Solving the negative impact of congestion in the postanesthesia care unit: a cost of opportunity analysis.

PubMed

Ruiz-Patiño, Alejandro; Acosta-Ospina, Laura Elena; Rueda, Juan-David

2017-04-01

Congestion in the postanesthesia care unit (PACU) leads to the formation of waiting queues for patients being transferred after surgery, negatively affecting hospital resources. As patients recover in the operating room, incoming surgeries are delayed. The purpose of this study was to establish the impact of this phenomenon in multiple settings. An operational mathematical study based on the queuing theory was performed. Average queue length, average queue waiting time, and daily queue waiting time were evaluated. Calculations were based on the mean patient daily flow, PACU length of stay, occupation, and current number of beds. Data was prospectively collected during a period of 2 months, and the entry and exit time was recorded for each patient taken to the PACU. Data was imputed in a computational model made with MS Excel. To account for data uncertainty, deterministic and probabilistic sensitivity analyses for all dependent variables were performed. With a mean patient daily flow of 40.3 and an average PACU length of stay of 4 hours, average total lost surgical opportunity time was estimated at 2.36 hours (95% CI: 0.36-4.74 hours). Cost of opportunity was calculated at $1592 per lost hour. Sensitivity analysis showed that an increase of two beds is required to solve the queue formation. When congestion has a negative impact on cost of opportunity in the surgical setting, queuing analysis grants definitive actions to solve the problem, improving quality of service and resource utilization. Copyright © 2016 Elsevier Inc. All rights reserved.

Optimal routing and buffer allocation for a class of finite capacity queueing systems

NASA Technical Reports Server (NTRS)

Towsley, Don; Sparaggis, Panayotis D.; Cassandras, Christos G.

1992-01-01

The problem of routing jobs to K parallel queues with identical exponential servers and unequal finite buffer capacities is considered. Routing decisions are taken by a controller which has buffering space available to it and may delay routing of a customer to a queue. Using ideas from weak majorization, it is shown that the shorter nonfull queue delayed (SNQD) policy minimizes both the total number of customers in the system at any time and the number of customers that are rejected by that time. The SNQD policy always delays routing decisions as long as all servers are busy. Only when all the buffers at the controller are occupied is a customer routed to the queue with the shortest queue length that is not at capacity. Moreover, it is shown that, if a fixed number of buffers is to be distributed among the K queues, then the optimal allocation scheme is the one in which the difference between the maximum and minimum queue capacities is minimized, i.e., becomes either 0 or 1.

Departure Queue Prediction for Strategic and Tactical Surface Scheduler Integration

NASA Technical Reports Server (NTRS)

Zelinski, Shannon; Windhorst, Robert

2016-01-01

A departure metering concept to be demonstrated at Charlotte Douglas International Airport (CLT) will integrate strategic and tactical surface scheduling components to enable the respective collaborative decision making and improved efficiency benefits these two methods of scheduling provide. This study analyzes the effect of tactical scheduling on strategic scheduler predictability. Strategic queue predictions and target gate pushback times to achieve a desired queue length are compared between fast time simulations of CLT surface operations with and without tactical scheduling. The use of variable departure rates as a strategic scheduler input was shown to substantially improve queue predictions over static departure rates. With target queue length calibration, the strategic scheduler can be tuned to produce average delays within one minute of the tactical scheduler. However, root mean square differences between strategic and tactical delays were between 12 and 15 minutes due to the different methods the strategic and tactical schedulers use to predict takeoff times and generate gate pushback clearances. This demonstrates how difficult it is for the strategic scheduler to predict tactical scheduler assigned gate delays on an individual flight basis as the tactical scheduler adjusts departure sequence to accommodate arrival interactions. Strategic/tactical scheduler compatibility may be improved by providing more arrival information to the strategic scheduler and stabilizing tactical scheduler changes to runway sequence in response to arrivals.

A novel fair active queue management algorithm based on traffic delay jitter

NASA Astrophysics Data System (ADS)

Wang, Xue-Shun; Yu, Shao-Hua; Dai, Jin-You; Luo, Ting

2009-11-01

In order to guarantee the quantity of data traffic delivered in the network, congestion control strategy is adopted. According to the study of many active queue management (AQM) algorithms, this paper proposes a novel active queue management algorithm named JFED. JFED can stabilize queue length at a desirable level by adjusting output traffic rate and adopting a reasonable calculation of packet drop probability based on buffer queue length and traffic jitter; and it support burst packet traffic through the packet delay jitter, so that it can traffic flow medium data. JFED impose effective punishment upon non-responsible flow with a full stateless method. To verify the performance of JFED, it is implemented in NS2 and is compared with RED and CHOKe with respect to different performance metrics. Simulation results show that the proposed JFED algorithm outperforms RED and CHOKe in stabilizing instantaneous queue length and in fairness. It is also shown that JFED enables the link capacity to be fully utilized by stabilizing the queue length at a desirable level, while not incurring excessive packet loss ratio.

Multifractal Internet Traffic Model and Active Queue Management

DTIC Science & Technology

2003-01-01

dropped by the Adaptive RED , ssthresh decreases from 64KB to 4KB and the new con- gestion window cwnd is decreased from 8KB to 1KB (Tahoe). The situation...method to predict the queuing behavior of FIFO and RED queues. In order to satisfy a given delay and jitter requirement for real time connections, and to...5.2 Vulnerability of Adaptive RED to Web-mice . . . . . . . . . . . . . 103 5.3 A Parallel Virtual Queues Structure

The Supermarket Model with Bounded Queue Lengths in Equilibrium

NASA Astrophysics Data System (ADS)

Brightwell, Graham; Fairthorne, Marianne; Luczak, Malwina J.

2018-04-01

In the supermarket model, there are n queues, each with a single server. Customers arrive in a Poisson process with arrival rate λ n , where λ = λ (n) \\in (0,1) . Upon arrival, a customer selects d=d(n) servers uniformly at random, and joins the queue of a least-loaded server amongst those chosen. Service times are independent exponentially distributed random variables with mean 1. In this paper, we analyse the behaviour of the supermarket model in the regime where λ (n) = 1 - n^{-α } and d(n) = \\lfloor n^β \\rfloor , where α and β are fixed numbers in (0, 1]. For suitable pairs (α , β ) , our results imply that, in equilibrium, with probability tending to 1 as n → ∞, the proportion of queues with length equal to k = \\lceil α /β \\rceil is at least 1-2n^{-α + (k-1)β } , and there are no longer queues. We further show that the process is rapidly mixing when started in a good state, and give bounds on the speed of mixing for more general initial conditions.

SOFTWARE DESIGN FOR REAL-TIME SYSTEMS.

DTIC Science & Technology

Real-time computer systems and real-time computations are defined for the purposes of this report. The design of software for real - time systems is...discussed, employing the concept that all real - time systems belong to one of two types. The types are classified according to the type of control...program used; namely: Pre-assigned Iterative Cycle and Real-time Queueing. The two types of real - time systems are described in general, with supplemental

Transient queue-size distribution in a finite-capacity queueing system with server breakdowns and Bernoulli feedback

NASA Astrophysics Data System (ADS)

Kempa, Wojciech M.

2017-12-01

A finite-capacity queueing system with server breakdowns is investigated, in which successive exponentially distributed failure-free times are followed by repair periods. After the processing a customer may either rejoin the queue (feedback) with probability q, or definitely leave the system with probability 1 - q. The system of integral equations for transient queue-size distribution, conditioned by the initial level of buffer saturation, is build. The solution of the corresponding system written for Laplace transforms is found using the linear algebraic approach. The considered queueing system can be successfully used in modelling production lines with machine failures, in which the parameter q may be considered as a typical fraction of items demanding corrections. Morever, this queueing model can be applied in the analysis of real TCP/IP performance, where q stands for the fraction of packets requiring retransmission.

Online matching with queueing dynamics.

DOT National Transportation Integrated Search

2016-12-01

We consider a variant of the multiarmed bandit problem where jobs queue for service, and service rates of different servers may be unknown. We study algorithms that minimize queue-regret: the (expected) difference between the queue-lengths obtained b...

Accelerating list management for MPI.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hemmert, K. Scott; Rodrigues, Arun F.; Underwood, Keith Douglas

2005-07-01

The latency and throughput of MPI messages are critically important to a range of parallel scientific applications. In many modern networks, both of these performance characteristics are largely driven by the performance of a processor on the network interface. Because of the semantics of MPI, this embedded processor is forced to traverse a linked list of posted receives each time a message is received. As this list grows long, the latency of message reception grows and the throughput of MPI messages decreases. This paper presents a novel hardware feature to handle list management functions on a network interface. By movingmore » functions such as list insertion, list traversal, and list deletion to the hardware unit, latencies are decreased by up to 20% in the zero length queue case with dramatic improvements in the presence of long queues. Similarly, the throughput is increased by up to 10% in the zero length queue case and by nearly 100% in the presence queues of 30 messages.« less

Field test implementation of queue control : final report.

DOT National Transportation Integrated Search

2011-12-01

A major challenge for implementing queue control has been to accurately estimate on-ramp queue lengths, particularly during saturated onramp : conditions, when the vehicle queue extends around or beyond the ramp entrance. The main outcome of the rese...

A robust fractional-order PID controller design based on active queue management for TCP network

NASA Astrophysics Data System (ADS)

Hamidian, Hamideh; Beheshti, Mohammad T. H.

2018-01-01

In this paper, a robust fractional-order controller is designed to control the congestion in transmission control protocol (TCP) networks with time-varying parameters. Fractional controllers can increase the stability and robustness. Regardless of advantages of fractional controllers, they are still not common in congestion control in TCP networks. The network parameters are time-varying, so the robust stability is important in congestion controller design. Therefore, we focused on the robust controller design. The fractional PID controller is developed based on active queue management (AQM). D-partition technique is used. The most important property of designed controller is the robustness to the time-varying parameters of the TCP network. The vertex quasi-polynomials of the closed-loop characteristic equation are obtained, and the stability boundaries are calculated for each vertex quasi-polynomial. The intersection of all stability regions is insensitive to network parameter variations, and results in robust stability of TCP/AQM system. NS-2 simulations show that the proposed algorithm provides a stable queue length. Moreover, simulations show smaller oscillations of the queue length and less packet drop probability for FPID compared to PI and PID controllers. We can conclude from NS-2 simulations that the average packet loss probability variations are negligible when the network parameters change.

Safe and effective error rate monitors for SS7 signaling links

NASA Astrophysics Data System (ADS)

Schmidt, Douglas C.

1994-04-01

This paper describes SS7 error monitor characteristics, discusses the existing SUERM (Signal Unit Error Rate Monitor), and develops the recently proposed EIM (Error Interval Monitor) for higher speed SS7 links. A SS7 error monitor is considered safe if it ensures acceptable link quality and is considered effective if it is tolerant to short-term phenomena. Formal criteria for safe and effective error monitors are formulated in this paper. This paper develops models of changeover transients, the unstable component of queue length resulting from errors. These models are in the form of recursive digital filters. Time is divided into sequential intervals. The filter's input is the number of errors which have occurred in each interval. The output is the corresponding change in transmit queue length. Engineered EIM's are constructed by comparing an estimated changeover transient with a threshold T using a transient model modified to enforce SS7 standards. When this estimate exceeds T, a changeover will be initiated and the link will be removed from service. EIM's can be differentiated from SUERM by the fact that EIM's monitor errors over an interval while SUERM's count errored messages. EIM's offer several advantages over SUERM's, including the fact that they are safe and effective, impose uniform standards in link quality, are easily implemented, and make minimal use of real-time resources.

A method of operation scheduling based on video transcoding for cluster equipment

NASA Astrophysics Data System (ADS)

Zhou, Haojie; Yan, Chun

2018-04-01

Because of the cluster technology in real-time video transcoding device, the application of facing the massive growth in the number of video assignments and resolution and bit rate of diversity, task scheduling algorithm, and analyze the current mainstream of cluster for real-time video transcoding equipment characteristics of the cluster, combination with the characteristics of the cluster equipment task delay scheduling algorithm is proposed. This algorithm enables the cluster to get better performance in the generation of the job queue and the lower part of the job queue when receiving the operation instruction. In the end, a small real-time video transcode cluster is constructed to analyze the calculation ability, running time, resource occupation and other aspects of various algorithms in operation scheduling. The experimental results show that compared with traditional clustering task scheduling algorithm, task delay scheduling algorithm has more flexible and efficient characteristics.

A Mixed Integer Linear Program for Airport Departure Scheduling

NASA Technical Reports Server (NTRS)

Gupta, Gautam; Jung, Yoon Chul

2009-01-01

Aircraft departing from an airport are subject to numerous constraints while scheduling departure times. These constraints include wake-separation constraints for successive departures, miles-in-trail separation for aircraft bound for the same departure fixes, and time-window or prioritization constraints for individual flights. Besides these, emissions as well as increased fuel consumption due to inefficient scheduling need to be included. Addressing all the above constraints in a single framework while allowing for resequencing of the aircraft using runway queues is critical to the implementation of the Next Generation Air Transport System (NextGen) concepts. Prior work on airport departure scheduling has addressed some of the above. However, existing methods use pre-determined runway queues, and schedule aircraft from these departure queues. The source of such pre-determined queues is not explicit, and could potentially be a subjective controller input. Determining runway queues and scheduling within the same framework would potentially result in better scheduling. This paper presents a mixed integer linear program (MILP) for the departure-scheduling problem. The program takes as input the incoming sequence of aircraft for departure from a runway, along with their earliest departure times and an optional prioritization scheme based on time-window of departure for each aircraft. The program then assigns these aircraft to the available departure queues and schedules departure times, explicitly considering wake separation and departure fix restrictions to minimize total delay for all aircraft. The approach is generalized and can be used in a variety of situations, and allows for aircraft prioritization based on operational as well as environmental considerations. We present the MILP in the paper, along with benefits over the first-come-first-serve (FCFS) scheme for numerous randomized problems based on real-world settings. The MILP results in substantially reduced delays as compared to FCFS, and the magnitude of the savings depends on the queue and departure fix structure. The MILP assumes deterministic aircraft arrival times at the runway queues. However, due to taxi time uncertainty, aircraft might arrive either earlier or later than these deterministic times. Thus, to incorporate this uncertainty, we present a method for using the MILP with "overlap discounted rolling planning horizon". The approach is based on valuing near-term decision results more than future ones. We develop a model of taxitime uncertainty based on real-world data, and then compare the baseline FCFS delays with delays using the above MILP in a simple rolling-horizon method and in the overlap discounted scheme.

Parallel discrete event simulation: A shared memory approach

NASA Technical Reports Server (NTRS)

Reed, Daniel A.; Malony, Allen D.; Mccredie, Bradley D.

1987-01-01

With traditional event list techniques, evaluating a detailed discrete event simulation model can often require hours or even days of computation time. Parallel simulation mimics the interacting servers and queues of a real system by assigning each simulated entity to a processor. By eliminating the event list and maintaining only sufficient synchronization to insure causality, parallel simulation can potentially provide speedups that are linear in the number of processors. A set of shared memory experiments is presented using the Chandy-Misra distributed simulation algorithm to simulate networks of queues. Parameters include queueing network topology and routing probabilities, number of processors, and assignment of network nodes to processors. These experiments show that Chandy-Misra distributed simulation is a questionable alternative to sequential simulation of most queueing network models.

The Completion of Non-Steady-State Queue Model on The Queue System in Dr. Yap Eye Hospital Yogyakarta

NASA Astrophysics Data System (ADS)

Helmi Manggala Putri, Arum; Subekti, Retno; Binatari, Nikenasih

2017-06-01

Dr Yap Eye Hospital Yogyakarta is one of the most popular reference eye hospitals in Yogyakarta. There are so many patients coming from other cities and many of them are BPJS (Badan Penyelenggara Jaminan Sosial, Social Security Administrative Bodies) patients. Therefore, it causes numerous BPJS patients were in long queue at counter C of the registration section so that it needs to be analysed using queue system. Queue system analysis aims to give queue model overview and determine its effectiveness measure. The data collecting technique used in this research are by interview and observation. After getting the arrival data and the service data of BPJS patients per 5 minutes, the next steps are investigating steady-state condition, examining the Poisson distribution, determining queue models, and counting the effectiveness measure. Based on the result of data observation on Tuesday, February 16th, 2016, it shows that the queue system at counter C has (M/M/1):(GD/∞/∞) queue model. The analysis result in counter C shows that the queue system is a non-steady-state condition. Three ways to cope a non-steady-state problem on queue system are proposed in this research such as bounding the capacity of queue system, adding the servers, and doing Monte Carlo simulation. The queue system in counter C will reach steady-state if the capacity of patients is not more than 52 BPJS patients or adding one more server. By using Monte Carlo simulation, it shows that the effectiveness measure of the average waiting time for BPJS patients in counter C is 36 minutes 65 seconds. In addition, the average queue length of BPJS patients is 11 patients.

Queues on a Dynamically Evolving Graph

NASA Astrophysics Data System (ADS)

Mandjes, Michel; Starreveld, Nicos J.; Bekker, René

2018-04-01

This paper considers a population process on a dynamically evolving graph, which can be alternatively interpreted as a queueing network. The queues are of infinite-server type, entailing that at each node all customers present are served in parallel. The links that connect the queues have the special feature that they are unreliable, in the sense that their status alternates between `up' and `down'. If a link between two nodes is down, with a fixed probability each of the clients attempting to use that link is lost; otherwise the client remains at the origin node and reattempts using the link (and jumps to the destination node when it finds the link restored). For these networks we present the following results: (a) a system of coupled partial differential equations that describes the joint probability generating function corresponding to the queues' time-dependent behavior (and a system of ordinary differential equations for its stationary counterpart), (b) an algorithm to evaluate the (time-dependent and stationary) moments, and procedures to compute user-perceived performance measures which facilitate the quantification of the impact of the links' outages, (c) a diffusion limit for the joint queue length process. We include explicit results for a series relevant special cases, such as tandem networks and symmetric fully connected networks.

Green supply chain: Simulating road traffic congestion

NASA Astrophysics Data System (ADS)

Jalal, Muhammad Zulqarnain Hakim Abd; Nawawi, Mohd Kamal Mohd; Laailatul Hanim Mat Desa, Wan; Khalid, Ruzelan; Khalid Abduljabbar, Waleed; Ramli, Razamin

2017-09-01

With the increasing awareness of the consumers about environmental issues, businesses, households and governments increasingly want use green products and services which lead to green supply chain. This paper discusses a simulation study of a selected road traffic system that will contribute to the air pollution if in the congestion state. Road traffic congestion (RTC) can be caused by a temporary obstruction, a permanent capacity bottleneck in the network itself, and stochastic fluctuation in demand within a particular sector of the network, leading to spillback and queue propagation. A discrete-event simulation model is developed to represent the real traffic light control (TLC) system condition during peak hours. Certain performance measures such as average waiting time and queue length were measured using the simulation model. Existing system uses pre-set cycle time to control the light changes which is fixed time cycle. In this research, we test several other combination of pre-set cycle time with the objective to find the best system. In addition, we plan to use a combination of the pre-set cycle time and a proximity sensor which have the authority to manipulate the cycle time of the lights. The sensors work in such situation when the street seems to have less occupied vehicles, obviously it may not need a normal cycle for green light, and automatically change the cycle to street where vehicle is present.

Rapid production of optimal-quality reduced-resolution representations of very large databases

DOEpatents

Sigeti, David E.; Duchaineau, Mark; Miller, Mark C.; Wolinsky, Murray; Aldrich, Charles; Mineev-Weinstein, Mark B.

2001-01-01

View space representation data is produced in real time from a world space database representing terrain features. The world space database is first preprocessed. A database is formed having one element for each spatial region corresponding to a finest selected level of detail. A multiresolution database is then formed by merging elements and a strict error metric is computed for each element at each level of detail that is independent of parameters defining the view space. The multiresolution database and associated strict error metrics are then processed in real time for real time frame representations. View parameters for a view volume comprising a view location and field of view are selected. The error metric with the view parameters is converted to a view-dependent error metric. Elements with the coarsest resolution are chosen for an initial representation. Data set first elements from the initial representation data set are selected that are at least partially within the view volume. The first elements are placed in a split queue ordered by the value of the view-dependent error metric. If the number of first elements in the queue meets or exceeds a predetermined number of elements or whether the largest error metric is less than or equal to a selected upper error metric bound, the element at the head of the queue is force split and the resulting elements are inserted into the queue. Force splitting is continued until the determination is positive to form a first multiresolution set of elements. The first multiresolution set of elements is then outputted as reduced resolution view space data representing the terrain features.

Data Telemetry and Acquisition System for Acoustic Signal Processing Investigations.

DTIC Science & Technology

1996-02-20

were VME- based computer systems operating under the VxWorks real - time operating system . Each system shared a common hardware and software... real - time operating system . It interfaces to the Berg PCM Decommutator board, which searches for the embedded synchronization word in the data and re...software were built on top of this architecture. The multi-tasking, message queue and memory management facilities of the VxWorks real - time operating system are

Effective ergodicity breaking in an exclusion process with varying system length

NASA Astrophysics Data System (ADS)

Schultens, Christoph; Schadschneider, Andreas; Arita, Chikashi

2015-09-01

Stochastic processes of interacting particles in systems with varying length are relevant e.g. for several biological applications. We try to explore what kind of new physical effects one can expect in such systems. As an example, we extend the exclusive queueing process that can be viewed as a one-dimensional exclusion process with varying length, by introducing Langmuir kinetics. This process can be interpreted as an effective model for a queue that interacts with other queues by allowing incoming and leaving of customers in the bulk. We find surprising indications for breaking of ergodicity in a certain parameter regime, where the asymptotic growth behavior depends on the initial length. We show that a random walk with site-dependent hopping probabilities exhibits qualitatively the same behavior.

PWFQ: a priority-based weighted fair queueing algorithm for the downstream transmission of EPON

NASA Astrophysics Data System (ADS)

Xu, Sunjuan; Ye, Jiajun; Zou, Junni

2005-11-01

In the downstream direction of EPON, all ethernet frames share one downlink channel from the OLT to destination ONUs. To guarantee differentiated services, a scheduling algorithm is needed to solve the link-sharing issue. In this paper, we first review the classical WFQ algorithm and point out the shortcomings existing in the fair queueing principle of WFQ algorithm for EPON. Then we propose a novel scheduling algorithm called Priority-based WFQ (PWFQ) algorithm which distributes bandwidth based on priority. PWFQ algorithm can guarantee the quality of real-time services whether under light load or under heavy load. Simulation results also show that PWFQ algorithm not only can improve delay performance of real-time services, but can also meet the worst-case delay bound requirements.

Load sharing in distributed real-time systems with state-change broadcasts

NASA Technical Reports Server (NTRS)

Shin, Kang G.; Chang, Yi-Chieh

1989-01-01

A decentralized dynamic load-sharing (LS) method based on state-change broadcasts is proposed for a distributed real-time system. Whenever the state of a node changes from underloaded to fully loaded and vice versa, the node broadcasts this change to a set of nodes, called a buddy set, in the system. The performance of the method is evaluated with both analytic modeling and simulation. It is modeled first by an embedded Markov chain for which numerical solutions are derived. The model solutions are then used to calculate the distribution of queue lengths at the nodes and the probability of meeting task deadlines. The analytical results show that buddy sets of 10 nodes outperform those of less than 10 nodes, and the incremental benefit gained from increasing the buddy set size beyond 15 nodes is insignificant. These and other analytical results are verified by simulation. The proposed LS method is shown to meet task deadlines with a very high probability.

A STUDY OF SOME SOFTWARE PARAMETERS IN TIME-SHARING SYSTEMS.

DTIC Science & Technology

A review is made of some existing time-sharing computer systems and an exploration of various software characteristics is conducted. This...of the various parameters upon the average response cycle time, the average number in the queue awaiting service , the average length of time a user is

System and method for implementing periodic early discard in on-chip buffer memories of network elements

DOEpatents

Francini, Andrea

2013-05-14

An advance is made over the prior art in accordance with the principles of the present invention that is directed to a new approach for a system and method for a buffer management scheme called Periodic Early Discard (PED). The invention builds on the observation that, in presence of TCP traffic, the length of a queue can be stabilized by selection of an appropriate frequency for packet dropping. For any combination of number of TCP connections and distribution of the respective RTT values, there exists an ideal packet drop frequency that prevents the queue from over-flowing or under-flowing. While the value of the ideal packet drop frequency may quickly change over time and is sensitive to the series of TCP connections affected by past packet losses, and most of all is impossible to compute inline, it is possible to approximate it with a margin of error that allows keeping the queue occupancy within a pre-defined range for extended periods of time. The PED scheme aims at tracking the (unknown) ideal packet drop frequency, adjusting the approximated value based on the evolution of the queue occupancy, with corrections of the approximated packet drop frequency that occur at a timescale that is comparable to the aggregate time constant of the set of TCP connections that traverse the queue.

Fast simulation of packet loss rates in a shared buffer communications switch

NASA Technical Reports Server (NTRS)

Chang, Cheng-Shang; Heidelberger, Philip; Shahabuddin, Perwez

1993-01-01

This paper describes an efficient technique for estimating, via simulation, the probability of buffer overflows in a queueing model that arises in the analysis of ATM (Asynchronous Transfer Mode) communication switches. There are multiple streams of (autocorrelated) traffic feeding the switch that has a buffer of finite capacity. Each stream is designated as either being of high or low priority. When the queue length reaches a certain threshold, only high priority packets are admitted to the switch's buffer. The problem is to estimate the loss rate of high priority packets. An asymptotically optimal importance sampling approach is developed for this rare event simulation problem. In this approach, the importance sampling is done in two distinct phases. In the first phase, an importance sampling change of measure is used to bring the queue length up to the threshold at which low priority packets get rejected. In the second phase, a different importance sampling change of measure is used to move the queue length from the threshold to the buffer capacity.

Efficient Distribution of Triggered Synchronous Block Diagrams

DTIC Science & Technology

2011-10-21

corresponding FFP processes, from P to P ′. The sizes of the queues are as in [23]. In particular, if M is not Moore, a queue of size 1 suffices; ifM is Moore...computer systems. Real-Time Systems, 14(3):219–250, 1998. [23] S . Tripakis, C. Pinello, A . Benveniste, A . Sangiovanni-Vincent, P. Caspi, and M . Di...of connections: a data connection connects some output port of a block M to some input port of another block M ′; a trigger connection connects some

On-Line Scheduling of Parallel Machines

DTIC Science & Technology

1990-11-01

machine without losing any work; this is referred to as the preemptive model. In contrast to the nonpreemptive model which we have considered in this paper...that there exists no schedule of length d. The 2-relaxed decision procedure is as follows. Put each job into the queue of the slowest machine Mk such...in their queues . If a machine’s queue is empty it takes jobs to process from the queue of the first machine that is slower than it and that has a

Queueing analysis of a canonical model of real-time multiprocessors

NASA Technical Reports Server (NTRS)

Krishna, C. M.; Shin, K. G.

1983-01-01

A logical classification of multiprocessor structures from the point of view of control applications is presented. A computation of the response time distribution for a canonical model of a real time multiprocessor is presented. The multiprocessor is approximated by a blocking model. Two separate models are derived: one created from the system's point of view, and the other from the point of view of an incoming task.

Design and analysis of a model predictive controller for active queue management.

PubMed

Wang, Ping; Chen, Hong; Yang, Xiaoping; Ma, Yan

2012-01-01

Model predictive (MP) control as a novel active queue management (AQM) algorithm in dynamic computer networks is proposed. According to the predicted future queue length in the data buffer, early packets at the router are dropped reasonably by the MPAQM controller so that the queue length reaches the desired value with minimal tracking error. The drop probability is obtained by optimizing the network performance. Further, randomized algorithms are applied to analyze the robustness of MPAQM successfully, and also to provide the stability domain of systems with uncertain network parameters. The performances of MPAQM are evaluated through a series of simulations in NS2. The simulation results show that the MPAQM algorithm outperforms RED, PI, and REM algorithms in terms of stability, disturbance rejection, and robustness. Copyright © 2011 ISA. Published by Elsevier Ltd. All rights reserved.

Scheduling Policies for an Antiterrorist Surveillance System

DTIC Science & Technology

2008-06-27

times; for example, see Reiman and Wein [17] and Olsen [15]. For real-time scheduling problems involving impatient customers, see Gaver et al. [2...heavy traffic with throughput time constraints: Asymptotically optimal dynamic controls. Queueing Systems 39, 23–54. 30 [17] Reiman , M. I. and Wein

MODEL FOR INSTANTANEOUS RESIDENTIAL WATER DEMANDS

EPA Science Inventory

Residential wateer use is visualized as a customer-server interaction often encountered in queueing theory. Individual customers are assumed to arrive according to a nonhomogeneous Poisson process, then engage water servers for random lengths of time. Busy servers are assumed t...

Two tandem queues with general renewal input. 2: Asymptotic expansions for the diffusion model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knessl, C.; Tier, C.

1999-10-01

In Part 1 the authors formulated and solved a diffusion model for two tandem queues with exponential servers and general renewal arrivals. They thus obtained the easy traffic diffusion approximation to the steady state joint queue length distribution for this network. Here they study asymptotic and numerical properties of the diffusion approximation. In particular, analytical expressions are obtained for the tail probabilities. Both the joint distribution of the two queues and the marginal distribution of the second queue are considered. They also give numerical illustrations of how this marginal is affected by changes in the arrival and service processes.

Area-Efficient VLSI Computation.

DTIC Science & Technology

1981-10-01

to the bus of a computer system. 5 Table 1-2: Definition of the three- sorter . 7 Figure 1-3: A real-time systolic priority queue. 7 Figure 1-4: The...ca.pable of sorting three elements. The iree- sorter has three inputs X, Y, and Z and prduccs tlicc oitputs X’. Y’, and Z’ which are the miniumn, median. Mnd...in Section L4. Figure 1-3 shows how three- sorters are interconnected to make a systolic priority queue. In the figure, the outputs from the top. middle

Modeling and simulation of queuing system for customer service improvement: A case study

NASA Astrophysics Data System (ADS)

Xian, Tan Chai; Hong, Chai Weng; Hawari, Nurul Nazihah

2016-10-01

This study aims to develop a queuing model at UniMall by using discrete event simulation approach in analyzing the service performance that affects customer satisfaction. The performance measures that considered in this model are such as the average time in system, the total number of student served, the number of student in waiting queue, the waiting time in queue as well as the maximum length of buffer. ARENA simulation software is used to develop a simulation model and the output is analyzed. Based on the analysis of output, it is recommended that management of UniMall consider introducing shifts and adding another payment counter in the morning.

Design and Analysis of Scheduling Policies for Real-Time Computer Systems

DTIC Science & Technology

1992-01-01

C. M. Krishna, "The Impact of Workload on the Reliability of Real-Time Processor Triads," to appear in Micro . Rel. [17] J.F. Kurose, "Performance... Processor Triads", to appear in Micro . Rel. "* J.F. Kurose. "Performance Analysis of Minimum Laxity Scheduling in Discrete Time Queue- ing Systems", to...exponentially distributed service times and deadlines. A similar model was developed for the ED policy for a single processor system under identical

Control of Networked Traffic Flow Distribution - A Stochastic Distribution System Perspective

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Hong; Aziz, H M Abdul; Young, Stan

Networked traffic flow is a common scenario for urban transportation, where the distribution of vehicle queues either at controlled intersections or highway segments reflect the smoothness of the traffic flow in the network. At signalized intersections, the traffic queues are controlled by traffic signal control settings and effective traffic lights control would realize both smooth traffic flow and minimize fuel consumption. Funded by the Energy Efficient Mobility Systems (EEMS) program of the Vehicle Technologies Office of the US Department of Energy, we performed a preliminary investigation on the modelling and control framework in context of urban network of signalized intersections.more » In specific, we developed a recursive input-output traffic queueing models. The queue formation can be modeled as a stochastic process where the number of vehicles entering each intersection is a random number. Further, we proposed a preliminary B-Spline stochastic model for a one-way single-lane corridor traffic system based on theory of stochastic distribution control.. It has been shown that the developed stochastic model would provide the optimal probability density function (PDF) of the traffic queueing length as a dynamic function of the traffic signal setting parameters. Based upon such a stochastic distribution model, we have proposed a preliminary closed loop framework on stochastic distribution control for the traffic queueing system to make the traffic queueing length PDF follow a target PDF that potentially realizes the smooth traffic flow distribution in a concerned corridor.« less

Time studies in A&E departments--a useful tool for management.

PubMed

Aharonson-Daniel, L; Fung, H; Hedley, A J

1996-01-01

A time and motion study was conducted in an accident and emergency (A&E) department in a Hong Kong Government hospital in order to suggest solutions for severe queuing problems found in A&E. The study provided useful information about the patterns of arrival and service; the throughput; and the factors that influence the length of the queue at the A&E department. Plans for building a computerized simulation model were dropped as new intelligence generated by the study enabled problem solving using simple statistical analysis and common sense. Demonstrates some potential benefits for management in applying operations research methods in busy clinical working environments. The implementation of the recommendations made by this study successfully eliminated queues in A&E.

Using simulation in out-patient queues: a case study.

PubMed

Huarng, F; Lee, M H

1996-01-01

Overwork and overcrowding in some periods was an important issue for the out-patient department of a local hospital in Chia-Yi in Taiwan. The hospital administrators wanted to manage the patient flow effectively. Describes a study which focused on the utilization of doctors and staff in the out-patient department, the time spent in the hospital by an out-patient, and the length of the out-patient queue. Explains how a computer simulation model was developed to study how changes in the appointment system, staffing policies and service units would affect the observed bottleneck. The results show that the waiting time was greatly reduced and the workload of the doctor was also reduced to a reasonable rate in the overwork and overcrowding periods.

Active Queue Management Mechanisms for Real-Time Traffic in MANETs

DTIC Science & Technology

2001-12-01

characteristics do not change much over a short period of time, substituting indices and/or gains is possible. This study aims to provide general guidelines about... bpf for FEC and 1 bpf to provide future expansion(s) of the coder. Table 6. Federal Standard 1016 characteristics (After Ref. [37]). a...

Real association of factors with inappropriate hospital days.

PubMed

Huet, Bernard; Cauterman, Maxime

2005-01-01

Several studies of inappropriate (in the sense of the AEP) hospital days highlighted associations between two factors (rate of inappropriateness and reasons for inappropriateness, rate of inappropriateness and appropriate setting of care,..). The aim of this communication is to present a study on real associations, at constant factor, between five factors associated with hospital inappropriate days: medical management process, reason for inappropriateness, scheduled admission, rate of inappropriateness, length of stay. We used the European version of Appropriateness Evaluation Protocol for evaluation of inappropriate days and the French protocol ;for analysis of inappropriate days. The study set in three Parisian hospitals, four clinical departments, three specialities. 523 patients were included in the study, 5663 days were evaluated on a wide variety of pathologies: 27 Medical Management Processes. Results show that there are real associations (elimination of transitive associations) between five factors : medical management process and discharge processes, reason for inappropriateness, scheduled admission, rate of inappropriate days, length of stay. Multiple Correspondence Analysis on all "groups of contiguous days related with the same reason for inappropriateness" shows five profiles of queues integrating various medical management processes.

Using queuing theory and simulation model to optimize hospital pharmacy performance.

PubMed

Bahadori, Mohammadkarim; Mohammadnejhad, Seyed Mohsen; Ravangard, Ramin; Teymourzadeh, Ehsan

2014-03-01

Hospital pharmacy is responsible for controlling and monitoring the medication use process and ensures the timely access to safe, effective and economical use of drugs and medicines for patients and hospital staff. This study aimed to optimize the management of studied outpatient pharmacy by developing suitable queuing theory and simulation technique. A descriptive-analytical study conducted in a military hospital in Iran, Tehran in 2013. A sample of 220 patients referred to the outpatient pharmacy of the hospital in two shifts, morning and evening, was selected to collect the necessary data to determine the arrival rate, service rate, and other data needed to calculate the patients flow and queuing network performance variables. After the initial analysis of collected data using the software SPSS 18, the pharmacy queuing network performance indicators were calculated for both shifts. Then, based on collected data and to provide appropriate solutions, the queuing system of current situation for both shifts was modeled and simulated using the software ARENA 12 and 4 scenarios were explored. Results showed that the queue characteristics of the studied pharmacy during the situation analysis were very undesirable in both morning and evening shifts. The average numbers of patients in the pharmacy were 19.21 and 14.66 in the morning and evening, respectively. The average times spent in the system by clients were 39 minutes in the morning and 35 minutes in the evening. The system utilization in the morning and evening were, respectively, 25% and 21%. The simulation results showed that reducing the staff in the morning from 2 to 1 in the receiving prescriptions stage didn't change the queue performance indicators. Increasing one staff in filling prescription drugs could cause a decrease of 10 persons in the average queue length and 18 minutes and 14 seconds in the average waiting time. On the other hand, simulation results showed that in the evening, decreasing the staff from 2 to 1 in the delivery of prescription drugs, changed the queue performance indicators very little. Increasing a staff to fill prescription drugs could cause a decrease of 5 persons in the average queue length and 8 minutes and 44 seconds in the average waiting time. The patients' waiting times and the number of patients waiting to receive services in both shifts could be reduced by using multitasking persons and reallocating them to the time-consuming stage of filling prescriptions, using queuing theory and simulation techniques.

Using Queuing Theory and Simulation Model to Optimize Hospital Pharmacy Performance

PubMed Central

Bahadori, Mohammadkarim; Mohammadnejhad, Seyed Mohsen; Ravangard, Ramin; Teymourzadeh, Ehsan

2014-01-01

Background: Hospital pharmacy is responsible for controlling and monitoring the medication use process and ensures the timely access to safe, effective and economical use of drugs and medicines for patients and hospital staff. Objectives: This study aimed to optimize the management of studied outpatient pharmacy by developing suitable queuing theory and simulation technique. Patients and Methods: A descriptive-analytical study conducted in a military hospital in Iran, Tehran in 2013. A sample of 220 patients referred to the outpatient pharmacy of the hospital in two shifts, morning and evening, was selected to collect the necessary data to determine the arrival rate, service rate, and other data needed to calculate the patients flow and queuing network performance variables. After the initial analysis of collected data using the software SPSS 18, the pharmacy queuing network performance indicators were calculated for both shifts. Then, based on collected data and to provide appropriate solutions, the queuing system of current situation for both shifts was modeled and simulated using the software ARENA 12 and 4 scenarios were explored. Results: Results showed that the queue characteristics of the studied pharmacy during the situation analysis were very undesirable in both morning and evening shifts. The average numbers of patients in the pharmacy were 19.21 and 14.66 in the morning and evening, respectively. The average times spent in the system by clients were 39 minutes in the morning and 35 minutes in the evening. The system utilization in the morning and evening were, respectively, 25% and 21%. The simulation results showed that reducing the staff in the morning from 2 to 1 in the receiving prescriptions stage didn't change the queue performance indicators. Increasing one staff in filling prescription drugs could cause a decrease of 10 persons in the average queue length and 18 minutes and 14 seconds in the average waiting time. On the other hand, simulation results showed that in the evening, decreasing the staff from 2 to 1 in the delivery of prescription drugs, changed the queue performance indicators very little. Increasing a staff to fill prescription drugs could cause a decrease of 5 persons in the average queue length and 8 minutes and 44 seconds in the average waiting time. Conclusions: The patients' waiting times and the number of patients waiting to receive services in both shifts could be reduced by using multitasking persons and reallocating them to the time-consuming stage of filling prescriptions, using queuing theory and simulation techniques. PMID:24829791

Crowd evacuation model based on bacterial foraging algorithm

NASA Astrophysics Data System (ADS)

Shibiao, Mu; Zhijun, Chen

To understand crowd evacuation, a model based on a bacterial foraging algorithm (BFA) is proposed in this paper. Considering dynamic and static factors, the probability of pedestrian movement is established using cellular automata. In addition, given walking and queue times, a target optimization function is built. At the same time, a BFA is used to optimize the objective function. Finally, through real and simulation experiments, the relationship between the parameters of evacuation time, exit width, pedestrian density, and average evacuation speed is analyzed. The results show that the model can effectively describe a real evacuation.

Improvements in multimedia data buffering using master/slave architecture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheikh, S.; Ganesan, R.

1996-12-31

Advances in the networking technology and multimedia technology has necessitated a need for multimedia servers to be robust and reliable. Existing solutions have direct limitations such as I/O bottleneck and reliability of data retrieval. The system can store the stream of incoming data if enough buffer space is available or the mass storage is clearing the buffer data faster than queue input. A single buffer queue is not sufficient to handle the large frames. Queue sizes are normally several megabytes in length and thus in turn will introduce a state of overflow. The system should also keep track of themore » rewind, fast forwarding, and pause requests, otherwise queue management will become intricate. In this paper, we present a master/slave (server that is designated to monitor the workflow of the complete system. This server holds every other information of slaves by maintaining a dynamic table. It also controls the workload on each of the systems by redistributing request to others or handles the request by itself) approach which will overcome the limitations of today`s storage and also satisfy tomorrow`s storage needs. This approach will maintain the system reliability and yield faster response by using more storage units in parallel. A network of master/slave can handle many requests and synchronize them at all times. Using dedicated CPU and a common pool of queues we explain how queues can be controlled and buffer overflow can be avoided. We propose a layered approach to the buffering problem and provide a read-ahead solution to ensure continuous storage and retrieval of multimedia data.« less

X-LUNA: Extending Free/Open Source Real Time Executive for On-Board Space Applications

NASA Astrophysics Data System (ADS)

Braga, P.; Henriques, L.; Zulianello, M.

2008-08-01

In this paper we present xLuna, a system based on the RTEMS [1] Real-Time Operating System that is able to run on demand a GNU/Linux Operating System [2] as RTEMS' lowest priority task. Linux runs in user-mode and in a different memory partition. This allows running Hard Real-Time tasks and Linux applications on the same system sharing the Hardware resources while keeping a safe isolation and the Real-Time characteristics of RTEMS. Communication between both Systems is possible through a loose coupled mechanism based on message queues. Currently only SPARC LEON2 processor with Memory Management Unit (MMU) is supported. The advantage in having two isolated systems is that non critical components are quickly developed or simply ported reducing time-to-market and budget.

An agent-based model for queue formation of powered two-wheelers in heterogeneous traffic

NASA Astrophysics Data System (ADS)

Lee, Tzu-Chang; Wong, K. I.

2016-11-01

This paper presents an agent-based model (ABM) for simulating the queue formation of powered two-wheelers (PTWs) in heterogeneous traffic at a signalized intersection. The main novelty is that the proposed interaction rule describing the position choice behavior of PTWs when queuing in heterogeneous traffic can capture the stochastic nature of the decision making process. The interaction rule is formulated as a multinomial logit model, which is calibrated by using a microscopic traffic trajectory dataset obtained from video footage. The ABM is validated against the survey data for the vehicular trajectory patterns, queuing patterns, queue lengths, and discharge rates. The results demonstrate that the proposed model is capable of replicating the observed queue formation process for heterogeneous traffic.

Kin competition within groups: the offspring depreciation hypothesis.

PubMed Central

Ridley, J; Sutherland, W J

2002-01-01

Where relatives compete for the same resources (kin competition) and each obtains an equal share, this can favour the evolution of elevated dispersal rates, such that most resource competition is among non-relatives. We show that this effect evaporates as among-sibling dominance increases to the point where the allocation of resources is maximally unequal. We restore a kin-competition effect on emigration rates from dominance-ranked family groups by showing that where siblings form queues to inherit the breeding positions, the length of the queue affects the fitness of all individuals by depreciating the rank of subsequent offspring. Incorporating this 'offspring depreciation' effect decreases optimal queue lengths, increases dispersal rates and explains the otherwise paradoxical use of sinks by cooperatively breeding birds in stable environments. The offspring depreciation effect also favours the evolution of small, but consistent, clutch sizes and high reproductive skew, but constrains the evolution of alloparenting. PMID:12573070

Kin competition within groups: the offspring depreciation hypothesis.

PubMed

Ridley, J; Sutherland, W J

2002-12-22

Where relatives compete for the same resources (kin competition) and each obtains an equal share, this can favour the evolution of elevated dispersal rates, such that most resource competition is among non-relatives. We show that this effect evaporates as among-sibling dominance increases to the point where the allocation of resources is maximally unequal. We restore a kin-competition effect on emigration rates from dominance-ranked family groups by showing that where siblings form queues to inherit the breeding positions, the length of the queue affects the fitness of all individuals by depreciating the rank of subsequent offspring. Incorporating this 'offspring depreciation' effect decreases optimal queue lengths, increases dispersal rates and explains the otherwise paradoxical use of sinks by cooperatively breeding birds in stable environments. The offspring depreciation effect also favours the evolution of small, but consistent, clutch sizes and high reproductive skew, but constrains the evolution of alloparenting.

A generic method for evaluating crowding in the emergency department.

PubMed

Eiset, Andreas Halgreen; Erlandsen, Mogens; Møllekær, Anders Brøns; Mackenhauer, Julie; Kirkegaard, Hans

2016-06-14

Crowding in the emergency department (ED) has been studied intensively using complicated non-generic methods that may prove difficult to implement in a clinical setting. This study sought to develop a generic method to describe and analyse crowding from measurements readily available in the ED and to test the developed method empirically in a clinical setting. We conceptualised a model with ED patient flow divided into separate queues identified by timestamps for predetermined events. With temporal resolution of 30 min, queue lengths were computed as Q(t + 1) = Q(t) + A(t) - D(t), with A(t) = number of arrivals, D(t) = number of departures and t = time interval. Maximum queue lengths for each shift of each day were found and risks of crowding computed. All tests were performed using non-parametric methods. The method was applied in the ED of Aarhus University Hospital, Denmark utilising an open cohort design with prospectively collected data from a one-year observation period. By employing the timestamps already assigned to the patients while in the ED, a generic queuing model can be computed from which crowding can be described and analysed in detail. Depending on availability of data, the model can be extended to include several queues increasing the level of information. When applying the method empirically, 41,693 patients were included. The studied ED had a high risk of bed occupancy rising above 100 % during day and evening shift, especially on weekdays. Further, a 'carry over' effect was shown between shifts and days. The presented method offers an easy and generic way to get detailed insight into the dynamics of crowding in an ED.

A new traffic control design method for large networks with signalized intersections

NASA Technical Reports Server (NTRS)

Leininger, G. G.; Colony, D. C.; Seldner, K.

1979-01-01

The paper presents a traffic control design technique for application to large traffic networks with signalized intersections. It is shown that the design method adopts a macroscopic viewpoint to establish a new traffic modelling procedure in which vehicle platoons are subdivided into main stream queues and turning queues. Optimization of the signal splits minimizes queue lengths in the steady state condition and improves traffic flow conditions, from the viewpoint of the traveling public. Finally, an application of the design method to a traffic network with thirty-three signalized intersections is used to demonstrate the effectiveness of the proposed technique.

Generalized priority-queue network dynamics: Impact of team and hierarchy

NASA Astrophysics Data System (ADS)

Cho, Won-Kuk; Min, Byungjoon; Goh, K.-I.; Kim, I.-M.

2010-06-01

We study the effect of team and hierarchy on the waiting-time dynamics of priority-queue networks. To this end, we introduce generalized priority-queue network models incorporating interaction rules based on team-execution and hierarchy in decision making, respectively. It is numerically found that the waiting-time distribution exhibits a power law for long waiting times in both cases, yet with different exponents depending on the team size and the position of queue nodes in the hierarchy, respectively. The observed power-law behaviors have in many cases a corresponding single or pairwise-interacting queue dynamics, suggesting that the pairwise interaction may constitute a major dynamic consequence in the priority-queue networks. It is also found that the reciprocity of influence is a relevant factor for the priority-queue network dynamics.

Decentralized Real-Time Scheduling

DTIC Science & Technology

1990-08-01

must provide several alternative resource management policies, including FIFO and deadline queueing for shared resources that are not available. 5...When demand exceeds the supply of shared resources (even within a single switch), some calls cannot be completed. In that case, a call’s priority...associated chiefly with the need to manage resources in a timely and decentralized fashion. The Alpha programming model permits the convenient expression of

QoS mapping algorithm for ETE QoS provisioning

NASA Astrophysics Data System (ADS)

Wu, Jian J.; Foster, Gerry

2002-08-01

End-to-End (ETE) Quality of Service (QoS) is critical for next generation wireless multimedia communication systems. To meet the ETE QoS requirements, Universal Mobile Telecommunication System (UMTS) requires not only meeting the 3GPP QoS requirements [1-2] but also mapping external network QoS classes to UMTS QoS classes. There are four Quality of Services (QoS) classes in UMTS; they are Conversational, Streaming, Interactive and Background. There are eight QoS classes for LAN in IEEE 802.1 (one reserved). ATM has four QoS categories. They are Constant Bit Rate (CBR) - highest priority, short queue for strict Cell Delay Variation (CDV), Variable Bit Rate (VBR) - second highest priority, short queues for real time, longer queues for non-real time, Guaranteed Frame Rate (GFR)/ Unspecified Bit Rate (UBR) with Minimum Desired Cell Rate (MDCR) - intermediate priority, dependent on service provider UBR/ Available Bit Rate (ABR) - lowest priority, long queues, large delay variation. DiffServ (DS) has six-bit DS codepoint (DSCP) available to determine the datagram's priority relative to other datagrams and therefore, up to 64 QoS classes are available from the IPv4 and IPv6 DSCP. Different organisations have tried to solve the QoS issues from their own perspective. However, none of them has a full picture for end-to-end QoS classes and how to map them among all QoS classes. Therefore, a universal QoS needs to be created and a new set of QoS classes to enable end-to-end (ETE) QoS provisioning is required. In this paper, a new set of ETE QoS classes is proposed and a mappings algorithm for different QoS classes that are proposed by different organisations is given. With our proposal, ETE QoS mapping and control can be implemented.

British Columbia sends patients to Seattle for coronary artery surgery. Bypassing the queue in Canada.

PubMed

Katz, S J; Mizgala, H F; Welch, H G

1991-08-28

Concern about waiting lists for elective procedures has become a highly visible challenge to the universal health insurance program in Canada. In response to lengthening queues for patients waiting for cardiac surgery, British Columbia made contracts with four Seattle hospitals to send a total of 200 patients for coronary artery bypass surgery. This article examines the cause of the queue for cardiac surgery in British Columbia and the events that led to outside contracting. Global hospital budgets and restrictions on capital expansion have limited hospital capacity for cardiac surgery. This constrained supply, combined with periodic shortages in critical care nurses and cardiac perfusion technologists, has resulted in a rapid increase in the waiting list. Reducing wide variations in the lengths of queues for individual surgeons may afford an opportunity to reduce long waits. While the patient queue for cardiac surgery has sparked a public debate about budget limits and health care needs, its clinical impact remains uncertain.

Left-Turn Bays

DOT National Transportation Integrated Search

1996-05-01

The topic of left-turn bays (left-turn lanes) involves the following three issues: 1.) Warrants; 2.) Bay Length and 3.) Design Details. This discussion paper deals with warrants and bay length -- including queue storage at signalized and unsignalized...

Queueing system analysis of multi server model at XYZ insurance company in Tasikmalaya city

NASA Astrophysics Data System (ADS)

Muhajir, Ahmad; Binatari, Nikenasih

2017-08-01

Queueing theory or waiting line theory is a theory that deals with the queue process from the customer comes, queue to be served, served and left on service facilities. Queue occurs because of a mismatch between the numbers of customers that will be served with the available number of services, as an example at XYZ insurance company in Tasikmalaya. This research aims to determine the characteristics of the queue system which then to optimize the number of server in term of total cost. The result shows that the queue model can be represented by (M/M/4):(GD/∞/∞), where the arrivals are Poisson distributed while the service time is following exponential distribution. The probability of idle customer service is 2,39% of the working time, the average number of customer in the queue is 3 customers, the average number of customer in a system is 6 customers, the average time of a customer spent in the queue is 15,9979 minutes, the average time a customer spends in the system is 34,4141 minutes, and the average number of busy customer servicer is 3 server. The optimized number of customer service is 5 servers, and the operational cost has minimum cost at Rp 4.323.

Time Is Not on Our Side: How Radiology Practices Should Manage Customer Queues.

PubMed

Loving, Vilert A; Ellis, Richard L; Rippee, Robert; Steele, Joseph R; Schomer, Donald F; Shoemaker, Stowe

2017-11-01

As health care shifts toward patient-centered care, wait times have received increasing scrutiny as an important metric for patient satisfaction. Long queues form when radiology practices inefficiently service their customers, leading to customer dissatisfaction and a lower perception of value. This article describes a four-step framework for radiology practices to resolve problematic queues: (1) analyze factors contributing to queue formation; (2) improve processes to reduce service times; (3) reduce variability; (4) address the psychology of queues. Copyright © 2017 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Adaptive Aggregation Routing to Reduce Delay for Multi-Layer Wireless Sensor Networks.

PubMed

Li, Xujing; Liu, Anfeng; Xie, Mande; Xiong, Neal N; Zeng, Zhiwen; Cai, Zhiping

2018-04-16

The quality of service (QoS) regarding delay, lifetime and reliability is the key to the application of wireless sensor networks (WSNs). Data aggregation is a method to effectively reduce the data transmission volume and improve the lifetime of a network. In the previous study, a common strategy required that data wait in the queue. When the length of the queue is greater than or equal to the predetermined aggregation threshold ( N t ) or the waiting time is equal to the aggregation timer ( T t ), data are forwarded at the expense of an increase in the delay. The primary contributions of the proposed Adaptive Aggregation Routing (AAR) scheme are the following: (a) the senders select the forwarding node dynamically according to the length of the data queue, which effectively reduces the delay. In the AAR scheme, the senders send data to the nodes with a long data queue. The advantages are that first, the nodes with a long data queue need a small amount of data to perform aggregation; therefore, the transmitted data can be fully utilized to make these nodes aggregate. Second, this scheme balances the aggregating and data sending load; thus, the lifetime increases. (b) An improved AAR scheme is proposed to improve the QoS. The aggregation deadline ( T t ) and the aggregation threshold ( N t ) are dynamically changed in the network. In WSNs, nodes far from the sink have residual energy because these nodes transmit less data than the other nodes. In the improved AAR scheme, the nodes far from the sink have a small value of T t and N t to reduce delay, and the nodes near the sink are set to a large value of T t and N t to reduce energy consumption. Thus, the end to end delay is reduced, a longer lifetime is achieved, and the residual energy is fully used. Simulation results demonstrate that compared with the previous scheme, the performance of the AAR scheme is improved. This scheme reduces the delay by 14.91%, improves the lifetime by 30.91%, and increases energy efficiency by 76.40%.

Adaptive Aggregation Routing to Reduce Delay for Multi-Layer Wireless Sensor Networks

PubMed Central

Li, Xujing; Xie, Mande; Zeng, Zhiwen; Cai, Zhiping

2018-01-01

The quality of service (QoS) regarding delay, lifetime and reliability is the key to the application of wireless sensor networks (WSNs). Data aggregation is a method to effectively reduce the data transmission volume and improve the lifetime of a network. In the previous study, a common strategy required that data wait in the queue. When the length of the queue is greater than or equal to the predetermined aggregation threshold (Nt) or the waiting time is equal to the aggregation timer (Tt), data are forwarded at the expense of an increase in the delay. The primary contributions of the proposed Adaptive Aggregation Routing (AAR) scheme are the following: (a) the senders select the forwarding node dynamically according to the length of the data queue, which effectively reduces the delay. In the AAR scheme, the senders send data to the nodes with a long data queue. The advantages are that first, the nodes with a long data queue need a small amount of data to perform aggregation; therefore, the transmitted data can be fully utilized to make these nodes aggregate. Second, this scheme balances the aggregating and data sending load; thus, the lifetime increases. (b) An improved AAR scheme is proposed to improve the QoS. The aggregation deadline (Tt) and the aggregation threshold (Nt) are dynamically changed in the network. In WSNs, nodes far from the sink have residual energy because these nodes transmit less data than the other nodes. In the improved AAR scheme, the nodes far from the sink have a small value of Tt and Nt to reduce delay, and the nodes near the sink are set to a large value of Tt and Nt to reduce energy consumption. Thus, the end to end delay is reduced, a longer lifetime is achieved, and the residual energy is fully used. Simulation results demonstrate that compared with the previous scheme, the performance of the AAR scheme is improved. This scheme reduces the delay by 14.91%, improves the lifetime by 30.91%, and increases energy efficiency by 76.40%. PMID:29659535

A Cellular Neural Networks Based DiffServ Switch for Satellite Communication Systems

NASA Astrophysics Data System (ADS)

Tarchi, Daniele; Fantacci, Romano; Gubellini, Roberto; Pecorella, Tommaso

2003-07-01

Recent developments of Internet services and advanced compression methods has revived interest on IP based multimedia satellite communication systems. However a main problem arising here is to guarantee specific Quality of Service (QoS) constraints in order to have good performance for each traffic class.Among various QoS approach used in Internet, recently the DiffServ technique has became the most promising so- lution, mainly for its simplicity with respect to different alternatives. Moreover, in satellite communication systems, DiffServ policy computational capabilities are placed at the edge points (end-to-end philosophy); this is very important for a network constituted by one satellite link because it allows to reduce the implementation complexity of the satellite on-board equipments.The satellite switch under consideration makes use of the Multiple Input Queuing approach. Packets arrived at a switch input are stored in a shared buffer but they are logically ordered in individual queues, one for each possible output link. According to the DiffServ policy, within a same logical queue, packets are reordered in individual sub-queues according to the priority. A suitable implementation of the DiffServ policy based on a Cellular Neural Network (CNN) is proposed in the paper in order to achieve QoS requirements.The CNNs are a set of linear and nonlinear circuits connected among them that allow parallel and asynchronous computation. CNNs are a class of neural networks similar to Hopfield Neural Networks (HNN), but more flexible and suitable for solving the output contention problem, inherent of switching systems, for VLSI implementation.In this paper a CNN has been designed in order to maximize a cost functional, related to the on-board switch through- put and QoS constraints. The initial state for each neural cell is obtained looking at the presence of at least one packet from a certain input logical queue to a specific output line. The input value for each neural cell is a function of priority and length of each input logical queue. The versatility of neural network make feasible to take the best decision for the packet to be delivered to each output satellite beam, in order to meet specific QoS constraints. Numerical results for CNN approach highlights that Neural network convergence within a time slot is guaranteed, and an optimal, or at least near-optimal, solution in terms of cost function is achieved.The proposed system is based on the IETF (Internet Engineering Task Force) recommendations; this means that traffic entering the switching fabric could be marked as Expedited Forward (EF) or Assured Forward (AF), otherwise handled as Best Effort (BE). Two Assured Forward classes with different emission priority have been implemented, taking into account time spent inside the logical queue and its length. Expedited Forward traffic is typical of services to be delivered with the maximum priority, as streaming or interactive services. The packets, belonging to services that need a certain level of priority with low packet loss, are marked as Assured Forward. Best Effort traffic is related to e-mail or file transfer, or other that have not particular QoS requirements. The CNN used to solve conflict situations act as an arbiter for all the output links. Differently from other Multiple Input Queuing approach, where one arbiter for each output line is present, in proposed approach there exist only one arbiter that make the best decision. The selected rule has been defined in order to give priority to packets, according to opportunely defined functionals characteristic of each traffic class, under the constraint that no more than one packet can be delivered to the same output line. The functionals depend on queue length and time spent inside the queue by front packet.The performance of the proposed DiffServ switch has been derived in terms of delay and jitter; buffer occupancy has been analyzed for different configuration, such as a unique common buffer, one buffer for each input line, one buffer for each input line and each priority class.The obtained results highlight an high flexibility of satellite switch with CNN, taking into account that functional used to calculate priority of each queue could be easily changed, without any complexity gain nor change in CNN structure, in order to consider different traffic characteristic. Numerical results show that proposed algorithm outperform the switches based on Multiple Input Queuing, that use strictly priority methods, in terms of delay and jitter. Different buffer size have been also considered in order to analyze packet loss for CNN switch algorithm, comparing different configuration described above.The good behavior of the proposed DiffServ switch has been verified in the case of traffic with pareto distribution for packet length and a geometrical distribution for packet interarrival time, highlighting good performance in terms of delay and jitter. Numerical results also demonstrate the stability of this method for heavy load traffic; in particular maximum permitted load is higher for higher priority classes.

