms for change detection, one based on clustering based scheme was proposed for smart camera systems. However, such an algorithm could achieve low frame rate far from real-time requirements on a general purpose processors (like PowerPC) available on FPGAs. This paper proposes the hardware accelerator capable of detecting real time changes in a scene, which uses clustering based change detection scheme. The system is designed and simulated using VHDL and implemented on Xilinx XUP Virtex-IIPro FPGA board. Resulted frame rate is 30 frames per second for QVGA resolution in gray scale.

DiPOLE: a scalable laser architecture for pumping multi-Hz PW systems

NASA Astrophysics Data System (ADS)

Ertel, Klaus; Banerjee, Saumyabrata; Mason, Paul D.; Phillips, P. Jonathan; Greenhalgh, R. Justin S.; Hernandez-Gomez, Cristina; Collier, John L.

2013-05-01

DiPOLE is a concept for a large aperture gas-cooled cryogenic multislab DPSSL amplifier based on ceramic Yb:YAG. It is designed to amplify ns-pulses at multi-Hz repetition rates and is scalable up the kJ-level. The concept was first tested on a small scale prototype which has so far produced 7.4 J at 10 Hz, with the aim of reaching 10 J at an optical-to-optical efficiency of 25 %. The design of an additional amplifier stage producing 100 J at 10 Hz is underway. When used to pump short-pulse Ti:S or OPCPA systems, PW peak power levels can be produced at repetition rates and efficiencies that lie orders of magnitude above what is achievable today.

Effect of freeze-dryer design on drying rate of an amorphous protein-formulation determined with a gravimetric technique.

PubMed

Gieseler, Henning; Lee, Geoffrey

2008-01-01

A freeze-drying balance was used to determine momentary drying-rate, m(t), of a sucrose/BSA formulation contained in a vial with varying shelf packing density, Ø2. A comparison between two different laboratory-scale freeze-dryers was made. The effects of Ø2 on m(t) differed between the two units, attributed to drying chamber design and its effects on heat transfer. At high Ø2 the differences are annulled because of the shielding effects of surrounding vials. Parallel effects of Ø2 were also found on product temperature, Tb, measured in the balance vial. Tb was used to calculate vial heat transfer coefficient, Kv. Kv was strongly reduced with increasing Ø2, but reached a plateau value at high Ø2.

Characterizing somatization, hypochondriasis, and hysteria in the borderline personality disorder.

PubMed

Snyder, S; Pitts, W M

1986-03-01

Somatization, hypochondriasis, and hysteria have often been considered as associated features of the borderline personality disorder. This study was designed to characterize these three syndromes in the borderline patient. Inpatients with DSM-III borderline personality disorder were compared with controls with dysthymic disorder. Scales and items from standardized rating instruments which measured the three syndromes were scored and compared between groups. Although the hysteria-obvious and hypochondriasis scales of the MMPI and the Hamilton Depression Scale item measuring hypochondriasis were elevated in the borderline group, there were no significant differences between groups. Scores of dysthymic patients significantly exceeded those of borderline patients on four of five MMPI codetypes measuring the three syndromes. Findings are discussed in light of previous psychodynamic, empirical, and research literature.

How Measurement Characteristics Can Affect ECERS-R Scores and Program Funding

ERIC Educational Resources Information Center

Hofer, Kerry G.

2010-01-01

This project involved examining the most widely used instrument designed to evaluate the quality of early learning environments, the Early Childhood Environment Rating Scale-Revised Edition (ECERS-R). There are many aspects related to the way that the ECERS-R is used in practice that can vary from one observation to the next. The method in which…

The Factor Structure of the BASC-2 Behavioral and Emotional Screening System Teacher Form, Child/Adolescent

ERIC Educational Resources Information Center

Dever, Bridget V.; Mays, Kristen L.; Kamphaus, Randy W.; Dowdy, Erin

2012-01-01

The BASC-2 Behavioral and Emotional Screening System Teacher, Child/Adolescent Form (BESS Teacher Form C/A; Kamphaus & Reynolds, 2007) is a brief teacher-report rating scale designed to identify students who are at-risk for behavioral and emotional problems. The aim of this study was to describe the latent dimensions that underlie the…

Andragogy and Workplace Relationships: A Mixed-Methods Study Exploring Employees' Perceptions of Their Relationships with Their Supervisors

ERIC Educational Resources Information Center

Klepper, Erin M.

2017-01-01

The purpose of this mixed-method study was to explore employees' perceptions of their relationships with their direct supervisor, and to determine why employees chose to remain at SSM Health. This study used a three-part research design comprised of quantitative Likert scale rating statements, Henschke's (2016) Modified Instructional Perspectives…

Skill Analysis as a Technique for Predicting Vocational Success of the Mentally Retarded.

ERIC Educational Resources Information Center

Human Resources Center, Albertson, NY.

This study was designed to develop a skill anaysis test battery which would aid in the prediction of achievement in two specific areas of training. A total of forty educable mentally retarded students in work study classes were selected for training. A three part rating scale specifically for this study was used as criterion meansure against the…

Test Review: F. M. Gresham & S. N. Elliott "Social Skills Improvement System Rating Scales." Minneapolis, Minnesota--NCS Pearson, 2008

ERIC Educational Resources Information Center

Crosby, James W.

2011-01-01

The "Social Skills Improvement System" (SSIS; Gresham & Elliot, 2008) is designed to assist in the screening and classification of students (ages 8 to 18) who are suspected of having significant social skills deficits, and to offer support in the development of interventions for those found to display significant social skills…

77 FR 75984 - Utility Scale Wind Towers From the Socialist Republic of Vietnam: Final Determination of Sales at...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-26

..., whether or not tapered, and sections thereof. Certain wind towers are designed to support the nacelle and rotor blades in a wind turbine with a minimum rated electrical power generation capacity in excess of... joined with nonsubject merchandise, such as nacelles or rotor blades, and whether or not they have...

78 FR 11150 - Utility Scale Wind Towers From the Socialist Republic of Vietnam: Amended Final Determination of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-15

..., whether or not tapered, and sections thereof. Certain wind towers are designed to support the nacelle and rotor blades in a wind turbine with a minimum rated electrical power generation capacity in excess of... part of a wind turbine (i.e., accompanying nacelles and/or rotor blades). Amendment to the Final...

The SWAN Captures Variance at the Negative and Positive Ends of the ADHD Symptom Dimension

ERIC Educational Resources Information Center

Arnett, Anne B.; Pennington, Bruce F.; Friend, Angela; Willcutt, Erik G.; Byrne, Brian; Samuelsson, Stefan; Olson, Richard K.

2013-01-01

Objective: The Strengths and Weaknesses of ADHD Symptoms and Normal Behavior (SWAN) Rating Scale differs from previous parent reports of ADHD in that it was designed to also measure variability at the positive end of the symptom spectrum. Method: The psychometric properties of the SWAN were tested and compared with an established measure of ADHD,…

Investigating Learning English Strategies and English Needs of Undergraduate Students at the National University of Laos

ERIC Educational Resources Information Center

Souriyavongsa, Thongma; Abidin, Mohamad Jafre Zainol; Sam, Rany; Mei, Leong Lai; Aloysius, Ithayaraj Britto

2013-01-01

This paper aims to investigate learning English strategies and the requirement of English needs of the undergraduate students at the National University of Laos (NUOL). The study employed a survey design which involved in administering questionnaires of rating scales, and adapting the items from (Barakat, 2010; Chengbin, 2008; Kathleen A, 2010;…

CARMA: Software for continuous affect rating and media annotation

PubMed Central

Girard, Jeffrey M

2017-01-01

CARMA is a media annotation program that collects continuous ratings while displaying audio and video files. It is designed to be highly user-friendly and easily customizable. Based on Gottman and Levenson's affect rating dial, CARMA enables researchers and study participants to provide moment-by-moment ratings of multimedia files using a computer mouse or keyboard. The rating scale can be configured on a number of parameters including the labels for its upper and lower bounds, its numerical range, and its visual representation. Annotations can be displayed alongside the multimedia file and saved for easy import into statistical analysis software. CARMA provides a tool for researchers in affective computing, human-computer interaction, and the social sciences who need to capture the unfolding of subjective experience and observable behavior over time. PMID:29308198

Extreme sensitivity in Thermoacoustics

NASA Astrophysics Data System (ADS)

Juniper, Matthew

2017-11-01

In rocket engines and gas turbines, fluctuations in the heat release rate can lock in to acoustic oscillations and grow catastrophically. Nine decades of engine development have shown that these oscillations are difficult to predict but can usually be eliminated with small ad hoc design changes. The difficulty in prediction arises because the oscillations' growth rate is exceedingly sensitive to parameters that cannot always be measured or simulated reliably, which introduces severe systematic error into thermoacoustic models of engines. Passive control strategies then have to be devised through full scale engine tests, which can be ruinously expensive. For the Apollo F1 engine, for example, 2000 full-scale tests were required. Even today, thermoacoustic oscillations often re-appear unexpectedly at full engine test stage. Although the physics is well known, a novel approach to design is required. In this presentation, the parameters of a thermoacoustic model are inferred from many thousand automated experiments using inverse uncertainty quantification. The adjoint of this model is used to obtain cheaply the gradients of every unstable mode with respect to the model parameters. This gradient information is then used in an optimization algorithm to stabilize every thermoacoustic mode by subtly changing the geometry of the model.

Cost Scaling of a Real-World Exhaust Waste Heat Recovery Thermoelectric Generator: A Deeper Dive

NASA Technical Reports Server (NTRS)

Hendricks, Terry J.; Yee, Shannon; LeBlanc, Saniya

2015-01-01

Cost is equally important to power density or efficiency for the adoption of waste heat recovery thermoelectric generators (TEG) in many transportation and industrial energy recovery applications. In many cases the system design that minimizes cost (e.g., the $/W value) can be very different than the design that maximizes the system's efficiency or power density, and it is important to understand the relationship between those designs to optimize TEG performance-cost compromises. Expanding on recent cost analysis work and using more detailed system modeling, an enhanced cost scaling analysis of a waste heat recovery thermoelectric generator with more detailed, coupled treatment of the heat exchangers has been performed. In this analysis, the effect of the heat lost to the environment and updated relationships between the hot-side and cold-side conductances that maximize power output are considered. This coupled thermal and thermoelectric treatment of the exhaust waste heat recovery thermoelectric generator yields modified cost scaling and design optimization equations, which are now strongly dependent on the heat leakage fraction, exhaust mass flow rate, and heat exchanger effectiveness. This work shows that heat exchanger costs most often dominate the overall TE system costs, that it is extremely difficult to escape this regime, and in order to achieve TE system costs of $1/W it is necessary to achieve heat exchanger costs of $1/(W/K). Minimum TE system costs per watt generally coincide with maximum power points, but Preferred TE Design Regimes are identified where there is little cost penalty for moving into regions of higher efficiency and slightly lower power outputs. These regimes are closely tied to previously-identified low cost design regimes. This work shows that the optimum fill factor Fopt minimizing system costs decreases as heat losses increase, and increases as exhaust mass flow rate and heat exchanger effectiveness increase. These findings have profound implications on the design and operation of various thermoelectric (TE) waste heat 3 recovery systems. This work highlights the importance of heat exchanger costs on the overall TEG system costs, quantifies the possible TEG performance-cost domain space based on heat exchanger effects, and provides a focus for future system research and development efforts.

A corrosion control concept by scale engineering: a novel green inhibitor applied for high temperature and pressure aqueous supercritical CO2 systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiabin, Han; Carey, James W; Zhang, Jinsuo

2011-01-27

Traditional corrosion inhibitors are bio-toxic chemicals with organic components that bond to the fresh metal surface and thus isolate them from corrosive environments. The shortcoming of these inhibitors is that they are less effective in high-temperature and high-pressure environments, and where corrosion scale is formed or particulates are deposited. In this paper, we describe a novel green inorganic inhibitor made of environmentally friendly and cost-effective geo-material that was developed for high-temperature and high-pressure environments, particularly under scale-forming conditions. It inhibits corrosion by enhancing the protectiveness of corrosion scale. In contrast to traditional corrosion inhibitors which are efficient for bare surfacemore » corrosion but not effective with scale, the novel inhibitor has no effect on bare surface corrosion but greatly improves corrosion inhibition under scale-formation conditions. This is because a homogeneous scale doped with inhibitor component forms. This enhanced corrosion scale demonstrated excellent protection against corrosion. In high-pressure CO{sub 2} systems (pCO{sub 2}=10 Mpa, T=50 C and [NaCl]=1 wt%) without inhibitor, the bare-surface corrosion rate decreases from ca. 10 mm/y to 0.3 mm/year due to formation of scale. Application of a six hundred ppm solution ofthe new inorganic inhibitor reduced the corrosion rate to 0.01 mm/year, an additional factor of 30. The current inhibitor product was designed for application to CO{sub 2} systems that form corrosion scale, including but not limited to oil and gas wells, offshore production of oil and gas, CO{sub 2} sequestration and enhanced geothermal production involving CO{sub 2}.« less

Predicting rates of isotopic turnover across the animal kingdom: a synthesis of existing data.

PubMed

Thomas, Stephen M; Crowther, Thomas W

2015-05-01

The stable isotopes of carbon ((12)C, (13)C) and nitrogen ((14)N, (15)N) represent powerful tools in food web ecology, providing a wide range of dietary information in animal consumers. However, identifying the temporal window over which a consumer's isotopic signature reflects its diet requires an understanding of elemental incorporation, a process that varies from days to years across species and tissue types. Though theory predicts body size and temperature are likely to control incorporation rates, this has not been tested empirically across a morphologically and phylogenetically diverse range of taxa. Readily available estimates of this relationship would, however, aid in the design of stable isotope food web investigations and improve the interpretation of isotopic data collected from natural systems. Using literature-derived turnover estimates from animal species ranging in size from 1 mg to 2000 kg, we develop a predictive tool for stable isotope ecologists, allowing for estimation of incorporation rates in the structural tissues of entirely novel taxa. In keeping with metabolic scaling theory, we show that isotopic turnover rates of carbon and nitrogen in whole organisms and muscle tissue scale allometrically with body mass raised approximately to the power -0.19, an effect modulated by body temperature. This relationship did not, however, apply to incorporation rates in splanchnic tissues, which were instead dependent on the thermoregulation tactic employed by an organism, being considerably faster in endotherms than ectotherms. We believe the predictive turnover equations we provide can improve the design of experiments and interpretation of results obtained in future stable isotopic food web studies. © 2014 The Authors. Journal of Animal Ecology © 2014 British Ecological Society.

