Sample records for rcac require specific

  1. Retrospective Cost Adaptive Control with Concurrent Closed-Loop Identification

    NASA Astrophysics Data System (ADS)

    Sobolic, Frantisek M.

    Retrospective cost adaptive control (RCAC) is a discrete-time direct adaptive control algorithm for stabilization, command following, and disturbance rejection. RCAC is known to work on systems given minimal modeling information which is the leading numerator coefficient and any nonminimum-phase (NMP) zeros of the plant transfer function. This information is normally needed a priori and is key in the development of the filter, also known as the target model, within the retrospective performance variable. A novel approach to alleviate the need for prior modeling of both the leading coefficient of the plant transfer function as well as any NMP zeros is developed. The extension to the RCAC algorithm is the use of concurrent optimization of both the target model and the controller coefficients. Concurrent optimization of the target model and controller coefficients is a quadratic optimization problem in the target model and controller coefficients separately. However, this optimization problem is not convex as a joint function of both variables, and therefore nonconvex optimization methods are needed. Finally, insights within RCAC that include intercalated injection between the controller numerator and the denominator, unveil the workings of RCAC fitting a specific closed-loop transfer function to the target model. We exploit this interpretation by investigating several closed-loop identification architectures in order to extract this information for use in the target model.

  2. An Evaluation of the Rural Community Assistance Consortium (June 1971 through September 1972).

    ERIC Educational Resources Information Center

    Divita, Charles, Jr., Ed.; And Others

    The Rural Community Assistance Consortium (RCAC) was established to increase member schools' ability to attract and maintain funded programs and qualified resource personnel to upgrade human and community resources in rural areas. The RCAC consists of 15 predominantly black land-grant colleges and Tuskegee Institute in 15 southern and border…

  3. Evaluation of Rankine cycle air conditioning system hardware by computer simulation

    NASA Technical Reports Server (NTRS)

    Healey, H. M.; Clark, D.

    1978-01-01

    A computer program for simulating the performance of a variety of solar powered Rankine cycle air conditioning system components (RCACS) has been developed. The computer program models actual equipment by developing performance maps from manufacturers data and is capable of simulating off-design operation of the RCACS components. The program designed to be a subroutine of the Marshall Space Flight Center (MSFC) Solar Energy System Analysis Computer Program 'SOLRAD', is a complete package suitable for use by an occasional computer user in developing performance maps of heating, ventilation and air conditioning components.

  4. Complementation of a red-light-indifferent cyanobacterial mutant.

    PubMed Central

    Chiang, G G; Schaefer, M R; Grossman, A R

    1992-01-01

    Many cyanobacteria alter their phycobilisome composition in response to changes in light wavelength in a process termed complementary chromatic adaptation. Mutant strains FdR1 and FdR2 of the filamentous cyanobacterium Fremyella diplosiphon are characterized by aberrant chromatic adaptation. Instead of adjusting to different wavelengths of light, FdR1 and FdR2 behave as if they are always in green light; they do not respond to red light. We have previously reported complementation of FdR1 by conjugal transfer of a wild-type genomic library. The complementing DNA has now been localized by genetic analysis to a region on the rescued genomic subclone that contains a gene designated rcaC. This region of DNA is also able to complement FdR2. Southern blot analysis of genomic DNA from FdR1 and FdR2 indicates that these strains harbor DNA insertions within the rcaC sequence that may have resulted from the activity of transposable genetic elements. The predicted amino acid sequence of RcaC shares strong identity to response regulators of bacterial two-component regulatory systems. This relationship is discussed in the context of the signal-transduction pathway mediating regulation of genes encoding phycobilisome polypeptides during chromatic adaptation. Images PMID:1409650

  5. Experiencing reproductive concerns as a female cancer survivor is associated with depression.

    PubMed

    Gorman, Jessica R; Su, H Irene; Roberts, Samantha C; Dominick, Sally A; Malcarne, Vanessa L

    2015-03-15

    Young adult female cancer survivors have unmet reproductive concerns and informational needs that are associated with poorer quality of life. The purpose of this study was to examine the association between current reproductive concerns and moderate to severe depression among young survivors. This cross-sectional study included 200 female cancer survivors between the ages of 18 and 35 years who completed a Web-based survey measuring reproductive history, parenthood desires, reproductive concerns after cancer, and quality-of-life indicators. The mean age of the participants was 28 years (standard deviation, 4.4 years), and almost two-thirds were diagnosed within 5 years of survey completion. A multivariate logistic regression analysis controlling for education, duration of survivorship, and social support revealed an association between experiencing reproductive concerns and moderate to severe depression (odds ratio for each 5-unit increase in the Reproductive Concerns After Cancer [RCAC] score, 1.30; 95% confidence interval, 1.06-1.60). Among those with moderate to severe depression, 23% had high RCAC scores, whereas 6% of those with minimal to mild depression did (P < .001). A higher level of reproductive concerns was associated with greater odds of experiencing moderate to severe depression. Almost a quarter of survivors in this sample reported moderate to severe depression, and addressing reproductive concerns represents one potential area of intervention for improving the psychosocial health of young survivors. © 2014 American Cancer Society.

  6. Experiencing reproductive concerns as a female cancer survivor is associated with depression

    PubMed Central

    Gorman, Jessica R.; Su, H. Irene; Roberts, Samantha C.; Dominick, Sally A.; Malcarne, Vanessa L.

    2014-01-01

    Background Young adult female cancer survivors have unmet reproductive concerns and informational needs that are associated with poorer quality of life. The purpose of this study was to examine the association between current reproductive concerns and moderate to severe depression among young survivors. Methods This cross-sectional study includes 200 female cancer survivors between the ages of 18 and 35 years who completed a web-based survey measuring reproductive history, parenthood desires, reproductive concerns after cancer, and quality of life indicators. Results The mean age of participants was 28 years (SD = 4.4) and almost two-thirds were diagnosed within 5 years of completing the survey. Multivariable logistic regression analysis controlling for education, duration of survivorship, and social support revealed an association between experiencing reproductive concerns and moderate to severe depression (OR = 1.30, 95% CI = 1.06–1.60 for each 5 unit increase in RCAC score). Of those with moderate to severe depression, 23% had high RCAC scores as compared to 6% of those with minimal to mild depression (p < 0.001). Conclusion A higher level of reproductive concerns was associated with greater odds of experiencing moderate to severe depression. Almost a quarter of survivors in this sample reported moderate to severe depression, and addressing reproductive concerns represents one potential area of intervention to improve the psychosocial health of young survivors. PMID:25377593

  7. Healthcare Coverage and Disability Evaluation for Reserve Component Personnel: Research for the 11th Quadrennial Review of Military Compensation

    DTIC Science & Technology

    2012-01-01

    personnel (E-5–E-9), and all warrant and commis- sioned officers. There is some variation across the services, especially for junior enlisted...the PTSD cases in 2007 and 2008. After the policy memo directing a minimum tempo - rary rating of 50 percent, the ratings for cases involving PTSD...dles the medical evaluation (these results are given in the Appendix). The regression analysis controls for this variation , so the RC-AC difference

  8. Accurate Classification of RNA Structures Using Topological Fingerprints

    PubMed Central

    Li, Kejie; Gribskov, Michael

    2016-01-01

    While RNAs are well known to possess complex structures, functionally similar RNAs often have little sequence similarity. While the exact size and spacing of base-paired regions vary, functionally similar RNAs have pronounced similarity in the arrangement, or topology, of base-paired stems. Furthermore, predicted RNA structures often lack pseudoknots (a crucial aspect of biological activity), and are only partially correct, or incomplete. A topological approach addresses all of these difficulties. In this work we describe each RNA structure as a graph that can be converted to a topological spectrum (RNA fingerprint). The set of subgraphs in an RNA structure, its RNA fingerprint, can be compared with the fingerprints of other RNA structures to identify and correctly classify functionally related RNAs. Topologically similar RNAs can be identified even when a large fraction, up to 30%, of the stems are omitted, indicating that highly accurate structures are not necessary. We investigate the performance of the RNA fingerprint approach on a set of eight highly curated RNA families, with diverse sizes and functions, containing pseudoknots, and with little sequence similarity–an especially difficult test set. In spite of the difficult test set, the RNA fingerprint approach is very successful (ROC AUC > 0.95). Due to the inclusion of pseudoknots, the RNA fingerprint approach both covers a wider range of possible structures than methods based only on secondary structure, and its tolerance for incomplete structures suggests that it can be applied even to predicted structures. Source code is freely available at https://github.rcac.purdue.edu/mgribsko/XIOS_RNA_fingerprint. PMID:27755571

  9. AptRank: an adaptive PageRank model for protein function prediction on   bi-relational graphs.

    PubMed

    Jiang, Biaobin; Kloster, Kyle; Gleich, David F; Gribskov, Michael

    2017-06-15

    Diffusion-based network models are widely used for protein function prediction using protein network data and have been shown to outperform neighborhood-based and module-based methods. Recent studies have shown that integrating the hierarchical structure of the Gene Ontology (GO) data dramatically improves prediction accuracy. However, previous methods usually either used the GO hierarchy to refine the prediction results of multiple classifiers, or flattened the hierarchy into a function-function similarity kernel. No study has taken the GO hierarchy into account together with the protein network as a two-layer network model. We first construct a Bi-relational graph (Birg) model comprised of both protein-protein association and function-function hierarchical networks. We then propose two diffusion-based methods, BirgRank and AptRank, both of which use PageRank to diffuse information on this two-layer graph model. BirgRank is a direct application of traditional PageRank with fixed decay parameters. In contrast, AptRank utilizes an adaptive diffusion mechanism to improve the performance of BirgRank. We evaluate the ability of both methods to predict protein function on yeast, fly and human protein datasets, and compare with four previous methods: GeneMANIA, TMC, ProteinRank and clusDCA. We design four different validation strategies: missing function prediction, de novo function prediction, guided function prediction and newly discovered function prediction to comprehensively evaluate predictability of all six methods. We find that both BirgRank and AptRank outperform the previous methods, especially in missing function prediction when using only 10% of the data for training. The MATLAB code is available at https://github.rcac.purdue.edu/mgribsko/aptrank . gribskov@purdue.edu. Supplementary data are available at Bioinformatics online. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

  10. Fertility information needs and concerns post-treatment contribute to lowered quality of life among young adult female cancer survivors.

    PubMed

    Benedict, Catherine; Thom, Bridgette; Friedman, Danielle N; Pottenger, Elaine; Raghunathan, Nirupa; Kelvin, Joanne F

    2018-07-01

    Cancer treatment may lead to premature menopause and infertility. Young adult female cancer survivors (YAFCS) are often concerned about their fertility and future family-building options, but research is limited on how concerns may affect more general quality of life (QOL) domains. This study examined how fertility factors relate to QOL among YAFCS who received gonadotoxic therapy. A national sample of YAFCS completed an online, anonymous survey. The survey included investigator-designed questions about perceived fertility information needs (five items; Cronbach's α = .83) and general QOL (four items; α = .89), the Reproductive Concerns after Cancer Scale (RCACS) and Decisional Conflict Scale (DCS). Analyses included Pearson's correlation, t tests, and stepwise regression. Participants (N = 314) were an average of 30 years old (SD = 4.1) and 5 years (SD = 5.4) post-treatment; 31% reported being infertile and 19% had undergone fertility preservation (FP). Overall, QOL was relatively high (M = 7.3, SD = 1.9, range 0-10) and did not vary by fertility status (t[272] = .743, p = .46), prior FP (t[273] = .53, p = .55) or sociodemographic/clinical factors (p's > .05) except socioeconomic indicators (p's < .05).In separate models, greater unmet fertility information needs (β = - .19, p = .004) and, among fertile women, greater reproductive concerns (β = - .26, p = .001) related to lower QOL. Among fertile women without prior FP, greater decisional distress about future FP related to lower QOL (β = - .19, p = .03). These preliminary findings suggest that unaddressed fertility information needs, concerns, and decision distress may affect general QOL among post-treatment YAFCS who hope to have children in the future. Future work should identify ways to optimally incorporate fertility counseling and support resources into survivorship care programs, including referrals to reproductive specialists as appropriate.

  11. 46 CFR 63.20-1 - Specific control system requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Specific control system requirements. 63.20-1 Section 63... AUXILIARY BOILERS Additional Control System Requirements § 63.20-1 Specific control system requirements. In... following requirements apply for specific control systems: (a) Primary safety control system. Following...

  12. 46 CFR 63.20-1 - Specific control system requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Specific control system requirements. 63.20-1 Section 63... AUXILIARY BOILERS Additional Control System Requirements § 63.20-1 Specific control system requirements. In... following requirements apply for specific control systems: (a) Primary safety control system. Following...

  13. ARIES: Acquisition of Requirements and Incremental Evolution of Specifications

    NASA Technical Reports Server (NTRS)

    Roberts, Nancy A.

    1993-01-01

    This paper describes a requirements/specification environment specifically designed for large-scale software systems. This environment is called ARIES (Acquisition of Requirements and Incremental Evolution of Specifications). ARIES provides assistance to requirements analysts for developing operational specifications of systems. This development begins with the acquisition of informal system requirements. The requirements are then formalized and gradually elaborated (transformed) into formal and complete specifications. ARIES provides guidance to the user in validating formal requirements by translating them into natural language representations and graphical diagrams. ARIES also provides ways of analyzing the specification to ensure that it is correct, e.g., testing the specification against a running simulation of the system to be built. Another important ARIES feature, especially when developing large systems, is the sharing and reuse of requirements knowledge. This leads to much less duplication of effort. ARIES combines all of its features in a single environment that makes the process of capturing a formal specification quicker and easier.

  14. Improving Reliability of Spectrum Analysis for Software Quality Requirements Using TCM

    NASA Astrophysics Data System (ADS)

    Kaiya, Haruhiko; Tanigawa, Masaaki; Suzuki, Shunichi; Sato, Tomonori; Osada, Akira; Kaijiri, Kenji

    Quality requirements are scattered over a requirements specification, thus it is hard to measure and trace such quality requirements to validate the specification against stakeholders' needs. We proposed a technique called “spectrum analysis for quality requirements” which enabled analysts to sort a requirements specification to measure and track quality requirements in the specification. In the same way as a spectrum in optics, a quality spectrum of a specification shows a quantitative feature of the specification with respect to quality. Therefore, we can compare a specification of a system to another one with respect to quality. As a result, we can validate such a specification because we can check whether the specification has common quality features and know its specific features against specifications of existing similar systems. However, our first spectrum analysis for quality requirements required a lot of effort and knowledge of a problem domain and it was hard to reuse such knowledge to reduce the effort. We thus introduce domain knowledge called term-characteristic map (TCM) to reuse the knowledge for our quality spectrum analysis. Through several experiments, we evaluate our spectrum analysis, and main finding are as follows. First, we confirmed specifications of similar systems have similar quality spectra. Second, results of spectrum analysis using TCM are objective, i.e., different analysts can generate almost the same spectra when they analyze the same specification.

  15. Structuring Formal Requirements Specifications for Reuse and Product Families

    NASA Technical Reports Server (NTRS)

    Heimdahl, Mats P. E.

    2001-01-01

    In this project we have investigated how formal specifications should be structured to allow for requirements reuse, product family engineering, and ease of requirements change, The contributions of this work include (1) a requirements specification methodology specifically targeted for critical avionics applications, (2) guidelines for how to structure state-based specifications to facilitate ease of change and reuse, and (3) examples from the avionics domain demonstrating the proposed approach.

  16. Structured representation for requirements and specifications

    NASA Technical Reports Server (NTRS)

    Cohen, Gerald C.; Fisher, Gene; Frincke, Deborah; Wolber, Dave

    1991-01-01

    This document was generated in support of NASA contract NAS1-18586, Design and Validation of Digital Flight Control Systems suitable for Fly-By-Wire Applications, Task Assignment 2. Task 2 is associated with a formal representation of requirements and specifications. In particular, this document contains results associated with the development of a Wide-Spectrum Requirements Specification Language (WSRSL) that can be used to express system requirements and specifications in both stylized and formal forms. Included with this development are prototype tools to support the specification language. In addition a preliminary requirements specification methodology based on the WSRSL has been developed. Lastly, the methodology has been applied to an Advanced Subsonic Civil Transport Flight Control System.

  17. A discussion of higher order software concepts as they apply to functional requirements and specifications. [space shuttles and guidance

    NASA Technical Reports Server (NTRS)

    Hamilton, M.

    1973-01-01

    The entry guidance software functional requirements (requirements design phase), its architectural requirements (specifications design phase), and the entry guidance software verified code are discussed. It was found that the proper integration of designs at both the requirements and specifications levels are of high priority consideration.

  18. From Goal-Oriented Requirements to Event-B Specifications

    NASA Technical Reports Server (NTRS)

    Aziz, Benjamin; Arenas, Alvaro E.; Bicarregui, Juan; Ponsard, Christophe; Massonet, Philippe

    2009-01-01

    In goal-oriented requirements engineering methodologies, goals are structured into refinement trees from high-level system-wide goals down to fine-grained requirements assigned to specific software/ hardware/human agents that can realise them. Functional goals assigned to software agents need to be operationalised into specification of services that the agent should provide to realise those requirements. In this paper, we propose an approach for operationalising requirements into specifications expressed in the Event-B formalism. Our approach has the benefit of aiding software designers by bridging the gap between declarative requirements and operational system specifications in a rigorous manner, enabling powerful correctness proofs and allowing further refinements down to the implementation level. Our solution is based on verifying that a consistent Event-B machine exhibits properties corresponding to requirements.

  19. Tools reference manual for a Requirements Specification Language (RSL), version 2.0

    NASA Technical Reports Server (NTRS)

    Fisher, Gene L.; Cohen, Gerald C.

    1993-01-01

    This report describes a general-purpose Requirements Specification Language, RSL. The purpose of RSL is to specify precisely the external structure of a mechanized system and to define requirements that the system must meet. A system can be comprised of a mixture of hardware, software, and human processing elements. RSL is a hybrid of features found in several popular requirements specification languages, such as SADT (Structured Analysis and Design Technique), PSL (Problem Statement Language), and RMF (Requirements Modeling Framework). While languages such as these have useful features for structuring a specification, they generally lack formality. To overcome the deficiencies of informal requirements languages, RSL has constructs for formal mathematical specification. These constructs are similar to those found in formal specification languages such as EHDM (Enhanced Hierarchical Development Methodology), Larch, and OBJ3.

  20. 40 CFR 166.32 - Reporting and recordkeeping requirements for specific, quarantine, and public health exemptions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... requirements for specific, quarantine, and public health exemptions. 166.32 Section 166.32 Protection of... AGENCIES FOR USE OF PESTICIDES UNDER EMERGENCY CONDITIONS Specific, Quarantine, and Public Health Exemptions § 166.32 Reporting and recordkeeping requirements for specific, quarantine, and public health...

  1. 40 CFR 166.32 - Reporting and recordkeeping requirements for specific, quarantine, and public health exemptions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... requirements for specific, quarantine, and public health exemptions. 166.32 Section 166.32 Protection of... AGENCIES FOR USE OF PESTICIDES UNDER EMERGENCY CONDITIONS Specific, Quarantine, and Public Health Exemptions § 166.32 Reporting and recordkeeping requirements for specific, quarantine, and public health...

  2. 40 CFR 166.32 - Reporting and recordkeeping requirements for specific, quarantine, and public health exemptions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... requirements for specific, quarantine, and public health exemptions. 166.32 Section 166.32 Protection of... AGENCIES FOR USE OF PESTICIDES UNDER EMERGENCY CONDITIONS Specific, Quarantine, and Public Health Exemptions § 166.32 Reporting and recordkeeping requirements for specific, quarantine, and public health...

  3. 40 CFR 166.32 - Reporting and recordkeeping requirements for specific, quarantine, and public health exemptions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... requirements for specific, quarantine, and public health exemptions. 166.32 Section 166.32 Protection of... AGENCIES FOR USE OF PESTICIDES UNDER EMERGENCY CONDITIONS Specific, Quarantine, and Public Health Exemptions § 166.32 Reporting and recordkeeping requirements for specific, quarantine, and public health...

  4. 40 CFR 166.32 - Reporting and recordkeeping requirements for specific, quarantine, and public health exemptions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... requirements for specific, quarantine, and public health exemptions. 166.32 Section 166.32 Protection of... AGENCIES FOR USE OF PESTICIDES UNDER EMERGENCY CONDITIONS Specific, Quarantine, and Public Health Exemptions § 166.32 Reporting and recordkeeping requirements for specific, quarantine, and public health...

  5. 49 CFR 178.348-1 - General requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Specifications for Containers for Motor Vehicle Transportation § 178.348-1 General requirements. (a) Each specification DOT 412 cargo tank motor vehicle must conform to the general design and construction requirements in § 178.345 in addition to the specific requirements of this section. (b) The MAWP of each cargo...

  6. Knowledge-based requirements analysis for automating software development

    NASA Technical Reports Server (NTRS)

    Markosian, Lawrence Z.

    1988-01-01

    We present a new software development paradigm that automates the derivation of implementations from requirements. In this paradigm, informally-stated requirements are expressed in a domain-specific requirements specification language. This language is machine-understable and requirements expressed in it are captured in a knowledge base. Once the requirements are captured, more detailed specifications and eventually implementations are derived by the system using transformational synthesis. A key characteristic of the process is that the required human intervention is in the form of providing problem- and domain-specific engineering knowledge, not in writing detailed implementations. We describe a prototype system that applies the paradigm in the realm of communication engineering: the prototype automatically generates implementations of buffers following analysis of the requirements on each buffer.

  7. Atmospheric, Magnetospheric and Plasmas in space (AMPS) spacelab payload definition study. Volume 4. Part 1, AMPS program specification

    NASA Technical Reports Server (NTRS)

    Keeley, J. T.

    1976-01-01

    The AMPS Program Specification delineates the AMPS Program requirements consistent with the resources defined in the AMPS Project Plan. All subsidiary specifications and requirements shall conform to the requirements presented. The requirements hierarchy for the AMPS program is illustrated. A brief description of each of the requirements documents and their intended use is provided.

  8. 16 CFR 1210.15 - Specifications.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR CIGARETTE LIGHTERS Certification Requirements § 1210.15 Specifications. (a) Requirement... described in a written product specification. (Section 1210.4(c) requires that six surrogate lighters be...

  9. 10 CFR 40.34 - Special requirements for issuance of specific licenses.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Special requirements for issuance of specific licenses. 40.34 Section 40.34 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF SOURCE MATERIAL License Applications § 40.34 Special requirements for issuance of specific licenses. (a) An application for a specific...

  10. Cultural Competency Training Requirements in Graduate Medical Education

    PubMed Central

    Ambrose, Adrian Jacques H.; Lin, Susan Y.; Chun, Maria B. J.

    2013-01-01

    Background Cultural competency is an important skill that prepares physicians to care for patients from diverse backgrounds. Objective We reviewed Accreditation Council for Graduate Medical Education (ACGME) program requirements and relevant documents from the ACGME website to evaluate competency requirements across specialties. Methods The program requirements for each specialty and its subspecialties were reviewed from December 2011 through February 2012. The review focused on the 3 competency domains relevant to culturally competent care: professionalism, interpersonal and communication skills, and patient care. Specialty and subspecialty requirements were assigned a score between 0 and 3 (from least specific to most specific). Given the lack of a standardized cultural competence rating system, the scoring was based on explicit mention of specific keywords. Results A majority of program requirements fell into the low- or no-specificity score (1 or 0). This included 21 core specialties (leading to primary board certification) program requirements (78%) and 101 subspecialty program requirements (79%). For all specialties, cultural competency elements did not gravitate toward any particular competency domain. Four of 5 primary care program requirements (pediatrics, obstetrics-gynecology, family medicine, and psychiatry) acquired the high-specificity score of 3, in comparison to only 1 of 22 specialty care program requirements (physical medicine and rehabilitation). Conclusions The degree of specificity, as judged by use of keywords in 3 competency domains, in ACGME requirements regarding cultural competency is highly variable across specialties and subspecialties. Greater specificity in requirements is expected to benefit the acquisition of cultural competency in residents, but this has not been empirically tested. PMID:24404264

  11. UML activity diagrams in requirements specification of logic controllers

    NASA Astrophysics Data System (ADS)

    Grobelna, Iwona; Grobelny, Michał

    2015-12-01

    Logic controller specification can be prepared using various techniques. One of them is the wide understandable and user-friendly UML language and its activity diagrams. Using formal methods during the design phase increases the assurance that implemented system meets the project requirements. In the approach we use the model checking technique to formally verify a specification against user-defined behavioral requirements. The properties are usually defined as temporal logic formulas. In the paper we propose to use UML activity diagrams in requirements definition and then to formalize them as temporal logic formulas. As a result, UML activity diagrams can be used both for logic controller specification and for requirements definition, what simplifies the specification and verification process.

  12. Reference manual for a Requirements Specification Language (RSL), version 2.0

    NASA Technical Reports Server (NTRS)

    Fisher, Gene L.; Cohen, Gerald C.

    1993-01-01

    This report is a Reference Manual for a general-purpose Requirements Specification Language, RSL. The purpose of RSL is to specify precisely the external structure of a mechanized system and to define requirements that the system must meet. A system can be comprised of a mixture of hardware, software, and human processing elements. RSL is a hybrid of features found in several popular requirements specification languages and includes constructs for formal mathematical specification.

  13. Sharing data between mobile devices, connected vehicles, and infrastructure task 3: system requirements specifications (SyRS) final.

    DOT National Transportation Integrated Search

    2016-07-14

    This report describes the system requirements specifications (SyRS) for the use of mobile devices in a connected vehicle environment. Specifically, it defines the different types of requirements (functional, interface, performance, security, data, an...

  14. Development of simulation computer complex specification

    NASA Technical Reports Server (NTRS)

    1973-01-01

    The Training Simulation Computer Complex Study was one of three studies contracted in support of preparations for procurement of a shuttle mission simulator for shuttle crew training. The subject study was concerned with definition of the software loads to be imposed on the computer complex to be associated with the shuttle mission simulator and the development of procurement specifications based on the resulting computer requirements. These procurement specifications cover the computer hardware and system software as well as the data conversion equipment required to interface the computer to the simulator hardware. The development of the necessary hardware and software specifications required the execution of a number of related tasks which included, (1) simulation software sizing, (2) computer requirements definition, (3) data conversion equipment requirements definition, (4) system software requirements definition, (5) a simulation management plan, (6) a background survey, and (7) preparation of the specifications.

  15. 24 CFR 1003.302 - Project specific threshold requirements.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 4 2014-04-01 2014-04-01 false Project specific threshold requirements. 1003.302 Section 1003.302 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN... Purpose Grant Application and Selection Process § 1003.302 Project specific threshold requirements. (a...

  16. [Definition and specification requirements for PAC-systems (picture archiving and communication system). A performance index with reference to the standard "IEEE Recommended Practice for Software Requirement Specifications"].

    PubMed

    König, H; Klose, K J

    1999-04-01

    The formulation of requirements is necessary to control the goals of a PACS project. Furthermore, in this way, the scope of functionality necessary to support radiological working processes becomes clear. Definitions of requirements and specification are formulated independently of systems according to the IEEE standard "Recommended Practice for Software Requirements Specifications". Definitions are given in the Request for Information, specifications in the Request for Proposal. Functional and non-functional requirements are distinguished. The solutions are rated with respect to scope, appropriateness and quality of implementation. A PACS checklist was created according to the methods described above. It is published on the homepage of the "Arbeitsgemeinschaft Informationstechnologie" (AGIT) within the "Deutsche Röntgengesellschaft" (DRG) (http://www.uni-marburg.de/mzr/agit). The checklist provides a discussion forum which should contribute to an agreement on accepted basic PACS functionalities.

  17. 10 CFR 810.12 - Information required in an application for specific authorization.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Information required in an application for specific authorization. 810.12 Section 810.12 Energy DEPARTMENT OF ENERGY ASSISTANCE TO FOREIGN ATOMIC ENERGY ACTIVITIES § 810.12 Information required in an application for specific authorization. Each application shall...

  18. 10 CFR 810.12 - Information required in an application for specific authorization.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Information required in an application for specific authorization. 810.12 Section 810.12 Energy DEPARTMENT OF ENERGY ASSISTANCE TO FOREIGN ATOMIC ENERGY ACTIVITIES § 810.12 Information required in an application for specific authorization. Each application shall...

  19. 10 CFR 810.12 - Information required in an application for specific authorization.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Information required in an application for specific authorization. 810.12 Section 810.12 Energy DEPARTMENT OF ENERGY ASSISTANCE TO FOREIGN ATOMIC ENERGY ACTIVITIES § 810.12 Information required in an application for specific authorization. Each application shall...

  20. 10 CFR 810.12 - Information required in an application for specific authorization.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Information required in an application for specific authorization. 810.12 Section 810.12 Energy DEPARTMENT OF ENERGY ASSISTANCE TO FOREIGN ATOMIC ENERGY ACTIVITIES § 810.12 Information required in an application for specific authorization. Each application shall...

  1. 10 CFR 810.12 - Information required in an application for specific authorization.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Information required in an application for specific authorization. 810.12 Section 810.12 Energy DEPARTMENT OF ENERGY ASSISTANCE TO FOREIGN ATOMIC ENERGY ACTIVITIES § 810.12 Information required in an application for specific authorization. Each application shall...

  2. 40 CFR 53.51 - Demonstration of compliance with design specifications and manufacturing and test requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... compliance with design specifications and manufacturing and test requirements. (a) Overview. (1) Paragraphs... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Demonstration of compliance with design specifications and manufacturing and test requirements. 53.51 Section 53.51 Protection of Environment...

  3. 30 CFR 23.7 - Specific requirements for approval.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., EVALUATION, AND APPROVAL OF MINING PRODUCTS TELEPHONES AND SIGNALING DEVICES § 23.7 Specific requirements for... apply. (g) Line powered telephones and signaling devices or systems shall be equipped with standby power... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Specific requirements for approval. 23.7...

  4. 30 CFR 23.7 - Specific requirements for approval.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., EVALUATION, AND APPROVAL OF MINING PRODUCTS TELEPHONES AND SIGNALING DEVICES § 23.7 Specific requirements for... apply. (g) Line powered telephones and signaling devices or systems shall be equipped with standby power... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Specific requirements for approval. 23.7...

  5. 30 CFR 23.7 - Specific requirements for approval.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., EVALUATION, AND APPROVAL OF MINING PRODUCTS TELEPHONES AND SIGNALING DEVICES § 23.7 Specific requirements for... apply. (g) Line powered telephones and signaling devices or systems shall be equipped with standby power... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Specific requirements for approval. 23.7...

  6. 49 CFR 178.345-1 - General requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...) All specification requirements are minimum requirements. (c) Definitions. See § 178.320(a) for the... flange, or by a fillet weld joining the tank shell to a flange shaped to fit the shell contour. (d) A... be constructed with the cargo tanks made to the same specification or to different specifications...

  7. 40 CFR 86.1506 - Equipment required and specifications; overview.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... specifications appear in §§ 86.1509 through 86.1511. (2) Fuel and analytical tests. Fuel requirements for idle... Test Procedures § 86.1506 Equipment required and specifications; overview. (a) This subpart contains procedures for performing idle exhaust emission tests on Otto-cycle heavy-duty engines and Otto-cycle light...

  8. 40 CFR 86.1506 - Equipment required and specifications; overview.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... specifications appear in §§ 86.1509 through 86.1511. (2) Fuel and analytical tests. Fuel requirements for idle... Test Procedures § 86.1506 Equipment required and specifications; overview. (a) This subpart contains procedures for performing idle exhaust emission tests on Otto-cycle heavy-duty engines and Otto-cycle light...

  9. 40 CFR 86.1506 - Equipment required and specifications; overview.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... specifications appear in §§ 86.1509 through 86.1511. (2) Fuel and analytical tests. Fuel requirements for idle... Test Procedures § 86.1506 Equipment required and specifications; overview. (a) This subpart contains procedures for performing idle exhaust emission tests on Otto-cycle heavy-duty engines and Otto-cycle light...

  10. 30 CFR 19.6 - Specific requirements for approval.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Specific requirements for approval. 19.6 Section 19.6 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC CAP LAMPS § 19.6 Specific requirements for approval. (a...

  11. 47 CFR 95.1121 - Specific requirements for wireless medical telemetry devices operating in the 1395-1400 and 1427...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 5 2012-10-01 2012-10-01 false Specific requirements for wireless medical... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PERSONAL RADIO SERVICES Wireless Medical Telemetry Service (WMTS) General Provisions § 95.1121 Specific requirements for...

  12. 78 FR 47015 - Software Requirement Specifications for Digital Computer Software Used in Safety Systems of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-02

    ... NUCLEAR REGULATORY COMMISSION [NRC-2012-0195] Software Requirement Specifications for Digital Computer Software Used in Safety Systems of Nuclear Power Plants AGENCY: Nuclear Regulatory Commission... issuing a revised regulatory guide (RG), revision 1 of RG 1.172, ``Software Requirement Specifications for...

  13. 46 CFR 127.110 - Plans and specifications required for new construction.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...) General Arrangement Plans. (3) Safety Plan (Fire-Control Plan), for OCMI review and approval. (b) Hull... 46 Shipping 4 2014-10-01 2014-10-01 false Plans and specifications required for new construction... SUPPLY VESSELS CONSTRUCTION AND ARRANGEMENTS Plan Approval § 127.110 Plans and specifications required...

  14. 46 CFR 127.110 - Plans and specifications required for new construction.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...) General Arrangement Plans. (3) Safety Plan (Fire-Control Plan), for OCMI review and approval. (b) Hull... 46 Shipping 4 2012-10-01 2012-10-01 false Plans and specifications required for new construction... SUPPLY VESSELS CONSTRUCTION AND ARRANGEMENTS Plan Approval § 127.110 Plans and specifications required...

  15. 46 CFR 127.110 - Plans and specifications required for new construction.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...) General Arrangement Plans. (3) Safety Plan (Fire-Control Plan), for OCMI review and approval. (b) Hull... 46 Shipping 4 2013-10-01 2013-10-01 false Plans and specifications required for new construction... SUPPLY VESSELS CONSTRUCTION AND ARRANGEMENTS Plan Approval § 127.110 Plans and specifications required...