Optimal control of M/M/1 two-phase queueing system with state-dependent arrival rate, server breakdowns, delayed repair, and N-policy

NASA Astrophysics Data System (ADS)

Rao, Hanumantha; Kumar, Vasanta; Srinivasa Rao, T.; Srinivasa Kumar, B.

2018-04-01

In this paper, we examine a two-stage queueing system where the arrivals are Poisson with rate depends on the condition of the server to be specific: vacation, pre-service, operational or breakdown state. The service station is liable to breakdowns and deferral in repair because of non-accessibility of the repair facility. The service is in two basic stages, the first being bulk service to every one of the customers holding up on the line and the second stage is individual to each of them. The server works under N-policy. The server needs preliminary time (startup time) to begin batch service after a vacation period. Startup times, uninterrupted service times, the length of each vacation period, delay times and service times follows an exponential distribution. The closed form of expressions for the mean system size at different conditions of the server is determined. Numerical investigations are directed to concentrate the impact of the system parameters on the ideal limit N and the minimum base expected unit cost.

Study on queueing behavior in pedestrian evacuation by extended cellular automata model

NASA Astrophysics Data System (ADS)

Hu, Jun; You, Lei; Zhang, Hong; Wei, Juan; Guo, Yangyong

2018-01-01

This paper proposes a pedestrian evacuation model for effective simulation of evacuation efficiency based on extended cellular automata. In the model, pedestrians' momentary transition probability to a target position is defined in terms of the floor field and queueing time, and the critical time is defined as the waiting time threshold in a queue. Queueing time and critical time are derived using Fractal Brownian Motion through analysis of pedestrian arrival characteristics. Simulations using the platform and actual evacuations were conducted to study the relationships among system evacuation time, average system velocity, pedestrian density, flow rate, and critical time. The results demonstrate that at low pedestrian density, evacuation efficiency can be improved through adoption of the shortest route strategy, and critical time has an inverse relationship with average system velocity. Conversely, at higher pedestrian densities, it is better to adopt the shortest queueing time strategy, and critical time is inversely related to flow rate.

An Adaptive Property-Aware HW/SW Framework for DDDAS

DTIC Science & Technology

2014-10-21

sleep queue stores sleeping tasks until their activation time. The task with the earliest activation time is at the front of the sleep queue. At the...queue) or activation time ( sleep queue). Chetan et al. / Procedia Computer Science 00 (2012) 1–9 4 Figure 2: A high level architecture diagram of the...conservative will be the WCET estimation. Vestal et al. suggested the use of Audesly’s prioirity assignment scheme [6] and period transformation technique

Scheduling Algorithms for Maximizing Throughput with Zero-Forcing Beamforming in a MIMO Wireless System

NASA Astrophysics Data System (ADS)

Foronda, Augusto; Ohta, Chikara; Tamaki, Hisashi

Dirty paper coding (DPC) is a strategy to achieve the region capacity of multiple input multiple output (MIMO) downlink channels and a DPC scheduler is throughput optimal if users are selected according to their queue states and current rates. However, DPC is difficult to implement in practical systems. One solution, zero-forcing beamforming (ZFBF) strategy has been proposed to achieve the same asymptotic sum rate capacity as that of DPC with an exhaustive search over the entire user set. Some suboptimal user group selection schedulers with reduced complexity based on ZFBF strategy (ZFBF-SUS) and proportional fair (PF) scheduling algorithm (PF-ZFBF) have also been proposed to enhance the throughput and fairness among the users, respectively. However, they are not throughput optimal, fairness and throughput decrease if each user queue length is different due to different users channel quality. Therefore, we propose two different scheduling algorithms: a throughput optimal scheduling algorithm (ZFBF-TO) and a reduced complexity scheduling algorithm (ZFBF-RC). Both are based on ZFBF strategy and, at every time slot, the scheduling algorithms have to select some users based on user channel quality, user queue length and orthogonality among users. Moreover, the proposed algorithms have to produce the rate allocation and power allocation for the selected users based on a modified water filling method. We analyze the schedulers complexity and numerical results show that ZFBF-RC provides throughput and fairness improvements compared to the ZFBF-SUS and PF-ZFBF scheduling algorithms.

Capacity analysis of a bypass of roundabouts

NASA Astrophysics Data System (ADS)

Sedlačik, Ivan; Slabý, Petr

2017-09-01

The capacity of the roads network mainly depends on the capacity of its nodal points - intersections. A connecting branch or a bypass is a lane or lanes inserted between two adjacent branches of a roundabout, providing redirection of vehicles, that would otherwise burden a circular lane. A bypass effect to the capacity of roundabouts, but also other types of level intersections, is undeniable. A connecting branch increases the total capacity of an intersection that takes a part of vehicles performing a manoeuver of the first right turn completely out of an intersection area. Redirecting vehicles reduces delay times at intersections and reduces queues at the entrance to an intersection. Bypasses improve the quality of transport. Limiting for the capacity of bypasses is the point of disconnection from the entrance into the roundabout and the connection point into the exit from the roundabout. Central parts of the bypasses have minimal effects on the capacity. The length of a bypass has to match with the maximum length of a queue of waiting vehicles at a given intensity level. The article deals with analysis of the bypass capacity at the roundabouts.

Application of queueing models to multiprogrammed computer systems operating in a time-critical environment

NASA Technical Reports Server (NTRS)

Eckhardt, D. E., Jr.

1979-01-01

A model of a central processor (CPU) which services background applications in the presence of time critical activity is presented. The CPU is viewed as an M/M/1 queueing system subject to periodic interrupts by deterministic, time critical process. The Laplace transform of the distribution of service times for the background applications is developed. The use of state of the art queueing models for studying the background processing capability of time critical computer systems is discussed and the results of a model validation study which support this application of queueing models are presented.

Energy-saving EPON Bandwidth Allocation Algorithm Supporting ONU's Sleep Mode

NASA Astrophysics Data System (ADS)

Zhang, Yinfa; Ren, Shuai; Liao, Xiaomin; Fang, Yuanyuan

2014-09-01

A new bandwidth allocation algorithm was presented by combining merits of the IPACT algorithm and the cyclic DBA algorithm based on the DBA algorithm for ONU's sleep mode. Simulation results indicate that compared with the normal mode ONU, the ONU's sleep mode can save about 74% of energy. The new algorithm has a smaller average packet delay and queue length in the upstream direction. While in the downstream direction, the average packet delay of the new algorithm is less than polling cycle Tcycle and the average queue length is less than the product of Tcycle and the maximum link rate. The new algorithm achieves a better compromise between energy-saving and ensuring quality of service.

Peregrine Queue Changes | High-Performance Computing | NREL

Science.gov Websites

that the best path is to disable the large queue and move the nodes from the "large" queue to jobs that request a large number of nodes. The large queue was disabled during the October System time

The research and realization of multi-platform real-time message-oriented middleware in large-scale air traffic control system

NASA Astrophysics Data System (ADS)

Liang, Haijun; Ren, Jialong; Song, Tao

2017-05-01

Operating requirement of air traffic control system, the multi-platform real-time message-oriented middleware was studied and realized, which is composed of CDCC and CDCS. The former provides application process interface, while the latter realizes data synchronism of CDCC and data exchange. MQM, as one important part of it, provides message queue management and, encrypt and compress data during transmitting procedure. The practical system application verifies that the middleware can simplify the development of air traffic control system, enhance its stability, improve its systematic function and make it convenient for maintenance and reuse.

RFID-based information visibility for hospital operations: exploring its positive effects using discrete event simulation.

PubMed

Asamoah, Daniel A; Sharda, Ramesh; Rude, Howard N; Doran, Derek

2016-10-12

Long queues and wait times often occur at hospitals and affect smooth delivery of health services. To improve hospital operations, prior studies have developed scheduling techniques to minimize patient wait times. However, these studies lack in demonstrating how such techniques respond to real-time information needs of hospitals and efficiently manage wait times. This article presents a multi-method study on the positive impact of providing real-time scheduling information to patients using the RFID technology. Using a simulation methodology, we present a generic scenario, which can be mapped to real-life situations, where patients can select the order of laboratory services. The study shows that information visibility offered by RFID technology results in decreased wait times and improves resource utilization. We also discuss the applicability of the results based on field interviews granted by hospital clinicians and administrators on the perceived barriers and benefits of an RFID system.

Application of Queueing Theory to the Analysis of Changes in Outpatients' Waiting Times in Hospitals Introducing EMR

PubMed Central

Cho, Kyoung Won; Kim, Seong Min; Chae, Young Moon

2017-01-01

Objectives This research used queueing theory to analyze changes in outpatients' waiting times before and after the introduction of Electronic Medical Record (EMR) systems. Methods We focused on the exact drawing of two fundamental parameters for queueing analysis, arrival rate (λ) and service rate (µ), from digital data to apply queueing theory to the analysis of outpatients' waiting times. We used outpatients' reception times and consultation finish times to calculate the arrival and service rates, respectively. Results Using queueing theory, we could calculate waiting time excluding distorted values from the digital data and distortion factors, such as arrival before the hospital open time, which occurs frequently in the initial stage of a queueing system. We analyzed changes in outpatients' waiting times before and after the introduction of EMR using the methodology proposed in this paper, and found that the outpatients' waiting time decreases after the introduction of EMR. More specifically, the outpatients' waiting times in the target public hospitals have decreased by rates in the range between 44% and 78%. Conclusions It is possible to analyze waiting times while minimizing input errors and limitations influencing consultation procedures if we use digital data and apply the queueing theory. Our results verify that the introduction of EMR contributes to the improvement of patient services by decreasing outpatients' waiting time, or by increasing efficiency. It is also expected that our methodology or its expansion could contribute to the improvement of hospital service by assisting the identification and resolution of bottlenecks in the outpatient consultation process. PMID:28261529

Application of Queueing Theory to the Analysis of Changes in Outpatients' Waiting Times in Hospitals Introducing EMR.

PubMed

Cho, Kyoung Won; Kim, Seong Min; Chae, Young Moon; Song, Yong Uk

2017-01-01

This research used queueing theory to analyze changes in outpatients' waiting times before and after the introduction of Electronic Medical Record (EMR) systems. We focused on the exact drawing of two fundamental parameters for queueing analysis, arrival rate (λ) and service rate (µ), from digital data to apply queueing theory to the analysis of outpatients' waiting times. We used outpatients' reception times and consultation finish times to calculate the arrival and service rates, respectively. Using queueing theory, we could calculate waiting time excluding distorted values from the digital data and distortion factors, such as arrival before the hospital open time, which occurs frequently in the initial stage of a queueing system. We analyzed changes in outpatients' waiting times before and after the introduction of EMR using the methodology proposed in this paper, and found that the outpatients' waiting time decreases after the introduction of EMR. More specifically, the outpatients' waiting times in the target public hospitals have decreased by rates in the range between 44% and 78%. It is possible to analyze waiting times while minimizing input errors and limitations influencing consultation procedures if we use digital data and apply the queueing theory. Our results verify that the introduction of EMR contributes to the improvement of patient services by decreasing outpatients' waiting time, or by increasing efficiency. It is also expected that our methodology or its expansion could contribute to the improvement of hospital service by assisting the identification and resolution of bottlenecks in the outpatient consultation process.

A real-time traffic control method for the intersection with pre-signals under the phase swap sorting strategy

PubMed Central

Bie, Yiming; Wang, Yinhai

2017-01-01

To deal with the conflicts between left-turn and through traffic streams and increase the discharge capacity, this paper addresses the pre-signal which is implemented at a signalized intersection. Such an intersection with pre-signal is termed as a tandem intersection. For the tandem intersection, phase swap sorting strategy is deemed as the most effective phasing scheme in view of some exclusive merits, such as easier compliance of drivers, and shorter sorting area. However, a major limitation of the phase swap sorting strategy is not considered in previous studies: if one or more vehicle is left at the sorting area after the signal light turns to red, the capacity of the approach would be dramatically dropped. Besides, previous signal control studies deal with a fixed timing plan that is not adaptive with the fluctuation of traffic flows. Therefore, to cope with these two gaps, this paper firstly takes an in-depth analysis of the traffic flow operations at the tandem intersection. Secondly, three groups of loop detectors are placed to obtain the real-time vehicle information for adaptive signalization. The lane selection behavior in the sorting area is considered to set the green time for intersection signals. With the objective of minimizing the vehicle delay, the signal control parameters are then optimized based on a dynamic programming method. Finally, numerical experiments show that average vehicle delay and maximum queue length can be reduced under all scenarios. PMID:28531198

A real-time traffic control method for the intersection with pre-signals under the phase swap sorting strategy.

PubMed

Bie, Yiming; Liu, Zhiyuan; Wang, Yinhai

2017-01-01

To deal with the conflicts between left-turn and through traffic streams and increase the discharge capacity, this paper addresses the pre-signal which is implemented at a signalized intersection. Such an intersection with pre-signal is termed as a tandem intersection. For the tandem intersection, phase swap sorting strategy is deemed as the most effective phasing scheme in view of some exclusive merits, such as easier compliance of drivers, and shorter sorting area. However, a major limitation of the phase swap sorting strategy is not considered in previous studies: if one or more vehicle is left at the sorting area after the signal light turns to red, the capacity of the approach would be dramatically dropped. Besides, previous signal control studies deal with a fixed timing plan that is not adaptive with the fluctuation of traffic flows. Therefore, to cope with these two gaps, this paper firstly takes an in-depth analysis of the traffic flow operations at the tandem intersection. Secondly, three groups of loop detectors are placed to obtain the real-time vehicle information for adaptive signalization. The lane selection behavior in the sorting area is considered to set the green time for intersection signals. With the objective of minimizing the vehicle delay, the signal control parameters are then optimized based on a dynamic programming method. Finally, numerical experiments show that average vehicle delay and maximum queue length can be reduced under all scenarios.

Nursing home queues and home health users.

PubMed

Swan, J H; Benjamin, A E

1993-01-01

Home health market growth suggests the need for models explaining home health utilization. We have previously explained state-level Medicare home health visits with reference to nursing home markets. Here we introduce a model whereby state-level Medicare home health use is a function of nursing home queues and other demand and supply factors. Medicare home health users per state population is negatively related to nursing home bed stock, positively to Medicaid eligibility levels and to Medicaid nursing home recipients per population, as well as to various other demand and supply measures. This explanation of home health users explains previously-reported findings for home health visits. The findings support the argument that home health use is explained by factors affecting lengths of nursing home queues.

Empirical synchronized flow in oversaturated city traffic.

PubMed

Kerner, Boris S; Hemmerle, Peter; Koller, Micha; Hermanns, Gerhard; Klenov, Sergey L; Rehborn, Hubert; Schreckenberg, Michael

2014-09-01

Based on a study of anonymized GPS probe vehicle traces measured by personal navigation devices in vehicles randomly distributed in city traffic, empirical synchronized flow in oversaturated city traffic has been revealed. It turns out that real oversaturated city traffic resulting from speed breakdown in a city in most cases can be considered random spatiotemporal alternations between sequences of moving queues and synchronized flow patterns in which the moving queues do not occur.

Mentat/A: Medium grain parallel processing

NASA Technical Reports Server (NTRS)

Grimshaw, Andrew S.

1992-01-01

The objective of this project is to test the Algorithm to Architecture Mapping Model (ATAMM) firing rules using the Mentat run-time system and the Mentat Programming Language (MPL). A special version of Mentat, Mentat/A (Mentat/ATAMM) was constructed. This required changes to: (1) modify the run-time system to control queue length and inhibit actor firing until required data tokens are available and space is available in the input queues of all of the direct descendent actors; (2) disallow the specification of persistent object classes in the MPL; and (3) permit only decision free graphs in the MPL. We were successful in implementing the spirit of the plan, although some goals changed as we came to better understand the problem. We report on what we accomplished and the lessons we learned. The Mentat/A run-time system is discussed, and we briefly present the compiler. We present results for three applications and conclude with a summary and some observations. Appendix A contains a list of technical reports and published papers partially supported by the grant. Appendix B contains listings for the three applications.

Fairness in the coronary angiography queue.

PubMed

Alter, D A; Basinski, A S; Cohen, E A; Naylor, C D

1999-10-05

Since waiting lists for coronary angiography are generally managed without explicit queuing criteria, patients may not receive priority on the basis of clinical acuity. The objective of this study was to examine clinical and nonclinical determinants of the length of time patients wait for coronary angiography. In this single-centre prospective cohort study conducted in the autumn of 1997, 357 consecutive patients were followed from initial triage until a coronary angiography was performed or an adverse cardiac event occurred. The referring physicians' hospital affiliation (physicians at Sunnybrook & Women's College Health Sciences Centre, those who practice at another centre but perform angiography at Sunnybrook and those with no previous association with Sunnybrook) was used to compare processes of care. A clinical urgency rating scale was used to assign a recommended maximum waiting time (RMWT) to each patient retrospectively, but this was not used in the queuing process. RMWTs and actual waiting times for patients in the 3 referral groups were compared; the influence clinical and nonclinical variables had on the actual length of time patients waited for coronary angiography was assessed; and possible predictors of adverse events were examined. Of 357 patients referred to Sunnybrook, 22 (6.2%) experienced adverse events while in the queue. Among those who remained, 308 (91.9%) were in need of coronary angiography; 201 (60.0%) of those patients received one within the RMWT. The length of time to angiography was influenced by clinical characteristics similar to those specified on the urgency rating scale, leading to a moderate agreement between actual waiting times and RMWTs (kappa = 0.53). However, physician affiliation was a highly significant (p < 0.001) and independent predictor of waiting time. Whereas 45.6% of the variation in waiting time was explained by all clinical factors combined, 9.3% of the variation was explained by physician affiliation alone. Informal queuing practices for coronary angiography do reflect clinical acuity, but they are also influenced by nonclinical factors, such as the nature of the physicians' association with the catheterization facility.

A robust and high-performance queue management controller for large round trip time networks

NASA Astrophysics Data System (ADS)

Khoshnevisan, Ladan; Salmasi, Farzad R.

2016-05-01

Congestion management for transmission control protocol is of utmost importance to prevent packet loss within a network. This necessitates strategies for active queue management. The most applied active queue management strategies have their inherent disadvantages which lead to suboptimal performance and even instability in the case of large round trip time and/or external disturbance. This paper presents an internal model control robust queue management scheme with two degrees of freedom in order to restrict the undesired effects of large and small round trip time and parameter variations in the queue management. Conventional approaches such as proportional integral and random early detection procedures lead to unstable behaviour due to large delay. Moreover, internal model control-Smith scheme suffers from large oscillations due to the large round trip time. On the other hand, other schemes such as internal model control-proportional integral and derivative show excessive sluggish performance for small round trip time values. To overcome these shortcomings, we introduce a system entailing two individual controllers for queue management and disturbance rejection, simultaneously. Simulation results based on Matlab/Simulink and also Network Simulator 2 (NS2) demonstrate the effectiveness of the procedure and verify the analytical approach.

Process modeling of emergency department patient flow: effect of patient length of stay on ED diversion.

PubMed

Kolker, Alexander

2008-10-01

A discreet event simulation methodology has been used to establish a quantitative relationship between Emergency Department (ED) performance characteristics, such as percent of time on ambulance diversion and the number of patients in queue in the waiting room, and the upper limits of patient length of stay (LOS). A simulation process model of ED patient flow has been developed that took into account a significant difference between LOS distributions of patients discharged home and patients admitted into the hospital. Using simulation model it has been identified that ED diversion could be negligible (less than approximately 0.5%) if patients discharged home stay in ED not more than 5 h, and patients admitted into the hospital stay in ED not more than 6 h Using full factorial design of experiments with two factors and the model's predicted percent diversion as a response function, other combinations of LOS upper limits have been determined that would result in low ED percent diversion as well. It has also been determined that if the number of patients exceeds 11 in queue in ED waiting room then the diversion percent is rapidly increasing.

About influence of input rate random part of nonstationary queue system on statistical estimates of its macroscopic indicators

NASA Astrophysics Data System (ADS)

Korelin, Ivan A.; Porshnev, Sergey V.

2018-05-01

A model of the non-stationary queuing system (NQS) is described. The input of this model receives a flow of requests with input rate λ = λdet (t) + λrnd (t), where λdet (t) is a deterministic function depending on time; λrnd (t) is a random function. The parameters of functions λdet (t), λrnd (t) were identified on the basis of statistical information on visitor flows collected from various Russian football stadiums. The statistical modeling of NQS is carried out and the average statistical dependences are obtained: the length of the queue of requests waiting for service, the average wait time for the service, the number of visitors entered to the stadium on the time. It is shown that these dependencies can be characterized by the following parameters: the number of visitors who entered at the time of the match; time required to service all incoming visitors; the maximum value; the argument value when the studied dependence reaches its maximum value. The dependences of these parameters on the energy ratio of the deterministic and random component of the input rate are investigated.

Evaluation of DOTD's Existing Queue Estimation Procedures : Research Project Capsule

DOT National Transportation Integrated Search

2017-10-01

The primary objective of this study is to evaluate the effectiveness of DOTDs queue estimation procedures by comparing results with those obtained directly from site observations through video camera footage or other means. Actual queue start time...

Cost Comparison of B-1B Non-Mission-Capable Drivers Using Finite Source Queueing with Spares

DTIC Science & Technology

2012-09-06

COMPARISON OF B-1B NON-MISSION-CAPABLE DRIVERS USING FINITE SOURCE QUEUEING WITH SPARES GRADUATE RESEARCH PAPER Presented to the Faculty...step into the lineup making large-number approximations unusable. Instead, a finite source queueing model including spares is incorporated...were reported as flying time accrued since last occurrence. Service time was given in both start-stop format and MX man-hours utilized. Service time was

Distributed Continuous Event-Based Data Acquisition Using the IEEE 1588 Synchronization and FlexRIO FPGA

NASA Astrophysics Data System (ADS)

Taliercio, C.; Luchetta, A.; Manduchi, G.; Rigoni, A.

2017-07-01

High-speed event driven acquisition is normally performed by analog-to-digital converter (ADC) boards with a given number of pretrigger sample and posttrigger sample that are recorded upon the occurrence of a hardware trigger. A direct physical connection is, therefore, required between the source of event (trigger) and the ADC, because any other software-based communication method would introduce a delay in triggering that would turn out to be not acceptable in many cases. This paper proposes a solution for the relaxation of the event communication time that can be, in this case, carried out by software messaging (e.g., via an LAN), provided that the system components are synchronized in time using the IEEE 1588 synchronization mechanism. The information about the exact event occurrence time is contained in the software packet that is sent to communicate the event and is used by the ADC FPGA to identify the exact sample in the ADC sample queue. The length of the ADC sample queue will depend on the maximum delay in software event message communication time. A prototype implementation using a National FlexRIO FPGA board connected with an ADC device is presented as the proof of concept.

Remote Observing and Automatic FTP on Kitt Peak

NASA Astrophysics Data System (ADS)

Seaman, Rob; Bohannan, Bruce

As part of KPNO's Internet-based observing services we experimented with the publically available audio, video and whiteboard MBONE clients (vat, nv, wb and others) in both point-to-point and multicast modes. While bandwidth is always a constraint on the Internet, it is less of a constraint to operations than many might think. These experiments were part of two new Internet-based observing services offered to KPNO observers beginning with the Fall 1995 semester: a remote observing station and an automatic FTP data queue. The remote observing station seeks to duplicate the KPNO IRAF/ICE observing environment on a workstation at the observer's home institution. The automatic FTP queue is intended to support those observing programs that require quick transport of data back to the home institution, for instance, for near real time reductions to aid in observing tactics. We also discuss the early operational results of these services.

How to report and monitor the performance of waiting list management.

PubMed

Torkki, Markus; Linna, Miika; Seitsalo, Seppo; Paavolainen, Pekka

2002-01-01

Potential problems concerning waiting list management are often monitored using mean waiting times based on empirical samples. However, the appropriateness of mean waiting time as an indicator of access can be questioned if a waiting list is not managed well, e.g., if the queue discipline is violated. This study was performed to find out about the queue discipline in waiting lists for elective surgery to reveal potential discrepancies in waiting list management. There were 1,774 waiting list patients for hallux valgus or varicose vein surgery or sterilization. The waiting time distributions of patients receiving surgery and of patients still waiting for an operation are presented in column charts. The charts are compared with two model charts. One model chart presents a high queue discipline (first in-first out) and another a poor queue discipline (random) queue. There were significant differences in waiting list management across hospitals and patient categories. Examples of a poor queue discipline were found in queues for hallux valgus and varicose vein operations. A routine waiting list reporting should be used to guarantee the quality of waiting list management and to pinpoint potential problems in access. It is important to monitor not only the number of patients in the waiting list but also the queue discipline and the balance between demand and supply of surgical services. The purpose for this type of reporting is to ensure that the priority setting made at health policy level also works in practise.

Simple Queueing Model Applied to the City of Portland

NASA Astrophysics Data System (ADS)

Simon, Patrice M.; Esser, Jörg; Nagel, Kai

We use a simple traffic micro-simulation model based on queueing dynamics as introduced by Gawron [IJMPC, 9(3):393, 1998] in order to simulate traffic in Portland/Oregon. Links have a flow capacity, that is, they do not release more vehicles per second than is possible according to their capacity. This leads to queue built-up if demand exceeds capacity. Links also have a storage capacity, which means that once a link is full, vehicles that want to enter the link need to wait. This leads to queue spill-back through the network. The model is compatible with route-plan-based approaches such as TRANSIMS, where each vehicle attempts to follow its pre-computed path. Yet, both the data requirements and the computational requirements are considerably lower than for the full TRANSIMS microsimulation. Indeed, the model uses standard emme/2 network data, and runs about eight times faster than real time with more than 100 000 vehicles simultaneously in the simulation on a single Pentium-type CPU. We derive the model's fundamental diagrams and explain it. The simulation is used to simulate traffic on the emme/2 network of the Portland (Oregon) metropolitan region (20 000 links). Demand is generated by a simplified home-to-work destination assignment which generates about half a million trips for the morning peak. Route assignment is done by iterative feedback between micro-simulation and router. An iterative solution of the route assignment for the above problem can be achieved within about half a day of computing time on a desktop workstation. We compare results with field data and with results of traditional assignment runs by the Portland Metropolitan Planning Organization. Thus, with a model such as this one, it is possible to use a dynamic, activities-based approach to transportation simulation (such as in TRANSIMS) with affordable data and hardware. This should enable systematic research about the coupling of demand generation, route assignment, and micro-simulation output.

A Simulation Model Of A Picture Archival And Communication System

NASA Astrophysics Data System (ADS)

D'Silva, Vijay; Perros, Harry; Stockbridge, Chris

1988-06-01

A PACS architecture was simulated to quantify its performance. The model consisted of reading stations, acquisition nodes, communication links, a database management system, and a storage system consisting of magnetic and optical disks. Two levels of storage were simulated, a high-speed magnetic disk system for short term storage, and optical disk jukeboxes for long term storage. The communications link was a single bus via which image data were requested and delivered. Real input data to the simulation model were obtained from surveys of radiology procedures (Bowman Gray School of Medicine). From these the following inputs were calculated: - the size of short term storage necessary - the amount of long term storage required - the frequency of access of each store, and - the distribution of the number of films requested per diagnosis. The performance measures obtained were - the mean retrieval time for an image, - mean queue lengths, and - the utilization of each device. Parametric analysis was done for - the bus speed, - the packet size for the communications link, - the record size on the magnetic disk, - compression ratio, - influx of new images, - DBMS time, and - diagnosis think times. Plots give the optimum values for those values of input speed and device performance which are sufficient to achieve subsecond image retrieval times

Modeling left turn queue lengths.

DOT National Transportation Integrated Search

2011-01-01

This guidebook provides methodologies and procedures for using incident data collected at Texas transportation management centers (TMCs) to perform two types of analysis - evaluation/planning analysis and predictive analysis. For the evaluation/plann...

The Sojourn Time in a Three Node, Acyclic, Jackson Queueing Network.

DTIC Science & Technology

1982-01-27

Effect of Intermediate Storage on Production Lines with Dependent Machines, Robert D. Foley and Petcharat Chansaenwilai 8015 Some Conditions for the...Queues, Robert D. Foley 8105 Reversibility of Production Lines with Dependent Machines, Petcharat Chansaenwilai 1 8106 Queues with Delayed Feedback, Robert

Method and apparatus for efficiently tracking queue entries relative to a timestamp

DOEpatents

Blumrich, Matthias A.; Chen, Dong; Gara, Alan G.; Giampapa, Mark E.; Heidelberger, Philip; Ohmacht, Martin; Salapura, Velentina; Vranas, Pavlos

2014-06-17

An apparatus and method for tracking coherence event signals transmitted in a multiprocessor system. The apparatus comprises a coherence logic unit, each unit having a plurality of queue structures with each queue structure associated with a respective sender of event signals transmitted in the system. A timing circuit associated with a queue structure controls enqueuing and dequeuing of received coherence event signals, and, a counter tracks a number of coherence event signals remaining enqueued in the queue structure and dequeued since receipt of a timestamp signal. A counter mechanism generates an output signal indicating that all of the coherence event signals present in the queue structure at the time of receipt of the timestamp signal have been dequeued. In one embodiment, the timestamp signal is asserted at the start of a memory synchronization operation and, the output signal indicates that all coherence events present when the timestamp signal was asserted have completed. This signal can then be used as part of the completion condition for the memory synchronization operation.

The evaluation of a formalized queue management system for coronary angiography waiting lists.

PubMed

Alter, D A; Newman, Alice M; Cohen, Eric A; Sykora, Kathy; Tu, Jack V

2005-11-01

Lengthy waiting lists for coronary angiography have been described in many health care systems worldwide. The extent to which formal queue management systems may improve the prioritization and survival of patients in the angiography queue is unknown. To prospectively evaluate the performance of a formal queue management system for patients awaiting coronary angiography in Ontario. The coronary angiography urgency scale, a formal queue management system developed in 1993 using a modified Delphi panel, allocates recommended maximum waiting times (RMWTs) in accordance with clinical necessity. By using a provincial clinical registry, 35,617 consecutive patients referred into the coronary angiography queue between April 1, 2001, and March 31, 2002, were prospectively tracked. Cox proportional hazards models were used to examined mortality risk across urgency after adjusting for additional clinical and comorbid factors. Good agreement was determined in urgency ratings between scores from the coronary angiography urgency scale and implicit physician judgement, which was obtained independently at the time of the index referral (weighted kappa = 0.49). The overall mortality in the queue was 0.3% (0.47%, 0.26% and 0.13% for urgent, semiurgent and elective patients, respectively). Urgency, as specified by the coronary angiography urgency scale, was the strongest predictor of death in the queue (P<0.001). However, when patients were censored according to their RMWTs, mortality was similar across different levels of urgency. Consequently, up to 18.5 deaths per 10,000 patients could have potentially been averted had patients been triaged and undergone coronary angiography within the RMWT as specified by the coronary angiography urgency scale. The incorporation of the coronary angiography urgency scale as a formal queue management system may decrease mortality in the coronary angiography queue. The authors recommend its implementation in health care systems where patients experience excessive waiting time delays for coronary angiography.

A computerized traffic control algorithm to determine optimal traffic signal settings. Ph.D. Thesis - Toledo Univ.

NASA Technical Reports Server (NTRS)

Seldner, K.

1977-01-01

An algorithm was developed to optimally control the traffic signals at each intersection using a discrete time traffic model applicable to heavy or peak traffic. Off line optimization procedures were applied to compute the cycle splits required to minimize the lengths of the vehicle queues and delay at each intersection. The method was applied to an extensive traffic network in Toledo, Ohio. Results obtained with the derived optimal settings are compared with the control settings presently in use.

Propagation speed of a starting wave in a queue of pedestrians.

PubMed

Tomoeda, Akiyasu; Yanagisawa, Daichi; Imamura, Takashi; Nishinari, Katsuhiro

2012-09-01

The propagation speed of a starting wave, which is a wave of people's successive reactions in the relaxation process of a queue, has an essential role for pedestrians and vehicles to achieve smooth movement. For example, a queue of vehicles with appropriate headway (or density) alleviates traffic jams since the delay of reaction to start is minimized. In this paper, we have investigated the fundamental relation between the propagation speed of a starting wave and the initial density by both our mathematical model built on the stochastic cellular automata and experimental measurements. Analysis of our mathematical model implies that the relation is characterized by the power law αρ-β (β≠1), and the experimental results verify this feature. Moreover, when the starting wave is characterized by the power law (β>1), we have revealed the existence of optimal density, where the required time, i.e., the sum of the waiting time until the starting wave reaches the last pedestrian in a queue and his/her travel time to pass the head position of the initial queue, is minimized. This optimal density inevitably plays a significant role in achieving a smooth movement of crowds and vehicles in a queue.

Big data learning and suggestions in modern apps

NASA Astrophysics Data System (ADS)

Sharma, G.; Nadesh, R. K.; ArivuSelvan, K.

2017-11-01

Among many other tasks involved for emergent location-based applications such as those involved in prescribing touring places and those focused on publicizing based on destination, destination prediction is vital. Dealing with destination prediction involves determining the probability of a location (destination) depending on historical trajectories. In this paper, a destination prediction based on probabilistic model (Machine Learning Model) feed-forward neural networks will be presented, which will work by making the observation of driver’s habits. Some individuals drive to same locations such as work involving same route every day of the working week. Here, streaming of real-time driving data will be sent through Kafka queue in apache storm for real-time processing and finally storing the data in MongoDB.

Scheduling and control strategies for the departure problem in air traffic control

NASA Astrophysics Data System (ADS)

Bolender, Michael Alan

Two problems relating to the departure problem in air traffic control automation are examined. The first problem that is addressed is the scheduling of aircraft for departure. The departure operations at a major US hub airport are analyzed, and a discrete event simulation of the departure operations is constructed. Specifically, the case where there is a single departure runway is considered. The runway is fed by two queues of aircraft. Each queue, in turn, is fed by a single taxiway. Two salient areas regarding scheduling are addressed. The first is the construction of optimal departure sequences for the aircraft that are queued. Several greedy search algorithms are designed to minimize the total time to depart a set of queued aircraft. Each algorithm has a different set of heuristic rules to resolve situations within the search space whenever two branches of the search tree with equal edge costs are encountered. These algorithms are then compared and contrasted with a genetic search algorithm in order to assess the performance of the heuristics. This is done in the context of a static departure problem where the length of the departure queue is fixed. A greedy algorithm which deepens the search whenever two branches of the search tree with non-unique costs are encountered is shown to outperform the other heuristic algorithms. This search strategy is then implemented in the discrete event simulation. A baseline performance level is established, and a sensitivity analysis is performed by implementing changes in traffic mix, routing, and miles-in-trail restrictions for comparison. It is concluded that to minimize the average time spent in the queue for different traffic conditions, a queue assignment algorithm is needed to maintain an even balance of aircraft in the queues. A necessary consideration is to base queue assignment upon traffic management restrictions such as miles-in-trail constraints. The second problem addresses the technical challenges associated with merging departure aircraft onto their filed routes in a congested airspace environment. Conflicts between departures and en route aircraft within the Center airspace are analyzed. Speed control, holding the aircraft; at an intermediate altitude, re-routing, and vectoring are posed as possible deconfliction maneuvers. A cost assessment of these merge strategies, which are based upon 4D fight management and conflict detection and resolution principles, is given. Several merge conflicts are studied and a cost for each resolution is computed. It is shown that vectoring tends to be the most expensive resolution technique. Altitude hold is simple, costs less than vectoring, but may require a long time for the aircraft to achieve separation. Re-routing is the simplest, and provides the most cost benefit since the aircraft flies a shorter distance than if it had followed its filed route. Speed control is shown to be ineffective as a means of increasing separation, but is effective for maintaining separation between aircraft. In addition, the affects of uncertainties on the cost are assessed. The analysis shows that cost is invariant with the decision time.

Predicting clinical image delivery time by monitoring PACS queue behavior.

PubMed

King, Nelson E; Documet, Jorge; Liu, Brent

2006-01-01

The expectation of rapid image retrieval from PACS users contributes to increased information technology (IT) infrastructure investments to increase performance as well as continuing demands upon PACS administrators to respond to "slow" system performance. The ability to provide predicted delivery times to a PACS user may curb user expectations for "fastest" response especially during peak hours. This, in turn, could result in a PACS infrastructure tailored to more realistic performance demands. A PACS with a stand-alone architecture under peak load typically holds study requests in a queue until the DICOM C-Move command can take place. We investigate the contents of a stand-alone architecture PACS RetrieveSend queue and identified parameters and behaviors that enable a more accurate prediction of delivery time. A prediction algorithm for studies delayed in a stand-alone PACS queue can be extendible to other potential bottlenecks such as long-term storage archives. Implications of a queue monitor in other PACS architectures are also discussed.

Waiting for coronary angiography: is there a clinically ordered queue?

PubMed

Hemingway, H; Crook, A M; Feder, G; Dawson, J R; Timmis, A

2000-03-18

Among over 3000 patients undergoing coronary angiography in the absence of a formal queue-management system, we found that a-priori urgency scores were strongly associated with waiting times, prevalence of coronary-artery disease, rate of revascularisation, and mortality. These data challenge the widely held assumption that such waiting lists are not clinically ordered; however, the wide variation in waiting times within urgency categories suggests the need for further improvements in clinical queueing.

Do case-generic measures of queue performance for bypass surgery accurately reflect the waiting-list experiences of those most urgent?

PubMed

Burstein, Jason; Lee, Douglas S; Alter, David A

2006-02-01

Queue performance is typically assessed using generic measures, which capture the queue in aggregate. The objective of this study was to examine whether case-generic measures of queue performance appropriately reflected the waiting-list experiences of those patients with greatest disease severity. We examined the queue for isolated coronary artery bypass grafting (CABG) in Ontario between April 1993 and March 2000 using data obtained from the Cardiac Care Network. Our primary measure of queue performance was the proportion of patients who received their bypass surgery within their recommended maximum waiting times (%RMWTs) in any given month. We compared case-generic measures of queue performance to case-specific measures of queue performance stratified by urgency level. The queue was largely comprised of elective cases ranging from 73% (1993) to 57%(1999). Urgent patients comprised the minority of the queue ranging from 14% (1993) to 20% (1999). Case-generic month-to-month variations in the percentage of cases completed within RMWTs (an aggregated waiting list measure encompassing the characteristics of all patients in the queue) closely resembled the experiences of elective patients (R2 = 0.81), but conversely, bore little relationship to the waiting-list experiences of those most urgent (R2 = 0.15). Case-generic measures of queue performance for bypass surgery in Ontario were not reflective of the waiting-list experiences of those most urgent. Our results reinforce the concept that urgency-specific waiting list monitoring systems are required to best evaluate and appropriately respond to fluctuations in queue performance.

Where does the waiting list begin? A short review of the dynamics and organization of modern waiting lists.

PubMed

Rotstein, Dalia L; Alter, David A

2006-06-01

Waiting for medical care is the by-product of system rationing, where demand exceeds supply. In this short report we expand on the conventional concept of the queue, by focusing on the regulation of demand and by incorporating a funnel and spout analogy. Real-world examples are used to illustrate the infancy of funnel or demand-side reform initiatives targeting the queue, and the suggestion is made that policy needs to address the concept of 'waiting' much earlier in the treatment cycle.

Capacity-constrained traffic assignment in networks with residual queues

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lam, W.H.K.; Zhang, Y.

2000-04-01

This paper proposes a capacity-constrained traffic assignment model for strategic transport planning in which the steady-state user equilibrium principle is extended for road networks with residual queues. Therefore, the road-exit capacity and the queuing effects can be incorporated into the strategic transport model for traffic forecasting. The proposed model is applicable to the congested network particularly when the traffic demands exceeds the capacity of the network during the peak period. An efficient solution method is proposed for solving the steady-state traffic assignment problem with residual queues. Then a simple numerical example is employed to demonstrate the application of the proposedmore » model and solution method, while an example of a medium-sized arterial highway network in Sioux Falls, South Dakota, is used to test the applicability of the proposed solution to real problems.« less

Application of queuing model in Dubai's busiest megaplex

NASA Astrophysics Data System (ADS)

Bhagchandani, Maneesha; Bajpai, Priti

2013-09-01

This paper provides a study and analysis of the extremely busy booking counters at the Megaplex in Dubai using the queuing model and simulation. Dubai is an emirate in UAE with a multicultural population. Majority of the population in Dubai is foreign born. Cinema is one of the major forms of entertainment. There are more than 13 megaplexes each with a number of screens ranging from 3 to 22. They screen movies in English, Arabic, Hindi and other languages. It has been observed that during the weekends megaplexes attract a large number of crowd resulting in long queues at the booking counters. One of the busiest megaplex was selected for the study. Queuing theory satisfies the model when tested in real time situation. The concepts of arrival rate, service rate, utilization rate, waiting time in the system, average number of people in the queue, using Little's Theorem and M/M/s queuing model along with simulation software have been used to suggest an empirical solution. The aim of the paper is twofold-To assess the present situation at the Megaplex and give recommendations to optimize the use of booking counters.

Wireless Sensor Network Congestion Control Based on Standard Particle Swarm Optimization and Single Neuron PID

PubMed Central

Yang, Xiaoping; Chen, Xueying; Xia, Riting; Qian, Zhihong

2018-01-01

Aiming at the problem of network congestion caused by the large number of data transmissions in wireless routing nodes of wireless sensor network (WSN), this paper puts forward an algorithm based on standard particle swarm–neural PID congestion control (PNPID). Firstly, PID control theory was applied to the queue management of wireless sensor nodes. Then, the self-learning and self-organizing ability of neurons was used to achieve online adjustment of weights to adjust the proportion, integral and differential parameters of the PID controller. Finally, the standard particle swarm optimization to neural PID (NPID) algorithm of initial values of proportion, integral and differential parameters and neuron learning rates were used for online optimization. This paper describes experiments and simulations which show that the PNPID algorithm effectively stabilized queue length near the expected value. At the same time, network performance, such as throughput and packet loss rate, was greatly improved, which alleviated network congestion and improved network QoS. PMID:29671822

Wireless Sensor Network Congestion Control Based on Standard Particle Swarm Optimization and Single Neuron PID.

PubMed

Yang, Xiaoping; Chen, Xueying; Xia, Riting; Qian, Zhihong

2018-04-19

Aiming at the problem of network congestion caused by the large number of data transmissions in wireless routing nodes of wireless sensor network (WSN), this paper puts forward an algorithm based on standard particle swarm⁻neural PID congestion control (PNPID). Firstly, PID control theory was applied to the queue management of wireless sensor nodes. Then, the self-learning and self-organizing ability of neurons was used to achieve online adjustment of weights to adjust the proportion, integral and differential parameters of the PID controller. Finally, the standard particle swarm optimization to neural PID (NPID) algorithm of initial values of proportion, integral and differential parameters and neuron learning rates were used for online optimization. This paper describes experiments and simulations which show that the PNPID algorithm effectively stabilized queue length near the expected value. At the same time, network performance, such as throughput and packet loss rate, was greatly improved, which alleviated network congestion and improved network QoS.

Estimating the waiting time of multi-priority emergency patients with downstream blocking.

PubMed

Lin, Di; Patrick, Jonathan; Labeau, Fabrice

2014-03-01

To characterize the coupling effect between patient flow to access the emergency department (ED) and that to access the inpatient unit (IU), we develop a model with two connected queues: one upstream queue for the patient flow to access the ED and one downstream queue for the patient flow to access the IU. Building on this patient flow model, we employ queueing theory to estimate the average waiting time across patients. Using priority specific wait time targets, we further estimate the necessary number of ED and IU resources. Finally, we investigate how an alternative way of accessing ED (Fast Track) impacts the average waiting time of patients as well as the necessary number of ED/IU resources. This model as well as the analysis on patient flow can help the designer or manager of a hospital make decisions on the allocation of ED/IU resources in a hospital.

Traffic signal synchronization in the saturated high-density grid road network.

PubMed

Hu, Xiaojian; Lu, Jian; Wang, Wei; Zhirui, Ye

2015-01-01

Most existing traffic signal synchronization strategies do not perform well in the saturated high-density grid road network (HGRN). Traffic congestion often occurs in the saturated HGRN, and the mobility of the network is difficult to restore. In order to alleviate traffic congestion and to improve traffic efficiency in the network, the study proposes a regional traffic signal synchronization strategy, named the long green and long red (LGLR) traffic signal synchronization strategy. The essence of the strategy is to control the formation and dissipation of queues and to maximize the efficiency of traffic flows at signalized intersections in the saturated HGRN. With this strategy, the same signal control timing plan is used at all signalized intersections in the HGRN, and the straight phase of the control timing plan has a long green time and a long red time. Therefore, continuous traffic flows can be maintained when vehicles travel, and traffic congestion can be alleviated when vehicles stop. Using the strategy, the LGLR traffic signal synchronization model is developed, with the objective of minimizing the number of stops. Finally, the simulation is executed to analyze the performance of the model by comparing it to other models, and the superiority of the LGLR model is evident in terms of delay, number of stops, queue length, and overall performance in the saturated HGRN.

Experiences of Fast Queue health care users in primary health care facilities in eThekwini district, South Africa.

PubMed

Sokhela, Dudu G; Makhanya, Nonhlanhla J; Sibiya, Nokuthula M; Nokes, Kathleen M

2013-07-05

Comprehensive Primary Health Care (PHC), based on the principles of accessibility, availability, affordability, equity and acceptability, was introduced in South Africa to address inequalities in health service provision. Whilst the Fast Queue was instrumental in the promotion of access to health care, a major goal of the PHC approach, facilities were not prepared for the sudden influx of clients. Increased access resulted in long waiting times and queues contributing to dissatisfaction with the service which could lead to missed appointments and non-compliance with established treatment plans. Firstly to describe the experiences of clients using the Fast Queue strategy to access routine healthcare services and secondly, to determine how the clients' experiences led to satisfaction or dissatisfaction with the Fast Queue service. A descriptive qualitative survey using content analysis explored the experiences of the Fast Queue users in a PHC setting. Setting was first identified based on greatest number using the Fast Queue and geographic diversity and then a convenience sample of health care users of the Fast Queue were sampled individually along with one focus group of users who accessed the Queue monthly for medication refills. The same interview guide questions were used for both individual interviews and the one focus group discussion. Five clinics with the highest number of attendees during a three month period and a total of 83 health care users of the Fast Queue were interviewed. The average participant was female, 31 years old, single and unemployed. Two themes with sub-themes emerged: health care user flow and communication, which highlights both satisfaction and dissatisfaction with the fast queue and queue marshals, could assist in directing users to the respective queues, reduce waiting time and keep users satisfied with the use of sign posts where there is a lack of human resources. Effective health communication strategies contribute to positive experiences by health care users and these can be effected by: (1) involvement of health care providers in planning the construction of health facilities to give input about patient flow, infection prevention and control and provision of privacy, (2) effective complaints mechanisms for users to ensure that complaints are followed up and (3)encouraging users to arrive at the facility throughout the day, rather than the present practice where all users arrive at the clinic early in the morning.

Queueing for healthcare.

PubMed

Palvannan, R Kannapiran; Teow, Kiok Liang

2012-04-01

Patient queues are prevalent in healthcare and wait time is one measure of access to care. We illustrate Queueing Theory-an analytical tool that has provided many insights to service providers when designing new service systems and managing existing ones. This established theory helps us to quantify the appropriate service capacity to meet the patient demand, balancing system utilization and the patient's wait time. It considers four key factors that affect the patient's wait time: average patient demand, average service rate and the variation in both. We illustrate four basic insights that will be useful for managers and doctors who manage healthcare delivery systems, at hospital or department level. Two examples from local hospitals are shown where we have used queueing models to estimate the service capacity and analyze the impact of capacity configurations, while considering the inherent variation in healthcare.

TIME SHARING WITH AN EXPLICIT PRIORITY QUEUING DISCIPLINE.

DTIC Science & Technology

exponentially distributed service times and an ordered priority queue. Each new arrival buys a position in this queue by offering a non-negative bribe to the...parameters is investigated through numerical examples. Finally, to maximize the expected revenue per unit time accruing from bribes , an optimization

Application of queuing theory to patient satisfaction at a tertiary hospital in Nigeria

PubMed Central

Ameh, Nkeiruka; Sabo, B.; Oyefabi, M. O.

2013-01-01

Background: Queuing theory is the mathematical approach to the analysis of waiting lines in any setting where arrival rate of subjects is faster than the system can handle. It is applicable to healthcare settings where the systems have excess capacity to accommodate random variations. Materials and Methods: A cross-sectional descriptive survey was done. Questionnaires were administered to patients who attended the general outpatient department. Observations were also made on the queuing model and the service discipline at the clinic. Questions were meant to obtain demographic characteristics and the time spent on the queue by patients before being seen by a doctor, time spent with the doctor, their views about the time spent on the queue and useful suggestions on how to reduce the time spent on the queue. A total of 210 patients were surveyed. Results: Majority of the patients (164, 78.1%) spent 2 h or less on the queue before being seen by a doctor and less than 1 h to see the doctor. Majority of the patients (144, 68.5%) were satisfied with the time they spent on the queue before being seen by a doctor. Useful suggestions proffered by the patients to decrease the time spent on the queue before seeing a doctor at the clinic included: that more doctors be employed (46, 21.9%), that doctors should come to work on time (25, 11.9%), that first-come-first served be observed strictly (32, 15.2%) and others suggested that the records staff should desist from collecting bribes from patients in order to place their cards before others. The queuing method employed at the clinic is the multiple single channel type and the service discipline is priority service. The patients who spent less time on the queue (<1 h) before seeing the doctor were more satisfied than those who spent more time (P < 0.05). Conclusion: The study has revealed that majority of the patients were satisfied with the practice at the general outpatient department. However, there is a need to employ measures to respond to the suggestions given by the patients who are the beneficiaries of the hospital services. PMID:23661902

Sustaining change: the imperative for patient access strategies.

PubMed

Glynn, Peter A R

2006-01-01

The paper by Trypuc, MacLeod and Hudson provides a timely and important overview of methods to sustain provincial wait time strategies. The emphasis on accountability for patient access to timely care throughout the healthcare system comes through strongly--as it should. These accountabilities are made "real" through purchase service agreements. Physician-hospital relationships are a fundamental aspect of this accountability. This commentary suggests the inclusion of two additional supporting tools in addition to those cited by the authors of the lead paper--quality monitoring and the use of industrial engineering techniques for queue management and patient flow analysis. Strong and persistent leadership of patient access strategies will ensure sustainable change.

Monitoring System for the GRID Monte Carlo Mass Production in the H1 Experiment at DESY

NASA Astrophysics Data System (ADS)

Bystritskaya, Elena; Fomenko, Alexander; Gogitidze, Nelly; Lobodzinski, Bogdan

2014-06-01

The H1 Virtual Organization (VO), as one of the small VOs, employs most components of the EMI or gLite Middleware. In this framework, a monitoring system is designed for the H1 Experiment to identify and recognize within the GRID the best suitable resources for execution of CPU-time consuming Monte Carlo (MC) simulation tasks (jobs). Monitored resources are Computer Elements (CEs), Storage Elements (SEs), WMS-servers (WMSs), CernVM File System (CVMFS) available to the VO HONE and local GRID User Interfaces (UIs). The general principle of monitoring GRID elements is based on the execution of short test jobs on different CE queues using submission through various WMSs and directly to the CREAM-CEs as well. Real H1 MC Production jobs with a small number of events are used to perform the tests. Test jobs are periodically submitted into GRID queues, the status of these jobs is checked, output files of completed jobs are retrieved, the result of each job is analyzed and the waiting time and run time are derived. Using this information, the status of the GRID elements is estimated and the most suitable ones are included in the automatically generated configuration files for use in the H1 MC production. The monitoring system allows for identification of problems in the GRID sites and promptly reacts on it (for example by sending GGUS (Global Grid User Support) trouble tickets). The system can easily be adapted to identify the optimal resources for tasks other than MC production, simply by changing to the relevant test jobs. The monitoring system is written mostly in Python and Perl with insertion of a few shell scripts. In addition to the test monitoring system we use information from real production jobs to monitor the availability and quality of the GRID resources. The monitoring tools register the number of job resubmissions, the percentage of failed and finished jobs relative to all jobs on the CEs and determine the average values of waiting and running time for the involved GRID queues. CEs which do not meet the set criteria can be removed from the production chain by including them in an exception table. All of these monitoring actions lead to a more reliable and faster execution of MC requests.

Queue theory for triangular and weibull arrival distribution models (case study of Banyumanik toll)

NASA Astrophysics Data System (ADS)

Sugito; Rahmawati, Rita; Kusuma Wardhani, Jenesia

2018-05-01

Queuing is one of the most common phenomena in daily life. Queued also happens on highway during busy time. The Electronic Toll Collection (ETC) was the new system of the Banyumanik toll gate which operates in 2014. Before ETC, Banyumanik toll gate users got regular service (regular toll gate) by paying in cash only. The ETC benefits more than regular service, but automatic toll gate (ETC) users are still few compared to regular toll gate users. To know the effectiveness of substance service, this paper used analysis of queuing system. The research was conducted at Toll Gate Banyumanik with the implementation time on 26-28 December 2016 for Ungaran-Semarang direction, and 29-31 December 2016 for Semarang- Ungaran direction. In one day, observation was done for 11 hours. That was at 07.00 a.m. until 06.00 p.m. There are 4 models of queues at Banyumanik toll gate. Here the four models will be used on the number of arrival and service time. Based on the simulation with Arena, the result showed that queue model regular toll gate in Ugaran-Semarang direction is (Tria/G/3):(GD/∞/∞) and the queue model for automatic toll gate is (G/G/3):(GD/∞/∞). While the queue model for the direction of Semarang-Ungaran regular toll gate is (G/G/3):(GD/∞/∞) and the queue model of automatic toll gate is (Weib/G/3):(GD/∞/∞).

A queueing network model to analyze the impact of parallelization of care on patient cycle time.

PubMed

Jiang, Lixiang; Giachetti, Ronald E

2008-09-01

The total time a patient spends in an outpatient facility, called the patient cycle time, is a major contributor to overall patient satisfaction. A frequently recommended strategy to reduce the total time is to perform some activities in parallel thereby shortening patient cycle time. To analyze patient cycle time this paper extends and improves upon existing multi-class open queueing network model (MOQN) so that the patient flow in an urgent care center can be modeled. Results of the model are analyzed using data from an urgent care center contemplating greater parallelization of patient care activities. The results indicate that parallelization can reduce the cycle time for those patient classes which require more than one diagnostic and/ or treatment intervention. However, for many patient classes there would be little if any improvement, indicating the importance of tools to analyze business process reengineering rules. The paper makes contributions by implementing an approximation for fork/join queues in the network and by improving the approximation for multiple server queues in both low traffic and high traffic conditions. We demonstrate the accuracy of the MOQN results through comparisons to simulation results.