Comparing Audio and Video Data for Rating Communication

PubMed Central

Williams, Kristine; Herman, Ruth; Bontempo, Daniel

2013-01-01

Video recording has become increasingly popular in nursing research, adding rich nonverbal, contextual, and behavioral information. However, benefits of video over audio data have not been well established. We compared communication ratings of audio versus video data using the Emotional Tone Rating Scale. Twenty raters watched video clips of nursing care and rated staff communication on 12 descriptors that reflect dimensions of person-centered and controlling communication. Another group rated audio-only versions of the same clips. Interrater consistency was high within each group with ICC (2,1) for audio = .91, and video = .94. Interrater consistency for both groups combined was also high with ICC (2,1) for audio and video = .95. Communication ratings using audio and video data were highly correlated. The value of video being superior to audio recorded data should be evaluated in designing studies evaluating nursing care. PMID:23579475

Assessing communication quality of consultations in primary care: initial reliability of the Global Consultation Rating Scale, based on the Calgary-Cambridge Guide to the Medical Interview

PubMed Central

Burt, Jenni; Abel, Gary; Elmore, Natasha; Campbell, John; Roland, Martin; Benson, John; Silverman, Jonathan

2014-01-01

Objectives To investigate initial reliability of the Global Consultation Rating Scale (GCRS: an instrument to assess the effectiveness of communication across an entire doctor–patient consultation, based on the Calgary-Cambridge guide to the medical interview), in simulated patient consultations. Design Multiple ratings of simulated general practitioner (GP)–patient consultations by trained GP evaluators. Setting UK primary care. Participants 21 GPs and six trained GP evaluators. Outcome measures GCRS score. Methods 6 GP raters used GCRS to rate randomly assigned video recordings of GP consultations with simulated patients. Each of the 42 consultations was rated separately by four raters. We considered whether a fixed difference between scores had the same meaning at all levels of performance. We then examined the reliability of GCRS using mixed linear regression models. We augmented our regression model to also examine whether there were systematic biases between the scores given by different raters and to look for possible order effects. Results Assessing the communication quality of individual consultations, GCRS achieved a reliability of 0.73 (95% CI 0.44 to 0.79) for two raters, 0.80 (0.54 to 0.85) for three and 0.85 (0.61 to 0.88) for four. We found an average difference of 1.65 (on a 0–10 scale) in the scores given by the least and most generous raters: adjusting for this evaluator bias increased reliability to 0.78 (0.53 to 0.83) for two raters; 0.85 (0.63 to 0.88) for three and 0.88 (0.69 to 0.91) for four. There were considerable order effects, with later consultations (after 15–20 ratings) receiving, on average, scores more than one point higher on a 0–10 scale. Conclusions GCRS shows good reliability with three raters assessing each consultation. We are currently developing the scale further by assessing a large sample of real-world consultations. PMID:24604483

Nitrogen rate strategies for reducing yield-scaled nitrous oxide emissions in maize

NASA Astrophysics Data System (ADS)

Zhao, Xu; Nafziger, Emerson D.; Pittelkow, Cameron M.

2017-12-01

Mitigating nitrogen (N) losses from agriculture without negatively impacting crop productivity is a pressing environmental and economic challenge. Reductions in N fertilizer rate are often highlighted as a solution, yet the degree to which crop yields and economic returns may be impacted at the field-level remains unclear, in part due to limited data availability. Farmers are risk averse and potential yield losses may limit the success of voluntary N loss mitigation protocols, thus understanding field-level yield tradeoffs is critical to inform policy development. Using a case study of soil N2O mitigation in the US Midwest, we conducted an ex-post assessment of two economic and two environmental N rate reduction strategies to identify promising practices for maintaining maize yields and economic returns while reducing N2O emissions per unit yield (i.e. yield-scaled emissions) compared to an assumed baseline N input level. Maize yield response data from 201 on-farm N rate experiments were combined with an empirical equation predicting N2O emissions as a function of N rate. Results indicate that the economic strategy aimed at maximizing returns to N (MRTN) led to moderate but consistent reductions in yield-scaled N2O emissions with small negative impacts on yield and slight increases in median returns. The economic optimum N rate strategy reduced yield-scaled N2O emissions in 75% of cases but increased them otherwise, challenging the assumption that this strategy will automatically reduce environmental impacts per unit production. Both environmental strategies, one designed to increase N recovery efficiency and one to balance N inputs with grain N removal, further reduced yield-scaled N2O emissions but were also associated with negative yield penalties and decreased returns. These results highlight the inherent tension between achieving agronomic and economic goals while reducing environmental impacts which is often overlooked in policy discussions. To enable the development of more scalable environmental N loss mitigation strategies, yield tradeoffs occurring at the critical point of adoption (i.e. the farm-level) should be considered.

Implementation and validation of a CubeSat laser transmitter

NASA Astrophysics Data System (ADS)

Kingsbury, R. W.; Caplan, D. O.; Cahoy, K. L.

2016-03-01

The paper presents implementation and validation results for a CubeSat-scale laser transmitter. The master oscillator power amplifier (MOPA) design produces a 1550 nm, 200mW average power optical signal through the use of a directly modulated laser diode and a commercial fiber amplifier. The prototype design produces high-fidelity M-ary pulse position modulated (PPM) waveforms (M=8 to 128), targeting data rates > 10 Mbit/s while meeting a constraining 8W power allocation. We also present the implementation of an avalanche photodiode (APD) receiver with measured transmitter-to-receiver performance within 3 dB of theory. Via loopback, the compact receiver design can provide built-in self-test and calibration capabilities, and supports incremental on-orbit testing of the design.

Upscaling Self-Sustaining Treatment for Active Remediation (STAR): Experimental Study of Scaling Relationships for Smouldering Combustion to Remediate Soil

NASA Astrophysics Data System (ADS)

Kinsman, L.; Gerhard, J.; Torero, J.; Scholes, G.; Murray, C.

2013-12-01

Self-sustaining Treatment for Active Remediation (STAR) is a relatively new remediation approach for soil contaminated with organic industrial liquids. This technology uses smouldering combustion, a controlled, self-sustaining burning reaction, to destroy nonaqueous phase liquids (NAPLs) and thereby render soil clean. While STAR has been proven at the bench scale, success at industrial scales requires the process to be scaled-up significantly. The objective of this study was to conduct an experimental investigation into how liquid smouldering combustion phenomena scale. A suite of detailed forward smouldering experiments were conducted in short (16 cm dia. x 22 cm high), intermediate (16 cm dia. x 127 cm high), and large (97 cm dia. x 300 cm high; a prototype ex-situ reactor) columns; this represents scaling of up to 530 times based on the volume treated. A range of fuels were investigated, with the majority of experiments conducted using crude oil sludge as well as canola oil as a non-toxic surrogate for hazardous contaminants. To provide directly comparable data sets and to isolate changes in the smouldering reaction which occurred solely due to scaling effects, sand grain size, contaminant type, contaminant concentration and air injection rates were controlled between the experimental scales. Several processes could not be controlled and were identified to be susceptible to changes in scale, including: mobility of the contaminant, heat losses, and buoyant flow effects. For each experiment, the propagation of the smouldering front was recorded using thermocouples and analyzed by way of temperature-time and temperature-distance plots. In combination with the measurement of continuous mass loss and gaseous emissions, these results were used to evaluate the fundamental differences in the way the reaction front propagates through the mixture of sand and fuel across the various scales. Key governing parameters were compared between the small, intermediate, and large scale experiments, including: peak temperatures, velocities and thicknesses of the smouldering front, rates of mass destruction of the contaminant, and rates of gaseous emissions during combustion. Additionally, upward and downward smouldering experiments were compared at the column scale to assess the significance of buoyant flow effects. An understanding of these scaling relationships will provide important information to aid in the design of field-scale applications of STAR.

Recovery of Water from Boiler Flue Gas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edward Levy; Harun Bilirgen; Kwangkook Jeong

2008-09-30

This project dealt with use of condensing heat exchangers to recover water vapor from flue gas at coal-fired power plants. Pilot-scale heat transfer tests were performed to determine the relationship between flue gas moisture concentration, heat exchanger design and operating conditions, and water vapor condensation rate. The tests also determined the extent to which the condensation processes for water and acid vapors in flue gas can be made to occur separately in different heat transfer sections. The results showed flue gas water vapor condensed in the low temperature region of the heat exchanger system, with water capture efficiencies depending stronglymore » on flue gas moisture content, cooling water inlet temperature, heat exchanger design and flue gas and cooling water flow rates. Sulfuric acid vapor condensed in both the high temperature and low temperature regions of the heat transfer apparatus, while hydrochloric and nitric acid vapors condensed with the water vapor in the low temperature region. Measurements made of flue gas mercury concentrations upstream and downstream of the heat exchangers showed a significant reduction in flue gas mercury concentration within the heat exchangers. A theoretical heat and mass transfer model was developed for predicting rates of heat transfer and water vapor condensation and comparisons were made with pilot scale measurements. Analyses were also carried out to estimate how much flue gas moisture it would be practical to recover from boiler flue gas and the magnitude of the heat rate improvements which could be made by recovering sensible and latent heat from flue gas.« less

Convergent Validity with the BERS-2 Teacher Rating Scale and the Achenbach Teacher's Report Form: A Replication and Extension

ERIC Educational Resources Information Center

Benner, Gregory J.; Beaudoin, Kathleen; Mooney, Paul; Uhing, Brad M.; Pierce, Corey D.

2008-01-01

In the present study, we sought to extend instrument validation research for a strength-based emotional and behavior rating scale, the "Teacher Rating Scale of the Behavior and Emotional Rating Scale-Second Edition" (BERS-2; Epstein, M. H. (2004). "Behavioral and emotional rating scale" (2nd ed.). Austin, TX: PRO-ED) through…

The Behavior Problems Inventory-Short Form for individuals with intellectual disabilities: part I: development and provisional clinical reference data.

PubMed

Rojahn, J; Rowe, E W; Sharber, A C; Hastings, R; Matson, J L; Didden, R; Kroes, D B H; Dumont, E L M

2012-05-01

The Behavior Problems Inventory-01 (BPI-01) is an informant-based behaviour rating instrument that was designed to assess maladaptive behaviours in individuals with intellectual disabilities (ID). Its items fall into one of three sub-scales: Self-injurious Behavior (14 items), Stereotyped Behavior (24 items), and Aggressive/Destructive Behavior (11 items). Each item is rated on a frequency scale (0 = never to 4 = hourly), and a severity scale (0 = no problem to 3 = severe problem). The BPI-01 has been successfully used in several studies and has shown acceptable to very good psychometric properties. One concern raised by some investigators was the large number of items on the BPI-01, which has reduced its user friendliness for certain applications. Furthermore, researchers and clinicians were often uncertain how to interpret their BPI-01 data without norms or a frame of reference. The Behavior Problems Inventory-Short Form (BPI-S) was empirically developed, based on an aggregated archival data set of BPI-01 data from individuals with ID from nine locations in the USA, Wales, England, the Netherlands, and Romania (n = 1122). The BPI-S uses the same rating system and the same three sub-scales as the BPI-01, but has fewer items: Self-injurious Behavior (8 items), Stereotyped Behavior (12 items), and Aggressive/Destructive Behavior (10 items). Rating anchors for the severity scales of the Self-injurious Behavior and the Aggressive/Destructive Behavior sub-scales were added in an effort to enhance the objectivity of the ratings. The sensitivity of the BPI-S compared with the BPI-01 was high (0.92 to 0.99), and so were the correlations between the analogous BPI-01 and the BPI-S sub-scales (0.96 to 0.99). Means and standard deviations were generated for both BPI versions in a Sex-by-age matrix, and in a Sex-by-ID Level matrix. Combined sex ranges are also provided by age and level of ID. In summary, the BPI-S is a very useful alternative to the BPI-01, especially for research and evaluation purposes involving groups of individuals. © 2011 The Authors. Journal of Intellectual Disability Research © 2011 Blackwell Publishing Ltd.

The Brunnsviken Brief Quality of Life Scale (BBQ): Development and Psychometric Evaluation.

PubMed

Lindner, Philip; Frykheden, Ola; Forsström, David; Andersson, Erik; Ljótsson, Brjánn; Hedman, Erik; Andersson, Gerhard; Carlbring, Per

2016-04-01

Measurements of subjective quality of life (QoL) are an important complement to symptom ratings in clinical research and practice. Despite there being several established QoL self-rating scales, we identified a need for a freely accessible, easy-to-use inventory, validated for use with both clinical and non-clinical samples, based on the overall life satisfaction conceptualization of QoL. The Brunnsviken Brief Quality of life scale (BBQ) was designed to meet these requirements. Items were selected by performing a factor analysis on a large data-set of QoL ratings collected previously. Six life areas (Leisure time, View on life, Creativity, Learning, Friends and Friendship, and View of self) were identified as important for overall QoL and were included in the BBQ. A psychometric evaluation was performed using two independent samples: healthy undergraduate students (n = 163), and a sample seeking treatment for social anxiety disorder (n = 568). Results suggested a unifactorial structure, with good concurrent and convergent validity, high internal and test-retest reliability, and accurate classification ability. We conclude that the BBQ is a valid and reliable measure of subjective QoL for use in clinical and research settings. The BBQ is presently available in 31 languages and can be freely downloaded from www.bbqscale.com .

Learning and liking an artificial musical system: Effects of set size and repeated exposure

PubMed Central

Loui, Psyche; Wessel, David

2009-01-01

We report an investigation of humans' musical learning ability using a novel musical system. We designed an artificial musical system based on the Bohlen-Pierce scale, a scale very different from Western music. Melodies were composed from chord progressions in the new scale by applying the rules of a finite-state grammar. After exposing participants to sets of melodies, we conducted listening tests to assess learning, including recognition tests, generalization tests, and subjective preference ratings. In Experiment 1, participants were presented with 15 melodies 27 times each. Forced choice results showed that participants were able to recognize previously encountered melodies and generalize their knowledge to new melodies, suggesting internalization of the musical grammar. Preference ratings showed no differentiation among familiar, new, and ungrammatical melodies. In Experiment 2, participants were given 10 melodies 40 times each. Results showed superior recognition but unsuccessful generalization. Additionally, preference ratings were significantly higher for familiar melodies. Results from the two experiments suggest that humans can internalize the grammatical structure of a new musical system following exposure to a sufficiently large set size of melodies, but musical preference results from repeated exposure to a small number of items. This dissociation between grammar learning and preference will be further discussed. PMID:20151034

Learning and liking an artificial musical system: Effects of set size and repeated exposure.

PubMed

Loui, Psyche; Wessel, David

2008-10-01

We report an investigation of humans' musical learning ability using a novel musical system. We designed an artificial musical system based on the Bohlen-Pierce scale, a scale very different from Western music. Melodies were composed from chord progressions in the new scale by applying the rules of a finite-state grammar. After exposing participants to sets of melodies, we conducted listening tests to assess learning, including recognition tests, generalization tests, and subjective preference ratings. In Experiment 1, participants were presented with 15 melodies 27 times each. Forced choice results showed that participants were able to recognize previously encountered melodies and generalize their knowledge to new melodies, suggesting internalization of the musical grammar.Preference ratings showed no differentiation among familiar, new, and ungrammatical melodies. In Experiment 2, participants were given 10 melodies 40 times each. Results showed superior recognition but unsuccessful generalization. Additionally, preference ratings were significantly higher for familiar melodies. Results from the two experiments suggest that humans can internalize the grammatical structure of a new musical system following exposure to a sufficiently large set size of melodies, but musical preference results from repeated exposure to a small number of items. This dissociation between grammar learning and preference will be further discussed.