  16. Initiating Formal Requirements Specifications with Object-Oriented Models

    NASA Technical Reports Server (NTRS)

    Ampo, Yoko; Lutz, Robyn R.

    1994-01-01

    This paper reports results of an investigation into the suitability of object-oriented models as an initial step in developing formal specifications. The requirements for two critical system-level software modules were used as target applications. It was found that creating object-oriented diagrams prior to formally specifying the requirements enhanced the accuracy of the initial formal specifications and reduced the effort required to produce them. However, the formal specifications incorporated some information not found in the object-oriented diagrams, such as higher-level strategy or goals of the software.

  17. Electrical Bonding: A Survey of Requirement, Methods, and Specifications

    NASA Technical Reports Server (NTRS)

    Evans, R. W.

    1998-01-01

    This document provides information helpful to engineers imposing electrical bonding requirements, reviewing waiver requests, or modifying specifications on various space programs. Electrical bonding specifications and some of the processes used in the United States have been reviewed. This document discusses the specifications, the types of bonds, the intent of each, and the basic requirements where possible. Additional topics discussed are resistance versus impedance, bond straps, corrosion, finishes, and special applications.

  18. Requirements Specification Document

    DOT National Transportation Integrated Search

    1996-04-26

    The System Definition Document identifies the top level processes, data flows, : and system controls for the Gary-Chicago-Milwaukee (GCM) Corridor Transportation Information Center (C-TIC). This Requirements Specification establishes the requirements...

  19. Requirements Specification Language (RSL) and supporting tools

    NASA Technical Reports Server (NTRS)

    Frincke, Deborah; Wolber, Dave; Fisher, Gene; Cohen, Gerald C.

    1992-01-01

    This document describes a general purpose Requirement Specification Language (RSL). RSL is a hybrid of features found in several popular requirement specification languages. The purpose of RSL is to describe precisely the external structure of a system comprised of hardware, software, and human processing elements. To overcome the deficiencies of informal specification languages, RSL includes facilities for mathematical specification. Two RSL interface tools are described. The Browser view contains a complete document with all details of the objects and operations. The Dataflow view is a specialized, operation-centered depiction of a specification that shows how specified operations relate in terms of inputs and outputs.

  20. Automata learning algorithms and processes for providing more complete systems requirements specification by scenario generation, CSP-based syntax-oriented model construction, and R2D2C system requirements transformation

    NASA Technical Reports Server (NTRS)

    Margaria, Tiziana (Inventor); Hinchey, Michael G. (Inventor); Rouff, Christopher A. (Inventor); Rash, James L. (Inventor); Steffen, Bernard (Inventor)

    2010-01-01

    Systems, methods and apparatus are provided through which in some embodiments, automata learning algorithms and techniques are implemented to generate a more complete set of scenarios for requirements based programming. More specifically, a CSP-based, syntax-oriented model construction, which requires the support of a theorem prover, is complemented by model extrapolation, via automata learning. This may support the systematic completion of the requirements, the nature of the requirement being partial, which provides focus on the most prominent scenarios. This may generalize requirement skeletons by extrapolation and may indicate by way of automatically generated traces where the requirement specification is too loose and additional information is required.

  1. 47 CFR 95.1121 - Specific requirements for wireless medical telemetry devices operating in the 1395-1400 and 1427...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 5 2011-10-01 2011-10-01 false Specific requirements for wireless medical... SERVICES Wireless Medical Telemetry Service (WMTS) General Provisions § 95.1121 Specific requirements for wireless medical telemetry devices operating in the 1395-1400 and 1427-1432 MHz bands. Due to the critical...

  2. 50 CFR Appendix F to Part 622 - Specifications for Sea Turtle Mitigation Gear and Sea Turtle Handling and Release Requirements

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 50 Wildlife and Fisheries 12 2012-10-01 2012-10-01 false Specifications for Sea Turtle Mitigation Gear and Sea Turtle Handling and Release Requirements F Appendix F to Part 622 Wildlife and Fisheries...—Specifications for Sea Turtle Mitigation Gear and Sea Turtle Handling and Release Requirements A. Sea turtle...

  3. Earth Observatory Satellite system definition study. Report no. 5: System design and specifications. Part 1: Observatory system element specifications

    NASA Technical Reports Server (NTRS)

    1974-01-01

    The performance, design, and quality assurance requirements for the Earth Observatory Satellite (EOS) Observatory and Ground System program elements required to perform the Land Resources Management (LRM) A-type mission are presented. The requirements for the Observatory element with the exception of the instruments specifications are contained in the first part.

  4. 49 CFR 179.101 - Individual specification requirements applicable to pressure tank car tanks.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... to pressure tank car tanks. 179.101 Section 179.101 Transportation Other Regulations Relating to... (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120) § 179.101 Individual specification requirements applicable to pressure tank car...

  5. 49 CFR 179.101 - Individual specification requirements applicable to pressure tank car tanks.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... to pressure tank car tanks. 179.101 Section 179.101 Transportation Other Regulations Relating to... (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120) § 179.101 Individual specification requirements applicable to pressure tank car...

  6. 49 CFR 179.101 - Individual specification requirements applicable to pressure tank car tanks.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... to pressure tank car tanks. 179.101 Section 179.101 Transportation Other Regulations Relating to... (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120) § 179.101 Individual specification requirements applicable to pressure tank car...

  7. 49 CFR 178.346-1 - General requirements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Containers for Motor Vehicle Transportation § 178.346-1 General requirements. (a) Each Specification DOT 406 cargo tank motor vehicle must meet the general design and construction requirements in § 178.345, in addition to the specific requirements contained in this section. (b) MAWP: The MAWP of each cargo tank must...

  8. 49 CFR 178.348-1 - General requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Containers for Motor Vehicle Transportation § 178.348-1 General requirements. (a) Each specification DOT 412 cargo tank motor vehicle must conform to the general design and construction requirements in § 178.345 in addition to the specific requirements of this section. (b) The MAWP of each cargo tank must be at...

  9. 49 CFR 178.348-1 - General requirements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Containers for Motor Vehicle Transportation § 178.348-1 General requirements. (a) Each specification DOT 412 cargo tank motor vehicle must conform to the general design and construction requirements in § 178.345 in addition to the specific requirements of this section. (b) The MAWP of each cargo tank must be at...

  10. 49 CFR 178.346-1 - General requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Containers for Motor Vehicle Transportation § 178.346-1 General requirements. (a) Each Specification DOT 406 cargo tank motor vehicle must meet the general design and construction requirements in § 178.345, in addition to the specific requirements contained in this section. (b) MAWP: The MAWP of each cargo tank must...

  11. 49 CFR 178.348-1 - General requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Containers for Motor Vehicle Transportation § 178.348-1 General requirements. (a) Each specification DOT 412 cargo tank motor vehicle must conform to the general design and construction requirements in § 178.345 in addition to the specific requirements of this section. (b) The MAWP of each cargo tank must be at...

  12. 49 CFR 178.346-1 - General requirements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Containers for Motor Vehicle Transportation § 178.346-1 General requirements. (a) Each Specification DOT 406 cargo tank motor vehicle must meet the general design and construction requirements in § 178.345, in addition to the specific requirements contained in this section. (b) MAWP: The MAWP of each cargo tank must...

  13. 49 CFR 178.346-1 - General requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Containers for Motor Vehicle Transportation § 178.346-1 General requirements. (a) Each Specification DOT 406 cargo tank motor vehicle must meet the general design and construction requirements in § 178.345, in addition to the specific requirements contained in this section. (b) MAWP: The MAWP of each cargo tank must...

  14. 49 CFR 178.348-1 - General requirements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Containers for Motor Vehicle Transportation § 178.348-1 General requirements. (a) Each specification DOT 412 cargo tank motor vehicle must conform to the general design and construction requirements in § 178.345 in addition to the specific requirements of this section. (b) The MAWP of each cargo tank must be at...

  15. 40 CFR 63.775 - Reporting requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... the owner or operator is required by the Administrator to conduct a performance evaluation for a... requested by the Administrator, a site-specific test plan is not required by this subpart. If requested by the Administrator, the owner or operator must also submit the site-specific test plan required by § 63...

  16. 10 CFR 33.13 - Requirements for the issuance of a Type A specific license of broad scope.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... of broad scope. 33.13 Section 33.13 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES OF BROAD SCOPE FOR BYPRODUCT MATERIAL Specific Licenses of Broad Scope § 33.13 Requirements for the issuance of a Type A specific license of broad scope. An application for a Type A specific license of broad...

  17. 10 CFR 33.13 - Requirements for the issuance of a Type A specific license of broad scope.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... of broad scope. 33.13 Section 33.13 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES OF BROAD SCOPE FOR BYPRODUCT MATERIAL Specific Licenses of Broad Scope § 33.13 Requirements for the issuance of a Type A specific license of broad scope. An application for a Type A specific license of broad...

  18. 10 CFR 33.14 - Requirements for the issuance of a Type B specific license of broad scope.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... of broad scope. 33.14 Section 33.14 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES OF BROAD SCOPE FOR BYPRODUCT MATERIAL Specific Licenses of Broad Scope § 33.14 Requirements for the issuance of a Type B specific license of broad scope. An application for a Type B specific license of broad...

  19. 10 CFR 33.13 - Requirements for the issuance of a Type A specific license of broad scope.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... of broad scope. 33.13 Section 33.13 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES OF BROAD SCOPE FOR BYPRODUCT MATERIAL Specific Licenses of Broad Scope § 33.13 Requirements for the issuance of a Type A specific license of broad scope. An application for a Type A specific license of broad...

  20. 10 CFR 33.14 - Requirements for the issuance of a Type B specific license of broad scope.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... of broad scope. 33.14 Section 33.14 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES OF BROAD SCOPE FOR BYPRODUCT MATERIAL Specific Licenses of Broad Scope § 33.14 Requirements for the issuance of a Type B specific license of broad scope. An application for a Type B specific license of broad...

  1. 10 CFR 33.14 - Requirements for the issuance of a Type B specific license of broad scope.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... of broad scope. 33.14 Section 33.14 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES OF BROAD SCOPE FOR BYPRODUCT MATERIAL Specific Licenses of Broad Scope § 33.14 Requirements for the issuance of a Type B specific license of broad scope. An application for a Type B specific license of broad...

  2. 10 CFR 33.14 - Requirements for the issuance of a Type B specific license of broad scope.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... of broad scope. 33.14 Section 33.14 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES OF BROAD SCOPE FOR BYPRODUCT MATERIAL Specific Licenses of Broad Scope § 33.14 Requirements for the issuance of a Type B specific license of broad scope. An application for a Type B specific license of broad...

  3. 10 CFR 33.14 - Requirements for the issuance of a Type B specific license of broad scope.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... of broad scope. 33.14 Section 33.14 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES OF BROAD SCOPE FOR BYPRODUCT MATERIAL Specific Licenses of Broad Scope § 33.14 Requirements for the issuance of a Type B specific license of broad scope. An application for a Type B specific license of broad...

  4. 10 CFR 33.15 - Requirements for the issuance of a Type C specific license of broad scope.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... of broad scope. 33.15 Section 33.15 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES OF BROAD SCOPE FOR BYPRODUCT MATERIAL Specific Licenses of Broad Scope § 33.15 Requirements for the issuance of a Type C specific license of broad scope. An application for a Type C specific license of broad...

  5. 10 CFR 33.13 - Requirements for the issuance of a Type A specific license of broad scope.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... of broad scope. 33.13 Section 33.13 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES OF BROAD SCOPE FOR BYPRODUCT MATERIAL Specific Licenses of Broad Scope § 33.13 Requirements for the issuance of a Type A specific license of broad scope. An application for a Type A specific license of broad...

  6. 10 CFR 33.15 - Requirements for the issuance of a Type C specific license of broad scope.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... of broad scope. 33.15 Section 33.15 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES OF BROAD SCOPE FOR BYPRODUCT MATERIAL Specific Licenses of Broad Scope § 33.15 Requirements for the issuance of a Type C specific license of broad scope. An application for a Type C specific license of broad...

  7. 10 CFR 33.15 - Requirements for the issuance of a Type C specific license of broad scope.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... of broad scope. 33.15 Section 33.15 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES OF BROAD SCOPE FOR BYPRODUCT MATERIAL Specific Licenses of Broad Scope § 33.15 Requirements for the issuance of a Type C specific license of broad scope. An application for a Type C specific license of broad...

  8. 10 CFR 33.13 - Requirements for the issuance of a Type A specific license of broad scope.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... of broad scope. 33.13 Section 33.13 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES OF BROAD SCOPE FOR BYPRODUCT MATERIAL Specific Licenses of Broad Scope § 33.13 Requirements for the issuance of a Type A specific license of broad scope. An application for a Type A specific license of broad...

  9. Writing testable software requirements

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Knirk, D.

    1997-11-01

    This tutorial identifies common problems in analyzing requirements in the problem and constructing a written specification of what the software is to do. It deals with two main problem areas: identifying and describing problem requirements, and analyzing and describing behavior specifications.

  10. Impact of Requirements Quality on Project Success or Failure

    NASA Astrophysics Data System (ADS)

    Tamai, Tetsuo; Kamata, Mayumi Itakura

    We are interested in the relationship between the quality of the requirements specifications for software projects and the subsequent outcome of the projects. To examine this relationship, we investigated 32 projects started and completed between 2003 and 2005 by the software development division of a large company in Tokyo. The company has collected reliable data on requirements specification quality, as evaluated by software quality assurance teams, and overall project performance data relating to cost and time overruns. The data for requirements specification quality were first converted into a multiple-dimensional space, with each dimension corresponding to an item of the recommended structure for software requirements specifications (SRS) defined in IEEE Std. 830-1998. We applied various statistical analysis methods to the SRS quality data and project outcomes.

  11. 13 CFR 124.1011 - What format, degree of specificity, and basis does SBA require to consider an SDB protest?

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ..., and basis does SBA require to consider an SDB protest? 124.1011 Section 124.1011 Business Credit and... § 124.1011 What format, degree of specificity, and basis does SBA require to consider an SDB protest? (a) Format. An SDB protest need not be in any specific format in order for SBA to consider it. (b...

  12. 13 CFR 124.1011 - What format, degree of specificity, and basis does SBA require to consider an SDB protest?

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., and basis does SBA require to consider an SDB protest? 124.1011 Section 124.1011 Business Credit and... § 124.1011 What format, degree of specificity, and basis does SBA require to consider an SDB protest? (a) Format. An SDB protest need not be in any specific format in order for SBA to consider it. (b...

  13. 13 CFR 124.1011 - What format, degree of specificity, and basis does SBA require to consider an SDB protest?

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ..., and basis does SBA require to consider an SDB protest? 124.1011 Section 124.1011 Business Credit and... § 124.1011 What format, degree of specificity, and basis does SBA require to consider an SDB protest? (a) Format. An SDB protest need not be in any specific format in order for SBA to consider it. (b...

  14. 13 CFR 124.1011 - What format, degree of specificity, and basis does SBA require to consider an SDB protest?

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ..., and basis does SBA require to consider an SDB protest? 124.1011 Section 124.1011 Business Credit and... § 124.1011 What format, degree of specificity, and basis does SBA require to consider an SDB protest? (a) Format. An SDB protest need not be in any specific format in order for SBA to consider it. (b...

  15. 13 CFR 124.1011 - What format, degree of specificity, and basis does SBA require to consider an SDB protest?

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ..., and basis does SBA require to consider an SDB protest? 124.1011 Section 124.1011 Business Credit and... § 124.1011 What format, degree of specificity, and basis does SBA require to consider an SDB protest? (a) Format. An SDB protest need not be in any specific format in order for SBA to consider it. (b...

  16. Software Requirements Specification for an Ammunition Management System

    DTIC Science & Technology

    1986-09-01

    thesis takes the form of a software requirements specification. Such a specification, according to Pressman [Ref. 7], establishes a complete...defined by Pressman , is depicted in Figure 1.1. 11 Figure 1.1 Generalized Software Life Cycle The common thread which binds the various phases together...application of software engineering principles requires an established methodology. This methodology, according to Pressman [Ref. 8:p. 151 is an

  17. 16 CFR 1210.15 - Specifications.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Specifications. 1210.15 Section 1210.15 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR CIGARETTE LIGHTERS Certification Requirements § 1210.15 Specifications. (a) Requirement...

  18. Space station MSFC-DPD-235/DR no. CM-03 specification, modular space station project, Part 1 CEI

    NASA Technical Reports Server (NTRS)

    1971-01-01

    Contract engineering item specifications for the modular space station are presented. These specifications resulted from the development and allocations of requirements which are concise statements of performance or constraints on performance. Specifications contain requirements for functional performance and for the verification of design solutions.

  19. 49 CFR 179.201 - Individual specification requirements applicable to non-pressure tank car tanks.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... to non-pressure tank car tanks. 179.201 Section 179.201 Transportation Other Regulations Relating to... (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW and 115AW) § 179.201 Individual specification requirements applicable to non-pressure tank car tanks. ...

  20. 49 CFR 179.201 - Individual specification requirements applicable to non-pressure tank car tanks.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... to non-pressure tank car tanks. 179.201 Section 179.201 Transportation Other Regulations Relating to... (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW and 115AW) § 179.201 Individual specification requirements applicable to non-pressure tank car tanks. ...

  1. 49 CFR 179.301 - Individual specification requirements for multi-unit tank car tanks.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...-unit tank car tanks. 179.301 Section 179.301 Transportation Other Regulations Relating to... (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Multi-Unit Tank Car Tanks (Classes DOT-106A and 110AW) § 179.301 Individual specification requirements for multi-unit tank car tanks. (a) In addition to...

  2. 49 CFR 179.201 - Individual specification requirements applicable to non-pressure tank car tanks.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... to non-pressure tank car tanks. 179.201 Section 179.201 Transportation Other Regulations Relating to... (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW and 115AW) § 179.201 Individual specification requirements applicable to non-pressure tank car tanks. ...

  3. 49 CFR 179.301 - Individual specification requirements for multi-unit tank car tanks.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...-unit tank car tanks. 179.301 Section 179.301 Transportation Other Regulations Relating to... MATERIALS REGULATIONS SPECIFICATIONS FOR TANK CARS Specifications for Multi-Unit Tank Car Tanks (Classes DOT-106A and 110AW) § 179.301 Individual specification requirements for multi-unit tank car tanks. (a) In...

  4. 49 CFR 179.301 - Individual specification requirements for multi-unit tank car tanks.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...-unit tank car tanks. 179.301 Section 179.301 Transportation Other Regulations Relating to... (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Multi-Unit Tank Car Tanks (Classes DOT-106A and 110AW) § 179.301 Individual specification requirements for multi-unit tank car tanks. (a) In addition to...

  5. 49 CFR 179.301 - Individual specification requirements for multi-unit tank car tanks.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...-unit tank car tanks. 179.301 Section 179.301 Transportation Other Regulations Relating to... (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Multi-Unit Tank Car Tanks (Classes DOT-106A and 110AW) § 179.301 Individual specification requirements for multi-unit tank car tanks. (a) In addition to...

  6. A Methodology for Writing High Quality Requirement Specifications and for Evaluating Existing Ones

    NASA Technical Reports Server (NTRS)

    Rosenberg, Linda; Hammer, Theodore

    1999-01-01

    Requirements development and management have always been critical in the implementation of software systems-engineers are unable to build what analysts can not define. It is generally accepted that the earlier in the life cycle potential risks are identified the easier it is to eliminate or manage the conditions that introduce that risk. Problems that are not found until testing are approximately 14 times more costly to fix than if the problem was found in the requirement phase. The requirements specification, as the first tangible representation of the capability to be produced, establishes the basis for all of the project's engineering management and assurance functions. If the quality of the requirements specification is poor it can give rise to risks in all areas of the project. Recently, automated tools have become available to support requirements management. The use of these tools not only provides support in the definition and tracing of requirements, but it also opens the door to effective use of metrics in characterizing and assessing the quality of the requirement specifications.

  7. A Methodology for Writing High Quality Requirements Specification and Evaluating Existing Ones

    NASA Technical Reports Server (NTRS)

    Rosenberg, Linda; Hammer, Theodore

    1999-01-01

    Requirements development and management have always been critical in the implementation of software systems; engineers are unable to build what analysts can't define. It is generally accepted that the earlier in the life cycle potential risks are identified the easier it is to eliminate or manage the conditions that introduce that risk. Problems that are not found until testing are approximately 14 times more costly to fix than if the problem was found in the requirement phase. The requirements specification, as the first tangible representation of the capability to be produced, establishes the basis for all of the project's engineering management and assurance functions. If the quality of the requirements specification is poor it can give rise to risks in all areas of the project. Recently, automated tools have become available to support requirements management. The use of these tools not only provides support in the definition and tracing of requirements, but it also opens the door to effective use of metrics in characterizing and assessing the quality of the requirement specifications.

  8. Data Specifications for the Landsat Data Continuity Mission

    USGS Publications Warehouse

    Irons, J.R.; Speciale, N.J.; Douglas, McCuistion J.; Masek, J.G.; Markham, B.L.; Storey, James C.; Lencioni, D.E.; Ryan, R.E.

    2003-01-01

    The National Aeronautics and Space Administration (NASA) plans to procure data from a privately-owned and commercially-operated remote sensing system for the next Landsat mission, the Landsat Data Continuity Mission (LDCM). Data requirements are documented in an LDCM Data Specification. The specifications require delivery of data covering 250 Landsat scenes on a daily basis. The data are to be acquired in a manner that affords seasonal coverage of the global land mass. Data are required for the heritage reflective Thematic Mapper (TM) spectral bands plus two new bands, a blue band for coastal zone observations and a short wave infrared band for cirrus cloud detection. The specifications do not require thermal data, representing a departure from the TM heritage. The specification also requires data providing a 30 m ground sample distance for each of the spectral bands with the exception of the new cirrus cloud band at 120 m. An absolute uncertainty of 5 percent or less is required for radiometrically corrected LDCM data and the commercial operator is required to deliver data that can be registered to a cartographic projection with an uncertainty of 65 m or less. Procuring data from a commercial operator represents a new approach for the 30-year-old Landsat Program. The LDCM Data Specification will ensure that the procured data provides continuity of the Landsat data stream and advances the mission.

  9. Crew interface specifications preparation for in-flight maintenance and stowage functions

    NASA Technical Reports Server (NTRS)

    Parker, F. W.; Carlton, B. E.

    1972-01-01

    The findings and data products developed during the Phase 2 crew interface specification study are presented. Five new NASA general specifications were prepared: operations location coding system for crew interfaces; loose equipment and stowage management requirements; loose equipment and stowage data base information requirements; spacecraft loose equipment stowage drawing requirements; and inflight stowage management data requirements. Additional data was developed defining inflight maintenance processes and related data concepts for inflight troubleshooting, remove/repair/replace and scheduled maintenance activities. The process of maintenance task and equipment definition during spacecraft design and development was also defined and related data concepts were identified for futher development into formal NASA specifications during future follow-on study phases of the contract.

  10. 7 CFR 802.0 - Applicability.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... requirements set forth in this part 802 describe certain specifications, tolerances, and other technical... Standards and Technology (NIST) Handbook 44, “Specifications, Tolerances, and Other Technical Requirements...), “Specifications and Tolerances for Reference Standards and Field Standard Weights and Measures,” (Handbook 105-1...

  11. Dynamic mobility applications open source application development portal : Task 4 : system requirements specifications : final report.

    DOT National Transportation Integrated Search

    2016-10-12

    This document describes the System Requirements Specifications (SyRS) of the Dynamic Mobility Applications (DMA) Open Source Application Development Portal (OSADP) system in details according to IEEE-Std. 1233-1998. The requirement statements discuss...

  12. 47 CFR 76.75 - Specific EEO program requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Equal Employment Opportunity Requirements § 76.75 Specific EEO... necessary. Nothing in this section shall be interpreted to require a multichannel video programming...) In addition to using such recruitment sources, a multichannel video programming distributor...

  13. 47 CFR 76.75 - Specific EEO program requirements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Equal Employment Opportunity Requirements § 76.75 Specific EEO... necessary. Nothing in this section shall be interpreted to require a multichannel video programming...) In addition to using such recruitment sources, a multichannel video programming distributor...

  14. 47 CFR 76.75 - Specific EEO program requirements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Equal Employment Opportunity Requirements § 76.75 Specific EEO... necessary. Nothing in this section shall be interpreted to require a multichannel video programming...) In addition to using such recruitment sources, a multichannel video programming distributor...

  15. 47 CFR 76.75 - Specific EEO program requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Equal Employment Opportunity Requirements § 76.75 Specific EEO... necessary. Nothing in this section shall be interpreted to require a multichannel video programming...) In addition to using such recruitment sources, a multichannel video programming distributor...

  16. Target Specificity of the E3 Ligase LUBAC for Ubiquitin and NEMO Relies on Different Minimal Requirements*

    PubMed Central

    Smit, Judith J.; van Dijk, Willem J.; El Atmioui, Dris; Merkx, Remco; Ovaa, Huib; Sixma, Titia K.

    2013-01-01

    The ubiquitination of NEMO with linear ubiquitin chains by the E3-ligase LUBAC is important for the activation of the canonical NF-κB pathway. NEMO ubiquitination requires a dual target specificity of LUBAC, priming on a lysine on NEMO and chain elongation on the N terminus of the priming ubiquitin. Here we explore the minimal requirements for these specificities. Effective linear chain formation requires a precise positioning of the ubiquitin N-terminal amine in a negatively charged environment on the top of ubiquitin. Whereas the RBR-LDD region on HOIP is sufficient for targeting the ubiquitin N terminus, the priming lysine modification on NEMO requires catalysis by the RBR domain of HOIL-1L as well as the catalytic machinery of the RBR-LDD domains of HOIP. Consequently, target specificity toward NEMO is determined by multiple LUBAC components, whereas linear ubiquitin chain elongation is realized by a specific interplay between HOIP and ubiquitin. PMID:24030825

  17. Experience report: Using formal methods for requirements analysis of critical spacecraft software

    NASA Technical Reports Server (NTRS)

    Lutz, Robyn R.; Ampo, Yoko

    1994-01-01

    Formal specification and analysis of requirements continues to gain support as a method for producing more reliable software. However, the introduction of formal methods to a large software project is difficult, due in part to the unfamiliarity of the specification languages and the lack of graphics. This paper reports results of an investigation into the effectiveness of formal methods as an aid to the requirements analysis of critical, system-level fault-protection software on a spacecraft currently under development. Our experience indicates that formal specification and analysis can enhance the accuracy of the requirements and add assurance prior to design development in this domain. The work described here is part of a larger, NASA-funded research project whose purpose is to use formal-methods techniques to improve the quality of software in space applications. The demonstration project described here is part of the effort to evaluate experimentally the effectiveness of supplementing traditional engineering approaches to requirements specification with the more rigorous specification and analysis available with formal methods.

  18. Space station MSFC-DPD-235/DR no. MA-05 phase C/D program development plan. Volume 2: Phase C/D, programmatic requirements

    NASA Technical Reports Server (NTRS)

    1971-01-01

    The design plan requirements define the design implementation and control requirements for Phase C/D of the Modular Space Station Project and specifically address the Initial Space Station phase of the Space Station Program (modular). It is based primarily on the specific objective of translating the requirements of the Space Station Program, Project, Interface, and Support Requirements and preliminary contract end x item specifications into detail design of the operational systems which comprise the initial space station. This document is designed to guide aerospace contractors in the planning and bidding for Phase C/D.

  19. ESTEC wiring test programme materials related properties

    NASA Technical Reports Server (NTRS)

    Judd, M. D.

    1994-01-01

    Electrical wires are considered as EEE parts and are covered within the ESA SCC specification series (ESA SCC 3901/XXX). This specification defines the principal properties of the wires including insulation/lay-up and electrical properties. Some additional space related materials requirements are also included, requirements such as outgassing and silver plating thickness. If a project has additional materials requirements over and above those covered by the relevant SCC specification, then additional testing is required. This is especially true for crewed spacecraft. The following topics are discussed in this context: additional requirements for manned spacecraft; flammability; arc tracking; thermal decomposition; microbial surface growth; and ageing.

  20. Crewed Space Vehicle Battery Safety Requirements

    NASA Technical Reports Server (NTRS)

    Jeevarajan, Judith A.; Darcy, Eric C.

    2014-01-01

    This requirements document is applicable to all batteries on crewed spacecraft, including vehicle, payload, and crew equipment batteries. It defines the specific provisions required to design a battery that is safe for ground personnel and crew members to handle and/or operate during all applicable phases of crewed missions, safe for use in the enclosed environment of a crewed space vehicle, and safe for use in launch vehicles, as well as in unpressurized spaces adjacent to the habitable portion of a space vehicle. The required provisions encompass hazard controls, design evaluation, and verification. The extent of the hazard controls and verification required depends on the applicability and credibility of the hazard to the specific battery design and applicable missions under review. Evaluation of the design and verification program results shall be completed prior to certification for flight and ground operations. This requirements document is geared toward the designers of battery systems to be used in crewed vehicles, crew equipment, crew suits, or batteries to be used in crewed vehicle systems and payloads (or experiments). This requirements document also applies to ground handling and testing of flight batteries. Specific design and verification requirements for a battery are dependent upon the battery chemistry, capacity, complexity, charging, environment, and application. The variety of battery chemistries available, combined with the variety of battery-powered applications, results in each battery application having specific, unique requirements pertinent to the specific battery application. However, there are basic requirements for all battery designs and applications, which are listed in section 4. Section 5 includes a description of hazards and controls and also includes requirements.

  1. Investigation of specification measures for the Software Engineering Laboratory (SEL)

    NASA Technical Reports Server (NTRS)

    1984-01-01

    Requirements specification measures are investigated for potential application in the Software Engineering Laboratory. Eighty-seven candidate measures are defined; sixteen are recommended for use. Most measures are derived from a new representation, the Composite Specification Model, which is introduced. The results of extracting the specification measures from the requirements of a real system are described.

  2. 40 CFR 180.1301 - Escherichia coli O157:H7 specific bacteriophages; temporary exemption from the requirement of a...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... bacteriophages; temporary exemption from the requirement of a tolerance. 180.1301 Section 180.1301 Protection of... bacteriophages; temporary exemption from the requirement of a tolerance. A temporary exemption from the requirement of a tolerance is established for residues of lytic bacteriophages that are specific to...

  3. 40 CFR 180.1301 - Escherichia coli O157:H7 specific bacteriophages; temporary exemption from the requirement of a...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... bacteriophages; temporary exemption from the requirement of a tolerance. 180.1301 Section 180.1301 Protection of... bacteriophages; temporary exemption from the requirement of a tolerance. A temporary exemption from the requirement of a tolerance is established for residues of lytic bacteriophages that are specific to...

  4. 40 CFR 180.1301 - Escherichia coli O157:H7 specific bacteriophages; temporary exemption from the requirement of a...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... bacteriophages; temporary exemption from the requirement of a tolerance. 180.1301 Section 180.1301 Protection of... bacteriophages; temporary exemption from the requirement of a tolerance. A temporary exemption from the requirement of a tolerance is established for residues of lytic bacteriophages that are specific to...

  5. 40 CFR 180.1301 - Escherichia coli O157:H7 specific bacteriophages; temporary exemption from the requirement of a...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... bacteriophages; temporary exemption from the requirement of a tolerance. 180.1301 Section 180.1301 Protection of... bacteriophages; temporary exemption from the requirement of a tolerance. A temporary exemption from the requirement of a tolerance is established for residues of lytic bacteriophages that are specific to...

  6. Space Station Furnace Facility. Volume 2: Appendix 1: Contract End Item specification (CEI), part 1

    NASA Technical Reports Server (NTRS)

    Seabrook, Craig

    1992-01-01

    This specification establishes the performance, design, development, and verification requirements for the Space Station Furnace Facility (SSFF) Core. The definition of the SSFF Core and its interfaces, specifies requirements for the SSFF Core performance, specifies requirements for the SSFF Core design, and construction are presented, and the verification requirements are established.

  7. Connected Vehicle Pilot Deployment Program phase 1 : System Requirements Specification (SyRS) : Tampa (THEA) : final report.

    DOT National Transportation Integrated Search

    2016-08-01

    This document describes the System Requirements Specification (SyRS) for the Tampa Hillsborough Expressway Authority (THEA) Connected Vehicle (CV) Pilot Deployment. This SyRS describes the current system requirements derived from the user needs, Conc...

  8. Preliminary Analysis of Effect of Random Segment Errors on Coronagraph Performance

    NASA Technical Reports Server (NTRS)

    Stahl, Mark T.; Shaklan, Stuart B.; Stahl, H. Philip

    2015-01-01

    Are we alone in the Universe is probably the most compelling science question of our generation. To answer it requires a large aperture telescope with extreme wavefront stability. To image and characterize Earth-like planets requires the ability to block 10(exp 10) of the host stars light with a 10(exp -11) stability. For an internal coronagraph, this requires correcting wavefront errors and keeping that correction stable to a few picometers rms for the duration of the science observation. This requirement places severe specifications upon the performance of the observatory, telescope and primary mirror. A key task of the AMTD project (initiated in FY12) is to define telescope level specifications traceable to science requirements and flow those specifications to the primary mirror. From a systems perspective, probably the most important question is: What is the telescope wavefront stability specification? Previously, we suggested this specification should be 10 picometers per 10 minutes; considered issues of how this specification relates to architecture, i.e. monolithic or segmented primary mirror; and asked whether it was better to have few or many segmented. This paper reviews the 10 picometers per 10 minutes specification; provides analysis related to the application of this specification to segmented apertures; and suggests that a 3 or 4 ring segmented aperture is more sensitive to segment rigid body motion that an aperture with fewer or more segments.

  9. 7 CFR 1753.7 - Plans and specifications (P&S).

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... specifications prepared by the borrower's engineer. The specifications prepared by the borrower's engineer and... its contractor complies with the insurance and bond requirements. (4) Telecommunications software license provision. If the borrower is required to enter into a software license agreement in order to use...

  10. 7 CFR 1753.7 - Plans and specifications (P&S).

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... specifications prepared by the borrower's engineer. The specifications prepared by the borrower's engineer and... its contractor complies with the insurance and bond requirements. (4) Telecommunications software license provision. If the borrower is required to enter into a software license agreement in order to use...