Traffic Signal Synchronization in the Saturated High-Density Grid Road Network

PubMed Central

Hu, Xiaojian; Lu, Jian; Wang, Wei; Zhirui, Ye

2015-01-01

Most existing traffic signal synchronization strategies do not perform well in the saturated high-density grid road network (HGRN). Traffic congestion often occurs in the saturated HGRN, and the mobility of the network is difficult to restore. In order to alleviate traffic congestion and to improve traffic efficiency in the network, the study proposes a regional traffic signal synchronization strategy, named the long green and long red (LGLR) traffic signal synchronization strategy. The essence of the strategy is to control the formation and dissipation of queues and to maximize the efficiency of traffic flows at signalized intersections in the saturated HGRN. With this strategy, the same signal control timing plan is used at all signalized intersections in the HGRN, and the straight phase of the control timing plan has a long green time and a long red time. Therefore, continuous traffic flows can be maintained when vehicles travel, and traffic congestion can be alleviated when vehicles stop. Using the strategy, the LGLR traffic signal synchronization model is developed, with the objective of minimizing the number of stops. Finally, the simulation is executed to analyze the performance of the model by comparing it to other models, and the superiority of the LGLR model is evident in terms of delay, number of stops, queue length, and overall performance in the saturated HGRN. PMID:25663835

Queue and stack sorting algorithm optimization and performance analysis

NASA Astrophysics Data System (ADS)

Qian, Mingzhu; Wang, Xiaobao

2018-04-01

Sorting algorithm is one of the basic operation of a variety of software development, in data structures course specializes in all kinds of sort algorithm. The performance of the sorting algorithm is directly related to the efficiency of the software. A lot of excellent scientific research queue is constantly optimizing algorithm, algorithm efficiency better as far as possible, the author here further research queue combined with stacks of sorting algorithms, the algorithm is mainly used for alternating operation queue and stack storage properties, Thus avoiding the need for a large number of exchange or mobile operations in the traditional sort. Before the existing basis to continue research, improvement and optimization, the focus on the optimization of the time complexity of the proposed optimization and improvement, The experimental results show that the improved effectively, at the same time and the time complexity and space complexity of the algorithm, the stability study corresponding research. The improvement and optimization algorithm, improves the practicability.

The radiology digital dashboard: effects on report turnaround time.

PubMed

Morgan, Matthew B; Branstetter, Barton F; Lionetti, David M; Richardson, Jeremy S; Chang, Paul J

2008-03-01

As radiology departments transition to near-complete digital information management, work flows and their supporting informatics infrastructure are becoming increasingly complex. Digital dashboards can integrate separate computerized information systems and summarize key work flow metrics in real time to facilitate informed decision making. A PACS-integrated digital dashboard function designed to alert radiologists to their unsigned report queue status, coupled with an actionable link to the report signing application, resulted in a 24% reduction in the time between transcription and report finalization. The dashboard was well received by radiologists who reported high usage for signing reports. Further research is needed to identify and evaluate other potentially useful work flow metrics for inclusion in a radiology clinical dashboard.

Soft Real-Time PID Control on a VME Computer

NASA Technical Reports Server (NTRS)

Karayan, Vahag; Sander, Stanley; Cageao, Richard

2007-01-01

microPID (uPID) is a computer program for real-time proportional + integral + derivative (PID) control of a translation stage in a Fourier-transform ultraviolet spectrometer. microPID implements a PID control loop over a position profile at sampling rate of 8 kHz (sampling period 125microseconds). The software runs in a strippeddown Linux operating system on a VersaModule Eurocard (VME) computer operating in real-time priority queue using an embedded controller, a 16-bit digital-to-analog converter (D/A) board, and a laser-positioning board (LPB). microPID consists of three main parts: (1) VME device-driver routines, (2) software that administers a custom protocol for serial communication with a control computer, and (3) a loop section that obtains the current position from an LPB-driver routine, calculates the ideal position from the profile, and calculates a new voltage command by use of an embedded PID routine all within each sampling period. The voltage command is sent to the D/A board to control the stage. microPID uses special kernel headers to obtain microsecond timing resolution. Inasmuch as microPID implements a single-threaded process and all other processes are disabled, the Linux operating system acts as a soft real-time system.

A multiprocessor airborne lidar data system

NASA Technical Reports Server (NTRS)

Wright, C. W.; Bailey, S. A.; Heath, G. E.; Piazza, C. R.

1988-01-01

A new multiprocessor data acquisition system was developed for the existing Airborne Oceanographic Lidar (AOL). This implementation simultaneously utilizes five single board 68010 microcomputers, the UNIX system V operating system, and the real time executive VRTX. The original data acquisition system was implemented on a Hewlett Packard HP 21-MX 16 bit minicomputer using a multi-tasking real time operating system and a mixture of assembly and FORTRAN languages. The present collection of data sources produce data at widely varied rates and require varied amounts of burdensome real time processing and formatting. It was decided to replace the aging HP 21-MX minicomputer with a multiprocessor system. A new and flexible recording format was devised and implemented to accommodate the constantly changing sensor configuration. A central feature of this data system is the minimization of non-remote sensing bus traffic. Therefore, it is highly desirable that each micro be capable of functioning as much as possible on-card or via private peripherals. The bus is used primarily for the transfer of remote sensing data to or from the buffer queue.

Advanced Design and Implementation of a Control Architecture for Long Range Autonomous Planetary Rovers

NASA Technical Reports Server (NTRS)

Martin-Alvarez, A.; Hayati, S.; Volpe, R.; Petras, R.

1999-01-01

An advanced design and implementation of a Control Architecture for Long Range Autonomous Planetary Rovers is presented using a hierarchical top-down task decomposition, and the common structure of each design is presented based on feedback control theory. Graphical programming is presented as a common intuitive language for the design when a large design team is composed of managers, architecture designers, engineers, programmers, and maintenance personnel. The whole design of the control architecture consists in the classic control concepts of cyclic data processing and event-driven reaction to achieve all the reasoning and behaviors needed. For this purpose, a commercial graphical tool is presented that includes the mentioned control capabilities. Messages queues are used for inter-communication among control functions, allowing Artificial Intelligence (AI) reasoning techniques based on queue manipulation. Experimental results show a highly autonomous control system running in real time on top the JPL micro-rover Rocky 7 controlling simultaneously several robotic devices. This paper validates the sinergy between Artificial Intelligence and classic control concepts in having in advanced Control Architecture for Long Range Autonomous Planetary Rovers.

Transient probabilities for queues with applications to hospital waiting list management.

PubMed

Joy, Mark; Jones, Simon

2005-08-01

In this paper we study queuing systems within the NHS. Recently imposed government performance targets lead NHS executives to investigate and instigate alternative management strategies, thereby imposing structural changes on the queues. Under such circumstances, it is most unlikely that such systems are in equilibrium. It is crucial, in our opinion, to recognise this state of affairs in order to make a balanced assessment of the role of queue management in the modern NHS. From a mathematical perspective it should be emphasised that measures of the state of a queue based upon the assumption of statistical equilibrium (a pervasive methodology in the study of queues) are simply wrong in the above scenario. To base strategic decisions around such ideas is therefore highly questionable and it is one of the purposes of this paper to offer alternatives: we present some (recent) research whose results generate performance measures and measures of risk, for example, of waiting-times growing unacceptably large; we emphasise that these results concern the transient behaviour of the queueing model-there is no asssumption of statistical equilibrium. We also demonstrate that our results are computationally tractable.

Fokker-Planck description for the queue dynamics of large tick stocks.

PubMed

Garèche, A; Disdier, G; Kockelkoren, J; Bouchaud, J-P

2013-09-01

Motivated by empirical data, we develop a statistical description of the queue dynamics for large tick assets based on a two-dimensional Fokker-Planck (diffusion) equation. Our description explicitly includes state dependence, i.e., the fact that the drift and diffusion depend on the volume present on both sides of the spread. "Jump" events, corresponding to sudden changes of the best limit price, must also be included as birth-death terms in the Fokker-Planck equation. All quantities involved in the equation can be calibrated using high-frequency data on the best quotes. One of our central findings is that the dynamical process is approximately scale invariant, i.e., the only relevant variable is the ratio of the current volume in the queue to its average value. While the latter shows intraday seasonalities and strong variability across stocks and time periods, the dynamics of the rescaled volumes is universal. In terms of rescaled volumes, we found that the drift has a complex two-dimensional structure, which is a sum of a gradient contribution and a rotational contribution, both stable across stocks and time. This drift term is entirely responsible for the dynamical correlations between the ask queue and the bid queue.

Fokker-Planck description for the queue dynamics of large tick stocks

NASA Astrophysics Data System (ADS)

Garèche, A.; Disdier, G.; Kockelkoren, J.; Bouchaud, J.-P.

2013-09-01

Motivated by empirical data, we develop a statistical description of the queue dynamics for large tick assets based on a two-dimensional Fokker-Planck (diffusion) equation. Our description explicitly includes state dependence, i.e., the fact that the drift and diffusion depend on the volume present on both sides of the spread. “Jump” events, corresponding to sudden changes of the best limit price, must also be included as birth-death terms in the Fokker-Planck equation. All quantities involved in the equation can be calibrated using high-frequency data on the best quotes. One of our central findings is that the dynamical process is approximately scale invariant, i.e., the only relevant variable is the ratio of the current volume in the queue to its average value. While the latter shows intraday seasonalities and strong variability across stocks and time periods, the dynamics of the rescaled volumes is universal. In terms of rescaled volumes, we found that the drift has a complex two-dimensional structure, which is a sum of a gradient contribution and a rotational contribution, both stable across stocks and time. This drift term is entirely responsible for the dynamical correlations between the ask queue and the bid queue.

Dynamic properties of chasers in a moving queue based on a delayed chasing model

NASA Astrophysics Data System (ADS)

Ning, Guo; Jian-Xun, Ding; Xiang, Ling; Qin, Shi; Reinhart, Kühne

2016-05-01

A delayed chasing model is proposed to simulate the chase behavior in the queue, where each member regards the closest one ahead as the target, and the leader is attracted to a target point with slight fluctuation. When the initial distances between neighbors possess an identical low value, the fluctuating target of the leader can cause an amplified disturbance in the queue. After a long period of time, the queue recovers the stable state from the disturbance, forming a straight-line-like pattern again, but distances between neighbors grow. Whether the queue can keep stable or not depends on initial distance, desired velocity, and relaxation time. Furthermore, we carry out convergence analysis to explain the divergence transformation behavior and confirm the convergence conditions, which is in approximate agreement with simulations. Project supported by the National Natural Science Foundation of China (Grant Nos. 71071044, 71001001, 71201041, and 11247291), the Doctoral Program of the Ministry of Education of China (Grant Nos. 20110111120023 and 20120111120022), the Postdoctoral Fund Project of China (Grant No. 2013M530295), the National Basic Research Program of China (Grant No. 2012CB725404), and 1000 Plan for Foreign Talent, China (Grant No. WQ20123400070).

Ada Quality and Style: Guidelines for Professional Programmers, Version 02.01.01

DTIC Science & Technology

1992-12-01

47, 78, 79 predicate queue , entry not prioritized, 95 as function name, 22 for boolean object, 21 R preemptive scheduling. 118 race condition. 49...when lower priority tasks are given service while higher priority tasks remain blocked. In the above example, this occurred because entry queues are...from an entry queue 100 Ada QUALITY AND STYLE due to execution of an abort statement as well as expiration of a timed entry call. The use of this

Conservative parallel simulation of priority class queueing networks

NASA Technical Reports Server (NTRS)

Nicol, David

1992-01-01

A conservative synchronization protocol is described for the parallel simulation of queueing networks having C job priority classes, where a job's class is fixed. This problem has long vexed designers of conservative synchronization protocols because of its seemingly poor ability to compute lookahead: the time of the next departure. For, a job in service having low priority can be preempted at any time by an arrival having higher priority and an arbitrarily small service time. The solution is to skew the event generation activity so that the events for higher priority jobs are generated farther ahead in simulated time than lower priority jobs. Thus, when a lower priority job enters service for the first time, all the higher priority jobs that may preempt it are already known and the job's departure time can be exactly predicted. Finally, the protocol was analyzed and it was demonstrated that good performance can be expected on the simulation of large queueing networks.

Conservative parallel simulation of priority class queueing networks

NASA Technical Reports Server (NTRS)

Nicol, David M.

1990-01-01

A conservative synchronization protocol is described for the parallel simulation of queueing networks having C job priority classes, where a job's class is fixed. This problem has long vexed designers of conservative synchronization protocols because of its seemingly poor ability to compute lookahead: the time of the next departure. For, a job in service having low priority can be preempted at any time by an arrival having higher priority and an arbitrarily small service time. The solution is to skew the event generation activity so that the events for higher priority jobs are generated farther ahead in simulated time than lower priority jobs. Thus, when a lower priority job enters service for the first time, all the higher priority jobs that may preempt it are already known and the job's departure time can be exactly predicted. Finally, the protocol was analyzed and it was demonstrated that good performance can be expected on the simulation of large queueing networks.

Queue position in the endoscopic schedule impacts effectiveness of colonoscopy.

PubMed

Lee, Alexander; Iskander, John M; Gupta, Nitin; Borg, Brian B; Zuckerman, Gary; Banerjee, Bhaskar; Gyawali, C Prakash

2011-08-01

Endoscopist fatigue potentially impacts colonoscopy. Fatigue is difficult to quantitate, but polyp detection rates between non-fatigued and fatigued time periods could represent a surrogate marker. We assessed whether timing variables impacted polyp detection rates at a busy tertiary care endoscopy suite. Consecutive patients undergoing colonoscopy were retrospectively identified. Indications, clinical demographics, pre-procedural, and procedural variables were extracted from chart review; colonoscopy findings were determined from the procedure reports. Three separate timing variables were assessed as surrogate markers for endoscopist fatigue: morning vs. afternoon procedures, start times throughout the day, and queue position, a unique variable that takes into account the number of procedures performed before the colonoscopy of interest. Univariate and multivariate analyses were performed to determine whether timing variables and other clinical, pre-procedural, and procedural variables predicted polyp detection. During the 4-month study period, 1,083 outpatient colonoscopy procedures (57.5±0.5 years, 59.5% female) were identified, performed by 28 endoscopists (mean 38.7 procedures/endoscopist), with a mean polyp detection rate of 0.851/colonoscopy. At least, one adenoma was detected in 297 procedures (27.4%). A 12.4% reduction in mean detected polyps was detected between morning and afternoon procedures (0.90±0.06 vs. 0.76±0.06, P=0.15). Using start time on a continuous scale, however, each elapsed hour in the day was associated with a 4.6% reduction in polyp detection (P=0.005). When queue position was assessed, a 5.4% reduction in polyp detection was noted with each increase in queue position (P=0.016). These results remained significant when controlled for each individual endoscopist. Polyp detection rates decline as time passes during an endoscopist's schedule, potentially from endoscopist fatigue. Queue position may be a novel surrogate measure for operator fatigue.

Improving Aircraft Refueling Procedures at Naval Air Station Oceana

DTIC Science & Technology

2012-06-01

Station (NAS) Oceana, VA, using aircraft waiting time for fuel as a measure of performance. We develop a computer-assisted discrete-event simulation to...Station (NAS) Oceana, VA, using aircraft waiting time for fuel as a measure of performance. We develop a computer-assisted discrete-event simulation...server queue, with general interarrival and service time distributions gpm Gallons per minute JDK Java development kit M/M/1 Single-server queue

Proteolytic crosstalk in multi-protease networks

NASA Astrophysics Data System (ADS)

Ogle, Curtis T.; Mather, William H.

2016-04-01

Processive proteases, such as ClpXP in E. coli, are conserved enzyme assemblies that can recognize and rapidly degrade proteins. These proteases are used for a number of purposes, including degrading mistranslated proteins and controlling cellular stress response. However, proteolytic machinery within the cell is limited in capacity and can lead to a bottleneck in protein degradation, whereby many proteins compete (‘queue’) for proteolytic resources. Previous work has demonstrated that such queueing can lead to pronounced statistical relationships between different protein counts when proteins compete for a single common protease. However, real cells contain many different proteases, e.g. ClpXP, ClpAP, and Lon in E. coli, and it is not clear how competition between proteins for multiple classes of protease would influence the dynamics of cellular networks. In the present work, we theoretically demonstrate that a multi-protease proteolytic bottleneck can substantially couple the dynamics for both simple and complex (oscillatory) networks, even between substrates with substantially different affinities for protease. For these networks, queueing often leads to strong positive correlations between protein counts, and these correlations are strongest near the queueing theoretic point of balance. Furthermore, we find that the qualitative behavior of these networks depends on the relative size of the absolute affinity of substrate to protease compared to the cross affinity of substrate to protease, leading in certain regimes to priority queue statistics.

Nested Fork-Join Queuing Networks and Their Application to Mobility Airfield Operations Analysis.

DTIC Science & Technology

1997-03-01

shortest queue length. Setia , Squillante, and Tripathi [109] extend Makowski and Nelson’s work by performing a quantitative assessment of a range of...Markov chains." Numerical Solution of Markov Chains, edited by W. J. Stewart, 63- 88. Basel: Marcel Dekker, 1991. [109] Setia , S. K., and others

Evaluation of concurrent priority queue algorithms. Technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Q.

1991-02-01

The priority queue is a fundamental data structure that is used in a large variety of parallel algorithms, such as multiprocessor scheduling and parallel best-first search of state-space graphs. This thesis addresses the design and experimental evaluation of two novel concurrent priority queues: a parallel Fibonacci heap and a concurrent priority pool, and compares them with the concurrent binary heap. The parallel Fibonacci heap is based on the sequential Fibonacci heap, which is theoretically the most efficient data structure for sequential priority queues. This scheme not only preserves the efficient operation time bounds of its sequential counterpart, but also hasmore » very low contention by distributing locks over the entire data structure. The experimental results show its linearly scalable throughput and speedup up to as many processors as tested (currently 18). A concurrent access scheme for a doubly linked list is described as part of the implementation of the parallel Fibonacci heap. The concurrent priority pool is based on the concurrent B-tree and the concurrent pool. The concurrent priority pool has the highest throughput among the priority queues studied. Like the parallel Fibonacci heap, the concurrent priority pool scales linearly up to as many processors as tested. The priority queues are evaluated in terms of throughput and speedup. Some applications of concurrent priority queues such as the vertex cover problem and the single source shortest path problem are tested.« less

Concurrent array-based queue

DOEpatents

Heidelberger, Philip; Steinmacher-Burow, Burkhard

2015-01-06

According to one embodiment, a method for implementing an array-based queue in memory of a memory system that includes a controller includes configuring, in the memory, metadata of the array-based queue. The configuring comprises defining, in metadata, an array start location in the memory for the array-based queue, defining, in the metadata, an array size for the array-based queue, defining, in the metadata, a queue top for the array-based queue and defining, in the metadata, a queue bottom for the array-based queue. The method also includes the controller serving a request for an operation on the queue, the request providing the location in the memory of the metadata of the queue.

Routing in Networks with Random Topologies

NASA Technical Reports Server (NTRS)

Bambos, Nicholas

1997-01-01

We examine the problems of routing and server assignment in networks with random connectivities. In such a network the basic topology is fixed, but during each time slot and for each of tis input queues, each server (node) is either connected to or disconnected from each of its queues with some probability.

Multiserver Queueing Model subject to Single Exponential Vacation

NASA Astrophysics Data System (ADS)

Vijayashree, K. V.; Janani, B.

2018-04-01

A multi-server queueing model subject to single exponential vacation is considered. The arrivals are allowed to join the queue according to a Poisson distribution and services takes place according to an exponential distribution. Whenever the system becomes empty, all the servers goes for a vacation and returns back after a fixed interval of time. The servers then starts providing service if there are waiting customers otherwise they will wait to complete the busy period. The vacation times are also assumed to be exponentially distributed. In this paper, the stationary and transient probabilities for the number of customers during ideal and functional state of the server are obtained explicitly. Also, numerical illustrations are added to visualize the effect of various parameters.

Schedulers with load-store queue awareness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Tong; Eichenberger, Alexandre E.; Jacob, Arpith C.

2017-02-07

In one embodiment, a computer-implemented method includes tracking a size of a load-store queue (LSQ) during compile time of a program. The size of the LSQ is time-varying and indicates how many memory access instructions of the program are on the LSQ. The method further includes scheduling, by a computer processor, a plurality of memory access instructions of the program based on the size of the LSQ.

Schedulers with load-store queue awareness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Tong; Eichenberger, Alexandre E.; Jacob, Arpith C.

2017-01-24

In one embodiment, a computer-implemented method includes tracking a size of a load-store queue (LSQ) during compile time of a program. The size of the LSQ is time-varying and indicates how many memory access instructions of the program are on the LSQ. The method further includes scheduling, by a computer processor, a plurality of memory access instructions of the program based on the size of the LSQ.

Delay decomposition at a single server queue with constant service time and multiple inputs

NASA Technical Reports Server (NTRS)

Ziegler, C.; Schilling, D. L.

1978-01-01

Two network consisting of single server queues, each with a constant service time, are considered. The external inputs to each network are assumed to follow some general probability distribution. Several interesting equivalencies that exist between the two networks considered are derived. This leads to the introduction of an important concept in delay decomposition. It is shown that the waiting time experienced by a customer can be decomposed into two basic components called self-delay and interference delay.

Multi-Class Analytical Models of the DECsystem-10 Job-Swapping Behavior.

DTIC Science & Technology

1981-12-01

Mark of the Unicorn for developing Scribble, the best text formatter for a CP/M home computer I’ve ever seen, and for their patient help when I...requests for service will tend to decrease as the queue length grows . The finite population model, also known as the machine interference model, was

Techniques for Increasing the Efficiency of Automation Systems in School Library Media Centers.

ERIC Educational Resources Information Center

Caffarella, Edward P.

1996-01-01

Discusses methods of managing queues (waiting lines) to optimize the use of student computer stations in school library media centers and to make searches more efficient and effective. The three major factors in queue management are arrival interval of the patrons, service time, and number of stations. (Author/LRW)

Delay decomposition at a single server queue with constant service time and multiple inputs. [Waiting time on computer network

NASA Technical Reports Server (NTRS)

Ziegler, C.; Schilling, D. L.

1977-01-01

Two networks consisting of single server queues, each with a constant service time, are considered. The external inputs to each network are assumed to follow some general probability distribution. Several interesting equivalencies that exist between the two networks considered are derived. This leads to the introduction of an important concept in delay decomposition. It is shown that the waiting time experienced by a customer can be decomposed into two basic components called self delay and interference delay.

A lock-free priority queue design based on multi-dimensional linked lists

DOE PAGES

Dechev, Damian; Zhang, Deli

2015-04-03

The throughput of concurrent priority queues is pivotal to multiprocessor applications such as discrete event simulation, best-first search and task scheduling. Existing lock-free priority queues are mostly based on skiplists, which probabilistically create shortcuts in an ordered list for fast insertion of elements. The use of skiplists eliminates the need of global rebalancing in balanced search trees and ensures logarithmic sequential search time on average, but the worst-case performance is linear with respect to the input size. In this paper, we propose a quiescently consistent lock-free priority queue based on a multi-dimensional list that guarantees worst-case search time of O(logN)more » for key universe of size N. The novel multi-dimensional list (MDList) is composed of nodes that contain multiple links to child nodes arranged by their dimensionality. The insertion operation works by first injectively mapping the scalar key to a high-dimensional vector, then uniquely locating the target position by using the vector as coordinates. Nodes in MDList are ordered by their coordinate prefixes and the ordering property of the data structure is readily maintained during insertion without rebalancing nor randomization. Furthermore, in our experimental evaluation using a micro-benchmark, our priority queue achieves an average of 50% speedup over the state of the art approaches under high concurrency.« less

A lock-free priority queue design based on multi-dimensional linked lists

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dechev, Damian; Zhang, Deli

The throughput of concurrent priority queues is pivotal to multiprocessor applications such as discrete event simulation, best-first search and task scheduling. Existing lock-free priority queues are mostly based on skiplists, which probabilistically create shortcuts in an ordered list for fast insertion of elements. The use of skiplists eliminates the need of global rebalancing in balanced search trees and ensures logarithmic sequential search time on average, but the worst-case performance is linear with respect to the input size. In this paper, we propose a quiescently consistent lock-free priority queue based on a multi-dimensional list that guarantees worst-case search time of O(logN)more » for key universe of size N. The novel multi-dimensional list (MDList) is composed of nodes that contain multiple links to child nodes arranged by their dimensionality. The insertion operation works by first injectively mapping the scalar key to a high-dimensional vector, then uniquely locating the target position by using the vector as coordinates. Nodes in MDList are ordered by their coordinate prefixes and the ordering property of the data structure is readily maintained during insertion without rebalancing nor randomization. Furthermore, in our experimental evaluation using a micro-benchmark, our priority queue achieves an average of 50% speedup over the state of the art approaches under high concurrency.« less

Vehicular headways on signalized intersections: theory, models, and reality

NASA Astrophysics Data System (ADS)

Krbálek, Milan; Šleis, Jiří

2015-01-01

We discuss statistical properties of vehicular headways measured on signalized crossroads. On the basis of mathematical approaches, we formulate theoretical and empirically inspired criteria for the acceptability of theoretical headway distributions. Sequentially, the multifarious families of statistical distributions (commonly used to fit real-road headway statistics) are confronted with these criteria, and with original empirical time clearances gauged among neighboring vehicles leaving signal-controlled crossroads after a green signal appears. Using three different numerical schemes, we demonstrate that an arrangement of vehicles on an intersection is a consequence of the general stochastic nature of queueing systems, rather than a consequence of traffic rules, driver estimation processes, or decision-making procedures.

Efficient accesses of data structures using processing near memory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jayasena, Nuwan S.; Zhang, Dong Ping; Diez, Paula Aguilera

Systems, apparatuses, and methods for implementing efficient queues and other data structures. A queue may be shared among multiple processors and/or threads without using explicit software atomic instructions to coordinate access to the queue. System software may allocate an atomic queue and corresponding queue metadata in system memory and return, to the requesting thread, a handle referencing the queue metadata. Any number of threads may utilize the handle for accessing the atomic queue. The logic for ensuring the atomicity of accesses to the atomic queue may reside in a management unit in the memory controller coupled to the memory wheremore » the atomic queue is allocated.« less

Preventing messaging queue deadlocks in a DMA environment

DOEpatents

Blocksome, Michael A; Chen, Dong; Gooding, Thomas; Heidelberger, Philip; Parker, Jeff

2014-01-14

Embodiments of the invention may be used to manage message queues in a parallel computing environment to prevent message queue deadlock. A direct memory access controller of a compute node may determine when a messaging queue is full. In response, the DMA may generate and interrupt. An interrupt handler may stop the DMA and swap all descriptors from the full messaging queue into a larger queue (or enlarge the original queue). The interrupt handler then restarts the DMA. Alternatively, the interrupt handler stops the DMA, allocates a memory block to hold queue data, and then moves descriptors from the full messaging queue into the allocated memory block. The interrupt handler then restarts the DMA. During a normal messaging advance cycle, a messaging manager attempts to inject the descriptors in the memory block into other messaging queues until the descriptors have all been processed.

Paying for Express Checkout: Competition and Price Discrimination in Multi-Server Queuing Systems

PubMed Central

Deck, Cary; Kimbrough, Erik O.; Mongrain, Steeve

2014-01-01

We model competition between two firms selling identical goods to customers who arrive in the market stochastically. Shoppers choose where to purchase based upon both price and the time cost associated with waiting for service. One seller provides two separate queues, each with its own server, while the other seller has a single queue and server. We explore the market impact of the multi-server seller engaging in waiting cost-based-price discrimination by charging a premium for express checkout. Specifically, we analyze this situation computationally and through the use of controlled laboratory experiments. We find that this form of price discrimination is harmful to sellers and beneficial to consumers. When the two-queue seller offers express checkout for impatient customers, the single queue seller focuses on the patient shoppers thereby driving down prices and profits while increasing consumer surplus. PMID:24667809

Synchronized flow in oversaturated city traffic.

PubMed

Kerner, Boris S; Klenov, Sergey L; Hermanns, Gerhard; Hemmerle, Peter; Rehborn, Hubert; Schreckenberg, Michael

2013-11-01

Based on numerical simulations with a stochastic three-phase traffic flow model, we reveal that moving queues (moving jams) in oversaturated city traffic dissolve at some distance upstream of the traffic signal while transforming into synchronized flow. It is found that, as in highway traffic [Kerner, Phys. Rev. E 85, 036110 (2012)], such a jam-absorption effect in city traffic is explained by a strong driver's speed adaptation: Time headways (space gaps) between vehicles increase upstream of a moving queue (moving jam), resulting in moving queue dissolution. It turns out that at given traffic signal parameters, the stronger the speed adaptation effect, the shorter the mean distance between the signal location and the road location at which moving queues dissolve fully and oversaturated traffic consists of synchronized flow only. A comparison of the synchronized flow in city traffic found in this Brief Report with synchronized flow in highway traffic is made.

On the optimal use of a slow server in two-stage queueing systems

NASA Astrophysics Data System (ADS)

Papachristos, Ioannis; Pandelis, Dimitrios G.

2017-07-01

We consider two-stage tandem queueing systems with a dedicated server in each queue and a slower flexible server that can attend both queues. We assume Poisson arrivals and exponential service times, and linear holding costs for jobs present in the system. We study the optimal dynamic assignment of servers to jobs assuming that two servers cannot collaborate to work on the same job and preemptions are not allowed. We formulate the problem as a Markov decision process and derive properties of the optimal allocation for the dedicated (fast) servers. Specifically, we show that the one downstream should not idle, and the same is true for the one upstream when holding costs are larger there. The optimal allocation of the slow server is investigated through extensive numerical experiments that lead to conjectures on the structure of the optimal policy.

Paying for express checkout: competition and price discrimination in multi-server queuing systems.

PubMed

Deck, Cary; Kimbrough, Erik O; Mongrain, Steeve

2014-01-01

We model competition between two firms selling identical goods to customers who arrive in the market stochastically. Shoppers choose where to purchase based upon both price and the time cost associated with waiting for service. One seller provides two separate queues, each with its own server, while the other seller has a single queue and server. We explore the market impact of the multi-server seller engaging in waiting cost-based-price discrimination by charging a premium for express checkout. Specifically, we analyze this situation computationally and through the use of controlled laboratory experiments. We find that this form of price discrimination is harmful to sellers and beneficial to consumers. When the two-queue seller offers express checkout for impatient customers, the single queue seller focuses on the patient shoppers thereby driving down prices and profits while increasing consumer surplus.

Synchronized flow in oversaturated city traffic

NASA Astrophysics Data System (ADS)

Kerner, Boris S.; Klenov, Sergey L.; Hermanns, Gerhard; Hemmerle, Peter; Rehborn, Hubert; Schreckenberg, Michael

2013-11-01

Based on numerical simulations with a stochastic three-phase traffic flow model, we reveal that moving queues (moving jams) in oversaturated city traffic dissolve at some distance upstream of the traffic signal while transforming into synchronized flow. It is found that, as in highway traffic [Kerner, Phys. Rev. EPLEEE81539-375510.1103/PhysRevE.85.036110 85, 036110 (2012)], such a jam-absorption effect in city traffic is explained by a strong driver's speed adaptation: Time headways (space gaps) between vehicles increase upstream of a moving queue (moving jam), resulting in moving queue dissolution. It turns out that at given traffic signal parameters, the stronger the speed adaptation effect, the shorter the mean distance between the signal location and the road location at which moving queues dissolve fully and oversaturated traffic consists of synchronized flow only. A comparison of the synchronized flow in city traffic found in this Brief Report with synchronized flow in highway traffic is made.

Self-organization of critical behavior in controlled general queueing models

NASA Astrophysics Data System (ADS)

Blanchard, Ph.; Hongler, M.-O.

2004-03-01

We consider general queueing models of the (G/G/1) type with service times controlled by the busy period. For feedback control mechanisms driving the system to very high traffic load, it is shown the busy period probability density exhibits a generic - {3}/{2} power law which is a typical mean field behavior of SOC models.

Message passing with queues and channels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dozsa, Gabor J; Heidelberger, Philip; Kumar, Sameer

In an embodiment, a reception thread receives a source node identifier, a type, and a data pointer from an application and, in response, creates a receive request. If the source node identifier specifies a source node, the reception thread adds the receive request to a fast-post queue. If a message received from a network does not match a receive request on a posted queue, a polling thread adds a receive request that represents the message to an unexpected queue. If the fast-post queue contains the receive request, the polling thread removes the receive request from the fast-post queue. If themore » receive request that was removed from the fast-post queue does not match the receive request on the unexpected queue, the polling thread adds the receive request that was removed from the fast-post queue to the posted queue. The reception thread and the polling thread execute asynchronously from each other.« less

Increasing available FIFO space to prevent messaging queue deadlocks in a DMA environment

DOEpatents

Blocksome, Michael A [Rochester, MN; Chen, Dong [Croton On Hudson, NY; Gooding, Thomas [Rochester, MN; Heidelberger, Philip [Cortlandt Manor, NY; Parker, Jeff [Rochester, MN

2012-02-07

Embodiments of the invention may be used to manage message queues in a parallel computing environment to prevent message queue deadlock. A direct memory access controller of a compute node may determine when a messaging queue is full. In response, the DMA may generate an interrupt. An interrupt handler may stop the DMA and swap all descriptors from the full messaging queue into a larger queue (or enlarge the original queue). The interrupt handler then restarts the DMA. Alternatively, the interrupt handler stops the DMA, allocates a memory block to hold queue data, and then moves descriptors from the full messaging queue into the allocated memory block. The interrupt handler then restarts the DMA. During a normal messaging advance cycle, a messaging manager attempts to inject the descriptors in the memory block into other messaging queues until the descriptors have all been processed.

Track and mode controller (TMC): a software executive for a high-altitude pointing and tracking experiment

NASA Astrophysics Data System (ADS)

Michnovicz, Michael R.

1997-06-01

A real-time executive has been implemented to control a high altitude pointing and tracking experiment. The track and mode controller (TMC) implements a table driven design, in which the track mode logic for a tracking mission is defined within a state transition diagram (STD). THe STD is implemented as a state transition table in the TMC software. Status Events trigger the state transitions in the STD. Each state, as it is entered, causes a number of processes to be activated within the system. As these processes propagate through the system, the status of key processes are monitored by the TMC, allowing further transitions within the STD. This architecture is implemented in real-time, using the vxWorks operating system. VxWorks message queues allow communication of status events from the Event Monitor task to the STD task. Process commands are propagated to the rest of the system processors by means of the SCRAMNet shared memory network. The system mode logic contained in the STD will autonomously sequence in acquisition, tracking and pointing system through an entire engagement sequence, starting with target detection and ending with aimpoint maintenance. Simulation results and lab test results will be presented to verify the mode controller. In addition to implementing the system mode logic with the STD, the TMC can process prerecorded time sequences of commands required during startup operations. It can also process single commands from the system operator. In this paper, the author presents (1) an overview, in which he describes the TMC architecture, the relationship of an end-to-end simulation to the flight software and the laboratory testing environment, (2) implementation details, including information on the vxWorks message queues and the SCRAMNet shared memory network, (3) simulation results and lab test results which verify the mode controller, and (4) plans for the future, specifically as to how this executive will expedite transition to a fully functional system.

Optimal Scheduling and Fair Service Policy for STDMA in Underwater Networks with Acoustic Communications

PubMed Central

2018-01-01

In this work, a multi-hop string network with a single sink node is analyzed. A periodic optimal scheduling for TDMA operation that considers the characteristic long propagation delay of the underwater acoustic channel is presented. This planning of transmissions is obtained with the help of a new geometrical method based on a 2D lattice in the space-time domain. In order to evaluate the performance of this optimal scheduling, two service policies have been compared: FIFO and Round-Robin. Simulation results, including achievable throughput, packet delay, and queue length, are shown. The network fairness has also been quantified with the Gini index. PMID:29462966

Effect of the time of day and queue position in the endoscopic schedule on the performance characteristics of endoscopic ultrasound-guided fine-needle aspiration for diagnosing pancreatic malignancies

PubMed Central

Korenblit, Jason; Tholey, Danielle M.; Tolin, Joanna; Loren, David; Kowalski, Thomas; Adler, Douglas G.; Davolos, Julie; Siddiqui, Ali A.

2016-01-01

Background and Objectives: Recent reports have indicated that the time of day may impact the detection rate of abnormal cytology on gynecologic cytology samples. The aim of this study was to determine if procedure time or queue position affected the performance characteristics of endoscopic ultrasound-guided fine-needle aspiration (EUS-FNA) for diagnosing solid pancreatic malignancies. Patients and Methods: We conducted a retrospective study evaluating patients with solid pancreatic lesions in whom EUS-FNA was performed. Three timing variables were evaluated as surrogate markers for endoscopist fatigue: Procedure start times, morning versus afternoon procedures, and endoscopy queue position. Statistical analyses were performed to determine whether the timing variables predicted performance characteristics of EUS-FNA. Results: We identified 609 patients (mean age: 65.8 years, 52.1% males) with solid pancreatic lesions who underwent EUS-FNA. The sensitivity of EUS-FNA was 100% for procedures that started at 7 AM while cases that started at 4 PM had a sensitivity of 81%. Using start time on a continuous scale, each elapsed hour was associated with a 1.9% decrease in EUS-FNA sensitivity (P = 0.003). Similarly, a 10% reduction in EUS-FNA sensitivity was detected between morning and afternoon procedures (92% vs. 82% respectively, P = 0.0006). A linear regression comparing the procedure start time and diagnostic accuracy revealed a decrease of approximately 1.7% in procedure accuracy for every hour later a procedure was started. A 16% reduction in EUS-FNA accuracy was detected between morning and afternoon procedures (100% vs. 84% respectively, P = 0.0009). When the queue position was assessed, a 2.4% reduction in accuracy was noted for each increase in the queue position (P = 0.013). Conclusion: Sensitivity and diagnostic accuracy of EUS-FNA for solid pancreatic lesions decline with progressively later EUS starting times and increasing numbers of procedures before a given EUS, potentially from endoscopist fatigue and cytotechnologist fatigue. PMID:27080605

Rapid 3D Reconstruction for Image Sequence Acquired from UAV Camera

PubMed Central

Qu, Yufu; Huang, Jianyu; Zhang, Xuan

2018-01-01

In order to reconstruct three-dimensional (3D) structures from an image sequence captured by unmanned aerial vehicles’ camera (UAVs) and improve the processing speed, we propose a rapid 3D reconstruction method that is based on an image queue, considering the continuity and relevance of UAV camera images. The proposed approach first compresses the feature points of each image into three principal component points by using the principal component analysis method. In order to select the key images suitable for 3D reconstruction, the principal component points are used to estimate the interrelationships between images. Second, these key images are inserted into a fixed-length image queue. The positions and orientations of the images are calculated, and the 3D coordinates of the feature points are estimated using weighted bundle adjustment. With this structural information, the depth maps of these images can be calculated. Next, we update the image queue by deleting some of the old images and inserting some new images into the queue, and a structural calculation of all the images can be performed by repeating the previous steps. Finally, a dense 3D point cloud can be obtained using the depth–map fusion method. The experimental results indicate that when the texture of the images is complex and the number of images exceeds 100, the proposed method can improve the calculation speed by more than a factor of four with almost no loss of precision. Furthermore, as the number of images increases, the improvement in the calculation speed will become more noticeable. PMID:29342908

Rapid 3D Reconstruction for Image Sequence Acquired from UAV Camera.

PubMed

Qu, Yufu; Huang, Jianyu; Zhang, Xuan

2018-01-14

In order to reconstruct three-dimensional (3D) structures from an image sequence captured by unmanned aerial vehicles' camera (UAVs) and improve the processing speed, we propose a rapid 3D reconstruction method that is based on an image queue, considering the continuity and relevance of UAV camera images. The proposed approach first compresses the feature points of each image into three principal component points by using the principal component analysis method. In order to select the key images suitable for 3D reconstruction, the principal component points are used to estimate the interrelationships between images. Second, these key images are inserted into a fixed-length image queue. The positions and orientations of the images are calculated, and the 3D coordinates of the feature points are estimated using weighted bundle adjustment. With this structural information, the depth maps of these images can be calculated. Next, we update the image queue by deleting some of the old images and inserting some new images into the queue, and a structural calculation of all the images can be performed by repeating the previous steps. Finally, a dense 3D point cloud can be obtained using the depth-map fusion method. The experimental results indicate that when the texture of the images is complex and the number of images exceeds 100, the proposed method can improve the calculation speed by more than a factor of four with almost no loss of precision. Furthermore, as the number of images increases, the improvement in the calculation speed will become more noticeable.

Cost Optimal Elastic Auto-Scaling in Cloud Infrastructure

NASA Astrophysics Data System (ADS)

Mukhopadhyay, S.; Sidhanta, S.; Ganguly, S.; Nemani, R. R.

2014-12-01

Today, elastic scaling is critical part of leveraging cloud. Elastic scaling refers to adding resources only when it is needed and deleting resources when not in use. Elastic scaling ensures compute/server resources are not over provisioned. Today, Amazon and Windows Azure are the only two platform provider that allow auto-scaling of cloud resources where servers are automatically added and deleted. However, these solution falls short of following key features: A) Requires explicit policy definition such server load and therefore lacks any predictive intelligence to make optimal decision; B) Does not decide on the right size of resource and thereby does not result in cost optimal resource pool. In a typical cloud deployment model, we consider two types of application scenario: A. Batch processing jobs → Hadoop/Big Data case B. Transactional applications → Any application that process continuous transactions (Requests/response) In reference of classical queuing model, we are trying to model a scenario where servers have a price and capacity (size) and system can add delete servers to maintain a certain queue length. Classical queueing models applies to scenario where number of servers are constant. So we cannot apply stationary system analysis in this case. We investigate the following questions 1. Can we define Job queue and use the metric to define such a queue to predict the resource requirement in a quasi-stationary way? Can we map that into an optimal sizing problem? 2. Do we need to get into a level of load (CPU/Data) on server level to characterize the size requirement? How do we learn that based on Job type?

Parallel discrete event simulation using shared memory

NASA Technical Reports Server (NTRS)

Reed, Daniel A.; Malony, Allen D.; Mccredie, Bradley D.

1988-01-01

With traditional event-list techniques, evaluating a detailed discrete-event simulation-model can often require hours or even days of computation time. By eliminating the event list and maintaining only sufficient synchronization to ensure causality, parallel simulation can potentially provide speedups that are linear in the numbers of processors. A set of shared-memory experiments, using the Chandy-Misra distributed-simulation algorithm, to simulate networks of queues is presented. Parameters of the study include queueing network topology and routing probabilities, number of processors, and assignment of network nodes to processors. These experiments show that Chandy-Misra distributed simulation is a questionable alternative to sequential-simulation of most queueing network models.

Ada Quality and Style: Guidelines for Professional Programmers

DTIC Science & Technology

1991-01-01

occured because entry queues are serviced in FIFO order, not by priority. There is another situation referred to as a race condition. A program like the...the value of ’COUNT. A task can be removed from an entry queue due to execution of an abort statement as well as expiration of a timed entry call. The...is not defined by the language and may vary from time sliced to preemptive priority. Some implementations (e.g., VAX Ada) provide several choices

Competing for jobs: labor queues and gender sorting in the hiring process.

PubMed

Fernandez, Roberto M; Mors, Marie Louise

2008-12-01

While much research has documented the pattern and extent of sex segregation of workers once they are employed, few studies have addressed the pre-hire mechanisms that are posited to produce sex segregation in employment. While the notion of a labor queue-the rank order of the set of people that employers choose among-plays a prominent role in pre-hire accounts of job sex sorting mechanisms, few studies have examined the ways in which job candidates are sorted into labor queues. In this paper, we explore the mechanisms by which labor queues contribute to the gendering of jobs by studying the hiring process for all jobs at a call center. Being placed in a queue has a clear gendering effect on the hiring process: the sex distribution of applicants who are matched to queues and those who are rejected at this phase diverge, and among those assigned to queues, women are prevalent in queues for low pay, low status jobs. The screening process also contributes to the gendering of the population of hires at this firm. Females are more prevalent among hires than they are among candidates at initial queue assignment. Among high status jobs, however, males are more prevalent than females. Moreover, there are important wage implications associated with matching to queues. While there are large between-queue sex differences in the paid wages associated with allocation to queues, once allocated to queues the wage differences between male and female candidates are nil. Consequently, the roots of gender wage inequality in this setting lie in the initial sorting of candidates to labor queues.

Performance Evaluation of a M/Geo[xy]/1 Queue with varying probabilities of success which Treats Two Like Jobs As a Single Entity

NASA Astrophysics Data System (ADS)

Gowrishankar, Lavanya; Bhaskar, Vidhyacharan; Sundarammal, K.

2018-04-01

The developed model comprises of a single server capable of handling two different job types X and Y type job. Job Y takes more time for execution than job X. The objective is to construct a single server which would replace the standard M/M/2 queuing model The method used to find the relative measures involves the cost equation. The properties of the service distribution are discussed in detail. The maximum likelihood estimates for the parameters are obtained. The results are analytically derived for the M/Geo[xy]/1 model. A comparison is done between the model proposed and the standard M/M/2 queue. From the numerical results, it is observed that the waiting time in queue increases as the number of cycles is increased but however it is more economical than the M/M/2 model with restriction on the number of time slices.

Developing a cross-docking network design model under uncertain environment

NASA Astrophysics Data System (ADS)

Seyedhoseini, S. M.; Rashid, Reza; Teimoury, E.

2015-06-01

Cross-docking is a logistic concept, which plays an important role in supply chain management by decreasing inventory holding, order packing, transportation costs and delivery time. Paying attention to these concerns, and importance of the congestion in cross docks, we present a mixed-integer model to optimize the location and design of cross docks at the same time to minimize the total transportation and operating costs. The model combines queuing theory for design aspects, for that matter, we consider a network of cross docks and customers where two M/M/c queues have been represented to describe operations of indoor trucks and outdoor trucks in each cross dock. To prepare a perfect illustration for performance of the model, a real case also has been examined that indicated effectiveness of the proposed model.

Real Time Linux - The RTOS for Astronomy?

NASA Astrophysics Data System (ADS)

Daly, P. N.

The BoF was attended by about 30 participants and a free CD of real time Linux-based upon RedHat 5.2-was available. There was a detailed presentation on the nature of real time Linux and the variants for hard real time: New Mexico Tech's RTL and DIAPM's RTAI. Comparison tables between standard Linux and real time Linux responses to time interval generation and interrupt response latency were presented (see elsewhere in these proceedings). The present recommendations are to use RTL for UP machines running the 2.0.x kernels and RTAI for SMP machines running the 2.2.x kernel. Support, both academically and commercially, is available. Some known limitations were presented and the solutions reported e.g., debugging and hardware support. The features of RTAI (scheduler, fifos, shared memory, semaphores, message queues and RPCs) were described. Typical performance statistics were presented: Pentium-based oneshot tasks running > 30kHz, 486-based oneshot tasks running at ~ 10 kHz, periodic timer tasks running in excess of 90 kHz with average zero jitter peaking to ~ 13 mus (UP) and ~ 30 mus (SMP). Some detail on kernel module programming, including coding examples, were presented showing a typical data acquisition system generating simulated (random) data writing to a shared memory buffer and a fifo buffer to communicate between real time Linux and user space. All coding examples were complete and tested under RTAI v0.6 and the 2.2.12 kernel. Finally, arguments were raised in support of real time Linux: it's open source, free under GPL, enables rapid prototyping, has good support and the ability to have a fully functioning workstation capable of co-existing hard real time performance. The counter weight-the negatives-of lack of platforms (x86 and PowerPC only at present), lack of board support, promiscuous root access and the danger of ignorance of real time programming issues were also discussed. See ftp://orion.tuc.noao.edu/pub/pnd/rtlbof.tgz for the StarOffice overheads for this presentation.

On buffer overflow duration in a finite-capacity queueing system with multiple vacation policy

NASA Astrophysics Data System (ADS)

Kempa, Wojciech M.

2017-12-01

A finite-buffer queueing system with Poisson arrivals and generally distributed processing times, operating under multiple vacation policy, is considered. Each time when the system becomes empty, the service station takes successive independent and identically distributed vacation periods, until, at the completion epoch of one of them, at least one job waiting for service is detected in the buffer. Applying analytical approach based on the idea of embedded Markov chain, integral equations and linear algebra, the compact-form representation for the cumulative distribution function (CDF for short) of the first buffer overflow duration is found. Hence, the formula for the CDF of next such periods is obtained. Moreover, probability distributions of the number of job losses in successive buffer overflow periods are found. The considered queueing system can be efficienly applied in modelling energy saving mechanisms in wireless network communication.

The WorkQueue project - a task queue for the CMS workload management system

NASA Astrophysics Data System (ADS)

Ryu, S.; Wakefield, S.

2012-12-01

We present the development and first experience of a new component (termed WorkQueue) in the CMS workload management system. This component provides a link between a global request system (Request Manager) and agents (WMAgents) which process requests at compute and storage resources (known as sites). These requests typically consist of creation or processing of a data sample (possibly terabytes in size). Unlike the standard concept of a task queue, the WorkQueue does not contain fully resolved work units (known typically as jobs in HEP). This would require the WorkQueue to run computationally heavy algorithms that are better suited to run in the WMAgents. Instead the request specifies an algorithm that the WorkQueue uses to split the request into reasonable size chunks (known as elements). An advantage of performing lazy evaluation of an element is that expanding datasets can be accommodated by having job details resolved as late as possible. The WorkQueue architecture consists of a global WorkQueue which obtains requests from the request system, expands them and forms an element ordering based on the request priority. Each WMAgent contains a local WorkQueue which buffers work close to the agent, this overcomes temporary unavailability of the global WorkQueue and reduces latency for an agent to begin processing. Elements are pulled from the global WorkQueue to the local WorkQueue and into the WMAgent based on the estimate of the amount of work within the element and the resources available to the agent. WorkQueue is based on CouchDB, a document oriented NoSQL database. The WorkQueue uses the features of CouchDB (map/reduce views and bi-directional replication between distributed instances) to provide a scalable distributed system for managing large queues of work. The project described here represents an improvement over the old approach to workload management in CMS which involved individual operators feeding requests into agents. This new approach allows for a system where individual WMAgents are transient and can be added or removed from the system as needed.

A queueing theory description of fat-tailed price returns in imperfect financial markets

NASA Astrophysics Data System (ADS)

Lamba, H.

2010-09-01

In a financial market, for agents with long investment horizons or at times of severe market stress, it is often changes in the asset price that act as the trigger for transactions or shifts in investment position. This suggests the use of price thresholds to simulate agent behavior over much longer timescales than are currently used in models of order-books. We show that many phenomena, routinely ignored in efficient market theory, can be systematically introduced into an otherwise efficient market, resulting in models that robustly replicate the most important stylized facts. We then demonstrate a close link between such threshold models and queueing theory, with large price changes corresponding to the busy periods of a single-server queue. The distribution of the busy periods is known to have excess kurtosis and non-exponential decay under various assumptions on the queue parameters. Such an approach may prove useful in the development of mathematical models for rapid deleveraging and panics in financial markets, and the stress-testing of financial institutions.

An energy-efficient MAC protocol using dynamic queue management for delay-tolerant mobile sensor networks.

PubMed

Li, Jie; Li, Qiyue; Qu, Yugui; Zhao, Baohua

2011-01-01

Conventional MAC protocols for wireless sensor network perform poorly when faced with a delay-tolerant mobile network environment. Characterized by a highly dynamic and sparse topology, poor network connectivity as well as data delay-tolerance, delay-tolerant mobile sensor networks exacerbate the severe power constraints and memory limitations of nodes. This paper proposes an energy-efficient MAC protocol using dynamic queue management (EQ-MAC) for power saving and data queue management. Via data transfers initiated by the target sink and the use of a dynamic queue management strategy based on priority, EQ-MAC effectively avoids untargeted transfers, increases the chance of successful data transmission, and makes useful data reach the target terminal in a timely manner. Experimental results show that EQ-MAC has high energy efficiency in comparison with a conventional MAC protocol. It also achieves a 46% decrease in packet drop probability, 79% increase in system throughput, and 25% decrease in mean packet delay.

An Energy-Efficient MAC Protocol Using Dynamic Queue Management for Delay-Tolerant Mobile Sensor Networks

PubMed Central

Li, Jie; Li, Qiyue; Qu, Yugui; Zhao, Baohua

2011-01-01

Conventional MAC protocols for wireless sensor network perform poorly when faced with a delay-tolerant mobile network environment. Characterized by a highly dynamic and sparse topology, poor network connectivity as well as data delay-tolerance, delay-tolerant mobile sensor networks exacerbate the severe power constraints and memory limitations of nodes. This paper proposes an energy-efficient MAC protocol using dynamic queue management (EQ-MAC) for power saving and data queue management. Via data transfers initiated by the target sink and the use of a dynamic queue management strategy based on priority, EQ-MAC effectively avoids untargeted transfers, increases the chance of successful data transmission, and makes useful data reach the target terminal in a timely manner. Experimental results show that EQ-MAC has high energy efficiency in comparison with a conventional MAC protocol. It also achieves a 46% decrease in packet drop probability, 79% increase in system throughput, and 25% decrease in mean packet delay. PMID:22319385

Reducing queues: demand and capacity variations.

PubMed

Eriksson, Henrik; Bergbrant, Ing-Marie; Berrum, Ingela; Mörck, Boel

2011-01-01

The aim of this paper is to investigate how waiting lists or queues could be reduced without adding more resources; and to describe what factors sustain reduced waiting-times. Cases were selected according to successful and sustained queue reduction. The approach in this study is action research. Accessibility improved as out-patient waiting lists for two clinics were reduced. The main success was working towards matching demand and capacity. It has been possible to sustain the improvements. Results should be viewed cautiously. Transferring and generalizing outcomes from this study is for readers to consider. However, accessible healthcare may be possible by paying more attention to existing solutions. The study indicates that queue reduction activities should include acquiring knowledge about theories and methods to improve accessibility, finding ways to monitor varying demand and capacity, and to improve patient processing by reducing variations. Accessibility is considered an important dimension when measuring service quality. However, there are few articles on how clinic staff sustain reduces waiting lists. This paper contributes accessible knowledge to the field.

Empirical analysis and modeling of manual turnpike tollbooths in China

NASA Astrophysics Data System (ADS)

Zhang, Hao

2017-03-01

To deal with low-level of service satisfaction at tollbooths of many turnpikes in China, we conduct an empirical study and use a queueing model to investigate performance measures. In this paper, we collect archived data from six tollbooths of a turnpike in China. Empirical analysis on vehicle's time-dependent arrival process and collector's time-dependent service time is conducted. It shows that the vehicle arrival process follows a non-homogeneous Poisson process while the collector service time follows a log-normal distribution. Further, we model the process of collecting tolls at tollbooths with MAP / PH / 1 / FCFS queue for mathematical tractability and present some numerical examples.

Why Are Drugs So Hard to Quit?

MedlinePlus

... Loading... Close Yeah, keep it Undo Close This video is unavailable. Watch Queue Queue Watch Queue Queue ... in Share More Report Need to report the video? Sign in to report inappropriate content. Sign in ...

A Low-Power Instruction Issue Queue for Microprocessors

NASA Astrophysics Data System (ADS)

Watanabe, Shingo; Chiyonobu, Akihiro; Sato, Toshinori

Instruction issue queue is a key component which extracts instruction level parallelism (ILP) in modern out-of-order microprocessors. In order to exploit ILP for improving processor performance, instruction queue size should be increased. However, it is difficult to increase the size, since instruction queue is implemented by a content addressable memory (CAM) whose power and delay are much large. This paper introduces a low power and scalable instruction queue that replaces the CAM with a RAM. In this queue, instructions are explicitly woken up. Evaluation results show that the proposed instruction queue decreases processor performance by only 1.9% on average. Furthermore, the total energy consumption is reduced by 54% on average.

Demonstration of a real-time interferometer as a bunch-length monitor in a high-current electron beam accelerator.

PubMed

Thangaraj, J; Andonian, G; Thurman-Keup, R; Ruan, J; Johnson, A S; Lumpkin, A; Santucci, J; Maxwell, T; Murokh, A; Ruelas, M; Ovodenko, A

2012-04-01

A real-time interferometer (RTI) has been developed to monitor the bunch length of an electron beam in an accelerator. The RTI employs spatial autocorrelation, reflective optics, and a fast response pyro-detector array to obtain a real-time autocorrelation trace of the coherent radiation from an electron beam thus providing the possibility of online bunch-length diagnostics. A complete RTI system has been commissioned at the A0 photoinjector facility to measure sub-mm bunches at 13 MeV. Bunch length variation (FWHM) between 0.8 ps (~0.24 mm) and 1.5 ps (~0.45 mm) has been measured and compared with a Martin-Puplett interferometer and a streak camera. The comparisons show that RTI is a viable, complementary bunch length diagnostic for sub-mm electron bunches. © 2012 American Institute of Physics

Demonstration of a real-time interferometer as a bunch-length monitor in a high-current electron beam accelerator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thangaraj, J.; Thurman-Keup, R.; Ruan, J.

2012-04-15

A real-time interferometer (RTI) has been developed to monitor the bunch length of an electron beam in an accelerator. The RTI employs spatial autocorrelation, reflective optics, and a fast response pyro-detector array to obtain a real-time autocorrelation trace of the coherent radiation from an electron beam thus providing the possibility of online bunch-length diagnostics. A complete RTI system has been commissioned at the A0 photoinjector facility to measure sub-mm bunches at 13 MeV. Bunch length variation (FWHM) between 0.8 ps ({approx}0.24 mm) and 1.5 ps ({approx}0.45 mm) has been measured and compared with a Martin-Puplett interferometer and a streak camera.more » The comparisons show that RTI is a viable, complementary bunch length diagnostic for sub-mm electron bunches.« less

Generalized Monitoring Facility. Users Manual.