Sharing medicine: the candidacy of medicines and other household items for sharing, Dominican Republic.

PubMed

Dohn, Michael N; Pilkington, Hugo

2014-01-01

People share medicines and problems can result from this behavior. Successful interventions to change sharing behavior will require understanding people's motives and purposes for sharing medicines. Better information about how medicines fit into the gifting and reciprocity system could be useful in designing interventions to modify medicine sharing behavior. However, it is uncertain how people situate medicines among other items that might be shared. This investigation is a descriptive study of how people sort medicines and other shareable items. This study in the Dominican Republic examined how a convenience sample (31 people) sorted medicines and rated their shareability in relation to other common household items. We used non-metric multidimensional scaling to produce association maps in which the distances between items offer a visual representation of the collective opinion of the participants regarding the relationships among the items. In addition, from a pile sort constrained by four categories of whether sharing or loaning the item was acceptable (on a scale from not shareable to very shareable), we assessed the degree to which the participants rated the medicines as shareable compared to other items. Participants consistently grouped medicines together in all pile sort activities; yet, medicines were mixed with other items when rated by their candidacy to be shared. Compared to the other items, participants had more variability of opinion as to whether medicines should be shared. People think of medicines as a distinct group, suggesting that interventions might be designed to apply to medicines as a group. People's differing opinions as to whether it was appropriate to share medicines imply a degree of uncertainty or ambiguity that health promotion interventions might exploit to alter attitudes and behaviors. These findings have implications for the design of health promotion interventions to impact medicine sharing behavior.

Construction of a Genome-Scale Metabolic Model of Arthrospira platensis NIES-39 and Metabolic Design for Cyanobacterial Bioproduction

PubMed Central

Yoshikawa, Katsunori; Aikawa, Shimpei; Kojima, Yuta; Toya, Yoshihiro; Furusawa, Chikara; Kondo, Akihiko; Shimizu, Hiroshi

2015-01-01

Arthrospira (Spirulina) platensis is a promising feedstock and host strain for bioproduction because of its high accumulation of glycogen and superior characteristics for industrial production. Metabolic simulation using a genome-scale metabolic model and flux balance analysis is a powerful method that can be used to design metabolic engineering strategies for the improvement of target molecule production. In this study, we constructed a genome-scale metabolic model of A. platensis NIES-39 including 746 metabolic reactions and 673 metabolites, and developed novel strategies to improve the production of valuable metabolites, such as glycogen and ethanol. The simulation results obtained using the metabolic model showed high consistency with experimental results for growth rates under several trophic conditions and growth capabilities on various organic substrates. The metabolic model was further applied to design a metabolic network to improve the autotrophic production of glycogen and ethanol. Decreased flux of reactions related to the TCA cycle and phosphoenolpyruvate reaction were found to improve glycogen production. Furthermore, in silico knockout simulation indicated that deletion of genes related to the respiratory chain, such as NAD(P)H dehydrogenase and cytochrome-c oxidase, could enhance ethanol production by using ammonium as a nitrogen source. PMID:26640947

Direct evidence of atomic-scale structural fluctuations in catalyst nanoparticles.

PubMed

Lin, Pin Ann; Gomez-Ballesteros, Jose L; Burgos, Juan C; Balbuena, Perla B; Natarajan, Bharath; Sharma, Renu

2017-05-01

Rational catalyst design requires an atomic scale mechanistic understanding of the chemical pathways involved in the catalytic process. A heterogeneous catalyst typically works by adsorbing reactants onto its surface, where the energies for specific bonds to dissociate and/or combine with other species (to form desired intermediate or final products) are lower. Here, using the catalytic growth of single-walled carbon nanotubes (SWCNTs) as a prototype reaction, we show that the chemical pathway may in-fact involve the entire catalyst particle, and can proceed via the fluctuations in the formation and decomposition of metastable phases in the particle interior. We record in situ and at atomic resolution, the dynamic phase transformations occurring in a Cobalt catalyst nanoparticle during SWCNT growth, using a state-of-the-art environmental transmission electron microscope (ETEM). The fluctuations in catalyst carbon content are quantified by the automated, atomic-scale structural analysis of the time-resolved ETEM images and correlated with the SWCNT growth rate. We find the fluctuations in the carbon concentration in the catalyst nanoparticle and the fluctuations in nanotube growth rates to be of complementary character. These findings are successfully explained by reactive molecular dynamics (RMD) simulations that track the spatial and temporal evolution of the distribution of carbon atoms within and on the surface of the catalyst particle. We anticipate that our approach combining real-time, atomic-resolution image analysis and molecular dynamics simulations will facilitate catalyst design, improving reaction efficiencies and selectivity towards the growth of desired structure.

Care satisfaction, hope, and life functioning among adults with bipolar disorder: data from the first 1000 participants in the Systematic Treatment Enhancement Program.

PubMed

Morris, Chad D; Miklowitz, David J; Wisniewski, Stephen R; Giese, Alexis A; Thomas, Marshall R; Allen, Michael H

2005-01-01

The Systematic Treatment Enhancement Program for Bipolar Disorder (STEP-BD) is designed to evaluate the longitudinal outcome of patients with bipolar disorder. The STEP-BD disease-management model is built on evidence-based practices and a collaborative care approach designed to maximize specific and nonspecific treatment mechanisms. This prospective study examined the longitudinal relationships between patients' satisfaction with care, levels of hope, and life functioning in the first 1000 patients to enter STEP-BD. The study used scores from the Care Satisfaction Questionnaire, Beck Hopelessness Scale, Range of Impaired Functioning Tool, Young Mania Rating Scale, and Montgomery-Asberg Depression Rating Scale at 5 time points during a 1-year interval. Analyses tested mediational pathways between care satisfaction, hope, and life functioning, depression, and mania using mixed-effects (random and fixed) regression models. Increases in care satisfaction were associated with decreased hopelessness (P < .01) but not related to symptoms of depression or mania. Similarly, decreased hopelessness was associated with better life functioning (P < .01) but not related to symptoms of depression or mania. Depression was independently associated with poorer life functioning (P < .0001). This study provided support for the hypothesized mediational pathway between care satisfaction, hopelessness, and life functioning. Findings suggest that providing care that maximizes patient hope may be important. By so doing, patients might overcome the learned helplessness/hopelessness that often accompanies a cyclical illness and build a realistic illness-management strategy.

How to fragment peralkaline rhyolites: Observations on pumice using combined multi-scale 2D and 3D imaging

NASA Astrophysics Data System (ADS)

Hughes, Ery C.; Neave, David A.; Dobson, Katherine J.; Withers, Philip J.; Edmonds, Marie

2017-04-01

Peralkaline rhyolites are volatile-rich magmas that typically erupt in continental rift settings. The high alkali and halogen content of these magmas results in viscosities two to three orders of magnitude lower than in calc-alkaline rhyolites. Unless extensive microlite crystallisation occurs, the calculated strain rates required for fragmentation are unrealistically high, yet peralkaline pumices from explosive eruptions of varying scales are commonly microlite-free. Here we present a combined 2D scanning electron microscopy and 3D X-ray microtomography study of peralkaline rhyolite vesicle textures designed to investigate fragmentation processes. Microlite-free peralkaline pumice textures from Pantelleria, Italy, strongly resemble those from calc-alkaline rhyolites on both macro and micro scales. These textures imply that the pumices fragmented in a brittle fashion and that their peralkaline chemistry had little direct effect on textural evolution during bubble nucleation and growth. We suggest that the observed pumice textures evolved in response to high decompression rates and that peralkaline rhyolite magmas can fragment when strain localisation and high bubble overpressures develop during rapid ascent.

Airborne Subscale Transport Aircraft Research Testbed: Aircraft Model Development

NASA Technical Reports Server (NTRS)

Jordan, Thomas L.; Langford, William M.; Hill, Jeffrey S.

2005-01-01

The Airborne Subscale Transport Aircraft Research (AirSTAR) testbed being developed at NASA Langley Research Center is an experimental flight test capability for research experiments pertaining to dynamics modeling and control beyond the normal flight envelope. An integral part of that testbed is a 5.5% dynamically scaled, generic transport aircraft. This remotely piloted vehicle (RPV) is powered by twin turbine engines and includes a collection of sensors, actuators, navigation, and telemetry systems. The downlink for the plane includes over 70 data channels, plus video, at rates up to 250 Hz. Uplink commands for aircraft control include over 30 data channels. The dynamic scaling requirement, which includes dimensional, weight, inertial, actuator, and data rate scaling, presents distinctive challenges in both the mechanical and electrical design of the aircraft. Discussion of these requirements and their implications on the development of the aircraft along with risk mitigation strategies and training exercises are included here. Also described are the first training (non-research) flights of the airframe. Additional papers address the development of a mobile operations station and an emulation and integration laboratory.

Formulation design of taste-masked particles, including famotidine, for an oral fast-disintegrating dosage form.

PubMed

Mizumoto, Takao; Tamura, Tetsuya; Kawai, Hitoshi; Kajiyama, Atsushi; Itai, Shigeru

2008-04-01

In this study, the taste-masking of famotidine, which could apply to any fast-disintegrating tablet, was investigated using the spray-dry method. The target characteristics of taste-masked particles were set as follows: the dissolution rate is not to be more than 30% at 1 min and not less than 85% at 15 min, and the particle size is not to be more than 150 microm in diameter to avoid a gritty feeling in the mouth. The target dissolution profiles of spray-dried particles consisting of Aquacoat ECD30 and Eudragit NE30D or triacetin was accomplished by the screening of formulas and the appropriate lab-scale manufacturing conditions. Lab-scale testing produced taste-masked particles that met the formulation targets. On the pilot scale, spray-dried particles with attributes, such as dissolution rate and particle size, of the same quality were produced, and reproducibility was also confirmed. This confirmed that the spray-dry method produced the most appropriate taste-masked particles for fast-disintegrating dosage forms.

Non-parametric early seizure detection in an animal model of temporal lobe epilepsy

NASA Astrophysics Data System (ADS)

Talathi, Sachin S.; Hwang, Dong-Uk; Spano, Mark L.; Simonotto, Jennifer; Furman, Michael D.; Myers, Stephen M.; Winters, Jason T.; Ditto, William L.; Carney, Paul R.

2008-03-01

The performance of five non-parametric, univariate seizure detection schemes (embedding delay, Hurst scale, wavelet scale, nonlinear autocorrelation and variance energy) were evaluated as a function of the sampling rate of EEG recordings, the electrode types used for EEG acquisition, and the spatial location of the EEG electrodes in order to determine the applicability of the measures in real-time closed-loop seizure intervention. The criteria chosen for evaluating the performance were high statistical robustness (as determined through the sensitivity and the specificity of a given measure in detecting a seizure) and the lag in seizure detection with respect to the seizure onset time (as determined by visual inspection of the EEG signal by a trained epileptologist). An optimality index was designed to evaluate the overall performance of each measure. For the EEG data recorded with microwire electrode array at a sampling rate of 12 kHz, the wavelet scale measure exhibited better overall performance in terms of its ability to detect a seizure with high optimality index value and high statistics in terms of sensitivity and specificity.

Demographic and psychological variables affecting test subject evaluations of ride quality

NASA Technical Reports Server (NTRS)

Duncan, N. C.; Conley, H. W.

1975-01-01

Ride-quality experiments similar in objectives, design, and procedure were conducted, one using the U.S. Air Force Total In-Flight Simulator and the other using the Langley Passenger Ride Quality Apparatus to provide the motion environments. Large samples (80 or more per experiment) of test subjects were recruited from the Tidewater Virginia area and asked to rate the comfort (on a 7-point scale) of random aircraft motion typical of that encountered during STOL flights. Test subject characteristics of age, sex, and previous flying history (number of previous airplane flights) were studied in a two by three by three factorial design. Correlations were computed between one dependent measure, the subject's mean comfort rating, and various demographic characteristics, attitudinal variables, and the scores on Spielberger's State-Trait Anxiety Inventory. An effect of sex was found in one of the studies. Males made higher (more uncomfortable) ratings of the ride than females. Age and number of previous flights were not significantly related to comfort ratings. No significant interactions between the variables of age, sex, or previous number of flights were observed.

Reliability and validity of a videotape method to describe expressive behavior in persons with Parkinson's disease.

PubMed

Lyons, Kathleen Doyle; Tickle-Degnen, Linda

2005-01-01

The ability to effectively communicate thoughts, feelings, and identity to others is an important aspect of occupational performance. The symptoms of Parkinson's disease can impair a person's ability to verbally and non-verbally communicate with others. In order to better understand issues of communication functioning for this population, research tools to describe expressive and communicative behavior during occupation and social interaction are needed. In this study, six persons with Parkinson's disease participated in individual, videotaped interviews focused on problem solving during daily activities. Three trained graduate students viewed edited clips from the videotapes and completed a rating scale of expressive behavior designed by the authors. Data support the reliability and construct validity of the behavioral rating scale, suggesting that measures of expressive behavior of persons with Parkinson's disease can be effectively derived using short segments of videotaped activity.

Influence of airflow rate and substrate nature on heterogeneous struvite precipitation.

PubMed

Saidou, H; Ben Moussa, S; Ben Amor, M

2009-01-01

In wastewater treatment plants a hard scale consisting of struvite crystals can be formed, in pipes and recirculation pumps, during anaerobic digestion of wastewater. This study was conducted to evaluate the effect of airflow rate and substrate nature on nucleation type, induction period and supersaturation coefficient during struvite precipitation. A crystallization reactor similar to that designed for calcium carbonate precipitation was used. The pH of synthetic wastewater solution was increased by air bubbling. Experimental results indicated that the airflow increased heterogeneous precipitation of struvite. The susceptibility to scale formation was more important on polyamide and polyvinyl chloride than on stainless steel. In all cases, X-ray diffraction and infrared spectroscopy showed that the precipitated solid phase was solely struvite. No difference in crystal morphology was observed. However, at similar experimental conditions, the particle size of struvite was higher for stainless-steel material than that for plastic materials.

The MMPI-2-RF Personality Psychopathology Five (PSY-5-RF) scales: development and validity research.