  11. 7 CFR 1753.7 - Plans and specifications (P&S).

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... specifications prepared by the borrower's engineer. The specifications prepared by the borrower's engineer and... its contractor complies with the insurance and bond requirements. (4) Telecommunications software license provision. If the borrower is required to enter into a software license agreement in order to use...

  12. 7 CFR 1753.7 - Plans and specifications (P&S).

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... specifications prepared by the borrower's engineer. The specifications prepared by the borrower's engineer and... its contractor complies with the insurance and bond requirements. (4) Telecommunications software license provision. If the borrower is required to enter into a software license agreement in order to use...

  13. 48 CFR 18.107 - AbilityOne specification changes.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... changes. 18.107 Section 18.107 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION... AbilityOne specification changes. Contracting officers are not held to the notification required when changes in AbilityOne specifications or descriptions are required to meet emergency needs. (See 8.712(d...

  14. 27 CFR 30.21 - Requirements.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... thermometers furnished by the Government. However, where this part requires the use of a specific gravity hydrometer, TTB officers shall use precision grade specific gravity hydrometers conforming to the provisions... determination of specific gravity and for gauging. From time to time appropriate TTB officers shall verify the...

  15. 27 CFR 30.21 - Requirements.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... thermometers furnished by the Government. However, where this part requires the use of a specific gravity hydrometer, TTB officers shall use precision grade specific gravity hydrometers conforming to the provisions... determination of specific gravity and for gauging. From time to time appropriate TTB officers shall verify the...

  16. 27 CFR 30.21 - Requirements.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... thermometers furnished by the Government. However, where this part requires the use of a specific gravity hydrometer, TTB officers shall use precision grade specific gravity hydrometers conforming to the provisions... determination of specific gravity and for gauging. From time to time appropriate TTB officers shall verify the...

  17. 27 CFR 30.21 - Requirements.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... thermometers furnished by the Government. However, where this part requires the use of a specific gravity hydrometer, TTB officers shall use precision grade specific gravity hydrometers conforming to the provisions... determination of specific gravity and for gauging. From time to time appropriate TTB officers shall verify the...

  18. 22 CFR 226.49 - USAID-Specific procurement requirements

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false USAID-Specific procurement requirements 226.49 Section 226.49 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ADMINISTRATION OF ASSISTANCE AWARDS TO U.S. NON-GOVERNMENTAL ORGANIZATIONS Post-award Requirements Procurement Standards § 226.49 USAID...

  19. 47 CFR 76.75 - Specific EEO program requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Equal Employment Opportunity Requirements § 76.75 Specific EEO... or sex is prohibited and that they may notify the Equal Employment Opportunity Commission, the... necessary. Nothing in this section shall be interpreted to require a multichannel video programming...

  20. The method to divide a sentence of requirement into individual requirements and the development of requirement specification editor which can describe individual requirements.

    PubMed

    Sato, Kuniya; Ooba, Masahiro; Takagi, Tomohiko; Furukawa, Zengo; Komiya, Seiichi; Yaegashi, Rihito

    2013-12-01

    Agile software development gains requirements from the direct discussion with customers and the development staff each time, and the customers evaluate the appropriateness of the requirement. If the customers divide the complicated requirement into individual requirements, the engineer who is in charge of software development can understand it easily. This is called division of requirement. However, the customers do not understand how much and how to divide the requirements. This paper proposes the method to divide a complicated requirement into individual requirements. Also, it shows the development of requirement specification editor which can describe individual requirements. The engineer who is in charge of software development can understand requirements easily.

  1. Towards the formal specification of the requirements and design of a processor interface unit: HOL listings

    NASA Technical Reports Server (NTRS)

    Fura, David A.; Windley, Phillip J.; Cohen, Gerald C.

    1993-01-01

    This technical report contains the HOL listings of the specification of the design and major portions of the requirements for a commercially developed processor interface unit (or PIU). The PIU is an interface chip performing memory interface, bus interface, and additional support services for a commercial microprocessor within a fault-tolerant computer system. This system, the Fault-Tolerant Embedded Processor (FTEP), is targeted towards applications in avionics and space requiring extremely high levels of mission reliability, extended maintenance-free operation, or both. This report contains the actual HOL listings of the PIU specification as it currently exists. Section two of this report contains general-purpose HOL theories that support the PIU specification. These theories include definitions for the hardware components used in the PIU, our implementation of bit words, and our implementation of temporal logic. Section three contains the HOL listings for the PIU design specification. Aside from the PIU internal bus (I-Bus), this specification is complete. Section four contains the HOL listings for a major portion of the PIU requirements specification. Specifically, it contains most of the definition for the PIU behavior associated with memory accesses initiated by the local processor.

  2. 40 CFR 63.1095 - What specific requirements must I comply with?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... according to any of the options in 40 CFR 61.342(c)(1) through (e) or transfer waste off-site. If you elect... Systems and Waste Operations Waste Requirements § 63.1095 What specific requirements must I comply with? For waste that is not transferred off-site, you must comply with the requirements in paragraph (a) of...

  3. 40 CFR 63.1095 - What specific requirements must I comply with?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... according to any of the options in 40 CFR 61.342(c)(1) through (e) or transfer waste off-site. If you elect... Systems and Waste Operations Waste Requirements § 63.1095 What specific requirements must I comply with? For waste that is not transferred off-site, you must comply with the requirements in paragraph (a) of...

  4. Discrete Notch signaling requirements in the specification of hematopoietic stem cells

    PubMed Central

    Kim, Albert D; Melick, Chase H; Clements, Wilson K; Stachura, David L; Distel, Martin; Panáková, Daniela; MacRae, Calum; Mork, Lindsey A; Crump, J Gage; Traver, David

    2014-01-01

    Hematopoietic stem cells (HSCs) require multiple molecular inputs for proper specification, including activity of the Notch signaling pathway. A requirement for the Notch1 and dispensability of the Notch2 receptor has been demonstrated in mice, but the role of the remaining Notch receptors has not been investigated. Here, we demonstrate that three of the four Notch receptors are independently required for the specification of HSCs in the zebrafish. The orthologues of the murine Notch1 receptor, Notch1a and Notch1b, are each required intrinsically to fate HSCs, just prior to their emergence from aortic hemogenic endothelium. By contrast, the Notch3 receptor is required earlier within the developing somite to regulate HSC emergence in a non-cell-autonomous manner. Epistatic analyses demonstrate that Notch3 function lies downstream of Wnt16, which is required for HSC specification through its regulation of two Notch ligands, dlc and dld. Collectively, these findings demonstrate for the first time that multiple Notch signaling inputs are required to specify HSCs and that Notch3 performs a novel role within the somite to regulate the neighboring precursors of hemogenic endothelium. PMID:25230933

  5. IDC Re-Engineering Phase 2 System Specification Document Version 1.5

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Satpathi, Meara Allena; Burns, John F.; Harris, James M.

    This document contains the system specifications derived to satisfy the system requirements found in the IDC System Requirements Document for the IDC Re-Engineering Phase 2 project. This System Specification Document (SSD) defines waveform data processing requirements for the International Data Centre (IDC) of the Comprehensive Nuclear Test Ban Treaty Organization (CTBTO). The routine processing includes characterization of events with the objective of screening out events considered to be consistent with natural phenomena or non-nuclear, man-made phenomena. This document does not address requirements concerning acquisition, processing and analysis of radionuclide data but does include requirements for the dissemination of radionuclide datamore » and products.« less

  6. NOSS altimeter algorithm specifications

    NASA Technical Reports Server (NTRS)

    Hancock, D. W.; Forsythe, R. G.; Mcmillan, J. D.

    1982-01-01

    A description of all algorithms required for altimeter processing is given. Each description includes title, description, inputs/outputs, general algebraic sequences and data volume. All required input/output data files are described and the computer resources required for the entire altimeter processing system were estimated. The majority of the data processing requirements for any radar altimeter of the Seasat-1 type are scoped. Additions and deletions could be made for the specific altimeter products required by other projects.

  7. 46 CFR 164.009-3 - Noncombustible materials not requiring specific approval.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Merchant Vessels § 164.009-3 Noncombustible materials not requiring specific approval. The following noncombustible materials may be used in merchant vessel construction though not specifically approved under this subpart: (a) Sheet glass, block glass, clay, ceramics, and uncoated fibers. (b) All metals, except...

  8. 10 CFR 54.15 - Specific exemptions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Specific exemptions. 54.15 Section 54.15 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) REQUIREMENTS FOR RENEWAL OF OPERATING LICENSES FOR NUCLEAR POWER PLANTS General Provisions § 54.15 Specific exemptions. Exemptions from the requirements of this part may be...

  9. 77 FR 50726 - Software Requirement Specifications for Digital Computer Software and Complex Electronics Used in...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-22

    ... Computer Software and Complex Electronics Used in Safety Systems of Nuclear Power Plants AGENCY: Nuclear...-1209, ``Software Requirement Specifications for Digital Computer Software and Complex Electronics used... Electronics Engineers (ANSI/IEEE) Standard 830-1998, ``IEEE Recommended Practice for Software Requirements...

  10. 49 CFR 238.601 - Scope.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... TRANSPORTATION PASSENGER EQUIPMENT SAFETY STANDARDS Specific Safety Planning Requirements for Tier II Passenger Equipment § 238.601 Scope. This subpart contains specific safety planning requirements for the operation of...

  11. An extensive requirement for transcription factor IID-specific TAF-1 in Caenorhabditis elegans embryonic transcription.

    PubMed

    Walker, Amy K; Shi, Yang; Blackwell, T Keith

    2004-04-09

    The general transcription factor TFIID sets the mRNA start site and consists of TATA-binding protein and associated factors (TAF(II)s), some of which are also present in SPT-ADA-GCN5 (SAGA)-related complexes. In yeast, results of multiple studies indicate that TFIID-specific TAF(II)s are not required for the transcription of most genes, implying that intact TFIID may have a surprisingly specialized role in transcription. Relatively little is known about how TAF(II)s contribute to metazoan transcription in vivo, especially at developmental and tissue-specific genes. Previously, we investigated functions of four shared TFIID/SAGA TAF(II)s in Caenorhabditis elegans. Whereas TAF-4 was required for essentially all embryonic transcription, TAF-5, TAF-9, and TAF-10 were dispensable at multiple developmental and other metazoan-specific promoters. Here we show evidence that in C. elegans embryos transcription of most genes requires TFIID-specific TAF-1. TAF-1 is not as universally required as TAF-4, but it is essential for a greater proportion of transcription than TAF-5, -9, or -10 and is important for transcription of many developmental and other metazoan-specific genes. TAF-2, which binds core promoters with TAF-1, appears to be required for a similarly substantial proportion of transcription. C. elegans TAF-1 overlaps functionally with the coactivator p300/CBP (CBP-1), and at some genes it is required along with the TBP-like protein TLF(TRF2). We conclude that during C. elegans embryogenesis TAF-1 and TFIID have broad roles in transcription and development and that TFIID and TLF may act together at certain promoters. Our findings imply that in metazoans TFIID may be of widespread importance for transcription and for expression of tissue-specific genes.

  12. AMTD: Update of Engineering Specifications Derived from Science Requirements for Future UVOIR Space Telescopes

    NASA Technical Reports Server (NTRS)

    Stahl, H. Philip

    2014-01-01

    AMTD is using a Science Driven Systems Engineering approach to develop Engineering Specifications based on Science Measurement Requirements and Implementation Constraints. Science requirements meet the needs of both Exoplanet and General Astrophysics science. Engineering Specifications are guiding our effort to mature to TRL-6 the critical technologies needed to produce 4-m or larger flight-qualified UVOIR mirrors by 2018 so that a viable mission can be considered by the 2020 Decadal Review.

  13. Job-specific mandatory medical examinations for the police force.

    PubMed

    Boschman, J S; Hulshof, C T J; Frings-Dresen, M H W; Sluiter, J K

    2017-08-01

    Mandatory medical examinations (MMEs) of workers should be based on the health and safety requirements that are needed for effectively performing the relevant work. For police personnel in the Netherlands, no job-specific MME exists that takes the specific tasks and duties into account. To provide the Dutch National Police with a knowledge base for job-specific MMEs for police personnel that will lead to equitable decisions from an occupational health perspective about who can perform police duties. We used a stepwise mixed-methods approach in which we included interviews with employees and experts and a review of the national and international literature. We determined the job demands for the various police jobs, determined which were regarded as specific job demands and formulated the matching health requirements as specific as possible for each occupation. A total of 21 specific job demands were considered relevant in different police jobs. These included biomechanical, physiological, physical, emotional, psychological/cognitive and sensory job demands. We formulated both police-generic and job-specific health requirements based on the specific job demands. Two examples are presented: bike patrol and criminal investigation. Our study substantiated the need for job-specific MMEs for police personnel. We found specific job demands that differed substantially for various police jobs. The corresponding health requirements were partly police-generic, and partly job-specific. © The Author 2017. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com

  14. How Well Can Existing Software Support Processes Accomplish Sustainment of a Non-Developmental Item-Based Acquisition Strategy

    DTIC Science & Technology

    2017-04-06

    Research Hypothesis ........................................................................................................... 15 Research Design ...user community and of accommodating advancing software applications by the vendors. Research Design My approach to this project was to conduct... design descriptions , requirements specifications, test documentation, interface requirement specifications, product specifications, and software

  15. 46 CFR 160.049-3 - Materials.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Specification for a Buoyant Cushion Plastic Foam § 160.049-3... requirements of subpart 164.019. (b) Unicellular plastic foam. The unicellular plastic foam shall be all new material complying with the requirements of Specification subpart 164.015 for Type A or B foam. (c) Cover...

  16. 46 CFR 160.049-3 - Materials.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Specification for a Buoyant Cushion Plastic Foam § 160.049-3... requirements of subpart 164.019. (b) Unicellular plastic foam. The unicellular plastic foam shall be all new material complying with the requirements of Specification subpart 164.015 for Type A or B foam. (c) Cover...

  17. 49 CFR 180.509 - Requirements for inspection and test of specification tank cars.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... specification tank cars. 180.509 Section 180.509 Transportation Other Regulations Relating to Transportation... REGULATIONS CONTINUING QUALIFICATION AND MAINTENANCE OF PACKAGINGS Qualification and Maintenance of Tank Cars § 180.509 Requirements for inspection and test of specification tank cars. (a) General. (1) Each tank...

  18. 49 CFR 180.509 - Requirements for inspection and test of specification tank cars.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... specification tank cars. 180.509 Section 180.509 Transportation Other Regulations Relating to Transportation...) CONTINUING QUALIFICATION AND MAINTENANCE OF PACKAGINGS Qualification and Maintenance of Tank Cars § 180.509 Requirements for inspection and test of specification tank cars. (a) General. (1) Each tank car facility shall...

  19. 33 CFR 149.615 - What construction drawings and specifications are required?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false What construction drawings and... and Equipment General § 149.615 What construction drawings and specifications are required? (a) To... accepted Certifying Entity (CE) at least three copies of: (1) Each construction drawing and specification...

  20. 77 FR 58421 - Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications Task Force...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-20

    ... Ventilation System Surveillance Requirements To Operate for 10 Hours per Month,'' Using the Consolidated Line... currently require operating the ventilation system for at least 10 continuous hours with the heaters... Technical Specifications (TSs) Task Force (TSTF) Traveler TSTF-522, Revision 0, ``Revise Ventilation System...

  1. 77 FR 16869 - Proposed Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-22

    ... Ventilation System Surveillance Requirements to Operate for 10 hours per Month.'' DATES: Comment period....1, which currently require operating the heaters in the respective systems for at least 10... Adoption of Technical Specifications Task Force Traveler TSTF-522, Revision 0, ``Revise Ventilation System...

  2. 40 CFR 86.1406 - Equipment required and specifications; overview.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... minimize condensation. (b) Fuel and analytical tests. Fuel requirements for the CST are specified in §§ 86...-Cycle Light-Duty Trucks; Certification Short Test Procedures § 86.1406 Equipment required and specifications; overview. (a) Exhaust emission tests. All vehicles subject to this subpart are tested for exhaust...

  3. 40 CFR 86.1406 - Equipment required and specifications; overview.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... minimize condensation. (b) Fuel and analytical tests. Fuel requirements for the CST are specified in §§ 86...-Cycle Light-Duty Trucks; Certification Short Test Procedures § 86.1406 Equipment required and specifications; overview. (a) Exhaust emission tests. All vehicles subject to this subpart are tested for exhaust...

  4. 40 CFR 86.1406 - Equipment required and specifications; overview.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... minimize condensation. (b) Fuel and analytical tests. Fuel requirements for the CST are specified in §§ 86...-Cycle Light-Duty Trucks; Certification Short Test Procedures § 86.1406 Equipment required and specifications; overview. (a) Exhaust emission tests. All vehicles subject to this subpart are tested for exhaust...

  5. 40 CFR 86.1406 - Equipment required and specifications; overview.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... minimize condensation. (b) Fuel and analytical tests. Fuel requirements for the CST are specified in §§ 86...-Cycle Light-Duty Trucks; Certification Short Test Procedures § 86.1406 Equipment required and specifications; overview. (a) Exhaust emission tests. All vehicles subject to this subpart are tested for exhaust...

  6. 49 CFR 178.346-1 - General requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Specifications for Containers for Motor Vehicle Transportation § 178.346-1 General requirements. (a) Each Specification DOT 406 cargo tank motor vehicle must meet the general design and construction requirements in... each cargo tank must be no lower than 2.65 psig and no higher than 4 psig. (c) Vacuum loaded cargo...

  7. 76 FR 19333 - Commission Information Collection Activities (FERC-725B); Comment Request; Submitted for OMB Review

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-07

    ... the Bulk-Power System to comply with specific requirements to safeguard critical cyber assets.\\2\\ These standards help protect the nation's Bulk-Power System against potential disruptions from cyber... recordkeeping requirements. Specifically, CIP- 008-1 requires responsible entities to report cyber security...

  8. 40 CFR 63.1285 - Reporting requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... the owner or operator is requested by the Administrator to conduct a performance evaluation for a... requested by the Administrator, a site-specific test plan is not required by this subpart. If requested by the Administrator, the owner or operator must also submit the site-specific test plan required by § 63...

  9. 40 CFR 152.95 - Citation of all studies in the Agency's files pertinent to a specific data requirement.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... PROCEDURES Procedures To Ensure Protection of Data Submitters' Rights § 152.95 Citation of all studies in the... requirement. The applicant who selects this cite-all option must submit to the Agency: (a) A general offer to... may be limited to apply only to data pertinent to the specific data requirement(s) for which the cite...

  10. Attitudes of Danish pig farmers towards requirements for hospital pens.

    PubMed

    Thomsen, Peter T; Klottrup, Anne; Steinmetz, Henriette; Herskin, Mette S

    2016-06-01

    According to Danish legislation, sick or injured pigs must be housed in hospital pens with specific requirements. During recent years the majority of cases of non-compliance with legislation have been related to management of these animals. Hence, we hypothesized that 1) pig farmers generally find a requirement for hospital pens reasonable, but do not know the specific requirements; 2) pig farmers do not find the specific requirements for hospital pens meaningful compared with their perception of what sick pigs need; and 3) pig farmers often omit to move sick pigs to hospital pens due to lack of time or labour. An on-line questionnaire regarding farmers' attitudes towards and knowledge about legal requirements for hospital pens was constructed and e-mailed to 2348 pig farmers. In total, 508 farmers answered the questionnaire. Overall, 66% of the respondents found that the requirements for hospital pens made good sense, and more than 90% found that it made at least partial sense. Even though almost all respondents thought they knew the legal requirements for specific facilities in hospital pens, in fact 20% of them did not. The majority of respondents found all specific requirements in accordance with the needs of sick pigs, with the exception of cooling (only 17% agreed that cooling was needed). Unexpectedly, lack of time or labour wasn't reported to be a major obstacle to the use of hospital pens. Possibly, different thresholds for defining a pig as 'sick enough' to need housing in a hospital pen may exist between farmers and authorities. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. Lesson 7: From Requirements to Specific Solutions

    EPA Pesticide Factsheets

    CROMERR requirements set performance goals, they do not dictate specific system functions, operating procedures,system architecture, or technology. The task is to decide on a solution to meet the goals.

  12. Interface Control Specification

    DOT National Transportation Integrated Search

    1996-06-12

    The Requirements Specification Document (#9933.04) identifies the overall system level requirements of the Gary-Chicago-Milwaukee (GCM) Corridor Transportation Information Center (C-TIC). This document provides details about the data and control flow...

  13. A cohort study on elderly individuals newly certified as requiring long-term care: comparison of rates of care-needs certifications between basic checklist respondents/specific health examinees and non-respondents/non-examinees of 37,000 elderlies in a city.

    PubMed

    Fujimoto, Megumi; Katsura, Toshiki; Hoshino, Akiko; Shizawa, Miho; Usui, Kanae; Yokoyama, Eri; Hara, Mayumi

    2018-05-01

    Objective: The rates of care-needs certification were mainly compared between two cohorts: 7,820 specific health checkup examinees/basic checklist respondents and 29,234 non-examinees/non-respondents. Subjects and Methods: Among approximately 37,000 elderly citizens of X City, the number of individuals newly certified as requiring long-term care were observed from the date of the first specific health checkup in 2008 to March 31, 2013. The aggregated totals of these individuals and associated factors were evaluated. Results: 1. Support Required 1, Support Required 2, and Long-term Care Required (level 1) certified individuals accounted for approximately 80% of newly certified individuals aged 65-74 years. Newly certified individuals aged 75 years and over had similar results with 37.2% of them being certified Support Required 1, 19.4% certified Support Required 2, and 22.9% certified Long-term Care Required (level 1). 2. The primary factors for care-needs certification in individuals aged 65-74 years were arthritic disorder in 27.6%, falls and bone fractures in 11.3%, and malignant neoplasm and cerebrovascular disease, among others. This was similar for individuals aged 75 years or over. 3. Of the 7,820 specific health checkup examinees/basic checklist respondents, 1,280 were newly certified as requiring long-term care (16.4%) compared to 7,878 (26.9%) of the 29,234 non-examinees/non-respondents. Therefore, the latter cohort had a significantly higher rate of individuals who were newly certified as requiring long-term care. Conclusion: Both specific health checkups and basic checklists are effective health policies to protect frailty in community elderlies.

  14. Earth Observatory Satellite system definition study. Report no. 3: Design/cost tradeoff studies. Appendix C: EOS program requirements document

    NASA Technical Reports Server (NTRS)

    1974-01-01

    An analysis of the requirements for the Earth Observatory Satellite (EOS) system specifications is presented. The analysis consists of requirements obtained from existing documentation and those derived from functional analysis. The requirements follow the hierarchy of program, mission, system, and subsystem. The code for designating specific requirements is explained. Among the subjects considered are the following: (1) the traffic model, (2) space shuttle related performance, (3) booster related performance, (4) the data collection system, (5) spacecraft structural tests, and (6) the ground support requirements.

  15. Smart roadside initiative : system requirements specifications.

    DOT National Transportation Integrated Search

    2015-09-01

    This document describes the system requirements specifications (SyRS) for the Smart Roadside Initiative (SRI) Prototype for the delivery of capabilities related to wireless roadside inspections, electronic screening/virtual weigh stations, universal ...

  16. 49 CFR 178.345-1 - General requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... a fillet weld joining the tank shell to a flange shaped to fit the shell contour. (d) A manufacturer... be constructed with the cargo tanks made to the same specification or to different specifications...) Specification DOT 406, DOT 407 and DOT 412 cargo tank motor vehicles must conform to the requirements of this...

  17. 49 CFR 178.347-1 - General requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Specifications for Containers for Motor Vehicle Transportation § 178.347-1 General requirements. (a) Each specification DOT 407 cargo tank motor vehicle must conform to the general design and construction requirements... be of a circular cross-section and have an MAWP of at least 25 psig. (c) Any cargo tank built to this...

  18. 76 FR 329 - Proposed Information Collection; Comment Request; Reporting Requirements for the Ocean Salmon...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-04

    ... Collection; Comment Request; Reporting Requirements for the Ocean Salmon Fishery Off the Coasts of Washington..., designated regulatory areas in the commercial ocean salmon fishery off the coasts of Washington, Oregon, and... requirements to land salmon within specific time frames and in specific areas may be implemented in the...

  19. 49 CFR 172.704 - Training requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... PROVISIONS, HAZARDOUS MATERIALS COMMUNICATIONS, EMERGENCY RESPONSE INFORMATION, TRAINING REQUIREMENTS, AND... communication standards of this subchapter. (2) Function-specific training. (i) Each hazmat employee must be... must include company security objectives, organizational security structure, specific security...

  20. Deaf mobile application accessibility requirements

    NASA Astrophysics Data System (ADS)

    Nathan, Shelena Soosay; Hussain, Azham; Hashim, Nor Laily

    2016-08-01

    Requirement for deaf mobile applications need to be analysed to ensure the disabilities need are instilled into the mobile applications developed for them. Universal design is understandable to comply every user needs, however specific disability is argued by the authors to have different need and requirements. These differences are among the reasons for these applications being developed to target for a specific group of people, however they are less usable and later abandoned. This study focuses on deriving requirements that are needed by the deaf in their mobile applications that are meant specifically for them. Studies on previous literature was conducted it can be concluded that graphic, text, multimedia and sign language interpreter are among mostly required features to be included in their mobile application to ensure the applications are usable for this community.

  1. Instrument constraints and interface specifications. Earth Observatory Satellite system definition study (EOS)

    NASA Technical Reports Server (NTRS)

    1974-01-01

    The equipment specifications for the thematic mapper and high resolution pointable imager for use on the Earth Observatory Satellite (EOS) are presented. The interface requirements of the systems are defined. The interface requirements are extracted from the equipment specifications and are intended as a summary to be used by the system and spacecraft designer. The appropriate documentation from which the specifications of the equipment are established are identified.

  2. Systems Maintenance Automated Repair Tasks (SMART)

    NASA Technical Reports Server (NTRS)

    Schuh, Joseph; Mitchell, Brent; Locklear, Louis; Belson, Martin A.; Al-Shihabi, Mary Jo Y.; King, Nadean; Norena, Elkin; Hardin, Derek

    2010-01-01

    SMART is a uniform automated discrepancy analysis and repair-authoring platform that improves technical accuracy and timely delivery of repair procedures for a given discrepancy (see figure a). SMART will minimize data errors, create uniform repair processes, and enhance the existing knowledge base of engineering repair processes. This innovation is the first tool developed that links the hardware specification requirements with the actual repair methods, sequences, and required equipment. SMART is flexibly designed to be useable by multiple engineering groups requiring decision analysis, and by any work authorization and disposition platform (see figure b). The organizational logic creates the link between specification requirements of the hardware, and specific procedures required to repair discrepancies. The first segment in the SMART process uses a decision analysis tree to define all the permutations between component/ subcomponent/discrepancy/repair on the hardware. The second segment uses a repair matrix to define what the steps and sequences are for any repair defined in the decision tree. This segment also allows for the selection of specific steps from multivariable steps. SMART will also be able to interface with outside databases and to store information from them to be inserted into the repair-procedure document. Some of the steps will be identified as optional, and would only be used based on the location and the current configuration of the hardware. The output from this analysis would be sent to a work authoring system in the form of a predefined sequence of steps containing required actions, tools, parts, materials, certifications, and specific requirements controlling quality, functional requirements, and limitations.

  3. HMPT: Basic Radioactive Material Transportation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hypes, Philip A.

    2016-02-29

    Hazardous Materials and Packaging and Transportation (HMPT): Basic Radioactive Material Transportation Live (#30462, suggested one time) and Test (#30463, required initially and every 36 months) address the Department of Transportation’s (DOT’s) function-specific [required for hazardous material (HAZMAT) handlers, packagers, and shippers] training requirements of the HMPT Los Alamos National Laboratory (LANL) Labwide training. This course meets the requirements of 49 CFR 172, Subpart H, Section 172.704(a)(ii), Function-Specific Training.

  4. A Framework for RFID Survivability Requirement Analysis and Specification

    NASA Astrophysics Data System (ADS)

    Zuo, Yanjun; Pimple, Malvika; Lande, Suhas

    Many industries are becoming dependent on Radio Frequency Identification (RFID) technology for inventory management and asset tracking. The data collected about tagged objects though RFID is used in various high level business operations. The RFID system should hence be highly available, reliable, and dependable and secure. In addition, this system should be able to resist attacks and perform recovery in case of security incidents. Together these requirements give rise to the notion of a survivable RFID system. The main goal of this paper is to analyze and specify the requirements for an RFID system to become survivable. These requirements, if utilized, can assist the system in resisting against devastating attacks and recovering quickly from damages. This paper proposes the techniques and approaches for RFID survivability requirements analysis and specification. From the perspective of system acquisition and engineering, survivability requirement is the important first step in survivability specification, compliance formulation, and proof verification.

  5. 29 CFR 4.117 - Work subject to requirements of Walsh-Healey Act.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Application of the McNamara-O'Hara Service Contract Act Specific Exclusions § 4.117 Work subject to... work required to be done in accordance with the provision of the Walsh-Healey Public Contracts Act” (49...., specifications or requirements, rather than for “contracts” subject to the Walsh-Healey Act. The purpose of the...

  6. 49 CFR 179.103 - Special requirements for class 114A * * * tank car tanks.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Special requirements for class 114A * * * tank car...) SPECIFICATIONS FOR TANK CARS Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120) § 179.103 Special requirements for class 114A * * * tank car tanks. (a) In addition to the applicable...

  7. 49 CFR 179.103 - Special requirements for class 114A * * * tank car tanks.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Special requirements for class 114A * * * tank car...) SPECIFICATIONS FOR TANK CARS Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120) § 179.103 Special requirements for class 114A * * * tank car tanks. (a) In addition to the applicable...

  8. 49 CFR 179.103 - Special requirements for class 114A * * * tank car tanks.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Special requirements for class 114A * * * tank car...) SPECIFICATIONS FOR TANK CARS Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120) § 179.103 Special requirements for class 114A * * * tank car tanks. (a) In addition to the applicable...

  9. 49 CFR 179.103 - Special requirements for class 114A * * * tank car tanks.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Special requirements for class 114A * * * tank car... SPECIFICATIONS FOR TANK CARS Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120) § 179.103 Special requirements for class 114A * * * tank car tanks. (a) In addition to the applicable...

  10. 76 FR 2924 - Proposed Generic Communications; Draft NRC Regulatory Issue Summary 2011-XX; Adequacy of Station...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-18

    ... positions. No specific action or written response is required. DATES: Comment period expires 30 days after... new requirements or staff positions. No specific action or written response is required. Background... on the operation of Class 1E loads. These degraded voltage conditions will not be detected by the...

  11. Effects of Using Requirements Catalogs on Effectiveness and Productivity of Requirements Specification in a Software Project Management Course

    ERIC Educational Resources Information Center

    Fernández-Alemán, José Luis; Carrillo-de-Gea, Juan Manuel; Meca, Joaquín Vidal; Ros, Joaquín Nicolás; Toval, Ambrosio; Idri, Ali

    2016-01-01

    This paper presents the results of two educational experiments carried out to determine whether the process of specifying requirements (catalog-based reuse as opposed to conventional specification) has an impact on effectiveness and productivity in co-located and distributed software development environments. The participants in the experiments…

  12. 34 CFR 222.171 - What LEAs may be eligible for Discretionary Construction grants?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) Meet the specific numeric requirements regarding bonding capacity. (2) The Secretary must also consider... students; or (v) Meet the specific numeric requirements regarding bonding capacity. (2) The Secretary must...

  13. Swa2, the yeast homolog of mammalian auxilin, is specifically required for the propagation of the prion variant [URE 3‐1

    PubMed Central

    Troisi, Elizabeth M.; Rockman, Michael E.; Nguyen, Phil P.; Oliver, Emily E.

    2015-01-01

    Summary Yeast prions require a core set of chaperone proteins including Sis1, Hsp70 and Hsp104 to generate new amyloid templates for stable propagation, yet emerging studies indicate that propagation of some prions requires additional chaperone activities, demonstrating chaperone specificity beyond the common amyloid requirements. To comprehensively assess such prion‐specific requirements for the propagation of the [URE 3] prion variant [URE 3‐1], we screened 12 yeast cytosolic J‐proteins, and here we report a novel role for the J‐protein Swa2/Aux1. Swa2 is the sole yeast homolog of the mammalian protein auxilin, which, like Swa2, functions in vesicle‐mediated endocytosis by disassembling the structural lattice formed by the protein clathrin. We found that, in addition to Sis1, [URE 3‐1] is specifically dependent upon Swa2, but not on any of the 11 other J‐proteins. Further, we show that [URE 3‐1] propagation requires both a functional J‐domain and the tetratricopeptide repeat (TPR) domain, but surprisingly does not require Swa2‐clathrin binding. Because the J‐domain of Swa2 can be replaced with the J‐domains of other proteins, our data strongly suggest that prion‐chaperone specificity arises from the Swa2 TPR domain and supports a model where Swa2 acts through Hsp70, most likely to provide additional access points for Hsp104 to promote prion template generation. PMID:26031938

  14. Feasibility study for the Swaziland/Mozambique interconnector. EPC specifications. Export trade information

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1997-11-01

    This study, conducted by Black & Veatch, was funded by the U.S. Trade and Development Agency. The report, produced for the Ministry of National Resources, Energy and Environment (MNRE) of Swaziland, determines the least cost capacity expansion option to meet the future power demand and system reliability criteria of Swaziland, with particular emphasis on the proposed Interconnector between Swaziland and Mozambique. Volume 3 contains EPC Specifications and is divided into the following divisions: (1) Commercial; (2) General Technical Requirements; (3) Transmission Line Technical Requirements; (4) Substation Technical Requirements; (5) Specifications.

  15. Integrated flight/propulsion control - Subsystem specifications for performance

    NASA Technical Reports Server (NTRS)

    Neighbors, W. K.; Rock, Stephen M.

    1993-01-01

    A procedure is presented for calculating multiple subsystem specifications given a number of performance requirements on the integrated system. This procedure applies to problems where the control design must be performed in a partitioned manner. It is based on a structured singular value analysis, and generates specifications as magnitude bounds on subsystem uncertainties. The performance requirements should be provided in the form of bounds on transfer functions of the integrated system. This form allows the expression of model following, command tracking, and disturbance rejection requirements. The procedure is demonstrated on a STOVL aircraft design.