DTIC Science & Technology

1982-05-01

based monitor. The RMC will sample system queues and tables on a 30-second time interval. The data captured from these queues and cells are written...period, only the final change will be reported. The following communication region cells are constantly monitored for changes, since a processor...is reported as zeros in WW6.4. When GMC terminates, it writes a record containing information read from communication region cells and information

Priority Queue Based Reactive Buffer Management Policy for Delay Tolerant Network under City Based Environments.

PubMed

Ayub, Qaisar; Ngadi, Asri; Rashid, Sulma; Habib, Hafiz Adnan

2018-01-01

Delay Tolerant Network (DTN) multi-copy routing protocols are privileged to create and transmit multiple copies of each message that causes congestion and some messages are dropped. This process is known as reactive drop because messages were dropped re-actively to overcome buffer overflows. The existing reactive buffer management policies apply a single metric to drop source, relay and destine messages. Hereby, selection to drop a message is dubious because each message as source, relay or destine may have consumed dissimilar magnitude of network resources. Similarly, DTN has included time to live (ttl) parameter which defines lifetime of message. Hence, when ttl expires then message is automatically destroyed from relay nodes. However, time-to-live (ttl) is not applicable on messages reached at their destinations. Moreover, nodes keep replicating messages till ttl expires even-though large number of messages has already been dispersed. In this paper, we have proposed Priority Queue Based Reactive Buffer Management Policy (PQB-R) for DTN under City Based Environments. The PQB-R classifies buffered messages into source, relay and destine queues. Moreover, separate drop metric has been applied on individual queue. The experiment results prove that proposed PQB-R has reduced number of messages transmissions, message drop and increases delivery ratio.

Priority Queue Based Reactive Buffer Management Policy for Delay Tolerant Network under City Based Environments

PubMed Central

Ngadi, Asri; Rashid, Sulma; Habib, Hafiz Adnan

2018-01-01

Delay Tolerant Network (DTN) multi-copy routing protocols are privileged to create and transmit multiple copies of each message that causes congestion and some messages are dropped. This process is known as reactive drop because messages were dropped re-actively to overcome buffer overflows. The existing reactive buffer management policies apply a single metric to drop source, relay and destine messages. Hereby, selection to drop a message is dubious because each message as source, relay or destine may have consumed dissimilar magnitude of network resources. Similarly, DTN has included time to live (ttl) parameter which defines lifetime of message. Hence, when ttl expires then message is automatically destroyed from relay nodes. However, time-to-live (ttl) is not applicable on messages reached at their destinations. Moreover, nodes keep replicating messages till ttl expires even-though large number of messages has already been dispersed. In this paper, we have proposed Priority Queue Based Reactive Buffer Management Policy (PQB-R) for DTN under City Based Environments. The PQB-R classifies buffered messages into source, relay and destine queues. Moreover, separate drop metric has been applied on individual queue. The experiment results prove that proposed PQB-R has reduced number of messages transmissions, message drop and increases delivery ratio. PMID:29438438

A Simulation Study of Paced TCP

NASA Technical Reports Server (NTRS)

Kulik, Joanna; Coulter, Robert; Rockwell, Dennis; Partridge, Craig

2000-01-01

In this paper, we study the performance of paced TCP, a modified version of TCP designed especially for high delay- bandwidth networks. In typical networks, TCP optimizes its send-rate by transmitting increasingly large bursts, or windows, of packets, one burst per round-trip time, until it reaches a maximum window-size, which corresponds to the full capacity of the network. In a network with a high delay-bandwidth product, however, Transmission Control Protocol's (TCPs) maximum window-size may be larger than the queue size of the intermediate routers, and routers will begin to drop packets as soon as the windows become too large for the router queues. The TCP sender then concludes that the bottleneck capacity of the network has been reached, and it limits its send-rate accordingly. Partridge proposed paced TCP as a means of solving the problem of queueing bottlenecks. A sender using paced TCP would release packets in multiple, small bursts during a round-trip time in which ordinary TCP would release a single, large burst of packets. This approach allows the sender to increase its send-rate to the maximum window size without encountering queueing bottlenecks. This paper describes the performance of paced TCP in a simulated network and discusses implementation details that can affect the performance of paced TCP.

Pathogen transfer through environment-host contact: an agent-based queueing theoretic framework.

PubMed

Chen, Shi; Lenhart, Suzanne; Day, Judy D; Lee, Chihoon; Dulin, Michael; Lanzas, Cristina

2017-11-02

Queueing theory studies the properties of waiting queues and has been applied to investigate direct host-to-host transmitted disease dynamics, but its potential in modelling environmentally transmitted pathogens has not been fully explored. In this study, we provide a flexible and customizable queueing theory modelling framework with three major subroutines to study the in-hospital contact processes between environments and hosts and potential nosocomial pathogen transfer, where environments are servers and hosts are customers. Two types of servers with different parameters but the same utilization are investigated. We consider various forms of transfer functions that map contact duration to the amount of pathogen transfer based on existing literature. We propose a case study of simulated in-hospital contact processes and apply stochastic queues to analyse the amount of pathogen transfer under different transfer functions, and assume that pathogen amount decreases during the inter-arrival time. Different host behaviour (feedback and non-feedback) as well as initial pathogen distribution (whether in environment and/or in hosts) are also considered and simulated. We assess pathogen transfer and circulation under these various conditions and highlight the importance of the nonlinear interactions among contact processes, transfer functions and pathogen demography during the contact process. Our modelling framework can be readily extended to more complicated queueing networks to simulate more realistic situations by adjusting parameters such as the number and type of servers and customers, and adding extra subroutines. © The authors 2017. Published by Oxford University Press on behalf of the Institute of Mathematics and its Applications. All rights reserved.

The willingness to pay for wait reduction: the disutility of queues for cataract surgery in Canada, Denmark, and Spain.

PubMed

Bishai, D M; Lang, H C

2000-03-01

We estimate demand curves for a one month reduction in waiting time for cataract surgery based on survey data collected in 1992 in Manitoba, Barcelona, and Denmark. Patients answered, "Would you be willing to pay [Bid, B] to reduce your waiting time for cataract surgery to less than one month?" Controlling for SES and visual status, Barcelonan patients have greater WTP for shortened waiting time than the Danes and Manitobans. We estimate the value (in 1992 $) of lost consumer surplus due to the cataract surgery queue at $128 per patient in Manitoba, $160 in Denmark, and $243 in Barcelona.

Random early detection for congestion avoidance in wired networks: a discretized pursuit learning-automata-like solution.

PubMed

Misra, Sudip; Oommen, B John; Yanamandra, Sreekeerthy; Obaidat, Mohammad S

2010-02-01

In this paper, we present a learning-automata-like The reason why the mechanism is not a pure LA, but rather why it yet mimics one, will be clarified in the body of this paper. (LAL) mechanism for congestion avoidance in wired networks. Our algorithm, named as LAL Random Early Detection (LALRED), is founded on the principles of the operations of existing RED congestion-avoidance mechanisms, augmented with a LAL philosophy. The primary objective of LALRED is to optimize the value of the average size of the queue used for congestion avoidance and to consequently reduce the total loss of packets at the queue. We attempt to achieve this by stationing a LAL algorithm at the gateways and by discretizing the probabilities of the corresponding actions of the congestion-avoidance algorithm. At every time instant, the LAL scheme, in turn, chooses the action that possesses the maximal ratio between the number of times the chosen action is rewarded and the number of times that it has been chosen. In LALRED, we simultaneously increase the likelihood of the scheme converging to the action, which minimizes the number of packet drops at the gateway. Our approach helps to improve the performance of congestion avoidance by adaptively minimizing the queue-loss rate and the average queue size. Simulation results obtained using NS2 establish the improved performance of LALRED over the traditional RED methods which were chosen as the benchmarks for performance comparison purposes.

Control of Entry to a Queueing System

DTIC Science & Technology

1979-11-01

being devoted to the use of queueing theory to control ard optimize the o~peration i f a system. Here, queueing analyses are used to design a system...operpting costs below somae upper bound while maximizing throughput of the queue. This more recent approach of designing or controlling a queueing system...ports designated as high density traffic airports, the Federal Aviation Administration (FAA) limits the number of instrument flight r’ule (IFR

The network queueing system

NASA Technical Reports Server (NTRS)

Kingsbury, Brent K.

1986-01-01

Described is the implementation of a networked, UNIX based queueing system developed on contract for NASA. The system discussed supports both batch and device requests, and provides the facilities of remote queueing, request routing, remote status, queue access controls, batch request resource quota limits, and remote output return.

Transient modeling in simulation of hospital operations for emergency response.

PubMed

Paul, Jomon Aliyas; George, Santhosh K; Yi, Pengfei; Lin, Li

2006-01-01

Rapid estimates of hospital capacity after an event that may cause a disaster can assist disaster-relief efforts. Due to the dynamics of hospitals, following such an event, it is necessary to accurately model the behavior of the system. A transient modeling approach using simulation and exponential functions is presented, along with its applications in an earthquake situation. The parameters of the exponential model are regressed using outputs from designed simulation experiments. The developed model is capable of representing transient, patient waiting times during a disaster. Most importantly, the modeling approach allows real-time capacity estimation of hospitals of various sizes and capabilities. Further, this research is an analysis of the effects of priority-based routing of patients within the hospital and the effects on patient waiting times determined using various patient mixes. The model guides the patients based on the severity of injuries and queues the patients requiring critical care depending on their remaining survivability time. The model also accounts the impact of prehospital transport time on patient waiting time.

Fast concurrent array-based stacks, queues and deques using fetch-and-increment-bounded, fetch-and-decrement-bounded and store-on-twin synchronization primitives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Dong; Gara, Alana; Heidelberger, Philip

Implementation primitives for concurrent array-based stacks, queues, double-ended queues (deques) and wrapped deques are provided. In one aspect, each element of the stack, queue, deque or wrapped deque data structure has its own ticket lock, allowing multiple threads to concurrently use multiple elements of the data structure and thus achieving high performance. In another aspect, new synchronization primitives FetchAndIncrementBounded (Counter, Bound) and FetchAndDecrementBounded (Counter, Bound) are implemented. These primitives can be implemented in hardware and thus promise a very fast throughput for queues, stacks and double-ended queues.

A microprocessor based high speed packet switch for satellite communications

NASA Technical Reports Server (NTRS)

Arozullah, M.; Crist, S. C.

1980-01-01

The architectures of a single processor, a three processor, and a multiple processor system are described. The hardware circuits, and software routines required for implementing the three and multiple processor designs are presented. A bit-slice microprocessor was designed and microprogrammed. Maximum throughput was calculated for all three designs. Queue theoretic models for these three designs were developed and utilized to obtain analytical expressions for the average waiting times, overall average response times and average queue sizes. From these expressions, graphs were obtained showing the effect on the system performance of a number of design parameters.

An optimal general type-2 fuzzy controller for Urban Traffic Network.

PubMed

Khooban, Mohammad Hassan; Vafamand, Navid; Liaghat, Alireza; Dragicevic, Tomislav

2017-01-01

Urban traffic network model is illustrated by state-charts and object-diagram. However, they have limitations to show the behavioral perspective of the Traffic Information flow. Consequently, a state space model is used to calculate the half-value waiting time of vehicles. In this study, a combination of the general type-2 fuzzy logic sets and the Modified Backtracking Search Algorithm (MBSA) techniques are used in order to control the traffic signal scheduling and phase succession so as to guarantee a smooth flow of traffic with the least wait times and average queue length. The parameters of input and output membership functions are optimized simultaneously by the novel heuristic algorithm MBSA. A comparison is made between the achieved results with those of optimal and conventional type-1 fuzzy logic controllers. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

Message passing with queues and channels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dozsa, Gabor J; Heidelberger, Philip; Kumar, Sameer

In an embodiment, a send thread receives an identifier that identifies a destination node and a pointer to data. The send thread creates a first send request in response to the receipt of the identifier and the data pointer. The send thread selects a selected channel from among a plurality of channels. The selected channel comprises a selected hand-off queue and an identification of a selected message unit. Each of the channels identifies a different message unit. The selected hand-off queue is randomly accessible. If the selected hand-off queue contains an available entry, the send thread adds the first sendmore » request to the selected hand-off queue. If the selected hand-off queue does not contain an available entry, the send thread removes a second send request from the selected hand-off queue and sends the second send request to the selected message unit.« less

Waiting to see the doctor. The impact of organizational structure on medical practice.

PubMed

Wolinsky, F D; Marder, W D

1983-05-01

In this article it is assessed whether or not the scheduling and office visit queues a patient faces depend upon the organizational structure of the physician's practice (i.e., does the physician practice in the fee-for-service system or in a health maintenance organization [HMO], and if in an HMO, in what type of an HMO). Data pooled from two national studies (N = 2448) reveal two major findings. First, although scheduling queues may be predicted from the organizational structure of physicians' practices and other factors, office queues appear to be more of a random phenomenon. Second, a distinct pattern emerges among the effects of the organizational structure of physicians' practices on patient queues, including 1) physicians in solo practice offer their patients the shortest queues, 2) physicians in group model HMOs maximize scheduling queues but minimize waiting room queues, 3) patient queues for physicians practicing in IPAs are no different from those of their counterparts in group-practice fee-for-service settings, and 4) patient queues for salaried physicians practicing in a predominantly salaried environment are among the longest. The implications of these findings are discussed with special reference to extent and future studies of the effects of organizational structure on medical practice.

Demonstration of a real-time interferometer as a bunch-lenght monitor in a high-current electron beam accelerator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thangaraj, J.; Thurman-Keup, R.; Ruan, J.

2012-03-01

A real-time interferometer (RTI) has been developed to monitor the bunch length of an electron beam in an accelerator. The RTI employs spatial autocorrelation, reflective optics, and a fast response pyro-detector array to obtain a real-time autocorrelation trace of the coherent radiation from an electron beam thus providing the possibility of online bunch-length diagnostics. A complete RTI system has been commissioned at the A0 photoinjector facility to measure sub-mm bunches at 13 MeV. Bunch length variation (FWHM) between 0.8 ps (-0.24 mm) and 1.5 ps (-0.45 mm) has been measured and compared with a Martin-Puplett interferometer and a streak camera.more » The comparisons show that RTI is a viable, complementary bunch length diagnostic for sub-mm electron bunches.« less

Network resiliency through memory health monitoring and proactive management

DOEpatents

Andrade Costa, Carlos H.; Cher, Chen-Yong; Park, Yoonho; Rosenburg, Bryan S.; Ryu, Kyung D.

2017-11-21

A method for managing a network queue memory includes receiving sensor information about the network queue memory, predicting a memory failure in the network queue memory based on the sensor information, and outputting a notification through a plurality of nodes forming a network and using the network queue memory, the notification configuring communications between the nodes.

Medical ethics and new public management in Sweden.

PubMed

Hansson, Sven Ove

2014-07-01

In order to shorten queues to healthcare, the Swedish government has introduced a yearly "queue billion" that is paid out to the county councils in proportion to how successful they are in reducing queues. However, only the queues for first visits are covered. Evidence has accumulated that queues for return visits have become longer. This affects the chronically and severely ill. Swedish physicians, and the Swedish Medical Association, have strongly criticized the queue billion and have claimed that it conflicts with medical ethics. Instead they demand that their professional judgments on priority setting and medical urgency be respected. This discussion provides an interesting illustration of some of the limitations of new public management and also more generally of the complicated relationships between medical ethics and public policy.

Priority Queues for Computer Simulations

NASA Technical Reports Server (NTRS)

Steinman, Jeffrey S. (Inventor)

1998-01-01

The present invention is embodied in new priority queue data structures for event list management of computer simulations, and includes a new priority queue data structure and an improved event horizon applied to priority queue data structures. ne new priority queue data structure is a Qheap and is made out of linked lists for robust, fast, reliable, and stable event list management and uses a temporary unsorted list to store all items until one of the items is needed. Then the list is sorted, next, the highest priority item is removed, and then the rest of the list is inserted in the Qheap. Also, an event horizon is applied to binary tree and splay tree priority queue data structures to form the improved event horizon for event management.

Characterization, adaptive traffic shaping, and multiplexing of real-time MPEG II video

NASA Astrophysics Data System (ADS)

Agrawal, Sanjay; Barry, Charles F.; Binnai, Vinay; Kazovsky, Leonid G.

1997-01-01

We obtain network traffic model for real-time MPEG-II encoded digital video by analyzing video stream samples from real-time encoders from NUKO Information Systems. MPEG-II sample streams include a resolution intensive movie, City of Joy, an action intensive movie, Aliens, a luminance intensive (black and white) movie, Road To Utopia, and a chrominance intensive (color) movie, Dick Tracy. From our analysis we obtain a heuristic model for the encoded video traffic which uses a 15-stage Markov process to model the I,B,P frame sequences within a group of pictures (GOP). A jointly-correlated Gaussian process is used to model the individual frame sizes. Scene change arrivals are modeled according to a gamma process. Simulations show that our MPEG-II traffic model generates, I,B,P frame sequences and frame sizes that closely match the sample MPEG-II stream traffic characteristics as they relate to latency and buffer occupancy in network queues. To achieve high multiplexing efficiency we propose a traffic shaping scheme which sets preferred 1-frame generation times among a group of encoders so as to minimize the overall variation in total offered traffic while still allowing the individual encoders to react to scene changes. Simulations show that our scheme results in multiplexing gains of up to 10% enabling us to multiplex twenty 6 Mbps MPEG-II video streams instead of 18 streams over an ATM/SONET OC3 link without latency or cell loss penalty. This scheme is due for a patent.

An automatic detection method for the boiler pipe header based on real-time image acquisition

NASA Astrophysics Data System (ADS)

Long, Yi; Liu, YunLong; Qin, Yongliang; Yang, XiangWei; Li, DengKe; Shen, DingJie

2017-06-01

Generally, an endoscope is used to test the inner part of the thermal power plants boiler pipe header. However, since the endoscope hose manual operation, the length and angle of the inserted probe cannot be controlled. Additionally, it has a big blind spot observation subject to the length of the endoscope wire. To solve these problems, an automatic detection method for the boiler pipe header based on real-time image acquisition and simulation comparison techniques was proposed. The magnetic crawler with permanent magnet wheel could carry the real-time image acquisition device to complete the crawling work and collect the real-time scene image. According to the obtained location by using the positioning auxiliary device, the position of the real-time detection image in a virtual 3-D model was calibrated. Through comparing of the real-time detection images and the computer simulation images, the defects or foreign matter fall into could be accurately positioning, so as to repair and clean up conveniently.

Enhanced round robin CPU scheduling with burst time based time quantum

NASA Astrophysics Data System (ADS)

Indusree, J. R.; Prabadevi, B.

2017-11-01

Process scheduling is a very important functionality of Operating system. The main-known process-scheduling algorithms are First Come First Serve (FCFS) algorithm, Round Robin (RR) algorithm, Priority scheduling algorithm and Shortest Job First (SJF) algorithm. Compared to its peers, Round Robin (RR) algorithm has the advantage that it gives fair share of CPU to the processes which are already in the ready-queue. The effectiveness of the RR algorithm greatly depends on chosen time quantum value. Through this research paper, we are proposing an enhanced algorithm called Enhanced Round Robin with Burst-time based Time Quantum (ERRBTQ) process scheduling algorithm which calculates time quantum as per the burst-time of processes already in ready queue. The experimental results and analysis of ERRBTQ algorithm clearly indicates the improved performance when compared with conventional RR and its variants.

A new intuitionistic fuzzy rule-based decision-making system for an operating system process scheduler.

PubMed

Butt, Muhammad Arif; Akram, Muhammad

2016-01-01

We present a new intuitionistic fuzzy rule-based decision-making system based on intuitionistic fuzzy sets for a process scheduler of a batch operating system. Our proposed intuitionistic fuzzy scheduling algorithm, inputs the nice value and burst time of all available processes in the ready queue, intuitionistically fuzzify the input values, triggers appropriate rules of our intuitionistic fuzzy inference engine and finally calculates the dynamic priority (dp) of all the processes in the ready queue. Once the dp of every process is calculated the ready queue is sorted in decreasing order of dp of every process. The process with maximum dp value is sent to the central processing unit for execution. Finally, we show complete working of our algorithm on two different data sets and give comparisons with some standard non-preemptive process schedulers.

Ammunition Resupply Model. Volume II. Programmers Manual.

DTIC Science & Technology

1980-03-01

pointer tables. If the placement is successful the flag ( ICHECK ) is set equal to 1. COMMON BLOCKS: EVENTS CALLS: NONE IS CALLED BY: SCHED CALLING PARAMETERS...decimal portion of the event time multiplied by 3600. ICHECK - 0 if no room on the file, I if there is room on the file. LOCAL ARRAYS: JFORE (1024...8217EVT, ITH, I-IS, !CHECK) C PUTEVT PLACES AN EVENT RECORD IN -THE QUEUE IN CHRONOLOGICAL C ORDER A,1D UPDATES THE QUEUE DIRECTORY. ICHECK FLAG SET C IF

Bridging the Semantic Gap Between Heterogeneous Modeling Formalisms and FMI

DTIC Science & Technology

2014-04-25

Naval Research Laboratory (NRL #N0013-12-1-G015), and the following companies: Bosch, National Instruments, and Toyota ). 1 of contract, these two...but only on the interconnections of the FMUs in the network). To our knowledge , the question how to create FMUs has not been formally addressed. This...unbounded length. The main characteristic of SDF is that the number of tokens that each actor consumes from its input queues and produces to its output

Online Tracking Algorithms on GPUs for the P̅ANDA Experiment at FAIR

NASA Astrophysics Data System (ADS)

Bianchi, L.; Herten, A.; Ritman, J.; Stockmanns, T.; Adinetz, A.; Kraus, J.; Pleiter, D.

2015-12-01

P̅ANDA is a future hadron and nuclear physics experiment at the FAIR facility in construction in Darmstadt, Germany. In contrast to the majority of current experiments, PANDA's strategy for data acquisition is based on event reconstruction from free-streaming data, performed in real time entirely by software algorithms using global detector information. This paper reports the status of the development of algorithms for the reconstruction of charged particle tracks, optimized online data processing applications, using General-Purpose Graphic Processing Units (GPU). Two algorithms for trackfinding, the Triplet Finder and the Circle Hough, are described, and details of their GPU implementations are highlighted. Average track reconstruction times of less than 100 ns are obtained running the Triplet Finder on state-of- the-art GPU cards. In addition, a proof-of-concept system for the dispatch of data to tracking algorithms using Message Queues is presented.

Load-sensitive dynamic workflow re-orchestration and optimisation for faster patient healthcare.

PubMed

Meli, Christopher L; Khalil, Ibrahim; Tari, Zahir

2014-01-01

Hospital waiting times are considerably long, with no signs of reducing any-time soon. A number of factors including population growth, the ageing population and a lack of new infrastructure are expected to further exacerbate waiting times in the near future. In this work, we show how healthcare services can be modelled as queueing nodes, together with healthcare service workflows, such that these workflows can be optimised during execution in order to reduce patient waiting times. Services such as X-ray, computer tomography, and magnetic resonance imaging often form queues, thus, by taking into account the waiting times of each service, the workflow can be re-orchestrated and optimised. Experimental results indicate average waiting time reductions are achievable by optimising workflows using dynamic re-orchestration. Crown Copyright © 2013. Published by Elsevier Ireland Ltd. All rights reserved.

Marine Vessel Traffic System

DTIC Science & Technology

2001-06-19

Queue Get Put The MutexQ module provides primitive queue operations which synchronize access to the queues and ensure queue structure integrity...interface provides for synchronous data rates ranging from 64 Kbps to 1.536 Mbps, while an RS-232 interface accommodates asynchronous data up to...interface VME Communications processor 57 and 8-channel serial I/O board. This board set provides a 68040 processor and 8-channels of synchronous

Using Hybrid Simulation/Analytical Queueing Networks to Capacitate USAF Air Mobility Command Passenger Terminals

DTIC Science & Technology

2012-03-01

Simulation Simulation is a flexible tool for modeling airport operations , which has made the method a staple for airport systems analysts. Animation...be derived to define the character- istics of the airport terminal and describe the nature of the systems [sic] operation ”, which makes discrete...This system decomposition method, however, disregards the effects of network structure on performance measures. Real-life processes do not operate

The N-policy for an unreliable server with delaying repair and two phases of service

NASA Astrophysics Data System (ADS)

Choudhury, Gautam; Ke, Jau-Chuan; Tadj, Lotfi

2009-09-01

This paper deals with an MX/G/1 with an additional second phase of optional service and unreliable server, which consist of a breakdown period and a delay period under N-policy. While the server is working with any phase of service, it may break down at any instant and the service channel will fail for a short interval of time. Further concept of the delay time is also introduced. If no customer arrives during the breakdown period, the server becomes idle in the system until the queue size builds up to a threshold value . As soon as the queue size becomes at least N, the server immediately begins to serve the first phase of regular service to all the waiting customers. After the completion of which, only some of them receive the second phase of the optional service. We derive the queue size distribution at a random epoch and departure epoch as well as various system performance measures. Finally we derive a simple procedure to obtain optimal stationary policy under a suitable linear cost structure.

The design and implementation of multi-source application middleware based on service bus

NASA Astrophysics Data System (ADS)

Li, Yichun; Jiang, Ningkang

2017-06-01

With the rapid development of the Internet of Things(IoT), the real-time monitoring data are increasing with different types and large amounts. Aiming at taking full advantages of the data, we designed and implemented an application middleware, which not only supports the three-layer architecture of IoT information system but also enables the flexible configuration of multiple resources access and other accessional modules. The middleware platform shows the characteristics of lightness, security, AoP (aspect-oriented programming), distribution and real-time, which can let application developers construct the information processing systems on related areas in a short period. It focuses not limited to these functions: pre-processing of data format, the definition of data entity, the callings and handlings of distributed service and massive data process. The result of experiment shows that the performance of middleware is more excellent than some message queue construction to some degree and its throughput grows better as the number of distributed nodes increases while the code is not complex. Currently, the middleware is applied to the system of Shanghai Pudong environmental protection agency and achieved a great success.

Cooperative and Integrated Vehicle and Intersection Control for Energy Efficiency (CIVIC-E²)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hou, Yunfei; Seliman, Salaheldeen M. S.; Wang, Enshu

Recent advances in connected vehicle technologies enable vehicles and signal controllers to cooperate and improve the traffic management at intersections. This paper explores the opportunity for cooperative and integrated vehicle and intersection control for energy efficiency (CIVIC-E 2) to contribute to a more sustainable transportation system. We propose a two-level approach that jointly optimizes the traffic signal timing and vehicles' approach speed, with the objective being to minimize total energy consumption for all vehicles passing through an isolated intersection. More specifically, at the intersection level, a dynamic programming algorithm is designed to find the optimal signal timing by explicitly consideringmore » the arrival time and energy profile of each vehicle. At the vehicle level, a model predictive control strategy is adopted to ensure that vehicles pass through the intersection in a timely fashion. Our simulation study has shown that the proposed CIVIC-E 2 system can significantly improve intersection performance under various traffic conditions. Compared with conventional fixed-time and actuated signal control strategies, the proposed algorithm can reduce energy consumption and queue length by up to 31% and 95%, respectively.« less

Cooperative and Integrated Vehicle and Intersection Control for Energy Efficiency (CIVIC-E²)

DOE PAGES

Hou, Yunfei; Seliman, Salaheldeen M. S.; Wang, Enshu; ...

2018-02-15

Recent advances in connected vehicle technologies enable vehicles and signal controllers to cooperate and improve the traffic management at intersections. This paper explores the opportunity for cooperative and integrated vehicle and intersection control for energy efficiency (CIVIC-E 2) to contribute to a more sustainable transportation system. We propose a two-level approach that jointly optimizes the traffic signal timing and vehicles' approach speed, with the objective being to minimize total energy consumption for all vehicles passing through an isolated intersection. More specifically, at the intersection level, a dynamic programming algorithm is designed to find the optimal signal timing by explicitly consideringmore » the arrival time and energy profile of each vehicle. At the vehicle level, a model predictive control strategy is adopted to ensure that vehicles pass through the intersection in a timely fashion. Our simulation study has shown that the proposed CIVIC-E 2 system can significantly improve intersection performance under various traffic conditions. Compared with conventional fixed-time and actuated signal control strategies, the proposed algorithm can reduce energy consumption and queue length by up to 31% and 95%, respectively.« less

Apparatus and method for managing digital resources by passing digital resource tokens between queues

DOEpatents

Crawford, H.J.; Lindenstruth, V.

1999-06-29

A method of managing digital resources of a digital system includes the step of reserving token values for certain digital resources in the digital system. A selected token value in a free-buffer-queue is then matched to an incoming digital resource request. The selected token value is then moved to a valid-request-queue. The selected token is subsequently removed from the valid-request-queue to allow a digital agent in the digital system to process the incoming digital resource request associated with the selected token. Thereafter, the selected token is returned to the free-buffer-queue. 6 figs.

Apparatus and method for managing digital resources by passing digital resource tokens between queues

DOEpatents

Crawford, Henry J.; Lindenstruth, Volker

1999-01-01

A method of managing digital resources of a digital system includes the step of reserving token values for certain digital resources in the digital system. A selected token value in a free-buffer-queue is then matched to an incoming digital resource request. The selected token value is then moved to a valid-request-queue. The selected token is subsequently removed from the valid-request-queue to allow a digital agent in the digital system to process the incoming digital resource request associated with the selected token. Thereafter, the selected token is returned to the free-buffer-queue.

Usefulness of real-time three-dimensional ultrasonography in percutaneous nephrostomy: an animal study.

PubMed

Hongzhang, Hong; Xiaojuan, Qin; Shengwei, Zhang; Feixiang, Xiang; Yujie, Xu; Haibing, Xiao; Gallina, Kazobinka; Wen, Ju; Fuqing, Zeng; Xiaoping, Zhang; Mingyue, Ding; Huageng, Liang; Xuming, Zhang

2018-05-17

To evaluate the effect of real-time three-dimensional (3D) ultrasonography (US) in guiding percutaneous nephrostomy (PCN). A hydronephrosis model was devised in which the ureters of 16 beagles were obstructed. The beagles were divided equally into groups 1 and 2. In group 1, the PCN was performed using real-time 3D US guidance, while in group 2 the PCN was guided using two-dimensional (2D) US. Visualization of the needle tract, length of puncture time and number of puncture times were recorded for the two groups. In group 1, score for visualization of the needle tract, length of puncture time and number of puncture times were 3, 7.3 ± 3.1 s and one time, respectively. In group 2, the respective results were 1.4 ± 0.5, 21.4 ± 5.8 s and 2.1 ± 0.6 times. The visualization of needle tract in group 1 was superior to that in group 2, and length of puncture time and number of puncture times were both lower in group 1 than in group 2. Real-time 3D US-guided PCN is superior to 2D US-guided PCN in terms of visualization of needle tract and the targeted pelvicalyceal system, leading to quick puncture. Real-time 3D US-guided puncture of the kidney holds great promise for clinical implementation in PCN. © 2018 The Authors BJU International © 2018 BJU International Published by John Wiley & Sons Ltd.

Real Time Monitor of Grid job executions

NASA Astrophysics Data System (ADS)

Colling, D. J.; Martyniak, J.; McGough, A. S.; Křenek, A.; Sitera, J.; Mulač, M.; Dvořák, F.

2010-04-01

In this paper we describe the architecture and operation of the Real Time Monitor (RTM), developed by the Grid team in the HEP group at Imperial College London. This is arguably the most popular dissemination tool within the EGEE [1] Grid. Having been used, on many occasions including GridFest and LHC inauguration events held at CERN in October 2008. The RTM gathers information from EGEE sites hosting Logging and Bookkeeping (LB) services. Information is cached locally at a dedicated server at Imperial College London and made available for clients to use in near real time. The system consists of three main components: the RTM server, enquirer and an apache Web Server which is queried by clients. The RTM server queries the LB servers at fixed time intervals, collecting job related information and storing this in a local database. Job related data includes not only job state (i.e. Scheduled, Waiting, Running or Done) along with timing information but also other attributes such as Virtual Organization and Computing Element (CE) queue - if known. The job data stored in the RTM database is read by the enquirer every minute and converted to an XML format which is stored on a Web Server. This decouples the RTM server database from the client removing the bottleneck problem caused by many clients simultaneously accessing the database. This information can be visualized through either a 2D or 3D Java based client with live job data either being overlaid on to a 2 dimensional map of the world or rendered in 3 dimensions over a globe map using OpenGL.

Developing and pilot testing M-health care application for pregnant and toddlers based on user experience

NASA Astrophysics Data System (ADS)

Lestantri, I. D.; Putrima; Sabiq, A.; Suherlan, E.

2018-03-01

Indonesia is the country number 4 as the largest smartphone user. In addition to functioning as a social media, the use of smartphones for other purposes has begun to develop in order to facilitate the work. Similarly in the field of maternal and child health. Most of the public, pregnant mothers and checking the development of children under five, were conducted to the Public Health Center. As a service center, Public Health Center need to improve its services. Among other things, it needs to be supported with technology. The high number of queues, the length of queue time and the traffic jam, prompted the need for the development of health applications, based on mobile. The role of the user is crucial to the successful implementation of a technology. This study aims to measure whether the application of M-Health Care application, as a prototype of the application developed to meet the needs of users. M-Health Care Application was developed with a prototyping approach. While for the measurement of M-Health Care Application done by using approach of USE Questionnaire. From result of data processing got result, usability measurement value equal to 88,3%. This indicates the M-Health Care application prototype is considered satisfactory for the user.The results of this measurement can be used as a reference for the next M-Health Care application development model based on user experience.

Evaluation of roadway sites for queue management.

DOT National Transportation Integrated Search

1991-01-01

This study addresses the problem of queueing on highway facilities, wherein a large number of computerized methods for the analysis of different queueing situations are available. A three-tier classification system of the methodologies was used with ...

Throughput-optimal scheduling for broadcast channels

NASA Astrophysics Data System (ADS)

Eryilmaz, Atilla; Srikant, Rayadurgam; Perkins, James R.

2001-07-01

In this paper, we consider a degraded Gaussian broadcast channel, where the transmitter maintains separate queues for each receiver. We present throughput optimal policies that stabilize the queues without knowing the statistics of the arrival processes to these queues.

Nonfixed Retirement Age for University Professors: Modeling Its Effects on New Faculty Hires.

PubMed

Larson, Richard C; Diaz, Mauricio Gomez

2012-03-01

We model the set of tenure-track faculty members at a university as a queue, where "customers" in queue are faculty members in active careers. Arrivals to the queue are usually young, untenured assistant professors, and departures from the queue are primarily those who do not pass a promotion or tenure hurdle and those who retire. There are other less-often-used ways to enter and leave the queue. Our focus is on system effects of the elimination of mandatory retirement age. In particular, we are concerned with estimating the number of assistant professor slots that annually are no longer available because of the elimination of mandatory retirement. We start with steady-state assumptions that require use of Little's Law of Queueing, and we progress to a transient model using system dynamics. We apply these simple models using available data from our home university, the Massachusetts Institute of Technology.

Nonfixed Retirement Age for University Professors: Modeling Its Effects on New Faculty Hires

PubMed Central

Larson, Richard C.; Diaz, Mauricio Gomez

2013-01-01

We model the set of tenure-track faculty members at a university as a queue, where “customers” in queue are faculty members in active careers. Arrivals to the queue are usually young, untenured assistant professors, and departures from the queue are primarily those who do not pass a promotion or tenure hurdle and those who retire. There are other less-often-used ways to enter and leave the queue. Our focus is on system effects of the elimination of mandatory retirement age. In particular, we are concerned with estimating the number of assistant professor slots that annually are no longer available because of the elimination of mandatory retirement. We start with steady-state assumptions that require use of Little’s Law of Queueing, and we progress to a transient model using system dynamics. We apply these simple models using available data from our home university, the Massachusetts Institute of Technology. PMID:23936582

Monitoring Satellite Data Ingest and Processing for the Atmosphere Science Investigator-led Processing Systems (SIPS)

NASA Astrophysics Data System (ADS)

Witt, J.; Gumley, L.; Braun, J.; Dutcher, S.; Flynn, B.

2017-12-01

The Atmosphere SIPS (Science Investigator-led Processing Systems) team at the Space Science and Engineering Center (SSEC), which is funded through a NASA contract, creates Level 2 cloud and aerosol products from the VIIRS instrument aboard the S-NPP satellite. In order to monitor the ingest and processing of files, we have developed an extensive monitoring system to observe every step in the process. The status grid is used for real time monitoring, and shows the current state of the system, including what files we have and whether or not we are meeting our latency requirements. Our snapshot tool displays the state of the system in the past. It displays which files were available at a given hour and is used for historical and backtracking purposes. In addition to these grid like tools we have created histograms and other statistical graphs for tracking processing and ingest metrics, such as total processing time, job queue time, and latency statistics.

Communication library for run-time visualization of distributed, asynchronous data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rowlan, J.; Wightman, B.T.

1994-04-01

In this paper we present a method for collecting and visualizing data generated by a parallel computational simulation during run time. Data distributed across multiple processes is sent across parallel communication lines to a remote workstation, which sorts and queues the data for visualization. We have implemented our method in a set of tools called PORTAL (for Parallel aRchitecture data-TrAnsfer Library). The tools comprise generic routines for sending data from a parallel program (callable from either C or FORTRAN), a semi-parallel communication scheme currently built upon Unix Sockets, and a real-time connection to the scientific visualization program AVS. Our methodmore » is most valuable when used to examine large datasets that can be efficiently generated and do not need to be stored on disk. The PORTAL source libraries, detailed documentation, and a working example can be obtained by anonymous ftp from info.mcs.anl.gov from the file portal.tar.Z from the directory pub/portal.« less

41 CFR 102-74.485 - Is there any limitation on the length of time of a permit?

Code of Federal Regulations, 2010 CFR

2010-07-01

... on the length of time of a permit? 102-74.485 Section 102-74.485 Public Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL... limitation on the length of time of a permit? Yes, a permit may not be issued for a period of time in excess...

41 CFR 102-74.485 - Is there any limitation on the length of time of a permit?

Code of Federal Regulations, 2011 CFR

2011-01-01

... on the length of time of a permit? 102-74.485 Section 102-74.485 Public Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL... limitation on the length of time of a permit? Yes, a permit may not be issued for a period of time in excess...

Regenerative Simulation of Response Times in Networks of Queues.

DTIC Science & Technology

1979-11-01

i jobs at center 1. Nov consider the network of queues in Figure 2.2, formulated (Lewis and Shedler ( 1971 )) as a model of system overhead in...7.2 leading to point estimates and confidence intervals for the quantity r(f) are that the pairs of random variables {( V(fHk) : kall (9.2.3) are...189 Next we show that P’=P. Since P ’m"CIP for all i, we can use the Skorohod representation theorem (see Skorohod (1956) or Billingsley ( 1971 )) to

Markovian Queues with Arrival Dependence

DTIC Science & Technology

1976-03-01

adding together the three balance equations for P 2o’ ^21’ "^22 as ^°ll°ws ’ 1 20 2 21 <W P21= XP10 + *2P22 H- ( ^ l^ 2 )p22 = Xp11 "lP20 +UlP21 +V22...REPORT DOCUMENTATION PAGE READ INSTRUCTIONSBEFORE COMPLETING FORM 1 REPORT NUMBER 2 . GOVT ACCESSION NO. 3. RECIPIENT’S CATALOG NUMBER 4. TITLE (and...ADDITIONAL FACTS CONCERNING THE TRANSIENT DISTRIBUTION OF WAITING TIMES FOR ARRIVING CUSTOMERS 2 ? IV. THE TWO CHANNEL SERVER QUEUE WITH SINGLE

Channel Allocation in Wireless Integrated Services Networks for Low-Bit-Rate Applications.

DTIC Science & Technology

1998-06-01

server remains idle until the beginning of the next slot, even if cells arrive in the meanwhile.7 The server is assumed to be non - preemptive , i.e., it...If the ToE of the cell is smaller than 1/C^(the service time): i) Discard the cell. 2. Sort the remaining cells in the queue in a non -decreasing...126 Next, the cell-loss-probability ratios (CLPR) of non -empty sources (i.e., having at least one cell in the queue ) defined as ratios between the

DSN command system Mark III-78. [data processing

NASA Technical Reports Server (NTRS)

Stinnett, W. G.

1978-01-01

The Deep Space Network command Mark III-78 data processing system includes a capability for a store-and-forward handling method. The functions of (1) storing the command files at a Deep Space station; (2) attaching the files to a queue; and (3) radiating the commands to the spacecraft are straightforward. However, the total data processing capability is a result of assuming worst case, failure-recovery, or nonnominal operating conditions. Optional data processing functions include: file erase, clearing the queue, suspend radiation, command abort, resume command radiation, and close window time override.

NQS - NETWORK QUEUING SYSTEM, VERSION 2.0 (UNIX VERSION)

NASA Technical Reports Server (NTRS)

Walter, H.

1994-01-01

The Network Queuing System, NQS, is a versatile batch and device queuing facility for a single Unix computer or a group of networked computers. With the Unix operating system as a common interface, the user can invoke the NQS collection of user-space programs to move batch and device jobs freely around the different computer hardware tied into the network. NQS provides facilities for remote queuing, request routing, remote status, queue status controls, batch request resource quota limits, and remote output return. This program was developed as part of an effort aimed at tying together diverse UNIX based machines into NASA's Numerical Aerodynamic Simulator Processing System Network. This revision of NQS allows for creating, deleting, adding and setting of complexes that aid in limiting the number of requests to be handled at one time. It also has improved device-oriented queues along with some revision of the displays. NQS was designed to meet the following goals: 1) Provide for the full support of both batch and device requests. 2) Support all of the resource quotas enforceable by the underlying UNIX kernel implementation that are relevant to any particular batch request and its corresponding batch queue. 3) Support remote queuing and routing of batch and device requests throughout the NQS network. 4) Support queue access restrictions through user and group access lists for all queues. 5) Enable networked output return of both output and error files to possibly remote machines. 6) Allow mapping of accounts across machine boundaries. 7) Provide friendly configuration and modification mechanisms for each installation. 8) Support status operations across the network, without requiring a user to log in on remote target machines. 9) Provide for file staging or copying of files for movement to the actual execution machine. To support batch and device requests, NQS v.2 implements three queue types--batch, device and pipe. Batch queues hold and prioritize batch requests; device queues hold and prioritize device requests; pipe queues transport both batch and device requests to other batch, device, or pipe queues at local or remote machines. Unique to batch queues are resource quota limits that restrict the amounts of different resources that a batch request can consume during execution. Unique to each device queue is a set of one or more devices, such as a line printer, to which requests can be sent for execution. Pipe queues have associated destinations to which they route and deliver requests. If the proper destination machine is down or unreachable, pipe queues are able to requeue the request and deliver it later when the destination is available. All NQS network conversations are performed using the Berkeley socket mechanism as ported into the respective vendor kernels. NQS is written in C language. The generic UNIX version (ARC-13179) has been successfully implemented on a variety of UNIX platforms, including Sun3 and Sun4 series computers, SGI IRIS computers running IRIX 3.3, DEC computers running ULTRIX 4.1, AMDAHL computers running UTS 1.3 and 2.1, platforms running BSD 4.3 UNIX. The IBM RS/6000 AIX version (COS-10042) is a vendor port. NQS 2.0 will also communicate with the Cray Research, Inc. and Convex, Inc. versions of NQS. The standard distribution medium for either machine version of NQS 2.0 is a 60Mb, QIC-24, .25 inch streaming magnetic tape cartridge in UNIX tar format. Upon request the generic UNIX version (ARC-13179) can be provided in UNIX tar format on alternate media. Please contact COSMIC to discuss the availability and cost of media to meet your specific needs. An electronic copy of the NQS 2.0 documentation is included on the program media. NQS 2.0 was released in 1991. The IBM RS/6000 port of NQS was developed in 1992. IRIX is a trademark of Silicon Graphics Inc. IRIS is a registered trademark of Silicon Graphics Inc. UNIX is a registered trademark of UNIX System Laboratories Inc. Sun3 and Sun4 are trademarks of Sun Microsystems Inc. DEC and ULTRIX are trademarks of Digital Equipment Corporation.

Computing moving and intermittent queue propagation in highway work zones.

DOT National Transportation Integrated Search

2012-07-01

Drivers may experience intermittent congestion and moving queue conditions in work zones due to several reasons such as presence of lane closure, roadway geometric changes, higher demand, lower speed, and reduced capacity. The congestion and queue ha...

Just-in-time connectivity for large spiking networks.

PubMed

Lytton, William W; Omurtag, Ahmet; Neymotin, Samuel A; Hines, Michael L

2008-11-01

The scale of large neuronal network simulations is memory limited due to the need to store connectivity information: connectivity storage grows as the square of neuron number up to anatomically relevant limits. Using the NEURON simulator as a discrete-event simulator (no integration), we explored the consequences of avoiding the space costs of connectivity through regenerating connectivity parameters when needed: just in time after a presynaptic cell fires. We explored various strategies for automated generation of one or more of the basic static connectivity parameters: delays, postsynaptic cell identities, and weights, as well as run-time connectivity state: the event queue. Comparison of the JitCon implementation to NEURON's standard NetCon connectivity method showed substantial space savings, with associated run-time penalty. Although JitCon saved space by eliminating connectivity parameters, larger simulations were still memory limited due to growth of the synaptic event queue. We therefore designed a JitEvent algorithm that added items to the queue only when required: instead of alerting multiple postsynaptic cells, a spiking presynaptic cell posted a callback event at the shortest synaptic delay time. At the time of the callback, this same presynaptic cell directly notified the first postsynaptic cell and generated another self-callback for the next delay time. The JitEvent implementation yielded substantial additional time and space savings. We conclude that just-in-time strategies are necessary for very large network simulations but that a variety of alternative strategies should be considered whose optimality will depend on the characteristics of the simulation to be run.

Just in time connectivity for large spiking networks

PubMed Central

Lytton, William W.; Omurtag, Ahmet; Neymotin, Samuel A; Hines, Michael L

2008-01-01

The scale of large neuronal network simulations is memory-limited due to the need to store connectivity information: connectivity storage grows as the square of neuron number up to anatomically-relevant limits. Using the NEURON simulator as a discrete-event simulator (no integration), we explored the consequences of avoiding the space costs of connectivity through regenerating connectivity parameters when needed – just-in-time after a presynaptic cell fires. We explored various strategies for automated generation of one or more of the basic static connectivity parameters: delays, postsynaptic cell identities and weights, as well as run-time connectivity state: the event queue. Comparison of the JitCon implementation to NEURON’s standard NetCon connectivity method showed substantial space savings, with associated run-time penalty. Although JitCon saved space by eliminating connectivity parameters, larger simulations were still memory-limited due to growth of the synaptic event queue. We therefore designed a JitEvent algorithm that only added items to the queue when required: instead of alerting multiple postsynaptic cells, a spiking presynaptic cell posted a callback event at the shortest synaptic delay time. At the time of the callback, this same presynaptic cell directly notified the first postsynaptic cell and generated another self-callback for the next delay time. The JitEvent implementation yielded substantial additional time and space savings. We conclude that just-in-time strategies are necessary for very large network simulations but that a variety of alternative strategies should be considered whose optimality will depend on the characteristics of the simulation to be run. PMID:18533821

Five easy equations for patient flow through an emergency department.

PubMed

Madsen, Thomas Lill; Kofoed-Enevoldsen, Allan

2011-10-01

Queue models are effective tools for framing management decisions and Danish hospitals could benefit from awareness of such models. Currently, as emergency departments (ED) are under reorganization, we deem it timely to empirically investigate the applicability of the standard "M/M/1" queue model in order to document its relevance. We compared actual versus theoretical distributions of hourly patient flow from 27,000 patient cases seen at Frederiksberg Hospital's ED. Formulating equations for arrivals and capacity, we wrote and tested a five equation simulation model. The Poisson distribution fitted arrivals with an hour-of-the-day specific parameter. Treatment times exceeding 15 minutes were well-described by an exponential distribution. The ED can be modelled as a black box with an hourly capacity that can be estimated either as admissions per hour when the ED operates full hilt Poisson distribution or from the linear dependency of waiting times on queue number. The results show that our ED capacity is surprisingly constant despite variations in staffing. These findings led to the formulation of a model giving a compact framework for assessing the behaviour of the ED under different assumptions about opening hours, capacity and workload. The M/M/1 almost perfectly fits our. Thus modeling and simulations have contributed to the management process. not relevant. not relevant.

Initial Data Analysis Results for ATD-2 ISAS HITL Simulation

NASA Technical Reports Server (NTRS)

Lee, Hanbong

2017-01-01

To evaluate the operational procedures and information requirements for the core functional capabilities of the ATD-2 project, such as tactical surface metering tool, APREQ-CFR procedure, and data element exchanges between ramp and tower, human-in-the-loop (HITL) simulations were performed in March, 2017. This presentation shows the initial data analysis results from the HITL simulations. With respect to the different runway configurations and metering values in tactical surface scheduler, various airport performance metrics were analyzed and compared. These metrics include gate holding time, taxi-out in time, runway throughput, queue size and wait time in queue, and TMI flight compliance. In addition to the metering value, other factors affecting the airport performance in the HITL simulation, including run duration, runway changes, and TMI constraints, are also discussed.

Efficient partitioning and assignment on programs for multiprocessor execution

NASA Technical Reports Server (NTRS)

Standley, Hilda M.

1993-01-01

The general problem studied is that of segmenting or partitioning programs for distribution across a multiprocessor system. Efficient partitioning and the assignment of program elements are of great importance since the time consumed in this overhead activity may easily dominate the computation, effectively eliminating any gains made by the use of the parallelism. In this study, the partitioning of sequentially structured programs (written in FORTRAN) is evaluated. Heuristics, developed for similar applications are examined. Finally, a model for queueing networks with finite queues is developed which may be used to analyze multiprocessor system architectures with a shared memory approach to the problem of partitioning. The properties of sequentially written programs form obstacles to large scale (at the procedure or subroutine level) parallelization. Data dependencies of even the minutest nature, reflecting the sequential development of the program, severely limit parallelism. The design of heuristic algorithms is tied to the experience gained in the parallel splitting. Parallelism obtained through the physical separation of data has seen some success, especially at the data element level. Data parallelism on a grander scale requires models that accurately reflect the effects of blocking caused by finite queues. A model for the approximation of the performance of finite queueing networks is developed. This model makes use of the decomposition approach combined with the efficiency of product form solutions.

B-1B Avionics/Automatic Test Equipment: Maintenance Queueing Analysis.

DTIC Science & Technology

1983-12-01

analysis (which is logistics terminology for an avionics/ATE queueing analysis). To allow each vendor the opportunity to perform such an analysis...for system performance measures may be found for the queueing system in Figure 7. This is due to the preemptive blocking caused by ATE failures. The...D-R14l1i75 B-iB AVIONICS/AUTOMPTIC TEST EQUIPMENT: MRINTENRNCE 1/2 QUEUEING RNRLYSIS(U) RIP FORCE INST OF TECH HRIGHT-PRTTERSON RFB OH SCHOOL OF

LiveWire interactive boundary extraction algorithm based on Haar wavelet transform and control point set direction search

NASA Astrophysics Data System (ADS)

Cheng, Jun; Zhang, Jun; Tian, Jinwen

2015-12-01

Based on deep analysis of the LiveWire interactive boundary extraction algorithm, a new algorithm focusing on improving the speed of LiveWire algorithm is proposed in this paper. Firstly, the Haar wavelet transform is carried on the input image, and the boundary is extracted on the low resolution image obtained by the wavelet transform of the input image. Secondly, calculating LiveWire shortest path is based on the control point set direction search by utilizing the spatial relationship between the two control points users provide in real time. Thirdly, the search order of the adjacent points of the starting node is set in advance. An ordinary queue instead of a priority queue is taken as the storage pool of the points when optimizing their shortest path value, thus reducing the complexity of the algorithm from O[n2] to O[n]. Finally, A region iterative backward projection method based on neighborhood pixel polling has been used to convert dual-pixel boundary of the reconstructed image to single-pixel boundary after Haar wavelet inverse transform. The algorithm proposed in this paper combines the advantage of the Haar wavelet transform and the advantage of the optimal path searching method based on control point set direction search. The former has fast speed of image decomposition and reconstruction and is more consistent with the texture features of the image and the latter can reduce the time complexity of the original algorithm. So that the algorithm can improve the speed in interactive boundary extraction as well as reflect the boundary information of the image more comprehensively. All methods mentioned above have a big role in improving the execution efficiency and the robustness of the algorithm.

Request queues for interactive clients in a shared file system of a parallel computing system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bent, John M.; Faibish, Sorin

Interactive requests are processed from users of log-in nodes. A metadata server node is provided for use in a file system shared by one or more interactive nodes and one or more batch nodes. The interactive nodes comprise interactive clients to execute interactive tasks and the batch nodes execute batch jobs for one or more batch clients. The metadata server node comprises a virtual machine monitor; an interactive client proxy to store metadata requests from the interactive clients in an interactive client queue; a batch client proxy to store metadata requests from the batch clients in a batch client queue;more » and a metadata server to store the metadata requests from the interactive client queue and the batch client queue in a metadata queue based on an allocation of resources by the virtual machine monitor. The metadata requests can be prioritized, for example, based on one or more of a predefined policy and predefined rules.« less

Developing a programme of patient 'streaming' in an emergency department.

PubMed

Smith, Bryan; Burscough, Sheila

2015-05-01

Orthopaedic and musculoskeletal injuries are commonly identified in the emergency department (ED). Whilst much orthopaedic trauma literature focuses on fractures of the proximal femur, raising key issues such as length of stay and timely discharge, the start of the patients' journey is just as important in ensuring an appropriate assessment and a smooth transition through each stage of care. In the UK targets have been set for proximal hip fractured patients to attend theatre within 48 hours of admission, if fit. Appraising such patients expediently on initial point of contact in the ED has demonstrated that a number of factors can impinge and delay the patients' progress. This said a large number of other orthopaedic and musculoskeletal self presenting patients rely on the same appropriate transition to suitable medical assistance. The emergency department triage system has been used in the UK in its latest format since 2001, yet elderly patients with painful Colles fractures find they wait for specialist attention in a linear queue, possibly over extended lengths of time. This short paper explores how 'streaming' patients in one local ED has improved waiting/treatment times, and identified the fact that in some months (December 2012), 1 in 3 attendees present with a musculoskeletal problem. Using audit data collected over the last four years the benefits of 'streaming' patients is evident. Copyright © 2014 Elsevier Ltd. All rights reserved.

Queues and Reference Service: Some Implications for Staffing

ERIC Educational Resources Information Center

Regazzi, John J.; Hersberger, Rodney M.

1978-01-01

This study at an academic library used a simulation technique (1) to analyze the extent to which queues develop at a reference desk during peak periods, (2) to propose alternative staffing models to reduce queues, and (3) to examine the cost effectiveness of the alternatives. (Author/JAB)

xLuna - D emonstrator on ESA Mars Rover

NASA Astrophysics Data System (ADS)

Braga, P.; Henriques, L.; Carvalho, B.; Chevalley, P.; Zulianello, M.

2008-08-01

There is a significant gap between the services offered by existing space qualified Real-Time Operating Systems (RTOS) and those required by the most demanding future space applications. New requirements for autonomy, terrain mapping and navigation, Simultaneous Location and Mapping (SLAM), improvement of the throughput of science tasks, all demand high level services such as file systems or POSIX compliant interfaces. xLuna is an operating system that aims fulfilling these new requirements. Besides providing the typical services that of an RTOS (tasks and interrupts management, timers, message queues, etc), it also includes most of the features available in modern general-purpose operating systems, such as Linux. This paper describes a case study that proposes to demonstrate the usage of xLuna on board a rover currently in use for the development of algorithms in preparation of a mission to Mars.

A novel approach to optimize workflow in grid-based teleradiology applications.

PubMed

Yılmaz, Ayhan Ozan; Baykal, Nazife

2016-01-01

This study proposes an infrastructure with a reporting workflow optimization algorithm (RWOA) in order to interconnect facilities, reporting units and radiologists on a single access interface, to increase the efficiency of the reporting process by decreasing the medical report turnaround time and to increase the quality of medical reports by determining the optimum match between the inspection and radiologist in terms of subspecialty, workload and response time. Workflow centric network architecture with an enhanced caching, querying and retrieving mechanism is implemented by seamlessly integrating Grid Agent and Grid Manager to conventional digital radiology systems. The inspection and radiologist attributes are modelled using a hierarchical ontology structure. Attribute preferences rated by radiologists and technical experts are formed into reciprocal matrixes and weights for entities are calculated utilizing Analytic Hierarchy Process (AHP). The assignment alternatives are processed by relation-based semantic matching (RBSM) and Integer Linear Programming (ILP). The results are evaluated based on both real case applications and simulated process data in terms of subspecialty, response time and workload success rates. Results obtained using simulated data are compared with the outcomes obtained by applying Round Robin, Shortest Queue and Random distribution policies. The proposed algorithm is also applied to a real case teleradiology application process data where medical reporting workflow was performed based on manual assignments by the chief radiologist for 6225 inspections. RBSM gives the highest subspecialty success rate and integrating ILP with RBSM ratings as RWOA provides a better response time and workload distribution success rate. RWOA based image delivery also prevents bandwidth, storage or hardware related stuck and latencies. When compared with a real case teleradiology application where inspection assignments were performed manually, the proposed solution was found to increase the experience success rate by 13.25%, workload success rate by 63.76% and response time success rate by 120%. The total response time in the real case application data was improved by 22.39%. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

41 CFR 105-60.402-2 - Response to initial requests.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Management Regulations System (Continued) GENERAL SERVICES ADMINISTRATION Regional Offices-General Services... denial. (e) GSA may, at its discretion, establish three processing queues based on whether any requests... each queue, responses will be prepared on a “first in, first out” basis. One queue will be made up of...