PubMed

Harkness, Allan R; McNulty, John L; Finn, Jacob A; Reynolds, Shannon M; Shields, Susan M; Arbisi, Paul

2014-01-01

This article describes the development, internal psychometric, and external validation studies on scales designed to measure the Personality Psychopathology Five (PSY-5) from MMPI-2 Restructured Form (MMPI-2-RF) items. Diverse and comprehensive data sets, representing various clinical and nonclinical populations, were classified into development and validation research samples. Item selection, retention, and exclusion procedures are detailed. The final set of PSY-5-RF scales contain 104 items, with no item overlap between scales (same as the original MMPI-2 PSY-5 scales), and no item overlap with the Demoralization scale. Internal consistency estimates are comparable to the longer MMPI-2 PSY-5 scales. Appropriate convergent and discriminant validity findings utilizing various self-report, collateral rating, and record review data are reported and discussed. A particular emphasis is offered for the unique aspects of the PSY-5 model: psychoticism and disconstraint. The findings are connected to the broader PSY-5 literature and the recommended review of systems (Harkness, Reynolds, & Lilienfeld, this issue) presented in this series of articles.

Separating grey- and blackwater in urban water cycles - sensible in the view of misconnections?

PubMed

Tolksdorf, J; Cornel, P

2017-09-01

The infrastructure approach SEMIZENTRAL has been developed for fast growing cities, to meet their challenges regarding water supply as well as biowaste and wastewater treatment. The world's first full-scale SEMIZENTRAL Resource Recovery Center (RRC) has been implemented in Qingdao (PR China). Greywater (GW) and blackwater (BW) are collected and treated separately. Measurement of influent concentrations differ significantly from the design values. Thus, the operation strategy for the RRC had to be adapted. Amongst other reasons, the changed influent characteristic was caused by misconnections of GW and BW sewers. Already a misconnection rate of 6-8% requires an extension of the GW treatment process for nitrification/denitrification to fulfill effluent standards. Hence, measures should be taken to avoid or reduce misconnections. Nonetheless, in a semi-centralized scale (>10,000 inhabitants) a 100% avoidance might not be possible. Thus, consequences from misconnections should be considered during the design of source-oriented infrastructure systems.

Detection of feigned mental disorders on the personality assessment inventory: a discriminant analysis.

PubMed

Rogers, R; Sewell, K W; Morey, L C; Ustad, K L

1996-12-01

Psychological assessment with multiscale inventories is largely dependent on the honesty and forthrightness of those persons evaluated. We investigated the effectiveness of the Personality Assessment Inventory (PAI) in detecting participants feigning three specific disorders: schizophrenia, major depression, and generalized anxiety disorder. With a simulation design, we tested the PAI validity scales on 166 naive (undergraduates with minimal preparation) and 80 sophisticated (doctoral psychology students with 1 week preparation) participants. We compared their results to persons with the designated disorders: schizophrenia (n = 45), major depression (n = 136), and generalized anxiety disorder (n = 40). Although moderately effective with naive simulators, the validity scales evidenced only modest positive predictive power with their sophisticated counterparts. Therefore, we performed a two-stage discriminant analysis that yielded a moderately high hit rate (> 80%) that was maintained in the cross-validation sample, irrespective of the feigned disorder or the sophistication of the simulators.

ASRM propellant and igniter propellant development and process scale-up

NASA Technical Reports Server (NTRS)

Landers, L. C.; Booth, D. W.; Stanley, C. B.; Ricks, D. W.

1993-01-01

A program of formulation and process development for ANB-3652 motor propellant was conducted to validate design concepts and screen critical propellant composition and process parameters. Design experiments resulted in the selection of a less active grade of ferric oxide to provide better burning rate control, the establishment of AP fluidization conditions that minimized the adverse effects of particle attrition, and the selection of a higher mix temperature to improve mechanical properties. It is shown that the propellant can be formulated with AP and aluminum powder from various producers. An extended duration pilot plant run demonstrated stable equipment operation and excellent reproducibility of propellant properties. A similar program of formulation and process optimization culminating in large batch scaleup was conducted for ANB-3672 igniter propellant. The results for both ANB-3652 and ANB 37672 confirmed that their processing characteristics are compatible with full-scale production.

Supercritical fluid particle design for poorly water-soluble drugs (review).

PubMed

Sun, Yongda

2014-01-01

Supercritical fluid particle design (SCF PD) offers a number of routes to improve solubility and dissolution rate for enhancing the bioavailability of poorly water-soluble drugs, which can be adopted through an in-depth knowledge of SCF PD processes and the molecular properties of active pharmaceutical ingredients (API) and drug delivery system (DDS). Combining with research experiences in our laboratory, this review focuses on the most recent development of different routes (nano-micron particles, polymorphic particles, composite particles and bio-drug particles) to improve solubility and dissolution rate of poorly water-soluble drugs, covering the fundamental concept of SCF and the principle of SCF PD processes which are typically used to control particle size, shape, morphology and particle form and hence enable notable improvement in the dissolution rate of the poorly water-soluble drugs. The progress of the industrialization of SCF PD processes in pharmaceutical manufacturing environment with scaled-up plant under current good manufacturing process (GMP) specification is also considered in this review.

Design and implementation of wireless dose logger network for radiological emergency decision support system.

PubMed

Gopalakrishnan, V; Baskaran, R; Venkatraman, B

2016-08-01

A decision support system (DSS) is implemented in Radiological Safety Division, Indira Gandhi Centre for Atomic Research for providing guidance for emergency decision making in case of an inadvertent nuclear accident. Real time gamma dose rate measurement around the stack is used for estimating the radioactive release rate (source term) by using inverse calculation. Wireless gamma dose logging network is designed, implemented, and installed around the Madras Atomic Power Station reactor stack to continuously acquire the environmental gamma dose rate and the details are presented in the paper. The network uses XBee-Pro wireless modules and PSoC controller for wireless interfacing, and the data are logged at the base station. A LabView based program is developed to receive the data, display it on the Google Map, plot the data over the time scale, and register the data in a file to share with DSS software. The DSS at the base station evaluates the real time source term to assess radiation impact.

Design and implementation of wireless dose logger network for radiological emergency decision support system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gopalakrishnan, V.; Baskaran, R.; Venkatraman, B.

A decision support system (DSS) is implemented in Radiological Safety Division, Indira Gandhi Centre for Atomic Research for providing guidance for emergency decision making in case of an inadvertent nuclear accident. Real time gamma dose rate measurement around the stack is used for estimating the radioactive release rate (source term) by using inverse calculation. Wireless gamma dose logging network is designed, implemented, and installed around the Madras Atomic Power Station reactor stack to continuously acquire the environmental gamma dose rate and the details are presented in the paper. The network uses XBee–Pro wireless modules and PSoC controller for wireless interfacing,more » and the data are logged at the base station. A LabView based program is developed to receive the data, display it on the Google Map, plot the data over the time scale, and register the data in a file to share with DSS software. The DSS at the base station evaluates the real time source term to assess radiation impact.« less

Development and validation of the Alcohol Myopia Scale.

PubMed

Lac, Andrew; Berger, Dale E

2013-09-01

Alcohol myopia theory conceptualizes the ability of alcohol to narrow attention and how this demand on mental resources produces the impairments of self-inflation, relief, and excess. The current research was designed to develop and validate a scale based on this framework. People who were alcohol users rated items representing myopic experiences arising from drinking episodes in the past month. In Study 1 (N = 260), the preliminary 3-factor structure was supported by exploratory factor analysis. In Study 2 (N = 289), the 3-factor structure was substantiated with confirmatory factor analysis, and it was superior in fit to an empirically indefensible 1-factor structure. The final 14-item scale was evaluated with internal consistency reliability, discriminant validity, convergent validity, criterion validity, and incremental validity. The alcohol myopia scale (AMS) illuminates conceptual underpinnings of this theory and yields insights for understanding the tunnel vision that arises from intoxication.

Water recovery by catalytic treatment of urine vapor

NASA Technical Reports Server (NTRS)

Budininkas, P.; Quattrone, P. D.; Leban, M. I.

1980-01-01

The objective of this investigation was to demonstrate the feasibility of water recovery on a man-rated scale by the catalytic processing of untreated urine vapor. For this purpose, two catalytic systems, one capable of processing an air stream containing low urine vapor concentrations and another to process streams with high urine vapor concentrations, were designed, constructed, and tested to establish the quality of the recovered water.

Getting Started for Preparing Pre-Service Early Childhood Teachers in Terms of Sustainable Food Consumption: The Current Situation at a Public University in Turkey

ERIC Educational Resources Information Center

Alacam, Nur; Sahin, Elvan

2017-01-01

This study investigated the food consumption and nutrition perceptions of pre-service early childhood teachers using a mixed method research design. Data was gathered from 37 pre-service early childhood teachers through survey consisting of items in rating scale and open-ended questions. Descriptive analyses were conducted to report pre-service…

Subjective Mental Health, Peer Relations, Family, and School Environment in Adolescents with Intellectual Developmental Disorder: A First Report of a New Questionnaire Administered on Tablet PCs

ERIC Educational Resources Information Center

Boström, Petra; Johnels, Jakob Åsberg; Thorson, Maria; Broberg, Malin

2016-01-01

Few studies have explored the subjective mental health of adolescents with intellectual disabilities, while proxy ratings indicate an overrepresentation of mental health problems. The present study reports on the design and an initial empirical evaluation of the Well-being in Special Education Questionnaire (WellSEQ). Questions, response scales,…

NaK Plugging Meter Design for the Feasibility Test Loops

NASA Technical Reports Server (NTRS)

Pearson, J. Boise; Godfroy, Thomas J.; Reid, Robert S.; Polzin, Kurt A.

2008-01-01

The design and predicted performance of a plugging meter for use in the measurement of NaK impurity levels are presented. The plugging meter is incorporated into a Feasibility Test Loop (FTL), which is a small pumped-NaK loop designed to enable the rapid, small-scale evaluation of techniques such as in situ purification methods and to permit the measurement of bulk material transport effects (not mechanisms) under flow conditions that are representative of a fission surface power reactor. The FTL operates at temperatures similar to those found in a reactor, with a maximum hot side temperature of 900 K and a corresponding cold side temperature of 860 K. In the plugging meter a low flow rate bypass loop is cooled until various impurities (primarily oxides) precipitate out of solution. The temperatures at which these impurities precipitate are indicative of the level of impurities in the NaK. The precipitates incrementally plug a small orifice in the bypass loop, which is detected by monitoring changes in the liquid metal flow rate.

Development of the WTS-4 wind turbine design

NASA Astrophysics Data System (ADS)

Hasbrouck, T. M.; Divalentin, E.

Design features, developmental aspects, and financial projections for the WTS-4 4 MW wind turbine are presented. The WTS-4 is a horizontal axis, downwind, two-bladed, variable pitch machine. Start-up is at 7 m/s, rated power is reached at 15 m/s, and shut-down is set at 27 m/s, with all controls operating in a stand-alone mode by means of microprocessors. Each blade is 125 ft long, constructed of filament wound fiberglass reinforced epoxy, and attached at the root to a teetered steel alloy hub, which compensates for the shear caused by the tower shadow. Pitch is controlled by an electrohydraulic mechanism, and can be effected at a rate of 5 deg/s. Details of the nacelle components and costruction are provided, together with features of the system controller and design trade-offs. Cost comparisons with utility scale coal and oil baseload generation plants indicate that wind turbines will become cost competitive by 1985 and are favored thereafter.

Early reading performance: a comparison of teacher-based and test-based assessments.

PubMed

Kenny, D T; Chekaluk, E

1993-04-01

An unresolved question in early screening is whether test-based or teacher-based assessments should form the basis of the classification of children at risk of educational failure. Available structured teacher rating scales are lacking in predictive validity, and teacher predictions of students likely to experience reading difficulties have yielded disappointing true positive rates, with teachers failing to identify the majority of severely disabled readers. For this study, three educational screening instruments were developed: (a) a single teacher rating, categorizing children into three levels of reading ability (advanced, average, poor); (b) a 15-item teacher questionnaire designed to measure students' cognitive and language ability, attentional and behavioral characteristics, and academic performance; and (c) a battery of language and reading tests that are predictive of, or correlate with, reading failure. The concurrent validity of each instrument was assessed in a sample of 312 Australian schoolchildren from kindergarten, Year 1, and Year 2. Students were assessed at the end of the 1989 school year after having completed 1, 2, or 3 years of schooling. The results suggest that the nature of the skills required for success in reading changes in the first 3 years of schooling. Both teachers and tests concur more closely as children progress through the elementary years and as the risk behavior (reading) becomes more accessible to direct measurement. Carefully focused teacher rating scales may be a cost-effective means of identifying children at risk of reading failure. Improved teacher rating scales should be developed and used to assist in the early screening process.

Clinical Decision Making in the Management of Patients With Cervicogenic Dizziness: A Case Series.

PubMed

Jung, Francis C; Mathew, Sherin; Littmann, Andrew E; MacDonald, Cameron W

2017-11-01

Study Design Case series. Background Although growing recognition of cervicogenic dizziness (CGD) is emerging, there is still no gold standard for the diagnosis of CGD. The purpose of this case series is to describe the clinical decision making utilized in the management of 7 patients presenting with CGD. Case Description Patients presenting with neck pain and accompanying subjective symptoms, including dizziness, unsteadiness, light-headedness, and visual disturbance, were selected. Clinical evidence of a temporal relationship between neck pain and dizziness, with or without sensorimotor disturbances, was assessed. Clinical decision making followed a 4-step process, informed by the current available best evidence. Outcome measures included the numeric rating scale for dizziness and neck pain, the Dizziness Handicap Inventory, Patient-Specific Functional Scale, and global rating of change. Outcomes Seven patients (mean age, 57 years; range, 31-86 years; 7 female) completed physical therapy management at an average of 13 sessions (range, 8-30 sessions) over a mean of 7 weeks. Clinically meaningful improvements were observed in the numeric rating scale for dizziness (mean difference, 5.7; 95% confidence interval [CI]: 4.0, 7.5), neck pain (mean difference, 5.4; 95% CI: 3.8, 7.1), and the Dizziness Handicap Inventory (mean difference, 32.6; 95% CI: 12.9, 52.2) at discontinuation. Patients also demonstrated overall satisfaction via the Patient-Specific Functional Scale (mean difference, 9) and global rating of change (mean, +6). Discussion This case series describes the physical therapist decision making, management, and outcomes in patients with CGD. Further investigation is warranted to develop a valid clinical decision-making guideline to inform management of patients with CGD. Level of Evidence Diagnosis, therapy, level 4. J Orthop Sports Phys Ther 2017;47(11):874-884. Epub 9 Oct 2017. doi:10.2519/jospt.2017.7425.

A Multi-scale Approach for CO2 Accounting and Risk Analysis in CO2 Enhanced Oil Recovery Sites

NASA Astrophysics Data System (ADS)

Dai, Z.; Viswanathan, H. S.; Middleton, R. S.; Pan, F.; Ampomah, W.; Yang, C.; Jia, W.; Lee, S. Y.; McPherson, B. J. O. L.; Grigg, R.; White, M. D.