  16. Capturing Requirements for Autonomous Spacecraft with Autonomy Requirements Engineering

    NASA Astrophysics Data System (ADS)

    Vassev, Emil; Hinchey, Mike

    2014-08-01

    The Autonomy Requirements Engineering (ARE) approach has been developed by Lero - the Irish Software Engineering Research Center within the mandate of a joint project with ESA, the European Space Agency. The approach is intended to help engineers develop missions for unmanned exploration, often with limited or no human control. Such robotics space missions rely on the most recent advances in automation and robotic technologies where autonomy and autonomic computing principles drive the design and implementation of unmanned spacecraft [1]. To tackle the integration and promotion of autonomy in software-intensive systems, ARE combines generic autonomy requirements (GAR) with goal-oriented requirements engineering (GORE). Using this approach, software engineers can determine what autonomic features to develop for a particular system (e.g., a space mission) as well as what artifacts that process might generate (e.g., goals models, requirements specification, etc.). The inputs required by this approach are the mission goals and the domain-specific GAR reflecting specifics of the mission class (e.g., interplanetary missions).

  17. Draft Geologic Disposal Requirements Basis for STAD Specification

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ilgen, Anastasia G.; Bryan, Charles R.; Hardin, Ernest

    2015-03-25

    This document provides the basis for requirements in the current version of Performance Specification for Standardized Transportation, Aging, and Disposal Canister Systems, (FCRD-NFST-2014-0000579) that are driven by storage and geologic disposal considerations. Performance requirements for the Standardized Transportation, Aging, and Disposal (STAD) canister are given in Section 3.1 of that report. Here, the requirements are reviewed and the rationale for each provided. Note that, while FCRD-NFST-2014-0000579 provides performance specifications for other components of the STAD storage system (e.g. storage overpack, transfer and transportation casks, and others), these have no impact on the canister performance during disposal, and are not discussedmore » here.« less

  18. Preliminary Specifications for Standard Concrete Ties and Fastenings for Transit Track

    DOT National Transportation Integrated Search

    1979-01-01

    These revised specifications cover requirements for component materials, manufacturing procedures, and handling of mono-block and two-block concrete (prestressed) cross ties, pads, and insulators for rapid transit use. It also includes requirements f...

  19. 11 CFR 9033.12 - Production of computerized information.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... conform to the technical specifications, including file requirements, described in the Federal Election Commission's Computerized Magnetic Media Requirements for title 26 Candidates/Committees Receiving Federal... outstanding campaign obligations. (b) Organization of computerized information and technical specifications...

  20. 11 CFR 9033.12 - Production of computerized information.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... conform to the technical specifications, including file requirements, described in the Federal Election Commission's Computerized Magnetic Media Requirements for title 26 Candidates/Committees Receiving Federal... outstanding campaign obligations. (b) Organization of computerized information and technical specifications...

  1. 11 CFR 9033.12 - Production of computerized information.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... conform to the technical specifications, including file requirements, described in the Federal Election Commission's Computerized Magnetic Media Requirements for title 26 Candidates/Committees Receiving Federal... outstanding campaign obligations. (b) Organization of computerized information and technical specifications...

  2. Japan-Specific Key Regulatory Aspects for Development of New Biopharmaceutical Drug Products.

    PubMed

    Desai, Kashappa Goud; Obayashi, Hirokazu; Colandene, James D; Nesta, Douglas P

    2018-03-28

    Japan represents the third largest pharmaceutical market in the world. Developing a new biopharmaceutical drug product for the Japanese market is a top business priority for global pharmaceutical companies while aligning with ethical drivers to treat more patients in need. Understanding Japan-specific key regulatory requirements is essential to achieve successful approvals. Understanding the full context of Japan-specific regulatory requirements/expectations is challenging to global pharmaceutical companies due to differences in language and culture. This article summarizes key Japan-specific regulatory aspects/requirements/expectations applicable to new drug development, approval, and postapproval phases. Formulation excipients should meet Japan compendial requirements with respect to the type of excipient, excipient grade, and excipient concentration. Preclinical safety assessments needed to support clinical phases I, II, and III development are summarized. Japanese regulatory authorities have taken appropriate steps to consider foreign clinical data, thereby enabling accelerated drug development and approval in Japan. Other important topics summarized in this article include: Japan new drug application-specific bracketing strategies for critical and noncritical aspects of the manufacturing process, regulatory requirements related to stability studies, release specifications and testing methods, standard processes involved in pre and postapproval inspections, management of postapproval changes, and Japan regulatory authority's consultation services available to global pharmaceutical companies. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  3. Extrusion energy and pressure requirements

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bhattacharya, M.; Hanna, M.A.

    1984-01-01

    Corn gluten meal samples at moisture contents of 14, 20 and 26% dry basis were extruded at barrel temperatures of 120, 145 and 170/sup 0/C with screw speeds of 100, 150 and 200 rpm. The specific energy requirements and specific operating pressure decreases as the moisture content and temperature were increased. The effect of screw speed on specific energy and pressure was inconclusive.

  4. Space station needs, attributes and architectural options study. Volume 3: Requirements

    NASA Technical Reports Server (NTRS)

    1983-01-01

    A typical system specification format is presented and requirements are compiled. A Program Specification Tree is shown showing a high inclination space station and a low inclination space station with their typical element breakdown, also represented along the top blocks are the interfaces with other systems. The specification format is directed at the Low Inclination space station.

  5. Flight Guidance System Validation Using SPIN

    NASA Technical Reports Server (NTRS)

    Naydich, Dimitri; Nowakowski, John

    1998-01-01

    To verify the requirements for the mode control logic of a Flight Guidance System (FGS) we applied SPIN, a widely used software package that supports the formal verification of distributed systems. These requirements, collectively called the FGS specification, were developed at Rockwell Avionics & Communications and expressed in terms of the Consortium Requirements Engineering (CoRE) method. The properties to be verified are the invariants formulated in the FGS specification, along with the standard properties of consistency and completeness. The project had two stages. First, the FGS specification and the properties to be verified were reformulated in PROMELA, the input language of SPIN. This involved a semantics issue, as some constructs of the FGS specification do not have well-defined semantics in CoRE. Then we attempted to verify the requirements' properties using the automatic model checking facilities of SPIN. Due to the large size of the state space of the FGS specification an exhaustive state space analysis with SPIN turned out to be impossible. So we used the supertrace model checking procedure of SPIN that provides for a partial analysis of the state space. During this process, we found some subtle errors in the FGS specification.

  6. 75 FR 24692 - Notice of Receipt of a Pesticide Petition Requesting a Temporary Exemption From the Requirement...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-05

    ... a tolerance for E. coli 0157:H7 specific bacteriophages used on food-contact surfaces in food... from the requirement of a tolerance for E. coli 0157:H7 specific bacteriophages used on food-contact... establish an exemption from the requirement of a tolerance for residues of the antimicrobial, E. coli 0157...

  7. Zygotic LvBMP5-8 is required for skeletal patterning and for left-right but not dorsal-ventral specification in the sea urchin embryo.

    PubMed

    Piacentino, Michael L; Chung, Oliver; Ramachandran, Janani; Zuch, Daniel T; Yu, Jia; Conaway, Evan A; Reyna, Arlene E; Bradham, Cynthia A

    2016-04-01

    Skeletal patterning in the sea urchin embryo requires coordinated signaling between the pattern-dictating ectoderm and the skeletogenic primary mesenchyme cells (PMCs); recent studies have begun to uncover the molecular basis for this process. Using an unbiased RNA-Seq-based screen, we have previously identified the TGF-ß superfamily ligand, LvBMP5-8, as a skeletal patterning gene in Lytechinus variegatus embryos. This result is surprising, since both BMP5-8 and BMP2/4 ligands have been implicated in sea urchin dorsal-ventral (DV) and left-right (LR) axis specification. Here, we demonstrate that zygotic LvBMP5-8 is required for normal skeletal patterning on the left side, as well as for normal PMC positioning during gastrulation. Zygotic LvBMP5-8 is required for expression of the left-side marker soxE, suggesting that LvBMP5-8 is required for left-side specification. Interestingly, we also find that LvBMP5-8 knockdown suppresses serotonergic neurogenesis on the left side. While LvBMP5-8 overexpression is sufficient to dorsalize embryos, we find that zygotic LvBMP5-8 is not required for normal DV specification or development. In addition, ectopic LvBMP5-8 does not dorsalize LvBMP2/4 morphant embryos, indicating that, in the absence of BMP2/4, BMP5-8 is insufficient to specify dorsal. Taken together, our data demonstrate that zygotic LvBMP5-8 signaling is essential for left-side specification, and for normal left-side skeletal and neural patterning, but not for DV specification. Thus, while both BMP2/4 and BMP5-8 regulate LR axis specification, BMP2/4 but not zygotic BMP5-8 regulates DV axis specification in sea urchin embryos. Copyright © 2016 Elsevier Inc. All rights reserved.

  8. Government Contractors and Sticky SGA Costs

    DTIC Science & Technology

    2015-04-30

    supply generic products such as toothpaste which do not require satisfying unique federal requirements (and related paperwork). For these reasons... toothpaste . Proctor and Gamble may not need to deal with issues involving government-specific specifications and may have minimal incremental paperwork

  9. 21 CFR 73.2400 - Pyrophyllite.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2400 Pyrophyllite. (a) Identity and specifications. The color additive pyrophyllite shall conform in identity and specifications to the requirements of § 73... applied cosmetics, in amounts consistent with good manufacturing practice. (c) Labeling requirements. The...

  10. The stylar 120 kDa glycoprotein is required for S-specific pollen rejection in Nicotiana.

    PubMed

    Hancock, C Nathan; Kent, Lia; McClure, Bruce A

    2005-09-01

    S-RNase participates in at least three mechanisms of pollen rejection. It functions in S-specific pollen rejection (self-incompatibility) and in at least two distinct interspecific mechanisms of pollen rejection in Nicotiana. S-specific pollen rejection and rejection of pollen from Nicotiana plumbaginifolia also require additional stylar proteins. Transmitting-tract-specific (TTS) protein, 120 kDa glycoprotein (120K) and pistil extensin-like protein III (PELP III) are stylar glycoproteins that bind S-RNase in vitro and are also known to interact with pollen. Here we tested whether these glycoproteins have a direct role in pollen rejection. 120K shows the most polymorphism in size between Nicotiana species. Larger 120K-like proteins are often correlated with S-specific pollen rejection. Sequencing results suggest that the polymorphism primarily reflects differences in glycosylation, although indels also occur in the predicted polypeptides. Using RNA interference (RNAi), we suppressed expression of 120K to determine if it is required for S-specific pollen rejection. Transgenic SC N. plumbaginifolia x SI Nicotiana alata (S105S105 or SC10SC10) hybrids with no detectable 120K were unable to perform S-specific pollen rejection. Thus, 120K has a direct role in S-specific pollen rejection. However, suppression of 120K had no effect on rejection of N. plumbaginifolia pollen. In contrast, suppression of HT-B, a factor previously implicated in S-specific pollen rejection, disrupts rejection of N. plumbaginifolia pollen. Thus, S-specific pollen rejection and rejection of N. plumbaginifolia pollen are mechanistically distinct, because they require different non-S-RNase factors.

  11. Metal- and intermetallic-matrix composites for aerospace propulsion and power systems

    NASA Astrophysics Data System (ADS)

    Doychak, J.

    1992-06-01

    Successful development and deployment of metal-matrix composites and intermetallic- matrix composites are critical to reaching the goals of many advanced aerospace propulsion and power development programs. The material requirements are based on the aerospace propulsion and power system requirements, economics, and other factors. Advanced military and civilian aircraft engines will require higher specific strength materials that operate at higher temperatures, and the civilian engines will also require long lifetimes. The specific space propulsion and power applications require hightemperature, high-thermal-conductivity, and high-strength materials. Metal-matrix composites and intermetallic-matrix composites either fulfill or have the potential of fulfilling these requirements.

  12. ASRDI Oxygen Technology Survey. Volume 2: Cleaning Requirements, Procedures, and Verification Techniques

    NASA Technical Reports Server (NTRS)

    Bankaitis, H.; Schueller, C. F.

    1972-01-01

    The oxygen system cleaning specifications drawn from 23 industrial and government sources are presented along with cleaning processes employed for meeting these specifications, and recommended postcleaning inspection procedures for establishing the cleanliness achieved. Areas of agreement and difference in the specifications, procedures, and inspection are examined. Also, the lack of clarity or specificity will be discussed. This absence of clarity represents potential safety hazards due to misinterpretation. It can result in exorbitant expenditures of time and money in satisfying unnecessary requirements.

  13. Life sciences payload definition and integration study, task C and D. Volume 4: Preliminary equipment item specification catalog

    NASA Technical Reports Server (NTRS)

    1973-01-01

    A specification catalog to define the equipment to be used for conducting life sciences experiments in a space laboratory is presented. The specification sheets list the purpose of the equipment item, and any specific technical requirements which can be identified. The status of similar hardware for ground use is stated with comments regarding modifications required to achieve spaceflight qualified hardware. Pertinent sketches, commercial catalog sheets, or drawings of the applicable equipment are included.

  14. Designing Specification Languages for Process Control Systems: Lessons Learned and Steps to the Future

    NASA Technical Reports Server (NTRS)

    Leveson, Nancy G.; Heimdahl, Mats P. E.; Reese, Jon Damon

    1999-01-01

    Previously, we defined a blackbox formal system modeling language called RSML (Requirements State Machine Language). The language was developed over several years while specifying the system requirements for a collision avoidance system for commercial passenger aircraft. During the language development, we received continual feedback and evaluation by FAA employees and industry representatives, which helped us to produce a specification language that is easily learned and used by application experts. Since the completion of the PSML project, we have continued our research on specification languages. This research is part of a larger effort to investigate the more general problem of providing tools to assist in developing embedded systems. Our latest experimental toolset is called SpecTRM (Specification Tools and Requirements Methodology), and the formal specification language is SpecTRM-RL (SpecTRM Requirements Language). This paper describes what we have learned from our use of RSML and how those lessons were applied to the design of SpecTRM-RL. We discuss our goals for SpecTRM-RL and the design features that support each of these goals.

  15. Expanding the Availability of Lightweight Aluminum Alloy Armor Plate Procured from Detailed Military Specifications

    NASA Astrophysics Data System (ADS)

    Doherty, Kevin; Squillacioti, Richard; Cheeseman, Bryan; Placzankis, Brian; Gallardy, Denver

    For many years, the range of aluminum alloys for armor plate applications obtainable in accordance with detailed military specifications was very limited. However, the development of improved aluminum alloys for aerospace and other applications has provided an opportunity to modernize the Army portfolio for ground vehicle armor applications. While the benefits of offering additional alloy choices to vehicle designers is obvious, the process of creating detailed military specifications for armor plate applications is not trivial. A significant amount of material and testing is required to develop the details required by an armor plate specification. Due to the vast number of material programs that require standardization and with a limited amount of manpower and funds as a result of Standardization Reform in 1995, one typically requires a need statement from a vehicle program office to justify and sponsor the work. This presentation will focus on recent aluminum alloy armor plate specifications that have added capability to vehicle designers' selection of armor materials that offer possible benefits such as lower cost, higher strength, better ballistic and corrosion resistance, improved weldability, etc.

  16. W-026, Waste Receiving and Processing Facility data management system validation and verification report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Palmer, M.E.

    1997-12-05

    This V and V Report includes analysis of two revisions of the DMS [data management system] System Requirements Specification (SRS) and the Preliminary System Design Document (PSDD); the source code for the DMS Communication Module (DMSCOM) messages; the source code for selected DMS Screens, and the code for the BWAS Simulator. BDM Federal analysts used a series of matrices to: compare the requirements in the System Requirements Specification (SRS) to the specifications found in the System Design Document (SDD), to ensure the design supports the business functions, compare the discreet parts of the SDD with each other, to ensure thatmore » the design is consistent and cohesive, compare the source code of the DMS Communication Module with the specifications, to ensure that the resultant messages will support the design, compare the source code of selected screens to the specifications to ensure that resultant system screens will support the design, compare the source code of the BWAS simulator with the requirements to interface with DMS messages and data transfers relating to the BWAS operations.« less

  17. Block 4 solar cell module design and test specification for residential applications

    NASA Technical Reports Server (NTRS)

    1978-01-01

    Near-term design, qualification and acceptance requirements are provided for terrestrial solar cell modules suitable for incorporation in photovoltaic power sources (2 kW to 10 kW) applied to single family residential installations. Requirement levels and recommended design limits for selected performance criteria are specified for modules intended principally for rooftop installations. Modules satisfying the requirements of this specification fall into one of two categories, residential panel or residential shingle, both meeting general performance requirements plus additional category peculiar constraints.

  18. Software requirements specification for the GIS-T/ISTEA pooled fund study phase C linear referencing engine

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Amai, W.; Espinoza, J. Jr.; Fletcher, D.R.

    1997-06-01

    This Software Requirements Specification (SRS) describes the features to be provided by the software for the GIS-T/ISTEA Pooled Fund Study Phase C Linear Referencing Engine project. This document conforms to the recommendations of IEEE Standard 830-1984, IEEE Guide to Software Requirements Specification (Institute of Electrical and Electronics Engineers, Inc., 1984). The software specified in this SRS is a proof-of-concept implementation of the Linear Referencing Engine as described in the GIS-T/ISTEA pooled Fund Study Phase B Summary, specifically Sheet 13 of the Phase B object model. The software allows an operator to convert between two linear referencing methods and a datummore » network.« less

  19. 21 CFR 73.2575 - Titanium dioxide.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... consistent with good manufacturing practice. (c) Labeling requirements. The color additive and any mixtures... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2575 Titanium dioxide. (a) Identity and specifications. The color additive titanium dioxide shall conform in identity and specifications to the requirements...

  20. 23 CFR 230.109 - Implementation of specific Equal Employment Opportunity requirements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Implementation of specific Equal Employment Opportunity requirements. 230.109 Section 230.109 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... amended at 51 FR 22800, June 23, 1986] ...

  1. 23 CFR 230.109 - Implementation of specific Equal Employment Opportunity requirements.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 23 Highways 1 2011-04-01 2011-04-01 false Implementation of specific Equal Employment Opportunity requirements. 230.109 Section 230.109 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... amended at 51 FR 22800, June 23, 1986] ...

  2. 23 CFR 230.109 - Implementation of specific Equal Employment Opportunity requirements.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 23 Highways 1 2014-04-01 2014-04-01 false Implementation of specific Equal Employment Opportunity requirements. 230.109 Section 230.109 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... amended at 51 FR 22800, June 23, 1986] ...

  3. 23 CFR 230.109 - Implementation of specific Equal Employment Opportunity requirements.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 23 Highways 1 2013-04-01 2013-04-01 false Implementation of specific Equal Employment Opportunity requirements. 230.109 Section 230.109 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... amended at 51 FR 22800, June 23, 1986] ...

  4. Aerospace applications of batteries

    NASA Technical Reports Server (NTRS)

    Habib, Shahid

    1993-01-01

    NASA has developed battery technology to meet the demanding requirements for aerospace applications; specifically, the space vacuum, launch loads, and high duty cycles. Because of unique requirements and operating environments associated with space applications, NASA has written its own standards and specifications for batteries.

  5. 40 CFR 761.372 - Specific requirements for relatively clean surfaces.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Specific requirements for relatively clean surfaces. 761.372 Section 761.372 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT POLYCHLORINATED BIPHENYLS (PCBs) MANUFACTURING, PROCESSING...

  6. 46 CFR 107.305 - Plans and information.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... systems. Marine Engineering (z) Plans required for marine engineering equipment and systems by Subchapter F of this chapter. Electrical Engineering (aa) Plans required for electrical engineering equipment... materials that do not conform to ABS or ASTM specifications, complete specifications, including chemical and...

  7. System requirement specification for the IH-10 Integrated Corridor Management System (ICMS) in San Antonio, Texas

    DOT National Transportation Integrated Search

    2008-03-31

    This Requirements Specification Document (RSD) was developed under the project titled TransGuide Integrated Corridor Management Stage 1 as part of the United States Department of Transportation (USDOT) Integrated Corridor Management (ICM) p...

  8. 75 FR 1276 - Requirements for Subsurface Safety Valve Equipment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-11

    ...-0066] RIN 1010-AD45 Requirements for Subsurface Safety Valve Equipment AGENCY: Minerals Management... Edition of the American Petroleum Institute's Specification for Subsurface Safety Valve Equipment (API... 14A, Specification for Subsurface Safety Valve Equipment, Eleventh Edition, October 2005, Effective...

  9. 42 CFR 37.93 - Approval of spirometry facilities.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... EXAMINATIONS SPECIFICATIONS FOR MEDICAL EXAMINATIONS OF COAL MINERS Spirometry Examinations § 37.93 Approval of...-approved facilities must meet the requirements specified in this subpart for the following activities... meet required specifications; collecting the respiratory assessment form; transmitting data to NIOSH...

  10. The National Map seamless digital elevation model specifications

    USGS Publications Warehouse

    Archuleta, Christy-Ann M.; Constance, Eric W.; Arundel, Samantha T.; Lowe, Amanda J.; Mantey, Kimberly S.; Phillips, Lori A.

    2017-08-02

    This specification documents the requirements and standards used to produce the seamless elevation layers for The National Map of the United States. Seamless elevation data are available for the conterminous United States, Hawaii, Alaska, and the U.S. territories, in three different resolutions—1/3-arc-second, 1-arc-second, and 2-arc-second. These specifications include requirements and standards information about source data requirements, spatial reference system, distribution tiling schemes, horizontal resolution, vertical accuracy, digital elevation model surface treatment, georeferencing, data source and tile dates, distribution and supporting file formats, void areas, metadata, spatial metadata, and quality assurance and control.

  11. Advanced computer architecture specification for automated weld systems

    NASA Technical Reports Server (NTRS)

    Katsinis, Constantine

    1994-01-01

    This report describes the requirements for an advanced automated weld system and the associated computer architecture, and defines the overall system specification from a broad perspective. According to the requirements of welding procedures as they relate to an integrated multiaxis motion control and sensor architecture, the computer system requirements are developed based on a proven multiple-processor architecture with an expandable, distributed-memory, single global bus architecture, containing individual processors which are assigned to specific tasks that support sensor or control processes. The specified architecture is sufficiently flexible to integrate previously developed equipment, be upgradable and allow on-site modifications.

  12. BRD usability requirements

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Deshpande, Alina

    2015-03-12

    This document describes the usability requirements for the Biosurveillance resource directory (BRD); that is, who will be using the tool and what tasks they will be using it for. It does not include information on technical implementation (e.g., whether specific information is contained in the database or pulled on demand from other sources). It also avoids specific design ideas (such as widget descriptions) unless they are necessary to illustrate a requirement.

  13. Specification of select hypothalamic circuits and innate behaviors by the embryonic patterning gene Dbx1

    PubMed Central

    Sokolowski, Katie; Esumi, Shigeyuki; Hirata, Tsutomu; Kamal, Yasman; Tran, Tuyen; Lam, Andrew; Oboti, Livio; Brighthaupt, Sherri-Chanelle; Zaghlula, Manar; Martinez, Jennifer; Ghimbovschi, Svetlana; Knoblach, Susan; Pierani, Alessandra; Tamamaki, Nobuaki; Shah, Nirao M; Jones, Kevin S; Corbin, Joshua G

    2015-01-01

    SUMMARY The hypothalamus integrates information required for the production of a variety of innate behaviors such as feeding, mating, aggression and predator avoidance. Despite an extensive knowledge of hypothalamic function, how embryonic genetic programs specify circuits that regulate these behaviors remains unknown. Here, we find that in the hypothalamus the developmentally regulated homeodomain-containing transcription factor Dbx1 is required for the generation of specific subclasses of neurons within the lateral hypothalamic area/zona incerta (LH) and the arcuate (Arc) nucleus. Consistent with this specific developmental role, Dbx1 hypothalamic-specific conditional-knockout mice display attenuated responses to predator odor and feeding stressors but do not display deficits in other innate behaviors such as mating or conspecific aggression. Thus, activity of a single developmentally regulated gene, Dbx1, is a shared requirement for the specification of hypothalamic nuclei governing a subset of innate behaviors. PMID:25864637

  14. Manufacturing plastic injection optical molds

    NASA Astrophysics Data System (ADS)

    Bourque, David

    2008-08-01

    ABCO Tool & Die, Inc. is a mold manufacturer specializing in the manufacturing of plastic injection molds for molded optical parts. The purpose of this presentation is to explain the concepts and procedures required to build a mold that produces precision optical parts. Optical molds can produce a variety of molded parts ranging from safety eyewear to sophisticated military lens parts, which must meet precise optical specifications. The manufacturing of these molds begins with the design engineering of precision optical components. The mold design and the related optical inserts are determined based upon the specific optical criteria and optical surface geometry. The mold manufacturing techniques will be based upon the optical surface geometry requirements and specific details. Manufacturing processes used will be specific to prescribed geometrical surface requirements of the molded part. The combined efforts result in a robust optical mold which can produce molded parts that meet the most precise optical specifications.

  15. 49 CFR 179.221 - Individual specification requirements applicable to tank car tanks consisting of an inner...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Individual specification requirements applicable to tank car tanks consisting of an inner container supported within an outer shell. 179.221 Section... within an outer shell. ...

  16. 45 CFR 162.412 - Implementation specifications: Health plans.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 45 Public Welfare 1 2013-10-01 2013-10-01 false Implementation specifications: Health plans. 162.412 Section 162.412 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES ADMINISTRATIVE DATA STANDARDS AND RELATED REQUIREMENTS ADMINISTRATIVE REQUIREMENTS Standard Unique Health Identifier for Health...

  17. 45 CFR 162.412 - Implementation specifications: Health plans.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 45 Public Welfare 1 2011-10-01 2011-10-01 false Implementation specifications: Health plans. 162.412 Section 162.412 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES ADMINISTRATIVE DATA STANDARDS AND RELATED REQUIREMENTS ADMINISTRATIVE REQUIREMENTS Standard Unique Health Identifier for Health...

  18. 45 CFR 162.414 - Implementation specifications: Health care clearinghouses.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 45 Public Welfare 1 2013-10-01 2013-10-01 false Implementation specifications: Health care clearinghouses. 162.414 Section 162.414 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES ADMINISTRATIVE DATA STANDARDS AND RELATED REQUIREMENTS ADMINISTRATIVE REQUIREMENTS Standard Unique Health Identifier...

  19. 45 CFR 162.512 - Implementation specifications: Health plans.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 45 Public Welfare 1 2012-10-01 2012-10-01 false Implementation specifications: Health plans. 162.512 Section 162.512 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES ADMINISTRATIVE DATA STANDARDS AND RELATED REQUIREMENTS ADMINISTRATIVE REQUIREMENTS Standard Unique Health Identifier for Health...

  20. 45 CFR 162.412 - Implementation specifications: Health plans.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false Implementation specifications: Health plans. 162.412 Section 162.412 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES ADMINISTRATIVE DATA STANDARDS AND RELATED REQUIREMENTS ADMINISTRATIVE REQUIREMENTS Standard Unique Health Identifier for Health...

  1. 45 CFR 162.412 - Implementation specifications: Health plans.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 45 Public Welfare 1 2012-10-01 2012-10-01 false Implementation specifications: Health plans. 162.412 Section 162.412 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES ADMINISTRATIVE DATA STANDARDS AND RELATED REQUIREMENTS ADMINISTRATIVE REQUIREMENTS Standard Unique Health Identifier for Health...

  2. 45 CFR 162.412 - Implementation specifications: Health plans.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 45 Public Welfare 1 2014-10-01 2014-10-01 false Implementation specifications: Health plans. 162.412 Section 162.412 Public Welfare Department of Health and Human Services ADMINISTRATIVE DATA STANDARDS AND RELATED REQUIREMENTS ADMINISTRATIVE REQUIREMENTS Standard Unique Health Identifier for Health...

  3. 45 CFR 162.410 - Implementation specifications: Health care providers.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 45 Public Welfare 1 2014-10-01 2014-10-01 false Implementation specifications: Health care providers. 162.410 Section 162.410 Public Welfare Department of Health and Human Services ADMINISTRATIVE DATA STANDARDS AND RELATED REQUIREMENTS ADMINISTRATIVE REQUIREMENTS Standard Unique Health Identifier...

  4. 45 CFR 162.512 - Implementation specifications: Health plans.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 45 Public Welfare 1 2014-10-01 2014-10-01 false Implementation specifications: Health plans. 162.512 Section 162.512 Public Welfare Department of Health and Human Services ADMINISTRATIVE DATA STANDARDS AND RELATED REQUIREMENTS ADMINISTRATIVE REQUIREMENTS Standard Unique Health Identifier for Health...

  5. 45 CFR 162.512 - Implementation specifications: Health plans.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 45 Public Welfare 1 2013-10-01 2013-10-01 false Implementation specifications: Health plans. 162.512 Section 162.512 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES ADMINISTRATIVE DATA STANDARDS AND RELATED REQUIREMENTS ADMINISTRATIVE REQUIREMENTS Standard Unique Health Identifier for Health...

  6. 45 CFR 162.410 - Implementation specifications: Health care providers.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 45 Public Welfare 1 2013-10-01 2013-10-01 false Implementation specifications: Health care providers. 162.410 Section 162.410 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES ADMINISTRATIVE DATA STANDARDS AND RELATED REQUIREMENTS ADMINISTRATIVE REQUIREMENTS Standard Unique Health Identifier...

  7. 45 CFR 162.414 - Implementation specifications: Health care clearinghouses.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 45 Public Welfare 1 2014-10-01 2014-10-01 false Implementation specifications: Health care clearinghouses. 162.414 Section 162.414 Public Welfare Department of Health and Human Services ADMINISTRATIVE DATA STANDARDS AND RELATED REQUIREMENTS ADMINISTRATIVE REQUIREMENTS Standard Unique Health Identifier...

  8. 24 CFR 3280.904 - Specific requirements for designing the transportation system.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... the transportation system. 3280.904 Section 3280.904 Housing and Urban Development Regulations... SAFETY STANDARDS Transportation § 3280.904 Specific requirements for designing the transportation system. (a) General. The entire system (frame, drawbar and coupling mechanism, running gear assembly, and...

  9. 40 CFR 266.70 - Applicability and requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) STANDARDS FOR THE MANAGEMENT OF SPECIFIC HAZARDOUS WASTES AND SPECIFIC TYPES OF HAZARDOUS WASTE... requirements. (a) The regulations of this subpart apply to recyclable materials that are reclaimed to recover economically significant amounts of gold, silver, platinum, palladium, iridium, osmium, rhodium, ruthenium, or...

  10. 75 FR 34181 - Connecticut Yankee Atomic Power Company, Haddam Neck Plant, Independent Spent Fuel Storage...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-16

    ... Specification (TS) Surveillance Requirement 3.1.6.1 to verify the operability of the concrete cask heat removal... Specification (TS) Surveillance Requirement 3.1.6.1 to verify the operability of the concrete cask heat removal...

  11. Formal Specification of Information Systems Requirements.

    ERIC Educational Resources Information Center

    Kampfner, Roberto R.

    1985-01-01

    Presents a formal model for specification of logical requirements of computer-based information systems that incorporates structural and dynamic aspects based on two separate models: the Logical Information Processing Structure and the Logical Information Processing Network. The model's role in systems development is discussed. (MBR)

  12. Transitioning from conceptual design to construction performance specification

    NASA Astrophysics Data System (ADS)

    Jeffers, Paul; Warner, Mark; Craig, Simon; Hubbard, Robert; Marshall, Heather

    2012-09-01

    On successful completion of a conceptual design review by a funding agency or customer, there is a transition phase before construction contracts can be placed. The nature of this transition phase depends on the Project's approach to construction and the particular subsystem being considered. There are generically two approaches; project retention of design authority and issuance of build to print contracts, or issuance of subsystem performance specifications with controlled interfaces. This paper relates to the latter where a proof of concept (conceptual or reference design) is translated into performance based sub-system specifications for competitive tender. This translation is not a straightforward process and there are a number of different issues to consider in the process. This paper deals with primarily the Telescope mount and Enclosure subsystems. The main subjects considered in this paper are: • Typical status of design at Conceptual Design Review compared with the desired status of Specifications and Interface Control Documents at Request for Quotation. • Options for capture and tracking of system requirements flow down from science / operating requirements and sub-system requirements, and functional requirements derived from reference design. • Requirements that may come specifically from the contracting approach. • Methods for effective use of reference design work without compromising a performance based specification. • Management of project team's expectation relating to design. • Effects on cost estimates from reference design to actual. This paper is based on experience and lessons learned through this process on both the VISTA and the ATST projects.

  13. IT Infrastructure Components for Biobanking

    PubMed Central

    Prokosch, H.U.; Beck, A.; Ganslandt, T.; Hummel, M.; Kiehntopf, M.; Sax, U.; Ückert, F.; Semler, S.