ON CONTINUOUS-REVIEW (S-1,S) INVENTORY POLICIES WITH STATE-DEPENDENT LEADTIMES,

DTIC Science & Technology

INVENTORY CONTROL, *REPLACEMENT THEORY), MATHEMATICAL MODELS, LEAD TIME , MANAGEMENT ENGINEERING, DISTRIBUTION FUNCTIONS, PROBABILITY, QUEUEING THEORY, COSTS, OPTIMIZATION, STATISTICAL PROCESSES, DIFFERENCE EQUATIONS

Surface recombination velocity imaging of wet-cleaned silicon wafers using quantitative heterodyne lock-in carrierography

NASA Astrophysics Data System (ADS)

Sun, Qiming; Melnikov, Alexander; Mandelis, Andreas; Pagliaro, Robert H.

2018-01-01

InGaAs-camera based heterodyne lock-in carrierography (HeLIC) is developed for surface recombination velocity (SRV) imaging characterization of bare (oxide-free) hydrogen passivated Si wafer surfaces. Samples prepared using four different hydrofluoric special-solution etching conditions were tested, and a quantitative assessment of their surface quality vs. queue-time after the hydrogen passivation process was made. The data acquisition time for an SRV image was about 3 min. A "round-trip" frequency-scan mode was introduced to minimize the effects of signal transients on data self-consistency. Simultaneous best fitting of HeLIC amplitude-frequency dependencies at various queue-times was used to guarantee the reliability of resolving surface and bulk carrier recombination/transport properties. The dynamic range of the measured SRV values was established from 0.1 to 100 m/s.

Anomalous Growth of Aging Populations

NASA Astrophysics Data System (ADS)

Grebenkov, Denis S.

2016-04-01

We consider a discrete-time population dynamics with age-dependent structure. At every time step, one of the alive individuals from the population is chosen randomly and removed with probability q_k depending on its age, whereas a new individual of age 1 is born with probability r. The model can also describe a single queue in which the service order is random while the service efficiency depends on a customer's "age" in the queue. We propose a mean field approximation to investigate the long-time asymptotic behavior of the mean population size. The age dependence is shown to lead to anomalous power-law growth of the population at the critical regime. The scaling exponent is determined by the asymptotic behavior of the probabilities q_k at large k. The mean field approximation is validated by Monte Carlo simulations.

Efficient priority queueing routing strategy on networks of mobile agents

NASA Astrophysics Data System (ADS)

Wu, Gan-Hua; Yang, Hui-Jie; Pan, Jia-Hui

2018-03-01

As a consequence of their practical implications for communications networks, traffic dynamics on complex networks have recently captivated researchers. Previous routing strategies for improving transport efficiency have paid little attention to the orders in which the packets should be forwarded, just simply used first-in-first-out queue discipline. Here, we apply a priority queuing discipline and propose a shortest-distance-first routing strategy on networks of mobile agents. Numerical experiments reveal that the proposed scheme remarkably improves both the network throughput and the packet arrival rate and reduces both the average traveling time and the rate of waiting time to traveling time. Moreover, we find that the network capacity increases with an increase in both the communication radius and the number of agents. Our work may be helpful for the design of routing strategies on networks of mobile agents.

Gender and socioeconomic status as determinants of waiting time for inpatient surgery in a system with implicit queue management.

PubMed

Arnesen, Kjell E; Erikssen, Jan; Stavem, Knut

2002-12-01

In a system with implicit queue management, to examine gender and socioeconomic status as determinants of waiting time for inpatient surgery, after adjusting for other potential predictors. A cohort of 452 subjects was examined in outpatient clinics of a general hospital and referred to inpatient surgery. They were followed until scheduled hospital admission (n=396) or until the requested procedure no longer was relevant (n=56). We compared waiting time between groups from referral date until hospital admission, using Kaplan-Meier estimates of waiting times and log rank test. A Cox proportional hazards model was used for assessing the risk ratio (RR) of hospital admission for scheduled surgery. Gender and socioeconomic status could not explain variations in waiting time. However, patients with suspected/verified neoplastic disease or a risk of serious deterioration without treatment had markedly shorter waiting times than the reference groups, with adjusted RR (95% confidence intervals (95%CI)) of time to receiving in-patient surgery of 2.3 (1.7-3.0) and 2.0 (1.3-3.0), respectively. Being on sick leave was associated with shorter waiting time, adjusted RR of 1.7 (1.2-2.5). Referrals from within the hospital or other hospitals had also shorter waiting times than referrals from primary health care physicians, adjusted RR=1.4 (1.1-1.8). There was no evidence of bias against women or people in lower socioeconomic classes in this implicit queue management system. However, patients' access to inpatient surgery was associated with malignancy, prognosis, sick leave status, physician experience, referral pattern and the major diagnosis category.

Using multi-class queuing network to solve performance models of e-business sites.

PubMed

Zheng, Xiao-ying; Chen, De-ren

2004-01-01

Due to e-business's variety of customers with different navigational patterns and demands, multi-class queuing network is a natural performance model for it. The open multi-class queuing network(QN) models are based on the assumption that no service center is saturated as a result of the combined loads of all the classes. Several formulas are used to calculate performance measures, including throughput, residence time, queue length, response time and the average number of requests. The solution technique of closed multi-class QN models is an approximate mean value analysis algorithm (MVA) based on three key equations, because the exact algorithm needs huge time and space requirement. As mixed multi-class QN models, include some open and some closed classes, the open classes should be eliminated to create a closed multi-class QN so that the closed model algorithm can be applied. Some corresponding examples are given to show how to apply the algorithms mentioned in this article. These examples indicate that multi-class QN is a reasonably accurate model of e-business and can be solved efficiently.

Independent Engineering Assessment of the Army’s Transportation Plan for BRAC Recommendation #133 Project Fort Belvoir - Mark Center, Virginia

DTIC Science & Technology

2011-11-30

does not display a currently valid OMB control number. 1. REPORT DATE 30 NOV 2011 2. REPORT TYPE 3. DATES COVERED 00-00-2011 to 00-00-2011 4...Appropriate site variables (for purposes of accurate modeling); • Potential queues caused by the access control facility to the south parking...to LoS D LoS Control Delay/Vehicle (sec) Qualitative Description A ≤10 Good progression, few stops, and short cycle lengths B >10 - 20 Good

Single stage queueing/manufacturing system model that involves emission variable

NASA Astrophysics Data System (ADS)

Murdapa, P. S.; Pujawan, I. N.; Karningsih, P. D.; Nasution, A. H.

2018-04-01

Queueing is commonly occured at every industry. The basic model of queueing theory gives a foundation for modeling a manufacturing system. Nowadays, carbon emission is an important and inevitable issue due to its huge impact to our environment. However, existing model of queuing applied for analysis of single stage manufacturing system has not taken Carbon emissions into consideration. If it is applied to manufacturing context, it may lead to improper decisisions. By taking into account of emission variables into queuing models, not only the model become more comprehensive but also it creates awareness on the issue to many parties that involves in the system. This paper discusses the single stage M/M/1 queueing model that involves emission variable. Hopefully it could be a starting point for the next more complex models. It has a main objective for determining how carbon emissions could fit into the basic queueing theory. It turned out that the involvement of emission variables into the model has modified the traditional model of a single stage queue to a calculation model of production lot quantity allowed per period.

Store operation with conditional push of a tag value to a queue

DOEpatents

Heidelberger, Philip; Steinmacher-Burow, Burkhard

2015-07-28

According to one embodiment, a method for a store operation with a conditional push of a tag value to a queue is provided. The method includes configuring a queue that is accessible by an application, setting a value at an address in a memory device including a memory and a controller, receiving a request for an operation using the value at the address and performing the operation. The method also includes the controller writing a result of the operation to the address, thus changing the value at the address, the controller determining if the result of the operation meets a condition and the controller pushing a tag value to the queue based on the condition being met, where the tag value in the queue indicates to the application that the condition is met.

LWAs computational platform for e-consultation using mobile devices: cases from developing nations.

PubMed

Olajubu, Emmanuel Ajayi; Odukoya, Oluwatoyin Helen; Akinboro, Solomon Adegbenro

2014-01-01

Mobile devices have been impacting on human standard of living by providing timely and accurate information anywhere and anytime through wireless media in developing nations. Shortage of experts in medical fields is very obvious throughout the whole world but more pronounced in developing nations. Thus, this study proposes a telemedicine platform for the vulnerable areas of developing nations. The vulnerable area are the interior with little or no medical facilities, hence the dwellers are very susceptible to sicknesses and diseases. The framework uses mobile devices that can run LightWeight Agents (LWAs) to send consultation requests to a remote medical expert in urban city from the vulnerable interiors. The feedback is conveyed to the requester through the same medium. The system architecture which contained AgenRoller, LWAs, The front-end (mobile devices) and back-end (the medical server) is presented. The algorithm for the software component of the architecture (AgenRoller) is also presented. The system is modeled as M/M/1/c queuing system, and simulated using Simevents from MATLAB Simulink environment. The simulation result presented show the average queue length, the number of entities in the queue and the number of entities departure from the system. These together present the rate of information processing in the system. A full scale development of this system with proper implementation will help extend the few medical facilities available in the urban cities in developing nations to the interiors thereby reducing the number of casualties in the vulnerable areas of the developing world especially in Sub Saharan Africa.

Clinic flow for STI, HIV, and TB patients in an urban infectious disease clinic offering point-of-care testing services in Durban, South Africa.

PubMed

Stime, Katrina J; Garrett, Nigel; Sookrajh, Yukteshwar; Dorward, Jienchi; Dlamini, Ntuthu; Olowolagba, Ayo; Sharma, Monisha; Barnabas, Ruanne V; Drain, Paul K

2018-05-11

Many clinics in Southern Africa have long waiting times. The implementation of point-of-care (POC) tests to accelerate diagnosis and improve clinical management in resource-limited settings may improve or worsen clinic flow and waiting times. The objective of this study was to describe clinic flow with special emphasis on the impact of POC testing at a large urban public healthcare clinic in Durban, South Africa. We used time and motion methods to directly observe patients and practitioners. We created patient flow maps and recorded individual patient waiting and consultation times for patients seeking STI, TB, or HIV care. We conducted semi-structured interviews with 20 clinic staff to ascertain staff opinions on clinic flow and POC test implementation. Among 121 observed patients, the total number of queues ranged from 4 to 7 and total visit times ranged from 0:14 (hours:minutes) to 7:38. Patients waited a mean of 2:05 for standard-of-care STI management, and approximately 4:56 for STI POC diagnostic testing. Stable HIV patients who collected antiretroviral therapy refills waited a mean of 2:42 in the standard queue and 2:26 in the fast-track queue. A rapid TB test on a small sample of patients with the Xpert MTB/RIF assay and treatment initiation took a mean of 6:56, and 40% of patients presenting with TB-related symptoms were asked to return for an additional clinic visit to obtain test results. For all groups, the mean clinical assessment time with a nurse or physician was 7 to 9 min, which accounted for 2 to 6% of total visit time. Staff identified poor clinic flow and personnel shortages as areas of concern that may pose challenges to expanding POC tests in the current clinic environment. This busy urban clinic had multiple patient queues, long clinical visits, and short clinical encounters. Although POC testing ensured patients received a diagnosis sooner, it more than doubled the time STI patients spent at the clinic and did not result in same-day diagnosis for all patients screened for TB. Further research on implementing POC testing efficiently into care pathways is required to make these promising assays a success.

CrocoBLAST: Running BLAST efficiently in the age of next-generation sequencing.

PubMed

Tristão Ramos, Ravi José; de Azevedo Martins, Allan Cézar; da Silva Delgado, Gabrielle; Ionescu, Crina-Maria; Ürményi, Turán Peter; Silva, Rosane; Koca, Jaroslav

2017-11-15

CrocoBLAST is a tool for dramatically speeding up BLAST+ execution on any computer. Alignments that would take days or weeks with NCBI BLAST+ can be run overnight with CrocoBLAST. Additionally, CrocoBLAST provides features critical for NGS data analysis, including: results identical to those of BLAST+; compatibility with any BLAST+ version; real-time information regarding calculation progress and remaining run time; access to partial alignment results; queueing, pausing, and resuming BLAST+ calculations without information loss. CrocoBLAST is freely available online, with ample documentation (webchem.ncbr.muni.cz/Platform/App/CrocoBLAST). No installation or user registration is required. CrocoBLAST is implemented in C, while the graphical user interface is implemented in Java. CrocoBLAST is supported under Linux and Windows, and can be run under Mac OS X in a Linux virtual machine. jkoca@ceitec.cz. Supplementary data are available at Bioinformatics online. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

State dependent arrival in bulk retrial queueing system with immediate Bernoulli feedback, multiple vacations and threshold

NASA Astrophysics Data System (ADS)

Niranjan, S. P.; Chandrasekaran, V. M.; Indhira, K.

2017-11-01

The objective of this paper is to analyse state dependent arrival in bulk retrial queueing system with immediate Bernoulli feedback, multiple vacations, threshold and constant retrial policy. Primary customers are arriving into the system in bulk with different arrival rates λ a and λ b . If arriving customers find the server is busy then the entire batch will join to orbit. Customer from orbit request service one by one with constant retrial rate γ. On the other hand if an arrival of customers finds the server is idle then customers will be served in batches according to general bulk service rule. After service completion, customers may request service again with probability δ as feedback or leave from the system with probability 1 - δ. In the service completion epoch, if the orbit size is zero then the server leaves for multiple vacations. The server continues the vacation until the orbit size reaches the value ‘N’ (N > b). At the vacation completion, if the orbit size is ‘N’ then the server becomes ready to provide service for customers from the main pool or from the orbit. For the designed queueing model, probability generating function of the queue size at an arbitrary time will be obtained by using supplementary variable technique. Various performance measures will be derived with suitable numerical illustrations.

Extending body space in immersive virtual reality: a very long arm illusion.

PubMed

Kilteni, Konstantina; Normand, Jean-Marie; Sanchez-Vives, Maria V; Slater, Mel

2012-01-01

Recent studies have shown that a fake body part can be incorporated into human body representation through synchronous multisensory stimulation on the fake and corresponding real body part - the most famous example being the Rubber Hand Illusion. However, the extent to which gross asymmetries in the fake body can be assimilated remains unknown. Participants experienced, through a head-tracked stereo head-mounted display a virtual body coincident with their real body. There were 5 conditions in a between-groups experiment, with 10 participants per condition. In all conditions there was visuo-motor congruence between the real and virtual dominant arm. In an Incongruent condition (I), where the virtual arm length was equal to the real length, there was visuo-tactile incongruence. In four Congruent conditions there was visuo-tactile congruence, but the virtual arm lengths were either equal to (C1), double (C2), triple (C3) or quadruple (C4) the real ones. Questionnaire scores and defensive withdrawal movements in response to a threat showed that the overall level of ownership was high in both C1 and I, and there was no significant difference between these conditions. Additionally, participants experienced ownership over the virtual arm up to three times the length of the real one, and less strongly at four times the length. The illusion did decline, however, with the length of the virtual arm. In the C2-C4 conditions although a measure of proprioceptive drift positively correlated with virtual arm length, there was no correlation between the drift and ownership of the virtual arm, suggesting different underlying mechanisms between ownership and drift. Overall, these findings extend and enrich previous results that multisensory and sensorimotor information can reconstruct our perception of the body shape, size and symmetry even when this is not consistent with normal body proportions.

Extending Body Space in Immersive Virtual Reality: A Very Long Arm Illusion

PubMed Central

Kilteni, Konstantina; Normand, Jean-Marie; Sanchez-Vives, Maria V.; Slater, Mel

2012-01-01

Recent studies have shown that a fake body part can be incorporated into human body representation through synchronous multisensory stimulation on the fake and corresponding real body part – the most famous example being the Rubber Hand Illusion. However, the extent to which gross asymmetries in the fake body can be assimilated remains unknown. Participants experienced, through a head-tracked stereo head-mounted display a virtual body coincident with their real body. There were 5 conditions in a between-groups experiment, with 10 participants per condition. In all conditions there was visuo-motor congruence between the real and virtual dominant arm. In an Incongruent condition (I), where the virtual arm length was equal to the real length, there was visuo-tactile incongruence. In four Congruent conditions there was visuo-tactile congruence, but the virtual arm lengths were either equal to (C1), double (C2), triple (C3) or quadruple (C4) the real ones. Questionnaire scores and defensive withdrawal movements in response to a threat showed that the overall level of ownership was high in both C1 and I, and there was no significant difference between these conditions. Additionally, participants experienced ownership over the virtual arm up to three times the length of the real one, and less strongly at four times the length. The illusion did decline, however, with the length of the virtual arm. In the C2–C4 conditions although a measure of proprioceptive drift positively correlated with virtual arm length, there was no correlation between the drift and ownership of the virtual arm, suggesting different underlying mechanisms between ownership and drift. Overall, these findings extend and enrich previous results that multisensory and sensorimotor information can reconstruct our perception of the body shape, size and symmetry even when this is not consistent with normal body proportions. PMID:22829891

Improved dual-loop detection system for collecting real-time truck data

DOT National Transportation Integrated Search

2005-02-01

The WSDOTs dual-loop detectors capability of measuring vehicle lengths makes the dual-loop detection system a potential real-time truck data source for freight movement study. However, a previous study found the WSDOT dual-loop detection system...

Jobs masonry in LHCb with elastic Grid Jobs

NASA Astrophysics Data System (ADS)

Stagni, F.; Charpentier, Ph

2015-12-01

In any distributed computing infrastructure, a job is normally forbidden to run for an indefinite amount of time. This limitation is implemented using different technologies, the most common one being the CPU time limit implemented by batch queues. It is therefore important to have a good estimate of how much CPU work a job will require: otherwise, it might be killed by the batch system, or by whatever system is controlling the jobs’ execution. In many modern interwares, the jobs are actually executed by pilot jobs, that can use the whole available time in running multiple consecutive jobs. If at some point the available time in a pilot is too short for the execution of any job, it should be released, while it could have been used efficiently by a shorter job. Within LHCbDIRAC, the LHCb extension of the DIRAC interware, we developed a simple way to fully exploit computing capabilities available to a pilot, even for resources with limited time capabilities, by adding elasticity to production MonteCarlo (MC) simulation jobs. With our approach, independently of the time available, LHCbDIRAC will always have the possibility to execute a MC job, whose length will be adapted to the available amount of time: therefore the same job, running on different computing resources with different time limits, will produce different amounts of events. The decision on the number of events to be produced is made just in time at the start of the job, when the capabilities of the resource are known. In order to know how many events a MC job will be instructed to produce, LHCbDIRAC simply requires three values: the CPU-work per event for that type of job, the power of the machine it is running on, and the time left for the job before being killed. Knowing these values, we can estimate the number of events the job will be able to simulate with the available CPU time. This paper will demonstrate that, using this simple but effective solution, LHCb manages to make a more efficient use of the available resources, and that it can easily use new types of resources. An example is represented by resources provided by batch queues, where low-priority MC jobs can be used as "masonry" jobs in multi-jobs pilots. A second example is represented by opportunistic resources with limited available time.

Kinota: An Open-Source NoSQL implementation of OGC SensorThings for large-scale high-resolution real-time environmental monitoring

NASA Astrophysics Data System (ADS)

Miles, B.; Chepudira, K.; LaBar, W.

2017-12-01

The Open Geospatial Consortium (OGC) SensorThings API (STA) specification, ratified in 2016, is a next-generation open standard for enabling real-time communication of sensor data. Building on over a decade of OGC Sensor Web Enablement (SWE) Standards, STA offers a rich data model that can represent a range of sensor and phenomena types (e.g. fixed sensors sensing fixed phenomena, fixed sensors sensing moving phenomena, mobile sensors sensing fixed phenomena, and mobile sensors sensing moving phenomena) and is data agnostic. Additionally, and in contrast to previous SWE standards, STA is developer-friendly, as is evident from its convenient JSON serialization, and expressive OData-based query language (with support for geospatial queries); with its Message Queue Telemetry Transport (MQTT), STA is also well-suited to efficient real-time data publishing and discovery. All these attributes make STA potentially useful for use in environmental monitoring sensor networks. Here we present Kinota(TM), an Open-Source NoSQL implementation of OGC SensorThings for large-scale high-resolution real-time environmental monitoring. Kinota, which roughly stands for Knowledge from Internet of Things Analyses, relies on Cassandra its underlying data store, which is a horizontally scalable, fault-tolerant open-source database that is often used to store time-series data for Big Data applications (though integration with other NoSQL or rational databases is possible). With this foundation, Kinota can scale to store data from an arbitrary number of sensors collecting data every 500 milliseconds. Additionally, Kinota architecture is very modular allowing for customization by adopters who can choose to replace parts of the existing implementation when desirable. The architecture is also highly portable providing the flexibility to choose between cloud providers like azure, amazon, google etc. The scalable, flexible and cloud friendly architecture of Kinota makes it ideal for use in next-generation large-scale and high-resolution real-time environmental monitoring networks used in domains such as hydrology, geomorphology, and geophysics, as well as management applications such as flood early warning, and regulatory enforcement.

77 FR 15095 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-14

.... 3250; Queue No. W2-091 to be effective 2/14/2012. Filed Date: 3/7/12. Accession Number: 20120307-5041.... Description: Original Service Agreement No. 3249; Queue No. W2-088 effective 2/14/2012 [initial submission description misidentified as No. 3250; Queue No. W2-091. Filed Date: 3/7/12. Accession Number: 20120307-5051...

Models of emergency departments for reducing patient waiting times.

PubMed

Laskowski, Marek; McLeod, Robert D; Friesen, Marcia R; Podaima, Blake W; Alfa, Attahiru S

2009-07-02

In this paper, we apply both agent-based models and queuing models to investigate patient access and patient flow through emergency departments. The objective of this work is to gain insights into the comparative contributions and limitations of these complementary techniques, in their ability to contribute empirical input into healthcare policy and practice guidelines. The models were developed independently, with a view to compare their suitability to emergency department simulation. The current models implement relatively simple general scenarios, and rely on a combination of simulated and real data to simulate patient flow in a single emergency department or in multiple interacting emergency departments. In addition, several concepts from telecommunications engineering are translated into this modeling context. The framework of multiple-priority queue systems and the genetic programming paradigm of evolutionary machine learning are applied as a means of forecasting patient wait times and as a means of evolving healthcare policy, respectively. The models' utility lies in their ability to provide qualitative insights into the relative sensitivities and impacts of model input parameters, to illuminate scenarios worthy of more complex investigation, and to iteratively validate the models as they continue to be refined and extended. The paper discusses future efforts to refine, extend, and validate the models with more data and real data relative to physical (spatial-topographical) and social inputs (staffing, patient care models, etc.). Real data obtained through proximity location and tracking system technologies is one example discussed.

Models of Emergency Departments for Reducing Patient Waiting Times

PubMed Central

Laskowski, Marek; McLeod, Robert D.; Friesen, Marcia R.; Podaima, Blake W.; Alfa, Attahiru S.

2009-01-01

In this paper, we apply both agent-based models and queuing models to investigate patient access and patient flow through emergency departments. The objective of this work is to gain insights into the comparative contributions and limitations of these complementary techniques, in their ability to contribute empirical input into healthcare policy and practice guidelines. The models were developed independently, with a view to compare their suitability to emergency department simulation. The current models implement relatively simple general scenarios, and rely on a combination of simulated and real data to simulate patient flow in a single emergency department or in multiple interacting emergency departments. In addition, several concepts from telecommunications engineering are translated into this modeling context. The framework of multiple-priority queue systems and the genetic programming paradigm of evolutionary machine learning are applied as a means of forecasting patient wait times and as a means of evolving healthcare policy, respectively. The models' utility lies in their ability to provide qualitative insights into the relative sensitivities and impacts of model input parameters, to illuminate scenarios worthy of more complex investigation, and to iteratively validate the models as they continue to be refined and extended. The paper discusses future efforts to refine, extend, and validate the models with more data and real data relative to physical (spatial–topographical) and social inputs (staffing, patient care models, etc.). Real data obtained through proximity location and tracking system technologies is one example discussed. PMID:19572015

Queue observing at the Observatoire du Mont-Mégantic 1.6-m telescope

NASA Astrophysics Data System (ADS)

Artigau, Étienne; Lamontagne, Robert; Doyon, René; Malo, Lison

2010-07-01

Queue planning of observation and service observing are generally seen as specific to large, world-class, astronomical observatories that draw proposal from a large community. One of the common grievance, justified or not, against queue planning and service observing is the fear of training a generation of astronomers without hands-on observing experience. At the Observatoire du Mont-Mégantic (OMM) 1.6-m telescope, we are developing a student-run service observing program. Queue planning and service observing are used as training tools to expose students to a variety of scientific project and instruments beyond what they would normally use for their own research project. The queue mode at the OMM specifically targets relatively shallow observations that can be completed in less than a few hours and are too short to justify a multi-night classical observing run.

Accuracy of a real-time surgical navigation system for the placement of quad zygomatic implants in the severe atrophic maxilla: A pilot clinical study.

PubMed

Hung, Kuo-Feng; Wang, Feng; Wang, Hao-Wei; Zhou, Wen-Jie; Huang, Wei; Wu, Yi-Qun

2017-06-01

A real-time surgical navigation system potentially increases the accuracy when used for quad-zygomatic implant placement. To evaluate the accuracy of a real-time surgical navigation system when used for quad zygomatic implant placement. Patients with severely atrophic maxillae were prospectively recruited. Four trajectories for implants were planned, and zygomatic implants were placed using a real-time surgical navigation system. The planned-placed distance deviations at entry (entry deviation）points, exit (exit deviation) points, and angle deviation of axes (angle deviation) were measured on fused operation images. The differences of all the deviations between different groups, classified based on the lengths and locations of implants, were analysed. A P value of < 0.05 indicated statistical significance. Forty zygomatic implants were placed as planned in 10 patients. The entry deviation, exit deviation and angle deviation were 1.35 ± 0.75 mm, 2.15 mm ± 0.95 mm, and 2.05 ± 1.02 degrees, respectively. The differences of all deviations were not significant, irrespective of the lengths (P = .259, .158, and .914, respectively) or locations of the placed implants (P = .698, .072, and .602, respectively). A real-time surgical navigation system used for the placement of quad zygomatic implants demonstrated a high level of accuracy with only minimal planned-placed deviations, irrespective of the lengths or locations of the implants. © 2017 Wiley Periodicals, Inc.

Method, apparatus and system for managing queue operations of a test bench environment

DOEpatents

Ostler, Farrell Lynn

2016-07-19

Techniques and mechanisms for performing dequeue operations for agents of a test bench environment. In an embodiment, a first group of agents are each allocated a respective ripe reservation and a second set of agents are each allocated a respective unripe reservation. Over time, queue management logic allocates respective reservations to agents and variously changes one or more such reservations from unripe to ripe. In another embodiment, an order of servicing agents allocated unripe reservations is based on relative priorities of the unripe reservations with respect to one another. An order of servicing agents allocated ripe reservations is on a first come, first served basis.

GODDESS: A Goal-Directed Decision Structuring System.

DTIC Science & Technology

1980-06-01

differ- ent support techniques. From a practical viewpoint, though, the major drawback of manual interviews is their length and cost. Since real - time ...conducting his future inquiries. A direct man-machine interface could provide three distinct advantages. First, it offers the capability of real - time ...knowledge in tree form. In many real -world applications, the decision maker may not perceive a problem in the form of a time sequence of decision

The congestion control algorithm based on queue management of each node in mobile ad hoc networks

NASA Astrophysics Data System (ADS)

Wei, Yifei; Chang, Lin; Wang, Yali; Wang, Gaoping

2016-12-01

This paper proposes an active queue management mechanism, considering the node's own ability and its importance in the network to set the queue threshold. As the network load increases, local congestion of mobile ad hoc network may lead to network performance degradation, hot node's energy consumption increase even failure. If small energy nodes congested because of forwarding data packets, then when it is used as the source node will cause a lot of packet loss. This paper proposes an active queue management mechanism, considering the node's own ability and its importance in the network to set the queue threshold. Controlling nodes buffer queue in different levels of congestion area probability by adjusting the upper limits and lower limits, thus nodes can adjust responsibility of forwarding data packets according to their own situation. The proposed algorithm will slow down the send rate hop by hop along the data package transmission direction from congestion node to source node so that to prevent further congestion from the source node. The simulation results show that, the algorithm can better play the data forwarding ability of strong nodes, protect the weak nodes, can effectively alleviate the network congestion situation.

Distance correction system for localization based on linear regression and smoothing in ambient intelligence display.

PubMed

Kim, Dae-Hee; Choi, Jae-Hun; Lim, Myung-Eun; Park, Soo-Jun

2008-01-01

This paper suggests the method of correcting distance between an ambient intelligence display and a user based on linear regression and smoothing method, by which distance information of a user who approaches to the display can he accurately output even in an unanticipated condition using a passive infrared VIR) sensor and an ultrasonic device. The developed system consists of an ambient intelligence display and an ultrasonic transmitter, and a sensor gateway. Each module communicates with each other through RF (Radio frequency) communication. The ambient intelligence display includes an ultrasonic receiver and a PIR sensor for motion detection. In particular, this system selects and processes algorithms such as smoothing or linear regression for current input data processing dynamically through judgment process that is determined using the previous reliable data stored in a queue. In addition, we implemented GUI software with JAVA for real time location tracking and an ambient intelligence display.

Minimalism context-aware displays.

PubMed

Cai, Yang

2004-12-01

Despite the rapid development of cyber technologies, today we still have very limited attention and communication bandwidth to process the increasing information flow. The goal of the study is to develop a context-aware filter to match the information load with particular needs and capacities. The functions include bandwidth-resolution trade-off and user context modeling. From the empirical lab studies, it is found that the resolution of images can be reduced in order of magnitude if the viewer knows that he/she is looking for particular features. The adaptive display queue is optimized with real-time operational conditions and user's inquiry history. Instead of measuring operator's behavior directly, ubiquitous computing models are developed to anticipate user's behavior from the operational environment data. A case study of the video stream monitoring for transit security is discussed in the paper. In addition, the author addresses the future direction of coherent human-machine vision systems.

A methodology for direct quantification of over-ranging length in helical computed tomography with real-time dosimetry.

PubMed

Tien, Christopher J; Winslow, James F; Hintenlang, David E

2011-01-31

In helical computed tomography (CT), reconstruction information from volumes adjacent to the clinical volume of interest (VOI) is required for proper reconstruction. Previous studies have relied upon either operator console readings or indirect extrapolation of measurements in order to determine the over-ranging length of a scan. This paper presents a methodology for the direct quantification of over-ranging dose contributions using real-time dosimetry. A Siemens SOMATOM Sensation 16 multislice helical CT scanner is used with a novel real-time "point" fiber-optic dosimeter system with 10 ms temporal resolution to measure over-ranging length, which is also expressed in dose-length-product (DLP). Film was used to benchmark the exact length of over-ranging. Over-ranging length varied from 4.38 cm at pitch of 0.5 to 6.72 cm at a pitch of 1.5, which corresponds to DLP of 131 to 202 mGy-cm. The dose-extrapolation method of Van der Molen et al. yielded results within 3%, while the console reading method of Tzedakis et al. yielded consistently larger over-ranging lengths. From film measurements, it was determined that Tzedakis et al. overestimated over-ranging lengths by one-half of beam collimation width. Over-ranging length measured as a function of reconstruction slice thicknesses produced two linear regions similar to previous publications. Over-ranging is quantified with both absolute length and DLP, which contributes about 60 mGy-cm or about 10% of DLP for a routine abdominal scan. This paper presents a direct physical measurement of over-ranging length within 10% of previous methodologies. Current uncertainties are less than 1%, in comparison with 5% in other methodologies. Clinical implantation can be increased by using only one dosimeter if codependence with console readings is acceptable, with an uncertainty of 1.1% This methodology will be applied to different vendors, models, and postprocessing methods--which have been shown to produce over-ranging lengths differing by 125%.

Validation and Application of a PCR Primer Set to Quantify Fungal Communities in the Soil Environment by Real-Time Quantitative PCR

PubMed Central

Chemidlin Prévost-Bouré, Nicolas; Christen, Richard; Dequiedt, Samuel; Mougel, Christophe; Lelièvre, Mélanie; Jolivet, Claudy; Shahbazkia, Hamid Reza; Guillou, Laure; Arrouays, Dominique; Ranjard, Lionel

2011-01-01

Fungi constitute an important group in soil biological diversity and functioning. However, characterization and knowledge of fungal communities is hampered because few primer sets are available to quantify fungal abundance by real-time quantitative PCR (real-time Q-PCR). The aim in this study was to quantify fungal abundance in soils by incorporating, into a real-time Q-PCR using the SYBRGreen® method, a primer set already used to study the genetic structure of soil fungal communities. To satisfy the real-time Q-PCR requirements to enhance the accuracy and reproducibility of the detection technique, this study focused on the 18S rRNA gene conserved regions. These regions are little affected by length polymorphism and may provide sufficiently small targets, a crucial criterion for enhancing accuracy and reproducibility of the detection technique. An in silico analysis of 33 primer sets targeting the 18S rRNA gene was performed to select the primer set with the best potential for real-time Q-PCR: short amplicon length; good fungal specificity and coverage. The best consensus between specificity, coverage and amplicon length among the 33 sets tested was the primer set FR1 / FF390. This in silico analysis of the specificity of FR1 / FF390 also provided additional information to the previously published analysis on this primer set. The specificity of the primer set FR1 / FF390 for Fungi was validated in vitro by cloning - sequencing the amplicons obtained from a real time Q-PCR assay performed on five independent soil samples. This assay was also used to evaluate the sensitivity and reproducibility of the method. Finally, fungal abundance in samples from 24 soils with contrasting physico-chemical and environmental characteristics was examined and ranked to determine the importance of soil texture, organic carbon content, C∶N ratio and land use in determining fungal abundance in soils. PMID:21931659

APPLICATION OF TRAVEL TIME RELIABILITY FOR PERFORMANCE ORIENTED OPERATIONAL PLANNING OF EXPRESSWAYS

NASA Astrophysics Data System (ADS)

Mehran, Babak; Nakamura, Hideki

Evaluation of impacts of congestion improvement scheme s on travel time reliability is very significant for road authorities since travel time reliability repr esents operational performance of expressway segments. In this paper, a methodology is presented to estimate travel tim e reliability prior to implementation of congestion relief schemes based on travel time variation modeling as a function of demand, capacity, weather conditions and road accident s. For subject expressway segmen ts, traffic conditions are modeled over a whole year considering demand and capacity as random variables. Patterns of demand and capacity are generated for each five minute interval by appl ying Monte-Carlo simulation technique, and accidents are randomly generated based on a model that links acci dent rate to traffic conditions. A whole year analysis is performed by comparing de mand and available capacity for each scenario and queue length is estimated through shockwave analysis for each time in terval. Travel times are estimated from refined speed-flow relationships developed for intercity expressways and buffer time index is estimated consequently as a measure of travel time reliability. For validation, estimated reliability indices are compared with measured values from empirical data, and it is shown that the proposed method is suitable for operational evaluation and planning purposes.

A Queueing Model for Supervisory Control of Unmanned Autonomous Vehicles

DTIC Science & Technology

2013-09-01

Autonomous Vehicles Joseph DiVita, PhD Robert L. Morris Maria Olinda Rodas SSC Pacific Approved...298 (Rev. 8/98) Prescribed by ANSI Std. Z39.18 09–2013 Final A Queueing Model for Supervisory Control of Unmanned Autonomous Vehicles Joseph...Mission Area: Command and Control, Queueing Model; Supervisory Control; Unmanned Autonomous Vehicles M. O. Rodas U U U U 38 (619)

Tutorial in medical decision modeling incorporating waiting lines and queues using discrete event simulation.

PubMed

Jahn, Beate; Theurl, Engelbert; Siebert, Uwe; Pfeiffer, Karl-Peter

2010-01-01

In most decision-analytic models in health care, it is assumed that there is treatment without delay and availability of all required resources. Therefore, waiting times caused by limited resources and their impact on treatment effects and costs often remain unconsidered. Queuing theory enables mathematical analysis and the derivation of several performance measures of queuing systems. Nevertheless, an analytical approach with closed formulas is not always possible. Therefore, simulation techniques are used to evaluate systems that include queuing or waiting, for example, discrete event simulation. To include queuing in decision-analytic models requires a basic knowledge of queuing theory and of the underlying interrelationships. This tutorial introduces queuing theory. Analysts and decision-makers get an understanding of queue characteristics, modeling features, and its strength. Conceptual issues are covered, but the emphasis is on practical issues like modeling the arrival of patients. The treatment of coronary artery disease with percutaneous coronary intervention including stent placement serves as an illustrative queuing example. Discrete event simulation is applied to explicitly model resource capacities, to incorporate waiting lines and queues in the decision-analytic modeling example.

Research on a Queue Scheduling Algorithm in Wireless Communications Network

NASA Astrophysics Data System (ADS)

Yang, Wenchuan; Hu, Yuanmei; Zhou, Qiancai

This paper proposes a protocol QS-CT, Queue Scheduling Mechanism based on Multiple Access in Ad hoc net work, which adds queue scheduling mechanism to RTS-CTS-DATA using multiple access protocol. By endowing different queues different scheduling mechanisms, it makes networks access to the channel much more fairly and effectively, and greatly enhances the performance. In order to observe the final performance of the network with QS-CT protocol, we simulate it and compare it with MACA/C-T without QS-CT protocol. Contrast to MACA/C-T, the simulation result shows that QS-CT has greatly improved the throughput, delay, rate of packets' loss and other key indicators.

Parallel integer sorting with medium and fine-scale parallelism

NASA Technical Reports Server (NTRS)

Dagum, Leonardo

1993-01-01

Two new parallel integer sorting algorithms, queue-sort and barrel-sort, are presented and analyzed in detail. These algorithms do not have optimal parallel complexity, yet they show very good performance in practice. Queue-sort designed for fine-scale parallel architectures which allow the queueing of multiple messages to the same destination. Barrel-sort is designed for medium-scale parallel architectures with a high message passing overhead. The performance results from the implementation of queue-sort on a Connection Machine CM-2 and barrel-sort on a 128 processor iPSC/860 are given. The two implementations are found to be comparable in performance but not as good as a fully vectorized bucket sort on the Cray YMP.

Optimal Service Capacities in a Competitive Multiple-Server Queueing Environment

NASA Astrophysics Data System (ADS)

Ching, Wai-Ki; Choi, Sin-Man; Huang, Min

The study of economic behavior of service providers in a competition environment is an important and interesting research issue. A two-server queueing model has been proposed in Kalai et al. [11] for this purpose. Their model aims at studying the role and impact of service capacity in capturing larger market share so as to maximize the long-run expected profit. They formulate the problem as a two-person strategic game and analyze the equilibrium solutions. The main aim of this paper is to extend the results of the two-server queueing model in [11] to the case of multiple servers. We will only focus on the case when the queueing system is stable.

Queued History based Mediator Identification for an Incentive Attached peer to peer Electronic Coupon System

NASA Astrophysics Data System (ADS)

Shojima, Taiki; Ikkai, Yoshitomo; Komoda, Norihisa

An incentive attached peer to peer (P2P) electronic coupon system is proposed in which users forward e-coupons to potential users by providing incentives to those mediators. A service provider needs to acquire distribution history for incentive payment by recording UserIDs (UIDs) in the e-coupons, since this system is intended for pure P2P environment. This causes problems of dishonestly altering distribution history. In order to solve such problems, distribution history is realized in a couple of queues structure. They are the UID queue, and the public key queue. Each element of the UID queue at the initial state consists of index, a secret key, and a digital signature. In recording one's UID, the encrypted UID is enqueued to the UID queue with a new digital signature created by a secret key of the dequeued element, so that each UID cannot be altered. The public key queue provides the functionality of validating digital signatures on mobile devices. This method makes it possible both each UID and sequence of them to be certificated. The availability of the method is evaluated by quantifying risk reduction using Fault Tree Analysis (FTA). And it's recognized that the method is better than common encryption methods.

Social stability and helping in small animal societies

PubMed Central

Field, Jeremy; Cant, Michael A.

2009-01-01

In primitively eusocial societies, all individuals can potentially reproduce independently. The key fact that we focus on in this paper is that individuals in such societies instead often queue to inherit breeding positions. Queuing leads to systematic differences in expected future fitness. We first discuss the implications this has for variation in behaviour. For example, because helpers nearer to the front of the queue have more to lose, they should work less hard to rear the dominant's offspring. However, higher rankers may be more aggressive than low rankers, even if they risk injury in the process, if aggression functions to maintain or enhance queue position. Second, we discuss how queuing rules may be enforced through hidden threats that rarely have to be carried out. In fishes, rule breakers face the threat of eviction from the group. In contrast, subordinate paper wasps are not injured or evicted during escalated challenges against the dominant, perhaps because they are more valuable to the dominant. We discuss evidence that paper-wasp dominants avoid escalated conflicts by ceding reproduction to subordinates. Queuing rules appear usually to be enforced by individuals adjacent in the queue rather than by dominants. Further manipulative studies are required to reveal mechanisms underlying queue stability and to elucidate what determines queue position in the first place. PMID:19805426

BioQueue: a novel pipeline framework to accelerate bioinformatics analysis.

PubMed

Yao, Li; Wang, Heming; Song, Yuanyuan; Sui, Guangchao

2017-10-15

With the rapid development of Next-Generation Sequencing, a large amount of data is now available for bioinformatics research. Meanwhile, the presence of many pipeline frameworks makes it possible to analyse these data. However, these tools concentrate mainly on their syntax and design paradigms, and dispatch jobs based on users' experience about the resources needed by the execution of a certain step in a protocol. As a result, it is difficult for these tools to maximize the potential of computing resources, and avoid errors caused by overload, such as memory overflow. Here, we have developed BioQueue, a web-based framework that contains a checkpoint before each step to automatically estimate the system resources (CPU, memory and disk) needed by the step and then dispatch jobs accordingly. BioQueue possesses a shell command-like syntax instead of implementing a new script language, which means most biologists without computer programming background can access the efficient queue system with ease. BioQueue is freely available at https://github.com/liyao001/BioQueue. The extensive documentation can be found at http://bioqueue.readthedocs.io. li_yao@outlook.com or gcsui@nefu.edu.cn. Supplementary data are available at Bioinformatics online. © The Author (2017). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Real-time interferometric diagnostics of rubidium plasma

NASA Astrophysics Data System (ADS)

Djotyan, G. P.; Bakos, J. S.; Kedves, M. Á.; Ráczkevi, B.; Dzsotjan, D.; Varga-Umbrich, K.; Sörlei, Zs.; Szigeti, J.; Ignácz, P.; Lévai, P.; Czitrovszky, A.; Nagy, A.; Dombi, P.; Rácz, P.

2018-03-01

A method of interferometric real-time diagnostics is developed and applied to rubidium plasma created by strong laser pulses in the femtosecond duration range at different initial rubidium vapor densities using a Michelson-type interferometer. A cosine fit with an exponentially decaying relative phase is applied to the obtained time-dependent interferometry signals to measure the density-length product of the created plasma and its recombination time constant. The presented technique may be applicable for real-time measurements of rubidium plasma dynamics in the AWAKE experiment at CERN, as well as for real-time diagnostics of plasmas created in different gaseous media and on surfaces of solid targets.

Dynamic resource allocation scheme for distributed heterogeneous computer systems

NASA Technical Reports Server (NTRS)

Liu, Howard T. (Inventor); Silvester, John A. (Inventor)

1991-01-01

This invention relates to a resource allocation in computer systems, and more particularly, to a method and associated apparatus for shortening response time and improving efficiency of a heterogeneous distributed networked computer system by reallocating the jobs queued up for busy nodes to idle, or less-busy nodes. In accordance with the algorithm (SIDA for short), the load-sharing is initiated by the server device in a manner such that extra overhead in not imposed on the system during heavily-loaded conditions. The algorithm employed in the present invention uses a dual-mode, server-initiated approach. Jobs are transferred from heavily burdened nodes (i.e., over a high threshold limit) to low burdened nodes at the initiation of the receiving node when: (1) a job finishes at a node which is burdened below a pre-established threshold level, or (2) a node is idle for a period of time as established by a wakeup timer at the node. The invention uses a combination of the local queue length and the local service rate ratio at each node as the workload indicator.

Berkeley lab checkpoint/restart (BLCR) for Linux clusters

DOE PAGES

Hargrove, Paul H.; Duell, Jason C.

2006-09-01

This article describes the motivation, design and implementation of Berkeley Lab Checkpoint/Restart (BLCR), a system-level checkpoint/restart implementation for Linux clusters that targets the space of typical High Performance Computing applications, including MPI. Application-level solutions, including both checkpointing and fault-tolerant algorithms, are recognized as more time and space efficient than system-level checkpoints, which cannot make use of any application-specific knowledge. However, system-level checkpointing allows for preemption, making it suitable for responding to fault precursors (for instance, elevated error rates from ECC memory or network CRCs, or elevated temperature from sensors). Preemption can also increase the efficiency of batch scheduling; for instancemore » reducing idle cycles (by allowing for shutdown without any queue draining period or reallocation of resources to eliminate idle nodes when better fitting jobs are queued), and reducing the average queued time (by limiting large jobs to running during off-peak hours, without the need to limit the length of such jobs). Each of these potential uses makes BLCR a valuable tool for efficient resource management in Linux clusters. © 2006 IOP Publishing Ltd.« less

Scheduling admissions and reducing variability in bed demand.

PubMed

Bekker, René; Koeleman, Paulien M

2011-09-01

Variability in admissions and lengths of stay inherently leads to variability in bed occupancy. The aim of this paper is to analyse the impact of these sources of variability on the required amount of capacity and to determine admission quota for scheduled admissions to regulate the occupancy pattern. For the impact of variability on the required number of beds, we use a heavy-traffic limit theorem for the G/G/∞ queue yielding an intuitively appealing approximation in case the arrival process is not Poisson. Also, given a structural weekly admission pattern, we apply a time-dependent analysis to determine the mean offered load per day. This time-dependent analysis is combined with a Quadratic Programming model to determine the optimal number of elective admissions per day, such that an average desired daily occupancy is achieved. From the mathematical results, practical scenarios and guidelines are derived that can be used by hospital managers and support the method of quota scheduling. In practice, the results can be implemented by providing admission quota prescribing the target number of admissions for each patient group.

Benefits Assessment for Tactical Runway Configuration Management Tool

NASA Technical Reports Server (NTRS)

Oseguera-Lohr, Rosa; Phojanamongkolkij, Nipa; Lohr, Gary; Fenbert, James W.

2013-01-01

The Tactical Runway Configuration Management (TRCM) software tool was developed to provide air traffic flow managers and supervisors with recommendations for airport configuration changes and runway usage. The objective for this study is to conduct a benefits assessment at Memphis (MEM), Dallas Fort-Worth (DFW) and New York's John F. Kennedy (JFK) airports using the TRCM tool. Results from simulations using the TRCM-generated runway configuration schedule are compared with results using historical schedules. For the 12 days of data used in this analysis, the transit time (arrival fix to spot on airport movement area for arrivals, or spot to departure fix for departures) for MEM departures is greater (7%) than for arrivals (3%); for JFK, there is a benefit for arrivals (9%) but not for departures (-2%); for DFW, arrivals show a slight benefit (1%), but this is offset by departures (-2%). Departure queue length benefits show fewer aircraft in queue for JFK (29%) and MEM (11%), but not for DFW (-13%). Fuel savings for surface operations at MEM are seen for both arrivals and departures. At JFK there are fuel savings for arrivals, but these are offset by increased fuel use for departures. In this study, no surface fuel benefits resulted for DFW. Results suggest that the TRCM algorithm requires modifications for complex surface traffic operations that can cause taxi delays. For all three airports, the average number of changes in flow direction (runway configuration) recommended by TRCM was many times greater than the historical data; TRCM would need to be adapted to a particular airport's needs, to limit the number of changes to acceptable levels. The results from this analysis indicate the TRCM tool can provide benefits at some high-capacity airports. The magnitude of these benefits depends on many airport-specific factors and would require adaptation of the TRCM tool; a detailed assessment is needed prior to determining suitability for a particular airport.

Traffic signal coordination and queue management in oversaturated intersection.

DOT National Transportation Integrated Search

2011-03-18

Traffic signal timing optimization when done properly, could significantly improve network : performance by reducing delay, increasing network throughput, reducing number of stops, or : increasing average speed in the network. The optimization can be...

Traffic signal coordination and queue management in oversaturated intersections.

DOT National Transportation Integrated Search

2011-03-18

Traffic signal timing optimization when done properly, could significantly improve network performance by reducing delay, increasing network throughput, reducing number of stops, or increasing average speed in the network. The optimization can become...

The relationship between (stigmatizing) views and lay public preferences regarding tuberculosis treatment in the Eastern Cape, South Africa.

PubMed

Cramm, Jane M; Nieboer, Anna P

2011-01-14

Tuberculosis (TB) and human immune virus/acquired immune deficiency syndrome (HIV/AIDS) stigmas affect public attitudes toward TB treatment and policy. This study examined 'stigmatizing' ideas and the view that 'TB patients should line-up in the chronic illness queue' in relation to preferences and attitudes toward TB treatment. Data were gathered through a survey administered to respondents from 1,020 households in Grahamstown. The survey measured stigmatization surrounding TB and HIV/AIDS, and determined perceptions of respondents whether TB patients should queue with other chronically ill patients. Respondents selected support and treatment options they felt would benefit TB patients. Statistical analysis identified the prevalence of TB and HIV/AIDS stigmas. Logistic regression analyses explored associations between stigmatizing ideas, views regarding TB patients in the chronic illness queue, and attitudes toward support and treatment. Respondents with TB stigmatizing ideas held positive attitudes toward volunteer support, special TB queues, and treatment at clinics; they held negative attitudes toward temporary disability grants, provision of information at work or school, and treatment at the TB hospital. Respondents who felt it beneficial for TB patients to queue with other chronically ill patients conversely held positive attitudes toward provision of porridge and disability grants, and treatment at the TB hospital; they held negative attitudes toward volunteer support, special TB queues, information provision at work or school, and treatment at clinics. These results showed that two varying views related to visibility factors that expose patients to stigmatization (one characterized by TB stigma, the other by the view that TB patients should queue with other chronically ill patients) are associated with opposing attitudes and preferences towards TB treatment. These opposing attitudes complicate treatment outcomes, and suggest that complex behaviors must be taken into account when designing health policy.

Consultation sequencing of a hospital with multiple service points using genetic programming

NASA Astrophysics Data System (ADS)

Morikawa, Katsumi; Takahashi, Katsuhiko; Nagasawa, Keisuke

2018-07-01

A hospital with one consultation room operated by a physician and several examination rooms is investigated. Scheduled patients and walk-ins arrive at the hospital, each patient goes to the consultation room first, and some of them visit other service points before consulting the physician again. The objective function consists of the sum of three weighted average waiting times. The problem of sequencing patients for consultation is focused. To alleviate the stress of waiting, the consultation sequence is displayed. A dispatching rule is used to decide the sequence, and best rules are explored by genetic programming (GP). The simulation experiments indicate that the rules produced by GP can be reduced to simple permutations of queues, and the best permutation depends on the weight used in the objective function. This implies that a balanced allocation of waiting times can be achieved by ordering the priority among three queues.

Production Task Queue Optimization Based on Multi-Attribute Evaluation for Complex Product Assembly Workshop.

PubMed

Li, Lian-Hui; Mo, Rong

2015-01-01

The production task queue has a great significance for manufacturing resource allocation and scheduling decision. Man-made qualitative queue optimization method has a poor effect and makes the application difficult. A production task queue optimization method is proposed based on multi-attribute evaluation. According to the task attributes, the hierarchical multi-attribute model is established and the indicator quantization methods are given. To calculate the objective indicator weight, criteria importance through intercriteria correlation (CRITIC) is selected from three usual methods. To calculate the subjective indicator weight, BP neural network is used to determine the judge importance degree, and then the trapezoid fuzzy scale-rough AHP considering the judge importance degree is put forward. The balanced weight, which integrates the objective weight and the subjective weight, is calculated base on multi-weight contribution balance model. The technique for order preference by similarity to an ideal solution (TOPSIS) improved by replacing Euclidean distance with relative entropy distance is used to sequence the tasks and optimize the queue by the weighted indicator value. A case study is given to illustrate its correctness and feasibility.

Production Task Queue Optimization Based on Multi-Attribute Evaluation for Complex Product Assembly Workshop

PubMed Central

Li, Lian-hui; Mo, Rong

2015-01-01

The production task queue has a great significance for manufacturing resource allocation and scheduling decision. Man-made qualitative queue optimization method has a poor effect and makes the application difficult. A production task queue optimization method is proposed based on multi-attribute evaluation. According to the task attributes, the hierarchical multi-attribute model is established and the indicator quantization methods are given. To calculate the objective indicator weight, criteria importance through intercriteria correlation (CRITIC) is selected from three usual methods. To calculate the subjective indicator weight, BP neural network is used to determine the judge importance degree, and then the trapezoid fuzzy scale-rough AHP considering the judge importance degree is put forward. The balanced weight, which integrates the objective weight and the subjective weight, is calculated base on multi-weight contribution balance model. The technique for order preference by similarity to an ideal solution (TOPSIS) improved by replacing Euclidean distance with relative entropy distance is used to sequence the tasks and optimize the queue by the weighted indicator value. A case study is given to illustrate its correctness and feasibility. PMID:26414758

Why wait so long for child care? An analysis of waits, queues and work in a South African urban health centre.

PubMed

Bachmann, M O; Barron, P

1997-01-01

Long waits at large urban clinics obstruct primary care delivery, imposing time costs on patients, deterring appropriate utilization and causing patient dissatisfaction. This paper reports on an innovative attempt by staff in a large South African urban health centre to analyse a system of queues and preventive and curative services for pre-school children, and thereafter to evaluate changes. The study had a cross-sectional work study design, with repeated measurement of waiting times after 13 months. At baseline the preventive clinic was found to have several inessential processes and waits; these were eliminated or overlapped, and clinic sessions per week were increased. A year later median waiting times had decreased substantially in the preventive clinic, but had increased in the curative clinic. Simple research can explain long waits, inform and measure changes, and provide evidence to justify primary care integration and would be useful in health centres and hospital outpatient departments in developing countries.

Infinite capacity multi-server queue with second optional service channel

NASA Astrophysics Data System (ADS)

Ke, Jau-Chuan; Wu, Chia-Huang; Pearn, Wen Lea

2013-02-01

This paper deals with an infinite-capacity multi-server queueing system with a second optional service (SOS) channel. The inter-arrival times of arriving customers, the service times of the first essential service (FES) and the SOS channel are all exponentially distributed. A customer may leave the system after the FES channel with probability (1-θ), or at the completion of the FES may immediately require a SOS with probability θ (0 <= θ <= 1). The formulae for computing the rate matrix and stationary probabilities are derived by means of a matrix analytical approach. A cost model is developed to determine the optimal values of the number of servers and the two service rates, simultaneously, at the minimal total expected cost per unit time. Quasi-Newton method are employed to deal with the optimization problem. Under optimal operating conditions, numerical results are provided in which several system performance measures are calculated based on assumed numerical values of the system parameters.

Combining multi-layered bitmap files using network specific hardware

DOEpatents

DuBois, David H [Los Alamos, NM; DuBois, Andrew J [Santa Fe, NM; Davenport, Carolyn Connor [Los Alamos, NM

2012-02-28

Images and video can be produced by compositing or alpha blending a group of image layers or video layers. Increasing resolution or the number of layers results in increased computational demands. As such, the available computational resources limit the images and videos that can be produced. A computational architecture in which the image layers are packetized and streamed through processors can be easily scaled so to handle many image layers and high resolutions. The image layers are packetized to produce packet streams. The packets in the streams are received, placed in queues, and processed. For alpha blending, ingress queues receive the packetized image layers which are then z sorted and sent to egress queues. The egress queue packets are alpha blended to produce an output image or video.

Triage for coronary artery bypass graft surgery in Canada: do patients agree on who should come first?

PubMed

Shufelt, Katy; Chong, Alice; Alter, David A

2007-07-25

The extent to which clinical and non-clinical factors impact on the waiting-list prioritization preferences of patients in the queue is unknown. Using a series of hypothetical scenarios, the objective of this study was to examine the extent to which clinical and non-clinical factors impacted on how patients would prioritize others relative to themselves in the coronary artery bypass surgical queue. Ninety-one consecutive eligible patients awaiting coronary artery bypass grafting surgery at Sunnybrook Health Sciences Centre (median waiting-time duration prior to survey of 8 weeks) were given a self-administered survey consisting of nine scenarios in which clinical and non-clinical characteristic profiles of hypothetical patients (also awaiting coronary artery bypass surgery) were varied. For each scenario, patients were asked where in the queue such hypothetical patients should be placed relative to themselves. The eligible response rate was 65% (59/91). Most respondents put themselves marginally ahead of a hypothetical patient with identical clinical and non-clinical characteristics as themselves. There was a strong tendency for respondents to place patients of higher clinical acuity ahead of themselves in the queue (P < 0.0001). Social independence among young individuals was a positively valued attribute (P < 0.0001), but neither age per se nor financial status, directly impacted on patients waiting-list priority preferences. While patient perceptions generally reaffirmed a bypass surgical triage process based on principals of equity and clinical acuity, the valuation of social independence may justify further debate with regard to the inclusion of non-clinical factors in waiting-list prioritization management systems in Canada, as elsewhere.