2015-12-01

Using carbon dioxide in enhanced oil recovery (CO2-EOR) is a promising technology for emissions management because CO2-EOR can dramatically reduce carbon sequestration costs in the absence of greenhouse gas emissions policies that include incentives for carbon capture and storage. This study develops a multi-scale approach to perform CO2 accounting and risk analysis for understanding CO2 storage potential within an EOR environment at the Farnsworth Unit of the Anadarko Basin in northern Texas. A set of geostatistical-based Monte Carlo simulations of CO2-oil-water flow and transport in the Marrow formation are conducted for global sensitivity and statistical analysis of the major risk metrics: CO2 injection rate, CO2 first breakthrough time, CO2 production rate, cumulative net CO2 storage, cumulative oil and CH4 production, and water injection and production rates. A global sensitivity analysis indicates that reservoir permeability, porosity, and thickness are the major intrinsic reservoir parameters that control net CO2 injection/storage and oil/CH4 recovery rates. The well spacing (the distance between the injection and production wells) and the sequence of alternating CO2 and water injection are the major operational parameters for designing an effective five-spot CO2-EOR pattern. The response surface analysis shows that net CO2 injection rate increases with the increasing reservoir thickness, permeability, and porosity. The oil/CH4 production rates are positively correlated to reservoir permeability, porosity and thickness, but negatively correlated to the initial water saturation. The mean and confidence intervals are estimated for quantifying the uncertainty ranges of the risk metrics. The results from this study provide useful insights for understanding the CO2 storage potential and the corresponding risks of commercial-scale CO2-EOR fields.

Auditing audits: use and development of the Oxfordshire Medical Audit Advisory Group rating system.

PubMed Central

Lawrence, M.; Griew, K.; Derry, J.; Anderson, J.; Humphreys, J.

1994-01-01

OBJECTIVES--To assess the value of the Oxfordshire Medical Audit Advisory Group rating system in monitoring and stimulating audit activity, and to implement a development of the system. DESIGN--Use of the rating system for assessment of practice audits on three annual visits in Oxfordshire; development and use of an "audit grid" as a refinement of the system; questionnaire to all medical audit advisory groups in England and Wales. SETTING--All 85 general practices in Oxfordshire; all 95 medical audit advisory groups in England and Wales. MAIN OUTCOME MEASURES--Level of practices' audit activity as measured by rating scale and grid. Use of scale nationally together with perceptions of strengths and weaknesses as perceived by chairs of medical audit advisory groups. RESULTS--After one year Oxfordshire practices more than attained the target standards set in 1991, with 72% doing audit involving setting target standards or implementing change; by 1993 this had risen to 78%. Most audits were confined to chronic disease management, preventive care, and appointments. 38 of 92 medical audit advisory groups used the Oxfordshire group's rating scale. Its main weaknesses were insensitivity in assessing the quality of audits and failure to measure team involvement. CONCLUSIONS--The rating system is effective educationally in helping practices improve and summatively for providing feedback to family health service authorities. The grid showed up weakness in the breadth of audit topics studied. IMPLICATIONS AND ACTION--Oxfordshire practices achieved targets set for 1991-2 but need to broaden the scope of their audits and the topics studied. The advisory group's targets for 1994-5 are for 50% of practices to achieve an audit in each of the areas of clinical care, access, communication, and professional values and for 80% of audits to include setting targets or implementing change. PMID:8086911

Model evaluation of temperature dependency for carbon and nitrogen removal in a full-scale activated sludge plant treating leather-tanning wastewater.

PubMed

Görgün, Erdem; Insel, Güçlü; Artan, Nazik; Orhon, Derin

2007-05-01

Organic carbon and nitrogen removal performance of a full-scale activated sludge plant treating pre-settled leather tanning wastewater was evaluated under dynamic process temperatures. Emphasis was placed upon observed nitrogen removal depicting a highly variable magnitude with changing process temperatures. As the plant was not specifically designed for this purpose, observed nitrogen removal could be largely attributed to simultaneous nitrification and denitrification presumably occurring at increased process temperatures (T>25 degrees C) and resulting low dissolved oxygen levels (DO<0.5 mgO2/L). Model evaluation using long-term data revealed that the yearly performance of activated sludge reactor could be successfully calibrated by means of temperature dependent parameters associated with nitrification, hydrolysis, ammonification and endogenous decay parameters. In this context, the Arrhenius coefficients of (i) for the maximum autotrophic growth rate, [image omitted]A, (ii) maximum hydrolysis rate, khs and (iii) endogenous heterotrophic decay rate, bH were found to be 1.045, 1.070 and 1.035, respectively. The ammonification rate (ka) defining the degradation of soluble organic nitrogen could not be characterized however via an Arrhenius-type equation.

Effects of processing parameters on the caffeine extraction yield during decaffeination of black tea using pilot-scale supercritical carbon dioxide extraction technique.

PubMed

Ilgaz, Saziye; Sat, Ihsan Gungor; Polat, Atilla

2018-04-01

In this pilot-scale study supercritical carbon dioxide (SCCO 2 ) extraction technique was used for decaffeination of black tea. Pressure (250, 375, 500 bar), extraction time (60, 180, 300 min), temperature (55, 62.5, 70 °C), CO 2 flow rate (1, 2, 3 L/min) and modifier quantity (0, 2.5, 5 mol%) were selected as extraction parameters. Three-level and five-factor response surface methodology experimental design with a Box-Behnken type was employed to generate 46 different processing conditions. 100% of caffeine from black tea was removed under two different extraction conditions; one of which was consist of 375 bar pressure, 62.5 °C temperature, 300 min extraction time, 2 L/min CO 2 flow rate and 5 mol% modifier concentration and the other was composed of same temperature, pressure and extraction time conditions with 3 L/min CO 2 flow rate and 2.5 mol% modifier concentration. Results showed that extraction time, pressure, CO 2 flow rate and modifier quantity had great impact on decaffeination yield.

Evaluation of selected strapdown inertial instruments and pulse torque loops, volume 1

NASA Technical Reports Server (NTRS)

Sinkiewicz, J. S.; Feldman, J.; Lory, C. B.

1974-01-01

Design, operational and performance variations between ternary, binary and forced-binary pulse torque loops are presented. A fill-in binary loop which combines the constant power advantage of binary with the low sampling error of ternary is also discussed. The effects of different output-axis supports on the performance of a single-degree-of-freedom, floated gyroscope under a strapdown environment are illustrated. Three types of output-axis supports are discussed: pivot-dithered jewel, ball bearing and electromagnetic. A test evaluation on a Kearfott 2544 single-degree-of-freedom, strapdown gyroscope operating with a pulse torque loop, under constant rates and angular oscillatory inputs is described and the results presented. Contributions of the gyroscope's torque generator and the torque-to-balance electronics on scale factor variation with rate are illustrated for a SDF 18 IRIG Mod-B strapdown gyroscope operating with various pulse rebalance loops. Also discussed are methods of reducing this scale factor variation with rate by adjusting the tuning network which shunts the torque coil. A simplified analysis illustrating the principles of operation of the Teledyne two-degree-of-freedom, elastically-supported, tuned gyroscope and the results of a static and constant rate test evaluation of that instrument are presented.

Neurodevelopment of children prenatally exposed to selective reuptake inhibitor antidepressants: Toronto sibling study.

PubMed

Nulman, Irena; Koren, Gideon; Rovet, Joanne; Barrera, Maru; Streiner, David L; Feldman, Brian M

2015-07-01

The reproductive safety of selective reuptake inhibitor (SRI) antidepressants needs to be established to provide optimal control of maternal depression while protecting the fetus. To define a child's neurodevelopment following prenatal exposure to SRIs and to account for genetic and environmental confounders in a sibling design using the Toronto Motherisk prospective database. Intelligence and behavior of siblings prenatally exposed and unexposed to SRIs were assessed by using the Wechsler Preschool and Primary Scale of Intelligence-Third Edition, Child Behavior Checklist, and Conners Parent Rating Scale-Revised and subsequently compared. Mothers, diagnosed with depression using DSM-IV, were assessed for intelligence quotient (IQ) and for severity of depressive symptoms with the Center for Epidemiologic Studies Depression scale. Prenatal drug doses and durations of exposure, child's age, child's sex, birth order, severity of maternal depression symptoms, and Full Scale IQ, the primary outcome measure, of both the mother and the child were considered in the analyses. Forty-five sibling pairs (ages 3 years to 6 years 11 months, prenatally exposed and unexposed to SRIs) did not differ in their mean ± SD Full Scale IQs (103 ± 13 vs 106 ± 12; P = .30; 95% CI, -7.06 to 2.21) or rates of problematic behaviors. Significant predictor of children's intelligence was maternal IQ (P = .043, β = 0.306). Severity of maternal depression was a significant predictor of Child Behavior Checklist Internalizing (P = .019, β = 0.366), Externalizing (P = .003, β = 0.457), and Total scores (P = .001, β = 0.494). Drug doses and durations of exposure during pregnancy did not predict any outcomes of interest in the exposed siblings. SRI antidepressants were not found to be neurotoxic. Maternal depression may risk the child's future psychopathology. The sibling design in behavioral teratology aids in separating the effects of maternal depression from those of SRIs, providing stronger evidence in clinical decision-making. © Copyright 2015 Physicians Postgraduate Press, Inc.

A path analysis: a model of depression in Korean women with breast cancer-mediating effects of self-esteem and hope.

PubMed

Tae, Young Sook; Heitkemper, Margaret; Kim, Mi Yea

2012-01-01

To test a hypothetical model of depression in Korean women with breast cancer and to test the mediating effects of self-esteem and hope. Cross-sectional design. Participants were recruited from three general hospitals and one cancer hospital in Busan, South Korea. 214 Korean women diagnosed with breast cancer (stages I-III). All participants completed questionnaires (e.g., Zung Self-Rating Depression scale, Herth Hope Scale, Rosenberg Self-Esteem Scale, Health Self-Rating Scale in Health and Activity survey, Kang's Family Support Scale). Based on the literature, Mplus, version 3.0, was used to determine the best depression model with path analysis. Depression, self-esteem, hope, perceived health status, religious beliefs, family support, economic status, and fatigue. Self-esteem was directly affected by perceived health status, religious beliefs, family support, economic status, and fatigue. Hope was directly affected by family support, self-esteem, and how patients perceived their health status. Depression was directly affected by self-esteem and hope. The path analysis model explained 31% of the variance in depression in Korean women with breast cancer. A model of depression in Korean women with breast cancer was developed, and self-esteem and hope were mediating factors of depression. Self-esteem and hope must be considered when developing services to reduce depression in Korean women with breast cancer.

Scaling theory for information networks.

PubMed

Moses, Melanie E; Forrest, Stephanie; Davis, Alan L; Lodder, Mike A; Brown, James H

2008-12-06

Networks distribute energy, materials and information to the components of a variety of natural and human-engineered systems, including organisms, brains, the Internet and microprocessors. Distribution networks enable the integrated and coordinated functioning of these systems, and they also constrain their design. The similar hierarchical branching networks observed in organisms and microprocessors are striking, given that the structure of organisms has evolved via natural selection, while microprocessors are designed by engineers. Metabolic scaling theory (MST) shows that the rate at which networks deliver energy to an organism is proportional to its mass raised to the 3/4 power. We show that computational systems are also characterized by nonlinear network scaling and use MST principles to characterize how information networks scale, focusing on how MST predicts properties of clock distribution networks in microprocessors. The MST equations are modified to account for variation in the size and density of transistors and terminal wires in microprocessors. Based on the scaling of the clock distribution network, we predict a set of trade-offs and performance properties that scale with chip size and the number of transistors. However, there are systematic deviations between power requirements on microprocessors and predictions derived directly from MST. These deviations are addressed by augmenting the model to account for decentralized flow in some microprocessor networks (e.g. in logic networks). More generally, we hypothesize a set of constraints between the size, power and performance of networked information systems including transistors on chips, hosts on the Internet and neurons in the brain.

Relationship Between the Functional Status Scale and the Pediatric Overall Performance Category and Pediatric Cerebral Performance Category Scales FREE

PubMed Central

Pollack, Murray M.; Holubkov, Richard; Funai, Tomohiko; Clark, Amy; Moler, Frank; Shanley, Thomas; Meert, Kathy; Newth, Christopher J. L.; Carcillo, Joseph; Berger, John T.; Doctor, Allan; Berg, Robert A.; Dalton, Heidi; Wessel, David L.; Harrison, Rick E.; Dean, J. Michael; Jenkins, Tammara L.

2015-01-01

Importance Functional status assessment methods are important as outcome measures for pediatric critical care studies. Objective To investigate the relationships between the 2 functional status assessment methods appropriate for large-sample studies, the Functional Status Scale (FSS) and the Pediatric Overall Performance Category and Pediatric Cerebral Performance Category (POPC/PCPC) scales. Design, Setting, and Participants Prospective cohort study with random patient selection at 7 sites and 8 children’s hospitals with general/medical and cardiac/cardiovascular pediatric intensive care units (PICUs) in the Collaborative Pediatric Critical Care Research Network. Participants included all PICU patients younger than 18 years. Main Outcomes and Measures Functional Status Scale and POPC/PCPC scores determined at PICU admission (baseline) and PICU discharge. We investigated the association between the baseline and PICU discharge POPC/PCPC scores and the baseline and PICU discharge FSS scores, the dispersion of FSS scores within each of the POPC/PCPC ratings, and the relationship between the FSS neurologic components (FSS-CNS) and the PCPC. Results We included 5017 patients. We found a significant (P < .001) difference between FSS scores in each POPC or PCPC interval, with an FSS score increase with each worsening POPC/PCPC rating. The FSS scores for the good and mild disability POPC/PCPC ratings were similar and increased by 2 to 3 points for the POPC/PCPC change from mild to moderate disability, 5 to 6 points for moderate to severe disability, and 8 to 9 points for severe disability to vegetative state or coma. The dispersion of FSS scores within each POPC and PCPC rating was substantial and increased with worsening POPC and PCPC scores. We also found a significant (P < .001) difference between the FSS-CNS scores between each of the PCPC ratings with increases in the FSS-CNS score for each higher PCPC rating. Conclusions and Relevance The FSS and POPC/PCPC system are closely associated. Increases in FSS scores occur with each higher POPC and PCPC rating and with greater magnitudes of change as the dysfunction severity increases. However, the dispersion of the FSS scores indicated a lack of precision in the POPC/PCPC system when compared with the more objective and granular FSS. The relationship between the PCPC and the FSS-CNS paralleled the relationship between the FSS and POPC/PCPC system. PMID:24862461

Scaling of ratings: Concepts and methods

Treesearch

Thomas C. Brown; Terry C. Daniel

1990-01-01

Rating scales provide an efficient and widely used means of recording judgments. This paper reviews scaling issues within the context of a psychometric model of the rating process, describes several methods of scaling rating data, and compares the methods in terms of the assumptions they require about the rating process and the information they provide about the...