    2010-01-01

    Objective Within translational research projects in the recent years large biobanks have been established, mostly supported by homegrown, proprietary software solutions. No general requirements for biobanking IT infrastructures have been published yet. This paper presents an exemplary biobanking IT architecture, a requirements specification for a biorepository management tool and exemplary illustrations of three major types of requirements. Methods We have pursued a comprehensive literature review for biobanking IT solutions and established an interdisciplinary expert panel for creating the requirements specification. The exemplary illustrations were derived from a requirements analysis within two university hospitals. Results The requirements specification comprises a catalog with more than 130 detailed requirements grouped into 3 major categories and 20 subcategories. Special attention is given to multitenancy capabilities in order to support the project-specific definition of varying research and bio-banking contexts, the definition of workflows to track sample processing, sample transportation and sample storage and the automated integration of preanalytic handling and storage robots. Conclusion IT support for biobanking projects can be based on a federated architectural framework comprising primary data sources for clinical annotations, a pseudonymization service, a clinical data warehouse with a flexible and user-friendly query interface and a biorepository management system. Flexibility and scalability of all such components are vital since large medical facilities such as university hospitals will have to support biobanking for varying monocentric and multicentric research scenarios and multiple medical clients. PMID:23616851

  14. IT Infrastructure Components for Biobanking.

    PubMed

    Prokosch, H U; Beck, A; Ganslandt, T; Hummel, M; Kiehntopf, M; Sax, U; Uckert, F; Semler, S

    2010-01-01

    Within translational research projects in the recent years large biobanks have been established, mostly supported by homegrown, proprietary software solutions. No general requirements for biobanking IT infrastructures have been published yet. This paper presents an exemplary biobanking IT architecture, a requirements specification for a biorepository management tool and exemplary illustrations of three major types of requirements. We have pursued a comprehensive literature review for biobanking IT solutions and established an interdisciplinary expert panel for creating the requirements specification. The exemplary illustrations were derived from a requirements analysis within two university hospitals. The requirements specification comprises a catalog with more than 130 detailed requirements grouped into 3 major categories and 20 subcategories. Special attention is given to multitenancy capabilities in order to support the project-specific definition of varying research and bio-banking contexts, the definition of workflows to track sample processing, sample transportation and sample storage and the automated integration of preanalytic handling and storage robots. IT support for biobanking projects can be based on a federated architectural framework comprising primary data sources for clinical annotations, a pseudonymization service, a clinical data warehouse with a flexible and user-friendly query interface and a biorepository management system. Flexibility and scalability of all such components are vital since large medical facilities such as university hospitals will have to support biobanking for varying monocentric and multicentric research scenarios and multiple medical clients.

  15. Digital orthoimagery base specification V1.0

    USGS Publications Warehouse

    Rufe, Philip P.

    2014-01-01

    The resolution requirement for orthoimagery in support of the The National Map of the U.S. Geological Survey (USGS) is 1 meter. However, as the Office of Management and Budget A-16 designated Federal agency responsible for base orthoimagery, the USGS National Geospatial Program (NGP) has developed this base specification to include higher resolution orthoimagery. Many Federal, State, and local programs use high-resolution orthoimagery for various purposes including critical infrastructure management, vector data updates, land-use analysis, natural resource inventory, and extraction of data. The complex nature of large-area orthoimagery datasets, combined with the broad interest in orthoimagery, which is of consistent quality and spatial accuracy, requires high-resolution orthoimagery to meet or exceed the format and content outlined in this specification. The USGS intends to use this specification primarily to create consistency across all NGP funded and managed orthoimagery collections, in particular, collections in support of the National Digital Orthoimagery Program (NDOP). In the absence of other comprehensive specifications or standards, the USGS intends that this specification will, to the highest degree practical, be adopted by other USGS programs and mission areas, and by other Federal agencies. This base specification, defining minimum parameters for orthoimagery data collection. Local conditions in any given project area, specialized applications for the data, or the preferences of cooperators, may mandate more stringent requirements. The USGS fully supports the acquisition of more detailed, accurate, or value-added data that exceed the base specification outlined herein. A partial list of common “buy-up” options is provided in appendix 1 for those areas and projects that require more stringent or expanded specifications.

  16. Crew interface specifications development functions, phase 3A

    NASA Technical Reports Server (NTRS)

    Carl, J. G.

    1973-01-01

    The findings and data products developed during the crew interface specification study for inflight maintenance and stowage functions are presented. Guidelines are provided for improving the present progress of defining, controlling, and managing the flight crew requirements. The following data products were developed: (1) description of inflight maintenance management process, (2) specifications for inflight maintenance management requirements, and (3) suggested inflight maintenance data processing reports for logistics management.

  17. A dermal HOX transcriptional program regulates site-specific epidermal fate

    PubMed Central

    Rinn, John L.; Wang, Jordon K.; Allen, Nancy; Brugmann, Samantha A.; Mikels, Amanda J.; Liu, Helen; Ridky, Todd W.; Stadler, H. Scott; Nusse, Roel; Helms, Jill A.; Chang, Howard Y.

    2008-01-01

    Reciprocal epithelial–mesenchymal interactions shape site-specific development of skin. Here we show that site-specific HOX expression in fibroblasts is cell-autonomous and epigenetically maintained. The distal-specific gene HOXA13 is continually required to maintain the distal-specific transcriptional program in adult fibroblasts, including expression of WNT5A, a morphogen required for distal development. The ability of distal fibroblasts to induce epidermal keratin 9, a distal-specific gene, is abrogated by depletion of HOXA13, but rescued by addition of WNT5A. Thus, maintenance of appropriate HOX transcriptional program in adult fibroblasts may serve as a source of positional memory to differentially pattern the epithelia during homeostasis and regeneration. PMID:18245445

  18. A dermal HOX transcriptional program regulates site-specific epidermal fate.

    PubMed

    Rinn, John L; Wang, Jordon K; Allen, Nancy; Brugmann, Samantha A; Mikels, Amanda J; Liu, Helen; Ridky, Todd W; Stadler, H Scott; Nusse, Roel; Helms, Jill A; Chang, Howard Y

    2008-02-01

    Reciprocal epithelial-mesenchymal interactions shape site-specific development of skin. Here we show that site-specific HOX expression in fibroblasts is cell-autonomous and epigenetically maintained. The distal-specific gene HOXA13 is continually required to maintain the distal-specific transcriptional program in adult fibroblasts, including expression of WNT5A, a morphogen required for distal development. The ability of distal fibroblasts to induce epidermal keratin 9, a distal-specific gene, is abrogated by depletion of HOXA13, but rescued by addition of WNT5A. Thus, maintenance of appropriate HOX transcriptional program in adult fibroblasts may serve as a source of positional memory to differentially pattern the epithelia during homeostasis and regeneration.

  19. Connected Vehicle Pilot Deployment Program Phase 1, System Requirements Specification (SyRS) – New York City.

    DOT National Transportation Integrated Search

    2016-07-28

    This document describes the System Requirements Specification (SyRS) for the New York City Department of Transportation (NYC) Connected Vehicle Pilot Deployment (CVPD) Project. This SyRS describes the results of the definition of need, the operationa...

  20. 46 CFR 164.013-3 - Material properties and workmanship.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Foam, Unicellular Polyethylene (Buoyant, Slab... polyethylene foam shall be all new material complying with the requirements outlined in this specification. Unicellular polyethylene foam must comply with the requirements of UL 1191, sections 24, 25, and 26 and its...

  1. 46 CFR 164.013-3 - Material properties and workmanship.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Foam, Unicellular Polyethylene (Buoyant, Slab... polyethylene foam shall be all new material complying with the requirements outlined in this specification. Unicellular polyethylene foam must comply with the requirements of UL 1191, sections 24, 25, and 26 and its...

  2. System requirement specification for the I-15 integrated corridor management system (ICMS) in San Diego, California.

    DOT National Transportation Integrated Search

    2008-03-31

    This document presents a System Requirement Specification for an Integrated Corridor Management System (ICMS) in the I-15 Corridor in San Diego, California. The ICMS will consist of two major subsystems: the existing Intermodal Transportation Managem...

  3. 10 CFR 33.8 - Information collection requirements: OMB approval.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Information collection requirements: OMB approval. 33.8 Section 33.8 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES OF BROAD SCOPE FOR BYPRODUCT..., 1997; 67 FR 67099, Nov. 4, 2002] Specific Licenses of Broad Scope ...

  4. 10 CFR 33.8 - Information collection requirements: OMB approval.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 1 2012-01-01 2012-01-01 false Information collection requirements: OMB approval. 33.8 Section 33.8 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES OF BROAD SCOPE FOR BYPRODUCT..., 1997; 67 FR 67099, Nov. 4, 2002] Specific Licenses of Broad Scope ...

  5. 10 CFR 33.8 - Information collection requirements: OMB approval.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 1 2014-01-01 2014-01-01 false Information collection requirements: OMB approval. 33.8 Section 33.8 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES OF BROAD SCOPE FOR BYPRODUCT..., 1997; 67 FR 67099, Nov. 4, 2002] Specific Licenses of Broad Scope ...

  6. 10 CFR 33.8 - Information collection requirements: OMB approval.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 1 2013-01-01 2013-01-01 false Information collection requirements: OMB approval. 33.8 Section 33.8 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES OF BROAD SCOPE FOR BYPRODUCT..., 1997; 67 FR 67099, Nov. 4, 2002] Specific Licenses of Broad Scope ...

  7. 10 CFR 33.8 - Information collection requirements: OMB approval.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 1 2011-01-01 2011-01-01 false Information collection requirements: OMB approval. 33.8 Section 33.8 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES OF BROAD SCOPE FOR BYPRODUCT..., 1997; 67 FR 67099, Nov. 4, 2002] Specific Licenses of Broad Scope ...

  8. IDC System Specification Document.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Clifford, David J.

    2014-12-01

    This document contains the system specifications derived to satisfy the system requirements found in the IDC System Requirements Document for the IDC Reengineering Phase 2 project. Revisions Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Reengineering Project Team Initial delivery M. Harris

  9. 75 FR 70753 - Market Test Involving Greeting Cards

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-18

    ... businesses will produce and distribute pre-approved envelopes according to specific design requirements which... will produce and distribute pre-approved envelopes with specific design requirements that will be... a market test beginning on or about January 1, 2011, of an experimental market dominant product...

  10. SB certification handout material requirements, test methods, responsibilities, and minimum classification levels for mixture-based specification for flexible base.

    DOT National Transportation Integrated Search

    2012-10-01

    A handout with tables representing the material requirements, test methods, responsibilities, and minimum classification levels mixture-based specification for flexible base and details on aggregate and test methods employed, along with agency and co...

  11. Information Science Panel joint meeting with Imaging Science Panel

    NASA Technical Reports Server (NTRS)

    1982-01-01

    Specific activity in information extraction science (taken to include data handling) is needed to: help identify the bounds of practical missions; identify potential data handling and analysis scenarios; identify the required enabling technology; and identify the requirements for a design data base to be used by the disciplines in determining potential parameters for future missions. It was defined that specific analysis topics were a function of the discipline involved, and therefore no attempt was made to define any specific analysis developments required. Rather, it was recognized that a number of generic data handling requirements exist whose solutions cannot be typically supported by the disciplines. The areas of concern were therefore defined as: data handling aspects of system design considerations; enabling technology for data handling, with specific attention to rectification and registration; and enabling technology for analysis. Within each of these areas, the following topics were addressed: state of the art (current status and contributing factors); critical issues; and recommendations for research and/or development.

  12. The Johnson Space Center Management Information Systems (JSCMIS). 1: Requirements Definition and Design Specifications for Versions 2.1 and 2.1.1. 2: Documented Test Scenario Environments. 3: Security Design and Specifications

    NASA Technical Reports Server (NTRS)

    1986-01-01

    The Johnson Space Center Management Information System (JSCMIS) is an interface to computer data bases at NASA Johnson which allows an authorized user to browse and retrieve information from a variety of sources with minimum effort. This issue gives requirements definition and design specifications for versions 2.1 and 2.1.1, along with documented test scenario environments, and security object design and specifications.

  13. 18 CFR 12.35 - Specific inspection requirements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Specific inspection requirements. 12.35 Section 12.35 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT SAFETY OF WATER POWER PROJECTS AND...

  14. 21 CFR 73.1095 - β-Carotene.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... good manufacturing practice. (c) Labeling requirements. The labeling of the color additive and any... ADDITIVES EXEMPT FROM CERTIFICATION Drugs § 73.1095 β-Carotene. (a) Identity and specifications. (1) The color additive β-carotene shall conform in identity and specifications to the requirements of § 73.95(a...

  15. 7 CFR 58.528 - Microbiological requirements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... based on 3 out of 5 consecutive samples taken at the time of packaging. (a) Coliform. Not more than 10..., GENERAL SPECIFICATIONS FOR APPROVED PLANTS AND STANDARDS FOR GRADES OF DAIRY PRODUCTS 1 General Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Requirements for Cottage...

  16. 7 CFR 58.528 - Microbiological requirements.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... based on 3 out of 5 consecutive samples taken at the time of packaging. (a) Coliform. Not more than 10..., GENERAL SPECIFICATIONS FOR APPROVED PLANTS AND STANDARDS FOR GRADES OF DAIRY PRODUCTS 1 General Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Requirements for Cottage...

  17. 7 CFR 58.528 - Microbiological requirements.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... based on 3 out of 5 consecutive samples taken at the time of packaging. (a) Coliform. Not more than 10..., GENERAL SPECIFICATIONS FOR APPROVED PLANTS AND STANDARDS FOR GRADES OF DAIRY PRODUCTS 1 General Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Requirements for Cottage...

  18. 7 CFR 58.528 - Microbiological requirements.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... based on 3 out of 5 consecutive samples taken at the time of packaging. (a) Coliform. Not more than 10..., GENERAL SPECIFICATIONS FOR APPROVED PLANTS AND STANDARDS FOR GRADES OF DAIRY PRODUCTS 1 General Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Requirements for Cottage...

  19. 78 FR 15303 - Hazardous Materials; Miscellaneous Amendments (RRR)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-11

    ..., designated as sharps, in non-DOT specification containers fitted into wheeled racks. Revise the requirements... regulated medical wastes, designated as sharps, in non-DOT specification containers fitted into wheeled... Code Amendment 35-10, section 5.4.1.4.3.2 requires empty uncleaned packagings, IBCs, bulk containers...

  20. 10 CFR 30.33 - General requirements for issuance of specific licenses.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false General requirements for issuance of specific licenses. 30.33 Section 30.33 Energy NUCLEAR REGULATORY COMMISSION RULES OF GENERAL APPLICABILITY TO DOMESTIC... other benefits against environmental costs and considering available alternatives, that the action...

  1. 10 CFR 30.33 - General requirements for issuance of specific licenses.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 1 2011-01-01 2011-01-01 false General requirements for issuance of specific licenses. 30.33 Section 30.33 Energy NUCLEAR REGULATORY COMMISSION RULES OF GENERAL APPLICABILITY TO DOMESTIC... other benefits against environmental costs and considering available alternatives, that the action...

  2. 30 CFR 22.7 - Specific requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... APPROVAL OF MINING PRODUCTS PORTABLE METHANE DETECTORS § 22.7 Specific requirements. (a) Design. In the... explosion hazard—(1) Detectors. Detectors shall be constructed so that they will not cause external... diameter and are of reasonably thick glass. (4) Battery. If the detector is equipped with a battery, it...

  3. 30 CFR 22.7 - Specific requirements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... APPROVAL OF MINING PRODUCTS PORTABLE METHANE DETECTORS § 22.7 Specific requirements. (a) Design. In the... explosion hazard—(1) Detectors. Detectors shall be constructed so that they will not cause external... diameter and are of reasonably thick glass. (4) Battery. If the detector is equipped with a battery, it...

  4. 30 CFR 22.7 - Specific requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... APPROVAL OF MINING PRODUCTS PORTABLE METHANE DETECTORS § 22.7 Specific requirements. (a) Design. In the... explosion hazard—(1) Detectors. Detectors shall be constructed so that they will not cause external... diameter and are of reasonably thick glass. (4) Battery. If the detector is equipped with a battery, it...

  5. 30 CFR 22.7 - Specific requirements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... APPROVAL OF MINING PRODUCTS PORTABLE METHANE DETECTORS § 22.7 Specific requirements. (a) Design. In the... explosion hazard—(1) Detectors. Detectors shall be constructed so that they will not cause external... diameter and are of reasonably thick glass. (4) Battery. If the detector is equipped with a battery, it...

  6. 40 CFR 35.3135 - Specific capitalization grant agreement requirements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 1 2012-07-01 2012-07-01 false Specific capitalization grant agreement requirements. 35.3135 Section 35.3135 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE STATE AND LOCAL ASSISTANCE State Water Pollution Control Revolving Funds § 35...

  7. 40 CFR 35.3135 - Specific capitalization grant agreement requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Specific capitalization grant agreement requirements. 35.3135 Section 35.3135 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE STATE AND LOCAL ASSISTANCE State Water Pollution Control Revolving Funds § 35...

  8. 40 CFR 35.3135 - Specific capitalization grant agreement requirements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Specific capitalization grant agreement requirements. 35.3135 Section 35.3135 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE STATE AND LOCAL ASSISTANCE State Water Pollution Control Revolving Funds § 35...

  9. 40 CFR 35.3135 - Specific capitalization grant agreement requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 1 2014-07-01 2014-07-01 false Specific capitalization grant agreement requirements. 35.3135 Section 35.3135 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE STATE AND LOCAL ASSISTANCE State Water Pollution Control Revolving Funds § 35...

  10. 46 CFR 189.55-5 - Plans and specifications required for new construction.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...) OCEANOGRAPHIC RESEARCH VESSELS INSPECTION AND CERTIFICATION Plan Approval § 189.55-5 Plans and specifications..., carbon dioxide, foam and sprinkling systems. (e) Marine engineering. For plans required for marine engineering equipment and systems. See Subchapter F (Marine Engineering) of this chapter. (f) Electrical...

  11. 46 CFR 189.55-5 - Plans and specifications required for new construction.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...) OCEANOGRAPHIC RESEARCH VESSELS INSPECTION AND CERTIFICATION Plan Approval § 189.55-5 Plans and specifications..., carbon dioxide, foam and sprinkling systems. (e) Marine engineering. For plans required for marine engineering equipment and systems. See Subchapter F (Marine Engineering) of this chapter. (f) Electrical...

  12. 40 CFR 35.3135 - Specific capitalization grant agreement requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Specific capitalization grant agreement requirements. 35.3135 Section 35.3135 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE STATE AND LOCAL ASSISTANCE State Water Pollution Control Revolving Funds § 35...

  13. An introduction to requirements capture using PVS: Specification of a simple autopilot

    NASA Technical Reports Server (NTRS)

    Butler, Ricky W.

    1996-01-01

    This paper presents an introduction to capturing software requirements in the PVS formal language. The object of study is a simplified digital autopilot that was motivated in part by the mode control panel of NASA Langley's Boeing 737 research aircraft. The paper first presents the requirements for this autopilot in English and then steps the reader through a translation of these requirements into formal mathematics. Along the way deficiencies in the English specification are noted and repaired. Once completed, the formal PVS requirement is analyzed using the PVS theorem prover and shown to maintain an invariant over its state space.

  14. Application Protocol, Initial Graphics Exchange Specification (IGES), Layered Electrical Product

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    O`Connell, L.J.

    1994-12-01

    An application protocol is an information systems engineering view of a specific product The view represents an agreement on the generic activities needed to design and fabricate the product the agreement on the information needed to support those activities, and the specific constructs of a product data standard for use in transferring some or all of the information required. This application protocol describes the data for electrical and electronic products in terms of a product description standard called the Initial Graphics Exchange Specification (IGES). More specifically, the Layered Electrical Product IGES Application Protocol (AP) specifies the mechanisms for defining andmore » exchanging computer-models and their associated data for those products which have been designed in two dimensional geometry so as to be produced as a series of layers in IGES format The AP defines the appropriateness of the data items for describing the geometry of the various parts of a product (shape and location), the connectivity, and the processing and material characteristics. Excluded is the behavioral requirements which the product was intended to satisfy, except as those requirements have been recorded as design rules or product testing requirements.« less

  15. Layered Electrical Product Application Protocol (AP). Draft: Initial Graphics Exchange Specification (IGES)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1994-09-01

    An application protocol is an information systems engineering view of a specific product. The view represents an agreement on the generic activities needed to design and fabricate the product, the agreement on the information needed to support those activities, and the specific constructs of a product data standard for use in transfering some or all of the information required. This applications protocol describes the data for electrical and electronic products in terms of a product description standard called the Initial Graphics Exchange Specification (IGES). More specifically, the Layered Electrical Product IGES Application Protocol (AP) specifies the mechanisms for defining andmore » exchanging computer-models and their associated data for those products which have been designed in two dimensional geometry so as to be produced as a series of layers in IGES format. The AP defines the appropriateness of the data items for describing the geometry of the various parts of a product (shape and location), the connectivity, and the processing and material characteristics. Excluded is the behavioral requirements which the product was intended to satisfy, except as those requirements have been recorded as design rules or product testing requirements.« less

  16. Phase 111A Crew Interface Specifications Development for Inflight Maintenance and Stowage Functions

    NASA Technical Reports Server (NTRS)

    Carl, John G.

    1973-01-01

    This report presents the findings and data products developed during the Phase IIIA Crew Interface Specification Study for Inflight Maintenance and Stowage Functions, performed by General Electric for the NASA, Johnson Space Center with a set of documentation that can be used as definitive guidelines to improve the present process of defining, controlling and managing flight crew interface requirements that are related to inflight maintenance (including assembly and servicing) and stowage functions. During the Phase IIIA contract period, the following data products were developed: 1) Projected NASA Crew Procedures/Flight Data File Development Process. 2) Inflight Maintenance Management Process Description. 3) Preliminary Draft, General Specification, Inflight Maintenance Management Requirements. 4) Inflight Maintenance Operational Process Description. 5) Preliminary Draft, General Specification, Inflight Maintenance Task and Support Requirements Analysis. 6) Suggested IFM Data Processing Reports for Logistics Management The above Inflight Maintenance data products have been developed during the Phase IIIA study after review of Space Shuttle Program Documentation, including the Level II Integrated Logistics Requirements and other DOD and NASA data relative to Payloads Accommodations and Satellite On-Orbit Servicing. These Inflight Maintenance data products were developed to be in consonance with Space Shuttle Program technical and management requirements.

  17. Faying Surface Lubrication Effects on Nut Factors

    NASA Technical Reports Server (NTRS)

    Taylor, Deneen M.; Morrison, Raymond F.

    2006-01-01

    Bolted joint analysis typically is performed using nut factors derived from textbooks and procedures from program requirement documents. Joint specific testing was performed for a critical International Space Station (ISS) joint. Test results indicate that for some configurations the nut factor may be significantly different than accepted textbook values. This paper presents results of joint specific testing to aid in determining if joint specific testing should be performed to insure required preloads are obtained.

  18. DEVS Unified Process for Web-Centric Development and Testing of System of Systems

    DTIC Science & Technology

    2008-05-20

    gathering from the user. Further, methodologies have been developed to generate DEVS models from BPMN /BPEL-based and message-based requirement specifications...27] 3. BPMN /BPEL based system specifications: Business Process Modeling Notation ( BPMN ) [bpm] or Business Process Execution Language (BPEL) provide a...information is stored in .wsdl and .bpel files for BPEL but in proprietary format for BPMN . 4. DoDAF-based requirement specifications: Department of

  19. Proposed GTA welding specification and acceptance criteria for the MC4163

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kwiatkowski, J.J.

    1991-04-12

    This specification documents the gas tungsten arc (GTA) welding process and production weld acceptance criteria requirements for the MC4163. This document is written specifically to apply to the welds on the MC4163 and is not to be used as a general gas tungsten arc welding specification. All sections of this specification must be complied with unless specifically exempted in writing. There are a total of five welds with three different joint designs required to fabricate the MC4163. In the order of fabrication they are (1) initiator closure disc, (2) nozzle to case girth welds, two and, (3) nozzle closure discmore » welds, two. This specification will only address the nozzle to case girth welds and the nozzle closure disc welds.« less

  20. Lessons Learned in the Specification, Purchase, Validation and Final Installation Process of a Replacement PCM Bit Synchronizer

    NASA Technical Reports Server (NTRS)

    Price, Richard N.

    2007-01-01

    This paper intends to describe the lessons learned while specifying validating and installing a bit sync to replace the 30 year old Aydin Model 335a PCM bit sync used in the Space Shuttle Launch Control Center. The engineer had to analyze the original requirements and specifications and then create new requirements documentation that more correctly described our needs. One issue to consider was the removal of unnecessary requirements such as various data formats when only one format is used. The conversion to a system that no longer has an assortment of analog rotary switches required retraining of the operators. Finally, post-procurement corrections for undisclosed user requirements and missed design requirements required close contact with a manufacturer who was willing to accommodate the changes.

  1. Comparative Ratings of the Utility of Portfolio Requirements: Toward Content Validity.

    ERIC Educational Resources Information Center

    McFarland, Jacqueline; Wisniewski, Shirley; Vermette, Paul

    While the value of portfolio learning and assessment has gained much support from the educational community, many questions arise as specific implementations are attempted. This study examined one aspect, namely, the content validity of specific requirements, and addressed the question "How do various constituencies (methods students, student…

  2. 7 CFR 210.10 - Meal requirements for lunches and requirements for afterschool snacks.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... group served in the school. In addition, school lunches must meet the dietary specifications in... specifications for calories, saturated fat, trans fat, and sodium. Foods of minimal nutritional value and fluid..., green bananas, green peas, green lima beans, plantains, taro, water chestnuts, and white potatoes; and...

  3. 21 CFR 74.2206 - D&C Green No. 6.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... ADDITIVES SUBJECT TO CERTIFICATION Cosmetics § 74.2206 D&C Green No. 6. (a) Identity and specifications. The color additive D&C Green No. 6 shall conform in identity and specifications to the requirements of § 74... applied cosmetics in amounts consistent with good manufacturing practice. (c) Labeling requirements. The...

  4. Information Requirements Specification II: Brainstorming Collective Decision-Making Technique.

    ERIC Educational Resources Information Center

    Telem, Moshe

    1988-01-01

    Information requirements specification (IRS) constitutes an Achilles heel in the system life cycle of management information systems. This article establishes a systematic overall IRS technique applicable to organizations of all types and sizes. The technique's integration of brainstorming and theory Z principles creates an effective, stimulating,…

  5. Hemogenic endothelial cell specification requires c-kit, notch signaling, and p27-mediated cell-cycle control

    USDA-ARS?s Scientific Manuscript database

    Delineating the mechanism or mechanisms that regulate the specification of hemogenic endothelial cells from primordial endothelium is critical for optimizing their derivation from human stem cells for clinical therapies. We previously determined that retinoic acid (RA) is required for hemogenic spec...

  6. 49 CFR 179.103 - Special requirements for class 114A * * * tank car tanks.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Special requirements for class 114A * * * tank car...) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120...

  7. 49 CFR 543.6 - Petition: Specific content requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 6 2010-10-01 2010-10-01 false Petition: Specific content requirements. 543.6...; (4) The reasons for the petitioner's belief that the antitheft device will be effective in reducing... petitioner and form a basis for that belief; (5) The reasons for the petitioner's belief that the agency...

  8. 49 CFR 543.6 - Petition: Specific content requirements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 6 2014-10-01 2014-10-01 false Petition: Specific content requirements. 543.6...; (4) The reasons for the petitioner's belief that the antitheft device will be effective in reducing... petitioner and form a basis for that belief; (5) The reasons for the petitioner's belief that the agency...

  9. 49 CFR 543.6 - Petition: Specific content requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 6 2011-10-01 2011-10-01 false Petition: Specific content requirements. 543.6...; (4) The reasons for the petitioner's belief that the antitheft device will be effective in reducing... petitioner and form a basis for that belief; (5) The reasons for the petitioner's belief that the agency...

  10. 49 CFR 543.6 - Petition: Specific content requirements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 6 2012-10-01 2012-10-01 false Petition: Specific content requirements. 543.6...; (4) The reasons for the petitioner's belief that the antitheft device will be effective in reducing... petitioner and form a basis for that belief; (5) The reasons for the petitioner's belief that the agency...

  11. 49 CFR 543.6 - Petition: Specific content requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 6 2013-10-01 2013-10-01 false Petition: Specific content requirements. 543.6...; (4) The reasons for the petitioner's belief that the antitheft device will be effective in reducing... petitioner and form a basis for that belief; (5) The reasons for the petitioner's belief that the agency...

  12. 25 CFR 900.45 - What specific minimum requirements shall an Indian tribe or tribal organization's financial...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... or tribal organization's financial management system contain to meet these standards? 900.45 Section... ASSISTANCE ACT Standards for Tribal or Tribal Organization Management Systems Standards for Financial Management Systems § 900.45 What specific minimum requirements shall an Indian tribe or tribal organization's...

  13. 49 CFR 179.102 - Special commodity requirements for pressure tank car tanks.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... car tanks. 179.102 Section 179.102 Transportation Other Regulations Relating to Transportation... REGULATIONS SPECIFICATIONS FOR TANK CARS Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120) § 179.102 Special commodity requirements for pressure tank car tanks. (a) In addition to...

  14. 40 CFR 799.10 - Test standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 32 2011-07-01 2011-07-01 false Test standards. 799.10 Section 799.10...) IDENTIFICATION OF SPECIFIC CHEMICAL SUBSTANCE AND MIXTURE TESTING REQUIREMENTS General Provisions § 799.10 Test... requirements of parts 790 and 792 of this chapter unless modified in specific chemical test rules in subpart B...

  15. 40 CFR 799.10 - Test standards.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 32 2014-07-01 2014-07-01 false Test standards. 799.10 Section 799.10...) IDENTIFICATION OF SPECIFIC CHEMICAL SUBSTANCE AND MIXTURE TESTING REQUIREMENTS General Provisions § 799.10 Test... requirements of parts 790 and 792 of this chapter unless modified in specific chemical test rules in subpart B...

  16. 10 CFR 30.33 - General requirements for issuance of specific licenses.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 1 2014-01-01 2014-01-01 false General requirements for issuance of specific licenses. 30.33 Section 30.33 Energy NUCLEAR REGULATORY COMMISSION RULES OF GENERAL APPLICABILITY TO DOMESTIC..., and other benefits against environmental costs and considering available alternatives, that the action...

  17. 10 CFR 30.33 - General requirements for issuance of specific licenses.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 1 2013-01-01 2013-01-01 false General requirements for issuance of specific licenses. 30.33 Section 30.33 Energy NUCLEAR REGULATORY COMMISSION RULES OF GENERAL APPLICABILITY TO DOMESTIC... benefits against environmental costs and considering available alternatives, that the action called for is...

  18. 24 CFR 200.952 - Supplementary specific requirements under the HUD building product standards and certification...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... under the HUD building product standards and certification program for particleboard interior stair... Supplementary specific requirements under the HUD building product standards and certification program for... forth in § 200.935(d)(6) concerning labeling of a product, the administrator's validation mark and the...

  19. 48 CFR 14.202-4 - Bid samples.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... would be appropriate for products that must be suitable from the standpoint of balance, facility of use... required by the formal specifications (Federal, Military, or other) applicable to the acquisition. (d....201-6(o)(2). (2) Where samples required by a Federal, Military, or other formal specification are not...

  20. 18 CFR 11.16 - Filing requirements.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... subject to a headwater benefits determination under this subpart must supply project-specific data, in accordance with this section, by February 1 of each year for data from the preceding calendar year. (2...-specific data, in accordance with this section, for the years specified in the notice. (b) Data required...

  1. 18 CFR 11.16 - Filing requirements.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... subject to a headwater benefits determination under this subpart must supply project-specific data, in accordance with this section, by February 1 of each year for data from the preceding calendar year. (2...-specific data, in accordance with this section, for the years specified in the notice. (b) Data required...

  2. 18 CFR 11.16 - Filing requirements.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... subject to a headwater benefits determination under this subpart must supply project-specific data, in accordance with this section, by February 1 of each year for data from the preceding calendar year. (2...-specific data, in accordance with this section, for the years specified in the notice. (b) Data required...

  3. 10 CFR 34.61 - Records of the specific license for industrial radiography.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 1 2013-01-01 2013-01-01 false Records of the specific license for industrial radiography. 34.61 Section 34.61 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.61...

  4. 10 CFR 34.61 - Records of the specific license for industrial radiography.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 1 2014-01-01 2014-01-01 false Records of the specific license for industrial radiography. 34.61 Section 34.61 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.61...

  5. 10 CFR 34.61 - Records of the specific license for industrial radiography.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 1 2011-01-01 2011-01-01 false Records of the specific license for industrial radiography. 34.61 Section 34.61 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.61...

  6. 10 CFR 34.61 - Records of the specific license for industrial radiography.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 1 2012-01-01 2012-01-01 false Records of the specific license for industrial radiography. 34.61 Section 34.61 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.61...

  7. 10 CFR 34.61 - Records of the specific license for industrial radiography.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Records of the specific license for industrial radiography. 34.61 Section 34.61 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.61...

  8. 9 CFR 72.18 - Movement interstate; specification by the Deputy Administrator, Veterinary Services of treatment...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Movement interstate; specification by the Deputy Administrator, Veterinary Services of treatment required when dipping facilities..., Veterinary Services of treatment required when dipping facilities unavailable. (a) Tick-infested cattle...

  9. 9 CFR 72.18 - Movement interstate; specification by the Deputy Administrator, Veterinary Services of treatment...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Movement interstate; specification by the Deputy Administrator, Veterinary Services of treatment required when dipping facilities..., Veterinary Services of treatment required when dipping facilities unavailable. (a) Tick-infested cattle...

  10. Net-centric ACT-R-Based Cognitive Architecture with DEVS Unified Process

    DTIC Science & Technology

    2011-04-01

    effort has been spent in analyzing various forms of requirement specifications, viz, state-based, Natural Language based, UML-based, Rule- based, BPMN ...requirement specifications in one of the chosen formats such as BPMN , DoDAF, Natural Language Processing (NLP) based, UML- based, DSL or simply

  11. 21 CFR 74.2206 - D&C Green No. 6.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... ADDITIVES SUBJECT TO CERTIFICATION Cosmetics § 74.2206 D&C Green No. 6. (a) Identity and specifications. The color additive D&C Green No. 6 shall conform in identity and specifications to the requirements of § 74... applied cosmetics in amounts consistent with good manufacturing practice. (c) Labeling requirements. The...

  12. 21 CFR 74.2206 - D&C Green No. 6.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... ADDITIVES SUBJECT TO CERTIFICATION Cosmetics § 74.2206 D&C Green No. 6. (a) Identity and specifications. The color additive D&C Green No. 6 shall conform in identity and specifications to the requirements of § 74... applied cosmetics in amounts consistent with good manufacturing practice. (c) Labeling requirements. The...

  13. 21 CFR 74.2206 - D&C Green No. 6.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... ADDITIVES SUBJECT TO CERTIFICATION Cosmetics § 74.2206 D&C Green No. 6. (a) Identity and specifications. The color additive D&C Green No. 6 shall conform in identity and specifications to the requirements of § 74... applied cosmetics in amounts consistent with good manufacturing practice. (c) Labeling requirements. The...