Improving Block-level Efficiency with scsi-mq

DOE Office of Scientific and Technical Information (OSTI.GOV)

Caldwell, Blake A

2015-01-01

Current generation solid-state storage devices are exposing a new bottlenecks in the SCSI and block layers of the Linux kernel, where IO throughput is limited by lock contention, inefficient interrupt handling, and poor memory locality. To address these limitations, the Linux kernel block layer underwent a major rewrite with the blk-mq project to move from a single request queue to a multi-queue model. The Linux SCSI subsystem rework to make use of this new model, known as scsi-mq, has been merged into the Linux kernel and work is underway for dm-multipath support in the upcoming Linux 4.0 kernel. These piecesmore » were necessary to make use of the multi-queue block layer in a Lustre parallel filesystem with high availability requirements. We undertook adding support of the 3.18 kernel to Lustre with scsi-mq and dm-multipath patches to evaluate the potential of these efficiency improvements. In this paper we evaluate the block-level performance of scsi-mq with backing storage hardware representative of a HPC-targerted Lustre filesystem. Our findings show that SCSI write request latency is reduced by as much as 13.6%. Additionally, when profiling the CPU usage of our prototype Lustre filesystem, we found that CPU idle time increased by a factor of 7 with Linux 3.18 and blk-mq as compared to a standard 2.6.32 Linux kernel. Our findings demonstrate increased efficiency of the multi-queue block layer even with disk-based caching storage arrays used in existing parallel filesystems.« less

Performance modeling for large database systems

NASA Astrophysics Data System (ADS)

Schaar, Stephen; Hum, Frank; Romano, Joe

1997-02-01

One of the unique approaches Science Applications International Corporation took to meet performance requirements was to start the modeling effort during the proposal phase of the Interstate Identification Index/Federal Bureau of Investigations (III/FBI) project. The III/FBI Performance Model uses analytical modeling techniques to represent the III/FBI system. Inputs to the model include workloads for each transaction type, record size for each record type, number of records for each file, hardware envelope characteristics, engineering margins and estimates for software instructions, memory, and I/O for each transaction type. The model uses queuing theory to calculate the average transaction queue length. The model calculates a response time and the resources needed for each transaction type. Outputs of the model include the total resources needed for the system, a hardware configuration, and projected inherent and operational availability. The III/FBI Performance Model is used to evaluate what-if scenarios and allows a rapid response to engineering change proposals and technical enhancements.

Adenoma detection rate is not influenced by full-day blocks, time, or modified queue position.

PubMed

Lurix, Einar; Hernandez, Adrian V; Thoma, Matthew; Castro, Fernando

2012-04-01

Recent studies have shown the adenoma detection rate (ADR) to decrease from endoscopist fatigue. Our primary objective was to evaluate the afternoon ADR in half-day versus full-day blocks. Secondary objectives were to determine whether time or complexity of prior procedures (modified queue position) influence ADR. Retrospective chart review on consecutive colonoscopies. Tertiary-care teaching hospital. This study involved all patients in our database who were over age 45 and who underwent screening and surveillance colonoscopies. ADR. A total of 3085 patients were included in the study, with an overall 31% ADR. Of these procedures, 2148 (70%) were done in the morning, and 937 (30%) were done in the afternoon (512 full-day block, 425 half-day block). By multivariate analysis, there was no difference in ADR between full-day blocks compared with afternoon-only blocks (35% vs 32%; odds ratio [OR] 1.1; 95% confidence interval [CI], 0.8-1.5; P = .2). For all afternoon colonoscopies, no decrease in ADR was noted with increasing queue position (P = .9) or time (P = .3). In addition, no difference was found comparing ADR between all afternoon colonoscopies versus morning colonoscopies (33% vs 30%; OR 1.1; CI, 1.0-1.3; P = .1). No difference was found for advanced adenomas and number of adenomas between either afternoon-only blocks versus afternoon colonoscopy in full-day blocks or morning versus all afternoon cases. Retrospective study; not all withdrawal times were recorded; trainees performed some of the procedures. Our data show that colonoscopy can be performed in full-day blocks and 30-minute slots without compromising ADR. Copyright © 2012 American Society for Gastrointestinal Endoscopy. Published by Mosby, Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duchaineau, M.; Wolinsky, M.; Sigeti, D.E.

Terrain visualization is a difficult problem for applications requiring accurate images of large datasets at high frame rates, such as flight simulation and ground-based aircraft testing using synthetic sensor stimulation. On current graphics hardware, the problem is to maintain dynamic, view-dependent triangle meshes and texture maps that produce good images at the required frame rate. We present an algorithm for constructing triangle meshes that optimizes flexible view-dependent error metrics, produces guaranteed error bounds, achieves specified triangle counts directly, and uses frame-to-frame coherence to operate at high frame rates for thousands of triangles per frame. Our method, dubbed Real-time Optimally Adaptingmore » Meshes (ROAM), uses two priority queues to drive split and merge operations that maintain continuous triangulations built from pre-processed bintree triangles. We introduce two additional performance optimizations: incremental triangle stripping and priority-computation deferral lists. ROAM execution time is proportionate to the number of triangle changes per frame, which is typically a few percent of the output mesh size, hence ROAM performance is insensitive to the resolution and extent of the input terrain. Dynamic terrain and simple vertex morphing are supported.« less

Steady-State Algorithmic Analysis M/M/c Two-Priority Queues with Heterogeneous Rates.

DTIC Science & Technology

1981-04-21

ALGORITHMIC ANALYSIS OF M/M/c TWO-PRIORITY QUEUES WITH HETEROGENEOUS RATES by Douglas R. Miller An algorithm for steady-state analysis of M/M/c nonpreemptive ...practical algorithm for systems involving more than two priority classes. The preemptive case is simpler than the nonpreemptive case; an algorithm for it...priority nonpreemptive queueing system with arrival rates 1 and X2 and service rates V and p42 * The state space can be described as follows. Let xi,j,k be

Convergence of a Queueing System in Heavy Traffic with General Abandonment Distributions

DTIC Science & Technology

2010-10-08

3 in Reiman [27]. We circumvent the use of Reiman’s “Snap-shot Principle” and a comparison result with a non-abandoning queue used in Reed and Ward...4):2606–2650, 2005. 37 [5] R. Atar, A. Mandelbaum, and M. I. Reiman . Scheduling a multi class queue with many exponential servers: asymptotic... Reiman Designing a call center with impatient cus- tomers. Manufacturing and Service Oper. Management, 4(1A):208–227, 2002. [15] J. M. George and J. M

Event management for large scale event-driven digital hardware spiking neural networks.

PubMed

Caron, Louis-Charles; D'Haene, Michiel; Mailhot, Frédéric; Schrauwen, Benjamin; Rouat, Jean

2013-09-01

The interest in brain-like computation has led to the design of a plethora of innovative neuromorphic systems. Individually, spiking neural networks (SNNs), event-driven simulation and digital hardware neuromorphic systems get a lot of attention. Despite the popularity of event-driven SNNs in software, very few digital hardware architectures are found. This is because existing hardware solutions for event management scale badly with the number of events. This paper introduces the structured heap queue, a pipelined digital hardware data structure, and demonstrates its suitability for event management. The structured heap queue scales gracefully with the number of events, allowing the efficient implementation of large scale digital hardware event-driven SNNs. The scaling is linear for memory, logarithmic for logic resources and constant for processing time. The use of the structured heap queue is demonstrated on a field-programmable gate array (FPGA) with an image segmentation experiment and a SNN of 65,536 neurons and 513,184 synapses. Events can be processed at the rate of 1 every 7 clock cycles and a 406×158 pixel image is segmented in 200 ms. Copyright © 2013 Elsevier Ltd. All rights reserved.

Markovian queue optimisation analysis with an unreliable server subject to working breakdowns and impatient customers

NASA Astrophysics Data System (ADS)

Liou, Cheng-Dar

2015-09-01

This study investigates an infinite capacity Markovian queue with a single unreliable service station, in which the customers may balk (do not enter) and renege (leave the queue after entering). The unreliable service station can be working breakdowns even if no customers are in the system. The matrix-analytic method is used to compute the steady-state probabilities for the number of customers, rate matrix and stability condition in the system. The single-objective model for cost and bi-objective model for cost and expected waiting time are derived in the system to fit in with practical applications. The particle swarm optimisation algorithm is implemented to find the optimal combinations of parameters in the pursuit of minimum cost. Two different approaches are used to identify the Pareto optimal set and compared: the epsilon-constraint method and non-dominate sorting genetic algorithm. Compared results allow using the traditional optimisation approach epsilon-constraint method, which is computationally faster and permits a direct sensitivity analysis of the solution under constraint or parameter perturbation. The Pareto front and non-dominated solutions set are obtained and illustrated. The decision makers can use these to improve their decision-making quality.

The cloud paradigm applied to e-Health.

PubMed

Vilaplana, Jordi; Solsona, Francesc; Abella; Filgueira, Rosa; Rius, Josep

2013-03-14

Cloud computing is a new paradigm that is changing how enterprises, institutions and people understand, perceive and use current software systems. With this paradigm, the organizations have no need to maintain their own servers, nor host their own software. Instead, everything is moved to the cloud and provided on demand, saving energy, physical space and technical staff. Cloud-based system architectures provide many advantages in terms of scalability, maintainability and massive data processing. We present the design of an e-health cloud system, modelled by an M/M/m queue with QoS capabilities, i.e. maximum waiting time of requests. Detailed results for the model formed by a Jackson network of two M/M/m queues from the queueing theory perspective are presented. These results show a significant performance improvement when the number of servers increases. Platform scalability becomes a critical issue since we aim to provide the system with high Quality of Service (QoS). In this paper we define an architecture capable of adapting itself to different diseases and growing numbers of patients. This platform could be applied to the medical field to greatly enhance the results of those therapies that have an important psychological component, such as addictions and chronic diseases.

A Closed Network Queue Model of Underground Coal Mining Production, Failure, and Repair

NASA Technical Reports Server (NTRS)

Lohman, G. M.

1978-01-01

Underground coal mining system production, failures, and repair cycles were mathematically modeled as a closed network of two queues in series. The model was designed to better understand the technological constraints on availability of current underground mining systems, and to develop guidelines for estimating the availability of advanced mining systems and their associated needs for spares as well as production and maintenance personnel. It was found that: mine performance is theoretically limited by the maintainability ratio, significant gains in availability appear possible by means of small improvements in the time between failures the number of crews and sections should be properly balanced for any given maintainability ratio, and main haulage systems closest to the mine mouth require the most attention to reliability.

Physics of traffic gridlock in a city.

PubMed

Kerner, Boris S

2011-10-01

Based on simulations of stochastic three-phase and two-phase traffic flow models, we reveal that at a signalized city intersection under small link inflow rates at which a vehicle queue developed during the red phase of the light signal dissolves fully during the green phase, i.e., no traffic gridlock should be expected, nevertheless, spontaneous traffic breakdown with subsequent city gridlock occurs with some probability after a random time delay. In most cases, this traffic breakdown is initiated by a phase transition from free flow to a synchronized flow occurring upstream of the queue at the light signal. The probability of traffic breakdown at the light signal is an increasing function of the link inflow rate and duration of the red phase of the light signal.

32 CFR 1800.33 - Allocation of resources; agreed extensions of time.

Code of Federal Regulations, 2010 CFR

2010-07-01

... strictly “first-in, first-out” basis and utilizing two or more processing queues to ensure that smaller as... Coordinator is responsible for management of the NACIC-wide program defined by this part and for establishing...

32 CFR 1801.33 - Allocation of resources; agreed extensions of time.

Code of Federal Regulations, 2010 CFR

2010-07-01

...” basis and utilizing two or more processing queues to ensure that smaller as well as larger (i.e... management of the NACIC-wide program defined by this part and for establishing priorities for cases...

New technology for ultrasensitive detection and isolation of rare cells for clinical diagnostics and therapeutics

NASA Astrophysics Data System (ADS)

Leary, James F.; McLaughlin, Scott R.

1995-04-01

A high-speed, 11-parameter, 6-color fluorescence, laser flow cytometer/cell sorter with a number of special and unique features has been built for ultrasensitive detection and isolation of rare cells for clinical diagnostics and therapeutics. The software for real-time data acquisition and sort control, written as C++ programming language modules with a WindowsTM graphical user interface, runs on a 66-MHz 80486 computer joined by an extended bus to 23 sophisticated multi-layered boards of special data acquisition and sorting electronics. Special features include: high-speed (> 100,000 cells/sec) real-time data classification module (U.S. Patent 5,204,884 (1993)); real-time principal component cell sorting; multi-queue signal-processing system with multiple hardware and software event buffers to reduce instrument dead time, LUT charge-pulse definition, high-resolution `flexible' sorting for optimal yield/purity sort strategies (U.S. Patent 5,199,576); pre-focusing optical wavelength correction for a second laser beam; and two trains of three fluorescence detectors-- each adjustable for spatial separation to interrogate only one of two laser beams, syringe- driven or pressure-driven fluidics, and time-windowed parameters. The system has been built to be both expandable and versatile through the use of LUT's and a modular hardware and software design. The instrument is especially useful at detection and isolation of rare cell subpopulations for which our laboratory is well-known. Cell subpopulations at frequencies as small as 10-7 have been successfully studied with this system. Current applications in clinical diagnostics and therapeutics include detection and isolation of (1) fetal cells from material blood for prenatal diagnosis of birth defects, (2) hematopoietic stem and precursor cells for autologous bone marrow transplantation, (3) metastatic breast cancer cells for molecular characterization, and (4) HIV-infected maternal cells in newborn blood to study mother-to-infant vertical transmission of AIDS.

Characterizing MPI matching via trace-based simulation

DOE PAGES

Ferreira, Kurt Brian; Levy, Scott Larson Nicoll; Pedretti, Kevin; ...

2017-01-01

With the increased scale expected on future leadership-class systems, detailed information about the resource usage and performance of MPI message matching provides important insights into how to maintain application performance on next-generation systems. However, obtaining MPI message matching performance data is often not possible without significant effort. A common approach is to instrument an MPI implementation to collect relevant statistics. While this approach can provide important data, collecting matching data at runtime perturbs the application's execution, including its matching performance, and is highly dependent on the MPI library's matchlist implementation. In this paper, we introduce a trace-based simulation approach tomore » obtain detailed MPI message matching performance data for MPI applications without perturbing their execution. Using a number of key parallel workloads, we demonstrate that this simulator approach can rapidly and accurately characterize matching behavior. Specifically, we use our simulator to collect several important statistics about the operation of the MPI posted and unexpected queues. For example, we present data about search lengths and the duration that messages spend in the queues waiting to be matched. Here, data gathered using this simulation-based approach have significant potential to aid hardware designers in determining resource allocation for MPI matching functions and provide application and middleware developers with insight into the scalability issues associated with MPI message matching.« less

Operational evaluation of high-throughput community-based mass prophylaxis using Just-in-time training.

PubMed

Spitzer, James D; Hupert, Nathaniel; Duckart, Jonathan; Xiong, Wei

2007-01-01

Community-based mass prophylaxis is a core public health operational competency, but staffing needs may overwhelm the local trained health workforce. Just-in-time (JIT) training of emergency staff and computer modeling of workforce requirements represent two complementary approaches to address this logistical problem. Multnomah County, Oregon, conducted a high-throughput point of dispensing (POD) exercise to test JIT training and computer modeling to validate POD staffing estimates. The POD had 84% non-health-care worker staff and processed 500 patients per hour. Post-exercise modeling replicated observed staff utilization levels and queue formation, including development and amelioration of a large medical evaluation queue caused by lengthy processing times and understaffing in the first half-hour of the exercise. The exercise confirmed the feasibility of using JIT training for high-throughput antibiotic dispensing clinics staffed largely by nonmedical professionals. Patient processing times varied over the course of the exercise, with important implications for both staff reallocation and future POD modeling efforts. Overall underutilization of staff revealed the opportunity for greater efficiencies and even higher future throughputs.

Ordering of guarded and unguarded stores for no-sync I/O

DOEpatents

Gara, Alan; Ohmacht, Martin

2013-06-25

A parallel computing system processes at least one store instruction. A first processor core issues a store instruction. A first queue, associated with the first processor core, stores the store instruction. A second queue, associated with a first local cache memory device of the first processor core, stores the store instruction. The first processor core updates first data in the first local cache memory device according to the store instruction. The third queue, associated with at least one shared cache memory device, stores the store instruction. The first processor core invalidates second data, associated with the store instruction, in the at least one shared cache memory. The first processor core invalidates third data, associated with the store instruction, in other local cache memory devices of other processor cores. The first processor core flushing only the first queue.

[Organization of patient intake at private dental institutions].

PubMed

Miniaev, V A; Vishniakov, N I; Mchedlidze, T Sh; Kuraskua, A A; Stozharov, V V

1998-01-01

Scientifically-based organization of consultations and treatment of patients at dental institutions is proposed, based on the balance between the time spent by patients in the queue and the equipment downtime. The proposed organization will decrease the total duration of treatment.

Research on elastic resource management for multi-queue under cloud computing environment

NASA Astrophysics Data System (ADS)

CHENG, Zhenjing; LI, Haibo; HUANG, Qiulan; Cheng, Yaodong; CHEN, Gang

2017-10-01

As a new approach to manage computing resource, virtualization technology is more and more widely applied in the high-energy physics field. A virtual computing cluster based on Openstack was built at IHEP, using HTCondor as the job queue management system. In a traditional static cluster, a fixed number of virtual machines are pre-allocated to the job queue of different experiments. However this method cannot be well adapted to the volatility of computing resource requirements. To solve this problem, an elastic computing resource management system under cloud computing environment has been designed. This system performs unified management of virtual computing nodes on the basis of job queue in HTCondor based on dual resource thresholds as well as the quota service. A two-stage pool is designed to improve the efficiency of resource pool expansion. This paper will present several use cases of the elastic resource management system in IHEPCloud. The practical run shows virtual computing resource dynamically expanded or shrunk while computing requirements change. Additionally, the CPU utilization ratio of computing resource was significantly increased when compared with traditional resource management. The system also has good performance when there are multiple condor schedulers and multiple job queues.

A kinematic wave model in Lagrangian coordinates incorporating capacity drop: Application to homogeneous road stretches and discontinuities

NASA Astrophysics Data System (ADS)

Yuan, Kai; Knoop, Victor L.; Hoogendoorn, Serge P.

2017-01-01

On freeways, congestion always leads to capacity drop. This means the queue discharge rate is lower than the pre-queue capacity. Our recent research findings indicate that the queue discharge rate increases with the speed in congestion, that is the capacity drop is strongly correlated with the congestion state. Incorporating this varying capacity drop into a kinematic wave model is essential for assessing consequences of control strategies. However, to the best of authors' knowledge, no such a model exists. This paper fills the research gap by presenting a Lagrangian kinematic wave model. "Lagrangian" denotes that the new model is solved in Lagrangian coordinates. The new model can give capacity drops accompanying both of stop-and-go waves (on homogeneous freeway section) and standing queues (at nodes) in a network. The new model can be applied in a network operation. In this Lagrangian kinematic wave model, the queue discharge rate (or the capacity drop) is a function of vehicular speed in traffic jams. Four case studies on links as well as at lane-drop and on-ramp nodes show that the Lagrangian kinematic wave model can give capacity drops well, consistent with empirical observations.

PRESEE: An MDL/MML Algorithm to Time-Series Stream Segmenting

PubMed Central

Jiang, Yexi; Tang, Mingjie; Yuan, Changan; Tang, Changjie

2013-01-01

Time-series stream is one of the most common data types in data mining field. It is prevalent in fields such as stock market, ecology, and medical care. Segmentation is a key step to accelerate the processing speed of time-series stream mining. Previous algorithms for segmenting mainly focused on the issue of ameliorating precision instead of paying much attention to the efficiency. Moreover, the performance of these algorithms depends heavily on parameters, which are hard for the users to set. In this paper, we propose PRESEE (parameter-free, real-time, and scalable time-series stream segmenting algorithm), which greatly improves the efficiency of time-series stream segmenting. PRESEE is based on both MDL (minimum description length) and MML (minimum message length) methods, which could segment the data automatically. To evaluate the performance of PRESEE, we conduct several experiments on time-series streams of different types and compare it with the state-of-art algorithm. The empirical results show that PRESEE is very efficient for real-time stream datasets by improving segmenting speed nearly ten times. The novelty of this algorithm is further demonstrated by the application of PRESEE in segmenting real-time stream datasets from ChinaFLUX sensor networks data stream. PMID:23956693

PRESEE: an MDL/MML algorithm to time-series stream segmenting.

PubMed

Xu, Kaikuo; Jiang, Yexi; Tang, Mingjie; Yuan, Changan; Tang, Changjie

2013-01-01

Time-series stream is one of the most common data types in data mining field. It is prevalent in fields such as stock market, ecology, and medical care. Segmentation is a key step to accelerate the processing speed of time-series stream mining. Previous algorithms for segmenting mainly focused on the issue of ameliorating precision instead of paying much attention to the efficiency. Moreover, the performance of these algorithms depends heavily on parameters, which are hard for the users to set. In this paper, we propose PRESEE (parameter-free, real-time, and scalable time-series stream segmenting algorithm), which greatly improves the efficiency of time-series stream segmenting. PRESEE is based on both MDL (minimum description length) and MML (minimum message length) methods, which could segment the data automatically. To evaluate the performance of PRESEE, we conduct several experiments on time-series streams of different types and compare it with the state-of-art algorithm. The empirical results show that PRESEE is very efficient for real-time stream datasets by improving segmenting speed nearly ten times. The novelty of this algorithm is further demonstrated by the application of PRESEE in segmenting real-time stream datasets from ChinaFLUX sensor networks data stream.

CPAP Tips

MedlinePlus

... starting stop Loading... Watch Queue Queue __count__/__total__ YouTube Premium Loading... Get YouTube without the ads. Working... No thanks 3-months ... use your CPAP device. Category Education License Standard YouTube License Show more Show less Comments are disabled ...

Interferometer with Continuously Varying Path Length Measured in Wavelengths to the Reference Mirror

NASA Technical Reports Server (NTRS)

Ohara, Tetsuo (Inventor)

2016-01-01

An interferometer in which the path length of the reference beam, measured in wavelengths, is continuously changing in sinusoidal fashion and the interference signal created by combining the measurement beam and the reference beam is processed in real time to obtain the physical distance along the measurement beam between the measured surface and a spatial reference frame such as the beam splitter. The processing involves analyzing the Fourier series of the intensity signal at one or more optical detectors in real time and using the time-domain multi-frequency harmonic signals to extract the phase information independently at each pixel position of one or more optical detectors and converting the phase information to distance information.

A Queue Simulation Tool for a High Performance Scientific Computing Center

NASA Technical Reports Server (NTRS)

Spear, Carrie; McGalliard, James

2007-01-01

The NASA Center for Computational Sciences (NCCS) at the Goddard Space Flight Center provides high performance highly parallel processors, mass storage, and supporting infrastructure to a community of computational Earth and space scientists. Long running (days) and highly parallel (hundreds of CPUs) jobs are common in the workload. NCCS management structures batch queues and allocates resources to optimize system use and prioritize workloads. NCCS technical staff use a locally developed discrete event simulation tool to model the impacts of evolving workloads, potential system upgrades, alternative queue structures and resource allocation policies.

Optimal and Approximately Optimal Control Policies for Queues in Heavy Traffic,

DTIC Science & Technology

1987-03-01

optimal and ’nearly optimal’ control problems for the open queueing networks in heavy traffic of the type dealt with in the fundamental papers of Reiman ...then the covariance is precisely that obtained by Reiman [1] (with a different notation used there). It is evident from (4.4) and the cited...wU’ ’U, d A K . " -50- References [1] M.I. Reiman , "Open queueing networks in heavy traffic", Math. of Operations Research, 9, 1984, p. 441-458. [2] J

A Critique of the DoD Materiel Distribution Study,

DTIC Science & Technology

1979-03-01

are generated on order cycle times by their components: communication times, depot order processing times, depot capacity delay times, and transit...exceeded, the order was placed in one of three priority queues. The order processing time was determined by priority group by depot. A 20-point probability...time was defined to be the sum of communication, depot order processing , depot capacity delay, and transit times. As has been argued, the first three of

A Hybrid Neuromechanical Ambulatory Assist System

DTIC Science & Technology

2016-08-01

provide real- time closed-loop control using brace mounted sensors to deliver the stimulation needed to stand up and walk while coordinating exoskeletal...target PC during real- time implementation. The muscle stimulator unit delivered the NES to target paralyzed muscles to drive limb motion. The activity...manual adjustment of thresholds used in the GED and stimulation pattern lengths (Figure 26b). The time for a right or left step could be decreased

End-to-end QoS bounds for RTP-based service subnetworks

NASA Astrophysics Data System (ADS)

Pitts, Jonathan M.; Schormans, John A.

1999-11-01

With the increasing focus on traffic prioritization to support voice-data integration in corporate intranets, practical methods are needed to dimension and manage cost efficient service partitions. This is particularly important for the provisioning of real time, delay sensitive services such as telephony and voice/video conferencing applications. Typically these can be provided over RTP/UDP/IP or ATM DBR/SBR bearers but, irrespective of the specific networking technology, the switches or routers need to implement some form of virtual buffer management with queue scheduling mechanisms to provide partitioning. The key requirement is for operators of such networks to be able to dimension the partitions and virtual buffer sizes for efficient resource utilization, instead of simply over-dimensioning. This paper draws on recent work at Queen Mary, University of London, supported by the UK Engineering and Physical Sciences Research Council, to investigate approximate analytical methods for assessing end to end delay variation bounds in cell based and packet based networks.

Development of traffic control and queue management procedures for oversaturated arterials

DOT National Transportation Integrated Search

1997-01-01

The formulation and solution of a new algorithm for queue management and coordination of traffic signals along oversaturated arterials are presented. Existing traffic-control and signal-coordination algorithms deal only with undersaturated steady-sta...

Report on dynamic speed harmonization and queue warning algorithm design.

DOT National Transportation Integrated Search

2014-02-01

This report provides a detailed description of the algorithms that will be used to generate harmonized recommended speeds and queue warning information in the proposed Intelligent Network Flow Optimization (INFLO) prototype. This document describes t...

Job Scheduling Under the Portable Batch System

NASA Technical Reports Server (NTRS)

Henderson, Robert L.; Woodrow, Thomas S. (Technical Monitor)

1995-01-01

The typical batch queuing system schedules jobs for execution by a set of queue controls. The controls determine from which queues jobs may be selected. Within the queue, jobs are ordered first-in, first-run. This limits the set of scheduling policies available to a site. The Portable Batch System removes this limitation by providing an external scheduling module. This separate program has full knowledge of the available queued jobs, running jobs, and system resource usage. Sites are able to implement any policy expressible in one of several procedural language. Policies may range from "bet fit" to "fair share" to purely political. Scheduling decisions can be made over the full set of jobs regardless of queue or order. The scheduling policy can be changed to fit a wide variety of computing environments and scheduling goals. This is demonstrated by the use of PBS on an IBM SP-2 system at NASA Ames.

Parallel discrete-event simulation of FCFS stochastic queueing networks

NASA Technical Reports Server (NTRS)

Nicol, David M.

1988-01-01

Physical systems are inherently parallel. Intuition suggests that simulations of these systems may be amenable to parallel execution. The parallel execution of a discrete-event simulation requires careful synchronization of processes in order to ensure the execution's correctness; this synchronization can degrade performance. Largely negative results were recently reported in a study which used a well-known synchronization method on queueing network simulations. Discussed here is a synchronization method (appointments), which has proven itself to be effective on simulations of FCFS queueing networks. The key concept behind appointments is the provision of lookahead. Lookahead is a prediction on a processor's future behavior, based on an analysis of the processor's simulation state. It is shown how lookahead can be computed for FCFS queueing network simulations, give performance data that demonstrates the method's effectiveness under moderate to heavy loads, and discuss performance tradeoffs between the quality of lookahead, and the cost of computing lookahead.

Bell's twin rockets non-inertial length enigma resolved by real geometry

NASA Astrophysics Data System (ADS)

Coleman, Brian

A priori uniformity and monotonicity of the 'non-inertial length' expansion of a uniformly co-accelerating medium, uniquely yield an unfamiliar 'hemicoid' real-values metric surface ϒ in R3 . ϒ (τ, l) hosts congruent helicoidally distributed fixed-l 'hemix world-lines' tracing medium increments' clock times τ and crossed by fixed- τ medium helices of parameterized length λ sharing comoving 'non-inertial frames'. Radar intervals and expansion factor ∂λ / ∂l = √ (1 +v2 /c2) conform to requirements established in Coleman, Results in Physics,6, 2016-Minkowski spacetime does not apply to a homogeneously accelerating medium. Co-directional radar paths on ϒ mapped from home frame chart diagonals crossing hyperbolic world-lines, surf 'horizon' increment hemices, whereas counter-directional radar paths tend to 'overlap' horizon medium helices. They also traverse each medium expansion helix at respectively identical angles and geodesic curvatures, independently of differing rocket emission times. Surface ϒ 's real metric is: ds2 = dτ2 + dλ2 +[ 2 tanhτ . (tanhτ - 1 / coshτ) / √ (1 +tanh2 τ) ] dτ . dλ .

Triage for coronary artery bypass graft surgery in Canada: Do patients agree on who should come first?

PubMed Central

Shufelt, Katy; Chong, Alice; Alter, David A

2007-01-01

Background The extent to which clinical and non-clinical factors impact on the waiting-list prioritization preferences of patients in the queue is unknown. Using a series of hypothetical scenarios, the objective of this study was to examine the extent to which clinical and non-clinical factors impacted on how patients would prioritize others relative to themselves in the coronary artery bypass surgical queue. Methods Ninety-one consecutive eligible patients awaiting coronary artery bypass grafting surgery at Sunnybrook Health Sciences Centre (median waiting-time duration prior to survey of 8 weeks) were given a self-administered survey consisting of nine scenarios in which clinical and non-clinical characteristic profiles of hypothetical patients (also awaiting coronary artery bypass surgery) were varied. For each scenario, patients were asked where in the queue such hypothetical patients should be placed relative to themselves. Results The eligible response rate was 65% (59/91). Most respondents put themselves marginally ahead of a hypothetical patient with identical clinical and non-clinical characteristics as themselves. There was a strong tendency for respondents to place patients of higher clinical acuity ahead of themselves in the queue (P < 0.0001). Social independence among young individuals was a positively valued attribute (P < 0.0001), but neither age per se nor financial status, directly impacted on patients waiting-list priority preferences. Conclusion While patient perceptions generally reaffirmed a bypass surgical triage process based on principals of equity and clinical acuity, the valuation of social independence may justify further debate with regard to the inclusion of non-clinical factors in waiting-list prioritization management systems in Canada, as elsewhere. PMID:17651503

Optimization of ramp area aircraft push back time windows in the presence of uncertainty

NASA Astrophysics Data System (ADS)

Coupe, William Jeremy

It is well known that airport surface traffic congestion at major airports is responsible for increased taxi-out times, fuel burn and excess emissions and there is potential to mitigate these negative consequences through optimizing airport surface traffic operations. Due to a highly congested voice communication channel between pilots and air traffic controllers and a data communication channel that is used only for limited functions, one of the most viable near-term strategies for improvement of the surface traffic is issuing a push back advisory to each departing aircraft. This dissertation focuses on the optimization of a push back time window for each departing aircraft. The optimization takes into account both spatial and temporal uncertainties of ramp area aircraft trajectories. The uncertainties are described by a stochastic kinematic model of aircraft trajectories, which is used to infer distributions of combinations of push back times that lead to conflict among trajectories from different gates. The model is validated and the distributions are included in the push back time window optimization. Under the assumption of a fixed taxiway spot schedule, the computed push back time windows can be integrated with a higher level taxiway scheduler to optimize the flow of traffic from the gate to the departure runway queue. To enable real-time decision making the computational time of the push back time window optimization is critical and is analyzed throughout.

A Hybrid Secure Scheme for Wireless Sensor Networks against Timing Attacks Using Continuous-Time Markov Chain and Queueing Model.

PubMed

Meng, Tianhui; Li, Xiaofan; Zhang, Sha; Zhao, Yubin

2016-09-28

Wireless sensor networks (WSNs) have recently gained popularity for a wide spectrum of applications. Monitoring tasks can be performed in various environments. This may be beneficial in many scenarios, but it certainly exhibits new challenges in terms of security due to increased data transmission over the wireless channel with potentially unknown threats. Among possible security issues are timing attacks, which are not prevented by traditional cryptographic security. Moreover, the limited energy and memory resources prohibit the use of complex security mechanisms in such systems. Therefore, balancing between security and the associated energy consumption becomes a crucial challenge. This paper proposes a secure scheme for WSNs while maintaining the requirement of the security-performance tradeoff. In order to proceed to a quantitative treatment of this problem, a hybrid continuous-time Markov chain (CTMC) and queueing model are put forward, and the tradeoff analysis of the security and performance attributes is carried out. By extending and transforming this model, the mean time to security attributes failure is evaluated. Through tradeoff analysis, we show that our scheme can enhance the security of WSNs, and the optimal rekeying rate of the performance and security tradeoff can be obtained.

A Hybrid Secure Scheme for Wireless Sensor Networks against Timing Attacks Using Continuous-Time Markov Chain and Queueing Model

PubMed Central

Meng, Tianhui; Li, Xiaofan; Zhang, Sha; Zhao, Yubin

2016-01-01

Wireless sensor networks (WSNs) have recently gained popularity for a wide spectrum of applications. Monitoring tasks can be performed in various environments. This may be beneficial in many scenarios, but it certainly exhibits new challenges in terms of security due to increased data transmission over the wireless channel with potentially unknown threats. Among possible security issues are timing attacks, which are not prevented by traditional cryptographic security. Moreover, the limited energy and memory resources prohibit the use of complex security mechanisms in such systems. Therefore, balancing between security and the associated energy consumption becomes a crucial challenge. This paper proposes a secure scheme for WSNs while maintaining the requirement of the security-performance tradeoff. In order to proceed to a quantitative treatment of this problem, a hybrid continuous-time Markov chain (CTMC) and queueing model are put forward, and the tradeoff analysis of the security and performance attributes is carried out. By extending and transforming this model, the mean time to security attributes failure is evaluated. Through tradeoff analysis, we show that our scheme can enhance the security of WSNs, and the optimal rekeying rate of the performance and security tradeoff can be obtained. PMID:27690042

Stochastic queueing-theory approach to human dynamics

NASA Astrophysics Data System (ADS)

Walraevens, Joris; Demoor, Thomas; Maertens, Tom; Bruneel, Herwig

2012-02-01

Recently, numerous studies have shown that human dynamics cannot be described accurately by exponential laws. For instance, Barabási [Nature (London)NATUAS0028-083610.1038/nature03459 435, 207 (2005)] demonstrates that waiting times of tasks to be performed by a human are more suitably modeled by power laws. He presumes that these power laws are caused by a priority selection mechanism among the tasks. Priority models are well-developed in queueing theory (e.g., for telecommunication applications), and this paper demonstrates the (quasi-)immediate applicability of such a stochastic priority model to human dynamics. By calculating generating functions and by studying them in their dominant singularity, we prove that nonexponential tails result naturally. Contrary to popular belief, however, these are not necessarily triggered by the priority selection mechanism.

On the Deployment and Noise Filtering of Vehicular Radar Application for Detection Enhancement in Roads and Tunnels.

PubMed

Kim, Young-Duk; Son, Guk-Jin; Song, Chan-Ho; Kim, Hee-Kang

2018-03-11

Recently, radar technology has attracted attention for the realization of an intelligent transportation system (ITS) to monitor, track, and manage vehicle traffic on the roads as well as adaptive cruise control (ACC) and automatic emergency braking (AEB) for driving assistance of vehicles. However, when radar is installed on roads or in tunnels, the detection performance is significantly dependent on the deployment conditions and environment around the radar. In particular, in the case of tunnels, the detection accuracy for a moving vehicle drops sharply owing to the diffuse reflection of radio frequency (RF) signals. In this paper, we propose an optimal deployment condition based on height and tilt angle as well as a noise-filtering scheme for RF signals so that the performance of vehicle detection can be robust against external conditions on roads and in tunnels. To this end, first, we gather and analyze the misrecognition patterns of the radar by tracking a number of randomly selected vehicles on real roads. In order to overcome the limitations, we implement a novel road watch module (RWM) that is easily integrated into a conventional radar system such as Delphi ESR. The proposed system is able to perform real-time distributed data processing of the target vehicles by providing independent queues for each object of information that is incoming from the radar RF. Based on experiments with real roads and tunnels, the proposed scheme shows better performance than the conventional method with respect to the detection accuracy and delay time. The implemented system also provides a user-friendly interface to monitor and manage all traffic on roads and in tunnels. This will accelerate the popularization of future ITS services.

On the Deployment and Noise Filtering of Vehicular Radar Application for Detection Enhancement in Roads and Tunnels

PubMed Central

Kim, Young-Duk; Son, Guk-Jin; Song, Chan-Ho

2018-01-01

Recently, radar technology has attracted attention for the realization of an intelligent transportation system (ITS) to monitor, track, and manage vehicle traffic on the roads as well as adaptive cruise control (ACC) and automatic emergency braking (AEB) for driving assistance of vehicles. However, when radar is installed on roads or in tunnels, the detection performance is significantly dependent on the deployment conditions and environment around the radar. In particular, in the case of tunnels, the detection accuracy for a moving vehicle drops sharply owing to the diffuse reflection of radio frequency (RF) signals. In this paper, we propose an optimal deployment condition based on height and tilt angle as well as a noise-filtering scheme for RF signals so that the performance of vehicle detection can be robust against external conditions on roads and in tunnels. To this end, first, we gather and analyze the misrecognition patterns of the radar by tracking a number of randomly selected vehicles on real roads. In order to overcome the limitations, we implement a novel road watch module (RWM) that is easily integrated into a conventional radar system such as Delphi ESR. The proposed system is able to perform real-time distributed data processing of the target vehicles by providing independent queues for each object of information that is incoming from the radar RF. Based on experiments with real roads and tunnels, the proposed scheme shows better performance than the conventional method with respect to the detection accuracy and delay time. The implemented system also provides a user-friendly interface to monitor and manage all traffic on roads and in tunnels. This will accelerate the popularization of future ITS services. PMID:29534483

GREEN + IDMaps: A practical soulution for ensuring fairness in a biased internet

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kapadia, A. C.; Thulasidasan, S.; Feng, W. C.

2002-01-01

GREEN is a proactive queue-management (PQM) algorithm that removes TCP's bias against connections with longer round-trip times, while maintaining high link utilization and low packet-loss. GREEN applies knowledge of the steady-state behavior of TCP connections to proactively drop packets, thus preventing congestion from ever occurring. As a result, GREEN ensures much higher fairness between flows than other active queue management schemes like Flow Random Early Drop (FRED) and Stochastic Fair Blue (SFB), which suffer in topologies where a large number of flows have widely varying round-trip times. GREEN'S performance relies on its ability to gauge a flow's round-trip time (RTT).more » In previous work, we presented results for an ideal GREEN router which has accurate RTT information for a flow. In this paper, we present a practical solution based on IDMaps, an Internet distance-estimation service, and compare its performance to an ideal GREEN router. We show that a solution based on IDMaps is practical and maintains high fairness and link utilization, and low packet-loss rates.« less

Modeling Human Supervisory Control in Heterogeneous Unmanned Vehicle Systems

DTIC Science & Technology

2009-02-01

events through a queue, nominally due to another queue having reached its capacity limitation (Balsamo, Persone, & Onvural, 2001; Onvural, 1990; Perros ...Communication and Coordination, Athens, Greece. Perros , H. G. (1984). Queuing Networks with Blocking: A Bibliography. ACM Sigmetrics, Performance Evaluation

Cumulative incidence for wait-list death in relation to length of queue for coronary-artery bypass grafting: a cohort study.

PubMed

Sobolev, Boris G; Kuramoto, Lisa; Levy, Adrian R; Hayden, Robert

2006-08-24

In deciding where to undergo coronary-artery bypass grafting, the length of surgical wait lists is often the only information available to cardiologists and their patients. Our objective was to compare the cumulative incidence for death on the wait list according to the length of wait lists at the time of registration for the operation. The study cohort included 8966 patients who registered to undergo isolated coronary-artery bypass grafting (82.4% men; 71.9% semi-urgent; 22.4% non-urgent). The patients were categorized according to wait-list clearance time at registration: either "1 month or less" or "more than 1 month". Cumulative incidence for wait-list death was compared between the groups, and the significance of difference was tested by means of regression models. Urgent patients never registered on a wait list with a clearance time of more than 1 month. Semi-urgent patients registered on shorter wait lists more often than non-urgent patients (79.1% vs. 44.7%). In semi-urgent and non-urgent patients, the observed proportion of wait-list deaths by 52 weeks was lower in category "1 month or less" than in category "more than 1 month" (0.8% [49 deaths] vs. 1.6% [39 deaths], P < 0.005). After adjustment, the odds of death before surgery were 64% higher in patients on longer lists, odds ratio [OR] = 1.64 (95% confidence interval [CI] 1.02-2.63). The observed death rate was higher in category "more than 1 month" than in category "1 month or less", 0.79 (95%CI 0.54-1.04) vs. 0.58 (95% CI 0.42-0.74) per 1000 patient-weeks, the adjusted OR = 1.60 (95%CI 1.01-2.53). Longer wait times (log-rank test = 266.4, P < 0.001) and higher death rates contributed to a higher cumulative incidence for death on the wait list with a clearance time of more than 1 month. Long wait lists for coronary-artery bypass grafting are associated with increased probability that a patient dies before surgery. Physicians who advise patients where to undergo cardiac revascularization should consider the risk of pre-surgical death that is associated with the length of a surgical wait list.

Link State Relationships Under Incident Conditions: Using a CTM-Based Linear Programming Dynamic Traffic Assignment Model

DOT National Transportation Integrated Search

2010-03-01

Urban transportation networks, consisting of numerous links and nodes, experience traffic incidents such as accidents and road maintenance work. A typical consequence of incidents is congestion which results in long queues and causes high travel time...

Chimpanzee females queue but males compete for social status

PubMed Central

Foerster, Steffen; Franz, Mathias; Murray, Carson M.; Gilby, Ian C.; Feldblum, Joseph T.; Walker, Kara K.; Pusey, Anne E.

2016-01-01

Dominance hierarchies are widespread in animal social groups and often have measureable effects on individual health and reproductive success. Dominance ranks are not static individual attributes, however, but instead are influenced by two independent processes: 1) changes in hierarchy membership and 2) successful challenges of higher-ranking individuals. Understanding which of these processes dominates the dynamics of rank trajectories can provide insights into fitness benefits of within-sex competition. This question has yet to be examined systematically in a wide range of taxa due to the scarcity of long-term data and a lack of appropriate methodologies for distinguishing between alternative causes of rank changes over time. Here, we expand on recent work and develop a new likelihood-based Elo rating method that facilitates the systematic assessment of rank dynamics in animal social groups, even when interaction data are sparse. We apply this method to characterize long-term rank trajectories in wild eastern chimpanzees (Pan troglodytes schweinfurthii) and find remarkable sex differences in rank dynamics, indicating that females queue for social status while males actively challenge each other to rise in rank. Further, our results suggest that natal females obtain a head start in the rank queue if they avoid dispersal, with potential fitness benefits. PMID:27739527

The cloud paradigm applied to e-Health

PubMed Central

2013-01-01

Background Cloud computing is a new paradigm that is changing how enterprises, institutions and people understand, perceive and use current software systems. With this paradigm, the organizations have no need to maintain their own servers, nor host their own software. Instead, everything is moved to the cloud and provided on demand, saving energy, physical space and technical staff. Cloud-based system architectures provide many advantages in terms of scalability, maintainability and massive data processing. Methods We present the design of an e-health cloud system, modelled by an M/M/m queue with QoS capabilities, i.e. maximum waiting time of requests. Results Detailed results for the model formed by a Jackson network of two M/M/m queues from the queueing theory perspective are presented. These results show a significant performance improvement when the number of servers increases. Conclusions Platform scalability becomes a critical issue since we aim to provide the system with high Quality of Service (QoS). In this paper we define an architecture capable of adapting itself to different diseases and growing numbers of patients. This platform could be applied to the medical field to greatly enhance the results of those therapies that have an important psychological component, such as addictions and chronic diseases. PMID:23496912

IDCDACS: IDC's Distributed Application Control System

NASA Astrophysics Data System (ADS)

Ertl, Martin; Boresch, Alexander; Kianička, Ján; Sudakov, Alexander; Tomuta, Elena

2015-04-01

The Preparatory Commission for the CTBTO is an international organization based in Vienna, Austria. Its mission is to establish a global verification regime to monitor compliance with the Comprehensive Nuclear-Test-Ban Treaty (CTBT), which bans all nuclear explosions. For this purpose time series data from a global network of seismic, hydro-acoustic and infrasound (SHI) sensors are transmitted to the International Data Centre (IDC) in Vienna in near-real-time, where it is processed to locate events that may be nuclear explosions. We newly designed the distributed application control system that glues together the various components of the automatic waveform data processing system at the IDC (IDCDACS). Our highly-scalable solution preserves the existing architecture of the IDC processing system that proved successful over many years of operational use, but replaces proprietary components with open-source solutions and custom developed software. Existing code was refactored and extended to obtain a reusable software framework that is flexibly adaptable to different types of processing workflows. Automatic data processing is organized in series of self-contained processing steps, each series being referred to as a processing pipeline. Pipelines process data by time intervals, i.e. the time-series data received from monitoring stations is organized in segments based on the time when the data was recorded. So-called data monitor applications queue the data for processing in each pipeline based on specific conditions, e.g. data availability, elapsed time or completion states of preceding processing pipelines. IDCDACS consists of a configurable number of distributed monitoring and controlling processes, a message broker and a relational database. All processes communicate through message queues hosted on the message broker. Persistent state information is stored in the database. A configurable processing controller instantiates and monitors all data processing applications. Due to decoupling by message queues the system is highly versatile and failure tolerant. The implementation utilizes the RabbitMQ open-source messaging platform that is based upon the Advanced Message Queuing Protocol (AMQP), an on-the-wire protocol (like HTML) and open industry standard. IDCDACS uses high availability capabilities provided by RabbitMQ and is equipped with failure recovery features to survive network and server outages. It is implemented in C and Python and is operated in a Linux environment at the IDC. Although IDCDACS was specifically designed for the existing IDC processing system its architecture is generic and reusable for different automatic processing workflows, e.g. similar to those described in (Olivieri et al. 2012, Kværna et al. 2012). Major advantages are its independence of the specific data processing applications used and the possibility to reconfigure IDCDACS for different types of processing, data and trigger logic. A possible future development would be to use the IDCDACS framework for different scientific domains, e.g. for processing of Earth observation satellite data extending the one-dimensional time-series intervals to spatio-temporal data cubes. REFERENCES Olivieri M., J. Clinton (2012) An almost fair comparison between Earthworm and SeisComp3, Seismological Research Letters, 83(4), 720-727. Kværna, T., S. J. Gibbons, D. B. Harris, D. A. Dodge (2012) Adapting pipeline architectures to track developing aftershock sequences and recurrent explosions, Proceedings of the 2012 Monitoring Research Review: Ground-Based Nuclear Explosion Monitoring Technologies, 776-785.

Priority queues with bursty arrivals of incoming tasks

NASA Astrophysics Data System (ADS)

Masuda, N.; Kim, J. S.; Kahng, B.

2009-03-01

Recently increased accessibility of large-scale digital records enables one to monitor human activities such as the interevent time distributions between two consecutive visits to a web portal by a single user, two consecutive emails sent out by a user, two consecutive library loans made by a single individual, etc. Interestingly, those distributions exhibit a universal behavior, D(τ)˜τ-δ , where τ is the interevent time, and δ≃1 or 3/2 . The universal behaviors have been modeled via the waiting-time distribution of a task in the queue operating based on priority; the waiting time follows a power-law distribution Pw(τ)˜τ-α with either α=1 or 3/2 depending on the detail of queuing dynamics. In these models, the number of incoming tasks in a unit time interval has been assumed to follow a Poisson-type distribution. For an email system, however, the number of emails delivered to a mail box in a unit time we measured follows a power-law distribution with general exponent γ . For this case, we obtain analytically the exponent α , which is not necessarily 1 or 3/2 and takes nonuniversal values depending on γ . We develop the generating function formalism to obtain the exponent α , which is distinct from the continuous time approximation used in the previous studies.

Technical report on prototype intelligent network flow optimization (INFLO) dynamic speed harmonization and queue warning.

DOT National Transportation Integrated Search

2015-06-01

This Technical Report on Prototype Intelligent Network Flow Optimization (INFLO) Dynamic Speed Harmonization and Queue Warning is the final report for the project. It describes the prototyping, acceptance testing and small-scale demonstration of the ...

Research into Queueing Network Theory.

DTIC Science & Technology

1977-09-01

and Zeigler, B. (1975) "Equilibrium properties of arbitrarily interconnected queueing netowrks ," Tech. Report 75-4, Computer and Communication...Associate. The project was extremely fortunate to secure the services of Dr. Wendel. Dr. Wendel was a project member for one month in the summer of

Identifying effects and applications of fixed and variable speed limits.

DOT National Transportation Integrated Search

2016-08-01

In Indiana, distracted driving and unexpected queues have led to an increase in the amount of back-of-queue crashes, particularly on approach to : work zones. This report presents new strategies for the assessment of both transportation safety and tr...

Use of extremely short Förster resonance energy transfer probes in real-time polymerase chain reaction

PubMed Central

Kutyavin, Igor V.

2013-01-01

Described in the article is a new approach for the sequence-specific detection of nucleic acids in real-time polymerase chain reaction (PCR) using fluorescently labeled oligonucleotide probes. The method is based on the production of PCR amplicons, which fold into dumbbell-like secondary structures carrying a specially designed ‘probe-luring’ sequence at their 5′ ends. Hybridization of this sequence to a complementary ‘anchoring’ tail introduced at the 3′ end of a fluorescent probe enables the probe to bind to its target during PCR, and the subsequent probe cleavage results in the florescence signal. As it has been shown in the study, this amplicon-endorsed and guided formation of the probe-target duplex allows the use of extremely short oligonucleotide probes, up to tetranucleotides in length. In particular, the short length of the fluorescent probes makes possible the development of a ‘universal’ probe inventory that is relatively small in size but represents all possible sequence variations. The unparalleled cost-effectiveness of the inventory approach is discussed. Despite the short length of the probes, this new method, named Angler real-time PCR, remains highly sequence specific, and the results of the study indicate that it can be effectively used for quantitative PCR and the detection of polymorphic variations. PMID:24013564

Dynamically-allocated multi-queue buffers for VLSI communication switches

NASA Technical Reports Server (NTRS)

Tamir, Yuval; Frazier, Gregory L.

1992-01-01

Several buffer structures are discussed and compared in terms of implementation complexity, interswitch handshaking requirements, and their ability to deal with variations in traffic patterns and message lengths. A new design of buffers is presented that provide non-FIFO message handling and efficient storage allocation for variable size packets using linked lists managed by a simple on-chip controller. The new buffer design is evaluated by comparing it to several alternative designs in the context of a multistage interconnection network. The present modeling and simulations show that the new buffer outperforms alternative buffers and can thus be used to improve the performance of a wide variety of systems currently using less efficient buffers.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weeks, R.; Briggs, M.; Gyenes, L.

A study carried out to assist the design of an infrastructure for refuelling battery electric cars is described. A one-week survey by questionnaire of all filling stations in the area yielded estimates of petrol sales at individual stations together with number of customers served and quantities purchased per customer. A computer simulation of traffic flow attempted to predict weekly petrol sales in nine sectors of the town. A one-day count of traffic and petrol buyers at a single filling station was related to the traffic flows in the whole town to give a typical daily pattern of petrol buyers. Finallymore » a simulation procedure was developed to investigate the effects of demand on queue length at battery exchange stations.« less

Clinical usefulness of augmented reality using infrared camera based real-time feedback on gait function in cerebral palsy: a case study.

PubMed

Lee, Byoung-Hee

2016-04-01

[Purpose] This study investigated the effects of real-time feedback using infrared camera recognition technology-based augmented reality in gait training for children with cerebral palsy. [Subjects] Two subjects with cerebral palsy were recruited. [Methods] In this study, augmented reality based real-time feedback training was conducted for the subjects in two 30-minute sessions per week for four weeks. Spatiotemporal gait parameters were used to measure the effect of augmented reality-based real-time feedback training. [Results] Velocity, cadence, bilateral step and stride length, and functional ambulation improved after the intervention in both cases. [Conclusion] Although additional follow-up studies of the augmented reality based real-time feedback training are required, the results of this study demonstrate that it improved the gait ability of two children with cerebral palsy. These findings suggest a variety of applications of conservative therapeutic methods which require future clinical trials.

Impacts assessment of dynamic speed harmonization with queue warning : task 3, impacts assessment report.

DOT National Transportation Integrated Search

2015-06-01

This report assesses the impacts of a prototype of Dynamic Speed Harmonization (SPD-HARM) with Queue Warning (Q-WARN), which are two component applications of the Intelligent Network Flow Optimization (INFLO) bundle. The assessment is based on an ext...

Power Allocation Based on Data Classification in Wireless Sensor Networks

PubMed Central

Wang, Houlian; Zhou, Gongbo

2017-01-01

Limited node energy in wireless sensor networks is a crucial factor which affects the monitoring of equipment operation and working conditions in coal mines. In addition, due to heterogeneous nodes and different data acquisition rates, the number of arriving packets in a queue network can differ, which may lead to some queue lengths reaching the maximum value earlier compared with others. In order to tackle these two problems, an optimal power allocation strategy based on classified data is proposed in this paper. Arriving data is classified into dissimilar classes depending on the number of arriving packets. The problem is formulated as a Lyapunov drift optimization with the objective of minimizing the weight sum of average power consumption and average data class. As a result, a suboptimal distributed algorithm without any knowledge of system statistics is presented. The simulations, conducted in the perfect channel state information (CSI) case and the imperfect CSI case, reveal that the utility can be pushed arbitrarily close to optimal by increasing the parameter V, but with a corresponding growth in the average delay, and that other tunable parameters W and the classification method in the interior of utility function can trade power optimality for increased average data class. The above results show that data in a high class has priorities to be processed than data in a low class, and energy consumption can be minimized in this resource allocation strategy. PMID:28498346

Molecular analysis of Leptospira spp. isolated from humans by restriction fragment length polymorphism, real-time PCR and pulsed-field gel electrophoresis.

PubMed

Turk, Nenad; Milas, Zoran; Mojcec, Vesna; Ruzic-Sabljic, Eva; Staresina, Vilim; Stritof, Zrinka; Habus, Josipa; Postic, Daniele

2009-11-01

A total of 17 Leptospira clinical strains isolated from humans in Croatia were serologically and genetically analysed. For serovar identification, the microscopic agglutination test (MAT) and pulsed-field gel electrophoresis (PFGE) were used. To identify isolates on genomic species level, PCR-based restriction fragment length polymorphism (RFLP) and real-time PCR were performed. MAT revealed the following serogroup affinities: Grippotyphosa (seven isolates), Icterohaemorrhagiae (eight isolates) and Javanica (two isolates). RFLP of PCR products from a 331-bp-long fragment of rrs (16S rRNA gene) digested with endonucleases MnlI and DdeI and real-time PCR revealed three Leptospira genomic species. Grippotyphosa isolates belonged to Leptospira kirschneri, Icterohaemorrhagiae isolates to Leptospira interrogans and Javanica isolates to Leptospira borgpetersenii. Genomic DNA from 17 leptospiral isolates was digested with NotI and SgrAI restriction enzymes and analysed by PFGE. Results showed that seven isolates have the same binding pattern to serovar Grippotyphosa, eight isolates to serovar Icterohaemorrhagiae and two isolates to serovar Poi. Results demonstrate the diversity of leptospires circulating in Croatia. We point out the usefulness of a combination of PFGE, RFLP and real-time PCR as appropriate molecular methods in molecular analysis of leptospires.

Determining the optimal window length for pattern recognition-based myoelectric control: balancing the competing effects of classification error and controller delay.

PubMed

Smith, Lauren H; Hargrove, Levi J; Lock, Blair A; Kuiken, Todd A

2011-04-01

Pattern recognition-based control of myoelectric prostheses has shown great promise in research environments, but has not been optimized for use in a clinical setting. To explore the relationship between classification error, controller delay, and real-time controllability, 13 able-bodied subjects were trained to operate a virtual upper-limb prosthesis using pattern recognition of electromyogram (EMG) signals. Classification error and controller delay were varied by training different classifiers with a variety of analysis window lengths ranging from 50 to 550 ms and either two or four EMG input channels. Offline analysis showed that classification error decreased with longer window lengths (p < 0.01 ). Real-time controllability was evaluated with the target achievement control (TAC) test, which prompted users to maneuver the virtual prosthesis into various target postures. The results indicated that user performance improved with lower classification error (p < 0.01 ) and was reduced with longer controller delay (p < 0.01 ), as determined by the window length. Therefore, both of these effects should be considered when choosing a window length; it may be beneficial to increase the window length if this results in a reduced classification error, despite the corresponding increase in controller delay. For the system employed in this study, the optimal window length was found to be between 150 and 250 ms, which is within acceptable controller delays for conventional multistate amplitude controllers.