An examination of the effectiveness of Handwriting Without Tears instruction.

PubMed

Roberts, Gwenyth I; Derkach-Ferguson, Alanna F; Siever, Jodi E; Rose, M Sarah

2014-04-01

Handwriting is an important childhood occupation, and implications of poor handwriting may have significant long-term effects. The purpose of this study was to determine the effectiveness of Handwriting Without Tears (HWT) on Grade I students' handwriting and perception of skills. A cross-over design was used. Repeated measures, at three points, included the Minnesota Handwriting Assessment (MHA) and performance rating scales. Eighty-three boys and 66 girls with an average age of 6.2 years participated in the study. Students receiving HWT achieved significantly higher improvements compared to students with teacher-designed instruction in MHA Total Test Score and in MHA components of form, size, space, and alignment (all p < .05). Students had higher average performance ratings when receiving HWT in the first half of the school year. Instruction using HWT improves students' perception and skill in handwriting performance.

Coal desulfurization by low temperature chlorinolysis, phase 2

NASA Technical Reports Server (NTRS)

Kalvinskas, J. J.; Grohmann, K.; Rohatgi, N.; Ernest, J.; Feller, D.

1980-01-01

An engineering scale reactor system was constructed and operated for the evaluation of five high sulfur bituminous coals obtained from Kentucky, Ohio, and Illinois. Forty-four test runs were conducted under conditions of 100 by 200 mesh coal,solvents - methlychloroform and water, 60 to 130 C, 0 to 60 psig, 45 to 90 minutes, and gaseous chlorine flow rate of up to 24 SCFH. Sulfur removals demonstrated for the five coals were: maximum total sulfur removal of 46 to 89% (4 of 5 coals with methylchloroform) and 0 to 24% with water. In addition, an integrated continuous flow mini-pilot plant was designed and constructed for a nominal coal rate of 2 kilograms/hour which will be operated as part of the follow-on program. Equipment flow sheets and design drawings are included for both the batch and continuous flow mini-pilot plants.

A MEMS turbine prototype for respiration harvesting

NASA Astrophysics Data System (ADS)

Goreke, U.; Habibiabad, S.; Azgin, K.; Beyaz, M. I.

2015-12-01

The design, manufacturing, and performance characterization of a MEMS-scale turbine prototype is reported. The turbine is designed for integration into a respiration harvester that can convert normal human breathing into electrical power through electromagnetic induction. The device measures 10 mm in radius, and employs 12 blades located around the turbine periphery along with ball bearings around the center. Finite element simulations showed that an average torque of 3.07 μNm is induced at 12 lpm airflow rate, which lies in normal breathing levels. The turbine and a test package were manufactured using CNC milling on PMMA. Tests were performed at respiration flow rates between 5-25 lpm. The highest rotational speed was measured to be 9.84 krpm at 25 lpm, resulting in 8.96 mbar pressure drop across the device and 370 mW actuation power.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Manohar, AK; Yang, CG; Malkhandi, S

Iron-based alkaline rechargeable batteries have the potential of meeting the needs of large-scale electrical energy storage because of their low-cost, robustness and eco-friendliness. However, the widespread commercial deployment of iron-based batteries has been limited by the low charging efficiency and the poor discharge rate capability of the iron electrode. In this study, we have demonstrated iron electrodes containing bismuth oxide and iron sulfide with a charging efficiency of 92% and capable of being discharged at the 3C rate. Such a high value of charging efficiency combined with the ability to discharge at high rates is being reported for the firstmore » time. The bismuth oxide additive led to the in situ formation of elemental bismuth and a consequent increase in the overpotential for the hydrogen evolution reaction leading to an increase in the charging efficiency. We observed that the sulfide ions added to the electrolyte and iron sulfide added to the electrode mitigated-electrode passivation and allowed for continuous discharge at high rates. At the 3C discharge rate, a utilization of 0.2 Ah/g was achieved. The performance level of the rechargeable iron electrode demonstrated here is attractive for designing economically-viable large-scale energy storage systems based on alkaline nickel-iron and iron-air batteries. (C) 2013 The Electrochemical Society. All rights reserved.« less

Investigation of Natural Circulation Instability and Transients in Passively Safe Small Modular Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ishii, Mamoru

The NEUP funded project, NEUP-3496, aims to experimentally investigate two-phase natural circulation flow instability that could occur in Small Modular Reactors (SMRs), especially for natural circulation SMRs. The objective has been achieved by systematically performing tests to study the general natural circulation instability characteristics and the natural circulation behavior under start-up or design basis accident conditions. Experimental data sets highlighting the effect of void reactivity feedback as well as the effect of power ramp-up rate and system pressure have been used to develop a comprehensive stability map. The safety analysis code, RELAP5, has been used to evaluate experimental results andmore » models. Improvements to the constitutive relations for flashing have been made in order to develop a reliable analysis tool. This research has been focusing on two generic SMR designs, i.e. a small modular Simplified Boiling Water Reactor (SBWR) like design and a small integral Pressurized Water Reactor (PWR) like design. A BWR-type natural circulation test facility was firstly built based on the three-level scaling analysis of the Purdue Novel Modular Reactor (NMR) with an electric output of 50 MWe, namely NMR-50, which represents a BWR-type SMR with a significantly reduced reactor pressure vessel (RPV) height. The experimental facility was installed with various equipment to measure thermalhydraulic parameters such as pressure, temperature, mass flow rate and void fraction. Characterization tests were performed before the startup transient tests and quasi-steady tests to determine the loop flow resistance. The control system and data acquisition system were programmed with LabVIEW to realize the realtime control and data storage. The thermal-hydraulic and nuclear coupled startup transients were performed to investigate the flow instabilities at low pressure and low power conditions for NMR-50. Two different power ramps were chosen to study the effect of startup power density on the flow instability. The experimental startup transient results showed the existence of three different flow instability mechanisms, i.e., flashing instability, condensation induced flow instability, and density wave oscillations. In addition, the void-reactivity feedback did not have significant effects on the flow instability during the startup transients for NMR-50. ii Several initial startup procedures with different power ramp rates were experimentally investigated to eliminate the flow instabilities observed from the startup transients. Particularly, the very slow startup transient and pressurized startup transient tests were performed and compared. It was found that the very slow startup transients by applying very small power density can eliminate the flashing oscillations in the single-phase natural circulation and stabilize the flow oscillations in the phase of net vapor generation. The initially pressurized startup procedure was tested to eliminate the flashing instability during the startup transients as well. The pressurized startup procedure included the initial pressurization, heat-up, and venting process. The startup transient tests showed that the pressurized startup procedure could eliminate the flow instability during the transition from single-phase flow to two-phase flow at low pressure conditions. The experimental results indicated that both startup procedures were applicable to the initial startup of NMR. However, the pressurized startup procedures might be preferred due to short operating hours required. In order to have a deeper understanding of natural circulation flow instability, the quasi-steady tests were performed using the test facility installed with preheater and subcooler. The effect of system pressure, core inlet subcooling, core power density, inlet flow resistance coefficient, and void reactivity feedback were investigated in the quasi-steady state tests. The experimental stability boundaries were determined between unstable and stable flow conditions in the dimensionless stability plane of inlet subcooling number and Zuber number. To predict the stability boundary theoretically, linear stability analysis in the frequency domain was performed at four sections of the natural circulation test loop. The flashing phenomena in the chimney section was considered as an axially uniform heat source. And the dimensionless characteristic equation of the pressure drop perturbation was obtained by considering the void fraction effect and outlet flow resistance in the core section. The theoretical flashing boundary showed some discrepancies with previous experimental data from the quasi-steady state tests. In the future, thermal non-equilibrium was recommended to improve the accuracy of flashing instability boundary. As another part of the funded research, flow instabilities of a PWR-type SMR under low pressure and low power conditions were investigated experimentally as well. The NuScale reactor design was selected as the prototype for the PWR-type SMR. In order to experimentally study the natural circulation behavior of NuScale iii reactor during accidental scenarios, detailed scaling analyses are necessary to ensure that the scaled phenomena could be obtained in a laboratory test facility. The three-level scaling method is used as well to obtain the scaling ratios derived from various non-dimensional numbers. The design of the ideally scaled facility (ISF) was initially accomplished based on these scaling ratios. Then the engineering scaled facility (ESF) was designed and constructed based on the ISF by considering engineering limitations including laboratory space, pipe size, and pipe connections etc. PWR-type SMR experiments were performed in this well-scaled test facility to investigate the potential thermal hydraulic flow instability during the blowdown events, which might occur during the loss of coolant accident (LOCA) and loss of heat sink accident (LOHS) of the prototype PWR-type SMR. Two kinds of experiments, normal blowdown event and cold blowdown event, were experimentally investigated and compared with code predictions. The normal blowdown event was experimentally simulated since an initial condition where the pressure was lower than the designed pressure of the experiment facility, while the code prediction of blowdown started from the normal operation condition. Important thermal hydraulic parameters including reactor pressure vessel (RPV) pressure, containment pressure, local void fraction and temperature, pressure drop and natural circulation flow rate were measured and analyzed during the blowdown event. The pressure and water level transients are similar to the experimental results published by NuScale [51], which proves the capability of current loop in simulating the thermal hydraulic transient of real PWR-type SMR. During the 20000s blowdown experiment, water level in the core was always above the active fuel assemble during the experiment and proved the safety of natural circulation cooling and water recycling design of PWR-type SMR. Besides, pressure, temperature, and water level transient can be accurately predicted by RELAP5 code. However, the oscillations of natural circulation flow rate, water level and pressure drops were observed during the blowdown transients. This kind of flow oscillations are related to the water level and the location upper plenum, which is a path for coolant flow from chimney to steam generator and down comer. In order to investigate the transients start from the opening of ADS valve in both experimental and numerical way, the cold blow-down experiment is conducted. For the cold blowdown event, different from setting both reactor iv pressure vessel (RPV) and containment at high temperature and pressure, only RPV was heated close to the highest designed pressure and then open the ADS valve, same process was predicted using RELAP5 code. By doing cold blowdown experiment, the entire transients from the opening of ADS can be investigated by code and benchmarked with experimental data. Similar flow instability observed in the cold blowdown experiment. The comparison between code prediction and experiment data showed that the RELAP5 code can successfully predict the pressure void fraction and temperature transient during the cold blowdown event with limited error, but numerical instability exists in predicting natural circulation flow rate. Besides, the code is lack of capability in predicting the water level related flow instability observed in experiments.« less

Photocatalytic destruction of chlorinated solvents in water with solar energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pacheco, J.E.; Prairie, M.R.; Yellowhorse, L.

1993-08-01

Sandia National Laboratories and the National Renewable Energy Laboratory are developing a photocatalytic process to destroy organic contaminants in water. Tests with common water pollutants have been conducted at Sandia's Solar Thermal Facility using a near commercial scale, single-axis tracking parabolic trough system with a glass pipe reactor mounted at its focus. Experiments at this scale provide verification of laboratory studies and allow examination of design and operation issues at a real-lifescale. The catalyst, titanium dioxide (TiO[sub 2]), is a harmless material found in paint, cosmetics, and toothpaste. Experiments were conducted to determine the effects of key process parameters onmore » destruction rates of chlorinated organic compounds that are common water pollutants. This paper summarizes the engineering-scale results of these experiments and analyses.« less

Design Study of Wafer Seals for Future Hypersonic Vehicles

NASA Technical Reports Server (NTRS)

Dunlap, Patrick H.; Finkbeiner, Joshua R.; Steinetz, Bruce M.; DeMange, Jeffrey J.

2005-01-01

Future hypersonic vehicles require high temperature, dynamic seals in advanced hypersonic engines and on the vehicle airframe to seal the perimeters of movable panels, flaps, and doors. Current seals do not meet the demanding requirements of these applications, so NASA Glenn Research Center is developing improved designs to overcome these shortfalls. An advanced ceramic wafer seal design has shown promise in meeting these needs. Results from a design of experiments study performed on this seal revealed that several installation variables played a role in determining the amount of leakage past the seals. Lower leakage rates were achieved by using a tighter groove width around the seals, a higher seal preload, a tighter wafer height tolerance, and a looser groove length. During flow testing, a seal activating pressure acting behind the wafers combined with simulated vibrations to seat the seals more effectively against the sealing surface and produce lower leakage rates. A seal geometry study revealed comparable leakage for full-scale wafers with 0.125 and 0.25 in. thicknesses. For applications in which lower part counts are desired, fewer 0.25-in.-thick wafers may be able to be used in place of 0.125-in.-thick wafers while achieving similar performance. Tests performed on wafers with a rounded edge (0.5 in. radius) in contact with the sealing surface resulted in flow rates twice as high as those for wafers with a flat edge. Half-size wafers had leakage rates approximately three times higher than those for full-size wafers.

Precision Closed-Loop Orbital Maneuvering System Design and Performance for the Magnetospheric Multi-Scale Mission (MMS) Formation

NASA Technical Reports Server (NTRS)

Chai, Dean; Queen, Steve; Placanica, Sam

2015-01-01

NASA's Magnetospheric Multi-Scale (MMS) mission successfully launched on March 13, 2015 (UTC) consists of four identically instrumented spin-stabilized observatories that function as a constellation to study magnetic reconnection in space. The need to maintain sufficiently accurate spatial and temporal formation resolution of the observatories must be balanced against the logistical constraints of executing overly-frequent maneuvers on a small fleet of spacecraft. These two considerations make for an extremely challenging maneuver design problem. This paper focuses on the design elements of a 6-DOF spacecraft attitude control and maneuvering system capable of delivering the high-precision adjustments required by the constellation designers---specifically, the design, implementation, and on-orbit performance of the closed-loop formation-class maneuvers that include initialization, maintenance, and re-sizing. The maneuvering control system flown on MMS utilizes a micro-gravity resolution accelerometer sampled at a high rate in order to achieve closed-loop velocity tracking of an inertial target with arc-minute directional and millimeter-per-second magnitude accuracy. This paper summarizes the techniques used for correcting bias drift, sensor-head offsets, and centripetal aliasing in the acceleration measurements. It also discusses the on-board pre-maneuver calibration and compensation algorithms as well as the implementation of the post-maneuver attitude adjustments.

Summary of the Manufacture, Testing and Model Validation of a Full-Scale Radiator for Fission Surface Power Applications

NASA Technical Reports Server (NTRS)

Ellis, David L.; Calder, James; Siamidis, John

2011-01-01

A full-scale radiator for a lunar fission surface power application was manufactured by Material innovations, Inc., for the NASA Glenn Research Center. The radiator was designed to reject 6 kWt with an inlet water temperature of 400 K and a water mass flow rate of 0.5 kg/s. While not flight hardware, the radiator incorporated many potential design features and manufacturing techniques for future flight hardware. The radiator was tested at NASA Glenn Research Center for heat rejection performance. The results showed that the radiator design was capable of rejecting over 6 kWt when operating at the design conditions. The actual performance of the radiator as a function of operational manifolds, inlet water temperature and facility sink temperature was compared to the predictive model developed by NASA Glenn Research Center. The results showed excellent agreement with the model with the actual average face sheet temperature being within 1% of the predicted value. The results will be used in the design and production of NASA s next generation fission power heat rejection systems. The NASA Glenn Research Center s Technology Demonstration Unit will be the first project to take advantage of the newly developed manufacturing techniques and analytical models.