  14. 24 CFR 1003.302 - Project specific threshold requirements.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 4 2012-04-01 2012-04-01 false Project specific threshold requirements. 1003.302 Section 1003.302 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN DEVELOPMENT (CONTINUED) OFFICE OF ASSISTANT SECRETARY FOR PUBLIC AND INDIAN HOUSING, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT COMMUNITY...

  15. 24 CFR 1003.302 - Project specific threshold requirements.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 4 2013-04-01 2013-04-01 false Project specific threshold requirements. 1003.302 Section 1003.302 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN DEVELOPMENT (CONTINUED) OFFICE OF ASSISTANT SECRETARY FOR PUBLIC AND INDIAN HOUSING, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT COMMUNITY...

  16. 24 CFR 1003.302 - Project specific threshold requirements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Project specific threshold requirements. 1003.302 Section 1003.302 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR PUBLIC AND INDIAN HOUSING, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT COMMUNITY...

  17. 24 CFR 1003.302 - Project specific threshold requirements.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false Project specific threshold requirements. 1003.302 Section 1003.302 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN DEVELOPMENT (CONTINUED) OFFICE OF ASSISTANT SECRETARY FOR PUBLIC AND INDIAN HOUSING, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT COMMUNITY...

  18. Quality requirements for reclaimed/recycled water

    NASA Technical Reports Server (NTRS)

    Janik, Daniel S.; Sauer, Richard L.; Pierson, Duane L.; Thorstenson, Yvonne R.

    1987-01-01

    Water used during current and previous space missions has been either carried or made aloft. Future human space endeavors will require some form of water reclamation and recycling. There is little experience in the U.S. space program with this technology. Water reclamation and recycling constitute engineering challenges of the broadest nature that will require an intensive research and development effort if this technology is to mature in time for practical use on the proposed U.S. Space Station. In order for this to happen, reclaimed/recycled water specifications will need to be devised to guide engineering development. Present NASA Potable Water Specifications are not applicable to reclaimed or recycled water. Adequate specifications for ensuring the quality of the reclaimed or recycled potable water system is reviewed, limitations of present water specifications are examined, world experience with potable water reclamation/recycling systems and systems analogs is reviewed, and an approach to developing pertinent biomedical water specifications for spacecraft is presented. Space Station water specifications should be designed to ensure the health of all likely spacecraft inhabitants including man, animals, and plants.

  19. Towards the formal specification of the requirements and design of a processor interface unit

    NASA Technical Reports Server (NTRS)

    Fura, David A.; Windley, Phillip J.; Cohen, Gerald C.

    1993-01-01

    Work to formally specify the requirements and design of a Processor Interface Unit (PIU), a single-chip subsystem providing memory interface, bus interface, and additional support services for a commercial microprocessor within a fault-tolerant computer system, is described. This system, the Fault-Tolerant Embedded Processor (FTEP), is targeted towards applications in avionics and space requiring extremely high levels of mission reliability, extended maintenance free operation, or both. The approaches that were developed for modeling the PIU requirements and for composition of the PIU subcomponents at high levels of abstraction are described. These approaches were used to specify and verify a nontrivial subset of the PIU behavior. The PIU specification in Higher Order Logic (HOL) is documented in a companion NASA contractor report entitled 'Towards the Formal Specification of the Requirements and Design of a Processor Interfacs Unit - HOL Listings.' The subsequent verification approach and HOL listings are documented in NASA contractor report entitled 'Towards the Formal Verification of the Requirements and Design of a Processor Interface Unit' and NASA contractor report entitled 'Towards the Formal Verification of the Requirements and Design of a Processor Interface Unit - HOL Listings.'

  20. Microfluidic differential immunocapture biochip for specific leukocyte counting

    PubMed Central

    Hassan, Umer; Watkins, Nicholas N; Reddy, Bobby; Damhorst, Gregory; Bashir, Rashid

    2016-01-01

    Enumerating specific cell types from whole blood can be very useful for research and diagnostic purposes—e.g., for counting of cD4 and cD8 t cells in HIV/aIDs diagnostics. We have developed a biosensor based on a differential immunocapture technology to enumerate specific cells in 30 min using 10 µl of blood. this paper provides a comprehensive stepwise protocol to replicate our biosensor for cD4 and cD8 cell counts. the biochip can also be adapted to enumerate other specific cell types such as somatic cells or cells from tissue or liquid biopsies. capture of other specific cells requires immobilization of their corresponding antibodies within the capture chamber. therefore, this protocol is useful for research into areas surrounding immunocapture-based biosensor development. the biosensor production requires 24 h, a one-time cell capture optimization takes 6–9 h, and the final cell counting experiment in a laboratory environment requires 30 min to complete. PMID:26963632

  1. Strengthening materials specifications

    NASA Astrophysics Data System (ADS)

    Sampath, K.

    2005-10-01

    Continuing efforts to strengthen materials specifications readily recognize that a mere compliance with a materials specification only assures a material meeting or exceeding the minimum expectations explicitly detailed in the specification. Implicitly, such efforts also recognize that additional and specific client needs must be addressed as supplementary requirements and introduced during material procurement to reduce risks and assure enhanced performance. This article describes two U.S. Navy-related case studies that allowed further strengthening of the materials specification process, using newer methods and renewed understanding. The first case demonstrates the use of a constraints-based modeling approach to specify the chemical composition of high-performance welding electrodes for critical U.S. Navy applications. This approach helps to distinguish high-performance welding electrode chemical compositions from rich and lean welding electrode chemical compositions that might limit the operational envelope, reduce performance, or both, while increasing overall cost of fabrication but otherwise meet electrode specification requirements. The second case identifies that the size of an ingot could be an important factor while specifying the aluminum and sulfur contents of very large-size, heavy-gauge plates. Renewed understanding of melt fluidity issues associated with the solidification of very large-size ingots shows that deficiencies in through-thickness ductility of heavy-gauge plates are related to controlling aluminum and sulfur contents of the voluminous melt, notwithstanding explicit compliance with specification requirements.

  2. Friendly Extensible Transfer Tool Beta Version

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Collins, William P.; Gutierrez, Kenneth M.; McRee, Susan R.

    2016-04-15

    Often data transfer software is designed to meet specific requirements or apply to specific environments. Frequently, this requires source code integration for added functionality. An extensible data transfer framework is needed to more easily incorporate new capabilities, in modular fashion. Using FrETT framework, functionality may be incorporated (in many cases without need of source code) to handle new platform capabilities: I/O methods (e.g., platform specific data access), network transport methods, data processing (e.g., data compression.).

  3. Analytical evaluation of ILM sensors

    NASA Technical Reports Server (NTRS)

    Kirk, R. J.; Johnson, C. E.; Doty, D.

    1975-01-01

    Functional requirements and operating environment constraints for an Independent Landing Monitor for aircraft landings in Cat. 2/3 weather conditions are identified and translated into specific sensing requirements. State-of-the-art capabilities of radar, TV, FLIR, multilateration, microwave radiometry, interferometry, redundant MLS and nuclear sensing concepts are evaluated and compared to the requirements. Concepts showing the best ILM potential are identified elsewhere in this series. Three specific concepts are identified: bistatic radar, complex interferometry, and circular synthetic aperture.

  4. openEHR Based Systems and the General Data Protection Regulation (GDPR).

    PubMed

    Sousa, Mariana; Ferreira, Duarte; Santos-Pereira, Cátia; Bacelar, Gustavo; Frade, Samuel; Pestana, Olívia; Cruz-Correia, Ricardo

    2018-01-01

    The concerns about privacy and personal data protection resulted in reforms of the existing legislation in European Union (EU). The General Data Protection Regulation (GDPR) aims to reform the existing measures on the topic of personal data protection of the European Union citizens, with a strong input on the rights and freedoms of people and in the establishment of rules for the processing of personal data. OpenEHR is a standard that embodies many principles of interoperable and secure software for electronic health records. This work aims to understand to what extent the openEHR standard can be considered a solution for the requirements needed by GDPR. A list of requirements for a Hospital Information Systems (HIS) compliant with GDPR and an identification of openEHR specifications was made. The requirements were categorized and compared with the specifications. The requirements identified for the systems were matched with the openEHR specifications, which result in 16 requirements matched with openEHR. All the specifications identified matched at least one requirement. OpenEHR is a solution for the development of HIS that reinforce privacy and personal data protection, ensuring that they are contemplated in the system development. The institutions can secure that their Eletronic Health Record are compliant with GDPR while safeguarding the medical data quality and, as a result, the healthcare delivery.

  5. 14 CFR 34.81 - Fuel specifications.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... EXHAUST EMISSION REQUIREMENTS FOR TURBINE ENGINE POWERED AIRPLANES Test Procedures for Engine Smoke Emissions (Aircraft Gas Turbine Engines) § 34.81 Fuel specifications. Fuel having specifications as provided...

  6. Automated personnel data base system specifications, Task V. Final report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bartley, H.J.; Bocast, A.K.; Deppner, F.O.

    1978-11-01

    The full title of this study is 'Development of Qualification Requirements, Training Programs, Career Plans, and Methodologies for Effective Management and Training of Inspection and Enforcement Personnel.' Task V required the development of an automated personnel data base system for NRC/IE. This system is identified as the NRC/IE Personnel, Assignment, Qualifications, and Training System (PAQTS). This Task V report provides the documentation for PAQTS including the Functional Requirements Document (FRD), the Data Requirements Document (DRD), the Hardware and Software Capabilities Assessment, and the Detailed Implementation Schedule. Specific recommendations to facilitate implementation of PAQTS are also included.

  7. The High Power Electric Propulsion (HiPEP) Ion Thruster

    NASA Technical Reports Server (NTRS)

    Foster, John E.; Haag, Tom; Patterson, Michael; Williams, George J., Jr.; Sovey, James S.; Carpenter, Christian; Kamhawi, Hani; Malone, Shane; Elliot, Fred

    2004-01-01

    Practical implementation of the proposed Jupiter Icy Moon Orbiter (JIMO) mission, which would require a total delta V of approximately 38 km/s, will require the development of a high power, high specific impulse propulsion system. Initial analyses show that high power gridded ion thrusters could satisfy JIMO mission requirements. A NASA GRC-led team is developing a large area, high specific impulse, nominally 25 kW ion thruster to satisfy both the performance and the lifetime requirements for this proposed mission. The design philosophy and development status as well as a thruster performance assessment are presented.

  8. 7 CFR 58.528 - Microbiological requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Requirements for Cottage Cheese Bearing Usda Official Identification § 58.528 Microbiological requirements. Compliance shall be...

  9. Research on performance requirements of turbofan engine used on carrier-based UAV

    NASA Astrophysics Data System (ADS)

    Zhao, Shufan; Li, Benwei; Zhang, Wenlong; Wu, Heng; Feng, Tang

    2017-05-01

    According to the mission requirements of the carrier-based unmanned aerial vehicle (UAV), a mode level flight was established to calculate the thrust requirements from altitude 9 km to 13 km. Then, the estimation method of flight profile was used to calculate the weight of UAV in each stage to get the specific fuel consumption requirements of the UAV in standby stage. The turbofan engine of carrier-based UAV should meet the thrust and specific fuel consumption requirements. Finally, the GSP software was used to verify the simulation of a small high-bypass turbofan engine. The conclusion is useful for the turbofan engine selection of carrier-based UAV.

  10. Requirements for data integration platforms in biomedical research networks: a reference model.

    PubMed

    Ganzinger, Matthias; Knaup, Petra

    2015-01-01

    Biomedical research networks need to integrate research data among their members and with external partners. To support such data sharing activities, an adequate information technology infrastructure is necessary. To facilitate the establishment of such an infrastructure, we developed a reference model for the requirements. The reference model consists of five reference goals and 15 reference requirements. Using the Unified Modeling Language, the goals and requirements are set into relation to each other. In addition, all goals and requirements are described textually in tables. This reference model can be used by research networks as a basis for a resource efficient acquisition of their project specific requirements. Furthermore, a concrete instance of the reference model is described for a research network on liver cancer. The reference model is transferred into a requirements model of the specific network. Based on this concrete requirements model, a service-oriented information technology architecture is derived and also described in this paper.

  11. 10 CFR 40.32 - General requirements for issuance of specific licenses.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false General requirements for issuance of specific licenses. 40.32 Section 40.32 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF SOURCE MATERIAL License... applicant is qualified by reason of training and experience to use the source material for the purpose...

  12. 21 CFR 111.560 - What requirements apply to the review and investigation of a product complaint?

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... PRACTICE IN MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS Product... a possible failure of a dietary supplement to meet any of its specifications, or any other... failure of a dietary supplement to meet any of its specifications, or any other requirements of this part...

  13. 21 CFR 111.560 - What requirements apply to the review and investigation of a product complaint?

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... PRACTICE IN MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS Product... a possible failure of a dietary supplement to meet any of its specifications, or any other... failure of a dietary supplement to meet any of its specifications, or any other requirements of this part...

  14. E-Textbooks and Connectivity: Proposing an Analytical Framework

    ERIC Educational Resources Information Center

    Gueudet, Ghislaine; Pepin, Birgit; Restrepo, Angela; Sabra, Hussein; Trouche, Luc

    2018-01-01

    This paper is concerned with the development of e-textbooks. We claim that analysis (and design) of e-textbooks requires the development of a specific frame. Digital affordances provide particular opportunities (e.g. in terms of interactions between users) that require specific considerations for their analysis, as teachers and students use them…

  15. Installation and Assembly, Electrical Ground Support Equipment (GSE), Specification for

    NASA Technical Reports Server (NTRS)

    Denson, Erik C.

    2014-01-01

    This specification covers the general workmanship requirements and procedures for the complete installation and assembly of electrical ground support equipment (EGSE) such as terminal distributors, junction boxes, conduit and fittings, cable trays and accessories, interconnecting cables (including routing requirements), motor-control equipment, and necessary hardware as specified by the applicable contract and drawings.

  16. 40 CFR 53.51 - Demonstration of compliance with design specifications and manufacturing and test requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... compliance with design specifications and manufacturing and test requirements. (a) Overview. (1) Paragraphs... document its post-manufacturing test procedures. As a minimum, each test shall consist of the following... 40 Protection of Environment 5 2011-07-01 2011-07-01 false Demonstration of compliance with design...

  17. 40 CFR 53.51 - Demonstration of compliance with design specifications and manufacturing and test requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... compliance with design specifications and manufacturing and test requirements. (a) Overview. (1) Paragraphs... document its post-manufacturing test procedures. As a minimum, each test shall consist of the following... 40 Protection of Environment 6 2014-07-01 2014-07-01 false Demonstration of compliance with design...

  18. 40 CFR 53.51 - Demonstration of compliance with design specifications and manufacturing and test requirements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... compliance with design specifications and manufacturing and test requirements. (a) Overview. (1) Paragraphs... document its post-manufacturing test procedures. As a minimum, each test shall consist of the following... 40 Protection of Environment 6 2013-07-01 2013-07-01 false Demonstration of compliance with design...

  19. 40 CFR 53.51 - Demonstration of compliance with design specifications and manufacturing and test requirements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... compliance with design specifications and manufacturing and test requirements. (a) Overview. (1) Paragraphs... document its post-manufacturing test procedures. As a minimum, each test shall consist of the following... 40 Protection of Environment 6 2012-07-01 2012-07-01 false Demonstration of compliance with design...

  20. 49 CFR 179.102 - Special commodity requirements for pressure tank car tanks.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... car tanks. 179.102 Section 179.102 Transportation Other Regulations Relating to Transportation...) SPECIFICATIONS FOR TANK CARS Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120) § 179.102 Special commodity requirements for pressure tank car tanks. (a) In addition to §§ 179.100 and...

  1. 49 CFR 179.102 - Special commodity requirements for pressure tank car tanks.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... car tanks. 179.102 Section 179.102 Transportation Other Regulations Relating to Transportation...) SPECIFICATIONS FOR TANK CARS Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120) § 179.102 Special commodity requirements for pressure tank car tanks. (a) In addition to §§ 179.100 and...

  2. 49 CFR 179.102 - Special commodity requirements for pressure tank car tanks.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... car tanks. 179.102 Section 179.102 Transportation Other Regulations Relating to Transportation...) SPECIFICATIONS FOR TANK CARS Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120) § 179.102 Special commodity requirements for pressure tank car tanks. (a) In addition to §§ 179.100 and...

  3. 21 CFR 111.560 - What requirements apply to the review and investigation of a product complaint?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... PRACTICE IN MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS Product... a possible failure of a dietary supplement to meet any of its specifications, or any other... failure of a dietary supplement to meet any of its specifications, or any other requirements of this part...

  4. 24 CFR 200.943 - Supplementary specific requirements under the HUD building product standards and certification...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... under the HUD building product standards and certification program for the grademarking of lumber. 200... Supplementary specific requirements under the HUD building product standards and certification program for the... that the lumber was green or dry at the time of dressing; (7) Indication that the lumber was finger...

  5. User's Manual for the Basic Math Mastery Tests.

    ERIC Educational Resources Information Center

    Weiss, David J.; Trombley, Robert J.

    This user manual introduces and explains the Basic Math Mastery Tests (BMMT), a collection of 10 tests of specific mathematics skills. The tests were designed to assess mastery of specific skills required for successful performance in vocational education or in occupations requiring mathematics skills. All 10 tests are administered and scored by…

  6. 30 CFR 22.7 - Specific requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... APPROVAL OF MINING PRODUCTS PORTABLE METHANE DETECTORS § 22.7 Specific requirements. (a) Design. In the... shall be of such design that it will not produce sparks that will ignite an explosive mixture of methane and air. (5) Detectors of the flame type. Methane detectors of the flame type shall be subject to the...

  7. Rotor systems research aircraft predesign study. Volume 4: Preliminary draft detail specification

    NASA Technical Reports Server (NTRS)

    Miller, A. N.; Linden, A. W.

    1972-01-01

    The RSRA requirements are presented in a detail specification format. Coverage of the requirements includes the following headings: (1) aircraft characteristics, (2) general features of design and construction, (3) aerodynamics, (4) structural design criteria, (5) flight control system, (6) propulsion subsystem, and (7) secondary power and distribution subsystem.

  8. Alternative Fuels Data Center: E85 Flex Fuel Specification

    Science.gov Websites

    Flexible-Fuel Automotive Spark-Ignition Engines. Fuel retailers or fleets purchasing E85 should require , there is no concern with carrying over winter fuel into the summer months because flexible-fuel vehicles requirements. D5798-15 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark

  9. 10 CFR 32.22 - Self-luminous products containing tritium, krypton-85 or promethium-147: Requirements for license...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... promethium-147: Requirements for license to manufacture, process, produce, or initially transfer. 32.22 Section 32.22 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER..., or initially transfer. (a) An application for a specific license to manufacture, process, or produce...

  10. 40 CFR 63.1506 - Operating requirements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... equipment according to the requirements in this section. (2) The owner or operator of an existing sweat furnace that meets the specifications of § 63.1505(f)(1) must operate the sweat furnace and control.... (3) The owner or operator of a new sweat furnace that meets the specifications of § 63.1505(f)(1...

  11. 40 CFR 63.1506 - Operating requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... equipment according to the requirements in this section. (2) The owner or operator of an existing sweat furnace that meets the specifications of § 63.1505(f)(1) must operate the sweat furnace and control.... (3) The owner or operator of a new sweat furnace that meets the specifications of § 63.1505(f)(1...

  12. 40 CFR 63.1506 - Operating requirements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... an existing sweat furnace that meets the specifications of § 63.1505(f)(1) must operate the sweat... date of this standard. (3) The owner or operator of a new sweat furnace that meets the specifications of § 63.1505(f)(1) must operate the sweat furnace and control equipment according to the requirements...

  13. 40 CFR 63.1506 - Operating requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... an existing sweat furnace that meets the specifications of § 63.1505(f)(1) must operate the sweat... date of this standard. (3) The owner or operator of a new sweat furnace that meets the specifications of § 63.1505(f)(1) must operate the sweat furnace and control equipment according to the requirements...

  14. 40 CFR 270.25 - Specific part B information requirements for equipment.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... characteristics and control device operation parameters as specified in § 264.1035(b)(4)(iii). (4) A statement... Permit Application § 270.25 Specific part B information requirements for equipment. Except as otherwise... implementation schedule as specified in § 264.1033(a)(2). (c) Where an owner or operator applies for permission...

  15. 40 CFR 270.25 - Specific part B information requirements for equipment.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... characteristics and control device operation parameters as specified in § 264.1035(b)(4)(iii). (4) A statement... Permit Application § 270.25 Specific part B information requirements for equipment. Except as otherwise... implementation schedule as specified in § 264.1033(a)(2). (c) Where an owner or operator applies for permission...

  16. 40 CFR 270.25 - Specific part B information requirements for equipment.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... characteristics and control device operation parameters as specified in § 264.1035(b)(4)(iii). (4) A statement... Permit Application § 270.25 Specific part B information requirements for equipment. Except as otherwise... implementation schedule as specified in § 264.1033(a)(2). (c) Where an owner or operator applies for permission...

  17. 7 CFR 319.37-6 - Specific treatment and other requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., Roots, Bulbs, Seeds, and Other Plant Products 1,2 § 319.37-6 Specific treatment and other requirements. (a) The following seeds and bulbs may be imported into the United States from designated countries... this chapter. Seeds and bulbs treated prior to importation outside the United States must be treated in...

  18. 7 CFR 319.37-6 - Specific treatment and other requirements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ..., Roots, Bulbs, Seeds, and Other Plant Products 1,2 § 319.37-6 Specific treatment and other requirements. (a) The following seeds and bulbs may be imported into the United States from designated countries... this chapter. Seeds and bulbs treated prior to importation outside the United States must be treated in...

  19. 33 CFR 154.1240 - Specific requirements for animal fats and vegetable oils facilities that could reasonably be...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... fats and vegetable oils facilities that could reasonably be expected to cause substantial harm to the... SECURITY (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Animal Fats and Vegetable Oils Facilities § 154.1240 Specific requirements for animal fats and vegetable...

  20. Onboard experiment data support facility, task 1 report. [space shuttles

    NASA Technical Reports Server (NTRS)

    1975-01-01

    The conceptual design and specifications are developed for an onboard experiment data support facility (OEDSF) to provide end to end processing of data from various payloads on board space shuttles. Classical data processing requirements are defined and modeled. Onboard processing requirements are analyzed. Specifications are included for an onboard processor.

  1. 46 CFR 160.048-3 - Materials.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... fabrics shall comply with the requirements of Federal Specification CCC-C-426 for Type I, Class 3 material... not less than 0.008 inch in thickness meeting the requirements of Federal Specification L-P-375 for Type I or II, Class 1, film. (f) Grab straps. The grab straps shall be of materials permitted for the...

  2. ERK Signaling in the Pituitary Is Required for Female But Not Male Fertility

    PubMed Central

    Bliss, Stuart P.; Miller, Andrew; Navratil, Amy M.; Xie, JianJun; McDonough, Sean P.; Fisher, Patricia J.; Landreth, Gary E.; Roberson, Mark S.

    2009-01-01

    Males and females require different patterns of pituitary gonadotropin secretion for fertility. The mechanisms underlying these gender-specific profiles of pituitary hormone production are unknown; however, they are fundamental to understanding the sexually dimorphic control of reproductive function at the molecular level. Several studies suggest that ERK1 and -2 are essential modulators of hypothalamic GnRH-mediated regulation of pituitary gonadotropin production and fertility. To test this hypothesis, we generated mice with a pituitary-specific depletion of ERK1 and 2 and examined a range of physiological parameters including fertility. We find that ERK signaling is required in females for ovulation and fertility, whereas male reproductive function is unaffected by this signaling deficiency. The effects of ERK pathway ablation on LH biosynthesis underlie this gender-specific phenotype, and the molecular mechanism involves a requirement for ERK-dependent up-regulation of the transcription factor Egr1, which is necessary for LHβ expression. Together, these findings represent a significant advance in elucidating the molecular basis of gender-specific regulation of the hypothalamic-pituitary-gonadal axis and sexually dimorphic control of fertility. PMID:19372235

  3. 7 CFR 58.530 - Keeping quality requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Requirements for Cottage Cheese Bearing Usda Official Identification § 58.530 Keeping quality requirements. Keeping quality...

  4. Detection of pathogenic organisms in food, water, and body fluids

    NASA Astrophysics Data System (ADS)

    Wallace, William H.; Henley, Michael V.; Sayler, Gary S.

    2002-06-01

    The construction of specific bioluminescent bacteriophage for detection of pathogenic organism can be developed to overcome interferences in complex matrices such as food, water and body fluids. Detection and identification of bacteria often require several days and frequently weeks by standard methods of isolation, growth and biochemical test. Immunoassay detection often requires the expression of the bacterial toxin, which can lead to non-detection of cells that may express the toxin under conditions different from testing protocols. Immunoassays require production of a specific antibody to the agent for detection and interference by contaminants frequently affects results. PCR based detection may be inhibited by substances in complex matrices. Modified methods of the PCR technique, such as magnetic capture-hybridization PCR (MCH-PCR), appear to improve the technique by removing the DNA products away from the inhibitors. However, the techniques required for PCR-based detection are slow and the procedures require skilled personnel working with labile reagents. Our approach is based on transferring bioluminescence (lux) genes into a selected bacteriophage. Bacteriophages are bacterial viruses that are widespread in nature and often are genus and species specific. This specificity eliminates or reduces false positives in a bacteriophage assay. The phage recognizes a specific receptor molecule on the surface of a susceptible bacterium, attaches and then injects the viral nucleic acid into the cell. The injected viral genome is expressed and then replicated, generating numerous exact copies of the viral genetic material including the lux genes, often resulting in an increase in bioluminescence by several hundred fold.

  5. GATOR: Requirements capturing of telephony features

    NASA Technical Reports Server (NTRS)

    Dankel, Douglas D., II; Walker, Wayne; Schmalz, Mark

    1992-01-01

    We are developing a natural language-based, requirements gathering system called GATOR (for the GATherer Of Requirements). GATOR assists in the development of more accurate and complete specifications of new telephony features. GATOR interacts with a feature designer who describes a new feature, set of features, or capability to be implemented. The system aids this individual in the specification process by asking for clarifications when potential ambiguities are present, by identifying potential conflicts with other existing features, and by presenting its understanding of the feature to the designer. Through user interaction with a model of the existing telephony feature set, GATOR constructs a formal representation of the new, 'to be implemented' feature. Ultimately GATOR will produce a requirements document and will maintain an internal representation of this feature to aid in future design and specification. This paper consists of three sections that describe (1) the structure of GATOR, (2) POND, GATOR's internal knowledge representation language, and (3) current research issues.

  6. Development Specification for the Feedwater Supply Assembly (FSA), FSA-431 with Integrated Auxiliary Feedwater Supply Assembly (AFSA), FSA-531

    NASA Technical Reports Server (NTRS)

    Anchondo, Ian; Campbell, Colin

    2017-01-01

    The FSA with Integrated Aux FSA Specification establishes the requirements for design, performance, and testing of the FSA-431/FSA-531 assembly in compliance with CTSD-ADV-780, Development Specification for the Advanced EMU (AEMU) Portable Life Support System (PLSS). This section contains the technical design and performance requirements for the integrated assembly of the Feedwater Supply Assembly and Auxiliary Feedwater Supply Assembly for the Advanced EVA Development Portable Life Support Subsystem (PLSS).

  7. Advanced information processing system: Input/output network management software

    NASA Technical Reports Server (NTRS)

    Nagle, Gail; Alger, Linda; Kemp, Alexander

    1988-01-01

    The purpose of this document is to provide the software requirements and specifications for the Input/Output Network Management Services for the Advanced Information Processing System. This introduction and overview section is provided to briefly outline the overall architecture and software requirements of the AIPS system before discussing the details of the design requirements and specifications of the AIPS I/O Network Management software. A brief overview of the AIPS architecture followed by a more detailed description of the network architecture.

  8. An iterative requirements specification procedure for decision support systems.

    PubMed

    Brookes, C H

    1987-08-01

    Requirements specification is a key element in a DSS development project because it not only determines what is to be done, it also drives the evolution process. A procedure for requirements elicitation is described that is based on the decomposition of the DSS design task into a number of functions, subfunctions, and operators. It is postulated that the procedure facilitates the building of a DSS that is complete and integrates MIS, modelling and expert system components. Some examples given are drawn from the health administration field.

  9. Authoring and verification of clinical guidelines: a model driven approach.

    PubMed

    Pérez, Beatriz; Porres, Ivan

    2010-08-01

    The goal of this research is to provide a framework to enable authoring and verification of clinical guidelines. The framework is part of a larger research project aimed at improving the representation, quality and application of clinical guidelines in daily clinical practice. The verification process of a guideline is based on (1) model checking techniques to verify guidelines against semantic errors and inconsistencies in their definition, (2) combined with Model Driven Development (MDD) techniques, which enable us to automatically process manually created guideline specifications and temporal-logic statements to be checked and verified regarding these specifications, making the verification process faster and cost-effective. Particularly, we use UML statecharts to represent the dynamics of guidelines and, based on this manually defined guideline specifications, we use a MDD-based tool chain to automatically process them to generate the input model of a model checker. The model checker takes the resulted model together with the specific guideline requirements, and verifies whether the guideline fulfils such properties. The overall framework has been implemented as an Eclipse plug-in named GBDSSGenerator which, particularly, starting from the UML statechart representing a guideline, allows the verification of the guideline against specific requirements. Additionally, we have established a pattern-based approach for defining commonly occurring types of requirements in guidelines. We have successfully validated our overall approach by verifying properties in different clinical guidelines resulting in the detection of some inconsistencies in their definition. The proposed framework allows (1) the authoring and (2) the verification of clinical guidelines against specific requirements defined based on a set of property specification patterns, enabling non-experts to easily write formal specifications and thus easing the verification process. Copyright 2010 Elsevier Inc. All rights reserved.

  10. The RNA Export Factor, Nxt1, Is Required for Tissue Specific Transcriptional Regulation

    PubMed Central

    Jiang, Jianqiao; White-Cooper, Helen

    2013-01-01

    The highly conserved, Nxf/Nxt (TAP/p15) RNA nuclear export pathway is important for export of most mRNAs from the nucleus, by interacting with mRNAs and promoting their passage through nuclear pores. Nxt1 is essential for viability; using a partial loss of function allele, we reveal a role for this gene in tissue specific transcription. We show that many Drosophila melanogaster testis-specific mRNAs require Nxt1 for their accumulation. The transcripts that require Nxt1 also depend on a testis-specific transcription complex, tMAC. We show that loss of Nxt1 leads to reduced transcription of tMAC targets. A reporter transcript from a tMAC-dependent promoter is under-expressed in Nxt1 mutants, however the same transcript accumulates in mutants if driven by a tMAC-independent promoter. Thus, in Drosophila primary spermatocytes, the transcription factor used to activate expression of a transcript, rather than the RNA sequence itself or the core transcription machinery, determines whether this expression requires Nxt1. We additionally find that transcripts from intron-less genes are more sensitive to loss of Nxt1 function than those from intron-containing genes and propose a mechanism in which transcript processing feeds back to increase activity of a tissue specific transcription complex. PMID:23754955

  11. Aerobic conditioning for team sport athletes.

    PubMed

    Stone, Nicholas M; Kilding, Andrew E

    2009-01-01

    Team sport athletes require a high level of aerobic fitness in order to generate and maintain power output during repeated high-intensity efforts and to recover. Research to date suggests that these components can be increased by regularly performing aerobic conditioning. Traditional aerobic conditioning, with minimal changes of direction and no skill component, has been demonstrated to effectively increase aerobic function within a 4- to 10-week period in team sport players. More importantly, traditional aerobic conditioning methods have been shown to increase team sport performance substantially. Many team sports require the upkeep of both aerobic fitness and sport-specific skills during a lengthy competitive season. Classic team sport trainings have been shown to evoke marginal increases/decreases in aerobic fitness. In recent years, aerobic conditioning methods have been designed to allow adequate intensities to be achieved to induce improvements in aerobic fitness whilst incorporating movement-specific and skill-specific tasks, e.g. small-sided games and dribbling circuits. Such 'sport-specific' conditioning methods have been demonstrated to promote increases in aerobic fitness, though careful consideration of player skill levels, current fitness, player numbers, field dimensions, game rules and availability of player encouragement is required. Whilst different conditioning methods appear equivalent in their ability to improve fitness, whether sport-specific conditioning is superior to other methods at improving actual game performance statistics requires further research.

  12. NASA specification for manufacturing and performance requirements of NASA standard aerospace nickel-cadmium cells

    NASA Technical Reports Server (NTRS)

    1988-01-01

    On November 25, 1985, the NASA Chief Engineer established a NASA-wide policy to maintain and to require the use of the NASA standard for aerospace nickel-cadmium cells and batteries. The Associate Administrator for Safety, Reliability, Maintainability, and Quality Assurance stated on December 29, 1986, the intent to retain the NASA standard cell usage policy established by the Office of the Chief Engineer. The current NASA policy is also to incorporate technological advances as they are tested and proven for spaceflight applications. This policy will be implemented by modifying the existing standard cells or by developing new NASA standards and their specifications in accordance with the NASA's Aerospace Battery Systems Program Plan. This NASA Specification for Manufacturing and Performance Requirements of NASA Standard Aerospace Nickel-Cadmium Cells is prepared to provide requirements for the NASA standard nickel-cadmium cell. It is an interim specification pending resolution of the separator material availability. This specification has evolved from over 15 years of nickel-cadmium cell experience by NASA. Consequently, considerable experience has been collected and cell performance has been well characterized from many years of ground testing and from in-flight operations in both geosynchronous (GEO) and low earth orbit (LEO) applications. NASA has developed and successfully used two standard flight qualified cell designs.

  13. The Association of State Law to Physical Education Time Allocation in US Public Schools

    PubMed Central

    Oh, April; Chriqui, Jamie F.; Mâsse, Louise C.; Atienza, Audie A.; Nebeling, Linda; Agurs-Collins, Tanya; Moser, Richard P.; Dodd, Kevin W.