Multi-Resource Fair Queueing for Packet Processing

DTIC Science & Technology

2012-06-19

Huawei , Intel, MarkLogic, Microsoft, NetApp, Oracle, Quanta, Splunk, VMware and by DARPA (contract #FA8650-11-C-7136). Multi-Resource Fair Queueing for...Google PhD Fellowship, gifts from Amazon Web Services, Google, SAP, Blue Goji, Cisco, Cloud- era, Ericsson, General Electric, Hewlett Packard, Huawei

32 CFR 299.5 - Procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... PROGRAM NATIONAL SECURITY AGENCY/CENTRAL SECURITY SERVICE (NSA/CSS) FREEDOM OF INFORMATION ACT PROGRAM.../CSS by other government agencies shall be placed in the processing queue according to the date the... placed in the queue according to the date of the requester's letter. (d) The FOIA office shall maintain...

Specification and Verification of Communication Protocols in AFFIRM Using State Transition Models.

DTIC Science & Technology

1981-03-01

NewQueueOfftcket; theorem Pendnglnvariant, Remove(Pending(s)) = NewQueueOfPacket; Since the implementation is in keeping with the specification, its salp ...another communication line. The communication lines are unreliable; messages traveling in either direction can be lost, reordered, corrupted, or

Moving toward queue operations at the Large Binocular Telescope Observatory

NASA Astrophysics Data System (ADS)

Edwards, Michelle L.; Summers, Doug; Astier, Joseph; Suarez Sola, Igor; Veillet, Christian; Power, Jennifer; Cardwell, Andrew; Walsh, Shane

2016-07-01

The Large Binocular Telescope Observatory (LBTO), a joint scientific venture between the Instituto Nazionale di Astrofisica (INAF), LBT Beteiligungsgesellschaft (LBTB), University of Arizona, Ohio State University (OSU), and the Research Corporation, is one of the newest additions to the world's collection of large optical/infrared ground-based telescopes. With its unique, twin 8.4m mirror design providing a 22.8 meter interferometric baseline and the collecting area of an 11.8m telescope, LBT has a window of opportunity to exploit its singular status as the "first" of the next generation of Extremely Large Telescopes (ELTs). Prompted by urgency to maximize scientific output during this favorable interval, LBTO recently re-evaluated its operations model and developed a new strategy that augments classical observing with queue. Aided by trained observatory staff, queue mode will allow for flexible, multi-instrument observing responsive to site conditions. Our plan is to implement a staged rollout that will provide many of the benefits of queue observing sooner rather than later - with more bells and whistles coming in future stages. In this paper, we outline LBTO's new scientific model, focusing specifically on our "lean" resourcing and development, reuse and adaptation of existing software, challenges presented from our one-of-a-kind binocular operations, and lessons learned. We also outline further stages of development and our ultimate goals for queue.

Designing e-Education Supports in e-Health Based Systems

ERIC Educational Resources Information Center

Nicholas, Ikhu-Omoregbe

2008-01-01

The inadequate availability of medical information has often made health care services in many developing countries cumbersome with enormous paper work, waste of life, time and resources, long queues, and ineffective treatment procedures. The use of mobile technology devices such as Personal Digital Assistants, Cell phone, Tablet PCs, etc. for…

Real-time label-free quantitative fluorescence microscopy-based detection of ATP using a tunable fluorescent nano-aptasensor platform

NASA Astrophysics Data System (ADS)

Shrivastava, Sajal; Sohn, Il-Yung; Son, Young-Min; Lee, Won-Il; Lee, Nae-Eung

2015-11-01

Although real-time label-free fluorescent aptasensors based on nanomaterials are increasingly recognized as a useful strategy for the detection of target biomolecules with high fidelity, the lack of an imaging-based quantitative measurement platform limits their implementation with biological samples. Here we introduce an ensemble strategy for a real-time label-free fluorescent graphene (Gr) aptasensor platform. This platform employs aptamer length-dependent tunability, thus enabling the reagentless quantitative detection of biomolecules through computational processing coupled with real-time fluorescence imaging data. We demonstrate that this strategy effectively delivers dose-dependent quantitative readouts of adenosine triphosphate (ATP) concentration on chemical vapor deposited (CVD) Gr and reduced graphene oxide (rGO) surfaces, thereby providing cytotoxicity assessment. Compared with conventional fluorescence spectrometry methods, our highly efficient, universally applicable, and rational approach will facilitate broader implementation of imaging-based biosensing platforms for the quantitative evaluation of a range of target molecules.Although real-time label-free fluorescent aptasensors based on nanomaterials are increasingly recognized as a useful strategy for the detection of target biomolecules with high fidelity, the lack of an imaging-based quantitative measurement platform limits their implementation with biological samples. Here we introduce an ensemble strategy for a real-time label-free fluorescent graphene (Gr) aptasensor platform. This platform employs aptamer length-dependent tunability, thus enabling the reagentless quantitative detection of biomolecules through computational processing coupled with real-time fluorescence imaging data. We demonstrate that this strategy effectively delivers dose-dependent quantitative readouts of adenosine triphosphate (ATP) concentration on chemical vapor deposited (CVD) Gr and reduced graphene oxide (rGO) surfaces, thereby providing cytotoxicity assessment. Compared with conventional fluorescence spectrometry methods, our highly efficient, universally applicable, and rational approach will facilitate broader implementation of imaging-based biosensing platforms for the quantitative evaluation of a range of target molecules. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr05839b

Real-time particle size analysis using focused beam reflectance measurement as a process analytical technology tool for a continuous granulation-drying-milling process.

PubMed

Kumar, Vijay; Taylor, Michael K; Mehrotra, Amit; Stagner, William C

2013-06-01

Focused beam reflectance measurement (FBRM) was used as a process analytical technology tool to perform inline real-time particle size analysis of a proprietary granulation manufactured using a continuous twin-screw granulation-drying-milling process. A significant relationship between D20, D50, and D80 length-weighted chord length and sieve particle size was observed with a p value of <0.0001 and R(2) of 0.886. A central composite response surface statistical design was used to evaluate the effect of granulator screw speed and Comil® impeller speed on the length-weighted chord length distribution (CLD) and particle size distribution (PSD) determined by FBRM and nested sieve analysis, respectively. The effect of granulator speed and mill speed on bulk density, tapped density, Compressibility Index, and Flowability Index were also investigated. An inline FBRM probe placed below the Comil-generated chord lengths and CLD data at designated times. The collection of the milled samples for sieve analysis and PSD evaluation were coordinated with the timing of the FBRM determinations. Both FBRM and sieve analysis resulted in similar bimodal distributions for all ten manufactured batches studied. Within the experimental space studied, the granulator screw speed (650-850 rpm) and Comil® impeller speed (1,000-2,000 rpm) did not have a significant effect on CLD, PSD, bulk density, tapped density, Compressibility Index, and Flowability Index (p value > 0.05).

Impacts Assessment of Dynamic Speed Harmonization with Queue Warning : Task 3, Impacts Assessment Report. [supporting datasets

DOT National Transportation Integrated Search

2015-05-31

The datasets in the .pdf and .zip attached to this record are in support of Intelligent Transportation Systems Joint Program Office (ITS JPO) report FHWA-JPO-15-222, "Impacts Assessment of Dynamic Speed Harmonization with Queue Warning : Task 3, Impa...

Dynamic fiber Bragg grating strain sensor interrogation with real-time measurement

NASA Astrophysics Data System (ADS)

Park, Jinwoo; Kwon, Yong Seok; Ko, Myeong Ock; Jeon, Min Yong

2017-11-01

We demonstrate a 1550 nm band resonance Fourier-domain mode-locked (FDML) fiber laser with fiber Bragg grating (FBG) array. Using the FDML fiber laser, we successfully demonstrate real-time monitoring of dynamic FBG strain sensor interrogation for structural health monitoring. The resonance FDML fiber laser consists of six multiplexed FBGs, which are arranged in series with delay fiber lengths. It is operated by driving the fiber Fabry-Perot tunable filter (FFP-TF) with a sinusoidal waveform at a frequency corresponding to the round-trip time of the laser cavity. Each FBG forms a laser cavity independently in the FDML fiber laser because the light travels different length for each FBG. The very closely positioned two FBGs in a pair are operated simultaneously with a frequency in the FDML fiber laser. The spatial positions of the sensing pair can be distinguished from the variation of the applied frequency to the FFP-TF. One of the FBGs in the pair is used as a reference signal and the other one is fixed on the piezoelectric transducer stack to apply the dynamic strain. We successfully achieve real-time measurement of the abrupt change of the frequencies applied to the FBG without any signal processing delay. The real-time monitoring system is displayed simultaneously on the monitor for the variation of the two peaks, the modulation interval of the two peaks, and their fast Fourier transform spectrum. The frequency resolution of the dynamic variation could reach up to 0.5 Hz for 2 s integration time. It depends on the integration time to measure the dynamic variation. We believe that the real-time monitoring system will have a potential application for structural health monitoring.

DIVA V2.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

CHEN, JOANNA; SIMIRENKO, LISA; TAPASWI, MANJIRI

The DIVA software interfaces a process in which researchers design their DNA with a web-based graphical user interface, submit their designs to a central queue, and a few weeks later receive their sequence-verified clonal constructs. Each researcher independently designs the DNA to be constructed with a web-based BioCAD tool, and presses a button to submit their designs to a central queue. Researchers have web-based access to their DNA design queues, and can track the progress of their submitted designs as they progress from "evaluation", to "waiting for reagents", to "in progress", to "complete". Researchers access their completed constructs through themore » central DNA repository. Along the way, all DNA construction success/failure rates are captured in a central database. Once a design has been submitted to the queue, a small number of dedicated staff evaluate the design for feasibility and provide feedback to the responsible researcher if the design is either unreasonable (e.g., encompasses a combinatorial library of a billion constructs) or small design changes could significantly facilitate the downstream implementation process. The dedicated staff then use DNA assembly design automation software to optimize the DNA construction process for the design, leveraging existing parts from the DNA repository where possible and ordering synthetic DNA where necessary. SynTrack software manages the physical locations and availability of the various requisite reagents and process inputs (e.g., DNA templates). Once all requisite process inputs are available, the design progresses from "waiting for reagents" to "in progress" in the design queue. Human-readable and machine-parseable DNA construction protocols output by the DNA assembly design automation software are then executed by the dedicated staff exploiting lab automation devices wherever possible. Since the all employed DNA construction methods are sequence-agnostic, standardized (utilize the same enzymatic master mixes and reaction conditions), completely independent DNA construction tasks can be aggregated into the same multi-well plates and pursued in parallel. The resulting sets of cloned constructs can then be screened by high-throughput next-gen sequencing platforms for sequence correctness. A combination of long read-length (e.g., PacBio) and paired-end read platforms (e.g., Illumina) would be exploited depending the particular task at hand (e.g., PacBio might be sufficient to screen a set of pooled constructs with significant gene divergence). Post sequence verification, designs for which at least one correct clone was identified will progress to a "complete" status, while designs for which no correct clones wereidentified will progress to a "failure" status. Depending on the failure mode (e.g., no transformants), and how many prior attempts/variations of assembly protocol have been already made for a given design, subsequent attempts may be made or the design can progress to a "permanent failure" state. All success and failure rate information will be captured during the process, including at which stage a given clonal construction procedure failed (e.g., no PCR product) and what the exact failure was (e.g. assembly piece 2 missing). This success/failure rate data can be leveraged to refine the DNA assembly design process.« less

DVD-COOP: Innovative Conjunction Prediction Using Voronoi-filter based on the Dynamic Voronoi Diagram of 3D Spheres

NASA Astrophysics Data System (ADS)

Cha, J.; Ryu, J.; Lee, M.; Song, C.; Cho, Y.; Schumacher, P.; Mah, M.; Kim, D.

Conjunction prediction is one of the critical operations in space situational awareness (SSA). For geospace objects, common algorithms for conjunction prediction are usually based on all-pairwise check, spatial hash, or kd-tree. Computational load is usually reduced through some filters. However, there exists a good chance of missing potential collisions between space objects. We present a novel algorithm which both guarantees no missing conjunction and is efficient to answer to a variety of spatial queries including pairwise conjunction prediction. The algorithm takes only O(k log N) time for N objects in the worst case to answer conjunctions where k is a constant which is linear to prediction time length. The proposed algorithm, named DVD-COOP (Dynamic Voronoi Diagram-based Conjunctive Orbital Object Predictor), is based on the dynamic Voronoi diagram of moving spherical balls in 3D space. The algorithm has a preprocessing which consists of two steps: The construction of an initial Voronoi diagram (taking O(N) time on average) and the construction of a priority queue for the events of topology changes in the Voronoi diagram (taking O(N log N) time in the worst case). The scalability of the proposed algorithm is also discussed. We hope that the proposed Voronoi-approach will change the computational paradigm in spatial reasoning among space objects.

Performance Modeling of the ADA Rendezvous

DTIC Science & Technology

1991-10-01

queueing network of figure 2, SERVERTASK can complete only one rendezvous at a time. Thus, the rate that the rendezvous requests are processed at the... Network 1, SERVERTASK competes with the traffic tasks of Server Processor. Each time SERVERTASK gains access to the processor, SERVERTASK completes...Client Processor Server Processor Software Server Nek Netork2 Figure 10. A conceptualization of the algorithm. The SERVERTASK software server of Network 2

A continuous analog of run length distributions reflecting accumulated fractionation events.

PubMed

Yu, Zhe; Sankoff, David

2016-11-11

We propose a new, continuous model of the fractionation process (duplicate gene deletion after polyploidization) on the real line. The aim is to infer how much DNA is deleted at a time, based on segment lengths for alternating deleted (invisible) and undeleted (visible) regions. After deriving a number of analytical results for "one-sided" fractionation, we undertake a series of simulations that help us identify the distribution of segment lengths as a gamma with shape and rate parameters evolving over time. This leads to an inference procedure based on observed length distributions for visible and invisible segments. We suggest extensions of this mathematical and simulation work to biologically realistic discrete models, including two-sided fractionation.

A Model of the Base Civil Engineering Work Request/Work Order Processing System.

DTIC Science & Technology

1979-09-01

changes to the work order processing system. This research identifies the variables that significantly affect the accomplishment time and proposes a... order processing system and its behavior with respect to work order processing time. A conceptual model was developed to describe the work request...work order processing system as a stochastic queueing system in which the processing times and the various distributions are treated as random variables

System complexity as a measure of safe capacity for the emergency department.

PubMed

France, Daniel J; Levin, Scott

2006-11-01

System complexity is introduced as a new measure of system state for the emergency department (ED). In its original form, the measure quantifies the uncertainty of demands on system resources. For application in the ED, the measure is being modified to quantify both workload and uncertainty to produce a single integrated measure of system state. Complexity is quantified using an information-theoretic or entropic approach developed in manufacturing and operations research. In its original form, complexity is calculated on the basis of four system parameters: 1) the number of resources (clinicians and processing entities such as radiology and laboratory systems), 2) the number of possible work states for each resource, 3) the probability that a resource is in a particular work state, and 4) the probability of queue changes (i.e., where a queue is defined by the number of patients or patient orders being managed by a resource) during a specified time period. An example is presented to demonstrate how complexity is calculated and interpreted for a simple system composed of three resources (i.e., emergency physicians) managing varying patient loads. The example shows that variation in physician work states and patient queues produces different scores of complexity for each physician. It also illustrates how complexity and workload differ. System complexity is a viable and technically feasible measurement for monitoring and managing surge capacity in the ED.

ATLAS user analysis on private cloud resources at GoeGrid

NASA Astrophysics Data System (ADS)

Glaser, F.; Nadal Serrano, J.; Grabowski, J.; Quadt, A.

2015-12-01

User analysis job demands can exceed available computing resources, especially before major conferences. ATLAS physics results can potentially be slowed down due to the lack of resources. For these reasons, cloud research and development activities are now included in the skeleton of the ATLAS computing model, which has been extended by using resources from commercial and private cloud providers to satisfy the demands. However, most of these activities are focused on Monte-Carlo production jobs, extending the resources at Tier-2. To evaluate the suitability of the cloud-computing model for user analysis jobs, we developed a framework to launch an ATLAS user analysis cluster in a cloud infrastructure on demand and evaluated two solutions. The first solution is entirely integrated in the Grid infrastructure by using the same mechanism, which is already in use at Tier-2: A designated Panda-Queue is monitored and additional worker nodes are launched in a cloud environment and assigned to a corresponding HTCondor queue according to the demand. Thereby, the use of cloud resources is completely transparent to the user. However, using this approach, submitted user analysis jobs can still suffer from a certain delay introduced by waiting time in the queue and the deployed infrastructure lacks customizability. Therefore, our second solution offers the possibility to easily deploy a totally private, customizable analysis cluster on private cloud resources belonging to the university.

Proposal for optimal placement platform of bikes using queueing networks.

PubMed

Mizuno, Shinya; Iwamoto, Shogo; Seki, Mutsumi; Yamaki, Naokazu

2016-01-01

In recent social experiments, rental motorbikes and rental bicycles have been arranged at nodes, and environments where users can ride these bikes have been improved. When people borrow bikes, they return them to nearby nodes. Some experiments have been conducted using the models of Hamachari of Yokohama, the Niigata Rental Cycle, and Bicing. However, from these experiments, the effectiveness of distributing bikes was unclear, and many models were discontinued midway. Thus, we need to consider whether these models are effectively designed to represent the distribution system. Therefore, we construct a model to arrange the nodes for distributing bikes using a queueing network. To adopt realistic values for our model, we use the Google Maps application program interface. Thus, we can easily obtain values of distance and transit time between nodes in various places in the world. Moreover, we apply the distribution of a population to a gravity model and we compute the effective transition probability for this queueing network. If the arrangement of the nodes and number of bikes at each node is known, we can precisely design the system. We illustrate our system using convenience stores as nodes and optimize the node configuration. As a result, we can optimize simultaneously the number of nodes, node places, and number of bikes for each node, and we can construct a base for a rental cycle business to use our system.

Diameter sensors for tree-length harvesting systems

Treesearch

T.P. McDonald; Robert B. Rummer; T.E. Grift

2003-01-01

Most cut-to-length (CTL) harvesters provide sensors for measuring diameter of trees as they are cut and processed. Among other uses, this capability provides a data collection tool for marketing of logs in real time. Logs can be sorted and stacked based on up-to-date market information, then transportation systems optimized to route wood to proper destinations at...

Stochastic recruitment leads to symmetry breaking in foraging populations

NASA Astrophysics Data System (ADS)

Biancalani, Tommaso; Dyson, Louise; McKane, Alan

2014-03-01

When an ant colony is faced with two identical equidistant food sources, the foraging ants are found to concentrate more on one source than the other. Analogous symmetry-breaking behaviours have been reported in various population systems, (such as queueing or stock market trading) suggesting the existence of a simple universal mechanism. Past studies have neglected the effect of demographic noise and required rather complicated models to qualitatively reproduce this behaviour. I will show how including the effects of demographic noise leads to a radically different conclusion. The symmetry-breaking arises solely due to the process of recruitment and ceases to occur for large population sizes. The latter fact provides a testable prediction for a real system.

Job Queues, Certification Status, and the Education Labor Market

ERIC Educational Resources Information Center

Evans, Lorraine

2011-01-01

This research explores the interaction between training programs and certification status in one education labor market to examine the micro-level interactions that shape the recruitment process. Using job queue theory, it is found that the information available to novice teachers operates to stratify and shape their worksite choices in addition…

Generic Fortran Containers (GFC)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liakh, Dmitry

2016-09-01

The Fortran language does not provide a standard library that implements generic containers, like linked lists, trees, dictionaries, etc. The GFC software provides an implementation of generic Fortran containers natively written in Fortran 2003/2008 language. The following containers are either already implemented or planned: Stack (done), Linked list (done), Tree (done), Dictionary (done), Queue (planned), Priority queue (planned).

Announcements | High-Performance Computing | NREL

Science.gov Websites

12th from 12 - 3 PM. Continue reading Data Transfer Queue March 08, 2018 A new queue "data , scratch) and MSS. Continue reading Purge-Alert January 11, 2018 We now have a notification method that . Continue reading Please Move Inactive Files Off the /projects File System January 11, 2018 The /projects

Active Methodologies in a Queueing Systems Course for Telecommunication Engineering Studies

ERIC Educational Resources Information Center

Garcia, J.; Hernandez, A.

2010-01-01

This paper presents the results of a one-year experiment in incorporating active methodologies in a Queueing Systems course as part of the Telecommunication Engineering degree at the University of Zaragoza, Spain, during the period of adaptation to the European Higher Education Area. A problem-based learning methodology has been introduced, and…

Performance modeling of automated manufacturing systems

NASA Astrophysics Data System (ADS)

Viswanadham, N.; Narahari, Y.

A unified and systematic treatment is presented of modeling methodologies and analysis techniques for performance evaluation of automated manufacturing systems. The book is the first treatment of the mathematical modeling of manufacturing systems. Automated manufacturing systems are surveyed and three principal analytical modeling paradigms are discussed: Markov chains, queues and queueing networks, and Petri nets.

Military Standard Common APSE (Ada Programming Support Environment) Interface Set (CAIS).

DTIC Science & Technology

1985-01-01

QUEUEASE. LAST-KEY (QUEENAME) . LASTREI.TIONI(QUEUE-NAME). FILE-NODE. PORN . ATTRIBUTTES. ACCESSCONTROL. LEVEL); CLOSE (QUEUE BASE); CLOSE(FILE NODE...PROPOSED XIIT-STD-C.4 31 J NNUAfY logs procedure zTERT (ITERATOR: out NODE ITERATON; MAMIE: NAME STRING.KIND: NODE KID : KEY : RELATIONSHIP KEY PA1TTE1 :R

78 FR 20164 - Self-Regulatory Organizations; NYSE Arca, Inc.; Response to Comments Submitted After the Issuance...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-03

... data, views, and arguments concerning the Approval Order, including whether Amendment No. 1 to the... commenter discussed the existing unloading queues for metals, including copper, at LME warehouses.\\18\\ The commenter asserted that queues to unload copper from LME warehouses appear to be lengthening because owners...

Entrainment of a Bacterial Synthetic Gene Oscillator through Proteolytic Queueing.

PubMed

Butzin, Nicholas C; Hochendoner, Philip; Ogle, Curtis T; Mather, William H

2017-03-17

Internal chemical oscillators (chemical clocks) direct the behavior of numerous biological systems, and maintenance of a given period and phase among many such oscillators may be important for their proper function. However, both environmental variability and fundamental molecular noise can cause biochemical oscillators to lose coherence. One solution to maintaining coherence is entrainment, where an external signal provides a cue that resets the phase of the oscillators. In this work, we study the entrainment of gene networks by a queueing interaction established by competition between proteins for a common proteolytic pathway. Principles of queueing entrainment are investigated for an established synthetic oscillator in Escherichia coli. We first explore this theoretically using a standard chemical reaction network model and a map-based model, both of which suggest that queueing entrainment can be achieved through pulsatile production of an additional protein competing for a common degradation pathway with the oscillator proteins. We then use a combination of microfluidics and fluorescence microscopy to verify that pulse trains modulating the production rate of a fluorescent protein targeted to the same protease (ClpXP) as the synthetic oscillator can entrain the oscillator.

VSHC -- VAXstation VWS hardcopy

NASA Astrophysics Data System (ADS)

Huckle, H. E.; Clayton, C. A.

VSHC works when a detached process is run at boot time which runs a .EXE file that creates a permanent mailbox and redefines UISPRINT_DESTINATION to that mailbox. The program then goes into an infinite loop which includes a read to that mailbox. When a hardcopy is initiated, sixel graphics commands are sent to UISPRINT_DESTINATION and thus go to the mailbox. The program then reads those graphics commands from the mailbox and interprets them into equivalent Canon commands, using a `State Machine' technique to determine how far it's got, i.e. is it a start of a plot, end of plot, middle of plot, next plot etc. It spools the file of Canon graphics commands thus created (in VSHC_SCRATCH:), to a queue pointed at by the logical name VSHC_QUEUE. UISPRINT_DESTINATION can be mysteriously reset to its default value of CSA0: and so every few minutes an AST timeout occurs to reset UISPRINT_DESTINATION.

Emergency response to an anthrax attack

PubMed Central

Wein, Lawrence M.; Craft, David L.; Kaplan, Edward H.

2003-01-01

We developed a mathematical model to compare various emergency responses in the event of an airborne anthrax attack. The system consists of an atmospheric dispersion model, an age-dependent dose–response model, a disease progression model, and a set of spatially distributed two-stage queueing systems consisting of antibiotic distribution and hospital care. Our results underscore the need for the extremely aggressive and timely use of oral antibiotics by all asymptomatics in the exposure region, distributed either preattack or by nonprofessionals postattack, and the creation of surge capacity for supportive hospital care via expanded training of nonemergency care workers at the local level and the use of federal and military resources and nationwide medical volunteers. The use of prioritization (based on disease stage and/or age) at both queues, and the development and deployment of modestly rapid and sensitive biosensors, while helpful, produce only second-order improvements. PMID:12651951

Tables of Queue Size and Waiting Time Distributions for M/M/c, M/D/c, and D/M/c Queueing Systems.

DTIC Science & Technology

1980-03-01

1091.0se-G. 4.11,61148 III- U .3 3"’s .2% .... 1.. 00-. :=1 2"’ all, I w 󈧕". 1 6.11:,""o 209.4 s. of 0 ::::v Iso ".. ...... t. 1.0 it oj .1. .11211111-41...72204011-06 A.0. " : " : 3:: 2;.1000561-02 .1.26 It G. 10 02 .40.. 1 a 2, ISO taOj *::% 9,110- 1 20 1. 11-.; 0-04161. 1. 1, 11" I-SP It-01 0.1.1002 21...0. 󈧄 .4 . . ISO 91-0) In* 66: : 0 14.12 b"ll: 00- 0.1.91ij 1 0 1 1: ?1 1, -"i’ll-02 10 1 1112 .2.0 1 0.99-8 1299-05 0. 9VOSIS 1 2. -. 2 .10 . - 0

Telomere length in non-neoplastic gastric mucosa and its relationship to H. pylori infection, degree of gastritis, and NSAID use.

PubMed

Tahara, Tomomitsu; Shibata, Tomoyuki; Kawamura, Tomohiko; Ishizuka, Takamitsu; Okubo, Masaaki; Nagasaka, Mitsuo; Nakagawa, Yoshihito; Arisawa, Tomiyasu; Ohmiya, Naoki; Hirata, Ichiro

2016-02-01

Telomere shortening occurs with human aging in many organs and tissues and is accelerated by rapid cell turnover and oxidative injury. We measured average telomere length using quantitative real-time PCR in non-neoplastic gastric mucosa and assessed its relationship to H. pylori-related gastritis, DNA methylation, ulcer disease, and nonsteroidal anti-inflammatory drug (NSAID) usage. Gastric biopsies were obtained from 151 cancer-free subjects including 49 chronic NSAID users and 102 nonusers. Relative telomere length in genomic DNA was measured by real-time PCR. H. pylori infection status, histological severity of gastritis, and serum pepsinogens (PGs) were also investigated. E-cadherin (CDH1) methylation status was determined by methylation-specific PCR (MSP). Average relative telomere length of H. pylori-infected subjects was significantly shortened when compared to H. pylori-negative subjects (p = 0.002) and was closely associated with all histological parameter of gastritis (all p values <0.01) and CDH1 methylation (p = 0.0002). In H. pylori-negative subjects, NSAID users presented significantly shorter telomere length than nonusers (p = 0.028). Shorter telomere length was observed in duodenal and gastric ulcer patients compared with non-ulcer subjects among NSAID users. Telomere shortening is closely associated with severity of H. pylori-induced gastritis and CDH1 methylation status. Also, telomere shortening is accelerated by NSAID usage especially in H. pylori-negative subjects.

Modeling Precheck Parallel Screening Process in the Face of Strategic Applicants with Incomplete Information and Screening Errors.

PubMed

Song, Cen; Zhuang, Jun

2018-01-01

In security check systems, tighter screening processes increase the security level, but also cause more congestion, which could cause longer wait times. Having to deal with more congestion in lines could also cause issues for the screeners. The Transportation Security Administration (TSA) Precheck Program was introduced to create fast lanes in airports with the goal of expediting passengers who the TSA does not deem to be threats. In this lane, the TSA allows passengers to enjoy fewer restrictions in order to speed up the screening time. Motivated by the TSA Precheck Program, we study parallel queueing imperfect screening systems, where the potential normal and adversary participants/applicants decide whether to apply to the Precheck Program or not. The approved participants would be assigned to a faster screening channel based on a screening policy determined by an approver, who balances the concerns of safety of the passengers and congestion of the lines. There exist three types of optimal normal applicant's application strategy, which depend on whether the marginal payoff is negative or positive, or whether the marginal benefit equals the marginal cost. An adversary applicant would not apply when the screening policy is sufficiently large or the number of utilized benefits is sufficiently small. The basic model is extended by considering (1) applicants' parameters to follow different distributions and (2) applicants to have risk levels, where the approver determines the threshold value needed to qualify for Precheck. This article integrates game theory and queueing theory to study the optimal screening policy and provides some insights to imperfect parallel queueing screening systems. © 2017 Society for Risk Analysis.

Digital communications study

NASA Technical Reports Server (NTRS)

Boorstyn, R. R.

1973-01-01

Research is reported dealing with problems of digital data transmission and computer communications networks. The results of four individual studies are presented which include: (1) signal processing with finite state machines, (2) signal parameter estimation from discrete-time observations, (3) digital filtering for radar signal processing applications, and (4) multiple server queues where all servers are not identical.

78 FR 52522 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-23

... Applicants: PJM Interconnection, L.L.C. Description: Queue No. W2-014; First Revised Service Agreement No... the Commission's eLibrary system by clicking on the links or querying the docket number. Any person... 214 of the Commission's Regulations (18 CFR 385.211 and 385.214) on or before 5:00 p.m. Eastern time...

Design and development of cell queuing, processing, and scheduling modules for the iPOINT input-buffered ATM testbed

NASA Astrophysics Data System (ADS)

Duan, Haoran

1997-12-01

This dissertation presents the concepts, principles, performance, and implementation of input queuing and cell-scheduling modules for the Illinois Pulsar-based Optical INTerconnect (iPOINT) input-buffered Asynchronous Transfer Mode (ATM) testbed. Input queuing (IQ) ATM switches are well suited to meet the requirements of current and future ultra-broadband ATM networks. The IQ structure imposes minimum memory bandwidth requirements for cell buffering, tolerates bursty traffic, and utilizes memory efficiently for multicast traffic. The lack of efficient cell queuing and scheduling solutions has been a major barrier to build high-performance, scalable IQ-based ATM switches. This dissertation proposes a new Three-Dimensional Queue (3DQ) and a novel Matrix Unit Cell Scheduler (MUCS) to remove this barrier. 3DQ uses a linked-list architecture based on Synchronous Random Access Memory (SRAM) to combine the individual advantages of per-virtual-circuit (per-VC) queuing, priority queuing, and N-destination queuing. It avoids Head of Line (HOL) blocking and provides per-VC Quality of Service (QoS) enforcement mechanisms. Computer simulation results verify the QoS capabilities of 3DQ. For multicast traffic, 3DQ provides efficient usage of cell buffering memory by storing multicast cells only once. Further, the multicast mechanism of 3DQ prevents a congested destination port from blocking other less- loaded ports. The 3DQ principle has been prototyped in the Illinois Input Queue (iiQueue) module. Using Field Programmable Gate Array (FPGA) devices, SRAM modules, and integrated on a Printed Circuit Board (PCB), iiQueue can process incoming traffic at 800 Mb/s. Using faster circuit technology, the same design is expected to operate at the OC-48 rate (2.5 Gb/s). MUCS resolves the output contention by evaluating the weight index of each candidate and selecting the heaviest. It achieves near-optimal scheduling and has a very short response time. The algorithm originates from a heuristic strategy that leads to 'socially optimal' solutions, yielding a maximum number of contention-free cells being scheduled. A novel mixed digital-analog circuit has been designed to implement the MUCS core functionality. The MUCS circuit maps the cell scheduling computation to the capacitor charging and discharging procedures that are conducted fully in parallel. The design has a uniform circuit structure, low interconnect counts, and low chip I/O counts. Using 2 μm CMOS technology, the design operates on a 100 MHz clock and finds a near-optimal solution within a linear processing time. The circuit has been verified at the transistor level by HSPICE simulation. During this research, a five-port IQ-based optoelectronic iPOINT ATM switch has been developed and demonstrated. It has been fully functional with an aggregate throughput of 800 Mb/s. The second-generation IQ-based switch is currently under development. Equipped with iiQueue modules and MUCS module, the new switch system will deliver a multi-gigabit aggregate throughput, eliminate HOL blocking, provide per-VC QoS, and achieve near-100% link bandwidth utilization. Complete documentation of input modules and trunk module for the existing testbed, and complete documentation of 3DQ, iiQueue, and MUCS for the second-generation testbed are given in this dissertation.

Route planning in a four-dimensional environment

NASA Technical Reports Server (NTRS)

Slack, M. G.; Miller, D. P.

1987-01-01

Robots must be able to function in the real world. The real world involves processes and agents that move independently of the actions of the robot, sometimes in an unpredictable manner. A real-time integrated route planning and spatial representation system for planning routes through dynamic domains is presented. The system will find the safest most efficient route through space-time as described by a set of user defined evaluation functions. Because the route planning algorthims is highly parallel and can run on an SIMD machine in O(p) time (p is the length of a path), the system will find real-time paths through unpredictable domains when used in an incremental mode. Spatial representation, an SIMD algorithm for route planning in a dynamic domain, and results from an implementation on a traditional computer architecture are discussed.

A Concept and Implementation of Optimized Operations of Airport Surface Traffic

NASA Technical Reports Server (NTRS)

Jung, Yoon C.; Hoang, Ty; Montoya, Justin; Gupta, Gautam; Malik, Waqar; Tobias, Leonard

2010-01-01

This paper presents a new concept of optimized surface operations at busy airports to improve the efficiency of taxi operations, as well as reduce environmental impacts. The suggested system architecture consists of the integration of two decoupled optimization algorithms. The Spot Release Planner provides sequence and timing advisories to tower controllers for releasing departure aircraft into the movement area to reduce taxi delay while achieving maximum throughput. The Runway Scheduler provides take-off sequence and arrival runway crossing sequence to the controllers to maximize the runway usage. The description of a prototype implementation of this integrated decision support tool for the airport control tower controllers is also provided. The prototype decision support tool was evaluated through a human-in-the-loop experiment, where both the Spot Release Planner and Runway Scheduler provided advisories to the Ground and Local Controllers. Initial results indicate the average number of stops made by each departure aircraft in the departure runway queue was reduced by more than half when the controllers were using the advisories, which resulted in reduced taxi times in the departure queue.

Mass prophylaxis dispensing concerns: traffic and public access to PODs.

PubMed

Baccam, Prasith; Willauer, David; Krometis, Justin; Ma, Yongchang; Sen, Atri; Boechler, Michael

2011-06-01

The ability to quickly dispense postexposure prophylaxis (PEP) using multiple points of dispensing (PODs) following a bioterrorism event could potentially save a large proportion of those who were exposed, while failure in PEP dispensing could have dire public health consequences. A Monte Carlo simulation was developed to explore the traffic flow and parking around PODs under different arrival rates and how these factors might affect the utilization rate of POD workers. The results demonstrate that the public can reasonably access the PODs under ideal conditions assuming a stationary (uniform) arrival rate. For the 5 nonstationary arrival rates tested, however, the available parking spaces quickly become filled, causing long traffic queues and resulting in total processing times that range from 1 hour to over 6 hours. Basic planning considerations should include the use of physical barriers, signage, and traffic control officers to help direct vehicular and pedestrian access to the PODs. Furthermore, the parking and traffic surrounding PODs creates long queues of people waiting to access the PODs. Thus, POD staff are fully used approximately 90% of the time, which can lead to worker fatigue and burn out.

Safety evaluation of joint and conventional lane merge configurations for freeway work zones.

PubMed

Ishak, Sherif; Qi, Yan; Rayaprolu, Pradeep

2012-01-01

Inefficient operation of traffic in work zone areas not only leads to an increase in travel time delays, queue length, and fuel consumption but also increases the number of forced merges and roadway accidents. This study evaluated the safety performance of work zones with a conventional lane merge (CLM) configuration in Louisiana. Analysis of variance (ANOVA) was used to compare the crash rates for accidents involving fatalities, injuries, and property damage only (PDO) in each of the following 4 areas: (1) advance warning area, (2) transition area, (3) work area, and (4) termination area. The analysis showed that the advance warning area had higher fatality, injury, and PDO crash rates when compared to the transition area, work area, and termination area. This finding confirmed the need to make improvements in the advance warning area where merging maneuvers take place. Therefore, a new lane merge configuration, called joint lane merge (JLM), was proposed and its safety performance was examined and compared to the conventional lane merge configuration using a microscopic simulation model (VISSIM), which was calibrated with real-world data from an existing work zone on I-55 and used to simulate a total of 25 different scenarios with different levels of demand and traffic composition. Safety performance was evaluated using 2 surrogate measures: uncomfortable decelerations and speed variance. Statistical analysis was conducted to determine whether the differences in safety performance between both configurations were significant. The safety analysis indicated that JLM outperformed CLM in most cases with low to moderate flow rates and that the percentage of trucks did not have a significant impact on the safety performance of either configuration. Though the safety analysis did not clearly indicate which lane merge configuration is safer for the overall work zone area, it was able to identify the possibly associated safety changes within the work zone area under different traffic conditions. Copyright © 2012 Taylor & Francis Group, LLC

Clinical usefulness of augmented reality using infrared camera based real-time feedback on gait function in cerebral palsy: a case study

PubMed Central

Lee, Byoung-Hee

2016-01-01

[Purpose] This study investigated the effects of real-time feedback using infrared camera recognition technology-based augmented reality in gait training for children with cerebral palsy. [Subjects] Two subjects with cerebral palsy were recruited. [Methods] In this study, augmented reality based real-time feedback training was conducted for the subjects in two 30-minute sessions per week for four weeks. Spatiotemporal gait parameters were used to measure the effect of augmented reality-based real-time feedback training. [Results] Velocity, cadence, bilateral step and stride length, and functional ambulation improved after the intervention in both cases. [Conclusion] Although additional follow-up studies of the augmented reality based real-time feedback training are required, the results of this study demonstrate that it improved the gait ability of two children with cerebral palsy. These findings suggest a variety of applications of conservative therapeutic methods which require future clinical trials. PMID:27190489

Improved work zone design guidelines and enhanced model of travel delays in work zones : Phase I, portability and scalability of interarrival and service time probability distribution functions for different locations in Ohio and the establishment of impr

DOT National Transportation Integrated Search

2006-01-01

The project focuses on two major issues - the improvement of current work zone design practices and an analysis of : vehicle interarrival time (IAT) and speed distributions for the development of a digital computer simulation model for : queues and t...

Finding NEMO (novel electromaterial muscle oscillator): a polypyrrole powered robotic fish with real-time wireless speed and directional control

NASA Astrophysics Data System (ADS)

McGovern, Scott; Alici, Gursel; Truong, Van-Tan; Spinks, Geoffrey

2009-09-01

This paper presents the development of an autonomously powered and controlled robotic fish that incorporates an active flexural joint tail fin, activated through conducting polymer actuators based on polypyrrole (PPy). The novel electromaterial muscle oscillator (NEMO) tail fin assembly on the fish could be controlled wirelessly in real time by varying the frequency and duty cycle of the voltage signal supplied to the PPy bending-type actuators. Directional control was achieved by altering the duty cycle of the voltage input to the NEMO tail fin, which shifted the axis of oscillation and enabled turning of the robotic fish. At low speeds, the robotic fish had a turning circle as small as 15 cm (or 1.1 body lengths) in radius. The highest speed of the fish robot was estimated to be approximately 33 mm s-1 (or 0.25 body lengths s-1) and was achieved with a flapping frequency of 0.6-0.8 Hz which also corresponded with the most hydrodynamically efficient mode for tail fin operation. This speed is approximately ten times faster than those for any previously reported artificial muscle based device that also offers real-time speed and directional control. This study contributes to previously published studies on bio-inspired functional devices, demonstrating that electroactive polymer actuators can be real alternatives to conventional means of actuation such as electric motors.

Django Remote Submission

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doucet, Mathieu; Hobson, Tanner C.; Ferraz Leal, Ricardo Miguel

The Django Remote Submission (DRS) is a Django (Django, n.d.) application to manage long running job submission, including starting the job, saving logs, and storing results. It is an independent project available as a standalone pypi package (PyPi, n.d.). It can be easily integrated in any Django project. The source code is freely available as a GitHub repository (django-remote-submission, n.d.). To run the jobs in background, DRS takes advantage of Celery (Celery, n.d.), a powerful asynchronous job queue used for running tasks in the background, and the Redis Server (Redis, n.d.), an in-memory data structure store. Celery uses brokers tomore » pass messages between a Django Project and the Celery workers. Redis is the message broker of DRS. In addition DRS provides real time monitoring of the progress of Jobs and associated logs. Through the Django Channels project (Channels, n.d.), and the usage of Web Sockets, it is possible to asynchronously display the Job Status and the live Job output (standard output and standard error) on a web page.« less

Near Theoretical Gigabit Link Efficiency for Distributed Data Acquisition Systems

PubMed Central

Abu-Nimeh, Faisal T.; Choong, Woon-Seng

2017-01-01

Link efficiency, data integrity, and continuity for high-throughput and real-time systems is crucial. Most of these applications require specialized hardware and operating systems as well as extensive tuning in order to achieve high efficiency. Here, we present an implementation of gigabit Ethernet data streaming which can achieve 99.26% link efficiency while maintaining no packet losses. The design and implementation are built on OpenPET, an opensource data acquisition platform for nuclear medical imaging, where (a) a crate hosting multiple OpenPET detector boards uses a User Datagram Protocol over Internet Protocol (UDP/IP) Ethernet soft-core, that is capable of understanding PAUSE frames, to stream data out to a computer workstation; (b) the receiving computer uses Netmap to allow the processing software (i.e., user space), which is written in Python, to directly receive and manage the network card’s ring buffers, bypassing the operating system kernel’s networking stack; and (c) a multi-threaded application using synchronized queues is implemented in the processing software (Python) to free up the ring buffers as quickly as possible while preserving data integrity and flow continuity. PMID:28630948

Near Theoretical Gigabit Link Efficiency for Distributed Data Acquisition Systems.

PubMed

Abu-Nimeh, Faisal T; Choong, Woon-Seng

2017-03-01

Link efficiency, data integrity, and continuity for high-throughput and real-time systems is crucial. Most of these applications require specialized hardware and operating systems as well as extensive tuning in order to achieve high efficiency. Here, we present an implementation of gigabit Ethernet data streaming which can achieve 99.26% link efficiency while maintaining no packet losses. The design and implementation are built on OpenPET, an opensource data acquisition platform for nuclear medical imaging, where (a) a crate hosting multiple OpenPET detector boards uses a User Datagram Protocol over Internet Protocol (UDP/IP) Ethernet soft-core, that is capable of understanding PAUSE frames, to stream data out to a computer workstation; (b) the receiving computer uses Netmap to allow the processing software (i.e., user space), which is written in Python, to directly receive and manage the network card's ring buffers, bypassing the operating system kernel's networking stack; and (c) a multi-threaded application using synchronized queues is implemented in the processing software (Python) to free up the ring buffers as quickly as possible while preserving data integrity and flow continuity.

Django Remote Submission

DOE PAGES

Doucet, Mathieu; Hobson, Tanner C.; Ferraz Leal, Ricardo Miguel

2017-08-01

The Django Remote Submission (DRS) is a Django (Django, n.d.) application to manage long running job submission, including starting the job, saving logs, and storing results. It is an independent project available as a standalone pypi package (PyPi, n.d.). It can be easily integrated in any Django project. The source code is freely available as a GitHub repository (django-remote-submission, n.d.). To run the jobs in background, DRS takes advantage of Celery (Celery, n.d.), a powerful asynchronous job queue used for running tasks in the background, and the Redis Server (Redis, n.d.), an in-memory data structure store. Celery uses brokers tomore » pass messages between a Django Project and the Celery workers. Redis is the message broker of DRS. In addition DRS provides real time monitoring of the progress of Jobs and associated logs. Through the Django Channels project (Channels, n.d.), and the usage of Web Sockets, it is possible to asynchronously display the Job Status and the live Job output (standard output and standard error) on a web page.« less

File Transfers from Peregrine to the Mass Storage System - Gyrfalcon |

Science.gov Websites

login node or data-transfer queue node. Below is an example to access data-tranfer queue Interactively number of container files using the tar command. For example, $ cd /scratch//directory1 tar files. The rsync command is convenient for handling a large number of files. For example, make

An Empirical Study of the Career Paths of Senior Educational Administrators in Manitoba, Canada: Implications for Career Development

ERIC Educational Resources Information Center

Wallin, Dawn C.

2012-01-01

This paper conceptualizes queue theory (Tallerico & Blount, 2004) to discuss a mixed-methods study that determined the career patterns of senior educational administrators in public school divisions in Manitoba, Canada, compared by position, context and sex. Findings indicate that queue theory has merit for describing the career paths of…

Preventing Bandwidth Abuse at the Router through Sending Rate Estimate-based Active Queue Management

DTIC Science & Technology

2007-06-01

behavior is growing in the Internet. These non-responsive sources can monopolize network bandwidth and starve the “congestion friendly” flows. Without...unnecessarily complex because most of the flows in the Internet are short flows usually termed as “web mice ” [7]. Moreover, having a separate queue for each

Improved diagonal queue medical image steganography using Chaos theory, LFSR, and Rabin cryptosystem.

PubMed

Jain, Mamta; Kumar, Anil; Choudhary, Rishabh Charan

2017-06-01

In this article, we have proposed an improved diagonal queue medical image steganography for patient secret medical data transmission using chaotic standard map, linear feedback shift register, and Rabin cryptosystem, for improvement of previous technique (Jain and Lenka in Springer Brain Inform 3:39-51, 2016). The proposed algorithm comprises four stages, generation of pseudo-random sequences (pseudo-random sequences are generated by linear feedback shift register and standard chaotic map), permutation and XORing using pseudo-random sequences, encryption using Rabin cryptosystem, and steganography using the improved diagonal queues. Security analysis has been carried out. Performance analysis is observed using MSE, PSNR, maximum embedding capacity, as well as by histogram analysis between various Brain disease stego and cover images.

Time-resolved x-ray scattering instrumentation

DOEpatents

Borso, C.S.

1985-11-21

An apparatus and method for increased speed and efficiency of data compilation and analysis in real time is presented in this disclosure. Data is sensed and grouped in combinations in accordance with predetermined logic. The combinations are grouped so that a simplified reduced signal results, such as pairwise summing of data values having offsetting algebraic signs, thereby reducing the magnitude of the net pair sum. Bit storage requirements are reduced and speed of data compilation and analysis is increased by manipulation of shorter bit length data values, making real time evaluation possible.

Advanced Algorithms for Local Routing Strategy on Complex Networks

PubMed Central

Lin, Benchuan; Chen, Bokui; Gao, Yachun; Tse, Chi K.; Dong, Chuanfei; Miao, Lixin; Wang, Binghong

2016-01-01

Despite the significant improvement on network performance provided by global routing strategies, their applications are still limited to small-scale networks, due to the need for acquiring global information of the network which grows and changes rapidly with time. Local routing strategies, however, need much less local information, though their transmission efficiency and network capacity are much lower than that of global routing strategies. In view of this, three algorithms are proposed and a thorough investigation is conducted in this paper. These algorithms include a node duplication avoidance algorithm, a next-nearest-neighbor algorithm and a restrictive queue length algorithm. After applying them to typical local routing strategies, the critical generation rate of information packets Rc increases by over ten-fold and the average transmission time 〈T〉 decreases by 70–90 percent, both of which are key physical quantities to assess the efficiency of routing strategies on complex networks. More importantly, in comparison with global routing strategies, the improved local routing strategies can yield better network performance under certain circumstances. This is a revolutionary leap for communication networks, because local routing strategy enjoys great superiority over global routing strategy not only in terms of the reduction of computational expense, but also in terms of the flexibility of implementation, especially for large-scale networks. PMID:27434502

Advanced Algorithms for Local Routing Strategy on Complex Networks.

PubMed

Lin, Benchuan; Chen, Bokui; Gao, Yachun; Tse, Chi K; Dong, Chuanfei; Miao, Lixin; Wang, Binghong

2016-01-01

Despite the significant improvement on network performance provided by global routing strategies, their applications are still limited to small-scale networks, due to the need for acquiring global information of the network which grows and changes rapidly with time. Local routing strategies, however, need much less local information, though their transmission efficiency and network capacity are much lower than that of global routing strategies. In view of this, three algorithms are proposed and a thorough investigation is conducted in this paper. These algorithms include a node duplication avoidance algorithm, a next-nearest-neighbor algorithm and a restrictive queue length algorithm. After applying them to typical local routing strategies, the critical generation rate of information packets Rc increases by over ten-fold and the average transmission time 〈T〉 decreases by 70-90 percent, both of which are key physical quantities to assess the efficiency of routing strategies on complex networks. More importantly, in comparison with global routing strategies, the improved local routing strategies can yield better network performance under certain circumstances. This is a revolutionary leap for communication networks, because local routing strategy enjoys great superiority over global routing strategy not only in terms of the reduction of computational expense, but also in terms of the flexibility of implementation, especially for large-scale networks.

Experimental and Analytical Studies of Shielding Concepts for Point Sources and Jet Noise.

DTIC Science & Technology

1983-05-01

proximnity of the turbulent jet flow to the The Spectral Dynamics DSP 360 is a two channel real time analyzer incor- shielding surface, the edge will interact...However, this is achieved with a very long shield length equal to 190 unorthodox configurations. The emphasis is placed on the concept, times the slit...16 dB/dec. .Vn With this solid-gaseous combination, a 10 0 diameter shield of length 14 DVf =- sin 0 with a burner attached to the trailing edge

SEL Ada reuse analysis and representations

NASA Technical Reports Server (NTRS)

Kester, Rush

1990-01-01

Overall, it was revealed that the pattern of Ada reuse has evolved from initial reuse of utility components into reuse of generalized application architectures. Utility components were both domain-independent utilities, such as queues and stacks, and domain-specific utilities, such as those that implement spacecraft orbit and attitude mathematical functions and physics or astronomical models. The level of reuse was significantly increased with the development of a generalized telemetry simulator architecture. The use of Ada generics significantly increased the level of verbatum reuse, which is due to the ability, using Ada generics, to parameterize the aspects of design that are configurable during reuse. A key factor in implementing generalized architectures was the ability to use generic subprogram parameters to tailor parts of the algorithm embedded within the architecture. The use of object oriented design (in which objects model real world entities) significantly improved the modularity for reuse. Encapsulating into packages the data and operations associated with common real world entities creates natural building blocks for reuse.

Multi-Step Time Series Forecasting with an Ensemble of Varied Length Mixture Models.

PubMed

Ouyang, Yicun; Yin, Hujun

2018-05-01

Many real-world problems require modeling and forecasting of time series, such as weather temperature, electricity demand, stock prices and foreign exchange (FX) rates. Often, the tasks involve predicting over a long-term period, e.g. several weeks or months. Most existing time series models are inheritably for one-step prediction, that is, predicting one time point ahead. Multi-step or long-term prediction is difficult and challenging due to the lack of information and uncertainty or error accumulation. The main existing approaches, iterative and independent, either use one-step model recursively or treat the multi-step task as an independent model. They generally perform poorly in practical applications. In this paper, as an extension of the self-organizing mixture autoregressive (AR) model, the varied length mixture (VLM) models are proposed to model and forecast time series over multi-steps. The key idea is to preserve the dependencies between the time points within the prediction horizon. Training data are segmented to various lengths corresponding to various forecasting horizons, and the VLM models are trained in a self-organizing fashion on these segments to capture these dependencies in its component AR models of various predicting horizons. The VLM models form a probabilistic mixture of these varied length models. A combination of short and long VLM models and an ensemble of them are proposed to further enhance the prediction performance. The effectiveness of the proposed methods and their marked improvements over the existing methods are demonstrated through a number of experiments on synthetic data, real-world FX rates and weather temperatures.

Estimation of Discontinuous Displacement Vector Fields with the Minimum Description Length Criterion.

DTIC Science & Technology

1990-10-01

type of approach for finding a dense displacement vector field has a time complexity that allows a real - time implementation when an appropriate control...hardly vector fields as they appear in Stereo or motion. The reason for this is the fact that local displacement vector field ( DVF ) esti- mates bave...2 objects’ motion, but that the quantitative optical flow is not a reliable measure of the real motion [VP87, SU87]. This applies even more to the

Lightweight active router-queue management for multimedia networking

NASA Astrophysics Data System (ADS)

Parris, Mark; Jeffay, Kevin; Smith, F. D.

1998-12-01

The Internet research community is promoting active queue management in routers as a proactive means of addressing congestion in the Internet. Active queue management mechanisms such as Random Early Detection (RED) work well for TCP flows but can fail in the presence of unresponsive UDP flows. Recent proposals extend RED to strongly favor TCP and TCP-like flows and to actively penalize `misbehaving' flows. This is problematic for multimedia flows that, although potentially well-behaved, do not, or can not, satisfy the definition of a TCP-like flow. In this paper we investigate an extension to RED active queue management called Class-Based Thresholds (CBT). The goal of CBT is to reduce congestion in routers and to protect TCP from all UDP flows while also ensuring acceptable throughput and latency for well-behaved UDP flows. CBT attempts to realize a `better than best effort' service for well-behaved multimedia flows that is comparable to that achieved by a packet or link scheduling discipline, however, CBT does this by queue management rather than by scheduling. We present results of experiments comparing our mechanisms to plain RED and to FRED, a variant of RED designed to ensure fair allocation of bandwidth amongst flows. We also compare CBT to a packet scheduling scheme. The experiments show that CBT (1) realizes protection for TCP, and (2) provides throughput and end-to-end latency for tagged UDP flows, that is better than that under FRED and RED and comparable to that achieved by packet scheduling. Moreover CBT is a lighter-weight mechanism than FRED in terms of its state requirements and implementation complexity.

Real-time label-free quantitative fluorescence microscopy-based detection of ATP using a tunable fluorescent nano-aptasensor platform.

PubMed

Shrivastava, Sajal; Sohn, Il-Yung; Son, Young-Min; Lee, Won-Il; Lee, Nae-Eung

2015-12-14

Although real-time label-free fluorescent aptasensors based on nanomaterials are increasingly recognized as a useful strategy for the detection of target biomolecules with high fidelity, the lack of an imaging-based quantitative measurement platform limits their implementation with biological samples. Here we introduce an ensemble strategy for a real-time label-free fluorescent graphene (Gr) aptasensor platform. This platform employs aptamer length-dependent tunability, thus enabling the reagentless quantitative detection of biomolecules through computational processing coupled with real-time fluorescence imaging data. We demonstrate that this strategy effectively delivers dose-dependent quantitative readouts of adenosine triphosphate (ATP) concentration on chemical vapor deposited (CVD) Gr and reduced graphene oxide (rGO) surfaces, thereby providing cytotoxicity assessment. Compared with conventional fluorescence spectrometry methods, our highly efficient, universally applicable, and rational approach will facilitate broader implementation of imaging-based biosensing platforms for the quantitative evaluation of a range of target molecules.

Women's Choices within Market Constraints: Re-Visioning Access to and Participation in the Superintendency

ERIC Educational Resources Information Center

Mahitivanichcha, Kanya; Rorrer, Andrea K.

2006-01-01

Purpose: In this article, the authors highlight three constraints--structural time crisis (Schor, 1991) ideal worker norms (Williams, 2000), and labor and occupational queues (Reskin & Roos, 1990; Strober, 1992)--on the decisions and choices of women seeking to advance to and hold positions in the superintendency. Proposed Conceptual Argument: The…

76 FR 55373 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-07

....13(a)(2)(iii: PJM Queue Position W2-075--Original Service Agreement No. 3039 to be effective 7/28... the Commission's eLibrary system by clicking on the links or querying the docket number. Any person... 214 of the Commission's Regulations (18 CFR 385.211 and 385.214) on or before 5 p.m. Eastern time on...

Intel Parallel Studio on the Peregrine System | High-Performance Computing

Science.gov Websites

given below: #!/bin/bash --login #PBS -N #PBS -q #PBS -l nodes=<N> ;:ppn=<n> #PBS -l walltime=00:30:00 #PBS -A # set your tmpdir, and don't collect MPI communication data: #!/bin/bash --login #PBS -N #PBS -q #PBS -l

Delay in polling systems in heavy traffic

NASA Astrophysics Data System (ADS)

van der Mei, Robert D.

1998-10-01

We study the delay in asymmetric cyclic polling systems with general mixtures of gated and exhaustive service, with generally distributed service times and switch-over times, in heavy traffic. We obtain closed-form expressions for all moments of the delay incurred at each of the queues. The expressions are strikingly simple and can even be expressed as finite products of known factors. The results provide new insights into the heavy-traffic behavior of polling systems.