Comparing audio and video data for rating communication.

PubMed

Williams, Kristine; Herman, Ruth; Bontempo, Daniel

2013-09-01

Video recording has become increasingly popular in nursing research, adding rich nonverbal, contextual, and behavioral information. However, benefits of video over audio data have not been well established. We compared communication ratings of audio versus video data using the Emotional Tone Rating Scale. Twenty raters watched video clips of nursing care and rated staff communication on 12 descriptors that reflect dimensions of person-centered and controlling communication. Another group rated audio-only versions of the same clips. Interrater consistency was high within each group with Interclass Correlation Coefficient (ICC) (2,1) for audio .91, and video = .94. Interrater consistency for both groups combined was also high with ICC (2,1) for audio and video = .95. Communication ratings using audio and video data were highly correlated. The value of video being superior to audio-recorded data should be evaluated in designing studies evaluating nursing care.

Direct coupling of a genome-scale microbial in silico model and a groundwater reactive transport model.

PubMed

Fang, Yilin; Scheibe, Timothy D; Mahadevan, Radhakrishnan; Garg, Srinath; Long, Philip E; Lovley, Derek R

2011-03-25

The activity of microorganisms often plays an important role in dynamic natural attenuation or engineered bioremediation of subsurface contaminants, such as chlorinated solvents, metals, and radionuclides. To evaluate and/or design bioremediated systems, quantitative reactive transport models are needed. State-of-the-art reactive transport models often ignore the microbial effects or simulate the microbial effects with static growth yield and constant reaction rate parameters over simulated conditions, while in reality microorganisms can dynamically modify their functionality (such as utilization of alternative respiratory pathways) in response to spatial and temporal variations in environmental conditions. Constraint-based genome-scale microbial in silico models, using genomic data and multiple-pathway reaction networks, have been shown to be able to simulate transient metabolism of some well studied microorganisms and identify growth rate, substrate uptake rates, and byproduct rates under different growth conditions. These rates can be identified and used to replace specific microbially-mediated reaction rates in a reactive transport model using local geochemical conditions as constraints. We previously demonstrated the potential utility of integrating a constraint-based microbial metabolism model with a reactive transport simulator as applied to bioremediation of uranium in groundwater. However, that work relied on an indirect coupling approach that was effective for initial demonstration but may not be extensible to more complex problems that are of significant interest (e.g., communities of microbial species and multiple constraining variables). Here, we extend that work by presenting and demonstrating a method of directly integrating a reactive transport model (FORTRAN code) with constraint-based in silico models solved with IBM ILOG CPLEX linear optimizer base system (C library). The models were integrated with BABEL, a language interoperability tool. The modeling system is designed in such a way that constraint-based models targeting different microorganisms or competing organism communities can be easily plugged into the system. Constraint-based modeling is very costly given the size of a genome-scale reaction network. To save computation time, a binary tree is traversed to examine the concentration and solution pool generated during the simulation in order to decide whether the constraint-based model should be called. We also show preliminary results from the integrated model including a comparison of the direct and indirect coupling approaches and evaluated the ability of the approach to simulate field experiment. Published by Elsevier B.V.

On the VLSI design of a pipeline Reed-Solomon decoder using systolic arrays

NASA Technical Reports Server (NTRS)

Shao, H. M.; Deutsch, L. J.; Reed, I. S.

1987-01-01

A new very large scale integration (VLSI) design of a pipeline Reed-Solomon decoder is presented. The transform decoding technique used in a previous article is replaced by a time domain algorithm through a detailed comparison of their VLSI implementations. A new architecture that implements the time domain algorithm permits efficient pipeline processing with reduced circuitry. Erasure correction capability is also incorporated with little additional complexity. By using a multiplexing technique, a new implementation of Euclid's algorithm maintains the throughput rate with less circuitry. Such improvements result in both enhanced capability and significant reduction in silicon area.

On the VLSI design of a pipeline Reed-Solomon decoder using systolic arrays

NASA Technical Reports Server (NTRS)

Shao, Howard M.; Reed, Irving S.

1988-01-01

A new very large scale integration (VLSI) design of a pipeline Reed-Solomon decoder is presented. The transform decoding technique used in a previous article is replaced by a time domain algorithm through a detailed comparison of their VLSI implementations. A new architecture that implements the time domain algorithm permits efficient pipeline processing with reduced circuitry. Erasure correction capability is also incorporated with little additional complexity. By using multiplexing technique, a new implementation of Euclid's algorithm maintains the throughput rate with less circuitry. Such improvements result in both enhanced capability and significant reduction in silicon area.

Simulations of space charge neutralization in a magnetized electron cooler

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gerity, James; McIntyre, Peter M.; Bruhwiler, David Leslie

Magnetized electron cooling at relativistic energies and Ampere scale current is essential to achieve the proposed ion luminosities in a future electron-ion collider (EIC). Neutralization of the space charge in such a cooler can significantly increase the magnetized dynamic friction and, hence, the cooling rate. The Warp framework is being used to simulate magnetized electron beam dynamics during and after the build-up of neutralizing ions, via ionization of residual gas in the cooler. The design follows previous experiments at Fermilab as a verification case. We also discuss the relevance to EIC designs.

An accelerated test design for use with synchronous orbit. [on Ni-Cd cell degradation behavior

NASA Technical Reports Server (NTRS)

Mcdermott, P. P.; Vasanth, K. L.

1980-01-01

The Naval Weapons Support Center at Crane, Indiana has conducted a large scale accelerated test of 6.0 Ah Ni-Cd cells. Data from the Crane test have been used to develop an equation for the description of Ni-Cd cell behavior in geosynchronous orbit. This equation relates the anticipated time to failure for a cell in synchronous orbit to temperature and overcharge rate sustained by the cell during the light period. A test design is suggested which uses this equation for setting test parameters for future accelerated testing.

Development and Validation of Triarchic Construct Scales from the Psychopathic Personality Inventory

PubMed Central

Hall, Jason R.; Drislane, Laura E.; Patrick, Christopher J.; Morano, Mario; Lilienfeld, Scott O.; Poythress, Norman G.

2014-01-01

The Triarchic model of psychopathy describes this complex condition in terms of distinct phenotypic components of boldness, meanness, and disinhibition. Brief self-report scales designed specifically to index these psychopathy facets have thus far demonstrated promising construct validity. The present study sought to develop and validate scales for assessing facets of the Triarchic model using items from a well-validated existing measure of psychopathy—the Psychopathic Personality Inventory (PPI). A consensus rating approach was used to identify PPI items relevant to each Triarchic facet, and the convergent and discriminant validity of the resulting PPI-based Triarchic scales were evaluated in relation to multiple criterion variables (i.e., other psychopathy inventories, antisocial personality disorder features, personality traits, psychosocial functioning) in offender and non-offender samples. The PPI-based Triarchic scales showed good internal consistency and related to criterion variables in ways consistent with predictions based on the Triarchic model. Findings are discussed in terms of implications for conceptualization and assessment of psychopathy. PMID:24447280

Development and validation of Triarchic construct scales from the psychopathic personality inventory.

PubMed

Hall, Jason R; Drislane, Laura E; Patrick, Christopher J; Morano, Mario; Lilienfeld, Scott O; Poythress, Norman G

2014-06-01

The Triarchic model of psychopathy describes this complex condition in terms of distinct phenotypic components of boldness, meanness, and disinhibition. Brief self-report scales designed specifically to index these psychopathy facets have thus far demonstrated promising construct validity. The present study sought to develop and validate scales for assessing facets of the Triarchic model using items from a well-validated existing measure of psychopathy-the Psychopathic Personality Inventory (PPI). A consensus-rating approach was used to identify PPI items relevant to each Triarchic facet, and the convergent and discriminant validity of the resulting PPI-based Triarchic scales were evaluated in relation to multiple criterion variables (i.e., other psychopathy inventories, antisocial personality disorder features, personality traits, psychosocial functioning) in offender and nonoffender samples. The PPI-based Triarchic scales showed good internal consistency and related to criterion variables in ways consistent with predictions based on the Triarchic model. Findings are discussed in terms of implications for conceptualization and assessment of psychopathy.

Macrosorb Kieselguhr-agarose composite adsorbents. New tools for downstream process design and scale up. Scientific note.

PubMed

Bite, M G; Berezenko, S; Reed, F J; Derry, L

1988-08-01

Incompressible Macrosorb composite adsorbents, while retaining all the desirable properties of traditional agarose-based hydrogel media, overcome the operational limitations imposed by the use of soft hydrogels: They permit useful application of fast flow rates without restrictions on bed depth and they can be used in fluidized bed mode. Considerations which are important when contemplating scaled-up processing are discussed. A comparative cost estimate for a production process for extracting albumin from bovine serum in column equipment illustrates the various advantages which may be exploited when using a composite adsorbent in place of a conventional soft gel equivalent.

Micro-telerobotic applications for microsurgery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ford, W.E.; Morimoto, A.K.; Kozlowski, D.M.

MicroDexterity Systems Inc. and Sandia National Laboratories are collaborating on the design of a six degree-of-freedom surgeon-controlled micropositioner and a six degree-of-freedom surgeon-controlled master for use in microsurgery. A control system will provide the linkage between the force-reflecting master and micropositioner for force scaling, position scaling, and tremor filtering. The technologies developed by this project are expected to enhance the skills of surgeons, improve the success rates for existing microsurgical procedures, make new high-dexterity procedures possible, and ultimately reduce surgical costs by increasing the precision and speed of operations. This paper discusses the motivation, approach, and accomplishments to date.

Uncertainties of stormwater characteristics and removal rates of stormwater treatment facilities: implications for stormwater handling.

PubMed

Langeveld, J G; Liefting, H J; Boogaard, F C

2012-12-15

Stormwater runoff is a major contributor to the pollution of receiving waters. This study focuses at characterising stormwater in order to be able to determine the impact of stormwater on receiving waters and to be able to select the most appropriate stormwater handling strategy. The stormwater characterisation is based on determining site mean concentrations (SMCs) and their uncertainties as well as the treatability of stormwater by monitoring specific pollutants concentration levels (TSS, COD, BOD, TKN, TP, Pb, Cu, Zn, E.coli) at three full scale stormwater treatment facilities in Arnhem, the Netherlands. This has resulted in 106 storm events being monitored at the lamella settler, 59 at the high rate sand filter and 132 at the soil filter during the 2 year monitoring period. The stormwater characteristics in Arnhem in terms of SMCs for main pollutants TSS and COD and settling velocities differ from international data. This implies that decisions for stormwater handling made on international literature data will very likely be wrong due to assuming too high concentrations of pollutants and misjudgement of the treatability of stormwater. The removal rates monitored at the full scale treatment facilities are within the expected range, with the soil filter and the sand filter having higher removal rates than the lamella settler. The full scale pilots revealed the importance of incorporating gross solids removal in the design of stormwater treatment facilities, as the gross solids determine operation and maintenance requirements. Copyright © 2012 Elsevier Ltd. All rights reserved.

CosmoCalc: An Excel add-in for cosmogenic nuclide calculations

NASA Astrophysics Data System (ADS)

Vermeesch, Pieter

2007-08-01

As dating methods using Terrestrial Cosmogenic Nuclides (TCN) become more popular, the need arises for a general-purpose and easy-to-use data reduction software. The CosmoCalc Excel add-in calculates TCN production rate scaling factors (using Lal, Stone, Dunai, and Desilets methods); topographic, snow, and self-shielding factors; and exposure ages, erosion rates, and burial ages and visualizes the results on banana-style plots. It uses an internally consistent TCN production equation that is based on the quadruple exponential approach of Granger and Smith (2000). CosmoCalc was designed to be as user-friendly as possible. Although the user interface is extremely simple, the program is also very flexible, and nearly all default parameter values can be changed. To facilitate the comparison of different scaling factors, a set of converter tools is provided, allowing the user to easily convert cut-off rigidities to magnetic inclinations, elevations to atmospheric depths, and so forth. Because it is important to use a consistent set of scaling factors for the sample measurements and the production rate calibration sites, CosmoCalc defines the production rates implicitly, as a function of the original TCN concentrations of the calibration site. The program is best suited for 10Be, 26Al, 3He, and 21Ne calculations, although basic functionality for 36Cl and 14C is also provided. CosmoCalc can be downloaded along with a set of test data from http://cosmocalc.googlepages.com.

Pilot-scale treatment of atrazine production wastewater by UV/O3/ultrasound: Factor effects and system optimization.

PubMed

Jing, Liang; Chen, Bing; Wen, Diya; Zheng, Jisi; Zhang, Baiyu

2017-12-01

This study shed light on removing atrazine from pesticide production wastewater using a pilot-scale UV/O 3 /ultrasound flow-through system. A significant quadratic polynomial prediction model with an adjusted R 2 of 0.90 was obtained from central composite design with response surface methodology. The optimal atrazine removal rate (97.68%) was obtained at the conditions of 75 W UV power, 10.75 g h -1 O 3 flow rate and 142.5 W ultrasound power. A Monte Carlo simulation aided artificial neural networks model was further developed to quantify the importance of O 3 flow rate (40%), UV power (30%) and ultrasound power (30%). Their individual and interaction effects were also discussed in terms of reaction kinetics. UV and ultrasound could both enhance the decomposition of O 3 and promote hydroxyl radical (OH·) formation. Nonetheless, the dose of O 3 was the dominant factor and must be optimized because excess O 3 can react with OH·, thereby reducing the rate of atrazine degradation. The presence of other organic compounds in the background matrix appreciably inhibited the degradation of atrazine, while the effects of Cl - , CO 3 2- and HCO 3 - were comparatively negligible. It was concluded that the optimization of system performance using response surface methodology and neural networks would be beneficial for scaling up the treatment by UV/O 3 /ultrasound at industrial level. Copyright © 2017 Elsevier Ltd. All rights reserved.

The "Flexi-Chamber": A Novel Cost-Effective In Situ Respirometry Chamber for Coral Physiological Measurements.