    2012-01-01

    Objectives. We examined whether public schools in states with specific and stringent physical education (PE) laws, as assessed by the Physical Education–Related State Policy Classification System (PERSPCS), available on the Classification of Laws Associated with School Students (C.L.A.S.S.) Web site, reported more weekly PE time in the most recent School Health Policies and Programs Survey (SHPPS). Methods. Schools (n = 410) were grouped by their state’s PERSPCS time requirement scores (none, nonspecific requirement, or specific requirement). Average weekly school-level PE was calculated using the SHPPS-reported PE minutes. Weighted analyses determined if PE minutes/week differed by PERSPCS group. Results. Schools in states with specific requirement laws averaged over 27 and 60 more PE minutes/week at the elementary and middle school levels, respectively, compared with schools within states with nonspecific laws and over 40 and 60 more PE minutes per week, respectively, compared with elementary and middle schools in states with no laws. High school results were nonsignificant. Conclusions. Public health guidelines recommend at least 60 minutes of daily physical activity for children, and PE may further this goal. Strong codified law with specific time requirements for PE may be an important tool contributing toward adequate PE time and daily physical activity recommendations. PMID:22594746

  14. Specification for procurement of water-level sensing instrumentation, specification number HIF-I-1

    USGS Publications Warehouse

    Rapp, D.H.

    1982-01-01

    This specification is to communicate to instrument manufacturers the U.S. Geological Survey 's requirements. It covers systems for sensing the elevation of the water surface on open channels, rivers, lakes, reservoirs, storm-sewer pipes, and observation wells at Survey data-collection sites. The signal output (mechanical or electrical) must meet the signal input requirements of analog to digital and digital input recorders in use by the Survey. A classification of stage-sensing systems by common characteristics is used to aid Survey people making system selections. These characteristics are (1) system type (contact or noncontact), (2) sensor type and sensing distance, (3) accuracy, (4) range, (5) power requirements, (6) system size and weight, and (7) data output signal. Acceptable system requirements cover system configurations, signal outputs, materials, operation manuals, detailed environmental conditions, calibration procedures, system accuracy, power requirements, installation limitations, maintainability, safety, and workmanship. An outline of the qualification test procedures and failure criteria are also given. The Hydrologic Instrumentation Facility at NSTL Station, Mississippi will test available systems to determine if they meet the specification in this report for inclusion in the Survey 's 'Qualified Products List'. This list will be used for future procurement of water-level sensing systems by the Survey. (USGS)

  15. Performance of Thirteen Clinical Rules to Distinguish Bacterial and Presumed Viral Meningitis in Vietnamese Children

    PubMed Central

    Huy, Nguyen Tien; Thao, Nguyen Thanh Hong; Tuan, Nguyen Anh; Khiem, Nguyen Tuan; Moore, Christopher C.; Thi Ngoc Diep, Doan; Hirayama, Kenji

    2012-01-01

    Background and Purpose Successful outcomes from bacterial meningitis require rapid antibiotic treatment; however, unnecessary treatment of viral meningitis may lead to increased toxicities and expense. Thus, improved diagnostics are required to maximize treatment and minimize side effects and cost. Thirteen clinical decision rules have been reported to identify bacterial from viral meningitis. However, few rules have been tested and compared in a single study, while several rules are yet to be tested by independent researchers or in pediatric populations. Thus, simultaneous test and comparison of these rules are required to enable clinicians to select an optimal diagnostic rule for bacterial meningitis in settings and populations similar to ours. Methods A retrospective cross-sectional study was conducted at the Infectious Department of Pediatric Hospital Number 1, Ho Chi Minh City, Vietnam. The performance of the clinical rules was evaluated by area under a receiver operating characteristic curve (ROC-AUC) using the method of DeLong and McNemar test for specificity comparison. Results Our study included 129 patients, of whom 80 had bacterial meningitis and 49 had presumed viral meningitis. Spanos's rule had the highest AUC at 0.938 but was not significantly greater than other rules. No rule provided 100% sensitivity with a specificity higher than 50%. Based on our calculation of theoretical sensitivity and specificity, we suggest that a perfect rule requires at least four independent variables that posses both sensitivity and specificity higher than 85–90%. Conclusions No clinical decision rules provided an acceptable specificity (>50%) with 100% sensitivity when applying our data set in children. More studies in Vietnam and developing countries are required to develop and/or validate clinical rules and more very good biomarkers are required to develop such a perfect rule. PMID:23209715

  16. Performance of thirteen clinical rules to distinguish bacterial and presumed viral meningitis in Vietnamese children.

    PubMed

    Huy, Nguyen Tien; Thao, Nguyen Thanh Hong; Tuan, Nguyen Anh; Khiem, Nguyen Tuan; Moore, Christopher C; Thi Ngoc Diep, Doan; Hirayama, Kenji

    2012-01-01

    Successful outcomes from bacterial meningitis require rapid antibiotic treatment; however, unnecessary treatment of viral meningitis may lead to increased toxicities and expense. Thus, improved diagnostics are required to maximize treatment and minimize side effects and cost. Thirteen clinical decision rules have been reported to identify bacterial from viral meningitis. However, few rules have been tested and compared in a single study, while several rules are yet to be tested by independent researchers or in pediatric populations. Thus, simultaneous test and comparison of these rules are required to enable clinicians to select an optimal diagnostic rule for bacterial meningitis in settings and populations similar to ours. A retrospective cross-sectional study was conducted at the Infectious Department of Pediatric Hospital Number 1, Ho Chi Minh City, Vietnam. The performance of the clinical rules was evaluated by area under a receiver operating characteristic curve (ROC-AUC) using the method of DeLong and McNemar test for specificity comparison. Our study included 129 patients, of whom 80 had bacterial meningitis and 49 had presumed viral meningitis. Spanos's rule had the highest AUC at 0.938 but was not significantly greater than other rules. No rule provided 100% sensitivity with a specificity higher than 50%. Based on our calculation of theoretical sensitivity and specificity, we suggest that a perfect rule requires at least four independent variables that posses both sensitivity and specificity higher than 85-90%. No clinical decision rules provided an acceptable specificity (>50%) with 100% sensitivity when applying our data set in children. More studies in Vietnam and developing countries are required to develop and/or validate clinical rules and more very good biomarkers are required to develop such a perfect rule.

  17. 40 CFR 600.010-08 - Vehicle test requirements and minimum data requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... data requirements. 600.010-08 Section 600.010-08 Protection of Environment ENVIRONMENTAL PROTECTION... requirements and minimum data requirements. (a) Unless otherwise exempted from specific emission compliance... applicable): (1) The manufacturer shall generate FTP fuel economy data by testing according to the applicable...

  18. 7 CFR 3550.57 - Dwelling requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... amount required to address the specific need. (b) New dwellings. Construction must meet the requirements..., heating, plumbing, water, and wastewater disposal systems; and be free of termites and other wood damaging...

  19. 7 CFR 58.650 - Requirements for frozen custard.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Requirements for Finished Products Bearing Usda Official Identification § 58.650 Requirements for frozen custard. The same...

  20. Neuron-specific feeding RNAi in C. elegans and its use in a screen for essential genes required for GABA neuron function.

    PubMed

    Firnhaber, Christopher; Hammarlund, Marc

    2013-11-01

    Forward genetic screens are important tools for exploring the genetic requirements for neuronal function. However, conventional forward screens often have difficulty identifying genes whose relevant functions are masked by pleiotropy. In particular, if loss of gene function results in sterility, lethality, or other severe pleiotropy, neuronal-specific functions cannot be readily analyzed. Here we describe a method in C. elegans for generating cell-specific knockdown in neurons using feeding RNAi and its application in a screen for the role of essential genes in GABAergic neurons. We combine manipulations that increase the sensitivity of select neurons to RNAi with manipulations that block RNAi in other cells. We produce animal strains in which feeding RNAi results in restricted gene knockdown in either GABA-, acetylcholine-, dopamine-, or glutamate-releasing neurons. In these strains, we observe neuron cell-type specific behavioral changes when we knock down genes required for these neurons to function, including genes encoding the basal neurotransmission machinery. These reagents enable high-throughput, cell-specific knockdown in the nervous system, facilitating rapid dissection of the site of gene action and screening for neuronal functions of essential genes. Using the GABA-specific RNAi strain, we screened 1,320 RNAi clones targeting essential genes on chromosomes I, II, and III for their effect on GABA neuron function. We identified 48 genes whose GABA cell-specific knockdown resulted in reduced GABA motor output. This screen extends our understanding of the genetic requirements for continued neuronal function in a mature organism.

  1. 49 CFR 179.221-1 - Individual specification requirements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW and 115AW) § 179.221-1...

  2. 49 CFR 179.201-1 - Individual specification requirements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW and 115AW) § 179.201-1...

  3. 49 CFR 179.201-1 - Individual specification requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW and 115AW) § 179.201-1...

  4. 49 CFR 179.201-1 - Individual specification requirements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW and 115AW) § 179.201-1...

  5. 49 CFR 179.221-1 - Individual specification requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW and 115AW) § 179.221-1...

  6. Dry Creek Joint Elementary School District. Educational Specifications: Dry Creek Middle School.

    ERIC Educational Resources Information Center

    Dry Creek Joint Elementary School District, Roseville, CA.

    An Educational Specification Committee was convened to determine the design specifications required for a new middle school in Roseville, California's Dry Creek District. This report presents revisions to an earlier document that examined school room specifications for each grade level and administrative area. Specification considerations are…

  7. 40 CFR 86.1206-96 - Equipment required; overview.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-Fueled and Methanol-Fueled Heavy-Duty Vehicles § 86.1206-96 Equipment required; overview. This subpart... methanol-fueled heavy-duty vehicles. Equipment required and specifications are as follows: (a) Evaporative...

  8. 40 CFR 86.1206-96 - Equipment required; overview.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-Fueled and Methanol-Fueled Heavy-Duty Vehicles § 86.1206-96 Equipment required; overview. This subpart... methanol-fueled heavy-duty vehicles. Equipment required and specifications are as follows: (a) Evaporative...

  9. 15 CFR 30.2 - General requirements for filing Electronic Export Information (EEI).

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... definitions, specifications, and requirements of the regulations in this part for all export shipments, except... 15 Commerce and Foreign Trade 1 2014-01-01 2014-01-01 false General requirements for filing... Requirements § 30.2 General requirements for filing Electronic Export Information (EEI). (a) Filing...

  10. 40 CFR 63.11468 - What are the monitoring requirements for new and existing sources?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... baghouse, including but not limited to air leaks, torn or broken bags or filter media, or any other... identified in the site-specific monitoring plan required by paragraph (c)(2) of this section. (vii) You must... submit to the Administrator or delegated authority for approval a site-specific monitoring plan for each...

  11. Control of Materials Flammability Hazards

    NASA Technical Reports Server (NTRS)

    Griffin, Dennis E.

    2003-01-01

    This viewgraph presentation provides information on selecting, using, and configuring spacecraft materials in such a way as to minimize the ability of fire to spread onboard a spacecraft. The presentation gives an overview of the flammability requirements of NASA-STD-6001, listing specific tests and evaluation criteria it requires. The presentation then gives flammability reduction methods for specific spacecraft items and materials.

  12. A Place for Individual Enquiry? Why We Would Miss Controlled Assessments in History

    ERIC Educational Resources Information Center

    Fowle, Mark; Egelnick, Ben

    2013-01-01

    Most history teachers will, at some point, recognise the tension between teaching an engaging history course while at the same time meeting the requirements of an exam specification. Mark Fowle and Ben Egelnick reflect here on how they approached teaching a formal requirement of an exam specification. Rather than see "controlled…

  13. 10 CFR 33.15 - Requirements for the issuance of a Type C specific license of broad scope.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... OF BROAD SCOPE FOR BYPRODUCT MATERIAL Specific Licenses of Broad Scope § 33.15 Requirements for the... this chapter; and (b) The applicant submits a statement that byproduct material will be used only by... bachelor level, or equivalent training and experience, in the physical or biological sciences or in...

  14. Survey of existing performance requirements in codes and standards for light-frame construction

    Treesearch

    G. E. Sherwood

    1980-01-01

    Present building codes and standards are a combination of specifications and performance criteria. Where specifications prevail, the introduction f new materials or methods can be a long, cumbersome process. To facilitate the introduction of new technology, performance requirements are becoming more prevalent. In some areas, there is a lack of information on which to...

  15. Causality and Causal Inference in Social Work: Quantitative and Qualitative Perspectives

    ERIC Educational Resources Information Center

    Palinkas, Lawrence A.

    2014-01-01

    Achieving the goals of social work requires matching a specific solution to a specific problem. Understanding why the problem exists and why the solution should work requires a consideration of cause and effect. However, it is unclear whether it is desirable for social workers to identify cause and effect, whether it is possible for social workers…

  16. 40 CFR Table 5 to Subpart Llll of... - Summary of Reporting Requirements for New Sewage Sludge Incineration Units a

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    .... Documentation for siting requirements. 4. Anticipated date of initial startup. § 60.4915(a). Notification of initial startup Prior to initial startup 1. Maximum design dry sewage sludge burning capacity2.... 4. Anticipated date of initial startup. 5. Site-specific monitoring plan. 6. The site-specific...

  17. 40 CFR Table 5 to Subpart Llll of... - Summary of Reporting Requirements for New Sewage Sludge Incineration Units a

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    .... Documentation for siting requirements. 4. Anticipated date of initial startup. § 60.4915(a). Notification of initial startup Prior to initial startup 1. Maximum design dry sewage sludge burning capacity2.... 4. Anticipated date of initial startup. 5. Site-specific monitoring plan. 6. The site-specific...

  18. A Skills Map: The General and Specific Competencies Required in Different Occupations. Progress Report.

    ERIC Educational Resources Information Center

    Gottfredson, Linda S.

    To aid in assessing the employability of individuals and of various groups of individuals in different types of occupations, the general abilities and specific skills required of workers in different occupations were studied. Data on a comprehensive set of occupations were obtained from the Dictionary of Occupational Titles (DOT) job ratings and…

  19. 24 CFR 200.937 - Supplementary specific procedural requirements under HUD building product standards and...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 2 2011-04-01 2011-04-01 false Supplementary specific procedural requirements under HUD building product standards and certification program for plastic bathtub units, plastic shower receptors and stalls, plastic lavatories, plastic water closet bowls and tanks. 200.937 Section 200.937 Housing and Urban Developmen...

  20. Computer-Aided Discovery of Formal Specification Behavioral Requirements and Requirement to Implementation Mappings

    DTIC Science & Technology

    2014-01-01

    the executable SRM is developed according to the specification and marketing documents. Hence, for example, the Vehicles, Car, and Truck classes in...transitions ternary relation: transitions ⊆ states x transitionIDs x states, such as <"Init", "Tr1", " stP "> • A conditions unary relation bound to

  1. UTM UAS Service Supplier Specification

    NASA Technical Reports Server (NTRS)

    Rios, Joseph Lucio

    2017-01-01

    Within the Unmanned Aircraft Systems (UAS) Traffic Management (UTM) system, the UAS Service Supplier (USS) is a key component. The USS serves several functions. At a high level, those include the following: Bridging communication between UAS Operators and Flight Information Management System (FIMS) Supporting planning of UAS operations Assisting strategic deconfliction of the UTM airspace Providing information support to UAS Operators during operations Helping UAS Operators meet their formal requirements This document provides the minimum set of requirements for a USS. In order to be recognized as a USS within UTM, successful demonstration of satisfying the requirements described herein will be a prerequisite. To ensure various desired qualities (security, fairness, availability, efficiency, maintainability, etc.), this specification relies on references to existing public specifications whenever possible.

  2. Prefocal station mechanical design concept study for the E-ELT

    NASA Astrophysics Data System (ADS)

    Jolley, Paul; Brunetto, Enzo; Frank, Christoph; Lewis, Steffan; Marchetti, Enrico

    2016-07-01

    The Nasmyth platforms of the E-ELT will contain one Prefocal Station (PFS) each. The main PFS functional requirements are to provide a focal plane to the three Nasmyth focal stations and the Coudé focus, optical sensing supporting telescope low order optimisation and seeing limited image quality, and optical sensing supporting characterising and phasing of M1 and other telescope subsystems. The PFS user requirements are used to derive the PFS technical requirements specification that will form the basis for design, development and production of the system. This specification process includes high-level architectural decisions and technical performance budget allocations. The mechanical design concepts reported here have been developed in order to validate key system specifications and associated technical budgets.

  3. Toward identifying specification requirements for digital bone-anchored prosthesis design incorporating substructure fabrication: a pilot study.

    PubMed

    Eggbeer, Dominic; Bibb, Richard; Evans, Peter

    2006-01-01

    This paper is the first in a series that aims to identify the specification requirements for advanced digital technologies that may be used to design and fabricate complex, soft tissue facial prostheses. Following a review of previously reported techniques, appropriate and currently available technologies were selected and applied in a pilot study. This study uses a range of optical surface scanning, computerized tomography, computer-aided design, and rapid prototyping technologies to capture, design, and fabricate a bone-anchored auricular prosthesis, including the retentive components. The techniques are assessed in terms of their effectiveness, and the results are used to identify future research and specification requirements to direct developments. The case study identifies that while digital technologies may be used to design implant-retained facial prostheses, many limitations need to be addressed to make the techniques clinically viable. It also identifies the need to develop a more robust specification that covers areas such as resolution, accuracy, materials, and design, against which potential technologies may be assessed. There is a need to develop a specification against which potential technologies may be assessed for their suitability in soft tissue facial prosthetics. The specification will be developed using further experimental research studies.

  4. Atmospheric, Magnetospheric and plasmas in Space (AMPS) spacelab payload definition study; Volume 4: Part 3, Labcraft instrument systems general specification

    NASA Technical Reports Server (NTRS)

    Keeley, J. T.

    1976-01-01

    Guidelines and general requirements applicable to the development of instrument flight hardware intended for use on the GSFC Shuttle Scientific Payloads Program are given. Criteria, guidelines, and an organized approach to specifying the appropriate level of requirements for each instrument in order to permit its development at minimum cost while still assuring crew safety, are included. It is recognized that the instruments for these payloads will encompass wide ranges of complexity, cost, development risk, and safety hazards. The flexibility required to adapt the controls, documentation, and verification requirements in accord with the specific instrument is provided.

  5. Inertial Navigation System for India's Reusable Launch Vehicle-Technology Demonstrator (RLV-TD HEX) Mission

    NASA Astrophysics Data System (ADS)

    Umadevi, P.; Navas, A.; Karuturi, Kesavabrahmaji; Shukkoor, A. Abdul; Kumar, J. Krishna; Sreekumar, Sreejith; Basim, A. Mohammed

    2017-12-01

    This work presents the configuration of Inertial Navigation System (INS) used in India's Reusable Launch Vehicle-Technology Demonstrator (RLV-TD) Program. In view of the specific features and requirements of the RLV-TD, specific improvements and modifications were required in the INS. A new system was designed, realised and qualified meeting the mission requirements of RLV-TD, at the same time taking advantage of the flight heritage attained in INS through various Launch vehicle Missions of the country. The new system has additional redundancy in acceleration channel, in-built inclinometer based bias update scheme for acceleration channels and sign conventions as employed in an aircraft. Data acquisition in micro cycle periodicity (10 ms) was incorporated which was required to provide rate and attitude information at higher sampling rate for ascent phase control. Provision was incorporated for acquisition of rate and acceleration data with high resolution for aerodynamic characterisation and parameter estimation. GPS aided navigation scheme was incorporated to meet the stringent accuracy requirements of the mission. Navigation system configuration for RLV-TD, specific features incorporated to meet the mission requirements, various tests carried out and performance during RLV-TD flight are highlighted.

  6. Requirements for an Advanced Ocean Radiometer

    NASA Technical Reports Server (NTRS)

    Meister, Gerhard; McClain, Charles R.; Ahmad, Ziauddin; Bailey, Sean W.; Barnes, Robert A.; Brown, Steven; Eplee, Robert E.; Franz, Bryan; Holmes, Alan; Monosmith, W. Bryan; hide

    2011-01-01

    This document suggests requirements for an advanced ocean radiometer, such as e.g. the ACE (Aerosol/Cloud/Ecosystem) ocean radiometer. The ACE ocean biology mission objectives have been defined in the ACE Ocean Biology white paper. The general requirements presented therein were chosen as the basis for the requirements provided in this document, which have been transformed into specific, testable requirements. The overall accuracy goal for the advanced ocean radiometer is that the total radiometric uncertainties are 0.5% or smaller for all bands. Specific mission requirements of SeaWiFS, MODIS, and VIIRS were often used as a model for the requirements presented here, which are in most cases more demanding than the heritage requirements. Experience with on-orbit performance and calibration (from SeaWiFS and MODIS) and prelaunch testing (from SeaWiFS, MODIS, and VIIRS) were important considerations when formulating the requirements. This document describes requirements in terms of the science data products, with a focus on qualities that can be verified by prelaunch radiometric characterization. It is expected that a more comprehensive requirements document will be developed during mission formulation

  7. 49 CFR 179.201-1 - Individual specification requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW and 115AW) § 179.201-1...

  8. 20 CFR 401.120 - Disclosures required by law.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    .... We disclose information when a law specifically requires it. The Social Security Act requires us to... its benefit programs, U.S. Citizenship and Immigration Services to carry out its duties regarding...

  9. 20 CFR 401.120 - Disclosures required by law.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    .... We disclose information when a law specifically requires it. The Social Security Act requires us to... its benefit programs, U.S. Citizenship and Immigration Services to carry out its duties regarding...

  10. 20 CFR 401.120 - Disclosures required by law.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    .... We disclose information when a law specifically requires it. The Social Security Act requires us to... its benefit programs, U.S. Citizenship and Immigration Services to carry out its duties regarding...

  11. 20 CFR 401.120 - Disclosures required by law.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    .... We disclose information when a law specifically requires it. The Social Security Act requires us to... its benefit programs, U.S. Citizenship and Immigration Services to carry out its duties regarding...

  12. 20 CFR 401.120 - Disclosures required by law.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    .... We disclose information when a law specifically requires it. The Social Security Act requires us to... its benefit programs, U.S. Citizenship and Immigration Services to carry out its duties regarding...

  13. 40 CFR 25.14 - Termination of reporting requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... PARTICIPATION IN PROGRAMS UNDER THE RESOURCE CONSERVATION AND RECOVERY ACT, THE SAFE DRINKING WATER ACT, AND THE CLEAN WATER ACT § 25.14 Termination of reporting requirements. All reporting requirements specifically...

  14. 40 CFR 25.14 - Termination of reporting requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... PARTICIPATION IN PROGRAMS UNDER THE RESOURCE CONSERVATION AND RECOVERY ACT, THE SAFE DRINKING WATER ACT, AND THE CLEAN WATER ACT § 25.14 Termination of reporting requirements. All reporting requirements specifically...

  15. 40 CFR Appendix B to Part 60 - Performance Specifications

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... series of design and performance specifications and test procedures to certify opacity monitoring... Performance Specification 1? Performance Specification 1 (PS-1) provides (1) requirements for the design... apply to COMS data? The measurement uncertainties associated with COMS data result from several design...

  16. High-Speed Maglev Trains; German Safety Requirements

    DOT National Transportation Integrated Search

    1991-12-31

    This document is a translation of technology-specific safety requirements developed : for the German Transrapid Maglev technology. These requirements were developed by a : working group composed of representatives of German Federal Railways (DB), Tes...

  17. 46 CFR 119.410 - General requirements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... PASSENGERS OR WITH OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS MACHINERY INSTALLATION Specific Machinery Requirements § 119.410 General requirements. (a) Each starting motor, generator, and spark... on spring tension for their holding power. ...

  18. 46 CFR 119.410 - General requirements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... PASSENGERS OR WITH OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS MACHINERY INSTALLATION Specific Machinery Requirements § 119.410 General requirements. (a) Each starting motor, generator, and spark... on spring tension for their holding power. ...

  19. 46 CFR 119.410 - General requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... PASSENGERS OR WITH OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS MACHINERY INSTALLATION Specific Machinery Requirements § 119.410 General requirements. (a) Each starting motor, generator, and spark... on spring tension for their holding power. ...

  20. 46 CFR 119.410 - General requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... PASSENGERS OR WITH OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS MACHINERY INSTALLATION Specific Machinery Requirements § 119.410 General requirements. (a) Each starting motor, generator, and spark... on spring tension for their holding power. ...

  1. 46 CFR 119.410 - General requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... PASSENGERS OR WITH OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS MACHINERY INSTALLATION Specific Machinery Requirements § 119.410 General requirements. (a) Each starting motor, generator, and spark... on spring tension for their holding power. ...

  2. 49 CFR 178.255-1 - General requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Specifications for Portable Tanks § 178.255-1 General requirements. (a) Tanks must be of fusion welded... must be postweld heat treated as a unit. (d) Requirements concerning types of valves, retesting, and...

  3. Transforming Multidisciplinary Customer Requirements to Product Design Specifications

    NASA Astrophysics Data System (ADS)

    Ma, Xiao-Jie; Ding, Guo-Fu; Qin, Sheng-Feng; Li, Rong; Yan, Kai-Yin; Xiao, Shou-Ne; Yang, Guang-Wu

    2017-09-01

    With the increasing of complexity of complex mechatronic products, it is necessary to involve multidisciplinary design teams, thus, the traditional customer requirements modeling for a single discipline team becomes difficult to be applied in a multidisciplinary team and project since team members with various disciplinary backgrounds may have different interpretations of the customers' requirements. A new synthesized multidisciplinary customer requirements modeling method is provided for obtaining and describing the common understanding of customer requirements (CRs) and more importantly transferring them into a detailed and accurate product design specifications (PDS) to interact with different team members effectively. A case study of designing a high speed train verifies the rationality and feasibility of the proposed multidisciplinary requirement modeling method for complex mechatronic product development. This proposed research offersthe instruction to realize the customer-driven personalized customization of complex mechatronic product.

  4. A Highly Flexible, Automated System Providing Reliable Sample Preparation in Element- and Structure-Specific Measurements.

    PubMed

    Vorberg, Ellen; Fleischer, Heidi; Junginger, Steffen; Liu, Hui; Stoll, Norbert; Thurow, Kerstin

    2016-10-01

    Life science areas require specific sample pretreatment to increase the concentration of the analytes and/or to convert the analytes into an appropriate form for the detection and separation systems. Various workstations are commercially available, allowing for automated biological sample pretreatment. Nevertheless, due to the required temperature, pressure, and volume conditions in typical element and structure-specific measurements, automated platforms are not suitable for analytical processes. Thus, the purpose of the presented investigation was the design, realization, and evaluation of an automated system ensuring high-precision sample preparation for a variety of analytical measurements. The developed system has to enable system adaption and high performance flexibility. Furthermore, the system has to be capable of dealing with the wide range of required vessels simultaneously, allowing for less cost and time-consuming process steps. However, the system's functionality has been confirmed in various validation sequences. Using element-specific measurements, the automated system was up to 25% more precise compared to the manual procedure and as precise as the manual procedure using structure-specific measurements. © 2015 Society for Laboratory Automation and Screening.

  5. Association of Nondisease-Specific Problems with Mortality, Long-Term Care, and Functional Impairment among Older Adults Who Require Skilled Nursing Care after Dialysis Initiation

    PubMed Central

    Plantinga, Laura; Hall, Rasheeda K.; Mirk, Anna; Zhang, Rebecca; Kutner, Nancy

    2016-01-01

    Background and objectives The majority of older adults who initiate dialysis do so during a hospitalization, and these patients may require post-acute skilled nursing facility (SNF) care. For these patients, a focus on nondisease-specific problems, including cognitive impairment, depressive symptoms, exhaustion, falls, impaired mobility, and polypharmacy, may be more relevant to outcomes than the traditional disease-oriented approach. However, the association of the burden of nondisease-specific problems with mortality, transition to long-term care (LTC), and functional impairment among older adults receiving SNF care after dialysis initiation has not been studied. Design, setting, participants, & measurements We identified 40,615 Medicare beneficiaries ≥65 years old who received SNF care after dialysis initiation between 2000 and 2006 by linking renal disease registry data with the Minimum Data Set. Nondisease-specific problems were ascertained from the Minimum Data Set. We defined LTC as ≥100 SNF days and functional impairment as dependence in all four essential activities of daily living at SNF discharge. Associations of the number of nondisease-specific problems (≤1, 2, 3, and 4–6) with 6-month mortality, LTC, and functional impairment were examined. Results Overall, 39.2% of patients who received SNF care after dialysis initiation died within 6 months. Compared with those with ≤1 nondisease-specific problems, multivariable adjusted hazard ratios (95% confidence interval) for mortality were 1.26 (1.19 to 1.32), 1.40 (1.33 to 1.48), and 1.66 (1.57 to 1.76) for 2, 3, and 4–6 nondisease-specific problems, respectively. Among those who survived, 37.1% required LTC; of those remaining who did not require LTC, 74.7% had functional impairment. A higher likelihood of transition to LTC (among those who survived 6 months) and functional impairment (among those who survived and did not require LTC) was seen with a higher number of problems. Conclusions Identifying nondisease-specific problems may help patients and families anticipate LTC needs and functional impairment after dialysis initiation. PMID:27733436

  6. Association of Nondisease-Specific Problems with Mortality, Long-Term Care, and Functional Impairment among Older Adults Who Require Skilled Nursing Care after Dialysis Initiation.

    PubMed

    Bowling, C Barrett; Plantinga, Laura; Hall, Rasheeda K; Mirk, Anna; Zhang, Rebecca; Kutner, Nancy

    2016-12-07

    The majority of older adults who initiate dialysis do so during a hospitalization, and these patients may require post-acute skilled nursing facility (SNF) care. For these patients, a focus on nondisease-specific problems, including cognitive impairment, depressive symptoms, exhaustion, falls, impaired mobility, and polypharmacy, may be more relevant to outcomes than the traditional disease-oriented approach. However, the association of the burden of nondisease-specific problems with mortality, transition to long-term care (LTC), and functional impairment among older adults receiving SNF care after dialysis initiation has not been studied. We identified 40,615 Medicare beneficiaries ≥65 years old who received SNF care after dialysis initiation between 2000 and 2006 by linking renal disease registry data with the Minimum Data Set. Nondisease-specific problems were ascertained from the Minimum Data Set. We defined LTC as ≥100 SNF days and functional impairment as dependence in all four essential activities of daily living at SNF discharge. Associations of the number of nondisease-specific problems (≤1, 2, 3, and 4-6) with 6-month mortality, LTC, and functional impairment were examined. Overall, 39.2% of patients who received SNF care after dialysis initiation died within 6 months. Compared with those with ≤1 nondisease-specific problems, multivariable adjusted hazard ratios (95% confidence interval) for mortality were 1.26 (1.19 to 1.32), 1.40 (1.33 to 1.48), and 1.66 (1.57 to 1.76) for 2, 3, and 4-6 nondisease-specific problems, respectively. Among those who survived, 37.1% required LTC; of those remaining who did not require LTC, 74.7% had functional impairment. A higher likelihood of transition to LTC (among those who survived 6 months) and functional impairment (among those who survived and did not require LTC) was seen with a higher number of problems. Identifying nondisease-specific problems may help patients and families anticipate LTC needs and functional impairment after dialysis initiation. Copyright © 2016 by the American Society of Nephrology.

  7. Recruitment of Mediator Complex by Cell Type and Stage-Specific Factors Required for Tissue-Specific TAF Dependent Gene Activation in an Adult Stem Cell Lineage.

    PubMed

    Lu, Chenggang; Fuller, Margaret T

    2015-12-01

    Onset of terminal differentiation in adult stem cell lineages is commonly marked by robust activation of new transcriptional programs required to make the appropriate differentiated cell type(s). In the Drosophila male germ line stem cell lineage, the switch from proliferating spermatogonia to spermatocyte is accompanied by one of the most dramatic transcriptional changes in the fly, as over 1000 new transcripts turn on in preparation for meiosis and spermatid differentiation. Here we show that function of the coactivator complex Mediator is required for activation of hundreds of new transcripts in the spermatocyte program. Mediator appears to act in a sequential hierarchy, with the testis activating Complex (tMAC), a cell type specific form of the Mip/dREAM general repressor, required to recruit Mediator subunits to the chromatin, and Mediator function required to recruit the testis TAFs (tTAFs), spermatocyte specific homologs of subunits of TFIID. Mediator, tMAC and the tTAFs co-regulate expression of a major set of spermatid differentiation genes. The Mediator subunit Med22 binds the tMAC component Topi when the two are coexpressed in S2 cells, suggesting direct recruitment. Loss of Med22 function in spermatocytes causes meiosis I maturation arrest male infertility, similar to loss of function of the tMAC subunits or the tTAFs. Our results illuminate how cell type specific versions of the Mip/dREAM complex and the general transcription machinery cooperate to drive selective gene activation during differentiation in stem cell lineages.

  8. Spaceflight Human System Standards

    NASA Technical Reports Server (NTRS)

    Holubec, Keith; Tillman, Barry; Connolly, Jan

    2009-01-01

    NASA created a new approach for human system integration and human performance standards. NASA created two documents a standard and a reference handbook. The standard is titled NASA Space Flight Human-System Standard (SFHSS) and consists of two-volumes: Volume 1- Crew Health This volume covers standards needed to support astronaut health (medical care, nutrition, sleep, exercise, etc.) Volume 2 Human Factors, Habitability and Environmental Health This volume covers the standards for system design that will maintain astronaut performance (ie., environmental factors, design of facilities, layout of workstations, and lighting requirements). It includes classic human factors requirements. The new standards document is written in terms so that it is applicable to a broad range of present and future NASA systems. The document states that all new programs prepare system-specific requirements that will meet the general standards. For example, the new standard does not specify a design should accommodate specific percentiles of a defined population. Rather, NASA-STD-3001, Volume 2 states that all programs shall prepare program-specific requirements that define the user population and their size ranges. The design shall then accommodate the full size range of those users. The companion reference handbook, Human Integration Design Handbook (HIDH), was developed to capture the design consideration information from NASA-STD-3000, and adds spaceflight lessons learned, gaps in knowledge, example solutions, and suggests research to further mature specific disciplines. The HIDH serves two major purposes: HIDH is the reference document for writing human factors requirements for specific systems. HIDH contains design guidance information that helps insure that designers create systems which safely and effectively accommodate the capabilities and limitations of space flight crews.