Seeing believes: Watching entangled sculpted branched DNA in real time

NASA Astrophysics Data System (ADS)

Jee, Ah-Young; Guan, Juan; Chen, Kejia; Granick, Steve

2015-03-01

The importance of branching in polymer physics is universally accepted but the details are disputed. We have sculpted DNA to various degrees of branching and used single-molecule tracking to image its diffusion in real time when entangled. By ligating three identical or varying length DNA segments, we construct symmetric and asymmetric ?Y? branches from elements of lambda-DNA with 16 um contour length, allowing for single-molecule visualization of equilibrium dynamics. Using home-written software, a full statistical distribution based on at least hundreds of trajectories is quantified with focus on discriminating arm-retraction from branch point motion. Some part of our observations is consistent with the anticipated ?relaxation through arm retraction? mechanism but other observations do not appear to be anticipated theoretically. Currently working as a researcher in Institute for Basic Science.

LLNL Genomic Assessment: Viral and Bacterial Sequencing Needs for TMTI, Tier 1 Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Slezak, T; Borucki, M; Lenhoff, R

2009-09-29

The Lawrence Livermore National Lab Bioinformatics group has recently taken on a role in DTRA's Transformation Medical Technologies Initiative (TMTI). The high-level goal of TMTI is to accelerate the development of broad-spectrum countermeasures. To achieve those goals, TMTI has a near term need to obtain more sequence information across a large range of pathogens, near neighbors, and across a broad geographical and host range. Our role in this project is to research available sequence data for the organisms of interest and identify critical microbial sequence and knowledge gaps that need to be filled to meet TMTI objectives. This effort includes:more » (1) assessing current genomic sequence for each agent including phylogenetic and geographical diversity, host range, date of isolation range, virulence, sequence availability of key near neighbors, and other characteristics; (2) identifying Subject Matter Experts (SME's) and potential holders of isolate collections, contacting appropriate SME's with known expertise and isolate collections to obtain information on isolate availability and specific recommendations; (3) identifying sequence as well as knowledge gaps (eg virulence, host range, and antibiotic resistance determinants); (4) providing specific recommendations as to the most valuable strains to be placed on the DTRA sequencing queue. We acknowledge that criteria for prioritization of isolates for sequencing falls into two categories aligning with priority queues 1 and 2 as described in the summary. (Priority queue 0 relates to DTRA operational isolates whose availability is not predictable in advance.) 1. Selection of isolates that appear to have likelihood to provide information on virulence and antibiotic resistance. This will include sequence of known virulent strains. Particularly valuable would be virulent strains that have genetically similar yet avirulent, or non human transmissible, counterparts that can be used for comparison to help identify key virulence or host range genes. This approach will provide information that can be used by structural biologists to help develop therapeutics and vaccines. We have pointed out such high priority strains of which we are aware, and note that if any such isolates should be discovered, they will rise to the top priority. We anticipate difficulty locating samples with unusual resistance phenotypes, in particular. Sequencing strategies for isolates in queue 1 should aim for as complete finishing status as possible, since high-quality initial annotation (gene-calling) will be necessary for the follow-on protein structure analyses contributing to countermeasure development. Queue 2 for sequencing determination will be more dynamic than queue 1, and samples will be added to it as they become available to the TMTI program. 2. Selection of isolates that will provide broader information about diversity and phylogenetics and aid in specific detection as well as forensics. This approach focuses on sequencing of isolates that will provide better resolution of variants that are (or were) circulating in nature. The finishing strategy for queue 2 does not require complete closing with annotation. This queue is more static, as there is considerable phylogenetic data, and in this report we have sought to reveal gaps and make suggestions to fill them given existing sequence data and strain information. In this report we identify current sequencing gaps in both priority queue categories. Note that this is most applicable to the bacterial pathogens, as most viruses are by default in queue 1. The Phase I focus of this project is on viral hemorrhagic fever viruses and Category A bacterial agents as defined to us by TMTI. We have carried out individual analyses on each species of interest, and these are included as chapters in this report. Viruses and bacteria are biologically very distinct from each other and require different methods of analysis and criteria for sequencing prioritization. Therefore, we will describe our methods, analyses and conclusions separately for each category.« less

Queueing theoretic analysis of labor and delivery : Understanding management styles and C-section rates.

PubMed

Gombolay, Matthew; Golen, Toni; Shah, Neel; Shah, Julie

2017-09-04

Childbirth is a complex clinical service requiring the coordinated support of highly trained healthcare professionals as well as management of a finite set of critical resources (such as staff and beds) to provide safe care. The mode of delivery (vaginal delivery or cesarean section) has a significant effect on labor and delivery resource needs. Further, resource management decisions may impact the amount of time a physician or nurse is able to spend with any given patient. In this work, we employ queueing theory to model one year of transactional patient information at a tertiary care center in Boston, Massachusetts. First, we observe that the M/G/∞ model effectively predicts patient flow in an obstetrics department. This model captures the dynamics of labor and delivery where patients arrive randomly during the day, the duration of their stay is based on their individual acuity, and their labor progresses at some rate irrespective of whether they are given a bed. Second, using our queueing theoretic model, we show that reducing the rate of cesarean section - a current quality improvement goal in American obstetrics - may have important consequences with regard to the resource needs of a hospital. We also estimate the potential financial impact of these resource needs from the hospital perspective. Third, we report that application of our model to an analysis of potential patient coverage strategies supports the adoption of team-based care, in which attending physicians share responsibilities for patients.

Estimating the average length of hospitalization due to pneumonia: a fuzzy approach.

PubMed

Nascimento, L F C; Rizol, P M S R; Peneluppi, A P

2014-08-29

Exposure to air pollutants is associated with hospitalizations due to pneumonia in children. We hypothesized the length of hospitalization due to pneumonia may be dependent on air pollutant concentrations. Therefore, we built a computational model using fuzzy logic tools to predict the mean time of hospitalization due to pneumonia in children living in São José dos Campos, SP, Brazil. The model was built with four inputs related to pollutant concentrations and effective temperature, and the output was related to the mean length of hospitalization. Each input had two membership functions and the output had four membership functions, generating 16 rules. The model was validated against real data, and a receiver operating characteristic (ROC) curve was constructed to evaluate model performance. The values predicted by the model were significantly correlated with real data. Sulfur dioxide and particulate matter significantly predicted the mean length of hospitalization in lags 0, 1, and 2. This model can contribute to the care provided to children with pneumonia.

Estimating the average length of hospitalization due to pneumonia: a fuzzy approach.

PubMed

Nascimento, L F C; Rizol, P M S R; Peneluppi, A P

2014-11-01

Exposure to air pollutants is associated with hospitalizations due to pneumonia in children. We hypothesized the length of hospitalization due to pneumonia may be dependent on air pollutant concentrations. Therefore, we built a computational model using fuzzy logic tools to predict the mean time of hospitalization due to pneumonia in children living in São José dos Campos, SP, Brazil. The model was built with four inputs related to pollutant concentrations and effective temperature, and the output was related to the mean length of hospitalization. Each input had two membership functions and the output had four membership functions, generating 16 rules. The model was validated against real data, and a receiver operating characteristic (ROC) curve was constructed to evaluate model performance. The values predicted by the model were significantly correlated with real data. Sulfur dioxide and particulate matter significantly predicted the mean length of hospitalization in lags 0, 1, and 2. This model can contribute to the care provided to children with pneumonia.

Queues and care: how medical residents organize their work in a busy clinic.

PubMed

Finlay, W; Mutran, E J; Zeitler, R R; Randall, C S

1990-09-01

How do medical residents organize their work in settings where queue demands are heavy and resources are limited? Under such conditions, a queue theory would predict the delivery of care that is indifferent to clients' needs or that gets rid of clients as quickly as possible. In an exploratory case study of medical residents in a Veterans Administration outpatient clinic, we found instead that the medical residents' work was characterized by a high level of professional commitment: they provided thorough medical examinations and attempted to expedite patient care in other ways. We attribute the residents' professional ethos to opportunities provided in the VA hospital to learn the craft of routine medicine and to be directly responsible for patient care; such opportunities were not available in other settings.

Systolic array processing of the sequential decoding algorithm

NASA Technical Reports Server (NTRS)

Chang, C. Y.; Yao, K.

1989-01-01

A systolic array processing technique is applied to implementing the stack algorithm form of the sequential decoding algorithm. It is shown that sorting, a key function in the stack algorithm, can be efficiently realized by a special type of systolic arrays known as systolic priority queues. Compared to the stack-bucket algorithm, this approach is shown to have the advantages that the decoding always moves along the optimal path, that it has a fast and constant decoding speed and that its simple and regular hardware architecture is suitable for VLSI implementation. Three types of systolic priority queues are discussed: random access scheme, shift register scheme and ripple register scheme. The property of the entries stored in the systolic priority queue is also investigated. The results are applicable to many other basic sorting type problems.

A smartphone application to determine body length for body weight estimation in children: a prospective clinical trial.

PubMed

Wetzel, Oliver; Schmidt, Alexander R; Seiler, Michelle; Scaramuzza, Davide; Seifert, Burkhardt; Spahn, Donat R; Stein, Philipp

2018-06-01

The aim of this study was to test the feasibility and accuracy of a smartphone application to measure the body length of children using the integrated camera and to evaluate the subsequent weight estimates. A prospective clinical trial of children aged 0-<13 years admitted to the emergency department of the University Children's Hospital Zurich. The primary outcome was to validate the length measurement by the smartphone application «Optisizer». The secondary outcome was to correlate the virtually calculated ordinal categories based on the length measured by the app to the categories based on the real length. The third and independent outcome was the comparison of the different weight estimations by physicians, nurses, parents and the app. For all 627 children, the Bland Altman analysis showed a bias of -0.1% (95% CI -0.3-0.2%) comparing real length and length measured by the app. Ordinal categories of real length were in excellent agreement with categories virtually calculated based upon app length (kappa = 0.83, 95% CI 0.79-0.86). Children's real weight was underestimated by physicians (-3.3, 95% CI -4.4 to -2.2%, p < 0.001), nurses (-2.6, 95% CI -3.8 to -1.5%, p < 0.001) and parents (-1.3, 95% CI -1.9 to -0.6%, p < 0.001) but overestimated by categories based upon app length (1.6, 95% CI 0.3-2.8%, p = 0.02) and categories based upon real length (2.3, 95% CI 1.1-3.5%, p < 0.001). Absolute weight differences were lowest, if estimated by the parents (5.4, 95% CI 4.9-5.9%, p < 0.001). This study showed the accuracy of length measurement of children by a smartphone application: body length determined by the smartphone application is in good agreement with the real patient length. Ordinal length categories derived from app-measured length are in excellent agreement with the ordinal length categories based upon the real patient length. The body weight estimations based upon length corresponded to known data and limitations. Precision of body weight estimations by paediatric physicians and nurses were comparable and not different to length based estimations. In this non-emergency setting, parental weight estimation was significantly better than all other means of estimation (paediatric physicians and nurses, length based estimations) in terms of precision and absolute difference.

Computer simulation and discussion of high-accuracy laser direction finding in real time

NASA Astrophysics Data System (ADS)

Chen, Wenyi; Chen, Yongzhi

1997-12-01

On condition that CCD is used as the sensor, there are at least five methods that can be used to realize laser's direction finding with high accuracy. They are: image matching method, radiation center method, geometric center method, center of rectangle envelope method and center of maximum run length method. The first three can get the highest accuracy but working in real-time it is too complicated to realize and the cost is very expansive. The other two can also get high accuracy, and it is not difficult to realize working in real time. By using a single-chip microcomputer and an ordinary CCD camera a very simple system can get the position information of a laser beam. The data rate is 50 times per second.

NASA Research on an Integrated Concept for Airport Surface Operations Management

NASA Technical Reports Server (NTRS)

Gupta, Gautam

2012-01-01

Surface operations at airports in the US are based on tactical operations, where departure aircraft primarily queue up and wait at the departure runways. There have been attempts to address the resulting inefficiencies with both strategic and tactical tools for metering departure aircraft. This presentation gives an overview of Spot And Runway Departure Advisor with Collaborative Decision Making (SARDA-CDM): an integrated strategic and tactical system for improving surface operations by metering departure aircraft. SARDA-CDM is the augmentation of ground and local controller advisories through sharing of flight movement and related operations information between airport operators, flight operators and air traffic control at the airport. The goal is to enhance the efficiency of airport surface operations by exchanging information between air traffic control and airline operators, while minimizing adverse effects on stakeholders and passengers. The presentation motivates the need for departure metering, and provides a brief background on the previous work on SARDA. Then, the concept of operations for SARDA-CDM is described. Then the preliminary results from testing the concept in a real-time automated simulation environment are described. Results indicate benefits such as reduction in taxiing delay and fuel consumption. Further, the preliminary implementation of SARDA-CDM seems robust for two minutes delay in gate push-back times.

A real-time computational model for estimating kinematics of ankle ligaments.

PubMed

Zhang, Mingming; Davies, T Claire; Zhang, Yanxin; Xie, Sheng Quan

2016-01-01

An accurate assessment of ankle ligament kinematics is crucial in understanding the injury mechanisms and can help to improve the treatment of an injured ankle, especially when used in conjunction with robot-assisted therapy. A number of computational models have been developed and validated for assessing the kinematics of ankle ligaments. However, few of them can do real-time assessment to allow for an input into robotic rehabilitation programs. An ankle computational model was proposed and validated to quantify the kinematics of ankle ligaments as the foot moves in real-time. This model consists of three bone segments with three rotational degrees of freedom (DOFs) and 12 ankle ligaments. This model uses inputs for three position variables that can be measured from sensors in many ankle robotic devices that detect postures within the foot-ankle environment and outputs the kinematics of ankle ligaments. Validation of this model in terms of ligament length and strain was conducted by comparing it with published data on cadaver anatomy and magnetic resonance imaging. The model based on ligament lengths and strains is in concurrence with those from the published studies but is sensitive to ligament attachment positions. This ankle computational model has the potential to be used in robot-assisted therapy for real-time assessment of ligament kinematics. The results provide information regarding the quantification of kinematics associated with ankle ligaments related to the disability level and can be used for optimizing the robotic training trajectory.

A Multi-Objective Compounded Local Mobile Cloud Architecture Using Priority Queues to Process Multiple Jobs.

PubMed

Wei, Xiaohui; Sun, Bingyi; Cui, Jiaxu; Xu, Gaochao

2016-01-01

As a result of the greatly increased use of mobile devices, the disadvantages of portable devices have gradually begun to emerge. To solve these problems, the use of mobile cloud computing assisted by cloud data centers has been proposed. However, cloud data centers are always very far from the mobile requesters. In this paper, we propose an improved multi-objective local mobile cloud model: Compounded Local Mobile Cloud Architecture with Dynamic Priority Queues (LMCpri). This new architecture could briefly store jobs that arrive simultaneously at the cloudlet in different priority positions according to the result of auction processing, and then execute partitioning tasks on capable helpers. In the Scheduling Module, NSGA-II is employed as the scheduling algorithm to shorten processing time and decrease requester cost relative to PSO and sequential scheduling. The simulation results show that the number of iteration times that is defined to 30 is the best choice of the system. In addition, comparing with LMCque, LMCpri is able to effectively accommodate a requester who would like his job to be executed in advance and shorten execution time. Finally, we make a comparing experiment between LMCpri and cloud assisting architecture, and the results reveal that LMCpri presents a better performance advantage than cloud assisting architecture.

A Multi-Objective Compounded Local Mobile Cloud Architecture Using Priority Queues to Process Multiple Jobs

PubMed Central

Wei, Xiaohui; Sun, Bingyi; Cui, Jiaxu; Xu, Gaochao

2016-01-01

As a result of the greatly increased use of mobile devices, the disadvantages of portable devices have gradually begun to emerge. To solve these problems, the use of mobile cloud computing assisted by cloud data centers has been proposed. However, cloud data centers are always very far from the mobile requesters. In this paper, we propose an improved multi-objective local mobile cloud model: Compounded Local Mobile Cloud Architecture with Dynamic Priority Queues (LMCpri). This new architecture could briefly store jobs that arrive simultaneously at the cloudlet in different priority positions according to the result of auction processing, and then execute partitioning tasks on capable helpers. In the Scheduling Module, NSGA-II is employed as the scheduling algorithm to shorten processing time and decrease requester cost relative to PSO and sequential scheduling. The simulation results show that the number of iteration times that is defined to 30 is the best choice of the system. In addition, comparing with LMCque, LMCpri is able to effectively accommodate a requester who would like his job to be executed in advance and shorten execution time. Finally, we make a comparing experiment between LMCpri and cloud assisting architecture, and the results reveal that LMCpri presents a better performance advantage than cloud assisting architecture. PMID:27419854

Comparison of a Visual and Head Tactile Display for Soldier Navigation

DTIC Science & Technology

2013-12-01

environments for nuclear power plant operators, air traffic controllers, and pilots are information intensive. These environments usually involve the indirect...queue, correcting aircraft conflicts, giving instruction, clearance and advice to pilots , and assigning aircrafts to other work queues and airports...these dynamic, complex, and multitask environments (1) collect and integrate a plethora of visual information into decisions that are critical for

A queueing model of pilot decision making in a multi-task flight management situation

NASA Technical Reports Server (NTRS)

Walden, R. S.; Rouse, W. B.

1977-01-01

Allocation of decision making responsibility between pilot and computer is considered and a flight management task, designed for the study of pilot-computer interaction, is discussed. A queueing theory model of pilot decision making in this multi-task, control and monitoring situation is presented. An experimental investigation of pilot decision making and the resulting model parameters are discussed.

Optimizing Crisis Action Planning in the Noncombatant Evacuation Operation Setting

DTIC Science & Technology

2010-06-01

Federal Regulations, the DoS has a firm rule to not enter into preemptive contracts for any logistical resources (e.g., transportation, food, water...bottlenecks, flow limiters, and options to quicken queues ; and identifying resources and transportation mediums that display the most sensitivity to...policy changes. These objectives were addressed by exploring topics in NEOs, evacuation planning, queueing systems, and modeling techniques and

Data Interconnection Exploration

NASA Technical Reports Server (NTRS)

Iniguez, Alfredo Bravo

2011-01-01

This project involves innovating the way the Quality Assurance organization at the Jet Propulsion Laboratory (JPL) tracks the receiving inspection of JPL Critical Items (JCI) procured from suppliers. The Quality Assurance organization uses a Microsoft Access based front-end to enter items into an inspection queue. The current design has grown to be much more than was expected when the inspection queue system was created in 2007. The goal is to migrate to a web based solution that will allow the handling of more data, multiple input interfaces, and customizable display options. This has been achieved by implementing a divided tables scheme, the use of ColdFusion programming language, and the usage of Web 2.0 technologies such as AJAX and jQuery. These updates will allow for future expansion as well as the standardization of inspection queues for the Quality Assurance organization. When engineers and scientists order flight hardware, they cannot use it straight away. After a spacecraft or a satellite has been launched, it will be impossible to repair; therefore, the parts used must be inspected to make sure they are operating correctly and within the required specifications. The task of inspecting these JPL Critical Items (JCI) falls on the Quality Assurance organization. One of the tools the receiving inspection group uses is a database to maintain a queue of inspections that need to be done and of inspections that have been completed. The current Access interface has worked well but increased amounts of data, multiple input interfaces, and changes to how data is handled have made it necessary to seek a new way of organizing items for inspection. In addition, the different inspection groups have recently been merged and each has different ways of keeping track of inspection information. The ultimate goal is for the new group to have one shared inspection queue and website. To achieve this goal, I have been working with Ian Luczon of Procurement Quality Assurance and 3 Myers Hawkins, another intern, to not only create the new queue for receiving inspection but also a central web portal for the newly combined inspection group.

Individual dispersal delays in a cooperative breeder: Ecological constraints, the benefits of philopatry and the social queue for dominance.

PubMed

Nelson-Flower, Martha J; Wiley, Elizabeth M; Flower, Tom P; Ridley, Amanda R

2018-03-20

Delayed dispersal is a key step in the evolution of familial animal societies and cooperative breeding. However, no consensus has been reached on the ecological and social circumstances driving delayed dispersal. Here, we test predictions from the ecological constraints and benefits of philopatry hypotheses as well as the recently proposed dual benefits hypothesis to better understand the evolution of group-living and cooperative breeding. Furthermore, we consider how individual social circumstances within groups affect dispersal decisions. We examine 11 years of life-history information on a wild population of cooperatively breeding southern pied babblers Turdoides bicolor. We investigate the effects of ecological conditions, natal-group membership and individual social context on male and female dispersal delays, disperser survival and acquisition of dominance. Female dispersal decisions are generally unconstrained by ecological or social circumstances. In contrast, males disperse in response to relaxed ecological constraints, decreases in nepotistic tolerance or when low social rank in the queue for dominance decreases their likelihood of gaining a dominant breeding position. Early dispersal by end-of-queue males often leads to a head-of-queue subordinate position in a non-natal group, thereby increasing access to dominant breeding positions. However, males and females remaining in natal groups gain benefits of philopatry via increased survival and, for head-of-queue males, very high likelihood of acquisition of a breeding position. Overall, predictions from the dual benefits hypothesis best describe these results, while some predictions from each of the ecological constraints and benefits of philopatry hypotheses were supported. The benefits of living and working together (collective action benefits) in large stable groups are of central importance in shaping dispersal delays in southern pied babbler societies. In addition, position in the subordinate social queue for dominance is the key in determining access to reproduction, particularly for males. This research highlights the importance of considering the costs and benefits of individual social circumstances in dispersal decisions and illustrates how the dual benefits hypothesis offers new perspectives in understanding delayed dispersal. © 2018 The Authors. Journal of Animal Ecology © 2018 British Ecological Society.

Extending the Memory of Microcomputers

NASA Technical Reports Server (NTRS)

Wiker, G. A.

1984-01-01

Memory increased while retaining real-time capabilities. Extra memory capacity added to microprocessor without increasing memory address length and special transfer instructions by dedicating block of space in main memory to hold addresses of locations in extra memory.

An approach of traffic signal control based on NLRSQP algorithm

NASA Astrophysics Data System (ADS)

Zou, Yuan-Yang; Hu, Yu

2017-11-01

This paper presents a linear program model with linear complementarity constraints (LPLCC) to solve traffic signal optimization problem. The objective function of the model is to obtain the minimization of total queue length with weight factors at the end of each cycle. Then, a combination algorithm based on the nonlinear least regression and sequence quadratic program (NLRSQP) is proposed, by which the local optimal solution can be obtained. Furthermore, four numerical experiments are proposed to study how to set the initial solution of the algorithm that can get a better local optimal solution more quickly. In particular, the results of numerical experiments show that: The model is effective for different arrival rates and weight factors; and the lower bound of the initial solution is, the better optimal solution can be obtained.

Ultrafast, sensitive and large-volume on-chip real-time PCR for the molecular diagnosis of bacterial and viral infections.

PubMed

Houssin, Timothée; Cramer, Jérémy; Grojsman, Rébecca; Bellahsene, Lyes; Colas, Guillaume; Moulet, Hélène; Minnella, Walter; Pannetier, Christophe; Leberre, Maël; Plecis, Adrien; Chen, Yong

2016-04-21

To control future infectious disease outbreaks, like the 2014 Ebola epidemic, it is necessary to develop ultrafast molecular assays enabling rapid and sensitive diagnoses. To that end, several ultrafast real-time PCR systems have been previously developed, but they present issues that hinder their wide adoption, notably regarding their sensitivity and detection volume. An ultrafast, sensitive and large-volume real-time PCR system based on microfluidic thermalization is presented herein. The method is based on the circulation of pre-heated liquids in a microfluidic chip that thermalize the PCR chamber by diffusion and ultrafast flow switches. The system can achieve up to 30 real-time PCR cycles in around 2 minutes, which makes it the fastest PCR thermalization system for regular sample volume to the best of our knowledge. After biochemical optimization, anthrax and Ebola simulating agents could be respectively detected by a real-time PCR in 7 minutes and a reverse transcription real-time PCR in 7.5 minutes. These detections are respectively 6.4 and 7.2 times faster than with an off-the-shelf apparatus, while conserving real-time PCR sample volume, efficiency, selectivity and sensitivity. The high-speed thermalization also enabled us to perform sharp melting curve analyses in only 20 s and to discriminate amplicons of different lengths by rapid real-time PCR. This real-time PCR microfluidic thermalization system is cost-effective, versatile and can be then further developed for point-of-care, multiplexed, ultrafast and highly sensitive molecular diagnoses of bacterial and viral diseases.

Adaptive convex combination approach for the identification of improper quaternion processes.

PubMed

Ujang, Bukhari Che; Jahanchahi, Cyrus; Took, Clive Cheong; Mandic, Danilo P

2014-01-01

Data-adaptive optimal modeling and identification of real-world vector sensor data is provided by combining the fractional tap-length (FT) approach with model order selection in the quaternion domain. To account rigorously for the generality of such processes, both second-order circular (proper) and noncircular (improper), the proposed approach in this paper combines the FT length optimization with both the strictly linear quaternion least mean square (QLMS) and widely linear QLMS (WL-QLMS). A collaborative approach based on QLMS and WL-QLMS is shown to both identify the type of processes (proper or improper) and to track their optimal parameters in real time. Analysis shows that monitoring the evolution of the convex mixing parameter within the collaborative approach allows us to track the improperness in real time. Further insight into the properties of those algorithms is provided by establishing a relationship between the steady-state error and optimal model order. The approach is supported by simulations on model order selection and identification of both strictly linear and widely linear quaternion-valued systems, such as those routinely used in renewable energy (wind) and human-centered computing (biomechanics).

Applying a foil queue micro-electrode in micro-EDM to fabricate a 3D micro-structure

NASA Astrophysics Data System (ADS)

Xu, Bin; Guo, Kang; Wu, Xiao-yu; Lei, Jian-guo; Liang, Xiong; Guo, Deng-ji; Ma, Jiang; Cheng, Rong

2018-05-01

Applying a 3D micro-electrode in a micro electrical discharge machining (micro-EDM) can fabricate a 3D micro-structure with an up and down reciprocating method. However, this processing method has some shortcomings, such as a low success rate and a complex process for fabrication of 3D micro-electrodes. By focusing on these shortcomings, this paper proposed a novel 3D micro-EDM process based on the foil queue micro-electrode. Firstly, a 3D micro-electrode was discretized into several foil micro-electrodes and these foil micro-electrodes constituted a foil queue micro-electrode. Then, based on the planned process path, foil micro-electrodes were applied in micro-EDM sequentially and the micro-EDM results of each foil micro-electrode were able to superimpose the 3D micro-structure. However, the step effect will occur on the 3D micro-structure surface, which has an adverse effect on the 3D micro-structure. To tackle this problem, this paper proposes to reduce this adverse effect by rounded corner wear at the end of the foil micro-electrode and studies the impact of machining parameters on rounded corner wear and the step effect on the micro-structure surface. Finally, using a wire cutting voltage of 80 V, a current of 0.5 A and a pulse width modulation ratio of 1:4, the foil queue micro-electrode was fabricated by wire electrical discharge machining. Also, using a pulse width of 100 ns, a pulse interval of 200 ns, a voltage of 100 V and workpiece material of 304# stainless steel, the foil queue micro-electrode was applied in micro-EDM for processing of a 3D micro-structure with hemispherical features, which verified the feasibility of this process.

Extended observability of linear time-invariant systems under recurrent loss of output data

NASA Technical Reports Server (NTRS)

Luck, Rogelio; Ray, Asok; Halevi, Yoram

1989-01-01

Recurrent loss of sensor data in integrated control systems of an advanced aircraft may occur under different operating conditions that include detected frame errors and queue saturation in computer networks, and bad data suppression in signal processing. This paper presents an extension of the concept of observability based on a set of randomly selected nonconsecutive outputs in finite-dimensional, linear, time-invariant systems. Conditions for testing extended observability have been established.

Stochastic Control and Numerical Methods with Applications to Communications. Game Theoretic/Subsolution to Importance Sampling for Rare Event Simulation

DTIC Science & Technology

2008-11-01

support to the value of the approach. 9. Scheduling and Control of Mobile Communications Networks with Randomly Time Varying Channels by Stability ...biological systems . Many examples arise in communications and queueing, due to the finite speed of signal transmission, the nonnegligible time required...without delays, the system state takes values in a subset of some finite -dimensional Euclidean space, and the control is a functional of the current

49 CFR 37.131 - Service criteria for complementary paratransit.

Code of Federal Regulations, 2014 CFR

2014-10-01

...'s desired departure time. (3) The entity may use real-time scheduling in providing complementary... trip of similar length, at a similar time of day, on the fixed route system. (2) The fares for... systems, the service area shall consist of a circle with a radius of 3/4 of a mile around each station...

49 CFR 37.131 - Service criteria for complementary paratransit.

Code of Federal Regulations, 2013 CFR

2013-10-01

...'s desired departure time. (3) The entity may use real-time scheduling in providing complementary... trip of similar length, at a similar time of day, on the fixed route system. (2) The fares for... systems, the service area shall consist of a circle with a radius of 3/4 of a mile around each station...

49 CFR 37.131 - Service criteria for complementary paratransit.

Code of Federal Regulations, 2012 CFR

2012-10-01

...'s desired departure time. (3) The entity may use real-time scheduling in providing complementary... trip of similar length, at a similar time of day, on the fixed route system. (2) The fares for... systems, the service area shall consist of a circle with a radius of 3/4 of a mile around each station...

49 CFR 37.131 - Service criteria for complementary paratransit.

Code of Federal Regulations, 2011 CFR

2011-10-01

...'s desired departure time. (3) The entity may use real-time scheduling in providing complementary... trip of similar length, at a similar time of day, on the fixed route system. (2) The fares for... systems, the service area shall consist of a circle with a radius of 3/4 of a mile around each station...

49 CFR 37.131 - Service criteria for complementary paratransit.

Code of Federal Regulations, 2010 CFR

2010-10-01

...'s desired departure time. (3) The entity may use real-time scheduling in providing complementary... trip of similar length, at a similar time of day, on the fixed route system. (2) The fares for... systems, the service area shall consist of a circle with a radius of 3/4 of a mile around each station...

A Mathematical Model of the Illinois Interlibrary Loan Network: Project Report Number 2.

ERIC Educational Resources Information Center

Rouse, William B.; And Others

The development of a mathematical model of the Illinois Library and Information Network (ILLINET) is described. Based on queueing network theory, the model predicts the probability of a request being satisfied, the average time from the initiation of a request to the receipt of the desired resources, the costs, and the processing loads. Using a…

Computational steering of GEM based detector simulations

NASA Astrophysics Data System (ADS)

Sheharyar, Ali; Bouhali, Othmane

2017-10-01

Gas based detector R&D relies heavily on full simulation of detectors and their optimization before final prototypes can be built and tested. These simulations in particular those with complex scenarios such as those involving high detector voltages or gas with larger gains are computationally intensive may take several days or weeks to complete. These long-running simulations usually run on the high-performance computers in batch mode. If the results lead to unexpected behavior, then the simulation might be rerun with different parameters. However, the simulations (or jobs) may have to wait in a queue until they get a chance to run again because the supercomputer is a shared resource that maintains a queue of other user programs as well and executes them as time and priorities permit. It may result in inefficient resource utilization and increase in the turnaround time for the scientific experiment. To overcome this issue, the monitoring of the behavior of a simulation, while it is running (or live), is essential. In this work, we employ the computational steering technique by coupling the detector simulations with a visualization package named VisIt to enable the exploration of the live data as it is produced by the simulation.

Scanning-time evaluation of Digimarc Barcode

NASA Astrophysics Data System (ADS)

Gerlach, Rebecca; Pinard, Dan; Weaver, Matt; Alattar, Adnan

2015-03-01

This paper presents a speed comparison between the use of Digimarc® Barcodes and the Universal Product Code (UPC) for customer checkout at point of sale (POS). The recently introduced Digimarc Barcode promises to increase the speed of scanning packaged goods at POS. When this increase is exploited by workforce optimization systems, the retail industry could potentially save billions of dollars. The Digimarc Barcode is based on Digimarc's watermarking technology, and it is imperceptible, very robust, and does not require any special ink, material, or printing processes. Using an image-based scanner, a checker can quickly scan consumer packaged goods (CPG) embedded with the Digimarc Barcode without the need to reorient the packages with respect to the scanner. Faster scanning of packages saves money and enhances customer satisfaction. It reduces the length of the queues at checkout, reduces the cost of cashier labor, and makes self-checkout more convenient. This paper quantifies the increase in POS scanning rates resulting from the use of the Digimarc Barcode versus the traditional UPC. It explains the testing methodology, describes the experimental setup, and analyzes the obtained results. It concludes that the Digimarc Barcode increases number of items per minute (IPM) scanned at least 50% over traditional UPC.

High capacity low delay packet broadcasting multiaccess schemes for satellite repeater systems

NASA Astrophysics Data System (ADS)

Bose, S. K.

1980-12-01

Demand assigned packet radio schemes using satellite repeaters can achieve high capacities but often exhibit relatively large delays under low traffic conditions when compared to random access. Several schemes which improve delay performance at low traffic but which have high capacity are presented and analyzed. These schemes allow random acess attempts by users, who are waiting for channel assignments. The performance of these are considered in the context of a multiple point communication system carrying fixed length messages between geographically distributed (ground) user terminals which are linked via a satellite repeater. Channel assignments are done following a BCC queueing discipline by a (ground) central controller on the basis of requests correctly received over a collision type access channel. In TBACR Scheme A, some of the forward message channels are set aside for random access transmissions; the rest are used in a demand assigned mode. Schemes B and C operate all their forward message channels in a demand assignment mode but, by means of appropriate algorithms for trailer channel selection, allow random access attempts on unassigned channels. The latter scheme also introduces framing and slotting of the time axis to implement a more efficient algorithm for trailer channel selection than the former.

Undersea Laser Communications Field Test at the Naval Undersea Warfare Center (NUWC)

DTIC Science & Technology

2016-08-30

and blue wavelength scenario suggests links in excess of 400 meters are achievable with small, low-power, narrow-beam lasercom terminals. The field...of 7.6 meters , which corresponded to between 8–12 beam extinction lengths. The PMT demonstration included real-time electronics to perform...communications link was demonstrated over 4.8 meters (5 beam extinction lengths) with an APD receiver. Communications and characterization data were

Multi-protocol header generation system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberts, David A.; Ignatowski, Michael; Jayasena, Nuwan

A communication device includes a data source that generates data for transmission over a bus, and a data encoder that receives and encodes outgoing data. An encoder system receives outgoing data from a data source and stores the outgoing data in a first queue. An encoder encodes outgoing data with a header type that is based upon a header type indication from a controller and stores the encoded data that may be a packet or a data word with at least one layered header in a second queue for transmission. The device is configured to receive at a payload extractor,more » a packet protocol change command from the controller and to remove the encoded data and to re-encode the data to create a re-encoded data packet and placing the re-encoded data packet in the second queue for transmission.« less

Adaptive allocation of decisionmaking responsibility between human and computer in multitask situations

NASA Technical Reports Server (NTRS)

Chu, Y.-Y.; Rouse, W. B.

1979-01-01

As human and computer come to have overlapping decisionmaking abilities, a dynamic or adaptive allocation of responsibilities may be the best mode of human-computer interaction. It is suggested that the computer serve as a backup decisionmaker, accepting responsibility when human workload becomes excessive and relinquishing responsibility when workload becomes acceptable. A queueing theory formulation of multitask decisionmaking is used and a threshold policy for turning the computer on/off is proposed. This policy minimizes event-waiting cost subject to human workload constraints. An experiment was conducted with a balanced design of several subject runs within a computer-aided multitask flight management situation with different task demand levels. It was found that computer aiding enhanced subsystem performance as well as subjective ratings. The queueing model appears to be an adequate representation of the multitask decisionmaking situation, and to be capable of predicting system performance in terms of average waiting time and server occupancy. Server occupancy was further found to correlate highly with the subjective effort ratings.

Assessing the Queuing Process Using Data Envelopment Analysis: an Application in Health Centres.

PubMed

Safdar, Komal A; Emrouznejad, Ali; Dey, Prasanta K

2016-01-01

Queuing is one of the very important criteria for assessing the performance and efficiency of any service industry, including healthcare. Data Envelopment Analysis (DEA) is one of the most widely-used techniques for performance measurement in healthcare. However, no queue management application has been reported in the health-related DEA literature. Most of the studies regarding patient flow systems had the objective of improving an already existing Appointment System. The current study presents a novel application of DEA for assessing the queuing process at an Outpatients' department of a large public hospital in a developing country where appointment systems do not exist. The main aim of the current study is to demonstrate the usefulness of DEA modelling in the evaluation of a queue system. The patient flow pathway considered for this study consists of two stages; consultation with a doctor and pharmacy. The DEA results indicated that waiting times and other related queuing variables included need considerable minimisation at both stages.

GrammarViz 3.0: Interactive Discovery of Variable-Length Time Series Patterns

DOE PAGES

Senin, Pavel; Lin, Jessica; Wang, Xing; ...

2018-02-23

The problems of recurrent and anomalous pattern discovery in time series, e.g., motifs and discords, respectively, have received a lot of attention from researchers in the past decade. However, since the pattern search space is usually intractable, most existing detection algorithms require that the patterns have discriminative characteristics and have its length known in advance and provided as input, which is an unreasonable requirement for many real-world problems. In addition, patterns of similar structure, but of different lengths may co-exist in a time series. In order to address these issues, we have developed algorithms for variable-length time series pattern discoverymore » that are based on symbolic discretization and grammar inference—two techniques whose combination enables the structured reduction of the search space and discovery of the candidate patterns in linear time. In this work, we present GrammarViz 3.0—a software package that provides implementations of proposed algorithms and graphical user interface for interactive variable-length time series pattern discovery. The current version of the software provides an alternative grammar inference algorithm that improves the time series motif discovery workflow, and introduces an experimental procedure for automated discretization parameter selection that builds upon the minimum cardinality maximum cover principle and aids the time series recurrent and anomalous pattern discovery.« less

GrammarViz 3.0: Interactive Discovery of Variable-Length Time Series Patterns

DOE Office of Scientific and Technical Information (OSTI.GOV)

Senin, Pavel; Lin, Jessica; Wang, Xing

The problems of recurrent and anomalous pattern discovery in time series, e.g., motifs and discords, respectively, have received a lot of attention from researchers in the past decade. However, since the pattern search space is usually intractable, most existing detection algorithms require that the patterns have discriminative characteristics and have its length known in advance and provided as input, which is an unreasonable requirement for many real-world problems. In addition, patterns of similar structure, but of different lengths may co-exist in a time series. In order to address these issues, we have developed algorithms for variable-length time series pattern discoverymore » that are based on symbolic discretization and grammar inference—two techniques whose combination enables the structured reduction of the search space and discovery of the candidate patterns in linear time. In this work, we present GrammarViz 3.0—a software package that provides implementations of proposed algorithms and graphical user interface for interactive variable-length time series pattern discovery. The current version of the software provides an alternative grammar inference algorithm that improves the time series motif discovery workflow, and introduces an experimental procedure for automated discretization parameter selection that builds upon the minimum cardinality maximum cover principle and aids the time series recurrent and anomalous pattern discovery.« less

Model Predictive Control-based gait pattern generation for wearable exoskeletons.

PubMed

Wang, Letian; van Asseldonk, Edwin H F; van der Kooij, Herman

2011-01-01

This paper introduces a new method for controlling wearable exoskeletons that do not need predefined joint trajectories. Instead, it only needs basic gait descriptors such as step length, swing duration, and walking speed. End point Model Predictive Control (MPC) is used to generate the online joint trajectories based on these gait parameters. Real-time ability and control performance of the method during the swing phase of gait cycle is studied in this paper. Experiments are performed by helping a human subject swing his leg with different patterns in the LOPES gait trainer. Results show that the method is able to assist subjects to make steps with different step length and step duration without predefined joint trajectories and is fast enough for real-time implementation. Future study of the method will focus on controlling the exoskeletons in the entire gait cycle. © 2011 IEEE

Design of a surface-scanning coil detector for direct bacteria detection on food surfaces using a magnetoelastic biosensor

NASA Astrophysics Data System (ADS)

Chai, Yating; Wikle, Howard C.; Wang, Zhenyu; Horikawa, Shin; Best, Steve; Cheng, Zhongyang; Dyer, Dave F.; Chin, Bryan A.

2013-09-01

The real-time, in-situ bacteria detection on food surfaces was achieved by using a magnetoelastic biosensor combined with a surface-scanning coil detector. This paper focuses on the coil design for signal optimization. The coil was used to excite the sensor's vibration and detect its resonant frequency signal. The vibrating sensor creates a magnetic flux change around the coil, which then produces a mutual inductance. In order to enhance the signal amplitude, a theory of the sensor's mutual inductance with the measurement coil is proposed. Both theoretical calculations and experimental data showed that the working length of the coil has a significant effect on the signal amplitude. For a 1 mm-long sensor, a coil with a working length of 1.3 mm showed the best signal amplitude. The real-time detection of Salmonella bacteria on a fresh food surface was demonstrated using this new technology.

Content Dynamics Over the Network Cloud

DTIC Science & Technology

2015-11-04

Ferragut, “Trading Off Efficiency and Reciprocity in Wireless Peer- To-Peer File Sharing”, WiOpt 2015, Mumbai , India, May 2015. 11. A. Ferragut, F...inspired by queueing theory”, RSRG Seminar, Caltech, March 2015. q) Presentation of paper [10] by the PI at WiOpt, Mumbai , India, May 2015...2015, Mumbai , India, May 2015. 11. A. Ferragut, F. Paganini, "Queueing analysis of peer-to-peer swarms: stationary distributions and their scaling

Using Markov Decision Processes with Heterogeneous Queueing Systems to Examine Military MEDEVAC Dispatching Policies

DTIC Science & Technology

2017-03-23

Air Force Institute of Technology AFIT Scholar Theses and Dissertations 3-23-2017 Using Markov Decision Processes with Heterogeneous Queueing Systems... TECHNOLOGY Wright-Patterson Air Force Base, Ohio DISTRIBUTION STATEMENT A APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED. The views expressed in...POLICIES THESIS Presented to the Faculty Department of Operational Sciences Graduate School of Engineering and Management Air Force Institute of Technology

Predictive functional control for active queue management in congested TCP/IP networks.

PubMed

Bigdeli, N; Haeri, M

2009-01-01

Predictive functional control (PFC) as a new active queue management (AQM) method in dynamic TCP networks supporting explicit congestion notification (ECN) is proposed. The ability of the controller in handling system delay along with its simplicity and low computational load makes PFC a privileged AQM method in the high speed networks. Besides, considering the disturbance term (which represents model/process mismatches, external disturbances, and existing noise) in the control formulation adds some level of robustness into the PFC-AQM controller. This is an important and desired property in the control of dynamically-varying computer networks. In this paper, the controller is designed based on a small signal linearized fluid-flow model of the TCP/AQM networks. Then, closed-loop transfer function representation of the system is derived to analyze the robustness with respect to the network and controller parameters. The analytical as well as the packet-level ns-2 simulation results show the out-performance of the developed controller for both queue regulation and resource utilization. Fast response, low queue fluctuations (and consequently low delay jitter), high link utilization, good disturbance rejection, scalability, and low packet marking probability are other features of the developed method with respect to other well-known AQM methods such as RED, PI, and REM which are also simulated for comparison.

A real-time monitoring system for the facial nerve.

PubMed

Prell, Julian; Rachinger, Jens; Scheller, Christian; Alfieri, Alex; Strauss, Christian; Rampp, Stefan

2010-06-01

Damage to the facial nerve during surgery in the cerebellopontine angle is indicated by A-trains, a specific electromyogram pattern. These A-trains can be quantified by the parameter "traintime," which is reliably correlated with postoperative functional outcome. The system presented was designed to monitor traintime in real-time. A dedicated hardware and software platform for automated continuous analysis of the intraoperative facial nerve electromyogram was specifically designed. The automatic detection of A-trains is performed by a software algorithm for real-time analysis of nonstationary biosignals. The system was evaluated in a series of 30 patients operated on for vestibular schwannoma. A-trains can be detected and measured automatically by the described method for real-time analysis. Traintime is monitored continuously via a graphic display and is shown as an absolute numeric value during the operation. It is an expression of overall, cumulated length of A-trains in a given channel; a high correlation between traintime as measured by real-time analysis and functional outcome immediately after the operation (Spearman correlation coefficient [rho] = 0.664, P < .001) and in long-term outcome (rho = 0.631, P < .001) was observed. Automated real-time analysis of the intraoperative facial nerve electromyogram is the first technique capable of reliable continuous real-time monitoring. It can critically contribute to the estimation of functional outcome during the course of the operative procedure.

Proceedings of Symposium on Climatic Parameters in Radiowave Propagation Prediction, Climpara 94 Held in Moscow, Russia on 13 May - 3 June 1994

DTIC Science & Technology

1994-01-01

data acquisition systems and run radio, but due to the short wave length the synchronously. light is more sensible to scattering by small Lidar...the raingauge records from the stations Jaen, in the central part of Andalusia, and Badajoz located in this region (Valladolid, Zamora, and Ciudad Real...EN 20-20.0.72H -- CIUDAD REAL Ix ( > to.I to- t-’l PERCENTAGE OF TIME ()PERCENTAGE OF ’TIME() Figure 9. Relative errors for Western Andalusia Figure 10

Real-time gas sensing based on optical feedback in a terahertz quantum-cascade laser.

PubMed

Hagelschuer, Till; Wienold, Martin; Richter, Heiko; Schrottke, Lutz; Grahn, Holger T; Hübers, Heinz-Wilhelm

2017-11-27

We report on real-time gas sensing with a terahertz quantum-cascade laser (QCL). The method is solely based on the modulation of the external cavity length, exploiting the intermediate optical feedback regime. While the QCL is operated in continuous-wave mode, optical feedback results in a change of the QCL frequency as well as its terminal voltage. The first effect is exploited to tune the lasing frequency across a molecular absorption line. The second effect is used for the detection of the self-mixing signal. This allows for fast measurement times on the order of 10 ms per spectrum and for real-time measurements of gas concentrations with a rate of 100 Hz. This technique is demonstrated with a mixture of D 2 O and CH 3 OD in an absorption cell.

A GPU-Parallelized Eigen-Based Clutter Filter Framework for Ultrasound Color Flow Imaging.

PubMed

Chee, Adrian J Y; Yiu, Billy Y S; Yu, Alfred C H

2017-01-01

Eigen-filters with attenuation response adapted to clutter statistics in color flow imaging (CFI) have shown improved flow detection sensitivity in the presence of tissue motion. Nevertheless, its practical adoption in clinical use is not straightforward due to the high computational cost for solving eigendecompositions. Here, we provide a pedagogical description of how a real-time computing framework for eigen-based clutter filtering can be developed through a single-instruction, multiple data (SIMD) computing approach that can be implemented on a graphical processing unit (GPU). Emphasis is placed on the single-ensemble-based eigen-filtering approach (Hankel singular value decomposition), since it is algorithmically compatible with GPU-based SIMD computing. The key algebraic principles and the corresponding SIMD algorithm are explained, and annotations on how such algorithm can be rationally implemented on the GPU are presented. Real-time efficacy of our framework was experimentally investigated on a single GPU device (GTX Titan X), and the computing throughput for varying scan depths and slow-time ensemble lengths was studied. Using our eigen-processing framework, real-time video-range throughput (24 frames/s) can be attained for CFI frames with full view in azimuth direction (128 scanlines), up to a scan depth of 5 cm ( λ pixel axial spacing) for slow-time ensemble length of 16 samples. The corresponding CFI image frames, with respect to the ones derived from non-adaptive polynomial regression clutter filtering, yielded enhanced flow detection sensitivity in vivo, as demonstrated in a carotid imaging case example. These findings indicate that the GPU-enabled eigen-based clutter filtering can improve CFI flow detection performance in real time.

Development of a takeoff performance monitoring system. Ph.D. Thesis. Contractor Report, Jan. 1984 - Jun. 1985

NASA Technical Reports Server (NTRS)

Srivatsan, Raghavachari; Downing, David R.

1987-01-01

Discussed are the development and testing of a real-time takeoff performance monitoring algorithm. The algorithm is made up of two segments: a pretakeoff segment and a real-time segment. One-time imputs of ambient conditions and airplane configuration information are used in the pretakeoff segment to generate scheduled performance data for that takeoff. The real-time segment uses the scheduled performance data generated in the pretakeoff segment, runway length data, and measured parameters to monitor the performance of the airplane throughout the takeoff roll. Airplane and engine performance deficiencies are detected and annunciated. An important feature of this algorithm is the one-time estimation of the runway rolling friction coefficient. The algorithm was tested using a six-degree-of-freedom airplane model in a computer simulation. Results from a series of sensitivity analyses are also included.

A customizable system for real-time image processing using the Blackfin DSProcessor and the MicroC/OS-II real-time kernel

NASA Astrophysics Data System (ADS)

Coffey, Stephen; Connell, Joseph

2005-06-01

This paper presents a development platform for real-time image processing based on the ADSP-BF533 Blackfin processor and the MicroC/OS-II real-time operating system (RTOS). MicroC/OS-II is a completely portable, ROMable, pre-emptive, real-time kernel. The Blackfin Digital Signal Processors (DSPs), incorporating the Analog Devices/Intel Micro Signal Architecture (MSA), are a broad family of 16-bit fixed-point products with a dual Multiply Accumulate (MAC) core. In addition, they have a rich instruction set with variable instruction length and both DSP and MCU functionality thus making them ideal for media based applications. Using the MicroC/OS-II for task scheduling and management, the proposed system can capture and process raw RGB data from any standard 8-bit greyscale image sensor in soft real-time and then display the processed result using a simple PC graphical user interface (GUI). Additionally, the GUI allows configuration of the image capture rate and the system and core DSP clock rates thereby allowing connectivity to a selection of image sensors and memory devices. The GUI also allows selection from a set of image processing algorithms based in the embedded operating system.

Perturbation analysis of queueing systems with a time-varying arrival rate

NASA Technical Reports Server (NTRS)

Cassandras, Christos G.; Pan, Jie

1991-01-01

The authors consider an M/G/1 queuing with a time-varying arrival rate. The objective is to obtain infinitesimal perturbation analysis (IPA) gradient estimates for various performance measures of interest with respect to certain system parameters. In particular, the authors consider the mean system time over n arrivals and an arrival rate alternating between two values. By choosing a convenient sample path representation of this system, they derive an unbiased IPA gradient estimator which, however, is not consistent, and investigate the nature of this problem.

Markov reward processes

NASA Technical Reports Server (NTRS)

Smith, R. M.

1991-01-01

Numerous applications in the area of computer system analysis can be effectively studied with Markov reward models. These models describe the behavior of the system with a continuous-time Markov chain, where a reward rate is associated with each state. In a reliability/availability model, upstates may have reward rate 1 and down states may have reward rate zero associated with them. In a queueing model, the number of jobs of certain type in a given state may be the reward rate attached to that state. In a combined model of performance and reliability, the reward rate of a state may be the computational capacity, or a related performance measure. Expected steady-state reward rate and expected instantaneous reward rate are clearly useful measures of the Markov reward model. More generally, the distribution of accumulated reward or time-averaged reward over a finite time interval may be determined from the solution of the Markov reward model. This information is of great practical significance in situations where the workload can be well characterized (deterministically, or by continuous functions e.g., distributions). The design process in the development of a computer system is an expensive and long term endeavor. For aerospace applications the reliability of the computer system is essential, as is the ability to complete critical workloads in a well defined real time interval. Consequently, effective modeling of such systems must take into account both performance and reliability. This fact motivates our use of Markov reward models to aid in the development and evaluation of fault tolerant computer systems.

Enhancing Electrophoretic Display Lifetime: Thiol-Polybutadiene Evaporation Barrier Property Response to Network Microstructure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cook, Caitlyn Christian

An evaporation barrier is required to enhance the lifetime of electrophoretic deposition (EPD) displays. As EPD functions on the basis of reversible deposition and resuspension of colloids suspended in a solvent, evaporation of the solvent ultimately leads to device failure. Incorporation of a thiol-polybutadiene elastomer into EPD displays enabled display lifetime surpassing six months in counting and catalyzed rigid display transition into a flexible package. Final flexible display transition to mass production compels an electronic-ink approach to encapsulate display suspension within an elastomer shell. Final thiol-polybutadiene photosensitive resin network microstructure was idealized to be dense, homogeneous, and expose an elasticmore » response to deformation. Research at hand details an approach to understanding microstructural change within display elastomers. Polybutadiene-based resin properties are modified via polymer chain structure, with and without added aromatic urethane methacrylate difunctionality, and in measuring network response to variation in thiol and initiator concentration. Dynamic mechanical analysis results signify that cross-linked segments within a difunctionalized polybutadiene network were on average eight times more elastically active than that of linked segments within a non-functionalized polybutadiene network. Difunctionalized polybutadiene samples also showed a 2.5 times greater maximum elastic modulus than non-functionalized samples. Hybrid polymer composed of both polybutadiene chains encompassed TE-2000 stiffness and B-1000 elasticity for use in encapsulating display suspension. Later experiments measured kinetic and rheological response due to alteration in dithiol cross-linker chain length via real time Fourier transform infrared spectroscopy and real-time dynamic rheology. Distinct differences were discovered between dithiol resin systems, as maximum thiol conversion achieved in short and long chain length dithiols was 86% and 11%, respectively. Oscillatory real-time rheological experiments confirmed a more uniform network to better dissipate applied shear in short chain length dithiol systems, as long chain length dithiols relayed a steep internal stress build-up due to less cross-links and chain entanglements. Thorough understanding of network formation aids the production of a stronger and impermeable elastomeric barrier for preservation of EPD displays.« less

Sample Batch Scripts for Running Jobs on the Peregrine System |

Science.gov Websites

script for a serial job in the debug queue #!/bin/bash #PBS -lnodes=1:ppn=1,walltime=500 #PBS -N test1 limit #PBS -l nodes=1 # one node #PBS -N test1 # Name of job #PBS -A CSC001 # project handle cd #PBS -q short # short queue #PBS -l nodes=4:ppn=24 # Number of nodes, put 24 processes on each #PBS -N

Analysis on preemptive priority retrial queue with two types of customers, balking, optional re-service, single vacation and service interruption

NASA Astrophysics Data System (ADS)

Yuvarani, S.; Saravanarajan, M. C.

2017-11-01

This paper concerned with performance analysis of single server preemptive priority retrial queue with a single vacation where two types of customers are considered and they are called priority customers and ordinary customers. The ordinary customers arrive in batch into the system. The priority customers do not form any queue. After the completion of regular service, the customers may demand re-service for the previous service without joining the orbit or may leave the system. As soon as the system is empty, the server goes for vacation and the regular busy server can be subjected to breakdown. By using the supplementary variable technique, we obtain the steady-state probability generating functions for the system/orbit size. Some important system performance measures and the stochastic decomposition are discussed. Finally, numerical examples are presented to visualize the effect of parameters on system performance measures.

Counter design influences the privacy of patients in health care.

PubMed

Mobach, Mark P

2009-03-01

A re-furnishing of counter areas in primary health care was used to assess patient privacy and its influences on the nature of conversations in a controlled experiment. Patients in two community-based pharmacies in the Netherlands were assigned to enclosed counters and a queue at distance, or to counters that exposed patients mutually and a closer queue. Patients assigned to counters with reduced sight were more satisfied with the privacy than patients at visually exposed counters. However, in comparison with visually exposed pharmacy counters, conversations of patients at enclosed counters could still be overheard and did not have different conversations to other patients. Architectural design of health-care institutions has potential to positively influence perceived patient privacy in areas in where multiple patient-staff communications routinely occur and where patient privacy is an important issue, but enclosed counters with a queue at distance do not prevent incidental disclosure of individually identifiable health information.

The queueing perspective of asynchronous network coding in two-way relay network

NASA Astrophysics Data System (ADS)

Liang, Yaping; Chang, Qing; Li, Xianxu

2018-04-01

Asynchronous network coding (NC) has potential to improve the wireless network performance compared with a routing or the synchronous network coding. Recent researches concentrate on the optimization between throughput/energy consuming and delay with a couple of independent input flow. However, the implementation of NC requires a thorough investigation of its impact on relevant queueing systems where few work focuses on. Moreover, few works study the probability density function (pdf) in network coding scenario. In this paper, the scenario with two independent Poisson input flows and one output flow is considered. The asynchronous NC-based strategy is that a new arrival evicts a head packet holding in its queue when waiting for another packet from the other flow to encode. The pdf for the output flow which contains both coded and uncoded packets is derived. Besides, the statistic characteristics of this strategy are analyzed. These results are verified by numerical simulations.

A 640-MHz 32-megachannel real-time polyphase-FFT spectrum analyzer

NASA Technical Reports Server (NTRS)

Zimmerman, G. A.; Garyantes, M. F.; Grimm, M. J.; Charny, B.

1991-01-01

A polyphase fast Fourier transform (FFT) spectrum analyzer being designed for NASA's Search for Extraterrestrial Intelligence (SETI) Sky Survey at the Jet Propulsion Laboratory is described. By replacing the time domain multiplicative window preprocessing with polyphase filter processing, much of the processing loss of windowed FFTs can be eliminated. Polyphase coefficient memory costs are minimized by effective use of run length compression. Finite word length effects are analyzed, producing a balanced system with 8 bit inputs, 16 bit fixed point polyphase arithmetic, and 24 bit fixed point FFT arithmetic. Fixed point renormalization midway through the computation is seen to be naturally accommodated by the matrix FFT algorithm proposed. Simulation results validate the finite word length arithmetic analysis and the renormalization technique.