PubMed

Camp, Emma F; Krause, Sophie-Louise; Santos, Lourianne M F; Naumann, Malik S; Kikuchi, Ruy K P; Smith, David J; Wild, Christian; Suggett, David J

2015-01-01

Coral reefs are threatened worldwide, with environmental stressors increasingly affecting the ability of reef-building corals to sustain growth from calcification (G), photosynthesis (P) and respiration (R). These processes support the foundation of coral reefs by directly influencing biogeochemical nutrient cycles and complex ecological interactions and therefore represent key knowledge required for effective reef management. However, metabolic rates are not trivial to quantify and typically rely on the use of cumbersome in situ respirometry chambers and/or the need to remove material and examine ex situ, thereby fundamentally limiting the scale, resolution and possibly the accuracy of the rate data. Here we describe a novel low-cost in situ respirometry bag that mitigates many constraints of traditional glass and plexi-glass incubation chambers. We subsequently demonstrate the effectiveness of our novel "Flexi-Chamber" approach via two case studies: 1) the Flexi-Chamber provides values of P, R and G for the reef-building coral Siderastrea cf. stellata collected from reefs close to Salvador, Brazil, which were statistically similar to values collected from a traditional glass respirometry vessel; and 2) wide-scale application of obtaining P, R and G rates for different species across different habitats to obtain inter- and intra-species differences. Our novel cost-effective design allows us to increase sampling scale of metabolic rate measurements in situ without the need for destructive sampling and thus significantly expands on existing research potential, not only for corals as we have demonstrated here, but also other important benthic groups.

Green infrastructure retrofits on residential parcels: Ecohydrologic modeling for stormwater design

NASA Astrophysics Data System (ADS)

Miles, B.; Band, L. E.

2014-12-01

To meet water quality goals stormwater utilities and not-for-profit watershed organizations in the U.S. are working with citizens to design and implement green infrastructure on residential land. Green infrastructure, as an alternative and complement to traditional (grey) stormwater infrastructure, has the potential to contribute to multiple ecosystem benefits including stormwater volume reduction, carbon sequestration, urban heat island mitigation, and to provide amenities to residents. However, in small (1-10-km2) medium-density urban watersheds with heterogeneous land cover it is unclear whether stormwater retrofits on residential parcels significantly contributes to reduce stormwater volume at the watershed scale. In this paper, we seek to improve understanding of how small-scale redistribution of water at the parcel scale as part of green infrastructure implementation affects urban water budgets and stormwater volume across spatial scales. As study sites we use two medium-density headwater watersheds in Baltimore, MD and Durham, NC. We develop ecohydrology modeling experiments to evaluate the effectiveness of redirecting residential rooftop runoff to un-altered pervious surfaces and to engineered rain gardens to reduce stormwater runoff. As baselines for these experiments, we performed field surveys of residential rooftop hydrologic connectivity to adjacent impervious surfaces, and found low rates of connectivity. Through simulations of pervasive adoption of downspout disconnection to un-altered pervious areas or to rain garden stormwater control measures (SCM) in these catchments, we find that most parcel-scale changes in stormwater fate are attenuated at larger spatial scales and that neither SCM alone is likely to provide significant changes in streamflow at the watershed scale.

Measuring health care workers' perceptions of what constitutes a compassionate organisation culture and working environment: Findings from a quantitative feasibility survey.

PubMed

McSherry, Robert; Pearce, Paddy

2018-03-01

Health care organisation cultures and working environments are highly complex, dynamic and constantly evolving settings. They significantly influence both the delivery and outcomes of care. Phase 1 quantitative findings are presented from a larger three phase feasibility study designed to develop and test a Cultural Health Check toolkit to support health care workers, patients and organisations in the provision of safe, compassionate and dignified care. A mixed methods approach was applied. The Cultural Health Check Healthcare Workers Questionnaire was distributed across two National Health Service Hospitals in England, UK. Both hospitals allocated two wards comprising of older people and surgical specialities. The newly devised Cultural Health Check Staff Rating Scale Version 1 questionnaire was distributed to 223 health care workers. Ninety eight responses were returned giving a response rate of 44%. The Cultural Health Check Staff Rating Scale Version 1 has a significant Cronbach alpha of .775; this reliability scaling is reflected in all 16 items in the scale. Exploratory factor analysis identified two significant factors "Professional Practice and Support" and "Workforce and Service Delivery." These factors according to health care workers significantly impact on the organisation culture and quality of care delivered by staff. The Cultural Health Check Staff Rating Scale Version 1 questionnaire is a newly validated measurement tool that could be used and applied to gauge health care workers perceptions of an organisations level of compassion. Historically we have focused on identifying how caring and compassionate nurses, doctors and related allied health professionals are. This turns the attention on employers of nurses and other related organisations. The questionnaire can be used to gauge the level of compassion with a health care organisation culture and working environment. Nurse managers and leaders should focus attention regarding how these two factors are supported and resourced in the future. © 2017 John Wiley & Sons Ltd.

Improved Design of Anaerobic Digesters for Household Biogas Production in Indonesia: One Cow, One Digester, and One Hour of Cooking per Day

PubMed Central

Usack, Joseph G.; Wiratni, Wiratni; Angenent, Largus T.

2014-01-01

A government-sponsored initiative in Indonesia to design and implement low-cost anaerobic digestion systems resulted in 21 full-scale systems with the aim to satisfy the cooking fuel demands of rural households owning at least one cow. The full-scale design consisted of a 0.3 m diameter PVC pipe, which was operated as a conventional plug-flow system. The system generated enough methane to power a cooking stove for ∼1 h. However, eventual clogging from solids accumulation inside the bioreactor proved to be a major drawback. Here, we improved the digester configuration to remedy clogging while maintaining system performance. Controlled experiments were performed using four 9-L laboratory-scale digesters operated at a temperature of 27 ± 1°C, a volatile solids loading rate of 2.0 g VS·L−1 ·day−1, and a 21-day hydraulic retention time. Two of the digesters were replicates of the original design (control digesters), while the other two digesters included internal mixing or effluent recycle (experimental digesters). The performance of each digester was compared based on methane yields, VS removal efficiencies, and steady-state solids concentrations during an operating period of 311 days. Statistical analyses revealed that internal mixing and effluent recycling resulted in reduced solids accumulation compared to the controls without diminishing methane yields or solids removal efficiencies. PMID:24715809

Detecting vegetation cover change on the summit of Cadillac Mountain using multi-temporal remote sensing datasets: 1979, 2001, and 2007.

PubMed

Kim, Min-Kook; Daigle, John J

2011-09-01

This study examines the efficacy of management strategies implemented in 2000 to reduce visitor-induced vegetation impact and enhance vegetation recovery at the summit loop trail on Cadillac Mountain at Acadia National Park, Maine. Using single-spectral high-resolution remote sensing datasets captured in 1979, 2001, and 2007, pre-classification change detection analysis techniques were applied to measure fractional vegetation cover changes between the time periods. This popular sub-alpine summit with low-lying vegetation and attractive granite outcroppings experiences dispersed visitor use away from the designated trail, so three pre-defined spatial scales (small, 0-30 m; medium, 0-60 m; and large, 0-90 m) were examined in the vicinity of the summit loop trail with visitor use (experimental site) and a site chosen nearby in a relatively pristine undisturbed area (control site) with similar spatial scales. Results reveal significant changes in terms of rates of vegetation impact between 1979 and 2001 extending out to 90 m from the summit loop trail with no management at the site. No significant differences were detected among three spatial zones (inner, 0-30 m; middle, 30-60 m; and outer, 60-90 m) at the experimental site, but all were significantly higher rates of impact compared to similar spatial scales at the control site (all p < 0.001). In contrast, significant changes in rates of recovery between 2001 and 2007 were observed in the medium and large spatial scales at the experimental site under management as compared to the control site (all p < 0.05). Also during this later period a higher rate of recovery was observed in the outer zone as compared to the inner zone at the experimental site (p < 0.05). The overall study results suggest a trend in the desired direction for the site and visitor management strategies designed to reduce vegetation impact and enhance vegetation recovery at the summit loop trail of Cadillac Mountain since 2000. However, the vegetation recovery has been rather minimal and did not reach the level of cover observed during the 1979 time period. In addition, the advantages and some limitations of using remote sensing technologies are discussed in detecting vegetation change in this setting and potential application to other recreation settings.

Factors predicting recovery from suicide in attempted suicide patients.

PubMed

Sun, Fan-Ko; Lu, Chu-Yun; Tseng, Yun Shan; Chiang, Chun-Ying

2017-12-01

The aim of this study was to explore the factors predicting suicide recovery and to provide guidance for healthcare professionals when caring for individuals who have attempted suicide. The high rate of suicide is a global health problem. Suicide prevention has become an important issue in contemporary mental health. Most suicide research has focused on suicidal prevention and care. There is a lack of research on the factors predicting suicidal recovery. A cross-sectional design was adopted. A correlational study with a purposive sample of 160 individuals from a suicide prevention centre in southern Taiwan was conducted. The questionnaires included the Brief Symptom Rating Scale-5, Suicidal Recovery Assessment Scale and Beck Hopelessness Scale. Descriptive statistics and linear regressions were used for the analysis. The mean age of the participants was 40.2 years. Many participants were striving to make changes to create a more stable and fulfilling life, had an improved recovery from suicide and had a good ability to adapt or solve problems. The linear regression showed that the Beck Hopelessness Scale scores (ß = -.551, p < .001) and Brief Symptom Rating Scale-5 (ß = -.218, p = .003) and past suicidal behaviour (ß = -.145, p = .008) were significant predictors of individuals' recovery from suicide. They accounted for 57.1% of the variance. Suicidal individuals who have a lower level of hopelessness, a better ability to cope with their mental condition and fewer past suicidal behaviours may better recover from suicide attempts. The nurses could use the results of this study to predict recovery from suicide in patients with attempted suicide. © 2017 John Wiley & Sons Ltd.

Safety of ipsapirone treatment compared with lorazepam: discontinuation effects.

PubMed Central

Busto, U E; Naranjo, C A; Bremner, K E; Peachey, J E; Bologa, M

1998-01-01

OBJECTIVE: To determine discontinuation effects of ipsapirone, a novel azapirone and partial 5-HTIA agonist that has anxiolytic effects clinically and has not caused dependence or withdrawal symptoms in animals, and to compare these effects with those of the benzodiazepine lorazepam, owing to concern about dependence or withdrawal symptoms following use of these drugs. DESIGN: Prospective, randomized, double-blind, placebo-controlled trial. SETTING: Outpatient and inpatient treatment. PARTICIPANTS: Sixty-five healthy male volunteers who had experience with sedative-hypnotics or anxiolytics and did not meet DSM-III-R criteria for abuse or dependence. INTERVENTIONS: Participants were randomized to receive ipsapirone 15 mg per day (n = 17), ipsapirone 22.5 mg per day (n = 16), lorazepam 3 mg per day (n = 16), or placebo (n = 16) as outpatients for 36 days (treatment) followed by single-blind placebo as inpatients for 3 days and as outpatients for 6 days (withdrawal). OUTCOME MEASURES: Hamilton Anxiety Rating Scale (HAM-A), Hamilton Depression Scale (HAM-D), Spielberger State Anxiety Scale, Sleep Quality Questionnaire, General Symptom Checklist, self-rated intoxication, Clinical Institute Withdrawal Assessment--Benzodiazepines (CIWA-Benzo), psychomotor testing and urine drug screen. RESULTS: Only 45 subjects completed the study; discontinuation rates did not significantly differ among treatment groups. At day 39, fewer and less severe symptoms (e.g., insomnia and fatigue) were found on the CIWA-Benzo scale after treatment with ipsapirone or placebo than after treatment with lorazepam (p < 0.05). Subjects reported longer sleep latency and poorer sleep quality after receiving lorazepam than after receiving ipsapirone or placebo. Scores on the HAM-D, Spielberger State Anxiety and HAM-A scales did not change from baseline. CONCLUSIONS: Withdrawal symptoms were detected after discontinuation of therapeutic doses of lorazepam. Significantly fewer symptoms were observed after withdrawal from anxiolytic doses of ipsapirone. PMID:9505058

Parkinson's Impulse-Control Scale for the Severity Rating of Impulse-Control Behaviors in Parkinson's Disease: A Semistructured Clinical Assessment Tool.

PubMed

Okai, David; Askey-Jones, Sally; Mack, Joel; Martin, Anne; Chaudhuri, Kallol Ray; Samuel, Michael; David, Anthony S; Brown, Richard G

2016-01-01

Impulse-control behaviors (ICBs) are increasingly recognized in Parkinson's disease (PD) as drug-related effects of dopaminergic mediation that occur in 15% to 35% of patients with PD. The authors describe the design and evaluation of a new, clinician-rated severity scale for the assessment of syndromal and subsyndromal forms of impulse-control disorders (ICDs), simple (punding) and complex (hobbyism) repetitive behaviors, and compulsive overuse of medication (dopamine dysregulation syndrome). The Parkinson's Impulse-Control Scale (PICS), the first PD-specific, semistructured interview to cover the full range of PD-related ICBs, is described along with initial evidence on its clinimetric properties including interrater reliability, discriminant validity and sensitivity to change. A convenience sample of PD patients with ICBs and those without were administered a semistructured interview (n = 92). The scale distinguished between those with and without clinically detected ICBs and between patients with syndromal ICD and subsyndromal ICB (receiver operating characteristic areas under the curve, 92%-95%). Cutoff values were suggested, and substantial agreement was reported on weighted kappa (Κ) values for clinician-clinician rating of severity (Κ = 0.92). Significant improvements were detected on the scale after a randomized controlled trial of cognitive-behavioral therapy and medication adjustment ( t [22] = 5.47; P < 0.001). The PICS appears to be a reliable measure of the full range of PD ICBs with good levels of interrater reliability. It may provide a useful measure to assess the severity of ICBs and monitor change in clinical and research settings; although, given the specialized centers used for recruitment of this sample, further psychometric evaluation is required.

Prevalence of Internet addiction and its association with social support and other related factors among adolescents in China.

PubMed

Wu, Xiao-Shuang; Zhang, Zhi-Hua; Zhao, Feng; Wang, Wen-Jing; Li, Yi-Feng; Bi, Linda; Qian, Zhen-Zhong; Lu, Shan-Shan; Feng, Fang; Hu, Cai-Yun; Gong, Feng-Feng; Sun, Ye-Huan

2016-10-01

A cross-sectional study design was applied amongst a random sample (n = 10158) of Chinese adolescents. Self-completed questionnaires, including demographic characteristics, Internet use situation, Youth Internet Addiction Test, Youth Social Support Rating Scale and Zung Self-rating Depression Scale were utilized to examine the study objectives. Among the study population, the prevalence rate of Internet addiction was 10.4%, with 1038 (10.2%) moderately and 21 (0.2%) severely addicted to the Internet. Results from the multivariate logistic regression analyses suggested that a variety of related factors have significant effects on Internet addiction (parental control, per capita annual household income, academic performance, the access to Internet, online activities). The correlation coefficients showed that Internet addiction was negatively correlated with social support and positively associated with depression. Social support had a significant negative predictive effect on Internet addiction. The mediating effect of depression between social support and Internet addiction was remarkable. Copyright © 2016 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.