  9. 48 CFR 552.236-77 - Specifications and Drawings

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Drawings 552.236-77 Section 552.236-77 Federal Acquisition Regulations System GENERAL SERVICES....236-77 Specifications and Drawings As prescribed in 536.570-8, insert the following clause: Specifications and Drawings (SEP 1999) The requirements of the clause entitled “Specifications and Drawings for...

  10. 49 CFR 223.15 - Requirements for existing passenger cars.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Requirements for existing passenger cars. 223.15... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION SAFETY GLAZING STANDARDS-LOCOMOTIVES, PASSENGER CARS AND CABOOSES Specific Requirements § 223.15 Requirements for existing passenger cars. (a) Passenger cars built or...

  11. 49 CFR 223.15 - Requirements for existing passenger cars.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Requirements for existing passenger cars. 223.15... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION SAFETY GLAZING STANDARDS-LOCOMOTIVES, PASSENGER CARS AND CABOOSES Specific Requirements § 223.15 Requirements for existing passenger cars. (a) Passenger cars built or...

  12. 49 CFR 223.15 - Requirements for existing passenger cars.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Requirements for existing passenger cars. 223.15... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION SAFETY GLAZING STANDARDS-LOCOMOTIVES, PASSENGER CARS AND CABOOSES Specific Requirements § 223.15 Requirements for existing passenger cars. (a) Passenger cars built or...

  13. 49 CFR 223.15 - Requirements for existing passenger cars.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Requirements for existing passenger cars. 223.15... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION SAFETY GLAZING STANDARDS-LOCOMOTIVES, PASSENGER CARS AND CABOOSES Specific Requirements § 223.15 Requirements for existing passenger cars. (a) Passenger cars built or...

  14. 49 CFR 223.15 - Requirements for existing passenger cars.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Requirements for existing passenger cars. 223.15... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION SAFETY GLAZING STANDARDS-LOCOMOTIVES, PASSENGER CARS AND CABOOSES Specific Requirements § 223.15 Requirements for existing passenger cars. (a) Passenger cars built or...

  15. 31 CFR 129.3 - Reporting requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Reporting requirements. 129.3 Section 129.3 Money and Finance: Treasury Regulations Relating to Money and Finance PORTFOLIO INVESTMENT SURVEY REPORTING § 129.3 Reporting requirements. (a) Notice of specific reporting requirements, including...

  16. Requirements for data integration platforms in biomedical research networks: a reference model

    PubMed Central

    Knaup, Petra

    2015-01-01

    Biomedical research networks need to integrate research data among their members and with external partners. To support such data sharing activities, an adequate information technology infrastructure is necessary. To facilitate the establishment of such an infrastructure, we developed a reference model for the requirements. The reference model consists of five reference goals and 15 reference requirements. Using the Unified Modeling Language, the goals and requirements are set into relation to each other. In addition, all goals and requirements are described textually in tables. This reference model can be used by research networks as a basis for a resource efficient acquisition of their project specific requirements. Furthermore, a concrete instance of the reference model is described for a research network on liver cancer. The reference model is transferred into a requirements model of the specific network. Based on this concrete requirements model, a service-oriented information technology architecture is derived and also described in this paper. PMID:25699205

  17. Review of the Constellation Level II Safety, Reliability, and Quality Assurance (SR&QA) Requirements Documents during Participation in the Constellation Level II SR&QA Forum

    NASA Technical Reports Server (NTRS)

    Cameron, Kenneth D.; Gentz, Steven J.; Beil, Robert J.; Minute, Stephen A.; Currie, Nancy J.; Scott, Steven S.; Thomas, Walter B., III; Smiles, Michael D.; Schafer, Charles F.; Null, Cynthia H.; hide

    2009-01-01

    At the request of the Exploration Systems Mission Directorate (ESMD) and the Constellation Program (CxP) Safety, Reliability; and Quality Assurance (SR&QA) Requirements Director, the NASA Engineering and Safety Center (NESC) participated in the Cx SR&QA Requirements forum. The Requirements Forum was held June 24-26; 2008, at GRC's Plum Brook Facility. The forums purpose was to gather all stakeholders into a focused meeting to help complete the process of refining the CxP to refine its Level II SR&QA requirements or defining project-specific requirements tailoring. Element prime contractors had raised specific questions about the wording and intent of many requirements in areas they felt were driving costs without adding commensurate value. NESC was asked to provide an independent and thorough review of requirements that contractors believed were driving Program costs, by active participation in the forum. This document contains information from the forum.

  18. 32 CFR 37.645 - Must I require periodic audits, as well as award-specific audits, of for-profit participants?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... amounts or adjusts performance outcomes. The periodic audit provides some assurance that the reported... 32 National Defense 1 2010-07-01 2010-07-01 false Must I require periodic audits, as well as award-specific audits, of for-profit participants? 37.645 Section 37.645 National Defense Department of Defense...

  19. Functional design specification for Stowage List And Hardware Tracking System (SLAHTS). [space shuttles

    NASA Technical Reports Server (NTRS)

    Keltner, D. J.

    1975-01-01

    This functional design specification defines the total systems approach to meeting the requirements stated in the Detailed Requirements Document for Stowage List and Hardware Tracking System for the space shuttle program. The stowage list and hardware tracking system is identified at the system and subsystem level with each subsystem defined as a function of the total system.

  20. 14 CFR 61.327 - Are there specific endorsement requirements to operate a light-sport aircraft based on VH?

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... to operate a light-sport aircraft based on VH? 61.327 Section 61.327 Aeronautics and Space FEDERAL... INSTRUCTORS, AND GROUND INSTRUCTORS Sport Pilots § 61.327 Are there specific endorsement requirements to operate a light-sport aircraft based on VH? (a) Except as specified in paragraph (c) of this section, if...

  1. 14 CFR 61.327 - Are there specific endorsement requirements to operate a light-sport aircraft based on VH?

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... to operate a light-sport aircraft based on VH? 61.327 Section 61.327 Aeronautics and Space FEDERAL... INSTRUCTORS, AND GROUND INSTRUCTORS Sport Pilots § 61.327 Are there specific endorsement requirements to operate a light-sport aircraft based on VH? (a) Except as specified in paragraph (c) of this section, if...

  2. 14 CFR 61.327 - Are there specific endorsement requirements to operate a light-sport aircraft based on VH?

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... to operate a light-sport aircraft based on VH? 61.327 Section 61.327 Aeronautics and Space FEDERAL... INSTRUCTORS, AND GROUND INSTRUCTORS Sport Pilots § 61.327 Are there specific endorsement requirements to operate a light-sport aircraft based on VH? (a) Except as specified in paragraph (c) of this section, if...

  3. 47 CFR 95.1121 - Specific requirements for wireless medical telemetry devices operating in the 1395-1400 and 1427...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... wireless medical telemetry devices operating in the 1395-1400 and 1427-1432 MHz bands. Due to the critical... 47 Telecommunication 5 2010-10-01 2010-10-01 false Specific requirements for wireless medical telemetry devices operating in the 1395-1400 and 1427-1432 MHz bands. 95.1121 Section 95.1121...

  4. 14 CFR 61.327 - Are there specific endorsement requirements to operate a light-sport aircraft based on VH?

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... to operate a light-sport aircraft based on VH? 61.327 Section 61.327 Aeronautics and Space FEDERAL... INSTRUCTORS, AND GROUND INSTRUCTORS Sport Pilots § 61.327 Are there specific endorsement requirements to operate a light-sport aircraft based on VH? (a) Except as specified in paragraph (c) of this section, if...

  5. Manpower Systems Integration Factors for Frigate Design in the Turkish Navy

    DTIC Science & Technology

    2016-12-01

    factors for frigate design in the Turkish Navy. The qualitative and quantitative analyses of the correlation between ship design specifications and...frigates. The correlation between the ship design characteristics and the manpower requirements is supported by the quantitative analysis. This... design in the Turkish Navy. The qualitative and quantitative analyses of the correlation between ship design specifications and manpower requirements

  6. IDC System Specification Document Version 1.1.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Harris, James M.; Lober, Randall R.

    2015-02-01

    This document contains the system specifications derived to satisfy the system requirements found in the IDC System Requirements Document for the IDC Reengineering Phase 2 project. Revisions Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Reengineering Project Team Initial delivery M. Harris V1.1 2/2015 IDC Reengineering Project Team Iteration I2 Review Comments M. Harris

  7. Specifications of the International Cooperation Administration for DDT water-dispersible powder for use in malaria control programmes

    PubMed Central

    Pearce, George W.; Gooden, E. L.; Johnson, Donald R.

    1959-01-01

    Background information is presented on the development of specifications for 75% DDT water-dispersible powder for use in malaria control programmes supported by the International Cooperation Administration (ICA) of the United States Government. Early difficulties with DDT powders used in these programmes were investigated and it was found that the most critical requirements involved packaging, suspensibility and storage stability. ICA specifications were evolved to meet these requirements. The suspensibility test developed is described, and the importance of inspection of the material procured is discussed. PMID:14431217

  8. Space Generic Open Avionics Architecture (SGOAA) standard specification

    NASA Technical Reports Server (NTRS)

    Wray, Richard B.; Stovall, John R.

    1993-01-01

    The purpose of this standard is to provide an umbrella set of requirements for applying the generic architecture interface model to the design of a specific avionics hardware/software system. This standard defines a generic set of system interface points to facilitate identification of critical interfaces and establishes the requirements for applying appropriate low level detailed implementation standards to those interface points. The generic core avionics system and processing architecture models provided herein are robustly tailorable to specific system applications and provide a platform upon which the interface model is to be applied.

  9. Instructions for Plastic Encapsulated Microcircuit(PEM) Selection, Screening and Qualification.

    NASA Technical Reports Server (NTRS)

    King, Terry; Teverovsky, Alexander; Leidecker, Henning

    2002-01-01

    The use of Plastic Encapsulated Microcircuits (PEMs) is permitted on NASA Goddard Space Flight Center (GSFC) spaceflight applications, provided each use is thoroughly evaluated for thermal, mechanical, and radiation implications of the specific application and found to meet mission requirements. PEMs shall be selected for their functional advantage and availability, not for cost saving; the steps necessary to ensure reliability usually negate any initial apparent cost advantage. A PEM shall not be substituted for a form, fit and functional equivalent, high reliability, hermetic device in spaceflight applications. Due to the rapid change in wafer-level designs typical of commercial parts and the unknown traceability between packaging lots and wafer lots, lot specific testing is required for PEMs, unless specifically excepted by the Mission Assurance Requirements (MAR) for the project. Lot specific qualification, screening, radiation hardness assurance analysis and/or testing, shall be consistent with the required reliability level as defined in the MAR. Developers proposing to use PEMs shall address the following items in their Performance Assurance Implementation Plan: source selection (manufacturers and distributors), storage conditions for all stages of use, packing, shipping and handling, electrostatic discharge (ESD), screening and qualification testing, derating, radiation hardness assurance, test house selection and control, data collection and retention.

  10. 49 CFR 179.500-1 - Tanks built under these specifications shall meet the requirements of § 179.500.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specification for Cryogenic Liquid Tank Car Tanks and...

  11. 7 CFR 58.328 - Salt.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... SPECIFICATIONS FOR APPROVED PLANTS AND STANDARDS FOR GRADES OF DAIRY PRODUCTS 1 General Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Quality Specifications for Raw Material § 58... requirements of The Food Chemical Codex. ...

  12. 7 CFR 58.328 - Salt.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... SPECIFICATIONS FOR APPROVED PLANTS AND STANDARDS FOR GRADES OF DAIRY PRODUCTS 1 General Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Quality Specifications for Raw Material § 58... requirements of The Food Chemical Codex. ...

  13. 7 CFR 58.328 - Salt.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... SPECIFICATIONS FOR APPROVED PLANTS AND STANDARDS FOR GRADES OF DAIRY PRODUCTS 1 General Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Quality Specifications for Raw Material § 58... requirements of The Food Chemical Codex. ...

  14. 7 CFR 58.328 - Salt.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... SPECIFICATIONS FOR APPROVED PLANTS AND STANDARDS FOR GRADES OF DAIRY PRODUCTS 1 General Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Quality Specifications for Raw Material § 58... requirements of The Food Chemical Codex. ...

  15. STS users study (study 2.2). Volume 2: STS users plan (user data requirements) study

    NASA Technical Reports Server (NTRS)

    Pritchard, E. I.

    1975-01-01

    Pre-flight scheduling and pre-flight requirements of the space transportation system are discussed. Payload safety requirements, shuttle flight manifests, and interface specifications are studied in detail.

  16. Information governance in NHS's NPfIT: a case for policy specification.

    PubMed

    Becker, Moritz Y

    2007-01-01

    The National Health Service's (NHS's) National Programme for Information Technology (NPfIT) in the UK with its proposed nation-wide online health record service poses serious technical challenges, especially with regard to access control and patient confidentiality. The complexity of the confidentiality requirements and their constantly evolving nature (due to changes in law, guidelines and ethical consensus) make traditional technologies such as role-based access control (RBAC) unsuitable. Furthermore, a more formal approach is also needed for debating about and communicating on information governance, as natural-language descriptions of security policies are inherently ambiguous and incomplete. Our main goal is to convince the reader of the strong benefits of employing formal policy specification in nation-wide electronic health record (EHR) projects. Many difficulties could be alleviated by specifying the requirements in a formal authorisation policy language such as Cassandra. The language is unambiguous, declarative and machine-enforceable, and is based on distributed constrained Datalog. Cassandra is interpreted within a distributed Trust Management environment, where digital credentials are used for establishing mutual trust between strangers. To demonstrate how policy specification can be applied to NPfIT, we translate a fragment of natural-language NHS specification into formal Cassandra rules. In particular, we present policy rules pertaining to the management of Clinician Sealed Envelopes, the mechanism by which clinical patient data can be concealed in the nation-wide EHR service. Our case study exposes ambiguities and incompletenesses in the informal NHS documents. We strongly recommend the use of trust management and policy specification technology for the implementation of nation-wide EHR infrastructures. Formal policies can be used for automatically enforcing confidentiality requirements, but also for specification and communication purposes. Formalising the requirements also reveals ambiguities and missing details in the currently used informal specification documents.

  17. Prion-specific Hsp40 function: The role of the auxilin homolog Swa2

    PubMed Central

    Oliver, Emily E.; Troisi, Elizabeth M.; Hines, Justin K.

    2017-01-01

    ABSTRACT Yeast prions are protein-based genetic elements that propagate through cell populations via cytosolic transfer from mother to daughter cell. Molecular chaperone proteins including Hsp70, the Hsp40/J-protein Sis1, and Hsp104 are required for continued prion propagation, however the specific requirements of chaperone proteins differ for various prions. We recently reported that Swa2, the yeast homolog of the mammalian protein auxilin, is specifically required for the propagation of the prion [URE3].1 [URE3] propagation requires both a functional J-domain and the tetratricopeptide repeat (TPR) domain of Swa2, but does not require Swa2 clathrin binding. We concluded that the TPR domain determines the specificity of the genetic interaction between Swa2 and [URE3], and that this domain likely interacts with one or more proteins with a C-terminal EEVD motif. Here we extend that analysis to incorporate additional data that supports this hypothesis. We also present new data eliminating Hsp104 as the relevant Swa2 binding partner and discuss our findings in the context of other recent work involving Hsp90. Based on these findings, we propose a new model for Swa2's involvement in [URE3] propagation in which Swa2 and Hsp90 mediate the formation of a multi-protein complex that increases the number of sites available for Hsp104 disaggregation. PMID:28574745

  18. Characterization of Monomethyihydrazine (MMH) Non-Volatile Residue

    NASA Technical Reports Server (NTRS)

    Davis, Chuck; Howard, Philip M.

    2009-01-01

    The Space Shuttle program has a unique propellant purity requirement for determination of nonvolatile residue (NVR) in monomethylhydrazine (MMH). TIis requirement differs from the Military Specification procurement specification by requiring a NVR analysis with a limit of less than or equal to 10 milligrams per liter. In June 2008, a routine MMH replenishment delivery was transferred into a NASA KSC owned tanker for future delivery to the Space Shuffle pad MMH storage tank. Per Shuffle standard operating procedure, the receiving tanker was sampled and analyzed for purity and surprisingly it failed the Shuttle use NVR specification limit. Detailed examination of the NVR revealed that it was fundamentally different than the typical MMH NVR. This paper will examine various aspects of NVR determination in MMH and the analytical characterization processes used to identify the NVR.

  19. Physical therapy workforce shortage for aging and aged societies in Thailand.

    PubMed

    Kraiwong, Ratchanok; Vongsirinavarat, Mantana; Soonthorndhada, Kusol

    2014-07-01

    According to demographic changes, the size of the aging population has rapidly increased. Thailand has been facing the "aging society" since 2005 and the "aged society" has been projected to appear by the year 2025. Increased life expectancy is associated with health problems and risks, specifically chronic diseases and disability. Aging and aged societies and related specific conditions as stroke require the provision of services from health professionals. The shortage of the physical therapy workforce in Thailand has been reported. This study investigated the size of physical therapy workforce required for the approaching aging society of Thailand and estimated the number of needed physical therapists, specifically regarding stroke condition. Evidently, the issue of the physical therapy workforce to serve aging and aged societies in Thailand requires advocating and careful arranging.

  20. NASA/aircraft industry standard specification for graphite fiber toughened thermoset resin composite material

    NASA Technical Reports Server (NTRS)

    1985-01-01

    A standard specification for a selected class of graphite fiber/toughened thermoset resin matrix material was developed through joint NASA/Aircraft Industry effort. This specification was compiled to provide uniform requirements and tests for qualifying prepreg systems and for acceptance of prepreg batches. The specification applies specifically to a class of composite prepreg consisting of unidirectional graphite fibers impregnated with a toughened thermoset resin that produce laminates with service temperatures from -65 F to 200 F when cured at temperatures below or equal to 350 F. The specified prepreg has a fiber areal weight of 145 g sq m. The specified tests are limited to those required to set minimum standards for the uncured prepreg and cured laminates, and are not intended to provide design allowable properties.

  1. 34 CFR 303.206 - Referral policies for specific children.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 34 Education 2 2012-07-01 2012-07-01 false Referral policies for specific children. 303.206... Referral policies for specific children. Each application must include the State's policies and procedures that require the referral for early intervention services under this part of specific children under...

  2. 40 CFR 86.1313-98 - Fuel specifications.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 20 2012-07-01 2012-07-01 false Fuel specifications. 86.1313-98... § 86.1313-98 Fuel specifications. Section 86.1313-98 includes text that specifies requirements that... fuel for diesel engines meeting the specifications in Table N98-2, or substantially equivalent...

  3. 40 CFR 86.1313-98 - Fuel specifications.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 19 2011-07-01 2011-07-01 false Fuel specifications. 86.1313-98... § 86.1313-98 Fuel specifications. Section 86.1313-98 includes text that specifies requirements that... fuel for diesel engines meeting the specifications in Table N98-2, or substantially equivalent...

  4. 40 CFR 86.1313-98 - Fuel specifications.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 20 2013-07-01 2013-07-01 false Fuel specifications. 86.1313-98... § 86.1313-98 Fuel specifications. Section 86.1313-98 includes text that specifies requirements that... fuel for diesel engines meeting the specifications in Table N98-2, or substantially equivalent...

  5. Automatically Grading Customer Confidence in a Formal Specification.

    ERIC Educational Resources Information Center

    Shukur, Zarina; Burke, Edmund; Foxley, Eric

    1999-01-01

    Describes an automatic grading system for a formal methods computer science course that is able to evaluate a formal specification written in the Z language. Quality is measured by considering first, specification correctness (syntax, semantics, and satisfaction of customer requirements), and second, specification maintainability (comparison of…

  6. 40 CFR 63.504 - Additional requirements for performance testing.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 9 2010-07-01 2010-07-01 false Additional requirements for performance... Additional requirements for performance testing. (a) Performance testing shall be conducted in accordance.... Sections 63.484 through 63.501 also contain specific testing requirements. (1) Performance tests shall be...

  7. Primary auditory cortex regulates threat memory specificity.

    PubMed

    Wigestrand, Mattis B; Schiff, Hillary C; Fyhn, Marianne; LeDoux, Joseph E; Sears, Robert M

    2017-01-01

    Distinguishing threatening from nonthreatening stimuli is essential for survival and stimulus generalization is a hallmark of anxiety disorders. While auditory threat learning produces long-lasting plasticity in primary auditory cortex (Au1), it is not clear whether such Au1 plasticity regulates memory specificity or generalization. We used muscimol infusions in rats to show that discriminatory threat learning requires Au1 activity specifically during memory acquisition and retrieval, but not during consolidation. Memory specificity was similarly disrupted by infusion of PKMζ inhibitor peptide (ZIP) during memory storage. Our findings show that Au1 is required at critical memory phases and suggest that Au1 plasticity enables stimulus discrimination. © 2016 Wigestrand et al.; Published by Cold Spring Harbor Laboratory Press.

  8. Ir gene controlled carrier effects in the induction and elicitation of hapten-specific delayed-type hypersensitivity responses.

    PubMed

    Weinberger, J Z; Benacerraf, B; Dorf, M E

    1979-11-01

    The genetic requirements of carrier recognition were examined in the priming and elicitation of hapten specific, T-cell mediated, delayed-type hypersensitivity (DTH) responses. It was shown that nitrophenyl acetyl-poly-(L-glu56-L-lys35-L-phe9) (NP-GLO) could prime for NP responses only in strains of mice which are Ir gene responders to GLO. In contrast to this requirement, NO-GLO could elicit an NP-specific response in NP-bovine gamma globulin primed mice, even in GLO nonresponder strains. Furthermore, the nonimmunogenic molecule, NP-GL, could elicit an NP-specific DTH response in animals primed with NP on an immunogenic carrier.

  9. Bipolar Nickel-hydrogen Batteries for Aerospace Applications

    NASA Technical Reports Server (NTRS)

    Koehler, C. W.; Vanommering, G.; Puester, N. H.; Puglisi, V. J.

    1984-01-01

    A bipolar nickel-hydrogen battery which effectively addresses all key requirements for a spacecraft power system, including long-term reliability and low mass, is discussed. The design of this battery is discussed in the context of system requirements and nickel-hydrogen battery technology in general. To achieve the ultimate goal of an aerospace application of a bipolar Ni-H2 battery several objectives must be met in the design and development of the system. These objectives include: maximization of reliability and life; high specific energy and energy density; reasonable cost of manufacture, test, and integration; and ease in scaling for growth in power requirements. These basic objectives translate into a number of specific design requirements, which are discussed.

  10. Conceptual design studies of control and instrumentation systems for ignition experiments

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nicholson, P.J.; Dewolf, J.B.; Heinemann, P.C.

    1978-03-01

    Studies at the Charles Stark Draper Laboratory in the past year were a continuation of prior studies of control and instrumentation systems for current and next generation Tokomaks. Specifically, the FY 77 effort has focused on the following two main efforts: (1) control requirements--(a) defining and evolving control requirements/concepts for a prototype experimental power reactor(s), and (b) defining control requirements for diverters and mirror machines, specifically the MX; and (2) defining requirements and scoping design for a functional control simulator. Later in the year, a small additional task was added: (3) providing analysis and design support to INESCO for itsmore » low cost fusion power system, FPC/DMT.« less

  11. [Status and suggestions for adjuvant standard for Chinese materia medica processing in China].

    PubMed

    Yang, Chun-Yu; Cao, Hui; Wang, Xiao-Tao; Tu, Jia-Sheng; Qian, Zhong-Zhi; Yu, Zhi-Ling; Shang, Yue; Zhang, Bao-Xian

    2017-04-01

    In this paper, the status of adjuvant standard for Chinese materia medica processing in the Chinese Pharmacopoeia 2015 edition, the National Specification of Chinese Materia Medica Processing, and the 29 provincial specification of Chinese materia medica was summarized, and the the status including general requirements, specific requirements, and quality standard in the three grade official specifications was collected and analyzed according to the "medicine-adjuvant homology" and "food-adjuvant homology" features of adjuvants. This paper also introduced the research situation of adjuvant standard for Chinese materia medica processing in China; In addition, analyzed and discussed the problems existing in the standard system of adjuvant for Chinese materia medica processing, such as lack of general requirements, low level of standard, inconsistent standard references, and lack of research on the standard, and provided suggestions for the further establishment of the national standards system of adjuvant for Chinese materia medica processing. Copyright© by the Chinese Pharmaceutical Association.

  12. Specific application for Oak Ridge National Laboratory dismantlement of Building 3004. Appendix A -- Quality assurance plan; Appendix B -- Records management plan

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    This quality assurance (QA) plan defines the QA requirements for the dismantlement and removal of Building 3004 at Oak Ridge National Laboratory (ORNL). The building is a four-story wooden trained structure with wooden siding, which resides approximately 150 ft west of the Bulk Shielding Reactor, and only several feet away from the visitors entrance to the Graphite Reactor museum. Complete descriptions and sketches are in the Performance Specification document for this project. This project is being conducted as a non-CERCLA maintenance action. This plan is an appendix to the QA plan for the ORNL Environmental Restoration (ER) Program. ORNL/ER-225, whichmore » is the source of the project QA requirements, tailors those QA requirements to the specific needs of this project as defined in ORNL/ER-225. Project-specific description and organization are also provided in this plan. Appendix B, Records Management Plan, is included.« less

  13. Preparing a successful, role-specific curriculum vitae.

    PubMed

    Price, Bob

    2014-10-07

    An internet search reveals just how many articles there are on preparing a curriculum vitae (CV). The preparation of a CV should not be regarded as a 'one-off' event, to be updated periodically. A successful CV requires thoughtful preparation to ensure it is directed towards a specific post and should consider two important perspectives. First, an understanding of what is required of the practitioner in the nursing post (demand), and second, what the nurse can offer in terms of his or her skills, experience, qualities and qualifications (supply). The demands of the post will also include meeting professional standards, such as those that have emerged following consideration of the Report of the Mid Staffordshire NHS Foundation Trust Public Inquiry (Francis 2013). This article explores how to prepare a successful CV for a specific role, using a demand and supply perspective--where a nurse seeks to match the specific requirements of the post by summarising what he or she has to offer.

  14. Expanded functions for a family of plant intracellular immune receptors beyond specific recognition of pathogen effectors

    PubMed Central

    Bonardi, Vera; Tang, Saijun; Stallmann, Anna; Roberts, Melinda; Cherkis, Karen; Dangl, Jeffery L.

    2011-01-01

    Plants and animals deploy intracellular immune receptors that perceive specific pathogen effector proteins and microbial products delivered into the host cell. We demonstrate that the ADR1 family of Arabidopsis nucleotide-binding leucine-rich repeat (NB-LRR) receptors regulates accumulation of the defense hormone salicylic acid during three different types of immune response: (i) ADRs are required as “helper NB-LRRs” to transduce signals downstream of specific NB-LRR receptor activation during effector-triggered immunity; (ii) ADRs are required for basal defense against virulent pathogens; and (iii) ADRs regulate microbial-associated molecular pattern-dependent salicylic acid accumulation induced by infection with a disarmed pathogen. Remarkably, these functions do not require an intact P-loop motif for at least one ADR1 family member. Our results suggest that some NB-LRR proteins can serve additional functions beyond canonical, P-loop–dependent activation by specific virulence effectors, extending analogies between intracellular innate immune receptor function from plants and animals. PMID:21911370

  15. Capabilities needed for the next generation of thermo-hydraulic codes for use in real time applications

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Arndt, S.A.

    1997-07-01

    The real-time reactor simulation field is currently at a crossroads in terms of the capability to perform real-time analysis using the most sophisticated computer codes. Current generation safety analysis codes are being modified to replace simplified codes that were specifically designed to meet the competing requirement for real-time applications. The next generation of thermo-hydraulic codes will need to have included in their specifications the specific requirement for use in a real-time environment. Use of the codes in real-time applications imposes much stricter requirements on robustness, reliability and repeatability than do design and analysis applications. In addition, the need for codemore » use by a variety of users is a critical issue for real-time users, trainers and emergency planners who currently use real-time simulation, and PRA practitioners who will increasingly use real-time simulation for evaluating PRA success criteria in near real-time to validate PRA results for specific configurations and plant system unavailabilities.« less

  16. Poliovirus intrahost evolution is required to overcome tissue-specific innate immune responses.

    PubMed

    Xiao, Yinghong; Dolan, Patrick Timothy; Goldstein, Elizabeth Faul; Li, Min; Farkov, Mikhail; Brodsky, Leonid; Andino, Raul

    2017-08-29

    RNA viruses, such as poliovirus, have a great evolutionary capacity, allowing them to quickly adapt and overcome challenges encountered during infection. Here we show that poliovirus infection in immune-competent mice requires adaptation to tissue-specific innate immune microenvironments. The ability of the virus to establish robust infection and virulence correlates with its evolutionary capacity. We further identify a region in the multi-functional poliovirus protein 2B as a hotspot for the accumulation of minor alleles that facilitate a more effective suppression of the interferon response. We propose that population genetic dynamics enables poliovirus spread between tissues through optimization of the genetic composition of low frequency variants, which together cooperate to circumvent tissue-specific challenges. Thus, intrahost virus evolution determines pathogenesis, allowing a dynamic regulation of viral functions required to overcome barriers to infection.RNA viruses, such as polioviruses, have a great evolutionary capacity and can adapt quickly during infection. Here, the authors show that poliovirus infection in mice requires adaptation to innate immune microenvironments encountered in different tissues.

  17. ITS component specification. Appendix A, Requirements per component

    DOT National Transportation Integrated Search

    1997-01-01

    The objective of the Polaris Project is to define an Intelligent Transportation Systems (ITS) architecture for the state of Minnesota. This appendix lists the requirements that have been allocated to each component. The requirements for each componen...

  18. Appraisal of work ability in relation to job-specific health requirements in ambulance workers.

    PubMed

    van Schaaijk, A; Boschman, J S; Frings-Dresen, M H W; Sluiter, J K

    2017-01-01

    To gain insight into which job-specific health requirements relate to work ability, the following two research questions were formulated: Which job-specific health requirements are associated with the appraisal of work ability in ambulance drivers and paramedics? How are appraisals of physical and mental work ability associated with the appraisal of overall work ability in ambulance drivers and paramedics? Workers Health Surveillance cross-sectional data of 506 ambulance workers (236 drivers and 270 paramedics) were used. The tests for specific job requirements were divided into six categories. Work ability was appraised as overall, physical and mental/emotional. Multiple linear stepwise regression analyses were used to model the associations. Outcomes in 'raised alertness and judgment ability' (R 2  = 0.09), 'job-specific physical abilities' (R 2  = 0.10) and 'emotional peak load' (R 2  = 0.07) significantly explained appraised overall, physical and mental/emotional work ability. Physical and mental/emotional work ability together explained 48.3% of the variance of overall work ability. The explained variance by physical and mental/emotional work ability was almost 4% higher in drivers than in paramedics. Overall work ability was significantly explained by outcomes in 'raised alertness and judgment ability' and 'emotional peak load.' Physical work ability was significantly explained by 'job-specific physical abilities' and 'raised alertness and judgment ability' outcomes, while 'emotional peak load' and 'raised alertness and judgment ability' outcomes significantly explained mental/emotional work ability. Physical and mental/emotional work ability explains the same proportion of variance in overall work ability.

  19. Ethnic disparities in the dietary requirement for vitamin D during pregnancy: considerations for nutrition policy and research.

    PubMed

    O'Callaghan, Karen M; Kiely, Mairead E

    2018-05-01

    Despite the inverse association between skin colour and efficiency of cutaneous vitamin D synthesis, in addition to the widely accepted racial disparity in vitamin D status, populations of ethnic minority are understudied in terms of setting target serum 25-hydroxyvitamin D concentrations and corresponding dietary requirements for vitamin D. In minority groups, prevention of vitamin D deficiency on a population basis is challenging due to the lack of clarity surrounding the metabolism and transport of vitamin D. Authoritative agencies have been unable to define pregnancy-specific dietary recommendations for vitamin D, owing to an absence of sufficient evidence to confirm whether nutritional requirements for vitamin D are altered during pregnancy. While the question of setting race- and pregnancy-specific dietary reference values for vitamin D has not been addressed to date, endemic vitamin D deficiency has been reported among gravidae worldwide, specifically among ethnic minorities and white women resident at high latitude. In light of the increased risk of nutritional rickets among infants of ethnic minority, coupled with growing evidence for potential non-skeletal roles of vitamin D in perinatal health, determination of the dietary vitamin D requirement that will prevent deficiency during pregnancy is a research priority. However, systematic approaches to establishing dietary requirements are limited by the quality of the available evidence and the under-representation of minority groups in clinical research. This review considers the evidence for racial differences in vitamin D status and response to vitamin D supplementation, with particular application to pregnancy-specific requirements among ethnic minorities resident at high latitudes.

  20. Development of a web-based and mobile app to support physical activity in individuals with rheumatoid arthritis: results from the second step of a co-design process.

    PubMed

    Revenäs, Åsa; Opava, Christina H; Martin, Cathrin; Demmelmaier, Ingrid; Keller, Christina; Åsenlöf, Pernilla

    2015-02-09

    Long-term adherence to physical activity recommendations remains challenging for most individuals with rheumatoid arthritis (RA) despite evidence for its health benefits. The aim of this study was to provide basic data on system requirement specifications for a Web-based and mobile app to self-manage physical activity. More specifically, we explored the target user group, features of the future app, and correlations between the system requirements and the established behavior change techniques (BCTs). We used a participatory action research design. Qualitative data were collected using multiple methods in four workshops. Participants were 5 individuals with RA, a clinical physiotherapist, an officer from the Swedish Rheumatism Association, a Web designer, and 2 physiotherapy researchers. A taxonomy was used to determine the degree of correlation between the system requirements and established BCTs. Participants agreed that the future Web-based and mobile app should be based on two major components important for maintaining physical activity: (1) a calendar feature for goal setting, planning, and recording of physical activity performance and progress, and (2) a small community feature for positive feedback and support from peers. All system requirements correlated with established BCTs, which were coded as 24 different BCTs. To our knowledge, this study is the first to involve individuals with RA as co-designers, in collaboration with clinicians, researchers, and Web designers, to produce basic data to generate system requirement specifications for an eHealth service. The system requirements correlated to the BCTs, making specifications of content and future evaluation of effectiveness possible.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top